Merge branch 'master' into for-next

Sync with Linus' tree so that patches against newer codebase can be applied.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

4020 files changed, 148134 insertions, 72140 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 4e949e58b192..81869a5e7e17 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -205,9 +205,6 @@ config HAVE_NMI_WATCHDOG
 config HAVE_ARCH_TRACEHOOK
 	bool
 
-config HAVE_DMA_ATTRS
-	bool
-
 config HAVE_DMA_CONTIGUOUS
 	bool
 
@@ -511,6 +508,74 @@ config ARCH_HAS_ELF_RANDOMIZE
 	  - arch_mmap_rnd()
 	  - arch_randomize_brk()
 
+config HAVE_ARCH_MMAP_RND_BITS
+	bool
+	help
+	  An arch should select this symbol if it supports setting a variable
+	  number of bits for use in establishing the base address for mmap
+	  allocations, has MMU enabled and provides values for both:
+	  - ARCH_MMAP_RND_BITS_MIN
+	  - ARCH_MMAP_RND_BITS_MAX
+
+config ARCH_MMAP_RND_BITS_MIN
+	int
+
+config ARCH_MMAP_RND_BITS_MAX
+	int
+
+config ARCH_MMAP_RND_BITS_DEFAULT
+	int
+
+config ARCH_MMAP_RND_BITS
+	int "Number of bits to use for ASLR of mmap base address" if EXPERT
+	range ARCH_MMAP_RND_BITS_MIN ARCH_MMAP_RND_BITS_MAX
+	default ARCH_MMAP_RND_BITS_DEFAULT if ARCH_MMAP_RND_BITS_DEFAULT
+	default ARCH_MMAP_RND_BITS_MIN
+	depends on HAVE_ARCH_MMAP_RND_BITS
+	help
+	  This value can be used to select the number of bits to use to
+	  determine the random offset to the base address of vma regions
+	  resulting from mmap allocations. This value will be bounded
+	  by the architecture's minimum and maximum supported values.
+
+	  This value can be changed after boot using the
+	  /proc/sys/vm/mmap_rnd_bits tunable
+
+config HAVE_ARCH_MMAP_RND_COMPAT_BITS
+	bool
+	help
+	  An arch should select this symbol if it supports running applications
+	  in compatibility mode, supports setting a variable number of bits for
+	  use in establishing the base address for mmap allocations, has MMU
+	  enabled and provides values for both:
+	  - ARCH_MMAP_RND_COMPAT_BITS_MIN
+	  - ARCH_MMAP_RND_COMPAT_BITS_MAX
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+	int
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+	int
+
+config ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
+	int
+
+config ARCH_MMAP_RND_COMPAT_BITS
+	int "Number of bits to use for ASLR of mmap base address for compatible applications" if EXPERT
+	range ARCH_MMAP_RND_COMPAT_BITS_MIN ARCH_MMAP_RND_COMPAT_BITS_MAX
+	default ARCH_MMAP_RND_COMPAT_BITS_DEFAULT if ARCH_MMAP_RND_COMPAT_BITS_DEFAULT
+	default ARCH_MMAP_RND_COMPAT_BITS_MIN
+	depends on HAVE_ARCH_MMAP_RND_COMPAT_BITS
+	help
+	  This value can be used to select the number of bits to use to
+	  determine the random offset to the base address of vma regions
+	  resulting from mmap allocations for compatible applications This
+	  value will be bounded by the architecture's minimum and maximum
+	  supported values.
+
+	  This value can be changed after boot using the
+	  /proc/sys/vm/mmap_rnd_compat_bits tunable
+
 config HAVE_COPY_THREAD_TLS
 	bool
 	help
@@ -518,6 +583,12 @@ config HAVE_COPY_THREAD_TLS
 	  normal C parameter passing, rather than extracting the syscall
 	  argument from pt_regs.
 
+config HAVE_STACK_VALIDATION
+	bool
+	help
+	  Architecture supports the 'objtool check' host tool command, which
+	  performs compile-time stack metadata validation.
+
 #
 # ABI hall of shame
 #
@@ -564,4 +635,7 @@ config OLD_SIGACTION
 config COMPAT_OLD_SIGACTION
 	bool
 
+config ARCH_NO_COHERENT_DMA_MMAP
+	bool
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index f515a4dbf7a0..9d8a85801ed1 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -9,7 +9,6 @@ config ALPHA
 	select HAVE_OPROFILE
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
-	select HAVE_DMA_ATTRS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
diff --git a/arch/alpha/include/asm/checksum.h b/arch/alpha/include/asm/checksum.h
index d3854bbf0a9e..f2bbdd2ace51 100644
--- a/arch/alpha/include/asm/checksum.h
+++ b/arch/alpha/include/asm/checksum.h
@@ -13,14 +13,11 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
-extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					   unsigned short len,
-					   unsigned short proto,
-					   __wsum sum);
+__sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+			  __u32 len, __u8 proto, __wsum sum);
 
 __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				unsigned short len, unsigned short proto,
-				__wsum sum);
+			  __u32 len, __u8 proto, __wsum sum);
 
 /*
  * computes the checksum of a memory block at buff, length len,
@@ -70,6 +67,5 @@ static inline __sum16 csum_fold(__wsum csum)
 #define _HAVE_ARCH_IPV6_CSUM
 extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 			       const struct in6_addr *daddr,
-			       __u32 len, unsigned short proto,
-			       __wsum sum);
+			       __u32 len, __u8 proto, __wsum sum);
 #endif
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 72a8ca7796d9..3c3451f58ff4 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -10,8 +10,6 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 	return dma_ops;
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 #define dma_cache_sync(dev, va, size, dir)		  ((void)0)
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/gpio.h b/arch/alpha/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/alpha/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index 98f2eeee8f68..a06c24b3a2e1 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -7,7 +7,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <asm/machvec.h>
-#include <asm-generic/pci-bridge.h>
 
 /*
  * The following structure is used to manage multiple PCI busses.
@@ -66,13 +65,6 @@ extern void pcibios_set_master(struct pci_dev *dev);
    decisions.  */
 #define PCI_DMA_BUS_IS_PHYS  0
 
-#ifdef CONFIG_PCI
-
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
-#endif
-
 /* TODO: integrate with include/asm-generic/pci.h ? */
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h
index 22909b83f473..e31557fc06cc 100644
--- a/arch/alpha/include/asm/serial.h
+++ b/arch/alpha/include/asm/serial.h
@@ -14,11 +14,11 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
 #endif
 
 #define SERIAL_PORT_DFNS			\
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 9b0d40093c9a..c419b43c461d 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -483,7 +483,13 @@ struct exception_table_entry
 	(pc) + (_fixup)->fixup.bits.nextinsn;			\
 })
 
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+#define swap_ex_entry_fixup(a, b, tmp, delta)			\
+	do {							\
+		(a)->fixup.unit = (b)->fixup.unit;		\
+		(b)->fixup.unit = (tmp).fixup.unit;		\
+	} while (0)
+
 
 #endif /* __ALPHA_UACCESS_H */
diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index f2f949671798..fec1947b8dbc 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -49,6 +49,7 @@
 #define MADV_DONTNEED	6		/* don't need these pages */
 
 /* common/generic parameters */
+#define MADV_FREE	8		/* free pages only if memory pressure */
 #define MADV_REMOVE	9		/* remove these pages & resources */
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index 9a20821b111c..9e46d6e656d9 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -92,4 +92,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _UAPI_ASM_SOCKET_H */
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
index 2fd00b7077e4..936bc8f89a67 100644
--- a/arch/alpha/kernel/module.c
+++ b/arch/alpha/kernel/module.c
@@ -160,7 +160,7 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 
 	/* The small sections were sorted to the end of the segment.
 	   The following should definitely cover them.  */
-	gp = (u64)me->module_core + me->core_size - 0x8000;
+	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
 
 	for (i = 0; i < n; i++) {
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index 2b1f4a1e9272..8e735b5e56bd 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -123,44 +123,6 @@ static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
 	return ret;
 }
 
-static void alpha_noop_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_addr,
-				     struct dma_attrs *attrs)
-{
-	free_pages((unsigned long)cpu_addr, get_order(size));
-}
-
-static dma_addr_t alpha_noop_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction dir,
-				      struct dma_attrs *attrs)
-{
-	return page_to_pa(page) + offset;
-}
-
-static int alpha_noop_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
-			     enum dma_data_direction dir, struct dma_attrs *attrs)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sgl, sg, nents, i) {
-		void *va;
-
-		BUG_ON(!sg_page(sg));
-		va = sg_virt(sg);
-		sg_dma_address(sg) = (dma_addr_t)virt_to_phys(va);
-		sg_dma_len(sg) = sg->length;
-	}
-
-	return nents;
-}
-
-static int alpha_noop_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
 static int alpha_noop_supported(struct device *dev, u64 mask)
 {
 	return mask < 0x00ffffffUL ? 0 : 1;
@@ -168,10 +130,10 @@ static int alpha_noop_supported(struct device *dev, u64 mask)
 
 struct dma_map_ops alpha_noop_ops = {
 	.alloc			= alpha_noop_alloc_coherent,
-	.free			= alpha_noop_free_coherent,
-	.map_page		= alpha_noop_map_page,
-	.map_sg			= alpha_noop_map_sg,
-	.mapping_error		= alpha_noop_mapping_error,
+	.free			= dma_noop_free_coherent,
+	.map_page		= dma_noop_map_page,
+	.map_sg			= dma_noop_map_sg,
+	.mapping_error		= dma_noop_mapping_error,
 	.dma_supported		= alpha_noop_supported,
 };
 
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 2f24447fef92..46bf263c3153 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -168,7 +168,7 @@ smp_callin(void)
 	      cpuid, current, current->active_mm));
 
 	preempt_disable();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 /* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */
diff --git a/arch/alpha/lib/checksum.c b/arch/alpha/lib/checksum.c
index 199f6efa83fa..377f9e34eb97 100644
--- a/arch/alpha/lib/checksum.c
+++ b/arch/alpha/lib/checksum.c
@@ -42,9 +42,7 @@ static inline unsigned short from64to16(unsigned long x)
  * returns a 16-bit checksum, already complemented.
  */
 __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-				   unsigned short len,
-				   unsigned short proto,
-				   __wsum sum)
+			  __u32 len, __u8 proto, __wsum sum)
 {
 	return (__force __sum16)~from64to16(
 		(__force u64)saddr + (__force u64)daddr +
@@ -52,9 +50,7 @@ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
 }
 
 __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-				   unsigned short len,
-				   unsigned short proto,
-				   __wsum sum)
+			  __u32 len, __u8 proto, __wsum sum)
 {
 	unsigned long result;
 
diff --git a/arch/alpha/mm/Makefile b/arch/alpha/mm/Makefile
index c993d3f93cf6..5a9807936411 100644
--- a/arch/alpha/mm/Makefile
+++ b/arch/alpha/mm/Makefile
@@ -4,6 +4,6 @@
 
 ccflags-y := -Werror
 
-obj-y	:= init.o fault.o extable.o
+obj-y	:= init.o fault.o
 
 obj-$(CONFIG_DISCONTIGMEM) += numa.o
diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c
deleted file mode 100644
index 813c9b63c0e1..000000000000
--- a/arch/alpha/mm/extable.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * linux/arch/alpha/mm/extable.c
- */
-
-#include <linux/module.h>
-#include <linux/sort.h>
-#include <asm/uaccess.h>
-
-static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
-{
-	return (unsigned long)&x->insn + x->insn;
-}
-
-static void swap_ex(void *a, void *b, int size)
-{
-	struct exception_table_entry *ex_a = a, *ex_b = b;
-	unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
-	unsigned int t = ex_a->fixup.unit;
-
-	ex_a->fixup.unit = ex_b->fixup.unit;
-	ex_b->fixup.unit = t;
-	ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
-	ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
-}
-
-/*
- * The exception table needs to be sorted so that the binary
- * search that we use to find entries in it works properly.
- * This is used both for the kernel exception table and for
- * the exception tables of modules that get loaded.
- */
-static int cmp_ex(const void *a, const void *b)
-{
-	const struct exception_table_entry *x = a, *y = b;
-
-	/* avoid overflow */
-	if (ex_to_addr(x) > ex_to_addr(y))
-		return 1;
-	if (ex_to_addr(x) < ex_to_addr(y))
-		return -1;
-	return 0;
-}
-
-void sort_extable(struct exception_table_entry *start,
-		  struct exception_table_entry *finish)
-{
-	sort(start, finish - start, sizeof(struct exception_table_entry),
-	     cmp_ex, swap_ex);
-}
-
-#ifdef CONFIG_MODULES
-/*
- * Any entry referring to the module init will be at the beginning or
- * the end.
- */
-void trim_init_extable(struct module *m)
-{
-	/*trim the beginning*/
-	while (m->num_exentries &&
-	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
-		m->extable++;
-		m->num_exentries--;
-	}
-	/*trim the end*/
-	while (m->num_exentries &&
-	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
-				  m))
-		m->num_exentries--;
-}
-#endif /* CONFIG_MODULES */
-
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-        while (first <= last) {
-		const struct exception_table_entry *mid;
-		unsigned long mid_value;
-
-		mid = (last - first) / 2 + first;
-		mid_value = ex_to_addr(mid);
-                if (mid_value == value)
-                        return mid;
-                else if (mid_value < value)
-                        first = mid+1;
-                else
-                        last = mid-1;
-        }
-
-        return NULL;
-}
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 2c2ac3f3ff80..12d0284a46e5 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -12,13 +12,12 @@ config ARC
 	select BUILDTIME_EXTABLE_SORT
 	select COMMON_CLK
 	select CLONE_BACKWARDS
-	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
-	select DEVTMPFS if !INITRAMFS_SOURCE=""
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_FIND_FIRST_BIT
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
@@ -39,6 +38,9 @@ config ARC
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_STACKOVERFLOW
 
+config MIGHT_HAVE_PCI
+	bool
+
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
@@ -73,9 +75,6 @@ config STACKTRACE_SUPPORT
 	def_bool y
 	select STACKTRACE
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	def_bool y
 	depends on ARC_MMU_V4
@@ -278,14 +277,6 @@ config ARC_DCCM_BASE
 	default "0xA0000000"
 	depends on ARC_HAS_DCCM
 
-config ARC_HAS_HW_MPY
-	bool "Use Hardware Multiplier (Normal or Faster XMAC)"
-	default y
-	help
-	  Influences how gcc generates code for MPY operations.
-	  If enabled, MPYxx insns are generated, provided by Standard/XMAC
-	  Multipler. Otherwise software multipy lib is used
-
 choice
 	prompt "MMU Version"
 	default ARC_MMU_V3 if ARC_CPU_770
@@ -341,6 +332,19 @@ config ARC_PAGE_SIZE_4K
 
 endchoice
 
+choice
+	prompt "MMU Super Page Size"
+	depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
+	default ARC_HUGEPAGE_2M
+
+config ARC_HUGEPAGE_2M
+	bool "2MB"
+
+config ARC_HUGEPAGE_16M
+	bool "16MB"
+
+endchoice
+
 if ISA_ARCOMPACT
 
 config ARC_COMPACT_IRQ_LEVELS
@@ -387,7 +391,7 @@ config ARC_HAS_LLSC
 
 config ARC_STAR_9000923308
 	bool "Workaround for llock/scond livelock"
-	default y
+	default n
 	depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
 
 config ARC_HAS_SWAPE
@@ -413,7 +417,7 @@ config ARC_HAS_RTC
 	default n
 	depends on !SMP
 
-config ARC_HAS_GRTC
+config ARC_HAS_GFRC
 	bool "SMP synchronized 64-bit cycle counter"
 	default y
 	depends on SMP
@@ -445,6 +449,7 @@ config LINUX_LINK_BASE
 	  However some customers have peripherals mapped at this addr, so
 	  Linux needs to be scooted a bit.
 	  If you don't know what the above means, leave this setting alone.
+	  This needs to match memory start address specified in Device Tree
 
 config HIGHMEM
 	bool "High Memory Support"
@@ -457,7 +462,6 @@ config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
 	default n
 	depends on ISA_ARCV2
-	select HIGHMEM
 	help
 	  Enable access to physical memory beyond 4G, only supported on
 	  ARC cores with 40 bit Physical Addressing support
@@ -468,6 +472,9 @@ config ARCH_PHYS_ADDR_T_64BIT
 config ARCH_DMA_ADDR_T_64BIT
 	bool
 
+config ARC_PLAT_NEEDS_PHYS_TO_DMA
+	bool
+
 config ARC_CURR_IN_REG
 	bool "Dedicate Register r25 for current_task pointer"
 	default y
@@ -531,14 +538,6 @@ config ARC_DBG_TLB_MISS_COUNT
 	  Counts number of I and D TLB Misses and exports them via Debugfs
 	  The counters can be cleared via Debugfs as well
 
-if SMP
-
-config ARC_IPI_DBG
-	bool "Debug Inter Core interrupts"
-	default n
-
-endif
-
 endif
 
 config ARC_UBOOT_SUPPORT
@@ -568,8 +567,35 @@ endmenu
 endmenu	 # "ARC Architecture Configuration"
 
 source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	default "12" if ARC_HUGEPAGE_16M
+	default "11"
+
 source "net/Kconfig"
 source "drivers/Kconfig"
+
+menu "Bus Support"
+
+config PCI
+	bool "PCI support" if MIGHT_HAVE_PCI
+	help
+	  PCI is the name of a bus system, i.e., the way the CPU talks to
+	  the other stuff inside your box.  Find out if your board/platform
+	  has PCI.
+
+	  Note: PCIe support for Synopsys Device will be available only
+	  when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
+	  say Y, otherwise N.
+
+config PCI_SYSCALL
+	def_bool PCI
+
+source "drivers/pci/Kconfig"
+
+endmenu
+
 source "fs/Kconfig"
 source "arch/arc/Kconfig.debug"
 source "security/Kconfig"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index cf0cf34eeb24..def69e347b2d 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -9,7 +9,11 @@
 UTS_MACHINE := arc
 
 ifeq ($(CROSS_COMPILE),)
+ifndef CONFIG_CPU_BIG_ENDIAN
 CROSS_COMPILE := arc-linux-
+else
+CROSS_COMPILE := arceb-linux-
+endif
 endif
 
 KBUILD_DEFCONFIG := nsim_700_defconfig
@@ -18,6 +22,20 @@ cflags-y	+= -fno-common -pipe -fno-builtin -D__linux__
 cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
 cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=archs
 
+is_700 = $(shell $(CC) -dM -E - < /dev/null | grep -q "ARC700" && echo 1 || echo 0)
+
+ifdef CONFIG_ISA_ARCOMPACT
+ifeq ($(is_700), 0)
+    $(error Toolchain not configured for ARCompact builds)
+endif
+endif
+
+ifdef CONFIG_ISA_ARCV2
+ifeq ($(is_700), 1)
+    $(error Toolchain not configured for ARCv2 builds)
+endif
+endif
+
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register defintion, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using
@@ -58,7 +76,9 @@ endif
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
 # Note: No need to add to cflags-y as that happens anyways
-ARCH_CFLAGS += -O3
+#
+# Disable the false maybe-uninitialized warings gcc spits out at -O3
+ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,)
 endif
 
 # small data is default for elf32 tool-chain. If not usable, disable it
@@ -74,14 +94,10 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
 # --build-id w/o "-marclinux". Default arc-elf32-ld is OK
 ldflags-$(upto_gcc44)			+= -marclinux
 
-ifndef CONFIG_ARC_HAS_HW_MPY
-	cflags-y	+= -mno-mpy
-endif
-
 LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel
-KBUILD_CFLAGS_MODULE	+= -mlong-calls
+KBUILD_CFLAGS_MODULE	+= -mlong-calls -mno-millicode
 
 # Finally dump eveything into kernel build system
 KBUILD_CFLAGS	+= $(cflags-y)
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index f3db32154973..44a578c10732 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -46,6 +46,7 @@
 			snps,pbl = < 32 >;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
+			max-speed = <100>;
 		};
 
 		ehci@0x40000 {
diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts
index b0eb0e7fe21d..f46633eeb06b 100644
--- a/arch/arc/boot/dts/nsim_hs.dts
+++ b/arch/arc/boot/dts/nsim_hs.dts
@@ -17,7 +17,8 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000	/* 1 GB low mem */
+		/* CONFIG_LINUX_LINK_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
 		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
 	};
 
@@ -34,7 +35,8 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		/* only perip space at end of low mem accessible */
+		/* only perip space at end of low mem accessible
+			 bus addr,   parent bus addr, size */
 		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 
 		core_intc: core-interrupt-controller {
diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts
index 1c169dc74ad1..d94b4ce516ad 100644
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@@ -65,10 +65,9 @@
 		};
 
 		eth0: ethernet@f0003000 {
-			compatible = "snps,oscilan";
+			compatible = "ezchip,nps-mgt-enet";
 			reg = <0xf0003000 0x44>;
-			interrupts = <7>, <8>;
-			interrupt-names = "rx", "tx";
+			interrupts = <7>;
 		};
 	};
 };
diff --git a/arch/arc/boot/dts/nsimosci_hs.dts b/arch/arc/boot/dts/nsimosci_hs.dts
index d64a96f8515a..034a3139c1e2 100644
--- a/arch/arc/boot/dts/nsimosci_hs.dts
+++ b/arch/arc/boot/dts/nsimosci_hs.dts
@@ -65,10 +65,9 @@
 		};
 
 		eth0: ethernet@f0003000 {
-			compatible = "snps,oscilan";
+			compatible = "ezchip,nps-mgt-enet";
 			reg = <0xf0003000 0x44>;
-			interrupts = <25>, <26>;
-			interrupt-names = "rx", "tx";
+			interrupts = <25>;
 		};
 
 		arcpct0: pct {
diff --git a/arch/arc/boot/dts/nsimosci_hs_idu.dts b/arch/arc/boot/dts/nsimosci_hs_idu.dts
index f6bf0ca95a57..8a1297e02540 100644
--- a/arch/arc/boot/dts/nsimosci_hs_idu.dts
+++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts
@@ -85,11 +85,10 @@
 		};
 
 		eth0: ethernet@f0003000 {
-			compatible = "snps,oscilan";
+			compatible = "ezchip,nps-mgt-enet";
 			reg = <0xf0003000 0x44>;
 			interrupt-parent = <&idu_intc>;
-			interrupts = <1 2>, <2 2>;
-			interrupt-names = "rx", "tx";
+			interrupts = <1 2>;
 		};
 
 		arcpct0: pct {
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index c92c0ef1e9d2..6cdffea3a914 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -39,6 +38,7 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -73,7 +73,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
@@ -91,12 +90,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index cfac24e0e7b6..491b3b5f22bd 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -39,14 +38,11 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AXS=y
+CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -78,14 +74,12 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -97,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index 9922a118a15a..b25ee73b2e79 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -40,14 +39,11 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AXS=y
+CONFIG_BLK_DEV_LOOP=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -79,14 +75,12 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -98,12 +92,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
index 138f9d887957..7314f538847b 100644
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -1,9 +1,9 @@
-CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -26,7 +26,6 @@ CONFIG_ARC_PLAT_SIM=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,6 +33,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -51,7 +51,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -63,4 +62,3 @@ CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_XZ_DEC=y
diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig
index f761a7c70761..a99dc7a3f0af 100644
--- a/arch/arc/configs/nsim_hs_defconfig
+++ b/arch/arc/configs/nsim_hs_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
@@ -35,6 +34,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -49,7 +49,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -61,4 +60,3 @@ CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_XZ_DEC=y
diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig
index dc6f74f41283..59f221fc9a41 100644
--- a/arch/arc/configs/nsim_hs_smp_defconfig
+++ b/arch/arc/configs/nsim_hs_smp_defconfig
@@ -1,7 +1,7 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -21,13 +21,11 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_SIM=y
-CONFIG_ARC_BOARD_ML509=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -35,6 +33,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -49,7 +48,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -60,4 +58,3 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_XZ_DEC=y
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
index 31e1d95764ff..42bafa552498 100644
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
@@ -33,11 +32,13 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
+CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2_ALPS is not set
@@ -58,7 +59,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
index 3fef0a210c56..4bb60c1cd4a2 100644
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
@@ -34,12 +33,13 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_OSCI_LAN=y
+CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2_ALPS is not set
 # CONFIG_MOUSE_PS2_LOGIPS2PP is not set
@@ -58,7 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
index 51784837daae..7e88f4c720f8 100644
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -1,7 +1,7 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -18,15 +18,12 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_SIM=y
-CONFIG_ARC_BOARD_ML509=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_HAS_LL64=y
-# CONFIG_ARC_HAS_RTSC is not set
+# CONFIG_ARC_HAS_GFRC is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_DIAG=y
@@ -40,6 +37,7 @@ CONFIG_INET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -48,6 +46,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
@@ -56,14 +55,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_NET_OSCI_LAN=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_ARC_PS2=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
@@ -75,9 +71,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
index 3b4dc9cebcf1..4c5118384eb5 100644
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -1,8 +1,8 @@
-CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="tb10x"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -26,12 +26,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLOCK is not set
 CONFIG_ARC_PLAT_TB10X=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
-CONFIG_ARC_STACK_NONEXEC=y
 CONFIG_HZ=250
 CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,8 +42,8 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PROC_DEVICETREE=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -55,9 +53,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_DEBUG_FS=y
-CONFIG_STMMAC_DA=y
-CONFIG_STMMAC_CHAINED=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
@@ -91,7 +86,6 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
-CONFIG_NET_DMA=y
 CONFIG_ASYNC_TX_DMA=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
@@ -100,17 +94,16 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index ef35ef3923dd..c0d6a010751a 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 634509e5e572..52ec315dc5c9 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -1,4 +1,3 @@
-CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_CROSS_MEMORY_ATTACH is not set
@@ -16,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_HAS_GRTC is not set
+# CONFIG_ARC_HAS_GFRC is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 7fac7d85ed6a..7fbaea00a336 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -10,7 +10,8 @@
 #define _ASM_ARC_ARCREGS_H
 
 /* Build Configuration Registers */
-#define ARC_REG_DCCMBASE_BCR	0x61	/* DCCM Base Addr */
+#define ARC_REG_AUX_DCCM	0x18	/* DCCM Base Addr ARCv2 */
+#define ARC_REG_DCCM_BASE_BUILD	0x61	/* DCCM Base Addr ARCompact */
 #define ARC_REG_CRC_BCR		0x62
 #define ARC_REG_VECBASE_BCR	0x68
 #define ARC_REG_PERIBASE_BCR	0x69
@@ -18,10 +19,10 @@
 #define ARC_REG_DPFP_BCR	0x6C	/* ARCompact: Dbl Precision FPU */
 #define ARC_REG_FP_V2_BCR	0xc8	/* ARCv2 FPU */
 #define ARC_REG_SLC_BCR		0xce
-#define ARC_REG_DCCM_BCR	0x74	/* DCCM Present + SZ */
+#define ARC_REG_DCCM_BUILD	0x74	/* DCCM size (common) */
 #define ARC_REG_TIMERS_BCR	0x75
 #define ARC_REG_AP_BCR		0x76
-#define ARC_REG_ICCM_BCR	0x78
+#define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
 #define ARC_REG_XY_MEM_BCR	0x79
 #define ARC_REG_MAC_BCR		0x7a
 #define ARC_REG_MUL_BCR		0x7b
@@ -36,6 +37,7 @@
 #define ARC_REG_IRQ_BCR		0xF3
 #define ARC_REG_SMART_BCR	0xFF
 #define ARC_REG_CLUSTER_BCR	0xcf
+#define ARC_REG_AUX_ICCM	0x208	/* ICCM Base Addr (ARCv2) */
 
 /* status32 Bits Positions */
 #define STATUS_AE_BIT		5	/* Exception active */
@@ -246,7 +248,7 @@ struct bcr_perip {
 #endif
 };
 
-struct bcr_iccm {
+struct bcr_iccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int base:16, pad:5, sz:3, ver:8;
 #else
@@ -254,17 +256,15 @@ struct bcr_iccm {
 #endif
 };
 
-/* DCCM Base Address Register: ARC_REG_DCCMBASE_BCR */
-struct bcr_dccm_base {
+struct bcr_iccm_arcv2 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int addr:24, ver:8;
+	unsigned int pad:8, sz11:4, sz01:4, sz10:4, sz00:4, ver:8;
 #else
-	unsigned int ver:8, addr:24;
+	unsigned int ver:8, sz00:4, sz10:4, sz01:4, sz11:4, pad:8;
 #endif
 };
 
-/* DCCM RAM Configuration Register: ARC_REG_DCCM_BCR */
-struct bcr_dccm {
+struct bcr_dccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int res:21, sz:3, ver:8;
 #else
@@ -272,6 +272,14 @@ struct bcr_dccm {
 #endif
 };
 
+struct bcr_dccm_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:12, cyc:3, pad1:1, sz1:4, sz0:4, ver:8;
+#else
+	unsigned int ver:8, sz0:4, sz1:4, pad1:1, cyc:3, pad2:12;
+#endif
+};
+
 /* ARCompact: Both SP and DP FPU BCRs have same format */
 struct bcr_fp_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
@@ -315,9 +323,9 @@ struct bcr_bpu_arcv2 {
 
 struct bcr_generic {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int pad:24, ver:8;
+	unsigned int info:24, ver:8;
 #else
-	unsigned int ver:8, pad:24;
+	unsigned int ver:8, info:24;
 #endif
 };
 
@@ -349,14 +357,13 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
 	struct bcr_isa isa;
-	struct bcr_timer timers;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
 			     fpu_sp:1, fpu_dp:1, pad2:6,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
-			     pad4:8;
+			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
 	struct bcr_mpy extn_mpy;
 	struct bcr_extn_xymem extn_xymem;
@@ -374,12 +381,6 @@ static inline int is_isa_arcompact(void)
 	return IS_ENABLED(CONFIG_ISA_ARCOMPACT);
 }
 
-#if defined(CONFIG_ISA_ARCOMPACT) && !defined(_CPU_DEFAULT_A7)
-#error "Toolchain not configured for ARCompact builds"
-#elif defined(CONFIG_ISA_ARCV2) && !defined(_CPU_DEFAULT_HS)
-#error "Toolchain not configured for ARCv2 builds"
-#endif
-
 #endif /* __ASEMBLY__ */
 
 #endif /* _ASM_ARC_ARCREGS_H */
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 57c1f33844d4..0352fb8d21b9 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -35,21 +35,6 @@ static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
 									\
 	m += nr >> 5;							\
 									\
-	/*								\
-	 * ARC ISA micro-optimization:					\
-	 *								\
-	 * Instructions dealing with bitpos only consider lower 5 bits	\
-	 * e.g (x << 33) is handled like (x << 1) by ASL instruction	\
-	 *  (mem pointer still needs adjustment to point to next word)	\
-	 *								\
-	 * Hence the masking to clamp @nr arg can be elided in general.	\
-	 *								\
-	 * However if @nr is a constant (above assumed in a register),	\
-	 * and greater than 31, gcc can optimize away (x << 33) to 0,	\
-	 * as overflow, given the 32-bit ISA. Thus masking needs to be	\
-	 * done for const @nr, but no code is generated due to gcc	\
-	 * const prop.							\
-	 */								\
 	nr &= 0x1f;							\
 									\
 	__asm__ __volatile__(						\
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index abf06e81c929..23706c635c30 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -54,6 +54,7 @@ extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
 extern void read_decode_cache_bcr(void);
 
 extern int ioc_exists;
+extern unsigned long perip_base;
 
 #endif	/* !__ASSEMBLY__ */
 
@@ -62,9 +63,7 @@ extern int ioc_exists;
 #define ARC_REG_IC_IVIC		0x10
 #define ARC_REG_IC_CTRL		0x11
 #define ARC_REG_IC_IVIL		0x19
-#if defined(CONFIG_ARC_MMU_V3) || defined(CONFIG_ARC_MMU_V4)
 #define ARC_REG_IC_PTAG		0x1E
-#endif
 #define ARC_REG_IC_PTAG_HI	0x1F
 
 /* Bit val in IC_CTRL */
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index fbe3587c4f36..a093adbdb017 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -40,9 +40,9 @@ void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
 
 void flush_dcache_page(struct page *page);
 
-void dma_cache_wback_inv(unsigned long start, unsigned long sz);
-void dma_cache_inv(unsigned long start, unsigned long sz);
-void dma_cache_wback(unsigned long start, unsigned long sz);
+void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
+void dma_cache_inv(phys_addr_t start, unsigned long sz);
+void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
diff --git a/arch/arc/include/asm/checksum.h b/arch/arc/include/asm/checksum.h
index 10957298b7a3..913eb4aab05b 100644
--- a/arch/arc/include/asm/checksum.h
+++ b/arch/arc/include/asm/checksum.h
@@ -70,8 +70,8 @@ ip_fast_csum(const void *iph, unsigned int ihl)
  * SA [4], DA [4], zeroes [1], Proto[1], TCP Seg(hdr+data) Len [2]
  */
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	__asm__ __volatile__(
 	"	add.f %0, %0, %1	\n"
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index af7a2db139c9..a444be67cd53 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -149,7 +149,7 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
  * Since xchg() doesn't always do that, it would seem that following defintion
  * is incorrect. But here's the rationale:
  *   SMP : Even xchg() takes the atomic_ops_lock, so OK.
- *   LLSC: atomic_ops_lock are not relevent at all (even if SMP, since LLSC
+ *   LLSC: atomic_ops_lock are not relevant at all (even if SMP, since LLSC
  *         is natively "SMP safe", no serialization required).
  *   UP  : other atomics disable IRQ, so no way a difft ctxt atomic_xchg()
  *         could clobber them. atomic_xchg() itself would be 1 insn, so it
diff --git a/arch/arc/include/asm/dma-mapping.h b/arch/arc/include/asm/dma-mapping.h
index 2d28ba939d8e..266f11c9bd59 100644
--- a/arch/arc/include/asm/dma-mapping.h
+++ b/arch/arc/include/asm/dma-mapping.h
@@ -11,192 +11,18 @@
 #ifndef ASM_ARC_DMA_MAPPING_H
 #define ASM_ARC_DMA_MAPPING_H
 
-#include <asm-generic/dma-coherent.h>
-#include <asm/cacheflush.h>
-
-void *dma_alloc_noncoherent(struct device *dev, size_t size,
-			    dma_addr_t *dma_handle, gfp_t gfp);
-
-void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
-			  dma_addr_t dma_handle);
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp);
-
-void dma_free_coherent(struct device *dev, size_t size, void *kvaddr,
-		       dma_addr_t dma_handle);
-
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
-/*
- * streaming DMA Mapping API...
- * CPU accesses page via normal paddr, thus needs to explicitly made
- * consistent before each use
- */
-
-static inline void __inline_dma_cache_sync(unsigned long paddr, size_t size,
-					   enum dma_data_direction dir)
-{
-	switch (dir) {
-	case DMA_FROM_DEVICE:
-		dma_cache_inv(paddr, size);
-		break;
-	case DMA_TO_DEVICE:
-		dma_cache_wback(paddr, size);
-		break;
-	case DMA_BIDIRECTIONAL:
-		dma_cache_wback_inv(paddr, size);
-		break;
-	default:
-		pr_err("Invalid DMA dir [%d] for OP @ %lx\n", dir, paddr);
-	}
-}
-
-void __arc_dma_cache_sync(unsigned long paddr, size_t size,
-			  enum dma_data_direction dir);
-
-#define _dma_cache_sync(addr, sz, dir)			\
-do {							\
-	if (__builtin_constant_p(dir))			\
-		__inline_dma_cache_sync(addr, sz, dir);	\
-	else						\
-		__arc_dma_cache_sync(addr, sz, dir);	\
-}							\
-while (0);
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-	       enum dma_data_direction dir)
-{
-	_dma_cache_sync((unsigned long)cpu_addr, size, dir);
-	return (dma_addr_t)cpu_addr;
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-		 size_t size, enum dma_data_direction dir)
-{
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction dir)
-{
-	unsigned long paddr = page_to_phys(page) + offset;
-	return dma_map_single(dev, (void *)paddr, size, dir);
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
-	       size_t size, enum dma_data_direction dir)
-{
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg,
-	   int nents, enum dma_data_direction dir)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i)
-		s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
-					       s->length, dir);
-
-	return nents;
-}
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-	     int nents, enum dma_data_direction dir)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nents, i)
-		dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			size_t size, enum dma_data_direction dir)
-{
-	_dma_cache_sync(dma_handle, size, DMA_FROM_DEVICE);
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-			   size_t size, enum dma_data_direction dir)
-{
-	_dma_cache_sync(dma_handle, size, DMA_TO_DEVICE);
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction direction)
-{
-	_dma_cache_sync(dma_handle + offset, size, DMA_FROM_DEVICE);
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
-{
-	_dma_cache_sync(dma_handle + offset, size, DMA_TO_DEVICE);
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, int nelems,
-		    enum dma_data_direction dir)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nelems, i)
-		_dma_cache_sync((unsigned int)sg_virt(sg), sg->length, dir);
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
-		       int nelems, enum dma_data_direction dir)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nelems, i)
-		_dma_cache_sync((unsigned int)sg_virt(sg), sg->length, dir);
-}
-
-static inline int dma_supported(struct device *dev, u64 dma_mask)
-{
-	/* Support 32 bit DMA mask exclusively */
-	return dma_mask == DMA_BIT_MASK(32);
-}
+#ifndef CONFIG_ARC_PLAT_NEEDS_PHYS_TO_DMA
+#define plat_dma_to_phys(dev, dma_handle) ((phys_addr_t)(dma_handle))
+#define plat_phys_to_dma(dev, paddr) ((dma_addr_t)(paddr))
+#else
+#include <plat/dma.h>
+#endif
 
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
+extern struct dma_map_ops arc_dma_ops;
 
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
+	return &arc_dma_ops;
 }
 
 #endif
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
index ca7c45181de9..01e47a69b034 100644
--- a/arch/arc/include/asm/dma.h
+++ b/arch/arc/include/asm/dma.h
@@ -10,5 +10,10 @@
 #define ASM_ARC_DMA_H
 
 #define MAX_DMA_ADDRESS 0xC0000000
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	0
+#endif
 
 #endif
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 1aff3be91075..1d8f57cd6057 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -231,7 +231,7 @@
 	/* free up r9 as scratchpad */
 	PROLOG_FREEUP_REG r9, @int\LVL\()_saved_reg
 
-	/* Which mode (user/kernel) was the system in when intr occured */
+	/* Which mode (user/kernel) was the system in when intr occurred */
 	lr  r9, [status32_l\LVL\()]
 
 	SWITCH_TO_KERNEL_STK
diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h
new file mode 100644
index 000000000000..bd3f68c9ddfc
--- /dev/null
+++ b/arch/arc/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index c5094de86403..7afe3356b770 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -30,19 +30,16 @@ static inline pmd_t pte_pmd(pte_t pte)
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
 #define pmd_mkhuge(pmd)		pte_pmd(pte_mkhuge(pmd_pte(pmd)))
 #define pmd_mknotpresent(pmd)	pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
-#define pmd_mksplitting(pmd)	pte_pmd(pte_mkspecial(pmd_pte(pmd)))
 #define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
 
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
-#define pmd_special(pmd)	pte_special(pmd_pte(pmd))
 
 #define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
 
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) & _PAGE_HW_SZ)
-#define pmd_trans_splitting(pmd)	(pmd_trans_huge(pmd) && pmd_special(pmd))
 
 #define pfn_pmd(pfn, prot)	(__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
 
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 694ece8a0243..17f85c9c73cf 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -13,9 +13,18 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 
-extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
-extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
+extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
+extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 				  unsigned long flags);
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *)port;
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+}
+
 extern void iounmap(const void __iomem *addr);
 
 #define ioremap_nocache(phy, sz)	ioremap(phy, sz)
@@ -129,15 +138,23 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 /*
- * Relaxed API for drivers which can handle any ordering themselves
+ * Relaxed API for drivers which can handle barrier ordering themselves
+ *
+ * Also these are defined to perform little endian accesses.
+ * To provide the typical device register semantics of fixed endian,
+ * swap the byte order for Big Endian
+ *
+ * http://lkml.kernel.org/r/201603100845.30602.arnd@arndb.de
  */
 #define readb_relaxed(c)	__raw_readb(c)
-#define readw_relaxed(c)	__raw_readw(c)
-#define readl_relaxed(c)	__raw_readl(c)
+#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \
+					__raw_readw(c)); __r; })
+#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \
+					__raw_readl(c)); __r; })
 
 #define writeb_relaxed(v,c)	__raw_writeb(v,c)
-#define writew_relaxed(v,c)	__raw_writew(v,c)
-#define writel_relaxed(v,c)	__raw_writel(v,c)
+#define writew_relaxed(v,c)	__raw_writew((__force u16) cpu_to_le16(v),c)
+#define writel_relaxed(v,c)	__raw_writel((__force u32) cpu_to_le32(v),c)
 
 #include <asm-generic/io.h>
 
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 4fd7d62a6e30..49014f0ef36d 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -16,11 +16,9 @@
 #ifdef CONFIG_ISA_ARCOMPACT
 #define TIMER0_IRQ      3
 #define TIMER1_IRQ      4
-#define IPI_IRQ		(NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
 #else
 #define TIMER0_IRQ      16
 #define TIMER1_IRQ      17
-#define IPI_IRQ         19
 #endif
 
 #include <linux/interrupt.h>
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
index ad481c24070d..37c2f751eebf 100644
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -22,6 +22,7 @@
 #define AUX_IRQ_CTRL		0x00E
 #define AUX_IRQ_ACT		0x043	/* Active Intr across all levels */
 #define AUX_IRQ_LVL_PEND	0x200	/* Pending Intr across all levels */
+#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
 #define AUX_IRQ_PRIORITY	0x206
 #define ICAUSE			0x40a
 #define AUX_IRQ_SELECT		0x40b
@@ -30,13 +31,19 @@
 /* Was Intr taken in User Mode */
 #define AUX_IRQ_ACT_BIT_U	31
 
-/* 0 is highest level, but taken by FIRQs, if present in design */
-#define ARCV2_IRQ_DEF_PRIO		0
+/*
+ * User space should be interruptable even by lowest prio interrupt
+ * Safe even if actual interrupt priorities is fewer or even one
+ */
+#define ARCV2_IRQ_DEF_PRIO	15
 
 /* seed value for status register */
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
+/* SLEEP needs default irq priority (<=) which can interrupt the doze */
+#define ISA_SLEEP_ARG		(0x10 | ARCV2_IRQ_DEF_PRIO)
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -109,6 +116,16 @@ static inline int arch_irqs_disabled(void)
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
+static inline void arc_softirq_trigger(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, irq);
+}
+
+static inline void arc_softirq_clear(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, 0);
+}
+
 #else
 
 .macro IRQ_DISABLE  scratch
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index d8c608174617..c1d36458bfb7 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -43,6 +43,8 @@
 
 #define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
 
+#define ISA_SLEEP_ARG		0x3
+
 #ifndef __ASSEMBLY__
 
 /******************************************************************
diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h
index 6ff657a904b6..c28e6c347b49 100644
--- a/arch/arc/include/asm/mach_desc.h
+++ b/arch/arc/include/asm/mach_desc.h
@@ -23,7 +23,7 @@
  * @dt_compat:		Array of device tree 'compatible' strings
  * 			(XXX: although only 1st entry is looked at)
  * @init_early:		Very early callback [called from setup_arch()]
- * @init_cpu_smp:	for each CPU as it is coming up (SMP as well as UP)
+ * @init_per_cpu:	for each CPU as it is coming up (SMP as well as UP)
  * 			[(M):init_IRQ(), (o):start_kernel_secondary()]
  * @init_machine:	arch initcall level callback (e.g. populate static
  * 			platform devices or parse Devicetree)
@@ -35,7 +35,7 @@ struct machine_desc {
 	const char		**dt_compat;
 	void			(*init_early)(void);
 #ifdef CONFIG_SMP
-	void			(*init_cpu_smp)(unsigned int);
+	void			(*init_per_cpu)(unsigned int);
 #endif
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h
index 46f4e5351b2a..847e3bbe387f 100644
--- a/arch/arc/include/asm/mcip.h
+++ b/arch/arc/include/asm/mcip.h
@@ -39,8 +39,8 @@ struct mcip_cmd {
 #define CMD_DEBUG_SET_MASK		0x34
 #define CMD_DEBUG_SET_SELECT		0x36
 
-#define CMD_GRTC_READ_LO		0x42
-#define CMD_GRTC_READ_HI		0x43
+#define CMD_GFRC_READ_LO		0x42
+#define CMD_GFRC_READ_HI		0x43
 
 #define CMD_IDU_ENABLE			0x71
 #define CMD_IDU_DISABLE			0x72
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 429957f1c236..36da89e2c853 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -10,12 +10,8 @@
 
 #include <uapi/asm/page.h>
 
-
 #ifndef __ASSEMBLY__
 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
@@ -76,30 +72,26 @@ typedef unsigned long pgprot_t;
 
 typedef pte_t * pgtable_t;
 
-#define ARCH_PFN_OFFSET     (CONFIG_LINUX_LINK_BASE >> PAGE_SHIFT)
+#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
 
-#define pfn_valid(pfn)      (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#define ARCH_PFN_OFFSET		virt_to_pfn(CONFIG_LINUX_LINK_BASE)
+
+#define pfn_valid(pfn)		(((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
 
 /*
  * __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
  *
  * These macros have historically been misnamed
  * virt here means link-address/program-address as embedded in object code.
- * So if kernel img is linked at 0x8000_0000 onwards, 0x8010_0000 will be
- * 128th page, and virt_to_page( ) will return the struct page corresp to it.
- * mem_map[ ] is an array of struct page for each page frame in the system
- *
- * Independent of where linux is linked at, link-addr = physical address
- * So the old macro  __pa = vaddr + PAGE_OFFSET - CONFIG_LINUX_LINK_BASE
- * would have been wrong in case kernel is not at 0x8zs
+ * And for ARC, link-addr = physical address
  */
 #define __pa(vaddr)  ((unsigned long)vaddr)
 #define __va(paddr)  ((void *)((unsigned long)(paddr)))
 
 #define virt_to_page(kaddr)	\
-	(mem_map + ((__pa(kaddr) - CONFIG_LINUX_LINK_BASE) >> PAGE_SHIFT))
+	(mem_map + virt_to_pfn((kaddr) - CONFIG_LINUX_LINK_BASE))
 
-#define virt_addr_valid(kaddr)  pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
 /* Default Permissions for stack/heaps pages (Non Executable) */
 #define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE)
diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h
new file mode 100644
index 000000000000..ba56c23c1b20
--- /dev/null
+++ b/arch/arc/include/asm/pci.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_PCI_H
+#define _ASM_ARC_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/ioport.h>
+
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x100000
+
+#define pcibios_assign_all_busses()	1
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_PCI_H */
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 57af2f05ae84..7d6c93e63adf 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -12,7 +12,7 @@
  *  - Utilise some unused free bits to confine PTE flags to 12 bits
  *     This is a must for 4k pg-sz
  *
- * vineetg: Mar 2011 - changes to accomodate MMU TLB Page Descriptor mods
+ * vineetg: Mar 2011 - changes to accommodate MMU TLB Page Descriptor mods
  *  -TLB Locking never really existed, except for initial specs
  *  -SILENT_xxx not needed for our port
  *  -Per my request, MMU V3 changes the layout of some of the bits
@@ -179,37 +179,44 @@
 #define __S111  PAGE_U_X_W_R
 
 /****************************************************************
- * Page Table Lookup split
+ * 2 tier (PGD:PTE) software page walker
  *
- * We implement 2 tier paging and since this is all software, we are free
- * to customize the span of a PGD / PTE entry to suit us
- *
- *			32 bit virtual address
+ * [31]		    32 bit virtual address              [0]
  * -------------------------------------------------------
- * | BITS_FOR_PGD    |  BITS_FOR_PTE    |  BITS_IN_PAGE  |
+ * |               | <------------ PGDIR_SHIFT ----------> |
+ * |		   |					 |
+ * | BITS_FOR_PGD  |  BITS_FOR_PTE  | <-- PAGE_SHIFT --> |
  * -------------------------------------------------------
  *       |                  |                |
  *       |                  |                --> off in page frame
- *       |		    |
  *       |                  ---> index into Page Table
- *       |
  *       ----> index into Page Directory
+ *
+ * In a single page size configuration, only PAGE_SHIFT is fixed
+ * So both PGD and PTE sizing can be tweaked
+ *  e.g. 8K page (PAGE_SHIFT 13) can have
+ *  - PGDIR_SHIFT 21  -> 11:8:13 address split
+ *  - PGDIR_SHIFT 24  -> 8:11:13 address split
+ *
+ * If Super Page is configured, PGDIR_SHIFT becomes fixed too,
+ * so the sizing flexibility is gone.
  */
 
-#define BITS_IN_PAGE	PAGE_SHIFT
-
-/* Optimal Sizing of Pg Tbl - based on MMU page size */
-#if defined(CONFIG_ARC_PAGE_SIZE_8K)
-#define BITS_FOR_PTE	8		/* 11:8:13 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define BITS_FOR_PTE	8		/* 10:8:14 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define BITS_FOR_PTE	9		/* 11:9:12 */
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT	24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT	21
+#else
+/*
+ * Only Normal page support so "hackable" (see comment above)
+ * Default value provides 11:8:13 (8K), 11:9:12 (4K)
+ */
+#define PGDIR_SHIFT	21
 #endif
 
-#define BITS_FOR_PGD	(32 - BITS_FOR_PTE - BITS_IN_PAGE)
+#define BITS_FOR_PTE	(PGDIR_SHIFT - PAGE_SHIFT)
+#define BITS_FOR_PGD	(32 - PGDIR_SHIFT)
 
-#define PGDIR_SHIFT	(32 - BITS_FOR_PGD)
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)	/* vaddr span, not PDG sz */
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
@@ -271,15 +278,14 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 #define pmd_present(x)			(pmd_val(x))
 #define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
 
-#define pte_page(x) (mem_map + \
-		(unsigned long)(((pte_val(x) - CONFIG_LINUX_LINK_BASE) >> \
-				PAGE_SHIFT)))
+#define pte_page(pte)	\
+	(mem_map + virt_to_pfn(pte_val(pte) - CONFIG_LINUX_LINK_BASE))
 
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pte_pfn(pte)		virt_to_pfn(pte_val(pte))
 #define pfn_pte(pfn, prot)	(__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
 				 pgprot_val(prot)))
-#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define __pte_index(addr)	(virt_to_pfn(addr) & (PTRS_PER_PTE - 1))
 
 /*
  * pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system)
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 44545354e9e8..1d694c1ef6d6 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -57,11 +57,7 @@ struct task_struct;
  * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
  * get optimised away by gcc
  */
-#ifdef CONFIG_SMP
 #define cpu_relax()	__asm__ __volatile__ ("" : : : "memory")
-#else
-#define cpu_relax()	do { } while (0)
-#endif
 
 #define cpu_relax_lowlatency() cpu_relax()
 
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index 133c867d15af..991380438d6b 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -48,7 +48,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
  * @init_early_smp:	A SMP specific h/w block can init itself
  * 			Could be common across platforms so not covered by
  * 			mach_desc->init_early()
- * @init_irq_cpu:	Called for each core so SMP h/w block driver can do
+ * @init_per_cpu:	Called for each core so SMP h/w block driver can do
  * 			any needed setup per cpu (e.g. IPI request)
  * @cpu_kick:		For Master to kickstart a cpu (optionally at a PC)
  * @ipi_send:		To send IPI to a @cpu
@@ -57,7 +57,7 @@ extern int smp_ipi_irq_setup(int cpu, int irq);
 struct plat_smp_ops {
 	const char 	*info;
 	void		(*init_early_smp)(void);
-	void		(*init_irq_cpu)(int cpu);
+	void		(*init_per_cpu)(int cpu);
 	void		(*cpu_kick)(int cpu, unsigned long pc);
 	void		(*ipi_send)(int cpu);
 	void		(*ipi_clear)(int irq);
diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h
index 1fe9c8c80280..f0d42f1e83f5 100644
--- a/arch/arc/include/asm/tlbflush.h
+++ b/arch/arc/include/asm/tlbflush.h
@@ -17,8 +17,10 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
 void local_flush_tlb_kernel_range(unsigned long start, unsigned long end);
 void local_flush_tlb_range(struct vm_area_struct *vma,
 			   unsigned long start, unsigned long end);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			       unsigned long end);
+#endif
 
 #ifndef CONFIG_SMP
 #define flush_tlb_range(vma, s, e)	local_flush_tlb_range(vma, s, e)
@@ -26,7 +28,9 @@ void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 #define flush_tlb_kernel_range(s, e)	local_flush_tlb_kernel_range(s, e)
 #define flush_tlb_all()			local_flush_tlb_all()
 #define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define flush_pmd_tlb_range(vma, s, e)	local_flush_pmd_tlb_range(vma, s, e)
+#endif
 #else
 extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 							 unsigned long end);
@@ -34,7 +38,8 @@ extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
 extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
 extern void flush_tlb_all(void);
 extern void flush_tlb_mm(struct mm_struct *mm);
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
-
+#endif
 #endif /* CONFIG_SMP */
 #endif
diff --git a/arch/arc/include/asm/unwind.h b/arch/arc/include/asm/unwind.h
index 7ca628b6ee2a..c11a25bb8158 100644
--- a/arch/arc/include/asm/unwind.h
+++ b/arch/arc/include/asm/unwind.h
@@ -112,7 +112,6 @@ struct unwind_frame_info {
 
 extern int arc_unwind(struct unwind_frame_info *frame);
 extern void arc_unwind_init(void);
-extern void arc_unwind_setup(void);
 extern void *unwind_add_table(struct module *module, const void *table_start,
 			      unsigned long table_size);
 extern void unwind_remove_table(void *handle, int init_only);
@@ -152,9 +151,6 @@ static inline void arc_unwind_init(void)
 {
 }
 
-static inline void arc_unwind_setup(void)
-{
-}
 #define unwind_add_table(a, b, c)
 #define unwind_remove_table(a, b)
 
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index e7f3625a19b5..1bc2036b19d7 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -12,6 +12,7 @@ obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
+obj-$(CONFIG_PCI)  			+= pcibios.o
 
 obj-$(CONFIG_MODULES)			+= arcksyms.o module.o
 obj-$(CONFIG_SMP) 			+= smp.o
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
index c14a5bea0c76..5d446df2c413 100644
--- a/arch/arc/kernel/ctx_sw.c
+++ b/arch/arc/kernel/ctx_sw.c
@@ -58,8 +58,6 @@ __switch_to(struct task_struct *prev_task, struct task_struct *next_task)
 		"st      sp, [r24]       \n\t"
 #endif
 
-		"sync   \n\t"
-
 		/*
 		 * setup _current_task with incoming tsk.
 		 * optionally, set r25 to that as well
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
index e248594097e7..e6890b1f8650 100644
--- a/arch/arc/kernel/ctx_sw_asm.S
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -44,9 +44,6 @@ __switch_to:
 	* don't need to do anything special to return it
 	*/
 
-	/* hardware memory barrier */
-	sync
-
 	/*
 	 * switch to new task, contained in r1
 	 * Temp reg r3 is required to get the ptr to store val
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index 445e63a10754..c1264607bbff 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -45,11 +45,12 @@ VECTOR	reserved		; Reserved slots
 VECTOR	handle_interrupt	; (16) Timer0
 VECTOR	handle_interrupt	; unused (Timer1)
 VECTOR	handle_interrupt	; unused (WDT)
-VECTOR	handle_interrupt	; (19) ICI (inter core interrupt)
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt	; (23) End of fixed IRQs
+VECTOR	handle_interrupt	; (19) Inter core Interrupt (IPI)
+VECTOR	handle_interrupt	; (20) perf Interrupt
+VECTOR	handle_interrupt	; (21) Software Triggered Intr (Self IPI)
+VECTOR	handle_interrupt	; unused
+VECTOR	handle_interrupt	; (23) unused
+# End of fixed IRQs
 
 .rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
 	VECTOR	handle_interrupt
@@ -91,6 +92,25 @@ ENTRY(EV_DCError)
 	flag 1
 END(EV_DCError)
 
+; ---------------------------------------------
+; Memory Error Exception Handler
+;   - Unlike ARCompact, handles Bus errors for both User/Kernel mode,
+;     Instruction fetch or Data access, under a single Exception Vector
+; ---------------------------------------------
+
+ENTRY(mem_service)
+
+	EXCEPTION_PROLOGUE
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN
+
+	bl  do_memory_error
+	b   ret_from_exception
+END(mem_service)
+
 ENTRY(EV_Misaligned)
 
 	EXCEPTION_PROLOGUE
@@ -192,7 +212,11 @@ debug_marker_syscall:
 ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
 ; entry was via Exception in DS which got preempted in kernel).
 ;
-; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
+; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
+;
+; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
+; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
+
 .Lintr_ret_to_delay_slot:
 debug_marker_ds:
 
@@ -203,18 +227,23 @@ debug_marker_ds:
 	ld	r2, [sp, PT_ret]
 	ld	r3, [sp, PT_status32]
 
+	; STAT32 for Int return created from scratch
+	; (No delay dlot, disable Further intr in trampoline)
+
 	bic  	r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
 	st	r0, [sp, PT_status32]
 
 	mov	r1, .Lintr_ret_to_delay_slot_2
 	st	r1, [sp, PT_ret]
 
+	; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
 	st	r2, [sp, 0]
 	st	r3, [sp, 4]
 
 	b	.Lisr_ret_fast_path
 
 .Lintr_ret_to_delay_slot_2:
+	; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
 	sub	sp, sp, SZ_PT_REGS
 	st	r9, [sp, -4]
 
@@ -224,11 +253,19 @@ debug_marker_ds:
 	ld	r9, [sp, 4]
 	sr	r9, [erstatus]
 
+	; restore AUX_USER_SP if returning to U mode
+	bbit0	r9, STATUS_U_BIT, 1f
+	ld	r9, [sp, PT_sp]
+	sr	r9, [AUX_USER_SP]
+
+1:
 	ld	r9, [sp, 8]
 	sr	r9, [erbta]
 
 	ld	r9, [sp, -4]
 	add	sp, sp, SZ_PT_REGS
+
+	; return from pure kernel mode to delay slot
 	rtie
 
 END(ret_from_exception)
diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S
index 59f52035b4ea..431433929189 100644
--- a/arch/arc/kernel/entry-compact.S
+++ b/arch/arc/kernel/entry-compact.S
@@ -142,16 +142,12 @@ int1_saved_reg:
 	.zero 4
 
 /* Each Interrupt level needs its own scratch */
-#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
-
 ARCFP_DATA int2_saved_reg
 	.type   int2_saved_reg, @object
 	.size   int2_saved_reg, 4
 int2_saved_reg:
 	.zero 4
 
-#endif
-
 ; ---------------------------------------------
 	.section .text, "ax",@progbits
 
@@ -216,6 +212,31 @@ END(handle_interrupt_level2)
 #endif
 
 ; ---------------------------------------------
+; User Mode Memory Bus Error Interrupt Handler
+; (Kernel mode memory errors handled via seperate exception vectors)
+; ---------------------------------------------
+ENTRY(mem_service)
+
+	INTERRUPT_PROLOGUE 2
+
+	mov r0, ilink2
+	mov r1, sp
+
+	; User process needs to be killed with SIGBUS, but first need to get
+	; out of the L2 interrupt context (drop to pure kernel mode) and jump
+	; off to "C" code where SIGBUS in enqueued
+	lr  r3, [status32]
+	bclr r3, r3, STATUS_A2_BIT
+	or  r3, r3, (STATUS_E1_MASK|STATUS_E2_MASK)
+	sr  r3, [status32_l2]
+	mov ilink2, 1f
+	rtie
+1:
+	bl  do_memory_error
+	b   ret_from_exception
+END(mem_service)
+
+; ---------------------------------------------
 ;  Level 1 ISR
 ; ---------------------------------------------
 ENTRY(handle_interrupt_level1)
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 589abf5172d6..2efb0625331d 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -93,23 +93,6 @@ ENTRY(instr_service)
 END(instr_service)
 
 ; ---------------------------------------------
-; Memory Error Exception Handler
-; ---------------------------------------------
-
-ENTRY(mem_service)
-
-	EXCEPTION_PROLOGUE
-
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
-	bl  do_memory_error
-	b   ret_from_exception
-END(mem_service)
-
-; ---------------------------------------------
 ; Machine Check Exception Handler
 ; ---------------------------------------------
 
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 26c156827479..942526322ae7 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -14,6 +14,8 @@
 #include <linux/irqchip.h>
 #include <asm/irq.h>
 
+static int irq_prio;
+
 /*
  * Early Hardware specific Interrupt setup
  * -Called very early (start_kernel -> setup_arch -> setup_processor)
@@ -24,6 +26,14 @@ void arc_init_IRQ(void)
 {
 	unsigned int tmp;
 
+	struct irq_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
+#else
+		unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
+#endif
+	} irq_bcr;
+
 	struct aux_irq_ctrl {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int res3:18, save_idx_regs:1, res2:1,
@@ -46,28 +56,25 @@ void arc_init_IRQ(void)
 
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
-	/* setup status32, don't enable intr yet as kernel doesn't want */
-	tmp = read_aux_reg(0xa);
-	tmp |= ISA_INIT_STATUS_BITS;
-	tmp &= ~STATUS_IE_MASK;
-	asm volatile("flag %0	\n"::"r"(tmp));
-
 	/*
 	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
 	 * Typical builds though have only two levels (0-high, 1-low)
 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
 	 * NMI style interrupts in future (say perf)
-	 *
-	 * Read the intc BCR to confirm that Linux default priority is avail
-	 * in h/w
-	 *
-	 * Note:
-	 *  IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
-	 *  is 0 based.
 	 */
-	tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
-	if (ARCV2_IRQ_DEF_PRIO > tmp)
-		panic("Linux default irq prio incorrect\n");
+
+	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
+
+	irq_prio = irq_bcr.prio;	/* Encoded as N-1 for N levels */
+	pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
+		irq_prio + 1, irq_prio,
+		irq_bcr.firq ? " FIRQ (not used)":"");
+
+	/* setup status32, don't enable intr yet as kernel doesn't want */
+	tmp = read_aux_reg(0xa);
+	tmp |= STATUS_AD_MASK | (irq_prio << 1);
+	tmp &= ~STATUS_IE_MASK;
+	asm volatile("flag %0	\n"::"r"(tmp));
 }
 
 static void arcv2_irq_mask(struct irq_data *data)
@@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
 	write_aux_reg(AUX_IRQ_SELECT, data->irq);
-	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
+	write_aux_reg(AUX_IRQ_PRIORITY, irq_prio);
 
 	/*
 	 * hw auto enables (linux unmask) all by default
@@ -106,10 +113,21 @@ static struct irq_chip arcv2_irq_chip = {
 static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
 			 irq_hw_number_t hw)
 {
-	if (irq == TIMER0_IRQ || irq == IPI_IRQ)
+	/*
+	 * core intc IRQs [16, 23]:
+	 * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
+	 */
+	if (hw < 24) {
+		/*
+		 * A subsequent request_percpu_irq() fails if percpu_devid is
+		 * not set. That in turns sets NOAUTOEN, meaning each core needs
+		 * to call enable_percpu_irq()
+		 */
+		irq_set_percpu_devid(irq);
 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
-	else
+	} else {
 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
+	}
 
 	return 0;
 }
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index 06bcedf19b62..224d1c3aa9c4 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -81,9 +81,6 @@ static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
 {
 	switch (irq) {
 	case TIMER0_IRQ:
-#ifdef CONFIG_SMP
-	case IPI_IRQ:
-#endif
 		irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
 		break;
 	default:
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index 2ee226546c6a..ba17f85285cf 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -29,11 +29,11 @@ void __init init_IRQ(void)
 
 #ifdef CONFIG_SMP
 	/* a SMP H/w block could do IPI IRQ request here */
-	if (plat_smp_ops.init_irq_cpu)
-		plat_smp_ops.init_irq_cpu(smp_processor_id());
+	if (plat_smp_ops.init_per_cpu)
+		plat_smp_ops.init_per_cpu(smp_processor_id());
 
-	if (machine_desc->init_cpu_smp)
-		machine_desc->init_cpu_smp(smp_processor_id());
+	if (machine_desc->init_per_cpu)
+		machine_desc->init_per_cpu(smp_processor_id());
 #endif
 }
 
@@ -51,6 +51,18 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	set_irq_regs(old_regs);
 }
 
+/*
+ * API called for requesting percpu interrupts - called by each CPU
+ *  - For boot CPU, actually request the IRQ with genirq core + enables
+ *  - For subsequent callers only enable called locally
+ *
+ * Relies on being called by boot cpu first (i.e. request called ahead) of
+ * any enable as expected by genirq. Hence Suitable only for TIMER, IPI
+ * which are guaranteed to be setup on boot core first.
+ * Late probed peripherals such as perf can't use this as there no guarantee
+ * of being called on boot CPU first.
+ */
+
 void arc_request_percpu_irq(int irq, int cpu,
                             irqreturn_t (*isr)(int irq, void *dev),
                             const char *irq_nm,
@@ -60,14 +72,17 @@ void arc_request_percpu_irq(int irq, int cpu,
 	if (!cpu) {
 		int rc;
 
+#ifdef CONFIG_ISA_ARCOMPACT
 		/*
-		 * These 2 calls are essential to making percpu IRQ APIs work
-		 * Ideally these details could be hidden in irq chip map function
-		 * but the issue is IPIs IRQs being static (non-DT) and platform
-		 * specific, so we can't identify them there.
+		 * A subsequent request_percpu_irq() fails if percpu_devid is
+		 * not set. That in turns sets NOAUTOEN, meaning each core needs
+		 * to call enable_percpu_irq()
+		 *
+		 * For ARCv2, this is done in irq map function since we know
+		 * which irqs are strictly per cpu
 		 */
 		irq_set_percpu_devid(irq);
-		irq_modify_status(irq, IRQ_NOAUTOEN, 0);  /* @irq, @clr, @set */
+#endif
 
 		rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev);
 		if (rc)
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 74a9b074ac3e..c41c364b926c 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -11,9 +11,13 @@
 #include <linux/smp.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
+#include <asm/irqflags-arcv2.h>
 #include <asm/mcip.h>
 #include <asm/setup.h>
 
+#define IPI_IRQ		19
+#define SOFTIRQ_IRQ	21
+
 static char smp_cpuinfo_buf[128];
 static int idu_detected;
 
@@ -22,6 +26,7 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 static void mcip_setup_per_cpu(int cpu)
 {
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
+	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -29,46 +34,44 @@ static void mcip_ipi_send(int cpu)
 	unsigned long flags;
 	int ipi_was_pending;
 
+	/* ARConnect can only send IPI to others */
+	if (unlikely(cpu == raw_smp_processor_id())) {
+		arc_softirq_trigger(SOFTIRQ_IRQ);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
 	/*
-	 * NOTE: We must spin here if the other cpu hasn't yet
-	 * serviced a previous message. This can burn lots
-	 * of time, but we MUST follows this protocol or
-	 * ipi messages can be lost!!!
-	 * Also, we must release the lock in this loop because
-	 * the other side may get to this same loop and not
-	 * be able to ack -- thus causing deadlock.
+	 * If receiver already has a pending interrupt, elide sending this one.
+	 * Linux cross core calling works well with concurrent IPIs
+	 * coalesced into one
+	 * see arch/arc/kernel/smp.c: ipi_send_msg_one()
 	 */
+	__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
+	ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
+	if (!ipi_was_pending)
+		__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
 
-	do {
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
-		ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
-		if (ipi_was_pending == 0)
-			break; /* break out but keep lock */
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	} while (1);
-
-	__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
-
-#ifdef CONFIG_ARC_IPI_DBG
-	if (ipi_was_pending)
-		pr_info("IPI ACK delayed from cpu %d\n", cpu);
-#endif
 }
 
 static void mcip_ipi_clear(int irq)
 {
 	unsigned int cpu, c;
 	unsigned long flags;
-	unsigned int __maybe_unused copy;
+
+	if (unlikely(irq == SOFTIRQ_IRQ)) {
+		arc_softirq_clear(irq);
+		return;
+	}
 
 	raw_spin_lock_irqsave(&mcip_lock, flags);
 
 	/* Who sent the IPI */
 	__mcip_cmd(CMD_INTRPT_CHECK_SOURCE, 0);
 
-	copy = cpu = read_aux_reg(ARC_REG_MCIP_READBACK);	/* 1,2,4,8... */
+	cpu = read_aux_reg(ARC_REG_MCIP_READBACK);	/* 1,2,4,8... */
 
 	/*
 	 * In rare case, multiple concurrent IPIs sent to same target can
@@ -82,12 +85,6 @@ static void mcip_ipi_clear(int irq)
 	} while (cpu);
 
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
-
-#ifdef CONFIG_ARC_IPI_DBG
-	if (c != __ffs(copy))
-		pr_info("IPIs from %x coalesced to %x\n",
-			copy, raw_smp_processor_id());
-#endif
 }
 
 static void mcip_probe_n_setup(void)
@@ -96,13 +93,13 @@ static void mcip_probe_n_setup(void)
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int pad3:8,
 			     idu:1, llm:1, num_cores:6,
-			     iocoh:1,  grtc:1, dbg:1, pad2:1,
+			     iocoh:1,  gfrc:1, dbg:1, pad2:1,
 			     msg:1, sem:1, ipi:1, pad:1,
 			     ver:8;
 #else
 		unsigned int ver:8,
 			     pad:1, ipi:1, sem:1, msg:1,
-			     pad2:1, dbg:1, grtc:1, iocoh:1,
+			     pad2:1, dbg:1, gfrc:1, iocoh:1,
 			     num_cores:6, llm:1, idu:1,
 			     pad3:8;
 #endif
@@ -111,12 +108,13 @@ static void mcip_probe_n_setup(void)
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
 	sprintf(smp_cpuinfo_buf,
-		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
+		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
 		mp.ver, mp.num_cores,
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
+		IS_AVAIL1(mp.llm, "LLM "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
-		IS_AVAIL1(mp.grtc, "GRTC"));
+		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	idu_detected = mp.idu;
 
@@ -125,14 +123,14 @@ static void mcip_probe_n_setup(void)
 		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
 	}
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc)
-		panic("kernel trying to use non-existent GRTC\n");
+	if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
+		panic("kernel trying to use non-existent GFRC\n");
 }
 
 struct plat_smp_ops plat_smp_ops = {
 	.info		= smp_cpuinfo_buf,
 	.init_early_smp	= mcip_probe_n_setup,
-	.init_irq_cpu	= mcip_setup_per_cpu,
+	.init_per_cpu	= mcip_setup_per_cpu,
 	.ipi_send	= mcip_ipi_send,
 	.ipi_clear	= mcip_ipi_clear,
 };
diff --git a/arch/arc/kernel/pcibios.c b/arch/arc/kernel/pcibios.c
new file mode 100644
index 000000000000..72e1d73d0bd6
--- /dev/null
+++ b/arch/arc/kernel/pcibios.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+
+/*
+ * We don't have to worry about legacy ISA devices, so nothing to do here
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	return res->start;
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+}
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 0c08bb1ce15a..8b134cfe5e1f 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -428,12 +428,11 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 #endif /* CONFIG_ISA_ARCV2 */
 
-void arc_cpu_pmu_irq_init(void)
+static void arc_cpu_pmu_irq_init(void *data)
 {
-	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+	int irq = *(int *)data;
 
-	arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr,
-			       "ARC perf counters", pmu_cpu);
+	enable_percpu_irq(irq, IRQ_TYPE_NONE);
 
 	/* Clear all pending interrupt flags */
 	write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
@@ -515,7 +514,6 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 
 	if (has_interrupts) {
 		int irq = platform_get_irq(pdev, 0);
-		unsigned long flags;
 
 		if (irq < 0) {
 			pr_err("Cannot get IRQ number for the platform\n");
@@ -524,24 +522,12 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 
 		arc_pmu->irq = irq;
 
-		/*
-		 * arc_cpu_pmu_irq_init() needs to be called on all cores for
-		 * their respective local PMU.
-		 * However we use opencoded on_each_cpu() to ensure it is called
-		 * on core0 first, so that arc_request_percpu_irq() sets up
-		 * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable
-		 * perf IRQ on non master cores.
-		 * see arc_request_percpu_irq()
-		 */
-		preempt_disable();
-		local_irq_save(flags);
-		arc_cpu_pmu_irq_init();
-		local_irq_restore(flags);
-		smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1);
-		preempt_enable();
-
-		/* Clean all pending interrupt flags */
-		write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
+		/* intc map function ensures irq_set_percpu_devid() called */
+		request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+				   this_cpu_ptr(&arc_pmu_cpu));
+
+		on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+
 	} else
 		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
 
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 91d5a0f1f3f7..a3f750e76b68 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -44,11 +44,10 @@ SYSCALL_DEFINE0(arc_gettls)
 void arch_cpu_idle(void)
 {
 	/* sleep, but enable all interrupts before committing */
-	if (is_isa_arcompact()) {
-		__asm__("sleep 0x3");
-	} else {
-		__asm__("sleep 0x10");
-	}
+	__asm__ __volatile__(
+		"sleep %0	\n"
+		:
+		:"I"(ISA_SLEEP_ARG)); /* can't be "r" has to be embedded const */
 }
 
 asmlinkage void ret_from_fork(void);
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index c33e77c0ad3e..151acf0c9383 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -42,27 +42,69 @@ struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
+static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
+{
+	if (is_isa_arcompact()) {
+		struct bcr_iccm_arcompact iccm;
+		struct bcr_dccm_arcompact dccm;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
+			cpu->iccm.base_addr = iccm.base << 16;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			unsigned long base;
+			cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
+
+			base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
+			cpu->dccm.base_addr = base & ~0xF;
+		}
+	} else {
+		struct bcr_iccm_arcv2 iccm;
+		struct bcr_dccm_arcv2 dccm;
+		unsigned long region;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
+			if (iccm.sz00 == 0xF && iccm.sz01 > 0)
+				cpu->iccm.sz <<= iccm.sz01;
+
+			region = read_aux_reg(ARC_REG_AUX_ICCM);
+			cpu->iccm.base_addr = region & 0xF0000000;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			cpu->dccm.sz = 256 << dccm.sz0;
+			if (dccm.sz0 == 0xF && dccm.sz1 > 0)
+				cpu->dccm.sz <<= dccm.sz1;
+
+			region = read_aux_reg(ARC_REG_AUX_DCCM);
+			cpu->dccm.base_addr = region & 0xF0000000;
+		}
+	}
+}
+
 static void read_arc_build_cfg_regs(void)
 {
-	struct bcr_perip uncached_space;
+	struct bcr_timer timer;
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
-	unsigned long perip_space;
 	FIX_PTR(cpu);
 
 	READ_BCR(AUX_IDENTITY, cpu->core);
 	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
 
-	READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers);
-	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
-
-	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
-        if (uncached_space.ver < 3)
-		perip_space = uncached_space.start << 24;
-	else
-		perip_space = read_aux_reg(AUX_NON_VOL) & 0xF0000000;
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	cpu->extn.timer0 = timer.t0;
+	cpu->extn.timer1 = timer.t1;
+	cpu->extn.rtc = timer.rtc;
 
-	BUG_ON(perip_space != ARC_UNCACHED_ADDR_SPACE);
+	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
 
 	READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
 
@@ -71,36 +113,11 @@ static void read_arc_build_cfg_regs(void)
 	cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0;        /* 1,3 */
 	cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
 	cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
-
-	/* Note that we read the CCM BCRs independent of kernel config
-	 * This is to catch the cases where user doesn't know that
-	 * CCMs are present in hardware build
-	 */
-	{
-		struct bcr_iccm iccm;
-		struct bcr_dccm dccm;
-		struct bcr_dccm_base dccm_base;
-		unsigned int bcr_32bit_val;
-
-		bcr_32bit_val = read_aux_reg(ARC_REG_ICCM_BCR);
-		if (bcr_32bit_val) {
-			iccm = *((struct bcr_iccm *)&bcr_32bit_val);
-			cpu->iccm.base_addr = iccm.base << 16;
-			cpu->iccm.sz = 0x2000 << (iccm.sz - 1);
-		}
-
-		bcr_32bit_val = read_aux_reg(ARC_REG_DCCM_BCR);
-		if (bcr_32bit_val) {
-			dccm = *((struct bcr_dccm *)&bcr_32bit_val);
-			cpu->dccm.sz = 0x800 << (dccm.sz);
-
-			READ_BCR(ARC_REG_DCCMBASE_BCR, dccm_base);
-			cpu->dccm.base_addr = dccm_base.addr << 8;
-		}
-	}
-
 	READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
 
+	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
+	read_decode_ccm_bcr(cpu);
+
 	read_decode_mmu_bcr();
 	read_decode_cache_bcr();
 
@@ -208,9 +225,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       (unsigned int)(arc_get_core_freq() / 10000) % 100);
 
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
-		       IS_AVAIL1(cpu->timers.t0, "Timer0 "),
-		       IS_AVAIL1(cpu->timers.t1, "Timer1 "),
-		       IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ",
+		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
+		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
+		       IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ",
 				 CONFIG_ARC_HAS_RTC));
 
 	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
@@ -232,8 +249,6 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 
 			n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
 		}
-		n += scnprintf(buf + n, len - n, "%s",
-			       IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
 	}
 
 	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
@@ -263,8 +278,8 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 	FIX_PTR(cpu);
 
 	n += scnprintf(buf + n, len - n,
-		       "Vector Table\t: %#x\nUncached Base\t: %#x\n",
-		       cpu->vec_base, ARC_UNCACHED_ADDR_SPACE);
+		       "Vector Table\t: %#x\nUncached Base\t: %#lx\n",
+		       cpu->vec_base, perip_base);
 
 	if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
 		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
@@ -293,13 +308,13 @@ static void arc_chk_core_config(void)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	int fpu_enabled;
 
-	if (!cpu->timers.t0)
+	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");
 
-	if (!cpu->timers.t1)
+	if (!cpu->extn.timer1)
 		panic("Timer1 is not present!\n");
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc)
+	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
 		panic("RTC is not present\n");
 
 #ifdef CONFIG_ARC_HAS_DCCM
@@ -332,10 +347,6 @@ static void arc_chk_core_config(void)
 		pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n");
 	else if (!cpu->extn.fpu_dp && fpu_enabled)
 		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
-
-	if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
-	    !IS_ENABLED(CONFIG_ARC_STAR_9000923308))
-		panic("llock/scond livelock workaround missing\n");
 }
 
 /*
@@ -429,7 +440,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	arc_unwind_init();
-	arc_unwind_setup();
 }
 
 static int __init customize_machine(void)
@@ -439,7 +449,7 @@ static int __init customize_machine(void)
 	 * Traverses flattened DeviceTree - registering platform devices
 	 * (if any) complete with their resources
 	 */
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_default_populate(NULL, NULL, NULL);
 
 	if (machine_desc->init_machine)
 		machine_desc->init_machine();
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 580587805fa3..4cb3add77c75 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -132,17 +132,17 @@ void start_kernel_secondary(void)
 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	/* Some SMP H/w setup - for each cpu */
-	if (plat_smp_ops.init_irq_cpu)
-		plat_smp_ops.init_irq_cpu(cpu);
+	if (plat_smp_ops.init_per_cpu)
+		plat_smp_ops.init_per_cpu(cpu);
 
-	if (machine_desc->init_cpu_smp)
-		machine_desc->init_cpu_smp(cpu);
+	if (machine_desc->init_per_cpu)
+		machine_desc->init_per_cpu(cpu);
 
 	arc_local_timer_setup();
 
 	local_irq_enable();
 	preempt_disable();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 /*
@@ -336,11 +336,8 @@ irqreturn_t do_IPI(int irq, void *dev_id)
 		int rc;
 
 		rc = __do_IPI(msg);
-#ifdef CONFIG_ARC_IPI_DBG
-		/* IPI received but no valid @msg */
 		if (rc)
 			pr_info("IPI with bogus msg %ld in %ld\n", msg, copy);
-#endif
 		pending &= ~(1U << msg);
 	} while (pending);
 
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index 001de4ce711e..e0efff15a5ae 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -232,7 +232,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp)
 }
 
 /* Another API expected by schedular, shows up in "ps" as Wait Channel
- * Ofcourse just returning schedule( ) would be pointless so unwind until
+ * Of course just returning schedule( ) would be pointless so unwind until
  * the function is not in schedular code
  */
 unsigned int get_wchan(struct task_struct *tsk)
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index dfad287f1db1..7d9a736fc7e5 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -55,14 +55,14 @@
 #define ARC_REG_TIMER1_CTRL	0x101	/* timer 1 control */
 #define ARC_REG_TIMER1_CNT	0x100	/* timer 1 count */
 
-#define TIMER_CTRL_IE		(1 << 0) /* Interupt when Count reachs limit */
-#define TIMER_CTRL_NH		(1 << 1) /* Count only when CPU NOT halted */
+#define TIMER_CTRL_IE	(1 << 0) /* Interrupt when Count reaches limit */
+#define TIMER_CTRL_NH	(1 << 1) /* Count only when CPU NOT halted */
 
 #define ARC_TIMER_MAX	0xFFFFFFFF
 
 /********** Clock Source Device *********/
 
-#ifdef CONFIG_ARC_HAS_GRTC
+#ifdef CONFIG_ARC_HAS_GFRC
 
 static int arc_counter_setup(void)
 {
@@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 
 	local_irq_save(flags);
 
-	__mcip_cmd(CMD_GRTC_READ_LO, 0);
+	__mcip_cmd(CMD_GFRC_READ_LO, 0);
 	stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
 
-	__mcip_cmd(CMD_GRTC_READ_HI, 0);
+	__mcip_cmd(CMD_GFRC_READ_HI, 0);
 	stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
 
 	local_irq_restore(flags);
@@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 }
 
 static struct clocksource arc_counter = {
-	.name   = "ARConnect GRTC",
+	.name   = "ARConnect GFRC",
 	.rating = 400,
 	.read   = arc_counter_read,
 	.mask   = CLOCKSOURCE_MASK(64),
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index 93c6ea52b671..0587bf121d11 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -170,6 +170,23 @@ static struct unwind_table *find_table(unsigned long pc)
 
 static unsigned long read_pointer(const u8 **pLoc,
 				  const void *end, signed ptrType);
+static void init_unwind_hdr(struct unwind_table *table,
+			    void *(*alloc) (unsigned long));
+
+/*
+ * wrappers for header alloc (vs. calling one vs. other at call site)
+ * to elide section mismatches warnings
+ */
+static void *__init unw_hdr_alloc_early(unsigned long sz)
+{
+	return __alloc_bootmem_nopanic(sz, sizeof(unsigned int),
+				       MAX_DMA_ADDRESS);
+}
+
+static void *unw_hdr_alloc(unsigned long sz)
+{
+	return kmalloc(sz, GFP_KERNEL);
+}
 
 static void init_unwind_table(struct unwind_table *table, const char *name,
 			      const void *core_start, unsigned long core_size,
@@ -209,6 +226,8 @@ void __init arc_unwind_init(void)
 			  __start_unwind, __end_unwind - __start_unwind,
 			  NULL, 0);
 	  /*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/
+
+	init_unwind_hdr(&root_table, unw_hdr_alloc_early);
 }
 
 static const u32 bad_cie, not_fde;
@@ -241,8 +260,8 @@ static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
 	e2->fde = v;
 }
 
-static void __init setup_unwind_table(struct unwind_table *table,
-				      void *(*alloc) (unsigned long))
+static void init_unwind_hdr(struct unwind_table *table,
+			    void *(*alloc) (unsigned long))
 {
 	const u8 *ptr;
 	unsigned long tableSize = table->size, hdrSize;
@@ -277,10 +296,10 @@ static void __init setup_unwind_table(struct unwind_table *table,
 		if (cie == &not_fde)
 			continue;
 		if (cie == NULL || cie == &bad_cie)
-			return;
+			goto ret_err;
 		ptrType = fde_pointer_type(cie);
 		if (ptrType < 0)
-			return;
+			goto ret_err;
 
 		ptr = (const u8 *)(fde + 2);
 		if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde,
@@ -296,13 +315,15 @@ static void __init setup_unwind_table(struct unwind_table *table,
 	}
 
 	if (tableSize || !n)
-		return;
+		goto ret_err;
 
 	hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int)
 	    + 2 * n * sizeof(unsigned long);
+
 	header = alloc(hdrSize);
 	if (!header)
-		return;
+		goto ret_err;
+
 	header->version = 1;
 	header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native;
 	header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4;
@@ -340,18 +361,10 @@ static void __init setup_unwind_table(struct unwind_table *table,
 	table->hdrsz = hdrSize;
 	smp_wmb();
 	table->header = (const void *)header;
-}
-
-static void *__init balloc(unsigned long sz)
-{
-	return __alloc_bootmem_nopanic(sz,
-				       sizeof(unsigned int),
-				       __pa(MAX_DMA_ADDRESS));
-}
+	return;
 
-void __init arc_unwind_setup(void)
-{
-	setup_unwind_table(&root_table, balloc);
+ret_err:
+	panic("Attention !!! Dwarf FDE parsing errors\n");;
 }
 
 #ifdef CONFIG_MODULES
@@ -372,11 +385,13 @@ void *unwind_add_table(struct module *module, const void *table_start,
 		return NULL;
 
 	init_unwind_table(table, module->name,
-			  module->module_core, module->core_size,
-			  module->module_init, module->init_size,
+			  module->core_layout.base, module->core_layout.size,
+			  module->init_layout.base, module->init_layout.size,
 			  table_start, table_size,
 			  NULL, 0);
 
+	init_unwind_hdr(table, unw_hdr_alloc);
+
 #ifdef UNWIND_DEBUG
 	unw_debug("Table added for [%s] %lx %lx\n",
 		module->name, table->core.pc, table->core.range);
@@ -439,6 +454,7 @@ void unwind_remove_table(void *handle, int init_only)
 	info.init_only = init_only;
 
 	unlink_table(&info); /* XXX: SMP */
+	kfree(table->header);
 	kfree(table);
 }
 
@@ -588,9 +604,6 @@ static signed fde_pointer_type(const u32 *cie)
 	const u8 *ptr = (const u8 *)(cie + 2);
 	unsigned version = *ptr;
 
-	if (version != 1)
-		return -1;	/* unsupported */
-
 	if (*++ptr) {
 		const char *aug;
 		const u8 *end = (const u8 *)(cie + 1) + *cie;
@@ -986,42 +999,13 @@ int arc_unwind(struct unwind_frame_info *frame)
 							    (const u8 *)(fde +
 									 1) +
 							    *fde, ptrType);
-				if (pc >= endLoc)
+				if (pc >= endLoc) {
 					fde = NULL;
-			} else
-				fde = NULL;
-		}
-		if (fde == NULL) {
-			for (fde = table->address, tableSize = table->size;
-			     cie = NULL, tableSize > sizeof(*fde)
-			     && tableSize - sizeof(*fde) >= *fde;
-			     tableSize -= sizeof(*fde) + *fde,
-			     fde += 1 + *fde / sizeof(*fde)) {
-				cie = cie_for_fde(fde, table);
-				if (cie == &bad_cie) {
 					cie = NULL;
-					break;
 				}
-				if (cie == NULL
-				    || cie == &not_fde
-				    || (ptrType = fde_pointer_type(cie)) < 0)
-					continue;
-				ptr = (const u8 *)(fde + 2);
-				startLoc = read_pointer(&ptr,
-							(const u8 *)(fde + 1) +
-							*fde, ptrType);
-				if (!startLoc)
-					continue;
-				if (!(ptrType & DW_EH_PE_indirect))
-					ptrType &=
-					    DW_EH_PE_FORM | DW_EH_PE_signed;
-				endLoc =
-				    startLoc + read_pointer(&ptr,
-							    (const u8 *)(fde +
-									 1) +
-							    *fde, ptrType);
-				if (pc >= startLoc && pc < endLoc)
-					break;
+			} else {
+				fde = NULL;
+				cie = NULL;
 			}
 		}
 	}
@@ -1031,9 +1015,7 @@ int arc_unwind(struct unwind_frame_info *frame)
 		ptr = (const u8 *)(cie + 2);
 		end = (const u8 *)(cie + 1) + *cie;
 		frame->call_frame = 1;
-		if ((state.version = *ptr) != 1)
-			cie = NULL;	/* unsupported version */
-		else if (*++ptr) {
+		if (*++ptr) {
 			/* check if augmentation size is first (thus present) */
 			if (*ptr == 'z') {
 				while (++ptr < end && *ptr) {
diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S
index 0cab0b8a57c5..f96c75edf30a 100644
--- a/arch/arc/lib/memcpy-archs.S
+++ b/arch/arc/lib/memcpy-archs.S
@@ -50,26 +50,26 @@ ENTRY(memcpy)
 
 ;;; if size <= 8
 	cmp	r2, 8
-	bls.d	@smallchunk
+	bls.d	@.Lsmallchunk
 	mov.f	lp_count, r2
 
 	and.f	r4, r0, 0x03
 	rsub	lp_count, r4, 4
-	lpnz	@aligndestination
+	lpnz	@.Laligndestination
 	;; LOOP BEGIN
 	ldb.ab	r5, [r1,1]
 	sub	r2, r2, 1
 	stb.ab	r5, [r3,1]
-aligndestination:
+.Laligndestination:
 
 ;;; Check the alignment of the source
 	and.f	r4, r1, 0x03
-	bnz.d	@sourceunaligned
+	bnz.d	@.Lsourceunaligned
 
 ;;; CASE 0: Both source and destination are 32bit aligned
 ;;; Convert len to Dwords, unfold x4
 	lsr.f	lp_count, r2, ZOLSHFT
-	lpnz	@copy32_64bytes
+	lpnz	@.Lcopy32_64bytes
 	;; LOOP START
 	LOADX (r6, r1)
 	PREFETCH_READ (r1)
@@ -81,25 +81,25 @@ aligndestination:
 	STOREX (r8, r3)
 	STOREX (r10, r3)
 	STOREX (r4, r3)
-copy32_64bytes:
+.Lcopy32_64bytes:
 
 	and.f	lp_count, r2, ZOLAND ;Last remaining 31 bytes
-smallchunk:
-	lpnz	@copyremainingbytes
+.Lsmallchunk:
+	lpnz	@.Lcopyremainingbytes
 	;; LOOP START
 	ldb.ab	r5, [r1,1]
 	stb.ab	r5, [r3,1]
-copyremainingbytes:
+.Lcopyremainingbytes:
 
 	j	[blink]
 ;;; END CASE 0
 
-sourceunaligned:
+.Lsourceunaligned:
 	cmp	r4, 2
-	beq.d	@unalignedOffby2
+	beq.d	@.LunalignedOffby2
 	sub	r2, r2, 1
 
-	bhi.d	@unalignedOffby3
+	bhi.d	@.LunalignedOffby3
 	ldb.ab	r5, [r1, 1]
 
 ;;; CASE 1: The source is unaligned, off by 1
@@ -114,7 +114,7 @@ sourceunaligned:
 	or	r5, r5, r6
 
 	;; Both src and dst are aligned
-	lpnz	@copy8bytes_1
+	lpnz	@.Lcopy8bytes_1
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
 	prefetch [r1, 28]	;Prefetch the next read location
@@ -131,7 +131,7 @@ sourceunaligned:
 
 	st.ab	r7, [r3, 4]
 	st.ab	r9, [r3, 4]
-copy8bytes_1:
+.Lcopy8bytes_1:
 
 	;; Write back the remaining 16bits
 	EXTRACT_1 (r6, r5, 16)
@@ -141,14 +141,14 @@ copy8bytes_1:
 	stb.ab	r5, [r3, 1]
 
 	and.f	lp_count, r2, 0x07 ;Last 8bytes
-	lpnz	@copybytewise_1
+	lpnz	@.Lcopybytewise_1
 	;; LOOP START
 	ldb.ab	r6, [r1,1]
 	stb.ab	r6, [r3,1]
-copybytewise_1:
+.Lcopybytewise_1:
 	j	[blink]
 
-unalignedOffby2:
+.LunalignedOffby2:
 ;;; CASE 2: The source is unaligned, off by 2
 	ldh.ab	r5, [r1, 2]
 	sub	r2, r2, 1
@@ -159,7 +159,7 @@ unalignedOffby2:
 #ifdef __BIG_ENDIAN__
 	asl.nz	r5, r5, 16
 #endif
-	lpnz	@copy8bytes_2
+	lpnz	@.Lcopy8bytes_2
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
 	prefetch [r1, 28]	;Prefetch the next read location
@@ -176,7 +176,7 @@ unalignedOffby2:
 
 	st.ab	r7, [r3, 4]
 	st.ab	r9, [r3, 4]
-copy8bytes_2:
+.Lcopy8bytes_2:
 
 #ifdef __BIG_ENDIAN__
 	lsr.nz	r5, r5, 16
@@ -184,14 +184,14 @@ copy8bytes_2:
 	sth.ab	r5, [r3, 2]
 
 	and.f	lp_count, r2, 0x07 ;Last 8bytes
-	lpnz	@copybytewise_2
+	lpnz	@.Lcopybytewise_2
 	;; LOOP START
 	ldb.ab	r6, [r1,1]
 	stb.ab	r6, [r3,1]
-copybytewise_2:
+.Lcopybytewise_2:
 	j	[blink]
 
-unalignedOffby3:
+.LunalignedOffby3:
 ;;; CASE 3: The source is unaligned, off by 3
 ;;; Hence, I need to read 1byte for achieve the 32bit alignment
 
@@ -201,7 +201,7 @@ unalignedOffby3:
 #ifdef __BIG_ENDIAN__
 	asl.ne	r5, r5, 24
 #endif
-	lpnz	@copy8bytes_3
+	lpnz	@.Lcopy8bytes_3
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
 	prefetch [r1, 28]	;Prefetch the next read location
@@ -218,7 +218,7 @@ unalignedOffby3:
 
 	st.ab	r7, [r3, 4]
 	st.ab	r9, [r3, 4]
-copy8bytes_3:
+.Lcopy8bytes_3:
 
 #ifdef __BIG_ENDIAN__
 	lsr.nz	r5, r5, 24
@@ -226,11 +226,11 @@ copy8bytes_3:
 	stb.ab	r5, [r3, 1]
 
 	and.f	lp_count, r2, 0x07 ;Last 8bytes
-	lpnz	@copybytewise_3
+	lpnz	@.Lcopybytewise_3
 	;; LOOP START
 	ldb.ab	r6, [r1,1]
 	stb.ab	r6, [r3,1]
-copybytewise_3:
+.Lcopybytewise_3:
 	j	[blink]
 
 END(memcpy)
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index ff7ff6cbb811..9e5eddbb856f 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -24,13 +24,14 @@
 static int l2_line_sz;
 int ioc_exists;
 volatile int slc_enable = 1, ioc_enable = 1;
+unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 
 void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
 			       unsigned long sz, const int cacheop);
 
-void (*__dma_cache_wback_inv)(unsigned long start, unsigned long sz);
-void (*__dma_cache_inv)(unsigned long start, unsigned long sz);
-void (*__dma_cache_wback)(unsigned long start, unsigned long sz);
+void (*__dma_cache_wback_inv)(phys_addr_t start, unsigned long sz);
+void (*__dma_cache_inv)(phys_addr_t start, unsigned long sz);
+void (*__dma_cache_wback)(phys_addr_t start, unsigned long sz);
 
 char *arc_cache_mumbojumbo(int c, char *buf, int len)
 {
@@ -75,6 +76,7 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
 static void read_decode_cache_bcr_arcv2(int cpu)
 {
 	struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
+	struct bcr_generic uncached_space;
 	struct bcr_generic sbcr;
 
 	struct bcr_slc_cfg {
@@ -104,6 +106,11 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 	READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
 	if (cbcr.c && ioc_enable)
 		ioc_exists = 1;
+
+	/* Legacy Data Uncached BCR is deprecated from v3 onwards */
+	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
+	if (uncached_space.ver > 2)
+		perip_base = read_aux_reg(AUX_NON_VOL) & 0xF0000000;
 }
 
 void read_decode_cache_bcr(void)
@@ -617,11 +624,11 @@ void flush_dcache_page(struct page *page)
 	 */
 	if (!mapping_mapped(mapping)) {
 		clear_bit(PG_dc_clean, &page->flags);
-	} else if (page_mapped(page)) {
+	} else if (page_mapcount(page)) {
 
 		/* kernel reading from page with U-mapping */
 		phys_addr_t paddr = (unsigned long)page_address(page);
-		unsigned long vaddr = page->index << PAGE_CACHE_SHIFT;
+		unsigned long vaddr = page->index << PAGE_SHIFT;
 
 		if (addr_not_cache_congruent(paddr, vaddr))
 			__flush_dcache_page(paddr, vaddr);
@@ -633,38 +640,38 @@ EXPORT_SYMBOL(flush_dcache_page);
  * DMA ops for systems with L1 cache only
  * Make memory coherent with L1 cache by flushing/invalidating L1 lines
  */
-static void __dma_cache_wback_inv_l1(unsigned long start, unsigned long sz)
+static void __dma_cache_wback_inv_l1(phys_addr_t start, unsigned long sz)
 {
 	__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
 }
 
-static void __dma_cache_inv_l1(unsigned long start, unsigned long sz)
+static void __dma_cache_inv_l1(phys_addr_t start, unsigned long sz)
 {
 	__dc_line_op_k(start, sz, OP_INV);
 }
 
-static void __dma_cache_wback_l1(unsigned long start, unsigned long sz)
+static void __dma_cache_wback_l1(phys_addr_t start, unsigned long sz)
 {
 	__dc_line_op_k(start, sz, OP_FLUSH);
 }
 
 /*
  * DMA ops for systems with both L1 and L2 caches, but without IOC
- * Both L1 and L2 lines need to be explicity flushed/invalidated
+ * Both L1 and L2 lines need to be explicitly flushed/invalidated
  */
-static void __dma_cache_wback_inv_slc(unsigned long start, unsigned long sz)
+static void __dma_cache_wback_inv_slc(phys_addr_t start, unsigned long sz)
 {
 	__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
 	slc_op(start, sz, OP_FLUSH_N_INV);
 }
 
-static void __dma_cache_inv_slc(unsigned long start, unsigned long sz)
+static void __dma_cache_inv_slc(phys_addr_t start, unsigned long sz)
 {
 	__dc_line_op_k(start, sz, OP_INV);
 	slc_op(start, sz, OP_INV);
 }
 
-static void __dma_cache_wback_slc(unsigned long start, unsigned long sz)
+static void __dma_cache_wback_slc(phys_addr_t start, unsigned long sz)
 {
 	__dc_line_op_k(start, sz, OP_FLUSH);
 	slc_op(start, sz, OP_FLUSH);
@@ -675,26 +682,26 @@ static void __dma_cache_wback_slc(unsigned long start, unsigned long sz)
  * IOC hardware snoops all DMA traffic keeping the caches consistent with
  * memory - eliding need for any explicit cache maintenance of DMA buffers
  */
-static void __dma_cache_wback_inv_ioc(unsigned long start, unsigned long sz) {}
-static void __dma_cache_inv_ioc(unsigned long start, unsigned long sz) {}
-static void __dma_cache_wback_ioc(unsigned long start, unsigned long sz) {}
+static void __dma_cache_wback_inv_ioc(phys_addr_t start, unsigned long sz) {}
+static void __dma_cache_inv_ioc(phys_addr_t start, unsigned long sz) {}
+static void __dma_cache_wback_ioc(phys_addr_t start, unsigned long sz) {}
 
 /*
  * Exported DMA API
  */
-void dma_cache_wback_inv(unsigned long start, unsigned long sz)
+void dma_cache_wback_inv(phys_addr_t start, unsigned long sz)
 {
 	__dma_cache_wback_inv(start, sz);
 }
 EXPORT_SYMBOL(dma_cache_wback_inv);
 
-void dma_cache_inv(unsigned long start, unsigned long sz)
+void dma_cache_inv(phys_addr_t start, unsigned long sz)
 {
 	__dma_cache_inv(start, sz);
 }
 EXPORT_SYMBOL(dma_cache_inv);
 
-void dma_cache_wback(unsigned long start, unsigned long sz)
+void dma_cache_wback(phys_addr_t start, unsigned long sz)
 {
 	__dma_cache_wback(start, sz);
 }
@@ -857,7 +864,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 	 * For !VIPT cache, all of this gets compiled out as
 	 * addr_not_cache_congruent() is 0
 	 */
-	if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
+	if (page_mapcount(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
 		__flush_dcache_page((unsigned long)kfrom, u_vaddr);
 		clean_src_k_mappings = 1;
 	}
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 29a46bb198cc..8c8e36fa5659 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -17,69 +17,61 @@
  */
 
 #include <linux/dma-mapping.h>
-#include <linux/dma-debug.h>
-#include <linux/export.h>
 #include <asm/cache.h>
 #include <asm/cacheflush.h>
 
-/*
- * Helpers for Coherent DMA API.
- */
-void *dma_alloc_noncoherent(struct device *dev, size_t size,
-			    dma_addr_t *dma_handle, gfp_t gfp)
-{
-	void *paddr;
-
-	/* This is linear addr (0x8000_0000 based) */
-	paddr = alloc_pages_exact(size, gfp);
-	if (!paddr)
-		return NULL;
-
-	/* This is bus address, platform dependent */
-	*dma_handle = (dma_addr_t)paddr;
-
-	return paddr;
-}
-EXPORT_SYMBOL(dma_alloc_noncoherent);
-
-void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
-			  dma_addr_t dma_handle)
-{
-	free_pages_exact((void *)dma_handle, size);
-}
-EXPORT_SYMBOL(dma_free_noncoherent);
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp)
+static void *arc_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
 {
-	void *paddr, *kvaddr;
+	unsigned long order = get_order(size);
+	struct page *page;
+	phys_addr_t paddr;
+	void *kvaddr;
+	int need_coh = 1, need_kvaddr = 0;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		return NULL;
 
 	/*
 	 * IOC relies on all data (even coherent DMA data) being in cache
 	 * Thus allocate normal cached memory
 	 *
 	 * The gains with IOC are two pronged:
-	 *   -For streaming data, elides needs for cache maintenance, saving
+	 *   -For streaming data, elides need for cache maintenance, saving
 	 *    cycles in flush code, and bus bandwidth as all the lines of a
 	 *    buffer need to be flushed out to memory
 	 *   -For coherent data, Read/Write to buffers terminate early in cache
 	 *   (vs. always going to memory - thus are faster)
 	 */
-	if (is_isa_arcv2() && ioc_exists)
-		return dma_alloc_noncoherent(dev, size, dma_handle, gfp);
+	if ((is_isa_arcv2() && ioc_exists) ||
+	    dma_get_attr(DMA_ATTR_NON_CONSISTENT, attrs))
+		need_coh = 0;
+
+	/*
+	 * - A coherent buffer needs MMU mapping to enforce non-cachability
+	 * - A highmem page needs a virtual handle (hence MMU mapping)
+	 *   independent of cachability
+	 */
+	if (PageHighMem(page) || need_coh)
+		need_kvaddr = 1;
 
 	/* This is linear addr (0x8000_0000 based) */
-	paddr = alloc_pages_exact(size, gfp);
-	if (!paddr)
-		return NULL;
+	paddr = page_to_phys(page);
 
-	/* This is kernel Virtual address (0x7000_0000 based) */
-	kvaddr = ioremap_nocache((unsigned long)paddr, size);
-	if (kvaddr == NULL)
-		return NULL;
+	*dma_handle = plat_phys_to_dma(dev, paddr);
 
-	/* This is bus address, platform dependent */
-	*dma_handle = (dma_addr_t)paddr;
+	/* This is kernel Virtual address (0x7000_0000 based) */
+	if (need_kvaddr) {
+		kvaddr = ioremap_nocache(paddr, size);
+		if (kvaddr == NULL) {
+			__free_pages(page, order);
+			return NULL;
+		}
+	} else {
+		kvaddr = (void *)(u32)paddr;
+	}
 
 	/*
 	 * Evict any existing L1 and/or L2 lines for the backing page
@@ -91,30 +83,121 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 	 * Currently flush_cache_vmap nukes the L1 cache completely which
 	 * will be optimized as a separate commit
 	 */
-	dma_cache_wback_inv((unsigned long)paddr, size);
+	if (need_coh)
+		dma_cache_wback_inv(paddr, size);
 
 	return kvaddr;
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void dma_free_coherent(struct device *dev, size_t size, void *kvaddr,
-		       dma_addr_t dma_handle)
+static void arc_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
-	if (is_isa_arcv2() && ioc_exists)
-		return dma_free_noncoherent(dev, size, kvaddr, dma_handle);
+	struct page *page = virt_to_page(dma_handle);
+	int is_non_coh = 1;
+
+	is_non_coh = dma_get_attr(DMA_ATTR_NON_CONSISTENT, attrs) ||
+			(is_isa_arcv2() && ioc_exists);
 
-	iounmap((void __force __iomem *)kvaddr);
+	if (PageHighMem(page) || !is_non_coh)
+		iounmap((void __force __iomem *)vaddr);
 
-	free_pages_exact((void *)dma_handle, size);
+	__free_pages(page, get_order(size));
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
 /*
- * Helper for streaming DMA...
+ * streaming DMA Mapping API...
+ * CPU accesses page via normal paddr, thus needs to explicitly made
+ * consistent before each use
  */
-void __arc_dma_cache_sync(unsigned long paddr, size_t size,
-			  enum dma_data_direction dir)
+static void _dma_cache_sync(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_FROM_DEVICE:
+		dma_cache_inv(paddr, size);
+		break;
+	case DMA_TO_DEVICE:
+		dma_cache_wback(paddr, size);
+		break;
+	case DMA_BIDIRECTIONAL:
+		dma_cache_wback_inv(paddr, size);
+		break;
+	default:
+		pr_err("Invalid DMA dir [%d] for OP @ %pa[p]\n", dir, &paddr);
+	}
+}
+
+static dma_addr_t arc_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
 {
-	__inline_dma_cache_sync(paddr, size, dir);
+	phys_addr_t paddr = page_to_phys(page) + offset;
+	_dma_cache_sync(paddr, size, dir);
+	return plat_phys_to_dma(dev, paddr);
 }
-EXPORT_SYMBOL(__arc_dma_cache_sync);
+
+static int arc_dma_map_sg(struct device *dev, struct scatterlist *sg,
+	   int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	struct scatterlist *s;
+	int i;
+
+	for_each_sg(sg, s, nents, i)
+		s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+					       s->length, dir);
+
+	return nents;
+}
+
+static void arc_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size, enum dma_data_direction dir)
+{
+	_dma_cache_sync(plat_dma_to_phys(dev, dma_handle), size, DMA_FROM_DEVICE);
+}
+
+static void arc_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size, enum dma_data_direction dir)
+{
+	_dma_cache_sync(plat_dma_to_phys(dev, dma_handle), size, DMA_TO_DEVICE);
+}
+
+static void arc_dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction dir)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nelems, i)
+		_dma_cache_sync(sg_phys(sg), sg->length, dir);
+}
+
+static void arc_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction dir)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nelems, i)
+		_dma_cache_sync(sg_phys(sg), sg->length, dir);
+}
+
+static int arc_dma_supported(struct device *dev, u64 dma_mask)
+{
+	/* Support 32 bit DMA mask exclusively */
+	return dma_mask == DMA_BIT_MASK(32);
+}
+
+struct dma_map_ops arc_dma_ops = {
+	.alloc			= arc_dma_alloc,
+	.free			= arc_dma_free,
+	.map_page		= arc_dma_map_page,
+	.map_sg			= arc_dma_map_sg,
+	.sync_single_for_device	= arc_dma_sync_single_for_device,
+	.sync_single_for_cpu	= arc_dma_sync_single_for_cpu,
+	.sync_sg_for_cpu	= arc_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= arc_dma_sync_sg_for_device,
+	.dma_supported		= arc_dma_supported,
+};
+EXPORT_SYMBOL(arc_dma_ops);
diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c
index 065ee6bfa82a..04f83322c9fd 100644
--- a/arch/arc/mm/highmem.c
+++ b/arch/arc/mm/highmem.c
@@ -18,7 +18,7 @@
 /*
  * HIGHMEM API:
  *
- * kmap() API provides sleep semantics hence refered to as "permanent maps"
+ * kmap() API provides sleep semantics hence referred to as "permanent maps"
  * It allows mapping LAST_PKMAP pages, using @last_pkmap_nr as the cursor
  * for book-keeping
  *
@@ -111,7 +111,7 @@ void __kunmap_atomic(void *kv)
 }
 EXPORT_SYMBOL(__kunmap_atomic);
 
-noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr)
+static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr)
 {
 	pgd_t *pgd_k;
 	pud_t *pud_k;
@@ -127,7 +127,7 @@ noinline pte_t *alloc_kmap_pgtable(unsigned long kvaddr)
 	return pte_k;
 }
 
-void kmap_init(void)
+void __init kmap_init(void)
 {
 	/* Due to recursive include hell, we can't do this in processor.h */
 	BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE));
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index a9305b5a2cd4..7d2c4fbf4f22 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -51,7 +51,9 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	int in_use = 0;
 
 	if (!low_mem_sz) {
-		BUG_ON(base != low_mem_start);
+		if (base != low_mem_start)
+			panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
+
 		low_mem_sz = size;
 		in_use = 1;
 	} else {
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 739e65f355de..49b8abd1115c 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -14,18 +14,33 @@
 #include <linux/slab.h>
 #include <linux/cache.h>
 
-void __iomem *ioremap(unsigned long paddr, unsigned long size)
+static inline bool arc_uncached_addr_space(phys_addr_t paddr)
 {
-	unsigned long end;
+	if (is_isa_arcompact()) {
+		if (paddr >= ARC_UNCACHED_ADDR_SPACE)
+			return true;
+	} else if (paddr >= perip_base && paddr <= 0xFFFFFFFF) {
+		return true;
+	}
+
+	return false;
+}
+
+void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
+{
+	phys_addr_t end;
 
 	/* Don't allow wraparound or zero size */
 	end = paddr + size - 1;
 	if (!size || (end < paddr))
 		return NULL;
 
-	/* If the region is h/w uncached, avoid MMU mappings */
-	if (paddr >= ARC_UNCACHED_ADDR_SPACE)
-		return (void __iomem *)paddr;
+	/*
+	 * If the region is h/w uncached, MMU mapping can be elided as optim
+	 * The cast to u32 is fine as this region can only be inside 4GB
+	 */
+	if (arc_uncached_addr_space(paddr))
+		return (void __iomem *)(u32)paddr;
 
 	return ioremap_prot(paddr, size, PAGE_KERNEL_NO_CACHE);
 }
@@ -41,9 +56,9 @@ EXPORT_SYMBOL(ioremap);
 void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 			   unsigned long flags)
 {
-	void __iomem *vaddr;
+	unsigned long vaddr;
 	struct vm_struct *area;
-	unsigned long off, end;
+	phys_addr_t off, end;
 	pgprot_t prot = __pgprot(flags);
 
 	/* Don't allow wraparound, zero size */
@@ -70,9 +85,8 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 	if (!area)
 		return NULL;
 	area->phys_addr = paddr;
-	vaddr = (void __iomem *)area->addr;
-	if (ioremap_page_range((unsigned long)vaddr,
-			       (unsigned long)vaddr + size, paddr, prot)) {
+	vaddr = (unsigned long)area->addr;
+	if (ioremap_page_range(vaddr, vaddr + size, paddr, prot)) {
 		vunmap((void __force *)vaddr);
 		return NULL;
 	}
@@ -83,7 +97,8 @@ EXPORT_SYMBOL(ioremap_prot);
 
 void iounmap(const void __iomem *addr)
 {
-	if (addr >= (void __force __iomem *)ARC_UNCACHED_ADDR_SPACE)
+	/* weird double cast to handle phys_addr_t > 32 bits */
+	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
 		return;
 
 	vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 0ee739846847..7046c12c58ed 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -45,7 +45,7 @@
  *       in interrupt-safe region.
  *
  * Vineetg: April 23rd Bug #93131
- *    Problem: tlb_flush_kernel_range() doesnt do anything if the range to
+ *    Problem: tlb_flush_kernel_range() doesn't do anything if the range to
  *              flush is more than the size of TLB itself.
  *
  * Rahul Trivedi : Codito Technologies 2004
@@ -167,7 +167,7 @@ static void utlb_invalidate(void)
 	/* MMU v2 introduced the uTLB Flush command.
 	 * There was however an obscure hardware bug, where uTLB flush would
 	 * fail when a prior probe for J-TLB (both totally unrelated) would
-	 * return lkup err - because the entry didnt exist in MMU.
+	 * return lkup err - because the entry didn't exist in MMU.
 	 * The Workround was to set Index reg with some valid value, prior to
 	 * flush. This was fixed in MMU v3 hence not needed any more
 	 */
@@ -210,7 +210,7 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
 
 	/*
 	 * Commit the Entry to MMU
-	 * It doesnt sound safe to use the TLBWriteNI cmd here
+	 * It doesn't sound safe to use the TLBWriteNI cmd here
 	 * which doesn't flush uTLBs. I'd rather be safe than sorry.
 	 */
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
@@ -619,10 +619,10 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
 
 		int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
 		if (dirty) {
-			/* wback + inv dcache lines */
+			/* wback + inv dcache lines (K-mapping) */
 			__flush_dcache_page(paddr, paddr);
 
-			/* invalidate any existing icache lines */
+			/* invalidate any existing icache lines (U-mapping) */
 			if (vma->vm_flags & VM_EXEC)
 				__inv_icache_page(paddr, vaddr);
 		}
@@ -636,7 +636,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
  * support.
  *
  * Normal and Super pages can co-exist (ofcourse not overlap) in TLB with a
- * new bit "SZ" in TLB page desciptor to distinguish between them.
+ * new bit "SZ" in TLB page descriptor to distinguish between them.
  * Super Page size is configurable in hardware (4K to 16M), but fixed once
  * RTL builds.
  *
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index 63860adc4814..f1967eeb32e7 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -88,7 +88,7 @@ ex_saved_reg1:
 #ifdef CONFIG_SMP
 	sr  r0, [ARC_REG_SCRATCH_DATA0]	; freeup r0 to code with
 	GET_CPU_ID  r0			; get to per cpu scratch mem,
-	lsl r0, r0, L1_CACHE_SHIFT	; cache line wide per cpu
+	asl r0, r0, L1_CACHE_SHIFT	; cache line wide per cpu
 	add r0, @ex_saved_reg1, r0
 #else
 	st    r0, [@ex_saved_reg1]
@@ -107,7 +107,7 @@ ex_saved_reg1:
 .macro TLBMISS_RESTORE_REGS
 #ifdef CONFIG_SMP
 	GET_CPU_ID  r0			; get to per cpu scratch mem
-	lsl r0, r0, L1_CACHE_SHIFT	; each is cache line wide
+	asl r0, r0, L1_CACHE_SHIFT	; each is cache line wide
 	add r0, @ex_saved_reg1, r0
 	ld_s  r3, [r0,12]
 	ld_s  r2, [r0, 8]
@@ -256,7 +256,7 @@ ex_saved_reg1:
 
 .macro CONV_PTE_TO_TLB
 	and    r3, r0, PTE_BITS_RWX	;          r  w  x
-	lsl    r2, r3, 3		; Kr Kw Kx 0  0  0 (GLOBAL, kernel only)
+	asl    r2, r3, 3		; Kr Kw Kx 0  0  0 (GLOBAL, kernel only)
 	and.f  0,  r0, _PAGE_GLOBAL
 	or.z   r2, r2, r3		; Kr Kw Kx Ur Uw Ux (!GLOBAL, user page)
 
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index d475f9d4847c..426ac4b8bb39 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -11,6 +11,7 @@ menuconfig ARC_PLAT_AXS10X
 	select DW_APB_ICTL
 	select GPIO_DWAPB
 	select OF_GPIO
+	select MIGHT_HAVE_PCI
 	select GENERIC_IRQ_CHIP
 	select ARCH_REQUIRE_GPIOLIB
 	help
diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c
index dde692812bc1..e4fe51456808 100644
--- a/arch/arc/plat-sim/platform.c
+++ b/arch/arc/plat-sim/platform.c
@@ -10,7 +10,6 @@
 
 #include <linux/init.h>
 #include <asm/mach_desc.h>
-#include <asm/mcip.h>
 
 /*----------------------- Machine Descriptions ------------------------------
  *
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f1ed1109f488..cdfa6c2b7626 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2,6 +2,7 @@ config ARM
 	bool
 	default y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H
@@ -20,6 +21,7 @@ config ARM
 	select GENERIC_ALLOCATOR
 	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
@@ -33,19 +35,20 @@ config ARM
 	select HARDIRQS_SW_RESEND
 	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32
-	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_BPF_JIT
 	select HAVE_CC_STACKPROTECTOR
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32
+	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
@@ -76,6 +79,8 @@ config ARM
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_REL
 	select NO_BOOTMEM
+	select OF_EARLY_FLATTREE if OF
+	select OF_RESERVED_MEM if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
 	select PERF_USE_VMALLOC
@@ -162,11 +167,6 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
-config HAVE_LATENCYTOP_SUPPORT
-	bool
-	depends on !SMP
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
@@ -239,7 +239,6 @@ config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED
 	default y
 	depends on !XIP_KERNEL && MMU
-	depends on !ARCH_REALVIEW || !SPARSEMEM
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
@@ -306,13 +305,21 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARCH_MMAP_RND_BITS_MIN
+	default 8
+
+config ARCH_MMAP_RND_BITS_MAX
+	default 14 if PAGE_OFFSET=0x40000000
+	default 15 if PAGE_OFFSET=0x80000000
+	default 16
+
 #
 # The "ARM system type" choice list is ordered alphabetically by option
 # text.  Please add new entries in the option alphabetic order.
 #
 choice
 	prompt "ARM system type"
-	default ARCH_VERSATILE if !MMU
+	default ARM_SINGLE_ARMV7M if !MMU
 	default ARCH_MULTIPLATFORM if MMU
 
 config ARCH_MULTIPLATFORM
@@ -344,38 +351,6 @@ config ARM_SINGLE_ARMV7M
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select NEED_MACH_MEMORY_H
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-config ARCH_VERSATILE
-	bool "ARM Ltd. Versatile family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
-	select PLAT_VERSATILE_SCHED_CLOCK
-	select VERSATILE_FPGA_IRQ
-	help
-	  This enables support for ARM Ltd Versatile board.
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
@@ -510,55 +485,15 @@ config ARCH_DOVE
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
+	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_MV78XX0
-	bool "Marvell MV78xx0"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell MV78xx0 series SoCs:
-	  MV781x0, MV782x0.
-
-config ARCH_ORION5X
-	bool "Marvell Orion"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	select MULTI_IRQ_HANDLER
-	help
-	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281), Orion-1-90 (6183).
-
-config ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PLAT_PXA
 	select SPARSE_IRQ
+	select PM_GENERIC_DOMAINS if PM
 	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+	  Support for the Marvell Dove SoC 88AP510
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
@@ -592,10 +527,10 @@ config ARCH_LPC32XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_LPC32XX
+	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
 	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
@@ -609,8 +544,10 @@ config ARCH_PXA
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
+	select CLKSRC_PXA
 	select CLKSRC_MMIO
 	select CLKSRC_OF
+	select CPU_XSCALE if !CPU_XSC3
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select HAVE_IDE
@@ -621,28 +558,6 @@ config ARCH_PXA
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
-config ARCH_SHMOBILE_LEGACY
-	bool "Renesas ARM SoCs (non-multiplatform)"
-	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select MULTI_IRQ_HANDLER
-	select NO_IOPORT_MAP
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select SH_CLK_CPG
-	select SPARSE_IRQ
-	help
-	  Support for Renesas ARM SoC platforms using a non-multiplatform
-	  kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
-	  and RZ families.
-
 config ARCH_RPC
 	bool "RiscPC"
 	depends on MMU
@@ -658,7 +573,6 @@ config ARCH_RPC
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
 	select NO_IOPORT_MAP
-	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -670,6 +584,8 @@ config ARCH_SA1100
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_PXA
+	select CLKSRC_OF if OF
 	select CPU_FREQ
 	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
@@ -702,42 +618,16 @@ config ARCH_S3C24XX
 	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
 	  Samsung SMDK2410 development board (and derivatives).
 
-config ARCH_S3C64XX
-	bool "Samsung S3C64XX"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_VIC
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK_SAMSUNG
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_TCM
-	select NO_IOPORT_MAP
-	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND
-	select S3C_GPIO_TRACK
-	select SAMSUNG_ATAGS
-	select SAMSUNG_WAKEMASK
-	select SAMSUNG_WDT_RESET
-	help
-	  Samsung S3C64XX series based systems
-
 config ARCH_DAVINCI
 	bool "TI DaVinci"
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CPU_ARM926T
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select HAVE_IDE
-	select TI_PRIV_EDMA
 	select USE_OF
 	select ZONE_DMA
 	help
@@ -817,9 +707,11 @@ config ARCH_MULTI_CPU_AUTO
 endmenu
 
 config ARCH_VIRT
-	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
+	select ARM_GIC_V2M if PCI_MSI
 	select ARM_GIC_V3
 	select ARM_PSCI
 	select HAVE_ARM_ARCH_TIMER
@@ -833,6 +725,8 @@ source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-alpine/Kconfig"
 
+source "arch/arm/mach-artpec/Kconfig"
+
 source "arch/arm/mach-asm9260/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -939,6 +833,8 @@ source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-prima2/Kconfig"
 
+source "arch/arm/mach-tango/Kconfig"
+
 source "arch/arm/mach-tegra/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
@@ -986,10 +882,16 @@ config ARCH_STM32
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARMV7M_SYSTICK
 	select CLKSRC_STM32
+	select PINCTRL
 	select RESET_CONTROLLER
 	help
 	  Support for STMicroelectronics STM32 processors.
 
+config MACH_STM32F429
+	bool "STMicrolectronics STM32F429"
+	depends on ARCH_STM32
+	default y
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -1319,7 +1221,6 @@ config PCI_HOST_ITE8152
 	select DMABOUNCE
 
 source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
@@ -1443,8 +1344,7 @@ config BIG_LITTLE
 
 config BL_SWITCHER
 	bool "big.LITTLE switcher support"
-	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
-	select ARM_CPU_SUSPEND
+	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
 	select CPU_PM
 	help
 	  The big.LITTLE "switcher" provides the core functionality to
@@ -1502,7 +1402,7 @@ config HOTPLUG_CPU
 
 config ARM_PSCI
 	bool "Support for the ARM Power State Coordination Interface (PSCI)"
-	depends on CPU_V7
+	depends on HAVE_ARM_SMCCC
 	select ARM_PSCI_FW
 	help
 	  Say Y here if you want Linux to communicate with system firmware
@@ -1538,7 +1438,6 @@ config HZ_FIXED
 	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
 		ARCH_S5PV210 || ARCH_EXYNOS4
 	default 128 if SOC_AT91RM9200
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
 	default 0
 
 choice
@@ -1626,6 +1525,24 @@ config THUMB2_AVOID_R_ARM_THM_JUMP11
 config ARM_ASM_UNIFIED
 	bool
 
+config ARM_PATCH_IDIV
+	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
+	depends on CPU_32v7 && !XIP_KERNEL
+	default y
+	help
+	  The ARM compiler inserts calls to __aeabi_idiv() and
+	  __aeabi_uidiv() when it needs to perform division on signed
+	  and unsigned integers. Some v7 CPUs have support for the sdiv
+	  and udiv instructions that can be used to implement those
+	  functions.
+
+	  Enabling this option allows the kernel to modify itself to
+	  replace the first two instructions of these library functions
+	  with the sdiv or udiv plus "bx lr" instructions when the CPU
+	  it is running on supports them. Typically this will be faster
+	  and less power intensive than running the original library
+	  code to do integer division.
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
@@ -1757,8 +1674,7 @@ config ARM_MODULE_PLTS
 source "mm/Kconfig"
 
 config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
-	range 11 64 if ARCH_SHMOBILE_LEGACY
+	int "Maximum zone order"
 	default "12" if SOC_AM33XX
 	default "9" if SA1111 || ARCH_EFM32
 	default "11"
@@ -1823,6 +1739,25 @@ config SWIOTLB
 config IOMMU_HELPER
 	def_bool SWIOTLB
 
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	default n
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
 config XEN_DOM0
 	def_bool y
 	depends on XEN
@@ -1836,6 +1771,7 @@ config XEN
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
 	select SWIOTLB_XEN
+	select PARAVIRT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
@@ -1847,8 +1783,6 @@ config USE_OF
 	bool "Flattened Device Tree support"
 	select IRQ_DOMAIN
 	select OF
-	select OF_EARLY_FLATTREE
-	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -2065,6 +1999,25 @@ config AUTO_ZRELADDR
 	  0xf8000000. This assumes the zImage being placed in the first 128MB
 	  from start of memory.
 
+config EFI_STUB
+	bool
+
+config EFI
+	bool "UEFI runtime support"
+	depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
+	select UCS2_STRING
+	select EFI_PARAMS_FROM_FDT
+	select EFI_STUB
+	select EFI_ARMSTUB
+	select EFI_RUNTIME_WRAPPERS
+	---help---
+	  This option provides support for runtime services provided
+	  by UEFI firmware (such as non-volatile variables, realtime
+	  clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful for kernels that may run on systems that have
+	  UEFI firmware.
+
 endmenu
 
 menu "CPU Power Management"
@@ -2165,7 +2118,8 @@ config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
 config ARM_CPU_SUSPEND
-	def_bool PM_SLEEP
+	def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
+	depends on ARCH_SUSPEND_POSSIBLE
 
 config ARCH_HIBERNATION_POSSIBLE
 	bool
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0cfd7f947f6b..1098e91d6d3f 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -15,20 +15,6 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-          If in doubt, say Y.
-
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to
@@ -123,33 +109,32 @@ choice
 		    0x80020000      | 0xf0020000     | UART8
 		    0x80024000      | 0xf0024000     | UART9
 
-	config AT91_DEBUG_LL_DBGU0
-		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
-		select DEBUG_AT91_UART
+	config DEBUG_AT91_UART
+		bool "Kernel low-level debugging on Atmel SoCs"
 		depends on ARCH_AT91
-		depends on SOC_AT91RM9200 || SOC_AT91SAM9
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on atmel devices.
 
-	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
-		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_AT91SAM9 || SOC_SAMA5
+		  SOC                  DEBUG_UART_PHYS   DEBUG_UART_VIRT  PORT
+		  rm9200, 9260/9g20,   0xfffff200        0xfefff200       DBGU
+		  9261/9g10, 9rl
+		  9263, 9g45, sama5d3  0xffffee00        0xfeffee00       DBGU
+		  sama5d4              0xfc00c000        0xfb00c000       USART3
+		  sama5d4              0xfc069000        0xfb069000       DBGU
+		  sama5d2              0xf8020000        0xf7020000       UART1
 
-	config AT91_DEBUG_LL_DBGU2
-		bool "Kernel low-level debugging on sama5d4"
-		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_SAMA5
-
-	config AT91_DEBUG_LL_DBGU3
-		bool "Kernel low-level debugging on sama5d2"
-		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_SAMA5
+		  Please adjust DEBUG_UART_PHYS configuration options based on
+		  your needs.
 
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
-		depends on ARCH_BCM2835
+		depends on ARCH_BCM2835 && ARCH_MULTI_V6
+		select DEBUG_UART_PL01X
+
+	config DEBUG_BCM2836
+		bool "Kernel low-level debugging on BCM2836 PL011 UART"
+		depends on ARCH_BCM2835 && ARCH_MULTI_V7
 		select DEBUG_UART_PL01X
 
 	config DEBUG_BCM_5301X
@@ -168,10 +153,9 @@ choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
 		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -238,23 +222,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART0 serial port on DaVinci DMx devices.
 
-	config DEBUG_ZYNQ_UART0
-		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
-		depends on ARCH_ZYNQ
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 on the Zynq platform.
-
-	config DEBUG_ZYNQ_UART1
-		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
-		depends on ARCH_ZYNQ
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART1 on the Zynq platform.
-
-		  If you have a ZC702 board and want early boot messages to
-		  appear on the USB serial adaptor, select this option.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -269,13 +236,30 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UA0 serial port in the CX92755.
 
+	config DEBUG_EP93XX
+		bool "Kernel low-level debugging messages via ep93xx UART"
+		depends on ARCH_EP93XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Cirrus Logic EP93xx based platforms.
+
 	config DEBUG_FOOTBRIDGE_COM1
 		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
 		depends on FOOTBRIDGE
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the 8250 at PCI COM1.
 
+	config DEBUG_GEMINI
+		bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+		depends on ARCH_GEMINI
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Cortina Gemini based platforms.
+
 	config DEBUG_HI3620_UART
 		bool "Hisilicon HI3620 Debug UART"
 		depends on ARCH_HI3xxx
@@ -431,6 +415,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX7D.
 
+	config DEBUG_INTEGRATOR
+		bool "Kernel low-level debugging messages via ARM Integrator UART"
+		depends on ARCH_INTEGRATOR
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ARM Integrator platforms.
+
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
@@ -462,6 +454,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on NXP LPC18xx/43xx UART0.
 
+	config DEBUG_LPC32XX
+		bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+		depends on ARCH_LPC32XX
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NXP LPC32xx based platforms.
+
 	config DEBUG_MESON_UARTAO
 		bool "Kernel low-level debugging via Meson6 UARTAO"
 		depends on ARCH_MESON
@@ -485,26 +485,10 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
 
-	config DEBUG_QCOM_UARTDM
-		bool "Kernel low-level debugging messages via QCOM UARTDM"
-		depends on ARCH_QCOM
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on Qualcomm devices.
-
-		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
-		  APQ8064   0x16640000        0xf0040000
-		  APQ8084   0xf995e000        0xfa75e000
-		  MSM8X60   0x19c40000        0xf0040000
-		  MSM8960   0x16440000        0xf0040000
-		  MSM8974   0xf991e000        0xfa71e000
-
-		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
-		  options based on your needs.
-
 	config DEBUG_MVEBU_UART0
 		bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
 		depends on ARCH_MVEBU
+		depends on ARCH_MVEBU && CPU_V7
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
@@ -517,17 +501,23 @@ choice
 		  Plathome OpenBlocks AX3, when using the original
 		  bootloader.
 
+		  This option will not work on older Marvell platforms
+		  (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
+		  the "new bootloader" variant.
+
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
 	config DEBUG_MVEBU_UART0_ALTERNATE
 		bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
-		depends on ARCH_MVEBU
+		depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms on UART0.
+		  on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
+
 
 		  This option should be used with the new bootloaders
 		  that remap the internal registers at 0xf1000000.
@@ -542,21 +532,41 @@ choice
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms on UART1.
+		  on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
 
 		  This option should be used with the new bootloaders
 		  that remap the internal registers at 0xf1000000.
+		  All of the older (pre Armada XP/370) platforms also use
+		  this address, regardless of the boot loader version.
 
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
-	config DEBUG_VF_UART
-		bool "Vybrid UART"
-		depends on SOC_VF610
+	config DEBUG_MT6589_UART0
+		bool "Mediatek mt6589 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on Vybrid based platforms.
+		  for Mediatek mt6589 based platforms on UART0.
+
+	config DEBUG_MT8127_UART0
+		bool "Mediatek mt8127/mt6592 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8127 based platforms on UART0.
+
+	config DEBUG_MT8135_UART3
+		bool "Mediatek mt8135 UART3"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8135 based platforms on UART3.
 
 	config DEBUG_NETX_UART
 		bool "Kernel low-level debugging messages via NetX UART"
@@ -720,6 +730,23 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on PXA UART1.
 
+	config DEBUG_QCOM_UARTDM
+		bool "Kernel low-level debugging messages via QCOM UARTDM"
+		depends on ARCH_QCOM
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on Qualcomm devices.
+
+		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
+		  APQ8064   0x16640000        0xf0040000
+		  APQ8084   0xf995e000        0xfa75e000
+		  MSM8X60   0x19c40000        0xf0040000
+		  MSM8960   0x16440000        0xf0040000
+		  MSM8974   0xf991e000        0xfa71e000
+
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -863,6 +890,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
 		help
@@ -874,6 +902,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
 		help
@@ -885,6 +914,7 @@ choice
 		depends on PLAT_SAMSUNG
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
 		help
@@ -895,6 +925,7 @@ choice
 	config DEBUG_S3C_UART3
 		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 3 for low-level debug"
 		help
@@ -986,6 +1017,70 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A31/A23 based platforms on the R_UART.
 
+	config DEBUG_SIRFPRIMA2_UART1
+		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+		depends on ARCH_PRIMA2
+		select DEBUG_SIRFSOC_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFprimaII devices.
+
+	config DEBUG_SIRFATLAS7_UART0
+		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
+		depends on ARCH_ATLAS7
+		select DEBUG_SIRFSOC_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
+		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
+		  debug port can be very useful.
+
+	config DEBUG_SIRFATLAS7_UART1
+		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
+		depends on ARCH_ATLAS7
+		select DEBUG_SIRFSOC_UART
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFATLAS7 devices.
+
+	config DEBUG_SPEAR3XX
+		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr based platforms.
+
+	config DEBUG_SPEAR13XX
+		bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+		depends on ARCH_SPEAR13XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr13xx based platforms.
+
+	config STIH41X_DEBUG_ASC2
+		bool "Use StiH415/416 ASC2 UART for low-level debug"
+		depends on ARCH_STI
+		select DEBUG_STI_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2000, which has
+		  default UART wired up to ASC2.
+
+		  If unsure, say N.
+
+	config STIH41X_DEBUG_SBC_ASC1
+		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+		depends on ARCH_STI
+		select DEBUG_STI_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2020. which has
+		  default UART wired up to SBC ASC1.
+
+		  If unsure, say N.
+
 	config TEGRA_DEBUG_UART_AUTO_ODMDATA
 		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 		depends on ARCH_TEGRA
@@ -1038,54 +1133,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
-	config DEBUG_SIRFPRIMA2_UART1
-		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
-		depends on ARCH_PRIMA2
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFprimaII devices.
-
-	config DEBUG_SIRFATLAS7_UART0
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
-		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
-		  debug port can be very useful.
-
-	config DEBUG_SIRFATLAS7_UART1
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFATLAS7 devices.
-
-	config STIH41X_DEBUG_ASC2
-		bool "Use StiH415/416 ASC2 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2000, which has
-		  default UART wired up to ASC2.
-
-		  If unsure, say N.
-
-	config STIH41X_DEBUG_SBC_ASC1
-		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2020. which has
-		  default UART wired up to SBC ASC1.
-
-		  If unsure, say N.
-
 	config DEBUG_U300_UART
 		bool "Kernel low-level debugging messages via U300 UART0"
 		depends on ARCH_U300
@@ -1101,29 +1148,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Ux500 based platforms.
 
-	config DEBUG_MT6589_UART0
-		bool "Mediatek mt6589 UART0"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt6589 based platforms on UART0.
-
-	config DEBUG_MT8127_UART0
-		bool "Mediatek mt8127/mt6592 UART0"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt8127 based platforms on UART0.
-
-	config DEBUG_MT8135_UART3
-		bool "Mediatek mt8135 UART3"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
+	config DEBUG_VERSATILE
+		bool "Kernel low-level debugging messages via ARM Versatile UART"
+		depends on ARCH_VERSATILE
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt8135 based platforms on UART3.
+		  on ARM Versatile platforms.
 
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
@@ -1161,6 +1192,13 @@ choice
 		  This option selects UART0 at 0xb0090000. This is appropriate for
 		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
 
+	config DEBUG_VF_UART
+		bool "Vybrid UART"
+		depends on SOC_VF610
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Vybrid based platforms.
+
 	config DEBUG_VT8500_UART0
 		bool "Use UART0 on VIA/Wondermedia SoCs"
 		depends on ARCH_VT8500
@@ -1168,6 +1206,35 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
+	config DEBUG_ZTE_ZX
+		bool "Use ZTE ZX UART"
+		select DEBUG_UART_PL01X
+		depends on ARCH_ZX
+		help
+		  Say Y here if you are enabling ZTE ZX296702 SOC and need
+		  debug uart support.
+
+		  This option is preferred over the platform specific
+		  options; the platform specific options are deprecated
+		  and will be soon removed.
+
+	config DEBUG_ZYNQ_UART0
+		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 on the Zynq platform.
+
+	config DEBUG_ZYNQ_UART1
+		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 on the Zynq platform.
+
+		  If you have a ZC702 board and want early boot messages to
+		  appear on the USB serial adaptor, select this option.
+
 	config DEBUG_ICEDCC
 		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 		help
@@ -1195,18 +1262,6 @@ choice
 		  For more details about semihosting, please see
 		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
 
-	config DEBUG_ZTE_ZX
-		bool "Use ZTE ZX UART"
-		select DEBUG_UART_PL01X
-		depends on ARCH_ZX
-		help
-		  Say Y here if you are enabling ZTE ZX296702 SOC and need
-		  debug uart support.
-
-		  This option is preferred over the platform specific
-		  options; the platform specific options are deprecated
-		  and will be soon removed.
-
 	config DEBUG_LL_UART_8250
 		bool "Kernel low-level debugging via 8250 UART"
 		help
@@ -1249,10 +1304,6 @@ choice
 
 endchoice
 
-config DEBUG_AT91_UART
-	bool
-	depends on ARCH_AT91
-
 config DEBUG_EXYNOS_UART
 	bool
 
@@ -1263,6 +1314,9 @@ config DEBUG_S3C2410_UART
 config DEBUG_S3C24XX_UART
 	bool
 
+config DEBUG_S3C64XX_UART
+	bool
+
 config DEBUG_S5PV210_UART
 	bool
 
@@ -1314,10 +1368,12 @@ config DEBUG_SIRFSOC_UART
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/sa1100.S" if DEBUG_SA1100
+	default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default "debug/at91.S" if DEBUG_AT91_UART
 	default "debug/asm9260.S" if DEBUG_ASM9260_UART
 	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+	default "debug/dc21285.S" if DEBUG_DC21285_PORT
 	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
@@ -1348,7 +1404,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
 	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
 	default "debug/sti.S" if DEBUG_STI_UART
@@ -1358,7 +1414,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "mach/debug-macro.S"
 
@@ -1368,15 +1424,9 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_DOVE || ARCH_EBSA110 || \
-		(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
-		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
-		ARCH_IOP33X || ARCH_IXP4XX || \
-		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
+	def_bool ARCH_EBSA110 || \
+		ARCH_IOP13XX || ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || \
+		ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
@@ -1397,12 +1447,12 @@ config DEBUG_UART_PHYS
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0x10124000 if DEBUG_RK3X_UART0
 	default 0x10126000 if DEBUG_RK3X_UART1
-	default 0x101f1000 if ARCH_VERSATILE
+	default 0x101f1000 if DEBUG_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
 	default 0x11002000 if DEBUG_MT8127_UART0
 	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x11009000 if DEBUG_MT8135_UART3
-	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x16000000 if DEBUG_INTEGRATOR
 	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
 	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
@@ -1412,12 +1462,13 @@ config DEBUG_UART_PHYS
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
+	default 0x3f201000 if DEBUG_BCM2836
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
 	default 0x4000e400 if DEBUG_LL_UART_EFM32
 	default 0x40081000 if DEBUG_LPC18XX_UART0
-	default 0x40090000 if ARCH_LPC32XX
+	default 0x40090000 if DEBUG_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
-	default 0x42000000 if ARCH_GEMINI
+	default 0x42000000 if DEBUG_GEMINI
 	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
 				DEBUG_S3C2410_UART0)
 	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
@@ -1425,24 +1476,28 @@ config DEBUG_UART_PHYS
 	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
 				DEBUG_S3C2410_UART2)
 	default 0x78000000 if DEBUG_CNS3XXX
-	default 0x7c0003f8 if FOOTBRIDGE
+	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
+	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
 	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
 	default 0x80230000 if DEBUG_PICOXCELL_UART
-	default 0x808c0000 if ARCH_EP93XX
+	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
 	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
-	default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
+	default 0xd0000000 if DEBUG_SPEAR3XX
 	default 0xd0012000 if DEBUG_MVEBU_UART0
 	default 0xc81004c0 if DEBUG_MESON_UARTAO
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
-	default 0xe0000000 if ARCH_SPEAR13XX
+	default 0xe0000000 if DEBUG_SPEAR13XX
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
 	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
@@ -1454,8 +1509,6 @@ config DEBUG_UART_PHYS
 	default 0xf040ab00 if DEBUG_BRCMSTB_UART
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
-				ARCH_ORION5X
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8b00000 if DEBUG_HIX5HD2_UART
 	default 0xf991e000 if DEBUG_QCOM_UARTDM
@@ -1472,7 +1525,7 @@ config DEBUG_UART_PHYS
 	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
 	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
 	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xfffff700 if ARCH_IOP33X
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
@@ -1484,8 +1537,10 @@ config DEBUG_UART_PHYS
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
 		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1494,22 +1549,27 @@ config DEBUG_UART_VIRT
 	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf0010000 if DEBUG_ASM9260_UART
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
-	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
 	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf1002000 if DEBUG_MT8127_UART0
 	default 0xf1006000 if DEBUG_MT6589_UART0
 	default 0xf1009000 if DEBUG_MT8135_UART3
-	default 0xf11f1000 if ARCH_VERSATILE
-	default 0xf1600000 if ARCH_INTEGRATOR
+	default 0xf11f1000 if DEBUG_VERSATILE
+	default 0xf1600000 if DEBUG_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
 	default 0xf1c28400 if DEBUG_SUNXI_UART1
 	default 0xf1f02800 if DEBUG_SUNXI_R_UART
+	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xf4090000 if DEBUG_LPC32XX
+	default 0xf4200000 if DEBUG_GEMINI
 	default 0xf6200000 if DEBUG_PXA_UART1
-	default 0xf4090000 if ARCH_LPC32XX
-	default 0xf4200000 if ARCH_GEMINI
 	default 0xf7000000 if DEBUG_SUN9I_UART0
+	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
 				DEBUG_S3C2410_UART0)
+	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
 	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
 				DEBUG_S3C2410_UART1)
 	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
@@ -1524,14 +1584,12 @@ config DEBUG_UART_VIRT
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
 	default 0xfc705000 if DEBUG_ZTE_ZX
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
-	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
-	default 0xfd000000 if ARCH_SPEAR13XX
-	default 0xfd012000 if ARCH_MV78XX0
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
+	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_MV78XX0
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfde12000 if ARCH_DOVE
-	default 0xfe012000 if ARCH_ORION5X
-	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE
+	default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
@@ -1545,7 +1603,7 @@ config DEBUG_UART_VIRT
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
 	default 0xfec02000 if DEBUG_SOCFPGA_UART0
 	default 0xfec02100 if DEBUG_SOCFPGA_UART1
-	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
+	default 0xfec12000 if (DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE) && ARCH_MVEBU
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
 	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
@@ -1557,8 +1615,8 @@ config DEBUG_UART_VIRT
 	default 0xfed60000 if DEBUG_RK29_UART0
 	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
-	default 0xfedc0000 if ARCH_EP93XX
-	default 0xfee003f8 if FOOTBRIDGE
+	default 0xfedc0000 if DEBUG_EP93XX
+	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xfee82340 if ARCH_IOP13XX
 	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
@@ -1575,13 +1633,14 @@ config DEBUG_UART_VIRT
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
 		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
 		DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
 	default 2
 
@@ -1589,18 +1648,27 @@ config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
-		DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
+	default y if DEBUG_PICOXCELL_UART || \
+		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_UART1 || \
+		DEBUG_KEYSTONE_UART0 || DEBUG_KEYSTONE_UART1 || \
 		DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
 		DEBUG_DAVINCI_DA8XX_UART2 || \
 		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
 		DEBUG_BRCMSTB_UART
 
+config DEBUG_UART_8250_PALMCHIP
+	bool "8250 UART is Palmchip BK-310x"
+	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+	help
+	  Palmchip provides a UART implementation compatible with 16550
+	  except for having a different register layout.  Say Y here if
+	  the debug UART is of this type.
+
 config DEBUG_UART_8250_FLOW_CONTROL
 	bool "Enable flow control for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
+	default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
 
 config DEBUG_UNCOMPRESS
 	bool
@@ -1621,8 +1689,7 @@ config DEBUG_UNCOMPRESS
 config UNCOMPRESS_INCLUDE
 	string
 	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
-					ARCH_SHMOBILE_LEGACY
+					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
 	default "mach/uncompress.h"
 
 config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2c2b28ee4811..8c3ce2ac44c4 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -30,9 +30,8 @@ GZFLAGS		:=-9
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
-# Do not use arch/arm/defconfig - it's always outdated.
-# Select a platform tht is kept up-to-date
-KBUILD_DEFCONFIG := versatile_defconfig
+# This should work on most of the modern platforms
+KBUILD_DEFCONFIG := multi_v7_defconfig
 
 # defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
@@ -155,6 +154,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
+machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
@@ -211,6 +211,7 @@ machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
+machine-$(CONFIG_ARCH_TANGO)		+= tango
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
@@ -352,7 +353,6 @@ archclean:
 
 # My testing targets (bypasses dependencies)
 bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
-i zi:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 
 define archhelp
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 9eca7aee927f..48fab15cfc02 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -88,7 +88,7 @@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 	@$(kecho) '  Kernel: $@ is ready'
 
-PHONY += initrd FORCE
+PHONY += initrd
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
@@ -107,12 +107,4 @@ uinstall:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
 	$(obj)/uImage System.map "$(INSTALL_PATH)"
 
-zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 0714e0334e33..86b2f5d28240 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -3,11 +3,7 @@ bswapsdi2.S
 font.c
 lib1funcs.S
 hyp-stub.S
-piggy.gzip
-piggy.lzo
-piggy.lzma
-piggy.xzkern
-piggy.lz4
+piggy_data
 vmlinux
 vmlinux.lds
 
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3f9a9ebc77c3..d50430c40045 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -66,11 +66,11 @@ endif
 
 CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
 
-suffix_$(CONFIG_KERNEL_GZIP) = gzip
-suffix_$(CONFIG_KERNEL_LZO)  = lzo
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-suffix_$(CONFIG_KERNEL_XZ)   = xzkern
-suffix_$(CONFIG_KERNEL_LZ4)  = lz4
+compress-$(CONFIG_KERNEL_GZIP) = gzip
+compress-$(CONFIG_KERNEL_LZO)  = lzo
+compress-$(CONFIG_KERNEL_LZMA) = lzma
+compress-$(CONFIG_KERNEL_XZ)   = xzkern
+compress-$(CONFIG_KERNEL_LZ4)  = lz4
 
 # Borrowed libfdt files for the ATAG compatibility mode
 
@@ -89,15 +89,12 @@ ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 
-targets       := vmlinux vmlinux.lds \
-		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
-		 bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
+targets       := vmlinux vmlinux.lds piggy_data piggy.o \
+		 lib1funcs.o ashldi3.o bswapsdi2.o \
+		 head.o $(OBJS)
 
-# Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
-		 lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
-		 hyp-stub.S
+clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \
+		$(libfdt) $(libfdt_hdrs) hyp-stub.S
 
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
@@ -106,6 +103,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
+# -fstack-protector-strong triggers protection checks in this code,
+# but it is being used too early to link to meaningful stack_chk logic.
+nossp_flags := $(call cc-option, -fno-stack-protector)
+CFLAGS_atags_to_fdt.o := $(nossp_flags)
+CFLAGS_fdt.o := $(nossp_flags)
+CFLAGS_fdt_ro.o := $(nossp_flags)
+CFLAGS_fdt_rw.o := $(nossp_flags)
+CFLAGS_fdt_wip.o := $(nossp_flags)
+
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE
 
@@ -167,22 +173,26 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 	false; \
 fi
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
 		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) FORCE
+		$(bswapsdi2) $(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
 
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
-	$(call if_changed,$(suffix_y))
+$(obj)/piggy_data: $(obj)/../Image FORCE
+	$(call if_changed,$(compress-y))
 
-$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+$(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
 
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
+AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
+
 $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
 	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
new file mode 100644
index 000000000000..9d5dc4fda3c1
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013-2015 Linaro Ltd
+ * Authors: Roy Franz <roy.franz@linaro.org>
+ *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	__nop
+#ifdef CONFIG_EFI_STUB
+		@ This is almost but not quite a NOP, since it does clobber the
+		@ condition flags. But it is the best we can do for EFI, since
+		@ PE/COFF expects the magic string "MZ" at offset 0, while the
+		@ ARM/Linux boot protocol expects an executable instruction
+		@ there.
+		.inst	'M' | ('Z' << 8) | (0x1310 << 16)   @ tstne r0, #0x4d000
+#else
+		mov	r0, r0
+#endif
+		.endm
+
+		.macro	__EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+		b	__efi_start
+
+		.set	start_offset, __efi_start - start
+		.org	start + 0x3c
+		@
+		@ The PE header can be anywhere in the file, but for
+		@ simplicity we keep it together with the MSDOS header
+		@ The offset to the PE/COFF header needs to be at offset
+		@ 0x3C in the MSDOS header.
+		@ The only 2 fields of the MSDOS header that are used are this
+		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+		@
+		.long	pe_header - start	@ Offset to the PE header.
+
+pe_header:
+		.ascii	"PE\0\0"
+
+coff_header:
+		.short	0x01c2			@ ARM or Thumb
+		.short	2			@ nr_sections
+		.long	0 			@ TimeDateStamp
+		.long	0			@ PointerToSymbolTable
+		.long	1			@ NumberOfSymbols
+		.short	section_table - optional_header
+						@ SizeOfOptionalHeader
+		.short	0x306			@ Characteristics.
+						@ IMAGE_FILE_32BIT_MACHINE |
+						@ IMAGE_FILE_DEBUG_STRIPPED |
+						@ IMAGE_FILE_EXECUTABLE_IMAGE |
+						@ IMAGE_FILE_LINE_NUMS_STRIPPED
+
+optional_header:
+		.short	0x10b			@ PE32 format
+		.byte	0x02			@ MajorLinkerVersion
+		.byte	0x14			@ MinorLinkerVersion
+		.long	_end - __efi_start	@ SizeOfCode
+		.long	0			@ SizeOfInitializedData
+		.long	0			@ SizeOfUninitializedData
+		.long	efi_stub_entry - start	@ AddressOfEntryPoint
+		.long	start_offset		@ BaseOfCode
+		.long	0			@ data
+
+extra_header_fields:
+		.long	0			@ ImageBase
+		.long	0x200			@ SectionAlignment
+		.long	0x200			@ FileAlignment
+		.short	0			@ MajorOperatingSystemVersion
+		.short	0			@ MinorOperatingSystemVersion
+		.short	0			@ MajorImageVersion
+		.short	0			@ MinorImageVersion
+		.short	0			@ MajorSubsystemVersion
+		.short	0			@ MinorSubsystemVersion
+		.long	0			@ Win32VersionValue
+
+		.long	_end - start		@ SizeOfImage
+		.long	start_offset		@ SizeOfHeaders
+		.long	0			@ CheckSum
+		.short	0xa			@ Subsystem (EFI application)
+		.short	0			@ DllCharacteristics
+		.long	0			@ SizeOfStackReserve
+		.long	0			@ SizeOfStackCommit
+		.long	0			@ SizeOfHeapReserve
+		.long	0			@ SizeOfHeapCommit
+		.long	0			@ LoaderFlags
+		.long	0x6			@ NumberOfRvaAndSizes
+
+		.quad	0			@ ExportTable
+		.quad	0			@ ImportTable
+		.quad	0			@ ResourceTable
+		.quad	0			@ ExceptionTable
+		.quad	0			@ CertificationTable
+		.quad	0			@ BaseRelocationTable
+
+section_table:
+		@
+		@ The EFI application loader requires a relocation section
+		@ because EFI applications must be relocatable. This is a
+		@ dummy section as far as we are concerned.
+		@
+		.ascii	".reloc\0\0"
+		.long	0			@ VirtualSize
+		.long	0			@ VirtualAddress
+		.long	0			@ SizeOfRawData
+		.long	0			@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0x42100040		@ Characteristics
+
+		.ascii	".text\0\0\0"
+		.long	_end - __efi_start	@ VirtualSize
+		.long	__efi_start		@ VirtualAddress
+		.long	_edata - __efi_start	@ SizeOfRawData
+		.long	__efi_start		@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0xe0500020		@ Characteristics
+
+		.align	9
+__efi_start:
+#endif
+		.endm
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 06e983f59980..af11c2f8f3b7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -12,6 +12,8 @@
 #include <asm/assembler.h>
 #include <asm/v7m.h>
 
+#include "efi-header.S"
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -126,7 +128,7 @@
 start:
 		.type	start,#function
 		.rept	7
-		mov	r0, r0
+		__nop
 		.endr
    ARM(		mov	r0, r0		)
    ARM(		b	1f		)
@@ -139,7 +141,8 @@ start:
 		.word	0x04030201	@ endianness flag
 
  THUMB(		.thumb			)
-1:
+1:		__EFI_HEADER
+
  ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
  AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT
@@ -1353,6 +1356,53 @@ __enter_kernel:
 
 reloc_code_end:
 
+#ifdef CONFIG_EFI_STUB
+		.align	2
+_start:		.long	start - .
+
+ENTRY(efi_stub_entry)
+		@ allocate space on stack for passing current zImage address
+		@ and for the EFI stub to return of new entry point of
+		@ zImage, as EFI stub may copy the kernel. Pointer address
+		@ is passed in r2. r0 and r1 are passed through from the
+		@ EFI firmware to efi_entry
+		adr	ip, _start
+		ldr	r3, [ip]
+		add	r3, r3, ip
+		stmfd	sp!, {r3, lr}
+		mov	r2, sp			@ pass zImage address in r2
+		bl	efi_entry
+
+		@ Check for error return from EFI stub. r0 has FDT address
+		@ or error code.
+		cmn	r0, #1
+		beq	efi_load_fail
+
+		@ Preserve return value of efi_entry() in r4
+		mov	r4, r0
+		bl	cache_clean_flush
+		bl	cache_off
+
+		@ Set parameters for booting zImage according to boot protocol
+		@ put FDT address in r2, it was returned by efi_entry()
+		@ r1 is the machine type, and r0 needs to be 0
+		mov	r0, #0
+		mov	r1, #0xFFFFFFFF
+		mov	r2, r4
+
+		@ Branch to (possibly) relocated zImage that is in [sp]
+		ldr	lr, [sp]
+		ldr	ip, =start_offset
+		add	lr, lr, ip
+		mov	pc, lr				@ no mode switch
+
+efi_load_fail:
+		@ Return EFI_LOAD_ERROR to EFI firmware on error.
+		ldr	r0, =0x80000001
+		ldmfd	sp!, {ip, pc}
+ENDPROC(efi_stub_entry)
+#endif
+
 		.align
 		.section ".stack", "aw", %nobits
 .L_user_stack:	.space	4096
diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.S
index d7e69cffbc0a..f72088495f43 100644
--- a/arch/arm/boot/compressed/piggy.lzma.S
+++ b/arch/arm/boot/compressed/piggy.S
@@ -1,6 +1,6 @@
 	.section .piggydata,#alloc
 	.globl	input_data
 input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzma"
+	.incbin	"arch/arm/boot/compressed/piggy_data"
 	.globl	input_data_end
 input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S
deleted file mode 100644
index a68adf91a165..000000000000
--- a/arch/arm/boot/compressed/piggy.gzip.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gzip"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S
deleted file mode 100644
index 3d9a575618a3..000000000000
--- a/arch/arm/boot/compressed/piggy.lz4.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lz4"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S
deleted file mode 100644
index a425ad95959a..000000000000
--- a/arch/arm/boot/compressed/piggy.lzo.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzo"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S
deleted file mode 100644
index 5703f300d027..000000000000
--- a/arch/arm/boot/compressed/piggy.xzkern.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.xzkern"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index 36e53ef9200f..689467448736 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -65,6 +65,15 @@ size_t strlen(const char *s)
 	return sc - s;
 }
 
+size_t strnlen(const char *s, size_t count)
+{
+	const char *sc;
+
+	for (sc = s; count-- && *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
 int memcmp(const void *cs, const void *ct, size_t count)
 {
 	const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 2b60b843ac5e..81c493156ce8 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -48,6 +48,13 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
   }
+  .data : {
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub)
+  }
   .piggydata : {
     *(.piggydata)
   }
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6019f5d3ad7f..95c1923ce6fa 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -2,6 +2,8 @@ ifeq ($(CONFIG_OF),y)
 
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
 dtb-$(CONFIG_MACH_ASM9260) += \
 	alphascale-asm9260-devkit.dtb
 # Keep at91 dtb files sorted alphabetically for each SoC
@@ -48,8 +50,10 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	sama5d34ek.dtb \
 	sama5d35ek.dtb \
 	sama5d36ek.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
 	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
 dtb-$(CONFIG_ARCH_ATLAS6) += \
 	atlas6-evb.dtb
 dtb-$(CONFIG_ARCH_ATLAS7) += \
@@ -58,7 +62,11 @@ dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-b-plus.dtb
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2836-rpi-2-b.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
@@ -72,7 +80,12 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47081-buffalo-wzr-900dhp.dtb \
 	bcm4709-asus-rt-ac87u.dtb \
 	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-netgear-r8000.dtb
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012k.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += \
 	bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
@@ -83,6 +96,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
 	bcm28155-ap.dtb \
 	bcm21664-garnet.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958625k.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb \
 	berlin2cd-google-chromecast.dtb \
@@ -115,6 +130,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5250-snow-rev5.dtb \
 	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
 	exynos5410-smdk5410.dtb \
@@ -123,6 +139,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5420-smdk5420.dtb \
 	exynos5422-odroidxu3.dtb \
 	exynos5422-odroidxu3-lite.dtb \
+	exynos5422-odroidxu4.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb \
 	exynos5800-peach-pi.dtb
@@ -143,7 +160,8 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
 	k2hk-evm.dtb \
 	k2l-evm.dtb \
-	k2e-evm.dtb
+	k2e-evm.dtb \
+	keystone-k2g-evm.dtb
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
@@ -176,9 +194,12 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
 	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
 	kirkwood-lschlv2.dtb \
-	kirkwood-lswvl.dtb \
-	kirkwood-lswxl.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
 	kirkwood-mv88f6281gtw-ge.dtb \
@@ -193,12 +214,14 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
 	kirkwood-nsa310a.dtb \
+	kirkwood-nsa325.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
 	kirkwood-openrd-base.dtb \
 	kirkwood-openrd-client.dtb \
 	kirkwood-openrd-ultimate.dtb \
 	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
 	kirkwood-rd88f6192.dtb \
 	kirkwood-rd88f6281-z0.dtb \
 	kirkwood-rd88f6281-a.dtb \
@@ -227,6 +250,9 @@ dtb-$(CONFIG_ARCH_MMP) += \
 	pxa168-aspenite.dtb \
 	pxa910-dkb.dtb \
 	mmp2-brownstone.dtb
+dtb-$(CONFIG_MACH_MESON8B) += \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb
 dtb-$(CONFIG_ARCH_MOXART) += \
 	moxart-uc7112lx.dtb
 dtb-$(CONFIG_SOC_IMX1) += \
@@ -258,7 +284,8 @@ dtb-$(CONFIG_SOC_IMX51) += \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
 	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-ts4800.dtb
 dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-ard.dtb \
 	imx53-m53evk.dtb \
@@ -284,6 +311,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-pbab01.dtb \
 	imx6dl-rex-basic.dtb \
@@ -297,12 +325,17 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-udoo.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
+	imx6q-apalis-ixora.dtb \
 	imx6q-apf6dev.dtb \
 	imx6q-arm2.dtb \
+	imx6q-b450v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b850v3.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
 	imx6q-dfi-fs700-m60.dtb \
 	imx6q-dmo-edmqmx6.dtb \
+	imx6q-evi.dtb \
 	imx6q-gk802.dtb \
 	imx6q-gw51xx.dtb \
 	imx6q-gw52xx.dtb \
@@ -312,7 +345,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-icore-rqs.dtb \
 	imx6q-nitrogen6x.dtb \
+	imx6q-nitrogen6_max.dtb \
+	imx6q-novena.dtb \
 	imx6q-phytec-pbab01.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
@@ -327,7 +363,9 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-tx6q-1110.dtb \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb
+	imx6q-wandboard-revb1.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-warp.dtb
@@ -338,6 +376,8 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
+	imx7d-cl-som-imx7.dtb \
+	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
@@ -347,6 +387,7 @@ dtb-$(CONFIG_SOC_VF610) += \
 	vf610-colibri-eval-v3.dtb \
 	vf610m4-colibri.dtb \
 	vf610-cosmic.dtb \
+	vf610m4-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
 	imx23-evk.dtb \
@@ -435,24 +476,30 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-sbc-t3517.dtb \
 	omap3-sbc-t3530.dtb \
 	omap3-sbc-t3730.dtb \
+	omap3-sniper.dtb \
 	omap3-thunder.dtb \
 	omap3-zoom3.dtb
 dtb-$(CONFIG_SOC_TI81XX) += \
 	dm8148-evm.dtb \
 	dm8148-t410.dtb \
-	dm8168-evm.dtb
+	dm8168-evm.dtb \
+	dra62x-j5eco-evm.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-baltos-ir5221.dtb \
 	am335x-base0033.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
-	am335x-sl50.dtb \
+	am335x-bonegreen.dtb \
+	am335x-chiliboard.dtb \
+	am335x-cm-t335.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
+	am335x-lxm.dtb \
 	am335x-nano.dtb \
 	am335x-pepper.dtb \
-	am335x-lxm.dtb \
-	am335x-chiliboard.dtb \
+	am335x-shc.dtb \
+	am335x-sbc-t335.dtb \
+	am335x-sl50.dtb \
 	am335x-wega-rdk.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-duovero-parlor.dtb \
@@ -465,20 +512,26 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-var-stk-om44.dtb
 dtb-$(CONFIG_SOC_AM43XX) += \
 	am43x-epos-evm.dtb \
-	am437x-sk-evm.dtb \
+	am437x-cm-t43.dtb \
+	am437x-gp-evm.dtb \
 	am437x-idk-evm.dtb \
-	am437x-gp-evm.dtb
+	am437x-sbc-t43.dtb \
+	am437x-sk-evm.dtb
 dtb-$(CONFIG_SOC_OMAP5) += \
 	omap5-cm-t54.dtb \
+	omap5-igep0050.dtb \
 	omap5-sbc-t54.dtb \
 	omap5-uevm.dtb
 dtb-$(CONFIG_SOC_DRA7XX) += \
-	dra7-evm.dtb \
 	am57xx-beagle-x15.dtb \
+	am57xx-cl-som-am57x.dtb \
+	am57xx-sbc-am57x.dtb \
+	dra7-evm.dtb \
 	dra72-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-lacie-d2-network.dtb \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
 	orion5x-linkstation-lswtgl.dtb \
 	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
@@ -488,6 +541,8 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-sony-xperia-yuga.dtb \
+	qcom-apq8064-asus-nexus7-flo.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
@@ -496,18 +551,27 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk3036-evb.dtb \
+	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
 	rk3066a-rayeager.dtb \
 	rk3188-radxarock.dtb \
+	rk3228-evb.dtb \
 	rk3288-evb-act8846.dtb \
 	rk3288-evb-rk808.dtb \
 	rk3288-firefly-beta.dtb \
 	rk3288-firefly.dtb \
+	rk3288-popmetal.dtb \
 	rk3288-r89.dtb \
+	rk3288-rock2-square.dtb \
+	rk3288-veyron-brain.dtb \
+	rk3288-veyron-jaq.dtb \
 	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
 	rk3288-veyron-minnie.dtb \
 	rk3288-veyron-pinky.dtb \
 	rk3288-veyron-speedy.dtb
@@ -522,9 +586,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7778-bockw.dtb \
-	r8a7778-bockw-reference.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	emev2-kzm9d.dtb \
 	r7s72100-genmai.dtb \
@@ -533,8 +594,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	r8a7778-bockw.dtb \
 	r8a7779-marzen.dtb \
 	r8a7790-lager.dtb \
-	r8a7791-henninger.dtb \
 	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
@@ -542,6 +603,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_de0_sockit.dtb \
 	socfpga_cyclone5_sockit.dtb \
@@ -568,6 +630,7 @@ dtb-$(CONFIG_ARCH_STI) += \
 	stih418-b2199.dtb
 dtb-$(CONFIG_ARCH_STM32)+= \
 	stm32f429-disco.dtb \
+	stm32f469-disco.dtb \
 	stm32429i-eval.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
@@ -577,7 +640,9 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-gemei-g9.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
 	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
 	sun4i-a10-itead-iteaduino-plus.dtb \
 	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
@@ -585,16 +650,24 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-mk802.dtb \
 	sun4i-a10-mk802ii.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
 	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-utoo-p66.dtb
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
@@ -602,16 +675,24 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-i7.dtb \
 	sun6i-a31-m9.dtb \
 	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-cs908.dtb
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
 	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
 	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
@@ -619,18 +700,27 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-orangepi-mini.dtb \
 	sun7i-a20-pcduino3.dtb \
 	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
 	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-q8-tablet.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
 	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_ARCH_TANGO) += \
+	tango4-vantage-1172.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -670,9 +760,13 @@ dtb-$(CONFIG_ARCH_U8500) += \
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ph1-ld4-ref.dtb \
 	uniphier-ph1-ld6b-ref.dtb \
+	uniphier-ph1-pro4-ace.dtb \
 	uniphier-ph1-pro4-ref.dtb \
+	uniphier-ph1-pro4-sanji.dtb \
 	uniphier-ph1-sld3-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb 
+	uniphier-ph1-sld8-ref.dtb \
+	uniphier-proxstream2-gentil.dtb \
+	uniphier-proxstream2-vodka.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
@@ -702,6 +796,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
 	armada-370-netgear-rn102.dtb \
 	armada-370-netgear-rn104.dtb \
 	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
 	armada-370-synology-ds213j.dtb
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
@@ -709,6 +807,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
+	armada-388-clearfog.dtb \
 	armada-388-db.dtb \
 	armada-388-gp.dtb \
 	armada-388-rd.dtb
@@ -732,9 +831,11 @@ dtb-$(CONFIG_MACH_DOVE) += \
 	dove-dove-db.dtb \
 	dove-sbc-a510.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
 	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
+	mt7623-evb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index 9af2d60e9a7f..db8752fc480e 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -155,6 +155,16 @@
 			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
 
 			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <96>;
+			al,msi-num-spis = <64>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 7d36601697da..4e28d87e9356 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -56,175 +56,171 @@
 &am33xx_pinmux {
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
-			0x024 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
-			0x028 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
-			0x02c (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
-			0x080 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
-			0x084 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
-			0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
+			AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
 		>;
 	};
 
 	tps65910_pins: pinmux_tps65910_pins {
 		pinctrl-single,pins = <
-			0x078 (PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
 		>;
 	};
 
 	tca6416_pins: pinmux_tca6416_pins {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+			AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x158 0x2a      /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
-			0x15c 0x2a      /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
 		>;
 	};
 
 	dcan1_pins: pinmux_dcan1_pins {
 		pinctrl-single,pins = <
-			0x168 0x0a      /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
-			0x16c 0x2a      /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x180 0x28      /* uart1_rxd, INPUT | MODE0 */
-			0x184 0x28      /* uart1_txd, INPUT | MODE0 */
-			/*0x178 0x28*/      /* uart1_ctsn, INPUT | MODE0 */
-			/*0x17c 0x08*/      /* uart1_rtsn, OUTPUT | MODE0 */
-			0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
-			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
-			0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)      /* uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0)      /* uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x150 0x29      /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
-			0x154 0x09      /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
-			/*0x188 0x2a*/      /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
-			/*0x18c 0x2a*/      /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
-			0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
-			0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
 
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nandflash_pins_s0: nandflash_pins_s0 {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 };
@@ -240,7 +236,11 @@
 	status = "okay";
 
 	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		ti,nand-xfer-type = "polled";
@@ -261,12 +261,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
@@ -473,9 +470,12 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
 };
 
 &cpsw_emac1 {
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index 72a9b3fc4251..58a05f7d0b7c 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -46,39 +46,39 @@
 &am33xx_pinmux {
 	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
 		>;
 	};
 	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
 		>;
 	};
 
 	leds_base_pins: pinmux_leds_base_pins {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index fec78349c1f3..0cc150b87b86 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -67,112 +67,112 @@
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 };
@@ -383,8 +383,7 @@
 	bus-width = <0x4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &aes {
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index eadbba32386d..55c0e954b146 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -36,32 +36,32 @@
 &am33xx_pinmux {
 	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
 		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
 		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
new file mode 100644
index 000000000000..dce3c8657e04
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Green";
+	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)	/* spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)	/* spi0_d0.uart2_txd */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 310da20a8aa7..15d47ab28865 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -37,26 +37,26 @@
 &am33xx_pinmux {
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+			AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
 		>;
 	};
 
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	led_gpio_pins: led_gpio_pins {
 		pinctrl-single,pins = <
-			0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
-			0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+			AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+			AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 7e9a34dffe21..95461a28bc98 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -7,6 +7,7 @@
  * published by the Free Software Foundation.
  */
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Grinn AM335x ChiliSOM";
@@ -29,81 +30,81 @@
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* mdio_data.mdio_data */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
 			/* mdio_clk.mdio_clk */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nandflash_pins: nandflash_pins {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 };
@@ -208,7 +209,11 @@
 	pinctrl-0 = <&nandflash_pins>;
 	ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -227,12 +232,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 	};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
new file mode 100644
index 000000000000..e835644c5054
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -0,0 +1,568 @@
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "CompuLab CM-T335";
+	compatible = "compulab,cm-t335", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;	/* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+		led@0 {
+			label = "cm_t335:green";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* regulator for mmc */
+	vmmc_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* Regulator for WiFi */
+	vwlan_fixed: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+		enable-active-high;
+		regulator-boot-off;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "cm-t335";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,routing =
+			"Headphone Jack", "LHPOUT",
+			"Headphone Jack", "RHPOUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic Jack";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bluetooth_pins>;
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			/* uart0_ctsn.i2c1_sda */
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
+			/* uart0_rtsn.i2c1_scl */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			/* gpmc_csn3.gpio2_0 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
+			/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			/* gpmc_ben0_cle.gpmc_ben0_cle */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
+			/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			/* uart1_ctsn.dcan0_tx */
+			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)
+			/* uart1_rtsn.dcan0_rx */
+			AM33XX_IOPAD(0x97C, PIN_INPUT | MUX_MODE2)
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd.dcan1_tx */
+			AM33XX_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)
+			/* uart1_txd.dcan1_rx */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE2)
+		>;
+	};
+
+	ecap0_pins: pinmux_ecap0_pins {
+		pinctrl-single,pins = <
+			/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM33XX_IOPAD(0x964, 0x0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			/* mii1_tx_en.rgmii1_tctl */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
+			/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			/* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE0)
+			/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE0)
+			/* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0)
+			/* spi0_cs1.spi0_cs1 */
+			AM33XX_IOPAD(0x960, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	/* wl1271 bluetooth */
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	/* TLV320AIC23B codec */
+	mcasp1_pins: pinmux_mcasp1_pins {
+		pinctrl-single,pins = <
+			/* MII1_CRS.mcasp1_aclkx */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)
+			/* MII1_RX_ER.mcasp1_fsx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)
+			/* MII1_COL.mcasp1_axr2 */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE4)
+			/* RMII1_REF_CLK.mcasp1_axr3 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)
+		>;
+	};
+
+	/* wl1271 WiFi */
+	wifi_pins: pinmux_wifi_pins {
+		pinctrl-single,pins = <
+			/* EMU1.gpio3_8 - WiFi IRQ */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)
+			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+	/* CM-T335 board EEPROM */
+	eeprom: 24c02@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+	/* Real Time Clock */
+	ext_rtc: em3027@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+	/* Audio codec */
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@48300100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "spl";
+			reg = <0x00000000 0x00200000>;
+		};
+		partition@1 {
+			label = "uboot";
+			reg = <0x00200000 0x00100000>;
+		};
+		partition@2 {
+			label = "uboot environment";
+			reg = <0x00300000 0x00100000>;
+		};
+		partition@3 {
+			label = "dtb";
+			reg = <0x00400000 0x00100000>;
+		};
+		partition@4 {
+			label = "splash";
+			reg = <0x00500000 0x00400000>;
+		};
+		partition@5 {
+			label = "linux";
+			reg = <0x00900000 0x00600000>;
+		};
+		partition@6 {
+			label = "rootfs";
+			reg = <0x00F00000 0>;
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	slaves = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+};
+
+/* Touschscreen and analog digital converter */
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x01 0x10 0x23 0x32>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+/* CPU audio */
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 16 serializers */
+		num-serializer = <16>;
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+
+		#sound-dai-cells= <0>;
+		status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	ti,pindir-d0-out-d1-in = <1>;
+	/* WLS1271 WiFi */
+	wlcore: wlcore@1 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins>;
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 1942a5c8132d..28b916210271 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -83,14 +83,14 @@
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch@10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -168,215 +168,215 @@
 
 	matrix_keypad_s0: matrix_keypad_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 
 	volume_keys_s0: volume_keys_s0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	nandflash_pins_s0: nandflash_pins_s0 {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM33XX_IOPAD(0x964, MUX_MODE0)	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mmc3_pins: pinmux_mmc3_pins {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
-			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
-			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
 		>;
 	};
 
 	wlan_pins: pinmux_wlan_pins {
 		pinctrl-single,pins = <
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
-			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x99c, PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
+			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
 		>;
 	};
 
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 		>;
 	};
 };
@@ -519,7 +519,11 @@
 	pinctrl-0 = <&nandflash_pins_s0>;
 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -538,12 +542,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -737,14 +738,14 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
@@ -766,11 +767,6 @@
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-					    2 13>;
-};
-
 &sham {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 315bb02c9920..282fe1b37095 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -123,7 +123,7 @@
 			label = "button2";
 			linux,code = <0x102>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		switch@4 {
@@ -204,234 +204,234 @@
 
 	lcd_pins_default: lcd_pins_default {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 	lcd_pins_sleep: lcd_pins_sleep {
 		pinctrl-single,pins = <
-			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 		>;
 	};
 
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+			AM33XX_IOPAD(0x810, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			AM33XX_IOPAD(0x814, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			AM33XX_IOPAD(0x818, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			AM33XX_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
 		>;
 	};
 
 	gpio_keys_s0: gpio_keys_s0 {
 		pinctrl-single,pins = <
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+			AM33XX_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			AM33XX_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	ecap2_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+			AM33XX_IOPAD(0x99c, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 		>;
 	};
 };
@@ -647,7 +647,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &sham {
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index c0e1135256cc..6c3a9bf3638a 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -11,6 +11,7 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	cpus {
@@ -56,41 +57,41 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	nandflash_pins: pinmux_nandflash_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
 		>;
 	};
 };
@@ -129,7 +130,11 @@
 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-width = <1>;
@@ -147,12 +152,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 5c5667a3624d..d97b0efa43f3 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -46,109 +46,109 @@
 &am33xx_pinmux {
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
+			AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
+			AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 5ed4ca6eaf55..f313999c503e 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -41,121 +41,121 @@
 
 	misc_pins: misc_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
 		>;
 	};
 
 	gpmc_pins: gpmc_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
+
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
+			AM33XX_IOPAD(0x884, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
+			AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
+
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
+
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	uart0_pins: uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
 		>;
 	};
 
 	uart2_pins: uart2_pins {
 		pinctrl-single,pins = <
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+			AM33XX_IOPAD(0x8c0, PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+			AM33XX_IOPAD(0x8c8, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			AM33XX_IOPAD(0x964, PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
 		>;
 	};
 
 	uart4_pins: uart4_pins {
 		pinctrl-single,pins = <
-			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+			AM33XX_IOPAD(0x8d0, PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
 		>;
 	};
 
 	uart5_pins: uart5_pins {
 		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+			AM33XX_IOPAD(0x8d8, PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			AM33XX_IOPAD(0x944, PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
 		>;
 	};
 
 	mmc1_pins: mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 7106114c7464..8867aaaec54d 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -93,14 +93,14 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 	i2c1_pins: pinmux_i2c1 {
 		pinctrl-single,pins = <
-			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
+			AM33XX_IOPAD(0x90C, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
 		>;
 	};
 };
@@ -130,7 +130,7 @@
 &am33xx_pinmux {
 	accel_pins: pinmux_accel {
 		pinctrl-single,pins = <
-			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+			AM33XX_IOPAD(0x898, PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
 		>;
 	};
 };
@@ -177,12 +177,12 @@
 &am33xx_pinmux {
 	audio_pins: pinmux_audio {
 		pinctrl-single,pins = <
-			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
 		>;
 	};
 };
@@ -228,36 +228,36 @@
 &am33xx_pinmux {
 	lcd_pins: pinmux_lcd {
 		pinctrl-single,pins = <
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
 			/* Display Enable */
-			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 };
@@ -291,29 +291,29 @@
 &am33xx_pinmux {
 	ethernet_pins: pinmux_ethernet {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
 			/* ethernet interrupt */
-			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
 			/* ethernet PHY nReset */
-			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
+			AM33XX_IOPAD(0x908, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
 		>;
 	};
 
 	mdio_pins: pinmux_mdio {
 		pinctrl-single,pins = <
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 };
@@ -339,13 +339,6 @@
 	ti,non-removable;
 };
 
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
-};
-
-
 &mmc3 {
 	/* Wifi & Bluetooth on MMC #3 */
 	status = "okay";
@@ -354,8 +347,8 @@
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
 	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 };
 
@@ -363,45 +356,45 @@
 &am33xx_pinmux {
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
 		>;
 	};
 	emmc_pins: pinmux_emmc {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
 			/* EMMC nReset */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
 		>;
 	};
 	wireless_pins: pinmux_wireless {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
+			AM33XX_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
+			AM33XX_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
+			AM33XX_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
 			/* WLAN nReset */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 			/* WLAN nPower down */
-			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_IOPAD(0x870, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
 			/* 32kHz Clock */
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 };
@@ -497,10 +490,10 @@
 &am33xx_pinmux {
 	spi0_pins: pinmux_spi0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM33XX_IOPAD(0x95C, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
 		>;
 	};
 };
@@ -538,16 +531,16 @@
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
 		>;
 	};
 	uart1_pins: pinmux_uart1 {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
 		>;
 	};
 };
@@ -590,9 +583,9 @@
 	usb_pins: pinmux_usb {
 		pinctrl-single,pins = <
 			/* USB0 Over-Current (active low) */
-			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
 			/* USB1 Over-Current (active low) */
-			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
 		>;
 	};
 };
@@ -627,37 +620,37 @@
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 
 	button@1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 
 	buttons@2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 };
 
 &am33xx_pinmux {
 	user_leds_pins: pinmux_user_leds {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 		>;
 	};
 
 	user_buttons_pins: pinmux_user_buttons {
 		pinctrl-single,pins = <
-			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85C, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
+			AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 5dd084f3c81c..d4b7f3bd553f 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -8,6 +8,7 @@
  */
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Phytec AM335x phyCORE";
@@ -29,8 +30,17 @@
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
+	regulators {
+		compatible = "simple-bus";
+
+		vcc5v: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
 	};
 };
 
@@ -47,22 +57,22 @@
 &am33xx_pinmux {
 	ethernet0_pins: pinmux_ethernet0 {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			0x114 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
-			0x124 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1)		/* mii1_txen.rmii1_txen */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd1.rmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1)		/* mii1_txd0.rmii1_txd0 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
 		>;
 	};
 
 	mdio_pins: pinmux_mdio {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 };
@@ -94,8 +104,8 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 };
@@ -128,20 +138,20 @@
 &am33xx_pinmux {
 		nandflash_pins: pinmux_nandflash {
 			pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 };
@@ -156,7 +166,11 @@
 	pinctrl-0 = <&nandflash_pins>;
 	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
 	nandflash: nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-nand = "true";
@@ -175,13 +189,10 @@
 		gpmc,access-ns = <30>;
 		gpmc,rd-cycle-ns = <30>;
 		gpmc,wr-cycle-ns = <30>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <50>;
 		gpmc,cycle2cycle-diffcsen;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <30>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
@@ -233,14 +244,14 @@
 #include "tps65910.dtsi"
 
 &tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
 
 	regulators {
 		vrtc_reg: regulator@0 {
@@ -311,21 +322,14 @@
 	};
 };
 
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-	regulator-boot-on;
-};
-
 /* SPI Busses */
 &am33xx_pinmux {
 	spi0_pins: pinmux_spi0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_clk.spi0_clk */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* spi0_d0.spi0_d0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_d1.spi0_d1 */
+			AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0)	/* spi0_cs0.spi0_cs0 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
new file mode 100644
index 000000000000..917d7ccc9109
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -0,0 +1,219 @@
+/*
+ * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-cm-t335.dts"
+
+/ {
+	model = "CompuLab CM-T335 on SB-T335";
+	compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
+
+	/* DRM display driver */
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			/* Timing selection performed by U-Boot */
+			timing0: lcd {/* 800x480p62 */
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+			timing1: dvi { /* 1024x768p60 */
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				hfront-porch = <24>;
+				hback-porch = <160>;
+				hsync-len = <136>;
+				vactive = <768>;
+				vfront-porch = <3>;
+				vback-porch = <29>;
+				vsync-len = <6>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	/* Display */
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)
+			/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: lcd_pins_sleep {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x828, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x82c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | MUX_MODE7)
+			/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | MUX_MODE7)
+			/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	/* GPIO extender */
+	gpio_ext: pca9555@26 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x26>;
+		dvi_ena {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "dvi-enable";
+		};
+		lcd_ena {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "lcd-enable";
+		};
+	};
+};
+
+/* Display */
+&lcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
new file mode 100644
index 000000000000..865de8500f1c
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -0,0 +1,577 @@
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Bosch SHC";
+	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		mmcblk0 = &mmc1;
+		mmcblk1 = &mmc2;
+	};
+
+	cpus {
+		cpu@0 {
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				594000  1225000
+				294000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		back_button {
+			label = "Back Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+
+		front_button {
+			label = "Front Button";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_FRONT>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "shc:power:red";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "shc:power:bl";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		led@3 {
+			label = "shc:lan:red";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "shc:lan:bl";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "shc:cloud:red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@6 {
+			label = "shc:cloud:bl";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
+	};
+};
+
+&epwmss1 {
+	status = "okay";
+
+	ehrpwm1: ehrpwm@48302200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm1_pins>;
+		status = "okay";
+	};
+};
+
+&gpio1 {
+	hmtc_rst {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_reset";
+	};
+
+	hmtc_prog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_program";
+	};
+};
+
+&gpio3 {
+	zgb_rst {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "zigbee_reset";
+	};
+
+	zgb_boot {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "zigbee_boot";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	at24@50 {
+		compatible = "at24,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+	slaves = <1>;
+	cpsw_emac0: slave@4a100200  {
+		phy_id = <&davinci_mdio>, <0>;
+		phy-mode = "mii";
+		phy-handle = <&ethernetphy0>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	max-frequency = <26000000>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	bus-width = <4>;
+	cap-power-off-card;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	ti,no-init;
+};
+
+&sham {
+	status = "okay";
+};
+
+&tps {
+	compatible = "ti,tps65217";
+	ti,pmic-shutdown-controller;
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-name = "vdds_dpr";
+			regulator-compatible = "dcdc1";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			/*
+			 * VDD_MPU voltage limits 0.95V - 1.26V with
+			 * +/-4% tolerance
+			 */
+			regulator-compatible = "dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1375000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <70000>;
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			/*
+			 * VDD_CORE voltage limits 0.95V - 1.1V with
+			 * +/-4% tolerance
+			 */
+			regulator-name = "vdd_core";
+			regulator-compatible = "dcdc3";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-name = "vio,vrtc,vdds";
+			regulator-compatible = "ldo1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-name = "vdd_3v3aux";
+			regulator-compatible = "ldo2";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-name = "vdd_1v8";
+			regulator-compatible = "ldo3";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-name = "vdd_3v3a";
+			regulator-compatible = "ldo4";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_INPUT | MUX_MODE6)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.gpio1_19 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x880, PIN_INPUT | MUX_MODE2)
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE5)
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x830, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x834, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x838, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x83c, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x888, PIN_INPUT | MUX_MODE3)
+			AM33XX_IOPAD(0x88c, PIN_INPUT | MUX_MODE3)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x96c, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x974, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			AM33XX_IOPAD(0x97C, PIN_OUTPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0)
+			AM33XX_IOPAD(0x984, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1)
+			AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE6)
+		>;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x844, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x86c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x878, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x87c, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x894, PIN_INPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x958, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE7)
+			AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM33XX_IOPAD(0x9a0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 3303c281697b..a6efbe6eda3b 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -19,6 +19,10 @@
 		};
 	};
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -63,12 +67,28 @@
 		default-brightness-level = <6>;
 	};
 
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* audio external oscillator */
+		tlv320aic3x_mclk: oscillator@0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;	/* 24.576MHz */
+		};
+	};
+
 	sound {
 		compatible = "ti,da830-evm-audio";
 		ti,model = "AM335x-SL50";
 		ti,audio-codec = <&audio_codec>;
 		ti,mcasp-controller = <&mcasp0>;
-		ti,codec-clock-rate = <12000000>;
+
+		clocks = <&tlv320aic3x_mclk>;
+		clock-names = "mclk";
+
 		ti,audio-routing =
 			"Headphone Jack",	"HPLOUT",
 			"Headphone Jack",	"HPROUT",
@@ -226,7 +246,7 @@
 			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
 			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
 			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 5e541bd1b45a..282f6d4b27bc 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -11,14 +11,25 @@
 	model = "Phytec AM335x phyBOARD-WEGA";
 	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
 
+	regulators {
+		compatible = "simple-bus";
+
+		vcc3v3: fixedregulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vcc3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+		};
+	};
 };
 
 /* CAN Busses */
 &am33xx_pinmux {
 	dcan1_pins: pinmux_dcan1 {
 		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 		>;
 	};
 };
@@ -33,20 +44,20 @@
 &am33xx_pinmux {
 	ethernet1_pins: pinmux_ethernet1 {
 		pinctrl-single,pins = <
-			0x40 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
-			0x48 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
-			0x4c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
-			0x50 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
-			0x54 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
+			AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_IOPAD(0x874, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* gpmc_ben1.mii2_col */
 		>;
 	};
 };
@@ -68,19 +79,19 @@
 &am33xx_pinmux {
 	mmc1_pins: pinmux_mmc1 {
 		pinctrl-single,pins = <
-			0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0x0FC (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
 		>;
 	};
 };
 
 &mmc1 {
-	vmmc-supply = <&vmmc_reg>;
+	vmmc-supply = <&vcc3v3>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
@@ -92,17 +103,17 @@
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart1_rtsn.uart1_rtsn */
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d23e2524d694..55ca9c7dcf6a 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -161,6 +161,14 @@
 					mboxes = <&mailbox &mbox_wkupm3>;
 				};
 
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
 				scm_clockdomains: clockdomains {
 				};
 			};
@@ -174,12 +182,44 @@
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = <20 21>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <112>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <113>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <114>;
+			interrupt-names = "edma3_tcerrint";
 		};
 
 		gpio0: gpio@44e07000 {
@@ -233,7 +273,7 @@
 			reg = <0x44e09000 0x2000>;
 			interrupts = <72>;
 			status = "disabled";
-			dmas = <&edma 26>, <&edma 27>;
+			dmas = <&edma 26 0>, <&edma 27 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -244,7 +284,7 @@
 			reg = <0x48022000 0x2000>;
 			interrupts = <73>;
 			status = "disabled";
-			dmas = <&edma 28>, <&edma 29>;
+			dmas = <&edma 28 0>, <&edma 29 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -255,7 +295,7 @@
 			reg = <0x48024000 0x2000>;
 			interrupts = <74>;
 			status = "disabled";
-			dmas = <&edma 30>, <&edma 31>;
+			dmas = <&edma 30 0>, <&edma 31 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -322,8 +362,8 @@
 			ti,dual-volt;
 			ti,needs-special-reset;
 			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma_xbar 24 0 0
+				&edma_xbar 25 0 0>;
 			dma-names = "tx", "rx";
 			interrupts = <64>;
 			interrupt-parent = <&intc>;
@@ -335,8 +375,8 @@
 			compatible = "ti,omap4-hsmmc";
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0
+				&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <28>;
 			interrupt-parent = <&intc>;
@@ -399,6 +439,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};
@@ -474,10 +515,10 @@
 			interrupts = <65>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
+			dmas = <&edma 16 0
+				&edma 17 0
+				&edma 18 0
+				&edma 19 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -490,10 +531,10 @@
 			interrupts = <125>;
 			ti,spi-num-cs = <2>;
 			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
+			dmas = <&edma 42 0
+				&edma 43 0
+				&edma 44 0
+				&edma 45 0>;
 			dma-names = "tx0", "rx0", "tx1", "rx1";
 			status = "disabled";
 		};
@@ -819,10 +860,14 @@
 			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
+			dmas = <&edma 52>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <7>;
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			status = "disabled";
 		};
 
@@ -831,7 +876,7 @@
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x200>;
 			interrupts = <109>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 		};
 
@@ -840,8 +885,8 @@
 			ti,hwmods = "aes";
 			reg = <0x53500000 0xa0>;
 			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
+			dmas = <&edma 6 0>,
+			       <&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -854,8 +899,8 @@
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
+			dmas = <&edma 8 2>,
+				<&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -868,8 +913,8 @@
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
+			dmas = <&edma 10 2>,
+				<&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index 2d40b3f241cd..cb7de1d4e05f 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -77,7 +77,7 @@
 &omap3_pmx_core {
 	tps_pins: pinmux_tps_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d83ff9c9701e..344b861a55a5 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -30,6 +30,7 @@
 		serial5 = &uart5;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		spi0 = &qspi;
 	};
 
 	cpus {
@@ -72,17 +73,17 @@
 	global_timer: timer@48240200 {
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0x48240200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
-		clocks = <&dpll_mpu_m2_ck>;
+		clocks = <&mpu_periphclk>;
 	};
 
 	local_timer: timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x100>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
-		clocks = <&dpll_mpu_m2_ck>;
+		clocks = <&mpu_periphclk>;
 	};
 
 	l2-cache-controller@48242000 {
@@ -171,6 +172,14 @@
 					mboxes = <&mailbox &mbox_wkupm3>;
 				};
 
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <64>;
+					dma-masters = <&edma>;
+				};
+
 				scm_clockdomains: clockdomains {
 				};
 			};
@@ -183,14 +192,46 @@
 		};
 
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 0>;
+
+			ti,edma-memcpy-channels = <58 59>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma3_tcerrint";
 		};
 
 		uart0: serial@44e09000 {
@@ -249,6 +290,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};
@@ -495,8 +537,8 @@
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
+			dmas = <&edma 24 0>,
+				<&edma 25 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -507,8 +549,8 @@
 			reg = <0x481d8000 0x1000>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
+			dmas = <&edma 2 0>,
+				<&edma 3 0>;
 			dma-names = "tx", "rx";
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -776,7 +818,7 @@
 			compatible = "ti,omap5-sham";
 			ti,hwmods = "sham";
 			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
+			dmas = <&edma 36 0>;
 			dma-names = "rx";
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -786,8 +828,8 @@
 			ti,hwmods = "aes";
 			reg = <0x53501000 0xa0>;
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
+			dmas = <&edma 6 0>,
+				<&edma 5 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -796,8 +838,8 @@
 			ti,hwmods = "des";
 			reg = <0x53701000 0xa0>;
 			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
+			dmas = <&edma 34 0>,
+				<&edma 33 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -810,8 +852,8 @@
 			interrupts = <80>, <81>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
+			dmas = <&edma 8 2>,
+			       <&edma 9 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -824,8 +866,8 @@
 			interrupts = <82>, <83>;
 			interrupt-names = "tx", "rx";
 			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
+			dmas = <&edma 10 2>,
+			       <&edma 11 2>;
 			dma-names = "tx", "rx";
 		};
 
@@ -842,6 +884,8 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
+			dmas = <&edma 52>;
+			dma-names = "rxtx";
 			clocks = <&l3s_gclk>;
 			clock-names = "fck";
 			reg = <0x50000000 0x2000>;
@@ -850,21 +894,11 @@
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			status = "disabled";
 		};
 
-		am43xx_control_usb2phy1: control-phy@44e10620 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10620 0x4>;
-			reg-names = "power";
-		};
-
-		am43xx_control_usb2phy2: control-phy@0x44e10628 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10628 0x4>;
-			reg-names = "power";
-		};
-
 		ocp2scp0: ocp2scp@483a8000 {
 			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
 			#address-cells = <1>;
@@ -875,7 +909,7 @@
 			usb2_phy1: phy@483a8000 {
 				compatible = "ti,am437x-usb2";
 				reg = <0x483a8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy1>;
+				syscon-phy-power = <&scm_conf 0x620>;
 				clocks = <&usb_phy0_always_on_clk32k>,
 					 <&usb_otg_ss0_refclk960m>;
 				clock-names = "wkupclk", "refclk";
@@ -894,7 +928,7 @@
 			usb2_phy2: phy@483e8000 {
 				compatible = "ti,am437x-usb2";
 				reg = <0x483e8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy2>;
+				syscon-phy-power = <&scm_conf 0x628>;
 				clocks = <&usb_phy1_always_on_clk32k>,
 					 <&usb_otg_ss1_refclk960m>;
 				clock-names = "wkupclk", "refclk";
@@ -963,7 +997,9 @@
 
 		qspi: qspi@47900000 {
 			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>;
+			reg = <0x47900000 0x100>,
+			      <0x30000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "qspi";
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
new file mode 100644
index 000000000000..9551c4713173
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -0,0 +1,421 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+	model = "CompuLab CM-T43";
+	compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ledb {
+			label = "cm-t43:green";
+			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vmmc_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cm_t43_led_pins>;
+
+	cm_t43_led_pins: cm_t43_led_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa78, MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	emmc_pins: emmc_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+			AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+			AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+			AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+			AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+			AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+			AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+			AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP  | MUX_MODE0)
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0xa74, MUX_MODE3)
+			/* Slave 2 */
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.txen */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a1.rxctl */
+			AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.txd3 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.txd2 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.txd1 */
+			AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.txd0 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.tclk */
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a7.rclk */
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a8.rxd3 */
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a9.rxd2 */
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a10.rxd1 */
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a11.rxd0 */
+			AM4372_IOPAD(0xa38, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x1000000>;
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MTD partition table */
+		partition@0 {
+			label = "kernel";
+			reg = <0x0 0x00980000>;
+		};
+		partition@980000 {
+			label = "dtb";
+			reg = <0x00980000 0x00080000>;
+		};
+		partition@a00000 {
+			label = "rootfs";
+			reg = <0x00a00000 0x0>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-suspend-enable;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	eeprom_module: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	dmas = <&edma 16
+		&edma 17>;
+	dma-names = "tx0", "rx0";
+
+	flash: w25q64cvzpig@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x100000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&dwc3_1 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&dwc3_2 {
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordiante-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+	operating-points = <1000000 1330000>,
+			   <800000 1260000>,
+			   <720000 1200000>,
+			   <600000 1100000>,
+			   <300000 950000>;
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 22038f21f228..8889be1ca1c3 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -154,138 +154,138 @@
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 		>;
 	};
 
 	pixcir_ts_pins: pixcir_ts_pins {
 		pinctrl-single,pins = <
-			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+			AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nand_flash_x8: nand_flash_x8 {
 		pinctrl-single,pins = <
-			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM4372_IOPAD(0x808, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM4372_IOPAD(0x810, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM4372_IOPAD(0x814, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM4372_IOPAD(0x818, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 
 		>;
 	};
@@ -293,194 +293,208 @@
 	display_mux_pins: display_mux_pins {
 		pinctrl-single,pins = <
 			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
 
 	dcan0_default: dcan0_default_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+			AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+
+	dcan0_sleep: dcan0_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
 		>;
 	};
 
 	dcan1_default: dcan1_default_pins {
 		pinctrl-single,pins = <
-			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
-			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+			AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+		>;
+	};
+
+	dcan1_sleep: dcan1_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
-			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
-			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
-			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
-			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
-			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
-			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_default: vpfe1_pins_default {
 		pinctrl-single,pins = <
-			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
-			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
-			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
-			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
-			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
-			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
-			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
-			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
-			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
-			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
-			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
-			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
-			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_sleep: vpfe1_pins_sleep {
 		pinctrl-single,pins = <
-			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
-			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
-			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
-			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
-			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
-			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
-			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
-			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
-			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
-			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
-			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
-			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
-			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	mmc3_pins_default: pinmux_mmc3_pins_default {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	wlan_pins_default: pinmux_wlan_pins_default {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	wlan_pins_sleep: pinmux_wlan_pins_sleep {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
-			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
-			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+			AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_sleep_pins: mcasp1_sleep_pins {
 		pinctrl-single,pins = <
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	gpio0_pins: gpio0_pins {
 		pinctrl-single,pins = <
-			0x26c (PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+			AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
 		>;
 	};
 
 	emmc_pins_default: emmc_pins_default {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 		>;
 	};
 
 	emmc_pins_sleep: emmc_pins_sleep {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
-			0x04 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
-			0x08 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
-			0x0c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
-			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
-			0x80 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
-			0x84 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
 		>;
 	};
 };
@@ -576,13 +590,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		/*
+		 * 0x264 represents the offset of padconf register of
+		 * gpio3_22 from am43xx_pinmux base.
+		 */
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tsc", "wakeup";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
+		wakeup-source;
 	};
 
 	ov2659@30 {
@@ -689,7 +710,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 /* eMMC sits on mmc2 */
@@ -711,8 +732,8 @@
 	status = "okay";
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 30
-		&edma 31>;
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
 	dma-names = "tx", "rx";
 	vmmc-supply = <&vmmcwl_fixed>;
 	bus-width = <4>;
@@ -733,11 +754,6 @@
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 30
-					    2 31>;
-};
-
 &uart3 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -794,9 +810,13 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -815,11 +835,9 @@
 		gpmc,access-ns = <30>;
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -886,14 +904,16 @@
 };
 
 &dcan0 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan0_default>;
+	pinctrl-1 = <&dcan0_sleep>;
 	status = "okay";
 };
 
 &dcan1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan1_default>;
+	pinctrl-1 = <&dcan1_sleep>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index af25801418b4..76dcfc6d5f0d 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -122,137 +122,137 @@
 &am43xx_pinmux {
 	gpio_keys_pins_default: gpio_keys_pins_default {
 		pinctrl-single,pins = <
-			0x1b8 (PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
 		>;
 	};
 
 	i2c0_pins_default: i2c0_pins_default {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c0_pins_sleep: i2c0_pins_sleep {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	i2c2_pins_default: i2c2_pins_default {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
-			0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
 		>;
 	};
 
 	i2c2_pins_sleep: i2c2_pins_sleep {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins_default: pinmux_mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	ecap0_pins_default: backlight_pins_default {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	qspi_pins_default: qspi_pins_default {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	qspi_pins_sleep: qspi_pins_sleep{
 		pinctrl-single,pins = <
-			0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 };
@@ -325,7 +325,7 @@
 	pinctrl-1 = <&mmc1_pins_sleep>;
 	vmmc-supply = <&v3_3d>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &qspi {
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
new file mode 100644
index 000000000000..5f750c0ed6c9
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am437x-cm-t43.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CM-T43 on SB-SOM-T43";
+	compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+};
+
+&am43xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
+		>;
+	};
+
+	dss_pinctrl_default: dss_pinctrl_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
+			AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
+
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	uart0_pins_default: uart0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_cs0.i2c1_sda  */
+			AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_sclk.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: i2c2_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_ctsn.i2c2_sda  */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	usb2_phy1_default: usb2_phy1_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	usb2_phy2_default: usb2_phy2_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom_base: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vsb_3v3>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pinctrl_default>;
+
+	port {
+		dpi_lcd_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+};
+
+&dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy1_default>;
+};
+
+&dwc3_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy2_default>;
+};
+
+&lcd0 {
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 28 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 0bb36e9af936..d82dd6e3f9b1 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -157,259 +157,259 @@
 &am43xx_pinmux {
 	matrix_keypad_pins: matrix_keypad_pins {
 		pinctrl-single,pins = <
-			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
 		>;
 	};
 
 	leds_pins: leds_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
 	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
-			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
-			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x12c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 
 			/* Slave 2 */
-			0x58 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT | MUX_MODE1)
-			0x028 (PIN_OUTPUT | MUX_MODE1)
-			0x02c (PIN_OUTPUT | MUX_MODE1)
-			0x030 (PIN_OUTPUT | MUX_MODE1)
-			0x034 (PIN_OUTPUT | MUX_MODE1)
-			0x038 (PIN_OUTPUT | MUX_MODE1)
-			0x03c (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)
-			0x0ac (PIN_OUTPUT | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)
-			0x0bc (PIN_OUTPUT | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)
-			0x0cc (PIN_OUTPUT | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)
-			0x0dc (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
+			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
 
 		>;
 	};
 
 	qspi_pins: qspi_pins {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
 	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	lcd_pins: lcd_pins {
 		pinctrl-single,pins = <
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 		>;
 	};
 
 	usb1_pins: usb1_pins {
 		pinctrl-single,pins = <
-			0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 
 	usb2_pins: usb2_pins {
 		pinctrl-single,pins = <
-			0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 };
@@ -563,7 +563,7 @@
 
 	vmmc-supply = <&dcdc4>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &usb2_phy1 {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 86c2dfbe8875..d5dd72047a7e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -18,7 +18,7 @@
 
 / {
 	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+	compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
 
 	aliases {
 		display0 = &lcd0;
@@ -144,228 +144,228 @@
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
 				/* Slave 1 */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
 			>;
 		};
 
 		cpsw_sleep: cpsw_sleep {
 			pinctrl-single,pins = <
 				/* Slave 1 reset value */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		davinci_mdio_default: davinci_mdio_default {
 			pinctrl-single,pins = <
 				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 			>;
 		};
 
 		davinci_mdio_sleep: davinci_mdio_sleep {
 			pinctrl-single,pins = <
 				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		i2c0_pins: pinmux_i2c0_pins {
 			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 			>;
 		};
 
 		nand_flash_x8: nand_flash_x8 {
 			pinctrl-single,pins = <
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 			>;
 		};
 
 		ecap0_pins: backlight_pins {
 			pinctrl-single,pins = <
-				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 			>;
 		};
 
 		i2c2_pins: pinmux_i2c2_pins {
 			pinctrl-single,pins = <
-				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
 			>;
 		};
 
 		spi0_pins: pinmux_spi0_pins {
 			pinctrl-single,pins = <
-				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
 			>;
 		};
 
 		spi1_pins: pinmux_spi1_pins {
 			pinctrl-single,pins = <
-				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
 			>;
 		};
 
 		mmc1_pins: pinmux_mmc1_pins {
 			pinctrl-single,pins = <
-				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 			>;
 		};
 
 		qspi1_default: qspi1_default {
 			pinctrl-single,pins = <
-				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
-				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
 			>;
 		};
 
 		pixcir_ts_pins: pixcir_ts_pins {
 			pinctrl-single,pins = <
-				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
 			>;
 		};
 
 		hdq_pins: pinmux_hdq_pins {
 			pinctrl-single,pins = <
-				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 			>;
 		};
 
 		dss_pins: dss_pins {
 			pinctrl-single,pins = <
-				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 			>;
 		};
 
 		display_mux_pins: display_mux_pins {
 			pinctrl-single,pins = <
 				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
 		vpfe1_pins_default: vpfe1_pins_default {
 			pinctrl-single,pins = <
-				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
-				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
-				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
-				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
-				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
-				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
-				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
-				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
-				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
-				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
-				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
-				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
-				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
 			>;
 		};
 
 		vpfe1_pins_sleep: vpfe1_pins_sleep {
 			pinctrl-single,pins = <
-				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 			>;
 		};
 
 		mcasp1_pins: mcasp1_pins {
 			pinctrl-single,pins = <
-				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
-				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
-				0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
-				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
 			>;
 		};
 
 		mcasp1_sleep_pins: mcasp1_sleep_pins {
 			pinctrl-single,pins = <
-				0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 };
@@ -376,7 +376,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mac {
@@ -491,7 +491,7 @@
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
 
 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 
@@ -561,9 +561,13 @@
 	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -582,11 +586,9 @@
 		gpmc,access-ns = <30>; /* tCEA + 4*/
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -792,3 +794,8 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&synctimer_32kclk {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index cc88728d751d..a38af2bfbfcf 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -259,6 +259,14 @@
 		ti,invert-autoidle-bit;
 	};
 
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
 	dpll_ddr_ck: dpll_ddr_ck {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index d55e3ea89fda..0a5fc5d02ce2 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -24,7 +24,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
+		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
 	vdd_3v3: fixedregulator-vdd_3v3 {
@@ -35,6 +35,14 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		/* TPS51200 */
 		compatible = "regulator-fixed";
@@ -142,102 +150,130 @@
 			};
 		};
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			assigned-clocks = <&clkoutmux2_clk_mux>;
+			assigned-clock-parents = <&sys_clk2_dclk_div>;
+			clocks = <&clkout2_clk>;
+		};
+	};
 };
 
 &dra7_pmx_core {
 	leds_pins_default: leds_pins_default {
 		pinctrl-single,pins = <
-			0x3a8 (PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
-			0x3ac (PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
-			0x3c0 (PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
-			0x3c4 (PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
+			DRA7XX_CORE_IOPAD(0x37a8, PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
+			DRA7XX_CORE_IOPAD(0x37ac, PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
+			DRA7XX_CORE_IOPAD(0x37c0, PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
+			DRA7XX_CORE_IOPAD(0x37c4, PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
 		>;
 	};
 
 	i2c1_pins_default: i2c1_pins_default {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			0x404 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
 		>;
 	};
 
 	hdmi_pins: pinmux_hdmi_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
 		>;
 	};
 
 	i2c3_pins_default: i2c3_pins_default {
 		pinctrl-single,pins = <
-			0x2a4 (PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			0x2a8 (PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
 		>;
 	};
 
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
-			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
 		>;
 	};
 
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 		>;
 	};
 
 	mmc2_pins_default: mmc2_pins_default {
 		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 		>;
 	};
 
 	cpsw_pins_default: cpsw_pins_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
 
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
 		>;
 
 	};
@@ -245,85 +281,115 @@
 	cpsw_pins_sleep: cpsw_pins_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_INPUT | MUX_MODE15)
-			0x254 (PIN_INPUT | MUX_MODE15)
-			0x258 (PIN_INPUT | MUX_MODE15)
-			0x25c (PIN_INPUT | MUX_MODE15)
-			0x260 (PIN_INPUT | MUX_MODE15)
-			0x264 (PIN_INPUT | MUX_MODE15)
-			0x268 (PIN_INPUT | MUX_MODE15)
-			0x26c (PIN_INPUT | MUX_MODE15)
-			0x270 (PIN_INPUT | MUX_MODE15)
-			0x274 (PIN_INPUT | MUX_MODE15)
-			0x278 (PIN_INPUT | MUX_MODE15)
-			0x27c (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
 
 			/* Slave 2 */
-			0x198 (PIN_INPUT | MUX_MODE15)
-			0x19c (PIN_INPUT | MUX_MODE15)
-			0x1a0 (PIN_INPUT | MUX_MODE15)
-			0x1a4 (PIN_INPUT | MUX_MODE15)
-			0x1a8 (PIN_INPUT | MUX_MODE15)
-			0x1ac (PIN_INPUT | MUX_MODE15)
-			0x1b0 (PIN_INPUT | MUX_MODE15)
-			0x1b4 (PIN_INPUT | MUX_MODE15)
-			0x1b8 (PIN_INPUT | MUX_MODE15)
-			0x1bc (PIN_INPUT | MUX_MODE15)
-			0x1c0 (PIN_INPUT | MUX_MODE15)
-			0x1c4 (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_pins_default: davinci_mdio_pins_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
 		>;
 	};
 
 	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
 		pinctrl-single,pins = <
-			0x23c (PIN_INPUT | MUX_MODE15)
-			0x240 (PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 
 	tps659038_pins_default: tps659038_pins_default {
 		pinctrl-single,pins = <
-			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
+			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
 		>;
 	};
 
 	tmp102_pins_default: tmp102_pins_default {
 		pinctrl-single,pins = <
-			0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
+			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
 		>;
 	};
 
 	mcp79410_pins_default: mcp79410_pins_default {
 		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
+			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
 		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
 
 	extcon_usb1_pins: extcon_usb1_pins {
 		pinctrl-single,pins = <
-			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x3b0 (PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
-			0x370 (PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
+			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
+			DRA7XX_CORE_IOPAD(0x3770, PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
+		>;
+	};
+
+	clkout2_pins_default: clkout2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3694, PIN_OUTPUT_PULLDOWN | MUX_MODE9)	/* xref_clk0.clkout2 */
+		>;
+	};
+
+	clkout2_pins_sleep: clkout2_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3694, PIN_INPUT | MUX_MODE15)	/* xref_clk0.clkout2 */
+		>;
+	};
+
+	mcasp3_pins_default: mcasp3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_pins_sleep: mcasp3_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
 		>;
 	};
 };
@@ -496,8 +562,7 @@
 		extcon_usb2: tps659038_usb {
 			compatible = "ti,palmas-usb-vid";
 			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 		};
 
 	};
@@ -511,6 +576,27 @@
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 		#thermal-sensor-cells = <1>;
 	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&clkout2_pins_default>;
+		pinctrl-1 = <&clkout2_pins_sleep>;
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c32";
+		reg = <0x50>;
+	};
 };
 
 &i2c3 {
@@ -524,6 +610,7 @@
 		reg = <0x6f>;
 		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
 				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&mcp79410_pins_default>;
@@ -586,7 +673,7 @@
 
 	vmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };
 
 &mmc2 {
@@ -709,3 +796,40 @@
 &pcie1 {
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins_default>;
+	pinctrl-1 = <&mcasp3_pins_sleep>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
new file mode 100644
index 000000000000..14f912a1b4fd
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -0,0 +1,617 @@
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra74x.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x";
+	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led@0 {
+			label = "cl-som-am57x:green";
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ads7846reg: fixedregulator-ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+		simple-audio-card,widgets =
+					"Headphone", "Headphone Jack",
+					"Microphone", "Microphone Jack",
+					"Line", "Line Jack";
+		simple-audio-card,routing =
+					"Headphone Jack", "RHPOUT",
+					"Headphone Jack", "LHPOUT",
+					"LLINEIN", "Line Jack",
+					"MICIN", "Mic Bias",
+					"Mic Bias", "Microphone Jack";
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	leds_pins_default: leds_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
+		>;
+	};
+
+	i2c1_pins_default: i2c1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+		>;
+	};
+
+	i2c3_pins_default: i2c3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+		>;
+	};
+
+	i2c4_pins_default: i2c4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
+			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
+		>;
+	};
+
+	tps659038_pins_default: tps659038_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
+
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave at addr 0x0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+			/* Slave at addr 0x1 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_tclk */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d11.mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+		>;
+	};
+
+	mcasp3_pins_default: mcasp3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_pins_sleep: mcasp3_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps659038_pins_default>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVA */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* PMIC_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_1V8 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* regen1 not used */
+			};
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	rtc0: rtc@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+
+	eeprom_module: atmel@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: wm8731@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+		status = "okay";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+
+	spi_flash: spi_flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,m25p80", "jedec,spi-nor";
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <48000000>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x0>;
+		};
+	};
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <1>;                              /* CS1 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 0>;
+		pendown-gpio = <&gpio1 31 0>;
+
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		wakeup-source;
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <0>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb2 {
+	dr_mode = "host";
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins_default>;
+	pinctrl-1 = <&mcasp3_pins_sleep>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&gpio3 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&gpio2 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
new file mode 100644
index 000000000000..988e99632d49
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -0,0 +1,179 @@
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+	compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi;
+	};
+};
+
+&dra7_pmx_core {
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdcd.gpio6_27 */
+			DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdwp.gpio6_28 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+		>;
+	};
+
+	i2c5_pins_default: i2c5_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14)      /* vin2a_vsync0.gpio4_0 */
+		>;
+	};
+
+	hdmi_pins: pinmux_hdmi_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+		>;
+	};
+
+	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14)	/* spi1_cs2.gpio7_12 */
+		>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom_base: atmel@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	port {
+		dpi_lcd_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&lcd0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins_default>;
+
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 0 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
+
+&hdmi_conn {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_conn_pins>;
+
+	hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&hdmi_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 4e0ad3b82796..0962f2fa3f6e 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -155,21 +155,21 @@
 			label = "keyswitch_in";
 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		error_in {
 			label = "error_in";
 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		btn {
 			label = "btn";
 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 1bc64cda819e..652d85b28aaa 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -53,6 +53,14 @@
 		regulator-boot-on;
         };
 
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -106,6 +114,53 @@
 		clock-frequency = <0>;
 	};
 
+	flash@30000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x30000000 0x4000000>;
+		bank-width = <4>;
+	};
+
+	fpga_flash@38000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x38000000 0x800000>;
+		bank-width = <4>;
+	};
+
+	/*
+	 * The "secure flash" contains things like the boot
+	 * monitor so we don't want people to accidentally
+	 * screw this up. Mark the device tree node disabled
+	 * by default.
+	 */
+	secflash@3c000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x3c000000 0x4000000>;
+		bank-width = <4>;
+		status = "disabled";
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet@3a000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x3a000000 0x10000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		port1-otg;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -176,6 +231,41 @@
 				label = "versatile:7";
 				default-state = "off";
 			};
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
 		};
 
 		/* Primary DevChip GIC synthesized with the CPU */
@@ -297,6 +387,13 @@
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		/* Direct-mapped development chip ROM */
+		pb1176_rom@10200000 {
+			compatible = "direct-mapped";
+			reg = <0x10200000 0x4000>;
+			bank-width = <1>;
+		};
 	};
 
 	/* These peripherals are inside the FPGA rather than the DevChip */
@@ -306,6 +403,27 @@
 		compatible = "simple-bus";
 		ranges;
 
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		fpga_aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
 		fpga_mci: mmcsd@10005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x10005000 0x1000>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
new file mode 100644
index 000000000000..63d6a051839f
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -0,0 +1,681 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "ARM RealView PB11MPcore";
+	compatible = "arm,realview-pb11mp";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb11mp_serial0;
+		serial1 = &pb11mp_serial1;
+		serial2 = &pb11mp_serial2;
+		serial3 = &pb11mp_serial3;
+	};
+
+	memory {
+		/*
+		 * The PB11MPCore has 512 MiB memory @ 0x70000000
+		 * and the first 256 are also remapped @ 0x00000000
+		 */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* Primary TestChip GIC synthesized with the CPU */
+	intc_tc11mp: interrupt-controller@1f000100 {
+		compatible = "arm,tc11mp-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,l220-cache";
+		reg = <0x1f002000 0x1000>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s), probably for safety
+		 * since th outer sync operation can cause the
+		 * cache to hang unless disabled.
+		 */
+		cache-size = <1048576>; // 1MB
+		cache-sets = <4096>;
+		cache-line-size = <32>;
+		arm,shared-override;
+		arm,parity-enable;
+		arm,outer-sync-disable;
+	};
+
+	scu@1f000000 {
+		compatible = "arm,arm11mp-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	timer@1f000600 {
+		compatible = "arm,arm11mp-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1f000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	/* PMU with one IRQ line per core */
+	pmu {
+		compatible = "arm,arm11mpcore-pmu";
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	flash1@44000000 {
+		// 2 * 32MiB NOR Flash memory
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb11mp-soc", "simple-bus";
+		regmap = <&pb11mp_syscon>;
+		ranges;
+
+		pb11mp_syscon: syscon@10000000 {
+			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				linux,default-trigger = "cpu1";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				linux,default-trigger = "cpu2";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				linux,default-trigger = "cpu3";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+
+			oscclk0: osc0@0c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: osc1@10 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: osc2@14 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: osc3@18 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: osc4@1c {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk5: osc5@d4 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd4>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk6: osc6@d8 {
+				compatible = "arm,syscon-icst307";
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd8>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon 0>,
+					  <&sp810_syscon 1>,
+					  <&sp810_syscon 2>,
+					  <&sp810_syscon 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+					<0 15 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		pb11mp_serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdogclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdogclk", "apb_pclk";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 0>,
+			         <&sp810_syscon 1>,
+				 <&pclk>;
+			clock-names = "timerclk0",
+				    "timerclk1",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 2>,
+			         <&sp810_syscon 3>,
+				 <&pclk>;
+			clock-names = "timerclk2",
+				    "timerclk3",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&pclk>;
+			clock-names = "timer", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&pclk>;
+			clock-names = "timer", "apb_pclk";
+			status = "disabled";
+		};
+
+
+		clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupt-names = "combined";
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&clcd_panel>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+
+			panel {
+				compatible = "panel-dpi";
+
+				port {
+					clcd_panel: endpoint {
+						remote-endpoint = <&clcd_pads>;
+					};
+				};
+
+				panel-timing {
+					clock-frequency = <63500127>;
+					hactive = <1024>;
+					hback-porch = <152>;
+					hfront-porch = <48>;
+					hsync-len = <104>;
+					vactive = <768>;
+					vback-porch = <23>;
+					vfront-porch = <3>;
+					vsync-len = <4>;
+				};
+			};
+		};
+
+		/*
+		 * This GIC on the Platform Baseboard is cascaded off the
+		 * TestChip GIC
+		 */
+		intc_pb11mp: interrupt-controller@1e000000 {
+			compatible = "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1e001000 0x1000>,
+			      <0x1e000000 0x100>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* SMSC 9118 ethernet with PHY and EEPROM */
+		ethernet@4e000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x4e000000 0x10000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&veth>;
+			vddvario-supply = <&veth>;
+		};
+
+		usb@4f000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <0x4f000000 0x20000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			port1-otg;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 03542f7b5b94..2364fc56ae13 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -74,7 +74,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
@@ -167,6 +168,33 @@
 					spi-max-frequency = <50000000>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x800000>;
+					};
+					partition@800000 {
+						label = "Linux";
+						reg = <0x800000 0x800000>;
+					};
+					partition@1000000 {
+						label = "Filesystem";
+						reg = <0x1000000 0x3f000000>;
+					};
+				};
+			};
 		};
 
 		pcie-controller {
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index af4dc548c1c0..e2a363b1dd8a 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -69,7 +69,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 0f40d5da28c3..d5e19cd4d256 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -61,7 +61,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -138,6 +139,10 @@
 				phy-mode = "rgmii-id";
 			};
 
+			crypto@90000 {
+				status = "okay";
+			};
+
 			mvsdio@d4000 {
 				pinctrl-0 = <&sdio_pins3>;
 				pinctrl-names = "default";
@@ -195,7 +200,7 @@
 &pinctrl {
 	pwr_led_pin: pwr-led-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	stat_led_pins: stat-led-pins {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index a31207860f34..39181b3fa90d 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -63,7 +63,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -82,6 +83,12 @@
 		};
 
 		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
 			serial@12000 {
 				status = "okay";
 			};
@@ -120,7 +127,7 @@
 				isl12057: isl12057@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
+					wakeup-source;
 				};
 
 				g762: g762@3e {
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 00540f292979..11565752b9f6 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -63,7 +63,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -82,6 +83,12 @@
 		};
 
 		internal-regs {
+
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
+			};
+
 			serial@12000 {
 				status = "okay";
 			};
@@ -126,7 +133,7 @@
 				isl12057: isl12057@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
+					wakeup-source;
 				};
 
 				g762: g762@3e {
@@ -290,7 +297,7 @@
 
 	backup_led_pin: backup-led-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	power_led_pin: power-led-pin {
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 19475e68b8e9..fbef730e8d37 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -74,7 +74,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
new file mode 100644
index 000000000000..fef0110a8d8a
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
@@ -0,0 +1,36 @@
+/*
+ * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 2-Bay
+ * Code name (board/PCB)        : Dart 2-Bay
+ * Model name (case sticker)    : SRPD20
+ * Material desc (product spec) : STCTxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+
+/ {
+	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
+	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  950 2
+			 1400 1
+			 1800 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 000000000000..ae2e1fe50ef6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,133 @@
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		pcie-controller {
+			/* SATA AHCI controller 88SE9170 */
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			mdio {
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulators {
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA2 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA3 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  800 2
+			  1050 1
+			  1300 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
new file mode 100644
index 000000000000..3036e25c5992
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* USB 3.0 bridge ASM1042A */
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+
+				/* RTC - NXP 8563T (second source) */
+				rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+					interrupts = <110>;
+				};
+				/* RTC - MCP7940NT */
+				rtc@6f {
+					compatible = "microchip,mcp7941x";
+					reg = <0x6f>;
+					interrupts = <110>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x300000>;
+				};
+				partition@300000 {
+					label = "device-tree";
+					reg = <0x300000 0x20000>;
+				};
+				partition@320000 {
+					label = "linux";
+					reg = <0x320000 0x2000000>;
+				};
+				partition@2320000 {
+					label = "rootfs";
+					reg = <0x2320000 0xdce0000>;
+				};
+			};
+		};
+
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
+			 &gpio2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Backup button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		white-power {
+			label = "dart:white:power";
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+
+		};
+		red-power {
+			label = "dart:red:power";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		};
+		red-sata0 {
+			label = "dart:red:sata0";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		red-sata1 {
+			label = "dart:red:sata1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
+	pinctrl-names = "default";
+
+	hdd0_led_sata_pin: hdd0-led-sata-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "sata1";
+	};
+	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+	hdd1_led_sata_pin: hdd1-led-sata-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 000000000000..3c91f9821c89
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,51 @@
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
new file mode 100644
index 000000000000..aad39e97af43
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
@@ -0,0 +1,37 @@
+/*
+ * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud
+ * Code name (board/PCB)        : Cumulus
+ * Model name (case sticker)    : SRN21C
+ * Material desc (product spec) : STCRxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud (Cumulus, SRN21C)";
+	compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
new file mode 100644
index 000000000000..1aba08e4377c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* USB 3.0 Bridge ASM1042A */
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			coherency-fabric@20200 {
+				broken-idle;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi@10600 {
+				status = "okay";
+				pinctrl-0 = <&spi0_pins2>;
+				pinctrl-names = "default";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/* MX25L8006E */
+					compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+
+					partition@0 {
+						label = "u-boot";
+						reg = <0x0 0x100000>;
+					};
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+		};
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button@3 {
+			label = "USB VBUS error";
+			linux,code = <KEY_UNKNOWN>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-sata0 {
+			label = "cumulus:red:sata0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&sata_led_pin>;
+	pinctrl-names = "default";
+
+	sata_led_pin: sata-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "sata0";
+	};
+	gpio_led_pin: gpio-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 4f4924362bf0..8ca7a4340c0f 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -77,7 +77,8 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 
@@ -338,7 +339,7 @@
 
 	fan_ctrl_high_pin: fan-ctrl-high-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	fan_alarm_pin: fan-alarm-pin {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 53a1a5abe147..3b06aa835448 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -256,6 +256,11 @@
 				reg = <0x20800 0x8>;
 			};
 
+			cpu-config@21000 {
+				compatible = "marvell,armada-370-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
 			audio_controller: audio-controller@30000 {
 				#sound-dai-cells = <1>;
 				compatible = "marvell,armada370-audio";
@@ -319,6 +324,38 @@
 			ethernet@74000 {
 				compatible = "marvell,armada-370-neta";
 			};
+
+			crypto@90000 {
+				compatible = "marvell,armada-370-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>;
+				clocks = <&gateclk 23>;
+				clock-names = "cesa0";
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x7e0>;
+			};
+		};
+
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
+			reg-names = "sram";
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
+
+			/*
+			 * The Armada 370 has an erratum preventing the use of
+			 * the standard workflow for CPU idle support (relying
+			 * on the BootROM code to enter/exit idle state).
+			 * Reserve some amount of the crypto SRAM to put the
+			 * cpuidle workaround.
+			 */
+			idle-sram@0 {
+				reg = <0x0 0x20>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 5711b97e876c..cded5f0a262d 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -65,7 +65,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			spi@10600 {
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index e9a381741ce1..cc952cf8ec30 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -513,8 +513,23 @@
 				};
 			};
 
+			crypto@90000 {
+				compatible = "marvell,armada-375-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>, <&gateclk 31>,
+					 <&gateclk 28>, <&gateclk 29>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
 			sata@a0000 {
-				compatible = "marvell,orion-sata";
+				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 14>, <&gateclk 20>;
@@ -619,5 +634,23 @@
 			};
 
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 31>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 4047621b137e..2d3fd6e76e2c 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -59,7 +59,10 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi1: spi@10680 {
@@ -132,18 +135,27 @@
 				};
 			};
 
+			/* CON3 */
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+				bm,pool-short = <3>;
 			};
 
+			/* CON2 */
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
+			/* CON4 */
 			ethernet@70000 {
 				pinctrl-names = "default";
 
@@ -155,6 +167,13 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <3>;
+			};
+
+			bm@c8000 {
+				status = "okay";
 			};
 
 			nfc: flash@d0000 {
@@ -176,6 +195,10 @@
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 74a9c6b54fa7..85d2c377c332 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -57,7 +57,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 
@@ -115,7 +117,7 @@
 			};
 
 			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
+			usb@58000 {
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
new file mode 100644
index 000000000000..c60206efb583
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -0,0 +1,462 @@
+/*
+ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board.  Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "SolidRun Clearfog A1";
+	compatible = "solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc {
+		internal-regs {
+			ethernet@30000 {
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <1>;
+				status = "okay";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@34000 {
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+				bm,pool-short = <1>;
+				status = "okay";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			i2c@11000 {
+				/* Is there anything on this? */
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-CON3 CLKREQ#
+				 *  1-CON3 PERST#
+				 *  2-CON2 PERST#
+				 *  3-CON3 W_DISABLE
+				 *  4-CON2 CLKREQ#
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 *  7-CON2 W_DISABLE
+				 *  8-JP4 P1
+				 *  9-JP4 P4
+				 * 10-JP4 P5
+				 * 11-m.2 DEVSLP
+				 * 12-SFP_LOS
+				 * 13-SFP_TX_FAULT
+				 * 14-SFP_TX_DISABLE
+				 * 15-SFP_MOD_DEF0
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+
+					pcie1_0_clkreq {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "pcie1.0-clkreq";
+					};
+					pcie1_0_w_disable {
+						gpio-hog;
+						gpios = <3 GPIO_ACTIVE_LOW>;
+						output-low;
+						line-name = "pcie1.0-w-disable";
+					};
+					pcie2_0_clkreq {
+						gpio-hog;
+						gpios = <4 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "pcie2.0-clkreq";
+					};
+					pcie2_0_w_disable {
+						gpio-hog;
+						gpios = <7 GPIO_ACTIVE_LOW>;
+						output-low;
+						line-name = "pcie2.0-w-disable";
+					};
+					usb3_ilimit {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "usb3-current-limit";
+					};
+					usb3_power {
+						gpio-hog;
+						gpios = <6 GPIO_ACTIVE_HIGH>;
+						output-high;
+						line-name = "usb3-power";
+					};
+					m2_devslp {
+						gpio-hog;
+						gpios = <11 GPIO_ACTIVE_HIGH>;
+						output-low;
+						line-name = "m.2 devslp";
+					};
+					sfp_los {
+						/* SFP loss of signal */
+						gpio-hog;
+						gpios = <12 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "sfp-los";
+					};
+					sfp_tx_fault {
+						/* SFP laser fault */
+						gpio-hog;
+						gpios = <13 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "sfp-tx-fault";
+					};
+					sfp_tx_disable {
+						/* SFP transmit disable */
+						gpio-hog;
+						gpios = <14 GPIO_ACTIVE_HIGH>;
+						output-low;
+						line-name = "sfp-tx-disable";
+					};
+					sfp_mod_def0 {
+						/* SFP module present */
+						gpio-hog;
+						gpios = <15 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "sfp-mod-def0";
+					};
+				};
+
+				/* The MCP3021 is 100kHz clock only */
+				mikrobus_adc: mcp3021@4c {
+					compatible = "microchip,mcp3021";
+					reg = <0x4c>;
+				};
+
+				/* Also something at 0x64 */
+			};
+
+			i2c@11100 {
+				/*
+				 * Routed to SFP, mikrobus, and PCIe.
+				 * SFP limits this to 100kHz, and requires
+				 *  an AT24C01A/02/04 with address pins tied
+				 *  low, which takes addresses 0x50 and 0x51.
+				 * Mikrobus doesn't specify beyond an I2C
+				 *  bus being present.
+				 * PCIe uses ARP to assign addresses, or
+				 *  0x63-0x64.
+				 */
+				clock-frequency = <100000>;
+				pinctrl-0 = <&clearfog_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			mdio@72004 {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+
+				phy_dedicated: ethernet-phy@0 {
+					/*
+					 * Annoyingly, the marvell phy driver
+					 * configures the LED register, rather
+					 * than preserving reset-loaded setting.
+					 * We undo that rubbish here.
+					 */
+					marvell,reg-init = <3 16 0 0x101e>;
+					reg = <0>;
+				};
+			};
+
+			pinctrl@18000 {
+				clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+				clearfog_dsa0_pins: clearfog-dsa0-pins {
+					marvell,pins = "mpp23", "mpp41";
+					marvell,function = "gpio";
+				};
+				clearfog_i2c1_pins: i2c1-pins {
+					/* SFP, PCIe, mSATA, mikrobus */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				clearfog_sdhci_pins: clearfog-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				clearfog_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp55";
+					marvell,function = "spi1";
+				};
+				mikro_pins: mikro-pins {
+					/* int: mpp22 rst: mpp29 */
+					marvell,pins = "mpp22", "mpp29";
+					marvell,function = "gpio";
+				};
+				mikro_spi_pins: mikro-spi-pins {
+					marvell,pins = "mpp43";
+					marvell,function = "spi1";
+				};
+				mikro_uart_pins: mikro-uart-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "ua1";
+				};
+				rear_button_pins: rear-button-pins {
+					marvell,pins = "mpp34";
+					marvell,function = "gpio";
+				};
+			};
+
+			sata@a8000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sata@e0000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&clearfog_sdhci_pins
+					     &clearfog_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			serial@12100 {
+				/* mikrobus uart */
+				pinctrl-0 = <&mikro_uart_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			spi@10680 {
+				/*
+				 * We don't seem to have the W25Q32 on the
+				 * A1 Rev 2.0 boards, so disable SPI.
+				 * CS0: W25Q32 (doesn't appear to be present)
+				 * CS1:
+				 * CS2: mikrobus
+				 */
+				pinctrl-0 = <&spi1_pins
+					     &clearfog_spi1_cs_pins
+					     &mikro_spi_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "w25q32", "jedec,spi-nor";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <3000000>;
+					status = "disabled";
+				};
+			};
+
+			usb@58000 {
+				/* CON3, nearest  power. */
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				/* CON2, nearest CPU, USB2 only. */
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				/* CON7 */
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0. CON3, nearest power. */
+				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0. CON2, nearest CPU. */
+				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		dsa,ethernet = <&eth1>;
+		dsa,mii-bus = <&mdio>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4 0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button_0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 91ac8c118f37..ea93ed727030 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -64,7 +64,10 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi@10600 {
@@ -97,6 +100,9 @@
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			usb@58000 {
@@ -107,6 +113,9 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 			mdio@72004 {
@@ -127,6 +136,10 @@
 				status = "okay";
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			flash@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -167,6 +180,10 @@
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 			/*
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 353c92532e7a..fd75e5e9550f 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -44,8 +44,8 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Marvell Armada 385 GP";
-	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+	model = "Marvell Armada 388 DB-88F6820-GP";
+	compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,7 +58,10 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 			spi@10600 {
@@ -131,6 +134,9 @@
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			/* CON4 */
@@ -150,6 +156,9 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 
@@ -184,6 +193,10 @@
 				};
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			sata@e0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@@ -205,8 +218,21 @@
 			sdhci@d8000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&sdhci_pins>;
-				cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
 				no-1-8-v;
+				/*
+				 * A388-GP board v1.5 and higher replace
+				 * hitherto card detection method based on GPIO
+				 * with the one using DAT3 pin. As they are
+				 * incompatible, software-based polling is
+				 * enabled with 'broken-cd' property. For boards
+				 * older than v1.5 it can be replaced with:
+				 * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+				 * whereas for the newer ones following can be
+				 * used instead:
+				 * 'dat3-cd;'
+				 * 'cd-inverted;'
+				 */
+				broken-cd;
 				wp-inverted;
 				bus-width = <8>;
 				status = "okay";
@@ -214,17 +240,21 @@
 
 			/* CON5 */
 			usb3@f0000 {
-				vcc-supply = <&reg_usb2_1_vbus>;
+				usb-phy = <&usb2_1_phy>;
 				status = "okay";
 			};
 
 			/* CON7 */
 			usb3@f8000 {
-				vcc-supply = <&reg_usb3_vbus>;
+				usb-phy = <&usb3_phy>;
 				status = "okay";
 			};
 		};
 
+		bm-bppi {
+			status = "okay";
+		};
+
 		pcie-controller {
 			status = "okay";
 			/*
@@ -258,13 +288,22 @@
 		};
 	};
 
+	usb2_1_phy: usb2_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb2_1_vbus>;
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+	};
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -284,17 +323,6 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
-		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb2_1_vbus: v5-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -304,7 +332,7 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -313,7 +341,6 @@
 		regulator-name = "v5.0-sata0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -322,7 +349,6 @@
 		regulator-name = "v12.0-sata0";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -332,7 +358,7 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -341,7 +367,6 @@
 		regulator-name = "v5.0-sata1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -350,7 +375,6 @@
 		regulator-name = "v12.0-sata1";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -358,7 +382,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata2";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -367,7 +391,6 @@
 		regulator-name = "v5.0-sata2";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -376,7 +399,6 @@
 		regulator-name = "v12.0-sata2";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -384,7 +406,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata3";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -393,7 +415,6 @@
 		regulator-name = "v5.0-sata3";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 
@@ -402,7 +423,6 @@
 		regulator-name = "v12.0-sata3";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 };
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index b657b1687e5f..853f9735cc70 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -65,7 +65,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			spi@10600 {
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 000000000000..8c9842237b60
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ *  Copyright (C) 2015 Russell King
+ *
+ * This board is in development; the contents of this file work with
+ * the A1 rev 2.0 of the board, which does not represent final
+ * production board.  Things will change, don't expect this file to
+ * remain compatible info the future.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy_dedicated>;
+				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
+				status = "okay";
+			};
+
+			mdio@72004 {
+				/*
+				 * Add the phy clock here, so the phy can be
+				 * accessed to read its IDs prior to binding
+				 * with the driver.
+				 */
+				pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
+				pinctrl-names = "default";
+
+				phy_dedicated: ethernet-phy@0 {
+					/*
+					 * Annoyingly, the marvell phy driver
+					 * configures the LED register, rather
+					 * than preserving reset-loaded setting.
+					 * We undo that rubbish here.
+					 */
+					marvell,reg-init = <3 16 0 0x101e>;
+					reg = <0>;
+				};
+			};
+
+			pinctrl@18000 {
+				microsom_phy_clk_pins: microsom-phy-clk-pins {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+			};
+
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+
+			serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index f9f2347d9995..3312be6c82cc 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -429,6 +429,27 @@
 				reg = <0x22000 0x1000>;
 			};
 
+			/*
+			 * As a special exception to the "order by
+			 * register address" rule, the eth0 node is
+			 * placed here to ensure that it gets
+			 * registered as the first interface, since
+			 * the network subsystem doesn't allow naming
+			 * interfaces using DT aliases. Without this,
+			 * the ordering of interfaces is different
+			 * from the one used in U-Boot and the
+			 * labeling of interfaces on the boards, which
+			 * is very confusing for users.
+			 */
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				tx-csum-limit = <9800>;
+				status = "disabled";
+			};
+
 			eth1: ethernet@30000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x30000 0x4000>;
@@ -493,14 +514,6 @@
 				};
 			};
 
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts-extended = <&mpic 8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
 			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -509,6 +522,21 @@
 				clocks = <&gateclk 4>;
 			};
 
+			crypto@90000 {
+				compatible = "marvell,armada-38x-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 23>, <&gateclk 21>,
+					 <&gateclk 14>, <&gateclk 16>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
 			rtc@a3800 {
 				compatible = "marvell,armada-380-rtc";
 				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
@@ -524,6 +552,14 @@
 				status = "disabled";
 			};
 
+			bm: bm@c8000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc8000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
 			sata@e0000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xe0000 0x2000>;
@@ -584,6 +620,35 @@
 				status = "disabled";
 			};
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+			clocks = <&gateclk 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 60bbfe32bb80..5c21b236721f 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -69,7 +69,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 7dd900f158be..62422a90aeb2 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -75,7 +75,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -179,21 +182,33 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			bm@c0000 {
+				status = "okay";
 			};
 
 			mvsdio@d4000 {
@@ -227,6 +242,38 @@
 					spi-max-frequency = <20000000>;
 				};
 			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x800000>;
+					};
+					partition@800000 {
+						label = "Linux";
+						reg = <0x800000 0x800000>;
+					};
+					partition@1000000 {
+						label = "Filesystem";
+						reg = <0x1000000 0x3f000000>;
+
+					};
+				};
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index bf724ca96a33..061f4237760e 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -94,7 +94,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -194,21 +197,29 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 
 			/* Front-side USB slot */
@@ -233,6 +244,10 @@
 				};
 			};
 
+			bm@c0000 {
+				status = "okay";
+			};
+
 			nand@d0000 {
 				status = "okay";
 				num-cs = <1>;
@@ -241,5 +256,9 @@
 				nand-on-flash-bbt;
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 06a6a6c1fdf7..8af463f26ea1 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -64,7 +64,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -149,42 +151,43 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0xe0000>;
-					read-only;
-				};
-
-				partition@e0000 {
-					label = "u-boot-env";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env2";
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "zImage";
-					reg = <0x120000 0x400000>;
-				};
-
-				partition@520000 {
-					label = "initrd";
-					reg = <0x520000 0x400000>;
-				};
-
-				partition@xE00000 {
-					label = "boot";
-					reg = <0xE00000 0x3F200000>;
-				};
-
-				partition@flash {
-					label = "flash";
-					reg = <0x0 0x40000000>;
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "u-boot";
+						reg = <0x00000000 0x000e0000>;
+						read-only;
+					};
+
+					partition@e0000 {
+						label = "u-boot-env";
+						reg = <0x000e0000 0x00020000>;
+						read-only;
+					};
+
+					partition@100000 {
+						label = "u-boot-env2";
+						reg = <0x00100000 0x00020000>;
+						read-only;
+					};
+
+					partition@120000 {
+						label = "zImage";
+						reg = <0x00120000 0x00400000>;
+					};
+
+					partition@520000 {
+						label = "initrd";
+						reg = <0x00520000 0x00400000>;
+					};
+
+					partition@e00000 {
+						label = "boot";
+						reg = <0x00e00000 0x3f200000>;
+					};
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index fdd187c55aa5..b89e6cf1271a 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -69,7 +69,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index f894bc83e957..6522b04f4a8e 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -67,7 +67,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 1516fc2627f9..d19f44c70925 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -63,7 +63,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
@@ -88,41 +90,10 @@
 		};
 
 		internal-regs {
-			/* Two rear eSATA ports */
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
 
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
 			};
 
 			i2c@11000 {
@@ -130,12 +101,6 @@
 				clock-frequency = <400000>;
 				status = "okay";
 
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
-				};
-
 				/* Controller for rear fan #1 of 3 (Protechnic
 				 * MGT4012XB-O20, 8000RPM) near eSATA port */
 				g762_fan1: g762@3e {
@@ -172,6 +137,49 @@
 					compatible = "gmt,g751";
 					reg = <0x4c>;
 				};
+
+				isl12057: isl12057@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 
 			nand@d0000 {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 990e8a2100f0..ed3b889d16ce 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -65,7 +65,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -174,21 +177,29 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 			i2c@11000 {
 				status = "okay";
@@ -217,6 +228,14 @@
 			usb@51000 {
 				status = "okay";
 			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 20267ad2f61e..d17dab0a6f51 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -77,7 +77,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 3de9b761cc1a..553349c07f28 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -184,6 +184,11 @@
 				reg = <0x20800 0x20>;
 			};
 
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
 			eth2: ethernet@30000 {
 				compatible = "marvell,armada-xp-neta";
 				reg = <0x30000 0x4000>;
@@ -236,6 +241,26 @@
 				compatible = "marvell,armada-xp-neta";
 			};
 
+			crypto@90000 {
+				compatible = "marvell,armada-xp-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>, <49>;
+				clocks = <&gateclk 23>, <&gateclk 23>;
+				clock-names = "cesa0", "cesa1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
 			xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
@@ -256,6 +281,35 @@
 				};
 			};
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
new file mode 100644
index 000000000000..f823ed382ac7
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -0,0 +1,64 @@
+/*
+ * Axis ARTPEC-6 development board.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+	model = "ARTPEC-6 development board";
+	compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		phy1: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
new file mode 100644
index 000000000000..30430162b886
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -0,0 +1,270 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "axis,artpec6";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&pl310>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&pl310>;
+		};
+	};
+
+	syscon {
+		compatible = "axis,artpec6-syscon", "syscon";
+		reg = <0xf8000000 0x48>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		psci_version = <0x84000000>;
+		cpu_on = <0x84000003>;
+		system_reset = <0x84000009>;
+	};
+
+	scu@faf00000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfaf00000 0x58>;
+	};
+
+	/* Main external clock driving CPU and peripherals */
+	ext_clk: ext_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	/* PLL1 is used by CPU and some peripherals */
+	pll1_clk: pll1_clk@f8000000 {
+		#clock-cells = <0>;
+		compatible = "axis,artpec6-pll1-clock";
+		reg = <0xf8000000 4>;
+		clocks = <&ext_clk>;
+	};
+
+	cpu_clk: cpu_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&pll1_clk>;
+		clock-output-names = "cpu_clk";
+	};
+
+	cpu_clkdiv2: cpu_clkdiv2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&cpu_clk>;
+	};
+
+	cpu_clkdiv4: cpu_clkdiv4 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&cpu_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <8>;
+		clock-mult = <1>;
+		clocks = <&cpu_clk>;
+		clock-output-names = "apb_pclk";
+	};
+
+	/* PLL2 is used by a number of peripherals, including UDL */
+	pll2: pll2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <24>;
+		clocks = <&ext_clk>;
+	};
+
+	/* PLL2DIV2 is used by the Fractional Clock Divider, for i2s */
+	pll2div2: pll2div2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&pll2>;
+	};
+
+	pll2div12: pll2div12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <12>;
+		clock-mult = <1>;
+		clocks = <&pll2>;
+	};
+
+	pll2div24: pll2div24 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&pll2>;
+		clock-output-names = "uart_clk";
+	};
+
+
+	gtimer@faf00200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfaf00200 0x20>;
+		interrupts = <GIC_PPI 11 0xf01>;
+		clocks = <&cpu_clkdiv2>;
+	};
+
+	timer@faf00600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xfaf00600 0x20>;
+		interrupts = <GIC_PPI 13 0xf04>;
+		clocks = <&cpu_clkdiv2>;
+		status = "disabled";
+	};
+
+	intc: interrupt-controller@faf01000 {
+		interrupt-controller;
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+	};
+
+	pl310: cache-controller@faf10000 {
+		compatible = "arm,pl310-cache";
+		cache-unified;
+		cache-level = <2>;
+		reg = <0xfaf10000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+		arm,filter-ranges = <0x0 0x80000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&intc>;
+	};
+
+	amba@0 {
+		compatible = "simple-bus";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		dma-ranges = <0x80000000 0x00000000 0x40000000>;
+		dma-coherent;
+
+		ethernet: ethernet@f8010000 {
+			clock-names = "phy_ref_clk", "apb_pclk";
+			clocks = <&ext_clk>, <&apb_pclk>;
+			compatible = "snps,dwc-qos-ethernet-4.10";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xf8010000 0x4000>;
+
+			snps,write-requests = <2>;
+			snps,read-requests = <16>;
+			snps,txpbl = <8>;
+			snps,rxpbl = <2>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@f8036000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8036000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart1: serial@f8037000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8037000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart2: serial@f8038000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8038000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+		uart3: serial@f8039000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8039000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll2div24>, <&apb_pclk>;
+			clock-names = "uart_clk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index f89598af4c2b..6bf873e7d96c 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -159,7 +159,7 @@
 			label = "Button";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index bf18ece0c027..229e989eb60d 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -24,15 +24,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		main_xtal {
 			clock-frequency = <18432000>;
 		};
@@ -94,14 +85,14 @@
 			label = "PB_RST";
 			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		user {
 			label = "PB_USER";
 			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
index f0b1563cb3f1..50a14568f094 100644
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -171,21 +171,21 @@
 			label = "PB_PROG";
 			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		reset {
 			label = "PB_RST";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		user {
 			label = "PB_USER";
 			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
index 9f72b4932634..9682d105d4d8 100644
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -98,14 +98,14 @@
 			label = "PB_PROG";
 			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x102>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		reset {
 			label = "PB_RST";
 			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index a9aef53ab764..4f2eebf4a560 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -183,7 +183,7 @@
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index e8d63afdb135..21c780fab761 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -44,6 +44,9 @@
  */
 /dts-v1/;
 #include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Atmel SAMA5D2 Xplained";
@@ -58,15 +61,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -78,11 +72,20 @@
 
 	ahb {
 		usb0: gadget@00300000 {
+			atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
+					   &pioA 42 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
@@ -90,8 +93,26 @@
 			status = "okay";
 		};
 
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-1_8v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+		};
+
 		apb {
 			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
 				status = "okay";
 
 				m25p80@0 {
@@ -102,25 +123,151 @@
 			};
 
 			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			pdmic@f8018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pdmic_default>;
+				atmel,model = "PDMIC @ sama5d2_xplained";
+				atmel,mic-min-freq = <1000000>;
+				atmel,mic-max-freq = <3246000>;
+				atmel,mic-offset = <0x0>;
+				status = "okay";
 			};
 
 			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
 				status = "okay";
 			};
 
 			i2c0: i2c@f8028000 {
 				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: DCDC_REG1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-always-on;
+						};
+
+						vdd_1v2_reg: DCDC_REG2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-always-on;
+						};
+
+						vdd_3v3_reg: DCDC_REG3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vdd_fuse_reg: LDO_REG1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-always-on;
+						};
+
+						vdd_3v3_lp_reg: LDO_REG2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vdd_led_reg: LDO_REG3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vdd_sdhc_1v8_reg: LDO_REG4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&flx0_clk>;
+					clock-names = "usart";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					atmel,fifo-size = <32>;
+					status = "okay";
+				};
+			};
+
+			watchdog@f8048040 {
 				status = "okay";
 			};
 
 			uart3: serial@fc008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
 				status = "okay";
 			};
 
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					dmas = <0>, <0>;
+					dma-names = "tx", "rx";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&flx4_clk>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					atmel,fifo-size = <16>;
+					status = "okay";
+				};
+			};
+
 			i2c1: i2c@fc028000 {
 				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
 				status = "okay";
 
 				at24@54 {
@@ -129,6 +276,198 @@
 					pagesize = <16>;
 				};
 			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pdmic_default: pdmic_default {
+					pinmux = <PIN_PB26__PDMIC_DAT>,
+						<PIN_PB27__PDMIC_CLK>;
+					bias-disable;
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+					};
+
+					ck_cd_rstn_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-pull-up;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		bp1 {
+			label = "PB_USER";
+			gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		red {
+			label = "red";
+			gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d81474e0bcd6..f3e2b96c06a3 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -76,7 +76,7 @@
 				pmic: act8865@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
-					status = "okay";
+					status = "disabled";
 
 					regulators {
 						vcc_1v8_reg: DCDC_REG1 {
@@ -303,6 +303,7 @@
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	gpio_keys {
@@ -315,7 +316,7 @@
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
new file mode 100644
index 000000000000..e7b2109fc85a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "sama5d4.dtsi"
+
+/ {
+	model = "DENX MA5D4";
+	compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		main_clock: main_clock {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+
+		clk20m: clk20m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+			clock-output-names = "clk20m";
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					broken-cd;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
+				status = "okay";
+
+				can0: can@0 {
+					compatible = "microchip,mcp2515";
+					reg = <0>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <6 GPIO_ACTIVE_LOW>;
+					spi-max-frequency = <10000000>;
+				};
+
+				can1: can@1 {
+					compatible = "microchip,mcp2515";
+					reg = <1>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <7 GPIO_ACTIVE_LOW>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "RST_n MCI0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
new file mode 100644
index 000000000000..abaaba58fbec
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "at91-sama5d4_ma5d4.dtsi"
+
+/ {
+	model = "DENX MA5D4EVK";
+	compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 14 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			usart0: serial@f802c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f8030000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+			};
+
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		user1 {
+			label = "user1";
+			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user2 {
+			label = "user2";
+			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user3 {
+			label = "user3";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		/* Actually Ampire 800480R2 */
+		compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
+		backlight = <&backlight>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_mmc1_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 07f46963335b..da84e65b56ef 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -50,7 +50,6 @@
 	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "ignore_loglevel earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -59,15 +58,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -96,10 +86,12 @@
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};
@@ -162,6 +154,10 @@
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};
@@ -235,7 +231,7 @@
 			label = "pb_user1";
 			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -246,7 +242,7 @@
 		d8 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			status = "disabled";
+			default-state = "on";
 		};
 
 		d10 {
@@ -272,5 +268,6 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 49a59c7e4a5d..4e98cda97403 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -50,7 +50,6 @@
 	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "ignore_loglevel earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -59,15 +58,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -148,11 +138,37 @@
 					clocks = <&pck2>;
 					clock-names = "mclk";
 				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				atmel_mxt_ts@4c {
+					compatible = "atmel,atmel_mxt_ts";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -184,6 +200,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -204,6 +224,14 @@
 						atmel,pins =
 							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
 					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};
@@ -277,7 +305,7 @@
 			label = "pb_user1";
 			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
new file mode 100644
index 000000000000..79aec55e1ebc
--- /dev/null
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -0,0 +1,256 @@
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@64 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "disable";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "disable";
+		};
+
+		usb2: ehci@00600000 {
+			/* 4G Modem */
+			status = "okay";
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 60edd8baebb8..f6cb7a80a2f5 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -97,7 +97,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -426,7 +426,7 @@
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				clocks = <&ssc0_clk>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc1: ssc@fffd4000 {
@@ -437,7 +437,7 @@
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				clocks = <&ssc1_clk>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc2: ssc@fffd8000 {
@@ -448,7 +448,7 @@
 				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
 				clocks = <&ssc2_clk>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			macb0: ethernet@fffbc000 {
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 8dab4b75ca97..f90e1c2d3caa 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -21,15 +21,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index be9c027ddd97..d4884dd1c243 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -100,7 +100,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9260-pmc";
+				compatible = "atmel,at91sam9260-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index ce1e3e94a40c..5e09de4eb9cd 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -568,7 +568,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 2e92ac020f23..55bd51f07fa6 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -22,15 +22,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -149,7 +140,7 @@
 					ti,debounce-tol = /bits/ 16 <65535>;
 					ti,debounce-max = /bits/ 16 <1>;
 
-					linux,wakeup;
+					wakeup-source;
 				};
 			};
 
@@ -193,28 +184,28 @@
 			label = "button_0";
 			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button_1 {
 			label = "button_1";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <257>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button_2 {
 			label = "button_2";
 			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 			linux,code = <258>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button_3 {
 			label = "button_3";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <259>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index f1f5fa3a9e6e..93446420af25 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -93,7 +93,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 23381276ffb8..59df9d73d276 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -22,15 +22,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <16367660>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -213,14 +204,14 @@
 			label = "left_click";
 			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right_click {
 			label = "right_click";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 57548a2c5a1e..e9cc99b6353a 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -19,15 +19,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -206,14 +197,14 @@
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		btn4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18b8b9e29704..af8b708ac312 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -114,7 +114,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc";
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index d1ae60a855d4..2400c99134f7 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -24,15 +24,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 		      clock-frequency = <32768>;
 		};
@@ -198,6 +189,8 @@
 					isi_0: endpoint {
 						remote-endpoint = <&ov2640_0>;
 						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
 					};
 				};
 			};
@@ -321,14 +314,14 @@
 			label = "left_click";
 			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right_click {
 			label = "right_click";
 			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 32bc9a189db0..95569a87b6c9 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -97,7 +97,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9n12-pmc";
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index efa75064d38a..626c67d66626 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -23,15 +23,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <16000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -71,10 +62,6 @@
 				};
 			};
 
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
 			mmc0: mmc@f0008000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc0
@@ -204,13 +191,13 @@
 		};
 
 		d9 {
-			label = "d6";
+			label = "d9";
 			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d10 {
-			label = "d7";
+			label = "d10";
 			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -223,12 +210,12 @@
 			label = "Enter";
 			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	panel: panel {
-		compatible = "qd,qd43003c0-40", "simple-panel";
+		compatible = "qiaodian,qd43003c0-40", "simple-panel";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index a0b90aedd3b8..6d829db4e887 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -814,7 +814,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc";
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 558c9f220bed..f10566f759cd 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -22,15 +22,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -225,14 +216,14 @@
 			label = "right_click";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left_click {
 			label = "left_click";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 747d8f070a5c..0827d594b1f0 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -68,7 +68,7 @@
 		adc_op_clk: adc_op_clk{
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <5000000>;
+			clock-frequency = <1000000>;
 		};
 	};
 
@@ -105,7 +105,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9x5-pmc";
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -1043,6 +1043,7 @@
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
 				atmel,adc-startup-time = <40>;
+				atmel,adc-sample-hold-time = <11>;
 				atmel,adc-res = <8 10>;
 				atmel,adc-res-names = "lowres", "highres";
 				atmel,adc-use-res = "highres";
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 26112ebd15fc..b098ad8cd93a 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -13,17 +13,6 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index d237c462dfc6..52425a4ca97e 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -66,6 +66,8 @@
 					isi_0: endpoint@0 {
 						remote-endpoint = <&ov2640_0>;
 						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
 					};
 				};
 			};
@@ -100,6 +102,12 @@
 				};
 			};
 
+			adc0: adc@f804c000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "okay";
+			};
+
 			pinctrl@fffff400 {
 				camera_sensor {
 					pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
index ea288f0a1d39..a9d6d593fc8a 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -107,7 +107,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 24c935c72e5e..051ab3ba9a65 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -89,4 +89,9 @@
 			regulator-name = "ldo5";
 		};
 	};
+
+	usb_power_supply: usb_power_supply {
+		compatible = "x-powers,axp202-usb-power-supply";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
new file mode 100644
index 000000000000..76302f58c478
--- /dev/null
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 32bcd45ef22b..80b6ba4ca50c 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -121,4 +121,13 @@ clocks {
 		clocks = <&osc>;
 		clock-output-names = "keypad", "adc/touch", "pwm";
 	};
+
+	audiopll: audiopll {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-audiopll";
+		reg = <0x180aeb00 0x68>;
+		clocks = <&osc>;
+		clock-output-names = "audiopll", "ch0_audio",
+					"ch1_audio", "ch2_audio";
+	};
 };
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index e1ac07a16f92..3878793364f0 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -32,6 +32,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
 
 #include "skeleton.dtsi"
 
@@ -54,197 +55,309 @@
 
 	/include/ "bcm-cygnus-clock.dtsi"
 
-	pinctrl: pinctrl@0x0301d0c8 {
-		compatible = "brcm,cygnus-pinmux";
-		reg = <0x0301d0c8 0x30>,
-		      <0x0301d24c 0x2c>;
-	};
-
-	gpio_crmu: gpio@03024800 {
-		compatible = "brcm,cygnus-crmu-gpio";
-		reg = <0x03024800 0x50>,
-		      <0x03024008 0x18>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	gpio_ccm: gpio@1800a000 {
-		compatible = "brcm,cygnus-ccm-gpio";
-		reg = <0x1800a000 0x50>,
-		      <0x0301d164 0x20>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-	};
+	core {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-	gpio_asiu: gpio@180a5000 {
-		compatible = "brcm,cygnus-asiu-gpio";
-		reg = <0x180a5000 0x668>;
-		#gpio-cells = <2>;
-		gpio-controller;
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+		};
 
-		pinmux = <&pinctrl>;
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
 
-		interrupt-controller;
-		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
-	amba {
+	axi {
+		compatible = "simple-bus";
+		ranges;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus", "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
 
-		wdt@18009000 {
-			 compatible = "arm,sp805" , "arm,primecell";
-			 reg = <0x18009000 0x1000>;
-			 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			 clocks = <&axi81_clk>;
-			 clock-names = "apb_pclk";
+		pcie_phy: phy@0301d0a0 {
+			compatible = "brcm,cygnus-pcie-phy";
+			reg = <0x0301d0a0 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie0_phy: phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
 		};
-	};
 
-	i2c0: i2c@18008000 {
-		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-		reg = <0x18008000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
+		pinctrl: pinctrl@0x0301d0c8 {
+			compatible = "brcm,cygnus-pinmux";
+			reg = <0x0301d0c8 0x30>,
+			      <0x0301d24c 0x2c>;
+		};
 
-	i2c1: i2c@1800b000 {
-		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-		reg = <0x1800b000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
+		gpio_crmu: gpio@03024800 {
+			compatible = "brcm,cygnus-crmu-gpio";
+			reg = <0x03024800 0x50>,
+			      <0x03024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
 
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
+		i2c0: i2c@18008000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x18008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+		wdt0: wdt@18009000 {
+			compatible = "arm,sp805" , "arm,primecell";
+			reg = <0x18009000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-names = "apb_pclk";
+		};
 
-		linux,pci-domain = <0>;
+		gpio_ccm: gpio@1800a000 {
+			compatible = "brcm,cygnus-ccm-gpio";
+			reg = <0x1800a000 0x50>,
+			      <0x0301d164 0x20>;
+			ngpios = <24>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+		};
 
-		bus-range = <0x00 0xff>;
+		i2c1: i2c@1800b000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x1800b000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+		pcie0: pcie@18012000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18012000 0x1000>;
 
-		status = "disabled";
-	};
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
 
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
+			linux,pci-domain = <0>;
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+			bus-range = <0x00 0xff>;
 
-		linux,pci-domain = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
+				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
-		bus-range = <0x00 0xff>;
+			phys = <&pcie0_phy>;
+			phy-names = "pcie-phy";
 
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			status = "disabled";
 
-		status = "disabled";
-	};
+			msi-parent = <&msi0>;
+			msi0: msi@18012000 {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+					     <GIC_SPI 97 IRQ_TYPE_NONE>,
+					     <GIC_SPI 98 IRQ_TYPE_NONE>,
+					     <GIC_SPI 99 IRQ_TYPE_NONE>;
+			};
+		};
 
-	uart0: serial@18020000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18020000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+		pcie1: pcie@18013000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18013000 0x1000>;
 
-	uart1: serial@18021000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18021000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
 
-	uart2: serial@18022000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18020000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			linux,pci-domain = <1>;
 
-	uart3: serial@18023000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18023000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			bus-range = <0x00 0xff>;
 
-	nand: nand@18046000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
+				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
-		#address-cells = <1>;
-		#size-cells = <0>;
+			phys = <&pcie1_phy>;
+			phy-names = "pcie-phy";
 
-		brcm,nand-has-wp;
-	};
+			status = "disabled";
 
-	gic: interrupt-controller@19021000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x19021000 0x1000>,
-		      <0x19020100 0x100>;
-	};
+			msi-parent = <&msi1>;
+			msi1: msi@18013000 {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
+					     <GIC_SPI 103 IRQ_TYPE_NONE>,
+					     <GIC_SPI 104 IRQ_TYPE_NONE>,
+					     <GIC_SPI 105 IRQ_TYPE_NONE>;
+			};
+		};
 
-	L2: l2-cache {
-		compatible = "arm,pl310-cache";
-		reg = <0x19022000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
+		uart0: serial@18020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
 
-	timer@19020200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x19020200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&periph_clk>;
-	};
+		uart1: serial@18021000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18021000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@18022000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@18023000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18023000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		nand: nand@18046000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+			      <0x18046f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
 
+			brcm,nand-has-wp;
+		};
+
+		gpio_asiu: gpio@180a5000 {
+			compatible = "brcm,cygnus-asiu-gpio";
+			reg = <0x180a5000 0x668>;
+			ngpios = <146>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			interrupt-controller;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 42 1>,
+					<&pinctrl 1 44 3>,
+					<&pinctrl 4 48 1>,
+					<&pinctrl 5 50 3>,
+					<&pinctrl 8 126 1>,
+					<&pinctrl 9 155 1>,
+					<&pinctrl 10 152 1>,
+					<&pinctrl 11 154 1>,
+					<&pinctrl 12 153 1>,
+					<&pinctrl 13 127 3>,
+					<&pinctrl 16 140 1>,
+					<&pinctrl 17 145 7>,
+					<&pinctrl 24 130 10>,
+					<&pinctrl 34 141 4>,
+					<&pinctrl 38 54 1>,
+					<&pinctrl 39 56 3>,
+					<&pinctrl 42 60 3>,
+					<&pinctrl 45 64 3>,
+					<&pinctrl 48 68 2>,
+					<&pinctrl 50 84 6>,
+					<&pinctrl 56 94 6>,
+					<&pinctrl 62 72 1>,
+					<&pinctrl 63 70 1>,
+					<&pinctrl 64 80 1>,
+					<&pinctrl 65 74 3>,
+					<&pinctrl 68 78 1>,
+					<&pinctrl 69 82 1>,
+					<&pinctrl 70 156 17>,
+					<&pinctrl 87 104 12>,
+					<&pinctrl 99 102 2>,
+					<&pinctrl 101 90 4>,
+					<&pinctrl 105 116 6>,
+					<&pinctrl 111 100 2>,
+					<&pinctrl 113 122 4>,
+					<&pinctrl 123 11 1>,
+					<&pinctrl 124 38 4>,
+					<&pinctrl 128 43 1>,
+					<&pinctrl 129 47 1>,
+					<&pinctrl 130 49 1>,
+					<&pinctrl 131 53 1>,
+					<&pinctrl 132 55 1>,
+					<&pinctrl 133 59 1>,
+					<&pinctrl 134 63 1>,
+					<&pinctrl 135 67 1>,
+					<&pinctrl 136 71 1>,
+					<&pinctrl 137 73 1>,
+					<&pinctrl 138 77 1>,
+					<&pinctrl 139 79 1>,
+					<&pinctrl 140 81 1>,
+					<&pinctrl 141 83 1>,
+					<&pinctrl 142 10 1>;
+		};
+
+		touchscreen: tsc@180a6000 {
+			compatible = "brcm,iproc-touchscreen";
+			reg = <0x180a6000 0x40>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
new file mode 100644
index 000000000000..def9e783b5c6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -0,0 +1,342 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,nsp";
+	model = "Broadcom Northstar Plus SoC";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			enable-method = "brcm,bcm-nsp-smp";
+			secondary-boot-reg = <0xffff042c>;
+			reg = <0x1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@00000 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011ba08>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpioa: gpio@0020 {
+			compatible = "brcm,nsp-gpio-a";
+			reg = <0x0020 0x70>,
+			      <0x3f1c4 0x1c>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <32>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+
+		uart0: serial@0300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@0400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		nand: nand@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x026000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+		};
+
+		watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdogclk", "apb_pclk";
+		};
+
+		lcpll0: lcpll0@3f100 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-lcpll0";
+			reg = <0x3f100 0x14>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "pcie_phy", "sdio",
+					     "ddr_phy";
+		};
+
+		genpll: genpll@3f140 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-genpll";
+			reg = <0x3f140 0x24>;
+			clocks = <&osc>;
+			clock-output-names = "genpll", "phy", "ethernetclk",
+					     "usbclk", "iprocfast", "sata1",
+					     "sata2";
+		};
+
+		pinctrl: pinctrl@3f1c0 {
+			compatible = "brcm,nsp-pinmux";
+			reg = <0x3f1c0 0x04>,
+			      <0x30028 0x04>,
+			      <0x3f408 0x04>;
+		};
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		status = "disabled";
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		status = "disabled";
+	};
+
+	pcie2: pcie@18014000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18014000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <2>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 2ddaa5136611..3dc7a8cc5812 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -31,7 +31,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x3500417c>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -42,6 +41,7 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			secondary-boot-reg = <0x3500417c>;
 			reg = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 2016b72a8fb7..3f525be28fd0 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -31,7 +31,6 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x35004178>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -42,6 +41,7 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			secondary-boot-reg = <0x35004178>;
 			reg = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
new file mode 100644
index 000000000000..228614ffff44
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,31 @@
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
new file mode 100644
index 000000000000..ddbbbbd42dda
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a", "brcm,bcm2835";
+	model = "Raspberry Pi Model A";
+
+	leds {
+		act {
+			gpios = <&gpio 16 1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 668442b1bda5..ef5405025223 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -1,4 +1,5 @@
 /dts-v1/;
+#include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 000000000000..86f1f2f598a7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	leds {
+		act {
+			gpios = <&gpio 16 1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index ee89b79426cf..4859e9d81b23 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -1,4 +1,5 @@
 /dts-v1/;
+#include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
 
 / {
@@ -13,11 +14,5 @@
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
-
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
+	pinctrl-0 = <&gpioout &alt0 &alt3>;
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index ab5474e5d1c8..76bdbcafab18 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,4 +1,4 @@
-#include "bcm2835.dtsi"
+#include <dt-bindings/power/raspberrypi-power.h>
 
 / {
 	memory {
@@ -20,6 +20,12 @@
 			compatible = "raspberrypi,bcm2835-firmware";
 			mboxes = <&mailbox>;
 		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
 	};
 };
 
@@ -52,7 +58,19 @@
 	clock-frequency = <100000>;
 };
 
+&i2c2 {
+	status = "okay";
+};
+
 &sdhci {
 	status = "okay";
 	bus-width = <4>;
 };
+
+&pwm {
+	status = "okay";
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 301c73f4ca33..b83b32639358 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,192 +1,14 @@
-#include <dt-bindings/pinctrl/bcm2835.h>
-#include "skeleton.dtsi"
+#include "bcm283x.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	interrupt-parent = <&intc>;
-
-	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
-	};
 
 	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 		dma-ranges = <0x40000000 0x00000000 0x20000000>;
 
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			clock-frequency = <1000000>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     <1 27>,
-				     <1 28>;
-
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm-wdt";
-			reg = <0x7e100000 0x28>;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-		};
-
-		mailbox: mailbox@7e00b800 {
-			compatible = "brcm,bcm2835-mbox";
-			reg = <0x7e00b880 0x40>;
-			interrupts = <0 1>;
-			#mbox-cells = <0>;
-		};
-
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
-			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart@7e201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
-
-			dmas = <&dma 2>,
-			       <&dma 3>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
-			interrupts = <2 22>;
-			clocks = <&clk_spi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7e205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sdhci: sdhci@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-		};
-
 		arm-pmu {
 			compatible = "arm,arm1176-pmu";
 		};
 	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk_mmc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc";
-			clock-frequency = <100000000>;
-		};
-
-		clk_i2c: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-output-names = "i2c";
-			clock-frequency = <250000000>;
-		};
-
-		clk_spi: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-output-names = "spi";
-			clock-frequency = <250000000>;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
new file mode 100644
index 000000000000..ff946661bd13
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -0,0 +1,35 @@
+/dts-v1/;
+#include "bcm2836.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
new file mode 100644
index 000000000000..9d0651d8f373
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -0,0 +1,78 @@
+#include "bcm283x.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&local_intc>;
+		};
+
+		arm-pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupt-parent = <&local_intc>;
+			interrupts = <9>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0>, // PHYS_SECURE_PPI
+			     <1>, // PHYS_NONSECURE_PPI
+			     <3>, // VIRT_PPI
+			     <2>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8>;
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
new file mode 100644
index 000000000000..8aaf193711bf
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -0,0 +1,251 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include "skeleton.dtsi"
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+
+	chosen {
+		bootargs = "earlyprintk console=ttyAMA0";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     <1 27>,
+				     <1 28>;
+
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm-wdt";
+			reg = <0x7e100000 0x28>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives everything from the platform's
+			 * oscillator.
+			 */
+			clocks = <&clk_osc>;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+		};
+
+		mailbox: mailbox@7e00b800 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x20>,
+			      <0x7e101098 0x02>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x1000>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		aux: aux@0x7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		sdhci: sdhci@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clock@3 {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 64b8d10ccff8..ca92bba6a8c5 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -24,6 +24,17 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	axi@18000000 {
+		usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index 31141e83fedd..eed4dd159995 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -15,6 +15,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "brcm,bcm-nsp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -27,6 +28,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
+			secondary-boot-reg = <0xffff0400>;
 			reg = <0x1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index aedf3c426e1f..8ade7def2e8a 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
new file mode 100644
index 000000000000..a22ed144040b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -0,0 +1,106 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R7000";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 446c586cd473..b52927c94e35 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -50,6 +50,36 @@
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
+
+		wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 000000000000..6c83538bc2d7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,111 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nand: nand@18028000 {
+		nandcs@0 {
+			partition@0 {
+				label = "firmware";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	clock-frequency = <125000000>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 6f50f672efbd..65a1309bd6e2 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -8,6 +8,7 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <dt-bindings/clock/bcm-nsp.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -27,7 +28,7 @@
 			compatible = "ns16550";
 			reg = <0x0300 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
+			clocks = <&iprocslow>;
 			status = "disabled";
 		};
 
@@ -35,48 +36,55 @@
 			compatible = "ns16550";
 			reg = <0x0400 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
+			clocks = <&iprocslow>;
 			status = "disabled";
 		};
 	};
 
 	mpcore {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x19020000 0x00003000>;
+		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		scu@0000 {
+		a9pll: arm_clk@00000 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		scu@20000 {
 			compatible = "arm,cortex-a9-scu";
-			reg = <0x0000 0x100>;
+			reg = <0x20000 0x100>;
 		};
 
-		timer@0200 {
+		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0200 0x100>;
+			reg = <0x20200 0x100>;
 			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
+			clocks = <&periph_clk>;
 		};
 
-		local-timer@0600 {
+		local-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0600 0x100>;
+			reg = <0x20600 0x100>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
+			clocks = <&periph_clk>;
 		};
 
-		gic: interrupt-controller@1000 {
+		gic: interrupt-controller@21000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x0100 0x100>;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
 		};
 
-		L2: cache-controller@2000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
-			reg = <0x2000 0x1000>;
+			reg = <0x22000 0x1000>;
 			cache-unified;
 			arm,shared-override;
 			prefetch-data = <1>;
@@ -94,14 +102,37 @@
 
 	clocks {
 		#address-cells = <1>;
-		#size-cells = <0>;
+		#size-cells = <1>;
+		ranges;
 
-		/* As long as we do not have a real clock driver us this
-		 * fixed clock */
-		clk_periph: periph {
+		osc: oscillator {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
 			#clock-cells = <0>;
-			clock-frequency = <400000000>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
 		};
 	};
 
@@ -178,6 +209,25 @@
 		};
 	};
 
+	lcpll0: lcpll0@1800c100 {
+		#clock-cells = <1>;
+		compatible = "brcm,nsp-lcpll0";
+		reg = <0x1800c100 0x14>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "sdio",
+				     "ddr_phy";
+	};
+
+	genpll: genpll@1800c140 {
+		#clock-cells = <1>;
+		compatible = "brcm,nsp-genpll";
+		reg = <0x1800c140 0x24>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "phy", "ethernetclk",
+				     "usbclk", "iprocfast", "sata1",
+				     "sata2";
+	};
+
 	nand: nand@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 34cd64051250..d0560e8cd6de 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -43,18 +43,31 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		arm_timer_clk: arm_timer_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <500000000>;
-		};
-
+		/* UBUS peripheral clock */
 		periph_clk: periph_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <50000000>;
 			clock-output-names = "periph";
 		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
 	};
 
 	/* ARM bus */
@@ -93,14 +106,14 @@
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x1e200 0x20>;
 			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&arm_timer_clk>;
+			clocks = <&axi_clk>;
 		};
 
 		local_timer: local-timer@1e600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x1e600 0x20>;
 			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&arm_timer_clk>;
+			clocks = <&axi_clk>;
 		};
 
 		twd_watchdog: watchdog@1e620 {
@@ -109,6 +122,13 @@
 			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		armpll: armpll {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
 		pmb0: reset-controller@4800c0 {
 			compatible = "brcm,bcm63138-pmb";
 			reg = <0x4800c0 0x10>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 3b6b17560687..4791321969b3 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -143,6 +143,12 @@
 			brcm,irq-can-wake;
 		};
 
+		aon-ctrl@410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
 		nand: nand@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
@@ -219,6 +225,84 @@
 
 	};
 
+	memory_controllers {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@1 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@2 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram@ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
+	};
+
 	smpboot {
 		compatible = "brcm,brcmstb-smpboot";
 		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 7db484323fd6..8b3800f46288 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -39,19 +39,11 @@
 	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
 	compatible = "brcm,bcm11360", "brcm,cygnus";
 
-	aliases {
-		serial0 = &uart3;
-	};
-
 	chosen {
 		stdout-path = &uart3;
 		bootargs = "console=ttyS0,115200";
 	};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -64,3 +56,23 @@
 		};
 	};
 };
+
+&uart3 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
index 9658d4f62d59..091c73a46e08 100644
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ b/arch/arm/boot/dts/bcm911360k.dts
@@ -43,11 +43,10 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
+&uart3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
new file mode 100644
index 000000000000..251a486f2da6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -0,0 +1,56 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94708)";
+	compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
new file mode 100644
index 000000000000..b16cac92904f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -0,0 +1,56 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94709)";
+	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
new file mode 100644
index 000000000000..05a985a20378
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -0,0 +1,63 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM953012K)";
+	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&uart0 {
+	clock-frequency = <62499840>;
+	status = "okay";
+};
+
+&uart1 {
+	clock-frequency = <62499840>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index 2f63052f9d48..b4a1392bd5a6 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
 
 / {
 	model = "Cygnus SVK (BCM958300K)";
@@ -43,35 +44,34 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	pcie0: pcie@18012000 {
-		status = "okay";
-	};
+&pcie0 {
+	status = "okay";
+};
 
-	pcie1: pcie@18013000 {
-		status = "okay";
-	};
+&pcie1 {
+	status = "okay";
+};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
+&uart3 {
+	status = "okay";
+};
 
-	nand: nand@18046000 {
-		nandcs@1 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			nand-on-flash-bbt;
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-			nand-ecc-strength = <24>;
-			nand-ecc-step-size = <1024>;
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
 
-			brcm,nand-oob-sector-size = <27>;
-		};
+		brcm,nand-oob-sector-size = <27>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 56b429abbedb..3378683321d3 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
 
 / {
 	model = "Cygnus Wireless Audio (BCM958305K)";
@@ -43,11 +44,42 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
 
-	uart3: serial@18023000 {
-		status = "okay";
+		brcm,nand-oob-sector-size = <27>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
new file mode 100644
index 000000000000..e298450b49b2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -0,0 +1,116 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625K)";
+	compatible = "brcm,bcm58625", "brcm,nsp";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@1 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@2 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@3 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi
new file mode 100644
index 000000000000..65397c088335
--- /dev/null
+++ b/arch/arm/boot/dts/bcm9hmidc.dtsi
@@ -0,0 +1,42 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Broadcom human machine interface daughter card (bcm9hmidc) installed on
+ * bcm958300k/bcm958305k boards
+ */
+
+&touchscreen {
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index 5c99fb3a4d10..3c0907b87fd6 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -45,7 +45,8 @@
 	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index ef811de09908..ae81009741ff 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -47,6 +47,12 @@
 	model = "Marvell Armada 1500 (BG2) SoC";
 	compatible = "marvell,berlin2", "marvell,berlin";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -57,6 +63,16 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
 		cpu@1 {
@@ -404,6 +420,13 @@
 			};
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -412,6 +435,29 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 772165ad0a52..8ba8b50ce997 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -46,7 +46,8 @@
 	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 900213d78a32..6d06b6118d83 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -47,6 +47,11 @@
 	model = "Marvell Armada 1500-mini (BG2CD) SoC";
 	compatible = "marvell,berlin2cd", "marvell,berlin";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -56,6 +61,14 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				800000  1200000
+				600000  1200000
+			>;
 		};
 	};
 
@@ -368,6 +381,13 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -376,6 +396,29 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 4a749e5b3b44..33b28757b8f6 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -49,7 +49,8 @@
 	};
 
 	choosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	regulators {
@@ -83,17 +84,49 @@
 			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
+
+		reg_sdio1_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vmmc";
+			enable-active-high;
+			regulator-boot-on;
+			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_sdio1_vqmmc: regulator@4 {
+			compatible = "regulator-gpio";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vqmmc";
+			regulator-type = "voltage";
+			enable-active-high;
+			gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+			states = <3300000 0x1
+				  1800000 0x0>;
+		};
+	};
+};
+
+&soc_pinctrl {
+	sd1gpio_pmux: sd1pwr-pmux {
+		groups = "G23", "G32";
+		function = "gpio";
 	};
 };
 
 &sdhci1 {
-	broken-cd;
-	sdhci,wp-inverted;
+	vmmc-supply = <&reg_sdio1_vmmc>;
+	vqmmc-supply = <&reg_sdio1_vqmmc>;
+	cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
 &sdhci2 {
-	broken-cd;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index d4dbd28d348c..2c34bfb13632 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -43,6 +43,11 @@
 	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
 	compatible = "marvell,berlin2q", "marvell,berlin";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -53,6 +58,17 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
 		cpu@1 {
@@ -102,7 +118,8 @@
 		sdhci0: sdhci@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -110,7 +127,8 @@
 		sdhci1: sdhci@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -119,7 +137,7 @@
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
 			clock-names = "io", "core";
 			status = "disabled";
 		};
@@ -293,7 +311,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1400 0x100>;
-				interrupt-parent = <&aic>;
 				interrupts = <4>;
 				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi0_pmux>;
@@ -306,7 +323,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1800 0x100>;
-				interrupt-parent = <&aic>;
 				interrupts = <5>;
 				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi1_pmux>;
@@ -401,6 +417,11 @@
 			soc_pinctrl: pin-controller {
 				compatible = "marvell,berlin2q-soc-pinctrl";
 
+				sd1_pmux: sd1-pmux {
+					groups = "G31";
+					function = "sd1";
+				};
+
 				twsi0_pmux: twsi0-pmux {
 					groups = "G6";
 					function = "twsi0";
@@ -477,6 +498,13 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -485,6 +513,29 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
@@ -505,7 +556,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x7000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <6>;
 				clocks = <&refclk>;
 				pinctrl-0 = <&twsi2_pmux>;
@@ -518,7 +568,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x8000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <7>;
 				clocks = <&refclk>;
 				pinctrl-0 = <&twsi3_pmux>;
@@ -529,7 +578,6 @@
 			uart0: uart@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <8>;
 				clocks = <&refclk>;
 				reg-shift = <2>;
@@ -541,7 +589,6 @@
 			uart1: uart@a000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0xa000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <9>;
 				clocks = <&refclk>;
 				reg-shift = <2>;
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
new file mode 100644
index 000000000000..93d7e235bc80
--- /dev/null
+++ b/arch/arm/boot/dts/compulab-sb-som.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "CompuLab SB-SOM";
+	compatible = "compulab,sb-som";
+
+	vsb_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsb_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	lcd0: display {
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	hdmi_conn: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+	};
+};
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 4e42f30cb318..c0451051777e 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -55,6 +55,7 @@
 			MATRIX_KEY(0x03, 0x04, KEY_F5)
 			MATRIX_KEY(0x03, 0x06, KEY_6)
 			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+			MATRIX_KEY(0x03, 0x09, KEY_F13)
 			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
 			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
 
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index df4c6f1f93f9..a5a23c376418 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -95,6 +95,13 @@
 		timeout-sec = <15>;
 	};
 
+	pinctrl: pinctrl@f0000e20 {
+		compatible = "cnxt,cx92755-pinctrl";
+		reg = <0xf0000e20 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	uc_regs: syscon@f00003a0 {
 		compatible = "cnxt,cx92755-uc", "syscon";
 		reg = <0xf00003a0 0x10>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
index 5da00806c41e..026f556c8c50 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -70,8 +70,17 @@
 
 &uart0 {
 	status = "okay";
+	pinctrl-0 = <&uart0_default>;
+	pinctrl-names = "default";
 };
 
 &i2c {
 	status = "okay";
 };
+
+&pinctrl {
+	uart0_default: uart0_active {
+		pins = "GP_O0", "GP_O1";
+		function = "client_b";
+	};
+};
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index e750ab9086d5..645549e14237 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -28,3 +28,11 @@
 		};
 	};
 };
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 4f935ad9f27b..ef061e9a2315 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -242,3 +242,11 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 0bd98cd00816..226cda76e77c 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -151,10 +151,44 @@
 
 		};
 		edma0: edma@01c00000 {
-			compatible = "ti,edma3";
-			reg =	<0x0 0x10000>;
-			interrupts = <11 13 12>;
-			#dma-cells = <1>;
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
+			reg =	<0x0 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <11 12>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+		};
+		edma0_tptc0: tptc@01c08000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8000 0x400>;
+			interrupts = <13>;
+			interrupt-names = "edm3_tcerrint";
+		};
+		edma0_tptc1: tptc@01c08400 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x8400 0x400>;
+			interrupts = <32>;
+			interrupt-names = "edm3_tcerrint";
+		};
+		edma1: edma@01e30000 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
+			reg =	<0x230000 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <93 94>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma1_tptc0 7>;
+		};
+		edma1_tptc0: tptc@01e38000 {
+			compatible = "ti,edma3-tptc";
+			reg =	<0x238000 0x400>;
+			interrupts = <95>;
+			interrupt-names = "edm3_tcerrint";
 		};
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
@@ -201,6 +235,16 @@
 			compatible = "ti,da830-mmc";
 			reg = <0x40000 0x1000>;
 			interrupts = <16>;
+			dmas = <&edma0 16 0>, <&edma0 17 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		mmc1: mmc@1e1b000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x21b000 0x1000>;
+			interrupts = <72>;
+			dmas = <&edma1 28 0>, <&edma1 29 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 		ehrpwm0: ehrpwm@01f00000 {
@@ -241,6 +285,8 @@
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <1>;
 			interrupts = <56>;
+			dmas = <&edma0 18 0>, <&edma0 19 0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 		mdio: mdio@1e24000 {
@@ -285,8 +331,8 @@
 			interrupts = <54>;
 			interrupt-names = "common";
 			status = "disabled";
-			dmas = <&edma0 1>,
-				<&edma0 0>;
+			dmas = <&edma0 1 1>,
+				<&edma0 0 1>;
 			dma-names = "tx", "rx";
 		};
 	};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index 109fd4711647..cbc17b0794b1 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "DM8148 EVM";
@@ -15,6 +16,14 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cpsw_emac0 {
@@ -26,3 +35,107 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii";
 };
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 79838dd8dee7..5d4313fd5a46 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -15,6 +15,24 @@
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;	/* 1 GB */
 	};
+
+	/* gpio9 seems to control USB VBUS regulator and/or hub power */
+	usb_power: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &cpsw_emac0 {
@@ -26,3 +44,55 @@
 	phy_id = <&davinci_mdio>, <1>;
 	phy-mode = "rgmii";
 };
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
+		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
+	dma-names = "tx", "rx";
+};
+
+&pincntl {
+	sd2_pins: pinmux_sd2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
+			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
+			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
+			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
+			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
+			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
+			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
+			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
+			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
+			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
+			DM814X_IOPAD(0x0920, PIN_INPUT | 40)	/* SD2_SDCD */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
index ef1e8e7a6cc6..e0ea6a93a22e 100644
--- a/arch/arm/boot/dts/dm814x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -4,25 +4,74 @@
  * published by the Free Software Foundation.
  */
 
+&pllss_clocks {
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x2e0>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x2e0>;
+	};
+
+	sysclk18_ck: sysclk18_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x02f0>;
+	};
+};
+
 &scm_clocks {
+	devosc_ck: devosc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0040>;
+	};
 
-	tclkin_ck: tclkin_ck {
+	/* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */
+	auxosc_ck: auxosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22572900>;
+	};
+
+	/* Optional 32768Hz crystal or clock on RTCOSC pins */
+	rtcosc_ck: rtcosc_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	devosc_ck: devosc_ck {
+	/* Optional external clock on TCLKIN pin, set rate in baord dts file */
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <20000000>;
 	};
 
-	/* Optional auxosc, 20 - 30 MHz range, assume 27 MHz by default */
-	auxosc_ck: auxosc_ck {
+	virt_19200000_ck: virt_19200000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
+		clock-frequency = <19200000>;
 	};
 
 	mpu_ck: mpu_ck {
@@ -49,12 +98,6 @@
 		clock-frequency = <48000000>;
 	};
 
-	sysclk18_ck: sysclk18_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
         cpsw_125mhz_gclk: cpsw_125mhz_gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -69,7 +112,31 @@
 
 };
 
-&pllss_clocks {
+&prcm_clocks {
+	osc_src_ck: osc_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mpu_clksrc_ck: mpu_clksrc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&devosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0040>;
+	};
+
+	/* Fixed divider clock 0.0016384 * devosc */
+	rtcdivider_ck: rtcdivider_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <128>;
+		clock-div = <78125>;
+	};
 
 	aud_clkin0_ck: aud_clkin0_ck {
 		#clock-cells = <0>;
@@ -88,22 +155,4 @@
 		compatible = "fixed-clock";
 		clock-frequency = <20000000>;
 	};
-
-	timer1_mux_ck: timer1_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-		ti,bit-shift = <3>;
-		reg = <0x2e0>;
-	};
-
-	timer2_mux_ck: timer2_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
-			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
-		ti,bit-shift = <6>;
-		reg = <0x2e0>;
-	};
 };
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 7988b42e5764..4a6ce8c8bf8f 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -5,7 +5,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/omap.h>
+#include <dt-bindings/pinctrl/dm814x.h>
 
 #include "skeleton.dtsi"
 
@@ -21,6 +21,10 @@
 		serial2 = &uart3;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
 	};
 
 	cpus {
@@ -57,9 +61,118 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@47402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+			};
+		};
+
 		/*
-		 * See TRM "Table 1-317. L4LS Instance Summary", just deduct
-		 * 0x1000 from the 1-317 addresses to get the device address
+		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
+		 * It shows the module target agent registers though, so the
+		 * actual device is typically 0x1000 before the target agent
+		 * except in cases where the module is larger than 0x1000.
 		 */
 		l4ls: l4ls@48000000 {
 			compatible = "ti,dm814-l4ls", "simple-bus";
@@ -124,8 +237,8 @@
 				interrupts = <65>;
 				ti,spi-num-cs = <4>;
 				ti,hwmods = "mcspi1";
-				dmas = <&edma 16 &edma 17
-					&edma 18 &edma 19>;
+				dmas = <&edma 16 0 &edma 17 0
+					&edma 18 0 &edma 19 0>;
 				dma-names = "tx0", "rx0", "tx1", "rx1";
 			};
 
@@ -143,7 +256,7 @@
 				reg = <0x20000 0x2000>;
 				clock-frequency = <48000000>;
 				interrupts = <72>;
-				dmas = <&edma 26 &edma 27>;
+				dmas = <&edma 26 0 &edma 27 0>;
 				dma-names = "tx", "rx";
 			};
 
@@ -153,7 +266,7 @@
 				reg = <0x22000 0x2000>;
 				clock-frequency = <48000000>;
 				interrupts = <73>;
-				dmas = <&edma 28 &edma 29>;
+				dmas = <&edma 28 0 &edma 29 0>;
 				dma-names = "tx", "rx";
 			};
 
@@ -163,7 +276,7 @@
 				reg = <0x24000 0x2000>;
 				clock-frequency = <48000000>;
 				interrupts = <74>;
-				dmas = <&edma 30 &edma 31>;
+				dmas = <&edma 30 0 &edma 31 0>;
 				dma-names = "tx", "rx";
 			};
 
@@ -181,12 +294,41 @@
 				ti,hwmods = "timer3";
 			};
 
+			mmc1: mmc@60000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc1";
+				dmas = <&edma 24 0
+					&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <64>;
+				interrupt-parent = <&intc>;
+				reg = <0x60000 0x1000>;
+			};
+
+			rtc: rtc@c0000 {
+				compatible = "ti,am3352-rtc", "ti,da830-rtc";
+				reg = <0xc0000 0x1000>;
+				interrupts = <75 76>;
+				ti,hwmods = "rtc";
+			};
+
+			mmc2: mmc@1d8000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc2";
+				dmas = <&edma 2 0
+					&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <28>;
+				interrupt-parent = <&intc>;
+				reg = <0x1d8000 0x1000>;
+			};
+
 			control: control@140000 {
 				compatible = "ti,dm814-scm", "simple-bus";
-				reg = <0x140000 0x16d000>;
+				reg = <0x140000 0x20000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 0x160000 0x16d000>;
+				ranges = <0 0x140000 0x20000>;
 
 				scm_conf: scm_conf@0 {
 					compatible = "syscon";
@@ -203,19 +345,52 @@
 					};
 				};
 
+				usb_ctrl_mod: control@620 {
+					compatible = "ti,am335x-usb-ctrl-module";
+					reg = <0x620 0x10
+						0x648 0x4>;
+					reg-names = "phy_ctrl", "wakeup";
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
+				/*
+				 * Note that silicon revision 2.1 and older
+				 * require input enabled (bit 18 set) for all
+				 * 3.3V I/Os to avoid cumulative hardware damage.
+				 * For more info, see errata advisory 2.1.87.
+				 * We leave bit 18 out of function-mask and rely
+				 * on the bootloader for it.
+				 */
 				pincntl: pinmux@800 {
 					compatible = "pinctrl-single";
-					reg = <0x800 0xc38>;
+					reg = <0x800 0x438>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x300ff>;
+					pinctrl-single,function-mask = <0x307ff>;
+				};
+
+				usb1_phy: usb-phy@1b00 {
+					compatible = "ti,am335x-usb-phy";
+					reg = <0x1b00 0x100>;
+					reg-names = "phy";
+					ti,ctrl_mod = <&usb_ctrl_mod>;
 				};
 			};
 
 			prcm: prcm@180000 {
 				compatible = "ti,dm814-prcm", "simple-bus";
-				reg = <0x180000 0x4000>;
+				reg = <0x180000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x180000 0x2000>;
 
 				prcm_clocks: clocks {
 					#address-cells = <1>;
@@ -226,9 +401,13 @@
 				};
 			};
 
+			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
 			pllss: pllss@1c5000 {
 				compatible = "ti,dm814-pllss", "simple-bus";
-				reg = <0x1c5000 0x2000>;
+				reg = <0x1c5000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1c5000 0x1000>;
 
 				pllss_clocks: clocks {
 					#address-cells = <1>;
@@ -254,13 +433,62 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		/* Board must configure evtmux with edma_xbar for EDMA */
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+		};
+
 		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
+			compatible = "ti,edma3-tpcc";
+			ti,hwmods = "tpcc";
+			reg =	<0x49000000 0x10000>;
+			reg-names = "edma3_cc";
 			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+			interrupt-names = "edma3_ccint", "emda3_mperr",
+					  "edma3_ccerrint";
+			dma-requests = <64>;
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+				   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+			ti,edma-memcpy-channels = <20 21>;
+		};
+
+		edma_tptc0: tptc@49800000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc0";
+			reg =	<0x49800000 0x100000>;
+			interrupts = <112>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc1: tptc@49900000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc1";
+			reg =	<0x49900000 0x100000>;
+			interrupts = <113>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc2: tptc@49a00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc2";
+			reg =	<0x49a00000 0x100000>;
+			interrupts = <114>;
+			interrupt-names = "edma3_tcerrint";
+		};
+
+		edma_tptc3: tptc@49b00000 {
+			compatible = "ti,edma3-tptc";
+			ti,hwmods = "tptc3";
+			reg =	<0x49b00000 0x100000>;
+			interrupts = <115>;
+			interrupt-names = "edma3_tcerrint";
 		};
 
 		/* See TRM "Table 1-318. L4HS Instance Summary" */
@@ -327,6 +555,20 @@
 				reg-names = "gmii-sel";
 			};
 		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 169a85578fc9..f50348bdd857 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "dm816x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "DM8168 EVM";
@@ -85,8 +86,12 @@
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		linux,mtd-name= "micron,mt29f2g16aadwp";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
@@ -106,12 +111,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		partition@0 {
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3c99cfa1a876..d9309a016117 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -64,7 +64,6 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		ti,hwmods = "l3_main";
 
 		prcm: prcm@48180000 {
 			compatible = "ti,dm816-prcm";
@@ -180,8 +179,12 @@
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <100>;
+			dmas = <&edma 52>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <6>;
 			gpmc,num-waitpins = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@48028000 {
@@ -213,11 +216,19 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		rtc: rtc@480c0000 {
+			compatible = "ti,am3352-rtc", "ti,da830-rtc";
+			reg = <0x480c0000 0x1000>;
+			interrupts = <75 76>;
+			ti,hwmods = "rtc";
+		};
+
 		mailbox: mailbox@480c8000 {
 			compatible = "ti,omap4-mailbox";
 			reg = <0x480c8000 0x2000>;
 			interrupts = <77>;
 			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
 			mbox_dsp: mbox_dsp {
@@ -226,6 +237,13 @@
 			};
 		};
 
+		spinbox: spinbox@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x2000>;
+			ti,hwmods = "spinbox";
+			#hwlock-cells = <1>;
+		};
+
 		mdio: mdio@4a100800 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
@@ -279,8 +297,11 @@
 			ti,spi-num-cs = <4>;
 			ti,hwmods = "mcspi1";
 			dmas = <&edma 16 &edma 17
-				&edma 18 &edma 19>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
+				&edma 18 &edma 19
+				&edma 20 &edma 21
+				&edma 22 &edma 23>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
 		};
 
 		mmc1: mmc@48060000 {
@@ -319,6 +340,7 @@
 			reg = <0x48044000 0x2000>;
 			interrupts = <92>;
 			ti,hwmods = "timer4";
+			ti,timer-pwm;
 		};
 
 		timer5: timer@48046000 {
@@ -326,6 +348,7 @@
 			reg = <0x48046000 0x2000>;
 			interrupts = <93>;
 			ti,hwmods = "timer5";
+			ti,timer-pwm;
 		};
 
 		timer6: timer@48048000 {
@@ -333,6 +356,7 @@
 			reg = <0x48048000 0x2000>;
 			interrupts = <94>;
 			ti,hwmods = "timer6";
+			ti,timer-pwm;
 		};
 
 		timer7: timer@4804a000 {
@@ -340,6 +364,7 @@
 			reg = <0x4804a000 0x2000>;
 			interrupts = <95>;
 			ti,hwmods = "timer7";
+			ti,timer-pwm;
 		};
 
 		uart1: uart@48020000 {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index e6fa251e17b9..af3cb633135f 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -62,6 +62,10 @@
 		pinctrl-0 = <&pmx_gpio_19>;
 		pinctrl-names = "default";
 	};
+
+	gpu-subsystem {
+		status = "okay";
+	};
 };
 
 &uart0 { status = "okay"; };
@@ -74,6 +78,10 @@
 	reg = <1>;
 };
 
+&gpu {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 179121630ad7..698d58cea20d 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -33,6 +33,12 @@
 		marvell,tauros2-cache-features = <0>;
 	};
 
+	gpu-subsystem {
+		compatible = "marvell,dove-gpu-subsystem";
+		cores = <&gpu>;
+		status = "disabled";
+	};
+
 	i2c-mux {
 		compatible = "i2c-mux-pinctrl";
 		#address-cells = <1>;
@@ -263,12 +269,13 @@
 			};
 
 			crypto: crypto-engine@30000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x30000 0x10000>,
-				      <0xffffe000 0x800>;
-				reg-names = "regs", "sram";
+				compatible = "marvell,dove-crypto";
+				reg = <0x30000 0x10000>;
+				reg-names = "regs";
 				interrupts = <31>;
 				clocks = <&gate_clk 15>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
 				status = "okay";
 			};
 
@@ -459,6 +466,12 @@
 					#clock-cells = <1>;
 				};
 
+				divider_clk: core-clock@0064 {
+					compatible = "marvell,dove-divider-clock";
+					reg = <0x0064 0x8>;
+					#clock-cells = <1>;
+				};
+
 				pinctrl: pin-ctrl@0200 {
 					compatible = "marvell,dove-pinctrl";
 					reg = <0x0200 0x14>,
@@ -767,6 +780,24 @@
 				interrupts = <47>;
 				status = "disabled";
 			};
+
+			crypto_sram: sa-sram@ffffe000 {
+				compatible = "mmio-sram";
+				reg = <0xffffe000 0x800>;
+				clocks = <&gate_clk 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			gpu: gpu@840000 {
+				clocks = <&divider_clk 1>;
+				clock-names = "core";
+				compatible = "vivante,gc";
+				interrupts = <48>;
+				power-domains = <&gpu_domain>;
+				reg = <0x840000 0x4000>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi
new file mode 100644
index 000000000000..6f98dc8df9dd
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-clocks.dtsi
@@ -0,0 +1,23 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dm814x-clocks.dtsi"
+
+/*
+ * Compared to dm814x, dra62x has different shifts and more mux options.
+ * Please add the extra options for ysclk_14 and 16 if really needed.
+ */
+&timer1_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <4>;
+};
+
+&timer2_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <8>;
+};
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
new file mode 100644
index 000000000000..f820573f4a4a
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -0,0 +1,138 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra62x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DRA62x J5 Eco EVM";
+	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+};
+
+/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "otg";
+};
+
+&usb1_phy {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
new file mode 100644
index 000000000000..d3cbb4ea35a8
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -0,0 +1,23 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "dm814x.dtsi"
+
+/ {
+	compatible = "ti,dra62x";
+};
+
+/* Compared to dm814x, dra62x has different offsets for Ethernet */
+&mac {
+	reg = <0x4a100000 0x800
+		0x4a101200 0x100>;
+};
+
+&davinci_mdio {
+	reg = <0x4a101000 0x100>;
+};
+
+#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 000000000000..1c39a8459b39
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     3>;
+
+	trips {
+		dspeve_crit: dspeve_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index a6c82e5b64fe..d9b87236019d 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -9,6 +9,8 @@
 
 #include "dra74x.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "TI DRA742";
@@ -16,7 +18,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x60000000>; /* 1536 MB */
+		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
 	};
 
 	evm_3v3_sd: fixedregulator-sd {
@@ -28,13 +30,22 @@
 		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
 	};
 
-	mmc2_3v3: fixedregulator-mmc2 {
+	evm_3v3_sw: fixedregulator-evm_3v3_sw {
 		compatible = "regulator-fixed";
-		regulator-name = "mmc2_3v3";
+		regulator-name = "evm_3v3_sw";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	extcon_usb1: extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
 		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
@@ -55,6 +66,86 @@
 		enable-active-high;
 		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "dra7:usr1";
+			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "dra7:usr2";
+			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "dra7:usr3";
+			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "dra7:usr4";
+			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		USER1 {
+			label = "btnUser1";
+			linux,code = <BTN_0>;
+			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+		};
+
+		USER2 {
+			label = "btnUser2";
+			linux,code = <BTN_1>;
+			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &dra7_pmx_core {
@@ -63,100 +154,100 @@
 
 	vtt_pin: pinmux_vtt_pin {
 		pinctrl-single,pins = <
-			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+			DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
-			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
+			DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
+			DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+			DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+			DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+			DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+			DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 		>;
 	};
 
 	mcspi2_pins: pinmux_mcspi2_pins {
 		pinctrl-single,pins = <
-			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
-			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+			DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+			DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
-			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
-			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
-			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+			DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+			DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
-			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
-			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
-			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 		>;
 	};
 
 	qspi1_pins: pinmux_qspi1_pins {
 		pinctrl-single,pins = <
-			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
-			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
-			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
-			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
+			DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
+			DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
+			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
+			DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
                 pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
                 >;
         };
 
 	usb2_pins: pinmux_usb2_pins {
                 pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
                 >;
         };
 
@@ -166,60 +257,60 @@
 		 * SW5.9 (GPMC_WPN) = LOW
 		 * SW5.1 (NAND_BOOTn) = HIGH */
 		pinctrl-single,pins = <
-			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
-			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
-			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
-			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
-			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
-			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
-			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
-			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
-			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
-			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
-			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
-			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
-			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
-			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
-			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
-			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
-			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
-			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
-			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
-			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
-			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
-			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
+			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
+			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
+			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
+			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
+			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
+			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
+			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
+			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
+			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
+			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
+			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
+			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
+			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
+			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
+			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
+			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
+			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
+			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
+			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
+			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
+			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
+			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
 
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
 		>;
 
 	};
@@ -227,60 +318,85 @@
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x250 (MUX_MODE15)
-			0x254 (MUX_MODE15)
-			0x258 (MUX_MODE15)
-			0x25c (MUX_MODE15)
-			0x260 (MUX_MODE15)
-			0x264 (MUX_MODE15)
-			0x268 (MUX_MODE15)
-			0x26c (MUX_MODE15)
-			0x270 (MUX_MODE15)
-			0x274 (MUX_MODE15)
-			0x278 (MUX_MODE15)
-			0x27c (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
 
 			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+
+	atl_pins: pinmux_atl_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+		>;
+	};
+
+	mcasp3_pins: pinmux_mcasp3_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
 		>;
 	};
 };
@@ -388,6 +504,7 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-always-on;
 					regulator-boot-on;
+					regulator-allow-bypass;
 				};
 
 				ldoln_reg: ldoln {
@@ -410,6 +527,17 @@
 		};
 	};
 
+	pcf_lcd: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	pcf_gpio_21: gpio@21 {
 		compatible = "ti,pcf8575";
 		reg = <0x21>;
@@ -422,6 +550,20 @@
 		#interrupt-cells = <2>;
 	};
 
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
 };
 
 &i2c2 {
@@ -429,6 +571,20 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
+
+	pcf_hdmi: gpio@26 {
+		compatible = "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
 };
 
 &i2c3 {
@@ -479,12 +635,12 @@
 	 * SDCD signal is not being used here - using the fact that GPIO mode
 	 * is always hardwired.
 	 */
-	cd-gpios = <&gpio6 27 0>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 };
 
 &mmc2 {
 	status = "okay";
-	vmmc-supply = <&mmc2_3v3>;
+	vmmc-supply = <&evm_3v3_sw>;
 	bus-width = <8>;
 };
 
@@ -585,9 +741,13 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x16>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
@@ -610,7 +770,6 @@
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
 		/* All SPL-* partitions are sized to minimal length
@@ -707,3 +866,62 @@
 	pinctrl-1 = <&dcan1_pins_sleep>;
 	pinctrl-2 = <&dcan1_pins_default>;
 };
+
+&atl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&atl_pins>;
+
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins>;
+	pinctrl-1 = <&mcasp3_sleep_pins>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
new file mode 100644
index 000000000000..dd74a5337d1f
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for DRA7x SoC IVA thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+iva_thermal: iva_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     4>;
+
+	trips {
+		iva_crit: iva_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8fedddc35999..13ac88279427 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -15,8 +15,8 @@
 #define MAX_SOURCES 400
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	compatible = "ti,dra7xx";
 	interrupt-parent = <&crossbar_mpu>;
@@ -41,6 +41,7 @@
 		ethernet1 = &cpsw_emac1;
 		d_can0 = &dcan1;
 		d_can1 = &dcan2;
+		spi0 = &qspi;
 	};
 
 	timer {
@@ -56,10 +57,10 @@
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
+		reg = <0x0 0x48211000 0x0 0x1000>,
+		      <0x0 0x48212000 0x0 0x1000>,
+		      <0x0 0x48214000 0x0 0x2000>,
+		      <0x0 0x48216000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		interrupt-parent = <&gic>;
 	};
@@ -68,7 +69,7 @@
 		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
+		reg = <0x0 0x48281000 0x0 0x1000>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -95,10 +96,10 @@
 		compatible = "ti,dra7-l3-noc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
 		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x1000000>,
-		      <0x45000000 0x1000>;
+		reg = <0x0 0x44000000 0x0 0x1000000>,
+		      <0x0 0x45000000 0x0 0x1000>;
 		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
 				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -155,6 +156,11 @@
 					compatible = "syscon";
 					reg = <0x1c04 0x0020>;
 				};
+
+				scm_conf_pcie: scm_conf@1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
 			};
 
 			cm_core_aon: cm_core_aon@5000 {
@@ -292,6 +298,11 @@
 				#thermal-sensor-cells = <1>;
 		};
 
+		dsp1_system: dsp_system@40d00000 {
+			compatible = "syscon";
+			reg = <0x40d00000 0x100>;
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -911,6 +922,46 @@
 			status = "disabled";
 		};
 
+		mmu0_dsp1: mmu@40d01000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d01000 0x100>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp1: mmu@40d02000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x40d02000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp1";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			status = "disabled";
+		};
+
+		mmu_ipu1: mmu@58882000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x58882000 0x100>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu1";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
+		mmu_ipu2: mmu@55082000 {
+			compatible = "ti,dra7-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu2";
+			#iommu-cells = <0>;
+			ti,iommu-bus-err-back;
+			status = "disabled";
+		};
+
 		abb_mpu: regulator-abb-mpu {
 			compatible = "ti,abb-v3";
 			regulator-name = "abb_mpu";
@@ -1108,8 +1159,10 @@
 
 		qspi: qspi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>;
-			reg-names = "qspi_base";
+			reg = <0x4b300000 0x100>,
+			      <0x5c000000 0x4000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			syscon-chipselects = <&scm_conf 0x558>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "qspi";
@@ -1120,14 +1173,6 @@
 			status = "disabled";
 		};
 
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
 		/* OCP2SCP3 */
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1142,7 +1187,7 @@
 				      <0x4A096400 0x64>, /* phy_tx */
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
+				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin1>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
 				syscon-pllreset = <&scm_conf 0x3fc>;
@@ -1154,16 +1199,18 @@
 				reg = <0x4a094000 0x80>, /* phy_rx */
 				      <0x4a094400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie1phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x1c>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy1_32khz>,
 					 <&optfclk_pciephy1_clk>,
 					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 			};
 
@@ -1172,16 +1219,18 @@
 				reg = <0x4a095000 0x80>, /* phy_rx */
 				      <0x4a095400 0x64>; /* phy_tx */
 				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie2phy>;
+				syscon-phy-power = <&scm_conf_pcie 0x20>;
+				syscon-pcs = <&scm_conf_pcie 0x10>;
 				clocks = <&dpll_pcie_ref_ck>,
 					 <&dpll_pcie_ref_m2ldo_ck>,
 					 <&optfclk_pciephy2_32khz>,
 					 <&optfclk_pciephy2_clk>,
 					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>;
+					 <&optfclk_pciephy_div>,
+					 <&sys_clkin1>;
 				clock-names = "dpll_ref", "dpll_ref_m2",
 					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
+					      "div-clk", "phy-div", "sysclk";
 				#phy-cells = <0>;
 				status = "disabled";
 			};
@@ -1197,23 +1246,6 @@
 			ti,hwmods = "sata";
 		};
 
-		omap_control_pcie1phy: control-phy@0x4a003c40 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		omap_control_pcie2phy: control-pcie@0x4a003c44 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-			status = "disabled";
-		};
-
 		rtc: rtc@48838000 {
 			compatible = "ti,am3352-rtc";
 			reg = <0x48838000 0x100>;
@@ -1223,24 +1255,6 @@
 			clocks = <&sys_32k_ck>;
 		};
 
-		omap_control_usb2phy1: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy1: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb2phy2: control-phy@0x4a002e74 {
-			compatible = "ti,control-phy-usb2-dra7";
-			reg = <0x4a002e74 0x4>;
-			reg-names = "power";
-		};
-
 		/* OCP2SCP1 */
 		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
@@ -1253,7 +1267,7 @@
 			usb2_phy1: phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x400>;
-				ctrl-module = <&omap_control_usb2phy1>;
+				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy1_always_on_clk32k>,
 					 <&usb_otg_ss1_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1262,9 +1276,10 @@
 			};
 
 			usb2_phy2: phy@4a085000 {
-				compatible = "ti,omap-usb2";
+				compatible = "ti,dra7x-usb2-phy2",
+					     "ti,omap-usb2";
 				reg = <0x4a085000 0x400>;
-				ctrl-module = <&omap_control_usb2phy2>;
+				syscon-phy-power = <&scm_conf 0xe74>;
 				clocks = <&usb_phy2_always_on_clk32k>,
 					 <&usb_otg_ss2_refclk960m>;
 				clock-names =	"wkupclk",
@@ -1278,7 +1293,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy1>;
+				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy3_always_on_clk32k>,
 					 <&sys_clkin1>,
 					 <&usb_otg_ss1_refclk960m>;
@@ -1309,7 +1324,6 @@
 						  "otg";
 				phys = <&usb2_phy1>, <&usb3_phy1>;
 				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1337,7 +1351,6 @@
 						  "otg";
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
-				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1365,7 +1378,6 @@
 				interrupt-names = "peripheral",
 						  "host",
 						  "otg";
-				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 				snps,dis_u3_susphy_quirk;
@@ -1390,6 +1402,8 @@
 			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			status = "disabled";
 		};
 
@@ -1404,6 +1418,21 @@
 			status = "disabled";
 		};
 
+		mcasp3: mcasp@48468000 {
+			compatible = "ti,dra7-mcasp-audio";
+			ti,hwmods = "mcasp3";
+			reg = <0x48468000 0x2000>;
+			reg-names = "mpu";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+			dma-names = "tx", "rx";
+			clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
+			clock-names = "fck", "ahclkx";
+			status = "disabled";
+		};
+
 		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
@@ -1437,6 +1466,16 @@
 			       0x48485200 0x2E00>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
 			/*
 			 * rx_thresh_pend
 			 * rx_pend
@@ -1540,6 +1579,8 @@
 		#include "omap4-cpu-thermal.dtsi"
 		#include "omap5-gpu-thermal.dtsi"
 		#include "omap5-core-thermal.dtsi"
+		#include "dra7-dspeve-thermal.dtsi"
+		#include "dra7-iva-thermal.dtsi"
 	};
 
 };
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 6f6bd98c98df..6affe2d137da 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -9,6 +9,7 @@
 
 #include "dra72x.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
 
 / {
 	model = "TI DRA722";
@@ -16,7 +17,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1024 MB */
+		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
 
 	aliases {
@@ -30,6 +31,15 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	evm_3v3_sd: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "evm_3v3_sd";
@@ -93,131 +103,197 @@
 			};
 		};
 	};
+
+	sound0: sound@0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
 };
 
 &dra7_pmx_core {
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
 		>;
 	};
 
 	i2c5_pins: pinmux_i2c5_pins {
 		pinctrl-single,pins = <
-			0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
 		>;
 	};
 
 	nand_default: nand_default {
 		pinctrl-single,pins = <
-			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
-			0x4	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
-			0x8	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
-			0xc	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
-			0x10	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
-			0x14	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
-			0x18	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
-			0x1c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
-			0x20	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
-			0x24	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
-			0x28	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
-			0x2c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
-			0x30	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
-			0x34	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
-			0x38	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
-			0x3c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
-			0xb4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
-			0xc4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
-			0xcc	(PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
-			0xc8	(PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
-			0xd0	(PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
-			0xd8	(PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
+			DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
+			DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
+			DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
+			DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
+			DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
+			DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
+			DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
+			DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
+			DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
+			DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
+			DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
+			DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
+			DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
+			DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
+			DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
+			DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
+			DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+			DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+			DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+			DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+			DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+			DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
 		>;
 	};
 
 	usb1_pins: pinmux_usb1_pins {
 		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 		>;
 	};
 
 	usb2_pins: pinmux_usb2_pins {
 		pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+			DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
 		>;
 	};
 
 	tps65917_pins_default: tps65917_pins_default {
 		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+			DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
 		>;
 	};
 
 	mmc1_pins_default: mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
 		>;
 	};
 
 	mmc2_pins_default: mmc2_pins_default {
 		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 
 	qspi1_pins: pinmux_qspi1_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x3474, PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
+			DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
 		>;
 	};
 
 	hdmi_pins: pinmux_hdmi_pins {
 		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+		>;
+	};
+
+	atl_pins: pinmux_atl_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)	/* xref_clk1.atl_clk1 */
+			DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)	/* xref_clk2.atl_clk2 */
+		>;
+	};
+
+	mcasp3_pins: pinmux_mcasp3_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15)
 		>;
 	};
 };
@@ -297,6 +373,7 @@
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 					regulator-boot-on;
+					regulator-allow-bypass;
 				};
 
 				ldo2_reg: ldo2 {
@@ -304,6 +381,7 @@
 					regulator-name = "ldo2";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
+					regulator-allow-bypass;
 				};
 
 				ldo3_reg: ldo3 {
@@ -353,12 +431,21 @@
 		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+	};
 
-		cpsw_sel_s0 {
-			gpio-hog;
-			gpios = <4 GPIO_ACTIVE_HIGH>;
-			output-low;
-		};
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3>;
+		IOVDD-supply = <&evm_3v3>;
+		DRVDD-supply = <&evm_3v3>;
+		DVDD-supply = <&aic_dvdd>;
 	};
 };
 
@@ -380,11 +467,21 @@
 		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
 		 */
 		lines-initial-states = <0x0f2b>;
+
+		p1 {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
 	};
 };
 
 &uart1 {
 	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
 };
 
 &elm {
@@ -395,13 +492,17 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_default>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
 		/* To use NAND, DIP switch SW5 must be set like so:
 		 * SW5.1 (NAND_SELn) = ON (LOW)
 		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
 		 */
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
@@ -424,7 +525,6 @@
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
 		/* All SPL-* partitions are sized to minimal length
@@ -514,7 +614,7 @@
 	 * SDCD signal is not being used here - using the fact that GPIO mode
 	 * is a viable alternative
 	 */
-	cd-gpios = <&gpio6 27 0>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 	max-frequency = <192000000>;
 };
 
@@ -534,18 +634,18 @@
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
 		>;
 
 	};
@@ -553,33 +653,33 @@
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+			DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
 		>;
 	};
 };
@@ -590,6 +690,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	slaves = <1>;
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
 };
 
 &cpsw_emac0 {
@@ -695,3 +796,59 @@
 		};
 	};
 };
+
+&atl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&atl_pins>;
+
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_gfclk_mux>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins>;
+	pinctrl-1 = <&mcasp3_sleep_pins>;
+
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index eaca143faa77..70a217050a4c 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -45,3 +45,24 @@
 		 <&dss_video1_clk>;
 	clock-names = "fck", "video1_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index feea98e0a4b5..4220eeffc65a 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -52,6 +52,11 @@
 	};
 
 	ocp {
+		dsp2_system: dsp_system@41500000 {
+			compatible = "syscon";
+			reg = <0x41500000 0x100>;
+		};
+
 		omap_dwc3_4: omap_dwc3_4@48940000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss4";
@@ -71,11 +76,30 @@
 				interrupt-names = "peripheral",
 						  "host",
 						  "otg";
-				tx-fifo-resize;
 				maximum-speed = "high-speed";
 				dr_mode = "otg";
 			};
 		};
+
+		mmu0_dsp2: mmu@41501000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41501000 0x100>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu0_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			status = "disabled";
+		};
+
+		mmu1_dsp2: mmu@41502000 {
+			compatible = "ti,dra7-dsp-iommu";
+			reg = <0x41502000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu1_dsp2";
+			#iommu-cells = <0>;
+			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+			status = "disabled";
+		};
 	};
 };
 
@@ -93,3 +117,29 @@
 		 <&dss_video2_clk>;
 	clock-names = "fck", "video1_clk", "video2_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 357bedeebfac..d0bae06b7eb7 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -2146,4 +2146,28 @@
 		ti,bit-shift = <0>;
 		reg = <0x558>;
 	};
+
+       ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <20>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <21>;
+		reg = <0x0558>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0558>;
+	};
 };
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
index a4ba31b23c88..a4a281fe82af 100644
--- a/arch/arm/boot/dts/ea3250.dts
+++ b/arch/arm/boot/dts/ea3250.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "lpc32xx.dtsi"
+#include "lpc32xx.dtsi"
 
 / {
 	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
@@ -22,7 +22,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x4000000>;
+		reg = <0x80000000 0x4000000>;
 	};
 
 	ahb {
@@ -31,19 +31,6 @@
 			use-iram;
 		};
 
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
 		/* 128MB Flash via SLC NAND controller */
 		slc: flash@20020000 {
 			status = "okay";
@@ -130,15 +117,6 @@
 				clock-frequency = <100000>;
 			};
 
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2d {
-					compatible = "nxp,isp1301";
-					reg = <0x2d>;
-				};
-			};
-
 			sd@20098000 {
 				wp-gpios = <&pca9532 5 0>;
 				cd-gpios = <&pca9532 4 0>;
@@ -279,3 +257,18 @@
 		};
 	};
 };
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2d {
+		compatible = "nxp,isp1301";
+		reg = <0x2d>;
+	};
+};
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
index b4031fa4a567..504cf45d3cb8 100644
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ b/arch/arm/boot/dts/efm32gg-dk3750.dts
@@ -26,7 +26,7 @@
 		};
 
 		i2c@4000a000 {
-			efm32,location = <3>;
+			energymicro,location = <3>;
 			status = "ok";
 
 			temp@48 {
@@ -43,7 +43,7 @@
 
 		spi0: spi@4000c000 { /* USART0 */
 			cs-gpios = <&gpio 68 1>; // E4
-			location = <1>;
+			energymicro,location = <1>;
 			status = "ok";
 
 			microsd@0 {
@@ -57,7 +57,7 @@
 
 		spi1: spi@4000c400 { /* USART1 */
 			cs-gpios = <&gpio 51 1>; // D3
-			location = <1>;
+			energymicro,location = <1>;
 			status = "ok";
 
 			ks8851@0 {
@@ -70,7 +70,7 @@
 		};
 
 		uart4: uart@4000e400 { /* UART1 */
-			location = <2>;
+			energymicro,location = <2>;
 			status = "ok";
 		};
 
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
index 106d505c5d3d..c747983771c7 100644
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ b/arch/arm/boot/dts/efm32gg.dtsi
@@ -23,7 +23,7 @@
 
 	soc {
 		adc: adc@40002000 {
-			compatible = "efm32,adc";
+			compatible = "energymicro,efm32-adc";
 			reg = <0x40002000 0x400>;
 			interrupts = <7>;
 			clocks = <&cmu clk_HFPERCLKADC0>;
@@ -31,7 +31,7 @@
 		};
 
 		gpio: gpio@40006000 {
-			compatible = "efm32,gpio";
+			compatible = "energymicro,efm32-gpio";
 			reg = <0x40006000 0x1000>;
 			interrupts = <1 11>;
 			gpio-controller;
@@ -45,7 +45,7 @@
 		i2c0: i2c@4000a000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,i2c";
+			compatible = "energymicro,efm32-i2c";
 			reg = <0x4000a000 0x400>;
 			interrupts = <9>;
 			clocks = <&cmu clk_HFPERCLKI2C0>;
@@ -56,7 +56,7 @@
 		i2c1: i2c@4000a400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,i2c";
+			compatible = "energymicro,efm32-i2c";
 			reg = <0x4000a400 0x400>;
 			interrupts = <10>;
 			clocks = <&cmu clk_HFPERCLKI2C1>;
@@ -67,7 +67,7 @@
 		spi0: spi@4000c000 { /* USART0 */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,spi";
+			compatible = "energymicro,efm32-spi";
 			reg = <0x4000c000 0x400>;
 			interrupts = <3 4>;
 			clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -77,7 +77,7 @@
 		spi1: spi@4000c400 { /* USART1 */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,spi";
+			compatible = "energymicro,efm32-spi";
 			reg = <0x4000c400 0x400>;
 			interrupts = <15 16>;
 			clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -87,7 +87,7 @@
 		spi2: spi@4000c800 { /* USART2 */
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "efm32,spi";
+			compatible = "energymicro,efm32-spi";
 			reg = <0x4000c800 0x400>;
 			interrupts = <18 19>;
 			clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -95,7 +95,7 @@
 		};
 
 		uart0: uart@4000c000 { /* USART0 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000c000 0x400>;
 			interrupts = <3 4>;
 			clocks = <&cmu clk_HFPERCLKUSART0>;
@@ -103,7 +103,7 @@
 		};
 
 		uart1: uart@4000c400 { /* USART1 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000c400 0x400>;
 			interrupts = <15 16>;
 			clocks = <&cmu clk_HFPERCLKUSART1>;
@@ -111,7 +111,7 @@
 		};
 
 		uart2: uart@4000c800 { /* USART2 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000c800 0x400>;
 			interrupts = <18 19>;
 			clocks = <&cmu clk_HFPERCLKUSART2>;
@@ -119,7 +119,7 @@
 		};
 
 		uart3: uart@4000e000 { /* UART0 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000e000 0x400>;
 			interrupts = <20 21>;
 			clocks = <&cmu clk_HFPERCLKUART0>;
@@ -127,7 +127,7 @@
 		};
 
 		uart4: uart@4000e400 { /* UART1 */
-			compatible = "efm32,uart";
+			compatible = "energymicro,efm32-uart";
 			reg = <0x4000e400 0x400>;
 			interrupts = <22 23>;
 			clocks = <&cmu clk_HFPERCLKUART1>;
@@ -135,28 +135,28 @@
 		};
 
 		timer0: timer@40010000 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010000 0x400>;
 			interrupts = <2>;
 			clocks = <&cmu clk_HFPERCLKTIMER0>;
 		};
 
 		timer1: timer@40010400 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010400 0x400>;
 			interrupts = <12>;
 			clocks = <&cmu clk_HFPERCLKTIMER1>;
 		};
 
 		timer2: timer@40010800 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010800 0x400>;
 			interrupts = <13>;
 			clocks = <&cmu clk_HFPERCLKTIMER2>;
 		};
 
 		timer3: timer@40010c00 {
-			compatible = "efm32,timer";
+			compatible = "energymicro,efm32-timer";
 			reg = <0x40010c00 0x400>;
 			interrupts = <14>;
 			clocks = <&cmu clk_HFPERCLKTIMER3>;
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index edad0c4eea35..bcce6f50c93d 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -44,7 +45,7 @@
 	};
 
 	gic: interrupt-controller@e0020000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		reg = <0xe0028000 0x1000>,
@@ -53,8 +54,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	clocks@e0110000 {
@@ -158,7 +159,7 @@
 	timer@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&sti_sclk>;
 		clock-names = "sclk";
 	};
@@ -166,7 +167,7 @@
 	uart0: serial@e1020000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1020000 0x38>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usia_u0_sclk>;
 		clock-names = "sclk";
 	};
@@ -174,7 +175,7 @@
 	uart1: serial@e1030000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1030000 0x38>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u1_sclk>;
 		clock-names = "sclk";
 	};
@@ -182,7 +183,7 @@
 	uart2: serial@e1040000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1040000 0x38>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u2_sclk>;
 		clock-names = "sclk";
 	};
@@ -190,7 +191,7 @@
 	uart3: serial@e1050000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1050000 0x38>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u3_sclk>;
 		clock-names = "sclk";
 	};
@@ -203,8 +204,8 @@
 	gpio0: gpio@e0050000 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
 		#gpio-cells = <2>;
@@ -215,8 +216,8 @@
 	gpio1: gpio@e0050080 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
 		#gpio-cells = <2>;
@@ -227,8 +228,8 @@
 	gpio2: gpio@e0050100 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
 		#gpio-cells = <2>;
@@ -239,8 +240,8 @@
 	gpio3: gpio@e0050180 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
 		#gpio-cells = <2>;
@@ -251,8 +252,8 @@
 	gpio4: gpio@e0050200 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 31>;
 		#gpio-cells = <2>;
@@ -266,7 +267,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-emev2";
 		reg = <0xe0070000 0x28>;
-		interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
 		clocks = <&iic0_sclk>;
 		clock-names = "sclk";
 		status = "disabled";
@@ -277,7 +278,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-emev2";
 		reg = <0xe10a0000 0x28>;
-		interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
 		clocks = <&iic1_sclk>;
 		clock-names = "sclk";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
new file mode 100644
index 000000000000..09a2040054ed
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	soc {
+		compatible = "simple-bus";
+
+		poweroff: syscon-poweroff {
+			compatible = "syscon-poweroff";
+			regmap = <&pmu_system_controller>;
+			offset = <0x330C>; /* PS_HOLD_CONTROL */
+			mask = <0x5200>; /* reset value */
+		};
+
+		reboot: syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pmu_system_controller>;
+			offset = <0x0400>; /* SWRESET */
+			mask = <0x1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 540a0adf2be6..9e2840b59ae8 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -43,7 +43,7 @@
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -52,13 +52,13 @@
 		regulator-name = "V_EMMC_2.8V-fixed";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 0>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -67,7 +67,7 @@
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 0>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
 			muic: max77836-muic {
 				compatible = "maxim,max77836-muic";
@@ -161,6 +161,7 @@
 };
 
 &exynos_usbphy {
+	vbus-supply = <&safeout_reg>;
 	status = "okay";
 };
 
@@ -184,7 +185,7 @@
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 0>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";
@@ -266,14 +267,14 @@
 				regulator-name = "V_EMMC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo12_reg: LDO12 {
 				regulator-name = "V_EMMC_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo13_reg: LDO13 {
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 41a5fafb9aa9..1f102f3a1ab1 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -43,13 +43,13 @@
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -58,7 +58,7 @@
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 0>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
 			muic: max77836-muic {
 				compatible = "maxim,max77836-muic";
@@ -153,6 +153,7 @@
 
 &exynos_usbphy {
 	status = "okay";
+	vbus-supply = <&safeout_reg>;
 };
 
 &hsotg {
@@ -188,8 +189,8 @@
 		reg = <0>;
 		vdd3-supply = <&ldo16_reg>;
 		vci-supply = <&ldo20_reg>;
-		reset-gpios = <&gpe0 1 0>;
-		te-gpios = <&gpx0 6 0>;
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <30>;
 		power-off-delay= <120>;
 		reset-delay = <5>;
@@ -245,7 +246,7 @@
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 0>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";
@@ -368,14 +369,14 @@
 				regulator-name = "V_EMMC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo12_reg: LDO12 {
 				regulator-name = "V_EMMC_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo13_reg: LDO13 {
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 033def482fc3..137f9015d4e8 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -19,6 +19,7 @@
 
 #include "skeleton.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
+#include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
 
 / {
@@ -333,7 +334,7 @@
 		};
 
 		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5250-dw-mshc";
+			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
 			interrupts = <0 142 0>;
 			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
@@ -345,7 +346,7 @@
 		};
 
 		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5250-dw-mshc";
+			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
 			interrupts = <0 143 0>;
 			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
@@ -367,7 +368,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 98c0a368b777..c679b3cc3c48 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -22,6 +22,7 @@
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
 #include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
@@ -76,6 +77,11 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	sromc@12570000 {
+		compatible = "samsung,exynos-srom";
+		reg = <0x12570000 0x14>;
+	};
+
 	mipi_phy: video-phy@10020710 {
 		compatible = "samsung,s5pv210-mipi-video-phy";
 		#phy-cells = <1>;
@@ -431,6 +437,8 @@
 		interrupts = <0 52 0>;
 		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma0 15>, <&pdma0 16>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -440,6 +448,8 @@
 		interrupts = <0 53 0>;
 		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma1 15>, <&pdma1 16>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -449,6 +459,8 @@
 		interrupts = <0 54 0>;
 		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma0 17>, <&pdma0 18>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -458,6 +470,8 @@
 		interrupts = <0 55 0>;
 		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 		clock-names = "uart", "clk_uart_baud0";
+		dmas = <&pdma1 17>, <&pdma1 18>;
+		dma-names = "rx", "tx";
 		status = "disabled";
 	};
 
@@ -639,7 +653,7 @@
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 
@@ -705,6 +719,15 @@
 		iommus = <&sysmmu_jpeg>;
 	};
 
+	rotator: rotator@12810000 {
+		compatible = "samsung,exynos4210-rotator";
+		reg = <0x12810000 0x64>;
+		interrupts = <0 83 0>;
+		clocks = <&clock CLK_ROTATOR>;
+		clock-names = "rotator";
+		iommus = <&sysmmu_rotator>;
+	};
+
 	hdmi: hdmi@12D00000 {
 		compatible = "samsung,exynos4210-hdmi";
 		reg = <0x12D00000 0x70000>;
@@ -932,7 +955,6 @@
 		interrupts = <5 0>;
 		clock-names = "sysmmu", "master";
 		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		power-domains = <&pd_lcd0>;
 		#iommu-cells = <0>;
 	};
 
@@ -946,4 +968,12 @@
 		power-domains = <&pd_lcd0>;
 		#iommu-cells = <0>;
 	};
+
+	prng: rng@10830400 {
+		compatible = "samsung,exynos4-rng";
+		reg = <0x10830400 0x200>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index e050d85cdacd..ad7394c1d67a 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -16,6 +16,7 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -45,7 +46,7 @@
 			regulator-name = "VMEM_VDD_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -57,44 +58,44 @@
 
 		up {
 			label = "Up";
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down {
 			label = "Down";
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "Back";
-			gpios = <&gpx1 7 1>;
+			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home {
 			label = "Home";
-			gpios = <&gpx1 6 1>;
+			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
 			label = "Menu";
-			gpios = <&gpx1 5 1>;
+			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 		status {
-			gpios = <&gpx1 3 1>;
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -137,10 +138,6 @@
 	status = "okay";
 };
 
-&g2d {
-	status = "okay";
-};
-
 &i2c_0 {
 	status = "okay";
 	samsung,i2c-sda-delay = <100>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 043b03caff8f..94ca7d36ab37 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -16,6 +16,7 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
@@ -43,10 +44,6 @@
 	};
 };
 
-&g2d {
-	status = "okay";
-};
-
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -69,7 +66,7 @@
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	status = "okay";
@@ -182,7 +179,7 @@
 };
 
 &spi_2 {
-	cs-gpios = <&gpc1 2 0>;
+	cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	w25x80@0 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index ba34886f8b65..1df2f0bc1d76 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Trats based on Exynos4210";
@@ -39,7 +40,7 @@
 			regulator-name = "VMEM_VDD_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
+			gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -48,7 +49,7 @@
 			regulator-name = "TSP_FIXED_VOLTAGES";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 0>;
+			gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -57,7 +58,7 @@
 			regulator-name = "8M_AF_2.8V_EN";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 0>;
+			gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -66,7 +67,7 @@
 			regulator-name = "CAM_IO_EN";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 0>;
+			gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -75,7 +76,7 @@
 			regulator-name = "8M_1.2V_EN";
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 0>;
+			gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -84,7 +85,7 @@
 			regulator-name = "VT_CORE_1.5V";
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 0>;
+			gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -93,29 +94,29 @@
 		compatible = "gpio-keys";
 
 		vol-down-key {
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		vol-up-key {
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		power-key {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <352>;
 			label = "ok";
 			debounce-interval = <10>;
@@ -218,7 +219,7 @@
 		compatible = "samsung,s6e8aa0";
 		vdd3-supply = <&vcclcd_reg>;
 		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 0>;
+		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
@@ -251,6 +252,7 @@
 
 &exynos_usbphy {
 	status = "okay";
+	vbus-supply = <&safe1_sreg>;
 };
 
 &fimd {
@@ -304,9 +306,9 @@
 		max8997,pmic-ignore-gpiodvs-side-effect;
 		max8997,pmic-buck125-default-dvs-idx = <0>;
 
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
-						 <&gpx0 6 0>,
-						 <&gpl0 0 0>;
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
 						 <1250000>, <1200000>,
@@ -448,7 +450,6 @@
 
 			safe1_sreg: ESAFEOUT1 {
 			     regulator-name = "SAFEOUT1";
-			     regulator-always-on;
 			};
 
 			safe2_sreg: ESAFEOUT2 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index eb379526e234..9a75e3effbc9 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
@@ -65,7 +66,7 @@
 		regulator-name = "VMEM_VDD_2_8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 0>;
+		gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
@@ -73,44 +74,44 @@
 		compatible = "gpio-keys";
 
 		vol-up-key {
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <1>;
 		};
 
 		vol-down-key {
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <1>;
 		};
 
 		config-key {
-			gpios = <&gpx2 2 1>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <171>;
 			label = "config";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		camera-key {
-			gpios = <&gpx2 3 1>;
+			gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <212>;
 			label = "camera";
 			debounce-interval = <1>;
 		};
 
 		power-key {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <352>;
 			label = "ok";
 			debounce-interval = <1>;
@@ -122,7 +123,7 @@
 		regulator-name = "TSP_2_8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 0>;
+		gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
@@ -131,17 +132,17 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpy3 1 0>;
-		gpio-mosi = <&gpy3 3 0>;
+		gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 0>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
 
 		lcd@0 {
 			compatible = "samsung,ld9040";
 			reg = <0>;
 			vdd3-supply = <&ldo7_reg>;
 			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 0>;
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 			spi-max-frequency = <1200000>;
 			spi-cpol;
 			spi-cpha;
@@ -218,13 +219,13 @@
 		regulator-name = "HDMI_5V";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpe0 1 0>;
+		gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 0 &gpe4 3 0>;
+		gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -248,6 +249,7 @@
 
 &exynos_usbphy {
 	status = "okay";
+	vbus-supply = <&safeout1_reg>;
 };
 
 &fimd {
@@ -267,7 +269,7 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	hdmi-en-supply = <&hdmi_en>;
@@ -311,7 +313,8 @@
 		compatible = "maxim,max8952";
 		reg = <0x60>;
 
-		max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+		max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+				    <&gpx0 4 GPIO_ACTIVE_HIGH>;
 		max8952,default-mode = <0>;
 		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
 						<1050000>, <950000>;
@@ -330,13 +333,13 @@
 		reg = <0x66>;
 
 		max8998,pmic-buck1-default-dvs-idx = <0>;
-		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-						<&gpx0 6 0>;
+		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						<&gpx0 6 GPIO_ACTIVE_HIGH>;
 		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
 						<1100000>, <1000000>;
 
 		max8998,pmic-buck2-default-dvs-idx = <0>;
-		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
 		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
 
 		regulators {
@@ -486,7 +489,6 @@
 
 			safeout1_reg: ESAFEOUT1 {
 				regulator-name = "SAFEOUT1";
-				regulator-always-on;
 			};
 
 			safeout2_reg: ESAFEOUT2 {
@@ -551,23 +553,31 @@
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
 	pinctrl-names = "default";
 	vmmc-supply = <&ldo5_reg>;
-	cd-gpios = <&gpx3 4 0>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";
 };
 
 &serial_0 {
 	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
 };
 
 &serial_1 {
 	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
 };
 
 &serial_2 {
 	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
 };
 
 &serial_3 {
 	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 3e5ba665d200..c1cb8df6da07 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -185,8 +185,8 @@
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		power-domains = <&pd_lcd0>;
 		iommus = <&sysmmu_g2d>;
-		status = "disabled";
 	};
 
 	camera {
@@ -271,6 +271,10 @@
 		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 };
 
+&mdma1 {
+	power-domains = <&pd_lcd0>;
+};
+
 &pmu_system_controller {
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";
@@ -279,3 +283,11 @@
 		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
 	#clock-cells = <1>;
 };
+
+&rotator {
+	power-domains = <&pd_lcd0>;
+};
+
+&sysmmu_rotator {
+	power-domains = <&pd_lcd0>;
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index db52841297a5..5e5d3fecb04c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/maxim,max77686.h>
 #include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	chosen {
@@ -30,11 +31,11 @@
 		power_key {
 			interrupt-parent = <&gpx1>;
 			interrupts = <3 0>;
-			gpios = <&gpx1 3 1>;
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -70,7 +71,7 @@
 		pinctrl-0 = <&sd1_cd>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpk1 2 1>;
+		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
 	};
 
 	camera {
@@ -176,12 +177,8 @@
 	assigned-clock-rates = <0>, <176000000>;
 };
 
-&g2d {
-	status = "okay";
-};
-
 &hdmi {
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	vdd-supply = <&ldo8_reg>;
@@ -199,8 +196,6 @@
 };
 
 &i2c_0 {
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <400000>;
 	status = "okay";
@@ -209,9 +204,9 @@
 		compatible = "smsc,usb3503";
 		reg = <0x08>;
 
-		intn-gpios = <&gpx3 0 0>;
-		connect-gpios = <&gpx3 4 0>;
-		reset-gpios = <&gpx3 5 0>;
+		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 		initial-mode = <1>;
 	};
 
@@ -276,15 +271,13 @@
 				regulator-always-on;
 			};
 
-			ldo8_reg: ldo@8 {
-				regulator-compatible = "LDO8";
+			ldo8_reg: LDO8 {
 				regulator-name = "VDD10_HDMI_1.0V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 			};
 
-			ldo10_reg: ldo@10 {
-				regulator-compatible = "LDO10";
+			ldo10_reg: LDO10 {
 				regulator-name = "VDDQ_MIPIHSI_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -424,8 +417,6 @@
 };
 
 &i2c_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
 	status = "okay";
 	max98090: max98090@10 {
 		compatible = "maxim,max98090";
@@ -440,8 +431,6 @@
 
 &i2c_2 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
 };
 
 &i2c_8 {
@@ -490,7 +479,7 @@
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	pinctrl-names = "default";
 	vmmc-supply = <&ldo4_reg &ldo21_reg>;
-	cd-gpios = <&gpk2 2 0>;
+	cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 8632f35c6c26..dd89f7b37c9f 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -13,7 +13,6 @@
 
 /dts-v1/;
 #include "exynos4412-odroid-common.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Hardkernel ODROID-U3 board based on Exynos4412";
@@ -27,11 +26,54 @@
 		compatible = "gpio-leds";
 		led1 {
 			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 10000 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 102 170 230>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     trip = <&cpu_alert1>;
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     trip = <&cpu_alert2>;
+				     cooling-device = <&cpu0 13 13>;
+				};
+				map2 {
+				     trip = <&cpu_alert0>;
+				     cooling-device = <&fan0 0 1>;
+				};
+				map3 {
+				     trip = <&cpu_alert1>;
+				     cooling-device = <&fan0 1 2>;
+				};
+				map4 {
+				     trip = <&cpu_alert2>;
+				     cooling-device = <&fan0 2 3>;
+				};
+			};
+		};
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
 };
 
 &usb3503 {
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 679ac103ebf6..bf7b21b817e4 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -26,13 +26,13 @@
 		compatible = "gpio-leds";
 		led1 {
 			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 		led2 {
 			label = "led2:mmc0";
-			gpios = <&gpc1 2 1>;
+			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "mmc0";
 		};
@@ -44,11 +44,11 @@
 		home_key {
 			interrupt-parent = <&gpx2>;
 			interrupts = <2 0>;
-			gpios = <&gpx2 2 0>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_HOME>;
 			label = "home key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -57,7 +57,7 @@
 		regulator-name = "p3v3_en";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 1>;
+		gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 		regulator-always-on;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 9d528af68c1a..8bca699b7f20 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -14,6 +14,7 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -45,7 +46,7 @@
 			regulator-name = "VMEM_VDD_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -88,10 +89,6 @@
 	status = "okay";
 };
 
-&g2d {
-	status = "okay";
-};
-
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -107,13 +104,13 @@
 
 		s5m8767,pmic-buck-default-dvs-idx = <3>;
 
-		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
-						 <&gpx2 4 0>,
-						 <&gpx2 5 0>;
+		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 4 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 5 GPIO_ACTIVE_HIGH>;
 
-		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
-						<&gpm3 6 0>,
-						<&gpm3 7 0>;
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
 
 		s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
 						 <1200000>, <1200000>,
@@ -426,7 +423,7 @@
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index c2421df1fa43..a51069f3c03b 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -41,15 +41,11 @@
 	};
 };
 
-&g2d {
-	status = "okay";
-};
-
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 525684ca8dc0..4840bbdaa9ec 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -13,6 +13,7 @@
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
@@ -31,26 +32,26 @@
 
 		led1 {
 			label = "led1";
-			gpios = <&gpm4 0 1>;
+			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led2 {
 			label = "led2";
-			gpios = <&gpm4 1 1>;
+			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led3 {
 			label = "led3";
-			gpios = <&gpm4 2 1>;
+			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led4 {
 			label = "led4";
-			gpios = <&gpm4 3 1>;
+			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 2a1ebb76ebe0..ed017cc7b14f 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -65,7 +65,7 @@
 			regulator-name = "CAM_SENSOR_A";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 2 0>;
+			gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -74,7 +74,7 @@
 			regulator-name = "LCD_VDD_2.2V";
 			regulator-min-microvolt = <2200000>;
 			regulator-max-microvolt = <2200000>;
-			gpio = <&gpc0 1 0>;
+			gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -83,7 +83,7 @@
 			regulator-name = "CAM_AF";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 4 0>;
+			gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
@@ -92,7 +92,7 @@
 			regulator-name = "LED_A_3.0V";
 			regulator-min-microvolt = <3000000>;
 			regulator-max-microvolt = <3000000>;
-			gpio = <&gpj0 5 0>;
+			gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -101,33 +101,33 @@
 		compatible = "gpio-keys";
 
 		key-down {
-			gpios = <&gpx3 3 1>;
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		key-up {
-			gpios = <&gpx2 2 1>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		key-power {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key-ok {
-			gpios = <&gpx0 1 1>;
+			gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
 			linux,code = <139>;
 			label = "ok";
 			debounce-inteval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -198,7 +198,7 @@
 
 	i2c_ak8975: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -207,13 +207,13 @@
 		ak8975@0c {
 			compatible = "asahi-kasei,ak8975";
 			reg = <0x0c>;
-			gpios = <&gpj0 7 0>;
+			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -359,7 +359,7 @@
 		reg = <0>;
 		vdd3-supply = <&lcd_vdd3_reg>;
 		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 0>;
+		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 		power-on-delay= <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
@@ -391,6 +391,7 @@
 };
 
 &exynos_usbphy {
+	vbus-supply = <&esafeout1_reg>;
 	status = "okay";
 };
 
@@ -446,7 +447,7 @@
 			clocks = <&camera 1>;
 			clock-names = "extclk";
 			samsung,camclk-out = <1>;
-			gpios = <&gpm1 6 0>;
+			gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
 
 			port {
 				is_s5k6a3_ep: endpoint {
@@ -488,8 +489,8 @@
 	s5c73m3@3c {
 		compatible = "samsung,s5c73m3";
 		reg = <0x3c>;
-		standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
-		xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+		standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
+		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
 		vdd-int-supply = <&buck9_reg>;
 		vddio-cis-supply = <&ldo9_reg>;
 		vdda-supply = <&ldo17_reg>;
@@ -564,16 +565,14 @@
 		#clock-cells = <1>;
 
 		voltage-regulators {
-			ldo1_reg: ldo1 {
-				regulator-compatible = "LDO1";
+			ldo1_reg: LDO1 {
 				regulator-name = "VALIVE_1.0V_AP";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
 			};
 
-			ldo2_reg: ldo2 {
-				regulator-compatible = "LDO2";
+			ldo2_reg: LDO2 {
 				regulator-name = "VM1M2_1.2V_AP";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -583,32 +582,28 @@
 				};
 			};
 
-			ldo3_reg: ldo3 {
-				regulator-compatible = "LDO3";
+			ldo3_reg: LDO3 {
 				regulator-name = "VCC_1.8V_AP";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
-			ldo4_reg: ldo4 {
-				regulator-compatible = "LDO4";
+			ldo4_reg: LDO4 {
 				regulator-name = "VCC_2.8V_AP";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
 			};
 
-			ldo5_reg: ldo5 {
-				regulator-compatible = "LDO5";
+			ldo5_reg: LDO5 {
 				regulator-name = "VCC_1.8V_IO";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
-			ldo6_reg: ldo6 {
-				regulator-compatible = "LDO6";
+			ldo6_reg: LDO6 {
 				regulator-name = "VMPLL_1.0V_AP";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -618,8 +613,7 @@
 				};
 			};
 
-			ldo7_reg: ldo7 {
-				regulator-compatible = "LDO7";
+			ldo7_reg: LDO7 {
 				regulator-name = "VPLL_1.0V_AP";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -629,8 +623,7 @@
 				};
 			};
 
-			ldo8_reg: ldo8 {
-				regulator-compatible = "LDO8";
+			ldo8_reg: LDO8 {
 				regulator-name = "VMIPI_1.0V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -639,15 +632,13 @@
 				};
 			};
 
-			ldo9_reg: ldo9 {
-				regulator-compatible = "LDO9";
+			ldo9_reg: LDO9 {
 				regulator-name = "CAM_ISP_MIPI_1.2V";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 			};
 
-			ldo10_reg: ldo10 {
-				regulator-compatible = "LDO10";
+			ldo10_reg: LDO10 {
 				regulator-name = "VMIPI_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -656,8 +647,7 @@
 				};
 			};
 
-			ldo11_reg: ldo11 {
-				regulator-compatible = "LDO11";
+			ldo11_reg: LDO11 {
 				regulator-name = "VABB1_1.95V";
 				regulator-min-microvolt = <1950000>;
 				regulator-max-microvolt = <1950000>;
@@ -667,8 +657,7 @@
 				};
 			};
 
-			ldo12_reg: ldo12 {
-				regulator-compatible = "LDO12";
+			ldo12_reg: LDO12 {
 				regulator-name = "VUOTG_3.0V";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
@@ -677,15 +666,13 @@
 				};
 			};
 
-			ldo13_reg: ldo13 {
-				regulator-compatible = "LDO13";
+			ldo13_reg: LDO13 {
 				regulator-name = "NFC_AVDD_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo14_reg: ldo14 {
-				regulator-compatible = "LDO14";
+			ldo14_reg: LDO14 {
 				regulator-name = "VABB2_1.95V";
 				regulator-min-microvolt = <1950000>;
 				regulator-max-microvolt = <1950000>;
@@ -695,8 +682,7 @@
 				};
 			};
 
-			ldo15_reg: ldo15 {
-				regulator-compatible = "LDO15";
+			ldo15_reg: LDO15 {
 				regulator-name = "VHSIC_1.0V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
@@ -705,8 +691,7 @@
 				};
 			};
 
-			ldo16_reg: ldo16 {
-				regulator-compatible = "LDO16";
+			ldo16_reg: LDO16 {
 				regulator-name = "VHSIC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -715,80 +700,69 @@
 				};
 			};
 
-			ldo17_reg: ldo17 {
-				regulator-compatible = "LDO17";
+			ldo17_reg: LDO17 {
 				regulator-name = "CAM_SENSOR_CORE_1.2V";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 			};
 
-			ldo18_reg: ldo18 {
-				regulator-compatible = "LDO18";
+			ldo18_reg: LDO18 {
 				regulator-name = "CAM_ISP_SEN_IO_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo19_reg: ldo19 {
-				regulator-compatible = "LDO19";
+			ldo19_reg: LDO19 {
 				regulator-name = "VT_CAM_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo20_reg: ldo20 {
-				regulator-compatible = "LDO20";
+			ldo20_reg: LDO20 {
 				regulator-name = "VDDQ_PRE_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo21_reg: ldo21 {
-				regulator-compatible = "LDO21";
+			ldo21_reg: LDO21 {
 				regulator-name = "VTF_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
 			};
 
-			ldo22_reg: ldo22 {
-				regulator-compatible = "LDO22";
+			ldo22_reg: LDO22 {
 				regulator-name = "VMEM_VDD_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
-			ldo23_reg: ldo23 {
-				regulator-compatible = "LDO23";
+			ldo23_reg: LDO23 {
 				regulator-name = "TSP_AVDD_3.3V";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
-			ldo24_reg: ldo24 {
-				regulator-compatible = "LDO24";
+			ldo24_reg: LDO24 {
 				regulator-name = "TSP_VDD_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
-			ldo25_reg: ldo25 {
-				regulator-compatible = "LDO25";
+			ldo25_reg: LDO25 {
 				regulator-name = "LCD_VCC_3.3V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
 			};
 
-			ldo26_reg: ldo26 {
-				regulator-compatible = "LDO26";
+			ldo26_reg: LDO26 {
 				regulator-name = "MOTOR_VCC_3.0V";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3000000>;
 			};
 
-			buck1_reg: buck1 {
-				regulator-compatible = "BUCK1";
+			buck1_reg: BUCK1 {
 				regulator-name = "vdd_mif";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1100000>;
@@ -799,8 +773,7 @@
 				};
 			};
 
-			buck2_reg: buck2 {
-				regulator-compatible = "BUCK2";
+			buck2_reg: BUCK2 {
 				regulator-name = "vdd_arm";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1500000>;
@@ -811,8 +784,7 @@
 				};
 			};
 
-			buck3_reg: buck3 {
-				regulator-compatible = "BUCK3";
+			buck3_reg: BUCK3 {
 				regulator-name = "vdd_int";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
@@ -823,8 +795,7 @@
 				};
 			};
 
-			buck4_reg: buck4 {
-				regulator-compatible = "BUCK4";
+			buck4_reg: BUCK4 {
 				regulator-name = "vdd_g3d";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
@@ -834,40 +805,35 @@
 				};
 			};
 
-			buck5_reg: buck5 {
-				regulator-compatible = "BUCK5";
+			buck5_reg: BUCK5 {
 				regulator-name = "VMEM_1.2V_AP";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 			};
 
-			buck6_reg: buck6 {
-				regulator-compatible = "BUCK6";
+			buck6_reg: BUCK6 {
 				regulator-name = "VCC_SUB_1.35V";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 			};
 
-			buck7_reg: buck7 {
-				regulator-compatible = "BUCK7";
+			buck7_reg: BUCK7 {
 				regulator-name = "VCC_SUB_2.0V";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
 				regulator-always-on;
 			};
 
-			buck8_reg: buck8 {
-				regulator-compatible = "BUCK8";
+			buck8_reg: BUCK8 {
 				regulator-name = "VMEM_VDDF_3.0V";
 				regulator-min-microvolt = <2850000>;
 				regulator-max-microvolt = <2850000>;
 				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
-			buck9_reg: buck9 {
-				regulator-compatible = "BUCK9";
+			buck9_reg: BUCK9 {
 				regulator-name = "CAM_ISP_CORE_1.2V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1200000>;
@@ -1268,6 +1234,10 @@
 	status = "okay";
 };
 
+&prng {
+	status = "okay";
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
@@ -1276,7 +1246,7 @@
 
 &sdhci_2 {
 	bus-width = <4>;
-	cd-gpios = <&gpx3 4 0>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
 	pinctrl-names = "default";
@@ -1303,7 +1273,7 @@
 &spi_1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 0>;
+	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	s5c73m3_spi: s5c73m3 {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 294cfe40388d..40beede46e55 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -64,73 +64,73 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <200000>;
 		};
-		opp01 {
+		opp@300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <200000>;
 		};
-		opp02 {
+		opp@400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <925000>;
 			clock-latency-ns = <200000>;
 		};
-		opp03 {
+		opp@500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <950000>;
 			clock-latency-ns = <200000>;
 		};
-		opp04 {
+		opp@600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <975000>;
 			clock-latency-ns = <200000>;
 		};
-		opp05 {
+		opp@700000000 {
 			opp-hz = /bits/ 64 <700000000>;
 			opp-microvolt = <987500>;
 			clock-latency-ns = <200000>;
 		};
-		opp06 {
+		opp@800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1000000>;
 			clock-latency-ns = <200000>;
 			opp-suspend;
 		};
-		opp07 {
+		opp@900000000 {
 			opp-hz = /bits/ 64 <900000000>;
 			opp-microvolt = <1037500>;
 			clock-latency-ns = <200000>;
 		};
-		opp08 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1087500>;
 			clock-latency-ns = <200000>;
 		};
-		opp09 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1137500>;
 			clock-latency-ns = <200000>;
 		};
-		opp10 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1187500>;
 			clock-latency-ns = <200000>;
 		};
-		opp11 {
+		opp@1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1250000>;
 			clock-latency-ns = <200000>;
 		};
-		opp12 {
+		opp@1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1287500>;
 			clock-latency-ns = <200000>;
 		};
-		opp13 {
+		opp@1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1350000>;
 			clock-latency-ns = <200000>;
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index ad764842fff5..28b04b6795c9 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -380,7 +380,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index b77dac61ffb5..84a23f962946 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -116,7 +116,6 @@
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
 		iommus = <&sysmmu_g2d>;
-		status = "disabled";
 	};
 
 	camera {
@@ -339,6 +338,10 @@
 	compatible = "samsung,exynos4212-jpeg";
 };
 
+&rotator {
+	compatible = "samsung,exynos4212-rotator";
+};
+
 &mixer {
 	compatible = "samsung,exynos4212-mixer";
 	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 110dbd4fb884..92313cac035e 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
 
 / {
 	interrupt-parent = <&gic>;
@@ -30,6 +31,11 @@
 		reg = <0x10000000 0x100>;
 	};
 
+	sromc@12250000 {
+		compatible = "samsung,exynos-srom";
+		reg = <0x12250000 0x14>;
+	};
+
 	combiner: interrupt-controller@10440000 {
 		compatible = "samsung,exynos4210-combiner";
 		#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index db3f65f3eb45..8b2acc74aa76 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -34,42 +34,42 @@
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -129,10 +129,6 @@
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
-};
-
-&fimd {
-	status = "okay";
 
 	display-timings {
 		native-mode = <&timing0>;
@@ -152,6 +148,10 @@
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index c625e71217aa..0f5dcd418af8 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -89,14 +89,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
 	status = "okay";
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
 
 	display-timings {
 		native-mode = <&timing0>;
@@ -116,6 +108,14 @@
 	};
 };
 
+&ehci {
+	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
new file mode 100644
index 000000000000..95210ef6a6b5
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -0,0 +1,682 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	aliases {
+		i2c104 = &i2c_104;
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	vbat: vbat-fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@12CA0000}>;
+
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+		/* Use ID 104 as a hint that we're on physical bus 4 */
+		i2c_104: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+
+			cros_ec: embedded-controller {
+				compatible = "google,cros-ec-i2c";
+				reg = <0x1e>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-parent = <&gpx1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ec_irq>;
+				wakeup-source;
+			};
+
+			power-regulator {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+
+	sound {
+		samsung,i2s-controller = <&i2s0>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_en>;
+		enable-active-high;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port@0 {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad {
+		reg = <0x67>;
+		compatible = "cypress,cyapa";
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	hdmiphy: hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	non-removable;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+	cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+	status = "okay";
+	num-slots = <1>;
+	non-removable;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+	wifi_en: wifi-en {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	wifi_rst: wifi-rst {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	arb_our_claim: arb-our-claim {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
new file mode 100644
index 000000000000..f811dc800660
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -0,0 +1,47 @@
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+	model = "Google Snow Rev 5+";
+	compatible = "google,snow-rev5", "samsung,exynos5250",
+		"samsung,exynos5";
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Snow-I2S-MAX98090";
+		samsung,audio-codec = <&max98090>;
+	};
+};
+
+&i2c_7 {
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+	};
+};
+
+&pinctrl_0 {
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 0720caab5511..995c7ce6c12b 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -9,698 +9,35 @@
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
+#include "exynos5250-snow-common.dtsi"
 
 / {
 	model = "Google Snow";
-	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		i2c104 = &i2c_104;
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=tty1";
-		stdout-path = "serial3:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq &lid_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	vbat: vbat-fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@12CA0000}>;
-
-		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
-		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
-		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-
-			cros_ec: embedded-controller {
-				compatible = "google,cros-ec-i2c";
-				reg = <0x1e>;
-				interrupts = <6 IRQ_TYPE_NONE>;
-				interrupt-parent = <&gpx1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&ec_irq>;
-				wakeup-source;
-			};
-
-			power-regulator {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					dcdc1 {
-						ti,enable-ext-control;
-					};
-					dcdc2 {
-						ti,enable-ext-control;
-					};
-					dcdc3 {
-						ti,enable-ext-control;
-					};
-					fet1: fet1 {
-						regulator-name = "vcd_led";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet4 {
-						regulator-name = "sdcard";
-						ti,overcurrent-wait = <3>;
-					};
-					fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet6: fet6 {
-						regulator-name = "lcd_vdd";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					ldo1 {
-					};
-					ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
+	compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
+		"samsung,exynos5";
 
 	sound {
 		compatible = "google,snow-audio-max98095";
 
 		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98095>;
 	};
-
-	usb3_vbus_reg: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_en>;
-		enable-active-high;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
-		power-supply = <&fet1>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	panel: panel {
-		compatible = "auo,b116xw03";
-		power-supply = <&fet6>;
-		backlight = <&backlight>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&bridge_out>;
-			};
-		};
-	};
-
-	mmc3_pwrseq: mmc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
-			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "ext_clock";
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
-	ports {
-		port@0 {
-			dp_out: endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
-		};
-	};
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	phy = <&hdmiphy>;
-	ddc = <&i2c_2>;
-	hdmi-en-supply = <&tps65090_fet7>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	max77686: max77686@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.8V_LDO_OUT2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.35V_BUCK_OUT6";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "P2.0V_BUCK_OUT7";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "P2.85V_BUCK_OUT8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	trackpad {
-		reg = <0x67>;
-		compatible = "cypress,cyapa";
-		interrupts = <2 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-	};
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
-	samsung,pin-pud = <0>;
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
-};
-
-&i2c_3 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
 };
 
 &i2c_7 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	ptn3460: lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-		edid-emulation = <5>;
-
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-
-			port@1 {
-				bridge_in: endpoint {
-					remote-endpoint = <&dp_out>;
-				};
-			};
-		};
-	};
-
 	max98095: codec@11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;
-		pinctrl-0 = <&max98095_en>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&max98095_en>;
 	};
 };
 
-&i2c_8 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	hdmiphy: hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
-	cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
 &pinctrl_0 {
-	wifi_en: wifi-en {
-		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	wifi_rst: wifi-rst {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
 	max98095_en: max98095-en {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <0>;
 		samsung,pin-pud = <3>;
 		samsung,pin-drv = <0>;
 	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb3_vbus_en: usb3-vbus-en {
-		samsung,pins = "gpx2-7";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lid_irq: lid-irq {
-		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	arb_their_claim: arb-their-claim {
-		samsung,pins = "gpe0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	arb_our_claim: arb-our-claim {
-		samsung,pins = "gpf0-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
 };
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
-	samsung,pin-drv = <0>;
-};
-
-&sd3_clk {
-	samsung,pin-drv = <0>;
-};
-
-&sd3_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
-};
-
-&spi_1 {
-	status = "okay";
-	samsung,spi-src-clk = <0>;
-	num-cs = <1>;
-	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&usbdrd_dwc3 {
-	dr_mode = "host";
-};
-
-&usbdrd_phy {
-	vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index c1edd6d038a9..0f500cb1eb2d 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -37,7 +37,7 @@
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -46,7 +46,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index b24610ea8c2a..e653ae04015a 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -130,6 +130,10 @@
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x100440A0 0x20>;
 		#power-domain-cells = <0>;
+		clocks = <&clock CLK_FIN_PLL>,
+			 <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
+			 <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
+		clock-names = "oscclk", "clk0", "clk1";
 	};
 
 	clock: clock-controller@10010000 {
@@ -265,6 +269,15 @@
 		iommu-names = "left", "right";
 	};
 
+	rotator: rotator@11C00000 {
+		compatible = "samsung,exynos5250-rotator";
+		reg = <0x11C00000 0x64>;
+		interrupts = <0 84 0>;
+		clocks = <&clock CLK_ROTATOR>;
+		clock-names = "rotator";
+		iommus = <&sysmmu_rotator>;
+	};
+
 	tmu: tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
@@ -661,7 +674,7 @@
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 
@@ -794,7 +807,7 @@
 
 	sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
+		reg = <0x10830000 0x300>;
 		interrupts = <0 112 0>;
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
new file mode 100644
index 000000000000..f9aa6bb55464
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -0,0 +1,406 @@
+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              http://www.hardkernel.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm5: gpm5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm7: gpm7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy0: gpy0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy7: gpy7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>,
+		             <24 0>,
+		             <25 0>,
+		             <25 1>,
+		             <26 0>,
+		             <26 1>,
+		             <27 0>,
+		             <27 1>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>,
+		             <28 1>,
+		             <29 0>,
+		             <29 1>,
+		             <30 0>,
+		             <30 1>,
+		             <31 0>,
+		             <31 1>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index cebeaab3abec..a731fbe28ebc 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5410.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 / {
 	model = "Samsung SMDK5410 board based on EXYNOS5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
@@ -61,6 +62,46 @@
 	disable-wp;
 };
 
+&pinctrl_0 {
+	srom_ctl: srom-ctl {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	srom_ebi: srom-ebi {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@3,0 {
+		compatible = "smsc,lan9115";
+		reg = <3 0 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		smsc,force-internal-phy;
+
+		samsung,srom-page-mode = <1>;
+		samsung,srom-timing = <9 12 1 9 1 1>;
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd23fa9..fa558674ac76 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
 / {
@@ -21,6 +22,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -97,6 +102,17 @@
 			reg = <0x10000000 0x100>;
 		};
 
+		sromc: sromc@12250000 {
+			compatible = "samsung,exynos-srom";
+			reg = <0x12250000 0x14>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x04000000 0x20000
+				  1 0 0x05000000 0x20000
+				  2 0 0x06000000 0x20000
+				  3 0 0x07000000 0x20000>;
+		};
+
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
@@ -191,6 +207,36 @@
 			status = "disabled";
 		};
 
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <0 45 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
+		};
+
+		pinctrl_1: pinctrl@14000000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <0 46 0>;
+		};
+
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <0 50 0>;
+		};
+
+		pinctrl_3: pinctrl@03860000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 47 0>;
+		};
+
 		uart0: serial@12C00000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12C00000 0x100>;
@@ -219,3 +265,5 @@
 		};
 	};
 };
+
+#include "exynos5410-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index eeb4ac22cfce..a103ce8c3985 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
@@ -44,13 +46,21 @@
 
 		wakeup {
 			label = "SW-TACT1";
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
new file mode 100644
index 000000000000..5c052d7ff554
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -0,0 +1,126 @@
+/*
+ * SAMSUNG EXYNOS5420 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5420 and Exynos5800
+ * boards: CPU[0123] being the A15.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1b95da79293c..3981ddb25036 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
 
 / {
 	model = "Google Peach Pit Rev 6+";
@@ -64,7 +65,7 @@
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -73,7 +74,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -94,7 +95,7 @@
 		regulator-name = "P5.0V_USB3CON0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -105,7 +106,7 @@
 		regulator-name = "P5.0V_USB3CON1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -143,6 +144,14 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
@@ -153,7 +162,7 @@
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x06>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
+	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 
 	ports {
 		port@0 {
@@ -690,11 +699,9 @@
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -709,10 +716,9 @@
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
+	non-removable;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
@@ -930,7 +936,7 @@
 	status = "okay";
 	num-cs = <1>;
 	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
 
 	cros_ec: cros-ec@0 {
 		compatible = "google,cros-ec-spi";
@@ -940,6 +946,7 @@
 		pinctrl-0 = <&ec_spi_cs &ec_irq>;
 		reg = <0>;
 		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 98871f972c8a..0785fedf441e 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -11,6 +11,8 @@
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung SMDK5420 board based on EXYNOS5420";
@@ -69,7 +71,7 @@
 		regulator-name = "VBUS0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg0 5 0>;
+		gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -80,7 +82,7 @@
 		regulator-name = "VBUS1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg1 4 0>;
+		gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -88,6 +90,14 @@
 
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
@@ -98,10 +108,7 @@
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
 	status = "okay";
-};
 
-&fimd {
-	status = "okay";
 	display-timings {
 		native-mode = <&timing0>;
 		timing0: timing@0 {
@@ -118,9 +125,13 @@
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 1b3d6c769a3c..7b99cb58d82d 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -50,75 +50,121 @@
 		usbdrdphy1 = &usbdrd_phy1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+	cluster_a15_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp@1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		opp@1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1212500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		opp@1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1175000>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		opp@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		opp@1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1112500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <140000>;
 		};
-
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = < 987500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = < 962500>;
+			clock-latency-ns = <140000>;
 		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = < 937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = < 912500>;
+			clock-latency-ns = <140000>;
+		};
+	};
 
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+	cluster_a7_opp_table: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp@1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1275000>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1212500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1162500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1112500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <140000>;
+		};
+		opp@800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp@700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp@600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
 		};
 	};
 
+	/*
+	 * The 'cpus' node is not present here but instead it is provided
+	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
+	 */
+
 	cci: cci@10d20000 {
 		compatible = "arm,cci-400";
 		#address-cells = <1>;
@@ -252,8 +298,10 @@
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
 		#power-domain-cells = <0>;
-		clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
-		clock-names = "asb0", "asb1";
+		clocks = <&clock CLK_FIN_PLL>,
+			 <&clock CLK_MOUT_USER_ACLK300_GSCL>,
+			 <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
+		clock-names = "oscclk", "clk0", "asb0", "asb1";
 	};
 
 	isp_pd: power-domain@10044020 {
@@ -327,7 +375,7 @@
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 
@@ -717,6 +765,15 @@
 		iommus = <&sysmmu_tv>;
 	};
 
+	rotator: rotator@11C00000 {
+		compatible = "samsung,exynos5250-rotator";
+		reg = <0x11C00000 0x64>;
+		interrupts = <0 84 0>;
+		clocks = <&clock CLK_ROTATOR>;
+		clock-names = "rotator";
+		iommus = <&sysmmu_rotator>;
+	};
+
 	gsc_0: video-scaler@13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
@@ -850,7 +907,7 @@
 
 	sss: sss@10830000 {
 		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
+		reg = <0x10830000 0x300>;
 		interrupts = <0 112 0>;
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
@@ -1059,6 +1116,16 @@
 		#iommu-cells = <0>;
 	};
 
+	sysmmu_rotator: sysmmu@0x11D40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11D40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+		#iommu-cells = <0>;
+	};
+
 	sysmmu_jpeg0: sysmmu@0x11F10000 {
 		compatible = "samsung,exynos-sysmmu";
 		reg = <0x11F10000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
index 2b289d7c0d13..3e4c4ad96d63 100644
--- a/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpu-thermal.dtsi
@@ -16,7 +16,7 @@
 	thermal-zones {
 		cpu0_thermal: cpu0-thermal {
 			thermal-sensors = <&tmu_cpu0 0>;
-			polling-delay-passive = <0>;
+			polling-delay-passive = <250>;
 			polling-delay = <0>;
 			trips {
 				cpu_alert0: cpu-alert-0 {
@@ -39,6 +39,23 @@
 					hysteresis = <0>; /* millicelsius */
 					type = "critical";
 				};
+				/*
+				 * Exyunos542x support only 4 trip-points
+				 * so for these polling mode is required.
+				 * Start polling at temperature level of last
+				 * interrupt-driven trip: cpu_alert2
+				 */
+				cpu_alert3: cpu-alert-3 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert4: cpu-alert-4 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+
 			};
 			cooling-maps {
 				map0 {
@@ -53,6 +70,33 @@
 				     trip = <&cpu_alert2>;
 				     cooling-device = <&fan0 2 3>;
 				};
+				/*
+				 * When reaching cpu_alert3, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * be: 1500 MHz and 1100 MHz.
+				 */
+				map3 {
+				     trip = <&cpu_alert3>;
+				     cooling-device = <&cpu0 0 2>;
+				};
+				map4 {
+				     trip = <&cpu_alert3>;
+				     cooling-device = <&cpu4 0 2>;
+				};
+
+				/*
+				 * When reaching cpu_alert4, reduce CPU
+				 * further, down to 600 MHz (11 steps for big,
+				 * 7 steps for LITTLE).
+				 */
+				map5 {
+				     trip = <&cpu_alert4>;
+				     cooling-device = <&cpu0 3 7>;
+				};
+				map6 {
+				     trip = <&cpu_alert4>;
+				     cooling-device = <&cpu4 3 11>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index b7f60c855459..bf3c6f1ec4ee 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -4,78 +4,122 @@
  * Copyright (c) 2015 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * The only difference between EXYNOS5422 and EXYNOS5800 is cpu ordering. The
- * EXYNOS5422 is booting from Cortex-A7 core while the EXYNOS5800 is booting
- * from Cortex-A15 core.
+ * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
  *
- * EXYNOS5422 based board files can include this file to provide cpu ordering
- * which could boot a cortex-a7 from cpu0.
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-&cpu0 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x100>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-&cpu1 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x101>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
 
-&cpu2 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x102>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
 
-&cpu3 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a7";
-	reg = <0x103>;
-	clock-frequency = <1000000000>;
-	cci-control-port = <&cci_control0>;
-};
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
 
-&cpu4 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x0>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
-};
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <11>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
 
-&cpu5 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x1>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
-};
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			clocks = <&clock CLK_ARM_CLK>;
+			reg = <0x0>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
 
-&cpu6 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x2>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
-};
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
 
-&cpu7 {
-	device_type = "cpu";
-	compatible = "arm,cortex-a15";
-	reg = <0x3>;
-	clock-frequency = <1800000000>;
-	cci-control-port = <&cci_control1>;
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
new file mode 100644
index 000000000000..9493923ec652
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -0,0 +1,61 @@
+/*
+ * Hardkernel Odroid XU3 Audio Codec device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU3";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&hsi2c_5 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 0>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 3b43e57845ae..1bd507bfa750 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -43,71 +43,7 @@
 		pinctrl-0 = <&emmc_nrst_pin>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 1>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,name = "Odroid-XU3";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speakers", "Speakers";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN1", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s0 0>;
-			system-clock-frequency = <19200000>;
-		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&max98090>;
-			clocks = <&i2s0 CLK_I2S_CDCLK>;
-		};
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
 	};
 
 	fan0: pwm-fan {
@@ -131,14 +67,17 @@
 			<19200000>;
 };
 
-&fimd {
-	status = "okay";
+&cpu0 {
+	cpu-supply = <&buck6_reg>;
 };
 
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 
@@ -160,6 +99,7 @@
 		s2mps11,buck2-ramp-enable = <1>;
 		s2mps11,buck3-ramp-enable = <1>;
 		s2mps11,buck4-ramp-enable = <1>;
+		samsung,s2mps11-acokb-ground;
 
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
@@ -375,19 +315,6 @@
 	};
 };
 
-&hsi2c_5 {
-	status = "okay";
-	max98090: max98090@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
 &i2c_2 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
@@ -399,10 +326,6 @@
 	};
 };
 
-&i2s0 {
-	status = "okay";
-};
-
 &mfc {
 	samsung,mfc-r = <0x43000000 0x800000>;
 	samsung,mfc-l = <0x51000000 0x800000>;
@@ -463,18 +386,6 @@
 	};
 };
 
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
 &tmu_cpu0 {
 	vtmu-supply = <&ldo7_reg>;
 	status = "okay";
@@ -510,9 +421,7 @@
 	dr_mode = "host";
 };
 
-&usbdrd_dwc3_1 {
-	dr_mode = "otg";
-};
+/* usbdrd_dwc3_1 mode customized in each board */
 
 &usbdrd3_0 {
 	vdd33-supply = <&ldo9_reg>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index c06882bbb822..2ae1cf41dcb6 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -13,8 +13,59 @@
 
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 78e6a502f320..432406db85de 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -12,10 +12,45 @@
 
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
 };
 
 &i2c_0 {
@@ -49,3 +84,19 @@
 		shunt-resistor = <10000>;
 	};
 };
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
new file mode 100644
index 000000000000..2faf88627a48
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -0,0 +1,48 @@
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU4";
+	compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 2 -- Blue LED
+	 */
+	pinctrl-0 = <&pwm0_out &pwm2_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>, <2>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index e4443f4e6572..6a0d802e87c8 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5440.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
@@ -29,12 +30,12 @@
 };
 
 &pcie_0 {
-	reset-gpio = <&pin_ctrl 5 0>;
+	reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &pcie_1 {
-	reset-gpio = <&pin_ctrl 22 0>;
+	reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index f18b51f2eeaa..b9342ec5b9cf 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -200,7 +200,7 @@
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges;
 	};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 8f40c7e549bd..6e9edc1610c4 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -15,6 +15,7 @@
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
 #include "exynos5800.dtsi"
+#include "exynos5420-cpus.dtsi"
 
 / {
 	model = "Google Peach Pi Rev 10+";
@@ -63,7 +64,7 @@
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -72,7 +73,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
@@ -94,7 +95,7 @@
 		regulator-name = "P5.0V_USB3CON0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -105,7 +106,7 @@
 		regulator-name = "P5.0V_USB3CON1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -122,6 +123,12 @@
 		compatible = "auo,b133htn01";
 		power-supply = <&tps65090_fet6>;
 		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dp_out>;
+			};
+		};
 	};
 
 	mmc1_pwrseq: mmc1_pwrseq {
@@ -137,6 +144,14 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
@@ -147,8 +162,15 @@
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-	panel = <&panel>;
+	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
 };
 
 &fimd {
@@ -652,12 +674,10 @@
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <800000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -672,10 +692,9 @@
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
+	non-removable;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
@@ -893,7 +912,7 @@
 	status = "okay";
 	num-cs = <1>;
 	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
 
 	cros_ec: cros-ec@0 {
 		compatible = "google,cros-ec-spi";
@@ -903,6 +922,7 @@
 		pinctrl-0 = <&ec_spi_cs &ec_irq>;
 		reg = <0>;
 		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index c0bb3563cac1..8213016803e5 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -23,6 +23,114 @@
 	compatible = "samsung,exynos5800-clock";
 };
 
+&cluster_a15_opp_table {
+	opp@1700000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1600000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1500000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1400000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1300000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@1200000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@1100000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@1000000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@900000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@800000000 {
+		opp-microvolt = <900000>;
+	};
+	opp@700000000 {
+		opp-microvolt = <900000>;
+	};
+	opp@600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
+&cluster_a7_opp_table {
+	opp@1300000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1200000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1100000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp@1000000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@900000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@800000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp@700000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@600000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp@500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp@200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
 &mfc {
 	compatible = "samsung,mfc-v8";
 };
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index fe623928f687..a579fbf13b5f 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -16,7 +16,8 @@
 	compatible = "hisilicon,hi3620-hi4511";
 
 	chosen {
-		bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+		bootargs = "root=/dev/ram0";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 6cbb62e5c6a9..c85d07e6db61 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -68,7 +68,7 @@
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges = <0 0xfc000000 0x2000000>;
 
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 33130f8461c3..4e9562f806a2 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -43,7 +43,7 @@
 		amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
 			uart0: uart@10001000 {
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
index 721b09238f58..d13af8437d10 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
@@ -15,7 +15,7 @@
 	compatible = "hisilicon,hix5hd2";
 
 	chosen {
-		bootargs = "console=ttyAMA0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index c52722b14e4a..fdcc23d203e5 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -34,7 +34,7 @@
 		amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
 			timer0: timer@00002000 {
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index b995333ea22b..302d1168f424 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -383,9 +383,11 @@
 			};
 
 			ocotp@8002c000 {
-				compatible = "fsl,ocotp";
+				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x8002c000 0x2000>;
-				status = "disabled";
+				clocks = <&clks 15>;
 			};
 
 			axi-ahb@8002e000 {
@@ -567,7 +569,7 @@
 		};
 	};
 
-	iio_hwmon {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&lradc 8>;
 	};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index ed1d0b4578ef..cda6907a27b9 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -30,7 +30,7 @@
 			label = "BP1";
 			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 7c4b9f2f9aad..848ffa785b63 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -284,6 +284,7 @@
 #define MX25_PAD_CONTRAST__CC4			0x118 0x310 0x000 0x11 0x000
 #define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
 #define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x16 0x000
 
 #define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
 #define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
@@ -439,6 +440,7 @@
 #define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__UART1_DTR		0x1a8 0x3a0 0x000 0x14 0x000
 #define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
 
 #define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
@@ -446,6 +448,7 @@
 
 #define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
 #define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__UART1_DCD		0x1b0 0x3a8 0x000 0x14 0x000
 #define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
 
 #define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 677f81d9dcd5..6b1f4bbe6ec6 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -24,6 +24,10 @@
 		i2c2 = &i2c3;
 		mmc0 = &esdhc1;
 		mmc1 = &esdhc2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		pwm2 = &pwm3;
+		pwm3 = &pwm4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -265,13 +269,36 @@
 				status = "disabled";
 			};
 
-			tsc: tsc@50030000 {
-				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
-				reg = <0x50030000 0x4000>;
+			tscadc: tscadc@50030000 {
+				compatible = "fsl,imx25-tsadc";
+				reg = <0x50030000 0xc>;
 				interrupts = <46>;
 				clocks = <&clks 119>;
 				clock-names = "ipg";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 				status = "disabled";
+
+				adc: adc@50030800 {
+					compatible = "fsl,imx25-gcq";
+					reg = <0x50030800 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+
+				tsc: tcq@50030400 {
+					compatible = "fsl,imx25-tcq";
+					reg = <0x50030400 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <0>;
+					fsl,wires = <4>;
+					status = "disabled";
+				};
 			};
 
 			ssi1: ssi@50034000 {
@@ -493,7 +520,8 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 70>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -503,7 +531,8 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 70>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
 				status = "disabled";
@@ -512,8 +541,6 @@
 			usbmisc: usbmisc@53ff4600 {
 				#index-cells = <1>;
 				compatible = "fsl,imx25-usbmisc";
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
 				reg = <0x53ff4600 0x00f>;
 			};
 
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index feb9d34b239c..f818ea483aeb 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -486,7 +486,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024000 0x200>;
 				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@@ -495,7 +498,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024200 0x200>;
 				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
 				status = "disabled";
@@ -505,7 +511,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024400 0x200>;
 				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
 				status = "disabled";
@@ -515,7 +524,6 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx27-usbmisc";
 				reg = <0x10024600 0x200>;
-				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
 			};
 
 			sahara2: sahara@10025000 {
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 7ac4f1af16ac..1eaa131e2d18 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -225,7 +225,7 @@
 			label = "User button";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 5df0b24eaf59..7a80bd686c40 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -115,7 +115,7 @@
 
 			pwm: pwm@80064000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
+				pinctrl-0 = <&pwm4_pins_a>;
 				status = "okay";
 			};
 
@@ -170,7 +170,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
+		pwms = <&pwm 4 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
index 927b391d2058..88594747f454 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -36,7 +36,7 @@
 			label = "SW3";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -49,7 +49,7 @@
 			label = "SW4";
 			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 279249b8c3f3..e3ef94ac159f 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -57,7 +57,7 @@
 				flash: m25p80@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "sst,sst25vf016b";
+					compatible = "sst,sst25vf016b", "jedec,spi-nor";
 					spi-max-frequency = <40000000>;
 					reg = <0>;
 				};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index e35cc6ba3ca6..8d04e57039bc 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -41,7 +41,7 @@
 				flash: m25p80@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "m25p80";
+					compatible = "m25p80", "jedec,spi-nor";
 					spi-max-frequency = <40000000>;
 					reg = <0>;
 				};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 4ea89344a5ff..fd20e99c777e 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -130,7 +130,7 @@
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
-			clock-frequency = <27000000>;
+			clock-frequency = <26000000>;
 		};
 	};
 
@@ -202,7 +202,7 @@
 			0x02020049 /* row 2, col 2, KEY_KP9 */
 		>;
 		gpio-activelow;
-		linux,wakeup;
+		wakeup-source;
 		debounce-delay-ms = <100>;
 		col-scan-delay-us = <5000>;
 		linux,no-autorepeat;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4e073e854742..f637ec900cc8 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -405,6 +405,17 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				auart4_2pins_b: auart4@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__AUART4_RX
+						MX28_PAD_AUART0_RTS__AUART4_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -936,9 +947,11 @@
 			};
 
 			ocotp: ocotp@8002c000 {
-				compatible = "fsl,ocotp";
+				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x8002c000 0x2000>;
-				status = "disabled";
+				clocks = <&clks 25>;
 			};
 
 			axi-ahb@8002e000 {
@@ -1243,7 +1256,7 @@
 		};
 	};
 
-	iio_hwmon {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&lradc 8>;
 	};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index c34f82581248..5fdb222636a7 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -25,7 +25,7 @@
 		#size-cells = <0>;
 
 		cpu {
-			compatible = "arm,arm1136";
+			compatible = "arm,arm1136jf-s";
 			device_type = "cpu";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index 75b036700d31..4727bbb804e1 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -30,7 +30,7 @@
 			label = "BP1";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,input-type = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index e6540b5cfa4c..14e1320d9f84 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -29,7 +29,7 @@
 		#size-cells = <0>;
 
 		cpu {
-			compatible = "arm,arm1136";
+			compatible = "arm,arm1136jf-s";
 			device_type = "cpu";
 		};
 	};
@@ -305,7 +305,8 @@
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 73>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -315,7 +316,8 @@
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 73>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
 				dr_mode = "host";
@@ -325,8 +327,6 @@
 			usbmisc: usbmisc@53ff4600 {
 				#index-cells = <1>;
 				compatible = "fsl,imx35-usbmisc";
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
 				reg = <0x53ff4600 0x00f>;
 			};
 		};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index 1b22512c91bd..27d763c7a307 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -33,7 +33,7 @@
 	flash: m25p32@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "m25p32", "m25p80";
+		compatible = "m25p32", "jedec,spi-nor";
 		spi-max-frequency = <25000000>;
 		reg = <1>;
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 649befeb2cf9..018d24eb9965 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -107,7 +107,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 321662f53e33..16fc69c69ab2 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -156,7 +156,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
 	cap-sdio-irq;
-	enable-sdio-wakeup;
+	wakeup-source;
 	keep-power-in-suspend;
 	max-frequency = <50000000>;
 	no-1-8-v;
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 34599c547459..d270df3e5891 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -41,7 +41,7 @@
 			label = "BP1";
 			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,input-type = <1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h
index 9eb92abaeb6d..82eae3c8a3ce 100644
--- a/arch/arm/boot/dts/imx51-pinfunc.h
+++ b/arch/arm/boot/dts/imx51-pinfunc.h
@@ -536,7 +536,6 @@
 #define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
 #define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
 #define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK		0x2c8 0x6c8 0x000 0x2 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
new file mode 100644
index 000000000000..0ff76a1bc0f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Technologic Systems TS-4800";
+	compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x90000000 0x10000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			clock-frequency = <24576000>;
+		};
+	};
+
+	backlight_reg: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_lcd>;
+		regulator-name = "enable_lcd_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 78770>;
+		brightness-levels = <0 150 200 255>;
+		default-brightness-level = <1>;
+		power-supply = <&backlight_reg>;
+	};
+
+	display0: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <30066000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <50>;
+				hback-porch = <70>;
+				hsync-len = <50>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <50>;
+			};
+		};
+
+		port@0 {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc: m41t00@68 {
+		compatible = "stm,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	fpga@0 {
+		compatible = "simple-bus";
+		fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
+				      0x00000000 0x1c092480 0x00000000>;
+		reg = <0 0x0000000 0x1d000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x1d000>;
+
+		syscon: syscon@b0010000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000 0x3d>;
+			reg-io-width = <2>;
+
+			wdt@e {
+				compatible = "technologic,ts4800-wdt";
+				syscon = <&syscon 0xe>;
+			};
+		};
+
+		touchscreen {
+			compatible = "technologic,ts4800-ts";
+			reg = <0x12000 0x1000>;
+			syscon = <&syscon 0x10 6>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+		>;
+	};
+
+	pinctrl_enable_lcd: enablelcdgrp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D12__GPIO4_9		0x1c5
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_GPIO1_0__GPIO1_0		0x100
+			MX51_PAD_GPIO1_1__GPIO1_1		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x00000180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x00000180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x00002180
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x00002004
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x00002004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x00002004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x00002004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x00002004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x00002004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x00002180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x000020a4
+			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+			MX51_PAD_DI_GP4__DI2_PIN15		0x5
+		>;
+	};
+
+	pinctrl_pwm_backlight: backlightgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__PWM1_PWMO		0x80000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_weim: weimgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_DTACK__EIM_DTACK		0x85
+			MX51_PAD_EIM_CS0__EIM_CS0		0x0
+			MX51_PAD_EIM_CS1__EIM_CS1		0x0
+			MX51_PAD_EIM_EB0__EIM_EB0		0x85
+			MX51_PAD_EIM_EB1__EIM_EB1		0x85
+			MX51_PAD_EIM_OE__EIM_OE			0x85
+			MX51_PAD_EIM_LBA__EIM_LBA		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 3bc18835fb4b..4486bc47d140 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -69,21 +69,21 @@
 			label = "Home";
 			gpios = <&gpio5 10 0>;
 			linux,code = <102>; /* KEY_HOME */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back {
 			label = "Back";
 			gpios = <&gpio5 11 0>;
 			linux,code = <158>; /* KEY_BACK */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		program {
 			label = "Program";
 			gpios = <&gpio5 12 0>;
 			linux,code = <362>; /* KEY_PROGRAM */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		volume-up {
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 53fd75c8ffcf..c05e7cfd0cbc 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -59,22 +59,22 @@
 
 		power {
 			label = "Power Button";
-			gpios = <&gpio1 8 0>;
-			linux,code = <116>; /* KEY_POWER */
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
 		};
 
 		volume-up {
 			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-			gpio-key,wakeup;
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
 		};
 
 		volume-down {
 			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-			gpio-key,wakeup;
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index fc89ce1e5763..542ab9e697fb 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -76,7 +76,7 @@
 	flash: m25p32@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p";
+		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <1>;
 
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 13e842b0c785..0ecb43d88522 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -231,7 +231,7 @@
 		interrupts = <26 0>;
 		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <660>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 64804719f0f4..3cf682a681f4 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -101,7 +101,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <23 0>;
 		wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -126,7 +126,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <22 0>;
 		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -183,13 +183,14 @@
 	status = "okay";
 
 	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -202,19 +203,36 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
 
 	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -227,7 +245,7 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index d3e50b22064f..bd3dfefa5778 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -37,7 +37,7 @@
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
-			clock-frequency = <27000000>;
+			clock-frequency = <26000000>;
 		};
 	};
 
@@ -50,7 +50,7 @@
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
new file mode 100644
index 000000000000..e0161e46195c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
index 5f4d33ccc4b3..8398f979b912 100644
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
@@ -3,12 +3,42 @@
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -16,6 +46,6 @@
 #include "imx6qdl-nitrogen6x.dtsi"
 
 / {
-	model = "Freescale i.MX6 DualLite Nitrogen6x Board";
-	compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
 };
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index b13845c2823b..c3a14a4330a2 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -23,7 +23,7 @@
 
 &ecspi3 {
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
index 2de04479dc35..0f06ca5c9146 100644
--- a/arch/arm/boot/dts/imx6dl-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -2,12 +2,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index c275eecc9472..d35a5cdc3229 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -77,7 +77,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <22 0>;
 		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
index f607d4f1d244..8c314eee4fdd 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@@ -13,7 +13,7 @@
 #include "imx6qdl-wandboard-revb1.dtsi"
 
 / {
-	model = "Wandboard i.MX6 Dual Lite Board";
+	model = "Wandboard i.MX6 Dual Lite Board rev B1";
 	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
 
 	memory {
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4b0ec0703825..c13a73aa55ca 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -104,10 +104,15 @@
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>;
 	};
+
+	gpu-subsystem {
+		compatible = "fsl,imx-gpu-subsystem";
+		cores = <&gpu_2d>, <&gpu_3d>;
+	};
 };
 
 &gpt {
-	compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt";
+	compatible = "fsl,imx6dl-gpt";
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
new file mode 100644
index 000000000000..2cba82d0d859
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -0,0 +1,272 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2cddc;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			label = "Wake-Up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			label = "LED_4_GREEN";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led4-red {
+			label = "LED_4_RED";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-green {
+			label = "LED_5_GREEN";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led5-red {
+			label = "LED_5_RED";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		ledpwm1 {
+			label = "PWM1";
+			pwms = <&pwm1 0 50000>;
+			max-brightness = <255>;
+		};
+
+		ledpwm2 {
+			label = "PWM2";
+			pwms = <&pwm2 0 50000>;
+			max-brightness = <255>;
+		};
+
+		ledpwm3 {
+			label = "PWM3";
+			pwms = <&pwm3 0 50000>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&backlight {
+	brightness-levels = <0 127 191 223 239 247 251 255>;
+	default-brightness-level = <1>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2cddc>;
+	status = "okay";
+};
+
+&i2cddc {
+	status = "okay";
+};
+
+/* GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	/* active-low meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd_cd>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	/*
+	 * Mux the Apalis GPIOs
+	 * GPIO5, 6 used by optional fusion_F0710A kernel module
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
new file mode 100644
index 000000000000..3101be5bafa7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B450v3";
+	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
new file mode 100644
index 000000000000..823f55ccb60f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B650v3";
+	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
new file mode 100644
index 000000000000..984d00000403
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B850v3";
+	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "auo,b133htn01";
+		backlight = <&backlight_lvds>;
+		ddc-i2c-bus = <&mux2_i2c2>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pca9547_ddc: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux2_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		mux2_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		mux2_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux2_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		mux2_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		mux2_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux2_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux2_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&mux2_i2c1>;
+};
+
+&mux1_i2c1 {
+	ads7830@4a {
+		compatible = "ti,ads7830";
+		reg = <0x4a>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
new file mode 100644
index 000000000000..8f6e6035f3f7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -0,0 +1,632 @@
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: n25q032@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "spare";
+			reg = <0xd0000 0x130000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+	bus-width = <8>;
+	vmmc-supply = <&vdd_bperi>;
+	vqmmc-supply = <&vdd_bio>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_display: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x1b0b0
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x1b0b0
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x1b0b0
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			/* FEC Reset */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
+			/* AR8033 Interrupt */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05        0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIO 0-7 */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00  0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01  0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02  0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03  0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04  0x1b0b0
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05  0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06  0x1b0b0
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07  0x1b0b0
+			/* SUS_S3_OUT to CPLD */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe Reset */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			/* PCIe Wake */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC Interrupt */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			/* HUB_RESET */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+			/* uSDHC2 CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_reset: usdhc3grp-reset {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17059
+			/* uSDHC4 CD */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+			/* uSDHC4 SDIO PWR */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+			/* uSDHC4 SDIO WP */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			/* uSDHC4 SDIO LED */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
new file mode 100644
index 000000000000..bb66dfd5294c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -0,0 +1,225 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+	clocks {
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <22000000>;
+		};
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&ecspi5 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: m25p80@0 {
+		compatible = "atmel,at25";
+		spi-max-frequency = <20000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&i2c1 {
+	pca9547: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux1_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ads7830: ads7830@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+
+			mma8453: mma8453@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+			};
+		};
+
+		mux1_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+
+			mpl3115: mpl3115@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		mux1_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux1_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			sgtl5000: codec@0a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				clocks = <&mclk>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_3p3v>;
+			};
+		};
+
+		mux1_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pca9539: pca9539@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio2>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		mux1_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux1_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux1_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 4fa254347798..364578d707a5 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -109,7 +109,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "m25p80";
+		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
new file mode 100644
index 000000000000..4fa56019225e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -0,0 +1,502 @@
+/*
+ * Copyright 2016 United Western Technologies.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Uniwest Evi";
+	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usbh1_vbus: regulator-usbhubreset {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_hubreset>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "sharp,lq101k1ly04";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
+	status = "okay";
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		<&gpio4 25 GPIO_ACTIVE_LOW>,
+		<&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
+	status = "okay";
+};
+
+&ecspi5 {
+	fsl,spi-num-chipselects = <4>;
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		<&gpio1 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 12 GPIO_ACTIVE_LOW>,
+		<&gpio2 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
+	status = "okay";
+
+	eeprom: m95m02@1 {
+		compatible = "st,m95m02", "atmel,at25";
+		size = <262144>;
+		pagesize = <256>;
+		address-width = <24>;
+		spi-max-frequency = <5000000>;
+		reg = <1>;
+	};
+
+	pb_rtc: rtc@3 {
+		compatible = "nxp,rtc-pcf2123";
+		spi-max-frequency = <2450000>;
+		spi-cs-high;
+		reg = <3>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpminand>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,poll-retry-count = <100>;
+		sbs,i2c-retry-count = <100>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	fsl,weim-cs-gpr = <&gpr>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* pwr mcu alert irq */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+			/* remainder ???? */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
+		>;
+	};
+
+	pinctrl_ecspi3cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
+			MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
+			MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi5cs: ecspi5csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpminand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
+		>;
+	};
+
+	pinctrl_weimcs: weimcsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
+		>;
+	};
+
+	pinctrl_weimfpga: weimfpgagrp {
+		fsl,pins = <
+			/* weim misc */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
+			MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
+			MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
+			MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
+			MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
+			/* weim data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
+			MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+			/* weim address */
+			MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
+			MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
+			/* usbh1_b OC */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1_hubreset: usbh1hubresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 00bd63e63d0c..b715deb4ea46 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -44,7 +44,7 @@
 			label = "recovery";
 			gpios = <&gpio3 16 1>;
 			linux,code = <0x198>; /* KEY_RESTART */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 822ffb231c57..a51834e1dd27 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -145,7 +145,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "sst,w25q256";
+		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
 	};
@@ -154,7 +154,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
new file mode 100644
index 000000000000..005318865f66
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad SOM";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&i2c3 {
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
new file mode 100644
index 000000000000..d417457ca6db
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
+	compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
index a57866b2e97e..d1686339dc48 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
@@ -3,12 +3,42 @@
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -16,8 +46,8 @@
 #include "imx6qdl-nitrogen6x.dtsi"
 
 / {
-	model = "Freescale i.MX6 Quad Nitrogen6x Board";
-	compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
new file mode 100644
index 000000000000..5acd0c63b33b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -0,0 +1,785 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kosagi Novena Dual/Quad";
+	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_novena>;
+		power-supply = <&reg_lvds_lcd>;
+		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <12>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+		user-button {
+			label = "User Button";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0>;	/* SW_LID */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_novena>;
+
+		heartbeat {
+			label = "novena:white:panel";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n133hse-ea1", "simple-panel";
+		backlight = <&backlight>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio_codec: regulator-audio-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "es8328-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <400000>;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-display-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_lcd: regulator-lvds-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lvds-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie-bus-power";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_sata: regulator-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <10000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-es8328";
+		model = "imx-audio-es8328";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-amp-supply = <&reg_audio_codec>;
+		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Speaker", "audio-amp",
+			"Headphone", "ROUT1",
+			"Headphone", "LOUT1",
+			"LINPUT1", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <0x1>;
+		mux-ext-port = <0x3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_novena>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_novena>;
+	fsl,spi-num-chipselects = <3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_novena>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	rxc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	txen-skew-ps = <0>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <3000>;
+	txd1-skew-ps = <3000>;
+	txd2-skew-ps = <3000>;
+	txd3-skew-ps = <3000>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_novena>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_novena>;
+	status = "okay";
+
+	accel: mma8452@1c {
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sbs_battery: bq20z75@0b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,i2c-retry-count = <50>;
+	};
+
+	touch: stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe_novena>;
+		vio-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_novena>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw1c: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3a: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3b: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw4: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_snvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vref: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen3: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_vgen4: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_novena>;
+	status = "okay";
+
+	codec: es8328@11 {
+		compatible = "everest,es8328";
+		reg = <0x11>;
+		DVDD-supply = <&reg_audio_codec>;
+		AVDD-supply = <&reg_audio_codec>;
+		PVDD-supply = <&reg_audio_codec>;
+		HPVDD-supply = <&reg_audio_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_novena>;
+		clocks = <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO1_SEL>,
+				  <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+				  <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+					 <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+					 <&clks IMX6QDL_CLK_OSC>,
+					 <&clks IMX6QDL_CLK_CKO1_PODF>;
+		assigned-clock-rates = <0 0 722534400 22579200>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_novena>;
+	linux,keymap = <
+		MATRIX_KEY(1, 1, KEY_CONFIG)
+	>;
+	status = "okay";
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		fsl,panel = <&panel>;
+		status = "okay";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_novena>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_sata>;
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <8>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_novena>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_novena>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_novena>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_novena>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_swbst>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_novena>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_novena>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux_novena: audmuxgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_novena: backlightgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3_novena: ecspi3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet_novena: enetgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b028
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b028
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b028
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Ethernet reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_eim: fpgaeimgrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0f1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0f1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0f1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0f1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0f1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0f1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0f1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0f1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0f1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0f1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0f1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0f1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0f1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0f1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0f1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0f1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0f1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0f1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0f1
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0f1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0f1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb0f1
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0f1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0f1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb0f1
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK		0xb0f1
+		>;
+	};
+
+	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+		fsl,pins = <
+			/* User button */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			/* PCIe Wakeup */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1f0e0
+			/* Lid switch */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_novena: hdmigrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1_novena: i2c1grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_novena: i2c2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_novena: i2c3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp_novena: kppgrp-novena {
+		fsl,pins = <
+			/* Front panel button */
+			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
+			/* Fake column driver, not connected */
+			MX6QDL_PAD_KEY_COL1__KEY_COL1		0x1b0b1
+		>;
+	};
+
+	pinctrl_leds_novena: ledsgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
+		>;
+	};
+
+	pinctrl_pcie_novena: pciegrp-novena {
+		fsl,pins = <
+			/* Reset */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
+			/* Power On */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1
+			/* Wifi kill */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1
+		>;
+	};
+
+	pinctrl_sata_novena: satagrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_senoko_novena: senokogrp-novena {
+		fsl,pins = <
+			/* Senoko IRQ line */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
+			/* Senoko reset line */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1
+		>;
+	};
+
+	pinctrl_sound_novena: soundgrp-novena {
+		fsl,pins = <
+			/* Audio power regulator */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+			/* Headphone plug */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_stmpe_novena: stmpegrp-novena {
+		fsl,pins = <
+			/* Touchscreen interrupt */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_novena: uart2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_novena: uart3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_novena: uart4grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_novena: usbotggrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_novena: usdhc2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			/* Write protect */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+			/* Card detect */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3_novena: usdhc3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index 3c2852b16f78..90ea61ae04e9 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -23,7 +23,7 @@
 
 &ecspi3 {
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf032b";
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 96e4688be77c..66d10d8d534c 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -2,12 +2,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 5645d52850a7..0da81bc2c68a 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -91,34 +91,25 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_5p0v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 
 	sound-sgtl5000 {
@@ -205,6 +196,10 @@
 };
 
 &sata {
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <16>;
+	fsl,receive-eq-mdB = <3000>;
 	status = "okay";
 };
 
@@ -253,6 +248,9 @@
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -263,6 +261,9 @@
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -270,163 +271,160 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
 	non-removable;
 	no-1-8-v;
 	status = "okay";
 };
 
 &iomuxc {
-	imx6q-tbs2910 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
+		>;
+	};
 
-		pinctrl_hdmi: hdmigrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
-			>;
-		};
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
+		>;
+	};
 
-		pinctrl_ir: irgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
+		>;
+	};
 
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
-			>;
-		};
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
+		>;
+	};
 
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
-			>;
-		};
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
-			>;
-		};
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
-			>;
-		};
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
+		>;
+	};
 
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
-			>;
-		};
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
+		>;
 	};
 
-	gpio_fan {
-		pinctrl_gpio_fan: gpiofangrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
-			>;
-		};
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
+		>;
 	};
 
-	gpio_leds {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
-			>;
-		};
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 88aa1e4c792d..2792da93db1f 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -77,7 +77,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <22 0>;
 		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
index 20bf3c282623..9207d80f9cfb 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -13,7 +13,7 @@
 #include "imx6qdl-wandboard-revb1.dtsi"
 
 / {
-	model = "Wandboard i.MX6 Quad Board";
+	model = "Wandboard i.MX6 Quad Board rev B1";
 	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
 
 	memory {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 399103b8e2c9..cd10c8de1904 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -14,6 +14,7 @@
 
 / {
 	aliases {
+		ipu1 = &ipu2;
 		spi4 = &ecspi5;
 	};
 
@@ -21,7 +22,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
@@ -103,42 +104,6 @@
 
 			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
-
-				ipu2 {
-					pinctrl_ipu2_1: ipu2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
-							MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0x10
-							MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0x10
-							MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0x10
-							MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04        0x80000000
-							MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0x10
-							MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0x10
-							MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0x10
-							MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0x10
-							MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0x10
-							MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0x10
-							MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0x10
-							MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0x10
-							MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0x10
-							MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0x10
-							MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0x10
-							MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0x10
-							MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0x10
-							MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0x10
-							MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0x10
-							MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0x10
-							MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16  0x10
-							MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17  0x10
-							MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18  0x10
-							MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19  0x10
-							MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20  0x10
-							MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21  0x10
-							MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22  0x10
-							MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23  0x10
-						>;
-					};
-				};
 			};
 		};
 
@@ -153,6 +118,16 @@
 			status = "disabled";
 		};
 
+		gpu_vg: gpu@02204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&gpc 1>;
+		};
+
 		ipu2: ipu@02800000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -187,6 +162,7 @@
 				};
 
 				ipu2_di0_mipi: endpoint@2 {
+					remote-endpoint = <&mipi_mux_2>;
 				};
 
 				ipu2_di0_lvds0: endpoint@3 {
@@ -208,6 +184,7 @@
 				};
 
 				ipu2_di1_mipi: endpoint@2 {
+					remote-endpoint = <&mipi_mux_3>;
 				};
 
 				ipu2_di1_lvds0: endpoint@3 {
@@ -225,6 +202,11 @@
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
 	};
+
+	gpu-subsystem {
+		compatible = "fsl,imx-gpu-subsystem";
+		cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
new file mode 100644
index 000000000000..b33e5a95a0f0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -0,0 +1,984 @@
+/*
+ * Copyright 2014-2016 Toradex AG
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module";
+	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		status = "disabled";
+	};
+
+	/* DDC_I2C: I2C2_SDA/SCL on MXM3 205/207 */
+	i2cddc: i2c@0 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_ddc>;
+		gpios = <&gpio3 16 GPIO_ACTIVE_HIGH /* sda */
+			 &gpio2 30 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+		status = "disabled";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	/* on module USB hub */
+	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+		regulator-name = "usb_host_vbus_hub";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <2000>;
+		enable-active-high;
+		status = "okay";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-name = "usb_host_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_usb_host_vbus_hub>;
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6q-apalis-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@7 {
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier
+ * board)
+ */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio4>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			/* 3.25 MHz ADC clock speed */
+			st,adc-freq = <1>;
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 12-bit ADC */
+			st,mod-12b = <1>;
+			/* internal ADC reference */
+			st,ref-sel = <0>;
+			/* ADC converstion time: 80 clocks */
+			st,sample-time = <4>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+	};
+};
+
+/*
+ * GEN2_I2C, CAM: I2C3_SDA/SCL on MXM3 201/203 (unused)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "recovery";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	fsl,dte-mode;
+	fsl,uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	fsl,dte-mode;
+	fsl,uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	fsl,dte-mode;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	voltage-ranges = <3300 3300>;
+	status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	voltage-ranges = <3300 3300>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	voltage-ranges = <3300 3300>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	status = "disabled";
+};
+
+&iomuxc {
+	/* pins used on module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+
+	pinctrl_apalis_gpio1: gpio2io04grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio2: gpio2io05grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio3: gpio2io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio4: gpio2io07grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio5: gpio6io10grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio6: gpio6io09grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio7: gpio1io02grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio8: gpio1io06grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+			/* SPI1 cs */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			/* SPI2 cs */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			/* Ethernet PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			/* Ethernet PHY interrupt */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio1io04grp {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c_ddc: gpioi2cddcgrp {
+		fsl,pins = <
+			/* DDC bitbang */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+			/* DE */
+			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
+			/* HSync */
+			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
+			/* VSync */
+			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
+			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+		>;
+	};
+
+	pinctrl_ipu2_vdac: ipu2vdacgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
+			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
+			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
+			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
+			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
+			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
+			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
+			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
+			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
+			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
+			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
+			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
+			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
+			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
+			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
+			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
+			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
+			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
+			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
+			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
+		>;
+	};
+
+	pinctrl_mmc_cd: gpiommccdgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
+		fsl,pins = <
+			/* USBH_HUB_EN */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
+		fsl,pins = <
+			/* USBO1 power en */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
+		>;
+	};
+
+	pinctrl_reset_moci: gpioresetmocigrp {
+		fsl,pins = <
+			/* RESET_MOCI control */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_sd_cd: gpiosdcdgrp {
+		fsl,pins = <
+			/* SD1 CD */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dce: uart2dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart4_dte: uart4dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart5_dte: uart5dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index e26ebeb5b45c..a8f3500ee522 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -94,7 +94,7 @@
 			label = "User button";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index f4d6ae564ead..ecbc6eba6a2c 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -109,7 +109,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index a47a0399a172..7d81100e7d47 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -141,7 +141,7 @@
 	flash: m25p80@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <1>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 45e7c39e80d5..da1341d47b14 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -38,7 +38,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "m25p80";
+		compatible = "sst,sst25vf040b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 7b31fdb79ced..9d7ab6cdc9a6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -94,7 +94,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -174,6 +174,24 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -294,6 +312,24 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 1b66328a8498..8dd74e98ffd6 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -151,10 +151,25 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -275,6 +290,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
@@ -338,6 +365,15 @@
 			>;
 		};
 
+		pinctrl_ecspi3: escpi3grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+			>;
+		};
+
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
 				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
@@ -429,6 +465,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_pwm4: pwm4grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 7c51839ff934..ec3fe7444e15 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -152,10 +152,17 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -247,7 +254,7 @@
 &ldb {
 	status = "okay";
 
-	lvds-channel@1 {
+	lvds-channel@0 {
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <18>;
 		status = "okay";
@@ -280,6 +287,18 @@
 	};
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
@@ -435,6 +454,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_pwm4: pwm4grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 929e0b37bd9e..367cc49eea0d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -142,10 +142,17 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+	                  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+	                  <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -260,6 +267,8 @@
 			swbst_reg: swbst {
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			snvs_reg: vsnvs {
@@ -336,7 +345,7 @@
 &ldb {
 	status = "okay";
 
-	lvds-channel@1 {
+	lvds-channel@0 {
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <18>;
 		status = "okay";
@@ -369,9 +378,28 @@
 	};
 };
 
-&pwm4 {
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default", "state_dio";
+	pinctrl-0 = <&pinctrl_pwm4_backlight>;
+	pinctrl-1 = <&pinctrl_pwm4_dio>;
 	status = "okay";
 };
 
@@ -528,12 +556,38 @@
 			>;
 		};
 
-		pinctrl_pwm4: pwm4grp {
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
 			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4_backlight: pwm4grpbacklight {
+			fsl,pins = <
+				/* LVDS_PWM J6.5 */
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
 			>;
 		};
 
+		pinctrl_pwm4_dio: pwm4grpdio {
+			fsl,pins = <
+				/* DIO3 J16.4 */
+				MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 741f3d529e3e..118bea524dab 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -198,6 +198,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &ssi1 {
 	status = "okay";
 };
@@ -290,6 +302,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index d1e5048b00b5..f27f184558fb 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -164,6 +164,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -242,6 +254,18 @@
 			>;
 		};
 
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 6dd0b764e036..d6c2358ffad4 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -48,7 +48,7 @@
 
 	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 5 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
 	};
@@ -67,7 +67,7 @@
 		reg_usbh1_vbus: usb-h1-vbus {
 			compatible = "regulator-fixed";
 			enable-active-high;
-			gpio = <&gpio1 0 0>;
+			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
 			regulator-name = "usb_h1_vbus";
@@ -78,7 +78,7 @@
 		reg_usbotg_vbus: usb-otg-vbus {
 			compatible = "regulator-fixed";
 			enable-active-high;
-			gpio = <&gpio3 22 0>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
 			regulator-name = "usb_otg_vbus";
@@ -253,7 +253,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
-	reset-gpio = <&gpio3 4 0>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
new file mode 100644
index 000000000000..f8d945a56525
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -0,0 +1,411 @@
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD3_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	reg_sd4_vmmc: regulator-sd4-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD4_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
+		clock-names = "refclk";
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		eth_phy: ethernet-phy {
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	clocks = <&clks IMX6QDL_CLK_USBOH3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmcc-supply = <&reg_sd3_vmmc>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-witdh=<4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	vmcc-supply = <&reg_sd4_vmmc>;
+	bus-witdh=<8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059	/* PCIe Reset */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06  0x1f059	/* HUB USB Reset */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1f059	/* CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1f059	/* PWR */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
index 6d4069cc9419..86460e46d055 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
@@ -154,6 +154,7 @@
 	bus-width = <4>;
 	mmc-pwrseq = <&usdhc1_pwrseq>;
 	keep-power-in-suspend;
+	no-1-8-v;
 	non-removable;
 	vmmc-supply = <&reg_brcm>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
new file mode 100644
index 000000000000..24d7d3f18464
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -0,0 +1,630 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+	};
+
+	bt_rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_rfkill>;
+		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		name = "bt_rfkill";
+		type = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight_lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel_lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	imx6dl-nit6xlite {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_bt_rfkill: bt_rfkillgrp {
+			fsl,pins = <
+				/* BT wake */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* BT reset */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0b0b0
+				/* BT reg en */
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+				/* BT host wake irq */
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x100b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Home Button: J14 pin 5 */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Back Button: J14 pin 7 */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				/* Touch IRQ: J7 pin 4 */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+				/* tcs2004 IRQ */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+				/* tsc2004 reset */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+			>;
+		};
+
+		pinctrl_j10: j10grp {
+			fsl,pins = <
+				/* Broadcom WiFi module pins */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+
+		pinctrl_j28: j28grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+			>;
+		};
+
+		pinctrl_rtc: rtcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	vqmmc-1-8-v;
+	ocr-limit = <0x180>;     /* 1.65v - 2.1v */
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
new file mode 100644
index 000000000000..dc74aa395ff5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -0,0 +1,873 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0xF0000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p8v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	i2cmux@2 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+			     &gpio4 15 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+
+		i2c2@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2cmux@3 {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c3@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		speaker-enable {
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		ttymxc4-rs232 {
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "on";
+		};
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight_lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight_lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel_lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel_lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel_lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_max-sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <3000>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <3000>;
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "st,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&iomuxc {
+	imx6q-nitrogen6_max {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio_keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2mux: i2c2muxgrp {
+			fsl,pins = <
+				/* ov5642 camera i2c enable */
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
+				/* ov5640_mipi camera i2c enable */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				/* PCIe I2C enable */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				/* PCIe reset */
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_rv4162: rv4162grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
+				/* RS485 RX Enable: pull up */
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
+				/* RS485 DEN: pull down */
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
+				/* RS485/!RS232 Select: pull down (rs232) */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
+				/* ON: pull down */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 340bc8e42650..c6c590d1e940 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -3,12 +3,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -65,6 +95,19 @@
 			pinctrl-0 = <&pinctrl_can_xcvr>;
 			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
 		};
+
+		reg_wlan_vmmc: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
@@ -76,7 +119,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
@@ -124,7 +167,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -142,6 +185,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
@@ -182,7 +262,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -247,6 +327,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
+
+	touchscreen@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+	};
 };
 
 &iomuxc {
@@ -258,6 +353,7 @@
 			fsl,pins = <
 				/* SGTL5000 sys_mclk */
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
 			>;
 		};
 
@@ -354,6 +450,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -395,6 +524,18 @@
 			>;
 		};
 
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+			>;
+		};
+
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
@@ -418,9 +559,22 @@
 				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
 			>;
 		};
+
+		pinctrl_wlan_vmmc: wlan_vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";
 
@@ -489,6 +643,27 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 9e6ecd99b472..d6d98d426384 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -12,7 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Phytec phyFLEX-i.MX6 Ouad";
+	model = "Phytec phyFLEX-i.MX6 Quad";
 	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
 
 	memory {
@@ -80,7 +80,7 @@
 	cs-gpios = <&gpio4 24 0>;
 
 	flash@0 {
-		compatible = "m25p80";
+		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -373,7 +373,7 @@
 };
 
 &pcie {
-	pinctrl-name = "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio4 17 0>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index c37bb9ff9fac..d354d406954d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -113,14 +113,14 @@
 &clks {
 	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
 			  <&clks IMX6QDL_PLL4_BYPASS>,
-			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>,
 			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
 				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
 				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
 				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-	assigned-clock-rates = <0>, <0>, <24576000>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
 };
 
 &ecspi1 {
@@ -133,7 +133,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index ce4c7313f509..0f1aca450fe6 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -2,12 +2,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -75,7 +105,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
@@ -123,7 +153,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -141,6 +171,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
@@ -181,7 +248,7 @@
 	status = "okay";
 
 	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -348,6 +415,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -416,6 +516,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 2c07d3a86b61..0b5c4de74485 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -79,21 +79,21 @@
 		power {
 			label = "Power Button";
 			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_POWER>;
 		};
 
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
@@ -158,7 +158,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -238,6 +238,7 @@
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
+				regulator-ramp-delay = <6250>;
 			};
 
 			sw3a_reg: sw3a {
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 13cb7ccfea44..efd06b576f1d 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -41,7 +41,7 @@
 			compatible = "fixed-clock";
 			reg = <0>;
 			#clock-cells = <0>;
-			clock-frequency = <27000000>;
+			clock-frequency = <26000000>;
 		};
 	};
 
@@ -52,7 +52,7 @@
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -227,6 +227,11 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
 	phy-supply = <&reg_3v3_etn>;
@@ -276,7 +281,7 @@
 		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007@48 {
@@ -288,7 +293,7 @@
 		interrupts = <26 0>;
 		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <660>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 1211da894ee9..d3e54e40a017 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -34,6 +34,18 @@
 			gpio = <&gpio7 12 0>;
 		};
 	};
+
+	sound {
+		compatible = "fsl,imx6q-udoo-ac97",
+			     "fsl,imx-audio-ac97";
+		model = "fsl,imx6q-udoo-ac97";
+		audio-cpu = <&ssi1>;
+		audio-routing =
+			"RX", "Mic Jack",
+			"Headphone Jack", "TX";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
 };
 
 &fec {
@@ -109,6 +121,36 @@
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
 			>;
 		};
+
+		pinctrl_ac97_running: ac97running {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_warm_reset: ac97warmreset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
+
+		pinctrl_ac97_reset: ac97reset {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b0
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x1b0b0
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x1b0b0
+				MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			>;
+		};
 	};
 };
 
@@ -132,3 +174,18 @@
 	non-removable;
 	status = "okay";
 };
+
+&audmux {
+	status = "okay";
+};
+
+&ssi1 {
+	cell-index = <0>;
+	fsl,mode = "ac97-slave";
+	pinctrl-names = "ac97-running", "ac97-reset", "ac97-warm-reset";
+	pinctrl-0 = <&pinctrl_ac97_running>;
+	pinctrl-1 = <&pinctrl_ac97_reset>;
+	pinctrl-2 = <&pinctrl_ac97_warm_reset>;
+	ac97-gpios = <&gpio4 19 0 &gpio4 18 0 &gpio2 30 0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index e716e6f301c6..b42822aa14f2 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -30,6 +30,7 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		ipu0 = &ipu1;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -47,15 +48,6 @@
 		usbphy1 = &usbphy2;
 	};
 
-	intc: interrupt-controller@00a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-		interrupt-parent = <&intc>;
-	};
-
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -147,6 +139,27 @@
 			};
 		};
 
+		gpu_3d: gpu@00130000 {
+			compatible = "vivante,gc";
+			reg = <0x00130000 0x4000>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU3D_CORE>,
+				 <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+			clock-names = "bus", "core", "shader";
+			power-domains = <&gpc 1>;
+		};
+
+		gpu_2d: gpu@00134000 {
+			compatible = "vivante,gc";
+			reg = <0x00134000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_GPU2D_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&gpc 1>;
+		};
+
 		timer@00a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
@@ -155,6 +168,15 @@
 			clocks = <&clks IMX6QDL_CLK_TWD>;
 		};
 
+		intc: interrupt-controller@00a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
 		L2: l2-cache@00a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
@@ -173,8 +195,7 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
-				  0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
+			ranges = <0x81000000 0 0          0x01f80000 0 0x00010000 /* downstream I/O */
 				  0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
 			num-lanes = <1>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -218,16 +239,16 @@
 					dmas = <&sdma 14 18 0>,
 					       <&sdma 15 18 0>;
 					dma-names = "rx", "tx";
-					clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>,
-						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>,
-						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
-						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
-						 <&clks IMX6QDL_CLK_DUMMY>;
+					clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
+						 <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
+						 <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
+						 <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
 						      "rxtx3", "rxtx4",
 						      "rxtx5", "rxtx6",
-						      "rxtx7";
+						      "rxtx7", "spba";
 					status = "disabled";
 				};
 
@@ -240,7 +261,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI1>,
 						 <&clks IMX6QDL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dmas = <&sdma 3 8 1>, <&sdma 4 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -254,7 +275,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI2>,
 						 <&clks IMX6QDL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dmas = <&sdma 5 8 1>, <&sdma 6 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -268,7 +289,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI3>,
 						 <&clks IMX6QDL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dmas = <&sdma 7 8 1>, <&sdma 8 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -282,7 +303,7 @@
 					clocks = <&clks IMX6QDL_CLK_ECSPI4>,
 						 <&clks IMX6QDL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
-					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dmas = <&sdma 9 8 1>, <&sdma 10 8 2>;
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
@@ -309,7 +330,7 @@
 						 <&clks IMX6QDL_CLK_ESAI_EXTAL>,
 						 <&clks IMX6QDL_CLK_ESAI_IPG>,
 						 <&clks IMX6QDL_CLK_SPBA>;
-					clock-names = "core", "mem", "extal", "fsys", "dma";
+					clock-names = "core", "mem", "extal", "fsys", "spba";
 					dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
 					dma-names = "rx", "tx";
 					status = "disabled";
@@ -378,7 +399,7 @@
 						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
 						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
 						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
-						"asrck_d", "asrck_e", "asrck_f", "dma";
+						"asrck_d", "asrck_e", "asrck_f", "spba";
 					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
 						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
@@ -875,7 +896,6 @@
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
 				ranges = <0 0x2100000 0x10000>;
-				interrupt-parent = <&intc>;
 				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
 					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
 					 <&clks IMX6QDL_CLK_CAAM_IPG>,
@@ -906,6 +926,9 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -917,6 +940,9 @@
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -927,6 +953,9 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -937,6 +966,9 @@
 				clocks = <&clks IMX6QDL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 3>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
new file mode 100644
index 000000000000..5ce3840d83d3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabreauto.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Automotive Board";
+	compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+};
+
+&i2c2 {
+	max7322: gpio@68 {
+		compatible = "maxim,max7322";
+		reg = <0x68>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx6qdl-sabreauto {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO          0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC           0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b018
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b018
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b018
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b018
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b018
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b018
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b018
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b018
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b018
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b018
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b018
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b018
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&vgen3_reg {
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
new file mode 100644
index 000000000000..b23458062f5e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6qp.dtsi"
+#include "imx6qdl-sabresd.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board";
+	compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+};
+
+&cpu0 {
+	arm-supply = <&sw2_reg>;
+};
+
+&iomuxc {
+	imx6qdl-sabresd {
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x17059
+				MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x17059
+				MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x17059
+				MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+	};
+};
+
+&pcie {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi
new file mode 100644
index 000000000000..1ada71437e49
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp.dtsi
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+
+/ {
+	soc {
+		ocram2: sram@00940000 {
+			compatible = "mmio-sram";
+			reg = <0x00940000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ocram3: sram@00960000 {
+			compatible = "mmio-sram";
+			reg = <0x00960000 0x20000>;
+			clocks = <&clks IMX6QDL_CLK_OCRAM>;
+		};
+
+		ipu1: ipu@02400000 {
+			compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+			clocks = <&clks IMX6QDL_CLK_IPU1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0>, <&clks IMX6QDL_CLK_IPU1_DI1>,
+				 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+				 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+				 <&clks IMX6QDL_CLK_PRG0_APB>;
+			clock-names = "bus",
+				      "di0", "di1",
+				      "di0_sel", "di1_sel",
+				      "ldb_di0", "ldb_di1", "prg";
+		};
+
+		ipu2: ipu@02800000 {
+			compatible = "fsl,imx6qp-ipu", "fsl,imx6q-ipu";
+			clocks = <&clks IMX6QDL_CLK_IPU2>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0>, <&clks IMX6QDL_CLK_IPU2_DI1>,
+				 <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+				 <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>,
+				 <&clks IMX6QDL_CLK_PRG1_APB>;
+			clock-names = "bus",
+				      "di0", "di1",
+				      "di0_sel", "di1_sel",
+				      "ldb_di0", "ldb_di1", "prg";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index b84dff2e94ea..be118820e9f7 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -126,7 +126,7 @@
 	flash: m25p80@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 10c69963100f..058bcdceb81a 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -118,7 +118,7 @@
 	bus-width = <4>;
 	non-removable;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	mmc-pwrseq = <&usdhc3_pwrseq>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 320a27f8889e..d12b250342a6 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -135,8 +135,24 @@
 				ranges;
 
 				spdif: spdif@02004000 {
+					compatible = "fsl,imx6sl-spdif",
+						"fsl,imx35-spdif";
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>,
+						<&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>,
+						 <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>,
+						 <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						"rxtx1", "rxtx2",
+						"rxtx3", "rxtx4",
+						"rxtx5", "rxtx6",
+						"rxtx7", "spba";
+					status = "disabled";
 				};
 
 				ecspi1: ecspi@02008000 {
@@ -670,8 +686,11 @@
 			};
 
 			dcp: dcp@020fc000 {
+				compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp";
 				reg = <0x020fc000 0x4000>;
-				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 101 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -689,6 +708,9 @@
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -699,6 +721,9 @@
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -709,6 +734,9 @@
 				clocks = <&clks IMX6SL_CLK_USBOH3>;
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 115f3fd78971..96ea936eeeb0 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -52,7 +52,7 @@
 	cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	vmmc-supply = <&vcc_sd3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index c76b87cba275..71005478cdf0 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -129,7 +129,7 @@
 		reg = <0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl128s";
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
 		spi-max-frequency = <66000000>;
 	};
 
@@ -137,7 +137,7 @@
 		reg = <1>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl128s";
+		compatible = "spansion,s25fl128s", "jedec,spi-nor";
 		spi-max-frequency = <66000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 0bfc4e7865b2..0ad164ab5729 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -130,7 +130,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		reg = <0>;
 	};
@@ -138,7 +138,7 @@
 	flash1: n25q256a@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		reg = <1>;
 	};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index ac88c3467078..f1d37306e8bf 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -114,7 +114,7 @@
 			regulator-name = "peri_3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 			regulator-always-on;
 		};
@@ -184,6 +184,13 @@
 	status = "okay";
 };
 
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
 &i2c4 {
         clock-frequency = <100000>;
         pinctrl-names = "default";
@@ -283,7 +290,7 @@
 	non-removable;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	status = "okay";
 };
 
@@ -296,7 +303,7 @@
 	cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	vmmc-supply = <&vcc_sd3>;
 	status = "okay";
 };
@@ -378,6 +385,13 @@
 			>;
 		};
 
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_ROW4__I2C3_SDA		0x4001b8b1
+				MX6SX_PAD_KEY_COL4__I2C3_SCL		0x4001b8b1
+			>;
+		};
+
 		pinctrl_i2c4: i2c4grp {
 			fsl,pins = <
 				MX6SX_PAD_CSI_DATA07__I2C4_SDA		0x4001b8b1
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index c94f2ea2316e..a5f76025a0ce 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -211,7 +211,7 @@
 					dmas = <&sdma 14 18 0>,
 					       <&sdma 15 18 0>;
 					dma-names = "rx", "tx";
-					clocks = <&clks IMX6SX_CLK_SPDIF>,
+					clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>,
 						 <&clks IMX6SX_CLK_OSC>,
 						 <&clks IMX6SX_CLK_SPDIF>,
 						 <&clks 0>, <&clks 0>, <&clks 0>,
@@ -222,7 +222,7 @@
 						      "rxtx1", "rxtx2",
 						      "rxtx3", "rxtx4",
 						      "rxtx5", "rxtx6",
-						      "rxtx7", "dma";
+						      "rxtx7", "spba";
 					status = "disabled";
 				};
 
@@ -295,7 +295,7 @@
 						 <&clks IMX6SX_CLK_ESAI_IPG>,
 						 <&clks IMX6SX_CLK_SPBA>;
 					clock-names = "core", "mem", "extal",
-						      "fsys", "dma";
+						      "fsys", "spba";
 					status = "disabled";
 				};
 
@@ -348,7 +348,7 @@
 						 <&clks IMX6SX_CLK_ASRC_IPG>,
 						 <&clks IMX6SX_CLK_SPDIF>,
 						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck", "dma";
+					clock-names = "mem", "ipg", "asrck", "spba";
 					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
 					       <&sdma 19 20 1>, <&sdma 20 20 1>,
 					       <&sdma 21 20 1>, <&sdma 22 20 1>;
@@ -783,6 +783,9 @@
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -793,6 +796,9 @@
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -805,6 +811,9 @@
 				phy_type = "hsic";
 				fsl,anatop = <&anatop>;
 				dr_mode = "host";
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -1152,6 +1161,8 @@
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_IPG>;
 				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
 				status = "disabled";
                         };
 
@@ -1161,6 +1172,8 @@
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_IPG>;
 				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
 				status = "disabled";
                         };
 
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index 25746b122ea6..720728001d3c 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -8,7 +8,6 @@
 
 /dts-v1/;
 
-#include <dt-bindings/input/input.h>
 #include "imx6ul.dtsi"
 
 / {
@@ -87,6 +86,19 @@
 	};
 };
 
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -118,7 +130,7 @@
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	vmmc-supply = <&reg_sd1_vmmc>;
 	status = "okay";
 };
@@ -128,7 +140,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	no-1-8-v;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	status = "okay";
 };
 
@@ -277,6 +289,15 @@
 		>;
 	};
 
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
diff --git a/arch/arm/boot/dts/imx6ul-pinfunc.h b/arch/arm/boot/dts/imx6ul-pinfunc.h
index 20c7da1affce..0034eeb84542 100644
--- a/arch/arm/boot/dts/imx6ul-pinfunc.h
+++ b/arch/arm/boot/dts/imx6ul-pinfunc.h
@@ -14,925 +14,925 @@
  * The pin function ID is a tuple of
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
-#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10				0x0014 0x02a0 0x0000 5 0
-#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11				0x0018 0x02a4 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE0__GPIO5_IO10		0x0014 0x02a0 0x0000 5 0
+#define MX6UL_PAD_BOOT_MODE1__GPIO5_IO11		0x0018 0x02a4 0x0000 5 0
 
-#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00				0x001c 0x02a8 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01				0x0020 0x02ac 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02				0x0024 0x02b0 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03				0x0028 0x02b4 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04				0x002c 0x02b8 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05				0x0030 0x02bc 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06				0x0034 0x02c0 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07				0x0038 0x02c4 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08				0x003c 0x02c8 0x0000 5 0
-#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09				0x0040 0x02cc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00		0x001c 0x02a8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01		0x0020 0x02ac 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02		0x0024 0x02b0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03		0x0028 0x02b4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04		0x002c 0x02b8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05		0x0030 0x02bc 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06		0x0034 0x02c0 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07		0x0038 0x02c4 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08		0x003c 0x02c8 0x0000 5 0
+#define MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09		0x0040 0x02cc 0x0000 5 0
 
-#define MX6UL_PAD_JTAG_MOD__SJC_MOD                              	0x0044 0x02d0 0x0000 0 0
-#define MX6UL_PAD_JTAG_MOD__GPT2_CLK                             	0x0044 0x02d0 0x05a0 1 0
-#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT                            	0x0044 0x02d0 0x0000 2 0
-#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M                    	0x0044 0x02d0 0x0000 3 0
-#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY                         	0x0044 0x02d0 0x04c0 4 0
-#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10                           	0x0044 0x02d0 0x0000 5 0
-#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00                     	0x0044 0x02d0 0x0000 6 0
-#define MX6UL_PAD_JTAG_TMS__SJC_TMS                              	0x0048 0x02d4 0x0000 0 0
-#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1                        	0x0048 0x02d4 0x0598 1 0
-#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK                            	0x0048 0x02d4 0x0000 2 0
-#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1                            	0x0048 0x02d4 0x0000 3 0
-#define MX6UL_PAD_JTAG_TMS__CCM_WAIT                             	0x0048 0x02d4 0x0000 4 0
-#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11                           	0x0048 0x02d4 0x0000 5 0
-#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01                     	0x0048 0x02d4 0x0000 6 0
-#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT                            	0x0048 0x02d4 0x0000 8 0
-#define MX6UL_PAD_JTAG_TDO__SJC_TDO                              	0x004c 0x02d8 0x0000 0 0
-#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2                        	0x004c 0x02d8 0x059c 1 0
-#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC                         	0x004c 0x02d8 0x05fc 2 0
-#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2                            	0x004c 0x02d8 0x0000 3 0
-#define MX6UL_PAD_JTAG_TDO__CCM_STOP                             	0x004c 0x02d8 0x0000 4 0
-#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12                           	0x004c 0x02d8 0x0000 5 0
-#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT                            	0x004c 0x02d8 0x0000 6 0
-#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT                            	0x004c 0x02d8 0x0000 8 0
-#define MX6UL_PAD_JTAG_TDI__SJC_TDI                              	0x0050 0x02dc 0x0000 0 0
-#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1                        	0x0050 0x02dc 0x0000 1 0
-#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK                         	0x0050 0x02dc 0x05f8 2 0
-#define MX6UL_PAD_JTAG_TDI__PWM6_OUT                             	0x0050 0x02dc 0x0000 4 0
-#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13                           	0x0050 0x02dc 0x0000 5 0
-#define MX6UL_PAD_JTAG_TDI__MQS_LEFT                             	0x0050 0x02dc 0x0000 6 0
-#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL                      	0x0050 0x02dc 0x0000 8 0
-#define MX6UL_PAD_JTAG_TCK__SJC_TCK                              	0x0054 0x02e0 0x0000 0 0
-#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2                        	0x0054 0x02e0 0x0000 1 0
-#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA                         	0x0054 0x02e0 0x0000 2 0
-#define MX6UL_PAD_JTAG_TCK__PWM7_OUT                             	0x0054 0x02e0 0x0000 4 0
-#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14                           	0x0054 0x02e0 0x0000 5 0
-#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL                      	0x0054 0x02e0 0x0000 8 0
-#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB                         	0x0058 0x02e4 0x0000 0 0
-#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3                     	0x0058 0x02e4 0x0000 1 0
-#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA                      	0x0058 0x02e4 0x0000 2 0
-#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT                          	0x0058 0x02e4 0x0000 4 0
-#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15                        	0x0058 0x02e4 0x0000 5 0
-#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS                  	0x0058 0x02e4 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL                           	0x005c 0x02e8 0x05ac 0 1
-#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1                      	0x005c 0x02e8 0x058c 1 0
-#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID                     	0x005c 0x02e8 0x04b8 2 0
-#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1                     	0x005c 0x02e8 0x0574 3 0
-#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT                          	0x005c 0x02e8 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00                         	0x005c 0x02e8 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN               	0x005c 0x02e8 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET                   	0x005c 0x02e8 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B                       	0x005c 0x02e8 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA                           	0x0060 0x02ec 0x05b0 0 1
-#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1                      	0x0060 0x02ec 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC                        	0x0060 0x02ec 0x0664 2 0
-#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2                     	0x0060 0x02ec 0x057c 3 0
-#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT                           	0x0060 0x02ec 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01                         	0x0060 0x02ec 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT              	0x0060 0x02ec 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET                    	0x0060 0x02ec 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B                       	0x0060 0x02ec 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL                           	0x0064 0x02f0 0x05a4 0 0
-#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2                      	0x0064 0x02f0 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR                       	0x0064 0x02f0 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M                  	0x0064 0x02f0 0x0000 3 0
-#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP                          	0x0064 0x02f0 0x066c 4 0
-#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02                         	0x0064 0x02f0 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00                   	0x0064 0x02f0 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET                   	0x0064 0x02f0 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX                           	0x0064 0x02f0 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX                           	0x0064 0x02f0 0x0624 8 0
-#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA                           	0x0068 0x02f4 0x05a8 0 1
-#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3                      	0x0068 0x02f4 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC                        	0x0068 0x02f4 0x0660 2 0
-#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B                        	0x0068 0x02f4 0x0668 4 0
-#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03                         	0x0068 0x02f4 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK                    	0x0068 0x02f4 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK                     	0x0068 0x02f4 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX                           	0x0068 0x02f4 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX                           	0x0068 0x02f4 0x0624 8 1
-#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1                     	0x006c 0x02f8 0x0574 0 1
-#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT                           	0x006c 0x02f8 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR                       	0x006c 0x02f8 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B                     	0x006c 0x02f8 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04                         	0x006c 0x02f8 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN               	0x006c 0x02f8 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX                           	0x006c 0x02f8 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX                           	0x006c 0x02f8 0x0644 8 2
-#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2                     	0x0070 0x02fc 0x057c 0 1
-#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT                           	0x0070 0x02fc 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID                     	0x0070 0x02fc 0x04bc 2 0
-#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD                          	0x0070 0x02fc 0x0530 3 0
-#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT                     	0x0070 0x02fc 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05                         	0x0070 0x02fc 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT              	0x0070 0x02fc 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX                           	0x0070 0x02fc 0x0644 8 3
-#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX                           	0x0070 0x02fc 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO                         	0x0074 0x0300 0x0578 0 0
-#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO                         	0x0074 0x0300 0x0580 1 0
-#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE                   	0x0074 0x0300 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK                           	0x0074 0x0300 0x0000 3 0
-#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP                          	0x0074 0x0300 0x069c 4 0
-#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06                         	0x0074 0x0300 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT                           	0x0074 0x0300 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B                       	0x0074 0x0300 0x0000 7 0
-#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS                      	0x0074 0x0300 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS                      	0x0074 0x0300 0x0620 8 0
-#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC                          	0x0078 0x0304 0x0000 0 0
-#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC                          	0x0078 0x0304 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE                  	0x0078 0x0304 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK                         	0x0078 0x0304 0x0528 3 0
-#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B                        	0x0078 0x0304 0x0674 4 1
-#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07                         	0x0078 0x0304 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO07__CCM_STOP                           	0x0078 0x0304 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS                      	0x0078 0x0304 0x0620 8 1
-#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS                      	0x0078 0x0304 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT                           	0x007c 0x0308 0x0000 0 0
-#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B                       	0x007c 0x0308 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT                          	0x007c 0x0308 0x0000 2 0
-#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC                          	0x007c 0x0308 0x052c 3 1
-#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT                     	0x007c 0x0308 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08                         	0x007c 0x0308 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY                       	0x007c 0x0308 0x04c0 6 1
-#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS                      	0x007c 0x0308 0x0640 8 1
-#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS                      	0x007c 0x0308 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT                           	0x0080 0x030c 0x0000 0 0
-#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY                     	0x0080 0x030c 0x0000 1 0
-#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN                           	0x0080 0x030c 0x0618 2 0
-#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC                          	0x0080 0x030c 0x0524 3 1
-#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B                     	0x0080 0x030c 0x0000 4 0
-#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09                         	0x0080 0x030c 0x0000 5 0
-#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B                     	0x0080 0x030c 0x0000 6 0
-#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS                      	0x0080 0x030c 0x0000 8 0
-#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS                      	0x0080 0x030c 0x0640 8 2
-#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX                        	0x0084 0x0310 0x0000 0 0
-#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX                        	0x0084 0x0310 0x0624 0 2
-#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02                   	0x0084 0x0310 0x0000 1 0
-#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL                        	0x0084 0x0310 0x05b4 2 0
-#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02                      	0x0084 0x0310 0x0000 3 0
-#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1                   	0x0084 0x0310 0x0000 4 0
-#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16                      	0x0084 0x0310 0x0000 5 0
-#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT                       	0x0084 0x0310 0x0000 8 0
-#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX                        	0x0088 0x0314 0x0624 0 3
-#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX                        	0x0088 0x0314 0x0000 0 0
-#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03                   	0x0088 0x0314 0x0000 1 0
-#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA                        	0x0088 0x0314 0x05b8 2 0
-#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03                      	0x0088 0x0314 0x0000 3 0
-#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK                        	0x0088 0x0314 0x0594 4 0
-#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17                      	0x0088 0x0314 0x0000 5 0
-#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN                        	0x0088 0x0314 0x0000 8 0
-#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS                     	0x008c 0x0318 0x0000 0 0
-#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS                     	0x008c 0x0318 0x0620 0 2
-#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK                      	0x008c 0x0318 0x0000 1 0
-#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP                         	0x008c 0x0318 0x066c 2 1
-#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04                        	0x008c 0x0318 0x0000 3 0
-#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN              	0x008c 0x0318 0x0000 4 0
-#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18                        	0x008c 0x0318 0x0000 5 0
-#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP                         	0x008c 0x0318 0x0000 8 0
-#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS                     	0x0090 0x031c 0x0620 0 3
-#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS                     	0x0090 0x031c 0x0000 0 0
-#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER                       	0x0090 0x031c 0x0000 1 0
-#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B                       	0x0090 0x031c 0x0668 2 1
-#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05                        	0x0090 0x031c 0x0000 3 0
-#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT             	0x0090 0x031c 0x0000 4 0
-#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19                        	0x0090 0x031c 0x0000 5 0
-#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B                       	0x0090 0x031c 0x0000 8 0
-#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX                        	0x0094 0x0320 0x0000 0 0
-#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX                        	0x0094 0x0320 0x062c 0 0
-#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02                   	0x0094 0x0320 0x0000 1 0
-#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL                        	0x0094 0x0320 0x05bc 2 0
-#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06                      	0x0094 0x0320 0x0000 3 0
-#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1                   	0x0094 0x0320 0x058c 4 1
-#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20                      	0x0094 0x0320 0x0000 5 0
-#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0                      	0x0094 0x0320 0x0000 8 0
-#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX                        	0x0098 0x0324 0x062c 0 1
-#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX                        	0x0098 0x0324 0x0000 0 0
-#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03                   	0x0098 0x0324 0x0000 1 0
-#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA                        	0x0098 0x0324 0x05c0 2 0
-#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07                      	0x0098 0x0324 0x0000 3 0
-#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2                   	0x0098 0x0324 0x0590 4 0
-#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21                      	0x0098 0x0324 0x0000 5 0
-#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE                        	0x0098 0x0324 0x0000 7 0
-#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK                     	0x0098 0x0324 0x0000 8 0
-#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS                     	0x009c 0x0328 0x0000 0 0
-#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS                     	0x009c 0x0328 0x0628 0 0
-#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS                         	0x009c 0x0328 0x0000 1 0
-#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX                       	0x009c 0x0328 0x0000 2 0
-#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08                        	0x009c 0x0328 0x0000 3 0
-#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2                     	0x009c 0x0328 0x0000 4 0
-#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22                        	0x009c 0x0328 0x0000 5 0
-#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B                          	0x009c 0x0328 0x0000 7 0
-#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI                       	0x009c 0x0328 0x0000 8 0
-#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS                     	0x00a0 0x032c 0x0628 0 1
-#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS                     	0x00a0 0x032c 0x0000 0 0
-#define MX6UL_PAD_UART2_RTS_B__ENET1_COL                         	0x00a0 0x032c 0x0000 1 0
-#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX                       	0x00a0 0x032c 0x0588 2 0
-#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09                        	0x00a0 0x032c 0x0000 3 0
-#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3                     	0x00a0 0x032c 0x0000 4 0
-#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23                        	0x00a0 0x032c 0x0000 5 0
-#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL                          	0x00a0 0x032c 0x0000 7 0
-#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO                       	0x00a0 0x032c 0x0000 8 0
-#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX                        	0x00a4 0x0330 0x0000 0 0
-#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX                        	0x00a4 0x0330 0x0634 0 0
-#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02                   	0x00a4 0x0330 0x0000 1 0
-#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD                   	0x00a4 0x0330 0x0000 2 0
-#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01                      	0x00a4 0x0330 0x0000 3 0
-#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS                   	0x00a4 0x0330 0x0000 4 0
-#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS                   	0x00a4 0x0330 0x0628 4 2
-#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24                      	0x00a4 0x0330 0x0000 5 0
-#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT                    	0x00a4 0x0330 0x0000 7 0
-#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID                  	0x00a4 0x0330 0x0000 8 0
-#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX                        	0x00a8 0x0334 0x0634 0 1
-#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX                        	0x00a8 0x0334 0x0000 0 0
-#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03                   	0x00a8 0x0334 0x0000 1 0
-#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD                   	0x00a8 0x0334 0x0000 2 0
-#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00                      	0x00a8 0x0334 0x0000 3 0
-#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS                   	0x00a8 0x0334 0x0628 4 3
-#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS                   	0x00a8 0x0334 0x0000 4 0
-#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25                      	0x00a8 0x0334 0x0000 5 0
-#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT                       	0x00a8 0x0334 0x0000 8 0
-#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS                     	0x00ac 0x0338 0x0000 0 0
-#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS                     	0x00ac 0x0338 0x0630 0 0
-#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK                      	0x00ac 0x0338 0x0000 1 0
-#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX                       	0x00ac 0x0338 0x0000 2 0
-#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10                        	0x00ac 0x0338 0x0000 3 0
-#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN              	0x00ac 0x0338 0x0000 4 0
-#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26                        	0x00ac 0x0338 0x0000 5 0
-#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT                         	0x00ac 0x0338 0x0000 8 0
-#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS                     	0x00b0 0x033c 0x0630 0 1
-#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS                     	0x00b0 0x033c 0x0000 0 0
-#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER                       	0x00b0 0x033c 0x0000 1 0
-#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX                       	0x00b0 0x033c 0x0584 2 0
-#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11                        	0x00b0 0x033c 0x0000 3 0
-#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT             	0x00b0 0x033c 0x0000 4 0
-#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27                        	0x00b0 0x033c 0x0000 5 0
-#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B                      	0x00b0 0x033c 0x0000 8 0
-#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX                        	0x00b4 0x0340 0x0000 0 0
-#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX                        	0x00b4 0x0340 0x063c 0 0
-#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02                   	0x00b4 0x0340 0x0000 1 0
-#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL                        	0x00b4 0x0340 0x05a4 2 1
-#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12                      	0x00b4 0x0340 0x0000 3 0
-#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02             	0x00b4 0x0340 0x0000 4 0
-#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28                      	0x00b4 0x0340 0x0000 5 0
-#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK                     	0x00b4 0x0340 0x0000 8 0
-#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX                        	0x00b8 0x0344 0x063c 0 1
-#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX                        	0x00b8 0x0344 0x0000 0 0
-#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03                   	0x00b8 0x0344 0x0000 1 0
-#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA                        	0x00b8 0x0344 0x05a8 2 2
-#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13                      	0x00b8 0x0344 0x0000 3 0
-#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01             	0x00b8 0x0344 0x0000 4 0
-#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29                      	0x00b8 0x0344 0x0000 5 0
-#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0                      	0x00b8 0x0344 0x0000 8 0
-#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30                      	0x00bc 0x0348 0x0000 5 0
-#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI                     	0x00bc 0x0348 0x0000 8 0
-#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX                        	0x00bc 0x0348 0x0000 0 0
-#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX                        	0x00bc 0x0348 0x0644 0 4
-#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS                       	0x00bc 0x0348 0x0000 1 0
-#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL                        	0x00bc 0x0348 0x05ac 2 2
-#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14                      	0x00bc 0x0348 0x0000 3 0
-#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00             	0x00bc 0x0348 0x0000 4 0
-#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX                        	0x00c0 0x034c 0x0644 0 5
-#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX                        	0x00c0 0x034c 0x0000 0 0
-#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL                       	0x00c0 0x034c 0x0000 1 0
-#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA                        	0x00c0 0x034c 0x05b0 2 2
-#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15                      	0x00c0 0x034c 0x0000 3 0
-#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB                 	0x00c0 0x034c 0x0000 4 0
-#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31                      	0x00c0 0x034c 0x0000 5 0
-#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO                     	0x00c0 0x034c 0x0000 8 0
-#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00                  	0x00c4 0x0350 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS                  	0x00c4 0x0350 0x0638 1 0
-#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS                  	0x00c4 0x0350 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT                       	0x00c4 0x0350 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16                     	0x00c4 0x0350 0x0000 3 0
-#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX                    	0x00c4 0x0350 0x0000 4 0
-#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00                     	0x00c4 0x0350 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00                      	0x00c4 0x0350 0x0000 6 0
-#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL                    	0x00c4 0x0350 0x0000 8 0
-#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01                  	0x00c8 0x0354 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS                  	0x00c8 0x0354 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS                  	0x00c8 0x0354 0x0638 1 1
-#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT                       	0x00c8 0x0354 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17                     	0x00c8 0x0354 0x0000 3 0
-#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX                    	0x00c8 0x0354 0x0584 4 1
-#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01                     	0x00c8 0x0354 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00                      	0x00c8 0x0354 0x0000 6 0
-#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL                    	0x00c8 0x0354 0x0000 8 0
-#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN                       	0x00cc 0x0358 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS                     	0x00cc 0x0358 0x0640 1 3
-#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS                     	0x00cc 0x0358 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18                        	0x00cc 0x0358 0x0000 3 0
-#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX                       	0x00cc 0x0358 0x0000 4 0
-#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02                        	0x00cc 0x0358 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01                         	0x00cc 0x0358 0x0000 6 0
-#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT                    	0x00cc 0x0358 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00                  	0x00d0 0x035c 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS                  	0x00d0 0x035c 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS                  	0x00d0 0x035c 0x0640 1 4
-#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19                     	0x00d0 0x035c 0x0000 3 0
-#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX                    	0x00d0 0x035c 0x0588 4 1
-#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03                     	0x00d0 0x035c 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01                      	0x00d0 0x035c 0x0000 6 0
-#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT                 	0x00d0 0x035c 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01                  	0x00d4 0x0360 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS                  	0x00d4 0x0360 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS                  	0x00d4 0x0360 0x0648 1 2
-#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT                       	0x00d4 0x0360 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20                     	0x00d4 0x0360 0x0000 3 0
-#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO                     	0x00d4 0x0360 0x0580 4 1
-#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04                     	0x00d4 0x0360 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02                      	0x00d4 0x0360 0x0000 6 0
-#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB           	0x00d4 0x0360 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN                       	0x00d8 0x0364 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS                     	0x00d8 0x0364 0x0648 1 3
-#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS                     	0x00d8 0x0364 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT                          	0x00d8 0x0364 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21                        	0x00d8 0x0364 0x0000 3 0
-#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC                         	0x00d8 0x0364 0x0000 4 0
-#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05                        	0x00d8 0x0364 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02                         	0x00d8 0x0364 0x0000 6 0
-#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB              	0x00d8 0x0364 0x0000 8 0
-#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK                     	0x00dc 0x0368 0x0000 0 0
-#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS                    	0x00dc 0x0368 0x0000 1 0
-#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS                    	0x00dc 0x0368 0x0650 1 0
-#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT                         	0x00dc 0x0368 0x0000 2 0
-#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22                       	0x00dc 0x0368 0x0000 3 0
-#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                   	0x00dc 0x0368 0x0574 4 2
-#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06                       	0x00dc 0x0368 0x0000 5 0
-#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03                        	0x00dc 0x0368 0x0000 6 0
-#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK                         	0x00dc 0x0368 0x0000 8 0
-#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER                       	0x00e0 0x036c 0x0000 0 0
-#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS                     	0x00e0 0x036c 0x0650 1 1
-#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS                     	0x00e0 0x036c 0x0000 1 0
-#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT                          	0x00e0 0x036c 0x0000 2 0
-#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23                        	0x00e0 0x036c 0x0000 3 0
-#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE                           	0x00e0 0x036c 0x0000 4 0
-#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07                        	0x00e0 0x036c 0x0000 5 0
-#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03                         	0x00e0 0x036c 0x0000 6 0
-#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2                     	0x00e0 0x036c 0x0000 8 0
-#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00                  	0x00e4 0x0370 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX                       	0x00e4 0x0370 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX                    	0x00e4 0x0370 0x064c 1 1
-#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD                	0x00e4 0x0370 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL                       	0x00e4 0x0370 0x05b4 3 1
-#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO                     	0x00e4 0x0370 0x0578 4 1
-#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08                     	0x00e4 0x0370 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04                      	0x00e4 0x0370 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR                   	0x00e4 0x0370 0x0000 8 0
-#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01                  	0x00e8 0x0374 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX                       	0x00e8 0x0374 0x064c 1 2
-#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX                       	0x00e8 0x0374 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK                 	0x00e8 0x0374 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA                       	0x00e8 0x0374 0x05b8 3 1
-#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC                      	0x00e8 0x0374 0x0000 4 0
-#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09                     	0x00e8 0x0374 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04                      	0x00e8 0x0374 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC                    	0x00e8 0x0374 0x0000 8 0
-#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN                       	0x00ec 0x0378 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX                          	0x00ec 0x0378 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX                          	0x00ec 0x0378 0x0654 1 0
-#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B                  	0x00ec 0x0378 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL                          	0x00ec 0x0378 0x05bc 3 1
-#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26                        	0x00ec 0x0378 0x0000 4 0
-#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10                        	0x00ec 0x0378 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05                         	0x00ec 0x0378 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M                 	0x00ec 0x0378 0x0000 8 0
-#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00                  	0x00f0 0x037c 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX                       	0x00f0 0x037c 0x0654 1 1
-#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX                       	0x00f0 0x037c 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN                	0x00f0 0x037c 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA                       	0x00f0 0x037c 0x05c0 3 1
-#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02                     	0x00f0 0x037c 0x0000 4 0
-#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11                     	0x00f0 0x037c 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05                      	0x00f0 0x037c 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01                  	0x00f4 0x0380 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX                       	0x00f4 0x0380 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX                       	0x00f4 0x0380 0x065c 1 0
-#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD                	0x00f4 0x0380 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK                    	0x00f4 0x0380 0x0564 3 0
-#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03                     	0x00f4 0x0380 0x0000 4 0
-#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12                     	0x00f4 0x0380 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06                      	0x00f4 0x0380 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR                   	0x00f4 0x0380 0x0000 8 0
-#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN                       	0x00f8 0x0384 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX                          	0x00f8 0x0384 0x065c 1 1
-#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX                          	0x00f8 0x0384 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK                    	0x00f8 0x0384 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI                       	0x00f8 0x0384 0x056c 3 0
-#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN                  	0x00f8 0x0384 0x0000 4 0
-#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13                        	0x00f8 0x0384 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06                         	0x00f8 0x0384 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC                       	0x00f8 0x0384 0x0000 8 0
-#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK                     	0x00fc 0x0388 0x0000 0 0
-#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS                    	0x00fc 0x0388 0x0000 1 0
-#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS                    	0x00fc 0x0388 0x0658 1 0
-#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B                 	0x00fc 0x0388 0x0000 2 0
-#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO                      	0x00fc 0x0388 0x0568 3 0
-#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                   	0x00fc 0x0388 0x057c 4 2
-#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14                       	0x00fc 0x0388 0x0000 5 0
-#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07                        	0x00fc 0x0388 0x0000 6 0
-#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID                   	0x00fc 0x0388 0x0000 8 0
-#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER                       	0x0100 0x038c 0x0000 0 0
-#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS                     	0x0100 0x038c 0x0658 1 1
-#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS                     	0x0100 0x038c 0x0000 1 0
-#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN                   	0x0100 0x038c 0x0000 2 0
-#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0                        	0x0100 0x038c 0x0000 3 0
-#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25                        	0x0100 0x038c 0x0000 4 0
-#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15                        	0x0100 0x038c 0x0000 5 0
-#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07                         	0x0100 0x038c 0x0000 6 0
-#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY                    	0x0100 0x038c 0x0000 8 0
-#define MX6UL_PAD_LCD_CLK__LCDIF_CLK                             	0x0104 0x0390 0x0000 0 0
-#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN                          	0x0104 0x0390 0x0000 1 0
-#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX                              	0x0104 0x0390 0x0000 2 0
-#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX                              	0x0104 0x0390 0x063c 2 2
-#define MX6UL_PAD_LCD_CLK__SAI3_MCLK                             	0x0104 0x0390 0x0000 3 0
-#define MX6UL_PAD_LCD_CLK__EIM_CS2_B                             	0x0104 0x0390 0x0000 4 0
-#define MX6UL_PAD_LCD_CLK__GPIO3_IO00                            	0x0104 0x0390 0x0000 5 0
-#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB                  	0x0104 0x0390 0x0000 8 0
-#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE                       	0x0108 0x0394 0x0000 0 0
-#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E                         	0x0108 0x0394 0x0000 1 0
-#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX                           	0x0108 0x0394 0x063c 2 3
-#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX                           	0x0108 0x0394 0x0000 2 0
-#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC                       	0x0108 0x0394 0x060c 3 0
-#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B                          	0x0108 0x0394 0x0000 4 0
-#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01                         	0x0108 0x0394 0x0000 5 0
-#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY                         	0x0108 0x0394 0x0000 8 0
-#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC                         	0x010c 0x0398 0x05dc 0 0
-#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS                            	0x010c 0x0398 0x0000 1 0
-#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS                       	0x010c 0x0398 0x0000 2 0
-#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS                       	0x010c 0x0398 0x0638 2 2
-#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK                        	0x010c 0x0398 0x0608 3 0
-#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB                	0x010c 0x0398 0x0000 4 0
-#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02                          	0x010c 0x0398 0x0000 5 0
-#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1                          	0x010c 0x0398 0x0000 8 0
-#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC                         	0x0110 0x039c 0x0000 0 0
-#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY                          	0x0110 0x039c 0x05dc 1 1
-#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS                       	0x0110 0x039c 0x0638 2 3
-#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS                       	0x0110 0x039c 0x0000 2 0
-#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA                        	0x0110 0x039c 0x0000 3 0
-#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B                        	0x0110 0x039c 0x0000 4 0
-#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03                          	0x0110 0x039c 0x0000 5 0
-#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2                          	0x0110 0x039c 0x0000 8 0
-#define MX6UL_PAD_LCD_RESET__LCDIF_RESET                         	0x0114 0x03a0 0x0000 0 0
-#define MX6UL_PAD_LCD_RESET__LCDIF_CS                            	0x0114 0x03a0 0x0000 1 0
-#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI                    	0x0114 0x03a0 0x0000 2 0
-#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA                        	0x0114 0x03a0 0x0000 3 0
-#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY                      	0x0114 0x03a0 0x0000 4 0
-#define MX6UL_PAD_LCD_RESET__GPIO3_IO04                          	0x0114 0x03a0 0x0000 5 0
-#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3                          	0x0114 0x03a0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00                       	0x0118 0x03a4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA00__PWM1_OUT                           	0x0118 0x03a4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN               	0x0118 0x03a4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA00__I2C3_SDA                           	0x0118 0x03a4 0x05b8 4 2
-#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05                         	0x0118 0x03a4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00                       	0x0118 0x03a4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK                          	0x0118 0x03a4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01                       	0x011c 0x03a8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA01__PWM2_OUT                           	0x011c 0x03a8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT              	0x011c 0x03a8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA01__I2C3_SCL                           	0x011c 0x03a8 0x05b4 4 2
-#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06                         	0x011c 0x03a8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01                       	0x011c 0x03a8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC                       	0x011c 0x03a8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02                       	0x0120 0x03ac 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA02__PWM3_OUT                           	0x0120 0x03ac 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN               	0x0120 0x03ac 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA02__I2C4_SDA                           	0x0120 0x03ac 0x05c0 4 2
-#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07                         	0x0120 0x03ac 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02                       	0x0120 0x03ac 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK                       	0x0120 0x03ac 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03                       	0x0124 0x03b0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA03__PWM4_OUT                           	0x0124 0x03b0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT              	0x0124 0x03b0 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA03__I2C4_SCL                           	0x0124 0x03b0 0x05bc 4 2
-#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08                         	0x0124 0x03b0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03                       	0x0124 0x03b0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA                       	0x0124 0x03b0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04                       	0x0128 0x03b4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS                      	0x0128 0x03b4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS                      	0x0128 0x03b4 0x0658 1 2
-#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN               	0x0128 0x03b4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK                       	0x0128 0x03b4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09                         	0x0128 0x03b4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04                       	0x0128 0x03b4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA                       	0x0128 0x03b4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05                       	0x012c 0x03b8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS                      	0x012c 0x03b8 0x0658 1 3
-#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS                      	0x012c 0x03b8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT              	0x012c 0x03b8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT                          	0x012c 0x03b8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10                         	0x012c 0x03b8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05                       	0x012c 0x03b8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1                         	0x012c 0x03b8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06                       	0x0130 0x03bc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS                      	0x0130 0x03bc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS                      	0x0130 0x03bc 0x0650 1 2
-#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN               	0x0130 0x03bc 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK                         	0x0130 0x03bc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11                         	0x0130 0x03bc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06                       	0x0130 0x03bc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2                         	0x0130 0x03bc 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07                       	0x0134 0x03c0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS                      	0x0134 0x03c0 0x0650 1 3
-#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS                      	0x0134 0x03c0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT              	0x0134 0x03c0 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK                      	0x0134 0x03c0 0x061c 4 0
-#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12                         	0x0134 0x03c0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07                       	0x0134 0x03c0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3                         	0x0134 0x03c0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08                       	0x0138 0x03c4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA08__SPDIF_IN                           	0x0138 0x03c4 0x0618 1 2
-#define MX6UL_PAD_LCD_DATA08__CSI_DATA16                         	0x0138 0x03c4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA08__EIM_DATA00                         	0x0138 0x03c4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13                         	0x0138 0x03c4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08                       	0x0138 0x03c4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX                        	0x0138 0x03c4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09                       	0x013c 0x03c8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK                          	0x013c 0x03c8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA09__CSI_DATA17                         	0x013c 0x03c8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA09__EIM_DATA01                         	0x013c 0x03c8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14                         	0x013c 0x03c8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09                       	0x013c 0x03c8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX                        	0x013c 0x03c8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10                       	0x0140 0x03cc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC                       	0x0140 0x03cc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA10__CSI_DATA18                         	0x0140 0x03cc 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA10__EIM_DATA02                         	0x0140 0x03cc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15                         	0x0140 0x03cc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10                       	0x0140 0x03cc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX                        	0x0140 0x03cc 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11                       	0x0144 0x03d0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK                       	0x0144 0x03d0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA11__CSI_DATA19                         	0x0144 0x03d0 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA11__EIM_DATA03                         	0x0144 0x03d0 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16                         	0x0144 0x03d0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11                       	0x0144 0x03d0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX                        	0x0144 0x03d0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12                       	0x0148 0x03d4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC                       	0x0148 0x03d4 0x060c 1 1
-#define MX6UL_PAD_LCD_DATA12__CSI_DATA20                         	0x0148 0x03d4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA12__EIM_DATA04                         	0x0148 0x03d4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17                         	0x0148 0x03d4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12                       	0x0148 0x03d4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY                         	0x0148 0x03d4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13                       	0x014c 0x03d8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK                       	0x014c 0x03d8 0x0608 1 1
-#define MX6UL_PAD_LCD_DATA13__CSI_DATA21                         	0x014c 0x03d8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA13__EIM_DATA05                         	0x014c 0x03d8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18                         	0x014c 0x03d8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13                       	0x014c 0x03d8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B                     	0x014c 0x03d8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14                       	0x0150 0x03dc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA                       	0x0150 0x03dc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA14__CSI_DATA22                         	0x0150 0x03dc 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA14__EIM_DATA06                         	0x0150 0x03dc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19                         	0x0150 0x03dc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14                       	0x0150 0x03dc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4                       	0x0150 0x03dc 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15                       	0x0154 0x03e0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA                       	0x0154 0x03e0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA15__CSI_DATA23                         	0x0154 0x03e0 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA15__EIM_DATA07                         	0x0154 0x03e0 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20                         	0x0154 0x03e0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15                       	0x0154 0x03e0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5                       	0x0154 0x03e0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16                       	0x0158 0x03e4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX                           	0x0158 0x03e4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX                           	0x0158 0x03e4 0x0654 1 2
-#define MX6UL_PAD_LCD_DATA16__CSI_DATA01                         	0x0158 0x03e4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA16__EIM_DATA08                         	0x0158 0x03e4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21                         	0x0158 0x03e4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24                       	0x0158 0x03e4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6                       	0x0158 0x03e4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17                       	0x015c 0x03e8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX                           	0x015c 0x03e8 0x0654 1 3
-#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX                           	0x015c 0x03e8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA17__CSI_DATA00                         	0x015c 0x03e8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA17__EIM_DATA09                         	0x015c 0x03e8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22                         	0x015c 0x03e8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25                       	0x015c 0x03e8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7                       	0x015c 0x03e8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18                       	0x0160 0x03ec 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA18__PWM5_OUT                           	0x0160 0x03ec 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO                   	0x0160 0x03ec 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA18__CSI_DATA10                         	0x0160 0x03ec 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA18__EIM_DATA10                         	0x0160 0x03ec 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23                         	0x0160 0x03ec 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26                       	0x0160 0x03ec 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD                         	0x0160 0x03ec 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA19__EIM_DATA11                         	0x0164 0x03f0 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24                         	0x0164 0x03f0 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27                       	0x0164 0x03f0 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK                         	0x0164 0x03f0 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19                       	0x0164 0x03f0 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA19__PWM6_OUT                           	0x0164 0x03f0 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY                     	0x0164 0x03f0 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA19__CSI_DATA11                         	0x0164 0x03f0 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA20__EIM_DATA12                         	0x0168 0x03f4 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25                         	0x0168 0x03f4 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28                       	0x0168 0x03f4 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0                       	0x0168 0x03f4 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20                       	0x0168 0x03f4 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX                           	0x0168 0x03f4 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX                           	0x0168 0x03f4 0x065c 1 2
-#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK                        	0x0168 0x03f4 0x0534 2 0
-#define MX6UL_PAD_LCD_DATA20__CSI_DATA12                         	0x0168 0x03f4 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21                       	0x016c 0x03f8 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX                           	0x016c 0x03f8 0x065c 1 3
-#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX                           	0x016c 0x03f8 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0                         	0x016c 0x03f8 0x0000 2 0
-#define MX6UL_PAD_LCD_DATA21__CSI_DATA13                         	0x016c 0x03f8 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA21__EIM_DATA13                         	0x016c 0x03f8 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26                         	0x016c 0x03f8 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29                       	0x016c 0x03f8 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1                       	0x016c 0x03f8 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22                       	0x0170 0x03fc 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT                          	0x0170 0x03fc 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI                        	0x0170 0x03fc 0x053c 2 0
-#define MX6UL_PAD_LCD_DATA22__CSI_DATA14                         	0x0170 0x03fc 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA22__EIM_DATA14                         	0x0170 0x03fc 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27                         	0x0170 0x03fc 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30                       	0x0170 0x03fc 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2                       	0x0170 0x03fc 0x0000 8 0
-#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23                       	0x0174 0x0400 0x0000 0 0
-#define MX6UL_PAD_LCD_DATA23__MQS_LEFT                           	0x0174 0x0400 0x0000 1 0
-#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO                        	0x0174 0x0400 0x0538 2 0
-#define MX6UL_PAD_LCD_DATA23__CSI_DATA15                         	0x0174 0x0400 0x0000 3 0
-#define MX6UL_PAD_LCD_DATA23__EIM_DATA15                         	0x0174 0x0400 0x0000 4 0
-#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28                         	0x0174 0x0400 0x0000 5 0
-#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31                       	0x0174 0x0400 0x0000 6 0
-#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3                       	0x0174 0x0400 0x0000 8 0
-#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B                        	0x0178 0x0404 0x0000 0 0
-#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK                          	0x0178 0x0404 0x0670 1 2
-#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK                         	0x0178 0x0404 0x0000 2 0
-#define MX6UL_PAD_NAND_RE_B__KPP_ROW00                           	0x0178 0x0404 0x0000 3 0
-#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00                          	0x0178 0x0404 0x0000 4 0
-#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00                          	0x0178 0x0404 0x0000 5 0
-#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2                          	0x0178 0x0404 0x0000 8 0
-#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B                        	0x017c 0x0408 0x0000 0 0
-#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD                          	0x017c 0x0408 0x0678 1 2
-#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B                        	0x017c 0x0408 0x0000 2 0
-#define MX6UL_PAD_NAND_WE_B__KPP_COL00                           	0x017c 0x0408 0x0000 3 0
-#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01                          	0x017c 0x0408 0x0000 4 0
-#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01                          	0x017c 0x0408 0x0000 5 0
-#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3                          	0x017c 0x0408 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00                    	0x0180 0x040c 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0                      	0x0180 0x040c 0x067c 1 2
-#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B                      	0x0180 0x040c 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA00__KPP_ROW01                         	0x0180 0x040c 0x0000 3 0
-#define MX6UL_PAD_NAND_DATA00__EIM_AD08                          	0x0180 0x040c 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02                        	0x0180 0x040c 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY                        	0x0180 0x040c 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01                    	0x0184 0x0410 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1                      	0x0184 0x0410 0x0680 1 2
-#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS                        	0x0184 0x0410 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA01__KPP_COL01                         	0x0184 0x0410 0x0000 3 0
-#define MX6UL_PAD_NAND_DATA01__EIM_AD09                          	0x0184 0x0410 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03                        	0x0184 0x0410 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1                        	0x0184 0x0410 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02                    	0x0188 0x0414 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2                      	0x0188 0x0414 0x0684 1 1
-#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00                     	0x0188 0x0414 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA02__KPP_ROW02                         	0x0188 0x0414 0x0000 3 0
-#define MX6UL_PAD_NAND_DATA02__EIM_AD10                          	0x0188 0x0414 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04                        	0x0188 0x0414 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2                        	0x0188 0x0414 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03                    	0x018c 0x0418 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3                      	0x018c 0x0418 0x0688 1 2
-#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01                     	0x018c 0x0418 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA03__KPP_COL02                         	0x018c 0x0418 0x0000 3 0
-#define MX6UL_PAD_NAND_DATA03__EIM_AD11                          	0x018c 0x0418 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05                        	0x018c 0x0418 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3                        	0x018c 0x0418 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04                    	0x0190 0x041c 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4                      	0x0190 0x041c 0x068c 1 1
-#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02                     	0x0190 0x041c 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK                       	0x0190 0x041c 0x0564 3 1
-#define MX6UL_PAD_NAND_DATA04__EIM_AD12                          	0x0190 0x041c 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06                        	0x0190 0x041c 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX                          	0x0190 0x041c 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX                          	0x0190 0x041c 0x062c 8 2
-#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05                    	0x0194 0x0420 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5                      	0x0194 0x0420 0x0690 1 1
-#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03                     	0x0194 0x0420 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI                       	0x0194 0x0420 0x056c 3 1
-#define MX6UL_PAD_NAND_DATA05__EIM_AD13                          	0x0194 0x0420 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07                        	0x0194 0x0420 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX                          	0x0194 0x0420 0x062c 8 3
-#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX                          	0x0194 0x0420 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06                    	0x0198 0x0424 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6                      	0x0198 0x0424 0x0694 1 1
-#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK                      	0x0198 0x0424 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO                       	0x0198 0x0424 0x0568 3 1
-#define MX6UL_PAD_NAND_DATA06__EIM_AD14                          	0x0198 0x0424 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08                        	0x0198 0x0424 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS                     	0x0198 0x0424 0x0000 8 0
-#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS                     	0x0198 0x0424 0x0628 8 4
-#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07                    	0x019c 0x0428 0x0000 0 0
-#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7                      	0x019c 0x0428 0x0698 1 1
-#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B                      	0x019c 0x0428 0x0000 2 0
-#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0                        	0x019c 0x0428 0x0000 3 0
-#define MX6UL_PAD_NAND_DATA07__EIM_AD15                          	0x019c 0x0428 0x0000 4 0
-#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09                        	0x019c 0x0428 0x0000 5 0
-#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS                     	0x019c 0x0428 0x0628 8 5
-#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS                     	0x019c 0x0428 0x0000 8 0
-#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE                          	0x01a0 0x042c 0x0000 0 0
-#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B                       	0x01a0 0x042c 0x0000 1 0
-#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS                           	0x01a0 0x042c 0x0000 2 0
-#define MX6UL_PAD_NAND_ALE__PWM3_OUT                             	0x01a0 0x042c 0x0000 3 0
-#define MX6UL_PAD_NAND_ALE__EIM_ADDR17                           	0x01a0 0x042c 0x0000 4 0
-#define MX6UL_PAD_NAND_ALE__GPIO4_IO10                           	0x01a0 0x042c 0x0000 5 0
-#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1                           	0x01a0 0x042c 0x0000 8 0
-#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B                        	0x01a4 0x0430 0x0000 0 0
-#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B                      	0x01a4 0x0430 0x0000 1 0
-#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK                         	0x01a4 0x0430 0x0000 2 0
-#define MX6UL_PAD_NAND_WP_B__PWM4_OUT                            	0x01a4 0x0430 0x0000 3 0
-#define MX6UL_PAD_NAND_WP_B__EIM_BCLK                            	0x01a4 0x0430 0x0000 4 0
-#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11                          	0x01a4 0x0430 0x0000 5 0
-#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY                          	0x01a4 0x0430 0x0000 8 0
-#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B                  	0x01a8 0x0434 0x0000 0 0
-#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4                     	0x01a8 0x0434 0x0000 1 0
-#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00                    	0x01a8 0x0434 0x0000 2 0
-#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0                       	0x01a8 0x0434 0x0000 3 0
-#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B                        	0x01a8 0x0434 0x0000 4 0
-#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12                       	0x01a8 0x0434 0x0000 5 0
-#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX                         	0x01a8 0x0434 0x0000 8 0
-#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX                         	0x01a8 0x0434 0x0634 8 2
-#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B                      	0x01ac 0x0438 0x0000 0 0
-#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5                       	0x01ac 0x0438 0x0000 1 0
-#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01                      	0x01ac 0x0438 0x0000 2 0
-#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK                        	0x01ac 0x0438 0x0554 3 1
-#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B                        	0x01ac 0x0438 0x0000 4 0
-#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13                         	0x01ac 0x0438 0x0000 5 0
-#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX                           	0x01ac 0x0438 0x0634 8 3
-#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX                           	0x01ac 0x0438 0x0000 8 0
-#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B                      	0x01b0 0x043c 0x0000 0 0
-#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6                       	0x01b0 0x043c 0x0000 1 0
-#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02                      	0x01b0 0x043c 0x0000 2 0
-#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI                        	0x01b0 0x043c 0x055c 3 1
-#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18                         	0x01b0 0x043c 0x0000 4 0
-#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14                         	0x01b0 0x043c 0x0000 5 0
-#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS                      	0x01b0 0x043c 0x0000 8 0
-#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS                      	0x01b0 0x043c 0x0630 8 2
-#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE                          	0x01b4 0x0440 0x0000 0 0
-#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7                         	0x01b4 0x0440 0x0000 1 0
-#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03                        	0x01b4 0x0440 0x0000 2 0
-#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO                          	0x01b4 0x0440 0x0558 3 1
-#define MX6UL_PAD_NAND_CLE__EIM_ADDR16                           	0x01b4 0x0440 0x0000 4 0
-#define MX6UL_PAD_NAND_CLE__GPIO4_IO15                           	0x01b4 0x0440 0x0000 5 0
-#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS                        	0x01b4 0x0440 0x0630 8 3
-#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS                        	0x01b4 0x0440 0x0000 8 0
-#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS                          	0x01b8 0x0444 0x0000 0 0
-#define MX6UL_PAD_NAND_DQS__CSI_FIELD                            	0x01b8 0x0444 0x0530 1 1
-#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B                         	0x01b8 0x0444 0x0000 2 0
-#define MX6UL_PAD_NAND_DQS__PWM5_OUT                             	0x01b8 0x0444 0x0000 3 0
-#define MX6UL_PAD_NAND_DQS__EIM_WAIT                             	0x01b8 0x0444 0x0000 4 0
-#define MX6UL_PAD_NAND_DQS__GPIO4_IO16                           	0x01b8 0x0444 0x0000 5 0
-#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01                     	0x01b8 0x0444 0x0000 6 0
-#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK                        	0x01b8 0x0444 0x0000 8 0
-#define MX6UL_PAD_SD1_CMD__USDHC1_CMD                            	0x01bc 0x0448 0x0000 0 0
-#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1                         	0x01bc 0x0448 0x0000 1 0
-#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC                          	0x01bc 0x0448 0x0000 2 0
-#define MX6UL_PAD_SD1_CMD__SPDIF_OUT                             	0x01bc 0x0448 0x0000 3 0
-#define MX6UL_PAD_SD1_CMD__EIM_ADDR19                            	0x01bc 0x0448 0x0000 4 0
-#define MX6UL_PAD_SD1_CMD__GPIO2_IO16                            	0x01bc 0x0448 0x0000 5 0
-#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00                      	0x01bc 0x0448 0x0000 6 0
-#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR                          	0x01bc 0x0448 0x0000 8 0
-#define MX6UL_PAD_SD1_CLK__USDHC1_CLK                            	0x01c0 0x044c 0x0000 0 0
-#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2                         	0x01c0 0x044c 0x0000 1 0
-#define MX6UL_PAD_SD1_CLK__SAI2_MCLK                             	0x01c0 0x044c 0x0000 2 0
-#define MX6UL_PAD_SD1_CLK__SPDIF_IN                              	0x01c0 0x044c 0x0618 3 3
-#define MX6UL_PAD_SD1_CLK__EIM_ADDR20                            	0x01c0 0x044c 0x0000 4 0
-#define MX6UL_PAD_SD1_CLK__GPIO2_IO17                            	0x01c0 0x044c 0x0000 5 0
-#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC                           	0x01c0 0x044c 0x0000 8 0
-#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0                        	0x01c4 0x0450 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3                       	0x01c4 0x0450 0x0000 1 0
-#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC                        	0x01c4 0x0450 0x05fc 2 1
-#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX                         	0x01c4 0x0450 0x0000 3 0
-#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21                          	0x01c4 0x0450 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18                          	0x01c4 0x0450 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID                      	0x01c4 0x0450 0x0000 8 0
-#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1                        	0x01c8 0x0454 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA1__GPT2_CLK                            	0x01c8 0x0454 0x05a0 1 1
-#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK                        	0x01c8 0x0454 0x05f8 2 1
-#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX                         	0x01c8 0x0454 0x0584 3 3
-#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22                          	0x01c8 0x0454 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19                          	0x01c8 0x0454 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR                        	0x01c8 0x0454 0x0000 8 0
-#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2                        	0x01cc 0x0458 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1                       	0x01cc 0x0458 0x0598 1 1
-#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA                        	0x01cc 0x0458 0x05f4 2 1
-#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX                         	0x01cc 0x0458 0x0000 3 0
-#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23                          	0x01cc 0x0458 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20                          	0x01cc 0x0458 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1                           	0x01cc 0x0458 0x0000 6 0
-#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC                         	0x01cc 0x0458 0x0000 8 0
-#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3                        	0x01d0 0x045c 0x0000 0 0
-#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2                       	0x01d0 0x045c 0x059c 1 1
-#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA                        	0x01d0 0x045c 0x0000 2 0
-#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX                         	0x01d0 0x045c 0x0588 3 3
-#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24                          	0x01d0 0x045c 0x0000 4 0
-#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21                          	0x01d0 0x045c 0x0000 5 0
-#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2                           	0x01d0 0x045c 0x0000 6 0
-#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID                      	0x01d0 0x045c 0x0000 8 0
-#define MX6UL_PAD_CSI_MCLK__CSI_MCLK                             	0x01d4 0x0460 0x0000 0 0
-#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B                          	0x01d4 0x0460 0x0674 1 0
-#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B                        	0x01d4 0x0460 0x0000 2 0
-#define MX6UL_PAD_CSI_MCLK__I2C1_SDA                             	0x01d4 0x0460 0x05a8 3 0
-#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B                            	0x01d4 0x0460 0x0000 4 0
-#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17                           	0x01d4 0x0460 0x0000 5 0
-#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL                    	0x01d4 0x0460 0x0000 6 0
-#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX                             	0x01d4 0x0460 0x0000 8 0
-#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX                             	0x01d4 0x0460 0x064c 8 0
-#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK                         	0x01d8 0x0464 0x0528 0 1
-#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP                          	0x01d8 0x0464 0x069c 1 2
-#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B                      	0x01d8 0x0464 0x0000 2 0
-#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL                           	0x01d8 0x0464 0x05a4 3 2
-#define MX6UL_PAD_CSI_PIXCLK__EIM_OE                             	0x01d8 0x0464 0x0000 4 0
-#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18                         	0x01d8 0x0464 0x0000 5 0
-#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5                      	0x01d8 0x0464 0x0000 6 0
-#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX                           	0x01d8 0x0464 0x064c 8 3
-#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX                           	0x01d8 0x0464 0x0000 8 0
-#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC                           	0x01dc 0x0468 0x052c 0 0
-#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK                          	0x01dc 0x0468 0x0670 1 0
-#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK                      	0x01dc 0x0468 0x0000 2 0
-#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA                            	0x01dc 0x0468 0x05b0 3 0
-#define MX6UL_PAD_CSI_VSYNC__EIM_RW                              	0x01dc 0x0468 0x0000 4 0
-#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19                          	0x01dc 0x0468 0x0000 5 0
-#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT                            	0x01dc 0x0468 0x0000 6 0
-#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS                       	0x01dc 0x0468 0x0648 8 0
-#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS                       	0x01dc 0x0468 0x0000 8 0
-#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC                           	0x01e0 0x046c 0x0524 0 0
-#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD                          	0x01e0 0x046c 0x0678 1 0
-#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD                       	0x01e0 0x046c 0x0000 2 0
-#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL                            	0x01e0 0x046c 0x05ac 3 0
-#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B                           	0x01e0 0x046c 0x0000 4 0
-#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20                          	0x01e0 0x046c 0x0000 5 0
-#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT                            	0x01e0 0x046c 0x0000 6 0
-#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS                       	0x01e0 0x046c 0x0000 8 0
-#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS                       	0x01e0 0x046c 0x0648 8 1
-#define MX6UL_PAD_CSI_DATA00__CSI_DATA02                         	0x01e4 0x0470 0x04c4 0 0
-#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0                       	0x01e4 0x0470 0x067c 1 0
-#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B                   	0x01e4 0x0470 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK                        	0x01e4 0x0470 0x0544 3 0
-#define MX6UL_PAD_CSI_DATA00__EIM_AD00                           	0x01e4 0x0470 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21                         	0x01e4 0x0470 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT                       	0x01e4 0x0470 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX                           	0x01e4 0x0470 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX                           	0x01e4 0x0470 0x0644 8 0
-#define MX6UL_PAD_CSI_DATA01__CSI_DATA03                         	0x01e8 0x0474 0x04c8 0 0
-#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1                       	0x01e8 0x0474 0x0680 1 0
-#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN                    	0x01e8 0x0474 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0                         	0x01e8 0x0474 0x0000 3 0
-#define MX6UL_PAD_CSI_DATA01__EIM_AD01                           	0x01e8 0x0474 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22                         	0x01e8 0x0474 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK                          	0x01e8 0x0474 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX                           	0x01e8 0x0474 0x0644 8 1
-#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX                           	0x01e8 0x0474 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA02__CSI_DATA04                         	0x01ec 0x0478 0x04d8 0 1
-#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2                       	0x01ec 0x0478 0x0684 1 2
-#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD                    	0x01ec 0x0478 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI                        	0x01ec 0x0478 0x054c 3 1
-#define MX6UL_PAD_CSI_DATA02__EIM_AD02                           	0x01ec 0x0478 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23                         	0x01ec 0x0478 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC                       	0x01ec 0x0478 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS                      	0x01ec 0x0478 0x0640 8 5
-#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS                      	0x01ec 0x0478 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA03__CSI_DATA05                         	0x01f0 0x047c 0x04cc 0 0
-#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3                       	0x01f0 0x047c 0x0688 1 0
-#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD                      	0x01f0 0x047c 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO                        	0x01f0 0x047c 0x0548 3 0
-#define MX6UL_PAD_CSI_DATA03__EIM_AD03                           	0x01f0 0x047c 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24                         	0x01f0 0x047c 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK                       	0x01f0 0x047c 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS                      	0x01f0 0x047c 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS                      	0x01f0 0x047c 0x0640 8 0
-#define MX6UL_PAD_CSI_DATA04__CSI_DATA06                         	0x01f4 0x0480 0x04dc 0 1
-#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4                       	0x01f4 0x0480 0x068c 1 2
-#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK                     	0x01f4 0x0480 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK                        	0x01f4 0x0480 0x0534 3 1
-#define MX6UL_PAD_CSI_DATA04__EIM_AD04                           	0x01f4 0x0480 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25                         	0x01f4 0x0480 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC                       	0x01f4 0x0480 0x05ec 6 1
-#define MX6UL_PAD_CSI_DATA04__USDHC1_WP                          	0x01f4 0x0480 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA05__CSI_DATA07                         	0x01f8 0x0484 0x04e0 0 1
-#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5                       	0x01f8 0x0484 0x0690 1 2
-#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B                   	0x01f8 0x0484 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0                         	0x01f8 0x0484 0x0000 3 0
-#define MX6UL_PAD_CSI_DATA05__EIM_AD05                           	0x01f8 0x0484 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26                         	0x01f8 0x0484 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK                       	0x01f8 0x0484 0x05e8 6 1
-#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B                        	0x01f8 0x0484 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA06__CSI_DATA08                         	0x01fc 0x0488 0x04e4 0 1
-#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6                       	0x01fc 0x0488 0x0694 1 2
-#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN                    	0x01fc 0x0488 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI                        	0x01fc 0x0488 0x053c 3 1
-#define MX6UL_PAD_CSI_DATA06__EIM_AD06                           	0x01fc 0x0488 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27                         	0x01fc 0x0488 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA                       	0x01fc 0x0488 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B                     	0x01fc 0x0488 0x0000 8 0
-#define MX6UL_PAD_CSI_DATA07__CSI_DATA09                         	0x0200 0x048c 0x04e8 0 1
-#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7                       	0x0200 0x048c 0x0698 1 2
-#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD                    	0x0200 0x048c 0x0000 2 0
-#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO                        	0x0200 0x048c 0x0538 3 1
-#define MX6UL_PAD_CSI_DATA07__EIM_AD07                           	0x0200 0x048c 0x0000 4 0
-#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28                         	0x0200 0x048c 0x0000 5 0
-#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA                       	0x0200 0x048c 0x0000 6 0
-#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT                     	0x0200 0x048c 0x0000 8 0
+#define MX6UL_PAD_JTAG_MOD__SJC_MOD			0x0044 0x02d0 0x0000 0 0
+#define MX6UL_PAD_JTAG_MOD__GPT2_CLK			0x0044 0x02d0 0x05a0 1 0
+#define MX6UL_PAD_JTAG_MOD__SPDIF_OUT			0x0044 0x02d0 0x0000 2 0
+#define MX6UL_PAD_JTAG_MOD__ENET1_REF_CLK_25M		0x0044 0x02d0 0x0000 3 0
+#define MX6UL_PAD_JTAG_MOD__CCM_PMIC_RDY		0x0044 0x02d0 0x04c0 4 0
+#define MX6UL_PAD_JTAG_MOD__GPIO1_IO10			0x0044 0x02d0 0x0000 5 0
+#define MX6UL_PAD_JTAG_MOD__SDMA_EXT_EVENT00		0x0044 0x02d0 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__SJC_TMS			0x0048 0x02d4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TMS__GPT2_CAPTURE1		0x0048 0x02d4 0x0598 1 0
+#define MX6UL_PAD_JTAG_TMS__SAI2_MCLK			0x0048 0x02d4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TMS__CCM_CLKO1			0x0048 0x02d4 0x0000 3 0
+#define MX6UL_PAD_JTAG_TMS__CCM_WAIT			0x0048 0x02d4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TMS__GPIO1_IO11			0x0048 0x02d4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TMS__SDMA_EXT_EVENT01		0x0048 0x02d4 0x0000 6 0
+#define MX6UL_PAD_JTAG_TMS__EPIT1_OUT			0x0048 0x02d4 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDO__SJC_TDO			0x004c 0x02d8 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDO__GPT2_CAPTURE2		0x004c 0x02d8 0x059c 1 0
+#define MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC		0x004c 0x02d8 0x05fc 2 0
+#define MX6UL_PAD_JTAG_TDO__CCM_CLKO2			0x004c 0x02d8 0x0000 3 0
+#define MX6UL_PAD_JTAG_TDO__CCM_STOP			0x004c 0x02d8 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDO__GPIO1_IO12			0x004c 0x02d8 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDO__MQS_RIGHT			0x004c 0x02d8 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDO__EPIT2_OUT			0x004c 0x02d8 0x0000 8 0
+#define MX6UL_PAD_JTAG_TDI__SJC_TDI			0x0050 0x02dc 0x0000 0 0
+#define MX6UL_PAD_JTAG_TDI__GPT2_COMPARE1		0x0050 0x02dc 0x0000 1 0
+#define MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK		0x0050 0x02dc 0x05f8 2 0
+#define MX6UL_PAD_JTAG_TDI__PWM6_OUT			0x0050 0x02dc 0x0000 4 0
+#define MX6UL_PAD_JTAG_TDI__GPIO1_IO13			0x0050 0x02dc 0x0000 5 0
+#define MX6UL_PAD_JTAG_TDI__MQS_LEFT			0x0050 0x02dc 0x0000 6 0
+#define MX6UL_PAD_JTAG_TDI__SIM1_POWER_FAIL		0x0050 0x02dc 0x0000 8 0
+#define MX6UL_PAD_JTAG_TCK__SJC_TCK			0x0054 0x02e0 0x0000 0 0
+#define MX6UL_PAD_JTAG_TCK__GPT2_COMPARE2		0x0054 0x02e0 0x0000 1 0
+#define MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA		0x0054 0x02e0 0x05f4 2 0
+#define MX6UL_PAD_JTAG_TCK__PWM7_OUT			0x0054 0x02e0 0x0000 4 0
+#define MX6UL_PAD_JTAG_TCK__GPIO1_IO14			0x0054 0x02e0 0x0000 5 0
+#define MX6UL_PAD_JTAG_TCK__SIM2_POWER_FAIL		0x0054 0x02e0 0x0000 8 0
+#define MX6UL_PAD_JTAG_TRST_B__SJC_TRSTB		0x0058 0x02e4 0x0000 0 0
+#define MX6UL_PAD_JTAG_TRST_B__GPT2_COMPARE3		0x0058 0x02e4 0x0000 1 0
+#define MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA		0x0058 0x02e4 0x0000 2 0
+#define MX6UL_PAD_JTAG_TRST_B__PWM8_OUT			0x0058 0x02e4 0x0000 4 0
+#define MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15		0x0058 0x02e4 0x0000 5 0
+#define MX6UL_PAD_JTAG_TRST_B__CAAM_RNG_OSC_OBS		0x0058 0x02e4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO00__I2C2_SCL			0x005c 0x02e8 0x05ac 0 1
+#define MX6UL_PAD_GPIO1_IO00__GPT1_CAPTURE1		0x005c 0x02e8 0x058c 1 0
+#define MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID		0x005c 0x02e8 0x04b8 2 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_REF_CLK1		0x005c 0x02e8 0x0574 3 0
+#define MX6UL_PAD_GPIO1_IO00__MQS_RIGHT			0x005c 0x02e8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO00__GPIO1_IO00		0x005c 0x02e8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO00__ENET1_1588_EVENT0_IN	0x005c 0x02e8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO00__SRC_SYSTEM_RESET		0x005c 0x02e8 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO00__WDOG3_WDOG_B		0x005c 0x02e8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO01__I2C2_SDA			0x0060 0x02ec 0x05b0 0 1
+#define MX6UL_PAD_GPIO1_IO01__GPT1_COMPARE1		0x0060 0x02ec 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC		0x0060 0x02ec 0x0664 2 0
+#define MX6UL_PAD_GPIO1_IO01__ENET2_REF_CLK2		0x0060 0x02ec 0x057c 3 0
+#define MX6UL_PAD_GPIO1_IO01__MQS_LEFT			0x0060 0x02ec 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0x0060 0x02ec 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO01__ENET1_1588_EVENT0_OUT	0x0060 0x02ec 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO01__SRC_EARLY_RESET		0x0060 0x02ec 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO01__WDOG1_WDOG_B		0x0060 0x02ec 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__I2C1_SCL			0x0064 0x02f0 0x05a4 0 0
+#define MX6UL_PAD_GPIO1_IO02__GPT1_COMPARE2		0x0064 0x02f0 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO02__USB_OTG2_PWR		0x0064 0x02f0 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO02__ENET1_REF_CLK_25M		0x0064 0x02f0 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO02__USDHC1_WP			0x0064 0x02f0 0x066c 4 0
+#define MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0x0064 0x02f0 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO02__SDMA_EXT_EVENT00		0x0064 0x02f0 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO02__SRC_ANY_PU_RESET		0x0064 0x02f0 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DCE_TX		0x0064 0x02f0 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO02__UART1_DTE_RX		0x0064 0x02f0 0x0624 8 0
+#define MX6UL_PAD_GPIO1_IO03__I2C1_SDA			0x0068 0x02f4 0x05a8 0 1
+#define MX6UL_PAD_GPIO1_IO03__GPT1_COMPARE3		0x0068 0x02f4 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO03__USB_OTG2_OC		0x0068 0x02f4 0x0660 2 0
+#define MX6UL_PAD_GPIO1_IO03__USDHC1_CD_B		0x0068 0x02f4 0x0668 4 0
+#define MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0x0068 0x02f4 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO03__CCM_DI0_eXT_CLK		0x0068 0x02f4 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO03__SRC_TESTER_ACK		0x0068 0x02f4 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DTE_TX		0x0068 0x02f4 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO03__UART1_DCE_RX		0x0068 0x02f4 0x0624 8 1
+#define MX6UL_PAD_GPIO1_IO04__ENET1_REF_CLK1		0x006c 0x02f8 0x0574 0 1
+#define MX6UL_PAD_GPIO1_IO04__PWM3_OUT			0x006c 0x02f8 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR		0x006c 0x02f8 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO04__USDHC1_RESET_B		0x006c 0x02f8 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0x006c 0x02f8 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO04__ENET2_1588_EVENT0_IN	0x006c 0x02f8 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX		0x006c 0x02f8 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX		0x006c 0x02f8 0x0644 8 2
+#define MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2		0x0070 0x02fc 0x057c 0 1
+#define MX6UL_PAD_GPIO1_IO05__PWM4_OUT			0x0070 0x02fc 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO05__ANATOP_OTG2_ID		0x0070 0x02fc 0x04bc 2 0
+#define MX6UL_PAD_GPIO1_IO05__CSI_FIELD			0x0070 0x02fc 0x0530 3 0
+#define MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT		0x0070 0x02fc 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO05__GPIO1_IO05		0x0070 0x02fc 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO05__ENET2_1588_EVENT0_OUT	0x0070 0x02fc 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX		0x0070 0x02fc 0x0644 8 3
+#define MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX		0x0070 0x02fc 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__ENET1_MDIO		0x0074 0x0300 0x0578 0 0
+#define MX6UL_PAD_GPIO1_IO06__ENET2_MDIO		0x0074 0x0300 0x0580 1 0
+#define MX6UL_PAD_GPIO1_IO06__USB_OTG_PWR_WAKE		0x0074 0x0300 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO06__CSI_MCLK			0x0074 0x0300 0x0000 3 0
+#define MX6UL_PAD_GPIO1_IO06__USDHC2_WP			0x0074 0x0300 0x069c 4 0
+#define MX6UL_PAD_GPIO1_IO06__GPIO1_IO06		0x0074 0x0300 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_WAIT			0x0074 0x0300 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO06__CCM_REF_EN_B		0x0074 0x0300 0x0000 7 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DCE_CTS		0x0074 0x0300 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO06__UART1_DTE_RTS		0x0074 0x0300 0x0620 8 0
+#define MX6UL_PAD_GPIO1_IO07__ENET1_MDC			0x0078 0x0304 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO07__ENET2_MDC			0x0078 0x0304 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO07__USB_OTG_HOST_MODE		0x0078 0x0304 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO07__CSI_PIXCLK		0x0078 0x0304 0x0528 3 0
+#define MX6UL_PAD_GPIO1_IO07__USDHC2_CD_B		0x0078 0x0304 0x0674 4 1
+#define MX6UL_PAD_GPIO1_IO07__GPIO1_IO07		0x0078 0x0304 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO07__CCM_STOP			0x0078 0x0304 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO07__UART1_DCE_RTS		0x0078 0x0304 0x0620 8 1
+#define MX6UL_PAD_GPIO1_IO07__UART1_DTE_CTS		0x0078 0x0304 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO08__PWM1_OUT			0x007c 0x0308 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B		0x007c 0x0308 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO08__SPDIF_OUT			0x007c 0x0308 0x0000 2 0
+#define MX6UL_PAD_GPIO1_IO08__CSI_VSYNC			0x007c 0x0308 0x052c 3 1
+#define MX6UL_PAD_GPIO1_IO08__USDHC2_VSELECT		0x007c 0x0308 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO08__GPIO1_IO08		0x007c 0x0308 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO08__CCM_PMIC_RDY		0x007c 0x0308 0x04c0 6 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS		0x007c 0x0308 0x0640 8 1
+#define MX6UL_PAD_GPIO1_IO08__UART5_DTE_CTS		0x007c 0x0308 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__PWM2_OUT			0x0080 0x030c 0x0000 0 0
+#define MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY		0x0080 0x030c 0x0000 1 0
+#define MX6UL_PAD_GPIO1_IO09__SPDIF_IN			0x0080 0x030c 0x0618 2 0
+#define MX6UL_PAD_GPIO1_IO09__CSI_HSYNC			0x0080 0x030c 0x0524 3 1
+#define MX6UL_PAD_GPIO1_IO09__USDHC2_RESET_B		0x0080 0x030c 0x0000 4 0
+#define MX6UL_PAD_GPIO1_IO09__GPIO1_IO09		0x0080 0x030c 0x0000 5 0
+#define MX6UL_PAD_GPIO1_IO09__USDHC1_RESET_B		0x0080 0x030c 0x0000 6 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS		0x0080 0x030c 0x0000 8 0
+#define MX6UL_PAD_GPIO1_IO09__UART5_DTE_RTS		0x0080 0x030c 0x0640 8 2
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX		0x0084 0x0310 0x0000 0 0
+#define MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX		0x0084 0x0310 0x0624 0 2
+#define MX6UL_PAD_UART1_TX_DATA__ENET1_RDATA02		0x0084 0x0310 0x0000 1 0
+#define MX6UL_PAD_UART1_TX_DATA__I2C3_SCL		0x0084 0x0310 0x05b4 2 0
+#define MX6UL_PAD_UART1_TX_DATA__CSI_DATA02		0x0084 0x0310 0x04c4 3 1
+#define MX6UL_PAD_UART1_TX_DATA__GPT1_COMPARE1		0x0084 0x0310 0x0000 4 0
+#define MX6UL_PAD_UART1_TX_DATA__GPIO1_IO16		0x0084 0x0310 0x0000 5 0
+#define MX6UL_PAD_UART1_TX_DATA__SPDIF_OUT		0x0084 0x0310 0x0000 8 0
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX		0x0088 0x0314 0x0624 0 3
+#define MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX		0x0088 0x0314 0x0000 0 0
+#define MX6UL_PAD_UART1_RX_DATA__ENET1_RDATA03		0x0088 0x0314 0x0000 1 0
+#define MX6UL_PAD_UART1_RX_DATA__I2C3_SDA		0x0088 0x0314 0x05b8 2 0
+#define MX6UL_PAD_UART1_RX_DATA__CSI_DATA03		0x0088 0x0314 0x04c8 3 1
+#define MX6UL_PAD_UART1_RX_DATA__GPT1_CLK		0x0088 0x0314 0x0594 4 0
+#define MX6UL_PAD_UART1_RX_DATA__GPIO1_IO17		0x0088 0x0314 0x0000 5 0
+#define MX6UL_PAD_UART1_RX_DATA__SPDIF_IN		0x0088 0x0314 0x0618 8 1
+#define MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS		0x008c 0x0318 0x0000 0 0
+#define MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS		0x008c 0x0318 0x0620 0 2
+#define MX6UL_PAD_UART1_CTS_B__ENET1_RX_CLK		0x008c 0x0318 0x0000 1 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC1_WP		0x008c 0x0318 0x066c 2 1
+#define MX6UL_PAD_UART1_CTS_B__CSI_DATA04		0x008c 0x0318 0x04d8 3 0
+#define MX6UL_PAD_UART1_CTS_B__ENET2_1588_EVENT1_IN	0x008c 0x0318 0x0000 4 0
+#define MX6UL_PAD_UART1_CTS_B__GPIO1_IO18		0x008c 0x0318 0x0000 5 0
+#define MX6UL_PAD_UART1_CTS_B__USDHC2_WP		0x008c 0x0318 0x069c 8 1
+#define MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS		0x0090 0x031c 0x0620 0 3
+#define MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS		0x0090 0x031c 0x0000 0 0
+#define MX6UL_PAD_UART1_RTS_B__ENET1_TX_ER		0x0090 0x031c 0x0000 1 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B		0x0090 0x031c 0x0668 2 1
+#define MX6UL_PAD_UART1_RTS_B__CSI_DATA05		0x0090 0x031c 0x04cc 3 1
+#define MX6UL_PAD_UART1_RTS_B__ENET2_1588_EVENT1_OUT	0x0090 0x031c 0x0000 4 0
+#define MX6UL_PAD_UART1_RTS_B__GPIO1_IO19		0x0090 0x031c 0x0000 5 0
+#define MX6UL_PAD_UART1_RTS_B__USDHC2_CD_B		0x0090 0x031c 0x0674 8 2
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX		0x0094 0x0320 0x0000 0 0
+#define MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX		0x0094 0x0320 0x062c 0 0
+#define MX6UL_PAD_UART2_TX_DATA__ENET1_TDATA02		0x0094 0x0320 0x0000 1 0
+#define MX6UL_PAD_UART2_TX_DATA__I2C4_SCL		0x0094 0x0320 0x05bc 2 0
+#define MX6UL_PAD_UART2_TX_DATA__CSI_DATA06		0x0094 0x0320 0x04dc 3 0
+#define MX6UL_PAD_UART2_TX_DATA__GPT1_CAPTURE1		0x0094 0x0320 0x058c 4 1
+#define MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20		0x0094 0x0320 0x0000 5 0
+#define MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0		0x0094 0x0320 0x0000 8 0
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX		0x0098 0x0324 0x062c 0 1
+#define MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX		0x0098 0x0324 0x0000 0 0
+#define MX6UL_PAD_UART2_RX_DATA__ENET1_TDATA03		0x0098 0x0324 0x0000 1 0
+#define MX6UL_PAD_UART2_RX_DATA__I2C4_SDA		0x0098 0x0324 0x05c0 2 0
+#define MX6UL_PAD_UART2_RX_DATA__CSI_DATA07		0x0098 0x0324 0x04e0 3 0
+#define MX6UL_PAD_UART2_RX_DATA__GPT1_CAPTURE2		0x0098 0x0324 0x0590 4 0
+#define MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21		0x0098 0x0324 0x0000 5 0
+#define MX6UL_PAD_UART2_RX_DATA__SJC_DONE		0x0098 0x0324 0x0000 7 0
+#define MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK		0x0098 0x0324 0x0554 8 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS		0x009c 0x0328 0x0000 0 0
+#define MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS		0x009c 0x0328 0x0628 0 0
+#define MX6UL_PAD_UART2_CTS_B__ENET1_CRS		0x009c 0x0328 0x0000 1 0
+#define MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX		0x009c 0x0328 0x0000 2 0
+#define MX6UL_PAD_UART2_CTS_B__CSI_DATA08		0x009c 0x0328 0x04e4 3 0
+#define MX6UL_PAD_UART2_CTS_B__GPT1_COMPARE2		0x009c 0x0328 0x0000 4 0
+#define MX6UL_PAD_UART2_CTS_B__GPIO1_IO22		0x009c 0x0328 0x0000 5 0
+#define MX6UL_PAD_UART2_CTS_B__SJC_DE_B			0x009c 0x0328 0x0000 7 0
+#define MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI		0x009c 0x0328 0x055c 8 0
+#define MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS		0x00a0 0x032c 0x0628 0 1
+#define MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS		0x00a0 0x032c 0x0000 0 0
+#define MX6UL_PAD_UART2_RTS_B__ENET1_COL		0x00a0 0x032c 0x0000 1 0
+#define MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX		0x00a0 0x032c 0x0588 2 0
+#define MX6UL_PAD_UART2_RTS_B__CSI_DATA09		0x00a0 0x032c 0x04e8 3 0
+#define MX6UL_PAD_UART2_RTS_B__GPT1_COMPARE3		0x00a0 0x032c 0x0000 4 0
+#define MX6UL_PAD_UART2_RTS_B__GPIO1_IO23		0x00a0 0x032c 0x0000 5 0
+#define MX6UL_PAD_UART2_RTS_B__SJC_FAIL			0x00a0 0x032c 0x0000 7 0
+#define MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO		0x00a0 0x032c 0x0558 8 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX		0x00a4 0x0330 0x0000 0 0
+#define MX6UL_PAD_UART3_TX_DATA__UART3_DTE_RX		0x00a4 0x0330 0x0634 0 0
+#define MX6UL_PAD_UART3_TX_DATA__ENET2_RDATA02		0x00a4 0x0330 0x0000 1 0
+#define MX6UL_PAD_UART3_TX_DATA__SIM1_PORT0_PD		0x00a4 0x0330 0x0000 2 0
+#define MX6UL_PAD_UART3_TX_DATA__CSI_DATA01		0x00a4 0x0330 0x0000 3 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS		0x00a4 0x0330 0x0000 4 0
+#define MX6UL_PAD_UART3_TX_DATA__UART2_DTE_RTS		0x00a4 0x0330 0x0628 4 2
+#define MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24		0x00a4 0x0330 0x0000 5 0
+#define MX6UL_PAD_UART3_TX_DATA__SJC_JTAG_ACT		0x00a4 0x0330 0x0000 7 0
+#define MX6UL_PAD_UART3_TX_DATA__ANATOP_OTG1_ID		0x00a4 0x0330 0x04b8 8 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX		0x00a8 0x0334 0x0634 0 1
+#define MX6UL_PAD_UART3_RX_DATA__UART3_DTE_TX		0x00a8 0x0334 0x0000 0 0
+#define MX6UL_PAD_UART3_RX_DATA__ENET2_RDATA03		0x00a8 0x0334 0x0000 1 0
+#define MX6UL_PAD_UART3_RX_DATA__SIM2_PORT0_PD		0x00a8 0x0334 0x0000 2 0
+#define MX6UL_PAD_UART3_RX_DATA__CSI_DATA00		0x00a8 0x0334 0x0000 3 0
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS		0x00a8 0x0334 0x0628 4 3
+#define MX6UL_PAD_UART3_RX_DATA__UART2_DTE_CTS		0x00a8 0x0334 0x0000 4 0
+#define MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25		0x00a8 0x0334 0x0000 5 0
+#define MX6UL_PAD_UART3_RX_DATA__EPIT1_OUT		0x00a8 0x0334 0x0000 8 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS		0x00ac 0x0338 0x0000 0 0
+#define MX6UL_PAD_UART3_CTS_B__UART3_DTE_RTS		0x00ac 0x0338 0x0630 0 0
+#define MX6UL_PAD_UART3_CTS_B__ENET2_RX_CLK		0x00ac 0x0338 0x0000 1 0
+#define MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX		0x00ac 0x0338 0x0000 2 0
+#define MX6UL_PAD_UART3_CTS_B__CSI_DATA10		0x00ac 0x0338 0x0000 3 0
+#define MX6UL_PAD_UART3_CTS_B__ENET1_1588_EVENT1_IN	0x00ac 0x0338 0x0000 4 0
+#define MX6UL_PAD_UART3_CTS_B__GPIO1_IO26		0x00ac 0x0338 0x0000 5 0
+#define MX6UL_PAD_UART3_CTS_B__EPIT2_OUT		0x00ac 0x0338 0x0000 8 0
+#define MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS		0x00b0 0x033c 0x0630 0 1
+#define MX6UL_PAD_UART3_RTS_B__UART3_DTE_CTS		0x00b0 0x033c 0x0000 0 0
+#define MX6UL_PAD_UART3_RTS_B__ENET2_TX_ER		0x00b0 0x033c 0x0000 1 0
+#define MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX		0x00b0 0x033c 0x0584 2 0
+#define MX6UL_PAD_UART3_RTS_B__CSI_DATA11		0x00b0 0x033c 0x0000 3 0
+#define MX6UL_PAD_UART3_RTS_B__ENET1_1588_EVENT1_OUT	0x00b0 0x033c 0x0000 4 0
+#define MX6UL_PAD_UART3_RTS_B__GPIO1_IO27		0x00b0 0x033c 0x0000 5 0
+#define MX6UL_PAD_UART3_RTS_B__WDOG1_WDOG_B		0x00b0 0x033c 0x0000 8 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX		0x00b4 0x0340 0x0000 0 0
+#define MX6UL_PAD_UART4_TX_DATA__UART4_DTE_RX		0x00b4 0x0340 0x063c 0 0
+#define MX6UL_PAD_UART4_TX_DATA__ENET2_TDATA02		0x00b4 0x0340 0x0000 1 0
+#define MX6UL_PAD_UART4_TX_DATA__I2C1_SCL		0x00b4 0x0340 0x05a4 2 1
+#define MX6UL_PAD_UART4_TX_DATA__CSI_DATA12		0x00b4 0x0340 0x0000 3 0
+#define MX6UL_PAD_UART4_TX_DATA__CSU_CSU_ALARM_AUT02	0x00b4 0x0340 0x0000 4 0
+#define MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28		0x00b4 0x0340 0x0000 5 0
+#define MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK		0x00b4 0x0340 0x0544 8 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX		0x00b8 0x0344 0x063c 0 1
+#define MX6UL_PAD_UART4_RX_DATA__UART4_DTE_TX		0x00b8 0x0344 0x0000 0 0
+#define MX6UL_PAD_UART4_RX_DATA__ENET2_TDATA03		0x00b8 0x0344 0x0000 1 0
+#define MX6UL_PAD_UART4_RX_DATA__I2C1_SDA		0x00b8 0x0344 0x05a8 2 2
+#define MX6UL_PAD_UART4_RX_DATA__CSI_DATA13		0x00b8 0x0344 0x0000 3 0
+#define MX6UL_PAD_UART4_RX_DATA__CSU_CSU_ALARM_AUT01	0x00b8 0x0344 0x0000 4 0
+#define MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29		0x00b8 0x0344 0x0000 5 0
+#define MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0		0x00b8 0x0344 0x0000 8 0
+#define MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30		0x00bc 0x0348 0x0000 5 0
+#define MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI		0x00bc 0x0348 0x054c 8 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX		0x00bc 0x0348 0x0000 0 0
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX		0x00bc 0x0348 0x0644 0 4
+#define MX6UL_PAD_UART5_TX_DATA__ENET2_CRS		0x00bc 0x0348 0x0000 1 0
+#define MX6UL_PAD_UART5_TX_DATA__I2C2_SCL		0x00bc 0x0348 0x05ac 2 2
+#define MX6UL_PAD_UART5_TX_DATA__CSI_DATA14		0x00bc 0x0348 0x0000 3 0
+#define MX6UL_PAD_UART5_TX_DATA__CSU_CSU_ALARM_AUT00	0x00bc 0x0348 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX		0x00c0 0x034c 0x0644 0 5
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DTE_TX		0x00c0 0x034c 0x0000 0 0
+#define MX6UL_PAD_UART5_RX_DATA__ENET2_COL		0x00c0 0x034c 0x0000 1 0
+#define MX6UL_PAD_UART5_RX_DATA__I2C2_SDA		0x00c0 0x034c 0x05b0 2 2
+#define MX6UL_PAD_UART5_RX_DATA__CSI_DATA15		0x00c0 0x034c 0x0000 3 0
+#define MX6UL_PAD_UART5_RX_DATA__CSU_CSU_INT_DEB	0x00c0 0x034c 0x0000 4 0
+#define MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31		0x00c0 0x034c 0x0000 5 0
+#define MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO		0x00c0 0x034c 0x0548 8 1
+#define MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00		0x00c4 0x0350 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DCE_RTS		0x00c4 0x0350 0x0638 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__UART4_DTE_CTS		0x00c4 0x0350 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA0__PWM1_OUT		0x00c4 0x0350 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA0__CSI_DATA16		0x00c4 0x0350 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX		0x00c4 0x0350 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00		0x00c4 0x0350 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA0__KPP_ROW00		0x00c4 0x0350 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA0__USDHC1_LCTL		0x00c4 0x0350 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01		0x00c8 0x0354 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DCE_CTS		0x00c8 0x0354 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_DATA1__UART4_DTE_RTS		0x00c8 0x0354 0x0638 1 1
+#define MX6UL_PAD_ENET1_RX_DATA1__PWM2_OUT		0x00c8 0x0354 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_DATA1__CSI_DATA17		0x00c8 0x0354 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX		0x00c8 0x0354 0x0584 4 1
+#define MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01		0x00c8 0x0354 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_DATA1__KPP_COL00		0x00c8 0x0354 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_DATA1__USDHC2_LCTL		0x00c8 0x0354 0x0000 8 0
+#define MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN		0x00cc 0x0358 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS		0x00cc 0x0358 0x0640 1 3
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DTE_CTS		0x00cc 0x0358 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_EN__CSI_DATA18		0x00cc 0x0358 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX		0x00cc 0x0358 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02		0x00cc 0x0358 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_EN__KPP_ROW01		0x00cc 0x0358 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_EN__USDHC1_VSELECT		0x00cc 0x0358 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00		0x00d0 0x035c 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DCE_CTS		0x00d0 0x035c 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS		0x00d0 0x035c 0x0640 1 4
+#define MX6UL_PAD_ENET1_TX_DATA0__CSI_DATA19		0x00d0 0x035c 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX		0x00d0 0x035c 0x0588 4 1
+#define MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03		0x00d0 0x035c 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA0__KPP_COL01		0x00d0 0x035c 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA0__USDHC2_VSELECT	0x00d0 0x035c 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01		0x00d4 0x0360 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DCE_CTS		0x00d4 0x0360 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_DATA1__UART6_DTE_RTS		0x00d4 0x0360 0x0648 1 2
+#define MX6UL_PAD_ENET1_TX_DATA1__PWM5_OUT		0x00d4 0x0360 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_DATA1__CSI_DATA20		0x00d4 0x0360 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_DATA1__ENET2_MDIO		0x00d4 0x0360 0x0580 4 1
+#define MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04		0x00d4 0x0360 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_DATA1__KPP_ROW02		0x00d4 0x0360 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_DATA1__WDOG1_WDOG_RST_B_DEB	0x00d4 0x0360 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN		0x00d8 0x0364 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DCE_RTS		0x00d8 0x0364 0x0648 1 3
+#define MX6UL_PAD_ENET1_TX_EN__UART6_DTE_CTS		0x00d8 0x0364 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_EN__PWM6_OUT			0x00d8 0x0364 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_EN__CSI_DATA21		0x00d8 0x0364 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_EN__ENET2_MDC		0x00d8 0x0364 0x0000 4 0
+#define MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05		0x00d8 0x0364 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_EN__KPP_COL02		0x00d8 0x0364 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_EN__WDOG2_WDOG_RST_B_DEB	0x00d8 0x0364 0x0000 8 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_TX_CLK		0x00dc 0x0368 0x0000 0 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DCE_CTS		0x00dc 0x0368 0x0000 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__UART7_DTE_RTS		0x00dc 0x0368 0x0650 1 0
+#define MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT		0x00dc 0x0368 0x0000 2 0
+#define MX6UL_PAD_ENET1_TX_CLK__CSI_DATA22		0x00dc 0x0368 0x0000 3 0
+#define MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1		0x00dc 0x0368 0x0574 4 2
+#define MX6UL_PAD_ENET1_TX_CLK__GPIO2_IO06		0x00dc 0x0368 0x0000 5 0
+#define MX6UL_PAD_ENET1_TX_CLK__KPP_ROW03		0x00dc 0x0368 0x0000 6 0
+#define MX6UL_PAD_ENET1_TX_CLK__GPT1_CLK		0x00dc 0x0368 0x0594 8 1
+#define MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER		0x00e0 0x036c 0x0000 0 0
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DCE_RTS		0x00e0 0x036c 0x0650 1 1
+#define MX6UL_PAD_ENET1_RX_ER__UART7_DTE_CTS		0x00e0 0x036c 0x0000 1 0
+#define MX6UL_PAD_ENET1_RX_ER__PWM8_OUT			0x00e0 0x036c 0x0000 2 0
+#define MX6UL_PAD_ENET1_RX_ER__CSI_DATA23		0x00e0 0x036c 0x0000 3 0
+#define MX6UL_PAD_ENET1_RX_ER__EIM_CRE			0x00e0 0x036c 0x0000 4 0
+#define MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07		0x00e0 0x036c 0x0000 5 0
+#define MX6UL_PAD_ENET1_RX_ER__KPP_COL03		0x00e0 0x036c 0x0000 6 0
+#define MX6UL_PAD_ENET1_RX_ER__GPT1_CAPTURE2		0x00e0 0x036c 0x0590 8 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00		0x00e4 0x0370 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DCE_TX		0x00e4 0x0370 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA0__UART6_DTE_RX		0x00e4 0x0370 0x064c 1 1
+#define MX6UL_PAD_ENET2_RX_DATA0__SIM1_PORT0_TRXD	0x00e4 0x0370 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA0__I2C3_SCL		0x00e4 0x0370 0x05b4 3 1
+#define MX6UL_PAD_ENET2_RX_DATA0__ENET1_MDIO		0x00e4 0x0370 0x0578 4 1
+#define MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08		0x00e4 0x0370 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04		0x00e4 0x0370 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA0__USB_OTG1_PWR		0x00e4 0x0370 0x0000 8 0
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01		0x00e8 0x0374 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DCE_RX		0x00e8 0x0374 0x064c 1 2
+#define MX6UL_PAD_ENET2_RX_DATA1__UART6_DTE_TX		0x00e8 0x0374 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_DATA1__SIM1_PORT0_cLK	0x00e8 0x0374 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_DATA1__I2C3_SDA		0x00e8 0x0374 0x05b8 3 1
+#define MX6UL_PAD_ENET2_RX_DATA1__ENET1_MDC		0x00e8 0x0374 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09		0x00e8 0x0374 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04		0x00e8 0x0374 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_DATA1__USB_OTG1_OC		0x00e8 0x0374 0x0664 8 1
+#define MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN		0x00ec 0x0378 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DCE_TX		0x00ec 0x0378 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_EN__UART7_DTE_RX		0x00ec 0x0378 0x0654 1 0
+#define MX6UL_PAD_ENET2_RX_EN__SIM1_PORT0_RST_B		0x00ec 0x0378 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_EN__I2C4_SCL			0x00ec 0x0378 0x05bc 3 1
+#define MX6UL_PAD_ENET2_RX_EN__EIM_ADDR26		0x00ec 0x0378 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10		0x00ec 0x0378 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_EN__KPP_ROW05		0x00ec 0x0378 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_EN__ENET1_REF_CLK_25M	0x00ec 0x0378 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00		0x00f0 0x037c 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DCE_RX		0x00f0 0x037c 0x0654 1 1
+#define MX6UL_PAD_ENET2_TX_DATA0__UART7_DTE_TX		0x00f0 0x037c 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA0__SIM1_PORT0_SVEN	0x00f0 0x037c 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA0__I2C4_SDA		0x00f0 0x037c 0x05c0 3 1
+#define MX6UL_PAD_ENET2_TX_DATA0__EIM_EB_B02		0x00f0 0x037c 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11		0x00f0 0x037c 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05		0x00f0 0x037c 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01		0x00f4 0x0380 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX		0x00f4 0x0380 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__UART8_DTE_RX		0x00f4 0x0380 0x065c 1 0
+#define MX6UL_PAD_ENET2_TX_DATA1__SIM2_PORT0_TRXD	0x00f4 0x0380 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_DATA1__ECSPI4_SCLK		0x00f4 0x0380 0x0564 3 0
+#define MX6UL_PAD_ENET2_TX_DATA1__EIM_EB_B03		0x00f4 0x0380 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12		0x00f4 0x0380 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06		0x00f4 0x0380 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_DATA1__USB_OTG2_PWR		0x00f4 0x0380 0x0000 8 0
+#define MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN		0x00f8 0x0384 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX		0x00f8 0x0384 0x065c 1 1
+#define MX6UL_PAD_ENET2_TX_EN__UART8_DTE_TX		0x00f8 0x0384 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_EN__SIM2_PORT0_cLK		0x00f8 0x0384 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_EN__ECSPI4_MOSI		0x00f8 0x0384 0x056c 3 0
+#define MX6UL_PAD_ENET2_TX_EN__EIM_ACLK_FREERUN		0x00f8 0x0384 0x0000 4 0
+#define MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13		0x00f8 0x0384 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_EN__KPP_COL06		0x00f8 0x0384 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_EN__USB_OTG2_OC		0x00f8 0x0384 0x0660 8 1
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_TX_CLK		0x00fc 0x0388 0x0000 0 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS		0x00fc 0x0388 0x0000 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__UART8_DTE_RTS		0x00fc 0x0388 0x0658 1 0
+#define MX6UL_PAD_ENET2_TX_CLK__SIM2_PORT0_RST_B	0x00fc 0x0388 0x0000 2 0
+#define MX6UL_PAD_ENET2_TX_CLK__ECSPI4_MISO		0x00fc 0x0388 0x0568 3 0
+#define MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2		0x00fc 0x0388 0x057c 4 2
+#define MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14		0x00fc 0x0388 0x0000 5 0
+#define MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07		0x00fc 0x0388 0x0000 6 0
+#define MX6UL_PAD_ENET2_TX_CLK__ANATOP_OTG2_ID		0x00fc 0x0388 0x04bc 8 1
+#define MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER		0x0100 0x038c 0x0000 0 0
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS		0x0100 0x038c 0x0658 1 1
+#define MX6UL_PAD_ENET2_RX_ER__UART8_DTE_CTS		0x0100 0x038c 0x0000 1 0
+#define MX6UL_PAD_ENET2_RX_ER__SIM2_PORT0_SVEN		0x0100 0x038c 0x0000 2 0
+#define MX6UL_PAD_ENET2_RX_ER__ECSPI4_SS0		0x0100 0x038c 0x0000 3 0
+#define MX6UL_PAD_ENET2_RX_ER__EIM_ADDR25		0x0100 0x038c 0x0000 4 0
+#define MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15		0x0100 0x038c 0x0000 5 0
+#define MX6UL_PAD_ENET2_RX_ER__KPP_COL07		0x0100 0x038c 0x0000 6 0
+#define MX6UL_PAD_ENET2_RX_ER__WDOG1_WDOG_ANY		0x0100 0x038c 0x0000 8 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_CLK			0x0104 0x0390 0x0000 0 0
+#define MX6UL_PAD_LCD_CLK__LCDIF_WR_RWN			0x0104 0x0390 0x0000 1 0
+#define MX6UL_PAD_LCD_CLK__UART4_DCE_TX			0x0104 0x0390 0x0000 2 0
+#define MX6UL_PAD_LCD_CLK__UART4_DTE_RX			0x0104 0x0390 0x063c 2 2
+#define MX6UL_PAD_LCD_CLK__SAI3_MCLK			0x0104 0x0390 0x0000 3 0
+#define MX6UL_PAD_LCD_CLK__EIM_CS2_B			0x0104 0x0390 0x0000 4 0
+#define MX6UL_PAD_LCD_CLK__GPIO3_IO00			0x0104 0x0390 0x0000 5 0
+#define MX6UL_PAD_LCD_CLK__WDOG1_WDOG_RST_B_DEB		0x0104 0x0390 0x0000 8 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE		0x0108 0x0394 0x0000 0 0
+#define MX6UL_PAD_LCD_ENABLE__LCDIF_RD_E		0x0108 0x0394 0x0000 1 0
+#define MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX		0x0108 0x0394 0x063c 2 3
+#define MX6UL_PAD_LCD_ENABLE__UART4_DTE_TX		0x0108 0x0394 0x0000 2 0
+#define MX6UL_PAD_LCD_ENABLE__SAI3_TX_SYNC		0x0108 0x0394 0x060c 3 0
+#define MX6UL_PAD_LCD_ENABLE__EIM_CS3_B			0x0108 0x0394 0x0000 4 0
+#define MX6UL_PAD_LCD_ENABLE__GPIO3_IO01		0x0108 0x0394 0x0000 5 0
+#define MX6UL_PAD_LCD_ENABLE__ECSPI2_RDY		0x0108 0x0394 0x0000 8 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC		0x010c 0x0398 0x05dc 0 0
+#define MX6UL_PAD_LCD_HSYNC__LCDIF_RS			0x010c 0x0398 0x0000 1 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS		0x010c 0x0398 0x0000 2 0
+#define MX6UL_PAD_LCD_HSYNC__UART4_DTE_RTS		0x010c 0x0398 0x0638 2 2
+#define MX6UL_PAD_LCD_HSYNC__SAI3_TX_BCLK		0x010c 0x0398 0x0608 3 0
+#define MX6UL_PAD_LCD_HSYNC__WDOG3_WDOG_RST_B_DEB	0x010c 0x0398 0x0000 4 0
+#define MX6UL_PAD_LCD_HSYNC__GPIO3_IO02			0x010c 0x0398 0x0000 5 0
+#define MX6UL_PAD_LCD_HSYNC__ECSPI2_SS1			0x010c 0x0398 0x0000 8 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC		0x0110 0x039c 0x0000 0 0
+#define MX6UL_PAD_LCD_VSYNC__LCDIF_BUSY			0x0110 0x039c 0x05dc 1 1
+#define MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS		0x0110 0x039c 0x0638 2 3
+#define MX6UL_PAD_LCD_VSYNC__UART4_DTE_CTS		0x0110 0x039c 0x0000 2 0
+#define MX6UL_PAD_LCD_VSYNC__SAI3_RX_DATA		0x0110 0x039c 0x0000 3 0
+#define MX6UL_PAD_LCD_VSYNC__WDOG2_WDOG_B		0x0110 0x039c 0x0000 4 0
+#define MX6UL_PAD_LCD_VSYNC__GPIO3_IO03			0x0110 0x039c 0x0000 5 0
+#define MX6UL_PAD_LCD_VSYNC__ECSPI2_SS2			0x0110 0x039c 0x0000 8 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_RESET		0x0114 0x03a0 0x0000 0 0
+#define MX6UL_PAD_LCD_RESET__LCDIF_CS			0x0114 0x03a0 0x0000 1 0
+#define MX6UL_PAD_LCD_RESET__CA7_MX6UL_EVENTI		0x0114 0x03a0 0x0000 2 0
+#define MX6UL_PAD_LCD_RESET__SAI3_TX_DATA		0x0114 0x03a0 0x0000 3 0
+#define MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY		0x0114 0x03a0 0x0000 4 0
+#define MX6UL_PAD_LCD_RESET__GPIO3_IO04			0x0114 0x03a0 0x0000 5 0
+#define MX6UL_PAD_LCD_RESET__ECSPI2_SS3			0x0114 0x03a0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA00__LCDIF_DATA00		0x0118 0x03a4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA00__PWM1_OUT			0x0118 0x03a4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA00__ENET1_1588_EVENT2_IN	0x0118 0x03a4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA00__I2C3_SDA			0x0118 0x03a4 0x05b8 4 2
+#define MX6UL_PAD_LCD_DATA00__GPIO3_IO05		0x0118 0x03a4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA00__SRC_BT_CFG00		0x0118 0x03a4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA00__SAI1_MCLK			0x0118 0x03a4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA01__LCDIF_DATA01		0x011c 0x03a8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA01__PWM2_OUT			0x011c 0x03a8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA01__ENET1_1588_EVENT2_OUT	0x011c 0x03a8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA01__I2C3_SCL			0x011c 0x03a8 0x05b4 4 2
+#define MX6UL_PAD_LCD_DATA01__GPIO3_IO06		0x011c 0x03a8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA01__SRC_BT_CFG01		0x011c 0x03a8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA01__SAI1_TX_SYNC		0x011c 0x03a8 0x05ec 8 0
+#define MX6UL_PAD_LCD_DATA02__LCDIF_DATA02		0x0120 0x03ac 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA02__PWM3_OUT			0x0120 0x03ac 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA02__ENET1_1588_EVENT3_IN	0x0120 0x03ac 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA02__I2C4_SDA			0x0120 0x03ac 0x05c0 4 2
+#define MX6UL_PAD_LCD_DATA02__GPIO3_IO07		0x0120 0x03ac 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA02__SRC_BT_CFG02		0x0120 0x03ac 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA02__SAI1_TX_BCLK		0x0120 0x03ac 0x05e8 8 0
+#define MX6UL_PAD_LCD_DATA03__LCDIF_DATA03		0x0124 0x03b0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA03__PWM4_OUT			0x0124 0x03b0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA03__ENET1_1588_EVENT3_OUT	0x0124 0x03b0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA03__I2C4_SCL			0x0124 0x03b0 0x05bc 4 2
+#define MX6UL_PAD_LCD_DATA03__GPIO3_IO08		0x0124 0x03b0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA03__SRC_BT_CFG03		0x0124 0x03b0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA03__SAI1_RX_DATA		0x0124 0x03b0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA04__LCDIF_DATA04		0x0128 0x03b4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DCE_CTS		0x0128 0x03b4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA04__UART8_DTE_RTS		0x0128 0x03b4 0x0658 1 2
+#define MX6UL_PAD_LCD_DATA04__ENET2_1588_EVENT2_IN	0x0128 0x03b4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA04__SPDIF_SR_CLK		0x0128 0x03b4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA04__GPIO3_IO09		0x0128 0x03b4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA04__SRC_BT_CFG04		0x0128 0x03b4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA04__SAI1_TX_DATA		0x0128 0x03b4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA05__LCDIF_DATA05		0x012c 0x03b8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA05__UART8_DCE_RTS		0x012c 0x03b8 0x0658 1 3
+#define MX6UL_PAD_LCD_DATA05__UART8_DTE_CTS		0x012c 0x03b8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA05__ENET2_1588_EVENT2_OUT	0x012c 0x03b8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA05__SPDIF_OUT			0x012c 0x03b8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA05__GPIO3_IO10		0x012c 0x03b8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA05__SRC_BT_CFG05		0x012c 0x03b8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA05__ECSPI1_SS1		0x012c 0x03b8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA06__LCDIF_DATA06		0x0130 0x03bc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DCE_CTS		0x0130 0x03bc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA06__UART7_DTE_RTS		0x0130 0x03bc 0x0650 1 2
+#define MX6UL_PAD_LCD_DATA06__ENET2_1588_EVENT3_IN	0x0130 0x03bc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA06__SPDIF_LOCK		0x0130 0x03bc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA06__GPIO3_IO11		0x0130 0x03bc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA06__SRC_BT_CFG06		0x0130 0x03bc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA06__ECSPI1_SS2		0x0130 0x03bc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA07__LCDIF_DATA07		0x0134 0x03c0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA07__UART7_DCE_RTS		0x0134 0x03c0 0x0650 1 3
+#define MX6UL_PAD_LCD_DATA07__UART7_DTE_CTS		0x0134 0x03c0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA07__ENET2_1588_EVENT3_OUT	0x0134 0x03c0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA07__SPDIF_EXT_CLK		0x0134 0x03c0 0x061c 4 0
+#define MX6UL_PAD_LCD_DATA07__GPIO3_IO12		0x0134 0x03c0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA07__SRC_BT_CFG07		0x0134 0x03c0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA07__ECSPI1_SS3		0x0134 0x03c0 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA08__LCDIF_DATA08		0x0138 0x03c4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA08__SPDIF_IN			0x0138 0x03c4 0x0618 1 2
+#define MX6UL_PAD_LCD_DATA08__CSI_DATA16		0x0138 0x03c4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA08__EIM_DATA00		0x0138 0x03c4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA08__GPIO3_IO13		0x0138 0x03c4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA08__SRC_BT_CFG08		0x0138 0x03c4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX		0x0138 0x03c4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA09__LCDIF_DATA09		0x013c 0x03c8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA09__SAI3_MCLK			0x013c 0x03c8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA09__CSI_DATA17		0x013c 0x03c8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA09__EIM_DATA01		0x013c 0x03c8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA09__GPIO3_IO14		0x013c 0x03c8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA09__SRC_BT_CFG09		0x013c 0x03c8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX		0x013c 0x03c8 0x0584 8 2
+#define MX6UL_PAD_LCD_DATA10__LCDIF_DATA10		0x0140 0x03cc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA10__SAI3_RX_SYNC		0x0140 0x03cc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA10__CSI_DATA18		0x0140 0x03cc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA10__EIM_DATA02		0x0140 0x03cc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA10__GPIO3_IO15		0x0140 0x03cc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA10__SRC_BT_CFG10		0x0140 0x03cc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX		0x0140 0x03cc 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA11__LCDIF_DATA11		0x0144 0x03d0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA11__SAI3_RX_BCLK		0x0144 0x03d0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA11__CSI_DATA19		0x0144 0x03d0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA11__EIM_DATA03		0x0144 0x03d0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA11__GPIO3_IO16		0x0144 0x03d0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA11__SRC_BT_CFG11		0x0144 0x03d0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX		0x0144 0x03d0 0x0588 8 2
+#define MX6UL_PAD_LCD_DATA12__LCDIF_DATA12		0x0148 0x03d4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA12__SAI3_TX_SYNC		0x0148 0x03d4 0x060c 1 1
+#define MX6UL_PAD_LCD_DATA12__CSI_DATA20		0x0148 0x03d4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA12__EIM_DATA04		0x0148 0x03d4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA12__GPIO3_IO17		0x0148 0x03d4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA12__SRC_BT_CFG12		0x0148 0x03d4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA12__ECSPI1_RDY		0x0148 0x03d4 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA13__LCDIF_DATA13		0x014c 0x03d8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA13__SAI3_TX_BCLK		0x014c 0x03d8 0x0608 1 1
+#define MX6UL_PAD_LCD_DATA13__CSI_DATA21		0x014c 0x03d8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA13__EIM_DATA05		0x014c 0x03d8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA13__GPIO3_IO18		0x014c 0x03d8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA13__SRC_BT_CFG13		0x014c 0x03d8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA13__USDHC2_RESET_B		0x014c 0x03d8 0x0000 8 0
+#define MX6UL_PAD_LCD_DATA14__LCDIF_DATA14		0x0150 0x03dc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA14__SAI3_RX_DATA		0x0150 0x03dc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA14__CSI_DATA22		0x0150 0x03dc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA14__EIM_DATA06		0x0150 0x03dc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA14__GPIO3_IO19		0x0150 0x03dc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA14__SRC_BT_CFG14		0x0150 0x03dc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA14__USDHC2_DATA4		0x0150 0x03dc 0x068c 8 0
+#define MX6UL_PAD_LCD_DATA15__LCDIF_DATA15		0x0154 0x03e0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA15__SAI3_TX_DATA		0x0154 0x03e0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA15__CSI_DATA23		0x0154 0x03e0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA15__EIM_DATA07		0x0154 0x03e0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA15__GPIO3_IO20		0x0154 0x03e0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA15__SRC_BT_CFG15		0x0154 0x03e0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA15__USDHC2_DATA5		0x0154 0x03e0 0x0690 8 0
+#define MX6UL_PAD_LCD_DATA16__LCDIF_DATA16		0x0158 0x03e4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DCE_TX		0x0158 0x03e4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA16__UART7_DTE_RX		0x0158 0x03e4 0x0654 1 2
+#define MX6UL_PAD_LCD_DATA16__CSI_DATA01		0x0158 0x03e4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA16__EIM_DATA08		0x0158 0x03e4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA16__GPIO3_IO21		0x0158 0x03e4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA16__SRC_BT_CFG24		0x0158 0x03e4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA16__USDHC2_DATA6		0x0158 0x03e4 0x0694 8 0
+#define MX6UL_PAD_LCD_DATA17__LCDIF_DATA17		0x015c 0x03e8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA17__UART7_DCE_RX		0x015c 0x03e8 0x0654 1 3
+#define MX6UL_PAD_LCD_DATA17__UART7_DTE_TX		0x015c 0x03e8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA17__CSI_DATA00		0x015c 0x03e8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA17__EIM_DATA09		0x015c 0x03e8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA17__GPIO3_IO22		0x015c 0x03e8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA17__SRC_BT_CFG25		0x015c 0x03e8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA17__USDHC2_DATA7		0x015c 0x03e8 0x0698 8 0
+#define MX6UL_PAD_LCD_DATA18__LCDIF_DATA18		0x0160 0x03ec 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA18__PWM5_OUT			0x0160 0x03ec 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA18__CA7_MX6UL_EVENTO		0x0160 0x03ec 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA18__CSI_DATA10		0x0160 0x03ec 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA18__EIM_DATA10		0x0160 0x03ec 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA18__GPIO3_IO23		0x0160 0x03ec 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA18__SRC_BT_CFG26		0x0160 0x03ec 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA18__USDHC2_CMD		0x0160 0x03ec 0x0678 8 1
+#define MX6UL_PAD_LCD_DATA19__EIM_DATA11		0x0164 0x03f0 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA19__GPIO3_IO24		0x0164 0x03f0 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA19__SRC_BT_CFG27		0x0164 0x03f0 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA19__USDHC2_CLK		0x0164 0x03f0 0x0670 8 1
+#define MX6UL_PAD_LCD_DATA19__LCDIF_DATA19		0x0164 0x03f0 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA19__PWM6_OUT			0x0164 0x03f0 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA19__WDOG1_WDOG_ANY		0x0164 0x03f0 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA19__CSI_DATA11		0x0164 0x03f0 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA20__EIM_DATA12		0x0168 0x03f4 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA20__GPIO3_IO25		0x0168 0x03f4 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA20__SRC_BT_CFG28		0x0168 0x03f4 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA20__USDHC2_DATA0		0x0168 0x03f4 0x067c 8 1
+#define MX6UL_PAD_LCD_DATA20__LCDIF_DATA20		0x0168 0x03f4 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DCE_TX		0x0168 0x03f4 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA20__UART8_DTE_RX		0x0168 0x03f4 0x065c 1 2
+#define MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK		0x0168 0x03f4 0x0534 2 0
+#define MX6UL_PAD_LCD_DATA20__CSI_DATA12		0x0168 0x03f4 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__LCDIF_DATA21		0x016c 0x03f8 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA21__UART8_DCE_RX		0x016c 0x03f8 0x065c 1 3
+#define MX6UL_PAD_LCD_DATA21__UART8_DTE_TX		0x016c 0x03f8 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA21__ECSPI1_SS0		0x016c 0x03f8 0x0000 2 0
+#define MX6UL_PAD_LCD_DATA21__CSI_DATA13		0x016c 0x03f8 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA21__EIM_DATA13		0x016c 0x03f8 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA21__GPIO3_IO26		0x016c 0x03f8 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA21__SRC_BT_CFG29		0x016c 0x03f8 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA21__USDHC2_DATA1		0x016c 0x03f8 0x0680 8 1
+#define MX6UL_PAD_LCD_DATA22__LCDIF_DATA22		0x0170 0x03fc 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA22__MQS_RIGHT			0x0170 0x03fc 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI		0x0170 0x03fc 0x053c 2 0
+#define MX6UL_PAD_LCD_DATA22__CSI_DATA14		0x0170 0x03fc 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA22__EIM_DATA14		0x0170 0x03fc 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA22__GPIO3_IO27		0x0170 0x03fc 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA22__SRC_BT_CFG30		0x0170 0x03fc 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA22__USDHC2_DATA2		0x0170 0x03fc 0x0684 8 0
+#define MX6UL_PAD_LCD_DATA23__LCDIF_DATA23		0x0174 0x0400 0x0000 0 0
+#define MX6UL_PAD_LCD_DATA23__MQS_LEFT			0x0174 0x0400 0x0000 1 0
+#define MX6UL_PAD_LCD_DATA23__ECSPI1_MISO		0x0174 0x0400 0x0538 2 0
+#define MX6UL_PAD_LCD_DATA23__CSI_DATA15		0x0174 0x0400 0x0000 3 0
+#define MX6UL_PAD_LCD_DATA23__EIM_DATA15		0x0174 0x0400 0x0000 4 0
+#define MX6UL_PAD_LCD_DATA23__GPIO3_IO28		0x0174 0x0400 0x0000 5 0
+#define MX6UL_PAD_LCD_DATA23__SRC_BT_CFG31		0x0174 0x0400 0x0000 6 0
+#define MX6UL_PAD_LCD_DATA23__USDHC2_DATA3		0x0174 0x0400 0x0688 8 1
+#define MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B		0x0178 0x0404 0x0000 0 0
+#define MX6UL_PAD_NAND_RE_B__USDHC2_CLK			0x0178 0x0404 0x0670 1 2
+#define MX6UL_PAD_NAND_RE_B__QSPI_B_SCLK		0x0178 0x0404 0x0000 2 0
+#define MX6UL_PAD_NAND_RE_B__KPP_ROW00			0x0178 0x0404 0x0000 3 0
+#define MX6UL_PAD_NAND_RE_B__EIM_EB_B00			0x0178 0x0404 0x0000 4 0
+#define MX6UL_PAD_NAND_RE_B__GPIO4_IO00			0x0178 0x0404 0x0000 5 0
+#define MX6UL_PAD_NAND_RE_B__ECSPI3_SS2			0x0178 0x0404 0x0000 8 0
+#define MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B		0x017c 0x0408 0x0000 0 0
+#define MX6UL_PAD_NAND_WE_B__USDHC2_CMD			0x017c 0x0408 0x0678 1 2
+#define MX6UL_PAD_NAND_WE_B__QSPI_B_SS0_B		0x017c 0x0408 0x0000 2 0
+#define MX6UL_PAD_NAND_WE_B__KPP_COL00			0x017c 0x0408 0x0000 3 0
+#define MX6UL_PAD_NAND_WE_B__EIM_EB_B01			0x017c 0x0408 0x0000 4 0
+#define MX6UL_PAD_NAND_WE_B__GPIO4_IO01			0x017c 0x0408 0x0000 5 0
+#define MX6UL_PAD_NAND_WE_B__ECSPI3_SS3			0x017c 0x0408 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00		0x0180 0x040c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA00__USDHC2_DATA0		0x0180 0x040c 0x067c 1 2
+#define MX6UL_PAD_NAND_DATA00__QSPI_B_SS1_B		0x0180 0x040c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA00__KPP_ROW01		0x0180 0x040c 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA00__EIM_AD08			0x0180 0x040c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA00__GPIO4_IO02		0x0180 0x040c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA00__ECSPI4_RDY		0x0180 0x040c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01		0x0184 0x0410 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA01__USDHC2_DATA1		0x0184 0x0410 0x0680 1 2
+#define MX6UL_PAD_NAND_DATA01__QSPI_B_DQS		0x0184 0x0410 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA01__KPP_COL01		0x0184 0x0410 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA01__EIM_AD09			0x0184 0x0410 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA01__GPIO4_IO03		0x0184 0x0410 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA01__ECSPI4_SS1		0x0184 0x0410 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02		0x0188 0x0414 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA02__USDHC2_DATA2		0x0188 0x0414 0x0684 1 1
+#define MX6UL_PAD_NAND_DATA02__QSPI_B_DATA00		0x0188 0x0414 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA02__KPP_ROW02		0x0188 0x0414 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA02__EIM_AD10			0x0188 0x0414 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA02__GPIO4_IO04		0x0188 0x0414 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA02__ECSPI4_SS2		0x0188 0x0414 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03		0x018c 0x0418 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA03__USDHC2_DATA3		0x018c 0x0418 0x0688 1 2
+#define MX6UL_PAD_NAND_DATA03__QSPI_B_DATA01		0x018c 0x0418 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA03__KPP_COL02		0x018c 0x0418 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA03__EIM_AD11			0x018c 0x0418 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA03__GPIO4_IO05		0x018c 0x0418 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA03__ECSPI4_SS3		0x018c 0x0418 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04		0x0190 0x041c 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA04__USDHC2_DATA4		0x0190 0x041c 0x068c 1 1
+#define MX6UL_PAD_NAND_DATA04__QSPI_B_DATA02		0x0190 0x041c 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK		0x0190 0x041c 0x0564 3 1
+#define MX6UL_PAD_NAND_DATA04__EIM_AD12			0x0190 0x041c 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA04__GPIO4_IO06		0x0190 0x041c 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DCE_TX		0x0190 0x041c 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA04__UART2_DTE_RX		0x0190 0x041c 0x062c 8 2
+#define MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05		0x0194 0x0420 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA05__USDHC2_DATA5		0x0194 0x0420 0x0690 1 1
+#define MX6UL_PAD_NAND_DATA05__QSPI_B_DATA03		0x0194 0x0420 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI		0x0194 0x0420 0x056c 3 1
+#define MX6UL_PAD_NAND_DATA05__EIM_AD13			0x0194 0x0420 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA05__GPIO4_IO07		0x0194 0x0420 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA05__UART2_DCE_RX		0x0194 0x0420 0x062c 8 3
+#define MX6UL_PAD_NAND_DATA05__UART2_DTE_TX		0x0194 0x0420 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06		0x0198 0x0424 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA06__USDHC2_DATA6		0x0198 0x0424 0x0694 1 1
+#define MX6UL_PAD_NAND_DATA06__SAI2_RX_BCLK		0x0198 0x0424 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA06__ECSPI4_MISO		0x0198 0x0424 0x0568 3 1
+#define MX6UL_PAD_NAND_DATA06__EIM_AD14			0x0198 0x0424 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA06__GPIO4_IO08		0x0198 0x0424 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS		0x0198 0x0424 0x0000 8 0
+#define MX6UL_PAD_NAND_DATA06__UART2_DTE_RTS		0x0198 0x0424 0x0628 8 4
+#define MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07		0x019c 0x0428 0x0000 0 0
+#define MX6UL_PAD_NAND_DATA07__USDHC2_DATA7		0x019c 0x0428 0x0698 1 1
+#define MX6UL_PAD_NAND_DATA07__QSPI_A_SS1_B		0x019c 0x0428 0x0000 2 0
+#define MX6UL_PAD_NAND_DATA07__ECSPI4_SS0		0x019c 0x0428 0x0000 3 0
+#define MX6UL_PAD_NAND_DATA07__EIM_AD15			0x019c 0x0428 0x0000 4 0
+#define MX6UL_PAD_NAND_DATA07__GPIO4_IO09		0x019c 0x0428 0x0000 5 0
+#define MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS		0x019c 0x0428 0x0628 8 5
+#define MX6UL_PAD_NAND_DATA07__UART2_DTE_CTS		0x019c 0x0428 0x0000 8 0
+#define MX6UL_PAD_NAND_ALE__RAWNAND_ALE			0x01a0 0x042c 0x0000 0 0
+#define MX6UL_PAD_NAND_ALE__USDHC2_RESET_B		0x01a0 0x042c 0x0000 1 0
+#define MX6UL_PAD_NAND_ALE__QSPI_A_DQS			0x01a0 0x042c 0x0000 2 0
+#define MX6UL_PAD_NAND_ALE__PWM3_OUT			0x01a0 0x042c 0x0000 3 0
+#define MX6UL_PAD_NAND_ALE__EIM_ADDR17			0x01a0 0x042c 0x0000 4 0
+#define MX6UL_PAD_NAND_ALE__GPIO4_IO10			0x01a0 0x042c 0x0000 5 0
+#define MX6UL_PAD_NAND_ALE__ECSPI3_SS1			0x01a0 0x042c 0x0000 8 0
+#define MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B		0x01a4 0x0430 0x0000 0 0
+#define MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B		0x01a4 0x0430 0x0000 1 0
+#define MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK		0x01a4 0x0430 0x0000 2 0
+#define MX6UL_PAD_NAND_WP_B__PWM4_OUT			0x01a4 0x0430 0x0000 3 0
+#define MX6UL_PAD_NAND_WP_B__EIM_BCLK			0x01a4 0x0430 0x0000 4 0
+#define MX6UL_PAD_NAND_WP_B__GPIO4_IO11			0x01a4 0x0430 0x0000 5 0
+#define MX6UL_PAD_NAND_WP_B__ECSPI3_RDY			0x01a4 0x0430 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B		0x01a8 0x0434 0x0000 0 0
+#define MX6UL_PAD_NAND_READY_B__USDHC1_DATA4		0x01a8 0x0434 0x0000 1 0
+#define MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00		0x01a8 0x0434 0x0000 2 0
+#define MX6UL_PAD_NAND_READY_B__ECSPI3_SS0		0x01a8 0x0434 0x0000 3 0
+#define MX6UL_PAD_NAND_READY_B__EIM_CS1_B		0x01a8 0x0434 0x0000 4 0
+#define MX6UL_PAD_NAND_READY_B__GPIO4_IO12		0x01a8 0x0434 0x0000 5 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DCE_TX		0x01a8 0x0434 0x0000 8 0
+#define MX6UL_PAD_NAND_READY_B__UART3_DTE_RX		0x01a8 0x0434 0x0634 8 2
+#define MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B		0x01ac 0x0438 0x0000 0 0
+#define MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5		0x01ac 0x0438 0x0000 1 0
+#define MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01		0x01ac 0x0438 0x0000 2 0
+#define MX6UL_PAD_NAND_CE0_B__ECSPI3_SCLK		0x01ac 0x0438 0x0554 3 1
+#define MX6UL_PAD_NAND_CE0_B__EIM_DTACK_B		0x01ac 0x0438 0x0000 4 0
+#define MX6UL_PAD_NAND_CE0_B__GPIO4_IO13		0x01ac 0x0438 0x0000 5 0
+#define MX6UL_PAD_NAND_CE0_B__UART3_DCE_RX		0x01ac 0x0438 0x0634 8 3
+#define MX6UL_PAD_NAND_CE0_B__UART3_DTE_TX		0x01ac 0x0438 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__RAWNAND_CE1_B		0x01b0 0x043c 0x0000 0 0
+#define MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6		0x01b0 0x043c 0x0000 1 0
+#define MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02		0x01b0 0x043c 0x0000 2 0
+#define MX6UL_PAD_NAND_CE1_B__ECSPI3_MOSI		0x01b0 0x043c 0x055c 3 1
+#define MX6UL_PAD_NAND_CE1_B__EIM_ADDR18		0x01b0 0x043c 0x0000 4 0
+#define MX6UL_PAD_NAND_CE1_B__GPIO4_IO14		0x01b0 0x043c 0x0000 5 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DCE_CTS		0x01b0 0x043c 0x0000 8 0
+#define MX6UL_PAD_NAND_CE1_B__UART3_DTE_RTS		0x01b0 0x043c 0x0630 8 2
+#define MX6UL_PAD_NAND_CLE__RAWNAND_CLE			0x01b4 0x0440 0x0000 0 0
+#define MX6UL_PAD_NAND_CLE__USDHC1_DATA7		0x01b4 0x0440 0x0000 1 0
+#define MX6UL_PAD_NAND_CLE__QSPI_A_DATA03		0x01b4 0x0440 0x0000 2 0
+#define MX6UL_PAD_NAND_CLE__ECSPI3_MISO			0x01b4 0x0440 0x0558 3 1
+#define MX6UL_PAD_NAND_CLE__EIM_ADDR16			0x01b4 0x0440 0x0000 4 0
+#define MX6UL_PAD_NAND_CLE__GPIO4_IO15			0x01b4 0x0440 0x0000 5 0
+#define MX6UL_PAD_NAND_CLE__UART3_DCE_RTS		0x01b4 0x0440 0x0630 8 3
+#define MX6UL_PAD_NAND_CLE__UART3_DTE_CTS		0x01b4 0x0440 0x0000 8 0
+#define MX6UL_PAD_NAND_DQS__RAWNAND_DQS			0x01b8 0x0444 0x0000 0 0
+#define MX6UL_PAD_NAND_DQS__CSI_FIELD			0x01b8 0x0444 0x0530 1 1
+#define MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B		0x01b8 0x0444 0x0000 2 0
+#define MX6UL_PAD_NAND_DQS__PWM5_OUT			0x01b8 0x0444 0x0000 3 0
+#define MX6UL_PAD_NAND_DQS__EIM_WAIT			0x01b8 0x0444 0x0000 4 0
+#define MX6UL_PAD_NAND_DQS__GPIO4_IO16			0x01b8 0x0444 0x0000 5 0
+#define MX6UL_PAD_NAND_DQS__SDMA_EXT_EVENT01		0x01b8 0x0444 0x0000 6 0
+#define MX6UL_PAD_NAND_DQS__SPDIF_EXT_CLK		0x01b8 0x0444 0x061c 8 1
+#define MX6UL_PAD_SD1_CMD__USDHC1_CMD			0x01bc 0x0448 0x0000 0 0
+#define MX6UL_PAD_SD1_CMD__GPT2_COMPARE1		0x01bc 0x0448 0x0000 1 0
+#define MX6UL_PAD_SD1_CMD__SAI2_RX_SYNC			0x01bc 0x0448 0x0000 2 0
+#define MX6UL_PAD_SD1_CMD__SPDIF_OUT			0x01bc 0x0448 0x0000 3 0
+#define MX6UL_PAD_SD1_CMD__EIM_ADDR19			0x01bc 0x0448 0x0000 4 0
+#define MX6UL_PAD_SD1_CMD__GPIO2_IO16			0x01bc 0x0448 0x0000 5 0
+#define MX6UL_PAD_SD1_CMD__SDMA_EXT_EVENT00		0x01bc 0x0448 0x0000 6 0
+#define MX6UL_PAD_SD1_CMD__USB_OTG1_PWR			0x01bc 0x0448 0x0000 8 0
+#define MX6UL_PAD_SD1_CLK__USDHC1_CLK			0x01c0 0x044c 0x0000 0 0
+#define MX6UL_PAD_SD1_CLK__GPT2_COMPARE2		0x01c0 0x044c 0x0000 1 0
+#define MX6UL_PAD_SD1_CLK__SAI2_MCLK			0x01c0 0x044c 0x0000 2 0
+#define MX6UL_PAD_SD1_CLK__SPDIF_IN			0x01c0 0x044c 0x0618 3 3
+#define MX6UL_PAD_SD1_CLK__EIM_ADDR20			0x01c0 0x044c 0x0000 4 0
+#define MX6UL_PAD_SD1_CLK__GPIO2_IO17			0x01c0 0x044c 0x0000 5 0
+#define MX6UL_PAD_SD1_CLK__USB_OTG1_OC			0x01c0 0x044c 0x0664 8 2
+#define MX6UL_PAD_SD1_DATA0__USDHC1_DATA0		0x01c4 0x0450 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA0__GPT2_COMPARE3		0x01c4 0x0450 0x0000 1 0
+#define MX6UL_PAD_SD1_DATA0__SAI2_TX_SYNC		0x01c4 0x0450 0x05fc 2 1
+#define MX6UL_PAD_SD1_DATA0__FLEXCAN1_TX		0x01c4 0x0450 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA0__EIM_ADDR21			0x01c4 0x0450 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA0__GPIO2_IO18			0x01c4 0x0450 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA0__ANATOP_OTG1_ID		0x01c4 0x0450 0x04b8 8 2
+#define MX6UL_PAD_SD1_DATA1__USDHC1_DATA1		0x01c8 0x0454 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA1__GPT2_CLK			0x01c8 0x0454 0x05a0 1 1
+#define MX6UL_PAD_SD1_DATA1__SAI2_TX_BCLK		0x01c8 0x0454 0x05f8 2 1
+#define MX6UL_PAD_SD1_DATA1__FLEXCAN1_RX		0x01c8 0x0454 0x0584 3 3
+#define MX6UL_PAD_SD1_DATA1__EIM_ADDR22			0x01c8 0x0454 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA1__GPIO2_IO19			0x01c8 0x0454 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA1__USB_OTG2_PWR		0x01c8 0x0454 0x0000 8 0
+#define MX6UL_PAD_SD1_DATA2__USDHC1_DATA2		0x01cc 0x0458 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA2__GPT2_CAPTURE1		0x01cc 0x0458 0x0598 1 1
+#define MX6UL_PAD_SD1_DATA2__SAI2_RX_DATA		0x01cc 0x0458 0x05f4 2 1
+#define MX6UL_PAD_SD1_DATA2__FLEXCAN2_TX		0x01cc 0x0458 0x0000 3 0
+#define MX6UL_PAD_SD1_DATA2__EIM_ADDR23			0x01cc 0x0458 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA2__GPIO2_IO20			0x01cc 0x0458 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA2__CCM_CLKO1			0x01cc 0x0458 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA2__USB_OTG2_OC		0x01cc 0x0458 0x0660 8 2
+#define MX6UL_PAD_SD1_DATA3__USDHC1_DATA3		0x01d0 0x045c 0x0000 0 0
+#define MX6UL_PAD_SD1_DATA3__GPT2_CAPTURE2		0x01d0 0x045c 0x059c 1 1
+#define MX6UL_PAD_SD1_DATA3__SAI2_TX_DATA		0x01d0 0x045c 0x0000 2 0
+#define MX6UL_PAD_SD1_DATA3__FLEXCAN2_RX		0x01d0 0x045c 0x0588 3 3
+#define MX6UL_PAD_SD1_DATA3__EIM_ADDR24			0x01d0 0x045c 0x0000 4 0
+#define MX6UL_PAD_SD1_DATA3__GPIO2_IO21			0x01d0 0x045c 0x0000 5 0
+#define MX6UL_PAD_SD1_DATA3__CCM_CLKO2			0x01d0 0x045c 0x0000 6 0
+#define MX6UL_PAD_SD1_DATA3__ANATOP_OTG2_ID		0x01d0 0x045c 0x04bc 8 2
+#define MX6UL_PAD_CSI_MCLK__CSI_MCLK			0x01d4 0x0460 0x0000 0 0
+#define MX6UL_PAD_CSI_MCLK__USDHC2_CD_B			0x01d4 0x0460 0x0674 1 0
+#define MX6UL_PAD_CSI_MCLK__RAWNAND_CE2_B		0x01d4 0x0460 0x0000 2 0
+#define MX6UL_PAD_CSI_MCLK__I2C1_SDA			0x01d4 0x0460 0x05a8 3 0
+#define MX6UL_PAD_CSI_MCLK__EIM_CS0_B			0x01d4 0x0460 0x0000 4 0
+#define MX6UL_PAD_CSI_MCLK__GPIO4_IO17			0x01d4 0x0460 0x0000 5 0
+#define MX6UL_PAD_CSI_MCLK__SNVS_HP_VIO_5_CTL		0x01d4 0x0460 0x0000 6 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DCE_TX		0x01d4 0x0460 0x0000 8 0
+#define MX6UL_PAD_CSI_MCLK__UART6_DTE_RX		0x01d4 0x0460 0x064c 8 0
+#define MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK		0x01d8 0x0464 0x0528 0 1
+#define MX6UL_PAD_CSI_PIXCLK__USDHC2_WP			0x01d8 0x0464 0x069c 1 2
+#define MX6UL_PAD_CSI_PIXCLK__RAWNAND_CE3_B		0x01d8 0x0464 0x0000 2 0
+#define MX6UL_PAD_CSI_PIXCLK__I2C1_SCL			0x01d8 0x0464 0x05a4 3 2
+#define MX6UL_PAD_CSI_PIXCLK__EIM_OE			0x01d8 0x0464 0x0000 4 0
+#define MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18		0x01d8 0x0464 0x0000 5 0
+#define MX6UL_PAD_CSI_PIXCLK__SNVS_HP_VIO_5		0x01d8 0x0464 0x0000 6 0
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX		0x01d8 0x0464 0x064c 8 3
+#define MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX		0x01d8 0x0464 0x0000 8 0
+#define MX6UL_PAD_CSI_VSYNC__CSI_VSYNC			0x01dc 0x0468 0x052c 0 0
+#define MX6UL_PAD_CSI_VSYNC__USDHC2_CLK			0x01dc 0x0468 0x0670 1 0
+#define MX6UL_PAD_CSI_VSYNC__SIM1_PORT1_CLK		0x01dc 0x0468 0x0000 2 0
+#define MX6UL_PAD_CSI_VSYNC__I2C2_SDA			0x01dc 0x0468 0x05b0 3 0
+#define MX6UL_PAD_CSI_VSYNC__EIM_RW			0x01dc 0x0468 0x0000 4 0
+#define MX6UL_PAD_CSI_VSYNC__GPIO4_IO19			0x01dc 0x0468 0x0000 5 0
+#define MX6UL_PAD_CSI_VSYNC__PWM7_OUT			0x01dc 0x0468 0x0000 6 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS		0x01dc 0x0468 0x0648 8 0
+#define MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS		0x01dc 0x0468 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__CSI_HSYNC			0x01e0 0x046c 0x0524 0 0
+#define MX6UL_PAD_CSI_HSYNC__USDHC2_CMD			0x01e0 0x046c 0x0678 1 0
+#define MX6UL_PAD_CSI_HSYNC__SIM1_PORT1_PD		0x01e0 0x046c 0x0000 2 0
+#define MX6UL_PAD_CSI_HSYNC__I2C2_SCL			0x01e0 0x046c 0x05ac 3 0
+#define MX6UL_PAD_CSI_HSYNC__EIM_LBA_B			0x01e0 0x046c 0x0000 4 0
+#define MX6UL_PAD_CSI_HSYNC__GPIO4_IO20			0x01e0 0x046c 0x0000 5 0
+#define MX6UL_PAD_CSI_HSYNC__PWM8_OUT			0x01e0 0x046c 0x0000 6 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS		0x01e0 0x046c 0x0000 8 0
+#define MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS		0x01e0 0x046c 0x0648 8 1
+#define MX6UL_PAD_CSI_DATA00__CSI_DATA02		0x01e4 0x0470 0x04c4 0 0
+#define MX6UL_PAD_CSI_DATA00__USDHC2_DATA0		0x01e4 0x0470 0x067c 1 0
+#define MX6UL_PAD_CSI_DATA00__SIM1_PORT1_RST_B		0x01e4 0x0470 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK		0x01e4 0x0470 0x0544 3 0
+#define MX6UL_PAD_CSI_DATA00__EIM_AD00			0x01e4 0x0470 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA00__GPIO4_IO21		0x01e4 0x0470 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA00__SRC_INT_BOOT		0x01e4 0x0470 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DCE_TX		0x01e4 0x0470 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA00__UART5_DTE_RX		0x01e4 0x0470 0x0644 8 0
+#define MX6UL_PAD_CSI_DATA01__CSI_DATA03		0x01e8 0x0474 0x04c8 0 0
+#define MX6UL_PAD_CSI_DATA01__USDHC2_DATA1		0x01e8 0x0474 0x0680 1 0
+#define MX6UL_PAD_CSI_DATA01__SIM1_PORT1_SVEN		0x01e8 0x0474 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA01__ECSPI2_SS0		0x01e8 0x0474 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA01__EIM_AD01			0x01e8 0x0474 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA01__GPIO4_IO22		0x01e8 0x0474 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA01__SAI1_MCLK			0x01e8 0x0474 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA01__UART5_DCE_RX		0x01e8 0x0474 0x0644 8 1
+#define MX6UL_PAD_CSI_DATA01__UART5_DTE_TX		0x01e8 0x0474 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA02__CSI_DATA04		0x01ec 0x0478 0x04d8 0 1
+#define MX6UL_PAD_CSI_DATA02__USDHC2_DATA2		0x01ec 0x0478 0x0684 1 2
+#define MX6UL_PAD_CSI_DATA02__SIM1_PORT1_TRXD		0x01ec 0x0478 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI		0x01ec 0x0478 0x054c 3 1
+#define MX6UL_PAD_CSI_DATA02__EIM_AD02			0x01ec 0x0478 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x01ec 0x0478 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA02__SAI1_RX_SYNC		0x01ec 0x0478 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS		0x01ec 0x0478 0x0640 8 5
+#define MX6UL_PAD_CSI_DATA02__UART5_DTE_CTS		0x01ec 0x0478 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__CSI_DATA05		0x01f0 0x047c 0x04cc 0 0
+#define MX6UL_PAD_CSI_DATA03__USDHC2_DATA3		0x01f0 0x047c 0x0688 1 0
+#define MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0x01f0 0x047c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA03__ECSPI2_MISO		0x01f0 0x047c 0x0548 3 0
+#define MX6UL_PAD_CSI_DATA03__EIM_AD03			0x01f0 0x047c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA03__GPIO4_IO24		0x01f0 0x047c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA03__SAI1_RX_BCLK		0x01f0 0x047c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DCE_CTS		0x01f0 0x047c 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA03__UART5_DTE_RTS		0x01f0 0x047c 0x0640 8 0
+#define MX6UL_PAD_CSI_DATA04__CSI_DATA06		0x01f4 0x0480 0x04dc 0 1
+#define MX6UL_PAD_CSI_DATA04__USDHC2_DATA4		0x01f4 0x0480 0x068c 1 2
+#define MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x01f4 0x0480 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK		0x01f4 0x0480 0x0534 3 1
+#define MX6UL_PAD_CSI_DATA04__EIM_AD04			0x01f4 0x0480 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA04__GPIO4_IO25		0x01f4 0x0480 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC		0x01f4 0x0480 0x05ec 6 1
+#define MX6UL_PAD_CSI_DATA04__USDHC1_WP			0x01f4 0x0480 0x066c 8 2
+#define MX6UL_PAD_CSI_DATA05__CSI_DATA07		0x01f8 0x0484 0x04e0 0 1
+#define MX6UL_PAD_CSI_DATA05__USDHC2_DATA5		0x01f8 0x0484 0x0690 1 2
+#define MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0x01f8 0x0484 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA05__ECSPI1_SS0		0x01f8 0x0484 0x0000 3 0
+#define MX6UL_PAD_CSI_DATA05__EIM_AD05			0x01f8 0x0484 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA05__GPIO4_IO26		0x01f8 0x0484 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK		0x01f8 0x0484 0x05e8 6 1
+#define MX6UL_PAD_CSI_DATA05__USDHC1_CD_B		0x01f8 0x0484 0x0668 8 2
+#define MX6UL_PAD_CSI_DATA06__CSI_DATA08		0x01fc 0x0488 0x04e4 0 1
+#define MX6UL_PAD_CSI_DATA06__USDHC2_DATA6		0x01fc 0x0488 0x0694 1 2
+#define MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0x01fc 0x0488 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI		0x01fc 0x0488 0x053c 3 1
+#define MX6UL_PAD_CSI_DATA06__EIM_AD06			0x01fc 0x0488 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA06__GPIO4_IO27		0x01fc 0x0488 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA		0x01fc 0x0488 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA06__USDHC1_RESET_B		0x01fc 0x0488 0x0000 8 0
+#define MX6UL_PAD_CSI_DATA07__CSI_DATA09		0x0200 0x048c 0x04e8 0 1
+#define MX6UL_PAD_CSI_DATA07__USDHC2_DATA7		0x0200 0x048c 0x0698 1 2
+#define MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0x0200 0x048c 0x0000 2 0
+#define MX6UL_PAD_CSI_DATA07__ECSPI1_MISO		0x0200 0x048c 0x0538 3 1
+#define MX6UL_PAD_CSI_DATA07__EIM_AD07			0x0200 0x048c 0x0000 4 0
+#define MX6UL_PAD_CSI_DATA07__GPIO4_IO28		0x0200 0x048c 0x0000 5 0
+#define MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA		0x0200 0x048c 0x0000 6 0
+#define MX6UL_PAD_CSI_DATA07__USDHC1_VSELECT		0x0200 0x048c 0x0000 8 0
 
 #endif /* __DTS_IMX6UL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 09edbedfd908..71778992f03d 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/clock/imx6ul-clock.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "imx6ul-pinfunc.h"
 #include "skeleton.dtsi"
@@ -135,6 +136,44 @@
 			status = "disabled";
 		};
 
+		ocram: sram@00900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+		};
+
+		dma_apbh: dma-apbh@01804000 {
+			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x01804000 0x2000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clks IMX6UL_CLK_APBHDMA>;
+		};
+
+		gpmi: gpmi-nand@01806000         {
+			compatible = "fsl,imx6q-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x01806000 0x2000>, <0x01808000 0x2000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clks IMX6UL_CLK_GPMI_IO>,
+				 <&clks IMX6UL_CLK_GPMI_APB>,
+				 <&clks IMX6UL_CLK_GPMI_BCH>,
+				 <&clks IMX6UL_CLK_GPMI_BCH_APB>,
+				 <&clks IMX6UL_CLK_PER_BCH>;
+			clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
+				      "gpmi_bch_apb", "per1_bch";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+
 		aips1: aips-bus@02000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
@@ -229,6 +268,126 @@
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
+
+				sai1: sai@02028000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI1_IPG>,
+						 <&clks IMX6UL_CLK_SAI1>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 35 24 0>,
+					       <&sdma 36 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai2: sai@0202c000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI2_IPG>,
+						 <&clks IMX6UL_CLK_SAI2>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 37 24 0>,
+					       <&sdma 38 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+
+				sai3: sai@02030000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx6ul-sai", "fsl,imx6sx-sai";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_SAI3_IPG>,
+						 <&clks IMX6UL_CLK_SAI3>,
+						 <&clks IMX6UL_CLK_DUMMY>, <&clks IMX6UL_CLK_DUMMY>;
+					clock-names = "bus", "mclk1", "mclk2", "mclk3";
+					dmas = <&sdma 39 24 0>,
+					       <&sdma 40 24 0>;
+					dma-names = "rx", "tx";
+					status = "disabled";
+				};
+			};
+
+			tsc: tsc@02040000 {
+				compatible = "fsl,imx6ul-tsc";
+				reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_IPG>,
+					 <&clks IMX6UL_CLK_ADC2>;
+				clock-names = "tsc", "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@02080000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM1>,
+					 <&clks IMX6UL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@02084000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM2>,
+					 <&clks IMX6UL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@02088000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM3>,
+					 <&clks IMX6UL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@0208c000 {
+				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_PWM4>,
+					 <&clks IMX6UL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			can1: flexcan@02090000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02090000 0x4000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
+					 <&clks IMX6UL_CLK_CAN1_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: flexcan@02094000 {
+				compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x02094000 0x4000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
+					 <&clks IMX6UL_CLK_CAN2_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
 			};
 
 			gpt1: gpt@02098000 {
@@ -312,6 +471,14 @@
 				status = "disabled";
 			};
 
+			kpp: kpp@020b8000 {
+				compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_KPP>;
+				status = "disabled";
+			};
+
 			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
@@ -424,6 +591,14 @@
 						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+					status = "disabled";
+				};
+
 				snvs_pwrkey: snvs-powerkey {
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
@@ -474,49 +649,65 @@
 				compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
 				reg = <0x020e8000 0x4000>;
 				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_DUMMY>,
-					 <&clks IMX6UL_CLK_DUMMY>;
+				clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
+					 <&clks IMX6UL_CLK_GPT2_SERIAL>;
 				clock-names = "ipg", "per";
 			};
 
+			sdma: sdma@020ec000 {
+				compatible = "fsl,imx6ul-sdma", "fsl,imx6q-sdma",
+					     "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_SDMA>,
+					 <&clks IMX6UL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
 			pwm5: pwm@020f0000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020f0000 0x4000>;
 				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_DUMMY>,
-					 <&clks IMX6UL_CLK_DUMMY>;
+				clocks = <&clks IMX6UL_CLK_PWM5>,
+					 <&clks IMX6UL_CLK_PWM5>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm6: pwm@020f4000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020f4000 0x4000>;
 				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_DUMMY>,
-					 <&clks IMX6UL_CLK_DUMMY>;
+				clocks = <&clks IMX6UL_CLK_PWM6>,
+					 <&clks IMX6UL_CLK_PWM6>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm7: pwm@020f8000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020f8000 0x4000>;
 				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_DUMMY>,
-					 <&clks IMX6UL_CLK_DUMMY>;
+				clocks = <&clks IMX6UL_CLK_PWM7>,
+					 <&clks IMX6UL_CLK_PWM7>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm8: pwm@020fc000 {
 				compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
 				reg = <0x020fc000 0x4000>;
 				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX6UL_CLK_DUMMY>,
-					 <&clks IMX6UL_CLK_DUMMY>;
+				clocks = <&clks IMX6UL_CLK_PWM8>,
+					 <&clks IMX6UL_CLK_PWM8>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 		};
 
@@ -535,6 +726,9 @@
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -545,6 +739,9 @@
 				clocks = <&clks IMX6UL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy2>;
 				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
 				status = "disabled";
 			};
 
@@ -595,6 +792,18 @@
 				status = "disabled";
 			};
 
+			adc1: adc@02198000 {
+				compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_ADC1>;
+				num-channels = <2>;
+				clock-names = "adc";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							 <20000000>;
+				status = "disabled";
+			};
+
 			i2c1: i2c@021a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -625,6 +834,22 @@
 				status = "disabled";
 			};
 
+			mmdc: mmdc@021b0000 {
+				compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			lcdif: lcdif@021c8000 {
+				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+				reg = <0x021c8000 0x4000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
+					 <&clks IMX6UL_CLK_LCDIF_APB>,
+					 <&clks IMX6UL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
 			qspi: qspi@021e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
new file mode 100644
index 000000000000..48634519d13a
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -0,0 +1,286 @@
+/*
+ * Support for CompuLab CL-SOM-iMX7 System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-iMX7";
+	compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+	memory {
+		reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
+	};
+
+	reg_usb_otg1_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO			0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC			0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+			MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+			MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+			MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+			MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+			MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+			MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+			MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+			MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+			MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+			MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+			MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX7D_PAD_GPIO1_IO05__GPIO1_IO5		0x14 /* OTG PWREN */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
index a8d81497edb3..eeda78347619 100644
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/imx7d-pinfunc.h
@@ -15,6 +15,122 @@
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
 
+#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0                            0x0000 0x0030 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO00__PWM4_OUT                             0x0000 0x0030 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY                       0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B                         0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB                0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1                            0x0004 0x0034 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO01__PWM1_OUT                             0x0004 0x0034 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3                    0x0004 0x0034 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK                            0x0004 0x0034 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT                       0x0004 0x0034 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT                         0x0004 0x0034 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2                            0x0008 0x0038 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO02__PWM2_OUT                             0x0008 0x0038 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1                    0x0008 0x0038 0x0564 0x2 0x3
+#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK                            0x0008 0x0038 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1                            0x0008 0x0038 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT                         0x0008 0x0038 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID                          0x0008 0x0038 0x0734 0x7 0x3
+#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3                            0x000C 0x003C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO03__PWM3_OUT                             0x000C 0x003C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2                    0x000C 0x003C 0x0570 0x2 0x3
+#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK                            0x000C 0x003C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2                            0x000C 0x003C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT                         0x000C 0x003C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID                          0x000C 0x003C 0x0730 0x7 0x3
+#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4                            0x0010 0x0040 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC                          0x0010 0x0040 0x072C 0x1 0x1
+#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4                       0x0010 0x0040 0x0594 0x2 0x1
+#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B                          0x0010 0x0040 0x0710 0x3 0x4
+#define MX7D_PAD_GPIO1_IO04__I2C1_SCL                             0x0010 0x0040 0x05D4 0x4 0x2
+#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT                         0x0010 0x0040 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5                            0x0014 0x0044 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR                         0x0014 0x0044 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5                       0x0014 0x0044 0x0598 0x2 0x1
+#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B                          0x0014 0x0044 0x0710 0x3 0x5
+#define MX7D_PAD_GPIO1_IO05__I2C1_SDA                             0x0014 0x0044 0x05D8 0x4 0x2
+#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT                         0x0014 0x0044 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6                            0x0018 0x0048 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC                          0x0018 0x0048 0x0728 0x1 0x1
+#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6                       0x0018 0x0048 0x059C 0x2 0x1
+#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA                        0x0018 0x0048 0x0714 0x3 0x4
+#define MX7D_PAD_GPIO1_IO06__I2C2_SCL                             0x0018 0x0048 0x05DC 0x4 0x2
+#define MX7D_PAD_GPIO1_IO06__CCM_WAIT                             0x0018 0x0048 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO06__KPP_ROW4                             0x0018 0x0048 0x0624 0x6 0x1
+#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7                            0x001C 0x004C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR                         0x001C 0x004C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7                       0x001C 0x004C 0x05A0 0x2 0x1
+#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA                        0x001C 0x004C 0x0714 0x3 0x5
+#define MX7D_PAD_GPIO1_IO07__I2C2_SDA                             0x001C 0x004C 0x05E0 0x4 0x2
+#define MX7D_PAD_GPIO1_IO07__CCM_STOP                             0x001C 0x004C 0x0000 0x5 0x0
+#define MX7D_PAD_GPIO1_IO07__KPP_COL4                             0x001C 0x004C 0x0604 0x6 0x1
+#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8                            0x0014 0x026C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT                          0x0014 0x026C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B                         0x0014 0x026C 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX                         0x0014 0x026C 0x0704 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX                         0x0014 0x026C 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO08__I2C3_SCL                             0x0014 0x026C 0x05E4 0x4 0x0
+#define MX7D_PAD_GPIO1_IO08__KPP_COL5                             0x0014 0x026C 0x0608 0x6 0x0
+#define MX7D_PAD_GPIO1_IO08__PWM1_OUT                             0x0014 0x026C 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9                            0x0018 0x0270 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO09__SD1_LCTL                             0x0018 0x0270 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3                    0x0018 0x0270 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX                         0x0018 0x0270 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX                         0x0018 0x0270 0x0704 0x3 0x1
+#define MX7D_PAD_GPIO1_IO09__I2C3_SDA                             0x0018 0x0270 0x05E8 0x4 0x0
+#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY                       0x0018 0x0270 0x04F4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO09__KPP_ROW5                             0x0018 0x0270 0x0628 0x6 0x0
+#define MX7D_PAD_GPIO1_IO09__PWM2_OUT                             0x0018 0x0270 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10                           0x001C 0x0274 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO10__SD2_LCTL                             0x001C 0x0274 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO                           0x001C 0x0274 0x0568 0x2 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS                        0x001C 0x0274 0x0700 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS                        0x001C 0x0274 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO10__I2C4_SCL                             0x001C 0x0274 0x05EC 0x4 0x0
+#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA                       0x001C 0x0274 0x05A4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO10__KPP_COL6                             0x001C 0x0274 0x060C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO10__PWM3_OUT                             0x001C 0x0274 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11                           0x0020 0x0278 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO11__SD3_LCTL                             0x0020 0x0278 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO11__ENET1_MDC                            0x0020 0x0278 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS                        0x0020 0x0278 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS                        0x0020 0x0278 0x0700 0x3 0x1
+#define MX7D_PAD_GPIO1_IO11__I2C4_SDA                             0x0020 0x0278 0x05F0 0x4 0x0
+#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB                       0x0020 0x0278 0x05A8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO11__KPP_ROW6                             0x0020 0x0278 0x062C 0x6 0x0
+#define MX7D_PAD_GPIO1_IO11__PWM4_OUT                             0x0020 0x0278 0x0000 0x7 0x0
+#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12                           0x0024 0x027C 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT                          0x0024 0x027C 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1                    0x0024 0x027C 0x0564 0x2 0x0
+#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX                          0x0024 0x027C 0x04DC 0x3 0x0
+#define MX7D_PAD_GPIO1_IO12__CM4_NMI                              0x0024 0x027C 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1                         0x0024 0x027C 0x04E4 0x5 0x0
+#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5                           0x0024 0x027C 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID                          0x0024 0x027C 0x0734 0x7 0x0
+#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13                           0x0028 0x0280 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT                          0x0028 0x0280 0x0000 0x1 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2                    0x0028 0x0280 0x0570 0x2 0x0
+#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX                          0x0028 0x0280 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY                       0x0028 0x0280 0x04F4 0x4 0x1
+#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2                         0x0028 0x0280 0x04E8 0x5 0x0
+#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL                       0x0028 0x0280 0x0000 0x6 0x0
+#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID                          0x0028 0x0280 0x0730 0x7 0x0
+#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14                           0x002C 0x0284 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO14__SD3_CD_B                             0x002C 0x0284 0x0738 0x1 0x0
+#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO                           0x002C 0x0284 0x0574 0x2 0x0
+#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX                          0x002C 0x0284 0x04E0 0x3 0x0
+#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B                         0x002C 0x0284 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3                         0x002C 0x0284 0x04EC 0x5 0x0
+#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0                      0x002C 0x0284 0x06D8 0x6 0x0
+#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15                           0x0030 0x0288 0x0000 0x0 0x0
+#define MX7D_PAD_GPIO1_IO15__SD3_WP                               0x0030 0x0288 0x073C 0x1 0x0
+#define MX7D_PAD_GPIO1_IO15__ENET2_MDC                            0x0030 0x0288 0x0000 0x2 0x0
+#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX                          0x0030 0x0288 0x0000 0x3 0x0
+#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B                         0x0030 0x0288 0x0000 0x4 0x0
+#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4                         0x0030 0x0288 0x04F0 0x5 0x0
+#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1                      0x0030 0x0288 0x06DC 0x6 0x0
 #define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
 #define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
 #define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
@@ -453,7 +569,7 @@
 #define MX7D_PAD_LCD_DATA23__EIM_ADDR26                           0x0124 0x0394 0x0000 0x4 0x0
 #define MX7D_PAD_LCD_DATA23__GPIO3_IO28                           0x0124 0x0394 0x0000 0x5 0x0
 #define MX7D_PAD_LCD_DATA23__I2C4_SDA                             0x0124 0x0394 0x05F0 0x6 0x1
-#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x06F4 0x0 0x0
 #define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                      0x0128 0x0398 0x0000 0x0 0x0
 #define MX7D_PAD_UART1_RX_DATA__I2C1_SCL                          0x0128 0x0398 0x05D4 0x1 0x0
 #define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                    0x0128 0x0398 0x0000 0x2 0x0
@@ -469,7 +585,7 @@
 #define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT             0x012C 0x039C 0x0000 0x4 0x0
 #define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                         0x012C 0x039C 0x0000 0x5 0x0
 #define MX7D_PAD_UART1_TX_DATA__ENET1_MDC                         0x012C 0x039C 0x0000 0x6 0x0
-#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x06FC 0x0 0x2
 #define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                      0x0130 0x03A0 0x0000 0x0 0x0
 #define MX7D_PAD_UART2_RX_DATA__I2C2_SCL                          0x0130 0x03A0 0x05DC 0x1 0x0
 #define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                      0x0130 0x03A0 0x0000 0x2 0x0
@@ -501,7 +617,7 @@
 #define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT             0x013C 0x03AC 0x0000 0x4 0x0
 #define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                         0x013C 0x03AC 0x0000 0x5 0x0
 #define MX7D_PAD_UART3_TX_DATA__SD2_LCTL                          0x013C 0x03AC 0x0000 0x6 0x0
-#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0700 0x0 0x2
 #define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                       0x0140 0x03B0 0x0000 0x0 0x0
 #define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                         0x0140 0x03B0 0x0728 0x1 0x0
 #define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                       0x0140 0x03B0 0x0000 0x2 0x0
diff --git a/arch/arm/boot/dts/imx7d-sbc-imx7.dts b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
new file mode 100644
index 000000000000..f8a868552707
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sbc-imx7.dts
@@ -0,0 +1,42 @@
+/*
+ * Support for CompuLab SBC-iMX7 Single Board Computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Ilya Ledvich <ilya@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ */
+
+#include "imx7d-cl-som-imx7.dts"
+
+/ {
+	model = "CompuLab SBC-iMX7";
+	compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+	wakeup-source;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+			MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+			MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index fdd1d7c9a5cc..b267f79e3059 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -97,10 +97,59 @@
 	};
 };
 
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&adc2 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
 &cpu0 {
 	arm-supply = <&sw1a_reg>;
 };
 
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -231,21 +280,81 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-	enable-sdio-wakeup;
+	wakeup-source;
 	keep-power-in-suspend;
 	status = "okay";
 };
 
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
 	imx7d-sdb {
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX7D_PAD_GPIO1_IO10__ENET1_MDIO			0x3
+				MX7D_PAD_GPIO1_IO11__ENET1_MDC			0x3
+				MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC	0x1
+				MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0	0x1
+				MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1	0x1
+				MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2	0x1
+				MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3	0x1
+				MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL	0x1
+				MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC	0x1
+				MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x1
+				MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x1
+				MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2	0x1
+				MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3	0x1
+				MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x1
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC		0x1
+				MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0		0x1
+				MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1		0x1
+				MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2		0x1
+				MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3		0x1
+				MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL		0x1
+				MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC		0x1
+				MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0		0x1
+				MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1		0x1
+				MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2		0x1
+				MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3		0x1
+				MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL		0x1
+			>;
+		};
+
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
@@ -281,7 +390,6 @@
 			>;
 		};
 
-
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 6e444bb873f9..b5a50e0e7ff1 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -85,9 +85,7 @@
 				792000	975000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
-				 <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
-			clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
+			clocks = <&clks IMX7D_CLK_ARM>;
 		};
 
 		cpu1: cpu@1 {
@@ -121,6 +119,15 @@
 		clock-output-names = "osc";
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+	};
+
 	etr@30086000 {
 		compatible = "arm,coresight-tmc", "arm,primecell";
 		reg = <0x30086000 0x1000>;
@@ -446,6 +453,12 @@
 				status = "disabled";
 			};
 
+			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
 			gpt1: gpt@302d0000 {
 				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
 				reg = <0x302d0000 0x10000>;
@@ -570,6 +583,76 @@
 			};
 		};
 
+		aips2: aips-bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
 		aips3: aips-bus@30800000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
@@ -694,6 +777,77 @@
 				status = "disabled";
 			};
 
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@30b20000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b20000 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc2: usbmisc@30b20200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b20200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usbphynop1: usbphynop1 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_PHY1_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usbphynop2: usbphynop2 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_PHY2_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usbphynop3: usbphynop3 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+				clock-names = "main_clk";
+			};
+
 			usdhc1: usdhc@30b40000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b40000 0x10000>;
@@ -729,6 +883,42 @@
 				bus-width = <4>;
 				status = "disabled";
 			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
+
+			fec2: ethernet@30bf0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30bf0000 0x10000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 3807d4f46ef7..b82f0e6d9a63 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -57,7 +57,7 @@
 	};
 
 	fpga {
-		compatible = "arm,amba-bus", "simple-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
index 50c83c21d911..b7e99807f5c2 100644
--- a/arch/arm/boot/dts/k2e-evm.dts
+++ b/arch/arm/boot/dts/k2e-evm.dts
@@ -13,7 +13,7 @@
 #include "k2e.dtsi"
 
 / {
-	compatible =  "ti,k2e-evm","ti,keystone";
+	compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Edison EVM";
 
 	soc {
diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi
index b13b3c94e7fc..ac990f679725 100644
--- a/arch/arm/boot/dts/k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/k2e-netcp.dtsi
@@ -72,7 +72,17 @@ qmss: qmss@2a40000 {
 				qalloc-by-id;
 			};
 		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+		};
 	};
+
 	descriptor-regions {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -83,6 +93,19 @@ qmss: qmss@2a40000 {
 			link-index = <0x4000>;
 		};
 	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
 }; /* qmss */
 
 knav_dmas: knav_dmas@0 {
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 675fb8e492c6..1097dada56d2 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -9,6 +9,9 @@
  */
 
 / {
+	compatible = "ti,k2e", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison SoC";
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts
index 660ebf58d547..8161bf53271b 100644
--- a/arch/arm/boot/dts/k2hk-evm.dts
+++ b/arch/arm/boot/dts/k2hk-evm.dts
@@ -13,7 +13,7 @@
 #include "k2hk.dtsi"
 
 / {
-	compatible =  "ti,k2hk-evm","ti,keystone";
+	compatible =  "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
 
 	soc {
diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi
index 77a32c3c17e4..f86d6ddb832b 100644
--- a/arch/arm/boot/dts/k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/k2hk-netcp.dtsi
@@ -47,6 +47,7 @@ qmss: qmss@2a40000 {
 				    "region", "push", "pop";
 		};
 	};
+
 	queue-pools {
 		qpend {
 			qpend-0 {
@@ -88,7 +89,17 @@ qmss: qmss@2a40000 {
 				qalloc-by-id;
 			};
 		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+		};
 	};
+
 	descriptor-regions {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -99,6 +110,19 @@ qmss: qmss@2a40000 {
 			link-index = <0x4000>;
 		};
 	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
 }; /* qmss */
 
 knav_dmas: knav_dmas@0 {
diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi
index d0810a5f2968..ada4c7ac96e7 100644
--- a/arch/arm/boot/dts/k2hk.dtsi
+++ b/arch/arm/boot/dts/k2hk.dtsi
@@ -9,6 +9,9 @@
  */
 
 / {
+	compatible = "ti,k2hk", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts
index 9a69a6b55374..00861244d788 100644
--- a/arch/arm/boot/dts/k2l-evm.dts
+++ b/arch/arm/boot/dts/k2l-evm.dts
@@ -13,7 +13,7 @@
 #include "k2l.dtsi"
 
 / {
-	compatible =  "ti,k2l-evm","ti,keystone";
+	compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
 	model = "Texas Instruments Keystone 2 Lamarr EVM";
 
 	soc {
diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi
index 6b95284d11d4..5acbd0dcc2ab 100644
--- a/arch/arm/boot/dts/k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/k2l-netcp.dtsi
@@ -72,7 +72,16 @@ qmss: qmss@2a40000 {
 				qalloc-by-id;
 			};
 		};
+		accumulator {
+			acc-low-0 {
+				qrange = <480 32>;
+				accumulator = <0 47 16 2 50>;
+				interrupts = <0 226 0xf01>;
+				multi-queue;
+			};
+		};
 	};
+
 	descriptor-regions {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -83,6 +92,20 @@ qmss: qmss@2a40000 {
 			link-index = <0x4000>;
 		};
 	};
+
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			reg = <0x2a10000 0x1000    /*iram */
+			       0x2a0f000 0x100     /*reg*/
+			       0x2a0c000 0x3c8	   /*intd */
+			       0x2a20000 0x4000>;  /*cmd*/
+			id = <0>;
+		};
+	};
+
 }; /* qmss */
 
 knav_dmas: knav_dmas@0 {
@@ -114,7 +137,7 @@ netcp: netcp@26000000 {
 	/* NetCP address range */
 	ranges = <0 0x26000000 0x1000000>;
 
-	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	clocks = <&clkosr>, <&papllclk>, <&clkcpgmac>, <&chipclk12>;
 	dma-coherent;
 
 	ti,navigator-dmas = <&dma_gbe 0>,
diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi
index 49fd414f680c..4446da72b0ae 100644
--- a/arch/arm/boot/dts/k2l.dtsi
+++ b/arch/arm/boot/dts/k2l.dtsi
@@ -9,6 +9,9 @@
  */
 
 / {
+	compatible = "ti,k2l", "ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr SoC";
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
new file mode 100644
index 000000000000..5bfd9e7845f2
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree Source for K2G EVM
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+
+#include "keystone-k2g.dtsi"
+
+/ {
+	compatible =  "ti,k2g-evm", "ti,k2g", "ti,keystone";
+	model = "Texas Instruments K2G General Purpose EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000008 0x00000000 0x00000000 0x80000000>;
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
new file mode 100644
index 000000000000..7ff2796ae925
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Device Tree Source for K2G SOC
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,k2g","ti,keystone";
+	model = "Texas Instruments K2G SoC";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@02561000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x02561000 0x0 0x1000>,
+		      <0x0 0x02562000 0x0 0x2000>,
+		      <0x0 0x02564000 0x0 0x1000>,
+		      <0x0 0x02566000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+
+		uart0: serial@02530c00 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
+			clock-frequency = <200000000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 72816d65f7ec..3f272826f537 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -12,6 +12,7 @@
 #include "skeleton.dtsi"
 
 / {
+	compatible = "ti,keystone";
 	model = "Texas Instruments Keystone 2 SoC";
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -136,7 +137,7 @@
 		};
 
 		spi0: spi@21000400 {
-			compatible = "ti,dm6441-spi";
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
 			reg = <0x21000400 0x200>;
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <0>;
@@ -147,7 +148,7 @@
 		};
 
 		spi1: spi@21000600 {
-			compatible = "ti,dm6441-spi";
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
 			reg = <0x21000600 0x200>;
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <0>;
@@ -158,7 +159,7 @@
 		};
 
 		spi2: spi@21000800 {
-			compatible = "ti,dm6441-spi";
+			compatible = "ti,keystone-spi", "ti,dm6441-spi";
 			reg = <0x21000800 0x200>;
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts
index bf4143c6cb8f..b84af3da8c84 100644
--- a/arch/arm/boot/dts/kirkwood-ds112.dts
+++ b/arch/arm/boot/dts/kirkwood-ds112.dts
@@ -14,7 +14,7 @@
 #include "kirkwood-synology.dtsi"
 
 / {
-	model = "Synology DS111";
+	model = "Synology DS112";
 	compatible = "synology,ds111", "marvell,kirkwood";
 
 	memory {
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
new file mode 100644
index 000000000000..6548e68a20d0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-6282.dtsi
@@ -0,0 +1,192 @@
+/*
+ * Device Tree common file for kirkwood-6282 based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
+			 &gpio0 16 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		usb_power: regulator@1 {
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
new file mode 100644
index 000000000000..cf2e69f0d54f
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-duo-6281.dtsi
@@ -0,0 +1,186 @@
+/*
+ * Device Tree common file for kirkwood-6281 based 2-Bay Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-linkstation.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		function-button {
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power-on-switch {
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		power-auto-switch {
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		red-function-led {
+			label = "linkstation:red:function";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-function-led {
+			label = "linkstation:blue:function";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		usb_power: regulator@1 {
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power0: regulator@2 {
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
new file mode 100644
index 000000000000..6dc0df2969f0
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lsqvl.dts
@@ -0,0 +1,135 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-QVL
+ *
+ * Copyright (C) 2016, Mario Lange <mario_lange@gmx.net>
+ *
+ * Based on kirkwood-linkstation-lswvl.dts,
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-QVL";
+	compatible = "buffalo,lsqvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr2: pmx-led-hdderr2 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr3: pmx-led-hdderr3 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1
+			     &pmx_led_hdderr2
+			     &pmx_led_hdderr3>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr2-led {
+			label = "linkstation:red:hdderr2";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		red-hdderr3-led {
+			label = "linkstation:red:hdderr3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
new file mode 100644
index 000000000000..edcba5c44b05
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lsvl.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-VL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-VL";
+	compatible = "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
new file mode 100644
index 000000000000..4b6450186af5
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswsxl.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WSXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WSXL";
+	compatible = "buffalo,lswsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
new file mode 100644
index 000000000000..954ec1d5b6dc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswvl.dts
@@ -0,0 +1,112 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WVL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-6282.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WVL";
+	compatible = "buffalo,lswvl","marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd1: pmx-power-hdd1 {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
+
+		hdd_power1: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "HDD1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
new file mode 100644
index 000000000000..ecd5c12a805d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation-lswxl.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WXL
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "kirkwood-linkstation-duo-6281.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-WXL";
+	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_hdderr0: pmx-led-hdderr0 {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_led_hdderr1: pmx-led-hdderr1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_leds {
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue
+			     &pmx_led_hdderr0
+			     &pmx_led_hdderr1>;
+
+		red-hdderr0-led {
+			label = "linkstation:red:hdderr0";
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-hdderr1-led {
+			label = "linkstation:red:hdderr1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
+
+		gpio-fan,speed-map = <0 3
+				1500 2
+				3250 1
+				5000 0>;
+
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
new file mode 100644
index 000000000000..69061b6e987b
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linkstation.dtsi
@@ -0,0 +1,202 @@
+/*
+ * Device Tree common file for kirkwood based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd0: pmx-power-hdd0 {
+				marvell,function = "gpio";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function-red {
+				marvell,function = "gpio";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p40", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		function-button {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+		};
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd0 &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power0: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts
deleted file mode 100644
index 09eed3cea0af..000000000000
--- a/arch/arm/boot/dts/kirkwood-lswvl.dts
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-WVL/VL
- *
- * Copyright (C) 2015, rogershimizu@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WVL/VL";
-	compatible = "buffalo,lswvl", "buffalo,lsvl", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
-	memory { /* 256 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp9";
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp12";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp16";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp17";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp35";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp45";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p40", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x60000>;
-					label = "uboot";
-					read-only;
-				};
-
-				partition@60000 {
-					reg = <0x60000 0x10000>;
-					label = "dtb";
-					read-only;
-				};
-
-				partition@70000 {
-					reg = <0x70000 0x10000>;
-					label = "uboot_env";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_function &pmx_power_switch
-			     &pmx_power_auto_switch>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
-		};
-
-		button@2 {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
-		};
-
-		button@3 {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "lswvl:red:alarm";
-			gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
-		};
-
-		led@2 {
-			label = "lswvl:red:func";
-			gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
-		};
-
-		led@3 {
-			label = "lswvl:amber:info";
-			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
-		};
-
-		led@4 {
-			label = "lswvl:blue:func";
-			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
-		};
-
-		led@5 {
-			label = "lswvl:blue:power";
-			gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		led@6 {
-			label = "lswvl:red:hdderr0";
-			gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
-		};
-
-		led@7 {
-			label = "lswvl:red:hdderr1";
-			gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
-		gpios = <&gpio0 17 GPIO_ACTIVE_LOW
-			 &gpio0 16 GPIO_ACTIVE_LOW>;
-
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
-		alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		};
-		hdd_power0: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		};
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		device_type = "ethernet-phy";
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts
deleted file mode 100644
index f5db16a08597..000000000000
--- a/arch/arm/boot/dts/kirkwood-lswxl.dts
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * Device Tree file for Buffalo Linkstation LS-WXL/WSXL
- *
- * Copyright (C) 2015, rogershimizu@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Buffalo Linkstation LS-WXL/WSXL";
-	compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	memory { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_power_hdd0: pmx-power-hdd0 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-			pmx_power_hdd1: pmx-power-hdd1 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_usb_vbus: pmx-usb-vbus {
-				marvell,pins = "mpp37";
-				marvell,function = "gpio";
-			};
-			pmx_fan_high: pmx-fan-high {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-			pmx_fan_low: pmx-fan-low {
-				marvell,pins = "mpp48";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr0: pmx-led-hdderr0 {
-				marvell,pins = "mpp8";
-				marvell,function = "gpio";
-			};
-			pmx_led_hdderr1: pmx-led-hdderr1 {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_alarm: pmx-led-alarm {
-				marvell,pins = "mpp49";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_red: pmx-led-function-red {
-				marvell,pins = "mpp34";
-				marvell,function = "gpio";
-			};
-			pmx_led_function_blue: pmx-led-function-blue {
-				marvell,pins = "mpp36";
-				marvell,function = "gpio";
-			};
-			pmx_led_info: pmx-led-info {
-				marvell,pins = "mpp38";
-				marvell,function = "gpio";
-			};
-			pmx_led_power: pmx-led-power {
-				marvell,pins = "mpp39";
-				marvell,function = "gpio";
-			};
-			pmx_fan_lock: pmx-fan-lock {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_button_function: pmx-button-function {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-			pmx_power_switch: pmx-power-switch {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-			pmx_power_auto_switch: pmx-power-auto-switch {
-				marvell,pins = "mpp43";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-		spi@10600 {
-			status = "okay";
-
-			m25p40@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "st,m25p40", "jedec,spi-nor";
-				reg = <0>;
-				spi-max-frequency = <25000000>;
-				mode = <0>;
-
-				partition@0 {
-					reg = <0x0 0x60000>;
-					label = "uboot";
-					read-only;
-				};
-
-				partition@60000 {
-					reg = <0x60000 0x10000>;
-					label = "dtb";
-					read-only;
-				};
-
-				partition@70000 {
-					reg = <0x70000 0x10000>;
-					label = "uboot_env";
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_button_function &pmx_power_switch
-			     &pmx_power_auto_switch>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Function Button";
-			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
-		};
-
-		button@2 {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
-		};
-
-		button@3 {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
-			gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
-			     &pmx_led_info &pmx_led_power
-			     &pmx_led_function_blue
-			     &pmx_led_hdderr0
-			     &pmx_led_hdderr1>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "lswxl:blue:func";
-			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
-		};
-
-		led@2 {
-			label = "lswxl:red:alarm";
-			gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
-		};
-
-		led@3 {
-			label = "lswxl:amber:info";
-			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-		};
-
-		led@4 {
-			label = "lswxl:blue:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-		};
-
-		led@5 {
-			label = "lswxl:red:func";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		led@6 {
-			label = "lswxl:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		led@7 {
-			label = "lswxl:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
-		gpios = <&gpio0 47 GPIO_ACTIVE_LOW
-			 &gpio0 48 GPIO_ACTIVE_LOW>;
-
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
-		alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
-	};
-
-	restart_poweroff {
-		compatible = "restart-poweroff";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
-		};
-		hdd_power0: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD0 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-		};
-		hdd_power1: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "HDD1 Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy1: ethernet-phy@8 {
-		device_type = "ethernet-phy";
-		reg = <8>;
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	ethernet1-port@0 {
-		phy-handle = <&ethphy1>;
-	};
-};
diff --git a/arch/arm/boot/dts/kirkwood-nsa325.dts b/arch/arm/boot/dts/kirkwood-nsa325.dts
new file mode 100644
index 000000000000..bc4ec9332387
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
@@ -0,0 +1,238 @@
+/* Device tree file for the Zyxel NSA 325 NAS box.
+ *
+ * Copyright (c) 2015, Hans Ulli Kroll <ulli.kroll@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann
+ */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "ZyXEL NSA325";
+	compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Buzzer needs to be switched at around 1kHz so is
+			 * not compatible with the gpio-beeper driver.
+			 */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_sata1: pmx-pwr-sata1 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		/* This board uses the pcf8563 RTC instead of the SoC RTC */
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_pwr_sata1>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa325:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa325:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa325:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa325:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa325:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa325:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa325:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa325:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa325:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+	};
+
+
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts
index 887b9c1fee43..96ff59d68f44 100644
--- a/arch/arm/boot/dts/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts
@@ -20,6 +20,9 @@
 	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
 	ocp@f1000000 {
+		audio-controller@a0000 {
+			status = "okay";
+		};
 		i2c@11000 {
 			status = "okay";
 			clock-frequency = <400000>;
@@ -27,6 +30,7 @@
 			cs42l51: cs42l51@4a {
 				compatible = "cirrus,cs42l51";
 				reg = <0x4a>;
+				#sound-dai-cells = <0>;
 			};
 		};
 	};
@@ -37,7 +41,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0>;
+			sound-dai = <&audio0 0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi
index d3330dadf7ed..24f1d30970a0 100644
--- a/arch/arm/boot/dts/kirkwood-openrd.dtsi
+++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi
@@ -40,7 +40,7 @@
 			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
 			pinctrl-names = "default";
 
-			pmx_select28: pmx-select-uart-sd {
+			pmx_select28: pmx-select-rs232-rs485 {
 				marvell,pins = "mpp28";
 				marvell,function = "gpio";
 			};
@@ -48,7 +48,7 @@
 				marvell,pins = "mpp29";
 				marvell,function = "gpio";
 			};
-			pmx_select34: pmx-select-rs232-rs484 {
+			pmx_select34: pmx-select-uart-sd {
 				marvell,pins = "mpp34";
 				marvell,function = "gpio";
 			};
@@ -65,6 +65,43 @@
 			status = "okay";
 			cd-gpios = <&gpio0 29 9>;
 		};
+		gpio@10100 {
+			p28 {
+				gpio-hog;
+				gpios = <28 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelRS232or485 selects between RS-232 or RS-485
+				 * mode for the second UART.
+				 *
+				 * Low: RS-232
+				 * High: RS-485
+				 *
+				 * To use the second UART, you need to change also
+				 * the SelUARTorSD.
+				 */
+				output-low;
+				line-name = "SelRS232or485";
+			};
+		};
+		gpio@10140 {
+			p2 {
+				gpio-hog;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+				/*
+				 * SelUARTorSD selects between the second UART
+				 * (serial@12100) and SD (mvsdio@90000).
+				 *
+				 * Low: UART
+				 * High: SD
+				 *
+				 * When changing this line make sure the newly
+				 * selected device node is enabled and the
+				 * previously selected device node is disabled.
+				 */
+				output-high; /* Select SD by default */
+				line-name = "SelUARTorSD";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
new file mode 100644
index 000000000000..8082d64266a3
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
@@ -0,0 +1,179 @@
+/*
+ * kirkwood-pogoplug-series-4.dts - Device tree file for PogoPlug Series 4
+ * inspired by the board files made by Kevin Mihelich for ArchLinux,
+ * and their DTS file.
+ *
+ * Copyright (C) 2015 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Cloud Engines PogoPlug Series 4";
+	compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chosen {
+		stdout-path = "uart0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_eject>;
+		pinctrl-names = "default";
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "Eject Button";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "pogoplugv4:green:health";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		fault {
+			label = "pogoplugv4:red:fault";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_sata0: pmx-sata0 {
+		marvell,pins = "mpp21";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1: pmx-sata1 {
+		marvell,pins = "mpp20";
+		marvell,function = "sata1";
+	};
+
+	pmx_sdio_cd: pmx-sdio-cd {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	pmx_sdio_wp: pmx-sdio-wp {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_eject: pmx-button-eject {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp22";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_red: pmx-led-red {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+/*
+ * This PCIE controller has a USB 3.0 XHCI controller at 1,0
+ */
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	nr-ports = <1>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+	pinctrl-names = "default";
+	cd-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+};
+
+&nand {
+	/* 128 MiB of NAND flash */
+	chip-delay = <40>;
+	status = "okay";
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x00000000 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "uImage";
+			reg = <0x00200000 0x300000>;
+		};
+
+		partition@500000 {
+			label = "uImage2";
+			reg = <0x00500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "failsafe";
+			reg = <0x00800000 0x800000>;
+		};
+
+		partition@1000000 {
+			label = "root";
+			reg = <0x01000000 0x7000000>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index c56ab6bbfe3c..0e46560551f4 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -40,7 +40,7 @@
 		};
 		poweroff@12100 {
 			compatible = "qnap,power-off";
-			reg = <0x12000 0x100>;
+			reg = <0x12100 0x100>;
 			clocks = <&gate_clk 7>;
 		};
 		spi@10600 {
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 464f09a1a4a5..7445a15e259d 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -40,16 +40,6 @@
 		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
 		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
 
-		cesa: crypto@0301 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
-			      <MBUS_ID(0x03, 0x01) 0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <22>;
-			clocks = <&gate_clk 17>;
-			status = "okay";
-		};
-
 		nand: nand@012f {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -65,6 +55,14 @@
 			pinctrl-names = "default";
 			status = "disabled";
 		};
+
+		crypto_sram: sa-sram@0301 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
+			clocks = <&gate_clk 17>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
 	};
 
 	ocp@f1000000 {
@@ -252,6 +250,17 @@
 			status = "okay";
 		};
 
+		cesa: crypto@30000 {
+			compatible = "marvell,kirkwood-crypto";
+			reg = <0x30000 0x10000>;
+			reg-names = "regs";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			marvell,crypto-srams = <&crypto_sram>;
+			marvell,crypto-sram-size = <0x800>;
+			status = "okay";
+		};
+
 		usb0: ehci@50000 {
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
@@ -372,7 +381,7 @@
 
 		audio0: audio-controller@a0000 {
 			compatible = "marvell,kirkwood-audio";
-			#sound-dai-cells = <0>;
+			#sound-dai-cells = <1>;
 			reg = <0xa0000 0x2210>;
 			interrupts = <24>;
 			clocks = <&gate_clk 9>;
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
new file mode 100644
index 000000000000..da8598402ab8
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -0,0 +1,268 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
+	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		sysboot2 {
+			label = "gpio3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* gpio_111 / uP_GPIO_3 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins &led_pins_wkup>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;	/* gpio133 */
+			linux,default-trigger = "cpu0";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;	/* gpio11 */
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+&gpmc {
+	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;		/* gpio_152 */
+		reg = <1 0 0xff>;
+	};
+};
+
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&video_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	video_reg: video_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "28";
+		status = "okay";
+		/* default-on; */
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_pin>;
+		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <2>;
+			vsync-len = <11>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&twl_pwm 0 5000000>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
+	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_xclkb.gpio_111 / uP_GPIO_3*/
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x215e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* sdmmc2_dat1.gpio_133 / uP_GPIO_0 */
+		>;
+	};
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 sdmmc1_wp*/
+		>;
+	};
+
+	lcd_enable_pin: pinmux_lcd_enable_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	led_pins_wkup: pinmux_led_pins_wkup {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 / uP_GPIO_1 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
+		>;
+	};
+
+	mmc1_cd: pinmux_mmc1_cd {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
+		>;
+	};
+};
+
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
new file mode 100644
index 000000000000..365f39ff58bb
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -0,0 +1,265 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 3 0>;   /* gpio_3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,cycle2cycle-delay-ns = <50>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
+
+		x-loader@0 {
+			label = "x-loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "u-boot-env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "fs";
+			reg = <0x680000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc3 {
+	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	pinctrl-0 = <&mmc3_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1273";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
+
+	mmc3_pins: pinmux_mm3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+			OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs2.sdmmc_clk */
+		>;
+	};
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)       /* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_reset_pin>;
+	hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_2_pins>;
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)            /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)            /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)    /* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 5b0430041ec6..015f795a8d19 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -11,7 +11,7 @@
 #include "omap-gpmc-smsc9221.dtsi"
 
 / {
-	model = "LogicPD Zoom DM3730 Torpedo Development Kit";
+	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
 	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
 
 	gpio_keys {
@@ -23,31 +23,37 @@
 			label = "sysboot2";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;	/* gpio2 */
 			linux,code = <BTN_0>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		sysboot5 {
 			label = "sysboot5";
 			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;	/* gpio7 */
 			linux,code = <BTN_1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		gpio1 {
 			label = "gpio1";
 			gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;	/* gpio181 */
 			linux,code = <BTN_2>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		gpio2 {
 			label = "gpio2";
 			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;	/* gpio178 */
 			linux,code = <BTN_3>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3logic";
+		ti,mcbsp = <&mcbsp2>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -65,6 +71,29 @@
 			linux,default-trigger = "none";
 		};
 	};
+
+	pwm10: dmtimer-pwm@10 {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer10>;
+		#pwm-cells = <3>;
+	};
+
+};
+
+&vaux1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+	status = "okay";
 };
 
 &charger {
@@ -73,7 +102,8 @@
 };
 
 &gpmc {
-	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
+		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
@@ -84,6 +114,80 @@
 	};
 };
 
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	vdds_dsi-supply = <&vpll2>;
+	vdda_video-supply = <&video_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins1>;
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	video_reg: video_reg {
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pwr_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "15";
+		status = "okay";
+		/* default-on; */
+		pinctrl-names = "default";
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <3>;
+			vfront-porch = <4>;
+			vsync-len = <11>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+	};
+};
+
 &mmc1 {
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
@@ -102,6 +206,12 @@
 		>;
 	};
 
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)       /* gpmc_ncs5.gpt_10_pwm_evt */
+		>;
+	};
+
 	led_pins: pinmux_led_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
@@ -119,6 +229,71 @@
 			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4)	/* mcbsp4_dr.gpio_153 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_dx.gpio_154 */
+		>;
+	};
+
+	isp_pins: pinmux_isp_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0)   /* cam_hs.cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0)   /* cam_vs.cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
+
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0)   /* cam_d6.cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0)   /* cam_d7.cam_d7 */
+		>;
+	};
+
+	panel_pwr_pins: pinmux_panel_pwr_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* mcbsp4_fs.gpio_155 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {
@@ -142,12 +317,84 @@
 	};
 };
 
+&i2c2 {
+	mt9p031@48 {
+		compatible = "aptina,mt9p031";
+		reg = <0x48>;
+		clocks = <&isp 0>;
+		vaa-supply = <&vaux4>;
+		vdd-supply = <&vaux4>;
+		vdd_io-supply = <&vaux4>;
+		port {
+			mt9p031_out: endpoint {
+				input-clock-frequency = <24000000>;
+				pixel-clock-frequency = <72000000>;
+				remote-endpoint = <&ccdc_ep>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		vio-supply = <&vaux1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mcspi1 {
+	at25@0 {
+		compatible = "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+
+		pagesize = <64>;
+		size = <32768>;
+		address-width = <16>;
+	};
+};
+
+&isp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&isp_pins>;
+	ports {
+		port@0 {
+			reg = <0>;
+			ccdc_ep: endpoint {
+				remote-endpoint = <&mt9p031_out>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
 &uart1 {
 	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
 };
 
 /* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
 &usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
 	phys = <&usb2_phy>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 36387b11451d..5e9a13c0eaf7 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -35,11 +35,15 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
-		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,sync-clk-ps = <0>;
@@ -96,6 +100,24 @@
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	at24@50 {
+		compatible = "at24,24c02";
+		readonly;
+		reg = <0x50>;
 	};
 };
 
@@ -122,6 +144,7 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
 	};
 };
 
@@ -136,6 +159,59 @@
 			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
 		>;
 	};
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)        /* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)        /* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)        /* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)       /* mcbsp2_dx */
+		>;
+	};
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* GPIO_162,BT_EN */
+		>;
+	};
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)        /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)       /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
 };
 
 &omap3_pmx_core2 {
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 2c569a6ddc9a..053a1f54f4bb 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -68,6 +68,46 @@
 	};
 
 	soc {
+		sct_pwm: pwm@40000000 {
+			compatible = "nxp,lpc1850-sct-pwm";
+			reg = <0x40000000 0x1000>;
+			clocks =<&ccu1 CLK_CPU_SCT>;
+			clock-names = "pwm";
+			resets = <&rgu 37>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		dmac: dma-controller@40002000 {
+			compatible = "arm,pl080", "arm,primecell";
+			arm,primecell-periphid = <0x00041080>;
+			reg = <0x40002000 0x1000>;
+			interrupts = <2>;
+			clocks = <&ccu1 CLK_CPU_DMA>;
+			clock-names = "apb_pclk";
+			resets = <&rgu 19>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb1;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+		};
+
+		spifi: flash-controller@40003000 {
+			compatible = "nxp,lpc1773-spifi";
+			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+			reg-names = "spifi", "flash";
+			interrupts = <30>;
+			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+			clock-names = "spifi", "reg";
+			resets = <&rgu 53>;
+			status = "disabled";
+		};
+
 		mmcsd: mmcsd@40004000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x40004000 0x1000>;
@@ -75,6 +115,7 @@
 			num-slots = <1>;
 			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
 			clock-names = "ciu", "biu";
+			resets = <&rgu 20>;
 			status = "disabled";
 		};
 
@@ -83,6 +124,7 @@
 			reg = <0x40006100 0x100>;
 			interrupts = <8>;
 			clocks = <&ccu1 CLK_CPU_USB0>;
+			resets = <&rgu 17>;
 			phys = <&usb0_otg_phy>;
 			phy-names = "usb";
 			has-transaction-translator;
@@ -94,6 +136,7 @@
 			reg = <0x40007100 0x100>;
 			interrupts = <9>;
 			clocks = <&ccu1 CLK_CPU_USB1>;
+			resets = <&rgu 18>;
 			status = "disabled";
 		};
 
@@ -102,6 +145,7 @@
 			reg = <0x40005000 0x1000>;
 			clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
 			clock-names = "mpmcclk", "apb_pclk";
+			resets = <&rgu 21>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			ranges = <0 0 0x1c000000 0x1000000
@@ -118,6 +162,18 @@
 			interrupt-names = "combined";
 			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
 			clock-names = "clcdclk", "apb_pclk";
+			resets = <&rgu 16>;
+			status = "disabled";
+		};
+
+		eeprom: eeprom@4000e000 {
+			compatible = "nxp,lpc1857-eeprom";
+			reg = <0x4000e000 0x1000>, <0x20040000 0x4000>;
+			reg-names = "reg", "mem";
+			clocks = <&ccu1 CLK_CPU_EEPROM>;
+			clock-names = "eeprom";
+			resets = <&rgu 27>;
+			interrupts = <4>;
 			status = "disabled";
 		};
 
@@ -128,6 +184,8 @@
 			interrupt-names	= "macirq";
 			clocks = <&ccu1 CLK_CPU_ETHERNET>;
 			clock-names = "stmmaceth";
+			resets = <&rgu 22>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -135,12 +193,20 @@
 			compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
 			reg = <0x40043000 0x1000>;
 			clocks = <&ccu1 CLK_CPU_CREG>;
+			resets = <&rgu 5>;
 
 			usb0_otg_phy: phy@004 {
 				compatible = "nxp,lpc1850-usb-otg-phy";
 				clocks = <&ccu1 CLK_USB0>;
 				#phy-cells = <0>;
 			};
+
+			dmamux: dma-mux@11c {
+				compatible = "nxp,lpc1850-dmamux";
+				#dma-cells = <3>;
+				dma-requests = <64>;
+				dma-masters = <&dmac>;
+			};
 		};
 
 		cgu: clock-controller@40050000 {
@@ -178,6 +244,22 @@
 				      "base_ssp0_clk",  "base_sdio_clk";
 		};
 
+		rgu: reset-controller@40053000 {
+			compatible = "nxp,lpc1850-rgu";
+			reg = <0x40053000 0x1000>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "delay", "reg";
+			#reset-cells = <1>;
+		};
+
+		watchdog@40080000 {
+			compatible = "nxp,lpc1850-wwdt";
+			reg = <0x40080000 0x24>;
+			interrupts = <49>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+			clock-names = "wdtclk", "reg";
+		};
+
 		uart0: serial@40081000 {
 			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x40081000 0x1000>;
@@ -185,6 +267,12 @@
 			interrupts = <24>;
 			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 44>;
+			dmas = <&dmamux  1 1 2
+				&dmamux  2 1 2
+				&dmamux 11 2 2
+				&dmamux 12 2 2>;
+			dma-names = "tx", "rx", "tx", "rx";
 			status = "disabled";
 		};
 
@@ -195,6 +283,10 @@
 			interrupts = <25>;
 			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 45>;
+			dmas = <&dmamux 3 1 2
+				&dmamux 4 1 2>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -204,6 +296,10 @@
 			interrupts = <22>;
 			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
 			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 50>;
+			dmas = <&dmamux  9 0 2
+				&dmamux 10 0 2>;
+			dma-names = "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -215,6 +311,7 @@
 			interrupts = <12>;
 			clocks = <&ccu1 CLK_CPU_TIMER0>;
 			clock-names = "timerclk";
+			resets = <&rgu 32>;
 		};
 
 		timer1: timer@40085000 {
@@ -223,6 +320,7 @@
 			interrupts = <13>;
 			clocks = <&ccu1 CLK_CPU_TIMER1>;
 			clock-names = "timerclk";
+			resets = <&rgu 33>;
 		};
 
 		pinctrl: pinctrl@40086000 {
@@ -231,11 +329,23 @@
 			clocks = <&ccu1 CLK_CPU_SCU>;
 		};
 
+		i2c0: i2c@400a1000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400a1000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu1 CLK_APB1_I2C0>;
+			resets = <&rgu 48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		can1: can@400a4000 {
 			compatible = "bosch,c_can";
 			reg = <0x400a4000 0x1000>;
 			interrupts = <43>;
 			clocks = <&ccu1 CLK_APB1_CAN1>;
+			resets = <&rgu 54>;
 			status = "disabled";
 		};
 
@@ -246,6 +356,10 @@
 			interrupts = <26>;
 			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 46>;
+			dmas = <&dmamux 5 1 2
+				&dmamux 6 1 2>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -256,6 +370,12 @@
 			interrupts = <27>;
 			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 47>;
+			dmas = <&dmamux  7 1 2
+				&dmamux  8 1 2
+				&dmamux 13 3 2
+				&dmamux 14 3 2>;
+			dma-names = "tx", "rx", "rx", "tx";
 			status = "disabled";
 		};
 
@@ -265,6 +385,7 @@
 			interrupts = <14>;
 			clocks = <&ccu1 CLK_CPU_TIMER2>;
 			clock-names = "timerclk";
+			resets = <&rgu 34>;
 		};
 
 		timer3: timer@400c4000 {
@@ -273,6 +394,7 @@
 			interrupts = <15>;
 			clocks = <&ccu1 CLK_CPU_TIMER3>;
 			clock-names = "timerclk";
+			resets = <&rgu 35>;
 		};
 
 		ssp1: spi@400c5000 {
@@ -281,6 +403,28 @@
 			interrupts = <23>;
 			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
 			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 51>;
+			dmas = <&dmamux 11 2 2
+				&dmamux 12 2 2
+				&dmamux  3 3 2
+				&dmamux  4 3 2
+				&dmamux  5 2 2
+				&dmamux  6 2 2
+				&dmamux 13 2 2
+				&dmamux 14 2 2>;
+			dma-names = "rx", "tx", "tx", "rx",
+				    "tx", "rx", "rx", "tx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@400e0000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400e0000 0x1000>;
+			interrupts = <19>;
+			clocks = <&ccu1 CLK_APB3_I2C1>;
+			resets = <&rgu 49>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -291,6 +435,7 @@
 			reg = <0x400e2000 0x1000>;
 			interrupts = <51>;
 			clocks = <&ccu1 CLK_APB3_CAN0>;
+			resets = <&rgu 55>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index 3abebb75fc57..c58d8da9ea2a 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -11,19 +11,39 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/lpc32xx-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "nxp,lpc3220";
 	interrupt-parent = <&mic>;
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		xtal_32k: xtal_32k {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "xtal_32k";
+		};
+
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <13000000>;
+			clock-output-names = "xtal";
 		};
 	};
 
@@ -31,7 +51,8 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		ranges = <0x20000000 0x20000000 0x30000000>;
+		ranges = <0x20000000 0x20000000 0x30000000>,
+			 <0xe0000000 0xe0000000 0x04000000>;
 
 		/*
 		 * Enable either SLC or MLC
@@ -39,50 +60,100 @@
 		slc: flash@20020000 {
 			compatible = "nxp,lpc3220-slc";
 			reg = <0x20020000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_SLC>;
 			status = "disabled";
 		};
 
 		mlc: flash@200a8000 {
 			compatible = "nxp,lpc3220-mlc";
 			reg = <0x200a8000 0x11000>;
-			interrupts = <11 0>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MLC>;
 			status = "disabled";
 		};
 
-		dma@31000000 {
+		dma: dma@31000000 {
 			compatible = "arm,pl080", "arm,primecell";
 			reg = <0x31000000 0x1000>;
-			interrupts = <0x1c 0>;
+			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_DMA>;
+			clock-names = "apb_pclk";
 		};
 
-		/*
-		 * Enable either ohci or usbd (gadget)!
-		 */
-		ohci@31020000 {
-			compatible = "nxp,ohci-nxp", "usb-ohci";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3b 0>;
-			status = "disabled";
-		};
+		usb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x31020000 0x00001000>;
 
-		usbd@31020000 {
-			compatible = "nxp,lpc3220-udc";
-			reg = <0x31020000 0x300>;
-			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
-			status = "disabled";
+			/*
+			 * Enable either ohci or usbd (gadget)!
+			 */
+			ohci: ohci@0 {
+				compatible = "nxp,ohci-nxp", "usb-ohci";
+				reg = <0x0 0x300>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_HOST>;
+				status = "disabled";
+			};
+
+			usbd: usbd@0 {
+				compatible = "nxp,lpc3220-udc";
+				reg = <0x0 0x300>;
+				interrupts = <61 IRQ_TYPE_LEVEL_HIGH>,
+					     <62 IRQ_TYPE_LEVEL_HIGH>,
+					     <60 IRQ_TYPE_LEVEL_HIGH>,
+					     <58 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>;
+				status = "disabled";
+			};
+
+			i2cusb: i2c@300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x300 0x100>;
+				interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&usbclk LPC32XX_USB_CLK_I2C>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			usbclk: clock-controller@f00 {
+				compatible = "nxp,lpc3220-usb-clk";
+				reg = <0xf00 0x100>;
+				#clock-cells = <1>;
+			};
 		};
 
-		clcd@31040000 {
+		clcd: clcd@31040000 {
 			compatible = "arm,pl110", "arm,primecell";
 			reg = <0x31040000 0x1000>;
-			interrupts = <0x0e 0>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_LCD>;
+			clock-names = "apb_pclk";
 			status = "disabled";
 		};
 
 		mac: ethernet@31060000 {
 			compatible = "nxp,lpc-eth";
 			reg = <0x31060000 0x1000>;
-			interrupts = <0x1d 0>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk LPC32XX_CLK_MAC>;
+		};
+
+		emc: memory-controller@31080000 {
+			compatible = "arm,pl175", "arm,primecell";
+			reg = <0x31080000 0x1000>;
+			clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>;
+			clock-names = "mpmcclk", "apb_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe0000000 0x01000000>,
+				 <1 0xe1000000 0x01000000>,
+				 <2 0xe2000000 0x01000000>,
+				 <3 0xe3000000 0x01000000>;
+			status = "disabled";
 		};
 
 		apb {
@@ -94,7 +165,9 @@
 			ssp0: ssp@20084000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x20084000 0x1000>;
-				interrupts = <0x14 0>;
+				interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP0>;
+				clock-names = "apb_pclk";
 			};
 
 			spi1: spi@20088000 {
@@ -105,7 +178,9 @@
 			ssp1: ssp@2008c000 {
 				compatible = "arm,pl022", "arm,primecell";
 				reg = <0x2008c000 0x1000>;
-				interrupts = <0x15 0>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SSP1>;
+				clock-names = "apb_pclk";
 			};
 
 			spi2: spi@20090000 {
@@ -118,10 +193,13 @@
 				reg = <0x20094000 0x1000>;
 			};
 
-			sd@20098000 {
+			sd: sd@20098000 {
 				compatible = "arm,pl18x", "arm,primecell";
 				reg = <0x20098000 0x1000>;
-				interrupts = <0x0f 0>, <0x0d 0>;
+				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_SD>;
+				clock-names = "apb_pclk";
 				status = "disabled";
 			};
 
@@ -135,55 +213,57 @@
 				/* actually, ns16550a w/ 64 byte fifos! */
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40090000 0x1000>;
-				interrupts = <9 0>;
-				clock-frequency = <13000000>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART5>;
 				status = "disabled";
 			};
 
 			uart3: serial@40080000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40080000 0x1000>;
-				interrupts = <7 0>;
-				clock-frequency = <13000000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART3>;
 				status = "disabled";
 			};
 
 			uart4: serial@40088000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40088000 0x1000>;
-				interrupts = <8 0>;
-				clock-frequency = <13000000>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART4>;
 				status = "disabled";
 			};
 
 			uart6: serial@40098000 {
 				compatible = "nxp,lpc3220-uart";
 				reg = <0x40098000 0x1000>;
-				interrupts = <10 0>;
-				clock-frequency = <13000000>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 				reg-shift = <2>;
+				clocks = <&clk LPC32XX_CLK_UART6>;
 				status = "disabled";
 			};
 
 			i2c1: i2c@400A0000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A0000 0x100>;
-				interrupts = <0x33 0>;
+				interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
+				clocks = <&clk LPC32XX_CLK_I2C1>;
 			};
 
 			i2c2: i2c@400A8000 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x400A8000 0x100>;
-				interrupts = <0x32 0>;
+				interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pnx,timeout = <0x64>;
+				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};
 
 			mpwm: mpwm@400E8000 {
@@ -192,15 +272,6 @@
 				status = "disabled";
 				#pwm-cells = <2>;
 			};
-
-			i2cusb: i2c@31020300 {
-				compatible = "nxp,pnx-i2c";
-				reg = <0x31020300 0x100>;
-				interrupts = <0x3f 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pnx,timeout = <0x64>;
-			};
 		};
 
 		fab {
@@ -209,6 +280,23 @@
 			compatible = "simple-bus";
 			ranges = <0x20000000 0x20000000 0x30000000>;
 
+			/* System Control Block */
+			scb {
+				compatible = "simple-bus";
+				ranges = <0x0 0x040004000 0x00001000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				clk: clock-controller@0 {
+					compatible = "nxp,lpc3220-clk";
+					reg = <0x00 0x114>;
+					#clock-cells = <1>;
+
+					clocks = <&xtal_32k>, <&xtal>;
+					clock-names = "xtal_32k", "xtal";
+				};
+			};
+
 			/*
 			 * MIC Interrupt controller includes:
 			 *   MIC @40008000
@@ -225,28 +313,29 @@
 			uart1: serial@40014000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x40014000 0x1000>;
-				interrupts = <26 0>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			uart2: serial@40018000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x40018000 0x1000>;
-				interrupts = <25 0>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			uart7: serial@4001c000 {
 				compatible = "nxp,lpc3220-hsuart";
 				reg = <0x4001c000 0x1000>;
-				interrupts = <24 0>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
-			rtc@40024000 {
+			rtc: rtc@40024000 {
 				compatible = "nxp,lpc3220-rtc";
 				reg = <0x40024000 0x1000>;
-				interrupts = <0x34 0>;
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_RTC>;
 			};
 
 			gpio: gpio@40028000 {
@@ -256,9 +345,36 @@
 				#gpio-cells = <3>; /* bank, pin, flags */
 			};
 
-			watchdog@4003C000 {
+			timer4: timer@4002C000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4002C000 0x1000>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER4>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			timer5: timer@40030000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40030000 0x1000>;
+				interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER5>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			watchdog: watchdog@4003C000 {
 				compatible = "nxp,pnx4008-wdt";
 				reg = <0x4003C000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_WDOG>;
+			};
+
+			timer0: timer@40044000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40044000 0x1000>;
+				clocks = <&clk LPC32XX_CLK_TIMER0>;
+				clock-names = "timerclk";
+				interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 			};
 
 			/*
@@ -268,30 +384,66 @@
 			 * them
 			 */
 
-			adc@40048000 {
+			adc: adc@40048000 {
 				compatible = "nxp,lpc3220-adc";
 				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};
 
-			tsc@40048000 {
+			tsc: tsc@40048000 {
 				compatible = "nxp,lpc3220-tsc";
 				reg = <0x40048000 0x1000>;
-				interrupts = <0x27 0>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk LPC32XX_CLK_ADC>;
 				status = "disabled";
 			};
 
-			key@40050000 {
+			timer1: timer@4004C000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x4004C000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER1>;
+				clock-names = "timerclk";
+			};
+
+			key: key@40050000 {
 				compatible = "nxp,lpc3220-key";
 				reg = <0x40050000 0x1000>;
-				interrupts = <54 0>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer2: timer@40058000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40058000 0x1000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER2>;
+				clock-names = "timerclk";
+				status = "disabled";
+			};
+
+			pwm1: pwm@4005C000 {
+				compatible = "nxp,lpc3220-pwm";
+				reg = <0x4005C000 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM1>;
 				status = "disabled";
 			};
 
-			pwm: pwm@4005C000 {
+			pwm2: pwm@4005C004 {
 				compatible = "nxp,lpc3220-pwm";
-				reg = <0x4005C000 0x8>;
+				reg = <0x4005C004 0x4>;
+				clocks = <&clk LPC32XX_CLK_PWM2>;
+				status = "disabled";
+			};
+
+			timer3: timer@40060000 {
+				compatible = "nxp,lpc3220-timer";
+				reg = <0x40060000 0x1000>;
+				interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk LPC32XX_CLK_TIMER3>;
+				clock-names = "timerclk";
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/lpc4337-ciaa.dts b/arch/arm/boot/dts/lpc4337-ciaa.dts
index 5f500c1ad89c..5cfadb06c8df 100644
--- a/arch/arm/boot/dts/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/lpc4337-ciaa.dts
@@ -99,6 +99,14 @@
 		};
 	};
 
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
 	ssp_pins: ssp-pins {
 		ssp1_cs {
 			pins = "p6_7";
@@ -159,6 +167,28 @@
 	clock-frequency = <50000000>;
 };
 
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "microchip,24c512";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "microchip,24c02";
+		reg = <0x51>;
+	};
+
+	eeprom@54 {
+		compatible = "microchip,24c512";
+		reg = <0x54>;
+	};
+};
+
 &mac {
 	status = "okay";
 	phy-mode = "rmii";
@@ -166,6 +196,10 @@
 	pinctrl-0 = <&enet_rmii_pins>;
 };
 
+&sct_pwm {
+	status = "okay";
+};
+
 &ssp1 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 32bc7ff4eb2a..022d495432c1 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -15,6 +15,9 @@
 #include "lpc18xx.dtsi"
 #include "lpc4350.dtsi"
 
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
 / {
 	model = "Hitex LPC4350 Evaluation Board";
 	compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
@@ -34,6 +37,88 @@
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
+
+	pca_buttons {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		autorepeat;
+
+		button@0 {
+			label = "joy:right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "joy:up";
+			linux,code = <KEY_UP>;
+			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+
+		button@2 {
+			label = "joy:enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "joy:left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button@4 {
+			label = "joy:down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		button@5 {
+			label = "user:sw3";
+			linux,code = <KEY_F1>;
+			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button@6 {
+			label = "user:sw4";
+			linux,code = <KEY_F2>;
+			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button@7 {
+			label = "user:sw5";
+			linux,code = <KEY_F3>;
+			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pca_leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "ext:led0";
+			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "ext:led1";
+			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			label = "ext:led2";
+			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "ext:led3";
+			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &pinctrl {
@@ -186,6 +271,43 @@
 		};
 	};
 
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		uart0_rx_cfg {
 			pins = "pf_11";
@@ -271,6 +393,31 @@
 	clock-frequency = <25000000>;
 };
 
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor@18 {
+		compatible = "nxp,jc42";
+		reg = <0x18>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,24c02";
+		reg = <0x50>;
+	};
+
+	pca_gpio: gpio@24 {
+		compatible = "nxp,pca9673";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &mac {
 	status = "okay";
 	phy-mode = "mii";
@@ -278,6 +425,34 @@
 	pinctrl-0 = <&enet_mii_pins>;
 };
 
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x000000 0x040000>; /* 256 KiB */
+		};
+
+		partition@1 {
+			label = "kernel";
+			reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+		};
+
+		partition@2 {
+			label = "rootfs";
+			reg = <0x300000 0x500000>; /* 5 MiB */
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 5f7bdad80963..079d3cf8c00b 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -332,6 +332,14 @@
 		};
 	};
 
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
 	sdmmc_pins: sdmmc-pins {
 		sdmmc_clk_cfg {
 			pins = "pc_0";
@@ -363,6 +371,49 @@
 		};
 	};
 
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <0>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
+	ssp0_pins: ssp0-pins {
+		ssp0_sck_miso_mosi {
+			pins = "pf_0", "pf_2", "pf_3";
+			function = "ssp0";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp0_ssel {
+			pins = "pf_1";
+			function = "ssp0";
+			bias-pull-up;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		uart0_rx_cfg {
 			pins = "pf_11";
@@ -410,6 +461,28 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	mma7455@1d {
+		compatible = "fsl,mma7455";
+		reg = <0x1d>;
+	};
+
+	lm75@48 {
+		compatible = "nxp,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@57 {
+		compatible = "microchip,24c64";
+		reg = <0x57>;
+	};
+};
+
 &emc {
 	status = "okay";
 	pinctrl-names = "default";
@@ -489,6 +562,33 @@
 	pinctrl-0 = <&sdmmc_pins>;
 };
 
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "data";
+			reg = <0 0x200000>;
+		};
+	};
+};
+
+&ssp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp0_pins>;
+	num-cs = <1>;
+};
+
 &uart0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi
index fb9ecc754e8d..72f12db8d53a 100644
--- a/arch/arm/boot/dts/lpc4357.dtsi
+++ b/arch/arm/boot/dts/lpc4357.dtsi
@@ -37,3 +37,7 @@
 		};
 	};
 };
+
+&eeprom {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
index 0521e6864cb7..940875316d0f 100644
--- a/arch/arm/boot/dts/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/ls1021a-qds.dts
@@ -320,6 +320,10 @@
 	status = "okay";
 };
 
+&sata {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index e008f9367510..75ecaed32ae5 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -105,6 +105,15 @@
 			bitclock-master;
 		};
 	};
+
+	panel: panel {
+		compatible = "nec,nl4827hc19-05b";
+	};
+};
+
+&dcu {
+	fsl,panel = <&panel>;
+	status = "okay";
 };
 
 &dspi1 {
@@ -144,6 +153,19 @@
 
 &i2c0 {
 	status = "okay";
+
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	ina220@41 {
+		compatible = "ti,ina220";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
 };
 
 &i2c1 {
@@ -199,6 +221,10 @@
 	status = "okay";
 };
 
+&sata {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 973a496207fc..726372d3adc0 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -53,6 +53,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		crypto = &crypto;
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
 		ethernet2 = &enet2;
@@ -142,12 +143,62 @@
 			status = "disabled";
 		};
 
+		sata: sata@3200000 {
+			compatible = "fsl,ls1021a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x0 0x20220520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		scfg: scfg@1570000 {
 			compatible = "fsl,ls1021a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
 		};
 
+		crypto: crypto@1700000 {
+			compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+			fsl,sec-era = <7>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg		 = <0x0 0x1700000 0x0 0x100000>;
+			ranges		 = <0x0 0x0 0x1700000 0x100000>;
+			interrupts	 = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+
+			sec_jr0: jr@10000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x10000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr1: jr@20000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x20000 0x10000>;
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr2: jr@30000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x30000 0x10000>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sec_jr3: jr@40000 {
+				compatible = "fsl,sec-v5.0-job-ring",
+				     "fsl,sec-v4.0-job-ring";
+				reg = <0x40000 0x10000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+		};
+
 		clockgen: clocking@1ee1000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -388,6 +439,16 @@
 				 <&platform_clk 1>;
 		};
 
+		dcu: dcu@2ce0000 {
+			compatible = "fsl,ls1021a-dcu";
+			reg = <0x0 0x2ce0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 0>;
+			clock-names = "dcu";
+			big-endian;
+			status = "disabled";
+		};
+
 		mdio0: mdio@2d24000 {
 			compatible = "gianfar";
 			device_type = "mdio";
@@ -396,6 +457,18 @@
 			reg = <0x0 0x2d24000 0x0 0x4000>;
 		};
 
+		ptp_clock@2d10e00 {
+			compatible = "fsl,etsec-ptp";
+			reg = <0x0 0x2d10e00 0x0 0xb0>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,tclk-period = <5>;
+			fsl,tmr-prsc    = <2>;
+			fsl,tmr-add     = <0xaaaaaaab>;
+			fsl,tmr-fiper1  = <999999990>;
+			fsl,tmr-fiper2  = <99990>;
+			fsl,max-adj     = <499999999>;
+		};
+
 		enet0: ethernet@2d10000 {
 			compatible = "fsl,etsec2";
 			device_type = "network";
@@ -405,6 +478,7 @@
 			model = "eTSEC";
 			fsl,magic-packet;
 			ranges;
+			dma-coherent;
 
 			queue-group@2d10000 {
 				#address-cells = <2>;
@@ -433,6 +507,7 @@
 			interrupt-parent = <&gic>;
 			model = "eTSEC";
 			ranges;
+			dma-coherent;
 
 			queue-group@2d50000  {
 				#address-cells = <2>;
@@ -461,6 +536,7 @@
 			interrupt-parent = <&gic>;
 			model = "eTSEC";
 			ranges;
+			dma-coherent;
 
 			queue-group@2d90000  {
 				#address-cells = <2>;
@@ -494,6 +570,51 @@
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+			fsl,pcie-scfg = <&scfg 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
+			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,pcie-scfg = <&scfg 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index a2ddcb8c545a..45619f6162c5 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -91,8 +91,8 @@
 		clock-frequency = <141666666>;
 	};
 
-	pinctrl: pinctrl@c1109880 {
-		compatible = "amlogic,meson8-pinctrl";
+	pinctrl_cbus: pinctrl@c1109880 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
 		reg = <0xc1109880 0x10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -108,29 +108,6 @@
 			#gpio-cells = <2>;
 		};
 
-		gpio_ao: ao-bank@c1108030 {
-			reg = <0xc8100014 0x4>,
-			      <0xc810002c 0x4>,
-			      <0xc8100024 0x8>;
-			reg-names = "mux", "pull", "gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		uart_ao_a_pins: uart_ao_a {
-			mux {
-				groups = "uart_tx_ao_a", "uart_rx_ao_a";
-				function = "uart_ao";
-			};
-		};
-
-		i2c_ao_pins: i2c_mst_ao {
-			mux {
-				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
-				function = "i2c_mst_ao";
-			};
-		};
-
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -157,4 +134,34 @@
 		};
 	};
 
+	pinctrl_aobus: pinctrl@c8100084 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		reg = <0xc8100084 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio_ao: ao-bank@c1108030 {
+			reg = <0xc8100014 0x4>,
+			      <0xc810002c 0x4>,
+			      <0xc8100024 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+			};
+		};
+	};
 }; /* end of / */
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
new file mode 100644
index 000000000000..c7fdaeabbe7b
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+	model = "TRONFY MXQ S805";
+	compatible = "tronfy,mxq", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
new file mode 100644
index 000000000000..e50f1a1fdbc7
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hardkernel ODROID-C1";
+	compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		blue {
+			label = "c1:blue:alive";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
new file mode 100644
index 000000000000..2bfe401a4da9
--- /dev/null
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+		};
+
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+		};
+
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		L2: l2-cache-controller@c4200000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xc4200000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xc4301000 0x1000>,
+			      <0xc4300100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		wdt: watchdog@c1109900 {
+			compatible = "amlogic,meson8b-wdt";
+			reg = <0xc1109900 0x8>;
+			interrupts = <0 0 1>;
+		};
+
+		timer@c1109940 {
+			compatible = "amlogic,meson6-timer";
+			reg = <0xc1109940 0x18>;
+			interrupts = <0 10 1>;
+		};
+
+		uart_AO: serial@c81004c0 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc81004c0 0x18>;
+			interrupts = <0 90 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		uart_A: serial@c11084c0 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc11084c0 0x18>;
+			interrupts = <0 26 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		uart_B: serial@c11084dc {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc11084dc 0x18>;
+			interrupts = <0 75 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		uart_C: serial@c1108700 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc1108700 0x18>;
+			interrupts = <0 93 1>;
+			clocks = <&clkc CLKID_CLK81>;
+			status = "disabled";
+		};
+
+		clkc: clock-controller@c1104000 {
+			#clock-cells = <1>;
+			compatible = "amlogic,meson8b-clkc";
+			reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+		};
+
+		pinctrl_cbus: pinctrl@c1109880 {
+			compatible = "amlogic,meson8b-cbus-pinctrl";
+			reg = <0xc1109880 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio: banks@c11080b0 {
+				reg = <0xc11080b0 0x28>,
+				      <0xc11080e8 0x18>,
+				      <0xc1108120 0x18>,
+				      <0xc1108030 0x38>;
+				reg-names = "mux", "pull", "pull-enable", "gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		pinctrl_aobus: pinctrl@c8100084 {
+			compatible = "amlogic,meson8b-aobus-pinctrl";
+			reg = <0xc8100084 0xc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio_ao: ao-bank@c1108030 {
+				reg = <0xc8100014 0x4>,
+				      <0xc810002c 0x4>,
+				      <0xc8100024 0x8>;
+				reg-names = "mux", "pull", "gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			uart_ao_a_pins: uart_ao_a {
+				mux {
+					groups = "uart_tx_ao_a", "uart_rx_ao_a";
+					function = "uart_ao";
+				};
+			};
+		};
+	};
+}; /* end of / */
diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/boot/dts/mt2701-evb.dts
index a771459206aa..082ca8807c62 100644
--- a/arch/arm/mach-netx/include/mach/param.h
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -1,18 +1,29 @@
 /*
- *  arch/arm/mach-netx/include/mach/param.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin Lo <erin.lo@mediatek.com>
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+
+/dts-v1/;
+#include "mt2701.dtsi"
+
+/ {
+	model = "MediaTek MT2701 evaluation board";
+	compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt2701-pinfunc.h b/arch/arm/boot/dts/mt2701-pinfunc.h
new file mode 100644
index 000000000000..e24ebc8d928e
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701-pinfunc.h
@@ -0,0 +1,735 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Biao Huang <biao.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DTS_MT2701_PINFUNC_H
+#define __DTS_MT2701_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(0) | 1)
+#define MT2701_PIN_0_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDI (MTK_PIN_NO(0) | 2)
+
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(1) | 1)
+#define MT2701_PIN_1_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDO (MTK_PIN_NO(1) | 2)
+
+#define MT2701_PIN_2_PWRAP_INT__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT2701_PIN_2_PWRAP_INT__FUNC_PWRAP_INT (MTK_PIN_NO(2) | 1)
+
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT2701_PIN_3_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(3) | 1)
+
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT2701_PIN_4_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(4) | 1)
+
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_PWRAP_SPICK2_I (MTK_PIN_NO(5) | 1)
+#define MT2701_PIN_5_PWRAP_SPI0_CK2__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 5)
+
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_PWRAP_SPICS2_B_I (MTK_PIN_NO(6) | 1)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_ANT_SEL0 (MTK_PIN_NO(6) | 5)
+#define MT2701_PIN_6_PWRAP_SPI0_CSN2__FUNC_DBG_MON_A_0 (MTK_PIN_NO(6) | 7)
+
+#define MT2701_PIN_7_SPI1_CSN__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_SPI1_CS (MTK_PIN_NO(7) | 1)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_KCOL0 (MTK_PIN_NO(7) | 4)
+#define MT2701_PIN_7_SPI1_CSN__FUNC_DBG_MON_B_12 (MTK_PIN_NO(7) | 7)
+
+#define MT2701_PIN_8_SPI1_MI__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MI (MTK_PIN_NO(8) | 1)
+#define MT2701_PIN_8_SPI1_MI__FUNC_SPI1_MO (MTK_PIN_NO(8) | 2)
+#define MT2701_PIN_8_SPI1_MI__FUNC_KCOL1 (MTK_PIN_NO(8) | 4)
+#define MT2701_PIN_8_SPI1_MI__FUNC_DBG_MON_B_13 (MTK_PIN_NO(8) | 7)
+
+#define MT2701_PIN_9_SPI1_MO__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MO (MTK_PIN_NO(9) | 1)
+#define MT2701_PIN_9_SPI1_MO__FUNC_SPI1_MI (MTK_PIN_NO(9) | 2)
+#define MT2701_PIN_9_SPI1_MO__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(9) | 3)
+#define MT2701_PIN_9_SPI1_MO__FUNC_KCOL2 (MTK_PIN_NO(9) | 4)
+#define MT2701_PIN_9_SPI1_MO__FUNC_DBG_MON_B_14 (MTK_PIN_NO(9) | 7)
+
+#define MT2701_PIN_10_RTC32K_CK__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT2701_PIN_10_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(10) | 1)
+
+#define MT2701_PIN_11_WATCHDOG__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT2701_PIN_11_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(11) | 1)
+
+#define MT2701_PIN_12_SRCLKENA__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT2701_PIN_12_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(12) | 1)
+
+#define MT2701_PIN_13_SRCLKENAI__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT2701_PIN_13_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(13) | 1)
+
+#define MT2701_PIN_14_URXD2__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT2701_PIN_14_URXD2__FUNC_URXD2 (MTK_PIN_NO(14) | 1)
+#define MT2701_PIN_14_URXD2__FUNC_UTXD2 (MTK_PIN_NO(14) | 2)
+#define MT2701_PIN_14_URXD2__FUNC_SRCCLKENAI2 (MTK_PIN_NO(14) | 5)
+#define MT2701_PIN_14_URXD2__FUNC_DBG_MON_B_30 (MTK_PIN_NO(14) | 7)
+
+#define MT2701_PIN_15_UTXD2__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT2701_PIN_15_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(15) | 1)
+#define MT2701_PIN_15_UTXD2__FUNC_URXD2 (MTK_PIN_NO(15) | 2)
+#define MT2701_PIN_15_UTXD2__FUNC_DBG_MON_B_31 (MTK_PIN_NO(15) | 7)
+
+#define MT2701_PIN_18_PCM_CLK__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT2701_PIN_18_PCM_CLK__FUNC_PCM_CLK0 (MTK_PIN_NO(18) | 1)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(18) | 2)
+#define MT2701_PIN_18_PCM_CLK__FUNC_MM_TEST_CK (MTK_PIN_NO(18) | 4)
+#define MT2701_PIN_18_PCM_CLK__FUNC_CONN_DSP_JCK (MTK_PIN_NO(18) | 5)
+#define MT2701_PIN_18_PCM_CLK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(18) | 6)
+#define MT2701_PIN_18_PCM_CLK__FUNC_DBG_MON_A_3 (MTK_PIN_NO(18) | 7)
+
+#define MT2701_PIN_19_PCM_SYNC__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_PCM_SYNC (MTK_PIN_NO(19) | 1)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(19) | 2)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(19) | 5)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(19) | 6)
+#define MT2701_PIN_19_PCM_SYNC__FUNC_DBG_MON_A_5 (MTK_PIN_NO(19) | 7)
+
+#define MT2701_PIN_20_PCM_RX__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_RX (MTK_PIN_NO(20) | 1)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(20) | 2)
+#define MT2701_PIN_20_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(20) | 3)
+#define MT2701_PIN_20_PCM_RX__FUNC_PCM_TX (MTK_PIN_NO(20) | 4)
+#define MT2701_PIN_20_PCM_RX__FUNC_CONN_DSP_JDI (MTK_PIN_NO(20) | 5)
+#define MT2701_PIN_20_PCM_RX__FUNC_WCN_PCM_RX (MTK_PIN_NO(20) | 6)
+#define MT2701_PIN_20_PCM_RX__FUNC_DBG_MON_A_4 (MTK_PIN_NO(20) | 7)
+
+#define MT2701_PIN_21_PCM_TX__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_TX (MTK_PIN_NO(21) | 1)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(21) | 2)
+#define MT2701_PIN_21_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(21) | 3)
+#define MT2701_PIN_21_PCM_TX__FUNC_PCM_RX (MTK_PIN_NO(21) | 4)
+#define MT2701_PIN_21_PCM_TX__FUNC_CONN_DSP_JMS (MTK_PIN_NO(21) | 5)
+#define MT2701_PIN_21_PCM_TX__FUNC_WCN_PCM_TX (MTK_PIN_NO(21) | 6)
+#define MT2701_PIN_21_PCM_TX__FUNC_DBG_MON_A_2 (MTK_PIN_NO(21) | 7)
+
+#define MT2701_PIN_22_EINT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT2701_PIN_22_EINT0__FUNC_UCTS0 (MTK_PIN_NO(22) | 1)
+#define MT2701_PIN_22_EINT0__FUNC_KCOL3 (MTK_PIN_NO(22) | 3)
+#define MT2701_PIN_22_EINT0__FUNC_CONN_DSP_JDO (MTK_PIN_NO(22) | 4)
+#define MT2701_PIN_22_EINT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 5)
+#define MT2701_PIN_22_EINT0__FUNC_DBG_MON_A_30 (MTK_PIN_NO(22) | 7)
+#define MT2701_PIN_22_EINT0__FUNC_PCIE0_PERST_N (MTK_PIN_NO(22) | 10)
+
+#define MT2701_PIN_23_EINT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT2701_PIN_23_EINT1__FUNC_URTS0 (MTK_PIN_NO(23) | 1)
+#define MT2701_PIN_23_EINT1__FUNC_KCOL2 (MTK_PIN_NO(23) | 3)
+#define MT2701_PIN_23_EINT1__FUNC_CONN_MCU_TDO (MTK_PIN_NO(23) | 4)
+#define MT2701_PIN_23_EINT1__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(23) | 5)
+#define MT2701_PIN_23_EINT1__FUNC_DBG_MON_A_29 (MTK_PIN_NO(23) | 7)
+#define MT2701_PIN_23_EINT1__FUNC_PCIE1_PERST_N (MTK_PIN_NO(23) | 10)
+
+#define MT2701_PIN_24_EINT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT2701_PIN_24_EINT2__FUNC_UCTS1 (MTK_PIN_NO(24) | 1)
+#define MT2701_PIN_24_EINT2__FUNC_KCOL1 (MTK_PIN_NO(24) | 3)
+#define MT2701_PIN_24_EINT2__FUNC_CONN_MCU_DBGACK_N (MTK_PIN_NO(24) | 4)
+#define MT2701_PIN_24_EINT2__FUNC_DBG_MON_A_28 (MTK_PIN_NO(24) | 7)
+#define MT2701_PIN_24_EINT2__FUNC_PCIE2_PERST_N (MTK_PIN_NO(24) | 10)
+
+#define MT2701_PIN_25_EINT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT2701_PIN_25_EINT3__FUNC_URTS1 (MTK_PIN_NO(25) | 1)
+#define MT2701_PIN_25_EINT3__FUNC_KCOL0 (MTK_PIN_NO(25) | 3)
+#define MT2701_PIN_25_EINT3__FUNC_CONN_MCU_DBGI_N (MTK_PIN_NO(25) | 4)
+#define MT2701_PIN_25_EINT3__FUNC_DBG_MON_A_27 (MTK_PIN_NO(25) | 7)
+
+#define MT2701_PIN_26_EINT4__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT2701_PIN_26_EINT4__FUNC_UCTS3 (MTK_PIN_NO(26) | 1)
+#define MT2701_PIN_26_EINT4__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(26) | 2)
+#define MT2701_PIN_26_EINT4__FUNC_KROW3 (MTK_PIN_NO(26) | 3)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_TCK0 (MTK_PIN_NO(26) | 4)
+#define MT2701_PIN_26_EINT4__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(26) | 5)
+#define MT2701_PIN_26_EINT4__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(26) | 6)
+#define MT2701_PIN_26_EINT4__FUNC_DBG_MON_A_26 (MTK_PIN_NO(26) | 7)
+
+#define MT2701_PIN_27_EINT5__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT2701_PIN_27_EINT5__FUNC_URTS3 (MTK_PIN_NO(27) | 1)
+#define MT2701_PIN_27_EINT5__FUNC_IDDIG_P1 (MTK_PIN_NO(27) | 2)
+#define MT2701_PIN_27_EINT5__FUNC_KROW2 (MTK_PIN_NO(27) | 3)
+#define MT2701_PIN_27_EINT5__FUNC_CONN_MCU_TDI (MTK_PIN_NO(27) | 4)
+#define MT2701_PIN_27_EINT5__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(27) | 6)
+#define MT2701_PIN_27_EINT5__FUNC_DBG_MON_A_25 (MTK_PIN_NO(27) | 7)
+
+#define MT2701_PIN_28_EINT6__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT2701_PIN_28_EINT6__FUNC_DRV_VBUS (MTK_PIN_NO(28) | 1)
+#define MT2701_PIN_28_EINT6__FUNC_KROW1 (MTK_PIN_NO(28) | 3)
+#define MT2701_PIN_28_EINT6__FUNC_CONN_MCU_TRST_B (MTK_PIN_NO(28) | 4)
+#define MT2701_PIN_28_EINT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(28) | 6)
+#define MT2701_PIN_28_EINT6__FUNC_DBG_MON_A_24 (MTK_PIN_NO(28) | 7)
+
+#define MT2701_PIN_29_EINT7__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT2701_PIN_29_EINT7__FUNC_IDDIG (MTK_PIN_NO(29) | 1)
+#define MT2701_PIN_29_EINT7__FUNC_MSDC1_WP (MTK_PIN_NO(29) | 2)
+#define MT2701_PIN_29_EINT7__FUNC_KROW0 (MTK_PIN_NO(29) | 3)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_TMS (MTK_PIN_NO(29) | 4)
+#define MT2701_PIN_29_EINT7__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(29) | 5)
+#define MT2701_PIN_29_EINT7__FUNC_DBG_MON_A_23 (MTK_PIN_NO(29) | 7)
+#define MT2701_PIN_29_EINT7__FUNC_PCIE2_PERST_N (MTK_PIN_NO(29) | 14)
+
+#define MT2701_PIN_33_I2S1_DATA__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA (MTK_PIN_NO(33) | 1)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_I2S1_DATA_BYPS (MTK_PIN_NO(33) | 2)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_PCM_TX (MTK_PIN_NO(33) | 3)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_IMG_TEST_CK (MTK_PIN_NO(33) | 4)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_G1_RXD0 (MTK_PIN_NO(33) | 5)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_WCN_PCM_TX (MTK_PIN_NO(33) | 6)
+#define MT2701_PIN_33_I2S1_DATA__FUNC_DBG_MON_B_8 (MTK_PIN_NO(33) | 7)
+
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_I2S1_DATA_IN (MTK_PIN_NO(34) | 1)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(34) | 3)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_VDEC_TEST_CK (MTK_PIN_NO(34) | 4)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_G1_RXD1 (MTK_PIN_NO(34) | 5)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_WCN_PCM_RX (MTK_PIN_NO(34) | 6)
+#define MT2701_PIN_34_I2S1_DATA_IN__FUNC_DBG_MON_B_7 (MTK_PIN_NO(34) | 7)
+
+#define MT2701_PIN_35_I2S1_BCK__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(35) | 1)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(35) | 3)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_G1_RXD2 (MTK_PIN_NO(35) | 5)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_WCN_PCM_CLKO (MTK_PIN_NO(35) | 6)
+#define MT2701_PIN_35_I2S1_BCK__FUNC_DBG_MON_B_9 (MTK_PIN_NO(35) | 7)
+
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_I2S1_LRCK (MTK_PIN_NO(36) | 1)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(36) | 3)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_G1_RXD3 (MTK_PIN_NO(36) | 5)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_WCN_PCM_SYNC (MTK_PIN_NO(36) | 6)
+#define MT2701_PIN_36_I2S1_LRCK__FUNC_DBG_MON_B_10 (MTK_PIN_NO(36) | 7)
+
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_I2S1_MCLK (MTK_PIN_NO(37) | 1)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_G1_RXDV (MTK_PIN_NO(37) | 5)
+#define MT2701_PIN_37_I2S1_MCLK__FUNC_DBG_MON_B_11 (MTK_PIN_NO(37) | 7)
+
+#define MT2701_PIN_39_JTMS__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT2701_PIN_39_JTMS__FUNC_JTMS (MTK_PIN_NO(39) | 1)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_TMS (MTK_PIN_NO(39) | 2)
+#define MT2701_PIN_39_JTMS__FUNC_CONN_MCU_AICE_JMSC (MTK_PIN_NO(39) | 3)
+#define MT2701_PIN_39_JTMS__FUNC_DFD_TMS_XI (MTK_PIN_NO(39) | 4)
+
+#define MT2701_PIN_40_JTCK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT2701_PIN_40_JTCK__FUNC_JTCK (MTK_PIN_NO(40) | 1)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_TCK1 (MTK_PIN_NO(40) | 2)
+#define MT2701_PIN_40_JTCK__FUNC_CONN_MCU_AICE_JCKC (MTK_PIN_NO(40) | 3)
+#define MT2701_PIN_40_JTCK__FUNC_DFD_TCK_XI (MTK_PIN_NO(40) | 4)
+
+#define MT2701_PIN_41_JTDI__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT2701_PIN_41_JTDI__FUNC_JTDI (MTK_PIN_NO(41) | 1)
+#define MT2701_PIN_41_JTDI__FUNC_CONN_MCU_TDI (MTK_PIN_NO(41) | 2)
+#define MT2701_PIN_41_JTDI__FUNC_DFD_TDI_XI (MTK_PIN_NO(41) | 4)
+
+#define MT2701_PIN_42_JTDO__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT2701_PIN_42_JTDO__FUNC_JTDO (MTK_PIN_NO(42) | 1)
+#define MT2701_PIN_42_JTDO__FUNC_CONN_MCU_TDO (MTK_PIN_NO(42) | 2)
+#define MT2701_PIN_42_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(42) | 4)
+
+#define MT2701_PIN_43_NCLE__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT2701_PIN_43_NCLE__FUNC_NCLE (MTK_PIN_NO(43) | 1)
+#define MT2701_PIN_43_NCLE__FUNC_EXT_XCS2 (MTK_PIN_NO(43) | 2)
+
+#define MT2701_PIN_44_NCEB1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT2701_PIN_44_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(44) | 1)
+#define MT2701_PIN_44_NCEB1__FUNC_IDDIG (MTK_PIN_NO(44) | 2)
+
+#define MT2701_PIN_45_NCEB0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT2701_PIN_45_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(45) | 1)
+#define MT2701_PIN_45_NCEB0__FUNC_DRV_VBUS (MTK_PIN_NO(45) | 2)
+
+#define MT2701_PIN_46_IR__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT2701_PIN_46_IR__FUNC_IR (MTK_PIN_NO(46) | 1)
+
+#define MT2701_PIN_47_NREB__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT2701_PIN_47_NREB__FUNC_NREB (MTK_PIN_NO(47) | 1)
+#define MT2701_PIN_47_NREB__FUNC_IDDIG_P1 (MTK_PIN_NO(47) | 2)
+
+#define MT2701_PIN_48_NRNB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT2701_PIN_48_NRNB__FUNC_NRNB (MTK_PIN_NO(48) | 1)
+#define MT2701_PIN_48_NRNB__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(48) | 2)
+
+#define MT2701_PIN_49_I2S0_DATA__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA (MTK_PIN_NO(49) | 1)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_I2S0_DATA_BYPS (MTK_PIN_NO(49) | 2)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_PCM_TX (MTK_PIN_NO(49) | 3)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_WCN_I2S_DO (MTK_PIN_NO(49) | 6)
+#define MT2701_PIN_49_I2S0_DATA__FUNC_DBG_MON_B_3 (MTK_PIN_NO(49) | 7)
+
+#define MT2701_PIN_53_SPI0_CSN__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS (MTK_PIN_NO(53) | 1)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_SPDIF (MTK_PIN_NO(53) | 3)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_ADC_CK (MTK_PIN_NO(53) | 4)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_PWM1 (MTK_PIN_NO(53) | 5)
+#define MT2701_PIN_53_SPI0_CSN__FUNC_DBG_MON_A_7 (MTK_PIN_NO(53) | 7)
+
+#define MT2701_PIN_54_SPI0_CK__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPI0_CK (MTK_PIN_NO(54) | 1)
+#define MT2701_PIN_54_SPI0_CK__FUNC_SPDIF_IN1 (MTK_PIN_NO(54) | 3)
+#define MT2701_PIN_54_SPI0_CK__FUNC_ADC_DAT_IN (MTK_PIN_NO(54) | 4)
+#define MT2701_PIN_54_SPI0_CK__FUNC_DBG_MON_A_10 (MTK_PIN_NO(54) | 7)
+
+#define MT2701_PIN_55_SPI0_MI__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MI (MTK_PIN_NO(55) | 1)
+#define MT2701_PIN_55_SPI0_MI__FUNC_SPI0_MO (MTK_PIN_NO(55) | 2)
+#define MT2701_PIN_55_SPI0_MI__FUNC_MSDC1_WP (MTK_PIN_NO(55) | 3)
+#define MT2701_PIN_55_SPI0_MI__FUNC_ADC_WS (MTK_PIN_NO(55) | 4)
+#define MT2701_PIN_55_SPI0_MI__FUNC_PWM2 (MTK_PIN_NO(55) | 5)
+#define MT2701_PIN_55_SPI0_MI__FUNC_DBG_MON_A_8 (MTK_PIN_NO(55) | 7)
+
+#define MT2701_PIN_56_SPI0_MO__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MO (MTK_PIN_NO(56) | 1)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPI0_MI (MTK_PIN_NO(56) | 2)
+#define MT2701_PIN_56_SPI0_MO__FUNC_SPDIF_IN0 (MTK_PIN_NO(56) | 3)
+#define MT2701_PIN_56_SPI0_MO__FUNC_DBG_MON_A_9 (MTK_PIN_NO(56) | 7)
+
+#define MT2701_PIN_57_SDA1__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT2701_PIN_57_SDA1__FUNC_SDA1 (MTK_PIN_NO(57) | 1)
+
+#define MT2701_PIN_58_SCL1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT2701_PIN_58_SCL1__FUNC_SCL1 (MTK_PIN_NO(58) | 1)
+
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_I2S0_DATA_IN (MTK_PIN_NO(72) | 1)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PCM_RX (MTK_PIN_NO(72) | 3)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_PWM0 (MTK_PIN_NO(72) | 4)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DISP_PWM (MTK_PIN_NO(72) | 5)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_WCN_I2S_DI (MTK_PIN_NO(72) | 6)
+#define MT2701_PIN_72_I2S0_DATA_IN__FUNC_DBG_MON_B_2 (MTK_PIN_NO(72) | 7)
+
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_I2S0_LRCK (MTK_PIN_NO(73) | 1)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_PCM_SYNC (MTK_PIN_NO(73) | 3)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_WCN_I2S_LRCK (MTK_PIN_NO(73) | 6)
+#define MT2701_PIN_73_I2S0_LRCK__FUNC_DBG_MON_B_5 (MTK_PIN_NO(73) | 7)
+
+#define MT2701_PIN_74_I2S0_BCK__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(74) | 1)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_PCM_CLK0 (MTK_PIN_NO(74) | 3)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_WCN_I2S_BCK (MTK_PIN_NO(74) | 6)
+#define MT2701_PIN_74_I2S0_BCK__FUNC_DBG_MON_B_4 (MTK_PIN_NO(74) | 7)
+
+#define MT2701_PIN_75_SDA0__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT2701_PIN_75_SDA0__FUNC_SDA0 (MTK_PIN_NO(75) | 1)
+
+#define MT2701_PIN_76_SCL0__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT2701_PIN_76_SCL0__FUNC_SCL0 (MTK_PIN_NO(76) | 1)
+
+#define MT2701_PIN_77_SDA2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT2701_PIN_77_SDA2__FUNC_SDA2 (MTK_PIN_NO(77) | 1)
+
+#define MT2701_PIN_78_SCL2__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT2701_PIN_78_SCL2__FUNC_SCL2 (MTK_PIN_NO(78) | 1)
+
+#define MT2701_PIN_79_URXD0__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT2701_PIN_79_URXD0__FUNC_URXD0 (MTK_PIN_NO(79) | 1)
+#define MT2701_PIN_79_URXD0__FUNC_UTXD0 (MTK_PIN_NO(79) | 2)
+#define MT2701_PIN_79_URXD0__FUNC_ (MTK_PIN_NO(79) | 5)
+
+#define MT2701_PIN_80_UTXD0__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT2701_PIN_80_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(80) | 1)
+#define MT2701_PIN_80_UTXD0__FUNC_URXD0 (MTK_PIN_NO(80) | 2)
+
+#define MT2701_PIN_81_URXD1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT2701_PIN_81_URXD1__FUNC_URXD1 (MTK_PIN_NO(81) | 1)
+#define MT2701_PIN_81_URXD1__FUNC_UTXD1 (MTK_PIN_NO(81) | 2)
+
+#define MT2701_PIN_82_UTXD1__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT2701_PIN_82_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(82) | 1)
+#define MT2701_PIN_82_UTXD1__FUNC_URXD1 (MTK_PIN_NO(82) | 2)
+
+#define MT2701_PIN_83_LCM_RST__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT2701_PIN_83_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(83) | 1)
+#define MT2701_PIN_83_LCM_RST__FUNC_VDAC_CK_XI (MTK_PIN_NO(83) | 2)
+#define MT2701_PIN_83_LCM_RST__FUNC_DBG_MON_B_1 (MTK_PIN_NO(83) | 7)
+
+#define MT2701_PIN_84_DSI_TE__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT2701_PIN_84_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(84) | 1)
+#define MT2701_PIN_84_DSI_TE__FUNC_DBG_MON_B_0 (MTK_PIN_NO(84) | 7)
+
+#define MT2701_PIN_91_TDN3__FUNC_GPI91 (MTK_PIN_NO(91) | 0)
+#define MT2701_PIN_91_TDN3__FUNC_TDN3 (MTK_PIN_NO(91) | 1)
+
+#define MT2701_PIN_92_TDP3__FUNC_GPI92 (MTK_PIN_NO(92) | 0)
+#define MT2701_PIN_92_TDP3__FUNC_TDP3 (MTK_PIN_NO(92) | 1)
+
+#define MT2701_PIN_93_TDN2__FUNC_GPI93 (MTK_PIN_NO(93) | 0)
+#define MT2701_PIN_93_TDN2__FUNC_TDN2 (MTK_PIN_NO(93) | 1)
+
+#define MT2701_PIN_94_TDP2__FUNC_GPI94 (MTK_PIN_NO(94) | 0)
+#define MT2701_PIN_94_TDP2__FUNC_TDP2 (MTK_PIN_NO(94) | 1)
+
+#define MT2701_PIN_95_TCN__FUNC_GPI95 (MTK_PIN_NO(95) | 0)
+#define MT2701_PIN_95_TCN__FUNC_TCN (MTK_PIN_NO(95) | 1)
+
+#define MT2701_PIN_96_TCP__FUNC_GPI96 (MTK_PIN_NO(96) | 0)
+#define MT2701_PIN_96_TCP__FUNC_TCP (MTK_PIN_NO(96) | 1)
+
+#define MT2701_PIN_97_TDN1__FUNC_GPI97 (MTK_PIN_NO(97) | 0)
+#define MT2701_PIN_97_TDN1__FUNC_TDN1 (MTK_PIN_NO(97) | 1)
+
+#define MT2701_PIN_98_TDP1__FUNC_GPI98 (MTK_PIN_NO(98) | 0)
+#define MT2701_PIN_98_TDP1__FUNC_TDP1 (MTK_PIN_NO(98) | 1)
+
+#define MT2701_PIN_99_TDN0__FUNC_GPI99 (MTK_PIN_NO(99) | 0)
+#define MT2701_PIN_99_TDN0__FUNC_TDN0 (MTK_PIN_NO(99) | 1)
+
+#define MT2701_PIN_100_TDP0__FUNC_GPI100 (MTK_PIN_NO(100) | 0)
+#define MT2701_PIN_100_TDP0__FUNC_TDP0 (MTK_PIN_NO(100) | 1)
+
+#define MT2701_PIN_101_SPI2_CSN__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SPI2_CS (MTK_PIN_NO(101) | 1)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_SCL3 (MTK_PIN_NO(101) | 3)
+#define MT2701_PIN_101_SPI2_CSN__FUNC_KROW0 (MTK_PIN_NO(101) | 4)
+
+#define MT2701_PIN_102_SPI2_MI__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MI (MTK_PIN_NO(102) | 1)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SPI2_MO (MTK_PIN_NO(102) | 2)
+#define MT2701_PIN_102_SPI2_MI__FUNC_SDA3 (MTK_PIN_NO(102) | 3)
+#define MT2701_PIN_102_SPI2_MI__FUNC_KROW1 (MTK_PIN_NO(102) | 4)
+
+#define MT2701_PIN_103_SPI2_MO__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MO (MTK_PIN_NO(103) | 1)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SPI2_MI (MTK_PIN_NO(103) | 2)
+#define MT2701_PIN_103_SPI2_MO__FUNC_SCL3 (MTK_PIN_NO(103) | 3)
+#define MT2701_PIN_103_SPI2_MO__FUNC_KROW2 (MTK_PIN_NO(103) | 4)
+
+#define MT2701_PIN_104_SPI2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SPI2_CK (MTK_PIN_NO(104) | 1)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 3)
+#define MT2701_PIN_104_SPI2_CLK__FUNC_KROW3 (MTK_PIN_NO(104) | 4)
+
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(105) | 1)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_ANT_SEL0 (MTK_PIN_NO(105) | 2)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_SDA1 (MTK_PIN_NO(105) | 3)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_I2SOUT_BCK (MTK_PIN_NO(105) | 6)
+#define MT2701_PIN_105_MSDC1_CMD__FUNC_DBG_MON_B_27 (MTK_PIN_NO(105) | 7)
+
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(106) | 1)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_ANT_SEL1 (MTK_PIN_NO(106) | 2)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_SCL1 (MTK_PIN_NO(106) | 3)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_I2SOUT_LRCK (MTK_PIN_NO(106) | 6)
+#define MT2701_PIN_106_MSDC1_CLK__FUNC_DBG_MON_B_28 (MTK_PIN_NO(106) | 7)
+
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(107) | 1)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_ANT_SEL2 (MTK_PIN_NO(107) | 2)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_UTXD0 (MTK_PIN_NO(107) | 5)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_I2SOUT_DATA_OUT (MTK_PIN_NO(107) | 6)
+#define MT2701_PIN_107_MSDC1_DAT0__FUNC_DBG_MON_B_26 (MTK_PIN_NO(107) | 7)
+
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(108) | 1)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_ANT_SEL3 (MTK_PIN_NO(108) | 2)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM0 (MTK_PIN_NO(108) | 3)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_URXD0 (MTK_PIN_NO(108) | 5)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_PWM1 (MTK_PIN_NO(108) | 6)
+#define MT2701_PIN_108_MSDC1_DAT1__FUNC_DBG_MON_B_25 (MTK_PIN_NO(108) | 7)
+
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(109) | 1)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_ANT_SEL4 (MTK_PIN_NO(109) | 2)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_SDA2 (MTK_PIN_NO(109) | 3)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_UTXD1 (MTK_PIN_NO(109) | 5)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_PWM2 (MTK_PIN_NO(109) | 6)
+#define MT2701_PIN_109_MSDC1_DAT2__FUNC_DBG_MON_B_24 (MTK_PIN_NO(109) | 7)
+
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(110) | 1)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_ANT_SEL5 (MTK_PIN_NO(110) | 2)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_SCL2 (MTK_PIN_NO(110) | 3)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(110) | 4)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_URXD1 (MTK_PIN_NO(110) | 5)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_PWM3 (MTK_PIN_NO(110) | 6)
+#define MT2701_PIN_110_MSDC1_DAT3__FUNC_DBG_MON_B_23 (MTK_PIN_NO(110) | 7)
+
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(111) | 1)
+#define MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7 (MTK_PIN_NO(111) | 4)
+
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(112) | 1)
+#define MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6 (MTK_PIN_NO(112) | 4)
+
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(113) | 1)
+#define MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5 (MTK_PIN_NO(113) | 4)
+
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(114) | 1)
+#define MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4 (MTK_PIN_NO(114) | 4)
+
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(115) | 1)
+#define MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8 (MTK_PIN_NO(115) | 4)
+
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(116) | 1)
+#define MT2701_PIN_116_MSDC0_CMD__FUNC_NALE (MTK_PIN_NO(116) | 4)
+
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(117) | 1)
+#define MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB (MTK_PIN_NO(117) | 4)
+
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(118) | 1)
+#define MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3 (MTK_PIN_NO(118) | 4)
+
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(119) | 1)
+#define MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2 (MTK_PIN_NO(119) | 4)
+
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(120) | 1)
+#define MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1 (MTK_PIN_NO(120) | 4)
+
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(121) | 1)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0 (MTK_PIN_NO(121) | 4)
+#define MT2701_PIN_121_MSDC0_DAT0__FUNC_WATCHDOG (MTK_PIN_NO(121) | 5)
+
+#define MT2701_PIN_122_CEC__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT2701_PIN_122_CEC__FUNC_CEC (MTK_PIN_NO(122) | 1)
+#define MT2701_PIN_122_CEC__FUNC_SDA2 (MTK_PIN_NO(122) | 4)
+#define MT2701_PIN_122_CEC__FUNC_URXD0 (MTK_PIN_NO(122) | 5)
+
+#define MT2701_PIN_123_HTPLG__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT2701_PIN_123_HTPLG__FUNC_HTPLG (MTK_PIN_NO(123) | 1)
+#define MT2701_PIN_123_HTPLG__FUNC_SCL2 (MTK_PIN_NO(123) | 4)
+#define MT2701_PIN_123_HTPLG__FUNC_UTXD0 (MTK_PIN_NO(123) | 5)
+
+#define MT2701_PIN_124_HDMISCK__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT2701_PIN_124_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(124) | 1)
+#define MT2701_PIN_124_HDMISCK__FUNC_SDA1 (MTK_PIN_NO(124) | 4)
+#define MT2701_PIN_124_HDMISCK__FUNC_PWM3 (MTK_PIN_NO(124) | 5)
+
+#define MT2701_PIN_125_HDMISD__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT2701_PIN_125_HDMISD__FUNC_HDMISD (MTK_PIN_NO(125) | 1)
+#define MT2701_PIN_125_HDMISD__FUNC_SCL1 (MTK_PIN_NO(125) | 4)
+#define MT2701_PIN_125_HDMISD__FUNC_PWM4 (MTK_PIN_NO(125) | 5)
+
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_I2S0_MCLK (MTK_PIN_NO(126) | 1)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_WCN_I2S_MCLK (MTK_PIN_NO(126) | 6)
+#define MT2701_PIN_126_I2S0_MCLK__FUNC_DBG_MON_B_6 (MTK_PIN_NO(126) | 7)
+
+#define MT2701_PIN_199_SPI1_CLK__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_SPI1_CK (MTK_PIN_NO(199) | 1)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(199) | 3)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_KCOL3 (MTK_PIN_NO(199) | 4)
+#define MT2701_PIN_199_SPI1_CLK__FUNC_DBG_MON_B_15 (MTK_PIN_NO(199) | 7)
+
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_SPDIF_OUT (MTK_PIN_NO(200) | 1)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_G1_TXD3 (MTK_PIN_NO(200) | 5)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_URXD2 (MTK_PIN_NO(200) | 6)
+#define MT2701_PIN_200_SPDIF_OUT__FUNC_DBG_MON_B_16 (MTK_PIN_NO(200) | 7)
+
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_SPDIF_IN0 (MTK_PIN_NO(201) | 1)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_G1_TXEN (MTK_PIN_NO(201) | 5)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_UTXD2 (MTK_PIN_NO(201) | 6)
+#define MT2701_PIN_201_SPDIF_IN0__FUNC_DBG_MON_B_17 (MTK_PIN_NO(201) | 7)
+
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT2701_PIN_202_SPDIF_IN1__FUNC_SPDIF_IN1 (MTK_PIN_NO(202) | 1)
+
+#define MT2701_PIN_203_PWM0__FUNC_GPIO203 (MTK_PIN_NO(203) | 0)
+#define MT2701_PIN_203_PWM0__FUNC_PWM0 (MTK_PIN_NO(203) | 1)
+#define MT2701_PIN_203_PWM0__FUNC_DISP_PWM (MTK_PIN_NO(203) | 2)
+#define MT2701_PIN_203_PWM0__FUNC_G1_TXD2 (MTK_PIN_NO(203) | 5)
+#define MT2701_PIN_203_PWM0__FUNC_DBG_MON_B_18 (MTK_PIN_NO(203) | 7)
+#define MT2701_PIN_203_PWM0__FUNC_I2S2_DATA (MTK_PIN_NO(203) | 9)
+
+#define MT2701_PIN_204_PWM1__FUNC_GPIO204 (MTK_PIN_NO(204) | 0)
+#define MT2701_PIN_204_PWM1__FUNC_PWM1 (MTK_PIN_NO(204) | 1)
+#define MT2701_PIN_204_PWM1__FUNC_CLKM3 (MTK_PIN_NO(204) | 2)
+#define MT2701_PIN_204_PWM1__FUNC_G1_TXD1 (MTK_PIN_NO(204) | 5)
+#define MT2701_PIN_204_PWM1__FUNC_DBG_MON_B_19 (MTK_PIN_NO(204) | 7)
+#define MT2701_PIN_204_PWM1__FUNC_I2S3_DATA (MTK_PIN_NO(204) | 9)
+
+#define MT2701_PIN_205_PWM2__FUNC_GPIO205 (MTK_PIN_NO(205) | 0)
+#define MT2701_PIN_205_PWM2__FUNC_PWM2 (MTK_PIN_NO(205) | 1)
+#define MT2701_PIN_205_PWM2__FUNC_CLKM2 (MTK_PIN_NO(205) | 2)
+#define MT2701_PIN_205_PWM2__FUNC_G1_TXD0 (MTK_PIN_NO(205) | 5)
+#define MT2701_PIN_205_PWM2__FUNC_DBG_MON_B_20 (MTK_PIN_NO(205) | 7)
+
+#define MT2701_PIN_206_PWM3__FUNC_GPIO206 (MTK_PIN_NO(206) | 0)
+#define MT2701_PIN_206_PWM3__FUNC_PWM3 (MTK_PIN_NO(206) | 1)
+#define MT2701_PIN_206_PWM3__FUNC_CLKM1 (MTK_PIN_NO(206) | 2)
+#define MT2701_PIN_206_PWM3__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(206) | 3)
+#define MT2701_PIN_206_PWM3__FUNC_G1_TXC (MTK_PIN_NO(206) | 5)
+#define MT2701_PIN_206_PWM3__FUNC_DBG_MON_B_21 (MTK_PIN_NO(206) | 7)
+
+#define MT2701_PIN_207_PWM4__FUNC_GPIO207 (MTK_PIN_NO(207) | 0)
+#define MT2701_PIN_207_PWM4__FUNC_PWM4 (MTK_PIN_NO(207) | 1)
+#define MT2701_PIN_207_PWM4__FUNC_CLKM0 (MTK_PIN_NO(207) | 2)
+#define MT2701_PIN_207_PWM4__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(207) | 3)
+#define MT2701_PIN_207_PWM4__FUNC_G1_RXC (MTK_PIN_NO(207) | 5)
+#define MT2701_PIN_207_PWM4__FUNC_DBG_MON_B_22 (MTK_PIN_NO(207) | 7)
+
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(208) | 1)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PWM0 (MTK_PIN_NO(208) | 2)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_ANT_SEL5 (MTK_PIN_NO(208) | 4)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DISP_PWM (MTK_PIN_NO(208) | 5)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_DBG_MON_A_31 (MTK_PIN_NO(208) | 7)
+#define MT2701_PIN_208_AUD_EXT_CK1__FUNC_PCIE0_PERST_N (MTK_PIN_NO(208) | 11)
+
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_GPIO209 (MTK_PIN_NO(209) | 0)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(209) | 1)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_MSDC1_WP (MTK_PIN_NO(209) | 2)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PWM1 (MTK_PIN_NO(209) | 5)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_DBG_MON_A_32 (MTK_PIN_NO(209) | 7)
+#define MT2701_PIN_209_AUD_EXT_CK2__FUNC_PCIE1_PERST_N (MTK_PIN_NO(209) | 11)
+
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_GPIO236 (MTK_PIN_NO(236) | 0)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3 (MTK_PIN_NO(236) | 1)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_IDDIG (MTK_PIN_NO(236) | 2)
+#define MT2701_PIN_236_EXT_SDIO3__FUNC_DBG_MON_A_1 (MTK_PIN_NO(236) | 7)
+
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_GPIO237 (MTK_PIN_NO(237) | 0)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2 (MTK_PIN_NO(237) | 1)
+#define MT2701_PIN_237_EXT_SDIO2__FUNC_DRV_VBUS (MTK_PIN_NO(237) | 2)
+
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_GPIO238 (MTK_PIN_NO(238) | 0)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1 (MTK_PIN_NO(238) | 1)
+#define MT2701_PIN_238_EXT_SDIO1__FUNC_IDDIG_P1 (MTK_PIN_NO(238) | 2)
+
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_GPIO239 (MTK_PIN_NO(239) | 0)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_EXT_SDIO0 (MTK_PIN_NO(239) | 1)
+#define MT2701_PIN_239_EXT_SDIO0__FUNC_DRV_VBUS_P1 (MTK_PIN_NO(239) | 2)
+
+#define MT2701_PIN_240_EXT_XCS__FUNC_GPIO240 (MTK_PIN_NO(240) | 0)
+#define MT2701_PIN_240_EXT_XCS__FUNC_EXT_XCS (MTK_PIN_NO(240) | 1)
+
+#define MT2701_PIN_241_EXT_SCK__FUNC_GPIO241 (MTK_PIN_NO(241) | 0)
+#define MT2701_PIN_241_EXT_SCK__FUNC_EXT_SCK (MTK_PIN_NO(241) | 1)
+
+#define MT2701_PIN_242_URTS2__FUNC_GPIO242 (MTK_PIN_NO(242) | 0)
+#define MT2701_PIN_242_URTS2__FUNC_URTS2 (MTK_PIN_NO(242) | 1)
+#define MT2701_PIN_242_URTS2__FUNC_UTXD3 (MTK_PIN_NO(242) | 2)
+#define MT2701_PIN_242_URTS2__FUNC_URXD3 (MTK_PIN_NO(242) | 3)
+#define MT2701_PIN_242_URTS2__FUNC_SCL1 (MTK_PIN_NO(242) | 4)
+#define MT2701_PIN_242_URTS2__FUNC_DBG_MON_B_32 (MTK_PIN_NO(242) | 7)
+
+#define MT2701_PIN_243_UCTS2__FUNC_GPIO243 (MTK_PIN_NO(243) | 0)
+#define MT2701_PIN_243_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(243) | 1)
+#define MT2701_PIN_243_UCTS2__FUNC_URXD3 (MTK_PIN_NO(243) | 2)
+#define MT2701_PIN_243_UCTS2__FUNC_UTXD3 (MTK_PIN_NO(243) | 3)
+#define MT2701_PIN_243_UCTS2__FUNC_SDA1 (MTK_PIN_NO(243) | 4)
+#define MT2701_PIN_243_UCTS2__FUNC_DBG_MON_A_6 (MTK_PIN_NO(243) | 7)
+
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_GPIO244 (MTK_PIN_NO(244) | 0)
+#define MT2701_PIN_244_HDMI_SDA_RX__FUNC_HDMI_SDA_RX (MTK_PIN_NO(244) | 1)
+
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_GPIO245 (MTK_PIN_NO(245) | 0)
+#define MT2701_PIN_245_HDMI_SCL_RX__FUNC_HDMI_SCL_RX (MTK_PIN_NO(245) | 1)
+
+#define MT2701_PIN_246_MHL_SENCE__FUNC_GPIO246 (MTK_PIN_NO(246) | 0)
+
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_GPIO247 (MTK_PIN_NO(247) | 0)
+#define MT2701_PIN_247_HDMI_HPD_CBUS_RX__FUNC_HDMI_HPD_RX (MTK_PIN_NO(247) | 1)
+
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_GPIO248 (MTK_PIN_NO(248) | 0)
+#define MT2701_PIN_248_HDMI_TESTOUTP_RX__FUNC_HDMI_TESTOUTP_RX (MTK_PIN_NO(248) | 1)
+
+#define MT2701_PIN_249_MSDC0E_RSTB__FUNC_MSDC0E_RSTB (MTK_PIN_NO(249) | 9)
+
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_MSDC3_DAT7 (MTK_PIN_NO(250) | 9)
+#define MT2701_PIN_250_MSDC0E_DAT7__FUNC_PCIE0_CLKREQ_N (MTK_PIN_NO(250) | 14)
+
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_MSDC3_DAT6 (MTK_PIN_NO(251) | 9)
+#define MT2701_PIN_251_MSDC0E_DAT6__FUNC_PCIE0_WAKE_N (MTK_PIN_NO(251) | 14)
+
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_MSDC3_DAT5 (MTK_PIN_NO(252) | 9)
+#define MT2701_PIN_252_MSDC0E_DAT5__FUNC_PCIE1_CLKREQ_N (MTK_PIN_NO(252) | 14)
+
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_MSDC3_DAT4 (MTK_PIN_NO(253) | 9)
+#define MT2701_PIN_253_MSDC0E_DAT4__FUNC_PCIE1_WAKE_N (MTK_PIN_NO(253) | 14)
+
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(254) | 9)
+#define MT2701_PIN_254_MSDC0E_DAT3__FUNC_PCIE2_CLKREQ_N (MTK_PIN_NO(254) | 14)
+
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(255) | 9)
+#define MT2701_PIN_255_MSDC0E_DAT2__FUNC_PCIE2_WAKE_N (MTK_PIN_NO(255) | 14)
+
+#define MT2701_PIN_256_MSDC0E_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(256) | 9)
+
+#define MT2701_PIN_257_MSDC0E_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(257) | 9)
+
+#define MT2701_PIN_258_MSDC0E_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(258) | 9)
+
+#define MT2701_PIN_259_MSDC0E_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(259) | 9)
+
+#define MT2701_PIN_260_MSDC0E_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(260) | 9)
+
+#define MT2701_PIN_261_MSDC1_INS__FUNC_GPIO261 (MTK_PIN_NO(261) | 0)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_MSDC1_INS (MTK_PIN_NO(261) | 1)
+#define MT2701_PIN_261_MSDC1_INS__FUNC_DBG_MON_B_29 (MTK_PIN_NO(261) | 7)
+
+#define MT2701_PIN_262_G2_TXEN__FUNC_GPIO262 (MTK_PIN_NO(262) | 0)
+#define MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN (MTK_PIN_NO(262) | 1)
+
+#define MT2701_PIN_263_G2_TXD3__FUNC_GPIO263 (MTK_PIN_NO(263) | 0)
+#define MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3 (MTK_PIN_NO(263) | 1)
+#define MT2701_PIN_263_G2_TXD3__FUNC_ANT_SEL5 (MTK_PIN_NO(263) | 6)
+
+#define MT2701_PIN_264_G2_TXD2__FUNC_GPIO264 (MTK_PIN_NO(264) | 0)
+#define MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2 (MTK_PIN_NO(264) | 1)
+#define MT2701_PIN_264_G2_TXD2__FUNC_ANT_SEL4 (MTK_PIN_NO(264) | 6)
+
+#define MT2701_PIN_265_G2_TXD1__FUNC_GPIO265 (MTK_PIN_NO(265) | 0)
+#define MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1 (MTK_PIN_NO(265) | 1)
+#define MT2701_PIN_265_G2_TXD1__FUNC_ANT_SEL3 (MTK_PIN_NO(265) | 6)
+
+#define MT2701_PIN_266_G2_TXD0__FUNC_GPIO266 (MTK_PIN_NO(266) | 0)
+#define MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0 (MTK_PIN_NO(266) | 1)
+#define MT2701_PIN_266_G2_TXD0__FUNC_ANT_SEL2 (MTK_PIN_NO(266) | 6)
+
+#define MT2701_PIN_267_G2_TXC__FUNC_GPIO267 (MTK_PIN_NO(267) | 0)
+#define MT2701_PIN_267_G2_TXC__FUNC_G2_TXC (MTK_PIN_NO(267) | 1)
+
+#define MT2701_PIN_268_G2_RXC__FUNC_GPIO268 (MTK_PIN_NO(268) | 0)
+#define MT2701_PIN_268_G2_RXC__FUNC_G2_RXC (MTK_PIN_NO(268) | 1)
+
+#define MT2701_PIN_269_G2_RXD0__FUNC_GPIO269 (MTK_PIN_NO(269) | 0)
+#define MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0 (MTK_PIN_NO(269) | 1)
+
+#define MT2701_PIN_270_G2_RXD1__FUNC_GPIO270 (MTK_PIN_NO(270) | 0)
+#define MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1 (MTK_PIN_NO(270) | 1)
+
+#define MT2701_PIN_271_G2_RXD2__FUNC_GPIO271 (MTK_PIN_NO(271) | 0)
+#define MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2 (MTK_PIN_NO(271) | 1)
+
+#define MT2701_PIN_272_G2_RXD3__FUNC_GPIO272 (MTK_PIN_NO(272) | 0)
+#define MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3 (MTK_PIN_NO(272) | 1)
+
+#define MT2701_PIN_274_G2_RXDV__FUNC_GPIO274 (MTK_PIN_NO(274) | 0)
+#define MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV (MTK_PIN_NO(274) | 1)
+
+#define MT2701_PIN_275_MDC__FUNC_GPIO275 (MTK_PIN_NO(275) | 0)
+#define MT2701_PIN_275_MDC__FUNC_MDC (MTK_PIN_NO(275) | 1)
+#define MT2701_PIN_275_MDC__FUNC_ANT_SEL0 (MTK_PIN_NO(275) | 6)
+
+#define MT2701_PIN_276_MDIO__FUNC_GPIO276 (MTK_PIN_NO(276) | 0)
+#define MT2701_PIN_276_MDIO__FUNC_MDIO (MTK_PIN_NO(276) | 1)
+#define MT2701_PIN_276_MDIO__FUNC_ANT_SEL1 (MTK_PIN_NO(276) | 6)
+
+#define MT2701_PIN_278_JTAG_RESET__FUNC_GPIO278 (MTK_PIN_NO(278) | 0)
+#define MT2701_PIN_278_JTAG_RESET__FUNC_JTAG_RESET (MTK_PIN_NO(278) | 1)
+
+#endif /* __DTS_MT2701_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
new file mode 100644
index 000000000000..83437683aa60
--- /dev/null
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Erin.Lo <erin.lo@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "mediatek,mt2701";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt2701-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt2701-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt2701-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x1000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt2701-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt7623-evb.dts b/arch/arm/boot/dts/mt7623-evb.dts
new file mode 100644
index 000000000000..a9ee2d64c6f7
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623-evb.dts
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt7623.dtsi"
+
+/ {
+	model = "MediaTek MT7623 evaluation board";
+	compatible = "mediatek,mt7623-evb", "mediatek,mt7623";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
new file mode 100644
index 000000000000..fd2b614ae6f3
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: John Crispin <blogic@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "mediatek,mt7623";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "mediatek,mt6589-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt7623-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0 0x10007000 0 0x100>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt7623-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0 0x10008000 0 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt7623-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10212000 0 0x1000>,
+		      <0 0x10214000 0 0x2000>,
+		      <0 0x10216000 0 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11002000 0 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11003000 0 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11004000 0 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt7623-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0 0x11005000 0 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index ca3402e8240b..52086c8018e2 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -23,6 +23,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -47,6 +48,17 @@
 
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -72,6 +84,21 @@
                 };
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts
index 357a91fc2d1d..460db6d05952 100644
--- a/arch/arm/boot/dts/mt8135-evbp1.dts
+++ b/arch/arm/boot/dts/mt8135-evbp1.dts
@@ -32,7 +32,6 @@
 			compatible = "mediatek,mt6397-regulator";
 
 			mt6397_vpca15_reg: buck_vpca15 {
-				regulator-compatible = "buck_vpca15";
 				regulator-name = "vpca15";
 				regulator-min-microvolt = < 850000>;
 				regulator-max-microvolt = <1350000>;
@@ -41,7 +40,6 @@
 			};
 
 			mt6397_vpca7_reg: buck_vpca7 {
-				regulator-compatible = "buck_vpca7";
 				regulator-name = "vpca7";
 				regulator-min-microvolt = < 850000>;
 				regulator-max-microvolt = <1350000>;
@@ -50,7 +48,6 @@
 			};
 
 			mt6397_vsramca15_reg: buck_vsramca15 {
-				regulator-compatible = "buck_vsramca15";
 				regulator-name = "vsramca15";
 				regulator-min-microvolt = < 850000>;
 				regulator-max-microvolt = <1350000>;
@@ -59,7 +56,6 @@
 			};
 
 			mt6397_vsramca7_reg: buck_vsramca7 {
-				regulator-compatible = "buck_vsramca7";
 				regulator-name = "vsramca7";
 				regulator-min-microvolt = < 850000>;
 				regulator-max-microvolt = <1350000>;
@@ -68,7 +64,6 @@
 			};
 
 			mt6397_vcore_reg: buck_vcore {
-				regulator-compatible = "buck_vcore";
 				regulator-name = "vcore";
 				regulator-min-microvolt = < 850000>;
 				regulator-max-microvolt = <1350000>;
@@ -77,7 +72,6 @@
 			};
 
 			mt6397_vgpu_reg: buck_vgpu {
-				regulator-compatible = "buck_vgpu";
 				regulator-name = "vgpu";
 				regulator-min-microvolt = < 700000>;
 				regulator-max-microvolt = <1350000>;
@@ -86,7 +80,6 @@
 			};
 
 			mt6397_vdrm_reg: buck_vdrm {
-				regulator-compatible = "buck_vdrm";
 				regulator-name = "vdrm";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1400000>;
@@ -95,7 +88,6 @@
 			};
 
 			mt6397_vio18_reg: buck_vio18 {
-				regulator-compatible = "buck_vio18";
 				regulator-name = "vio18";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <1980000>;
@@ -104,19 +96,16 @@
 			};
 
 			mt6397_vtcxo_reg: ldo_vtcxo {
-				regulator-compatible = "ldo_vtcxo";
 				regulator-name = "vtcxo";
 				regulator-always-on;
 			};
 
 			mt6397_va28_reg: ldo_va28 {
-				regulator-compatible = "ldo_va28";
 				regulator-name = "va28";
 				regulator-always-on;
 			};
 
 			mt6397_vcama_reg: ldo_vcama {
-				regulator-compatible = "ldo_vcama";
 				regulator-name = "vcama";
 				regulator-min-microvolt = <1500000>;
 				regulator-max-microvolt = <2800000>;
@@ -124,18 +113,15 @@
 			};
 
 			mt6397_vio28_reg: ldo_vio28 {
-				regulator-compatible = "ldo_vio28";
 				regulator-name = "vio28";
 				regulator-always-on;
 			};
 
 			mt6397_vusb_reg: ldo_vusb {
-				regulator-compatible = "ldo_vusb";
 				regulator-name = "vusb";
 			};
 
 			mt6397_vmc_reg: ldo_vmc {
-				regulator-compatible = "ldo_vmc";
 				regulator-name = "vmc";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -143,7 +129,6 @@
 			};
 
 			mt6397_vmch_reg: ldo_vmch {
-				regulator-compatible = "ldo_vmch";
 				regulator-name = "vmch";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -151,7 +136,6 @@
 			};
 
 			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
-				regulator-compatible = "ldo_vemc3v3";
 				regulator-name = "vemc_3v3";
 				regulator-min-microvolt = <3000000>;
 				regulator-max-microvolt = <3300000>;
@@ -159,7 +143,6 @@
 			};
 
 			mt6397_vgp1_reg: ldo_vgp1 {
-				regulator-compatible = "ldo_vgp1";
 				regulator-name = "vcamd";
 				regulator-min-microvolt = <1220000>;
 				regulator-max-microvolt = <3300000>;
@@ -167,7 +150,6 @@
 			};
 
 			mt6397_vgp2_reg: ldo_vgp2 {
-				regulator-compatible = "ldo_vgp2";
 				regulator-name = "vcamio";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
@@ -175,7 +157,6 @@
 			};
 
 			mt6397_vgp3_reg: ldo_vgp3 {
-				regulator-compatible = "ldo_vgp3";
 				regulator-name = "vcamaf";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -183,7 +164,6 @@
 			};
 
 			mt6397_vgp4_reg: ldo_vgp4 {
-				regulator-compatible = "ldo_vgp4";
 				regulator-name = "vgp4";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -191,7 +171,6 @@
 			};
 
 			mt6397_vgp5_reg: ldo_vgp5 {
-				regulator-compatible = "ldo_vgp5";
 				regulator-name = "vgp5";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3000000>;
@@ -199,7 +178,6 @@
 			};
 
 			mt6397_vgp6_reg: ldo_vgp6 {
-				regulator-compatible = "ldo_vgp6";
 				regulator-name = "vgp6";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3300000>;
@@ -207,7 +185,6 @@
 			};
 
 			mt6397_vibr_reg: ldo_vibr {
-				regulator-compatible = "ldo_vibr";
 				regulator-name = "vibr";
 				regulator-min-microvolt = <1300000>;
 				regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 08371dbae543..1d7f92bdcb9c 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -15,7 +15,7 @@
 #include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/reset-controller/mt8135-resets.h>
+#include <dt-bindings/reset/mt8135-resets.h>
 #include "skeleton64.dtsi"
 #include "mt8135-pinfunc.h"
 
@@ -46,6 +46,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "mediatek,mt81xx-tz-smp";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -72,6 +73,17 @@
 		};
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		trustzone-bootinfo@80002000 {
+			compatible = "mediatek,trustzone-bootinfo";
+			reg = <0 0x80002000 0 0x1000>;
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -97,6 +109,21 @@
 		};
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
 	soc {
 		#address-cells = <2>;
 		#size-cells = <2>;
diff --git a/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
new file mode 100644
index 000000000000..e211a3c47a76
--- /dev/null
+++ b/arch/arm/boot/dts/mvebu-linkstation-fan.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree common file for gpio-fan on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+
+		gpio-fan,speed-map =
+			<0		3
+			1500	2
+			3250	1
+			5000	0>;
+	};
+};
+
+&pinctrl {
+	pmx_fan_low: pmx-fan-low {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_high: pmx-fan-high {
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
new file mode 100644
index 000000000000..68d75e79a360
--- /dev/null
+++ b/arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_switch>;
+		pinctrl-names = "default";
+
+		power-on-switch {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+		};
+
+		power-auto-switch {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "linkstation:blue:power";
+			default-state = "keep";
+		};
+
+		red-alarm-led {
+			label = "linkstation:red:alarm";
+		};
+
+		amber-info-led {
+			label = "linkstation:amber:info";
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_switch: pmx-power-switch {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 390c91aea16d..ee5a0bb22354 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -16,7 +16,7 @@
 
 	cpus {
 		cpu@0 {
-			compatible = "arm,arm926ejs";
+			compatible = "arm,arm926ej-s";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index c9f1e93a95ae..8491f46c61b7 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -9,9 +9,9 @@
 	ocp {
 		i2c@0 {
 			compatible = "i2c-cbus-gpio";
-			gpios = <&gpio3 2 0 /* gpio66 clk */
-				 &gpio3 1 0 /* gpio65 dat */
-				 &gpio3 0 0 /* gpio64 sel */
+			gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+				 &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+				 &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
 				>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 7c4dca122a91..01e1e2d5c735 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -69,7 +69,7 @@
 			label = "user";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x114>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
@@ -80,7 +80,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
@@ -176,18 +176,18 @@
 &omap3_pmx_wkup {
 	gpio1_pins: pinmux_gpio1_pins {
 		pinctrl-single,pins = <
-			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
 		>;
 	};
 
 	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
 		>;
 	};
 };
@@ -200,8 +200,8 @@
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 67659a0ed13e..4602866792be 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -55,7 +55,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
@@ -80,7 +80,7 @@
 			label = "user";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x114>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
@@ -171,7 +171,7 @@
 &omap3_pmx_wkup {
 	gpio1_pins: pinmux_gpio1_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
 		>;
 	};
 };
@@ -195,47 +195,47 @@
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
 	};
 };
@@ -384,8 +384,11 @@
 
 	/* Chip select 0 */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* NAND I/O window, 4 bytes */
-		interrupts = <20>;
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		ti,nand-ecc-opt = "ham1";
 		nand-bus-width = <16>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 4d091ca43e25..a8127bc31fd9 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -224,7 +224,7 @@
 
 		interrupt-parent = <&gpio2>;
 		interrupts = <25 0>;		/* gpio_57 */
-		pendown-gpio = <&gpio2 25 0>;
+		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -238,7 +238,7 @@
 		ti,debounce-tol = /bits/ 16 <10>;
 		ti,debounce-rep = /bits/ 16 <1>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -261,10 +261,14 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
 		ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 9ca2865a83d6..b1b8ebf90c1c 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -64,7 +64,7 @@
 			label = "user";
 			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			linux,code = <BTN_EXTRA>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -204,7 +204,11 @@
 	ranges = <0 0 0x30000000 0x1000000>;       /* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index e84184de2a4a..738910db5c0c 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <27 0>;		/* gpio_27 */
-		pendown-gpio = <&gpio1 27 0>;
+		pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -68,6 +68,6 @@
 		ti,keep-vref-on = <1>;
 		ti,settle-delay-usec = /bits/ 16 <150>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index bb339d1648e0..76056ba92ced 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -66,48 +66,48 @@
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
 		>;
 	};
 
 	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
-			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
 		>;
 	};
 
 	smsc911x_pins: pinmux_smsc911x_pins {
 		pinctrl-single,pins = <
-			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
 };
@@ -115,12 +115,12 @@
 &omap3_pmx_wkup {
 	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
 		pinctrl-single,pins = <
-			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
-			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
-			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
-			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
-			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
-			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
 		>;
 	};
 };
@@ -154,12 +154,16 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x1000000>,	/* CS0: 16MB for NAND */
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0: 16MB for NAND */
 		 <5 0 0x2c000000 0x01000000>;
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "hynix,h8kds0un0mer-4em";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index b2589f96d5f7..090475083c2f 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -26,7 +26,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio5 22 0>;	/* gpio150 */
+		gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio150 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 		vin-supply = <&vmmc2>;
@@ -91,7 +91,7 @@
 	tsc2046@0 {
 		interrupt-parent = <&gpio6>;
 		interrupts = <15 0>;		/* gpio175 */
-		pendown-gpio = <&gpio6 15 0>;
+		pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7166d8876ea8..ab9fb8f49ff3 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -37,7 +37,7 @@
 			label = "aux";
 			linux,code = <169>;
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -77,10 +77,10 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi_gpio_pins>;
 
-		gpio-sck = <&gpio1 12 0>;
-		gpio-miso = <&gpio1 18 0>;
-		gpio-mosi = <&gpio1 20 0>;
-		cs-gpios = <&gpio1 19 0>;
+		gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
 		/* lcd panel */
@@ -118,7 +118,7 @@
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 0>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 
 		ports {
 			#address-cells = <1>;
@@ -492,7 +492,11 @@
 	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
 
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index 52b386f6865b..600b6ca5a1bd 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -12,6 +12,6 @@
 	model = "Goldelico GTA04A5";
 
 	sound {
-		ti,jack-det-gpio = <&twl_gpio 2 0>;    /* GTA04A5 only */
+		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;    /* GTA04A5 only */
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 2230e1c03320..41f5d386f21f 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -1,7 +1,7 @@
 /*
  * Common device tree for IGEP boards based on AM/DM37x
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -18,6 +18,10 @@
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
+	chosen {
+		stdout-path = &uart3;
+	};
+
 	sound {
 		compatible = "ti,omap-twl4030";
 		ti,model = "igep2";
@@ -35,68 +39,72 @@
 &omap3_pmx_core {
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
-			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)	/* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)	/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx.uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx.uart3_tx */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
-			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
-			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
-			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
 		>;
 	};
 };
 
 &gpmc {
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "micron,mt29c4g96maz";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
@@ -155,7 +163,7 @@
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
-			      };
+			};
 		};
 	};
 };
@@ -175,11 +183,11 @@
 };
 
 &mmc1 {
-      pinctrl-names = "default";
-      pinctrl-0 = <&mmc1_pins>;
-      vmmc-supply = <&vmmc1>;
-      vmmc_aux-supply = <&vsim>;
-      bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
 };
 
 &mmc3 {
@@ -187,13 +195,13 @@
 };
 
 &uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
 };
 
 &twl_gpio {
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index 5ad688c57a00..d6f839cab649 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -1,7 +1,7 @@
 /*
  * Common Device Tree Source for IGEPv2
  *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -111,40 +111,40 @@
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
-			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
-			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
-			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
-			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
-			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
-			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
-			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
-			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
-			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
-			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
-			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
-			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
-			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
-			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
-			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
-			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
-			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
 	};
 
@@ -210,8 +210,8 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x20000000>,
-		 <5 0 0x2c000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x01000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;	/* CS5: 16MB for ethernet */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 72f7cdc091fb..321c2b7a4e9f 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index fea7f7edb45d..33d6b4ead092 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -15,25 +15,17 @@
 	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
 
-	/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
-	lbee1usjyc_pdn: lbee1usjyc_pdn {
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-pdn";
+		regulator-name = "vmmcsdio_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 - WIFI_PDN */
-		startup-delay-us = <10000>;
-		enable-active-high;
 	};
 
-	/* Regulator to trigger the RESET_N_W signal of the Wifi module */
-	lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-reset-n-w";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 - RESET_N_W */
-		enable-active-high;
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
+			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
 	};
 };
 
@@ -45,23 +37,14 @@
 			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
 		>;
 	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
-			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
-			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
-		>;
-	};
 };
 
 /* On board Wifi module */
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
-	vmmc-supply = <&lbee1usjyc_pdn>;
-	vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 };
diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
index 0cb1527c39d4..e94d9427450c 100644
--- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi
@@ -1,7 +1,7 @@
 /*
  * Common Device Tree Source for IGEP COM MODULE
  *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -33,9 +33,28 @@
 			 default-state = "off";
 		};
 	};
+
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;		/* gpio_54 */
+	};
 };
 
 &omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_pins>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
@@ -47,6 +66,20 @@
 };
 
 &omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb2_core2_pins>;
+
+	hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		      /* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		      /* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
 	leds_core2_pins: pinmux_leds_core2_pins {
 		pinctrl-single,pins = <
 			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)	/* etk_d2.gpio_16 */
@@ -54,7 +87,19 @@
 	};
 };
 
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins>;
 };
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x01000000>;   /* CS0: 16MB for NAND */
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index b899e341874a..76dc08868bfb 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 8150f47ccdf5..55b0cc4f5ee5 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
  *
- * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -15,25 +15,17 @@
 	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
 
-	/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
-	lbee1usjyc_pdn: lbee1usjyc_pdn {
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
 		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-pdn";
+		regulator-name = "vmmcsdio_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 - WIFI_PDN */
-		startup-delay-us = <10000>;
-		enable-active-high;
 	};
 
-	/* Regulator to trigger the RESET_N_W signal of the Wifi module */
-	lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
-		compatible = "regulator-fixed";
-		regulator-name = "regulator-lbee1usjyc-reset-n-w";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 - RESET_N_W */
-		enable-active-high;
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>,	/* gpio_139 - RESET_N_W */
+			      <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 - WIFI_PDN */
 	};
 };
 
@@ -62,8 +54,8 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
-	vmmc-supply = <&lbee1usjyc_pdn>;
-	vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
 	bus-width = <4>;
 	non-removable;
 };
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index bd6e6769c7ce..2f353dadfa40 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -35,74 +35,78 @@
 			label = "enter";
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
 			linux,code = <KEY_ENTER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f1 {
 			label = "f1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
 			linux,code = <KEY_F1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f2 {
 			label = "f2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
 			linux,code = <KEY_F2>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f3 {
 			label = "f3";
 			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
 			linux,code = <KEY_F3>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_f4 {
 			label = "f4";
 			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
 			linux,code = <KEY_F4>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_left {
 			label = "left";
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
 			linux,code = <KEY_LEFT>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_right {
 			label = "right";
 			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
 			linux,code = <KEY_RIGHT>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_up {
 			label = "up";
 			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		key_down {
 			label = "down";
 			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x01000000>,
-		 <1 0 0x08000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x1000000>,	/* CS0 space, 16MB */
+		 <1 0 0x08000000 0x1000000>;	/* CS1 space, 16MB */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "micron,nand";
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
@@ -200,7 +204,7 @@
 	tsc2046@0 {
 		interrupt-parent = <&gpio2>;
 		interrupts = <22 0>;		/* gpio54 */
-		pendown-gpio = <&gpio2 22 0>;
+		pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -224,32 +228,32 @@
 &omap3_pmx_core {
 	gpio_key_pins: pinmux_gpio_key_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
-			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
-			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
-			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
-			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
-			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
-			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
-			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
-			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
 		>;
 	};
 
 	musb_pins: pinmux_musb_pins {
 		pinctrl-single,pins = <
-			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
-			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
-			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
-			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
-			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
-			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
-			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
-			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
-			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
-			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
-			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
-			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index d0dd0365bfda..eff816e0bc0a 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -284,7 +284,7 @@
 };
 
 &mmc1 {
-	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+	cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
 	cd-inverted;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
@@ -314,7 +314,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 0>;   /* boot6 / gpio_8 */
 		spi-max-frequency = <1000000>;
-		pendown-gpio = <&gpio1 8 0>;
+		pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&reg_vcc3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tsc2048_pins>;
@@ -327,7 +327,7 @@
 		ti,pressure-max = /bits/ 16 <255>;
 		ti,swap-xy;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
@@ -362,7 +362,11 @@
 		<7 0 0x15000000 0x01000000>;
 
 	nand@0,0 {
-		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "bch8";
 		/* no elm on omap3 */
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
index 834f7c65f62d..0e3c9812f4e3 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -114,8 +114,8 @@
 	status = "okay";
 	bus-width = <4>;
 	vmmc-supply = <&vmmc1>;
-	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
-	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
+	cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;   /* gpio_164 */
+	wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;   /* gpio_163 */
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	ti,dual-volt;
diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts
index f2e213931e09..5c67429a4da7 100644
--- a/arch/arm/boot/dts/omap3-n9.dts
+++ b/arch/arm/boot/dts/omap3-n9.dts
@@ -53,3 +53,7 @@
 		};
 	};
 };
+
+&modem {
+	compatible = "nokia,n9-modem";
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 5f5e0f3d5b64..b3c26a96a726 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -65,50 +65,51 @@
 		camera_lens_cover {
 			label = "Camera Lens Cover";
 			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
-			gpio-key,wakeup;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_CAMERA_LENS_COVER>;
+			linux,can-disable;
 		};
 
 		camera_focus {
 			label = "Camera Focus";
 			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
-			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
-			gpio-key,wakeup;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			linux,can-disable;
 		};
 
 		camera_capture {
 			label = "Camera Capture";
 			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
-			linux,code = <0xd4>; /* KEY_CAMERA */
-			gpio-key,wakeup;
+			linux,code = <KEY_CAMERA>;
+			linux,can-disable;
 		};
 
 		lock_button {
 			label = "Lock Button";
 			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
-			linux,code = <0x98>; /* KEY_SCREENLOCK */
-			gpio-key,wakeup;
+			linux,code = <KEY_SCREENLOCK>;
+			linux,can-disable;
 		};
 
 		keypad_slide {
 			label = "Keypad Slide";
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
-			gpio-key,wakeup;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			linux,can-disable;
 		};
 
 		proximity_sensor {
 			label = "Proximity Sensor";
 			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_FRONT_PROXIMITY>;
+			linux,can-disable;
 		};
 	};
 
-	isp1704: isp1704 {
-		compatible = "nxp,isp1704";
+	isp1707: isp1707 {
+		compatible = "nxp,isp1707";
 		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 		usb-phy = <&usb2_phy>;
 	};
@@ -149,15 +150,15 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
-			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
-			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
 		>;
 	};
 
@@ -198,22 +199,22 @@
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x18a (PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
-			0x18c (PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x18e (PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
-			0x190 (PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x192 (PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
-			0x194 (PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
 		>;
 	};
 
@@ -225,85 +226,85 @@
 
 	mcspi4_pins: pinmux_mcspi4_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
-			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
-			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
-			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
-			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
-			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
 		>;
 	};
 
 	acx565akm_pins: pinmux_acx565akm_pins {
 		pinctrl-single,pins = <
-			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
 		>;
 	};
 
 	dss_sdi_pins: pinmux_dss_sdi_pins {
 		pinctrl-single,pins = <
-			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
-			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
-			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
-			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
 
-			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
-			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
 		>;
 	};
 
 	wl1251_pins: pinmux_wl1251 {
 		pinctrl-single,pins = <
-			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
-			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
 		>;
 	};
 
 	ssi_pins: pinmux_ssi {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
-			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
-			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
-			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
-			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
-			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
-			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
-			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
 		>;
 	};
 
 	modem_pins: pinmux_modem {
 		pinctrl-single,pins = <
-			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
-			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
-			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
-			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
-			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
-			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
 		>;
 	};
 };
@@ -522,6 +523,21 @@
 		amstaos,cover-comp-gain = <16>;
 	};
 
+	adp1653: led-controller@30 {
+		compatible = "adi,adp1653";
+		reg = <0x30>;
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+		flash {
+			flash-timeout-us = <500000>;
+			flash-max-microamp = <320000>;
+			led-max-microamp = <50000>;
+		};
+		indicator {
+			led-max-microamp = <17500>;
+		};
+	};
+
 	lp5523: lp5523@32 {
 		compatible = "national,lp5523";
 		reg = <0x32>;
@@ -618,7 +634,7 @@
 		ti,termination-current = <100>;
 		ti,resistor-sense = <68>;
 
-		ti,usb-charger-detection = <&isp1704>;
+		ti,usb-charger-detection = <&isp1707>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 800b379d368d..858a25048102 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -27,21 +27,78 @@
 		regulator-name = "VEMMC";
 		regulator-min-microvolt = <2900000>;
 		regulator-max-microvolt = <2900000>;
-		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
 		startup-delay-us = <150>;
 		enable-active-high;
 	};
+
+	vwlan_fixed: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VWLAN";
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
+		enable-active-high;
+		regulator-boot-off;
+	};
 };
 
 &omap3_pmx_core {
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
-			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
-			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
+			OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
+		>;
+	};
+
+	ssi_pins: pinmux_ssi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)            /* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)            /* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)      /* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)             /* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)             /* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)            /* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1)            /* ssi1_wake */
+		>;
+	};
+
+	ssi_pins_idle: pinmux_ssi_pins_idle {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7)            /* ssi1_dat_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7)            /* ssi1_flag_tx */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7)    /* ssi1_rdy_tx */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7)             /* ssi1_dat_rx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7)             /* ssi1_flag_rx */
+			OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4)            /* ssi1_rdy_rx */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7)            /* ssi1_wake */
+		>;
+	};
+
+	modem_pins1: pinmux_modem_core1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4)            /* gpio_88 (cmt_rst_rq) */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4)            /* gpio_93 (cmt_apeslpx) */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	modem_pins2: pinmux_modem_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)         /* gpio_23 (cmt_en) */
 		>;
 	};
 };
@@ -191,3 +248,39 @@
 		};
 	};
 };
+
+&ssi_port1 {
+	pinctrl-names = "default", "idle";
+	pinctrl-0 = <&ssi_pins>;
+	pinctrl-1 = <&ssi_pins_idle>;
+
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	modem: hsi-client {
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins1 &modem_pins2>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <96000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
+
+		gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
+			<&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
+			<&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts
index 0885b34d5d7d..7f219a9dc5be 100644
--- a/arch/arm/boot/dts/omap3-n950.dts
+++ b/arch/arm/boot/dts/omap3-n950.dts
@@ -17,6 +17,17 @@
 	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
 };
 
+&omap3_pmx_core {
+	spi4_pins: pinmux_spi4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+		>;
+	};
+};
+
 &i2c2 {
 	smia_1: camera@10 {
 		compatible = "nokia,smia";
@@ -53,3 +64,25 @@
 		};
 	};
 };
+
+&mcspi4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupts-extended = <&gpio2 10 IRQ_TYPE_LEVEL_HIGH>; /* gpio 42 */
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
+
+&modem {
+	compatible = "nokia,n950-modem";
+};
diff --git a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
index 7aae8fb82c1f..3b3a75997f81 100644
--- a/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-alto35-common.dtsi
@@ -48,7 +48,7 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 28430f1596f2..de256fa8da48 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -35,7 +35,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
+		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;		/* gpio_168: vbus enable */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
@@ -226,8 +226,12 @@
 	ranges = <0 0 0x00000000 0x20000000>;
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		linux,mtd-name= "micron,mt29c4g96maz";
-		reg = <0 0 0>;
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		ti,nand-ecc-opt = "bch8";
diff --git a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
index 17b82f82638a..7df27926ead2 100644
--- a/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-chestnut43-common.dtsi
@@ -41,13 +41,13 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 		button1@14 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 80d236ac64a5..6314da2580f5 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -152,7 +152,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -161,6 +161,6 @@
 		ti,x-plate-ohms = /bits/ 16 <180>;
 		ti,pressure-max = /bits/ 16 <255>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 048fd216970a..7e3fe85a8ad9 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -163,7 +163,7 @@
 
 		interrupt-parent = <&gpio4>;
 		interrupts = <18 0>;			/* gpio_114 */
-		pendown-gpio = <&gpio4 18 0>;
+		pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 
 		ti,x-min = /bits/ 16 <0x0>;
 		ti,x-max = /bits/ 16 <0x0fff>;
@@ -172,7 +172,7 @@
 		ti,x-plate-ohms = /bits/ 16 <180>;
 		ti,pressure-max = /bits/ 16 <255>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
index 49d2254a99b0..250cc7fe5d5e 100644
--- a/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-gallop43-common.dtsi
@@ -41,13 +41,13 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 		button1@14 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
index 680d7262399c..8df7ec35d17d 100644
--- a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi
@@ -41,13 +41,13 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 		button1@14 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
index 087aedf5b902..0ea2c451c809 100644
--- a/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-palo43-common.dtsi
@@ -41,13 +41,13 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 		button1@14 {
 			label = "button1";
 			linux,code = <BTN_1>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index f2084e6d01e7..bcf39d606b65 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -84,112 +84,112 @@
 			label = "up";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;	/* GPIO_110 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		down-button {
 			label = "down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;	/* GPIO_103 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left-button {
 			label = "left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;	/* GPIO_96 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right-button {
 			label = "right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;	/* GPIO_98 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		pageup-button {
 			label = "game 1";
 			linux,code = <KEY_PAGEUP>;
 			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;	/* GPIO_109 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		pagedown-button {
 			label = "game 3";
 			linux,code = <KEY_PAGEDOWN>;
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;	/* GPIO_106 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		home-button {
 			label = "game 4";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;	/* GPIO_101 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		end-button {
 			label = "game 2";
 			linux,code = <KEY_END>;
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;	/* GPIO_111 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right-shift {
 			label = "l";
 			linux,code = <KEY_RIGHTSHIFT>;
 			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;	/* GPIO_102 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		kp-plus {
 			label = "l2";
 			linux,code = <KEY_KPPLUS>;
 			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;	/* GPIO_97 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		right-ctrl {
 			label = "r";
 			linux,code = <KEY_RIGHTCTRL>;
 			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;	/* GPIO_105 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		kp-minus {
 			label = "r2";
 			linux,code = <KEY_KPMINUS>;
 			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;	/* GPIO_107 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left-ctrl {
 			label = "ctrl";
 			linux,code = <KEY_LEFTCTRL>;
 			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;	/* GPIO_104 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;	/* GPIO_99 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		hold {
 			label = "hold";
 			linux,code = <KEY_COFFEE>;
 			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* GPIO_176 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		left-alt {
 			label = "alt";
 			linux,code = <KEY_LEFTALT>;
 			gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;	/* GPIO_100 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid {
@@ -218,7 +218,7 @@
 		regulator-always-on;
 		regulator-boot-on;
 		enable-active-high;
-		gpio = <&gpio6 4 0>;	/* GPIO_164 */
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* GPIO_164 */
 	};
 
 	/* wg7210 (wifi+bt module) 32k clock buffer */
@@ -546,7 +546,11 @@
 	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		ti,nand-ecc-opt = "sw";
 
@@ -607,7 +611,7 @@
 		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <30 0>;	/* GPIO_94 */
-		pendown-gpio = <&gpio3 30 0>;
+		pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
 		vcc-supply = <&vaux4>;
 
 		ti,x-min = /bits/ 16 <0>;
@@ -617,7 +621,7 @@
 		ti,x-plate-ohms = /bits/ 16 <40>;
 		ti,pressure-max = /bits/ 16 <255>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 
 	lcd: lcd@1 {
diff --git a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
index f4b1a61853e3..157345bb8e79 100644
--- a/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
+++ b/arch/arm/boot/dts/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -66,6 +66,6 @@
 		ti,x-plate-ohms = /bits/ 16 <40>;
 		ti,pressure-max = /bits/ 16 <255>;
 		ti,swap-xy;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
new file mode 100644
index 000000000000..78a1184cb312
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-sniper.dts
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2015-2016 Paul Kocialkowski <contact@paulk.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "LG Optimus Black";
+	compatible = "lg,omap3-sniper", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
+		>;
+	};
+
+	dp3t_sel_pins: pinmux_dp3t_sel_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4)	/* gpio_161 */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* gpio_162 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	lp8720_en_pin: pinmux_lp8720_en_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4)	/* gpio_37 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0)	/* sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
+	usb_otg_hs_pins: pinmux_usb_otg_hs_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)	/* hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)	/* hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)	/* hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)	/* hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)	/* hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)	/* hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)	/* hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)	/* hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	mmc1_cd_pin: pinmux_mmc1_cd_pin {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4)		/* gpio_10 */
+		>;
+	};
+};
+
+&gpio2 {
+	ti,no-reset-on-init;
+};
+
+&gpio5 {
+	ti,no-reset-on-init;
+};
+
+&gpio6 {
+	ti,no-reset-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
+
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	lp8720@7d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp8720_en_pin>;
+
+		compatible = "ti,lp8720";
+		reg = <0x7d>;
+
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
+
+		lp8720_ldo1: ldo1 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
+
+	vmmc-supply = <&lp8720_ldo1>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_otg_hs_pins>;
+
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl_keypad {
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x00, KEY_VOLUMEUP)
+		MATRIX_KEY(0x01, 0x00, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x02, 0x00, KEY_SELECT)
+	>;
+};
+
+/*
+ * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
+ * When not powered, these sensors cause the I2C3 clock to stay low at all times,
+ * making it impossible to reach other devices on I2C3.
+ */
+
+&vaux2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&vdac {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 7bd8d9a4f67f..644d3c8ea66a 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -37,7 +37,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
@@ -225,7 +225,7 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
-	cd-gpios = <&twl_gpio 0 0>;
+	cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 };
 
@@ -275,10 +275,14 @@
 };
 
 &gpmc {
-	ranges = <0 0 0x00000000 0x01000000>;
+	ranges = <0 0 0x30000000 0x01000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;	/* GPMC_DEVWIDTH_16BIT */
 		ti,nand-ecc-opt = "sw";
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 131448d86e67..f19170bdcc1f 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -44,7 +44,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio4 5 0>;	/* gpio101 */
+		gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
@@ -54,27 +54,27 @@
 	/* REVISIT: twl gpio0 is mmc0_cd */
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
-			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
-			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
-			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
-			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
-			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
-			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
-			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
-			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
-			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
-			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
-			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
-			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
-			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
 		>;
 	};
 
@@ -87,35 +87,35 @@
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
-                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
-                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
-                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+                        OMAP3_CORE1_IOPAD(0x2182, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
-                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+                        OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+                        OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+                        OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
-                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+                        OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+                        OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+                        OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
 		>;
 	};
 };
@@ -135,7 +135,7 @@
 &omap3_pmx_wkup {
 	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
 		pinctrl-single,pins = <
-			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 8a2b25332b8c..b41d07e8e765 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -717,10 +717,14 @@
 			ti,hwmods = "gpmc";
 			reg = <0x6e000000 0x02d0>;
 			interrupts = <20>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			#address-cells = <2>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		usb_otg_hs: usb_otg_hs@480ab000 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 16b0cdfbee9c..a0dc8d854142 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -103,10 +103,14 @@
 	};
 
 	nand@1,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
 		linux,mtd-name= "micron,mt29f1g08abb";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <1 0 4>;	/* CS1, offset 0, IO size 4 */
 		ti,nand-ecc-opt = "sw";
 		nand-bus-width = <8>;
 		gpmc,cs-on-ns = <0>;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 4f6b2d5b1902..387dc31822fe 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -54,6 +54,12 @@
 				#size-cells = <0>;
 			};
 		};
+
+		bandgap {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap34xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 86253de5a97a..f19c87bd6bf3 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -86,6 +86,12 @@
 				#size-cells = <0>;
 			};
 		};
+
+		bandgap {
+			reg = <0x48002524 0x4>;
+			compatible = "ti,omap36xx-bandgap";
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 1a78f013f37a..06c54822ddc2 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -36,7 +36,7 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -189,3 +189,7 @@
 	};
 };
 
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
index 133f1b74e8ae..78d363177762 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -13,8 +13,8 @@
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index f1507bc8737e..df2e356ec089 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -68,7 +68,7 @@
 		regulator-name = "hsusb1_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 1 0>;	/* gpio_1 */
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;	/* gpio_1 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 		/*
@@ -98,7 +98,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
@@ -199,129 +199,129 @@
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	dss_dpi_pins: pinmux_dss_dpi_pins {
 		pinctrl-single,pins = <
-			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
-			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
-			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
-			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
-			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
-			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
-			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
-			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
-			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
-			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
-			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
-
-			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
-			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
-			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
-			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
-			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
-			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
-			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
-			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
-			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
-			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
-			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
-			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
-			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
-			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
-
-			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
-			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
-			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
 		>;
 	};
 
 	tfp410_pins: pinmux_tfp410_pins {
 		pinctrl-single,pins = <
-			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+			OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
 	hsusbb1_pins: pinmux_hsusbb1_pins {
 		pinctrl-single,pins = <
-			0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
-			0x84 (PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
-			0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
-			0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
-			0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
-			0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
-			0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
@@ -331,24 +331,24 @@
 	 */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
-			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
-			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
-			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
-			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };
@@ -356,8 +356,8 @@
 &omap4_pmx_wkup {
 	led_wkgpio_pins: pinmux_leds_wkpins {
 		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+			OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 2f1dabcc6adf..119f8e657edc 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -34,23 +34,23 @@
 /* PandaboardES has external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
 
 &omap4_pmx_core {
 	led_gpio_pins: gpio_led_pmx {
 		pinctrl-single,pins = <
-			0xb6 (PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
 		>;
 	};
 };
 
 &led_wkgpio_pins {
 	pinctrl-single,pins = <
-		0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 	>;
 };
 
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index aad5dda0f469..b4d19a7ae393 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -10,8 +10,8 @@
 /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
-		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index dac86ed7481f..aae513265dc2 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -30,7 +30,7 @@
 		regulator-name = "VDD_ETH";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;  /* gpio line 48 */
 		enable-active-high;
 		regulator-boot-on;
 	};
@@ -155,7 +155,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 22 0>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
@@ -212,143 +212,143 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
-			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
-			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
-			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
-			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
-			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
-			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	uart4_pins: pinmux_uart4_pins {
 		pinctrl-single,pins = <
-			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
-			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
+			OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
+			OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
 		>;
 	};
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
-			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+			OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
-			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
-			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
-			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
-			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	dmic_pins: pinmux_dmic_pins {
 		pinctrl-single,pins = <
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
-			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
-			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
-			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
+			OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
+			OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
+			OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
+			OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
-			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
-			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
-			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
-			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
-			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
-			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+			OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
+			OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
+			OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
-			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
-			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
-			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
-			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
-			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
-			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
-			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 
 	/* wl12xx GPIO output for WLAN_EN */
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+			OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
 		>;
 	};
 
 	/* wl12xx GPIO inputs and SDIO pins */
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
-			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };
@@ -374,7 +374,7 @@
 
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
 
 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
index f2d2fdb75628..6e278d7716a5 100644
--- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi
@@ -41,7 +41,7 @@
 			label = "user";
 			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
 			linux,code = <BTN_EXTRA>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index 9bceeb7e1f03..1c5f6f35e1cf 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -15,7 +15,7 @@
 		regulator-name = "vwl1271";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio2 11 0>;	/* gpio 43 */
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;	/* gpio 43 */
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index a4f1ba2e1903..49d032b846be 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -196,7 +196,7 @@
 
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
 		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+		ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
 
 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 5a206c100ce2..421fe9f8a9eb 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -70,7 +70,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		clocks = <&mpu_periphclk>;
 		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
 		interrupt-parent = <&gic>;
 	};
 
@@ -348,12 +348,22 @@
 			#interrupt-cells = <2>;
 		};
 
+		elm: elm@48078000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48078000 0x2000>;
+			interrupts = <4>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
 		gpmc: gpmc@50000000 {
 			compatible = "ti,omap4430-gpmc";
 			reg = <0x50000000 0x1000>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 194f9ef0a009..5fa68f191af7 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -46,7 +46,7 @@
 			       0x4a002378 0x18>;
 			compatible = "ti,omap4460-bandgap";
 			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-			gpios = <&gpio3 22 0>; /* tshut */
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
 
 			#thermal-sensor-cells = <0>;
 		};
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
new file mode 100644
index 000000000000..902657d6713b
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -0,0 +1,688 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	mmc3_pwrseq: sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&clk32kgaudio>;
+		clock-names = "ext_clock";
+	};
+
+	vmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsdio_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>;	/* gpio140 WLAN_EN */
+		enable-active-high;
+		startup-delay-us = <70000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+		clocks = <&auxclk1_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		/* gpios defined in the board specific dts */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "omap5-uevm";
+
+		ti,mclk-freq = <19200000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+};
+
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_pins
+			&led_gpio_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x182, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			OMAP5_IOPAD(0x19c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			OMAP5_IOPAD(0x19e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			OMAP5_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			OMAP5_IOPAD(0x1a2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x18c, PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			OMAP5_IOPAD(0x18e, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			OMAP5_IOPAD(0x190, PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			OMAP5_IOPAD(0x192, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x194, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			OMAP5_IOPAD(0x196, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			OMAP5_IOPAD(0x198, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			OMAP5_IOPAD(0x19a, PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1f2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP5_IOPAD(0x1f4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			OMAP5_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			OMAP5_IOPAD(0x100, PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			OMAP5_IOPAD(0x102, PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0b8, PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			OMAP5_IOPAD(0x0ba, PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			OMAP5_IOPAD(0x0bc, PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			OMAP5_IOPAD(0x0be, PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */
+		>;
+	};
+
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x0c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x1de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x1e0, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x0b0, PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			OMAP5_IOPAD(0x0ae, PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+		>;
+	};
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1d6, PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0a0, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a2, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			OMAP5_IOPAD(0x0a4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			OMAP5_IOPAD(0x0a6, PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1da, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			OMAP5_IOPAD(0x1dc, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+		>;
+	};
+
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1b0, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			OMAP5_IOPAD(0x1b2, PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			OMAP5_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			OMAP5_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP5_IOPAD(0x140, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP5_IOPAD(0x142, PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x13e, PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
+};
+
+&omap5_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_wkup_pins
+	>;
+
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+		>;
+	};
+
+	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+		>;
+	};
+
+	wlcore_irq_pin: pinmux_wlcore_irq_pin {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6)	/* llia_wakereqin.gpio1_wk14 */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	vmmc-supply = <&vmmcsdio_fixed>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>;
+	interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap5_pmx_core 0x168>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
+
+		clk32kgaudio: palmas_clk32k@1 {
+			compatible = "ti,palmas-clk32kgaudio";
+			#clock-cells = <0>;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-name = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2100000>;
+					ti,smps-range = <0x80>;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas_power_button: palmas_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&palmas>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
+		ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
+
+		vio-supply = <&smps7_reg>;
+		v2v1-supply = <&smps9_reg>;
+		enable-active-high;
+
+		clocks = <&clk32kgaudio>;
+		clock-names = "clk32k";
+	};
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			      <&omap5_pmx_core 0x19c>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+
+	/* vdda-supply populated in board specific dts file */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 61ad2ea34720..ecc591dc0778 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -175,7 +175,7 @@
 
 	ads7846_pins: pinmux_ads7846_pins {
 		pinctrl-single,pins = <
-			0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
 		>;
 	};
 };
@@ -344,7 +344,7 @@
 
 		interrupt-parent = <&gpio1>;
 		interrupts = <15 0>;			/* gpio1_wk15 */
-		pendown-gpio = <&gpio1 15 0>;
+		pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
 
 
 		ti,x-min = /bits/ 16 <0x0>;
@@ -359,7 +359,7 @@
 		ti,debounce-tol = /bits/ 16 <10>;
 		ti,debounce-rep = /bits/ 16 <1>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
new file mode 100644
index 000000000000..46ecb1dd3b5c
--- /dev/null
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap5-board-common.dtsi"
+
+/ {
+	model = "IGEPv5";
+	compatible = "isee,omap5-igep0050", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7f000000>; /* 2032 MB */
+	};
+};
+
+&hdmi {
+	vdda-supply = <&ldo7_reg>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	tca6416: tca6416@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&omap5_pmx_core {
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* i2c4_scl */
+			OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+};
+
+&tpd12s015 {
+	gpios = <&tca6416 11 0>,	/* TCA6416 P01, CT_CP_HDP */
+		<&tca6416 12 0>,	/* TCA6416 P00, LS_OE*/
+		<&gpio7 1 0>,		/* 193, HPD */
+		<&gpio7 2 0>,		/* 194, SCL */
+		<&gpio7 3 0>;		/* 195, SDA */
+};
+
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cb030f9d2c4..60b3fbb3bf07 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -7,9 +7,7 @@
  */
 /dts-v1/;
 
-#include "omap5.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "omap5-board-common.dtsi"
 
 / {
 	model = "TI OMAP5 uEVM board";
@@ -19,523 +17,10 @@
 		device_type = "memory";
 		reg = <0x80000000 0x7F000000>; /* 2032 MB */
 	};
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	vmmcsd_fixed: fixedregulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-	/* HS USB Host PHY on PORT 2 */
-	hsusb2_phy: hsusb2_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
-		clocks = <&auxclk1_ck>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-	};
-
-	/* HS USB Host PHY on PORT 3 */
-	hsusb3_phy: hsusb3_phy {
-		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@1 {
-			label = "omap5:blue:usr1";
-			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-	};
-
-	tpd12s015: encoder@0 {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
-			<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
-			<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@0 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "b";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	sound: sound {
-		compatible = "ti,abe-twl6040";
-		ti,model = "omap5-uevm";
-
-		ti,mclk-freq = <19200000>;
-
-		ti,mcpdm = <&mcpdm>;
-
-		ti,twl6040 = <&twl6040>;
-
-		/* Audio routing */
-		ti,audio-routing =
-			"Headset Stereophone", "HSOL",
-			"Headset Stereophone", "HSOR",
-			"Line Out", "AUXL",
-			"Line Out", "AUXR",
-			"HSMIC", "Headset Mic",
-			"Headset Mic", "Headset Mic Bias",
-			"AFML", "Line In",
-			"AFMR", "Line In";
-	};
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_pins
-			&led_gpio_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
-			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
-			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
-			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
-			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
-			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
-			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
-			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
-			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
-			0x188 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
-			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
-			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
-		>;
-	};
-
-	mcspi3_pins: pinmux_mcspi3_pins {
-		pinctrl-single,pins = <
-			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
-			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
-			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
-			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
-			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
-			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
-			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
-		>;
-	};
-
-	usbhost_pins: pinmux_usbhost_pins {
-		pinctrl-single,pins = <
-			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
-			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
-
-			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
-			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
-
-			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
-			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
-		>;
-	};
-
-	led_gpio_pins: pinmux_led_gpio_pins {
-		pinctrl-single,pins = <
-			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
-			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
-			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
-			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
-		>;
-	};
-
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
-			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
-			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
-			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
-		>;
-	};
-
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
-		pinctrl-single,pins = <
-			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
-			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
-			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
-		>;
-	};
-};
-
-&omap5_pmx_wkup {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&usbhost_wkup_pins
-	>;
-
-	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
-		pinctrl-single,pins = <
-			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&ldo9_reg>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
 };
 
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-
-	palmas: palmas@48 {
-		compatible = "ti,palmas";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
-		reg = <0x48>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ti,system-power-controller;
-
-		extcon_usb3: palmas_usb {
-			compatible = "ti,palmas-usb-vid";
-			ti,enable-vbus-detection;
-			ti,enable-id-detection;
-			ti,wakeup;
-		};
-
-		clk32kgaudio: palmas_clk32k@1 {
-			compatible = "ti,palmas-clk32kgaudio";
-			#clock-cells = <0>;
-		};
-
-		palmas_pmic {
-			compatible = "ti,palmas-pmic";
-			interrupt-parent = <&palmas>;
-			interrupts = <14 IRQ_TYPE_NONE>;
-			interrupt-name = "short-irq";
-
-			ti,ldo6-vibrator;
-
-			regulators {
-				smps123_reg: smps123 {
-					/* VDD_OPP_MPU */
-					regulator-name = "smps123";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_OPP_MM */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_DDR3 - over VDD_SMPS6 */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps7_reg: smps7 {
-					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
-					regulator-name = "smps7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps8_reg: smps8 {
-					/* VDD_OPP_CORE */
-					regulator-name = "smps8";
-					regulator-min-microvolt = < 600000>;
-					regulator-max-microvolt = <1310000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps9_reg: smps9 {
-					/* VDDA_2v1_AUD over VDD_2v1 */
-					regulator-name = "smps9";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2100000>;
-					ti,smps-range = <0x80>;
-				};
-
-				smps10_out2_reg: smps10_out2 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out2";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps10_out1_reg: smps10_out1 {
-					/* VBUS_5V_OTG */
-					regulator-name = "smps10_out1";
-					regulator-min-microvolt = <5000000>;
-					regulator-max-microvolt = <5000000>;
-				};
-
-				ldo1_reg: ldo1 {
-					/* VDDAPHY_CAM: vdda_csiport */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VCC_2V8_DISP: Does not go anywhere */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDAPHY_MDM: vdda_lli */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					/* Only if Modem is used */
-					status = "disabled";
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo6_reg: ldo6 {
-					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
-					regulator-name = "ldo6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo7_reg: ldo7 {
-					/* VDD_VPP: vpp1 */
-					regulator-name = "ldo7";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					/* Only for efuse reprograming! */
-					status = "disabled";
-				};
-
-				ldo8_reg: ldo8 {
-					/* VDD_3v0: Does not go anywhere */
-					regulator-name = "ldo8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-					/* Unused */
-					status = "disabled";
-				};
-
-				ldo9_reg: ldo9 {
-					/* VCC_DV_SDIO: vdds_sdcard */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3250000>;
-					regulator-max-microvolt = <3250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				regen3_reg: regen3 {
-					/* REGEN3 controls LDO9 supply to card */
-					regulator-name = "regen3";
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		palmas_power_button: palmas_power_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&palmas>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-	};
-
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&twl6040_pins>;
-
-		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
-		ti,audpwron-gpio = <&gpio5 13 0>;  /* gpio line 141 */
-
-		vio-supply = <&smps7_reg>;
-		v2v1-supply = <&smps9_reg>;
-		enable-active-high;
-
-		clocks = <&clk32kgaudio>;
-		clock-names = "clk32k";
-	};
+&hdmi {
+	vdda-supply = <&ldo4_reg>;
 };
 
 &i2c5 {
@@ -552,92 +37,17 @@
 	};
 };
 
-&mcpdm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcpdm_pins>;
-	status = "okay";
-};
-
-&mcbsp1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp1_pins>;
-	status = "okay";
-};
-
-&mcbsp2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp2_pins>;
-	status = "okay";
-};
-
-&usbhshost {
-	port2-mode = "ehci-hsic";
-	port3-mode = "ehci-hsic";
-};
-
-&usbhsehci {
-	phys = <0 &hsusb2_phy &hsusb3_phy>;
-};
-
-&usb3 {
-	extcon = <&extcon_usb3>;
-	vbus-supply = <&smps10_out1_reg>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			      <&omap5_pmx_core 0x19c>;
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&dss {
-	status = "ok";
+&omap5_pmx_core {
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
+			OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
+		>;
+	};
 };
 
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo4_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
+&tpd12s015 {
+	gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
+		<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
+		<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
 };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 4c04389dab32..38805ebbe2ba 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -391,6 +391,8 @@
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 4>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
@@ -850,18 +852,6 @@
 			hw-caps-temp-alert;
 		};
 
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
 		usb3: omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
@@ -883,7 +873,6 @@
 				phys = <&usb2_phy>, <&usb3_phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				dr_mode = "peripheral";
-				tx-fifo-resize;
 			};
 		};
 
@@ -897,7 +886,7 @@
 			usb2_phy: usb2phy@4a084000 {
 				compatible = "ti,omap-usb2";
 				reg = <0x4a084000 0x7c>;
-				ctrl-module = <&omap_control_usb2phy>;
+				syscon-phy-power = <&scm_conf 0x300>;
 				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
 				clock-names = "wkupclk", "refclk";
 				#phy-cells = <0>;
@@ -909,7 +898,7 @@
 				      <0x4a084800 0x64>,
 				      <0x4a084c00 0x40>;
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy>;
+				syscon-phy-power = <&scm_conf 0x370>;
 				clocks = <&usb_phy_cm_clk32k>,
 					 <&sys_clkin>,
 					 <&usb_otg_ss_refclk960m>;
@@ -965,14 +954,6 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin>;
-			clock-names = "sysclk";
-		};
-
 		/* OCP2SCP3 */
 		ocp2scp@4a090000 {
 			compatible = "ti,omap-ocp2scp";
@@ -987,7 +968,7 @@
 				      <0x4A096400 0x64>, /* phy_tx */
 				      <0x4A096800 0x40>; /* pll_ctrl */
 				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
+				syscon-phy-power = <&scm_conf 0x374>;
 				clocks = <&sys_clkin>, <&sata_ref_clk>;
 				clock-names = "sysclk", "refclk";
 				#phy-cells = <0>;
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
new file mode 100644
index 000000000000..1cf644bfd7ea
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
@@ -0,0 +1,87 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-GL
+ *       (also known as Buffalo Linkstation Pro/Live)
+ *
+ * Copyright (C) 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
+ * Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "orion5x-linkstation.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Buffalo Linkstation Pro/Live";
+	compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+};
+
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+};
+
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
index 3daec912b4bf..0eead400f427 100644
--- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Buffalo Linkstation LS-WTGL
  *
- * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -44,9 +45,10 @@
 
 /dts-v1/;
 
+#include "orion5x-linkstation.dtsi"
+#include "mvebu-linkstation-gpio-simple.dtsi"
+#include "mvebu-linkstation-fan.dtsi"
 #include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "orion5x-mv88f5182.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-WTGL";
@@ -57,217 +59,93 @@
 		reg = <0x00000000 0x4000000>;
 	};
 
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
-		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
-			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
-
-		internal-regs {
-			pinctrl: pinctrl@10000 {
-				pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
-					&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-				pinctrl-names = "default";
-
-				pmx_led_power: pmx-leds {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_led_alarm: pmx-leds {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_led_info: pmx-leds {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_power_hdd: pmx-power-hdd {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_usb_power: pmx-usb-power {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_sata0: pmx-sata0 {
-					marvell,pins = "mpp12";
-					marvell,function = "sata0";
-				};
-
-				pmx_sata1: pmx-sata1 {
-					marvell,pins = "mpp13";
-					marvell,function = "sata1";
-				};
-
-				pmx_fan_high: pmx-fan-high {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_fan_low: pmx-fan-low {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_fan_lock: pmx-fan-lock {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_power_switch: pmx-power-switch {
-					marvell,pins = "mpp8", "mpp10";
-					marvell,function = "gpio";
-				};
-			};
-		};
-	};
-
 	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_switch>;
-		pinctrl-names = "default";
-
-		button@1 {
-			label = "Power-on Switch";
-			linux,code = <KEY_RESERVED>;
-			linux,input-type = <5>;
+		power-on-switch {
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
-			label = "Power-auto Switch";
-			linux,code = <KEY_ESC>;
-			linux,input-type = <5>;
+		power-auto-switch {
 			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 		};
 	};
 
 	gpio_leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_led_power &pmx_led_alarm
-			     &pmx_led_info>;
-		pinctrl-names = "default";
-
-		led@1 {
-			label = "lswtgl:blue:power";
+		blue-power-led {
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 		};
 
-		led@2 {
-			label = "lswtgl:red:alarm";
+		red-alarm-led {
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		led@3 {
-			label = "lswtgl:amber:info";
+		amber-info-led {
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 		};
 	};
 
 	gpio_fan {
-		compatible = "gpio-fan";
-		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
-		pinctrl-names = "default";
-
 		gpios = <&gpio0 14 GPIO_ACTIVE_LOW
 			 &gpio0 17 GPIO_ACTIVE_LOW>;
 
-		gpio-fan,speed-map = <0 3
-				1500 2
-				3250 1
-				5000 0>;
-
-		alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	};
+};
 
-	restart_poweroff {
-		compatible = "restart-poweroff";
+&pinctrl {
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
-		pinctrl-names = "default";
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
 
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
 
-		hdd_power: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "HDD Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-		};
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
 	};
-};
 
-&mdio {
-	status = "okay";
+	pmx_fan_lock: pmx-fan-lock {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
 
-	ethphy: ethernet-phy {
-		reg = <8>;
+	pmx_power_switch: pmx-power-switch {
+		marvell,pins = "mpp8", "mpp10";
+		marvell,function = "gpio";
 	};
-};
 
-&eth {
-	status = "okay";
+	pmx_power_usb: pmx-power-usb {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
 
-	ethernet-port@0 {
-		phy-handle = <&ethphy>;
+	pmx_fan_high: pmx-fan-high {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
 	};
-};
 
-&ehci0 {
-	status = "okay";
+	pmx_fan_low: pmx-fan-low {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
 };
 
-&i2c {
-	status = "okay";
-
-	rtc {
-		compatible = "ricoh,rs5c372a";
-		reg = <0x32>;
-	};
+&hdd_power {
+	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
 };
 
-&wdt {
-	status = "disabled";
+&usb_power {
+	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 };
 
 &sata {
-	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
-	pinctrl-names = "default";
-	status = "okay";
 	nr-ports = <2>;
 };
-
-&uart0 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/orion5x-linkstation.dtsi b/arch/arm/boot/dts/orion5x-linkstation.dtsi
new file mode 100644
index 000000000000..ed456ab35fd8
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Device Tree common file for orion5x based Buffalo Linkstation
+ *
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+				 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+				 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&pinctrl {
+	pmx_power_hdd: pmx-power-hdd {
+		marvell,function = "gpio";
+	};
+
+	pmx_power_usb: pmx-power-usb {
+		marvell,function = "gpio";
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c {
+	status = "okay";
+
+	rtc {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&wdt {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <1>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 75cd01bd6024..e1b6d2a2ac49 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -212,6 +212,16 @@
 				status = "disabled";
 			};
 
+			cesa: crypto@90000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <28>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
+				status = "okay";
+			};
+
 			ehci1: ehci@a0000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0xa0000 0x1000>;
@@ -220,13 +230,11 @@
 			};
 		};
 
-		cesa: crypto@90000 {
-			compatible = "marvell,orion-crypto";
-			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
-			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
-			reg-names = "regs", "sram";
-			interrupts = <28>;
-			status = "okay";
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
index 90fdbd77f274..a00d7ce7802b 100644
--- a/arch/arm/boot/dts/phy3250.dts
+++ b/arch/arm/boot/dts/phy3250.dts
@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "lpc32xx.dtsi"
+#include "lpc32xx.dtsi"
 
 / {
 	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
@@ -22,27 +22,45 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0x4000000>;
+		reg = <0x80000000 0x4000000>;
 	};
 
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
+	regulators {
+		backlight_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "backlight_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 4 0>;
+			enable-active-high;
+			regulator-boot-on;
 		};
 
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
+		lcd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 0 0>;
+			enable-active-high;
+			regulator-boot-on;
 		};
 
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
+		sd_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "sd_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio 5 5 0>;
+			enable-active-high;
+		};
+	};
+
+	ahb {
+		mac: ethernet@31060000 {
+			phy-mode = "rmii";
+			use-iram;
 		};
-*/
 
 		clcd@31040000 {
 			status = "okay";
@@ -123,15 +141,6 @@
 				clock-frequency = <100000>;
 			};
 
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2c {
-					compatible = "nxp,isp1301";
-					reg = <0x2c>;
-				};
-			};
-
 			ssp0: ssp@20084000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -162,6 +171,7 @@
 				cd-gpios = <&gpio 3 1 0>;
 				cd-inverted;
 				bus-width = <4>;
+				vmmc-supply = <&sd_reg>;
 				status = "okay";
 			};
 		};
@@ -200,3 +210,18 @@
 		};
 	};
 };
+
+/* Here, choose exactly one from: ohci, usbd */
+&ohci /* &usbd */ {
+	transceiver = <&isp1301>;
+	status = "okay";
+};
+
+&i2cusb {
+	clock-frequency = <100000>;
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 7f68a1ee7073..210192c38df3 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -13,6 +13,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <75>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index cf6998a0804d..fec47bcd8292 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -12,6 +12,7 @@
 			interrupts = <25>;
 			#dma-channels = <32>;
 			#dma-cells = <2>;
+			#dma-requests = <100>;
 			status = "okay";
 		};
 
@@ -30,7 +31,7 @@
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
-			dmas = <&pdma 97>;
+			dmas = <&pdma 97 3>;
 			dma-names = "data";
 			#address-cells = <1>;
 			#size-cells = <1>;	
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
new file mode 100644
index 000000000000..c535b3f0e5cf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -0,0 +1,276 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+/ {
+	model = "Asus Nexus7(flo)";
+	compatible = "asus,nexus7-flo", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		serial1 = &gsbi6_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ext_3p3v: regulator-fixed@1 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "ext_3p3v";
+		regulator-type = "voltage";
+		startup-delay-us = <0>;
+		gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		power {
+			label = "Power";
+			gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+		volume_up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+		volume_down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	soc {
+		rpm@108000 {
+			regulators {
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vin_lvs2-supply = <&pm8921_s1>;
+
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+				vdd_ncp-supply = <&pm8921_l6>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				/* msm otg HSUSB_VDDCX */
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				/*
+				 * msm_sdcc.1-sdc-vdd_io
+				 * tabla2x-slim-CDC_VDDA_RX
+				 * tabla2x-slim-CDC_VDDA_TX
+				 * tabla2x-slim-CDC_VDD_CP
+				 * tabla2x-slim-VDDIO_CDC
+				 */
+				s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+					regulator-always-on;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				/* mipi_dsi.1-dsi1_pll_vdda */
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* msm_otg-HSUSB_3p3 */
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				/* msm_otg-HSUSB_1p8 */
+				l4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/* msm_sdcc.1-sdc_vdd */
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					regulator-always-on;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				/* mipi_dsi.1-dsi1_avdd */
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				/* pwm_power for backlight */
+				l17 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3600000>;
+					bias-pull-down;
+				};
+
+				/* camera, qdsp6 */
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				/*
+				 * tabla2x-slim-CDC_VDDA_A_1P2V
+				 * tabla2x-slim-VDDD_CDC_D
+				 */
+				l25 {
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+				/*
+				 * mipi_dsi.1-dsi1_vddio
+				 * pil_riva-pll_vdd
+				 */
+				lvs7 {
+					bias-pull-down;
+				};
+			};
+		};
+
+		gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c@16280000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-names = "default";
+
+				trackpad@10 {
+					compatible = "elan,ekth3500";
+					reg = <0x10>;
+					interrupt-parent = <&tlmm_pinmux>;
+					interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+				};
+			};
+		};
+
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+		};
+
+		gsbi@16500000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@16540000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi6_uart_4pins>;
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+
+		/* OTG */
+		phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		/* OTG */
+		usb@12500000 {
+			status = "okay";
+		};
+
+		amba {
+			/* eMMC */
+			sdcc@12400000 {
+				status = "okay";
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 47c0282bdfca..35f1d46edded 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -1,4 +1,6 @@
 #include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "CompuLab CM-QS600";
@@ -12,12 +14,39 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pwrseq {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		sdcc4_pwrseq: sdcc4_pwrseq {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_default_gpios>;
+			compatible = "mmc-pwrseq-simple";
+			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	soc {
 		pinctrl@800000 {
-			i2c1_pins: i2c1 {
+			card_detect: card_detect {
 				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
+					pins = "gpio26";
+					function = "gpio";
+					bias-disable;
+				};
+			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
 				};
 			};
 		};
@@ -37,7 +66,7 @@
 
 
 				/* Buck SMPS */
-				pm8921_s1: s1 {
+				s1 {
 					regulator-always-on;
 					regulator-min-microvolt = <1225000>;
 					regulator-max-microvolt = <1225000>;
@@ -45,47 +74,52 @@
 					bias-pull-down;
 				};
 
-				pm8921_s3: s3 {
+				s3 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1400000>;
 					qcom,switch-mode-frequency = <4800000>;
 				};
 
-				pm8921_s4: s4 {
+				s4 {
 					regulator-min-microvolt	= <1800000>;
 					regulator-max-microvolt	= <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_s7: s7 {
+				s7 {
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_l3: l3 {
+				l3 {
 					regulator-min-microvolt = <3050000>;
 					regulator-max-microvolt = <3300000>;
 					bias-pull-down;
 				};
 
-				pm8921_l4: l4 {
+				l4 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1800000>;
 					bias-pull-down;
 				};
 
-				pm8921_l5: l5 {
+				l5 {
 					regulator-min-microvolt = <2750000>;
 					regulator-max-microvolt = <3000000>;
 					bias-pull-down;
 				};
 
-				pm8921_l23: l23 {
+				l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
+
+				pm8921_lvs6: lvs6 {
+					bias-pull-down;
+				};
+
 			};
 		};
 
@@ -96,10 +130,8 @@
 			i2c@12460000 {
 				status = "okay";
 				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
 
-				eeprom: eeprom@50 {
+				eeprom@50 {
 					compatible = "24c02";
 					reg = <0x50>;
 					pagesize = <32>;
@@ -112,6 +144,8 @@
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16640000 {
 				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
 			};
 		};
 
@@ -163,6 +197,31 @@
 			regulator-always-on;
 		};
 
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					wlan_default_gpios: wlan-gpios {
+						pios {
+							pins = "gpio43";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+				};
+			};
+		};
+
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&v3p3_fixed>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
@@ -175,12 +234,16 @@
 			sdcc3: sdcc@12180000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
 			sdcc4: sdcc@121c0000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
 				vqmmc-supply = <&v3p3_fixed>;
+				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index f3100da082b2..2eeb0904eaa7 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -1,5 +1,6 @@
 #include "qcom-apq8064-v2.0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Qualcomm APQ8064/IFC6410";
@@ -8,12 +9,40 @@
 	aliases {
 		serial0 = &gsbi7_serial;
 		serial1 = &gsbi6_serial;
+		i2c0 = &gsbi1_i2c;
+		i2c1 = &gsbi2_i2c;
+		i2c2 = &gsbi3_i2c;
+		i2c3 = &gsbi4_i2c;
+		spi0 = &gsbi5_spi;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	pwrseq {
+		compatible = "simple-bus";
+
+		sdcc4_pwrseq: sdcc4_pwrseq {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wlan_default_gpios>;
+			compatible = "mmc-pwrseq-simple";
+			reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&notify_led>;
+
+		led@1 {
+			label = "apq8064:green:user1";
+			gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
 	soc {
 		pinctrl@800000 {
 			card_detect: card_detect {
@@ -23,6 +52,18 @@
 					bias-disable;
 				};
 			};
+
+			pcie_pins: pcie_pinmux {
+				mux {
+					pins = "gpio27";
+					function = "gpio";
+				};
+				conf {
+					pins = "gpio27";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
 		};
 
 		rpm@108000 {
@@ -40,7 +81,7 @@
 
 
 				/* Buck SMPS */
-				pm8921_s1: s1 {
+				s1 {
 					regulator-always-on;
 					regulator-min-microvolt = <1225000>;
 					regulator-max-microvolt = <1225000>;
@@ -48,55 +89,59 @@
 					bias-pull-down;
 				};
 
-				pm8921_s3: s3 {
+				s3 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1400000>;
 					qcom,switch-mode-frequency = <4800000>;
 				};
 
-				pm8921_s4: s4 {
+				s4 {
 					regulator-min-microvolt	= <1800000>;
 					regulator-max-microvolt	= <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_s7: s7 {
+				s7 {
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_l3: l3 {
+				l3 {
 					regulator-min-microvolt = <3050000>;
 					regulator-max-microvolt = <3300000>;
 					bias-pull-down;
 				};
 
-				pm8921_l4: l4 {
+				l4 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1800000>;
 					bias-pull-down;
 				};
 
-				pm8921_l5: l5 {
+				l5 {
 					regulator-min-microvolt = <2750000>;
 					regulator-max-microvolt = <3000000>;
 					bias-pull-down;
 				};
 
-				pm8921_l6: l6 {
+				l6 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
 					bias-pull-down;
 				};
 
-				pm8921_l23: l23 {
+				l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
 
-				pm8921_lvs1: lvs1 {
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs6 {
 					bias-pull-down;
 				};
 			};
@@ -117,10 +162,17 @@
 		gsbi3: gsbi@16200000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
-			i2c3: i2c@16280000 {
+			i2c@16280000 {
+				status = "okay";
+			};
+		};
+
+		gsbi@16300000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			/* CAM I2C MIPI-CSI connector */
+			i2c@16380000 {
 				status = "okay";
-				pinctrl-0 = <&i2c3_pins>;
-				pinctrl-names = "default";
 			};
 		};
 
@@ -131,10 +183,8 @@
 			i2c@12460000 {
 				status = "okay";
 				clock-frequency = <200000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
 
-				eeprom: eeprom@52 {
+				eeprom@52 {
 					compatible = "atmel,24c128";
 					reg = <0x52>;
 					pagesize = <32>;
@@ -142,15 +192,24 @@
 			};
 		};
 
+		gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+			spi4: spi@1a280000 {
+				status = "okay";
+				num-cs = <1>;
+				cs-gpios = <&tlmm_pinmux 53 0>;
+			};
+		};
+
 		gsbi@16500000 {
 			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+			qcom,mode = <GSBI_PROT_UART_W_FC>;
 
 			serial@16540000 {
 				status = "ok";
-
 				pinctrl-names = "default";
-				pinctrl-0 = <&uart_pins>;
+				pinctrl-0 = <&gsbi6_uart_4pins>;
 			};
 		};
 
@@ -159,6 +218,8 @@
 			qcom,mode = <GSBI_PROT_I2C_UART>;
 			serial@16640000 {
 				status = "ok";
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi7_uart_2pins>;
 			};
 		};
 
@@ -210,6 +271,40 @@
 			status = "okay";
 		};
 
+		pci@1b500000 {
+			status = "ok";
+			vdda-supply = <&pm8921_s3>;
+			vdda_phy-supply = <&pm8921_lvs6>;
+			vdda_refclk-supply = <&ext_3p3v>;
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					wlan_default_gpios: wlan-gpios {
+						pios {
+							pins = "gpio43";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+
+					notify_led: nled {
+						pios {
+							pins = "gpio18";
+							function = "normal";
+							bias-disable;
+							power-source = <PM8921_GPIO_S4>;
+						};
+					};
+				};
+			};
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
@@ -231,6 +326,7 @@
 				status = "okay";
 				vmmc-supply = <&ext_3p3v>;
 				vqmmc-supply = <&pm8921_lvs1>;
+				mmc-pwrseq = <&sdcc4_pwrseq>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
new file mode 100644
index 000000000000..b57c59d5bc00
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -0,0 +1,208 @@
+
+&tlmm_pinmux {
+	sdc4_gpios: sdc4-gpios {
+		pios {
+			pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+			function = "sdc4";
+		};
+	};
+
+	ps_hold: ps_hold {
+		mux {
+			pins = "gpio78";
+			function = "ps_hold";
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gsbi1";
+		};
+
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_sleep: i2c1_pins_sleep {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio20", "gpio21";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gsbi2";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_sleep: i2c2_pins_sleep {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio24", "gpio25";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gsbi3";
+		};
+
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c3_pins_sleep: i2c3_pins_sleep {
+		mux {
+			pins = "gpio8", "gpio9";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio8", "gpio9";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+		};
+
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c4_pins_sleep: i2c4_pins_sleep {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio12", "gpio13";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	spi5_default: spi5_default {
+		pinmux {
+			pins = "gpio51", "gpio52", "gpio54";
+			function = "gsbi5";
+		};
+
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio53";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio54";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		pinconf_cs {
+			pins = "gpio53";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spi5_sleep: spi5_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+		};
+
+		pinconf {
+			pins = "gpio51", "gpio52", "gpio53", "gpio54";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	i2c6_pins_sleep: i2c6_pins_sleep {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "gpio";
+		};
+		pinconf {
+			pins = "gpio16", "gpio17";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
+	gsbi6_uart_2pins: gsbi6_uart_2pins {
+		mux {
+			pins = "gpio14", "gpio15";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi6_uart_4pins: gsbi6_uart_4pins {
+		mux {
+			pins = "gpio14", "gpio15", "gpio16", "gpio17";
+			function = "gsbi6";
+		};
+	};
+
+	gsbi7_uart_2pins: gsbi7_uart_2pins {
+		mux {
+			pins = "gpio82", "gpio83";
+			function = "gsbi7";
+		};
+	};
+
+	gsbi7_uart_4pins: gsbi7_uart_4pins {
+		mux {
+			pins = "gpio82", "gpio83", "gpio84", "gpio85";
+			function = "gsbi7";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 000000000000..06b3c76c3e41
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,436 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z";
+	compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+				rx {
+					pins = "gpio52";
+					function = "gsbi5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx {
+					pins = "gpio51";
+					function = "gsbi5";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+			sdcc1_pin_a: sdcc1-pin-active {
+				clk {
+					pins = "sdc1_clk";
+					drive-strengh = <16>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					drive-strengh = <10>;
+					bias-pull-up;
+				};
+
+				data {
+					pins = "sdc1_data";
+					drive-strengh = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdcc3_pin_a: sdcc3-pin-active {
+				clk {
+					pins = "sdc3_clk";
+					drive-strengh = <8>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "sdc3_cmd";
+					drive-strengh = <8>;
+					bias-pull-up;
+				};
+
+				data {
+					pins = "sdc3_data";
+					drive-strengh = <8>;
+					bias-pull-up;
+				};
+			};
+
+			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+				pins = "gpio26";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+
+		rpm@108000 {
+			regulators {
+				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs_1_3_6-supply = <&pm8921_s4>;
+				vin_lvs_4_5_7-supply = <&pm8921_s4>;
+				vin_ncp-supply = <&pm8921_l6>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_l24-supply = <&pm8921_s1>;
+				vin_l25-supply = <&pm8921_s1>;
+				vin_l27-supply = <&pm8921_s7>;
+				vin_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				s8 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				/* PMOS LDO */
+				l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					bias-pull-down;
+				};
+
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l10 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l17 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				l18 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l21 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l22 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				l27 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				l28 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l29 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs2 {
+					bias-pull-down;
+				};
+
+				lvs3 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+
+				lvs7 {
+					bias-pull-down;
+				};
+
+				usb-switch {};
+
+				hdmi-switch {};
+
+				ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					gpio_keys_pin_a: gpio-keys-pin-active {
+						pins = "gpio3", "gpio4", "gpio29", "gpio35";
+						function = "normal";
+
+						bias-pull-up;
+						drive-push-pull;
+						input-enable;
+						power-source = <2>;
+						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+						qcom,pull-up-strength = <0>;
+					};
+				};
+			};
+		};
+
+		phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		gsbi@1a200000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@1a240000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi5_uart_pin_a>;
+			};
+		};
+
+		amba {
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdcc1_pin_a>;
+			};
+
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l6>;
+				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index d2e94d647c27..65d0e8d98259 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -11,6 +11,17 @@
 	compatible = "qcom,apq8064";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@80000000 {
+			reg = <0x80000000 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -80,6 +91,39 @@
 		interrupts = <1 10 0x304>;
 	};
 
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	sfpb_mutex: hwmutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+
+		hwlocks = <&sfpb_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -98,41 +142,11 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&ps_hold>;
+		};
 
-			sdc4_gpios: sdc4-gpios {
-				pios {
-					pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
-					function = "sdc4";
-				};
-			};
-
-			ps_hold: ps_hold {
-				mux {
-					pins = "gpio78";
-					function = "ps_hold";
-				};
-			};
-
-			i2c1_pins: i2c1 {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
-				};
-			};
-
-			i2c3_pins: i2c3 {
-				mux {
-					pins = "gpio8", "gpio9";
-					function = "gsbi3";
-				};
-			};
-
-			uart_pins: uart_pins {
-				mux {
-					pins = "gpio14", "gpio15", "gpio16", "gpio17";
-					function = "gsbi6";
-				};
-			};
+		sfpb_wrapper_mutex: syscon@1200000 {
+			compatible = "syscon";
+			reg = <0x01200000 0x8000>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -211,8 +225,10 @@
 
 			syscon-tcsr = <&tcsr>;
 
-			i2c1: i2c@12460000 {
+			gsbi1_i2c: i2c@12460000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				reg = <0x12460000 0x1000>;
 				interrupts = <0 194 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
@@ -220,6 +236,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
+
 		};
 
 		gsbi2: gsbi@12480000 {
@@ -235,9 +252,11 @@
 
 			syscon-tcsr = <&tcsr>;
 
-			i2c2: i2c@124a0000 {
+			gsbi2_i2c: i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
+				pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				interrupts = <0 196 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
@@ -256,13 +275,75 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			i2c3: i2c@16280000 {
+			gsbi3_i2c: i2c@16280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>;
+				pinctrl-names = "default", "sleep";
 				reg = <0x16280000 0x1000>;
 				interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
 				clocks = <&gcc GSBI3_QUP_CLK>,
 					 <&gcc GSBI3_H_CLK>;
 				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi4: gsbi@16300000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <4>;
+			reg = <0x16300000 0x03>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi4_i2c: i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16380000 0x1000>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI4_QUP_CLK>,
+					 <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x03>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x100>,
+				      <0x1a200000 0x03>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			gsbi5_spi: spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+				pinctrl-0 = <&spi5_default &spi5_sleep>;
+				pinctrl-names = "default", "sleep";
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
 			};
 		};
 
@@ -286,6 +367,17 @@
 				clock-names = "core", "iface";
 				status = "disabled";
 			};
+
+			gsbi6_i2c: i2c@16580000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>;
+				pinctrl-names = "default", "sleep";
+				reg = <0x16580000 0x1000>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI6_QUP_CLK>,
+					 <&gcc GSBI6_H_CLK>;
+				clock-names = "core", "iface";
+			};
 		};
 
 		gsbi7: gsbi@16600000 {
@@ -311,6 +403,13 @@
 			};
 		};
 
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
 		qcom,ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x00500000 0x1000>;
@@ -327,7 +426,8 @@
 
 				pm8921_gpio: gpio@150 {
 
-					compatible = "qcom,pm8921-gpio";
+					compatible = "qcom,pm8921-gpio",
+						     "qcom,ssbi-gpio";
 					reg = <0x150>;
 					interrupts = <192 1>, <193 1>, <194 1>,
 						     <195 1>, <196 1>, <197 1>,
@@ -351,7 +451,8 @@
 				};
 
 				pm8921_mpps: mpps@50 {
-					compatible = "qcom,pm8921-mpp";
+					compatible = "qcom,pm8921-mpp",
+						     "qcom,ssbi-mpp";
 					reg = <0x50>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -361,6 +462,22 @@
 					<136 1>, <137 1>, <138 1>, <139 1>;
 				};
 
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
 			};
 		};
 
@@ -400,12 +517,63 @@
 					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
+			rpmcc: clock-controller {
+				compatible	= "qcom,rpmcc-apq8064", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+
 			regulators {
 				compatible = "qcom,rpm-pm8921-regulators";
 
+				pm8921_s1: s1 {};
+				pm8921_s2: s2 {};
+				pm8921_s3: s3 {};
+				pm8921_s4: s4 {};
+				pm8921_s7: s7 {};
+				pm8921_s8: s8 {};
+
+				pm8921_l1: l1 {};
+				pm8921_l2: l2 {};
+				pm8921_l3: l3 {};
+				pm8921_l4: l4 {};
+				pm8921_l5: l5 {};
+				pm8921_l6: l6 {};
+				pm8921_l7: l7 {};
+				pm8921_l8: l8 {};
+				pm8921_l9: l9 {};
+				pm8921_l10: l10 {};
+				pm8921_l11: l11 {};
+				pm8921_l12: l12 {};
+				pm8921_l14: l14 {};
+				pm8921_l15: l15 {};
+				pm8921_l16: l16 {};
+				pm8921_l17: l17 {};
+				pm8921_l18: l18 {};
+				pm8921_l21: l21 {};
+				pm8921_l22: l22 {};
+				pm8921_l23: l23 {};
+				pm8921_l24: l24 {};
+				pm8921_l25: l25 {};
+				pm8921_l26: l26 {};
+				pm8921_l27: l27 {};
+				pm8921_l28: l28 {};
+				pm8921_l29: l29 {};
+
+				pm8921_lvs1: lvs1 {};
+				pm8921_lvs2: lvs2 {};
+				pm8921_lvs3: lvs3 {};
+				pm8921_lvs4: lvs4 {};
+				pm8921_lvs5: lvs5 {};
+				pm8921_lvs6: lvs6 {};
+				pm8921_lvs7: lvs7 {};
+
+				pm8921_usb_switch: usb-switch {};
+
 				pm8921_hdmi_switch: hdmi-switch {
 					bias-pull-down;
 				};
+
+				pm8921_ncp: ncp {};
 			};
 		};
 
@@ -554,7 +722,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -618,5 +786,42 @@
 			compatible = "qcom,tcsr-apq8064", "syscon";
 			reg = <0x1a400000 0x100>;
 		};
+
+		pcie: pci@1b500000 {
+			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
+			reg = <0x1b500000 0x1000
+			       0x1b502000 0x80
+			       0x1b600000 0x100
+			       0x0ff00000 0x100000>;
+			reg-names = "dbi", "elbi", "parf", "config";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
+				  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
+			interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			clocks = <&gcc PCIE_A_CLK>,
+				 <&gcc PCIE_H_CLK>,
+				 <&gcc PCIE_PHY_REF_CLK>;
+			clock-names = "core", "iface", "phy";
+			resets = <&gcc PCIE_ACLK_RESET>,
+				 <&gcc PCIE_HCLK_RESET>,
+				 <&gcc PCIE_POR_RESET>,
+				 <&gcc PCIE_PCI_RESET>,
+				 <&gcc PCIE_PHY_RESET>;
+			reset-names = "axi", "ahb", "por", "pci", "phy";
+			status = "disabled";
+		};
 	};
 };
+#include "qcom-apq8064-pins.dtsi"
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 835bdc71c5ba..c0e205315042 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -8,6 +8,8 @@
 
 	aliases {
 		serial0 = &blsp1_uart2;
+		usid0 = &pm8941_0;
+		usid4 = &pm8841_0;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
index c9c2b769554f..2052b84a77c6 100644
--- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -3,10 +3,11 @@
 
 / {
 	model = "Qualcomm APQ8084/IFC6540";
-	compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
+	compatible = "qcom,apq8084-sbc", "qcom,apq8084";
 
 	aliases {
 		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
index 3016c7048d44..d174d15bcf70 100644
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -7,6 +7,7 @@
 
 	aliases {
 		serial0 = &blsp2_uart2;
+		usid0 = &pma8084_0;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 0554fbd72c40..a33a09f6821e 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -10,6 +10,17 @@
 	compatible = "qcom,apq8084";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_mem: smem_region@fa00000 {
+			reg = <0xfa00000 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -80,6 +91,20 @@
 		interrupts = <1 7 0xf04>;
 	};
 
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 2 0xf08>,
@@ -89,6 +114,15 @@
 		clock-frequency = <19200000>;
 	};
 
+	smem {
+		compatible = "qcom,smem";
+
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		memory-region = <&smem_mem>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -103,6 +137,11 @@
 			      <0xf9002000 0x1000>;
 		};
 
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -221,9 +260,26 @@
 			compatible = "qcom,gcc-apq8084";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x4000>;
 		};
 
+		tcsr_mutex_regs: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
+
+		tcsr_mutex: hwlock {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_regs 0 0x80>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
+
 		tlmm: pinctrl@fd510000 {
 			compatible = "qcom,apq8084-pinctrl";
 			reg = <0xfd510000 0x4000>;
@@ -281,4 +337,71 @@
 			#interrupt-cells = <4>;
 		};
 	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <0 168 1>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-apq8084";
+				qcom,smd-channels = "rpm_requests";
+
+				pma8084-regulators {
+					compatible = "qcom,rpm-pma8084-regulators";
+
+					pma8084_s1: s1 {};
+					pma8084_s2: s2 {};
+					pma8084_s3: s3 {};
+					pma8084_s4: s4 {};
+					pma8084_s5: s5 {};
+					pma8084_s6: s6 {};
+					pma8084_s7: s7 {};
+					pma8084_s8: s8 {};
+					pma8084_s9: s9 {};
+					pma8084_s10: s10 {};
+					pma8084_s11: s11 {};
+					pma8084_s12: s12 {};
+
+					pma8084_l1: l1 {};
+					pma8084_l2: l2 {};
+					pma8084_l3: l3 {};
+					pma8084_l4: l4 {};
+					pma8084_l5: l5 {};
+					pma8084_l6: l6 {};
+					pma8084_l7: l7 {};
+					pma8084_l8: l8 {};
+					pma8084_l9: l9 {};
+					pma8084_l10: l10 {};
+					pma8084_l11: l11 {};
+					pma8084_l12: l12 {};
+					pma8084_l13: l13 {};
+					pma8084_l14: l14 {};
+					pma8084_l15: l15 {};
+					pma8084_l16: l16 {};
+					pma8084_l17: l17 {};
+					pma8084_l18: l18 {};
+					pma8084_l19: l19 {};
+					pma8084_l20: l20 {};
+					pma8084_l21: l21 {};
+					pma8084_l22: l22 {};
+					pma8084_l23: l23 {};
+					pma8084_l24: l24 {};
+					pma8084_l25: l25 {};
+					pma8084_l26: l26 {};
+					pma8084_l27: l27 {};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index fa698635eea0..2601a907947b 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -62,6 +62,18 @@
 	};
 
 	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index e5f7f33aa467..cd214030b84a 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -42,6 +42,26 @@
 		interrupts = <1 9 0x304>;
 	};
 
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -167,7 +187,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 134cd91d68ec..da05e28a81a7 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -49,6 +49,29 @@
 		qcom,no-pc-write;
 	};
 
+	clocks {
+		cxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "cxo_board";
+		};
+
+		pxo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "pxo_board";
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -228,7 +251,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 016f9ad9392a..a0398b69f4f2 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -1,6 +1,9 @@
 #include "qcom-msm8974.dtsi"
 #include "qcom-pm8841.dtsi"
 #include "qcom-pm8941.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Sony Xperia Z1";
@@ -14,24 +17,403 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
 	memory@0 {
 		reg = <0 0x40000000>, <0x40000000 0x40000000>;
 		device_type = "memory";
 	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pm8841-regulators {
+					s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s3 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					s4 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+				};
+
+				pm8941-regulators {
+					vdd_l1_l3-supply = <&pm8941_s1>;
+					vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+					vdd_l4_l11-supply = <&pm8941_s1>;
+					vdd_l5_l7-supply = <&pm8941_s2>;
+					vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+					vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+					vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+					vdd_l21-supply = <&vreg_boost>;
+					vin_5vs-supply = <&pm8941_5v>;
+
+					s1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s2 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+						regulator-boot-on;
+					};
+
+					s3 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					s4 {
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+					};
+
+					l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l3 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					l4 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-boot-on;
+					};
+
+					l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1350000>;
+					};
+
+					l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l17 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					l19 {
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-boot-on;
+						regulator-system-load = <200000>;
+					};
+
+					l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-boot-on;
+					};
+
+					l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					l23 {
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+
+						regulator-boot-on;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_boost: vreg-boost {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg-boost";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&boost_bypass_n_pin>;
+     };
 };
 
 &soc {
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pm8941_l20>;
+		vqmmc-supply = <&pm8941_s3>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	sdhci@f98a4900 {
+		status = "ok";
+
+		bus-width = <4>;
+
+		vmmc-supply = <&pm8941_l21>;
+		vqmmc-supply = <&pm8941_l13>;
+
+		cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
+	};
+
 	serial@f991e000 {
 		status = "ok";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp1_uart2_pin_a>;
+	};
+
+	pinctrl@fd510000 {
+		blsp1_uart2_pin_a: blsp1-uart2-pin-active {
+			rx {
+				pins = "gpio5";
+				function = "blsp_uart2";
+
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			tx {
+				pins = "gpio4";
+				function = "blsp_uart2";
+
+				drive-strength = <4>;
+				bias-disable;
+			};
+		};
+
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <10>;
+				bias-pull-up;
+			};
+		};
+
+		sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+			pins = "gpio62";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
+		 };
+
+		sdhc2_pin_a: sdhc2-pin-active {
+			clk {
+				pins = "sdc2_clk";
+				drive-strength = <10>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc2_cmd", "sdc2_data";
+				drive-strength = <6>;
+				bias-pull-up;
+			};
+		};
+
 	};
 };
 
 &spmi_bus {
 	pm8941@0 {
+		charger@1000 {
+			qcom,fast-charge-safe-current = <1500000>;
+			qcom,fast-charge-current-limit = <1500000>;
+			qcom,dc-current-limit = <1800000>;
+			qcom,fast-charge-safe-voltage = <4400000>;
+			qcom,fast-charge-high-threshold-voltage = <4350000>;
+			qcom,fast-charge-low-threshold-voltage = <3400000>;
+			qcom,auto-recharge-threshold-voltage = <4200000>;
+			qcom,minimum-input-voltage = <4300000>;
+		};
+
+		gpios@c000 {
+			boost_bypass_n_pin: boost-bypass {
+				pins = "gpio21";
+				function = "normal";
+			};
+
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3", "gpio4", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PM8941_GPIO_S3>;
+			};
+		};
+
 		coincell@2800 {
 			status = "ok";
 			qcom,rset-ohms = <2100>;
 			qcom,vset-millivolts = <3000>;
 		};
 	};
+
+	pm8941@1 {
+		wled@d800 {
+			status = "ok";
+
+			qcom,cs-out;
+			qcom,current-limit = <20>;
+			qcom,current-boost-limit = <805>;
+			qcom,switching-freq = <1600>;
+			qcom,ovp = <29>;
+			qcom,num-strings = <2>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index ab8e57250468..ef5330578431 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include "skeleton.dtsi"
 
@@ -14,10 +14,50 @@
 		#size-cells = <1>;
 		ranges;
 
+		mpss@08000000 {
+			reg = <0x08000000 0x5100000>;
+			no-map;
+		};
+
+		mba@00d100000 {
+			reg = <0x0d100000 0x100000>;
+			no-map;
+		};
+
+		reserved@0d200000 {
+			reg = <0x0d200000 0xa00000>;
+			no-map;
+		};
+
+		adsp@0dc00000 {
+			reg = <0x0dc00000 0x1900000>;
+			no-map;
+		};
+
+		venus@0f500000 {
+			reg = <0x0f500000 0x500000>;
+			no-map;
+		};
+
 		smem_region: smem@fa00000 {
 			reg = <0xfa00000 0x200000>;
 			no-map;
 		};
+
+		tz@0fc00000 {
+			reg = <0x0fc00000 0x160000>;
+			no-map;
+		};
+
+		efs@0fd600000 {
+			reg = <0x0fd60000 0x1a0000>;
+			no-map;
+		};
+
+		unused@0ff00000 {
+			reg = <0x0ff00000 0x10100000>;
+			no-map;
+		};
 	};
 
 	cpus {
@@ -91,6 +131,20 @@
 		interrupts = <1 7 0xf04>;
 	};
 
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <1 2 0xf08>,
@@ -100,6 +154,82 @@
 		clock-frequency = <19200000>;
 	};
 
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_region>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	smp2p-wcnss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <451>, <431>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,ipc = <&apcs 8 18>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <4>;
+
+		wcnss_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+
+			#qcom,state-cells = <1>;
+		};
+
+		wcnss_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-2 = <&apcs 8 9>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,state-cells = <1>;
+		};
+
+		modem_smsm: modem@1 {
+			reg = <1>;
+			interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		adsp_smsm: adsp@2 {
+			reg = <2>;
+			interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		wcnss_smsm: wcnss@7 {
+			reg = <7>;
+			interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -114,6 +244,11 @@
 			      <0xf9002000 0x1000>;
 		};
 
+		apcs: syscon@f9011000 {
+			compatible = "syscon";
+			reg = <0xf9011000 0x1000>;
+		};
+
 		timer@f9020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -228,6 +363,7 @@
 			compatible = "qcom,gcc-msm8974";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x4000>;
 		};
 
@@ -240,6 +376,7 @@
 			compatible = "qcom,mmcc-msm8974";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 			reg = <0xfd8c0000 0x6000>;
 		};
 
@@ -250,13 +387,9 @@
 			#hwlock-cells = <1>;
 		};
 
-		smem@fa00000 {
-			compatible = "qcom,smem";
-
-			memory-region = <&smem_region>;
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
 			reg = <0xfc428000 0x4000>;
-
-			hwlocks = <&tcsr_mutex 3>;
 		};
 
 		blsp1_uart2: serial@f991e000 {
@@ -307,8 +440,19 @@
 			interrupts = <0 208 0>;
 		};
 
+		blsp_i2c8: i2c@f9964000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9964000 0x1000>;
+			interrupts = <0 102 IRQ_TYPE_NONE>;
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		blsp_i2c11: i2c@f9967000 {
-			status = "disable";
+			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
 			reg = <0xf9967000 0x1000>;
 			interrupts = <0 105 IRQ_TYPE_NONE>;
@@ -316,6 +460,8 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -333,5 +479,84 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
+
+		blsp2_dma: dma-controller@f9944000 {
+			compatible = "qcom,bam-v1.4.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <0 168 1>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8974";
+				qcom,smd-channels = "rpm_requests";
+
+				pm8841-regulators {
+					compatible = "qcom,rpm-pm8841-regulators";
+
+					pm8841_s1: s1 {};
+					pm8841_s2: s2 {};
+					pm8841_s3: s3 {};
+					pm8841_s4: s4 {};
+					pm8841_s5: s5 {};
+					pm8841_s6: s6 {};
+					pm8841_s7: s7 {};
+					pm8841_s8: s8 {};
+				};
+
+				pm8941-regulators {
+					compatible = "qcom,rpm-pm8941-regulators";
+
+					pm8941_s1: s1 {};
+					pm8941_s2: s2 {};
+					pm8941_s3: s3 {};
+					pm8941_5v: s4 {};
+
+					pm8941_l1: l1 {};
+					pm8941_l2: l2 {};
+					pm8941_l3: l3 {};
+					pm8941_l4: l4 {};
+					pm8941_l5: l5 {};
+					pm8941_l6: l6 {};
+					pm8941_l7: l7 {};
+					pm8941_l8: l8 {};
+					pm8941_l9: l9 {};
+					pm8941_l10: l10 {};
+					pm8941_l11: l11 {};
+					pm8941_l12: l12 {};
+					pm8941_l13: l13 {};
+					pm8941_l14: l14 {};
+					pm8941_l15: l15 {};
+					pm8941_l16: l16 {};
+					pm8941_l17: l17 {};
+					pm8941_l18: l18 {};
+					pm8941_l19: l19 {};
+					pm8941_l20: l20 {};
+					pm8941_l21: l21 {};
+					pm8941_l22: l22 {};
+					pm8941_l23: l23 {};
+					pm8941_l24: l24 {};
+
+					pm8941_lvs1: lvs1 {};
+					pm8941_lvs2: lvs2 {};
+					pm8941_lvs3: lvs3 {};
+
+					pm8941_5vs1: 5vs1 {};
+					pm8941_5vs2: 5vs2 {};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 8f1a0b162017..0512f645922e 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -3,15 +3,15 @@
 
 &spmi_bus {
 
-	usid4: pm8841@4 {
-		compatible = "qcom,spmi-pmic";
+	pm8841_0: pm8841@4 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
 		reg = <0x4 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		pm8841_mpps: mpps@a000 {
-			compatible = "qcom,pm8841-mpp";
-			reg = <0xa000 0x400>;
+			compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
@@ -22,13 +22,13 @@
 
 		temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
 		};
 	};
 
-	usid5: pm8841@5 {
-		compatible = "qcom,spmi-pmic";
+	pm8841_1: pm8841@5 {
+		compatible = "qcom,pm8841", "qcom,spmi-pmic";
 		reg = <0x5 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 968f1043d4f5..d95edb6f6265 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -4,31 +4,52 @@
 
 &spmi_bus {
 
-	usid0: pm8941@0 {
-		compatible ="qcom,spmi-pmic";
+	pm8941_0: pm8941@0 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x100>,
-			      <0x6100 0x100>;
+			reg = <0x6000>,
+			      <0x6100>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
 		pwrkey@800 {
 			compatible = "qcom,pm8941-pwrkey";
-			reg = <0x800 0x100>;
+			reg = <0x800>;
 			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 			debounce = <15625>;
 			bias-pull-up;
 		};
 
+		charger@1000 {
+			compatible = "qcom,pm8941-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+		};
+
 		pm8941_gpios: gpios@c000 {
-			compatible = "qcom,pm8941-gpio";
-			reg = <0xc000 0x2400>;
+			compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -70,8 +91,8 @@
 		};
 
 		pm8941_mpps: mpps@a000 {
-			compatible = "qcom,pm8941-mpp";
-			reg = <0xa000 0x800>;
+			compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -86,7 +107,7 @@
 
 		pm8941_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
 			io-channel-names = "thermal";
@@ -95,7 +116,7 @@
 
 		pm8941_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -120,8 +141,7 @@
 
 		pm8941_iadc: iadc@3600 {
 			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
-			reg = <0x3600 0x100>,
-				  <0x12f1 0x1>;
+			reg = <0x3600>;
 			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
 			qcom,external-resistor-micro-ohms = <10000>;
 		};
@@ -133,23 +153,18 @@
 		};
 	};
 
-	usid1: pm8941@1 {
-		compatible = "qcom,spmi-pmic";
+	pm8941_1: pm8941@1 {
+		compatible = "qcom,pm8941", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		wled@d800 {
+		pm8941_wled: wled@d800 {
 			compatible = "qcom,pm8941-wled";
-			reg = <0xd800 0x100>;
+			reg = <0xd800>;
 			label = "backlight";
 
-			qcom,cs-out;
-			qcom,current-limit = <20>;
-			qcom,current-boost-limit = <805>;
-			qcom,switching-freq = <1600>;
-			qcom,ovp = <29>;
-			qcom,num-strings = <2>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 5e240ccc08b7..4e9bd3f88473 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -4,8 +4,8 @@
 
 &spmi_bus {
 
-	usid0: pma8084@0 {
-		compatible = "qcom,spmi-pmic";
+	pma8084_0: pma8084@0 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -19,7 +19,7 @@
 		};
 
 		pma8084_gpios: gpios@c000 {
-			compatible = "qcom,pma8084-gpio";
+			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000 0x1600>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -48,7 +48,7 @@
 		};
 
 		pma8084_mpps: mpps@a000 {
-			compatible = "qcom,pma8084-mpp";
+			compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
 			reg = <0xa000 0x800>;
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -101,8 +101,8 @@
 		};
 	};
 
-	usid1: pma8084@1 {
-		compatible = "qcom,spmi-pmic";
+	pma8084_1: pma8084@1 {
+		compatible = "qcom,pma8084", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 060c32cbd669..89e46ebef1bc 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -152,12 +153,12 @@
 	scif0: serial@e8007000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8007000 64>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 191 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 192 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -165,12 +166,12 @@
 	scif1: serial@e8007800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8007800 64>;
-		interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 195 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 196 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -178,12 +179,12 @@
 	scif2: serial@e8008000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8008000 64>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 200 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -191,12 +192,12 @@
 	scif3: serial@e8008800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8008800 64>;
-		interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 203 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 204 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -204,12 +205,12 @@
 	scif4: serial@e8009000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8009000 64>;
-		interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 207 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 208 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -217,12 +218,12 @@
 	scif5: serial@e8009800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe8009800 64>;
-		interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 211 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 212 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -230,12 +231,12 @@
 	scif6: serial@e800a000 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe800a000 64>;
-		interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 215 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 216 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -243,12 +244,12 @@
 	scif7: serial@e800a800 {
 		compatible = "renesas,scif-r7s72100", "renesas,scif";
 		reg = <0xe800a800 64>;
-		interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 219 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 220 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -256,9 +257,9 @@
 	spi0: spi@e800c800 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800c800 0x24>;
-		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
 		power-domains = <&cpg_clocks>;
@@ -271,9 +272,9 @@
 	spi1: spi@e800d000 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800d000 0x24>;
-		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
 		power-domains = <&cpg_clocks>;
@@ -286,9 +287,9 @@
 	spi2: spi@e800d800 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800d800 0x24>;
-		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
 		power-domains = <&cpg_clocks>;
@@ -301,9 +302,9 @@
 	spi3: spi@e800e000 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800e000 0x24>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
 		power-domains = <&cpg_clocks>;
@@ -316,9 +317,9 @@
 	spi4: spi@e800e800 {
 		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
 		reg = <0xe800e800 0x24>;
-		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error", "rx", "tx";
 		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
 		power-domains = <&cpg_clocks>;
@@ -329,7 +330,7 @@
 	};
 
 	gic: interrupt-controller@e8201000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		#address-cells = <0>;
 		interrupt-controller;
@@ -342,14 +343,14 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfee000 0x44>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 158 IRQ_TYPE_EDGE_RISING>,
-			     <0 159 IRQ_TYPE_EDGE_RISING>,
-			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
 		clock-frequency = <100000>;
 		power-domains = <&cpg_clocks>;
@@ -361,14 +362,14 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfee400 0x44>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 166 IRQ_TYPE_EDGE_RISING>,
-			     <0 167 IRQ_TYPE_EDGE_RISING>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 169 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 170 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
 		clock-frequency = <100000>;
 		power-domains = <&cpg_clocks>;
@@ -380,14 +381,14 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfee800 0x44>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 174 IRQ_TYPE_EDGE_RISING>,
-			     <0 175 IRQ_TYPE_EDGE_RISING>,
-			     <0 176 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 177 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 178 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 179 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
 		clock-frequency = <100000>;
 		power-domains = <&cpg_clocks>;
@@ -399,14 +400,14 @@
 		#size-cells = <0>;
 		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
 		reg = <0xfcfeec00 0x44>;
-		interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 182 IRQ_TYPE_EDGE_RISING>,
-			     <0 183 IRQ_TYPE_EDGE_RISING>,
-			     <0 184 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 185 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 186 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 187 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
 		clock-frequency = <100000>;
 		power-domains = <&cpg_clocks>;
@@ -416,7 +417,7 @@
 	mtu2: timer@fcff0000 {
 		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
 		reg = <0xfcff0000 0x400>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "tgi0a";
 		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
 		clock-names = "fck";
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index a4c425923c05..590257095700 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -23,7 +23,7 @@
 
 	chosen {
 		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scifa0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -110,7 +110,7 @@
 			gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_0>;
 			label = "S16";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu-key {
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index cb4f7b2798fe..6583a1dfca1f 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -29,6 +29,7 @@
 			reg = <0>;
 			clock-frequency = <1500000000>;
 			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2_CA15>;
 		};
 	};
 
@@ -39,10 +40,26 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	L2_CA15: cache-controller@0 {
+		compatible = "cache";
+		clocks = <&cpg_clocks R8A73A4_CLK_Z>;
+		power-domains = <&pd_a3sm>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	L2_CA7: cache-controller@1 {
+		compatible = "cache";
+		clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
+		power-domains = <&pd_a3km>;
+		cache-unified;
+		cache-level = <2>;
 	};
 
 	dbsc1: memory-controller@e6790000 {
@@ -69,27 +86,27 @@
 		dma0: dma-controller@e6700020 {
 			compatible = "renesas,shdma-r8a73a4";
 			reg = <0 0xe6700020 0 0x89e0>;
-			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-					0 200 IRQ_TYPE_LEVEL_HIGH
-					0 201 IRQ_TYPE_LEVEL_HIGH
-					0 202 IRQ_TYPE_LEVEL_HIGH
-					0 203 IRQ_TYPE_LEVEL_HIGH
-					0 204 IRQ_TYPE_LEVEL_HIGH
-					0 205 IRQ_TYPE_LEVEL_HIGH
-					0 206 IRQ_TYPE_LEVEL_HIGH
-					0 207 IRQ_TYPE_LEVEL_HIGH
-					0 208 IRQ_TYPE_LEVEL_HIGH
-					0 209 IRQ_TYPE_LEVEL_HIGH
-					0 210 IRQ_TYPE_LEVEL_HIGH
-					0 211 IRQ_TYPE_LEVEL_HIGH
-					0 212 IRQ_TYPE_LEVEL_HIGH
-					0 213 IRQ_TYPE_LEVEL_HIGH
-					0 214 IRQ_TYPE_LEVEL_HIGH
-					0 215 IRQ_TYPE_LEVEL_HIGH
-					0 216 IRQ_TYPE_LEVEL_HIGH
-					0 217 IRQ_TYPE_LEVEL_HIGH
-					0 218 IRQ_TYPE_LEVEL_HIGH
-					0 219 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+					GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
 					"ch4", "ch5", "ch6", "ch7",
@@ -106,7 +123,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x428>;
-		interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
 		power-domains = <&pd_a3sp>;
 
@@ -116,7 +133,7 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
@@ -131,38 +148,38 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 4 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 5 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 6 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 7 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 8 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 10 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 11 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 23 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
 		power-domains = <&pd_c4>;
 	};
@@ -172,32 +189,32 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0200 0 0x200>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
 		power-domains = <&pd_c4>;
 	};
@@ -237,7 +254,7 @@
 		compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
 			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
 		power-domains = <&pd_c5>;
 	};
@@ -247,7 +264,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x428>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -258,7 +275,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x428>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -269,7 +286,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6520000 0 0x428>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -280,7 +297,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6530000 0 0x428>;
-		interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -291,7 +308,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6540000 0 0x428>;
-		interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -302,7 +319,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6550000 0 0x428>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -313,7 +330,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6560000 0 0x428>;
-		interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -324,7 +341,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
 		reg = <0 0xe6570000 0 0x428>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -333,9 +350,9 @@
 	scifb0: serial@e6c20000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6c20000 0 0x100>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -343,9 +360,9 @@
 	scifb1: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6c30000 0 0x100>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -353,9 +370,9 @@
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
 		reg = <0 0xe6c40000 0 0x100>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -363,9 +380,9 @@
 	scifa1: serial@e6c50000 {
 		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
 		reg = <0 0xe6c50000 0 0x100>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -373,9 +390,9 @@
 	scifb2: serial@e6ce0000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 0x100>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -383,9 +400,9 @@
 	scifb3: serial@e6cf0000 {
 		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
 		reg = <0 0xe6cf0000 0 0x100>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_c4>;
 		status = "disabled";
 	};
@@ -393,7 +410,7 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -403,7 +420,7 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -413,7 +430,7 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -423,7 +440,7 @@
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
@@ -433,7 +450,7 @@
 	mmcif1: mmc@ee220000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
@@ -449,7 +466,7 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	bsc: bus@fec10000 {
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 105d9c95de4a..c548cabb102f 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -85,7 +85,7 @@
 			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "SW3";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		back-key {
@@ -180,7 +180,7 @@
 };
 
 &extal1_clk {
-	clock-frequency = <25000000>;
+	clock-frequency = <24000000>;
 };
 &extal2_clk {
 	clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index e14cb1438216..995fbda74b7a 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -11,6 +11,7 @@
 /include/ "skeleton.dtsi"
 
 #include <dt-bindings/clock/r8a7740-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -26,17 +27,30 @@
 			reg = <0x0>;
 			clock-frequency = <800000000>;
 			power-domains = <&pd_a3sm>;
+			next-level-cache = <&L2>;
 		};
 	};
 
 	gic: interrupt-controller@c2800000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0xc2800000 0x1000>,
 		      <0xc2000000 0x1000>;
 	};
 
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0xf0100000 0x1000>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_a3sm>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		arm,shared-override;
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	dbsc3: memory-controller@fe400000 {
 		compatible = "renesas,dbsc3-r8a7740";
 		reg = <0xfe400000 0x400>;
@@ -45,7 +59,7 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	ptm {
@@ -56,7 +70,7 @@
 	cmt1: timer@e6138000 {
 		compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
 		reg = <0xe6138000 0x170>;
-		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
@@ -76,14 +90,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -98,14 +112,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -120,14 +134,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -142,14 +156,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH
-			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
 		power-domains = <&pd_a4s>;
 	};
@@ -158,7 +172,7 @@
 		compatible = "renesas,gether-r8a7740";
 		reg = <0xe9a00000 0x800>,
 		      <0xe9a01800 0x800>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
 		power-domains = <&pd_a4s>;
 		phy-mode = "mii";
@@ -172,10 +186,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xfff20000 0x425>;
-		interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
 		power-domains = <&pd_a4r>;
 		status = "disabled";
@@ -186,10 +200,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
 		reg = <0xe6c20000 0x425>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
-			      0 71 IRQ_TYPE_LEVEL_HIGH
-			      0 72 IRQ_TYPE_LEVEL_HIGH
-			      0 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -198,9 +212,9 @@
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c40000 0x100>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -208,9 +222,9 @@
 	scifa1: serial@e6c50000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c50000 0x100>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -218,9 +232,9 @@
 	scifa2: serial@e6c60000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c60000 0x100>;
-		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -228,9 +242,9 @@
 	scifa3: serial@e6c70000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c70000 0x100>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -238,9 +252,9 @@
 	scifa4: serial@e6c80000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6c80000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -248,9 +262,9 @@
 	scifa5: serial@e6cb0000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cb0000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -258,9 +272,9 @@
 	scifa6: serial@e6cc0000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cc0000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -268,9 +282,9 @@
 	scifa7: serial@e6cd0000 {
 		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
 		reg = <0xe6cd0000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -278,9 +292,9 @@
 	scifb: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
 		reg = <0xe6c30000 0x100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -316,8 +330,8 @@
 	mmcif0: mmc@e6bd0000 {
 		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
-			      0 57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -326,9 +340,9 @@
 	sdhi0: sd@e6850000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6850000 0x100>;
-		interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
-			      0 118 IRQ_TYPE_LEVEL_HIGH
-			      0 119 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -339,9 +353,9 @@
 	sdhi1: sd@e6860000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6860000 0x100>;
-		interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
-			      0 122 IRQ_TYPE_LEVEL_HIGH
-			      0 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -352,9 +366,9 @@
 	sdhi2: sd@e6870000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6870000 0x100>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
-			      0 126 IRQ_TYPE_LEVEL_HIGH
-			      0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -366,7 +380,7 @@
 		#sound-dai-cells = <1>;
 		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
 		reg = <0xfe1f0000 0x400>;
-		interrupts = <0 9 0x4>;
+		interrupts = <GIC_SPI 9 0x4>;
 		clocks = <&mstp3_clks R8A7740_CLK_FSI>;
 		power-domains = <&pd_a4mp>;
 		status = "disabled";
@@ -375,9 +389,9 @@
 	tmu0: timer@fff80000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff80000 0x2c>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 200 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
@@ -390,9 +404,9 @@
 	tmu1: timer@fff90000 {
 		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
 		reg = <0xfff90000 0x2c>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&pd_a4r>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
deleted file mode 100644
index dffa6ff30360..000000000000
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "bockw";
-	compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
-	aliases {
-		serial0 = &scif0;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
-		stdout-path = &scif0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x10000000>;
-	};
-
-	fixedregulator3v3: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	ethernet@18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
-
-};
-
-&mmcif {
-	pinctrl-0 = <&mmc_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <8>;
-	broken-cd;
-	status = "okay";
-};
-
-&irqpin {
-	status = "okay";
-};
-
-&tmu0 {
-	status = "okay";
-};
-
-&pfc {
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data_a", "scif0_ctrl";
-		renesas,function = "scif0";
-	};
-
-	mmc_pins: mmc {
-		renesas,groups = "mmc_data8", "mmc_ctrl";
-		renesas,function = "mmc";
-	};
-
-	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
-		renesas,function = "sdhi0";
-	};
-
-	hspi0_pins: hspi0 {
-		renesas,groups = "hspi0_a";
-		renesas,function = "hspi0";
-	};
-};
-
-&sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
-
-	vmmc-supply = <&fixedregulator3v3>;
-	bus-width = <4>;
-	status = "okay";
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
-	pinctrl-0 = <&hspi0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl008k", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <104000000>;
-		m25p,fast-read;
-
-		partition@0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
-		};
-	};
-};
-
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 90543b12d7e2..21e3b9dda2da 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -28,8 +28,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
-		stdout-path = &scif0;
+		bootargs = "ignore_loglevel ip=dhcp root=/dev/nfs rw";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -126,20 +126,32 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_a", "scif0_ctrl";
 		renesas,function = "scif0";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	mmc_pins: mmc {
 		renesas,groups = "mmc_data8", "mmc_ctrl";
 		renesas,function = "mmc";
 	};
 
 	sdhi0_pins: sd0 {
-		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
-				  "sdhi0_cd";
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+	sdhi0_pup_pins: sd0_pup {
+		renesas,groups = "sdhi0_cd", "sdhi0_wp";
 		renesas,function = "sdhi0";
+		bias-pull-up;
 	};
 
 	hspi0_pins: hspi0 {
@@ -168,8 +180,13 @@
 	};
 };
 
+&rcar_sound {
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+};
+
 &sdhi0 {
-	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-0 = <&sdhi0_pins>, <&sdhi0_pup_pins>;
 	pinctrl-names = "default";
 
 	vmmc-supply = <&fixedregulator3v3>;
@@ -184,16 +201,20 @@
 	status = "okay";
 
 	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl008k", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "data(spi)";
-			reg = <0x00000000 0x00100000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "data(spi)";
+				reg = <0x00000000 0x00100000>;
+			};
 		};
 	};
 };
@@ -204,3 +225,8 @@
 
 	status = "okay";
 };
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 4b1fa9f42ad5..f83a348fc07a 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -17,6 +17,7 @@
 /include/ "skeleton.dtsi"
 
 #include <dt-bindings/clock/r8a7778-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
@@ -51,7 +52,7 @@
 	ether: ethernet@fde00000 {
 		compatible = "renesas,ether-r8a7778";
 		reg = <0xfde00000 0x400>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
 		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
@@ -61,7 +62,7 @@
 	};
 
 	gic: interrupt-controller@fe438000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0xfe438000 0x1000>,
@@ -79,17 +80,17 @@
 			<0xfe780024 4>,
 			<0xfe780044 4>,
 			<0xfe780064 4>;
-		interrupts =   <0 27 IRQ_TYPE_LEVEL_HIGH
-				0 28 IRQ_TYPE_LEVEL_HIGH
-				0 29 IRQ_TYPE_LEVEL_HIGH
-				0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =   <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
 	gpio0: gpio@ffc40000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc40000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
@@ -100,7 +101,7 @@
 	gpio1: gpio@ffc41000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc41000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
@@ -111,7 +112,7 @@
 	gpio2: gpio@ffc42000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc42000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
@@ -122,7 +123,7 @@
 	gpio3: gpio@ffc43000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc43000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
@@ -133,7 +134,7 @@
 	gpio4: gpio@ffc44000 {
 		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
 		reg = <0xffc44000 0x2c>;
-		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 27>;
@@ -151,7 +152,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc70000 0x1000>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -162,7 +163,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc71000 0x1000>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -173,7 +174,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc72000 0x1000>;
-		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -184,7 +185,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7778";
 		reg = <0xffc73000 0x1000>;
-		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -193,9 +194,9 @@
 	tmu0: timer@ffd80000 {
 		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
 		reg = <0xffd80000 0x30>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -208,9 +209,9 @@
 	tmu1: timer@ffd81000 {
 		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
 		reg = <0xffd81000 0x30>;
-		interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -223,9 +224,9 @@
 	tmu2: timer@ffd82000 {
 		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
 		reg = <0xffd82000 0x30>;
-		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -236,10 +237,15 @@
 	};
 
 	rcar_sound: sound@ffd90000 {
-		#sound-dai-cells = <1>;
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
 		compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
 		reg =	<0xffd90000 0x1000>,	/* SRU */
-			<0xffd91000 0x1240>,	/* SSI */
+			<0xffd91000 0x240>,	/* SSI */
 			<0xfffe0000 0x24>;	/* ADG */
 		clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
 			<&mstp3_clks R8A7778_CLK_SSI7>,
@@ -280,72 +286,84 @@
 		};
 
 		rcar_sound,ssi {
-			ssi3: ssi@3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi4: ssi@4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi5: ssi@5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi6: ssi@6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi7: ssi@7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi8: ssi@8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
-			ssi9: ssi@9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
 		};
 	};
 
 	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe40000 0x100>;
-		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF0>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe41000 0x100>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF1>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe42000 0x100>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF2>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe43000 0x100>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF3>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe44000 0x100>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF4>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe45000 0x100>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7778_CLK_SCIF5>,
+			 <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -353,7 +371,7 @@
 	mmcif: mmc@ffe4e000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0xffe4e000 0x100>;
-		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_MMC>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -362,7 +380,7 @@
 	sdhi0: sd@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4c000 0x100>;
-		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -371,7 +389,7 @@
 	sdhi1: sd@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4d000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -380,7 +398,7 @@
 	sdhi2: sd@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7778";
 		reg = <0xffe4f000 0x100>;
-		interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -389,7 +407,7 @@
 	hspi0: spi@fffc7000 {
 		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
 		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
@@ -400,7 +418,7 @@
 	hspi1: spi@fffc8000 {
 		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
 		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
@@ -411,7 +429,7 @@
 	hspi2: spi@fffc6000 {
 		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
 		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
@@ -432,6 +450,15 @@
 			clock-output-names = "extal";
 		};
 
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@ffc80000 {
 			compatible = "renesas,r8a7778-cpg-clocks";
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 20afea6f06ef..e111d35d02ae 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -19,12 +19,12 @@
 	compatible = "renesas,marzen", "renesas,r8a7779";
 
 	aliases {
-		serial2 = &scif2;
-		serial4 = &scif4;
+		serial0 = &scif2;
+		serial1 = &scif4;
 	};
 
 	chosen {
-		bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
+		bootargs = "ignore_loglevel root=/dev/nfs ip=on";
 		stdout-path = &scif2;
 	};
 
@@ -165,6 +165,9 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	du_pins: du {
 		du0 {
 			renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
@@ -176,6 +179,11 @@
 		};
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk_b";
+		renesas,function = "scif_clk";
+	};
+
 	ethernet_pins: ethernet {
 		intc {
 			renesas,groups = "intc_irq1_b";
@@ -222,6 +230,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 6afa909865b5..a0cc08e6295b 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -74,7 +74,7 @@
 	gpio0: gpio@ffc40000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc40000 0x2c>;
-		interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
@@ -85,7 +85,7 @@
 	gpio1: gpio@ffc41000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc41000 0x2c>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
@@ -96,7 +96,7 @@
 	gpio2: gpio@ffc42000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc42000 0x2c>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
@@ -107,7 +107,7 @@
 	gpio3: gpio@ffc43000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc43000 0x2c>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
@@ -118,7 +118,7 @@
 	gpio4: gpio@ffc44000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc44000 0x2c>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
@@ -129,7 +129,7 @@
 	gpio5: gpio@ffc45000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc45000 0x2c>;
-		interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
@@ -140,7 +140,7 @@
 	gpio6: gpio@ffc46000 {
 		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
 		reg = <0xffc46000 0x2c>;
-		interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 192 9>;
@@ -159,10 +159,10 @@
 			<0xfe780044 4>,
 			<0xfe780064 4>,
 			<0xfe780000 4>;
-		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		sense-bitfield-width = <2>;
 	};
 
@@ -171,7 +171,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc70000 0x1000>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -182,7 +182,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc71000 0x1000>;
-		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -193,7 +193,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc72000 0x1000>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -204,68 +204,80 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7779";
 		reg = <0xffc73000 0x1000>;
-		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif0: serial@ffe40000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe40000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif1: serial@ffe41000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe41000 0x100>;
-		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif2: serial@ffe42000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe42000 0x100>;
-		interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif3: serial@ffe43000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe43000 0x100>;
-		interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif4: serial@ffe44000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe44000 0x100>;
-		interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif5: serial@ffe45000 {
-		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+			     "renesas,scif";
 		reg = <0xffe45000 0x100>;
-		interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
+			 <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -283,9 +295,9 @@
 	tmu0: timer@ffd80000 {
 		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
 		reg = <0xffd80000 0x30>;
-		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -298,9 +310,9 @@
 	tmu1: timer@ffd81000 {
 		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
 		reg = <0xffd81000 0x30>;
-		interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -313,9 +325,9 @@
 	tmu2: timer@ffd82000 {
 		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
 		reg = <0xffd82000 0x30>;
-		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -328,7 +340,7 @@
 	sata: sata@fc600000 {
 		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
 		reg = <0xfc600000 0x2000>;
-		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
 		power-domains = <&cpg_clocks>;
 	};
@@ -336,7 +348,7 @@
 	sdhi0: sd@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4c000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -345,7 +357,7 @@
 	sdhi1: sd@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4d000 0x100>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -354,7 +366,7 @@
 	sdhi2: sd@ffe4e000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4e000 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -363,7 +375,7 @@
 	sdhi3: sd@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7779";
 		reg = <0xffe4f000 0x100>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -372,7 +384,7 @@
 	hspi0: spi@fffc7000 {
 		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc7000 0x18>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
@@ -383,7 +395,7 @@
 	hspi1: spi@fffc8000 {
 		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc8000 0x18>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
@@ -394,7 +406,7 @@
 	hspi2: spi@fffc6000 {
 		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
 		reg = <0xfffc6000 0x18>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
@@ -405,7 +417,7 @@
 	du: display@fff80000 {
 		compatible = "renesas,du-r8a7779";
 		reg = <0 0xfff80000 0 0x40000>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_DU>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -441,6 +453,15 @@
 			clock-output-names = "extal";
 		};
 
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: clocks@ffc80000 {
 			compatible = "renesas,r8a7779-cpg-clocks";
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 37dec5269491..aa6ca92a9485 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
  * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2015-2016 Renesas Electronics Corporation
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -47,13 +48,14 @@
 	compatible = "renesas,lager", "renesas,r8a7790";
 
 	aliases {
-		serial0 = &scifa0;
+		serial0 = &scif0;
 		serial1 = &scifa1;
+		i2c8 = "i2cexio";
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scifa0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -77,28 +79,28 @@
 		button@1 {
 			linux,code = <KEY_1>;
 			label = "SW2-1";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 		button@2 {
 			linux,code = <KEY_2>;
 			label = "SW2-2";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 		};
 		button@3 {
 			linux,code = <KEY_3>;
 			label = "SW2-3";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
 		};
 		button@4 {
 			linux,code = <KEY_4>;
 			label = "SW2-4";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 		};
@@ -174,6 +176,13 @@
 			  1800000 0>;
 	};
 
+	audio_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
 	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
@@ -187,7 +196,7 @@
 
 		sndcodec: simple-audio-card,codec {
 			sound-dai = <&ak4643>;
-			system-clock-frequency = <11289600>;
+			clocks = <&audio_clock>;
 		};
 	};
 
@@ -245,6 +254,23 @@
 		#clock-cells = <0>;
 		clock-frequency = <148500000>;
 	};
+
+	/*
+	 * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
+	 * We use the I2C demuxer, so the desired IP core can be selected at runtime
+	 * depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
+	 * Note: For testing the I2C slave feature, it is convenient to connect this
+	 * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
+	 * instantiate the slave device at runtime according to the documentation.
+	 * You can then communicate with the slave via IIC3.
+	 */
+	i2cexio: i2c@8 {
+		compatible = "i2c-demux-pinctrl";
+		i2c-parent = <&iic0>, <&i2c0>;
+		i2c-bus-name = "i2c-exio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
 
 &du {
@@ -284,14 +310,22 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	du_pins: du {
 		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
 		renesas,function = "du";
 	};
 
-	scifa0_pins: serial0 {
-		renesas,groups = "scifa0_data";
-		renesas,function = "scifa0";
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data";
+		renesas,function = "scif0";
+	};
+
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
 	};
 
 	ether_pins: ether {
@@ -335,6 +369,16 @@
 		renesas,function = "msiof1";
 	};
 
+	i2c0_pins: i2c0 {
+		renesas,groups = "i2c0";
+		renesas,function = "i2c0";
+	};
+
+	iic0_pins: iic0 {
+		renesas,groups = "iic0";
+		renesas,function = "iic0";
+	};
+
 	iic1_pins: iic1 {
 		renesas,groups = "iic1";
 		renesas,function = "iic1";
@@ -427,8 +471,6 @@
 	status = "okay";
 
 	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
@@ -438,25 +480,31 @@
 		spi-cpol;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash";
-			reg = <0x00440000 0x03bc0000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
 		};
 	};
 };
 
-&scifa0 {
-	pinctrl-0 = <&scifa0_pins>;
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -469,6 +517,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &msiof1 {
 	pinctrl-0 = <&msiof1_pins>;
 	pinctrl-names = "default";
@@ -508,8 +561,14 @@
 	cpu0-supply = <&vdd_dvfs>;
 };
 
+&i2c0	{
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "i2c-exio";
+};
+
 &iic0	{
-	status = "okay";
+	pinctrl-0 = <&iic0_pins>;
+	pinctrl-names = "i2c-exio";
 };
 
 &iic1	{
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4624d0f2a754..38b706399a6b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -52,6 +52,7 @@
 			voltage-tolerance = <1>; /* 1% */
 			clocks = <&cpg_clocks R8A7790_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
+			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1400000 1000000>,
@@ -67,6 +68,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1300000000>;
+			next-level-cache = <&L2_CA15>;
 		};
 
 		cpu2: cpu@2 {
@@ -74,6 +76,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <2>;
 			clock-frequency = <1300000000>;
+			next-level-cache = <&L2_CA15>;
 		};
 
 		cpu3: cpu@3 {
@@ -81,6 +84,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <3>;
 			clock-frequency = <1300000000>;
+			next-level-cache = <&L2_CA15>;
 		};
 
 		cpu4: cpu@4 {
@@ -88,6 +92,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			clock-frequency = <780000000>;
+			next-level-cache = <&L2_CA7>;
 		};
 
 		cpu5: cpu@5 {
@@ -95,6 +100,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			clock-frequency = <780000000>;
+			next-level-cache = <&L2_CA7>;
 		};
 
 		cpu6: cpu@6 {
@@ -102,6 +108,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			clock-frequency = <780000000>;
+			next-level-cache = <&L2_CA7>;
 		};
 
 		cpu7: cpu@7 {
@@ -109,9 +116,41 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
 			clock-frequency = <780000000>;
+			next-level-cache = <&L2_CA7>;
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <115000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	L2_CA15: cache-controller@0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	L2_CA7: cache-controller@1 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -121,13 +160,13 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
@@ -140,10 +179,10 @@
 	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
+		gpio-ranges = <&pfc 0 32 30>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
@@ -153,10 +192,10 @@
 	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 64 32>;
+		gpio-ranges = <&pfc 0 64 30>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
@@ -166,7 +205,7 @@
 	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
@@ -179,7 +218,7 @@
 	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
@@ -192,7 +231,7 @@
 	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
 		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
@@ -202,27 +241,30 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7790",
+				"renesas,rcar-gen2-thermal",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -235,14 +277,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -257,33 +299,33 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
 		power-domains = <&cpg_clocks>;
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -297,24 +339,24 @@
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -328,22 +370,22 @@
 	};
 
 	audma0: dma-controller@ec700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xec700000 0 0x10000>;
-		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
-				 0 320 IRQ_TYPE_LEVEL_HIGH
-				 0 321 IRQ_TYPE_LEVEL_HIGH
-				 0 322 IRQ_TYPE_LEVEL_HIGH
-				 0 323 IRQ_TYPE_LEVEL_HIGH
-				 0 324 IRQ_TYPE_LEVEL_HIGH
-				 0 325 IRQ_TYPE_LEVEL_HIGH
-				 0 326 IRQ_TYPE_LEVEL_HIGH
-				 0 327 IRQ_TYPE_LEVEL_HIGH
-				 0 328 IRQ_TYPE_LEVEL_HIGH
-				 0 329 IRQ_TYPE_LEVEL_HIGH
-				 0 330 IRQ_TYPE_LEVEL_HIGH
-				 0 331 IRQ_TYPE_LEVEL_HIGH
-				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -357,22 +399,22 @@
 	};
 
 	audma1: dma-controller@ec720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
 		reg = <0 0xec720000 0 0x10000>;
-		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
-				 0 333 IRQ_TYPE_LEVEL_HIGH
-				 0 334 IRQ_TYPE_LEVEL_HIGH
-				 0 335 IRQ_TYPE_LEVEL_HIGH
-				 0 336 IRQ_TYPE_LEVEL_HIGH
-				 0 337 IRQ_TYPE_LEVEL_HIGH
-				 0 338 IRQ_TYPE_LEVEL_HIGH
-				 0 339 IRQ_TYPE_LEVEL_HIGH
-				 0 340 IRQ_TYPE_LEVEL_HIGH
-				 0 341 IRQ_TYPE_LEVEL_HIGH
-				 0 342 IRQ_TYPE_LEVEL_HIGH
-				 0 343 IRQ_TYPE_LEVEL_HIGH
-				 0 344 IRQ_TYPE_LEVEL_HIGH
-				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -386,10 +428,10 @@
 	};
 
 	usb_dmac0: dma-controller@e65a0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65a0000 0 0x100>;
-		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
-			      0 109 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
 		power-domains = <&cpg_clocks>;
@@ -398,10 +440,10 @@
 	};
 
 	usb_dmac1: dma-controller@e65b0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65b0000 0 0x100>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
-			      0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
 		power-domains = <&cpg_clocks>;
@@ -414,9 +456,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <110>;
 		status = "disabled";
 	};
 
@@ -425,9 +468,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -436,9 +480,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -447,9 +492,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7790";
 		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <110>;
 		status = "disabled";
 	};
 
@@ -458,7 +504,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
 		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
 		dma-names = "tx", "rx";
@@ -471,7 +517,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
 		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
 		dma-names = "tx", "rx";
@@ -484,7 +530,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe6520000 0 0x425>;
-		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
 		dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
 		dma-names = "tx", "rx";
@@ -497,7 +543,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
 		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
 		dma-names = "tx", "rx";
@@ -508,7 +554,7 @@
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
 		dma-names = "tx", "rx";
@@ -521,7 +567,7 @@
 	mmcif1: mmc@ee220000 {
 		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
 		reg = <0 0xee220000 0 0x80>;
-		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
 		dma-names = "tx", "rx";
@@ -539,7 +585,7 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee100000 0 0x328>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
 		dma-names = "tx", "rx";
@@ -550,7 +596,7 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee120000 0 0x328>;
-		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
 		dma-names = "tx", "rx";
@@ -561,7 +607,7 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
 		dma-names = "tx", "rx";
@@ -572,7 +618,7 @@
 	sdhi3: sd@ee160000 {
 		compatible = "renesas,sdhi-r8a7790";
 		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
 		dma-names = "tx", "rx";
@@ -581,11 +627,12 @@
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7790",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -593,11 +640,12 @@
 	};
 
 	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7790",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -605,11 +653,12 @@
 	};
 
 	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7790",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -617,11 +666,12 @@
 	};
 
 	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7790",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -629,11 +679,12 @@
 	};
 
 	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7790",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -641,11 +692,12 @@
 	};
 
 	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7790",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -653,11 +705,13 @@
 	};
 
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -665,11 +719,13 @@
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -677,11 +733,13 @@
 	};
 
 	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7790",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -689,11 +747,13 @@
 	};
 
 	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7790",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -703,7 +763,7 @@
 	ether: ethernet@ee700000 {
 		compatible = "renesas,ether-r8a7790";
 		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
 		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
@@ -713,9 +773,10 @@
 	};
 
 	avb: ethernet@e6800000 {
-		compatible = "renesas,etheravb-r8a7790";
+		compatible = "renesas,etheravb-r8a7790",
+			     "renesas,etheravb-rcar-gen2";
 		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
-		interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
 		power-domains = <&cpg_clocks>;
 		#address-cells = <1>;
@@ -726,7 +787,7 @@
 	sata0: sata@ee300000 {
 		compatible = "renesas,sata-r8a7790";
 		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -735,16 +796,16 @@
 	sata1: sata@ee500000 {
 		compatible = "renesas,sata-r8a7790";
 		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	hsusb: usb@e6590000 {
-		compatible = "renesas,usbhs-r8a7790";
+		compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
 		reg = <0 0xe6590000 0 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
 		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
 		       <&usb_dmac1 0>, <&usb_dmac1 1>;
@@ -779,7 +840,7 @@
 	vin0: video@e6ef0000 {
 		compatible = "renesas,vin-r8a7790";
 		reg = <0 0xe6ef0000 0 0x1000>;
-		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -788,7 +849,7 @@
 	vin1: video@e6ef1000 {
 		compatible = "renesas,vin-r8a7790";
 		reg = <0 0xe6ef1000 0 0x1000>;
-		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -797,7 +858,7 @@
 	vin2: video@e6ef2000 {
 		compatible = "renesas,vin-r8a7790";
 		reg = <0 0xe6ef2000 0 0x1000>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -806,7 +867,7 @@
 	vin3: video@e6ef3000 {
 		compatible = "renesas,vin-r8a7790";
 		reg = <0 0xe6ef3000 0 0x1000>;
-		interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -815,7 +876,7 @@
 	vsp1@fe920000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe920000 0 0x8000>;
-		interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
 		power-domains = <&cpg_clocks>;
 
@@ -828,7 +889,7 @@
 	vsp1@fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
-		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
 		power-domains = <&cpg_clocks>;
 
@@ -842,7 +903,7 @@
 	vsp1@fe930000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe930000 0 0x8000>;
-		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
 		power-domains = <&cpg_clocks>;
 
@@ -856,7 +917,7 @@
 	vsp1@fe938000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe938000 0 0x8000>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
 		power-domains = <&cpg_clocks>;
 
@@ -873,9 +934,9 @@
 		      <0 0xfeb90000 0 0x1c>,
 		      <0 0xfeb94000 0 0x1c>;
 		reg-names = "du", "lvds.0", "lvds.1";
-		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
 			 <&mstp7_clks R8A7790_CLK_DU1>,
 			 <&mstp7_clks R8A7790_CLK_DU2>,
@@ -909,7 +970,7 @@
 	can0: can@e6e80000 {
 		compatible = "renesas,can-r8a7790";
 		reg = <0 0xe6e80000 0 0x1000>;
-		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
 			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
@@ -920,7 +981,7 @@
 	can1: can@e6e88000 {
 		compatible = "renesas,can-r8a7790";
 		reg = <0 0xe6e88000 0 0x1000>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
 			 <&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
@@ -931,7 +992,7 @@
 	jpu: jpeg-codec@fe980000 {
 		compatible = "renesas,jpu-r8a7790";
 		reg = <0 0xfe980000 0 0x10300>;
-		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_JPU>;
 		power-domains = <&cpg_clocks>;
 	};
@@ -982,6 +1043,15 @@
 			clock-output-names = "audio_clk_c";
 		};
 
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
 		/* External USB clock - can be overridden by the board */
 		usb_extal_clk: usb_extal_clk {
 			compatible = "fixed-clock";
@@ -1397,7 +1467,7 @@
 	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7790", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
 		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
 		dma-names = "tx", "rx";
@@ -1411,7 +1481,7 @@
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
 		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
 		dma-names = "tx", "rx";
@@ -1424,7 +1494,7 @@
 	msiof1: spi@e6e10000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
 		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
 		dma-names = "tx", "rx";
@@ -1437,7 +1507,7 @@
 	msiof2: spi@e6e00000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
 		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
 		dma-names = "tx", "rx";
@@ -1450,7 +1520,7 @@
 	msiof3: spi@e6c90000 {
 		compatible = "renesas,msiof-r8a7790";
 		reg = <0 0xe6c90000 0 0x0064>;
-		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
 		dmas = <&dmac0 0x45>, <&dmac0 0x46>;
 		dma-names = "tx", "rx";
@@ -1463,7 +1533,7 @@
 	xhci: usb@ee000000 {
 		compatible = "renesas,xhci-r8a7790";
 		reg = <0 0xee000000 0 0xc00>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
 		power-domains = <&cpg_clocks>;
 		phys = <&usb2 1>;
@@ -1472,11 +1542,11 @@
 	};
 
 	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7790";
+		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
 		device_type = "pci";
 		reg = <0 0xee090000 0 0xc00>,
 		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -1487,9 +1557,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1507,11 +1577,11 @@
 	};
 
 	pci1: pci@ee0b0000 {
-		compatible = "renesas,pci-r8a7790";
+		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
 		device_type = "pci";
 		reg = <0 0xee0b0000 0 0xc00>,
 		      <0 0xee0a0000 0 0x1100>;
-		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -1522,19 +1592,19 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	pci2: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7790";
+		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
 		device_type = "pci";
 		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
 		power-domains = <&cpg_clocks>;
 		reg = <0 0xee0d0000 0 0xc00>,
 		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 
 		bus-range = <2 2>;
@@ -1543,9 +1613,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1563,7 +1633,7 @@
 	};
 
 	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7790";
+		compatible = "renesas,pcie-r8a7790", "renesas,pcie-rcar-gen2";
 		reg = <0 0xfe000000 0 0x80000>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1576,12 +1646,12 @@
 		/* Map all possible DDR as inbound ranges */
 		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
 			      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
 		clock-names = "pcie", "pcie_bus";
 		power-domains = <&cpg_clocks>;
@@ -1599,7 +1669,7 @@
 		reg =	<0 0xec500000 0 0x1000>, /* SCU */
 			<0 0xec5a0000 0 0x100>,  /* ADG */
 			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>, /* SSI */
+			<0 0xec541000 0 0x280>,  /* SSI */
 			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
 		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
@@ -1660,52 +1730,52 @@
 
 		rcar_sound,src {
 			src0: src@0 {
-				interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x85>, <&audma1 0x9a>;
 				dma-names = "rx", "tx";
 			};
 			src1: src@1 {
-				interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma1 0x9c>;
 				dma-names = "rx", "tx";
 			};
 			src2: src@2 {
-				interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma1 0x9e>;
 				dma-names = "rx", "tx";
 			};
 			src3: src@3 {
-				interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 				dma-names = "rx", "tx";
 			};
 			src4: src@4 {
-				interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 				dma-names = "rx", "tx";
 			};
 			src5: src@5 {
-				interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 				dma-names = "rx", "tx";
 			};
 			src6: src@6 {
-				interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma1 0xb4>;
 				dma-names = "rx", "tx";
 			};
 			src7: src@7 {
-				interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x93>, <&audma1 0xb6>;
 				dma-names = "rx", "tx";
 			};
 			src8: src@8 {
-				interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x95>, <&audma1 0xb8>;
 				dma-names = "rx", "tx";
 			};
 			src9: src@9 {
-				interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x97>, <&audma1 0xba>;
 				dma-names = "rx", "tx";
 			};
@@ -1713,52 +1783,52 @@
 
 		rcar_sound,ssi {
 			ssi0: ssi@0 {
-				interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi1: ssi@1 {
-				 interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi2: ssi@2 {
-				interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi3: ssi@3 {
-				interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi4: ssi@4 {
-				interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi5: ssi@5 {
-				interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi6: ssi@6 {
-				interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi7: ssi@7 {
-				interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi8: ssi@8 {
-				interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi9: ssi@9 {
-				interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
@@ -1766,52 +1836,52 @@
 	};
 
 	ipmmu_sy0: mmu@e6280000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6280000 0 0x1000>;
-		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_sy1: mmu@e6290000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6290000 0 0x1000>;
-		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_ds: mmu@e6740000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6740000 0 0x1000>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mp: mmu@ec680000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xec680000 0 0x1000>;
-		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mx: mmu@fe951000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xfe951000 0 0x1000>;
-		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_rt: mmu@ffc80000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
 		reg = <0 0xffc80000 0 0x1000>;
-		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index dc158845afdc..0ad71b81d3a2 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -54,7 +54,7 @@
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -79,77 +79,77 @@
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_1>;
 			label = "SW2-1";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-2 {
 			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_2>;
 			label = "SW2-2";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-3 {
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_3>;
 			label = "SW2-3";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-4 {
 			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_4>;
 			label = "SW2-4";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-a {
 			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_A>;
 			label = "SW30";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-b {
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_B>;
 			label = "SW31";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-c {
 			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_C>;
 			label = "SW32";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-d {
 			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_D>;
 			label = "SW33";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-e {
 			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_E>;
 			label = "SW34";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-f {
 			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_F>;
 			label = "SW35";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-g {
 			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_G>;
 			label = "SW36";
-			gpio-key,wakeup;
+			wakeup-source;
 			debounce-interval = <20>;
 		};
 	};
@@ -242,6 +242,13 @@
 			  1800000 0>;
 	};
 
+	audio_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
 	rsnd_ak4643: sound {
 		compatible = "simple-audio-card";
 
@@ -255,7 +262,7 @@
 
 		sndcodec: simple-audio-card,codec {
 			sound-dai = <&ak4643>;
-			system-clock-frequency = <11289600>;
+			clocks = <&audio_clock>;
 		};
 	};
 
@@ -313,13 +320,16 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	i2c2_pins: i2c2 {
 		renesas,groups = "i2c2";
 		renesas,function = "i2c2";
 	};
 
 	du_pins: du {
-		renesas,groups = "du_rgb666", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 		renesas,function = "du";
 	};
 
@@ -333,6 +343,11 @@
 		renesas,function = "scif1";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -433,6 +448,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
@@ -472,8 +492,6 @@
 	status = "okay";
 
 	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
@@ -483,19 +501,25 @@
 		spi-cpol;
 		m25p,fast-read;
 
-		partition@0 {
-			label = "loader";
-			reg = <0x00000000 0x00080000>;
-			read-only;
-		};
-		partition@80000 {
-			label = "user";
-			reg = <0x00080000 0x00580000>;
-			read-only;
-		};
-		partition@600000 {
-			label = "flash";
-			reg = <0x00600000 0x03a00000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x00580000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "flash";
+				reg = <0x00600000 0x03a00000>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 655d1804e5e9..6c08314427d6 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -1,29 +1,39 @@
 /*
- * Device Tree Source for the Henninger board
+ * Device Tree Source for the Porter board
  *
- * Copyright (C) 2014 Renesas Solutions Corp.
- * Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2015 Cogent Embedded, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4642
+ *
+ * JP3: 2-1: AK4642
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7791.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Henninger";
-	compatible = "renesas,henninger", "renesas,r8a7791";
+	model = "Porter";
+	compatible = "renesas,porter", "renesas,r8a7791";
 
 	aliases {
 		serial0 = &scif0;
 	};
 
 	chosen {
-		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif0;
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -79,6 +89,53 @@
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x14_clk: x14-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4642>;
+			clocks = <&x14_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -86,11 +143,19 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -111,20 +176,14 @@
 		renesas,function = "sdhi2";
 	};
 
-	i2c2_pins: i2c2 {
-		renesas,groups = "i2c2";
-		renesas,function = "i2c2";
-	};
-
 	qspi_pins: spi0 {
 		renesas,groups = "qspi_ctrl", "qspi_data4";
 		renesas,function = "qspi";
 	};
 
-	msiof0_pins: spi1 {
-		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
-				 "msiof0_tx";
-		renesas,function = "msiof0";
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
 	};
 
 	usb0_pins: usb0 {
@@ -146,6 +205,21 @@
 		renesas,groups = "can0_data";
 		renesas,function = "can0";
 	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
+	ssi_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
 };
 
 &scif0 {
@@ -155,13 +229,18 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";
 
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
-	status = "okay";
+	status = "ok";
 
 	phy1: ethernet-phy@1 {
 		reg = <1>;
@@ -171,10 +250,6 @@
 	};
 };
 
-&sata0 {
-	status = "okay";
-};
-
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-names = "default";
@@ -196,6 +271,43 @@
 	status = "okay";
 };
 
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader_prg";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user_prg";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash_fs";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
@@ -203,6 +315,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4642: codec@12 {
+		compatible = "asahi-kasei,ak4642";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -215,73 +333,80 @@
 			};
 		};
 	};
-};
-
-&qspi {
-	pinctrl-0 = <&qspi_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
 
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "spansion,s25fl512s", "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <30000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-		m25p,fast-read;
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
 
-		partition@0 {
-			label = "loader_prg";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-		partition@40000 {
-			label = "user_prg";
-			reg = <0x00040000 0x00400000>;
-			read-only;
-		};
-		partition@440000 {
-			label = "flash_fs";
-			reg = <0x00440000 0x03bc0000>;
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
 		};
 	};
 };
 
-&msiof0 {
-	pinctrl-0 = <&msiof0_pins>;
+&sata0 {
+	status = "okay";
+};
+
+/* composite video input */
+&vin0 {
+	status = "ok";
+	pinctrl-0 = <&vin0_pins>;
 	pinctrl-names = "default";
 
-	status = "okay";
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-	pmic@0 {
-		compatible = "renesas,r2a11302ft";
-		reg = <0>;
-		spi-max-frequency = <6000000>;
-		spi-cpol;
-		spi-cpha;
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
 	};
 };
 
 &pci0 {
-	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
+
+	status = "okay";
 };
 
 &pci1 {
-	status = "okay";
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
+
+	status = "okay";
 };
 
 &hsusb {
-	status = "okay";
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+
+	status = "okay";
 };
 
 &usbphy {
@@ -296,25 +421,50 @@
 	status = "okay";
 };
 
-/* composite video input */
-&vin0 {
-	status = "okay";
-	pinctrl-0 = <&vin0_pins>;
+&can0 {
+	pinctrl-0 = <&can0_pins>;
 	pinctrl-names = "default";
 
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	status = "okay";
+};
 
-		vin0ep: endpoint {
-			remote-endpoint = <&adv7180>;
-			bus-width = <8>;
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		 <&mstp7_clks R8A7791_CLK_DU1>,
+		 <&mstp7_clks R8A7791_CLK_LVDS0>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
 		};
 	};
 };
 
-&can0 {
-	pinctrl-0 = <&can0_pins>;
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
 };
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 1666c8a6b143..6439f0569fe2 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -51,6 +51,7 @@
 			voltage-tolerance = <1>; /* 1% */
 			clocks = <&cpg_clocks R8A7791_CLK_Z>;
 			clock-latency = <300000>; /* 300 us */
+			next-level-cache = <&L2_CA15>;
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1500000 1000000>,
@@ -66,9 +67,35 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1500000000>;
+			next-level-cache = <&L2_CA15>;
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <115000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
+	};
+
+	L2_CA15: cache-controller@0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -78,13 +105,13 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	gpio0: gpio@e6050000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6050000 0 0x50>;
-		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
@@ -97,10 +124,10 @@
 	gpio1: gpio@e6051000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6051000 0 0x50>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
-		gpio-ranges = <&pfc 0 32 32>;
+		gpio-ranges = <&pfc 0 32 26>;
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
@@ -110,7 +137,7 @@
 	gpio2: gpio@e6052000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6052000 0 0x50>;
-		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
@@ -123,7 +150,7 @@
 	gpio3: gpio@e6053000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6053000 0 0x50>;
-		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
@@ -136,7 +163,7 @@
 	gpio4: gpio@e6054000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6054000 0 0x50>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 32>;
@@ -149,7 +176,7 @@
 	gpio5: gpio@e6055000 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055000 0 0x50>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 160 32>;
@@ -162,7 +189,7 @@
 	gpio6: gpio@e6055400 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055400 0 0x50>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 192 32>;
@@ -175,7 +202,7 @@
 	gpio7: gpio@e6055800 {
 		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
 		reg = <0 0xe6055800 0 0x50>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 224 26>;
@@ -185,27 +212,30 @@
 		power-domains = <&cpg_clocks>;
 	};
 
-	thermal@e61f0000 {
-		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7791",
+				"renesas,rcar-gen2-thermal",
+				"renesas,rcar-thermal";
 		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
 		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -218,14 +248,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -240,39 +270,39 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
 		power-domains = <&cpg_clocks>;
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -286,24 +316,24 @@
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -317,22 +347,22 @@
 	};
 
 	audma0: dma-controller@ec700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xec700000 0 0x10000>;
-		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
-				 0 320 IRQ_TYPE_LEVEL_HIGH
-				 0 321 IRQ_TYPE_LEVEL_HIGH
-				 0 322 IRQ_TYPE_LEVEL_HIGH
-				 0 323 IRQ_TYPE_LEVEL_HIGH
-				 0 324 IRQ_TYPE_LEVEL_HIGH
-				 0 325 IRQ_TYPE_LEVEL_HIGH
-				 0 326 IRQ_TYPE_LEVEL_HIGH
-				 0 327 IRQ_TYPE_LEVEL_HIGH
-				 0 328 IRQ_TYPE_LEVEL_HIGH
-				 0 329 IRQ_TYPE_LEVEL_HIGH
-				 0 330 IRQ_TYPE_LEVEL_HIGH
-				 0 331 IRQ_TYPE_LEVEL_HIGH
-				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -346,22 +376,22 @@
 	};
 
 	audma1: dma-controller@ec720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
 		reg = <0 0xec720000 0 0x10000>;
-		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
-				 0 333 IRQ_TYPE_LEVEL_HIGH
-				 0 334 IRQ_TYPE_LEVEL_HIGH
-				 0 335 IRQ_TYPE_LEVEL_HIGH
-				 0 336 IRQ_TYPE_LEVEL_HIGH
-				 0 337 IRQ_TYPE_LEVEL_HIGH
-				 0 338 IRQ_TYPE_LEVEL_HIGH
-				 0 339 IRQ_TYPE_LEVEL_HIGH
-				 0 340 IRQ_TYPE_LEVEL_HIGH
-				 0 341 IRQ_TYPE_LEVEL_HIGH
-				 0 342 IRQ_TYPE_LEVEL_HIGH
-				 0 343 IRQ_TYPE_LEVEL_HIGH
-				 0 344 IRQ_TYPE_LEVEL_HIGH
-				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts =	<GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+				 GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -375,10 +405,10 @@
 	};
 
 	usb_dmac0: dma-controller@e65a0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65a0000 0 0x100>;
-		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
-			      0 109 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
 		power-domains = <&cpg_clocks>;
@@ -387,10 +417,10 @@
 	};
 
 	usb_dmac1: dma-controller@e65b0000 {
-		compatible = "renesas,usb-dmac";
+		compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
 		reg = <0 0xe65b0000 0 0x100>;
-		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
-			      0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "ch0", "ch1";
 		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
 		power-domains = <&cpg_clocks>;
@@ -404,9 +434,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6508000 0 0x40>;
-		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -415,9 +446,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6518000 0 0x40>;
-		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -426,9 +458,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6530000 0 0x40>;
-		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -437,9 +470,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6540000 0 0x40>;
-		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -448,9 +482,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6520000 0 0x40>;
-		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
 		status = "disabled";
 	};
 
@@ -460,9 +495,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,i2c-r8a7791";
 		reg = <0 0xe6528000 0 0x40>;
-		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
 		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <110>;
 		status = "disabled";
 	};
 
@@ -472,7 +508,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x425>;
-		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
 		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
 		dma-names = "tx", "rx";
@@ -485,7 +521,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x425>;
-		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
 		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
 		dma-names = "tx", "rx";
@@ -498,7 +534,7 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x425>;
-		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
 		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
 		dma-names = "tx", "rx";
@@ -509,13 +545,12 @@
 	pfc: pfc@e6060000 {
 		compatible = "renesas,pfc-r8a7791";
 		reg = <0 0xe6060000 0 0x250>;
-		#gpio-range-cells = <3>;
 	};
 
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
 		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
 		dma-names = "tx", "rx";
@@ -528,7 +563,7 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7791";
 		reg = <0 0xee100000 0 0x328>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
 		dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
 		dma-names = "tx", "rx";
@@ -539,7 +574,7 @@
 	sdhi1: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a7791";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
 		dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
 		dma-names = "tx", "rx";
@@ -550,7 +585,7 @@
 	sdhi2: sd@ee160000 {
 		compatible = "renesas,sdhi-r8a7791";
 		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
 		dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
 		dma-names = "tx", "rx";
@@ -559,11 +594,12 @@
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -571,11 +607,12 @@
 	};
 
 	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -583,11 +620,12 @@
 	};
 
 	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -595,11 +633,12 @@
 	};
 
 	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c70000 0 64>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -607,11 +646,12 @@
 	};
 
 	scifa4: serial@e6c78000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c78000 0 64>;
-		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -619,11 +659,12 @@
 	};
 
 	scifa5: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7791",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c80000 0 64>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -631,11 +672,12 @@
 	};
 
 	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7791",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -643,11 +685,12 @@
 	};
 
 	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7791",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -655,11 +698,12 @@
 	};
 
 	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7791",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -667,11 +711,13 @@
 	};
 
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -679,11 +725,13 @@
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -691,11 +739,13 @@
 	};
 
 	scif2: serial@e6e58000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e58000 0 64>;
-		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -703,11 +753,13 @@
 	};
 
 	scif3: serial@e6ea8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ea8000 0 64>;
-		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -715,11 +767,13 @@
 	};
 
 	scif4: serial@e6ee0000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee0000 0 64>;
-		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -727,11 +781,13 @@
 	};
 
 	scif5: serial@e6ee8000 {
-		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee8000 0 64>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -739,11 +795,13 @@
 	};
 
 	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7791",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -751,11 +809,13 @@
 	};
 
 	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7791",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -763,11 +823,13 @@
 	};
 
 	hscif2: serial@e62d0000 {
-		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7791",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62d0000 0 96>;
-		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -777,7 +839,7 @@
 	ether: ethernet@ee700000 {
 		compatible = "renesas,ether-r8a7791";
 		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
 		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
@@ -786,10 +848,22 @@
 		status = "disabled";
 	};
 
+	avb: ethernet@e6800000 {
+		compatible = "renesas,etheravb-r8a7791",
+			     "renesas,etheravb-rcar-gen2";
+		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sata0: sata@ee300000 {
 		compatible = "renesas,sata-r8a7791";
 		reg = <0 0xee300000 0 0x2000>;
-		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -798,16 +872,16 @@
 	sata1: sata@ee500000 {
 		compatible = "renesas,sata-r8a7791";
 		reg = <0 0xee500000 0 0x2000>;
-		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	hsusb: usb@e6590000 {
-		compatible = "renesas,usbhs-r8a7791";
+		compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs";
 		reg = <0 0xe6590000 0 0x100>;
-		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
 		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
 		       <&usb_dmac1 0>, <&usb_dmac1 1>;
@@ -842,7 +916,7 @@
 	vin0: video@e6ef0000 {
 		compatible = "renesas,vin-r8a7791";
 		reg = <0 0xe6ef0000 0 0x1000>;
-		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -851,7 +925,7 @@
 	vin1: video@e6ef1000 {
 		compatible = "renesas,vin-r8a7791";
 		reg = <0 0xe6ef1000 0 0x1000>;
-		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -860,7 +934,7 @@
 	vin2: video@e6ef2000 {
 		compatible = "renesas,vin-r8a7791";
 		reg = <0 0xe6ef2000 0 0x1000>;
-		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -869,7 +943,7 @@
 	vsp1@fe928000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe928000 0 0x8000>;
-		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
 		power-domains = <&cpg_clocks>;
 
@@ -883,7 +957,7 @@
 	vsp1@fe930000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe930000 0 0x8000>;
-		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
 		power-domains = <&cpg_clocks>;
 
@@ -897,7 +971,7 @@
 	vsp1@fe938000 {
 		compatible = "renesas,vsp1";
 		reg = <0 0xfe938000 0 0x8000>;
-		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
 		power-domains = <&cpg_clocks>;
 
@@ -913,8 +987,8 @@
 		reg = <0 0xfeb00000 0 0x40000>,
 		      <0 0xfeb90000 0 0x1c>;
 		reg-names = "du", "lvds.0";
-		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_DU0>,
 			 <&mstp7_clks R8A7791_CLK_DU1>,
 			 <&mstp7_clks R8A7791_CLK_LVDS0>;
@@ -941,7 +1015,7 @@
 	can0: can@e6e80000 {
 		compatible = "renesas,can-r8a7791";
 		reg = <0 0xe6e80000 0 0x1000>;
-		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
 			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
@@ -952,7 +1026,7 @@
 	can1: can@e6e88000 {
 		compatible = "renesas,can-r8a7791";
 		reg = <0 0xe6e88000 0 0x1000>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
 			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
 		clock-names = "clkp1", "clkp2", "can_clk";
@@ -963,7 +1037,7 @@
 	jpu: jpeg-codec@fe980000 {
 		compatible = "renesas,jpu-r8a7791";
 		reg = <0 0xfe980000 0 0x10300>;
-		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7791_CLK_JPU>;
 		power-domains = <&cpg_clocks>;
 	};
@@ -1014,6 +1088,15 @@
 			status = "disabled";
 		};
 
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
 		/* External USB clock - can be overridden by the board */
 		usb_extal_clk: usb_extal_clk {
 			compatible = "fixed-clock";
@@ -1163,14 +1246,6 @@
 			clock-mult = <1>;
 			clock-output-names = "m2";
 		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
 		rclk_clk: rclk_clk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
@@ -1338,16 +1413,18 @@
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
 			clocks = <&zx_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
-			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+			         <&zg_clk>, <&hp_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB
 				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
-				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
+				R8A7791_CLK_ETHERAVB R8A7791_CLK_ETHER
+				R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
 			>;
 			clock-output-names =
-				"ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether",
-				"sata1", "sata0";
+				"ipmmu_sgx", "mlb", "vin2", "vin1", "vin0",
+				"etheravb", "ether", "sata1", "sata0";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -1421,7 +1498,7 @@
 	qspi: spi@e6b10000 {
 		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
 		reg = <0 0xe6b10000 0 0x2c>;
-		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
 		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
 		dma-names = "tx", "rx";
@@ -1435,7 +1512,7 @@
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7791";
 		reg = <0 0xe6e20000 0 0x0064>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
 		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
 		dma-names = "tx", "rx";
@@ -1448,7 +1525,7 @@
 	msiof1: spi@e6e10000 {
 		compatible = "renesas,msiof-r8a7791";
 		reg = <0 0xe6e10000 0 0x0064>;
-		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
 		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
 		dma-names = "tx", "rx";
@@ -1461,7 +1538,7 @@
 	msiof2: spi@e6e00000 {
 		compatible = "renesas,msiof-r8a7791";
 		reg = <0 0xe6e00000 0 0x0064>;
-		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
 		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
 		dma-names = "tx", "rx";
@@ -1474,7 +1551,7 @@
 	xhci: usb@ee000000 {
 		compatible = "renesas,xhci-r8a7791";
 		reg = <0 0xee000000 0 0xc00>;
-		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
 		power-domains = <&cpg_clocks>;
 		phys = <&usb2 1>;
@@ -1483,11 +1560,11 @@
 	};
 
 	pci0: pci@ee090000 {
-		compatible = "renesas,pci-r8a7791";
+		compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2";
 		device_type = "pci";
 		reg = <0 0xee090000 0 0xc00>,
 		      <0 0xee080000 0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -1498,9 +1575,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1518,11 +1595,11 @@
 	};
 
 	pci1: pci@ee0d0000 {
-		compatible = "renesas,pci-r8a7791";
+		compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2";
 		device_type = "pci";
 		reg = <0 0xee0d0000 0 0xc00>,
 		      <0 0xee0c0000 0 0x1100>;
-		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -1533,9 +1610,9 @@
 		#interrupt-cells = <1>;
 		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
 		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 
 		usb@0,1 {
 			reg = <0x800 0 0 0 0>;
@@ -1553,7 +1630,7 @@
 	};
 
 	pciec: pcie@fe000000 {
-		compatible = "renesas,pcie-r8a7791";
+		compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
 		reg = <0 0xfe000000 0 0x80000>;
 		#address-cells = <3>;
 		#size-cells = <2>;
@@ -1566,12 +1643,12 @@
 		/* Map all possible DDR as inbound ranges */
 		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
 			      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
-		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
 		clock-names = "pcie", "pcie_bus";
 		power-domains = <&cpg_clocks>;
@@ -1579,61 +1656,61 @@
 	};
 
 	ipmmu_sy0: mmu@e6280000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6280000 0 0x1000>;
-		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_sy1: mmu@e6290000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6290000 0 0x1000>;
-		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_ds: mmu@e6740000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6740000 0 0x1000>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mp: mmu@ec680000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xec680000 0 0x1000>;
-		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mx: mmu@fe951000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xfe951000 0 0x1000>;
-		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_rt: mmu@ffc80000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xffc80000 0 0x1000>;
-		interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_gp: mmu@e62a0000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
 		reg = <0 0xe62a0000 0 0x1000>;
-		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
@@ -1649,7 +1726,7 @@
 		reg =	<0 0xec500000 0 0x1000>, /* SCU */
 			<0 0xec5a0000 0 0x100>,  /* ADG */
 			<0 0xec540000 0 0x1000>, /* SSIU */
-			<0 0xec541000 0 0x1280>, /* SSI */
+			<0 0xec541000 0 0x280>,  /* SSI */
 			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
 		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
@@ -1710,52 +1787,52 @@
 
 		rcar_sound,src {
 			src0: src@0 {
-				interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x85>, <&audma1 0x9a>;
 				dma-names = "rx", "tx";
 			};
 			src1: src@1 {
-				interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x87>, <&audma1 0x9c>;
 				dma-names = "rx", "tx";
 			};
 			src2: src@2 {
-				interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x89>, <&audma1 0x9e>;
 				dma-names = "rx", "tx";
 			};
 			src3: src@3 {
-				interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
 				dma-names = "rx", "tx";
 			};
 			src4: src@4 {
-				interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
 				dma-names = "rx", "tx";
 			};
 			src5: src@5 {
-				interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
 				dma-names = "rx", "tx";
 			};
 			src6: src@6 {
-				interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x91>, <&audma1 0xb4>;
 				dma-names = "rx", "tx";
 			};
 			src7: src@7 {
-				interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x93>, <&audma1 0xb6>;
 				dma-names = "rx", "tx";
 			};
 			src8: src@8 {
-				interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x95>, <&audma1 0xb8>;
 				dma-names = "rx", "tx";
 			};
 			src9: src@9 {
-				interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x97>, <&audma1 0xba>;
 				dma-names = "rx", "tx";
 			};
@@ -1763,52 +1840,52 @@
 
 		rcar_sound,ssi {
 			ssi0: ssi@0 {
-				interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi1: ssi@1 {
-				 interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi2: ssi@2 {
-				interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi3: ssi@3 {
-				interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi4: ssi@4 {
-				interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi5: ssi@5 {
-				interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi6: ssi@6 {
-				interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi7: ssi@7 {
-				interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi8: ssi@8 {
-				interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
 			ssi9: ssi@9 {
-				interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
 				dma-names = "rx", "tx", "rxu", "txu";
 			};
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 96443ec5f6ab..87e89ec9dd47 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -8,6 +8,34 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
 /dts-v1/;
 #include "r8a7793.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -24,20 +52,248 @@
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
 		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+		        gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_1>;
+		        label = "SW2-1";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-2 {
+		        gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_2>;
+		        label = "SW2-2";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-3 {
+		        gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_3>;
+		        label = "SW2-3";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-4 {
+		        gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_4>;
+		        label = "SW2-4";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-a {
+		        gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_A>;
+		        label = "SW30";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-b {
+		        gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_B>;
+		        label = "SW31";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-c {
+		        gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_C>;
+		        label = "SW32";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-d {
+		        gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_D>;
+		        label = "SW33";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-e {
+		        gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_E>;
+		        label = "SW34";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-f {
+		        gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_F>;
+		        label = "SW35";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+		key-g {
+		        gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		        linux,code = <KEY_G>;
+		        label = "SW36";
+		        wakeup-source;
+		        debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	audio_clock: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+		clock-output-names = "audio_clock";
+	};
+
+	rsnd_ak4643: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&audio_clock>;
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+		 <&mstp7_clks R8A7793_CLK_DU1>,
+		 <&mstp7_clks R8A7793_CLK_LVDS0>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
 };
 
 &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	scif1_pins: serial1 {
+		renesas,groups = "scif1_data_d";
+		renesas,function = "scif1";
+	};
+
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
+};
+
 &ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
 	status = "okay";
@@ -55,9 +311,132 @@
 };
 
 &scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
 
 &scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	ak4643: codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "renesas,r1ex24002", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
 };
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c4654047e684..b48215945241 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -18,6 +18,19 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -38,9 +51,35 @@
 					   < 937500 1000000>,
 					   < 750000 1000000>,
 					   < 375000 1000000>;
+			next-level-cache = <&L2_CA15>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive	= <0>;
+			polling-delay		= <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature	= <115000>;
+					hysteresis	= <0>;
+					type		= "critical";
+				};
+			};
+			cooling-maps {
+			};
 		};
 	};
 
+	L2_CA15: cache-controller@0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -50,22 +89,137 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO0>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO1>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO2>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO3>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO4>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO5>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio6: gpio@e6055400 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO6>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio7: gpio@e6055800 {
+		compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
+		reg = <0 0xe6055800 0 0x50>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 224 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7793_CLK_GPIO7>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	thermal: thermal@e61f0000 {
+		compatible =	"renesas,thermal-r8a7793",
+				"renesas,rcar-gen2-thermal",
+				"renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
+		power-domains = <&cpg_clocks>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -78,14 +232,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -100,36 +254,498 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
 		power-domains = <&cpg_clocks>;
 	};
 
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	audma0: dma-controller@ec700000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audma1: dma-controller@ec720000 {
+		compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+		reg = <0 0xec720000 0 0x10000>;
+		interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>;
+		clock-names = "fck";
+		power-domains = <&cpg_clocks>;
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	/* The memory map in the User's Manual maps the cores to bus numbers */
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6520000 0 0x40>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e6528000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7793";
+		reg = <0 0xe6528000 0 0x40>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+		power-domains = <&cpg_clocks>;
+		i2c-scl-internal-delay-ns = <110>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e60b0000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6060000 {
+		compatible = "renesas,pfc-r8a7793";
+		reg = <0 0xe6060000 0 0x250>;
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c70000 0 64>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c78000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c78000 0 64>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifa5: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7793",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
+		reg = <0 0xe6c80000 0 64>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7793",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7793",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7793",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
+		clock-names = "fck";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7793", "renesas,scif";
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7793", "renesas,scif";
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif2: serial@e6e58000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6e58000 0 64>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif3: serial@e6ea8000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6ea8000 0 64>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif4: serial@e6ee0000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6ee0000 0 64>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	scif5: serial@e6ee8000 {
+		compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
+		reg = <0 0xe6ee8000 0 64>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7793",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7793",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	hscif2: serial@e62d0000 {
+		compatible = "renesas,hscif-r8a7793",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
+		reg = <0 0xe62d0000 0 96>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -137,7 +753,7 @@
 	ether: ethernet@ee700000 {
 		compatible = "renesas,ether-r8a7793";
 		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
 		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
@@ -146,6 +762,50 @@
 		status = "disabled";
 	};
 
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7793", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7793";
+		reg = <0 0xfeb00000 0 0x40000>,
+		      <0 0xfeb90000 0 0x1c>;
+		reg-names = "du", "lvds.0";
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+			 <&mstp7_clks R8A7793_CLK_DU1>,
+			 <&mstp7_clks R8A7793_CLK_LVDS0>;
+		clock-names = "du.0", "du.1", "lvds.0";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -160,6 +820,38 @@
 			clock-output-names = "extal";
 		};
 
+		/*
+		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+		 * default. Boards that provide audio clocks should override them.
+		 */
+		audio_clk_a: audio_clk_a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_a";
+		};
+		audio_clk_b: audio_clk_b {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_b";
+		};
+		audio_clk_c: audio_clk_c {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_c";
+		};
+
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7793-cpg-clocks",
@@ -248,6 +940,14 @@
 			clock-mult = <1>;
 			clock-output-names = "p";
 		};
+		m2_clk: m2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "m2";
+		};
 		rclk_clk: rclk_clk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
@@ -299,6 +999,21 @@
 				"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
 				"vsp1-du0", "vsps";
 		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_SCIFA2 R8A7793_CLK_SCIFA1 R8A7793_CLK_SCIFA0
+				R8A7793_CLK_SCIFB0 R8A7793_CLK_SCIFB1 R8A7793_CLK_SCIFB2
+				R8A7793_CLK_SYS_DMAC1 R8A7793_CLK_SYS_DMAC0
+			>;
+			clock-output-names =
+				"scifa2", "scifa1", "scifa0", "scifb0",
+				"scifb1", "scifb2", "sys-dmac1", "sys-dmac0";
+		};
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7793-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
@@ -329,6 +1044,15 @@
 			clock-indices = <R8A7793_CLK_IRQC>;
 			clock-output-names = "irqc";
 		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1
+					 R8A7793_CLK_THERMAL>;
+			clock-output-names = "audmac0", "audmac1", "thermal";
+		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7793-mstp-clocks",
 				     "renesas,cpg-mstp-clocks";
@@ -369,6 +1093,293 @@
 				"ipmmu_sgx", "vin2", "vin1", "vin0", "ether",
 				"sata1", "sata0";
 		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
+				 <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
+				R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
+				R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
+				R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
+				R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+				R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
+				R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
+				R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
+			>;
+			clock-output-names =
+				"gpio7", "gpio6", "gpio5", "gpio4",
+				"gpio3", "gpio2", "gpio1", "gpio0",
+				"qspi_mod", "i2c5", "i2c6", "i2c4",
+				"i2c3", "i2c2", "i2c1", "i2c0";
+		};
+		mstp10_clks: mstp10_clks@e6150998 {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+			clocks = <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>;
+
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_SSI_ALL
+				R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5
+				R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0
+				R8A7793_CLK_SCU_ALL
+				R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0
+				R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0
+				R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5
+				R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0
+			>;
+			clock-output-names =
+				"ssi-all",
+				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+				"scu-all",
+				"scu-dvc1", "scu-dvc0",
+				"scu-ctu1-mix1", "scu-ctu0-mix0",
+				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+		};
+		mstp11_clks: mstp11_clks@e615099c {
+			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7793_CLK_SCIFA3 R8A7793_CLK_SCIFA4 R8A7793_CLK_SCIFA5
+			>;
+			clock-output-names = "scifa3", "scifa4", "scifa5";
+		};
+	};
+
+	ipmmu_sy0: mmu@e6280000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe6280000 0 0x1000>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_sy1: mmu@e6290000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe6290000 0 0x1000>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_ds: mmu@e6740000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe6740000 0 0x1000>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mp: mmu@ec680000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xec680000 0 0x1000>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_mx: mmu@fe951000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
+	ipmmu_rt: mmu@ffc80000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xffc80000 0 0x1000>;
+		interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	ipmmu_gp: mmu@e62a0000 {
+		compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
+		reg = <0 0xe62a0000 0 0x1000>;
+		interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		status = "disabled";
+	};
+
+	rcar_sound: sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible =  "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x280>,  /* SSI */
+			<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+		reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+		clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+			<&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
+			<&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>,
+			<&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>,
+			<&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>,
+			<&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>,
+			<&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>,
+			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+		clock-names = "ssi-all",
+				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+				"src.9", "src.8", "src.7", "src.6", "src.5",
+				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"dvc.0", "dvc.1",
+				"clk_a", "clk_b", "clk_c", "clk_i";
+		power-domains = <&cpg_clocks>;
+
+		status = "disabled";
+
+		rcar_sound,dvc {
+			dvc0: dvc@0 {
+				dmas = <&audma0 0xbc>;
+				dma-names = "tx";
+			};
+			dvc1: dvc@1 {
+				dmas = <&audma0 0xbe>;
+				dma-names = "tx";
+			};
+		};
+
+		rcar_sound,src {
+			src0: src@0 {
+				interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x85>, <&audma1 0x9a>;
+				dma-names = "rx", "tx";
+			};
+			src1: src@1 {
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x87>, <&audma1 0x9c>;
+				dma-names = "rx", "tx";
+			};
+			src2: src@2 {
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x89>, <&audma1 0x9e>;
+				dma-names = "rx", "tx";
+			};
+			src3: src@3 {
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+				dma-names = "rx", "tx";
+			};
+			src4: src@4 {
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+				dma-names = "rx", "tx";
+			};
+			src5: src@5 {
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+				dma-names = "rx", "tx";
+			};
+			src6: src@6 {
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x91>, <&audma1 0xb4>;
+				dma-names = "rx", "tx";
+			};
+			src7: src@7 {
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x93>, <&audma1 0xb6>;
+				dma-names = "rx", "tx";
+			};
+			src8: src@8 {
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x95>, <&audma1 0xb8>;
+				dma-names = "rx", "tx";
+			};
+			src9: src@9 {
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x97>, <&audma1 0xba>;
+				dma-names = "rx", "tx";
+			};
+		};
+
+		rcar_sound,ssi {
+			ssi0: ssi@0 {
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi1: ssi@1 {
+				 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi2: ssi@2 {
+				interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi3: ssi@3 {
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi4: ssi@4 {
+				interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi5: ssi@5 {
+				interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi6: ssi@6 {
+				interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi7: ssi@7 {
+				interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi8: ssi@8 {
+				interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+			ssi9: ssi@9 {
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+				dma-names = "rx", "tx", "rxu", "txu";
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 928cfa641475..ca9bc4fff287 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -21,7 +21,7 @@
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -33,17 +33,130 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	x13_clk: x13-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x13_clk>, <&x2_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
 };
 
 &extal_clk {
 	clock-frequency = <20000000>;
 };
 
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	du_pins: du {
+		renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
+		renesas,function = "du";
+	};
+
+	scif2_pins: serial2 {
+		renesas,groups = "scif2_data";
+		renesas,function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq8";
+		renesas,function = "intc";
+	};
+
+	i2c1_pins: i2c1 {
+		renesas,groups = "i2c1";
+		renesas,function = "i2c1";
+	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
+};
+
 &cmt0 {
 	status = "okay";
 };
 
+&pfc {
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+};
+
 &ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
 	phy-handle = <&phy1>;
 	renesas,ether-link-active-low;
 	status = "okay";
@@ -56,6 +169,90 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+};
+
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
 &scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
 	status = "okay";
 };
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "system";
+				reg = <0x00040000 0x00040000>;
+				read-only;
+			};
+			partition@80000 {
+				label = "user";
+				reg = <0x00080000 0x03f80000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index d4dd5a30ccdf..66f077a3ca41 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -12,6 +12,7 @@
 
 /dts-v1/;
 #include "r8a7794.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "SILK";
@@ -23,7 +24,7 @@
 
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
-		stdout-path = &scif2;
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@40000000 {
@@ -39,6 +40,85 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	vcc_sdhi1: regulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator@4 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+
+	x2_clk: x2-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -46,11 +126,19 @@
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	scif2_pins: serial2 {
 		renesas,groups = "scif2_data";
 		renesas,function = "scif2";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -61,10 +149,40 @@
 		renesas,function = "intc";
 	};
 
+	i2c1_pins: i2c1 {
+		renesas,groups = "i2c1";
+		renesas,function = "i2c1";
+	};
+
 	mmcif0_pins: mmcif0 {
 		renesas,groups = "mmc_data8", "mmc_ctrl";
 		renesas,function = "mmc";
 	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
 };
 
 &scif2 {
@@ -74,6 +192,11 @@
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";
@@ -90,6 +213,59 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
+};
+
 &mmcif0 {
 	pinctrl-0 = <&mmcif0_pins>;
 	pinctrl-names = "default";
@@ -100,3 +276,107 @@
 	non-removable;
 	status = "okay";
 };
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "loader";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x00400000>;
+				read-only;
+			};
+			partition@440000 {
+				label = "flash";
+				reg = <0x00440000 0x03bc0000>;
+			};
+		};
+	};
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&du {
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&x2_clk>, <&x3_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 97c8e9ace5eb..eacb2b291361 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -19,6 +19,18 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		spi0 = &qspi;
+		vin0 = &vin0;
+		vin1 = &vin1;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -28,6 +40,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0>;
 			clock-frequency = <1000000000>;
+			next-level-cache = <&L2_CA7>;
 		};
 
 		cpu1: cpu@1 {
@@ -35,9 +48,16 @@
 			compatible = "arm,cortex-a7";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			next-level-cache = <&L2_CA7>;
 		};
 	};
 
+	L2_CA7: cache-controller@1 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	gic: interrupt-controller@f1001000 {
 		compatible = "arm,gic-400";
 		#interrupt-cells = <3>;
@@ -47,14 +67,105 @@
 			<0 0xf1002000 0 0x1000>,
 			<0 0xf1004000 0 0x2000>,
 			<0 0xf1006000 0 0x2000>;
-		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 28>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
+		power-domains = <&cpg_clocks>;
+	};
+
+	gpio6: gpio@e6055400 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
+		power-domains = <&cpg_clocks>;
 	};
 
 	cmt0: timer@ffca0000 {
 		compatible = "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
-		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -67,14 +178,14 @@
 	cmt1: timer@e6130000 {
 		compatible = "renesas,cmt-48-gen2";
 		reg = <0 0xe6130000 0 0x1004>;
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&cpg_clocks>;
@@ -86,10 +197,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	irqc0: interrupt-controller@e61c0000 {
@@ -97,16 +208,16 @@
 		#interrupt-cells = <2>;
 		interrupt-controller;
 		reg = <0 0xe61c0000 0 0x200>;
-		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
 		power-domains = <&cpg_clocks>;
 	};
@@ -114,28 +225,27 @@
 	pfc: pin-controller@e6060000 {
 		compatible = "renesas,pfc-r8a7794";
 		reg = <0 0xe6060000 0 0x11c>;
-		#gpio-range-cells = <3>;
 	};
 
 	dmac0: dma-controller@e6700000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
 		reg = <0 0xe6700000 0 0x20000>;
-		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
-			      0 200 IRQ_TYPE_LEVEL_HIGH
-			      0 201 IRQ_TYPE_LEVEL_HIGH
-			      0 202 IRQ_TYPE_LEVEL_HIGH
-			      0 203 IRQ_TYPE_LEVEL_HIGH
-			      0 204 IRQ_TYPE_LEVEL_HIGH
-			      0 205 IRQ_TYPE_LEVEL_HIGH
-			      0 206 IRQ_TYPE_LEVEL_HIGH
-			      0 207 IRQ_TYPE_LEVEL_HIGH
-			      0 208 IRQ_TYPE_LEVEL_HIGH
-			      0 209 IRQ_TYPE_LEVEL_HIGH
-			      0 210 IRQ_TYPE_LEVEL_HIGH
-			      0 211 IRQ_TYPE_LEVEL_HIGH
-			      0 212 IRQ_TYPE_LEVEL_HIGH
-			      0 213 IRQ_TYPE_LEVEL_HIGH
-			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -149,24 +259,24 @@
 	};
 
 	dmac1: dma-controller@e6720000 {
-		compatible = "renesas,rcar-dmac";
+		compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
 		reg = <0 0xe6720000 0 0x20000>;
-		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
-			      0 216 IRQ_TYPE_LEVEL_HIGH
-			      0 217 IRQ_TYPE_LEVEL_HIGH
-			      0 218 IRQ_TYPE_LEVEL_HIGH
-			      0 219 IRQ_TYPE_LEVEL_HIGH
-			      0 308 IRQ_TYPE_LEVEL_HIGH
-			      0 309 IRQ_TYPE_LEVEL_HIGH
-			      0 310 IRQ_TYPE_LEVEL_HIGH
-			      0 311 IRQ_TYPE_LEVEL_HIGH
-			      0 312 IRQ_TYPE_LEVEL_HIGH
-			      0 313 IRQ_TYPE_LEVEL_HIGH
-			      0 314 IRQ_TYPE_LEVEL_HIGH
-			      0 315 IRQ_TYPE_LEVEL_HIGH
-			      0 316 IRQ_TYPE_LEVEL_HIGH
-			      0 317 IRQ_TYPE_LEVEL_HIGH
-			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "error",
 				"ch0", "ch1", "ch2", "ch3",
 				"ch4", "ch5", "ch6", "ch7",
@@ -180,11 +290,12 @@
 	};
 
 	scifa0: serial@e6c40000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c40000 0 64>;
-		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -192,11 +303,12 @@
 	};
 
 	scifa1: serial@e6c50000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c50000 0 64>;
-		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -204,11 +316,12 @@
 	};
 
 	scifa2: serial@e6c60000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c60000 0 64>;
-		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -216,11 +329,12 @@
 	};
 
 	scifa3: serial@e6c70000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c70000 0 64>;
-		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -228,11 +342,12 @@
 	};
 
 	scifa4: serial@e6c78000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c78000 0 64>;
-		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -240,11 +355,12 @@
 	};
 
 	scifa5: serial@e6c80000 {
-		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		compatible = "renesas,scifa-r8a7794",
+			     "renesas,rcar-gen2-scifa", "renesas,scifa";
 		reg = <0 0xe6c80000 0 64>;
-		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -252,11 +368,12 @@
 	};
 
 	scifb0: serial@e6c20000 {
-		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7794",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c20000 0 64>;
-		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -264,11 +381,12 @@
 	};
 
 	scifb1: serial@e6c30000 {
-		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7794",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6c30000 0 64>;
-		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -276,11 +394,12 @@
 	};
 
 	scifb2: serial@e6ce0000 {
-		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		compatible = "renesas,scifb-r8a7794",
+			     "renesas,rcar-gen2-scifb", "renesas,scifb";
 		reg = <0 0xe6ce0000 0 64>;
-		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -288,11 +407,13 @@
 	};
 
 	scif0: serial@e6e60000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e60000 0 64>;
-		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -300,11 +421,13 @@
 	};
 
 	scif1: serial@e6e68000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e68000 0 64>;
-		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -312,11 +435,13 @@
 	};
 
 	scif2: serial@e6e58000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6e58000 0 64>;
-		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -324,11 +449,13 @@
 	};
 
 	scif3: serial@e6ea8000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ea8000 0 64>;
-		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -336,11 +463,13 @@
 	};
 
 	scif4: serial@e6ee0000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee0000 0 64>;
-		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -348,11 +477,13 @@
 	};
 
 	scif5: serial@e6ee8000 {
-		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+			     "renesas,scif";
 		reg = <0 0xe6ee8000 0 64>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -360,11 +491,13 @@
 	};
 
 	hscif0: serial@e62c0000 {
-		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7794",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c0000 0 96>;
-		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -372,11 +505,13 @@
 	};
 
 	hscif1: serial@e62c8000 {
-		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7794",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62c8000 0 96>;
-		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -384,11 +519,13 @@
 	};
 
 	hscif2: serial@e62d0000 {
-		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		compatible = "renesas,hscif-r8a7794",
+			     "renesas,rcar-gen2-hscif", "renesas,hscif";
 		reg = <0 0xe62d0000 0 96>;
-		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
-		clock-names = "sci_ick";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
+			 <&scif_clk>;
+		clock-names = "fck", "brg_int", "scif_clk";
 		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
 		dma-names = "tx", "rx";
 		power-domains = <&cpg_clocks>;
@@ -398,7 +535,7 @@
 	ether: ethernet@ee700000 {
 		compatible = "renesas,ether-r8a7794";
 		reg = <0 0xee700000 0 0x400>;
-		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
 		power-domains = <&cpg_clocks>;
 		phy-mode = "rmii";
@@ -407,10 +544,95 @@
 		status = "disabled";
 	};
 
+	avb: ethernet@e6800000 {
+		compatible = "renesas,etheravb-r8a7794",
+			     "renesas,etheravb-rcar-gen2";
+		reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	/* The memory map in the User's Manual maps the cores to bus numbers */
+	i2c0: i2c@e6508000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6520000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6520000 0 0x40>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e6528000 {
+		compatible = "renesas,i2c-r8a7794";
+		reg = <0 0xe6528000 0 0x40>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+		power-domains = <&cpg_clocks>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-scl-internal-delay-ns = <6>;
+		status = "disabled";
+	};
+
 	mmcif0: mmc@ee200000 {
 		compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
 		reg = <0 0xee200000 0 0x80>;
-		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
 		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
 		dma-names = "tx", "rx";
@@ -422,7 +644,7 @@
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-r8a7794";
 		reg = <0 0xee100000 0 0x200>;
-		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -431,7 +653,7 @@
 	sdhi1: sd@ee140000 {
 		compatible = "renesas,sdhi-r8a7794";
 		reg = <0 0xee140000 0 0x100>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
@@ -440,12 +662,174 @@
 	sdhi2: sd@ee160000 {
 		compatible = "renesas,sdhi-r8a7794";
 		reg = <0 0xee160000 0 0x100>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
 
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7794", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
+		power-domains = <&cpg_clocks>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7794";
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7794";
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
+
+	pci0: pci@ee090000 {
+		compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2";
+		device_type = "pci";
+		reg = <0 0xee090000 0 0xc00>,
+		      <0 0xee080000 0 0x1100>;
+		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+	};
+
+	pci1: pci@ee0d0000 {
+		compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2";
+		device_type = "pci";
+		reg = <0 0xee0d0000 0 0xc00>,
+		      <0 0xee0c0000 0 0x1100>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+
+		bus-range = <1 1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+	};
+
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		power-domains = <&cpg_clocks>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@e6590100 {
+		compatible = "renesas,usb-phy-r8a7794";
+		reg = <0 0xe6590100 0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+		clock-names = "usbhs";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+
+		usb0: usb-channel@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+		usb2: usb-channel@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7794";
+		reg = <0 0xfeb00000 0 0x40000>;
+		reg-names = "du";
+		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+			 <&mstp7_clks R8A7794_CLK_DU0>;
+		clock-names = "du.0", "du.1";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb0: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_rgb1: endpoint {
+				};
+			};
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -460,6 +844,15 @@
 			clock-output-names = "extal";
 		};
 
+		/* External SCIF clock */
+		scif_clk: scif {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overridden by the board. */
+			clock-frequency = <0>;
+			status = "disabled";
+		};
+
 		/* Special CPG clocks */
 		cpg_clocks: cpg_clocks@e6150000 {
 			compatible = "renesas,r8a7794-cpg-clocks",
@@ -575,14 +968,6 @@
 			clock-mult = <1>;
 			clock-output-names = "m2";
 		};
-		imp_clk: imp_clk {
-			compatible = "fixed-factor-clock";
-			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
-			#clock-cells = <0>;
-			clock-div = <4>;
-			clock-mult = <1>;
-			clock-output-names = "imp";
-		};
 		rclk_clk: rclk_clk {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
@@ -721,44 +1106,52 @@
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
 			clocks = <&mp_clk>, <&mp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
-				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				 <&zx_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
 				R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
 				R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
 				R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
-				R8A7794_CLK_SCIF0
+				R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
 			>;
 			clock-output-names =
 				"ehci", "hsusb",
 				"hscif2", "scif5", "scif4", "hscif1", "hscif0",
-				"scif3", "scif2", "scif1", "scif0";
+				"scif3", "scif2", "scif1", "scif0", "du0";
 		};
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
-			clocks = <&zg_clk>, <&zg_clk>, <&p_clk>;
+			clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
-				R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER
+				R8A7794_CLK_VIN1 R8A7794_CLK_VIN0
+				R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER
 			>;
 			clock-output-names =
-				"vin1", "vin0", "ether";
+				"vin1", "vin0", "etheravb", "ether";
 		};
 		mstp9_clks: mstp9_clks@e6150994 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
-			clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
-				<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-			clock-indices = <
-				R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
-				R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
-				R8A7794_CLK_I2C0
-			>;
+			clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+					 R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+					 R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+					 R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+					 R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+					 R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+					 R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
 			clock-output-names =
-				"qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+				"gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+				"gpio1", "gpio0", "qspi_mod",
+				"i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
 		};
 		mstp11_clks: mstp11_clks@e615099c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -773,51 +1166,53 @@
 	};
 
 	ipmmu_sy0: mmu@e6280000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6280000 0 0x1000>;
-		interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 224 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_sy1: mmu@e6290000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6290000 0 0x1000>;
-		interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_ds: mmu@e6740000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe6740000 0 0x1000>;
-		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 199 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
 	ipmmu_mp: mmu@ec680000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xec680000 0 0x1000>;
-		interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
 
 	ipmmu_mx: mmu@fe951000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xfe951000 0 0x1000>;
-		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
+		status = "disabled";
 	};
 
 	ipmmu_gp: mmu@e62a0000 {
-		compatible = "renesas,ipmmu-vmsa";
+		compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
 		reg = <0 0xe62a0000 0 0x1000>;
-		interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 261 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
 		#iommu-cells = <1>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
new file mode 100644
index 000000000000..a07ebf8f6938
--- /dev/null
+++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Common file for the AA121TD01 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	panel {
+		compatible = "mitsubishi,aa121td01", "panel-dpi";
+
+		width-mm = <261>;
+		height-mm = <163>;
+
+		panel-timing {
+			/* 1280x800 @60Hz */
+			clock-frequency = <71000000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hsync-len = <70>;
+			hfront-porch = <20>;
+			hback-porch = <70>;
+			vsync-len = <5>;
+			vfront-porch = <3>;
+			vback-porch = <15>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
new file mode 100644
index 000000000000..b3d6ec87f615
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -0,0 +1,78 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "Rockchip RK3036 Evaluation board";
+	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
new file mode 100644
index 000000000000..6251d109eff4
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -0,0 +1,418 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "Rockchip RK3036 KylinBoard";
+	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
+
+	leds: gpio-leds {
+		compatible = "gpio-leds";
+
+		work {
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			label = "kylin:red:led";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_ctl>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_wake_h>;
+
+		/*
+		 * On the module itself this is one of these (depending
+		 * on the actual card populated):
+		 * - SDIO_RESET_L_WL_REG_ON
+		 * - SDIO_RESET_L_WL_RST
+		 * - SDIO_RESET_L_BT_EN
+		 */
+		reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+			      <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */
+			      <&gpio2 9  GPIO_ACTIVE_LOW>; /* BT_EN */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "rockchip,rt5616-codec";
+		simple-audio-card,mclk-fs = <512>;
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC1", "Microphone Jack",
+			"MIC2", "Microphone Jack",
+			"Microphone Jack", "micbias1",
+			"Headphone Jack", "HPOL",
+			"Headphone Jack", "HPOR";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&rt5616>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&acodec {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&emmc {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vout5: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-name = "vout5";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	rt5616: rt5616@1b {
+		compatible = "rt5616";
+		reg = <0x1b>;
+		clocks = <&cru SCLK_I2S_OUT>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+
+	broken-cd;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	default-sample-phase = <90>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&pinctrl {
+	leds {
+		led_ctl: led-ctl {
+			rockchip,pins = <2 30 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdio {
+		bt_wake_h: bt-wake-h {
+			rockchip,pins = <2 8 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sleep {
+		global_pwroff: global-pwroff {
+			rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
new file mode 100644
index 000000000000..d0f4bb7e1e50
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -0,0 +1,702 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3036";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		mshc0 = &emmc;
+		mshc1 = &sdmmc;
+		mshc2 = &sdio;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		spi = &spi;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	bus_intmem@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x2000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		dr_mode = "host";
+		status = "disabled";
+	};
+
+	emac: ethernet@10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		/*
+		 * Fix the emac parent clock is DPLL instead of APLL.
+		 * since that will cause some unstable things if the cpufreq
+		 * is working. (e.g: the accurate 50MHz what mac_ref need)
+		 */
+		assigned-clocks = <&cru SCLK_MACPLL>;
+		assigned-clock-parents = <&cru PLL_DPLL>;
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
+	sdmmc: dwmmc@10214000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10214000 0x4000>;
+		clock-frequency = <37500000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@10218000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x10218000 0x4000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@1021c000 {
+		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x1021c000 0x4000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		broken-cd;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+		clock-frequency = <37500000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		default-sample-phase = <158>;
+		disable-wp;
+		dmas = <&pdma 12>;
+		dma-names = "rx-tx";
+		fifo-depth = <0x100>;
+		mmc-ddr-1_8v;
+		non-removable;
+		num-slots = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		status = "disabled";
+	};
+
+	i2s: i2s@10220000 {
+		compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s";
+		reg = <0x10220000 0x4000>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2s_clk", "i2s_hclk";
+		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
+		dmas = <&pdma 0>, <&pdma 1>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s_bus>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3036-grf", "syscon";
+		reg = <0x20008000 0x1000>;
+	};
+
+	acodec: acodec-ana@20030000 {
+		compatible = "rk3036-codec";
+		reg = <0x20030000 0x4000>;
+		rockchip,grf = <&grf>;
+		clock-names = "acodec_pclk";
+		clocks = <&cru PCLK_ACODEC>;
+		status = "disabled";
+	};
+
+	timer: timer@20044000 {
+		compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
+		reg = <0x20044000 0x20>;
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@2005a000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@20072000 {
+		compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c";
+		reg = <0x20072000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	spi: spi@20074000 {
+		compatible = "rockchip,rockchip-spi";
+		reg = <0x20074000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>;
+		clock-names = "apb-pclk","spi_pclk";
+		dmas = <&pdma 8>, <&pdma 9>;
+		dma-names = "tx", "rx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3036-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg_pull_default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 16 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdmmc_cd: sdmcc-cd {
+				rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 18 RK_FUNC_1 &pcfg_pull_default>,
+						<1 19 RK_FUNC_1 &pcfg_pull_default>,
+						<1 20 RK_FUNC_1 &pcfg_pull_default>,
+						<1 21 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		sdio {
+			sdio_bus1: sdio-bus1 {
+				rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <0 11 RK_FUNC_1 &pcfg_pull_default>,
+						<0 12 RK_FUNC_1 &pcfg_pull_default>,
+						<0 13 RK_FUNC_1 &pcfg_pull_default>,
+						<0 14 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sdio_clk: sdio-clk {
+				rockchip,pins = <0 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		emmc {
+			/*
+			 * We run eMMC at max speed; bump up drive strength.
+			 * We also have external pulls, so disable the internal ones.
+			 */
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <2 1 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_default>,
+						<1 25 RK_FUNC_2 &pcfg_pull_default>,
+						<1 26 RK_FUNC_2 &pcfg_pull_default>,
+						<1 27 RK_FUNC_2 &pcfg_pull_default>,
+						<1 28 RK_FUNC_2 &pcfg_pull_default>,
+						<1 29 RK_FUNC_2 &pcfg_pull_default>,
+						<1 30 RK_FUNC_2 &pcfg_pull_default>,
+						<1 31 RK_FUNC_2 &pcfg_pull_default>;
+			};
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
+						<2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
+						<2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
+						<2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
+						<2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
+						<2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
+						<2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
+						<2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
+						<2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+						<0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+						<2 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s {
+			i2s_bus: i2s-bus {
+				rockchip,pins = <1 0 RK_FUNC_1 &pcfg_pull_default>,
+						<1 1 RK_FUNC_1 &pcfg_pull_default>,
+						<1 2 RK_FUNC_1 &pcfg_pull_default>,
+						<1 3 RK_FUNC_1 &pcfg_pull_default>,
+						<1 4 RK_FUNC_1 &pcfg_pull_default>,
+						<1 5 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,
+						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_default>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart1 */
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_default>,
+						<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		spi {
+			spi_txd:spi-txd {
+				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
+			};
+
+			spi_rxd:spi-rxd {
+				rockchip,pins = <1 28 RK_FUNC_3 &pcfg_pull_default>;
+			};
+
+			spi_clk:spi-clk {
+				rockchip,pins = <2 0 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			spi_cs0:spi-cs0 {
+				rockchip,pins = <1 30 RK_FUNC_3 &pcfg_pull_default>;
+
+			};
+
+			spi_cs1:spi-cs1 {
+				rockchip,pins = <1 31 RK_FUNC_3 &pcfg_pull_default>;
+
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index c0273755431a..6d2a5b3a84a8 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -53,6 +53,18 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vcc_sd0: fixed-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
@@ -74,7 +86,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 		button@1 {
@@ -82,7 +94,6 @@
 			linux,code = <104>;
 			label = "GPIO Key Vol-";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <0>;
 			debounce-interval = <100>;
 		};
 		/* VOL+ comes somehow thru the ADC */
@@ -186,6 +197,8 @@
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd0>;
 	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
 	disable-wp;
 };
 
@@ -201,6 +214,10 @@
 	disable-wp;
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index bae965c123c1..a2b763e949b4 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -52,6 +52,18 @@
 		reg = <0x60000000 0x40000000>;
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vcc_sd0: sdmmc-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "sdmmc-supply";
@@ -178,6 +190,14 @@
 	};
 };
 
+&mmc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+};
+
 &pinctrl {
 	lan8720a {
 		phy_int: phy-int {
@@ -186,6 +206,10 @@
 	};
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index e36383c701dc..05533005a809 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -65,7 +65,7 @@
 		#size-cells = <0>;
 
 		button@0 {
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <116>;
@@ -74,6 +74,18 @@
 		};
 	};
 
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 1000>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		voltage-table = <1000000 100>,
+				<1200000 42>;
+		status = "okay";
+	};
+
 	vsys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vsys";
@@ -330,6 +342,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
 	status = "okay";
 };
 
@@ -429,6 +443,10 @@
 	status = "okay";
 };
 
+&pwm3 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_25>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 946f18705e96..cb0a552e0b18 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -61,11 +61,13 @@
 			reg = <0x0>;
 			operating-points = <
 				/* kHz    uV */
-				1008000 1075000
-				 816000 1025000
-				 600000 1025000
-				 504000 1000000
-				 312000  975000
+				1416000 1300000
+				1200000 1175000
+				1008000 1125000
+				816000  1125000
+				600000  1100000
+				504000  1100000
+				312000  1075000
 			>;
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
@@ -103,6 +105,8 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		rockchip,playback-channels = <8>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
@@ -118,6 +122,8 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
@@ -133,6 +139,8 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
@@ -153,6 +161,19 @@
 		clock-names = "timer", "pclk";
 	};
 
+	efuse: efuse@20010000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0x20010000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage {
+			reg = <0x17 0x1>;
+		};
+	};
+
 	timer@20038000 {
 		compatible = "snps,dw-apb-timer-osc";
 		reg = <0x20038000 0x100>;
@@ -169,6 +190,16 @@
 		clock-names = "timer", "pclk";
 	};
 
+	tsadc: tsadc@20060000 {
+		compatible = "rockchip,rk3066-tsadc";
+		reg = <0x20060000 0x100>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "saradc", "apb_pclk";
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		status = "disabled";
+	};
+
 	usbphy: phy {
 		compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
 		rockchip,grf = <&grf>;
@@ -181,6 +212,7 @@
 			reg = <0x17c>;
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy1: usb-phy1 {
@@ -188,6 +220,7 @@
 			reg = <0x188>;
 			clocks = <&cru SCLK_OTGPHY1>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5d2b05..0b6924c97b6b 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -63,7 +63,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
@@ -90,6 +90,21 @@
 		};
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
 	ir_recv: gpio-ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 10 1>;
@@ -289,6 +304,8 @@
 	vmmc-supply = <&vcc_sd0>;
 
 	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
 	disable-wp;
 };
 
@@ -343,6 +360,10 @@
 	};
 };
 
+&spdif {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 316304272118..9271833958f9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -118,6 +118,22 @@
 		dma-names = "tx", "rx";
 		clock-names = "i2s_hclk", "i2s_clk";
 		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		rockchip,playback-channels = <2>;
+		rockchip,capture-channels = <2>;
+		status = "disabled";
+	};
+
+	spdif: sound@1011e000 {
+		compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+		reg = <0x1011e000 0x2000>;
+		#sound-dai-cells = <0>;
+		clock-names = "hclk", "mclk";
+		clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+		dmas = <&dmac1_s 8>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
 		status = "disabled";
 	};
 
@@ -130,6 +146,19 @@
 		#reset-cells = <1>;
 	};
 
+	efuse: efuse@20010000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0x20010000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage {
+			reg = <0x17 0x1>;
+		};
+	};
+
 	usbphy: phy {
 		compatible = "rockchip,rk3188-usb-phy", "rockchip,rk3288-usb-phy";
 		rockchip,grf = <&grf>;
@@ -142,6 +171,7 @@
 			reg = <0x10c>;
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy1: usb-phy1 {
@@ -149,6 +179,7 @@
 			reg = <0x11c>;
 			clocks = <&cru SCLK_OTGPHY1>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 	};
 
@@ -484,6 +515,12 @@
 						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
new file mode 100644
index 000000000000..e3898b810150
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -0,0 +1,66 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3228.dtsi"
+
+/ {
+	model = "Rockchip RK3228 Evaluation board";
+	compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+};
+
+&emmc {
+	broken-cd;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi
new file mode 100644
index 000000000000..4dae42a01509
--- /dev/null
+++ b/arch/arm/boot/dts/rk3228.dtsi
@@ -0,0 +1,442 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3228";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+
+		cpu2: cpu@f02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			resets = <&cru SRST_CORE2>;
+		};
+
+		cpu3: cpu@f03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			resets = <&cru SRST_CORE3>;
+		};
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@110f0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x110f0000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	grf: syscon@11000000 {
+		compatible = "syscon";
+		reg = <0x11000000 0x1000>;
+	};
+
+	uart0: serial@11010000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11010000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart1: serial@11020000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11020000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@11030000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x11030000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@110b0000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0000 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@110b0010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0010 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@110b0020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0020 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@110b0030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0x110b0030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		status = "disabled";
+	};
+
+	timer: timer@110c0000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0x110c0000 0x20>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	cru: clock-controller@110e0000 {
+		compatible = "rockchip,rk3228-cru";
+		reg = <0x110e0000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	emmc: dwmmc@30020000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		reg = <0x30020000 0x4000>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <37500000>;
+		clock-freq-min-max = <400000 37500000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		bus-width = <8>;
+		default-sample-phase = <158>;
+		num-slots = <1>;
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@32010000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x32011000 0x1000>,
+		      <0x32012000 0x1000>,
+		      <0x32014000 0x2000>,
+		      <0x32016000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3228-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@11110000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11110000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@11120000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11120000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@11130000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11130000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@11140000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x11140000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 27 RK_FUNC_2 &pcfg_pull_none>,
+						<1 28 RK_FUNC_2 &pcfg_pull_none>,
+						<1 29 RK_FUNC_2 &pcfg_pull_none>,
+						<1 30 RK_FUNC_2 &pcfg_pull_none>,
+						<1 31 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
+						<2 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
+						<1 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+						<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			uart2_cts: uart2-cts {
+				rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart2_rts: uart2-rts {
+				rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 43949a6771f0..452ca2441e84 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -43,10 +43,26 @@
 
 / {
 	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
-};
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
+	vcc_lcd: vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		regulator-name = "vcc_lcd";
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wl: vcc-wl {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwr>;
+		regulator-name = "vcc_wl";
+		vin-supply = <&vcc_18>;
+	};
 };
 
 &i2c0 {
@@ -119,8 +135,8 @@
 
 			vdd_log: REG3 {
 				regulator-name = "VDD_LOG";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
 
@@ -133,7 +149,7 @@
 
 			vccio_sd: REG5 {
 				regulator-name = "VCCIO_SD";
-				regulator-min-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
@@ -152,7 +168,7 @@
 				regulator-always-on;
 			};
 
-			vcca_tp: REG8 {
+			vcc_tp: REG8 {
 				regulator-name = "VCCA_TP";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -189,3 +205,17 @@
 		};
 	};
 };
+
+&pinctrl {
+	lcd {
+		lcd_en: lcd-en  {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 18eb6cb495f4..736b08b0bfdd 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -43,17 +43,6 @@
 
 / {
 	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
-
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
-		#clock-cells = <0>;
-	};
-};
-
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
 };
 
 &i2c0 {
@@ -244,19 +233,3 @@
 		};
 	};
 };
-
-&gmac {
-	phy-supply = <&vcc_phy>;
-	phy-mode = "rgmii";
-	clock_in_out = "input";
-	snps,reset-gpio = <&gpio4 7 0>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 1000000>;
-	assigned-clocks = <&cru SCLK_MAC>;
-	assigned-clock-parents = <&ext_gmac>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	tx_delay = <0x30>;
-	rx_delay = <0x10>;
-	status = "ok";
-};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e7894b05..78d47f7d2938 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -89,6 +89,13 @@
 		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
 	};
 
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -103,7 +110,7 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
@@ -160,6 +167,10 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
 &emmc {
 	broken-cd;
 	bus-width = <8>;
@@ -172,11 +183,6 @@
 	status = "okay";
 };
 
-&hdmi {
-	ddc-i2c-bus = <&i2c5>;
-	status = "okay";
-};
-
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -191,6 +197,27 @@
 	vqmmc-supply = <&vccio_sd>;
 };
 
+&gmac {
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 20fa0ef0b96b..98c586a43c73 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -48,6 +48,14 @@
 		reg = <0 0x80000000>;
 	};
 
+	dovdd_1v8: dovdd-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dovdd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc28_dvp>;
+	};
+
 	ext_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -55,6 +63,22 @@
 		clock-output-names = "ext_gmac";
 	};
 
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcca_33>;
+		bb-supply = <&vcc_io>;
+		dvp-supply = <&dovdd_1v8>;
+		flash0-supply = <&vcc_flash>;
+		flash1-supply = <&vcc_lan>;
+		gpio30-supply = <&vcc_io>;
+		gpio1830-supply = <&vcc_io>;
+		lcdc-supply = <&vcc_io>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vccio_wl>;
+	};
+
 	ir: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		pinctrl-names = "default";
@@ -67,7 +91,7 @@
 		#size-cells = <0>;
 
 		button@0 {
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <116>;
@@ -96,7 +120,7 @@
 		};
 	};
 
-	vcc_sys: vsys-regulator {
+	vbat_wl: vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
 		regulator-min-microvolt = <5000000>;
@@ -160,6 +184,23 @@
 		regulator-always-on;
 		vin-supply = <&vcc_5v>;
 	};
+
+	/*
+	 * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
+	 * by the dvp_pwr pin.
+	 */
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
 };
 
 &cpu0 {
@@ -325,7 +366,7 @@
 				regulator-always-on;
 			};
 
-			vcc_18: REG11 {
+			vccio_wl: vcc_18: REG11 {
 				regulator-name = "vcc_18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -367,12 +408,23 @@
 		output-low;
 	};
 
+	pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
+		bias-pull-up;
+		drive-strength = <12>;
+	};
+
 	act8846 {
 		pwr_hold: pwr-hold {
 			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
 
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	gmac {
 		phy_int: phy-int {
 			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -410,6 +462,25 @@
 	};
 
 	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on firefly board so bump up to 12ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
+		};
+
 		sdmmc_pwr: sdmmc-pwr {
 			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
@@ -445,7 +516,8 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
-	vmmc-supply = <&vcc_18>;
+	vmmc-supply = <&vbat_wl>;
+	vqmmc-supply = <&vccio_wl>;
 	status = "okay";
 };
 
@@ -459,6 +531,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index f82b956ebf17..2ff9689d2e1b 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -74,11 +74,27 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
 
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcca_33>;
+		bb-supply = <&vcc_io>;
+		dvp-supply = <&vcc18_dvp>;
+		flash0-supply = <&vcc_flash>;
+		flash1-supply = <&vcc_lan>;
+		gpio30-supply = <&vcc_io>;
+		gpio1830-supply = <&vcc_io>;
+		lcdc-supply = <&vcc_io>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vccio_wl>;
+	};
+
 	ir: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@@ -86,6 +102,26 @@
 		pinctrl-0 = <&ir_int>;
 	};
 
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
 	vcc_sys: vsys-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_sys";
@@ -94,6 +130,31 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	/*
+	 * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+	 * by the dvp_pwr pin.
+	 */
+	vcc18_dvp: vcc18-dvp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc18-dvp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc28_dvp>;
+	};
+
+	vcc28_dvp: vcc28-dvp-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&dvp_pwr>;
+		regulator-name = "vcc28_dvp";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_io>;
+	};
 };
 
 &cpu0 {
@@ -109,6 +170,8 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
@@ -121,6 +184,8 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 	status = "okay";
 };
 
@@ -297,22 +362,22 @@
 				};
 			};
 
-			vcca_codec: LDO_REG8 {
+			vcca_33: LDO_REG8 {
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_codec";
+				regulator-name = "vcca_33";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-suspend-microvolt = <3300000>;
 				};
 			};
 
-			vcc_wl: SWITCH_REG1 {
+			vccio_wl: SWITCH_REG1 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-name = "vcc_wl";
+				regulator-name = "vccio_wl";
 				regulator-state-mem {
 					regulator-on-in-suspend;
 				};
@@ -388,6 +453,12 @@
 		};
 	};
 
+	dvp {
+		dvp_pwr: dvp-pwr {
+			rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	ir {
 		ir_int: ir-int {
 			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -405,6 +476,12 @@
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &tsadc {
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 14b9fc73c8a4..510a1d0d7abb 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -73,11 +73,18 @@
 			linux,code = <116>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			debounce-interval = <100>;
 		};
 	};
 
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
 	vcc_host: vcc-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -310,6 +317,12 @@
 		};
 	};
 
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
new file mode 100644
index 000000000000..e1ee9f949035
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -0,0 +1,304 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0x0 0x80000000>;
+		device_type = "memory";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	io_domains: io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcc_io>;
+		bb-supply = <&vcc_io>;
+		dvp-supply = <&vcc_18>;
+		flash0-supply = <&vcc_flash>;
+		flash1-supply = <&vccio_pmu>;
+		gpio30-supply = <&vccio_pmu>;
+		gpio1830 = <&vcc_io>;
+		lcdc-supply = <&vcc_io>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vcc_18>;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <150>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	phy-supply = <&vccio_pmu>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins &phy_rst>;
+	snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	rx_delay = <0x10>;
+	tx_delay = <0x30>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		system-power-controller;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-always-on;
+		regulator-enable-ramp-delay = <300>;
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-name = "vdd_gpu";
+		regulator-ramp-delay = <8000>;
+		vin-supply = <&vcc_sys>;
+	};
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	emmc {
+			emmc_reset: emmc-reset {
+				rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	gmac {
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO  &pcfg_output_high>;
+		};
+	};
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
new file mode 100644
index 000000000000..dd3ad2e93a6d
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -0,0 +1,226 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-rock2-som.dtsi"
+
+/ {
+	model = "Radxa Rock 2 Square";
+	compatible = "radxa,rock2-square", "rockchip,rk3288";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
+			label = "rock2:green:state1";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+			label = "rock2:blue:state2";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,dai-link@1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&hym8563>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable>;
+		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	};
+
+	vcc_usb_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		/* Always on as the rockchip usb phy doesn't have a vbus-supply
+		 * property
+		 */
+		regulator-always-on;
+		regulator-name = "vcc_host";
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;	/* wp not hooked up */
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&gmac {
+	status = "ok";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio {
+		wifi_enable: wifi-enable {
+			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi
index 340406652186..651b962e3d53 100644
--- a/arch/arm/boot/dts/rk3288-thermal.dtsi
+++ b/arch/arm/boot/dts/rk3288-thermal.dtsi
@@ -52,7 +52,7 @@ reserve_thermal: reserve_thermal {
 };
 
 cpu_thermal: cpu_thermal {
-	polling-delay-passive = <1000>; /* milliseconds */
+	polling-delay-passive = <100>; /* milliseconds */
 	polling-delay = <5000>; /* milliseconds */
 
 	thermal-sensors = <&tsadc 1>;
@@ -63,6 +63,11 @@ cpu_thermal: cpu_thermal {
 			hysteresis = <2000>; /* millicelsius */
 			type = "passive";
 		};
+		cpu_alert1: cpu_alert1 {
+			temperature = <75000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
 		cpu_crit: cpu_crit {
 			temperature = <90000>; /* millicelsius */
 			hysteresis = <2000>; /* millicelsius */
@@ -74,13 +79,18 @@ cpu_thermal: cpu_thermal {
 		map0 {
 			trip = <&cpu_alert0>;
 			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT 6>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
 				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 		};
 	};
 };
 
 gpu_thermal: gpu_thermal {
-	polling-delay-passive = <1000>; /* milliseconds */
+	polling-delay-passive = <100>; /* milliseconds */
 	polling-delay = <5000>; /* milliseconds */
 
 	thermal-sensors = <&tsadc 2>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
new file mode 100644
index 000000000000..cf5311d2617c
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -0,0 +1,139 @@
+/*
+ * Google Veyron Brain Rev 0 board device tree source
+ *
+ * Copyright 2014 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+	model = "Google Brain";
+	compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc33_sys: vcc33-sys {
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+		/* This is gated by vcc_18 too */
+	};
+
+	/* This turns on vbus for host2 and otg (dwc2) */
+	vcc5_host2: vcc5-host2-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_pwr_en>;
+		regulator-name = "vcc5_host2";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&pinctrl {
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb-host {
+		usb2_pwr_en: usb2-pwr-en {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_hdmi: SWITCH_REG2 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-name = "vcc18_hdmi";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 136d650dd05f..610769d99522 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -108,7 +108,7 @@
 	lid {
 		label = "Lid";
 		gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 		linux,code = <0>; /* SW_LID */
 		linux,input-type = <5>; /* EV_SW */
 		debounce-interval = <1>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
new file mode 100644
index 000000000000..c2f52cfb4d06
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -0,0 +1,176 @@
+/*
+ * Google Veyron Jaq Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+	model = "Google Jaq";
+	compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+		     "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+		     "google,veyron-jaq-rev1", "google,veyron-jaq",
+		     "google,veyron", "rockchip,rk3288";
+
+	panel_regulator: panel-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable_h>;
+		regulator-name = "panel_regulator";
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc18_lcd: vcc18-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&avdd_1v8_disp_en>;
+		regulator-name = "vcc18_lcd";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc18_wl>;
+	};
+
+	backlight_regulator: backlight-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_pwr_en>;
+		regulator-name = "backlight_regulator";
+		vin-supply = <&vcc33_sys>;
+		startup-delay-us = <15000>;
+	};
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	regulators {
+		mic_vcc: LDO_REG2 {
+			regulator-name = "mic_vcc";
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-state-mem {
+				regulator-off-in-suspend;
+			};
+		};
+	};
+};
+
+&sdmmc {
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+			&sdmmc_bus4>;
+};
+
+&vcc_5v {
+	enable-active-high;
+	gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+	backlight {
+		bl_pwr_en: bl_pwr_en {
+			rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buck-5v {
+		drv_5v: drv-5v {
+			rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	edp {
+		edp_hpd: edp_hpd {
+			rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+		};
+	};
+
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	lcd {
+		lcd_enable_h: lcd-en {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		avdd_1v8_disp_en: avdd-1v8-disp-en {
+			rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
new file mode 100644
index 000000000000..f36f6f459225
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -0,0 +1,250 @@
+/*
+ * Google Veyron Mickey Rev 0 board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-veyron.dtsi"
+
+/ {
+	model = "Google Mickey";
+	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+		     "google,veyron-mickey-rev0", "google,veyron-mickey",
+		     "google,veyron", "rockchip,rk3288";
+
+	vcc_5v: vcc-5v {
+		vin-supply = <&vcc33_sys>;
+	};
+
+	vcc33_io: vcc33_io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33_io";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc33_sys>;
+	};
+};
+
+&cpu_thermal {
+	/delete-node/ trips;
+	/delete-node/ cooling-maps;
+
+	trips {
+		cpu_alert_almost_warm: cpu_alert_almost_warm {
+			temperature = <63000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_warm: cpu_alert_warm {
+			temperature = <65000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_almost_hot: cpu_alert_almost_hot {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hot: cpu_alert_hot {
+			temperature = <82000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_hotter: cpu_alert_hotter {
+			temperature = <84000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert_very_hot: cpu_alert_very_hot {
+			temperature = <85000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * After 1st level, throttle the CPU down to as low as 1.4 GHz
+		 * and don't let the GPU go faster than 400 MHz.  Note that we
+		 * won't throttle the GPU lower than 400 MHz due to CPU
+		 * heat--we'll let the GPU do the rest itself.
+		 */
+		cpu_warm_limit_cpu {
+			trip = <&cpu_alert_warm>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT 4>;
+		};
+
+		/*
+		 * Add some discrete steps to help throttling system deal
+		 * with the fact that there are two passive cooling devices:
+		 * the CPU and the GPU.
+		 *
+		 * - 1.2 GHz - 1.0 GHz (almost hot)
+		 * - 800 MHz           (hot)
+		 * - 800 MHz - 696 MHz (hotter)
+		 * - 696 MHz - min     (very hot)
+		 *
+		 * Note:
+		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
+		 *   some pretty serious workload here and be happy.
+		 * - After 696 MHz we stop lowering voltage, so throttling
+		 *   past there is less effective.
+		 */
+		cpu_almost_hot_limit_cpu {
+			trip = <&cpu_alert_almost_hot>;
+			cooling-device =
+				<&cpu0 5 6>;
+		};
+		cpu_hot_limit_cpu {
+			trip = <&cpu_alert_hot>;
+			cooling-device =
+				<&cpu0 7 7>;
+		};
+		cpu_hotter_limit_cpu {
+			trip = <&cpu_alert_hotter>;
+			cooling-device =
+				<&cpu0 7 8>;
+		};
+		cpu_very_hot_limit_cpu {
+			trip = <&cpu_alert_very_hot>;
+			cooling-device =
+				<&cpu0 8 THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&i2s {
+	status = "okay";
+	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
+	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
+};
+
+&rk808 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+		    <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+	/delete-property/ vcc6-supply;
+	/delete-property/ vcc12-supply;
+
+	vcc11-supply = <&vcc33_sys>;
+
+	regulators {
+		/* vcc33_io is sourced directly from vcc33_sys */
+		/delete-node/ LDO_REG1;
+		/delete-node/ LDO_REG7;
+
+		/* This is not a pwren anymore, but the real power supply */
+		vdd10_lcd: LDO_REG7 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-name = "vdd10_lcd";
+			regulator-suspend-mem-disabled;
+		};
+
+		vcc18_lcd: LDO_REG8 {
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-name = "vcc18_lcd";
+			regulator-suspend-mem-disabled;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		power_hdmi_on: power-hdmi-on {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		dvs_1: dvs-1 {
+			rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		dvs_2: dvs-2 {
+			rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&usb_host0_ehci {
+	status = "disabled";
+};
+
+&usb_host1 {
+	status = "disabled";
+};
+
+&vcc50_hdmi {
+	enable-active-high;
+	gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&power_hdmi_on>;
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 8fd8ef2c72da..699beb0a9481 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -86,6 +86,10 @@
 	};
 };
 
+&emmc {
+	/delete-property/mmc-hs200-1_8v;
+};
+
 &gpio_keys {
 	pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
 
@@ -117,6 +121,18 @@
 	clock-frequency = <400000>;
 	i2c-scl-falling-time-ns = <50>;
 	i2c-scl-rising-time-ns = <300>;
+
+	touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&vcc33_touch>;
+		vccio-supply = <&vcc33_touch>;
+	};
 };
 
 &rk808 {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index a7ea7d06cf7f..b34a7b5b3f62 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -88,6 +88,14 @@
 	};
 };
 
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l>;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 860cea0a7613..412809c60d01 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -64,7 +64,7 @@
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			debounce-interval = <100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -416,7 +416,7 @@
 	status = "okay";
 
 	assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
-	assigned-clock-parents = <&cru SCLK_OTGPHY0>;
+	assigned-clock-parents = <&usbphy0>;
 	dr_mode = "host";
 };
 
@@ -550,18 +550,6 @@
 		};
 	};
 
-	/*
-	 * On Marvell-based hardware this is a no-connect.  Make sure we enable
-	 * the pullup so that the line doesn't float.  The pullup shouldn't
-	 * hurt on Broadcom-based hardware since the other side is actively
-	 * driving this signal.  As proof: we've already got a pullup on RX.
-	 */
-	uart0 {
-		uart0_cts: uart0-cts {
-			rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
-		};
-	};
-
 	write-protect {
 		fw_wp_ap: fw-wp-ap {
 			rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 4e7c6b7392af..31f7e20ef418 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -44,6 +44,7 @@
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3288-power.h>
 #include "skeleton.dtsi"
 
 / {
@@ -52,6 +53,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -132,7 +134,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -143,6 +145,7 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC2>;
 			clock-names = "apb_pclk";
 		};
@@ -153,6 +156,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -164,6 +168,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 		};
@@ -451,8 +456,10 @@
 		clock-names = "tsadc", "apb_pclk";
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
-		pinctrl-names = "default";
-		pinctrl-0 = <&otp_out>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
 		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -617,8 +624,101 @@
 	};
 
 	pmu: power-management@ff730000 {
-		compatible = "rockchip,rk3288-pmu", "syscon";
+		compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
 		reg = <0xff730000 0x100>;
+
+		power: power-controller {
+			compatible = "rockchip,rk3288-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			assigned-clocks = <&cru SCLK_EDP_24M>;
+			assigned-clock-parents = <&xin24m>;
+
+			/*
+			 * Note: Although SCLK_* are the working clocks
+			 * of device without including on the NOC, needed for
+			 * synchronous reset.
+			 *
+			 * The clocks on the which NOC:
+			 * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+			 * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+			 * ACLK_RGA is on ACLK_RGA_NIU.
+			 * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+			 *
+			 * Which clock are device clocks:
+			 *	clocks		devices
+			 *	*_IEP		IEP:Image Enhancement Processor
+			 *	*_ISP		ISP:Image Signal Processing
+			 *	*_VIP		VIP:Video Input Processor
+			 *	*_VOP*		VOP:Visual Output Processor
+			 *	*_RGA		RGA
+			 *	*_EDP*		EDP
+			 *	*_LVDS_*	LVDS
+			 *	*_HDMI		HDMI
+			 *	*_MIPI_*	MIPI
+			 */
+			pd_vio {
+				reg = <RK3288_PD_VIO>;
+				clocks = <&cru ACLK_IEP>,
+					 <&cru ACLK_ISP>,
+					 <&cru ACLK_RGA>,
+					 <&cru ACLK_VIP>,
+					 <&cru ACLK_VOP0>,
+					 <&cru ACLK_VOP1>,
+					 <&cru DCLK_VOP0>,
+					 <&cru DCLK_VOP1>,
+					 <&cru HCLK_IEP>,
+					 <&cru HCLK_ISP>,
+					 <&cru HCLK_RGA>,
+					 <&cru HCLK_VIP>,
+					 <&cru HCLK_VOP0>,
+					 <&cru HCLK_VOP1>,
+					 <&cru PCLK_EDP_CTRL>,
+					 <&cru PCLK_HDMI_CTRL>,
+					 <&cru PCLK_LVDS_PHY>,
+					 <&cru PCLK_MIPI_CSI>,
+					 <&cru PCLK_MIPI_DSI0>,
+					 <&cru PCLK_MIPI_DSI1>,
+					 <&cru SCLK_EDP_24M>,
+					 <&cru SCLK_EDP>,
+					 <&cru SCLK_ISP_JPE>,
+					 <&cru SCLK_ISP>,
+					 <&cru SCLK_RGA>;
+			};
+
+			/*
+			 * Note: The following 3 are HEVC(H.265) clocks,
+			 * and on the ACLK_HEVC_NIU (NOC).
+			 */
+			pd_hevc {
+				reg = <RK3288_PD_HEVC>;
+				clocks = <&cru ACLK_HEVC>,
+					 <&cru SCLK_HEVC_CABAC>,
+					 <&cru SCLK_HEVC_CORE>;
+			};
+
+			/*
+			 * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+			 * (video endecoder & decoder) clocks that on the
+			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+			 */
+			pd_video {
+				reg = <RK3288_PD_VIDEO>;
+				clocks = <&cru ACLK_VCODEC>,
+					 <&cru HCLK_VCODEC>;
+			};
+
+			/*
+			 * Note: ACLK_GPU is the GPU clock,
+			 * and on the ACLK_GPU_NIU (NOC).
+			 */
+			pd_gpu {
+				reg = <RK3288_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+			};
+		};
 	};
 
 	sgrf: syscon@ff740000 {
@@ -657,6 +757,21 @@
 		status = "disabled";
 	};
 
+	spdif: sound@ff88b0000 {
+		compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif";
+		reg = <0xff8b0000 0x10000>;
+		#sound-dai-cells = <0>;
+		clock-names = "hclk", "mclk";
+		clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
+		dmas = <&dmac_bus_s 3>;
+		dma-names = "tx";
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		rockchip,grf = <&grf>;
+		status = "disabled";
+	};
+
 	i2s: i2s@ff890000 {
 		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
 		reg = <0xff890000 0x10000>;
@@ -669,15 +784,30 @@
 		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
+		rockchip,playback-channels = <8>;
+		rockchip,capture-channels = <2>;
 		status = "disabled";
 	};
 
+	crypto: cypto-controller@ff8a0000 {
+		compatible = "rockchip,rk3288-crypto";
+		reg = <0xff8a0000 0x4000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+		resets = <&cru SRST_CRYPTO>;
+		reset-names = "crypto-rst";
+		status = "okay";
+	};
+
 	vopb: vop@ff930000 {
 		compatible = "rockchip,rk3288-vop";
 		reg = <0xff930000 0x19c>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopb_mmu>;
@@ -691,6 +821,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+			vopb_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
 		};
 	};
 
@@ -699,6 +833,7 @@
 		reg = <0xff930300 0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopb_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
@@ -709,6 +844,7 @@
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
 		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		power-domains = <&power RK3288_PD_VIO>;
 		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
 		reset-names = "axi", "ahb", "dclk";
 		iommus = <&vopl_mmu>;
@@ -722,6 +858,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+			vopl_out_mipi: endpoint@2 {
+				reg = <2>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
 		};
 	};
 
@@ -730,10 +870,42 @@
 		reg = <0xff940300 0x100>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "vopl_mmu";
+		power-domains = <&power RK3288_PD_VIO>;
 		#iommu-cells = <0>;
 		status = "disabled";
 	};
 
+	mipi_dsi: mipi@ff960000 {
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
 	hdmi: hdmi@ff980000 {
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0xff980000 0x20000>;
@@ -742,6 +914,7 @@
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
 		clock-names = "iahb", "isfr";
+		power-domains = <&power RK3288_PD_VIO>;
 		status = "disabled";
 
 		ports {
@@ -773,6 +946,19 @@
 		interrupts = <GIC_PPI 9 0xf04>;
 	};
 
+	efuse: efuse@ffb40000 {
+		compatible = "rockchip,rockchip-efuse";
+		reg = <0xffb40000 0x20>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		clocks = <&cru PCLK_EFUSE256>;
+		clock-names = "pclk_efuse";
+
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
 	usbphy: phy {
 		compatible = "rockchip,rk3288-usb-phy";
 		rockchip,grf = <&grf>;
@@ -785,6 +971,7 @@
 			reg = <0x320>;
 			clocks = <&cru SCLK_OTGPHY0>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy1: usb-phy1 {
@@ -792,6 +979,7 @@
 			reg = <0x334>;
 			clocks = <&cru SCLK_OTGPHY1>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 
 		usbphy2: usb-phy2 {
@@ -799,6 +987,7 @@
 			reg = <0x348>;
 			clocks = <&cru SCLK_OTGPHY2>;
 			clock-names = "phyclk";
+			#clock-cells = <0>;
 		};
 	};
 
@@ -927,6 +1116,13 @@
 			#interrupt-cells = <2>;
 		};
 
+		hdmi {
+			hdmi_ddc: hdmi-ddc {
+				rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
+						<7 20 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
 		pcfg_pull_up: pcfg-pull-up {
 			bias-pull-up;
 		};
@@ -1024,7 +1220,7 @@
 				rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
-			sdmmc_cd: sdmcc-cd {
+			sdmmc_cd: sdmmc-cd {
 				rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
@@ -1215,7 +1411,7 @@
 			};
 
 			uart0_cts: uart0-cts {
-				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
 			uart0_rts: uart0-rts {
@@ -1230,7 +1426,7 @@
 			};
 
 			uart1_cts: uart1-cts {
-				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
 			uart1_rts: uart1-rts {
@@ -1253,7 +1449,7 @@
 			};
 
 			uart3_cts: uart3-cts {
-				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
 			uart3_rts: uart3-rts {
@@ -1268,7 +1464,7 @@
 			};
 
 			uart4_cts: uart4-cts {
-				rockchip,pins = <5 14 3 &pcfg_pull_none>;
+				rockchip,pins = <5 14 3 &pcfg_pull_up>;
 			};
 
 			uart4_rts: uart4-rts {
@@ -1277,6 +1473,10 @@
 		};
 
 		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
 			otp_out: otp-out {
 				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
 			};
@@ -1338,5 +1538,11 @@
 						<4 3 3 &pcfg_pull_none>;
 			};
 		};
+
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 4497d288a7cb..99bbcc2c9b89 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -49,6 +49,7 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		ethernet0 = &emac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -66,7 +67,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -77,6 +78,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 		};
@@ -87,6 +89,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -98,6 +101,7 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-broken-no-flushp;
 			clocks = <&cru ACLK_DMA2>;
 			clock-names = "apb_pclk";
 		};
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index a5184ff56933..80f007550324 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -25,7 +25,7 @@
 		#size-cells = <0>;
 
 		cpu {
-			compatible = "arm,arm926ejs";
+			compatible = "arm,arm926ej-s";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index f00cea7aca2f..da24ab570b0e 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -46,7 +46,7 @@
 			regulator-name = "V_TF_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpios = <&mp05 4 0>;
+			gpio = <&mp05 4 0>;
 			enable-active-high;
 		};
 
@@ -257,7 +257,7 @@
 			linux,code = <KEY_POWER>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
@@ -268,7 +268,7 @@
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <3>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index a3d4643b202e..0a33d402138e 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -47,7 +47,7 @@
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			reg = <0>;
-			gpios = <&mp05 4 0>;
+			gpio = <&mp05 4 0>;
 			enable-active-high;
 		};
 
@@ -73,7 +73,7 @@
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
 			reg = <3>;
-			gpios = <&gpj1 3 0>;
+			gpio = <&gpj1 3 0>;
 			enable-active-high;
 		};
 	};
@@ -239,7 +239,7 @@
 			linux,code = <KEY_POWER>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
@@ -250,7 +250,7 @@
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <3>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index da7d210df670..54fcc3fc82e2 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -59,7 +59,7 @@
 
 &keypad {
 	linux,input-no-autorepeat;
-	linux,input-wakeup;
+	wakeup-source;
 	samsung,keypad-num-rows = <8>;
 	samsung,keypad-num-columns = <8>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 8344a0ee2b86..ffc36bd24d2f 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -130,7 +130,7 @@
 		amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
 			pdma0: dma@e0900000 {
diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h
new file mode 100644
index 000000000000..b0c912feaa2f
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2-pinfunc.h
@@ -0,0 +1,880 @@
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0				0
+#define PIN_PA0__GPIO			PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK		PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK		PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0			PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1				1
+#define PIN_PA1__GPIO			PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD		PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS		PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1			PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2				2
+#define PIN_PA2__GPIO			PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0		PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0		PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2			PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3				3
+#define PIN_PA3__GPIO			PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1		PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1		PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3			PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4				4
+#define PIN_PA4__GPIO			PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2		PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2		PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4			PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5				5
+#define PIN_PA5__GPIO			PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3		PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3		PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5			PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6				6
+#define PIN_PA6__GPIO			PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4		PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK		PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5			PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0		PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6			PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7				7
+#define PIN_PA7__GPIO			PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5		PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0		PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5			PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1		PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7			PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8				8
+#define PIN_PA8__GPIO			PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6		PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1		PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5			PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2		PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE		PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9				9
+#define PIN_PA9__GPIO			PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7		PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2		PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4			PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3		PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3			PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10			10
+#define PIN_PA10__GPIO			PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN		PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3		PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4			PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4		PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE		PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11			11
+#define PIN_PA11__GPIO			PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL		PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS		PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4			PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE		PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12			12
+#define PIN_PA12__GPIO			PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP		PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ			PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE		PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13			13
+#define PIN_PA13__GPIO			PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD		PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1		PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8			PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14			14
+#define PIN_PA14__GPIO			PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK		PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1			PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK		PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15			15
+#define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS		PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK		PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0		PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10			PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16			16
+#define PIN_PA16__GPIO			PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO		PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1			PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0		PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS		PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3		PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11			PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17			17
+#define PIN_PA17__GPIO			PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0		PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1			PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1		PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0		PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4		PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12			PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18			18
+#define PIN_PA18__GPIO			PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1		PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1			PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2		PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0		PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0		PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13			PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19			19
+#define PIN_PA19__GPIO			PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2		PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1			PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3		PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0			PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1		PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14			PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20			20
+#define PIN_PA20__GPIO			PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3		PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0			PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2		PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15			PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21			21
+#define PIN_PA21__GPIO			PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ			PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2			PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0			PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3		PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY		PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22			22
+#define PIN_PA22__GPIO			PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2		PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0			PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK			PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK		PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK		PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK		PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23			23
+#define PIN_PA23__GPIO			PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1		PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1			PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI			PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI		PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS		PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24			24
+#define PIN_PA24__GPIO			PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0		PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2			PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO			PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO		PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0		PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25			25
+#define PIN_PA25__GPIO			PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3		PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3			PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS			PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0		PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1		PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26			26
+#define PIN_PA26__GPIO			PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4		PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4			PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST			PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1		PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2		PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27			27
+#define PIN_PA27__GPIO			PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1			PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5			PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2		PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2		PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN		PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3		PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28			28
+#define PIN_PA28__GPIO			PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1			PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6			PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3		PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3		PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD		PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0		PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29			29
+#define PIN_PA29__GPIO			PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1			PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7			PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1		PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP		PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1		PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30			30
+#define PIN_PA30__GPIO			PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE		PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0		PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0			PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD		PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2		PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31			31
+#define PIN_PA31__GPIO			PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3			PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO		PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0			PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3		PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0				32
+#define PIN_PB0__GPIO			PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE		PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI		PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1			PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1				33
+#define PIN_PB1__GPIO			PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE		PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK		PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1			PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0		PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2				34
+#define PIN_PB2__GPIO			PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE		PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0			PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1		PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3				35
+#define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4			PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8			PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ			PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0		PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2		PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4				36
+#define PIN_PB4__GPIO			PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4			PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9			PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ			PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3		PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5				37
+#define PIN_PB5__GPIO			PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2			PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10			PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2			PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK		PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP		PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6				38
+#define PIN_PB6__GPIO			PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2			PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11			PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2			PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS		PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER			PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7				39
+#define PIN_PB7__GPIO			PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2			PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12			PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3			PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0		PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK			PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8				40
+#define PIN_PB8__GPIO			PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3			PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13			PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3			PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1		PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS			PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9				41
+#define PIN_PB9__GPIO			PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3			PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14			PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1			PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2		PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL			PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10			42
+#define PIN_PB10__GPIO			PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3			PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15			PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1		PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3		PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2			PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11			43
+#define PIN_PB11__GPIO			PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0		PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0		PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3			PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT		PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3			PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12			44
+#define PIN_PB12__GPIO			PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1		PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1			PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3			PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK		PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2			PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13			45
+#define PIN_PB13__GPIO			PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2		PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2			PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1			PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3			PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14			46
+#define PIN_PB14__GPIO			PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3		PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3			PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1			PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK		PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK		PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK			PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15			47
+#define PIN_PB15__GPIO			PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4		PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4			PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1			PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK		PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS		PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN			PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16			48
+#define PIN_PB16__GPIO			PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5		PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5			PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1			PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS		PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0		PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV			PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17			49
+#define PIN_PB17__GPIO			PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6		PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6			PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1			PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0		PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1		PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER			PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18			50
+#define PIN_PB18__GPIO			PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7		PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7			PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1			PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0		PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2		PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0			PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19			51
+#define PIN_PB19__GPIO			PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8		PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8			PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1			PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3			PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3		PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1			PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20			52
+#define PIN_PB20__GPIO			PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9		PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9			PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0			PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3			PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1			PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0			PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21			53
+#define PIN_PB21__GPIO			PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10		PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10			PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0			PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3			PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2		PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1			PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22			54
+#define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TDO			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23			55
+#define PIN_PB23__GPIO			PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12		PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12			PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0			PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2			PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0		PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO			PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24			56
+#define PIN_PB24__GPIO			PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13		PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13			PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0			PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2			PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3		PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10		PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25			57
+#define PIN_PB25__GPIO			PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14		PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14			PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0			PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4		PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11		PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26			58
+#define PIN_PB26__GPIO			PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15		PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15			PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0			PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT		PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0		PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27			59
+#define PIN_PB27__GPIO			PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16		PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16			PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0			PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK		PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1		PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28			60
+#define PIN_PB28__GPIO			PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17		PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17			PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0		PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5			PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2		PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29			61
+#define PIN_PB29__GPIO			PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18		PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18			PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1		PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5			PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3		PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30			62
+#define PIN_PB30__GPIO			PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19		PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19			PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2		PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5			PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4		PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31			63
+#define PIN_PB31__GPIO			PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20		PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20			PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3		PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0			PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5		PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0				64
+#define PIN_PC0__GPIO			PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21		PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23			PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4		PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0			PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6			PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1				65
+#define PIN_PC1__GPIO			PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22		PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24			PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0			PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK		PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK		PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7			PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2				66
+#define PIN_PC2__GPIO			PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23		PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25			PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0			PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI		PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK		PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8			PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3				67
+#define PIN_PC3__GPIO			PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM			PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT			PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1			PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO		PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS		PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9			PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4				68
+#define PIN_PC4__GPIO			PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP		PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1		PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1			PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0		PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0		PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK		PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5				69
+#define PIN_PC5__GPIO			PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC		PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0			PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1			PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1		PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0		PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC		PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6				70
+#define PIN_PC6__GPIO			PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC		PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1			PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1			PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2		PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC		PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7				71
+#define PIN_PC7__GPIO			PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK			PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2			PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1			PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3		PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1			PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK		PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8				72
+#define PIN_PC8__GPIO			PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN			PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY		PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ			PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0			PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1			PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD		PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9				73
+#define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10			74
+#define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2		PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK			PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1		PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4			PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0		PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11			75
+#define PIN_PC11__GPIO			PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3		PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN			PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2		PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4			PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0		PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0		PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12			76
+#define PIN_PC12__GPIO			PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4		PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV			PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3		PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3			PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0			PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1			PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13			77
+#define PIN_PC13__GPIO			PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5		PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER			PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4		PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3			PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0			PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2			PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14			78
+#define PIN_PC14__GPIO			PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TDO			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15			79
+#define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7		PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1			PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6		PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0			PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4			PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16			80
+#define PIN_PC16__GPIO			PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10		PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0			PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7		PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0			PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5			PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17			81
+#define PIN_PC17__GPIO			PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11		PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1			PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8		PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0			PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6			PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18			82
+#define PIN_PC18__GPIO			PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12		PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC			PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9		PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2		PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7			PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19			83
+#define PIN_PC19__GPIO			PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13		PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO			PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10		PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1		PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8			PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20			84
+#define PIN_PC20__GPIO			PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14		PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK			PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11		PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0		PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9			PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21			85
+#define PIN_PC21__GPIO			PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15		PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER			PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK		PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3		PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10			PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22			86
+#define PIN_PC22__GPIO			PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18		PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS			PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC		PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4		PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11			PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23			87
+#define PIN_PC23__GPIO			PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19		PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL			PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC		PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12			PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24			88
+#define PIN_PC24__GPIO			PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20		PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2			PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK		PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13			PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25			89
+#define PIN_PC25__GPIO			PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21		PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3			PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD		PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14			PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26			90
+#define PIN_PC26__GPIO			PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22		PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2			PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1		PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15			PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27			91
+#define PIN_PC27__GPIO			PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23		PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3			PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1			PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1		PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0			PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16			PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28			92
+#define PIN_PC28__GPIO			PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM		PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0		PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2			PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0			PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17			PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29			93
+#define PIN_PC29__GPIO			PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP		PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1		PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18			PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30			94
+#define PIN_PC30__GPIO			PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC		PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2		PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19			PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31			95
+#define PIN_PC31__GPIO			PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC		PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3		PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3			PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20			PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0				96
+#define PIN_PD0__GPIO			PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK			PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3			PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP		PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23			PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1				97
+#define PIN_PD1__GPIO			PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN			PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK			PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24			PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2				98
+#define PIN_PD2__GPIO			PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1			PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER			PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK		PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25			PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3				99
+#define PIN_PD3__GPIO			PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1			PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ			PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS			PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11		PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT			PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4				100
+#define PIN_PD4__GPIO			PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1			PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2			PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL			PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10		PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0			PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5				101
+#define PIN_PD5__GPIO			PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1			PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2			PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2			PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9			PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1			PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6				102
+#define PIN_PD6__GPIO			PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK			PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1			PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3			PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8			PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2			PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7				103
+#define PIN_PD7__GPIO			PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI			PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL		PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2			PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0			PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1		PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8				104
+#define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO			PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR		PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3			PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1			PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY		PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9				105
+#define PIN_PD9__GPIO			PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS			PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT		PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK			PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2			PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10			106
+#define PIN_PD10__GPIO			PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST			PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS		PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN			PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3		PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11			107
+#define PIN_PD11__GPIO			PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1			PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2			PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0		PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV			PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4		PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK		PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12			108
+#define PIN_PD12__GPIO			PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1			PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1		PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER			PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5		PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4		PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13			109
+#define PIN_PD13__GPIO			PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1			PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0	PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0			PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6		PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5		PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14			110
+#define PIN_PD14__GPIO			PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK			PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1	PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1			PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7		PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6		PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15			111
+#define PIN_PD15__GPIO			PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI			PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN	PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0			PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK		PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7		PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16			112
+#define PIN_PD16__GPIO			PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO			PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN	PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1			PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC		PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8		PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17			113
+#define PIN_PD17__GPIO			PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS			PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV	PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC			PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC		PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9		PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18			114
+#define PIN_PD18__GPIO			PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST			PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO			PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD		PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10		PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19			115
+#define PIN_PD19__GPIO			PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0			PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1			PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2			PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK		PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11		PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20			116
+#define PIN_PD20__GPIO			PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2			PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1			PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2			PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK		PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK		PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21			117
+#define PIN_PD21__GPIO			PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2			PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0			PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0		PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS		PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC		PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22			118
+#define PIN_PD22__GPIO			PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2			PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0			PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1		PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0		PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC		PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23			119
+#define PIN_PD23__GPIO			PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0		PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD		PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24			120
+#define PIN_PD24__GPIO			PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2			PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3		PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD25			121
+#define PIN_PD25__GPIO			PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK		PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4		PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26			122
+#define PIN_PD26__GPIO			PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI		PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0		PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27			123
+#define PIN_PD27__GPIO			PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO		PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK			PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1		PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28			124
+#define PIN_PD28__GPIO			PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0		PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI			PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2		PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29			125
+#define PIN_PD29__GPIO			PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1		PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO			PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3		PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3			PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0			PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30			126
+#define PIN_PD30__GPIO			PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2		PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS			PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4		PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3			PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0			PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31			127
+#define PIN_PD31__GPIO			PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG			PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST			PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ			PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3			PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0			PINMUX_PIN(PIN_PD31, 5, 2)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cc05cde0f9a4..78996bdbd3df 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -88,12 +88,6 @@
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
-
-		adc_op_clk: adc_op_clk{
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-		};
 	};
 
 	ns_sram: sram@00200000 {
@@ -263,6 +257,62 @@
 			cache-level = <2>;
 		};
 
+		nand0: nand@80000000 {
+			compatible = "atmel,sama5d2-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = < /* EBI CS3 */
+				0x80000000 0x08000000
+				/* SMC PMECC regs */
+				0xf8014070 0x00000490
+				/* SMC PMECC Error Location regs */
+				0xf8014500 0x00000200
+				/* ROM Galois tables */
+				0x00040000 0x00018000
+				>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			atmel,has-pmecc;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
+			status = "disabled";
+
+			nfc@c0000000 {
+				compatible = "atmel,sama5d4-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = < /* NFC Command Registers */
+					0xc0000000 0x08000000
+					/* NFC HSMC regs */
+					0xf8014000 0x00000070
+					/* NFC SRAM banks */
+					0x00100000 0x00100000
+					>;
+				clocks = <&hsmc_clk>;
+				atmel,write-by-sram;
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
+			clock-names = "hclock", "multclk", "baseclk";
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
+			clock-names = "hclock", "multclk", "baseclk";
+			status = "disabled";
+		};
+
 		apb {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -286,7 +336,7 @@
 			};
 
 			pmc: pmc@f0014000 {
-				compatible = "atmel,sama5d2-pmc";
+				compatible = "atmel,sama5d2-pmc", "syscon";
 				reg = <0xf0014000 0x160>;
 				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -619,6 +669,24 @@
 						atmel,clk-output-range = <0 83000000>;
 					};
 
+					pdmic_clk: pdmic_clk {
+						#clock-cells = <0>;
+						reg = <48>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					i2s0_clk: i2s0_clk {
+						#clock-cells = <0>;
+						reg = <54>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					i2s1_clk: i2s1_clk {
+						#clock-cells = <0>;
+						reg = <55>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
 					classd_clk: classd_clk {
 						#clock-cells = <0>;
 						reg = <59>;
@@ -697,6 +765,57 @@
 						reg = <53>;
 					};
 				};
+
+				gck {
+					compatible = "atmel,sama5d2-clk-generated";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					sdmmc0_gclk: sdmmc0_gclk {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					sdmmc1_gclk: sdmmc1_gclk {
+						#clock-cells = <0>;
+						reg = <32>;
+					};
+
+					tcb0_gclk: tcb0_gclk {
+						#clock-cells = <0>;
+						reg = <35>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					tcb1_gclk: tcb1_gclk {
+						#clock-cells = <0>;
+						reg = <36>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pwm_gclk: pwm_gclk {
+						#clock-cells = <0>;
+						reg = <38>;
+						atmel,clk-output-range = <0 83000000>;
+					};
+
+					pdmic_gclk: pdmic_gclk {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					i2s0_gclk: i2s0_gclk {
+						#clock-cells = <0>;
+						reg = <54>;
+					};
+
+					i2s1_gclk: i2s1_gclk {
+						#clock-cells = <0>;
+						reg = <55>;
+					};
+				};
 			};
 
 			sha@f0028000 {
@@ -709,7 +828,7 @@
 				dma-names = "tx";
 				clocks = <&sha_clk>;
 				clock-names = "sha_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			aes@f002c000 {
@@ -725,7 +844,7 @@
 				dma-names = "tx", "rx";
 				clocks = <&aes_clk>;
 				clock-names = "aes_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			spi0: spi@f8000000 {
@@ -776,10 +895,30 @@
 				clock-names = "t0_clk", "slow_clk";
 			};
 
+			pdmic: pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pdmic_clk>, <&pdmic_gclk>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
 			uart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart0_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -789,6 +928,13 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart1_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -798,6 +944,13 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart2_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -820,6 +973,32 @@
 				status = "disabled";
 			};
 
+			flx0: flexcom@f8034000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8034000 0x200>;
+				clocks = <&flx0_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8034000 0x800>;
+				status = "disabled";
+			};
+
+			flx1: flexcom@f8038000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8038000 0x200>;
+				clocks = <&flx1_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8038000 0x800>;
+				status = "disabled";
+			};
+
+			rstc@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
 			pit: timer@f8048030 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xf8048030 0x10>;
@@ -827,6 +1006,13 @@
 				clocks = <&h32ck>;
 			};
 
+			watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
 			sckc@f8048050 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xf8048050 0x4>;
@@ -883,6 +1069,13 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
 				clocks = <&uart3_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -891,12 +1084,49 @@
 			uart4: serial@fc00c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc00c000 0x100>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
 				clocks = <&uart4_clk>;
 				clock-names = "usart";
 				status = "disabled";
 			};
 
+			flx2: flexcom@fc010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc010000 0x200>;
+				clocks = <&flx2_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc010000 0x800>;
+				status = "disabled";
+			};
+
+			flx3: flexcom@fc014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc014000 0x200>;
+				clocks = <&flx3_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc014000 0x800>;
+				status = "disabled";
+			};
+
+			flx4: flexcom@fc018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc018000 0x200>;
+				clocks = <&flx4_clk>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc018000 0x800>;
+				status = "disabled";
+			};
+
 			aic: interrupt-controller@fc020000 {
 				#interrupt-cells = <3>;
 				compatible = "atmel,sama5d2-aic";
@@ -922,6 +1152,18 @@
 				status = "disabled";
 			};
 
+			adc: adc@fc030000 {
+				compatible = "atmel,sama5d2-adc";
+				reg = <0xfc030000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&adc_clk>;
+				clock-names = "adc_clk";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				status = "disabled";
+			};
+
 			pioA: pinctrl@fc038000 {
 				compatible = "atmel,sama5d2-pinctrl";
 				reg = <0xfc038000 0x600>;
@@ -935,6 +1177,22 @@
 				#gpio-cells = <2>;
 				clocks = <&pioA_clk>;
 			};
+
+			tdes@fc044000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&tdes_clk>;
+				clock-names = "tdes_clk";
+				status = "okay";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 7fa276515f11..a53279160f98 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -75,7 +75,7 @@
 		adc_op_clk: adc_op_clk{
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <20000000>;
+			clock-frequency = <1000000>;
 		};
 	};
 
@@ -322,6 +322,7 @@
 				atmel,adc-use-external-triggers;
 				atmel,adc-vref = <3000>;
 				atmel,adc-res = <10 12>;
+				atmel,adc-sample-hold-time = <11>;
 				atmel,adc-res-names = "lowres", "highres";
 				status = "disabled";
 
@@ -906,7 +907,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,sama5d3-pmc";
+				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xfffffc00 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts
index d9a9aca1ccfd..e812f5c1bf70 100644
--- a/arch/arm/boot/dts/sama5d35ek.dts
+++ b/arch/arm/boot/dts/sama5d35ek.dts
@@ -49,7 +49,7 @@
 			label = "pb_user1";
 			gpios = <&pioE 27 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 026b252f09b3..e21099a1aef9 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -24,9 +24,9 @@
 					};
 					pinctrl_mmc2_dat1_3: mmc2_dat1_3 {
 						atmel,pins =
-							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
-							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
-							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
+							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 83bee7a3a617..89010422812d 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -87,6 +87,8 @@
 					isi_0: endpoint {
 						remote-endpoint = <&ov2640_0>;
 						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 8d1de29e8da1..db1151c18466 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -386,7 +386,7 @@
 			};
 
 			pmc: pmc@f0018000 {
-				compatible = "atmel,sama5d3-pmc";
+				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xf0018000 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
@@ -451,7 +451,7 @@
 					interrupt-parent = <&pmc>;
 					interrupts = <AT91_PMC_MCKRDY>;
 					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <125000000 177000000>;
+					atmel,clk-output-range = <125000000 200000000>;
 					atmel,clk-divisors = <1 2 4 3>;
 				};
 
@@ -916,7 +916,7 @@
 			};
 
 			i2c0: i2c@f8014000 {
-				compatible = "atmel,at91sam9x5-i2c";
+				compatible = "atmel,sama5d4-i2c";
 				reg = <0xf8014000 0x4000>;
 				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1
@@ -935,15 +935,15 @@
 			};
 
 			i2c1: i2c@f8018000 {
-				compatible = "atmel,at91sam9x5-i2c";
+				compatible = "atmel,sama5d4-i2c";
 				reg = <0xf8018000 0x4000>;
 				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(4)>,
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(4))>,
 				       <&dma1
-					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(5)>;
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(5))>;
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
@@ -975,7 +975,7 @@
 			};
 
 			i2c2: i2c@f8024000 {
-				compatible = "atmel,at91sam9x5-i2c";
+				compatible = "atmel,sama5d4-i2c";
 				reg = <0xf8024000 0x4000>;
 				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
 				dmas = <&dma1
@@ -1189,6 +1189,19 @@
 				clock-names = "t0_clk", "slow_clk";
 			};
 
+			macb1: ethernet@fc028000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xfc028000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb1_rmii>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&macb1_clk>, <&macb1_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
 			adc0: adc@fc034000 {
 				compatible = "atmel,at91sam9x5-adc";
 				reg = <0xfc034000 0x100>;
@@ -1238,7 +1251,7 @@
 				dma-names = "tx", "rx";
 				clocks = <&aes_clk>;
 				clock-names = "aes_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			tdes@fc04c000 {
@@ -1252,7 +1265,7 @@
 				dma-names = "tx", "rx";
 				clocks = <&tdes_clk>;
 				clock-names = "tdes_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			sha@fc050000 {
@@ -1264,7 +1277,7 @@
 				dma-names = "tx";
 				clocks = <&sha_clk>;
 				clock-names = "sha_clk";
-				status = "disabled";
+				status = "okay";
 			};
 
 			rstc@fc068600 {
@@ -1287,7 +1300,7 @@
 			};
 
 			watchdog@fc068640 {
-				compatible = "atmel,at91sam9260-wdt";
+				compatible = "atmel,sama5d4-wdt";
 				reg = <0xfc068640 0x10>;
 				clocks = <&clk32k>;
 				status = "disabled";
@@ -1329,7 +1342,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;
@@ -1350,7 +1363,7 @@
 					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
 					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
 					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
-					0x00000000 0x00000000 0x00000000	/* pioD */
+					0x0003ff00 0x8002a800 0x00000000	/* pioD */
 					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
 					>;
 
@@ -1396,7 +1409,6 @@
 					interrupt-controller;
 					#interrupt-cells = <2>;
 					clocks = <&pioD_clk>;
-					status = "disabled";
 				};
 
 				pioE: gpio@fc06d000 {
@@ -1636,19 +1648,44 @@
 					};
 				};
 
+				macb1 {
+					pinctrl_macb1_rmii: macb1_rmii-0 {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX0 */
+							 AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TX1 */
+							 AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX0 */
+							 AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RX1 */
+							 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXDV */
+							 AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_RXER */
+							 AT91_PIOA  4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXEN */
+							 AT91_PIOA  2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_TXCK */
+							 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDC */
+							 AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* G1_MDIO */
+							>;
+					};
+				};
+
 				mmc0 {
 					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
 						atmel,pins =
 							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
-							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDB, conflict with NAND_D0 */
-							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB0, conflict with NAND_D1 */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDA, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA0, conflict with NAND_D1 */
 							>;
 					};
 					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
 						atmel,pins =
-							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB1, conflict with NAND_D2 */
-							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB2, conflict with NAND_D3 */
-							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB3, conflict with NAND_D4 */
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA3, conflict with NAND_D4 */
+							>;
+					};
+					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA4, conflict with NAND_D5 */
+							 AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA5, conflict with NAND_D6 */
+							 AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA6, conflict with NAND_D7 */
+							 AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DA7, conflict with NAND_OE */
 							>;
 					};
 				};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 24b4cd24dceb..aa8bae3b8fcf 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -147,7 +147,7 @@
 			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "SW1";
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -206,7 +206,7 @@
 	};
 
 	accelerometer@1d {
-		compatible = "adi,adxl34x";
+		compatible = "adi,adxl345";
 		reg = <0x1d>;
 		interrupt-parent = <&irqpin3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index ff7c8f298f30..bf825ca4f6f7 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -28,6 +28,7 @@
 			reg = <0>;
 			clock-frequency = <1196000000>;
 			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2>;
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -35,6 +36,7 @@
 			reg = <1>;
 			clock-frequency = <1196000000>;
 			power-domains = <&pd_a2sl>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -53,11 +55,23 @@
 		      <0xf0000100 0x100>;
 	};
 
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0xf0100000 0x1000>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_a3sm>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		arm,shared-override;
+		cache-unified;
+		cache-level = <2>;
+	};
+
 	sbsc2: memory-controller@fb400000 {
 		compatible = "renesas,sbsc-sh73a0";
 		reg = <0xfb400000 0x400>;
-		interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "sec", "temp";
 		power-domains = <&pd_a4bc1>;
 	};
@@ -65,22 +79,22 @@
 	sbsc1: memory-controller@fe400000 {
 		compatible = "renesas,sbsc-sh73a0";
 		reg = <0xfe400000 0x400>;
-		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "sec", "temp";
 		power-domains = <&pd_a4bc0>;
 	};
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	cmt1: timer@e6138000 {
 		compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
 		reg = <0xe6138000 0x200>;
-		interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
 		clock-names = "fck";
 		power-domains = <&pd_c5>;
@@ -99,14 +113,14 @@
 			<0xe6900020 1>,
 			<0xe6900040 1>,
 			<0xe6900060 1>;
-		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
-			      0 2 IRQ_TYPE_LEVEL_HIGH
-			      0 3 IRQ_TYPE_LEVEL_HIGH
-			      0 4 IRQ_TYPE_LEVEL_HIGH
-			      0 5 IRQ_TYPE_LEVEL_HIGH
-			      0 6 IRQ_TYPE_LEVEL_HIGH
-			      0 7 IRQ_TYPE_LEVEL_HIGH
-			      0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -121,14 +135,14 @@
 			<0xe6900024 1>,
 			<0xe6900044 1>,
 			<0xe6900064 1>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
-			      0 10 IRQ_TYPE_LEVEL_HIGH
-			      0 11 IRQ_TYPE_LEVEL_HIGH
-			      0 12 IRQ_TYPE_LEVEL_HIGH
-			      0 13 IRQ_TYPE_LEVEL_HIGH
-			      0 14 IRQ_TYPE_LEVEL_HIGH
-			      0 15 IRQ_TYPE_LEVEL_HIGH
-			      0 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -143,14 +157,14 @@
 			<0xe6900028 1>,
 			<0xe6900048 1>,
 			<0xe6900068 1>;
-		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
-			      0 18 IRQ_TYPE_LEVEL_HIGH
-			      0 19 IRQ_TYPE_LEVEL_HIGH
-			      0 20 IRQ_TYPE_LEVEL_HIGH
-			      0 21 IRQ_TYPE_LEVEL_HIGH
-			      0 22 IRQ_TYPE_LEVEL_HIGH
-			      0 23 IRQ_TYPE_LEVEL_HIGH
-			      0 24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -165,14 +179,14 @@
 			<0xe690002c 1>,
 			<0xe690004c 1>,
 			<0xe690006c 1>;
-		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
-			      0 26 IRQ_TYPE_LEVEL_HIGH
-			      0 27 IRQ_TYPE_LEVEL_HIGH
-			      0 28 IRQ_TYPE_LEVEL_HIGH
-			      0 29 IRQ_TYPE_LEVEL_HIGH
-			      0 30 IRQ_TYPE_LEVEL_HIGH
-			      0 31 IRQ_TYPE_LEVEL_HIGH
-			      0 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
 		power-domains = <&pd_a4s>;
 		control-parent;
@@ -183,10 +197,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6820000 0x425>;
-		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
-			      0 168 IRQ_TYPE_LEVEL_HIGH
-			      0 169 IRQ_TYPE_LEVEL_HIGH
-			      0 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -197,10 +211,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6822000 0x425>;
-		interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
-			      0 52 IRQ_TYPE_LEVEL_HIGH
-			      0 53 IRQ_TYPE_LEVEL_HIGH
-			      0 54 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -211,10 +225,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6824000 0x425>;
-		interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
-			      0 172 IRQ_TYPE_LEVEL_HIGH
-			      0 173 IRQ_TYPE_LEVEL_HIGH
-			      0 174 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -225,10 +239,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6826000 0x425>;
-		interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
-			      0 184 IRQ_TYPE_LEVEL_HIGH
-			      0 185 IRQ_TYPE_LEVEL_HIGH
-			      0 186 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
@@ -239,10 +253,10 @@
 		#size-cells = <0>;
 		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
 		reg = <0xe6828000 0x425>;
-		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
-			      0 188 IRQ_TYPE_LEVEL_HIGH
-			      0 189 IRQ_TYPE_LEVEL_HIGH
-			      0 190 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
 		power-domains = <&pd_c5>;
 		status = "disabled";
@@ -251,20 +265,64 @@
 	mmcif: mmc@e6bd0000 {
 		compatible = "renesas,sh-mmcif";
 		reg = <0xe6bd0000 0x100>;
-		interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
-			      0 141 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
 		power-domains = <&pd_a3sp>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
 
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e20000 0x0064>;
+		interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e10000 0x0064>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6e00000 0x0064>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof3: spi@e6c90000 {
+		compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
+		reg = <0xe6c90000 0x0064>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>;
+		power-domains = <&pd_a3sp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	sdhi0: sd@ee100000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee100000 0x100>;
-		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
-			      0 84 IRQ_TYPE_LEVEL_HIGH
-			      0 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
 		power-domains = <&pd_a3sp>;
 		cap-sd-highspeed;
@@ -275,8 +333,8 @@
 	sdhi1: sd@ee120000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee120000 0x100>;
-		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
-			      0 89 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
 		power-domains = <&pd_a3sp>;
 		toshiba,mmc-wrprotect-disable;
@@ -287,8 +345,8 @@
 	sdhi2: sd@ee140000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee140000 0x100>;
-		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
-			      0 105 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
 		power-domains = <&pd_a3sp>;
 		toshiba,mmc-wrprotect-disable;
@@ -299,9 +357,9 @@
 	scifa0: serial@e6c40000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c40000 0x100>;
-		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -309,9 +367,9 @@
 	scifa1: serial@e6c50000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c50000 0x100>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -319,9 +377,9 @@
 	scifa2: serial@e6c60000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c60000 0x100>;
-		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -329,9 +387,9 @@
 	scifa3: serial@e6c70000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c70000 0x100>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -339,9 +397,9 @@
 	scifa4: serial@e6c80000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6c80000 0x100>;
-		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -349,9 +407,9 @@
 	scifa5: serial@e6cb0000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6cb0000 0x100>;
-		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -359,9 +417,9 @@
 	scifa6: serial@e6cc0000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6cc0000 0x100>;
-		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -369,9 +427,9 @@
 	scifa7: serial@e6cd0000 {
 		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
 		reg = <0xe6cd0000 0x100>;
-		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -379,9 +437,9 @@
 	scifb: serial@e6c30000 {
 		compatible = "renesas,scifb-sh73a0", "renesas,scifb";
 		reg = <0xe6c30000 0x100>;
-		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 		power-domains = <&pd_a3sp>;
 		status = "disabled";
 	};
@@ -521,7 +579,7 @@
 		#sound-dai-cells = <1>;
 		compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
 		reg = <0xec230000 0x400>;
-		interrupts = <0 146 0x4>;
+		interrupts = <GIC_SPI 146 0x4>;
 		power-domains = <&pd_a4mp>;
 		status = "disabled";
 	};
@@ -533,7 +591,7 @@
 		#size-cells = <1>;
 		ranges = <0 0 0x20000000>;
 		reg = <0xfec10000 0x400>;
-		interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&zb_clk>;
 		power-domains = <&pd_a4s>;
 	};
@@ -798,13 +856,13 @@
 		mstp0_clks: mstp0_clks@e6150130 {
 			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0xe6150130 4>, <0xe6150030 4>;
-			clocks = <&cpg_clocks SH73A0_CLK_HP>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
-				SH73A0_CLK_IIC2
+				SH73A0_CLK_IIC2 SH73A0_CLK_MSIOF0
 			>;
 			clock-output-names =
-				"iic2";
+				"iic2", "msiof0";
 		};
 		mstp1_clks: mstp1_clks@e6150134 {
 			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -834,20 +892,24 @@
 			reg = <0xe6150138 4>, <0xe6150040 4>;
 			clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>,
 				 <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
-				 <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>,
-				 <&sub_clk>, <&sub_clk>;
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC
-				SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5
-				SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0
-				SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2
-				SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4
+				SH73A0_CLK_MP_DMAC SH73A0_CLK_MSIOF3
+				SH73A0_CLK_MSIOF1 SH73A0_CLK_SCIFA5
+				SH73A0_CLK_SCIFB SH73A0_CLK_MSIOF2
+				SH73A0_CLK_SCIFA0 SH73A0_CLK_SCIFA1
+				SH73A0_CLK_SCIFA2 SH73A0_CLK_SCIFA3
+				SH73A0_CLK_SCIFA4
 			>;
 			clock-output-names =
-				"scifa7", "sy_dmac", "mp_dmac", "scifa5",
-				"scifb", "scifa0", "scifa1", "scifa2",
-				"scifa3", "scifa4";
+				"scifa7", "sy_dmac", "mp_dmac", "msiof3",
+				"msiof1", "scifa5", "scifb", "msiof2",
+				"scifa0", "scifa1", "scifa2", "scifa3",
+				"scifa4";
 		};
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 314e589cfa00..b89cbde3b289 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -69,7 +69,7 @@
 		ranges;
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -513,6 +513,13 @@
 				};
 		};
 
+		fpgamgr0: fpgamgr@ff706000 {
+			compatible = "altr,socfpga-fpga-mgr";
+			reg = <0xff706000 0x1000
+			       0xffb90000 0x1000>;
+			interrupts = <0 175 4>;
+		};
+
 		gmac0: ethernet@ff700000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
 			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
@@ -549,46 +556,6 @@
 			status = "disabled";
 		};
 
-		i2c0: i2c@ffc04000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc04000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 158 0x4>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@ffc05000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc05000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 159 0x4>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@ffc06000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc06000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 160 0x4>;
-			status = "disabled";
-		};
-
-		i2c3: i2c@ffc07000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "snps,designware-i2c";
-			reg = <0xffc07000 0x1000>;
-			clocks = <&l4_sp_clk>;
-			interrupts = <0 161 0x4>;
-			status = "disabled";
-		};
-
 		gpio0: gpio@ff708000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -649,15 +616,64 @@
 			};
 		};
 
-		sdr: sdr@ffc25000 {
-			compatible = "syscon";
-			reg = <0xffc25000 0x1000>;
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
 		};
 
-		sdramedac {
-			compatible = "altr,sdram-edac";
-			altr,sdr-syscon = <&sdr>;
-			interrupts = <0 39 4>;
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		eccmgr: eccmgr@ffd08140 {
+			compatible = "altr,socfpga-ecc-manager";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			l2-ecc@ffd08140 {
+				compatible = "altr,socfpga-l2-ecc";
+				reg = <0xffd08140 0x4>;
+				interrupts = <0 36 1>, <0 37 1>;
+			};
+
+			ocram-ecc@ffd08144 {
+				compatible = "altr,socfpga-ocram-ecc";
+				reg = <0xffd08144 0x4>;
+				iram = <&ocram>;
+				interrupts = <0 178 1>, <0 179 1>;
+			};
 		};
 
 		L2: l2-cache@fffef000 {
@@ -681,6 +697,7 @@
 			#size-cells = <0>;
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
+			status = "disabled";
 		};
 
 		ocram: sram@ffff0000 {
@@ -688,6 +705,29 @@
 			reg = <0xffff0000 0x10000>;
 		};
 
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+			altr,modrst-offset = <0x10>;
+		};
+
+		scu: snoop-control-unit@fffec000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xfffec000 0x100>;
+		};
+
+		sdr: sdr@ffc25000 {
+			compatible = "syscon";
+			reg = <0xffc25000 0x1000>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 39 4>;
+		};
+
 		spi0: spi@fff00000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
@@ -699,11 +739,6 @@
 			status = "disabled";
 		};
 
-		scu: snoop-control-unit@fffec000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0xfffec000 0x100>;
-		};
-
 		spi1: spi@fff01000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
@@ -715,6 +750,11 @@
 			status = "disabled";
 		};
 
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
+
 		/* Local timer */
 		timer@fffec600 {
 			compatible = "arm,cortex-a9-twd-timer";
@@ -779,13 +819,6 @@
 			dma-names = "tx", "rx";
 		};
 
-		rst: rstmgr@ffd05000 {
-			#reset-cells = <1>;
-			compatible = "altr,rst-mgr";
-			reg = <0xffd05000 0x1000>;
-			altr,modrst-offset = <0x10>;
-		};
-
 		usbphy0: usbphy@0 {
 			#phy-cells = <0>;
 			compatible = "usb-nop-xceiv";
@@ -829,10 +862,5 @@
 			clocks = <&osc1>;
 			status = "disabled";
 		};
-
-		sysmgr: sysmgr@ffd08000 {
-			compatible = "altr,sys-mgr", "syscon";
-			reg = <0xffd08000 0x4000>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 2340fcb2b535..1c5e139e4d05 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -63,7 +63,7 @@
 		ranges;
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -519,6 +519,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02200 0x100>;
 			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -528,6 +529,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02300 0x100>;
 			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -537,6 +539,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02400 0x100>;
 			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -546,6 +549,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02500 0x100>;
 			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -555,6 +559,7 @@
 			compatible = "snps,designware-i2c";
 			reg = <0xffc02600 0x100>;
 			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -658,6 +663,7 @@
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
 			status = "disabled";
 		};
 
@@ -692,6 +698,8 @@
 			compatible = "snps,dwc2";
 			reg = <0xffb40000 0xffff>;
 			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 99aa9a1c8af0..567df98f1bb5 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -70,6 +70,33 @@
 	status = "okay";
 };
 
+&i2c1 {
+	speed-mode = <0>;
+	status = "okay";
+
+	/*
+	 * adjust the falling times to decrease the i2c frequency to 50Khz
+	 * because the LCD module does not work at the standard 100Khz
+	 */
+	i2c-sda-falling-time-ns = <6000>;
+	i2c-scl-falling-time-ns = <6000>;
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
 &uart1 {
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index a75a666032b2..3c8867862b0d 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -79,6 +79,7 @@
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index 555e9caf21e1..afea3645ada4 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -100,6 +100,7 @@
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
new file mode 100644
index 000000000000..f86f9c060d7a
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "DENX MCV";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GiB */
+	};
+};
+
+&mmc0 {	/* On-SoM eMMC */
+	bus-width = <8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
new file mode 100644
index 000000000000..7186a29b8b86
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcvevk.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5_mcv.dtsi"
+
+/ {
+	model = "DENX MCV EVK";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		stmpe-i2c0 = &stmpe1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&gpio0 {	/* GPIO  0 ... 28 */
+	status = "okay";
+};
+
+&gpio1 {	/* GPIO 29 ... 57 */
+	status = "okay";
+};
+
+&gpio2 {	/* GPIO 58..66 (HLGPI 0..13 at offset 13) */
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	speed-mode = <0>;
+
+	stmpe1: stmpe811@41 {
+		compatible = "st,stmpe811";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x41>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-gpio = <&portb 28 0x4>;     /* GPIO 57, trig. level HI */
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			reg = <0>;
+			ts,sample-time = <4>;
+			ts,mod-12b = <1>;
+			ts,ref-sel = <0>;
+			ts,adc-freq = <1>;
+			ts,ave-ctrl = <1>;
+			ts,touch-det-delay = <3>;
+			ts,settling = <4>;
+			ts,fraction-z = <7>;
+			ts,i-drive = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index d4d0a28fb331..15e43f43f244 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -84,6 +84,7 @@
 	cd-gpios = <&portb 18 0>;
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 48bf651bd762..b61f22f9ac9f 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -80,6 +80,7 @@
 &mmc0 {
 	vmmc-supply = <&regulator_3_3v>;
 	vqmmc-supply = <&regulator_3_3v>;
+	status = "okay";
 };
 
 &usb1 {
diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts
index e48857249ce7..84101e4eebbf 100644
--- a/arch/arm/boot/dts/spear1310-evb.dts
+++ b/arch/arm/boot/dts/spear1310-evb.dts
@@ -161,7 +161,7 @@
 				linux,code = <0x100>;
 				gpios = <&gpio0 7 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts
index c611f5606dfe..6565f3cb866f 100644
--- a/arch/arm/boot/dts/spear1340-evb.dts
+++ b/arch/arm/boot/dts/spear1340-evb.dts
@@ -223,7 +223,7 @@
 				linux,code = <0x100>;
 				gpios = <&gpio1 1 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 0aa6fef5ce22..0d0da1f65f0e 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -141,7 +141,7 @@
 				linux,code = <0x100>;
 				gpios = <&stmpegpio 3 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 
 			button@2 {
@@ -149,7 +149,7 @@
 				linux,code = <0x200>;
 				gpios = <&stmpegpio 2 0x4>;
 				debounce-interval = <20>;
-				gpio-key,wakeup = <1>;
+				wakeup-source;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 50f5e9d09203..341f5b7ed242 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -512,63 +512,51 @@
 
 				// DB8500_REGULATOR_VAPE
 				db8500_vape_reg: db8500_vape {
-					regulator-compatible = "db8500_vape";
 					regulator-always-on;
 				};
 
 				// DB8500_REGULATOR_VARM
 				db8500_varm_reg: db8500_varm {
-					regulator-compatible = "db8500_varm";
 				};
 
 				// DB8500_REGULATOR_VMODEM
 				db8500_vmodem_reg: db8500_vmodem {
-					regulator-compatible = "db8500_vmodem";
 				};
 
 				// DB8500_REGULATOR_VPLL
 				db8500_vpll_reg: db8500_vpll {
-					regulator-compatible = "db8500_vpll";
 				};
 
 				// DB8500_REGULATOR_VSMPS1
 				db8500_vsmps1_reg: db8500_vsmps1 {
-					regulator-compatible = "db8500_vsmps1";
 				};
 
 				// DB8500_REGULATOR_VSMPS2
 				db8500_vsmps2_reg: db8500_vsmps2 {
-					regulator-compatible = "db8500_vsmps2";
 				};
 
 				// DB8500_REGULATOR_VSMPS3
 				db8500_vsmps3_reg: db8500_vsmps3 {
-					regulator-compatible = "db8500_vsmps3";
 				};
 
 				// DB8500_REGULATOR_VRF1
 				db8500_vrf1_reg: db8500_vrf1 {
-					regulator-compatible = "db8500_vrf1";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSP
 				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
-					regulator-compatible = "db8500_sva_mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
 				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
-					regulator-compatible = "db8500_sva_mmdsp_ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAPIPE
 				db8500_sva_pipe_reg: db8500_sva_pipe {
-					regulator-compatible = "db8500_sva_pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSP
 				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
-					regulator-compatible = "db8500_sia_mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
@@ -577,39 +565,32 @@
 
 				// DB8500_REGULATOR_SWITCH_SIAPIPE
 				db8500_sia_pipe_reg: db8500_sia_pipe {
-					regulator-compatible = "db8500_sia_pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SGA
 				db8500_sga_reg: db8500_sga {
-					regulator-compatible = "db8500_sga";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
 				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
-					regulator-compatible = "db8500_b2r2_mcde";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12
 				db8500_esram12_reg: db8500_esram12 {
-					regulator-compatible = "db8500_esram12";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12RET
 				db8500_esram12_ret_reg: db8500_esram12_ret {
-					regulator-compatible = "db8500_esram12_ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34
 				db8500_esram34_reg: db8500_esram34 {
-					regulator-compatible = "db8500_esram34";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34RET
 				db8500_esram34_ret_reg: db8500_esram34_ret {
-					regulator-compatible = "db8500_esram34_ret";
 				};
 			};
 
@@ -721,7 +702,6 @@
 					compatible = "stericsson,ab8500-ext-regulator";
 
 					ab8500_ext1_reg: ab8500_ext1 {
-						regulator-compatible = "ab8500_ext1";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
 						regulator-boot-on;
@@ -729,7 +709,6 @@
 					};
 
 					ab8500_ext2_reg: ab8500_ext2 {
-						regulator-compatible = "ab8500_ext2";
 						regulator-min-microvolt = <1360000>;
 						regulator-max-microvolt = <1360000>;
 						regulator-boot-on;
@@ -737,7 +716,6 @@
 					};
 
 					ab8500_ext3_reg: ab8500_ext3 {
-						regulator-compatible = "ab8500_ext3";
 						regulator-min-microvolt = <3400000>;
 						regulator-max-microvolt = <3400000>;
 						regulator-boot-on;
@@ -750,7 +728,6 @@
 
 					// supplies to the display/camera
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-						regulator-compatible = "ab8500_ldo_aux1";
 						regulator-min-microvolt = <2500000>;
 						regulator-max-microvolt = <2900000>;
 						regulator-boot-on;
@@ -760,56 +737,46 @@
 
 					// supplies to the on-board eMMC
 					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
-						regulator-compatible = "ab8500_ldo_aux2";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
 
 					// supply for VAUX3; SDcard slots
 					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
-						regulator-compatible = "ab8500_ldo_aux3";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
 
 					// supply for v-intcore12; VINTCORE12 LDO
 					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
-						regulator-compatible = "ab8500_ldo_intcore";
 					};
 
 					// supply for tvout; gpadc; TVOUT LDO
 					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
-						regulator-compatible = "ab8500_ldo_tvout";
 					};
 
 					// supply for ab8500-usb; USB LDO
 					ab8500_ldo_usb_reg: ab8500_ldo_usb {
-						regulator-compatible = "ab8500_ldo_usb";
 					};
 
 					// supply for ab8500-vaudio; VAUDIO LDO
 					ab8500_ldo_audio_reg: ab8500_ldo_audio {
-						regulator-compatible = "ab8500_ldo_audio";
 					};
 
 					// supply for v-anamic1 VAMIC1 LDO
 					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
-						regulator-compatible = "ab8500_ldo_anamic1";
 					};
 
 					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
 					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
-						regulator-compatible = "ab8500_ldo_anamic2";
 					};
 
 					// supply for v-dmic; VDMIC LDO
 					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
-						regulator-compatible = "ab8500_ldo_dmic";
 					};
 
 					// supply for U8500 CSI/DSI; VANA LDO
 					ab8500_ldo_ana_reg: ab8500_ldo_ana {
-						regulator-compatible = "ab8500_ldo_ana";
 					};
 				};
 			};
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 78b75256c638..c3987ad06d79 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -114,6 +114,8 @@
 				rohm,touch-max-x = <384>;
 				rohm,touch-max-y = <704>;
 				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
 			};
 
 			bu21013_tp@5d {
@@ -124,6 +126,8 @@
 				rohm,touch-max-x = <384>;
 				rohm,touch-max-y = <704>;
 				rohm,flip-y;
+				pinctrl-names = "default";
+				pinctrl-0 = <&touch_rohm_mode>;
 			};
 		};
 
@@ -166,6 +170,25 @@
 					};
 				};
 			};
+			touch {
+				touch_rohm_mode: touch_rohm {
+					/*
+					 * ROHM touch screen uses GPIO 143 for
+					 * RST1, GPIO 146 for RST2 and
+					 * GPIO 67 for interrupts. Pull-up
+					 * the IRQ line and drive both
+					 * reset signals low.
+					 */
+					stuib_cfg1 {
+						pins = "GPIO143_D12", "GPIO146_D13";
+						ste,config = <&gpio_out_lo>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO67_G2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 0e1c96943d47..55f9d0cc90f3 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -37,7 +37,6 @@
 	};
 
 	soc {
-		/* Add Synaptics touch screen, TC35893 keypad etc here */
 		i2c@80004000 {
 			tc35893@44 {
 				compatible = "toshiba,tc35893";
@@ -66,7 +65,7 @@
 					keypad,num-columns = <8>;
 					keypad,num-rows = <8>;
 					linux,no-autorepeat;
-					linux,wakeup;
+					wakeup-source;
 					linux,keymap = <0x0301006b
 						        0x04010066
 							0x06040072
@@ -104,13 +103,40 @@
 					     <19 IRQ_TYPE_EDGE_RISING>;
 			};
 			lsm303dlh@1e {
-				/* Magnetometer */
+				/*
+				 * This magnetometer is packaged with
+				 * the accelerometer, and has a DRDY line,
+				 * however it is not connected on this
+				 * board so it can not generate interrupts.
+				 */
 				compatible = "st,lsm303dlh-magn";
 				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+			ak8974@0f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
-				pinctrl-0 = <&magneto_tvk_mode>;
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 			};
 			l3g4200d@68 {
 				/* Gyroscope */
@@ -119,6 +145,10 @@
 				reg = <0x68>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_magn_tvk_mode>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 			};
 			lsp001wm@5c {
 				/* Barometer/pressure sensor */
@@ -128,6 +158,33 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 			};
 		};
+
+		i2c@80110000 {
+			synaptics@4b {
+				/* Synaptics RMI4 TM1217 touchscreen */
+				compatible = "syna,rmi4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x4b>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&synaptics_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+				rmi-f01@1 {
+					reg = <0x1>;
+					syna,nosleep = <1>;
+				};
+				rmi-f11@11 {
+					reg = <0x11>;
+					touchscreen-inverted-x;
+					syna,sensor-type = <1>;
+				};
+			};
+		};
+
 		pinctrl {
 			/* Pull up this GPIO pin */
 			tc35893 {
@@ -159,23 +216,37 @@
 					/* Accelerometer interrupt lines 1 & 2 */
 					tvk_cfg {
 						pins = "GPIO82_C1", "GPIO83_D3";
-						ste,config = <&gpio_in_pu>;
+						ste,config = <&gpio_in_pd>;
 					};
 				};
 			};
-			magnetometer {
-				magneto_tvk_mode: magneto_tvk {
-					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+			gyroscope {
+				/*
+				 * These lines are shared between Gyroscope l3g400dh
+				 * and AK8974 magnetometer.
+				 */
+				gyro_magn_tvk_mode: gyro_magn_tvk {
+					 /* GPIO 31 used for INT pull down the line */
 					tvk_cfg1 {
 						pins = "GPIO31_V3";
-						ste,config = <&gpio_in_pu>;
+						ste,config = <&gpio_in_pd>;
 					};
+					/* GPIO 32 used for DRDY, pull this down */
 					tvk_cfg2 {
 						pins = "GPIO32_V2";
 						ste,config = <&gpio_in_pd>;
 					};
 				};
 			};
+			synaptics {
+				synaptics_tvk_mode: synaptics_tvk {
+					/* Touchscreen uses GPIO 84 */
+					tvk_cfg1 {
+						pins = "GPIO84_C2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
index 9c2387b34d0c..149a72e7e37a 100644
--- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi
@@ -43,7 +43,6 @@
 				  <&vaudio_hf_hrefv60_mode>,
 				  <&gbf_hrefv60_mode>,
 				  <&hdtv_hrefv60_mode>,
-				  <&touch_hrefv60_mode>,
 				  <&gpios_hrefv60_mode>;
 
 			sdi0 {
@@ -190,23 +189,6 @@
 					};
 				 };
 			};
-			touch {
-				touch_hrefv60_mode: touch_hrefv60 {
-					/*
-					 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
-					 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
-					 * reset signals low.
-					 */
-					hrefv60_cfg1 {
-						pins = "GPIO143_D12", "GPIO146_D13";
-						ste,config = <&gpio_out_lo>;
-					};
-					hrefv60_cfg2 {
-						pins = "GPIO67_G2";
-						ste,config = <&gpio_in_pu>;
-					};
-				};
-			};
 			mcde {
 				lcd_hrefv60_mode: lcd_hrefv60 {
 					/*
diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts
index 35282c0105c6..789329030658 100644
--- a/arch/arm/boot/dts/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts
@@ -163,7 +163,7 @@
 			label = "user_button";
 			gpios = <&gpio0 3 0x1>;
 			linux,code = <1>; /* KEY_ESC */
-			gpio-key,wakeup;
+			wakeup-source;
 			pinctrl-names = "default";
 			pinctrl-0 = <&user_button_default_mode>;
 		};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 314f59c12162..e2be53343064 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -25,9 +25,9 @@
 		cache-sets = <512>;
 		cache-line-size = <32>;
 		/* At full speed latency must be >=2 */
-		arm,tag-latency = <2>;
-		arm,data-latency = <2 2>;
-		arm,dirty-latency = <2>;
+		arm,tag-latency = <8>;
+		arm,data-latency = <8 8>;
+		arm,dirty-latency = <8>;
 	};
 
 	mtu0: mtu@101e2000 {
@@ -127,22 +127,14 @@
 			};
 			mmcsd_default_mode: mmcsd_default {
 				mmcsd_default_cfg1 {
-					/* MCCLK */
-					pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
-					pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13", "GPIO23_D15";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
 				};
 			};
 		};
@@ -729,7 +721,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -802,10 +794,21 @@
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
-			max-frequency = <48000000>;
+			max-frequency = <400000>;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index e80e42163883..08f82077b64d 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -281,7 +281,8 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&magneto_snowball_mode>;
-				gpios = <&gpio5 5 0x4>; /* DRDY line */
+				interrupt-parent = <&gpio5>;
+				interrupts = <5 IRQ_TYPE_EDGE_RISING>; /* DRDY line */
 			};
 			l3g4200d@68 {
 				/* Gyroscope */
@@ -292,9 +293,9 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&gyro_snowball_mode>;
-				gpios = <&gpio5 6 0x4>; /* DRDY line */
 				interrupt-parent = <&gpio5>;
-				interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
+				interrupts = <6 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+					     <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
 			};
 			lsp001wm@5c {
 				/* Barometer/pressure sensor */
diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 82a661677e97..2f5107ffeef0 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -315,21 +315,17 @@
 			ab3100-regulators {
 				compatible = "stericsson,ab3100-regulators";
 				ab3100_ldo_a_reg: ab3100_ldo_a {
-					regulator-compatible = "ab3100_ldo_a";
 					startup-delay-us = <200>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 				ab3100_ldo_c_reg: ab3100_ldo_c {
-					regulator-compatible = "ab3100_ldo_c";
 					startup-delay-us = <200>;
 				};
 				ab3100_ldo_d_reg: ab3100_ldo_d {
-					regulator-compatible = "ab3100_ldo_d";
 					startup-delay-us = <200>;
 				};
 				ab3100_ldo_e_reg: ab3100_ldo_e {
-					regulator-compatible = "ab3100_ldo_e";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					startup-delay-us = <200>;
@@ -337,7 +333,6 @@
 					regulator-boot-on;
 				};
 				ab3100_ldo_f_reg: ab3100_ldo_f {
-					regulator-compatible = "ab3100_ldo_f";
 					regulator-min-microvolt = <2500000>;
 					regulator-max-microvolt = <2500000>;
 					startup-delay-us = <600>;
@@ -345,28 +340,23 @@
 					regulator-boot-on;
 				};
 				ab3100_ldo_g_reg: ab3100_ldo_g {
-					regulator-compatible = "ab3100_ldo_g";
 					regulator-min-microvolt = <1500000>;
 					regulator-max-microvolt = <2850000>;
 					startup-delay-us = <400>;
 				};
 				ab3100_ldo_h_reg: ab3100_ldo_h {
-					regulator-compatible = "ab3100_ldo_h";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <2750000>;
 					startup-delay-us = <200>;
 				};
 				ab3100_ldo_k_reg: ab3100_ldo_k {
-					regulator-compatible = "ab3100_ldo_k";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <2750000>;
 					startup-delay-us = <200>;
 				};
 				ab3100_ext_reg: ab3100_ext {
-					regulator-compatible = "ab3100_ext";
 				};
 				ab3100_buck_reg: ab3100_buck {
-					regulator-compatible = "ab3100_buck";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1800000>;
 					startup-delay-us = <1000>;
@@ -394,7 +384,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index 6d93475be554..c8ad905d0309 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -25,6 +25,7 @@
 
 	aliases {
 		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
 	};
 
 };
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 0c24fcb03577..81f81214cdf9 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -152,6 +152,19 @@
 					<ST_IRQ_SYSCFG_DISABLED>;
 		};
 
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+		};
+
 		serial@9830000 {
 			compatible = "st,asc";
 			reg = <0x9830000 0x2c>;
@@ -396,6 +409,8 @@
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi1_default>;
 
 			status = "disabled";
 		};
@@ -406,6 +421,8 @@
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi2_default>;
 
 			status = "disabled";
 		};
@@ -416,6 +433,8 @@
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi3_default>;
 
 			status = "disabled";
 		};
@@ -426,6 +445,8 @@
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi4_default>;
 
 			status = "disabled";
 		};
@@ -437,6 +458,8 @@
 			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_sysin>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi10_default>;
 
 			status = "disabled";
 		};
@@ -447,6 +470,8 @@
 			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_sysin>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi11_default>;
 
 			status = "disabled";
 		};
@@ -457,6 +482,8 @@
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_sysin>;
 			clock-names = "ssc";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_spi12_default>;
 
 			status = "disabled";
 		};
@@ -585,7 +612,6 @@
 		/* COMMS PWM Module */
 		pwm0: pwm@9810000 {
 			compatible	= "st,sti-pwm";
-			status		= "okay";
 			#pwm-cells	= <2>;
 			reg		= <0x9810000 0x68>;
 			pinctrl-names	= "default";
@@ -593,12 +619,13 @@
 			clock-names	= "pwm";
 			clocks		= <&clk_sysin>;
 			st,pwm-num-chan = <1>;
+
+			status		= "disabled";
 		};
 
 		/* SBC PWM Module */
 		pwm1: pwm@9510000 {
 			compatible	= "st,sti-pwm";
-			status		= "okay";
 			#pwm-cells	= <2>;
 			reg		= <0x9510000 0x68>;
 			pinctrl-names	= "default";
@@ -609,6 +636,49 @@
 			clock-names	= "pwm";
 			clocks		= <&clk_sysin>;
 			st,pwm-num-chan = <4>;
+
+			status		= "disabled";
+		};
+
+		rng10: rng@08a89000 {
+			compatible      = "st,rng";
+			reg		= <0x08a89000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		rng11: rng@08a8a000 {
+			compatible      = "st,rng";
+			reg		= <0x08a8a000 0x1000>;
+			clocks          = <&clk_sysin>;
+			status		= "okay";
+		};
+
+		ethernet0: dwmac@9630000 {
+			device_type = "network";
+			status = "disabled";
+			compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			reg = <0x9630000 0x8000>, <0x80 0x4>;
+			reg-names = "stmmaceth", "sti-ethconf";
+
+			st,syscon = <&syscfg_sbc_reg 0x80>;
+			st,gmac_en;
+			resets = <&softreset STIH407_ETH1_SOFTRESET>;
+			reset-names = "stmmaceth";
+
+			interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+				     <GIC_SPI 99 IRQ_TYPE_NONE>;
+			interrupt-names = "macirq", "eth_wake_irq";
+
+			/* DMA Bus Mode */
+			snps,pbl = <8>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_rgmii1>;
+
+			clock-names = "stmmaceth", "sti-ethclk";
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
 		};
 
 		rng10: rng@08a89000 {
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 1683debd0854..a538ae52d32b 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -53,7 +53,7 @@
 			reg = <0x0961f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09610000 0x6000>;
 
 			pio0: gpio@09610000 {
@@ -107,12 +107,38 @@
 				st,retime-pin-mask = <0x3f>;
 			};
 
+			cec0 {
+				pinctrl_cec0_default: cec0-default {
+					st,pins {
+						hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+					};
+				};
+			};
+
 			rc {
 				pinctrl_ir: ir0 {
 					st,pins {
 						ir = <&pio4 0 ALT2 IN>;
 					};
 				};
+
+				pinctrl_uhf: uhf0 {
+					st,pins {
+						ir = <&pio4 1 ALT2 IN>;
+					};
+				};
+
+				pinctrl_tx: tx0 {
+					st,pins {
+						tx = <&pio4 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_tx_od: tx_od0 {
+					st,pins {
+						tx_od = <&pio4 3 ALT2 OUT>;
+					};
+				};
 			};
 
 			/* SBC_ASC0 - UART10 */
@@ -190,9 +216,9 @@
 						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
 						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
 						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
-						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
 						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
-						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>;
 					};
 				};
 
@@ -230,6 +256,33 @@
 						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
 					};
 				};
+
+				pinctrl_rmii1: rmii1-0 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk: rmii1_phyclk {
+					st,pins {
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+
+				pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+					st,pins {
+						phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+					};
+				};
 			};
 
 			pwm1 {
@@ -254,6 +307,57 @@
 					};
 				};
 			};
+
+			spi10 {
+				pinctrl_spi10_default: spi10-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 OUT>;
+						mrst = <&pio4 7 ALT1 IN>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+						scl = <&pio4 5 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi11 {
+				pinctrl_spi11_default: spi11-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 OUT>;
+						mrst = <&pio3 0 ALT2 IN>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+						scl = <&pio3 2 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi12 {
+				pinctrl_spi12_default: spi12-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 OUT>;
+						mrst = <&pio3 4 ALT2 IN>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+						scl = <&pio3 7 ALT2 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front0 {
@@ -264,7 +368,7 @@
 			reg = <0x0920f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09200000 0x10000>;
 
 			pio10: pio@09200000 {
@@ -422,20 +526,180 @@
 			};
 
 			i2c3 {
-				pinctrl_i2c3_default: i2c3-default {
+				pinctrl_i2c3_default: i2c3-alt1-0 {
 					st,pins {
 						sda = <&pio18 6 ALT1 BIDIR>;
 						scl = <&pio18 5 ALT1 BIDIR>;
 					};
 				};
+				pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+					st,pins {
+						sda = <&pio17 7 ALT1 BIDIR>;
+						scl = <&pio17 6 ALT1 BIDIR>;
+					};
+				};
+				pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+					st,pins {
+						sda = <&pio13 6 ALT3 BIDIR>;
+						scl = <&pio13 5 ALT3 BIDIR>;
+					};
+				};
 			};
 
 			spi0 {
-				pinctrl_spi0_default: spi0-default {
+				pinctrl_spi0_default: spi0-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 OUT>;
+						mrst = <&pio10 7 ALT2 IN>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+						scl = <&pio10 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 OUT>;
+						mrst = <&pio19 5 ALT1 IN>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+						scl = <&pio19 6 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi1 {
+				pinctrl_spi1_default: spi1-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 OUT>;
+						mrst = <&pio11 2 ALT2 IN>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+						scl = <&pio11 0 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
 					st,pins {
-						mtsr = <&pio12 6 ALT2 BIDIR>;
-						mrst = <&pio12 7 ALT2 BIDIR>;
-						scl = <&pio12 5 ALT2 BIDIR>;
+						mtsr = <&pio14 3 ALT1 OUT>;
+						mrst = <&pio14 4 ALT1 IN>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+						scl = <&pio14 2 ALT1 OUT>;
+					};
+				};
+			};
+
+			spi2 {
+				pinctrl_spi2_default: spi2-4w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 OUT>;
+						mrst = <&pio12 7 ALT2 IN>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+						scl = <&pio12 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 OUT>;
+						mrst = <&pio14 7 ALT1 IN>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+						scl = <&pio14 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 OUT>;
+						mrst = <&pio15 7 ALT2 IN>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+
+				pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+					st,pins {
+						mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+						scl = <&pio15 5 ALT2 OUT>;
+					};
+				};
+			};
+
+			spi3 {
+				pinctrl_spi3_default: spi3-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 OUT>;
+						mrst = <&pio13 7 ALT3 IN>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+						scl = <&pio13 5 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 OUT>;
+						mrst = <&pio17 5 ALT1 IN>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+						scl = <&pio17 6 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 OUT>;
+						mrst = <&pio18 7 ALT1 IN>;
+						scl = <&pio18 5 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+					st,pins {
+						mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+						scl = <&pio18 5 ALT1 OUT>;
 					};
 				};
 			};
@@ -627,6 +891,18 @@
 					};
 				};
 			};
+
+			systrace {
+				pinctrl_systrace_default: systrace-default {
+					st,pins {
+						trc_data0 = <&pio11 3 ALT5 OUT>;
+						trc_data1 = <&pio11 4 ALT5 OUT>;
+						trc_data2 = <&pio11 5 ALT5 OUT>;
+						trc_data3 = <&pio11 6 ALT5 OUT>;
+						trc_clk   = <&pio11 7 ALT5 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front1 {
@@ -637,7 +913,7 @@
 			reg = <0x0921f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09210000 0x10000>;
 
 			tsin4 {
@@ -670,7 +946,7 @@
 			reg = <0x0922f080 0x4>;
 			reg-names = "irqmux";
 			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
-			interrupts-names = "irqmux";
+			interrupt-names = "irqmux";
 			ranges = <0 0x09220000 0x6000>;
 
 			pio30: gpio@09220000 {
@@ -758,6 +1034,47 @@
 					};
 				};
 			};
+
+			spi4 {
+				pinctrl_spi4_default: spi4-4w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 OUT>;
+						mrst = <&pio30 2 ALT1 IN>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+					st,pins {
+						mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+						scl = <&pio30 0 ALT1 OUT>;
+					};
+				};
+
+				pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 OUT>;
+						mrst = <&pio34 2 ALT3 IN>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+
+				pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+					st,pins {
+						mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+						scl = <&pio34 0 ALT3 OUT>;
+					};
+				};
+			};
+
+			serial3 {
+				pinctrl_serial3: serial3-0 {
+					st,pins {
+						tx = <&pio31 3 ALT1 OUT>;
+						rx = <&pio31 4 ALT1 IN>;
+					};
+				};
+			};
 		};
 
 		pin-controller-flash {
@@ -811,6 +1128,57 @@
 						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
 					};
 				};
+				pinctrl_sd0: sd0-0 {
+					st,pins {
+						sd_clk = <&pio40 6 ALT1 BIDIR>;
+						sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+						sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+						sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+						sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+						sd_led = <&pio42 0 ALT2 OUT>;
+						sd_pwren = <&pio42 2 ALT2 OUT>;
+						sd_vsel = <&pio42 3 ALT2 OUT>;
+						sd_cd = <&pio42 4 ALT2 IN>;
+						sd_wp = <&pio42 5 ALT2 IN>;
+					};
+				};
+			};
+
+			fsm {
+				pinctrl_fsm: fsm {
+					st,pins {
+						spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+						spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+						spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+						spi-fsm-miso = <&pio40 3 ALT1 IN>;
+						spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+						spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+					};
+				};
+			};
+
+			nand {
+				pinctrl_nand: nand {
+					st,pins {
+						nand_cs1 = <&pio40 6 ALT3 OUT>;
+						nand_cs0 = <&pio40 7 ALT3 OUT>;
+						nand_d0 = <&pio41 0 ALT3 BIDIR>;
+						nand_d1 = <&pio41 1 ALT3 BIDIR>;
+						nand_d2 = <&pio41 2 ALT3 BIDIR>;
+						nand_d3 = <&pio41 3 ALT3 BIDIR>;
+						nand_d4 = <&pio41 4 ALT3 BIDIR>;
+						nand_d5 = <&pio41 5 ALT3 BIDIR>;
+						nand_d6 = <&pio41 6 ALT3 BIDIR>;
+						nand_d7 = <&pio41 7 ALT3 BIDIR>;
+						nand_we = <&pio42 0 ALT3 OUT>;
+						nand_dqs = <&pio42 1 ALT3 OUT>;
+						nand_ale = <&pio42 2 ALT3 OUT>;
+						nand_cle = <&pio42 3 ALT3 OUT>;
+						nand_rnb = <&pio42 4 ALT3 IN>;
+						nand_oe = <&pio42 5 ALT3 OUT>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 6b914e4bb099..d60f0d8add26 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -10,19 +10,6 @@
 #include "stih407-family.dtsi"
 / {
 	soc {
-		/* Display */
-		vtg_main: sti-vtg-main@8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
-
-		vtg_aux: sti-vtg-aux@8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
-		};
-
 		sti-display-subsystem {
 			compatible = "st,sti-display-subsystem";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 16f02c5e33a4..118ac284fc4b 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -25,6 +25,7 @@
 
 	aliases {
 		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
 	};
 
 	soc {
@@ -35,5 +36,29 @@
 			sd-uhs-sdr104;
 			sd-uhs-ddr50;
 		};
+
+		usb2_picophy1: phy2 {
+			status = "okay";
+		};
+
+		usb2_picophy2: phy3 {
+			status = "okay";
+		};
+
+		ohci0: usb@9a03c00 {
+			status = "okay";
+		};
+
+		ehci0: usb@9a03e00 {
+			status = "okay";
+		};
+
+		ohci1: usb@9a83c00 {
+			status = "okay";
+		};
+
+		ehci1: usb@9a83e00 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 8c6e61a27234..18ed1ad10d32 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -22,6 +22,8 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY0_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		usb2_picophy2: phy3 {
@@ -31,6 +33,8 @@
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 				 <&picophyreset STIH407_PICOPHY1_RESET>;
 			reset-names = "global", "port";
+
+			status = "disabled";
 		};
 
 		ohci0: usb@9a03c00 {
@@ -43,6 +47,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci0: usb@9a03e00 {
@@ -57,6 +63,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy1>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ohci1: usb@9a83c00 {
@@ -69,6 +77,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
+
+			status = "disabled";
 		};
 
 		ehci1: usb@9a83e00 {
@@ -83,19 +93,8 @@
 			reset-names = "power", "softreset";
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
-		};
-
-		/* Display */
-		vtg_main: sti-vtg-main@8d02800 {
-			compatible = "st,vtg";
-			reg = <0x8d02800 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
-		};
 
-		vtg_aux: sti-vtg-aux@8d00200 {
-			compatible = "st,vtg";
-			reg = <0x8d00200 0x100>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+			status = "disabled";
 		};
 
 		sti-display-subsystem {
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 82eee39ccb31..772d2bb07e5f 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -24,6 +24,7 @@
 
 	aliases {
 		ttyAS0 = &sbc_serial0;
+		ethernet0 = &ethernet0;
 	};
 
 	soc {
@@ -101,5 +102,12 @@
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
+
+		ethernet0: dwmac@9630000 {
+			st,tx-retime-src = "clkgen";
+			status = "okay";
+			phy-mode = "rgmii";
+			fixed-link = <0 1 1000 0 0>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index 148e1772465f..ae6d9978ea19 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -44,7 +44,7 @@
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
-				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+				compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32";
 
 				clocks = <&clk_sysin>;
 
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 8160a75539a4..965f88160718 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -99,5 +99,11 @@
 			phys = <&usb2_picophy2>;
 			phy-names = "usb";
 		};
+
+		mmc0: sdhci@09060000 {
+			assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			assigned-clock-parents = <&clk_s_c0_pll1 0>;
+			assigned-clock-rates = <200000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index f589fe487f13..133375bc8aa5 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -6,6 +6,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <dt-bindings/clock/stih407-clks.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/c8sectpfe.h>
 / {
 	soc {
 		sbc_serial0: serial@9530000 {
@@ -27,14 +30,28 @@
 			};
 		};
 
-		i2c@9842000 {
+		pwm0: pwm@9810000 {
 			status = "okay";
 		};
 
-		i2c@9843000 {
+		pwm1: pwm@9510000 {
 			status = "okay";
 		};
 
+		ssc2: i2c@9842000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
+		ssc3: i2c@9843000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
 		i2c@9844000 {
 			status = "okay";
 		};
@@ -79,5 +96,44 @@
 			status = "okay";
 		};
 
+		ethernet0: dwmac@9630000 {
+			st,tx-retime-src = "clkgen";
+			status = "okay";
+			phy-mode = "rgmii";
+			fixed-link = <0 1 1000 0 0>;
+		};
+
+		demux@08a20000 {
+			compatible	= "st,stih407-c8sectpfe";
+			status		= "okay";
+			reg		= <0x08a20000 0x10000>,
+					  <0x08a00000 0x4000>;
+			reg-names	= "c8sectpfe", "c8sectpfe-ram";
+			interrupts	= <GIC_SPI 34 IRQ_TYPE_NONE>,
+					  <GIC_SPI 35 IRQ_TYPE_NONE>;
+			interrupt-names	= "c8sectpfe-error-irq",
+					  "c8sectpfe-idle-irq";
+			pinctrl-0	= <&pinctrl_tsin0_serial>;
+			pinctrl-1	= <&pinctrl_tsin0_parallel>;
+			pinctrl-2	= <&pinctrl_tsin3_serial>;
+			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
+			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
+			pinctrl-names	= "tsin0-serial",
+					  "tsin0-parallel",
+					  "tsin3-serial",
+					  "tsin4-serial",
+					  "tsin5-serial";
+			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
+			clock-names	= "c8sectpfe";
+
+			/* tsin0 is TSA on NIMA */
+			tsin0: port@0 {
+				tsin-num	= <0>;
+				serial-not-parallel;
+				i2c-bus		= <&ssc2>;
+				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 6964fc9e97cf..6bfc5959dac3 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -58,18 +58,68 @@
 	};
 
 	memory {
-		reg = <0xc0000000 0x2000000>;
+		reg = <0x00000000 0x2000000>;
 	};
 
 	aliases {
 		serial0 = &usart1;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		green {
+			gpios = <&gpiog 6 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		orange {
+			gpios = <&gpiog 7 1>;
+		};
+		red {
+			gpios = <&gpiog 10 1>;
+		};
+		blue {
+			gpios = <&gpiog 12 1>;
+		};
+	};
+
+	usbotg_hs_phy: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 30>;
+		clock-names = "main_clk";
+	};
 };
 
 &clk_hse {
 	clock-frequency = <25000000>;
 };
 
+&ethernet0 {
+	status = "okay";
+	pinctrl-0	= <&ethernet0_mii>;
+	pinctrl-names	= "default";
+	phy-mode	= "mii-id";
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
 &usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index f0b731db6f53..01408073dd53 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -64,6 +64,17 @@
 	aliases {
 		serial0 = &usart1;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		red {
+			gpios = <&gpiog 14 0>;
+		};
+		green {
+			gpios = <&gpiog 13 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
 };
 
 &clk_hse {
@@ -71,5 +82,7 @@
 };
 
 &usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 5e1e234e8c0a..35df462559ca 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 
 / {
 	clocks {
@@ -57,6 +58,8 @@
 	};
 
 	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+
 		timer2: timer@40000000 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000000 0x400>;
@@ -168,6 +171,160 @@
 			status = "disabled";
 		};
 
+		syscfg: system-config@40013800 {
+			compatible = "syscon";
+			reg = <0x40013800 0x400>;
+		};
+
+		pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stm32f429-pinctrl";
+			ranges = <0 0x40020000 0x3000>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 0>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 1>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 2>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 3>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 4>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 5>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 6>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 7>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 8>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 9>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 10>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg_hs@0 {
+				pins {
+					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet0_mii: mii@0 {
+				pins {
+					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+						 <STM32F429_PA2_FUNC_ETH_MDIO>,
+						 <STM32F429_PC1_FUNC_ETH_MDC>,
+						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+					slew-rate = <2>;
+				};
+			};
+		};
+
 		rcc: rcc@40023810 {
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
@@ -175,6 +332,62 @@
 			clocks = <&clk_hse>;
 		};
 
+		dma1: dma-controller@40026000 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026000 0x400>;
+			interrupts = <11>,
+				     <12>,
+				     <13>,
+				     <14>,
+				     <15>,
+				     <16>,
+				     <17>,
+				     <47>;
+			clocks = <&rcc 0 21>;
+			#dma-cells = <4>;
+		};
+
+		dma2: dma-controller@40026400 {
+			compatible = "st,stm32-dma";
+			reg = <0x40026400 0x400>;
+			interrupts = <56>,
+				     <57>,
+				     <58>,
+				     <59>,
+				     <60>,
+				     <68>,
+				     <69>,
+				     <70>;
+			clocks = <&rcc 0 22>;
+			#dma-cells = <4>;
+			st,mem2mem;
+		};
+
+		ethernet0: dwmac@40028000 {
+			compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			interrupts = <61>, <62>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			clock-names = "stmmaceth", "tx-clk", "rx-clk";
+			clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
+			st,syscon = <&syscfg 0x4>;
+			snps,pbl = <8>;
+			snps,mixed-burst;
+			dma-ranges;
+			status = "disabled";
+		};
+
+		usbotg_hs: usb@40040000 {
+			compatible = "snps,dwc2";
+			dma-ranges;
+			reg = <0x40040000 0x40000>;
+			interrupts = <77>;
+			clocks = <&rcc 0 29>;
+			clock-names = "otg";
+			status = "disabled";
+		};
+
 		rng: rng@50060800 {
 			compatible = "st,stm32-rng";
 			reg = <0x50060800 0x400>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
new file mode 100644
index 000000000000..e911af836471
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32F469i-DISCO board";
+	compatible = "st,stm32f469i-disco", "st,stm32f469";
+
+	chosen {
+		bootargs = "root=/dev/ram rdinit=/linuxrc";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x00000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+};
+
+&clk_hse {
+	clock-frequency = <8000000>;
+};
+
+&usart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 2630d78d9e04..97570cb7f2fc 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -93,6 +93,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 143056872650..023b03efa5ff 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -45,6 +45,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Chuwi V7 CW0825";
@@ -78,6 +79,27 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5306de4: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+	};
+};
+
 &lradc {
 	vref-supply = <&reg_vcc3v0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 046a84d9719d..710e2ef516a8 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -83,6 +83,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
index 570754d8df67..ac64781a0a9c 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -47,6 +47,7 @@
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Gemei G9 Tablet";
@@ -64,12 +65,22 @@
 /*
  * TODO:
  *   2x cameras via CSI
- *   bma250 IRQs
  *   AXP battery management
  *   NAND
  *   OTG
  *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
  */
+&codec {
+	/* PH15 controls power to external amplifier (ft2012q) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
 
 &ehci0 {
 	status = "okay";
@@ -85,15 +96,13 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupts = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
+#include "axp209.dtsi"
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
@@ -103,17 +112,13 @@
 	bma250@18 {
 		compatible = "bosch,bma250";
 		reg = <0x18>;
-
-		/*
-		 * TODO: interrupt pins:
-		 * int1 - PH00
-		 * int2 - PI10
-		 */
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
 	};
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
+	vref-supply = <&reg_ldo2>;
 
 	status = "okay";
 
@@ -149,6 +154,40 @@
 	status = "okay";
 };
 
+&pio {
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 43f58fbe161c..9103864fef90 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -87,6 +87,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb2_vbus {
 	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 	status = "okay";
@@ -102,7 +126,17 @@
 	allwinner,pins = "PH6";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
new file mode 100644
index 000000000000..e09053bf5e1f
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -0,0 +1,274 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "iNet-1";
+	compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin_inet>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0  {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5x: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_wake_pin>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* PB13 */
+		touchscreen-size-x = <600>;
+		touchscreen-size-y = <1024>;
+		touchscreen-swapped-x-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0  {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin_inet: bl_en_pin@0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	touchscreen_wake_pin: touchscreen_wake_pin@0 {
+		allwinner,pins = "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 6c927a824ba2..04b0d2d1ae6c 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -47,6 +47,8 @@
 #include "sunxi-common-regulators.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "INet-97F Rev 02";
@@ -61,8 +63,8 @@
 	};
 };
 
-&ehci0 {
-	status = "okay";
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
 };
 
 &ehci1 {
@@ -75,12 +77,71 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
 
-		interrupt-controller;
-		#interrupt-cells = <1>;
+	button@800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
 	};
 };
 
@@ -94,15 +155,52 @@
 	status = "okay";
 };
 
-&ohci0 {
+&otg_sram {
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
 };
 
-&reg_usb1_vbus {
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
 	status = "okay";
 };
 
@@ -116,8 +214,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
-	usb1_vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
new file mode 100644
index 000000000000..bba4f9cf9bf5
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -0,0 +1,400 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "iNet-9F Rev 03";
+	compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys-polled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_inet9f>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		button@0 {
+			label = "Left Joystick Left";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 6 GPIO_ACTIVE_LOW>; /* PA6 */
+		};
+
+		button@1 {
+			label = "Left Joystick Right";
+			linux,code = <ABS_X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 5 GPIO_ACTIVE_LOW>; /* PA5 */
+		};
+
+		button@2 {
+			label = "Left Joystick Up";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
+		};
+
+		button@3 {
+			label = "Left Joystick Down";
+			linux,code = <ABS_Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		};
+
+		button@4 {
+			label = "Right Joystick Left";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 1 GPIO_ACTIVE_LOW>; /* PA1 */
+		};
+
+		button@5 {
+			label = "Right Joystick Right";
+			linux,code = <ABS_Z>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 0 GPIO_ACTIVE_LOW>; /* PA0 */
+		};
+
+		button@6 {
+			label = "Right Joystick Up";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 0 3 GPIO_ACTIVE_LOW>; /* PA3 */
+		};
+
+		button@7 {
+			label = "Right Joystick Down";
+			linux,code = <ABS_RZ>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+		};
+
+		button@8 {
+			label = "DPad Left";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 23 GPIO_ACTIVE_LOW>; /* PH23 */
+		};
+
+		button@9 {
+			label = "DPad Right";
+			linux,code = <ABS_HAT0X>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */
+		};
+
+		button@10 {
+			label = "DPad Up";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <0xffffffff>; /* -1 */
+			gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */
+		};
+
+		button@11 {
+			label = "DPad Down";
+			linux,code = <ABS_HAT0Y>;
+			linux,input-type = <EV_ABS>;
+			linux,input-value = <1>;
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+		};
+
+		button@12 {
+			label = "Button X";
+			linux,code = <BTN_X>;
+			gpios = <&pio 0 16 GPIO_ACTIVE_LOW>; /* PA16 */
+		};
+
+		button@13 {
+			label = "Button Y";
+			linux,code = <BTN_Y>;
+			gpios = <&pio 0 14 GPIO_ACTIVE_LOW>; /* PA14 */
+		};
+
+		button@14 {
+			label = "Button A";
+			linux,code = <BTN_A>;
+			gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
+		};
+
+		button@15 {
+			label = "Button B";
+			linux,code = <BTN_B>;
+			gpios = <&pio 0 15 GPIO_ACTIVE_LOW>; /* PA15 */
+		};
+
+		button@16 {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&pio 0 11 GPIO_ACTIVE_LOW>; /* PA11 */
+		};
+
+		button@17 {
+			label = "Start Button";
+			linux,code = <BTN_START>;
+			gpios = <&pio 0 12 GPIO_ACTIVE_LOW>; /* PA12 */
+		};
+
+		button@18 {
+			label = "Top Left Button";
+			linux,code = <BTN_TL>;
+			gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
+		};
+
+		button@19 {
+			label = "Top Right Button";
+			linux,code = <BTN_TR>;
+			gpios = <&pio 0 13 GPIO_ACTIVE_LOW>; /* PA13 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	ft5406ee8: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@600 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button@800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@1000 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	key_pins_inet9f: key_pins@0 {
+		allwinner,pins = "PA0", "PA1", "PA3", "PA4",
+				 "PA5", "PA6", "PA8", "PA9",
+				 "PA11", "PA12", "PA13",
+				 "PA14", "PA15", "PA16", "PA17",
+				 "PH22", "PH23", "PH24", "PH25", "PH26";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
index 985e15503378..4e798f014c99 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -1,5 +1,6 @@
 /*
  * Copyright 2015 Josef Gajdusek <atx@atx.name>
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -42,22 +43,11 @@
 
 /dts-v1/;
 #include "sun4i-a10.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-itead-core-common.dtsi"
 
 / {
 	model = "Iteaduino Plus A10";
 	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
 };
 
 &ahci {
@@ -65,18 +55,6 @@
 	status = "okay";
 };
 
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_pins_a>;
@@ -89,12 +67,7 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
 	axp209: pmic@34 {
-		reg = <0x34>;
 		interrupts = <0>;
 	};
 };
@@ -135,68 +108,13 @@
 	status = "okay";
 };
 
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
 &reg_ahci_5v {
 	status = "okay";
 };
 
-#include "axp209.dtsi"
-
-&reg_dcdc2 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1450000>;
-	regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
-	regulator-always-on;
-	regulator-min-microvolt = <1000000>;
-	regulator-max-microvolt = <1400000>;
-	regulator-name = "vdd-int-dll";
-};
-
-&reg_ldo1 {
-	regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
-	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "avcc";
-};
-
-&reg_usb1_vbus {
-	status = "okay";
-};
-
-&reg_usb2_vbus {
-	status = "okay";
-};
-
 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins_a>,
 		    <&spi0_cs0_pins_a>;
 	status = "okay";
 };
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&usbphy {
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index dc2f2aeaff07..7afc7a64eef1 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -156,6 +156,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	emac_power_pin_q5: emac_power_pin@0 {
 		allwinner,pins = "PH19";
@@ -172,6 +176,11 @@
 	};
 };
 
+&reg_usb0_vbus {
+	regulator-boot-on;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -186,7 +195,13 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 02158bcd64ee..8e50723dbe02 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -91,6 +91,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -154,6 +158,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_marsboard: led_pins@0 {
 		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
@@ -161,6 +169,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_usb1_vbus {
@@ -184,7 +199,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index 3c7eebe17088..ee46ea854832 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -44,6 +44,7 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "MK802";
@@ -58,6 +59,10 @@
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -80,7 +85,25 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
 		allwinner,pins = "PH12";
 		allwinner,function = "gpio_out";
@@ -89,6 +112,10 @@
 	};
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -105,7 +132,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 28e32ad705cd..b350448c7217 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -124,6 +124,18 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 4e3e1b9d8217..39034aa8e1ae 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -104,6 +104,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -129,12 +133,8 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupts = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
@@ -164,6 +164,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_pcduino: led_pins@0 {
 		allwinner,pins = "PH15", "PH16";
@@ -178,14 +182,40 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
-&reg_usb1_vbus {
-	status = "okay";
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
 };
 
-&reg_usb2_vbus {
-	status = "okay";
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
 };
 
 &uart0 {
@@ -194,8 +224,16 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
-	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+	usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
new file mode 100644
index 000000000000..de483a1bf36a
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The LinkSprite pcDuino2 board is almost identical to the older
+ * LinkSprite pcDuino1 board. The only software visible difference
+ * is that the pcDuino2 board got a USB VBUS voltage regulator, which
+ * is controlled by the PD2 pin (pulled-up by default). Also one of
+ * the USB host ports has been replaced with a USB WIFI chip.
+ */
+
+#include "sun4i-a10-pcduino.dts"
+
+/ {
+	model = "LinkSprite pcDuino2";
+	compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10";
+};
+
+&pio {
+	usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 {
+		allwinner,pins = "PD2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb2_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_vbus_pin_pcduino2>;
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc3v3>; /* USB WIFI is always on */
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
new file mode 100644
index 000000000000..918f97294b33
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -0,0 +1,260 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Point of View Protab2-IPS9";
+	compatible = "pov,protab2-ips9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin_protab>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	/* pull-ups and devices require AXP209 LDO3 */
+	status = "failed";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	pixcir_ts@5c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		attb-gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+		enable-gpios = <&pio 0 5 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&pio 1 13 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <768>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@400 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@800 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin_protab: bl_en_pin@0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	touchscreen_pins: touchscreen_pins@0 {
+		allwinner,pins = "PA5", "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 1f3c51a08113..2c8f5e6ad905 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -45,6 +45,7 @@
 
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -65,7 +66,7 @@
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>;
+				 <&ahb_gates 44>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -74,7 +75,8 @@
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>, <&ahb_gates 46>;
+				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -83,7 +85,8 @@
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
-				 <&ahb_gates 46>;
+				 <&ahb_gates 46>, <&dram_gates 25>,
+				 <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -92,7 +95,8 @@
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
 			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-				 <&ahb_gates 44>, <&ahb_gates 46>;
+				 <&ahb_gates 44>, <&ahb_gates 46>,
+				 <&dram_gates 25>, <&dram_gates 26>;
 			status = "disabled";
 		};
 	};
@@ -195,6 +199,15 @@
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-pll1-clk";
@@ -481,6 +494,48 @@
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
 			clock-output-names = "spi3";
 		};
+
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-dram-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>, <2>,
+					<3>,
+					<4>,
+					<5>, <6>,
+					<15>,
+					<24>, <25>,
+					<26>, <27>,
+					<28>, <29>;
+			clock-output-names = "dram_ve",
+					     "dram_csi0", "dram_csi1",
+					     "dram_ts",
+					     "dram_tvd",
+					     "dram_tve0", "dram_tve1",
+					     "dram_output",
+					     "dram_de_fe1", "dram_de_fe0",
+					     "dram_de_be0", "dram_de_be1",
+					     "dram_de_mp", "dram_ace";
+		};
+
+		ve_clk: clk@01c2013c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ve-clk";
+			reg = <0x01c2013c 0x4>;
+			clocks = <&pll4>;
+			clock-output-names = "ve";
+		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
 	};
 
 	soc@01c00000 {
@@ -1004,6 +1059,19 @@
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
new file mode 100644
index 000000000000..d4ad02182353
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Auxtek t003 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t003>;
+
+		red {
+			label = "t003-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_t003: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_t003: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG13";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PB10";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
index 2b3511ea2e5d..a790ec8adb75 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -86,6 +86,20 @@
 	status = "okay";
 };
 
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp152: pmic@30 {
+		compatible = "x-powers,axp152";
+		reg = <0x30>;
+		interrupts = <0>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 5a422c1ff725..86d046a502e6 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -111,7 +111,7 @@
 	status = "okay";
 
 	at24@50 {
-		compatible = "at,24c16";
+		compatible = "atmel,24c16";
 		pagesize = <16>;
 		reg = <0x50>;
 		read-only;
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
new file mode 100644
index 000000000000..9fea918f949e
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "A10s-Wobo i5";
+	compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_wobo_i5>;
+
+		blue {
+			label = "a10s-wobo-i5:blue:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_wobo>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_b>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	led_pins_wobo_i5: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	emac_power_pin_wobo: emac_power_pin@0 {
+		allwinner,pins = "PA02";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index a513b416a807..bddd0de88af6 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -77,6 +77,15 @@
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
 			status = "disabled";
 		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
@@ -156,6 +165,14 @@
 			#size-cells = <0>;
 		};
 
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun5i-a10s-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -195,13 +212,6 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	uart3_pins_a: uart3@0 {
-		allwinner,pins = "PG9", "PG10";
-		allwinner,function = "uart3";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-
 	emac_pins_a: emac0@0 {
 		allwinner,pins = "PA0", "PA1", "PA2",
 				"PA3", "PA4", "PA5", "PA6",
@@ -213,6 +223,17 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	emac_pins_b: emac0@1 {
+		allwinner,pins = "PD6", "PD7", "PD10",
+				"PD11", "PD12", "PD13", "PD14",
+				"PD15", "PD18", "PD19", "PD20",
+				"PD21", "PD22", "PD23", "PD24",
+				"PD25", "PD26", "PD27";
+		allwinner,function = "emac";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	mmc1_pins_a: mmc1@0 {
 		allwinner,pins = "PG3", "PG4", "PG5",
 				 "PG6", "PG7", "PG8";
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
new file mode 100644
index 000000000000..7fbb0b0558a9
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
@@ -0,0 +1,241 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Empire Electronix D709 tablet";
+	compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
new file mode 100644
index 000000000000..6fa54b661423
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
@@ -0,0 +1,227 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "INet-98V Rev 02";
+	compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb0_vbus_pin_a {
+	allwinner,pins = "PG12";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
new file mode 100644
index 000000000000..72e93acb5a9e
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A13 Tablet";
+	compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
index eb793d5a2bd6..fa9ddfdcfe96 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -47,11 +47,21 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Utoo P66";
 	compatible = "utoo,p66", "allwinner,sun5i-a13";
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		/* Note levels of 10 / 20% result in backlight off */
+		brightness-levels = <0 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <6>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
 	i2c_lcd: i2c@0 {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
@@ -63,6 +73,13 @@
 	};
 };
 
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -158,6 +175,13 @@
 };
 
 &pio {
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PG3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
 		allwinner,pins = "PG0";
 		allwinner,function = "gpio_in";
@@ -201,6 +225,12 @@
 	};
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index f3631c9c6fa2..d910d3a6c41c 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -150,6 +150,16 @@
 					     "apb1_uart3";
 		};
 	};
+
+	soc@01c00000 {
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun5i-a13-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+	};
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi
new file mode 100644
index 000000000000..a78e189f6653
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		/* TODO: backlight uses axp gpio1 as enable pin */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts
new file mode 100644
index 000000000000..f6898c6b84d4
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-r8-chip.dts
@@ -0,0 +1,222 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-r8.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NextThing C.H.I.P.";
+	compatible = "nextthing,chip", "allwinner,sun5i-r8";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+
+		/*
+		 * The interrupt is routed through the "External Fast
+		 * Interrupt Request" pin (ball G13 of the module)
+		 * directly to the main interrupt controller, without
+		 * any other controller interfering.
+		 */
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	xio: gpio@38 {
+		compatible = "nxp,pcf8574a";
+		reg = <0x38>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	chip_vbus_pin: chip_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	chip_id_det_pin: chip_id_det_pin@0 {
+		allwinner,pins = "PG2";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "cpuvdd";
+	regulator-always-on;
+};
+
+&reg_dcdc3 {
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "corevdd";
+	regulator-always-on;
+};
+
+&reg_ldo1 {
+	regulator-name = "rtcvdd";
+};
+
+&reg_ldo2 {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+	regulator-always-on;
+};
+
+&reg_ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-1v8";
+};
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&chip_vbus_pin>;
+	vin-supply = <&reg_vcc5v0>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>,
+		    <&uart3_pins_cts_rts_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&chip_id_det_pin>;
+	status = "okay";
+
+	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_vcc5v0>;
+};
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi
new file mode 100644
index 000000000000..0ef865601ac9
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-r8.dtsi
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2015 Free Electrons
+ * Copyright 2015 NextThing Co
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun5i-a13.dtsi"
+
+/ {
+	chosen {
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 78b993abbaa3..59a9426e3bd4 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -44,6 +44,7 @@
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -102,6 +103,15 @@
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-pll1-clk";
@@ -285,6 +295,14 @@
 			clock-output-names = "usb_ohci0", "usb_phy";
 		};
 
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun5i-a13-mbus-clk";
@@ -529,6 +547,27 @@
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
+
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PG9", "PG10";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_cts_rts_a: uart3-cts-rts@0 {
+				allwinner,pins = "PG11", "PG12";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm0_pins: pwm0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
 		};
 
 		timer@01c20c00 {
@@ -550,6 +589,19 @@
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun4i-a10-sid";
 			reg = <0x01c23800 0x10>;
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 0cf9926d1e93..f9cf36888d93 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -60,12 +60,34 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
+			<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+		i2c-gpio,delay-us = <5>;
+	};
 };
 
 &ehci1 {
 	status = "okay";
 };
 
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -82,6 +104,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+	};
 };
 
 &mmc0 {
@@ -112,6 +141,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		allwinner,pins = "PA23", "PA24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_usb2_vbus {
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index d0cfadac0691..9a74637f677f 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -54,6 +54,8 @@
 	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
 
 	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
 		serial0 = &uart0;
 	};
 
@@ -67,13 +69,17 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
 	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
@@ -119,7 +125,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-	vmmc-supply = <&vcc_3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
 	cd-inverted;
@@ -134,7 +140,7 @@
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
-	vmmc-supply = <&vcc_wifi>;
+	vmmc-supply = <&reg_aldo1>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;
 	non-removable;
@@ -146,6 +152,13 @@
 };
 
 &pio {
+	gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
+		allwinner,pins = "PA21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
 		allwinner,pins = "PA8";
 		allwinner,function = "gpio_in";
@@ -164,70 +177,69 @@
 &p2wi {
 	status = "okay";
 
-	axp221: pmic@68 {
+	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		dcdc1-supply = <&vcc_3v0>;
-		dcdc5-supply = <&vcc_dram>;
-
-		regulators {
-			x-powers,dcdc-freq = <3000>;
-
-			vcc_3v0: dcdc1 {
-				regulator-always-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "vcc-3v0";
-			};
-
-			vdd_cpu: dcdc2 {
-				regulator-always-on;
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1320000>;
-				regulator-name = "vdd-cpu";
-			};
-
-			vdd_gpu: dcdc3 {
-				regulator-always-on;
-				regulator-min-microvolt = <700000>;
-				regulator-max-microvolt = <1320000>;
-				regulator-name = "vdd-gpu";
-			};
-
-			vdd_sys_dll: dcdc4 {
-				regulator-always-on;
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-name = "vdd-sys-dll";
-			};
-
-			vcc_dram: dcdc5 {
-				regulator-always-on;
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-name = "vcc-dram";
-			};
-
-			vcc_wifi: aldo1 {
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_wifi";
-			};
-
-			avcc: aldo3 {
-				regulator-always-on;
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-name = "avcc";
-			};
-		};
 	};
 };
 
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
 &reg_usb1_vbus {
 	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 54bb83b58f42..1867af24ff52 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -61,7 +61,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@0 {
+		simplefb_hdmi: framebuffer@0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -69,7 +69,7 @@
 			status = "disabled";
 		};
 
-		framebuffer@1 {
+		simplefb_lcd: framebuffer@1 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -691,6 +691,34 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc2_8bit_emmc_pins: mmc2@1 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc3_8bit_emmc_pins: mmc3@1 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15",
+						 "PC24";
+				allwinner,function = "mmc3";
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			gmac_pins_mii_a: gmac_mii@0 {
 				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
 						"PA8", "PA9", "PA11",
@@ -768,6 +796,13 @@
 			reg = <0x01c20ca0 0x20>;
 		};
 
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		rtp: rtp@01c25000 {
 			compatible = "allwinner,sun6i-a31-ts";
 			reg = <0x01c25000 0x100>;
@@ -1085,7 +1120,7 @@
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
new file mode 100644
index 000000000000..68b479b8772c
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -0,0 +1,256 @@
+/*
+ * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>
+ * Copyright 2015 Karsten Merker <merker@debian.org>
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "MSI Primo81 tablet";
+	compatible = "msi,primo81", "allwinner,sun6i-a31s";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	/* rtl8188etv wifi is connected here */
+	status = "okay";
+};
+
+&i2c0 {
+	/* pull-ups and device VDDIO use AXP221 DLDO3 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "failed";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	ctp@5d {
+		pinctrl-names = "default";
+		pinctrl-0 = <&gt911_int_primo81>;
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */
+		touchscreen-swapped-x-y;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	accelerometer@1c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mma8452_int_primo81>;
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+		interrupt-parent = <&pio>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
+		#io-channel-cells = <1>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	gt911_int_primo81: gt911_int_pin@0 {
+		allwinner,pins = "PA3";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mma8452_int_primo81: mma8452_int_pin@0 {
+		allwinner,pins = "PA9";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1080000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-mipi-bridge";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+	vdd-mipi-bridge-supply = <&reg_eldo3>;
+};
+
+&usb_otg {
+	/* otg support requires support for AXP221 usb-power-supply and GPIO */
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
new file mode 100644
index 000000000000..4ec0c8679b2e
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Sinlinx SinA31s Core Board";
+	compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+/* eMMC on core board */
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_8bit_emmc_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+/* AXP221s PMIC on core board */
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+/* UART0 pads available on core board */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
new file mode 100644
index 000000000000..6ead2f5c847a
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* The SinA31s development board has the SinA31s core board soldered on */
+#include "sun6i-a31s-sina31s-core.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Sinlinx SinA31s Development Board";
+	compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_sina31s>;
+
+		status {
+			label = "sina31s:status:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
+		};
+	};
+};
+
+&ehci0 {
+	/* USB 2.0 4 port hub IC */
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button@158 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pin_sina31s: led_pin@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
+		allwinner,pins = "PA4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-gmac-phy";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 000000000000..db7fa13f5425
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bpi_m2>;
+
+		blue {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		green {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		red {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: mmc2_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v0>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
+		allwinner,pins = "PA21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bpi_m2: led_pins@0 {
+		allwinner,pins = "PG5", "PG10", "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
+		allwinner,pins = "PA4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_pio {
+	mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
+		allwinner,pins = "PL8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
new file mode 100644
index 000000000000..360adfb1e9ca
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -0,0 +1,205 @@
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Yones TopTech BS1078 v2 Tablet";
+	compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd-usb2";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&reg_dc5ldo {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+/* Voltage source for I2C pullup resistors for I2C Bus 0 */
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vddio-csi";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_dldo1>;
+	usb2_vbus-supply = <&reg_dc1sw>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 9f7b472e6725..67c8a7644b99 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -92,6 +92,24 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	operating-points = <
+		/* kHz	  uV */
+		960000	1400000
+		912000	1400000
+		864000	1350000
+		720000	1250000
+		528000	1150000
+		312000	1100000
+		144000	1050000
+		>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -119,13 +137,9 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
@@ -159,7 +173,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
@@ -182,6 +207,37 @@
 	};
 };
 
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -216,7 +272,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index 39a51d5143f7..1fa832d7b469 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -84,6 +84,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -150,6 +154,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_cubieboard2: led_pins@0 {
 		allwinner,pins = "PH20", "PH21";
@@ -157,12 +165,24 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 #include "axp209.dtsi"
 
 &reg_dcdc2 {
@@ -205,6 +225,9 @@
 };
 
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index e6b019232a9e..8da939ab8350 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -101,6 +101,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
new file mode 100644
index 000000000000..f5b5325a70e2
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2015 Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "ICnova-A20 SWAC";
+	compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
new file mode 100644
index 000000000000..661c21d9bdbd
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-itead-core-common.dtsi"
+
+/ {
+	model = "Itead Ibox A20";
+	compatible = "itead,itead-ibox-a20", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_itead_core>;
+
+		green {
+			label = "itead_core:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		blue {
+			label = "itead_core:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	axp209: pmic@34 {
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_itead_core: led_pins@0 {
+		allwinner,pins = "PH20","PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
new file mode 100644
index 000000000000..5ee43d8bf174
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Lamobo R1";
+	compatible = "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_lamobo_r1>;
+
+		green {
+			label = "lamobo_r1:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_lamobo_r1>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci_pwr_pin_a {
+	allwinner,pins = "PB3";
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	gmac_power_pin_lamobo_r1: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_lamobo_r1: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_ahci_5v {
+	gpio = <&pio 1 3 0>; /* PB3 */
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>,
+		    <&spi0_cs1_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
index 4f432f8ade77..90ff4a267025 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -53,6 +53,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	model = "mk808c";
@@ -68,6 +69,10 @@
 	};
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -121,6 +126,30 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -141,7 +170,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
new file mode 100644
index 000000000000..23aacce4d6c7
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
@@ -0,0 +1,307 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ * Copyright 2015 - Karsten Merker <merker@debian.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-Olimex-SOM-EVB";
+	compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olimex_som_evb>;
+
+		green {
+			label = "a20-olimex-som-evb:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button@600 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+
+	button@800 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@980 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <980000>;
+	};
+
+	button@1180 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1180000>;
+	};
+
+	button@1400 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_olimex_som_evb: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
+		allwinner,pins = "PH0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 04237085dc39..35ad7006c53c 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -117,6 +117,18 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 8acff78272b7..d5c796c8d16f 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -170,6 +170,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &mmc0 {
@@ -190,6 +196,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
 		allwinner,pins = "PC3";
@@ -204,6 +214,27 @@
 		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+	};
+
+	usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
+		allwinner,pins = "PC17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &reg_ahci_5v {
@@ -212,6 +243,12 @@
 	status = "okay";
 };
 
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_lime2>;
+	gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -226,7 +263,17 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index c5d70caade82..7e3006f6a775 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -125,6 +125,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
 };
 
 &i2c2 {
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
index 73cd81ee02e3..2be04c438b1e 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -95,6 +95,10 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -156,7 +160,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
@@ -225,6 +240,10 @@
 	regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@@ -243,7 +262,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
index 55a06ceb80ec..71125bf64575 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -141,7 +141,18 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
 		allwinner,pins = "PH10";
 		allwinner,function = "gpio_in";
@@ -203,6 +214,10 @@
 	regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
 	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
@@ -221,7 +236,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
index 5361fce26b45..ddac7328b852 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -82,6 +82,14 @@
 	status = "okay";
 };
 
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -108,13 +116,9 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
@@ -142,6 +146,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
 		allwinner,pins = "PH2";
@@ -157,8 +165,15 @@
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
 	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
-		allwinner,pins = "PH11";
+		allwinner,pins = "PD2";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -171,13 +186,37 @@
 	status = "okay";
 };
 
-&reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
-	gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-	status = "okay";
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
 };
 
-&reg_usb2_vbus {
+/* A single regulator (U24) powers both USB host ports. */
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+	gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
 	status = "okay";
 };
 
@@ -187,8 +226,16 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
-	usb2_vbus-supply = <&reg_usb2_vbus>;
+	usb2_vbus-supply = <&reg_usb1_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index afc9ecebed21..1a8b39be1d61 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -111,6 +111,14 @@
 	allwinner,pins = "PH2";
 };
 
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -137,16 +145,14 @@
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp209";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
 	};
 };
 
+#include "axp209.dtsi"
+
 &ir0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir0_rx_pins_a>;
@@ -171,6 +177,10 @@
 	status = "okay";
 };
 
+&otg_sram {
+	status = "okay";
+};
+
 &pio {
 	led_pins_pcduino3: led_pins@0 {
 		allwinner,pins = "PH15", "PH16";
@@ -185,6 +195,13 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
 };
 
 &reg_ahci_5v {
@@ -192,6 +209,31 @@
 	status = "okay";
 };
 
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -206,7 +248,15 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
index 83c6d3f872ff..2f6b21adddd9 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -48,6 +48,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	model = "Wexler TAB7200";
@@ -57,11 +58,28 @@
 		serial0 = &uart0;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_enable_pin>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 };
 
+&codec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&codec_pa_pin>;
+	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
@@ -86,6 +104,8 @@
 	};
 };
 
+#include "axp209.dtsi"
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins_a>;
@@ -96,6 +116,18 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
+
+	gt911: touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_reset_pin>;
+		irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */
+		reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */
+		touchscreen-swapped-x-y;
+	};
 };
 
 &lradc {
@@ -135,7 +167,45 @@
 	status = "okay";
 };
 
-#include "axp209.dtsi"
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	bl_enable_pin: bl_enable_pin@0 {
+		allwinner,pins = "PH7";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	codec_pa_pin: codec_pa_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	ts_reset_pin: ts_reset_pin@0 {
+		allwinner,pins = "PB13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
 
 &reg_dcdc2 {
 	regulator-always-on;
@@ -162,6 +232,10 @@
 	regulator-name = "avcc";
 };
 
+&reg_usb0_vbus {
+	status = "okay";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
@@ -176,7 +250,21 @@
 	status = "okay";
 };
 
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
 &usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
new file mode 100644
index 000000000000..dc31d476ef81
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wits Pro A20 DKT";
+	compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	mmc3_pwrseq: mmc3_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
+		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_detect_pin>;
+	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 391230c3dc93..0940a788f824 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
 
+#include <dt-bindings/clock/sun4i-a10-pll2.h>
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -67,7 +68,7 @@
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
-				 <&ahb_gates 44>;
+				 <&ahb_gates 44>, <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -75,7 +76,8 @@
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+				 <&dram_gates 26>;
 			status = "disabled";
 		};
 
@@ -84,7 +86,7 @@
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-tve0";
 			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
-				 <&ahb_gates 44>;
+				 <&ahb_gates 44>, <&dram_gates 26>;
 			status = "disabled";
 		};
 	};
@@ -199,6 +201,15 @@
 			clock-output-names = "pll1";
 		};
 
+		pll2: clk@01c20008 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll2-clk";
+			reg = <0x01c20008 0x8>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll2-1x", "pll2-2x",
+					     "pll2-4x", "pll2-8x";
+		};
+
 		pll4: clk@01c20018 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun7i-a20-pll4-clk";
@@ -465,6 +476,14 @@
 			clock-output-names = "ir1";
 		};
 
+		keypad_clk: clk@01c200c4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200c4 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "keypad";
+		};
+
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -483,6 +502,48 @@
 			clock-output-names = "spi3";
 		};
 
+		dram_gates: clk@01c20100 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-dram-gates-clk";
+			reg = <0x01c20100 0x4>;
+			clocks = <&pll5 0>;
+			clock-indices = <0>,
+					<1>, <2>,
+					<3>,
+					<4>,
+					<5>, <6>,
+					<15>,
+					<24>, <25>,
+					<26>, <27>,
+					<28>, <29>;
+			clock-output-names = "dram_ve",
+					     "dram_csi0", "dram_csi1",
+					     "dram_ts",
+					     "dram_tvd",
+					     "dram_tve0", "dram_tve1",
+					     "dram_output",
+					     "dram_de_fe1", "dram_de_fe0",
+					     "dram_de_be0", "dram_de_be1",
+					     "dram_de_mp", "dram_ace";
+		};
+
+		ve_clk: clk@01c2013c {
+			#clock-cells = <0>;
+			#reset-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ve-clk";
+			reg = <0x01c2013c 0x4>;
+			clocks = <&pll4>;
+			clock-output-names = "ve";
+		};
+
+		codec_clk: clk@01c20140 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec-clk";
+			reg = <0x01c20140 0x4>;
+			clocks = <&pll2 SUN4I_A10_PLL2_1X>;
+			clock-output-names = "codec";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun5i-a13-mbus-clk";
@@ -1190,6 +1251,19 @@
 			status = "disabled";
 		};
 
+		codec: codec@01c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun7i-a20-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>, <&codec_clk>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		sid: eeprom@01c23800 {
 			compatible = "allwinner,sun7i-a20-sid";
 			reg = <0x01c23800 0x200>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 27a925ec17d2..7e05e09e61c7 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -56,7 +56,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		framebuffer@0 {
+		simplefb_lcd: framebuffer@0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
@@ -175,31 +175,6 @@
 			clock-output-names = "apb1";
 		};
 
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-indices = <1>, <6>,
-					<8>, <9>, <10>,
-					<13>, <14>,
-					<19>, <20>,
-					<21>, <24>, <26>,
-					<29>, <32>, <36>,
-					<40>, <44>, <46>,
-					<52>, <54>,
-					<57>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_spinlock",
-					"ahb1_drc";
-		};
-
 		apb1_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
@@ -406,12 +381,19 @@
 				allwinner,pins = "PC5", "PC6", "PC8",
 						 "PC9", "PC10", "PC11",
 						 "PC12", "PC13", "PC14",
-						 "PC15";
+						 "PC15", "PC16";
 				allwinner,function = "mmc2";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			pwm0_pins: pwm0 {
+				allwinner,pins = "PH0";
+				allwinner,function = "pwm0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PH2", "PH3";
 				allwinner,function = "i2c0";
@@ -466,6 +448,14 @@
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pwm: pwm@01c21400 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		lradc: lradc@01c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
@@ -589,6 +579,14 @@
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		nmi_intc: interrupt-controller@01f00c0c {
+			compatible = "allwinner,sun6i-a31-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c0c 0x38>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		prcm@01f01400 {
 			compatible = "allwinner,sun8i-a23-prcm";
 			reg = <0x01f01400 0x200>;
@@ -657,10 +655,18 @@
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
 			r_uart_pins_a: r_uart@0 {
 				allwinner,pins = "PL2", "PL3";
 				allwinner,function = "s_uart";
@@ -668,5 +674,19 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
+
+		r_rsb: rsb@01f03400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
new file mode 100644
index 000000000000..1aeb06c649b9
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner GT90H Quad Core Tablet (v4)";
+	compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
+	/* FIXME this really is aldo1, correct once we've pmic support */
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
index 382d64c3b78e..c2f22fc33811 100644..120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
@@ -1,54 +1 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
- * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
- * and it uses different camera sensors.
- */
-
-#include "sun8i-a23-ippo-q8h-v5.dts"
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v1.2)";
-	compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
-};
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
index 8d9da6886a4c..c2f22fc33811 100644..120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -1,136 +1 @@
-/*
- * Copyright 2014 Chen-Yu Tsai
- *
- * Chen-Yu Tsai <wens@csie.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "Ippo Q8H Dual Core Tablet (v5)";
-	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	/* pull-ups and devices require PMIC regulator */
-	status = "failed";
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
+sun8i-a23-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
new file mode 100644
index 000000000000..6062ea7a9903
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A23 Tablet";
+	compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 2cc27c7a59dc..92e6616979ea 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -50,6 +50,31 @@
 	};
 
 	clocks {
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-indices = <1>, <6>,
+					<8>, <9>, <10>,
+					<13>, <14>,
+					<19>, <20>,
+					<21>, <24>, <26>,
+					<29>, <32>, <36>,
+					<40>, <44>, <46>,
+					<52>, <53>,
+					<54>, <57>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+					"ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_msgbox",
+					"ahb1_spinlock", "ahb1_drc";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun8i-a23-mbus-clk";
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
index 19db844863bb..4519fd791a8f 100644..120000
--- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
+++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
@@ -1,88 +1 @@
-/*
- * Copyright 2015 Vishnu Patekar
- * Vishnu Patekar <vishnupatekar0510@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "ET Q8 Quad Core Tablet (v1.6)";
-	compatible = "et,q8-v1.6", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
index a43897515fb6..4519fd791a8f 100644..120000
--- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
@@ -1,133 +1 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
-	model = "Ippo Q8H Quad Core Tablet (v1.2)";
-	compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33";
-
-	aliases {
-		serial0 = &r_uart;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
-	status = "okay";
-};
-
-&lradc {
-	vref-supply = <&reg_vcc3v0>;
-	status = "okay";
-
-	button@200 {
-		label = "Volume Up";
-		linux,code = <KEY_VOLUMEUP>;
-		channel = <0>;
-		voltage = <200000>;
-	};
-
-	button@400 {
-		label = "Volume Down";
-		linux,code = <KEY_VOLUMEDOWN>;
-		channel = <0>;
-		voltage = <400000>;
-	};
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-	vmmc-supply = <&reg_vcc3v0>;
-	bus-width = <4>;
-	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-	cd-inverted;
-	status = "okay";
-};
-
-&pio {
-	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-		allwinner,pins = "PB4";
-		allwinner,function = "gpio_in";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-	};
-};
-
-&r_uart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&r_uart_pins_a>;
-	status = "okay";
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
new file mode 100644
index 000000000000..44b32296a025
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+	model = "Q8 A33 Tablet";
+	compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
index 1d5390d4e03a..fef6abc0a703 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -68,7 +68,7 @@
 };
 
 &lradc {
-	vref-supply = <&reg_vcc3v0>;
+	vref-supply = <&reg_dcdc1>;
 	status = "okay";
 
 	button@200 {
@@ -96,7 +96,7 @@
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
 	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
 	cd-inverted;
@@ -106,13 +106,16 @@
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <8>;
 	non-removable;
+	cap-mmc-hw-reset;
 	status = "okay";
 };
 
 &mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
 	/* eMMC is missing pull-ups */
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
@@ -130,6 +133,80 @@
 	};
 };
 
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_b>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index faa7d3c1fcea..001d8402ca18 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -72,6 +72,41 @@
 			clock-output-names = "pll11";
 		};
 
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-indices = <1>, <5>,
+				        <6>, <8>, <9>,
+				        <10>, <13>, <14>,
+					<19>, <20>,
+					<21>, <24>, <26>,
+					<29>, <32>, <36>,
+					<40>, <44>, <46>,
+					<52>, <53>,
+					<54>, <57>,
+					<58>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_msgbox",
+					"ahb1_spinlock", "ahb1_drc",
+					"ahb1_sat";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "ss";
+		};
+
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun8i-a23-mbus-clk";
@@ -82,6 +117,16 @@
 	};
 
 	soc@01c00000 {
+		crypto: crypto-engine@01c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 5>, <&ss_clk>;
+			clock-names = "ahb", "mod";
+			resets = <&ahb1_rst 5>;
+			reset-names = "ahb";
+		};
+
 		usb_otg: usb@01c19000 {
 			compatible = "allwinner,sun8i-a33-musb";
 			reg = <0x01c19000 0x0400>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
new file mode 100644
index 000000000000..342e1d33fa1c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Allwinner A83T H8Homlet Proto Dev Board v2.0";
+	compatible = "allwinner,h8homlet-v2", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 000000000000..88b1e0970b8d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,65 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
new file mode 100644
index 000000000000..d3473f81b12f
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ *
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+
+		cpu@100 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x100>;
+		};
+
+		cpu@101 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x101>;
+		};
+
+		cpu@102 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x102>;
+		};
+
+		cpu@103 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x103>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* TODO: PRCM block has a mux for this. */
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		/*
+		 * This is called "internal OSC" in some places.
+		 * It is an internal RC-based oscillator.
+		 * TODO: Its controls are in the PRCM block.
+		 */
+		osc16M: osc16M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <16000000>;
+			clock-output-names = "osc16M";
+		};
+
+		osc16Md512: osc16Md512_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <512>;
+			clock-mult = <1>;
+			clocks = <&osc16M>;
+			clock-output-names = "osc16M-d512";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c20800 0x400>;
+			clocks = <&osc24M>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PB9", "PB10";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
new file mode 100644
index 000000000000..79f40c3e6101
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Xunlong Orange Pi Plus";
+	compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
+
+		status_led {
+			label = "orangepi-plus:red:status";
+			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		pwr_led {
+			label = "orangepi-plus:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "sw4";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_opc>;
+
+		sw4@0 {
+			label = "sw4";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pio {
+	leds_opc: led_pins@0 {
+		allwinner,pins = "PA15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_pio {
+	leds_r_opc: led_pins@0 {
+		allwinner,pins = "PL10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	sw_r_opc: key_pins@0 {
+		allwinner,pins = "PL03";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
new file mode 100644
index 000000000000..dadb7f60c062
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -0,0 +1,559 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		/* dummy clock until actually implemented */
+		pll5: pll5_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			clock-output-names = "pll5";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
+		};
+
+		pll6d2: pll6d2_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll6 0>;
+			clock-output-names = "pll6d2";
+		};
+
+		/* dummy clock until pll6 can be reused */
+		pll8: pll8_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1>;
+			clock-output-names = "pll8";
+		};
+
+		cpu: cpu_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1: ahb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+			clock-output-names = "ahb1";
+		};
+
+		ahb2: ahb2_clk@01c2005c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-h3-ahb2-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&ahb1>, <&pll6d2>;
+			clock-output-names = "ahb2";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		apb2: apb2_clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+			clock-output-names = "apb2";
+		};
+
+		bus_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-h3-bus-gates-clk";
+			reg = <0x01c20060 0x14>;
+			clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
+			clock-names = "ahb1", "ahb2", "apb1", "apb2";
+			clock-indices = <5>, <6>, <8>,
+					<9>, <10>, <13>,
+					<14>, <17>, <18>,
+					<19>, <20>,
+					<21>, <23>,
+					<24>, <25>,
+					<26>, <27>,
+					<28>, <29>,
+					<30>, <31>, <32>,
+					<35>, <36>, <37>,
+					<40>, <41>, <43>,
+					<44>, <52>, <53>,
+					<54>, <64>,
+					<65>, <69>, <72>,
+					<76>, <77>, <78>,
+					<96>, <97>, <98>,
+					<112>, <113>,
+					<114>, <115>,
+					<116>, <128>, <135>;
+			clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
+					     "bus_mmc1", "bus_mmc2", "bus_nand",
+					     "bus_sdram", "bus_gmac", "bus_ts",
+					     "bus_hstimer", "bus_spi0",
+					     "bus_spi1", "bus_otg",
+					     "bus_otg_ehci0", "bus_ehci1",
+					     "bus_ehci2", "bus_ehci3",
+					     "bus_otg_ohci0", "bus_ohci1",
+					     "bus_ohci2", "bus_ohci3", "bus_ve",
+					     "bus_lcd0", "bus_lcd1", "bus_deint",
+					     "bus_csi", "bus_tve", "bus_hdmi",
+					     "bus_de", "bus_gpu", "bus_msgbox",
+					     "bus_spinlock", "bus_codec",
+					     "bus_spdif", "bus_pio", "bus_ths",
+					     "bus_i2s0", "bus_i2s1", "bus_i2s2",
+					     "bus_i2c0", "bus_i2c1", "bus_i2c2",
+					     "bus_uart0", "bus_uart1",
+					     "bus_uart2", "bus_uart3",
+					     "bus_scr", "bus_ephy", "bus_dbg";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 0>, <&pll8>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+			clock-output-names = "mbus";
+		};
+
+		apb0: apb0_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01f01428 {
+			compatible = "allwinner,sun8i-h3-apb0-gates-clk",
+				     "allwinner,sun4i-a10-gates-clk";
+			reg = <0x01f01428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apb0>;
+			clock-indices = <0>, <1>;
+			clock-output-names = "apb0_pio", "apb0_ir";
+		};
+
+		ir_clk: ir_clk@01f01454 {
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01f01454 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "ir";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun8i-h3-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bus_gates 6>;
+			resets = <&ahb_rst 6>;
+			#dma-cells = <1>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&bus_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_rst 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&bus_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_rst 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&bus_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb_rst 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-h3-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bus_gates 69>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PA4", "PA5";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_cd_pin: mmc0_cd_pin@0 {
+				allwinner,pins = "PF6";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ahb_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 112>;
+			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 113>;
+			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 114>;
+			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&bus_gates 115>;
+			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apb0_reset: reset@01f014b0 {
+			reg = <0x01f014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		ir: ir@01f02000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_reset 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun8i-h3-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_reset 0>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ir_pins_a: ir@0 {
+				allwinner,pins = "PL11";
+				allwinner,function = "s_cir_rx";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi
new file mode 100644
index 000000000000..9d2b7e2f5975
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en_pin_q8>;
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	bl_en_pin_q8: bl_en_pin@0 {
+		allwinner,pins = "PH6";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
+
+&simplefb_lcd {
+	vcc-lcd-supply = <&reg_dc1sw>;
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 6484dcf69873..eb2ccd0a3bd5 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -62,9 +62,31 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard4>;
+
+		green {
+			label = "cubieboard4:green:usr";
+			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
+		};
+
+		red {
+			label = "cubieboard4:red:usr";
+			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		};
+	};
 };
 
 &pio {
+	led_pins_cubieboard4: led-pins@0 {
+		allwinner,pins = "PH6", "PH17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
 	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
 		allwinner,pins = "PH18";
 		allwinner,function = "gpio_in";
@@ -89,6 +111,20 @@
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <8>;
 	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index 6ce4b5e8b615..d7a20d92b114 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -65,7 +65,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_optimus>;
+		pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
 
 		/* The LED names match those found on the board */
 
@@ -74,7 +74,10 @@
 			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		/* led3 is on PM15, in R_PIO */
+		led3 {
+			label = "optimus:led3:usr";
+			gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */
+		};
 
 		led4 {
 			label = "optimus:led4:usr";
@@ -106,17 +109,6 @@
 	status = "okay";
 };
 
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_a>;
-	status = "okay";
-};
-
-&i2c3_pins_a {
-	/* Enable internal pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-};
-
 &ohci0 {
 	status = "okay";
 };
@@ -171,30 +163,42 @@
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <8>;
 	non-removable;
+	cap-mmc-hw-reset;
 	status = "okay";
 };
 
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+};
+
 &reg_usb1_vbus {
 	pinctrl-0 = <&usb1_vbus_pin_optimus>;
 	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
 	status = "okay";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+&r_ir {
 	status = "okay";
 };
 
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
+&r_pio {
+	led_r_pins_optimus: led-pins@1 {
+		allwinner,pins = "PM15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&r_rsb {
 	status = "okay";
 };
 
-&uart4_pins_a {
-	/* Enable internal pull-up */
-	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
 };
 
 &usbphy1 {
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 5908e3dcf965..f68b3242b33a 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -128,6 +128,17 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		/*
+		 * This clock is actually configurable from the PRCM address
+		 * space. The external 24M oscillator can be turned off, and
+		 * the clock switched to an internal 16M RC oscillator. Under
+		 * normal operation there's no reason to do this, and the
+		 * default is to use the external good one, so just model this
+		 * as a fixed clock. Also it is not entirely clear if the
+		 * osc24M mux in the PRCM affects the entire clock tree, which
+		 * would also throw all the PLL clock rates off, or just the
+		 * downstream clocks in the PRCM.
+		 */
 		osc24M: osc24M_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -135,6 +146,13 @@
 			clock-output-names = "osc24M";
 		};
 
+		/*
+		 * The 32k clock is from an external source, normally the
+		 * AC100 codec/RTC chip. This clock is by default enabled
+		 * and clocked at 32768 Hz, from the oscillator connected
+		 * to the AC100. It is configurable, but no such driver or
+		 * bindings exist yet.
+		 */
 		osc32k: osc32k_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -164,6 +182,14 @@
 					     "usb_phy2", "usb_hsic_12M";
 		};
 
+		pll3: clk@06000008 {
+			/* placeholder until implemented */
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-rate = <0>;
+			clock-output-names = "pll3";
+		};
+
 		pll4: clk@0600000c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun9i-a80-pll4-clk";
@@ -350,6 +376,68 @@
 					"apb1_uart2", "apb1_uart3",
 					"apb1_uart4", "apb1_uart5";
 		};
+
+		cpus_clk: clk@08001410 {
+			compatible = "allwinner,sun9i-a80-cpus-clk";
+			reg = <0x08001410 0x4>;
+			#clock-cells = <0>;
+			clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+			clock-output-names = "cpus";
+		};
+
+		ahbs: ahbs_clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&cpus_clk>;
+			clock-output-names = "ahbs";
+		};
+
+		apbs: clk@0800141c {
+			compatible = "allwinner,sun8i-a23-apb0-clk";
+			reg = <0x0800141c 0x4>;
+			#clock-cells = <0>;
+			clocks = <&ahbs>;
+			clock-output-names = "apbs";
+		};
+
+		apbs_gates: clk@08001428 {
+			compatible = "allwinner,sun9i-a80-apbs-gates-clk";
+			reg = <0x08001428 0x4>;
+			#clock-cells = <1>;
+			clocks = <&apbs>;
+			clock-indices = <0>, <1>,
+					<2>, <3>,
+					<4>, <5>,
+					<6>, <7>,
+					<12>, <13>,
+					<16>, <17>,
+					<18>, <20>;
+			clock-output-names = "apbs_pio", "apbs_ir",
+					"apbs_timer", "apbs_rsb",
+					"apbs_uart", "apbs_1wire",
+					"apbs_i2c0", "apbs_i2c1",
+					"apbs_ps2_0", "apbs_ps2_1",
+					"apbs_dma", "apbs_i2s0",
+					"apbs_i2s1", "apbs_twd";
+		};
+
+		r_1wire_clk: clk@08001450 {
+			reg = <0x08001450 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_1wire";
+		};
+
+		r_ir_clk: clk@08001454 {
+			reg = <0x08001454 0x4>;
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			clocks = <&osc32k>, <&osc24M>;
+			clock-output-names = "r_ir";
+		};
 	};
 
 	soc {
@@ -455,7 +543,7 @@
 		};
 
 		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
 				 <&mmc0_clk 1>, <&mmc0_clk 2>;
@@ -469,7 +557,7 @@
 		};
 
 		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
 				 <&mmc1_clk 1>, <&mmc1_clk 2>;
@@ -483,7 +571,7 @@
 		};
 
 		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
 				 <&mmc2_clk 1>, <&mmc2_clk 2>;
@@ -497,7 +585,7 @@
 		};
 
 		mmc3: mmc@01c12000 {
-			compatible = "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c12000 0x1000>;
 			clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
 				 <&mmc3_clk 1>, <&mmc3_clk 2>;
@@ -594,7 +682,7 @@
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;
 
@@ -616,7 +704,8 @@
 			mmc2_8bit_pins: mmc2_8bit {
 				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
 						 "PC10", "PC11", "PC12",
-						 "PC13", "PC14", "PC15";
+						 "PC13", "PC14", "PC15",
+						 "PC16";
 				allwinner,function = "mmc2";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -764,14 +853,83 @@
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		apbs_rst: reset@080014b0 {
+			reg = <0x080014b0 0x4>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			#reset-cells = <1>;
+		};
+
+		nmi_intc: interrupt-controller@080015a0 {
+			compatible = "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x080015a0 0xc>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_ir: ir@08002000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_ir_pins>;
+			clocks = <&apbs_gates 1>, <&r_ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apbs_rst 1>;
+			reg = <0x08002000 0x40>;
+			status = "disabled";
+		};
+
 		r_uart: serial@08002800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x08002800 0x400>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&apbs_gates 4>;
+			resets = <&apbs_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@08002c00 {
+			compatible = "allwinner,sun9i-a80-r-pinctrl";
+			reg = <0x08002c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 0>;
+			resets = <&apbs_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			r_ir_pins: r_ir {
+				allwinner,pins = "PL6";
+				allwinner,function = "s_cir_rx";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			r_rsb_pins: r_rsb {
+				allwinner,pins = "PN0", "PN1";
+				allwinner,function = "s_rsb";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		r_rsb: i2c@08003400 {
+			compatible = "allwinner,sun8i-a23-rsb";
+			reg = <0x08003400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apbs_gates 3>;
+			clock-frequency = <3000000>;
+			resets = <&apbs_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
new file mode 100644
index 000000000000..2565d5137a17
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-q8-common.dtsi b/arch/arm/boot/dts/sunxi-q8-common.dtsi
new file mode 100644
index 000000000000..b8241462fcea
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-q8-common.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
new file mode 100644
index 000000000000..ef665d21d317
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-common.dtsi
@@ -0,0 +1,130 @@
+/*
+ * Based on Mans Rullgard's Tango3 DT
+ * https://github.com/mansr/linux-tangox
+ */
+
+#define CPU_CLK 0
+#define SYS_CLK 1
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	periph_clk: periph_clk {
+		compatible = "fixed-factor-clock";
+		clocks = <&clkgen CPU_CLK>;
+		clock-mult = <1>;
+		clock-div  = <2>;
+		#clock-cells = <0>;
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x20000000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@0 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x0 0x100>;
+		};
+
+		twd@600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x600 0x10>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+			always-on;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>, <0x100 0x100>;
+		};
+	};
+
+	l2cc: l2-cache-controller@20100000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x20100000 0x1000>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&irq0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		xtal: xtal {
+			compatible = "fixed-clock";
+			clock-frequency = <27000000>;
+			#clock-cells = <0>;
+		};
+
+		clkgen: clkgen@10000 {
+			compatible = "sigma,tango4-clkgen";
+			reg = <0x10000 0x40>;
+			clocks = <&xtal>;
+			#clock-cells = <1>;
+		};
+
+		tick-counter@10048 {
+			compatible = "sigma,tick-counter";
+			reg = <0x10048 0x4>;
+			clocks = <&xtal>;
+		};
+
+		uart: serial@10700 {
+			compatible = "ralink,rt2880-uart";
+			reg = <0x10700 0x30>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <7372800>;
+			reg-shift = <2>;
+		};
+
+		eth0: ethernet@26000 {
+			compatible = "sigma,smp8734-ethernet";
+			reg = <0x26000 0x800>;
+			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkgen SYS_CLK>;
+		};
+
+		intc: interrupt-controller@6e000 {
+			compatible = "sigma,smp8642-intc";
+			reg = <0x6e000 0x400>;
+			ranges = <0 0x6e000 0x400>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			irq0: irq0@000 {
+				reg = <0x000 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			irq1: irq1@100 {
+				reg = <0x100 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			irq2: irq2@300 {
+				reg = <0x300 0x100>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi
new file mode 100644
index 000000000000..7ed88ee629fb
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-smp8758.dtsi
@@ -0,0 +1,31 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "sigma,tango4-smp";
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&l2cc>;
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&l2cc>;
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+		interrupts =
+			<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/tango4-vantage-1172.dts b/arch/arm/boot/dts/tango4-vantage-1172.dts
new file mode 100644
index 000000000000..3e5b9c81a51c
--- /dev/null
+++ b/arch/arm/boot/dts/tango4-vantage-1172.dts
@@ -0,0 +1,37 @@
+/dts-v1/;
+
+#include "tango4-smp8758.dtsi"
+#include "tango4-common.dtsi"
+
+/ {
+	model = "Sigma Designs SMP8758 Vantage-1172 Rev E1";
+	compatible = "sigma,vantage-1172", "sigma,smp8758", "sigma,tango4";
+
+	aliases {
+		serial = &uart;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>; /* 2 GB */
+	};
+
+	chosen {
+		stdout-path = "serial:115200n8";
+	};
+};
+
+&eth0 {
+	phy-connection-type = "rgmii";
+	phy-handle = <&eth0_phy>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* Atheros AR8035 */
+	eth0_phy: ethernet-phy@4 {
+		compatible = "ethernet-phy-id004d.d072",
+			     "ethernet-phy-ieee802.3-c22";
+		interrupts = <37 IRQ_TYPE_EDGE_RISING>;
+		reg = <4>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index a9aec23e06f2..ec1aa64ded68 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -159,7 +159,7 @@
 				vin-ldo9-10-supply = <&vdd_5v0_sys>;
 				vin-ldo11-supply = <&vdd_3v3_run>;
 
-				sd0 {
+				vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1350000>;
@@ -397,6 +397,13 @@
 		non-removable;
 	};
 
+	/* CPU DFLL clock */
+	clock@0,70110000 {
+		status = "disabled";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
 	ahub@0,70300000 {
 		i2s@0,70301100 {
 			status = "okay";
@@ -487,6 +494,12 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 819e2ae2cabe..68669f791c8b 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -610,26 +610,20 @@
 
 	sata@0,70020000 {
 		compatible = "nvidia,tegra124-ahci";
-
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
-			<0x0 0x70020000 0x0 0x7000>; /* SATA */
-
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-
 		clocks = <&tegra_car TEGRA124_CLK_SATA>,
-			<&tegra_car TEGRA124_CLK_SATA_OOB>,
-			<&tegra_car TEGRA124_CLK_CML1>,
-			<&tegra_car TEGRA124_CLK_PLL_E>;
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
+			 <&tegra_car TEGRA124_CLK_CML1>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "sata", "sata-oob", "cml1", "pll_e";
-
 		resets = <&tegra_car 124>,
-			<&tegra_car 123>,
-			<&tegra_car 129>;
+			 <&tegra_car 123>,
+			 <&tegra_car 129>;
 		reset-names = "sata", "sata-oob", "sata-cold";
-
 		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
 		phy-names = "sata-phy";
-
 		status = "disabled";
 	};
 
@@ -638,7 +632,7 @@
 		reg = <0x0 0x70030000 0x0 0x10000>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_HDA>,
-		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2HDMI>,
 			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
 		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
 		resets = <&tegra_car 125>, /* hda */
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 969b828505ae..33173e1bace9 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -603,8 +603,8 @@
 			 <&tegra_car TEGRA20_CLK_PLL_E>;
 		clock-names = "pex", "afi", "pll_e";
 		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 6236bdecb48b..f2879cfcca62 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -126,6 +126,10 @@
 		};
 	};
 
+	hda@70030000 {
+		status = "okay";
+	};
+
 	sd1: sdhci@78000000 {
 		status = "okay";
 		bus-width = <4>;
@@ -149,6 +153,7 @@
 
 	usb-phy@7d000000 {
 		status = "okay";
+		dr_mode = "otg";
 		vbus-supply = <&usbo1_vbus_reg>;
 	};
 
@@ -175,7 +180,7 @@
 	backlight: backlight {
 		compatible = "pwm-backlight";
 
-		/* PWM0 */
+		/* PWM_BKL1 */
 		pwms = <&pwm 0 5000000>;
 		brightness-levels = <255 231 223 207 191 159 127 0>;
 		default-brightness-level = <6>;
@@ -186,10 +191,10 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "WAKE1_MICO";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			debounce-interval = <10>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index a5446cba9804..bf361277fe10 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -1,8 +1,9 @@
 #include "tegra30.dtsi"
 
 /*
- * Toradex Apalis T30 Device Tree
- * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
+ * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
  */
 / {
 	model = "Toradex Apalis T30";
@@ -33,8 +34,8 @@
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
+			vdd-supply = <&avdd_hdmi_3v3_reg>;
+			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
 
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -57,25 +58,25 @@
 
 			/* Apalis BKL1_PWM */
 			uart3_rts_n_pc0 {
-				nvidia,pins =	"uart3_rts_n_pc0";
+				nvidia,pins = "uart3_rts_n_pc0";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
 			uart3_cts_n_pa1 {
-				nvidia,pins =	"uart3_cts_n_pa1";
-				nvidia,function = "rsvd1";
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis CAN1 on SPI6 */
 			spi2_cs0_n_px3 {
-				nvidia,pins =   "spi2_cs0_n_px3",
-						"spi2_miso_px1",
-						"spi2_mosi_px0",
-						"spi2_sck_px2";
+				nvidia,pins = "spi2_cs0_n_px3",
+					      "spi2_miso_px1",
+					      "spi2_mosi_px0",
+					      "spi2_sck_px2";
 				nvidia,function = "spi6";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -91,10 +92,10 @@
 
 			/* Apalis CAN2 on SPI4 */
 			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
 				nvidia,function = "spi4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -108,6 +109,30 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
+			/* Apalis Digital Audio */
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+					      "dap1_din_pn1",
+					      "dap1_dout_pn2",
+					      "dap1_sclk_pn3";
+				nvidia,function = "hda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
 			/* Apalis I2C3 */
 			cam_i2c_scl_pbb1 {
 				nvidia,pins = "cam_i2c_scl_pbb1",
@@ -122,21 +147,21 @@
 
 			/* Apalis MMC1 */
 			sdmmc3_clk_pa6 {
-				nvidia,pins =	"sdmmc3_clk_pa6",
-						"sdmmc3_cmd_pa7";
+				nvidia,pins = "sdmmc3_clk_pa6",
+					      "sdmmc3_cmd_pa7";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat0_pb7 {
-				nvidia,pins =	"sdmmc3_dat0_pb7",
-						"sdmmc3_dat1_pb6",
-						"sdmmc3_dat2_pb5",
-						"sdmmc3_dat3_pb4",
-						"sdmmc3_dat4_pd1",
-						"sdmmc3_dat5_pd0",
-						"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
+				nvidia,pins = "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_dat4_pd1",
+					      "sdmmc3_dat5_pd0",
+					      "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
 				nvidia,function = "sdmmc3";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -151,32 +176,32 @@
 			};
 
 			/* Apalis PWM1 */
-			gpio_pu6 {
-				nvidia,pins =	"gpio_pu6";
+			pu6 {
+				nvidia,pins = "pu6";
 				nvidia,function = "pwm3";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM2 */
-			gpio_pu5 {
-				nvidia,pins =	"gpio_pu5";
+			pu5 {
+				nvidia,pins = "pu5";
 				nvidia,function = "pwm2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM3 */
-			gpio_pu4 {
-				nvidia,pins =	"gpio_pu4";
+			pu4 {
+				nvidia,pins = "pu4";
 				nvidia,function = "pwm1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 
 			/* Apalis PWM4 */
-			gpio_pu3 {
-				nvidia,pins =	"gpio_pu3";
+			pu3 {
+				nvidia,pins = "pu3";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -198,11 +223,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc1_cmd_pz1 {
-				nvidia,pins =	"sdmmc1_cmd_pz1",
-						"sdmmc1_dat0_py7",
-						"sdmmc1_dat1_py6",
-						"sdmmc1_dat2_py5",
-						"sdmmc1_dat3_py4";
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
 				nvidia,function = "sdmmc1";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -218,10 +243,10 @@
 
 			/* Apalis SPI1 */
 			spi1_sck_px5 {
-				nvidia,pins =   "spi1_sck_px5",
-						"spi1_mosi_px4",
-						"spi1_miso_px7",
-						"spi1_cs0_n_px6";
+				nvidia,pins = "spi1_sck_px5",
+					      "spi1_mosi_px4",
+					      "spi1_miso_px7",
+					      "spi1_cs0_n_px6";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -229,10 +254,10 @@
 
 			/* Apalis SPI2 */
 			lcd_sck_pz4 {
-				nvidia,pins =   "lcd_sck_pz4",
-						"lcd_sdout_pn5",
-						"lcd_sdin_pz2",
-						"lcd_cs0_n_pn4";
+				nvidia,pins = "lcd_sck_pz4",
+					      "lcd_sdout_pn5",
+					      "lcd_sdin_pz2",
+					      "lcd_cs0_n_pn4";
 				nvidia,function = "spi5";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -240,14 +265,14 @@
 
 			/* Apalis UART1 */
 			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -255,10 +280,10 @@
 
 			/* Apalis UART2 */
 			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -266,8 +291,8 @@
 
 			/* Apalis UART3 */
 			uart2_rxd_pc3 {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -275,8 +300,8 @@
 
 			/* Apalis UART4 */
 			uart3_rxd_pw7 {
-				nvidia,pins =   "uart3_rxd_pw7",
-						"uart3_txd_pw6";
+				nvidia,pins = "uart3_rxd_pw7",
+					      "uart3_txd_pw6";
 				nvidia,function = "uartc";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -312,21 +337,21 @@
 
 			/* eMMC (On-module) */
 			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_rst_n_pcc3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -334,10 +359,10 @@
 
 			/* LVDS Transceiver Configuration */
 			pbb0 {
-				nvidia,pins =	"pbb0",
-						"pbb7",
-						"pcc1",
-						"pcc2";
+				nvidia,pins = "pbb0",
+					      "pbb7",
+					      "pcc1",
+					      "pcc2";
 				nvidia,function = "rsvd2";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -345,10 +370,10 @@
 				nvidia,lock = <TEGRA_PIN_DISABLE>;
 			};
 			pbb3 {
-				nvidia,pins =	"pbb3",
-						"pbb4",
-						"pbb5",
-						"pbb6";
+				nvidia,pins = "pbb3",
+					      "pbb4",
+					      "pbb5",
+					      "pbb6";
 				nvidia,function = "displayb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -635,6 +660,7 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
+	/* eMMC */
 	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
@@ -666,18 +692,40 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		sys_3v3_reg: regulator@100 {
+		avdd_hdmi_pll_1v8_reg: regulator@100 {
 			compatible = "regulator-fixed";
 			reg = <100>;
+			regulator-name = "+V1.8_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
 			regulator-name = "3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		charge_pump_5v0_reg: regulator@101 {
+		avdd_hdmi_3v3_reg: regulator@102 {
 			compatible = "regulator-fixed";
-			reg = <101>;
+			reg = <102>;
+			regulator-name = "+V3.3_AVDD_HDMI";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		charge_pump_5v0_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
 			regulator-name = "5v0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 4d3ddc585641..3ff019f47d00 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -55,7 +55,7 @@
 
 		/* M41T0M6 real time clock on carrier board */
 		rtc@68 {
-			compatible = "stm,m41t00";
+			compatible = "st,m41t00";
 			reg = <0x68>;
 		};
 	};
@@ -84,6 +84,7 @@
 		};
 	};
 
+	/* SD/MMC */
 	sdhci@78000200 {
 		status = "okay";
 		bus-width = <4>;
@@ -136,10 +137,10 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
-			label = "Power";
+		wakeup {
+			label = "SODIMM pin 45 wakeup";
 			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
+			linux,code = <KEY_WAKEUP>;
 			debounce-interval = <10>;
 			gpio-key,wakeup;
 		};
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index c4ed1bec4d92..2d8c58fd9357 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -2,8 +2,8 @@
 #include "tegra30.dtsi"
 
 /*
- * Toradex Colibri T30 Device Tree
- * Compatible for Revisions 1.1B/1.1C/1.1D
+ * Toradex Colibri T30 Module Device Tree
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
  */
 / {
 	model = "Toradex Colibri T30";
@@ -15,8 +15,8 @@
 
 	host1x@50000000 {
 		hdmi@54280000 {
-			vdd-supply = <&sys_3v3_reg>;
-			pll-supply = <&vio_reg>;
+			vdd-supply = <&avdd_hdmi_3v3_reg>;
+			pll-supply = <&avdd_hdmi_pll_1v8_reg>;
 
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -39,7 +39,7 @@
 
 			/* Colibri Backlight PWM<A> */
 			sdmmc3_dat3_pb4 {
-				nvidia,pins =	"sdmmc3_dat3_pb4";
+				nvidia,pins = "sdmmc3_dat3_pb4";
 				nvidia,function = "pwm0";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -66,15 +66,6 @@
 				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 
-			/* Thermal alert, need to be disabled */
-			lcd_dc1_pd2 {
-				nvidia,pins = "lcd_dc1_pd2";
-				nvidia,function = "rsvd3";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
-			};
-
 			/* Colibri MMC */
 			kb_row10_ps2 {
 				nvidia,pins = "kb_row10_ps2";
@@ -83,11 +74,11 @@
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			kb_row11_ps3 {
-				nvidia,pins =	"kb_row11_ps3",
-						"kb_row12_ps4",
-						"kb_row13_ps5",
-						"kb_row14_ps6",
-						"kb_row15_ps7";
+				nvidia,pins = "kb_row11_ps3",
+					      "kb_row12_ps4",
+					      "kb_row13_ps5",
+					      "kb_row14_ps6",
+					      "kb_row15_ps7";
 				nvidia,function = "sdmmc2";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -95,17 +86,17 @@
 
 			/* Colibri SSP */
 			ulpi_clk_py0 {
-				nvidia,pins =   "ulpi_clk_py0",
-						"ulpi_dir_py1",
-						"ulpi_nxt_py2",
-						"ulpi_stp_py3";
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_dir_py1",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
 				nvidia,function = "spi1";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc3_dat6_pd3 {
-				nvidia,pins =	"sdmmc3_dat6_pd3",
-						"sdmmc3_dat7_pd4";
+				nvidia,pins = "sdmmc3_dat6_pd3",
+					      "sdmmc3_dat7_pd4";
 				nvidia,function = "spdif";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
@@ -113,14 +104,14 @@
 
 			/* Colibri UART_A */
 			ulpi_data0 {
-				nvidia,pins =   "ulpi_data0_po1",
-						"ulpi_data1_po2",
-						"ulpi_data2_po3",
-						"ulpi_data3_po4",
-						"ulpi_data4_po5",
-						"ulpi_data5_po6",
-						"ulpi_data6_po7",
-						"ulpi_data7_po0";
+				nvidia,pins = "ulpi_data0_po1",
+					      "ulpi_data1_po2",
+					      "ulpi_data2_po3",
+					      "ulpi_data3_po4",
+					      "ulpi_data4_po5",
+					      "ulpi_data5_po6",
+					      "ulpi_data6_po7",
+					      "ulpi_data7_po0";
 				nvidia,function = "uarta";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -128,10 +119,10 @@
 
 			/* Colibri UART_B */
 			gmi_a16_pj7 {
-				nvidia,pins =   "gmi_a16_pj7",
-						"gmi_a17_pb0",
-						"gmi_a18_pb1",
-						"gmi_a19_pk7";
+				nvidia,pins = "gmi_a16_pj7",
+					      "gmi_a17_pb0",
+					      "gmi_a18_pb1",
+					      "gmi_a19_pk7";
 				nvidia,function = "uartd";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -139,8 +130,8 @@
 
 			/* Colibri UART_C */
 			uart2_rxd {
-				nvidia,pins =   "uart2_rxd_pc3",
-						"uart2_txd_pc2";
+				nvidia,pins = "uart2_rxd_pc3",
+					      "uart2_txd_pc2";
 				nvidia,function = "uartb";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
@@ -148,25 +139,59 @@
 
 			/* eMMC */
 			sdmmc4_clk_pcc4 {
-				nvidia,pins =	"sdmmc4_clk_pcc4",
-						"sdmmc4_rst_n_pcc3";
+				nvidia,pins = "sdmmc4_clk_pcc4",
+					      "sdmmc4_rst_n_pcc3";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
 			sdmmc4_dat0_paa0 {
-				nvidia,pins =	"sdmmc4_dat0_paa0",
-						"sdmmc4_dat1_paa1",
-						"sdmmc4_dat2_paa2",
-						"sdmmc4_dat3_paa3",
-						"sdmmc4_dat4_paa4",
-						"sdmmc4_dat5_paa5",
-						"sdmmc4_dat6_paa6",
-						"sdmmc4_dat7_paa7";
+				nvidia,pins = "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
 				nvidia,function = "sdmmc4";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
+
+			/* Power I2C (On-module) */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_PEN_INT# */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
 		};
 	};
 
@@ -236,7 +261,7 @@
 				/*
 				 * EN_+V3.3 switching via FET:
 				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
-				 * see also v3_3 fixed supply
+				 * see also 3v3 fixed supply
 				 */
 				ldo2_reg: ldo2 {
 					regulator-name = "en_3v3";
@@ -295,6 +320,46 @@
 			};
 		};
 
+		/* STMPE811 touch screen controller */
+		stmpe811@41 {
+			compatible = "st,stmpe811";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x41>;
+			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				reg = <0>;
+				/* 3.25 MHz ADC clock speed */
+				st,adc-freq = <1>;
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 12-bit ADC */
+				st,mod-12b = <1>;
+				/* internal ADC reference */
+				st,ref-sel = <0>;
+				/* ADC converstion time: 80 clocks */
+				st,sample-time = <4>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
 		/*
 		 * LM95245 temperature sensor
 		 * Note: OVERT_N directly connected to PMIC PWRDN
@@ -331,7 +396,8 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	emmc: sdhci@78000600 {
+	/* eMMC */
+	sdhci@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -365,18 +431,40 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		sys_3v3_reg: regulator@100 {
+		avdd_hdmi_pll_1v8_reg: regulator@100 {
 			compatible = "regulator-fixed";
 			reg = <100>;
+			regulator-name = "+V1.8_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
 			regulator-name = "3v3";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		charge_pump_5v0_reg: regulator@101 {
+		avdd_hdmi_3v3_reg: regulator@102 {
 			compatible = "regulator-fixed";
-			reg = <101>;
+			reg = <102>;
+			regulator-name = "+V3.3_AVDD_HDMI";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		charge_pump_5v0_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
 			regulator-name = "5v0";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index c6938ad1b543..313e260529a3 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -42,8 +42,8 @@
 			 <&tegra_car TEGRA30_CLK_CML0>;
 		clock-names = "pex", "afi", "pll_e", "cml";
 		resets = <&tegra_car 70>,
-		         <&tegra_car 72>,
-		         <&tegra_car 74>;
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
 		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
@@ -153,7 +153,7 @@
 				  &tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
-			         <&tegra_car 98>;
+				 <&tegra_car 98>;
 			reset-names = "3d", "3d2";
 		};
 
@@ -457,7 +457,7 @@
 	};
 
 	i2c@7000c000 {
-		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
 		reg = <0x7000c000 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -662,7 +662,7 @@
 		reg = <0x70030000 0x10000>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_HDA>,
-		         <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA30_CLK_HDA2HDMI>,
 			 <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
 		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
 		resets = <&tegra_car 125>, /* hda */
diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi
index 3537ae5b2146..5288e6dffef7 100644
--- a/arch/arm/boot/dts/twl4030_omap3.dtsi
+++ b/arch/arm/boot/dts/twl4030_omap3.dtsi
@@ -19,7 +19,7 @@
 	 */
 	twl4030_pins: pinmux_twl4030_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index a4fa5703c42b..e373f59cea9c 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -24,7 +24,7 @@
 &omap4_pmx_wkup {
 	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
 		pinctrl-single,pins = <
-			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+			OMAP4_IOPAD(0x054, PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
 	};
 };
@@ -32,7 +32,7 @@
 &omap4_pmx_core {
 	twl6030_pins: pinmux_twl6030_pins {
 		pinctrl-single,pins = <
-			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+			OMAP4_IOPAD(0x19e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi
new file mode 100644
index 000000000000..61a095598206
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-common32.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Device Tree Source commonly used by UniPhier ARM SoCs
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	clocks {
+		refclk: ref {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&uart_clk>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&uart_clk>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&uart_clk>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&uart_clk>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			/* specify compatible in each SoC DTSI */
+			reg = <0x5f801000 0xe00>;
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
index bfd3bb8c8285..ec94b7a661f2 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -57,8 +57,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
@@ -73,15 +72,6 @@
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
-};
-
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
-};
-
 &ethsc {
 	interrupts = <0 49 4>;
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
index a6a185fae8f1..dadd86070c98 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,ph1-ld4";
@@ -55,6 +55,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -77,177 +78,109 @@
 			clock-frequency = <100000000>;
 		};
 	};
+};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			interrupts = <0 33 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			interrupts = <0 35 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			interrupts = <0 37 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			interrupts = <0 29 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		i2c0: i2c@58400000 {
-			compatible = "socionext,uniphier-i2c";
-			status = "disabled";
-			reg = <0x58400000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0>;
-			interrupts = <0 41 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c1: i2c@58480000 {
-			compatible = "socionext,uniphier-i2c";
-			status = "disabled";
-			reg = <0x58480000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1>;
-			interrupts = <0 42 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <100000>;
-		};
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(512 * 1024)>;
+		cache-sets = <256>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
 
-		/* chip-internal connection for DMD */
-		i2c2: i2c@58500000 {
-			compatible = "socionext,uniphier-i2c";
-			reg = <0x58500000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
-			interrupts = <0 43 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <400000>;
-		};
+	i2c0: i2c@58400000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58400000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		i2c3: i2c@58580000 {
-			compatible = "socionext,uniphier-i2c";
-			status = "disabled";
-			reg = <0x58580000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3>;
-			interrupts = <0 44 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <100000>;
-		};
+	i2c1: i2c@58480000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58480000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
-		};
+	/* chip-internal connection for DMD */
+	i2c2: i2c@58500000 {
+		compatible = "socionext,uniphier-i2c";
+		reg = <0x58500000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <400000>;
+	};
 
-		usb0: usb@5a800100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a800100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb0>;
-			interrupts = <0 80 4>;
-		};
+	i2c3: i2c@58580000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58580000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		usb1: usb@5a810100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a810100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb1>;
-			interrupts = <0 81 4>;
-		};
+	usb0: usb@5a800100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a800100 0x100>;
+		interrupts = <0 80 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0>;
+	};
 
-		usb2: usb@5a820100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a820100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2>;
-			interrupts = <0 82 4>;
-		};
+	usb1: usb@5a810100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a810100 0x100>;
+		interrupts = <0 81 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+	};
 
-		pinctrl: pinctrl@5f801000 {
-			compatible = "socionext,ph1-ld4-pinctrl",
-				     "syscon";
-			reg = <0x5f801000 0xe00>;
-		};
+	usb2: usb@5a820100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a820100 0x100>;
+		interrupts = <0 82 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2>;
+	};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+};
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+&refclk {
+	clock-frequency = <24576000>;
+};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
-	};
+&serial3 {
+	interrupts = <0 29 4>;
 };
 
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+	compatible = "socionext,ph1-ld4-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
index f80f772d99fb..b8134c6e094b 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts
@@ -57,8 +57,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
@@ -75,15 +74,6 @@
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
-};
-
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
-};
-
 &ethsc {
 	interrupts = <0 52 4>;
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
index c6499ee65bc6..532115234025 100644
--- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi
@@ -53,7 +53,7 @@
 	compatible = "socionext,ph1-ld6b";
 };
 
-/* UART3 unavilable: the pads are not wired to the package balls */
+/* UART3 unavailable: the pads are not wired to the package balls */
 &serial3 {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts
new file mode 100644
index 000000000000..d34358632bec
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ace.dts
@@ -0,0 +1,113 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Ace Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Ace Board";
+	compatible = "socionext,ph1-pro4-ace", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
index 69a5b7d39629..95f631a3de35 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -57,8 +57,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
@@ -75,15 +74,6 @@
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
-};
-
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
-};
-
 &ethsc {
 	interrupts = <0 50 4>;
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
new file mode 100644
index 000000000000..7c3a1fcc9f3c
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-sanji.dts
@@ -0,0 +1,108 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Sanji Board
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Sanji Board";
+	compatible = "socionext,ph1-pro4-sanji", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
index e8bbc454d788..20f3f2ae7fa4 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,ph1-pro4";
@@ -56,12 +56,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -84,192 +86,119 @@
 			clock-frequency = <50000000>;
 		};
 	};
+};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			interrupts = <0 33 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			interrupts = <0 35 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			interrupts = <0 37 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			interrupts = <0 29 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		i2c0: i2c@58780000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58780000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0>;
-			interrupts = <0 41 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c1: i2c@58781000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58781000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1>;
-			interrupts = <0 42 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c2: i2c@58782000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58782000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
-			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c3: i2c@58783000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58783000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3>;
-			interrupts = <0 44 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		/* i2c4 does not exist */
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(768 * 1024)>;
+		cache-sets = <256>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
 
-		/* chip-internal connection for DMD */
-		i2c5: i2c@58785000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58785000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		/* chip-internal connection for HDMI */
-		i2c6: i2c@58786000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58786000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 26 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
+	i2c1: i2c@58781000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58781000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
-		};
+	i2c2: i2c@58782000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58782000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		usb2: usb@5a800100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a800100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2>;
-			interrupts = <0 80 4>;
-		};
+	i2c3: i2c@58783000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58783000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		usb3: usb@5a810100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a810100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb3>;
-			interrupts = <0 81 4>;
-		};
+	/* i2c4 does not exist */
 
-		pinctrl: pinctrl@5f801000 {
-			compatible = "socionext,ph1-pro4-pinctrl",
-				     "syscon";
-			reg = <0x5f801000 0xe00>;
-		};
+	/* chip-internal connection for DMD */
+	i2c5: i2c@58785000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58785000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 25 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
+	/* chip-internal connection for HDMI */
+	i2c6: i2c@58786000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58786000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 26 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
+	usb2: usb@5a800100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a800100 0x100>;
+		interrupts = <0 80 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2>;
+	};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
+	usb3: usb@5a810100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a810100 0x100>;
+		interrupts = <0 81 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3>;
 	};
 };
 
-/include/ "uniphier-pinctrl.dtsi"
+&refclk {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	compatible = "socionext,ph1-pro4-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
index 59c2b127cffa..24f6f664b269 100644
--- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,ph1-pro5";
@@ -56,12 +56,14 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -84,169 +86,113 @@
 			clock-frequency = <50000000>;
 		};
 	};
+};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			interrupts = <0 33 4>;
-			clocks = <&uart_clk>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			interrupts = <0 35 4>;
-			clocks = <&uart_clk>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			interrupts = <0 37 4>;
-			clocks = <&uart_clk>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			interrupts = <0 177 4>;
-			clocks = <&uart_clk>;
-		};
-
-		i2c0: i2c@58780000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58780000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0>;
-			interrupts = <0 41 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c1: i2c@58781000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58781000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1>;
-			interrupts = <0 42 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c2: i2c@58782000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58782000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
-			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>;
+		interrupts = <0 190 4>, <0 191 4>;
+		cache-unified;
+		cache-size = <(2 * 1024 * 1024)>;
+		cache-sets = <512>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+		next-level-cache = <&l3>;
+	};
 
-		i2c3: i2c@58783000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58783000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3>;
-			interrupts = <0 44 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
+	l3: l3-cache@500c8000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(2 * 1024 * 1024)>;
+		cache-sets = <512>;
+		cache-line-size = <256>;
+		cache-level = <3>;
+	};
 
-		/* i2c4 does not exist */
-
-		/* chip-internal connection for DMD */
-		i2c5: i2c@58785000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58785000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		/* chip-internal connection for HDMI */
-		i2c6: i2c@58786000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58786000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 26 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
+	i2c1: i2c@58781000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58781000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
-		};
+	i2c2: i2c@58782000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58782000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		pinctrl: pinctrl@5f801000 {
-			compatible = "socionext,ph1-pro5-pinctrl", "syscon";
-			reg = <0x5f801000 0xe00>;
-		};
+	i2c3: i2c@58783000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58783000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
+	/* i2c4 does not exist */
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x304>;
-			clocks = <&arm_timer_clk>;
-		};
+	/* chip-internal connection for DMD */
+	i2c5: i2c@58785000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58785000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 25 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
+	/* chip-internal connection for HDMI */
+	i2c6: i2c@58786000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58786000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 26 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
 	};
 };
 
-/include/ "uniphier-pinctrl.dtsi"
+&refclk {
+	clock-frequency = <20000000>;
+};
+
+&pinctrl {
+	compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
index 1a440f87fa92..acb420492b36 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -58,8 +58,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
@@ -74,15 +73,6 @@
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
-};
-
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
-};
-
 &ethsc {
 	interrupts = <0 49 4>;
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
index 3cc90cd37a26..03292f443305 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -56,16 +56,24 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			next-level-cache = <&l2>;
 		};
 	};
 
 	clocks {
+		refclk: ref {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24576000>;
+		};
+
 		arm_timer_clk: arm_timer_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
@@ -92,12 +100,6 @@
 		ranges;
 		interrupt-parent = <&intc>;
 
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
 		timer@20000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20000200 0x20>;
@@ -120,6 +122,18 @@
 			      <0x20000100 0x100>;
 		};
 
+		l2: l2-cache@500c0000 {
+			compatible = "socionext,uniphier-system-cache";
+			reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
+			      <0x506c0000 0x400>;
+			interrupts = <0 174 4>, <0 175 4>;
+			cache-unified;
+			cache-size = <(512 * 1024)>;
+			cache-sets = <256>;
+			cache-line-size = <128>;
+			cache-level = <2>;
+		};
+
 		serial0: serial@54006800 {
 			compatible = "socionext,uniphier-uart";
 			status = "disabled";
@@ -202,10 +216,17 @@
 			clock-frequency = <400000>;
 		};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
 		};
 
 		usb0: usb@5a800100 {
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
index 955d417a5c42..d594f40e7f76 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -57,8 +57,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
+		stdout-path = "serial0:115200n8";
 	};
 
 	aliases {
@@ -73,15 +72,6 @@
 	};
 };
 
-&extbus {
-	ranges = <0 0x00000000 0x0f000000 0x01000000
-		  1 0x00000000 0x00000000 0x08000000>;
-};
-
-&support_card {
-	ranges = <0x00000000 1 0x03f00000 0x00100000>;
-};
-
 &ethsc {
 	interrupts = <0 48 4>;
 };
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
index 58067dfc16e5..6bfd29a05575 100644
--- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,ph1-sld8";
@@ -55,6 +55,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -77,177 +78,108 @@
 			clock-frequency = <100000000>;
 		};
 	};
+};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			interrupts = <0 33 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			interrupts = <0 35 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			interrupts = <0 37 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			interrupts = <0 29 4>;
-			clocks = <&uart_clk>;
-			fifo-size = <64>;
-		};
-
-		i2c0: i2c@58400000 {
-			compatible = "socionext,uniphier-i2c";
-			status = "disabled";
-			reg = <0x58400000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0>;
-			interrupts = <0 41 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c1: i2c@58480000 {
-			compatible = "socionext,uniphier-i2c";
-			status = "disabled";
-			reg = <0x58480000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1>;
-			interrupts = <0 42 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <100000>;
-		};
-
-		/* chip-internal connection for DMD */
-		i2c2: i2c@58500000 {
-			compatible = "socionext,uniphier-i2c";
-			reg = <0x58500000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
-			interrupts = <0 43 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <400000>;
-		};
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>;
+		cache-unified;
+		cache-size = <(256 * 1024)>;
+		cache-sets = <256>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
 
-		i2c3: i2c@58580000 {
-			compatible = "socionext,uniphier-i2c";
-			status = "disabled";
-			reg = <0x58580000 0x40>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3>;
-			interrupts = <0 44 1>;
-			clocks = <&iobus_clk>;
-			clock-frequency = <100000>;
-		};
+	i2c0: i2c@58400000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58400000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
-		};
+	i2c1: i2c@58480000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58480000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		usb0: usb@5a800100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a800100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb0>;
-			interrupts = <0 80 4>;
-		};
+	/* chip-internal connection for DMD */
+	i2c2: i2c@58500000 {
+		compatible = "socionext,uniphier-i2c";
+		reg = <0x58500000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 43 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <400000>;
+	};
 
-		usb1: usb@5a810100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a810100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb1>;
-			interrupts = <0 81 4>;
-		};
+	i2c3: i2c@58580000 {
+		compatible = "socionext,uniphier-i2c";
+		status = "disabled";
+		reg = <0x58580000 0x40>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&iobus_clk>;
+		clock-frequency = <100000>;
+	};
 
-		usb2: usb@5a820100 {
-			compatible = "socionext,uniphier-ehci", "generic-ehci";
-			status = "disabled";
-			reg = <0x5a820100 0x100>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usb2>;
-			interrupts = <0 82 4>;
-		};
+	usb0: usb@5a800100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a800100 0x100>;
+		interrupts = <0 80 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb0>;
+	};
 
-		pinctrl: pinctrl@5f801000 {
-			compatible = "socionext,ph1-sld8-pinctrl",
-				     "syscon";
-			reg = <0x5f801000 0xe00>;
-		};
+	usb1: usb@5a810100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a810100 0x100>;
+		interrupts = <0 81 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+	};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+	usb2: usb@5a820100 {
+		compatible = "socionext,uniphier-ehci", "generic-ehci";
+		status = "disabled";
+		reg = <0x5a820100 0x100>;
+		interrupts = <0 82 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb2>;
+	};
+};
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0x104>;
-			clocks = <&arm_timer_clk>;
-		};
+&refclk {
+	clock-frequency = <25000000>;
+};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
-	};
+&serial3 {
+	interrupts = <0 29 4>;
 };
 
-/include/ "uniphier-pinctrl.dtsi"
+&pinctrl {
+	compatible = "socionext,ph1-sld8-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index f67445f4f10d..24592798a368 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -63,6 +63,11 @@
 		function = "i2c3";
 	};
 
+	pinctrl_i2c4: i2c4_grp {
+		groups = "i2c4";
+		function = "i2c4";
+	};
+
 	pinctrl_uart0: uart0_grp {
 		groups = "uart0";
 		function = "uart0";
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
new file mode 100644
index 000000000000..bf2619e4d489
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts
@@ -0,0 +1,88 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Gentil Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+	model = "UniPhier ProXstream2 Gentil Board";
+	compatible = "socionext,proxstream2-gentil", "socionext,proxstream2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "st,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
new file mode 100644
index 000000000000..498acac3d95d
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts
@@ -0,0 +1,78 @@
+/*
+ * Device Tree Source for UniPhier ProXstream2 Vodka Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-proxstream2.dtsi"
+
+/ {
+	model = "UniPhier ProXstream2 Vodka Board";
+	compatible = "socionext,proxstream2-vodka", "socionext,proxstream2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		i2c0 = &i2c0;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
index 4c7b24611012..4ac484c6ce4e 100644
--- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi
+++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi
@@ -42,7 +42,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/include/ "skeleton.dtsi"
+/include/ "uniphier-common32.dtsi"
 
 / {
 	compatible = "socionext,proxstream2";
@@ -56,24 +56,28 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -96,178 +100,110 @@
 			clock-frequency = <50000000>;
 		};
 	};
+};
 
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		interrupt-parent = <&intc>;
-
-		extbus: extbus {
-			compatible = "simple-bus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-		};
-
-		serial0: serial@54006800 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006800 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart0>;
-			interrupts = <0 33 4>;
-			clocks = <&uart_clk>;
-		};
-
-		serial1: serial@54006900 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006900 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart1>;
-			interrupts = <0 35 4>;
-			clocks = <&uart_clk>;
-		};
-
-		serial2: serial@54006a00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006a00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart2>;
-			interrupts = <0 37 4>;
-			clocks = <&uart_clk>;
-		};
-
-		serial3: serial@54006b00 {
-			compatible = "socionext,uniphier-uart";
-			status = "disabled";
-			reg = <0x54006b00 0x40>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_uart3>;
-			interrupts = <0 177 4>;
-			clocks = <&uart_clk>;
-		};
-
-		i2c0: i2c@58780000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58780000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c0>;
-			interrupts = <0 41 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c1: i2c@58781000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58781000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c1>;
-			interrupts = <0 42 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c2: i2c@58782000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58782000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
-			interrupts = <0 43 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		i2c3: i2c@58783000 {
-			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
-			reg = <0x58783000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c3>;
-			interrupts = <0 44 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
-		};
-
-		/* chip-internal connection for DMD */
-		i2c4: i2c@58784000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58784000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 45 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
+&soc {
+	l2: l2-cache@500c0000 {
+		compatible = "socionext,uniphier-system-cache";
+		reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>;
+		interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
+		cache-unified;
+		cache-size = <(1280 * 1024)>;
+		cache-sets = <512>;
+		cache-line-size = <128>;
+		cache-level = <2>;
+	};
 
-		/* chip-internal connection for STM */
-		i2c5: i2c@58785000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58785000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 25 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
+	i2c0: i2c@58780000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58780000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 41 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c0>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		/* chip-internal connection for HDMI */
-		i2c6: i2c@58786000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58786000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 26 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
+	i2c1: i2c@58781000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58781000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 42 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		system-bus-controller-misc@59800000 {
-			compatible = "socionext,uniphier-system-bus-controller-misc",
-				     "syscon";
-			reg = <0x59800000 0x2000>;
-		};
+	i2c2: i2c@58782000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58782000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2>;
+		interrupts = <0 43 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		pinctrl: pinctrl@5f801000 {
-			compatible = "socionext,proxstream2-pinctrl", "syscon";
-			reg = <0x5f801000 0xe00>;
-		};
+	i2c3: i2c@58783000 {
+		compatible = "socionext,uniphier-fi2c";
+		status = "disabled";
+		reg = <0x58783000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 44 4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <100000>;
+	};
 
-		timer@60000200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x60000200 0x20>;
-			interrupts = <1 11 0xf04>;
-			clocks = <&arm_timer_clk>;
-		};
+	/* chip-internal connection for DMD */
+	i2c4: i2c@58784000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58784000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 45 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
 
-		timer@60000600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x60000600 0x20>;
-			interrupts = <1 13 0xf04>;
-			clocks = <&arm_timer_clk>;
-		};
+	/* chip-internal connection for STM */
+	i2c5: i2c@58785000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58785000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 25 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
+	};
 
-		intc: interrupt-controller@60001000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x60001000 0x1000>,
-			      <0x60000100 0x100>;
-		};
+	/* chip-internal connection for HDMI */
+	i2c6: i2c@58786000 {
+		compatible = "socionext,uniphier-fi2c";
+		reg = <0x58786000 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <0 26 4>;
+		clocks = <&i2c_clk>;
+		clock-frequency = <400000>;
 	};
 };
 
-/include/ "uniphier-pinctrl.dtsi"
+&refclk {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	compatible = "socionext,proxstream2-pinctrl", "syscon";
+};
diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
index 3d29d2806cc0..f7df0881c5e0 100644
--- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
+++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi
@@ -43,7 +43,7 @@
  */
 
 &i2c0 {
-	eeprom {
+	eeprom@50 {
 		compatible = "microchip,24lc128";
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index da271e3b922a..51ecc9b9c0ce 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -42,11 +42,15 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-&extbus {
+&system_bus {
+	status = "okay";
+	ranges = <1 0x00000000 0x42000000 0x02000000>;
+
 	support_card: support_card {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		ranges = <0x00000000 1 0x01f00000 0x00100000>;
 
 		ethsc: ethernet@00000000 {
 			compatible = "smsc,lan9118", "smsc,lan9115";
diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi
index 12edafefd44a..9beea8976584 100644
--- a/arch/arm/boot/dts/usb_a9260_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9260_common.dtsi
@@ -115,7 +115,7 @@
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
index 68c0de36c339..8cc6edb29694 100644
--- a/arch/arm/boot/dts/usb_a9263.dts
+++ b/arch/arm/boot/dts/usb_a9263.dts
@@ -143,7 +143,7 @@
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 01f40197ea13..d23320af5ea7 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -30,9 +30,69 @@
 	};
 
 	core-module@10000000 {
-		compatible = "arm,core-module-versatile", "syscon";
+		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
 
+		led@08.0 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x01>;
+			label = "versatile:0";
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+		led@08.1 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x02>;
+			label = "versatile:1";
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+		led@08.2 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x04>;
+			label = "versatile:2";
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+		led@08.3 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x08>;
+			label = "versatile:3";
+			default-state = "off";
+		};
+		led@08.4 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x10>;
+			label = "versatile:4";
+			default-state = "off";
+		};
+		led@08.5 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x20>;
+			label = "versatile:5";
+			default-state = "off";
+		};
+		led@08.6 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x40>;
+			label = "versatile:6";
+			default-state = "off";
+		};
+		led@08.7 {
+			compatible = "register-bit-led";
+			offset = <0x08>;
+			mask = <0x80>;
+			label = "versatile:7";
+			default-state = "off";
+		};
+
 		/* OSC1 on AB, OSC4 on PB */
 		osc1: cm_aux_osc@24M {
 			#clock-cells = <0>;
@@ -88,7 +148,7 @@
 	};
 
 	amba {
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
@@ -110,7 +170,11 @@
 			interrupt-parent = <&vic>;
 			interrupts = <31>; /* Cascaded to vic */
 			clear-mask = <0xffffffff>;
-			valid-mask = <0xffc203f8>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * table 4-36 page 4-50 of ARM DUI 0225D
+			 */
+			valid-mask = <0x0760031b>;
 		};
 
 		dma@10130000 {
@@ -266,8 +330,8 @@
 			};
 			mmc@5000 {
 				compatible = "arm,pl180", "arm,primecell";
-				reg = < 0x5000 0x1000>;
-				interrupts-extended = <&vic 22 &sic 2>;
+				reg = <0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 1>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index b83137f66034..33a8eb28374e 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -5,6 +5,16 @@
 	compatible = "arm,versatile-pb";
 
 	amba {
+		/* The Versatile PB is using more SIC IRQ lines than the AB */
+		sic: intc@10003000 {
+			clear-mask = <0xffffffff>;
+			/*
+			 * Valid interrupt lines mask according to
+			 * figure 3-30 page 3-74 of ARM DUI 0224B
+			 */
+			valid-mask = <0x7fe003ff>;
+		};
+
 		gpio2: gpio@101e6000 {
 			compatible = "arm,pl061", "arm,primecell";
 			reg = <0x101e6000 0x1000>;
@@ -67,6 +77,13 @@
 		};
 
 		fpga {
+			mmc@5000 {
+				/*
+				 * Overrides the interrupt assignment from
+				 * the Versatile AB board file.
+				 */
+				interrupts-extended = <&sic 22 &sic 23>;
+			};
 			uart@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
@@ -86,7 +103,8 @@
 			mmc@b000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts-extended = <&vic 23 &sic 2>;
+				interrupt-parent = <&sic>;
+				interrupts = <1>, <2>;
 				clocks = <&xtal24mhz>, <&pclk>;
 				clock-names = "mclk", "apb_pclk";
 			};
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 21b02874bea3..7a556b92e55c 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -66,7 +66,7 @@
 		};
 
 		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 3 0 0x200000>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index e712c0af149b..47e4a115adef 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -65,7 +65,7 @@
 		};
 
 		iofpga@7,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 7 0 0x20000>;
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index ed65e0f7dfc0..4d8b7f693535 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
@@ -18,38 +50,36 @@
 		clock-frequency = <16000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sys_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		/* USBH_PEN */
-		usbh_vbus_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_reg>;
-			reg = <1>;
-			regulator-name = "usbh_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
-			vin-supply = <&sys_5v0_reg>;
-		};
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+		vin-supply = <&reg_5v0>;
 	};
 };
 
 &bl {
 	brightness-levels = <0 4 8 16 32 64 128 255>;
 	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
 	status  = "okay";
 };
 
@@ -100,6 +130,10 @@
 	status = "okay";
 };
 
+&reg_module_3v3 {
+	vin-supply = <&reg_3v3>;
+};
+
 &uart0 {
 	status = "okay";
 };
@@ -113,7 +147,7 @@
 };
 
 &usbh1 {
-	vbus-supply = <&usbh_vbus_reg>;
+	vbus-supply = <&reg_usbh_vbus>;
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index 68ca125b56ea..fda7f28101e1 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -1,26 +1,96 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
 	bl: backlight {
 		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
 		pwms = <&pwm0 0 5000000 0>;
+		enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_module_3v3_avdd: regulator-module-3v3-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AVDD_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &adc0 {
 	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
 };
 
 &adc1 {
 	status = "okay";
+	vref-supply = <&reg_module_3v3_avdd>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan0>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&clks {
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_50M>,
+				 <&clks VF610_CLK_ENET_50M>;
 };
 
 &dspi1 {
@@ -38,10 +108,12 @@
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
 	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
 };
 
 &fec1 {
 	phy-mode = "rmii";
+	phy-supply = <&reg_module_3v3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 };
@@ -52,6 +124,26 @@
 	pinctrl-0 = <&pinctrl_i2c0>;
 };
 
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <32>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0>;
@@ -105,6 +197,20 @@
 
 &iomuxc {
 	vf610-colibri {
+		pinctrl_flexcan0: can0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__CAN0_RX	0x31F1
+				VF610_PAD_PTB15__CAN0_TX	0x31F2
+			>;
+		};
+
+		pinctrl_flexcan1: can1grp {
+			fsl,pins = <
+				VF610_PAD_PTB16__CAN1_RX	0x31F1
+				VF610_PAD_PTB17__CAN1_TX	0x31F2
+			>;
+		};
+
 		pinctrl_gpio_ext: gpio_ext {
 			fsl,pins = <
 				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
@@ -149,6 +255,12 @@
 			>;
 		};
 
+		pinctrl_gpio_bl_on: gpio_bl_on {
+			fsl,pins = <
+				VF610_PAD_PTC0__GPIO_45		0x22ef
+			>;
+		};
+
 		pinctrl_i2c0: i2c0grp {
 			fsl,pins = <
 				VF610_PAD_PTB14__I2C0_SCL		0x37ff
@@ -156,6 +268,25 @@
 			>;
 		};
 
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
 		pinctrl_pwm0: pwm0grp {
 			fsl,pins = <
 				VF610_PAD_PTB0__FTM0_CH0		0x1182
@@ -174,6 +305,8 @@
 			fsl,pins = <
 				VF610_PAD_PTB10__UART0_TX		0x21a2
 				VF610_PAD_PTB11__UART0_RX		0x21a1
+				VF610_PAD_PTB12__UART0_RTS		0x21a2
+				VF610_PAD_PTB13__UART0_CTS		0x21a1
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
index 7fc782c4fc52..b3aeab58f718 100644
--- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -15,3 +47,8 @@
 	model = "Toradex Colibri VF50 on Colibri Evaluation Board";
 	compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
 };
+
+&touchscreen {
+	vf50-ts-min-pressure = <200>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi
index cee34a32f25b..3fe1f48c2aec 100644
--- a/arch/arm/boot/dts/vf500-colibri.dtsi
+++ b/arch/arm/boot/dts/vf500-colibri.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf500.dtsi"
@@ -17,4 +49,51 @@
 	memory {
 		reg = <0x80000000 0x8000000>;
 	};
+
+	touchscreen: vf50-touchscreen {
+		compatible = "toradex,vf50-touchscreen";
+		io-channels = <&adc1 0>,<&adc0 0>,
+				<&adc0 1>,<&adc1 2>;
+		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "idle","default","gpios";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>;
+		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		vf50-ts-min-pressure = <200>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_touchctrl_idle: touchctrl_idle {
+			fsl,pins = <
+				VF610_PAD_PTA18__GPIO_8		0x006d
+				VF610_PAD_PTA19__GPIO_9		0x006c
+				>;
+		};
+
+		pinctrl_touchctrl_default: touchctrl_default {
+			fsl,pins = <
+				VF610_PAD_PTA18__ADC0_SE0	0x0040
+				VF610_PAD_PTA19__ADC0_SE1	0x0040
+				VF610_PAD_PTA16__ADC1_SE0	0x0040
+				VF610_PAD_PTB2__ADC1_SE2	0x0040
+				>;
+		};
+
+		pinctrl_touchctrl_gpios: touchctrl_gpios {
+			fsl,pins = <
+				VF610_PAD_PTA23__GPIO_13	0x22e9
+				VF610_PAD_PTB23__GPIO_93	0x22e9
+				VF610_PAD_PTA22__GPIO_12	0x22e9
+				VF610_PAD_PTA11__GPIO_4		0x22e9
+				>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi
index e976d2fa1527..9d372720ad3f 100644
--- a/arch/arm/boot/dts/vf500.dtsi
+++ b/arch/arm/boot/dts/vf500.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -43,6 +75,15 @@
 				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
 			};
 		};
+
+		aips-bus@40080000 {
+			pmu@40089000 {
+				compatible = "arm,cortex-a5-pmu";
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-affinity = <&a5_cpu>;
+			};
+		};
+
 	};
 };
 
diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
index 10ebe99e2751..dbca4f86fdbb 100644
--- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -14,4 +46,4 @@
 / {
 	model = "Toradex Colibri VF61 on Colibri Evaluation Board";
 	compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
-};
\ No newline at end of file
+};
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 19fe045b8334..ab4a29f95593 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2014 Toradex AG
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf610.dtsi"
@@ -18,8 +50,3 @@
 		reg = <0x80000000 0x10000000>;
 	};
 };
-
-&L2 {
-	arm,data-latency = <2 1 2>;
-	arm,tag-latency = <3 2 3>;
-};
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index 375ab23ca743..cdc100732514 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -96,6 +128,10 @@
 &clks {
 	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
 	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+	assigned-clocks = <&clks VF610_CLK_ENET_SEL>,
+			  <&clks VF610_CLK_ENET_TS_SEL>;
+	assigned-clock-parents = <&clks VF610_CLK_ENET_EXT>,
+				 <&clks VF610_CLK_ENET_EXT>;
 };
 
 &dspi0 {
@@ -237,6 +273,33 @@
 			>;
 		};
 
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				VF610_PAD_PTD31__NF_IO15	0x28df
+				VF610_PAD_PTD30__NF_IO14	0x28df
+				VF610_PAD_PTD29__NF_IO13	0x28df
+				VF610_PAD_PTD28__NF_IO12	0x28df
+				VF610_PAD_PTD27__NF_IO11	0x28df
+				VF610_PAD_PTD26__NF_IO10	0x28df
+				VF610_PAD_PTD25__NF_IO9		0x28df
+				VF610_PAD_PTD24__NF_IO8		0x28df
+				VF610_PAD_PTD23__NF_IO7		0x28df
+				VF610_PAD_PTD22__NF_IO6		0x28df
+				VF610_PAD_PTD21__NF_IO5		0x28df
+				VF610_PAD_PTD20__NF_IO4		0x28df
+				VF610_PAD_PTD19__NF_IO3		0x28df
+				VF610_PAD_PTD18__NF_IO2		0x28df
+				VF610_PAD_PTD17__NF_IO1		0x28df
+				VF610_PAD_PTD16__NF_IO0		0x28df
+				VF610_PAD_PTB24__NF_WE_B	0x28c2
+				VF610_PAD_PTB25__NF_CE0_B	0x28c2
+				VF610_PAD_PTB27__NF_RE_B	0x28c2
+				VF610_PAD_PTC26__NF_RB_B	0x283d
+				VF610_PAD_PTC27__NF_ALE		0x28c2
+				VF610_PAD_PTC28__NF_CLE		0x28c2
+			>;
+		};
+
 		pinctrl_pwm0: pwm0grp {
 			fsl,pins = <
 				VF610_PAD_PTB0__FTM0_CH0		0x1582
@@ -274,6 +337,26 @@
 	};
 };
 
+&nfc {
+	assigned-clocks = <&clks VF610_CLK_NFC>;
+	assigned-clock-rates = <33000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
+
+	nand@0 {
+		compatible = "fsl,vf610-nfc-nandcs";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-bus-width = <16>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <2048>;
+		nand-on-flash-bbt;
+	};
+};
+
 &pwm0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm0>;
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 5f8eb1bd782b..0cfc060f94d7 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf500.dtsi"
@@ -19,7 +51,7 @@
 		reg = <0x40006000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
-		arm,data-latency = <1 1 1>;
+		arm,data-latency = <3 3 3>;
 		arm,tag-latency = <2 2 2>;
 	};
 };
diff --git a/arch/arm/boot/dts/vf610m4-cosmic.dts b/arch/arm/boot/dts/vf610m4-cosmic.dts
new file mode 100644
index 000000000000..8944a2d2054c
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-cosmic.dts
@@ -0,0 +1,90 @@
+/*
+ * Device tree for Cosmic+ VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015
+ *
+ * Based on vf610m4 Colibri
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				VF610_PAD_PTA20__UART3_TX		0x21a2
+				VF610_PAD_PTA21__UART3_RX		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 6865137fd114..5c0975451d4e 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -1,10 +1,42 @@
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "vf610-pinfunc.h"
@@ -16,6 +48,8 @@
 	aliases {
 		can0 = &can0;
 		can1 = &can1;
+		ethernet0 = &fec0;
+		ethernet1 = &fec1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -158,7 +192,7 @@
 				interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
-				spi-num-chipselects = <5>;
+				spi-num-chipselects = <6>;
 				status = "disabled";
 			};
 
@@ -170,7 +204,35 @@
 				interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI1>;
 				clock-names = "dspi";
-				spi-num-chipselects = <5>;
+				spi-num-chipselects = <4>;
+				status = "disabled";
+			};
+
+			sai0: sai@4002f000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x4002f000 0x1000>;
+				interrupts = <84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI0>,
+					<&clks VF610_CLK_SAI0_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 17>,
+					<&edma0 0 16>;
+				status = "disabled";
+			};
+
+			sai1: sai@40030000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40030000 0x1000>;
+				interrupts = <85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI1>,
+					<&clks VF610_CLK_SAI1_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 19>,
+					<&edma0 0 18>;
 				status = "disabled";
 			};
 
@@ -178,14 +240,30 @@
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
 				interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_SAI2>;
-				clock-names = "sai";
+				clocks = <&clks VF610_CLK_SAI2>,
+					<&clks VF610_CLK_SAI2_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
 				dma-names = "tx", "rx";
 				dmas = <&edma0 0 21>,
 					<&edma0 0 20>;
 				status = "disabled";
 			};
 
+			sai3: sai@40032000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40032000 0x1000>;
+				interrupts = <87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_SAI3>,
+					<&clks VF610_CLK_SAI3_DIV>,
+					<&clks 0>, <&clks 0>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 1 9>,
+					<&edma0 1 8>;
+				status = "disabled";
+			};
+
 			pit: pit@40037000 {
 				compatible = "fsl,vf610-pit";
 				reg = <0x40037000 0x1000>;
@@ -453,6 +531,30 @@
 				status = "disabled";
 			};
 
+			dspi2: dspi2@400ac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ac000 0x1000>;
+				interrupts = <69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI2>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				status = "disabled";
+			};
+
+			dspi3: dspi3@400ad000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x400ad000 0x1000>;
+				interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_DSPI3>;
+				clock-names = "dspi";
+				spi-num-chipselects = <2>;
+				status = "disabled";
+			};
+
 			adc1: adc@400bb000 {
 				compatible = "fsl,vf610-adc";
 				reg = <0x400bb000 0x1000>;
@@ -461,6 +563,8 @@
 				clock-names = "adc";
 				#io-channel-cells = <1>;
 				status = "disabled";
+				fsl,adck-max-frequency = <30000000>, <40000000>,
+							<20000000>;
 			};
 
 			esdhc0: esdhc@400b1000 {
@@ -472,8 +576,6 @@
 					<&clks VF610_CLK_ESDHC0>;
 				clock-names = "ipg", "ahb", "per";
 				status = "disabled";
-				fsl,adck-max-frequency = <30000000>, <40000000>,
-							<20000000>;
 			};
 
 			esdhc1: esdhc@400b2000 {
@@ -532,6 +634,24 @@
 				status = "disabled";
 			};
 
+			dac0: dac@400cc000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cc000 1000>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC0>;
+				status = "disabled";
+			};
+
+			dac1: dac@400cd000 {
+				compatible = "fsl,vf610-dac";
+				reg = <0x400cd000 1000>;
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "dac";
+				clocks = <&clks VF610_CLK_DAC1>;
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
@@ -564,6 +684,17 @@
 				status = "disabled";
 			};
 
+			nfc: nand@400e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-nfc";
+				reg = <0x400e0000 0x4000>;
+				interrupts = <83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_NFC>;
+				clock-names = "nfc";
+				status = "disabled";
+			};
+
 			i2c2: i2c@400e6000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -592,5 +723,10 @@
 				status = "disabled";
 			};
 		};
+
+		iio-hwmon {
+			compatible = "iio-hwmon";
+			io-channels = <&adc0 16>, <&adc1 16>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index a1a854b8a454..e9ef539e13d3 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -281,8 +281,8 @@
 
 		sdhc@d800a000 {
 			compatible = "wm,wm8505-sdhc";
-			reg = <0xd800a000 0x1000>;
-			interrupts = <20 21>;
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
 			clocks = <&clksdhc>;
 			bus-width = <4>;
 		};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index b1c59a766a13..e12213d16693 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -187,6 +187,15 @@
 			interrupts = <43>;
 		};
 
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x400>;
+			interrupts = <20>, <21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
 		fb: fb@d8050800 {
 			compatible = "wm,wm8505-fb";
 			reg = <0xd8050800 0x200>;
diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi
index 557a9c2ace49..46d076d7302b 100644
--- a/arch/arm/boot/dts/wm8750.dtsi
+++ b/arch/arm/boot/dts/wm8750.dtsi
@@ -17,7 +17,7 @@
 
 		cpu {
 			device_type = "cpu";
-			compatible = "arm,arm1176ej-s";
+			compatible = "arm,arm1176jzf";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 1a5220e05109..f283ff08381c 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -19,7 +19,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
@@ -33,7 +33,7 @@
 			>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
@@ -101,6 +101,8 @@
 			#gpio-cells = <2>;
 			clocks = <&clkc 42>;
 			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&intc>;
 			interrupts = <0 20 4>;
 			reg = <0xe000a000 0x1000>;
@@ -238,7 +240,7 @@
 		slcr: slcr@f8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
 			reg = <0xF8000000 0x1000>;
 			ranges;
 			clkc: clkc@100 {
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 9efd16cb2859..307ed201d658 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -34,7 +34,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		bootargs = "earlycon root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
 		stdout-path = "serial0:115200n8";
 	};
 };
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 5df8f81f4217..e96959b2e67a 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,7 +30,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -43,14 +43,14 @@
 			label = "sw14";
 			gpios = <&gpio0 12 0>;
 			linux,code = <108>; /* down */
-			gpio-key,wakeup;
+			wakeup-source;
 			autorepeat;
 		};
 		sw13 {
 			label = "sw13";
 			gpios = <&gpio0 14 0>;
 			linux,code = <103>; /* up */
-			gpio-key,wakeup;
+			wakeup-source;
 			autorepeat;
 		};
 	};
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index abf5d238ae04..be6a986bbbd8 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -30,7 +30,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index b9f2522012e8..7250c1eac7f9 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -29,7 +29,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index 16c9cacd668d..d9e0f3e70671 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -29,10 +29,15 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 		stdout-path = "serial0:115200n8";
 	};
 
+	usb_phy0: phy0 {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio0 46 1>;
+	};
 };
 
 &clkc {
@@ -56,3 +61,9 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index c3a4e9ceba34..9353184d730d 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -17,6 +17,3 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
-
-config TI_PRIV_EDMA
-	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ee5959a813b..27f23b15b1ea 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
-obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
deleted file mode 100644
index 873dbfcc7dc9..000000000000
--- a/arch/arm/common/edma.c
+++ /dev/null
@@ -1,1876 +0,0 @@
-/*
- * EDMA3 support for DaVinci
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_dma.h>
-#include <linux/of_irq.h>
-#include <linux/pm_runtime.h>
-
-#include <linux/platform_data/edma.h>
-
-/* Offsets matching "struct edmacc_param" */
-#define PARM_OPT		0x00
-#define PARM_SRC		0x04
-#define PARM_A_B_CNT		0x08
-#define PARM_DST		0x0c
-#define PARM_SRC_DST_BIDX	0x10
-#define PARM_LINK_BCNTRLD	0x14
-#define PARM_SRC_DST_CIDX	0x18
-#define PARM_CCNT		0x1c
-
-#define PARM_SIZE		0x20
-
-/* Offsets for EDMA CC global channel registers and their shadows */
-#define SH_ER		0x00	/* 64 bits */
-#define SH_ECR		0x08	/* 64 bits */
-#define SH_ESR		0x10	/* 64 bits */
-#define SH_CER		0x18	/* 64 bits */
-#define SH_EER		0x20	/* 64 bits */
-#define SH_EECR		0x28	/* 64 bits */
-#define SH_EESR		0x30	/* 64 bits */
-#define SH_SER		0x38	/* 64 bits */
-#define SH_SECR		0x40	/* 64 bits */
-#define SH_IER		0x50	/* 64 bits */
-#define SH_IECR		0x58	/* 64 bits */
-#define SH_IESR		0x60	/* 64 bits */
-#define SH_IPR		0x68	/* 64 bits */
-#define SH_ICR		0x70	/* 64 bits */
-#define SH_IEVAL	0x78
-#define SH_QER		0x80
-#define SH_QEER		0x84
-#define SH_QEECR	0x88
-#define SH_QEESR	0x8c
-#define SH_QSER		0x90
-#define SH_QSECR	0x94
-#define SH_SIZE		0x200
-
-/* Offsets for EDMA CC global registers */
-#define EDMA_REV	0x0000
-#define EDMA_CCCFG	0x0004
-#define EDMA_QCHMAP	0x0200	/* 8 registers */
-#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
-#define EDMA_QDMAQNUM	0x0260
-#define EDMA_QUETCMAP	0x0280
-#define EDMA_QUEPRI	0x0284
-#define EDMA_EMR	0x0300	/* 64 bits */
-#define EDMA_EMCR	0x0308	/* 64 bits */
-#define EDMA_QEMR	0x0310
-#define EDMA_QEMCR	0x0314
-#define EDMA_CCERR	0x0318
-#define EDMA_CCERRCLR	0x031c
-#define EDMA_EEVAL	0x0320
-#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
-#define EDMA_QRAE	0x0380	/* 4 registers */
-#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
-#define EDMA_QSTAT	0x0600	/* 2 registers */
-#define EDMA_QWMTHRA	0x0620
-#define EDMA_QWMTHRB	0x0624
-#define EDMA_CCSTAT	0x0640
-
-#define EDMA_M		0x1000	/* global channel registers */
-#define EDMA_ECR	0x1008
-#define EDMA_ECRH	0x100C
-#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
-#define EDMA_PARM	0x4000	/* 128 param entries */
-
-#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
-
-#define EDMA_DCHMAP	0x0100  /* 64 registers */
-
-/* CCCFG register */
-#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
-#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
-#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
-#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
-#define CHMAP_EXIST		BIT(24)
-
-#define EDMA_MAX_DMACH           64
-#define EDMA_MAX_PARAMENTRY     512
-
-/*****************************************************************************/
-
-static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
-
-static inline unsigned int edma_read(unsigned ctlr, int offset)
-{
-	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
-}
-
-static inline void edma_write(unsigned ctlr, int offset, int val)
-{
-	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
-}
-static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
-		unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_and(unsigned ctlr, int offset, unsigned and)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_or(unsigned ctlr, int offset, unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
-{
-	return edma_read(ctlr, offset + (i << 2));
-}
-static inline void edma_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, offset + (i << 2), val);
-}
-static inline void edma_modify_array(unsigned ctlr, int offset, int i,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, offset + (i << 2), and, or);
-}
-static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
-{
-	edma_or(ctlr, offset + (i << 2), or);
-}
-static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned or)
-{
-	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
-}
-static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned val)
-{
-	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
-}
-static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset);
-}
-static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
-		int i)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
-}
-static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
-}
-static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
-}
-static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
-		int param_no)
-{
-	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
-}
-static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
-}
-static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
-}
-static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
-		unsigned and)
-{
-	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
-}
-static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
-		unsigned or)
-{
-	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
-}
-
-static inline void set_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		set_bit(offset + (len - 1), p);
-}
-
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		clear_bit(offset + (len - 1), p);
-}
-
-/*****************************************************************************/
-
-/* actual number of DMA channels and slots on this silicon */
-struct edma {
-	/* how many dma resources of each type */
-	unsigned	num_channels;
-	unsigned	num_region;
-	unsigned	num_slots;
-	unsigned	num_tc;
-	enum dma_event_q 	default_queue;
-
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
-
-	struct edma_soc_info *info;
-
-	/* The edma_inuse bit for each PaRAM slot is clear unless the
-	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
-	 */
-	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
-
-	/* The edma_unused bit for each channel is clear unless
-	 * it is not being used on this platform. It uses a bit
-	 * of SOC-specific initialization code.
-	 */
-	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
-
-	unsigned	irq_res_start;
-	unsigned	irq_res_end;
-
-	struct dma_interrupt_data {
-		void (*callback)(unsigned channel, unsigned short ch_status,
-				void *data);
-		void *data;
-	} intr_data[EDMA_MAX_DMACH];
-};
-
-static struct edma *edma_cc[EDMA_MAX_CC];
-static int arch_num_cc;
-
-/* dummy param set used to (re)initialize parameter RAM slots */
-static const struct edmacc_param dummy_paramset = {
-	.link_bcntrld = 0xffff,
-	.ccnt = 1,
-};
-
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
-/*****************************************************************************/
-
-static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
-		enum dma_event_q queue_no)
-{
-	int bit = (ch_no & 0x7) * 4;
-
-	/* default to low priority queue */
-	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_cc[ctlr]->default_queue;
-
-	queue_no &= 7;
-	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
-			~(0x7 << bit), queue_no << bit);
-}
-
-static void assign_priority_to_queue(unsigned ctlr, int queue_no,
-		int priority)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
-			((priority & 0x7) << bit));
-}
-
-/**
- * map_dmach_param - Maps channel number to param entry number
- *
- * This maps the dma channel number to param entry numberter. In
- * other words using the DMA channel mapping registers a param entry
- * can be mapped to any channel
- *
- * Callers are responsible for ensuring the channel mapping logic is
- * included in that particular EDMA variant (Eg : dm646x)
- *
- */
-static void map_dmach_param(unsigned ctlr)
-{
-	int i;
-	for (i = 0; i < EDMA_MAX_DMACH; i++)
-		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
-}
-
-static inline void
-setup_dma_interrupt(unsigned lch,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(lch);
-	lch = EDMA_CHAN_SLOT(lch);
-
-	if (!callback)
-		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				BIT(lch & 0x1f));
-
-	edma_cc[ctlr]->intr_data[lch].callback = callback;
-	edma_cc[ctlr]->intr_data[lch].data = data;
-
-	if (callback) {
-		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				BIT(lch & 0x1f));
-		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				BIT(lch & 0x1f));
-	}
-}
-
-static int irq2ctlr(int irq)
-{
-	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
-		return 0;
-	else if (irq >= edma_cc[1]->irq_res_start &&
-		irq <= edma_cc[1]->irq_res_end)
-		return 1;
-
-	return -1;
-}
-
-/******************************************************************************
- *
- * DMA interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_irq_handler(int irq, void *data)
-{
-	int ctlr;
-	u32 sh_ier;
-	u32 sh_ipr;
-	u32 bank;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_irq_handler\n");
-
-	sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
-	if (!sh_ipr) {
-		sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
-		if (!sh_ipr)
-			return IRQ_NONE;
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
-		bank = 1;
-	} else {
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
-		bank = 0;
-	}
-
-	do {
-		u32 slot;
-		u32 channel;
-
-		dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
-
-		slot = __ffs(sh_ipr);
-		sh_ipr &= ~(BIT(slot));
-
-		if (sh_ier & BIT(slot)) {
-			channel = (bank << 5) | slot;
-			/* Clear the corresponding IPR bits */
-			edma_shadow0_write_array(ctlr, SH_ICR, bank,
-					BIT(slot));
-			if (edma_cc[ctlr]->intr_data[channel].callback)
-				edma_cc[ctlr]->intr_data[channel].callback(
-					channel, EDMA_DMA_COMPLETE,
-					edma_cc[ctlr]->intr_data[channel].data);
-		}
-	} while (sh_ipr);
-
-	edma_shadow0_write(ctlr, SH_IEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * DMA error interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_ccerr_handler(int irq, void *data)
-{
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_ccerr_handler\n");
-
-	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-	    (edma_read(ctlr, EDMA_CCERR) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j = -1;
-		if (edma_read_array(ctlr, EDMA_EMR, 0))
-			j = 0;
-		else if (edma_read_array(ctlr, EDMA_EMR, 1))
-			j = 1;
-		if (j >= 0) {
-			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(ctlr, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
-				int k = (j << 5) + i;
-				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(ctlr, EDMA_EMCR, j,
-							BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, BIT(i));
-					if (edma_cc[ctlr]->intr_data[k].
-								callback) {
-						edma_cc[ctlr]->intr_data[k].
-						callback(k,
-						EDMA_DMA_CC_ERROR,
-						edma_cc[ctlr]->intr_data
-						[k].data);
-					}
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_QEMR)) {
-			dev_dbg(data, "QEMR %02x\n",
-				edma_read(ctlr, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(ctlr, SH_QSECR,
-								BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_CCERR)) {
-			dev_dbg(data, "CCERR %08x\n",
-				edma_read(ctlr, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-		    (edma_read(ctlr, EDMA_CCERR) == 0))
-			break;
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_write(ctlr, EDMA_EEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
-				     unsigned int num_slots,
-				     unsigned int start_slot)
-{
-	int i, j;
-	unsigned int count = num_slots;
-	int stop_slot = start_slot;
-	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
-	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
-		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
-			/* Record our current beginning slot */
-			if (count == num_slots)
-				stop_slot = i;
-
-			count--;
-			set_bit(j, tmp_inuse);
-
-			if (count == 0)
-				break;
-		} else {
-			clear_bit(j, tmp_inuse);
-
-			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
-				stop_slot = i;
-				break;
-			} else {
-				count = num_slots;
-			}
-		}
-	}
-
-	/*
-	 * We have to clear any bits that we set
-	 * if we run out parameter RAM slots, i.e we do find a set
-	 * of contiguous parameter RAM slots but do not find the exact number
-	 * requested as we may reach the total number of parameter RAM slots
-	 */
-	if (i == edma_cc[ctlr]->num_slots)
-		stop_slot = i;
-
-	j = start_slot;
-	for_each_set_bit_from(j, tmp_inuse, stop_slot)
-		clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
-	if (count)
-		return -EBUSY;
-
-	for (j = i - num_slots + 1; j <= i; ++j)
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
-static int prepare_unused_channel_list(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int i, count, ctlr;
-	struct of_phandle_args  dma_spec;
-
-	if (dev->of_node) {
-		count = of_property_count_strings(dev->of_node, "dma-names");
-		if (count < 0)
-			return 0;
-		for (i = 0; i < count; i++) {
-			if (of_parse_phandle_with_args(dev->of_node, "dmas",
-						       "#dma-cells", i,
-						       &dma_spec))
-				continue;
-
-			if (!of_match_node(edma_of_ids, dma_spec.np)) {
-				of_node_put(dma_spec.np);
-				continue;
-			}
-
-			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
-				  edma_cc[0]->edma_unused);
-			of_node_put(dma_spec.np);
-		}
-		return 0;
-	}
-
-	/* For non-OF case */
-	for (i = 0; i < pdev->num_resources; i++) {
-		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
-				(int)pdev->resource[i].start >= 0) {
-			ctlr = EDMA_CTLR(pdev->resource[i].start);
-			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-				  edma_cc[ctlr]->edma_unused);
-		}
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-static bool unused_chan_list_done;
-
-/* Resource alloc/free:  dma channels, parameter RAM slots */
-
-/**
- * edma_alloc_channel - allocate DMA channel and paired parameter RAM
- * @channel: specific channel to allocate; negative for "any unmapped channel"
- * @callback: optional; to be issued on DMA completion or errors
- * @data: passed to callback
- * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
- *	Controller (TC) executes requests using this channel.  Use
- *	EVENTQ_DEFAULT unless you really need a high priority queue.
- *
- * This allocates a DMA channel and its associated parameter RAM slot.
- * The parameter RAM is initialized to hold a dummy transfer.
- *
- * Normal use is to pass a specific channel number as @channel, to make
- * use of hardware events mapped to that channel.  When the channel will
- * be used only for software triggering or event chaining, channels not
- * mapped to hardware events (or mapped to unused events) are preferable.
- *
- * DMA transfers start from a channel using edma_start(), or by
- * chaining.  When the transfer described in that channel's parameter RAM
- * slot completes, that slot's data may be reloaded through a link.
- *
- * DMA errors are only reported to the @callback associated with the
- * channel driving that transfer, but transfer completion callbacks can
- * be sent to another channel under control of the TCC field in
- * the option word of the transfer's parameter RAM set.  Drivers must not
- * use DMA transfer completion callbacks for channels they did not allocate.
- * (The same applies to TCC codes used in transfer chaining.)
- *
- * Returns the number of the channel, else negative errno.
- */
-int edma_alloc_channel(int channel,
-		void (*callback)(unsigned channel, u16 ch_status, void *data),
-		void *data,
-		enum dma_event_q eventq_no)
-{
-	unsigned i, done = 0, ctlr = 0;
-	int ret = 0;
-
-	if (!unused_chan_list_done) {
-		/*
-		 * Scan all the platform devices to find out the EDMA channels
-		 * used and clear them in the unused list, making the rest
-		 * available for ARM usage.
-		 */
-		ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
-				prepare_unused_channel_list);
-		if (ret < 0)
-			return ret;
-
-		unused_chan_list_done = true;
-	}
-
-	if (channel >= 0) {
-		ctlr = EDMA_CTLR(channel);
-		channel = EDMA_CHAN_SLOT(channel);
-	}
-
-	if (channel < 0) {
-		for (i = 0; i < arch_num_cc; i++) {
-			channel = 0;
-			for (;;) {
-				channel = find_next_bit(edma_cc[i]->edma_unused,
-						edma_cc[i]->num_channels,
-						channel);
-				if (channel == edma_cc[i]->num_channels)
-					break;
-				if (!test_and_set_bit(channel,
-						edma_cc[i]->edma_inuse)) {
-					done = 1;
-					ctlr = i;
-					break;
-				}
-				channel++;
-			}
-			if (done)
-				break;
-		}
-		if (!done)
-			return -ENOMEM;
-	} else if (channel >= edma_cc[ctlr]->num_channels) {
-		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
-
-	/* ensure no events are pending */
-	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-
-	if (callback)
-		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
-					callback, data);
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-
-	return EDMA_CTLR_CHAN(ctlr, channel);
-}
-EXPORT_SYMBOL(edma_alloc_channel);
-
-
-/**
- * edma_free_channel - deallocate DMA channel
- * @channel: dma channel returned from edma_alloc_channel()
- *
- * This deallocates the DMA channel and associated parameter RAM slot
- * allocated by edma_alloc_channel().
- *
- * Callers are responsible for ensuring the channel is inactive, and
- * will not be reactivated by linking, chaining, or software calls to
- * edma_start().
- */
-void edma_free_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	setup_dma_interrupt(channel, NULL, NULL);
-	/* REVISIT should probably take out of shadow region 0 */
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_channel);
-
-/**
- * edma_alloc_slot - allocate DMA parameter RAM
- * @slot: specific slot to allocate; negative for "any unused slot"
- *
- * This allocates a parameter RAM slot, initializing it to hold a
- * dummy transfer.  Slots allocated using this routine have not been
- * mapped to a hardware DMA channel, and will normally be used by
- * linking to them from a slot associated with a DMA channel.
- *
- * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
- * slots may be allocated on behalf of DSP firmware.
- *
- * Returns the number of the slot, else negative errno.
- */
-int edma_alloc_slot(unsigned ctlr, int slot)
-{
-	if (!edma_cc[ctlr])
-		return -EINVAL;
-
-	if (slot >= 0)
-		slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < 0) {
-		slot = edma_cc[ctlr]->num_channels;
-		for (;;) {
-			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
-					edma_cc[ctlr]->num_slots, slot);
-			if (slot == edma_cc[ctlr]->num_slots)
-				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
-				break;
-		}
-	} else if (slot < edma_cc[ctlr]->num_channels ||
-			slot >= edma_cc[ctlr]->num_slots) {
-		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, slot);
-}
-EXPORT_SYMBOL(edma_alloc_slot);
-
-/**
- * edma_free_slot - deallocate DMA parameter RAM
- * @slot: parameter RAM slot returned from edma_alloc_slot()
- *
- * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
- * Callers are responsible for ensuring the slot is inactive, and will
- * not be activated.
- */
-void edma_free_slot(unsigned slot)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots)
-		return;
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_slot);
-
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot  - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
-	/*
-	 * The start slot requested should be greater than
-	 * the number of channels and lesser than the total number
-	 * of slots
-	 */
-	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots))
-		return -EINVAL;
-
-	/*
-	 * The number of parameter RAM slots requested cannot be less than 1
-	 * and cannot be more than the number of slots minus the number of
-	 * channels
-	 */
-	if (count < 1 || count >
-		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
-		return -EINVAL;
-
-	switch (id) {
-	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_cc[ctlr]->num_channels);
-	case EDMA_CONT_PARAMS_FIXED_EXACT:
-	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_slots(ctlr, id, count, slot);
-	default:
-		return -EINVAL;
-	}
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
-	unsigned ctlr, slot_to_free;
-	int i;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots ||
-		count < 1)
-		return -EINVAL;
-
-	for (i = slot; i < slot + count; ++i) {
-		ctlr = EDMA_CTLR(i);
-		slot_to_free = EDMA_CHAN_SLOT(i);
-
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
-			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (i) -- read/write partial slots */
-
-/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set SAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
-		} else {
-			/* clear SAM */
-			i &= ~SAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-
-		/* set the source port address
-		   in source register of param structure */
-		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set DAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
-		} else {
-			/* clear DAM */
-			i &= ~DAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-		/* set the destination port address
-		   in dest register of param structure */
-		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest);
-
-/**
- * edma_get_position - returns the current transfer point
- * @slot: parameter RAM slot being examined
- * @dst:  true selects the dest position, false the source
- *
- * Returns the position of the current active slot
- */
-dma_addr_t edma_get_position(unsigned slot, bool dst)
-{
-	u32 offs, ctlr = EDMA_CTLR(slot);
-
-	slot = EDMA_CHAN_SLOT(slot);
-
-	offs = PARM_OFFSET(slot);
-	offs += dst ? PARM_DST : PARM_SRC;
-
-	return edma_read(ctlr, offs);
-}
-
-/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0xffff0000, src_bidx);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0xffff0000, src_cidx);
-	}
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0x0000ffff, dest_cidx << 16);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- *	the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots.  If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register.  In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO.  It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
-		u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
-				0x0000ffff, bcnt_rld << 16);
-		if (sync_mode == ASYNC)
-			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
-		else
-			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
-		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
-	}
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
-/**
- * edma_link - link one parameter RAM slot to another
- * @from: parameter RAM slot originating the link
- * @to: parameter RAM slot which is the link target
- *
- * The originating slot should not be part of any active DMA transfer.
- */
-void edma_link(unsigned from, unsigned to)
-{
-	unsigned ctlr_from, ctlr_to;
-
-	ctlr_from = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-	ctlr_to = EDMA_CTLR(to);
-	to = EDMA_CHAN_SLOT(to);
-
-	if (from >= edma_cc[ctlr_from]->num_slots)
-		return;
-	if (to >= edma_cc[ctlr_to]->num_slots)
-		return;
-	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
-				PARM_OFFSET(to));
-}
-EXPORT_SYMBOL(edma_link);
-
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-
-	if (from >= edma_cc[ctlr]->num_slots)
-		return;
-	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (ii) -- read/write whole parameter sets */
-
-/**
- * edma_write_slot - write parameter RAM data for slot
- * @slot: number of parameter RAM slot being modified
- * @param: data to be written into parameter RAM slot
- *
- * Use this to assign all parameters of a transfer at once.  This
- * allows more efficient setup of transfers than issuing multiple
- * calls to set up those parameters in small pieces, and provides
- * complete control over all transfer options.
- */
-void edma_write_slot(unsigned slot, const struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_write_slot);
-
-/**
- * edma_read_slot - read parameter RAM data from slot
- * @slot: number of parameter RAM slot being copied
- * @param: where to store copy of parameter RAM data
- *
- * Use this to read data from a parameter RAM slot, perhaps to
- * save them as a template for later reuse.
- */
-void edma_read_slot(unsigned slot, struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_read_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Various EDMA channel control operations */
-
-/**
- * edma_pause - pause dma on a channel
- * @channel: on which edma_start() has been called
- *
- * This temporarily disables EDMA hardware events on the specified channel,
- * preventing them from triggering new transfers on its behalf
- */
-void edma_pause(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_pause);
-
-/**
- * edma_resume - resumes dma on a paused channel
- * @channel: on which edma_pause() has been called
- *
- * This re-enables EDMA hardware events on the specified channel.
- */
-void edma_resume(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_resume);
-
-int edma_trigger_channel(unsigned channel)
-{
-	unsigned ctlr;
-	unsigned int mask;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-	mask = BIT(channel & 0x1f);
-
-	edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask);
-
-	pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
-		 edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5)));
-	return 0;
-}
-EXPORT_SYMBOL(edma_trigger_channel);
-
-/**
- * edma_start - start dma on a channel
- * @channel: channel being activated
- *
- * Channels with event associations will be triggered by their hardware
- * events, and channels without such associations will be triggered by
- * software.  (At this writing there is no interface for using software
- * triggers except with channels that don't support hardware triggers.)
- *
- * Returns zero on success, else negative errno.
- */
-int edma_start(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		/* EDMA channels without event association */
-		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
-			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_ESR, j));
-			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
-			return 0;
-		}
-
-		/* EDMA channel with event association */
-		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending event or error */
-		edma_write_array(ctlr, EDMA_ECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
-		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_EER, j));
-		return 0;
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(edma_start);
-
-/**
- * edma_stop - stops dma on the channel passed
- * @channel: channel being deactivated
- *
- * When @lch is a channel, any active transfer is paused and
- * all pending hardware events are cleared.  The current transfer
- * may not be resumed, and the channel's Parameter RAM should be
- * reinitialized before being reused.
- */
-void edma_stop(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-
-		/* clear possibly pending completion interrupt */
-		edma_shadow0_write_array(ctlr, SH_ICR, j, mask);
-
-		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_EER, j));
-
-		/* REVISIT:  consider guarding against inappropriate event
-		 * chaining by overwriting with dummy_paramset.
-		 */
-	}
-}
-EXPORT_SYMBOL(edma_stop);
-
-/******************************************************************************
- *
- * It cleans ParamEntry qand bring back EDMA to initial state if media has
- * been removed before EDMA has finished.It is usedful for removable media.
- * Arguments:
- *      ch_no     - channel no
- *
- * Return: zero on success, or corresponding error no on failure
- *
- * FIXME this should not be needed ... edma_stop() should suffice.
- *
- *****************************************************************************/
-
-void edma_clean_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = (channel >> 5);
-		unsigned int mask = BIT(channel & 0x1f);
-
-		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(ctlr, EDMA_EMR, j));
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		/* Clear the corresponding EMR bits */
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
-	}
-}
-EXPORT_SYMBOL(edma_clean_channel);
-
-/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- *	channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, BIT(channel));
-	else
-		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
-/*
- * edma_assign_channel_eventq - move given channel to desired eventq
- * Arguments:
- *	channel - channel number
- *	eventq_no - queue to move the channel
- *
- * Can be used to move a channel to a selected event queue.
- */
-void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	/* default to low priority queue */
-	if (eventq_no == EVENTQ_DEFAULT)
-		eventq_no = edma_cc[ctlr]->default_queue;
-	if (eventq_no >= edma_cc[ctlr]->num_tc)
-		return;
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-}
-EXPORT_SYMBOL(edma_assign_channel_eventq);
-
-static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
-			      struct edma *edma_cc, int cc_id)
-{
-	int i;
-	u32 value, cccfg;
-	s8 (*queue_priority_map)[2];
-
-	/* Decode the eDMA3 configuration from CCCFG register */
-	cccfg = edma_read(cc_id, EDMA_CCCFG);
-
-	value = GET_NUM_REGN(cccfg);
-	edma_cc->num_region = BIT(value);
-
-	value = GET_NUM_DMACH(cccfg);
-	edma_cc->num_channels = BIT(value + 1);
-
-	value = GET_NUM_PAENTRY(cccfg);
-	edma_cc->num_slots = BIT(value + 4);
-
-	value = GET_NUM_EVQUE(cccfg);
-	edma_cc->num_tc = value + 1;
-
-	dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
-		cccfg);
-	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
-	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
-	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
-	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
-
-	/* Nothing need to be done if queue priority is provided */
-	if (pdata->queue_priority_mapping)
-		return 0;
-
-	/*
-	 * Configure TC/queue priority as follows:
-	 * Q0 - priority 0
-	 * Q1 - priority 1
-	 * Q2 - priority 2
-	 * ...
-	 * The meaning of priority numbers: 0 highest priority, 7 lowest
-	 * priority. So Q0 is the highest priority queue and the last queue has
-	 * the lowest priority.
-	 */
-	queue_priority_map = devm_kzalloc(dev,
-					  (edma_cc->num_tc + 1) * sizeof(s8),
-					  GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < edma_cc->num_tc; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-	/* Default queue has the lowest priority */
-	pdata->default_queue = i - 1;
-
-	return 0;
-}
-
-#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
-
-static int edma_xbar_event_map(struct device *dev, struct device_node *node,
-			       struct edma_soc_info *pdata, size_t sz)
-{
-	const char pname[] = "ti,edma-xbar-event-map";
-	struct resource res;
-	void __iomem *xbar;
-	s16 (*xbar_chans)[2];
-	size_t nelm = sz / sizeof(s16);
-	u32 shift, offset, mux;
-	int ret, i;
-
-	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
-	if (!xbar_chans)
-		return -ENOMEM;
-
-	ret = of_address_to_resource(node, 1, &res);
-	if (ret)
-		return -ENOMEM;
-
-	xbar = devm_ioremap(dev, res.start, resource_size(&res));
-	if (!xbar)
-		return -ENOMEM;
-
-	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
-	if (ret)
-		return -EIO;
-
-	/* Invalidate last entry for the other user of this mess */
-	nelm >>= 1;
-	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
-
-	for (i = 0; i < nelm; i++) {
-		shift = (xbar_chans[i][1] & 0x03) << 3;
-		offset = xbar_chans[i][1] & 0xfffffffc;
-		mux = readl(xbar + offset);
-		mux &= ~(0xff << shift);
-		mux |= xbar_chans[i][0] << shift;
-		writel(mux, (xbar + offset));
-	}
-
-	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
-	return 0;
-}
-
-static int edma_of_parse_dt(struct device *dev,
-			    struct device_node *node,
-			    struct edma_soc_info *pdata)
-{
-	int ret = 0;
-	struct property *prop;
-	size_t sz;
-	struct edma_rsv_info *rsv_info;
-
-	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
-	if (!rsv_info)
-		return -ENOMEM;
-	pdata->rsv = rsv_info;
-
-	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
-	if (prop)
-		ret = edma_xbar_event_map(dev, node, pdata, sz);
-
-	return ret;
-}
-
-static struct of_dma_filter_info edma_filter_info = {
-	.filter_fn = edma_filter_fn,
-};
-
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	struct edma_soc_info *info;
-	int ret;
-
-	info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
-	if (!info)
-		return ERR_PTR(-ENOMEM);
-
-	ret = edma_of_parse_dt(dev, node, info);
-	if (ret)
-		return ERR_PTR(ret);
-
-	dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
-	dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
-	of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
-				   &edma_filter_info);
-
-	return info;
-}
-#else
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	return ERR_PTR(-ENOSYS);
-}
-#endif
-
-static int edma_probe(struct platform_device *pdev)
-{
-	struct edma_soc_info	**info = pdev->dev.platform_data;
-	struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
-	s8		(*queue_priority_mapping)[2];
-	int			i, j, off, ln, found = 0;
-	int			status = -1;
-	const s16		(*rsv_chans)[2];
-	const s16		(*rsv_slots)[2];
-	const s16		(*xbar_chans)[2];
-	int			irq[EDMA_MAX_CC] = {0, 0};
-	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
-	struct resource		res[EDMA_MAX_CC];
-	char			res_name[10];
-	struct device_node	*node = pdev->dev.of_node;
-	struct device		*dev = &pdev->dev;
-	int			ret;
-	struct platform_device_info edma_dev_info = {
-		.name = "edma-dma-engine",
-		.dma_mask = DMA_BIT_MASK(32),
-		.parent = &pdev->dev,
-	};
-
-	if (node) {
-		/* Check if this is a second instance registered */
-		if (arch_num_cc) {
-			dev_err(dev, "only one EDMA instance is supported via DT\n");
-			return -ENODEV;
-		}
-
-		ninfo[0] = edma_setup_info_from_dt(dev, node);
-		if (IS_ERR(ninfo[0])) {
-			dev_err(dev, "failed to get DT data\n");
-			return PTR_ERR(ninfo[0]);
-		}
-
-		info = ninfo;
-	}
-
-	if (!info)
-		return -ENODEV;
-
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
-	for (j = 0; j < EDMA_MAX_CC; j++) {
-		if (!info[j]) {
-			if (!found)
-				return -ENODEV;
-			break;
-		}
-		if (node) {
-			ret = of_address_to_resource(node, j, &res[j]);
-			if (!ret)
-				r[j] = &res[j];
-		} else {
-			sprintf(res_name, "edma_cc%d", j);
-			r[j] = platform_get_resource_byname(pdev,
-						IORESOURCE_MEM,
-						res_name);
-		}
-		if (!r[j]) {
-			if (found)
-				break;
-			else
-				return -ENODEV;
-		} else {
-			found = 1;
-		}
-
-		edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]);
-		if (IS_ERR(edmacc_regs_base[j]))
-			return PTR_ERR(edmacc_regs_base[j]);
-
-		edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma),
-					  GFP_KERNEL);
-		if (!edma_cc[j])
-			return -ENOMEM;
-
-		/* Get eDMA3 configuration from IP */
-		ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
-		if (ret)
-			return ret;
-
-		edma_cc[j]->default_queue = info[j]->default_queue;
-
-		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
-			edmacc_regs_base[j]);
-
-		for (i = 0; i < edma_cc[j]->num_slots; i++)
-			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
-					&dummy_paramset, PARM_SIZE);
-
-		/* Mark all channels as unused */
-		memset(edma_cc[j]->edma_unused, 0xff,
-			sizeof(edma_cc[j]->edma_unused));
-
-		if (info[j]->rsv) {
-
-			/* Clear the reserved channels in unused list */
-			rsv_chans = info[j]->rsv->rsv_chans;
-			if (rsv_chans) {
-				for (i = 0; rsv_chans[i][0] != -1; i++) {
-					off = rsv_chans[i][0];
-					ln = rsv_chans[i][1];
-					clear_bits(off, ln,
-						  edma_cc[j]->edma_unused);
-				}
-			}
-
-			/* Set the reserved slots in inuse list */
-			rsv_slots = info[j]->rsv->rsv_slots;
-			if (rsv_slots) {
-				for (i = 0; rsv_slots[i][0] != -1; i++) {
-					off = rsv_slots[i][0];
-					ln = rsv_slots[i][1];
-					set_bits(off, ln,
-						edma_cc[j]->edma_inuse);
-				}
-			}
-		}
-
-		/* Clear the xbar mapped channels in unused list */
-		xbar_chans = info[j]->xbar_chans;
-		if (xbar_chans) {
-			for (i = 0; xbar_chans[i][1] != -1; i++) {
-				off = xbar_chans[i][1];
-				clear_bits(off, 1,
-					   edma_cc[j]->edma_unused);
-			}
-		}
-
-		if (node) {
-			irq[j] = irq_of_parse_and_map(node, 0);
-			err_irq[j] = irq_of_parse_and_map(node, 2);
-		} else {
-			char irq_name[10];
-
-			sprintf(irq_name, "edma%d", j);
-			irq[j] = platform_get_irq_byname(pdev, irq_name);
-
-			sprintf(irq_name, "edma%d_err", j);
-			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		}
-		edma_cc[j]->irq_res_start = irq[j];
-		edma_cc[j]->irq_res_end = err_irq[j];
-
-		status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
-					  "edma", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				irq[j], status);
-			return status;
-		}
-
-		status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
-					  "edma_error", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				err_irq[j], status);
-			return status;
-		}
-
-		for (i = 0; i < edma_cc[j]->num_channels; i++)
-			map_dmach_queue(j, i, info[j]->default_queue);
-
-		queue_priority_mapping = info[j]->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						queue_priority_mapping[i][0],
-						queue_priority_mapping[i][1]);
-
-		/* Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < edma_cc[j]->num_region; i++) {
-			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
-			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
-			edma_write_array(j, EDMA_QRAE, i, 0x0);
-		}
-		edma_cc[j]->info = info[j];
-		arch_num_cc++;
-
-		edma_dev_info.id = j;
-		platform_device_register_full(&edma_dev_info);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int edma_pm_resume(struct device *dev)
-{
-	int i, j;
-
-	for (j = 0; j < arch_num_cc; j++) {
-		struct edma *cc = edma_cc[j];
-
-		s8 (*queue_priority_mapping)[2];
-
-		queue_priority_mapping = cc->info->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						 queue_priority_mapping[i][0],
-						 queue_priority_mapping[i][1]);
-
-		/*
-		 * Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < cc->num_channels; i++) {
-			if (test_bit(i, cc->edma_inuse)) {
-				/* ensure access through shadow region 0 */
-				edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
-					       BIT(i & 0x1f));
-
-				setup_dma_interrupt(i,
-						    cc->intr_data[i].callback,
-						    cc->intr_data[i].data);
-			}
-		}
-	}
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops edma_pm_ops = {
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume)
-};
-
-static struct platform_driver edma_driver = {
-	.driver = {
-		.name	= "edma",
-		.pm	= &edma_pm_ops,
-		.of_match_table = edma_of_ids,
-	},
-	.probe = edma_probe,
-};
-
-static int __init edma_init(void)
-{
-	return platform_driver_probe(&edma_driver, edma_probe);
-}
-arch_initcall(edma_init);
-
diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c
index 2dc6da70ae59..d7ed252708c5 100644
--- a/arch/arm/common/icst.c
+++ b/arch/arm/common/icst.c
@@ -16,7 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>
 
 /*
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
 
 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }
 
 EXPORT_SYMBOL(icst_hz);
@@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
index 2b25b6038f66..c773157646d3 100644
--- a/arch/arm/common/mcpm_platsmp.c
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -83,7 +83,7 @@ static void mcpm_cpu_die(unsigned int cpu)
 
 #endif
 
-static struct smp_operations __initdata mcpm_smp_ops = {
+static const struct smp_operations mcpm_smp_ops __initconst = {
 	.smp_boot_secondary	= mcpm_boot_secondary,
 	.smp_secondary_init	= mcpm_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 3d224941b541..fb0a0a4dfea4 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1290,7 +1290,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 	struct sa1111_driver *drv = SA1111_DRV(_drv);
 
-	return dev->devid & drv->devid;
+	return !!(dev->devid & drv->devid);
 }
 
 static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 45f4c21e393c..9ba45ade5f48 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -69,7 +69,7 @@ static void __scoop_gpio_set(struct scoop_dev *sdev,
 
 static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	spin_lock_irqsave(&sdev->scoop_lock, flags);
@@ -81,16 +81,16 @@ static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 
 	/* XXX: I'm unsure, but it seems so */
-	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
+	return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)));
 }
 
 static int scoop_gpio_direction_input(struct gpio_chip *chip,
 			unsigned offset)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
 	unsigned short gpcr;
 
@@ -108,7 +108,7 @@ static int scoop_gpio_direction_input(struct gpio_chip *chip,
 static int scoop_gpio_direction_output(struct gpio_chip *chip,
 			unsigned offset, int value)
 {
-	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
 	unsigned long flags;
 	unsigned short gpcr;
 
@@ -224,7 +224,7 @@ static int scoop_probe(struct platform_device *pdev)
 		devptr->gpio.direction_input = scoop_gpio_direction_input;
 		devptr->gpio.direction_output = scoop_gpio_direction_output;
 
-		ret = gpiochip_add(&devptr->gpio);
+		ret = gpiochip_add_data(&devptr->gpio, devptr);
 		if (ret)
 			goto err_gpio;
 	}
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 090c5b25dbed..e4b1be66b3f5 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -17,7 +17,6 @@ CONFIG_ARCH_MULTI_V4T=y
 CONFIG_ARCH_MULTI_V5=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_AT91=y
-CONFIG_SOC_SAM_V4_V5=y
 CONFIG_SOC_AT91RM9200=y
 CONFIG_SOC_AT91SAM9=y
 CONFIG_AEABI=y
@@ -28,7 +27,6 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -43,7 +41,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
@@ -119,7 +116,6 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
 CONFIG_I2C_AT91=y
 CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
@@ -129,7 +125,6 @@ CONFIG_POWER_RESET=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SSB=m
 CONFIG_MFD_ATMEL_HLCDC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -142,16 +137,12 @@ CONFIG_SOC_CAMERA_OV2640=m
 CONFIG_DRM=y
 CONFIG_DRM_ATMEL_HLCDC=y
 CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -216,18 +207,11 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=m
-CONFIG_AVERAGE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 31cb07388885..1ef69fcbdf2e 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -6,22 +6,17 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_PERF=y
-CONFIG_CFS_BANDWIDTH=y
-CONFIG_RT_GROUP_SCHED=y
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
@@ -29,8 +24,8 @@ CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
 CONFIG_ARCH_MULTI_V6=y
-# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
 CONFIG_PREEMPT_VOLUNTARY=y
@@ -38,7 +33,6 @@ CONFIG_AEABI=y
 CONFIG_KSM=y
 CONFIG_CLEANCACHE=y
 CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
 CONFIG_VFP=y
@@ -57,7 +51,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
@@ -75,19 +68,30 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BCM2835=y
 CONFIG_SPI=y
 CONFIG_SPI_BCM2835=y
+CONFIG_SPI_BCM2835AUX=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
 CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -96,17 +100,21 @@ CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=y
 CONFIG_STAGING=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
+CONFIG_MAILBOX=y
+CONFIG_BCM2835_MBOX=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -135,7 +143,5 @@ CONFIG_TEST_KSTRTOX=y
 CONFIG_KGDB=y
 CONFIG_KGDB_KDB=y
 CONFIG_STRICT_DEVMEM=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_XZ_DEC_ARM is not set
 # CONFIG_XZ_DEC_ARMTHUMB is not set
diff --git a/arch/arm/configs/bockw_defconfig b/arch/arm/configs/bockw_defconfig
deleted file mode 100644
index 3125e00f05ab..000000000000
--- a/arch/arm/configs/bockw_defconfig
+++ /dev/null
@@ -1,133 +0,0 @@
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_KERNEL_LZMA=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_MACH_BOCKW=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ=1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_EM_TIMER_STI is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_I2C=y
-CONFIG_I2C_RCAR=y
-CONFIG_GPIO_RCAR=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ML86V7667=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_HSPI=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RCAR=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_RCAR_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_DMADEVICES=y
-CONFIG_RCAR_HPB_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_SWAP=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_AVERAGE=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 18c311ae1113..0b9211b2b73b 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -166,7 +166,6 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA1=m
diff --git a/arch/arm/configs/dram_0x00000000.config b/arch/arm/configs/dram_0x00000000.config
new file mode 100644
index 000000000000..db96dcb420ce
--- /dev/null
+++ b/arch/arm/configs/dram_0x00000000.config
@@ -0,0 +1 @@
+CONFIG_DRAM_BASE=0x00000000
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index a7846d64b396..158dde87f5d0 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -132,6 +132,5 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_PL01X=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 13ba48c4b03b..6ffd7e76f3ce 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -7,7 +7,6 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_EXYNOS3=y
@@ -27,12 +26,14 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,7 +45,6 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_CFG80211=y
 CONFIG_RFKILL_REGULATOR=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
@@ -61,11 +61,12 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=m
 CONFIG_NETDEVICES=y
 CONFIG_SMSC911X=y
+CONFIG_USB_RTL8152=y
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
-CONFIG_MWIFIEX=y
-CONFIG_MWIFIEX_SDIO=y
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_CROS_EC=y
@@ -73,6 +74,9 @@ CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_CYAPA=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MAX77693_HAPTIC=y
+CONFIG_INPUT_MAX8997_HAPTIC=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
@@ -86,6 +90,7 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
 CONFIG_SPI_S3C64XX=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_POWER_SUPPLY=y
@@ -94,6 +99,7 @@ CONFIG_BATTERY_MAX17040=y
 CONFIG_BATTERY_MAX17042=y
 CONFIG_CHARGER_MAX14577=y
 CONFIG_CHARGER_MAX77693=y
+CONFIG_CHARGER_MAX8997=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_NTC_THERMISTOR=y
@@ -112,6 +118,7 @@ CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8997=y
+CONFIG_MFD_MAX8998=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_TPS65090=y
 CONFIG_REGULATOR=y
@@ -119,6 +126,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX14577=y
 CONFIG_REGULATOR_MAX8997=y
+CONFIG_REGULATOR_MAX8998=y
 CONFIG_REGULATOR_MAX77686=y
 CONFIG_REGULATOR_MAX77693=y
 CONFIG_REGULATOR_MAX77802=y
@@ -126,16 +134,22 @@ CONFIG_REGULATOR_S2MPA01=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
 CONFIG_REGULATOR_TPS65090=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
 CONFIG_DRM=y
 CONFIG_DRM_NXP_PTN3460=y
 CONFIG_DRM_PARADE_PS8622=y
 CONFIG_DRM_EXYNOS=y
 CONFIG_DRM_EXYNOS_FIMD=y
 CONFIG_DRM_EXYNOS_DSI=y
+CONFIG_DRM_EXYNOS_MIXER=y
+CONFIG_DRM_EXYNOS_DPI=y
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_PANEL_SAMSUNG_LD9040=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
-CONFIG_FB_SIMPLE=y
 CONFIG_EXYNOS_VIDEO=y
 CONFIG_EXYNOS_MIPI_DSI=y
 CONFIG_LCD_CLASS_DEVICE=y
@@ -158,8 +172,10 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
@@ -167,9 +183,18 @@ CONFIG_MMC_SDHCI_S3C=y
 CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_MAX77693=y
+CONFIG_LEDS_MAX8997=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX8997=y
 CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_MAX77802=y
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
@@ -182,6 +207,7 @@ CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_EXTCON=y
 CONFIG_EXTCON_MAX14577=y
 CONFIG_EXTCON_MAX77693=y
+CONFIG_EXTCON_MAX8997=y
 CONFIG_IIO=y
 CONFIG_EXYNOS_ADC=y
 CONFIG_PWM=y
@@ -190,6 +216,7 @@ CONFIG_PHY_EXYNOS5250_SATA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -197,6 +224,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_CRAMFS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
@@ -211,7 +239,12 @@ CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_DEV_S5P=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRC_CCITT=y
 CONFIG_FONTS=y
 CONFIG_FONT_7x14=y
diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index d3a8018639de..9083399a8ab1 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -6,6 +6,7 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
@@ -24,14 +25,12 @@ CONFIG_ARCH_MXC=y
 CONFIG_MACH_SCB9328=y
 CONFIG_MACH_APF9328=y
 CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_EUKREA_CPUIMX25SD=y
-CONFIG_SOC_IMX25=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
-CONFIG_MACH_MXT_TD60=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX25=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -88,6 +87,7 @@ CONFIG_KEYBOARD_IMX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_MX25=y
 CONFIG_TOUCHSCREEN_MC13783=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
@@ -107,6 +107,7 @@ CONFIG_HWMON=m
 CONFIG_SENSORS_MC13783_ADC=m
 CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
+CONFIG_MFD_MX25_TSADC=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -169,11 +170,11 @@ CONFIG_RTC_DRV_IMXDI=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
-CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
+CONFIG_IMX_SDMA=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_IIO=y
+CONFIG_FSL_MX25_ADC=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
@@ -187,6 +188,5 @@ CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 79194c60c78c..978c5deeb47c 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -42,12 +42,12 @@ CONFIG_SOC_IMX6SL=y
 CONFIG_SOC_IMX6SX=y
 CONFIG_SOC_IMX6UL=y
 CONFIG_SOC_IMX7D=y
-CONFIG_SOC_LS1021A=y
 CONFIG_SOC_VF610=y
 CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_PCI_IMX6=y
 CONFIG_SMP=y
-CONFIG_VMSPLIT_2G=y
+CONFIG_ARM_PSCI=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
@@ -57,6 +57,7 @@ CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
@@ -72,7 +73,6 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
 CONFIG_NETFILTER=y
 CONFIG_CAN=y
 CONFIG_CAN_FLEXCAN=y
@@ -104,10 +104,13 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_SPI_FSL_QUADSPI=y
 CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
@@ -145,7 +148,6 @@ CONFIG_USB_RTL8152=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_CDC_EEM=m
 CONFIG_BRCMFMAC=m
-CONFIG_WL_TI=y
 CONFIG_WL12XX=m
 CONFIG_WLCORE_SDIO=m
 # CONFIG_WILINK_PLATFORM_DATA is not set
@@ -159,10 +161,12 @@ CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_IMX6UL_TSC=y
 CONFIG_TOUCHSCREEN_MC13783=y
 CONFIG_TOUCHSCREEN_TSC2007=y
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SX8654=y
+CONFIG_TOUCHSCREEN_COLIBRI_VF50=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
@@ -172,7 +176,6 @@ CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_FSL_LPUART=y
 CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_HW_RANDOM=y
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
@@ -181,6 +184,7 @@ CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_IMX=y
 CONFIG_SPI=y
 CONFIG_SPI_IMX=y
+CONFIG_SPI_FSL_DSPI=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MC9S08DZ60=y
 CONFIG_GPIO_PCA953X=y
@@ -191,6 +195,7 @@ CONFIG_POWER_RESET_IMX=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
 CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
@@ -224,8 +229,8 @@ CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_IMX_IPUV3_CORE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
 CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
 CONFIG_DRM_IMX_TVE=y
 CONFIG_DRM_IMX_LDB=y
@@ -269,6 +274,7 @@ CONFIG_USB_EHSET_TEST_FIXTURE=m
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
 CONFIG_USB_CONFIGFS=m
 CONFIG_USB_CONFIGFS_SERIAL=y
 CONFIG_USB_CONFIGFS_ACM=y
@@ -294,6 +300,7 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
@@ -310,13 +317,18 @@ CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_SNVS=y
 CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_MXS_DMA=y
-CONFIG_FSL_EDMA=y
 CONFIG_STAGING=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_VF610_ADC=y
 CONFIG_PWM=y
+CONFIG_PWM_FSL_FTM=y
 CONFIG_PWM_IMX=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -324,9 +336,6 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -361,6 +370,7 @@ CONFIG_PROVE_LOCKING=y
 # CONFIG_ARM_UNWIND is not set
 CONFIG_SECURITYFS=y
 CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_SAHARA=y
 CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC7=m
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 4fa94a1f115b..652b7bd9e544 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -95,7 +95,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS=y
 CONFIG_DEBUG_USER=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index c3058da631da..aa3af0a6b8f7 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -108,7 +108,6 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_LRW=y
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 95ce1284bd42..5bcc9cf9d8f1 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -4,6 +4,12 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS_ALL=y
@@ -27,6 +33,7 @@ CONFIG_SMP=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
+CONFIG_CMA=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 # CONFIG_SUSPEND is not set
@@ -57,7 +64,6 @@ CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_INET_AH=y
 CONFIG_INET_IPCOMP=y
-CONFIG_IPV6=y
 CONFIG_INET6_XFRM_MODE_TRANSPORT=m
 CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
@@ -93,7 +99,6 @@ CONFIG_IP_NF_MATCH_ECN=y
 CONFIG_IP_NF_MATCH_TTL=y
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_ULOG=y
 CONFIG_IP_NF_MANGLE=y
 CONFIG_IP_NF_TARGET_CLUSTERIP=y
 CONFIG_IP_NF_TARGET_ECN=y
@@ -106,7 +111,8 @@ CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP_SCTP=y
 CONFIG_VLAN_8021Q=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -117,7 +123,6 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
@@ -125,7 +130,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 CONFIG_TI_KEYSTONE_NETCP=y
 CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
-CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
@@ -137,12 +142,15 @@ CONFIG_I2C_DAVINCI=y
 CONFIG_SPI=y
 CONFIG_SPI_DAVINCI=y
 CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_SYSCON=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_KEYSTONE=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
 CONFIG_DAVINCI_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -150,9 +158,15 @@ CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DEBUG=y
-CONFIG_USB_DWC3_VERBOSE=y
 CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_SOC_TI=y
@@ -160,8 +174,11 @@ CONFIG_KEYSTONE_NAVIGATOR_QMSS=y
 CONFIG_KEYSTONE_NAVIGATOR_DMA=y
 CONFIG_MEMORY=y
 CONFIG_TI_AEMIF=y
+CONFIG_KEYSTONE_IRQ=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
@@ -179,11 +196,10 @@ CONFIG_NFSD_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_SHIRQ=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SHIRQ=y
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_AUTHENC=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTR=y
@@ -192,19 +208,3 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_USER_API_HASH=y
 CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_DAVINCI=y
-CONFIG_LEDS_CLASS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_KEYSTONE_IRQ=y
-CONFIG_GPIO_SYSCON=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DEVTMPFS=y
diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig
index b7e8cdab51f9..2ae00b09cfc2 100644
--- a/arch/arm/configs/lpc18xx_defconfig
+++ b/arch/arm/configs/lpc18xx_defconfig
@@ -52,15 +52,22 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_FW_LOADER is not set
 CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_SPI_NXP_SPIFI=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
@@ -102,14 +109,17 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
+CONFIG_I2C_LPC2K=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_74XX_MMIO=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_SENSORS_JC42=y
 CONFIG_SENSORS_LM75=y
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_MFD_SYSCON=y
+CONFIG_LPC18XX_WATCHDOG=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
@@ -117,6 +127,8 @@ CONFIG_FB_ARMCLCD=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_DW=y
 CONFIG_NEW_LEDS=y
@@ -127,12 +139,25 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_LPC24XX=y
 CONFIG_DMADEVICES=y
 CONFIG_AMBA_PL08X=y
+CONFIG_LPC18XX_DMAMUX=y
+CONFIG_MEMORY=y
+CONFIG_ARM_PL172_MPMC=y
+CONFIG_PWM=y
+CONFIG_PWM_LPC18XX_SCT=y
+CONFIG_IIO=y
+CONFIG_MMA7455_I2C=y
+CONFIG_IIO_SYSFS_TRIGGER=y
+CONFIG_PHY_LPC18XX_USB_OTG=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_LPC18XX_EEPROM=y
 CONFIG_EXT2_FS=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
+CONFIG_JFFS2_FS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
@@ -142,8 +167,6 @@ CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_FTRACE is not set
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRC_ITU_T=y
diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig
index c100b7df5441..9f56ca3985ae 100644
--- a/arch/arm/configs/lpc32xx_defconfig
+++ b/arch/arm/configs/lpc32xx_defconfig
@@ -204,7 +204,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 9c93f5655248..0b02e4f43c6a 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -158,6 +158,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
+CONFIG_EEPROM_AT24=y
 CONFIG_SPI=y
 CONFIG_SPI_S3C24XX=y
 CONFIG_SPI_SPIDEV=y
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index f69a459f4f92..e11d99d529ee 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -2,6 +2,7 @@ CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=19
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
@@ -11,10 +12,32 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_NETXBIG=y
 CONFIG_ARCH_MXC=y
-CONFIG_SOC_IMX25=y
 CONFIG_MACH_IMX27_DT=y
+CONFIG_SOC_IMX25=y
+CONFIG_ARCH_ORION5X=y
+CONFIG_MACH_DB88F5281=y
+CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_RD88F5182_DT=y
+CONFIG_MACH_KUROBOX_PRO=y
+CONFIG_MACH_DNS323=y
+CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
+CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_LINKSTATION_LSCHL=y
+CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
+CONFIG_MACH_TS409=y
+CONFIG_MACH_WRT350N_V2=y
+CONFIG_MACH_TS78XX=y
+CONFIG_MACH_MV2120=y
+CONFIG_MACH_D2NET_DT=y
+CONFIG_MACH_NET2BIG=y
+CONFIG_MACH_MSS2_DT=y
+CONFIG_MACH_WNR854T=y
+CONFIG_MACH_RD88F5181L_GE=y
+CONFIG_MACH_RD88F5181L_FXO=y
+CONFIG_MACH_RD88F6183AP_GE=y
 CONFIG_ARCH_U300=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y
@@ -38,6 +61,8 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
@@ -53,7 +78,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ORION=y
 CONFIG_BLK_DEV_LOOP=y
@@ -66,14 +90,17 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123=y
 CONFIG_NET_DSA_MV88E6171=y
+CONFIG_NET_DSA_MV88E6352=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
-CONFIG_MWL8K=m
 CONFIG_LIBERTAS=y
 CONFIG_LIBERTAS_SDIO=y
+CONFIG_MWL8K=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
@@ -92,7 +119,6 @@ CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
@@ -105,17 +131,16 @@ CONFIG_THERMAL=y
 CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+# CONFIG_ABX500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y
 CONFIG_SND_SOC_ALC5623=y
 CONFIG_SND_SIMPLE_CARD=y
-# CONFIG_ABX500_CORE is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
@@ -162,8 +187,6 @@ CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -189,7 +212,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 03deb7fb35e8..28234906a064 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -11,8 +11,13 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_MULTI_V7=y
+# CONFIG_ARCH_MULTI_V5 is not set
+# CONFIG_ARCH_MULTI_V4 is not set
 CONFIG_ARCH_VIRT=y
 CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_ARTPEC=y
+CONFIG_MACH_ARTPEC6=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_375=y
@@ -21,13 +26,16 @@ CONFIG_MACH_ARMADA_39X=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_MACH_DOVE=y
 CONFIG_ARCH_AT91=y
+CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARCH_BCM_NSP=y
 CONFIG_ARCH_BCM_21664=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_5301X=y
+CONFIG_ARCH_BCM2835=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
@@ -73,7 +81,7 @@ CONFIG_MACH_SPEAR1340=y
 CONFIG_ARCH_STI=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_EXYNOS5420_MCPM=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
@@ -85,7 +93,6 @@ CONFIG_ARCH_R8A7791=y
 CONFIG_ARCH_R8A7793=y
 CONFIG_ARCH_R8A7794=y
 CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_SIRF=y
 CONFIG_ARCH_TEGRA=y
@@ -124,6 +131,7 @@ CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_NEON=y
@@ -151,8 +159,10 @@ CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
 CONFIG_CAN_DEV=y
 CONFIG_CAN_AT91=m
+CONFIG_CAN_RCAR=m
 CONFIG_CAN_XILINXCAN=y
 CONFIG_CAN_MCP251X=y
+CONFIG_CAN_SUN4I=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
@@ -167,6 +177,7 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_OMAP_OCP2SCP=y
 CONFIG_SIMPLE_PM_BUS=y
+CONFIG_SUNXI_RSB=m
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -174,19 +185,24 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
 CONFIG_MTD_NAND_BRCMNAND=y
+CONFIG_MTD_NAND_VF610_NFC=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_SPI_NOR=y
+CONFIG_SPI_FSL_QUADSPI=m
 CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_VIRTIO_BLK=y
 CONFIG_AD525X_DPOT=y
 CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ATMEL_TCLIB=y
 CONFIG_ICS932S401=y
 CONFIG_ATMEL_SSC=m
+CONFIG_QCOM_COINCELL=m
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
 CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_SUNXI_SID=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -200,18 +216,22 @@ CONFIG_SATA_HIGHBANK=y
 CONFIG_SATA_MV=y
 CONFIG_SATA_RCAR=y
 CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_MACB=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_GIANFAR=y
 CONFIG_IGB=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
+CONFIG_PXA168_ETH=m
 CONFIG_KS8851=y
 CONFIG_R8169=y
 CONFIG_SH_ETH=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
+CONFIG_SYNOPSYS_DWC_ETH_QOS=y
 CONFIG_TI_CPSW=y
 CONFIG_XILINX_EMACLITE=y
 CONFIG_AT803X_PHY=y
@@ -219,8 +239,11 @@ CONFIG_MARVELL_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_BROADCOM_PHY=y
 CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
 CONFIG_MICREL_PHY=y
+CONFIG_FIXED_PHY=y
 CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8152=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
@@ -236,7 +259,7 @@ CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_KEYBOARD_ST_KEYSCAN=y
-CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_CROS_EC=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=y
@@ -245,9 +268,12 @@ CONFIG_TOUCHSCREEN_ATMEL_MXT=y
 CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_TOUCHSCREEN_WM97XX=m
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MAX77693_HAPTIC=m
+CONFIG_INPUT_MAX8997_HAPTIC=m
 CONFIG_INPUT_MPU3050=y
-CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_INPUT_AXP20X_PEK=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
@@ -288,6 +314,8 @@ CONFIG_SERIAL_CONEXANT_DIGICOLOR=y
 CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y
 CONFIG_SERIAL_ST_ASC=y
 CONFIG_SERIAL_ST_ASC_CONSOLE=y
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DAVINCI=y
 CONFIG_I2C_MUX=y
@@ -295,29 +323,39 @@ CONFIG_I2C_ARB_GPIO_CHALLENGE=m
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
 CONFIG_I2C_AT91=m
+CONFIG_I2C_BCM2835=y
 CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_DIGICOLOR=m
+CONFIG_I2C_EMEV2=m
 CONFIG_I2C_GPIO=m
 CONFIG_I2C_EXYNOS5=y
+CONFIG_I2C_IMX=m
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_RIIC=y
+CONFIG_I2C_RK3X=y
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SH_MOBILE=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_ST=y
 CONFIG_I2C_SUN6I_P2WI=y
 CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER=y
+CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_XILINX=y
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=m
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=m
+CONFIG_SPI_BCM2835=y
+CONFIG_SPI_BCM2835AUX=y
 CONFIG_SPI_CADENCE=y
 CONFIG_SPI_DAVINCI=y
+CONFIG_SPI_FSL_DSPI=m
 CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
+CONFIG_SPI_ROCKCHIP=m
 CONFIG_SPI_RSPI=y
 CONFIG_SPI_S3C64XX=m
 CONFIG_SPI_SH_MSIOF=m
@@ -330,9 +368,19 @@ CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_SPI_XILINX=y
 CONFIG_SPI_SPIDEV=y
+CONFIG_SPMI=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
+CONFIG_PINCTRL_IPQ8064=y
+CONFIG_PINCTRL_MSM8660=y
+CONFIG_PINCTRL_MSM8960=y
+CONFIG_PINCTRL_MSM8X74=y
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_GENERIC_PLATFORM=y
 CONFIG_GPIO_DAVINCI=y
@@ -354,17 +402,24 @@ CONFIG_BATTERY_MAX17040=m
 CONFIG_BATTERY_MAX17042=m
 CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
+CONFIG_CHARGER_MAX8997=m
 CONFIG_CHARGER_TPS65090=y
+CONFIG_AXP20X_POWER=m
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_KEYSTONE=y
 CONFIG_POWER_RESET_RMOBILE=y
+CONFIG_POWER_AVS=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_SENSORS_IIO_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
 CONFIG_SENSORS_NTC_THERMISTOR=m
-CONFIG_THERMAL=y
+CONFIG_SENSORS_PWM_FAN=m
+CONFIG_SENSORS_INA2XX=m
 CONFIG_CPU_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_DAVINCI_WATCHDOG=m
@@ -372,54 +427,78 @@ CONFIG_EXYNOS_THERMAL=m
 CONFIG_ST_THERMAL_SYSCFG=y
 CONFIG_ST_THERMAL_MEMMAP=y
 CONFIG_WATCHDOG=y
+CONFIG_DA9063_WATCHDOG=m
 CONFIG_XILINX_WATCHDOG=y
 CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
 CONFIG_ST_LPC_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
+CONFIG_IMX2_WDT=y
 CONFIG_TEGRA_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_MFD_BCM590XX=y
 CONFIG_MFD_AXP20X=y
-CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_AXP20X_I2C=m
+CONFIG_MFD_AXP20X_RSB=m
+CONFIG_MFD_CROS_EC=m
 CONFIG_MFD_CROS_EC_I2C=m
-CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_CROS_EC_SPI=m
+CONFIG_MFD_DA9063=m
 CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
 CONFIG_MFD_MAX8907=y
+CONFIG_MFD_MAX8997=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_PM8921_CORE=y
+CONFIG_MFD_QCOM_RPM=y
+CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS65217=y
+CONFIG_MFD_TPS65218=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_MFD_TPS65910=y
 CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_ACT8865=y
 CONFIG_REGULATOR_AS3711=y
 CONFIG_REGULATOR_AS3722=y
-CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_AXP20X=m
 CONFIG_REGULATOR_BCM590XX=y
 CONFIG_REGULATOR_DA9210=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_RK808=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_MFD_SYSCON=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_REGULATOR_LP872X=y
 CONFIG_REGULATOR_MAX14577=m
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_MAX8973=y
+CONFIG_REGULATOR_MAX8997=m
 CONFIG_REGULATOR_MAX77686=y
 CONFIG_REGULATOR_MAX77693=m
 CONFIG_REGULATOR_MAX77802=m
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_PWM=m
+CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_REGULATOR_S2MPS11=y
 CONFIG_REGULATOR_S5M8767=y
+CONFIG_REGULATOR_TI_ABB=y
 CONFIG_REGULATOR_TPS51632=y
 CONFIG_REGULATOR_TPS62360=y
 CONFIG_REGULATOR_TPS65090=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
@@ -436,11 +515,13 @@ CONFIG_SOC_CAMERA=m
 CONFIG_SOC_CAMERA_PLATFORM=m
 CONFIG_VIDEO_RCAR_VIN=m
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_JPU=m
 CONFIG_VIDEO_RENESAS_VSP1=m
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=m
 CONFIG_VIDEO_ML86V7667=m
 CONFIG_DRM=y
+CONFIG_DRM_I2C_ADV7511=m
 # CONFIG_DRM_I2C_CH7006 is not set
 # CONFIG_DRM_I2C_SIL164 is not set
 CONFIG_DRM_NXP_PTN3460=m
@@ -450,10 +531,15 @@ CONFIG_DRM_EXYNOS=m
 CONFIG_DRM_EXYNOS_DSI=y
 CONFIG_DRM_EXYNOS_FIMD=y
 CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_DW_HDMI=m
 CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_TEGRA=y
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_VC4=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
@@ -474,26 +560,40 @@ CONFIG_SND_HDA_INPUT_BEEP=y
 CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=m
 CONFIG_SND_HDA_CODEC_HDMI=m
-CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_ATMEL_SOC=m
 CONFIG_SND_ATMEL_SOC_WM8904=m
+CONFIG_SND_SOC_FSL_SAI=m
+CONFIG_SND_SOC_ROCKCHIP=m
+CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
+CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
+CONFIG_SND_SOC_ROCKCHIP_RT5645=m
 CONFIG_SND_SOC_SH4_FSI=m
 CONFIG_SND_SOC_RCAR=m
 CONFIG_SND_SOC_RSRC_CARD=m
+CONFIG_SND_SUN4I_CODEC=m
+CONFIG_SND_SOC_SAMSUNG=m
+CONFIG_SND_SOC_SNOW=m
+CONFIG_SND_SOC_ODROIDX2=m
 CONFIG_SND_SOC_TEGRA=m
 CONFIG_SND_SOC_TEGRA_RT5640=m
 CONFIG_SND_SOC_TEGRA_WM8753=m
 CONFIG_SND_SOC_TEGRA_WM8903=m
+CONFIG_SND_SOC_TEGRA_WM9712=m
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=m
 CONFIG_SND_SOC_TEGRA_ALC5632=m
 CONFIG_SND_SOC_TEGRA_MAX98090=m
 CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_SGTL5000=m
+CONFIG_SND_SOC_SPDIF=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_RCAR=m
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=m
 CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_STI=y
@@ -506,24 +606,32 @@ CONFIG_USB_OHCI_EXYNOS=m
 CONFIG_USB_R8A66597_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SUNXI=m
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=m
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_AB8500_USB=y
 CONFIG_KEYSTONE_USB_PHY=y
 CONFIG_OMAP_USB3=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
+CONFIG_USB_MSM_OTG=m
 CONFIG_USB_MXS_PHY=y
-CONFIG_USB_RCAR_PHY=m
 CONFIG_USB_GADGET=y
+CONFIG_USB_FSL_USB2=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_ETH=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_AT91=y
+CONFIG_MMC_SDHCI_OF_ESDHC=m
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -532,10 +640,12 @@ CONFIG_MMC_SDHCI_SPEAR=y
 CONFIG_MMC_SDHCI_S3C=y
 CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_SDHCI_BCM_KONA=y
+CONFIG_MMC_SDHCI_BCM2835=y
 CONFIG_MMC_SDHCI_ST=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MMC_ATMELMCI=y
+CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_MVSDIO=y
 CONFIG_MMC_SDHI=y
 CONFIG_MMC_DW=y
@@ -547,8 +657,11 @@ CONFIG_MMC_SH_MMCIF=y
 CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=m
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
+CONFIG_LEDS_MAX77693=m
+CONFIG_LEDS_MAX8997=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
@@ -566,9 +679,11 @@ CONFIG_EDAC_HIGHBANK_L2=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_HYM8563=m
 CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_MAX8997=m
 CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_MAX77802=m
+CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_RS5C372=m
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_ST_LPC=y
@@ -578,6 +693,7 @@ CONFIG_RTC_DRV_TPS65910=y
 CONFIG_RTC_DRV_S35390A=m
 CONFIG_RTC_DRV_RX8581=m
 CONFIG_RTC_DRV_EM3027=y
+CONFIG_RTC_DRV_DA9063=m
 CONFIG_RTC_DRV_DIGICOLOR=m
 CONFIG_RTC_DRV_S5M=m
 CONFIG_RTC_DRV_S3C=m
@@ -593,10 +709,12 @@ CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
 CONFIG_AT_HDMAC=y
 CONFIG_AT_XDMAC=y
+CONFIG_FSL_EDMA=y
 CONFIG_MV_XOR=y
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_SH_DMAE=y
 CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=m
 CONFIG_STE_DMA40=y
 CONFIG_SIRF_DMA=y
 CONFIG_TI_EDMA=y
@@ -604,7 +722,9 @@ CONFIG_PL330_DMA=y
 CONFIG_IMX_SDMA=y
 CONFIG_IMX_DMA=y
 CONFIG_MXS_DMA=y
+CONFIG_DMA_BCM2835=y
 CONFIG_DMA_OMAP=y
+CONFIG_QCOM_BAM_DMA=y
 CONFIG_XILINX_VDMA=y
 CONFIG_DMA_SUN6I=y
 CONFIG_STAGING=y
@@ -617,16 +737,27 @@ CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_WCNSS_CTRL=m
+CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_CHROME_PLATFORMS=y
+CONFIG_STAGING_BOARD=y
 CONFIG_CROS_EC_CHARDEV=m
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_MAX77802=m
+CONFIG_COMMON_CLK_RK808=m
 CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_PM_DEVFREQ=y
@@ -636,21 +767,31 @@ CONFIG_EXTCON=y
 CONFIG_TI_AEMIF=y
 CONFIG_IIO=y
 CONFIG_AT91_ADC=m
+CONFIG_BERLIN2_ADC=m
 CONFIG_EXYNOS_ADC=m
+CONFIG_VF610_ADC=m
 CONFIG_XILINX_XADC=y
 CONFIG_AK8975=y
+CONFIG_RASPBERRYPI_POWER=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=m
 CONFIG_PWM_ATMEL_TCB=m
+CONFIG_PWM_FSL_FTM=m
 CONFIG_PWM_RENESAS_TPU=y
+CONFIG_PWM_ROCKCHIP=m
 CONFIG_PWM_SAMSUNG=m
 CONFIG_PWM_SUN4I=y
 CONFIG_PWM_TEGRA=y
 CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PWM_STI=m
+CONFIG_PWM_BCM2835=y
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
+CONFIG_PHY_BERLIN_USB=y
+CONFIG_PHY_BERLIN_SATA=y
+CONFIG_PHY_ROCKCHIP_USB=m
+CONFIG_PHY_QCOM_APQ8064_SATA=m
 CONFIG_PHY_MIPHY28LP=y
 CONFIG_PHY_MIPHY365X=y
 CONFIG_PHY_RCAR_GEN2=m
@@ -659,6 +800,10 @@ CONFIG_PHY_STIH407_USB=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_SAMSUNG_USB2=m
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SUNXI_SID=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_MSDOS_FS=y
@@ -685,6 +830,7 @@ CONFIG_CRYPTO_DEV_TEGRA_AES=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_KEYSTONE_IRQ=y
 CONFIG_CRYPTO_DEV_SUN4I_SS=m
+CONFIG_CRYPTO_DEV_ROCKCHIP=m
 CONFIG_ARM_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
@@ -699,3 +845,7 @@ CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
 CONFIG_CRYPTO_DEV_ATMEL_SHA=m
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_MMIO=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 85d10d2e3d66..a0345e1ce172 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -11,6 +11,9 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MV78XX0=y
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
@@ -132,7 +135,6 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
index 824de499237b..4562006aae68 100644
--- a/arch/arm/configs/mvebu_v5_defconfig
+++ b/arch/arm/configs/mvebu_v5_defconfig
@@ -12,8 +12,29 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_NETXBIG=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
+CONFIG_ARCH_ORION5X=y
+CONFIG_MACH_DB88F5281=y
+CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_RD88F5182_DT=y
+CONFIG_MACH_KUROBOX_PRO=y
+CONFIG_MACH_DNS323=y
+CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
+CONFIG_MACH_LINKSTATION_PRO=y
+CONFIG_MACH_LINKSTATION_LSCHL=y
+CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
+CONFIG_MACH_TS409=y
+CONFIG_MACH_WRT350N_V2=y
+CONFIG_MACH_TS78XX=y
+CONFIG_MACH_MV2120=y
+CONFIG_MACH_D2NET_DT=y
+CONFIG_MACH_NET2BIG=y
+CONFIG_MACH_MSS2_DT=y
+CONFIG_MACH_WNR854T=y
+CONFIG_MACH_RD88F5181L_GE=y
+CONFIG_MACH_RD88F5181L_FXO=y
+CONFIG_MACH_RD88F6183AP_GE=y
 CONFIG_PCI_MVEBU=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -26,6 +47,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_STAT_DETAILS=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_KIRKWOOD_CPUIDLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -35,6 +57,8 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
@@ -66,8 +90,11 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123=y
 CONFIG_NET_DSA_MV88E6171=y
+CONFIG_NET_DSA_MV88E6352=y
 CONFIG_MV643XX_ETH=y
 CONFIG_R8169=y
 CONFIG_MARVELL_PHY=y
@@ -91,7 +118,6 @@ CONFIG_I2C_MV64XXX=y
 CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_QNAP=y
@@ -103,16 +129,16 @@ CONFIG_SENSORS_LM85=y
 CONFIG_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_T5325=y
 CONFIG_SND_SOC_ALC5623=y
+CONFIG_SND_SOC_CS42L51_I2C=y
 CONFIG_SND_SIMPLE_CARD=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_HID_DRAGONRISE=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_TWINHAN=y
@@ -159,8 +185,6 @@ CONFIG_STAGING=y
 CONFIG_FB_XGI=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 CONFIG_UDF_FS=m
@@ -186,7 +210,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MV_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 13fcd020e375..dc5797a2efab 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -58,9 +58,11 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_SPI_NOR=y
+CONFIG_SRAM=y
 CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
 CONFIG_AHCI_MVEBU=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
@@ -85,6 +87,9 @@ CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PCA953X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
@@ -105,18 +110,22 @@ CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_STORAGE=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_DOVE=y
 CONFIG_MMC_SDHCI_PXAV3=y
 CONFIG_MMC_MVSDIO=y
-CONFIG_LEDS_GPIO=y
+CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_RTC_DRV_ARMADA38X=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index b47e7c6628c9..6e0f751be229 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -12,6 +12,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_IPC_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
@@ -141,9 +142,8 @@ CONFIG_IIO=y
 CONFIG_IIO_SYSFS_TRIGGER=y
 CONFIG_PWM=y
 CONFIG_PWM_MXS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_MXS_OCOTP=y
 CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_FSCACHE=m
@@ -178,7 +178,6 @@ CONFIG_PROVE_LOCKING=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_STRICT_DEVMEM=y
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_DEV_MXS_DCP=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC7=m
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 25ed772dfb2f..4f3dfb21772b 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -5,6 +5,7 @@ CONFIG_ARCH_FOOTBRIDGE=y
 CONFIG_ARCH_NETWINDER=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
+CONFIG_DEPRECATED_PARAM_STRUCT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=0x301"
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index c5e1943e5427..156bc88b8523 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_KERNMEM_PERMS=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_ARM_ERRATA_430973=y
 CONFIG_SMP=y
@@ -144,6 +145,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_SENSORS_TSL2550=m
 CONFIG_BMP085_I2C=m
 CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=m
 CONFIG_SENSORS_LIS3_I2C=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -177,6 +179,7 @@ CONFIG_TI_CPTS=y
 CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=m
+CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
@@ -276,6 +279,7 @@ CONFIG_MFD_TPS65218=y
 CONFIG_MFD_TPS65910=y
 CONFIG_MFD_TI_AM335X_TSCADC=m
 CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_LP872X=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_TI_ABB=y
@@ -286,28 +290,35 @@ CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65218=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_OMAP3=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+CONFIG_VIDEO_TVP5150=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP5_DSS_HDMI=y
+CONFIG_FB_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
+CONFIG_FB_OMAP2_ENCODER_TFP410=m
+CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
+CONFIG_FB_OMAP2_CONNECTOR_DVI=m
+CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
+CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
+CONFIG_FB_OMAP2_PANEL_DPI=m
+CONFIG_FB_OMAP2_PANEL_DSI_CM=m
+CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
+CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
+CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y
@@ -354,6 +365,11 @@ CONFIG_USB_MUSB_DSPS=m
 CONFIG_USB_INVENTRA_DMA=y
 CONFIG_USB_TI_CPPI41_DMA=y
 CONFIG_USB_DWC3=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_TEST=m
 CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=m
@@ -387,6 +403,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_PWM=m
+CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -404,7 +421,8 @@ CONFIG_RTC_DRV_OMAP=m
 CONFIG_DMADEVICES=y
 CONFIG_TI_EDMA=y
 CONFIG_DMA_OMAP=y
-# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_OMAP_IOMMU=y
 CONFIG_EXTCON=m
 CONFIG_EXTCON_USB_GPIO=m
 CONFIG_EXTCON_PALMAS=m
@@ -449,6 +467,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_SPLIT=y
+CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 8099417a9466..6a5bc27538f1 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -13,6 +13,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ORION5X=y
 CONFIG_ARCH_ORION5X_DT=y
 CONFIG_MACH_DB88F5281=y
@@ -83,7 +86,7 @@ CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
 CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MARVELL_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -159,7 +162,6 @@ CONFIG_LATENCYTOP=y
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
new file mode 100644
index 000000000000..dc5517eaf09f
--- /dev/null
+++ b/arch/arm/configs/pxa_defconfig
@@ -0,0 +1,784 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=13
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_LDM_PARTITION=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_ARCH_PXA=y
+CONFIG_MACH_PXA27X_DT=y
+CONFIG_MACH_PXA3XX_DT=y
+CONFIG_ARCH_LUBBOCK=y
+CONFIG_MACH_MAINSTONE=y
+CONFIG_MACH_ZYLONITE300=y
+CONFIG_MACH_ZYLONITE320=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+CONFIG_ARCH_PXA_IDP=y
+CONFIG_ARCH_VIPER=y
+CONFIG_MACH_ARCOM_ZEUS=y
+CONFIG_MACH_BALLOON3=y
+CONFIG_MACH_CSB726=y
+CONFIG_CSB726_CSB701=y
+CONFIG_MACH_ARMCORE=y
+CONFIG_MACH_EM_X270=y
+CONFIG_MACH_EXEDA=y
+CONFIG_MACH_CM_X300=y
+CONFIG_MACH_CAPC7117=y
+CONFIG_ARCH_GUMSTIX=y
+CONFIG_MACH_INTELMOTE2=y
+CONFIG_MACH_STARGATE2=y
+CONFIG_MACH_XCEP=y
+CONFIG_TRIZEPS_PXA=y
+CONFIG_MACH_TRIZEPS4WL=y
+CONFIG_MACH_LOGICPD_PXA270=y
+CONFIG_MACH_PCM027=y
+CONFIG_MACH_PCM990_BASEBOARD=y
+CONFIG_MACH_COLIBRI=y
+CONFIG_MACH_COLIBRI_PXA270_INCOME=y
+CONFIG_MACH_COLIBRI300=y
+CONFIG_MACH_COLIBRI320=y
+CONFIG_MACH_COLIBRI_EVALBOARD=y
+CONFIG_MACH_VPAC270=y
+CONFIG_MACH_H4700=y
+CONFIG_MACH_H5000=y
+CONFIG_MACH_HIMALAYA=y
+CONFIG_MACH_MAGICIAN=y
+CONFIG_MACH_MIOA701=y
+CONFIG_PXA_EZX=y
+CONFIG_MACH_MP900C=y
+CONFIG_ARCH_PXA_PALM=y
+CONFIG_MACH_RAUMFELD_RC=y
+CONFIG_MACH_RAUMFELD_CONNECTOR=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
+CONFIG_PXA_SHARPSL=y
+CONFIG_MACH_POODLE=y
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_BORZOI=y
+CONFIG_MACH_TOSA=y
+CONFIG_TOSA_BT=m
+CONFIG_TOSA_USE_EXT_KEYCODES=y
+CONFIG_MACH_ICONTROL=y
+CONFIG_ARCH_PXA_ESERIES=y
+CONFIG_MACH_ZIPIT2=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCCARD=m
+CONFIG_YENTA=m
+CONFIG_PCMCIA_PXA2XX=m
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_COMPACTION is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 ro"
+CONFIG_KEXEC=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPUFREQ_DT=m
+CONFIG_ARM_PXA2xx_CPUFREQ=m
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_IPV6 is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_IEEE802154=y
+CONFIG_DNS_RESOLVER=y
+CONFIG_IRDA=m
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+CONFIG_IRTTY_SIR=m
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_CFG80211=m
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_MAC80211=m
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_RFKILL_GPIO=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+CONFIG_MTD_CMDLINE_PARTS=m
+CONFIG_MTD_AFS_PARTS=m
+CONFIG_MTD_OF_PARTS=m
+CONFIG_MTD_AR7_PARTS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PXA2XX=m
+CONFIG_MTD_M25P80=m
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_DOCG3=m
+CONFIG_MTD_NAND=m
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_GPIO=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x4000000
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+CONFIG_MTD_NAND_SHARPSL=m
+CONFIG_MTD_NAND_PXA3xx=m
+CONFIG_MTD_NAND_CM_X270=m
+CONFIG_MTD_NAND_TMIO=m
+CONFIG_MTD_NAND_BRCMNAND=m
+CONFIG_MTD_NAND_PLATFORM=m
+CONFIG_MTD_ONENAND=m
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=m
+CONFIG_MTD_SPI_NOR=m
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=8
+CONFIG_AD525X_DPOT=m
+CONFIG_AD525X_DPOT_I2C=m
+CONFIG_ICS932S401=m
+CONFIG_APDS9802ALS=m
+CONFIG_ISL29003=m
+CONFIG_TI_DAC7512=m
+CONFIG_EEPROM_AT24=m
+CONFIG_SENSORS_LIS3_SPI=m
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=m
+CONFIG_SATA_AHCI=m
+CONFIG_SATA_AHCI_PLATFORM=m
+CONFIG_SATA_MV=m
+CONFIG_PATA_PXA=m
+CONFIG_PATA_PCMCIA=m
+CONFIG_PATA_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_MACB=m
+CONFIG_DM9000=m
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+CONFIG_IGB=m
+CONFIG_KS8851=y
+CONFIG_AX88796=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_8139TOO=m
+CONFIG_R8169=m
+CONFIG_SMC91X=m
+CONFIG_SMSC911X=m
+CONFIG_STMMAC_ETH=m
+CONFIG_PHYLIB=y
+CONFIG_AT803X_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=m
+CONFIG_MICREL_PHY=m
+CONFIG_FIXED_PHY=m
+CONFIG_MDIO_BITBANG=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_BRCMFMAC=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_INPUT_FF_MEMLESS=m
+CONFIG_INPUT_POLLDEV=y
+CONFIG_INPUT_MATRIXKMAP=y
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_APMPOWER=m
+CONFIG_KEYBOARD_ATKBD=m
+CONFIG_KEYBOARD_QT1070=m
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_PXA27x=m
+CONFIG_KEYBOARD_PXA930_ROTARY=m
+CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_CYAPA=m
+CONFIG_MOUSE_ELAN_I2C=m
+CONFIG_MOUSE_PXA930_TRKBALL=m
+CONFIG_MOUSE_NAVPOINT_PXA27x=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_DA9034=m
+CONFIG_TOUCHSCREEN_EETI=m
+CONFIG_TOUCHSCREEN_FUJITSU=m
+CONFIG_TOUCHSCREEN_ELO=m
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+CONFIG_TOUCHSCREEN_UCB1400=m
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+CONFIG_TOUCHSCREEN_PCAP=m
+CONFIG_TOUCHSCREEN_ST1232=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_AXP20X_PEK=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_PCAP=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_SERIO=m
+CONFIG_SERIO_SA1111=m
+CONFIG_LEGACY_PTY_COUNT=8
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=7
+CONFIG_SERIAL_8250_RUNTIME_UARTS=7
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_MUX_PCA954x=m
+CONFIG_I2C_MUX_PINCTRL=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=m
+CONFIG_I2C_PXA_SLAVE=y
+CONFIG_I2C_XILINX=m
+CONFIG_I2C_CROS_EC_TUNNEL=m
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_CADENCE=m
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_PXA2XX=m
+CONFIG_SPI_ROCKCHIP=m
+CONFIG_SPI_XILINX=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_PPS=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_DWAPB=m
+CONFIG_GPIO_GENERIC_PLATFORM=m
+CONFIG_GPIO_MAX732X=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PALMAS=y
+CONFIG_GPIO_TPS6586X=y
+CONFIG_GPIO_TPS65910=y
+CONFIG_GPIO_MAX7301=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=m
+CONFIG_BATTERY_SBS=m
+CONFIG_BATTERY_DA9030=m
+CONFIG_BATTERY_MAX17040=m
+CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_MAX14577=m
+CONFIG_CHARGER_MAX77693=m
+CONFIG_CHARGER_TPS65090=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM95245=m
+CONFIG_SENSORS_NTC_THERMISTOR=m
+CONFIG_THERMAL=m
+CONFIG_WATCHDOG=y
+CONFIG_XILINX_WATCHDOG=m
+CONFIG_SA1100_WATCHDOG=m
+CONFIG_MFD_AS3711=y
+CONFIG_MFD_BCM590XX=m
+CONFIG_MFD_AXP20X=y
+CONFIG_MFD_CROS_EC=m
+CONFIG_MFD_CROS_EC_I2C=m
+CONFIG_MFD_CROS_EC_SPI=m
+CONFIG_MFD_ASIC3=y
+CONFIG_PMIC_DA903X=y
+CONFIG_HTC_EGPIO=y
+CONFIG_HTC_PASIC3=m
+CONFIG_MFD_MAX14577=y
+CONFIG_MFD_MAX77693=y
+CONFIG_MFD_MAX8907=m
+CONFIG_EZX_PCAP=y
+CONFIG_UCB1400_CORE=m
+CONFIG_MFD_PM8921_CORE=m
+CONFIG_MFD_SEC_CORE=y
+CONFIG_MFD_PALMAS=y
+CONFIG_MFD_TPS65090=y
+CONFIG_MFD_TPS6586X=y
+CONFIG_MFD_TPS65910=y
+CONFIG_MFD_T7L66XB=y
+CONFIG_MFD_TC6387XB=y
+CONFIG_MFD_TC6393XB=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=m
+CONFIG_REGULATOR_USERSPACE_CONSUMER=m
+CONFIG_REGULATOR_ACT8865=m
+CONFIG_REGULATOR_AS3711=m
+CONFIG_REGULATOR_AXP20X=m
+CONFIG_REGULATOR_BCM590XX=m
+CONFIG_REGULATOR_DA903X=m
+CONFIG_REGULATOR_DA9210=m
+CONFIG_REGULATOR_FAN53555=m
+CONFIG_REGULATOR_GPIO=m
+CONFIG_REGULATOR_MAX14577=m
+CONFIG_REGULATOR_MAX8660=m
+CONFIG_REGULATOR_MAX8907=m
+CONFIG_REGULATOR_MAX8973=m
+CONFIG_REGULATOR_MAX77693=m
+CONFIG_REGULATOR_PALMAS=m
+CONFIG_REGULATOR_PCAP=m
+CONFIG_REGULATOR_PWM=m
+CONFIG_REGULATOR_S2MPS11=m
+CONFIG_REGULATOR_S5M8767=m
+CONFIG_REGULATOR_TPS51632=m
+CONFIG_REGULATOR_TPS62360=m
+CONFIG_REGULATOR_TPS65090=m
+CONFIG_REGULATOR_TPS6586X=m
+CONFIG_REGULATOR_TPS65910=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_PXA27x=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_DRM=m
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_PXA_OVERLAY=y
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_PXA3XX_GCU=m
+CONFIG_FB_MBX=m
+CONFIG_FB_VIRTUAL=m
+CONFIG_FB_SIMPLE=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CORGI=m
+CONFIG_LCD_PLATFORM=m
+CONFIG_LCD_TOSA=m
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_TOSA=m
+CONFIG_FRAMEBUFFER_CONSOLE=m
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_PXA2XX_AC97=m
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=m
+CONFIG_SND_ATMEL_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_CORGI=m
+CONFIG_SND_PXA2XX_SOC_SPITZ=m
+CONFIG_SND_PXA2XX_SOC_Z2=m
+CONFIG_SND_PXA2XX_SOC_POODLE=m
+CONFIG_SND_PXA2XX_SOC_TOSA=m
+CONFIG_SND_PXA2XX_SOC_E740=m
+CONFIG_SND_PXA2XX_SOC_E750=m
+CONFIG_SND_PXA2XX_SOC_E800=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
+CONFIG_SND_PXA2XX_SOC_PALM27X=y
+CONFIG_SND_SOC_ZYLONITE=m
+CONFIG_SND_SOC_RAUMFELD=m
+CONFIG_SND_PXA2XX_SOC_HX4700=m
+CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
+CONFIG_SND_PXA2XX_SOC_MIOA701=m
+CONFIG_SND_PXA2XX_SOC_IMOTE2=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_WM8978=m
+CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID=m
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+CONFIG_HID_SMARTJOYPLUS=m
+CONFIG_HID_TOPSEED=m
+CONFIG_HID_THRUSTMASTER=m
+CONFIG_HID_ZEROPLUS=m
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB=m
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=m
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_HCD_PLATFORM=m
+CONFIG_USB_ISP116X_HCD=m
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PLATFORM=m
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+CONFIG_USB_R8A66597_HCD=m
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_DWC3=m
+CONFIG_USB_DWC2=m
+CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=m
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_PXA25X=m
+CONFIG_USB_PXA27X=m
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=m
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_SDIO_UART=m
+CONFIG_MMC_PXA=m
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI_PLTFM=m
+CONFIG_MMC_TMIO=m
+CONFIG_MMC_DW=m
+CONFIG_MMC_DW_EXYNOS=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_DA903X=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_LEDS_TRIGGER_TRANSIENT=m
+CONFIG_LEDS_TRIGGER_CAMERA=m
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DEBUG=y
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_MAX8907=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_PALMAS=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_TPS6586X=m
+CONFIG_RTC_DRV_TPS65910=m
+CONFIG_RTC_DRV_S35390A=m
+CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_EM3027=m
+CONFIG_RTC_DRV_S5M=m
+CONFIG_RTC_DRV_V3020=m
+CONFIG_RTC_DRV_PXA=m
+CONFIG_RTC_DRV_PCAP=m
+CONFIG_DMADEVICES=y
+CONFIG_PXA_DMA=y
+CONFIG_DW_DMAC=m
+CONFIG_UIO=y
+CONFIG_CROS_EC_CHARDEV=m
+CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_PM_DEVFREQ=y
+CONFIG_EXTCON=y
+CONFIG_MEMORY=y
+CONFIG_PWM=y
+CONFIG_PWM_PXA=m
+CONFIG_PHY_SAMSUNG_USB2=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_REISERFS_FS=m
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_UBIFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFS_FSCACHE=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_WARN=0
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_TIMER_STATS=y
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_DEBUG_USER=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM=m
+CONFIG_CRYPTO_SHA256_ARM=m
+CONFIG_CRYPTO_SHA512_ARM=m
+CONFIG_CRYPTO_AES_ARM=m
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_T10DIF=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_MINI_4x6=y
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index ff7985ba226e..7bff7bf24a85 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,8 +1,10 @@
 CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS_ALL=y
@@ -22,10 +24,10 @@ CONFIG_ARCH_MSM8X60=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
 CONFIG_SMP=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
 CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -78,10 +80,14 @@ CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_ZAURUS is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_PMIC8XXX=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8XXX_VIBRATOR=y
+CONFIG_INPUT_PMIC8XXX_PWRKEY=y
 CONFIG_INPUT_UINPUT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_LEGACY_PTYS is not set
@@ -99,16 +105,22 @@ CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ8064=y
 CONFIG_PINCTRL_MSM8960=y
 CONFIG_PINCTRL_MSM8X74=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_THERMAL=y
+CONFIG_MFD_PM8921_CORE=y
 CONFIG_MFD_QCOM_RPM=y
+CONFIG_MFD_SPMI_PMIC=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_FB=y
 CONFIG_SOUND=y
@@ -135,6 +147,7 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PM8XXX=y
 CONFIG_DMADEVICES=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_STAGING=y
@@ -145,16 +158,17 @@ CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_LCC_8960=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
+CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
deleted file mode 100644
index 1da5d9e48224..000000000000
--- a/arch/arm/configs/realview-smp_defconfig
+++ /dev/null
@@ -1,103 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_REALVIEW=y
-CONFIG_MACH_REALVIEW_EB=y
-CONFIG_REALVIEW_EB_ARM11MP=y
-CONFIG_MACH_REALVIEW_PB11MP=y
-CONFIG_SMP=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
-CONFIG_VFP=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_ARM_CHARLCD=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_VERSATILE=y
-CONFIG_SPI=y
-CONFIG_GPIOLIB=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_ARMAACI=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_VERSATILE=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index d02e9d911bb7..9e77dc7b828f 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -1,18 +1,28 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_FULL=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_REALVIEW=y
+CONFIG_REALVIEW_DT=y
 CONFIG_MACH_REALVIEW_EB=y
+CONFIG_REALVIEW_EB_ARM1136=y
+CONFIG_REALVIEW_EB_ARM1176=y
+CONFIG_REALVIEW_EB_A9MP=y
 CONFIG_REALVIEW_EB_ARM11MP=y
+CONFIG_REALVIEW_EB_ARM11MP_REVB=y
 CONFIG_MACH_REALVIEW_PB11MP=y
 CONFIG_MACH_REALVIEW_PB1176=y
+CONFIG_MACH_REALVIEW_PBA8=y
+CONFIG_MACH_REALVIEW_PBX=y
+CONFIG_SMP=y
 CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
@@ -29,28 +39,26 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
+CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_ARM_CHARLCD=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_VERSATILE=y
@@ -69,8 +77,9 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_ARMAACI=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_ISP1760=y
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
@@ -86,17 +95,13 @@ CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index f3142369f594..b3ade552a2a5 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -290,6 +290,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SIMTEC=y
+CONFIG_EEPROM_AT24=y
 CONFIG_SPI=y
 CONFIG_SPI_GPIO=m
 CONFIG_SPI_S3C24XX=m
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index e2f9fa5bb54b..e0f66936ae02 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -5,6 +5,8 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V6=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C64XX=y
 CONFIG_S3C_BOOT_ERROR_RESET=y
 CONFIG_MACH_SMDK6400=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 31eb951880ae..afbda413d61a 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -10,12 +10,11 @@ CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
-CONFIG_SOC_SAM_V7=y
+CONFIG_SOC_SAMA5D2=y
 CONFIG_SOC_SAMA5D3=y
 CONFIG_SOC_SAMA5D4=y
 CONFIG_AEABI=y
@@ -25,12 +24,10 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_ADVANCED_DEBUG=y
 CONFIG_NET=y
@@ -47,7 +44,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
@@ -123,7 +119,6 @@ CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_AT91=y
 CONFIG_I2C_GPIO=y
@@ -134,7 +129,10 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 # CONFIG_HWMON is not set
-CONFIG_SSB=m
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SAMA5D4_WATCHDOG=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ACT8865=y
@@ -142,8 +140,8 @@ CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_VIDEO_ATMEL_ISI=y
+CONFIG_SOC_CAMERA_OV2640=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
@@ -171,6 +169,9 @@ CONFIG_USB_ATMEL_USBA=y
 CONFIG_USB_G_SERIAL=y
 CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_AT91=y
 CONFIG_MMC_ATMELMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -186,6 +187,7 @@ CONFIG_AT_XDMAC=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AT91_ADC=y
+CONFIG_AT91_SAMA5D2_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
 CONFIG_PWM_ATMEL_TCB=y
@@ -207,11 +209,8 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_FTRACE is not set
 CONFIG_DEBUG_USER=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_USER_API_HASH=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=y
 CONFIG_CRYPTO_DEV_ATMEL_TDES=y
 CONFIG_CRYPTO_DEV_ATMEL_SHA=y
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_ITU_T=m
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 89bf31ccfbfa..b7b714c3958c 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -2,14 +2,13 @@ CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_MULTI=y
+CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R7S72100=y
 CONFIG_ARCH_R8A73A4=y
@@ -21,8 +20,6 @@ CONFIG_ARCH_R8A7791=y
 CONFIG_ARCH_R8A7793=y
 CONFIG_ARCH_R8A7794=y
 CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
-CONFIG_CPU_BPREDICT_DISABLE=y
 CONFIG_PL310_ERRATA_588369=y
 CONFIG_ARM_ERRATA_754322=y
 CONFIG_PCI=y
@@ -54,6 +51,8 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
+CONFIG_CAN=y
+CONFIG_CAN_RCAR=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -100,6 +99,7 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=20
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_EMEV2=y
 CONFIG_I2C_GPIO=y
 CONFIG_I2C_RIIC=y
 CONFIG_I2C_SH_MOBILE=y
@@ -136,18 +136,23 @@ CONFIG_SOC_CAMERA=y
 CONFIG_SOC_CAMERA_PLATFORM=y
 CONFIG_VIDEO_RCAR_VIN=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_JPU=y
 CONFIG_VIDEO_RENESAS_VSP1=y
 # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
+CONFIG_DRM_I2C_ADV7511=y
 CONFIG_DRM_RCAR_DU=y
+CONFIG_DRM_RCAR_HDMI=y
+CONFIG_DRM_RCAR_LVDS=y
 CONFIG_FB_SH_MOBILE_LCDC=y
 CONFIG_FB_SH_MOBILE_MERAM=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_BACKLIGHT_AS3711=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
@@ -157,11 +162,12 @@ CONFIG_SND_SOC_RSRC_CARD=y
 CONFIG_SND_SOC_AK4642=y
 CONFIG_SND_SOC_WM8978=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_RCAR=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_R8A66597_HCD=y
 CONFIG_USB_RENESAS_USBHS=y
-CONFIG_USB_RCAR_PHY=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=y
 CONFIG_USB_ETH=y
@@ -175,9 +181,13 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_RS5C372=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_RX8581=y
+CONFIG_RTC_DRV_DA9063=y
 CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_RCAR_DMAC=y
+CONFIG_RENESAS_USB_DMAC=y
+CONFIG_STAGING=y
+CONFIG_STAGING_BOARD=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_IIO=y
 CONFIG_AK8975=y
@@ -197,6 +207,7 @@ CONFIG_NFS_V4_1=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_ARM_UNWIND is not set
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index a2956c3112f1..753f1a5defc7 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
 CONFIG_CPUSETS=y
 CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -36,7 +37,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-CONFIG_IPV6=y
 CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
@@ -57,7 +57,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_STMMAC_ETH=y
-CONFIG_DWMAC_SOCFPGA=y
 CONFIG_MICREL_PHY=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_SERPORT is not set
@@ -83,14 +82,16 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_USB=y
 CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
 CONFIG_MMC=y
 CONFIG_MMC_DW=y
+CONFIG_FPGA=y
+CONFIG_FPGA_MGR_SOCFPGA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_NTFS_RW=y
@@ -107,4 +108,3 @@ CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_ENABLE_DEFAULT_TRACERS=y
 CONFIG_DEBUG_USER=y
-CONFIG_XZ_DEC=y
diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig
index 4725fab562cb..1e5ec2a0e4cf 100644
--- a/arch/arm/configs/stm32_defconfig
+++ b/arch/arm/configs/stm32_defconfig
@@ -52,8 +52,11 @@ CONFIG_SERIAL_STM32_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 51eea220baae..81a1b92fd4e6 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -5,19 +5,18 @@ CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
 CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -31,10 +30,11 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
+CONFIG_CAN=y
+CONFIG_CAN_SUN4I=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_EEPROM_SUNXI_SID=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_AHCI_SUNXI=y
@@ -58,12 +58,13 @@ CONFIG_STMMAC_ETH=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4I_LRADC=y
 # CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AXP20X_PEK=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AXP20X_PEK=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
@@ -80,24 +81,39 @@ CONFIG_SPI_SUN4I=y
 CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_POWER_SUPPLY=y
+CONFIG_AXP20X_POWER=y
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
 CONFIG_MFD_AXP20X=y
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X_RSB=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_SUNXI=y
 CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SUN4I_CODEC=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
 CONFIG_MMC=y
 CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
@@ -119,6 +135,8 @@ CONFIG_PWM=y
 CONFIG_PWM_SUN4I=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index 9808581176cc..3a36244e3cf6 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -1,5 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -60,7 +61,6 @@ CONFIG_INET_ESP=y
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y
 CONFIG_INET6_AH=y
@@ -121,6 +121,9 @@ CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9713 is not set
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MPU3050=y
@@ -142,6 +145,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_PINCTRL_AS3722=y
 CONFIG_PINCTRL_PALMAS=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_PALMAS=y
@@ -208,6 +212,7 @@ CONFIG_SND_SOC_TEGRA=y
 CONFIG_SND_SOC_TEGRA_RT5640=y
 CONFIG_SND_SOC_TEGRA_WM8753=y
 CONFIG_SND_SOC_TEGRA_WM8903=y
+CONFIG_SND_SOC_TEGRA_WM9712=y
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
 CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_SND_SOC_TEGRA_MAX98090=y
@@ -266,10 +271,8 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -278,6 +281,7 @@ CONFIG_SQUASHFS=y
 CONFIG_SQUASHFS_LZO=y
 CONFIG_SQUASHFS_XZ=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index 4bc870028035..0ada29d568ec 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -214,7 +214,6 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_USER=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_SHA256=m
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 07055eacbb0f..a691d590fbd1 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_BU21013=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_RMI4_CORE=y
+CONFIG_RMI4_I2C=y
+CONFIG_RMI4_F11=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index ea49d37564da..295408ea9dc7 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,13 +1,15 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_VERSATILE=y
-CONFIG_MACH_VERSATILE_AB=y
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -47,9 +49,12 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_VERSATILE=y
+CONFIG_SPI=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_MFD_SYSCON=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -59,13 +64,15 @@ CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
 CONFIG_SND_ARMAACI=m
 CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=m
+CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_VERSATILE=y
+CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
 CONFIG_VFAT_FS=m
 CONFIG_JFFS2_FS=y
@@ -82,6 +89,5 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_PL01X=y
 CONFIG_FONTS=y
 CONFIG_FONT_ACORN_8x8=y
diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig
index b200bb0fecdd..ab683fbbb954 100644
--- a/arch/arm/configs/zx_defconfig
+++ b/arch/arm/configs/zx_defconfig
@@ -83,7 +83,6 @@ CONFIG_MMC=y
 CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c
index b445a5d56f43..da3c0428507b 100644
--- a/arch/arm/crypto/aes-ce-glue.c
+++ b/arch/arm/crypto/aes-ce-glue.c
@@ -15,6 +15,7 @@
 #include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <linux/module.h>
+#include <crypto/xts.h>
 
 MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
@@ -152,6 +153,10 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 	struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
 	int ret;
 
+	ret = xts_check_key(tfm, in_key, key_len);
+	if (ret)
+		return ret;
+
 	ret = ce_aes_expandkey(&ctx->key1, in_key, key_len / 2);
 	if (!ret)
 		ret = ce_aes_expandkey(&ctx->key2, &in_key[key_len / 2],
@@ -364,7 +369,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_blkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ce_aes_setkey,
 		.encrypt	= ecb_encrypt,
 		.decrypt	= ecb_decrypt,
@@ -441,7 +446,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_ablkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ablk_set_key,
 		.encrypt	= ablk_encrypt,
 		.decrypt	= ablk_decrypt,
diff --git a/arch/arm/crypto/aesbs-glue.c b/arch/arm/crypto/aesbs-glue.c
index 6d685298690e..0511a6cafe24 100644
--- a/arch/arm/crypto/aesbs-glue.c
+++ b/arch/arm/crypto/aesbs-glue.c
@@ -13,6 +13,7 @@
 #include <crypto/ablk_helper.h>
 #include <crypto/algapi.h>
 #include <linux/module.h>
+#include <crypto/xts.h>
 
 #include "aes_glue.h"
 
@@ -89,6 +90,11 @@ static int aesbs_xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 {
 	struct aesbs_xts_ctx *ctx = crypto_tfm_ctx(tfm);
 	int bits = key_len * 4;
+	int err;
+
+	err = xts_check_key(tfm, in_key, key_len);
+	if (err)
+		return err;
 
 	if (private_AES_set_encrypt_key(in_key, bits, &ctx->enc.rk)) {
 		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index bd425302c97a..55e0e3ea9cb6 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -1,8 +1,10 @@
 
 
 generic-y += bitsperlong.h
+generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += current.h
+generic-y += early_ioremap.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
@@ -22,7 +24,6 @@ generic-y += preempt.h
 generic-y += resource.h
 generic-y += rwsem.h
 generic-y += seccomp.h
-generic-y += sections.h
 generic-y += segment.h
 generic-y += sembuf.h
 generic-y += serial.h
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index 6607d976e07d..e08d15184056 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -21,6 +21,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/io.h>
+#include <asm/barrier.h>
 
 #define __ACCESS_CP15(CRn, Op1, CRm, Op2)	p15, Op1, %0, CRn, CRm, Op2
 #define __ACCESS_CP15_64(Op1, CRm)		p15, Op1, %Q0, %R0, CRm
@@ -116,6 +117,7 @@ static inline u32 gic_read_iar(void)
 	u32 irqstat;
 
 	asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
+	dsb(sy);
 	return irqstat;
 }
 
diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h
index 3ff5642d9788..112cc1a5d47f 100644
--- a/arch/arm/include/asm/barrier.h
+++ b/arch/arm/include/asm/barrier.h
@@ -60,38 +60,11 @@ extern void arm_heavy_mb(void);
 #define dma_wmb()	barrier()
 #endif
 
-#ifndef CONFIG_SMP
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#else
-#define smp_mb()	dmb(ish)
-#define smp_rmb()	smp_mb()
-#define smp_wmb()	dmb(ishst)
-#endif
-
-#define smp_store_release(p, v)						\
-do {									\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	WRITE_ONCE(*p, v);						\
-} while (0)
-
-#define smp_load_acquire(p)						\
-({									\
-	typeof(*p) ___p1 = READ_ONCE(*p);				\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	___p1;								\
-})
-
-#define read_barrier_depends()		do { } while(0)
-#define smp_read_barrier_depends()	do { } while(0)
-
-#define smp_store_mb(var, value)	do { WRITE_ONCE(var, value); smp_mb(); } while (0)
+#define __smp_mb()	dmb(ish)
+#define __smp_rmb()	__smp_mb()
+#define __smp_wmb()	dmb(ishst)
 
-#define smp_mb__before_atomic()	smp_mb()
-#define smp_mb__after_atomic()	smp_mb()
+#include <asm-generic/barrier.h>
 
 #endif /* !__ASSEMBLY__ */
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
index e7335a92144e..4e6e88a6b2f4 100644
--- a/arch/arm/include/asm/bug.h
+++ b/arch/arm/include/asm/bug.h
@@ -5,8 +5,6 @@
 #include <linux/types.h>
 #include <asm/opcodes.h>
 
-#ifdef CONFIG_BUG
-
 /*
  * Use a suitable undefined instruction to use for ARM/Thumb2 bug handling.
  * We need to be careful not to conflict with those used by other modules and
@@ -47,7 +45,7 @@ do {								\
 	unreachable();						\
 } while (0)
 
-#else  /* not CONFIG_DEBUG_BUGVERBOSE */
+#else
 
 #define __BUG(__file, __line, __value)				\
 do {								\
@@ -57,7 +55,6 @@ do {								\
 #endif  /* CONFIG_DEBUG_BUGVERBOSE */
 
 #define HAVE_ARCH_BUG
-#endif  /* CONFIG_BUG */
 
 #include <asm-generic/bug.h>
 
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index d5525bfc7e3e..9156fc303afd 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -491,7 +491,6 @@ static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; }
 #endif
 
 #ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
 void set_kernel_text_rw(void);
 void set_kernel_text_ro(void);
 #else
diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h
index 523315115478..524692f4acab 100644
--- a/arch/arm/include/asm/checksum.h
+++ b/arch/arm/include/asm/checksum.h
@@ -84,10 +84,10 @@ ip_fast_csum(const void *iph, unsigned int ihl)
 }
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
-	u32 lenprot = len | proto << 16;
+	u32 lenprot = len + proto;
 	if (__builtin_constant_p(sum) && sum == 0) {
 		__asm__(
 		"adds	%0, %1, %2	@ csum_tcpudp_nofold0	\n\t"
@@ -121,8 +121,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len,
+		  __u8 proto, __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }
@@ -144,8 +144,8 @@ __csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __
 		__be32 proto, __wsum sum);
 
 static inline __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
-		unsigned short proto, __wsum sum)
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+		__u32 len, __u8 proto, __wsum sum)
 {
 	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
 					   htonl(proto), sum));
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
deleted file mode 100644
index 4e8a4b27d7c7..000000000000
--- a/arch/arm/include/asm/clkdev.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- *  arch/arm/include/asm/clkdev.h
- *
- *  Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#ifndef __ASM_CLKDEV_H
-#define __ASM_CLKDEV_H
-
-#include <linux/slab.h>
-
-#ifndef CONFIG_COMMON_CLK
-#ifdef CONFIG_HAVE_MACH_CLKDEV
-#include <mach/clkdev.h>
-#else
-#define __clk_get(clk)	({ 1; })
-#define __clk_put(clk)	do { } while (0)
-#endif
-#endif
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
-	return kzalloc(size, GFP_KERNEL);
-}
-
-#endif
diff --git a/arch/arm/include/asm/cpuidle.h b/arch/arm/include/asm/cpuidle.h
index 0f8424924902..3848259bebf8 100644
--- a/arch/arm/include/asm/cpuidle.h
+++ b/arch/arm/include/asm/cpuidle.h
@@ -30,7 +30,7 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
 struct device_node;
 
 struct cpuidle_ops {
-	int (*suspend)(int cpu, unsigned long arg);
+	int (*suspend)(unsigned long arg);
 	int (*init)(struct device_node *, int cpu);
 };
 
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 85e374f873ac..b23c6c81c9ad 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -228,10 +228,26 @@ static inline int cpu_is_xsc3(void)
 }
 #endif
 
-#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
-#define	cpu_is_xscale()	0
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) && \
+    !defined(CONFIG_CPU_MOHAWK)
+#define	cpu_is_xscale_family() 0
 #else
-#define	cpu_is_xscale()	1
+static inline int cpu_is_xscale_family(void)
+{
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+
+	switch (id) {
+	case 0x69052000: /* Intel XScale 1 */
+	case 0x69054000: /* Intel XScale 2 */
+	case 0x69056000: /* Intel XScale 3 */
+	case 0x56056000: /* Marvell XScale 3 */
+	case 0x56158000: /* Marvell Mohawk */
+		return 1;
+	}
+
+	return 0;
+}
 #endif
 
 /*
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 662c7bd06108..7d919a9b32e5 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -5,9 +5,9 @@
 #include <asm/compiler.h>
 
 /*
- * The semantics of do_div() are:
+ * The semantics of __div64_32() are:
  *
- * uint32_t do_div(uint64_t *n, uint32_t base)
+ * uint32_t __div64_32(uint64_t *n, uint32_t base)
  * {
  * 	uint32_t remainder = *n % base;
  * 	*n = *n / base;
@@ -16,8 +16,9 @@
  *
  * In other words, a 64-bit dividend with a 32-bit divisor producing
  * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
- * we call a special __do_div64 helper with completely non standard
- * calling convention for arguments and results (beware).
+ * we override the generic version in lib/div64.c to call our __do_div64
+ * assembly implementation with completely non standard calling convention
+ * for arguments and results (beware).
  */
 
 #ifdef __ARMEB__
@@ -28,199 +29,101 @@
 #define __xh "r1"
 #endif
 
-#define __do_div_asm(n, base)					\
-({								\
-	register unsigned int __base      asm("r4") = base;	\
-	register unsigned long long __n   asm("r0") = n;	\
-	register unsigned long long __res asm("r2");		\
-	register unsigned int __rem       asm(__xh);		\
-	asm(	__asmeq("%0", __xh)				\
-		__asmeq("%1", "r2")				\
-		__asmeq("%2", "r0")				\
-		__asmeq("%3", "r4")				\
-		"bl	__do_div64"				\
-		: "=r" (__rem), "=r" (__res)			\
-		: "r" (__n), "r" (__base)			\
-		: "ip", "lr", "cc");				\
-	n = __res;						\
-	__rem;							\
-})
-
-#if __GNUC__ < 4 || !defined(CONFIG_AEABI)
+static inline uint32_t __div64_32(uint64_t *n, uint32_t base)
+{
+	register unsigned int __base      asm("r4") = base;
+	register unsigned long long __n   asm("r0") = *n;
+	register unsigned long long __res asm("r2");
+	register unsigned int __rem       asm(__xh);
+	asm(	__asmeq("%0", __xh)
+		__asmeq("%1", "r2")
+		__asmeq("%2", "r0")
+		__asmeq("%3", "r4")
+		"bl	__do_div64"
+		: "=r" (__rem), "=r" (__res)
+		: "r" (__n), "r" (__base)
+		: "ip", "lr", "cc");
+	*n = __res;
+	return __rem;
+}
+#define __div64_32 __div64_32
+
+#if !defined(CONFIG_AEABI)
 
 /*
- * gcc versions earlier than 4.0 are simply too problematic for the
- * optimized implementation below. First there is gcc PR 15089 that
- * tend to trig on more complex constructs, spurious .global __udivsi3
- * are inserted even if none of those symbols are referenced in the
- * generated code, and those gcc versions are not able to do constant
- * propagation on long long values anyway.
+ * In OABI configurations, some uses of the do_div function
+ * cause gcc to run out of registers. To work around that,
+ * we can force the use of the out-of-line version for
+ * configurations that build a OABI kernel.
  */
-#define do_div(n, base) __do_div_asm(n, base)
-
-#elif __GNUC__ >= 4
+#define do_div(n, base) __div64_32(&(n), base)
 
-#include <asm/bug.h>
+#else
 
 /*
- * If the divisor happens to be constant, we determine the appropriate
- * inverse at compile time to turn the division into a few inline
- * multiplications instead which is much faster. And yet only if compiling
- * for ARMv4 or higher (we need umull/umlal) and if the gcc version is
- * sufficiently recent to perform proper long long constant propagation.
- * (It is unfortunate that gcc doesn't perform all this internally.)
+ * gcc versions earlier than 4.0 are simply too problematic for the
+ * __div64_const32() code in asm-generic/div64.h. First there is
+ * gcc PR 15089 that tend to trig on more complex constructs, spurious
+ * .global __udivsi3 are inserted even if none of those symbols are
+ * referenced in the generated code, and those gcc versions are not able
+ * to do constant propagation on long long values anyway.
  */
-#define do_div(n, base)							\
-({									\
-	unsigned int __r, __b = (base);					\
-	if (!__builtin_constant_p(__b) || __b == 0 ||			\
-	    (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) {	\
-		/* non-constant divisor (or zero): slow path */		\
-		__r = __do_div_asm(n, __b);				\
-	} else if ((__b & (__b - 1)) == 0) {				\
-		/* Trivial: __b is constant and a power of 2 */		\
-		/* gcc does the right thing with this code.  */		\
-		__r = n;						\
-		__r &= (__b - 1);					\
-		n /= __b;						\
-	} else {							\
-		/* Multiply by inverse of __b: n/b = n*(p/b)/p       */	\
-		/* We rely on the fact that most of this code gets   */	\
-		/* optimized away at compile time due to constant    */	\
-		/* propagation and only a couple inline assembly     */	\
-		/* instructions should remain. Better avoid any      */	\
-		/* code construct that might prevent that.           */	\
-		unsigned long long __res, __x, __t, __m, __n = n;	\
-		unsigned int __c, __p, __z = 0;				\
-		/* preserve low part of n for reminder computation */	\
-		__r = __n;						\
-		/* determine number of bits to represent __b */		\
-		__p = 1 << __div64_fls(__b);				\
-		/* compute __m = ((__p << 64) + __b - 1) / __b */	\
-		__m = (~0ULL / __b) * __p;				\
-		__m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b;	\
-		/* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */	\
-		__x = ~0ULL / __b * __b - 1;				\
-		__res = (__m & 0xffffffff) * (__x & 0xffffffff);	\
-		__res >>= 32;						\
-		__res += (__m & 0xffffffff) * (__x >> 32);		\
-		__t = __res;						\
-		__res += (__x & 0xffffffff) * (__m >> 32);		\
-		__t = (__res < __t) ? (1ULL << 32) : 0;			\
-		__res = (__res >> 32) + __t;				\
-		__res += (__m >> 32) * (__x >> 32);			\
-		__res /= __p;						\
-		/* Now sanitize and optimize what we've got. */		\
-		if (~0ULL % (__b / (__b & -__b)) == 0) {		\
-			/* those cases can be simplified with: */	\
-			__n /= (__b & -__b);				\
-			__m = ~0ULL / (__b / (__b & -__b));		\
-			__p = 1;					\
-			__c = 1;					\
-		} else if (__res != __x / __b) {			\
-			/* We can't get away without a correction    */	\
-			/* to compensate for bit truncation errors.  */	\
-			/* To avoid it we'd need an additional bit   */	\
-			/* to represent __m which would overflow it. */	\
-			/* Instead we do m=p/b and n/b=(n*m+m)/p.    */	\
-			__c = 1;					\
-			/* Compute __m = (__p << 64) / __b */		\
-			__m = (~0ULL / __b) * __p;			\
-			__m += ((~0ULL % __b + 1) * __p) / __b;		\
-		} else {						\
-			/* Reduce __m/__p, and try to clear bit 31   */	\
-			/* of __m when possible otherwise that'll    */	\
-			/* need extra overflow handling later.       */	\
-			unsigned int __bits = -(__m & -__m);		\
-			__bits |= __m >> 32;				\
-			__bits = (~__bits) << 1;			\
-			/* If __bits == 0 then setting bit 31 is     */	\
-			/* unavoidable.  Simply apply the maximum    */	\
-			/* possible reduction in that case.          */	\
-			/* Otherwise the MSB of __bits indicates the */	\
-			/* best reduction we should apply.           */	\
-			if (!__bits) {					\
-				__p /= (__m & -__m);			\
-				__m /= (__m & -__m);			\
-			} else {					\
-				__p >>= __div64_fls(__bits);		\
-				__m >>= __div64_fls(__bits);		\
-			}						\
-			/* No correction needed. */			\
-			__c = 0;					\
-		}							\
-		/* Now we have a combination of 2 conditions:        */	\
-		/* 1) whether or not we need a correction (__c), and */	\
-		/* 2) whether or not there might be an overflow in   */	\
-		/*    the cross product (__m & ((1<<63) | (1<<31)))  */	\
-		/* Select the best insn combination to perform the   */	\
-		/* actual __m * __n / (__p << 64) operation.         */	\
-		if (!__c) {						\
-			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {	\
-			__res = __m;					\
-			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"mov	%Q0, #0"			\
-				: "+&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
-				"cmn	%Q0, %Q1\n\t"			\
-				"adcs	%R0, %R0, %R1\n\t"		\
-				"adc	%Q0, %3, #0"			\
-				: "=&r" (__res)				\
-				: "r" (__m), "r" (__n), "r" (__z)	\
-				: "cc" );				\
-		}							\
-		if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {		\
-			asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"		\
-				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"umlal	%Q0, %R0, %R1, %R2"		\
-				: "+&r" (__res)				\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		} else {						\
-			asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"		\
-				"umlal	%R0, %1, %Q2, %R3\n\t"		\
-				"mov	%R0, #0\n\t"			\
-				"adds	%Q0, %1, %Q0\n\t"		\
-				"adc	%R0, %R0, #0\n\t"		\
-				"umlal	%Q0, %R0, %R2, %R3"		\
-				: "+&r" (__res), "+&r" (__z)		\
-				: "r" (__m), "r" (__n)			\
-				: "cc" );				\
-		}							\
-		__res /= __p;						\
-		/* The reminder can be computed with 32-bit regs     */	\
-		/* only, and gcc is good at that.                    */	\
-		{							\
-			unsigned int __res0 = __res;			\
-			unsigned int __b0 = __b;			\
-			__r -= __res0 * __b0;				\
-		}							\
-		/* BUG_ON(__r >= __b || __res * __b + __r != n); */	\
-		n = __res;						\
-	}								\
-	__r;								\
-})
-
-/* our own fls implementation to make sure constant propagation is fine */
-#define __div64_fls(bits)						\
-({									\
-	unsigned int __left = (bits), __nr = 0;				\
-	if (__left & 0xffff0000) __nr += 16, __left >>= 16;		\
-	if (__left & 0x0000ff00) __nr +=  8, __left >>=  8;		\
-	if (__left & 0x000000f0) __nr +=  4, __left >>=  4;		\
-	if (__left & 0x0000000c) __nr +=  2, __left >>=  2;		\
-	if (__left & 0x00000002) __nr +=  1;				\
-	__nr;								\
-})
+
+#define __div64_const32_is_OK (__GNUC__ >= 4)
+
+static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
+{
+	unsigned long long res;
+	register unsigned int tmp asm("ip") = 0;
+
+	if (!bias) {
+		asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"
+			"mov	%Q0, #0"
+			: "=&r" (res)
+			: "r" (m), "r" (n)
+			: "cc");
+	} else if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+		res = m;
+		asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"
+			"mov	%Q0, #0"
+			: "+&r" (res)
+			: "r" (m), "r" (n)
+			: "cc");
+	} else {
+		asm (	"umull	%Q0, %R0, %Q2, %Q3\n\t"
+			"cmn	%Q0, %Q2\n\t"
+			"adcs	%R0, %R0, %R2\n\t"
+			"adc	%Q0, %1, #0"
+			: "=&r" (res), "+&r" (tmp)
+			: "r" (m), "r" (n)
+			: "cc");
+	}
+
+	if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
+		asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"
+			"umlal	%R0, %Q0, %Q1, %R2\n\t"
+			"mov	%R0, #0\n\t"
+			"umlal	%Q0, %R0, %R1, %R2"
+			: "+&r" (res)
+			: "r" (m), "r" (n)
+			: "cc");
+	} else {
+		asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"
+			"umlal	%R0, %1, %Q2, %R3\n\t"
+			"mov	%R0, #0\n\t"
+			"adds	%Q0, %1, %Q0\n\t"
+			"adc	%R0, %R0, #0\n\t"
+			"umlal	%Q0, %R0, %R2, %R3"
+			: "+&r" (res), "+&r" (tmp)
+			: "r" (m), "r" (n)
+			: "cc");
+	}
+
+	return res;
+}
+#define __arch_xprod_64 __arch_xprod_64
+
+#include <asm-generic/div64.h>
 
 #endif
 
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ccb3aa64640d..6ad1ceda62a5 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -41,13 +41,6 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 #define HAVE_ARCH_DMA_SUPPORTED 1
 extern int dma_supported(struct device *dev, u64 mask);
 
-/*
- * Note that while the generic code provides dummy dma_{alloc,free}_noncoherent
- * implementations, we don't provide a dma_cache_sync function so drivers using
- * this API are highlighted with build warnings.
- */
-#include <asm-generic/dma-mapping-common.h>
-
 #ifdef __arch_page_to_dma
 #error Please update to __arch_pfn_to_dma
 #endif
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
new file mode 100644
index 000000000000..e0eea72deb87
--- /dev/null
+++ b/arch/arm/include/asm/efi.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_EFI_H
+#define __ASM_ARM_EFI_H
+
+#include <asm/cacheflush.h>
+#include <asm/cachetype.h>
+#include <asm/early_ioremap.h>
+#include <asm/fixmap.h>
+#include <asm/highmem.h>
+#include <asm/mach/map.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+
+#ifdef CONFIG_EFI
+void efi_init(void);
+
+int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
+
+#define efi_call_virt(f, ...)						\
+({									\
+	efi_##f##_t *__f;						\
+	efi_status_t __s;						\
+									\
+	efi_virtmap_load();						\
+	__f = efi.systab->runtime->f;					\
+	__s = __f(__VA_ARGS__);						\
+	efi_virtmap_unload();						\
+	__s;								\
+})
+
+#define __efi_call_virt(f, ...)						\
+({									\
+	efi_##f##_t *__f;						\
+									\
+	efi_virtmap_load();						\
+	__f = efi.systab->runtime->f;					\
+	__f(__VA_ARGS__);						\
+	efi_virtmap_unload();						\
+})
+
+static inline void efi_set_pgd(struct mm_struct *mm)
+{
+	check_and_switch_context(mm, NULL);
+}
+
+void efi_virtmap_load(void);
+void efi_virtmap_unload(void);
+
+#else
+#define efi_init()
+#endif /* CONFIG_EFI */
+
+/* arch specific definitions used by the stub code */
+
+#define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__)
+
+/*
+ * A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
+ * so we will reserve that amount of memory. We have no easy way to tell what
+ * the actuall size of code + data the uncompressed kernel will use.
+ * If this is insufficient, the decompressor will relocate itself out of the
+ * way before performing the decompression.
+ */
+#define MAX_UNCOMP_KERNEL_SIZE	SZ_32M
+
+/*
+ * The kernel zImage should preferably be located between 32 MB and 128 MB
+ * from the base of DRAM. The min address leaves space for a maximal size
+ * uncompressed image, and the max address is due to how the zImage decompressor
+ * picks a destination address.
+ */
+#define ZIMAGE_OFFSET_LIMIT	SZ_128M
+#define MIN_ZIMAGE_OFFSET	MAX_UNCOMP_KERNEL_SIZE
+#define MAX_FDT_OFFSET		ZIMAGE_OFFSET_LIMIT
+
+#endif /* _ASM_ARM_EFI_H */
diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h
index 5abaf5bbd985..bf1991263d2d 100644
--- a/arch/arm/include/asm/exception.h
+++ b/arch/arm/include/asm/exception.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_ARM_EXCEPTION_H
 #define __ASM_ARM_EXCEPTION_H
 
-#include <linux/ftrace.h>
+#include <linux/interrupt.h>
 
 #define __exception	__attribute__((section(".exception.text")))
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
diff --git a/arch/arm/include/asm/fixmap.h b/arch/arm/include/asm/fixmap.h
index 58cfe9f1a687..5c17d2dec777 100644
--- a/arch/arm/include/asm/fixmap.h
+++ b/arch/arm/include/asm/fixmap.h
@@ -19,20 +19,47 @@ enum fixed_addresses {
 	FIX_TEXT_POKE0,
 	FIX_TEXT_POKE1,
 
-	__end_of_fixed_addresses
+	__end_of_fixmap_region,
+
+	/*
+	 * Share the kmap() region with early_ioremap(): this is guaranteed
+	 * not to clash since early_ioremap() is only available before
+	 * paging_init(), and kmap() only after.
+	 */
+#define NR_FIX_BTMAPS		32
+#define FIX_BTMAPS_SLOTS	7
+#define TOTAL_FIX_BTMAPS	(NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
+
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
+	__end_of_early_ioremap_region
 };
 
+static const enum fixed_addresses __end_of_fixed_addresses =
+	__end_of_fixmap_region > __end_of_early_ioremap_region ?
+	__end_of_fixmap_region : __end_of_early_ioremap_region;
+
 #define FIXMAP_PAGE_COMMON	(L_PTE_YOUNG | L_PTE_PRESENT | L_PTE_XN | L_PTE_DIRTY)
 
 #define FIXMAP_PAGE_NORMAL	(FIXMAP_PAGE_COMMON | L_PTE_MT_WRITEBACK)
+#define FIXMAP_PAGE_RO		(FIXMAP_PAGE_NORMAL | L_PTE_RDONLY)
 
 /* Used by set_fixmap_(io|nocache), both meant for mapping a device */
 #define FIXMAP_PAGE_IO		(FIXMAP_PAGE_COMMON | L_PTE_MT_DEV_SHARED | L_PTE_SHARED)
 #define FIXMAP_PAGE_NOCACHE	FIXMAP_PAGE_IO
 
+#define __early_set_fixmap	__set_fixmap
+
+#ifdef CONFIG_MMU
+
 void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot);
 void __init early_fixmap_init(void);
 
 #include <asm-generic/fixmap.h>
 
+#else
+
+static inline void early_fixmap_init(void) { }
+
+#endif
 #endif
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index fe3ea776dc34..3d7351c844aa 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,7 +5,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	8
+#define NR_IPI	7
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm/include/asm/hardware/cache-uniphier.h b/arch/arm/include/asm/hardware/cache-uniphier.h
new file mode 100644
index 000000000000..102e3fbe1e10
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-uniphier.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CACHE_UNIPHIER_H
+#define __CACHE_UNIPHIER_H
+
+#include <linux/types.h>
+
+#ifdef CONFIG_CACHE_UNIPHIER
+int uniphier_cache_init(void);
+int uniphier_cache_l2_is_enabled(void);
+void uniphier_cache_l2_touch_range(unsigned long start, unsigned long end);
+void uniphier_cache_l2_set_locked_ways(u32 way_mask);
+#else
+static inline int uniphier_cache_init(void)
+{
+	return -ENODEV;
+}
+
+static inline int uniphier_cache_l2_is_enabled(void)
+{
+	return 0;
+}
+
+static inline void uniphier_cache_l2_touch_range(unsigned long start,
+						 unsigned long end)
+{
+}
+
+static inline void uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+}
+#endif
+
+#endif /* __CACHE_UNIPHIER_H */
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 535579511ed0..0a0e2d1784c0 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -68,7 +68,6 @@ extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(const void *ptr);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index be1d07d59ee9..1bd9510de1b9 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -40,6 +40,11 @@ extern void arch_trigger_all_cpu_backtrace(bool);
 #define arch_trigger_all_cpu_backtrace(x) arch_trigger_all_cpu_backtrace(x)
 #endif
 
+static inline int nr_legacy_irqs(void)
+{
+	return NR_IRQS_LEGACY;
+}
+
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h
index dc641ddf0784..e22089fb44dc 100644
--- a/arch/arm/include/asm/kvm_arm.h
+++ b/arch/arm/include/asm/kvm_arm.h
@@ -19,6 +19,7 @@
 #ifndef __ARM_KVM_ARM_H__
 #define __ARM_KVM_ARM_H__
 
+#include <linux/const.h>
 #include <linux/types.h>
 
 /* Hyp Configuration Register (HCR) bits */
@@ -132,10 +133,9 @@
  * space.
  */
 #define KVM_PHYS_SHIFT	(40)
-#define KVM_PHYS_SIZE	(1ULL << KVM_PHYS_SHIFT)
-#define KVM_PHYS_MASK	(KVM_PHYS_SIZE - 1ULL)
-#define PTRS_PER_S2_PGD	(1ULL << (KVM_PHYS_SHIFT - 30))
-#define S2_PGD_ORDER	get_order(PTRS_PER_S2_PGD * sizeof(pgd_t))
+#define KVM_PHYS_SIZE	(_AC(1, ULL) << KVM_PHYS_SHIFT)
+#define KVM_PHYS_MASK	(KVM_PHYS_SIZE - _AC(1, ULL))
+#define PTRS_PER_S2_PGD	(_AC(1, ULL) << (KVM_PHYS_SHIFT - 30))
 
 /* Virtualization Translation Control Register (VTCR) bits */
 #define VTCR_SH0	(3 << 12)
@@ -162,17 +162,17 @@
 #define VTTBR_X		(5 - KVM_T0SZ)
 #endif
 #define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
-#define VTTBR_BADDR_MASK  (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
-#define VTTBR_VMID_SHIFT  (48LLU)
-#define VTTBR_VMID_MASK	  (0xffLLU << VTTBR_VMID_SHIFT)
+#define VTTBR_BADDR_MASK  (((_AC(1, ULL) << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+#define VTTBR_VMID_SHIFT  _AC(48, ULL)
+#define VTTBR_VMID_MASK(size)	(_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT)
 
 /* Hyp Syndrome Register (HSR) bits */
 #define HSR_EC_SHIFT	(26)
-#define HSR_EC		(0x3fU << HSR_EC_SHIFT)
-#define HSR_IL		(1U << 25)
+#define HSR_EC		(_AC(0x3f, UL) << HSR_EC_SHIFT)
+#define HSR_IL		(_AC(1, UL) << 25)
 #define HSR_ISS		(HSR_IL - 1)
 #define HSR_ISV_SHIFT	(24)
-#define HSR_ISV		(1U << HSR_ISV_SHIFT)
+#define HSR_ISV		(_AC(1, UL) << HSR_ISV_SHIFT)
 #define HSR_SRT_SHIFT	(16)
 #define HSR_SRT_MASK	(0xf << HSR_SRT_SHIFT)
 #define HSR_FSC		(0x3f)
@@ -180,9 +180,9 @@
 #define HSR_SSE		(1 << 21)
 #define HSR_WNR		(1 << 6)
 #define HSR_CV_SHIFT	(24)
-#define HSR_CV		(1U << HSR_CV_SHIFT)
+#define HSR_CV		(_AC(1, UL) << HSR_CV_SHIFT)
 #define HSR_COND_SHIFT	(20)
-#define HSR_COND	(0xfU << HSR_COND_SHIFT)
+#define HSR_COND	(_AC(0xf, UL) << HSR_COND_SHIFT)
 
 #define FSC_FAULT	(0x04)
 #define FSC_ACCESS	(0x08)
@@ -210,13 +210,13 @@
 #define HSR_EC_DABT	(0x24)
 #define HSR_EC_DABT_HYP	(0x25)
 
-#define HSR_WFI_IS_WFE		(1U << 0)
+#define HSR_WFI_IS_WFE		(_AC(1, UL) << 0)
 
-#define HSR_HVC_IMM_MASK	((1UL << 16) - 1)
+#define HSR_HVC_IMM_MASK	((_AC(1, UL) << 16) - 1)
 
-#define HSR_DABT_S1PTW		(1U << 7)
-#define HSR_DABT_CM		(1U << 8)
-#define HSR_DABT_EA		(1U << 9)
+#define HSR_DABT_S1PTW		(_AC(1, UL) << 7)
+#define HSR_DABT_CM		(_AC(1, UL) << 8)
+#define HSR_DABT_EA		(_AC(1, UL) << 9)
 
 #define kvm_arm_exception_type	\
 	{0, "RESET" }, 		\
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
index 194c91b610ff..3d5a5cd071bd 100644
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -19,38 +19,7 @@
 #ifndef __ARM_KVM_ASM_H__
 #define __ARM_KVM_ASM_H__
 
-/* 0 is reserved as an invalid value. */
-#define c0_MPIDR	1	/* MultiProcessor ID Register */
-#define c0_CSSELR	2	/* Cache Size Selection Register */
-#define c1_SCTLR	3	/* System Control Register */
-#define c1_ACTLR	4	/* Auxiliary Control Register */
-#define c1_CPACR	5	/* Coprocessor Access Control */
-#define c2_TTBR0	6	/* Translation Table Base Register 0 */
-#define c2_TTBR0_high	7	/* TTBR0 top 32 bits */
-#define c2_TTBR1	8	/* Translation Table Base Register 1 */
-#define c2_TTBR1_high	9	/* TTBR1 top 32 bits */
-#define c2_TTBCR	10	/* Translation Table Base Control R. */
-#define c3_DACR		11	/* Domain Access Control Register */
-#define c5_DFSR		12	/* Data Fault Status Register */
-#define c5_IFSR		13	/* Instruction Fault Status Register */
-#define c5_ADFSR	14	/* Auxilary Data Fault Status R */
-#define c5_AIFSR	15	/* Auxilary Instrunction Fault Status R */
-#define c6_DFAR		16	/* Data Fault Address Register */
-#define c6_IFAR		17	/* Instruction Fault Address Register */
-#define c7_PAR		18	/* Physical Address Register */
-#define c7_PAR_high	19	/* PAR top 32 bits */
-#define c9_L2CTLR	20	/* Cortex A15/A7 L2 Control Register */
-#define c10_PRRR	21	/* Primary Region Remap Register */
-#define c10_NMRR	22	/* Normal Memory Remap Register */
-#define c12_VBAR	23	/* Vector Base Address Register */
-#define c13_CID		24	/* Context ID Register */
-#define c13_TID_URW	25	/* Thread ID, User R/W */
-#define c13_TID_URO	26	/* Thread ID, User R/O */
-#define c13_TID_PRIV	27	/* Thread ID, Privileged */
-#define c14_CNTKCTL	28	/* Timer Control Register (PL1) */
-#define c10_AMAIR0	29	/* Auxilary Memory Attribute Indirection Reg0 */
-#define c10_AMAIR1	30	/* Auxilary Memory Attribute Indirection Reg1 */
-#define NR_CP15_REGS	31	/* Number of regs (incl. invalid) */
+#include <asm/virt.h>
 
 #define ARM_EXCEPTION_RESET	  0
 #define ARM_EXCEPTION_UNDEFINED   1
@@ -79,6 +48,8 @@
 #define rr_lo_hi(a1, a2) a1, a2
 #endif
 
+#define kvm_ksym_ref(kva)	(kva)
+
 #ifndef __ASSEMBLY__
 struct kvm;
 struct kvm_vcpu;
@@ -86,19 +57,15 @@ struct kvm_vcpu;
 extern char __kvm_hyp_init[];
 extern char __kvm_hyp_init_end[];
 
-extern char __kvm_hyp_exit[];
-extern char __kvm_hyp_exit_end[];
-
 extern char __kvm_hyp_vector[];
 
-extern char __kvm_hyp_code_start[];
-extern char __kvm_hyp_code_end[];
-
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
 
 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
+
+extern void __init_stage2_translation(void);
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
index a9c80a2ea1a7..ee5328fc4b06 100644
--- a/arch/arm/include/asm/kvm_emulate.h
+++ b/arch/arm/include/asm/kvm_emulate.h
@@ -28,6 +28,18 @@
 unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num);
 unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu);
 
+static inline unsigned long vcpu_get_reg(struct kvm_vcpu *vcpu,
+					 u8 reg_num)
+{
+	return *vcpu_reg(vcpu, reg_num);
+}
+
+static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num,
+				unsigned long val)
+{
+	*vcpu_reg(vcpu, reg_num) = val;
+}
+
 bool kvm_condition_valid(struct kvm_vcpu *vcpu);
 void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr);
 void kvm_inject_undefined(struct kvm_vcpu *vcpu);
@@ -56,12 +68,12 @@ static inline bool vcpu_mode_is_32bit(struct kvm_vcpu *vcpu)
 
 static inline unsigned long *vcpu_pc(struct kvm_vcpu *vcpu)
 {
-	return &vcpu->arch.regs.usr_regs.ARM_pc;
+	return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_pc;
 }
 
 static inline unsigned long *vcpu_cpsr(struct kvm_vcpu *vcpu)
 {
-	return &vcpu->arch.regs.usr_regs.ARM_cpsr;
+	return &vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr;
 }
 
 static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
@@ -71,13 +83,13 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
 
 static inline bool mode_has_spsr(struct kvm_vcpu *vcpu)
 {
-	unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK;
+	unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK;
 	return (cpsr_mode > USR_MODE && cpsr_mode < SYSTEM_MODE);
 }
 
 static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu)
 {
-	unsigned long cpsr_mode = vcpu->arch.regs.usr_regs.ARM_cpsr & MODE_MASK;
+	unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK;
 	return cpsr_mode > USR_MODE;;
 }
 
@@ -96,11 +108,6 @@ static inline phys_addr_t kvm_vcpu_get_fault_ipa(struct kvm_vcpu *vcpu)
 	return ((phys_addr_t)vcpu->arch.fault.hpfar & HPFAR_MASK) << 8;
 }
 
-static inline unsigned long kvm_vcpu_get_hyp_pc(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.fault.hyp_pc;
-}
-
 static inline bool kvm_vcpu_dabt_isvalid(struct kvm_vcpu *vcpu)
 {
 	return kvm_vcpu_get_hsr(vcpu) & HSR_ISV;
@@ -131,6 +138,11 @@ static inline bool kvm_vcpu_dabt_iss1tw(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_get_hsr(vcpu) & HSR_DABT_S1PTW;
 }
 
+static inline bool kvm_vcpu_dabt_is_cm(struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_hsr(vcpu) & HSR_DABT_CM);
+}
+
 /* Get Access Size from a data abort */
 static inline int kvm_vcpu_dabt_get_as(struct kvm_vcpu *vcpu)
 {
@@ -180,7 +192,7 @@ static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
 
 static inline unsigned long kvm_vcpu_get_mpidr_aff(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.cp15[c0_MPIDR] & MPIDR_HWID_BITMASK;
+	return vcpu_cp15(vcpu, c0_MPIDR) & MPIDR_HWID_BITMASK;
 }
 
 static inline void kvm_vcpu_set_be(struct kvm_vcpu *vcpu)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 6692982c9b57..385070180c25 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -85,20 +85,61 @@ struct kvm_vcpu_fault_info {
 	u32 hsr;		/* Hyp Syndrome Register */
 	u32 hxfar;		/* Hyp Data/Inst. Fault Address Register */
 	u32 hpfar;		/* Hyp IPA Fault Address Register */
-	u32 hyp_pc;		/* PC when exception was taken from Hyp mode */
 };
 
-typedef struct vfp_hard_struct kvm_cpu_context_t;
+/*
+ * 0 is reserved as an invalid value.
+ * Order should be kept in sync with the save/restore code.
+ */
+enum vcpu_sysreg {
+	__INVALID_SYSREG__,
+	c0_MPIDR,		/* MultiProcessor ID Register */
+	c0_CSSELR,		/* Cache Size Selection Register */
+	c1_SCTLR,		/* System Control Register */
+	c1_ACTLR,		/* Auxiliary Control Register */
+	c1_CPACR,		/* Coprocessor Access Control */
+	c2_TTBR0,		/* Translation Table Base Register 0 */
+	c2_TTBR0_high,		/* TTBR0 top 32 bits */
+	c2_TTBR1,		/* Translation Table Base Register 1 */
+	c2_TTBR1_high,		/* TTBR1 top 32 bits */
+	c2_TTBCR,		/* Translation Table Base Control R. */
+	c3_DACR,		/* Domain Access Control Register */
+	c5_DFSR,		/* Data Fault Status Register */
+	c5_IFSR,		/* Instruction Fault Status Register */
+	c5_ADFSR,		/* Auxilary Data Fault Status R */
+	c5_AIFSR,		/* Auxilary Instrunction Fault Status R */
+	c6_DFAR,		/* Data Fault Address Register */
+	c6_IFAR,		/* Instruction Fault Address Register */
+	c7_PAR,			/* Physical Address Register */
+	c7_PAR_high,		/* PAR top 32 bits */
+	c9_L2CTLR,		/* Cortex A15/A7 L2 Control Register */
+	c10_PRRR,		/* Primary Region Remap Register */
+	c10_NMRR,		/* Normal Memory Remap Register */
+	c12_VBAR,		/* Vector Base Address Register */
+	c13_CID,		/* Context ID Register */
+	c13_TID_URW,		/* Thread ID, User R/W */
+	c13_TID_URO,		/* Thread ID, User R/O */
+	c13_TID_PRIV,		/* Thread ID, Privileged */
+	c14_CNTKCTL,		/* Timer Control Register (PL1) */
+	c10_AMAIR0,		/* Auxilary Memory Attribute Indirection Reg0 */
+	c10_AMAIR1,		/* Auxilary Memory Attribute Indirection Reg1 */
+	NR_CP15_REGS		/* Number of regs (incl. invalid) */
+};
+
+struct kvm_cpu_context {
+	struct kvm_regs	gp_regs;
+	struct vfp_hard_struct vfp;
+	u32 cp15[NR_CP15_REGS];
+};
+
+typedef struct kvm_cpu_context kvm_cpu_context_t;
 
 struct kvm_vcpu_arch {
-	struct kvm_regs regs;
+	struct kvm_cpu_context ctxt;
 
 	int target; /* Processor target */
 	DECLARE_BITMAP(features, KVM_VCPU_MAX_FEATURES);
 
-	/* System control coprocessor (cp15) */
-	u32 cp15[NR_CP15_REGS];
-
 	/* The CPU type we expose to the VM */
 	u32 midr;
 
@@ -111,9 +152,6 @@ struct kvm_vcpu_arch {
 	/* Exception Information */
 	struct kvm_vcpu_fault_info fault;
 
-	/* Floating point registers (VFP and Advanced SIMD/NEON) */
-	struct vfp_hard_struct vfp_guest;
-
 	/* Host FP context */
 	kvm_cpu_context_t *host_cpu_context;
 
@@ -150,14 +188,22 @@ struct kvm_vcpu_stat {
 	u32 halt_successful_poll;
 	u32 halt_attempted_poll;
 	u32 halt_wakeup;
+	u32 hvc_exit_stat;
+	u64 wfe_exit_stat;
+	u64 wfi_exit_stat;
+	u64 mmio_exit_user;
+	u64 mmio_exit_kernel;
+	u64 exits;
 };
 
+#define vcpu_cp15(v,r)	(v)->arch.ctxt.cp15[r]
+
 int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init);
 unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
 int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
 int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
 int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
-u64 kvm_call_hyp(void *hypfn, ...);
+unsigned long kvm_call_hyp(void *hypfn, ...);
 void force_vm_exit(const cpumask_t *mask);
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
@@ -214,6 +260,11 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
 	kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
 }
 
+static inline void __cpu_init_stage2(void)
+{
+	kvm_call_hyp(__init_stage2_translation);
+}
+
 static inline int kvm_arch_dev_ioctl_check_extension(long ext)
 {
 	return 0;
@@ -236,5 +287,20 @@ static inline void kvm_arm_init_debug(void) {}
 static inline void kvm_arm_setup_debug(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arm_clear_debug(struct kvm_vcpu *vcpu) {}
 static inline void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu) {}
+static inline int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
+					     struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
+static inline int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
+					     struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
+static inline int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
+					     struct kvm_device_attr *attr)
+{
+	return -ENXIO;
+}
 
 #endif /* __ARM_KVM_HOST_H__ */
diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h
new file mode 100644
index 000000000000..f0e860761380
--- /dev/null
+++ b/arch/arm/include/asm/kvm_hyp.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_KVM_HYP_H__
+#define __ARM_KVM_HYP_H__
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_mmu.h>
+#include <asm/vfp.h>
+
+#define __hyp_text __section(.hyp.text) notrace
+
+#define kern_hyp_va(v) (v)
+#define hyp_kern_va(v) (v)
+
+#define __ACCESS_CP15(CRn, Op1, CRm, Op2)	\
+	"mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32
+#define __ACCESS_CP15_64(Op1, CRm)		\
+	"mrrc", "mcrr", __stringify(p15, Op1, %Q0, %R0, CRm), u64
+#define __ACCESS_VFP(CRn)			\
+	"mrc", "mcr", __stringify(p10, 7, %0, CRn, cr0, 0), u32
+
+#define __write_sysreg(v, r, w, c, t)	asm volatile(w " " c : : "r" ((t)(v)))
+#define write_sysreg(v, ...)		__write_sysreg(v, __VA_ARGS__)
+
+#define __read_sysreg(r, w, c, t) ({				\
+	t __val;						\
+	asm volatile(r " " c : "=r" (__val));			\
+	__val;							\
+})
+#define read_sysreg(...)		__read_sysreg(__VA_ARGS__)
+
+#define write_special(v, r)					\
+	asm volatile("msr " __stringify(r) ", %0" : : "r" (v))
+#define read_special(r) ({					\
+	u32 __val;						\
+	asm volatile("mrs %0, " __stringify(r) : "=r" (__val));	\
+	__val;							\
+})
+
+#define TTBR0		__ACCESS_CP15_64(0, c2)
+#define TTBR1		__ACCESS_CP15_64(1, c2)
+#define VTTBR		__ACCESS_CP15_64(6, c2)
+#define PAR		__ACCESS_CP15_64(0, c7)
+#define CNTV_CVAL	__ACCESS_CP15_64(3, c14)
+#define CNTVOFF		__ACCESS_CP15_64(4, c14)
+
+#define MIDR		__ACCESS_CP15(c0, 0, c0, 0)
+#define CSSELR		__ACCESS_CP15(c0, 2, c0, 0)
+#define VPIDR		__ACCESS_CP15(c0, 4, c0, 0)
+#define VMPIDR		__ACCESS_CP15(c0, 4, c0, 5)
+#define SCTLR		__ACCESS_CP15(c1, 0, c0, 0)
+#define CPACR		__ACCESS_CP15(c1, 0, c0, 2)
+#define HCR		__ACCESS_CP15(c1, 4, c1, 0)
+#define HDCR		__ACCESS_CP15(c1, 4, c1, 1)
+#define HCPTR		__ACCESS_CP15(c1, 4, c1, 2)
+#define HSTR		__ACCESS_CP15(c1, 4, c1, 3)
+#define TTBCR		__ACCESS_CP15(c2, 0, c0, 2)
+#define HTCR		__ACCESS_CP15(c2, 4, c0, 2)
+#define VTCR		__ACCESS_CP15(c2, 4, c1, 2)
+#define DACR		__ACCESS_CP15(c3, 0, c0, 0)
+#define DFSR		__ACCESS_CP15(c5, 0, c0, 0)
+#define IFSR		__ACCESS_CP15(c5, 0, c0, 1)
+#define ADFSR		__ACCESS_CP15(c5, 0, c1, 0)
+#define AIFSR		__ACCESS_CP15(c5, 0, c1, 1)
+#define HSR		__ACCESS_CP15(c5, 4, c2, 0)
+#define DFAR		__ACCESS_CP15(c6, 0, c0, 0)
+#define IFAR		__ACCESS_CP15(c6, 0, c0, 2)
+#define HDFAR		__ACCESS_CP15(c6, 4, c0, 0)
+#define HIFAR		__ACCESS_CP15(c6, 4, c0, 2)
+#define HPFAR		__ACCESS_CP15(c6, 4, c0, 4)
+#define ICIALLUIS	__ACCESS_CP15(c7, 0, c1, 0)
+#define ATS1CPR		__ACCESS_CP15(c7, 0, c8, 0)
+#define TLBIALLIS	__ACCESS_CP15(c8, 0, c3, 0)
+#define TLBIALLNSNHIS	__ACCESS_CP15(c8, 4, c3, 4)
+#define PRRR		__ACCESS_CP15(c10, 0, c2, 0)
+#define NMRR		__ACCESS_CP15(c10, 0, c2, 1)
+#define AMAIR0		__ACCESS_CP15(c10, 0, c3, 0)
+#define AMAIR1		__ACCESS_CP15(c10, 0, c3, 1)
+#define VBAR		__ACCESS_CP15(c12, 0, c0, 0)
+#define CID		__ACCESS_CP15(c13, 0, c0, 1)
+#define TID_URW		__ACCESS_CP15(c13, 0, c0, 2)
+#define TID_URO		__ACCESS_CP15(c13, 0, c0, 3)
+#define TID_PRIV	__ACCESS_CP15(c13, 0, c0, 4)
+#define HTPIDR		__ACCESS_CP15(c13, 4, c0, 2)
+#define CNTKCTL		__ACCESS_CP15(c14, 0, c1, 0)
+#define CNTV_CTL	__ACCESS_CP15(c14, 0, c3, 1)
+#define CNTHCTL		__ACCESS_CP15(c14, 4, c1, 0)
+
+#define VFP_FPEXC	__ACCESS_VFP(FPEXC)
+
+/* AArch64 compatibility macros, only for the timer so far */
+#define read_sysreg_el0(r)		read_sysreg(r##_el0)
+#define write_sysreg_el0(v, r)		write_sysreg(v, r##_el0)
+
+#define cntv_ctl_el0			CNTV_CTL
+#define cntv_cval_el0			CNTV_CVAL
+#define cntvoff_el2			CNTVOFF
+#define cnthctl_el2			CNTHCTL
+
+void __timer_save_state(struct kvm_vcpu *vcpu);
+void __timer_restore_state(struct kvm_vcpu *vcpu);
+
+void __vgic_v2_save_state(struct kvm_vcpu *vcpu);
+void __vgic_v2_restore_state(struct kvm_vcpu *vcpu);
+
+void __sysreg_save_state(struct kvm_cpu_context *ctxt);
+void __sysreg_restore_state(struct kvm_cpu_context *ctxt);
+
+void asmlinkage __vfp_save_state(struct vfp_hard_struct *vfp);
+void asmlinkage __vfp_restore_state(struct vfp_hard_struct *vfp);
+static inline bool __vfp_enabled(void)
+{
+	return !(read_sysreg(HCPTR) & (HCPTR_TCP(11) | HCPTR_TCP(10)));
+}
+
+void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt);
+void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt);
+
+int asmlinkage __guest_enter(struct kvm_vcpu *vcpu,
+			     struct kvm_cpu_context *host);
+int asmlinkage __hyp_do_panic(const char *, int, u32);
+
+#endif /* __ARM_KVM_HYP_H__ */
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index 405aa1883307..da44be9db4fa 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -179,10 +179,11 @@ struct kvm;
 
 static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
 {
-	return (vcpu->arch.cp15[c1_SCTLR] & 0b101) == 0b101;
+	return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101;
 }
 
-static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
+static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu,
+					       kvm_pfn_t pfn,
 					       unsigned long size,
 					       bool ipa_uncached)
 {
@@ -246,7 +247,7 @@ static inline void __kvm_flush_dcache_pte(pte_t pte)
 static inline void __kvm_flush_dcache_pmd(pmd_t pmd)
 {
 	unsigned long size = PMD_SIZE;
-	pfn_t pfn = pmd_pfn(pmd);
+	kvm_pfn_t pfn = pmd_pfn(pmd);
 
 	while (size) {
 		void *va = kmap_atomic_pfn(pfn);
@@ -279,6 +280,11 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd,
 				       pgd_t *merged_hyp_pgd,
 				       unsigned long hyp_idmap_start) { }
 
+static inline unsigned int kvm_get_vmid_bits(void)
+{
+	return 8;
+}
+
 #endif	/* !__ASSEMBLY__ */
 
 #endif /* __ARM_KVM_MMU_H__ */
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index f98c7f32c9c8..9b7c328fb207 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -42,6 +42,8 @@ enum {
 extern void iotable_init(struct map_desc *, int);
 extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
 				  void *caller);
+extern void create_mapping_late(struct mm_struct *mm, struct map_desc *md,
+				bool ng);
 
 #ifdef CONFIG_DEBUG_LL
 extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index c79b57bf71c4..9427fd632552 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -134,6 +134,21 @@
  */
 #define PLAT_PHYS_OFFSET	UL(CONFIG_PHYS_OFFSET)
 
+#ifdef CONFIG_XIP_KERNEL
+/*
+ * When referencing data in RAM from the XIP region in a relative manner
+ * with the MMU off, we need the relative offset between the two physical
+ * addresses.  The macro below achieves this, which is:
+ *    __pa(v_data) - __xip_pa(v_text)
+ */
+#define PHYS_RELATIVE(v_data, v_text) \
+	(((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \
+	 ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \
+          CONFIG_XIP_PHYS_ADDR))
+#else
+#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text))
+#endif
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -273,14 +288,14 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __va(x)			((void *)__phys_to_virt((phys_addr_t)(x)))
 #define pfn_to_kaddr(pfn)	__va((phys_addr_t)(pfn) << PAGE_SHIFT)
 
-extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
+extern unsigned long (*arch_virt_to_idmap)(unsigned long x);
 
 /*
  * These are for systems that have a hardware interconnect supported alias of
  * physical memory for idmap purposes.  Most cases should leave these
- * untouched.
+ * untouched.  Note: this can only return addresses less than 4GiB.
  */
-static inline phys_addr_t __virt_to_idmap(unsigned long x)
+static inline unsigned long __virt_to_idmap(unsigned long x)
 {
 	if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
 		return arch_virt_to_idmap(x);
@@ -303,20 +318,6 @@ static inline phys_addr_t __virt_to_idmap(unsigned long x)
 #define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
-#ifdef CONFIG_VIRT_TO_BUS
-#define virt_to_bus virt_to_bus
-static inline __deprecated unsigned long virt_to_bus(void *x)
-{
-	return __virt_to_bus((unsigned long)x);
-}
-
-#define bus_to_virt bus_to_virt
-static inline __deprecated void *bus_to_virt(unsigned long x)
-{
-	return (void *)__bus_to_virt(x);
-}
-#endif
-
 /*
  * Conversion between a struct page and a physical address.
  *
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 9b32f76bb0dd..fa5b42d44985 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -26,7 +26,12 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 #ifdef CONFIG_CPU_HAS_ASID
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
-#define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	atomic64_set(&mm->context.id, 0);
+	return 0;
+}
 
 #ifdef CONFIG_ARM_ERRATA_798181
 void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
@@ -85,7 +90,12 @@ static inline void finish_arch_post_lock_switch(void)
 
 #endif	/* CONFIG_MMU */
 
-#define init_new_context(tsk,mm)	0
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+	return 0;
+}
+
 
 #endif	/* CONFIG_CPU_HAS_ASID */
 
diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index d1b162a18dcb..503f488053de 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -17,9 +17,6 @@
 #define KTHREAD_SIZE PAGE_SIZE
 #endif
  
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
 #define clear_page(page)	memset((page), 0, PAGE_SIZE)
 #define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
 
diff --git a/arch/arm/include/asm/paravirt.h b/arch/arm/include/asm/paravirt.h
new file mode 100644
index 000000000000..8435ff591386
--- /dev/null
+++ b/arch/arm/include/asm/paravirt.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_ARM_PARAVIRT_H
+#define _ASM_ARM_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT
+struct static_key;
+extern struct static_key paravirt_steal_enabled;
+extern struct static_key paravirt_steal_rq_enabled;
+
+struct pv_time_ops {
+	unsigned long long (*steal_clock)(int cpu);
+};
+extern struct pv_time_ops pv_time_ops;
+
+static inline u64 paravirt_steal_clock(int cpu)
+{
+	return pv_time_ops.steal_clock(cpu);
+}
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index a5635444ca41..057d381f4e57 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -2,9 +2,6 @@
 #define ASMARM_PCI_H
 
 #ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-#include <asm-generic/pci-bridge.h>
-
 #include <asm/mach/pci.h> /* for pci_sys_data */
 
 extern unsigned long pcibios_min_io;
@@ -41,5 +38,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 
 #endif /* __KERNEL__ */
- 
 #endif
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index a745a2a53853..dc46398bc3a5 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -88,7 +88,6 @@
 
 #define L_PMD_SECT_VALID	(_AT(pmdval_t, 1) << 0)
 #define L_PMD_SECT_DIRTY	(_AT(pmdval_t, 1) << 55)
-#define L_PMD_SECT_SPLITTING	(_AT(pmdval_t, 1) << 56)
 #define L_PMD_SECT_NONE		(_AT(pmdval_t, 1) << 57)
 #define L_PMD_SECT_RDONLY	(_AT(pteval_t, 1) << 58)
 
@@ -232,13 +231,6 @@ static inline pte_t pte_mkspecial(pte_t pte)
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !pmd_table(pmd))
-#define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING))
-
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
-			  pmd_t *pmdp);
-#endif
 #endif
 
 #define PMD_BIT_FUNC(fn,op) \
@@ -246,9 +238,9 @@ static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; }
 
 PMD_BIT_FUNC(wrprotect,	|= L_PMD_SECT_RDONLY);
 PMD_BIT_FUNC(mkold,	&= ~PMD_SECT_AF);
-PMD_BIT_FUNC(mksplitting, |= L_PMD_SECT_SPLITTING);
 PMD_BIT_FUNC(mkwrite,   &= ~L_PMD_SECT_RDONLY);
 PMD_BIT_FUNC(mkdirty,   |= L_PMD_SECT_DIRTY);
+PMD_BIT_FUNC(mkclean,   &= ~L_PMD_SECT_DIRTY);
 PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 
 #define pmd_mkhuge(pmd)		(__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT))
diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h
index 68ee3ce17b82..e1b825dfab23 100644
--- a/arch/arm/include/asm/psci.h
+++ b/arch/arm/include/asm/psci.h
@@ -14,9 +14,9 @@
 #ifndef __ASM_ARM_PSCI_H
 #define __ASM_ARM_PSCI_H
 
-extern struct smp_operations psci_smp_ops;
+extern const struct smp_operations psci_smp_ops;
 
-#ifdef CONFIG_ARM_PSCI
+#if defined(CONFIG_SMP) && defined(CONFIG_ARM_PSCI)
 bool psci_smp_available(void);
 #else
 static inline bool psci_smp_available(void) { return false; }
diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h
new file mode 100644
index 000000000000..803bbf2b20b8
--- /dev/null
+++ b/arch/arm/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef _ASM_ARM_SECTIONS_H
+#define _ASM_ARM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char _exiprom[];
+
+#endif	/* _ASM_ARM_SECTIONS_H */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index e0adb9f1bf94..3613d7e9fc40 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -25,4 +25,10 @@ extern int arm_add_memory(u64 start, u64 size);
 extern void early_print(const char *str, ...);
 extern void dump_machine_table(void);
 
+#ifdef CONFIG_ATAGS_PROC
+extern void save_atags(const struct tag *tags);
+#else
+static inline void save_atags(const struct tag *tags) { }
+#endif
+
 #endif
diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
index 00098615c6f0..73e5e8513751 100644
--- a/arch/arm/include/asm/sparsemem.h
+++ b/arch/arm/include/asm/sparsemem.h
@@ -15,10 +15,11 @@
  * Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
  * then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
  *
- * Define these in your mach/memory.h.
+ * These can be overridden in your mach/memory.h.
  */
-#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
-#error Sparsemem is not supported on this platform
+#if !defined(MAX_PHYSMEM_BITS) || !defined(SECTION_SIZE_BITS)
+#define MAX_PHYSMEM_BITS	36
+#define SECTION_SIZE_BITS	28
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 8cc85a4ebec2..35c9db857ebe 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -510,10 +510,14 @@ __copy_to_user_std(void __user *to, const void *from, unsigned long n);
 static inline unsigned long __must_check
 __copy_to_user(void __user *to, const void *from, unsigned long n)
 {
+#ifndef CONFIG_UACCESS_WITH_MEMCPY
 	unsigned int __ua_flags = uaccess_save_and_enable();
 	n = arm_copy_to_user(to, from, n);
 	uaccess_restore(__ua_flags);
 	return n;
+#else
+	return arm_copy_to_user(to, from, n);
+#endif
 }
 
 extern unsigned long __must_check
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 7b84657fba35..194b69923389 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -19,7 +19,7 @@
  * This may need to be greater than __NR_last_syscall+1 in order to
  * account for the padding in the syscall table
  */
-#define __NR_syscalls  (392)
+#define __NR_syscalls  (396)
 
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h
index 4371f45c5784..d4ceaf5f299b 100644
--- a/arch/arm/include/asm/virt.h
+++ b/arch/arm/include/asm/virt.h
@@ -74,6 +74,15 @@ static inline bool is_hyp_mode_mismatched(void)
 {
 	return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH);
 }
+
+static inline bool is_kernel_in_hyp_mode(void)
+{
+	return false;
+}
+
+/* The section containing the hypervisor text */
+extern char __hyp_text_start[];
+extern char __hyp_text_end[];
 #endif
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h
index 712b50e0a6dc..b6b962d70db9 100644
--- a/arch/arm/include/asm/xen/hypercall.h
+++ b/arch/arm/include/asm/xen/hypercall.h
@@ -33,8 +33,11 @@
 #ifndef _ASM_ARM_XEN_HYPERCALL_H
 #define _ASM_ARM_XEN_HYPERCALL_H
 
+#include <linux/bug.h>
+
 #include <xen/interface/xen.h>
 #include <xen/interface/sched.h>
+#include <xen/interface/platform.h>
 
 long privcmd_call(unsigned call, unsigned long a1,
 		unsigned long a2, unsigned long a3,
@@ -49,6 +52,12 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg);
 int HYPERVISOR_physdev_op(int cmd, void *arg);
 int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args);
 int HYPERVISOR_tmem_op(void *arg);
+int HYPERVISOR_platform_op_raw(void *arg);
+static inline int HYPERVISOR_platform_op(struct xen_platform_op *op)
+{
+	op->interface_version = XENPF_INTERFACE_VERSION;
+	return HYPERVISOR_platform_op_raw(op);
+}
 int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr);
 
 static inline int
diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h
index 50066006e6bd..75d596862892 100644
--- a/arch/arm/include/asm/xen/interface.h
+++ b/arch/arm/include/asm/xen/interface.h
@@ -27,6 +27,8 @@
 		(hnd).p = val;				\
 	} while (0)
 
+#define __HYPERVISOR_platform_op_raw __HYPERVISOR_platform_op
+
 #ifndef __ASSEMBLY__
 /* Explicitly size integers that represent pfns in the interface with
  * Xen so that we can have one ABI that works for 32 and 64 bit guests.
@@ -76,6 +78,7 @@ struct pvclock_wall_clock {
 	u32   version;
 	u32   sec;
 	u32   nsec;
+	u32   sec_hi;
 } __attribute__((__packed__));
 #endif
 
diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h
index 0375c8caa061..9408a994cc91 100644
--- a/arch/arm/include/asm/xen/page-coherent.h
+++ b/arch/arm/include/asm/xen/page-coherent.h
@@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
 	     dma_addr_t dev_addr, unsigned long offset, size_t size,
 	     enum dma_data_direction dir, struct dma_attrs *attrs)
 {
-	bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page);
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
 	/*
-	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
-	 * multiple Xen page, it's not possible to have a mix of local and
-	 * foreign Xen page. So if the first xen_pfn == mfn the page is local
-	 * otherwise it's a foreign page grant-mapped in dom0. If the page is
-	 * local we can safely call the native dma_ops function, otherwise we
-	 * call the xen specific function.
+	 * Dom0 is mapped 1:1, while the Linux page can span across
+	 * multiple Xen pages, it's not possible for it to contain a
+	 * mix of local and foreign Xen pages. So if the first xen_pfn
+	 * == mfn the page is local otherwise it's a foreign page
+	 * grant-mapped in dom0. If the page is local we can safely
+	 * call the native dma_ops function, otherwise we call the xen
+	 * specific function.
 	 */
 	if (local)
 		__generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index 2556a8801c8c..d4ae3b8e2426 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -9,32 +9,22 @@
  *
 */
 
-#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
-#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
-#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU2)
-/* On sama5d4, use USART3 as low level serial console */
-#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
-#else
-/* On sama5d2, use UART1 as low level serial console */
-#define AT91_DBGU 0xf8020000
-#endif
-
 #ifdef CONFIG_MMU
 #define AT91_IO_P2V(x) ((x) - 0x01000000)
 #else
 #define AT91_IO_P2V(x) (x)
 #endif
 
+#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
+
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
 #define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
 #define AT91_DBGU_TXEMPTY	(1 << 9)	/* Transmitter Empty */
 
 	.macro	addruart, rp, rv, tmp
-	ldr	\rp, =AT91_DBGU				@ System peripherals (phys address)
-	ldr	\rv, =AT91_IO_P2V(AT91_DBGU)		@ System peripherals (virt address)
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
+	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/include/debug/dc21285.S
index 02247f313e94..02247f313e94 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/include/debug/dc21285.S
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 619d8cc1ac12..92c44760d656 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -11,6 +11,7 @@
  *
  */
 
+#include <asm/assembler.h>
 #include "imx-uart.h"
 
 /*
@@ -34,6 +35,7 @@
 		.endm
 
 		.macro	senduart,rd,rx
+		ARM_BE8(rev \rd, \rd)
 		str	\rd, [\rx, #0x40]	@ TXDATA
 		.endm
 
@@ -42,6 +44,7 @@
 
 		.macro	busyuart,rd,rx
 1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		ARM_BE8(rev \rd, \rd)
 		tst	\rd, #1 << 3		@ TXDC
 		beq	1002b			@ wait until transmit done
 		.endm
diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S
new file mode 100644
index 000000000000..6824b2d1c38e
--- /dev/null
+++ b/arch/arm/include/debug/palmchip.S
@@ -0,0 +1,11 @@
+#include <linux/serial_reg.h>
+
+#undef UART_TX
+#undef UART_LSR
+#undef UART_MSR
+
+#define UART_TX 1
+#define UART_LSR 7
+#define UART_MSR 8
+
+#include <debug/8250.S>
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
index de86b9247564..060cb5b49bfd 100644
--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@@ -20,9 +20,9 @@
 #define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
 
 #define UART0_PHYS		0xE0000000
-#define UART0_VIRT		0xF0000000
+#define UART0_VIRT		0xF0800000
 #define UART1_PHYS		0xE0001000
-#define UART1_VIRT		0xF0001000
+#define UART1_VIRT		0xF0801000
 
 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
 # define LL_UART_PADDR		UART1_PHYS
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index 7a2a32a1d5a8..2cb9dc770e1d 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -416,6 +416,10 @@
 #define __NR_execveat			(__NR_SYSCALL_BASE+387)
 #define __NR_userfaultfd		(__NR_SYSCALL_BASE+388)
 #define __NR_membarrier			(__NR_SYSCALL_BASE+389)
+#define __NR_mlock2			(__NR_SYSCALL_BASE+390)
+#define __NR_copy_file_range		(__NR_SYSCALL_BASE+391)
+#define __NR_preadv2			(__NR_SYSCALL_BASE+392)
+#define __NR_pwritev2			(__NR_SYSCALL_BASE+393)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index af9e59bf3831..ad325a8c7e1e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -73,23 +73,26 @@ obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_regs.o perf_callchain.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_xscale.o perf_event_v6.o \
 				   perf_event_v7.o
-CFLAGS_pj4-cp0.o		:= -marm
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 obj-$(CONFIG_ARM_CPU_TOPOLOGY)  += topology.o
 obj-$(CONFIG_VDSO)		+= vdso.o
+obj-$(CONFIG_EFI)		+= efi.o
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)
   obj-y		+= io.o
 endif
+obj-$(CONFIG_PARAVIRT)	+= paravirt.o
 
 head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
+AFLAGS_hyp-stub.o		:=-Wa,-march=armv7-a
 ifeq ($(CONFIG_ARM_PSCI),y)
-obj-y				+= psci-call.o
 obj-$(CONFIG_SMP)		+= psci_smp.o
 endif
 
+obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
+
 extra-y := $(head-y) vmlinux.lds
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index f89811fb9a55..7e45f69a0ddc 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -16,6 +16,7 @@
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/arm-smccc.h>
 
 #include <asm/checksum.h>
 #include <asm/ftrace.h>
@@ -175,3 +176,8 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
 EXPORT_SYMBOL(__pv_phys_pfn_offset);
 EXPORT_SYMBOL(__pv_offset);
 #endif
+
+#ifdef CONFIG_HAVE_ARM_SMCCC
+EXPORT_SYMBOL(arm_smccc_smc);
+EXPORT_SYMBOL(arm_smccc_hvc);
+#endif
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 871b8267d211..27d05813ff09 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -170,41 +170,11 @@ int main(void)
   DEFINE(CACHE_WRITEBACK_GRANULE, __CACHE_WRITEBACK_GRANULE);
   BLANK();
 #ifdef CONFIG_KVM_ARM_HOST
-  DEFINE(VCPU_KVM,		offsetof(struct kvm_vcpu, kvm));
-  DEFINE(VCPU_MIDR,		offsetof(struct kvm_vcpu, arch.midr));
-  DEFINE(VCPU_CP15,		offsetof(struct kvm_vcpu, arch.cp15));
-  DEFINE(VCPU_VFP_GUEST,	offsetof(struct kvm_vcpu, arch.vfp_guest));
-  DEFINE(VCPU_VFP_HOST,		offsetof(struct kvm_vcpu, arch.host_cpu_context));
-  DEFINE(VCPU_REGS,		offsetof(struct kvm_vcpu, arch.regs));
-  DEFINE(VCPU_USR_REGS,		offsetof(struct kvm_vcpu, arch.regs.usr_regs));
-  DEFINE(VCPU_SVC_REGS,		offsetof(struct kvm_vcpu, arch.regs.svc_regs));
-  DEFINE(VCPU_ABT_REGS,		offsetof(struct kvm_vcpu, arch.regs.abt_regs));
-  DEFINE(VCPU_UND_REGS,		offsetof(struct kvm_vcpu, arch.regs.und_regs));
-  DEFINE(VCPU_IRQ_REGS,		offsetof(struct kvm_vcpu, arch.regs.irq_regs));
-  DEFINE(VCPU_FIQ_REGS,		offsetof(struct kvm_vcpu, arch.regs.fiq_regs));
-  DEFINE(VCPU_PC,		offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_pc));
-  DEFINE(VCPU_CPSR,		offsetof(struct kvm_vcpu, arch.regs.usr_regs.ARM_cpsr));
-  DEFINE(VCPU_HCR,		offsetof(struct kvm_vcpu, arch.hcr));
-  DEFINE(VCPU_IRQ_LINES,	offsetof(struct kvm_vcpu, arch.irq_lines));
-  DEFINE(VCPU_HSR,		offsetof(struct kvm_vcpu, arch.fault.hsr));
-  DEFINE(VCPU_HxFAR,		offsetof(struct kvm_vcpu, arch.fault.hxfar));
-  DEFINE(VCPU_HPFAR,		offsetof(struct kvm_vcpu, arch.fault.hpfar));
-  DEFINE(VCPU_HYP_PC,		offsetof(struct kvm_vcpu, arch.fault.hyp_pc));
-  DEFINE(VCPU_VGIC_CPU,		offsetof(struct kvm_vcpu, arch.vgic_cpu));
-  DEFINE(VGIC_V2_CPU_HCR,	offsetof(struct vgic_cpu, vgic_v2.vgic_hcr));
-  DEFINE(VGIC_V2_CPU_VMCR,	offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr));
-  DEFINE(VGIC_V2_CPU_MISR,	offsetof(struct vgic_cpu, vgic_v2.vgic_misr));
-  DEFINE(VGIC_V2_CPU_EISR,	offsetof(struct vgic_cpu, vgic_v2.vgic_eisr));
-  DEFINE(VGIC_V2_CPU_ELRSR,	offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr));
-  DEFINE(VGIC_V2_CPU_APR,	offsetof(struct vgic_cpu, vgic_v2.vgic_apr));
-  DEFINE(VGIC_V2_CPU_LR,	offsetof(struct vgic_cpu, vgic_v2.vgic_lr));
-  DEFINE(VGIC_CPU_NR_LR,	offsetof(struct vgic_cpu, nr_lr));
-  DEFINE(VCPU_TIMER_CNTV_CTL,	offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl));
-  DEFINE(VCPU_TIMER_CNTV_CVAL,	offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval));
-  DEFINE(KVM_TIMER_CNTVOFF,	offsetof(struct kvm, arch.timer.cntvoff));
-  DEFINE(KVM_TIMER_ENABLED,	offsetof(struct kvm, arch.timer.enabled));
-  DEFINE(KVM_VGIC_VCTRL,	offsetof(struct kvm, arch.vgic.vctrl_base));
-  DEFINE(KVM_VTTBR,		offsetof(struct kvm, arch.vttbr));
+  DEFINE(VCPU_GUEST_CTXT,	offsetof(struct kvm_vcpu, arch.ctxt));
+  DEFINE(VCPU_HOST_CTXT,	offsetof(struct kvm_vcpu, arch.host_cpu_context));
+  DEFINE(CPU_CTXT_VFP,		offsetof(struct kvm_cpu_context, vfp));
+  DEFINE(CPU_CTXT_GP_REGS,	offsetof(struct kvm_cpu_context, gp_regs));
+  DEFINE(GP_REGS_USR,		offsetof(struct kvm_regs, usr_regs));
 #endif
   BLANK();
 #ifdef CONFIG_VDSO
diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h
index ec4164da6e30..edfa2268c127 100644
--- a/arch/arm/kernel/atags.h
+++ b/arch/arm/kernel/atags.h
@@ -1,9 +1,3 @@
-#ifdef CONFIG_ATAGS_PROC
-extern void save_atags(struct tag *tags);
-#else
-static inline void save_atags(struct tag *tags) { }
-#endif
-
 void convert_to_tag_list(struct tag *tags);
 
 #ifdef CONFIG_ATAGS
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 6551d28c27e6..066f7f9ba411 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -17,11 +17,6 @@
 #include <asm/mach/pci.h>
 
 static int debug_pci;
-static resource_size_t (*align_resource)(struct pci_dev *dev,
-		  const struct resource *res,
-		  resource_size_t start,
-		  resource_size_t size,
-		  resource_size_t align) = NULL;
 
 /*
  * We can't use pci_get_device() here since we are
@@ -461,7 +456,6 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;
 		sys->map_irq = hw->map_irq;
-		align_resource = hw->align_resource;
 		INIT_LIST_HEAD(&sys->resources);
 
 		if (hw->private_data)
@@ -470,6 +464,8 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 		ret = hw->setup(nr, sys);
 
 		if (ret > 0) {
+			struct pci_host_bridge *host_bridge;
+
 			ret = pcibios_init_resources(nr, sys);
 			if (ret)  {
 				kfree(sys);
@@ -491,6 +487,9 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw,
 			busnr = sys->bus->busn_res.end + 1;
 
 			list_add(&sys->node, head);
+
+			host_bridge = pci_find_host_bridge(sys->bus);
+			host_bridge->align_resource = hw->align_resource;
 		} else {
 			kfree(sys);
 			if (ret < 0)
@@ -578,14 +577,18 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 {
 	struct pci_dev *dev = data;
 	resource_size_t start = res->start;
+	struct pci_host_bridge *host_bridge;
 
 	if (res->flags & IORESOURCE_IO && start & 0x300)
 		start = (start + 0x3ff) & ~0x3ff;
 
 	start = (start + align - 1) & ~(align - 1);
 
-	if (align_resource)
-		return align_resource(dev, res, start, size, align);
+	host_bridge = pci_find_host_bridge(dev->bus);
+
+	if (host_bridge->align_resource)
+		return host_bridge->align_resource(dev, res,
+				start, size, align);
 
 	return start;
 }
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index fde6c88d560c..703fa0f3cd8f 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -399,6 +399,10 @@
 		CALL(sys_execveat)
 		CALL(sys_userfaultfd)
 		CALL(sys_membarrier)
+/* 390 */	CALL(sys_mlock2)
+		CALL(sys_copy_file_range)
+		CALL(sys_preadv2)
+		CALL(sys_pwritev2)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c
index 318da33465f4..703926e7007b 100644
--- a/arch/arm/kernel/cpuidle.c
+++ b/arch/arm/kernel/cpuidle.c
@@ -56,7 +56,7 @@ int arm_cpuidle_suspend(int index)
 	int cpu = smp_processor_id();
 
 	if (cpuidle_ops[cpu].suspend)
-		ret = cpuidle_ops[cpu].suspend(cpu, index);
+		ret = cpuidle_ops[cpu].suspend(index);
 
 	return ret;
 }
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index 65addcbf5b30..2e26016a91a5 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -211,7 +211,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
 
-#ifdef CONFIG_ARCH_MULTIPLATFORM
+#if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M)
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
 	MACHINE_END
 
diff --git a/arch/arm/kernel/efi.c b/arch/arm/kernel/efi.c
new file mode 100644
index 000000000000..ff8a9d8acfac
--- /dev/null
+++ b/arch/arm/kernel/efi.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/efi.h>
+#include <asm/efi.h>
+#include <asm/mach/map.h>
+#include <asm/mmu_context.h>
+
+int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
+{
+	struct map_desc desc = {
+		.virtual	= md->virt_addr,
+		.pfn		= __phys_to_pfn(md->phys_addr),
+		.length		= md->num_pages * EFI_PAGE_SIZE,
+	};
+
+	/*
+	 * Order is important here: memory regions may have all of the
+	 * bits below set (and usually do), so we check them in order of
+	 * preference.
+	 */
+	if (md->attribute & EFI_MEMORY_WB)
+		desc.type = MT_MEMORY_RWX;
+	else if (md->attribute & EFI_MEMORY_WT)
+		desc.type = MT_MEMORY_RWX_NONCACHED;
+	else if (md->attribute & EFI_MEMORY_WC)
+		desc.type = MT_DEVICE_WC;
+	else
+		desc.type = MT_DEVICE;
+
+	create_mapping_late(mm, &desc, true);
+	return 0;
+}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3ce377f7251f..e2550500486d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1064,7 +1064,6 @@ ENDPROC(vector_\name)
 	.endm
 
 	.section .stubs, "ax", %progbits
-__stubs_start:
 	@ This must be the first word
 	.word	vector_swi
 
@@ -1202,14 +1201,13 @@ vector_addrexcptn:
 	.long	__fiq_svc			@  e
 	.long	__fiq_svc			@  f
 
-	.globl	vector_fiq_offset
-	.equ	vector_fiq_offset, vector_fiq
+	.globl	vector_fiq
 
 	.section .vectors, "ax", %progbits
-__vectors_start:
+.L__vectors_start:
 	W(b)	vector_rst
 	W(b)	vector_und
-	W(ldr)	pc, __vectors_start + 0x1000
+	W(ldr)	pc, .L__vectors_start + 0x1000
 	W(b)	vector_pabt
 	W(b)	vector_dabt
 	W(b)	vector_addrexcptn
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index b6c8bb9315e7..907534f97053 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -88,7 +88,7 @@ __pendsv_entry:
 	@ execute the pending work, including reschedule
 	get_thread_info tsk
 	mov	why, #0
-	b	ret_to_user
+	b	ret_to_user_from_irq
 ENDPROC(__pendsv_entry)
 
 /*
diff --git a/arch/arm/kernel/hibernate.c b/arch/arm/kernel/hibernate.c
index a71501ff6f18..b09561a6d06a 100644
--- a/arch/arm/kernel/hibernate.c
+++ b/arch/arm/kernel/hibernate.c
@@ -62,7 +62,7 @@ static int notrace arch_save_image(unsigned long unused)
 
 	ret = swsusp_save();
 	if (ret == 0)
-		_soft_restart(virt_to_phys(cpu_resume), false);
+		_soft_restart(virt_to_idmap(cpu_resume), false);
 	return ret;
 }
 
@@ -87,7 +87,7 @@ static void notrace arch_restore_image(void *unused)
 	for (pbe = restore_pblist; pbe; pbe = pbe->next)
 		copy_page(pbe->orig_address, pbe->address);
 
-	_soft_restart(virt_to_phys(cpu_resume), false);
+	_soft_restart(virt_to_idmap(cpu_resume), false);
 }
 
 static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata;
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 2a55373f49bf..0b1e4a93d67e 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -17,6 +17,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/irqchip/arm-gic-v3.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/virt.h>
@@ -161,6 +162,29 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 1:
 #endif
 
+#ifdef CONFIG_ARM_GIC_V3
+	@ Check whether GICv3 system registers are available
+	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
+	ubfx	r7, r7, #28, #4
+	cmp	r7, #1
+	bne	2f
+
+	@ Enable system register accesses
+	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
+	orr	r7, r7, #(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE)
+	mcr	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
+	isb
+
+	@ SRE bit could be forced to 0 by firmware.
+	@ Check whether it sticks before accessing any other sysreg
+	mrc	p15, 4, r7, c12, c9, 5	@ ICC_HSRE
+	tst	r7, #ICC_SRE_EL2_SRE
+	beq	2f
+	mov	r7, #0
+	mcr	p15, 4, r7, c12, c11, 0	@ ICH_HCR
+2:
+#endif
+
 	bx	lr			@ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 2766183e69df..ece04a457486 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -39,6 +39,7 @@
 #include <linux/export.h>
 
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/cache-uniphier.h>
 #include <asm/outercache.h>
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
@@ -94,9 +95,11 @@ void __init init_IRQ(void)
 			outer_cache.write_sec = machine_desc->l2c_write_sec;
 		ret = l2x0_of_init(machine_desc->l2c_aux_val,
 				   machine_desc->l2c_aux_mask);
-		if (ret)
+		if (ret && ret != -ENODEV)
 			pr_err("L2C: failed to init: %d\n", ret);
 	}
+
+	uniphier_cache_init();
 }
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 8bf3b7c09888..59fd0e24c56b 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -143,10 +143,8 @@ void (*kexec_reinit)(void);
 
 void machine_kexec(struct kimage *image)
 {
-	unsigned long page_list;
-	unsigned long reboot_code_buffer_phys;
-	unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
-	unsigned long reboot_entry_phys;
+	unsigned long page_list, reboot_entry_phys;
+	void (*reboot_entry)(void);
 	void *reboot_code_buffer;
 
 	/*
@@ -159,9 +157,6 @@ void machine_kexec(struct kimage *image)
 
 	page_list = image->head & PAGE_MASK;
 
-	/* we need both effective and real address here */
-	reboot_code_buffer_phys =
-	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
 	/* Prepare parameters for reboot_code_buffer*/
@@ -174,10 +169,11 @@ void machine_kexec(struct kimage *image)
 
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,
-			     reboot_entry,
+			     &relocate_new_kernel,
 			     relocate_new_kernel_size);
-	reboot_entry_phys = (unsigned long)reboot_entry +
-		(reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
+
+	/* get the identity mapping physical address for the reboot code */
+	reboot_entry_phys = virt_to_idmap(reboot_entry);
 
 	pr_info("Bye!\n");
 
diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c
index 097e2e201b9f..0c7efc3446c0 100644
--- a/arch/arm/kernel/module-plts.c
+++ b/arch/arm/kernel/module-plts.c
@@ -32,7 +32,7 @@ struct plt_entries {
 
 static bool in_init(const struct module *mod, u32 addr)
 {
-	return addr - (u32)mod->module_init < mod->init_size;
+	return addr - (u32)mod->init_layout.base < mod->init_layout.size;
 }
 
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index efdddcb97dd1..4f14b5ce6535 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -34,7 +34,7 @@
  * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
  */
 #undef MODULES_VADDR
-#define MODULES_VADDR	(((unsigned long)_etext + ~PMD_MASK) & PMD_MASK)
+#define MODULES_VADDR	(((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK)
 #endif
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm64/kernel/psci-call.S b/arch/arm/kernel/paravirt.c
index cf83e61cd3b5..53f371ed4568 100644
--- a/arch/arm64/kernel/psci-call.S
+++ b/arch/arm/kernel/paravirt.c
@@ -8,21 +8,18 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * Copyright (C) 2015 ARM Limited
+ * Copyright (C) 2013 Citrix Systems
  *
- * Author: Will Deacon <will.deacon@arm.com>
+ * Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
  */
 
-#include <linux/linkage.h>
+#include <linux/export.h>
+#include <linux/jump_label.h>
+#include <linux/types.h>
+#include <asm/paravirt.h>
 
-/* int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
-ENTRY(__invoke_psci_fn_hvc)
-	hvc	#0
-	ret
-ENDPROC(__invoke_psci_fn_hvc)
+struct static_key paravirt_steal_enabled;
+struct static_key paravirt_steal_rq_enabled;
 
-/* int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
-ENTRY(__invoke_psci_fn_smc)
-	smc	#0
-	ret
-ENDPROC(__invoke_psci_fn_smc)
+struct pv_time_ops pv_time_ops;
+EXPORT_SYMBOL_GPL(pv_time_ops);
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 126dc679b230..15063851cd10 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -35,133 +35,117 @@
  * but the encodings are considered to be `reserved' in the case that
  * they are not available.
  */
-enum armv7_perf_types {
-	ARMV7_PERFCTR_PMNC_SW_INCR			= 0x00,
-	ARMV7_PERFCTR_L1_ICACHE_REFILL			= 0x01,
-	ARMV7_PERFCTR_ITLB_REFILL			= 0x02,
-	ARMV7_PERFCTR_L1_DCACHE_REFILL			= 0x03,
-	ARMV7_PERFCTR_L1_DCACHE_ACCESS			= 0x04,
-	ARMV7_PERFCTR_DTLB_REFILL			= 0x05,
-	ARMV7_PERFCTR_MEM_READ				= 0x06,
-	ARMV7_PERFCTR_MEM_WRITE				= 0x07,
-	ARMV7_PERFCTR_INSTR_EXECUTED			= 0x08,
-	ARMV7_PERFCTR_EXC_TAKEN				= 0x09,
-	ARMV7_PERFCTR_EXC_EXECUTED			= 0x0A,
-	ARMV7_PERFCTR_CID_WRITE				= 0x0B,
+#define ARMV7_PERFCTR_PMNC_SW_INCR			0x00
+#define ARMV7_PERFCTR_L1_ICACHE_REFILL			0x01
+#define ARMV7_PERFCTR_ITLB_REFILL			0x02
+#define ARMV7_PERFCTR_L1_DCACHE_REFILL			0x03
+#define ARMV7_PERFCTR_L1_DCACHE_ACCESS			0x04
+#define ARMV7_PERFCTR_DTLB_REFILL			0x05
+#define ARMV7_PERFCTR_MEM_READ				0x06
+#define ARMV7_PERFCTR_MEM_WRITE				0x07
+#define ARMV7_PERFCTR_INSTR_EXECUTED			0x08
+#define ARMV7_PERFCTR_EXC_TAKEN				0x09
+#define ARMV7_PERFCTR_EXC_EXECUTED			0x0A
+#define ARMV7_PERFCTR_CID_WRITE				0x0B
 
-	/*
-	 * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
-	 * It counts:
-	 *  - all (taken) branch instructions,
-	 *  - instructions that explicitly write the PC,
-	 *  - exception generating instructions.
-	 */
-	ARMV7_PERFCTR_PC_WRITE				= 0x0C,
-	ARMV7_PERFCTR_PC_IMM_BRANCH			= 0x0D,
-	ARMV7_PERFCTR_PC_PROC_RETURN			= 0x0E,
-	ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS		= 0x0F,
-	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED		= 0x10,
-	ARMV7_PERFCTR_CLOCK_CYCLES			= 0x11,
-	ARMV7_PERFCTR_PC_BRANCH_PRED			= 0x12,
-
-	/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
-	ARMV7_PERFCTR_MEM_ACCESS			= 0x13,
-	ARMV7_PERFCTR_L1_ICACHE_ACCESS			= 0x14,
-	ARMV7_PERFCTR_L1_DCACHE_WB			= 0x15,
-	ARMV7_PERFCTR_L2_CACHE_ACCESS			= 0x16,
-	ARMV7_PERFCTR_L2_CACHE_REFILL			= 0x17,
-	ARMV7_PERFCTR_L2_CACHE_WB			= 0x18,
-	ARMV7_PERFCTR_BUS_ACCESS			= 0x19,
-	ARMV7_PERFCTR_MEM_ERROR				= 0x1A,
-	ARMV7_PERFCTR_INSTR_SPEC			= 0x1B,
-	ARMV7_PERFCTR_TTBR_WRITE			= 0x1C,
-	ARMV7_PERFCTR_BUS_CYCLES			= 0x1D,
-
-	ARMV7_PERFCTR_CPU_CYCLES			= 0xFF
-};
+/*
+ * ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+ * It counts:
+ *  - all (taken) branch instructions,
+ *  - instructions that explicitly write the PC,
+ *  - exception generating instructions.
+ */
+#define ARMV7_PERFCTR_PC_WRITE				0x0C
+#define ARMV7_PERFCTR_PC_IMM_BRANCH			0x0D
+#define ARMV7_PERFCTR_PC_PROC_RETURN			0x0E
+#define ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS		0x0F
+#define ARMV7_PERFCTR_PC_BRANCH_MIS_PRED		0x10
+#define ARMV7_PERFCTR_CLOCK_CYCLES			0x11
+#define ARMV7_PERFCTR_PC_BRANCH_PRED			0x12
+
+/* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
+#define ARMV7_PERFCTR_MEM_ACCESS			0x13
+#define ARMV7_PERFCTR_L1_ICACHE_ACCESS			0x14
+#define ARMV7_PERFCTR_L1_DCACHE_WB			0x15
+#define ARMV7_PERFCTR_L2_CACHE_ACCESS			0x16
+#define ARMV7_PERFCTR_L2_CACHE_REFILL			0x17
+#define ARMV7_PERFCTR_L2_CACHE_WB			0x18
+#define ARMV7_PERFCTR_BUS_ACCESS			0x19
+#define ARMV7_PERFCTR_MEM_ERROR				0x1A
+#define ARMV7_PERFCTR_INSTR_SPEC			0x1B
+#define ARMV7_PERFCTR_TTBR_WRITE			0x1C
+#define ARMV7_PERFCTR_BUS_CYCLES			0x1D
+
+#define ARMV7_PERFCTR_CPU_CYCLES			0xFF
 
 /* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
-	ARMV7_A8_PERFCTR_L2_CACHE_ACCESS		= 0x43,
-	ARMV7_A8_PERFCTR_L2_CACHE_REFILL		= 0x44,
-	ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS		= 0x50,
-	ARMV7_A8_PERFCTR_STALL_ISIDE			= 0x56,
-};
+#define ARMV7_A8_PERFCTR_L2_CACHE_ACCESS		0x43
+#define ARMV7_A8_PERFCTR_L2_CACHE_REFILL		0x44
+#define ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS		0x50
+#define ARMV7_A8_PERFCTR_STALL_ISIDE			0x56
 
 /* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
-	ARMV7_A9_PERFCTR_INSTR_CORE_RENAME		= 0x68,
-	ARMV7_A9_PERFCTR_STALL_ICACHE			= 0x60,
-	ARMV7_A9_PERFCTR_STALL_DISPATCH			= 0x66,
-};
+#define ARMV7_A9_PERFCTR_INSTR_CORE_RENAME		0x68
+#define ARMV7_A9_PERFCTR_STALL_ICACHE			0x60
+#define ARMV7_A9_PERFCTR_STALL_DISPATCH			0x66
 
 /* ARMv7 Cortex-A5 specific event types */
-enum armv7_a5_perf_types {
-	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL		= 0xc2,
-	ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP		= 0xc3,
-};
+#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL		0xc2
+#define ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP		0xc3
 
 /* ARMv7 Cortex-A15 specific event types */
-enum armv7_a15_perf_types {
-	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ		= 0x40,
-	ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE	= 0x41,
-	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ		= 0x42,
-	ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE	= 0x43,
+#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ		0x40
+#define ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE	0x41
+#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ		0x42
+#define ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE	0x43
 
-	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ		= 0x4C,
-	ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE		= 0x4D,
+#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ		0x4C
+#define ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE		0x4D
 
-	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ		= 0x50,
-	ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE		= 0x51,
-	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ		= 0x52,
-	ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE		= 0x53,
+#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ		0x50
+#define ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE		0x51
+#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ		0x52
+#define ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE		0x53
 
-	ARMV7_A15_PERFCTR_PC_WRITE_SPEC			= 0x76,
-};
+#define ARMV7_A15_PERFCTR_PC_WRITE_SPEC			0x76
 
 /* ARMv7 Cortex-A12 specific event types */
-enum armv7_a12_perf_types {
-	ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ		= 0x40,
-	ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE	= 0x41,
+#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ		0x40
+#define ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE	0x41
 
-	ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ		= 0x50,
-	ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE		= 0x51,
+#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ		0x50
+#define ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE		0x51
 
-	ARMV7_A12_PERFCTR_PC_WRITE_SPEC			= 0x76,
+#define ARMV7_A12_PERFCTR_PC_WRITE_SPEC			0x76
 
-	ARMV7_A12_PERFCTR_PF_TLB_REFILL			= 0xe7,
-};
+#define ARMV7_A12_PERFCTR_PF_TLB_REFILL			0xe7
 
 /* ARMv7 Krait specific event types */
-enum krait_perf_types {
-	KRAIT_PMRESR0_GROUP0				= 0xcc,
-	KRAIT_PMRESR1_GROUP0				= 0xd0,
-	KRAIT_PMRESR2_GROUP0				= 0xd4,
-	KRAIT_VPMRESR0_GROUP0				= 0xd8,
+#define KRAIT_PMRESR0_GROUP0				0xcc
+#define KRAIT_PMRESR1_GROUP0				0xd0
+#define KRAIT_PMRESR2_GROUP0				0xd4
+#define KRAIT_VPMRESR0_GROUP0				0xd8
 
-	KRAIT_PERFCTR_L1_ICACHE_ACCESS			= 0x10011,
-	KRAIT_PERFCTR_L1_ICACHE_MISS			= 0x10010,
+#define KRAIT_PERFCTR_L1_ICACHE_ACCESS			0x10011
+#define KRAIT_PERFCTR_L1_ICACHE_MISS			0x10010
 
-	KRAIT_PERFCTR_L1_ITLB_ACCESS			= 0x12222,
-	KRAIT_PERFCTR_L1_DTLB_ACCESS			= 0x12210,
-};
+#define KRAIT_PERFCTR_L1_ITLB_ACCESS			0x12222
+#define KRAIT_PERFCTR_L1_DTLB_ACCESS			0x12210
 
 /* ARMv7 Scorpion specific event types */
-enum scorpion_perf_types {
-	SCORPION_LPM0_GROUP0				= 0x4c,
-	SCORPION_LPM1_GROUP0				= 0x50,
-	SCORPION_LPM2_GROUP0				= 0x54,
-	SCORPION_L2LPM_GROUP0				= 0x58,
-	SCORPION_VLPM_GROUP0				= 0x5c,
+#define SCORPION_LPM0_GROUP0				0x4c
+#define SCORPION_LPM1_GROUP0				0x50
+#define SCORPION_LPM2_GROUP0				0x54
+#define SCORPION_L2LPM_GROUP0				0x58
+#define SCORPION_VLPM_GROUP0				0x5c
 
-	SCORPION_ICACHE_ACCESS				= 0x10053,
-	SCORPION_ICACHE_MISS				= 0x10052,
+#define SCORPION_ICACHE_ACCESS				0x10053
+#define SCORPION_ICACHE_MISS				0x10052
 
-	SCORPION_DTLB_ACCESS				= 0x12013,
-	SCORPION_DTLB_MISS				= 0x12012,
+#define SCORPION_DTLB_ACCESS				0x12013
+#define SCORPION_DTLB_MISS				0x12012
 
-	SCORPION_ITLB_MISS				= 0x12021,
-};
+#define SCORPION_ITLB_MISS				0x12021
 
 /*
  * Cortex-A8 HW events mapping
@@ -547,6 +531,134 @@ static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
 };
 
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *armv7_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group armv7_pmu_format_attr_group = {
+	.name = "format",
+	.attrs = armv7_pmu_format_attrs,
+};
+
+#define ARMV7_EVENT_ATTR_RESOLVE(m) #m
+#define ARMV7_EVENT_ATTR(name, config) \
+	PMU_EVENT_ATTR_STRING(name, armv7_event_attr_##name, \
+			      "event=" ARMV7_EVENT_ATTR_RESOLVE(config))
+
+ARMV7_EVENT_ATTR(sw_incr, ARMV7_PERFCTR_PMNC_SW_INCR);
+ARMV7_EVENT_ATTR(l1i_cache_refill, ARMV7_PERFCTR_L1_ICACHE_REFILL);
+ARMV7_EVENT_ATTR(l1i_tlb_refill, ARMV7_PERFCTR_ITLB_REFILL);
+ARMV7_EVENT_ATTR(l1d_cache_refill, ARMV7_PERFCTR_L1_DCACHE_REFILL);
+ARMV7_EVENT_ATTR(l1d_cache, ARMV7_PERFCTR_L1_DCACHE_ACCESS);
+ARMV7_EVENT_ATTR(l1d_tlb_refill, ARMV7_PERFCTR_DTLB_REFILL);
+ARMV7_EVENT_ATTR(ld_retired, ARMV7_PERFCTR_MEM_READ);
+ARMV7_EVENT_ATTR(st_retired, ARMV7_PERFCTR_MEM_WRITE);
+ARMV7_EVENT_ATTR(inst_retired, ARMV7_PERFCTR_INSTR_EXECUTED);
+ARMV7_EVENT_ATTR(exc_taken, ARMV7_PERFCTR_EXC_TAKEN);
+ARMV7_EVENT_ATTR(exc_return, ARMV7_PERFCTR_EXC_EXECUTED);
+ARMV7_EVENT_ATTR(cid_write_retired, ARMV7_PERFCTR_CID_WRITE);
+ARMV7_EVENT_ATTR(pc_write_retired, ARMV7_PERFCTR_PC_WRITE);
+ARMV7_EVENT_ATTR(br_immed_retired, ARMV7_PERFCTR_PC_IMM_BRANCH);
+ARMV7_EVENT_ATTR(br_return_retired, ARMV7_PERFCTR_PC_PROC_RETURN);
+ARMV7_EVENT_ATTR(unaligned_ldst_retired, ARMV7_PERFCTR_MEM_UNALIGNED_ACCESS);
+ARMV7_EVENT_ATTR(br_mis_pred, ARMV7_PERFCTR_PC_BRANCH_MIS_PRED);
+ARMV7_EVENT_ATTR(cpu_cycles, ARMV7_PERFCTR_CLOCK_CYCLES);
+ARMV7_EVENT_ATTR(br_pred, ARMV7_PERFCTR_PC_BRANCH_PRED);
+
+static struct attribute *armv7_pmuv1_event_attrs[] = {
+	&armv7_event_attr_sw_incr.attr.attr,
+	&armv7_event_attr_l1i_cache_refill.attr.attr,
+	&armv7_event_attr_l1i_tlb_refill.attr.attr,
+	&armv7_event_attr_l1d_cache_refill.attr.attr,
+	&armv7_event_attr_l1d_cache.attr.attr,
+	&armv7_event_attr_l1d_tlb_refill.attr.attr,
+	&armv7_event_attr_ld_retired.attr.attr,
+	&armv7_event_attr_st_retired.attr.attr,
+	&armv7_event_attr_inst_retired.attr.attr,
+	&armv7_event_attr_exc_taken.attr.attr,
+	&armv7_event_attr_exc_return.attr.attr,
+	&armv7_event_attr_cid_write_retired.attr.attr,
+	&armv7_event_attr_pc_write_retired.attr.attr,
+	&armv7_event_attr_br_immed_retired.attr.attr,
+	&armv7_event_attr_br_return_retired.attr.attr,
+	&armv7_event_attr_unaligned_ldst_retired.attr.attr,
+	&armv7_event_attr_br_mis_pred.attr.attr,
+	&armv7_event_attr_cpu_cycles.attr.attr,
+	&armv7_event_attr_br_pred.attr.attr,
+	NULL,
+};
+
+static struct attribute_group armv7_pmuv1_events_attr_group = {
+	.name = "events",
+	.attrs = armv7_pmuv1_event_attrs,
+};
+
+static const struct attribute_group *armv7_pmuv1_attr_groups[] = {
+	&armv7_pmuv1_events_attr_group,
+	&armv7_pmu_format_attr_group,
+	NULL,
+};
+
+ARMV7_EVENT_ATTR(mem_access, ARMV7_PERFCTR_MEM_ACCESS);
+ARMV7_EVENT_ATTR(l1i_cache, ARMV7_PERFCTR_L1_ICACHE_ACCESS);
+ARMV7_EVENT_ATTR(l1d_cache_wb, ARMV7_PERFCTR_L1_DCACHE_WB);
+ARMV7_EVENT_ATTR(l2d_cache, ARMV7_PERFCTR_L2_CACHE_ACCESS);
+ARMV7_EVENT_ATTR(l2d_cache_refill, ARMV7_PERFCTR_L2_CACHE_REFILL);
+ARMV7_EVENT_ATTR(l2d_cache_wb, ARMV7_PERFCTR_L2_CACHE_WB);
+ARMV7_EVENT_ATTR(bus_access, ARMV7_PERFCTR_BUS_ACCESS);
+ARMV7_EVENT_ATTR(memory_error, ARMV7_PERFCTR_MEM_ERROR);
+ARMV7_EVENT_ATTR(inst_spec, ARMV7_PERFCTR_INSTR_SPEC);
+ARMV7_EVENT_ATTR(ttbr_write_retired, ARMV7_PERFCTR_TTBR_WRITE);
+ARMV7_EVENT_ATTR(bus_cycles, ARMV7_PERFCTR_BUS_CYCLES);
+
+static struct attribute *armv7_pmuv2_event_attrs[] = {
+	&armv7_event_attr_sw_incr.attr.attr,
+	&armv7_event_attr_l1i_cache_refill.attr.attr,
+	&armv7_event_attr_l1i_tlb_refill.attr.attr,
+	&armv7_event_attr_l1d_cache_refill.attr.attr,
+	&armv7_event_attr_l1d_cache.attr.attr,
+	&armv7_event_attr_l1d_tlb_refill.attr.attr,
+	&armv7_event_attr_ld_retired.attr.attr,
+	&armv7_event_attr_st_retired.attr.attr,
+	&armv7_event_attr_inst_retired.attr.attr,
+	&armv7_event_attr_exc_taken.attr.attr,
+	&armv7_event_attr_exc_return.attr.attr,
+	&armv7_event_attr_cid_write_retired.attr.attr,
+	&armv7_event_attr_pc_write_retired.attr.attr,
+	&armv7_event_attr_br_immed_retired.attr.attr,
+	&armv7_event_attr_br_return_retired.attr.attr,
+	&armv7_event_attr_unaligned_ldst_retired.attr.attr,
+	&armv7_event_attr_br_mis_pred.attr.attr,
+	&armv7_event_attr_cpu_cycles.attr.attr,
+	&armv7_event_attr_br_pred.attr.attr,
+	&armv7_event_attr_mem_access.attr.attr,
+	&armv7_event_attr_l1i_cache.attr.attr,
+	&armv7_event_attr_l1d_cache_wb.attr.attr,
+	&armv7_event_attr_l2d_cache.attr.attr,
+	&armv7_event_attr_l2d_cache_refill.attr.attr,
+	&armv7_event_attr_l2d_cache_wb.attr.attr,
+	&armv7_event_attr_bus_access.attr.attr,
+	&armv7_event_attr_memory_error.attr.attr,
+	&armv7_event_attr_inst_spec.attr.attr,
+	&armv7_event_attr_ttbr_write_retired.attr.attr,
+	&armv7_event_attr_bus_cycles.attr.attr,
+	NULL,
+};
+
+static struct attribute_group armv7_pmuv2_events_attr_group = {
+	.name = "events",
+	.attrs = armv7_pmuv2_event_attrs,
+};
+
+static const struct attribute_group *armv7_pmuv2_attr_groups[] = {
+	&armv7_pmuv2_events_attr_group,
+	&armv7_pmu_format_attr_group,
+	NULL,
+};
+
 /*
  * Perf Events' indices
  */
@@ -600,6 +712,11 @@ static const unsigned scorpion_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 #define	ARMV7_EXCLUDE_USER	(1 << 30)
 #define	ARMV7_INCLUDE_HYP	(1 << 27)
 
+/*
+ * Secure debug enable reg
+ */
+#define ARMV7_SDER_SUNIDEN	BIT(1) /* Permit non-invasive debug */
+
 static inline u32 armv7_pmnc_read(void)
 {
 	u32 val;
@@ -982,7 +1099,13 @@ static int armv7pmu_set_event_filter(struct hw_perf_event *event,
 static void armv7pmu_reset(void *info)
 {
 	struct arm_pmu *cpu_pmu = (struct arm_pmu *)info;
-	u32 idx, nb_cnt = cpu_pmu->num_events;
+	u32 idx, nb_cnt = cpu_pmu->num_events, val;
+
+	if (cpu_pmu->secure_access) {
+		asm volatile("mrc p15, 0, %0, c1, c1, 1" : "=r" (val));
+		val |= ARMV7_SDER_SUNIDEN;
+		asm volatile("mcr p15, 0, %0, c1, c1, 1" : : "r" (val));
+	}
 
 	/* The counter and interrupt enable registers are unknown at reset. */
 	for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx) {
@@ -1085,6 +1208,7 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a8";
 	cpu_pmu->map_event	= armv7_a8_map_event;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1093,6 +1217,7 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a9";
 	cpu_pmu->map_event	= armv7_a9_map_event;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1101,6 +1226,7 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 	armv7pmu_init(cpu_pmu);
 	cpu_pmu->name		= "armv7_cortex_a5";
 	cpu_pmu->map_event	= armv7_a5_map_event;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv1_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1110,6 +1236,7 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a15";
 	cpu_pmu->map_event	= armv7_a15_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1119,6 +1246,7 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a7";
 	cpu_pmu->map_event	= armv7_a7_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1128,6 +1256,7 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu)
 	cpu_pmu->name		= "armv7_cortex_a12";
 	cpu_pmu->map_event	= armv7_a12_map_event;
 	cpu_pmu->set_event_filter = armv7pmu_set_event_filter;
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return armv7_probe_num_events(cpu_pmu);
 }
 
@@ -1135,6 +1264,7 @@ static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu)
 {
 	int ret = armv7_a12_pmu_init(cpu_pmu);
 	cpu_pmu->name = "armv7_cortex_a17";
+	cpu_pmu->pmu.attr_groups = armv7_pmuv2_attr_groups;
 	return ret;
 }
 
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
index 8153e36b2491..7c9248b74d3f 100644
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -66,9 +66,13 @@ static void __init pj4_cp_access_write(u32 value)
 
 	__asm__ __volatile__ (
 		"mcr	p15, 0, %1, c1, c0, 2\n\t"
+#ifdef CONFIG_THUMB2_KERNEL
+		"isb\n\t"
+#else
 		"mrc	p15, 0, %0, c1, c0, 2\n\t"
 		"mov	%0, %0\n\t"
 		"sub	pc, pc, #4\n\t"
+#endif
 		: "=r" (temp) : "r" (value));
 }
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 7a7c4cea5523..4adfb46e3ee9 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -95,6 +95,22 @@ void __show_regs(struct pt_regs *regs)
 {
 	unsigned long flags;
 	char buf[64];
+#ifndef CONFIG_CPU_V7M
+	unsigned int domain;
+#ifdef CONFIG_CPU_SW_DOMAIN_PAN
+	/*
+	 * Get the domain register for the parent context. In user
+	 * mode, we don't save the DACR, so lets use what it should
+	 * be. For other modes, we place it after the pt_regs struct.
+	 */
+	if (user_mode(regs))
+		domain = DACR_UACCESS_ENABLE;
+	else
+		domain = *(unsigned int *)(regs + 1);
+#else
+	domain = get_domain();
+#endif
+#endif
 
 	show_regs_print_info(KERN_DEFAULT);
 
@@ -123,21 +139,8 @@ void __show_regs(struct pt_regs *regs)
 
 #ifndef CONFIG_CPU_V7M
 	{
-		unsigned int domain = get_domain();
 		const char *segment;
 
-#ifdef CONFIG_CPU_SW_DOMAIN_PAN
-		/*
-		 * Get the domain register for the parent context. In user
-		 * mode, we don't save the DACR, so lets use what it should
-		 * be. For other modes, we place it after the pt_regs struct.
-		 */
-		if (user_mode(regs))
-			domain = DACR_UACCESS_ENABLE;
-		else
-			domain = *(unsigned int *)(regs + 1);
-#endif
-
 		if ((domain & domain_mask(DOMAIN_USER)) ==
 		    domain_val(DOMAIN_USER, DOMAIN_NOACCESS))
 			segment = "none";
@@ -163,11 +166,11 @@ void __show_regs(struct pt_regs *regs)
 		buf[0] = '\0';
 #ifdef CONFIG_CPU_CP15_MMU
 		{
-			unsigned int transbase, dac = get_domain();
+			unsigned int transbase;
 			asm("mrc p15, 0, %0, c2, c0\n\t"
 			    : "=r" (transbase));
 			snprintf(buf, sizeof(buf), "  Table: %08x  DAC: %08x",
-			  	transbase, dac);
+				transbase, domain);
 		}
 #endif
 		asm("mrc p15, 0, %0, c1, c0\n" : "=r" (ctrl));
diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c
index 61c04b02faeb..cb3fcaeb2233 100644
--- a/arch/arm/kernel/psci_smp.c
+++ b/arch/arm/kernel/psci_smp.c
@@ -71,7 +71,7 @@ int psci_cpu_disable(unsigned int cpu)
 	return 0;
 }
 
-void __ref psci_cpu_die(unsigned int cpu)
+void psci_cpu_die(unsigned int cpu)
 {
 	u32 state = PSCI_POWER_STATE_TYPE_POWER_DOWN <<
 		    PSCI_0_2_POWER_STATE_TYPE_SHIFT;
@@ -83,7 +83,7 @@ void __ref psci_cpu_die(unsigned int cpu)
 	panic("psci: cpu %d failed to shutdown\n", cpu);
 }
 
-int __ref psci_cpu_kill(unsigned int cpu)
+int psci_cpu_kill(unsigned int cpu)
 {
 	int err, i;
 
@@ -120,7 +120,7 @@ bool __init psci_smp_available(void)
 	return (psci_ops.cpu_on != NULL);
 }
 
-struct smp_operations __initdata psci_smp_ops = {
+const struct smp_operations psci_smp_ops __initconst = {
 	.smp_boot_secondary	= psci_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= psci_cpu_disable,
diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c
index 38269358fd25..71a2ff9ec490 100644
--- a/arch/arm/kernel/reboot.c
+++ b/arch/arm/kernel/reboot.c
@@ -50,7 +50,7 @@ static void __soft_restart(void *addr)
 	flush_cache_all();
 
 	/* Switch to the identity mapping. */
-	phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset);
+	phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset);
 	phys_reset((unsigned long)addr);
 
 	/* Should never get here. */
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 20edd349d379..a28fce0bdbbe 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/efi.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
@@ -37,7 +38,9 @@
 #include <asm/cp15.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
+#include <asm/efi.h>
 #include <asm/elf.h>
+#include <asm/early_ioremap.h>
 #include <asm/fixmap.h>
 #include <asm/procinfo.h>
 #include <asm/psci.h>
@@ -173,13 +176,13 @@ static struct resource mem_res[] = {
 		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	},
 	{
 		.name = "Kernel data",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	}
 };
 
@@ -375,6 +378,74 @@ void __init early_print(const char *str, ...)
 	printk("%s", buf);
 }
 
+#ifdef CONFIG_ARM_PATCH_IDIV
+
+static inline u32 __attribute_const__ sdiv_instruction(void)
+{
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		/* "sdiv r0, r0, r1" */
+		u32 insn = __opcode_thumb32_compose(0xfb90, 0xf0f1);
+		return __opcode_to_mem_thumb32(insn);
+	}
+
+	/* "sdiv r0, r0, r1" */
+	return __opcode_to_mem_arm(0xe710f110);
+}
+
+static inline u32 __attribute_const__ udiv_instruction(void)
+{
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		/* "udiv r0, r0, r1" */
+		u32 insn = __opcode_thumb32_compose(0xfbb0, 0xf0f1);
+		return __opcode_to_mem_thumb32(insn);
+	}
+
+	/* "udiv r0, r0, r1" */
+	return __opcode_to_mem_arm(0xe730f110);
+}
+
+static inline u32 __attribute_const__ bx_lr_instruction(void)
+{
+	if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
+		/* "bx lr; nop" */
+		u32 insn = __opcode_thumb32_compose(0x4770, 0x46c0);
+		return __opcode_to_mem_thumb32(insn);
+	}
+
+	/* "bx lr" */
+	return __opcode_to_mem_arm(0xe12fff1e);
+}
+
+static void __init patch_aeabi_idiv(void)
+{
+	extern void __aeabi_uidiv(void);
+	extern void __aeabi_idiv(void);
+	uintptr_t fn_addr;
+	unsigned int mask;
+
+	mask = IS_ENABLED(CONFIG_THUMB2_KERNEL) ? HWCAP_IDIVT : HWCAP_IDIVA;
+	if (!(elf_hwcap & mask))
+		return;
+
+	pr_info("CPU: div instructions available: patching division code\n");
+
+	fn_addr = ((uintptr_t)&__aeabi_uidiv) & ~1;
+	asm ("" : "+g" (fn_addr));
+	((u32 *)fn_addr)[0] = udiv_instruction();
+	((u32 *)fn_addr)[1] = bx_lr_instruction();
+	flush_icache_range(fn_addr, fn_addr + 8);
+
+	fn_addr = ((uintptr_t)&__aeabi_idiv) & ~1;
+	asm ("" : "+g" (fn_addr));
+	((u32 *)fn_addr)[0] = sdiv_instruction();
+	((u32 *)fn_addr)[1] = bx_lr_instruction();
+	flush_icache_range(fn_addr, fn_addr + 8);
+}
+
+#else
+static inline void patch_aeabi_idiv(void) { }
+#endif
+
 static void __init cpuid_init_hwcaps(void)
 {
 	int block;
@@ -642,6 +713,7 @@ static void __init setup_processor(void)
 	elf_hwcap = list->elf_hwcap;
 
 	cpuid_init_hwcaps();
+	patch_aeabi_idiv();
 
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
@@ -781,7 +853,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 		res->name  = "System RAM";
 		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
 		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
 
@@ -956,8 +1028,8 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = cmd_line;
 
-	if (IS_ENABLED(CONFIG_FIX_EARLYCON_MEM))
-		early_fixmap_init();
+	early_fixmap_init();
+	early_ioremap_init();
 
 	parse_early_param();
 
@@ -965,9 +1037,12 @@ void __init setup_arch(char **cmdline_p)
 	early_paging_init(mdesc);
 #endif
 	setup_dma_zone(mdesc);
+	efi_init();
 	sanity_check_meminfo();
 	arm_memblock_init(mdesc);
 
+	early_ioremap_reset();
+
 	paging_init(mdesc);
 	request_standard_resources(mdesc);
 
diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S
new file mode 100644
index 000000000000..2e48b674aab1
--- /dev/null
+++ b/arch/arm/kernel/smccc-call.S
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/linkage.h>
+
+#include <asm/opcodes-sec.h>
+#include <asm/opcodes-virt.h>
+#include <asm/unwind.h>
+
+	/*
+	 * Wrap c macros in asm macros to delay expansion until after the
+	 * SMCCC asm macro is expanded.
+	 */
+	.macro SMCCC_SMC
+	__SMC(0)
+	.endm
+
+	.macro SMCCC_HVC
+	__HVC(0)
+	.endm
+
+	.macro SMCCC instr
+UNWIND(	.fnstart)
+	mov	r12, sp
+	push	{r4-r7}
+UNWIND(	.save	{r4-r7})
+	ldm	r12, {r4-r7}
+	\instr
+	pop	{r4-r7}
+	ldr	r12, [sp, #(4 * 4)]
+	stm	r12, {r0-r3}
+	bx	lr
+UNWIND(	.fnend)
+	.endm
+
+/*
+ * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ */
+ENTRY(arm_smccc_smc)
+	SMCCC SMCCC_SMC
+ENDPROC(arm_smccc_smc)
+
+/*
+ * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ */
+ENTRY(arm_smccc_hvc)
+	SMCCC SMCCC_HVC
+ENDPROC(arm_smccc_hvc)
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index b26361355dae..baee70267f29 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -69,11 +69,15 @@ enum ipi_msg_type {
 	IPI_TIMER,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
-	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
 	IPI_IRQ_WORK,
 	IPI_COMPLETION,
-	IPI_CPU_BACKTRACE = 15,
+	IPI_CPU_BACKTRACE,
+	/*
+	 * SGI8-15 can be reserved by secure firmware, and thus may
+	 * not be usable by the kernel. Please keep the above limited
+	 * to at most 8 entries.
+	 */
 };
 
 static DECLARE_COMPLETION(cpu_running);
@@ -405,7 +409,7 @@ asmlinkage void secondary_start_kernel(void)
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -475,7 +479,6 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 	S(IPI_TIMER, "Timer broadcast interrupts"),
 	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
 	S(IPI_CALL_FUNC, "Function call interrupts"),
-	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
 	S(IPI_CPU_STOP, "CPU stop interrupts"),
 	S(IPI_IRQ_WORK, "IRQ work interrupts"),
 	S(IPI_COMPLETION, "completion interrupts"),
@@ -525,7 +528,7 @@ void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC);
 }
 
 #ifdef CONFIG_IRQ_WORK
@@ -620,12 +623,6 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		irq_exit();
 		break;
 
-	case IPI_CALL_FUNC_SINGLE:
-		irq_enter();
-		generic_smp_call_function_single_interrupt();
-		irq_exit();
-		break;
-
 	case IPI_CPU_STOP:
 		irq_enter();
 		ipi_cpu_stop(cpu);
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 5b26e7efa9ea..c3fe769d7558 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -36,10 +36,10 @@
  */
 #define __user_swpX_asm(data, addr, res, temp, B)		\
 	__asm__ __volatile__(					\
-	"	mov		%2, %1\n"			\
-	"0:	ldrex"B"	%1, [%3]\n"			\
-	"1:	strex"B"	%0, %2, [%3]\n"			\
+	"0:	ldrex"B"	%2, [%3]\n"			\
+	"1:	strex"B"	%0, %1, [%3]\n"			\
 	"	cmp		%0, #0\n"			\
+	"	moveq		%1, %2\n"			\
 	"	movne		%0, %4\n"			\
 	"2:\n"							\
 	"	.section	 .text.fixup,\"ax\"\n"		\
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index b83f3b7737fb..087acb569b63 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -193,15 +193,44 @@ struct oabi_flock64 {
 	pid_t	l_pid;
 } __attribute__ ((packed,aligned(4)));
 
-asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
+static long do_locks(unsigned int fd, unsigned int cmd,
 				 unsigned long arg)
 {
-	struct oabi_flock64 user;
 	struct flock64 kernel;
-	mm_segment_t fs = USER_DS; /* initialized to kill a warning */
-	unsigned long local_arg = arg;
-	int ret;
+	struct oabi_flock64 user;
+	mm_segment_t fs;
+	long ret;
+
+	if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
+			   sizeof(user)))
+		return -EFAULT;
+	kernel.l_type	= user.l_type;
+	kernel.l_whence	= user.l_whence;
+	kernel.l_start	= user.l_start;
+	kernel.l_len	= user.l_len;
+	kernel.l_pid	= user.l_pid;
+
+	fs = get_fs();
+	set_fs(KERNEL_DS);
+	ret = sys_fcntl64(fd, cmd, (unsigned long)&kernel);
+	set_fs(fs);
+
+	if (!ret && (cmd == F_GETLK64 || cmd == F_OFD_GETLK)) {
+		user.l_type	= kernel.l_type;
+		user.l_whence	= kernel.l_whence;
+		user.l_start	= kernel.l_start;
+		user.l_len	= kernel.l_len;
+		user.l_pid	= kernel.l_pid;
+		if (copy_to_user((struct oabi_flock64 __user *)arg,
+				 &user, sizeof(user)))
+			ret = -EFAULT;
+	}
+	return ret;
+}
 
+asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
+				 unsigned long arg)
+{
 	switch (cmd) {
 	case F_OFD_GETLK:
 	case F_OFD_SETLK:
@@ -209,39 +238,11 @@ asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 	case F_GETLK64:
 	case F_SETLK64:
 	case F_SETLKW64:
-		if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
-				   sizeof(user)))
-			return -EFAULT;
-		kernel.l_type	= user.l_type;
-		kernel.l_whence	= user.l_whence;
-		kernel.l_start	= user.l_start;
-		kernel.l_len	= user.l_len;
-		kernel.l_pid	= user.l_pid;
-		local_arg = (unsigned long)&kernel;
-		fs = get_fs();
-		set_fs(KERNEL_DS);
-	}
-
-	ret = sys_fcntl64(fd, cmd, local_arg);
+		return do_locks(fd, cmd, arg);
 
-	switch (cmd) {
-	case F_GETLK64:
-		if (!ret) {
-			user.l_type	= kernel.l_type;
-			user.l_whence	= kernel.l_whence;
-			user.l_start	= kernel.l_start;
-			user.l_len	= kernel.l_len;
-			user.l_pid	= kernel.l_pid;
-			if (copy_to_user((struct oabi_flock64 __user *)arg,
-					 &user, sizeof(user)))
-				ret = -EFAULT;
-		}
-	case F_SETLK64:
-	case F_SETLKW64:
-		set_fs(fs);
+	default:
+		return sys_fcntl64(fd, cmd, arg);
 	}
-
-	return ret;
 }
 
 struct oabi_epoll_event {
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 08b7847bf912..ec279d161b32 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -40,7 +40,7 @@
  * to run the rebalance_domains for all idle cores and the cpu_capacity can be
  * updated during this sequence.
  */
-static DEFINE_PER_CPU(unsigned long, cpu_scale);
+static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE;
 
 unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu)
 {
@@ -306,8 +306,6 @@ void __init init_cpu_topology(void)
 		cpu_topo->socket_id = -1;
 		cpumask_clear(&cpu_topo->core_sibling);
 		cpumask_clear(&cpu_topo->thread_sibling);
-
-		set_capacity_scale(cpu, SCHED_CAPACITY_SCALE);
 	}
 	smp_wmb();
 
diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c
index 54a5aeab988d..994e971a8538 100644
--- a/arch/arm/kernel/vdso.c
+++ b/arch/arm/kernel/vdso.c
@@ -224,7 +224,7 @@ static int install_vvar(struct mm_struct *mm, unsigned long addr)
 				       VM_READ | VM_MAYREAD,
 				       &vdso_data_mapping);
 
-	return IS_ERR(vma) ? PTR_ERR(vma) : 0;
+	return PTR_ERR_OR_ZERO(vma);
 }
 
 /* assumes mmap_sem is write-locked */
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
new file mode 100644
index 000000000000..cba1ec899a69
--- /dev/null
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -0,0 +1,316 @@
+/* ld script to make ARM Linux kernel
+ * taken from the i386 version by Russell King
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+#define PROC_INFO							\
+	. = ALIGN(4);							\
+	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
+	*(.proc.info.init)						\
+	VMLINUX_SYMBOL(__proc_info_end) = .;
+
+#define IDMAP_TEXT							\
+	ALIGN_FUNCTION();						\
+	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
+	*(.idmap.text)							\
+	VMLINUX_SYMBOL(__idmap_text_end) = .;				\
+	. = ALIGN(PAGE_SIZE);						\
+	VMLINUX_SYMBOL(__hyp_idmap_text_start) = .;			\
+	*(.hyp.idmap.text)						\
+	VMLINUX_SYMBOL(__hyp_idmap_text_end) = .;
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define ARM_CPU_DISCARD(x)
+#define ARM_CPU_KEEP(x)		x
+#else
+#define ARM_CPU_DISCARD(x)	x
+#define ARM_CPU_KEEP(x)
+#endif
+
+#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \
+	defined(CONFIG_GENERIC_BUG)
+#define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
+#else
+#define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
+#endif
+
+OUTPUT_ARCH(arm)
+ENTRY(stext)
+
+#ifndef __ARMEB__
+jiffies = jiffies_64;
+#else
+jiffies = jiffies_64 + 4;
+#endif
+
+SECTIONS
+{
+	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
+	 * unwind exit sections must be discarded before the rest of the
+	 * unwind sections get included.
+	 */
+	/DISCARD/ : {
+		*(.ARM.exidx.exit.text)
+		*(.ARM.extab.exit.text)
+		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
+		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
+#ifndef CONFIG_MMU
+		*(.text.fixup)
+		*(__ex_table)
+#endif
+#ifndef CONFIG_SMP_ON_UP
+		*(.alt.smp.init)
+#endif
+		*(.discard)
+		*(.discard.*)
+	}
+
+	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+	_xiprom = .;			/* XIP ROM area to be mapped */
+
+	.head.text : {
+		_text = .;
+		HEAD_TEXT
+	}
+
+	.text : {			/* Real text segment		*/
+		_stext = .;		/* Text and read-only data	*/
+			IDMAP_TEXT
+			__exception_text_start = .;
+			*(.exception.text)
+			__exception_text_end = .;
+			IRQENTRY_TEXT
+			TEXT_TEXT
+			SCHED_TEXT
+			LOCK_TEXT
+			KPROBES_TEXT
+			*(.gnu.warning)
+			*(.glue_7)
+			*(.glue_7t)
+		. = ALIGN(4);
+		*(.got)			/* Global offset table		*/
+			ARM_CPU_KEEP(PROC_INFO)
+	}
+
+	RO_DATA(PAGE_SIZE)
+
+	. = ALIGN(4);
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+		__start___ex_table = .;
+#ifdef CONFIG_MMU
+		*(__ex_table)
+#endif
+		__stop___ex_table = .;
+	}
+
+#ifdef CONFIG_ARM_UNWIND
+	/*
+	 * Stack unwinding tables
+	 */
+	. = ALIGN(8);
+	.ARM.unwind_idx : {
+		__start_unwind_idx = .;
+		*(.ARM.exidx*)
+		__stop_unwind_idx = .;
+	}
+	.ARM.unwind_tab : {
+		__start_unwind_tab = .;
+		*(.ARM.extab*)
+		__stop_unwind_tab = .;
+	}
+#endif
+
+	NOTES
+
+	_etext = .;			/* End of text and rodata section */
+
+	/*
+	 * The vectors and stubs are relocatable code, and the
+	 * only thing that matters is their relative offsets
+	 */
+	__vectors_start = .;
+	.vectors 0xffff0000 : AT(__vectors_start) {
+		*(.vectors)
+	}
+	. = __vectors_start + SIZEOF(.vectors);
+	__vectors_end = .;
+
+	__stubs_start = .;
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {
+		*(.stubs)
+	}
+	. = __stubs_start + SIZEOF(.stubs);
+	__stubs_end = .;
+
+	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
+
+	INIT_TEXT_SECTION(8)
+	.exit.text : {
+		ARM_EXIT_KEEP(EXIT_TEXT)
+	}
+	.init.proc.info : {
+		ARM_CPU_DISCARD(PROC_INFO)
+	}
+	.init.arch.info : {
+		__arch_info_begin = .;
+		*(.arch.info.init)
+		__arch_info_end = .;
+	}
+	.init.tagtable : {
+		__tagtable_begin = .;
+		*(.taglist.init)
+		__tagtable_end = .;
+	}
+#ifdef CONFIG_SMP_ON_UP
+	.init.smpalt : {
+		__smpalt_begin = .;
+		*(.alt.smp.init)
+		__smpalt_end = .;
+	}
+#endif
+	.init.pv_table : {
+		__pv_table_begin = .;
+		*(.pv_table)
+		__pv_table_end = .;
+	}
+	.init.data : {
+		INIT_SETUP(16)
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+	}
+
+#ifdef CONFIG_SMP
+	PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
+
+	_exiprom = .;			/* End of XIP ROM area */
+	__data_loc = ALIGN(4);		/* location in binary */
+	. = PAGE_OFFSET + TEXT_OFFSET;
+
+	.data : AT(__data_loc) {
+		_data = .;		/* address in memory */
+		_sdata = .;
+
+		/*
+		 * first, the init task union, aligned
+		 * to an 8192 byte boundary.
+		 */
+		INIT_TASK_DATA(THREAD_SIZE)
+
+		. = ALIGN(PAGE_SIZE);
+		__init_begin = .;
+		INIT_DATA
+		ARM_EXIT_KEEP(EXIT_DATA)
+		. = ALIGN(PAGE_SIZE);
+		__init_end = .;
+
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
+
+		/*
+		 * and the usual data section
+		 */
+		DATA_DATA
+		CONSTRUCTORS
+
+		_edata = .;
+	}
+	_edata_loc = __data_loc + SIZEOF(.data);
+
+#ifdef CONFIG_HAVE_TCM
+        /*
+	 * We align everything to a page boundary so we can
+	 * free it after init has commenced and TCM contents have
+	 * been copied to its destination.
+	 */
+	.tcm_start : {
+		. = ALIGN(PAGE_SIZE);
+		__tcm_start = .;
+		__itcm_start = .;
+	}
+
+	/*
+	 * Link these to the ITCM RAM
+	 * Put VMA to the TCM address and LMA to the common RAM
+	 * and we'll upload the contents from RAM to TCM and free
+	 * the used RAM after that.
+	 */
+	.text_itcm ITCM_OFFSET : AT(__itcm_start)
+	{
+		__sitcm_text = .;
+		*(.tcm.text)
+		*(.tcm.rodata)
+		. = ALIGN(4);
+		__eitcm_text = .;
+	}
+
+	/*
+	 * Reset the dot pointer, this is needed to create the
+	 * relative __dtcm_start below (to be used as extern in code).
+	 */
+	. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+	.dtcm_start : {
+		__dtcm_start = .;
+	}
+
+	/* TODO: add remainder of ITCM as well, that can be used for data! */
+	.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+	{
+		. = ALIGN(4);
+		__sdtcm_data = .;
+		*(.tcm.data)
+		. = ALIGN(4);
+		__edtcm_data = .;
+	}
+
+	/* Reset the dot pointer or the linker gets confused */
+	. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+	/* End marker for freeing TCM copy in linked object */
+	.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+		. = ALIGN(PAGE_SIZE);
+		__tcm_end = .;
+	}
+#endif
+
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	STABS_DEBUG
+}
+
+/*
+ * These must never be empty
+ * If you have to comment these two assert statements out, your
+ * binutils is too old (for other reasons as well)
+ */
+ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
+ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
+
+/*
+ * The HYP init code can't be more than a page long,
+ * and should not cross a page boundary.
+ * The above comment applies as well.
+ */
+ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
+	"HYP init code too big or misaligned")
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 8b60fde5ce48..e2c6da096cef 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -3,14 +3,16 @@
  * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
  */
 
+#ifdef CONFIG_XIP_KERNEL
+#include "vmlinux-xip.lds.S"
+#else
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
-#ifdef CONFIG_ARM_KERNMEM_PERMS
 #include <asm/pgtable.h>
-#endif
 
 #define PROC_INFO							\
 	. = ALIGN(4);							\
@@ -18,6 +20,11 @@
 	*(.proc.info.init)						\
 	VMLINUX_SYMBOL(__proc_info_end) = .;
 
+#define HYPERVISOR_TEXT							\
+	VMLINUX_SYMBOL(__hyp_text_start) = .;				\
+	*(.hyp.text)							\
+	VMLINUX_SYMBOL(__hyp_text_end) = .;
+
 #define IDMAP_TEXT							\
 	ALIGN_FUNCTION();						\
 	VMLINUX_SYMBOL(__idmap_text_start) = .;				\
@@ -84,17 +91,13 @@ SECTIONS
 		*(.discard.*)
 	}
 
-#ifdef CONFIG_XIP_KERNEL
-	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
-#else
 	. = PAGE_OFFSET + TEXT_OFFSET;
-#endif
 	.head.text : {
 		_text = .;
 		HEAD_TEXT
 	}
 
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
 #endif
 
@@ -105,9 +108,11 @@ SECTIONS
 			*(.exception.text)
 			__exception_text_end = .;
 			IRQENTRY_TEXT
+			SOFTIRQENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT
 			LOCK_TEXT
+			HYPERVISOR_TEXT
 			KPROBES_TEXT
 			*(.gnu.warning)
 			*(.glue_7)
@@ -117,7 +122,7 @@ SECTIONS
 			ARM_CPU_KEEP(PROC_INFO)
 	}
 
-#ifdef CONFIG_DEBUG_RODATA
+#ifdef CONFIG_DEBUG_ALIGN_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
 #endif
 	RO_DATA(PAGE_SIZE)
@@ -152,32 +157,33 @@ SECTIONS
 
 	_etext = .;			/* End of text and rodata section */
 
-#ifndef CONFIG_XIP_KERNEL
-# ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
-# else
+#else
 	. = ALIGN(PAGE_SIZE);
-# endif
-	__init_begin = .;
 #endif
+	__init_begin = .;
+
 	/*
 	 * The vectors and stubs are relocatable code, and the
 	 * only thing that matters is their relative offsets
 	 */
 	__vectors_start = .;
-	.vectors 0 : AT(__vectors_start) {
+	.vectors 0xffff0000 : AT(__vectors_start) {
 		*(.vectors)
 	}
 	. = __vectors_start + SIZEOF(.vectors);
 	__vectors_end = .;
 
 	__stubs_start = .;
-	.stubs 0x1000 : AT(__stubs_start) {
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {
 		*(.stubs)
 	}
 	. = __stubs_start + SIZEOF(.stubs);
 	__stubs_end = .;
 
+	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
+
 	INIT_TEXT_SECTION(8)
 	.exit.text : {
 		ARM_EXIT_KEEP(EXIT_TEXT)
@@ -208,37 +214,28 @@ SECTIONS
 		__pv_table_end = .;
 	}
 	.init.data : {
-#ifndef CONFIG_XIP_KERNEL
 		INIT_DATA
-#endif
 		INIT_SETUP(16)
 		INIT_CALLS
 		CON_INITCALL
 		SECURITY_INITCALL
 		INIT_RAM_FS
 	}
-#ifndef CONFIG_XIP_KERNEL
 	.exit.data : {
 		ARM_EXIT_KEEP(EXIT_DATA)
 	}
-#endif
 
 #ifdef CONFIG_SMP
 	PERCPU_SECTION(L1_CACHE_BYTES)
 #endif
 
-#ifdef CONFIG_XIP_KERNEL
-	__data_loc = ALIGN(4);		/* location in binary */
-	. = PAGE_OFFSET + TEXT_OFFSET;
-#else
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 	. = ALIGN(1<<SECTION_SHIFT);
 #else
 	. = ALIGN(THREAD_SIZE);
 #endif
 	__init_end = .;
 	__data_loc = .;
-#endif
 
 	.data : AT(__data_loc) {
 		_data = .;		/* address in memory */
@@ -250,15 +247,6 @@ SECTIONS
 		 */
 		INIT_TASK_DATA(THREAD_SIZE)
 
-#ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(PAGE_SIZE);
-		__init_begin = .;
-		INIT_DATA
-		ARM_EXIT_KEEP(EXIT_DATA)
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
-#endif
-
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
@@ -336,6 +324,15 @@ SECTIONS
 	STABS_DEBUG
 }
 
+#ifdef CONFIG_DEBUG_RODATA
+/*
+ * Without CONFIG_DEBUG_ALIGN_RODATA, __start_rodata_section_aligned will
+ * be the first section-aligned location after __start_rodata. Otherwise,
+ * it will be equal to __start_rodata.
+ */
+__start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT);
+#endif
+
 /*
  * These must never be empty
  * If you have to comment these two assert statements out, your
@@ -351,3 +348,5 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
  */
 ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
 	"HYP init code too big or misaligned")
+
+#endif /* CONFIG_XIP_KERNEL */
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index bdbb8853a19b..77a2eef72115 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -15,6 +15,9 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <asm/thread_notify.h>
+#include <asm/cputype.h>
+
+asm("	.arch armv5te\n");
 
 static inline void dsp_save_state(u32 *state)
 {
@@ -152,6 +155,10 @@ static int __init xscale_cp0_init(void)
 {
 	u32 cp_access;
 
+	/* do not attempt to probe iwmmxt on non-xscale family CPUs */
+	if (!cpu_is_xscale_family())
+		return 0;
+
 	cp_access = xscale_cp_access_read() & ~3;
 	xscale_cp_access_write(cp_access | 1);
 
diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile
index c5eef02c52ba..eb1bf4309c13 100644
--- a/arch/arm/kvm/Makefile
+++ b/arch/arm/kvm/Makefile
@@ -17,6 +17,7 @@ AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt)
 KVM := ../../../virt/kvm
 kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o
 
+obj-$(CONFIG_KVM_ARM_HOST) += hyp/
 obj-y += kvm-arm.o init.o interrupts.o
 obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o
 obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index eab83b2435b8..dded1b763c16 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -28,6 +28,7 @@
 #include <linux/sched.h>
 #include <linux/kvm.h>
 #include <trace/events/kvm.h>
+#include <kvm/arm_pmu.h>
 
 #define CREATE_TRACE_POINTS
 #include "trace.h"
@@ -44,6 +45,7 @@
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
 #include <asm/kvm_psci.h>
+#include <asm/sections.h>
 
 #ifdef REQUIRES_VIRT
 __asm__(".arch_extension	virt");
@@ -58,9 +60,12 @@ static DEFINE_PER_CPU(struct kvm_vcpu *, kvm_arm_running_vcpu);
 
 /* The VMID used in the VTTBR */
 static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
-static u8 kvm_next_vmid;
+static u32 kvm_next_vmid;
+static unsigned int kvm_vmid_bits __read_mostly;
 static DEFINE_SPINLOCK(kvm_vmid_lock);
 
+static bool vgic_present;
+
 static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
 {
 	BUG_ON(preemptible());
@@ -132,7 +137,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	kvm->arch.vmid_gen = 0;
 
 	/* The maximum number of VCPUs is limited by the host's GIC model */
-	kvm->arch.max_vcpus = kvm_vgic_get_max_vcpus();
+	kvm->arch.max_vcpus = vgic_present ?
+				kvm_vgic_get_max_vcpus() : KVM_MAX_VCPUS;
 
 	return ret;
 out_free_stage2_pgd:
@@ -172,6 +178,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	int r;
 	switch (ext) {
 	case KVM_CAP_IRQCHIP:
+		r = vgic_present;
+		break;
 	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_DEVICE_CTRL:
 	case KVM_CAP_USER_MEMORY:
@@ -258,6 +266,7 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
 	kvm_mmu_free_memory_caches(vcpu);
 	kvm_timer_vcpu_terminate(vcpu);
 	kvm_vgic_vcpu_destroy(vcpu);
+	kvm_pmu_vcpu_destroy(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, vcpu);
 }
 
@@ -313,6 +322,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 	vcpu->cpu = -1;
 
 	kvm_arm_set_running_vcpu(NULL);
+	kvm_timer_vcpu_put(vcpu);
 }
 
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
@@ -363,7 +373,9 @@ static void exit_vm_noop(void *info)
 
 void force_vm_exit(const cpumask_t *mask)
 {
+	preempt_disable();
 	smp_call_function_many(mask, exit_vm_noop, NULL, true);
+	preempt_enable();
 }
 
 /**
@@ -433,11 +445,12 @@ static void update_vttbr(struct kvm *kvm)
 	kvm->arch.vmid_gen = atomic64_read(&kvm_vmid_gen);
 	kvm->arch.vmid = kvm_next_vmid;
 	kvm_next_vmid++;
+	kvm_next_vmid &= (1 << kvm_vmid_bits) - 1;
 
 	/* update vttbr to be used with the new vmid */
 	pgd_phys = virt_to_phys(kvm_get_hwpgd(kvm));
 	BUG_ON(pgd_phys & ~VTTBR_BADDR_MASK);
-	vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK;
+	vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK(kvm_vmid_bits);
 	kvm->arch.vttbr = pgd_phys | vmid;
 
 	spin_unlock(&kvm_vmid_lock);
@@ -498,18 +511,18 @@ static void kvm_arm_resume_guest(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 
 	kvm_for_each_vcpu(i, vcpu, kvm) {
-		wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
+		struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu);
 
 		vcpu->arch.pause = false;
-		wake_up_interruptible(wq);
+		swake_up(wq);
 	}
 }
 
 static void vcpu_sleep(struct kvm_vcpu *vcpu)
 {
-	wait_queue_head_t *wq = kvm_arch_vcpu_wq(vcpu);
+	struct swait_queue_head *wq = kvm_arch_vcpu_wq(vcpu);
 
-	wait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
+	swait_event_interruptible(*wq, ((!vcpu->arch.power_off) &&
 				       (!vcpu->arch.pause)));
 }
 
@@ -564,17 +577,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 			vcpu_sleep(vcpu);
 
 		/*
-		 * Disarming the background timer must be done in a
-		 * preemptible context, as this call may sleep.
-		 */
-		kvm_timer_flush_hwstate(vcpu);
-
-		/*
 		 * Preparing the interrupts to be injected also
 		 * involves poking the GIC, which must be done in a
 		 * non-preemptible context.
 		 */
 		preempt_disable();
+		kvm_pmu_flush_hwstate(vcpu);
+		kvm_timer_flush_hwstate(vcpu);
 		kvm_vgic_flush_hwstate(vcpu);
 
 		local_irq_disable();
@@ -590,6 +599,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		if (ret <= 0 || need_new_vmid_gen(vcpu->kvm) ||
 			vcpu->arch.power_off || vcpu->arch.pause) {
 			local_irq_enable();
+			kvm_pmu_sync_hwstate(vcpu);
 			kvm_timer_sync_hwstate(vcpu);
 			kvm_vgic_sync_hwstate(vcpu);
 			preempt_enable();
@@ -608,6 +618,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		ret = kvm_call_hyp(__kvm_vcpu_run, vcpu);
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
+		vcpu->stat.exits++;
 		/*
 		 * Back from guest
 		 *************************************************************/
@@ -638,10 +649,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
 
 		/*
-		 * We must sync the timer state before the vgic state so that
-		 * the vgic can properly sample the updated state of the
+		 * We must sync the PMU and timer state before the vgic state so
+		 * that the vgic can properly sample the updated state of the
 		 * interrupt line.
 		 */
+		kvm_pmu_sync_hwstate(vcpu);
 		kvm_timer_sync_hwstate(vcpu);
 
 		kvm_vgic_sync_hwstate(vcpu);
@@ -819,11 +831,54 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static int kvm_arm_vcpu_set_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_set_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_arm_vcpu_get_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_get_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
+static int kvm_arm_vcpu_has_attr(struct kvm_vcpu *vcpu,
+				 struct kvm_device_attr *attr)
+{
+	int ret = -ENXIO;
+
+	switch (attr->group) {
+	default:
+		ret = kvm_arm_vcpu_arch_has_attr(vcpu, attr);
+		break;
+	}
+
+	return ret;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
 	struct kvm_vcpu *vcpu = filp->private_data;
 	void __user *argp = (void __user *)arg;
+	struct kvm_device_attr attr;
 
 	switch (ioctl) {
 	case KVM_ARM_VCPU_INIT: {
@@ -866,6 +921,21 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 			return -E2BIG;
 		return kvm_arm_copy_reg_indices(vcpu, user_list->reg);
 	}
+	case KVM_SET_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+		return kvm_arm_vcpu_set_attr(vcpu, &attr);
+	}
+	case KVM_GET_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+		return kvm_arm_vcpu_get_attr(vcpu, &attr);
+	}
+	case KVM_HAS_DEVICE_ATTR: {
+		if (copy_from_user(&attr, argp, sizeof(attr)))
+			return -EFAULT;
+		return kvm_arm_vcpu_has_attr(vcpu, &attr);
+	}
 	default:
 		return -EINVAL;
 	}
@@ -918,6 +988,8 @@ static int kvm_vm_ioctl_set_device_addr(struct kvm *kvm,
 
 	switch (dev_id) {
 	case KVM_ARM_DEVICE_VGIC_V2:
+		if (!vgic_present)
+			return -ENXIO;
 		return kvm_vgic_addr(kvm, type, &dev_addr->addr, true);
 	default:
 		return -ENODEV;
@@ -932,6 +1004,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 
 	switch (ioctl) {
 	case KVM_CREATE_IRQCHIP: {
+		if (!vgic_present)
+			return -ENXIO;
 		return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
 	}
 	case KVM_ARM_SET_DEVICE_ADDR: {
@@ -959,6 +1033,11 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	}
 }
 
+static void cpu_init_stage2(void *dummy)
+{
+	__cpu_init_stage2();
+}
+
 static void cpu_init_hyp_mode(void *dummy)
 {
 	phys_addr_t boot_pgd_ptr;
@@ -974,22 +1053,35 @@ static void cpu_init_hyp_mode(void *dummy)
 	pgd_ptr = kvm_mmu_get_httbr();
 	stack_page = __this_cpu_read(kvm_arm_hyp_stack_page);
 	hyp_stack_ptr = stack_page + PAGE_SIZE;
-	vector_ptr = (unsigned long)__kvm_hyp_vector;
+	vector_ptr = (unsigned long)kvm_ksym_ref(__kvm_hyp_vector);
 
 	__cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr);
+	__cpu_init_stage2();
 
 	kvm_arm_init_debug();
 }
 
+static void cpu_hyp_reinit(void)
+{
+	if (is_kernel_in_hyp_mode()) {
+		/*
+		 * cpu_init_stage2() is safe to call even if the PM
+		 * event was cancelled before the CPU was reset.
+		 */
+		cpu_init_stage2(NULL);
+	} else {
+		if (__hyp_get_vectors() == hyp_default_vectors)
+			cpu_init_hyp_mode(NULL);
+	}
+}
+
 static int hyp_init_cpu_notify(struct notifier_block *self,
 			       unsigned long action, void *cpu)
 {
 	switch (action) {
 	case CPU_STARTING:
 	case CPU_STARTING_FROZEN:
-		if (__hyp_get_vectors() == hyp_default_vectors)
-			cpu_init_hyp_mode(NULL);
-		break;
+		cpu_hyp_reinit();
 	}
 
 	return NOTIFY_OK;
@@ -1004,9 +1096,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
 				    unsigned long cmd,
 				    void *v)
 {
-	if (cmd == CPU_PM_EXIT &&
-	    __hyp_get_vectors() == hyp_default_vectors) {
-		cpu_init_hyp_mode(NULL);
+	if (cmd == CPU_PM_EXIT) {
+		cpu_hyp_reinit();
 		return NOTIFY_OK;
 	}
 
@@ -1021,12 +1112,111 @@ static void __init hyp_cpu_pm_init(void)
 {
 	cpu_pm_register_notifier(&hyp_init_cpu_pm_nb);
 }
+static void __init hyp_cpu_pm_exit(void)
+{
+	cpu_pm_unregister_notifier(&hyp_init_cpu_pm_nb);
+}
 #else
 static inline void hyp_cpu_pm_init(void)
 {
 }
+static inline void hyp_cpu_pm_exit(void)
+{
+}
 #endif
 
+static void teardown_common_resources(void)
+{
+	free_percpu(kvm_host_cpu_state);
+}
+
+static int init_common_resources(void)
+{
+	kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t);
+	if (!kvm_host_cpu_state) {
+		kvm_err("Cannot allocate host CPU state\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int init_subsystems(void)
+{
+	int err;
+
+	/*
+	 * Register CPU Hotplug notifier
+	 */
+	err = register_cpu_notifier(&hyp_init_cpu_nb);
+	if (err) {
+		kvm_err("Cannot register KVM init CPU notifier (%d)\n", err);
+		return err;
+	}
+
+	/*
+	 * Register CPU lower-power notifier
+	 */
+	hyp_cpu_pm_init();
+
+	/*
+	 * Init HYP view of VGIC
+	 */
+	err = kvm_vgic_hyp_init();
+	switch (err) {
+	case 0:
+		vgic_present = true;
+		break;
+	case -ENODEV:
+	case -ENXIO:
+		vgic_present = false;
+		break;
+	default:
+		return err;
+	}
+
+	/*
+	 * Init HYP architected timer support
+	 */
+	err = kvm_timer_hyp_init();
+	if (err)
+		return err;
+
+	kvm_perf_init();
+	kvm_coproc_table_init();
+
+	return 0;
+}
+
+static void teardown_hyp_mode(void)
+{
+	int cpu;
+
+	if (is_kernel_in_hyp_mode())
+		return;
+
+	free_hyp_pgds();
+	for_each_possible_cpu(cpu)
+		free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
+	unregister_cpu_notifier(&hyp_init_cpu_nb);
+	hyp_cpu_pm_exit();
+}
+
+static int init_vhe_mode(void)
+{
+	/*
+	 * Execute the init code on each CPU.
+	 */
+	on_each_cpu(cpu_init_stage2, NULL, 1);
+
+	/* set size of VMID supported by CPU */
+	kvm_vmid_bits = kvm_get_vmid_bits();
+	kvm_info("%d-bit VMID\n", kvm_vmid_bits);
+
+	kvm_info("VHE mode initialized successfully\n");
+	return 0;
+}
+
 /**
  * Inits Hyp-mode on all online CPUs
  */
@@ -1057,7 +1247,7 @@ static int init_hyp_mode(void)
 		stack_page = __get_free_page(GFP_KERNEL);
 		if (!stack_page) {
 			err = -ENOMEM;
-			goto out_free_stack_pages;
+			goto out_err;
 		}
 
 		per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
@@ -1066,10 +1256,18 @@ static int init_hyp_mode(void)
 	/*
 	 * Map the Hyp-code called directly from the host
 	 */
-	err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end);
+	err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start),
+				  kvm_ksym_ref(__hyp_text_end));
 	if (err) {
 		kvm_err("Cannot map world-switch code\n");
-		goto out_free_mappings;
+		goto out_err;
+	}
+
+	err = create_hyp_mappings(kvm_ksym_ref(__start_rodata),
+				  kvm_ksym_ref(__end_rodata));
+	if (err) {
+		kvm_err("Cannot map rodata section\n");
+		goto out_err;
 	}
 
 	/*
@@ -1081,20 +1279,10 @@ static int init_hyp_mode(void)
 
 		if (err) {
 			kvm_err("Cannot map hyp stack\n");
-			goto out_free_mappings;
+			goto out_err;
 		}
 	}
 
-	/*
-	 * Map the host CPU structures
-	 */
-	kvm_host_cpu_state = alloc_percpu(kvm_cpu_context_t);
-	if (!kvm_host_cpu_state) {
-		err = -ENOMEM;
-		kvm_err("Cannot allocate host CPU state\n");
-		goto out_free_mappings;
-	}
-
 	for_each_possible_cpu(cpu) {
 		kvm_cpu_context_t *cpu_ctxt;
 
@@ -1103,7 +1291,7 @@ static int init_hyp_mode(void)
 
 		if (err) {
 			kvm_err("Cannot map host CPU state: %d\n", err);
-			goto out_free_context;
+			goto out_err;
 		}
 	}
 
@@ -1112,37 +1300,20 @@ static int init_hyp_mode(void)
 	 */
 	on_each_cpu(cpu_init_hyp_mode, NULL, 1);
 
-	/*
-	 * Init HYP view of VGIC
-	 */
-	err = kvm_vgic_hyp_init();
-	if (err)
-		goto out_free_context;
-
-	/*
-	 * Init HYP architected timer support
-	 */
-	err = kvm_timer_hyp_init();
-	if (err)
-		goto out_free_context;
-
 #ifndef CONFIG_HOTPLUG_CPU
 	free_boot_hyp_pgd();
 #endif
 
-	kvm_perf_init();
+	/* set size of VMID supported by CPU */
+	kvm_vmid_bits = kvm_get_vmid_bits();
+	kvm_info("%d-bit VMID\n", kvm_vmid_bits);
 
 	kvm_info("Hyp mode initialized successfully\n");
 
 	return 0;
-out_free_context:
-	free_percpu(kvm_host_cpu_state);
-out_free_mappings:
-	free_hyp_pgds();
-out_free_stack_pages:
-	for_each_possible_cpu(cpu)
-		free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
+
 out_err:
+	teardown_hyp_mode();
 	kvm_err("error initializing Hyp mode: %d\n", err);
 	return err;
 }
@@ -1186,26 +1357,27 @@ int kvm_arch_init(void *opaque)
 		}
 	}
 
-	cpu_notifier_register_begin();
-
-	err = init_hyp_mode();
+	err = init_common_resources();
 	if (err)
-		goto out_err;
+		return err;
 
-	err = __register_cpu_notifier(&hyp_init_cpu_nb);
-	if (err) {
-		kvm_err("Cannot register HYP init CPU notifier (%d)\n", err);
+	if (is_kernel_in_hyp_mode())
+		err = init_vhe_mode();
+	else
+		err = init_hyp_mode();
+	if (err)
 		goto out_err;
-	}
 
-	cpu_notifier_register_done();
-
-	hyp_cpu_pm_init();
+	err = init_subsystems();
+	if (err)
+		goto out_hyp;
 
-	kvm_coproc_table_init();
 	return 0;
+
+out_hyp:
+	teardown_hyp_mode();
 out_err:
-	cpu_notifier_register_done();
+	teardown_common_resources();
 	return err;
 }
 
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index f3d88dc388bc..1bb2b79c01ff 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -16,6 +16,8 @@
  * along with this program; if not, write to the Free Software
  * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  */
+
+#include <linux/bsearch.h>
 #include <linux/mm.h>
 #include <linux/kvm_host.h>
 #include <linux/uaccess.h>
@@ -54,8 +56,8 @@ static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu,
 				       const struct coproc_reg *r,
 				       u64 val)
 {
-	vcpu->arch.cp15[r->reg] = val & 0xffffffff;
-	vcpu->arch.cp15[r->reg + 1] = val >> 32;
+	vcpu_cp15(vcpu, r->reg) = val & 0xffffffff;
+	vcpu_cp15(vcpu, r->reg + 1) = val >> 32;
 }
 
 static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu,
@@ -63,9 +65,9 @@ static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu,
 {
 	u64 val;
 
-	val = vcpu->arch.cp15[r->reg + 1];
+	val = vcpu_cp15(vcpu, r->reg + 1);
 	val = val << 32;
-	val = val | vcpu->arch.cp15[r->reg];
+	val = val | vcpu_cp15(vcpu, r->reg);
 	return val;
 }
 
@@ -104,7 +106,7 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 	 * vcpu_id, but we read the 'U' bit from the underlying
 	 * hardware directly.
 	 */
-	vcpu->arch.cp15[c0_MPIDR] = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) |
+	vcpu_cp15(vcpu, c0_MPIDR) = ((read_cpuid_mpidr() & MPIDR_SMP_BITMASK) |
 				     ((vcpu->vcpu_id >> 2) << MPIDR_LEVEL_BITS) |
 				     (vcpu->vcpu_id & 3));
 }
@@ -117,7 +119,7 @@ static bool access_actlr(struct kvm_vcpu *vcpu,
 	if (p->is_write)
 		return ignore_write(vcpu, p);
 
-	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c1_ACTLR];
+	*vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c1_ACTLR);
 	return true;
 }
 
@@ -139,7 +141,7 @@ static bool access_l2ctlr(struct kvm_vcpu *vcpu,
 	if (p->is_write)
 		return ignore_write(vcpu, p);
 
-	*vcpu_reg(vcpu, p->Rt1) = vcpu->arch.cp15[c9_L2CTLR];
+	*vcpu_reg(vcpu, p->Rt1) = vcpu_cp15(vcpu, c9_L2CTLR);
 	return true;
 }
 
@@ -156,7 +158,7 @@ static void reset_l2ctlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 	ncores = min(ncores, 3U);
 	l2ctlr |= (ncores & 3) << 24;
 
-	vcpu->arch.cp15[c9_L2CTLR] = l2ctlr;
+	vcpu_cp15(vcpu, c9_L2CTLR) = l2ctlr;
 }
 
 static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
@@ -171,7 +173,7 @@ static void reset_actlr(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 	else
 		actlr &= ~(1U << 6);
 
-	vcpu->arch.cp15[c1_ACTLR] = actlr;
+	vcpu_cp15(vcpu, c1_ACTLR) = actlr;
 }
 
 /*
@@ -218,9 +220,9 @@ bool access_vm_reg(struct kvm_vcpu *vcpu,
 
 	BUG_ON(!p->is_write);
 
-	vcpu->arch.cp15[r->reg] = *vcpu_reg(vcpu, p->Rt1);
+	vcpu_cp15(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt1);
 	if (p->is_64bit)
-		vcpu->arch.cp15[r->reg + 1] = *vcpu_reg(vcpu, p->Rt2);
+		vcpu_cp15(vcpu, r->reg + 1) = *vcpu_reg(vcpu, p->Rt2);
 
 	kvm_toggle_cache(vcpu, was_enabled);
 	return true;
@@ -381,17 +383,26 @@ static const struct coproc_reg cp15_regs[] = {
 	{ CRn(15), CRm( 0), Op1( 4), Op2( 0), is32, access_cbar},
 };
 
+static int check_reg_table(const struct coproc_reg *table, unsigned int n)
+{
+	unsigned int i;
+
+	for (i = 1; i < n; i++) {
+		if (cmp_reg(&table[i-1], &table[i]) >= 0) {
+			kvm_err("reg table %p out of order (%d)\n", table, i - 1);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
 /* Target specific emulation tables */
 static struct kvm_coproc_target_table *target_tables[KVM_ARM_NUM_TARGETS];
 
 void kvm_register_target_coproc_table(struct kvm_coproc_target_table *table)
 {
-	unsigned int i;
-
-	for (i = 1; i < table->num; i++)
-		BUG_ON(cmp_reg(&table->table[i-1],
-			       &table->table[i]) >= 0);
-
+	BUG_ON(check_reg_table(table->table, table->num));
 	target_tables[table->target] = table;
 }
 
@@ -405,29 +416,32 @@ static const struct coproc_reg *get_target_table(unsigned target, size_t *num)
 	return table->table;
 }
 
+#define reg_to_match_value(x)						\
+	({								\
+		unsigned long val;					\
+		val  = (x)->CRn << 11;					\
+		val |= (x)->CRm << 7;					\
+		val |= (x)->Op1 << 4;					\
+		val |= (x)->Op2 << 1;					\
+		val |= !(x)->is_64bit;					\
+		val;							\
+	 })
+
+static int match_reg(const void *key, const void *elt)
+{
+	const unsigned long pval = (unsigned long)key;
+	const struct coproc_reg *r = elt;
+
+	return pval - reg_to_match_value(r);
+}
+
 static const struct coproc_reg *find_reg(const struct coproc_params *params,
 					 const struct coproc_reg table[],
 					 unsigned int num)
 {
-	unsigned int i;
-
-	for (i = 0; i < num; i++) {
-		const struct coproc_reg *r = &table[i];
-
-		if (params->is_64bit != r->is_64)
-			continue;
-		if (params->CRn != r->CRn)
-			continue;
-		if (params->CRm != r->CRm)
-			continue;
-		if (params->Op1 != r->Op1)
-			continue;
-		if (params->Op2 != r->Op2)
-			continue;
+	unsigned long pval = reg_to_match_value(params);
 
-		return r;
-	}
-	return NULL;
+	return bsearch((void *)pval, table, num, sizeof(table[0]), match_reg);
 }
 
 static int emulate_cp15(struct kvm_vcpu *vcpu,
@@ -645,6 +659,9 @@ static struct coproc_reg invariant_cp15[] = {
 	{ CRn( 0), CRm( 0), Op1( 0), Op2( 3), is32, NULL, get_TLBTR },
 	{ CRn( 0), CRm( 0), Op1( 0), Op2( 6), is32, NULL, get_REVIDR },
 
+	{ CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR },
+	{ CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR },
+
 	{ CRn( 0), CRm( 1), Op1( 0), Op2( 0), is32, NULL, get_ID_PFR0 },
 	{ CRn( 0), CRm( 1), Op1( 0), Op2( 1), is32, NULL, get_ID_PFR1 },
 	{ CRn( 0), CRm( 1), Op1( 0), Op2( 2), is32, NULL, get_ID_DFR0 },
@@ -660,9 +677,6 @@ static struct coproc_reg invariant_cp15[] = {
 	{ CRn( 0), CRm( 2), Op1( 0), Op2( 3), is32, NULL, get_ID_ISAR3 },
 	{ CRn( 0), CRm( 2), Op1( 0), Op2( 4), is32, NULL, get_ID_ISAR4 },
 	{ CRn( 0), CRm( 2), Op1( 0), Op2( 5), is32, NULL, get_ID_ISAR5 },
-
-	{ CRn( 0), CRm( 0), Op1( 1), Op2( 1), is32, NULL, get_CLIDR },
-	{ CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR },
 };
 
 /*
@@ -901,7 +915,7 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 	if (vfpid < num_fp_regs()) {
 		if (KVM_REG_SIZE(id) != 8)
 			return -ENOENT;
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpregs[vfpid],
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpregs[vfpid],
 				   id);
 	}
 
@@ -911,13 +925,13 @@ static int vfp_get_reg(const struct kvm_vcpu *vcpu, u64 id, void __user *uaddr)
 
 	switch (vfpid) {
 	case KVM_REG_ARM_VFP_FPEXC:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpexc, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpexc, id);
 	case KVM_REG_ARM_VFP_FPSCR:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpscr, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpscr, id);
 	case KVM_REG_ARM_VFP_FPINST:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst, id);
 	case KVM_REG_ARM_VFP_FPINST2:
-		return reg_to_user(uaddr, &vcpu->arch.vfp_guest.fpinst2, id);
+		return reg_to_user(uaddr, &vcpu->arch.ctxt.vfp.fpinst2, id);
 	case KVM_REG_ARM_VFP_MVFR0:
 		val = fmrx(MVFR0);
 		return reg_to_user(uaddr, &val, id);
@@ -945,7 +959,7 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
 	if (vfpid < num_fp_regs()) {
 		if (KVM_REG_SIZE(id) != 8)
 			return -ENOENT;
-		return reg_from_user(&vcpu->arch.vfp_guest.fpregs[vfpid],
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpregs[vfpid],
 				     uaddr, id);
 	}
 
@@ -955,13 +969,13 @@ static int vfp_set_reg(struct kvm_vcpu *vcpu, u64 id, const void __user *uaddr)
 
 	switch (vfpid) {
 	case KVM_REG_ARM_VFP_FPEXC:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpexc, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpexc, uaddr, id);
 	case KVM_REG_ARM_VFP_FPSCR:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpscr, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpscr, uaddr, id);
 	case KVM_REG_ARM_VFP_FPINST:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpinst, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst, uaddr, id);
 	case KVM_REG_ARM_VFP_FPINST2:
-		return reg_from_user(&vcpu->arch.vfp_guest.fpinst2, uaddr, id);
+		return reg_from_user(&vcpu->arch.ctxt.vfp.fpinst2, uaddr, id);
 	/* These are invariant. */
 	case KVM_REG_ARM_VFP_MVFR0:
 		if (reg_from_user(&val, uaddr, id))
@@ -1030,7 +1044,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		val = vcpu_cp15_reg64_get(vcpu, r);
 		ret = reg_to_user(uaddr, &val, reg->id);
 	} else if (KVM_REG_SIZE(reg->id) == 4) {
-		ret = reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id);
+		ret = reg_to_user(uaddr, &vcpu_cp15(vcpu, r->reg), reg->id);
 	}
 
 	return ret;
@@ -1060,7 +1074,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		if (!ret)
 			vcpu_cp15_reg64_set(vcpu, r, val);
 	} else if (KVM_REG_SIZE(reg->id) == 4) {
-		ret = reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id);
+		ret = reg_from_user(&vcpu_cp15(vcpu, r->reg), uaddr, reg->id);
 	}
 
 	return ret;
@@ -1096,7 +1110,7 @@ static int write_demux_regids(u64 __user *uindices)
 static u64 cp15_to_index(const struct coproc_reg *reg)
 {
 	u64 val = KVM_REG_ARM | (15 << KVM_REG_ARM_COPROC_SHIFT);
-	if (reg->is_64) {
+	if (reg->is_64bit) {
 		val |= KVM_REG_SIZE_U64;
 		val |= (reg->Op1 << KVM_REG_ARM_OPC1_SHIFT);
 		/*
@@ -1210,8 +1224,8 @@ void kvm_coproc_table_init(void)
 	unsigned int i;
 
 	/* Make sure tables are unique and in order. */
-	for (i = 1; i < ARRAY_SIZE(cp15_regs); i++)
-		BUG_ON(cmp_reg(&cp15_regs[i-1], &cp15_regs[i]) >= 0);
+	BUG_ON(check_reg_table(cp15_regs, ARRAY_SIZE(cp15_regs)));
+	BUG_ON(check_reg_table(invariant_cp15, ARRAY_SIZE(invariant_cp15)));
 
 	/* We abuse the reset function to overwrite the table itself. */
 	for (i = 0; i < ARRAY_SIZE(invariant_cp15); i++)
@@ -1248,7 +1262,7 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu)
 	const struct coproc_reg *table;
 
 	/* Catch someone adding a register without putting in reset entry. */
-	memset(vcpu->arch.cp15, 0x42, sizeof(vcpu->arch.cp15));
+	memset(vcpu->arch.ctxt.cp15, 0x42, sizeof(vcpu->arch.ctxt.cp15));
 
 	/* Generic chip reset first (so target could override). */
 	reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs));
@@ -1257,6 +1271,6 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu)
 	reset_coproc_regs(vcpu, table, num);
 
 	for (num = 1; num < NR_CP15_REGS; num++)
-		if (vcpu->arch.cp15[num] == 0x42424242)
-			panic("Didn't reset vcpu->arch.cp15[%zi]", num);
+		if (vcpu_cp15(vcpu, num) == 0x42424242)
+			panic("Didn't reset vcpu_cp15(vcpu, %zi)", num);
 }
diff --git a/arch/arm/kvm/coproc.h b/arch/arm/kvm/coproc.h
index 88d24a3a9778..eef1759c2b65 100644
--- a/arch/arm/kvm/coproc.h
+++ b/arch/arm/kvm/coproc.h
@@ -37,7 +37,7 @@ struct coproc_reg {
 	unsigned long Op1;
 	unsigned long Op2;
 
-	bool is_64;
+	bool is_64bit;
 
 	/* Trapped access from guest, if non-NULL. */
 	bool (*access)(struct kvm_vcpu *,
@@ -47,7 +47,7 @@ struct coproc_reg {
 	/* Initialization for vcpu. */
 	void (*reset)(struct kvm_vcpu *, const struct coproc_reg *);
 
-	/* Index into vcpu->arch.cp15[], or 0 if we don't need to save it. */
+	/* Index into vcpu_cp15(vcpu, ...), or 0 if we don't need to save it. */
 	unsigned long reg;
 
 	/* Value (usually reset value) */
@@ -104,25 +104,25 @@ static inline void reset_unknown(struct kvm_vcpu *vcpu,
 				 const struct coproc_reg *r)
 {
 	BUG_ON(!r->reg);
-	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15));
-	vcpu->arch.cp15[r->reg] = 0xdecafbad;
+	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15));
+	vcpu_cp15(vcpu, r->reg) = 0xdecafbad;
 }
 
 static inline void reset_val(struct kvm_vcpu *vcpu, const struct coproc_reg *r)
 {
 	BUG_ON(!r->reg);
-	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.cp15));
-	vcpu->arch.cp15[r->reg] = r->val;
+	BUG_ON(r->reg >= ARRAY_SIZE(vcpu->arch.ctxt.cp15));
+	vcpu_cp15(vcpu, r->reg) = r->val;
 }
 
 static inline void reset_unknown64(struct kvm_vcpu *vcpu,
 				   const struct coproc_reg *r)
 {
 	BUG_ON(!r->reg);
-	BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.cp15));
+	BUG_ON(r->reg + 1 >= ARRAY_SIZE(vcpu->arch.ctxt.cp15));
 
-	vcpu->arch.cp15[r->reg] = 0xdecafbad;
-	vcpu->arch.cp15[r->reg+1] = 0xd0c0ffee;
+	vcpu_cp15(vcpu, r->reg) = 0xdecafbad;
+	vcpu_cp15(vcpu, r->reg+1) = 0xd0c0ffee;
 }
 
 static inline int cmp_reg(const struct coproc_reg *i1,
@@ -141,7 +141,7 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 		return i1->Op1 - i2->Op1;
 	if (i1->Op2 != i2->Op2)
 		return i1->Op2 - i2->Op2;
-	return i2->is_64 - i1->is_64;
+	return i2->is_64bit - i1->is_64bit;
 }
 
 
@@ -150,8 +150,8 @@ static inline int cmp_reg(const struct coproc_reg *i1,
 #define CRm64(_x)       .CRn = _x, .CRm = 0
 #define Op1(_x) 	.Op1 = _x
 #define Op2(_x) 	.Op2 = _x
-#define is64		.is_64 = true
-#define is32		.is_64 = false
+#define is64		.is_64bit = true
+#define is32		.is_64bit = false
 
 bool access_vm_reg(struct kvm_vcpu *vcpu,
 		   const struct coproc_params *p,
diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c
index d6c005283678..a494def3f195 100644
--- a/arch/arm/kvm/emulate.c
+++ b/arch/arm/kvm/emulate.c
@@ -112,7 +112,7 @@ static const unsigned long vcpu_reg_offsets[VCPU_NR_MODES][15] = {
  */
 unsigned long *vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num)
 {
-	unsigned long *reg_array = (unsigned long *)&vcpu->arch.regs;
+	unsigned long *reg_array = (unsigned long *)&vcpu->arch.ctxt.gp_regs;
 	unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK;
 
 	switch (mode) {
@@ -147,15 +147,15 @@ unsigned long *vcpu_spsr(struct kvm_vcpu *vcpu)
 	unsigned long mode = *vcpu_cpsr(vcpu) & MODE_MASK;
 	switch (mode) {
 	case SVC_MODE:
-		return &vcpu->arch.regs.KVM_ARM_SVC_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_SVC_spsr;
 	case ABT_MODE:
-		return &vcpu->arch.regs.KVM_ARM_ABT_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_ABT_spsr;
 	case UND_MODE:
-		return &vcpu->arch.regs.KVM_ARM_UND_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_UND_spsr;
 	case IRQ_MODE:
-		return &vcpu->arch.regs.KVM_ARM_IRQ_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_IRQ_spsr;
 	case FIQ_MODE:
-		return &vcpu->arch.regs.KVM_ARM_FIQ_spsr;
+		return &vcpu->arch.ctxt.gp_regs.KVM_ARM_FIQ_spsr;
 	default:
 		BUG();
 	}
@@ -266,8 +266,8 @@ void kvm_skip_instr(struct kvm_vcpu *vcpu, bool is_wide_instr)
 
 static u32 exc_vector_base(struct kvm_vcpu *vcpu)
 {
-	u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
-	u32 vbar = vcpu->arch.cp15[c12_VBAR];
+	u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR);
+	u32 vbar = vcpu_cp15(vcpu, c12_VBAR);
 
 	if (sctlr & SCTLR_V)
 		return 0xffff0000;
@@ -275,6 +275,40 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu)
 		return vbar;
 }
 
+/*
+ * Switch to an exception mode, updating both CPSR and SPSR. Follow
+ * the logic described in AArch32.EnterMode() from the ARMv8 ARM.
+ */
+static void kvm_update_psr(struct kvm_vcpu *vcpu, unsigned long mode)
+{
+	unsigned long cpsr = *vcpu_cpsr(vcpu);
+	u32 sctlr = vcpu_cp15(vcpu, c1_SCTLR);
+
+	*vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | mode;
+
+	switch (mode) {
+	case FIQ_MODE:
+		*vcpu_cpsr(vcpu) |= PSR_F_BIT;
+		/* Fall through */
+	case ABT_MODE:
+	case IRQ_MODE:
+		*vcpu_cpsr(vcpu) |= PSR_A_BIT;
+		/* Fall through */
+	default:
+		*vcpu_cpsr(vcpu) |= PSR_I_BIT;
+	}
+
+	*vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
+
+	if (sctlr & SCTLR_TE)
+		*vcpu_cpsr(vcpu) |= PSR_T_BIT;
+	if (sctlr & SCTLR_EE)
+		*vcpu_cpsr(vcpu) |= PSR_E_BIT;
+
+	/* Note: These now point to the mode banked copies */
+	*vcpu_spsr(vcpu) = cpsr;
+}
+
 /**
  * kvm_inject_undefined - inject an undefined exception into the guest
  * @vcpu: The VCPU to receive the undefined exception
@@ -286,29 +320,13 @@ static u32 exc_vector_base(struct kvm_vcpu *vcpu)
  */
 void kvm_inject_undefined(struct kvm_vcpu *vcpu)
 {
-	unsigned long new_lr_value;
-	unsigned long new_spsr_value;
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
-	u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
 	bool is_thumb = (cpsr & PSR_T_BIT);
 	u32 vect_offset = 4;
 	u32 return_offset = (is_thumb) ? 2 : 4;
 
-	new_spsr_value = cpsr;
-	new_lr_value = *vcpu_pc(vcpu) - return_offset;
-
-	*vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | UND_MODE;
-	*vcpu_cpsr(vcpu) |= PSR_I_BIT;
-	*vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
-
-	if (sctlr & SCTLR_TE)
-		*vcpu_cpsr(vcpu) |= PSR_T_BIT;
-	if (sctlr & SCTLR_EE)
-		*vcpu_cpsr(vcpu) |= PSR_E_BIT;
-
-	/* Note: These now point to UND banked copies */
-	*vcpu_spsr(vcpu) = cpsr;
-	*vcpu_reg(vcpu, 14) = new_lr_value;
+	kvm_update_psr(vcpu, UND_MODE);
+	*vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) - return_offset;
 
 	/* Branch to exception vector */
 	*vcpu_pc(vcpu) = exc_vector_base(vcpu) + vect_offset;
@@ -320,30 +338,14 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu)
  */
 static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr)
 {
-	unsigned long new_lr_value;
-	unsigned long new_spsr_value;
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
-	u32 sctlr = vcpu->arch.cp15[c1_SCTLR];
 	bool is_thumb = (cpsr & PSR_T_BIT);
 	u32 vect_offset;
 	u32 return_offset = (is_thumb) ? 4 : 0;
 	bool is_lpae;
 
-	new_spsr_value = cpsr;
-	new_lr_value = *vcpu_pc(vcpu) + return_offset;
-
-	*vcpu_cpsr(vcpu) = (cpsr & ~MODE_MASK) | ABT_MODE;
-	*vcpu_cpsr(vcpu) |= PSR_I_BIT | PSR_A_BIT;
-	*vcpu_cpsr(vcpu) &= ~(PSR_IT_MASK | PSR_J_BIT | PSR_E_BIT | PSR_T_BIT);
-
-	if (sctlr & SCTLR_TE)
-		*vcpu_cpsr(vcpu) |= PSR_T_BIT;
-	if (sctlr & SCTLR_EE)
-		*vcpu_cpsr(vcpu) |= PSR_E_BIT;
-
-	/* Note: These now point to ABT banked copies */
-	*vcpu_spsr(vcpu) = cpsr;
-	*vcpu_reg(vcpu, 14) = new_lr_value;
+	kvm_update_psr(vcpu, ABT_MODE);
+	*vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
 
 	if (is_pabt)
 		vect_offset = 12;
@@ -355,22 +357,22 @@ static void inject_abt(struct kvm_vcpu *vcpu, bool is_pabt, unsigned long addr)
 
 	if (is_pabt) {
 		/* Set IFAR and IFSR */
-		vcpu->arch.cp15[c6_IFAR] = addr;
-		is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31);
+		vcpu_cp15(vcpu, c6_IFAR) = addr;
+		is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31);
 		/* Always give debug fault for now - should give guest a clue */
 		if (is_lpae)
-			vcpu->arch.cp15[c5_IFSR] = 1 << 9 | 0x22;
+			vcpu_cp15(vcpu, c5_IFSR) = 1 << 9 | 0x22;
 		else
-			vcpu->arch.cp15[c5_IFSR] = 2;
+			vcpu_cp15(vcpu, c5_IFSR) = 2;
 	} else { /* !iabt */
 		/* Set DFAR and DFSR */
-		vcpu->arch.cp15[c6_DFAR] = addr;
-		is_lpae = (vcpu->arch.cp15[c2_TTBCR] >> 31);
+		vcpu_cp15(vcpu, c6_DFAR) = addr;
+		is_lpae = (vcpu_cp15(vcpu, c2_TTBCR) >> 31);
 		/* Always give debug fault for now - should give guest a clue */
 		if (is_lpae)
-			vcpu->arch.cp15[c5_DFSR] = 1 << 9 | 0x22;
+			vcpu_cp15(vcpu, c5_DFSR) = 1 << 9 | 0x22;
 		else
-			vcpu->arch.cp15[c5_DFSR] = 2;
+			vcpu_cp15(vcpu, c5_DFSR) = 2;
 	}
 
 }
diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c
index 96e935bbc38c..9093ed0f8b2a 100644
--- a/arch/arm/kvm/guest.c
+++ b/arch/arm/kvm/guest.c
@@ -25,7 +25,6 @@
 #include <asm/cputype.h>
 #include <asm/uaccess.h>
 #include <asm/kvm.h>
-#include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
 
@@ -33,6 +32,12 @@
 #define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU }
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
+	VCPU_STAT(hvc_exit_stat),
+	VCPU_STAT(wfe_exit_stat),
+	VCPU_STAT(wfi_exit_stat),
+	VCPU_STAT(mmio_exit_user),
+	VCPU_STAT(mmio_exit_kernel),
+	VCPU_STAT(exits),
 	{ NULL }
 };
 
@@ -49,7 +54,7 @@ static u64 core_reg_offset_from_id(u64 id)
 static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 {
 	u32 __user *uaddr = (u32 __user *)(long)reg->addr;
-	struct kvm_regs *regs = &vcpu->arch.regs;
+	struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs;
 	u64 off;
 
 	if (KVM_REG_SIZE(reg->id) != 4)
@@ -66,7 +71,7 @@ static int get_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 {
 	u32 __user *uaddr = (u32 __user *)(long)reg->addr;
-	struct kvm_regs *regs = &vcpu->arch.regs;
+	struct kvm_regs *regs = &vcpu->arch.ctxt.gp_regs;
 	u64 off, val;
 
 	if (KVM_REG_SIZE(reg->id) != 4)
@@ -155,7 +160,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 static unsigned long num_core_regs(void)
diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c
index 95f12b2ccdcb..3f1ef0dbc899 100644
--- a/arch/arm/kvm/handle_exit.c
+++ b/arch/arm/kvm/handle_exit.c
@@ -42,6 +42,7 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 
 	trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0),
 		      kvm_vcpu_hvc_get_imm(vcpu));
+	vcpu->stat.hvc_exit_stat++;
 
 	ret = kvm_psci_call(vcpu);
 	if (ret < 0) {
@@ -89,9 +90,11 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	if (kvm_vcpu_get_hsr(vcpu) & HSR_WFI_IS_WFE) {
 		trace_kvm_wfx(*vcpu_pc(vcpu), true);
+		vcpu->stat.wfe_exit_stat++;
 		kvm_vcpu_on_spin(vcpu);
 	} else {
 		trace_kvm_wfx(*vcpu_pc(vcpu), false);
+		vcpu->stat.wfi_exit_stat++;
 		kvm_vcpu_block(vcpu);
 	}
 
@@ -144,13 +147,6 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	switch (exception_index) {
 	case ARM_EXCEPTION_IRQ:
 		return 1;
-	case ARM_EXCEPTION_UNDEFINED:
-		kvm_err("Undefined exception in Hyp mode at: %#08lx\n",
-			kvm_vcpu_get_hyp_pc(vcpu));
-		BUG();
-		panic("KVM: Hypervisor undefined exception!\n");
-	case ARM_EXCEPTION_DATA_ABORT:
-	case ARM_EXCEPTION_PREF_ABORT:
 	case ARM_EXCEPTION_HVC:
 		/*
 		 * See ARM ARM B1.14.1: "Hyp traps on instructions
diff --git a/arch/arm/kvm/hyp/Makefile b/arch/arm/kvm/hyp/Makefile
new file mode 100644
index 000000000000..8dfa5f7f9290
--- /dev/null
+++ b/arch/arm/kvm/hyp/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile for Kernel-based Virtual Machine module, HYP part
+#
+
+KVM=../../../../virt/kvm
+
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
+
+obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
+obj-$(CONFIG_KVM_ARM_HOST) += cp15-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += vfp.o
+obj-$(CONFIG_KVM_ARM_HOST) += banked-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += entry.o
+obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
+obj-$(CONFIG_KVM_ARM_HOST) += switch.o
+obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o
diff --git a/arch/arm/kvm/hyp/banked-sr.c b/arch/arm/kvm/hyp/banked-sr.c
new file mode 100644
index 000000000000..111bda8cdebd
--- /dev/null
+++ b/arch/arm/kvm/hyp/banked-sr.c
@@ -0,0 +1,77 @@
+/*
+ * Original code:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_hyp.h>
+
+__asm__(".arch_extension     virt");
+
+void __hyp_text __banked_save_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt->gp_regs.usr_regs.ARM_sp	= read_special(SP_usr);
+	ctxt->gp_regs.usr_regs.ARM_pc	= read_special(ELR_hyp);
+	ctxt->gp_regs.usr_regs.ARM_cpsr	= read_special(SPSR);
+	ctxt->gp_regs.KVM_ARM_SVC_sp	= read_special(SP_svc);
+	ctxt->gp_regs.KVM_ARM_SVC_lr	= read_special(LR_svc);
+	ctxt->gp_regs.KVM_ARM_SVC_spsr	= read_special(SPSR_svc);
+	ctxt->gp_regs.KVM_ARM_ABT_sp	= read_special(SP_abt);
+	ctxt->gp_regs.KVM_ARM_ABT_lr	= read_special(LR_abt);
+	ctxt->gp_regs.KVM_ARM_ABT_spsr	= read_special(SPSR_abt);
+	ctxt->gp_regs.KVM_ARM_UND_sp	= read_special(SP_und);
+	ctxt->gp_regs.KVM_ARM_UND_lr	= read_special(LR_und);
+	ctxt->gp_regs.KVM_ARM_UND_spsr	= read_special(SPSR_und);
+	ctxt->gp_regs.KVM_ARM_IRQ_sp	= read_special(SP_irq);
+	ctxt->gp_regs.KVM_ARM_IRQ_lr	= read_special(LR_irq);
+	ctxt->gp_regs.KVM_ARM_IRQ_spsr	= read_special(SPSR_irq);
+	ctxt->gp_regs.KVM_ARM_FIQ_r8	= read_special(R8_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_r9	= read_special(R9_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_r10	= read_special(R10_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_fp	= read_special(R11_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_ip	= read_special(R12_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_sp	= read_special(SP_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_lr	= read_special(LR_fiq);
+	ctxt->gp_regs.KVM_ARM_FIQ_spsr	= read_special(SPSR_fiq);
+}
+
+void __hyp_text __banked_restore_state(struct kvm_cpu_context *ctxt)
+{
+	write_special(ctxt->gp_regs.usr_regs.ARM_sp,	SP_usr);
+	write_special(ctxt->gp_regs.usr_regs.ARM_pc,	ELR_hyp);
+	write_special(ctxt->gp_regs.usr_regs.ARM_cpsr,	SPSR_cxsf);
+	write_special(ctxt->gp_regs.KVM_ARM_SVC_sp,	SP_svc);
+	write_special(ctxt->gp_regs.KVM_ARM_SVC_lr,	LR_svc);
+	write_special(ctxt->gp_regs.KVM_ARM_SVC_spsr,	SPSR_svc);
+	write_special(ctxt->gp_regs.KVM_ARM_ABT_sp,	SP_abt);
+	write_special(ctxt->gp_regs.KVM_ARM_ABT_lr,	LR_abt);
+	write_special(ctxt->gp_regs.KVM_ARM_ABT_spsr,	SPSR_abt);
+	write_special(ctxt->gp_regs.KVM_ARM_UND_sp,	SP_und);
+	write_special(ctxt->gp_regs.KVM_ARM_UND_lr,	LR_und);
+	write_special(ctxt->gp_regs.KVM_ARM_UND_spsr,	SPSR_und);
+	write_special(ctxt->gp_regs.KVM_ARM_IRQ_sp,	SP_irq);
+	write_special(ctxt->gp_regs.KVM_ARM_IRQ_lr,	LR_irq);
+	write_special(ctxt->gp_regs.KVM_ARM_IRQ_spsr,	SPSR_irq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_r8,	R8_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_r9,	R9_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_r10,	R10_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_fp,	R11_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_ip,	R12_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_sp,	SP_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_lr,	LR_fiq);
+	write_special(ctxt->gp_regs.KVM_ARM_FIQ_spsr,	SPSR_fiq);
+}
diff --git a/arch/arm/kvm/hyp/cp15-sr.c b/arch/arm/kvm/hyp/cp15-sr.c
new file mode 100644
index 000000000000..c4782812714c
--- /dev/null
+++ b/arch/arm/kvm/hyp/cp15-sr.c
@@ -0,0 +1,84 @@
+/*
+ * Original code:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_hyp.h>
+
+static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx)
+{
+	return (u64 *)(ctxt->cp15 + idx);
+}
+
+void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt->cp15[c0_MPIDR]		= read_sysreg(VMPIDR);
+	ctxt->cp15[c0_CSSELR]		= read_sysreg(CSSELR);
+	ctxt->cp15[c1_SCTLR]		= read_sysreg(SCTLR);
+	ctxt->cp15[c1_CPACR]		= read_sysreg(CPACR);
+	*cp15_64(ctxt, c2_TTBR0)	= read_sysreg(TTBR0);
+	*cp15_64(ctxt, c2_TTBR1)	= read_sysreg(TTBR1);
+	ctxt->cp15[c2_TTBCR]		= read_sysreg(TTBCR);
+	ctxt->cp15[c3_DACR]		= read_sysreg(DACR);
+	ctxt->cp15[c5_DFSR]		= read_sysreg(DFSR);
+	ctxt->cp15[c5_IFSR]		= read_sysreg(IFSR);
+	ctxt->cp15[c5_ADFSR]		= read_sysreg(ADFSR);
+	ctxt->cp15[c5_AIFSR]		= read_sysreg(AIFSR);
+	ctxt->cp15[c6_DFAR]		= read_sysreg(DFAR);
+	ctxt->cp15[c6_IFAR]		= read_sysreg(IFAR);
+	*cp15_64(ctxt, c7_PAR)		= read_sysreg(PAR);
+	ctxt->cp15[c10_PRRR]		= read_sysreg(PRRR);
+	ctxt->cp15[c10_NMRR]		= read_sysreg(NMRR);
+	ctxt->cp15[c10_AMAIR0]		= read_sysreg(AMAIR0);
+	ctxt->cp15[c10_AMAIR1]		= read_sysreg(AMAIR1);
+	ctxt->cp15[c12_VBAR]		= read_sysreg(VBAR);
+	ctxt->cp15[c13_CID]		= read_sysreg(CID);
+	ctxt->cp15[c13_TID_URW]		= read_sysreg(TID_URW);
+	ctxt->cp15[c13_TID_URO]		= read_sysreg(TID_URO);
+	ctxt->cp15[c13_TID_PRIV]	= read_sysreg(TID_PRIV);
+	ctxt->cp15[c14_CNTKCTL]		= read_sysreg(CNTKCTL);
+}
+
+void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt)
+{
+	write_sysreg(ctxt->cp15[c0_MPIDR],	VMPIDR);
+	write_sysreg(ctxt->cp15[c0_CSSELR],	CSSELR);
+	write_sysreg(ctxt->cp15[c1_SCTLR],	SCTLR);
+	write_sysreg(ctxt->cp15[c1_CPACR],	CPACR);
+	write_sysreg(*cp15_64(ctxt, c2_TTBR0),	TTBR0);
+	write_sysreg(*cp15_64(ctxt, c2_TTBR1),	TTBR1);
+	write_sysreg(ctxt->cp15[c2_TTBCR],	TTBCR);
+	write_sysreg(ctxt->cp15[c3_DACR],	DACR);
+	write_sysreg(ctxt->cp15[c5_DFSR],	DFSR);
+	write_sysreg(ctxt->cp15[c5_IFSR],	IFSR);
+	write_sysreg(ctxt->cp15[c5_ADFSR],	ADFSR);
+	write_sysreg(ctxt->cp15[c5_AIFSR],	AIFSR);
+	write_sysreg(ctxt->cp15[c6_DFAR],	DFAR);
+	write_sysreg(ctxt->cp15[c6_IFAR],	IFAR);
+	write_sysreg(*cp15_64(ctxt, c7_PAR),	PAR);
+	write_sysreg(ctxt->cp15[c10_PRRR],	PRRR);
+	write_sysreg(ctxt->cp15[c10_NMRR],	NMRR);
+	write_sysreg(ctxt->cp15[c10_AMAIR0],	AMAIR0);
+	write_sysreg(ctxt->cp15[c10_AMAIR1],	AMAIR1);
+	write_sysreg(ctxt->cp15[c12_VBAR],	VBAR);
+	write_sysreg(ctxt->cp15[c13_CID],	CID);
+	write_sysreg(ctxt->cp15[c13_TID_URW],	TID_URW);
+	write_sysreg(ctxt->cp15[c13_TID_URO],	TID_URO);
+	write_sysreg(ctxt->cp15[c13_TID_PRIV],	TID_PRIV);
+	write_sysreg(ctxt->cp15[c14_CNTKCTL],	CNTKCTL);
+}
diff --git a/arch/arm/kvm/hyp/entry.S b/arch/arm/kvm/hyp/entry.S
new file mode 100644
index 000000000000..21c238871c9e
--- /dev/null
+++ b/arch/arm/kvm/hyp/entry.S
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) 2016 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/kvm_arm.h>
+
+	.arch_extension     virt
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+#define USR_REGS_OFFSET		(CPU_CTXT_GP_REGS + GP_REGS_USR)
+
+/* int __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host) */
+ENTRY(__guest_enter)
+	@ Save host registers
+	add	r1, r1, #(USR_REGS_OFFSET + S_R4)
+	stm	r1!, {r4-r12}
+	str	lr, [r1, #4]	@ Skip SP_usr (already saved)
+
+	@ Restore guest registers
+	add	r0, r0,  #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0)
+	ldr	lr, [r0, #S_LR]
+	ldm	r0, {r0-r12}
+
+	clrex
+	eret
+ENDPROC(__guest_enter)
+
+ENTRY(__guest_exit)
+	/*
+	 * return convention:
+	 * guest r0, r1, r2 saved on the stack
+	 * r0: vcpu pointer
+	 * r1: exception code
+	 */
+
+	add	r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R3)
+	stm	r2!, {r3-r12}
+	str	lr, [r2, #4]
+	add	r2, r0, #(VCPU_GUEST_CTXT + USR_REGS_OFFSET + S_R0)
+	pop	{r3, r4, r5}		@ r0, r1, r2
+	stm	r2, {r3-r5}
+
+	ldr	r0, [r0, #VCPU_HOST_CTXT]
+	add	r0, r0, #(USR_REGS_OFFSET + S_R4)
+	ldm	r0!, {r4-r12}
+	ldr	lr, [r0, #4]
+
+	mov	r0, r1
+	bx	lr
+ENDPROC(__guest_exit)
+
+/*
+ * If VFPv3 support is not available, then we will not switch the VFP
+ * registers; however cp10 and cp11 accesses will still trap and fallback
+ * to the regular coprocessor emulation code, which currently will
+ * inject an undefined exception to the guest.
+ */
+#ifdef CONFIG_VFPv3
+ENTRY(__vfp_guest_restore)
+	push	{r3, r4, lr}
+
+	@ NEON/VFP used.  Turn on VFP access.
+	mrc	p15, 4, r1, c1, c1, 2		@ HCPTR
+	bic	r1, r1, #(HCPTR_TCP(10) | HCPTR_TCP(11))
+	mcr	p15, 4, r1, c1, c1, 2		@ HCPTR
+	isb
+
+	@ Switch VFP/NEON hardware state to the guest's
+	mov	r4, r0
+	ldr	r0, [r0, #VCPU_HOST_CTXT]
+	add	r0, r0, #CPU_CTXT_VFP
+	bl	__vfp_save_state
+	add	r0, r4, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP)
+	bl	__vfp_restore_state
+
+	pop	{r3, r4, lr}
+	pop	{r0, r1, r2}
+	clrex
+	eret
+ENDPROC(__vfp_guest_restore)
+#endif
+
+	.popsection
+
diff --git a/arch/arm/kvm/hyp/hyp-entry.S b/arch/arm/kvm/hyp/hyp-entry.S
new file mode 100644
index 000000000000..78091383a5d9
--- /dev/null
+++ b/arch/arm/kvm/hyp/hyp-entry.S
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+
+	.arch_extension     virt
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+.macro load_vcpu	reg
+	mrc	p15, 4, \reg, c13, c0, 2	@ HTPIDR
+.endm
+
+/********************************************************************
+ * Hypervisor exception vector and handlers
+ *
+ *
+ * The KVM/ARM Hypervisor ABI is defined as follows:
+ *
+ * Entry to Hyp mode from the host kernel will happen _only_ when an HVC
+ * instruction is issued since all traps are disabled when running the host
+ * kernel as per the Hyp-mode initialization at boot time.
+ *
+ * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc
+ * below) when the HVC instruction is called from SVC mode (i.e. a guest or the
+ * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC
+ * instructions are called from within Hyp-mode.
+ *
+ * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
+ *    Switching to Hyp mode is done through a simple HVC #0 instruction. The
+ *    exception vector code will check that the HVC comes from VMID==0.
+ *    - r0 contains a pointer to a HYP function
+ *    - r1, r2, and r3 contain arguments to the above function.
+ *    - The HYP function will be called with its arguments in r0, r1 and r2.
+ *    On HYP function return, we return directly to SVC.
+ *
+ * Note that the above is used to execute code in Hyp-mode from a host-kernel
+ * point of view, and is a different concept from performing a world-switch and
+ * executing guest code SVC mode (with a VMID != 0).
+ */
+
+	.align 5
+__kvm_hyp_vector:
+	.global __kvm_hyp_vector
+
+	@ Hyp-mode exception vector
+	W(b)	hyp_reset
+	W(b)	hyp_undef
+	W(b)	hyp_svc
+	W(b)	hyp_pabt
+	W(b)	hyp_dabt
+	W(b)	hyp_hvc
+	W(b)	hyp_irq
+	W(b)	hyp_fiq
+
+.macro invalid_vector label, cause
+	.align
+\label:	mov	r0, #\cause
+	b	__hyp_panic
+.endm
+
+	invalid_vector	hyp_reset	ARM_EXCEPTION_RESET
+	invalid_vector	hyp_undef	ARM_EXCEPTION_UNDEFINED
+	invalid_vector	hyp_svc		ARM_EXCEPTION_SOFTWARE
+	invalid_vector	hyp_pabt	ARM_EXCEPTION_PREF_ABORT
+	invalid_vector	hyp_dabt	ARM_EXCEPTION_DATA_ABORT
+	invalid_vector	hyp_fiq		ARM_EXCEPTION_FIQ
+
+ENTRY(__hyp_do_panic)
+	mrs	lr, cpsr
+	bic	lr, lr, #MODE_MASK
+	orr	lr, lr, #SVC_MODE
+THUMB(	orr	lr, lr, #PSR_T_BIT	)
+	msr	spsr_cxsf, lr
+	ldr	lr, =panic
+	msr	ELR_hyp, lr
+	ldr	lr, =kvm_call_hyp
+	clrex
+	eret
+ENDPROC(__hyp_do_panic)
+
+hyp_hvc:
+	/*
+	 * Getting here is either because of a trap from a guest,
+	 * or from executing HVC from the host kernel, which means
+	 * "do something in Hyp mode".
+	 */
+	push	{r0, r1, r2}
+
+	@ Check syndrome register
+	mrc	p15, 4, r1, c5, c2, 0	@ HSR
+	lsr	r0, r1, #HSR_EC_SHIFT
+	cmp	r0, #HSR_EC_HVC
+	bne	guest_trap		@ Not HVC instr.
+
+	/*
+	 * Let's check if the HVC came from VMID 0 and allow simple
+	 * switch to Hyp mode
+	 */
+	mrrc    p15, 6, r0, r2, c2
+	lsr     r2, r2, #16
+	and     r2, r2, #0xff
+	cmp     r2, #0
+	bne	guest_trap		@ Guest called HVC
+
+	/*
+	 * Getting here means host called HVC, we shift parameters and branch
+	 * to Hyp function.
+	 */
+	pop	{r0, r1, r2}
+
+	/* Check for __hyp_get_vectors */
+	cmp	r0, #-1
+	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	beq	1f
+
+	push	{lr}
+
+	mov	lr, r0
+	mov	r0, r1
+	mov	r1, r2
+	mov	r2, r3
+
+THUMB(	orr	lr, #1)
+	blx	lr			@ Call the HYP function
+
+	pop	{lr}
+1:	eret
+
+guest_trap:
+	load_vcpu r0			@ Load VCPU pointer to r0
+
+#ifdef CONFIG_VFPv3
+	@ Check for a VFP access
+	lsr	r1, r1, #HSR_EC_SHIFT
+	cmp	r1, #HSR_EC_CP_0_13
+	beq	__vfp_guest_restore
+#endif
+
+	mov	r1, #ARM_EXCEPTION_HVC
+	b	__guest_exit
+
+hyp_irq:
+	push	{r0, r1, r2}
+	mov	r1, #ARM_EXCEPTION_IRQ
+	load_vcpu r0			@ Load VCPU pointer to r0
+	b	__guest_exit
+
+	.ltorg
+
+	.popsection
diff --git a/arch/arm/kvm/hyp/s2-setup.c b/arch/arm/kvm/hyp/s2-setup.c
new file mode 100644
index 000000000000..7be39af2ed6c
--- /dev/null
+++ b/arch/arm/kvm/hyp/s2-setup.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2016 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/types.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+void __hyp_text __init_stage2_translation(void)
+{
+	u64 val;
+
+	val = read_sysreg(VTCR) & ~VTCR_MASK;
+
+	val |= read_sysreg(HTCR) & VTCR_HTCR_SH;
+	val |= KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S;
+
+	write_sysreg(val, VTCR);
+}
diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c
new file mode 100644
index 000000000000..b13caa90cd44
--- /dev/null
+++ b/arch/arm/kvm/hyp/switch.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+__asm__(".arch_extension     virt");
+
+/*
+ * Activate the traps, saving the host's fpexc register before
+ * overwriting it. We'll restore it on VM exit.
+ */
+static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu, u32 *fpexc_host)
+{
+	u32 val;
+
+	/*
+	 * We are about to set HCPTR.TCP10/11 to trap all floating point
+	 * register accesses to HYP, however, the ARM ARM clearly states that
+	 * traps are only taken to HYP if the operation would not otherwise
+	 * trap to SVC.  Therefore, always make sure that for 32-bit guests,
+	 * we set FPEXC.EN to prevent traps to SVC, when setting the TCP bits.
+	 */
+	val = read_sysreg(VFP_FPEXC);
+	*fpexc_host = val;
+	if (!(val & FPEXC_EN)) {
+		write_sysreg(val | FPEXC_EN, VFP_FPEXC);
+		isb();
+	}
+
+	write_sysreg(vcpu->arch.hcr | vcpu->arch.irq_lines, HCR);
+	/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
+	write_sysreg(HSTR_T(15), HSTR);
+	write_sysreg(HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11), HCPTR);
+	val = read_sysreg(HDCR);
+	write_sysreg(val | HDCR_TPM | HDCR_TPMCR, HDCR);
+}
+
+static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
+{
+	u32 val;
+
+	write_sysreg(0, HCR);
+	write_sysreg(0, HSTR);
+	val = read_sysreg(HDCR);
+	write_sysreg(val & ~(HDCR_TPM | HDCR_TPMCR), HDCR);
+	write_sysreg(0, HCPTR);
+}
+
+static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
+	write_sysreg(kvm->arch.vttbr, VTTBR);
+	write_sysreg(vcpu->arch.midr, VPIDR);
+}
+
+static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu)
+{
+	write_sysreg(0, VTTBR);
+	write_sysreg(read_sysreg(MIDR), VPIDR);
+}
+
+static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu)
+{
+	__vgic_v2_save_state(vcpu);
+}
+
+static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu)
+{
+	__vgic_v2_restore_state(vcpu);
+}
+
+static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
+{
+	u32 hsr = read_sysreg(HSR);
+	u8 ec = hsr >> HSR_EC_SHIFT;
+	u32 hpfar, far;
+
+	vcpu->arch.fault.hsr = hsr;
+
+	if (ec == HSR_EC_IABT)
+		far = read_sysreg(HIFAR);
+	else if (ec == HSR_EC_DABT)
+		far = read_sysreg(HDFAR);
+	else
+		return true;
+
+	/*
+	 * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode:
+	 *
+	 * Abort on the stage 2 translation for a memory access from a
+	 * Non-secure PL1 or PL0 mode:
+	 *
+	 * For any Access flag fault or Translation fault, and also for any
+	 * Permission fault on the stage 2 translation of a memory access
+	 * made as part of a translation table walk for a stage 1 translation,
+	 * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR
+	 * is UNKNOWN.
+	 */
+	if (!(hsr & HSR_DABT_S1PTW) && (hsr & HSR_FSC_TYPE) == FSC_PERM) {
+		u64 par, tmp;
+
+		par = read_sysreg(PAR);
+		write_sysreg(far, ATS1CPR);
+		isb();
+
+		tmp = read_sysreg(PAR);
+		write_sysreg(par, PAR);
+
+		if (unlikely(tmp & 1))
+			return false; /* Translation failed, back to guest */
+
+		hpfar = ((tmp >> 12) & ((1UL << 28) - 1)) << 4;
+	} else {
+		hpfar = read_sysreg(HPFAR);
+	}
+
+	vcpu->arch.fault.hxfar = far;
+	vcpu->arch.fault.hpfar = hpfar;
+	return true;
+}
+
+static int __hyp_text __guest_run(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_cpu_context *guest_ctxt;
+	bool fp_enabled;
+	u64 exit_code;
+	u32 fpexc;
+
+	vcpu = kern_hyp_va(vcpu);
+	write_sysreg(vcpu, HTPIDR);
+
+	host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
+	guest_ctxt = &vcpu->arch.ctxt;
+
+	__sysreg_save_state(host_ctxt);
+	__banked_save_state(host_ctxt);
+
+	__activate_traps(vcpu, &fpexc);
+	__activate_vm(vcpu);
+
+	__vgic_restore_state(vcpu);
+	__timer_restore_state(vcpu);
+
+	__sysreg_restore_state(guest_ctxt);
+	__banked_restore_state(guest_ctxt);
+
+	/* Jump in the fire! */
+again:
+	exit_code = __guest_enter(vcpu, host_ctxt);
+	/* And we're baaack! */
+
+	if (exit_code == ARM_EXCEPTION_HVC && !__populate_fault_info(vcpu))
+		goto again;
+
+	fp_enabled = __vfp_enabled();
+
+	__banked_save_state(guest_ctxt);
+	__sysreg_save_state(guest_ctxt);
+	__timer_save_state(vcpu);
+	__vgic_save_state(vcpu);
+
+	__deactivate_traps(vcpu);
+	__deactivate_vm(vcpu);
+
+	__banked_restore_state(host_ctxt);
+	__sysreg_restore_state(host_ctxt);
+
+	if (fp_enabled) {
+		__vfp_save_state(&guest_ctxt->vfp);
+		__vfp_restore_state(&host_ctxt->vfp);
+	}
+
+	write_sysreg(fpexc, VFP_FPEXC);
+
+	return exit_code;
+}
+
+__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
+
+static const char * const __hyp_panic_string[] = {
+	[ARM_EXCEPTION_RESET]      = "\nHYP panic: RST   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_UNDEFINED]  = "\nHYP panic: UNDEF PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_SOFTWARE]   = "\nHYP panic: SVC   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_PREF_ABORT] = "\nHYP panic: PABRT PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_DATA_ABORT] = "\nHYP panic: DABRT PC:%08x ADDR:%08x",
+	[ARM_EXCEPTION_IRQ]        = "\nHYP panic: IRQ   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_FIQ]        = "\nHYP panic: FIQ   PC:%08x CPSR:%08x",
+	[ARM_EXCEPTION_HVC]        = "\nHYP panic: HVC   PC:%08x CPSR:%08x",
+};
+
+void __hyp_text __noreturn __hyp_panic(int cause)
+{
+	u32 elr = read_special(ELR_hyp);
+	u32 val;
+
+	if (cause == ARM_EXCEPTION_DATA_ABORT)
+		val = read_sysreg(HDFAR);
+	else
+		val = read_special(SPSR);
+
+	if (read_sysreg(VTTBR)) {
+		struct kvm_vcpu *vcpu;
+		struct kvm_cpu_context *host_ctxt;
+
+		vcpu = (struct kvm_vcpu *)read_sysreg(HTPIDR);
+		host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
+		__deactivate_traps(vcpu);
+		__deactivate_vm(vcpu);
+		__sysreg_restore_state(host_ctxt);
+	}
+
+	/* Call panic for real */
+	__hyp_do_panic(__hyp_panic_string[cause], elr, val);
+
+	unreachable();
+}
diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c
new file mode 100644
index 000000000000..a2636001e616
--- /dev/null
+++ b/arch/arm/kvm/hyp/tlb.c
@@ -0,0 +1,70 @@
+/*
+ * Original code:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * Mostly rewritten in C by Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_hyp.h>
+
+/**
+ * Flush per-VMID TLBs
+ *
+ * __kvm_tlb_flush_vmid(struct kvm *kvm);
+ *
+ * We rely on the hardware to broadcast the TLB invalidation to all CPUs
+ * inside the inner-shareable domain (which is the case for all v7
+ * implementations).  If we come across a non-IS SMP implementation, we'll
+ * have to use an IPI based mechanism. Until then, we stick to the simple
+ * hardware assisted version.
+ *
+ * As v7 does not support flushing per IPA, just nuke the whole TLB
+ * instead, ignoring the ipa value.
+ */
+static void __hyp_text __tlb_flush_vmid(struct kvm *kvm)
+{
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	kvm = kern_hyp_va(kvm);
+	write_sysreg(kvm->arch.vttbr, VTTBR);
+	isb();
+
+	write_sysreg(0, TLBIALLIS);
+	dsb(ish);
+	isb();
+
+	write_sysreg(0, VTTBR);
+}
+
+__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm);
+
+static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
+{
+	__tlb_flush_vmid(kvm);
+}
+
+__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm,
+							    phys_addr_t ipa);
+
+static void __hyp_text __tlb_flush_vm_context(void)
+{
+	write_sysreg(0, TLBIALLNSNHIS);
+	write_sysreg(0, ICIALLUIS);
+	dsb(ish);
+}
+
+__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void);
diff --git a/arch/arm/kvm/hyp/vfp.S b/arch/arm/kvm/hyp/vfp.S
new file mode 100644
index 000000000000..7c297e87eb8b
--- /dev/null
+++ b/arch/arm/kvm/hyp/vfp.S
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <asm/vfpmacros.h>
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+/* void __vfp_save_state(struct vfp_hard_struct *vfp); */
+ENTRY(__vfp_save_state)
+	push	{r4, r5}
+	VFPFMRX	r1, FPEXC
+
+	@ Make sure *really* VFP is enabled so we can touch the registers.
+	orr	r5, r1, #FPEXC_EN
+	tst	r5, #FPEXC_EX		@ Check for VFP Subarchitecture
+	bic	r5, r5, #FPEXC_EX	@ FPEXC_EX disable
+	VFPFMXR	FPEXC, r5
+	isb
+
+	VFPFMRX	r2, FPSCR
+	beq	1f
+
+	@ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
+	@ we only need to save them if FPEXC_EX is set.
+	VFPFMRX r3, FPINST
+	tst	r5, #FPEXC_FP2V
+	VFPFMRX r4, FPINST2, ne		@ vmrsne
+1:
+	VFPFSTMIA r0, r5		@ Save VFP registers
+	stm	r0, {r1-r4}		@ Save FPEXC, FPSCR, FPINST, FPINST2
+	pop	{r4, r5}
+	bx	lr
+ENDPROC(__vfp_save_state)
+
+/* void __vfp_restore_state(struct vfp_hard_struct *vfp);
+ * Assume FPEXC_EN is on and FPEXC_EX is off */
+ENTRY(__vfp_restore_state)
+	VFPFLDMIA r0, r1		@ Load VFP registers
+	ldm	r0, {r0-r3}		@ Load FPEXC, FPSCR, FPINST, FPINST2
+
+	VFPFMXR FPSCR, r1
+	tst	r0, #FPEXC_EX		@ Check for VFP Subarchitecture
+	beq	1f
+	VFPFMXR FPINST, r2
+	tst	r0, #FPEXC_FP2V
+	VFPFMXR FPINST2, r3, ne
+1:
+	VFPFMXR FPEXC, r0		@ FPEXC	(last, in case !EN)
+	bx	lr
+ENDPROC(__vfp_restore_state)
+
+	.popsection
diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S
index 3988e72d16ff..1f9ae17476f9 100644
--- a/arch/arm/kvm/init.S
+++ b/arch/arm/kvm/init.S
@@ -84,14 +84,6 @@ __do_hyp_init:
 	orr	r0, r0, r1
 	mcr	p15, 4, r0, c2, c0, 2	@ HTCR
 
-	mrc	p15, 4, r1, c2, c1, 2	@ VTCR
-	ldr	r2, =VTCR_MASK
-	bic	r1, r1, r2
-	bic	r0, r0, #(~VTCR_HTCR_SH)	@ clear non-reusable HTCR bits
-	orr	r1, r0, r1
-	orr	r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S)
-	mcr	p15, 4, r1, c2, c1, 2	@ VTCR
-
 	@ Use the same memory attributes for hyp. accesses as the kernel
 	@ (copy MAIRx ro HMAIRx).
 	mrc	p15, 0, r0, c10, c2, 0
diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S
index 900ef6dd8f72..b1bd316f14c0 100644
--- a/arch/arm/kvm/interrupts.S
+++ b/arch/arm/kvm/interrupts.S
@@ -17,211 +17,14 @@
  */
 
 #include <linux/linkage.h>
-#include <linux/const.h>
-#include <asm/unified.h>
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-#include <asm/kvm_asm.h>
-#include <asm/kvm_arm.h>
-#include <asm/vfpmacros.h>
-#include "interrupts_head.S"
 
 	.text
 
-__kvm_hyp_code_start:
-	.globl __kvm_hyp_code_start
-
-/********************************************************************
- * Flush per-VMID TLBs
- *
- * void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
- *
- * We rely on the hardware to broadcast the TLB invalidation to all CPUs
- * inside the inner-shareable domain (which is the case for all v7
- * implementations).  If we come across a non-IS SMP implementation, we'll
- * have to use an IPI based mechanism. Until then, we stick to the simple
- * hardware assisted version.
- *
- * As v7 does not support flushing per IPA, just nuke the whole TLB
- * instead, ignoring the ipa value.
- */
-ENTRY(__kvm_tlb_flush_vmid_ipa)
-	push	{r2, r3}
-
-	dsb	ishst
-	add	r0, r0, #KVM_VTTBR
-	ldrd	r2, r3, [r0]
-	mcrr	p15, 6, rr_lo_hi(r2, r3), c2	@ Write VTTBR
-	isb
-	mcr     p15, 0, r0, c8, c3, 0	@ TLBIALLIS (rt ignored)
-	dsb	ish
-	isb
-	mov	r2, #0
-	mov	r3, #0
-	mcrr	p15, 6, r2, r3, c2	@ Back to VMID #0
-	isb				@ Not necessary if followed by eret
-
-	pop	{r2, r3}
-	bx	lr
-ENDPROC(__kvm_tlb_flush_vmid_ipa)
-
-/**
- * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs
- *
- * Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address
- * parameter
- */
-
-ENTRY(__kvm_tlb_flush_vmid)
-	b	__kvm_tlb_flush_vmid_ipa
-ENDPROC(__kvm_tlb_flush_vmid)
-
-/********************************************************************
- * Flush TLBs and instruction caches of all CPUs inside the inner-shareable
- * domain, for all VMIDs
- *
- * void __kvm_flush_vm_context(void);
- */
-ENTRY(__kvm_flush_vm_context)
-	mov	r0, #0			@ rn parameter for c15 flushes is SBZ
-
-	/* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */
-	mcr     p15, 4, r0, c8, c3, 4
-	/* Invalidate instruction caches Inner Shareable (ICIALLUIS) */
-	mcr     p15, 0, r0, c7, c1, 0
-	dsb	ish
-	isb				@ Not necessary if followed by eret
-
-	bx	lr
-ENDPROC(__kvm_flush_vm_context)
-
-
-/********************************************************************
- *  Hypervisor world-switch code
- *
- *
- * int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
- */
-ENTRY(__kvm_vcpu_run)
-	@ Save the vcpu pointer
-	mcr	p15, 4, vcpu, c13, c0, 2	@ HTPIDR
-
-	save_host_regs
-
-	restore_vgic_state
-	restore_timer_state
-
-	@ Store hardware CP15 state and load guest state
-	read_cp15_state store_to_vcpu = 0
-	write_cp15_state read_from_vcpu = 1
-
-	@ If the host kernel has not been configured with VFPv3 support,
-	@ then it is safer if we deny guests from using it as well.
-#ifdef CONFIG_VFPv3
-	@ Set FPEXC_EN so the guest doesn't trap floating point instructions
-	VFPFMRX r2, FPEXC		@ VMRS
-	push	{r2}
-	orr	r2, r2, #FPEXC_EN
-	VFPFMXR FPEXC, r2		@ VMSR
-#endif
-
-	@ Configure Hyp-role
-	configure_hyp_role vmentry
-
-	@ Trap coprocessor CRx accesses
-	set_hstr vmentry
-	set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
-	set_hdcr vmentry
-
-	@ Write configured ID register into MIDR alias
-	ldr	r1, [vcpu, #VCPU_MIDR]
-	mcr	p15, 4, r1, c0, c0, 0
-
-	@ Write guest view of MPIDR into VMPIDR
-	ldr	r1, [vcpu, #CP15_OFFSET(c0_MPIDR)]
-	mcr	p15, 4, r1, c0, c0, 5
-
-	@ Set up guest memory translation
-	ldr	r1, [vcpu, #VCPU_KVM]
-	add	r1, r1, #KVM_VTTBR
-	ldrd	r2, r3, [r1]
-	mcrr	p15, 6, rr_lo_hi(r2, r3), c2	@ Write VTTBR
-
-	@ We're all done, just restore the GPRs and go to the guest
-	restore_guest_regs
-	clrex				@ Clear exclusive monitor
-	eret
-
-__kvm_vcpu_return:
-	/*
-	 * return convention:
-	 * guest r0, r1, r2 saved on the stack
-	 * r0: vcpu pointer
-	 * r1: exception code
-	 */
-	save_guest_regs
-
-	@ Set VMID == 0
-	mov	r2, #0
-	mov	r3, #0
-	mcrr	p15, 6, r2, r3, c2	@ Write VTTBR
-
-	@ Don't trap coprocessor accesses for host kernel
-	set_hstr vmexit
-	set_hdcr vmexit
-	set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore
-
-#ifdef CONFIG_VFPv3
-	@ Switch VFP/NEON hardware state to the host's
-	add	r7, vcpu, #VCPU_VFP_GUEST
-	store_vfp_state r7
-	add	r7, vcpu, #VCPU_VFP_HOST
-	ldr	r7, [r7]
-	restore_vfp_state r7
-
-after_vfp_restore:
-	@ Restore FPEXC_EN which we clobbered on entry
-	pop	{r2}
-	VFPFMXR FPEXC, r2
-#else
-after_vfp_restore:
-#endif
-
-	@ Reset Hyp-role
-	configure_hyp_role vmexit
-
-	@ Let host read hardware MIDR
-	mrc	p15, 0, r2, c0, c0, 0
-	mcr	p15, 4, r2, c0, c0, 0
-
-	@ Back to hardware MPIDR
-	mrc	p15, 0, r2, c0, c0, 5
-	mcr	p15, 4, r2, c0, c0, 5
-
-	@ Store guest CP15 state and restore host state
-	read_cp15_state store_to_vcpu = 1
-	write_cp15_state read_from_vcpu = 0
-
-	save_timer_state
-	save_vgic_state
-
-	restore_host_regs
-	clrex				@ Clear exclusive monitor
-#ifndef CONFIG_CPU_ENDIAN_BE8
-	mov	r0, r1			@ Return the return code
-	mov	r1, #0			@ Clear upper bits in return value
-#else
-	@ r1 already has return code
-	mov	r0, #0			@ Clear upper bits in return value
-#endif /* CONFIG_CPU_ENDIAN_BE8 */
-	bx	lr			@ return to IOCTL
-
 /********************************************************************
  *  Call function in Hyp mode
  *
  *
- * u64 kvm_call_hyp(void *hypfn, ...);
+ * unsigned long kvm_call_hyp(void *hypfn, ...);
  *
  * This is not really a variadic function in the classic C-way and care must
  * be taken when calling this to ensure parameters are passed in registers
@@ -232,7 +35,7 @@ after_vfp_restore:
  * passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the
  * function pointer can be passed).  The function being called must be mapped
  * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c).  Return values are
- * passed in r0 and r1.
+ * passed in r0 (strictly 32bit).
  *
  * A function pointer with a value of 0xffffffff has a special meaning,
  * and is used to implement __hyp_get_vectors in the same way as in
@@ -246,281 +49,4 @@ after_vfp_restore:
 ENTRY(kvm_call_hyp)
 	hvc	#0
 	bx	lr
-
-/********************************************************************
- * Hypervisor exception vector and handlers
- *
- *
- * The KVM/ARM Hypervisor ABI is defined as follows:
- *
- * Entry to Hyp mode from the host kernel will happen _only_ when an HVC
- * instruction is issued since all traps are disabled when running the host
- * kernel as per the Hyp-mode initialization at boot time.
- *
- * HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc
- * below) when the HVC instruction is called from SVC mode (i.e. a guest or the
- * host kernel) and they cause a trap to the vector page + offset 0x8 when HVC
- * instructions are called from within Hyp-mode.
- *
- * Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
- *    Switching to Hyp mode is done through a simple HVC #0 instruction. The
- *    exception vector code will check that the HVC comes from VMID==0 and if
- *    so will push the necessary state (SPSR, lr_usr) on the Hyp stack.
- *    - r0 contains a pointer to a HYP function
- *    - r1, r2, and r3 contain arguments to the above function.
- *    - The HYP function will be called with its arguments in r0, r1 and r2.
- *    On HYP function return, we return directly to SVC.
- *
- * Note that the above is used to execute code in Hyp-mode from a host-kernel
- * point of view, and is a different concept from performing a world-switch and
- * executing guest code SVC mode (with a VMID != 0).
- */
-
-/* Handle undef, svc, pabt, or dabt by crashing with a user notice */
-.macro bad_exception exception_code, panic_str
-	push	{r0-r2}
-	mrrc	p15, 6, r0, r1, c2	@ Read VTTBR
-	lsr	r1, r1, #16
-	ands	r1, r1, #0xff
-	beq	99f
-
-	load_vcpu			@ Load VCPU pointer
-	.if \exception_code == ARM_EXCEPTION_DATA_ABORT
-	mrc	p15, 4, r2, c5, c2, 0	@ HSR
-	mrc	p15, 4, r1, c6, c0, 0	@ HDFAR
-	str	r2, [vcpu, #VCPU_HSR]
-	str	r1, [vcpu, #VCPU_HxFAR]
-	.endif
-	.if \exception_code == ARM_EXCEPTION_PREF_ABORT
-	mrc	p15, 4, r2, c5, c2, 0	@ HSR
-	mrc	p15, 4, r1, c6, c0, 2	@ HIFAR
-	str	r2, [vcpu, #VCPU_HSR]
-	str	r1, [vcpu, #VCPU_HxFAR]
-	.endif
-	mov	r1, #\exception_code
-	b	__kvm_vcpu_return
-
-	@ We were in the host already. Let's craft a panic-ing return to SVC.
-99:	mrs	r2, cpsr
-	bic	r2, r2, #MODE_MASK
-	orr	r2, r2, #SVC_MODE
-THUMB(	orr	r2, r2, #PSR_T_BIT	)
-	msr	spsr_cxsf, r2
-	mrs	r1, ELR_hyp
-	ldr	r2, =panic
-	msr	ELR_hyp, r2
-	ldr	r0, =\panic_str
-	clrex				@ Clear exclusive monitor
-	eret
-.endm
-
-	.text
-
-	.align 5
-__kvm_hyp_vector:
-	.globl __kvm_hyp_vector
-
-	@ Hyp-mode exception vector
-	W(b)	hyp_reset
-	W(b)	hyp_undef
-	W(b)	hyp_svc
-	W(b)	hyp_pabt
-	W(b)	hyp_dabt
-	W(b)	hyp_hvc
-	W(b)	hyp_irq
-	W(b)	hyp_fiq
-
-	.align
-hyp_reset:
-	b	hyp_reset
-
-	.align
-hyp_undef:
-	bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str
-
-	.align
-hyp_svc:
-	bad_exception ARM_EXCEPTION_HVC, svc_die_str
-
-	.align
-hyp_pabt:
-	bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str
-
-	.align
-hyp_dabt:
-	bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str
-
-	.align
-hyp_hvc:
-	/*
-	 * Getting here is either becuase of a trap from a guest or from calling
-	 * HVC from the host kernel, which means "switch to Hyp mode".
-	 */
-	push	{r0, r1, r2}
-
-	@ Check syndrome register
-	mrc	p15, 4, r1, c5, c2, 0	@ HSR
-	lsr	r0, r1, #HSR_EC_SHIFT
-	cmp	r0, #HSR_EC_HVC
-	bne	guest_trap		@ Not HVC instr.
-
-	/*
-	 * Let's check if the HVC came from VMID 0 and allow simple
-	 * switch to Hyp mode
-	 */
-	mrrc    p15, 6, r0, r2, c2
-	lsr     r2, r2, #16
-	and     r2, r2, #0xff
-	cmp     r2, #0
-	bne	guest_trap		@ Guest called HVC
-
-	/*
-	 * Getting here means host called HVC, we shift parameters and branch
-	 * to Hyp function.
-	 */
-	pop	{r0, r1, r2}
-
-	/* Check for __hyp_get_vectors */
-	cmp	r0, #-1
-	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
-	beq	1f
-
-	push	{lr}
-	mrs	lr, SPSR
-	push	{lr}
-
-	mov	lr, r0
-	mov	r0, r1
-	mov	r1, r2
-	mov	r2, r3
-
-THUMB(	orr	lr, #1)
-	blx	lr			@ Call the HYP function
-
-	pop	{lr}
-	msr	SPSR_csxf, lr
-	pop	{lr}
-1:	eret
-
-guest_trap:
-	load_vcpu			@ Load VCPU pointer to r0
-	str	r1, [vcpu, #VCPU_HSR]
-
-	@ Check if we need the fault information
-	lsr	r1, r1, #HSR_EC_SHIFT
-#ifdef CONFIG_VFPv3
-	cmp	r1, #HSR_EC_CP_0_13
-	beq	switch_to_guest_vfp
-#endif
-	cmp	r1, #HSR_EC_IABT
-	mrceq	p15, 4, r2, c6, c0, 2	@ HIFAR
-	beq	2f
-	cmp	r1, #HSR_EC_DABT
-	bne	1f
-	mrc	p15, 4, r2, c6, c0, 0	@ HDFAR
-
-2:	str	r2, [vcpu, #VCPU_HxFAR]
-
-	/*
-	 * B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode:
-	 *
-	 * Abort on the stage 2 translation for a memory access from a
-	 * Non-secure PL1 or PL0 mode:
-	 *
-	 * For any Access flag fault or Translation fault, and also for any
-	 * Permission fault on the stage 2 translation of a memory access
-	 * made as part of a translation table walk for a stage 1 translation,
-	 * the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR
-	 * is UNKNOWN.
-	 */
-
-	/* Check for permission fault, and S1PTW */
-	mrc	p15, 4, r1, c5, c2, 0	@ HSR
-	and	r0, r1, #HSR_FSC_TYPE
-	cmp	r0, #FSC_PERM
-	tsteq	r1, #(1 << 7)		@ S1PTW
-	mrcne	p15, 4, r2, c6, c0, 4	@ HPFAR
-	bne	3f
-
-	/* Preserve PAR */
-	mrrc	p15, 0, r0, r1, c7	@ PAR
-	push	{r0, r1}
-
-	/* Resolve IPA using the xFAR */
-	mcr	p15, 0, r2, c7, c8, 0	@ ATS1CPR
-	isb
-	mrrc	p15, 0, r0, r1, c7	@ PAR
-	tst	r0, #1
-	bne	4f			@ Failed translation
-	ubfx	r2, r0, #12, #20
-	lsl	r2, r2, #4
-	orr	r2, r2, r1, lsl #24
-
-	/* Restore PAR */
-	pop	{r0, r1}
-	mcrr	p15, 0, r0, r1, c7	@ PAR
-
-3:	load_vcpu			@ Load VCPU pointer to r0
-	str	r2, [r0, #VCPU_HPFAR]
-
-1:	mov	r1, #ARM_EXCEPTION_HVC
-	b	__kvm_vcpu_return
-
-4:	pop	{r0, r1}		@ Failed translation, return to guest
-	mcrr	p15, 0, r0, r1, c7	@ PAR
-	clrex
-	pop	{r0, r1, r2}
-	eret
-
-/*
- * If VFPv3 support is not available, then we will not switch the VFP
- * registers; however cp10 and cp11 accesses will still trap and fallback
- * to the regular coprocessor emulation code, which currently will
- * inject an undefined exception to the guest.
- */
-#ifdef CONFIG_VFPv3
-switch_to_guest_vfp:
-	push	{r3-r7}
-
-	@ NEON/VFP used.  Turn on VFP access.
-	set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11))
-
-	@ Switch VFP/NEON hardware state to the guest's
-	add	r7, r0, #VCPU_VFP_HOST
-	ldr	r7, [r7]
-	store_vfp_state r7
-	add	r7, r0, #VCPU_VFP_GUEST
-	restore_vfp_state r7
-
-	pop	{r3-r7}
-	pop	{r0-r2}
-	clrex
-	eret
-#endif
-
-	.align
-hyp_irq:
-	push	{r0, r1, r2}
-	mov	r1, #ARM_EXCEPTION_IRQ
-	load_vcpu			@ Load VCPU pointer to r0
-	b	__kvm_vcpu_return
-
-	.align
-hyp_fiq:
-	b	hyp_fiq
-
-	.ltorg
-
-__kvm_hyp_code_end:
-	.globl	__kvm_hyp_code_end
-
-	.section ".rodata"
-
-und_die_str:
-	.ascii	"unexpected undefined exception in Hyp mode at: %#08x\n"
-pabt_die_str:
-	.ascii	"unexpected prefetch abort in Hyp mode at: %#08x\n"
-dabt_die_str:
-	.ascii	"unexpected data abort in Hyp mode at: %#08x\n"
-svc_die_str:
-	.ascii	"unexpected HVC/SVC trap in Hyp mode at: %#08x\n"
+ENDPROC(kvm_call_hyp)
diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
deleted file mode 100644
index 51a59504bef4..000000000000
--- a/arch/arm/kvm/interrupts_head.S
+++ /dev/null
@@ -1,648 +0,0 @@
-#include <linux/irqchip/arm-gic.h>
-#include <asm/assembler.h>
-
-#define VCPU_USR_REG(_reg_nr)	(VCPU_USR_REGS + (_reg_nr * 4))
-#define VCPU_USR_SP		(VCPU_USR_REG(13))
-#define VCPU_USR_LR		(VCPU_USR_REG(14))
-#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15 + (_cp15_reg_idx * 4))
-
-/*
- * Many of these macros need to access the VCPU structure, which is always
- * held in r0. These macros should never clobber r1, as it is used to hold the
- * exception code on the return path (except of course the macro that switches
- * all the registers before the final jump to the VM).
- */
-vcpu	.req	r0		@ vcpu pointer always in r0
-
-/* Clobbers {r2-r6} */
-.macro store_vfp_state vfp_base
-	@ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions
-	VFPFMRX	r2, FPEXC
-	@ Make sure VFP is enabled so we can touch the registers.
-	orr	r6, r2, #FPEXC_EN
-	VFPFMXR	FPEXC, r6
-
-	VFPFMRX	r3, FPSCR
-	tst	r2, #FPEXC_EX		@ Check for VFP Subarchitecture
-	beq	1f
-	@ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
-	@ we only need to save them if FPEXC_EX is set.
-	VFPFMRX r4, FPINST
-	tst	r2, #FPEXC_FP2V
-	VFPFMRX r5, FPINST2, ne		@ vmrsne
-	bic	r6, r2, #FPEXC_EX	@ FPEXC_EX disable
-	VFPFMXR	FPEXC, r6
-1:
-	VFPFSTMIA \vfp_base, r6		@ Save VFP registers
-	stm	\vfp_base, {r2-r5}	@ Save FPEXC, FPSCR, FPINST, FPINST2
-.endm
-
-/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */
-.macro restore_vfp_state vfp_base
-	VFPFLDMIA \vfp_base, r6		@ Load VFP registers
-	ldm	\vfp_base, {r2-r5}	@ Load FPEXC, FPSCR, FPINST, FPINST2
-
-	VFPFMXR FPSCR, r3
-	tst	r2, #FPEXC_EX		@ Check for VFP Subarchitecture
-	beq	1f
-	VFPFMXR FPINST, r4
-	tst	r2, #FPEXC_FP2V
-	VFPFMXR FPINST2, r5, ne
-1:
-	VFPFMXR FPEXC, r2	@ FPEXC	(last, in case !EN)
-.endm
-
-/* These are simply for the macros to work - value don't have meaning */
-.equ usr, 0
-.equ svc, 1
-.equ abt, 2
-.equ und, 3
-.equ irq, 4
-.equ fiq, 5
-
-.macro push_host_regs_mode mode
-	mrs	r2, SP_\mode
-	mrs	r3, LR_\mode
-	mrs	r4, SPSR_\mode
-	push	{r2, r3, r4}
-.endm
-
-/*
- * Store all host persistent registers on the stack.
- * Clobbers all registers, in all modes, except r0 and r1.
- */
-.macro save_host_regs
-	/* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */
-	mrs	r2, ELR_hyp
-	push	{r2}
-
-	/* usr regs */
-	push	{r4-r12}	@ r0-r3 are always clobbered
-	mrs	r2, SP_usr
-	mov	r3, lr
-	push	{r2, r3}
-
-	push_host_regs_mode svc
-	push_host_regs_mode abt
-	push_host_regs_mode und
-	push_host_regs_mode irq
-
-	/* fiq regs */
-	mrs	r2, r8_fiq
-	mrs	r3, r9_fiq
-	mrs	r4, r10_fiq
-	mrs	r5, r11_fiq
-	mrs	r6, r12_fiq
-	mrs	r7, SP_fiq
-	mrs	r8, LR_fiq
-	mrs	r9, SPSR_fiq
-	push	{r2-r9}
-.endm
-
-.macro pop_host_regs_mode mode
-	pop	{r2, r3, r4}
-	msr	SP_\mode, r2
-	msr	LR_\mode, r3
-	msr	SPSR_\mode, r4
-.endm
-
-/*
- * Restore all host registers from the stack.
- * Clobbers all registers, in all modes, except r0 and r1.
- */
-.macro restore_host_regs
-	pop	{r2-r9}
-	msr	r8_fiq, r2
-	msr	r9_fiq, r3
-	msr	r10_fiq, r4
-	msr	r11_fiq, r5
-	msr	r12_fiq, r6
-	msr	SP_fiq, r7
-	msr	LR_fiq, r8
-	msr	SPSR_fiq, r9
-
-	pop_host_regs_mode irq
-	pop_host_regs_mode und
-	pop_host_regs_mode abt
-	pop_host_regs_mode svc
-
-	pop	{r2, r3}
-	msr	SP_usr, r2
-	mov	lr, r3
-	pop	{r4-r12}
-
-	pop	{r2}
-	msr	ELR_hyp, r2
-.endm
-
-/*
- * Restore SP, LR and SPSR for a given mode. offset is the offset of
- * this mode's registers from the VCPU base.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r1, r2, r3, r4.
- */
-.macro restore_guest_regs_mode mode, offset
-	add	r1, vcpu, \offset
-	ldm	r1, {r2, r3, r4}
-	msr	SP_\mode, r2
-	msr	LR_\mode, r3
-	msr	SPSR_\mode, r4
-.endm
-
-/*
- * Restore all guest registers from the vcpu struct.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers *all* registers.
- */
-.macro restore_guest_regs
-	restore_guest_regs_mode svc, #VCPU_SVC_REGS
-	restore_guest_regs_mode abt, #VCPU_ABT_REGS
-	restore_guest_regs_mode und, #VCPU_UND_REGS
-	restore_guest_regs_mode irq, #VCPU_IRQ_REGS
-
-	add	r1, vcpu, #VCPU_FIQ_REGS
-	ldm	r1, {r2-r9}
-	msr	r8_fiq, r2
-	msr	r9_fiq, r3
-	msr	r10_fiq, r4
-	msr	r11_fiq, r5
-	msr	r12_fiq, r6
-	msr	SP_fiq, r7
-	msr	LR_fiq, r8
-	msr	SPSR_fiq, r9
-
-	@ Load return state
-	ldr	r2, [vcpu, #VCPU_PC]
-	ldr	r3, [vcpu, #VCPU_CPSR]
-	msr	ELR_hyp, r2
-	msr	SPSR_cxsf, r3
-
-	@ Load user registers
-	ldr	r2, [vcpu, #VCPU_USR_SP]
-	ldr	r3, [vcpu, #VCPU_USR_LR]
-	msr	SP_usr, r2
-	mov	lr, r3
-	add	vcpu, vcpu, #(VCPU_USR_REGS)
-	ldm	vcpu, {r0-r12}
-.endm
-
-/*
- * Save SP, LR and SPSR for a given mode. offset is the offset of
- * this mode's registers from the VCPU base.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2, r3, r4, r5.
- */
-.macro save_guest_regs_mode mode, offset
-	add	r2, vcpu, \offset
-	mrs	r3, SP_\mode
-	mrs	r4, LR_\mode
-	mrs	r5, SPSR_\mode
-	stm	r2, {r3, r4, r5}
-.endm
-
-/*
- * Save all guest registers to the vcpu struct
- * Expects guest's r0, r1, r2 on the stack.
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2, r3, r4, r5.
- */
-.macro save_guest_regs
-	@ Store usr registers
-	add	r2, vcpu, #VCPU_USR_REG(3)
-	stm	r2, {r3-r12}
-	add	r2, vcpu, #VCPU_USR_REG(0)
-	pop	{r3, r4, r5}		@ r0, r1, r2
-	stm	r2, {r3, r4, r5}
-	mrs	r2, SP_usr
-	mov	r3, lr
-	str	r2, [vcpu, #VCPU_USR_SP]
-	str	r3, [vcpu, #VCPU_USR_LR]
-
-	@ Store return state
-	mrs	r2, ELR_hyp
-	mrs	r3, spsr
-	str	r2, [vcpu, #VCPU_PC]
-	str	r3, [vcpu, #VCPU_CPSR]
-
-	@ Store other guest registers
-	save_guest_regs_mode svc, #VCPU_SVC_REGS
-	save_guest_regs_mode abt, #VCPU_ABT_REGS
-	save_guest_regs_mode und, #VCPU_UND_REGS
-	save_guest_regs_mode irq, #VCPU_IRQ_REGS
-.endm
-
-/* Reads cp15 registers from hardware and stores them in memory
- * @store_to_vcpu: If 0, registers are written in-order to the stack,
- * 		   otherwise to the VCPU struct pointed to by vcpup
- *
- * Assumes vcpu pointer in vcpu reg
- *
- * Clobbers r2 - r12
- */
-.macro read_cp15_state store_to_vcpu
-	mrc	p15, 0, r2, c1, c0, 0	@ SCTLR
-	mrc	p15, 0, r3, c1, c0, 2	@ CPACR
-	mrc	p15, 0, r4, c2, c0, 2	@ TTBCR
-	mrc	p15, 0, r5, c3, c0, 0	@ DACR
-	mrrc	p15, 0, r6, r7, c2	@ TTBR 0
-	mrrc	p15, 1, r8, r9, c2	@ TTBR 1
-	mrc	p15, 0, r10, c10, c2, 0	@ PRRR
-	mrc	p15, 0, r11, c10, c2, 1	@ NMRR
-	mrc	p15, 2, r12, c0, c0, 0	@ CSSELR
-
-	.if \store_to_vcpu == 0
-	push	{r2-r12}		@ Push CP15 registers
-	.else
-	str	r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
-	str	r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
-	str	r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
-	str	r5, [vcpu, #CP15_OFFSET(c3_DACR)]
-	add	r2, vcpu, #CP15_OFFSET(c2_TTBR0)
-	strd	r6, r7, [r2]
-	add	r2, vcpu, #CP15_OFFSET(c2_TTBR1)
-	strd	r8, r9, [r2]
-	str	r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
-	str	r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
-	str	r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
-	.endif
-
-	mrc	p15, 0, r2, c13, c0, 1	@ CID
-	mrc	p15, 0, r3, c13, c0, 2	@ TID_URW
-	mrc	p15, 0, r4, c13, c0, 3	@ TID_URO
-	mrc	p15, 0, r5, c13, c0, 4	@ TID_PRIV
-	mrc	p15, 0, r6, c5, c0, 0	@ DFSR
-	mrc	p15, 0, r7, c5, c0, 1	@ IFSR
-	mrc	p15, 0, r8, c5, c1, 0	@ ADFSR
-	mrc	p15, 0, r9, c5, c1, 1	@ AIFSR
-	mrc	p15, 0, r10, c6, c0, 0	@ DFAR
-	mrc	p15, 0, r11, c6, c0, 2	@ IFAR
-	mrc	p15, 0, r12, c12, c0, 0	@ VBAR
-
-	.if \store_to_vcpu == 0
-	push	{r2-r12}		@ Push CP15 registers
-	.else
-	str	r2, [vcpu, #CP15_OFFSET(c13_CID)]
-	str	r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
-	str	r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
-	str	r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
-	str	r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
-	str	r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
-	str	r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
-	str	r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
-	str	r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
-	str	r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
-	str	r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
-	.endif
-
-	mrc	p15, 0, r2, c14, c1, 0	@ CNTKCTL
-	mrrc	p15, 0, r4, r5, c7	@ PAR
-	mrc	p15, 0, r6, c10, c3, 0	@ AMAIR0
-	mrc	p15, 0, r7, c10, c3, 1	@ AMAIR1
-
-	.if \store_to_vcpu == 0
-	push	{r2,r4-r7}
-	.else
-	str	r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
-	add	r12, vcpu, #CP15_OFFSET(c7_PAR)
-	strd	r4, r5, [r12]
-	str	r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
-	str	r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
-	.endif
-.endm
-
-/*
- * Reads cp15 registers from memory and writes them to hardware
- * @read_from_vcpu: If 0, registers are read in-order from the stack,
- *		    otherwise from the VCPU struct pointed to by vcpup
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro write_cp15_state read_from_vcpu
-	.if \read_from_vcpu == 0
-	pop	{r2,r4-r7}
-	.else
-	ldr	r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
-	add	r12, vcpu, #CP15_OFFSET(c7_PAR)
-	ldrd	r4, r5, [r12]
-	ldr	r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
-	ldr	r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
-	.endif
-
-	mcr	p15, 0, r2, c14, c1, 0	@ CNTKCTL
-	mcrr	p15, 0, r4, r5, c7	@ PAR
-	mcr	p15, 0, r6, c10, c3, 0	@ AMAIR0
-	mcr	p15, 0, r7, c10, c3, 1	@ AMAIR1
-
-	.if \read_from_vcpu == 0
-	pop	{r2-r12}
-	.else
-	ldr	r2, [vcpu, #CP15_OFFSET(c13_CID)]
-	ldr	r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
-	ldr	r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
-	ldr	r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
-	ldr	r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
-	ldr	r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
-	ldr	r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
-	ldr	r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
-	ldr	r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
-	ldr	r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
-	ldr	r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
-	.endif
-
-	mcr	p15, 0, r2, c13, c0, 1	@ CID
-	mcr	p15, 0, r3, c13, c0, 2	@ TID_URW
-	mcr	p15, 0, r4, c13, c0, 3	@ TID_URO
-	mcr	p15, 0, r5, c13, c0, 4	@ TID_PRIV
-	mcr	p15, 0, r6, c5, c0, 0	@ DFSR
-	mcr	p15, 0, r7, c5, c0, 1	@ IFSR
-	mcr	p15, 0, r8, c5, c1, 0	@ ADFSR
-	mcr	p15, 0, r9, c5, c1, 1	@ AIFSR
-	mcr	p15, 0, r10, c6, c0, 0	@ DFAR
-	mcr	p15, 0, r11, c6, c0, 2	@ IFAR
-	mcr	p15, 0, r12, c12, c0, 0	@ VBAR
-
-	.if \read_from_vcpu == 0
-	pop	{r2-r12}
-	.else
-	ldr	r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
-	ldr	r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
-	ldr	r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
-	ldr	r5, [vcpu, #CP15_OFFSET(c3_DACR)]
-	add	r12, vcpu, #CP15_OFFSET(c2_TTBR0)
-	ldrd	r6, r7, [r12]
-	add	r12, vcpu, #CP15_OFFSET(c2_TTBR1)
-	ldrd	r8, r9, [r12]
-	ldr	r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
-	ldr	r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
-	ldr	r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
-	.endif
-
-	mcr	p15, 0, r2, c1, c0, 0	@ SCTLR
-	mcr	p15, 0, r3, c1, c0, 2	@ CPACR
-	mcr	p15, 0, r4, c2, c0, 2	@ TTBCR
-	mcr	p15, 0, r5, c3, c0, 0	@ DACR
-	mcrr	p15, 0, r6, r7, c2	@ TTBR 0
-	mcrr	p15, 1, r8, r9, c2	@ TTBR 1
-	mcr	p15, 0, r10, c10, c2, 0	@ PRRR
-	mcr	p15, 0, r11, c10, c2, 1	@ NMRR
-	mcr	p15, 2, r12, c0, c0, 0	@ CSSELR
-.endm
-
-/*
- * Save the VGIC CPU state into memory
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro save_vgic_state
-	/* Get VGIC VCTRL base into r2 */
-	ldr	r2, [vcpu, #VCPU_KVM]
-	ldr	r2, [r2, #KVM_VGIC_VCTRL]
-	cmp	r2, #0
-	beq	2f
-
-	/* Compute the address of struct vgic_cpu */
-	add	r11, vcpu, #VCPU_VGIC_CPU
-
-	/* Save all interesting registers */
-	ldr	r4, [r2, #GICH_VMCR]
-	ldr	r5, [r2, #GICH_MISR]
-	ldr	r6, [r2, #GICH_EISR0]
-	ldr	r7, [r2, #GICH_EISR1]
-	ldr	r8, [r2, #GICH_ELRSR0]
-	ldr	r9, [r2, #GICH_ELRSR1]
-	ldr	r10, [r2, #GICH_APR]
-ARM_BE8(rev	r4, r4	)
-ARM_BE8(rev	r5, r5	)
-ARM_BE8(rev	r6, r6	)
-ARM_BE8(rev	r7, r7	)
-ARM_BE8(rev	r8, r8	)
-ARM_BE8(rev	r9, r9	)
-ARM_BE8(rev	r10, r10	)
-
-	str	r4, [r11, #VGIC_V2_CPU_VMCR]
-	str	r5, [r11, #VGIC_V2_CPU_MISR]
-#ifdef CONFIG_CPU_ENDIAN_BE8
-	str	r6, [r11, #(VGIC_V2_CPU_EISR + 4)]
-	str	r7, [r11, #VGIC_V2_CPU_EISR]
-	str	r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
-	str	r9, [r11, #VGIC_V2_CPU_ELRSR]
-#else
-	str	r6, [r11, #VGIC_V2_CPU_EISR]
-	str	r7, [r11, #(VGIC_V2_CPU_EISR + 4)]
-	str	r8, [r11, #VGIC_V2_CPU_ELRSR]
-	str	r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
-#endif
-	str	r10, [r11, #VGIC_V2_CPU_APR]
-
-	/* Clear GICH_HCR */
-	mov	r5, #0
-	str	r5, [r2, #GICH_HCR]
-
-	/* Save list registers */
-	add	r2, r2, #GICH_LR0
-	add	r3, r11, #VGIC_V2_CPU_LR
-	ldr	r4, [r11, #VGIC_CPU_NR_LR]
-1:	ldr	r6, [r2], #4
-ARM_BE8(rev	r6, r6	)
-	str	r6, [r3], #4
-	subs	r4, r4, #1
-	bne	1b
-2:
-.endm
-
-/*
- * Restore the VGIC CPU state from memory
- *
- * Assumes vcpu pointer in vcpu reg
- */
-.macro restore_vgic_state
-	/* Get VGIC VCTRL base into r2 */
-	ldr	r2, [vcpu, #VCPU_KVM]
-	ldr	r2, [r2, #KVM_VGIC_VCTRL]
-	cmp	r2, #0
-	beq	2f
-
-	/* Compute the address of struct vgic_cpu */
-	add	r11, vcpu, #VCPU_VGIC_CPU
-
-	/* We only restore a minimal set of registers */
-	ldr	r3, [r11, #VGIC_V2_CPU_HCR]
-	ldr	r4, [r11, #VGIC_V2_CPU_VMCR]
-	ldr	r8, [r11, #VGIC_V2_CPU_APR]
-ARM_BE8(rev	r3, r3	)
-ARM_BE8(rev	r4, r4	)
-ARM_BE8(rev	r8, r8	)
-
-	str	r3, [r2, #GICH_HCR]
-	str	r4, [r2, #GICH_VMCR]
-	str	r8, [r2, #GICH_APR]
-
-	/* Restore list registers */
-	add	r2, r2, #GICH_LR0
-	add	r3, r11, #VGIC_V2_CPU_LR
-	ldr	r4, [r11, #VGIC_CPU_NR_LR]
-1:	ldr	r6, [r3], #4
-ARM_BE8(rev	r6, r6  )
-	str	r6, [r2], #4
-	subs	r4, r4, #1
-	bne	1b
-2:
-.endm
-
-#define CNTHCTL_PL1PCTEN	(1 << 0)
-#define CNTHCTL_PL1PCEN		(1 << 1)
-
-/*
- * Save the timer state onto the VCPU and allow physical timer/counter access
- * for the host.
- *
- * Assumes vcpu pointer in vcpu reg
- * Clobbers r2-r5
- */
-.macro save_timer_state
-	ldr	r4, [vcpu, #VCPU_KVM]
-	ldr	r2, [r4, #KVM_TIMER_ENABLED]
-	cmp	r2, #0
-	beq	1f
-
-	mrc	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
-	str	r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
-
-	isb
-
-	mrrc	p15, 3, rr_lo_hi(r2, r3), c14	@ CNTV_CVAL
-	ldr	r4, =VCPU_TIMER_CNTV_CVAL
-	add	r5, vcpu, r4
-	strd	r2, r3, [r5]
-
-	@ Ensure host CNTVCT == CNTPCT
-	mov	r2, #0
-	mcrr	p15, 4, r2, r2, c14	@ CNTVOFF
-
-1:
-	mov	r2, #0			@ Clear ENABLE
-	mcr	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
-
-	@ Allow physical timer/counter access for the host
-	mrc	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-	orr	r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN)
-	mcr	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-.endm
-
-/*
- * Load the timer state from the VCPU and deny physical timer/counter access
- * for the host.
- *
- * Assumes vcpu pointer in vcpu reg
- * Clobbers r2-r5
- */
-.macro restore_timer_state
-	@ Disallow physical timer access for the guest
-	@ Physical counter access is allowed
-	mrc	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-	orr	r2, r2, #CNTHCTL_PL1PCTEN
-	bic	r2, r2, #CNTHCTL_PL1PCEN
-	mcr	p15, 4, r2, c14, c1, 0	@ CNTHCTL
-
-	ldr	r4, [vcpu, #VCPU_KVM]
-	ldr	r2, [r4, #KVM_TIMER_ENABLED]
-	cmp	r2, #0
-	beq	1f
-
-	ldr	r2, [r4, #KVM_TIMER_CNTVOFF]
-	ldr	r3, [r4, #(KVM_TIMER_CNTVOFF + 4)]
-	mcrr	p15, 4, rr_lo_hi(r2, r3), c14	@ CNTVOFF
-
-	ldr	r4, =VCPU_TIMER_CNTV_CVAL
-	add	r5, vcpu, r4
-	ldrd	r2, r3, [r5]
-	mcrr	p15, 3, rr_lo_hi(r2, r3), c14	@ CNTV_CVAL
-	isb
-
-	ldr	r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
-	and	r2, r2, #3
-	mcr	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
-1:
-.endm
-
-.equ vmentry,	0
-.equ vmexit,	1
-
-/* Configures the HSTR (Hyp System Trap Register) on entry/return
- * (hardware reset value is 0) */
-.macro set_hstr operation
-	mrc	p15, 4, r2, c1, c1, 3
-	ldr	r3, =HSTR_T(15)
-	.if \operation == vmentry
-	orr	r2, r2, r3		@ Trap CR{15}
-	.else
-	bic	r2, r2, r3		@ Don't trap any CRx accesses
-	.endif
-	mcr	p15, 4, r2, c1, c1, 3
-.endm
-
-/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
- * (hardware reset value is 0). Keep previous value in r2.
- * An ISB is emited on vmexit/vmtrap, but executed on vmexit only if
- * VFP wasn't already enabled (always executed on vmtrap).
- * If a label is specified with vmexit, it is branched to if VFP wasn't
- * enabled.
- */
-.macro set_hcptr operation, mask, label = none
-	mrc	p15, 4, r2, c1, c1, 2
-	ldr	r3, =\mask
-	.if \operation == vmentry
-	orr	r3, r2, r3		@ Trap coproc-accesses defined in mask
-	.else
-	bic	r3, r2, r3		@ Don't trap defined coproc-accesses
-	.endif
-	mcr	p15, 4, r3, c1, c1, 2
-	.if \operation != vmentry
-	.if \operation == vmexit
-	tst	r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
-	beq	1f
-	.endif
-	isb
-	.if \label != none
-	b	\label
-	.endif
-1:
-	.endif
-.endm
-
-/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return
- * (hardware reset value is 0) */
-.macro set_hdcr operation
-	mrc	p15, 4, r2, c1, c1, 1
-	ldr	r3, =(HDCR_TPM|HDCR_TPMCR)
-	.if \operation == vmentry
-	orr	r2, r2, r3		@ Trap some perfmon accesses
-	.else
-	bic	r2, r2, r3		@ Don't trap any perfmon accesses
-	.endif
-	mcr	p15, 4, r2, c1, c1, 1
-.endm
-
-/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */
-.macro configure_hyp_role operation
-	.if \operation == vmentry
-	ldr	r2, [vcpu, #VCPU_HCR]
-	ldr	r3, [vcpu, #VCPU_IRQ_LINES]
-	orr	r2, r2, r3
-	.else
-	mov	r2, #0
-	.endif
-	mcr	p15, 4, r2, c1, c1, 0	@ HCR
-.endm
-
-.macro load_vcpu
-	mrc	p15, 4, vcpu, c13, c0, 2	@ HTPIDR
-.endm
diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c
index 974b1c606d04..0f6600f05137 100644
--- a/arch/arm/kvm/mmio.c
+++ b/arch/arm/kvm/mmio.c
@@ -115,7 +115,7 @@ int kvm_handle_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		trace_kvm_mmio(KVM_TRACE_MMIO_READ, len, run->mmio.phys_addr,
 			       data);
 		data = vcpu_data_host_to_guest(vcpu, data, len);
-		*vcpu_reg(vcpu, vcpu->arch.mmio_decode.rt) = data;
+		vcpu_set_reg(vcpu, vcpu->arch.mmio_decode.rt, data);
 	}
 
 	return 0;
@@ -186,7 +186,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	rt = vcpu->arch.mmio_decode.rt;
 
 	if (is_write) {
-		data = vcpu_data_guest_to_host(vcpu, *vcpu_reg(vcpu, rt), len);
+		data = vcpu_data_guest_to_host(vcpu, vcpu_get_reg(vcpu, rt),
+					       len);
 
 		trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, len, fault_ipa, data);
 		mmio_write_buf(data_buf, len, data);
@@ -205,12 +206,16 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run,
 	run->mmio.is_write	= is_write;
 	run->mmio.phys_addr	= fault_ipa;
 	run->mmio.len		= len;
-	memcpy(run->mmio.data, data_buf, len);
+	if (is_write)
+		memcpy(run->mmio.data, data_buf, len);
 
 	if (!ret) {
 		/* We handled the access successfully in the kernel. */
+		vcpu->stat.mmio_exit_kernel++;
 		kvm_handle_mmio_return(vcpu, run);
 		return 1;
+	} else {
+		vcpu->stat.mmio_exit_user++;
 	}
 
 	run->exit_reason	= KVM_EXIT_MMIO;
diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c
index 6984342da13d..58dbd5c439df 100644
--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -28,6 +28,7 @@
 #include <asm/kvm_mmio.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
+#include <asm/virt.h>
 
 #include "trace.h"
 
@@ -98,6 +99,11 @@ static void kvm_flush_dcache_pud(pud_t pud)
 	__kvm_flush_dcache_pud(pud);
 }
 
+static bool kvm_is_device_pfn(unsigned long pfn)
+{
+	return !pfn_valid(pfn);
+}
+
 /**
  * stage2_dissolve_pmd() - clear and flush huge PMD entry
  * @kvm:	pointer to kvm structure.
@@ -213,7 +219,7 @@ static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
 			kvm_tlb_flush_vmid_ipa(kvm, addr);
 
 			/* No need to invalidate the cache for device mappings */
-			if ((pte_val(old_pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+			if (!kvm_is_device_pfn(pte_pfn(old_pte)))
 				kvm_flush_dcache_pte(old_pte);
 
 			put_page(virt_to_page(pte));
@@ -305,8 +311,7 @@ static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
 
 	pte = pte_offset_kernel(pmd, addr);
 	do {
-		if (!pte_none(*pte) &&
-		    (pte_val(*pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+		if (!pte_none(*pte) && !kvm_is_device_pfn(pte_pfn(*pte)))
 			kvm_flush_dcache_pte(*pte);
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
@@ -594,6 +599,9 @@ int create_hyp_mappings(void *from, void *to)
 	unsigned long start = KERN_TO_HYP((unsigned long)from);
 	unsigned long end = KERN_TO_HYP((unsigned long)to);
 
+	if (is_kernel_in_hyp_mode())
+		return 0;
+
 	start = start & PAGE_MASK;
 	end = PAGE_ALIGN(end);
 
@@ -626,6 +634,9 @@ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr)
 	unsigned long start = KERN_TO_HYP((unsigned long)from);
 	unsigned long end = KERN_TO_HYP((unsigned long)to);
 
+	if (is_kernel_in_hyp_mode())
+		return 0;
+
 	/* Check for a valid kernel IO mapping */
 	if (!is_vmalloc_addr(from) || !is_vmalloc_addr(to - 1))
 		return -EINVAL;
@@ -652,9 +663,9 @@ static void *kvm_alloc_hwpgd(void)
  * kvm_alloc_stage2_pgd - allocate level-1 table for stage-2 translation.
  * @kvm:	The KVM struct pointer for the VM.
  *
- * Allocates the 1st level table only of size defined by S2_PGD_ORDER (can
- * support either full 40-bit input addresses or limited to 32-bit input
- * addresses). Clears the allocated pages.
+ * Allocates only the stage-2 HW PGD level table(s) (can support either full
+ * 40-bit input addresses or limited to 32-bit input addresses). Clears the
+ * allocated pages.
  *
  * Note we don't need locking here as this is only called when the VM is
  * created, which can only be done once.
@@ -988,9 +999,9 @@ out:
 	return ret;
 }
 
-static bool transparent_hugepage_adjust(pfn_t *pfnp, phys_addr_t *ipap)
+static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap)
 {
-	pfn_t pfn = *pfnp;
+	kvm_pfn_t pfn = *pfnp;
 	gfn_t gfn = *ipap >> PAGE_SHIFT;
 
 	if (PageTransCompound(pfn_to_page(pfn))) {
@@ -1037,11 +1048,6 @@ static bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_dabt_iswrite(vcpu);
 }
 
-static bool kvm_is_device_pfn(unsigned long pfn)
-{
-	return !pfn_valid(pfn);
-}
-
 /**
  * stage2_wp_ptes - write protect PMD range
  * @pmd:	pointer to pmd entry
@@ -1202,7 +1208,7 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
 	kvm_mmu_write_protect_pt_masked(kvm, slot, gfn_offset, mask);
 }
 
-static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
+static void coherent_cache_guest_page(struct kvm_vcpu *vcpu, kvm_pfn_t pfn,
 				      unsigned long size, bool uncached)
 {
 	__coherent_cache_guest_page(vcpu, pfn, size, uncached);
@@ -1219,7 +1225,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache;
 	struct vm_area_struct *vma;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	pgprot_t mem_type = PAGE_S2;
 	bool fault_ipa_uncached;
 	bool logging_active = memslot_is_logging(memslot);
@@ -1347,7 +1353,7 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 {
 	pmd_t *pmd;
 	pte_t *pte;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	bool pfn_valid = false;
 
 	trace_kvm_access_fault(fault_ipa);
@@ -1432,6 +1438,22 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		}
 
 		/*
+		 * Check for a cache maintenance operation. Since we
+		 * ended-up here, we know it is outside of any memory
+		 * slot. But we can't find out if that is for a device,
+		 * or if the guest is just being stupid. The only thing
+		 * we know for sure is that this range cannot be cached.
+		 *
+		 * So let's assume that the guest is just being
+		 * cautious, and skip the instruction.
+		 */
+		if (kvm_vcpu_dabt_is_cm(vcpu)) {
+			kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+			ret = 1;
+			goto out_unlock;
+		}
+
+		/*
 		 * The IPA is reported as [MAX:12], so we need to
 		 * complement it with the bottom 12 bits from the
 		 * faulting VA. This is always 12 bits, irrespective
diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c
index 0b556968a6da..c2b131527a64 100644
--- a/arch/arm/kvm/psci.c
+++ b/arch/arm/kvm/psci.c
@@ -70,12 +70,12 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 {
 	struct kvm *kvm = source_vcpu->kvm;
 	struct kvm_vcpu *vcpu = NULL;
-	wait_queue_head_t *wq;
+	struct swait_queue_head *wq;
 	unsigned long cpu_id;
 	unsigned long context_id;
 	phys_addr_t target_pc;
 
-	cpu_id = *vcpu_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
+	cpu_id = vcpu_get_reg(source_vcpu, 1) & MPIDR_HWID_BITMASK;
 	if (vcpu_mode_is_32bit(source_vcpu))
 		cpu_id &= ~((u32) 0);
 
@@ -94,8 +94,8 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 			return PSCI_RET_INVALID_PARAMS;
 	}
 
-	target_pc = *vcpu_reg(source_vcpu, 2);
-	context_id = *vcpu_reg(source_vcpu, 3);
+	target_pc = vcpu_get_reg(source_vcpu, 2);
+	context_id = vcpu_get_reg(source_vcpu, 3);
 
 	kvm_reset_vcpu(vcpu);
 
@@ -114,12 +114,12 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	 * NOTE: We always update r0 (or x0) because for PSCI v0.1
 	 * the general puspose registers are undefined upon CPU_ON.
 	 */
-	*vcpu_reg(vcpu, 0) = context_id;
+	vcpu_set_reg(vcpu, 0, context_id);
 	vcpu->arch.power_off = false;
 	smp_mb();		/* Make sure the above is visible */
 
 	wq = kvm_arch_vcpu_wq(vcpu);
-	wake_up_interruptible(wq);
+	swake_up(wq);
 
 	return PSCI_RET_SUCCESS;
 }
@@ -134,8 +134,8 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_vcpu *tmp;
 
-	target_affinity = *vcpu_reg(vcpu, 1);
-	lowest_affinity_level = *vcpu_reg(vcpu, 2);
+	target_affinity = vcpu_get_reg(vcpu, 1);
+	lowest_affinity_level = vcpu_get_reg(vcpu, 2);
 
 	/* Determine target affinity mask */
 	target_affinity_mask = psci_affinity_mask(lowest_affinity_level);
@@ -209,7 +209,7 @@ int kvm_psci_version(struct kvm_vcpu *vcpu)
 static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 {
 	int ret = 1;
-	unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
+	unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
 	unsigned long val;
 
 	switch (psci_fn) {
@@ -273,13 +273,13 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu)
 		break;
 	}
 
-	*vcpu_reg(vcpu, 0) = val;
+	vcpu_set_reg(vcpu, 0, val);
 	return ret;
 }
 
 static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 {
-	unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0);
+	unsigned long psci_fn = vcpu_get_reg(vcpu, 0) & ~((u32) 0);
 	unsigned long val;
 
 	switch (psci_fn) {
@@ -295,7 +295,7 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)
 		break;
 	}
 
-	*vcpu_reg(vcpu, 0) = val;
+	vcpu_set_reg(vcpu, 0, val);
 	return 1;
 }
 
diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c
index eeb85858d6bb..0048b5a62a50 100644
--- a/arch/arm/kvm/reset.c
+++ b/arch/arm/kvm/reset.c
@@ -71,7 +71,7 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	}
 
 	/* Reset core registers */
-	memcpy(&vcpu->arch.regs, reset_regs, sizeof(vcpu->arch.regs));
+	memcpy(&vcpu->arch.ctxt.gp_regs, reset_regs, sizeof(vcpu->arch.ctxt.gp_regs));
 
 	/* Reset CP15 registers */
 	kvm_reset_coprocs(vcpu);
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index af2267f6a529..9397b2e532af 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -205,6 +205,10 @@ Boston, MA 02111-1307, USA.  */
 .endm
 
 
+#ifdef CONFIG_ARM_PATCH_IDIV
+	.align	3
+#endif
+
 ENTRY(__udivsi3)
 ENTRY(__aeabi_uidiv)
 UNWIND(.fnstart)
@@ -253,6 +257,10 @@ UNWIND(.fnstart)
 UNWIND(.fnend)
 ENDPROC(__umodsi3)
 
+#ifdef CONFIG_ARM_PATCH_IDIV
+	.align 3
+#endif
+
 ENTRY(__divsi3)
 ENTRY(__aeabi_idiv)
 UNWIND(.fnstart)
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index d72b90905132..6bd1089b07e0 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -52,14 +52,13 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 	 *
 	 * Lock the page table for the destination and check
 	 * to see that it's still huge and whether or not we will
-	 * need to fault on write, or if we have a splitting THP.
+	 * need to fault on write.
 	 */
 	if (unlikely(pmd_thp_or_huge(*pmd))) {
 		ptl = &current->mm->page_table_lock;
 		spin_lock(ptl);
 		if (unlikely(!pmd_thp_or_huge(*pmd)
-			|| pmd_hugewillfault(*pmd)
-			|| pmd_trans_splitting(*pmd))) {
+			|| pmd_hugewillfault(*pmd))) {
 			spin_unlock(ptl);
 			return 0;
 		}
@@ -88,6 +87,7 @@ pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
 static unsigned long noinline
 __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 {
+	unsigned long ua_flags;
 	int atomic;
 
 	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
@@ -118,7 +118,9 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 		if (tocopy > n)
 			tocopy = n;
 
+		ua_flags = uaccess_save_and_enable();
 		memcpy((void *)to, from, tocopy);
+		uaccess_restore(ua_flags);
 		to += tocopy;
 		from += tocopy;
 		n -= tocopy;
@@ -145,14 +147,21 @@ arm_copy_to_user(void __user *to, const void *from, unsigned long n)
 	 * With frame pointer disabled, tail call optimization kicks in
 	 * as well making this test almost invisible.
 	 */
-	if (n < 64)
-		return __copy_to_user_std(to, from, n);
-	return __copy_to_user_memcpy(to, from, n);
+	if (n < 64) {
+		unsigned long ua_flags = uaccess_save_and_enable();
+		n = __copy_to_user_std(to, from, n);
+		uaccess_restore(ua_flags);
+	} else {
+		n = __copy_to_user_memcpy(to, from, n);
+	}
+	return n;
 }
 	
 static unsigned long noinline
 __clear_user_memset(void __user *addr, unsigned long n)
 {
+	unsigned long ua_flags;
+
 	if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
 		memset((void *)addr, 0, n);
 		return 0;
@@ -175,7 +184,9 @@ __clear_user_memset(void __user *addr, unsigned long n)
 		if (tocopy > n)
 			tocopy = n;
 
+		ua_flags = uaccess_save_and_enable();
 		memset((void *)addr, 0, tocopy);
+		uaccess_restore(ua_flags);
 		addr += tocopy;
 		n -= tocopy;
 
@@ -193,9 +204,14 @@ out:
 unsigned long arm_clear_user(void __user *addr, unsigned long n)
 {
 	/* See rational for this in __copy_to_user() above. */
-	if (n < 64)
-		return __clear_user_std(addr, n);
-	return __clear_user_memset(addr, n);
+	if (n < 64) {
+		unsigned long ua_flags = uaccess_save_and_enable();
+		n = __clear_user_std(addr, n);
+		uaccess_restore(ua_flags);
+	} else {
+		n = __clear_user_memset(addr, n);
+	}
+	return n;
 }
 
 #if 0
diff --git a/arch/arm/mach-alpine/Kconfig b/arch/arm/mach-alpine/Kconfig
index 2c44b930505a..b41838a58ae4 100644
--- a/arch/arm/mach-alpine/Kconfig
+++ b/arch/arm/mach-alpine/Kconfig
@@ -1,5 +1,7 @@
 config ARCH_ALPINE
-	bool "Annapurna Labs Alpine platform" if ARCH_MULTI_V7
+	bool "Annapurna Labs Alpine platform"
+	depends on ARCH_MULTI_V7
+	select ALPINE_MSI
 	select ARM_AMBA
 	select ARM_GIC
 	select GENERIC_IRQ_CHIP
diff --git a/arch/arm/mach-alpine/platsmp.c b/arch/arm/mach-alpine/platsmp.c
index f78429f48bd6..dd77ea25e7ca 100644
--- a/arch/arm/mach-alpine/platsmp.c
+++ b/arch/arm/mach-alpine/platsmp.c
@@ -42,7 +42,7 @@ static void __init alpine_smp_prepare_cpus(unsigned int max_cpus)
 	alpine_cpu_pm_init();
 }
 
-static struct smp_operations alpine_smp_ops __initdata = {
+static const struct smp_operations alpine_smp_ops __initconst = {
 	.smp_prepare_cpus	= alpine_smp_prepare_cpus,
 	.smp_boot_secondary	= alpine_boot_secondary,
 };
diff --git a/arch/arm/mach-artpec/Kconfig b/arch/arm/mach-artpec/Kconfig
new file mode 100644
index 000000000000..6cbe5a2eabab
--- /dev/null
+++ b/arch/arm/mach-artpec/Kconfig
@@ -0,0 +1,20 @@
+menuconfig ARCH_ARTPEC
+	bool "Axis Communications ARM based ARTPEC SoCs"
+	depends on ARCH_MULTI_V7
+
+if ARCH_ARTPEC
+
+config MACH_ARTPEC6
+	bool "Axis ARTPEC-6 ARM Cortex A9 Platform"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	help
+	  Support for Axis ARTPEC-6 ARM Cortex A9 Platform
+
+endif
diff --git a/arch/arm/mach-artpec/Makefile b/arch/arm/mach-artpec/Makefile
new file mode 100644
index 000000000000..78325f0c859c
--- /dev/null
+++ b/arch/arm/mach-artpec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MACH_ARTPEC6)		:= board-artpec6.o
diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c
new file mode 100644
index 000000000000..71513df3374e
--- /dev/null
+++ b/arch/arm/mach-artpec/board-artpec6.c
@@ -0,0 +1,72 @@
+/*
+ * ARTPEC-6 device support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <asm/smp_scu.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/psci.h>
+#include <linux/arm-smccc.h>
+
+
+#define ARTPEC6_DMACFG_REGNUM 0x10
+#define ARTPEC6_DMACFG_UARTS_BURST 0xff
+
+#define SECURE_OP_L2C_WRITEREG 0xb4000001
+
+static void __init artpec6_init_machine(void)
+{
+	struct regmap *regmap;
+
+	regmap = syscon_regmap_lookup_by_compatible("axis,artpec6-syscon");
+
+	if (!IS_ERR(regmap)) {
+		/* Use PL011 DMA Burst Request signal instead of DMA
+		 *  Single Request
+		 */
+		regmap_write(regmap, ARTPEC6_DMACFG_REGNUM,
+			     ARTPEC6_DMACFG_UARTS_BURST);
+	};
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(SECURE_OP_L2C_WRITEREG, reg, val, 0,
+		      0, 0, 0, 0, &res);
+
+	WARN_ON(res.a0);
+}
+
+static const char * const artpec6_dt_match[] = {
+	"axis,artpec6",
+	NULL
+};
+
+DT_MACHINE_START(ARTPEC6, "Axis ARTPEC-6 Platform")
+	.l2c_aux_val	= 0x0C000000,
+	.l2c_aux_mask	= 0xF3FFFFFF,
+	.l2c_write_sec  = artpec6_l2c310_write_sec,
+	.init_machine	= artpec6_init_machine,
+	.dt_compat	= artpec6_dt_match,
+MACHINE_END
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 92673006e55c..08047afdf38e 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -4,12 +4,12 @@ menuconfig ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
 	select PINCTRL
-	select PINCTRL_AT91
 	select SOC_BUS
 
 if ARCH_AT91
 config SOC_SAMA5D2
-	bool "SAMA5D2 family" if ARCH_MULTI_V7
+	bool "SAMA5D2 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select CACHE_L2X0
 	select HAVE_FB_ATMEL
@@ -17,22 +17,26 @@ config SOC_SAMA5D2
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
 	select HAVE_AT91_GENERATED_CLK
+	select PINCTRL_AT91PIO4
 	help
 	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
 
 config SOC_SAMA5D3
-	bool "SAMA5D3 family" if ARCH_MULTI_V7
+	bool "SAMA5D3 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
 
 config SOC_SAMA5D4
-	bool "SAMA5D4 family" if ARCH_MULTI_V7
+	bool "SAMA5D4 family"
+	depends on ARCH_MULTI_V7
 	select SOC_SAMA5
 	select CACHE_L2X0
 	select HAVE_FB_ATMEL
@@ -40,23 +44,27 @@ config SOC_SAMA5D4
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
 
 config SOC_AT91RM9200
-	bool "AT91RM9200" if ARCH_MULTI_V4T
+	bool "AT91RM9200"
+	depends on ARCH_MULTI_V4T
 	select ATMEL_AIC_IRQ
 	select ATMEL_ST
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
 	select MIGHT_HAVE_PCI
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
 	  Select this if you are using Atmel's AT91RM9200 SoC.
 
 config SOC_AT91SAM9
-	bool "AT91SAM9" if ARCH_MULTI_V5
+	bool "AT91SAM9"
+	depends on ARCH_MULTI_V5
 	select ATMEL_AIC_IRQ
 	select ATMEL_SDRAMC
 	select CPU_ARM926T
@@ -65,6 +73,7 @@ config SOC_AT91SAM9
 	select HAVE_AT91_UTMI
 	select HAVE_FB_ATMEL
 	select MEMORY
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
@@ -95,6 +104,7 @@ config HAVE_AT91_USB_CLK
 config COMMON_CLK_AT91
 	bool
 	select COMMON_CLK
+	select MFD_SYSCON
 
 config HAVE_AT91_SMD
 	bool
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index c1a7c6cc00e1..63b4fa25b48a 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -12,7 +12,6 @@
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/system_misc.h>
 
 #include "generic.h"
 #include "soc.h"
@@ -33,7 +32,6 @@ static void __init at91rm9200_dt_device_init(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
-	arm_pm_idle = at91rm9200_idle;
 	at91rm9200_pm_init();
 }
 
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
index 7eb64f763034..cada2a6412b3 100644
--- a/arch/arm/mach-at91/at91sam9.c
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -62,8 +62,6 @@ static void __init at91sam9_common_init(void)
 		soc_dev = soc_device_to_device(soc);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-
-	arm_pm_idle = at91sam9_idle;
 }
 
 static void __init at91sam9_dt_device_init(void)
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b0fa7dc7286d..28ca57a2060f 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -11,27 +11,18 @@
 #ifndef _AT91_GENERIC_H
 #define _AT91_GENERIC_H
 
-#include <linux/of.h>
-#include <linux/reboot.h>
-
- /* Map io */
-extern void __init at91_map_io(void);
-extern void __init at91_alt_map_io(void);
-
-/* idle */
-extern void at91rm9200_idle(void);
-extern void at91sam9_idle(void);
-
 #ifdef CONFIG_PM
 extern void __init at91rm9200_pm_init(void);
 extern void __init at91sam9260_pm_init(void);
 extern void __init at91sam9g45_pm_init(void);
 extern void __init at91sam9x5_pm_init(void);
+extern void __init sama5_pm_init(void);
 #else
 static inline void __init at91rm9200_pm_init(void) { }
 static inline void __init at91sam9260_pm_init(void) { }
 static inline void __init at91sam9g45_pm_init(void) { }
 static inline void __init at91sam9x5_pm_init(void) { }
+static inline void __init sama5_pm_init(void) { }
 #endif
 
 #endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 80e277cfcc8b..f06270198bf1 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -31,18 +31,23 @@
 #include <asm/mach/irq.h>
 #include <asm/fncpy.h>
 #include <asm/cacheflush.h>
+#include <asm/system_misc.h>
 
 #include "generic.h"
 #include "pm.h"
 
+static void __iomem *pmc;
+
 /*
  * FIXME: this is needed to communicate between the pinctrl driver and
  * the PM implementation in the machine. Possibly part of the PM
  * implementation should be moved down into the pinctrl driver and get
  * called as part of the generic suspend/resume path.
  */
+#ifdef CONFIG_PINCTRL_AT91
 extern void at91_pinctrl_gpio_suspend(void);
 extern void at91_pinctrl_gpio_resume(void);
+#endif
 
 static struct {
 	unsigned long uhp_udp_mask;
@@ -85,7 +90,7 @@ static int at91_pm_verify_clocks(void)
 	unsigned long scsr;
 	int i;
 
-	scsr = at91_pmc_read(AT91_PMC_SCSR);
+	scsr = readl(pmc + AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
 	if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
@@ -99,8 +104,7 @@ static int at91_pm_verify_clocks(void)
 
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
-
-		css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -143,16 +147,17 @@ static void at91_pm_suspend(suspend_state_t state)
 	flush_cache_all();
 	outer_disable();
 
-	at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
-				at91_ramc_base[1], pm_data);
+	at91_suspend_sram_fn(pmc, at91_ramc_base[0],
+			     at91_ramc_base[1], pm_data);
 
 	outer_resume();
 }
 
 static int at91_pm_enter(suspend_state_t state)
 {
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_suspend();
-
+#endif
 	switch (state) {
 	/*
 	 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
@@ -192,7 +197,9 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_resume();
+#endif
 	return 0;
 }
 
@@ -348,6 +355,21 @@ static __init void at91_dt_ramc(void)
 	at91_pm_set_standby(standby);
 }
 
+void at91rm9200_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+}
+
+void at91sam9_idle(void)
+{
+	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+	cpu_do_idle();
+}
+
 static void __init at91_pm_sram_init(void)
 {
 	struct gen_pool *sram_pool;
@@ -394,13 +416,36 @@ static void __init at91_pm_sram_init(void)
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
 }
 
-static void __init at91_pm_init(void)
+static const struct of_device_id atmel_pmc_ids[] __initconst = {
+	{ .compatible = "atmel,at91rm9200-pmc"  },
+	{ .compatible = "atmel,at91sam9260-pmc" },
+	{ .compatible = "atmel,at91sam9g45-pmc" },
+	{ .compatible = "atmel,at91sam9n12-pmc" },
+	{ .compatible = "atmel,at91sam9x5-pmc" },
+	{ .compatible = "atmel,sama5d3-pmc" },
+	{ .compatible = "atmel,sama5d2-pmc" },
+	{ /* sentinel */ },
+};
+
+static void __init at91_pm_init(void (*pm_idle)(void))
 {
-	at91_pm_sram_init();
+	struct device_node *pmc_np;
 
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
+	pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
+	pmc = of_iomap(pmc_np, 0);
+	if (!pmc) {
+		pr_err("AT91: PM not supported, PMC not found\n");
+		return;
+	}
+
+	if (pm_idle)
+		arm_pm_idle = pm_idle;
+
+	at91_pm_sram_init();
+
 	if (at91_suspend_sram_fn)
 		suspend_set_ops(&at91_pm_ops);
 	else
@@ -419,7 +464,7 @@ void __init at91rm9200_pm_init(void)
 	at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_MC;
 
-	at91_pm_init();
+	at91_pm_init(at91rm9200_idle);
 }
 
 void __init at91sam9260_pm_init(void)
@@ -427,7 +472,7 @@ void __init at91sam9260_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9g45_pm_init(void)
@@ -435,7 +480,7 @@ void __init at91sam9g45_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9x5_pm_init(void)
@@ -443,5 +488,13 @@ void __init at91sam9x5_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
+}
+
+void __init sama5_pm_init(void)
+{
+	at91_dt_ramc();
+	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+	at91_pm_init(NULL);
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index 0d95f488b47a..a25defda3d22 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -80,6 +80,8 @@ tmp2	.req	r5
  *	@r2: base address of second SDRAM Controller or 0 if not present
  *	@r3: pm information
  */
+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+	.align 3
 ENTRY(at91_pm_suspend_in_sram)
 	/* Save registers on stack */
 	stmfd	sp!, {r4 - r12, lr}
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
index d9cf6799aec0..df8fdf1cf66d 100644
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@@ -51,7 +51,7 @@ static void __init sama5_dt_device_init(void)
 		soc_dev = soc_device_to_device(soc);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-	at91sam9x5_pm_init();
+	sama5_pm_init();
 }
 
 static const char *const sama5_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig
index 8be7e0ae1922..6c6d5e76565b 100644
--- a/arch/arm/mach-axxia/Kconfig
+++ b/arch/arm/mach-axxia/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_AXXIA
-	bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE)
+	bool "LSI Axxia platforms"
+	depends on ARCH_MULTI_V7 && ARM_LPAE
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c
index 959d4df3d2b6..ffbd71d45008 100644
--- a/arch/arm/mach-axxia/platsmp.c
+++ b/arch/arm/mach-axxia/platsmp.c
@@ -82,7 +82,7 @@ static void __init axxia_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-static struct smp_operations axxia_smp_ops __initdata = {
+static const struct smp_operations axxia_smp_ops __initconst = {
 	.smp_prepare_cpus	= axxia_smp_prepare_cpus,
 	.smp_boot_secondary	= axxia_boot_secondary,
 };
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 84bd26535ae9..7ef121472cdd 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_BCM
-	bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7
+	bool "Broadcom SoC Support"
+	depends on ARCH_MULTI_V6_V7
 	help
 	  This enables support for Broadcom ARM based SoC chips
 
@@ -27,7 +28,8 @@ config ARCH_BCM_IPROC
 	  Currently supported SoCs are Cygnus.
 
 config ARCH_BCM_CYGNUS
-	bool "Broadcom Cygnus Support" if ARCH_MULTI_V7
+	bool "Broadcom Cygnus Support"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_IPROC
 	help
 	  Enable support for the Cygnus family,
@@ -35,9 +37,32 @@ config ARCH_BCM_CYGNUS
 	  BCM11300, BCM11320, BCM11350, BCM11360,
 	  BCM58300, BCM58302, BCM58303, BCM58305.
 
+config ARCH_BCM_NSP
+	bool "Broadcom Northstar Plus SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARCH_BCM_IPROC
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_SMP
+	help
+	  Support for Broadcom Northstar Plus SoC.
+	  Broadcom Northstar Plus family of SoCs are used for switching control
+	  and management applications as well as residential router/gateway
+	  applications. The SoC features dual core Cortex A9 ARM CPUs,
+	  integrating several peripheral interfaces including multiple Gigabit
+	  Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and
+	  NAND flash, SATA and several other IO controllers.
+
 config ARCH_BCM_5301X
-	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	bool "Broadcom BCM470X / BCM5301X ARM SoC"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_IPROC
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_SMP
+
 	help
 	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
 
@@ -68,7 +93,8 @@ config ARCH_BCM_MOBILE
 	  This enables support for systems based on Broadcom mobile SoCs.
 
 config ARCH_BCM_281XX
-	bool "Broadcom BCM281XX SoC family" if ARCH_MULTI_V7
+	bool "Broadcom BCM281XX SoC family"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
@@ -77,7 +103,8 @@ config ARCH_BCM_281XX
 	  variants.
 
 config ARCH_BCM_21664
-	bool "Broadcom BCM21664 SoC family" if ARCH_MULTI_V7
+	bool "Broadcom BCM21664 SoC family"
+	depends on ARCH_MULTI_V7
 	select ARCH_BCM_MOBILE
 	select HAVE_SMP
 	help
@@ -108,20 +135,23 @@ config ARCH_BCM_MOBILE_SMP
 comment "Other Architectures"
 
 config ARCH_BCM2835
-	bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
+	bool "Broadcom BCM2835 family"
+	depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select ARM_ERRATA_411920
+	select ARM_ERRATA_411920 if ARCH_MULTI_V6
 	select ARM_TIMER_SP804
+	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select CLKSRC_OF
 	select PINCTRL
 	select PINCTRL_BCM2835
 	help
-	  This enables support for the Broadcom BCM2835 SoC. This SoC is
-	  used in the Raspberry Pi and Roku 2 devices.
+	  This enables support for the Broadcom BCM2835 and BCM2836 SoCs.
+	  This SoC is used in the Raspberry Pi and Roku 2 devices.
 
 config ARCH_BCM_63XX
-	bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
+	bool "Broadcom BCM63xx DSL SoC"
+	depends on ARCH_MULTI_V7
 	depends on MMU
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
@@ -138,7 +168,8 @@ config ARCH_BCM_63XX
 	  the BCM63138 variant.
 
 config ARCH_BRCMSTB
-	bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
+	bool "Broadcom BCM7XXX based boards"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
@@ -147,6 +178,7 @@ config ARCH_BRCMSTB
 	select BCM7120_L2_IRQ
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select SOC_BRCMSTB
 	help
 	  Say Y if you intend to run the kernel on a Broadcom ARM-based STB
 	  chipset.
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 1780a3ff42f9..7d665151c772 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012-2014 Broadcom Corporation
+# Copyright (C) 2012-2015 Broadcom Corporation
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -13,6 +13,13 @@
 # Cygnus
 obj-$(CONFIG_ARCH_BCM_CYGNUS) +=  bcm_cygnus.o
 
+# Northstar Plus
+obj-$(CONFIG_ARCH_BCM_NSP)	+= bcm_nsp.o
+
+ifeq ($(CONFIG_ARCH_BCM_NSP),y)
+obj-$(CONFIG_SMP)		+= platsmp.o
+endif
+
 # BCM281XX
 obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
 
@@ -20,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX)	+= board_bcm281xx.o
 obj-$(CONFIG_ARCH_BCM_21664)	+= board_bcm21664.o
 
 # BCM281XX and BCM21664 SMP support
-obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
+obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
 
 # BCM281XX and BCM21664 L2 cache control
 obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
@@ -36,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835)	+= board_bcm2835.o
 
 # BCM5301X
 obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o
+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
+obj-$(CONFIG_SMP)		+= platsmp.o
+endif
 
 # BCM63XXx
 ifeq ($(CONFIG_ARCH_BCM_63XX),y)
diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c
index de061ec5a479..41dcf5d65630 100644
--- a/arch/arm/mach-bcm/bcm63xx_pmb.c
+++ b/arch/arm/mach-bcm/bcm63xx_pmb.c
@@ -92,7 +92,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn,
 				     unsigned int *cpu,
 				     unsigned int *addr)
 {
-	struct device_node *pmb_dn;
 	struct of_phandle_args args;
 	int ret;
 
@@ -109,7 +108,6 @@ static int bcm63xx_pmb_get_resources(struct device_node *dn,
 		return ret;
 	}
 
-	pmb_dn = args.np;
 	if (args.args_count != 2) {
 		pr_err("reset-controller does not conform to reset-cells\n");
 		return -EINVAL;
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
index 19be90421f4d..9b6727ed68cd 100644
--- a/arch/arm/mach-bcm/bcm63xx_smp.c
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -161,7 +161,7 @@ static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-struct smp_operations bcm63138_smp_ops __initdata = {
+static const struct smp_operations bcm63138_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm63138_smp_prepare_cpus,
 	.smp_boot_secondary	= bcm63138_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c
index 5478fe6bcce6..c8830a2b0d60 100644
--- a/arch/arm/mach-bcm/bcm_5301x.c
+++ b/arch/arm/mach-bcm/bcm_5301x.c
@@ -9,40 +9,6 @@
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
-#include <asm/siginfo.h>
-#include <asm/signal.h>
-
-
-static bool first_fault = true;
-
-static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
-				 struct pt_regs *regs)
-{
-	if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
-		first_fault = false;
-
-		/*
-		 * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
-		 * for no good reason, possibly left over from the CFE boot
-		 * loader.
-		 */
-		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
-			addr, fsr);
-
-		/* Returning non-zero causes fault display and panic */
-		return 0;
-	}
-
-	/* Others should cause a fault */
-	return 1;
-}
-
-static void __init bcm5301x_init_early(void)
-{
-	/* Install our hook */
-	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
-			"imprecise external abort");
-}
 
 static const char *const bcm5301x_dt_compat[] __initconst = {
 	"brcm,bcm4708",
@@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_compat[] __initconst = {
 DT_MACHINE_START(BCM5301X, "BCM5301X")
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-	.init_early	= bcm5301x_init_early,
 	.dt_compat	= bcm5301x_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/bcm_nsp.c b/arch/arm/mach-bcm/bcm_nsp.c
new file mode 100644
index 000000000000..a1101a3d318e
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm_nsp.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const bcm_nsp_dt_compat[] __initconst = {
+	"brcm,nsp",
+	NULL,
+};
+
+DT_MACHINE_START(NSP_DT, "Broadcom Northstar Plus SoC")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.dt_compat = bcm_nsp_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
index 0f7b9eac3d15..834d67684e20 100644
--- a/arch/arm/mach-bcm/board_bcm2835.c
+++ b/arch/arm/mach-bcm/board_bcm2835.c
@@ -36,7 +36,12 @@ static void __init bcm2835_init(void)
 }
 
 static const char * const bcm2835_compat[] = {
+#ifdef CONFIG_ARCH_MULTI_V6
 	"brcm,bcm2835",
+#endif
+#ifdef CONFIG_ARCH_MULTI_V7
+	"brcm,bcm2836",
+#endif
 	NULL
 };
 
diff --git a/arch/arm/mach-bcm/brcmstb.c b/arch/arm/mach-bcm/brcmstb.c
index 3a60f7ee3f0c..99a67cfb7c0d 100644
--- a/arch/arm/mach-bcm/brcmstb.c
+++ b/arch/arm/mach-bcm/brcmstb.c
@@ -12,11 +12,19 @@
  */
 
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
+#include <linux/soc/brcmstb/brcmstb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+static void __init brcmstb_init_irq(void)
+{
+	irqchip_init();
+	brcmstb_biuctrl_init();
+}
+
 static const char *const brcmstb_match[] __initconst = {
 	"brcm,bcm7445",
 	"brcm,brcmstb",
@@ -25,4 +33,5 @@ static const char *const brcmstb_match[] __initconst = {
 
 DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
 	.dt_compat	= brcmstb_match,
+	.init_irq	= brcmstb_init_irq,
 MACHINE_END
diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c
index 44d6bddf7a4e..40dc8448445e 100644
--- a/arch/arm/mach-bcm/platsmp-brcmstb.c
+++ b/arch/arm/mach-bcm/platsmp-brcmstb.c
@@ -356,7 +356,7 @@ static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-static struct smp_operations brcmstb_smp_ops __initdata = {
+static const struct smp_operations brcmstb_smp_ops __initconst = {
 	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
 	.smp_boot_secondary	= brcmstb_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c
index 66a0465528a5..cfae9c71fb74 100644
--- a/arch/arm/mach-bcm/kona_smp.c
+++ b/arch/arm/mach-bcm/platsmp.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2015 Broadcom Corporation
  * Copyright 2014 Linaro Limited
  *
  * This program is free software; you can redistribute it and/or
@@ -12,12 +12,17 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/init.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
+#include <linux/init.h>
 #include <linux/io.h>
+#include <linux/jiffies.h>
 #include <linux/of.h>
 #include <linux/sched.h>
+#include <linux/smp.h>
 
+#include <asm/cacheflush.h>
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
@@ -30,9 +35,10 @@
 
 /* Name of device node property defining secondary boot register location */
 #define OF_SECONDARY_BOOT	"secondary-boot-reg"
+#define MPIDR_CPUID_BITMASK	0x3
 
 /* I/O address of register used to coordinate secondary core startup */
-static u32	secondary_boot;
+static u32	secondary_boot_addr;
 
 /*
  * Enable the Cortex A9 Snoop Control Unit
@@ -75,47 +81,101 @@ static int __init scu_a9_enable(void)
 	return 0;
 }
 
+static int nsp_write_lut(void)
+{
+	void __iomem *sku_rom_lut;
+	phys_addr_t secondary_startup_phy;
+
+	if (!secondary_boot_addr) {
+		pr_warn("required secondary boot register not specified\n");
+		return -EINVAL;
+	}
+
+	sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
+						sizeof(secondary_boot_addr));
+	if (!sku_rom_lut) {
+		pr_warn("unable to ioremap SKU-ROM LUT register\n");
+		return -ENOMEM;
+	}
+
+	secondary_startup_phy = virt_to_phys(secondary_startup);
+	BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
+
+	writel_relaxed(secondary_startup_phy, sku_rom_lut);
+
+	/* Ensure the write is visible to the secondary core */
+	smp_wmb();
+
+	iounmap(sku_rom_lut);
+
+	return 0;
+}
+
 static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
 {
 	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-	struct device_node *node;
+	struct device_node *cpus_node = NULL;
+	struct device_node *cpu_node = NULL;
 	int ret;
 
-	BUG_ON(secondary_boot);		/* We're called only once */
-
 	/*
 	 * This function is only called via smp_ops->smp_prepare_cpu().
 	 * That only happens if a "/cpus" device tree node exists
 	 * and has an "enable-method" property that selects the SMP
 	 * operations defined herein.
 	 */
-	node = of_find_node_by_path("/cpus");
-	BUG_ON(!node);
+	cpus_node = of_find_node_by_path("/cpus");
+	if (!cpus_node)
+		return;
 
-	/*
-	 * Our secondary enable method requires a "secondary-boot-reg"
-	 * property to specify a register address used to request the
-	 * ROM code boot a secondary code.  If we have any trouble
-	 * getting this we fall back to uniprocessor mode.
-	 */
-	if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
-		pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
-			node->name);
-		ret = -ENOENT;		/* Arrange to disable SMP */
-		goto out;
+	for_each_child_of_node(cpus_node, cpu_node) {
+		u32 cpuid;
+
+		if (of_node_cmp(cpu_node->type, "cpu"))
+			continue;
+
+		if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
+			pr_debug("%s: missing reg property\n",
+				     cpu_node->full_name);
+			ret = -ENOENT;
+			goto out;
+		}
+
+		/*
+		 * "secondary-boot-reg" property should be defined only
+		 * for secondary cpu
+		 */
+		if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
+			/*
+			 * Our secondary enable method requires a
+			 * "secondary-boot-reg" property to specify a register
+			 * address used to request the ROM code boot a secondary
+			 * core. If we have any trouble getting this we fall
+			 * back to uniprocessor mode.
+			 */
+			if (of_property_read_u32(cpu_node,
+						OF_SECONDARY_BOOT,
+						&secondary_boot_addr)) {
+				pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
+					cpu_node->name);
+				ret = -ENOENT;
+				goto out;
+			}
+		}
 	}
 
 	/*
-	 * Enable the SCU on Cortex A9 based SoCs.  If -ENOENT is
+	 * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
 	 * returned, the SoC reported a uniprocessor configuration.
 	 * We bail on any other error.
 	 */
 	ret = scu_a9_enable();
 out:
-	of_node_put(node);
+	of_node_put(cpu_node);
+	of_node_put(cpus_node);
+
 	if (ret) {
 		/* Update the CPU present map to reflect uniprocessor mode */
-		BUG_ON(ret != -ENOENT);
 		pr_warn("disabling SMP\n");
 		init_cpu_present(&only_cpu_0);
 	}
@@ -139,7 +199,7 @@ out:
  * - Wait for the secondary boot register to be re-written, which
  *   indicates the secondary core has started.
  */
-static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	void __iomem *boot_reg;
 	phys_addr_t boot_func;
@@ -154,15 +214,16 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -EINVAL;
 	}
 
-	if (!secondary_boot) {
+	if (!secondary_boot_addr) {
 		pr_err("required secondary boot register not specified\n");
 		return -EINVAL;
 	}
 
-	boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
+	boot_reg = ioremap_nocache(
+			(phys_addr_t)secondary_boot_addr, sizeof(u32));
 	if (!boot_reg) {
 		pr_err("unable to map boot register for cpu %u\n", cpu_id);
-		return -ENOSYS;
+		return -ENOMEM;
 	}
 
 	/*
@@ -191,12 +252,39 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	pr_err("timeout waiting for cpu %u to start\n", cpu_id);
 
-	return -ENOSYS;
+	return -ENXIO;
 }
 
-static struct smp_operations bcm_smp_ops __initdata = {
+static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret;
+
+	/*
+	 * After wake up, secondary core branches to the startup
+	 * address programmed at SKU ROM LUT location.
+	 */
+	ret = nsp_write_lut();
+	if (ret) {
+		pr_err("unable to write startup addr to SKU ROM LUT\n");
+		goto out;
+	}
+
+	/* Send a CPU wakeup interrupt to the secondary core */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+out:
+	return ret;
+}
+
+static const struct smp_operations bcm_smp_ops __initconst = {
 	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
-	.smp_boot_secondary	= bcm_boot_secondary,
+	.smp_boot_secondary	= kona_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
 			&bcm_smp_ops);
+
+static const struct smp_operations nsp_smp_ops __initconst = {
+	.smp_prepare_cpus	= bcm_smp_prepare_cpus,
+	.smp_boot_secondary	= nsp_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 742d53a5f7f9..ffbfa0bd091b 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_BERLIN
-	bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
+	bool "Marvell Berlin SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC
diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index ac181c6797ee..25d73870ccca 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -18,6 +18,11 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
+static void __init berlin_init_late(void)
+{
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+}
+
 static const char * const berlin_dt_compat[] = {
 	"marvell,berlin",
 	NULL,
@@ -25,6 +30,7 @@ static const char * const berlin_dt_compat[] = {
 
 DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
 	.dt_compat	= berlin_dt_compat,
+	.init_late	= berlin_init_late,
 	/*
 	 * with DT probing for L2CCs, berlin_init_machine can be removed.
 	 * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c
index 34a3753e7356..93f90688db18 100644
--- a/arch/arm/mach-berlin/platsmp.c
+++ b/arch/arm/mach-berlin/platsmp.c
@@ -14,10 +14,16 @@
 #include <linux/of_address.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cp15.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#define CPU_RESET		0x00
+/*
+ * There are two reset registers, one with self-clearing (SC)
+ * reset and one with non-self-clearing reset (NON_SC).
+ */
+#define CPU_RESET_SC		0x00
+#define CPU_RESET_NON_SC	0x20
 
 #define RESET_VECT		0x00
 #define SW_RESET_ADDR		0x94
@@ -30,9 +36,11 @@ static inline void berlin_perform_reset_cpu(unsigned int cpu)
 {
 	u32 val;
 
-	val = readl(cpu_ctrl + CPU_RESET);
+	val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+	val &= ~BIT(cpu_logical_map(cpu));
+	writel(val, cpu_ctrl + CPU_RESET_NON_SC);
 	val |= BIT(cpu_logical_map(cpu));
-	writel(val, cpu_ctrl + CPU_RESET);
+	writel(val, cpu_ctrl + CPU_RESET_NON_SC);
 }
 
 static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -91,8 +99,32 @@ unmap_scu:
 	iounmap(scu_base);
 }
 
-static struct smp_operations berlin_smp_ops __initdata = {
+#ifdef CONFIG_HOTPLUG_CPU
+static void berlin_cpu_die(unsigned int cpu)
+{
+	v7_exit_coherency_flush(louis);
+	while (1)
+		cpu_do_idle();
+}
+
+static int berlin_cpu_kill(unsigned int cpu)
+{
+	u32 val;
+
+	val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+	val &= ~BIT(cpu_logical_map(cpu));
+	writel(val, cpu_ctrl + CPU_RESET_NON_SC);
+
+	return 1;
+}
+#endif
+
+static const struct smp_operations berlin_smp_ops __initconst = {
 	.smp_prepare_cpus	= berlin_smp_prepare_cpus,
 	.smp_boot_secondary	= berlin_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= berlin_cpu_die,
+	.cpu_kill		= berlin_cpu_kill,
+#endif
 };
 CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops);
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index c3d964221767..ba3d7d1b28f8 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -31,7 +31,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
 #include <linux/platform_device.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index e68dd629bda2..80a16a8b3776 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -28,7 +28,7 @@
 #include <linux/leds.h>
 #include <linux/sizes.h>
 #include <linux/backlight.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand-gpio.h>
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 3c22a1990ecd..eb14a0ff0093 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_CNS3XXX
-	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
+	bool "Cavium Networks CNS3XXX family"
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
 	select PCI_DOMAINS if PCI
 	help
diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot
deleted file mode 100644
index d079de0b6e3b..000000000000
--- a/arch/arm/mach-cns3xxx/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00C00000
diff --git a/arch/arm/mach-cns3xxx/cns3xxx.h b/arch/arm/mach-cns3xxx/cns3xxx.h
index a0f5b60662ae..a642ba5feb64 100644
--- a/arch/arm/mach-cns3xxx/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
@@ -162,13 +162,11 @@
 #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
 
 #define CNS3XXX_PCIE0_MEM_BASE			0xA0000000	/* PCIe Port 0 IO/Memory Space */
-#define CNS3XXX_PCIE0_MEM_BASE_VIRT		0xE0000000
 
 #define CNS3XXX_PCIE0_HOST_BASE			0xAB000000	/* PCIe Port 0 RC Base */
 #define CNS3XXX_PCIE0_HOST_BASE_VIRT		0xE1000000
 
 #define CNS3XXX_PCIE0_IO_BASE			0xAC000000	/* PCIe Port 0 */
-#define CNS3XXX_PCIE0_IO_BASE_VIRT		0xE2000000
 
 #define CNS3XXX_PCIE0_CFG0_BASE			0xAD000000	/* PCIe Port 0 CFG Type 0 */
 #define CNS3XXX_PCIE0_CFG0_BASE_VIRT		0xE3000000
@@ -177,16 +175,13 @@
 #define CNS3XXX_PCIE0_CFG1_BASE_VIRT		0xE4000000
 
 #define CNS3XXX_PCIE0_MSG_BASE			0xAF000000	/* PCIe Port 0 Message Space */
-#define CNS3XXX_PCIE0_MSG_BASE_VIRT		0xE5000000
 
 #define CNS3XXX_PCIE1_MEM_BASE			0xB0000000	/* PCIe Port 1 IO/Memory Space */
-#define CNS3XXX_PCIE1_MEM_BASE_VIRT		0xE8000000
 
 #define CNS3XXX_PCIE1_HOST_BASE			0xBB000000	/* PCIe Port 1 RC Base */
 #define CNS3XXX_PCIE1_HOST_BASE_VIRT		0xE9000000
 
 #define CNS3XXX_PCIE1_IO_BASE			0xBC000000	/* PCIe Port 1 */
-#define CNS3XXX_PCIE1_IO_BASE_VIRT		0xEA000000
 
 #define CNS3XXX_PCIE1_CFG0_BASE			0xBD000000	/* PCIe Port 1 CFG Type 0 */
 #define CNS3XXX_PCIE1_CFG0_BASE_VIRT		0xEB000000
@@ -195,7 +190,6 @@
 #define CNS3XXX_PCIE1_CFG1_BASE_VIRT		0xEC000000
 
 #define CNS3XXX_PCIE1_MSG_BASE			0xBF000000	/* PCIe Port 1 Message Space */
-#define CNS3XXX_PCIE1_MSG_BASE_VIRT		0xED000000
 
 /*
  * Testchip peripheral and fpga gic regions
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index c622c306c390..318394ed5c7a 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -65,8 +65,9 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
 
 	/*
 	 * The CNS PCI bridge doesn't fit into the PCI hierarchy, though
-	 * we still want to access it. For this to work, we must place
-	 * the first device on the same bus as the CNS PCI bridge.
+	 * we still want to access it.
+	 * We place the host bridge on bus 0, and the directly connected
+	 * device on bus 1, slot 0.
 	 */
 	if (busno == 0) { /* internal PCIe bus, host bridge device */
 		if (devfn == 0) /* device# and function# are ignored by hw */
@@ -211,58 +212,46 @@ static void __init cns3xxx_pcie_check_link(struct cns3xxx_pcie *cnspci)
 	}
 }
 
+static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
+					 int where, int size, u32 val)
+{
+	void __iomem *base = cnspci->host_regs + (where & 0xffc);
+	u32 v;
+	u32 mask = (0x1ull << (size * 8)) - 1;
+	int shift = (where % 4) * 8;
+
+	v = readl_relaxed(base);
+
+	v &= ~(mask << shift);
+	v |= (val & mask) << shift;
+
+	writel_relaxed(v, base);
+	readl_relaxed(base);
+}
+
 static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
 {
-	int port = cnspci->port;
-	struct pci_sys_data sd = {
-		.private_data = cnspci,
-	};
-	struct pci_bus bus = {
-		.number = 0,
-		.ops = &cns3xxx_pcie_ops,
-		.sysdata = &sd,
-	};
 	u16 mem_base  = cnspci->res_mem.start >> 16;
 	u16 mem_limit = cnspci->res_mem.end   >> 16;
 	u16 io_base   = cnspci->res_io.start  >> 16;
 	u16 io_limit  = cnspci->res_io.end    >> 16;
-	u32 devfn = 0;
-	u8 tmp8;
-	u16 pos;
-	u16 dc;
-
-	pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
-	pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
-	pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
 
-	pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
-	pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
-	pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
-
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
-	pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit);
+	cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
+	cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
+	cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
+	cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
+	cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
+	cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
+	cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
 
 	if (!cnspci->linked)
 		return;
 
 	/* Set Device Max_Read_Request_Size to 128 byte */
-	bus.number = 1; /* directly connected PCIe device */
-	devfn = PCI_DEVFN(0, 0);
-	pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
-	pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-	if (dc & PCI_EXP_DEVCTL_READRQ) {
-		dc &= ~PCI_EXP_DEVCTL_READRQ;
-		pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
-		pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
-		if (dc & PCI_EXP_DEVCTL_READRQ)
-			pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n");
-		else
-			pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n");
-	}
+	pcie_bus_config = PCIE_BUS_PEER2PEER;
+
 	/* Disable PCIe0 Interrupt Mask INTA to INTD */
-	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
+	__raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
 }
 
 static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index dd8f5312b2c0..36c8f5324e43 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -9,7 +9,6 @@ config CP_INTC
 
 config ARCH_DAVINCI_DMx
 	bool
-	select CPU_ARM926T
 
 menu "TI DaVinci Implementations"
 
@@ -32,20 +31,20 @@ config ARCH_DAVINCI_DM646x
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
 	select ARCH_DAVINCI_DA8XX
-	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+	# needed on silicon revs 1.0, 1.1:
+	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
 	select CP_INTC
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	depends on !ARCH_DAVINCI_DMx || AUTO_ZRELADDR
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
 	select ARCH_DAVINCI_DA8XX
 	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
 	bool
-	select CPU_ARM926T
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
@@ -57,7 +56,7 @@ comment "DaVinci Board Type"
 config MACH_DA8XX_DT
 	bool "Support DA8XX platforms using device tree"
 	default y
-	depends on ARCH_DAVINCI_DA8XX
+	depends on ARCH_DAVINCI_DA850
 	select PINCTRL
 	help
 	  Say y here to include support for TI DaVinci DA850 based using
@@ -67,8 +66,6 @@ config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
 	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
-	select EEPROM_AT24
-	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
@@ -76,8 +73,6 @@ config MACH_DAVINCI_EVM
 config MACH_SFFSDR
 	bool "Lyrtech SFFSDR"
 	depends on ARCH_DAVINCI_DM644x
-	select EEPROM_AT24
-	select I2C
 	help
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
@@ -108,8 +103,6 @@ config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
-	select EEPROM_AT24
-	select I2C
 	select MACH_DAVINCI_DM6467TEVM
 	help
 	  Configure this option to specify the whether the board used
@@ -122,8 +115,6 @@ config MACH_DAVINCI_DM365_EVM
 	bool "TI DM365 EVM"
 	default ARCH_DAVINCI_DM365
 	depends on ARCH_DAVINCI_DM365
-	select EEPROM_AT24
-	select I2C
 	help
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
@@ -132,9 +123,7 @@ config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
-	select EEPROM_AT24
-	select GPIO_PCF857X
-	select I2C
+	select GPIO_PCF857X if I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -203,8 +192,6 @@ endchoice
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850
-	select EEPROM_AT24
-	select I2C
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index f8f62fbaa915..3d8cf8cbd98a 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/mux.h>
 #include <mach/da8xx.h>
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1ed545cc2b83..8e4539f69fdc 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -40,17 +40,17 @@
 #include <linux/spi/flash.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <mach/mux.h>
-#include <mach/sram.h>
+#include "sram.h"
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/system_info.h>
 
-#include <media/tvp514x.h>
-#include <media/adv7343.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
 
 #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index b46b4d25f93e..1844076f6403 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -19,7 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
-#include <media/tvp514x.h>
+#include <media/i2c/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -384,9 +384,7 @@ static __init void dm355_evm_init(void)
 	dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
 
 	aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
+	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
 		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_evm_devices,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 680a7a2d9102..284ff27c1b32 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -242,9 +242,7 @@ static __init void dm355_leopard_init(void)
 	dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
 
 	aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
-	if (IS_ERR(aemif))
-		WARN("%s: unable to get AEMIF clock\n", __func__);
-	else
+	if (!WARN(IS_ERR(aemif), "unable to get AEMIF clock\n"))
 		clk_prepare_enable(aemif);
 
 	platform_add_devices(davinci_leopard_devices,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index a756003595e9..f073518f621a 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -40,8 +40,8 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/keyscan-davinci.h>
 
-#include <media/ths7303.h>
-#include <media/tvp514x.h>
+#include <media/i2c/ths7303.h>
+#include <media/i2c/tvp514x.h>
 
 #include "davinci.h"
 
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 1a0898c1c17e..68cc09907828 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -26,7 +26,7 @@
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 
-#include <media/tvp514x.h>
+#include <media/i2c/tvp514x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -267,7 +267,7 @@ static struct platform_device rtc_dev = {
 static struct snd_platform_data dm644x_evm_snd_data;
 
 /*----------------------------------------------------------------------*/
-
+#ifdef CONFIG_I2C
 /*
  * I2C GPIO expanders
  */
@@ -546,9 +546,7 @@ static int dm6444evm_msp430_get_pins(void)
 	if (status < 0)
 		return status;
 
-	dev_dbg(&dm6446evm_msp->dev,
-		"PINS: %02x %02x %02x %02x\n",
-		buf[0], buf[1], buf[2], buf[3]);
+	dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
 
 	return (buf[3] << 8) | buf[2];
 }
@@ -614,6 +612,7 @@ static void __init evm_init_i2c(void)
 	i2c_add_driver(&dm6446evm_msp_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
 }
+#endif
 
 #define VENC_STD_ALL	(V4L2_STD_NTSC | V4L2_STD_PAL)
 
@@ -782,7 +781,9 @@ static __init void davinci_evm_init(void)
 				pr_warn("%s: Cannot configure AEMIF\n",
 					__func__);
 
+#ifdef CONFIG_I2C
 			evm_leds[7].default_trigger = "nand-disk";
+#endif
 			if (HAS_NOR)
 				pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
 		} else if (HAS_NOR)
@@ -791,9 +792,10 @@ static __init void davinci_evm_init(void)
 
 	platform_add_devices(davinci_evm_devices,
 			     ARRAY_SIZE(davinci_evm_devices));
+#ifdef CONFIG_I2C
 	evm_init_i2c();
-
 	davinci_setup_mmc(0, &dm6446evm_mmc_config);
+#endif
 	dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg);
 
 	davinci_serial_init(dm644x_serial_device);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 846a84ddc28e..f702d4fc8eb8 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -25,8 +25,8 @@
 #include <linux/platform_data/at24.h>
 #include <linux/i2c/pcf857x.h>
 
-#include <media/tvp514x.h>
-#include <media/adv7343.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -121,6 +121,7 @@ static struct platform_device davinci_nand_device = {
 
 #define HAS_ATA		IS_ENABLED(CONFIG_BLK_DEV_PALMCHIP_BK3710)
 
+#ifdef CONFIG_I2C
 /* CPLD Register 0 bits to control ATA */
 #define DM646X_EVM_ATA_RST		BIT(0)
 #define DM646X_EVM_ATA_PWD		BIT(1)
@@ -316,6 +317,7 @@ static struct at24_platform_data eeprom_info = {
 	.setup          = davinci_get_mac_addr,
 	.context	= (void *)0x7f00,
 };
+#endif
 
 static u8 dm646x_iis_serializer_direction[] = {
        TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
@@ -346,6 +348,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 	},
 };
 
+#ifdef CONFIG_I2C
 static struct i2c_client *cpld_client;
 
 static int cpld_video_probe(struct i2c_client *client,
@@ -710,6 +713,7 @@ static void __init evm_init_i2c(void)
 	evm_init_cpld();
 	evm_init_video();
 }
+#endif
 
 #define DM6467T_EVM_REF_FREQ		33000000
 
@@ -764,7 +768,10 @@ static __init void evm_init(void)
 	if (ret)
 		pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
 
+#ifdef CONFIG_I2C
 	evm_init_i2c();
+#endif
+
 	davinci_serial_init(dm646x_serial_device);
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 8cfbfe084535..d97c588550ad 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -26,7 +26,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
@@ -51,6 +51,7 @@ struct factory_config {
 
 static struct factory_config factory_config;
 
+#ifdef CONFIG_CPU_FREQ
 struct part_no_info {
 	const char	*part_no;	/* part number string of interest */
 	int		max_freq;	/* khz */
@@ -87,7 +88,6 @@ static struct part_no_info mityomapl138_pn_info[] = {
 	},
 };
 
-#ifdef CONFIG_CPU_FREQ
 static void mityomapl138_cpufreq_init(const char *partnum)
 {
 	int i, ret;
@@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum)
 static void mityomapl138_cpufreq_init(const char *partnum) { }
 #endif
 
-static void read_factory_config(struct memory_accessor *a, void *context)
+static void read_factory_config(struct nvmem_device *nvmem, void *context)
 {
 	int ret;
 	const char *partnum = NULL;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
+	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
+				&factory_config);
 	if (ret != sizeof(struct factory_config)) {
 		pr_warn("Read Factory Config Failed: %d\n", ret);
 		goto bad_config;
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 2aac51d0e853..ee624861ca66 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -19,7 +19,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 #include <mach/mux.h>
 
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index c70bb0a4dfb4..3424eac6b588 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -23,7 +23,7 @@
 #include <mach/hardware.h>
 
 #include <mach/clock.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/cputype.h>
 #include "clock.h"
 
@@ -97,7 +97,9 @@ int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 
-	if (clk == NULL || IS_ERR(clk))
+	if (!clk)
+		return 0;
+	else if (IS_ERR(clk))
 		return -EINVAL;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
@@ -124,7 +126,7 @@ EXPORT_SYMBOL(clk_disable);
 unsigned long clk_get_rate(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
+		return 0;
 
 	return clk->rate;
 }
@@ -159,8 +161,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	unsigned long flags;
 	int ret = -EINVAL;
 
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
+	if (!clk)
+		return 0;
+	else if (IS_ERR(clk))
+		return -EINVAL;
 
 	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
@@ -181,7 +185,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 {
 	unsigned long flags;
 
-	if (clk == NULL || IS_ERR(clk))
+	if (!clk)
+		return 0;
+	else if (IS_ERR(clk))
 		return -EINVAL;
 
 	/* Cannot change parent on enabled clock */
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index a794f6d9d444..f55ef2ef2f92 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
 {
 	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
 	off_t offset = (off_t)context;
 
 	/* Read MAC addr from EEPROM */
-	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
 }
 
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 507aad4b8dd9..1a68d2477de6 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -19,7 +19,7 @@
 #include <linux/of_irq.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 
 static inline unsigned int cp_intc_read(unsigned offset)
 {
diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/cp_intc.h
index 827bbe9baed4..827bbe9baed4 100644
--- a/arch/arm/mach-davinci/include/mach/cp_intc.h
+++ b/arch/arm/mach-davinci/cp_intc.h
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index 306ebc51599a..1b8f08532455 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,8 +19,8 @@
 #include <linux/export.h>
 #include <asm/cpuidle.h>
 
-#include <mach/cpuidle.h>
-#include <mach/ddr2.h>
+#include "cpuidle.h"
+#include "ddr2.h"
 
 #define DAVINCI_CPUIDLE_MAX_STATES	2
 
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h
index 74f088b0edfb..74f088b0edfb 100644
--- a/arch/arm/mach-davinci/include/mach/cpuidle.h
+++ b/arch/arm/mach-davinci/cpuidle.h
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 115d5736da80..7187e7fc2822 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -15,7 +15,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 676997895e13..97d8779a9a65 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -22,7 +22,7 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 06b6451225c1..c4b5808ca7c1 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -15,7 +15,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/cp_intc.h>
+#include "cp_intc.h"
 #include <mach/da8xx.h>
 
 #define DA8XX_NUM_UARTS	3
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/ddr2.h
index c19e047d0e6a..c19e047d0e6a 100644
--- a/arch/arm/mach-davinci/include/mach/ddr2.h
+++ b/arch/arm/mach-davinci/ddr2.h
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 29e08aac8294..725e693639d2 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -17,13 +17,14 @@
 #include <linux/ahci_platform.h>
 #include <linux/clk.h>
 #include <linux/reboot.h>
+#include <linux/dmaengine.h>
 
 #include <mach/cputype.h>
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/cpuidle.h>
-#include <mach/sram.h>
+#include "cpuidle.h"
+#include "sram.h"
 
 #include "clock.h"
 #include "asp.h"
@@ -147,150 +148,163 @@ static s8 da850_queue_priority_mapping[][2] = {
 	{-1, -1}
 };
 
-static struct edma_soc_info da830_edma_cc0_info = {
+static struct edma_soc_info da8xx_edma0_pdata = {
 	.queue_priority_mapping	= da8xx_queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
 };
 
-static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = {
-	&da830_edma_cc0_info,
+static struct edma_soc_info da850_edma1_pdata = {
+	.queue_priority_mapping	= da850_queue_priority_mapping,
+	.default_queue		= EVENTQ_0,
 };
 
-static struct edma_soc_info da850_edma_cc_info[] = {
+static struct resource da8xx_edma0_resources[] = {
 	{
-		.queue_priority_mapping	= da8xx_queue_priority_mapping,
-		.default_queue		= EVENTQ_1,
-	},
-	{
-		.queue_priority_mapping	= da850_queue_priority_mapping,
-		.default_queue		= EVENTQ_0,
-	},
-};
-
-static struct edma_soc_info *da850_edma_info[EDMA_MAX_CC] = {
-	&da850_edma_cc_info[0],
-	&da850_edma_cc_info[1],
-};
-
-static struct resource da830_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= DA8XX_TPCC_BASE,
 		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= DA8XX_TPTC0_BASE,
 		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= DA8XX_TPTC1_BASE,
 		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA8XX_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA8XX_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct resource da850_edma_resources[] = {
-	{
-		.name	= "edma_cc0",
-		.start	= DA8XX_TPCC_BASE,
-		.end	= DA8XX_TPCC_BASE + SZ_32K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
+static struct resource da850_edma1_resources[] = {
 	{
-		.name	= "edma_tc0",
-		.start	= DA8XX_TPTC0_BASE,
-		.end	= DA8XX_TPTC0_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_tc1",
-		.start	= DA8XX_TPTC1_BASE,
-		.end	= DA8XX_TPTC1_BASE + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "edma_cc1",
+		.name	= "edma3_cc",
 		.start	= DA850_TPCC1_BASE,
 		.end	= DA850_TPCC1_BASE + SZ_32K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc0",
 		.start	= DA850_TPTC2_BASE,
 		.end	= DA850_TPTC2_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
-		.start	= IRQ_DA8XX_CCINT0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma0_err",
-		.start	= IRQ_DA8XX_CCERRINT,
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "edma1",
+		.name	= "edma3_ccint",
 		.start	= IRQ_DA850_CCINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma1_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_DA850_CCERRINT1,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device da830_edma_device = {
+static const struct platform_device_info da8xx_edma0_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da830_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da830_edma_resources),
-	.resource	= da830_edma_resources,
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da8xx_edma0_resources,
+	.num_res	= ARRAY_SIZE(da8xx_edma0_resources),
+	.data		= &da8xx_edma0_pdata,
+	.size_data	= sizeof(da8xx_edma0_pdata),
 };
 
-static struct platform_device da850_edma_device = {
+static const struct platform_device_info da850_edma1_device __initconst = {
 	.name		= "edma",
-	.id		= -1,
-	.dev = {
-		.platform_data = da850_edma_info,
-	},
-	.num_resources	= ARRAY_SIZE(da850_edma_resources),
-	.resource	= da850_edma_resources,
+	.id		= 1,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= da850_edma1_resources,
+	.num_res	= ARRAY_SIZE(da850_edma1_resources),
+	.data		= &da850_edma1_pdata,
+	.size_data	= sizeof(da850_edma1_pdata),
+};
+
+static const struct dma_slave_map da830_edma_map[] = {
+	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
+	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
+	{ "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
+	{ "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
+	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
+	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
 };
 
 int __init da830_register_edma(struct edma_rsv_info *rsv)
 {
-	da830_edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	da8xx_edma0_pdata.rsv = rsv;
+
+	da8xx_edma0_pdata.slave_map = da830_edma_map;
+	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
 
-	return platform_device_register(&da830_edma_device);
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
+static const struct dma_slave_map da850_edma0_map[] = {
+	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
+	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
+	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 4) },
+	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 5) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
+	{ "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
+	{ "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
+};
+
+static const struct dma_slave_map da850_edma1_map[] = {
+	{ "da830-mmc.1", "rx", EDMA_FILTER_PARAM(1, 28) },
+	{ "da830-mmc.1", "tx", EDMA_FILTER_PARAM(1, 29) },
+};
+
 int __init da850_register_edma(struct edma_rsv_info *rsv[2])
 {
+	struct platform_device *edma_pdev;
+
 	if (rsv) {
-		da850_edma_cc_info[0].rsv = rsv[0];
-		da850_edma_cc_info[1].rsv = rsv[1];
+		da8xx_edma0_pdata.rsv = rsv[0];
+		da850_edma1_pdata.rsv = rsv[1];
+	}
+
+	da8xx_edma0_pdata.slave_map = da850_edma0_map;
+	da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da850_edma0_map);
+
+	edma_pdev = platform_device_register_full(&da8xx_edma0_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA0\n", __func__);
+		return PTR_ERR(edma_pdev);
 	}
 
-	return platform_device_register(&da850_edma_device);
+	da850_edma1_pdata.slave_map = da850_edma1_map;
+	da850_edma1_pdata.slavecnt = ARRAY_SIZE(da850_edma1_map);
+
+	edma_pdev = platform_device_register_full(&da850_edma1_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 static struct resource da8xx_i2c_resources0[] = {
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 567dc56fe8cd..a0ecf499c2f2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,6 +13,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -21,7 +22,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/time.h>
@@ -569,61 +570,77 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static const struct dma_slave_map dm355_edma_map[] = {
+	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci-mcbsp.1", "tx", EDMA_FILTER_PARAM(0, 8) },
+	{ "davinci-mcbsp.1", "rx", EDMA_FILTER_PARAM(0, 9) },
+	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
+	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
+	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
+	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
+	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
+	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
+};
+
+static struct edma_soc_info dm355_edma_pdata = {
 	.queue_priority_mapping	= queue_priority_mapping,
 	.default_queue		= EVENTQ_1,
-};
-
-static struct edma_soc_info *dm355_edma_info[EDMA_MAX_CC] = {
-       &edma_cc0_info,
+	.slave_map		= dm355_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm355_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using (or muxing) TC*_ERR */
 };
 
-static struct platform_device dm355_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm355_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm355_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm355_edma_pdata,
+	.size_data	= sizeof(dm355_edma_pdata),
 };
 
 static struct resource dm355_asp1_resources[] = {
@@ -1062,13 +1079,18 @@ int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm355_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
-	platform_device_register(&dm355_edma_device);
+	edma_pdev = platform_device_register_full(&dm355_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	ret = davinci_init_wdt();
 	if (ret)
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 6a890a8486d0..384d3674dd9b 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,6 +17,7 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/spi/spi.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -26,7 +27,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/time.h>
@@ -853,8 +854,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 };
 
 /* Four Transfer Controllers on DM365 */
-static s8
-dm365_queue_priority_mapping[][2] = {
+static s8 dm365_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 7},
 	{1, 7},
@@ -863,53 +863,70 @@ dm365_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
+static const struct dma_slave_map dm365_edma_map[] = {
+	{ "davinci-mcbsp.0", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp.0", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "davinci_voicecodec", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci_voicecodec", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "spi_davinci.2", "tx", EDMA_FILTER_PARAM(0, 10) },
+	{ "spi_davinci.2", "rx", EDMA_FILTER_PARAM(0, 11) },
+	{ "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 14) },
+	{ "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 15) },
+	{ "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 17) },
+	{ "spi_davinci.3", "tx", EDMA_FILTER_PARAM(0, 18) },
+	{ "spi_davinci.3", "rx", EDMA_FILTER_PARAM(0, 19) },
+	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
+	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
+	{ "dm6441-mmc.1", "rx", EDMA_FILTER_PARAM(0, 30) },
+	{ "dm6441-mmc.1", "tx", EDMA_FILTER_PARAM(0, 31) },
+};
+
+static struct edma_soc_info dm365_edma_pdata = {
 	.queue_priority_mapping	= dm365_queue_priority_mapping,
 	.default_queue		= EVENTQ_3,
-};
-
-static struct edma_soc_info *dm365_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
+	.slave_map		= dm365_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm365_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
@@ -919,7 +936,7 @@ static struct resource edma_resources[] = {
 static struct platform_device dm365_edma_device = {
 	.name			= "edma",
 	.id			= 0,
-	.dev.platform_data	= dm365_edma_info,
+	.dev.platform_data	= &dm365_edma_pdata,
 	.num_resources		= ARRAY_SIZE(edma_resources),
 	.resource		= edma_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index dc52657909c4..b4b3a8b9ca20 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
+#include <linux/dmaengine.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/gpio-davinci.h>
@@ -19,7 +20,7 @@
 
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/time.h>
 #include <mach/serial.h>
@@ -498,61 +499,69 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 
 /*----------------------------------------------------------------------*/
 
-static s8
-queue_priority_mapping[][2] = {
+static s8 queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 3},
 	{1, 7},
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
-	.queue_priority_mapping	= queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
+static const struct dma_slave_map dm644x_edma_map[] = {
+	{ "davinci-mcbsp", "tx", EDMA_FILTER_PARAM(0, 2) },
+	{ "davinci-mcbsp", "rx", EDMA_FILTER_PARAM(0, 3) },
+	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
+	{ "dm6441-mmc.0", "rx", EDMA_FILTER_PARAM(0, 26) },
+	{ "dm6441-mmc.0", "tx", EDMA_FILTER_PARAM(0, 27) },
 };
 
-static struct edma_soc_info *dm644x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
+static struct edma_soc_info dm644x_edma_pdata = {
+	.queue_priority_mapping	= queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
+	.slave_map		= dm644x_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm644x_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm644x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm644x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm644x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm644x_edma_pdata,
+	.size_data	= sizeof(dm644x_edma_pdata),
 };
 
 /* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
@@ -950,12 +959,17 @@ int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,
 
 static int __init dm644x_init_devices(void)
 {
+	struct platform_device *edma_pdev;
 	int ret = 0;
 
 	if (!cpu_is_davinci_dm644x())
 		return 0;
 
-	platform_device_register(&dm644x_edma_device);
+	edma_pdev = platform_device_register_full(&dm644x_edma_device);
+	if (IS_ERR(edma_pdev)) {
+		pr_warn("%s: Failed to register eDMA\n", __func__);
+		return PTR_ERR(edma_pdev);
+	}
 
 	platform_device_register(&dm644x_mdio_device);
 	platform_device_register(&dm644x_emac_device);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 3f842bb266d6..a43db0f5fbaa 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -9,6 +9,7 @@
  * or implied.
  */
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -20,7 +21,7 @@
 
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/psc.h>
+#include "psc.h"
 #include <mach/mux.h>
 #include <mach/time.h>
 #include <mach/serial.h>
@@ -531,8 +532,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 /*----------------------------------------------------------------------*/
 
 /* Four Transfer Controllers on DM646x */
-static s8
-dm646x_queue_priority_mapping[][2] = {
+static s8 dm646x_queue_priority_mapping[][2] = {
 	/* {event queue no, Priority} */
 	{0, 4},
 	{1, 0},
@@ -541,65 +541,73 @@ dm646x_queue_priority_mapping[][2] = {
 	{-1, -1},
 };
 
-static struct edma_soc_info edma_cc0_info = {
-	.queue_priority_mapping	= dm646x_queue_priority_mapping,
-	.default_queue		= EVENTQ_1,
+static const struct dma_slave_map dm646x_edma_map[] = {
+	{ "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 6) },
+	{ "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 9) },
+	{ "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 12) },
+	{ "spi_davinci", "tx", EDMA_FILTER_PARAM(0, 16) },
+	{ "spi_davinci", "rx", EDMA_FILTER_PARAM(0, 17) },
 };
 
-static struct edma_soc_info *dm646x_edma_info[EDMA_MAX_CC] = {
-	&edma_cc0_info,
+static struct edma_soc_info dm646x_edma_pdata = {
+	.queue_priority_mapping	= dm646x_queue_priority_mapping,
+	.default_queue		= EVENTQ_1,
+	.slave_map		= dm646x_edma_map,
+	.slavecnt		= ARRAY_SIZE(dm646x_edma_map),
 };
 
 static struct resource edma_resources[] = {
 	{
-		.name	= "edma_cc0",
+		.name	= "edma3_cc",
 		.start	= 0x01c00000,
 		.end	= 0x01c00000 + SZ_64K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc0",
+		.name	= "edma3_tc0",
 		.start	= 0x01c10000,
 		.end	= 0x01c10000 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc1",
+		.name	= "edma3_tc1",
 		.start	= 0x01c10400,
 		.end	= 0x01c10400 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc2",
+		.name	= "edma3_tc2",
 		.start	= 0x01c10800,
 		.end	= 0x01c10800 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma_tc3",
+		.name	= "edma3_tc3",
 		.start	= 0x01c10c00,
 		.end	= 0x01c10c00 + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.name	= "edma0",
+		.name	= "edma3_ccint",
 		.start	= IRQ_CCINT0,
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
-		.name	= "edma0_err",
+		.name	= "edma3_ccerrint",
 		.start	= IRQ_CCERRINT,
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* not using TC*_ERR */
 };
 
-static struct platform_device dm646x_edma_device = {
-	.name			= "edma",
-	.id			= 0,
-	.dev.platform_data	= dm646x_edma_info,
-	.num_resources		= ARRAY_SIZE(edma_resources),
-	.resource		= edma_resources,
+static const struct platform_device_info dm646x_edma_device __initconst = {
+	.name		= "edma",
+	.id		= 0,
+	.dma_mask	= DMA_BIT_MASK(32),
+	.res		= edma_resources,
+	.num_res	= ARRAY_SIZE(edma_resources),
+	.data		= &dm646x_edma_pdata,
+	.size_data	= sizeof(dm646x_edma_pdata),
 };
 
 static struct resource dm646x_mcasp0_resources[] = {
@@ -936,9 +944,12 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config,
 
 int __init dm646x_init_edma(struct edma_rsv_info *rsv)
 {
-	edma_cc0_info.rsv = rsv;
+	struct platform_device *edma_pdev;
+
+	dm646x_edma_pdata.rsv = rsv;
 
-	return platform_device_register(&dm646x_edma_device);
+	edma_pdev = platform_device_register_full(&dm646x_edma_device);
+	return IS_ERR(edma_pdev) ? PTR_ERR(edma_pdev) : 0;
 }
 
 void __init dm646x_init(void)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 8fb97b93b6bb..53b456a5bbe0 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -30,7 +30,7 @@
 u32 *uart;
 
 /* PORT_16C550A, in polled non-fifo mode */
-static void putc(char c)
+static inline void putc(char c)
 {
 	if (!uart)
 		return;
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index 07e23ba61f3a..8929569b1f8a 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -21,7 +21,7 @@
 
 #include <mach/common.h>
 #include <mach/da8xx.h>
-#include <mach/sram.h>
+#include "sram.h"
 #include <mach/pm.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 82fdc69d5728..e5dc6bfde5f3 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/cputype.h>
-#include <mach/psc.h>
+#include "psc.h"
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/psc.h
index 99d47cfa301f..99d47cfa301f 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/psc.h
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index a5336a5e2739..cd350dee4df3 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -21,8 +21,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <mach/psc.h>
-#include <mach/ddr2.h>
+#include "psc.h"
+#include "ddr2.h"
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index 8540dddf1fbd..668b6e749768 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -14,7 +14,7 @@
 #include <linux/genalloc.h>
 
 #include <mach/common.h>
-#include <mach/sram.h>
+#include "sram.h"
 
 static struct gen_pool *sram_pool;
 
diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/sram.h
index 4e5db56218b8..4e5db56218b8 100644
--- a/arch/arm/mach-davinci/include/mach/sram.h
+++ b/arch/arm/mach-davinci/sram.h
diff --git a/arch/arm/mach-digicolor/Kconfig b/arch/arm/mach-digicolor/Kconfig
index 4f36d8d2bc57..fc65b0f1db48 100644
--- a/arch/arm/mach-digicolor/Kconfig
+++ b/arch/arm/mach-digicolor/Kconfig
@@ -1,7 +1,10 @@
 config ARCH_DIGICOLOR
 	bool "Conexant Digicolor SoC Support"
 	depends on ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select DIGICOLOR_TIMER
 	select GENERIC_IRQ_CHIP
 	select MFD_SYSCON
+	select PINCTRL
+	select PINCTRL_DIGICOLOR
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index d8c439c89ea9..0bd6d894c597 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -8,7 +8,7 @@ config DOVE_LEGACY
 config MACH_DOVE_DB
 	bool "Marvell DB-MV88AP510 Development Board"
 	select DOVE_LEGACY
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-MV88AP510 Development Board.
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 0dc39cf30fdd..b9a7c33db29a 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -88,6 +88,7 @@ static void __init cm_a510_init(void)
 
 MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= cm_a510_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 0d1a89298ece..0cdaa3851d2e 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -16,6 +16,7 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_device.h>
+#include <linux/soc/dove/pmu.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -375,6 +376,47 @@ void __init dove_setup_cpu_wins(void)
 				    DOVE_SCRATCHPAD_SIZE);
 }
 
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
+static void __init __maybe_unused orion_wdt_init(void)
+{
+	platform_device_register(&orion_wdt_device);
+}
+
+static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = {
+	{
+		.pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_VIDEO_MASK,
+		.iso_mask = PMU_ISO_VIDEO_MASK,
+		.name = "vpu-domain",
+	}, {
+		.pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_GPU_MASK,
+		.iso_mask = PMU_ISO_GPU_MASK,
+		.name = "gpu-domain",
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct dove_pmu_initdata pmu_data __initconst = {
+	.pmc_base = DOVE_PMU_VIRT_BASE,
+	.pmu_base = DOVE_PMU_VIRT_BASE + 0x8000,
+	.irq = IRQ_DOVE_PMU,
+	.irq_domain_start = IRQ_DOVE_PMU_START,
+	.domains = pmu_domains,
+};
+
 void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
@@ -389,6 +431,7 @@ void __init dove_init(void)
 	dove_clk_init();
 
 	/* internal devices that every board has */
+	dove_init_pmu_legacy(&pmu_data);
 	dove_rtc_init();
 	dove_xor0_init();
 	dove_xor1_init();
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 76e26f949c27..bcb678fd2415 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,6 +94,7 @@ static void __init dove_db_init(void)
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index 0c4b35f4ee5b..00f45458b3ec 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
 
+#include <mach/irqs.h>
+
 /*
  * Marvell Dove address maps.
  *
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
deleted file mode 100644
index 72d622baaad3..000000000000
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Dove platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #63
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
index 3f29e6bca058..8ff0fa8b4fcd 100644
--- a/arch/arm/mach-dove/include/mach/irqs.h
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -90,7 +90,7 @@
 #define NR_PMU_IRQS		7
 #define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
 
-#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+#define DOVE_NR_IRQS		(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
 
 
 #endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
index b47f75038686..d22b9b174007 100644
--- a/arch/arm/mach-dove/include/mach/pm.h
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -51,22 +51,14 @@
 #define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
-#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
 
-static inline int pmu_to_irq(int pin)
-{
-	if (pin < NR_PMU_IRQS)
-		return pin + IRQ_DOVE_PMU_START;
+#define  PMU_SW_RST_VIDEO_MASK		BIT(16)
+#define  PMU_SW_RST_GPU_MASK		BIT(18)
 
-	return -EINVAL;
-}
+#define  PMU_PWR_GPU_PWR_DWN_MASK	BIT(2)
+#define  PMU_PWR_VPU_PWR_DWN_MASK	BIT(3)
 
-static inline int irq_to_pmu(int irq)
-{
-	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
-		return irq - IRQ_DOVE_PMU_START;
-
-	return -EINVAL;
-}
+#define  PMU_ISO_VIDEO_MASK		BIT(0)
+#define  PMU_ISO_GPU_MASK		BIT(1)
 
 #endif
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index bfb3703357c5..d6627c1f7f30 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -7,87 +7,15 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
-#include <asm/mach/arch.h>
+#include <asm/exception.h>
 #include <plat/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 
-static void pmu_irq_mask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u &= ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_unmask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u |= 1 << (pin & 31);
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_ack(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	/*
-	 * The PMU mask register is not RW0C: it is RW.  This means that
-	 * the bits take whatever value is written to them; if you write
-	 * a '1', you will set the interrupt.
-	 *
-	 * Unfortunately this means there is NO race free way to clear
-	 * these interrupts.
-	 *
-	 * So, let's structure the code so that the window is as small as
-	 * possible.
-	 */
-	u = ~(1 << (pin & 31));
-	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
-	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
-}
-
-static struct irq_chip pmu_irq_chip = {
-	.name		= "pmu_irq",
-	.irq_mask	= pmu_irq_mask,
-	.irq_unmask	= pmu_irq_unmask,
-	.irq_ack	= pmu_irq_ack,
-};
-
-static void pmu_irq_handler(struct irq_desc *desc)
-{
-	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
-	unsigned int irq;
-
-	cause &= readl(PMU_INTERRUPT_MASK);
-	if (cause == 0) {
-		do_bad_IRQ(desc);
-		return;
-	}
-
-	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
-		if (!(cause & (1 << irq)))
-			continue;
-		irq = pmu_to_irq(irq);
-		generic_handle_irq(irq);
-	}
-}
-
 static int __initdata gpio0_irqs[4] = {
 	IRQ_DOVE_GPIO_0_7,
 	IRQ_DOVE_GPIO_8_15,
@@ -109,14 +37,6 @@ static int __initdata gpio2_irqs[4] = {
 	0,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
 static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
 
 static asmlinkage void
@@ -139,18 +59,13 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init dove_init_irq(void)
 {
-	int i;
-
 	orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(dove_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
@@ -163,17 +78,4 @@ void __init dove_init_irq(void)
 
 	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
-
-	/*
-	 * Mask and clear PMU interrupts
-	 */
-	writel(0, PMU_INTERRUPT_MASK);
-	writel(0, PMU_INTERRUPT_CAUSE);
-
-	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
-	irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
 }
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index c4904264256a..b2db791b3b38 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -49,7 +49,7 @@
 static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 				      unsigned int ctrl)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	static u16 nand_state = SNAPPERCL15_NAND_WPN;
 	u16 set;
 
@@ -76,7 +76,7 @@ static void snappercl15_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 
 static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
 	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
 }
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 61f4b5dc4d7d..45b81a2bcd4b 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -74,7 +74,7 @@ static void __init ts72xx_map_io(void)
 static void ts72xx_nand_hwcontrol(struct mtd_info *mtd,
 				  int cmd, unsigned int ctrl)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		void __iomem *addr = chip->IO_ADDR_R;
@@ -96,7 +96,7 @@ static void ts72xx_nand_hwcontrol(struct mtd_info *mtd,
 
 static int ts72xx_nand_device_ready(struct mtd_info *mtd)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	void __iomem *addr = chip->IO_ADDR_R;
 
 	addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 3a10f1a8317a..207fa2c737a6 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -5,10 +5,11 @@
 #
 # Licensed under GPLv2
 
-# Configuration options for the EXYNOS4
+# Configuration options for the EXYNOS
 
 menuconfig ARCH_EXYNOS
-	bool "Samsung EXYNOS" if ARCH_MULTI_V7
+	bool "Samsung EXYNOS"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
@@ -16,6 +17,7 @@ menuconfig ARCH_EXYNOS
 	select ARM_GIC
 	select COMMON_CLK_SAMSUNG
 	select EXYNOS_THERMAL
+	select EXYNOS_PMU
 	select HAVE_ARM_SCU if SMP
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -24,9 +26,15 @@ menuconfig ARCH_EXYNOS
 	select PINCTRL_EXYNOS
 	select PM_GENERIC_DOMAINS if PM
 	select S5P_DEV_MFC
+	select SOC_SAMSUNG
 	select SRAM
 	select THERMAL
+	select THERMAL_OF
 	select MFD_SYSCON
+	select CLKSRC_EXYNOS_MCT
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	select POWER_RESET_SYSCON_POWEROFF
 	help
 	  Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
 
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 2f306767cdfe..34d29df3e006 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -9,7 +9,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)
 
 # Core
 
-obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o pmu.o exynos-smc.o firmware.o
+obj-$(CONFIG_ARCH_EXYNOS)	+= exynos.o exynos-smc.o firmware.o
 
 obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
 obj-$(CONFIG_PM_SLEEP)		+= suspend.o
diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot
deleted file mode 100644
index b9862e22bf10..000000000000
--- a/arch/arm/mach-exynos/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x40008000
-params_phys-y	:= 0x40000100
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 153492513c40..5365bf1f586a 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,6 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-#include <linux/of.h>
 #include <linux/platform_data/cpuidle-exynos.h>
 
 #define EXYNOS3250_SOC_ID	0xE3472000
@@ -149,7 +148,7 @@ static inline void exynos_pm_init(void) {}
 extern void exynos_cpu_resume(void);
 extern void exynos_cpu_resume_ns(void);
 
-extern struct smp_operations exynos_smp_ops;
+extern const struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_power_down(int cpu);
 extern void exynos_cpu_power_up(int cpu);
diff --git a/arch/arm/mach-exynos/exynos-pmu.h b/arch/arm/mach-exynos/exynos-pmu.h
deleted file mode 100644
index a2ab0d52b230..000000000000
--- a/arch/arm/mach-exynos/exynos-pmu.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header for EXYNOS PMU Driver support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __EXYNOS_PMU_H
-#define __EXYNOS_PMU_H
-
-enum sys_powerdown {
-	SYS_AFTR,
-	SYS_LPA,
-	SYS_SLEEP,
-	NUM_SYS_POWERDOWN,
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-
-#endif /* __EXYNOS_PMU_H */
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 1c47aee31e9c..bbf51a46f772 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -11,29 +11,23 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/serial_s3c.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/pm_domain.h>
 #include <linux/irqchip.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/memory.h>
 
 #include <mach/map.h>
 
 #include "common.h"
 #include "mfc.h"
-#include "regs-pmu.h"
-
-void __iomem *pmu_base_addr;
 
 static struct map_desc exynos4_iodesc[] __initdata = {
 	{
@@ -70,11 +64,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_CMU),
-		.length		= 144 * SZ_1K,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -230,6 +219,10 @@ static const struct of_device_id exynos_cpufreq_matches[] = {
 	{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
 	{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
 	{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
+#ifndef CONFIG_BL_SWITCHER
+	{ .compatible = "samsung,exynos5420", .data = "cpufreq-dt" },
+	{ .compatible = "samsung,exynos5800", .data = "cpufreq-dt" },
+#endif
 	{ /* sentinel */ }
 };
 
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 111cfbf66fdb..1bfd1b0bd9dc 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -20,8 +20,6 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/suspend.h>
 
-#include <mach/map.h>
-
 #include "common.h"
 #include "smc.h"
 
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index de3ae59e1cfb..c88325d56743 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -2,7 +2,7 @@
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com/
  *
- * EXYNOS4 - Memory map definitions
+ * EXYNOS - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,30 +14,18 @@
 
 #include <plat/map-base.h>
 
-/*
- * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400.
- * So need to define it, and here is to avoid redefinition warning.
- */
-#define S3C_UART_OFFSET			(0x10000)
-
 #include <plat/map-s5p.h>
 
 #define EXYNOS_PA_CHIPID		0x10000000
 
 #define EXYNOS4_PA_CMU			0x10030000
-#define EXYNOS5_PA_CMU			0x10010000
 
 #define EXYNOS4_PA_DMC0			0x10400000
 #define EXYNOS4_PA_DMC1			0x10410000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
-#define EXYNOS4_PA_L2CC			0x10502000
 
 #define EXYNOS4_PA_SROMC		0x12570000
 #define EXYNOS5_PA_SROMC		0x12250000
 
-/* Compatibility UART */
-
-#define EXYNOS5440_PA_UART0		0x000B0000
-
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index 56978199c479..f086bf615b29 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -16,13 +16,13 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/syscore_ops.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cputype.h>
 #include <asm/cp15.h>
 #include <asm/mcpm.h>
 #include <asm/smp_plat.h>
 
-#include "regs-pmu.h"
 #include "common.h"
 
 #define EXYNOS5420_CPUS_PER_CLUSTER	4
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 98a2c0cbb833..85c3be63d644 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -15,11 +15,11 @@
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
@@ -30,7 +30,6 @@
 #include <mach/map.h>
 
 #include "common.h"
-#include "regs-pmu.h"
 
 extern void exynos4_secondary_startup(void);
 
@@ -479,7 +478,7 @@ static void exynos_cpu_die(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-struct smp_operations exynos_smp_ops __initdata = {
+const struct smp_operations exynos_smp_ops __initconst = {
 	.smp_init_cpus		= exynos_smp_init_cpus,
 	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
 	.smp_secondary_init	= exynos_secondary_init,
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 9c1506b499bc..c43b776a51a3 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -17,7 +17,9 @@
 #include <linux/suspend.h>
 #include <linux/cpu_pm.h>
 #include <linux/io.h>
-#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
 
 #include <asm/firmware.h>
 #include <asm/smp_scu.h>
@@ -26,11 +28,7 @@
 
 #include <mach/map.h>
 
-#include <plat/pm-common.h>
-
 #include "common.h"
-#include "exynos-pmu.h"
-#include "regs-pmu.h"
 
 static inline void __iomem *exynos_boot_vector_addr(void)
 {
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
deleted file mode 100644
index de68938ee6aa..000000000000
--- a/arch/arm/mach-exynos/pmu.c
+++ /dev/null
@@ -1,1004 +0,0 @@
-/*
- * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * EXYNOS - CPU PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-
-
-#include "exynos-pmu.h"
-#include "regs-pmu.h"
-
-#define PMU_TABLE_END	(-1U)
-
-struct exynos_pmu_conf {
-	unsigned int offset;
-	u8 val[NUM_SYS_POWERDOWN];
-};
-
-struct exynos_pmu_data {
-	const struct exynos_pmu_conf *pmu_config;
-	const struct exynos_pmu_conf *pmu_config_extra;
-
-	void (*pmu_init)(void);
-	void (*powerdown_conf)(enum sys_powerdown);
-	void (*powerdown_conf_extra)(enum sys_powerdown);
-};
-
-struct exynos_pmu_context {
-	struct device *dev;
-	const struct exynos_pmu_data *pmu_data;
-};
-
-static void __iomem *pmu_base_addr;
-static struct exynos_pmu_context *pmu_context;
-
-static inline void pmu_raw_writel(u32 val, u32 offset)
-{
-	writel_relaxed(val, pmu_base_addr + offset);
-}
-
-static inline u32 pmu_raw_readl(u32 offset)
-{
-	return readl_relaxed(pmu_base_addr + offset);
-}
-
-static struct exynos_pmu_conf exynos3250_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
-	{ EXYNOS3_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
-	{ EXYNOS3_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
-	{ EXYNOS3_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS3_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS3_ARM_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x3} },
-	{ EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS3_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS3_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
-	{ EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG,		{ 0x3, 0x3, 0x3} },
-	{ EXYNOS3_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
-	{ EXYNOS3_CAM_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_LCD0_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_MAUDIO_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
-	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
-	{ S5P_L2_0_LOWPWR,			{ 0x2, 0x2, 0x3 } },
-	{ S5P_L2_1_LOWPWR,			{ 0x2, 0x2, 0x3 } },
-	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_LCD1_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
-	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_MODIMIF_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_PCIE_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SATA_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD1_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
-	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos4x12_pmu_config[] = {
-	{ S5P_ARM_CORE0_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL0,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE1_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL1,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ISP_ARM_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR,	{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_COMMON_LOWPWR,		{ 0x0, 0x0, 0x2 } },
-	{ S5P_L2_0_LOWPWR,			{ 0x0, 0x0, 0x3 } },
-	/* XXX_OPTION register should be set other field */
-	{ S5P_ARM_L2_0_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_L2_1_LOWPWR,			{ 0x0, 0x0, 0x3 } },
-	{ S5P_ARM_L2_1_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_CMU_ACLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_DRAM_FREQ_DOWN_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_DDRPHY_DLLOFF_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_LPDDR_PHY_DLL_LOCK_LOWPWR,	{ 0x1, 0x1, 0x1 } },
-	{ S5P_CMU_ACLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SCLKSTOP_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_COREBLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_APLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_MPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_VPLL_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_EPLL_SYSCLK_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_MPLLUSER_SYSCLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_GPSALIVE_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_CLKSTOP_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_CAM_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_TV_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_MFC_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_G3D_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_LCD0_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_RESET_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_CMU_RESET_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_TOP_BUS_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_LOWPWR,			{ 0x3, 0x0, 0x3 } },
-	{ S5P_TOP_BUS_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_TOP_RETENTION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
-	{ S5P_TOP_PWR_COREBLK_LOWPWR,		{ 0x3, 0x0, 0x3 } },
-	{ S5P_LOGIC_RESET_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_OSCCLK_GATE_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_LOGIC_RESET_COREBLK_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_OSCCLK_GATE_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x1 } },
-	{ S5P_ONENAND_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_ONENAND_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_HSI_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSI_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_G2D_ACP_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_G2D_ACP_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_USBOTG_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_USBOTG_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_HSMMC_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_HSMMC_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_CSSYS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_CSSYS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_SECSS_MEM_LOWPWR,			{ 0x3, 0x0, 0x0 } },
-	{ S5P_SECSS_MEM_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ S5P_ROTATOR_MEM_LOWPWR,		{ 0x3, 0x0, 0x0 } },
-	{ S5P_ROTATOR_MEM_OPTION,		{ 0x10, 0x10, 0x0 } },
-	{ S5P_PAD_RETENTION_DRAM_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MAUDIO_LOWPWR,	{ 0x1, 0x1, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_UART_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_MMCB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIA_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_EBIB_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ISOLATION_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_ISOLATION_COREBLK_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_PAD_RETENTION_ALV_SEL_LOWPWR,	{ 0x1, 0x0, 0x0 } },
-	{ S5P_XUSBXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_XXTI_LOWPWR,			{ 0x1, 0x1, 0x0 } },
-	{ S5P_EXT_REGULATOR_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_GPIO_MODE_LOWPWR,			{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_COREBLK_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_GPIO_MODE_MAUDIO_LOWPWR,		{ 0x1, 0x1, 0x0 } },
-	{ S5P_TOP_ASB_RESET_LOWPWR,		{ 0x1, 0x1, 0x1 } },
-	{ S5P_TOP_ASB_ISOLATION_LOWPWR,		{ 0x1, 0x0, 0x1 } },
-	{ S5P_CAM_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_TV_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MFC_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_G3D_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_LCD0_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_ISP_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_MAUDIO_LOWPWR,			{ 0x7, 0x7, 0x0 } },
-	{ S5P_GPS_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_GPS_ALIVE_LOWPWR,			{ 0x7, 0x0, 0x0 } },
-	{ S5P_CMU_SYSCLK_ISP_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ S5P_CMU_SYSCLK_GPS_LOWPWR,		{ 0x1, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
-	{ S5P_ARM_CORE2_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE2,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL2,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_ARM_CORE3_LOWPWR,			{ 0x0, 0x0, 0x2 } },
-	{ S5P_DIS_IRQ_CORE3,			{ 0x0, 0x0, 0x0 } },
-	{ S5P_DIS_IRQ_CENTRAL3,			{ 0x0, 0x0, 0x0 } },
-	{ PMU_TABLE_END,},
-};
-
-static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
-	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_FSYS_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG,	{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_COMMON_SYS_PWR_REG,		{ 0x0, 0x0, 0x2} },
-	{ EXYNOS5_ARM_L2_SYS_PWR_REG,			{ 0x3, 0x3, 0x3} },
-	{ EXYNOS5_ARM_L2_OPTION,			{ 0x10, 0x10, 0x0 } },
-	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_USBOTG_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_G2D_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_USBDRD_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_SDMMC_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_CSSYS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_SECSS_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_ROTATOR_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_INTRAM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_INTROM_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_JPEG_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_JPEG_MEM_OPTION,			{ 0x10, 0x10, 0x0} },
-	{ EXYNOS5_HSI_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_MCUIOP_MEM_SYS_PWR_REG,		{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_SATA_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,	{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_XXTI_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,		{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,	{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_GSCL_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_ISP_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_MFC_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_G3D_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_DISP1_SYS_PWR_REG,			{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_MAU_SYS_PWR_REG,			{ 0x7, 0x7, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ PMU_TABLE_END,},
-};
-
-static struct exynos_pmu_conf exynos5420_pmu_config[] = {
-	/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
-	{ EXYNOS5_ARM_CORE0_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_CORE1_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_ARM_CORE2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_ARM_CORE3_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE0_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE1_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_CORE3_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG,	{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ISP_ARM_SYS_PWR_REG,				{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_ARM_COMMON_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_COMMON_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_ARM_L2_SYS_PWR_REG,				{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_KFC_L2_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_APLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_TOP_BUS_SYS_PWR_REG,				{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYS_PWR_REG,			{ 0x1, 0x1, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYS_PWR_REG,				{ 0x3, 0x3, 0x0} },
-	{ EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x0} },
-	{ EXYNOS5_LOGIC_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYS_PWR_REG,			{ 0x1, 0x0, 0x1} },
-	{ EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_INTRAM_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5420_INTROM_MEM_SYS_PWR_REG,			{ 0x3, 0x0, 0x3} },
-	{ EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG,		{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG,	{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_XUSBXTI_SYS_PWR_REG,				{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_XXTI_SYS_PWR_REG,				{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_EXT_REGULATOR_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYS_PWR_REG,			{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG,			{ 0x1, 0x1, 0x0} },
-	{ EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG,		{ 0x1, 0x0, 0x0} },
-	{ EXYNOS5_GSCL_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_ISP_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_MFC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_G3D_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_DISP1_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_MAU_SYS_PWR_REG,				{ 0x7, 0x7, 0x0} },
-	{ EXYNOS5420_G2D_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_MSC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_FSYS_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_FSYS2_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_PSGEN_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_PERIC_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5420_WCORE_SYS_PWR_REG,				{ 0x7, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,			{ 0x0, 0x0, 0x0} },
-	{ EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,		{ 0x0, 0x0, 0x0} },
-	{ PMU_TABLE_END,},
-};
-
-static unsigned int const exynos3250_list_feed[] = {
-	EXYNOS3_ARM_CORE_OPTION(0),
-	EXYNOS3_ARM_CORE_OPTION(1),
-	EXYNOS3_ARM_CORE_OPTION(2),
-	EXYNOS3_ARM_CORE_OPTION(3),
-	EXYNOS3_ARM_COMMON_OPTION,
-	EXYNOS3_TOP_PWR_OPTION,
-	EXYNOS3_CORE_TOP_PWR_OPTION,
-	S5P_CAM_OPTION,
-	S5P_MFC_OPTION,
-	S5P_G3D_OPTION,
-	S5P_LCD0_OPTION,
-	S5P_ISP_OPTION,
-};
-
-static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
-{
-	unsigned int i;
-	unsigned int tmp;
-
-	/* Enable only SC_FEEDBACK */
-	for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
-		tmp = pmu_raw_readl(exynos3250_list_feed[i]);
-		tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
-		tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
-		pmu_raw_writel(tmp, exynos3250_list_feed[i]);
-	}
-
-	if (mode != SYS_SLEEP)
-		return;
-
-	pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
-	pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
-	pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
-	pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
-		       EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
-}
-
-static unsigned int const exynos5_list_both_cnt_feed[] = {
-	EXYNOS5_ARM_CORE0_OPTION,
-	EXYNOS5_ARM_CORE1_OPTION,
-	EXYNOS5_ARM_COMMON_OPTION,
-	EXYNOS5_GSCL_OPTION,
-	EXYNOS5_ISP_OPTION,
-	EXYNOS5_MFC_OPTION,
-	EXYNOS5_G3D_OPTION,
-	EXYNOS5_DISP1_OPTION,
-	EXYNOS5_MAU_OPTION,
-	EXYNOS5_TOP_PWR_OPTION,
-	EXYNOS5_TOP_PWR_SYSMEM_OPTION,
-};
-
-static unsigned int const exynos5_list_disable_wfi_wfe[] = {
-	EXYNOS5_ARM_CORE1_OPTION,
-	EXYNOS5_FSYS_ARM_OPTION,
-	EXYNOS5_ISP_ARM_OPTION,
-};
-
-static unsigned int const exynos5420_list_disable_pmu_reg[] = {
-	EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,
-	EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,
-	EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,
-	EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,
-	EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,
-	EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,
-	EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,
-	EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,
-	EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,
-	EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,
-	EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,
-	EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
-};
-
-static void exynos_power_off(void)
-{
-	unsigned int tmp;
-
-	pr_info("Power down.\n");
-	tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
-	tmp ^= (1 << 8);
-	pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
-
-	/* Wait a little so we don't give a false warning below */
-	mdelay(100);
-
-	pr_err("Power down failed, please power off system manually.\n");
-	while (1)
-		;
-}
-
-static void exynos5420_powerdown_conf(enum sys_powerdown mode)
-{
-	u32 this_cluster;
-
-	this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
-
-	/*
-	 * set the cluster id to IROM register to ensure that we wake
-	 * up with the current cluster.
-	 */
-	pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2);
-}
-
-
-static void exynos5_powerdown_conf(enum sys_powerdown mode)
-{
-	unsigned int i;
-	unsigned int tmp;
-
-	/*
-	 * Enable both SC_FEEDBACK and SC_COUNTER
-	 */
-	for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
-		tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
-		tmp |= (EXYNOS5_USE_SC_FEEDBACK |
-			EXYNOS5_USE_SC_COUNTER);
-		pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
-	}
-
-	/*
-	 * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
-	 */
-	tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
-	tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
-
-	/*
-	 * Disable WFI/WFE on XXX_OPTION
-	 */
-	for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) {
-		tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]);
-		tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
-			 EXYNOS5_OPTION_USE_STANDBYWFI);
-		pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]);
-	}
-}
-
-void exynos_sys_powerdown_conf(enum sys_powerdown mode)
-{
-	unsigned int i;
-
-	const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data;
-
-	if (pmu_data->powerdown_conf)
-		pmu_data->powerdown_conf(mode);
-
-	if (pmu_data->pmu_config) {
-		for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
-			pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
-					pmu_data->pmu_config[i].offset);
-	}
-
-	if (pmu_data->powerdown_conf_extra)
-		pmu_data->powerdown_conf_extra(mode);
-
-	if (pmu_data->pmu_config_extra) {
-		for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
-			pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
-					pmu_data->pmu_config_extra[i].offset);
-	}
-}
-
-static void exynos3250_pmu_init(void)
-{
-	unsigned int value;
-
-	/*
-	 * To prevent from issuing new bus request form L2 memory system
-	 * If core status is power down, should be set '1' to L2 power down
-	 */
-	value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
-	value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
-
-	/* Enable USE_STANDBY_WFI for all CORE */
-	pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
-
-	/*
-	 * Set PSHOLD port for output high
-	 */
-	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
-	value |= S5P_PS_HOLD_OUTPUT_HIGH;
-	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
-
-	/*
-	 * Enable signal for PSHOLD port
-	 */
-	value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
-	value |= S5P_PS_HOLD_EN;
-	pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
-}
-
-static void exynos5250_pmu_init(void)
-{
-	unsigned int value;
-	/*
-	 * When SYS_WDTRESET is set, watchdog timer reset request
-	 * is ignored by power management unit.
-	 */
-	value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
-	value &= ~EXYNOS5_SYS_WDTRESET;
-	pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
-
-	value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
-	value &= ~EXYNOS5_SYS_WDTRESET;
-	pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
-}
-
-static void exynos5420_pmu_init(void)
-{
-	unsigned int value;
-	int i;
-
-	/*
-	 * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
-	 * for local power blocks to Low initially as per Table 8-4:
-	 * "System-Level Power-Down Configuration Registers".
-	 */
-	for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
-		pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
-
-	/* Enable USE_STANDBY_WFI for all CORE */
-	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
-
-	value  = pmu_raw_readl(EXYNOS_L2_OPTION(0));
-	value &= ~EXYNOS5_USE_RETENTION;
-	pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
-
-	value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
-	value &= ~EXYNOS5_USE_RETENTION;
-	pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
-
-	/*
-	 * If L2_COMMON is turned off, clocks related to ATB async
-	 * bridge are gated. Thus, when ISP power is gated, LPI
-	 * may get stuck.
-	 */
-	value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
-	value |= EXYNOS5420_ATB_ISP_ARM;
-	pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
-
-	value  = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
-	value |= EXYNOS5420_ATB_KFC;
-	pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
-
-	/* Prevent issue of new bus request from L2 memory */
-	value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
-	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
-
-	value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
-	value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
-	pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
-
-	/* This setting is to reduce suspend/resume time */
-	pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
-
-	/* Serialized CPU wakeup of Eagle */
-	pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
-
-	pmu_raw_writel(SPREAD_USE_STANDWFI,
-			EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
-
-	pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
-	pr_info("EXYNOS5420 PMU initialized\n");
-}
-
-static int pmu_restart_notify(struct notifier_block *this,
-		unsigned long code, void *unused)
-{
-	pmu_raw_writel(0x1, EXYNOS_SWRESET);
-
-	return NOTIFY_DONE;
-}
-
-static const struct exynos_pmu_data exynos3250_pmu_data = {
-	.pmu_config	= exynos3250_pmu_config,
-	.pmu_init	= exynos3250_pmu_init,
-	.powerdown_conf_extra	= exynos3250_powerdown_conf_extra,
-};
-
-static const struct exynos_pmu_data exynos4210_pmu_data = {
-	.pmu_config	= exynos4210_pmu_config,
-};
-
-static const struct exynos_pmu_data exynos4212_pmu_data = {
-	.pmu_config	= exynos4x12_pmu_config,
-};
-
-static const struct exynos_pmu_data exynos4412_pmu_data = {
-	.pmu_config		= exynos4x12_pmu_config,
-	.pmu_config_extra	= exynos4412_pmu_config,
-};
-
-static const struct exynos_pmu_data exynos5250_pmu_data = {
-	.pmu_config	= exynos5250_pmu_config,
-	.pmu_init	= exynos5250_pmu_init,
-	.powerdown_conf	= exynos5_powerdown_conf,
-};
-
-static struct exynos_pmu_data exynos5420_pmu_data = {
-	.pmu_config	= exynos5420_pmu_config,
-	.pmu_init	= exynos5420_pmu_init,
-	.powerdown_conf	= exynos5420_powerdown_conf,
-};
-
-/*
- * PMU platform driver and devicetree bindings.
- */
-static const struct of_device_id exynos_pmu_of_device_ids[] = {
-	{
-		.compatible = "samsung,exynos3250-pmu",
-		.data = &exynos3250_pmu_data,
-	}, {
-		.compatible = "samsung,exynos4210-pmu",
-		.data = &exynos4210_pmu_data,
-	}, {
-		.compatible = "samsung,exynos4212-pmu",
-		.data = &exynos4212_pmu_data,
-	}, {
-		.compatible = "samsung,exynos4412-pmu",
-		.data = &exynos4412_pmu_data,
-	}, {
-		.compatible = "samsung,exynos5250-pmu",
-		.data = &exynos5250_pmu_data,
-	}, {
-		.compatible = "samsung,exynos5420-pmu",
-		.data = &exynos5420_pmu_data,
-	},
-	{ /*sentinel*/ },
-};
-
-/*
- * Exynos PMU restart notifier, handles restart functionality
- */
-static struct notifier_block pmu_restart_handler = {
-	.notifier_call = pmu_restart_notify,
-	.priority = 128,
-};
-
-static int exynos_pmu_probe(struct platform_device *pdev)
-{
-	const struct of_device_id *match;
-	struct device *dev = &pdev->dev;
-	struct resource *res;
-	int ret;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	pmu_base_addr = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pmu_base_addr))
-		return PTR_ERR(pmu_base_addr);
-
-	pmu_context = devm_kzalloc(&pdev->dev,
-			sizeof(struct exynos_pmu_context),
-			GFP_KERNEL);
-	if (!pmu_context) {
-		dev_err(dev, "Cannot allocate memory.\n");
-		return -ENOMEM;
-	}
-	pmu_context->dev = dev;
-
-	match = of_match_node(exynos_pmu_of_device_ids, dev->of_node);
-
-	pmu_context->pmu_data = match->data;
-
-	if (pmu_context->pmu_data->pmu_init)
-		pmu_context->pmu_data->pmu_init();
-
-	platform_set_drvdata(pdev, pmu_context);
-
-	ret = register_restart_handler(&pmu_restart_handler);
-	if (ret)
-		dev_warn(dev, "can't register restart handler err=%d\n", ret);
-
-	pm_power_off = exynos_power_off;
-
-	dev_dbg(dev, "Exynos PMU Driver probe done\n");
-	return 0;
-}
-
-static struct platform_driver exynos_pmu_driver = {
-	.driver  = {
-		.name   = "exynos-pmu",
-		.of_match_table = exynos_pmu_of_device_ids,
-	},
-	.probe = exynos_pmu_probe,
-};
-
-static int __init exynos_pmu_init(void)
-{
-	return platform_driver_register(&exynos_pmu_driver);
-
-}
-postcore_initcall(exynos_pmu_init);
diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
deleted file mode 100644
index fba9068ed260..000000000000
--- a/arch/arm/mach-exynos/regs-pmu.h
+++ /dev/null
@@ -1,702 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS - Power management unit definition
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_PMU_H
-#define __ASM_ARCH_REGS_PMU_H __FILE__
-
-#define S5P_CENTRAL_SEQ_CONFIGURATION		0x0200
-
-#define S5P_CENTRAL_LOWPWR_CFG			(1 << 16)
-
-#define S5P_CENTRAL_SEQ_OPTION			0x0208
-
-#define S5P_USE_STANDBY_WFI0			(1 << 16)
-#define S5P_USE_STANDBY_WFI1			(1 << 17)
-#define S5P_USE_STANDBY_WFI2			(1 << 19)
-#define S5P_USE_STANDBY_WFI3			(1 << 20)
-#define S5P_USE_STANDBY_WFE0			(1 << 24)
-#define S5P_USE_STANDBY_WFE1			(1 << 25)
-#define S5P_USE_STANDBY_WFE2			(1 << 27)
-#define S5P_USE_STANDBY_WFE3			(1 << 28)
-
-#define S5P_USE_STANDBY_WFI_ALL \
-	(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \
-	 S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \
-	 S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \
-	 S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3)
-
-#define S5P_USE_DELAYED_RESET_ASSERTION		BIT(12)
-
-#define EXYNOS_CORE_PO_RESET(n)			((1 << 4) << n)
-#define EXYNOS_WAKEUP_FROM_LOWPWR		(1 << 28)
-#define EXYNOS_SWRESET				0x0400
-#define EXYNOS5440_SWRESET			0x00C4
-
-#define S5P_WAKEUP_STAT				0x0600
-#define S5P_EINT_WAKEUP_MASK			0x0604
-#define S5P_WAKEUP_MASK				0x0608
-#define S5P_WAKEUP_MASK2				0x0614
-
-#define S5P_INFORM0				0x0800
-#define S5P_INFORM1				0x0804
-#define S5P_INFORM5				0x0814
-#define S5P_INFORM6				0x0818
-#define S5P_INFORM7				0x081C
-#define S5P_PMU_SPARE2				0x0908
-#define S5P_PMU_SPARE3				0x090C
-
-#define EXYNOS_IROM_DATA2			0x0988
-#define S5P_ARM_CORE0_LOWPWR			0x1000
-#define S5P_DIS_IRQ_CORE0			0x1004
-#define S5P_DIS_IRQ_CENTRAL0			0x1008
-#define S5P_ARM_CORE1_LOWPWR			0x1010
-#define S5P_DIS_IRQ_CORE1			0x1014
-#define S5P_DIS_IRQ_CENTRAL1			0x1018
-#define S5P_ARM_COMMON_LOWPWR			0x1080
-#define S5P_L2_0_LOWPWR				0x10C0
-#define S5P_L2_1_LOWPWR				0x10C4
-#define S5P_CMU_ACLKSTOP_LOWPWR			0x1100
-#define S5P_CMU_SCLKSTOP_LOWPWR			0x1104
-#define S5P_CMU_RESET_LOWPWR			0x110C
-#define S5P_APLL_SYSCLK_LOWPWR			0x1120
-#define S5P_MPLL_SYSCLK_LOWPWR			0x1124
-#define S5P_VPLL_SYSCLK_LOWPWR			0x1128
-#define S5P_EPLL_SYSCLK_LOWPWR			0x112C
-#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR	0x1138
-#define S5P_CMU_RESET_GPSALIVE_LOWPWR		0x113C
-#define S5P_CMU_CLKSTOP_CAM_LOWPWR		0x1140
-#define S5P_CMU_CLKSTOP_TV_LOWPWR		0x1144
-#define S5P_CMU_CLKSTOP_MFC_LOWPWR		0x1148
-#define S5P_CMU_CLKSTOP_G3D_LOWPWR		0x114C
-#define S5P_CMU_CLKSTOP_LCD0_LOWPWR		0x1150
-#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR		0x1158
-#define S5P_CMU_CLKSTOP_GPS_LOWPWR		0x115C
-#define S5P_CMU_RESET_CAM_LOWPWR		0x1160
-#define S5P_CMU_RESET_TV_LOWPWR			0x1164
-#define S5P_CMU_RESET_MFC_LOWPWR		0x1168
-#define S5P_CMU_RESET_G3D_LOWPWR		0x116C
-#define S5P_CMU_RESET_LCD0_LOWPWR		0x1170
-#define S5P_CMU_RESET_MAUDIO_LOWPWR		0x1178
-#define S5P_CMU_RESET_GPS_LOWPWR		0x117C
-#define S5P_TOP_BUS_LOWPWR			0x1180
-#define S5P_TOP_RETENTION_LOWPWR		0x1184
-#define S5P_TOP_PWR_LOWPWR			0x1188
-#define S5P_LOGIC_RESET_LOWPWR			0x11A0
-#define S5P_ONENAND_MEM_LOWPWR			0x11C0
-#define S5P_G2D_ACP_MEM_LOWPWR			0x11C8
-#define S5P_USBOTG_MEM_LOWPWR			0x11CC
-#define S5P_HSMMC_MEM_LOWPWR			0x11D0
-#define S5P_CSSYS_MEM_LOWPWR			0x11D4
-#define S5P_SECSS_MEM_LOWPWR			0x11D8
-#define S5P_PAD_RETENTION_DRAM_LOWPWR		0x1200
-#define S5P_PAD_RETENTION_MAUDIO_LOWPWR		0x1204
-#define S5P_PAD_RETENTION_GPIO_LOWPWR		0x1220
-#define S5P_PAD_RETENTION_UART_LOWPWR		0x1224
-#define S5P_PAD_RETENTION_MMCA_LOWPWR		0x1228
-#define S5P_PAD_RETENTION_MMCB_LOWPWR		0x122C
-#define S5P_PAD_RETENTION_EBIA_LOWPWR		0x1230
-#define S5P_PAD_RETENTION_EBIB_LOWPWR		0x1234
-#define S5P_PAD_RETENTION_ISOLATION_LOWPWR	0x1240
-#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR	0x1260
-#define S5P_XUSBXTI_LOWPWR			0x1280
-#define S5P_XXTI_LOWPWR				0x1284
-#define S5P_EXT_REGULATOR_LOWPWR		0x12C0
-#define S5P_GPIO_MODE_LOWPWR			0x1300
-#define S5P_GPIO_MODE_MAUDIO_LOWPWR		0x1340
-#define S5P_CAM_LOWPWR				0x1380
-#define S5P_TV_LOWPWR				0x1384
-#define S5P_MFC_LOWPWR				0x1388
-#define S5P_G3D_LOWPWR				0x138C
-#define S5P_LCD0_LOWPWR				0x1390
-#define S5P_MAUDIO_LOWPWR			0x1398
-#define S5P_GPS_LOWPWR				0x139C
-#define S5P_GPS_ALIVE_LOWPWR			0x13A0
-
-#define EXYNOS_ARM_CORE0_CONFIGURATION		0x2000
-#define EXYNOS_ARM_CORE_CONFIGURATION(_nr)	\
-			(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
-#define EXYNOS_ARM_CORE_STATUS(_nr)		\
-			(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_ARM_CORE_OPTION(_nr)		\
-			(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8)
-
-#define EXYNOS_ARM_COMMON_CONFIGURATION		0x2500
-#define EXYNOS_COMMON_CONFIGURATION(_nr)	\
-			(EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr)))
-#define EXYNOS_COMMON_STATUS(_nr)		\
-			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_COMMON_OPTION(_nr)		\
-			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-
-#define EXYNOS_CORE_LOCAL_PWR_EN		0x3
-
-#define EXYNOS_ARM_COMMON_STATUS		0x2504
-#define EXYNOS_COMMON_OPTION(_nr)		\
-			(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
-
-#define EXYNOS_ARM_L2_CONFIGURATION		0x2600
-#define EXYNOS_L2_CONFIGURATION(_nr)		\
-			(EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80))
-#define EXYNOS_L2_STATUS(_nr)			\
-			(EXYNOS_L2_CONFIGURATION(_nr) + 0x4)
-#define EXYNOS_L2_OPTION(_nr)			\
-			(EXYNOS_L2_CONFIGURATION(_nr) + 0x8)
-#define EXYNOS_L2_COMMON_PWR_EN			0x3
-
-#define EXYNOS_ARM_CORE_X_STATUS_OFFSET		0x4
-
-#define EXYNOS5_APLL_SYSCLK_CONFIGURATION	0x2A00
-#define EXYNOS5_APLL_SYSCLK_STATUS		0x2A04
-
-#define EXYNOS5_ARM_L2_OPTION			0x2608
-#define EXYNOS5_USE_RETENTION			BIT(4)
-
-#define EXYNOS5_L2RSTDISABLE_VALUE		BIT(3)
-
-#define S5P_PAD_RET_MAUDIO_OPTION		0x3028
-#define S5P_PAD_RET_MMC2_OPTION			0x30c8
-#define S5P_PAD_RET_GPIO_OPTION			0x3108
-#define S5P_PAD_RET_UART_OPTION			0x3128
-#define S5P_PAD_RET_MMCA_OPTION			0x3148
-#define S5P_PAD_RET_MMCB_OPTION			0x3168
-#define S5P_PAD_RET_EBIA_OPTION			0x3188
-#define S5P_PAD_RET_EBIB_OPTION			0x31A8
-#define S5P_PAD_RET_SPI_OPTION			0x31c8
-
-#define S5P_PS_HOLD_CONTROL			0x330C
-#define S5P_PS_HOLD_EN				(1 << 31)
-#define S5P_PS_HOLD_OUTPUT_HIGH			(3 << 8)
-
-#define S5P_CAM_OPTION				0x3C08
-#define S5P_MFC_OPTION				0x3C48
-#define S5P_G3D_OPTION				0x3C68
-#define S5P_LCD0_OPTION				0x3C88
-#define S5P_LCD1_OPTION				0x3CA8
-#define S5P_ISP_OPTION				S5P_LCD1_OPTION
-
-#define S5P_CORE_LOCAL_PWR_EN			0x3
-#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG		(0x3 << 8)
-#define S5P_CORE_AUTOWAKEUP_EN			(1 << 31)
-
-/* Only for EXYNOS4210 */
-#define S5P_CMU_CLKSTOP_LCD1_LOWPWR	0x1154
-#define S5P_CMU_RESET_LCD1_LOWPWR	0x1174
-#define S5P_MODIMIF_MEM_LOWPWR		0x11C4
-#define S5P_PCIE_MEM_LOWPWR		0x11E0
-#define S5P_SATA_MEM_LOWPWR		0x11E4
-#define S5P_LCD1_LOWPWR			0x1394
-
-/* Only for EXYNOS4x12 */
-#define S5P_ISP_ARM_LOWPWR			0x1050
-#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR	0x1054
-#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR	0x1058
-#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR		0x1110
-#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR		0x1114
-#define S5P_CMU_RESET_COREBLK_LOWPWR		0x111C
-#define S5P_MPLLUSER_SYSCLK_LOWPWR		0x1130
-#define S5P_CMU_CLKSTOP_ISP_LOWPWR		0x1154
-#define S5P_CMU_RESET_ISP_LOWPWR		0x1174
-#define S5P_TOP_BUS_COREBLK_LOWPWR		0x1190
-#define S5P_TOP_RETENTION_COREBLK_LOWPWR	0x1194
-#define S5P_TOP_PWR_COREBLK_LOWPWR		0x1198
-#define S5P_OSCCLK_GATE_LOWPWR			0x11A4
-#define S5P_LOGIC_RESET_COREBLK_LOWPWR		0x11B0
-#define S5P_OSCCLK_GATE_COREBLK_LOWPWR		0x11B4
-#define S5P_HSI_MEM_LOWPWR			0x11C4
-#define S5P_ROTATOR_MEM_LOWPWR			0x11DC
-#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR	0x123C
-#define S5P_PAD_ISOLATION_COREBLK_LOWPWR	0x1250
-#define S5P_GPIO_MODE_COREBLK_LOWPWR		0x1320
-#define S5P_TOP_ASB_RESET_LOWPWR		0x1344
-#define S5P_TOP_ASB_ISOLATION_LOWPWR		0x1348
-#define S5P_ISP_LOWPWR				0x1394
-#define S5P_DRAM_FREQ_DOWN_LOWPWR		0x13B0
-#define S5P_DDRPHY_DLLOFF_LOWPWR		0x13B4
-#define S5P_CMU_SYSCLK_ISP_LOWPWR		0x13B8
-#define S5P_CMU_SYSCLK_GPS_LOWPWR		0x13BC
-#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR		0x13C0
-
-#define S5P_ARM_L2_0_OPTION			0x2608
-#define S5P_ARM_L2_1_OPTION			0x2628
-#define S5P_ONENAND_MEM_OPTION			0x2E08
-#define S5P_HSI_MEM_OPTION			0x2E28
-#define S5P_G2D_ACP_MEM_OPTION			0x2E48
-#define S5P_USBOTG_MEM_OPTION			0x2E68
-#define S5P_HSMMC_MEM_OPTION			0x2E88
-#define S5P_CSSYS_MEM_OPTION			0x2EA8
-#define S5P_SECSS_MEM_OPTION			0x2EC8
-#define S5P_ROTATOR_MEM_OPTION			0x2F48
-
-/* Only for EXYNOS4412 */
-#define S5P_ARM_CORE2_LOWPWR			0x1020
-#define S5P_DIS_IRQ_CORE2			0x1024
-#define S5P_DIS_IRQ_CENTRAL2			0x1028
-#define S5P_ARM_CORE3_LOWPWR			0x1030
-#define S5P_DIS_IRQ_CORE3			0x1034
-#define S5P_DIS_IRQ_CENTRAL3			0x1038
-
-/* Only for EXYNOS3XXX */
-#define EXYNOS3_ARM_CORE0_SYS_PWR_REG			0x1000
-#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG	0x1004
-#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG	0x1008
-#define EXYNOS3_ARM_CORE1_SYS_PWR_REG			0x1010
-#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG	0x1014
-#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG	0x1018
-#define EXYNOS3_ISP_ARM_SYS_PWR_REG			0x1050
-#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG	0x1054
-#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG	0x1058
-#define EXYNOS3_ARM_COMMON_SYS_PWR_REG			0x1080
-#define EXYNOS3_ARM_L2_SYS_PWR_REG			0x10C0
-#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG		0x1100
-#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG		0x1104
-#define EXYNOS3_CMU_RESET_SYS_PWR_REG			0x110C
-#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG	0x1110
-#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG	0x1114
-#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG		0x111C
-#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG			0x1120
-#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG			0x1124
-#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG			0x1128
-#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG			0x112C
-#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG		0x1130
-#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG		0x1134
-#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG		0x1138
-#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG		0x1140
-#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG		0x1148
-#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG		0x114C
-#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG		0x1150
-#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG		0x1154
-#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG		0x1158
-#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG		0x1160
-#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG		0x1168
-#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG		0x116C
-#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG		0x1170
-#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG		0x1174
-#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG		0x1178
-#define EXYNOS3_TOP_BUS_SYS_PWR_REG			0x1180
-#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG		0x1184
-#define EXYNOS3_TOP_PWR_SYS_PWR_REG			0x1188
-#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG		0x1190
-#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG	0x1194
-#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG		0x1198
-#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG			0x11A0
-#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG			0x11A4
-#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG		0x11B0
-#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG		0x11B4
-#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG		0x1200
-#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG	0x1204
-#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG		0x1208
-#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG		0x1218
-#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG		0x1220
-#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG		0x1224
-#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG		0x1228
-#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG		0x122C
-#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG		0x1230
-#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG		0x1234
-#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG		0x1238
-#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG		0x1240
-#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG			0x1260
-#define EXYNOS3_XUSBXTI_SYS_PWR_REG			0x1280
-#define EXYNOS3_XXTI_SYS_PWR_REG			0x1284
-#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG		0x12C0
-#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG	0x12C4
-#define EXYNOS3_GPIO_MODE_SYS_PWR_REG			0x1300
-#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG		0x1340
-#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG		0x1344
-#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG		0x1348
-#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG	0x1350
-#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG	0x1354
-#define EXYNOS3_CAM_SYS_PWR_REG				0x1380
-#define EXYNOS3_MFC_SYS_PWR_REG				0x1388
-#define EXYNOS3_G3D_SYS_PWR_REG				0x138C
-#define EXYNOS3_LCD0_SYS_PWR_REG			0x1390
-#define EXYNOS3_ISP_SYS_PWR_REG				0x1394
-#define EXYNOS3_MAUDIO_SYS_PWR_REG			0x1398
-#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG		0x13B0
-#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG		0x13B4
-#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG		0x13B8
-#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG		0x13C0
-#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG			0x13C4
-#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG			0x13C8
-
-#define EXYNOS3_ARM_CORE0_OPTION			0x2008
-#define EXYNOS3_ARM_CORE_OPTION(_nr)	\
-			(EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80))
-
-#define EXYNOS3_ARM_COMMON_OPTION			0x2408
-#define EXYNOS3_ARM_L2_OPTION				0x2608
-#define EXYNOS3_TOP_PWR_OPTION				0x2C48
-#define EXYNOS3_CORE_TOP_PWR_OPTION			0x2CA8
-#define EXYNOS3_XUSBXTI_DURATION			0x341C
-#define EXYNOS3_XXTI_DURATION				0x343C
-#define EXYNOS3_EXT_REGULATOR_DURATION			0x361C
-#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION		0x363C
-#define XUSBXTI_DURATION				0x00000BB8
-#define XXTI_DURATION					XUSBXTI_DURATION
-#define EXT_REGULATOR_DURATION				0x00001D4C
-#define EXT_REGULATOR_COREBLK_DURATION			EXT_REGULATOR_DURATION
-
-/* for XXX_OPTION */
-#define EXYNOS3_OPTION_USE_SC_COUNTER			(1 << 0)
-#define EXYNOS3_OPTION_USE_SC_FEEDBACK			(1 << 1)
-#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN	(1 << 7)
-
-/* For EXYNOS5 */
-
-#define EXYNOS5_AUTO_WDTRESET_DISABLE				0x0408
-#define EXYNOS5_MASK_WDTRESET_REQUEST				0x040C
-
-#define EXYNOS5_USE_RETENTION			BIT(4)
-#define EXYNOS5_SYS_WDTRESET					(1 << 20)
-
-#define EXYNOS5_ARM_CORE0_SYS_PWR_REG				0x1000
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG		0x1004
-#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG		0x1008
-#define EXYNOS5_ARM_CORE1_SYS_PWR_REG				0x1010
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG		0x1014
-#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG		0x1018
-#define EXYNOS5_FSYS_ARM_SYS_PWR_REG				0x1040
-#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG		0x1048
-#define EXYNOS5_ISP_ARM_SYS_PWR_REG				0x1050
-#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		0x1054
-#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		0x1058
-#define EXYNOS5_ARM_COMMON_SYS_PWR_REG				0x1080
-#define EXYNOS5_ARM_L2_SYS_PWR_REG				0x10C0
-#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG			0x1100
-#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG			0x1104
-#define EXYNOS5_CMU_RESET_SYS_PWR_REG				0x110C
-#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG			0x1120
-#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG			0x1124
-#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG			0x112C
-#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG			0x1130
-#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG			0x1134
-#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG			0x1138
-#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG				0x1140
-#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG				0x1144
-#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG				0x1148
-#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG				0x114C
-#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG				0x1150
-#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG				0x1154
-#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG			0x1164
-#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG			0x1170
-#define EXYNOS5_TOP_BUS_SYS_PWR_REG				0x1180
-#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG			0x1184
-#define EXYNOS5_TOP_PWR_SYS_PWR_REG				0x1188
-#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG			0x1190
-#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG		0x1194
-#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG			0x1198
-#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG				0x11A0
-#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG				0x11A4
-#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG			0x11B0
-#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG			0x11B4
-#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG				0x11C0
-#define EXYNOS5_G2D_MEM_SYS_PWR_REG				0x11C8
-#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG				0x11CC
-#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG				0x11D0
-#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG				0x11D4
-#define EXYNOS5_SECSS_MEM_SYS_PWR_REG				0x11D8
-#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG				0x11DC
-#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG				0x11E0
-#define EXYNOS5_INTROM_MEM_SYS_PWR_REG				0x11E4
-#define EXYNOS5_JPEG_MEM_SYS_PWR_REG				0x11E8
-#define EXYNOS5_HSI_MEM_SYS_PWR_REG				0x11EC
-#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG				0x11F4
-#define EXYNOS5_SATA_MEM_SYS_PWR_REG				0x11FC
-#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG			0x1200
-#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG			0x1204
-#define EXYNOS5_PAD_RETENTION_EFNAND_SYS_PWR_REG		0x1208
-#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG			0x1220
-#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG			0x1224
-#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG			0x1228
-#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG			0x122C
-#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG			0x1230
-#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG			0x1234
-#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG			0x1238
-#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG		0x123C
-#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG			0x1240
-#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG		0x1250
-#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG				0x1260
-#define EXYNOS5_XUSBXTI_SYS_PWR_REG				0x1280
-#define EXYNOS5_XXTI_SYS_PWR_REG				0x1284
-#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG			0x12C0
-#define EXYNOS5_GPIO_MODE_SYS_PWR_REG				0x1300
-#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG			0x1320
-#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG			0x1340
-#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG			0x1344
-#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG			0x1348
-#define EXYNOS5_GSCL_SYS_PWR_REG				0x1400
-#define EXYNOS5_ISP_SYS_PWR_REG					0x1404
-#define EXYNOS5_MFC_SYS_PWR_REG					0x1408
-#define EXYNOS5_G3D_SYS_PWR_REG					0x140C
-#define EXYNOS5_DISP1_SYS_PWR_REG				0x1414
-#define EXYNOS5_MAU_SYS_PWR_REG					0x1418
-#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG			0x1480
-#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG			0x1484
-#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG			0x1488
-#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG			0x148C
-#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG			0x1494
-#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG			0x1498
-#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG			0x14C0
-#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG			0x14C4
-#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG			0x14C8
-#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG			0x14CC
-#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG			0x14D4
-#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG			0x14D8
-#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG			0x1580
-#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG			0x1584
-#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG			0x1588
-#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG			0x158C
-#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG			0x1594
-#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG			0x1598
-
-#define EXYNOS5_ARM_CORE0_OPTION				0x2008
-#define EXYNOS5_ARM_CORE1_OPTION				0x2088
-#define EXYNOS5_FSYS_ARM_OPTION					0x2208
-#define EXYNOS5_ISP_ARM_OPTION					0x2288
-#define EXYNOS5_ARM_COMMON_OPTION				0x2408
-#define EXYNOS5_ARM_L2_OPTION					0x2608
-#define EXYNOS5_TOP_PWR_OPTION					0x2C48
-#define EXYNOS5_TOP_PWR_SYSMEM_OPTION				0x2CC8
-#define EXYNOS5_JPEG_MEM_OPTION					0x2F48
-#define EXYNOS5_GSCL_OPTION					0x4008
-#define EXYNOS5_ISP_OPTION					0x4028
-#define EXYNOS5_MFC_OPTION					0x4048
-#define EXYNOS5_G3D_OPTION					0x4068
-#define EXYNOS5_DISP1_OPTION					0x40A8
-#define EXYNOS5_MAU_OPTION					0x40C8
-
-#define EXYNOS5_USE_SC_FEEDBACK					(1 << 1)
-#define EXYNOS5_USE_SC_COUNTER					(1 << 0)
-
-#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN			(1 << 7)
-
-#define EXYNOS5_OPTION_USE_STANDBYWFE				(1 << 24)
-#define EXYNOS5_OPTION_USE_STANDBYWFI				(1 << 16)
-
-#define EXYNOS5_OPTION_USE_RETENTION				(1 << 4)
-
-#define EXYNOS5420_SWRESET_KFC_SEL				0x3
-
-#include <asm/cputype.h>
-#define MAX_CPUS_IN_CLUSTER	4
-
-static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr)
-{
-	return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER)
-		 + MPIDR_AFFINITY_LEVEL(mpidr, 0));
-}
-
-/* Only for EXYNOS5420 */
-#define EXYNOS5420_ISP_ARM_OPTION				0x2488
-#define EXYNOS5420_L2RSTDISABLE_VALUE				BIT(3)
-
-#define EXYNOS5420_LPI_MASK					0x0004
-#define EXYNOS5420_LPI_MASK1					0x0008
-#define EXYNOS5420_UFS						BIT(8)
-#define EXYNOS5420_ATB_KFC					BIT(13)
-#define EXYNOS5420_ATB_ISP_ARM					BIT(19)
-#define EXYNOS5420_EMULATION					BIT(31)
-#define ATB_ISP_ARM						BIT(12)
-#define ATB_KFC							BIT(13)
-#define ATB_NOC							BIT(14)
-
-#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE			0x0100
-#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI		0x0104
-#define EXYNOS5420_UP_SCHEDULER					0x0120
-#define SPREAD_ENABLE						0xF
-#define SPREAD_USE_STANDWFI					0xF
-
-#define EXYNOS5420_KFC_CORE_RESET0				BIT(8)
-#define EXYNOS5420_KFC_ETM_RESET0				BIT(20)
-
-#define EXYNOS5420_KFC_CORE_RESET(_nr)				\
-	((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr))
-
-#define EXYNOS5420_BB_CON1					0x0784
-#define EXYNOS5420_BB_SEL_EN					BIT(31)
-#define EXYNOS5420_BB_PMOS_EN					BIT(7)
-#define EXYNOS5420_BB_1300X					0XF
-
-#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG			0x1020
-#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG		0x1024
-#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG	0x1028
-#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG			0x1030
-#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG		0x1034
-#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG	0x1038
-#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG			0x1040
-#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG		0x1044
-#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG	0x1048
-#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG			0x1050
-#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG		0x1054
-#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG	0x1058
-#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG			0x1060
-#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG		0x1064
-#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG	0x1068
-#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG			0x1070
-#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG		0x1074
-#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG	0x1078
-#define EXYNOS5420_ISP_ARM_SYS_PWR_REG				0x1090
-#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG		0x1094
-#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG		0x1098
-#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG			0x10A0
-#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG			0x10B0
-#define EXYNOS5420_KFC_L2_SYS_PWR_REG				0x10D0
-#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG			0x1158
-#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG			0x115C
-#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG			0x1160
-#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG                      0x1174
-#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG                      0x1178
-#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG                       0x11B8
-#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG                       0x11BC
-#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR			0x11C0
-#define EXYNOS5420_USBDEV_MEM_SYS_PWR				0x11CC
-#define EXYNOS5420_USBDEV1_MEM_SYS_PWR				0x11D0
-#define EXYNOS5420_SDMMC_MEM_SYS_PWR				0x11D4
-#define EXYNOS5420_CSSYS_MEM_SYS_PWR				0x11D8
-#define EXYNOS5420_SECSS_MEM_SYS_PWR				0x11DC
-#define EXYNOS5420_ROTATOR_MEM_SYS_PWR				0x11E0
-#define EXYNOS5420_INTRAM_MEM_SYS_PWR				0x11E4
-#define EXYNOS5420_INTROM_MEM_SYS_PWR				0x11E8
-#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG		0x1208
-#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG		0x1210
-#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG		0x1214
-#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG		0x1218
-#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG		0x121C
-#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG		0x1220
-#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG		0x1224
-#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG		0x1228
-#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG		0x122C
-#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG		0x1230
-#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG	0x1234
-#define EXYNOS5420_DISP1_SYS_PWR_REG				0x1410
-#define EXYNOS5420_MAU_SYS_PWR_REG				0x1414
-#define EXYNOS5420_G2D_SYS_PWR_REG				0x1418
-#define EXYNOS5420_MSC_SYS_PWR_REG				0x141C
-#define EXYNOS5420_FSYS_SYS_PWR_REG				0x1420
-#define EXYNOS5420_FSYS2_SYS_PWR_REG				0x1424
-#define EXYNOS5420_PSGEN_SYS_PWR_REG				0x1428
-#define EXYNOS5420_PERIC_SYS_PWR_REG				0x142C
-#define EXYNOS5420_WCORE_SYS_PWR_REG				0x1430
-#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG		0x1490
-#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG			0x1494
-#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG			0x1498
-#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG			0x149C
-#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG			0x14A0
-#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG		0x14A4
-#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG		0x14A8
-#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG		0x14AC
-#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG		0x14B0
-#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG		0x14BC
-#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG			0x14D0
-#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG			0x14D4
-#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG			0x14D8
-#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG			0x14DC
-#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG			0x14E0
-#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG			0x14E4
-#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG			0x14E8
-#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG			0x14EC
-#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG			0x14F0
-#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG		0x14F4
-#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG			0x1570
-#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG			0x1574
-#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG			0x1578
-#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG			0x157C
-#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG			0x1590
-#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG			0x1594
-#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG			0x1598
-#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG			0x159C
-#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG			0x15A0
-#define EXYNOS5420_SFR_AXI_CGDIS1				0x15E4
-#define EXYNOS_ARM_CORE2_CONFIGURATION				0x2100
-#define EXYNOS5420_ARM_CORE2_OPTION				0x2108
-#define EXYNOS_ARM_CORE3_CONFIGURATION				0x2180
-#define EXYNOS5420_ARM_CORE3_OPTION				0x2188
-#define EXYNOS5420_ARM_COMMON_STATUS				0x2504
-#define EXYNOS5420_ARM_COMMON_OPTION				0x2508
-#define EXYNOS5420_KFC_COMMON_STATUS				0x2584
-#define EXYNOS5420_KFC_COMMON_OPTION				0x2588
-#define EXYNOS5420_LOGIC_RESET_DURATION3			0x2D1C
-
-#define EXYNOS5420_PAD_RET_GPIO_OPTION				0x30C8
-#define EXYNOS5420_PAD_RET_UART_OPTION				0x30E8
-#define EXYNOS5420_PAD_RET_MMCA_OPTION				0x3108
-#define EXYNOS5420_PAD_RET_MMCB_OPTION				0x3128
-#define EXYNOS5420_PAD_RET_MMCC_OPTION				0x3148
-#define EXYNOS5420_PAD_RET_HSI_OPTION				0x3168
-#define EXYNOS5420_PAD_RET_SPI_OPTION				0x31C8
-#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION			0x31E8
-#define EXYNOS_PAD_RET_DRAM_OPTION				0x3008
-#define EXYNOS_PAD_RET_MAUDIO_OPTION				0x3028
-#define EXYNOS_PAD_RET_JTAG_OPTION				0x3048
-#define EXYNOS_PAD_RET_GPIO_OPTION				0x3108
-#define EXYNOS_PAD_RET_UART_OPTION				0x3128
-#define EXYNOS_PAD_RET_MMCA_OPTION				0x3148
-#define EXYNOS_PAD_RET_MMCB_OPTION				0x3168
-#define EXYNOS_PAD_RET_EBIA_OPTION				0x3188
-#define EXYNOS_PAD_RET_EBIB_OPTION				0x31A8
-
-#define EXYNOS_PS_HOLD_CONTROL					0x330C
-
-/* For SYS_PWR_REG */
-#define EXYNOS_SYS_PWR_CFG					BIT(0)
-
-#define EXYNOS5420_MFC_CONFIGURATION				0x4060
-#define EXYNOS5420_MFC_STATUS					0x4064
-#define EXYNOS5420_MFC_OPTION					0x4068
-#define EXYNOS5420_G3D_CONFIGURATION				0x4080
-#define EXYNOS5420_G3D_STATUS					0x4084
-#define EXYNOS5420_G3D_OPTION					0x4088
-#define EXYNOS5420_DISP0_CONFIGURATION				0x40A0
-#define EXYNOS5420_DISP0_STATUS					0x40A4
-#define EXYNOS5420_DISP0_OPTION					0x40A8
-#define EXYNOS5420_DISP1_CONFIGURATION				0x40C0
-#define EXYNOS5420_DISP1_STATUS					0x40C4
-#define EXYNOS5420_DISP1_OPTION					0x40C8
-#define EXYNOS5420_MAU_CONFIGURATION				0x40E0
-#define EXYNOS5420_MAU_STATUS					0x40E4
-#define EXYNOS5420_MAU_OPTION					0x40E8
-#define EXYNOS5420_FSYS2_OPTION					0x4168
-#define EXYNOS5420_PSGEN_OPTION					0x4188
-
-/* For EXYNOS_CENTRAL_SEQ_OPTION */
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0			BIT(16)
-#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1			BUT(17)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0			BIT(24)
-#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1			BIT(25)
-
-#define EXYNOS5420_ARM_USE_STANDBY_WFI0				BIT(4)
-#define EXYNOS5420_ARM_USE_STANDBY_WFI1				BIT(5)
-#define EXYNOS5420_ARM_USE_STANDBY_WFI2				BIT(6)
-#define EXYNOS5420_ARM_USE_STANDBY_WFI3				BIT(7)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI0				BIT(8)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI1				BIT(9)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI2				BIT(10)
-#define EXYNOS5420_KFC_USE_STANDBY_WFI3				BIT(11)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE0				BIT(16)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE1				BIT(17)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE2				BIT(18)
-#define EXYNOS5420_ARM_USE_STANDBY_WFE3				BIT(19)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE0				BIT(20)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE1				BIT(21)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE2				BIT(22)
-#define EXYNOS5420_KFC_USE_STANDBY_WFE3				BIT(23)
-
-#define DUR_WAIT_RESET				0xF
-
-#define EXYNOS5420_USE_STANDBY_WFI_ALL	(EXYNOS5420_ARM_USE_STANDBY_WFI0    \
-					 | EXYNOS5420_ARM_USE_STANDBY_WFI1  \
-					 | EXYNOS5420_ARM_USE_STANDBY_WFI2  \
-					 | EXYNOS5420_ARM_USE_STANDBY_WFI3  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI0  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI1  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI2  \
-					 | EXYNOS5420_KFC_USE_STANDBY_WFI3)
-
-#endif /* __ASM_ARCH_REGS_PMU_H */
diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c
index 0b04b6b0fa30..8ef1f3ee4e98 100644
--- a/arch/arm/mach-exynos/s5p-dev-mfc.c
+++ b/arch/arm/mach-exynos/s5p-dev-mfc.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/memblock.h>
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 5a7e47ceec91..fee2b003e662 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -19,10 +19,13 @@
 #include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
 #include <linux/err.h>
 #include <linux/regulator/machine.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -34,8 +37,6 @@
 #include <plat/pm-common.h>
 
 #include "common.h"
-#include "exynos-pmu.h"
-#include "regs-pmu.h"
 #include "regs-srom.h"
 
 #define REG_TABLE_END (-1U)
@@ -265,7 +266,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 	return 0;
 }
 
-#define EXYNOS_PMU_IRQ(symbol, name)	OF_DECLARE_2(irqchip, symbol, name, exynos_pmu_irq_init)
+#define EXYNOS_PMU_IRQ(symbol, name)	IRQCHIP_DECLARE(symbol, name, exynos_pmu_irq_init)
 
 EXYNOS_PMU_IRQ(exynos3250_pmu_irq, "samsung,exynos3250-pmu");
 EXYNOS_PMU_IRQ(exynos4210_pmu_irq, "samsung,exynos4210-pmu");
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index 07152d00fc50..cbbdd84cf49a 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -68,7 +68,6 @@ config ARCH_NETWINDER
 	select ISA
 	select ISA_DMA
 	select PCI
-	select VIRT_TO_BUS
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
 	  NetWinder.  Information about this machine can be found at:
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index 2478d9f4d92d..469a76ea0459 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
@@ -227,5 +227,5 @@ void __init gemini_gpio_init(void)
 						 (void *)i);
 	}
 
-	BUG_ON(gpiochip_add(&gemini_gpio_chip));
+	BUG_ON(gpiochip_add_data(&gemini_gpio_chip, NULL));
 }
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 31aa866c3317..81110ec34226 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_HIGHBANK
-	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
+	bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
+	depends on ARCH_MULTI_V7
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 83061ad0e282..a3b091a4d344 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -13,7 +13,8 @@ if ARCH_HISI
 menu "Hisilicon platform type"
 
 config ARCH_HI3xxx
-	bool "Hisilicon Hi36xx family" if ARCH_MULTI_V7
+	bool "Hisilicon Hi36xx family"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
@@ -23,7 +24,8 @@ config ARCH_HI3xxx
 	  Support for Hisilicon Hi36xx SoC family
 
 config ARCH_HIP01
-       bool "Hisilicon HIP01 family" if ARCH_MULTI_V7
+       bool "Hisilicon HIP01 family"
+       depends on ARCH_MULTI_V7
        select HAVE_ARM_SCU if SMP
        select HAVE_ARM_TWD if SMP
        select ARM_GLOBAL_TIMER
@@ -31,7 +33,8 @@ config ARCH_HIP01
          Support for Hisilicon HIP01 SoC family
 
 config ARCH_HIP04
-	bool "Hisilicon HiP04 Cortex A15 family" if ARCH_MULTI_V7
+	bool "Hisilicon HiP04 Cortex A15 family"
+	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select MCPM if SMP
@@ -40,7 +43,8 @@ config ARCH_HIP04
 	  Support for Hisilicon HiP04 SoC family
 
 config ARCH_HIX5HD2
-	bool "Hisilicon X5HD2 family" if ARCH_MULTI_V7
+	bool "Hisilicon X5HD2 family"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h
index c7648ef1825c..e883583a23f1 100644
--- a/arch/arm/mach-hisi/core.h
+++ b/arch/arm/mach-hisi/core.h
@@ -6,17 +6,14 @@
 extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr);
 extern int hi3xxx_get_cpu_jump(int cpu);
 extern void secondary_startup(void);
-extern struct smp_operations hi3xxx_smp_ops;
 
 extern void hi3xxx_cpu_die(unsigned int cpu);
 extern int hi3xxx_cpu_kill(unsigned int cpu);
 extern void hi3xxx_set_cpu(int cpu, bool enable);
 
-extern struct smp_operations hix5hd2_smp_ops;
 extern void hix5hd2_set_cpu(int cpu, bool enable);
 extern void hix5hd2_cpu_die(unsigned int cpu);
 
-extern struct smp_operations hip01_smp_ops;
 extern void hip01_set_cpu(int cpu, bool enable);
 extern void hip01_cpu_die(unsigned int cpu);
 #endif
diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c
index b5f8f5ffda79..4b653a8cb75c 100644
--- a/arch/arm/mach-hisi/platmcpm.c
+++ b/arch/arm/mach-hisi/platmcpm.c
@@ -239,7 +239,7 @@ err:
 }
 #endif
 
-static struct smp_operations __initdata hip04_smp_ops = {
+static const struct smp_operations hip04_smp_ops __initconst = {
 	.smp_boot_secondary	= hip04_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= hip04_cpu_die,
diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index 51744127db66..47ed32cf57cc 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -89,7 +89,7 @@ static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations hi3xxx_smp_ops __initdata = {
+static const struct smp_operations hi3xxx_smp_ops __initconst = {
 	.smp_prepare_cpus	= hi3xxx_smp_prepare_cpus,
 	.smp_boot_secondary	= hi3xxx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -126,7 +126,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle)
 }
 
 
-struct smp_operations hix5hd2_smp_ops __initdata = {
+static const struct smp_operations hix5hd2_smp_ops __initconst = {
 	.smp_prepare_cpus	= hisi_common_smp_prepare_cpus,
 	.smp_boot_secondary	= hix5hd2_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -176,7 +176,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations hip01_smp_ops __initdata = {
+static const struct smp_operations hip01_smp_ops __initconst = {
 	.smp_prepare_cpus       = hisi_common_smp_prepare_cpus,
 	.smp_boot_secondary     = hip01_boot_secondary,
 };
diff --git a/arch/arm/mach-imx/3ds_debugboard.c b/arch/arm/mach-imx/3ds_debugboard.c
index 16496a071ecb..cda330c93d61 100644
--- a/arch/arm/mach-imx/3ds_debugboard.c
+++ b/arch/arm/mach-imx/3ds_debugboard.c
@@ -94,8 +94,8 @@ static void mxc_expio_irq_handler(struct irq_desc *desc)
 	/* irq = gpio irq number */
 	desc->irq_data.chip->irq_mask(&desc->irq_data);
 
-	imr_val = __raw_readw(brd_io + INTR_MASK_REG);
-	int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
+	imr_val = imx_readw(brd_io + INTR_MASK_REG);
+	int_valid = imx_readw(brd_io + INTR_STATUS_REG) & ~imr_val;
 
 	expio_irq = 0;
 	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
@@ -117,17 +117,17 @@ static void expio_mask_irq(struct irq_data *d)
 	u16 reg;
 	u32 expio = d->hwirq;
 
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg = imx_readw(brd_io + INTR_MASK_REG);
 	reg |= (1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
+	imx_writew(reg, brd_io + INTR_MASK_REG);
 }
 
 static void expio_ack_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 
-	__raw_writew(1 << expio, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
+	imx_writew(1 << expio, brd_io + INTR_RESET_REG);
+	imx_writew(0, brd_io + INTR_RESET_REG);
 	expio_mask_irq(d);
 }
 
@@ -136,9 +136,9 @@ static void expio_unmask_irq(struct irq_data *d)
 	u16 reg;
 	u32 expio = d->hwirq;
 
-	reg = __raw_readw(brd_io + INTR_MASK_REG);
+	reg = imx_readw(brd_io + INTR_MASK_REG);
 	reg &= ~(1 << expio);
-	__raw_writew(reg, brd_io + INTR_MASK_REG);
+	imx_writew(reg, brd_io + INTR_MASK_REG);
 }
 
 static struct irq_chip expio_irq_chip = {
@@ -162,9 +162,9 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
 	if (brd_io == NULL)
 		return -ENOMEM;
 
-	if ((__raw_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
-	    (__raw_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
+	if ((imx_readw(brd_io + MAGIC_NUMBER1_REG) != 0xAAAA) ||
+	    (imx_readw(brd_io + MAGIC_NUMBER2_REG) != 0x5555) ||
+	    (imx_readw(brd_io + MAGIC_NUMBER3_REG) != 0xCAFE)) {
 		pr_info("3-Stack Debug board not detected\n");
 		iounmap(brd_io);
 		brd_io = NULL;
@@ -181,10 +181,10 @@ int __init mxc_expio_init(u32 base, u32 intr_gpio)
 	gpio_direction_input(intr_gpio);
 
 	/* disable the interrupt and clear the status */
-	__raw_writew(0, brd_io + INTR_MASK_REG);
-	__raw_writew(0xFFFF, brd_io + INTR_RESET_REG);
-	__raw_writew(0, brd_io + INTR_RESET_REG);
-	__raw_writew(0x1F, brd_io + INTR_MASK_REG);
+	imx_writew(0, brd_io + INTR_MASK_REG);
+	imx_writew(0xFFFF, brd_io + INTR_RESET_REG);
+	imx_writew(0, brd_io + INTR_RESET_REG);
+	imx_writew(0x1F, brd_io + INTR_MASK_REG);
 
 	irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
 	WARN_ON(irq_base < 0);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8ceda2844c4f..8973fae25436 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,7 +1,8 @@
 menuconfig ARCH_MXC
-	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
+	bool "Freescale i.MX family"
+	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
 	select ARCH_REQUIRE_GPIOLIB
-	select ARM_CPU_SUSPEND if PM
+	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
 	select PINCTRL
@@ -510,6 +511,7 @@ config	SOC_IMX53
 
 config SOC_IMX6
 	bool
+	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
@@ -560,8 +562,10 @@ config SOC_IMX7D
 	bool "i.MX7 Dual support"
 	select PINCTRL_IMX7D
 	select ARM_GIC
+	select HAVE_ARM_ARCH_TIMER
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
 	help
 		This enables support for Freescale i.MX7 Dual processor.
 
@@ -596,7 +600,8 @@ choice
 	default VF_USE_ARM_GLOBAL_TIMER
 
 	config VF_USE_ARM_GLOBAL_TIMER
-		bool "Use ARM Global Timer" if ARCH_MULTI_V7
+		bool "Use ARM Global Timer"
+		depends on ARCH_MULTI_V7
 		select ARM_GLOBAL_TIMER
 		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 		help
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index fb689d813b09..9fbe624a5ef9 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -3,7 +3,7 @@ obj-y := cpu.o system.o irq-common.o
 obj-$(CONFIG_SOC_IMX1) += mm-imx1.o
 obj-$(CONFIG_SOC_IMX21) += mm-imx21.o
 
-obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o
+obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o
 
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 231bb250c571..649a84c251ad 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -129,7 +129,14 @@ void __init imx_init_revision_from_anatop(void)
 
 	switch (digprog & 0xff) {
 	case 0:
-		revision = IMX_CHIP_REVISION_1_0;
+		/*
+		 * For i.MX6QP, most of the code for i.MX6Q can be resued,
+		 * so internally, we identify it as i.MX6Q Rev 2.0
+		 */
+		if (digprog >> 8 & 0x01)
+			revision = IMX_CHIP_REVISION_2_0;
+		else
+			revision = IMX_CHIP_REVISION_1_0;
 		break;
 	case 1:
 		revision = IMX_CHIP_REVISION_1_1;
@@ -151,7 +158,14 @@ void __init imx_init_revision_from_anatop(void)
 		revision = IMX_CHIP_REVISION_1_5;
 		break;
 	default:
-		revision = IMX_CHIP_REVISION_UNKNOWN;
+		/*
+		 * Fail back to return raw register value instead of 0xff.
+		 * It will be easy to know version information in SOC if it
+		 * can't be recognized by known version. And some chip's (i.MX7D)
+		 * digprog value match linux version format, so it needn't map
+		 * again and we can use register value directly.
+		 */
+		revision = digprog & 0xff;
 	}
 
 	mxc_set_cpu_type(digprog >> 16 & 0xff);
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 1a8932335b21..7fa176e792bd 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -66,12 +66,12 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	if (irq < AVIC_NUM_IRQS / 2) {
-		irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
+		irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+		imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
 	} else {
 		irq -= AVIC_NUM_IRQS / 2;
-		irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
+		irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+		imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
 	}
 
 	return 0;
@@ -94,8 +94,8 @@ static void avic_irq_suspend(struct irq_data *d)
 	struct irq_chip_type *ct = gc->chip_types;
 	int idx = d->hwirq >> 5;
 
-	avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask);
-	__raw_writel(gc->wake_active, avic_base + ct->regs.mask);
+	avic_saved_mask_reg[idx] = imx_readl(avic_base + ct->regs.mask);
+	imx_writel(gc->wake_active, avic_base + ct->regs.mask);
 }
 
 static void avic_irq_resume(struct irq_data *d)
@@ -104,7 +104,7 @@ static void avic_irq_resume(struct irq_data *d)
 	struct irq_chip_type *ct = gc->chip_types;
 	int idx = d->hwirq >> 5;
 
-	__raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
+	imx_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask);
 }
 
 #else
@@ -140,7 +140,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
 	u32 nivector;
 
 	do {
-		nivector = __raw_readl(avic_base + AVIC_NIVECSR) >> 16;
+		nivector = imx_readl(avic_base + AVIC_NIVECSR) >> 16;
 		if (nivector == 0xffff)
 			break;
 
@@ -164,16 +164,16 @@ void __init mxc_init_irq(void __iomem *irqbase)
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
 	 */
-	__raw_writel(0, avic_base + AVIC_INTCNTL);
-	__raw_writel(0x1f, avic_base + AVIC_NIMASK);
+	imx_writel(0, avic_base + AVIC_INTCNTL);
+	imx_writel(0x1f, avic_base + AVIC_NIMASK);
 
 	/* disable all interrupts */
-	__raw_writel(0, avic_base + AVIC_INTENABLEH);
-	__raw_writel(0, avic_base + AVIC_INTENABLEL);
+	imx_writel(0, avic_base + AVIC_INTENABLEH);
+	imx_writel(0, avic_base + AVIC_INTENABLEL);
 
 	/* all IRQ no FIQ */
-	__raw_writel(0, avic_base + AVIC_INTTYPEH);
-	__raw_writel(0, avic_base + AVIC_INTTYPEL);
+	imx_writel(0, avic_base + AVIC_INTTYPEH);
+	imx_writel(0, avic_base + AVIC_INTTYPEL);
 
 	irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id());
 	WARN_ON(irq_base < 0);
@@ -188,7 +188,7 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 	/* Set default priority value (0) for all IRQ's */
 	for (i = 0; i < 8; i++)
-		__raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
+		imx_writel(0, avic_base + AVIC_NIPRIORITY(i));
 
 	set_handle_irq(avic_handle_irq);
 
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 21e4e8697a58..58a38464480d 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -66,6 +66,7 @@ void imx_gpc_check_dt(void);
 void imx_gpc_set_arm_power_in_lpm(bool power_off);
 void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
 void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
+void imx25_pm_init(void);
 
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
@@ -131,6 +132,7 @@ void imx6q_pm_init(void);
 void imx6dl_pm_init(void);
 void imx6sl_pm_init(void);
 void imx6sx_pm_init(void);
+void imx6ul_pm_init(void);
 
 #ifdef CONFIG_PM
 void imx51_pm_init(void);
@@ -152,7 +154,7 @@ void imx_init_l2cache(void);
 static inline void imx_init_l2cache(void) {}
 #endif
 
-extern struct smp_operations imx_smp_ops;
-extern struct smp_operations ls1021a_smp_ops;
+extern const struct smp_operations imx_smp_ops;
+extern const struct smp_operations ls1021a_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index fe8d36f7e30e..8d2ae4091465 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -39,8 +39,7 @@ static int mx27_read_cpu_rev(void)
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
-				+ SYS_CHIP_ID));
+	val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
 
 	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
 
diff --git a/arch/arm/mach-imx/cpu-imx31.c b/arch/arm/mach-imx/cpu-imx31.c
index fde1860a2521..3daf1959a2f0 100644
--- a/arch/arm/mach-imx/cpu-imx31.c
+++ b/arch/arm/mach-imx/cpu-imx31.c
@@ -39,7 +39,7 @@ static int mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+	srev = imx_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
 	srev &= 0xff;
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
diff --git a/arch/arm/mach-imx/cpu-imx35.c b/arch/arm/mach-imx/cpu-imx35.c
index ec3aaa098c17..8a54234df23b 100644
--- a/arch/arm/mach-imx/cpu-imx35.c
+++ b/arch/arm/mach-imx/cpu-imx35.c
@@ -20,7 +20,7 @@ static int mx35_read_cpu_rev(void)
 {
 	u32 rev;
 
-	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
+	rev = imx_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
 	switch (rev) {
 	case 0x00:
 		return IMX_CHIP_REVISION_1_0;
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index 5b0f752d5507..6a96b7cf468f 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -45,20 +45,20 @@ void __init imx_set_aips(void __iomem *base)
  * Set all MPROTx to be non-bufferable, trusted for R/W,
  * not forced to user-mode.
  */
-	__raw_writel(0x77777777, base + 0x0);
-	__raw_writel(0x77777777, base + 0x4);
+	imx_writel(0x77777777, base + 0x0);
+	imx_writel(0x77777777, base + 0x4);
 
 /*
  * Set all OPACRx to be non-bufferable, to not require
  * supervisor privilege level for access, allow for
  * write access and untrusted master access.
  */
-	__raw_writel(0x0, base + 0x40);
-	__raw_writel(0x0, base + 0x44);
-	__raw_writel(0x0, base + 0x48);
-	__raw_writel(0x0, base + 0x4C);
-	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-	__raw_writel(reg, base + 0x50);
+	imx_writel(0x0, base + 0x40);
+	imx_writel(0x0, base + 0x44);
+	imx_writel(0x0, base + 0x48);
+	imx_writel(0x0, base + 0x4C);
+	reg = imx_readl(base + 0x50) & 0x00FFFFFF;
+	imx_writel(reg, base + 0x50);
 }
 
 void __init imx_aips_allow_unprivileged_access(
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 67f7fb13050d..09cebd8cef2b 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -177,7 +177,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imxuart_platform_data *pdata);
 
 #include <linux/platform_data/video-mx3fb.h>
-#include <linux/platform_data/camera-mx3.h>
+#include <linux/platform_data/media/camera-mx3.h>
 struct imx_ipu_core_data {
 	resource_size_t iobase;
 	resource_size_t synirq;
@@ -192,7 +192,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
 		const struct imx_ipu_core_data *data,
 		struct mx3fb_platform_data *pdata);
 
-#include <linux/platform_data/camera-mx2.h>
+#include <linux/platform_data/media/camera-mx2.h>
 struct imx_mx2_camera_data {
 	const char *devid;
 	resource_size_t iobasecsi;
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index 08ce20771bb3..fb9a73a57d00 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -64,23 +64,23 @@ static inline void epit_irq_disable(void)
 {
 	u32 val;
 
-	val = __raw_readl(timer_base + EPITCR);
+	val = imx_readl(timer_base + EPITCR);
 	val &= ~EPITCR_OCIEN;
-	__raw_writel(val, timer_base + EPITCR);
+	imx_writel(val, timer_base + EPITCR);
 }
 
 static inline void epit_irq_enable(void)
 {
 	u32 val;
 
-	val = __raw_readl(timer_base + EPITCR);
+	val = imx_readl(timer_base + EPITCR);
 	val |= EPITCR_OCIEN;
-	__raw_writel(val, timer_base + EPITCR);
+	imx_writel(val, timer_base + EPITCR);
 }
 
 static void epit_irq_acknowledge(void)
 {
-	__raw_writel(EPITSR_OCIF, timer_base + EPITSR);
+	imx_writel(EPITSR_OCIF, timer_base + EPITSR);
 }
 
 static int __init epit_clocksource_init(struct clk *timer_clk)
@@ -98,9 +98,9 @@ static int epit_set_next_event(unsigned long evt,
 {
 	unsigned long tcmp;
 
-	tcmp = __raw_readl(timer_base + EPITCNR);
+	tcmp = imx_readl(timer_base + EPITCNR);
 
-	__raw_writel(tcmp - evt, timer_base + EPITCMPR);
+	imx_writel(tcmp - evt, timer_base + EPITCMPR);
 
 	return 0;
 }
@@ -213,11 +213,11 @@ void __init epit_timer_init(void __iomem *base, int irq)
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
 	 */
-	__raw_writel(0x0, timer_base + EPITCR);
+	imx_writel(0x0, timer_base + EPITCR);
 
-	__raw_writel(0xffffffff, timer_base + EPITLR);
-	__raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
-			timer_base + EPITCR);
+	imx_writel(0xffffffff, timer_base + EPITLR);
+	imx_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN,
+		   timer_base + EPITCR);
 
 	/* init and register the timer to the framework */
 	epit_clocksource_init(timer_clk);
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 10bf7159b27d..fd8720532471 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -176,6 +177,7 @@ static struct irq_chip imx_gpc_chip = {
 	.irq_unmask		= imx_gpc_irq_unmask,
 	.irq_retrigger		= irq_chip_retrigger_hierarchy,
 	.irq_set_wake		= imx_gpc_irq_set_wake,
+	.irq_set_type           = irq_chip_set_type_parent,
 #ifdef CONFIG_SMP
 	.irq_set_affinity	= irq_chip_set_affinity_parent,
 #endif
@@ -271,12 +273,7 @@ static int __init imx_gpc_init(struct device_node *node,
 
 	return 0;
 }
-
-/*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
-OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
+IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
 
 void __init imx_gpc_check_dt(void)
 {
@@ -377,8 +374,13 @@ static struct pu_domain imx6q_pu_domain = {
 		.name = "PU",
 		.power_off = imx6q_pm_pu_power_off,
 		.power_on = imx6q_pm_pu_power_on,
-		.power_off_latency_ns = 25000,
-		.power_on_latency_ns = 2000000,
+		.states = {
+			[0] = {
+				.power_off_latency_ns = 25000,
+				.power_on_latency_ns = 2000000,
+			},
+		},
+		.state_count = 1,
 	},
 };
 
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index b5e976816b63..6c28d28b3c64 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -12,6 +12,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 diag_reg_offset:
 	.word	g_diag_reg - .
@@ -25,6 +26,7 @@ diag_reg_offset:
 	.endm
 
 ENTRY(v7_secondary_startup)
+ARM_BE8(setend be)			@ go BE8 if entered LE
 	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index 6dd22cabf4d3..3982e91b2f3e 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -57,10 +57,10 @@ void mxc_iomux_mode(unsigned int pin_mode)
 
 	spin_lock(&gpio_mux_lock);
 
-	l = __raw_readl(reg);
+	l = imx_readl(reg);
 	l &= ~(0xff << (field * 8));
 	l |= mode << (field * 8);
-	__raw_writel(l, reg);
+	imx_writel(l, reg);
 
 	spin_unlock(&gpio_mux_lock);
 }
@@ -82,10 +82,10 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 
 	spin_lock(&gpio_mux_lock);
 
-	l = __raw_readl(reg);
+	l = imx_readl(reg);
 	l &= ~(0x1ff << (field * 10));
 	l |= config << (field * 10);
-	__raw_writel(l, reg);
+	imx_writel(l, reg);
 
 	spin_unlock(&gpio_mux_lock);
 }
@@ -100,7 +100,7 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
 	unsigned pad = pin & IOMUX_PADNUM_MASK;
 
 	if (pad >= (PIN_MAX + 1)) {
-		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n",
 			pad, label ? label : "?");
 		return -EINVAL;
 	}
@@ -163,12 +163,12 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
 	u32 l;
 
 	spin_lock(&gpio_mux_lock);
-	l = __raw_readl(IOMUXGPR);
+	l = imx_readl(IOMUXGPR);
 	if (en)
 		l |= gp;
 	else
 		l &= ~gp;
 
-	__raw_writel(l, IOMUXGPR);
+	imx_writel(l, IOMUXGPR);
 	spin_unlock(&gpio_mux_lock);
 }
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
index ecd543664644..7aa90c863ad9 100644
--- a/arch/arm/mach-imx/iomux-v1.c
+++ b/arch/arm/mach-imx/iomux-v1.c
@@ -38,12 +38,12 @@ static unsigned imx_iomuxv1_numports;
 
 static inline unsigned long imx_iomuxv1_readl(unsigned offset)
 {
-	return __raw_readl(imx_iomuxv1_baseaddr + offset);
+	return imx_readl(imx_iomuxv1_baseaddr + offset);
 }
 
 static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
 {
-	__raw_writel(val, imx_iomuxv1_baseaddr + offset);
+	imx_writel(val, imx_iomuxv1_baseaddr + offset);
 }
 
 static inline void imx_iomuxv1_rmwl(unsigned offset,
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
index a53b2e64f98d..ca59d5f2ec92 100644
--- a/arch/arm/mach-imx/iomux-v3.c
+++ b/arch/arm/mach-imx/iomux-v3.c
@@ -45,13 +45,13 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
 
 	if (mux_ctrl_ofs)
-		__raw_writel(mux_mode, base + mux_ctrl_ofs);
+		imx_writel(mux_mode, base + mux_ctrl_ofs);
 
 	if (sel_input_ofs)
-		__raw_writel(sel_input, base + sel_input_ofs);
+		imx_writel(sel_input, base + sel_input_ofs);
 
 	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
-		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
+		imx_writel(pad_ctrl, base + pad_ctrl_ofs);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index f2060523ba48..eaee47a2fcc0 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -525,8 +525,8 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
-	__raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) |
-					(1 << 30), mx3_ccm_base + MXC_CCM_RCSR);
+	imx_writel(imx_readl(mx3_ccm_base + MXC_CCM_RCSR) | (1 << 30),
+		   mx3_ccm_base + MXC_CCM_RCSR);
 
 	/* RTC */
 	/* Get RTC IRQ and register the chip */
diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
index 9379fd0a7b4d..32dcb5e99e23 100644
--- a/arch/arm/mach-imx/mach-imx25.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -41,6 +41,7 @@ static const char * const imx25_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.init_early	= imx25_init_early,
+	.init_late      = imx25_pm_init,
 	.init_irq	= mx25_init_irq,
 	.dt_compat	= imx25_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index b015129e4045..6883fbaf9484 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -40,11 +40,10 @@ static void __init imx51_ipu_mipi_setup(void)
 	WARN_ON(!hsc_addr);
 
 	/* setup MIPI module to legacy mode */
-	__raw_writel(0xf00, hsc_addr);
+	imx_writel(0xf00, hsc_addr);
 
 	/* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */
-	__raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff,
-		hsc_addr + 0x800);
+	imx_writel(imx_readl(hsc_addr + 0x800) | 0x30ff, hsc_addr + 0x800);
 
 	iounmap(hsc_addr);
 }
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 3878494bd118..cb27d566d5ab 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -266,8 +266,11 @@ static void __init imx6q_init_machine(void)
 {
 	struct device *parent;
 
-	imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
-			      imx_get_soc_revision());
+	if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_2_0)
+		imx_print_silicon_rev("i.MX6QP", IMX_CHIP_REVISION_1_0);
+	else
+		imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
+				imx_get_soc_revision());
 
 	parent = imx_soc_device_init();
 	if (parent == NULL)
@@ -399,6 +402,7 @@ static void __init imx6q_init_irq(void)
 static const char * const imx6q_dt_compat[] __initconst = {
 	"fsl,imx6dl",
 	"fsl,imx6q",
+	"fsl,imx6qp",
 	NULL,
 };
 
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 1b97fe133cef..a38b16b69923 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -67,6 +67,7 @@ static void __init imx6ul_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	imx6ul_enet_init();
 	imx_anatop_init();
+	imx6ul_pm_init();
 }
 
 static void __init imx6ul_init_irq(void)
@@ -74,9 +75,16 @@ static void __init imx6ul_init_irq(void)
 	imx_init_revision_from_anatop();
 	imx_src_init();
 	irqchip_init();
+	imx6_pm_ccm_init("fsl,imx6ul-ccm");
 }
 
-static const char *imx6ul_dt_compat[] __initconst = {
+static void __init imx6ul_init_late(void)
+{
+	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
+		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
+}
+
+static const char * const imx6ul_dt_compat[] __initconst = {
 	"fsl,imx6ul",
 	NULL,
 };
@@ -84,5 +92,6 @@ static const char *imx6ul_dt_compat[] __initconst = {
 DT_MACHINE_START(IMX6UL, "Freescale i.MX6 Ultralite (Device Tree)")
 	.init_irq	= imx6ul_init_irq,
 	.init_machine	= imx6ul_init_machine,
+	.init_late	= imx6ul_init_late,
 	.dt_compat	= imx6ul_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 62f3437257f1..5a27f20c9a82 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -6,12 +6,85 @@
  * published by the Free Software Foundation.
  */
 #include <linux/irqchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
 
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+	u16 val;
+
+	/* Set RGMII IO voltage to 1.8V */
+	phy_write(dev, 0x1d, 0x1f);
+	phy_write(dev, 0x1e, 0x8);
+
+	/* disable phy AR8031 SmartEEE function. */
+	phy_write(dev, 0xd, 0x3);
+	phy_write(dev, 0xe, 0x805d);
+	phy_write(dev, 0xd, 0x4003);
+	val = phy_read(dev, 0xe);
+	val &= ~(0x1 << 8);
+	phy_write(dev, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
+}
+
+static int bcm54220_phy_fixup(struct phy_device *dev)
+{
+	/* enable RXC skew select RGMII copper mode */
+	phy_write(dev, 0x1e, 0x21);
+	phy_write(dev, 0x1f, 0x7ea8);
+	phy_write(dev, 0x1e, 0x2f);
+	phy_write(dev, 0x1f, 0x71b7);
+
+	return 0;
+}
+
+#define PHY_ID_AR8031	0x004dd074
+#define PHY_ID_BCM54220	0x600d8589
+
+static void __init imx7d_enet_phy_init(void)
+{
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+					   ar8031_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_BCM54220, 0xffffffff,
+					   bcm54220_phy_fixup);
+	}
+}
+
+static void __init imx7d_enet_clk_sel(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx7d-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_TX_CLK_SEL_MASK, 0);
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX7D_GPR1_ENET_CLK_DIR_MASK, 0);
+	} else {
+		pr_err("failed to find fsl,imx7d-iomux-gpr regmap\n");
+	}
+}
+
+static inline void imx7d_enet_init(void)
+{
+	imx7d_enet_phy_init();
+	imx7d_enet_clk_sel();
+}
+
 static void __init imx7d_init_machine(void)
 {
 	struct device *parent;
@@ -22,6 +95,7 @@ static void __init imx7d_init_machine(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	imx_anatop_init();
+	imx7d_enet_init();
 }
 
 static void __init imx7d_init_irq(void)
@@ -31,6 +105,11 @@ static void __init imx7d_init_irq(void)
 	irqchip_init();
 }
 
+static void __init imx7d_init_late(void)
+{
+	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+}
+
 static const char *const imx7d_dt_compat[] __initconst = {
 	"fsl,imx7d",
 	NULL,
@@ -38,6 +117,7 @@ static const char *const imx7d_dt_compat[] __initconst = {
 
 DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
 	.init_irq	= imx7d_init_irq,
+	.init_late	= imx7d_init_late,
 	.init_machine	= imx7d_init_machine,
 	.dt_compat	= imx7d_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 703ce31d7379..9986f9a697c8 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/physmap.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index eb1c3477c48a..a4c389eae31a 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -13,6 +13,8 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+#include <linux/gpio/driver.h>
+/* Needed for gpio_to_irq() */
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -202,9 +204,9 @@ static struct i2c_board_info mx27ads_i2c_devices[] = {
 static void vgpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	if (value)
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+		imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
 	else
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
+		imx_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
 static int vgpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
@@ -243,7 +245,7 @@ static void __init mx27ads_regulator_init(void)
 	vchip->ngpio		= 1;
 	vchip->direction_output	= vgpio_dir_out;
 	vchip->set		= vgpio_set;
-	gpiochip_add(vchip);
+	gpiochip_add_data(vchip, NULL);
 
 	platform_device_register_data(NULL, "reg-fixed-voltage",
 				      PLATFORM_DEVID_AUTO,
@@ -364,7 +366,7 @@ static void __init mx27ads_timer_init(void)
 {
 	unsigned long fref = 26000000;
 
-	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
+	if ((imx_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
 		fref = 27000000;
 
 	mx27_clocks_init(fref);
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 2b147e4bf9c9..4f2c56d44ba1 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -160,8 +160,8 @@ static void mx31ads_expio_irq_handler(struct irq_desc *desc)
 	u32 int_valid;
 	u32 expio_irq;
 
-	imr_val = __raw_readw(PBC_INTMASK_SET_REG);
-	int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val;
+	imr_val = imx_readw(PBC_INTMASK_SET_REG);
+	int_valid = imx_readw(PBC_INTSTATUS_REG) & imr_val;
 
 	expio_irq = 0;
 	for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
@@ -180,8 +180,8 @@ static void expio_mask_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 	/* mask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
-	__raw_readw(PBC_INTMASK_CLEAR_REG);
+	imx_writew(1 << expio, PBC_INTMASK_CLEAR_REG);
+	imx_readw(PBC_INTMASK_CLEAR_REG);
 }
 
 /*
@@ -192,7 +192,7 @@ static void expio_ack_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 	/* clear the interrupt status */
-	__raw_writew(1 << expio, PBC_INTSTATUS_REG);
+	imx_writew(1 << expio, PBC_INTSTATUS_REG);
 }
 
 /*
@@ -203,7 +203,7 @@ static void expio_unmask_irq(struct irq_data *d)
 {
 	u32 expio = d->hwirq;
 	/* unmask the interrupt */
-	__raw_writew(1 << expio, PBC_INTMASK_SET_REG);
+	imx_writew(1 << expio, PBC_INTMASK_SET_REG);
 }
 
 static struct irq_chip expio_irq_chip = {
@@ -226,8 +226,8 @@ static void __init mx31ads_init_expio(void)
 	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
 
 	/* disable the interrupt and clear the status */
-	__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
-	__raw_writew(0xFFFF, PBC_INTSTATUS_REG);
+	imx_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
+	imx_writew(0xFFFF, PBC_INTSTATUS_REG);
 
 	irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id());
 	WARN_ON(irq_base < 0);
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index bb6f8a52a6b8..4f2d99888afd 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -509,7 +509,7 @@ static void mx31moboard_poweroff(void)
 
 	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
 
-	__raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+	imx_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 }
 
 static int mx31moboard_baseboard;
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index a213e7b9cb1c..34df64f133ed 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -131,7 +131,7 @@ static void qong_init_nor_mtd(void)
  */
 static void qong_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *nand_chip = mtd->priv;
+	struct nand_chip *nand_chip = mtd_to_nand(mtd);
 
 	if (cmd == NAND_CMD_NONE)
 		return;
@@ -190,9 +190,9 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	__raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
-	__raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
-	__raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
+	imx_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3)));
+	imx_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3)));
+	imx_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3)));
 
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index a5b1af6d7441..d32704256781 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -193,4 +193,9 @@ extern struct cpu_op *(*get_cpu_op)(int *op);
 #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
+#define imx_readl	readl_relaxed
+#define imx_readw	readw_relaxed
+#define imx_writel	writel_relaxed
+#define imx_writew	writew_relaxed
+
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 7f270015fe58..711dbbd5badd 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -88,7 +88,7 @@ static void __init imx_smp_prepare_cpus(unsigned int max_cpus)
 	sync_cache_w(&g_diag_reg);
 }
 
-struct smp_operations  imx_smp_ops __initdata = {
+const struct smp_operations imx_smp_ops __initconst = {
 	.smp_init_cpus		= imx_smp_init_cpus,
 	.smp_prepare_cpus	= imx_smp_prepare_cpus,
 	.smp_boot_secondary	= imx_boot_secondary,
@@ -123,7 +123,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
 	iounmap(dcfg_base);
 }
 
-struct smp_operations  ls1021a_smp_ops __initdata = {
+const struct smp_operations ls1021a_smp_ops __initconst = {
 	.smp_prepare_cpus	= ls1021a_smp_prepare_cpus,
 	.smp_boot_secondary	= ls1021a_boot_secondary,
 };
diff --git a/arch/arm/mach-imx/pm-imx25.c b/arch/arm/mach-imx/pm-imx25.c
new file mode 100644
index 000000000000..8bba9fcd96f6
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx25.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2016 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+
+static int imx25_suspend_enter(suspend_state_t state)
+{
+	if (!IS_ENABLED(CONFIG_PM))
+		return 0;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		cpu_do_idle();
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct platform_suspend_ops imx25_suspend_ops = {
+	.enter = imx25_suspend_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+void __init imx25_pm_init(void)
+{
+	suspend_set_ops(&imx25_suspend_ops);
+}
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index 56d02d064fbf..43096c8990d4 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -19,9 +19,9 @@ static int mx27_suspend_enter(suspend_state_t state)
 	switch (state) {
 	case PM_SUSPEND_MEM:
 		/* Clear MPEN and SPEN to disable MPLL/SPLL */
-		cscr = __raw_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		cscr = imx_readl(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
 		cscr &= 0xFFFFFFFC;
-		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
+		imx_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
 		/* Executes WFI */
 		cpu_do_idle();
 		break;
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
index 6a07006ff0f4..94c0898751d8 100644
--- a/arch/arm/mach-imx/pm-imx3.c
+++ b/arch/arm/mach-imx/pm-imx3.c
@@ -22,14 +22,14 @@
  */
 void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
 {
-	int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR);
+	int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR);
 	reg &= ~MXC_CCM_CCMR_LPM_MASK;
 
 	switch (mode) {
 	case MX3_WAIT:
 		if (cpu_is_mx35())
 			reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
-		__raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
+		imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
 		break;
 	default:
 		pr_err("Unknown cpu power mode: %d\n", mode);
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 532d4b08276d..868781fd460c 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -153,15 +153,15 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 	int stop_mode = 0;
 
 	/* always allow platform to issue a deep sleep mode request */
-	plat_lpc = __raw_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
+	plat_lpc = imx_readl(cortex_base + MXC_CORTEXA8_PLAT_LPC) &
 	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
-	ccm_clpcr = __raw_readl(ccm_base + MXC_CCM_CLPCR) &
+	ccm_clpcr = imx_readl(ccm_base + MXC_CCM_CLPCR) &
 		    ~(MXC_CCM_CLPCR_LPM_MASK);
-	arm_srpgcr = __raw_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
+	arm_srpgcr = imx_readl(gpc_base + MXC_SRPG_ARM_SRPGCR) &
 		     ~(MXC_SRPGCR_PCR);
-	empgc0 = __raw_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
+	empgc0 = imx_readl(gpc_base + MXC_SRPG_EMPGC0_SRPGCR) &
 		 ~(MXC_SRPGCR_PCR);
-	empgc1 = __raw_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
+	empgc1 = imx_readl(gpc_base + MXC_SRPG_EMPGC1_SRPGCR) &
 		 ~(MXC_SRPGCR_PCR);
 
 	switch (mode) {
@@ -196,17 +196,17 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 		return;
 	}
 
-	__raw_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
-	__raw_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
-	__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
-	__raw_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
+	imx_writel(plat_lpc, cortex_base + MXC_CORTEXA8_PLAT_LPC);
+	imx_writel(ccm_clpcr, ccm_base + MXC_CCM_CLPCR);
+	imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_ARM_SRPGCR);
+	imx_writel(arm_srpgcr, gpc_base + MXC_SRPG_NEON_SRPGCR);
 
 	if (stop_mode) {
 		empgc0 |= MXC_SRPGCR_PCR;
 		empgc1 |= MXC_SRPGCR_PCR;
 
-		__raw_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
+		imx_writel(empgc0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+		imx_writel(empgc1, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
 	}
 }
 
@@ -228,8 +228,8 @@ static int mx5_suspend_enter(suspend_state_t state)
 		flush_cache_all();
 
 		/*clear the EMPGC0/1 bits */
-		__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
+		imx_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
+		imx_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
 
 		if (imx5_suspend_in_ocram_fn)
 			imx5_suspend_in_ocram_fn(suspend_ocram_base);
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index 8ff8fc0b261c..58924b3844df 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -93,6 +93,7 @@ struct imx6_pm_socdata {
 	const char *src_compat;
 	const char *iomuxc_compat;
 	const char *gpc_compat;
+	const char *pl310_compat;
 	const u32 mmdc_io_num;
 	const u32 *mmdc_io_offset;
 };
@@ -137,11 +138,19 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = {
 	0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
 };
 
+static const u32 imx6ul_mmdc_io_offset[] __initconst = {
+	0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
+	0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
+	0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
+	0x494, 0x4b0,	            /* MODE_CTL, MODE, */
+};
+
 static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
 	.mmdc_compat = "fsl,imx6q-mmdc",
 	.src_compat = "fsl,imx6q-src",
 	.iomuxc_compat = "fsl,imx6q-iomuxc",
 	.gpc_compat = "fsl,imx6q-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
 	.mmdc_io_offset = imx6q_mmdc_io_offset,
 };
@@ -151,6 +160,7 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
 	.src_compat = "fsl,imx6q-src",
 	.iomuxc_compat = "fsl,imx6dl-iomuxc",
 	.gpc_compat = "fsl,imx6q-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
 	.mmdc_io_offset = imx6dl_mmdc_io_offset,
 };
@@ -160,6 +170,7 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
 	.src_compat = "fsl,imx6sl-src",
 	.iomuxc_compat = "fsl,imx6sl-iomuxc",
 	.gpc_compat = "fsl,imx6sl-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
 	.mmdc_io_offset = imx6sl_mmdc_io_offset,
 };
@@ -169,10 +180,21 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
 	.src_compat = "fsl,imx6sx-src",
 	.iomuxc_compat = "fsl,imx6sx-iomuxc",
 	.gpc_compat = "fsl,imx6sx-gpc",
+	.pl310_compat = "arm,pl310-cache",
 	.mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
 	.mmdc_io_offset = imx6sx_mmdc_io_offset,
 };
 
+static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
+	.mmdc_compat = "fsl,imx6ul-mmdc",
+	.src_compat = "fsl,imx6ul-src",
+	.iomuxc_compat = "fsl,imx6ul-iomuxc",
+	.gpc_compat = "fsl,imx6ul-gpc",
+	.pl310_compat = NULL,
+	.mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
+	.mmdc_io_offset = imx6ul_mmdc_io_offset,
+};
+
 /*
  * This structure is for passing necessary data for low level ocram
  * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
@@ -290,7 +312,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
 		val |= BM_CLPCR_SBYOS;
 		if (cpu_is_imx6sl())
 			val |= BM_CLPCR_BYPASS_PMIC_READY;
-		if (cpu_is_imx6sl() || cpu_is_imx6sx())
+		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
 			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
 		else
 			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -330,6 +352,10 @@ static int imx6q_suspend_finish(unsigned long val)
 		 * as we need to float DDR IO.
 		 */
 		local_flush_tlb_all();
+		/* check if need to flush internal L2 cache */
+		if (!((struct imx6_cpu_pm_info *)
+			suspend_ocram_base)->l2_base.vbase)
+			flush_cache_all();
 		imx6_suspend_in_ocram_fn(suspend_ocram_base);
 	}
 
@@ -470,6 +496,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
 		MX6Q_SUSPEND_OCRAM_SIZE, false);
 
+	memset(suspend_ocram_base, 0, sizeof(*pm_info));
 	pm_info = suspend_ocram_base;
 	pm_info->pbase = ocram_pbase;
 	pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
@@ -505,11 +532,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		goto gpc_map_failed;
 	}
 
-	ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
-	if (ret) {
-		pr_warn("%s: failed to get pl310-cache base %d!\n",
-			__func__, ret);
-		goto pl310_cache_map_failed;
+	if (socdata->pl310_compat) {
+		ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat);
+		if (ret) {
+			pr_warn("%s: failed to get pl310-cache base %d!\n",
+				__func__, ret);
+			goto pl310_cache_map_failed;
+		}
 	}
 
 	pm_info->ddr_type = imx_mmdc_get_ddr_type();
@@ -532,13 +561,13 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	goto put_node;
 
 pl310_cache_map_failed:
-	iounmap(&pm_info->gpc_base.vbase);
+	iounmap(pm_info->gpc_base.vbase);
 gpc_map_failed:
-	iounmap(&pm_info->iomuxc_base.vbase);
+	iounmap(pm_info->iomuxc_base.vbase);
 iomuxc_map_failed:
-	iounmap(&pm_info->src_base.vbase);
+	iounmap(pm_info->src_base.vbase);
 src_map_failed:
-	iounmap(&pm_info->mmdc_base.vbase);
+	iounmap(pm_info->mmdc_base.vbase);
 put_node:
 	of_node_put(node);
 
@@ -610,3 +639,8 @@ void __init imx6sx_pm_init(void)
 {
 	imx6_pm_common_init(&imx6sx_pm_data);
 }
+
+void __init imx6ul_pm_init(void)
+{
+	imx6_pm_common_init(&imx6ul_pm_data);
+}
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 45f7f4e0a447..70b083fe934a 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -73,7 +73,7 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
 	return 0;
 }
 
-static struct reset_control_ops imx_src_ops = {
+static const struct reset_control_ops imx_src_ops = {
 	.reset = imx_src_reset_module,
 };
 
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
index b99987b023fa..76ee2ceec8d5 100644
--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -79,12 +79,15 @@
 	/* sync L2 cache to drain L2's buffers to DRAM. */
 #ifdef CONFIG_CACHE_L2X0
 	ldr	r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
+	teq	r11, #0
+	beq	6f
 	mov	r6, #0x0
 	str	r6, [r11, #L2X0_CACHE_SYNC]
 1:
 	ldr	r6, [r11, #L2X0_CACHE_SYNC]
 	ands	r6, r6, #0x1
 	bne	1b
+6:
 #endif
 
 	.endm
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 51c35013b673..105d1ce4ed9d 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -54,7 +54,7 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 		wcr_enable = (1 << 2);
 
 	/* Assert SRS signal */
-	__raw_writew(wcr_enable, wdog_base);
+	imx_writew(wcr_enable, wdog_base);
 	/*
 	 * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
 	 * written twice), we add another two writes to ensure there must be at
@@ -62,8 +62,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
 	 * the target check here, since the writes shouldn't be a huge burden
 	 * for other platforms.
 	 */
-	__raw_writew(wcr_enable, wdog_base);
-	__raw_writew(wcr_enable, wdog_base);
+	imx_writew(wcr_enable, wdog_base);
+	imx_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -106,6 +106,9 @@ void __init imx_init_l2cache(void)
 		goto out;
 	}
 
+	if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)
+		goto skip_if_enabled;
+
 	/* Configure the L2 PREFETCH and POWER registers */
 	val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL);
 	val |= 0x70800000;
@@ -122,6 +125,7 @@ void __init imx_init_l2cache(void)
 		val &= ~(1 << 30 | 1 << 23);
 	writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL);
 
+skip_if_enabled:
 	iounmap(l2x0_base);
 	of_node_put(np);
 
diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c
index 4de65eeda1eb..ae23d50f7861 100644
--- a/arch/arm/mach-imx/tzic.c
+++ b/arch/arm/mach-imx/tzic.c
@@ -65,10 +65,10 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
 		return -EINVAL;
 	mask = 1U << (irq & 0x1F);
 
-	value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
+	value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
 	if (type)
 		value &= ~mask;
-	__raw_writel(value, tzic_base + TZIC_INTSEC0(index));
+	imx_writel(value, tzic_base + TZIC_INTSEC0(index));
 
 	return 0;
 }
@@ -82,15 +82,15 @@ static void tzic_irq_suspend(struct irq_data *d)
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	int idx = d->hwirq >> 5;
 
-	__raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
+	imx_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
 }
 
 static void tzic_irq_resume(struct irq_data *d)
 {
 	int idx = d->hwirq >> 5;
 
-	__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
-		     tzic_base + TZIC_WAKEUP0(idx));
+	imx_writel(imx_readl(tzic_base + TZIC_ENSET0(idx)),
+		   tzic_base + TZIC_WAKEUP0(idx));
 }
 
 #else
@@ -135,8 +135,8 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
 		handled = 0;
 
 		for (i = 0; i < 4; i++) {
-			stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
-				__raw_readl(tzic_base + TZIC_INTSEC0(i));
+			stat = imx_readl(tzic_base + TZIC_HIPND(i)) &
+				imx_readl(tzic_base + TZIC_INTSEC0(i));
 
 			while (stat) {
 				handled = 1;
@@ -166,18 +166,18 @@ void __init tzic_init_irq(void)
 	/* put the TZIC into the reset value with
 	 * all interrupts disabled
 	 */
-	i = __raw_readl(tzic_base + TZIC_INTCNTL);
+	i = imx_readl(tzic_base + TZIC_INTCNTL);
 
-	__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
-	__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
-	__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+	imx_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+	imx_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+	imx_writel(0x02, tzic_base + TZIC_SYNCCTRL);
 
 	for (i = 0; i < 4; i++)
-		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+		imx_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
 
 	/* disable all interrupts */
 	for (i = 0; i < 4; i++)
-		__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+		imx_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
 
 	/* all IRQ no FIQ Warning :: No selection */
 
@@ -214,13 +214,13 @@ int tzic_enable_wake(void)
 {
 	unsigned int i;
 
-	__raw_writel(1, tzic_base + TZIC_DSMINT);
-	if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+	imx_writel(1, tzic_base + TZIC_DSMINT);
+	if (unlikely(imx_readl(tzic_base + TZIC_DSMINT) == 0))
 		return -EAGAIN;
 
 	for (i = 0; i < 4; i++)
-		__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
-			     tzic_base + TZIC_WAKEUP0(i));
+		imx_writel(imx_readl(tzic_base + TZIC_ENSET0(i)),
+			   tzic_base + TZIC_WAKEUP0(i));
 
 	return 0;
 }
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 02d083489a26..b2a85ba13f08 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -1,30 +1,23 @@
-config ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+menuconfig ARCH_INTEGRATOR
+	bool "ARM Ltd. Integrator family"
+	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select AUTO_ZRELADDR
-	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select ICST
 	select MFD_SYSCON
-	select MULTI_IRQ_HANDLER
 	select PLAT_VERSATILE
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
 	select POWER_SUPPLY
 	select SOC_INTEGRATOR_CM
 	select SPARSE_IRQ
-	select USE_OF
 	select VERSATILE_FPGA_IRQ
 	help
 	  Support for ARM's Integrator platform.
 
 if ARCH_INTEGRATOR
 
-menu "Integrator Options"
-
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
 	select CLKSRC_MMIO
@@ -36,19 +29,6 @@ config ARCH_INTEGRATOR_AP
 	  Include support for the ARM(R) Integrator/AP and
 	  Integrator/PP2 platforms.
 
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	select ARCH_CINTEGRATOR
-	select ARM_TIMER_SP804
-	select SERIAL_AMBA_PL011 if TTY
-	select SERIAL_AMBA_PL011_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config ARCH_CINTEGRATOR
-	bool
-
 config INTEGRATOR_IMPD1
 	bool "Include support for Integrator/IM-PD1"
 	depends on ARCH_INTEGRATOR_AP
@@ -63,6 +43,119 @@ config INTEGRATOR_IMPD1
 	  To compile this driver as a module, choose M here: the
 	  module will be called impd1.
 
-endmenu
+config INTEGRATOR_CM7TDMI
+	bool "Integrator/CM7TDMI core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4 && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CM720T
+	bool "Integrator/CM720T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM720T
+
+config INTEGRATOR_CM740T
+	bool "Integrator/CM740T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM740T
+
+config INTEGRATOR_CM920T
+	bool "Integrator/CM920T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T
+	select CPU_ARM920T
+
+config INTEGRATOR_CM922T_XA10
+	bool "Integrator/CM922T-XA10 core module"
+	depends on ARCH_MULTI_V4T
+	depends on ARCH_INTEGRATOR_AP
+	select CPU_ARM922T
+
+config INTEGRATOR_CM926EJS
+	bool "Integrator/CM926EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CM940T
+	bool "Integrator/CM940T core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM940T
+
+config INTEGRATOR_CM946ES
+	bool "Integrator/CM946E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5 && !MMU
+	select CPU_ARM946E
+
+config INTEGRATOR_CM966ES
+	bool "Integrator/CM966E-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on BROKEN # no kernel support
+
+config INTEGRATOR_CM10200E_REV0
+	bool "Integrator/CM10200E rev.0 core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020
+
+config INTEGRATOR_CM10200E
+	bool "Integrator/CM10200E core module"
+	depends on ARCH_INTEGRATOR_AP && n
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1020E
+
+config INTEGRATOR_CM10220E
+	bool "Integrator/CM10220E core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1022
+
+config INTEGRATOR_CM1026EJS
+	bool "Integrator/CM1026EJ-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM1026
+
+config INTEGRATOR_CM1136JFS
+	bool "Integrator/CM1136JF-S core module"
+	depends on ARCH_INTEGRATOR_AP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_INTEGRATOR_CP
+	bool "Support Integrator/CP platform"
+	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	select ARM_TIMER_SP804
+	select SERIAL_AMBA_PL011 if TTY
+	select SERIAL_AMBA_PL011_CONSOLE if TTY
+	select SOC_BUS
+	help
+	  Include support for the ARM(R) Integrator CP platform.
+
+config INTEGRATOR_CT7T
+	bool "Integrator/CT7TD (ARM7TDMI) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V4T && !MMU
+	select CPU_ARM7TDMI
+
+config INTEGRATOR_CT926
+	bool "Integrator/CT926 (ARM926EJ-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+
+config INTEGRATOR_CTB36
+	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
+	depends on ARCH_INTEGRATOR_CP
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+
+config ARCH_CINTEGRATOR
+	depends on ARCH_INTEGRATOR_CP
+	def_bool y
 
 endif
diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot
deleted file mode 100644
index ff0a4b5b0a82..000000000000
--- a/arch/arm/mach-integrator/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
deleted file mode 100644
index 59f42b535572..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/pci.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef _IOP13XX_PCI_H_
-#define _IOP13XX_PCI_H_
-#include <linux/io.h>
-#include <mach/irqs.h>
-
-struct pci_sys_data;
-struct hw_pci;
-int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
-void iop13xx_atu_select(struct hw_pci *plat_pci);
-void iop13xx_pci_init(void);
-void iop13xx_map_pci_memory(void);
-
-#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
-			       PCI_STATUS_SIG_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_TARGET_ABORT | \
-			       PCI_STATUS_REC_MASTER_ABORT | \
-			       PCI_STATUS_SIG_SYSTEM_ERROR | \
-	 		       PCI_STATUS_DETECTED_PARITY)
-
-#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
-				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
-				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
-				    IOP13XX_ATUE_STAT_ERR_COR |	       \
-				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
-				    IOP13XX_ATUE_STAT_CRS |	       \
-				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
-				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
-
-#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
-				    IOP13XX_ATUX_STAT_REC_SCEM |       \
-				    IOP13XX_ATUX_STAT_TX_SERR |	       \
-				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
-				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_REC_SERR |       \
-				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
-				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
-				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
-				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
-
-/* PCI interrupts
- */
-#define ATUX_INTA IRQ_IOP13XX_XINT0
-#define ATUX_INTB IRQ_IOP13XX_XINT1
-#define ATUX_INTC IRQ_IOP13XX_XINT2
-#define ATUX_INTD IRQ_IOP13XX_XINT3
-
-#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
-#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
-#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
-#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
-
-#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9cd07d396093..d255ab5ad1a5 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -23,7 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pci.h>
+#include "pci.h"
 #include <asm/mach/time.h>
 #include <mach/time.h>
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index b3ec11cb707e..33eeaf1fa11d 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -23,7 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pci.h>
+#include "pci.h"
 #include <asm/mach/time.h>
 #include <mach/time.h>
 
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index 623d85a4af2d..c702cc4092de 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -25,7 +25,7 @@
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/msi.h>
+#include "msi.h"
 
 /* INTCTL0 CP6 R0 Page 4
  */
diff --git a/arch/arm/mach-iop13xx/include/mach/msi.h b/arch/arm/mach-iop13xx/msi.h
index b80c5ae17e99..b80c5ae17e99 100644
--- a/arch/arm/mach-iop13xx/include/mach/msi.h
+++ b/arch/arm/mach-iop13xx/msi.h
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 9082b84aeebb..204eb4460271 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -27,7 +27,7 @@
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <mach/pci.h>
+#include "pci.h"
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/pci.h b/arch/arm/mach-iop13xx/pci.h
index d45a80b3080e..71b9c57e1fde 100644
--- a/arch/arm/mach-iop13xx/pci.h
+++ b/arch/arm/mach-iop13xx/pci.h
@@ -1,6 +1,64 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <linux/io.h>
+#include <mach/irqs.h>
+
 #include <linux/types.h>
 
 extern void __iomem *iop13xx_atue_mem_base;
 extern void __iomem *iop13xx_atux_mem_base;
 extern size_t iop13xx_atue_mem_size;
 extern size_t iop13xx_atux_mem_size;
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
+			       PCI_STATUS_SIG_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+	 		       PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
+				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
+				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
+				    IOP13XX_ATUE_STAT_ERR_COR |	       \
+				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
+				    IOP13XX_ATUE_STAT_CRS |	       \
+				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
+				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
+				    IOP13XX_ATUX_STAT_REC_SCEM |       \
+				    IOP13XX_ATUX_STAT_TX_SERR |	       \
+				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_REC_SERR |       \
+				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 1cb6f2f02880..26874f608ca9 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -27,7 +27,7 @@
 #include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/export.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/sched_clock.h>
@@ -461,7 +461,7 @@ void __init ixp4xx_sys_init(void)
 
 	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
 
-	gpiochip_add(&ixp4xx_gpio_chip);
+	gpiochip_add_data(&ixp4xx_gpio_chip, NULL);
 
 	if (cpu_is_ixp46x()) {
 		int region;
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index b02439019963..7a0c13bf4269 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -143,7 +143,7 @@ static inline void __indirect_writesl(volatile void __iomem *bus_addr,
 		writel(*vaddr++, bus_addr);
 }
 
-static inline unsigned char __indirect_readb(const volatile void __iomem *p)
+static inline u8 __indirect_readb(const volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
@@ -166,7 +166,7 @@ static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
 		*vaddr++ = readb(bus_addr);
 }
 
-static inline unsigned short __indirect_readw(const volatile void __iomem *p)
+static inline u16 __indirect_readw(const volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
@@ -189,7 +189,7 @@ static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
 		*vaddr++ = readw(bus_addr);
 }
 
-static inline unsigned long __indirect_readl(const volatile void __iomem *p)
+static inline u32 __indirect_readl(const volatile void __iomem *p)
 {
 	u32 addr = (__force u32)p;
 	u32 data;
@@ -350,7 +350,7 @@ static inline void insl(u32 io_addr, void *p, u32 count)
 					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
 
 #define	ioread8(p)			ioread8(p)
-static inline unsigned int ioread8(const void __iomem *addr)
+static inline u8 ioread8(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
@@ -378,7 +378,7 @@ static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
 }
 
 #define	ioread16(p)			ioread16(p)
-static inline unsigned int ioread16(const void __iomem *addr)
+static inline u16 ioread16(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
@@ -407,7 +407,7 @@ static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
 }
 
 #define	ioread32(p)			ioread32(p)
-static inline unsigned int ioread32(const void __iomem *addr)
+static inline u32 ioread32(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
index c5bae9c035d5..b7ddd27419c2 100644
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -395,204 +395,6 @@
 #define CRP_AD_CBE_BESL         20
 #define CRP_AD_CBE_WRITE	0x00010000
 
-
-/*
- * USB Device Controller
- *
- * These are used by the USB gadget driver, so they don't follow the
- * IXP4XX_ naming convetions.
- *
- */
-# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
-
-/* UDC Undocumented - Reserved1 */
-#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
-/* UDC Undocumented - Reserved2 */
-#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
-/* UDC Undocumented - Reserved3 */
-#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
-/* UDC Control Register */
-#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
-/* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
-/* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
-/* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
-/* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
-/* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
-/* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
-/* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
-/* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
-/* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
-/* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
-/* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
-/* UDC Endpoint 11 (IN) Control/Status Register */
-#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
-/* UDC Endpoint 12 (OUT) Control/Status Register */
-#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
-/* UDC Endpoint 13 (IN) Control/Status Register */
-#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
-/* UDC Endpoint 14 (OUT) Control/Status Register */
-#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
-/* UDC Endpoint 15 (Interrupt) Control/Status Register */
-#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
-/* UDC Frame Number Register High */
-#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
-/* UDC Frame Number Register Low */
-#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
-/* UDC Byte Count Reg 2 */
-#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
-/* UDC Byte Count Reg 4 */
-#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
-/* UDC Byte Count Reg 7 */
-#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
-/* UDC Byte Count Reg 9 */
-#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
-/* UDC Byte Count Reg 12 */
-#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
-/* UDC Byte Count Reg 14 */
-#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
-/* UDC Endpoint 0 Data Register */
-#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
-/* UDC Endpoint 1 Data Register */
-#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
-/* UDC Endpoint 2 Data Register */
-#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
-/* UDC Endpoint 3 Data Register */
-#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
-/* UDC Endpoint 4 Data Register */
-#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
-/* UDC Endpoint 5 Data Register */
-#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
-/* UDC Endpoint 6 Data Register */
-#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
-/* UDC Endpoint 7 Data Register */
-#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
-/* UDC Endpoint 8 Data Register */
-#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
-/* UDC Endpoint 9 Data Register */
-#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
-/* UDC Endpoint 10 Data Register */
-#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
-/* UDC Endpoint 11 Data Register */
-#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
-/* UDC Endpoint 12 Data Register */
-#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
-/* UDC Endpoint 13 Data Register */
-#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
-/* UDC Endpoint 14 Data Register */
-#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
-/* UDC Endpoint 15 Data Register */
-#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
-/* UDC Interrupt Control Register 0 */
-#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
-/* UDC Interrupt Control Register 1 */
-#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
-/* UDC Status Interrupt Register 0 */
-#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
-/* UDC Status Interrupt Register 1 */
-#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
-
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
 /* "fuse" bits of IXP_EXP_CFG2 */
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index e7b8befa8729..508c2d7786e2 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -76,8 +76,8 @@ static struct mtd_partition ixdp425_partitions[] = {
 static void
 ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
-	int offset = (int)this->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
+	int offset = (int)nand_get_controller_data(this);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_NCE) {
@@ -88,7 +88,7 @@ ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 
 		offset = (ctrl & NAND_CLE) ? IXDP425_NAND_CMD_BYTE : 0;
 		offset |= (ctrl & NAND_ALE) ? IXDP425_NAND_ADDR_BYTE : 0;
-		this->priv = (void *)offset;
+		nand_set_controller_data(this, (void *)offset);
 	}
 
 	if (cmd != NAND_CMD_NONE)
diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot
deleted file mode 100644
index f3835c43af61..000000000000
--- a/arch/arm/mach-keystone/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-zreladdr-y	:= 0x80008000
diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c
index e288010522f9..e6b9cb1e6709 100644
--- a/arch/arm/mach-keystone/keystone.c
+++ b/arch/arm/mach-keystone/keystone.c
@@ -63,7 +63,7 @@ static void __init keystone_init(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static phys_addr_t keystone_virt_to_idmap(unsigned long x)
+static unsigned long keystone_virt_to_idmap(unsigned long x)
 {
 	return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START;
 }
@@ -97,6 +97,10 @@ static long long __init keystone_pv_fixup(void)
 }
 
 static const char *const keystone_match[] __initconst = {
+	"ti,k2hk",
+	"ti,k2e",
+	"ti,k2l",
+	"ti,k2g",
 	"ti,keystone",
 	NULL,
 };
diff --git a/arch/arm/mach-keystone/keystone.h b/arch/arm/mach-keystone/keystone.h
index cd04a1c14de8..33eaa037af5a 100644
--- a/arch/arm/mach-keystone/keystone.h
+++ b/arch/arm/mach-keystone/keystone.h
@@ -15,7 +15,7 @@
 
 #ifndef __ASSEMBLER__
 
-extern struct smp_operations keystone_smp_ops;
+extern const struct smp_operations keystone_smp_ops;
 extern void secondary_startup(void);
 extern u32 keystone_cpu_smc(u32 command, u32 cpu, u32 addr);
 extern int keystone_pm_runtime_init(void);
diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c
index 4bbb18463bfd..5665276972ec 100644
--- a/arch/arm/mach-keystone/platsmp.c
+++ b/arch/arm/mach-keystone/platsmp.c
@@ -39,6 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu,
 	return error;
 }
 
-struct smp_operations keystone_smp_ops __initdata = {
+const struct smp_operations keystone_smp_ops __initconst = {
 	.smp_boot_secondary	= keystone_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 9f9c0441a917..e4d709c8ed32 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/gpio-ks8695.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index d37c218c3584..13537e9c5485 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -28,7 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/gpio-ks8695.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 3acbdfd31391..69cfb9935fc1 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -19,7 +19,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/gpio-ks8695.h>
-#include <mach/devices.h>
+#include "devices.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index f2658168eeff..478ebd1f2b0f 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/devices.h>
+#include "devices.h"
 #include <mach/regs-gpio.h>
 #include <mach/gpio-ks8695.h>
 #include "generic.h"
@@ -80,7 +80,7 @@ static void __init og_pci_bus_reset(void)
 #define	S8250_VIRT	0xf4000000
 #define	S8250_SIZE	0x00100000
 
-static struct __initdata map_desc og_io_desc[] = {
+static struct map_desc og_io_desc[] __initdata = {
 	{
 		.virtual	= S8250_VIRT,
 		.pfn		= __phys_to_pfn(S8250_PHYS),
diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
index fdf2352d2cf8..46e455c3821b 100644
--- a/arch/arm/mach-ks8695/board-sg.c
+++ b/arch/arm/mach-ks8695/board-sg.c
@@ -16,7 +16,7 @@
 #include <linux/mtd/partitions.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/devices.h>
+#include "devices.h"
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index ddb24222918e..7a1c4caa1ab5 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -30,11 +30,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/regs-sys.h>
+#include "regs-sys.h"
 #include <mach/regs-misc.h>
 
 
-static struct __initdata map_desc ks8695_io_desc[] = {
+static struct map_desc ks8695_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)KS8695_IO_VA,
 		.pfn		= __phys_to_pfn(KS8695_IO_PA),
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 47399bc3c024..61cf20beb45f 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -24,9 +24,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/regs-wan.h>
-#include <mach/regs-lan.h>
-#include <mach/regs-hpna.h>
+#include "regs-wan.h"
+#include "regs-lan.h"
+#include "regs-hpna.h"
 #include <mach/regs-switch.h>
 #include <mach/regs-misc.h>
 
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/devices.h
index 1e6594a0f297..1e6594a0f297 100644
--- a/arch/arm/mach-ks8695/include/mach/devices.h
+++ b/arch/arm/mach-ks8695/devices.h
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index c089a1aea674..a001c7c34df2 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <mach/regs-uart.h>
 
-static void putc(char c)
+static inline void putc(char c)
 {
 	while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
 		barrier();
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index c1bc4c3716ed..577a35f75c8a 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -33,8 +33,8 @@
 #include <asm/mach/pci.h>
 #include <mach/hardware.h>
 
-#include <mach/devices.h>
-#include <mach/regs-pci.h>
+#include "devices.h"
+#include "regs-pci.h"
 
 
 static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/regs-hpna.h
index 815ce5c2e3b9..815ce5c2e3b9 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-hpna.h
+++ b/arch/arm/mach-ks8695/regs-hpna.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/regs-lan.h
index 82c5f3791afb..82c5f3791afb 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-lan.h
+++ b/arch/arm/mach-ks8695/regs-lan.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/regs-mem.h
index 55806bc68ce3..55806bc68ce3 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-mem.h
+++ b/arch/arm/mach-ks8695/regs-mem.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/regs-pci.h
index 75a9db6edbd9..75a9db6edbd9 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-pci.h
+++ b/arch/arm/mach-ks8695/regs-pci.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/regs-sys.h
index 57c20be0c129..57c20be0c129 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-sys.h
+++ b/arch/arm/mach-ks8695/regs-sys.h
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/regs-wan.h
index c475bed22b8e..c475bed22b8e 100644
--- a/arch/arm/mach-ks8695/include/mach/regs-wan.h
+++ b/arch/arm/mach-ks8695/regs-wan.h
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index f5db805ab958..c70709ada692 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -2,7 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-y	:= timer.o irq.o common.o serial.o clock.o
+obj-y	:= irq.o common.o serial.o
 obj-y	+= pm.o suspend.o
 obj-y	+= phy3250.o
-
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
deleted file mode 100644
index 661c8f4b2310..000000000000
--- a/arch/arm/mach-lpc32xx/clock.c
+++ /dev/null
@@ -1,1284 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/clock.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * LPC32xx clock management driver overview
- *
- * The LPC32XX contains a number of high level system clocks that can be
- * generated from different sources. These system clocks are used to
- * generate the CPU and bus rates and the individual peripheral clocks in
- * the system. When Linux is started by the boot loader, the system
- * clocks are already running. Stopping a system clock during normal
- * Linux operation should never be attempted, as peripherals that require
- * those clocks will quit working (ie, DRAM).
- *
- * The LPC32xx high level clock tree looks as follows. Clocks marked with
- * an asterisk are always on and cannot be disabled. Clocks marked with
- * an ampersand can only be disabled in CPU suspend mode. Clocks marked
- * with a caret are always on if it is the selected clock for the SYSCLK
- * source. The clock that isn't used for SYSCLK can be enabled and
- * disabled normally.
- *                               32KHz oscillator*
- *                               /      |      \
- *                             RTC*   PLL397^ TOUCH
- *                                     /
- *               Main oscillator^     /
- *                   |        \      /
- *                   |         SYSCLK&
- *                   |            \
- *                   |             \
- *                USB_PLL       HCLK_PLL&
- *                   |           |    |
- *            USB host/device  PCLK&  |
- *                               |    |
- *                             Peripherals
- *
- * The CPU and chip bus rates are derived from the HCLK PLL, which can
- * generate various clock rates up to 266MHz and beyond. The internal bus
- * rates (PCLK and HCLK) are generated from dividers based on the HCLK
- * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate,
- * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high
- * level clocks are based on either HCLK or PCLK, but have their own
- * dividers as part of the IP itself. Because of this, the system clock
- * rates should not be changed.
- *
- * The HCLK PLL is clocked from SYSCLK, which can be derived from the
- * main oscillator or PLL397. PLL397 generates a rate that is 397 times
- * the 32KHz oscillator rate. The main oscillator runs at the selected
- * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate
- * is normally 13MHz, but depends on the selection of external crystals
- * or oscillators. If USB operation is required, the main oscillator must
- * be used in the system.
- *
- * Switching SYSCLK between sources during normal Linux operation is not
- * supported. SYSCLK is preset in the bootloader. Because of the
- * complexities of clock management during clock frequency changes,
- * there are some limitations to the clock driver explained below:
- * - The PLL397 and main oscillator can be enabled and disabled by the
- *   clk_enable() and clk_disable() functions unless SYSCLK is based
- *   on that clock. This allows the other oscillator that isn't driving
- *   the HCLK PLL to be used as another system clock that can be routed
- *   to an external pin.
- * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with
- *   this driver.
- * - HCLK and PCLK rates cannot be changed as part of this driver.
- * - Most peripherals have their own dividers are part of the peripheral
- *   block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates
- *   will also impact the individual peripheral rates.
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "clock.h"
-#include "common.h"
-
-static DEFINE_SPINLOCK(global_clkregs_lock);
-
-static int usb_pll_enable, usb_pll_valid;
-
-static struct clk clk_armpll;
-static struct clk clk_usbpll;
-
-/*
- * Post divider values for PLLs based on selected register value
- */
-static const u32 pll_postdivs[4] = {1, 2, 4, 8};
-
-static unsigned long local_return_parent_rate(struct clk *clk)
-{
-	/*
-	 * If a clock has a rate of 0, then it inherits it's parent
-	 * clock rate
-	 */
-	while (clk->rate == 0)
-		clk = clk->parent;
-
-	return clk->rate;
-}
-
-/* 32KHz clock has a fixed rate and is not stoppable */
-static struct clk osc_32KHz = {
-	.rate		= LPC32XX_CLOCK_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_pll397_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-	} else {
-		/* Enable PLL397 */
-		reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS;
-		__raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL);
-
-		/* Wait for PLL397 lock */
-		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
-			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int local_oscmain_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-	if (enable == 0) {
-		reg |= LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-	} else {
-		/* Enable main oscillator */
-		reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE;
-		__raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL);
-
-		/* Wait for main oscillator to start */
-		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
-			time_before(jiffies, timeout))
-			cpu_relax();
-
-		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
-			LPC32XX_CLKPWR_MOSC_DISABLE) != 0)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static struct clk osc_pll397 = {
-	.parent		= &osc_32KHz,
-	.enable		= local_pll397_enable,
-	.rate		= LPC32XX_CLOCK_OSC_FREQ * 397,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk osc_main = {
-	.enable		= local_oscmain_enable,
-	.rate		= LPC32XX_MAIN_OSC_FREQ,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_sys;
-
-/*
- * Convert a PLL register value to a PLL output frequency
- */
-u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval)
-{
-	struct clk_pll_setup pllcfg;
-
-	pllcfg.cco_bypass_b15 = 0;
-	pllcfg.direct_output_b14 = 0;
-	pllcfg.fdbk_div_ctrl_b13 = 0;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0)
-		pllcfg.cco_bypass_b15 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0)
-		pllcfg.direct_output_b14 = 1;
-	if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0)
-		pllcfg.fdbk_div_ctrl_b13 = 1;
-	pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF);
-	pllcfg.pll_n = 1 + ((regval >> 9) & 0x3);
-	pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)];
-
-	return clk_check_pll_setup(inputclk, &pllcfg);
-}
-
-/*
- * Setup the HCLK PLL with a PLL structure
- */
-static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup)
-{
-	u32 tv, tmp = 0;
-
-	if (PllSetup->analog_on != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP;
-	if (PllSetup->cco_bypass_b15 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS;
-	if (PllSetup->direct_output_b14 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS;
-	if (PllSetup->fdbk_div_ctrl_b13 != 0)
-		tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK;
-
-	tv = ffs(PllSetup->pll_p) - 1;
-	if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3))
-		return 0;
-
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1);
-	tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1);
-
-	return tmp;
-}
-
-/*
- * Update the ARM core PLL frequency rate variable from the actual PLL setting
- */
-static void local_update_armpll_rate(void)
-{
-	u32 clkin, pllreg;
-
-	clkin = clk_armpll.parent->rate;
-	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-
-	clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg);
-}
-
-/*
- * Find a PLL configuration for the selected input frequency
- */
-static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq,
-	struct clk_pll_setup *pllsetup)
-{
-	u32 ifreq, freqtol, m, n, p, fclkout;
-
-	/* Determine frequency tolerance limits */
-	freqtol = target_freq / 250;
-	ifreq = pllin_freq;
-
-	/* Is direct bypass mode possible? */
-	if (abs(pllin_freq - target_freq) <= freqtol) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 1;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_p = pll_postdivs[0];
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		return clk_check_pll_setup(ifreq, pllsetup);
-	} else if (target_freq <= ifreq) {
-		pllsetup->analog_on = 0;
-		pllsetup->cco_bypass_b15 = 1;
-		pllsetup->direct_output_b14 = 0;
-		pllsetup->fdbk_div_ctrl_b13 = 1;
-		pllsetup->pll_n = 1;
-		pllsetup->pll_m = 1;
-		for (p = 0; p <= 3; p++) {
-			pllsetup->pll_p = pll_postdivs[p];
-			fclkout = clk_check_pll_setup(ifreq, pllsetup);
-			if (abs(target_freq - fclkout) <= freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is direct mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 1;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	pllsetup->pll_p = pll_postdivs[0];
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			/* Compute output frequency for this value */
-			pllsetup->pll_n = n;
-			pllsetup->pll_m = m;
-			fclkout = clk_check_pll_setup(ifreq,
-				pllsetup);
-			if (abs(target_freq - fclkout) <=
-				freqtol)
-				return fclkout;
-		}
-	}
-
-	/* Is integer mode possible? */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 1;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	/* Try non-integer mode */
-	pllsetup->analog_on = 1;
-	pllsetup->cco_bypass_b15 = 0;
-	pllsetup->direct_output_b14 = 0;
-	pllsetup->fdbk_div_ctrl_b13 = 0;
-	for (m = 1; m <= 256; m++) {
-		for (n = 1; n <= 4; n++) {
-			for (p = 0; p < 4; p++) {
-				/* Compute output frequency */
-				pllsetup->pll_p = pll_postdivs[p];
-				pllsetup->pll_n = n;
-				pllsetup->pll_m = m;
-				fclkout = clk_check_pll_setup(
-					ifreq, pllsetup);
-				if (abs(target_freq - fclkout) <= freqtol)
-					return fclkout;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static struct clk clk_armpll = {
-	.parent		= &clk_sys,
-	.get_rate	= local_return_parent_rate,
-};
-
-/*
- * Setup the USB PLL with a PLL structure
- */
-static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup)
-{
-	u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF;
-	reg |= tmp;
-	__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-	return clk_check_pll_setup(clk_usbpll.parent->rate,
-		pHCLKPllSetup);
-}
-
-static int local_usbpll_enable(struct clk *clk, int enable)
-{
-	u32 reg;
-	int ret = 0;
-	unsigned long timeout = jiffies + msecs_to_jiffies(20);
-
-	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-
-	__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 |
-		LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-		LPC32XX_CLKPWR_USB_CTRL);
-	__raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1,
-		LPC32XX_CLKPWR_USB_CTRL);
-
-	if (enable && usb_pll_valid && usb_pll_enable) {
-		ret = -ENODEV;
-		/*
-		 * If the PLL rate has been previously set, then the rate
-		 * in the PLL register is valid and can be enabled here.
-		 * Otherwise, it needs to be enabled as part of setrate.
-		 */
-
-		/*
-		 * Gate clock into PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Enable PLL
-		 */
-		reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP;
-		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
-
-		/*
-		 * Wait for PLL to lock
-		 */
-		while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
-			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
-			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
-				ret = 0;
-			else
-				udelay(10);
-		}
-
-		/*
-		 * Gate clock from PLL if PLL is locked
-		 */
-		if (ret == 0) {
-			__raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2,
-				LPC32XX_CLKPWR_USB_CTRL);
-		} else {
-			__raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 |
-				LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP),
-				LPC32XX_CLKPWR_USB_CTRL);
-		}
-	} else if ((enable == 0) && usb_pll_valid  && usb_pll_enable) {
-		usb_pll_valid = 0;
-		usb_pll_enable = 0;
-	}
-
-	return ret;
-}
-
-static unsigned long local_usbpll_round_rate(struct clk *clk,
-	unsigned long rate)
-{
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return 0;
-
-	return clk_check_pll_setup(clkin, &pllsetup);
-}
-
-static int local_usbpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -ENODEV;
-	u32 clkin, usbdiv;
-	struct clk_pll_setup pllsetup;
-
-	/*
-	 * Unlike other clocks, this clock has a KHz input rate, so bump
-	 * it up to work with the PLL function
-	 */
-	rate = rate * 1000;
-
-	clkin = clk->get_rate(clk->parent);
-	usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) &
-		LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1;
-	clkin = clkin / usbdiv;
-
-	/* Try to find a good rate setup */
-	if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0)
-		return -EINVAL;
-
-	/*
-	 * Disable PLL clocks during PLL change
-	 */
-	local_usbpll_enable(clk, 0);
-	pllsetup.analog_on = 0;
-	local_clk_usbpll_setup(&pllsetup);
-
-	/*
-	 * Start USB PLL and check PLL status
-	 */
-
-	usb_pll_valid = 1;
-	usb_pll_enable = 1;
-
-	ret = local_usbpll_enable(clk, 1);
-	if (ret >= 0)
-		clk->rate = clk_check_pll_setup(clkin, &pllsetup);
-
-	return ret;
-}
-
-static struct clk clk_usbpll = {
-	.parent		= &osc_main,
-	.set_rate	= local_usbpll_set_rate,
-	.enable		= local_usbpll_enable,
-	.rate		= 48000, /* In KHz */
-	.get_rate	= local_return_parent_rate,
-	.round_rate	= local_usbpll_round_rate,
-};
-
-static u32 clk_get_hclk_div(void)
-{
-	static const u32 hclkdivs[4] = {1, 2, 4, 4};
-	return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW(
-		__raw_readl(LPC32XX_CLKPWR_HCLK_DIV))];
-}
-
-static struct clk clk_hclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_pclk = {
-	.parent		= &clk_armpll,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(clk->enable_reg);
-
-	if (enable == 0)
-		tmp &= ~clk->enable_mask;
-	else
-		tmp |= clk->enable_mask;
-
-	__raw_writel(tmp, clk->enable_reg);
-
-	return 0;
-}
-
-/* Peripheral clock sources */
-static struct clk clk_timer0 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer1 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_timer3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_mpwm = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1,
-	.enable_mask	= LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_wdt = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_TIMER_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_vfp9 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DEBUG_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT,
-	.get_rate	= local_return_parent_rate,
-};
-static struct clk clk_dma = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_DMA_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_pwm = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_PWM_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN |
-			  LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK |
-			  LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK |
-			  LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1),
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart3 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart4 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart5 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_uart6 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_UART_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2C_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2c2 = {
-	.parent		= &clk_pclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= io_p2v(LPC32XX_USB_BASE + 0xFF4),
-	.enable_mask	= 0x4,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_ssp1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_SSP_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_kscan = {
-	.parent		= &osc_32KHz,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_KEY_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_nand = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN |
-			  LPC32XX_CLKPWR_NANDCLK_SEL_SLC,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_nand_mlc = {
-	.parent         = &clk_hclk,
-	.enable         = local_onoff_enable,
-	.enable_reg     = LPC32XX_CLKPWR_NAND_CLK_CTRL,
-	.enable_mask    = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN |
-			  LPC32XX_CLKPWR_NANDCLK_DMA_INT |
-			  LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC,
-	.get_rate       = local_return_parent_rate,
-};
-
-static struct clk clk_i2s0 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_i2s1 = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_I2S_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN |
-			  LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_net = {
-	.parent		= &clk_hclk,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MACCLK_CTRL,
-	.enable_mask	= (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN |
-		LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN),
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_rtc = {
-	.parent		= &osc_32KHz,
-	.rate		= 1, /* 1 Hz */
-	.get_rate	= local_return_parent_rate,
-};
-
-static int local_usb_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	if (enable) {
-		/* Set up I2C pull levels */
-		tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL);
-		tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE;
-		__raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL);
-	}
-
-	return local_onoff_enable(clk, enable);
-}
-
-static struct clk clk_usbd = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_enable,
-	.enable_reg	= LPC32XX_CLKPWR_USB_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_USBCTRL_HCLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-#define OTG_ALWAYS_MASK		(LPC32XX_USB_OTG_OTG_CLOCK_ON | \
-				 LPC32XX_USB_OTG_I2C_CLOCK_ON)
-
-static int local_usb_otg_enable(struct clk *clk, int enable)
-{
-	int to = 1000;
-
-	if (enable) {
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-		while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
-			clk->enable_mask) != clk->enable_mask) && (to > 0))
-			to--;
-	} else {
-		__raw_writel(OTG_ALWAYS_MASK, clk->enable_reg);
-
-		while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) &
-			OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0))
-			to--;
-	}
-
-	if (to)
-		return 0;
-	else
-		return -1;
-}
-
-static struct clk clk_usb_otg_dev = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_otg_enable,
-	.enable_reg	= LPC32XX_USB_OTG_CLK_CTRL,
-	.enable_mask	= LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
-			  LPC32XX_USB_OTG_OTG_CLOCK_ON |
-			  LPC32XX_USB_OTG_DEV_CLOCK_ON |
-			  LPC32XX_USB_OTG_I2C_CLOCK_ON,
-	.get_rate	= local_return_parent_rate,
-};
-
-static struct clk clk_usb_otg_host = {
-	.parent		= &clk_usbpll,
-	.enable		= local_usb_otg_enable,
-	.enable_reg	= LPC32XX_USB_OTG_CLK_CTRL,
-	.enable_mask	= LPC32XX_USB_OTG_AHB_M_CLOCK_ON |
-			  LPC32XX_USB_OTG_OTG_CLOCK_ON |
-			  LPC32XX_USB_OTG_HOST_CLOCK_ON |
-			  LPC32XX_USB_OTG_I2C_CLOCK_ON,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int tsc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	/* Make sure 32KHz clock is the selected clock */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_tsc = {
-	.parent		= &osc_32KHz,
-	.enable		= tsc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int adc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-	u32 divider;
-
-	/* Use PERIPH_CLOCK */
-	tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-	tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL;
-	/*
-	 * Set clock divider so that we have equal to or less than
-	 * 4.5MHz clock at ADC
-	 */
-	divider = clk->get_rate(clk) / 4500000 + 1;
-	tmp |= divider;
-	__raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1);
-
-	/* synchronize rate of this clock w/ actual HW setting */
-	clk->rate = clk->get_rate(clk->parent) / divider;
-
-	if (enable == 0)
-		__raw_writel(0, clk->enable_reg);
-	else
-		__raw_writel(clk->enable_mask, clk->enable_reg);
-
-	return 0;
-}
-
-static struct clk clk_adc = {
-	.parent		= &clk_pclk,
-	.enable		= adc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_ADC_CLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN,
-	.get_rate	= local_return_parent_rate,
-};
-
-static int mmc_onoff_enable(struct clk *clk, int enable)
-{
-	u32 tmp;
-
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS |
-		  LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS);
-
-	/* If rate is 0, disable clock */
-	if (enable != 0)
-		tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN |
-			LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN;
-
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static unsigned long mmc_get_rate(struct clk *clk)
-{
-	u32 div, rate, oldclk;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-		LPC32XX_CLKPWR_MS_CTRL);
-	div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL);
-	__raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL);
-
-	/* Get the parent clock rate */
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Get the MMC controller clock divider value */
-	div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-
-	if (!div)
-		div = 1;
-
-	return rate / div;
-}
-
-static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long div, prate;
-
-	/* Get the parent clock rate */
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		return prate;
-
-	div = prate / rate;
-	if (div > 0xf)
-		div = 0xf;
-
-	return prate / div;
-}
-
-static int mmc_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 tmp;
-	unsigned long prate, div, crate = mmc_round_rate(clk, rate);
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	div = prate / crate;
-
-	/* The MMC clock must be on when accessing an MMC register */
-	tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) &
-		~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf);
-	tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) |
-		LPC32XX_CLKPWR_MSCARD_SDCARD_EN;
-	__raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL);
-
-	return 0;
-}
-
-static struct clk clk_mmc = {
-	.parent		= &clk_armpll,
-	.set_rate	= mmc_set_rate,
-	.get_rate	= mmc_get_rate,
-	.round_rate	= mmc_round_rate,
-	.enable		= mmc_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_MS_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_MSCARD_SDCARD_EN,
-};
-
-static unsigned long clcd_get_rate(struct clk *clk)
-{
-	u32 tmp, div, rate, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	rate = clk->parent->get_rate(clk->parent);
-
-	/* Only supports internal clocking */
-	if (tmp & TIM2_BCD)
-		return rate;
-
-	div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22);
-	tmp = rate / (2 + div);
-
-	return tmp;
-}
-
-static int clcd_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 tmp, prate, div, oldclk;
-
-	/* The LCD clock must be on when accessing an LCD register */
-	oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL);
-	__raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-		LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD;
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate < prate) {
-		/* Find closest divider */
-		div = prate / rate;
-		if (div >= 2) {
-			div -= 2;
-			tmp &= ~TIM2_BCD;
-		}
-
-		tmp &= ~(0xF800001F);
-		tmp |= (div & 0x1F);
-		tmp |= (((div >> 5) & 0x1F) << 27);
-	}
-
-	__raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2));
-	__raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL);
-
-	return 0;
-}
-
-static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate)
-{
-	u32 prate, div;
-
-	prate = clk->parent->get_rate(clk->parent);
-
-	if (rate >= prate)
-		rate = prate;
-	else {
-		div = prate / rate;
-		if (div > 0x3ff)
-			div = 0x3ff;
-
-		rate = prate / div;
-	}
-
-	return rate;
-}
-
-static struct clk clk_lcd = {
-	.parent		= &clk_hclk,
-	.set_rate	= clcd_set_rate,
-	.get_rate	= clcd_get_rate,
-	.round_rate	= clcd_round_rate,
-	.enable		= local_onoff_enable,
-	.enable_reg	= LPC32XX_CLKPWR_LCDCLK_CTRL,
-	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
-};
-
-static void local_clk_disable(struct clk *clk)
-{
-	/* Don't attempt to disable clock if it has no users */
-	if (clk->usecount > 0) {
-		clk->usecount--;
-
-		/* Only disable clock when it has no more users */
-		if ((clk->usecount == 0) && (clk->enable))
-			clk->enable(clk, 0);
-
-		/* Check parent clocks, they may need to be disabled too */
-		if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-}
-
-static int local_clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	/* Enable parent clocks first and update use counts */
-	if (clk->parent)
-		ret = local_clk_enable(clk->parent);
-
-	if (!ret) {
-		/* Only enable clock if it's currently disabled */
-		if ((clk->usecount == 0) && (clk->enable))
-			ret = clk->enable(clk, 1);
-
-		if (!ret)
-			clk->usecount++;
-		else if (clk->parent)
-			local_clk_disable(clk->parent);
-	}
-
-	return ret;
-}
-
-/*
- * clk_enable - inform the system when the clock source should be running.
- */
-int clk_enable(struct clk *clk)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	ret = local_clk_enable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/*
- * clk_disable - inform the system when the clock source is no longer required
- */
-void clk_disable(struct clk *clk)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&global_clkregs_lock, flags);
-	local_clk_disable(clk);
-	spin_unlock_irqrestore(&global_clkregs_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/*
- * clk_get_rate - obtain the current clock rate (in Hz) for a clock source
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate(clk);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*
- * clk_set_rate - set the clock rate for a clock source
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	/*
-	 * Most system clocks can only be enabled or disabled, with
-	 * the actual rate set as part of the peripheral dividers
-	 * instead of high level clock control
-	 */
-	if (clk->set_rate)
-		ret = clk->set_rate(clk, rate);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * clk_round_rate - adjust a rate to the exact rate a clock can provide
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk->round_rate)
-		rate = clk->round_rate(clk, rate);
-	else
-		rate = clk->get_rate(clk);
-
-	return rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/*
- * clk_set_parent - set the parent clock source for this clock
- */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	/* Clock re-parenting is not supported */
-	return -EINVAL;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/*
- * clk_get_parent - get the parent clock source for this clock
- */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-static struct clk_lookup lookups[] = {
-	CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz),
-	CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397),
-	CLKDEV_INIT(NULL, "osc_main", &osc_main),
-	CLKDEV_INIT(NULL, "sys_ck", &clk_sys),
-	CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll),
-	CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll),
-	CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk),
-	CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk),
-	CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0),
-	CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1),
-	CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2),
-	CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3),
-	CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9),
-	CLKDEV_INIT("pl08xdmac", NULL, &clk_dma),
-	CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt),
-	CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm),
-	CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm),
-	CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3),
-	CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4),
-	CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5),
-	CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6),
-	CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0),
-	CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1),
-	CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2),
-	CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0),
-	CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1),
-	CLKDEV_INIT("40050000.key", NULL, &clk_kscan),
-	CLKDEV_INIT("20020000.flash", NULL, &clk_nand),
-	CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc),
-	CLKDEV_INIT("40048000.adc", NULL, &clk_adc),
-	CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0),
-	CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1),
-	CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc),
-	CLKDEV_INIT("20098000.sd", NULL, &clk_mmc),
-	CLKDEV_INIT("31060000.ethernet", NULL, &clk_net),
-	CLKDEV_INIT("dev:clcd", NULL, &clk_lcd),
-	CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd),
-	CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd),
-	CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev),
-	CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host),
-	CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc),
-};
-
-static int __init clk_init(void)
-{
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/*
-	 * Setup muxed SYSCLK for HCLK PLL base -this selects the
-	 * parent clock used for the ARM PLL and is used to derive
-	 * the many system clock rates in the device.
-	 */
-	if (clk_is_sysclk_mainosc() != 0)
-		clk_sys.parent = &osc_main;
-	else
-		clk_sys.parent = &osc_pll397;
-
-	clk_sys.rate = clk_sys.parent->rate;
-
-	/* Compute the current ARM PLL and USB PLL frequencies */
-	local_update_armpll_rate();
-
-	/* Compute HCLK and PCLK bus rates */
-	clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div();
-	clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div();
-
-	/*
-	 * Enable system clocks - this step is somewhat formal, as the
-	 * clocks are already running, but it does get the clock data
-	 * inline with the actual system state. Never disable these
-	 * clocks as they will only stop if the system is going to sleep.
-	 * In that case, the chip/system power management functions will
-	 * handle clock gating.
-	 */
-	if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk))
-		printk(KERN_ERR "Error enabling system HCLK and PCLK\n");
-
-	/*
-	 * Timers 0 and 1 were enabled and are being used by the high
-	 * resolution tick function prior to this driver being initialized.
-	 * Tag them now as used.
-	 */
-	if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1))
-		printk(KERN_ERR "Error enabling timer tick clocks\n");
-
-	return 0;
-}
-core_initcall(clk_init);
-
diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c
index 716e83eb1db8..5b7a1e78c3a5 100644
--- a/arch/arm/mach-lpc32xx/common.c
+++ b/arch/arm/mach-lpc32xx/common.c
@@ -194,21 +194,6 @@ void __init lpc32xx_map_io(void)
 	iotable_init(lpc32xx_io_desc, ARRAY_SIZE(lpc32xx_io_desc));
 }
 
-void lpc23xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	/* Make sure WDT clocks are enabled */
-	__raw_writel(LPC32XX_CLKPWR_PWMCLK_WDOG_EN,
-		LPC32XX_CLKPWR_TIMER_CLK_CTRL);
-
-	/* Instant assert of RESETOUT_N with pulse length 1mS */
-	__raw_writel(13000, io_p2v(LPC32XX_WDTIM_BASE + 0x18));
-	__raw_writel(0x70, io_p2v(LPC32XX_WDTIM_BASE + 0xC));
-
-	/* Wait for watchdog to reset system */
-	while (1)
-		;
-}
-
 static int __init lpc32xx_check_uid(void)
 {
 	u32 uid[4];
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index 1cd8853b2f9b..2d90801ed1e1 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -30,7 +30,6 @@ extern void lpc32xx_timer_init(void);
 extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
-extern void lpc23xx_restart(enum reboot_mode, const char *);
 
 
 /*
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 77d6b1bab278..b2f9e226febe 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -36,7 +36,6 @@
 #include <linux/clk.h>
 #include <linux/mtd/lpc32xx_slc.h>
 #include <linux/mtd/lpc32xx_mlc.h>
-#include <linux/platform_data/gpio-lpc32xx.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -48,13 +47,6 @@
 #include "common.h"
 
 /*
- * Mapped GPIOLIB GPIOs
- */
-#define LCD_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0)
-#define BKL_POWER_GPIO		LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4)
-#define MMC_PWR_ENABLE_GPIO	LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5)
-
-/*
  * AMBA LCD controller
  */
 static struct clcd_panel conn_lcd_panel = {
@@ -86,8 +78,8 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
 {
 	dma_addr_t dma;
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
-		PANEL_SIZE, &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, PANEL_SIZE, &dma,
+					  GFP_KERNEL);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
@@ -97,59 +89,25 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb)
 	fb->fb.fix.smem_len = PANEL_SIZE;
 	fb->panel = &conn_lcd_panel;
 
-	if (gpio_request(LCD_POWER_GPIO, "LCD power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			LCD_POWER_GPIO);
-	else if (gpio_direction_output(LCD_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			LCD_POWER_GPIO);
-
-	if (gpio_request(BKL_POWER_GPIO, "LCD backlight power"))
-		printk(KERN_ERR "Error requesting gpio %u",
-			BKL_POWER_GPIO);
-	else if (gpio_direction_output(BKL_POWER_GPIO, 1))
-		printk(KERN_ERR "Error setting gpio %u to output",
-			BKL_POWER_GPIO);
-
 	return 0;
 }
 
 static int lpc32xx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-		fb->fb.screen_base, fb->fb.fix.smem_start,
-		fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 static void lpc32xx_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-		fb->fb.screen_base, fb->fb.fix.smem_start);
-}
-
-/*
- * On some early LCD modules (1307.0), the backlight logic is inverted.
- * For those board variants, swap the disable and enable states for
- * BKL_POWER_GPIO.
-*/
-static void clcd_disable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 0);
-	gpio_set_value(LCD_POWER_GPIO, 0);
-}
-
-static void clcd_enable(struct clcd_fb *fb)
-{
-	gpio_set_value(BKL_POWER_GPIO, 1);
-	gpio_set_value(LCD_POWER_GPIO, 1);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
 
 static struct clcd_board lpc32xx_clcd_data = {
 	.name		= "Phytec LCD",
 	.check		= clcdfb_check,
 	.decode		= clcdfb_decode,
-	.disable	= clcd_disable,
-	.enable		= clcd_enable,
 	.setup		= lpc32xx_clcd_setup,
 	.mmap		= lpc32xx_clcd_mmap,
 	.remove		= lpc32xx_clcd_remove,
@@ -188,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = {
 	.mem_buses = PL08X_AHB1,
 };
 
-static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios)
-{
-	/* Only on and off are supported */
-	if (ios->power_mode == MMC_POWER_OFF)
-		gpio_set_value(MMC_PWR_ENABLE_GPIO, 0);
-	else
-		gpio_set_value(MMC_PWR_ENABLE_GPIO, 1);
-	return 0;
-}
-
 static struct mmci_platform_data lpc32xx_mmci_data = {
 	.ocr_mask	= MMC_VDD_30_31 | MMC_VDD_31_32 |
 			  MMC_VDD_32_33 | MMC_VDD_33_34,
-	.ios_handler	= mmc_handle_ios,
 };
 
 static struct lpc32xx_slc_platform_data lpc32xx_slc_data = {
@@ -260,8 +207,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
 	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
-	.init_time	= lpc32xx_timer_init,
 	.init_machine	= lpc3250_machine_init,
 	.dt_compat	= lpc32xx_dt_compat,
-	.restart	= lpc23xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 05621a29fba2..1931229a1eaa 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void)
 	unsigned int puart;
 	int i, j;
 
-	/* UART clocks are off, let clock driver manage them */
-	__raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
-
 	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
 		if (!IS_ERR(clk)) {
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
deleted file mode 100644
index ff3499d1fb1a..000000000000
--- a/arch/arm/mach-lpc32xx/timer.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/timer.c
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2009 - 2010 NXP Semiconductors
- * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven
- *                    Ed Schouten <e.schouten@fontys.nl>
- *                    Laurens Timmermans <l.timmermans@fontys.nl>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/err.h>
-#include <linux/clockchips.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
-#include "common.h"
-
-static int lpc32xx_clkevt_next_event(unsigned long delta,
-    struct clock_event_device *dev)
-{
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-
-	return 0;
-}
-
-static int lpc32xx_shutdown(struct clock_event_device *evt)
-{
-	/*
-	 * Disable the timer. When using oneshot, we must also
-	 * disable the timer to wait for the first call to
-	 * set_next_event().
-	 */
-	__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	return 0;
-}
-
-static struct clock_event_device lpc32xx_clkevt = {
-	.name			= "lpc32xx_clkevt",
-	.features		= CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 300,
-	.set_next_event		= lpc32xx_clkevt_next_event,
-	.set_state_shutdown	= lpc32xx_shutdown,
-	.set_state_oneshot	= lpc32xx_shutdown,
-};
-
-static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &lpc32xx_clkevt;
-
-	/* Clear match */
-	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction lpc32xx_timer_irq = {
-	.name		= "LPC32XX Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= lpc32xx_timer_interrupt,
-};
-
-/*
- * The clock management driver isn't initialized at this point, so the
- * clocks need to be enabled here manually and then tagged as used in
- * the clock driver initialization
- */
-void __init lpc32xx_timer_init(void)
-{
-	u32 clkrate, pllreg;
-
-	/* Enable timer clock */
-	__raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN |
-		LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN,
-		LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1);
-
-	/*
-	 * The clock driver isn't initialized at this point. So determine if
-	 * the SYSCLK is driven from the PLL397 or main oscillator and then use
-	 * it to compute the PLL frequency and the PCLK divider to get the base
-	 * timer rates. This rate is needed to compute the tick rate.
-	 */
-	if (clk_is_sysclk_mainosc() != 0)
-		clkrate = LPC32XX_MAIN_OSC_FREQ;
-	else
-		clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ;
-
-	/* Get ARM HCLKPLL register and convert it into a frequency */
-	pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF;
-	clkrate = clk_get_pllrate_from_reg(clkrate, pllreg);
-
-	/* Get PCLK divider and divide ARM PLL clock by it to get timer rate */
-	clkrate = clkrate / clk_get_pclk_div();
-
-	/* Initial timer setup */
-	__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
-		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-	__raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
-		LPC32XX_TIMER_CNTR_MCR_STOP(0) |
-		LPC32XX_TIMER_CNTR_MCR_RESET(0),
-		LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
-
-	/* Setup tick interrupt */
-	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
-
-	/* Setup the clockevent structure. */
-	lpc32xx_clkevt.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
-
-	/* Use timer1 as clock source. */
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
-		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
-	clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
-		"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
-}
diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index aeece17e5cea..8ced4ad94af0 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_MEDIATEK
-	bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7
+	bool "Mediatek MT65xx & MT81xx SoC"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select PINCTRL
 	select MTK_TIMER
@@ -17,6 +18,10 @@ config MACH_MT6592
 	bool "MediaTek MT6592 SoCs support"
 	default ARCH_MEDIATEK
 
+config MACH_MT7623
+	bool "MediaTek MT7623 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT8127
 	bool "MediaTek MT8127 SoCs support"
 	default ARCH_MEDIATEK
diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
index 43e619f56172..21164605b83f 100644
--- a/arch/arm/mach-mediatek/Makefile
+++ b/arch/arm/mach-mediatek/Makefile
@@ -1 +1,4 @@
+ifeq ($(CONFIG_SMP),y)
+obj-$(CONFIG_ARCH_MEDIATEK) += platsmp.o
+endif
 obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
index a9549005097e..9c2e38d30f47 100644
--- a/arch/arm/mach-mediatek/mediatek.c
+++ b/arch/arm/mach-mediatek/mediatek.c
@@ -16,10 +16,38 @@
  */
 #include <linux/init.h>
 #include <asm/mach/arch.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+
+#define GPT6_CON_MT65xx 0x10008060
+#define GPT_ENABLE      0x31
+
+static void __init mediatek_timer_init(void)
+{
+	void __iomem *gpt_base;
+
+	if (of_machine_is_compatible("mediatek,mt6589") ||
+	    of_machine_is_compatible("mediatek,mt8135") ||
+	    of_machine_is_compatible("mediatek,mt8127")) {
+		/* turn on GPT6 which ungates arch timer clocks */
+		gpt_base = ioremap(GPT6_CON_MT65xx, 0x04);
+
+		/* enable clock and set to free-run */
+		writel(GPT_ENABLE, gpt_base);
+		iounmap(gpt_base);
+	}
+
+	of_clk_init(NULL);
+	clocksource_probe();
+};
 
 static const char * const mediatek_board_dt_compat[] = {
+	"mediatek,mt2701",
 	"mediatek,mt6589",
 	"mediatek,mt6592",
+	"mediatek,mt7623",
 	"mediatek,mt8127",
 	"mediatek,mt8135",
 	NULL,
@@ -27,4 +55,5 @@ static const char * const mediatek_board_dt_compat[] = {
 
 DT_MACHINE_START(MEDIATEK_DT, "Mediatek Cortex-A7 (Device Tree)")
 	.dt_compat	= mediatek_board_dt_compat,
+	.init_time	= mediatek_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c
new file mode 100644
index 000000000000..b821e34474b6
--- /dev/null
+++ b/arch/arm/mach-mediatek/platsmp.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-mediatek/platsmp.c
+ *
+ * Copyright (c) 2014 Mediatek Inc.
+ * Author: Shunli Wang <shunli.wang@mediatek.com>
+ *         Yingjoe Chen <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/io.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/string.h>
+#include <linux/threads.h>
+
+#define MTK_MAX_CPU		8
+#define MTK_SMP_REG_SIZE	0x1000
+
+struct mtk_smp_boot_info {
+	unsigned long smp_base;
+	unsigned int jump_reg;
+	unsigned int core_keys[MTK_MAX_CPU - 1];
+	unsigned int core_regs[MTK_MAX_CPU - 1];
+};
+
+static const struct mtk_smp_boot_info mtk_mt8135_tz_boot = {
+	0x80002000, 0x3fc,
+	{ 0x534c4131, 0x4c415332, 0x41534c33 },
+	{ 0x3f8, 0x3f8, 0x3f8 },
+};
+
+static const struct mtk_smp_boot_info mtk_mt6589_boot = {
+	0x10002000, 0x34,
+	{ 0x534c4131, 0x4c415332, 0x41534c33 },
+	{ 0x38, 0x3c, 0x40 },
+};
+
+static const struct mtk_smp_boot_info mtk_mt7623_boot = {
+	0x10202000, 0x34,
+	{ 0x534c4131, 0x4c415332, 0x41534c33 },
+	{ 0x38, 0x3c, 0x40 },
+};
+
+static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = {
+	{ .compatible   = "mediatek,mt8135", .data = &mtk_mt8135_tz_boot },
+	{ .compatible   = "mediatek,mt8127", .data = &mtk_mt8135_tz_boot },
+	{ .compatible   = "mediatek,mt2701", .data = &mtk_mt8135_tz_boot },
+};
+
+static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
+	{ .compatible   = "mediatek,mt6589", .data = &mtk_mt6589_boot },
+	{ .compatible   = "mediatek,mt7623", .data = &mtk_mt7623_boot },
+};
+
+static void __iomem *mtk_smp_base;
+static const struct mtk_smp_boot_info *mtk_smp_info;
+
+static int mtk_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	if (!mtk_smp_base)
+		return -EINVAL;
+
+	if (!mtk_smp_info->core_keys[cpu-1])
+		return -EINVAL;
+
+	writel_relaxed(mtk_smp_info->core_keys[cpu-1],
+		mtk_smp_base + mtk_smp_info->core_regs[cpu-1]);
+
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	return 0;
+}
+
+static void __init __mtk_smp_prepare_cpus(unsigned int max_cpus, int trustzone)
+{
+	int i, num;
+	const struct of_device_id *infos;
+
+	if (trustzone) {
+		num = ARRAY_SIZE(mtk_tz_smp_boot_infos);
+		infos = mtk_tz_smp_boot_infos;
+	} else {
+		num = ARRAY_SIZE(mtk_smp_boot_infos);
+		infos = mtk_smp_boot_infos;
+	}
+
+	/* Find smp boot info for this SoC */
+	for (i = 0; i < num; i++) {
+		if (of_machine_is_compatible(infos[i].compatible)) {
+			mtk_smp_info = infos[i].data;
+			break;
+		}
+	}
+
+	if (!mtk_smp_info) {
+		pr_err("%s: Device is not supported\n", __func__);
+		return;
+	}
+
+	if (trustzone) {
+		/* smp_base(trustzone-bootinfo) is reserved by device tree */
+		mtk_smp_base = phys_to_virt(mtk_smp_info->smp_base);
+	} else {
+		mtk_smp_base = ioremap(mtk_smp_info->smp_base, MTK_SMP_REG_SIZE);
+		if (!mtk_smp_base) {
+			pr_err("%s: Can't remap %lx\n", __func__,
+				mtk_smp_info->smp_base);
+			return;
+		}
+	}
+
+	/*
+	 * write the address of slave startup address into the system-wide
+	 * jump register
+	 */
+	writel_relaxed(virt_to_phys(secondary_startup_arm),
+			mtk_smp_base + mtk_smp_info->jump_reg);
+}
+
+static void __init mtk_tz_smp_prepare_cpus(unsigned int max_cpus)
+{
+	__mtk_smp_prepare_cpus(max_cpus, 1);
+}
+
+static void __init mtk_smp_prepare_cpus(unsigned int max_cpus)
+{
+	__mtk_smp_prepare_cpus(max_cpus, 0);
+}
+
+static const struct smp_operations mt81xx_tz_smp_ops __initconst = {
+	.smp_prepare_cpus = mtk_tz_smp_prepare_cpus,
+	.smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt81xx_tz_smp, "mediatek,mt81xx-tz-smp", &mt81xx_tz_smp_ops);
+
+static const struct smp_operations mt6589_smp_ops __initconst = {
+	.smp_prepare_cpus = mtk_smp_prepare_cpus,
+	.smp_boot_secondary = mtk_boot_secondary,
+};
+CPU_METHOD_OF_DECLARE(mt6589_smp, "mediatek,mt6589-smp", &mt6589_smp_ops);
diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
index 0743e2059645..31bdd91098b6 100644
--- a/arch/arm/mach-meson/Kconfig
+++ b/arch/arm/mach-meson/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_MESON
-	bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
+	bool "Amlogic Meson SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select ARM_GIC
@@ -19,4 +20,9 @@ config MACH_MESON8
 	default ARCH_MESON
 	select MESON6_TIMER
 
+config MACH_MESON8B
+	bool "Amlogic Meson8b SoCs support"
+	default ARCH_MESON
+	select MESON6_TIMER
+
 endif
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 5d6affe6a694..4e2357178625 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -19,6 +19,7 @@
 static const char * const meson_common_board_compat[] = {
 	"amlogic,meson6",
 	"amlogic,meson8",
+	"amlogic,meson8b",
 	NULL,
 };
 
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index fdbfadf00c84..01c57d369462 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,9 +1,22 @@
+menuconfig ARCH_MMP
+	bool "Marvell PXA168/910/MMP2"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select GPIO_PXA
+	select PINCTRL
+	select PLAT_PXA
+	help
+	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
+
 if ARCH_MMP
 
-menu "Marvell PXA168/910/MMP2 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implementations"
+
+if ATAGS
 
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -11,6 +24,7 @@ config MACH_ASPENITE
 
 config MACH_ZYLONITE2
 	bool "Marvell's PXA168 Zylonite2 Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -18,6 +32,7 @@ config MACH_ZYLONITE2
 
 config MACH_AVENGERS_LITE
 	bool "Marvell's PXA168 Avengers Lite Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -25,6 +40,7 @@ config MACH_AVENGERS_LITE
 
 config MACH_TAVOREVB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -32,6 +48,7 @@ config MACH_TAVOREVB
 
 config MACH_TTC_DKB
 	bool "Marvell's PXA910 TavorEVB Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA910
 	help
 	  Say 'Y' here if you want to support the Marvell PXA910-based
@@ -39,7 +56,7 @@ config MACH_TTC_DKB
 
 config MACH_BROWNSTONE
 	bool "Marvell's Brownstone Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -50,7 +67,7 @@ config MACH_BROWNSTONE
 
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
@@ -61,7 +78,7 @@ config MACH_FLINT
 
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
-	depends on !CPU_MOHAWK
+	depends on ARCH_MULTI_V7
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
@@ -72,6 +89,7 @@ config MACH_MARVELL_JASPER
 
 config MACH_TETON_BGA
 	bool "Marvell's PXA168 Teton BGA Development Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
@@ -79,14 +97,16 @@ config MACH_TETON_BGA
 
 config MACH_GPLUGD
 	bool "Marvell's PXA168 GuruPlug Display (gplugD) Board"
+	depends on ARCH_MULTI_V5
 	select CPU_PXA168
 	help
 	  Say 'Y' here if you want to support the Marvell PXA168-based
 	  GuruPlug Display (gplugD) Board
+endif
 
 config MACH_MMP_DT
 	bool "Support MMP (ARMv5) platforms from device tree"
-	select USE_OF
+	depends on ARCH_MULTI_V5
 	select PINCTRL
 	select PINCTRL_SINGLE
 	select COMMON_CLK
@@ -99,11 +119,9 @@ config MACH_MMP_DT
 
 config MACH_MMP2_DT
 	bool "Support MMP2 (ARMv7) platforms from device tree"
-	depends on !CPU_MOHAWK
-	select USE_OF
+	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_SINGLE
-	select COMMON_CLK
 	select ARCH_HAS_RESET_CONTROLLER
 	select CPU_PJ4
 	help
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 98f0f6388e44..7677ad5414e9 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -1,6 +1,7 @@
 #
 # Makefile for Marvell's PXA168 processors line
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-pxa/include
 
 obj-y				+= common.o devices.o time.o
 
diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot
deleted file mode 100644
index 5edf03e2beed..000000000000
--- a/arch/arm/mach-mmp/Makefile.boot
+++ /dev/null
@@ -1 +0,0 @@
-   zreladdr-y	+= 0x00008000
diff --git a/arch/arm/mach-mmp/include/mach/addr-map.h b/arch/arm/mach-mmp/addr-map.h
index f88a44c0ef91..2739d27bc89d 100644
--- a/arch/arm/mach-mmp/include/mach/addr-map.h
+++ b/arch/arm/mach-mmp/addr-map.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/addr-map.h
- *
  *   Common address map definitions
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 7e0248582efd..5db0edf716dd 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -22,14 +22,14 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 #include "common.h"
 
 static unsigned long common_pin_config[] __initdata = {
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index a451a0f4d512..3d2aea830ef7 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -17,10 +17,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "irqs.h"
 
 
 #include "common.h"
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index ac25544b8cdb..d1613b954926 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/clock-mmp2.c b/arch/arm/mach-mmp/clock-mmp2.c
index 53d77cbd6000..835c3e7cc67e 100644
--- a/arch/arm/mach-mmp/clock-mmp2.c
+++ b/arch/arm/mach-mmp/clock-mmp2.c
@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -105,7 +106,8 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"),
 };
 
-void __init mmp2_clk_init(void)
+void __init mmp2_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			  phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(mmp2_clkregs));
 }
diff --git a/arch/arm/mach-mmp/clock-pxa168.c b/arch/arm/mach-mmp/clock-pxa168.c
index c572f219ae26..f726a3692431 100644
--- a/arch/arm/mach-mmp/clock-pxa168.c
+++ b/arch/arm/mach-mmp/clock-pxa168.c
@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -85,7 +86,8 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa168_clk_init(void)
+void __init pxa168_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa168_clkregs));
 }
diff --git a/arch/arm/mach-mmp/clock-pxa910.c b/arch/arm/mach-mmp/clock-pxa910.c
index 379e1df61c70..bca60a224e07 100644
--- a/arch/arm/mach-mmp/clock-pxa910.c
+++ b/arch/arm/mach-mmp/clock-pxa910.c
@@ -4,8 +4,9 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #include "common.h"
 #include "clock.h"
@@ -61,7 +62,8 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
-void __init pxa910_clk_init(void)
+void __init pxa910_clk_init(phys_addr_t mpmu_phys, phys_addr_t apmu_phys,
+			    phys_addr_t apbc_phys, phys_addr_t apbcp_phys)
 {
 	clkdev_add_table(ARRAY_AND_SIZE(pxa910_clkregs));
 }
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 7c6f95f29142..ac6633d0b69b 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -13,7 +13,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/regs-apbc.h>
+#include "regs-apbc.h"
 #include "clock.h"
 
 static void apbc_clk_enable(struct clk *clk)
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index 149b30cd1469..8194445183fe 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-mmp/clock.h
- *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
diff --git a/arch/arm/mach-mmp/common.c b/arch/arm/mach-mmp/common.c
index c03b4ab582db..685a0993cff6 100644
--- a/arch/arm/mach-mmp/common.c
+++ b/arch/arm/mach-mmp/common.c
@@ -15,8 +15,8 @@
 #include <asm/page.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
+#include "addr-map.h"
+#include "cputype.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index cf445bae6d77..7453a90c34bd 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -5,6 +5,3 @@ extern void timer_init(int irq);
 
 extern void __init mmp_map_io(void);
 extern void mmp_restart(enum reboot_mode, const char *);
-extern void __init pxa168_clk_init(void);
-extern void __init pxa910_clk_init(void);
-extern void __init mmp2_clk_init(void);
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/cputype.h
index 8a3b56dfd35d..8a3b56dfd35d 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/cputype.h
diff --git a/arch/arm/mach-mmp/devices.c b/arch/arm/mach-mmp/devices.c
index 2bcb766af05d..3330ac7cfbef 100644
--- a/arch/arm/mach-mmp/devices.c
+++ b/arch/arm/mach-mmp/devices.c
@@ -12,10 +12,10 @@
 #include <linux/delay.h>
 
 #include <asm/irq.h>
-#include <mach/irqs.h>
-#include <mach/devices.h>
-#include <mach/cputype.h>
-#include <mach/regs-usb.h>
+#include "irqs.h"
+#include "devices.h"
+#include "cputype.h"
+#include "regs-usb.h"
 
 int __init pxa_register_device(struct pxa_device_desc *desc,
 				void *data, size_t size)
@@ -73,6 +73,8 @@ int __init pxa_register_device(struct pxa_device_desc *desc,
 }
 
 #if IS_ENABLED(CONFIG_USB) || IS_ENABLED(CONFIG_USB_GADGET)
+#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
+#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 /*****************************************************************************
  * The registers read/write routines
@@ -112,9 +114,6 @@ static void u2o_write(void __iomem *base, unsigned int offset,
 	readl_relaxed(base + offset);
 }
 
-#if IS_ENABLED(CONFIG_USB_MV_UDC) || IS_ENABLED(CONFIG_USB_EHCI_MV)
-
-#if IS_ENABLED(CONFIG_CPU_PXA910) || IS_ENABLED(CONFIG_CPU_PXA168)
 
 static DEFINE_MUTEX(phy_lock);
 static int phy_init_cnt;
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/devices.h
index 21217ef11b64..21217ef11b64 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/devices.h
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index 6291c33d83e2..078b98034960 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -21,10 +21,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 22762a1f9f72..c224119dc0f4 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -16,9 +16,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/irqs.h>
-#include <mach/pxa168.h>
-#include <mach/mfp-pxa168.h>
+#include "irqs.h"
+#include "pxa168.h"
+#include "mfp-pxa168.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/include/mach/dma.h b/arch/arm/mach-mmp/include/mach/dma.h
deleted file mode 100644
index 1d6914544da4..000000000000
--- a/arch/arm/mach-mmp/include/mach/dma.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/dma.h
- */
-
-#ifndef __ASM_MACH_DMA_H
-#define __ASM_MACH_DMA_H
-
-#include <mach/addr-map.h>
-
-#define DMAC_REGS_VIRT	(APB_VIRT_BASE + 0x00000)
-
-#include <plat/dma.h>
-#endif /* __ASM_MACH_DMA_H */
diff --git a/arch/arm/mach-mmp/include/mach/hardware.h b/arch/arm/mach-mmp/include/mach/hardware.h
deleted file mode 100644
index 99264a5ce5e4..000000000000
--- a/arch/arm/mach-mmp/include/mach/hardware.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASM_MACH_HARDWARE_H
-#define __ASM_MACH_HARDWARE_H
-
-#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-mmp/include/mach/regs-smc.h b/arch/arm/mach-mmp/include/mach/regs-smc.h
deleted file mode 100644
index e484d40d71bd..000000000000
--- a/arch/arm/mach-mmp/include/mach/regs-smc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/regs-smc.h
- *
- *  Static Memory Controller Registers
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_REGS_SMC_H
-#define __ASM_MACH_REGS_SMC_H
-
-#include <mach/addr-map.h>
-
-#define SMC_VIRT_BASE		(AXI_VIRT_BASE + 0x83800)
-#define SMC_REG(x)		(SMC_VIRT_BASE + (x))
-
-#define SMC_MSC0		SMC_REG(0x0020)
-#define SMC_MSC1		SMC_REG(0x0024)
-#define SMC_SXCNFG0		SMC_REG(0x0030)
-#define SMC_SXCNFG1		SMC_REG(0x0034)
-#define SMC_MEMCLKCFG		SMC_REG(0x0068)
-#define SMC_CSDFICFG0		SMC_REG(0x0090)
-#define SMC_CSDFICFG1		SMC_REG(0x0094)
-#define SMC_CLK_RET_DEL		SMC_REG(0x00b0)
-#define SMC_ADV_RET_DEL		SMC_REG(0x00b4)
-#define SMC_CSADRMAP0		SMC_REG(0x00c0)
-#define SMC_CSADRMAP1		SMC_REG(0x00c4)
-#define SMC_WE_AP0		SMC_REG(0x00e0)
-#define SMC_WE_AP1		SMC_REG(0x00e4)
-#define SMC_OE_AP0		SMC_REG(0x00f0)
-#define SMC_OE_AP1		SMC_REG(0x00f4)
-#define SMC_ADV_AP0		SMC_REG(0x0100)
-#define SMC_ADV_AP1		SMC_REG(0x0104)
-
-#endif /* __ASM_MACH_REGS_SMC_H */
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
deleted file mode 100644
index 8890fa8fa771..000000000000
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/arm/mach-mmp/include/mach/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/addr-map.h>
-#include <asm/mach-types.h>
-
-#define UART1_BASE	(APB_PHYS_BASE + 0x36000)
-#define UART2_BASE	(APB_PHYS_BASE + 0x17000)
-#define UART3_BASE	(APB_PHYS_BASE + 0x18000)
-
-volatile unsigned long *UART;
-
-static inline void putc(char c)
-{
-	/* UART enabled? */
-	if (!(UART[UART_IER] & UART_IER_UUE))
-		return;
-
-	while (!(UART[UART_LSR] & UART_LSR_THRE))
-		barrier();
-
-	UART[UART_TX] = c;
-}
-
-/*
- * This does not append a newline
- */
-static inline void flush(void)
-{
-}
-
-static inline void arch_decomp_setup(void)
-{
-	/* default to UART2 */
-	UART = (unsigned long *)UART2_BASE;
-
-	if (machine_is_avengers_lite())
-		UART = (unsigned long *)UART3_BASE;
-}
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/irqs.h
index fb492a50a817..fb492a50a817 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/irqs.h
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 0e9e5c05b37c..5dbb753a77ac 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -20,12 +20,12 @@
 #include <linux/mfd/max8925.h>
 #include <linux/interrupt.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-mmp2.h>
-#include <mach/mmp2.h>
+#include "addr-map.h"
+#include "mfp-mmp2.h"
+#include "mmp2.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/mfp-mmp2.h
index 4ad38629c3f6..b2744349725d 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
+++ b/arch/arm/mach-mmp/mfp-mmp2.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_MFP_MMP2_H
 #define __ASM_MACH_MFP_MMP2_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/mfp-pxa168.h
index 92aaa3c19d61..9050d032377e 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/mfp-pxa168.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_MFP_PXA168_H
 #define __ASM_MACH_MFP_PXA168_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x1 << 13)
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/mfp-pxa910.h
index 8c78f2b16452..f06db5cd3ad3 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/mfp-pxa910.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_MACH_MFP_PXA910_H
 #define __ASM_MACH_MFP_PXA910_H
 
-#include <mach/mfp.h>
+#include "mfp.h"
 
 #define MFP_DRIVE_VERY_SLOW	(0x0 << 13)
 #define MFP_DRIVE_SLOW		(0x2 << 13)
diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/mfp.h
index 62e510e80a58..62e510e80a58 100644
--- a/arch/arm/mach-mmp/include/mach/mfp.h
+++ b/arch/arm/mach-mmp/mfp.h
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index a70b5530bd42..afba5460cdaf 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -9,6 +9,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/clk/mmp.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,15 +21,14 @@
 #include <asm/hardware/cache-tauros2.h>
 
 #include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-#include <mach/mmp2.h>
-#include <mach/pm-mmp2.h>
+#include "addr-map.h"
+#include "regs-apbc.h"
+#include "cputype.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "devices.h"
+#include "mmp2.h"
+#include "pm-mmp2.h"
 
 #include "common.h"
 
@@ -110,8 +110,9 @@ static int __init mmp2_init(void)
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(mmp2_addr_map);
-		pxa_init_dma(IRQ_MMP2_DMA_RIQ, 16);
-		mmp2_clk_init();
+		mmp2_clk_init(APB_PHYS_BASE + 0x50000,
+			      AXI_PHYS_BASE + 0x82800,
+			      APB_PHYS_BASE + 0x15000);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/mmp2.h
index 0764f4ecec82..9b5e75ee9e4d 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/mmp2.h
@@ -10,9 +10,10 @@ extern void mmp2_clear_pmic_int(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/dma-mmp_tdma.h>
 
+#include "devices.h"
+
 extern struct pxa_device_desc mmp2_device_uart1;
 extern struct pxa_device_desc mmp2_device_uart2;
 extern struct pxa_device_desc mmp2_device_uart3;
diff --git a/arch/arm/mach-mmp/pm-mmp2.c b/arch/arm/mach-mmp/pm-mmp2.c
index 43b1a516957f..17699be3bc3d 100644
--- a/arch/arm/mach-mmp/pm-mmp2.c
+++ b/arch/arm/mach-mmp/pm-mmp2.c
@@ -18,12 +18,12 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/pm-mmp2.h>
-#include <mach/regs-icu.h>
-#include <mach/irqs.h>
+
+#include "cputype.h"
+#include "addr-map.h"
+#include "pm-mmp2.h"
+#include "regs-icu.h"
+#include "irqs.h"
 
 int mmp2_set_wake(struct irq_data *d, unsigned int on)
 {
diff --git a/arch/arm/mach-mmp/include/mach/pm-mmp2.h b/arch/arm/mach-mmp/pm-mmp2.h
index 98bd66ce8006..486e0590cd8d 100644
--- a/arch/arm/mach-mmp/include/mach/pm-mmp2.h
+++ b/arch/arm/mach-mmp/pm-mmp2.h
@@ -11,7 +11,7 @@
 #ifndef __MMP2_PM_H__
 #define __MMP2_PM_H__
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define APMU_PJ_IDLE_CFG			APMU_REG(0x018)
 #define APMU_PJ_IDLE_CFG_PJ_IDLE		(1 << 1)
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c
index 7db5870d127f..8b47600b3cdf 100644
--- a/arch/arm/mach-mmp/pm-pxa910.c
+++ b/arch/arm/mach-mmp/pm-pxa910.c
@@ -19,12 +19,12 @@
 #include <linux/irq.h>
 #include <asm/mach-types.h>
 #include <asm/outercache.h>
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/pm-pxa910.h>
-#include <mach/regs-icu.h>
-#include <mach/irqs.h>
+
+#include "cputype.h"
+#include "addr-map.h"
+#include "pm-pxa910.h"
+#include "regs-icu.h"
+#include "irqs.h"
 
 int pxa910_set_wake(struct irq_data *data, unsigned int on)
 {
diff --git a/arch/arm/mach-mmp/include/mach/pm-pxa910.h b/arch/arm/mach-mmp/pm-pxa910.h
index 8cac8ab5253d..8cac8ab5253d 100644
--- a/arch/arm/mach-mmp/include/mach/pm-pxa910.h
+++ b/arch/arm/mach-mmp/pm-pxa910.h
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 144e997624c0..0f5f16fb8c66 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -13,25 +13,25 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/clk/mmp.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/mv_usb.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
-#include <mach/cputype.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/regs-apmu.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/devices.h>
-#include <mach/mfp.h>
-#include <linux/dma-mapping.h>
-#include <mach/pxa168.h>
-#include <mach/regs-usb.h>
 
-#include "common.h"
+#include "addr-map.h"
 #include "clock.h"
+#include "common.h"
+#include "cputype.h"
+#include "devices.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "pxa168.h"
+#include "regs-apbc.h"
+#include "regs-apmu.h"
+#include "regs-usb.h"
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
@@ -55,8 +55,9 @@ static int __init pxa168_init(void)
 	if (cpu_is_pxa168()) {
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa168_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA168_DMA_INT0, 32);
-		pxa168_clk_init();
+		pxa168_clk_init(APB_PHYS_BASE + 0x50000,
+				AXI_PHYS_BASE + 0x82800,
+				APB_PHYS_BASE + 0x15000);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/pxa168.h
index a83ba7cb525d..75841e9ccd73 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/pxa168.h
@@ -11,14 +11,15 @@ extern void pxa168_clear_keypad_wakeup(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/pxa168fb.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/cputype.h>
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
 
+#include "devices.h"
+#include "cputype.h"
+
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
 extern struct pxa_device_desc pxa168_device_uart3;
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index eb57ee196842..1ccbba9ac495 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -7,6 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/clk/mmp.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -18,15 +19,14 @@
 
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/time.h>
-#include <mach/addr-map.h>
-#include <mach/regs-apbc.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mfp.h>
-#include <mach/devices.h>
-#include <mach/pm-pxa910.h>
-#include <mach/pxa910.h>
+#include "addr-map.h"
+#include "regs-apbc.h"
+#include "cputype.h"
+#include "irqs.h"
+#include "mfp.h"
+#include "devices.h"
+#include "pm-pxa910.h"
+#include "pxa910.h"
 
 #include "common.h"
 
@@ -96,8 +96,10 @@ static int __init pxa910_init(void)
 #endif
 		mfp_init_base(MFPR_VIRT_BASE);
 		mfp_init_addr(pxa910_mfp_addr_map);
-		pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
-		pxa910_clk_init();
+		pxa910_clk_init(APB_PHYS_BASE + 0x50000,
+				AXI_PHYS_BASE + 0x82800,
+				APB_PHYS_BASE + 0x15000,
+				APB_PHYS_BASE + 0x3b000);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/pxa910.h
index 92253203f5b4..a211e81e5a08 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/pxa910.h
@@ -7,10 +7,11 @@ extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <mach/devices.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 #include <video/mmp_disp.h>
 
+#include "devices.h"
+
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
 extern struct pxa_device_desc pxa910_device_twsi0;
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/regs-apbc.h
index ddc812f40341..704bcae3fc26 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/regs-apbc.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-apbc.h
- *
  *   Application Peripheral Bus Clock Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_APBC_H
 #define __ASM_MACH_REGS_APBC_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK	(1 << 0)  /* APB Bus Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/regs-apmu.h
index 93c8d0e29bb9..23f6209b65aa 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/regs-apmu.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-apmu.h
- *
  *   Application Subsystem Power Management Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_APMU_H
 #define __ASM_MACH_REGS_APMU_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define APMU_FNCLK_EN	(1 << 4)
 #define APMU_AXICLK_EN	(1 << 3)
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/regs-icu.h
index f882d91894be..0328abe340a4 100644
--- a/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ b/arch/arm/mach-mmp/regs-icu.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-icu.h
- *
  *   Interrupt Control Unit
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_ICU_H
 #define __ASM_MACH_ICU_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))
diff --git a/arch/arm/mach-mmp/include/mach/regs-timers.h b/arch/arm/mach-mmp/regs-timers.h
index 45589fec9fc7..d3611c0becf0 100644
--- a/arch/arm/mach-mmp/include/mach/regs-timers.h
+++ b/arch/arm/mach-mmp/regs-timers.h
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-mmp/include/mach/regs-timers.h
- *
  *   Timers Module
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,7 +9,7 @@
 #ifndef __ASM_MACH_REGS_TIMERS_H
 #define __ASM_MACH_REGS_TIMERS_H
 
-#include <mach/addr-map.h>
+#include "addr-map.h"
 
 #define TIMERS1_VIRT_BASE	(APB_VIRT_BASE + 0x14000)
 #define TIMERS2_VIRT_BASE	(APB_VIRT_BASE + 0x16000)
diff --git a/arch/arm/mach-mmp/include/mach/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
index b047bf487506..b047bf487506 100644
--- a/arch/arm/mach-mmp/include/mach/regs-usb.h
+++ b/arch/arm/mach-mmp/regs-usb.h
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index cdfc9bfee1a4..efe35fadeb60 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -16,10 +16,10 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa910.h"
+#include "pxa910.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index 6aa53fb29d26..cf038eb3bb4b 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -23,11 +23,11 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa168.h>
-#include <mach/pxa168.h>
-#include <mach/teton_bga.h>
-#include <mach/irqs.h>
+#include "addr-map.h"
+#include "mfp-pxa168.h"
+#include "pxa168.h"
+#include "teton_bga.h"
+#include "irqs.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-mmp/include/mach/teton_bga.h b/arch/arm/mach-mmp/teton_bga.h
index 61a539b2cc98..019730f5aa56 100644
--- a/arch/arm/mach-mmp/include/mach/teton_bga.h
+++ b/arch/arm/mach-mmp/teton_bga.h
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-mmp/include/mach/teton_bga.h
- *
  *  Support for the Marvell PXA168 Teton BGA Development Platform.
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index dbc697b2fda1..3c2c92aaa0ae 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -29,14 +29,13 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/sched_clock.h>
-
-#include <mach/addr-map.h>
-#include <mach/regs-timers.h>
-#include <mach/regs-apbc.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
 #include <asm/mach/time.h>
 
+#include "addr-map.h"
+#include "regs-timers.h"
+#include "regs-apbc.h"
+#include "irqs.h"
+#include "cputype.h"
 #include "clock.h"
 
 #ifdef CONFIG_CPU_MMP2
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ac4af81de3ea..d90c74fa614d 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -26,11 +26,11 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <mach/addr-map.h>
-#include <mach/mfp-pxa910.h>
-#include <mach/pxa910.h>
-#include <mach/irqs.h>
-#include <mach/regs-usb.h>
+#include "addr-map.h"
+#include "mfp-pxa910.h"
+#include "pxa910.h"
+#include "irqs.h"
+#include "regs-usb.h"
 
 #include "common.h"
 
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index f49328c39bef..180d9d216719 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_MOXART
-	bool "MOXA ART SoC" if ARCH_MULTI_V4
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select CLKSRC_MMIO
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index f2d309d0619e..c32f85559c65 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -1,6 +1,16 @@
-if ARCH_MV78XX0
+menuconfig ARCH_MV78XX0
+	bool "Marvell MV78xx0"
+	depends on ARCH_MULTI_V5
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
+	select MVEBU_MBUS
+	select PCI
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell MV78xx0 series SoCs:
+	  MV781x0, MV782x0.
 
-menu "Marvell MV78xx0 Implementations"
+if ARCH_MV78XX0
 
 config MACH_DB78X00_BP
 	bool "Marvell DB-78x00-BP Development Board"
@@ -20,6 +30,4 @@ config MACH_TERASTATION_WXL
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo WXL Nas.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index 7cd04634d302..ddb3aa98a3c7 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot
deleted file mode 100644
index 760a0efe7580..000000000000
--- a/arch/arm/mach-mv78xx0/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h
index e20d6da234a6..2f54e1753d45 100644
--- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+++ b/arch/arm/mach-mv78xx0/bridge-regs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
- *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -9,7 +7,7 @@
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
 
-#include <mach/mv78xx0.h>
+#include "mv78xx0.h"
 
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define L2_WRITETHROUGH		0x00020000
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 1f2ef98b37c6..e112f2e7cc9a 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -17,9 +17,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -146,6 +146,7 @@ subsys_initcall(wxl_pci_init);
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index e6ac679bece9..99cc93900a24 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -18,13 +18,13 @@
 #include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/mv78xx0.h>
-#include <mach/bridge-regs.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
+#include "mv78xx0.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 static int get_tclk(void);
@@ -405,9 +405,8 @@ void __init mv78xx0_init(void)
 	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
 	printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
 
-#ifdef CONFIG_CACHE_FEROCEON_L2
-	feroceon_l2_init(is_l2_writethrough());
-#endif
+	if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2))
+		feroceon_l2_init(is_l2_writethrough());
 
 	/* Setup root of clk tree */
 	clk_init();
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 4e0f22b30bc8..cf16e08d4cf5 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -15,9 +15,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
@@ -94,6 +94,7 @@ subsys_initcall(db78x00_pci_init);
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
deleted file mode 100644
index 6b1f088e0597..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no high interrupts set, check error interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_ERR_OFF]
-	mov	\irqnr, #95
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
deleted file mode 100644
index 67cab0a08e07..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
deleted file mode 100644
index 6a761c44a296..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/mv78xx0.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 32073444024b..788569e960e1 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,9 +11,10 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/bridge-regs.h>
+#include <asm/exception.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
+#include "bridge-regs.h"
 #include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
@@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_MV78XX0_GPIO_24_31,
 };
 
+static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
+	if (stat) {
+		unsigned int hwirq = 32 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
+	if (stat) {
+		unsigned int hwirq = 64 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+
 void __init mv78xx0_init_irq(void)
 {
 	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
 
+	set_handle_irq(mv78xx0_legacy_handle_irq);
+
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
 	 * registers for core #1 are at an offset of 0x18 from those of
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/irqs.h
index fa1d422196c2..67e0fe730a13 100644
--- a/arch/arm/mach-mv78xx0/include/mach/irqs.h
+++ b/arch/arm/mach-mv78xx0/irqs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/irqs.h
- *
  * IRQ definitions for Marvell MV78xx0 SoCs
  *
  * This file is licensed under the terms of the GNU General Public
@@ -88,7 +86,7 @@
 #define IRQ_MV78XX0_GPIO_START	96
 #define NR_GPIO_IRQS		32
 
-#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+#define MV78XX0_NR_IRQS		(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
 
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index df50342179e2..72843c02e95a 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <plat/mpp.h>
-#include <mach/hardware.h>
+#include "mv78xx0.h"
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
index 723748d8ba7d..2db1265ec121 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
- *
  * Generic definitions for Marvell MV78xx0 SoC flavors:
  *  MV781x0 and MV782x0.
  *
@@ -12,6 +10,8 @@
 #ifndef __ASM_ARCH_MV78XX0_H
 #define __ASM_ARCH_MV78XX0_H
 
+#include "irqs.h"
+
 /*
  * Marvell MV78xx0 address maps.
  *
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 097ea4cb1136..13a7d72ee0c4 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -15,7 +15,7 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
-#include <mach/mv78xx0.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 #define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d2d06f3957f3..308ab71ec822 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -14,9 +14,9 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
@@ -79,6 +79,7 @@ subsys_initcall(rd78x00_pci_init);
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index e20fc4178b15..348044ea650c 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,8 +1,8 @@
 menuconfig ARCH_MVEBU
-	bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
+	bool "Marvell Engineering Business Unit (MVEBU) SoCs"
+	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
 	select PINCTRL
 	select PLAT_ORION
 	select SOC_BUS
@@ -25,17 +25,22 @@ config MACH_MVEBU_V7
 	select MACH_MVEBU_ANY
 
 config MACH_ARMADA_370
-	bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 370 boards"
+	depends on ARCH_MULTI_V7
 	select ARMADA_370_CLK
+	select ARMADA_370_XP_IRQ
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
+	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 370 SoC with device tree.
 
 config MACH_ARMADA_375
-	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 375 boards"
+	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -45,28 +50,34 @@ config MACH_ARMADA_375
 	select HAVE_SMP
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_375
+	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 375 SoC with device tree.
 
 config MACH_ARMADA_38X
-	bool "Marvell Armada 380/385 boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 380/385 boards"
+	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_38X_CLK
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_38X
+	select MVEBU_CLK_COREDIV
 	help
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Armada 380/385 SoC with device tree.
 
 config MACH_ARMADA_39X
-	bool "Marvell Armada 39x boards" if ARCH_MULTI_V7
+	bool "Marvell Armada 39x boards"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_39X_CLK
 	select CACHE_L2X0
 	select HAVE_ARM_SCU
@@ -79,7 +90,9 @@ config MACH_ARMADA_39X
 	  on the Marvell Armada 39x SoC with device tree.
 
 config MACH_ARMADA_XP
-	bool "Marvell Armada XP boards" if ARCH_MULTI_V7
+	bool "Marvell Armada XP boards"
+	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARMADA_XP_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
@@ -89,7 +102,8 @@ config MACH_ARMADA_XP
 	  on the Marvell Armada XP SoC with device tree.
 
 config MACH_DOVE
-	bool "Marvell Dove boards" if ARCH_MULTI_V7
+	bool "Marvell Dove boards"
+	depends on ARCH_MULTI_V7
 	select CACHE_L2X0
 	select CPU_PJ4
 	select DOVE_CLK
@@ -103,7 +117,8 @@ config MACH_DOVE
 	  Marvell Dove using flattened device tree.
 
 config MACH_KIRKWOOD
-	bool "Marvell Kirkwood boards" if ARCH_MULTI_V5
+	bool "Marvell Kirkwood boards"
+	depends on ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
 	select CPU_FEROCEON
 	select KIRKWOOD_CLK
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
index c55bbf81de0e..09413b678409 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.h
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -17,7 +17,7 @@
 
 #ifdef CONFIG_SMP
 void armada_xp_secondary_startup(void);
-extern struct smp_operations armada_xp_smp_ops;
+extern const struct smp_operations armada_xp_smp_ops;
 #endif
 
 #endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index 9f739f3cad4c..1648edd515a2 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -22,7 +22,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/memblock.h>
 #include <linux/mbus.h>
-#include <linux/signal.h>
 #include <linux/slab.h>
 #include <linux/irqchip.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -105,27 +104,6 @@ static void __init mvebu_memblock_reserve(void)
 static void __init mvebu_memblock_reserve(void) {}
 #endif
 
-/*
- * Early versions of Armada 375 SoC have a bug where the BootROM
- * leaves an external data abort pending. The kernel is hit by this
- * data abort as soon as it enters userspace, because it unmasks the
- * data aborts at this moment. We register a custom abort handler
- * below to ignore the first data abort to work around this
- * problem.
- */
-static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
-					struct pt_regs *regs)
-{
-	static int ignore_first;
-
-	if (!ignore_first && fsr == 0x1406) {
-		ignore_first = 1;
-		return 0;
-	}
-
-	return 1;
-}
-
 static void __init mvebu_init_irq(void)
 {
 	irqchip_init();
@@ -134,17 +112,6 @@ static void __init mvebu_init_irq(void)
 	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
 }
 
-static void __init external_abort_quirk(void)
-{
-	u32 dev, rev;
-
-	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
-		return;
-
-	hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
-			"imprecise external abort");
-}
-
 static void __init i2c_quirk(void)
 {
 	struct device_node *np;
@@ -177,8 +144,6 @@ static void __init mvebu_dt_init(void)
 {
 	if (of_machine_is_compatible("marvell,armadaxp"))
 		i2c_quirk();
-	if (of_machine_is_compatible("marvell,a375-db"))
-		external_abort_quirk();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
index 44eedf331ae7..7e989d61159c 100644
--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -40,6 +40,7 @@
 unsigned long coherency_phys_base;
 void __iomem *coherency_base;
 static void __iomem *coherency_cpu_base;
+static void __iomem *cpu_config_base;
 
 /* Coherency fabric registers */
 #define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
@@ -65,6 +66,31 @@ static const struct of_device_id of_coherency_table[] = {
 int ll_enable_coherency(void);
 void ll_add_cpu_to_smp_group(void);
 
+#define CPU_CONFIG_SHARED_L2 BIT(16)
+
+/*
+ * Disable the "Shared L2 Present" bit in CPU Configuration register
+ * on Armada XP.
+ *
+ * The "Shared L2 Present" bit affects the "level of coherence" value
+ * in the clidr CP15 register.  Cache operation functions such as
+ * "flush all" and "invalidate all" operate on all the cache levels
+ * that included in the defined level of coherence. When HW I/O
+ * coherency is used, this bit causes unnecessary flushes of the L2
+ * cache.
+ */
+static void armada_xp_clear_shared_l2(void)
+{
+	u32 reg;
+
+	if (!cpu_config_base)
+		return;
+
+	reg = readl(cpu_config_base);
+	reg &= ~CPU_CONFIG_SHARED_L2;
+	writel(reg, cpu_config_base);
+}
+
 static int mvebu_hwcc_notifier(struct notifier_block *nb,
 			       unsigned long event, void *__dev)
 {
@@ -81,13 +107,28 @@ static struct notifier_block mvebu_hwcc_nb = {
 	.notifier_call = mvebu_hwcc_notifier,
 };
 
-static struct notifier_block mvebu_hwcc_pci_nb = {
+static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = {
 	.notifier_call = mvebu_hwcc_notifier,
 };
 
+static int armada_xp_clear_shared_l2_notifier_func(struct notifier_block *nfb,
+					unsigned long action, void *hcpu)
+{
+	if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+		armada_xp_clear_shared_l2();
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block armada_xp_clear_shared_l2_notifier = {
+	.notifier_call = armada_xp_clear_shared_l2_notifier_func,
+	.priority = 100,
+};
+
 static void __init armada_370_coherency_init(struct device_node *np)
 {
 	struct resource res;
+	struct device_node *cpu_config_np;
 
 	of_address_to_resource(np, 0, &res);
 	coherency_phys_base = res.start;
@@ -100,6 +141,23 @@ static void __init armada_370_coherency_init(struct device_node *np)
 	sync_cache_w(&coherency_phys_base);
 	coherency_base = of_iomap(np, 0);
 	coherency_cpu_base = of_iomap(np, 1);
+
+	cpu_config_np = of_find_compatible_node(NULL, NULL,
+						"marvell,armada-xp-cpu-config");
+	if (!cpu_config_np)
+		goto exit;
+
+	cpu_config_base = of_iomap(cpu_config_np, 0);
+	if (!cpu_config_base) {
+		of_node_put(cpu_config_np);
+		goto exit;
+	}
+
+	of_node_put(cpu_config_np);
+
+	register_cpu_notifier(&armada_xp_clear_shared_l2_notifier);
+
+exit:
 	set_cpu_coherent();
 }
 
@@ -204,6 +262,8 @@ int set_cpu_coherent(void)
 			pr_warn("Coherency fabric is not initialized\n");
 			return 1;
 		}
+
+		armada_xp_clear_shared_l2();
 		ll_add_cpu_to_smp_group();
 		return ll_enable_coherency();
 	}
diff --git a/arch/arm/mach-mvebu/include/mach/gpio.h b/arch/arm/mach-mvebu/include/mach/gpio.h
deleted file mode 100644
index 40a8c178f10d..000000000000
--- a/arch/arm/mach-mvebu/include/mach/gpio.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
index 3d5000481c11..d715dec1c197 100644
--- a/arch/arm/mach-mvebu/platsmp-a9.c
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -93,11 +93,11 @@ static int armada_38x_cpu_kill(unsigned int cpu)
 }
 #endif
 
-static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
+static const struct smp_operations mvebu_cortex_a9_smp_ops __initconst = {
 	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
 };
 
-static struct smp_operations armada_38x_smp_ops __initdata = {
+static const struct smp_operations armada_38x_smp_ops __initconst = {
 	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
 	.smp_secondary_init     = armada_38x_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
index 58cc8c1575eb..46c742d3bd41 100644
--- a/arch/arm/mach-mvebu/platsmp.c
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -140,6 +140,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 		panic("Cannot find 'marvell,bootrom' compatible node");
 
 	err = of_address_to_resource(node, 0, &res);
+	of_node_put(node);
 	if (err < 0)
 		panic("Cannot get 'bootrom' node address");
 
@@ -170,7 +171,7 @@ static int armada_xp_cpu_kill(unsigned int cpu)
 }
 #endif
 
-struct smp_operations armada_xp_smp_ops __initdata = {
+const struct smp_operations armada_xp_smp_ops __initconst = {
 	.smp_init_cpus		= armada_xp_smp_init_cpus,
 	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
 	.smp_boot_secondary	= armada_xp_boot_secondary,
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index e8fdb9ceedf0..ed8fda4cd055 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -296,11 +296,11 @@ int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
 	/* Test the CR_C bit and set it if it was cleared */
 	asm volatile(
 	"mrc	p15, 0, r0, c1, c0, 0 \n\t"
-	"tst	r0, #(1 << 2) \n\t"
+	"tst	r0, %0 \n\t"
 	"orreq	r0, r0, #(1 << 2) \n\t"
 	"mcreq	p15, 0, r0, c1, c0, 0 \n\t"
 	"isb	"
-	: : : "r0");
+	: : "Ir" (CR_C) : "r0");
 
 	pr_debug("Failed to suspend the system\n");
 
@@ -379,6 +379,16 @@ static struct notifier_block mvebu_v7_cpu_pm_notifier = {
 
 static struct platform_device mvebu_v7_cpuidle_device;
 
+static int broken_idle(struct device_node *np)
+{
+	if (of_property_read_bool(np, "broken-idle")) {
+		pr_warn("CPU idle is currently broken: disabling\n");
+		return 1;
+	}
+
+	return 0;
+}
+
 static __init int armada_370_cpuidle_init(void)
 {
 	struct device_node *np;
@@ -387,7 +397,9 @@ static __init int armada_370_cpuidle_init(void)
 	np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
 	if (!np)
 		return -ENODEV;
-	of_node_put(np);
+
+	if (broken_idle(np))
+		goto end;
 
 	/*
 	 * On Armada 370, there is "a slow exit process from the deep
@@ -406,6 +418,8 @@ static __init int armada_370_cpuidle_init(void)
 	mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
 	mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
 
+end:
+	of_node_put(np);
 	return 0;
 }
 
@@ -422,6 +436,10 @@ static __init int armada_38x_cpuidle_init(void)
 				     "marvell,armada-380-coherency-fabric");
 	if (!np)
 		return -ENODEV;
+
+	if (broken_idle(np))
+		goto end;
+
 	of_node_put(np);
 
 	np = of_find_compatible_node(NULL, NULL,
@@ -430,7 +448,6 @@ static __init int armada_38x_cpuidle_init(void)
 		return -ENODEV;
 	mpsoc_base = of_iomap(np, 0);
 	BUG_ON(!mpsoc_base);
-	of_node_put(np);
 
 	/* Set up reset mask when powering down the cpus */
 	reg = readl(mpsoc_base + MPCORE_RESET_CTL);
@@ -450,6 +467,8 @@ static __init int armada_38x_cpuidle_init(void)
 	mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
 	mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
 
+end:
+	of_node_put(np);
 	return 0;
 }
 
@@ -460,12 +479,16 @@ static __init int armada_xp_cpuidle_init(void)
 	np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
 	if (!np)
 		return -ENODEV;
-	of_node_put(np);
+
+	if (broken_idle(np))
+		goto end;
 
 	mvebu_cpu_resume = armada_370_xp_cpu_resume;
 	mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
 	mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
 
+end:
+	of_node_put(np);
 	return 0;
 }
 
diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig
index 3d90ef19be2b..2da8e5dfcf24 100644
--- a/arch/arm/mach-netx/Kconfig
+++ b/arch/arm/mach-netx/Kconfig
@@ -3,20 +3,17 @@ menu "NetX Implementations"
 
 config MACH_NXDKN
 	bool "Enable Hilscher nxdkn Eval Board support"
-	depends on ARCH_NETX
 	help
 	  Board support for the Hilscher NetX Eval Board
 
 config MACH_NXDB500
 	bool "Enable Hilscher nxdb500 Eval Board support"
-	depends on ARCH_NETX
 	select ARM_AMBA
 	help
 	  Board support for the Hilscher nxdb500 Eval Board
 
 config MACH_NXEB500HMI
 	bool "Enable Hilscher nxeb500hmi Eval Board support"
-	depends on ARCH_NETX
 	select ARM_AMBA
 	help
 	  Board support for the Hilscher nxeb500hmi Eval Board
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index d122ee6ab991..8814ee5e98fd 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -42,8 +42,8 @@ int netx_clcd_setup(struct clcd_fb *fb)
 
 	fb->panel = netx_panel;
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, 1024*1024,
-						    &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma,
+					  GFP_KERNEL);
 	if (!fb->fb.screen_base) {
 		printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 		return -ENOMEM;
@@ -57,16 +57,14 @@ int netx_clcd_setup(struct clcd_fb *fb)
 
 int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-				     fb->fb.screen_base,
-				     fb->fb.fix.smem_start,
-				     fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 void netx_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-			      fb->fb.screen_base, fb->fb.fix.smem_start);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
 
 static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
index 5cb1051b5831..033875dbc32b 100644
--- a/arch/arm/mach-netx/include/mach/uncompress.h
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -40,7 +40,7 @@
 #define FR_BUSY (1<<3)
 #define FR_TXFF (1<<5)
 
-static void putc(char c)
+static inline void putc(char c)
 {
 	unsigned long base;
 
diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot
deleted file mode 100644
index e69de29bb2d1..000000000000
--- a/arch/arm/mach-nspire/Makefile.boot
+++ /dev/null
diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c
index abea12617b17..ea0e5b2ca1cd 100644
--- a/arch/arm/mach-nspire/clcd.c
+++ b/arch/arm/mach-nspire/clcd.c
@@ -90,8 +90,8 @@ int nspire_clcd_setup(struct clcd_fb *fb)
 	panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8;
 	panel_size = ALIGN(panel_size, PAGE_SIZE);
 
-	fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev,
-		panel_size, &dma, GFP_KERNEL);
+	fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma,
+					  GFP_KERNEL);
 
 	if (!fb->fb.screen_base) {
 		pr_err("CLCD: unable to map framebuffer\n");
@@ -107,13 +107,12 @@ int nspire_clcd_setup(struct clcd_fb *fb)
 
 int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 {
-	return dma_mmap_writecombine(&fb->dev->dev, vma,
-		fb->fb.screen_base, fb->fb.fix.smem_start,
-		fb->fb.fix.smem_len);
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
 }
 
 void nspire_clcd_remove(struct clcd_fb *fb)
 {
-	dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
-		fb->fb.screen_base, fb->fb.fix.smem_start);
+	dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base,
+		    fb->fb.fix.smem_start);
 }
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cdd05f2e67ee..afb809509140 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -90,13 +90,6 @@ config MACH_OMAP_FSAMPLE
 	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
 	  a board.
 
-config MACH_VOICEBLUE
-	bool "Voiceblue"
-	depends on ARCH_OMAP1 && ARCH_OMAP15XX
-	help
-	  Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
-	  such a board.
-
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 3889b6cd211e..0e8ea95ea822 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
 					   board-nand.o
-obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o
 obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index a95499ea8706..6613a6ff5dbc 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -41,7 +41,7 @@
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>
-#include <mach/camera.h>
+#include "camera.h"
 #include <mach/usb.h>
 
 #include "iomap.h"
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 0fb51d22c8b5..fad95b74bb65 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -29,7 +29,7 @@
 
 #include <mach/tc.h>
 #include <mach/mux.h>
-#include <mach/flash.h>
+#include "flash.h"
 #include <linux/platform_data/keypad-omap.h>
 
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 8340d684d8b6..cd146ed0538d 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -42,7 +42,7 @@
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 086ff34e072b..f7c8c63dd532 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -44,7 +44,7 @@
 #include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <linux/omap-dma.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index ed4e045c2ad8..ae90bd02b3bf 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -32,7 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/mux.h>
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 
diff --git a/arch/arm/mach-omap1/board-nand.c b/arch/arm/mach-omap1/board-nand.c
index 4d0835327d20..7684f9203474 100644
--- a/arch/arm/mach-omap1/board-nand.c
+++ b/arch/arm/mach-omap1/board-nand.c
@@ -22,7 +22,7 @@
 
 void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long mask;
 
 	if (cmd == NAND_CMD_NONE)
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 0efd165b8227..209aecb0df68 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -46,7 +46,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <mach/tc.h>
 
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 1142ae431fe0..e5288cda1a6a 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,7 +34,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <linux/omap-dma.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 54a547a96950..d672495f7441 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -34,7 +34,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 87ec04ae40dd..aaf741b0aff6 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -36,7 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 3d76f05407f0..150b57ba42bf 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -30,7 +30,7 @@
 
 #include <mach/tc.h>
 #include <mach/mux.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 4fcf19c78a08..a9373570bbb1 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -16,7 +16,7 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <mach/board-sx1.h>
+#include "board-sx1.h"
 
 #include "mmc.h"
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 939991ea33d5..6c482254b37c 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -34,11 +34,11 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/flash.h>
+#include "flash.h"
 #include <mach/mux.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
-#include <mach/board-sx1.h>
+#include "board-sx1.h"
 
 #include <mach/hardware.h>
 #include <mach/usb.h>
diff --git a/arch/arm/mach-omap1/include/mach/board-sx1.h b/arch/arm/mach-omap1/board-sx1.h
index 355adbdaae33..355adbdaae33 100644
--- a/arch/arm/mach-omap1/include/mach/board-sx1.h
+++ b/arch/arm/mach-omap1/board-sx1.h
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
deleted file mode 100644
index e960687d0cb1..000000000000
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/board-voiceblue.c
- *
- * Modified from board-generic.c
- *
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/physmap.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/smc91x.h>
-#include <linux/export.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-voiceblue.h>
-#include <mach/flash.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-static struct plat_serial8250_port voiceblue_ports[] = {
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{
-		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
-		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-		.iotype		= UPIO_MEM,
-		.regshift	= 1,
-		.uartclk	= 3686400,
-	},
-	{ },
-};
-
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM1,
-};
-
-static int __init ext_uart_init(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	voiceblue_ports[0].irq = gpio_to_irq(12);
-	voiceblue_ports[1].irq = gpio_to_irq(13);
-	voiceblue_ports[2].irq = gpio_to_irq(14);
-	voiceblue_ports[3].irq = gpio_to_irq(15);
-	serial_device.dev.platform_data = voiceblue_ports;
-	return platform_device_register(&serial_device);
-}
-arch_initcall(ext_uart_init);
-
-static struct physmap_flash_data voiceblue_flash_data = {
-	.width		= 2,
-	.set_vpp	= omap1_set_vpp,
-};
-
-static struct resource voiceblue_flash_resource = {
-	.start	= OMAP_CS0_PHYS,
-	.end	= OMAP_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct platform_device voiceblue_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &voiceblue_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &voiceblue_flash_resource,
-};
-
-static struct smc91x_platdata voiceblue_smc91x_info = {
-	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda	= RPC_LED_100_10,
-	.ledb	= RPC_LED_TX_RX,
-};
-
-static struct resource voiceblue_smc91x_resources[] = {
-	[0] = {
-		.start	= OMAP_CS2_PHYS + 0x300,
-		.end	= OMAP_CS2_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device voiceblue_smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.dev	= {
-		.platform_data	= &voiceblue_smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
-	.resource	= voiceblue_smc91x_resources,
-};
-
-static struct platform_device *voiceblue_devices[] __initdata = {
-	&voiceblue_flash_device,
-	&voiceblue_smc91x_device,
-};
-
-static struct omap_usb_config voiceblue_usb_config __initdata = {
-	.hmc_mode	= 3,
-	.register_host	= 1,
-	.register_dev   = 1,
-	.pins[0]	= 2,
-	.pins[1]	= 6,
-	.pins[2]	= 6,
-};
-
-#define MACHINE_PANICED		1
-#define MACHINE_REBOOTING	2
-#define MACHINE_REBOOT		4
-static unsigned long machine_state;
-
-static int panic_event(struct notifier_block *this, unsigned long event,
-	 void *ptr)
-{
-	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
-		return NOTIFY_DONE;
-
-	/* Flash power LED */
-	omap_writeb(0x78, OMAP_LPG1_LCR);
-	omap_writeb(0x01, OMAP_LPG1_PMR);	/* Enable clock */
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
-	.notifier_call	= panic_event,
-};
-
-static int __init voiceblue_setup(void)
-{
-	if (!machine_is_voiceblue())
-		return -ENODEV;
-
-	/* Setup panic notifier */
-	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
-	return 0;
-}
-postcore_initcall(voiceblue_setup);
-
-static int wdt_gpio_state;
-
-void voiceblue_wdt_enable(void)
-{
-	gpio_direction_output(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	wdt_gpio_state = 0;
-}
-
-void voiceblue_wdt_disable(void)
-{
-	gpio_set_value(0, 0);
-	gpio_set_value(0, 1);
-	gpio_set_value(0, 0);
-	gpio_direction_input(0);
-}
-
-void voiceblue_wdt_ping(void)
-{
-	if (test_bit(MACHINE_REBOOT, &machine_state))
-		return;
-
-	wdt_gpio_state = !wdt_gpio_state;
-	gpio_set_value(0, wdt_gpio_state);
-}
-
-static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
-	 * "Global Software Reset Affects Traffic Controller Frequency".
-	 */
-	if (cpu_is_omap5912()) {
-		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
-		omap_writew(0x8, ARM_RSTCT1);
-	}
-
-	set_bit(MACHINE_REBOOT, &machine_state);
-	voiceblue_wdt_enable();
-	while (1) ;
-}
-
-EXPORT_SYMBOL(voiceblue_wdt_enable);
-EXPORT_SYMBOL(voiceblue_wdt_disable);
-EXPORT_SYMBOL(voiceblue_wdt_ping);
-
-static void __init voiceblue_init(void)
-{
-	/* mux pins for uarts */
-	omap_cfg_reg(UART1_TX);
-	omap_cfg_reg(UART1_RTS);
-	omap_cfg_reg(UART2_TX);
-	omap_cfg_reg(UART2_RTS);
-	omap_cfg_reg(UART3_TX);
-	omap_cfg_reg(UART3_RX);
-
-	/* Watchdog */
-	gpio_request(0, "Watchdog");
-	/* smc91x reset */
-	gpio_request(7, "SMC91x reset");
-	gpio_direction_output(7, 1);
-	udelay(2);	/* wait at least 100ns */
-	gpio_set_value(7, 0);
-	mdelay(50);	/* 50ms until PHY ready */
-	/* smc91x interrupt pin */
-	gpio_request(8, "SMC91x irq");
-	/* 16C554 reset*/
-	gpio_request(6, "16C554 reset");
-	gpio_direction_output(6, 0);
-	/* 16C554 interrupt pins */
-	gpio_request(12, "16C554 irq");
-	gpio_request(13, "16C554 irq");
-	gpio_request(14, "16C554 irq");
-	gpio_request(15, "16C554 irq");
-	irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
-	irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
-	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
-	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
-	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
-	omap_serial_init();
-	omap1_usb_init(&voiceblue_usb_config);
-	omap_register_i2c_bus(1, 100, NULL, 0);
-
-	/* There is a good chance board is going up, so enable power LED
-	 * (it is connected through invertor) */
-	omap_writeb(0x00, OMAP_LPG1_LCR);
-	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
-}
-
-MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
-	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
-	.init_early     = omap1_init_early,
-	.init_irq	= omap1_init_irq,
-	.handle_irq	= omap1_handle_irq,
-	.init_machine	= voiceblue_init,
-	.init_late	= omap1_init_late,
-	.init_time	= omap1_timer_init,
-	.restart	= voiceblue_restart,
-MACHINE_END
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/camera.h
index 847d00f0bb0a..caa6c0d6f0ac 100644
--- a/arch/arm/mach-omap1/include/mach/camera.h
+++ b/arch/arm/mach-omap1/camera.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_CAMERA_H_
 #define __ASM_ARCH_CAMERA_H_
 
-#include <media/omap1_camera.h>
+#include <linux/platform_data/media/omap1_camera.h>
 
 void omap1_camera_init(void *);
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 325e6030095e..8c8be861fff2 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -25,7 +25,7 @@
 #include <mach/mux.h>
 
 #include <mach/omap7xx.h>
-#include <mach/camera.h>
+#include "camera.h"
 #include <mach/hardware.h>
 
 #include "common.h"
@@ -33,24 +33,6 @@
 #include "mmc.h"
 #include "sram.h"
 
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
-};
-
-static void omap_init_audio(void)
-{
-	platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
 
 #define	OMAP_RTC_BASE		0xfffb4800
@@ -425,7 +407,6 @@ static int __init omap1_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 
-	omap_init_audio();
 	omap_init_mbox();
 	omap_init_rtc();
 	omap_init_spi100k();
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 7b02ed218a42..f6ba589cd312 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -25,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/omap-dma.h>
 #include <mach/tc.h>
 
@@ -265,6 +266,42 @@ static const struct platform_device_info omap_dma_dev_info = {
 	.num_res = 1,
 };
 
+/* OMAP730, OMAP850 */
+static const struct dma_slave_map omap7xx_sdma_map[] = {
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(10) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(11) },
+	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
+	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
+	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
+	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
+	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
+	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
+	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
+};
+
+/* OMAP1510, OMAP1610*/
+static const struct dma_slave_map omap1xxx_sdma_map[] = {
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(8) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(9) },
+	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(10) },
+	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(11) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(16) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(17) },
+	{ "mmci-omap.0", "tx", SDMA_FILTER_PARAM(21) },
+	{ "mmci-omap.0", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap_udc", "rx0", SDMA_FILTER_PARAM(26) },
+	{ "omap_udc", "rx1", SDMA_FILTER_PARAM(27) },
+	{ "omap_udc", "rx2", SDMA_FILTER_PARAM(28) },
+	{ "omap_udc", "tx0", SDMA_FILTER_PARAM(29) },
+	{ "omap_udc", "tx1", SDMA_FILTER_PARAM(30) },
+	{ "omap_udc", "tx2", SDMA_FILTER_PARAM(31) },
+	{ "mmci-omap.1", "tx", SDMA_FILTER_PARAM(54) },
+	{ "mmci-omap.1", "rx", SDMA_FILTER_PARAM(55) },
+};
+
 static struct omap_system_dma_plat_info dma_plat_info __initdata = {
 	.reg_map	= reg_map,
 	.channel_stride	= 0x40,
@@ -342,6 +379,14 @@ static int __init omap1_system_dma_init(void)
 	p.dma_attr = d;
 	p.errata = configure_dma_errata();
 
+	if (cpu_is_omap7xx()) {
+		p.slave_map = omap7xx_sdma_map;
+		p.slavecnt = ARRAY_SIZE(omap7xx_sdma_map);
+	} else {
+		p.slave_map = omap1xxx_sdma_map;
+		p.slavecnt = ARRAY_SIZE(omap1xxx_sdma_map);
+	}
+
 	ret = platform_device_add_data(pdev, &p, sizeof(p));
 	if (ret) {
 		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index b3fb531af94e..99cda402e1e2 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -11,7 +11,7 @@
 #include <linux/mtd/map.h>
 
 #include <mach/tc.h>
-#include <mach/flash.h>
+#include "flash.h"
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-omap1/include/mach/flash.h b/arch/arm/mach-omap1/flash.h
index 0d88499b79e9..0d88499b79e9 100644
--- a/arch/arm/mach-omap1/include/mach/flash.h
+++ b/arch/arm/mach-omap1/flash.h
diff --git a/arch/arm/mach-omap1/include/mach/board-voiceblue.h b/arch/arm/mach-omap1/include/mach/board-voiceblue.h
deleted file mode 100644
index 27916b210f57..000000000000
--- a/arch/arm/mach-omap1/include/mach/board-voiceblue.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /*  __ASM_ARCH_VOICEBLUE_H */
-
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index 4869633de8cd..9cca6a56788f 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -45,7 +45,7 @@ static void set_omap_uart_info(unsigned char port)
 	*uart_info = port;
 }
 
-static void putc(int c)
+static inline void putc(int c)
 {
 	if (!uart_base)
 		return;
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 33d1460a5639..0517f0c1581a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -65,6 +65,8 @@ config SOC_AM43XX
 	select MACH_OMAP_GENERIC
 	select MIGHT_HAVE_CACHE_L2X0
 	select HAVE_ARM_SCU
+	select GENERIC_CLOCKEVENTS_BROADCAST
+	select HAVE_ARM_TWD
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
@@ -96,8 +98,8 @@ config ARCH_OMAP2PLUS
 	select OMAP_GPMC
 	select PINCTRL
 	select SOC_BUS
-	select TI_PRIV_EDMA
 	select OMAP_IRQCHIP
+	select CLKSRC_TI_32K
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 
@@ -121,6 +123,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select NEON if CPU_V7
 	select PM
 	select REGULATOR
+	select REGULATOR_FIXED_VOLTAGE
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
 	select VFP
@@ -201,7 +204,6 @@ config MACH_OMAP3_PANDORA
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_NOKIA_N810
        bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 935869698cbc..0ba6a0e6fa19 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -48,11 +48,9 @@ AFLAGS_sleep44xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 # Functions loaded to SRAM
 obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
-obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
 AFLAGS_sram242x.o			:=-Wa,-march=armv6
 AFLAGS_sram243x.o			:=-Wa,-march=armv6
-AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 
 # Restart code (OMAP4/5 currently in omap4-common.c)
 obj-$(CONFIG_SOC_OMAP2420)		+= omap2-restart.o
@@ -186,7 +184,6 @@ obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpllcore.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_virt_prcm_set.o
 obj-$(CONFIG_ARCH_OMAP2)		+= clkt2xxx_dpll.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3)		+= clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_SOC_AM33XX)		+= $(clock-common)
 obj-$(CONFIG_SOC_OMAP5)			+= $(clock-common)
@@ -226,8 +223,6 @@ obj-$(CONFIG_SOC_DRA7XX)		+= omap_hwmod_7xx_data.o
 # EMU peripherals
 obj-$(CONFIG_HW_PERF_EVENTS)		+= pmu.o
 
-obj-$(CONFIG_OMAP_IOMMU)		+= omap-iommu.o
-
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
deleted file mode 100644
index b03e562acc60..000000000000
--- a/arch/arm/mach-omap2/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-  zreladdr-y		+= 0x80008000
-params_phys-y		:= 0x80000100
-initrd_phys-y		:= 0x80800000
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index fb219a30c10c..bab814d2f37d 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,7 +16,9 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 
+#include <asm/setup.h>
 #include <asm/mach/arch.h>
+#include <asm/system_info.h>
 
 #include "common.h"
 
@@ -46,7 +48,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
 	.map_io		= omap242x_map_io,
 	.init_early	= omap2420_init_early,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap2_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap242x_boards_compat,
 	.restart	= omap2xxx_restart,
 MACHINE_END
@@ -63,7 +65,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
 	.map_io		= omap243x_map_io,
 	.init_early	= omap2430_init_early,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap2_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap243x_boards_compat,
 	.restart	= omap2xxx_restart,
 MACHINE_END
@@ -76,13 +78,41 @@ static const char *const n900_boards_compat[] __initconst = {
 	NULL,
 };
 
+/* Set system_rev from atags */
+static void __init rx51_set_system_rev(const struct tag *tags)
+{
+	const struct tag *tag;
+
+	if (tags->hdr.tag != ATAG_CORE)
+		return;
+
+	for_each_tag(tag, tags) {
+		if (tag->hdr.tag == ATAG_REVISION) {
+			system_rev = tag->u.revision.rev;
+			break;
+		}
+	}
+}
+
+/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
+ * save them while the data is still not overwritten
+ */
+static void __init rx51_reserve(void)
+{
+	const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100);
+
+	save_atags(tags);
+	rx51_set_system_rev(tags);
+	omap_reserve();
+}
+
 DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
-	.reserve	= omap_reserve,
+	.reserve	= rx51_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3430_init_early,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap3_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= n900_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
@@ -100,7 +130,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
 	.init_early	= omap3430_init_early,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap3_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap3_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
@@ -117,7 +147,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
 	.init_early	= omap3630_init_early,
 	.init_machine	= omap_generic_init,
 	.init_late	= omap3_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.dt_compat	= omap36xx_boards_compat,
 	.restart	= omap3xxx_restart,
 MACHINE_END
@@ -276,7 +306,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap3_gptimer_timer_init,
+	.init_time	= omap4_local_timer_init,
 	.dt_compat	= am43_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c2975af4cd5d..d9c3ffc39329 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -424,6 +424,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.init_irq	= omap3_init_irq,
 	.init_machine	= omap_ldp_init,
 	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 14edcd7a2a1d..da174c0d603b 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -39,7 +39,7 @@
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
-#include <media/si4713.h>
+#include <linux/platform_data/media/si4713.h>
 #include <linux/platform_data/leds-lp55xx.h>
 
 #include <linux/platform_data/tsl2563.h>
@@ -48,7 +48,7 @@
 #include <video/omap-panel-data.h>
 
 #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
-#include <media/ir-rx51.h>
+#include <linux/platform_data/media/ir-rx51.h>
 #endif
 
 #include "mux.h"
@@ -1257,7 +1257,7 @@ static struct platform_device omap3_rom_rng_device = {
 static void __init rx51_init_omap3_rom_rng(void)
 {
 	if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
-		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
 		platform_device_register(&omap3_rom_rng_device);
 	}
 }
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 2d1e5a6beb85..41161ca97d74 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -136,6 +136,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	.init_irq	= omap3_init_irq,
 	.init_machine	= rx51_init,
 	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
+	.init_time	= omap_init_time,
 	.restart	= omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
deleted file mode 100644
index 3f6521313c93..000000000000
--- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * OMAP34xx M2 divider clock code
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3xxx.h"
-#include "sdrc.h"
-#include "sram.h"
-
-#define CYCLES_PER_MHZ			1000000
-
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/*
- * CORE DPLL (DPLL3) M2 divider rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate.  Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
-					unsigned long parent_rate)
-{
-	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
-	u32 new_div = 0;
-	u32 unlock_dll = 0;
-	u32 c;
-	unsigned long validrate, sdrcrate, _mpurate;
-	struct omap_sdrc_params *sdrc_cs0;
-	struct omap_sdrc_params *sdrc_cs1;
-	int ret;
-	unsigned long clkrate;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	new_div = DIV_ROUND_UP(parent_rate, rate);
-	validrate = parent_rate / new_div;
-
-	if (validrate != rate)
-		return -EINVAL;
-
-	sdrcrate = clk_get_rate(sdrc_ick_p);
-	clkrate = clk_hw_get_rate(hw);
-	if (rate > clkrate)
-		sdrcrate <<= ((rate / clkrate) >> 1);
-	else
-		sdrcrate >>= ((clkrate / rate) >> 1);
-
-	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
-	if (ret)
-		return -EINVAL;
-
-	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
-		pr_debug("clock: will unlock SDRC DLL\n");
-		unlock_dll = 1;
-	}
-
-	/*
-	 * XXX This only needs to be done when the CPU frequency changes
-	 */
-	_mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
-	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
-	c += 1;  /* for safety */
-	c *= SDRC_MPURATE_LOOPS;
-	c >>= SDRC_MPURATE_SCALE;
-	if (c == 0)
-		c = 1;
-
-	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
-		 clkrate, validrate);
-	pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
-	if (sdrc_cs1)
-		pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
-			 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-			 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
-	if (sdrc_cs1)
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clkrate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
-				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-	else
-		omap3_configure_core_dpll(
-				  new_div, unlock_dll, c, rate > clkrate,
-				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
-				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
-				  0, 0, 0, 0);
-	return 0;
-}
-
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index acb60ed17273..d058125876d8 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -225,5 +225,9 @@ void __init ti_clk_init_features(void)
 	if (omap_rev() == OMAP3430_REV_ES1_0)
 		features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
 
+	/* Errata I810 for omap5 / dra7 */
+	if (soc_is_omap54xx() || soc_is_dra7xx())
+		features.flags |= TI_CLK_ERRATA_I810;
+
 	ti_clk_setup_features(&features);
 }
diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c
index 53442c86a820..3b5fb05ae701 100644
--- a/arch/arm/mach-omap2/clockdomains81xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains81xx_data.c
@@ -83,6 +83,14 @@ static struct clockdomain mmu_cfg_81xx_clkdm = {
 	.flags		= CLKDM_CAN_SWSUP,
 };
 
+static struct clockdomain default_l3_slow_81xx_clkdm = {
+	.name		= "default_l3_slow_clkdm",
+	.pwrdm		= { .name = "default_pwrdm" },
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
+	.clkdm_offs	= TI816X_CM_DEFAULT_L3_SLOW_CLKDM,
+	.flags		= CLKDM_CAN_SWSUP,
+};
+
 /* 816x only */
 
 static struct clockdomain alwon_mpu_816x_clkdm = {
@@ -96,7 +104,7 @@ static struct clockdomain alwon_mpu_816x_clkdm = {
 static struct clockdomain active_gem_816x_clkdm = {
 	.name		= "active_gem_clkdm",
 	.pwrdm		= { .name = "active_pwrdm" },
-	.cm_inst	= TI816X_CM_ACTIVE_MOD,
+	.cm_inst	= TI81XX_CM_ACTIVE_MOD,
 	.clkdm_offs	= TI816X_CM_ACTIVE_GEM_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -128,7 +136,7 @@ static struct clockdomain ivahd2_816x_clkdm = {
 static struct clockdomain sgx_816x_clkdm = {
 	.name		= "sgx_clkdm",
 	.pwrdm		= { .name = "sgx_pwrdm" },
-	.cm_inst	= TI816X_CM_SGX_MOD,
+	.cm_inst	= TI81XX_CM_SGX_MOD,
 	.clkdm_offs	= TI816X_CM_SGX_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -136,7 +144,7 @@ static struct clockdomain sgx_816x_clkdm = {
 static struct clockdomain default_l3_med_816x_clkdm = {
 	.name		= "default_l3_med_clkdm",
 	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
 	.clkdm_offs	= TI816X_CM_DEFAULT_L3_MED_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -144,7 +152,7 @@ static struct clockdomain default_l3_med_816x_clkdm = {
 static struct clockdomain default_ducati_816x_clkdm = {
 	.name		= "default_ducati_clkdm",
 	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
 	.clkdm_offs	= TI816X_CM_DEFAULT_DUCATI_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
@@ -152,19 +160,11 @@ static struct clockdomain default_ducati_816x_clkdm = {
 static struct clockdomain default_pci_816x_clkdm = {
 	.name		= "default_pci_clkdm",
 	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
+	.cm_inst	= TI81XX_CM_DEFAULT_MOD,
 	.clkdm_offs	= TI816X_CM_DEFAULT_PCI_CLKDM,
 	.flags		= CLKDM_CAN_SWSUP,
 };
 
-static struct clockdomain default_l3_slow_816x_clkdm = {
-	.name		= "default_l3_slow_clkdm",
-	.pwrdm		= { .name = "default_pwrdm" },
-	.cm_inst	= TI816X_CM_DEFAULT_MOD,
-	.clkdm_offs	= TI816X_CM_DEFAULT_L3_SLOW_CLKDM,
-	.flags		= CLKDM_CAN_SWSUP,
-};
-
 static struct clockdomain *clockdomains_ti814x[] __initdata = {
 	&alwon_l3_slow_81xx_clkdm,
 	&alwon_l3_med_81xx_clkdm,
@@ -172,6 +172,7 @@ static struct clockdomain *clockdomains_ti814x[] __initdata = {
 	&alwon_ethernet_81xx_clkdm,
 	&mmu_81xx_clkdm,
 	&mmu_cfg_81xx_clkdm,
+	&default_l3_slow_81xx_clkdm,
 	NULL,
 };
 
@@ -198,7 +199,7 @@ static struct clockdomain *clockdomains_ti816x[] __initdata = {
 	&default_l3_med_816x_clkdm,
 	&default_ducati_816x_clkdm,
 	&default_pci_816x_clkdm,
-	&default_l3_slow_816x_clkdm,
+	&default_l3_slow_81xx_clkdm,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h
index 45cb407da222..3a0ccf07c76f 100644
--- a/arch/arm/mach-omap2/cm81xx.h
+++ b/arch/arm/mach-omap2/cm81xx.h
@@ -18,15 +18,15 @@
 #define __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H
 
 /* TI81XX common CM module offsets */
+#define TI81XX_CM_ACTIVE_MOD			0x0400	/* 256B */
+#define TI81XX_CM_DEFAULT_MOD			0x0500	/* 256B */
 #define TI81XX_CM_ALWON_MOD			0x1400	/* 1KB */
+#define TI81XX_CM_SGX_MOD			0x0900	/* 256B */
 
 /* TI816X CM module offsets */
-#define TI816X_CM_ACTIVE_MOD			0x0400	/* 256B */
-#define TI816X_CM_DEFAULT_MOD			0x0500	/* 256B */
 #define TI816X_CM_IVAHD0_MOD			0x0600	/* 256B */
 #define TI816X_CM_IVAHD1_MOD			0x0700	/* 256B */
 #define TI816X_CM_IVAHD2_MOD			0x0800	/* 256B */
-#define TI816X_CM_SGX_MOD			0x0900	/* 256B */
 
 /* ALWON */
 #define TI81XX_CM_ALWON_L3_SLOW_CLKDM		0x0000
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 92e92cfc2775..f7666b9f3b21 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -88,8 +88,7 @@ static inline int omap_mux_late_init(void)
 
 extern void omap2_init_common_infrastructure(void);
 
-extern void omap2_sync32k_timer_init(void);
-extern void omap3_sync32k_timer_init(void);
+extern void omap_init_time(void);
 extern void omap3_secure_sync32k_timer_init(void);
 extern void omap3_gptimer_timer_init(void);
 extern void omap4_local_timer_init(void);
@@ -271,7 +270,7 @@ extern u32 omap_read_auxcoreboot0(void);
 
 extern void omap4_cpu_die(unsigned int cpu);
 
-extern struct smp_operations omap4_smp_ops;
+extern const struct smp_operations omap4_smp_ops;
 
 extern void omap5_secondary_startup(void);
 extern void omap5_secondary_hyp_startup(void);
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index cf5855174c93..1662071bb2cc 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -36,7 +36,6 @@
 
 static void __iomem *omap2_ctrl_base;
 static s16 omap2_ctrl_offset;
-static struct regmap *omap2_ctrl_syscon;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 struct omap3_scratchpad {
@@ -166,16 +165,9 @@ u16 omap_ctrl_readw(u16 offset)
 
 u32 omap_ctrl_readl(u16 offset)
 {
-	u32 val;
-
 	offset &= 0xfffc;
-	if (!omap2_ctrl_syscon)
-		val = readl_relaxed(omap2_ctrl_base + offset);
-	else
-		regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
-			    &val);
 
-	return val;
+	return readl_relaxed(omap2_ctrl_base + offset);
 }
 
 void omap_ctrl_writeb(u8 val, u16 offset)
@@ -207,11 +199,7 @@ void omap_ctrl_writew(u16 val, u16 offset)
 void omap_ctrl_writel(u32 val, u16 offset)
 {
 	offset &= 0xfffc;
-	if (!omap2_ctrl_syscon)
-		writel_relaxed(val, omap2_ctrl_base + offset);
-	else
-		regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
-			     val);
+	writel_relaxed(val, omap2_ctrl_base + offset);
 }
 
 #ifdef CONFIG_ARCH_OMAP3
@@ -715,8 +703,6 @@ int __init omap_control_init(void)
 			if (IS_ERR(syscon))
 				return PTR_ERR(syscon);
 
-			omap2_ctrl_syscon = syscon;
-
 			if (of_get_child_by_name(scm_conf, "clocks")) {
 				ret = omap2_clk_provider_init(scm_conf,
 							      data->index,
@@ -724,9 +710,6 @@ int __init omap_control_init(void)
 				if (ret)
 					return ret;
 			}
-
-			iounmap(omap2_ctrl_base);
-			omap2_ctrl_base = NULL;
 		} else {
 			/* No scm_conf found, direct access */
 			ret = omap2_clk_provider_init(np, data->index, NULL,
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index aa7b379e2661..2a3db0bd9e15 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -34,6 +34,7 @@
 #include "pm.h"
 #include "control.h"
 #include "common.h"
+#include "soc.h"
 
 /* Mach specific information to be recorded in the C-state driver_data */
 struct omap3_idle_statedata {
@@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_driver = {
 	.safe_state_index = 0,
 };
 
+/*
+ * Numbers based on measurements made in October 2009 for PM optimized kernel
+ * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP,
+ * and worst case latencies).
+ */
+static struct cpuidle_driver omap3430_idle_driver = {
+	.name             = "omap3430_idle",
+	.owner            = THIS_MODULE,
+	.states = {
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 110 + 162,
+			.target_residency = 5,
+			.name		  = "C1",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 106 + 180,
+			.target_residency = 309,
+			.name		  = "C2",
+			.desc		  = "MPU ON + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 107 + 410,
+			.target_residency = 46057,
+			.name		  = "C3",
+			.desc		  = "MPU RET + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 121 + 3374,
+			.target_residency = 46057,
+			.name		  = "C4",
+			.desc		  = "MPU OFF + CORE ON",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 855 + 1146,
+			.target_residency = 46057,
+			.name		  = "C5",
+			.desc		  = "MPU RET + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7580 + 4134,
+			.target_residency = 484329,
+			.name		  = "C6",
+			.desc		  = "MPU OFF + CORE RET",
+		},
+		{
+			.enter		  = omap3_enter_idle_bm,
+			.exit_latency	  = 7505 + 15274,
+			.target_residency = 484329,
+			.name		  = "C7",
+			.desc		  = "MPU OFF + CORE OFF",
+		},
+	},
+	.state_count = ARRAY_SIZE(omap3_idle_data),
+	.safe_state_index = 0,
+};
+
 /* Public functions */
 
 /**
@@ -333,5 +397,8 @@ int __init omap3_idle_init(void)
 	if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
 		return -ENODEV;
 
-	return cpuidle_register(&omap3_idle_driver, NULL);
+	if (cpu_is_omap3430())
+		return cpuidle_register(&omap3430_idle_driver, NULL);
+	else
+		return cpuidle_register(&omap3_idle_driver, NULL);
 }
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index a69bd67e9028..d7f1d69daf6d 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -33,7 +32,6 @@
 #include "common.h"
 #include "mux.h"
 #include "control.h"
-#include "devices.h"
 #include "display.h"
 
 #define L3_MODULES_MAX_LEN 12
@@ -67,102 +65,8 @@ static int __init omap3_l3_init(void)
 }
 omap_postcore_initcall(omap3_l3_init);
 
-#if defined(CONFIG_IOMMU_API)
-
-#include <linux/platform_data/iommu-omap.h>
-
-static struct resource omap3isp_resources[] = {
-	{
-		.start		= OMAP3430_ISP_BASE,
-		.end		= OMAP3430_ISP_BASE + 0x12fc,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= OMAP3430_ISP_BASE2,
-		.end		= OMAP3430_ISP_BASE2 + 0x0600,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 24 + OMAP_INTC_START,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device omap3isp_device = {
-	.name		= "omap3isp",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap3isp_resources),
-	.resource	= omap3isp_resources,
-};
-
-static struct omap_iommu_arch_data omap3_isp_iommu = {
-	.name = "mmu_isp",
-};
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	if (of_have_populated_dt())
-		omap3_isp_iommu.name = "480bd400.mmu";
-
-	omap3isp_device.dev.platform_data = pdata;
-	omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
-
-	return platform_device_register(&omap3isp_device);
-}
-
-#else /* !CONFIG_IOMMU_API */
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
-	return 0;
-}
-
-#endif
-
-#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
-static inline void __init omap_init_mbox(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	struct omap_mbox_pdata *pdata;
-
-	oh = omap_hwmod_lookup("mailbox");
-	if (!oh) {
-		pr_err("%s: unable to find hwmod\n", __func__);
-		return;
-	}
-	if (!oh->dev_attr) {
-		pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
-		return;
-	}
-
-	pdata = (struct omap_mbox_pdata *)oh->dev_attr;
-	pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
-	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
-						__func__, PTR_ERR(pdev));
-}
-#else
-static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP2PLUS_MBOX */
-
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
-
-static struct platform_device omap_pcm = {
-	.name	= "omap-pcm-audio",
-	.id	= -1,
-};
-
-static void omap_init_audio(void)
-{
-	platform_device_register(&omap_pcm);
-}
-
-#else
-static inline void omap_init_audio(void) {}
-#endif
-
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -292,14 +196,12 @@ static int __init omap2_init_devices(void)
 	if (!of_have_populated_dt())
 		pinctrl_provide_dummies();
 
-	/*
-	 * please keep these calls, and their implementations above,
-	 * in alphabetical order so they're easier to sort through.
-	 */
-	omap_init_audio();
 	/* If dtb is there, the devices will be created dynamically */
 	if (!of_have_populated_dt()) {
-		omap_init_mbox();
+		/*
+		 * please keep these calls, and their implementations above,
+		 * in alphabetical order so they're easier to sort through.
+		 */
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();
diff --git a/arch/arm/mach-omap2/devices.h b/arch/arm/mach-omap2/devices.h
deleted file mode 100644
index f61eb6e5d136..000000000000
--- a/arch/arm/mach-omap2/devices.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-omap2/devices.h
- *
- * OMAP2 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
-#define __ARCH_ARM_MACH_OMAP_DEVICES_H
-
-struct isp_platform_data;
-
-int omap3_init_camera(struct isp_platform_data *pdata);
-
-#endif
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 1ed4be184a29..e58c13a9bea5 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/of.h>
 #include <linux/omap-dma.h>
 
@@ -203,6 +204,108 @@ static unsigned configure_dma_errata(void)
 	return errata;
 }
 
+static const struct dma_slave_map omap24xx_sdma_map[] = {
+	{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
+	{ "omap-aes", "tx", SDMA_FILTER_PARAM(9) },
+	{ "omap-aes", "rx", SDMA_FILTER_PARAM(10) },
+	{ "omap-sham", "rx", SDMA_FILTER_PARAM(13) },
+	{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
+	{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
+	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
+	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
+	{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
+	{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
+	{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
+	{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
+	{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
+	{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
+	{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
+	{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
+	{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
+	{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
+	{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
+	{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
+	{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
+	{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
+	{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
+	{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
+	{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
+	{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
+	{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
+	{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
+	{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
+	{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
+	{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
+	{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
+	{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
+	{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
+	{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
+	{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
+	{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
+	{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
+	{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
+};
+
+static const struct dma_slave_map omap3xxx_sdma_map[] = {
+	{ "omap-gpmc", "rxtx", SDMA_FILTER_PARAM(4) },
+	{ "omap2_mcspi.2", "tx0", SDMA_FILTER_PARAM(15) },
+	{ "omap2_mcspi.2", "rx0", SDMA_FILTER_PARAM(16) },
+	{ "omap-mcbsp.3", "tx", SDMA_FILTER_PARAM(17) },
+	{ "omap-mcbsp.3", "rx", SDMA_FILTER_PARAM(18) },
+	{ "omap-mcbsp.4", "tx", SDMA_FILTER_PARAM(19) },
+	{ "omap-mcbsp.4", "rx", SDMA_FILTER_PARAM(20) },
+	{ "omap-mcbsp.5", "tx", SDMA_FILTER_PARAM(21) },
+	{ "omap-mcbsp.5", "rx", SDMA_FILTER_PARAM(22) },
+	{ "omap2_mcspi.2", "tx1", SDMA_FILTER_PARAM(23) },
+	{ "omap2_mcspi.2", "rx1", SDMA_FILTER_PARAM(24) },
+	{ "omap_i2c.3", "tx", SDMA_FILTER_PARAM(25) },
+	{ "omap_i2c.3", "rx", SDMA_FILTER_PARAM(26) },
+	{ "omap_i2c.1", "tx", SDMA_FILTER_PARAM(27) },
+	{ "omap_i2c.1", "rx", SDMA_FILTER_PARAM(28) },
+	{ "omap_i2c.2", "tx", SDMA_FILTER_PARAM(29) },
+	{ "omap_i2c.2", "rx", SDMA_FILTER_PARAM(30) },
+	{ "omap-mcbsp.1", "tx", SDMA_FILTER_PARAM(31) },
+	{ "omap-mcbsp.1", "rx", SDMA_FILTER_PARAM(32) },
+	{ "omap-mcbsp.2", "tx", SDMA_FILTER_PARAM(33) },
+	{ "omap-mcbsp.2", "rx", SDMA_FILTER_PARAM(34) },
+	{ "omap2_mcspi.0", "tx0", SDMA_FILTER_PARAM(35) },
+	{ "omap2_mcspi.0", "rx0", SDMA_FILTER_PARAM(36) },
+	{ "omap2_mcspi.0", "tx1", SDMA_FILTER_PARAM(37) },
+	{ "omap2_mcspi.0", "rx1", SDMA_FILTER_PARAM(38) },
+	{ "omap2_mcspi.0", "tx2", SDMA_FILTER_PARAM(39) },
+	{ "omap2_mcspi.0", "rx2", SDMA_FILTER_PARAM(40) },
+	{ "omap2_mcspi.0", "tx3", SDMA_FILTER_PARAM(41) },
+	{ "omap2_mcspi.0", "rx3", SDMA_FILTER_PARAM(42) },
+	{ "omap2_mcspi.1", "tx0", SDMA_FILTER_PARAM(43) },
+	{ "omap2_mcspi.1", "rx0", SDMA_FILTER_PARAM(44) },
+	{ "omap2_mcspi.1", "tx1", SDMA_FILTER_PARAM(45) },
+	{ "omap2_mcspi.1", "rx1", SDMA_FILTER_PARAM(46) },
+	{ "omap_hsmmc.1", "tx", SDMA_FILTER_PARAM(47) },
+	{ "omap_hsmmc.1", "rx", SDMA_FILTER_PARAM(48) },
+	{ "omap_uart.0", "tx", SDMA_FILTER_PARAM(49) },
+	{ "omap_uart.0", "rx", SDMA_FILTER_PARAM(50) },
+	{ "omap_uart.1", "tx", SDMA_FILTER_PARAM(51) },
+	{ "omap_uart.1", "rx", SDMA_FILTER_PARAM(52) },
+	{ "omap_uart.2", "tx", SDMA_FILTER_PARAM(53) },
+	{ "omap_uart.2", "rx", SDMA_FILTER_PARAM(54) },
+	{ "omap_hsmmc.0", "tx", SDMA_FILTER_PARAM(61) },
+	{ "omap_hsmmc.0", "rx", SDMA_FILTER_PARAM(62) },
+	{ "omap-aes", "tx", SDMA_FILTER_PARAM(65) },
+	{ "omap-aes", "rx", SDMA_FILTER_PARAM(66) },
+	{ "omap-sham", "rx", SDMA_FILTER_PARAM(69) },
+	{ "omap2_mcspi.3", "tx0", SDMA_FILTER_PARAM(70) },
+	{ "omap2_mcspi.3", "rx0", SDMA_FILTER_PARAM(71) },
+	{ "omap_hsmmc.2", "tx", SDMA_FILTER_PARAM(77) },
+	{ "omap_hsmmc.2", "rx", SDMA_FILTER_PARAM(78) },
+	{ "omap_uart.3", "tx", SDMA_FILTER_PARAM(81) },
+	{ "omap_uart.3", "rx", SDMA_FILTER_PARAM(82) },
+};
+
 static struct omap_system_dma_plat_info dma_plat_info __initdata = {
 	.reg_map	= reg_map,
 	.channel_stride	= 0x60,
@@ -231,6 +334,20 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 	p.dma_attr = (struct omap_dma_dev_attr *)oh->dev_attr;
 	p.errata = configure_dma_errata();
 
+	if (!of_have_populated_dt()) {
+		if (soc_is_omap24xx()) {
+			p.slave_map = omap24xx_sdma_map;
+			p.slavecnt = ARRAY_SIZE(omap24xx_sdma_map);
+		} else if (soc_is_omap34xx() || soc_is_omap3630()) {
+			p.slave_map = omap3xxx_sdma_map;
+			p.slavecnt = ARRAY_SIZE(omap3xxx_sdma_map);
+		} else {
+			pr_err("%s: The legacy DMA map is not provided!\n",
+			       __func__);
+			return -ENODEV;
+		}
+	}
+
 	pdev = omap_device_build(name, 0, oh, &p, sizeof(p));
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s:%s.\n",
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 17a6f752a436..8633c703546a 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
 
 static void set_onenand_cfg(void __iomem *onenand_base)
 {
-	u32 reg;
+	u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT;
 
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
 	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
 		ONENAND_SYS_CFG1_BL_16;
 	if (onenand_flags & ONENAND_FLAG_SYNCREAD)
@@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base)
 		reg |= ONENAND_SYS_CFG1_VHF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_VHF;
+
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
 }
 
@@ -149,8 +148,8 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
 		freq = 104;
 		break;
 	default:
-		freq = 54;
-		break;
+		pr_err("onenand rate not detected, bad GPMC async timings?\n");
+		freq = 0;
 	}
 
 	return freq;
@@ -271,6 +270,11 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 	struct gpmc_timings t;
 	int ret;
 
+	/*
+	 * Note that we need to keep sync_write set for the call to
+	 * omap2_onenand_set_async_mode() to work to detect the onenand
+	 * supported clock rate for the sync timings.
+	 */
 	if (gpmc_onenand_data->of_node) {
 		gpmc_read_settings_dt(gpmc_onenand_data->of_node,
 				      &onenand_async);
@@ -281,12 +285,10 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
 			else
 				gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 			onenand_async.sync_read = false;
-			onenand_async.sync_write = false;
 		}
 	}
 
-	omap2_onenand_set_async_mode(onenand_base);
-
+	onenand_async.sync_write = true;
 	omap2_onenand_calc_async_timings(&t);
 
 	ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
@@ -310,6 +312,8 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
 	if (!freq) {
 		/* Very first call freq is not known */
 		freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+		if (!freq)
+			return -ENODEV;
 		set_onenand_cfg(onenand_base);
 	}
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 54a5ba54d2ff..2abd53ae3e7a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -57,15 +57,15 @@ int omap_type(void)
 	if (val < OMAP2_DEVICETYPE_MASK)
 		return val;
 
-	if (cpu_is_omap24xx()) {
+	if (soc_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	} else if (cpu_is_ti81xx()) {
+	} else if (soc_is_ti81xx()) {
 		val = omap_ctrl_readl(TI81XX_CONTROL_STATUS);
 	} else if (soc_is_am33xx() || soc_is_am43xx()) {
 		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
-	} else if (cpu_is_omap34xx()) {
+	} else if (soc_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
-	} else if (cpu_is_omap44xx()) {
+	} else if (soc_is_omap44xx()) {
 		val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
 	} else if (soc_is_omap54xx() || soc_is_dra7xx()) {
 		val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
@@ -122,7 +122,7 @@ static u16 tap_prod_id;
 
 void omap_get_die_id(struct omap_die_id *odi)
 {
-	if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
+	if (soc_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
 		odi->id_0 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_0);
 		odi->id_1 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_1);
 		odi->id_2 = read_tap_reg(OMAP_TAP_DIE_ID_44XX_2);
@@ -218,17 +218,17 @@ static void __init omap3_cpuinfo(void)
 	 * on available features. Upon detection, update the CPU id
 	 * and CPU class bits.
 	 */
-	if (cpu_is_omap3630()) {
+	if (soc_is_omap3630()) {
 		cpu_name = "OMAP3630";
 	} else if (soc_is_am35xx()) {
 		cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505";
-	} else if (cpu_is_ti816x()) {
+	} else if (soc_is_ti816x()) {
 		cpu_name = "TI816X";
 	} else if (soc_is_am335x()) {
 		cpu_name =  "AM335X";
 	} else if (soc_is_am437x()) {
 		cpu_name =  "AM437x";
-	} else if (cpu_is_ti814x()) {
+	} else if (soc_is_ti814x()) {
 		cpu_name = "TI814X";
 	} else if (omap3_has_iva() && omap3_has_sgx()) {
 		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
@@ -275,11 +275,11 @@ void __init omap3xxx_check_features(void)
 	OMAP3_CHECK_FEATURE(status, SGX);
 	OMAP3_CHECK_FEATURE(status, NEON);
 	OMAP3_CHECK_FEATURE(status, ISP);
-	if (cpu_is_omap3630())
+	if (soc_is_omap3630())
 		omap_features |= OMAP3_HAS_192MHZ_CLK;
-	if (cpu_is_omap3430() || cpu_is_omap3630())
+	if (soc_is_omap3430() || soc_is_omap3630())
 		omap_features |= OMAP3_HAS_IO_WAKEUP;
-	if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
+	if (soc_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 ||
 	    omap_rev() == OMAP3430_REV_ES3_1_2)
 		omap_features |= OMAP3_HAS_IO_CHAIN_CTRL;
 
@@ -488,6 +488,7 @@ void __init omap3xxx_check_revision(void)
 		}
 		break;
 	case 0xb8f2:
+	case 0xb968:
 		switch (rev) {
 		case 0:
 		/* FALLTHROUGH */
@@ -511,7 +512,8 @@ void __init omap3xxx_check_revision(void)
 		/* Unknown default to latest silicon rev as default */
 		omap_revision = OMAP3630_REV_ES1_2;
 		cpu_rev = "1.2";
-		pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n");
+		pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n",
+			hawkeye);
 	}
 	sprintf(soc_rev, "ES%s", cpu_rev);
 }
@@ -667,9 +669,9 @@ void __init dra7xxx_check_revision(void)
 		case 0:
 			omap_revision = DRA722_REV_ES1_0;
 			break;
+		case 1:
 		default:
-			/* If we have no new revisions */
-			omap_revision = DRA722_REV_ES1_0;
+			omap_revision = DRA722_REV_ES2_0;
 			break;
 		}
 		break;
@@ -701,7 +703,7 @@ void __init omap2_set_globals_tap(u32 class, void __iomem *tap)
 	tap_base = tap;
 
 	/* XXX What is this intended to do? */
-	if (cpu_is_omap34xx())
+	if (soc_is_omap34xx())
 		tap_prod_id = 0x0210;
 	else
 		tap_prod_id = 0x0208;
@@ -719,11 +721,11 @@ static const char * const omap_types[] = {
 
 static const char * __init omap_get_family(void)
 {
-	if (cpu_is_omap24xx())
+	if (soc_is_omap24xx())
 		return kasprintf(GFP_KERNEL, "OMAP2");
-	else if (cpu_is_omap34xx())
+	else if (soc_is_omap34xx())
 		return kasprintf(GFP_KERNEL, "OMAP3");
-	else if (cpu_is_omap44xx())
+	else if (soc_is_omap44xx())
 		return kasprintf(GFP_KERNEL, "OMAP4");
 	else if (soc_is_omap54xx())
 		return kasprintf(GFP_KERNEL, "OMAP5");
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 3eaeaca5da05..9821be6dfd5e 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
 void __init dra7xx_map_io(void)
 {
 	iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 /*
@@ -612,8 +613,7 @@ void __init ti814x_init_early(void)
 	ti814x_clockdomains_init();
 	dm814x_hwmod_init();
 	omap_hwmod_init_postsetup();
-	if (of_have_populated_dt())
-		omap_clk_soc_init = dm814x_dt_clk_init;
+	omap_clk_soc_init = dm814x_dt_clk_init;
 }
 
 void __init ti816x_init_early(void)
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 971791fe9a3f..593fec753b28 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -27,7 +27,7 @@
  * platform-specific code to shutdown a CPU
  * Called with IRQs disabled
  */
-void __ref omap4_cpu_die(unsigned int cpu)
+void omap4_cpu_die(unsigned int cpu)
 {
 	unsigned int boot_cpu = 0;
 	void __iomem *base = omap_get_wakeupgen_base();
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
deleted file mode 100644
index 8867eb4025bf..000000000000
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * omap iommu: omap device registration
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/platform_data/iommu-omap.h>
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused)
-{
-	struct platform_device *pdev;
-	struct iommu_platform_data *pdata;
-	struct omap_mmu_dev_attr *a = (struct omap_mmu_dev_attr *)oh->dev_attr;
-	static int i;
-
-	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return -ENOMEM;
-
-	pdata->name = oh->name;
-	pdata->nr_tlb_entries = a->nr_tlb_entries;
-
-	if (oh->rst_lines_cnt == 1) {
-		pdata->reset_name = oh->rst_lines->name;
-		pdata->assert_reset = omap_device_assert_hardreset;
-		pdata->deassert_reset = omap_device_deassert_hardreset;
-	}
-
-	pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata));
-
-	kfree(pdata);
-
-	if (IS_ERR(pdev)) {
-		pr_err("%s: device build err: %ld\n", __func__, PTR_ERR(pdev));
-		return PTR_ERR(pdev);
-	}
-
-	i++;
-
-	return 0;
-}
-
-static int __init omap_iommu_init(void)
-{
-	/* If dtb is there, the devices will be created dynamically */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL);
-}
-omap_subsys_initcall(omap_iommu_init);
-/* must be ready before omap3isp is probed */
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 5305ec7341ec..c625cc10d9f9 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -143,9 +143,9 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		 * Ensure that CPU power state is set to ON to avoid CPU
 		 * powerdomain transition on wfi
 		 */
-		clkdm_wakeup(cpu1_clkdm);
-		omap_set_pwrdm_state(cpu1_pwrdm, PWRDM_POWER_ON);
-		clkdm_allow_idle(cpu1_clkdm);
+		clkdm_wakeup_nolock(cpu1_clkdm);
+		pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON);
+		clkdm_allow_idle_nolock(cpu1_clkdm);
 
 		if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) {
 			while (gic_dist_disabled()) {
@@ -241,7 +241,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 
 }
 
-struct smp_operations omap4_smp_ops __initdata = {
+const struct smp_operations omap4_smp_ops __initconst = {
 	.smp_init_cpus		= omap4_smp_init_cpus,
 	.smp_prepare_cpus	= omap4_smp_prepare_cpus,
 	.smp_secondary_init	= omap4_secondary_init,
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index db7e0bab3587..f397bd6bd6e3 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
@@ -330,7 +331,7 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __refdata irq_hotplug_notifier = {
+static struct notifier_block irq_hotplug_notifier = {
 	.notifier_call = irq_cpu_hotplug_notify,
 };
 
@@ -540,9 +541,4 @@ static int __init wakeupgen_init(struct device_node *node,
 
 	return 0;
 }
-
-/*
- * We cannot use the IRQCHIP_DECLARE macro that lives in
- * drivers/irqchip, so we're forced to roll our own. Not very nice.
- */
-OF_DECLARE_2(irqchip, ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
+IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);
diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c
index d937b2e4040b..497269db882b 100644
--- a/arch/arm/mach-omap2/omap2-restart.c
+++ b/arch/arm/mach-omap2/omap2-restart.c
@@ -62,4 +62,4 @@ static int __init omap2xxx_common_look_up_clks_for_reset(void)
 
 	return 0;
 }
-omap_core_initcall(omap2xxx_common_look_up_clks_for_reset);
+omap_postcore_initcall(omap2xxx_common_look_up_clks_for_reset);
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 72ebc4c16bae..f7ff3b9dad87 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/pm_domain.h>
 #include <linux/pm_runtime.h>
 #include <linux/of.h>
 #include <linux/notifier.h>
@@ -168,7 +169,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 			r->name = dev_name(&pdev->dev);
 	}
 
-	pdev->dev.pm_domain = &omap_device_pm_domain;
+	dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain);
 
 	if (device_active) {
 		omap_device_enable(pdev);
@@ -180,7 +181,7 @@ odbfd_exit1:
 odbfd_exit:
 	/* if data/we are at fault.. load up a fail handler */
 	if (ret)
-		pdev->dev.pm_domain = &omap_device_fail_pm_domain;
+		dev_pm_domain_set(&pdev->dev, &omap_device_fail_pm_domain);
 
 	return ret;
 }
@@ -190,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_device *od;
+	int err;
 
 	switch (event) {
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdev->archdata.od)
 			omap_device_delete(pdev->archdata.od);
 		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		od = to_omap_device(pdev);
+		if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
+			dev_info(dev, "enabled after unload, idling\n");
+			err = omap_device_idle(pdev);
+			if (err)
+				dev_err(dev, "failed to idle\n");
+		}
+		break;
 	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdev->dev.of_node)
 			omap_device_build_from_dt(pdev);
@@ -601,8 +612,10 @@ static int _od_runtime_resume(struct device *dev)
 	int ret;
 
 	ret = omap_device_enable(pdev);
-	if (ret)
+	if (ret) {
+		dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n");
 		return ret;
+	}
 
 	return pm_generic_runtime_resume(dev);
 }
@@ -701,7 +714,7 @@ int omap_device_register(struct platform_device *pdev)
 {
 	pr_debug("omap_device: %s: registering\n", pdev->name);
 
-	pdev->dev.pm_domain = &omap_device_pm_domain;
+	dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain);
 	return platform_device_add(pdev);
 }
 
@@ -869,7 +882,7 @@ static int __init omap_device_init(void)
 	bus_register_notifier(&platform_bus_type, &platform_nb);
 	return 0;
 }
-omap_core_initcall(omap_device_init);
+omap_postcore_initcall(omap_device_init);
 
 /**
  * omap_device_late_idle - idle devices without drivers
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index cc8a987149e2..2af6ff63e3b4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -890,6 +890,36 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 	return ret;
 }
 
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+				 __clk_get_name(oc->_clk));
+			clk_enable(oc->_clk);
+		}
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+				 __clk_get_name(oc->_clk));
+			clk_disable(oc->_clk);
+		}
+}
+
 /**
  * _enable_clocks - enable hwmod main clock and interface clocks
  * @oh: struct omap_hwmod *
@@ -917,6 +947,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
 			clk_enable(os->_clk);
 	}
 
+	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+		_enable_optional_clocks(oh);
+
 	/* The opt clocks are controlled by the device driver. */
 
 	return 0;
@@ -948,41 +981,14 @@ static int _disable_clocks(struct omap_hwmod *oh)
 			clk_disable(os->_clk);
 	}
 
+	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+		_disable_optional_clocks(oh);
+
 	/* The opt clocks are controlled by the device driver. */
 
 	return 0;
 }
 
-static void _enable_optional_clocks(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	int i;
-
-	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk) {
-			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
-				 __clk_get_name(oc->_clk));
-			clk_enable(oc->_clk);
-		}
-}
-
-static void _disable_optional_clocks(struct omap_hwmod *oh)
-{
-	struct omap_hwmod_opt_clk *oc;
-	int i;
-
-	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
-
-	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
-		if (oc->_clk) {
-			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
-				 __clk_get_name(oc->_clk));
-			clk_disable(oc->_clk);
-		}
-}
-
 /**
  * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
  * @oh: struct omap_hwmod *
@@ -1410,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	/* If the cached value is the same as the new value, skip the write */
-	if (oh->_sysc_cache != v)
-		_write_sysconfig(v, oh);
+	_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -1475,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 }
 
 /**
@@ -2194,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh)
  */
 static int _idle(struct omap_hwmod *oh)
 {
+	if (oh->flags & HWMOD_NO_IDLE) {
+		oh->_int_flags |= _HWMOD_SKIP_ENABLE;
+		return 0;
+	}
+
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
@@ -2498,6 +2509,8 @@ static int __init _init(struct omap_hwmod *oh, void *data)
 			oh->flags |= HWMOD_INIT_NO_RESET;
 		if (of_find_property(np, "ti,no-idle-on-init", NULL))
 			oh->flags |= HWMOD_INIT_NO_IDLE;
+		if (of_find_property(np, "ti,no-idle", NULL))
+			oh->flags |= HWMOD_NO_IDLE;
 	}
 
 	oh->_state = _HWMOD_STATE_INITIALIZED;
@@ -2624,7 +2637,7 @@ static void __init _setup_postsetup(struct omap_hwmod *oh)
 	 * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
 	 * it should be set by the core code as a runtime flag during startup
 	 */
-	if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
+	if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) &&
 	    (postsetup_state == _HWMOD_STATE_IDLE)) {
 		oh->_int_flags |= _HWMOD_SKIP_ENABLE;
 		postsetup_state = _HWMOD_STATE_ENABLED;
@@ -3307,7 +3320,7 @@ static int __init omap_hwmod_setup_all(void)
 
 	return 0;
 }
-omap_core_initcall(omap_hwmod_setup_all);
+omap_postcore_initcall(omap_hwmod_setup_all);
 
 /**
  * omap_hwmod_enable - enable an omap_hwmod
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index ca6df1a73475..7c7a31169475 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -523,6 +523,10 @@ struct omap_hwmod_omap4_prcm {
  * HWMOD_RECONFIG_IO_CHAIN: omap_hwmod code needs to reconfigure wake-up 
  *     events by calling _reconfigure_io_chain() when a device is enabled
  *     or idled.
+ * HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
+ *     operate and they need to be handled at the same time as the main_clk.
+ * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
+ *     IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -538,6 +542,8 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_FORCE_MSTANDBY			(1 << 11)
 #define HWMOD_SWSUP_SIDLE_ACT			(1 << 12)
 #define HWMOD_RECONFIG_IO_CHAIN			(1 << 13)
+#define HWMOD_OPT_CLKS_NEEDED			(1 << 14)
+#define HWMOD_NO_IDLE				(1 << 15)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
index 8f5989d48a80..1c210cb2b8c1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c
@@ -152,20 +152,10 @@ struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space am33xx_elm_addr_space[] = {
-	{
-		.pa_start	= 0x48080000,
-		.pa_end		= 0x48080000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l4_ls__elm = {
 	.master		= &am33xx_l4_ls_hwmod,
 	.slave		= &am33xx_elm_hwmod,
 	.clk		= "l4ls_gclk",
-	.addr		= am33xx_elm_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -285,20 +275,10 @@ struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = {
 };
 
 /* l3s cfg -> gpmc */
-static struct omap_hwmod_addr_space am33xx_gpmc_addr_space[] = {
-	{
-		.pa_start	= 0x50000000,
-		.pa_end		= 0x50000000 + SZ_8K - 1,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = {
 	.master		= &am33xx_l3_s_hwmod,
 	.slave		= &am33xx_gpmc_hwmod,
 	.clk		= "l3s_gclk",
-	.addr		= am33xx_gpmc_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index dc55f8dedf2c..9869a75c5d96 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -25,8 +25,6 @@
 #include "l4_3xxx.h"
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/iommu-omap.h>
-#include <linux/platform_data/mailbox-omap.h>
 #include <plat/dmtimer.h>
 
 #include "soc.h"
@@ -1506,26 +1504,9 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = {
 	.sysc = &omap3xxx_mailbox_sysc,
 };
 
-static struct omap_mbox_dev_info omap3xxx_mailbox_info[] = {
-	{ .name = "dsp", .tx_id = 0, .rx_id = 1 },
-};
-
-static struct omap_mbox_pdata omap3xxx_mailbox_attrs = {
-	.num_users	= 2,
-	.num_fifos	= 2,
-	.info_cnt	= ARRAY_SIZE(omap3xxx_mailbox_info),
-	.info		= omap3xxx_mailbox_info,
-};
-
-static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = {
-	{ .irq = 26 + OMAP_INTC_START, },
-	{ .irq = -1 },
-};
-
 static struct omap_hwmod omap3xxx_mailbox_hwmod = {
 	.name		= "mailbox",
 	.class		= &omap3xxx_mailbox_hwmod_class,
-	.mpu_irqs	= omap3xxx_mailbox_irqs,
 	.main_clk	= "mailboxes_ick",
 	.prcm		= {
 		.omap2 = {
@@ -1536,7 +1517,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_MAILBOXES_SHIFT,
 		},
 	},
-	.dev_attr	= &omap3xxx_mailbox_attrs,
 };
 
 /*
@@ -2976,80 +2956,40 @@ static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = {
 };
 
 /* mmu isp */
-
-static struct omap_mmu_dev_attr mmu_isp_dev_attr = {
-	.nr_tlb_entries = 8,
-};
-
 static struct omap_hwmod omap3xxx_mmu_isp_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = {
-	{ .irq = 24 + OMAP_INTC_START, },
-	{ .irq = -1 }
-};
-
-static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = {
-	{
-		.pa_start	= 0x480bd400,
-		.pa_end		= 0x480bd47f,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
 
 /* l4_core -> mmu isp */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_mmu_isp_hwmod,
-	.addr		= omap3xxx_mmu_isp_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 static struct omap_hwmod omap3xxx_mmu_isp_hwmod = {
 	.name		= "mmu_isp",
 	.class		= &omap3xxx_mmu_hwmod_class,
-	.mpu_irqs	= omap3xxx_mmu_isp_irqs,
 	.main_clk	= "cam_ick",
-	.dev_attr	= &mmu_isp_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* mmu iva */
 
-static struct omap_mmu_dev_attr mmu_iva_dev_attr = {
-	.nr_tlb_entries = 32,
-};
-
 static struct omap_hwmod omap3xxx_mmu_iva_hwmod;
-static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = {
-	{ .irq = 28 + OMAP_INTC_START, },
-	{ .irq = -1 }
-};
 
 static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = {
 	{ .name = "mmu", .rst_shift = 1, .st_shift = 9 },
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = {
-	{
-		.pa_start	= 0x5d000000,
-		.pa_end		= 0x5d00007f,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l3_main -> iva mmu */
 static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = {
 	.master		= &omap3xxx_l3_main_hwmod,
 	.slave		= &omap3xxx_mmu_iva_hwmod,
-	.addr		= omap3xxx_mmu_iva_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
 	.name		= "mmu_iva",
 	.class		= &omap3xxx_mmu_hwmod_class,
-	.mpu_irqs	= omap3xxx_mmu_iva_irqs,
 	.clkdm_name	= "iva2_clkdm",
 	.rst_lines	= omap3xxx_mmu_iva_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_mmu_iva_resets),
@@ -3062,7 +3002,6 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = {
 			.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
 		},
 	},
-	.dev_attr	= &mmu_iva_dev_attr,
 	.flags		= HWMOD_NO_IDLEST,
 };
 
@@ -3276,20 +3215,10 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = {
-	{
-		.pa_start	= 0x48094000,
-		.pa_end		= 0x480941ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l4_core -> mailbox */
 static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap3xxx_mailbox_hwmod,
-	.addr		= omap3xxx_mailbox_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3654,14 +3583,14 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_class omap34xx_ssi_hwmod_class = {
+static struct omap_hwmod_class omap3xxx_ssi_hwmod_class = {
 	.name	= "ssi",
 	.sysc	= &omap34xx_ssi_sysc,
 };
 
-static struct omap_hwmod omap34xx_ssi_hwmod = {
+static struct omap_hwmod omap3xxx_ssi_hwmod = {
 	.name		= "ssi",
-	.class		= &omap34xx_ssi_hwmod_class,
+	.class		= &omap3xxx_ssi_hwmod_class,
 	.clkdm_name	= "core_l4_clkdm",
 	.main_clk	= "ssi_ssr_fck",
 	.prcm		= {
@@ -3676,9 +3605,9 @@ static struct omap_hwmod omap34xx_ssi_hwmod = {
 };
 
 /* L4 CORE -> SSI */
-static struct omap_hwmod_ocp_if omap34xx_l4_core__ssi = {
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__ssi = {
 	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap34xx_ssi_hwmod,
+	.slave		= &omap3xxx_ssi_hwmod,
 	.clk		= "ssi_ick",
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
@@ -3831,7 +3760,7 @@ static struct omap_hwmod_ocp_if *omap34xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_sad2d__l3,
 	&omap3xxx_l4_core__mmu_isp,
 	&omap3xxx_l3_main__mmu_iva,
-	&omap34xx_l4_core__ssi,
+	&omap3xxx_l4_core__ssi,
 	NULL
 };
 
@@ -3855,6 +3784,7 @@ static struct omap_hwmod_ocp_if *omap36xx_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_sad2d__l3,
 	&omap3xxx_l4_core__mmu_isp,
 	&omap3xxx_l3_main__mmu_iva,
+	&omap3xxx_l4_core__ssi,
 	NULL
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index e97a894b5f88..97fd399202dc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -1020,9 +1020,21 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
 
+static struct omap_hwmod_ocp_if *am43xx_rtc_hwmod_ocp_ifs[] __initdata = {
+	&am33xx_l4_wkup__rtc,
+	NULL,
+};
+
 int __init am43xx_hwmod_init(void)
 {
+	int ret;
+
 	omap_hwmod_am43xx_reg();
 	omap_hwmod_init();
-	return omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
+	ret = omap_hwmod_register_links(am43xx_hwmod_ocp_ifs);
+
+	if (!ret && of_machine_is_compatible("ti,am4372"))
+		ret = omap_hwmod_register_links(am43xx_rtc_hwmod_ocp_ifs);
+
+	return ret;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 43eebf2c59e2..dad871a4cd96 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -30,7 +30,6 @@
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
-#include <linux/platform_data/iommu-omap.h>
 #include <plat/dmtimer.h>
 
 #include "omap_hwmod.h"
@@ -2088,30 +2087,16 @@ static struct omap_hwmod_class omap44xx_mmu_hwmod_class = {
 
 /* mmu ipu */
 
-static struct omap_mmu_dev_attr mmu_ipu_dev_attr = {
-	.nr_tlb_entries = 32,
-};
-
 static struct omap_hwmod omap44xx_mmu_ipu_hwmod;
 static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = {
 	{ .name = "mmu_cache", .rst_shift = 2 },
 };
 
-static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = {
-	{
-		.pa_start	= 0x55082000,
-		.pa_end		= 0x550820ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l3_main_2 -> mmu_ipu */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_mmu_ipu_hwmod,
 	.clk		= "l3_div_ck",
-	.addr		= omap44xx_mmu_ipu_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2130,35 +2115,20 @@ static struct omap_hwmod omap44xx_mmu_ipu_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.dev_attr	= &mmu_ipu_dev_attr,
 };
 
 /* mmu dsp */
 
-static struct omap_mmu_dev_attr mmu_dsp_dev_attr = {
-	.nr_tlb_entries = 32,
-};
-
 static struct omap_hwmod omap44xx_mmu_dsp_hwmod;
 static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = {
 	{ .name = "mmu_cache", .rst_shift = 1 },
 };
 
-static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = {
-	{
-		.pa_start	= 0x4a066000,
-		.pa_end		= 0x4a0660ff,
-		.flags		= ADDR_TYPE_RT,
-	},
-	{ }
-};
-
 /* l4_cfg -> dsp */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_mmu_dsp_hwmod,
 	.clk		= "l4_div_ck",
-	.addr		= omap44xx_mmu_dsp_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2177,7 +2147,6 @@ static struct omap_hwmod omap44xx_mmu_dsp_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
-	.dev_attr	= &mmu_dsp_dev_attr,
 };
 
 /*
@@ -3915,21 +3884,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_addr_space omap44xx_elm_addrs[] = {
-	{
-		.pa_start	= 0x48078000,
-		.pa_end		= 0x48078fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_per -> elm */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = {
 	.master		= &omap44xx_l4_per_hwmod,
 	.slave		= &omap44xx_elm_hwmod,
 	.clk		= "l4_div_ck",
-	.addr		= omap44xx_elm_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -4471,21 +4430,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = {
-	{
-		.pa_start	= 0x4a0f6000,
-		.pa_end		= 0x4a0f6fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_cfg -> spinlock */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_spinlock_hwmod,
 	.clk		= "l4_div_ck",
-	.addr		= omap44xx_spinlock_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 7c3fac035e93..8cdfd9b7ab4f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1844,8 +1844,7 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_RESET_STATUS),
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 562247bced49..9442d89bd229 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -430,6 +430,67 @@ static struct omap_hwmod dra7xx_dma_system_hwmod = {
 };
 
 /*
+ * 'tpcc' class
+ *
+ */
+static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = {
+	.name		= "tpcc",
+};
+
+static struct omap_hwmod dra7xx_tpcc_hwmod = {
+	.name		= "tpcc",
+	.class		= &dra7xx_tpcc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.main_clk	= "l3_iclk_div",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET,
+		},
+	},
+};
+
+/*
+ * 'tptc' class
+ *
+ */
+static struct omap_hwmod_class dra7xx_tptc_hwmod_class = {
+	.name		= "tptc",
+};
+
+/* tptc0 */
+static struct omap_hwmod dra7xx_tptc0_hwmod = {
+	.name		= "tptc0",
+	.class		= &dra7xx_tptc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "l3_iclk_div",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/* tptc1 */
+static struct omap_hwmod dra7xx_tptc1_hwmod = {
+	.name		= "tptc1",
+	.class		= &dra7xx_tptc_hwmod_class,
+	.clkdm_name	= "l3main1_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
+	.main_clk	= "l3_iclk_div",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+};
+
+/*
  * 'dss' class
  *
  */
@@ -1298,6 +1359,44 @@ static struct omap_hwmod dra7xx_mcspi4_hwmod = {
 };
 
 /*
+ * 'mcasp' class
+ *
+ */
+static struct omap_hwmod_class_sysconfig dra7xx_mcasp_sysc = {
+	.sysc_offs	= 0x0004,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class dra7xx_mcasp_hwmod_class = {
+	.name	= "mcasp",
+	.sysc	= &dra7xx_mcasp_sysc,
+};
+
+/* mcasp3 */
+static struct omap_hwmod_opt_clk mcasp3_opt_clks[] = {
+	{ .role = "ahclkx", .clk = "mcasp3_ahclkx_mux" },
+};
+
+static struct omap_hwmod dra7xx_mcasp3_hwmod = {
+	.name		= "mcasp3",
+	.class		= &dra7xx_mcasp_hwmod_class,
+	.clkdm_name	= "l4per2_clkdm",
+	.main_clk	= "mcasp3_aux_gfclk_mux",
+	.flags		= HWMOD_OPT_CLKS_NEEDED,
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = DRA7XX_CM_L4PER2_MCASP3_CLKCTRL_OFFSET,
+			.context_offs = DRA7XX_RM_L4PER2_MCASP3_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.opt_clks	= mcasp3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(mcasp3_opt_clks),
+};
+
+/*
  * 'mmc' class
  *
  */
@@ -1444,8 +1543,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_ocp2scp_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
 			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -1489,19 +1587,49 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
  *
  */
 
+/*
+ * As noted in documentation for _reset() in omap_hwmod.c, the stock reset
+ * functionality of OMAP HWMOD layer does not deassert the hardreset lines
+ * associated with an IP automatically leaving the driver to handle that
+ * by itself. This does not work for PCIeSS which needs the reset lines
+ * deasserted for the driver to start accessing registers.
+ *
+ * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset
+ * lines after asserting them.
+ */
+static int dra7xx_pciess_reset(struct omap_hwmod *oh)
+{
+	int i;
+
+	for (i = 0; i < oh->rst_lines_cnt; i++) {
+		omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name);
+		omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name);
+	}
+
+	return 0;
+}
+
 static struct omap_hwmod_class dra7xx_pciess_hwmod_class = {
 	.name	= "pcie",
+	.reset	= dra7xx_pciess_reset,
 };
 
 /* pcie1 */
+static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = {
+	{ .name = "pcie", .rst_shift = 0 },
+};
+
 static struct omap_hwmod dra7xx_pciess1_hwmod = {
 	.name		= "pcie1",
 	.class		= &dra7xx_pciess_hwmod_class,
 	.clkdm_name	= "pcie_clkdm",
+	.rst_lines	= dra7xx_pciess1_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess1_resets),
 	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET,
+			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
 			.context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET,
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
@@ -1509,14 +1637,22 @@ static struct omap_hwmod dra7xx_pciess1_hwmod = {
 };
 
 /* pcie2 */
+static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = {
+	{ .name = "pcie", .rst_shift = 1 },
+};
+
+/* pcie2 */
 static struct omap_hwmod dra7xx_pciess2_hwmod = {
 	.name		= "pcie2",
 	.class		= &dra7xx_pciess_hwmod_class,
 	.clkdm_name	= "pcie_clkdm",
+	.rst_lines	= dra7xx_pciess2_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(dra7xx_pciess2_resets),
 	.main_clk	= "l4_root_clk_div",
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET,
+			.rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET,
 			.context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET,
 			.modulemode   = MODULEMODE_SWCTRL,
 		},
@@ -2065,7 +2201,7 @@ static struct omap_hwmod dra7xx_uart4_hwmod = {
 	.class		= &dra7xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
 	.main_clk	= "uart4_gfclk_mux",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART4_FLAGS,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET,
@@ -2511,6 +2647,30 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__dma_system = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* l3_main_1 -> tpcc */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_tpcc_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_main_1 -> tptc0 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_tptc0_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
+/* l3_main_1 -> tptc1 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_tptc1_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU,
+};
+
 static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = {
 	{
 		.name		= "family",
@@ -2566,13 +2726,20 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_elm_addrs[] = {
-	{
-		.pa_start	= 0x48078000,
-		.pa_end		= 0x48078fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
+/* l4_per2 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__mcasp3 = {
+	.master		= &dra7xx_l4_per2_hwmod,
+	.slave		= &dra7xx_mcasp3_hwmod,
+	.clk		= "l4_root_clk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l3_main_1 -> mcasp3 */
+static struct omap_hwmod_ocp_if dra7xx_l3_main_1__mcasp3 = {
+	.master		= &dra7xx_l3_main_1_hwmod,
+	.slave		= &dra7xx_mcasp3_hwmod,
+	.clk		= "l3_iclk_div",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
 /* l4_per1 -> elm */
@@ -2580,7 +2747,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__elm = {
 	.master		= &dra7xx_l4_per1_hwmod,
 	.slave		= &dra7xx_elm_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_elm_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -2648,21 +2814,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_per1__gpio8 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_gpmc_addrs[] = {
-	{
-		.pa_start	= 0x50000000,
-		.pa_end		= 0x500003ff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l3_main_1 -> gpmc */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = {
 	.master		= &dra7xx_l3_main_1_hwmod,
 	.slave		= &dra7xx_gpmc_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_gpmc_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3029,21 +3185,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__smartreflex_mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-static struct omap_hwmod_addr_space dra7xx_spinlock_addrs[] = {
-	{
-		.pa_start	= 0x4a0f6000,
-		.pa_end		= 0x4a0f6fff,
-		.flags		= ADDR_TYPE_RT
-	},
-	{ }
-};
-
 /* l4_cfg -> spinlock */
 static struct omap_hwmod_ocp_if dra7xx_l4_cfg__spinlock = {
 	.master		= &dra7xx_l4_cfg_hwmod,
 	.slave		= &dra7xx_spinlock_hwmod,
 	.clk		= "l3_iclk_div",
-	.addr		= dra7xx_spinlock_addrs,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
@@ -3338,8 +3484,13 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_wkup__dcan1,
 	&dra7xx_l4_per2__dcan2,
 	&dra7xx_l4_per2__cpgmac0,
+	&dra7xx_l4_per2__mcasp3,
+	&dra7xx_l3_main_1__mcasp3,
 	&dra7xx_gmac__mdio,
 	&dra7xx_l4_cfg__dma_system,
+	&dra7xx_l3_main_1__tpcc,
+	&dra7xx_l3_main_1__tptc0,
+	&dra7xx_l3_main_1__tptc1,
 	&dra7xx_l3_main_1__dss,
 	&dra7xx_l3_main_1__dispc,
 	&dra7xx_l3_main_1__hdmi,
diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
index b1288f56d509..df8327713d06 100644
--- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c
@@ -104,8 +104,8 @@
  * The default .clkctrl_offs field is offset from CM_DEFAULT, that's
  * TRM 18.7.6 CM_DEFAULT device register values minus 0x500
  */
-#define DM816X_CM_DEFAULT_OFFSET	0x500
-#define DM816X_CM_DEFAULT_USB_CLKCTRL	(0x558 - DM816X_CM_DEFAULT_OFFSET)
+#define DM81XX_CM_DEFAULT_OFFSET	0x500
+#define DM81XX_CM_DEFAULT_USB_CLKCTRL	(0x558 - DM81XX_CM_DEFAULT_OFFSET)
 
 /* L3 Interconnect entries clocked at 125, 250 and 500MHz */
 static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = {
@@ -144,6 +144,7 @@ static struct omap_hwmod dm81xx_l4_ls_hwmod = {
 	.name		= "l4_ls",
 	.clkdm_name	= "alwon_l3s_clkdm",
 	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /*
@@ -155,6 +156,7 @@ static struct omap_hwmod dm81xx_l4_hs_hwmod = {
 	.name		= "l4_hs",
 	.clkdm_name	= "alwon_l3_med_clkdm",
 	.class		= &l4_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 /* L3 slow -> L4 ls peripheral interface running at 125MHz */
@@ -226,6 +228,42 @@ static struct omap_hwmod_ocp_if dm816x_mpu__alwon_l3_med = {
 	.user	= OCP_USER_MPU,
 };
 
+/* RTC */
+static struct omap_hwmod_class_sysconfig ti81xx_rtc_sysc = {
+	.rev_offs	= 0x74,
+	.sysc_offs	= 0x78,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO |
+			  SIDLE_SMART | SIDLE_SMART_WKUP,
+	.sysc_fields	= &omap_hwmod_sysc_type3,
+};
+
+static struct omap_hwmod_class ti81xx_rtc_hwmod_class = {
+	.name		= "rtc",
+	.sysc		= &ti81xx_rtc_sysc,
+};
+
+struct omap_hwmod ti81xx_rtc_hwmod = {
+	.name		= "rtc",
+	.class		= &ti81xx_rtc_hwmod_class,
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.flags		= HWMOD_NO_IDLEST,
+	.main_clk	= "sysclk18_ck",
+	.prcm		= {
+		.omap4	= {
+			.clkctrl_offs = DM81XX_CM_ALWON_RTC_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_ocp_if ti81xx_l4_ls__rtc = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &ti81xx_rtc_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
 /* UART common */
 static struct omap_hwmod_class_sysconfig uart_sysc = {
 	.rev_offs	= 0x50,
@@ -427,6 +465,7 @@ static struct omap_hwmod dm81xx_elm_hwmod = {
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__elm = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_elm_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -476,6 +515,7 @@ static struct omap_hwmod dm81xx_gpio1_hwmod = {
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio1 = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_gpio1_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -502,6 +542,7 @@ static struct omap_hwmod dm81xx_gpio2_hwmod = {
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__gpio2 = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_gpio2_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -541,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
 	.user		= OCP_USER_MPU,
 };
 
+/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
 static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x10,
+	.srst_udelay	= 2,
 	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
 				SYSC_HAS_SOFTRESET,
 	.idlemodes	= SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,
@@ -555,22 +598,42 @@ static struct omap_hwmod_class dm81xx_usbotg_class = {
 	.sysc = &dm81xx_usbhsotg_sysc,
 };
 
-static struct omap_hwmod dm81xx_usbss_hwmod = {
+static struct omap_hwmod dm814x_usbss_hwmod = {
+	.name		= "usb_otg_hs",
+	.clkdm_name	= "default_l3_slow_clkdm",
+	.main_clk	= "pll260dcoclkldo",	/* 481c5260.adpll.dcoclkldo */
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.class		= &dm81xx_usbotg_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_default_l3_slow__usbss = {
+	.master		= &dm81xx_default_l3_slow_hwmod,
+	.slave		= &dm814x_usbss_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod dm816x_usbss_hwmod = {
 	.name		= "usb_otg_hs",
 	.clkdm_name	= "default_l3_slow_clkdm",
 	.main_clk	= "sysclk6_ck",
 	.prcm		= {
 		.omap4 = {
-			.clkctrl_offs = DM816X_CM_DEFAULT_USB_CLKCTRL,
+			.clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL,
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
 	.class		= &dm81xx_usbotg_class,
 };
 
-static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = {
+static struct omap_hwmod_ocp_if dm816x_default_l3_slow__usbss = {
 	.master		= &dm81xx_default_l3_slow_hwmod,
-	.slave		= &dm81xx_usbss_hwmod,
+	.slave		= &dm816x_usbss_hwmod,
 	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
@@ -597,7 +660,7 @@ static struct omap_timer_capability_dev_attr capability_alwon_dev_attr = {
 static struct omap_hwmod dm814x_timer1_hwmod = {
 	.name		= "timer1",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "timer_sys_ck",
+	.main_clk	= "timer1_fck",
 	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
@@ -606,7 +669,7 @@ static struct omap_hwmod dm814x_timer1_hwmod = {
 static struct omap_hwmod_ocp_if dm814x_l4_ls__timer1 = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm814x_timer1_hwmod,
-	.clk		= "timer_sys_ck",
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -634,7 +697,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer1 = {
 static struct omap_hwmod dm814x_timer2_hwmod = {
 	.name		= "timer2",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.main_clk	= "timer_sys_ck",
+	.main_clk	= "timer2_fck",
 	.dev_attr	= &capability_alwon_dev_attr,
 	.class		= &dm816x_timer_hwmod_class,
 	.flags		= HWMOD_NO_IDLEST,
@@ -643,7 +706,7 @@ static struct omap_hwmod dm814x_timer2_hwmod = {
 static struct omap_hwmod_ocp_if dm814x_l4_ls__timer2 = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm814x_timer2_hwmod,
-	.clk		= "timer_sys_ck",
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -850,6 +913,7 @@ static struct omap_hwmod dm816x_emac0_hwmod = {
 	.name		= "emac0",
 	.clkdm_name	= "alwon_ethernet_clkdm",
 	.class		= &dm816x_emac_hwmod_class,
+	.flags		= HWMOD_NO_IDLEST,
 };
 
 static struct omap_hwmod_ocp_if dm81xx_l4_hs__emac0 = {
@@ -909,7 +973,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
+static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x110,
 	.syss_offs	= 0x114,
@@ -920,24 +984,94 @@ static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = {
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
-static struct omap_hwmod_class dm816x_mmc_class = {
+static struct omap_hwmod_class dm81xx_mmc_class = {
 	.name = "mmc",
-	.sysc = &dm816x_mmc_sysc,
+	.sysc = &dm81xx_mmc_sysc,
 };
 
-static struct omap_hwmod_opt_clk dm816x_mmc1_opt_clks[] = {
+static struct omap_hwmod_opt_clk dm81xx_mmc_opt_clks[] = {
 	{ .role = "dbck", .clk = "sysclk18_ck", },
 };
 
-static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
-	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
+static struct omap_hsmmc_dev_attr mmc_dev_attr = {
+};
+
+static struct omap_hwmod dm814x_mmc1_hwmod = {
+	.name		= "mmc1",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_0_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc1 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_mmc1_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc2_hwmod = {
+	.name		= "mmc2",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_1_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc2 = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm814x_mmc2_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+	.flags		= OMAP_FIREWALL_L4
+};
+
+static struct omap_hwmod dm814x_mmc3_hwmod = {
+	.name		= "mmc3",
+	.clkdm_name	= "alwon_l3_med_clkdm",
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
+	.main_clk	= "sysclk8_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM814X_CM_ALWON_MMCHS_2_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
+};
+
+static struct omap_hwmod_ocp_if dm814x_alwon_l3_med__mmc3 = {
+	.master		= &dm81xx_alwon_l3_med_hwmod,
+	.slave		= &dm814x_mmc3_hwmod,
+	.clk		= "sysclk4_ck",
+	.user		= OCP_USER_MPU,
 };
 
 static struct omap_hwmod dm816x_mmc1_hwmod = {
 	.name		= "mmc1",
 	.clkdm_name	= "alwon_l3s_clkdm",
-	.opt_clks	= dm816x_mmc1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(dm816x_mmc1_opt_clks),
+	.opt_clks	= dm81xx_mmc_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(dm81xx_mmc_opt_clks),
 	.main_clk	= "sysclk10_ck",
 	.prcm		= {
 		.omap4 = {
@@ -945,8 +1079,8 @@ static struct omap_hwmod dm816x_mmc1_hwmod = {
 			.modulemode = MODULEMODE_SWCTRL,
 		},
 	},
-	.dev_attr	= &mmc1_dev_attr,
-	.class		= &dm816x_mmc_class,
+	.dev_attr	= &mmc_dev_attr,
+	.class		= &dm81xx_mmc_class,
 };
 
 static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = {
@@ -1030,6 +1164,42 @@ static struct omap_hwmod dm81xx_mailbox_hwmod = {
 static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = {
 	.master		= &dm81xx_l4_ls_hwmod,
 	.slave		= &dm81xx_mailbox_hwmod,
+	.clk		= "sysclk6_ck",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_class_sysconfig dm81xx_spinbox_sysc = {
+	.rev_offs	= 0x000,
+	.sysc_offs	= 0x010,
+	.syss_offs	= 0x014,
+	.sysc_flags	= SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+				SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE,
+	.idlemodes	= SIDLE_FORCE | SIDLE_NO | SIDLE_SMART,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class dm81xx_spinbox_hwmod_class = {
+	.name = "spinbox",
+	.sysc = &dm81xx_spinbox_sysc,
+};
+
+static struct omap_hwmod dm81xx_spinbox_hwmod = {
+	.name		= "spinbox",
+	.clkdm_name	= "alwon_l3s_clkdm",
+	.class		= &dm81xx_spinbox_hwmod_class,
+	.main_clk	= "sysclk6_ck",
+	.prcm		= {
+		.omap4 = {
+			.clkctrl_offs = DM81XX_CM_ALWON_SPINBOX_CLKCTRL,
+			.modulemode = MODULEMODE_SWCTRL,
+		},
+	},
+};
+
+static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = {
+	.master		= &dm81xx_l4_ls_hwmod,
+	.slave		= &dm81xx_spinbox_hwmod,
+	.clk		= "sysclk6_ck",
 	.user		= OCP_USER_MPU,
 };
 
@@ -1227,11 +1397,7 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = {
 
 /*
  * REVISIT: Test and enable the following once clocks work:
- * dm81xx_l4_ls__gpio1
- * dm81xx_l4_ls__gpio2
  * dm81xx_l4_ls__mailbox
- * dm81xx_alwon_l3_slow__gpmc
- * dm81xx_default_l3_slow__usbss
  *
  * Also note that some devices share a single clkctrl_offs..
  * For example, i2c1 and 3 share one, and i2c2 and 4 share one.
@@ -1247,8 +1413,13 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_l4_ls__wd_timer1,
 	&dm81xx_l4_ls__i2c1,
 	&dm81xx_l4_ls__i2c2,
+	&dm81xx_l4_ls__gpio1,
+	&dm81xx_l4_ls__gpio2,
 	&dm81xx_l4_ls__elm,
 	&dm81xx_l4_ls__mcspi1,
+	&dm814x_l4_ls__mmc1,
+	&dm814x_l4_ls__mmc2,
+	&ti81xx_l4_ls__rtc,
 	&dm81xx_alwon_l3_fast__tpcc,
 	&dm81xx_alwon_l3_fast__tptc0,
 	&dm81xx_alwon_l3_fast__tptc1,
@@ -1262,6 +1433,9 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = {
 	&dm814x_l4_ls__timer2,
 	&dm814x_l4_hs__cpgmac0,
 	&dm814x_cpgmac0__mdio,
+	&dm81xx_alwon_l3_slow__gpmc,
+	&dm814x_default_l3_slow__usbss,
+	&dm814x_alwon_l3_med__mmc3,
 	NULL,
 };
 
@@ -1285,6 +1459,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_l4_ls__gpio1,
 	&dm81xx_l4_ls__gpio2,
 	&dm81xx_l4_ls__elm,
+	&ti81xx_l4_ls__rtc,
 	&dm816x_l4_ls__mmc1,
 	&dm816x_l4_ls__timer1,
 	&dm816x_l4_ls__timer2,
@@ -1295,6 +1470,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
 	&dm816x_l4_ls__timer7,
 	&dm81xx_l4_ls__mcspi1,
 	&dm81xx_l4_ls__mailbox,
+	&dm81xx_l4_ls__spinbox,
 	&dm81xx_l4_hs__emac0,
 	&dm81xx_emac0__mdio,
 	&dm816x_l4_hs__emac1,
@@ -1308,7 +1484,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = {
 	&dm81xx_tptc2__alwon_l3_fast,
 	&dm81xx_tptc3__alwon_l3_fast,
 	&dm81xx_alwon_l3_slow__gpmc,
-	&dm81xx_default_l3_slow__usbss,
+	&dm816x_default_l3_slow__usbss,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 1dfe34654c43..a935d28443da 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -23,9 +23,8 @@
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
 #include <linux/platform_data/wkup_m3.h>
-
-#include <asm/siginfo.h>
-#include <asm/signal.h>
+#include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <plat/dmtimer.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -153,6 +152,21 @@ static struct platform_device wl18xx_device = {
 	}
 };
 
+static struct ti_st_plat_data wilink7_pdata = {
+	.nshutdown_gpio = 162,
+	.dev_name = "/dev/ttyO1",
+	.flow_cntrl = 1,
+	.baud_rate = 300000,
+};
+
+static struct platform_device wl128x_device = {
+	.name	= "kim",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wilink7_pdata,
+	}
+};
+
 static struct platform_device btwilink_device = {
 	.name	= "btwilink",
 	.id	= -1,
@@ -268,7 +282,7 @@ static void __init nokia_n900_legacy_init(void)
 			pr_warn("Thumb binaries may crash randomly without this workaround\n");
 		}
 
-		pr_info("RX-51: Registring OMAP3 HWRNG device\n");
+		pr_info("RX-51: Registering OMAP3 HWRNG device\n");
 		platform_device_register(&omap3_rom_rng_device);
 
 	}
@@ -279,6 +293,13 @@ static void __init omap3_tao3530_legacy_init(void)
 	hsmmc2_internal_input_clk();
 }
 
+static void __init omap3_logicpd_torpedo_init(void)
+{
+	omap3_gpio126_127_129();
+	platform_device_register(&wl128x_device);
+	platform_device_register(&btwilink_device);
+}
+
 /* omap3pandora legacy devices */
 #define PANDORA_WIFI_IRQ_GPIO		21
 #define PANDORA_WIFI_NRESET_GPIO	23
@@ -385,29 +406,6 @@ static void __init omap3_pandora_legacy_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#ifdef CONFIG_SOC_TI81XX
-static int fault_fixed_up;
-
-static int t410_abort_handler(unsigned long addr, unsigned int fsr,
-			      struct pt_regs *regs)
-{
-	if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) {
-		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
-			addr, fsr);
-		fault_fixed_up = 1;
-		return 0;
-	}
-
-	return 1;
-}
-
-static void __init t410_abort_init(void)
-{
-	hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR,
-			"imprecise external abort");
-}
-#endif
-
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 static struct iommu_platform_data omap4_iommu_pdata = {
 	.reset_name = "mmu_cache",
@@ -453,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev)
 	dev->platform_data = &twl_gpio_auxdata;
 }
 
+/* Dual mode timer PWM callbacks platdata */
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
+	.request_by_node = omap_dm_timer_request_by_node,
+	.free = omap_dm_timer_free,
+	.enable = omap_dm_timer_enable,
+	.disable = omap_dm_timer_disable,
+	.get_fclk = omap_dm_timer_get_fclk,
+	.start = omap_dm_timer_start,
+	.stop = omap_dm_timer_stop,
+	.set_load = omap_dm_timer_set_load,
+	.set_match = omap_dm_timer_set_match,
+	.set_pwm = omap_dm_timer_set_pwm,
+	.set_prescaler = omap_dm_timer_set_prescaler,
+	.write_counter = omap_dm_timer_write_counter,
+};
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -506,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
 		       &wkup_m3_data),
 #endif
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+	OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
+#endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
 		       &omap4_iommu_pdata),
@@ -529,16 +548,13 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
 	{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
-	{ "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
+	{ "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },
 	{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
 	{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
 	{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
 #endif
-#ifdef CONFIG_SOC_TI81XX
-	{ "hp,t410", t410_abort_init, },
-#endif
 #ifdef CONFIG_SOC_OMAP5
 	{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
 #endif
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 87b98bf92366..2dbd3785ee6f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -301,11 +301,11 @@ static void omap3_pm_idle(void)
 	if (omap_irq_pending())
 		return;
 
-	trace_cpu_idle(1, smp_processor_id());
+	trace_cpu_idle_rcuidle(1, smp_processor_id());
 
 	omap_sram_idle();
 
-	trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
+	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 }
 
 #ifdef CONFIG_SUSPEND
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index d697cecf762b..178e22c146b7 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -210,7 +210,7 @@ static inline int omap4plus_init_static_deps(const struct static_dep_map *map)
 		}
 
 		map++;
-	};
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index d31c495175c1..eb27ae066292 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -384,14 +384,14 @@ static struct powerdomain isp_814x_pwrdm = {
 	.voltdm		= { .name = "core" },
 };
 
-static struct powerdomain active_816x_pwrdm = {
+static struct powerdomain active_81xx_pwrdm = {
 	.name		  = "active_pwrdm",
 	.prcm_offs	  = TI816X_PRM_ACTIVE_MOD,
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.voltdm		  = { .name = "core" },
 };
 
-static struct powerdomain default_816x_pwrdm = {
+static struct powerdomain default_81xx_pwrdm = {
 	.name		  = "default_pwrdm",
 	.prcm_offs	  = TI81XX_PRM_DEFAULT_MOD,
 	.pwrsts		  = PWRSTS_OFF_ON,
@@ -486,6 +486,8 @@ static struct powerdomain *powerdomains_am35x[] __initdata = {
 static struct powerdomain *powerdomains_ti814x[] __initdata = {
 	&alwon_81xx_pwrdm,
 	&device_81xx_pwrdm,
+	&active_81xx_pwrdm,
+	&default_81xx_pwrdm,
 	&gem_814x_pwrdm,
 	&ivahd_814x_pwrdm,
 	&hdvpss_814x_pwrdm,
@@ -497,8 +499,8 @@ static struct powerdomain *powerdomains_ti814x[] __initdata = {
 static struct powerdomain *powerdomains_ti816x[] __initdata = {
 	&alwon_81xx_pwrdm,
 	&device_81xx_pwrdm,
-	&active_816x_pwrdm,
-	&default_816x_pwrdm,
+	&active_81xx_pwrdm,
+	&default_81xx_pwrdm,
 	&ivahd0_816x_pwrdm,
 	&ivahd1_816x_pwrdm,
 	&ivahd2_816x_pwrdm,
@@ -582,7 +584,7 @@ void __init omap3xxx_powerdomains_init(void)
 
 	/* Only 81xx needs custom pwrdm_operations */
 	if (!cpu_is_ti81xx())
-		pwrdm_register_platform_funcs(&omap3_pwrdm_operations);;
+		pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
 
 	rev = omap_rev();
 
diff --git a/arch/arm/mach-omap2/prm7xx.h b/arch/arm/mach-omap2/prm7xx.h
index cc1e6a2b97f6..294deed956f3 100644
--- a/arch/arm/mach-omap2/prm7xx.h
+++ b/arch/arm/mach-omap2/prm7xx.h
@@ -360,6 +360,7 @@
 /* PRM.L3INIT_PRM register offsets */
 #define DRA7XX_PM_L3INIT_PWRSTCTRL_OFFSET			0x0000
 #define DRA7XX_PM_L3INIT_PWRSTST_OFFSET				0x0004
+#define DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET			0x0010
 #define DRA7XX_PM_L3INIT_MMC1_WKDEP_OFFSET			0x0028
 #define DRA7XX_RM_L3INIT_MMC1_CONTEXT_OFFSET			0x002c
 #define DRA7XX_PM_L3INIT_MMC2_WKDEP_OFFSET			0x0030
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 3fc2cbe52113..5b2f5138d938 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -664,6 +664,13 @@ static struct omap_prcm_init_data am3_prm_data __initdata = {
 };
 #endif
 
+#ifdef CONFIG_SOC_TI81XX
+static struct omap_prcm_init_data dm814_pllss_data __initdata = {
+	.index = TI_CLKM_PLLSS,
+	.init = am33xx_prm_init,
+};
+#endif
+
 #ifdef CONFIG_ARCH_OMAP4
 static struct omap_prcm_init_data omap4_prm_data __initdata = {
 	.index = TI_CLKM_PRM,
@@ -715,6 +722,7 @@ static const struct of_device_id const omap_prcm_dt_match_table[] __initconst =
 #endif
 #ifdef CONFIG_SOC_TI81XX
 	{ .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+	{ .compatible = "ti,dm814-pllss", .data = &dm814_pllss_data },
 	{ .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
 #endif
 #ifdef CONFIG_ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 5fb50fe54153..8e072de89fed 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -213,7 +213,7 @@ static int __init omap_serial_early_init(void)
 
 	return 0;
 }
-omap_core_initcall(omap_serial_early_init);
+omap_postcore_initcall(omap_serial_early_init);
 
 /**
  * omap_serial_init_port() - initialize single serial port
@@ -252,7 +252,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata,
 		info = omap_serial_default_info;
 
 	oh = uart->oh;
-	name = DRIVER_NAME;
+	name = OMAP_SERIAL_DRIVER_NAME;
 
 	omap_up.dma_enabled = info->dma_enabled;
 	omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index eafd120b53f1..1b9f0520dea9 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r2, l2dis_3630	@ may be too distant for plain adr
-	str	r1, [r2]
+	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	ldr	r2, [r3]		@ value for offset
+	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
-	.text
-/* Function to call rom code to save secure ram context */
+/*
+ * Function to call rom code to save secure ram context. This gets
+ * relocated to SRAM, so it can be all in .data section. Otherwise
+ * we need to initialize api_params separately.
+ */
+	.data
 	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
@@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
+	.text
+
 /*
  * ======================
  * == Idle entry point ==
@@ -289,12 +296,6 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]
 
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@@ -302,11 +303,7 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bne	exit_nonoff_modes	@ Return if locked
 	/* wait till dll locks */
-	adr	r7, kick_counter
 wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@@ -330,9 +327,6 @@ kick_dll:
 	orr	r6, r6, #(1<<3)		@ enable dll
 	str	r6, [r4]
 	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed
 
 exit_nonoff_modes:
@@ -360,15 +354,6 @@ sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-
 ENTRY(omap3_do_wfi_sz)
 	.word	. - omap3_do_wfi
 
@@ -437,7 +422,9 @@ ENTRY(omap3_restore)
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
 	bne	logic_l1_restore
 
-	ldr	r0, l2dis_3630
+	adr	r1, l2dis_3630_offset	@ address for offset
+	ldr	r0, [r1]		@ value for offset
+	ldr	r0, [r1, r0]		@ value at l2dis_3630
 	cmp	r0, #0x1	@ should we disable L2 on 3630?
 	bne	skipl2dis
 	mrc	p15, 0, r0, c1, c0, 1
@@ -449,12 +436,14 @@ skipl2dis:
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
+	adr	r0, l2_inv_api_params_offset
+	ldr	r3, [r0]
+	add	r3, r3, r0		@ r3 points to dummy parameters
 	mov	r0, #40			@ set service ID for PPA
 	mov	r12, r0			@ copy secure Service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	dsb				@ data write barrier
 	dmb				@ data memory barrier
 	smc	#1			@ call SMI monitor (smi #1)
@@ -488,8 +477,8 @@ skipl2dis:
 	b	logic_l1_restore
 
 	.align
-l2_inv_api_params:
-	.word	0x1, 0x00
+l2_inv_api_params_offset:
+	.long	l2_inv_api_params - .
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1			@ set up to invalidate L2
@@ -506,7 +495,9 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	ldr	r1, l2dis_3630
+	adr	r0, l2dis_3630_offset	@ adress for offset
+	ldr	r1, [r0]		@ value for offset
+	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
 	bne	skipl2reen
 	mrc	p15, 0, r1, c1, c0, 1
@@ -535,9 +526,17 @@ control_stat:
 	.word	CONTROL_STAT
 control_mem_rta:
 	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630_offset:
+	.long	l2dis_3630 - .
+
+	.data
 l2dis_3630:
 	.word	0
 
+	.data
+l2_inv_api_params:
+	.word	0x1, 0x00
+
 /*
  * Internal functions
  */
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9b09d85d811a..c7a3b4aab4b5 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -29,12 +29,6 @@
 	dsb
 .endm
 
-ppa_zero_params:
-	.word		0x0
-
-ppa_por_params:
-	.word		1, 0
-
 #ifdef CONFIG_ARCH_OMAP4
 
 /*
@@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume)
 	beq	skip_ns_smp_enable
 ppa_actrl_retry:
 	mov     r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
-	adr	r3, ppa_zero_params		@ Pointer to parameters
+	adr	r1, ppa_zero_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_zero_params
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
 	mov	r6, #0xff
@@ -303,7 +299,9 @@ skip_ns_smp_enable:
 	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	adr     r3, ppa_por_params
+	adr     r1, ppa_por_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_por_params
 	str     r4, [r3, #0x04]
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
@@ -328,6 +326,8 @@ skip_l2en:
 #endif
 
 	b	cpu_resume			@ Jump to generic resume
+ppa_por_params_offset:
+	.long	ppa_por_params - .
 ENDPROC(omap4_cpu_resume)
 #endif	/* CONFIG_ARCH_OMAP4 */
 
@@ -380,4 +380,13 @@ ENTRY(omap_do_wfi)
 	nop
 
 	ldmfd	sp!, {pc}
+ppa_zero_params_offset:
+	.long	ppa_zero_params - .
 ENDPROC(omap_do_wfi)
+
+	.data
+ppa_zero_params:
+	.word		0
+
+ppa_por_params:
+	.word		1, 0
diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h
index 2d1d3845253c..364418c78bf3 100644
--- a/arch/arm/mach-omap2/soc.h
+++ b/arch/arm/mach-omap2/soc.h
@@ -129,9 +129,9 @@ int omap_type(void);
 
 /*
  * omap_rev bits:
- * CPU id bits	(0730, 1510, 1710, 2422...)	[31:16]
- * CPU revision	(See _REV_ defined in cpu.h)	[15:08]
- * CPU class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
+ * SoC id bits	(0730, 1510, 1710, 2422...)	[31:16]
+ * SoC revision	(See _REV_ defined in cpu.h)	[15:08]
+ * SoC class bits (15xx, 16xx, 24xx, 34xx...)	[07:00]
  */
 unsigned int omap_rev(void);
 
@@ -141,20 +141,20 @@ static inline int soc_is_omap(void)
 }
 
 /*
- * Get the CPU revision for OMAP devices
+ * Get the SoC revision for OMAP devices
  */
 #define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
 
 /*
  * Macros to group OMAP into cpu classes.
  * These can be used in most places.
- * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
- * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
- * cpu_is_omap243x():	True for OMAP2430
- * cpu_is_omap343x():	True for OMAP3430
- * cpu_is_omap443x():	True for OMAP4430
- * cpu_is_omap446x():	True for OMAP4460
- * cpu_is_omap447x():	True for OMAP4470
+ * soc_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * soc_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * soc_is_omap243x():	True for OMAP2430
+ * soc_is_omap343x():	True for OMAP3430
+ * soc_is_omap443x():	True for OMAP4430
+ * soc_is_omap446x():	True for OMAP4460
+ * soc_is_omap447x():	True for OMAP4470
  * soc_is_omap543x():	True for OMAP5430, OMAP5432
  */
 #define GET_OMAP_CLASS	(omap_rev() & 0xff)
@@ -181,6 +181,14 @@ static inline int is_ti ##class (void)		\
 	return (GET_TI_CLASS == (id)) ? 1 : 0;	\
 }
 
+#define GET_DRA_CLASS	((omap_rev() >> 24) & 0xff)
+
+#define IS_DRA_CLASS(class, id)				\
+static inline int is_dra ##class (void)			\
+{							\
+	return (GET_DRA_CLASS == (id)) ? 1 : 0;		\
+}
+
 #define GET_OMAP_SUBCLASS	((omap_rev() >> 20) & 0x0fff)
 
 #define IS_OMAP_SUBCLASS(subclass, id)			\
@@ -201,6 +209,12 @@ static inline int is_am ##subclass (void)		\
 	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
 }
 
+#define IS_DRA_SUBCLASS(subclass, id)			\
+static inline int is_dra ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
 IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
 IS_OMAP_CLASS(44xx, 0x44)
@@ -210,6 +224,7 @@ IS_AM_CLASS(33xx, 0x33)
 IS_AM_CLASS(43xx, 0x43)
 
 IS_TI_CLASS(81xx, 0x81)
+IS_DRA_CLASS(7xx, 0x7)
 
 IS_OMAP_SUBCLASS(242x, 0x242)
 IS_OMAP_SUBCLASS(243x, 0x243)
@@ -224,24 +239,26 @@ IS_TI_SUBCLASS(816x, 0x816)
 IS_TI_SUBCLASS(814x, 0x814)
 IS_AM_SUBCLASS(335x, 0x335)
 IS_AM_SUBCLASS(437x, 0x437)
-
-#define cpu_is_omap24xx()		0
-#define cpu_is_omap242x()		0
-#define cpu_is_omap243x()		0
-#define cpu_is_omap34xx()		0
-#define cpu_is_omap343x()		0
-#define cpu_is_ti81xx()			0
-#define cpu_is_ti816x()			0
-#define cpu_is_ti814x()			0
+IS_DRA_SUBCLASS(75x, 0x75)
+IS_DRA_SUBCLASS(72x, 0x72)
+
+#define soc_is_omap24xx()		0
+#define soc_is_omap242x()		0
+#define soc_is_omap243x()		0
+#define soc_is_omap34xx()		0
+#define soc_is_omap343x()		0
+#define soc_is_ti81xx()			0
+#define soc_is_ti816x()			0
+#define soc_is_ti814x()			0
 #define soc_is_am35xx()			0
 #define soc_is_am33xx()			0
 #define soc_is_am335x()			0
 #define soc_is_am43xx()			0
 #define soc_is_am437x()			0
-#define cpu_is_omap44xx()		0
-#define cpu_is_omap443x()		0
-#define cpu_is_omap446x()		0
-#define cpu_is_omap447x()		0
+#define soc_is_omap44xx()		0
+#define soc_is_omap443x()		0
+#define soc_is_omap446x()		0
+#define soc_is_omap447x()		0
 #define soc_is_omap54xx()		0
 #define soc_is_omap543x()		0
 #define soc_is_dra7xx()			0
@@ -250,54 +267,54 @@ IS_AM_SUBCLASS(437x, 0x437)
 
 #if defined(MULTI_OMAP2)
 # if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		is_omap24xx()
+#  undef  soc_is_omap24xx
+#  define soc_is_omap24xx()		is_omap24xx()
 # endif
 # if defined (CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		is_omap242x()
+#  undef  soc_is_omap242x
+#  define soc_is_omap242x()		is_omap242x()
 # endif
 # if defined (CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		is_omap243x()
+#  undef  soc_is_omap243x
+#  define soc_is_omap243x()		is_omap243x()
 # endif
 # if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap34xx()		is_omap34xx()
-#  define cpu_is_omap343x()		is_omap343x()
+#  undef  soc_is_omap34xx
+#  undef  soc_is_omap343x
+#  define soc_is_omap34xx()		is_omap34xx()
+#  define soc_is_omap343x()		is_omap343x()
 # endif
 #else
 # if defined(CONFIG_ARCH_OMAP2)
-#  undef  cpu_is_omap24xx
-#  define cpu_is_omap24xx()		1
+#  undef  soc_is_omap24xx
+#  define soc_is_omap24xx()		1
 # endif
 # if defined(CONFIG_SOC_OMAP2420)
-#  undef  cpu_is_omap242x
-#  define cpu_is_omap242x()		1
+#  undef  soc_is_omap242x
+#  define soc_is_omap242x()		1
 # endif
 # if defined(CONFIG_SOC_OMAP2430)
-#  undef  cpu_is_omap243x
-#  define cpu_is_omap243x()		1
+#  undef  soc_is_omap243x
+#  define soc_is_omap243x()		1
 # endif
 # if defined(CONFIG_ARCH_OMAP3)
-#  undef  cpu_is_omap34xx
-#  define cpu_is_omap34xx()		1
+#  undef  soc_is_omap34xx
+#  define soc_is_omap34xx()		1
 # endif
 # if defined(CONFIG_SOC_OMAP3430)
-#  undef  cpu_is_omap343x
-#  define cpu_is_omap343x()		1
+#  undef  soc_is_omap343x
+#  define soc_is_omap343x()		1
 # endif
 #endif
 
 /*
  * Macros to detect individual cpu types.
  * These are only rarely needed.
- * cpu_is_omap2420():	True for OMAP2420
- * cpu_is_omap2422():	True for OMAP2422
- * cpu_is_omap2423():	True for OMAP2423
- * cpu_is_omap2430():	True for OMAP2430
- * cpu_is_omap3430():	True for OMAP3430
+ * soc_is_omap2420():	True for OMAP2420
+ * soc_is_omap2422():	True for OMAP2422
+ * soc_is_omap2423():	True for OMAP2423
+ * soc_is_omap2430():	True for OMAP2430
+ * soc_is_omap3430():	True for OMAP3430
  */
 #define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
@@ -313,51 +330,51 @@ IS_OMAP_TYPE(2423, 0x2423)
 IS_OMAP_TYPE(2430, 0x2430)
 IS_OMAP_TYPE(3430, 0x3430)
 
-#define cpu_is_omap2420()		0
-#define cpu_is_omap2422()		0
-#define cpu_is_omap2423()		0
-#define cpu_is_omap2430()		0
-#define cpu_is_omap3430()		0
-#define cpu_is_omap3630()		0
+#define soc_is_omap2420()		0
+#define soc_is_omap2422()		0
+#define soc_is_omap2423()		0
+#define soc_is_omap2430()		0
+#define soc_is_omap3430()		0
+#define soc_is_omap3630()		0
 #define soc_is_omap5430()		0
 
 /* These are needed for the common code */
 #ifdef CONFIG_ARCH_OMAP2PLUS
-#define cpu_is_omap7xx()		0
-#define cpu_is_omap15xx()		0
-#define cpu_is_omap16xx()		0
-#define cpu_is_omap1510()		0
-#define cpu_is_omap1610()		0
-#define cpu_is_omap1611()		0
-#define cpu_is_omap1621()		0
-#define cpu_is_omap1710()		0
+#define soc_is_omap7xx()		0
+#define soc_is_omap15xx()		0
+#define soc_is_omap16xx()		0
+#define soc_is_omap1510()		0
+#define soc_is_omap1610()		0
+#define soc_is_omap1611()		0
+#define soc_is_omap1621()		0
+#define soc_is_omap1710()		0
 #define cpu_class_is_omap1()		0
 #define cpu_class_is_omap2()		1
 #endif
 
 #if defined(CONFIG_ARCH_OMAP2)
-# undef  cpu_is_omap2420
-# undef  cpu_is_omap2422
-# undef  cpu_is_omap2423
-# undef  cpu_is_omap2430
-# define cpu_is_omap2420()		is_omap2420()
-# define cpu_is_omap2422()		is_omap2422()
-# define cpu_is_omap2423()		is_omap2423()
-# define cpu_is_omap2430()		is_omap2430()
+# undef  soc_is_omap2420
+# undef  soc_is_omap2422
+# undef  soc_is_omap2423
+# undef  soc_is_omap2430
+# define soc_is_omap2420()		is_omap2420()
+# define soc_is_omap2422()		is_omap2422()
+# define soc_is_omap2423()		is_omap2423()
+# define soc_is_omap2430()		is_omap2430()
 #endif
 
 #if defined(CONFIG_ARCH_OMAP3)
-# undef cpu_is_omap3430
-# undef cpu_is_ti81xx
-# undef cpu_is_ti816x
-# undef cpu_is_ti814x
+# undef soc_is_omap3430
+# undef soc_is_ti81xx
+# undef soc_is_ti816x
+# undef soc_is_ti814x
 # undef soc_is_am35xx
-# define cpu_is_omap3430()		is_omap3430()
-# undef cpu_is_omap3630
-# define cpu_is_omap3630()		is_omap363x()
-# define cpu_is_ti81xx()		is_ti81xx()
-# define cpu_is_ti816x()		is_ti816x()
-# define cpu_is_ti814x()		is_ti814x()
+# define soc_is_omap3430()		is_omap3430()
+# undef soc_is_omap3630
+# define soc_is_omap3630()		is_omap363x()
+# define soc_is_ti81xx()		is_ti81xx()
+# define soc_is_ti816x()		is_ti816x()
+# define soc_is_ti814x()		is_ti814x()
 # define soc_is_am35xx()		is_am35xx()
 #endif
 
@@ -376,14 +393,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
-# undef cpu_is_omap44xx
-# undef cpu_is_omap443x
-# undef cpu_is_omap446x
-# undef cpu_is_omap447x
-# define cpu_is_omap44xx()		is_omap44xx()
-# define cpu_is_omap443x()		is_omap443x()
-# define cpu_is_omap446x()		is_omap446x()
-# define cpu_is_omap447x()		is_omap447x()
+# undef soc_is_omap44xx
+# undef soc_is_omap443x
+# undef soc_is_omap446x
+# undef soc_is_omap447x
+# define soc_is_omap44xx()		is_omap44xx()
+# define soc_is_omap443x()		is_omap443x()
+# define soc_is_omap446x()		is_omap446x()
+# define soc_is_omap447x()		is_omap447x()
 # endif
 
 # if defined(CONFIG_SOC_OMAP5)
@@ -397,9 +414,9 @@ IS_OMAP_TYPE(3430, 0x3430)
 #undef soc_is_dra7xx
 #undef soc_is_dra74x
 #undef soc_is_dra72x
-#define soc_is_dra7xx()	(of_machine_is_compatible("ti,dra7"))
-#define soc_is_dra74x()	(of_machine_is_compatible("ti,dra74"))
-#define soc_is_dra72x()	(of_machine_is_compatible("ti,dra72"))
+#define soc_is_dra7xx()	is_dra7xx()
+#define soc_is_dra74x()	is_dra75x()
+#define soc_is_dra72x()	is_dra72x()
 #endif
 
 /* Various silicon revisions for omap2 */
@@ -472,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define DRA752_REV_ES2_0	(DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
+#define DRA722_REV_ES2_0	(DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);
@@ -556,5 +574,22 @@ level(__##fn);
 #define omap_late_initcall(fn)		omap_initcall(late_initcall, fn)
 #define omap_late_initcall_sync(fn)	omap_initcall(late_initcall_sync, fn)
 
-#endif	/* __ASSEMBLY__ */
+/* Legacy defines, these can be removed when users are removed */
+#define cpu_is_omap2420()	soc_is_omap2420()
+#define cpu_is_omap2422()	soc_is_omap2422()
+#define cpu_is_omap242x()	soc_is_omap242x()
+#define cpu_is_omap2430()	soc_is_omap2430()
+#define cpu_is_omap243x()	soc_is_omap243x()
+#define cpu_is_omap24xx()	soc_is_omap24xx()
+#define cpu_is_omap3430()	soc_is_omap3430()
+#define cpu_is_omap343x()	soc_is_omap343x()
+#define cpu_is_omap34xx()	soc_is_omap34xx()
+#define cpu_is_omap3630()	soc_is_omap3630()
+#define cpu_is_omap443x()	soc_is_omap443x()
+#define cpu_is_omap446x()	soc_is_omap446x()
+#define cpu_is_omap44xx()	soc_is_omap44xx()
+#define cpu_is_ti814x()		soc_is_ti814x()
+#define cpu_is_ti816x()		soc_is_ti816x()
+#define cpu_is_ti81xx()		soc_is_ti81xx()
 
+#endif	/* __ASSEMBLY__ */
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index cd488b80ba36..83d0e61f49e6 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -211,35 +211,10 @@ static inline int omap243x_sram_init(void)
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap3_sram_configure_core_dpll)(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
-	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(
-			m2, unlock_dll, f, inc,
-			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
-			sdrc_actim_ctrl_b_0, sdrc_mr_0,
-			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
-			sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
 void omap3_sram_restore_context(void)
 {
 	omap_sram_reset();
 
-	_omap3_sram_configure_core_dpll =
-		omap_sram_push(omap3_sram_configure_core_dpll,
-			       omap3_sram_configure_core_dpll_sz);
 	omap_push_sram_idle();
 }
 
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
index 948d3edefc38..18dc884267fa 100644
--- a/arch/arm/mach-omap2/sram.h
+++ b/arch/arm/mach-omap2/sram.h
@@ -15,12 +15,6 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
-extern u32 omap3_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern void omap3_sram_restore_context(void);
 
 /* Do not use these */
@@ -52,14 +46,6 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
-extern u32 omap3_sram_configure_core_dpll(
-			u32 m2, u32 unlock_dll, u32 f, u32 inc,
-			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
-			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
-			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
-			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
 #ifdef CONFIG_PM
 extern void omap_push_sram_idle(void);
 #else
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
deleted file mode 100644
index 1446331b576a..000000000000
--- a/arch/arm/mach-omap2/sram34xx.S
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * linux/arch/arm/mach-omap3/sram.S
- *
- * Omap3 specific functions that need to be run in internal SRAM
- *
- * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
- *
- * Rajendra Nayak <rnayak@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "sdrc.h"
-#include "cm3xxx.h"
-
-/*
- * This file needs be built unconditionally as ARM to interoperate correctly
- * with non-Thumb-2-capable firmware.
- */
-	.arm
-
-	.text
-
-/* r1 parameters */
-#define SDRC_NO_UNLOCK_DLL		0x0
-#define SDRC_UNLOCK_DLL			0x1
-
-/* SDRC_DLLA_CTRL bit settings */
-#define FIXEDDELAY_SHIFT		24
-#define FIXEDDELAY_MASK			(0xff << FIXEDDELAY_SHIFT)
-#define DLLIDLE_MASK			0x4
-
-/*
- * SDRC_DLLA_CTRL default values: TI hardware team indicates that
- * FIXEDDELAY should be initialized to 0xf.  This apparently was
- * empirically determined during process testing, so no derivation
- * was provided.
- */
-#define FIXEDDELAY_DEFAULT		(0x0f << FIXEDDELAY_SHIFT)
-
-/* SDRC_DLLA_STATUS bit settings */
-#define LOCKSTATUS_MASK			0x4
-
-/* SDRC_POWER bit settings */
-#define SRFRONIDLEREQ_MASK		0x40
-
-/* CM_IDLEST1_CORE bit settings */
-#define ST_SDRC_MASK			0x2
-
-/* CM_ICLKEN1_CORE bit settings */
-#define EN_SDRC_MASK			0x2
-
-/* CM_CLKSEL1_PLL bit settings */
-#define CORE_DPLL_CLKOUT_DIV_SHIFT	0x1b
-
-/*
- * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- *
- * Params passed in registers:
- *  r0 = new M2 divider setting (only 1 and 2 supported right now)
- *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
- *      SDRC rates < 83MHz
- *  r2 = number of MPU cycles to wait for SDRC to stabilize after
- *      reprogramming the SDRC when switching to a slower MPU speed
- *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
- *
- * Params passed via the stack. The needed params will be copied in SRAM
- *  before use by the code in SRAM (SDRAM is not accessible during SDRC
- *  reconfiguration):
- *  new SDRC_RFR_CTRL_0 register contents
- *  new SDRC_ACTIM_CTRL_A_0 register contents
- *  new SDRC_ACTIM_CTRL_B_0 register contents
- *  new SDRC_MR_0 register value
- *  new SDRC_RFR_CTRL_1 register contents
- *  new SDRC_ACTIM_CTRL_A_1 register contents
- *  new SDRC_ACTIM_CTRL_B_1 register contents
- *  new SDRC_MR_1 register value
- *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
- * the SDRC CS1 registers
- *
- * NOTE: This code no longer attempts to program the SDRC AC timing and MR
- * registers.  This is because the code currently cannot ensure that all
- * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
- * SDRAM when the registers are written.  If the registers are changed while
- * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
- * may enter an unpredictable state.  In the future, the intent is to
- * re-enable this code in cases where we can ensure that no initiators are
- * touching the SDRAM.  Until that time, users who know that their use case
- * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
- * option.
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible.  Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
-	.align	3
-ENTRY(omap3_sram_configure_core_dpll)
-	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
-
-					@ pull the extra args off the stack
-					@  and store them in SRAM
-
-/*
- * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
- * in Thumb-2: use a r7 as a base instead.
- * Be careful not to clobber r7 when maintaing this file.
- */
- THUMB(	adr	r7, omap3_sram_configure_core_dpll			)
-	.macro strtext Rt:req, label:req
- ARM(	str	\Rt, \label						)
- THUMB(	str	\Rt, [r7, \label - omap3_sram_configure_core_dpll]	)
-	.endm
-
-	ldr	r4, [sp, #52]
-	strtext	r4, omap_sdrc_rfr_ctrl_0_val
-	ldr	r4, [sp, #56]
-	strtext	r4, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r4, [sp, #60]
-	strtext	r4, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r4, [sp, #64]
-	strtext	r4, omap_sdrc_mr_0_val
-	ldr	r4, [sp, #68]
-	strtext	r4, omap_sdrc_rfr_ctrl_1_val
-	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_params		@  do not use cs1 params
-	ldr	r4, [sp, #72]
-	strtext	r4, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r4, [sp, #76]
-	strtext	r4, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r4, [sp, #80]
-	strtext	r4, omap_sdrc_mr_1_val
-skip_cs1_params:
-	mrc	p15, 0, r8, c1, c0, 0	@ read ctrl register
-	bic	r10, r8, #0x800		@ clear Z-bit, disable branch prediction
-	mcr	p15, 0, r10, c1, c0, 0	@ write ctrl register
-	dsb				@ flush buffered writes to interconnect
-	isb				@ prevent speculative exec past here
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
-	bleq	unlock_dll
-	blne	lock_dll
-	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
-	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
-	mov	r12, r2
-	bl	wait_clk_stable		@ wait for SDRC to stabilize
-	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
-	bleq	wait_dll_unlock
-	blne	wait_dll_lock
-	cmp	r3, #1			@ if increasing SDRC clk rate,
-	beq	return_to_sdram		@ return to SDRAM code, otherwise,
-	bl	configure_sdrc		@ reprogram SDRC regs now
-return_to_sdram:
-	mcr	p15, 0, r8, c1, c0, 0	@ restore ctrl register
-	isb				@ prevent speculative exec past here
-	mov 	r0, #0 			@ return value
-	ldmfd	sp!, {r1-r12, pc}	@ restore regs and return
-unlock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #FIXEDDELAY_MASK
-	orr	r12, r12, #FIXEDDELAY_DEFAULT
-	orr	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-lock_dll:
-	ldr	r11, omap3_sdrc_dlla_ctrl
-	ldr	r12, [r11]
-	bic	r12, r12, #DLLIDLE_MASK
-	str	r12, [r11]		@ (no OCP barrier needed)
-	bx	lr
-sdram_in_selfrefresh:
-	ldr	r11, omap3_sdrc_power	@ read the SDRC_POWER register
-	ldr	r12, [r11]		@ read the contents of SDRC_POWER
-	mov	r9, r12			@ keep a copy of SDRC_POWER bits
-	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
-	str 	r12, [r11]		@ write back to SDRC_POWER register
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-idle_sdrc:
-	ldr	r11, omap3_cm_iclken1_core	@ read the CM_ICLKEN1_CORE reg
-	ldr	r12, [r11]
-	bic	r12, r12, #EN_SDRC_MASK		@ disable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr 	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK		@ check for SDRC idle
-	cmp 	r12, #ST_SDRC_MASK
-	bne 	wait_sdrc_idle
-	bx 	lr
-configure_core_dpll:
-	ldr 	r11, omap3_cm_clksel1_pll
-	ldr	r12, [r11]
-	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
-	and	r12, r12, r10
-	orr	r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
-	str	r12, [r11]
-	ldr	r12, [r11]		@ posted-write barrier for CM
-	bx	lr
-wait_clk_stable:
-	subs 	r12, r12, #1
-	bne	wait_clk_stable
-	bx	lr
-enable_sdrc:
-	ldr 	r11, omap3_cm_iclken1_core
-	ldr	r12, [r11]
-	orr 	r12, r12, #EN_SDRC_MASK		@ enable iclk bit for SDRC
-	str 	r12, [r11]
-wait_sdrc_idle1:
-	ldr 	r11, omap3_cm_idlest1_core
-	ldr	r12, [r11]
-	and 	r12, r12, #ST_SDRC_MASK
-	cmp	r12, #0
-	bne	wait_sdrc_idle1
-restore_sdrc_power_val:
-	ldr	r11, omap3_sdrc_power
-	str	r9, [r11]		@ restore SDRC_POWER, no barrier needed
-	bx	lr
-wait_dll_lock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and 	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #LOCKSTATUS_MASK
-	bne	wait_dll_lock
-	bx	lr
-wait_dll_unlock:
-	ldr	r11, omap3_sdrc_dlla_status
-	ldr	r12, [r11]
-	and	r12, r12, #LOCKSTATUS_MASK
-	cmp	r12, #0x0
-	bne	wait_dll_unlock
-	bx	lr
-configure_sdrc:
-	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
-	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
-	str	r12, [r11]			@ store
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_0_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_0
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_0_val
-	ldr	r11, omap3_sdrc_mr_0
-	str	r12, [r11]
-#endif
-	ldr	r12, omap_sdrc_rfr_ctrl_1_val
-	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
-	beq	skip_cs1_prog		@  do not program cs1 params
-	ldr	r11, omap3_sdrc_rfr_ctrl_1
-	str	r12, [r11]
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
-	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_a_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_actim_ctrl_b_1_val
-	ldr	r11, omap3_sdrc_actim_ctrl_b_1
-	str	r12, [r11]
-	ldr	r12, omap_sdrc_mr_1_val
-	ldr	r11, omap3_sdrc_mr_1
-	str	r12, [r11]
-#endif
-skip_cs1_prog:
-	ldr	r12, [r11]		@ posted-write barrier for SDRC
-	bx	lr
-
-	.align
-omap3_sdrc_power:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
-omap3_cm_clksel1_pll:
-	.word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap3_cm_idlest1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
-omap3_cm_iclken1_core:
-	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-
-omap3_sdrc_rfr_ctrl_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_rfr_ctrl_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
-omap3_sdrc_actim_ctrl_a_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrl_a_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
-omap3_sdrc_actim_ctrl_b_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
-omap3_sdrc_actim_ctrl_b_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
-omap3_sdrc_mr_0:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
-omap3_sdrc_mr_1:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
-omap_sdrc_rfr_ctrl_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_rfr_ctrl_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_1_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_0_val:
-	.word 0xDEADBEEF
-omap_sdrc_mr_1_val:
-	.word 0xDEADBEEF
-
-omap3_sdrc_dlla_status:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
-omap3_sdrc_dlla_ctrl:
-	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
-core_m2_mask_val:
-	.word 0x07FFFFFF
-ENDPROC(omap3_sram_configure_core_dpll)
-
-ENTRY(omap3_sram_configure_core_dpll_sz)
-	.word	. - omap3_sram_configure_core_dpll
-
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index bef41837bf7f..5b385bb8aff9 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -183,7 +183,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
 				  of_get_property(np, "ti,timer-secure", NULL)))
 			continue;
 
-		of_add_property(np, &device_disabled);
+		if (!of_device_is_compatible(np, "ti,omap-counter32k"))
+			of_add_property(np, &device_disabled);
 		return np;
 	}
 
@@ -193,8 +194,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
 /**
  * omap_dmtimer_init - initialisation function when device tree is used
  *
- * For secure OMAP3 devices, timers with device type "timer-secure" cannot
- * be used by the kernel as they are reserved. Therefore, to prevent the
+ * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure"
+ * cannot be used by the kernel as they are reserved. Therefore, to prevent the
  * kernel registering these devices remove them dynamically from the device
  * tree on boot.
  */
@@ -202,7 +203,7 @@ static void __init omap_dmtimer_init(void)
 {
 	struct device_node *np;
 
-	if (!cpu_is_omap34xx())
+	if (!cpu_is_omap34xx() && !soc_is_dra7xx())
 		return;
 
 	/* If we are a secure device, remove any secure timer nodes */
@@ -319,6 +320,12 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
 	return r;
 }
 
+#if !defined(CONFIG_SMP) && defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
+void tick_broadcast(const struct cpumask *mask)
+{
+}
+#endif
+
 static void __init omap2_gp_clockevent_init(int gptimer_id,
 						const char *fck_source,
 						const char *property)
@@ -394,7 +401,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 	int ret;
 	struct device_node *np = NULL;
 	struct omap_hwmod *oh;
-	void __iomem *vbase;
 	const char *oh_name = "counter_32k";
 
 	/*
@@ -420,18 +426,6 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 
 	omap_hwmod_setup_one(oh_name);
 
-	if (np) {
-		vbase = of_iomap(np, 0);
-		of_node_put(np);
-	} else {
-		vbase = omap_hwmod_get_mpu_rt_va(oh);
-	}
-
-	if (!vbase) {
-		pr_warn("%s: failed to get counter_32k resource\n", __func__);
-		return -ENXIO;
-	}
-
 	ret = omap_hwmod_enable(oh);
 	if (ret) {
 		pr_warn("%s: failed to enable counter_32k module (%d)\n",
@@ -439,13 +433,18 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
 		return ret;
 	}
 
-	ret = omap_init_clocksource_32k(vbase);
-	if (ret) {
-		pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
-							__func__, ret);
-		omap_hwmod_idle(oh);
-	}
+	if (!of_have_populated_dt()) {
+		void __iomem *vbase;
+
+		vbase = omap_hwmod_get_mpu_rt_va(oh);
 
+		ret = omap_init_clocksource_32k(vbase);
+		if (ret) {
+			pr_warn("%s: failed to initialize counter_32k as a clocksource (%d)\n",
+					__func__, ret);
+			omap_hwmod_idle(oh);
+		}
+	}
 	return ret;
 }
 
@@ -476,7 +475,64 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 			clocksource_gpt.name, clksrc.rate);
 }
 
-#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
+static void __init __omap_sync32k_timer_init(int clkev_nr, const char *clkev_src,
+		const char *clkev_prop, int clksrc_nr, const char *clksrc_src,
+		const char *clksrc_prop, bool gptimer)
+{
+	omap_clk_init();
+	omap_dmtimer_init();
+	omap2_gp_clockevent_init(clkev_nr, clkev_src, clkev_prop);
+
+	/* Enable the use of clocksource="gp_timer" kernel parameter */
+	if (use_gptimer_clksrc || gptimer)
+		omap2_gptimer_clocksource_init(clksrc_nr, clksrc_src,
+						clksrc_prop);
+	else
+		omap2_sync32k_clocksource_init();
+}
+
+void __init omap_init_time(void)
+{
+	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
+			2, "timer_sys_ck", NULL, false);
+
+	if (of_have_populated_dt())
+		clocksource_probe();
+}
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
+void __init omap3_secure_sync32k_timer_init(void)
+{
+	__omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
+			2, "timer_sys_ck", NULL, false);
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+void __init omap3_gptimer_timer_init(void)
+{
+	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
+			1, "timer_sys_ck", "ti,timer-alwon", true);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) ||		\
+	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
+static void __init omap4_sync32k_timer_init(void)
+{
+	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
+			2, "sys_clkin_ck", NULL, false);
+}
+
+void __init omap4_local_timer_init(void)
+{
+	omap4_sync32k_timer_init();
+	clocksource_probe();
+}
+#endif
+
+#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+
 /*
  * The realtime counter also called master counter, is a free-running
  * counter, which is related to real time. It produces the count used
@@ -488,6 +544,7 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
  */
 static void __init realtime_counter_init(void)
 {
+#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
 	void __iomem *base;
 	static struct clk *sys_clk;
 	unsigned long rate;
@@ -586,78 +643,9 @@ sysclk1_based:
 	set_cntfreq();
 
 	iounmap(base);
-}
-#else
-static inline void __init realtime_counter_init(void)
-{}
 #endif
-
-#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
-			       clksrc_nr, clksrc_src, clksrc_prop)	\
-void __init omap##name##_gptimer_timer_init(void)			\
-{									\
-	omap_clk_init();					\
-	omap_dmtimer_init();						\
-	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
-	omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,		\
-					clksrc_prop);			\
-}
-
-#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,	\
-				clksrc_nr, clksrc_src, clksrc_prop)	\
-void __init omap##name##_sync32k_timer_init(void)		\
-{									\
-	omap_clk_init();					\
-	omap_dmtimer_init();						\
-	omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);	\
-	/* Enable the use of clocksource="gp_timer" kernel parameter */	\
-	if (use_gptimer_clksrc)						\
-		omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src,	\
-						clksrc_prop);		\
-	else								\
-		omap2_sync32k_clocksource_init();			\
 }
 
-#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
-			2, "timer_sys_ck", NULL);
-#endif /* CONFIG_ARCH_OMAP2 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
-OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
-			2, "timer_sys_ck", NULL);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
-			2, "timer_sys_ck", NULL);
-#endif /* CONFIG_ARCH_OMAP3 */
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
-	defined(CONFIG_SOC_AM43XX)
-OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
-		       1, "timer_sys_ck", "ti,timer-alwon");
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
-	defined(CONFIG_SOC_DRA7XX)
-static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
-			       2, "sys_clkin_ck", NULL);
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-#ifdef CONFIG_HAVE_ARM_TWD
-void __init omap4_local_timer_init(void)
-{
-	omap4_sync32k_timer_init();
-	clocksource_probe();
-}
-#else
-void __init omap4_local_timer_init(void)
-{
-	omap4_sync32k_timer_init();
-}
-#endif /* CONFIG_HAVE_ARM_TWD */
-#endif /* CONFIG_ARCH_OMAP4 */
-
-#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
 void __init omap5_realtime_timer_init(void)
 {
 	omap4_sync32k_timer_init();
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index d44d311704ba..2028167fff31 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -280,10 +280,6 @@ void omap3_vc_set_pmic_signaling(int core_next_state)
 	}
 }
 
-#define PRM_POLCTRL_TWL_MASK	(OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
-					OMAP3430_PRM_POLCTRL_CLKREQ_POL)
-#define PRM_POLCTRL_TWL_VAL	OMAP3430_PRM_POLCTRL_CLKREQ_POL
-
 /*
  * Configure signal polarity for sys_clkreq and sys_off_mode pins
  * as the default values are wrong and can cause the system to hang
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 08d2be2ea41f..a2af15822fcb 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,6 +1,18 @@
-if ARCH_ORION5X
+menuconfig ARCH_ORION5X
+	bool "Marvell Orion"
+	depends on MMU && ARCH_MULTI_V5
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
+	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
+	select PCI
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell Orion 5x series SoCs:
+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+	  Orion-2 (5281), Orion-1-90 (6183).
 
-menu "Orion Implementations"
+if ARCH_ORION5X
 
 config ARCH_ORION5X_DT
 	bool "Marvell Orion5x Flattened Device Tree"
@@ -16,14 +28,14 @@ config ARCH_ORION5X_DT
 
 config MACH_DB88F5281
 	bool "Marvell Orion-2 Development Board"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-2 (88F5281) Development Board
 
 config MACH_RD88F5182
 	bool "Marvell Orion-NAS Reference Design"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-NAS (88F5182) RD2
@@ -31,27 +43,29 @@ config MACH_RD88F5182
 config MACH_RD88F5182_DT
 	bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
 	select ARCH_ORION5X_DT
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the Marvell
 	  Orion-NAS (88F5182) RD2, Flattened Device Tree.
 
 config MACH_KUROBOX_PRO
 	bool "KuroBox Pro"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  KuroBox Pro platform.
 
 config MACH_DNS323
 	bool "D-Link DNS-323"
-	select I2C_BOARDINFO
+	select GENERIC_NET_UTILS
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  D-Link DNS-323 platform.
 
 config MACH_TS209
 	bool "QNAP TS-109/TS-209"
+	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
@@ -64,7 +78,7 @@ config MACH_TERASTATION_PRO2
 
 config MACH_LINKSTATION_PRO
 	bool "Buffalo Linkstation Pro/Live"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Pro/Live platform. Both v1 and
@@ -72,7 +86,7 @@ config MACH_LINKSTATION_PRO
 
 config MACH_LINKSTATION_LSCHL
 	bool "Buffalo Linkstation Live v3 (LS-CHL)"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation Live v3 (LS-CHL) platform.
@@ -86,13 +100,14 @@ config MACH_LINKSTATION_MINI
 
 config MACH_LINKSTATION_LS_HGL
 	bool "Buffalo Linkstation LS-HGL"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo Linkstation LS-HGL platform.
 
 config MACH_TS409
 	bool "QNAP TS-409"
+	select GENERIC_NET_UTILS
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-409 platform.
@@ -124,7 +139,7 @@ config MACH_D2NET_DT
 
 config MACH_NET2BIG
 	bool "LaCie 2Big Network"
-	select I2C_BOARDINFO
+	select I2C_BOARDINFO if I2C
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie 2Big Network NAS.
@@ -160,6 +175,4 @@ config MACH_RD88F6183AP_GE
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-1-90 (88F6183) AP GE RD.
 
-endmenu
-
 endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index a1e0fbe6a7a1..4b2502b4ca0d 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o pci.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot
deleted file mode 100644
index 760a0efe7580..000000000000
--- a/arch/arm/mach-orion5x/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
index 8a7284124153..a89376a5cd92 100644
--- a/arch/arm/mach-orion5x/board-d2net.c
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -20,9 +20,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * LaCie d2 Network Info
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index d0871786dd8a..6f4c2c4ae2a5 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -20,10 +20,10 @@
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include <plat/time.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index 66f9c3ba86cc..79202fd626df 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -17,8 +17,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 /*****************************************************************************
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
index 270824b0e50f..b7b0f52f4c0a 100644
--- a/arch/arm/mach-orion5x/board-rd88f5182.c
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -18,8 +18,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5182 Info
diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/bridge-regs.h
index 5766e3fbff69..305598eaaee1 100644
--- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h
+++ b/arch/arm/mach-orion5x/bridge-regs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/bridge-regs.h
- *
  * Orion CPU Bridge Registers
  *
  * This file is licensed under the terms of the GNU General Public
@@ -11,7 +9,7 @@
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
 
-#include <mach/orion5x.h>
+#include "orion5x.h"
 
 #define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE + 0x100)
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 6bbb7b55c6d1..70c3366c8d03 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -27,14 +27,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
+
+#include "bridge-regs.h"
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * I/O Address Mapping
@@ -184,9 +184,21 @@ static void __init orion5x_crypto_init(void)
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
 static void __init orion5x_wdt_init(void)
 {
-	orion_wdt_init();
+	platform_device_register(&orion_wdt_device);
 }
 
 
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index dc01c4ffc9a8..12f74b46e2ff 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -23,10 +23,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * DB-88F5281 on board devices
@@ -369,6 +369,7 @@ static void __init db88f5281_init(void)
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index f267e58a8283..cd483bfb5ca8 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -33,8 +33,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <asm/system_info.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -173,42 +173,10 @@ static struct mv643xx_eth_platform_data dns323_eth_data = {
 	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
 };
 
-/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
- * functions be kept somewhere?
- */
-static int __init dns323_parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init dns323_parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = dns323_parse_hex_nibble(b[0]);
-	lo = dns323_parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
 static int __init dns323_read_mac_addr(void)
 {
 	u_int8_t addr[6];
-	int i;
-	char *mac_page;
+	void __iomem *mac_page;
 
 	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
 	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
@@ -217,23 +185,8 @@ static int __init dns323_read_mac_addr(void)
 	if (!mac_page)
 		return -ENOMEM;
 
-	/* Sanity check the string we're looking at */
-	for (i = 0; i < 5; i++) {
-		if (*(mac_page + (i * 3) + 2) != ':') {
-			goto error_fail;
-		}
-	}
-
-	for (i = 0; i < 6; i++)	{
-		int byte;
-
-		byte = dns323_parse_hex_byte(mac_page + (i * 3));
-		if (byte < 0) {
-			goto error_fail;
-		}
-
-		addr[i] = byte;
-	}
+	if (!mac_pton((__force const char *) mac_page, addr))
+		goto error_fail;
 
 	iounmap(mac_page);
 	printk("DNS-323: Found ethernet MAC address: %pM\n", addr);
@@ -713,6 +666,7 @@ static void __init dns323_init(void)
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
deleted file mode 100644
index 79eb502a1e64..000000000000
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MAIN_IRQ_CAUSE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #0]		@ main cause
-	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
-	mov	\irqnr, #0			@ default irqnr
-	@ find cause bits that are unmasked
-	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
-	clzne	\irqnr,	\irqstat		@ calc irqnr
-	rsbne	\irqnr, \irqnr, #31
-	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
deleted file mode 100644
index 395735482473..000000000000
--- a/arch/arm/mach-orion5x/include/mach/hardware.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#endif
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
deleted file mode 100644
index abd26b542c3c..000000000000
--- a/arch/arm/mach-orion5x/include/mach/uncompress.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/orion5x.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 086ecb87d885..de980ef9cda1 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -13,10 +13,10 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
 #include <asm/exception.h>
+#include "bridge-regs.h"
 #include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
@@ -26,14 +26,6 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_ORION5X_GPIO_24_31,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
 asmlinkage void
 __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
 {
@@ -47,15 +39,12 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init orion5x_init_irq(void)
 {
 	orion_irq_init(1, MAIN_IRQ_MASK);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(orion5x_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/irqs.h
index 2431d9923427..506c8e0b30c4 100644
--- a/arch/arm/mach-orion5x/include/mach/irqs.h
+++ b/arch/arm/mach-orion5x/irqs.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/irqs.h
- *
  * IRQ definitions for Orion SoC
  *
  *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
@@ -54,7 +52,7 @@
 #define IRQ_ORION5X_GPIO_START	33
 #define NR_GPIO_IRQS		32
 
-#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+#define ORION5X_NR_IRQS		(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
 
 
 #endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index fe6a48a325e8..9dc3f59bed9c 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -23,10 +23,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * KUROBOX-PRO Info
@@ -383,6 +383,7 @@ static void __init kurobox_pro_init(void)
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
@@ -397,6 +398,7 @@ MACHINE_END
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 028ea038d404..dfdaa8a498a4 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -22,9 +22,9 @@
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Linkstation LS-CHL Info
@@ -320,6 +320,7 @@ static void __init lschl_init(void)
 MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
 	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= lschl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 32b7129b767d..47ba6e0502f5 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -21,9 +21,9 @@
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Linkstation LS-HGL Info
@@ -267,6 +267,7 @@ static void __init ls_hgl_init(void)
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index 5b70026f478c..19ef18594415 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
 #include <plat/mpp.h>
+#include "orion5x.h"
 #include "mpp.h"
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index e032f01da49e..2bf8ec75e908 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -21,9 +21,9 @@
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 #define MV2120_NOR_BOOT_BASE	0xf4000000
 #define MV2120_NOR_BOOT_SIZE	SZ_512K
@@ -232,6 +232,7 @@ static void __init mv2120_init(void)
 MACHINE_START(MV2120, "HP Media Vault mv2120")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index ba73dc7ffb9e..bf6be4cfd238 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -24,10 +24,10 @@
 #include <linux/delay.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * LaCie 2Big Network Info
@@ -423,6 +423,7 @@ static void __init net2big_init(void)
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/orion5x.h
index b78ff3248868..3364df331f01 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/orion5x.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/orion5x.h
- *
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
  *
@@ -14,6 +12,8 @@
 #ifndef __ASM_ARCH_ORION5X_H
 #define __ASM_ARCH_ORION5X_H
 
+#include "irqs.h"
+
 /*****************************************************************************
  * Orion Address Maps
  *
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index b02f3947be51..ecb998e7f8dc 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -19,8 +19,8 @@
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
 #include <plat/addr-map.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Orion has one PCIe controller and one PCI controller.
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 213b3e143c57..c742e7b40b0d 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -20,9 +20,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5181L FXO Info
@@ -169,6 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 594800e1d691..7e977b794b0c 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -21,9 +21,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5181L GE Info
@@ -181,6 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init);
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index b576ef5f18a1..fe3e67c81fb8 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -23,9 +23,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5182 Info
@@ -281,6 +281,7 @@ static void __init rd88f5182_init(void)
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 78a1e6ab1b9d..4bf80dd5478c 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -22,8 +22,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
 	.phy_addr	= -1,
@@ -119,6 +119,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 12086745c9fd..deb5e29ac669 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -22,9 +22,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Terastation Pro 2/Live Info
@@ -359,6 +359,7 @@ static void __init tsp2_init(void)
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index c725b7cb9875..7bd671b2854c 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -25,9 +25,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "tsx09-common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
@@ -324,6 +324,7 @@ static void __init qnap_ts209_init(void)
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index cf2ab531cabc..a77613b14db5 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -27,9 +27,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "tsx09-common.h"
 
 /*****************************************************************************
@@ -313,6 +313,7 @@ static void __init qnap_ts409_init(void)
 MACHINE_START(TS409, "QNAP TS-409")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 1b704d35cf5b..3a58a5d4a28a 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -23,9 +23,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "ts78xx-fpga.h"
 
 /*****************************************************************************
@@ -176,7 +176,7 @@ static void ts78xx_ts_rtc_unload(void)
 static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 			unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		unsigned char bits;
@@ -200,7 +200,7 @@ static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
 static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
 			const uint8_t *buf, int len)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	void __iomem *io_base = chip->IO_ADDR_W;
 	unsigned long off = ((unsigned long)buf & 3);
 	int sz;
@@ -227,7 +227,7 @@ static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
 static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
 			uint8_t *buf, int len)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	void __iomem *io_base = chip->IO_ADDR_R;
 	unsigned long off = ((unsigned long)buf & 3);
 	int sz;
@@ -615,6 +615,7 @@ static void __init ts78xx_init(void)
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
index 24b2959719fa..89774985d380 100644
--- a/arch/arm/mach-orion5x/tsx09-common.c
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -15,7 +15,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/timex.h>
 #include <linux/serial_reg.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "tsx09-common.h"
 #include "common.h"
 
@@ -53,53 +53,12 @@ struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static int __init qnap_tsx09_parse_hex_nibble(char n)
-{
-	if (n >= '0' && n <= '9')
-		return n - '0';
-
-	if (n >= 'A' && n <= 'F')
-		return n - 'A' + 10;
-
-	if (n >= 'a' && n <= 'f')
-		return n - 'a' + 10;
-
-	return -1;
-}
-
-static int __init qnap_tsx09_parse_hex_byte(const char *b)
-{
-	int hi;
-	int lo;
-
-	hi = qnap_tsx09_parse_hex_nibble(b[0]);
-	lo = qnap_tsx09_parse_hex_nibble(b[1]);
-
-	if (hi < 0 || lo < 0)
-		return -1;
-
-	return (hi << 4) | lo;
-}
-
 static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
 {
 	u_int8_t addr[6];
-	int i;
 
-	for (i = 0; i < 6; i++) {
-		int byte;
-
-		/*
-		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
-		 */
-		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
-			return -1;
-
-		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
-		if (byte < 0)
-			return -1;
-		addr[i] = byte;
-	}
+	if (!mac_pton(addr_str, addr))
+		return -1;
 
 	printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
 
@@ -118,12 +77,12 @@ void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
 	unsigned long addr;
 
 	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
-		char *nor_page;
+		void __iomem *nor_page;
 		int ret = 0;
 
 		nor_page = ioremap(addr, 1024);
 		if (nor_page != NULL) {
-			ret = qnap_tsx09_check_mac_addr(nor_page);
+			ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
 			iounmap(nor_page);
 		}
 
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 80a56ee245b3..4e1e5c8f6111 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -174,6 +174,7 @@ subsys_initcall(wnr854t_pci_init);
 MACHINE_START(WNR854T, "Netgear WNR854T")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 670e30dc0d1b..61e9027ef224 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -262,6 +262,7 @@ subsys_initcall(wrt350n_v2_pci_init);
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index 62240f69b4ee..aef92ba0eacd 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_PICOXCELL
-	bool "Picochip PicoXcell" if ARCH_MULTI_V6
+	bool "Picochip PicoXcell"
+	depends on ARCH_MULTI_V6
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select DW_APB_TIMER_OF
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 9ab8932403e5..0cf4426183cf 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,6 +1,8 @@
 menuconfig ARCH_SIRF
-	bool "CSR SiRF" if ARCH_MULTI_V7
+	bool "CSR SiRF"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_RESET_CONTROLLER
+	select RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT_MAP
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
deleted file mode 100644
index c77a4883a4ee..000000000000
--- a/arch/arm/mach-prima2/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y		+= 0x00008000
-params_phys-y		:= 0x00000100
-initrd_phys-y		:= 0x00800000
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 3916a6665100..6d77b622d168 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -15,7 +15,7 @@
 #include <asm/mach/time.h>
 #include <asm/exception.h>
 
-extern struct smp_operations   sirfsoc_smp_ops;
+extern const struct smp_operations sirfsoc_smp_ops;
 extern void sirfsoc_secondary_startup(void);
 extern void sirfsoc_cpu_die(unsigned int cpu);
 
diff --git a/arch/arm/mach-prima2/hotplug.c b/arch/arm/mach-prima2/hotplug.c
index 0ab2f8bae28e..a728c78b996f 100644
--- a/arch/arm/mach-prima2/hotplug.c
+++ b/arch/arm/mach-prima2/hotplug.c
@@ -32,7 +32,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
  *
  * Called with IRQs disabled
  */
-void __ref sirfsoc_cpu_die(unsigned int cpu)
+void sirfsoc_cpu_die(unsigned int cpu)
 {
 	platform_do_lowpower(cpu);
 }
diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
index e46c91094dde..0875b99add18 100644
--- a/arch/arm/mach-prima2/platsmp.c
+++ b/arch/arm/mach-prima2/platsmp.c
@@ -112,7 +112,7 @@ static int sirfsoc_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return pen_release != -1 ? -ENOSYS : 0;
 }
 
-struct smp_operations sirfsoc_smp_ops __initdata = {
+const struct smp_operations sirfsoc_smp_ops __initconst = {
 	.smp_secondary_init     = sirfsoc_secondary_init,
 	.smp_boot_secondary     = sirfsoc_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f09683687963..7ee4652b4c61 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -297,7 +297,6 @@ config MACH_MAGICIAN
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
-	select GPIO_SYSFS
 	select IWMMXT
 	select PXA27x
 	help
@@ -529,7 +528,7 @@ config MACH_TOSA
 
 config TOSA_BT
 	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
-	depends on MACH_TOSA
+	depends on MACH_TOSA && NET
 	select RFKILL
 	help
 	  This is a simple driver that is able to control
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 12fb0f4ae359..50e18ed37fa6 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -30,8 +30,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <mach/pxa25x.h>
-#include <mach/gumstix.h>
+#include "pxa25x.h"
+#include "gumstix.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 8b90c4f2d430..17d08abeeb17 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <mach/gumstix.h>
-#include <mach/mfp-pxa25x.h>
+#include "gumstix.h"
+#include "mfp-pxa25x.h"
 #include <mach/irqs.h>
 #include <linux/platform_data/video-pxafb.h>
 
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index a727282bfa99..8a3c409294bf 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -42,13 +42,13 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/balloon3.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 
@@ -572,7 +572,7 @@ static inline void balloon3_i2c_init(void) {}
 #if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index bf366b39fa61..1c3cbfca9f40 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -29,8 +29,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
+#include "pxa320.h"
+#include "mxm8x10.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index be751470d37b..b592f79a1742 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 2503db9e3253..fa5f51d633a3 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -21,7 +21,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/libertas_spi.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
 
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index a17a91eb8e9a..7202022ee243 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -22,9 +22,18 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #undef GPIO24_SSP1_SFRM
-#include <mach/pxa27x.h>
+#undef GPIO86_GPIO
+#undef GPIO87_GPIO
+#undef GPIO88_GPIO
+#undef GPIO89_GPIO
+#include "pxa27x.h"
+#undef GPIO24_SSP1_SFRM
+#undef GPIO86_GPIO
+#undef GPIO87_GPIO
+#undef GPIO88_GPIO
+#undef GPIO89_GPIO
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/smemc.h>
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 5851f4c254c1..5f5ac7c8faf0 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -26,6 +26,7 @@
 #include <linux/dm9000.h>
 #include <linux/leds.h>
 #include <linux/rtc-v3020.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
@@ -46,8 +47,8 @@
 #include <asm/setup.h>
 #include <asm/system_info.h>
 
-#include <mach/pxa300.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa300.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
@@ -305,11 +306,14 @@ static inline void cm_x300_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup cm_x300_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data cm_x300_backlight_data = {
-	.pwm_id		= 2,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -323,6 +327,7 @@ static struct platform_device cm_x300_backlight_device = {
 
 static void cm_x300_init_bl(void)
 {
+	pwm_add_table(cm_x300_pwm_lookup, ARRAY_SIZE(cm_x300_pwm_lookup));
 	platform_device_register(&cm_x300_backlight_device);
 }
 #else
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 638b0bb88426..dc44fbbe5073 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -22,11 +22,11 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <asm/io.h>
 
-#include <mach/pxa27x.h>
-#include <mach/colibri.h>
+#include "pxa27x.h"
+#include "colibri.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x-udc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 3aa264640c9d..8cff770e6a00 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -20,6 +20,7 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c/pxa-i2c.h>
 
@@ -29,8 +30,8 @@
 #include <mach/hardware.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
@@ -184,11 +185,14 @@ static inline void income_lcd_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup income_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data income_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 0x3ff,
 	.dft_brightness	= 0x1ff,
-	.pwm_period_ns	= 1000000,
 	.enable_gpio	= -1,
 };
 
@@ -202,6 +206,7 @@ static struct platform_device income_backlight = {
 
 static void __init income_pwm_init(void)
 {
+	pwm_add_table(income_pwm_lookup, ARRAY_SIZE(income_pwm_lookup));
 	platform_device_register(&income_backlight);
 }
 #else
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 3503826333c7..e68acdd0cdbb 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -27,8 +27,8 @@
 #include <asm/sizes.h>
 
 #include <mach/audio.h>
-#include <mach/colibri.h>
-#include <mach/pxa27x.h>
+#include "colibri.h"
+#include "pxa27x.h"
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index f1a1ac1fbd85..6a5558d95d4e 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -22,8 +22,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa300.h>
-#include <mach/colibri.h>
+#include "pxa300.h"
+#include "colibri.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index f6cc8b0ab82f..17067a3039a8 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -23,13 +23,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa320.h>
-#include <mach/colibri.h>
+#include "pxa320.h"
+#include "colibri.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 8240291ab8cf..b04431bb4ba7 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -22,8 +22,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <mach/pxa3xx-regs.h>
-#include <mach/mfp-pxa300.h>
-#include <mach/colibri.h>
+#include "mfp-pxa300.h"
+#include "colibri.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/colibri.h
index cb4236e98a0f..cb4236e98a0f 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/colibri.h
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 89f790dda93e..dc109dc3a622 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -48,12 +48,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <mach/corgi.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 7a39efc50865..d9206811be9b 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -27,7 +27,7 @@
 
 #include <mach/corgi.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fadfff8feaef..bf19b8426d2c 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -21,8 +21,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/csb726.h>
-#include <mach/pxa27x.h>
+#include "csb726.h"
+#include "pxa27x.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/audio.h>
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/csb726.h
index 00cfbbbf73f7..f1f2a78cfd16 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/csb726.h
@@ -11,7 +11,7 @@
 #ifndef CSB726_H
 #define CSB726_H
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 #define CSB726_GPIO_IRQ_LAN	52
 #define CSB726_GPIO_IRQ_SM501	53
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c62473235a13..fffb697bbf0e 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -6,7 +6,7 @@
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/i2c/pxa-i2c.h>
 
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -14,7 +14,7 @@
 #include <mach/irqs.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
 #include <linux/platform_data/mmp_dma.h>
@@ -395,6 +395,26 @@ static struct resource pxa_ir_resources[] = {
 		.end    = IRQ_ICP,
 		.flags  = IORESOURCE_IRQ,
 	},
+	[3] = {
+		.start  = 0x40800000,
+		.end	= 0x4080001b,
+		.flags  = IORESOURCE_MEM,
+	},
+	[4] = {
+		.start  = 0x40700000,
+		.end	= 0x40700023,
+		.flags  = IORESOURCE_MEM,
+	},
+	[5] = {
+		.start  = 17,
+		.end	= 17,
+		.flags  = IORESOURCE_DMA,
+	},
+	[6] = {
+		.start  = 18,
+		.end	= 18,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device pxa_device_ficp = {
@@ -1183,6 +1203,7 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
 
 static struct mmp_dma_platdata pxa_dma_pdata = {
 	.dma_channels	= 0,
+	.nb_requestors	= 0,
 };
 
 static struct resource pxa_dma_resource[] = {
@@ -1211,8 +1232,9 @@ static struct platform_device pxa2xx_pxa_dma = {
 	.resource	= pxa_dma_resource,
 };
 
-void __init pxa2xx_set_dmac_info(int nb_channels)
+void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
 {
 	pxa_dma_pdata.dma_channels = nb_channels;
+	pxa_dma_pdata.nb_requestors = nb_requestors;
 	pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
 }
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9d7072b04045..6e0268deec43 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -39,14 +39,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -289,7 +289,7 @@ static void nand_cs_off(void)
 static void em_x270_nand_cmd_ctl(struct mtd_info *mtd, int dat,
 				 unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
 
 	dsb();
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/eseries-irq.h
index de292b269c63..de292b269c63 100644
--- a/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ b/arch/arm/mach-pxa/eseries-irq.h
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 16dc95f68125..e838b11fb8c7 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -31,12 +31,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/eseries-gpio.h>
-#include <mach/eseries-irq.h>
+#include "eseries-irq.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 
 #include "devices.h"
@@ -57,7 +57,7 @@ struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_pullup_inverted = 1
 };
 
-static struct platform_device e7xx_gpio_vbus = {
+static struct platform_device e7xx_gpio_vbus __maybe_unused = {
 	.name	= "gpio-vbus",
 	.id	= -1,
 	.dev	= {
@@ -126,7 +126,7 @@ struct resource eseries_tmio_resources[] = {
 };
 
 /* Some e-series hardware cannot control the 32K clock */
-static void __init eseries_register_clks(void)
+static void __init __maybe_unused eseries_register_clks(void)
 {
 	clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768);
 }
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index ab93441e596e..34ad0a89d4a9 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
@@ -28,12 +29,12 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/hardware.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -49,11 +50,14 @@
 #define GPIO19_GEN1_CAM_RST		19
 #define GPIO28_GEN2_CAM_RST		28
 
+static struct pwm_lookup ezx_pwm_lookup[] __maybe_unused = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78700,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data ezx_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -79,7 +83,7 @@ static struct pxafb_mode_info mode_ezx_old = {
 	.sync			= 0,
 };
 
-static struct pxafb_mach_info ezx_fb_info_1 = {
+static struct pxafb_mach_info ezx_fb_info_1 __maybe_unused = {
 	.modes		= &mode_ezx_old,
 	.num_modes	= 1,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP,
@@ -100,17 +104,17 @@ static struct pxafb_mode_info mode_72r89803y01 = {
 	.sync			= 0,
 };
 
-static struct pxafb_mach_info ezx_fb_info_2 = {
+static struct pxafb_mach_info ezx_fb_info_2 __maybe_unused = {
 	.modes		= &mode_72r89803y01,
 	.num_modes	= 1,
 	.lcd_conn	= LCD_COLOR_TFT_18BPP,
 };
 
-static struct platform_device *ezx_devices[] __initdata = {
+static struct platform_device *ezx_devices[] __initdata __maybe_unused = {
 	&ezx_backlight_device,
 };
 
-static unsigned long ezx_pin_config[] __initdata = {
+static unsigned long ezx_pin_config[] __initdata __maybe_unused = {
 	/* PWM backlight */
 	GPIO16_PWM0_OUT,
 
@@ -817,6 +821,7 @@ static void __init a780_init(void)
 		platform_device_register(&a780_camera);
 	}
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
@@ -884,6 +889,7 @@ static void __init e680_init(void)
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(e680_devices));
 }
@@ -951,6 +957,7 @@ static void __init a1200_init(void)
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
 }
@@ -1143,6 +1150,7 @@ static void __init a910_init(void)
 		platform_device_register(&a910_camera);
 	}
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
@@ -1210,6 +1218,7 @@ static void __init e6_init(void)
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(e6_devices));
 }
@@ -1251,6 +1260,7 @@ static void __init e2_init(void)
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
+	pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(e2_devices));
 }
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index f6c76a3ee3b2..9c5b2fb054f9 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -40,10 +40,10 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/gumstix.h>
+#include "udc.h"
+#include "gumstix.h"
 
 #include "generic.h"
 
@@ -139,14 +139,14 @@ static void gumstix_setup_bt_clock(void)
 {
 	int timeout = 500;
 
-	if (!(OSCC & OSCC_OOK))
+	if (!(readl(OSCC) & OSCC_OOK))
 		pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
 	else
 		return;
 
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 	do {
-		if (OSCC & OSCC_OOK)
+		if (readl(OSCC) & OSCC_OOK)
 			break;
 		udelay(1);
 	} while (--timeout);
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/gumstix.h
index f7df27bbb42e..825f2d1260ae 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/gumstix.h
@@ -6,7 +6,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 875ec3351499..be2a9c3fd55b 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -30,9 +30,9 @@
 #include <asm/mach/map.h>
 #include <asm/irq.h>
 
-#include <mach/pxa25x.h>
-#include <mach/h5000.h>
-#include <mach/udc.h>
+#include "pxa25x.h"
+#include "h5000.h"
+#include "udc.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/h5000.h b/arch/arm/mach-pxa/h5000.h
index 2a5ae3802787..252461fd2ac8 100644
--- a/arch/arm/mach-pxa/include/mach/h5000.h
+++ b/arch/arm/mach-pxa/h5000.h
@@ -18,7 +18,7 @@
 #ifndef __ASM_ARCH_H5000_H
 #define __ASM_ARCH_H5000_H
 
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 
 /*
  * CPU GPIOs
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 7a8d749a07b8..70e9c06595f6 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -24,7 +24,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 5fb41ad6e3bc..4a2f9aba93ea 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -44,7 +44,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/hx4700.h>
 #include <linux/platform_data/irda-pxaficp.h>
 
@@ -557,10 +557,8 @@ static struct platform_device hx4700_lcd = {
  */
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = -1,	/* Superseded by pwm_lookup */
 	.max_brightness = 200,
 	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
 	.enable_gpio    = -1,
 };
 
@@ -630,7 +628,6 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
 
 static struct pxa2xx_spi_master pxa_ssp2_master_info = {
 	.num_chipselect = 1,
-	.clock_enable   = CKEN_SSP2,
 	.enable_dma     = 1,
 };
 
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 9b0eb0252af6..cbaf4f6edcda 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -20,8 +20,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa320.h>
-#include <mach/mxm8x10.h>
+#include "pxa320.h"
+#include "mxm8x10.h"
 
 #include <linux/spi/spi.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -116,13 +116,11 @@ static struct spi_board_info mcp251x_board_info[] = {
 };
 
 static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
-	.clock_enable   = CKEN_SSP3,
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };
 
 static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
-	.clock_enable   = CKEN_SSP4,
 	.num_chipselect = 2,
 	.enable_dma     = 1
 };
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index f6d02e4cbcda..c410d84b243d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -31,8 +31,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
-#include <mach/idp.h>
+#include "pxa25x.h"
+#include "idp.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/bitfield.h>
 #include <linux/platform_data/mmc-pxamci.h>
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/idp.h
index 7e63f4680271..7182ff92b732 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/idp.h
@@ -23,7 +23,7 @@
  * IDP hardware.
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 #define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
 #define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index ba6a6e1d29e9..5f6b850ebe33 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -52,9 +52,9 @@
 #define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
 #define GPIO102_MAGICIAN_KEY_PHONE		102
 #define GPIO103_MAGICIAN_LED_KP			103
-#define GPIO104_MAGICIAN_LCD_POWER_1 		104
-#define GPIO105_MAGICIAN_LCD_POWER_2		105
-#define GPIO106_MAGICIAN_LCD_POWER_3		106
+#define GPIO104_MAGICIAN_LCD_VOFF_EN		104
+#define GPIO105_MAGICIAN_LCD_VON_EN		105
+#define GPIO106_MAGICIAN_LCD_DCDC_NRESET	106
 #define GPIO107_MAGICIAN_DS1WM_IRQ		107
 #define GPIO108_MAGICIAN_GSM_READY		108
 #define GPIO114_MAGICIAN_UNKNOWN		114
@@ -78,43 +78,51 @@
  * CPLD EGPIOs
  */
 
-#define MAGICIAN_EGPIO_BASE			PXA_NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE		PXA_NR_BUILTIN_GPIO
 #define MAGICIAN_EGPIO(reg,bit) \
 	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
 
 /* output */
 
-#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
-#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
-#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
-#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
-#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
-#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
-#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
-#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
-#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
-#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
-#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
-#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
-#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
-#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
-#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
-#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_BQ24022_ISET2		MAGICIAN_EGPIO(2, 5)
-#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+#define EGPIO_MAGICIAN_TOPPOLY_POWER	MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER	MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET	MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER	MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER	MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER		MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0		MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1		MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER	MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET	MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER	MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER		MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER		MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC	MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_IR_RX_SHUTDOWN	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP	MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2	MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_BQ24022_ISET2	MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_NICD_CHARGE	MAGICIAN_EGPIO(2, 6)
+#define EGPIO_MAGICIAN_GSM_POWER	MAGICIAN_EGPIO(2, 7)
 
 /* input */
 
-#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+/* USB or AC charger type */
+#define EGPIO_MAGICIAN_CABLE_TYPE	MAGICIAN_EGPIO(4, 0)
+/*
+ * Vbus is detected
+ * FIXME behaves like (6,3), may differ for host/device
+ */
+#define EGPIO_MAGICIAN_CABLE_VBUS	MAGICIAN_EGPIO(4, 1)
 
-#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
-#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
-#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
-#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
-#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+#define EGPIO_MAGICIAN_BOARD_ID0	MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1	MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2	MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT	MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY	MAGICIAN_EGPIO(5, 4)
 
-#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+#define EGPIO_MAGICIAN_EP_INSERT	MAGICIAN_EGPIO(6, 1)
+/* FIXME behaves like (4,1), may differ for host/device */
+#define EGPIO_MAGICIAN_CABLE_INSERTED	MAGICIAN_EGPIO(6, 3)
 
 #endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
index 1b80a4805a60..e69de29bb2d1 100644
--- a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
@@ -1,163 +0,0 @@
-#ifndef _ASM_ARCH_PXA25X_UDC_H
-#define _ASM_ARCH_PXA25X_UDC_H
-
-#ifdef _ASM_ARCH_PXA27X_UDC_H
-#error "You can't include both PXA25x and PXA27x UDC support"
-#endif
-
-#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
-#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
-#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
-
-#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
-#define UDCCR_UDE	(1 << 0)	/* UDC enable */
-#define UDCCR_UDA	(1 << 1)	/* UDC active */
-#define UDCCR_RSM	(1 << 2)	/* Device resume */
-#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
-#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
-#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
-#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
-#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
-
-#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
-#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
-#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
-#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
-#define UDCCS0_SST	(1 << 4)	/* Sent stall */
-#define UDCCS0_FST	(1 << 5)	/* Force stall */
-#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
-#define UDCCS0_SA	(1 << 7)	/* Setup active */
-
-/* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
-
-#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
-
-#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
-#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
-
-#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
-
-/* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
-
-#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
-#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
-#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
-#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
-#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
-
-/* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
-
-#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
-#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
-#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
-#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
-#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
-#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
-#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
-
-#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
-#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
-#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
-#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
-#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
-#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
-#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
-#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
-#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
-#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
-#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
-#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
-#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
-#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
-#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
-#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
-#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
-#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
-#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
-#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
-#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
-#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
-#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
-#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
-
-#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
-
-#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
-#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
-#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
-#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
-#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
-#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
-#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
-#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
-
-#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
-
-#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
-#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
-#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
-#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
-#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
-#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
-#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
-#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
-
-#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
-
-#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
-#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
-#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
-#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
-#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
-#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
-#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
-#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
-
-#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
-
-#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
-#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
-#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
-#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
-#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
-#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
-#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
-#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index f1dd62946b36..5537d5601d70 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -134,10 +134,10 @@
 /*
  * PXA2xx specific Core clock definitions
  */
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+#define CCCR		io_p2v(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		io_p2v(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		io_p2v(0x41300004)  /* Clock Enable Register */
+#define OSCC		io_p2v(0x41300008)  /* Oscillator Configuration Register */
 
 #define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
 #define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index f4d48d20754e..888bf7ade15a 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -18,7 +18,7 @@
 /*
  * Oscillator Configuration Register (OSCC)
  */
-#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+#define OSCC           io_p2v(0x41350000)  /* Oscillator Configuration Register */
 
 #define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 5d665588c7eb..051c554776a6 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -41,11 +41,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/littleton.h>
+#include "littleton.h"
 #include <linux/platform_data/mtd-nand-pxa3xx.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/littleton.h
index 8066be54e9f5..8066be54e9f5 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/littleton.h
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 4823d972e647..e9f401b0a432 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,6 +23,7 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 
@@ -39,8 +40,8 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
-#include <mach/lpd270.h>
+#include "pxa27x.h"
+#include "lpd270.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -271,11 +272,14 @@ static struct platform_device lpd270_flash_device[2] = {
 	},
 };
 
+static struct pwm_lookup lpd270_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data lpd270_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1,
 	.dft_brightness	= 1,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -474,6 +478,7 @@ static void __init lpd270_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pwm_add_table(lpd270_pwm_lookup, ARRAY_SIZE(lpd270_pwm_lookup));
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/lpd270.h
index 4edc712a2de8..4edc712a2de8 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/lpd270.h
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 6de32fa0e251..7245f3359564 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -47,14 +47,14 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <mach/lubbock.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index a9761c293028..abc918169367 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -24,8 +24,10 @@
 #include <linux/mfd/htc-pasic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/gpio_vbus.h>
@@ -36,13 +38,19 @@
 #include <asm/mach/arch.h>
 #include <asm/system_info.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/magician.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 
+#include <linux/regulator/max1586.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include "devices.h"
 #include "generic.h"
 
@@ -52,36 +60,36 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO20_nSDCS_2,
 	GPIO21_nSDCS_3,
 	GPIO15_nCS_1,
-	GPIO78_nCS_2,   /* PASIC3 */
-	GPIO79_nCS_3,   /* EGPIO CPLD */
+	GPIO78_nCS_2,	/* PASIC3 */
+	GPIO79_nCS_3,	/* EGPIO CPLD */
 	GPIO80_nCS_4,
 	GPIO33_nCS_5,
 
-	/* I2C */
+	/* I2C UDA1380 + OV9640 */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
 
-	/* PWM 0 */
+	/* PWM 0 - LCD backlight */
 	GPIO16_PWM0_OUT,
 
-	/* I2S */
+	/* I2S UDA1380 capture */
 	GPIO28_I2S_BITCLK_OUT,
 	GPIO29_I2S_SDATA_IN,
 	GPIO31_I2S_SYNC,
 	GPIO113_I2S_SYSCLK,
 
-	/* SSP 1 */
+	/* SSP 1 UDA1380 playback */
 	GPIO23_SSP1_SCLK,
 	GPIO24_SSP1_SFRM,
 	GPIO25_SSP1_TXD,
 
-	/* SSP 2 */
+	/* SSP 2 TSC2046 touchscreen */
 	GPIO19_SSP2_SCLK,
 	GPIO14_SSP2_SFRM,
 	GPIO89_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
-	/* MMC */
+	/* MMC/SD/SDHC slot */
 	GPIO32_MMC_CLK,
 	GPIO92_MMC_DAT_0,
 	GPIO109_MMC_DAT_1,
@@ -92,7 +100,7 @@ static unsigned long magician_pin_config[] __initdata = {
 	/* LCD */
 	GPIOxx_LCD_TFT_16BPP,
 
-	/* QCI */
+	/* QCI camera interface */
 	GPIO12_CIF_DD_7,
 	GPIO17_CIF_DD_6,
 	GPIO50_CIF_DD_3,
@@ -120,12 +128,13 @@ static unsigned long magician_pin_config[] __initdata = {
 };
 
 /*
- * IRDA
+ * IrDA
  */
 
 static struct pxaficp_platform_data magician_ficp_info = {
 	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.gpio_pwdown_inverted	= 0,
 };
 
 /*
@@ -134,11 +143,11 @@ static struct pxaficp_platform_data magician_ficp_info = {
 
 #define INIT_KEY(_code, _gpio, _desc)	\
 	{				\
-		.code   = KEY_##_code,	\
-		.gpio   = _gpio,	\
-		.desc   = _desc,	\
-		.type   = EV_KEY,	\
-		.wakeup = 1,		\
+		.code	= KEY_##_code,	\
+		.gpio	= _gpio,	\
+		.desc	= _desc,	\
+		.type	= EV_KEY,	\
+		.wakeup	= 1,		\
 	}
 
 static struct gpio_keys_button magician_button_table[] = {
@@ -160,164 +169,162 @@ static struct gpio_keys_button magician_button_table[] = {
 };
 
 static struct gpio_keys_platform_data gpio_keys_data = {
-	.buttons  = magician_button_table,
-	.nbuttons = ARRAY_SIZE(magician_button_table),
+	.buttons	= magician_button_table,
+	.nbuttons	= ARRAY_SIZE(magician_button_table),
 };
 
 static struct platform_device gpio_keys = {
-	.name = "gpio-keys",
-	.dev  = {
+	.name	= "gpio-keys",
+	.dev	= {
 		.platform_data = &gpio_keys_data,
 	},
-	.id   = -1,
+	.id	= -1,
 };
 
-
 /*
  * EGPIO (Xilinx CPLD)
  *
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ * 32-bit aligned 8-bit registers
+ * 16 possible registers (reg windows size), only 7 used:
+ * 3x output, 1x irq, 3x input
  */
 
 static struct resource egpio_resources[] = {
 	[0] = {
-		.start = PXA_CS3_PHYS,
-		.end   = PXA_CS3_PHYS + 0x20 - 1,
-		.flags = IORESOURCE_MEM,
+		.start	= PXA_CS3_PHYS,
+		.end	= PXA_CS3_PHYS + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end   = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
-		.flags = IORESOURCE_IRQ,
+		.start	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
 static struct htc_egpio_chip egpio_chips[] = {
 	[0] = {
-		.reg_start = 0,
-		.gpio_base = MAGICIAN_EGPIO(0, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_OUTPUT,
-		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+		.reg_start	= 0,
+		.gpio_base	= MAGICIAN_EGPIO(0, 0),
+		.num_gpios	= 24,
+		.direction	= HTC_EGPIO_OUTPUT,
+		/*
+		 * Depends on modules configuration
+		 */
+		.initial_values	= 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
 	},
 	[1] = {
-		.reg_start = 4,
-		.gpio_base = MAGICIAN_EGPIO(4, 0),
-		.num_gpios = 24,
-		.direction = HTC_EGPIO_INPUT,
+		.reg_start	= 4,
+		.gpio_base	= MAGICIAN_EGPIO(4, 0),
+		.num_gpios	= 24,
+		.direction	= HTC_EGPIO_INPUT,
 	},
 };
 
 static struct htc_egpio_platform_data egpio_info = {
-	.reg_width    = 8,
-	.bus_width    = 32,
-	.irq_base     = IRQ_BOARD_START,
-	.num_irqs     = 4,
-	.ack_register = 3,
-	.chip         = egpio_chips,
-	.num_chips    = ARRAY_SIZE(egpio_chips),
+	.reg_width	= 8,
+	.bus_width	= 32,
+	.irq_base	= IRQ_BOARD_START,
+	.num_irqs	= 4,
+	.ack_register	= 3,
+	.chip		= egpio_chips,
+	.num_chips	= ARRAY_SIZE(egpio_chips),
 };
 
 static struct platform_device egpio = {
-	.name          = "htc-egpio",
-	.id            = -1,
-	.resource      = egpio_resources,
-	.num_resources = ARRAY_SIZE(egpio_resources),
+	.name		= "htc-egpio",
+	.id		= -1,
+	.resource	= egpio_resources,
+	.num_resources	= ARRAY_SIZE(egpio_resources),
 	.dev = {
 		.platform_data = &egpio_info,
 	},
 };
 
 /*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
  */
 
 static struct pxafb_mode_info toppoly_modes[] = {
 	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 11,
-		.vsync_len    = 3,
-		.left_margin  = 19,
-		.upper_margin = 2,
-		.right_margin = 10,
-		.lower_margin = 2,
-		.sync         = 0,
+		.pixclock	= 96153,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 11,
+		.vsync_len	= 3,
+		.left_margin	= 19,
+		.upper_margin	= 2,
+		.right_margin	= 10,
+		.lower_margin	= 2,
+		.sync		= 0,
 	},
 };
 
 static struct pxafb_mode_info samsung_modes[] = {
 	{
-		.pixclock     = 96153,
-		.bpp          = 16,
-		.xres         = 240,
-		.yres         = 320,
-		.hsync_len    = 8,
-		.vsync_len    = 4,
-		.left_margin  = 9,
-		.upper_margin = 4,
-		.right_margin = 9,
-		.lower_margin = 4,
-		.sync         = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.pixclock	= 226469,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 4,
+		.left_margin	= 9,
+		.upper_margin	= 4,
+		.right_margin	= 9,
+		.lower_margin	= 4,
+		.sync	= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	},
 };
 
 static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
 {
-	pr_debug("Toppoly LCD power\n");
+	pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
 
 	if (on) {
-		pr_debug("on\n");
 		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
 		udelay(2000);
 		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
 		udelay(2000);
 		/* FIXME: enable LCDC here */
 		udelay(2000);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
 		udelay(2000);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
 	} else {
-		pr_debug("off\n");
 		msleep(15);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
 		udelay(500);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
 		udelay(1000);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
 		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
 	}
 }
 
 static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
 {
-	pr_debug("Samsung LCD power\n");
+	pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
 
 	if (on) {
-		pr_debug("on\n");
 		if (system_rev < 3)
 			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
 		else
 			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
-		mdelay(10);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
-		mdelay(30);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
-		mdelay(10);
+		mdelay(6);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+		mdelay(6);	/* Avdd -> Voff >5ms */
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+		mdelay(16);	/* Voff -> Von >(5+10)ms */
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
 	} else {
-		pr_debug("off\n");
-		mdelay(10);
-		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
-		mdelay(30);
-		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
-		mdelay(10);
-		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		mdelay(10);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+		mdelay(16);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+		mdelay(6);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+		mdelay(6);
 		if (system_rev < 3)
 			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
 		else
@@ -326,29 +333,43 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
 }
 
 static struct pxafb_mach_info toppoly_info = {
-	.modes           = toppoly_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power = toppoly_lcd_power,
+	.modes			= toppoly_modes,
+	.num_modes		= 1,
+	.fixed_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP,
+	.pxafb_lcd_power	= toppoly_lcd_power,
 };
 
 static struct pxafb_mach_info samsung_info = {
-	.modes           = samsung_modes,
-	.num_modes       = 1,
-	.fixed_modes     = 1,
-	.lcd_conn	 = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
-			   LCD_ALTERNATE_MAPPING,
-	.pxafb_lcd_power = samsung_lcd_power,
+	.modes			= samsung_modes,
+	.num_modes		= 1,
+	.fixed_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+		LCD_ALTERNATE_MAPPING,
+	.pxafb_lcd_power	= samsung_lcd_power,
 };
 
 /*
  * Backlight
  */
 
+static struct pwm_lookup magician_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 30923,
+		   PWM_POLARITY_NORMAL),
+};
+
+ /*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+	REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
+
 static struct gpio magician_bl_gpios[] = {
-	{ EGPIO_MAGICIAN_BL_POWER,  GPIOF_DIR_OUT, "Backlight power" },
-	{ EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+	{ EGPIO_MAGICIAN_BL_POWER,	GPIOF_DIR_OUT, "Backlight power" },
+	{ EGPIO_MAGICIAN_BL_POWER2,	GPIOF_DIR_OUT, "Backlight power 2" },
 };
 
 static int magician_backlight_init(struct device *dev)
@@ -358,6 +379,7 @@ static int magician_backlight_init(struct device *dev)
 
 static int magician_backlight_notify(struct device *dev, int brightness)
 {
+	pr_debug("Brightness = %i\n", brightness);
 	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
 	if (brightness >= 200) {
 		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
@@ -373,28 +395,33 @@ static void magician_backlight_exit(struct device *dev)
 	gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
 }
 
+/*
+ * LCD PWM backlight (main)
+ *
+ * MP1521 frequency should be:
+ *	100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
-	.max_brightness = 272,
-	.dft_brightness = 100,
-	.pwm_period_ns  = 30923,
-	.enable_gpio    = -1,
-	.init           = magician_backlight_init,
-	.notify         = magician_backlight_notify,
-	.exit           = magician_backlight_exit,
+	.max_brightness	= 272,
+	.dft_brightness	= 100,
+	.enable_gpio	= -1,
+	.init		= magician_backlight_init,
+	.notify		= magician_backlight_notify,
+	.exit		= magician_backlight_exit,
 };
 
 static struct platform_device backlight = {
-	.name = "pwm-backlight",
-	.id   = -1,
-	.dev  = {
-		.parent        = &pxa27x_device_pwm0.dev,
-		.platform_data = &backlight_data,
+	.name	= "pwm-backlight",
+	.id	= -1,
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &backlight_data,
 	},
 };
 
 /*
- * LEDs
+ * GPIO LEDs, Phone keys backlight, vibra
  */
 
 static struct gpio_led gpio_leds[] = {
@@ -416,69 +443,32 @@ static struct gpio_led_platform_data gpio_led_info = {
 };
 
 static struct platform_device leds_gpio = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev  = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &gpio_led_info,
 	},
 };
 
-static struct pasic3_led pasic3_leds[] = {
-	{
-		.led = {
-			.name            = "magician:red",
-			.default_trigger = "ds2760-battery.0-charging",
-		},
-		.hw_num = 0,
-		.bit2   = PASIC3_BIT2_LED0,
-		.mask   = PASIC3_MASK_LED0,
-	},
-	{
-		.led = {
-			.name            = "magician:green",
-			.default_trigger = "ds2760-battery.0-charging-or-full",
-		},
-		.hw_num = 1,
-		.bit2   = PASIC3_BIT2_LED1,
-		.mask   = PASIC3_MASK_LED1,
-	},
-	{
-		.led = {
-			.name            = "magician:blue",
-			.default_trigger = "bluetooth",
-		},
-		.hw_num = 2,
-		.bit2   = PASIC3_BIT2_LED2,
-		.mask   = PASIC3_MASK_LED2,
-	},
-};
-
-static struct pasic3_leds_machinfo pasic3_leds_info = {
-	.num_leds   = ARRAY_SIZE(pasic3_leds),
-	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
-	.leds       = pasic3_leds,
-};
-
 /*
  * PASIC3 with DS1WM
  */
 
 static struct resource pasic3_resources[] = {
 	[0] = {
-		.start  = PXA_CS2_PHYS,
+		.start	= PXA_CS2_PHYS,
 		.end	= PXA_CS2_PHYS + 0x1b,
-		.flags  = IORESOURCE_MEM,
+		.flags	= IORESOURCE_MEM,
 	},
 	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
 	[1] = {
-		.start  = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end    = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+		.start	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct pasic3_platform_data pasic3_platform_data = {
-	.led_pdata  = &pasic3_leds_info,
 	.clock_rate = 4000000,
 };
 
@@ -493,25 +483,42 @@ static struct platform_device pasic3 = {
 };
 
 /*
- * USB "Transceiver"
+ * PXA UDC
+ */
+
+static void magician_udc_command(int cmd)
+{
+	if (cmd == PXA2XX_UDC_CMD_CONNECT)
+		UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+	else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+		UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+	.udc_command	= magician_udc_command,
+	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+/*
+ * USB device VBus detection
  */
 
 static struct resource gpio_vbus_resource = {
-	.flags = IORESOURCE_IRQ,
-	.start = IRQ_MAGICIAN_VBUS,
-	.end   = IRQ_MAGICIAN_VBUS,
+	.flags	= IORESOURCE_IRQ,
+	.start	= IRQ_MAGICIAN_VBUS,
+	.end	= IRQ_MAGICIAN_VBUS,
 };
 
 static struct gpio_vbus_mach_info gpio_vbus_info = {
-	.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
-	.gpio_vbus   = EGPIO_MAGICIAN_CABLE_STATE_USB,
+	.gpio_pullup	= GPIO27_MAGICIAN_USBC_PUEN,
+	.gpio_vbus	= EGPIO_MAGICIAN_CABLE_VBUS,
 };
 
 static struct platform_device gpio_vbus = {
-	.name          = "gpio-vbus",
-	.id            = -1,
-	.num_resources = 1,
-	.resource      = &gpio_vbus_resource,
+	.name		= "gpio-vbus",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &gpio_vbus_resource,
 	.dev = {
 		.platform_data = &gpio_vbus_info,
 	},
@@ -521,19 +528,60 @@ static struct platform_device gpio_vbus = {
  * External power
  */
 
-static int power_supply_init(struct device *dev)
+static int magician_supply_init(struct device *dev)
+{
+	int ret = -1;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "Cable is AC charger");
+	if (ret) {
+		pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+		goto err_ac;
+	}
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERTED, "Cable inserted");
+	if (ret) {
+		pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+		goto err_usb;
+	}
+
+	return 0;
+
+err_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+	return ret;
+}
+
+static void magician_set_charge(int flags)
 {
-	return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (flags & PDA_POWER_CHARGE_AC) {
+		pr_debug("Charging from AC\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+	} else if (flags & PDA_POWER_CHARGE_USB) {
+		pr_debug("Charging from USB\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+	} else {
+		pr_debug("Charging disabled\n");
+		gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+	}
 }
 
 static int magician_is_ac_online(void)
 {
-	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+		gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
 }
 
-static void power_supply_exit(struct device *dev)
+static int magician_is_usb_online(void)
 {
-	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERTED) &&
+		(!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+}
+
+static void magician_supply_exit(struct device *dev)
+{
+	gpio_free(EGPIO_MAGICIAN_CABLE_INSERTED);
+	gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
 }
 
 static char *magician_supplicants[] = {
@@ -541,38 +589,40 @@ static char *magician_supplicants[] = {
 };
 
 static struct pda_power_pdata power_supply_info = {
-	.init            = power_supply_init,
-	.is_ac_online    = magician_is_ac_online,
-	.exit            = power_supply_exit,
-	.supplied_to     = magician_supplicants,
-	.num_supplicants = ARRAY_SIZE(magician_supplicants),
+	.init			= magician_supply_init,
+	.exit			= magician_supply_exit,
+	.is_ac_online		= magician_is_ac_online,
+	.is_usb_online		= magician_is_usb_online,
+	.set_charge		= magician_set_charge,
+	.supplied_to		= magician_supplicants,
+	.num_supplicants	= ARRAY_SIZE(magician_supplicants),
 };
 
 static struct resource power_supply_resources[] = {
 	[0] = {
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
+		.name	= "ac",
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+			IORESOURCE_IRQ_LOWEDGE,
+		.start	= IRQ_MAGICIAN_VBUS,
+		.end	= IRQ_MAGICIAN_VBUS,
 	},
 	[1] = {
-		.name  = "usb",
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
-		         IORESOURCE_IRQ_LOWEDGE,
-		.start = IRQ_MAGICIAN_VBUS,
-		.end   = IRQ_MAGICIAN_VBUS,
+		.name	= "usb",
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+			IORESOURCE_IRQ_LOWEDGE,
+		.start	= IRQ_MAGICIAN_VBUS,
+		.end	= IRQ_MAGICIAN_VBUS,
 	},
 };
 
 static struct platform_device power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
+	.name	= "pda-power",
+	.id	= -1,
+	.dev = {
 		.platform_data = &power_supply_info,
 	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
+	.resource	= power_supply_resources,
+	.num_resources	= ARRAY_SIZE(power_supply_resources),
 };
 
 /*
@@ -586,11 +636,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
-		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+		.max_uA		= 500000,
+		.valid_ops_mask	= REGULATOR_CHANGE_CURRENT |
+			REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
-	.consumer_supplies      = bq24022_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(bq24022_consumers),
+	.consumer_supplies	= bq24022_consumers,
 };
 
 static struct gpio bq24022_gpios[] = {
@@ -603,39 +654,85 @@ static struct gpio_regulator_state bq24022_states[] = {
 };
 
 static struct gpio_regulator_config bq24022_info = {
-	.supply_name = "bq24022",
+	.supply_name		= "bq24022",
 
-	.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
-	.enable_high = 0,
-	.enabled_at_boot = 0,
+	.enable_gpio		= GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
 
-	.gpios = bq24022_gpios,
-	.nr_gpios = ARRAY_SIZE(bq24022_gpios),
+	.gpios			= bq24022_gpios,
+	.nr_gpios		= ARRAY_SIZE(bq24022_gpios),
 
-	.states = bq24022_states,
-	.nr_states = ARRAY_SIZE(bq24022_states),
+	.states			= bq24022_states,
+	.nr_states		= ARRAY_SIZE(bq24022_states),
 
-	.type = REGULATOR_CURRENT,
-	.init_data = &bq24022_init_data,
+	.type			= REGULATOR_CURRENT,
+	.init_data		= &bq24022_init_data,
 };
 
 static struct platform_device bq24022 = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
+	.name	= "gpio-regulator",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &bq24022_info,
 	},
 };
 
 /*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+	.constraints = {
+		.name		= "vcc_core range",
+		.min_uV		= 700000,
+		.max_uV		= 1475000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.consumer_supplies	= magician_max1587a_consumers,
+	.num_consumer_supplies	= ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+	{
+		.name		= "vcc_core",
+		.id		= MAX1586_V3,
+		.platform_data	= &magician_max1587a_v3_info,
+	}
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+	.subdevs     = magician_max1587a_subdevs,
+	.num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+	/*
+	 * NOTICE measured directly on the PCB (board_id == 0x3a), but
+	 * if R24 is present, it will boost the voltage
+	 * (write 1.475V, get 1.645V and smoke)
+	 */
+	.v3_gain     = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("max1586", 0x14),
+		.platform_data	= &magician_max1587a_info,
+	},
+};
+
+/*
  * MMC/SD
  */
 
 static int magician_mci_init(struct device *dev,
-				irq_handler_t detect_irq, void *data)
+	irq_handler_t detect_irq, void *data)
 {
 	return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
-			   "mmc card detect", data);
+		"mmc card detect", data);
 }
 
 static void magician_mci_exit(struct device *dev, void *data)
@@ -644,9 +741,9 @@ static void magician_mci_exit(struct device *dev, void *data)
 }
 
 static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     		= magician_mci_init,
-	.exit     		= magician_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init			= magician_mci_init,
+	.exit			= magician_mci_exit,
 	.gpio_card_detect	= -1,
 	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
 	.gpio_card_ro_invert	= 1,
@@ -660,47 +757,102 @@ static struct pxamci_platform_data magician_mci_info = {
 
 static struct pxaohci_platform_data magician_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+	/* port1: CSR Bluetooth, port2: OTG with UDC */
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.power_budget	= 0,
+	.power_on_delay = 100,
 };
 
-
 /*
  * StrataFlash
  */
 
+static int magician_flash_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+	if (ret) {
+		pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+		return ret;
+	}
+
+	ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+	if (ret) {
+		pr_err("Cannot set direction for flash enable (%i)\n", ret);
+		gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+	}
+
+	return ret;
+}
+
 static void magician_set_vpp(struct platform_device *pdev, int vpp)
 {
 	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
 }
 
+static void magician_flash_exit(struct platform_device *pdev)
+{
+	gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
 static struct resource strataflash_resource = {
-	.start = PXA_CS0_PHYS,
-	.end   = PXA_CS0_PHYS + SZ_64M - 1,
-	.flags = IORESOURCE_MEM,
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
 };
 
+static struct mtd_partition magician_flash_parts[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x0,
+		.size		= 0x40000,
+		.mask_flags	= MTD_WRITEABLE, /* EXPERIMENTAL */
+	},
+	{
+		.name		= "Linux Kernel",
+		.offset		= 0x40000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+/*
+ * physmap-flash driver
+ */
+
 static struct physmap_flash_data strataflash_data = {
-	.width = 4,
-	.set_vpp = magician_set_vpp,
+	.width		= 4,
+	.init		= magician_flash_init,
+	.set_vpp	= magician_set_vpp,
+	.exit		= magician_flash_exit,
+	.parts		= magician_flash_parts,
+	.nr_parts	= ARRAY_SIZE(magician_flash_parts),
 };
 
 static struct platform_device strataflash = {
-	.name          = "physmap-flash",
-	.id            = -1,
-	.resource      = &strataflash_resource,
-	.num_resources = 1,
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &strataflash_resource,
+	.num_resources	= 1,
 	.dev = {
 		.platform_data = &strataflash_data,
 	},
 };
 
 /*
- * I2C
+ * PXA I2C main controller
  */
 
 static struct i2c_pxa_platform_data i2c_info = {
-	.fast_mode = 1,
+	/* OV9640 I2C device doesn't support fast mode */
+	.fast_mode	= 0,
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+	.fast_mode	= 1,
 };
 
 /*
@@ -720,12 +872,13 @@ static struct platform_device *devices[] __initdata = {
 };
 
 static struct gpio magician_global_gpios[] = {
-	{ GPIO13_MAGICIAN_CPLD_IRQ,   GPIOF_IN, "CPLD_IRQ" },
+	{ GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
 	{ GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
-	{ GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
-	{ GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
-	{ GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
-	{ GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+
+	/* NOTICE valid LCD init sequence */
+	{ GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_LOW, "LCD DCDC nreset" },
+	{ GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_LOW, "LCD VOFF enable" },
+	{ GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_LOW, "LCD VON enable" },
 };
 
 static void __init magician_init(void)
@@ -737,44 +890,55 @@ static void __init magician_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 	err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
 	if (err)
-		pr_err("magician: Failed to request GPIOs: %d\n", err);
+		pr_err("magician: Failed to request global GPIOs: %d\n", err);
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
 
-	platform_add_devices(ARRAY_AND_SIZE(devices));
+	pwm_add_table(magician_pwm_lookup, ARRAY_SIZE(magician_pwm_lookup));
 
 	pxa_set_ficp_info(&magician_ficp_info);
-	pxa27x_set_i2c_power_info(NULL);
+	pxa27x_set_i2c_power_info(&magician_i2c_power_info);
 	pxa_set_i2c_info(&i2c_info);
+
+	i2c_register_board_info(1,
+		ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
 	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
+	pxa_set_udc_info(&magician_udc_info);
 
 	/* Check LCD type we have */
 	cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
 	if (cpld) {
-		u8 board_id = __raw_readb(cpld+0x14);
+		u8 board_id = __raw_readb(cpld + 0x14);
+
 		iounmap(cpld);
 		system_rev = board_id & 0x7;
 		lcd_select = board_id & 0x8;
 		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
 		if (lcd_select && (system_rev < 3))
+			/* NOTICE valid LCD init sequence */
 			gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
-			                 GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
-		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
+				GPIOF_OUT_INIT_LOW, "Samsung LCD Power");
+		pxa_set_fb_info(NULL,
+			lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
-}
 
+	regulator_register_always_on(0, "power", pwm_backlight_supply,
+		ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+}
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-	.atag_offset = 0x100,
-	.map_io = pxa27x_map_io,
-	.nr_irqs = MAGICIAN_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.init_machine = magician_init,
+	.atag_offset	= 0x100,
+	.map_io		= pxa27x_map_io,
+	.nr_irqs	= MAGICIAN_NR_IRQS,
+	.init_irq	= pxa27x_init_irq,
+	.handle_irq	= pxa27x_handle_irq,
+	.init_machine	= magician_init,
 	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 2c0658cf6be2..40964069a17c 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -45,7 +46,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
@@ -248,11 +249,14 @@ static struct platform_device mst_flash_device[2] = {
 };
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup mainstone_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data mainstone_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -266,9 +270,16 @@ static struct platform_device mainstone_backlight_device = {
 
 static void __init mainstone_backlight_register(void)
 {
-	int ret = platform_device_register(&mainstone_backlight_device);
-	if (ret)
+	int ret;
+
+	pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
+
+	ret = platform_device_register(&mainstone_backlight_device);
+	if (ret) {
 		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
+		pwm_remove_table(mainstone_pwm_lookup,
+				 ARRAY_SIZE(mainstone_pwm_lookup));
+	}
 }
 #else
 #define mainstone_backlight_register()	do { } while (0)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/mfp-pxa25x.h
index cafadc33dfd8..1c59d4b3b19b 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/mfp-pxa25x.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_MFP_PXA25X_H
 #define __ASM_ARCH_MFP_PXA25X_H
 
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 /* GPIO */
 #define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/mfp-pxa27x.h
index b6132aa95dc0..9fe5601ce668 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/mfp-pxa27x.h
@@ -8,7 +8,7 @@
  * specific controller, and this should work in most cases.
  */
 
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN
  * bit is set, regardless of the GPIO configuration
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 666b78972c40..3732aec76750 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -21,7 +21,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa2xx.h>
+#include "mfp-pxa2xx.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h
index cbf51ae81855..cbf51ae81855 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.h
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/mfp-pxa300.h
index 4e1287070d21..5ee51e28304d 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/mfp-pxa300.h
@@ -15,7 +15,7 @@
 #ifndef __ASM_ARCH_MFP_PXA300_H
 #define __ASM_ARCH_MFP_PXA300_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/mfp-pxa320.h
index 3ce4682eabb6..e8797cfc72e0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+++ b/arch/arm/mach-pxa/mfp-pxa320.h
@@ -15,7 +15,7 @@
 #ifndef __ASM_ARCH_MFP_PXA320_H
 #define __ASM_ARCH_MFP_PXA320_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 89863a01ecd7..994edc0158d4 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -20,7 +20,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 #include <mach/pxa3xx-regs.h>
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h
index d375195d982b..d375195d982b 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.h
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/mfp-pxa930.h
index 04f7c97044f3..113967beeb67 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+++ b/arch/arm/mach-pxa/mfp-pxa930.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_MFP_PXA9xx_H
 #define __ASM_ARCH_MFP_PXA9xx_H
 
-#include <mach/mfp-pxa3xx.h>
+#include "mfp-pxa3xx.h"
 
 /* GPIO */
 #define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 29997bde277d..38a96a193dc4 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -26,6 +26,7 @@
 #include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/rtc.h>
 #include <linux/leds.h>
@@ -46,19 +47,19 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/regs-rtc.h>
+#include "pxa27x.h"
+#include "regs-rtc.h"
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
-#include <linux/platform_data/camera-pxa.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
+#include <linux/platform_data/media/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
 #include <media/soc_camera.h>
 
-#include <mach/mioa701.h>
+#include "mioa701.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -181,12 +182,15 @@ static unsigned long mioa701_pin_config[] = {
 	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
 };
 
+static struct pwm_lookup mioa701_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 4000 * 1024,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* LCD Screen and Backlight */
 static struct platform_pwm_backlight_data mioa701_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 50,
-	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
 	.enable_gpio	= -1,
 };
 
@@ -678,6 +682,7 @@ MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
 MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+MIO_SIMPLE_DEV(wm9713_acodec,	  "wm9713-codec",   NULL);
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
 MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
@@ -685,6 +690,7 @@ static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
 	&mioa701_backlight,
 	&mioa701_led,
+	&wm9713_acodec,
 	&pxa2xx_pcm,
 	&mioa701_sound,
 	&power_dev,
@@ -751,6 +757,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
+	pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/mioa701.h
index e57f5c724e8a..e57f5c724e8a 100644
--- a/arch/arm/mach-pxa/include/mach/mioa701.h
+++ b/arch/arm/mach-pxa/mioa701.h
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 14f6aaf8fcc9..4d89029e5401 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include "generic.h"
 
 static void isp116x_pfm_delay(struct device *dev, int delay)
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index d04ed4961e60..9a22ae0ad8c9 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -29,9 +29,9 @@
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa320.h>
+#include "pxa320.h"
 
-#include <mach/mxm8x10.h>
+#include "mxm8x10.h"
 
 #include "devices.h"
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/mxm8x10.h
index ffa15665a418..ffa15665a418 100644
--- a/arch/arm/mach-pxa/include/mach/mxm8x10.h
+++ b/arch/arm/mach-pxa/mxm8x10.h
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index e54a296fb81f..e5ae99db1de4 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -15,6 +15,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
@@ -27,14 +28,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -270,6 +271,11 @@ void __init palm27x_ac97_init(int minv, int maxv, int jack, int reset)
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palm27x_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 3500 * 1024,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int palm_bl_power;
 static int palm_lcd_power;
 
@@ -318,10 +324,8 @@ static void palm27x_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data palm27x_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 0xfe,
 	.dft_brightness	= 0x7e,
-	.pwm_period_ns	= 3500 * 1024,
 	.enable_gpio	= -1,
 	.init		= palm27x_backlight_init,
 	.notify		= palm27x_backlight_notify,
@@ -340,6 +344,7 @@ void __init palm27x_pwm_init(int bl, int lcd)
 {
 	palm_bl_power	= bl;
 	palm_lcd_power	= lcd;
+	pwm_add_table(palm27x_pwm_lookup, ARRAY_SIZE(palm27x_pwm_lookup));
 	platform_device_register(&palm27x_backlight);
 }
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/palm27x.h b/arch/arm/mach-pxa/palm27x.h
index d4eac3d6ffb5..d4eac3d6ffb5 100644
--- a/arch/arm/mach-pxa/include/mach/palm27x.h
+++ b/arch/arm/mach-pxa/palm27x.h
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index cf210b11ffcc..980f2847f5b5 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -32,7 +32,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/palmld.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -40,7 +40,7 @@
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 3ed9b029428b..876144aa3564 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -33,16 +33,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
-#include <mach/palmt5.h>
+#include "palmt5.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/palmt5.h
index e342c5921405..f850cc9de1b4 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/palmt5.h
@@ -15,7 +15,7 @@
 #ifndef _INCLUDE_PALMT5_H_
 #define _INCLUDE_PALMT5_H_
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /** HERE ARE GPIOs **/
 
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 7691c974ca4b..18946594a7c8 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/input.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/input/matrix_keypad.h>
@@ -31,13 +32,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <mach/palmtc.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -166,11 +167,14 @@ static inline void palmtc_keys_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup palmtc_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.1", 0, "pwm-backlight.0", NULL, PALMTC_PERIOD_NS,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data palmtc_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= PALMTC_MAX_INTENSITY,
 	.dft_brightness	= PALMTC_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTC_PERIOD_NS,
 	.enable_gpio	= GPIO_NR_PALMTC_BL_POWER,
 };
 
@@ -184,6 +188,7 @@ static struct platform_device palmtc_backlight = {
 
 static void __init palmtc_pwm_init(void)
 {
+	pwm_add_table(palmtc_pwm_lookup, ARRAY_SIZE(palmtc_pwm_lookup));
 	platform_device_register(&palmtc_backlight);
 }
 #else
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 956fd24ee6fd..36b46141a28b 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -21,6 +21,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/wm97xx.h>
@@ -31,13 +32,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
-#include <mach/palmte2.h>
+#include "palmte2.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
 
 #include "generic.h"
@@ -138,6 +139,11 @@ static struct platform_device palmte2_pxa_keys = {
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+static struct pwm_lookup palmte2_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL,
+		   PALMTE2_PERIOD_NS, PWM_POLARITY_NORMAL),
+};
+
 static struct gpio palmte_bl_gpios[] = {
 	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
 	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
@@ -161,10 +167,8 @@ static void palmte2_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= PALMTE2_MAX_INTENSITY,
 	.dft_brightness	= PALMTE2_MAX_INTENSITY,
-	.pwm_period_ns	= PALMTE2_PERIOD_NS,
 	.enable_gpio	= -1,
 	.init		= palmte2_backlight_init,
 	.notify		= palmte2_backlight_notify,
@@ -355,6 +359,7 @@ static void __init palmte2_init(void)
 	pxa_set_ac97_info(&palmte2_ac97_pdata);
 	pxa_set_ficp_info(&palmte2_ficp_platform_data);
 
+	pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/palmte2.h
index f89e989a7637..f89e989a7637 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/palmte2.h
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index d8b937c870de..4cc05ecce618 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -31,20 +31,20 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/audio.h>
-#include <mach/palmtreo.h>
+#include "palmtreo.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa2xx-regs.h>
 #include <linux/platform_data/asoc-palm27x.h>
-#include <linux/platform_data/camera-pxa.h>
-#include <mach/palm27x.h>
+#include <linux/platform_data/media/camera-pxa.h>
+#include "palm27x.h"
 
 #include <sound/pxa2xx-lib.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/palmtreo.h
index 714b6574393e..714b6574393e 100644
--- a/arch/arm/mach-pxa/include/mach/palmtreo.h
+++ b/arch/arm/mach-pxa/palmtreo.h
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 83f830dd8ad8..36646975b5d2 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -37,16 +37,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/palmtx.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -250,7 +250,7 @@ static inline void palmtx_keys_init(void) {}
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	char __iomem *nandaddr = this->IO_ADDR_W;
 
 	if (cmd == NAND_CMD_NONE)
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 1a35ddf218da..9c308de158c6 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -37,19 +37,19 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
-#include <mach/palmz72.h>
+#include "palmz72.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/asoc-palm27x.h>
-#include <mach/palm27x.h>
+#include "palm27x.h"
 
-#include <mach/pm.h>
-#include <linux/platform_data/camera-pxa.h>
+#include "pm.h"
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include <media/soc_camera.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/palmz72.h
index 0d4700a79612..0d4700a79612 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/palmz72.h
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 69918c7e3f1f..ccca9f7575c3 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -30,8 +30,8 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pxa27x.h>
-#include <mach/pcm027.h>
+#include "pxa27x.h"
+#include "pcm027.h"
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/pcm027.h
index 86ebd7b6c960..047cdf234f25 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/pcm027.h
@@ -23,7 +23,7 @@
  * Definitions of CPU card resources only
  */
 
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /* phyCORE-PXA270 (PCM027) Interrupts */
 #define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d8319b54299a..0bd5959ef7d5 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -24,18 +24,19 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
-#include <media/mt9v022.h>
+#include <media/i2c/mt9v022.h>
 #include <media/soc_camera.h>
 
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <asm/mach/map.h>
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pcm990_baseboard.h>
+#include "pcm990_baseboard.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
@@ -148,11 +149,14 @@ static struct pxafb_mach_info pcm990_fbinfo __initdata = {
 };
 #endif
 
+static struct pwm_lookup pcm990_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data pcm990_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1023,
 	.dft_brightness	= 1023,
-	.pwm_period_ns	= 78770,
 	.enable_gpio	= -1,
 };
 
@@ -542,6 +546,7 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
 	pxa_set_fb_info(NULL, &pcm990_fbinfo);
 #endif
+	pwm_add_table(pcm990_pwm_lookup, ARRAY_SIZE(pcm990_pwm_lookup));
 	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h
index 7e544c14967e..79d35adfa786 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/pcm990_baseboard.h
@@ -19,8 +19,8 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <mach/pcm027.h>
-#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+#include "pcm027.h"
+#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */
 
 /*
  * definitions relevant only when the PCM-990
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 37178a8559b1..388463b99090 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,7 +16,7 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 
-#include <mach/pm.h>
+#include "pm.h"
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
 static unsigned long *sleep_save;
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/pm.h
index 51558bcee999..3aab90d8d2b7 100644
--- a/arch/arm/mach-pxa/include/mach/pm.h
+++ b/arch/arm/mach-pxa/pm.h
@@ -29,6 +29,9 @@ extern int pxa_pm_enter(suspend_state_t state);
 extern int pxa_pm_prepare(void);
 extern void pxa_pm_finish(void);
 
+extern const char pm_enter_standby_start[], pm_enter_standby_end[];
+extern int pxa3xx_finish_suspend(unsigned long);
+
 /* NOTE: this is for PM debugging on Lubbock,  it's really a big
  * ugly, but let's keep the crap minimum here, instead of direct
  * accessing the LUBBOCK CPLD registers in arch/arm/mach-pxa/pm.c
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 195b1121c8f1..62a119137be7 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
+#include "udc.h"
 #include <linux/platform_data/irda-pxaficp.h>
 #include <mach/poodle.h>
 #include <linux/platform_data/video-pxafb.h>
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index 8e0e62ccdced..f128133a8f30 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -19,42 +19,18 @@
 #include "generic.h"
 
 #ifdef CONFIG_PXA3xx
-static const struct of_dev_auxdata const pxa3xx_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40100000, "pxa2xx-uart.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40200000, "pxa2xx-uart.1", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x40700000, "pxa2xx-uart.2", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-uart",		0x41600000, "pxa2xx-uart.3", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-mmc",	0x41100000, "pxa2xx-mci.0", NULL),
-	OF_DEV_AUXDATA("intel,pxa3xx-gpio",	0x40e00000, "pxa3xx-gpio", NULL),
-	OF_DEV_AUXDATA("marvell,pxa-ohci",	0x4c000000, "pxa27x-ohci", NULL),
-	OF_DEV_AUXDATA("mrvl,pxa-i2c",		0x40301680, "pxa2xx-i2c.0", NULL),
-	OF_DEV_AUXDATA("mrvl,pwri2c",		0x40f500c0, "pxa3xx-i2c.1", NULL),
-	OF_DEV_AUXDATA("marvell,pxa3xx-nand",	0x43100000, "pxa3xx-nand", NULL),
-	{}
-};
-
-static void __init pxa3xx_dt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     pxa3xx_auxdata_lookup, NULL);
-}
-
 static const char *const pxa3xx_dt_board_compat[] __initconst = {
 	"marvell,pxa300",
 	"marvell,pxa310",
 	"marvell,pxa320",
 	NULL,
 };
-#endif
 
-#ifdef CONFIG_PXA3xx
 DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_dt_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
 	.restart	= pxa_restart,
-	.init_machine	= pxa3xx_dt_init,
 	.dt_compat	= pxa3xx_dt_board_compat,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 1dc85ffc3e20..823504f48f80 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -30,9 +30,9 @@
 #include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/reset.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 
@@ -206,7 +206,7 @@ static int __init pxa25x_init(void)
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 
-		pxa2xx_set_dmac_info(16);
+		pxa2xx_set_dmac_info(16, 40);
 		pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
 		ret = platform_add_devices(pxa25x_devices,
 					   ARRAY_SIZE(pxa25x_devices));
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h
index 5a341752e32c..2011e8da0592 100644
--- a/arch/arm/mach-pxa/include/mach/pxa25x.h
+++ b/arch/arm/mach-pxa/pxa25x.h
@@ -3,7 +3,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 #include <mach/irqs.h>
 
 #endif /* __MACH_PXA25x_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h
index 4cf28f670706..4cf28f670706 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
+++ b/arch/arm/mach-pxa/pxa27x-udc.h
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 221260d5d109..2eaa341dd3f8 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -28,10 +28,10 @@
 #include <asm/irq.h>
 #include <asm/suspend.h>
 #include <mach/irqs.h>
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 
@@ -84,7 +84,7 @@ EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
  */
 static unsigned int pwrmode = PWRMODE_SLEEP;
 
-int __init pxa27x_set_pwrmode(unsigned int mode)
+int pxa27x_set_pwrmode(unsigned int mode)
 {
 	switch (mode) {
 	case PWRMODE_SLEEP:
@@ -132,7 +132,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
 	/* ensure voltage-change sequencer not initiated, which hangs */
@@ -151,7 +152,8 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_MEM:
 		cpu_suspend(pwrmode, pxa27x_finish_suspend);
 #ifndef CONFIG_IWMMXT
-		asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+		asm volatile(".arch_extension xscale\n\t"
+			     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 		break;
 	}
@@ -309,7 +311,7 @@ static int __init pxa27x_init(void)
 		if (!of_have_populated_dt()) {
 			pxa_register_device(&pxa27x_device_gpio,
 					    &pxa27x_gpio_info);
-			pxa2xx_set_dmac_info(32);
+			pxa2xx_set_dmac_info(32, 75);
 			ret = platform_add_devices(devices,
 						   ARRAY_SIZE(devices));
 		}
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h
index 599b925a657c..075131d83eab 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x.h
+++ b/arch/arm/mach-pxa/pxa27x.h
@@ -4,7 +4,7 @@
 #include <linux/suspend.h>
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa27x.h>
+#include "mfp-pxa27x.h"
 #include <mach/irqs.h>
 
 #define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
@@ -19,7 +19,7 @@
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-extern int __init pxa27x_set_pwrmode(unsigned int mode);
+extern int pxa27x_set_pwrmode(unsigned int mode);
 extern void pxa27x_cpu_pm_enter(suspend_state_t state);
 
 #endif /* __MACH_PXA27x_H */
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 447dcbb22f6f..6b5e566f52c8 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/mfp-pxa25x.h>
+#include "mfp-pxa25x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 28c5b5686638..df83b1bddf34 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/pxa300.h
index 733b6412c3df..59fa41025c80 100644
--- a/arch/arm/mach-pxa/include/mach/pxa300.h
+++ b/arch/arm/mach-pxa/pxa300.h
@@ -1,7 +1,7 @@
 #ifndef __MACH_PXA300_H
 #define __MACH_PXA300_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa300.h>
+#include "pxa3xx.h"
+#include "mfp-pxa300.h"
 
 #endif /* __MACH_PXA300_H */
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 2f55bb4b9087..a26eec57eec6 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/pxa320.h>
+#include "pxa320.h"
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/pxa320.h
index b6204e470d89..b9e5115a1c30 100644
--- a/arch/arm/mach-pxa/include/mach/pxa320.h
+++ b/arch/arm/mach-pxa/pxa320.h
@@ -1,8 +1,8 @@
 #ifndef __MACH_PXA320_H
 #define __MACH_PXA320_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa320.h>
+#include "pxa3xx.h"
+#include "mfp-pxa320.h"
 
 #endif /* __MACH_PXA320_H */
 
diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c
index 1c85275cb768..eba595fac8ca 100644
--- a/arch/arm/mach-pxa/pxa3xx-ulpi.c
+++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c
@@ -26,7 +26,7 @@
 #include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
-#include <mach/regs-u2d.h>
+#include "regs-u2d.h"
 #include <linux/platform_data/usb-pxa3xx-ulpi.h>
 
 struct pxa3xx_u2d_ulpi {
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 20ce2d386f17..3c9184d1d6b9 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,7 +30,7 @@
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/dma.h>
 #include <mach/smemc.h>
 #include <mach/irqs.h>
@@ -68,7 +68,6 @@ static unsigned long wakeup_src;
  */
 static void pxa3xx_cpu_standby(unsigned int pwrmode)
 {
-	extern const char pm_enter_standby_start[], pm_enter_standby_end[];
 	void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
 
 	memcpy_toio(sram + 0x8000, pm_enter_standby_start,
@@ -103,11 +102,10 @@ static void pxa3xx_cpu_pm_suspend(void)
 #ifndef CONFIG_IWMMXT
 	u64 acc0;
 
-	asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mra %Q0, %R0, acc0" : "=r" (acc0));
 #endif
 
-	extern int pxa3xx_finish_suspend(unsigned long);
-
 	/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
 	CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
 	CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
@@ -133,7 +131,8 @@ static void pxa3xx_cpu_pm_suspend(void)
 	AD3ER = 0;
 
 #ifndef CONFIG_IWMMXT
-	asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+	asm volatile(".arch_extension xscale\n\t"
+		     "mar acc0, %Q0, %R0" : "=r" (acc0));
 #endif
 }
 
@@ -450,7 +449,7 @@ static int __init pxa3xx_init(void)
 		if (of_have_populated_dt())
 			return 0;
 
-		pxa2xx_set_dmac_info(32);
+		pxa2xx_set_dmac_info(32, 100);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 		if (ret)
 			return ret;
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h
index b4143fb6631f..b4143fb6631f 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx.h
+++ b/arch/arm/mach-pxa/pxa3xx.h
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index ab624487cf39..da912be6eae7 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -17,7 +17,7 @@
 #include <linux/gpio-pxa.h>
 #include <linux/platform_device.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 
 #include "devices.h"
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/pxa930.h
index 190363b98d01..4eceb02978e8 100644
--- a/arch/arm/mach-pxa/include/mach/pxa930.h
+++ b/arch/arm/mach-pxa/pxa930.h
@@ -1,7 +1,7 @@
 #ifndef __MACH_PXA930_H
 #define __MACH_PXA930_H
 
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
+#include "pxa3xx.h"
+#include "mfp-pxa930.h"
 
 #endif /* __MACH_PXA930_H */
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 88f70c37ad0d..5a941bd3dbed 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -18,17 +18,19 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/property.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/input.h>
-#include <linux/rotary_encoder.h>
 #include <linux/gpio_keys.h>
 #include <linux/input/eeti_ts.h>
 #include <linux/leds.h>
 #include <linux/w1-gpio.h>
 #include <linux/sched.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -48,7 +50,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa300.h>
+#include "pxa300.h"
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
@@ -365,22 +367,31 @@ static struct pxaohci_platform_data raumfeld_ohci_info = {
  * Rotary encoder input device
  */
 
-static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
-	.steps		= 24,
-	.axis		= REL_X,
-	.relative_axis	= 1,
-	.gpio_a		= GPIO_VOLENC_A,
-	.gpio_b		= GPIO_VOLENC_B,
-	.inverted_a	= 1,
-	.inverted_b	= 0,
+static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
+	.dev_id = "rotary-encoder.0",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-0",
+				GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-0",
+				GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct property_entry raumfeld_rotary_properties[] = {
+	PROPERTY_ENTRY_INTEGER("rotary-encoder,steps-per-period", u32, 24),
+	PROPERTY_ENTRY_INTEGER("linux,axis",			  u32, REL_X),
+	PROPERTY_ENTRY_INTEGER("rotary-encoder,relative_axis",	  u32, 1),
+	{ },
+};
+
+static struct property_set raumfeld_rotary_property_set = {
+	.properties = raumfeld_rotary_properties,
 };
 
 static struct platform_device rotary_encoder_device = {
 	.name		= "rotary-encoder",
 	.id		= 0,
-	.dev		= {
-		.platform_data = &raumfeld_rotary_encoder_info,
-	}
 };
 
 /**
@@ -507,7 +518,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = {
 	.ext_pullup_enable_pin	= -EINVAL,
 };
 
-struct platform_device raumfeld_w1_gpio_device = {
+static struct platform_device raumfeld_w1_gpio_device = {
 	.name	= "w1-gpio",
 	.dev	= {
 		.platform_data = &w1_gpio_platform_data
@@ -531,13 +542,15 @@ static void __init raumfeld_w1_init(void)
  * Framebuffer device
  */
 
+static struct pwm_lookup raumfeld_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* PWM controlled backlight */
 static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	/* 10000 ns = 10 ms ^= 100 kHz */
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -618,6 +631,8 @@ static void __init raumfeld_lcd_init(void)
 	} else {
 		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
 		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+		pwm_add_table(raumfeld_pwm_lookup,
+			      ARRAY_SIZE(raumfeld_pwm_lookup));
 		platform_device_register(&raumfeld_pwm_backlight_device);
 	}
 
@@ -629,7 +644,7 @@ static void __init raumfeld_lcd_init(void)
  * SPI devices
  */
 
-struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
 	.sck		= GPIO_SPI_CLK,
 	.mosi		= GPIO_SPI_MOSI,
 	.miso		= GPIO_SPI_MISO,
@@ -848,7 +863,7 @@ static void __init raumfeld_power_init(void)
 static struct regulator_consumer_supply audio_va_consumer_supply =
 	REGULATOR_SUPPLY("va", "0-0048");
 
-struct regulator_init_data audio_va_initdata = {
+static struct regulator_init_data audio_va_initdata = {
 	.consumer_supplies = &audio_va_consumer_supply,
 	.num_consumer_supplies = 1,
 	.constraints = {
@@ -880,7 +895,7 @@ static struct regulator_consumer_supply audio_dummy_supplies[] = {
 	REGULATOR_SUPPLY("vlc", "0-0048"),
 };
 
-struct regulator_init_data audio_dummy_initdata = {
+static struct regulator_init_data audio_dummy_initdata = {
 	.consumer_supplies = audio_dummy_supplies,
 	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
 	.constraints = {
@@ -928,7 +943,7 @@ static struct regulator_init_data vcc_mmc_init_data = {
 	.num_consumer_supplies = 1,
 };
 
-struct max8660_subdev_data max8660_v6_subdev_data = {
+static struct max8660_subdev_data max8660_v6_subdev_data = {
 	.id		= MAX8660_V6,
 	.name		= "vmmc",
 	.platform_data	= &vcc_mmc_init_data,
@@ -1041,12 +1056,17 @@ static void __init raumfeld_common_init(void)
 	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
 }
 
-static void __init raumfeld_controller_init(void)
+static void __init __maybe_unused raumfeld_controller_init(void)
 {
 	int ret;
 
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+
+	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+	device_add_property_set(&rotary_encoder_device.dev,
+				&raumfeld_rotary_property_set);
 	platform_device_register(&rotary_encoder_device);
+
 	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
 	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
 
@@ -1062,7 +1082,7 @@ static void __init raumfeld_controller_init(void)
 	raumfeld_w1_init();
 }
 
-static void __init raumfeld_connector_init(void)
+static void __init __maybe_unused raumfeld_connector_init(void)
 {
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
 	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
@@ -1074,13 +1094,17 @@ static void __init raumfeld_connector_init(void)
 	raumfeld_common_init();
 }
 
-static void __init raumfeld_speaker_init(void)
+static void __init __maybe_unused raumfeld_speaker_init(void)
 {
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
 	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
 	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
 
 	platform_device_register(&smc91x_device);
+
+	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
+	device_add_property_set(&rotary_encoder_device.dev,
+				&raumfeld_rotary_property_set);
 	platform_device_register(&rotary_encoder_device);
 
 	raumfeld_audio_init();
diff --git a/arch/arm/mach-pxa/include/mach/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h
index f0e4a589bbe1..f0e4a589bbe1 100644
--- a/arch/arm/mach-pxa/include/mach/regs-rtc.h
+++ b/arch/arm/mach-pxa/regs-rtc.h
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h
index c15c0c57de08..c15c0c57de08 100644
--- a/arch/arm/mach-pxa/include/mach/regs-u2d.h
+++ b/arch/arm/mach-pxa/regs-u2d.h
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 710c493eac89..1414b5f29114 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 #include <linux/platform_data/video-pxafb.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index bdc0c41bc4fd..b80eab9993c5 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -27,10 +27,10 @@
 #include <linux/io.h>
 
 #include <asm/mach-types.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/pxa2xx-regs.h>
-#include <mach/regs-rtc.h>
-#include <mach/sharpsl_pm.h>
+#include "regs-rtc.h"
+#include "sharpsl_pm.h"
 
 /*
  * Constants
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h b/arch/arm/mach-pxa/sharpsl_pm.h
index 905be6755f04..905be6755f04 100644
--- a/arch/arm/mach-pxa/include/mach/sharpsl_pm.h
+++ b/arch/arm/mach-pxa/sharpsl_pm.h
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f4e2e2719580..d9578bc49fdc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -40,15 +40,15 @@
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
 
-#include <mach/pxa27x.h>
-#include <mach/pxa27x-udc.h>
+#include "pxa27x.h"
+#include "pxa27x-udc.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/spitz.h>
-#include <mach/sharpsl_pm.h>
+#include "sharpsl_pm.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
@@ -201,7 +201,7 @@ static void __init spitz_scoop_init(void)
 }
 
 /* Power control is shared with between one of the CF slots and SD */
-static void spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
+static void __maybe_unused spitz_card_pwr_ctrl(uint8_t enable, uint8_t new_cpr)
 {
 	unsigned short cpr;
 	unsigned long flags;
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index e191f9996b26..ea9f9034cb54 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -25,8 +25,8 @@
 #include <mach/hardware.h>
 
 #include <mach/spitz.h>
-#include <mach/pxa27x.h>
-#include <mach/sharpsl_pm.h>
+#include "pxa27x.h"
+#include "sharpsl_pm.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 01de542432a6..702f4f14b708 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -43,10 +43,10 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/pxa27x-udc.h>
+#include "udc.h"
+#include "pxa27x-udc.h"
 #include <mach/smemc.h>
 
 #include <linux/spi/spi.h>
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index a71da84e784b..4b38e821ac9c 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -18,12 +18,13 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/smc91x.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa930.h>
+#include "pxa930.h"
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/keypad-pxa27x.h>
 
@@ -168,21 +169,24 @@ static inline void tavorevb_init_keypad(void) {}
 #endif /* CONFIG_KEYBOARD_PXA27x || CONFIG_KEYBOARD_PXA27x_MODULE */
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup tavorevb_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.0", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.1", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data tavorevb_backlight_data[] = {
 	[0] = {
 		/* primary backlight */
-		.pwm_id		= 2,
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
 		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* secondary backlight */
-		.pwm_id		= 0,
 		.max_brightness	= 100,
 		.dft_brightness	= 100,
-		.pwm_period_ns	= 100000,
 		.enable_gpio	= -1,
 	},
 };
@@ -470,6 +474,7 @@ static struct pxafb_mach_info tavorevb_lcd_info = {
 
 static void __init tavorevb_init_lcd(void)
 {
+	pwm_add_table(tavorevb_pwm_lookup, ARRAY_SIZE(tavorevb_pwm_lookup));
 	platform_device_register(&tavorevb_backlight_devices[0]);
 	platform_device_register(&tavorevb_backlight_devices[1]);
 	pxa_set_fb_info(NULL, &tavorevb_lcd_info);
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index e0a53208880a..107f37210fb9 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -16,7 +16,7 @@
 #include <linux/delay.h>
 #include <linux/rfkill.h>
 
-#include <mach/tosa_bt.h>
+#include "tosa_bt.h"
 
 static void tosa_bt_on(struct tosa_bt_data *data)
 {
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e6e27c0468e4..13de6602966f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -43,12 +43,12 @@
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/reset.h>
 #include <linux/platform_data/irda-pxaficp.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/udc.h>
-#include <mach/tosa_bt.h>
+#include "udc.h"
+#include "tosa_bt.h"
 #include <mach/audio.h>
 #include <mach/smemc.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/tosa_bt.h
index efc3c3d3b75d..efc3c3d3b75d 100644
--- a/arch/arm/mach-pxa/include/mach/tosa_bt.h
+++ b/arch/arm/mach-pxa/tosa_bt.h
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 066e3a250ee0..ea78bc5c4198 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -41,7 +41,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/udc.h
index 9a827e32db98..9a827e32db98 100644
--- a/arch/arm/mach-pxa/include/mach/udc.h
+++ b/arch/arm/mach-pxa/udc.h
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 8ab26370107e..8e89d91b206b 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -39,6 +39,7 @@
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/usb/isp116x.h>
 #include <linux/mtd/mtd.h>
@@ -46,12 +47,12 @@
 #include <linux/mtd/physmap.h>
 #include <linux/syscore_ops.h>
 
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <mach/regs-uart.h>
 #include <linux/platform_data/pcmcia-pxa2xx_viper.h>
-#include <mach/viper.h>
+#include "viper.h"
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -350,6 +351,11 @@ static struct pxafb_mach_info fb_info = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+static struct pwm_lookup viper_pwm_lookup[] = {
+	PWM_LOOKUP("pxa25x-pwm.0", 0, "pwm-backlight.0", NULL, 1000000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int viper_backlight_init(struct device *dev)
 {
 	int ret;
@@ -398,10 +404,8 @@ static void viper_backlight_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data viper_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 1000000,
 	.enable_gpio	= -1,
 	.init		= viper_backlight_init,
 	.notify		= viper_backlight_notify,
@@ -939,6 +943,7 @@ static void __init viper_init(void)
 		smc91x_device.num_resources--;
 
 	pxa_set_i2c_info(NULL);
+	pwm_add_table(viper_pwm_lookup, ARRAY_SIZE(viper_pwm_lookup));
 	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
 
 	viper_init_vcore_gpios();
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/viper.h
index 5f5fbf1f6489..5f5fbf1f6489 100644
--- a/arch/arm/mach-pxa/include/mach/viper.h
+++ b/arch/arm/mach-pxa/viper.h
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 54122a983ae3..c006ee902a8f 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -31,14 +31,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/audio.h>
 #include <mach/vpac270.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
 #include <linux/platform_data/ata-pxa.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 13b1d4586d7d..3f06cd90567a 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -28,7 +28,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
-#include <mach/pxa25x.h>
+#include "pxa25x.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index e1a121b36cfa..510e533871f3 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/z2_battery.h>
 #include <linux/dma-mapping.h>
@@ -34,13 +35,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/pxa27x.h>
-#include <mach/mfp-pxa27x.h>
+#include "pxa27x.h"
+#include "mfp-pxa27x.h"
 #include <mach/z2.h>
 #include <linux/platform_data/video-pxafb.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <mach/pm.h>
+#include "pm.h"
 
 #include "generic.h"
 #include "devices.h"
@@ -199,21 +200,24 @@ static inline void z2_nor_init(void) {}
  * Backlight
  ******************************************************************************/
 #if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct pwm_lookup z2_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight.0", NULL, 1260320,
+		   PWM_POLARITY_NORMAL),
+	PWM_LOOKUP("pxa27x-pwm.0", 1, "pwm-backlight.1", NULL, 1260320,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data z2_backlight_data[] = {
 	[0] = {
 		/* Keypad Backlight */
-		.pwm_id		= 1,
 		.max_brightness	= 1023,
 		.dft_brightness	= 0,
-		.pwm_period_ns	= 1260320,
 		.enable_gpio	= -1,
 	},
 	[1] = {
 		/* LCD Backlight */
-		.pwm_id		= 2,
 		.max_brightness	= 1023,
 		.dft_brightness	= 512,
-		.pwm_period_ns	= 1260320,
 		.enable_gpio	= -1,
 	},
 };
@@ -236,6 +240,7 @@ static struct platform_device z2_backlight_devices[2] = {
 };
 static void __init z2_pwm_init(void)
 {
+	pwm_add_table(z2_pwm_lookup, ARRAY_SIZE(z2_pwm_lookup));
 	platform_device_register(&z2_backlight_devices[0]);
 	platform_device_register(&z2_backlight_devices[1]);
 }
@@ -595,13 +600,11 @@ static struct spi_board_info spi_board_info[] __initdata = {
 };
 
 static struct pxa2xx_spi_master pxa_ssp1_master_info = {
-	.clock_enable	= CKEN_SSP,
 	.num_chipselect	= 1,
 	.enable_dma	= 1,
 };
 
 static struct pxa2xx_spi_master pxa_ssp2_master_info = {
-	.clock_enable	= CKEN_SSP2,
 	.num_chipselect	= 1,
 };
 
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 30e62a3f0701..3b94ecfb9426 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -38,17 +38,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/pxa27x.h>
+#include "pxa27x.h"
 #include <mach/regs-uart.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
-#include <mach/pxa27x-udc.h>
-#include <mach/udc.h>
+#include "pxa27x-udc.h"
+#include "udc.h"
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/pm.h>
+#include "pm.h"
 #include <mach/audio.h>
 #include <linux/platform_data/pcmcia-pxa2xx_viper.h>
-#include <mach/zeus.h>
+#include "zeus.h"
 #include <mach/smemc.h>
 
 #include "generic.h"
@@ -910,7 +910,7 @@ static void __init zeus_map_io(void)
 	PMCR = PSPR = 0;
 
 	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
-	OSCC |= OSCC_OON;
+	writel(readl(OSCC) | OSCC_OON, OSCC);
 
 	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
 	 * float chip selects and PCMCIA */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/zeus.h
index 56024f81d57e..56024f81d57e 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/zeus.h
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 77daea478e88..3642389b301a 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,15 +19,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/pxa3xx.h>
+#include "pxa3xx.h"
 #include <mach/audio.h>
 #include <linux/platform_data/video-pxafb.h>
-#include <mach/zylonite.h>
+#include "zylonite.h"
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
@@ -120,11 +121,14 @@ static inline void zylonite_init_leds(void) {}
 #endif
 
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pwm_lookup zylonite_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 1, "pwm-backlight.0", NULL, 10000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
-	.pwm_id		= 3,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 10000,
 	.enable_gpio	= -1,
 };
 
@@ -206,6 +210,7 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 
 static void __init zylonite_init_lcd(void)
 {
+	pwm_add_table(zylonite_pwm_lookup, ARRAY_SIZE(zylonite_pwm_lookup));
 	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/zylonite.h
index ecca976f03d2..ecca976f03d2 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/zylonite.h
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 869bce7c3f24..e247acf1400a 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,8 +21,8 @@
 #include <linux/platform_data/pca953x.h>
 #include <linux/gpio.h>
 
-#include <mach/pxa300.h>
-#include <mach/zylonite.h>
+#include "pxa300.h"
+#include "zylonite.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 9942bac4cf7d..47961ae0c448 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -18,8 +18,8 @@
 #include <linux/init.h>
 #include <linux/gpio.h>
 
-#include <mach/pxa320.h>
-#include <mach/zylonite.h>
+#include "pxa320.h"
+#include "zylonite.h"
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
index 2256cd1e25d1..73494500b51c 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_QCOM
-	bool "Qualcomm Support" if ARCH_MULTI_V7
+	bool "Qualcomm Support"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_GIC
 	select ARM_AMBA
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 5cde63a64b34..5494c9e0c909 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -49,7 +49,7 @@ extern void secondary_startup_arm(void);
 static DEFINE_SPINLOCK(boot_lock);
 
 #ifdef CONFIG_HOTPLUG_CPU
-static void __ref qcom_cpu_die(unsigned int cpu)
+static void qcom_cpu_die(unsigned int cpu)
 {
 	wfi();
 }
@@ -332,7 +332,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-static struct smp_operations smp_msm8660_ops __initdata = {
+static const struct smp_operations smp_msm8660_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= msm8660_boot_secondary,
@@ -342,7 +342,7 @@ static struct smp_operations smp_msm8660_ops __initdata = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
 
-static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
+static const struct smp_operations qcom_smp_kpssv1_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= kpssv1_boot_secondary,
@@ -352,7 +352,7 @@ static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
 };
 CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
 
-static struct smp_operations qcom_smp_kpssv2_ops __initdata = {
+static const struct smp_operations qcom_smp_kpssv2_ops __initconst = {
 	.smp_prepare_cpus	= qcom_smp_prepare_cpus,
 	.smp_secondary_init	= qcom_secondary_init,
 	.smp_boot_secondary	= kpssv2_boot_secondary,
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 565925f37dc5..70ab4a25a5f8 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -1,13 +1,30 @@
-menu "RealView platform type"
-	depends on ARCH_REALVIEW
+menuconfig ARCH_REALVIEW
+	bool "ARM Ltd. RealView family"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select COMMON_CLK_VERSATILE
+	select GPIO_PL061 if GPIOLIB
+	select ICST
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
+	help
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
 
 config REALVIEW_DT
 	bool "Support RealView(R) Device Tree based boot"
 	select ARM_GIC
+	select CLK_SP810
+	select HAVE_SMP
+	select ICST
+	select MACH_REALVIEW_EB if ARCH_MULTI_V5
 	select MFD_SYSCON
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
 	select POWER_SUPPLY
+	select SMP_ON_UP if SMP
 	select SOC_REALVIEW
 	select USE_OF
 	help
@@ -17,14 +34,32 @@ config REALVIEW_DT
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC
+	select CPU_ARM926T if ARCH_MULTI_V5
 	help
 	  Include support for the ARM(R) RealView(R) Emulation Baseboard
-	  platform.
+	  platform. On an ARMv5 kernel, this will include support for
+	  the ARM926EJ-S core tile, while on an ARMv6/v7 kernel, at least
+	  one of the ARM1136, ARM1176, ARM11MPCore or Cortex-A9MPCore
+	  core tile options should be enabled.
+
+config REALVIEW_EB_ARM1136
+	bool "Support ARM1136J(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	select CPU_V6
+	help
+	  Enable support for the ARM1136 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
+
+config REALVIEW_EB_ARM1176
+	bool "Support ARM1176JZ(F)-S Tile"
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
+	help
+	  Enable support for the ARM1176 tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
 
 config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
-	depends on MACH_REALVIEW_EB
-	select CPU_V7
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
@@ -35,9 +70,7 @@ config REALVIEW_EB_A9MP
 
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
-	depends on MACH_REALVIEW_EB
-	select ARCH_HAS_BARRIERS if SMP
-	select CPU_V6K
+	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
@@ -48,7 +81,7 @@ config REALVIEW_EB_ARM11MP
 
 config REALVIEW_EB_ARM11MP_REVB
 	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP
+	depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
 	help
 	  Enable support for the ARM11MPCore Revision B tile on the
 	  Realview(R) Emulation Baseboard platform. Since there are device
@@ -57,9 +90,8 @@ config REALVIEW_EB_ARM11MP_REVB
 
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	select ARCH_HAS_BARRIERS if SMP
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
-	select CPU_V6K
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
@@ -73,6 +105,7 @@ config MACH_REALVIEW_PB11MP
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
+	depends on ARCH_MULTI_V6
 	select ARM_GIC
 	select CPU_V6
 	select HAVE_TCM
@@ -92,8 +125,8 @@ config REALVIEW_PB1176_SECURE_FLASH
 
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
@@ -101,15 +134,15 @@ config MACH_REALVIEW_PBA8
 	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PBX
-	bool "Support RealView(R) Platform Baseboard Explore"
-	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
+	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ZONE_DMA if SPARSEMEM
+	select ZONE_DMA
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard
 	  Explore.
@@ -124,6 +157,6 @@ config REALVIEW_HIGH_PHYS_OFFSET
 	  the board supports 512MB of RAM, this option allows the
 	  memory to be accessed contiguously at the high physical
 	  offset. On the PBX board, disabling this option allows 1GB of
-	  RAM to be used with SPARSEMEM.
+	  RAM to be used with HIGHMEM.
 
-endmenu
+endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index e07fdf7ae8a7..dae8d86ef4cc 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -1,13 +1,19 @@
 #
 # Makefile for the linux kernel.
 #
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+	-I$(srctree)/arch/arm/plat-versatile/include
 
 obj-y					:= core.o
 obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
+obj-$(CONFIG_SMP)			+= platsmp-dt.o
+
+ifdef CONFIG_ATAGS
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
 obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
 obj-$(CONFIG_SMP)			+= platsmp.o
+endif
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot
deleted file mode 100644
index d2c3d788f688..000000000000
--- a/arch/arm/mach-realview/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70800000
-else
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-endif
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/board-eb.h
index a301e61a5554..a850ae6945b0 100644
--- a/arch/arm/mach-realview/include/mach/board-eb.h
+++ b/arch/arm/mach-realview/board-eb.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-eb.h
- *
  * Copyright (C) 2007 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_EB_H
 #define __ASM_ARCH_BOARD_EB_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * RealView EB + ARM11MPCore peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h
index 2a15fef94730..29c04a9e1344 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/board-pb1176.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pb1176.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PB1176_H
 #define __ASM_ARCH_BOARD_PB1176_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h
index aa2d4e02ea2c..b16e6e85e92d 100644
--- a/arch/arm/mach-realview/include/mach/board-pb11mp.h
+++ b/arch/arm/mach-realview/board-pb11mp.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pb11mp.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PB11MP_H
 #define __ASM_ARCH_BOARD_PB11MP_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pba8.h b/arch/arm/mach-realview/board-pba8.h
index 4dfc67a4f45f..6a1391f50373 100644
--- a/arch/arm/mach-realview/include/mach/board-pba8.h
+++ b/arch/arm/mach-realview/board-pba8.h
@@ -1,6 +1,4 @@
 /*
- * include/asm-arm/arch-realview/board-pba8.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,7 +19,7 @@
 #ifndef __ASM_ARCH_BOARD_PBA8_H
 #define __ASM_ARCH_BOARD_PBA8_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/include/mach/board-pbx.h b/arch/arm/mach-realview/board-pbx.h
index 848bfff6d8f1..5cda480b12bb 100644
--- a/arch/arm/mach-realview/include/mach/board-pbx.h
+++ b/arch/arm/mach-realview/board-pbx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/board-pbx.h
- *
  * Copyright (C) 2009 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -20,7 +18,7 @@
 #ifndef __ASM_ARCH_BOARD_PBX_H
 #define __ASM_ARCH_BOARD_PBX_H
 
-#include <mach/platform.h>
+#include "platform.h"
 
 /*
  * Peripheral addresses
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 44575edc44b1..baf174542e36 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -36,8 +36,7 @@
 #include <linux/memblock.h>
 
 #include <clocksource/timer-sp804.h>
-
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst.h>
@@ -46,8 +45,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <mach/platform.h>
-#include <mach/irqs.h>
+#include "platform.h"
 
 #include <plat/sched_clock.h>
 
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 868ece221978..05a995ea16d3 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -1,6 +1,4 @@
 /*
- *  linux/arch/arm/mach-realview/core.h
- *
  *  Copyright (C) 2004 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *
@@ -54,7 +52,7 @@ extern int realview_usb_register(struct resource *res);
 extern void realview_init_early(void);
 extern void realview_fixup(struct tag *tags, char **from);
 
-extern struct smp_operations realview_smp_ops;
+extern const struct smp_operations realview_smp_ops;
 extern void realview_cpu_die(unsigned int cpu);
 
 #endif
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/hardware.h
index 281e71c97525..957a230aadf4 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/hardware.h
@@ -1,6 +1,4 @@
 /*
- *  arch/arm/mach-realview/include/mach/hardware.h
- *
  *  This file contains the hardware definitions of the RealView boards.
  *
  *  Copyright (C) 2003 ARM Limited.
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index ac22dd41b135..968e2d1964f6 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -90,7 +90,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
  *
  * Called with IRQs disabled
  */
-void __ref realview_cpu_die(unsigned int cpu)
+void realview_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h
deleted file mode 100644
index 9a732195aa1c..000000000000
--- a/arch/arm/mach-realview/include/mach/barriers.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * Barriers redefined for RealView ARM11MPCore platforms with L220 cache
- * controller to work around hardware errata causing the outer_sync()
- * operation to deadlock the system.
- */
-#define mb()		dsb()
-#define rmb()		dsb()
-#define wmb()		mb()
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
deleted file mode 100644
index 78854f2fa323..000000000000
--- a/arch/arm/mach-realview/include/mach/irqs.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <mach/irqs-eb.h>
-#include <mach/irqs-pb11mp.h>
-#include <mach/irqs-pb1176.h>
-#include <mach/irqs-pba8.h>
-#include <mach/irqs-pbx.h>
-
-#define IRQ_LOCALTIMER		29
-#define IRQ_LOCALWDOG		30
-
-#define IRQ_GIC_START		32
-
-#ifndef NR_IRQS
-#error "NR_IRQS not defined by the board-specific files"
-#endif
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
deleted file mode 100644
index 23e7a313f75d..000000000000
--- a/arch/arm/mach-realview/include/mach/memory.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/memory.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#ifdef CONFIG_SPARSEMEM
-
-/*
- * Sparsemem definitions for RealView PBX.
- *
- * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
- * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
- * may be used for DMA.
- *
- * The macros below define a section size of 256MB and a non-linear virtual to
- * physical mapping:
- *
- * 256MB @ 0x00000000 -> PAGE_OFFSET
- * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
- * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
- */
-#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
-#endif
-
-#define MAX_PHYSMEM_BITS	32
-#define SECTION_SIZE_BITS	28
-
-/* bank page offsets */
-#define PAGE_OFFSET1	(PAGE_OFFSET + 0x10000000)
-#define PAGE_OFFSET2	(PAGE_OFFSET + 0x30000000)
-
-#define PHYS_OFFSET PLAT_PHYS_OFFSET
-
-#define __phys_to_virt(phys)						\
-	((phys) >= 0x80000000 ?	(phys) - 0x80000000 + PAGE_OFFSET2 :	\
-	 (phys) >= 0x20000000 ?	(phys) - 0x20000000 + PAGE_OFFSET1 :	\
-	 (phys) + PAGE_OFFSET)
-
-#define __virt_to_phys(virt)						\
-	 ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 :	\
-	  (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 :	\
-	  (virt) - PAGE_OFFSET)
-
-#endif	/* CONFIG_SPARSEMEM */
-
-#endif
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
deleted file mode 100644
index cfa30d21783b..000000000000
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
-#include <mach/board-pbx.h>
-
-#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
-#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
-#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
-#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
-
-/*
- * Return the UART base address
- */
-static inline unsigned long get_uart_base(void)
-{
-	if (machine_is_realview_eb())
-		return REALVIEW_EB_UART0_BASE;
-	else if (machine_is_realview_pb11mp())
-		return REALVIEW_PB11MP_UART0_BASE;
-	else if (machine_is_realview_pb1176())
-		return REALVIEW_PB1176_UART0_BASE;
-	else if (machine_is_realview_pba8())
-		return REALVIEW_PBA8_UART0_BASE;
-	else if (machine_is_realview_pbx())
-		return REALVIEW_PBX_UART0_BASE;
-	else
-		return 0;
-}
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR(base) = c;
-}
-
-static inline void flush(void)
-{
-	unsigned long base = get_uart_base();
-
-	while (AMBA_UART_FR(base) & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-realview/include/mach/irqs-eb.h b/arch/arm/mach-realview/irqs-eb.h
index 44754230fdcc..61e31680a749 100644
--- a/arch/arm/mach-realview/include/mach/irqs-eb.h
+++ b/arch/arm/mach-realview/irqs-eb.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-eb.h
- *
  * Copyright (C) 2007 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,6 +19,7 @@
 #ifndef __MACH_IRQS_EB_H
 #define __MACH_IRQS_EB_H
 
+#define IRQ_LOCALTIMER		29
 #define IRQ_EB_GIC_START	32
 
 /*
@@ -112,21 +111,4 @@
 
 #define NR_GIC_EB11MP		2
 
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 128)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
-	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
-	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_EB11MP
-#endif
-
 #endif	/* __MACH_IRQS_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/irqs-pb1176.h
index 708f84156f2c..778edfd430e7 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/irqs-pb1176.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pb1176.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -76,25 +74,4 @@
 
 #define IRQ_PB1176_SCTL		-1
 
-#define NR_GIC_PB1176		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB1176
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
-
 #endif	/* __MACH_IRQS_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h b/arch/arm/mach-realview/irqs-pb11mp.h
index 34e255add21e..938898a3df9f 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+++ b/arch/arm/mach-realview/irqs-pb11mp.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -21,6 +19,7 @@
 #ifndef __MACH_IRQS_PB11MP_H
 #define __MACH_IRQS_PB11MP_H
 
+#define IRQ_LOCALTIMER				29
 #define IRQ_TC11MP_GIC_START			32
 #define IRQ_PB11MP_GIC_START			64
 
@@ -95,28 +94,4 @@
 #define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
 
-#define IRQ_PB11MP_SMC		-1
-#define IRQ_PB11MP_SCTL		-1
-
-#define NR_GIC_PB11MP		2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PB11MP
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
-
 #endif	/* __MACH_IRQS_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pba8.h b/arch/arm/mach-realview/irqs-pba8.h
index 4a88a4edb651..262e321938b8 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pba8.h
+++ b/arch/arm/mach-realview/irqs-pba8.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pba8.h
- *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -70,25 +68,4 @@
 #define IRQ_PBA8_SMC		-1
 #define IRQ_PBA8_SCTL		-1
 
-#define NR_GIC_PBA8		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBA8
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBA8 */
-
 #endif	/* __MACH_IRQS_PBA8_H */
diff --git a/arch/arm/mach-realview/include/mach/irqs-pbx.h b/arch/arm/mach-realview/irqs-pbx.h
index 206a3001f46b..4ef0567dec32 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pbx.h
+++ b/arch/arm/mach-realview/irqs-pbx.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/irqs-pbx.h
- *
  * Copyright (C) 2009 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
@@ -20,6 +18,7 @@
 #ifndef __MACH_IRQS_PBX_H
 #define __MACH_IRQS_PBX_H
 
+#define IRQ_LOCALTIMER				29
 #define IRQ_PBX_GIC_START			32
 
 /*
@@ -85,25 +84,4 @@
 #define IRQ_PBX_SMC		-1
 #define IRQ_PBX_SCTL		-1
 
-#define NR_GIC_PBX		1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBX
- */
-#define NR_IRQS_PBX		(IRQ_PBX_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PBX)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
-#undef NR_IRQS
-#define NR_IRQS			NR_IRQS_PBX
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR		NR_GIC_PBX
-#endif
-
-#endif	/* CONFIG_MACH_REALVIEW_PBX */
-
 #endif	/* __MACH_IRQS_PBX_H */
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/platform.h
index 1b77a27badaf..11121739d371 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/platform.h
@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-realview/include/mach/platform.h
- *
  * Copyright (c) ARM Limited 2003.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c
new file mode 100644
index 000000000000..6964e8876061
--- /dev/null
+++ b/arch/arm/mach-realview/platsmp-dt.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2015 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+
+#include <plat/platsmp.h>
+
+#include "core.h"
+
+#define REALVIEW_SYS_FLAGSSET_OFFSET	0x30
+
+static const struct of_device_id realview_scu_match[] = {
+	{ .compatible = "arm,arm11mp-scu", },
+	{ .compatible = "arm,cortex-a9-scu", },
+	{ .compatible = "arm,cortex-a5-scu", },
+	{ }
+};
+
+static const struct of_device_id realview_syscon_match[] = {
+        { .compatible = "arm,core-module-integrator", },
+        { .compatible = "arm,realview-eb-syscon", },
+        { .compatible = "arm,realview-pb11mp-syscon", },
+        { .compatible = "arm,realview-pbx-syscon", },
+        { },
+};
+
+static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	void __iomem *scu_base;
+	struct regmap *map;
+	unsigned int ncores;
+	int i;
+
+	np = of_find_matching_node(NULL, realview_scu_match);
+	if (!np) {
+		pr_err("PLATSMP: No SCU base address\n");
+		return;
+	}
+	scu_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!scu_base) {
+		pr_err("PLATSMP: No SCU remap\n");
+		return;
+	}
+
+	scu_enable(scu_base);
+	ncores = scu_get_core_count(scu_base);
+	pr_info("SCU: %d cores detected\n", ncores);
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+	iounmap(scu_base);
+
+	/* The syscon contains the magic SMP start address registers */
+	np = of_find_matching_node(NULL, realview_syscon_match);
+	if (!np) {
+		pr_err("PLATSMP: No syscon match\n");
+		return;
+	}
+	map = syscon_node_to_regmap(np);
+	if (IS_ERR(map)) {
+		pr_err("PLATSMP: No syscon regmap\n");
+		return;
+	}
+	/* Put the boot address in this magic register */
+	regmap_write(map, REALVIEW_SYS_FLAGSSET_OFFSET,
+		     virt_to_phys(versatile_secondary_startup));
+}
+
+static const struct smp_operations realview_dt_smp_ops __initconst = {
+	.smp_prepare_cpus	= realview_smp_prepare_cpus,
+	.smp_secondary_init	= versatile_secondary_init,
+	.smp_boot_secondary	= versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= realview_cpu_die,
+#endif
+};
+CPU_METHOD_OF_DECLARE(realview_smp, "arm,realview-smp", &realview_dt_smp_ops);
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 98e3052b7933..e8ab69c7abfb 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -13,13 +13,13 @@
 #include <linux/smp.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/mach-types.h>
 #include <asm/smp_scu.h>
 
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pbx.h>
+#include "board-eb.h"
+#include "board-pb11mp.h"
+#include "board-pbx.h"
 
 #include <plat/platsmp.h>
 
@@ -75,7 +75,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 		     __io_address(REALVIEW_SYS_FLAGSSET));
 }
 
-struct smp_operations realview_smp_ops __initdata = {
+const struct smp_operations realview_smp_ops __initconst = {
 	.smp_init_cpus		= realview_smp_init_cpus,
 	.smp_prepare_cpus	= realview_smp_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
diff --git a/arch/arm/mach-realview/realview-dt.c b/arch/arm/mach-realview/realview-dt.c
index 382cc1b90519..88b67247945e 100644
--- a/arch/arm/mach-realview/realview-dt.c
+++ b/arch/arm/mach-realview/realview-dt.c
@@ -11,7 +11,6 @@
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
-#include "core.h"
 
 static const char *const realview_dt_platform_compat[] __initconst = {
 	"arm,realview-eb",
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index b3869cbbcc68..b442fa61e943 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,20 +31,21 @@
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_twd.h>
 #include <asm/system_info.h>
+#include <asm/outercache.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-eb.h>
-#include <mach/irqs.h>
+#include "board-eb.h"
+#include "irqs-eb.h"
 
 #include "core.h"
 
@@ -450,6 +451,12 @@ static void __init realview_eb_init(void)
 		 * Bits:  .... ...0 0111 1001 0000 .... .... ....
 		 */
 		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
+
+		/*
+		 * due to a bug in the l220 cache controller, we must not call
+		 * the sync function. stub it out here instead!
+		 */
+		outer_cache.sync = NULL;
 #endif
 		pmu_device.name = core_tile_a9mp() ? "armv7-pmu" : "armv6-pmu";
 		platform_device_register(&pmu_device);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ce92c1823494..537f3878d501 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -34,7 +34,7 @@
 #include <linux/reboot.h>
 #include <linux/memblock.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
@@ -45,8 +45,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/board-pb1176.h>
-#include <mach/irqs.h>
+#include "board-pb1176.h"
+#include "irqs-pb1176.h"
 
 #include "core.h"
 
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 15c45e25095f..a90a0752f157 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -31,7 +31,7 @@
 #include <linux/platform_data/clk-realview.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
@@ -42,9 +42,10 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <asm/outercache.h>
 
-#include <mach/board-pb11mp.h>
-#include <mach/irqs.h>
+#include "board-pb11mp.h"
+#include "irqs-pb11mp.h"
 
 #include "core.h"
 
@@ -345,6 +346,11 @@ static void __init realview_pb11mp_init(void)
 	 * Bits:  .... ...0 0111 1001 0000 .... .... ....
 	 */
 	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
+	/*
+	 * due to a bug in the l220 cache controller, we must not call
+	 * the sync function. stub it out here instead!
+	 */
+	outer_cache.sync = NULL;
 #endif
 
 	realview_flash_register(realview_pb11mp_flash_resource,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 4c64662f5437..ddafb67c2b6f 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/hardware.h>
-#include <mach/board-pba8.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "board-pba8.h"
+#include "irqs-pba8.h"
 
 #include "core.h"
 
@@ -77,14 +77,6 @@ static struct map_desc realview_pba8_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
-#ifdef CONFIG_PCI
-	{
-		.virtual	= PCIX_UNIT_BASE,
-		.pfn		= __phys_to_pfn(REALVIEW_PBA8_PCI_BASE),
-		.length		= REALVIEW_PBA8_PCI_BASE_SIZE,
-		.type		= MT_DEVICE
-	},
-#endif
 #ifdef CONFIG_DEBUG_LL
 	{
 		.virtual	= IO_ADDRESS(REALVIEW_PBA8_UART0_BASE),
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 9a22b864219f..b9f0757787ac 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <mach/hardware.h>
-#include <mach/board-pbx.h>
-#include <mach/irqs.h>
+#include "hardware.h"
+#include "board-pbx.h"
+#include "irqs-pbx.h"
 
 #include "core.h"
 
@@ -79,14 +79,6 @@ static struct map_desc realview_pbx_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
-#ifdef CONFIG_PCI
-	{
-		.virtual	= PCIX_UNIT_BASE,
-		.pfn		= __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
-		.length		= REALVIEW_PBX_PCI_BASE_SIZE,
-		.type		= MT_DEVICE,
-	},
-#endif
 #ifdef CONFIG_DEBUG_LL
 	{
 		.virtual	= IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ae4eb7cc4bcc..cef42fd886d1 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -1,5 +1,6 @@
 config ARCH_ROCKCHIP
-	bool "Rockchip RK2928 and RK3xxx SOCs" if ARCH_MULTI_V7
+	bool "Rockchip RK2928 and RK3xxx SOCs"
+	depends on ARCH_MULTI_V7
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
 	select ARCH_HAS_RESET_CONTROLLER
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 3e7a4b761a95..d42a07e33482 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -42,6 +42,7 @@ static int ncores;
 #define PMU_PWRDN_SCU		4
 
 static struct regmap *pmu;
+static int has_pmu = true;
 
 static int pmu_power_domain_is_on(int pd)
 {
@@ -89,20 +90,23 @@ static int pmu_set_power_domain(int pd, bool on)
 	if (!IS_ERR(rstc) && !on)
 		reset_control_assert(rstc);
 
-	ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
-	if (ret < 0) {
-		pr_err("%s: could not update power domain\n", __func__);
-		return ret;
-	}
-
-	ret = -1;
-	while (ret != on) {
-		ret = pmu_power_domain_is_on(pd);
+	if (has_pmu) {
+		ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
 		if (ret < 0) {
-			pr_err("%s: could not read power domain state\n",
+			pr_err("%s: could not update power domain\n",
 			       __func__);
 			return ret;
 		}
+
+		ret = -1;
+		while (ret != on) {
+			ret = pmu_power_domain_is_on(pd);
+			if (ret < 0) {
+				pr_err("%s: could not read power domain state\n",
+				       __func__);
+				return ret;
+			}
+		}
 	}
 
 	if (!IS_ERR(rstc)) {
@@ -122,7 +126,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
 
-	if (!sram_base_addr || !pmu) {
+	if (!sram_base_addr || (has_pmu && !pmu)) {
 		pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
 		return -ENXIO;
 	}
@@ -275,7 +279,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		return;
 	}
 
-	if (rockchip_smp_prepare_pmu())
+	if (has_pmu && rockchip_smp_prepare_pmu())
 		return;
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
@@ -318,6 +322,13 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		pmu_set_power_domain(0 + i, false);
 }
 
+static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)
+{
+	has_pmu = false;
+
+	rockchip_smp_prepare_cpus(max_cpus);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static int rockchip_cpu_kill(unsigned int cpu)
 {
@@ -340,7 +351,16 @@ static void rockchip_cpu_die(unsigned int cpu)
 }
 #endif
 
-static struct smp_operations rockchip_smp_ops __initdata = {
+static const struct smp_operations rk3036_smp_ops __initconst = {
+	.smp_prepare_cpus	= rk3036_smp_prepare_cpus,
+	.smp_boot_secondary	= rockchip_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= rockchip_cpu_kill,
+	.cpu_die		= rockchip_cpu_die,
+#endif
+};
+
+static const struct smp_operations rockchip_smp_ops __initconst = {
 	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
 	.smp_boot_secondary	= rockchip_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -349,4 +369,5 @@ static struct smp_operations rockchip_smp_ops __initdata = {
 #endif
 };
 
+CPU_METHOD_OF_DECLARE(rk3036_smp, "rockchip,rk3036-smp", &rk3036_smp_ops);
 CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 251c7b9c5f9b..3f07cc5dfe5f 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -82,6 +82,7 @@ static const char * const rockchip_board_dt_compat[] = {
 	"rockchip,rk3066a",
 	"rockchip,rk3066b",
 	"rockchip,rk3188",
+	"rockchip,rk3228",
 	"rockchip,rk3288",
 	NULL,
 };
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index 0fd4b0b8ef22..654a6f3f2547 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -76,7 +76,7 @@ int white;
 /*
  * This does not append a newline
  */
-static void putc(int c)
+static inline void putc(int c)
 {
 	extern void ll_write_char(char *, char c, char white);
 	int x,y;
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index ef68ecb27396..b91aee406c74 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -15,6 +15,7 @@ config PLAT_S3C24XX
 	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN
+	select COMMON_CLK
 	help
 	  Base platform code for any Samsung S3C24XX device
 
@@ -405,7 +406,7 @@ config MACH_S3C2416_DT
 
 endif	# CPU_S3C2416
 
-if CPU_S3C2440
+if CPU_S3C2440 || CPU_S3C2442
 
 config S3C2440_XTAL_12000000
 	bool
@@ -432,6 +433,9 @@ config S3C2440_PLL_16934400
 	default y if S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+endif
+
+if CPU_S3C2440
 
 comment "S3C2440 Boards"
 
@@ -460,7 +464,6 @@ config MACH_AT2440EVB
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
-	select EEPROM_AT24 if I2C
 	select LEDS_CLASS
 	select LEDS_TRIGGERS
 	select LEDS_TRIGGER_BACKLIGHT
diff --git a/arch/arm/mach-s3c24xx/include/mach/io.h b/arch/arm/mach-s3c24xx/include/mach/io.h
index 5dd1db4e2677..235c53647aa4 100644
--- a/arch/arm/mach-s3c24xx/include/mach/io.h
+++ b/arch/arm/mach-s3c24xx/include/mach/io.h
@@ -190,7 +190,7 @@ DECLARE_IO(int,l,"")
 	result;								\
 })
 
-#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)0 + (port)))
 
 #define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
 #define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
diff --git a/arch/arm/mach-s3c24xx/include/mach/map.h b/arch/arm/mach-s3c24xx/include/mach/map.h
index 444793f0f5f1..adc39043aa21 100644
--- a/arch/arm/mach-s3c24xx/include/mach/map.h
+++ b/arch/arm/mach-s3c24xx/include/mach/map.h
@@ -14,13 +14,6 @@
 #define __ASM_ARCH_MAP_H
 
 #include <plat/map-base.h>
-
-/*
- * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
- * So need to define it, and here is to avoid redefinition warning.
- */
-#define S3C_UART_OFFSET		(0x4000)
-
 #include <plat/map-s3c.h>
 
 /*
@@ -34,9 +27,6 @@
 #define S3C2410_PA_MEMCTRL	(0x48000000)
 #define S3C24XX_SZ_MEMCTRL	SZ_1M
 
-/* UARTs */
-#define S3C_VA_UARTx(uart)	(S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
 /* Timers */
 #define S3C2410_PA_TIMER	(0x51000000)
 #define S3C24XX_SZ_TIMER	SZ_1M
@@ -157,7 +147,6 @@
 
 #define S3C_PA_FB	    S3C2443_PA_FB
 #define S3C_PA_IIC          S3C2410_PA_IIC
-#define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2416_PA_HSMMC0
 #define S3C_PA_HSMMC1	    S3C2443_PA_HSMMC
diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
index 69459dbbdcad..712333fec589 100644
--- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
@@ -85,3 +85,17 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 
 static inline void s3c_pm_restored_gpios(void) { }
 static inline void samsung_pm_saved_gpios(void) { }
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+#ifdef CONFIG_PM_SLEEP
+#define s3c_irqwake_intallow	(1L << 30 | 0xfL)
+#define s3c_irqwake_eintallow	(0x0000fff0L)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index b91341ef2b2e..417b7a20c2d1 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -25,19 +25,10 @@
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
+#include <mach/pm-core.h>
 
 #include <asm/irq.h>
 
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow	= 1L << 30 | 0xfL;
-unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
-
 int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
 	unsigned long irqbit = 1 << data->hwirq;
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 6d1e0b9c5b27..27ae6877550f 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -154,6 +154,7 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
 #define ADC_NOM_CHG_DETECT_1A 6
 #define ADC_NOM_CHG_DETECT_USB 43
 
+#ifdef CONFIG_PCF50633_ADC
 static void
 gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
 {
@@ -174,6 +175,7 @@ gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
 
 	pcf50633_mbc_usb_curlim_set(pcf, ma);
 }
+#endif
 
 static struct delayed_work gta02_charger_work;
 static int gta02_usb_vbus_draw;
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index d40d4f5244c6..7ed78619217c 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
@@ -469,6 +470,11 @@ static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.ocr_avail     = MMC_VDD_32_33,
 };
 
+static struct pwm_lookup h1940_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 36296,
+		   PWM_POLARITY_NORMAL),
+};
+
 static int h1940_backlight_init(struct device *dev)
 {
 	gpio_request(S3C2410_GPB(0), "Backlight");
@@ -503,11 +509,8 @@ static void h1940_backlight_exit(struct device *dev)
 
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 0,
 	.max_brightness = 100,
 	.dft_brightness = 50,
-	/* tcnt = 0x31 */
-	.pwm_period_ns  = 36296,
 	.enable_gpio    = -1,
 	.init           = h1940_backlight_init,
 	.notify		= h1940_backlight_notify,
@@ -661,7 +664,7 @@ static void __init h1940_map_io(void)
 
 	/* Add latch gpio chip, set latch initial value */
 	h1940_latch_control(0, 0);
-	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
+	WARN_ON(gpiochip_add_data(&h1940_latch_gpiochip, NULL));
 }
 
 static void __init h1940_init_time(void)
@@ -725,6 +728,7 @@ static void __init h1940_init(void)
 	gpio_request(H1940_LATCH_SD_POWER, "SD power");
 	gpio_direction_output(H1940_LATCH_SD_POWER, 0);
 
+	pwm_add_table(h1940_pwm_lookup, ARRAY_SIZE(h1940_pwm_lookup));
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 
 	gpio_request(S3C2410_GPA(1), "Red LED blink");
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 1d35ff375a01..774c982a7b7e 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -375,6 +375,11 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 
 };
 
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct pwm_device *lcd_pwm;
 
 static void rx1950_lcd_power(int enable)
@@ -520,10 +525,8 @@ static int rx1950_backlight_notify(struct device *dev, int brightness)
 }
 
 static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.pwm_id = 0,
 	.max_brightness = 24,
 	.dft_brightness = 4,
-	.pwm_period_ns = 48000,
 	.enable_gpio = -1,
 	.init = rx1950_backlight_init,
 	.notify = rx1950_backlight_notify,
@@ -792,6 +795,7 @@ static void __init rx1950_init_machine(void)
 	gpio_direction_output(S3C2410_GPA(4), 0);
 	gpio_direction_output(S3C2410_GPJ(6), 0);
 
+	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
 
 	i2c_register_board_info(0, rx1950_i2c_devices,
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index a19460e6e7b0..b355fca6cc2e 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -20,7 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
-static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+static struct cpufreq_frequency_table s3c2440_plls_12[] = {
 	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
 	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
 	{ .frequency = 90000000,	.driver_data = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 1191b2905625..be9a248b5ce9 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -20,7 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
-static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
 	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
 	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
 	{ .frequency = 90115200,	.driver_data = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 28c7097e8506..e5c1888fc67b 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -2,6 +2,27 @@
 #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
 # Licensed under GPLv2
+menuconfig ARCH_S3C64XX
+	bool "Samsung S3C64XX"
+	depends on ARCH_MULTI_V6
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK_SAMSUNG
+	select GPIO_SAMSUNG if ATAGS
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_TCM
+	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS if PM
+	select S3C_DEV_NAND if ATAGS
+	select S3C_GPIO_TRACK if ATAGS
+	select SAMSUNG_ATAGS if ATAGS
+	select SAMSUNG_WAKEMASK if PM
+	select SAMSUNG_WDT_RESET
+	help
+	  Samsung S3C64XX series based systems
 
 if ARCH_S3C64XX
 
@@ -90,6 +111,7 @@ config S3C64XX_SETUP_USB_PHY
 
 config MACH_SMDK6400
        bool "SMDK6400"
+	depends on ATAGS
 	select CPU_S3C6400
 	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_HSMMC1
@@ -100,6 +122,7 @@ config MACH_SMDK6400
 
 config MACH_ANW6410
 	bool "A&W6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -108,6 +131,7 @@ config MACH_ANW6410
 
 config MACH_MINI6410
 	bool "MINI6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -123,6 +147,7 @@ config MACH_MINI6410
 
 config MACH_REAL6410
 	bool "REAL6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
@@ -138,6 +163,7 @@ config MACH_REAL6410
 
 config MACH_SMDK6410
 	bool "SMDK6410"
+	depends on ATAGS
 	select CPU_S3C6410
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select S3C64XX_SETUP_FB_24BPP
@@ -225,6 +251,7 @@ config SMDK6410_WM1192_EV1
 
 config MACH_NCP
 	bool "NCP"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_I2C1
 	select S3C_DEV_HSMMC1
@@ -234,6 +261,7 @@ config MACH_NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
+	depends on ATAGS
 	select CPU_S3C6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
@@ -265,18 +293,21 @@ config MACH_SMARTQ
 
 config MACH_SMARTQ5
 	bool "SmartQ 5"
+	depends on ATAGS
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 5
 
 config MACH_SMARTQ7
 	bool "SmartQ 7"
+	depends on ATAGS
 	select MACH_SMARTQ
 	help
 	    Machine support for the SmartQ 7
 
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
+	depends on ATAGS
 	depends on I2C=y
 	select CPU_S3C6410
 	select LEDS_GPIO_REGISTER
@@ -310,7 +341,6 @@ config MACH_S3C64XX_DT
 	select CPU_S3C6410
 	select PINCTRL
 	select PINCTRL_S3C64XX
-	select USE_OF
 	help
 	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
 	  enabled.
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index bb233f342f31..256cd5b40c60 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -5,21 +5,25 @@
 #
 # Licensed under GPLv2
 
-# Core
-
-obj-y				+= common.o
-
-# Core support
-
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
-obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
+asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
 
 # PM
 
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM_SLEEP)		+= irq-pm.o sleep.o
+obj-$(CONFIG_PM_SLEEP)		+= sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
+ifdef CONFIG_SAMSUNG_ATAGS
+
+obj-$(CONFIG_PM_SLEEP)          += irq-pm.o
+
+# Core
+
+obj-y				+= common.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
 # DMA support
 
 obj-$(CONFIG_S3C64XX_PL080)	+= pl080.o
@@ -55,4 +59,6 @@ obj-$(CONFIG_MACH_SMARTQ7)		+= mach-smartq7.o
 obj-$(CONFIG_MACH_SMDK6400)		+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)		+= mach-smdk6410.o
 obj-$(CONFIG_MACH_WLF_CRAGG_6410)	+= mach-crag6410.o mach-crag6410-module.o
+endif
+
 obj-$(CONFIG_MACH_S3C64XX_DT)		+= mach-s3c64xx-dt.o
diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
deleted file mode 100644
index c642333af3ed..000000000000
--- a/arch/arm/mach-s3c64xx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x50008000
-params_phys-y	:= 0x50000100
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index ddb30b8434c5..7c66ce1a6bb6 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -39,6 +39,7 @@
 #include <asm/system_misc.h>
 
 #include <mach/map.h>
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
@@ -208,7 +209,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 static __init int s3c64xx_dev_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	subsys_system_register(&s3c64xx_subsys, NULL);
@@ -413,7 +414,7 @@ static int __init s3c64xx_init_irq_eint(void)
 	int irq;
 
 	/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return -ENODEV;
 
 	for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 93aa8cb70195..5322db51150e 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -18,6 +18,7 @@
 
 #include <asm/cpuidle.h>
 
+#include <plat/cpu.h>
 #include <mach/map.h>
 
 #include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
 
 static int __init s3c64xx_init_cpuidle(void)
 {
-	return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+	if (soc_is_s3c64xx())
+		return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+	return 0;
 }
 device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
index ff780a8d8366..b57783371d52 100644
--- a/arch/arm/mach-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -54,12 +54,13 @@ static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_I2S0_OUT),
-	[2] = DEFINE_RES_DMA(DMACH_I2S0_IN),
 };
 
-static struct s3c_audio_pdata i2sv3_pdata = {
+static struct s3c_audio_pdata i2s0_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_I2S0_OUT,
+	.dma_capture = DMACH_I2S0_IN,
 };
 
 struct platform_device s3c64xx_device_iis0 = {
@@ -68,15 +69,20 @@ struct platform_device s3c64xx_device_iis0 = {
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
 	.resource	  = s3c64xx_iis0_resource,
 	.dev = {
-		.platform_data = &i2sv3_pdata,
+		.platform_data = &i2s0_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis0);
 
 static struct resource s3c64xx_iis1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_IIS1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_I2S1_OUT),
-	[2] = DEFINE_RES_DMA(DMACH_I2S1_IN),
+};
+
+static struct s3c_audio_pdata i2s1_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_I2S1_OUT,
+	.dma_capture = DMACH_I2S1_IN,
 };
 
 struct platform_device s3c64xx_device_iis1 = {
@@ -85,19 +91,20 @@ struct platform_device s3c64xx_device_iis1 = {
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
 	.resource	  = s3c64xx_iis1_resource,
 	.dev = {
-		.platform_data = &i2sv3_pdata,
+		.platform_data = &i2s1_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis1);
 
 static struct resource s3c64xx_iisv4_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_IISV4, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_TX),
-	[2] = DEFINE_RES_DMA(DMACH_HSI_I2SV40_RX),
 };
 
 static struct s3c_audio_pdata i2sv4_pdata = {
 	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_HSI_I2SV40_TX,
+	.dma_capture = DMACH_HSI_I2SV40_RX,
 	.type = {
 		.i2s = {
 			.quirks = QUIRK_PRI_6CHAN,
@@ -142,12 +149,13 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
 
 static struct resource s3c64xx_pcm0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm0_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_capture = DMACH_PCM0_RX,
+	.dma_playback = DMACH_PCM0_TX,
 };
 
 struct platform_device s3c64xx_device_pcm0 = {
@@ -163,12 +171,13 @@ EXPORT_SYMBOL(s3c64xx_device_pcm0);
 
 static struct resource s3c64xx_pcm1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_PCM1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
 };
 
 static struct s3c_audio_pdata s3c_pcm1_pdata = {
 	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+	.dma_filter = pl08x_filter_id,
+	.dma_playback = DMACH_PCM1_TX,
+	.dma_capture = DMACH_PCM1_RX,
 };
 
 struct platform_device s3c64xx_device_pcm1 = {
@@ -196,13 +205,15 @@ static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
 
 static struct resource s3c64xx_ac97_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C64XX_PA_AC97, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
-	[2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
-	[3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
-	[4] = DEFINE_RES_IRQ(IRQ_AC97),
+	[1] = DEFINE_RES_IRQ(IRQ_AC97),
 };
 
-static struct s3c_audio_pdata s3c_ac97_pdata;
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.dma_playback = DMACH_AC97_PCMOUT,
+	.dma_filter = pl08x_filter_id,
+	.dma_capture = DMACH_AC97_PCMIN,
+	.dma_capture_mic = DMACH_AC97_MICIN,
+};
 
 static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
 
diff --git a/arch/arm/mach-s3c64xx/dev-backlight.c b/arch/arm/mach-s3c64xx/dev-backlight.c
index 38c323e68e3f..e62e789f9aee 100644
--- a/arch/arm/mach-s3c64xx/dev-backlight.c
+++ b/arch/arm/mach-s3c64xx/dev-backlight.c
@@ -69,7 +69,6 @@ static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
 	.plat_data = {
 		.max_brightness = 255,
 		.dft_brightness = 255,
-		.pwm_period_ns  = 78770,
 		.enable_gpio    = -1,
 		.init           = samsung_bl_init,
 		.exit           = samsung_bl_exit,
@@ -111,7 +110,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	samsung_bl_data = &samsung_bl_drvdata->plat_data;
 
 	/* Copy board specific data provided by user */
-	samsung_bl_data->pwm_id = bl_data->pwm_id;
 	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
 
 	if (bl_data->max_brightness)
@@ -120,8 +118,6 @@ void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
 	if (bl_data->lth_brightness)
 		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
-	if (bl_data->pwm_period_ns)
-		samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns;
 	if (bl_data->enable_gpio >= 0)
 		samsung_bl_data->enable_gpio = bl_data->enable_gpio;
 	if (bl_data->init)
diff --git a/arch/arm/mach-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
index 46e18d77ea93..a0b4f0329811 100644
--- a/arch/arm/mach-s3c64xx/dev-uart.c
+++ b/arch/arm/mach-s3c64xx/dev-uart.c
@@ -23,6 +23,7 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
+#include <mach/irqs.h>
 
 #include <plat/devs.h>
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
deleted file mode 100644
index c9b95325b672..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/debug-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* pull in the relevant register and map files. */
-
-#include <linux/serial_s3c.h>
-#include <mach/map.h>
-
-	/* note, for the boot process to work we have to keep the UART
-	 * virtual address aligned to an 1MiB boundary for the L1
-	 * mapping the head code makes. We keep the UART virtual address
-	 * aligned and add in the offset when we load the value here.
-	 */
-
-	.macro addruart, rp, rv, tmp
-		ldr	\rp, = S3C_PA_UART
-		ldr	\rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
-#if CONFIG_DEBUG_S3C_UART != 0
-		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
-		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
-#endif
-	.endm
-
-/* include the reset of the code which will do the work, we're only
- * compiling for a single cpu processor type so the default of s3c2440
- * will be fine with us.
- */
-
-#include <debug/samsung.S>
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index 096e14073bd9..9c739eafe95c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -14,38 +14,38 @@
 #define S3C64XX_DMA_CHAN(name)		((unsigned long)(name))
 
 /* DMA0/SDMA0 */
-#define DMACH_UART0		S3C64XX_DMA_CHAN("uart0_tx")
-#define DMACH_UART0_SRC2	S3C64XX_DMA_CHAN("uart0_rx")
-#define DMACH_UART1		S3C64XX_DMA_CHAN("uart1_tx")
-#define DMACH_UART1_SRC2	S3C64XX_DMA_CHAN("uart1_rx")
-#define DMACH_UART2		S3C64XX_DMA_CHAN("uart2_tx")
-#define DMACH_UART2_SRC2	S3C64XX_DMA_CHAN("uart2_rx")
-#define DMACH_UART3		S3C64XX_DMA_CHAN("uart3_tx")
-#define DMACH_UART3_SRC2	S3C64XX_DMA_CHAN("uart3_rx")
-#define DMACH_PCM0_TX		S3C64XX_DMA_CHAN("pcm0_tx")
-#define DMACH_PCM0_RX		S3C64XX_DMA_CHAN("pcm0_rx")
-#define DMACH_I2S0_OUT		S3C64XX_DMA_CHAN("i2s0_tx")
-#define DMACH_I2S0_IN		S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_UART0		"uart0_tx"
+#define DMACH_UART0_SRC2	"uart0_rx"
+#define DMACH_UART1		"uart1_tx"
+#define DMACH_UART1_SRC2	"uart1_rx"
+#define DMACH_UART2		"uart2_tx"
+#define DMACH_UART2_SRC2	"uart2_rx"
+#define DMACH_UART3		"uart3_tx"
+#define DMACH_UART3_SRC2	"uart3_rx"
+#define DMACH_PCM0_TX		"pcm0_tx"
+#define DMACH_PCM0_RX		"pcm0_rx"
+#define DMACH_I2S0_OUT		"i2s0_tx"
+#define DMACH_I2S0_IN		"i2s0_rx"
 #define DMACH_SPI0_TX		S3C64XX_DMA_CHAN("spi0_tx")
 #define DMACH_SPI0_RX		S3C64XX_DMA_CHAN("spi0_rx")
-#define DMACH_HSI_I2SV40_TX	S3C64XX_DMA_CHAN("i2s2_tx")
-#define DMACH_HSI_I2SV40_RX	S3C64XX_DMA_CHAN("i2s2_rx")
+#define DMACH_HSI_I2SV40_TX	"i2s2_tx"
+#define DMACH_HSI_I2SV40_RX	"i2s2_rx"
 
 /* DMA1/SDMA1 */
-#define DMACH_PCM1_TX		S3C64XX_DMA_CHAN("pcm1_tx")
-#define DMACH_PCM1_RX		S3C64XX_DMA_CHAN("pcm1_rx")
-#define DMACH_I2S1_OUT		S3C64XX_DMA_CHAN("i2s1_tx")
-#define DMACH_I2S1_IN		S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_PCM1_TX		"pcm1_tx"
+#define DMACH_PCM1_RX		"pcm1_rx"
+#define DMACH_I2S1_OUT		"i2s1_tx"
+#define DMACH_I2S1_IN		"i2s1_rx"
 #define DMACH_SPI1_TX		S3C64XX_DMA_CHAN("spi1_tx")
 #define DMACH_SPI1_RX		S3C64XX_DMA_CHAN("spi1_rx")
-#define DMACH_AC97_PCMOUT	S3C64XX_DMA_CHAN("ac97_out")
-#define DMACH_AC97_PCMIN	S3C64XX_DMA_CHAN("ac97_in")
-#define DMACH_AC97_MICIN	S3C64XX_DMA_CHAN("ac97_mic")
-#define DMACH_PWM		S3C64XX_DMA_CHAN("pwm")
-#define DMACH_IRDA		S3C64XX_DMA_CHAN("irda")
-#define DMACH_EXTERNAL		S3C64XX_DMA_CHAN("external")
-#define DMACH_SECURITY_RX	S3C64XX_DMA_CHAN("sec_rx")
-#define DMACH_SECURITY_TX	S3C64XX_DMA_CHAN("sec_tx")
+#define DMACH_AC97_PCMOUT	"ac97_out"
+#define DMACH_AC97_PCMIN	"ac97_in"
+#define DMACH_AC97_MICIN	"ac97_mic"
+#define DMACH_PWM		"pwm"
+#define DMACH_IRDA		"irda"
+#define DMACH_EXTERNAL		"external"
+#define DMACH_SECURITY_RX	"sec_rx"
+#define DMACH_SECURITY_TX	"sec_tx"
 
 enum dma_ch {
 	DMACH_MAX = 32
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
index 9c81fac3b2d5..1d3636512e33 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-samsung.h
@@ -14,6 +14,8 @@
 #ifndef GPIO_SAMSUNG_S3C64XX_H
 #define GPIO_SAMSUNG_S3C64XX_H
 
+#ifdef CONFIG_GPIO_SAMSUNG
+
 /* GPIO bank sizes */
 #define S3C64XX_GPIO_A_NR	(8)
 #define S3C64XX_GPIO_B_NR	(7)
@@ -90,5 +92,6 @@ enum s3c_gpio_number {
 /* define the number of gpios we need to the one after the GPQ() range */
 #define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
 
+#endif /* GPIO_SAMSUNG */
 #endif /* GPIO_SAMSUNG_S3C64XX_H */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
index 67bbd1dd04c2..3ceb00b5de07 100644
--- a/arch/arm/mach-s3c64xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -156,25 +156,11 @@
 
 #define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
 
-/* Define a group of interrupts for board-specific use (eg, for MFD
- * interrupt controllers). */
+/* Some boards have their own IRQs behind this */
 #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
 
-#ifdef CONFIG_MACH_WLF_CRAGG_6410
-#define IRQ_BOARD_NR 160
-#elif defined(CONFIG_SMDK6410_WM1190_EV1)
-#define IRQ_BOARD_NR 64
-#elif defined(CONFIG_SMDK6410_WM1192_EV1)
-#define IRQ_BOARD_NR 64
-#else
-#define IRQ_BOARD_NR 16
-#endif
-
-#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
-
-/* Set the default NR_IRQS */
-
-#define NR_IRQS	(IRQ_BOARD_END + 1)
+/* Set the default nr_irqs, boards can override if necessary */
+#define S3C64XX_NR_IRQS	IRQ_BOARD_START
 
 /* Compatibility */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
index a30a1e3ffc6a..4a285e97afff 100644
--- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -16,8 +16,11 @@
 #define __MACH_S3C64XX_PM_CORE_H __FILE__
 
 #include <linux/serial_s3c.h>
+#include <linux/delay.h>
 
 #include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/map.h>
 
 static inline void s3c_pm_debug_init_uart(void)
 {
@@ -56,9 +59,13 @@ static inline void s3c_pm_arch_show_resume_irqs(void)
 
 /* make these defines, we currently do not have any need to change
  * the IRQ wake controls depending on the CPU we are running on */
-
+#ifdef CONFIG_PM_SLEEP
 #define s3c_irqwake_eintallow	((1 << 28) - 1)
 #define s3c_irqwake_intallow	(~0)
+#else
+#define s3c_irqwake_eintallow 0
+#define s3c_irqwake_intallow  0
+#endif
 
 static inline void s3c_pm_arch_update_uart(void __iomem *regs,
 					   struct pm_uart_save *save)
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ae4ea7601f60..0bbf1faaee42 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
 static __init int s3c64xx_syscore_init(void)
 {
 	/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	register_syscore_ops(&s3c64xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 6224c67f5061..347ce6009a8c 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -47,6 +47,7 @@
 
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <mach/irqs.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 #include <plat/samsung-time.h>
@@ -229,7 +230,7 @@ static void __init anw6410_machine_init(void)
 MACHINE_START(ANW6410, "A&W6410")
 	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= anw6410_map_io,
 	.init_machine	= anw6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9c00d83f7151..571f95cc5a53 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,6 +29,9 @@
 
 #include <linux/platform_data/spi-s3c64xx.h>
 
+#include <plat/cpu.h>
+#include <mach/irqs.h>
+
 #include "crag6410.h"
 
 static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +402,9 @@ static struct i2c_driver wlf_gf_module_driver = {
 
 static int __init wlf_gf_module_register(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	return i2c_add_driver(&wlf_gf_module_driver);
 }
 device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 14bd9ae3f476..d9d0440aed78 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -25,10 +25,11 @@
 #include <linux/mmc/host.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/dm9000.h>
 #include <linux/gpio_keys.h>
-#include <linux/basic_mmio_gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/spi/spi.h>
 
 #include <linux/platform_data/pca953x.h>
@@ -51,6 +52,7 @@
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
 
 #include <plat/fb.h>
 #include <plat/sdhci.h>
@@ -108,11 +110,14 @@ static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
 	},
 };
 
+static struct pwm_lookup crag6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight", NULL, 100000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data crag6410_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.pwm_period_ns	= 100000,	/* about 1kHz */
 	.enable_gpio	= -1,
 };
 
@@ -843,6 +848,7 @@ static void __init crag6410_machine_init(void)
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
 	s3c64xx_spi0_set_platdata(NULL, 0, 2);
 
+	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
 
 	gpio_led_register_device(-1, &gpio_leds_pdata);
@@ -855,6 +861,7 @@ static void __init crag6410_machine_init(void)
 MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
 	/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= crag6410_map_io,
 	.init_machine	= crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index e4b087c58ee6..bc7dc1fcbf7d 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -30,6 +31,7 @@
 #include <video/samsung_fimd.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
+#include <mach/irqs.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
@@ -73,6 +75,11 @@ static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
 	},
 };
 
+static struct pwm_lookup hmt_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (100 * 256 * 20), PWM_POLARITY_NORMAL),
+};
+
 static int hmt_bl_init(struct device *dev)
 {
 	int ret;
@@ -110,10 +117,8 @@ static void hmt_bl_exit(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data hmt_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= 100 * 256,
 	.dft_brightness	= 40 * 256,
-	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
 	.enable_gpio	= -1,
 	.init		= hmt_bl_init,
 	.notify		= hmt_bl_notify,
@@ -268,12 +273,14 @@ static void __init hmt_machine_init(void)
 	gpio_request(S3C64XX_GPF(13), "usb power");
 	gpio_direction_output(S3C64XX_GPF(13), 1);
 
+	pwm_add_table(hmt_pwm_lookup, ARRAY_SIZE(hmt_pwm_lookup));
 	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
 }
 
 MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index ab61af50bfb9..ae999fb3fe6d 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
 #include <linux/platform_data/mmc-sdhci-s3c.h>
 #include <plat/sdhci.h>
 #include <linux/platform_data/touchscreen-s3c2410.h>
+#include <mach/irqs.h>
 
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
@@ -233,7 +234,6 @@ static struct platform_device *mini6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&mini6410_lcd_powerdev,
 	&s3c_device_adc,
-	&s3c_device_ts,
 };
 
 static void __init mini6410_map_io(void)
@@ -332,7 +332,7 @@ static void __init mini6410_machine_init(void)
 	s3c_nand_set_platdata(&mini6410_nand_info);
 	s3c_fb_set_platdata(&mini6410_lcd_pdata[features.lcd_index]);
 	s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
-	s3c24xx_ts_set_platdata(NULL);
+	s3c64xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
@@ -363,6 +363,7 @@ static void __init mini6410_machine_init(void)
 MACHINE_START(MINI6410, "MINI6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 80cb1446f69f..23baaa04318c 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -31,6 +31,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
@@ -100,6 +101,7 @@ static void __init ncp_machine_init(void)
 MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 85fa9598b980..4e240ffa7ac7 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -33,6 +33,7 @@
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
+#include <mach/irqs.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
@@ -202,7 +203,6 @@ static struct platform_device *real6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_nand,
 	&s3c_device_adc,
-	&s3c_device_ts,
 	&s3c_device_ohci,
 };
 
@@ -301,7 +301,7 @@ static void __init real6410_machine_init(void)
 
 	s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
 	s3c_nand_set_platdata(&real6410_nand_info);
-	s3c24xx_ts_set_platdata(NULL);
+	s3c64xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
@@ -331,7 +331,7 @@ static void __init real6410_machine_init(void)
 MACHINE_START(REAL6410, "REAL6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= real6410_map_io,
 	.init_machine	= real6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 719843dca510..936a63fc68d5 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -12,8 +12,10 @@
 #include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
@@ -139,6 +141,11 @@ static struct platform_device smartq_usb_otg_vbus_dev = {
 	.dev.platform_data	= &smartq_usb_otg_vbus_pdata,
 };
 
+static struct pwm_lookup smartq_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL,
+		   1000000000 / (1000 * 20), PWM_POLARITY_NORMAL),
+};
+
 static int smartq_bl_init(struct device *dev)
 {
     s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
@@ -147,10 +154,8 @@ static int smartq_bl_init(struct device *dev)
 }
 
 static struct platform_pwm_backlight_data smartq_backlight_data = {
-	.pwm_id		= 1,
 	.max_brightness	= 1000,
 	.dft_brightness	= 600,
-	.pwm_period_ns	= 1000000000 / (1000 * 20),
 	.enable_gpio	= -1,
 	.init		= smartq_bl_init,
 };
@@ -248,7 +253,6 @@ static struct platform_device *smartq_devices[] __initdata = {
 	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&samsung_device_pwm,
-	&s3c_device_ts,
 	&s3c_device_usb_hsotg,
 	&s3c64xx_device_iis0,
 	&smartq_backlight_device,
@@ -379,6 +383,15 @@ void __init smartq_map_io(void)
 	smartq_lcd_mode_set();
 }
 
+static struct gpiod_lookup_table smartq_audio_gpios = {
+	.dev_id = "smartq-audio",
+	.table = {
+		GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
+		GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
+		{ },
+	},
+};
+
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -386,7 +399,7 @@ void __init smartq_machine_init(void)
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
-	s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+	s3c64xx_ts_set_platdata(&smartq_touchscreen_pdata);
 
 	i2c_register_board_info(0, smartq_i2c_devs,
 				ARRAY_SIZE(smartq_i2c_devs));
@@ -396,5 +409,9 @@ void __init smartq_machine_init(void)
 	WARN_ON(smartq_usb_host_init());
 	WARN_ON(smartq_wifi_init());
 
+	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
 	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
+
+	gpiod_add_lookup_table(&smartq_audio_gpios);
+	platform_device_register_simple("smartq-audio", -1, NULL, 0);
 }
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 33224ab36fac..0972b6ce0ef6 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 
 #include <video/samsung_fimd.h>
+#include <mach/irqs.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
@@ -153,6 +154,7 @@ static void __init smartq5_machine_init(void)
 MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index fc7fece22fb0..51ac1c6c654a 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -21,6 +21,7 @@
 #include <asm/mach/arch.h>
 
 #include <video/samsung_fimd.h>
+#include <mach/irqs.h>
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
@@ -169,6 +170,7 @@ static void __init smartq7_machine_init(void)
 MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 6f425126a735..7d8a74fd8915 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -27,6 +27,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/map.h>
 
@@ -88,7 +89,7 @@ static void __init smdk6400_machine_init(void)
 MACHINE_START(SMDK6400, "SMDK6400")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6400_init_irq,
 	.map_io		= smdk6400_map_io,
 	.init_machine	= smdk6400_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 286c9bd676e1..92ec8c3b42b9 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -30,6 +30,7 @@
 #include <linux/smsc911x.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
@@ -51,6 +52,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <mach/map.h>
 
 #include <asm/irq.h>
@@ -214,7 +216,7 @@ static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
 	REGULATOR_SUPPLY("AVDD", "0-001b"),
 };
 
-static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+static struct regulator_init_data __maybe_unused smdk6410_b_pwr_5v_data = {
 	.constraints = {
 		.always_on = 1,
 	},
@@ -288,7 +290,6 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_cfcon,
 	&s3c_device_rtc,
-	&s3c_device_ts,
 	&s3c_device_wdt,
 };
 
@@ -299,7 +300,7 @@ static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
 };
 
 /* VDDARM, BUCK1 on J5 */
-static struct regulator_init_data smdk6410_vddarm = {
+static struct regulator_init_data __maybe_unused smdk6410_vddarm = {
 	.constraints = {
 		.name = "PVDD_ARM",
 		.min_uV = 1000000,
@@ -312,7 +313,7 @@ static struct regulator_init_data smdk6410_vddarm = {
 };
 
 /* VDD_INT, BUCK2 on J5 */
-static struct regulator_init_data smdk6410_vddint = {
+static struct regulator_init_data __maybe_unused smdk6410_vddint = {
 	.constraints = {
 		.name = "PVDD_INT",
 		.min_uV = 1000000,
@@ -323,7 +324,7 @@ static struct regulator_init_data smdk6410_vddint = {
 };
 
 /* VDD_HI, LDO3 on J5 */
-static struct regulator_init_data smdk6410_vddhi = {
+static struct regulator_init_data __maybe_unused smdk6410_vddhi = {
 	.constraints = {
 		.name = "PVDD_HI",
 		.always_on = 1,
@@ -331,7 +332,7 @@ static struct regulator_init_data smdk6410_vddhi = {
 };
 
 /* VDD_PLL, LDO2 on J5 */
-static struct regulator_init_data smdk6410_vddpll = {
+static struct regulator_init_data __maybe_unused smdk6410_vddpll = {
 	.constraints = {
 		.name = "PVDD_PLL",
 		.always_on = 1,
@@ -339,7 +340,7 @@ static struct regulator_init_data smdk6410_vddpll = {
 };
 
 /* VDD_UH_MMC, LDO5 on J5 */
-static struct regulator_init_data smdk6410_vdduh_mmc = {
+static struct regulator_init_data __maybe_unused smdk6410_vdduh_mmc = {
 	.constraints = {
 		.name = "PVDD_UH+PVDD_MMC",
 		.always_on = 1,
@@ -347,7 +348,7 @@ static struct regulator_init_data smdk6410_vdduh_mmc = {
 };
 
 /* VCCM3BT, LDO8 on J5 */
-static struct regulator_init_data smdk6410_vccmc3bt = {
+static struct regulator_init_data __maybe_unused smdk6410_vccmc3bt = {
 	.constraints = {
 		.name = "PVCCM3BT",
 		.always_on = 1,
@@ -355,7 +356,7 @@ static struct regulator_init_data smdk6410_vccmc3bt = {
 };
 
 /* VCCM2MTV, LDO11 on J5 */
-static struct regulator_init_data smdk6410_vccm2mtv = {
+static struct regulator_init_data __maybe_unused smdk6410_vccm2mtv = {
 	.constraints = {
 		.name = "PVCCM2MTV",
 		.always_on = 1,
@@ -363,7 +364,7 @@ static struct regulator_init_data smdk6410_vccm2mtv = {
 };
 
 /* VDD_LCD, LDO12 on J5 */
-static struct regulator_init_data smdk6410_vddlcd = {
+static struct regulator_init_data __maybe_unused smdk6410_vddlcd = {
 	.constraints = {
 		.name = "PVDD_LCD",
 		.always_on = 1,
@@ -371,7 +372,7 @@ static struct regulator_init_data smdk6410_vddlcd = {
 };
 
 /* VDD_OTGI, LDO9 on J5 */
-static struct regulator_init_data smdk6410_vddotgi = {
+static struct regulator_init_data __maybe_unused smdk6410_vddotgi = {
 	.constraints = {
 		.name = "PVDD_OTGI",
 		.always_on = 1,
@@ -379,7 +380,7 @@ static struct regulator_init_data smdk6410_vddotgi = {
 };
 
 /* VDD_OTG, LDO14 on J5 */
-static struct regulator_init_data smdk6410_vddotg = {
+static struct regulator_init_data __maybe_unused smdk6410_vddotg = {
 	.constraints = {
 		.name = "PVDD_OTG",
 		.always_on = 1,
@@ -387,7 +388,7 @@ static struct regulator_init_data smdk6410_vddotg = {
 };
 
 /* VDD_ALIVE, LDO15 on J5 */
-static struct regulator_init_data smdk6410_vddalive = {
+static struct regulator_init_data __maybe_unused smdk6410_vddalive = {
 	.constraints = {
 		.name = "PVDD_ALIVE",
 		.always_on = 1,
@@ -395,7 +396,7 @@ static struct regulator_init_data smdk6410_vddalive = {
 };
 
 /* VDD_AUDIO, VLDO_AUDIO on J5 */
-static struct regulator_init_data smdk6410_vddaudio = {
+static struct regulator_init_data __maybe_unused smdk6410_vddaudio = {
 	.constraints = {
 		.name = "PVDD_AUDIO",
 		.always_on = 1,
@@ -405,7 +406,7 @@ static struct regulator_init_data smdk6410_vddaudio = {
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 /* S3C64xx internal logic & PLL */
-static struct regulator_init_data wm8350_dcdc1_data = {
+static struct regulator_init_data __maybe_unused wm8350_dcdc1_data = {
 	.constraints = {
 		.name = "PVDD_INT+PVDD_PLL",
 		.min_uV = 1200000,
@@ -416,7 +417,7 @@ static struct regulator_init_data wm8350_dcdc1_data = {
 };
 
 /* Memory */
-static struct regulator_init_data wm8350_dcdc3_data = {
+static struct regulator_init_data __maybe_unused wm8350_dcdc3_data = {
 	.constraints = {
 		.name = "PVDD_MEM",
 		.min_uV = 1800000,
@@ -436,7 +437,7 @@ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
 	REGULATOR_SUPPLY("DVDD", "0-001b"),
 };
 
-static struct regulator_init_data wm8350_dcdc4_data = {
+static struct regulator_init_data __maybe_unused wm8350_dcdc4_data = {
 	.constraints = {
 		.name = "PVDD_HI+PVDD_EXT+PVDD_SYS+PVCCM2MTV",
 		.min_uV = 3000000,
@@ -448,7 +449,7 @@ static struct regulator_init_data wm8350_dcdc4_data = {
 };
 
 /* OTGi/1190-EV1 HPVDD & AVDD */
-static struct regulator_init_data wm8350_ldo4_data = {
+static struct regulator_init_data __maybe_unused wm8350_ldo4_data = {
 	.constraints = {
 		.name = "PVDD_OTGI+HPVDD+AVDD",
 		.min_uV = 1200000,
@@ -536,7 +537,7 @@ static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
 	.max_uA = 27554,
 };
 
-static struct regulator_init_data wm1192_dcdc3 = {
+static struct regulator_init_data __maybe_unused wm1192_dcdc3 = {
 	.constraints = {
 		.name = "PVDD_MEM+PVDD_GPS",
 		.always_on = 1,
@@ -547,7 +548,7 @@ static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
 	REGULATOR_SUPPLY("DVDD", "0-001b"),   /* WM8580 */
 };
 
-static struct regulator_init_data wm1192_ldo1 = {
+static struct regulator_init_data __maybe_unused wm1192_ldo1 = {
 	.constraints = {
 		.name = "PVDD_LCD+PVDD_EXT",
 		.always_on = 1,
@@ -623,8 +624,12 @@ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = {
 	.func = S3C_GPIO_SFN(2),
 };
 
+static struct pwm_lookup smdk6410_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", NULL, 78770,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data smdk6410_bl_data = {
-	.pwm_id = 1,
 	.enable_gpio = -1,
 };
 
@@ -663,7 +668,7 @@ static void __init smdk6410_machine_init(void)
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 
-	s3c24xx_ts_set_platdata(NULL);
+	s3c64xx_ts_set_platdata(NULL);
 
 	/* configure nCS1 width to 16 bits */
 
@@ -695,13 +700,14 @@ static void __init smdk6410_machine_init(void)
 
 	platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
 
+	pwm_add_table(smdk6410_pwm_lookup, ARRAY_SIZE(smdk6410_pwm_lookup));
 	samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data);
 }
 
 MACHINE_START(SMDK6410, "SMDK6410")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
 	.atag_offset	= 0x100,
-
+	.nr_irqs	= S3C64XX_NR_IRQS,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smdk6410_map_io,
 	.init_machine	= smdk6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 901a984bddc2..89c5a62830a7 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -14,6 +14,7 @@
 #include <linux/amba/pl08x.h>
 #include <linux/of.h>
 
+#include <plat/cpu.h>
 #include <mach/irqs.h>
 #include <mach/map.h>
 
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
 
 static int __init s3c64xx_pl080_init(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	/* Set all DMA configuration to be DMA, not SDMA */
 	writel(0xffffff, S3C64XX_SDMA_SEL);
 
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 75b14e756383..59d91b83b03d 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -22,6 +22,7 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
+#include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/wakeup-mask.h>
@@ -332,6 +333,9 @@ int __init s3c64xx_pm_init(void)
 
 static __init int s3c64xx_pm_initcall(void)
 {
+	if (!soc_is_s3c64xx())
+		return 0;
+
 	pm_cpu_prep = s3c64xx_pm_prepare;
 	pm_cpu_sleep = s3c64xx_cpu_suspend;
 
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 33273abef669..5ea82accc773 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
 static int __init s3c6400_core_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || soc_is_s3c64xx())
 		return 0;
 
 	return subsys_system_register(&s3c6400_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index eadc48dee0e4..92bb927c4478 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
 static int __init s3c6410_core_init(void)
 {
 	/* Not applicable when using DT. */
-	if (of_have_populated_dt())
+	if (of_have_populated_dt() || !soc_is_s3c64xx())
 		return 0;
 
 	return subsys_system_register(&s3c6410_subsys, NULL);
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 330bfc8fcd52..13bc9820ff22 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -8,7 +8,8 @@
 # Configuration options for the S5PV210/S5PC110
 
 config ARCH_S5PV210
-	bool "Samsung S5PV210/S5PC110" if ARCH_MULTI_V7
+	bool "Samsung S5PV210/S5PC110"
+	depends on ARCH_MULTI_V7
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index c6f6ed1cbed0..36e3c79f4973 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -61,10 +61,7 @@ config SA1100_H3100
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3100 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
+	  H3100 handheld computer.
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
@@ -73,10 +70,7 @@ config SA1100_H3600
 	select MFD_IPAQ_MICRO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
-	  H3600 handheld computer.  Information about this machine and the
-	  Linux port to this machine can be found at:
-
-	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
+	  H3600 and H3700 handheld computers.
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 73093dc89829..a1a041b9740b 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -19,7 +19,7 @@
 
 #define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
 
-static void putc(int c)
+static inline void putc(int c)
 {
 	unsigned long serial_port;
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 41e476e571d7..bb3ca9c763de 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -15,7 +15,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -98,8 +98,8 @@ static void cs3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 static int cs3_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	if (offset > 15)
-		return simpad_get_cs3_ro() & (1 << (offset - 16));
-	return simpad_get_cs3_shadow() & (1 << offset);
+		return !!(simpad_get_cs3_ro() & (1 << (offset - 16)));
+	return !!(simpad_get_cs3_shadow() & (1 << offset));
 };
 
 static int cs3_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
@@ -369,7 +369,7 @@ static int __init simpad_init(void)
 	cs3_gpio.get = cs3_gpio_get;
 	cs3_gpio.direction_input = cs3_gpio_direction_input;
 	cs3_gpio.direction_output = cs3_gpio_direction_output;
-	ret = gpiochip_add(&cs3_gpio);
+	ret = gpiochip_add_data(&cs3_gpio, NULL);
 	if (ret)
 		printk(KERN_WARNING "simpad: Unable to register cs3 GPIO device");
 
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 926e336d6aeb..f2bc5c353119 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,38 +1,43 @@
 config ARCH_SHMOBILE
 	bool
-	select ZONE_DMA if ARM_LPAE
+
+config ARCH_SHMOBILE_MULTI
+	bool
 
 config PM_RCAR
 	bool
-	select PM_GENERIC_DOMAINS if PM
+	select PM
+	select PM_GENERIC_DOMAINS
 
 config PM_RMOBILE
 	bool
+	select PM
 	select PM_GENERIC_DOMAINS
 
 config ARCH_RCAR_GEN1
 	bool
-	select PM_RCAR if PM || SMP
+	select PM_RCAR
 	select RENESAS_INTC_IRQPIN
 	select SYS_SUPPORTS_SH_TMU
 
 config ARCH_RCAR_GEN2
 	bool
-	select PM_RCAR if PM || SMP
+	select PM_RCAR
 	select RENESAS_IRQC
 	select SYS_SUPPORTS_SH_CMT
 	select PCI_DOMAINS if PCI
 
 config ARCH_RMOBILE
 	bool
-	select PM_RMOBILE if PM
+	select PM_RMOBILE
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
-menuconfig ARCH_SHMOBILE_MULTI
-	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
-	depends on MMU
+menuconfig ARCH_RENESAS
+	bool "Renesas ARM SoCs"
+	depends on ARCH_MULTI_V7 && MMU
 	select ARCH_SHMOBILE
+	select ARCH_SHMOBILE_MULTI
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ARM_GIC
@@ -40,8 +45,9 @@ menuconfig ARCH_SHMOBILE_MULTI
 	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
+	select ZONE_DMA if ARM_LPAE
 
-if ARCH_SHMOBILE_MULTI
+if ARCH_RENESAS
 
 #comment "Renesas ARM SoCs System Type"
 
@@ -51,7 +57,8 @@ config ARCH_EMEV2
 
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
-	select PM_GENERIC_DOMAINS if PM
+	select PM
+	select PM_GENERIC_DOMAINS
 	select SYS_SUPPORTS_SH_MTU2
 
 config ARCH_R8A73A4
@@ -95,79 +102,4 @@ config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
 	select ARCH_RMOBILE
 	select RENESAS_INTC_IRQPIN
-
-comment "Renesas ARM SoCs System Configuration"
-endif
-
-if ARCH_SHMOBILE_LEGACY
-
-comment "Renesas ARM SoCs System Type"
-
-config ARCH_R8A7778
-	bool "R-Car M1A (R8A77781)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
-config ARCH_R8A7779
-	bool "R-Car H1 (R8A77790)"
-	select ARCH_RCAR_GEN1
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-
-comment "Renesas ARM SoCs Board Type"
-
-config MACH_BOCKW
-	bool "BOCK-W platform"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SND_SOC_AK4554 if SND_SIMPLE_CARD
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
-	select USE_OF
-
-config MACH_BOCKW_REFERENCE
-	bool "BOCK-W  - Reference Device Tree Implementation"
-	depends on ARCH_R8A7778
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select USE_OF
-	---help---
-	   Use reference implementation of BockW board support
-	   which makes use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
-comment "Renesas ARM SoCs System Configuration"
-
-config CPU_HAS_INTEVT
-        bool
-	default y
-
-config SH_CLK_CPG
-	bool
-
-source "drivers/sh/Kconfig"
-
-endif
-
-if ARCH_SHMOBILE
-
-menu "Timer and clock configuration"
-
-config SHMOBILE_TIMER_HZ
-	int "Kernel HZ (jiffies per second)"
-	range 32 1024
-	default "128"
-	help
-	  Allows the configuration of the timer frequency. It is customary
-	  to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
-	  case of low timer frequencies other values may be more suitable.
-	  Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
-	  want to select a HZ value such as 128 that can evenly divide RCLK.
-	  A HZ value that does not divide evenly may cause timer drift.
-
-endmenu
-
 endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 476de30798d7..a65c80ac9009 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o
+obj-y				:= timer.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o
@@ -18,12 +18,6 @@ obj-$(CONFIG_ARCH_R8A7794)	+= setup-r8a7794.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)	+= setup-r7s72100.o
 
-# Clock objects
-ifndef CONFIG_COMMON_CLK
-obj-y				+= clock.o
-obj-$(CONFIG_ARCH_R8A7778)	+= clock-r8a7778.o
-endif
-
 # CPU reset vector handling objects
 cpu-y				:= platsmp.o headsmp.o
 
@@ -49,11 +43,5 @@ obj-$(CONFIG_PM_RCAR)		+= pm-rcar.o
 obj-$(CONFIG_PM_RMOBILE)	+= pm-rmobile.o
 obj-$(CONFIG_ARCH_RCAR_GEN2)	+= pm-rcar-gen2.o
 
-# Board objects
-ifndef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
-obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
-endif
-
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
deleted file mode 100644
index a489fe9a76cd..000000000000
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ /dev/null
@@ -1,12 +0,0 @@
-# per-board load address for uImage
-loadaddr-y	:=
-loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-
-__ZRELADDR	:= $(sort $(loadaddr-y))
-   zreladdr-y   += $(__ZRELADDR)
-
-# Unsupported legacy stuff
-#
-#params_phys-y (Instead: Pass atags pointer in r2)
-#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
deleted file mode 100644
index 4f78296f7d04..000000000000
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a7778.h"
-
-/*
- *	see board-bock.c for checking detail of dip-switch
- */
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *fpga;
-	void __iomem *pfc;
-
-#ifndef CONFIG_COMMON_CLK
-	r8a7778_clock_init();
-#endif
-	r8a7778_init_irq_extpin_dt(1);
-	r8a7778_add_dt_devices();
-
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		iounmap(fpga);
-	}
-
-	pfc = ioremap_nocache(PFC, 0x200);
-	if (pfc) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
-		iounmap(pfc);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
-	"renesas,bockw-reference",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.init_late	= shmobile_init_late,
-	.dt_compat	= bockw_boards_compat_dt,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
deleted file mode 100644
index 25a0e7233fe4..000000000000
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013-2014  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013-2014  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/camera-rcar.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/usb/renesas_usbhs.h>
-
-#include <media/soc_camera.h>
-#include <asm/mach/arch.h>
-#include <sound/rcar_snd.h>
-#include <sound/simple_card.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
-
-#define FPGA	0x18200000
-#define IRQ0MR	0x30
-#define COMCTLR	0x101c
-static void __iomem *fpga;
-
-/*
- *	CN9(Upper side) SCIF/RCAN selection
- *
- *		1,4	3,6
- * SW40		SCIF	RCAN
- * SW41		SCIF	RCAN
- */
-
-/*
- * MMC (CN26) pin
- *
- * SW6	(D2)	3 pin
- * SW7	(D5)	ON
- * SW8	(D3)	3 pin
- * SW10	(D4)	1 pin
- * SW12	(CLK)	1 pin
- * SW13	(D6)	3 pin
- * SW14	(CMD)	ON
- * SW15	(D6)	1 pin
- * SW16	(D0)	ON
- * SW17	(D1)	ON
- * SW18	(D7)	3 pin
- * SW19	(MMC)	1 pin
- */
-
-/*
- *	SSI settings
- *
- * SW45: 1-4 side	(SSI5 out, ROUT/LOUT CN19 Mid)
- * SW46: 1101		(SSI6 Recorde)
- * SW47: 1110		(SSI5 Playback)
- * SW48: 11		(Recorde power)
- * SW49: 1		(SSI slave mode)
- * SW50: 1111		(SSI7, SSI8)
- * SW51: 1111		(SSI3, SSI4)
- * SW54: 1pin		(ak4554 FPGA control)
- * SW55: 1		(CLKB is 24.5760MHz)
- * SW60: 1pin		(ak4554 FPGA control)
- * SW61: 3pin		(use X11 clock)
- * SW78: 3-6		(ak4642 connects I2C0)
- *
- * You can use sound as
- *
- * hw0: CN19: SSI56-AK4643
- * hw1: CN21: SSI3-AK4554(playback)
- * hw2: CN21: SSI4-AK4554(capture)
- * hw3: CN20: SSI7-AK4554(playback)
- * hw4: CN20: SSI8-AK4554(capture)
- *
- * this command is required when playback on hw0.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/*
- * USB
- *
- * USB1 (CN29) can be Host/Function
- *
- *		Host	Func
- * SW98		1	2
- * SW99		1	3
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-static struct smsc911x_platform_config smsc911x_data __initdata = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_32BIT,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] __initdata = {
-	DEFINE_RES_MEM(0x18300000, 0x1000),
-	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
-};
-
-#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
-/*
- * When USB1 is Func
- */
-static int usbhsf_get_id(struct platform_device *pdev)
-{
-	return USBHS_GADGET;
-}
-
-#define SUSPMODE	0x102
-static int usbhsf_power_ctrl(struct platform_device *pdev,
-			     void __iomem *base, int enable)
-{
-	enable = !!enable;
-
-	r8a7778_usb_phy_power(enable);
-
-	iowrite16(enable << 14, base + SUSPMODE);
-
-	return 0;
-}
-
-static struct resource usbhsf_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe60000, 0x110),
-	DEFINE_RES_IRQ(gic_iid(0x4f)),
-};
-
-static struct renesas_usbhs_platform_info usbhs_info __initdata = {
-	.platform_callback = {
-		.get_id		= usbhsf_get_id,
-		.power_ctrl	= usbhsf_power_ctrl,
-	},
-	.driver_param = {
-		.buswait_bwait	= 4,
-		.d0_tx_id	= HPBDMA_SLAVE_USBFUNC_TX,
-		.d1_rx_id	= HPBDMA_SLAVE_USBFUNC_RX,
-	},
-};
-
-#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
-#define USB1_DEVICE	"renesas_usbhs"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()			\
-	platform_device_register_resndata(			\
-		NULL, "renesas_usbhs", -1,			\
-		usbhsf_resources,				\
-		ARRAY_SIZE(usbhsf_resources),			\
-		&usbhs_info, sizeof(struct renesas_usbhs_platform_info))
-
-#else
-/*
- * When USB1 is Host
- */
-#define USB_PHY_SETTING { }
-#define USB1_DEVICE	"ehci-platform"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
-
-#endif
-
-/* USB */
-static struct resource usb_phy_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70800, 0x100),
-	DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
-	USB_PHY_SETTING;
-
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info __initdata = {
-	.chan_priv_tx	= (void *)HPBDMA_SLAVE_SDHI0_TX,
-	.chan_priv_rx	= (void *)HPBDMA_SLAVE_SDHI0_RX,
-	.capabilities	= MMC_CAP_SD_HIGHSPEED,
-	.ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
-	.flags		= TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] __initdata = {
-	DEFINE_RES_MEM(0xFFE4C000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x77)),
-};
-
-/* Ether */
-static struct resource ether_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfde00000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-static struct sh_eth_plat_data ether_platform_data __initdata = {
-	.phy		= 0x01,
-	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
-	.phy_interface	= PHY_INTERFACE_MODE_RMII,
-	/*
-	 * Although the LINK signal is available on the board, it's connected to
-	 * the link/activity LED output of the PHY, thus the link disappears and
-	 * reappears after each packet.  We'd be better off ignoring such signal
-	 * and getting the link state from the PHY indirectly.
-	 */
-	.no_ether_link	= 1,
-};
-
-static struct platform_device_info ether_info __initdata = {
-	.name		= "r8a777x-ether",
-	.id		= -1,
-	.res		= ether_resources,
-	.num_res	= ARRAY_SIZE(ether_resources),
-	.data		= &ether_platform_data,
-	.size_data	= sizeof(ether_platform_data),
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("rx8581", 0x51),
-	}, {
-		I2C_BOARD_INFO("ak4643", 0x12),
-	}
-};
-
-/* HSPI*/
-static struct mtd_partition m25p80_spi_flash_partitions[] = {
-	{
-		.name	= "data(spi)",
-		.size	= 0x0100000,
-		.offset	= 0,
-	},
-};
-
-static struct flash_platform_data spi_flash_data = {
-	.name		= "m25p80",
-	.type		= "s25fl008k",
-	.parts		= m25p80_spi_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(m25p80_spi_flash_partitions),
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias	= "m25p80",
-		.max_speed_hz	= 104000000,
-		.chip_select	= 0,
-		.bus_num	= 0,
-		.mode		= SPI_MODE_0,
-		.platform_data	= &spi_flash_data,
-	},
-};
-
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe4e000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
-	.sup_pclk	= 0,
-	.caps		= MMC_CAP_4_BIT_DATA |
-			  MMC_CAP_8_BIT_DATA |
-			  MMC_CAP_NEEDS_POLL,
-};
-
-/* In the default configuration both decoders reside on I2C bus 0 */
-#define BOCKW_CAMERA(idx)						\
-static struct i2c_board_info camera##idx##_info = {			\
-	I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)),			\
-};									\
-									\
-static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = {	\
-	.bus_id		= idx,						\
-	.i2c_adapter_id	= 0,						\
-	.board_info	= &camera##idx##_info,				\
-}
-
-BOCKW_CAMERA(0);
-BOCKW_CAMERA(1);
-
-/* VIN */
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
-	.flags	= RCAR_VIN_BT656,
-};
-
-#define R8A7778_VIN(idx)						\
-static struct resource vin##idx##_resources[] __initdata = {		\
-	DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000),		\
-	DEFINE_RES_IRQ(gic_iid(0x5a)),					\
-};									\
-									\
-static struct platform_device_info vin##idx##_info __initdata = {	\
-	.name		= "r8a7778-vin",				\
-	.id		= idx,						\
-	.res		= vin##idx##_resources,				\
-	.num_res	= ARRAY_SIZE(vin##idx##_resources),		\
-	.dma_mask	= DMA_BIT_MASK(32),				\
-	.data		= &vin_platform_data,				\
-	.size_data	= sizeof(vin_platform_data),			\
-}
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-/* Sound */
-static struct resource rsnd_resources[] __initdata = {
-	[RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
-	[RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
-	[RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
-};
-
-static struct rsnd_ssi_platform_info rsnd_ssi[] = {
-	RSND_SSI_UNUSED, /* SSI 0 */
-	RSND_SSI_UNUSED, /* SSI 1 */
-	RSND_SSI_UNUSED, /* SSI 2 */
-	RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
-	RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
-};
-
-static struct rsnd_src_platform_info rsnd_src[9] = {
-	RSND_SRC_UNUSED, /* SRU 0 */
-	RSND_SRC_UNUSED, /* SRU 1 */
-	RSND_SRC_UNUSED, /* SRU 2 */
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-	RSND_SRC(0, 0),
-};
-
-static struct rsnd_dai_platform_info rsnd_dai[] = {
-	{
-		.playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
-		.capture  = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
-	}, {
-		.playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
-	}, {
-		.capture  = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
-	},
-};
-
-enum {
-	AK4554_34 = 0,
-	AK4643_56,
-	AK4554_78,
-	SOUND_MAX,
-};
-
-static int rsnd_codec_power(int id, int enable)
-{
-	static int sound_user[SOUND_MAX] = {0, 0, 0};
-	int *usr = NULL;
-	u32 bit;
-
-	switch (id) {
-	case 3:
-	case 4:
-		usr = sound_user + AK4554_34;
-		bit = (1 << 10);
-		break;
-	case 5:
-	case 6:
-		usr = sound_user + AK4643_56;
-		bit = (1 << 6);
-		break;
-	case 7:
-	case 8:
-		usr = sound_user + AK4554_78;
-		bit = (1 << 7);
-		break;
-	}
-
-	if (!usr)
-		return -EIO;
-
-	if (enable) {
-		if (*usr == 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val &= ~bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-
-		(*usr)++;
-	} else {
-		if (*usr == 0)
-			return 0;
-
-		(*usr)--;
-
-		if (*usr == 0) {
-			u32 val = ioread16(fpga + COMCTLR);
-			val |= bit;
-			iowrite16(val, fpga + COMCTLR);
-		}
-	}
-
-	return 0;
-}
-
-static int rsnd_start(int id)
-{
-	return rsnd_codec_power(id, 1);
-}
-
-static int rsnd_stop(int id)
-{
-	return rsnd_codec_power(id, 0);
-}
-
-static struct rcar_snd_info rsnd_info = {
-	.flags		= RSND_GEN1,
-	.ssi_info	= rsnd_ssi,
-	.ssi_info_nr	= ARRAY_SIZE(rsnd_ssi),
-	.src_info	= rsnd_src,
-	.src_info_nr	= ARRAY_SIZE(rsnd_src),
-	.dai_info	= rsnd_dai,
-	.dai_info_nr	= ARRAY_SIZE(rsnd_dai),
-	.start		= rsnd_start,
-	.stop		= rsnd_stop,
-};
-
-static struct asoc_simple_card_info rsnd_card_info[] = {
-	/* SSI5, SSI6 */
-	{
-		.name		= "AK4643",
-		.card		= "SSI56-AK4643",
-		.codec		= "ak4642-codec.0-0012",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
-		.cpu_dai = {
-			.name	= "rsnd-dai.0",
-		},
-		.codec_dai = {
-			.name	= "ak4642-hifi",
-			.sysclk	= 11289600,
-		},
-	},
-	/* SSI3 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI3-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.1",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI4 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI4-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.0",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.2",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI7 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI7-AK4554(playback)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.3",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	},
-	/* SSI8 */
-	{
-		.name		= "AK4554",
-		.card		= "SSI8-AK4554(capture)",
-		.codec		= "ak4554-adc-dac.1",
-		.platform	= "rcar_sound",
-		.daifmt		= SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
-		.cpu_dai = {
-			.name	= "rsnd-dai.4",
-		},
-		.codec_dai = {
-			.name	= "ak4554-hifi",
-		},
-	}
-};
-
-static const struct pinctrl_map bockw_pinctrl_map[] = {
-	/* AUDIO */
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_a", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "audio_clk_b", "audio_clk"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi34_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi3_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi4_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi5_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi6_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi78_ctrl", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi7_data", "ssi"),
-	PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
-				  "ssi8_data", "ssi"),
-	/* Ether */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
-				  "ether_rmii", "ether"),
-	/* HSPI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
-				  "hspi0_a", "hspi0"),
-	/* MMC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_data8", "mmc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
-				  "mmc_ctrl", "mmc"),
-	/* SCIF0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_data_a", "scif0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
-				  "scif0_ctrl", "scif0"),
-	/* USB */
-	PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
-				  "usb0", "usb0"),
-	PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
-				  "usb1", "usb1"),
-	/* SDHI0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_cd", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
-				  "sdhi0_wp", "sdhi0"),
-	/* VIN0 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_clk", "vin0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
-				  "vin0_data8", "vin0"),
-	/* VIN1 */
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_clk", "vin1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
-				  "vin1_data8", "vin1"),
-};
-
-#define PFC	0xfffc0000
-#define PUPR4	0x110
-static void __init bockw_init(void)
-{
-	void __iomem *base;
-	struct clk *clk;
-	struct platform_device *pdev;
-	int i;
-
-	r8a7778_clock_init();
-	r8a7778_init_irq_extpin(1);
-	r8a7778_add_standard_devices();
-
-	platform_device_register_full(&ether_info);
-
-	platform_device_register_full(&vin0_info);
-	/* VIN1 has a pin conflict with Ether */
-	if (!IS_ENABLED(CONFIG_SH_ETH))
-		platform_device_register_full(&vin1_info);
-	platform_device_register_data(NULL, "soc-camera-pdrv", 0,
-				      &iclink0_ml86v7667,
-				      sizeof(iclink0_ml86v7667));
-	platform_device_register_data(NULL, "soc-camera-pdrv", 1,
-				      &iclink1_ml86v7667,
-				      sizeof(iclink1_ml86v7667));
-
-	i2c_register_board_info(0, i2c0_devices,
-				ARRAY_SIZE(i2c0_devices));
-	spi_register_board_info(spi_board_info,
-				ARRAY_SIZE(spi_board_info));
-	pinctrl_register_mappings(bockw_pinctrl_map,
-				  ARRAY_SIZE(bockw_pinctrl_map));
-	r8a7778_pinmux_init();
-
-	platform_device_register_resndata(
-		NULL, "sh_mmcif", -1,
-		mmc_resources, ARRAY_SIZE(mmc_resources),
-		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
-
-	platform_device_register_resndata(
-		NULL, "rcar_usb_phy", -1,
-		usb_phy_resources,
-		ARRAY_SIZE(usb_phy_resources),
-		&usb_phy_platform_data,
-		sizeof(struct rcar_phy_platform_data));
-
-	regulator_register_fixed(0, dummy_supplies,
-				 ARRAY_SIZE(dummy_supplies));
-	regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
-				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
-	/* for SMSC */
-	fpga = ioremap_nocache(FPGA, SZ_1M);
-	if (fpga) {
-		/*
-		 * CAUTION
-		 *
-		 * IRQ0/1 is cascaded interrupt from FPGA.
-		 * it should be cared in the future
-		 * Now, it is assuming IRQ0 was used only from SMSC.
-		 */
-		u16 val = ioread16(fpga + IRQ0MR);
-		val &= ~(1 << 4); /* enable SMSC911x */
-		iowrite16(val, fpga + IRQ0MR);
-
-		platform_device_register_resndata(
-			NULL, "smsc911x", -1,
-			smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
-			&smsc911x_data, sizeof(smsc911x_data));
-	}
-
-	/* for SDHI */
-	base = ioremap_nocache(PFC, 0x200);
-	if (base) {
-		/*
-		 * FIXME
-		 *
-		 * SDHI CD/WP pin needs pull-up
-		 */
-		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
-		iounmap(base);
-
-		platform_device_register_resndata(
-			NULL, "sh_mobile_sdhi", 0,
-			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
-			&sdhi0_info, sizeof(struct tmio_mmc_data));
-	}
-
-	/* for Audio */
-	rsnd_codec_power(5, 1); /* enable ak4642 */
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 0, NULL, 0);
-
-	platform_device_register_simple(
-		"ak4554-adc-dac", 1, NULL, 0);
-
-	pdev = platform_device_register_resndata(
-		NULL, "rcar_sound", -1,
-		rsnd_resources, ARRAY_SIZE(rsnd_resources),
-		&rsnd_info, sizeof(rsnd_info));
-
-	clk = clk_get(&pdev->dev, "clk_b");
-	clk_set_rate(clk, 24576000);
-	clk_put(clk);
-
-	for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
-		struct platform_device_info cardinfo = {
-			.name           = "asoc-simple-card",
-			.id             = i,
-			.data           = &rsnd_card_info[i],
-			.size_data      = sizeof(struct asoc_simple_card_info),
-			.dma_mask	= DMA_BIT_MASK(32),
-		};
-
-		platform_device_register_full(&cardinfo);
-	}
-}
-
-static void __init bockw_init_late(void)
-{
-	r8a7778_init_late();
-	ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
-	"renesas,bockw",
-	NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
-	.init_early	= shmobile_init_delay,
-	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= bockw_init,
-	.dt_compat	= bockw_boards_compat_dt,
-	.init_late      = bockw_init_late,
-MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c
deleted file mode 100644
index e8510c35558c..000000000000
--- a/arch/arm/mach-shmobile/clock-r8a7778.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * r8a7778 clock framework support
- *
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- *     MD      MD      MD      MD       PLLA   PLLB    EXTAL   clki    clkz
- *     19      18      12      11                      (HMz)   (MHz)   (MHz)
- *----------------------------------------------------------------------------
- *     1       0       0       0       x21     x21     38.00   800     800
- *     1       0       0       1       x24     x24     33.33   800     800
- *     1       0       1       0       x28     x28     28.50   800     800
- *     1       0       1       1       x32     x32     25.00   800     800
- *     1       1       0       1       x24     x21     33.33   800     700
- *     1       1       1       0       x28     x21     28.50   800     600
- *     1       1       1       1       x32     x24     25.00   800     600
- */
-
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-
-#define MSTPCR0		IOMEM(0xffc80030)
-#define MSTPCR1		IOMEM(0xffc80034)
-#define MSTPCR3		IOMEM(0xffc8003c)
-#define MSTPSR1		IOMEM(0xffc80044)
-#define MSTPSR4		IOMEM(0xffc80048)
-#define MSTPSR6		IOMEM(0xffc8004c)
-#define MSTPCR4		IOMEM(0xffc80050)
-#define MSTPCR5		IOMEM(0xffc80054)
-#define MSTPCR6		IOMEM(0xffc80058)
-#define MODEMR		0xFFCC0020
-
-#define MD(nr)	BIT(nr)
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
-	.phys	= 0xffc80000,
-	.len	= 0x80,
-};
-
-static struct clk extal_clk = {
-	/* .rate will be updated on r8a7778_clock_init() */
-	.mapping = &cpg_mapping,
-};
-
-static struct clk audio_clk_a = {
-};
-
-static struct clk audio_clk_b = {
-};
-
-static struct clk audio_clk_c = {
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7778_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(plla_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(pllb_clk,	extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(i_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s1_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s3_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(s4_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(b_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(out_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(p_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(g_clk,		plla_clk,  1, 1);
-SH_FIXED_RATIO_CLK_SET(z_clk,		pllb_clk,  1, 1);
-
-static struct clk *main_clks[] = {
-	&extal_clk,
-	&plla_clk,
-	&pllb_clk,
-	&i_clk,
-	&s_clk,
-	&s1_clk,
-	&s3_clk,
-	&s4_clk,
-	&b_clk,
-	&out_clk,
-	&p_clk,
-	&g_clk,
-	&z_clk,
-	&audio_clk_a,
-	&audio_clk_b,
-	&audio_clk_c,
-};
-
-enum {
-	MSTP531, MSTP530,
-	MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523,
-	MSTP331,
-	MSTP323, MSTP322, MSTP321,
-	MSTP311, MSTP310,
-	MSTP309, MSTP308, MSTP307,
-	MSTP114,
-	MSTP110, MSTP109,
-	MSTP100,
-	MSTP030,
-	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
-	MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
-	MSTP009, MSTP008, MSTP007,
-	MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */
-	[MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */
-	[MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */
-	[MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */
-	[MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */
-	[MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */
-	[MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */
-	[MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */
-	[MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */
-	[MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */
-	[MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
-	[MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
-	[MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
-	[MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
-	[MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
-	[MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  9, 0), /* SSI6 */
-	[MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  8, 0), /* SSI7 */
-	[MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3,  7, 0), /* SSI8 */
-	[MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
-	[MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
-	[MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1,  9, 0), /* VIN1 */
-	[MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1,  0, 0), /* USB0/1 */
-	[MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
-	[MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
-	[MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */
-	[MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */
-	[MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
-	[MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
-	[MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
-	[MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
-	[MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
-	[MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
-	[MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
-	[MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
-	[MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
-	[MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
-	[MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
-	[MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  9, 0), /* SSI3 */
-	[MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0,  8, 0), /* SRU */
-	[MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0,  7, 0), /* HSPI */
-};
-
-static struct clk_lookup lookups[] = {
-	/* main */
-	CLKDEV_CON_ID("shyway_clk",	&s_clk),
-	CLKDEV_CON_ID("peripheral_clk",	&p_clk),
-
-	/* MSTP32 clocks */
-	CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
-	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
-	CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
-	CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
-	CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
-	CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
-	CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
-	CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
-	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
-	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
-	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
-	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
-	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
-	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
-	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
-	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
-	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
-	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
-	CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
-	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
-	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
-	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
-	CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
-
-	CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
-	CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
-	CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
-	CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
-	CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
-	CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
-	CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
-	CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
-	CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
-	CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
-	CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
-	CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
-	CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
-	CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
-	CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
-	CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
-	CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
-	CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
-	CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
-	CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
-	CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
-	CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]),
-	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
-	CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]),
-};
-
-void __init r8a7778_clock_init(void)
-{
-	void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
-	u32 mode;
-	int k, ret = 0;
-
-	BUG_ON(!modemr);
-	mode = ioread32(modemr);
-	iounmap(modemr);
-
-	switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
-	case MD(19):
-		extal_clk.rate = 38000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	21, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	case MD(19) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	28, 1);
-		break;
-	case MD(19) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	32, 1);
-		break;
-	case MD(19) | MD(18) | MD(11):
-		extal_clk.rate = 33333333;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	24, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12):
-		extal_clk.rate = 28500000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	28, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	21, 1);
-		break;
-	case MD(19) | MD(18) | MD(12) | MD(11):
-		extal_clk.rate = 25000000;
-		SH_CLK_SET_RATIO(&plla_clk_ratio,	32, 1);
-		SH_CLK_SET_RATIO(&pllb_clk_ratio,	24, 1);
-		break;
-	default:
-		BUG();
-	}
-
-	if (mode & MD(1)) {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 3);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 6);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 12);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 18);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 18);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	} else {
-		SH_CLK_SET_RATIO(&i_clk_ratio,	1, 1);
-		SH_CLK_SET_RATIO(&s_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s1_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&s3_clk_ratio,	1, 4);
-		SH_CLK_SET_RATIO(&s4_clk_ratio,	1, 8);
-		SH_CLK_SET_RATIO(&p_clk_ratio,	1, 16);
-		SH_CLK_SET_RATIO(&g_clk_ratio,	1, 12);
-		if (mode & MD(2)) {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 16);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 16);
-		} else {
-			SH_CLK_SET_RATIO(&b_clk_ratio,		1, 12);
-			SH_CLK_SET_RATIO(&out_clk_ratio,	1, 12);
-		}
-	}
-
-	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
-		ret = clk_register(main_clks[k]);
-
-	if (!ret)
-		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	if (!ret)
-		shmobile_clk_init();
-	else
-		panic("failed to setup r8a7778 clocks\n");
-}
diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
deleted file mode 100644
index 68c2d06d0eaa..000000000000
--- a/arch/arm/mach-shmobile/clock.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * SH-Mobile Clock Framework
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sh_clk.h>
-
-#include "clock.h"
-#include "common.h"
-
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
-{
-	struct clk_ratio *p = clk->priv;
-
-	return clk->parent->rate / p->div * p->mul;
-};
-
-struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
-	.recalc	= shmobile_fixed_ratio_clk_recalc,
-};
-
-int __init shmobile_clk_init(void)
-{
-	/* Kick the child clocks.. */
-	recalculate_root_clocks();
-
-	/* Enable the necessary init clocks */
-	clk_enable_init_clocks();
-
-	return 0;
-}
diff --git a/arch/arm/mach-shmobile/clock.h b/arch/arm/mach-shmobile/clock.h
deleted file mode 100644
index cf3552ea1019..000000000000
--- a/arch/arm/mach-shmobile/clock.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef CLOCK_H
-#define CLOCK_H
-
-/* legacy clock implementation */
-
-struct clk;
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
-extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
-
-/* clock ratio */
-struct clk_ratio {
-	int mul;
-	int div;
-};
-
-#define SH_CLK_RATIO(name, m, d)		\
-static struct clk_ratio name ##_ratio = {	\
-	.mul = m,				\
-	.div = d,				\
-}
-
-#define SH_FIXED_RATIO_CLKg(name, p, r)	\
-struct clk name = {			\
-	.parent	= &p,				\
-	.ops	= &shmobile_fixed_ratio_clk_ops,\
-	.priv	= &r ## _ratio,			\
-}
-
-#define SH_FIXED_RATIO_CLK(name, p, r)		\
-static SH_FIXED_RATIO_CLKg(name, p, r)
-
-#define SH_FIXED_RATIO_CLK_SET(name, p, m, d)	\
-	SH_CLK_RATIO(name, m, d);		\
-	SH_FIXED_RATIO_CLK(name, p, name)
-
-#define SH_CLK_SET_RATIO(p, m, d)	\
-do {			\
-	(p)->mul = m;	\
-	(p)->div = d;	\
-} while (0)
-
-#endif
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 8d27ec546a35..5464b7a75e30 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -1,13 +1,9 @@
 #ifndef __ARCH_MACH_COMMON_H
 #define __ARCH_MACH_COMMON_H
 
-extern void shmobile_earlytimer_init(void);
 extern void shmobile_init_delay(void);
-struct twd_local_timer;
-extern void shmobile_setup_console(void);
 extern void shmobile_boot_vector(void);
 extern unsigned long shmobile_boot_fn;
-extern unsigned long shmobile_boot_arg;
 extern unsigned long shmobile_boot_size;
 extern void shmobile_smp_boot(void);
 extern void shmobile_smp_sleep(void);
@@ -15,11 +11,10 @@ extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn,
 			      unsigned long arg);
 extern bool shmobile_smp_cpu_can_disable(unsigned int cpu);
 extern void shmobile_boot_scu(void);
-extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
+extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
+					  unsigned int max_cpus);
 extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
 extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-struct clk;
-extern int shmobile_clk_init(void);
 extern struct platform_suspend_ops shmobile_suspend_ops;
 
 #ifdef CONFIG_SUSPEND
@@ -36,8 +31,6 @@ int shmobile_cpufreq_init(void);
 static inline int shmobile_cpufreq_init(void) { return 0; }
 #endif
 
-extern void __iomem *shmobile_scu_base;
-
 static inline void __init shmobile_init_late(void)
 {
 	shmobile_suspend_init();
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
deleted file mode 100644
index e329ccbd0a67..000000000000
--- a/arch/arm/mach-shmobile/console.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SH-Mobile Console
- *
- * Copyright (C) 2010  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include "common.h"
-
-void __init shmobile_setup_console(void)
-{
-	parse_early_param();
-
-	/* Let earlyprintk output early console messages */
-	early_platform_driver_probe("earlyprintk", 1, 1);
-}
diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c
index 57fbff024dcd..634d701c56a7 100644
--- a/arch/arm/mach-shmobile/cpufreq.c
+++ b/arch/arm/mach-shmobile/cpufreq.c
@@ -10,6 +10,8 @@
 
 #include <linux/platform_device.h>
 
+#include "common.h"
+
 int __init shmobile_cpufreq_init(void)
 {
 	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
diff --git a/arch/arm/mach-shmobile/emev2.h b/arch/arm/mach-shmobile/emev2.h
new file mode 100644
index 000000000000..916d25f6780e
--- /dev/null
+++ b/arch/arm/mach-shmobile/emev2.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_EMEV2_H__
+#define __ASM_EMEV2_H__
+
+extern const struct smp_operations emev2_smp_ops;
+
+#endif /* __ASM_EMEV2_H__ */
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index fa5248c52399..936d7011c314 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -27,7 +27,7 @@
  */
 ENTRY(shmobile_boot_scu)
 					@ r0 = SCU base address
-	mrc     p15, 0, r1, c0, c0, 5	@ read MIPDR
+	mrc     p15, 0, r1, c0, c0, 5	@ read MPIDR
 	and	r1, r1, #3		@ mask out cpu ID
 	lsl	r1, r1, #3		@ we will shift by cpu_id * 8 bits
 	ldr	r2, [r0, #8]		@ SCU Power Status Register
@@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu)
 
 	b	secondary_startup
 ENDPROC(shmobile_boot_scu)
-
-	.text
-	.align	2
-	.globl	shmobile_scu_base
-shmobile_scu_base:
-	.space	4
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index 330c1fc63197..32e0bf6e3ccb 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -24,7 +24,6 @@
 	.arm
 	.align  12
 ENTRY(shmobile_boot_vector)
-	ldr     r0, 2f
 	ldr     r1, 1f
 	bx	r1
 
@@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector)
 	.globl	shmobile_boot_fn
 shmobile_boot_fn:
 1:	.space	4
-	.globl	shmobile_boot_arg
-shmobile_boot_arg:
-2:	.space	4
 	.globl	shmobile_boot_size
 shmobile_boot_size:
 	.long	. - shmobile_boot_vector
@@ -46,13 +42,15 @@ shmobile_boot_size:
  */
 
 ENTRY(shmobile_smp_boot)
-						@ r0 = MPIDR_HWID_BITMASK
 	mrc	p15, 0, r1, c0, c0, 5		@ r1 = MPIDR
-	and	r0, r1, r0			@ r0 = cpu_logical_map() value
+	and	r0, r1, #0xffffff		@ MPIDR_HWID_BITMASK
+						@ r0 = cpu_logical_map() value
 	mov	r1, #0				@ r1 = CPU index
-	adr	r5, 1f				@ array of per-cpu mpidr values
-	adr	r6, 2f				@ array of per-cpu functions
-	adr	r7, 3f				@ array of per-cpu arguments
+	adr	r2, 1f
+	ldmia	r2, {r5, r6, r7}
+	add	r5, r5, r2			@ array of per-cpu mpidr values
+	add	r6, r6, r2			@ array of per-cpu functions
+	add	r7, r7, r2			@ array of per-cpu arguments
 
 shmobile_smp_boot_find_mpidr:
 	ldr	r8, [r5, r1, lsl #2]
@@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep)
 	b	shmobile_smp_boot
 ENDPROC(shmobile_smp_sleep)
 
+	.align	2
+1:	.long	shmobile_smp_mpidr - .
+	.long	shmobile_smp_fn - 1b
+	.long	shmobile_smp_arg - 1b
+
+	.bss
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
-1:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_fn
 shmobile_smp_fn:
-2:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
 	.globl	shmobile_smp_arg
 shmobile_smp_arg:
-3:	.space	NR_CPUS * 4
+	.space	NR_CPUS * 4
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
deleted file mode 100644
index 5aee83f079e2..000000000000
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __ASM_MACH_IRQS_H
-#define __ASM_MACH_IRQS_H
-
-/* Stuck here until drivers/pinctl/sh-pfc gets rid of legacy code */
-
-/* External IRQ pins */
-#define IRQPIN_BASE		2000
-#define irq_pin(nr)		((nr) + IRQPIN_BASE)
-
-#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/intc.h b/arch/arm/mach-shmobile/intc.h
deleted file mode 100644
index 40b2ad4ca5b4..000000000000
--- a/arch/arm/mach-shmobile/intc.h
+++ /dev/null
@@ -1,295 +0,0 @@
-#ifndef __ASM_MACH_INTC_H
-#define __ASM_MACH_INTC_H
-#include <linux/sh_intc.h>
-
-#define INTC_IRQ_PINS_ENUM_16L(p)				\
-	p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7,		\
-	p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,	\
-	p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
-
-#define INTC_IRQ_PINS_ENUM_16H(p)				\
-	p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,	\
-	p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23,	\
-	p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,	\
-	p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
-
-#define INTC_IRQ_PINS_VECT_16L(p, vect)				\
-	vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220),	\
-	vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260),	\
-	vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0),	\
-	vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0),	\
-	vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320),	\
-	vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360),	\
-	vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0),	\
-	vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
-
-#define INTC_IRQ_PINS_VECT_16H(p, vect)				\
-	vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220),	\
-	vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260),	\
-	vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0),	\
-	vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0),	\
-	vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320),	\
-	vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360),	\
-	vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0),	\
-	vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
-
-#define INTC_IRQ_PINS_MASK_16L(p, base)					\
-	{ base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */	\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */	\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_MASK_16H(p, base)					\
-	{ base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */	\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */	\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_PRIO_16L(p, base)					\
-	{ base + 0x10, 0, 32, 4, /* INTPRI00A */			\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x14, 0, 32, 4, /* INTPRI10A */			\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_PRIO_16H(p, base)					\
-	{ base + 0x18, 0, 32, 4, /* INTPRI20A */			\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x1c, 0, 32, 4, /* INTPRI30A */			\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_SENSE_16L(p, base)				\
-	{ base + 0x00, 32, 4, /* ICR1A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x04, 32, 4, /* ICR2A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_SENSE_16H(p, base)				\
-	{ base + 0x08, 32, 4, /* ICR3A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x0c, 32, 4, /* ICR4A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_ACK_16L(p, base)					\
-	{ base + 0x20, 0, 8, /* INTREQ00A */				\
-	  { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3,		\
-	    p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } },		\
-	{ base + 0x24, 0, 8, /* INTREQ10A */				\
-	  { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11,		\
-	    p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_ACK_16H(p, base)					\
-	{ base + 0x28, 0, 8, /* INTREQ20A */				\
-	  { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19,		\
-	    p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } },	\
-	{ base + 0x2c, 0, 8, /* INTREQ30A */				\
-	  { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27,		\
-	    p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_16(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_16H(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x64,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_32(p, base, vect, str)				\
-									\
-static struct resource p ## _resources[] __initdata = {			\
-	[0] = {								\
-		.start	= base,						\
-		.end	= base + 0x6c,					\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-};									\
-									\
-enum {									\
-	p ## _UNUSED = 0,						\
-	INTC_IRQ_PINS_ENUM_16L(p),					\
-	INTC_IRQ_PINS_ENUM_16H(p),					\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	INTC_IRQ_PINS_VECT_16L(p, vect),				\
-	INTC_IRQ_PINS_VECT_16H(p, vect),				\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	INTC_IRQ_PINS_MASK_16L(p, base),				\
-	INTC_IRQ_PINS_MASK_16H(p, base),				\
-};									\
-									\
-static struct intc_prio_reg p ## _prio_registers[] __initdata = {	\
-	INTC_IRQ_PINS_PRIO_16L(p, base),				\
-	INTC_IRQ_PINS_PRIO_16H(p, base),				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	INTC_IRQ_PINS_SENSE_16L(p, base),				\
-	INTC_IRQ_PINS_SENSE_16H(p, base),				\
-};									\
-									\
-static struct intc_mask_reg p ## _ack_registers[] __initdata = {	\
-	INTC_IRQ_PINS_ACK_16L(p, base),					\
-	INTC_IRQ_PINS_ACK_16H(p, base),					\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.resource = p ## _resources,					\
-	.num_resources = ARRAY_SIZE(p ## _resources),			\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, p ## _prio_registers, \
-			     p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_PINT_E_EMPTY
-#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
-#define INTC_PINT_E(p)							\
-	PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3,	\
-	PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
-
-#define INTC_PINT_V_NONE
-#define INTC_PINT_V(p, vect)					\
-	vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1),	\
-	vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3),	\
-	vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5),	\
-	vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
-
-#define INTC_PINT(p, mask_reg, sense_base, str,				\
-	enums_1, enums_2, enums_3, enums_4,				\
-	vect_1, vect_2, vect_3, vect_4,					\
-	mask_a, mask_b, mask_c, mask_d,					\
-	sense_a, sense_b, sense_c, sense_d)				\
-									\
-enum {									\
-	PINT ## p ## _UNUSED = 0,					\
-	enums_1 enums_2 enums_3 enums_4 				\
-};									\
-									\
-static struct intc_vect p ## _vectors[] __initdata = {			\
-	vect_1 vect_2 vect_3 vect_4					\
-};									\
-									\
-static struct intc_mask_reg p ## _mask_registers[] __initdata = {	\
-	{ mask_reg, 0, 32, /* PINTER */					\
-	  { mask_a mask_b mask_c mask_d } }				\
-};									\
-									\
-static struct intc_sense_reg p ## _sense_registers[] __initdata = {	\
-	{ sense_base + 0x00, 16, 2, /* PINTCR */			\
-	  { sense_a } },						\
-	{ sense_base + 0x04, 16, 2, /* PINTCR */			\
-	  { sense_b } },						\
-	{ sense_base + 0x08, 16, 2, /* PINTCR */			\
-	  { sense_c } },						\
-	{ sense_base + 0x0c, 16, 2, /* PINTCR */			\
-	  { sense_d } },						\
-};									\
-									\
-static struct intc_desc p ## _desc __initdata = {			\
-	.name = str,							\
-	.hw = INTC_HW_DESC(p ## _vectors, NULL,				\
-			     p ## _mask_registers, NULL,		\
-			     p ## _sense_registers, NULL),		\
-}
-
-/* INTCS */
-#define INTCS_VECT_BASE		0x3400
-#define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))
-
-#endif  /* __ASM_MACH_INTC_H */
diff --git a/arch/arm/mach-shmobile/irqs.h b/arch/arm/mach-shmobile/irqs.h
deleted file mode 100644
index 3070f6d887eb..000000000000
--- a/arch/arm/mach-shmobile/irqs.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __SHMOBILE_IRQS_H
-#define __SHMOBILE_IRQS_H
-
-#include "include/mach/irqs.h"
-
-/* GIC */
-#define gic_spi(nr)		((nr) + 32)
-#define gic_iid(nr)		(nr) /* ICCIAR / interrupt ID */
-
-/* GPIO IRQ */
-#define _GPIO_IRQ_BASE		2500
-#define GPIO_IRQ_BASE(x)	(_GPIO_IRQ_BASE + (32 * x))
-#define GPIO_IRQ(x, y)		(_GPIO_IRQ_BASE + (32 * x) + y)
-
-#endif /* __SHMOBILE_IRQS_H */
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index 4e54512bee30..aba75c89f9c1 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -88,7 +88,7 @@ static void apmu_init_cpu(struct resource *res, int cpu, int bit)
 static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
 			   struct rcar_apmu_config *apmu_config, int num)
 {
-	u32 id;
+	int id;
 	int k;
 	int bit, index;
 	bool is_allowed;
@@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* perform per-cpu setup */
 	apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
@@ -170,7 +169,7 @@ static inline void cpu_enter_lowpower_a15(void)
 	dsb();
 }
 
-void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
+static void shmobile_smp_apmu_cpu_shutdown(unsigned int cpu)
 {
 
 	/* Select next sleep mode using the APMU */
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index 64663110ab6c..8d478f1da265 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -17,6 +17,10 @@
 #include <asm/smp_scu.h>
 #include "common.h"
 
+
+static phys_addr_t shmobile_scu_base_phys;
+static void __iomem *shmobile_scu_base;
+
 static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
 					  unsigned long action, void *hcpu)
 {
@@ -26,7 +30,7 @@ static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
 	case CPU_UP_PREPARE:
 		/* For this particular CPU register SCU SMP boot vector */
 		shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu),
-				  (unsigned long)shmobile_scu_base);
+				  shmobile_scu_base_phys);
 		break;
 	};
 
@@ -37,13 +41,15 @@ static struct notifier_block shmobile_smp_scu_notifier = {
 	.notifier_call = shmobile_smp_scu_notifier_call,
 };
 
-void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus)
+void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys,
+					  unsigned int max_cpus)
 {
 	/* install boot code shared by all CPUs */
 	shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
-	shmobile_boot_arg = MPIDR_HWID_BITMASK;
 
 	/* enable SCU and cache coherency on booting CPU */
+	shmobile_scu_base_phys = scu_base_phys;
+	shmobile_scu_base = ioremap(scu_base_phys, PAGE_SIZE);
 	scu_enable(shmobile_scu_base);
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
 
diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c
index 47a862e7f8ba..14c42a1bdf1e 100644
--- a/arch/arm/mach-shmobile/pm-r8a7779.c
+++ b/arch/arm/mach-shmobile/pm-r8a7779.c
@@ -9,20 +9,8 @@
  * for more details.
  */
 
-#include <linux/pm.h>
-#include <linux/suspend.h>
-#include <linux/err.h>
-#include <linux/pm_clock.h>
-#include <linux/pm_domain.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-
 #include <asm/io.h>
 
-#include "common.h"
 #include "pm-rcar.h"
 #include "r8a7779.h"
 
@@ -30,17 +18,6 @@
 #define SYSCIER 0x0c
 #define SYSCIMR 0x10
 
-struct r8a7779_pm_domain {
-	struct generic_pm_domain genpd;
-	struct rcar_sysc_ch ch;
-};
-
-static inline
-const struct rcar_sysc_ch *to_r8a7779_ch(struct generic_pm_domain *d)
-{
-	return &container_of(d, struct r8a7779_pm_domain, genpd)->ch;
-}
-
 #if defined(CONFIG_PM) || defined(CONFIG_SMP)
 
 static void __init r8a7779_sysc_init(void)
@@ -58,82 +35,6 @@ static inline void r8a7779_sysc_init(void) {}
 
 #endif /* CONFIG_PM || CONFIG_SMP */
 
-#ifdef CONFIG_PM
-
-static int pd_power_down(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_down(to_r8a7779_ch(genpd));
-}
-
-static int pd_power_up(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_up(to_r8a7779_ch(genpd));
-}
-
-static bool pd_is_off(struct generic_pm_domain *genpd)
-{
-	return rcar_sysc_power_is_off(to_r8a7779_ch(genpd));
-}
-
-static bool pd_active_wakeup(struct device *dev)
-{
-	return true;
-}
-
-static void r8a7779_init_pm_domain(struct r8a7779_pm_domain *r8a7779_pd)
-{
-	struct generic_pm_domain *genpd = &r8a7779_pd->genpd;
-
-	pm_genpd_init(genpd, NULL, false);
-	genpd->dev_ops.active_wakeup = pd_active_wakeup;
-	genpd->power_off = pd_power_down;
-	genpd->power_on = pd_power_up;
-
-	if (pd_is_off(&r8a7779_pd->genpd))
-		pd_power_up(&r8a7779_pd->genpd);
-}
-
-static struct r8a7779_pm_domain r8a7779_pm_domains[] = {
-	{
-		.genpd.name = "SH4A",
-		.ch = {
-			.chan_offs = 0x80, /* PWRSR1 .. PWRER1 */
-			.isr_bit = 16, /* SH4A */
-		},
-	},
-	{
-		.genpd.name = "SGX",
-		.ch = {
-			.chan_offs = 0xc0, /* PWRSR2 .. PWRER2 */
-			.isr_bit = 20, /* SGX */
-		},
-	},
-	{
-		.genpd.name = "VDP1",
-		.ch = {
-			.chan_offs = 0x100, /* PWRSR3 .. PWRER3 */
-			.isr_bit = 21, /* VDP */
-		},
-	},
-	{
-		.genpd.name = "IMPX3",
-		.ch = {
-			.chan_offs = 0x140, /* PWRSR4 .. PWRER4 */
-			.isr_bit = 24, /* IMP */
-		},
-	},
-};
-
-void __init r8a7779_init_pm_domains(void)
-{
-	int j;
-
-	for (j = 0; j < ARRAY_SIZE(r8a7779_pm_domains); j++)
-		r8a7779_init_pm_domain(&r8a7779_pm_domains[j]);
-}
-
-#endif /* CONFIG_PM */
-
 void __init r8a7779_pm_init(void)
 {
 	static int once;
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index a5b96b990aea..c0b05e9e6442 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -12,6 +12,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#include <linux/clk/renesas.h>
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/of.h>
@@ -124,36 +125,6 @@ static bool rmobile_pd_active_wakeup(struct device *dev)
 	return true;
 }
 
-static int rmobile_pd_attach_dev(struct generic_pm_domain *domain,
-				 struct device *dev)
-{
-	int error;
-
-	error = pm_clk_create(dev);
-	if (error) {
-		dev_err(dev, "pm_clk_create failed %d\n", error);
-		return error;
-	}
-
-	error = pm_clk_add(dev, NULL);
-	if (error) {
-		dev_err(dev, "pm_clk_add failed %d\n", error);
-		goto fail;
-	}
-
-	return 0;
-
-fail:
-	pm_clk_destroy(dev);
-	return error;
-}
-
-static void rmobile_pd_detach_dev(struct generic_pm_domain *domain,
-				  struct device *dev)
-{
-	pm_clk_destroy(dev);
-}
-
 static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 {
 	struct generic_pm_domain *genpd = &rmobile_pd->genpd;
@@ -164,8 +135,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
 	genpd->dev_ops.active_wakeup	= rmobile_pd_active_wakeup;
 	genpd->power_off		= rmobile_pd_power_down;
 	genpd->power_on			= rmobile_pd_power_up;
-	genpd->attach_dev		= rmobile_pd_attach_dev;
-	genpd->detach_dev		= rmobile_pd_detach_dev;
+	genpd->attach_dev		= cpg_mstp_attach_dev;
+	genpd->detach_dev		= cpg_mstp_detach_dev;
 	__rmobile_pd_power_up(rmobile_pd, false);
 }
 
@@ -342,8 +313,10 @@ static int __init rmobile_add_pm_domains(void __iomem *base,
 		}
 
 		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
-		if (!pd)
+		if (!pd) {
+			of_node_put(np);
 			return -ENOMEM;
+		}
 
 		pd->genpd.name = np->name;
 		pd->base = base;
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 30a4a421ee31..8146bb6d7237 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -12,10 +12,6 @@
 
 #include <linux/pm_domain.h>
 
-#define DEFAULT_DEV_LATENCY_NS	250000
-
-struct platform_device;
-
 struct rmobile_pm_domain {
 	struct generic_pm_domain genpd;
 	struct dev_power_governor *gov;
@@ -26,9 +22,4 @@ struct rmobile_pm_domain {
 	bool no_debug;
 };
 
-struct pm_domain_device {
-	const char *domain_name;
-	struct platform_device *pdev;
-};
-
 #endif /* PM_RMOBILE_H */
diff --git a/arch/arm/mach-shmobile/r8a7778.h b/arch/arm/mach-shmobile/r8a7778.h
deleted file mode 100644
index f64fedb1f2cc..000000000000
--- a/arch/arm/mach-shmobile/r8a7778.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2013  Renesas Solutions Corp.
- * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013  Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_R8A7778_H__
-#define __ASM_R8A7778_H__
-
-#include <linux/sh_eth.h>
-
-/* HPB-DMA slave IDs */
-enum {
-	HPBDMA_SLAVE_DUMMY,
-	HPBDMA_SLAVE_SDHI0_TX,
-	HPBDMA_SLAVE_SDHI0_RX,
-	HPBDMA_SLAVE_SSI0_TX,
-	HPBDMA_SLAVE_SSI0_RX,
-	HPBDMA_SLAVE_SSI1_TX,
-	HPBDMA_SLAVE_SSI1_RX,
-	HPBDMA_SLAVE_SSI2_TX,
-	HPBDMA_SLAVE_SSI2_RX,
-	HPBDMA_SLAVE_SSI3_TX,
-	HPBDMA_SLAVE_SSI3_RX,
-	HPBDMA_SLAVE_SSI4_TX,
-	HPBDMA_SLAVE_SSI4_RX,
-	HPBDMA_SLAVE_SSI5_TX,
-	HPBDMA_SLAVE_SSI5_RX,
-	HPBDMA_SLAVE_SSI6_TX,
-	HPBDMA_SLAVE_SSI6_RX,
-	HPBDMA_SLAVE_SSI7_TX,
-	HPBDMA_SLAVE_SSI7_RX,
-	HPBDMA_SLAVE_SSI8_TX,
-	HPBDMA_SLAVE_SSI8_RX,
-	HPBDMA_SLAVE_HPBIF0_TX,
-	HPBDMA_SLAVE_HPBIF0_RX,
-	HPBDMA_SLAVE_HPBIF1_TX,
-	HPBDMA_SLAVE_HPBIF1_RX,
-	HPBDMA_SLAVE_HPBIF2_TX,
-	HPBDMA_SLAVE_HPBIF2_RX,
-	HPBDMA_SLAVE_HPBIF3_TX,
-	HPBDMA_SLAVE_HPBIF3_RX,
-	HPBDMA_SLAVE_HPBIF4_TX,
-	HPBDMA_SLAVE_HPBIF4_RX,
-	HPBDMA_SLAVE_HPBIF5_TX,
-	HPBDMA_SLAVE_HPBIF5_RX,
-	HPBDMA_SLAVE_HPBIF6_TX,
-	HPBDMA_SLAVE_HPBIF6_RX,
-	HPBDMA_SLAVE_HPBIF7_TX,
-	HPBDMA_SLAVE_HPBIF7_RX,
-	HPBDMA_SLAVE_HPBIF8_TX,
-	HPBDMA_SLAVE_HPBIF8_RX,
-	HPBDMA_SLAVE_USBFUNC_TX,
-	HPBDMA_SLAVE_USBFUNC_RX,
-};
-
-extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_dt_devices(void);
-
-extern void r8a7778_init_late(void);
-extern void r8a7778_init_irq_dt(void);
-extern void r8a7778_clock_init(void);
-extern void r8a7778_init_irq_extpin(int irlm);
-extern void r8a7778_init_irq_extpin_dt(int irlm);
-extern void r8a7778_pinmux_init(void);
-
-extern int r8a7778_usb_phy_power(bool enable);
-
-#endif /* __ASM_R8A7778_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7779.h b/arch/arm/mach-shmobile/r8a7779.h
index db303f76704e..2a5f7730a03c 100644
--- a/arch/arm/mach-shmobile/r8a7779.h
+++ b/arch/arm/mach-shmobile/r8a7779.h
@@ -1,16 +1,8 @@
 #ifndef __ASM_R8A7779_H__
 #define __ASM_R8A7779_H__
 
-#include <linux/sh_clk.h>
-
 extern void r8a7779_pm_init(void);
 
-#ifdef CONFIG_PM
-extern void __init r8a7779_init_pm_domains(void);
-#else
-static inline void r8a7779_init_pm_domains(void) {}
-#endif /* CONFIG_PM */
-
-extern struct smp_operations r8a7779_smp_ops;
+extern const struct smp_operations r8a7779_smp_ops;
 
 #endif /* __ASM_R8A7779_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7790.h b/arch/arm/mach-shmobile/r8a7790.h
index 1a46d026052c..136f3455e9c7 100644
--- a/arch/arm/mach-shmobile/r8a7790.h
+++ b/arch/arm/mach-shmobile/r8a7790.h
@@ -1,6 +1,6 @@
 #ifndef __ASM_R8A7790_H__
 #define __ASM_R8A7790_H__
 
-extern struct smp_operations r8a7790_smp_ops;
+extern const struct smp_operations r8a7790_smp_ops;
 
 #endif /* __ASM_R8A7790_H__ */
diff --git a/arch/arm/mach-shmobile/r8a7791.h b/arch/arm/mach-shmobile/r8a7791.h
index 7ca0b7d0f59b..cf7a8405bd7f 100644
--- a/arch/arm/mach-shmobile/r8a7791.h
+++ b/arch/arm/mach-shmobile/r8a7791.h
@@ -1,6 +1,6 @@
 #ifndef __ASM_R8A7791_H__
 #define __ASM_R8A7791_H__
 
-extern struct smp_operations r8a7791_smp_ops;
+extern const struct smp_operations r8a7791_smp_ops;
 
 #endif /* __ASM_R8A7791_H__ */
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 37f7b15c01bc..3c99aaf65325 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -18,35 +18,17 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include "common.h"
-
-static struct map_desc emev2_io_desc[] __initdata = {
-#ifdef CONFIG_SMP
-	/* 2M mapping for SCU + L2 controller */
-	{
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0x1e000000),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE
-	},
-#endif
-};
 
-static void __init emev2_map_io(void)
-{
-	iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
-}
+#include "common.h"
+#include "emev2.h"
 
 static const char *const emev2_boards_compat_dt[] __initconst = {
 	"renesas,emev2",
 	NULL,
 };
 
-extern struct smp_operations emev2_smp_ops;
-
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
-	.map_io		= emev2_map_io,
 	.init_early	= shmobile_init_delay,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= emev2_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 0c8f80c5b04d..db6dbfbaf9f1 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -23,41 +23,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 
-static struct map_desc r8a7740_io_desc[] __initdata = {
-	 /*
-	  * for CPGA/INTC/PFC
-	  * 0xe6000000-0xefffffff -> 0xe6000000-0xefffffff
-	  */
-	{
-		.virtual	= 0xe6000000,
-		.pfn		= __phys_to_pfn(0xe6000000),
-		.length		= 160 << 20,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#ifdef CONFIG_CACHE_L2X0
-	/*
-	 * for l2x0_init()
-	 * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
-	 */
-	{
-		.virtual	= 0xf0002000,
-		.pfn		= __phys_to_pfn(0xf0100000),
-		.length		= PAGE_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
-#endif
-};
-
-static void __init r8a7740_map_io(void)
-{
-	debug_ll_io_init();
-	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
-}
-
 /*
  * r8a7740 chip has lasting errata on MERAM buffer.
  * this is work-around for it.
@@ -110,10 +78,6 @@ static void __init r8a7740_generic_init(void)
 {
 	r8a7740_meram_workaround();
 
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 32K*8way */
-	l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
@@ -123,7 +87,8 @@ static const char *const r8a7740_boards_compat_dt[] __initconst = {
 };
 
 DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
-	.map_io		= r8a7740_map_io,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index b9116c81e54b..cf236db686a9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -15,36 +15,16 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/clk/shmobile.h>
-#include <linux/kernel.h>
+#include <linux/clk/renesas.h>
 #include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/dma-rcar-hpbdma.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
 #include <linux/irqchip.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/dma-mapping.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
 
 #define MODEMR 0xffcc0020
 
-#ifdef CONFIG_COMMON_CLK
 static void __init r8a7778_timer_init(void)
 {
 	u32 mode;
@@ -55,555 +35,21 @@ static void __init r8a7778_timer_init(void)
 	iounmap(modemr);
 	r8a7778_clocks_init(mode);
 }
-#endif
 
-/* SCIF */
-#define R8A7778_SCIF(index, baseaddr, irq)			\
-static struct plat_sci_port scif##index##_platform_data = {	\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
-	.type		= PORT_SCIF,				\
-};								\
-								\
-static struct resource scif##index##_resources[] = {		\
-	DEFINE_RES_MEM(baseaddr, 0x100),			\
-	DEFINE_RES_IRQ(irq),					\
-}
-
-R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
-R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
-R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
-R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
-R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
-R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
-
-#define r8a7778_register_scif(index)					       \
-	platform_device_register_resndata(NULL, "sh-sci", index,	       \
-					  scif##index##_resources,	       \
-					  ARRAY_SIZE(scif##index##_resources), \
-					  &scif##index##_platform_data,	       \
-					  sizeof(scif##index##_platform_data))
-
-/* TMU */
-static struct sh_timer_config sh_tmu0_platform_data = {
-	.channels_mask = 7,
-};
-
-static struct resource sh_tmu0_resources[] = {
-	DEFINE_RES_MEM(0xffd80000, 0x30),
-	DEFINE_RES_IRQ(gic_iid(0x40)),
-	DEFINE_RES_IRQ(gic_iid(0x41)),
-	DEFINE_RES_IRQ(gic_iid(0x42)),
-};
-
-#define r8a7778_register_tmu(idx)			\
-	platform_device_register_resndata(		\
-		NULL, "sh-tmu", idx,			\
-		sh_tmu##idx##_resources,		\
-		ARRAY_SIZE(sh_tmu##idx##_resources),	\
-		&sh_tmu##idx##_platform_data,		\
-		sizeof(sh_tmu##idx##_platform_data))
-
-int r8a7778_usb_phy_power(bool enable)
-{
-	static struct usb_phy *phy = NULL;
-	int ret = 0;
-
-	if (!phy)
-		phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
-	if (IS_ERR(phy)) {
-		pr_err("kernel doesn't have usb phy driver\n");
-		return PTR_ERR(phy);
-	}
-
-	if (enable)
-		ret = usb_phy_init(phy);
-	else
-		usb_phy_shutdown(phy);
-
-	return ret;
-}
-
-/* USB */
-static int usb_power_on(struct platform_device *pdev)
-{
-	int ret = r8a7778_usb_phy_power(true);
-
-	if (ret)
-		return ret;
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
-	return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
-	if (r8a7778_usb_phy_power(false))
-		return;
-
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
-}
-
-static int ehci_init_internal_buffer(struct usb_hcd *hcd)
-{
-	/*
-	 * Below are recommended values from the datasheet;
-	 * see [USB :: Setting of EHCI Internal Buffer].
-	 */
-	/* EHCI IP internal buffer setting */
-	iowrite32(0x00ff0040, hcd->regs + 0x0094);
-	/* EHCI IP internal buffer enable */
-	iowrite32(0x00000001, hcd->regs + 0x009C);
-
-	return 0;
-}
-
-static struct usb_ehci_pdata ehci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-	.pre_setup	= ehci_init_internal_buffer,
-};
-
-static struct resource ehci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70000, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-static struct usb_ohci_pdata ohci_pdata __initdata = {
-	.power_on	= usb_power_on,
-	.power_off	= usb_power_off,
-	.power_suspend	= usb_power_off,
-};
-
-static struct resource ohci_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70400, 0x400),
-	DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-#define USB_PLATFORM_INFO(hci)					\
-static struct platform_device_info hci##_info __initdata = {	\
-	.name		= #hci "-platform",			\
-	.id		= -1,					\
-	.res		= hci##_resources,			\
-	.num_res	= ARRAY_SIZE(hci##_resources),		\
-	.data		= &hci##_pdata,				\
-	.size_data	= sizeof(hci##_pdata),			\
-	.dma_mask	= DMA_BIT_MASK(32),			\
-}
-
-USB_PLATFORM_INFO(ehci);
-USB_PLATFORM_INFO(ohci);
-
-/* PFC/GPIO */
-static struct resource pfc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfffc0000, 0x118),
-};
-
-#define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
-	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
-	DEFINE_RES_IRQ(gic_iid(0x87)),					\
-};									\
-									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
-	.gpio_base	= 32 * (idx),					\
-	.irq_base	= GPIO_IRQ_BASE(idx),				\
-	.number_of_pins	= 32,						\
-	.pctl_name	= "pfc-r8a7778",				\
-}
-
-R8A7778_GPIO(0);
-R8A7778_GPIO(1);
-R8A7778_GPIO(2);
-R8A7778_GPIO(3);
-R8A7778_GPIO(4);
-
-#define r8a7778_register_gpio(idx)				\
-	platform_device_register_resndata(			\
-		NULL, "gpio_rcar", idx,				\
-		r8a7778_gpio##idx##_resources,			\
-		ARRAY_SIZE(r8a7778_gpio##idx##_resources),	\
-		&r8a7778_gpio##idx##_platform_data,		\
-		sizeof(r8a7778_gpio##idx##_platform_data))
-
-void __init r8a7778_pinmux_init(void)
-{
-	platform_device_register_simple(
-		"pfc-r8a7778", -1,
-		pfc_resources,
-		ARRAY_SIZE(pfc_resources));
-
-	r8a7778_register_gpio(0);
-	r8a7778_register_gpio(1);
-	r8a7778_register_gpio(2);
-	r8a7778_register_gpio(3);
-	r8a7778_register_gpio(4);
-};
-
-/* I2C */
-static struct resource i2c_resources[] __initdata = {
-	/* I2C0 */
-	DEFINE_RES_MEM(0xffc70000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x63)),
-	/* I2C1 */
-	DEFINE_RES_MEM(0xffc71000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6e)),
-	/* I2C2 */
-	DEFINE_RES_MEM(0xffc72000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6c)),
-	/* I2C3 */
-	DEFINE_RES_MEM(0xffc73000, 0x1000),
-	DEFINE_RES_IRQ(gic_iid(0x6d)),
-};
-
-static void __init r8a7778_register_i2c(int id)
-{
-	BUG_ON(id < 0 || id > 3);
-
-	platform_device_register_simple(
-		"i2c-rcar", id,
-		i2c_resources + (2 * id), 2);
-}
-
-/* HSPI */
-static struct resource hspi_resources[] __initdata = {
-	/* HSPI0 */
-	DEFINE_RES_MEM(0xfffc7000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x5f)),
-	/* HSPI1 */
-	DEFINE_RES_MEM(0xfffc8000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x74)),
-	/* HSPI2 */
-	DEFINE_RES_MEM(0xfffc6000, 0x18),
-	DEFINE_RES_IRQ(gic_iid(0x75)),
-};
-
-static void __init r8a7778_register_hspi(int id)
-{
-	BUG_ON(id < 0 || id > 2);
-
-	platform_device_register_simple(
-		"sh-hspi", id,
-		hspi_resources + (2 * id), 2);
-}
-
-void __init r8a7778_add_dt_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
-	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
-	if (base) {
-		/*
-		 * Shared attribute override enable, 64K*16way
-		 * don't call iounmap(base)
-		 */
-		l2x0_init(base, 0x00400000, 0xc20f0fff);
-	}
-#endif
-}
-
-/* HPB-DMA */
-
-/* Asynchronous mode register (ASYNCMDR) bits */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MASK	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE	BIT(2)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI	0	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MASK	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
-
-#define HPBDMA_SSI(_id)				\
-{						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_TX,	\
-	.addr	= 0xffd91008 + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DMDL |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}, {						\
-	.id	= HPBDMA_SLAVE_SSI## _id ##_RX,	\
-	.addr	= 0xffd9100c + (_id * 0x40),	\
-	.dcr	= HPB_DMAE_DCR_CT |		\
-		  HPB_DMAE_DCR_DIP |		\
-		  HPB_DMAE_DCR_SMDL |		\
-		  HPB_DMAE_DCR_SPDS_32BIT |	\
-		  HPB_DMAE_DCR_DPDS_32BIT,	\
-	.port   = _id + (_id << 8),		\
-	.dma_ch = (28 + _id),			\
-}
-
-#define HPBDMA_HPBIF(_id)				\
-{							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DMDL |			\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}, {							\
-	.id	= HPBDMA_SLAVE_HPBIF## _id ##_RX,	\
-	.addr	= 0xffda0000 + (_id * 0x1000),		\
-	.dcr	= HPB_DMAE_DCR_CT |			\
-		  HPB_DMAE_DCR_DIP |			\
-		  HPB_DMAE_DCR_SMDL |			\
-		  HPB_DMAE_DCR_SPDS_32BIT |		\
-		  HPB_DMAE_DCR_DPDS_32BIT,		\
-	.port   = 0x1111,				\
-	.dma_ch = (28 + _id),				\
-}
-
-static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
-	{
-		.id	= HPBDMA_SLAVE_SDHI0_TX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD21_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 21,
-	}, {
-		.id	= HPBDMA_SLAVE_SDHI0_RX,
-		.addr	= 0xffe4c000 + 0x30,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_16BIT |
-			  HPB_DMAE_DCR_DPDS_16BIT,
-		.rstr	= HPB_DMAE_ASYNCRSTR_ASRST21 |
-			  HPB_DMAE_ASYNCRSTR_ASRST22 |
-			  HPB_DMAE_ASYNCRSTR_ASRST23,
-		.mdr	= HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
-		.mdm	= HPB_DMAE_ASYNCMDR_ASMD22_MASK,
-		.port	= 0x0D0C,
-		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
-		.dma_ch	= 22,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
-		.addr	= 0xffe60018,
-		.dcr	= HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DMDL |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0000,
-		.dma_ch	= 14,
-	}, {
-		.id	= HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
-		.addr	= 0xffe6001c,
-		.dcr	= HPB_DMAE_DCR_SMDL |
-			  HPB_DMAE_DCR_SPDS_32BIT |
-			  HPB_DMAE_DCR_DPDS_32BIT,
-		.port	= 0x0101,
-		.dma_ch	= 15,
-	},
-
-	HPBDMA_SSI(0),
-	HPBDMA_SSI(1),
-	HPBDMA_SSI(2),
-	HPBDMA_SSI(3),
-	HPBDMA_SSI(4),
-	HPBDMA_SSI(5),
-	HPBDMA_SSI(6),
-	HPBDMA_SSI(7),
-	HPBDMA_SSI(8),
-
-	HPBDMA_HPBIF(0),
-	HPBDMA_HPBIF(1),
-	HPBDMA_HPBIF(2),
-	HPBDMA_HPBIF(3),
-	HPBDMA_HPBIF(4),
-	HPBDMA_HPBIF(5),
-	HPBDMA_HPBIF(6),
-	HPBDMA_HPBIF(7),
-	HPBDMA_HPBIF(8),
-};
-
-static const struct hpb_dmae_channel hpb_dmae_channels[] = {
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
-	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
-	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX),   /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX),   /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX),   /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX),   /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX),   /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX),   /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX),   /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX),   /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX),   /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
-	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
-};
-
-static struct hpb_dmae_pdata dma_platform_data __initdata = {
-	.slaves			= hpb_dmae_slaves,
-	.num_slaves		= ARRAY_SIZE(hpb_dmae_slaves),
-	.channels		= hpb_dmae_channels,
-	.num_channels		= ARRAY_SIZE(hpb_dmae_channels),
-	.ts_shift		= {
-		[XMIT_SZ_8BIT]	= 0,
-		[XMIT_SZ_16BIT]	= 1,
-		[XMIT_SZ_32BIT]	= 2,
-	},
-	.num_hw_channels	= 39,
-};
-
-static struct resource hpb_dmae_resources[] __initdata = {
-	/* Channel registers */
-	DEFINE_RES_MEM(0xffc08000, 0x1000),
-	/* Common registers */
-	DEFINE_RES_MEM(0xffc09000, 0x170),
-	/* Asynchronous reset registers */
-	DEFINE_RES_MEM(0xffc00300, 4),
-	/* Asynchronous mode registers */
-	DEFINE_RES_MEM(0xffc00400, 4),
-	/* IRQ for DMA channels */
-	DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
-};
-
-static void __init r8a7778_register_hpb_dmae(void)
-{
-	platform_device_register_resndata(NULL, "hpb-dma-engine",
-					  -1, hpb_dmae_resources,
-					  ARRAY_SIZE(hpb_dmae_resources),
-					  &dma_platform_data,
-					  sizeof(dma_platform_data));
-}
-
-void __init r8a7778_add_standard_devices(void)
-{
-	r8a7778_add_dt_devices();
-	r8a7778_register_tmu(0);
-	r8a7778_register_scif(0);
-	r8a7778_register_scif(1);
-	r8a7778_register_scif(2);
-	r8a7778_register_scif(3);
-	r8a7778_register_scif(4);
-	r8a7778_register_scif(5);
-	r8a7778_register_i2c(0);
-	r8a7778_register_i2c(1);
-	r8a7778_register_i2c(2);
-	r8a7778_register_i2c(3);
-	r8a7778_register_hspi(0);
-	r8a7778_register_hspi(1);
-	r8a7778_register_hspi(2);
-
-	r8a7778_register_hpb_dmae();
-}
-
-void __init r8a7778_init_late(void)
-{
-	shmobile_init_late();
-	platform_device_register_full(&ehci_info);
-	platform_device_register_full(&ohci_info);
-}
-
-static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin_resources[] __initdata = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
-};
-
-void __init r8a7778_init_irq_extpin_dt(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	unsigned long tmp;
-
-	if (!icr0) {
-		pr_warn("r8a7778: unable to setup external irq pin mode\n");
-		return;
-	}
-
-	tmp = ioread32(icr0);
-	if (irlm)
-		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-	else
-		tmp &= ~(1 << 23); /* IRL mode - not supported */
-	tmp |= (1 << 21); /* LVLMODE = 1 */
-	iowrite32(tmp, icr0);
-	iounmap(icr0);
-}
-
-void __init r8a7778_init_irq_extpin(int irlm)
-{
-	r8a7778_init_irq_extpin_dt(irlm);
-	if (irlm)
-		platform_device_register_resndata(
-			NULL, "renesas_intc_irqpin", -1,
-			irqpin_resources, ARRAY_SIZE(irqpin_resources),
-			&irqpin_platform_data, sizeof(irqpin_platform_data));
-}
-
-#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-void __init r8a7778_init_irq_dt(void)
+
+static void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
-#endif
 
 	BUG_ON(!base);
 
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
 	irqchip_init();
-#endif
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -624,10 +70,6 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= shmobile_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_late	= shmobile_init_late,
-#ifdef CONFIG_COMMON_CLK
 	.init_time	= r8a7778_timer_init,
-#endif
 	.dt_compat	= r8a7778_compat_dt,
 MACHINE_END
-
-#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 1e572a903f8e..0007ff51d180 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -14,7 +14,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/clk/shmobile.h>
+#include <linux/clk/renesas.h>
 #include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/irq.h>
diff --git a/arch/arm/mach-shmobile/setup-r8a7793.c b/arch/arm/mach-shmobile/setup-r8a7793.c
index 1d2825cb7a65..5fce87f7f254 100644
--- a/arch/arm/mach-shmobile/setup-r8a7793.c
+++ b/arch/arm/mach-shmobile/setup-r8a7793.c
@@ -19,7 +19,7 @@
 #include "common.h"
 #include "rcar-gen2.h"
 
-static const char *r8a7793_boards_compat_dt[] __initconst = {
+static const char * const r8a7793_boards_compat_dt[] __initconst = {
 	"renesas,r8a7793",
 	NULL,
 };
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 9eccde3c7b13..1c6fd11c2f82 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -15,7 +15,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/clk/shmobile.h>
+#include <linux/clk/renesas.h>
 #include <linux/clocksource.h>
 #include <linux/device.h>
 #include <linux/dma-contiguous.h>
@@ -182,8 +182,6 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname,
 	return 0;
 }
 
-struct cma *rcar_gen2_dma_contiguous;
-
 void __init rcar_gen2_reserve(void)
 {
 	struct memory_reserve_config mrc;
@@ -194,8 +192,11 @@ void __init rcar_gen2_reserve(void)
 
 	of_scan_flat_dt(rcar_gen2_scan_mem, &mrc);
 #ifdef CONFIG_DMA_CMA
-	if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size))
+	if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) {
+		static struct cma *rcar_gen2_dma_contiguous;
+
 		dma_contiguous_reserve_area(mrc.size, mrc.base, 0,
 					    &rcar_gen2_dma_contiguous, true);
+	}
 #endif
 }
diff --git a/arch/arm/mach-shmobile/sh-gpio.h b/arch/arm/mach-shmobile/sh-gpio.h
deleted file mode 100644
index 2c4141413db9..000000000000
--- a/arch/arm/mach-shmobile/sh-gpio.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008  Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(void __iomem * addr)
-{
-	__raw_writeb(0x00, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/sh73a0.h b/arch/arm/mach-shmobile/sh73a0.h
index 39646806cf64..50ef24f780b3 100644
--- a/arch/arm/mach-shmobile/sh73a0.h
+++ b/arch/arm/mach-shmobile/sh73a0.h
@@ -1,6 +1,6 @@
 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-extern struct smp_operations sh73a0_smp_ops;
+extern const struct smp_operations sh73a0_smp_ops;
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index baff3b5efed8..3a732199cf5e 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -21,7 +21,9 @@
 #include <linux/delay.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+
 #include "common.h"
+#include "emev2.h"
 
 #define EMEV2_SCU_BASE 0x1e000000
 #define EMEV2_SMU_BASE 0xe0110000
@@ -45,11 +47,10 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 	}
 
 	/* setup EMEV2 specific SCU bits */
-	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
-	shmobile_smp_scu_prepare_cpus(max_cpus);
+	shmobile_smp_scu_prepare_cpus(EMEV2_SCU_BASE, max_cpus);
 }
 
-struct smp_operations emev2_smp_ops __initdata = {
+const struct smp_operations emev2_smp_ops __initconst = {
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 353562b8a5ee..f5c31fbc10b2 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -92,12 +92,9 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
 	__raw_writel(__pa(shmobile_boot_vector), AVECR);
-	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
-	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
 
 	/* setup r8a7779 specific SCU bits */
-	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
-	shmobile_smp_scu_prepare_cpus(max_cpus);
+	shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus);
 
 	r8a7779_pm_init();
 
@@ -117,7 +114,7 @@ static int r8a7779_cpu_kill(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-struct smp_operations r8a7779_smp_ops  __initdata = {
+const struct smp_operations r8a7779_smp_ops  __initconst = {
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/smp-r8a7790.c b/arch/arm/mach-shmobile/smp-r8a7790.c
index 4b33d432a364..f6426c6fdefc 100644
--- a/arch/arm/mach-shmobile/smp-r8a7790.c
+++ b/arch/arm/mach-shmobile/smp-r8a7790.c
@@ -60,7 +60,7 @@ static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
 	rcar_sysc_power_up(&r8a7790_ca7_scu);
 }
 
-struct smp_operations r8a7790_smp_ops __initdata = {
+const struct smp_operations r8a7790_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7790_smp_prepare_cpus,
 	.smp_boot_secondary	= shmobile_smp_apmu_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c
index b2508c0d276b..2d6417af73b5 100644
--- a/arch/arm/mach-shmobile/smp-r8a7791.c
+++ b/arch/arm/mach-shmobile/smp-r8a7791.c
@@ -54,7 +54,7 @@ static int r8a7791_smp_boot_secondary(unsigned int cpu,
 	return shmobile_smp_apmu_boot_secondary(cpu, idle);
 }
 
-struct smp_operations r8a7791_smp_ops __initdata = {
+const struct smp_operations r8a7791_smp_ops __initconst = {
 	.smp_prepare_cpus	= r8a7791_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7791_smp_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index bc2824a036e1..41137404382e 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -52,11 +52,10 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(__pa(shmobile_boot_vector), SBAR);
 
 	/* setup sh73a0 specific SCU bits */
-	shmobile_scu_base = IOMEM(SH73A0_SCU_BASE);
-	shmobile_smp_scu_prepare_cpus(max_cpus);
+	shmobile_smp_scu_prepare_cpus(SH73A0_SCU_BASE, max_cpus);
 }
 
-struct smp_operations sh73a0_smp_ops __initdata = {
+const struct smp_operations sh73a0_smp_ops __initconst = {
 	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c
index 5d92b5dd486b..74b30bade2c1 100644
--- a/arch/arm/mach-shmobile/suspend.c
+++ b/arch/arm/mach-shmobile/suspend.c
@@ -17,6 +17,8 @@
 #include <asm/io.h>
 #include <asm/system_misc.h>
 
+#include "common.h"
+
 static int shmobile_suspend_default_enter(suspend_state_t suspend_state)
 {
 	cpu_do_idle();
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index f1d027aa7a81..ad008e4b0c49 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -18,6 +18,8 @@
 #include <linux/delay.h>
 #include <linux/of_address.h>
 
+#include "common.h"
+
 static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
 					   unsigned int mult, unsigned int div)
 {
@@ -77,24 +79,3 @@ void __init shmobile_init_delay(void)
 			shmobile_setup_delay_hz(max_freq, 2, 4);
 	}
 }
-
-static void __init shmobile_late_time_init(void)
-{
-	/*
-	 * Make sure all compiled-in early timers register themselves.
-	 *
-	 * Run probe() for two "earlytimer" devices, these will be the
-	 * clockevents and clocksource devices respectively. In the event
-	 * that only a clockevents device is available, we -ENODEV on the
-	 * clocksource and the jiffies clocksource is used transparently
-	 * instead. No error handling is necessary here.
-	 */
-	early_platform_driver_register_all("earlytimer");
-	early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init shmobile_earlytimer_init(void)
-{
-	late_time_init = shmobile_late_time_init;
-}
-
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 90efdeb56be5..d0f62eacf59d 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_SOCFPGA
-	bool "Altera SOCFPGA family" if ARCH_MULTI_V7
+	bool "Altera SOCFPGA family"
+	depends on ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index b8f9e238e4ab..ed15db19e561 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -5,3 +5,5 @@
 obj-y					:= socfpga.o
 obj-$(CONFIG_SMP)	+= headsmp.o platsmp.o
 obj-$(CONFIG_SOCFPGA_SUSPEND)	+= pm.o self-refresh.o
+obj-$(CONFIG_EDAC_ALTERA_L2C)	+= l2_cache.o
+obj-$(CONFIG_EDAC_ALTERA_OCRAM)	+= ocram.o
diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
index 5bc6ea87cdf7..575195be6687 100644
--- a/arch/arm/mach-socfpga/core.h
+++ b/arch/arm/mach-socfpga/core.h
@@ -36,6 +36,8 @@
 
 extern void socfpga_init_clocks(void);
 extern void socfpga_sysmgr_init(void);
+void socfpga_init_l2_ecc(void);
+void socfpga_init_ocram_ecc(void);
 
 extern void __iomem *sys_manager_base_addr;
 extern void __iomem *rst_manager_base_addr;
diff --git a/arch/arm/mach-socfpga/l2_cache.c b/arch/arm/mach-socfpga/l2_cache.c
new file mode 100644
index 000000000000..e3907ab58d05
--- /dev/null
+++ b/arch/arm/mach-socfpga/l2_cache.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright Altera Corporation (C) 2016. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+void socfpga_init_l2_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_l2_edac_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-l2-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-l2-ecc in dtb\n");
+		return;
+	}
+
+	mapped_l2_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_l2_edac_addr) {
+		pr_err("Unable to find L2 ECC mapping in dtb\n");
+		return;
+	}
+
+	/* Enable ECC */
+	writel(0x01, mapped_l2_edac_addr);
+	iounmap(mapped_l2_edac_addr);
+}
diff --git a/arch/arm/mach-socfpga/ocram.c b/arch/arm/mach-socfpga/ocram.c
new file mode 100644
index 000000000000..60ec643ac2be
--- /dev/null
+++ b/arch/arm/mach-socfpga/ocram.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright Altera Corporation (C) 2016. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/io.h>
+#include <linux/genalloc.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#define ALTR_OCRAM_CLEAR_ECC          0x00000018
+#define ALTR_OCRAM_ECC_EN             0x00000019
+
+void socfpga_init_ocram_ecc(void)
+{
+	struct device_node *np;
+	void __iomem *mapped_ocr_edac_addr;
+
+	/* Find the OCRAM EDAC device tree node */
+	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
+	if (!np) {
+		pr_err("Unable to find socfpga-ocram-ecc\n");
+		return;
+	}
+
+	mapped_ocr_edac_addr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!mapped_ocr_edac_addr) {
+		pr_err("Unable to map OCRAM ecc regs.\n");
+		return;
+	}
+
+	/* Clear any pending OCRAM ECC interrupts, then enable ECC */
+	writel(ALTR_OCRAM_CLEAR_ECC, mapped_ocr_edac_addr);
+	writel(ALTR_OCRAM_ECC_EN, mapped_ocr_edac_addr);
+
+	iounmap(mapped_ocr_edac_addr);
+}
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 15c8ce8965f4..07945748b571 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -94,6 +94,7 @@ static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
 	scu_enable(socfpga_scu_base_addr);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -116,8 +117,9 @@ static int socfpga_cpu_kill(unsigned int cpu)
 {
 	return 1;
 }
+#endif
 
-static struct smp_operations socfpga_smp_ops __initdata = {
+static const struct smp_operations socfpga_smp_ops __initconst = {
 	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
 	.smp_boot_secondary	= socfpga_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
@@ -126,7 +128,7 @@ static struct smp_operations socfpga_smp_ops __initdata = {
 #endif
 };
 
-static struct smp_operations socfpga_a10_smp_ops __initdata = {
+static const struct smp_operations socfpga_a10_smp_ops __initconst = {
 	.smp_prepare_cpus	= socfpga_smp_prepare_cpus,
 	.smp_boot_secondary	= socfpga_a10_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index a1c0efaa8794..7e0aad2ec3d1 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -59,6 +59,11 @@ static void __init socfpga_init_irq(void)
 {
 	irqchip_init();
 	socfpga_sysmgr_init();
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_L2C))
+		socfpga_init_l2_ecc();
+
+	if (IS_ENABLED(CONFIG_EDAC_ALTERA_OCRAM))
+		socfpga_init_ocram_ecc();
 }
 
 static void socfpga_cyclone5_restart(enum reboot_mode mode, const char *cmd)
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index b6f4bda273b3..ea9ea95630bd 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -3,7 +3,8 @@
 #
 
 menuconfig PLAT_SPEAR
-	bool "ST SPEAr Family" if ARCH_MULTI_V7 || ARCH_MULTI_V5
+	bool "ST SPEAr Family"
+	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
diff --git a/arch/arm/mach-spear/Makefile.boot b/arch/arm/mach-spear/Makefile.boot
deleted file mode 100644
index 4674a4c221db..000000000000
--- a/arch/arm/mach-spear/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index 06640914d9a0..909b97c0b237 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -39,7 +39,7 @@ void spear_restart(enum reboot_mode, const char *);
 void spear13xx_secondary_startup(void);
 void spear13xx_cpu_die(unsigned int cpu);
 
-extern struct smp_operations spear13xx_smp_ops;
+extern const struct smp_operations spear13xx_smp_ops;
 
 #ifdef CONFIG_MACH_SPEAR1310
 void __init spear1310_clk_init(void __iomem *misc_base, void __iomem *ras_base);
diff --git a/arch/arm/mach-spear/hotplug.c b/arch/arm/mach-spear/hotplug.c
index d97749c642ce..12edd1cf8a12 100644
--- a/arch/arm/mach-spear/hotplug.c
+++ b/arch/arm/mach-spear/hotplug.c
@@ -80,7 +80,7 @@ static inline void spear13xx_do_lowpower(unsigned int cpu, int *spurious)
  *
  * Called with IRQs disabled
  */
-void __ref spear13xx_cpu_die(unsigned int cpu)
+void spear13xx_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
diff --git a/arch/arm/mach-spear/platsmp.c b/arch/arm/mach-spear/platsmp.c
index fd4297713d67..8d1e2d551786 100644
--- a/arch/arm/mach-spear/platsmp.c
+++ b/arch/arm/mach-spear/platsmp.c
@@ -120,7 +120,7 @@ static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
 	__raw_writel(virt_to_phys(spear13xx_secondary_startup), SYS_LOCATION);
 }
 
-struct smp_operations spear13xx_smp_ops __initdata = {
+const struct smp_operations spear13xx_smp_ops __initconst = {
        .smp_init_cpus		= spear13xx_smp_init_cpus,
        .smp_prepare_cpus	= spear13xx_smp_prepare_cpus,
        .smp_secondary_init	= spear13xx_secondary_init,
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 125865daaf17..a196d14f65f5 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,8 +1,10 @@
 menuconfig ARCH_STI
-	bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
+	bool "STMicroelectronics Consumer Electronics SOCs"
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select ST_IRQCHIP
 	select ARM_GLOBAL_TIMER
+	select CLKSRC_ST_LPC
 	select PINCTRL
 	select PINCTRL_ST
 	select MFD_SYSCON
diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c
index c4ad6eae67fa..ea5a2277ee46 100644
--- a/arch/arm/mach-sti/platsmp.c
+++ b/arch/arm/mach-sti/platsmp.c
@@ -156,7 +156,7 @@ static void __init sti_smp_prepare_cpus(unsigned int max_cpus)
 	}
 }
 
-struct smp_operations __initdata sti_smp_ops = {
+const struct smp_operations sti_smp_ops __initconst = {
 	.smp_prepare_cpus	= sti_smp_prepare_cpus,
 	.smp_secondary_init	= sti_secondary_init,
 	.smp_boot_secondary	= sti_boot_secondary,
diff --git a/arch/arm/mach-sti/smp.h b/arch/arm/mach-sti/smp.h
index ae22707d301f..d8a2f8758490 100644
--- a/arch/arm/mach-sti/smp.h
+++ b/arch/arm/mach-sti/smp.h
@@ -12,7 +12,7 @@
 #ifndef __MACH_STI_SMP_H
 #define __MACH_STI_SMP_H
 
-extern struct smp_operations	sti_smp_ops;
+extern const struct smp_operations sti_smp_ops;
 
 void sti_secondary_startup(void);
 
diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c
index f2ad7723d034..ceee47735eec 100644
--- a/arch/arm/mach-stm32/board-dt.c
+++ b/arch/arm/mach-stm32/board-dt.c
@@ -10,6 +10,7 @@
 
 static const char *const stm32_compat[] __initconst = {
 	"st,stm32f429",
+	"st,stm32f469",
 	NULL
 };
 
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 4efe2d43a126..c124d658b350 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_SUNXI
-	bool "Allwinner SoCs" if ARCH_MULTI_V7
+	bool "Allwinner SoCs"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_RESET_CONTROLLER
 	select CLKSRC_MMIO
diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
index e8483ec79d67..6642267812c9 100644
--- a/arch/arm/mach-sunxi/platsmp.c
+++ b/arch/arm/mach-sunxi/platsmp.c
@@ -116,7 +116,7 @@ static int sun6i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-static struct smp_operations sun6i_smp_ops __initdata = {
+static const struct smp_operations sun6i_smp_ops __initconst = {
 	.smp_prepare_cpus	= sun6i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun6i_smp_boot_secondary,
 };
@@ -185,7 +185,7 @@ static int sun8i_smp_boot_secondary(unsigned int cpu,
 	return 0;
 }
 
-struct smp_operations sun8i_smp_ops __initdata = {
+static const struct smp_operations sun8i_smp_ops __initconst = {
 	.smp_prepare_cpus	= sun8i_smp_prepare_cpus,
 	.smp_boot_secondary	= sun8i_smp_boot_secondary,
 };
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 223c9e99380d..3c156190a1d4 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -26,10 +26,11 @@ static const char * const sunxi_board_dt_compat[] = {
 	"allwinner,sun4i-a10",
 	"allwinner,sun5i-a10s",
 	"allwinner,sun5i-a13",
+	"allwinner,sun5i-r8",
 	NULL,
 };
 
-DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
+DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
 	.dt_compat	= sunxi_board_dt_compat,
 	.init_late	= sunxi_dt_cpufreq_init,
 MACHINE_END
@@ -68,6 +69,7 @@ MACHINE_END
 static const char * const sun8i_board_dt_compat[] = {
 	"allwinner,sun8i-a23",
 	"allwinner,sun8i-a33",
+	"allwinner,sun8i-a83t",
 	"allwinner,sun8i-h3",
 	NULL,
 };
diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig
new file mode 100644
index 000000000000..ebe15b93bbe8
--- /dev/null
+++ b/arch/arm/mach-tango/Kconfig
@@ -0,0 +1,13 @@
+config ARCH_TANGO
+	bool "Sigma Designs Tango4 (SMP87xx)"
+	depends on ARCH_MULTI_V7
+	# Cortex-A9 MPCore r3p0, PL310 r3p2
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_775420
+	select ARM_GIC
+	select CLKSRC_TANGO_XTAL
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD
+	select TANGO_IRQ
diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile
new file mode 100644
index 000000000000..f33935e42e77
--- /dev/null
+++ b/arch/arm/mach-tango/Makefile
@@ -0,0 +1,5 @@
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec)
+
+obj-y += setup.o smc.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c
new file mode 100644
index 000000000000..a21f55e000d2
--- /dev/null
+++ b/arch/arm/mach-tango/platsmp.c
@@ -0,0 +1,16 @@
+#include <linux/init.h>
+#include <linux/smp.h>
+#include "smc.h"
+
+static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	tango_set_aux_boot_addr(virt_to_phys(secondary_startup));
+	tango_start_aux_core(cpu);
+	return 0;
+}
+
+static const struct smp_operations tango_smp_ops __initconst = {
+	.smp_boot_secondary	= tango_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops);
diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c
new file mode 100644
index 000000000000..f14b6c7d255b
--- /dev/null
+++ b/arch/arm/mach-tango/setup.c
@@ -0,0 +1,17 @@
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "smc.h"
+
+static void tango_l2c_write(unsigned long val, unsigned int reg)
+{
+	if (reg == L2X0_CTRL)
+		tango_set_l2_control(val);
+}
+
+static const char *const tango_dt_compat[] = { "sigma,tango4", NULL };
+
+DT_MACHINE_START(TANGO_DT, "Sigma Tango DT")
+	.dt_compat	= tango_dt_compat,
+	.l2c_aux_mask	= ~0,
+	.l2c_write_sec	= tango_l2c_write,
+MACHINE_END
diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S
new file mode 100644
index 000000000000..5d932ce3c1bd
--- /dev/null
+++ b/arch/arm/mach-tango/smc.S
@@ -0,0 +1,9 @@
+#include <linux/linkage.h>
+
+ENTRY(tango_smc)
+	push	{lr}
+	mov	ip, r1
+	dsb	/* This barrier is probably unnecessary */
+	smc	#0
+	pop	{pc}
+ENDPROC(tango_smc)
diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h
new file mode 100644
index 000000000000..7a4af35cc390
--- /dev/null
+++ b/arch/arm/mach-tango/smc.h
@@ -0,0 +1,5 @@
+extern int tango_smc(unsigned int val, unsigned int service);
+
+#define tango_set_l2_control(val)	tango_smc(val, 0x102)
+#define tango_start_aux_core(val)	tango_smc(val, 0x104)
+#define tango_set_aux_boot_addr(val)	tango_smc((unsigned int)val, 0x105)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 0fa4c5f8b1be..0fa8b84ed657 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_TEGRA
-	bool "NVIDIA Tegra" if ARCH_MULTI_V7
+	bool "NVIDIA Tegra"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_AMBA
@@ -12,57 +13,5 @@ menuconfig ARCH_TEGRA
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 	select SOC_BUS
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
 	help
 	  This enables support for NVIDIA Tegra based systems.
-
-if ARCH_TEGRA
-
-config ARCH_TEGRA_2x_SOC
-	bool "Enable support for Tegra20 family"
-	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
-	select ARM_ERRATA_720789
-	select ARM_ERRATA_754327 if SMP
-	select ARM_ERRATA_764369 if SMP
-	select PINCTRL_TEGRA20
-	select PL310_ERRATA_727915 if CACHE_L2X0
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config ARCH_TEGRA_3x_SOC
-	bool "Enable support for Tegra30 family"
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
-	select PINCTRL_TEGRA30
-	select PL310_ERRATA_769419 if CACHE_L2X0
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T30 processor family, based on the
-	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
-
-config ARCH_TEGRA_114_SOC
-	bool "Enable support for Tegra114 family"
-	select ARM_ERRATA_798181 if SMP
-	select ARM_L1_CACHE_SHIFT_6
-	select HAVE_ARM_ARCH_TIMER
-	select PINCTRL_TEGRA114
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T114 processor family, based on the
-	  ARM CortexA15MP CPU
-
-config ARCH_TEGRA_124_SOC
-	bool "Enable support for Tegra124 family"
-	select ARM_L1_CACHE_SHIFT_6
-	select HAVE_ARM_ARCH_TIMER
-	select PINCTRL_TEGRA124
-	select TEGRA_TIMER
-	help
-	  Support for NVIDIA Tegra T124 processor family, based on the
-	  ARM CortexA15MP CPU
-
-endif
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fbe74c6806f3..52db8bf7e153 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -17,36 +17,39 @@
  *
  */
 
+#include <linux/property.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
-#include <linux/rfkill-gpio.h>
 
 #include "board.h"
 
-static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
-	.name	= "wifi_rfkill",
-	.type	= RFKILL_TYPE_WLAN,
+static struct property_entry __initdata wifi_rfkill_prop[] = {
+	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
+	PROPERTY_ENTRY_STRING("type", "wlan"),
+	{ },
+};
+
+static struct property_set __initdata wifi_rfkill_pset = {
+	.properties = wifi_rfkill_prop,
 };
 
 static struct platform_device wifi_rfkill_device = {
 	.name	= "rfkill_gpio",
 	.id	= -1,
-	.dev	= {
-		.platform_data = &wifi_rfkill_platform_data,
-	},
 };
 
 static struct gpiod_lookup_table wifi_gpio_lookup = {
 	.dev_id = "rfkill_gpio",
 	.table = {
-		GPIO_LOOKUP_IDX("tegra-gpio", 25, NULL, 0, 0),
-		GPIO_LOOKUP_IDX("tegra-gpio", 85, NULL, 1, 0),
+		GPIO_LOOKUP("tegra-gpio", 25, "reset", 0),
+		GPIO_LOOKUP("tegra-gpio", 85, "shutdown", 0),
 		{ },
 	},
 };
 
 void __init tegra_paz00_wifikill_init(void)
 {
+	platform_device_add_properties(&wifi_rfkill_device, &wifi_rfkill_pset);
 	gpiod_add_lookup_table(&wifi_gpio_lookup);
 	platform_device_register(&wifi_rfkill_device);
 }
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 5900cc44f780..1f6fb808e236 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -1,4 +1,4 @@
-extern struct smp_operations tegra_smp_ops;
+extern const struct smp_operations tegra_smp_ops;
 
 extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index 6fc71f1534b0..1b129899a277 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -37,7 +37,7 @@ int tegra_cpu_kill(unsigned cpu)
  *
  * Called with IRQs disabled
  */
-void __ref tegra_cpu_die(unsigned int cpu)
+void tegra_cpu_die(unsigned int cpu)
 {
 	if (!tegra_hotplug_shutdown) {
 		WARN(1, "hotplug is not yet initialized\n");
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index b45086666648..f3f61dbbda97 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -192,7 +192,7 @@ static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
 		scu_enable(IO_ADDRESS(scu_a9_get_base()));
 }
 
-struct smp_operations tegra_smp_ops __initdata = {
+const struct smp_operations tegra_smp_ops __initconst = {
 	.smp_prepare_cpus	= tegra_smp_prepare_cpus,
 	.smp_secondary_init	= tegra_secondary_init,
 	.smp_boot_secondary	= tegra_boot_secondary,
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index e6b684e14322..f5d19667484e 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -231,8 +231,11 @@ ENDPROC(tegra20_cpu_is_resettable_soon)
  * tegra20_tear_down_core in IRAM
  */
 ENTRY(tegra20_sleep_core_finish)
+	mov     r4, r0
 	/* Flush, disable the L1 data cache and exit SMP */
+	mov     r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
+	mov     r0, r4
 
 	mov32	r3, tegra_shut_off_mmu
 	add	r3, r3, r0
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 9a2f0b051e10..16e5ff03383c 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -242,8 +242,11 @@ ENDPROC(tegra30_cpu_shutdown)
  * tegra30_tear_down_core in IRAM
  */
 ENTRY(tegra30_sleep_core_finish)
+	mov	r4, r0
 	/* Flush, disable the L1 data cache and exit SMP */
+	mov	r0, #TEGRA_FLUSH_CACHE_ALL
 	bl	tegra_disable_clean_inv_dcache
+	mov	r0, r4
 
 	/*
 	 * Preload all the address literals that are needed for the
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index bc51a71394af..301a98498453 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -1,6 +1,6 @@
 menuconfig ARCH_U300
-	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
-	depends on MMU
+	bool "ST-Ericsson U300 Series"
+	depends on ARCH_MULTI_V5 && MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
deleted file mode 100644
index 87811de0bd94..000000000000
--- a/arch/arm/mach-u300/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x48008000
-params_phys-y	:= 0x48000100
-# This isn't used.
-#initrd_phys-y	:= 0x48800000
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index b640458fd757..82dddee3a469 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -6,6 +6,7 @@ config ARCH_UNIPHIER
 	select ARM_GIC
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
+	select PINCTRL
 	help
 	  Support for UniPhier SoC family developed by Socionext Inc.
 	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 60bd2265f753..1233f9b610bc 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -1,2 +1,2 @@
 obj-y			:= uniphier.o
-obj-$(CONFIG_SMP)	+= platsmp.o
+obj-$(CONFIG_SMP)	+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-uniphier/headsmp.S b/arch/arm/mach-uniphier/headsmp.S
new file mode 100644
index 000000000000..c819dff84546
--- /dev/null
+++ b/arch/arm/mach-uniphier/headsmp.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/cp15.h>
+
+ENTRY(uniphier_smp_trampoline)
+ARM_BE8(setend	be)			@ ensure we are in BE8 mode
+	mrc	p15, 0, r0, c0, c0, 5	@ MPIDR (Multiprocessor Affinity Reg)
+	and  	r2, r0, #0x3		@ CPU ID
+	ldr	r1, uniphier_smp_trampoline_jump
+	ldr	r3, uniphier_smp_trampoline_poll_addr
+	mrc	p15, 0, r0, c1, c0, 0	@ SCTLR (System Control Register)
+	orr	r0, r0, #CR_I		@ Enable ICache
+	bic	r0, r0, #(CR_C | CR_M)	@ Disable MMU and Dcache
+	mcr	p15, 0, r0, c1, c0, 0
+	b	1f			@ cache the following 5 instructions
+0:	wfe
+1:	ldr	r0, [r3]
+	cmp	r0, r2
+	bxeq	r1			@ branch to secondary_startup
+	b	0b
+	.globl	uniphier_smp_trampoline_jump
+uniphier_smp_trampoline_jump:
+	.word	0			@ set virt_to_phys(secondary_startup)
+	.globl	uniphier_smp_trampoline_poll_addr
+uniphier_smp_trampoline_poll_addr:
+	.word	0			@ set CPU ID to be kicked to this reg
+	.globl	uniphier_smp_trampoline_end
+uniphier_smp_trampoline_end:
+ENDPROC(uniphier_smp_trampoline)
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
index 4b784f721135..db04142f88bc 100644
--- a/arch/arm/mach-uniphier/platsmp.c
+++ b/arch/arm/mach-uniphier/platsmp.c
@@ -12,73 +12,206 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/sizes.h>
-#include <linux/compiler.h>
+#define pr_fmt(fmt)		"uniphier: " fmt
+
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/regmap.h>
-#include <linux/mfd/syscon.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/sizes.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/pgtable.h>
 #include <asm/smp.h>
 #include <asm/smp_scu.h>
 
-static struct regmap *sbcm_regmap;
+/*
+ * The secondary CPUs check this register from the boot ROM for the jump
+ * destination.  After that, it can be reused as a scratch register.
+ */
+#define UNIPHIER_SMPCTRL_ROM_RSV2	0x208
 
-static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+static void __iomem *uniphier_smp_rom_boot_rsv2;
+static unsigned int uniphier_smp_max_cpus;
+
+extern char uniphier_smp_trampoline;
+extern char uniphier_smp_trampoline_jump;
+extern char uniphier_smp_trampoline_poll_addr;
+extern char uniphier_smp_trampoline_end;
+
+/*
+ * Copy trampoline code to the tail of the 1st section of the page table used
+ * in the boot ROM.  This area is directly accessible by the secondary CPUs
+ * for all the UniPhier SoCs.
+ */
+static const phys_addr_t uniphier_smp_trampoline_dest_end = SECTION_SIZE;
+static phys_addr_t uniphier_smp_trampoline_dest;
+
+static int __init uniphier_smp_copy_trampoline(phys_addr_t poll_addr)
 {
-	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-	unsigned long scu_base_phys = 0;
-	void __iomem *scu_base;
+	size_t trmp_size;
+	static void __iomem *trmp_base;
 
-	sbcm_regmap = syscon_regmap_lookup_by_compatible(
-			"socionext,uniphier-system-bus-controller-misc");
-	if (IS_ERR(sbcm_regmap)) {
-		pr_err("failed to regmap system-bus-controller-misc\n");
-		goto err;
+	if (!uniphier_cache_l2_is_enabled()) {
+		pr_warn("outer cache is needed for SMP, but not enabled\n");
+		return -ENODEV;
+	}
+
+	uniphier_cache_l2_set_locked_ways(1);
+
+	outer_flush_all();
+
+	trmp_size = &uniphier_smp_trampoline_end - &uniphier_smp_trampoline;
+	uniphier_smp_trampoline_dest = uniphier_smp_trampoline_dest_end -
+								trmp_size;
+
+	uniphier_cache_l2_touch_range(uniphier_smp_trampoline_dest,
+				      uniphier_smp_trampoline_dest_end);
+
+	trmp_base = ioremap_cache(uniphier_smp_trampoline_dest, trmp_size);
+	if (!trmp_base) {
+		pr_err("failed to map trampoline destination area\n");
+		return -ENOMEM;
+	}
+
+	memcpy(trmp_base, &uniphier_smp_trampoline, trmp_size);
+
+	writel(virt_to_phys(secondary_startup),
+	       trmp_base + (&uniphier_smp_trampoline_jump -
+			    &uniphier_smp_trampoline));
+
+	writel(poll_addr, trmp_base + (&uniphier_smp_trampoline_poll_addr -
+				       &uniphier_smp_trampoline));
+
+	flush_cache_all();	/* flush out trampoline code to outer cache */
+
+	iounmap(trmp_base);
+
+	return 0;
+}
+
+static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
+{
+	struct device_node *np;
+	struct resource res;
+	phys_addr_t rom_rsv2_phys;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
+	of_node_put(np);
+	ret = of_address_to_resource(np, 0, &res);
+	if (!ret) {
+		rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
+	} else {
+		/* try old binding too */
+		np = of_find_compatible_node(NULL, NULL,
+					     "socionext,uniphier-system-bus-controller");
+		of_node_put(np);
+		ret = of_address_to_resource(np, 1, &res);
+		if (ret) {
+			pr_err("failed to get resource of SMP control\n");
+			return ret;
+		}
+		rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2;
 	}
 
+	ret = uniphier_smp_copy_trampoline(rom_rsv2_phys);
+	if (ret)
+		return ret;
+
+	uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
+	if (!uniphier_smp_rom_boot_rsv2) {
+		pr_err("failed to map ROM_BOOT_RSV2 register\n");
+		return -ENOMEM;
+	}
+
+	writel(uniphier_smp_trampoline_dest, uniphier_smp_rom_boot_rsv2);
+	asm("sev"); /* Bring up all secondary CPUs to the trampoline code */
+
+	uniphier_smp_max_cpus = max_cpus;	/* save for later use */
+
+	return 0;
+}
+
+static void __init uniphier_smp_unprepare_trampoline(void)
+{
+	iounmap(uniphier_smp_rom_boot_rsv2);
+
+	if (uniphier_smp_trampoline_dest)
+		outer_inv_range(uniphier_smp_trampoline_dest,
+				uniphier_smp_trampoline_dest_end);
+
+	uniphier_cache_l2_set_locked_ways(0);
+}
+
+static int __init uniphier_smp_enable_scu(void)
+{
+	unsigned long scu_base_phys = 0;
+	void __iomem *scu_base;
+
 	if (scu_a9_has_base())
 		scu_base_phys = scu_a9_get_base();
 
 	if (!scu_base_phys) {
 		pr_err("failed to get scu base\n");
-		goto err;
+		return -ENODEV;
 	}
 
 	scu_base = ioremap(scu_base_phys, SZ_128);
 	if (!scu_base) {
-		pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys);
-		goto err;
+		pr_err("failed to map scu base\n");
+		return -ENOMEM;
 	}
 
 	scu_enable(scu_base);
 	iounmap(scu_base);
 
+	return 0;
+}
+
+static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus)
+{
+	static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+	int ret;
+
+	ret = uniphier_smp_prepare_trampoline(max_cpus);
+	if (ret)
+		goto err;
+
+	ret = uniphier_smp_enable_scu();
+	if (ret)
+		goto err;
+
 	return;
 err:
 	pr_warn("disabling SMP\n");
 	init_cpu_present(&only_cpu_0);
-	sbcm_regmap = NULL;
+	uniphier_smp_unprepare_trampoline();
 }
 
-static int uniphier_boot_secondary(unsigned int cpu,
-				   struct task_struct *idle)
+static int __init uniphier_smp_boot_secondary(unsigned int cpu,
+					      struct task_struct *idle)
 {
-	int ret;
+	if (WARN_ON_ONCE(!uniphier_smp_rom_boot_rsv2))
+		return -EFAULT;
 
-	if (!sbcm_regmap)
-		return -ENODEV;
+	writel(cpu, uniphier_smp_rom_boot_rsv2);
+	readl(uniphier_smp_rom_boot_rsv2); /* relax */
 
-	ret = regmap_write(sbcm_regmap, 0x1208,
-			   virt_to_phys(secondary_startup));
-	if (!ret)
-		asm("sev"); /* wake up secondary CPU */
+	asm("sev"); /* wake up secondary CPUs sleeping in the trampoline */
+
+	if (cpu == uniphier_smp_max_cpus - 1) {
+		/* clean up resources if this is the last CPU */
+		uniphier_smp_unprepare_trampoline();
+	}
 
-	return ret;
+	return 0;
 }
 
-struct smp_operations uniphier_smp_ops __initdata = {
+static const struct smp_operations uniphier_smp_ops __initconst = {
 	.smp_prepare_cpus	= uniphier_smp_prepare_cpus,
-	.smp_boot_secondary	= uniphier_boot_secondary,
+	.smp_boot_secondary	= uniphier_smp_boot_secondary,
 };
 CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp",
 		      &uniphier_smp_ops);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c9ac19b24e5a..3185081bdb2c 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,6 +1,6 @@
 menuconfig ARCH_U8500
-	bool "ST-Ericsson U8500 Series" if ARCH_MULTI_V7
-	depends on MMU
+	bool "ST-Ericsson U8500 Series"
+	depends on ARCH_MULTI_V7 && MMU
 	select AB8500_CORE
 	select ABX500_CORE
 	select ARCH_REQUIRE_GPIOLIB
@@ -32,6 +32,7 @@ config UX500_SOC_DB8500
 	select PINCTRL_AB8540
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
+	select CLKSRC_DBX500_PRCMU
 	select PM_GENERIC_DOMAINS if PM
 
 config MACH_MOP500
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c8643ac5db71..edfff1ae1f8d 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o id.o timer.o pm.o
+obj-y				:= cpu.o id.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500-regulators.o \
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
deleted file mode 100644
index 760a0efe7580..000000000000
--- a/arch/arm/mach-ux500/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index f80560318c58..a557955472ea 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -76,17 +76,19 @@ static struct arm_pmu_platdata db8500_pmu_platdata = {
 static const char *db8500_read_soc_id(void)
 {
 	void __iomem *uid;
+	const char *retstr;
 
 	uid = ioremap(U8500_BB_UID_BASE, 0x20);
 	if (!uid)
 		return NULL;
 	/* Throw these device-specific numbers into the entropy pool */
 	add_device_randomness(uid, 0x14);
-	return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+	retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
 			 readl((u32 *)uid+0),
 			 readl((u32 *)uid+1), readl((u32 *)uid+2),
 			 readl((u32 *)uid+3), readl((u32 *)uid+4));
 	iounmap(uid);
+	return retstr;
 }
 
 static struct device * __init db8500_soc_device_init(void)
@@ -156,8 +158,6 @@ static const char * stericsson_dt_platform_compat[] = {
 DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 41b81c4fbe63..82156cbc22ce 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -9,7 +9,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/mfd/dbx500-prcmu.h>
-#include <linux/clksrc-dbx500-prcmu.h>
 #include <linux/sys_soc.h>
 #include <linux/err.h>
 #include <linux/slab.h>
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index 2bc00b085e38..1cbed0331fd3 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -21,7 +21,7 @@
  *
  * Called with IRQs disabled
  */
-void __ref ux500_cpu_die(unsigned int cpu)
+void ux500_cpu_die(unsigned int cpu)
 {
 	/* directly enter low power state, skipping secure registers */
 	for (;;) {
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 70766b963758..88b8ab4f300c 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -98,7 +98,7 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-struct smp_operations ux500_smp_ops __initdata = {
+static const struct smp_operations ux500_smp_ops __initconst = {
 	.smp_prepare_cpus	= ux500_smp_prepare_cpus,
 	.smp_boot_secondary	= ux500_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index 65876eac0761..c704254ab67c 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -12,7 +12,6 @@
 #define __ASM_ARCH_SETUP_H
 
 #include <asm/mach/arch.h>
-#include <asm/mach/time.h>
 #include <linux/init.h>
 #include <linux/mfd/abx500/ab8500.h>
 
@@ -24,8 +23,6 @@ extern void __init ux500_init_irq(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
-extern void ux500_timer_init(void);
-
 extern void ux500_cpu_die(unsigned int cpu);
 
 #endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
deleted file mode 100644
index 8d2d233f8e6c..000000000000
--- a/arch/arm/mach-ux500/timer.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * License Terms: GNU General Public License v2
- * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
- */
-#include <linux/io.h>
-#include <linux/errno.h>
-#include <linux/clksrc-dbx500-prcmu.h>
-#include <linux/clocksource.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include "setup.h"
-
-#include "db8500-regs.h"
-#include "id.h"
-
-static const struct of_device_id prcmu_timer_of_match[] __initconst = {
-	{ .compatible = "stericsson,db8500-prcmu-timer-4", },
-	{ },
-};
-
-void __init ux500_timer_init(void)
-{
-	void __iomem *prcmu_timer_base;
-	void __iomem *tmp_base;
-	struct device_node *np;
-
-	if (cpu_is_u8500_family() || cpu_is_ux540_family())
-		prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
-	else
-		ux500_unknown_soc();
-
-	np = of_find_matching_node(NULL, prcmu_timer_of_match);
-	if (!np)
-		goto dt_fail;
-
-	tmp_base = of_iomap(np, 0);
-	if (!tmp_base)
-		goto dt_fail;
-
-	prcmu_timer_base = tmp_base;
-
-dt_fail:
-	clksrc_dbx500_prcmu_init(prcmu_timer_base);
-	clocksource_probe();
-}
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index 1dba3688275f..b0cc26284fc9 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -1,33 +1,19 @@
-menu "Versatile platform type"
-	depends on ARCH_VERSATILE
-
-config ARCH_VERSATILE_PB
-	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
-	default y
+config ARCH_VERSATILE
+	bool "ARM Ltd. Versatile family"
+	depends on ARCH_MULTI_V5
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select ARM_VIC
+	select CLKSRC_VERSATILE
+	select COMMON_CLK_VERSATILE
 	select CPU_ARM926T
+	select ICST
+	select MFD_SYSCON
 	select MIGHT_HAVE_PCI
+	select PLAT_VERSATILE
+	select POWER_RESET
+	select POWER_RESET_VERSATILE
+	select VERSATILE_FPGA_IRQ
 	help
-	  Include support for the ARM(R) Versatile Platform Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_AB
-	bool "Support Versatile Application Baseboard for ARM926EJ-S"
-	select CPU_ARM926T
-	help
-	  Include support for the ARM(R) Versatile Application Baseboard
-	  for the ARM926EJ-S.
-
-config MACH_VERSATILE_DT
-	bool "Support Versatile platform from device tree"
-	select CPU_ARM926T
-	select USE_OF
-	help
-	  Include support for the ARM(R) Versatile/PB platform,
-	  using the device tree for discovery
-
-config MACH_VERSATILE_AUTO
-	def_bool y
-	depends on !ARCH_VERSATILE_PB && !MACH_VERSATILE_AB
-	select MACH_VERSATILE_DT
+	  This enables support for ARM Ltd Versatile board.
 
-endmenu
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 81fa3fe25e1a..41b124b5107b 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -2,8 +2,4 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o
-obj-$(CONFIG_ARCH_VERSATILE_PB)		+= versatile_pb.o
-obj-$(CONFIG_MACH_VERSATILE_AB)		+= versatile_ab.o
-obj-$(CONFIG_MACH_VERSATILE_DT)		+= versatile_dt.o
-obj-$(CONFIG_PCI)			+= pci.o
+obj-y					:= versatile_dt.o
diff --git a/arch/arm/mach-versatile/Makefile.boot b/arch/arm/mach-versatile/Makefile.boot
deleted file mode 100644
index ff0a4b5b0a82..000000000000
--- a/arch/arm/mach-versatile/Makefile.boot
+++ /dev/null
@@ -1,4 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
-
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
deleted file mode 100644
index 23a04fe5d2ad..000000000000
--- a/arch/arm/mach-versatile/core.c
+++ /dev/null
@@ -1,808 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/amba/pl022.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-vic.h>
-#include <linux/irqchip/versatile-fpga.h>
-#include <linux/gfp.h>
-#include <linux/clkdev.h>
-#include <linux/mtd/physmap.h>
-#include <linux/bitops.h>
-#include <linux/reboot.h>
-
-#include <clocksource/timer-sp804.h>
-
-#include <asm/irq.h>
-#include <asm/hardware/icst.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/platform.h>
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-/*
- * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
- * is the (PA >> 12).
- *
- * Setup a VA for the Versatile Vectored Interrupt Controller.
- */
-#define VA_VIC_BASE		__io_address(VERSATILE_VIC_BASE)
-#define VA_SIC_BASE		__io_address(VERSATILE_SIC_BASE)
-
-/* These PIC IRQs are valid in each configuration */
-#define PIC_VALID_ALL	BIT(SIC_INT_KMI0) | BIT(SIC_INT_KMI1) | \
-			BIT(SIC_INT_SCI3) | BIT(SIC_INT_UART3) | \
-			BIT(SIC_INT_CLCD) | BIT(SIC_INT_TOUCH) | \
-			BIT(SIC_INT_KEYPAD) | BIT(SIC_INT_DoC) | \
-			BIT(SIC_INT_USB) | BIT(SIC_INT_PCI0) | \
-			BIT(SIC_INT_PCI1) | BIT(SIC_INT_PCI2) | \
-			BIT(SIC_INT_PCI3)
-#if 1
-#define IRQ_MMCI0A	IRQ_VICSOURCE22
-#define IRQ_AACI	IRQ_VICSOURCE24
-#define IRQ_ETH		IRQ_VICSOURCE25
-#define PIC_MASK	0xFFD00000
-#define PIC_VALID	PIC_VALID_ALL
-#else
-#define IRQ_MMCI0A	IRQ_SIC_MMCI0A
-#define IRQ_AACI	IRQ_SIC_AACI
-#define IRQ_ETH		IRQ_SIC_ETH
-#define PIC_MASK	0
-#define PIC_VALID	PIC_VALID_ALL | BIT(SIC_INT_MMCI0A) | \
-			BIT(SIC_INT_MMCI1A) | BIT(SIC_INT_AACI) | \
-			BIT(SIC_INT_ETH)
-#endif
-
-/* Lookup table for finding a DT node that represents the vic instance */
-static const struct of_device_id vic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-vic", },
-	{}
-};
-
-static const struct of_device_id sic_of_match[] __initconst = {
-	{ .compatible = "arm,versatile-sic", },
-	{}
-};
-
-void __init versatile_init_irq(void)
-{
-	struct device_node *np;
-
-	np = of_find_matching_node_by_address(NULL, vic_of_match,
-					      VERSATILE_VIC_BASE);
-	__vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np);
-
-	writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
-
-	np = of_find_matching_node_by_address(NULL, sic_of_match,
-					      VERSATILE_SIC_BASE);
-
-	fpga_irq_init(VA_SIC_BASE, "SIC", IRQ_SIC_START,
-		IRQ_VICSOURCE31, PIC_VALID, np);
-
-	/*
-	 * Interrupts on secondary controller from 0 to 8 are routed to
-	 * source 31 on PIC.
-	 * Interrupts from 21 to 31 are routed directly to the VIC on
-	 * the corresponding number on primary controller. This is controlled
-	 * by setting PIC_ENABLEx.
-	 */
-	writel(PIC_MASK, VA_SIC_BASE + SIC_INT_PIC_ENABLE);
-}
-
-static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
-	{
-		.virtual	=  IO_ADDRESS(VERSATILE_SYS_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SYS_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_VIC_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
-		.length		= SZ_4K * 9,
-		.type		= MT_DEVICE
-	},
-#ifdef CONFIG_MACH_VERSATILE_AB
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_IB2_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_IB2_BASE),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_DEBUG_LL
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_UART0_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-#endif
-#ifdef CONFIG_PCI
- 	{
-		.virtual	=  IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_BASE),
-		.length		= VERSATILE_PCI_BASE_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	=  (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE,
-		.pfn		= __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
-		.length		= VERSATILE_PCI_CFG_BASE_SIZE,
-		.type		= MT_DEVICE
-	},
-#endif
-};
-
-void __init versatile_map_io(void)
-{
-	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
-}
-
-
-#define VERSATILE_FLASHCTRL    (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_FLASH_OFFSET)
-
-static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(VERSATILE_FLASHCTRL);
-	if (on)
-		val |= VERSATILE_FLASHPROG_FLVPPEN;
-	else
-		val &= ~VERSATILE_FLASHPROG_FLVPPEN;
-	__raw_writel(val, VERSATILE_FLASHCTRL);
-}
-
-static struct physmap_flash_data versatile_flash_data = {
-	.width			= 4,
-	.set_vpp		= versatile_flash_set_vpp,
-};
-
-static struct resource versatile_flash_resource = {
-	.start			= VERSATILE_FLASH_BASE,
-	.end			= VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &versatile_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &versatile_flash_resource,
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= VERSATILE_ETH_BASE,
-		.end		= VERSATILE_ETH_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= IRQ_ETH,
-		.end		= IRQ_ETH,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource versatile_i2c_resource = {
-	.start			= VERSATILE_I2C_BASE,
-	.end			= VERSATILE_I2C_BASE + SZ_4K - 1,
-	.flags			= IORESOURCE_MEM,
-};
-
-static struct platform_device versatile_i2c_device = {
-	.name			= "versatile-i2c",
-	.id			= 0,
-	.num_resources		= 1,
-	.resource		= &versatile_i2c_resource,
-};
-
-static struct i2c_board_info versatile_i2c_board_info[] = {
-	{
-		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
-	},
-};
-
-static int __init versatile_i2c_init(void)
-{
-	return i2c_register_board_info(0, versatile_i2c_board_info,
-				       ARRAY_SIZE(versatile_i2c_board_info));
-}
-arch_initcall(versatile_i2c_init);
-
-#define VERSATILE_SYSMCI	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_MCI_OFFSET)
-
-unsigned int mmc_status(struct device *dev)
-{
-	struct amba_device *adev = container_of(dev, struct amba_device, dev);
-	u32 mask;
-
-	if (adev->res.start == VERSATILE_MMCI0_BASE)
-		mask = 1;
-	else
-		mask = 2;
-
-	return readl(VERSATILE_SYSMCI) & mask;
-}
-
-static struct mmci_platform_data mmc0_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-static struct resource char_lcd_resources[] = {
-	{
-		.start = VERSATILE_CHAR_LCD_BASE,
-		.end   = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1),
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device char_lcd_device = {
-	.name           =       "arm-charlcd",
-	.id             =       -1,
-	.num_resources  =       ARRAY_SIZE(char_lcd_resources),
-	.resource       =       char_lcd_resources,
-};
-
-static struct resource leds_resources[] = {
-	{
-		.start	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET,
-		.end	= VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device leds_device = {
-	.name		= "versatile-leds",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(leds_resources),
-	.resource	= leds_resources,
-};
-
-/*
- * Clock handling
- */
-static const struct icst_params versatile_oscvco_params = {
-	.ref		= 24000000,
-	.vco_max	= ICST307_VCO_MAX,
-	.vco_min	= ICST307_VCO_MIN,
-	.vd_min		= 4 + 8,
-	.vd_max		= 511 + 8,
-	.rd_min		= 1 + 2,
-	.rd_max		= 127 + 2,
-	.s2div		= icst307_s2div,
-	.idx2s		= icst307_idx2s,
-};
-
-static void versatile_oscvco_set(struct clk *clk, struct icst_vco vco)
-{
-	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-	u32 val;
-
-	val = readl(clk->vcoreg) & ~0x7ffff;
-	val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, sys_lock);
-	writel(val, clk->vcoreg);
-	writel(0, sys_lock);
-}
-
-static const struct clk_ops osc4_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= versatile_oscvco_set,
-};
-
-static struct clk osc4_clk = {
-	.ops	= &osc4_clk_ops,
-	.params	= &versatile_oscvco_params,
-};
-
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate	= 24000000,
-};
-
-static struct clk sp804_clk = {
-	.rate	= 1000000,
-};
-
-static struct clk dummy_apb_pclk;
-
-static struct clk_lookup lookups[] = {
-	{	/* AMBA bus clock */
-		.con_id		= "apb_pclk",
-		.clk		= &dummy_apb_pclk,
-	}, {	/* UART0 */
-		.dev_id		= "dev:f1",
-		.clk		= &ref24_clk,
-	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
-		.clk		= &ref24_clk,
-	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
-		.clk		= &ref24_clk,
-	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
-		.clk		= &ref24_clk,
-	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
-		.clk		= &ref24_clk,
-	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
-		.clk		= &ref24_clk,
-	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
-		.clk		= &ref24_clk,
-	}, {	/* MMC1 */
-		.dev_id		= "fpga:0b",
-		.clk		= &ref24_clk,
-	}, {	/* SSP */
-		.dev_id		= "dev:f4",
-		.clk		= &ref24_clk,
-	}, {	/* CLCD */
-		.dev_id		= "dev:20",
-		.clk		= &osc4_clk,
-	}, {	/* SP804 timers */
-		.dev_id		= "sp804",
-		.clk		= &sp804_clk,
-	},
-};
-
-/*
- * CLCD support.
- */
-#define SYS_CLCD_MODE_MASK	(3 << 0)
-#define SYS_CLCD_MODE_888	(0 << 0)
-#define SYS_CLCD_MODE_5551	(1 << 0)
-#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
-#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
-#define SYS_CLCD_NLCDIOON	(1 << 2)
-#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
-#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
-#define SYS_CLCD_ID_MASK	(0x1f << 8)
-#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
-#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
-#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
-#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
-#define SYS_CLCD_ID_VGA		(0x1f << 8)
-
-static bool is_sanyo_2_5_lcd;
-
-/*
- * Disable all display connectors on the interface module.
- */
-static void versatile_clcd_disable(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl &= ~0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Enable the relevant connector on the interface module.
- */
-static void versatile_clcd_enable(struct clcd_fb *fb)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	u32 val;
-
-	val = readl(sys_clcd);
-	val &= ~SYS_CLCD_MODE_MASK;
-
-	switch (var->green.length) {
-	case 5:
-		val |= SYS_CLCD_MODE_5551;
-		break;
-	case 6:
-		if (var->red.offset == 0)
-			val |= SYS_CLCD_MODE_565_RLSB;
-		else
-			val |= SYS_CLCD_MODE_565_BLSB;
-		break;
-	case 8:
-		val |= SYS_CLCD_MODE_888;
-		break;
-	}
-
-	/*
-	 * Set the MUX
-	 */
-	writel(val, sys_clcd);
-
-	/*
-	 * And now enable the PSUs
-	 */
-	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
-	writel(val, sys_clcd);
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-	/*
-	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
-	 */
-	if (machine_is_versatile_ab() && is_sanyo_2_5_lcd) {
-		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
-		unsigned long ctrl;
-
-		ctrl = readl(versatile_ib2_ctrl);
-		ctrl |= 0x01;
-		writel(ctrl, versatile_ib2_ctrl);
-	}
-#endif
-}
-
-/*
- * Detect which LCD panel is connected, and return the appropriate
- * clcd_panel structure.  Note: we do not have any information on
- * the required timings for the 8.4in panel, so we presently assume
- * VGA timings.
- */
-static int versatile_clcd_setup(struct clcd_fb *fb)
-{
-	void __iomem *sys_clcd = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_CLCD_OFFSET;
-	const char *panel_name;
-	u32 val;
-
-	is_sanyo_2_5_lcd = false;
-
-	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
-	if (val == SYS_CLCD_ID_SANYO_3_8)
-		panel_name = "Sanyo TM38QV67A02A";
-	else if (val == SYS_CLCD_ID_SANYO_2_5) {
-		panel_name = "Sanyo QVGA Portrait";
-		is_sanyo_2_5_lcd = true;
-	} else if (val == SYS_CLCD_ID_EPSON_2_2)
-		panel_name = "Epson L2F50113T00";
-	else if (val == SYS_CLCD_ID_VGA)
-		panel_name = "VGA";
-	else {
-		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
-			val);
-		panel_name = "VGA";
-	}
-
-	fb->panel = versatile_clcd_get_panel(panel_name);
-	if (!fb->panel)
-		return -EINVAL;
-
-	return versatile_clcd_setup_dma(fb, SZ_1M);
-}
-
-static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
-	clcdfb_decode(fb, regs);
-
-	/* Always clear BGR for RGB565: we do the routing externally */
-	if (fb->fb.var.green.length == 6)
-		regs->cntl &= ~CNTL_BGR;
-}
-
-static struct clcd_board clcd_plat_data = {
-	.name		= "Versatile",
-	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
-	.check		= clcdfb_check,
-	.decode		= versatile_clcd_decode,
-	.disable	= versatile_clcd_disable,
-	.enable		= versatile_clcd_enable,
-	.setup		= versatile_clcd_setup,
-	.mmap		= versatile_clcd_mmap_dma,
-	.remove		= versatile_clcd_remove_dma,
-};
-
-static struct pl061_platform_data gpio0_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= IRQ_GPIO0_START,
-};
-
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= IRQ_GPIO1_START,
-};
-
-static struct pl061_platform_data gpio2_plat_data = {
-	.gpio_base	= 16,
-	.irq_base	= IRQ_GPIO2_START,
-};
-
-static struct pl061_platform_data gpio3_plat_data = {
-	.gpio_base	= 24,
-	.irq_base	= IRQ_GPIO3_START,
-};
-
-static struct pl022_ssp_controller ssp0_plat_data = {
-	.bus_id = 0,
-	.enable_dma = 0,
-	.num_chipselect = 1,
-};
-
-#define AACI_IRQ	{ IRQ_AACI }
-#define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ	{ IRQ_SIC_KMI0 }
-#define KMI1_IRQ	{ IRQ_SIC_KMI1 }
-
-/*
- * These devices are connected directly to the multi-layer AHB switch
- */
-#define SMC_IRQ		{ }
-#define MPMC_IRQ	{ }
-#define CLCD_IRQ	{ IRQ_CLCDINT }
-#define DMAC_IRQ	{ IRQ_DMAINT }
-
-/*
- * These devices are connected via the core APB bridge
- */
-#define SCTL_IRQ	{ }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0 }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1 }
-#define GPIO2_IRQ	{ IRQ_GPIOINT2 }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3 }
-#define RTC_IRQ		{ IRQ_RTCINT }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-#define SCI_IRQ		{ IRQ_SCIINT }
-#define UART0_IRQ	{ IRQ_UARTINT0 }
-#define UART1_IRQ	{ IRQ_UARTINT1 }
-#define UART2_IRQ	{ IRQ_UARTINT2 }
-#define SSP_IRQ		{ IRQ_SSPINT }
-
-/* FPGA Primecells */
-APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
-APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-
-/* DevChip Primecells */
-AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
-AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
-AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
-APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
-APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
-APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
-
-static struct amba_device *amba_devs[] __initdata = {
-	&dmac_device,
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&smc_device,
-	&mpmc_device,
-	&clcd_device,
-	&sctl_device,
-	&wdog_device,
-	&gpio0_device,
-	&gpio1_device,
-	&gpio2_device,
-	&gpio3_device,
-	&rtc_device,
-	&sci0_device,
-	&ssp0_device,
-	&aaci_device,
-	&mmc0_device,
-	&kmi0_device,
-	&kmi1_device,
-};
-
-#ifdef CONFIG_OF
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL),
-	/* FIXME: this is buggy, the platform data is needed for this MMC instance too */
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", &ssp0_plat_data),
-
-#if 0
-	/*
-	 * These entries are unnecessary because no clocks referencing
-	 * them.  I've left them in for now as place holders in case
-	 * any of them need to be added back, but they should be
-	 * removed before actually committing this patch.  --gcl
-	 */
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL),
-
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL),
-	OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL),
-#endif
-	{}
-};
-#endif
-
-void versatile_restart(enum reboot_mode mode, const char *cmd)
-{
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-	u32 val;
-
-	val = __raw_readl(sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	val |= 0x105;
-
-	__raw_writel(0xa05f, sys + VERSATILE_SYS_LOCK_OFFSET);
-	__raw_writel(val, sys + VERSATILE_SYS_RESETCTL_OFFSET);
-	__raw_writel(0, sys + VERSATILE_SYS_LOCK_OFFSET);
-}
-
-/* Early initializations */
-void __init versatile_init_early(void)
-{
-	u32 val;
-	void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
-
-	osc4_clk.vcoreg	= sys + VERSATILE_SYS_OSCCLCD_OFFSET;
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
-
-	/*
-	 * set clock frequency:
-	 *	VERSATILE_REFCLK is 32KHz
-	 *	VERSATILE_TIMCLK is 1MHz
-	 */
-	val = readl(__io_address(VERSATILE_SCTL_BASE));
-	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
-	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
-	       __io_address(VERSATILE_SCTL_BASE));
-}
-
-void __init versatile_init(void)
-{
-	int i;
-
-	platform_device_register(&versatile_flash_device);
-	platform_device_register(&versatile_i2c_device);
-	platform_device_register(&smc91x_device);
-	platform_device_register(&char_lcd_device);
-	platform_device_register(&leds_device);
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE		 __io_address(VERSATILE_TIMER0_1_BASE)
-#define TIMER1_VA_BASE		(__io_address(VERSATILE_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE		 __io_address(VERSATILE_TIMER2_3_BASE)
-#define TIMER3_VA_BASE		(__io_address(VERSATILE_TIMER2_3_BASE) + 0x20)
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init versatile_timer_init(void)
-{
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	sp804_timer_disable(TIMER0_VA_BASE);
-	sp804_timer_disable(TIMER1_VA_BASE);
-	sp804_timer_disable(TIMER2_VA_BASE);
-	sp804_timer_disable(TIMER3_VA_BASE);
-
-	sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
-	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
-}
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
deleted file mode 100644
index f06d5768e428..000000000000
--- a/arch/arm/mach-versatile/core.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/core.h
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VERSATILE_H
-#define __ASM_ARCH_VERSATILE_H
-
-#include <linux/amba/bus.h>
-#include <linux/of_platform.h>
-#include <linux/reboot.h>
-
-extern void __init versatile_init(void);
-extern void __init versatile_init_early(void);
-extern void __init versatile_init_irq(void);
-extern void __init versatile_map_io(void);
-extern void versatile_timer_init(void);
-extern void versatile_restart(enum reboot_mode, const char *);
-extern unsigned int mmc_status(struct device *dev);
-#ifdef CONFIG_OF
-extern struct of_dev_auxdata versatile_auxdata_lookup[];
-#endif
-
-#define APB_DEVICE(name, busid, base, plat)	\
-static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#define AHB_DEVICE(name, busid, base, plat)	\
-static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/clkdev.h b/arch/arm/mach-versatile/include/mach/clkdev.h
deleted file mode 100644
index e58d0771b64e..000000000000
--- a/arch/arm/mach-versatile/include/mach/clkdev.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __ASM_MACH_CLKDEV_H
-#define __ASM_MACH_CLKDEV_H
-
-#include <plat/clock.h>
-
-struct clk {
-	unsigned long		rate;
-	const struct clk_ops	*ops;
-	const struct icst_params *params;
-	void __iomem		*vcoreg;
-};
-
-#define __clk_get(clk) ({ 1; })
-#define __clk_put(clk) do { } while (0)
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
deleted file mode 100644
index 3e5d425e2a92..000000000000
--- a/arch/arm/mach-versatile/include/mach/hardware.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/hardware.h
- *
- *  This file contains the hardware definitions of the Versatile boards.
- *
- *  Copyright (C) 2003 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-/*
- * PCI space virtual addresses
- */
-#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
-#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
-
-/* macro to get at MMIO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
-
-#define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
deleted file mode 100644
index 0fd771ca617b..000000000000
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/irqs.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/platform.h>
-
-/* 
- *  IRQ interrupts definitions are the same as the INT definitions
- *  held within platform.h
- */
-#define IRQ_VIC_START		32
-#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
-#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
-#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
-#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
-#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
-#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
-#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
-#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
-#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
-#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
-#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
-#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
-#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
-#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
-#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
-#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
-#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
-#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
-#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
-#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
-#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
-#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
-#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
-#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
-#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
-#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
-#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
-#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
-#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
-#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
-#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
-#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
-#define IRQ_VIC_END		(IRQ_VIC_START + 31)
-
-/* 
- *  FIQ interrupts definitions are the same as the INT definitions.
- */
-#define FIQ_WDOGINT		INT_WDOGINT
-#define FIQ_SOFTINT		INT_SOFTINT
-#define FIQ_COMMRx		INT_COMMRx
-#define FIQ_COMMTx		INT_COMMTx
-#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
-#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
-#define FIQ_GPIOINT0		INT_GPIOINT0
-#define FIQ_GPIOINT1		INT_GPIOINT1
-#define FIQ_GPIOINT2		INT_GPIOINT2
-#define FIQ_GPIOINT3		INT_GPIOINT3
-#define FIQ_RTCINT		INT_RTCINT
-#define FIQ_SSPINT		INT_SSPINT
-#define FIQ_UARTINT0		INT_UARTINT0
-#define FIQ_UARTINT1		INT_UARTINT1
-#define FIQ_UARTINT2		INT_UARTINT2
-#define FIQ_SCIINT		INT_SCIINT
-#define FIQ_CLCDINT		INT_CLCDINT
-#define FIQ_DMAINT		INT_DMAINT
-#define FIQ_PWRFAILINT 		INT_PWRFAILINT
-#define FIQ_MBXINT		INT_MBXINT
-#define FIQ_GNDINT		INT_GNDINT
-#define FIQ_VICSOURCE21		INT_VICSOURCE21
-#define FIQ_VICSOURCE22		INT_VICSOURCE22
-#define FIQ_VICSOURCE23		INT_VICSOURCE23
-#define FIQ_VICSOURCE24		INT_VICSOURCE24
-#define FIQ_VICSOURCE25		INT_VICSOURCE25
-#define FIQ_VICSOURCE26		INT_VICSOURCE26
-#define FIQ_VICSOURCE27		INT_VICSOURCE27
-#define FIQ_VICSOURCE28		INT_VICSOURCE28
-#define FIQ_VICSOURCE29		INT_VICSOURCE29
-#define FIQ_VICSOURCE30		INT_VICSOURCE30
-#define FIQ_VICSOURCE31		INT_VICSOURCE31
-
-
-/*
- * Secondary interrupt controller
- */
-#define IRQ_SIC_START		64
-#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
-#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
-#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
-#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
-#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
-#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
-#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
-#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
-#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
-#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
-#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
-#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
-#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
-#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
-#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
-#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
-#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
-#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
-#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END		95
-
-#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
-#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
-#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
-#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
-#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
-#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
-#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
-#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
-
-#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
deleted file mode 100644
index 6f938ccb0c54..000000000000
--- a/arch/arm/mach-versatile/include/mach/platform.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/platform.h
- *
- * Copyright (c) ARM Limited 2003.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __address_h
-#define __address_h                     1
-
-/*
- * Memory definitions
- */
-#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
-#define VERSATILE_BOOT_ROM_HI          0x30000000
-#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
-#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
-
-#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
-#define VERSATILE_SSRAM_SIZE           SZ_2M
-
-#define VERSATILE_FLASH_BASE           0x34000000
-#define VERSATILE_FLASH_SIZE           SZ_64M
-
-/* 
- *  SDRAM
- */
-#define VERSATILE_SDRAM_BASE           0x00000000
-
-/* 
- *  Logic expansion modules
- * 
- */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Registers
- * ------------------------------------------------------------------------
- * 
- */
-#define VERSATILE_SYS_ID_OFFSET               0x00
-#define VERSATILE_SYS_SW_OFFSET               0x04
-#define VERSATILE_SYS_LED_OFFSET              0x08
-#define VERSATILE_SYS_OSC0_OFFSET             0x0C
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x10
-#define VERSATILE_SYS_OSC2_OFFSET             0x14
-#define VERSATILE_SYS_OSC3_OFFSET             0x18
-#define VERSATILE_SYS_OSC4_OFFSET             0x1C
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-#define VERSATILE_SYS_OSC1_OFFSET             0x1C
-#endif
-
-#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
-
-#define VERSATILE_SYS_LOCK_OFFSET             0x20
-#define VERSATILE_SYS_100HZ_OFFSET            0x24
-#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
-#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
-#define VERSATILE_SYS_FLAGS_OFFSET            0x30
-#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
-#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
-#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
-#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
-#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
-#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
-#define VERSATILE_SYS_PCICTL_OFFSET           0x44
-#define VERSATILE_SYS_MCI_OFFSET              0x48
-#define VERSATILE_SYS_FLASH_OFFSET            0x4C
-#define VERSATILE_SYS_CLCD_OFFSET             0x50
-#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
-#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
-#define VERSATILE_SYS_24MHz_OFFSET            0x5C
-#define VERSATILE_SYS_MISC_OFFSET             0x60
-#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
-#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
-#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
-#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
-#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
-
-#define VERSATILE_SYS_BASE                    0x10000000
-#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
-#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
-#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
-#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
-#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
-
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
-#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
-#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
-#endif
-
-#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
-#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
-#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
-#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
-#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
-#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
-#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
-#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
-#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
-#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
-#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
-#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
-#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
-#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
-#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
-#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
-#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
-#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
-#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
-#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
-#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
-#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
-#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
-#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
-
-/* 
- * Values for VERSATILE_SYS_RESET_CTRL
- */
-#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
-#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
-#define VERSATILE_SYS_CTRL_RESET_POR          0x05
-#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
-
-#define VERSATILE_SYS_CTRL_LED         (1 << 0)
-
-
-/* ------------------------------------------------------------------------
- *  Versatile control registers
- * ------------------------------------------------------------------------
- */
-
-/* 
- * VERSATILE_IDFIELD
- *
- * 31:24 = manufacturer (0x41 = ARM)
- * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
- * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
- * 11:4  = build value
- * 3:0   = revision number (0x1 = rev B (AHB))
- */
-
-/*
- * VERSATILE_SYS_LOCK
- *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
- *     SYS_CLD, SYS_BOOTCS
- */
-#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
-#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
-
-/*
- * VERSATILE_SYS_FLASH
- */
-#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
-
-/*
- * VERSATILE_INTREG
- *     - used to acknowledge and control MMCI and UART interrupts 
- */
-#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
-#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
-#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
-                                                /* write 1 to acknowledge and clear               */
-#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
-#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
-
-/*
- * VERSATILE peripheral addresses
- */
-#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
-#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
-#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
-#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
-#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
-#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
-#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
-#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
-#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
-#define VERSATILE_SCI1_BASE            0x1000A000
-#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
-	/* 0x1000C000 - 0x1000CFFF = reserved */
-#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
-#define VERSATILE_USB_BASE             0x10020000	/* USB */
-	/* 0x10030000 - 0x100FFFFF = reserved */
-#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
-#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
-#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
-#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
-#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
-#define VERSATILE_PERIPH_BASE          0x10150000	/* off-chip peripherals alias from */
-                                                /* 0x10000000 - 0x100FFFFF */
-#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
-#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
-#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
-#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
-#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
-#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
-#define VERSATILE_GPIO1_BASE           0x101E5000	/* GPIO port 1 */
-#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
-#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
-#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
-	/* 0x101E9000 - reserved */
-#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
-#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
-#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
-#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
-#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
-
-#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
-#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
-#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
-
-/* PCI space */
-#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
-#define VERSATILE_PCI_CFG_BASE	       0x42000000
-#define VERSATILE_PCI_IO_BASE          0x43000000
-#define VERSATILE_PCI_MEM_BASE0        0x44000000
-#define VERSATILE_PCI_MEM_BASE1        0x50000000
-#define VERSATILE_PCI_MEM_BASE2        0x60000000
-/* Sizes of above maps */
-#define VERSATILE_PCI_BASE_SIZE	       0x01000000
-#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
-#define VERSATILE_PCI_IO_BASE_SIZE     0x01000000
-#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
-#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
-#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
-
-#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
-#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
-
-/*
- * Disk on Chip
- */
-#define VERSATILE_DOC_BASE             0x2C000000
-#define VERSATILE_DOC_SIZE             (16 << 20)
-#define VERSATILE_DOC_PAGE_SIZE        512
-#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
-
-#define ERASE_UNIT_PAGES    32
-#define START_PAGE          0x80
-
-/* 
- *  LED settings, bits [7:0]
- */
-#define VERSATILE_SYS_LED0             (1 << 0)
-#define VERSATILE_SYS_LED1             (1 << 1)
-#define VERSATILE_SYS_LED2             (1 << 2)
-#define VERSATILE_SYS_LED3             (1 << 3)
-#define VERSATILE_SYS_LED4             (1 << 4)
-#define VERSATILE_SYS_LED5             (1 << 5)
-#define VERSATILE_SYS_LED6             (1 << 6)
-#define VERSATILE_SYS_LED7             (1 << 7)
-
-#define ALL_LEDS                  0xFF
-
-#define LED_BANK                  VERSATILE_SYS_LED
-
-/* 
- * Control registers
- */
-#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
-#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
-#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
-#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
-
-
-/* ------------------------------------------------------------------------
- *  Versatile Interrupt Controller - control registers
- * ------------------------------------------------------------------------
- * 
- *  Offsets from interrupt controller base 
- * 
- *  System Controller interrupt controller base is
- * 
- * 	VERSATILE_IC_BASE
- * 
- *  Core Module interrupt controller base is
- * 
- * 	VERSATILE_SYS_IC 
- * 
- */
-/* VIC definitions in include/asm-arm/hardware/vic.h */
-
-#define SIC_IRQ_STATUS                  0
-#define SIC_IRQ_RAW_STATUS              0x04
-#define SIC_IRQ_ENABLE                  0x08
-#define SIC_IRQ_ENABLE_SET              0x08
-#define SIC_IRQ_ENABLE_CLEAR            0x0C
-#define SIC_INT_SOFT_SET                0x10
-#define SIC_INT_SOFT_CLEAR              0x14
-#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
-#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
-#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (primary)
- * ------------------------------------------------------------------------
- */
-
-#define INT_WDOGINT                     0	/* Watchdog timer */
-#define INT_SOFTINT                     1	/* Software interrupt */
-#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
-#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
-#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
-#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
-#define INT_GPIOINT0                    6	/* GPIO 0 */
-#define INT_GPIOINT1                    7	/* GPIO 1 */
-#define INT_GPIOINT2                    8	/* GPIO 2 */
-#define INT_GPIOINT3                    9	/* GPIO 3 */
-#define INT_RTCINT                      10	/* Real Time Clock */
-#define INT_SSPINT                      11	/* Synchronous Serial Port */
-#define INT_UARTINT0                    12	/* UART 0 on development chip */
-#define INT_UARTINT1                    13	/* UART 1 on development chip */
-#define INT_UARTINT2                    14	/* UART 2 on development chip */
-#define INT_SCIINT                      15	/* Smart Card Interface */
-#define INT_CLCDINT                     16	/* CLCD controller */
-#define INT_DMAINT                      17	/* DMA controller */
-#define INT_PWRFAILINT                  18	/* Power failure */
-#define INT_MBXINT                      19	/* Graphics processor */
-#define INT_GNDINT                      20	/* Reserved */
-	/* External interrupt signals from logic tiles or secondary controller */
-#define INT_VICSOURCE21                 21	/* Disk on Chip */
-#define INT_VICSOURCE22                 22	/* MCI0A */
-#define INT_VICSOURCE23                 23	/* MCI1A */
-#define INT_VICSOURCE24                 24	/* AACI */
-#define INT_VICSOURCE25                 25	/* Ethernet */
-#define INT_VICSOURCE26                 26	/* USB */
-#define INT_VICSOURCE27                 27	/* PCI 0 */
-#define INT_VICSOURCE28                 28	/* PCI 1 */
-#define INT_VICSOURCE29                 29	/* PCI 2 */
-#define INT_VICSOURCE30                 30	/* PCI 3 */
-#define INT_VICSOURCE31                 31	/* SIC source */
-
-#define VERSATILE_SC_VALID_INT               0x003FFFFF
-
-#define MAXIRQNUM                       31
-#define MAXFIQNUM                       31
-#define MAXSWINUM                       31
-
-/* ------------------------------------------------------------------------
- *  Interrupts - bit assignment (secondary)
- * ------------------------------------------------------------------------
- */
-#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
-#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
-#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
-#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
-#define SIC_INT_SCI3                    5	/* Smart Card interface */
-#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
-#define SIC_INT_CLCD                    7	/* Character LCD */
-#define SIC_INT_TOUCH                   8	/* Touchscreen */
-#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
-	/* 10:20 - reserved */
-#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
-#define SIC_INT_MMCI0A                  22	/* MMC 0A */
-#define SIC_INT_MMCI1A                  23	/* MMC 1A */
-#define SIC_INT_AACI                    24	/* Audio Codec */
-#define SIC_INT_ETH                     25	/* Ethernet controller */
-#define SIC_INT_USB                     26	/* USB controller */
-#define SIC_INT_PCI0                    27
-#define SIC_INT_PCI1                    28
-#define SIC_INT_PCI2                    29
-#define SIC_INT_PCI3                    30
-
-
-/*
- * System controller bit assignment
- */
-#define VERSATILE_REFCLK	0
-#define VERSATILE_TIMCLK	1
-
-#define VERSATILE_TIMER1_EnSel	15
-#define VERSATILE_TIMER2_EnSel	17
-#define VERSATILE_TIMER3_EnSel	19
-#define VERSATILE_TIMER4_EnSel	21
-
-
-#define VERSATILE_CSR_BASE             0x10000000
-#define VERSATILE_CSR_SIZE             0x10000000
-
-#ifdef CONFIG_MACH_VERSATILE_AB
-/*
- * IB2 Versatile/AB expansion board definitions
- */
-#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
-#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
-
-/* VICINTSOURCE27 */
-#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
-#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
-#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
-
-#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
-#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
-#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
-#endif
-
-#endif
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
deleted file mode 100644
index 986e3d303f3c..000000000000
--- a/arch/arm/mach-versatile/include/mach/uncompress.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/uncompress.h
- *
- *  Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
-#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
-#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
-#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
-	while (AMBA_UART_FR & (1 << 5))
-		barrier();
-
-	AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
-	while (AMBA_UART_FR & (1 << 3))
-		barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
deleted file mode 100644
index c97be4ea76d2..000000000000
--- a/arch/arm/mach-versatile/pci.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/pci.c
- *
- * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
- * You can redistribute and/or modify this software under the terms of version 2
- * of the GNU General Public License as published by the Free Software Foundation.
- * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
- * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
- *
- * ARM Versatile PCI driver.
- *
- * 14/04/2005 Initial version, colin.king@philips.com
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-
-/*
- * these spaces are mapped using the following base registers:
- *
- * Usage Local Bus Memory         Base/Map registers used
- *
- * Mem   50000000 - 5FFFFFFF      LB_BASE0/LB_MAP0,  non prefetch
- * Mem   60000000 - 6FFFFFFF      LB_BASE1/LB_MAP1,  prefetch
- * IO    44000000 - 4FFFFFFF      LB_BASE2/LB_MAP2,  IO
- * Cfg   42000000 - 42FFFFFF	  PCI config
- *
- */
-#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n))
-#define SYS_PCICTL		__IO_ADDRESS(VERSATILE_SYS_PCICTL)
-#define PCI_IMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0)
-#define PCI_IMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4)
-#define PCI_IMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8)
-#define PCI_SMAP0		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14)
-#define PCI_SMAP1		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18)
-#define PCI_SMAP2		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x1c)
-#define PCI_SELFID		__IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc)
-
-#define DEVICE_ID_OFFSET		0x00
-#define CSR_OFFSET			0x04
-#define CLASS_ID_OFFSET			0x08
-
-#define VP_PCI_DEVICE_ID		0x030010ee
-#define VP_PCI_CLASS_ID			0x0b400000
-
-static unsigned long pci_slot_ignore = 0;
-
-static int __init versatile_pci_slot_ignore(char *str)
-{
-	int retval;
-	int slot;
-
-	while ((retval = get_option(&str,&slot))) {
-		if ((slot < 0) || (slot > 31)) {
-			printk("Illegal slot value: %d\n",slot);
-		} else {
-			pci_slot_ignore |= (1 << slot);
-		}
-	}
-	return 1;
-}
-
-__setup("pci_slot_ignore=", versatile_pci_slot_ignore);
-
-
-static void __iomem *__pci_addr(struct pci_bus *bus,
-				unsigned int devfn, int offset)
-{
-	unsigned int busnr = bus->number;
-
-	/*
-	 * Trap out illegal values
-	 */
-	if (offset > 255)
-		BUG();
-	if (busnr > 255)
-		BUG();
-	if (devfn > 255)
-		BUG();
-
-	return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) |
-		(PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset);
-}
-
-static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-				 int size, u32 *val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where & ~3);
-	u32 v;
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		/* Ignore this slot */
-		switch (size) {
-		case 1:
-			v = 0xff;
-			break;
-		case 2:
-			v = 0xffff;
-			break;
-		default:
-			v = 0xffffffff;
-		}
-	} else {
-		switch (size) {
-		case 1:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
-			if (where & 1) v >>= 8;
- 			v &= 0xff;
-			break;
-
-		case 2:
-			v = __raw_readl(addr);
-			if (where & 2) v >>= 16;
- 			v &= 0xffff;
-			break;
-
-		default:
-			v = __raw_readl(addr);
-			break;
-		}
-	}
-
-	*val = v;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				  int size, u32 val)
-{
-	void __iomem *addr = __pci_addr(bus, devfn, where);
-	int slot = PCI_SLOT(devfn);
-
-	if (pci_slot_ignore & (1 << slot)) {
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	switch (size) {
-	case 1:
-		__raw_writeb((u8)val, addr);
-		break;
-
-	case 2:
-		__raw_writew((u16)val, addr);
-		break;
-
-	case 4:
-		__raw_writel(val, addr);
-		break;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_versatile_ops = {
-	.read	= versatile_read_config,
-	.write	= versatile_write_config,
-};
-
-static struct resource unused_mem = {
-	.name	= "PCI unused",
-	.start	= VERSATILE_PCI_MEM_BASE0,
-	.end	= VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource non_mem = {
-	.name	= "PCI non-prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE1,
-	.end	= VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct resource pre_mem = {
-	.name	= "PCI prefetchable",
-	.start	= VERSATILE_PCI_MEM_BASE2,
-	.end	= VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1,
-	.flags	= IORESOURCE_MEM | IORESOURCE_PREFETCH,
-};
-
-static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	ret = request_resource(&iomem_resource, &unused_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate unused "
-		       "memory region (%d)\n", ret);
-		goto out;
-	}
-	ret = request_resource(&iomem_resource, &non_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_unused_mem;
-	}
-	ret = request_resource(&iomem_resource, &pre_mem);
-	if (ret) {
-		printk(KERN_ERR "PCI: unable to allocate prefetchable "
-		       "memory region (%d)\n", ret);
-		goto release_non_mem;
-	}
-
-	/*
-	 * the mem resource for this bus
-	 * the prefetch mem resource for this bus
-	 */
-	pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
-
-	goto out;
-
- release_non_mem:
-	release_resource(&non_mem);
- release_unused_mem:
-	release_resource(&unused_mem);
- out:
-	return ret;
-}
-
-int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-        int i;
-        int myslot = -1;
-	unsigned long val;
-	void __iomem *local_pci_cfg_base;
-
-	val = __raw_readl(SYS_PCICTL);
-	if (!(val & 1)) {
-		printk("Not plugged into PCI backplane!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	ret = pci_ioremap_io(0, VERSATILE_PCI_IO_BASE);
-	if (ret)
-		goto out;
-
-	if (nr == 0) {
-		ret = pci_versatile_setup_resources(sys);
-		if (ret < 0) {
-			printk("pci_versatile_setup: resources... oops?\n");
-			goto out;
-		}
-	} else {
-		printk("pci_versatile_setup: resources... nr == 0??\n");
-		goto out;
-	}
-
-	/*
-	 *  We need to discover the PCI core first to configure itself
-	 *  before the main PCI probing is performed
-	 */
-	for (i=0; i<32; i++)
-		if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) &&
-		    (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) {
-			myslot = i;
-			break;
-		}
-
-	if (myslot == -1) {
-		printk("Cannot find PCI core!\n");
-		ret = -EIO;
-		goto out;
-	}
-
-	printk("PCI core found (slot %d)\n",myslot);
-
-	__raw_writel(myslot, PCI_SELFID);
-	local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11);
-
-	val = __raw_readl(local_pci_cfg_base + CSR_OFFSET);
-	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
-	__raw_writel(val, local_pci_cfg_base + CSR_OFFSET);
-
-	/*
-	 * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM
-	 */
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1);
-	__raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2);
-
-	/*
-	 * For many years the kernel and QEMU were symbiotically buggy
-	 * in that they both assumed the same broken IRQ mapping.
-	 * QEMU therefore attempts to auto-detect old broken kernels
-	 * so that they still work on newer QEMU as they did on old
-	 * QEMU. Since we now use the correct (ie matching-hardware)
-	 * IRQ mapping we write a definitely different value to a
-	 * PCI_INTERRUPT_LINE register to tell QEMU that we expect
-	 * real hardware behaviour and it need not be backwards
-	 * compatible for us. This write is harmless on real hardware.
-	 */
-	__raw_writel(0, VERSATILE_PCI_VIRT_BASE+PCI_INTERRUPT_LINE);
-
-	/*
-	 * Do not to map Versatile FPGA PCI device into memory space
-	 */
-	pci_slot_ignore |= (1 << myslot);
-	ret = 1;
-
- out:
-	return ret;
-}
-
-
-void __init pci_versatile_preinit(void)
-{
-	pcibios_min_mem = 0x50000000;
-
-	__raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0);
-	__raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1);
-	__raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2);
-
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1);
-	__raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2);
-
-	__raw_writel(1, SYS_PCICTL);
-}
-
-/*
- * map the specified device/slot/pin to an IRQ.   Different backplanes may need to modify this.
- */
-static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq;
-
-	/*
-	 * Slot	INTA	INTB	INTC	INTD
-	 * 31	PCI1	PCI2	PCI3	PCI0
-	 * 30	PCI0	PCI1	PCI2	PCI3
-	 * 29	PCI3	PCI0	PCI1	PCI2
-	 */
-	irq = IRQ_SIC_PCI0 + ((slot + 2 + pin - 1) & 3);
-
-	return irq;
-}
-
-static struct hw_pci versatile_pci __initdata = {
-	.map_irq		= versatile_map_irq,
-	.nr_controllers		= 1,
-	.ops			= &pci_versatile_ops,
-	.setup			= pci_versatile_setup,
-	.preinit		= pci_versatile_preinit,
-};
-
-static int __init versatile_pci_init(void)
-{
-	pci_common_init(&versatile_pci);
-	return 0;
-}
-
-subsys_initcall(versatile_pci_init);
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
deleted file mode 100644
index 1caef1093793..000000000000
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_ab.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.init_time	= versatile_timer_init,
-	.init_machine	= versatile_init,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 7de3e92a13b0..dff1c0595b67 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -22,15 +22,375 @@
  */
 
 #include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/platform_data/video-clcd-versatile.h>
+#include <linux/amba/mmci.h>
+#include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 
-#include "core.h"
+/* macro to get at MMIO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define __io_address(n)		((void __iomem __force *)IO_ADDRESS(n))
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_FLASH_BASE           0x34000000
+#define VERSATILE_FLASH_SIZE           SZ_64M
+
+/*
+ * ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ */
+#define VERSATILE_SYS_PCICTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_FLASH_OFFSET            0x4C
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_MMCI1_BASE           0x1000B000	/* MMC Interface */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+static void __iomem *versatile_sys_base;
+static void __iomem *versatile_ib2_ctrl;
+
+static void versatile_flash_set_vpp(struct platform_device *pdev, int on)
+{
+	u32 val;
+
+	val = readl(versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET);
+	if (on)
+		val |= VERSATILE_FLASHPROG_FLVPPEN;
+	else
+		val &= ~VERSATILE_FLASHPROG_FLVPPEN;
+	writel(val, versatile_sys_base + VERSATILE_SYS_FLASH_OFFSET);
+}
+
+static struct physmap_flash_data versatile_flash_data = {
+	.width			= 4,
+	.set_vpp		= versatile_flash_set_vpp,
+};
+
+static struct resource versatile_flash_resource = {
+	.start			= VERSATILE_FLASH_BASE,
+	.end			= VERSATILE_FLASH_BASE + VERSATILE_FLASH_SIZE - 1,
+	.flags			= IORESOURCE_MEM,
+};
+
+struct platform_device versatile_flash_device = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &versatile_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &versatile_flash_resource,
+};
+
+unsigned int mmc_status(struct device *dev)
+{
+	struct amba_device *adev = container_of(dev, struct amba_device, dev);
+	u32 mask;
+
+	if (adev->res.start == VERSATILE_MMCI0_BASE)
+		mask = 1;
+	else
+		mask = 2;
+
+	return readl(versatile_sys_base + VERSATILE_SYS_MCI_OFFSET) & mask;
+}
+
+static struct mmci_platform_data mmc0_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+static struct mmci_platform_data mmc1_plat_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
+};
+
+/*
+ * CLCD support.
+ */
+#define SYS_CLCD_MODE_MASK	(3 << 0)
+#define SYS_CLCD_MODE_888	(0 << 0)
+#define SYS_CLCD_MODE_5551	(1 << 0)
+#define SYS_CLCD_MODE_565_RLSB	(2 << 0)
+#define SYS_CLCD_MODE_565_BLSB	(3 << 0)
+#define SYS_CLCD_NLCDIOON	(1 << 2)
+#define SYS_CLCD_VDDPOSSWITCH	(1 << 3)
+#define SYS_CLCD_PWR3V5SWITCH	(1 << 4)
+#define SYS_CLCD_ID_MASK	(0x1f << 8)
+#define SYS_CLCD_ID_SANYO_3_8	(0x00 << 8)
+#define SYS_CLCD_ID_UNKNOWN_8_4	(0x01 << 8)
+#define SYS_CLCD_ID_EPSON_2_2	(0x02 << 8)
+#define SYS_CLCD_ID_SANYO_2_5	(0x07 << 8)
+#define SYS_CLCD_ID_VGA		(0x1f << 8)
+
+static bool is_sanyo_2_5_lcd;
+
+/*
+ * Disable all display connectors on the interface module.
+ */
+static void versatile_clcd_disable(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
+	 */
+	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl &= ~0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+}
+
+/*
+ * Enable the relevant connector on the interface module.
+ */
+static void versatile_clcd_enable(struct clcd_fb *fb)
+{
+	struct fb_var_screeninfo *var = &fb->fb.var;
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	u32 val;
+
+	val = readl(sys_clcd);
+	val &= ~SYS_CLCD_MODE_MASK;
+
+	switch (var->green.length) {
+	case 5:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	case 6:
+		if (var->red.offset == 0)
+			val |= SYS_CLCD_MODE_565_RLSB;
+		else
+			val |= SYS_CLCD_MODE_565_BLSB;
+		break;
+	case 8:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	}
+
+	/*
+	 * Set the MUX
+	 */
+	writel(val, sys_clcd);
+
+	/*
+	 * And now enable the PSUs
+	 */
+	val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
+	writel(val, sys_clcd);
+
+	/*
+	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
+	 */
+	if (of_machine_is_compatible("arm,versatile-ab") && is_sanyo_2_5_lcd) {
+		unsigned long ctrl;
+
+		ctrl = readl(versatile_ib2_ctrl);
+		ctrl |= 0x01;
+		writel(ctrl, versatile_ib2_ctrl);
+	}
+}
+
+/*
+ * Detect which LCD panel is connected, and return the appropriate
+ * clcd_panel structure.  Note: we do not have any information on
+ * the required timings for the 8.4in panel, so we presently assume
+ * VGA timings.
+ */
+static int versatile_clcd_setup(struct clcd_fb *fb)
+{
+	void __iomem *sys_clcd = versatile_sys_base + VERSATILE_SYS_CLCD_OFFSET;
+	const char *panel_name;
+	u32 val;
+
+	is_sanyo_2_5_lcd = false;
+
+	val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
+	if (val == SYS_CLCD_ID_SANYO_3_8)
+		panel_name = "Sanyo TM38QV67A02A";
+	else if (val == SYS_CLCD_ID_SANYO_2_5) {
+		panel_name = "Sanyo QVGA Portrait";
+		is_sanyo_2_5_lcd = true;
+	} else if (val == SYS_CLCD_ID_EPSON_2_2)
+		panel_name = "Epson L2F50113T00";
+	else if (val == SYS_CLCD_ID_VGA)
+		panel_name = "VGA";
+	else {
+		printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
+			val);
+		panel_name = "VGA";
+	}
+
+	fb->panel = versatile_clcd_get_panel(panel_name);
+	if (!fb->panel)
+		return -EINVAL;
+
+	return versatile_clcd_setup_dma(fb, SZ_1M);
+}
+
+static void versatile_clcd_decode(struct clcd_fb *fb, struct clcd_regs *regs)
+{
+	clcdfb_decode(fb, regs);
+
+	/* Always clear BGR for RGB565: we do the routing externally */
+	if (fb->fb.var.green.length == 6)
+		regs->cntl &= ~CNTL_BGR;
+}
+
+static struct clcd_board clcd_plat_data = {
+	.name		= "Versatile",
+	.caps		= CLCD_CAP_5551 | CLCD_CAP_565 | CLCD_CAP_888,
+	.check		= clcdfb_check,
+	.decode		= versatile_clcd_decode,
+	.disable	= versatile_clcd_disable,
+	.enable		= versatile_clcd_enable,
+	.setup		= versatile_clcd_setup,
+	.mmap		= versatile_clcd_mmap_dma,
+	.remove		= versatile_clcd_remove_dma,
+};
+
+/*
+ * Lookup table for attaching a specific name and platform_data pointer to
+ * devices as they get created by of_platform_populate().  Ideally this table
+ * would not exist, but the current clock implementation depends on some devices
+ * having a specific name.
+ */
+struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", &mmc0_plat_data),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", &mmc1_plat_data),
+	OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data),
+	{}
+};
+
+static struct map_desc versatile_io_desc[] __initdata __maybe_unused = {
+	{
+		.virtual	=  IO_ADDRESS(VERSATILE_SCTL_BASE),
+		.pfn		= __phys_to_pfn(VERSATILE_SCTL_BASE),
+		.length		= SZ_4K * 9,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init versatile_map_io(void)
+{
+	debug_ll_io_init();
+	iotable_init(versatile_io_desc, ARRAY_SIZE(versatile_io_desc));
+}
+
+static void __init versatile_init_early(void)
+{
+	u32 val;
+
+	/*
+	 * set clock frequency:
+	 *	VERSATILE_REFCLK is 32KHz
+	 *	VERSATILE_TIMCLK is 1MHz
+	 */
+	val = readl(__io_address(VERSATILE_SCTL_BASE));
+	writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+	       (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+	       __io_address(VERSATILE_SCTL_BASE));
+}
+
+static void __init versatile_dt_pci_init(void)
+{
+	u32 val;
+	struct device_node *np;
+	struct property *newprop;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,versatile-pci");
+	if (!np)
+		return;
+
+	/* Check if PCI backplane is detected */
+	val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
+	if (val & 1) {
+		/*
+		 * Enable PCI accesses. Note that the documentaton is
+		 * inconsistent whether or not this is needed, but the old
+		 * driver had it so we will keep it.
+		 */
+		writel(1, versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET);
+		return;
+	}
+
+	newprop = kzalloc(sizeof(*newprop), GFP_KERNEL);
+	if (!newprop)
+		return;
+
+	newprop->name = kstrdup("status", GFP_KERNEL);
+	newprop->value = kstrdup("disabled", GFP_KERNEL);
+	newprop->length = sizeof("disabled");
+	of_update_property(np, newprop);
+
+	pr_info("Not plugged into PCI backplane!\n");
+}
 
 static void __init versatile_dt_init(void)
 {
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,core-module-versatile");
+	if (np)
+		versatile_sys_base = of_iomap(np, 0);
+	WARN_ON(!versatile_sys_base);
+
+	versatile_ib2_ctrl = ioremap(VERSATILE_IB2_CTL_BASE, SZ_4K);
+
+	versatile_dt_pci_init();
+
+	platform_device_register(&versatile_flash_device);
 	of_platform_populate(NULL, of_default_bus_match_table,
 			     versatile_auxdata_lookup, NULL);
 }
@@ -46,5 +406,4 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
 	.init_early	= versatile_init_early,
 	.init_machine	= versatile_dt_init,
 	.dt_compat	= versatile_dt_match,
-	.restart	= versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
deleted file mode 100644
index 9a53d0bd9144..000000000000
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  linux/arch/arm/mach-versatile/versatile_pb.c
- *
- *  Copyright (C) 2004 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl061.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-
-#include "core.h"
-
-#if 1
-#define IRQ_MMCI1A	IRQ_VICSOURCE23
-#else
-#define IRQ_MMCI1A	IRQ_SIC_MMCI1A
-#endif
-
-static struct mmci_platform_data mmc1_plat_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.status		= mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
-};
-
-#define UART3_IRQ	{ IRQ_SIC_UART3 }
-#define SCI1_IRQ	{ IRQ_SIC_SCI3 }
-#define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
-
-/*
- * These devices are connected via the DMA APB bridge
- */
-
-/* FPGA Primecells */
-APB_DEVICE(uart3, "fpga:09", UART3,    NULL);
-APB_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
-APB_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
-
-
-static struct amba_device *amba_devs[] __initdata = {
-	&uart3_device,
-	&sci1_device,
-	&mmc1_device,
-};
-
-static void __init versatile_pb_init(void)
-{
-	int i;
-
-	versatile_init();
-
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		struct amba_device *d = amba_devs[i];
-		amba_device_register(d, &iomem_resource);
-	}
-}
-
-MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
-	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.atag_offset	= 0x100,
-	.map_io		= versatile_map_io,
-	.init_early	= versatile_init_early,
-	.init_irq	= versatile_init_irq,
-	.init_time	= versatile_timer_init,
-	.init_machine	= versatile_pb_init,
-	.restart	= versatile_restart,
-MACHINE_END
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 10f9389572da..398a297b7e09 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_VEXPRESS
-	bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
+	bool "ARM Ltd. Versatile Express family"
+	depends on ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index 2a11d3ac8c68..a162ab46ee02 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,5 +1,5 @@
 bool vexpress_smp_init_ops(void);
 
-extern struct smp_operations	vexpress_smp_dt_ops;
+extern const struct smp_operations vexpress_smp_dt_ops;
 
 extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
index f0ce6b8f5e71..f2fafc10a91d 100644
--- a/arch/arm/mach-vexpress/hotplug.c
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -85,7 +85,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
  *
  * Called with IRQs disabled
  */
-void __ref vexpress_cpu_die(unsigned int cpu)
+void vexpress_cpu_die(unsigned int cpu)
 {
 	int spurious = 0;
 
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 83188cf1875d..8b8d0724f6c6 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -64,7 +64,7 @@ static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus)
 	vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
 }
 
-struct smp_operations __initdata vexpress_smp_dt_ops = {
+const struct smp_operations vexpress_smp_dt_ops __initconst = {
 	.smp_prepare_cpus	= vexpress_smp_dt_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
 	.smp_boot_secondary	= versatile_boot_secondary,
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 213230ee57d1..ca763251ffe0 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -33,8 +33,8 @@
 #include <mach/hardware.h>
 #include <mach/regs-serial.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-#include <mach/regs-timer.h>
+#include "regs-ebi.h"
+#include "regs-timer.h"
 
 #include "cpu.h"
 #include "clock.h"
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index ba05aec7ea4b..55d1a00dbd28 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -20,7 +20,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <mach/hardware.h>
 
@@ -30,7 +30,6 @@
 #define GPIO_IN			(0x0C)
 #define GROUPINERV		(0x10)
 #define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
 
 #define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
@@ -53,7 +52,7 @@ struct nuc900_gpio_chip {
 
 static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
 	unsigned int regval;
 
@@ -65,7 +64,7 @@ static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 
 static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
 	unsigned int regval;
 	unsigned long flags;
@@ -86,7 +85,7 @@ static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
@@ -104,7 +103,7 @@ static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 
 static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	struct nuc900_gpio_chip *nuc900_gpio = gpiochip_get_data(chip);
 	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
 	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
@@ -149,6 +148,6 @@ void __init nuc900_init_gpio(int nr_group)
 		gpio_chip = &nuc900_gpio[i];
 		spin_lock_init(&gpio_chip->gpio_lock);
 		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
-		gpiochip_add(&gpio_chip->chip);
+		gpiochip_add_data(&gpio_chip->chip, gpio_chip);
 	}
 }
diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h
index 4b7c324ff664..3855ecebda6e 100644
--- a/arch/arm/mach-w90x900/include/mach/uncompress.h
+++ b/arch/arm/mach-w90x900/include/mach/uncompress.h
@@ -27,7 +27,7 @@
 #define TX_DONE	(UART_LSR_TEMT | UART_LSR_THRE)
 static volatile u32 * const uart_base = (u32 *)UART0_PA;
 
-static void putc(int ch)
+static inline void putc(int ch)
 {
 	/* Check THRE and TEMT bits before we transmit the character.
 	 */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/regs-ebi.h
index b68455e7f88b..b68455e7f88b 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-ebi.h
+++ b/arch/arm/mach-w90x900/regs-ebi.h
diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/regs-gcr.h
index 6087abd93ef5..6087abd93ef5 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-gcr.h
+++ b/arch/arm/mach-w90x900/regs-gcr.h
diff --git a/arch/arm/mach-w90x900/include/mach/regs-timer.h b/arch/arm/mach-w90x900/regs-timer.h
index 8f390620c0e4..8f390620c0e4 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-timer.h
+++ b/arch/arm/mach-w90x900/regs-timer.h
diff --git a/arch/arm/mach-w90x900/include/mach/regs-usb.h b/arch/arm/mach-w90x900/regs-usb.h
index ab74b0c2480b..ab74b0c2480b 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-usb.h
+++ b/arch/arm/mach-w90x900/regs-usb.h
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index cd1966ec9143..cda085245e34 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -31,7 +31,7 @@
 #include <asm/mach/time.h>
 
 #include <mach/map.h>
-#include <mach/regs-timer.h>
+#include "regs-timer.h"
 
 #include "nuc9xx.h"
 
diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig
index 7fdc5bf24f9b..209c97944de2 100644
--- a/arch/arm/mach-zx/Kconfig
+++ b/arch/arm/mach-zx/Kconfig
@@ -1,5 +1,6 @@
 menuconfig ARCH_ZX
-	bool "ZTE ZX family" if ARCH_MULTI_V7
+	bool "ZTE ZX family"
+	depends on ARCH_MULTI_V7
 	help
 	  Support for ZTE ZX-based family of processors. TV
 	  set-top-box processor is supported. More will be
@@ -13,7 +14,7 @@ config SOC_ZX296702
 	select ARM_GLOBAL_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for ZTE ZX296702 SoC which is a dual core CortexA9MP
 endif
diff --git a/arch/arm/mach-zx/platsmp.c b/arch/arm/mach-zx/platsmp.c
index a3693982d65d..0297f92084e0 100644
--- a/arch/arm/mach-zx/platsmp.c
+++ b/arch/arm/mach-zx/platsmp.c
@@ -176,7 +176,7 @@ static void zx_secondary_init(unsigned int cpu)
 	scu_power_mode(scu_base, SCU_PM_NORMAL);
 }
 
-struct smp_operations zx_smp_ops __initdata = {
+static const struct smp_operations zx_smp_ops __initconst = {
 	.smp_prepare_cpus	= zx_smp_prepare_cpus,
 	.smp_secondary_init	= zx_secondary_init,
 	.smp_boot_secondary	= zx_boot_secondary,
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 78e5e007f52d..fd0aeeb09881 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,5 +1,7 @@
 config ARCH_ZYNQ
-	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
+	bool "Xilinx Zynq ARM Cortex A9 Platform"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot
deleted file mode 100644
index 760a0efe7580..000000000000
--- a/arch/arm/mach-zynq/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 6f39d03cc27e..860ffb663f02 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -150,8 +150,6 @@ out:
 
 static void __init zynq_timer_init(void)
 {
-	zynq_early_slcr_init();
-
 	zynq_clock_init();
 	of_clk_init(NULL);
 	clocksource_probe();
@@ -186,6 +184,7 @@ static void __init zynq_map_io(void)
 
 static void __init zynq_irq_init(void)
 {
+	zynq_early_slcr_init();
 	irqchip_init();
 }
 
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 79cda2e5fa4e..e771933db7e8 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -30,7 +30,7 @@ extern char zynq_secondary_trampoline;
 extern char zynq_secondary_trampoline_jump;
 extern char zynq_secondary_trampoline_end;
 extern int zynq_cpun_start(u32 address, int cpu);
-extern struct smp_operations zynq_smp_ops __initdata;
+extern const struct smp_operations zynq_smp_ops;
 #endif
 
 extern void __iomem *zynq_scu_base;
diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c
index f66816c49186..7cd9865bdeb7 100644
--- a/arch/arm/mach-zynq/platsmp.c
+++ b/arch/arm/mach-zynq/platsmp.c
@@ -157,7 +157,7 @@ static void zynq_cpu_die(unsigned int cpu)
 }
 #endif
 
-struct smp_operations zynq_smp_ops __initdata = {
+const struct smp_operations zynq_smp_ops __initconst = {
 	.smp_init_cpus		= zynq_smp_init_cpus,
 	.smp_prepare_cpus	= zynq_smp_prepare_cpus,
 	.smp_boot_secondary	= zynq_boot_secondary,
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index 26320ebf3493..f0292a30e6f6 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -28,6 +28,7 @@
 #define SLCR_A9_CPU_RST_CTRL_OFFSET	0x244 /* CPU Software Reset Control */
 #define SLCR_REBOOT_STATUS_OFFSET	0x258 /* PS Reboot Status */
 #define SLCR_PSS_IDCODE			0x530 /* PS IDCODE */
+#define SLCR_L2C_RAM			0xA1C /* L2C_RAM in AR#54190 */
 
 #define SLCR_UNLOCK_MAGIC		0xDF0D
 #define SLCR_A9_CPU_CLKSTOP		0x10
@@ -227,6 +228,9 @@ int __init zynq_early_slcr_init(void)
 	/* unlock the SLCR so that registers can be changed */
 	zynq_slcr_unlock();
 
+	/* See AR#54190 design advisory */
+	regmap_update_bits(zynq_slcr_regmap, SLCR_L2C_RAM, 0x70707, 0x20202);
+
 	register_restart_handler(&zynq_slcr_restart_nb);
 
 	pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c21941349b3e..55347662e5ed 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -21,7 +21,7 @@ config CPU_ARM7TDMI
 
 # ARM720T
 config CPU_ARM720T
-	bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
 	select CPU_CACHE_V4
@@ -39,7 +39,7 @@ config CPU_ARM720T
 
 # ARM740T
 config CPU_ARM740T
-	bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
@@ -71,7 +71,7 @@ config CPU_ARM9TDMI
 
 # ARM920T
 config CPU_ARM920T
-	bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -89,7 +89,7 @@ config CPU_ARM920T
 
 # ARM922T
 config CPU_ARM922T
-	bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -108,7 +108,7 @@ config CPU_ARM922T
 
 # ARM925T
 config CPU_ARM925T
- 	bool "Support ARM925T processor" if ARCH_OMAP1
+	bool
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -127,7 +127,7 @@ config CPU_ARM925T
 
 # ARM926T
 config CPU_ARM926T
-	bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT
@@ -163,7 +163,7 @@ config CPU_FA526
 
 # ARM940T
 config CPU_ARM940T
-	bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
@@ -181,7 +181,7 @@ config CPU_ARM940T
 
 # ARM946E-S
 config CPU_ARM946E
-	bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
@@ -198,7 +198,7 @@ config CPU_ARM946E
 
 # ARM1020 - needs validating
 config CPU_ARM1020
-	bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
@@ -216,7 +216,7 @@ config CPU_ARM1020
 
 # ARM1020E - needs validating
 config CPU_ARM1020E
-	bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	depends on n
 	select CPU_32v5
 	select CPU_ABRT_EV4T
@@ -229,7 +229,7 @@ config CPU_ARM1020E
 
 # ARM1022E
 config CPU_ARM1022
-	bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_VIVT
@@ -247,7 +247,7 @@ config CPU_ARM1022
 
 # ARM1026EJ-S
 config CPU_ARM1026
-	bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
+	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
 	select CPU_CACHE_VIVT
@@ -358,7 +358,7 @@ config CPU_PJ4B
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_CACHE_V6
@@ -371,7 +371,7 @@ config CPU_V6
 
 # ARMv6k
 config CPU_V6K
-	bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6
 	select CPU_32v6K
 	select CPU_ABRT_EV6
@@ -385,7 +385,7 @@ config CPU_V6K
 
 # ARMv7
 config CPU_V7
-	bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
+	bool
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
@@ -974,6 +974,16 @@ config CACHE_TAUROS2
 	  This option enables the Tauros2 L2 cache controller (as
 	  found on PJ1/PJ4).
 
+config CACHE_UNIPHIER
+	bool "Enable the UniPhier outer cache controller"
+	depends on ARCH_UNIPHIER
+	default y
+	select OUTER_CACHE
+	select OUTER_CACHE_SYNC
+	help
+	  This option enables the UniPhier outer cache (system cache)
+	  controller.
+
 config CACHE_XSC3L2
 	bool "Enable the L2 cache on XScale3"
 	depends on CPU_XSC3
@@ -995,8 +1005,6 @@ config ARM_L1_CACHE_SHIFT
 
 config ARM_DMA_MEM_BUFFERABLE
 	bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
-	depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
-		     MACH_REALVIEW_PB11MP)
 	default y if CPU_V6 || CPU_V6K || CPU_V7
 	help
 	  Historically, the kernel has used strongly ordered mappings to
@@ -1029,24 +1037,26 @@ config ARCH_SUPPORTS_BIG_ENDIAN
 	  This option specifies the architecture can support big endian
 	  operation.
 
-config ARM_KERNMEM_PERMS
-	bool "Restrict kernel memory permissions"
-	depends on MMU
-	help
-	  If this is set, kernel memory other than kernel text (and rodata)
-	  will be made non-executable. The tradeoff is that each region is
-	  padded to section-size (1MiB) boundaries (because their permissions
-	  are different and splitting the 1M pages into 4K ones causes TLB
-	  performance problems), wasting memory.
-
 config DEBUG_RODATA
 	bool "Make kernel text and rodata read-only"
-	depends on ARM_KERNMEM_PERMS
+	depends on MMU && !XIP_KERNEL
+	default y if CPU_V7
+	help
+	  If this is set, kernel text and rodata memory will be made
+	  read-only, and non-text kernel memory will be made non-executable.
+	  The tradeoff is that each region is padded to section-size (1MiB)
+	  boundaries (because their permissions are different and splitting
+	  the 1M pages into 4K ones causes TLB performance problems), which
+	  can waste memory.
+
+config DEBUG_ALIGN_RODATA
+	bool "Make rodata strictly non-executable"
+	depends on DEBUG_RODATA
 	default y
 	help
-	  If this is set, kernel text and rodata will be made read-only. This
-	  is to help catch accidental or malicious attempts to change the
-	  kernel's executable code. Additionally splits rodata from kernel
-	  text so it can be made explicitly non-executable. This creates
-	  another section-size padded region, so it can waste more memory
-	  space while gaining the read-only protections.
+	  If this is set, rodata will be made explicitly non-executable. This
+	  provides protection on the rare chance that attackers might find and
+	  use ROP gadgets that exist in the rodata section. This adds an
+	  additional section-aligned split of rodata from kernel text so it
+	  can be made explicitly non-executable. This padding may waste memory
+	  space to gain the additional protection.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 57c8df500e8c..7f76d96ce546 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -103,3 +103,4 @@ obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o l2c-l2x0-resume.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
+obj-$(CONFIG_CACHE_UNIPHIER)	+= cache-uniphier.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 493692d838c6..9f9d54271aad 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -790,7 +790,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = {
 };
 
 static int __init __l2c_init(const struct l2c_init_data *data,
-			     u32 aux_val, u32 aux_mask, u32 cache_id)
+			     u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync)
 {
 	struct outer_cache_fns fns;
 	unsigned way_size_bits, ways;
@@ -866,6 +866,10 @@ static int __init __l2c_init(const struct l2c_init_data *data,
 	fns.configure = outer_cache.configure;
 	if (data->fixup)
 		data->fixup(l2x0_base, cache_id, &fns);
+	if (nosync) {
+		pr_info("L2C: disabling outer sync\n");
+		fns.sync = NULL;
+	}
 
 	/*
 	 * Check if l2x0 controller is already enabled.  If we are booting
@@ -925,7 +929,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	if (data->save)
 		data->save(l2x0_base);
 
-	__l2c_init(data, aux_val, aux_mask, cache_id);
+	__l2c_init(data, aux_val, aux_mask, cache_id, false);
 }
 
 #ifdef CONFIG_OF
@@ -1060,6 +1064,18 @@ static void __init l2x0_of_parse(const struct device_node *np,
 		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
 	}
 
+	if (of_property_read_bool(np, "arm,parity-enable")) {
+		mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+		val |= L2C_AUX_CTRL_PARITY_ENABLE;
+	} else if (of_property_read_bool(np, "arm,parity-disable")) {
+		mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+	}
+
+	if (of_property_read_bool(np, "arm,shared-override")) {
+		mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
+		val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
+	}
+
 	ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
 	if (ret)
 		return;
@@ -1176,6 +1192,14 @@ static void __init l2c310_of_parse(const struct device_node *np,
 		*aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
 	}
 
+	if (of_property_read_bool(np, "arm,parity-enable")) {
+		*aux_val |= L2C_AUX_CTRL_PARITY_ENABLE;
+		*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+	} else if (of_property_read_bool(np, "arm,parity-disable")) {
+		*aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+		*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+	}
+
 	prefetch = l2x0_saved_regs.prefetch_ctrl;
 
 	ret = of_property_read_u32(np, "arm,double-linefill", &val);
@@ -1704,6 +1728,7 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 	struct resource res;
 	u32 cache_id, old_aux;
 	u32 cache_level = 2;
+	bool nosync = false;
 
 	np = of_find_matching_node(NULL, l2x0_ids);
 	if (!np)
@@ -1742,6 +1767,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 	if (cache_level != 2)
 		pr_err("L2C: device tree specifies invalid cache level\n");
 
+	nosync = of_property_read_bool(np, "arm,outer-sync-disable");
+
 	/* Read back current (default) hardware configuration */
 	if (data->save)
 		data->save(l2x0_base);
@@ -1756,6 +1783,6 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
 	else
 		cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
 
-	return __l2c_init(data, aux_val, aux_mask, cache_id);
+	return __l2c_init(data, aux_val, aux_mask, cache_id, nosync);
 }
 #endif
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
index 1e373d268c04..88255bea65e4 100644
--- a/arch/arm/mm/cache-tauros2.c
+++ b/arch/arm/mm/cache-tauros2.c
@@ -22,6 +22,11 @@
 #include <asm/cputype.h>
 #include <asm/hardware/cache-tauros2.h>
 
+/* CP15 PJ4 Control configuration register */
+#define CCR_L2C_PREFETCH_DISABLE	BIT(24)
+#define CCR_L2C_ECC_ENABLE		BIT(23)
+#define CCR_L2C_WAY7_4_DISABLE		BIT(21)
+#define CCR_L2C_BURST8_ENABLE		BIT(20)
 
 /*
  * When Tauros2 is used on a CPU that supports the v7 hierarchical
@@ -182,18 +187,18 @@ static void enable_extra_feature(unsigned int features)
 	u = read_extra_features();
 
 	if (features & CACHE_TAUROS2_PREFETCH_ON)
-		u &= ~0x01000000;
+		u &= ~CCR_L2C_PREFETCH_DISABLE;
 	else
-		u |= 0x01000000;
+		u |= CCR_L2C_PREFETCH_DISABLE;
 	pr_info("Tauros2: %s L2 prefetch.\n",
 			(features & CACHE_TAUROS2_PREFETCH_ON)
 			? "Enabling" : "Disabling");
 
 	if (features & CACHE_TAUROS2_LINEFILL_BURST8)
-		u |= 0x00100000;
+		u |= CCR_L2C_BURST8_ENABLE;
 	else
-		u &= ~0x00100000;
-	pr_info("Tauros2: %s line fill burt8.\n",
+		u &= ~CCR_L2C_BURST8_ENABLE;
+	pr_info("Tauros2: %s burst8 line fill.\n",
 			(features & CACHE_TAUROS2_LINEFILL_BURST8)
 			? "Enabling" : "Disabling");
 
@@ -287,16 +292,15 @@ void __init tauros2_init(unsigned int features)
 	node = of_find_matching_node(NULL, tauros2_ids);
 	if (!node) {
 		pr_info("Not found marvell,tauros2-cache, disable it\n");
-		return;
+	} else {
+		ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
+		if (ret) {
+			pr_info("Not found marvell,tauros-cache-features property, "
+				"disable extra features\n");
+			features = 0;
+		} else
+			features = f;
 	}
-
-	ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
-	if (ret) {
-		pr_info("Not found marvell,tauros-cache-features property, "
-			"disable extra features\n");
-		features = 0;
-	} else
-		features = f;
 #endif
 	tauros2_internal_init(features);
 }
diff --git a/arch/arm/mm/cache-uniphier.c b/arch/arm/mm/cache-uniphier.c
new file mode 100644
index 000000000000..a6fa7b73fbe0
--- /dev/null
+++ b/arch/arm/mm/cache-uniphier.c
@@ -0,0 +1,544 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)		"uniphier: " fmt
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-uniphier.h>
+#include <asm/outercache.h>
+
+/* control registers */
+#define UNIPHIER_SSCC		0x0	/* Control Register */
+#define    UNIPHIER_SSCC_BST			BIT(20)	/* UCWG burst read */
+#define    UNIPHIER_SSCC_ACT			BIT(19)	/* Inst-Data separate */
+#define    UNIPHIER_SSCC_WTG			BIT(18)	/* WT gathering on */
+#define    UNIPHIER_SSCC_PRD			BIT(17)	/* enable pre-fetch */
+#define    UNIPHIER_SSCC_ON			BIT(0)	/* enable cache */
+#define UNIPHIER_SSCLPDAWCR	0x30	/* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR	0x34	/* Instruction Active Way Control */
+
+/* revision registers */
+#define UNIPHIER_SSCID		0x0	/* ID Register */
+
+/* operation registers */
+#define UNIPHIER_SSCOPE		0x244	/* Cache Operation Primitive Entry */
+#define    UNIPHIER_SSCOPE_CM_INV		0x0	/* invalidate */
+#define    UNIPHIER_SSCOPE_CM_CLEAN		0x1	/* clean */
+#define    UNIPHIER_SSCOPE_CM_FLUSH		0x2	/* flush */
+#define    UNIPHIER_SSCOPE_CM_SYNC		0x8	/* sync (drain bufs) */
+#define    UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH	0x9	/* flush p-fetch buf */
+#define UNIPHIER_SSCOQM		0x248	/* Cache Operation Queue Mode */
+#define    UNIPHIER_SSCOQM_TID_MASK		(0x3 << 21)
+#define    UNIPHIER_SSCOQM_TID_LRU_DATA		(0x0 << 21)
+#define    UNIPHIER_SSCOQM_TID_LRU_INST		(0x1 << 21)
+#define    UNIPHIER_SSCOQM_TID_WAY		(0x2 << 21)
+#define    UNIPHIER_SSCOQM_S_MASK		(0x3 << 17)
+#define    UNIPHIER_SSCOQM_S_RANGE		(0x0 << 17)
+#define    UNIPHIER_SSCOQM_S_ALL		(0x1 << 17)
+#define    UNIPHIER_SSCOQM_S_WAY		(0x2 << 17)
+#define    UNIPHIER_SSCOQM_CE			BIT(15)	/* notify completion */
+#define    UNIPHIER_SSCOQM_CM_INV		0x0	/* invalidate */
+#define    UNIPHIER_SSCOQM_CM_CLEAN		0x1	/* clean */
+#define    UNIPHIER_SSCOQM_CM_FLUSH		0x2	/* flush */
+#define    UNIPHIER_SSCOQM_CM_PREFETCH		0x3	/* prefetch to cache */
+#define    UNIPHIER_SSCOQM_CM_PREFETCH_BUF	0x4	/* prefetch to pf-buf */
+#define    UNIPHIER_SSCOQM_CM_TOUCH		0x5	/* touch */
+#define    UNIPHIER_SSCOQM_CM_TOUCH_ZERO	0x6	/* touch to zero */
+#define    UNIPHIER_SSCOQM_CM_TOUCH_DIRTY	0x7	/* touch with dirty */
+#define UNIPHIER_SSCOQAD	0x24c	/* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ	0x250	/* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK	0x254	/* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN	0x258	/* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF	0x25c	/* Cache Operation Queue Set Complete*/
+#define    UNIPHIER_SSCOPPQSEF_FE		BIT(1)
+#define    UNIPHIER_SSCOPPQSEF_OE		BIT(0)
+#define UNIPHIER_SSCOLPQS	0x260	/* Cache Operation Queue Status */
+#define    UNIPHIER_SSCOLPQS_EF			BIT(2)
+#define    UNIPHIER_SSCOLPQS_EST		BIT(1)
+#define    UNIPHIER_SSCOLPQS_QST		BIT(0)
+
+/* Is the touch/pre-fetch destination specified by ways? */
+#define UNIPHIER_SSCOQM_TID_IS_WAY(op) \
+		((op & UNIPHIER_SSCOQM_TID_MASK) == UNIPHIER_SSCOQM_TID_WAY)
+/* Is the operation region specified by address range? */
+#define UNIPHIER_SSCOQM_S_IS_RANGE(op) \
+		((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
+
+/**
+ * uniphier_cache_data - UniPhier outer cache specific data
+ *
+ * @ctrl_base: virtual base address of control registers
+ * @rev_base: virtual base address of revision registers
+ * @op_base: virtual base address of operation registers
+ * @way_present_mask: each bit specifies if the way is present
+ * @way_locked_mask: each bit specifies if the way is locked
+ * @nsets: number of associativity sets
+ * @line_size: line size in bytes
+ * @range_op_max_size: max size that can be handled by a single range operation
+ * @list: list node to include this level in the whole cache hierarchy
+ */
+struct uniphier_cache_data {
+	void __iomem *ctrl_base;
+	void __iomem *rev_base;
+	void __iomem *op_base;
+	u32 way_present_mask;
+	u32 way_locked_mask;
+	u32 nsets;
+	u32 line_size;
+	u32 range_op_max_size;
+	struct list_head list;
+};
+
+/*
+ * List of the whole outer cache hierarchy.  This list is only modified during
+ * the early boot stage, so no mutex is taken for the access to the list.
+ */
+static LIST_HEAD(uniphier_cache_list);
+
+/**
+ * __uniphier_cache_sync - perform a sync point for a particular cache level
+ *
+ * @data: cache controller specific data
+ */
+static void __uniphier_cache_sync(struct uniphier_cache_data *data)
+{
+	/* This sequence need not be atomic.  Do not disable IRQ. */
+	writel_relaxed(UNIPHIER_SSCOPE_CM_SYNC,
+		       data->op_base + UNIPHIER_SSCOPE);
+	/* need a read back to confirm */
+	readl_relaxed(data->op_base + UNIPHIER_SSCOPE);
+}
+
+/**
+ * __uniphier_cache_maint_common - run a queue operation for a particular level
+ *
+ * @data: cache controller specific data
+ * @start: start address of range operation (don't care for "all" operation)
+ * @size: data size of range operation (don't care for "all" operation)
+ * @operation: flags to specify the desired cache operation
+ */
+static void __uniphier_cache_maint_common(struct uniphier_cache_data *data,
+					  unsigned long start,
+					  unsigned long size,
+					  u32 operation)
+{
+	unsigned long flags;
+
+	/*
+	 * No spin lock is necessary here because:
+	 *
+	 * [1] This outer cache controller is able to accept maintenance
+	 * operations from multiple CPUs at a time in an SMP system; if a
+	 * maintenance operation is under way and another operation is issued,
+	 * the new one is stored in the queue.  The controller performs one
+	 * operation after another.  If the queue is full, the status register,
+	 * UNIPHIER_SSCOPPQSEF, indicates that the queue registration has
+	 * failed.  The status registers, UNIPHIER_{SSCOPPQSEF, SSCOLPQS}, have
+	 * different instances for each CPU, i.e. each CPU can track the status
+	 * of the maintenance operations triggered by itself.
+	 *
+	 * [2] The cache command registers, UNIPHIER_{SSCOQM, SSCOQAD, SSCOQSZ,
+	 * SSCOQWN}, are shared between multiple CPUs, but the hardware still
+	 * guarantees the registration sequence is atomic; the write access to
+	 * them are arbitrated by the hardware.  The first accessor to the
+	 * register, UNIPHIER_SSCOQM, holds the access right and it is released
+	 * by reading the status register, UNIPHIER_SSCOPPQSEF.  While one CPU
+	 * is holding the access right, other CPUs fail to register operations.
+	 * One CPU should not hold the access right for a long time, so local
+	 * IRQs should be disabled while the following sequence.
+	 */
+	local_irq_save(flags);
+
+	/* clear the complete notification flag */
+	writel_relaxed(UNIPHIER_SSCOLPQS_EF, data->op_base + UNIPHIER_SSCOLPQS);
+
+	do {
+		/* set cache operation */
+		writel_relaxed(UNIPHIER_SSCOQM_CE | operation,
+			       data->op_base + UNIPHIER_SSCOQM);
+
+		/* set address range if needed */
+		if (likely(UNIPHIER_SSCOQM_S_IS_RANGE(operation))) {
+			writel_relaxed(start, data->op_base + UNIPHIER_SSCOQAD);
+			writel_relaxed(size, data->op_base + UNIPHIER_SSCOQSZ);
+		}
+
+		/* set target ways if needed */
+		if (unlikely(UNIPHIER_SSCOQM_TID_IS_WAY(operation)))
+			writel_relaxed(data->way_locked_mask,
+				       data->op_base + UNIPHIER_SSCOQWN);
+	} while (unlikely(readl_relaxed(data->op_base + UNIPHIER_SSCOPPQSEF) &
+			  (UNIPHIER_SSCOPPQSEF_FE | UNIPHIER_SSCOPPQSEF_OE)));
+
+	/* wait until the operation is completed */
+	while (likely(readl_relaxed(data->op_base + UNIPHIER_SSCOLPQS) !=
+		      UNIPHIER_SSCOLPQS_EF))
+		cpu_relax();
+
+	local_irq_restore(flags);
+}
+
+static void __uniphier_cache_maint_all(struct uniphier_cache_data *data,
+				       u32 operation)
+{
+	__uniphier_cache_maint_common(data, 0, 0,
+				      UNIPHIER_SSCOQM_S_ALL | operation);
+
+	__uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_maint_range(struct uniphier_cache_data *data,
+					 unsigned long start, unsigned long end,
+					 u32 operation)
+{
+	unsigned long size;
+
+	/*
+	 * If the start address is not aligned,
+	 * perform a cache operation for the first cache-line
+	 */
+	start = start & ~(data->line_size - 1);
+
+	size = end - start;
+
+	if (unlikely(size >= (unsigned long)(-data->line_size))) {
+		/* this means cache operation for all range */
+		__uniphier_cache_maint_all(data, operation);
+		return;
+	}
+
+	/*
+	 * If the end address is not aligned,
+	 * perform a cache operation for the last cache-line
+	 */
+	size = ALIGN(size, data->line_size);
+
+	while (size) {
+		unsigned long chunk_size = min_t(unsigned long, size,
+						 data->range_op_max_size);
+
+		__uniphier_cache_maint_common(data, start, chunk_size,
+					UNIPHIER_SSCOQM_S_RANGE | operation);
+
+		start += chunk_size;
+		size -= chunk_size;
+	}
+
+	__uniphier_cache_sync(data);
+}
+
+static void __uniphier_cache_enable(struct uniphier_cache_data *data, bool on)
+{
+	u32 val = 0;
+
+	if (on)
+		val = UNIPHIER_SSCC_WTG | UNIPHIER_SSCC_PRD | UNIPHIER_SSCC_ON;
+
+	writel_relaxed(val, data->ctrl_base + UNIPHIER_SSCC);
+}
+
+static void __init __uniphier_cache_set_locked_ways(
+					struct uniphier_cache_data *data,
+					u32 way_mask)
+{
+	data->way_locked_mask = way_mask & data->way_present_mask;
+
+	writel_relaxed(~data->way_locked_mask & data->way_present_mask,
+		       data->ctrl_base + UNIPHIER_SSCLPDAWCR);
+}
+
+static void uniphier_cache_maint_range(unsigned long start, unsigned long end,
+				       u32 operation)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry(data, &uniphier_cache_list, list)
+		__uniphier_cache_maint_range(data, start, end, operation);
+}
+
+static void uniphier_cache_maint_all(u32 operation)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry(data, &uniphier_cache_list, list)
+		__uniphier_cache_maint_all(data, operation);
+}
+
+static void uniphier_cache_inv_range(unsigned long start, unsigned long end)
+{
+	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_clean_range(unsigned long start, unsigned long end)
+{
+	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_CLEAN);
+}
+
+static void uniphier_cache_flush_range(unsigned long start, unsigned long end)
+{
+	uniphier_cache_maint_range(start, end, UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void __init uniphier_cache_inv_all(void)
+{
+	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_INV);
+}
+
+static void uniphier_cache_flush_all(void)
+{
+	uniphier_cache_maint_all(UNIPHIER_SSCOQM_CM_FLUSH);
+}
+
+static void uniphier_cache_disable(void)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry_reverse(data, &uniphier_cache_list, list)
+		__uniphier_cache_enable(data, false);
+
+	uniphier_cache_flush_all();
+}
+
+static void __init uniphier_cache_enable(void)
+{
+	struct uniphier_cache_data *data;
+
+	uniphier_cache_inv_all();
+
+	list_for_each_entry(data, &uniphier_cache_list, list) {
+		__uniphier_cache_enable(data, true);
+		__uniphier_cache_set_locked_ways(data, 0);
+	}
+}
+
+static void uniphier_cache_sync(void)
+{
+	struct uniphier_cache_data *data;
+
+	list_for_each_entry(data, &uniphier_cache_list, list)
+		__uniphier_cache_sync(data);
+}
+
+int __init uniphier_cache_l2_is_enabled(void)
+{
+	struct uniphier_cache_data *data;
+
+	data = list_first_entry_or_null(&uniphier_cache_list,
+					struct uniphier_cache_data, list);
+	if (!data)
+		return 0;
+
+	return !!(readl_relaxed(data->ctrl_base + UNIPHIER_SSCC) &
+		  UNIPHIER_SSCC_ON);
+}
+
+void __init uniphier_cache_l2_touch_range(unsigned long start,
+					  unsigned long end)
+{
+	struct uniphier_cache_data *data;
+
+	data = list_first_entry_or_null(&uniphier_cache_list,
+					struct uniphier_cache_data, list);
+	if (data)
+		__uniphier_cache_maint_range(data, start, end,
+					     UNIPHIER_SSCOQM_TID_WAY |
+					     UNIPHIER_SSCOQM_CM_TOUCH);
+}
+
+void __init uniphier_cache_l2_set_locked_ways(u32 way_mask)
+{
+	struct uniphier_cache_data *data;
+
+	data = list_first_entry_or_null(&uniphier_cache_list,
+					struct uniphier_cache_data, list);
+	if (data)
+		__uniphier_cache_set_locked_ways(data, way_mask);
+}
+
+static const struct of_device_id uniphier_cache_match[] __initconst = {
+	{
+		.compatible = "socionext,uniphier-system-cache",
+	},
+	{ /* sentinel */ }
+};
+
+static int __init __uniphier_cache_init(struct device_node *np,
+					unsigned int *cache_level)
+{
+	struct uniphier_cache_data *data;
+	u32 level, cache_size;
+	struct device_node *next_np;
+	int ret = 0;
+
+	if (!of_match_node(uniphier_cache_match, np)) {
+		pr_err("L%d: not compatible with uniphier cache\n",
+		       *cache_level);
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32(np, "cache-level", &level)) {
+		pr_err("L%d: cache-level is not specified\n", *cache_level);
+		return -EINVAL;
+	}
+
+	if (level != *cache_level) {
+		pr_err("L%d: cache-level is unexpected value %d\n",
+		       *cache_level, level);
+		return -EINVAL;
+	}
+
+	if (!of_property_read_bool(np, "cache-unified")) {
+		pr_err("L%d: cache-unified is not specified\n", *cache_level);
+		return -EINVAL;
+	}
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (of_property_read_u32(np, "cache-line-size", &data->line_size) ||
+	    !is_power_of_2(data->line_size)) {
+		pr_err("L%d: cache-line-size is unspecified or invalid\n",
+		       *cache_level);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (of_property_read_u32(np, "cache-sets", &data->nsets) ||
+	    !is_power_of_2(data->nsets)) {
+		pr_err("L%d: cache-sets is unspecified or invalid\n",
+		       *cache_level);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (of_property_read_u32(np, "cache-size", &cache_size) ||
+	    cache_size == 0 || cache_size % (data->nsets * data->line_size)) {
+		pr_err("L%d: cache-size is unspecified or invalid\n",
+		       *cache_level);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	data->way_present_mask =
+		((u32)1 << cache_size / data->nsets / data->line_size) - 1;
+
+	data->ctrl_base = of_iomap(np, 0);
+	if (!data->ctrl_base) {
+		pr_err("L%d: failed to map control register\n", *cache_level);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	data->rev_base = of_iomap(np, 1);
+	if (!data->rev_base) {
+		pr_err("L%d: failed to map revision register\n", *cache_level);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	data->op_base = of_iomap(np, 2);
+	if (!data->op_base) {
+		pr_err("L%d: failed to map operation register\n", *cache_level);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (*cache_level == 2) {
+		u32 revision = readl(data->rev_base + UNIPHIER_SSCID);
+		/*
+		 * The size of range operation is limited to (1 << 22) or less
+		 * for PH-sLD8 or older SoCs.
+		 */
+		if (revision <= 0x16)
+			data->range_op_max_size = (u32)1 << 22;
+	}
+
+	data->range_op_max_size -= data->line_size;
+
+	INIT_LIST_HEAD(&data->list);
+	list_add_tail(&data->list, &uniphier_cache_list); /* no mutex */
+
+	/*
+	 * OK, this level has been successfully initialized.  Look for the next
+	 * level cache.  Do not roll back even if the initialization of the
+	 * next level cache fails because we want to continue with available
+	 * cache levels.
+	 */
+	next_np = of_find_next_cache_node(np);
+	if (next_np) {
+		(*cache_level)++;
+		ret = __uniphier_cache_init(next_np, cache_level);
+	}
+	of_node_put(next_np);
+
+	return ret;
+err:
+	iounmap(data->op_base);
+	iounmap(data->rev_base);
+	iounmap(data->ctrl_base);
+	kfree(data);
+
+	return ret;
+}
+
+int __init uniphier_cache_init(void)
+{
+	struct device_node *np = NULL;
+	unsigned int cache_level;
+	int ret = 0;
+
+	/* look for level 2 cache */
+	while ((np = of_find_matching_node(np, uniphier_cache_match)))
+		if (!of_property_read_u32(np, "cache-level", &cache_level) &&
+		    cache_level == 2)
+			break;
+
+	if (!np)
+		return -ENODEV;
+
+	ret = __uniphier_cache_init(np, &cache_level);
+	of_node_put(np);
+
+	if (ret) {
+		/*
+		 * Error out iif L2 initialization fails.  Continue with any
+		 * error on L3 or outer because they are optional.
+		 */
+		if (cache_level == 2) {
+			pr_err("failed to initialize L2 cache\n");
+			return ret;
+		}
+
+		cache_level--;
+		ret = 0;
+	}
+
+	outer_cache.inv_range = uniphier_cache_inv_range;
+	outer_cache.clean_range = uniphier_cache_clean_range;
+	outer_cache.flush_range = uniphier_cache_flush_range;
+	outer_cache.flush_all = uniphier_cache_flush_all;
+	outer_cache.disable = uniphier_cache_disable;
+	outer_cache.sync = uniphier_cache_sync;
+
+	uniphier_cache_enable();
+
+	pr_info("enabled outer cache (cache level: %d)\n", cache_level);
+
+	return ret;
+}
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 845769e41332..c8c8b9ed02e0 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -165,13 +165,28 @@ static void flush_context(unsigned int cpu)
 		__flush_icache_all();
 }
 
-static int is_reserved_asid(u64 asid)
+static bool check_update_reserved_asid(u64 asid, u64 newasid)
 {
 	int cpu;
-	for_each_possible_cpu(cpu)
-		if (per_cpu(reserved_asids, cpu) == asid)
-			return 1;
-	return 0;
+	bool hit = false;
+
+	/*
+	 * Iterate over the set of reserved ASIDs looking for a match.
+	 * If we find one, then we can update our mm to use newasid
+	 * (i.e. the same ASID in the current generation) but we can't
+	 * exit the loop early, since we need to ensure that all copies
+	 * of the old ASID are updated to reflect the mm. Failure to do
+	 * so could result in us missing the reserved ASID in a future
+	 * generation.
+	 */
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(reserved_asids, cpu) == asid) {
+			hit = true;
+			per_cpu(reserved_asids, cpu) = newasid;
+		}
+	}
+
+	return hit;
 }
 
 static u64 new_context(struct mm_struct *mm, unsigned int cpu)
@@ -181,12 +196,14 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 	u64 generation = atomic64_read(&asid_generation);
 
 	if (asid != 0) {
+		u64 newasid = generation | (asid & ~ASID_MASK);
+
 		/*
 		 * If our current ASID was active during a rollover, we
 		 * can continue to use it and this was just a false alarm.
 		 */
-		if (is_reserved_asid(asid))
-			return generation | (asid & ~ASID_MASK);
+		if (check_update_reserved_asid(asid, newasid))
+			return newasid;
 
 		/*
 		 * We had a valid ASID in a previous life, so try to re-use
@@ -194,7 +211,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 		 */
 		asid &= ~ASID_MASK;
 		if (!__test_and_set_bit(asid, asid_map))
-			goto bump_gen;
+			return newasid;
 	}
 
 	/*
@@ -216,11 +233,8 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 
 	__set_bit(asid, asid_map);
 	cur_idx = asid;
-
-bump_gen:
-	asid |= generation;
 	cpumask_clear(mm_cpumask(mm));
-	return asid;
+	return asid | generation;
 }
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index ad4eb2d26e16..deac58d5f1f7 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -42,6 +42,55 @@
 #include "dma.h"
 #include "mm.h"
 
+struct arm_dma_alloc_args {
+	struct device *dev;
+	size_t size;
+	gfp_t gfp;
+	pgprot_t prot;
+	const void *caller;
+	bool want_vaddr;
+};
+
+struct arm_dma_free_args {
+	struct device *dev;
+	size_t size;
+	void *cpu_addr;
+	struct page *page;
+	bool want_vaddr;
+};
+
+struct arm_dma_allocator {
+	void *(*alloc)(struct arm_dma_alloc_args *args,
+		       struct page **ret_page);
+	void (*free)(struct arm_dma_free_args *args);
+};
+
+struct arm_dma_buffer {
+	struct list_head list;
+	void *virt;
+	struct arm_dma_allocator *allocator;
+};
+
+static LIST_HEAD(arm_dma_bufs);
+static DEFINE_SPINLOCK(arm_dma_bufs_lock);
+
+static struct arm_dma_buffer *arm_dma_buffer_find(void *virt)
+{
+	struct arm_dma_buffer *buf, *found = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&arm_dma_bufs_lock, flags);
+	list_for_each_entry(buf, &arm_dma_bufs, list) {
+		if (buf->virt == virt) {
+			list_del(&buf->list);
+			found = buf;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&arm_dma_bufs_lock, flags);
+	return found;
+}
+
 /*
  * The DMA API is built upon the notion of "buffer ownership".  A buffer
  * is either exclusively owned by the CPU (and therefore may be accessed
@@ -592,7 +641,7 @@ static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot)
 #define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv)	NULL
 #define __alloc_from_pool(size, ret_page)			NULL
 #define __alloc_from_contiguous(dev, size, prot, ret, c, wv)	NULL
-#define __free_from_pool(cpu_addr, size)			0
+#define __free_from_pool(cpu_addr, size)			do { } while (0)
 #define __free_from_contiguous(dev, page, cpu_addr, size, wv)	do { } while (0)
 #define __dma_free_remap(cpu_addr, size)			do { } while (0)
 
@@ -610,7 +659,78 @@ static void *__alloc_simple_buffer(struct device *dev, size_t size, gfp_t gfp,
 	return page_address(page);
 }
 
+static void *simple_allocator_alloc(struct arm_dma_alloc_args *args,
+				    struct page **ret_page)
+{
+	return __alloc_simple_buffer(args->dev, args->size, args->gfp,
+				     ret_page);
+}
+
+static void simple_allocator_free(struct arm_dma_free_args *args)
+{
+	__dma_free_buffer(args->page, args->size);
+}
+
+static struct arm_dma_allocator simple_allocator = {
+	.alloc = simple_allocator_alloc,
+	.free = simple_allocator_free,
+};
+
+static void *cma_allocator_alloc(struct arm_dma_alloc_args *args,
+				 struct page **ret_page)
+{
+	return __alloc_from_contiguous(args->dev, args->size, args->prot,
+				       ret_page, args->caller,
+				       args->want_vaddr);
+}
+
+static void cma_allocator_free(struct arm_dma_free_args *args)
+{
+	__free_from_contiguous(args->dev, args->page, args->cpu_addr,
+			       args->size, args->want_vaddr);
+}
+
+static struct arm_dma_allocator cma_allocator = {
+	.alloc = cma_allocator_alloc,
+	.free = cma_allocator_free,
+};
+
+static void *pool_allocator_alloc(struct arm_dma_alloc_args *args,
+				  struct page **ret_page)
+{
+	return __alloc_from_pool(args->size, ret_page);
+}
+
+static void pool_allocator_free(struct arm_dma_free_args *args)
+{
+	__free_from_pool(args->cpu_addr, args->size);
+}
+
+static struct arm_dma_allocator pool_allocator = {
+	.alloc = pool_allocator_alloc,
+	.free = pool_allocator_free,
+};
+
+static void *remap_allocator_alloc(struct arm_dma_alloc_args *args,
+				   struct page **ret_page)
+{
+	return __alloc_remap_buffer(args->dev, args->size, args->gfp,
+				    args->prot, ret_page, args->caller,
+				    args->want_vaddr);
+}
+
+static void remap_allocator_free(struct arm_dma_free_args *args)
+{
+	if (args->want_vaddr)
+		__dma_free_remap(args->cpu_addr, args->size);
 
+	__dma_free_buffer(args->page, args->size);
+}
+
+static struct arm_dma_allocator remap_allocator = {
+	.alloc = remap_allocator_alloc,
+	.free = remap_allocator_free,
+};
 
 static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 			 gfp_t gfp, pgprot_t prot, bool is_coherent,
@@ -619,7 +739,16 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	u64 mask = get_coherent_dma_mask(dev);
 	struct page *page = NULL;
 	void *addr;
-	bool want_vaddr;
+	bool allowblock, cma;
+	struct arm_dma_buffer *buf;
+	struct arm_dma_alloc_args args = {
+		.dev = dev,
+		.size = PAGE_ALIGN(size),
+		.gfp = gfp,
+		.prot = prot,
+		.caller = caller,
+		.want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs),
+	};
 
 #ifdef CONFIG_DMA_API_DEBUG
 	u64 limit = (mask + 1) & ~mask;
@@ -633,6 +762,10 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	if (!mask)
 		return NULL;
 
+	buf = kzalloc(sizeof(*buf), gfp);
+	if (!buf)
+		return NULL;
+
 	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 
@@ -644,28 +777,37 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	 * platform; see CONFIG_HUGETLBFS.
 	 */
 	gfp &= ~(__GFP_COMP);
+	args.gfp = gfp;
 
 	*handle = DMA_ERROR_CODE;
-	size = PAGE_ALIGN(size);
-	want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs);
-
-	if (nommu())
-		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (dev_get_cma_area(dev) && (gfp & __GFP_WAIT))
-		addr = __alloc_from_contiguous(dev, size, prot, &page,
-					       caller, want_vaddr);
-	else if (is_coherent)
-		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (!(gfp & __GFP_WAIT))
-		addr = __alloc_from_pool(size, &page);
+	allowblock = gfpflags_allow_blocking(gfp);
+	cma = allowblock ? dev_get_cma_area(dev) : false;
+
+	if (cma)
+		buf->allocator = &cma_allocator;
+	else if (nommu() || is_coherent)
+		buf->allocator = &simple_allocator;
+	else if (allowblock)
+		buf->allocator = &remap_allocator;
 	else
-		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page,
-					    caller, want_vaddr);
+		buf->allocator = &pool_allocator;
+
+	addr = buf->allocator->alloc(&args, &page);
+
+	if (page) {
+		unsigned long flags;
 
-	if (page)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+		buf->virt = args.want_vaddr ? addr : page;
+
+		spin_lock_irqsave(&arm_dma_bufs_lock, flags);
+		list_add(&buf->list, &arm_dma_bufs);
+		spin_unlock_irqrestore(&arm_dma_bufs_lock, flags);
+	} else {
+		kfree(buf);
+	}
 
-	return want_vaddr ? addr : page;
+	return args.want_vaddr ? addr : page;
 }
 
 /*
@@ -741,25 +883,21 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 			   bool is_coherent)
 {
 	struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
-	bool want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs);
-
-	size = PAGE_ALIGN(size);
-
-	if (nommu()) {
-		__dma_free_buffer(page, size);
-	} else if (!is_coherent && __free_from_pool(cpu_addr, size)) {
+	struct arm_dma_buffer *buf;
+	struct arm_dma_free_args args = {
+		.dev = dev,
+		.size = PAGE_ALIGN(size),
+		.cpu_addr = cpu_addr,
+		.page = page,
+		.want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs),
+	};
+
+	buf = arm_dma_buffer_find(cpu_addr);
+	if (WARN(!buf, "Freeing invalid buffer %p\n", cpu_addr))
 		return;
-	} else if (!dev_get_cma_area(dev)) {
-		if (want_vaddr && !is_coherent)
-			__dma_free_remap(cpu_addr, size);
-		__dma_free_buffer(page, size);
-	} else {
-		/*
-		 * Non-atomic allocations cannot be freed with IRQs disabled
-		 */
-		WARN_ON(irqs_disabled());
-		__free_from_contiguous(dev, page, cpu_addr, size, want_vaddr);
-	}
+
+	buf->allocator->free(&args);
+	kfree(buf);
 }
 
 void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
@@ -1122,6 +1260,9 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping,
 	spin_unlock_irqrestore(&mapping->lock, flags);
 }
 
+/* We'll try 2M, 1M, 64K, and finally 4K; array must end with 0! */
+static const int iommu_order_array[] = { 9, 8, 4, 0 };
+
 static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 					  gfp_t gfp, struct dma_attrs *attrs)
 {
@@ -1129,6 +1270,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 	int count = size >> PAGE_SHIFT;
 	int array_size = count * sizeof(struct page *);
 	int i = 0;
+	int order_idx = 0;
 
 	if (array_size <= PAGE_SIZE)
 		pages = kzalloc(array_size, GFP_KERNEL);
@@ -1154,6 +1296,10 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 		return pages;
 	}
 
+	/* Go straight to 4K chunks if caller says it's OK. */
+	if (dma_get_attr(DMA_ATTR_ALLOC_SINGLE_PAGES, attrs))
+		order_idx = ARRAY_SIZE(iommu_order_array) - 1;
+
 	/*
 	 * IOMMU can map any pages, so himem can also be used here
 	 */
@@ -1162,22 +1308,24 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
 	while (count) {
 		int j, order;
 
-		for (order = __fls(count); order > 0; --order) {
-			/*
-			 * We do not want OOM killer to be invoked as long
-			 * as we can fall back to single pages, so we force
-			 * __GFP_NORETRY for orders higher than zero.
-			 */
-			pages[i] = alloc_pages(gfp | __GFP_NORETRY, order);
-			if (pages[i])
-				break;
+		order = iommu_order_array[order_idx];
+
+		/* Drop down when we get small */
+		if (__fls(count) < order) {
+			order_idx++;
+			continue;
 		}
 
-		if (!pages[i]) {
-			/*
-			 * Fall back to single page allocation.
-			 * Might invoke OOM killer as last resort.
-			 */
+		if (order) {
+			/* See if it's easy to allocate a high-order chunk */
+			pages[i] = alloc_pages(gfp | __GFP_NORETRY, order);
+
+			/* Go down a notch at first sign of pressure */
+			if (!pages[i]) {
+				order_idx++;
+				continue;
+			}
+		} else {
 			pages[i] = alloc_pages(gfp, 0);
 			if (!pages[i])
 				goto error;
@@ -1200,10 +1348,7 @@ error:
 	while (i--)
 		if (pages[i])
 			__free_pages(pages[i], 0);
-	if (array_size <= PAGE_SIZE)
-		kfree(pages);
-	else
-		vfree(pages);
+	kvfree(pages);
 	return NULL;
 }
 
@@ -1211,7 +1356,6 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages,
 			       size_t size, struct dma_attrs *attrs)
 {
 	int count = size >> PAGE_SHIFT;
-	int array_size = count * sizeof(struct page *);
 	int i;
 
 	if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) {
@@ -1222,10 +1366,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages,
 				__free_pages(pages[i], 0);
 	}
 
-	if (array_size <= PAGE_SIZE)
-		kfree(pages);
-	else
-		vfree(pages);
+	kvfree(pages);
 	return 0;
 }
 
@@ -1363,7 +1504,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
-	if (!(gfp & __GFP_WAIT))
+	if (!gfpflags_allow_blocking(gfp))
 		return __iommu_alloc_atomic(dev, size, handle);
 
 	/*
@@ -1521,7 +1662,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg,
 		return -ENOMEM;
 
 	for (count = 0, s = sg; count < (size >> PAGE_SHIFT); s = sg_next(s)) {
-		phys_addr_t phys = sg_phys(s) & PAGE_MASK;
+		phys_addr_t phys = page_to_phys(sg_page(s));
 		unsigned int len = PAGE_ALIGN(s->offset + s->length);
 
 		if (!is_coherent &&
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index daafcf121ce0..ad5841856007 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -346,7 +346,7 @@ retry:
 	up_read(&mm->mmap_sem);
 
 	/*
-	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
+	 * Handle the "normal" case first - VM_FAULT_MAJOR
 	 */
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 1ec8e7590fc6..3cced8455727 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -235,7 +235,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 */
 	if (mapping && cache_is_vipt_aliasing())
 		flush_pfn_alias(page_to_pfn(page),
-				page->index << PAGE_CACHE_SHIFT);
+				page->index << PAGE_SHIFT);
 }
 
 static void __flush_dcache_aliases(struct address_space *mapping, struct page *page)
@@ -250,7 +250,7 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 	 *   data in the current VM view associated with this page.
 	 * - aliasing VIPT: we only need to find one mapping of this page.
 	 */
-	pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+	pgoff = page->index;
 
 	flush_dcache_mmap_lock(mapping);
 	vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {
@@ -330,7 +330,7 @@ void flush_dcache_page(struct page *page)
 	mapping = page_mapping(page);
 
 	if (!cache_ops_need_broadcast() &&
-	    mapping && !page_mapped(page))
+	    mapping && !page_mapcount(page))
 		clear_bit(PG_dcache_clean, &page->flags);
 	else {
 		__flush_dcache_page(mapping, page);
@@ -415,18 +415,3 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
 	 */
 	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
-			  pmd_t *pmdp)
-{
-	pmd_t pmd = pmd_mksplitting(*pmdp);
-	VM_BUG_ON(address & ~PMD_MASK);
-	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
-
-	/* dummy IPI to serialise against fast_gup */
-	kick_all_cpus_sync();
-}
-#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 9df5f09585ca..d02f8187b1cc 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -147,13 +147,3 @@ void *kmap_atomic_pfn(unsigned long pfn)
 
 	return (void *)vaddr;
 }
-
-struct page *kmap_atomic_to_page(const void *ptr)
-{
-	unsigned long vaddr = (unsigned long)ptr;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	return pte_page(get_fixmap_pte(vaddr));
-}
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index e7a81cebbb2e..bd274a05b8ff 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -15,7 +15,7 @@
  * page tables.
  */
 pgd_t *idmap_pgd;
-phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
+unsigned long (*arch_virt_to_idmap)(unsigned long x);
 
 #ifdef CONFIG_ARM_LPAE
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
@@ -86,7 +86,7 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
 
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale_family())
 		prot |= PMD_BIT4;
 
 	pgd += pgd_index(addr);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 8a63b4cdc0f2..370581aeb871 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -22,6 +22,7 @@
 #include <linux/memblock.h>
 #include <linux/dma-contiguous.h>
 #include <linux/sizes.h>
+#include <linux/stop_machine.h>
 
 #include <asm/cp15.h>
 #include <asm/mach-types.h>
@@ -191,7 +192,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
-	return memblock_is_memory(__pfn_to_phys(pfn));
+	return memblock_is_map_memory(__pfn_to_phys(pfn));
 }
 EXPORT_SYMBOL(pfn_valid);
 #endif
@@ -432,6 +433,9 @@ static void __init free_highpages(void)
 		if (end <= max_low)
 			continue;
 
+		if (memblock_is_nomap(mem))
+			continue;
+
 		/* Truncate partial highmem entries */
 		if (start < max_low)
 			start = max_low;
@@ -568,8 +572,9 @@ void __init mem_init(void)
 	}
 }
 
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
 struct section_perm {
+	const char *name;
 	unsigned long start;
 	unsigned long end;
 	pmdval_t mask;
@@ -577,9 +582,13 @@ struct section_perm {
 	pmdval_t clear;
 };
 
+/* First section-aligned location at or after __start_rodata. */
+extern char __start_rodata_section_aligned[];
+
 static struct section_perm nx_perms[] = {
 	/* Make pages tables, etc before _stext RW (set NX). */
 	{
+		.name	= "pre-text NX",
 		.start	= PAGE_OFFSET,
 		.end	= (unsigned long)_stext,
 		.mask	= ~PMD_SECT_XN,
@@ -587,26 +596,26 @@ static struct section_perm nx_perms[] = {
 	},
 	/* Make init RW (set NX). */
 	{
+		.name	= "init NX",
 		.start	= (unsigned long)__init_begin,
 		.end	= (unsigned long)_sdata,
 		.mask	= ~PMD_SECT_XN,
 		.prot	= PMD_SECT_XN,
 	},
-#ifdef CONFIG_DEBUG_RODATA
 	/* Make rodata NX (set RO in ro_perms below). */
 	{
-		.start  = (unsigned long)__start_rodata,
+		.name	= "rodata NX",
+		.start  = (unsigned long)__start_rodata_section_aligned,
 		.end    = (unsigned long)__init_begin,
 		.mask   = ~PMD_SECT_XN,
 		.prot   = PMD_SECT_XN,
 	},
-#endif
 };
 
-#ifdef CONFIG_DEBUG_RODATA
 static struct section_perm ro_perms[] = {
 	/* Make kernel code and rodata RX (set RO). */
 	{
+		.name	= "text/rodata RO",
 		.start  = (unsigned long)_stext,
 		.end    = (unsigned long)__init_begin,
 #ifdef CONFIG_ARM_LPAE
@@ -619,7 +628,6 @@ static struct section_perm ro_perms[] = {
 #endif
 	},
 };
-#endif
 
 /*
  * Updates section permissions only for the current mm (sections are
@@ -627,12 +635,10 @@ static struct section_perm ro_perms[] = {
  * safe to be called with preemption disabled, as under stop_machine().
  */
 static inline void section_update(unsigned long addr, pmdval_t mask,
-				  pmdval_t prot)
+				  pmdval_t prot, struct mm_struct *mm)
 {
-	struct mm_struct *mm;
 	pmd_t *pmd;
 
-	mm = current->active_mm;
 	pmd = pmd_offset(pud_offset(pgd_offset(mm, addr), addr), addr);
 
 #ifdef CONFIG_ARM_LPAE
@@ -656,55 +662,86 @@ static inline bool arch_has_strict_perms(void)
 	return !!(get_cr() & CR_XP);
 }
 
-#define set_section_perms(perms, field)	{				\
-	size_t i;							\
-	unsigned long addr;						\
-									\
-	if (!arch_has_strict_perms())					\
-		return;							\
-									\
-	for (i = 0; i < ARRAY_SIZE(perms); i++) {			\
-		if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) ||	\
-		    !IS_ALIGNED(perms[i].end, SECTION_SIZE)) {		\
-			pr_err("BUG: section %lx-%lx not aligned to %lx\n", \
-				perms[i].start, perms[i].end,		\
-				SECTION_SIZE);				\
-			continue;					\
-		}							\
-									\
-		for (addr = perms[i].start;				\
-		     addr < perms[i].end;				\
-		     addr += SECTION_SIZE)				\
-			section_update(addr, perms[i].mask,		\
-				       perms[i].field);			\
-	}								\
+void set_section_perms(struct section_perm *perms, int n, bool set,
+			struct mm_struct *mm)
+{
+	size_t i;
+	unsigned long addr;
+
+	if (!arch_has_strict_perms())
+		return;
+
+	for (i = 0; i < n; i++) {
+		if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) ||
+		    !IS_ALIGNED(perms[i].end, SECTION_SIZE)) {
+			pr_err("BUG: %s section %lx-%lx not aligned to %lx\n",
+				perms[i].name, perms[i].start, perms[i].end,
+				SECTION_SIZE);
+			continue;
+		}
+
+		for (addr = perms[i].start;
+		     addr < perms[i].end;
+		     addr += SECTION_SIZE)
+			section_update(addr, perms[i].mask,
+				set ? perms[i].prot : perms[i].clear, mm);
+	}
+
+}
+
+static void update_sections_early(struct section_perm perms[], int n)
+{
+	struct task_struct *t, *s;
+
+	read_lock(&tasklist_lock);
+	for_each_process(t) {
+		if (t->flags & PF_KTHREAD)
+			continue;
+		for_each_thread(t, s)
+			set_section_perms(perms, n, true, s->mm);
+	}
+	read_unlock(&tasklist_lock);
+	set_section_perms(perms, n, true, current->active_mm);
+	set_section_perms(perms, n, true, &init_mm);
 }
 
-static inline void fix_kernmem_perms(void)
+int __fix_kernmem_perms(void *unused)
 {
-	set_section_perms(nx_perms, prot);
+	update_sections_early(nx_perms, ARRAY_SIZE(nx_perms));
+	return 0;
+}
+
+void fix_kernmem_perms(void)
+{
+	stop_machine(__fix_kernmem_perms, NULL, NULL);
+}
+
+int __mark_rodata_ro(void *unused)
+{
+	update_sections_early(ro_perms, ARRAY_SIZE(ro_perms));
+	return 0;
 }
 
-#ifdef CONFIG_DEBUG_RODATA
 void mark_rodata_ro(void)
 {
-	set_section_perms(ro_perms, prot);
+	stop_machine(__mark_rodata_ro, NULL, NULL);
 }
 
 void set_kernel_text_rw(void)
 {
-	set_section_perms(ro_perms, clear);
+	set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), false,
+				current->active_mm);
 }
 
 void set_kernel_text_ro(void)
 {
-	set_section_perms(ro_perms, prot);
+	set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true,
+				current->active_mm);
 }
-#endif /* CONFIG_DEBUG_RODATA */
 
 #else
 static inline void fix_kernmem_perms(void) { }
-#endif /* CONFIG_ARM_KERNMEM_PERMS */
+#endif /* CONFIG_DEBUG_RODATA */
 
 void free_tcmmem(void)
 {
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 0c81056c1dd7..66a978d05958 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -30,6 +30,7 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
+#include <asm/early_ioremap.h>
 #include <asm/mmu_context.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
@@ -469,3 +470,11 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
 }
 EXPORT_SYMBOL_GPL(pci_ioremap_io);
 #endif
+
+/*
+ * Must be called after early_fixmap_init
+ */
+void __init early_ioremap_init(void)
+{
+	early_ioremap_setup();
+}
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 407dc786583a..66353caa35b9 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -173,8 +173,7 @@ unsigned long arch_mmap_rnd(void)
 {
 	unsigned long rnd;
 
-	/* 8 bits of randomness in 20 address space bits */
-	rnd = (unsigned long)get_random_int() % (1 << 8);
+	rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
 
 	return rnd << PAGE_SHIFT;
 }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4867f5daf82c..62f4d01941f7 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -390,7 +390,7 @@ void __init early_fixmap_init(void)
 	 * The early fixmap range spans multiple pmds, for which
 	 * we are not prepared:
 	 */
-	BUILD_BUG_ON((__fix_to_virt(__end_of_permanent_fixed_addresses) >> PMD_SHIFT)
+	BUILD_BUG_ON((__fix_to_virt(__end_of_early_ioremap_region) >> PMD_SHIFT)
 		     != FIXADDR_TOP >> PMD_SHIFT);
 
 	pmd = fixmap_pmd(FIXADDR_TOP);
@@ -477,7 +477,7 @@ static void __init build_mem_type_table(void)
 	 * "update-able on write" bit on ARM610).  However, Xscale and
 	 * Xscale3 require this bit to be cleared.
 	 */
-	if (cpu_is_xscale() || cpu_is_xsc3()) {
+	if (cpu_is_xscale_family()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			mem_types[i].prot_sect &= ~PMD_BIT4;
 			mem_types[i].prot_l1 &= ~PMD_BIT4;
@@ -572,7 +572,7 @@ static void __init build_mem_type_table(void)
 	 * in the Short-descriptor translation table format descriptors.
 	 */
 	if (cpu_arch == CPU_ARCH_ARMv7 &&
-		(read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) == 4) {
+		(read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) >= 4) {
 		user_pmd_table |= PMD_PXNTABLE;
 	}
 #endif
@@ -724,30 +724,49 @@ static void __init *early_alloc(unsigned long sz)
 	return early_alloc_aligned(sz, sz);
 }
 
-static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
+static void *__init late_alloc(unsigned long sz)
+{
+	void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz));
+
+	BUG_ON(!ptr);
+	return ptr;
+}
+
+static pte_t * __init arm_pte_alloc(pmd_t *pmd, unsigned long addr,
+				unsigned long prot,
+				void *(*alloc)(unsigned long sz))
 {
 	if (pmd_none(*pmd)) {
-		pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
+		pte_t *pte = alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
 		__pmd_populate(pmd, __pa(pte), prot);
 	}
 	BUG_ON(pmd_bad(*pmd));
 	return pte_offset_kernel(pmd, addr);
 }
 
+static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
+				      unsigned long prot)
+{
+	return arm_pte_alloc(pmd, addr, prot, early_alloc);
+}
+
 static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 				  unsigned long end, unsigned long pfn,
-				  const struct mem_type *type)
+				  const struct mem_type *type,
+				  void *(*alloc)(unsigned long sz),
+				  bool ng)
 {
-	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
+	pte_t *pte = arm_pte_alloc(pmd, addr, type->prot_l1, alloc);
 	do {
-		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
+		set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)),
+			    ng ? PTE_EXT_NG : 0);
 		pfn++;
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
 static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
 			unsigned long end, phys_addr_t phys,
-			const struct mem_type *type)
+			const struct mem_type *type, bool ng)
 {
 	pmd_t *p = pmd;
 
@@ -765,7 +784,7 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
 		pmd++;
 #endif
 	do {
-		*pmd = __pmd(phys | type->prot_sect);
+		*pmd = __pmd(phys | type->prot_sect | (ng ? PMD_SECT_nG : 0));
 		phys += SECTION_SIZE;
 	} while (pmd++, addr += SECTION_SIZE, addr != end);
 
@@ -774,7 +793,8 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
 
 static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 				      unsigned long end, phys_addr_t phys,
-				      const struct mem_type *type)
+				      const struct mem_type *type,
+				      void *(*alloc)(unsigned long sz), bool ng)
 {
 	pmd_t *pmd = pmd_offset(pud, addr);
 	unsigned long next;
@@ -792,10 +812,10 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 		 */
 		if (type->prot_sect &&
 				((addr | next | phys) & ~SECTION_MASK) == 0) {
-			__map_init_section(pmd, addr, next, phys, type);
+			__map_init_section(pmd, addr, next, phys, type, ng);
 		} else {
 			alloc_init_pte(pmd, addr, next,
-						__phys_to_pfn(phys), type);
+				       __phys_to_pfn(phys), type, alloc, ng);
 		}
 
 		phys += next - addr;
@@ -805,21 +825,24 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 				  unsigned long end, phys_addr_t phys,
-				  const struct mem_type *type)
+				  const struct mem_type *type,
+				  void *(*alloc)(unsigned long sz), bool ng)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;
 
 	do {
 		next = pud_addr_end(addr, end);
-		alloc_init_pmd(pud, addr, next, phys, type);
+		alloc_init_pmd(pud, addr, next, phys, type, alloc, ng);
 		phys += next - addr;
 	} while (pud++, addr = next, addr != end);
 }
 
 #ifndef CONFIG_ARM_LPAE
-static void __init create_36bit_mapping(struct map_desc *md,
-					const struct mem_type *type)
+static void __init create_36bit_mapping(struct mm_struct *mm,
+					struct map_desc *md,
+					const struct mem_type *type,
+					bool ng)
 {
 	unsigned long addr, length, end;
 	phys_addr_t phys;
@@ -859,7 +882,7 @@ static void __init create_36bit_mapping(struct map_desc *md,
 	 */
 	phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
 
-	pgd = pgd_offset_k(addr);
+	pgd = pgd_offset(mm, addr);
 	end = addr + length;
 	do {
 		pud_t *pud = pud_offset(pgd, addr);
@@ -867,7 +890,8 @@ static void __init create_36bit_mapping(struct map_desc *md,
 		int i;
 
 		for (i = 0; i < 16; i++)
-			*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);
+			*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER |
+				       (ng ? PMD_SECT_nG : 0));
 
 		addr += SUPERSECTION_SIZE;
 		phys += SUPERSECTION_SIZE;
@@ -876,33 +900,15 @@ static void __init create_36bit_mapping(struct map_desc *md,
 }
 #endif	/* !CONFIG_ARM_LPAE */
 
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'.  We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections and
- * supersections.
- */
-static void __init create_mapping(struct map_desc *md)
+static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md,
+				    void *(*alloc)(unsigned long sz),
+				    bool ng)
 {
 	unsigned long addr, length, end;
 	phys_addr_t phys;
 	const struct mem_type *type;
 	pgd_t *pgd;
 
-	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
-		pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",
-			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
-		return;
-	}
-
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-	    md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
-	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
-		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
-			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
-	}
-
 	type = &mem_types[md->type];
 
 #ifndef CONFIG_ARM_LPAE
@@ -910,7 +916,7 @@ static void __init create_mapping(struct map_desc *md)
 	 * Catch 36-bit addresses
 	 */
 	if (md->pfn >= 0x100000) {
-		create_36bit_mapping(md, type);
+		create_36bit_mapping(mm, md, type, ng);
 		return;
 	}
 #endif
@@ -925,12 +931,12 @@ static void __init create_mapping(struct map_desc *md)
 		return;
 	}
 
-	pgd = pgd_offset_k(addr);
+	pgd = pgd_offset(mm, addr);
 	end = addr + length;
 	do {
 		unsigned long next = pgd_addr_end(addr, end);
 
-		alloc_init_pud(pgd, addr, next, phys, type);
+		alloc_init_pud(pgd, addr, next, phys, type, alloc, ng);
 
 		phys += next - addr;
 		addr = next;
@@ -938,6 +944,43 @@ static void __init create_mapping(struct map_desc *md)
 }
 
 /*
+ * Create the page directory entries and any necessary
+ * page tables for the mapping specified by `md'.  We
+ * are able to cope here with varying sizes and address
+ * offsets, and we take full advantage of sections and
+ * supersections.
+ */
+static void __init create_mapping(struct map_desc *md)
+{
+	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
+		pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",
+			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
+		return;
+	}
+
+	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
+	    md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
+	    (md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
+		pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
+			(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
+	}
+
+	__create_mapping(&init_mm, md, early_alloc, false);
+}
+
+void __init create_mapping_late(struct mm_struct *mm, struct map_desc *md,
+				bool ng)
+{
+#ifdef CONFIG_ARM_LPAE
+	pud_t *pud = pud_alloc(mm, pgd_offset(mm, md->virtual), md->virtual);
+	if (WARN_ON(!pud))
+		return;
+	pmd_alloc(mm, pud, 0);
+#endif
+	__create_mapping(mm, md, late_alloc, ng);
+}
+
+/*
  * Create the architecture specific mappings
  */
 void __init iotable_init(struct map_desc *io_desc, int nr)
@@ -1210,7 +1253,7 @@ static inline void prepare_page_table(void)
 
 #ifdef CONFIG_XIP_KERNEL
 	/* The XIP kernel is mapped in the module area -- skip over it */
-	addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
+	addr = ((unsigned long)_exiprom + PMD_SIZE - 1) & PMD_MASK;
 #endif
 	for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -1292,7 +1335,7 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 #ifdef CONFIG_XIP_KERNEL
 	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
 	map.virtual = MODULES_VADDR;
-	map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+	map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK;
 	map.type = MT_ROM;
 	create_mapping(&map);
 #endif
@@ -1383,7 +1426,11 @@ static void __init kmap_init(void)
 static void __init map_lowmem(void)
 {
 	struct memblock_region *reg;
+#ifdef CONFIG_XIP_KERNEL
+	phys_addr_t kernel_x_start = round_down(__pa(_sdata), SECTION_SIZE);
+#else
 	phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
+#endif
 	phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
 
 	/* Map all the lowmem memory banks. */
@@ -1392,6 +1439,9 @@ static void __init map_lowmem(void)
 		phys_addr_t end = start + reg->size;
 		struct map_desc map;
 
+		if (memblock_is_nomap(reg))
+			continue;
+
 		if (end > arm_lowmem_limit)
 			end = arm_lowmem_limit;
 		if (start >= end)
diff --git a/arch/arm/mm/pageattr.c b/arch/arm/mm/pageattr.c
index cf30daff8932..d19b1ad29b07 100644
--- a/arch/arm/mm/pageattr.c
+++ b/arch/arm/mm/pageattr.c
@@ -49,6 +49,9 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}
 
+	if (!numpages)
+		return 0;
+
 	if (start < MODULES_VADDR || start >= MODULES_END)
 		return -EINVAL;
 
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index e683db1b90a3..b8d477321730 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -80,7 +80,7 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 		if (!new_pmd)
 			goto no_pmd;
 
-		new_pte = pte_alloc_map(mm, NULL, new_pmd, 0);
+		new_pte = pte_alloc_map(mm, new_pmd, 0);
 		if (!new_pte)
 			goto no_pte;
 
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index d65edf717bf7..6f07d2ef4ff2 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -342,11 +342,13 @@ ENTRY(cpu_mohawk_switch_mm)
  */
 	.align	5
 ENTRY(cpu_mohawk_set_pte_ext)
+#ifdef CONFIG_MMU
 	armv3_set_pte_ext
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
 	ret	lr
+#endif
 
 .globl	cpu_mohawk_suspend_size
 .equ	cpu_mohawk_suspend_size, 4 * 6
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index de2b246fed38..6fcaac8e200f 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -95,7 +95,7 @@ ENDPROC(cpu_v7_dcache_clean_area)
 .equ	cpu_v7_suspend_size, 4 * 9
 #ifdef CONFIG_ARM_CPU_SUSPEND
 ENTRY(cpu_v7_do_suspend)
-	stmfd	sp!, {r4 - r10, lr}
+	stmfd	sp!, {r4 - r11, lr}
 	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
 	mrc	p15, 0, r5, c13, c0, 3	@ User r/o thread ID
 	stmia	r0!, {r4 - r5}
@@ -112,7 +112,7 @@ ENTRY(cpu_v7_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 1	@ Auxiliary control register
 	mrc	p15, 0, r10, c1, c0, 2	@ Co-processor access control
 	stmia	r0, {r5 - r11}
-	ldmfd	sp!, {r4 - r10, pc}
+	ldmfd	sp!, {r4 - r11, pc}
 ENDPROC(cpu_v7_do_suspend)
 
 ENTRY(cpu_v7_do_resume)
@@ -274,17 +274,19 @@ __v7_ca15mp_setup:
 __v7_b15mp_setup:
 __v7_ca17mp_setup:
 	mov	r10, #0
-1:	adr	r12, __v7_setup_stack		@ the local stack
-	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
+1:	adr	r0, __v7_setup_stack_ptr
+	ldr	r12, [r0]
+	add	r12, r12, r0			@ the local stack
+	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
-	ldmia	r12, {r0-r5, lr}
+	ldmia	r12, {r1-r6, lr}
 #ifdef CONFIG_SMP
+	orr	r10, r10, #(1 << 6)		@ Enable SMP/nAMP mode
 	ALT_SMP(mrc	p15, 0, r0, c1, c0, 1)
-	ALT_UP(mov	r0, #(1 << 6))		@ fake it for UP
-	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
-	orreq	r0, r0, #(1 << 6)		@ Enable SMP/nAMP mode
-	orreq	r0, r0, r10			@ Enable CPU-specific SMP bits
-	mcreq	p15, 0, r0, c1, c0, 1
+	ALT_UP(mov	r0, r10)		@ fake it for UP
+	orr	r10, r10, r0			@ Set required bits
+	teq	r10, r0				@ Were they already set?
+	mcrne	p15, 0, r10, c1, c0, 1		@ No, update register
 #endif
 	b	__v7_setup_cont
 
@@ -415,10 +417,12 @@ __v7_pj4b_setup:
 #endif /* CONFIG_CPU_PJ4B */
 
 __v7_setup:
-	adr	r12, __v7_setup_stack		@ the local stack
-	stmia	r12, {r0-r5, lr}		@ v7_invalidate_l1 touches r0-r6
+	adr	r0, __v7_setup_stack_ptr
+	ldr	r12, [r0]
+	add	r12, r12, r0			@ the local stack
+	stmia	r12, {r1-r6, lr}		@ v7_invalidate_l1 touches r0-r6
 	bl      v7_invalidate_l1
-	ldmia	r12, {r0-r5, lr}
+	ldmia	r12, {r1-r6, lr}
 
 __v7_setup_cont:
 	and	r0, r9, #0xff000000		@ ARM?
@@ -480,11 +484,16 @@ __errata_finish:
 	orr	r0, r0, r6			@ set them
  THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	ret	lr				@ return to head.S:__ret
+
+	.align	2
+__v7_setup_stack_ptr:
+	.word	PHYS_RELATIVE(__v7_setup_stack, .)
 ENDPROC(__v7_setup)
 
+	.bss
 	.align	2
 __v7_setup_stack:
-	.space	4 * 7				@ 12 registers
+	.space	4 * 7				@ 7 registers
 
 	__INITDATA
 
diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S
index 67d9209077c6..7229d8d0be1a 100644
--- a/arch/arm/mm/proc-v7m.S
+++ b/arch/arm/mm/proc-v7m.S
@@ -12,6 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/memory.h>
 #include <asm/v7m.h>
 #include "proc-macros.S"
 
@@ -97,19 +98,19 @@ __v7m_setup:
 	mov	r5, #0x00800000
 	str	r5, [r0, V7M_SCB_SHPR3]	@ set PendSV priority
 
-	@ SVC to run the kernel in this mode
+	@ SVC to switch to handler mode. Notice that this requires sp to
+	@ point to writeable memory because the processor saves
+	@ some registers to the stack.
 	badr	r1, 1f
 	ldr	r5, [r12, #11 * 4]	@ read the SVC vector entry
 	str	r1, [r12, #11 * 4]	@ write the temporary SVC vector entry
 	mov	r6, lr			@ save LR
-	mov	r7, sp			@ save SP
-	ldr	sp, =__v7m_setup_stack_top
+	ldr	sp, =init_thread_union + THREAD_START_SP
 	cpsie	i
 	svc	#0
 1:	cpsid	i
 	str	r5, [r12, #11 * 4]	@ restore the original SVC vector entry
 	mov	lr, r6			@ restore LR
-	mov	sp, r7			@ restore SP
 
 	@ Special-purpose control register
 	mov	r1, #1
@@ -123,11 +124,6 @@ __v7m_setup:
 	ret	lr
 ENDPROC(__v7m_setup)
 
-	.align 2
-__v7m_setup_stack:
-	.space	4 * 8				@ 8 registers
-__v7m_setup_stack_top:
-
 	define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
 
 	.section ".rodata"
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 2f4b14cfddb4..93d0b6d0b63e 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -187,19 +187,6 @@ static inline int mem_words_used(struct jit_ctx *ctx)
 	return fls(ctx->seen & SEEN_MEM);
 }
 
-static inline bool is_load_to_a(u16 inst)
-{
-	switch (inst) {
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		return true;
-	default:
-		return false;
-	}
-}
-
 static void jit_fill_hole(void *area, unsigned int size)
 {
 	u32 *ptr;
@@ -211,7 +198,6 @@ static void jit_fill_hole(void *area, unsigned int size)
 static void build_prologue(struct jit_ctx *ctx)
 {
 	u16 reg_set = saved_regs(ctx);
-	u16 first_inst = ctx->skf->insns[0].code;
 	u16 off;
 
 #ifdef CONFIG_FRAME_POINTER
@@ -241,7 +227,7 @@ static void build_prologue(struct jit_ctx *ctx)
 		emit(ARM_MOV_I(r_X, 0), ctx);
 
 	/* do not leak kernel data to userspace */
-	if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst)))
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
 		emit(ARM_MOV_I(r_A, 0), ctx);
 
 	/* stack space for the BPF_MEM words */
@@ -770,7 +756,8 @@ load_ind:
 		case BPF_ALU | BPF_RSH | BPF_K:
 			if (unlikely(k > 31))
 				return -1;
-			emit(ARM_LSR_I(r_A, r_A, k), ctx);
+			if (k)
+				emit(ARM_LSR_I(r_A, r_A, k), ctx);
 			break;
 		case BPF_ALU | BPF_RSH | BPF_X:
 			update_on_xread(ctx);
@@ -1061,7 +1048,7 @@ void bpf_jit_compile(struct bpf_prog *fp)
 	}
 	build_epilogue(&ctx);
 
-	flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));
+	flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx));
 
 #if __LINUX_ARM_ARCH__ < 7
 	if (ctx.imm_count)
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 8ca94d379bc3..7a327bd32521 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -36,6 +36,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/device.h>
@@ -137,6 +138,31 @@ static int omap_dm_timer_reset(struct omap_dm_timer *timer)
 	return 0;
 }
 
+static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer)
+{
+	int ret;
+	struct clk *parent;
+
+	/*
+	 * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
+	 * do not call clk_get() for these devices.
+	 */
+	if (!timer->fclk)
+		return -ENODEV;
+
+	parent = clk_get(&timer->pdev->dev, NULL);
+	if (IS_ERR(parent))
+		return -ENODEV;
+
+	ret = clk_set_parent(timer->fclk, parent);
+	if (ret < 0)
+		pr_err("%s: failed to set parent\n", __func__);
+
+	clk_put(parent);
+
+	return ret;
+}
+
 static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 {
 	int rc;
@@ -166,7 +192,11 @@ static int omap_dm_timer_prepare(struct omap_dm_timer *timer)
 	__omap_dm_timer_enable_posted(timer);
 	omap_dm_timer_disable(timer);
 
-	return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+	rc = omap_dm_timer_of_set_source(timer);
+	if (rc == -ENODEV)
+		return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
+
+	return rc;
 }
 
 static inline u32 omap_dm_timer_reserved_systimer(int id)
@@ -504,6 +534,12 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 	if (IS_ERR(timer->fclk))
 		return -EINVAL;
 
+#if defined(CONFIG_COMMON_CLK)
+	/* Check if the clock has configurable parents */
+	if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2)
+		return 0;
+#endif
+
 	switch (source) {
 	case OMAP_TIMER_SRC_SYS_CLK:
 		parent_name = "timer_sys_ck";
@@ -943,6 +979,10 @@ static const struct of_device_id omap_timer_match[] = {
 		.compatible = "ti,am335x-timer-1ms",
 		.data = &omap3plus_pdata,
 	},
+	{
+		.compatible = "ti,dm816-timer",
+		.data = &omap3plus_pdata,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_timer_match);
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 8861c367d061..78c8bf4043c0 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -21,7 +21,6 @@
 #include <net/dsa.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
-#include <mach/bridge-regs.h>
 #include <plat/common.h>
 
 /* Create a clkdev entry for a given device/clk */
@@ -589,26 +588,6 @@ void __init orion_spi_1_init(unsigned long mapbase)
 }
 
 /*****************************************************************************
- * Watchdog
- ****************************************************************************/
-static struct resource orion_wdt_resource[] = {
-		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
-		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
-};
-
-static struct platform_device orion_wdt_device = {
-	.name		= "orion_wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
-	.resource	= orion_wdt_resource,
-};
-
-void __init orion_wdt_init(void)
-{
-	platform_device_register(&orion_wdt_device);
-}
-
-/*****************************************************************************
  * XOR
  ****************************************************************************/
 static u64 orion_xor_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 7bd22d8e5b11..f74069386c13 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -154,8 +154,7 @@ err_out:
  */
 static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 
 	if (orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK) ||
 	    orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
@@ -166,8 +165,7 @@ static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 
 static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	if (!orion_gpio_is_valid(ochip, pin, GPIO_INPUT_OK))
@@ -182,8 +180,7 @@ static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
 
 static int orion_gpio_get(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	int val;
 
 	if (readl(GPIO_IO_CONF(ochip)) & (1 << pin)) {
@@ -198,8 +195,7 @@ static int orion_gpio_get(struct gpio_chip *chip, unsigned pin)
 static int
 orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	if (!orion_gpio_is_valid(ochip, pin, GPIO_OUTPUT_OK))
@@ -216,8 +212,7 @@ orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin, int value)
 
 static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	unsigned long flags;
 
 	spin_lock_irqsave(&ochip->lock, flags);
@@ -227,8 +222,7 @@ static void orion_gpio_set(struct gpio_chip *chip, unsigned pin, int value)
 
 static int orion_gpio_to_irq(struct gpio_chip *chip, unsigned pin)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 
 	return irq_create_mapping(ochip->domain,
 				  ochip->secondary_irq_base + pin);
@@ -445,8 +439,8 @@ static void gpio_irq_handler(struct irq_desc *desc)
 
 static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
-	struct orion_gpio_chip *ochip =
-		container_of(chip, struct orion_gpio_chip, chip);
+
+	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
 	int i;
 
@@ -567,7 +561,7 @@ void __init orion_gpio_init(struct device_node *np,
 	ochip->mask_offset = mask_offset;
 	ochip->secondary_irq_base = secondary_irq_base;
 
-	gpiochip_add(&ochip->chip);
+	gpiochip_add_data(&ochip->chip, ochip);
 
 	/*
 	 * Mask and clear GPIO interrupts.
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index d9a24f605a2b..9e6d76ad48a9 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -75,8 +75,6 @@ void __init orion_spi_init(unsigned long mapbase);
 
 void __init orion_spi_1_init(unsigned long mapbase);
 
-void __init orion_wdt_init(void);
-
 void __init orion_xor0_init(unsigned long mapbase_low,
 			    unsigned long mapbase_high,
 			    unsigned long irq_0,
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
index 8c1fc06007c0..5b63b28b00ac 100644
--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -18,7 +18,6 @@
 #include <asm/exception.h>
 #include <plat/irq.h>
 #include <plat/orion-gpio.h>
-#include <mach/bridge-regs.h>
 
 void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 {
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index 7310bcfb299f..5b4ff9373c89 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -13,7 +13,6 @@
 #include <linux/mbus.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <mach/hardware.h>
 #include <plat/orion-gpio.h>
 #include <plat/mpp.h>
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 8085a8aac812..ffb93db68e9c 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/sched_clock.h>
 #include <plat/time.h>
+#include <asm/delay.h>
 
 /*
  * MBus bridge block registers.
@@ -188,6 +189,15 @@ orion_time_set_base(void __iomem *_timer_base)
 	timer_base = _timer_base;
 }
 
+static unsigned long orion_delay_timer_read(void)
+{
+	return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+static struct delay_timer orion_delay_timer = {
+	.read_current_timer = orion_delay_timer_read,
+};
+
 void __init
 orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 		unsigned int irq, unsigned int tclk)
@@ -202,6 +212,9 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
 
 	ticks_per_jiffy = (tclk + HZ/2) / HZ;
 
+	orion_delay_timer.freq = tclk;
+	register_current_timer_delay(&orion_delay_timer);
+
 	/*
 	 * Set scale and timer for sched_clock.
 	 */
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 1fc941944912..557b134db772 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -1,8 +1,9 @@
 #
 # Makefile for code common across different PXA processor families
 #
+ccflags-$(CONFIG_ARCH_MMP) := -I$(srctree)/$(src)/include
 
-obj-y	:= dma.o
+obj-$(CONFIG_ARCH_PXA)		:= dma.o
 
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
index 28848b344e2d..ceba3e4184fc 100644
--- a/arch/arm/plat-pxa/include/plat/dma.h
+++ b/arch/arm/plat-pxa/include/plat/dma.h
@@ -95,6 +95,6 @@ static inline int pxad_toggle_reserved_channel(int legacy_channel)
 }
 #endif
 
-extern void __init pxa2xx_set_dmac_info(int nb_channels);
+extern void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors);
 
 #endif /* __PLAT_DMA_H */
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index daa1a65f2eb7..ba13f793fbce 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -34,7 +34,6 @@
 #include <linux/of_device.h>
 
 #include <asm/irq.h>
-#include <mach/hardware.h>
 
 static DEFINE_MUTEX(ssp_lock);
 static LIST_HEAD(ssp_list);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 57729b915003..e8229b9fee4a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -39,7 +39,6 @@ config S3C_LOWLEVEL_UART_PORT
 
 config SAMSUNG_ATAGS
 	def_bool n
-	depends on !ARCH_MULTIPLATFORM
 	depends on ATAGS
 	help
 	   This option enables ATAGS based boot support code for
@@ -70,6 +69,7 @@ config S3C_GPIO_TRACK
 
 config S3C_ADC
 	bool "ADC common driver support"
+	depends on !ARCH_MULTIPLATFORM
 	help
 	  Core support for the ADC block found in the Samsung SoC systems
 	  for drivers such as the touchscreen and hwmon to use to share
@@ -225,6 +225,9 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
 
+config GPIO_SAMSUNG
+	def_bool y
+
 config SAMSUNG_PM_GPIO
 	bool
 	default y if GPIO_SAMSUNG && PM
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 8c911760f55f..be172efec15c 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -4,7 +4,8 @@
 #
 # Licensed under GPLv2
 
-ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
+ccflags-$(CONFIG_ARCH_S3C64XX) := -I$(srctree)/arch/arm/mach-s3c64xx/include
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include
 
 # Objects we always build independent of SoC choice
 
@@ -21,6 +22,8 @@ obj-$(CONFIG_SAMSUNG_ATAGS)	+= platformdata.o
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= devs.o
 obj-$(CONFIG_SAMSUNG_ATAGS)	+= dev-uart.o
 
+obj-$(CONFIG_GPIO_SAMSUNG)     += gpio-samsung.o
+
 # PM support
 
 obj-$(CONFIG_PM_SLEEP)		+= pm-common.o
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index efa6e85619ad..daf3db9f0058 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -422,8 +422,7 @@ static int s3c_adc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int s3c_adc_suspend(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct adc_device *adc = platform_get_drvdata(pdev);
 	unsigned long flags;
 	u32 con;
@@ -444,8 +443,7 @@ static int s3c_adc_suspend(struct device *dev)
 
 static int s3c_adc_resume(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct adc_device *adc = platform_get_drvdata(pdev);
 	enum s3c_cpu_type cpu = platform_get_device_id(pdev)->driver_data;
 	int ret;
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 82074625de5c..84baa16f4c0b 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -36,7 +36,7 @@
 #include <linux/platform_data/s3c-hsotg.h>
 #include <linux/platform_data/dma-s3c24xx.h>
 
-#include <media/s5p_hdmi.h>
+#include <linux/platform_data/media/s5p_hdmi.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -65,6 +65,7 @@
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-spi.h>
+#include <linux/platform_data/asoc-s3c.h>
 #include <linux/platform_data/spi-s3c64xx.h>
 
 static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
@@ -74,9 +75,15 @@ static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
 static struct resource s3c_ac97_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2440_PA_AC97, S3C2440_SZ_AC97),
 	[1] = DEFINE_RES_IRQ(IRQ_S3C244X_AC97),
-	[2] = DEFINE_RES_DMA_NAMED(DMACH_PCM_OUT, "PCM out"),
-	[3] = DEFINE_RES_DMA_NAMED(DMACH_PCM_IN, "PCM in"),
-	[4] = DEFINE_RES_DMA_NAMED(DMACH_MIC_IN, "Mic in"),
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+#ifdef CONFIG_S3C24XX_DMAC
+	.dma_filter = s3c24xx_dma_filter,
+#endif
+	.dma_playback = (void *)DMACH_PCM_OUT,
+	.dma_capture = (void *)DMACH_PCM_IN,
+	.dma_capture_mic = (void *)DMACH_MIC_IN,
 };
 
 struct platform_device s3c_device_ac97 = {
@@ -87,6 +94,7 @@ struct platform_device s3c_device_ac97 = {
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_ac97_pdata,
 	}
 };
 #endif /* CONFIG_CPU_S3C2440 */
@@ -111,12 +119,12 @@ struct platform_device s3c_device_adc = {
 #if defined(CONFIG_SAMSUNG_DEV_ADC)
 static struct resource s3c_adc_resource[] = {
 	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-	[2] = DEFINE_RES_IRQ(IRQ_ADC),
+	[1] = DEFINE_RES_IRQ(IRQ_ADC),
+	[2] = DEFINE_RES_IRQ(IRQ_TC),
 };
 
 struct platform_device s3c_device_adc = {
-	.name		= "samsung-adc",
+	.name		= "exynos-adc",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s3c_adc_resource),
 	.resource	= s3c_adc_resource,
@@ -566,6 +574,14 @@ static struct resource s3c_iis_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C24XX_PA_IIS, S3C24XX_SZ_IIS),
 };
 
+static struct s3c_audio_pdata s3c_iis_platdata = {
+#ifdef CONFIG_S3C24XX_DMAC
+	.dma_filter = s3c24xx_dma_filter,
+#endif
+	.dma_playback = (void *)DMACH_I2S_OUT,
+	.dma_capture = (void *)DMACH_I2S_IN,
+};
+
 struct platform_device s3c_device_iis = {
 	.name		= "s3c24xx-iis",
 	.id		= -1,
@@ -574,6 +590,7 @@ struct platform_device s3c_device_iis = {
 	.dev		= {
 		.dma_mask		= &samsung_device_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &s3c_iis_platdata,
 	}
 };
 #endif /* CONFIG_PLAT_S3C24XX */
@@ -710,15 +727,6 @@ static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
 			return -ENOMEM;
 	}
 
-	if (set->ecc_layout) {
-		ptr = kmemdup(set->ecc_layout,
-			      sizeof(struct nand_ecclayout), GFP_KERNEL);
-		set->ecc_layout = ptr;
-
-		if (!ptr)
-			return -ENOMEM;
-	}
-
 	return 0;
 }
 
@@ -939,31 +947,19 @@ void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_
 #endif /* CONFIG_PLAT_S3C24XX */
 
 #ifdef CONFIG_SAMSUNG_DEV_TS
-static struct resource s3c_ts_resource[] = {
-	[0] = DEFINE_RES_MEM(SAMSUNG_PA_ADC, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_TC),
-};
-
 static struct s3c2410_ts_mach_info default_ts_data __initdata = {
 	.delay			= 10000,
 	.presc			= 49,
 	.oversampling_shift	= 2,
 };
 
-struct platform_device s3c_device_ts = {
-	.name		= "s3c64xx-ts",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s3c_ts_resource),
-	.resource	= s3c_ts_resource,
-};
-
-void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+void __init s3c64xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
 {
 	if (!pd)
 		pd = &default_ts_data;
 
 	s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info),
-			 &s3c_device_ts);
+			 &s3c_device_adc);
 }
 #endif /* CONFIG_SAMSUNG_DEV_TS */
 
@@ -1100,9 +1096,7 @@ struct platform_device s3c_device_wdt = {
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 static struct resource s3c64xx_spi0_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI0),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI0),
 };
 
 struct platform_device s3c64xx_device_spi0 = {
@@ -1130,6 +1124,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+	pd.dma_tx = (void *)DMACH_SPI0_TX;
+	pd.dma_rx = (void *)DMACH_SPI0_RX;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
 #elif defined(CONFIG_S3C64XX_PL080)
@@ -1145,9 +1141,7 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 #ifdef CONFIG_S3C64XX_DEV_SPI1
 static struct resource s3c64xx_spi1_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI1),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
 };
 
 struct platform_device s3c64xx_device_spi1 = {
@@ -1175,12 +1169,15 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
+	pd.dma_tx = (void *)DMACH_SPI1_TX;
+	pd.dma_rx = (void *)DMACH_SPI1_RX;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
 #elif defined(CONFIG_S3C64XX_PL080)
 	pd.filter = pl08x_filter_id;
 #endif
 
+
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
 }
 #endif /* CONFIG_S3C64XX_DEV_SPI1 */
@@ -1188,9 +1185,7 @@ void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 #ifdef CONFIG_S3C64XX_DEV_SPI2
 static struct resource s3c64xx_spi2_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
-	[1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
-	[2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
-	[3] = DEFINE_RES_IRQ(IRQ_SPI2),
+	[1] = DEFINE_RES_IRQ(IRQ_SPI2),
 };
 
 struct platform_device s3c64xx_device_spi2 = {
@@ -1218,6 +1213,8 @@ void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
 	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
+	pd.dma_tx = (void *)DMACH_SPI2_TX;
+	pd.dma_rx = (void *)DMACH_SPI2_RX;
 #if defined(CONFIG_PL330_DMA)
 	pd.filter = pl330_filter;
 #elif defined(CONFIG_S3C64XX_PL080)
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
new file mode 100644
index 000000000000..7861488f7ca0
--- /dev/null
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -0,0 +1,1328 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SAMSUNG - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+
+#include <asm/irq.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-samsung.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/pm.h>
+
+int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
+				unsigned int off, samsung_gpio_pull_t pull)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup;
+
+	pup = __raw_readl(reg);
+	pup &= ~(3 << shift);
+	pup |= pull << shift;
+	__raw_writel(pup, reg);
+
+	return 0;
+}
+
+samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip,
+						unsigned int off)
+{
+	void __iomem *reg = chip->base + 0x08;
+	int shift = off * 2;
+	u32 pup = __raw_readl(reg);
+
+	pup >>= shift;
+	pup &= 0x3;
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+
+int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip,
+			 unsigned int off, samsung_gpio_pull_t pull)
+{
+	switch (pull) {
+	case S3C_GPIO_PULL_NONE:
+		pull = 0x01;
+		break;
+	case S3C_GPIO_PULL_UP:
+		pull = 0x00;
+		break;
+	case S3C_GPIO_PULL_DOWN:
+		pull = 0x02;
+		break;
+	}
+	return samsung_gpio_setpull_updown(chip, off, pull);
+}
+
+samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	samsung_gpio_pull_t pull;
+
+	pull = samsung_gpio_getpull_updown(chip, off);
+
+	switch (pull) {
+	case 0x00:
+		pull = S3C_GPIO_PULL_UP;
+		break;
+	case 0x01:
+	case 0x03:
+		pull = S3C_GPIO_PULL_NONE;
+		break;
+	case 0x02:
+		pull = S3C_GPIO_PULL_DOWN;
+		break;
+	}
+
+	return pull;
+}
+
+static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip,
+				  unsigned int off, samsung_gpio_pull_t pull,
+				  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	if (pull == updown)
+		pup &= ~(1 << off);
+	else if (pull == S3C_GPIO_PULL_NONE)
+		pup |= (1 << off);
+	else
+		return -EINVAL;
+
+	__raw_writel(pup, reg);
+	return 0;
+}
+
+static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip,
+						  unsigned int off,
+						  samsung_gpio_pull_t updown)
+{
+	void __iomem *reg = chip->base + 0x08;
+	u32 pup = __raw_readl(reg);
+
+	pup &= (1 << off);
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip,
+			     unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
+}
+
+samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip,
+					       unsigned int off)
+{
+	return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip,
+			       unsigned int off, samsung_gpio_pull_t pull)
+{
+	return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+
+/*
+ * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has two bits of configuration per gpio, which have the following
+ * functions:
+ *	00 = input
+ *	01 = output
+ *	1x = special function
+ */
+
+static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off * 2;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		if (cfg > 3)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x3 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
+ * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
+ * S3C_GPIO_SPECIAL() macro.
+ */
+
+static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip,
+					     unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off * 2;
+	con &= 3;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+/*
+ * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ *	0000 = Input
+ *	0001 = Output
+ *	others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of functions for
+ * each case.
+ */
+
+static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip,
+				    unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0xf << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read.
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration
+ * register setting into a value the software can use, such as could be passed
+ * to samsung_gpio_setcfg_4bit().
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ */
+
+static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip,
+					 unsigned int off)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = (off & 7) * 4;
+	u32 con;
+
+	if (off < 8 && chip->chip.ngpio > 8)
+		reg -= 4;
+
+	con = __raw_readl(reg);
+	con >>= shift;
+	con &= 0xf;
+
+	/* this conversion works for IN and OUT as well as special mode */
+	return S3C_GPIO_SPECIAL(con);
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/*
+ * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ * @cfg: The configuration value to set.
+ *
+ * This helper deal with the GPIO cases where the control register
+ * has one bit of configuration for the gpio, where setting the bit
+ * means the pin is in special function mode and unset means output.
+ */
+
+static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip,
+				     unsigned int off, unsigned int cfg)
+{
+	void __iomem *reg = chip->base;
+	unsigned int shift = off;
+	u32 con;
+
+	if (samsung_gpio_is_cfg_special(cfg)) {
+		cfg &= 0xf;
+
+		/* Map output to 0, and SFN2 to 1 */
+		cfg -= 1;
+		if (cfg > 1)
+			return -EINVAL;
+
+		cfg <<= shift;
+	}
+
+	con = __raw_readl(reg);
+	con &= ~(0x1 << shift);
+	con |= cfg;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+/*
+ * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A)
+ * @chip: The gpio chip that is being configured.
+ * @off: The offset for the GPIO being configured.
+ *
+ * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable
+ * GPIO configuration value.
+ *
+ * @sa samsung_gpio_getcfg_2bit
+ * @sa samsung_gpio_getcfg_4bit
+ */
+
+static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip,
+					  unsigned int off)
+{
+	u32 con;
+
+	con = __raw_readl(chip->base);
+	con >>= off;
+	con &= 1;
+	con++;
+
+	return S3C_GPIO_SFN(con);
+}
+#endif
+
+static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg,
+					   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chipcfg++) {
+		if (!chipcfg->set_config)
+			chipcfg->set_config = samsung_gpio_setcfg_4bit;
+		if (!chipcfg->get_config)
+			chipcfg->get_config = samsung_gpio_getcfg_4bit;
+		if (!chipcfg->set_pull)
+			chipcfg->set_pull = samsung_gpio_setpull_updown;
+		if (!chipcfg->get_pull)
+			chipcfg->get_pull = samsung_gpio_getpull_updown;
+	}
+}
+
+struct samsung_gpio_cfg s3c24xx_gpiocfg_default = {
+	.set_config	= samsung_gpio_setcfg_2bit,
+	.get_config	= samsung_gpio_getcfg_2bit,
+};
+
+#ifdef CONFIG_PLAT_S3C24XX
+static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
+	.set_config	= s3c24xx_gpio_setcfg_abank,
+	.get_config	= s3c24xx_gpio_getcfg_abank,
+};
+#endif
+
+static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
+	[0] = {
+		.cfg_eint	= 0x0,
+	},
+	[1] = {
+		.cfg_eint	= 0x3,
+	},
+	[2] = {
+		.cfg_eint	= 0x7,
+	},
+	[3] = {
+		.cfg_eint	= 0xF,
+	},
+	[4] = {
+		.cfg_eint	= 0x0,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[5] = {
+		.cfg_eint	= 0x2,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[6] = {
+		.cfg_eint	= 0x3,
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+	[7] = {
+		.set_config	= samsung_gpio_setcfg_2bit,
+		.get_config	= samsung_gpio_getcfg_2bit,
+	},
+};
+
+/*
+ * Default routines for controlling GPIO, based on the original S3C24XX
+ * GPIO functions which deal with the case where each gpio bank of the
+ * chip is as following:
+ *
+ * base + 0x00: Control register, 2 bits per gpio
+ *	        gpio n: 2 bits starting at (2*n)
+ *		00 = input, 01 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+*/
+
+static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+
+	__raw_writel(con, base + 0x00);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+static int samsung_gpiolib_2bit_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	con = __raw_readl(base + 0x00);
+	con &= ~(3 << (offset * 2));
+	con |= 1 << (offset * 2);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+	return 0;
+}
+
+/*
+ * The samsung_gpiolib_4bit routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the
+ * state of the output.
+ */
+
+static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	if (ourchip->bitmap_gpio_int & BIT(offset))
+		con |= 0xf << con_4bit_shift(offset);
+	else
+		con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + GPIOCON_OFF);
+
+	pr_debug("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
+				       unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + GPIOCON_OFF);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, base + GPIOCON_OFF);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+/*
+ * The next set of routines are for the case where the GPIO configuration
+ * registers are 4 bits per GPIO but there is more than one register (the
+ * bank has more than 8 GPIOs.
+ *
+ * This case is the similar to the 4 bit case, but the registers are as
+ * follows:
+ *
+ * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs)
+ *		gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x08: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set
+ * routines we store the 'base + 0x4' address so that these routines see
+ * the data register at ourchip->base + 0x04.
+ */
+
+static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
+				       unsigned int offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+
+	if (offset > 7)
+		offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, regcon);
+
+	pr_debug("%s: %p: CON %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
+					unsigned int offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	void __iomem *regcon = base;
+	unsigned long con;
+	unsigned long dat;
+	unsigned con_offset = offset;
+
+	if (con_offset > 7)
+		con_offset -= 8;
+	else
+		regcon -= 4;
+
+	con = __raw_readl(regcon);
+	con &= ~(0xf << con_4bit_shift(con_offset));
+	con |= 0x1 << con_4bit_shift(con_offset);
+
+	dat = __raw_readl(base + GPIODAT_OFF);
+
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + GPIODAT_OFF);
+	__raw_writel(con, regcon);
+	__raw_writel(dat, base + GPIODAT_OFF);
+
+	pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+/* The next set of routines are for the case of s3c24xx bank a */
+
+static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
+{
+	return -EINVAL;
+}
+
+static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+	unsigned long con;
+
+	local_irq_save(flags);
+
+	con = __raw_readl(base + 0x00);
+	dat = __raw_readl(base + 0x04);
+
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+
+	__raw_writel(dat, base + 0x04);
+
+	con &= ~(1 << offset);
+
+	__raw_writel(con, base + 0x00);
+	__raw_writel(dat, base + 0x04);
+
+	local_irq_restore(flags);
+	return 0;
+}
+#endif
+
+static void samsung_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long flags;
+	unsigned long dat;
+
+	samsung_gpio_lock(ourchip, flags);
+
+	dat = __raw_readl(base + 0x04);
+	dat &= ~(1 << offset);
+	if (value)
+		dat |= 1 << offset;
+	__raw_writel(dat, base + 0x04);
+
+	samsung_gpio_unlock(ourchip, flags);
+}
+
+static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip);
+	unsigned long val;
+
+	val = __raw_readl(ourchip->base + 0x04);
+	val >>= offset;
+	val &= 1;
+
+	return val;
+}
+
+/*
+ * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
+ * for use with the configuration calls, and other parts of the s3c gpiolib
+ * support code.
+ *
+ * Not all s3c support code will need this, as some configurations of cpu
+ * may only support one or two different configuration options and have an
+ * easy gpio to samsung_gpio_chip mapping function. If this is the case, then
+ * the machine support file should provide its own samsung_gpiolib_getchip()
+ * and any other necessary functions.
+ */
+
+#ifdef CONFIG_S3C_GPIO_TRACK
+struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
+
+static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip)
+{
+	unsigned int gpn;
+	int i;
+
+	gpn = chip->chip.base;
+	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
+		s3c_gpios[gpn] = chip;
+	}
+}
+#endif /* CONFIG_S3C_GPIO_TRACK */
+
+/*
+ * samsung_gpiolib_add() - add the Samsung gpio_chip.
+ * @chip: The chip to register
+ *
+ * This is a wrapper to gpiochip_add() that takes our specific gpio chip
+ * information and makes the necessary alterations for the platform and
+ * notes the information for use with the configuration systems and any
+ * other parts of the system.
+ */
+
+static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
+{
+	struct gpio_chip *gc = &chip->chip;
+	int ret;
+
+	BUG_ON(!chip->base);
+	BUG_ON(!gc->label);
+	BUG_ON(!gc->ngpio);
+
+	spin_lock_init(&chip->lock);
+
+	if (!gc->direction_input)
+		gc->direction_input = samsung_gpiolib_2bit_input;
+	if (!gc->direction_output)
+		gc->direction_output = samsung_gpiolib_2bit_output;
+	if (!gc->set)
+		gc->set = samsung_gpiolib_set;
+	if (!gc->get)
+		gc->get = samsung_gpiolib_get;
+
+#ifdef CONFIG_PM
+	if (chip->pm != NULL) {
+		if (!chip->pm->save || !chip->pm->resume)
+			pr_err("gpio: %s has missing PM functions\n",
+			       gc->label);
+	} else
+		pr_err("gpio: %s has no PM function\n", gc->label);
+#endif
+
+	/* gpiochip_add() prints own failure message on error. */
+	ret = gpiochip_add_data(gc, chip);
+	if (ret >= 0)
+		s3c_gpiolib_track(chip);
+}
+
+static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
+					     int nr_chips, void __iomem *base)
+{
+	int i;
+	struct gpio_chip *gc = &chip->chip;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		/* skip banks not present on SoC */
+		if (chip->chip.base >= S3C_GPIO_END)
+			continue;
+
+		if (!chip->config)
+			chip->config = &s3c24xx_gpiocfg_default;
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x10);
+
+		if (!gc->direction_input)
+			gc->direction_input = samsung_gpiolib_2bit_input;
+		if (!gc->direction_output)
+			gc->direction_output = samsung_gpiolib_2bit_output;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base,
+						  unsigned int offset)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_2bit_input;
+		chip->chip.direction_output = samsung_gpiolib_2bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[7];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_2bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * offset);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+/*
+ * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config.
+ * @chip: The gpio chip that is being configured.
+ * @nr_chips: The no of chips (gpio ports) for the GPIO being configured.
+ *
+ * This helper deal with the GPIO cases where the control register has 4 bits
+ * of control per GPIO, generally in the form of:
+ * 0000 = Input
+ * 0001 = Output
+ * others = Special functions (dependent on bank)
+ *
+ * Note, since the code to deal with the case where there are two control
+ * registers instead of one, we do not have a separate set of function
+ * (samsung_gpiolib_add_4bit2_chips)for each case.
+ */
+
+static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip,
+						  int nr_chips, void __iomem *base)
+{
+	int i;
+
+	for (i = 0 ; i < nr_chips; i++, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+		if ((base != NULL) && (chip->base == NULL))
+			chip->base = base + ((i) * 0x20);
+
+		chip->bitmap_gpio_int = 0;
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip,
+						   int nr_chips)
+{
+	for (; nr_chips > 0; nr_chips--, chip++) {
+		chip->chip.direction_input = samsung_gpiolib_4bit2_input;
+		chip->chip.direction_output = samsung_gpiolib_4bit2_output;
+
+		if (!chip->config)
+			chip->config = &samsung_gpio_cfgs[2];
+		if (!chip->pm)
+			chip->pm = __gpio_pm(&samsung_gpio_pm_4bit);
+
+		samsung_gpiolib_add(chip);
+	}
+}
+
+int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip);
+
+	return samsung_chip->irq_base + offset;
+}
+
+#ifdef CONFIG_PLAT_S3C24XX
+static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	if (offset < 4) {
+		if (soc_is_s3c2412())
+			return IRQ_EINT0_2412 + offset;
+		else
+			return IRQ_EINT0 + offset;
+	}
+
+	if (offset < 8)
+		return IRQ_EINT4 + offset - 4;
+
+	return -EINVAL;
+}
+#endif
+
+#ifdef CONFIG_ARCH_S3C64XX
+static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
+static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+#endif
+
+struct samsung_gpio_chip s3c24xx_gpios[] = {
+#ifdef CONFIG_PLAT_S3C24XX
+	{
+		.config	= &s3c24xx_gpiocfg_banka,
+		.chip	= {
+			.base			= S3C2410_GPA(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOA",
+			.ngpio			= 27,
+			.direction_input	= s3c24xx_gpiolib_banka_input,
+			.direction_output	= s3c24xx_gpiolib_banka_output,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPB(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOB",
+			.ngpio	= 11,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPC(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOC",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPD(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOD",
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPE(0),
+			.label	= "GPIOE",
+			.owner	= THIS_MODULE,
+			.ngpio	= 16,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPF(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOF",
+			.ngpio	= 8,
+			.to_irq	= s3c24xx_gpiolib_fbank_to_irq,
+		},
+	}, {
+		.irq_base = IRQ_EINT8,
+		.chip	= {
+			.base	= S3C2410_GPG(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOG",
+			.ngpio	= 16,
+			.to_irq	= samsung_gpiolib_to_irq,
+		},
+	}, {
+		.chip	= {
+			.base	= S3C2410_GPH(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOH",
+			.ngpio	= 15,
+		},
+	},
+		/* GPIOS for the S3C2443 and later devices. */
+	{
+		.base	= S3C2440_GPJCON,
+		.chip	= {
+			.base	= S3C2410_GPJ(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOJ",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPKCON,
+		.chip	= {
+			.base	= S3C2410_GPK(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOK",
+			.ngpio	= 16,
+		},
+	}, {
+		.base	= S3C2443_GPLCON,
+		.chip	= {
+			.base	= S3C2410_GPL(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOL",
+			.ngpio	= 15,
+		},
+	}, {
+		.base	= S3C2443_GPMCON,
+		.chip	= {
+			.base	= S3C2410_GPM(0),
+			.owner	= THIS_MODULE,
+			.label	= "GPIOM",
+			.ngpio	= 2,
+		},
+	},
+#endif
+};
+
+/*
+ * GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	SlpCon	ExtInt Group
+ * A	8	4Bit	Yes	1
+ * B	7	4Bit	Yes	1
+ * C	8	4Bit	Yes	2
+ * D	5	4Bit	Yes	3
+ * E	5	4Bit	Yes	None
+ * F	16	2Bit	Yes	4 [1]
+ * G	7	4Bit	Yes	5
+ * H	10	4Bit[2]	Yes	6
+ * I	16	2Bit	Yes	None
+ * J	12	2Bit	Yes	None
+ * K	16	4Bit[2]	No	None
+ * L	15	4Bit[2] No	None
+ * M	6	4Bit	No	IRQ_EINT
+ * N	16	2Bit	No	IRQ_EINT
+ * O	16	2Bit	Yes	7
+ * P	15	2Bit	Yes	8
+ * Q	9	2Bit	Yes	9
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.chip	= {
+			.base	= S3C64XX_GPA(0),
+			.ngpio	= S3C64XX_GPIO_A_NR,
+			.label	= "GPA",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPB(0),
+			.ngpio	= S3C64XX_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPC(0),
+			.ngpio	= S3C64XX_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.chip	= {
+			.base	= S3C64XX_GPD(0),
+			.ngpio	= S3C64XX_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPE(0),
+			.ngpio	= S3C64XX_GPIO_E_NR,
+			.label	= "GPE",
+		},
+	}, {
+		.base	= S3C64XX_GPG_BASE,
+		.chip	= {
+			.base	= S3C64XX_GPG(0),
+			.ngpio	= S3C64XX_GPIO_G_NR,
+			.label	= "GPG",
+		},
+	}, {
+		.base	= S3C64XX_GPM_BASE,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPM(0),
+			.ngpio	= S3C64XX_GPIO_M_NR,
+			.label	= "GPM",
+			.to_irq = s3c64xx_gpiolib_mbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.base	= S3C64XX_GPH_BASE + 0x4,
+		.chip	= {
+			.base	= S3C64XX_GPH(0),
+			.ngpio	= S3C64XX_GPIO_H_NR,
+			.label	= "GPH",
+		},
+	}, {
+		.base	= S3C64XX_GPK_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[0],
+		.chip	= {
+			.base	= S3C64XX_GPK(0),
+			.ngpio	= S3C64XX_GPIO_K_NR,
+			.label	= "GPK",
+		},
+	}, {
+		.base	= S3C64XX_GPL_BASE + 0x4,
+		.config	= &samsung_gpio_cfgs[1],
+		.chip	= {
+			.base	= S3C64XX_GPL(0),
+			.ngpio	= S3C64XX_GPIO_L_NR,
+			.label	= "GPL",
+			.to_irq = s3c64xx_gpiolib_lbank_to_irq,
+		},
+	},
+#endif
+};
+
+static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
+#ifdef CONFIG_ARCH_S3C64XX
+	{
+		.base	= S3C64XX_GPF_BASE,
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPF(0),
+			.ngpio	= S3C64XX_GPIO_F_NR,
+			.label	= "GPF",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPI(0),
+			.ngpio	= S3C64XX_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[7],
+		.chip	= {
+			.base	= S3C64XX_GPJ(0),
+			.ngpio	= S3C64XX_GPIO_J_NR,
+			.label	= "GPJ",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPO(0),
+			.ngpio	= S3C64XX_GPIO_O_NR,
+			.label	= "GPO",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPP(0),
+			.ngpio	= S3C64XX_GPIO_P_NR,
+			.label	= "GPP",
+		},
+	}, {
+		.config	= &samsung_gpio_cfgs[6],
+		.chip	= {
+			.base	= S3C64XX_GPQ(0),
+			.ngpio	= S3C64XX_GPIO_Q_NR,
+			.label	= "GPQ",
+		},
+	}, {
+		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
+		.config	= &samsung_gpio_cfgs[5],
+		.chip	= {
+			.base	= S3C64XX_GPN(0),
+			.ngpio	= S3C64XX_GPIO_N_NR,
+			.label	= "GPN",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	},
+#endif
+};
+
+/* TODO: cleanup soc_is_* */
+static __init int samsung_gpiolib_init(void)
+{
+	/*
+	 * Currently there are two drivers that can provide GPIO support for
+	 * Samsung SoCs. For device tree enabled platforms, the new
+	 * pinctrl-samsung driver is used, providing both GPIO and pin control
+	 * interfaces. For legacy (non-DT) platforms this driver is used.
+	 */
+	if (of_have_populated_dt())
+		return 0;
+
+	if (soc_is_s3c24xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
+		s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
+				ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
+	} else if (soc_is_s3c64xx()) {
+		samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+				ARRAY_SIZE(samsung_gpio_cfgs));
+		samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
+				ARRAY_SIZE(s3c64xx_gpios_2bit),
+				S3C64XX_VA_GPIO + 0xE0, 0x20);
+		samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit,
+				ARRAY_SIZE(s3c64xx_gpios_4bit),
+				S3C64XX_VA_GPIO);
+		samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
+				ARRAY_SIZE(s3c64xx_gpios_4bit2));
+	}
+
+	return 0;
+}
+core_initcall(samsung_gpiolib_init);
+
+int s3c_gpio_cfgpin(unsigned int pin, unsigned int config)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	int ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setcfg(chip, offset, config);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
+
+int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range);
+
+int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+			  unsigned int cfg, samsung_gpio_pull_t pull)
+{
+	int ret;
+
+	for (; nr > 0; nr--, start++) {
+		s3c_gpio_setpull(start, pull);
+		ret = s3c_gpio_cfgpin(start, cfg);
+		if (ret != 0)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range);
+
+unsigned s3c_gpio_getcfg(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	unsigned ret = 0;
+	int offset;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		ret = samsung_gpio_do_getcfg(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_getcfg);
+
+int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset, ret;
+
+	if (!chip)
+		return -EINVAL;
+
+	offset = pin - chip->chip.base;
+
+	samsung_gpio_lock(chip, flags);
+	ret = samsung_gpio_do_setpull(chip, offset, pull);
+	samsung_gpio_unlock(chip, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(s3c_gpio_setpull);
+
+samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin)
+{
+	struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
+	unsigned long flags;
+	int offset;
+	u32 pup = 0;
+
+	if (chip) {
+		offset = pin - chip->chip.base;
+
+		samsung_gpio_lock(chip, flags);
+		pup = samsung_gpio_do_getpull(chip, offset);
+		samsung_gpio_unlock(chip, flags);
+	}
+
+	return (__force samsung_gpio_pull_t)pup;
+}
+EXPORT_SYMBOL(s3c_gpio_getpull);
+
+#ifdef CONFIG_PLAT_S3C24XX
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+	unsigned long flags;
+	unsigned long misccr;
+
+	local_irq_save(flags);
+	misccr = __raw_readl(S3C24XX_MISCCR);
+	misccr &= ~clear;
+	misccr ^= change;
+	__raw_writel(misccr, S3C24XX_MISCCR);
+	local_irq_restore(flags);
+
+	return misccr;
+}
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+#endif
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
index c0c70a895ca8..6feedd47d875 100644
--- a/arch/arm/plat-samsung/include/plat/map-s3c.h
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -27,10 +27,6 @@
 #define S3C2410_PA_UART		(0x50000000)
 #define S3C24XX_PA_UART		S3C2410_PA_UART
 
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
 /*
  * GPIO ports
  *
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index f5cf2bd208e0..4ec9a7050185 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -23,7 +23,6 @@
 #define S5P_VA_COREPERI_BASE	S3C_ADDR(0x02800000)
 #define S5P_VA_COREPERI(x)	(S5P_VA_COREPERI_BASE + (x))
 #define S5P_VA_SCU		S5P_VA_COREPERI(0x0)
-#define S5P_VA_TWD		S5P_VA_COREPERI(0x600)
 
 #define VA_VIC(x)		(S3C_VA_IRQ + ((x) * 0x10000))
 #define VA_VIC0			VA_VIC(0)
@@ -31,10 +30,6 @@
 #define VA_VIC2			VA_VIC(2)
 #define VA_VIC3			VA_VIC(3)
 
-#ifndef S3C_UART_OFFSET
-#define S3C_UART_OFFSET		(0x400)
-#endif
-
 #include <plat/map-s3c.h>
 
 #endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 7f415ce74591..9dd562ab0841 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -41,14 +41,6 @@ static inline int s3c64xx_pm_init(void)
 extern unsigned long s3c_irqwake_intmask;
 extern unsigned long s3c_irqwake_eintmask;
 
-/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
-extern unsigned long s3c_irqwake_intallow;
-#ifdef CONFIG_PM_SLEEP
-extern unsigned long s3c_irqwake_eintallow;
-#else
-#define s3c_irqwake_eintallow 0
-#endif
-
 /* per-cpu sleep functions */
 
 extern void (*pm_cpu_prep)(void);
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 11fbbc26e49f..3776f7e752f0 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
 {
 	int ret;
 
+	/* init is only needed for ATAGS based platforms */
+	if (!IS_ENABLED(CONFIG_ATAGS) ||
+	    (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+		return 0;
+
 	// do the correct init for cpu
 
 	if (cpu == NULL) {
diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c
index 04aff2c31b46..70f2f699bed3 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/arch/arm/plat-samsung/pm-check.c
@@ -53,8 +53,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
 		if (ptr->child != NULL)
 			s3c_pm_run_res(ptr->child, fn, arg);
 
-		if ((ptr->flags & IORESOURCE_MEM) &&
-		    strcmp(ptr->name, "System RAM") == 0) {
+		if ((ptr->flags & IORESOURCE_SYSTEM_RAM)
+				== IORESOURCE_SYSTEM_RAM) {
 			S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
 				  (unsigned long)ptr->start,
 				  (unsigned long)ptr->end);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 82777c649774..d7803b434732 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -23,14 +23,10 @@
 #include <asm/cacheflush.h>
 #include <asm/suspend.h>
 
-#ifdef CONFIG_SAMSUNG_ATAGS
 #include <mach/map.h>
-#ifndef CONFIG_ARCH_EXYNOS
 #include <mach/regs-clock.h>
 #include <mach/regs-irq.h>
-#endif
 #include <mach/irqs.h>
-#endif
 
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig
index 49b8ef91584a..98b9b8e9f698 100644
--- a/arch/arm/plat-versatile/Kconfig
+++ b/arch/arm/plat-versatile/Kconfig
@@ -1,8 +1,5 @@
 if PLAT_VERSATILE
 
-config PLAT_VERSATILE_CLOCK
-	bool
-
 config PLAT_VERSATILE_SCHED_CLOCK
 	bool
 
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 03c4900ac3f4..bff3ba889882 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,5 +1,4 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
 
-obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o
 obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
diff --git a/arch/arm/plat-versatile/clock.c b/arch/arm/plat-versatile/clock.c
deleted file mode 100644
index 5c8b6564fdc2..000000000000
--- a/arch/arm/plat-versatile/clock.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- *  linux/arch/arm/plat-versatile/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/hardware/icst.h>
-
-#include <mach/clkdev.h>
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	long ret = -EIO;
-	if (clk->ops && clk->ops->round)
-		ret = clk->ops->round(clk, rate);
-	return ret;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-	if (clk->ops && clk->ops->set)
-		ret = clk->ops->set(clk, rate);
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-long icst_clk_round(struct clk *clk, unsigned long rate)
-{
-	struct icst_vco vco;
-	vco = icst_hz_to_vco(clk->params, rate);
-	return icst_hz(clk->params, vco);
-}
-EXPORT_SYMBOL(icst_clk_round);
-
-int icst_clk_set(struct clk *clk, unsigned long rate)
-{
-	struct icst_vco vco;
-
-	vco = icst_hz_to_vco(clk->params, rate);
-	clk->rate = icst_hz(clk->params, vco);
-	clk->ops->setvco(clk, vco);
-
-	return 0;
-}
-EXPORT_SYMBOL(icst_clk_set);
diff --git a/arch/arm/vdso/vdso.S b/arch/arm/vdso/vdso.S
index b2b97e3e7bab..a62a7b64f49c 100644
--- a/arch/arm/vdso/vdso.S
+++ b/arch/arm/vdso/vdso.S
@@ -23,9 +23,8 @@
 #include <linux/const.h>
 #include <asm/page.h>
 
-	__PAGE_ALIGNED_DATA
-
 	.globl vdso_start, vdso_end
+	.section .data..ro_after_init
 	.balign PAGE_SIZE
 vdso_start:
 	.incbin "arch/arm/vdso/vdso.so"
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index fc7ea529f462..75cd7345c654 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -12,6 +12,7 @@
 #include <xen/page.h>
 #include <xen/interface/sched.h>
 #include <xen/xen-ops.h>
+#include <asm/paravirt.h>
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
 #include <asm/system_misc.h>
@@ -25,6 +26,10 @@
 #include <linux/cpufreq.h>
 #include <linux/cpu.h>
 #include <linux/console.h>
+#include <linux/pvclock_gtod.h>
+#include <linux/time64.h>
+#include <linux/timekeeping.h>
+#include <linux/timekeeper_internal.h>
 
 #include <linux/mm.h>
 
@@ -79,6 +84,83 @@ int xen_unmap_domain_gfn_range(struct vm_area_struct *vma,
 }
 EXPORT_SYMBOL_GPL(xen_unmap_domain_gfn_range);
 
+static unsigned long long xen_stolen_accounting(int cpu)
+{
+	struct vcpu_runstate_info state;
+
+	BUG_ON(cpu != smp_processor_id());
+
+	xen_get_runstate_snapshot(&state);
+
+	WARN_ON(state.state != RUNSTATE_running);
+
+	return state.time[RUNSTATE_runnable] + state.time[RUNSTATE_offline];
+}
+
+static void xen_read_wallclock(struct timespec64 *ts)
+{
+	u32 version;
+	struct timespec64 now, ts_monotonic;
+	struct shared_info *s = HYPERVISOR_shared_info;
+	struct pvclock_wall_clock *wall_clock = &(s->wc);
+
+	/* get wallclock at system boot */
+	do {
+		version = wall_clock->version;
+		rmb();		/* fetch version before time */
+		now.tv_sec  = ((uint64_t)wall_clock->sec_hi << 32) | wall_clock->sec;
+		now.tv_nsec = wall_clock->nsec;
+		rmb();		/* fetch time before checking version */
+	} while ((wall_clock->version & 1) || (version != wall_clock->version));
+
+	/* time since system boot */
+	ktime_get_ts64(&ts_monotonic);
+	*ts = timespec64_add(now, ts_monotonic);
+}
+
+static int xen_pvclock_gtod_notify(struct notifier_block *nb,
+				   unsigned long was_set, void *priv)
+{
+	/* Protected by the calling core code serialization */
+	static struct timespec64 next_sync;
+
+	struct xen_platform_op op;
+	struct timespec64 now, system_time;
+	struct timekeeper *tk = priv;
+
+	now.tv_sec = tk->xtime_sec;
+	now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
+	system_time = timespec64_add(now, tk->wall_to_monotonic);
+
+	/*
+	 * We only take the expensive HV call when the clock was set
+	 * or when the 11 minutes RTC synchronization time elapsed.
+	 */
+	if (!was_set && timespec64_compare(&now, &next_sync) < 0)
+		return NOTIFY_OK;
+
+	op.cmd = XENPF_settime64;
+	op.u.settime64.mbz = 0;
+	op.u.settime64.secs = now.tv_sec;
+	op.u.settime64.nsecs = now.tv_nsec;
+	op.u.settime64.system_time = timespec64_to_ns(&system_time);
+	(void)HYPERVISOR_platform_op(&op);
+
+	/*
+	 * Move the next drift compensation time 11 minutes
+	 * ahead. That's emulating the sync_cmos_clock() update for
+	 * the hardware RTC.
+	 */
+	next_sync = now;
+	next_sync.tv_sec += 11 * 60;
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block xen_pvclock_gtod_notifier = {
+	.notifier_call = xen_pvclock_gtod_notify,
+};
+
 static void xen_percpu_init(void)
 {
 	struct vcpu_register_vcpu_info info;
@@ -104,6 +186,8 @@ static void xen_percpu_init(void)
 	BUG_ON(err);
 	per_cpu(xen_vcpu, cpu) = vcpup;
 
+	xen_setup_runstate_info(cpu);
+
 after_register_vcpu_info:
 	enable_percpu_irq(xen_events_irq, 0);
 	put_cpu();
@@ -271,6 +355,11 @@ static int __init xen_guest_init(void)
 
 	register_cpu_notifier(&xen_cpu_notifier);
 
+	pv_time_ops.steal_clock = xen_stolen_accounting;
+	static_key_slow_inc(&paravirt_steal_enabled);
+	if (xen_initial_domain())
+		pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
+
 	return 0;
 }
 early_initcall(xen_guest_init);
@@ -282,6 +371,11 @@ static int __init xen_pm_init(void)
 
 	pm_power_off = xen_power_off;
 	arm_pm_restart = xen_restart;
+	if (!xen_initial_domain()) {
+		struct timespec64 ts;
+		xen_read_wallclock(&ts);
+		do_settimeofday64(&ts);
+	}
 
 	return 0;
 }
@@ -307,5 +401,6 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op);
 EXPORT_SYMBOL_GPL(HYPERVISOR_multicall);
 EXPORT_SYMBOL_GPL(privcmd_call);
diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S
index 10fd99c568c6..9a36f4f49c10 100644
--- a/arch/arm/xen/hypercall.S
+++ b/arch/arm/xen/hypercall.S
@@ -89,6 +89,7 @@ HYPERCALL2(memory_op);
 HYPERCALL2(physdev_op);
 HYPERCALL3(vcpu_op);
 HYPERCALL1(tmem_op);
+HYPERCALL1(platform_op_raw);
 HYPERCALL2(multicall);
 
 ENTRY(privcmd_call)
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index 7c34f7126b04..c5f9a9e3d1f3 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -25,7 +25,7 @@
 unsigned long xen_get_swiotlb_free_pages(unsigned int order)
 {
 	struct memblock_region *reg;
-	gfp_t flags = __GFP_NOWARN;
+	gfp_t flags = __GFP_NOWARN|__GFP_KSWAPD_RECLAIM;
 
 	for_each_memblock(memory, reg) {
 		if (reg->base < (phys_addr_t)0xffffffff) {
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 851fe11c6069..4f436220384f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -3,6 +3,7 @@ config ARM64
 	select ACPI_CCA_REQUIRED if ACPI
 	select ACPI_GENERIC_GSI if ACPI
 	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL
@@ -13,6 +14,7 @@ config ARM64
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select ARCH_WANT_FRAME_POINTERS
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
@@ -27,6 +29,7 @@ config ARM64
 	select CPU_PM if (SUSPEND || CPU_IDLE)
 	select DCACHE_WORD_ACCESS
 	select EDAC_SUPPORT
+	select FRAME_POINTER
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST
@@ -47,9 +50,12 @@ config ARM64
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
+	select HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP
+	select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_MMAP_RND_BITS
+	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT
@@ -60,7 +66,6 @@ config ARM64
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
@@ -69,6 +74,7 @@ config ARM64
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_MEMBLOCK
 	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
@@ -91,6 +97,7 @@ config ARM64
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_CONTEXT_TRACKING
+	select HAVE_ARM_SMCCC
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
@@ -103,6 +110,33 @@ config ARCH_PHYS_ADDR_T_64BIT
 config MMU
 	def_bool y
 
+config ARCH_MMAP_RND_BITS_MIN
+       default 14 if ARM64_64K_PAGES
+       default 16 if ARM64_16K_PAGES
+       default 18
+
+# max bits determined by the following formula:
+#  VA_BITS - PAGE_SHIFT - 3
+config ARCH_MMAP_RND_BITS_MAX
+       default 19 if ARM64_VA_BITS=36
+       default 24 if ARM64_VA_BITS=39
+       default 27 if ARM64_VA_BITS=42
+       default 30 if ARM64_VA_BITS=47
+       default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
+       default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
+       default 33 if ARM64_VA_BITS=48
+       default 14 if ARM64_64K_PAGES
+       default 16 if ARM64_16K_PAGES
+       default 18
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+       default 7 if ARM64_64K_PAGES
+       default 9 if ARM64_16K_PAGES
+       default 11
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+       default 16
+
 config NO_IOPORT_MAP
 	def_bool y if !PCI
 
@@ -203,8 +237,6 @@ config PCI_SYSCALL
 	def_bool PCI
 
 source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
 
 endmenu
 
@@ -315,6 +347,27 @@ config ARM64_ERRATUM_832075
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_834220
+	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+	depends on KVM
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 834220 on Cortex-A57 parts up to r1p2.
+
+	  Affected Cortex-A57 parts might report a Stage 2 translation
+	  fault as the result of a Stage 1 fault for load crossing a
+	  page boundary when there is a permission or device memory
+	  alignment fault at Stage 1 and a translation fault at Stage 2.
+
+	  The workaround is to verify that the Stage 1 translation
+	  doesn't generate a fault before handling the Stage 2 fault.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_845719
 	bool "Cortex-A53: 845719: a load might read incorrect data"
 	depends on COMPAT
@@ -340,6 +393,7 @@ config ARM64_ERRATUM_843419
 	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
 	depends on MODULES
 	default y
+	select ARM64_MODULE_CMODEL_LARGE
 	help
 	  This option builds kernel modules using the large memory model in
 	  order to avoid the use of the ADRP instruction, which can cause
@@ -379,6 +433,17 @@ config CAVIUM_ERRATUM_23154
 
 	  If unsure, say Y.
 
+config CAVIUM_ERRATUM_27456
+	bool "Cavium erratum 27456: Broadcast TLBI instructions may cause icache corruption"
+	default y
+	help
+	  On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
+	  instructions may cause the icache to become corrupted if it
+	  contains data for a non-current ASID.  The fix is to
+	  invalidate the icache when changing the mm context.
+
+	  If unsure, say Y.
+
 endmenu
 
 
@@ -484,6 +549,9 @@ config HOTPLUG_CPU
 source kernel/Kconfig.preempt
 source kernel/Kconfig.hz
 
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	def_bool y
+
 config ARCH_HAS_HOLES_MEMORYMODEL
 	def_bool y if SPARSEMEM
 
@@ -507,9 +575,6 @@ config HW_PERF_EVENTS
 config SYS_SUPPORTS_HUGETLBFS
 	def_bool y
 
-config ARCH_WANT_GENERAL_HUGETLB
-	def_bool y
-
 config ARCH_WANT_HUGE_PMD_SHARE
 	def_bool y if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
 
@@ -534,6 +599,25 @@ config SECCOMP
 	  and the task is only allowed to execute a few safe syscalls
 	  defined by each seccomp mode.
 
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	default n
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
 config XEN_DOM0
 	def_bool y
 	depends on XEN
@@ -542,6 +626,7 @@ config XEN
 	bool "Xen guest support on ARM64"
 	depends on ARM64 && OF
 	select SWIOTLB_XEN
+	select PARAVIRT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
 
@@ -680,12 +765,112 @@ config ARM64_LSE_ATOMICS
 	  not support these instructions and requires the kernel to be
 	  built with binutils >= 2.25.
 
+config ARM64_VHE
+	bool "Enable support for Virtualization Host Extensions (VHE)"
+	default y
+	help
+	  Virtualization Host Extensions (VHE) allow the kernel to run
+	  directly at EL2 (instead of EL1) on processors that support
+	  it. This leads to better performance for KVM, as they reduce
+	  the cost of the world switch.
+
+	  Selecting this option allows the VHE feature to be detected
+	  at runtime, and does not affect processors that do not
+	  implement this feature.
+
+endmenu
+
+menu "ARMv8.2 architectural features"
+
+config ARM64_UAO
+	bool "Enable support for User Access Override (UAO)"
+	default y
+	help
+	  User Access Override (UAO; part of the ARMv8.2 Extensions)
+	  causes the 'unprivileged' variant of the load/store instructions to
+	  be overriden to be privileged.
+
+	  This option changes get_user() and friends to use the 'unprivileged'
+	  variant of the load/store instructions. This ensures that user-space
+	  really did have access to the supplied memory. When addr_limit is
+	  set to kernel memory the UAO bit will be set, allowing privileged
+	  access to kernel memory.
+
+	  Choosing this option will cause copy_to_user() et al to use user-space
+	  memory permissions.
+
+	  The feature is detected at runtime, the kernel will use the
+	  regular load/store instructions if the cpu does not implement the
+	  feature.
+
 endmenu
 
+config ARM64_MODULE_CMODEL_LARGE
+	bool
+
+config ARM64_MODULE_PLTS
+	bool
+	select ARM64_MODULE_CMODEL_LARGE
+	select HAVE_MOD_ARCH_SPECIFIC
+
+config RELOCATABLE
+	bool
+	help
+	  This builds the kernel as a Position Independent Executable (PIE),
+	  which retains all relocation metadata required to relocate the
+	  kernel binary at runtime to a different virtual address than the
+	  address it was linked at.
+	  Since AArch64 uses the RELA relocation format, this requires a
+	  relocation pass at runtime even if the kernel is loaded at the
+	  same address it was linked at.
+
+config RANDOMIZE_BASE
+	bool "Randomize the address of the kernel image"
+	select ARM64_MODULE_PLTS
+	select RELOCATABLE
+	help
+	  Randomizes the virtual address at which the kernel image is
+	  loaded, as a security feature that deters exploit attempts
+	  relying on knowledge of the location of kernel internals.
+
+	  It is the bootloader's job to provide entropy, by passing a
+	  random u64 value in /chosen/kaslr-seed at kernel entry.
+
+	  When booting via the UEFI stub, it will invoke the firmware's
+	  EFI_RNG_PROTOCOL implementation (if available) to supply entropy
+	  to the kernel proper. In addition, it will randomise the physical
+	  location of the kernel Image as well.
+
+	  If unsure, say N.
+
+config RANDOMIZE_MODULE_REGION_FULL
+	bool "Randomize the module region independently from the core kernel"
+	depends on RANDOMIZE_BASE
+	default y
+	help
+	  Randomizes the location of the module region without considering the
+	  location of the core kernel. This way, it is impossible for modules
+	  to leak information about the location of core kernel data structures
+	  but it does imply that function calls between modules and the core
+	  kernel will need to be resolved via veneers in the module PLT.
+
+	  When this option is not set, the module region will be randomized over
+	  a limited range that contains the [_stext, _etext] interval of the
+	  core kernel, so branch relocations are always in range.
+
 endmenu
 
 menu "Boot options"
 
+config ARM64_ACPI_PARKING_PROTOCOL
+	bool "Enable support for the ARM64 ACPI parking protocol"
+	depends on ACPI
+	help
+	  Enable support for the ARM64 ACPI parking protocol. If disabled
+	  the kernel will not allow booting through the ARM64 ACPI parking
+	  protocol even if the corresponding data is present in the ACPI
+	  MADT table.
+
 config CMDLINE
 	string "Default kernel command string"
 	default ""
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index c24d6adc0420..7e76845a0434 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -2,10 +2,6 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config FRAME_POINTER
-	bool
-	default y
-
 config ARM64_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
@@ -18,20 +14,6 @@ config ARM64_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	help
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-	  If in doubt, say Y.
-
 config PID_IN_CONTEXTIDR
 	bool "Write the current PID to the CONTEXTIDR register"
 	help
@@ -68,13 +50,13 @@ config DEBUG_SET_MODULE_RONX
 
 config DEBUG_RODATA
 	bool "Make kernel text and rodata read-only"
+	default y
 	help
 	  If this is set, kernel text and rodata will be made read-only. This
 	  is to help catch accidental or malicious attempts to change the
-	  kernel's executable code. Additionally splits rodata from kernel
-	  text so it can be made explicitly non-executable.
+	  kernel's executable code.
 
-          If in doubt, say Y
+	  If in doubt, say Y
 
 config DEBUG_ALIGN_RODATA
 	depends on DEBUG_RODATA && ARM64_4K_PAGES
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 23800a19a7bc..efa77c146415 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -1,40 +1,51 @@
 menu "Platform selection"
 
+config ARCH_SUNXI
+	bool "Allwinner sunxi 64-bit SoC Family"
+	help
+	  This enables support for Allwinner sunxi based SoCs like the A64.
+
+config ARCH_ALPINE
+	bool "Annapurna Labs Alpine platform"
+	select ALPINE_MSI
+	help
+	  This enables support for the Annapurna Labs Alpine
+	  Soc family.
+
 config ARCH_BCM_IPROC
 	bool "Broadcom iProc SoC Family"
+	select COMMON_CLK_IPROC
+	select PINCTRL
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for Broadcom iProc based SoCs
 
 config ARCH_BERLIN
 	bool "Marvell Berlin SoC Family"
+	select ARCH_REQUIRE_GPIOLIB
 	select DW_APB_ICTL
+	select PINCTRL
 	help
 	  This enables support for Marvell Berlin SoC Family
 
 config ARCH_EXYNOS
-	bool
-	help
-	  This enables support for Samsung Exynos SoC family
-
-config ARCH_EXYNOS7
-	bool "ARMv8 based Samsung Exynos7"
-	select ARCH_EXYNOS
+	bool "ARMv8 based Samsung Exynos SoC family"
 	select COMMON_CLK_SAMSUNG
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select PINCTRL
 	select PINCTRL_EXYNOS
-
 	help
-	  This enables support for Samsung Exynos7 SoC family
+	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
-config ARCH_FSL_LS2085A
-	bool "Freescale LS2085A SOC"
+config ARCH_LAYERSCAPE
+	bool "ARMv8 based Freescale Layerscape SoC family"
 	help
-	  This enables support for Freescale LS2085A SOC.
+	  This enables support for the Freescale Layerscape SoC family.
 
 config ARCH_HISI
 	bool "Hisilicon SoC Family"
+	select HISILICON_IRQ_MBIGEN
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
@@ -42,9 +53,26 @@ config ARCH_MEDIATEK
 	bool "Mediatek MT65xx & MT81xx ARMv8 SoC"
 	select ARM_GIC
 	select PINCTRL
+	select MTK_TIMER
 	help
 	  Support for Mediatek MT65xx & MT81xx ARMv8 SoCs
 
+config ARCH_MESON
+	bool "Amlogic Platforms"
+	help
+	  This enables support for the Amlogic S905 SoCs.
+
+config ARCH_MVEBU
+	bool "Marvell EBU SoC Family"
+	select ARMADA_AP806_CORE_CLK
+	select ARMADA_AP806_RING_CLK
+	select MVEBU_ODMI
+	help
+	  This enables support for Marvell EBU familly, including:
+	   - Armada 3700 SoC Family
+	   - Armada 7K SoC Family
+	   - Armada 8K SoC Family
+
 config ARCH_QCOM
 	bool "Qualcomm Platforms"
 	select PINCTRL
@@ -57,6 +85,7 @@ config ARCH_ROCKCHIP
 	select ARCH_REQUIRE_GPIOLIB
 	select PINCTRL
 	select PINCTRL_ROCKCHIP
+	select ROCKCHIP_TIMER
 	help
 	  This enables support for the ARMv8 based Rockchip chipsets,
 	  like the RK3368.
@@ -66,6 +95,30 @@ config ARCH_SEATTLE
 	help
 	  This enables support for AMD Seattle SOC Family
 
+config ARCH_SHMOBILE
+	bool
+
+config ARCH_RENESAS
+	bool "Renesas SoC Platforms"
+	select ARCH_SHMOBILE
+	select PINCTRL
+	select PM
+	select PM_GENERIC_DOMAINS
+	select RENESAS_IRQC
+	help
+	  This enables support for the ARMv8 based Renesas SoCs.
+
+config ARCH_R8A7795
+	bool "Renesas R-Car H3 SoC Platform"
+	depends on ARCH_RENESAS
+	help
+	  This enables support for the Renesas R-Car H3 SoC.
+
+config ARCH_STRATIX10
+	bool "Altera's Stratix 10 SoCFPGA Family"
+	help
+	  This enables support for Altera's Stratix 10 SoCFPGA Family.
+
 config ARCH_TEGRA
 	bool "NVIDIA Tegra SoC Family"
 	select ARCH_HAS_RESET_CONTROLLER
@@ -80,18 +133,6 @@ config ARCH_TEGRA
 	help
 	  This enables support for the NVIDIA Tegra SoC family.
 
-config ARCH_TEGRA_132_SOC
-	bool "NVIDIA Tegra132 SoC"
-	depends on ARCH_TEGRA
-	select PINCTRL_TEGRA124
-	select USB_ULPI if USB_PHY
-	select USB_ULPI_VIEWPORT if USB_PHY
-	help
-	  Enable support for NVIDIA Tegra132 SoC, based on the Denver
-	  ARMv8 CPU.  The Tegra132 SoC is similar to the Tegra124 SoC,
-	  but contains an NVIDIA Denver CPU complex in place of
-	  Tegra124's "4+1" Cortex-A15 CPU complex.
-
 config ARCH_SPRD
 	bool "Spreadtrum SoC platform"
 	help
@@ -102,6 +143,12 @@ config ARCH_THUNDER
 	help
 	  This enables support for Cavium's Thunder Family of SoCs.
 
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoC Family"
+	select PINCTRL
+	help
+	  This enables support for Socionext UniPhier SoC family.
+
 config ARCH_VEXPRESS
 	bool "ARMv8 software model (Versatile Express)"
 	select ARCH_REQUIRE_GPIOLIB
@@ -112,6 +159,11 @@ config ARCH_VEXPRESS
 	  This enables support for the ARMv8 software model (Versatile
 	  Express).
 
+config ARCH_VULCAN
+	bool "Broadcom Vulcan SOC Family"
+	help
+	  This enables support for Broadcom Vulcan SoC Family
+
 config ARCH_XGENE
 	bool "AppliedMicro X-Gene SOC Family"
 	help
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index cd822d8454c0..354d75402ace 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -15,6 +15,10 @@ CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
 OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment -S
 GZFLAGS		:=-9
 
+ifneq ($(CONFIG_RELOCATABLE),)
+LDFLAGS_vmlinux		+= -pie
+endif
+
 KBUILD_DEFCONFIG := defconfig
 
 # Check for binutils support for specific extensions
@@ -27,6 +31,8 @@ $(warning LSE atomics not supported by binutils)
 endif
 
 KBUILD_CFLAGS	+= -mgeneral-regs-only $(lseinstr)
+KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
+KBUILD_CFLAGS	+= $(call cc-option, -mpc-relative-literal-loads)
 KBUILD_AFLAGS	+= $(lseinstr)
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
@@ -41,10 +47,14 @@ endif
 
 CHECKFLAGS	+= -D__aarch64__
 
-ifeq ($(CONFIG_ARM64_ERRATUM_843419), y)
+ifeq ($(CONFIG_ARM64_MODULE_CMODEL_LARGE), y)
 KBUILD_CFLAGS_MODULE	+= -mcmodel=large
 endif
 
+ifeq ($(CONFIG_ARM64_MODULE_PLTS),y)
+KBUILD_LDFLAGS_MODULE	+= -T $(srctree)/arch/arm64/kernel/module.lds
+endif
+
 # Default value
 head-y		:= arch/arm64/kernel/head.o
 
@@ -86,7 +96,7 @@ Image: vmlinux
 Image.%: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-zinstall install: vmlinux
+zinstall install:
 	$(Q)$(MAKE) $(build)=$(boot) $@
 
 %.dtb: scripts
diff --git a/arch/arm64/boot/Makefile b/arch/arm64/boot/Makefile
index abcbba2f01ba..305c552b5ec1 100644
--- a/arch/arm64/boot/Makefile
+++ b/arch/arm64/boot/Makefile
@@ -34,10 +34,10 @@ $(obj)/Image.lzma: $(obj)/Image FORCE
 $(obj)/Image.lzo: $(obj)/Image FORCE
 	$(call if_changed,lzo)
 
-install: $(obj)/Image
+install:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-zinstall: $(obj)/Image.gz
+zinstall:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image.gz System.map "$(INSTALL_PATH)"
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index b01ec43d1ca9..330fae966cf3 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,4 +1,7 @@
+dts-dirs += al
+dts-dirs += altera
 dts-dirs += amd
+dts-dirs += amlogic
 dts-dirs += apm
 dts-dirs += arm
 dts-dirs += broadcom
@@ -8,8 +11,11 @@ dts-dirs += freescale
 dts-dirs += hisilicon
 dts-dirs += marvell
 dts-dirs += mediatek
+dts-dirs += nvidia
 dts-dirs += qcom
+dts-dirs += renesas
 dts-dirs += rockchip
+dts-dirs += socionext
 dts-dirs += sprd
 dts-dirs += xilinx
 
diff --git a/arch/arm64/boot/dts/al/Makefile b/arch/arm64/boot/dts/al/Makefile
new file mode 100644
index 000000000000..8a6cde4f9b23
--- /dev/null
+++ b/arch/arm64/boot/dts/al/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v2-evp.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/al/alpine-v2-evp.dts b/arch/arm64/boot/dts/al/alpine-v2-evp.dts
new file mode 100644
index 000000000000..a079d7b3063e
--- /dev/null
+++ b/arch/arm64/boot/dts/al/alpine-v2-evp.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "alpine-v2.dtsi"
+
+/ {
+	model = "Annapurna Labs Alpine v2 EVP";
+	compatible = "al,alpine-v2-evp", "al,alpine-v2";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/al/alpine-v2.dtsi b/arch/arm64/boot/dts/al/alpine-v2.dtsi
new file mode 100644
index 000000000000..5b7bef684256
--- /dev/null
+++ b/arch/arm64/boot/dts/al/alpine-v2.dtsi
@@ -0,0 +1,236 @@
+/*
+ * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Annapurna Labs Alpine v2";
+	compatible = "al,alpine-v2";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0x84000003>;
+	};
+
+	sbclk: sbclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		interrupt-parent = <&gic>;
+		ranges;
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		pmu {
+			compatible = "arm,armv8-pmuv3";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: gic@f0100000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0xf0200000 0x0 0x10000>,	/* GIC Dist */
+			      <0x0 0xf0280000 0x0 0x200000>,	/* GICR */
+			      <0x0 0xf0100000 0x0 0x2000>,	/* GICC */
+			      <0x0 0xf0110000 0x0 0x2000>,	/* GICV */
+			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		pci@fbc00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbc00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* add legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 53 4>,
+					<0x4800 0 0 1 &gic 0 54 4>;
+			/* 32 bit non prefetchable memory space */
+			ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <160>;
+			al,msi-num-spis = <160>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				device_type = "serial";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <500000000>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			timer0: timer@1890000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1890000 0x1000>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+			};
+
+			timer1: timer@1891000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1891000 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer2: timer@1892000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1892000 0x1000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+
+			timer3: timer@1893000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x1893000 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sbclk>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
new file mode 100644
index 000000000000..d7a641698d77
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
new file mode 100644
index 000000000000..445aa678f914
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -0,0 +1,358 @@
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "altr,socfpga-stratix10";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			device_type = "cpu";
+			enable-method = "psci";
+			reg = <0x3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 120 8>,
+			     <0 121 8>,
+			     <0 122 8>,
+			     <0 123 8>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	intc: intc@fffc1000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0xfffc1000 0x1000>,
+		      <0x0 0xfffc2000 0x2000>,
+		      <0x0 0xfffc4000 0x2000>,
+		      <0x0 0xfffc6000 0x2000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges = <0 0 0 0xffffffff>;
+
+		clkmgr@ffd1000 {
+			compatible = "altr,clk-mgr";
+			reg = <0xffd10000 0x1000>;
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 90 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff802000 0x2000>;
+			interrupts = <0 91 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 92 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc03200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03200 0x100>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 110 4>;
+			};
+		};
+
+		gpio1: gpio@ffc03300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc03300 0x100>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 110 4>;
+			};
+		};
+
+		i2c0: i2c@ffc02800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02800 0x100>;
+			interrupts = <0 103 4>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02900 0x100>;
+			interrupts = <0 104 4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02a00 0x100>;
+			interrupts = <0 105 4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02b00 0x100>;
+			interrupts = <0 106 4>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02c00 0x100>;
+			interrupts = <0 107 4>;
+			status = "disabled";
+		};
+
+		mmc: dwmmc0@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 96 4>;
+			fifo-depth = <0x400>;
+			status = "disabled";
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x100000>;
+		};
+
+		rst: rstmgr@ffd11000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd11000 0x1000>;
+		};
+
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x1000>;
+			interrupts = <0 101 4>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@ffda5000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda5000 0x1000>;
+			interrupts = <0 102 4>;
+			num-chipselect = <4>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd12000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd12000 0x1000>;
+		};
+
+		/* Local timer */
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xf01>,
+				     <1 14 0xf01>,
+				     <1 11 0xf01>,
+				     <1 10 0xf01>;
+		};
+
+		timer0: timer0@ffc03000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 113 4>;
+			reg = <0xffc03000 0x100>;
+		};
+
+		timer1: timer1@ffc03100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 114 4>;
+			reg = <0xffc03100 0x100>;
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 4>;
+			reg = <0xffd00000 0x100>;
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 4>;
+			reg = <0xffd00100 0x100>;
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 108 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial1@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 109 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		usbphy0: usbphy@0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0x40000>;
+			interrupts = <0 93 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0x40000>;
+			interrupts = <0 94 4>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 117 4>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 118 4>;
+			status = "disabled";
+		};
+
+		watchdog2: watchdog@ffd00400 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00400 0x100>;
+			interrupts = <0 125 4>;
+			status = "disabled";
+		};
+
+		watchdog3: watchdog@ffd00500 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00500 0x100>;
+			interrupts = <0 126 4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
new file mode 100644
index 000000000000..41ea2dba2fce
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -0,0 +1,39 @@
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_stratix10.dtsi"
+
+/ {
+	model = "SoCFPGA Stratix 10 SoCDK";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile
index cfdf701e05df..ba84770f789f 100644
--- a/arch/arm64/boot/dts/amd/Makefile
+++ b/arch/arm64/boot/dts/amd/Makefile
@@ -1,4 +1,6 @@
-dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb \
+			amd-overdrive-rev-b0.dtb amd-overdrive-rev-b1.dtb \
+			husky.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
new file mode 100644
index 000000000000..8e3074a4947d
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dts
@@ -0,0 +1,87 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B0) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
new file mode 100644
index 000000000000..ed5e043f37aa
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dts
@@ -0,0 +1,91 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ * Note: For Seattle Rev.B1
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle (Rev.B1) Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&sata1 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&ipmi_kcs {
+	status = "ok";
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
index 2874d92881fd..bd3adeac374f 100644
--- a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
+++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi
@@ -18,8 +18,8 @@
 		#size-cells = <2>;
 		reg = <0x0 0xe1110000 0 0x1000>,
 		      <0x0 0xe112f000 0 0x2000>,
-		      <0x0 0xe1140000 0 0x10000>,
-		      <0x0 0xe1160000 0 0x10000>;
+		      <0x0 0xe1140000 0 0x2000>,
+		      <0x0 0xe1160000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 		ranges = <0 0 0 0xe1100000 0 0x100000>;
 		v2m0: v2m@e0080000 {
@@ -55,25 +55,47 @@
 		#size-cells = <2>;
 		ranges;
 
-		/* DDR range is 40-bit addressing */
-		dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+		/*
+		 * dma-ranges is 40-bit address space containing:
+		 * - GICv2m MSI register is at 0xe0080000
+		 * - DRAM range [0x8000000000 to 0xffffffffff]
+		 */
+		dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
 		/include/ "amd-seattle-clks.dtsi"
 
 		sata0: sata@e0300000 {
 			compatible = "snps,dwc-ahci";
-			reg = <0 0xe0300000 0 0x800>;
+			reg = <0 0xe0300000 0 0xf0000>;
 			interrupts = <0 355 4>;
 			clocks = <&sataclk_333mhz>;
 			dma-coherent;
 		};
 
+		/* This is for Rev B only */
+		sata1: sata@e0d00000 {
+			status = "disabled";
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0d00000 0 0xf0000>;
+			interrupts = <0 354 4>;
+			clocks = <&sataclk_333mhz>;
+			dma-coherent;
+		};
+
 		i2c0: i2c@e1000000 {
 			status = "disabled";
 			compatible = "snps,designware-i2c";
 			reg = <0 0xe1000000 0 0x1000>;
 			interrupts = <0 357 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+		};
+
+		i2c1: i2c@e0050000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe0050000 0 0x1000>;
+			interrupts = <0 340 4>;
+			clocks = <&miscclk_250mhz>;
 		};
 
 		serial0: serial@e1010000 {
@@ -87,7 +109,6 @@
 		spi0: ssp@e1020000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1020000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 330 4>;
@@ -98,7 +119,6 @@
 		spi1: ssp@e1030000 {
 			status = "disabled";
 			compatible = "arm,pl022", "arm,primecell";
-			#gpio-cells = <2>;
 			reg = <0 0xe1030000 0 0x1000>;
 			spi-controller;
 			interrupts = <0 329 4>;
@@ -109,7 +129,7 @@
 			#size-cells = <0>;
 		};
 
-		gpio0: gpio@e1040000 {
+		gpio0: gpio@e1040000 { /* Not available to OS for B0 */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
@@ -118,18 +138,59 @@
 			interrupts = <0 359 4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
-		gpio1: gpio@e1050000 {
+		gpio1: gpio@e1050000 { /* [0:7] */
 			status = "disabled";
 			compatible = "arm,pl061", "arm,primecell";
 			#gpio-cells = <2>;
 			reg = <0 0xe1050000 0 0x1000>;
 			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <0 358 4>;
-			clocks = <&uartspiclk_100mhz>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e0020000 { /* [8:15] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0020000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 366 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e0030000 { /* [16:23] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0030000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 365 4>;
+			clocks = <&miscclk_250mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e0080000 { /* [24] */
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe0080000 0 0x1000>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 361 4>;
+			clocks = <&miscclk_250mhz>;
 			clock-names = "apb_pclk";
 		};
 
@@ -159,7 +220,7 @@
 				<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
 
 			dma-coherent;
-			dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+			dma-ranges = <0x43000000 0x0 0x0 0x0 0x0 0x100 0x0>;
 			ranges =
 				/* I/O Memory (size=64K) */
 				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
@@ -168,5 +229,22 @@
 				/* 64-bit MMIO (size= 124G) */
 				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
 		};
+
+		/* Perf CCN504 PMU */
+		ccn: ccn@e8000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0xe8000000 0 0x1000000>;
+			interrupts = <0 380 4>;
+		};
+
+		ipmi_kcs: kcs@e0010000 {
+			status = "disabled";
+			compatible = "ipmi-kcs";
+			device_type = "ipmi";
+			reg = <0x0 0xe0010000 0 0x8>;
+			interrupts = <0 389 4>;
+			reg-size = <1>;
+			reg-spacing = <4>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
new file mode 100644
index 000000000000..8e8631952497
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/amd-seattle-xgbe-b.dtsi
@@ -0,0 +1,117 @@
+/*
+ * DTS file for AMD Seattle XGBE (RevB)
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+	xgmacclk0_dma_250mhz: clk250mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_dma_250mhz";
+	};
+
+	xgmacclk0_ptp_250mhz: clk250mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk0_ptp_250mhz";
+	};
+
+	xgmacclk1_dma_250mhz: clk250mhz_2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_dma_250mhz";
+	};
+
+	xgmacclk1_ptp_250mhz: clk250mhz_3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "xgmacclk1_ptp_250mhz";
+	};
+
+	xgmac0: xgmac@e0700000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0700000 0 0x80000>,
+		      <0 0xe0780000 0 0x80000>,
+		      <0 0xe1240800 0 0x00400>, /* SERDES RX/TX0 */
+		      <0 0xe1250000 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500f8 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 325 4>,
+			     <0 346 1>, <0 347 1>, <0 348 1>, <0 349 1>,
+			     <0 323 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 A1 A2 A3 A4 A5 ];
+		clocks = <&xgmacclk0_dma_250mhz>, <&xgmacclk0_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac1: xgmac@e0900000 {
+		compatible = "amd,xgbe-seattle-v1a";
+		reg = <0 0xe0900000 0 0x80000>,
+		      <0 0xe0980000 0 0x80000>,
+		      <0 0xe1240c00 0 0x00400>, /* SERDES RX/TX1 */
+		      <0 0xe1250080 0 0x00060>, /* SERDES IR 1/2 */
+		      <0 0xe12500fc 0 0x00004>; /* SERDES IR 2/2 */
+		interrupts = <0 324 4>,
+			     <0 341 1>, <0 342 1>, <0 343 1>, <0 344 1>,
+			     <0 322 4>;
+		amd,per-channel-interrupt;
+		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <18>;
+		amd,serdes-tx-amp = <0>, <0>, <0>;
+		amd,serdes-dfe-tap-config = <3>, <3>, <3>;
+		amd,serdes-dfe-tap-enable = <0>, <0>, <7>;
+		mac-address = [ 02 B1 B2 B3 B4 B5 ];
+		clocks = <&xgmacclk1_dma_250mhz>, <&xgmacclk1_ptp_250mhz>;
+		clock-names = "dma_clk", "ptp_clk";
+		phy-mode = "xgmii";
+		#stream-id-cells = <16>;
+		dma-coherent;
+	};
+
+	xgmac0_smmu: smmu@e0600000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0600000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 336 4>,
+			      <0 336 4>;
+
+		 mmu-masters = <&xgmac0
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
+
+	 xgmac1_smmu: smmu@e0800000 {
+		 compatible = "arm,mmu-401";
+		 reg = <0 0xe0800000 0 0x10000>;
+		 #global-interrupts = <1>;
+		 interrupts = /* Uses combined intr for both
+			       * global and context
+			       */
+			      <0 335 4>,
+			      <0 335 4>;
+
+		 mmu-masters = <&xgmac1
+			  0  1  2  3  4  5  6  7
+			 16 17 18 19 20 21 22 23
+		 >;
+	 };
diff --git a/arch/arm64/boot/dts/amd/husky.dts b/arch/arm64/boot/dts/amd/husky.dts
new file mode 100644
index 000000000000..1381d4b2bf1b
--- /dev/null
+++ b/arch/arm64/boot/dts/amd/husky.dts
@@ -0,0 +1,83 @@
+/*
+ * DTS file for AMD/Linaro 96Boards Enterprise Edition Server (Husky) Board
+ * Note: Based-on AMD Seattle Rev.B0
+ *
+ * Copyright (C) 2015 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "Linaro 96Boards Enterprise Edition Server (Husky) Board";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+	};
+
+	psci {
+		compatible   = "arm,psci-0.2";
+		method       = "smc";
+	};
+};
+
+&ccp0 {
+	status = "ok";
+	amd,zlib-support = <1>;
+};
+
+/**
+ * NOTE: In Rev.B, gpio0 is reserved.
+ */
+&gpio1 {
+	status = "ok";
+};
+
+&gpio2 {
+	status = "ok";
+};
+
+&gpio3 {
+	status = "ok";
+};
+
+&gpio4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&smb0 {
+	/include/ "amd-seattle-xgbe-b.dtsi"
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
new file mode 100644
index 000000000000..eb672f38f89e
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -0,0 +1,7 @@
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
new file mode 100644
index 000000000000..399aff9e7975
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-meta", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Meta";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
new file mode 100644
index 000000000000..ac5a241b5ec2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-pro", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Pro";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
new file mode 100644
index 000000000000..fff7bfa2aa39
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-vega-s95.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95-telos", "tronsmart,vega-s95", "amlogic,meson-gxbb";
+	model = "Tronsmart Vega S95 Telos";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
new file mode 100644
index 000000000000..c1fa2667ec5c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "meson-gxbb.dtsi"
+
+/ {
+	compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
new file mode 100644
index 000000000000..eaa0a4553734
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "amlogic,meson-gxbb";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		cbus: cbus@c1100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc1100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+			uart_A: serial@84c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x084c0 0x0 0x14>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller@c4301000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xc4301000 0 0x1000>,
+			      <0x0 0xc4302000 0 0x2000>,
+			      <0x0 0xc4304000 0 0x2000>,
+			      <0x0 0xc4306000 0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+
+		aobus: aobus@c8100000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xc8100000 0x0 0x100000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+			uart_AO: serial@4c0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004c0 0x0 0x14>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+		};
+
+		apb: apb@d0000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xd0000000 0x0 0x200000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile
index a2afabbc1717..c75f17a49471 100644
--- a/arch/arm64/boot/dts/apm/Makefile
+++ b/arch/arm64/boot/dts/apm/Makefile
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts
new file mode 100644
index 000000000000..387c6a8d0da9
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-merlin.dts
@@ -0,0 +1,85 @@
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+	model = "APM X-Gene Merlin board";
+	compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		button@1 {
+			label = "POWER";
+			linux,code = <116>;
+			linux,input-type = <0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x0 0x1>;
+		};
+	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
+};
+
+&serial0 {
+	status = "ok";
+};
+
+&sata1 {
+	status = "ok";
+};
+
+&sata2 {
+	status = "ok";
+};
+
+&sata3 {
+	status = "ok";
+};
+
+&sgenet0 {
+	status = "ok";
+};
+
+&xgenet1 {
+	status = "ok";
+};
+
+&mmc0 {
+	status = "ok";
+};
+
+&i2c4 {
+	rtc68: rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+		status = "ok";
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts
index 4c55833d8a41..44db32ec5e9c 100644
--- a/arch/arm64/boot/dts/apm/apm-mustang.dts
+++ b/arch/arm64/boot/dts/apm/apm-mustang.dts
@@ -30,9 +30,22 @@
 			label = "POWER";
 			linux,code = <116>;
 			linux,input-type = <0x1>;
-			interrupts = <0x0 0x2d 0x1>;
+			interrupt-parent = <&sbgpio>;
+			interrupts = <0x5 0x1>;
 		};
 	};
+
+	poweroff_mbox: poweroff_mbox@10548000 {
+		compatible = "syscon";
+		reg = <0x0 0x10548000 0x0 0x30>;
+	};
+
+	poweroff: poweroff@10548010 {
+		compatible = "syscon-poweroff";
+		regmap = <&poweroff_mbox>;
+		offset = <0x10>;
+		mask = <0x1>;
+	};
 };
 
 &pcie0clk {
@@ -62,3 +75,7 @@
 &xgenet {
 	status = "ok";
 };
+
+&mmc0 {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
new file mode 100644
index 000000000000..a055a5d443b7
--- /dev/null
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -0,0 +1,691 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+	compatible = "apm,xgene-shadowcat";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,strega", "arm,armv8";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		xgene_L2_0: l2-cache-0 {
+			compatible = "cache";
+		};
+		xgene_L2_1: l2-cache-1 {
+			compatible = "cache";
+		};
+		xgene_L2_2: l2-cache-2 {
+			compatible = "cache";
+		};
+		xgene_L2_3: l2-cache-3 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@78090000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+		ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+		reg = <0x0 0x78090000 0x0 0x10000>,	/* GIC Dist */
+		      <0x0 0x780A0000 0x0 0x20000>,	/* GIC CPU */
+		      <0x0 0x780C0000 0x0 0x10000>,	/* GIC VCPU Control */
+		      <0x0 0x780E0000 0x0 0x20000>;	/* GIC VCPU */
+		v2m0: v2m@0x00000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x0 0x0 0x1000>;
+		};
+		v2m1: v2m@0x10000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x10000 0x0 0x1000>;
+		};
+		v2m2: v2m@0x20000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x20000 0x0 0x1000>;
+		};
+		v2m3: v2m@0x30000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x30000 0x0 0x1000>;
+		};
+		v2m4: v2m@0x40000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x40000 0x0 0x1000>;
+		};
+		v2m5: v2m@0x50000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x50000 0x0 0x1000>;
+		};
+		v2m6: v2m@0x60000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x60000 0x0 0x1000>;
+		};
+		v2m7: v2m@0x70000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x70000 0x0 0x1000>;
+		};
+		v2m8: v2m@0x80000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x80000 0x0 0x1000>;
+		};
+		v2m9: v2m@0x90000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x90000 0x0 0x1000>;
+		};
+		v2m10: v2m@0xA0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xA0000 0x0 0x1000>;
+		};
+		v2m11: v2m@0xB0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xB0000 0x0 0x1000>;
+		};
+		v2m12: v2m@0xC0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xC0000 0x0 0x1000>;
+		};
+		v2m13: v2m@0xD0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xD0000 0x0 0x1000>;
+		};
+		v2m14: v2m@0xE0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xE0000 0x0 0x1000>;
+		};
+		v2m15: v2m@0xF0000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0xF0000 0x0 0x1000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff04>,	/* Secure Phys IRQ */
+			     <1 13 0xff04>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff04>,	/* Virt IRQ */
+			     <1 15 0xff04>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-v2-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			ahbclk: ahbclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x164>;
+				divider-width = <0x5>;
+				divider-shift = <0x0>;
+				clock-output-names = "ahbclk";
+			};
+
+			sbapbclk: sbapbclk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ahbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x10>;
+				divider-width = <0x2>;
+				divider-shift = <0x0>;
+				clock-output-names = "sbapbclk";
+			};
+
+			sdioclk: sdioclk@1f2ac000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2ac000 0x0 0x1000
+					0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg", "div-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x2>;
+				enable-offset = <0x8>;
+				enable-mask = <0x2>;
+				divider-offset = <0x178>;
+				divider-width = <0x8>;
+				divider-shift = <0x0>;
+				clock-output-names = "sdioclk";
+			};
+
+			pcie0clk: pcie0clk@1f2bc000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2bc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie0clk";
+			};
+
+			pcie1clk: pcie1clk@1f2cc000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2cc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie1clk";
+			};
+
+			xge0clk: xge0clk@1f61c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f61c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge0clk";
+			};
+
+			xge1clk: xge1clk@1f62c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f62c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				enable-mask = <0x3>;
+				csr-mask = <0x3>;
+				clock-output-names = "xge1clk";
+			};
+
+			rngpkaclk: rngpkaclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x10>;
+				enable-offset = <0x10>;
+				enable-mask = <0x10>;
+				clock-output-names = "rngpkaclk";
+			};
+
+			i2c4clk: i2c4clk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&sbapbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x40>;
+				enable-offset = <0x8>;
+				enable-mask = <0x40>;
+				clock-output-names = "i2c4clk";
+			};
+		};
+
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
+		csw: csw@7e200000 {
+			compatible = "apm,xgene-csw", "syscon";
+			reg = <0x0 0x7e200000 0x0 0x1000>;
+		};
+
+		mcba: mcba@7e700000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e700000 0x0 0x1000>;
+		};
+
+		mcbb: mcbb@7e720000 {
+			compatible = "apm,xgene-mcb", "syscon";
+			reg = <0x0 0x7e720000 0x0 0x1000>;
+		};
+
+		efuse: efuse@1054a000 {
+			compatible = "apm,xgene-efuse", "syscon";
+			reg = <0x0 0x1054a000 0x0 0x20>;
+		};
+
+		edac@78800000 {
+			compatible = "apm,xgene-edac";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			regmap-csw = <&csw>;
+			regmap-mcba = <&mcba>;
+			regmap-mcbb = <&mcbb>;
+			regmap-efuse = <&efuse>;
+			reg = <0x0 0x78800000 0x0 0x100>;
+			interrupts = <0x0 0x20 0x4>,
+				     <0x0 0x21 0x4>,
+				     <0x0 0x27 0x4>;
+
+			edacmc@7e800000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e800000 0x0 0x1000>;
+				memory-controller = <0>;
+			};
+
+			edacmc@7e840000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e840000 0x0 0x1000>;
+				memory-controller = <1>;
+			};
+
+			edacmc@7e880000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e880000 0x0 0x1000>;
+				memory-controller = <2>;
+			};
+
+			edacmc@7e8c0000 {
+				compatible = "apm,xgene-edac-mc";
+				reg = <0x0 0x7e8c0000 0x0 0x1000>;
+				memory-controller = <3>;
+			};
+
+			edacpmd@7c000000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c000000 0x0 0x200000>;
+				pmd-controller = <0>;
+			};
+
+			edacpmd@7c200000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c200000 0x0 0x200000>;
+				pmd-controller = <1>;
+			};
+
+			edacpmd@7c400000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c400000 0x0 0x200000>;
+				pmd-controller = <2>;
+			};
+
+			edacpmd@7c600000 {
+				compatible = "apm,xgene-edac-pmd";
+				reg = <0x0 0x7c600000 0x0 0x200000>;
+				pmd-controller = <3>;
+			};
+
+			edacl3@7e600000 {
+				compatible = "apm,xgene-edac-l3-v2";
+				reg = <0x0 0x7e600000 0x0 0x1000>;
+			};
+
+			edacsoc@7e930000 {
+				compatible = "apm,xgene-edac-soc";
+				reg = <0x0 0x7e930000 0x0 0x1000>;
+			};
+		};
+
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0x8000>;
+			#mbox-cells = <1>;
+			interrupts =   <0x0 0x0 0x4
+					0x0 0x1 0x4
+					0x0 0x2 0x4
+					0x0 0x3 0x4
+					0x0 0x4 0x4
+					0x0 0x5 0x4
+					0x0 0x6 0x4
+					0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
+		serial0: serial@10600000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x10600000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		/* Do not change dwusb name, coded for backward compatibility */
+		usb0: dwusb@19000000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg =  <0x0 0x19000000 0x0 0x100000>;
+			interrupts = <0x0 0x5d 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		pcie0: pcie@1f2b0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+				0xc0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xc0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x20000000 0xc1 0x20000000 0x00 0x20000000   /* mem */
+				  0x43000000 0xe0 0x00000000 0xe0 0x00000000 0x20 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>;
+			dma-coherent;
+			clocks = <&pcie0clk 0>;
+			msi-parent = <&v2m0>;
+		};
+
+		pcie1: pcie@1f2c0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2c0000 0x0 0x00010000   /* Controller registers */
+				0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xa0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x20000000 0xa1 0x20000000 0x00 0x20000000   /* mem */
+				  0x43000000 0xb0 0x00000000 0xb0 0x00000000 0x10 0x00000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x1
+					 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x1
+					 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x1
+					 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x1>;
+			dma-coherent;
+			clocks = <&pcie1clk 0>;
+			msi-parent = <&v2m0>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f200000 0x0 0x1000>,
+			      <0x0 0x1f20d000 0x0 0x1000>,
+			      <0x0 0x1f20e000 0x0 0x1000>;
+			interrupts = <0x0 0x5a 0x4>;
+			dma-coherent;
+		};
+
+		sata2: sata@1a200000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a200000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>;
+			interrupts = <0x0 0x5b 0x4>;
+			dma-coherent;
+		};
+
+		sata3: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>;
+			interrupts = <0x0 0x5c 0x4>;
+			dma-coherent;
+		};
+
+		mmc0: mmc@1c000000 {
+			compatible = "arasan,sdhci-4.9a";
+			reg = <0x0 0x1c000000 0x0 0x100>;
+			interrupts = <0x0 0x49 0x4>;
+			dma-coherent;
+			no-1-8-v;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&sdioclk 0>, <&ahbclk 0>;
+		};
+
+		gfcgpio: gpio@1f63c000 {
+			compatible = "apm,xgene-gpio";
+			reg = <0x0 0x1f63c000 0x0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dwgpio: gpio@1c024000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x1c024000 0x0 0x1000>;
+			reg-io-width = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+		};
+
+		sbgpio: gpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <0x0 0x28 0x1>,
+				     <0x0 0x29 0x1>,
+				     <0x0 0x2a 0x1>,
+				     <0x0 0x2b 0x1>,
+				     <0x0 0x2c 0x1>,
+				     <0x0 0x2d 0x1>,
+				     <0x0 0x2e 0x1>,
+				     <0x0 0x2f 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			apm,nr-gpios = <22>;
+			apm,nr-irqs = <8>;
+			apm,irq-start = <8>;
+		};
+
+		sgenet0: ethernet@1f610000 {
+			compatible = "apm,xgene2-sgenet";
+			status = "disabled";
+			reg = <0x0 0x1f610000 0x0 0x10000>,
+			      <0x0 0x1f600000 0x0 0Xd100>,
+			      <0x0 0x20000000 0x0 0X20000>;
+			interrupts = <0 96 4>,
+				     <0 97 4>;
+			dma-coherent;
+			clocks = <&xge0clk 0>;
+			local-mac-address = [00 01 73 00 00 01];
+			phy-connection-type = "sgmii";
+		};
+
+		xgenet1: ethernet@1f620000 {
+			compatible = "apm,xgene2-xgenet";
+			status = "disabled";
+			reg = <0x0 0x1f620000 0x0 0x10000>,
+			      <0x0 0x1f600000 0x0 0Xd100>,
+			      <0x0 0x20000000 0x0 0X220000>;
+			interrupts = <0 108 4>,
+				     <0 109 4>,
+				     <0 110 4>,
+				     <0 111 4>,
+				     <0 112 4>,
+				     <0 113 4>,
+				     <0 114 4>,
+				     <0 115 4>;
+			port-id = <1>;
+			dma-coherent;
+			clocks = <&xge1clk 0>;
+			local-mac-address = [00 01 73 00 00 02];
+			phy-connection-type = "xgmii";
+		};
+
+		rng: rng@10520000 {
+			compatible = "apm,xgene-rng";
+			reg = <0x0 0x10520000 0x0 0x100>;
+			interrupts = <0x0 0x41 0x4>;
+			clocks = <&rngpkaclk 0>;
+		};
+
+		i2c1: i2c@10511000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10511000 0x0 0x1000>;
+			interrupts = <0 0x45 0x4>;
+			#clock-cells = <1>;
+			clocks = <&sbapbclk 0>;
+			bus_num = <1>;
+		};
+
+		i2c4: i2c@10640000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10640000 0x0 0x1000>;
+			interrupts = <0 0x3A 0x4>;
+			clocks = <&i2c4clk 0>;
+			bus_num = <4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index d6c9630a5c20..ae4a173df493 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -25,6 +25,7 @@
 			reg = <0x0 0x000>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
 		};
 		cpu@001 {
 			device_type = "cpu";
@@ -32,6 +33,7 @@
 			reg = <0x0 0x001>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_0>;
 		};
 		cpu@100 {
 			device_type = "cpu";
@@ -39,6 +41,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
 		};
 		cpu@101 {
 			device_type = "cpu";
@@ -46,6 +49,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_1>;
 		};
 		cpu@200 {
 			device_type = "cpu";
@@ -53,6 +57,7 @@
 			reg = <0x0 0x200>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
 		};
 		cpu@201 {
 			device_type = "cpu";
@@ -60,6 +65,7 @@
 			reg = <0x0 0x201>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_2>;
 		};
 		cpu@300 {
 			device_type = "cpu";
@@ -67,6 +73,7 @@
 			reg = <0x0 0x300>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
 		};
 		cpu@301 {
 			device_type = "cpu";
@@ -74,6 +81,19 @@
 			reg = <0x0 0x301>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
+			next-level-cache = <&xgene_L2_3>;
+		};
+		xgene_L2_0: l2-cache-0 {
+			compatible = "cache";
+		};
+		xgene_L2_1: l2-cache-1 {
+			compatible = "cache";
+		};
+		xgene_L2_2: l2-cache-2 {
+			compatible = "cache";
+		};
+		xgene_L2_3: l2-cache-3 {
+			compatible = "cache";
 		};
 	};
 
@@ -97,6 +117,11 @@
 		clock-frequency = <50000000>;
 	};
 
+	pmu {
+		compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+		interrupts = <1 12 0xff04>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -145,6 +170,35 @@
 				clock-output-names = "socplldiv2";
 			};
 
+			ahbclk: ahbclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x164>;
+				divider-width = <0x5>;
+				divider-shift = <0x0>;
+				clock-output-names = "ahbclk";
+			};
+
+			sdioclk: sdioclk@1f2ac000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2ac000 0x0 0x1000
+					0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg", "div-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x2>;
+				enable-offset = <0x8>;
+				enable-mask = <0x2>;
+				divider-offset = <0x178>;
+				divider-width = <0x8>;
+				divider-shift = <0x0>;
+				clock-output-names = "sdioclk";
+			};
+
 			qmlclk: qmlclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -407,6 +461,18 @@
 					0x0 0x1f 0x4>;
 		};
 
+		scu: system-clk-controller@17000000 {
+			compatible = "apm,xgene-scu","syscon";
+			reg = <0x0 0x17000000 0x0 0x400>;
+		};
+
+		reboot: reboot@17000014 {
+			compatible = "syscon-reboot";
+			regmap = <&scu>;
+			offset = <0x14>;
+			mask = <0x1>;
+		};
+
 		csw: csw@7e200000 {
 			compatible = "apm,xgene-csw", "syscon";
 			reg = <0x0 0x7e200000 0x0 0x1000>;
@@ -427,6 +493,11 @@
 			reg = <0x0 0x1054a000 0x0 0x20>;
 		};
 
+		rb: rb@7e000000 {
+			compatible = "apm,xgene-rb", "syscon";
+			reg = <0x0 0x7e000000 0x0 0x10>;
+		};
+
 		edac@78800000 {
 			compatible = "apm,xgene-edac";
 			#address-cells = <2>;
@@ -436,6 +507,7 @@
 			regmap-mcba = <&mcba>;
 			regmap-mcbb = <&mcbb>;
 			regmap-efuse = <&efuse>;
+			regmap-rb = <&rb>;
 			reg = <0x0 0x78800000 0x0 0x100>;
 			interrupts = <0x0 0x20 0x4>,
 				     <0x0 0x21 0x4>,
@@ -625,6 +697,25 @@
 			msi-parent = <&msi>;
 		};
 
+		mailbox: mailbox@10540000 {
+			compatible = "apm,xgene-slimpro-mbox";
+			reg = <0x0 0x10540000 0x0 0xa000>;
+			#mbox-cells = <1>;
+			interrupts =    <0x0 0x0 0x4>,
+					<0x0 0x1 0x4>,
+					<0x0 0x2 0x4>,
+					<0x0 0x3 0x4>,
+					<0x0 0x4 0x4>,
+					<0x0 0x5 0x4>,
+					<0x0 0x6 0x4>,
+					<0x0 0x7 0x4>;
+		};
+
+		i2cslimpro {
+			compatible = "apm,xgene-slimpro-i2c";
+			mboxes = <&mailbox 0>;
+		};
+
 		serial0: serial@1c020000 {
 			status = "disabled";
 			device_type = "serial";
@@ -669,6 +760,50 @@
 			interrupts = <0x0 0x4f 0x4>;
 		};
 
+		mmc0: mmc@1c000000 {
+			compatible = "arasan,sdhci-4.9a";
+			reg = <0x0 0x1c000000 0x0 0x100>;
+			interrupts = <0x0 0x49 0x4>;
+			dma-coherent;
+			no-1-8-v;
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&sdioclk 0>, <&ahbclk 0>;
+		};
+
+		gfcgpio: gpio0@1701c000 {
+			compatible = "apm,xgene-gpio";
+			reg = <0x0 0x1701c000 0x0 0x40>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		dwgpio: gpio@1c024000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x1c024000 0x0 0x1000>;
+			reg-io-width = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+			};
+		};
+
+		i2c0: i2c@10512000 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10512000 0x0 0x1000>;
+			interrupts = <0 0x44 0x4>;
+			#clock-cells = <1>;
+			clocks = <&ahbclk 0>;
+			bus_num = <0>;
+		};
+
 		phy1: phy@1f21a000 {
 			compatible = "apm,xgene-phy";
 			reg = <0x0 0x1f21a000 0x0 0x100>;
@@ -743,7 +878,26 @@
 			phy-names = "sata-phy";
 		};
 
-		sbgpio: sbgpio@17001000{
+		/* Do not change dwusb name, coded for backward compatibility */
+		usb0: dwusb@19000000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg =  <0x0 0x19000000 0x0 0x100000>;
+			interrupts = <0x0 0x89 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		usb1: dwusb@19800000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg =  <0x0 0x19800000 0x0 0x100000>;
+			interrupts = <0x0 0x8a 0x4>;
+			dma-coherent;
+			dr_mode = "host";
+		};
+
+		sbgpio: gpio@17001000{
 			compatible = "apm,xgene-gpio-sb";
 			reg = <0x0 0x17001000 0x0 0x400>;
 			#gpio-cells = <2>;
@@ -754,6 +908,9 @@
 					<0x0 0x2b 0x1>,
 					<0x0 0x2c 0x1>,
 					<0x0 0x2d 0x1>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
 		};
 
 		rtc: rtc@10510000 {
@@ -829,7 +986,13 @@
 			      <0x0 0x18000000 0x0 0X200>;
 			reg-names = "enet_csr", "ring_csr", "ring_cmd";
 			interrupts = <0x0 0x60 0x4>,
-				     <0x0 0x61 0x4>;
+				     <0x0 0x61 0x4>,
+				     <0x0 0x62 0x4>,
+				     <0x0 0x63 0x4>,
+				     <0x0 0x64 0x4>,
+				     <0x0 0x65 0x4>,
+				     <0x0 0x66 0x4>,
+				     <0x0 0x67 0x4>;
 			dma-coherent;
 			clocks = <&xge0clk 0>;
 			/* mac address will be overwritten by the bootloader */
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index bb3c07209676..75cc2aa10101 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,5 +1,5 @@
-dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
 
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
new file mode 100644
index 000000000000..35588dfa095c
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
@@ -0,0 +1,30 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3 configuration)
+ */
+
+#include "foundation-v8.dtsi"
+
+/ {
+	gic: interrupt-controller@2f000000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		reg =	<0x0 0x2f000000 0x0 0x10000>,
+			<0x0 0x2f100000 0x0 0x200000>,
+			<0x0 0x2c000000 0x0 0x2000>,
+			<0x0 0x2c010000 0x0 0x2000>,
+			<0x0 0x2c02f000 0x0 0x2000>;
+		interrupts = <1 9 4>;
+
+		its: its@2f020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x2f020000 0x0 0x20000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
index 4eac8dcea423..71168077312d 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -1,240 +1,21 @@
 /*
  * ARM Ltd.
  *
- * ARMv8 Foundation model DTS
+ * ARMv8 Foundation model DTS (GICv2 configuration)
  */
 
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
+#include "foundation-v8.dtsi"
 
 / {
-	model = "Foundation-v8A";
-	compatible = "arm,foundation-aarch64", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
-		      <0x00000008 0x80000000 0 0x80000000>;
-	};
-
 	gic: interrupt-controller@2c001000 {
 		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
-		#address-cells = <0>;
+		#address-cells = <2>;
 		interrupt-controller;
 		reg = <0x0 0x2c001000 0 0x1000>,
-		      <0x0 0x2c002000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x2000>,
 		      <0x0 0x2c004000 0 0x2000>,
 		      <0x0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		clock-frequency = <100000000>;
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-	};
-
-	smb {
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		arm,v2m-memory-map = "rs1";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-
-		ethernet@2,02000000 {
-			compatible = "smsc,lan91c111";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
-
-			v2m_sysreg: sysreg@010000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
-			};
-
-			v2m_serial0: uart@090000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			virtio_block@0130000 {
-				compatible = "virtio,mmio";
-				reg = <0x130000 0x200>;
-				interrupts = <42>;
-			};
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
new file mode 100644
index 000000000000..7cfa8e414e7f
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -0,0 +1,236 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	model = "Foundation-v8A";
+	compatible = "arm,foundation-aarch64", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	watchdog@2a440000 {
+		compatible = "arm,sbsa-gwdt";
+		reg = <0x0 0x2a440000 0 0x1000>,
+			<0x0 0x2a450000 0 0x1000>;
+		interrupts = <0 27 4>;
+		timeout-sec = <30>;
+	};
+
+	smb@08000000 {
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		arm,v2m-memory-map = "rs1";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0 0 0  0 4>,
+				<0 0  1 &gic 0 0 0  1 4>,
+				<0 0  2 &gic 0 0 0  2 4>,
+				<0 0  3 &gic 0 0 0  3 4>,
+				<0 0  4 &gic 0 0 0  4 4>,
+				<0 0  5 &gic 0 0 0  5 4>,
+				<0 0  6 &gic 0 0 0  6 4>,
+				<0 0  7 &gic 0 0 0  7 4>,
+				<0 0  8 &gic 0 0 0  8 4>,
+				<0 0  9 &gic 0 0 0  9 4>,
+				<0 0 10 &gic 0 0 0 10 4>,
+				<0 0 11 &gic 0 0 0 11 4>,
+				<0 0 12 &gic 0 0 0 12 4>,
+				<0 0 13 &gic 0 0 0 13 4>,
+				<0 0 14 &gic 0 0 0 14 4>,
+				<0 0 15 &gic 0 0 0 15 4>,
+				<0 0 16 &gic 0 0 0 16 4>,
+				<0 0 17 &gic 0 0 0 17 4>,
+				<0 0 18 &gic 0 0 0 18 4>,
+				<0 0 19 &gic 0 0 0 19 4>,
+				<0 0 20 &gic 0 0 0 20 4>,
+				<0 0 21 &gic 0 0 0 21 4>,
+				<0 0 22 &gic 0 0 0 22 4>,
+				<0 0 23 &gic 0 0 0 23 4>,
+				<0 0 24 &gic 0 0 0 24 4>,
+				<0 0 25 &gic 0 0 0 25 4>,
+				<0 0 26 &gic 0 0 0 26 4>,
+				<0 0 27 &gic 0 0 0 27 4>,
+				<0 0 28 &gic 0 0 0 28 4>,
+				<0 0 29 &gic 0 0 0 29 4>,
+				<0 0 30 &gic 0 0 0 30 4>,
+				<0 0 31 &gic 0 0 0 31 4>,
+				<0 0 32 &gic 0 0 0 32 4>,
+				<0 0 33 &gic 0 0 0 33 4>,
+				<0 0 34 &gic 0 0 0 34 4>,
+				<0 0 35 &gic 0 0 0 35 4>,
+				<0 0 36 &gic 0 0 0 36 4>,
+				<0 0 37 &gic 0 0 0 37 4>,
+				<0 0 38 &gic 0 0 0 38 4>,
+				<0 0 39 &gic 0 0 0 39 4>,
+				<0 0 40 &gic 0 0 0 40 4>,
+				<0 0 41 &gic 0 0 0 41 4>,
+				<0 0 42 &gic 0 0 0 42 4>;
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan91c111";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		iofpga@3,00000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			virtio_block@0130000 {
+				compatible = "virtio,mmio";
+				reg = <0x130000 0x200>;
+				interrupts = <42>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index e3ee96036eca..68ccc39a7a66 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -17,6 +17,18 @@
 		};
 	};
 
+	mailbox: mhu@2b1f0000 {
+		compatible = "arm,mhu", "arm,primecell";
+		reg = <0x0 0x2b1f0000 0x0 0x1000>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mhu_lpri_rx",
+				  "mhu_hpri_rx";
+		#mbox-cells = <1>;
+		clocks = <&soc_refclk100mhz>;
+		clock-names = "apb_pclk";
+	};
+
 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		reg = <0x0 0x2c010000 0 0x1000>,
@@ -44,6 +56,75 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	sram: sram@2e000000 {
+		compatible = "arm,juno-sram-ns", "mmio-sram";
+		reg = <0x0 0x2e000000 0x0 0x8000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x2e000000 0x8000>;
+
+		cpu_scp_lpri: scp-shmem@0 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x0 0x200>;
+		};
+
+		cpu_scp_hpri: scp-shmem@200 {
+			compatible = "arm,juno-scp-shmem";
+			reg = <0x200 0x200>;
+		};
+	};
+
+	pcie_ctlr: pcie-controller@40000000 {
+		compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+		device_type = "pci";
+		reg = <0 0x40000000 0 0x10000000>;	/* ECAM config space */
+		bus-range = <0 255>;
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		dma-coherent;
+		ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
+				<0 0 0 2 &gic 0 0 0 137 4>,
+				<0 0 0 3 &gic 0 0 0 138 4>,
+				<0 0 0 4 &gic 0 0 0 139 4>;
+		msi-parent = <&v2m_0>;
+		status = "disabled";
+	};
+
+	scpi {
+		compatible = "arm,scpi";
+		mboxes = <&mailbox 1>;
+		shmem = <&cpu_scp_hpri>;
+
+		clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi-dvfs {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>, <1>, <2>;
+				clock-output-names = "atlclk", "aplclk","gpuclk";
+			};
+			scpi_clk: scpi-clk {
+				compatible = "arm,scpi-variable-clocks";
+				#clock-cells = <1>;
+				clock-indices = <3>;
+				clock-output-names = "pxlclk";
+			};
+		};
+
+		scpi_sensors0: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
 	/include/ "juno-clocks.dtsi"
 
 	dma@7ff00000 {
@@ -56,6 +137,7 @@
 			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
@@ -64,6 +146,34 @@
 		clock-names = "apb_pclk";
 	};
 
+	hdlcd@7ff50000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff50000 0 0x1000>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd1_output: hdlcd1-endpoint {
+				remote-endpoint = <&tda998x_1_input>;
+			};
+		};
+	};
+
+	hdlcd@7ff60000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x7ff60000 0 0x1000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&scpi_clk 3>;
+		clock-names = "pxlclk";
+
+		port {
+			hdlcd0_output: hdlcd0-endpoint {
+				remote-endpoint = <&tda998x_0_input>;
+			};
+		};
+	};
+
 	soc_uart0: uart@7ff80000 {
 		compatible = "arm,pl011", "arm,primecell";
 		reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -82,14 +192,24 @@
 		i2c-sda-hold-time-ns = <500>;
 		clocks = <&soc_smc50mhz>;
 
-		dvi0: dvi-transmitter@70 {
+		hdmi-transmitter@70 {
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
+			port {
+				tda998x_0_input: tda998x-0-endpoint {
+					remote-endpoint = <&hdlcd0_output>;
+				};
+			};
 		};
 
-		dvi1: dvi-transmitter@71 {
+		hdmi-transmitter@71 {
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
+			port {
+				tda998x_1_input: tda998x-1-endpoint {
+					remote-endpoint = <&hdlcd1_output>;
+				};
+			};
 		};
 	};
 
@@ -123,7 +243,7 @@
 		      <0x00000008 0x80000000 0x1 0x80000000>;
 	};
 
-	smb {
+	smb@08000000 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 3c386680357e..3ad4c3000611 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -46,7 +46,7 @@
 			arm,vexpress,site = <0>;
 			arm,v2m-memory-map = "rs1";
 
-			mb_fixed_3v3: fixedregulator@0 {
+			mb_fixed_3v3: mcc-sb-3v3 {
 				compatible = "regulator-fixed";
 				regulator-name = "MCC_SB_3V3";
 				regulator-min-microvolt = <3300000>;
@@ -59,42 +59,42 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				button@1 {
+				power-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <116>;
 					label = "POWER";
 					gpios = <&iofpga_gpio0 0 0x4>;
 				};
-				button@2 {
+				home-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <102>;
 					label = "HOME";
 					gpios = <&iofpga_gpio0 1 0x4>;
 				};
-				button@3 {
+				rlock-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <152>;
 					label = "RLOCK";
 					gpios = <&iofpga_gpio0 2 0x4>;
 				};
-				button@4 {
+				vol-up-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <115>;
 					label = "VOL+";
 					gpios = <&iofpga_gpio0 3 0x4>;
 				};
-				button@5 {
+				vol-down-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <114>;
 					label = "VOL-";
 					gpios = <&iofpga_gpio0 4 0x4>;
 				};
-				button@6 {
+				nmi-button {
 					debounce_interval = <50>;
 					wakeup-source;
 					linux,code = <99>;
@@ -103,6 +103,21 @@
 				};
 			};
 
+			flash@0,00000000 {
+				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				linux,part-probe = "afs";
+				reg = <0 0x00000000 0x04000000>;
+				bank-width = <4>;
+				/*
+				 * Unfortunately, accessing the flash disturbs
+				 * the CPU idle states (suspend) and CPU
+				 * hotplug of the platform. For this reason,
+				 * flash hardware access is disabled by default.
+				 */
+				status = "disabled";
+			};
+
 			ethernet@2,00000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x00000000 0x10000>;
@@ -124,7 +139,7 @@
 			};
 
 			iofpga@3,00000000 {
-				compatible = "arm,amba-bus", "simple-bus";
+				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 3 0 0x200000>;
@@ -144,7 +159,7 @@
 					compatible = "syscon", "simple-mfd";
 					reg = <0x010000 0x1000>;
 
-					led@08.0 {
+					led0 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x01>;
@@ -152,7 +167,7 @@
 						linux,default-trigger = "heartbeat";
 						default-state = "on";
 					};
-					led@08.1 {
+					led1 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x02>;
@@ -160,7 +175,7 @@
 						linux,default-trigger = "mmc0";
 						default-state = "off";
 					};
-					led@08.2 {
+					led2 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x04>;
@@ -168,7 +183,7 @@
 						linux,default-trigger = "cpu0";
 						default-state = "off";
 					};
-					led@08.3 {
+					led3 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x08>;
@@ -176,7 +191,7 @@
 						linux,default-trigger = "cpu1";
 						default-state = "off";
 					};
-					led@08.4 {
+					led4 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x10>;
@@ -184,7 +199,7 @@
 						linux,default-trigger = "cpu2";
 						default-state = "off";
 					};
-					led@08.5 {
+					led5 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x20>;
@@ -192,14 +207,14 @@
 						linux,default-trigger = "cpu3";
 						default-state = "off";
 					};
-					led@08.6 {
+					led6 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x40>;
 						label = "vexpress:6";
 						default-state = "off";
 					};
-					led@08.7 {
+					led7 {
 						compatible = "register-bit-led";
 						offset = <0x08>;
 						mask = <0x80>;
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index 734e1272b19f..d95d9e7e2dc0 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -34,12 +34,62 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
 		A57_0: cpu@0 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x0 0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_1: cpu@1 {
@@ -48,6 +98,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_0: cpu@100 {
@@ -56,6 +108,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_1: cpu@101 {
@@ -64,6 +118,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_2: cpu@102 {
@@ -72,6 +128,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_3: cpu@103 {
@@ -80,6 +138,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_L2: l2-cache0 {
@@ -112,9 +172,12 @@
 	};
 
 	#include "juno-base.dtsi"
-
 };
 
 &memtimer {
 	status = "okay";
 };
+
+&pcie_ctlr {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
new file mode 100644
index 000000000000..88ecd6182b67
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -0,0 +1,183 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "ARM Juno development board (r2)";
+	compatible = "arm,juno-r2", "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A72_0>;
+				};
+				core1 {
+					cpu = <&A72_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
+		A72_0: cpu@0 {
+			compatible = "arm,cortex-a72","arm,armv8";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		A72_1: cpu@1 {
+			compatible = "arm,cortex-a72","arm,armv8";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A72_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+		};
+
+		A72_L2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		A53_L2: l2-cache1 {
+			compatible = "cache";
+		};
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A72_0>,
+				     <&A72_1>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>,
+				     <&A53_1>,
+				     <&A53_2>,
+				     <&A53_3>;
+	};
+
+	#include "juno-base.dtsi"
+};
+
+&memtimer {
+	status = "okay";
+};
+
+&pcie_ctlr {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index ffa05aeab3c7..dcfcf15a17f5 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -34,12 +34,62 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&A57_0>;
+				};
+				core1 {
+					cpu = <&A57_1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&A53_0>;
+				};
+				core1 {
+					cpu = <&A53_1>;
+				};
+				core2 {
+					cpu = <&A53_2>;
+				};
+				core3 {
+					cpu = <&A53_3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "arm,psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x1010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2500>;
+			};
+		};
+
 		A57_0: cpu@0 {
 			compatible = "arm,cortex-a57","arm,armv8";
 			reg = <0x0 0x0>;
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_1: cpu@1 {
@@ -48,6 +98,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A57_L2>;
+			clocks = <&scpi_dvfs 0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_0: cpu@100 {
@@ -56,6 +108,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_1: cpu@101 {
@@ -64,6 +118,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_2: cpu@102 {
@@ -72,6 +128,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A53_3: cpu@103 {
@@ -80,6 +138,8 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			clocks = <&scpi_dvfs 1>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 		};
 
 		A57_L2: l2-cache0 {
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
index 20addabbd127..a852e28a40e1 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts
@@ -104,7 +104,7 @@
 			     <0 63 4>;
 	};
 
-	smb {
+	smb@08000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 88a7583ed7a7..161ac98418a3 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -55,7 +55,7 @@
 		};
 
 		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 3 0 0x200000>;
@@ -226,7 +226,7 @@
 			};
 		};
 
-		v2m_fixed_3v3: fixedregulator@0 {
+		v2m_fixed_3v3: v2m-3v3 {
 			compatible = "regulator-fixed";
 			regulator-name = "3V3";
 			regulator-min-microvolt = <3300000>;
@@ -238,7 +238,7 @@
 			compatible = "arm,vexpress,config-bus";
 			arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-			v2m_oscclk1: osc@1 {
+			v2m_oscclk1: oscclk1 {
 				/* CLCD clock */
 				compatible = "arm,vexpress-osc";
 				arm,vexpress-sysreg,func = <1 1>;
@@ -247,27 +247,27 @@
 				clock-output-names = "v2m:oscclk1";
 			};
 
-			reset@0 {
+			reset {
 				compatible = "arm,vexpress-reset";
 				arm,vexpress-sysreg,func = <5 0>;
 			};
 
-			muxfpga@0 {
+			muxfpga {
 				compatible = "arm,vexpress-muxfpga";
 				arm,vexpress-sysreg,func = <7 0>;
 			};
 
-			shutdown@0 {
+			shutdown {
 				compatible = "arm,vexpress-shutdown";
 				arm,vexpress-sysreg,func = <8 0>;
 			};
 
-			reboot@0 {
+			reboot {
 				compatible = "arm,vexpress-reboot";
 				arm,vexpress-sysreg,func = <9 0>;
 			};
 
-			dvimode@0 {
+			dvimode {
 				compatible = "arm,vexpress-dvimode";
 				arm,vexpress-sysreg,func = <11 0>;
 			};
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
index 5b1d0181023b..e3a171162bb4 100644
--- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
+++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts
@@ -93,7 +93,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		smbclk: osc@4 {
+		smbclk: smclk {
 			/* SMC clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -102,7 +102,7 @@
 			clock-output-names = "smclk";
 		};
 
-		volt@0 {
+		volt-vio {
 			/* VIO to expansion board above */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -112,7 +112,7 @@
 			regulator-always-on;
 		};
 
-		volt@1 {
+		volt-12v {
 			/* 12V from power connector J6 */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -120,7 +120,7 @@
 			regulator-always-on;
 		};
 
-		temp@0 {
+		temp-fpga {
 			/* FPGA temperature */
 			compatible = "arm,vexpress-temp";
 			arm,vexpress-sysreg,func = <4 0>;
@@ -128,7 +128,7 @@
 		};
 	};
 
-	smb {
+	smb@08000000 {
 		compatible = "simple-bus";
 
 		#address-cells = <2>;
@@ -186,6 +186,6 @@
 				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
 				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 
-		/include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+		/include/ "vexpress-v2m-rs1.dtsi"
 	};
 };
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 120000
index 000000000000..68fd0f8f1dee
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index e21fe66f1837..bec1f8b36f60 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb
+dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 244baf879dc9..ce0ab84e0f2d 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
@@ -50,10 +50,40 @@
 		device_type = "memory";
 		reg = <0x000000000 0x80000000 0x00000000 0x40000000>;
 	};
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&pcie4 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
+&uart3 {
+	status = "ok";
+};
+
+&sdio0 {
+	status = "ok";
+};
 
-	soc: soc {
-		uart3: serial@66130000 {
-			status = "ok";
-		};
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index 3c92d92278e5..6f81c9d7fb06 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi
@@ -31,6 +31,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/bcm-ns2.h>
 
 /memreserve/ 0x84b00000 0x00000008;
 
@@ -44,36 +45,44 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		A57_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		cpu@1 {
+		A57_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		cpu@2 {
+		A57_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		cpu@3 {
+		A57_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a57", "arm,armv8";
 			reg = <0 3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0 0x84b00000>;
+			next-level-cache = <&CLUSTER0_L2>;
+		};
+
+		CLUSTER0_L2: l2-cache@000 {
+			compatible = "cache";
 		};
 	};
 
@@ -89,12 +98,228 @@
 			      IRQ_TYPE_EDGE_RISING)>;
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A57_0>,
+				     <&A57_1>,
+				     <&A57_2>,
+				     <&A57_3>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll_scr BCM_NS2_GENPLL_SCR_SCR_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	pcie0: pcie@20020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x20020000 0 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x00000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi@20020000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>,
+				     <GIC_SPI 278 IRQ_TYPE_NONE>,
+				     <GIC_SPI 279 IRQ_TYPE_NONE>,
+				     <GIC_SPI 280 IRQ_TYPE_NONE>;
+			brcm,num-eq-region = <1>;
+			brcm,num-msi-msg-region = <1>;
+		};
+	};
+
+	pcie4: pcie@50020000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0 0x50020000 0 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <4>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>;
+
+		brcm,pcie-ob;
+		brcm,pcie-ob-oarr-size;
+		brcm,pcie-ob-axi-offset = <0x30000000>;
+		brcm,pcie-ob-window-size = <256>;
+
+		status = "disabled";
+
+		msi-parent = <&msi4>;
+		msi4: msi@50020000 {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>,
+				     <GIC_SPI 302 IRQ_TYPE_NONE>,
+				     <GIC_SPI 303 IRQ_TYPE_NONE>,
+				     <GIC_SPI 304 IRQ_TYPE_NONE>;
+		};
+	};
+
 	soc: soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0 0xffffffff>;
 
+		smmu: mmu@64000000 {
+			compatible = "arm,mmu-500";
+			reg = <0x64000000 0x40000>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+			mmu-masters;
+		};
+
+		lcpll_ddr: lcpll_ddr@6501d058 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-lcpll-ddr";
+			reg = <0x6501d058 0x20>,
+			      <0x6501c020 0x4>,
+			      <0x6501d04c 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll_ddr", "pcie_sata_usb",
+					     "ddr", "ddr_ch2_unused",
+					     "ddr_ch3_unused", "ddr_ch4_unused",
+					     "ddr_ch5_unused";
+		};
+
+		lcpll_ports: lcpll_ports@6501d078 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-lcpll-ports";
+			reg = <0x6501d078 0x20>,
+			      <0x6501c020 0x4>,
+			      <0x6501d054 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll_ports", "wan", "rgmii",
+					     "ports_ch2_unused",
+					     "ports_ch3_unused",
+					     "ports_ch4_unused",
+					     "ports_ch5_unused";
+		};
+
+		genpll_scr: genpll_scr@6501d098 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-genpll-scr";
+			reg = <0x6501d098 0x32>,
+			      <0x6501c020 0x4>,
+			      <0x6501d044 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll_scr", "scr", "fs",
+					     "audio_ref", "scr_ch3_unused",
+					     "scr_ch4_unused", "scr_ch5_unused";
+		};
+
+		genpll_sw: genpll_sw@6501d0c4 {
+			#clock-cells = <1>;
+			compatible = "brcm,ns2-genpll-sw";
+			reg = <0x6501d0c4 0x32>,
+			      <0x6501c020 0x4>,
+			      <0x6501d044 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll_sw", "rpe", "250", "nic",
+					     "chimp", "port", "sdio";
+		};
+
+		crmu: crmu@65024000 {
+			compatible = "syscon";
+			reg = <0x65024000 0x100>;
+		};
+
+		reboot@65024000 {
+			compatible ="syscon-reboot";
+			regmap = <&crmu>;
+			offset = <0x90>;
+			mask = <0xfffffffd>;
+		};
+
 		gic: interrupt-controller@65210000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -105,14 +330,119 @@
 			      <0x65260000 0x1000>;
 		};
 
+		timer0: timer@66030000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66030000 0x1000>;
+			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer1: timer@66040000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66040000 0x1000>;
+			interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer2: timer@66050000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66050000 0x1000>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer3: timer@66060000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x66060000 0x1000>;
+			interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>,
+				 <&iprocslow>,
+				 <&iprocslow>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		i2c0: i2c@66080000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x66080000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@66090000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x66090000 0x1000>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdogclk", "apb_pclk";
+		};
+
+		i2c1: i2c@660b0000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x660b0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
 		uart3: serial@66130000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x66130000 0x100>;
 			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clock-frequency = <23961600>;
+			clocks = <&osc>;
 			status = "disabled";
 		};
+
+		hwrng: hwrng@66220000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x66220000 0x28>;
+		};
+
+		sdio0: sdhci@66420000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66420000 0x100>;
+			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
+		sdio1: sdhci@66430000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x66430000 0x100>;
+			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			bus-width = <8>;
+			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
+			status = "disabled";
+		};
+
+		nand: nand@66460000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x66460000 0x600>,
+			      <0x67015408 0x600>,
+			      <0x66460f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts b/arch/arm64/boot/dts/broadcom/vulcan-eval.dts
new file mode 100644
index 000000000000..9ee8d3da0e3f
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/vulcan-eval.dts
@@ -0,0 +1,33 @@
+/*
+ * dts file for Broadcom (BRCM) Vulcan Evaluation Platform
+ *
+ * Copyright (c) 2013-2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "vulcan.dtsi"
+
+/ {
+	model = "Broadcom Vulcan Eval Platform";
+	compatible = "brcm,vulcan-eval", "brcm,vulcan-soc";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0x0 0x80000000>,  /* 2G @ 2G  */
+		      <0x00000008 0x80000000 0x0 0x80000000>;  /* 2G @ 34G */
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
new file mode 100644
index 000000000000..85820e2bca9d
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
@@ -0,0 +1,147 @@
+/*
+ * dtsi file for Broadcom (BRCM) Vulcan processor
+ *
+ * Copyright (c) 2013-2016 Broadcom
+ * Author: Zi Shen Lim <zlim@broadcom.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Broadcom Vulcan";
+	compatible = "brcm,vulcan-soc";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* just 4 cpus now, 128 needed in full config */
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "brcm,vulcan", "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@400080000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		#redistributor-regions = <1>;
+		reg = <0x04 0x00080000 0x0 0x20000>,	/* GICD */
+		      <0x04 0x01000000 0x0 0x1000000>;	/* GICR */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gicits: gic-its@40010000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x04 0x00100000 0x0 0x20000>;	/* GIC ITS */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */
+	};
+
+	clk125mhz: uart_clk125mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "clk125mhz";
+	};
+
+	pci {
+		compatible = "pci-host-ecam-generic";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* ECAM at 0x3000_0000 - 0x4000_0000 */
+		reg = <0x0 0x30000000  0x0 0x10000000>;
+		reg-names = "PCI ECAM";
+
+		/*
+		 * PCI ranges:
+		 *   IO		no supported
+		 *   MEM        0x4000_0000 - 0x6000_0000
+		 *   MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+		 */
+		ranges =
+		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
+		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map =
+		      /* addr  pin  ic   icaddr  icintr */
+			<0 0 0  1  &gic   0 0    GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  2  &gic   0 0    GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  3  &gic   0 0    GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+			 0 0 0  4  &gic   0 0    GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		msi-parent = <&gicits>;
+		dma-coherent;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@402020000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x04 0x02020000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk125mhz>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
index 9cb7cf94284a..2eb9b225f0bc 100644
--- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
+++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
@@ -360,6 +360,11 @@
 		             <1 10 0xff01>;
 	};
 
+	pmu {
+		compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+		interrupts = <1 7 4>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index 20310e5b6d6f..50c9b9383cfa 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 5424cc450f72..d8767b00862e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos7.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -52,11 +53,288 @@
 	status = "okay";
 };
 
+&hsi2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <200000>;
+	status = "okay";
+
+	s2mps15_pmic@66 {
+		compatible = "samsung,s2mps15-pmic";
+		reg = <0x66>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpa0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq>;
+		wakeup-source;
+
+		s2mps15_osc: clocks {
+			compatible = "samsung,s2mps13-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps13_ap", "s2mps13_cp",
+				"s2mps13_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vqmmc-sdcard";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_ldo4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1110000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <2250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vmmc-sdcard";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_ldo18";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_ldo19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_ldo23";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3375000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1470000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_ldo27";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-enable-ramp-delay = <125>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_atlas";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_buck5";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_buck7";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_buck8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_buck9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_buck10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-ramp-delay = <25000>;
+				regulator-enable-ramp-delay = <250>;
+			};
+		};
+	};
+};
+
+&pinctrl_alive {
+	pmic_irq: pmic-irq {
+		samsung,pins = "gpa0-2";
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
 &mmc_0 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
 	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
 	non-removable;
 	card-detect-delay = <200>;
 	clock-frequency = <800000000>;
@@ -80,5 +358,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
 	bus-width = <4>;
+	vmmc-supply = <&ldo17_reg>;
+	vqmmc-supply = <&ldo2_reg>;
 	disable-wp;
 };
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 2eef4a279131..f77ddaf21d04 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -586,3 +586,106 @@
 		samsung,pin-drv = <2>;
 	};
 };
+
+&pinctrl_bus1 {
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv6: gpv6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi5_bus: spi5-bus {
+		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	ufs_refclk_out: ufs-refclk-out {
+		samsung,pins = "gpg2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	ufs_rst_n: ufs-rst-n {
+		samsung,pins = "gph1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index d7a37c3a6b52..93108f1a90f9 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -26,6 +26,7 @@
 		pinctrl5 = &pinctrl_ese;
 		pinctrl6 = &pinctrl_fsys0;
 		pinctrl7 = &pinctrl_fsys1;
+		pinctrl8 = &pinctrl_bus1;
 	};
 
 	cpus {
@@ -278,6 +279,12 @@
 			interrupts = <0 203 0>;
 		};
 
+		pinctrl_bus1: pinctrl@14870000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14870000 0x1000>;
+			interrupts = <0 384 0>;
+		};
+
 		hsi2c_0: hsi2c@13640000 {
 			compatible = "samsung,exynos7-hsi2c";
 			reg = <0x13640000 0x1000>;
@@ -447,6 +454,13 @@
 			reg = <0x105c0000 0x5000>;
 		};
 
+		reboot: syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pmu_system_controller>;
+			offset = <0x0400>;
+			mask = <0x1>;
+		};
+
 		rtc: rtc@10590000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10590000 0x100>;
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 4f2de3e789ee..f3c25165dad3 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,7 @@
-dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
  
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
new file mode 100644
index 000000000000..ce235577e90f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -0,0 +1,116 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+};
+
+&i2c0 {
+	status = "okay";
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+	adt7461a@4c {
+		compatible = "adi,adt7461";
+		reg = <0x4c>;
+	};
+	eeprom@52 {
+		compatible = "at24,24c512";
+		reg = <0x52>;
+	};
+	eeprom@53 {
+		compatible = "at24,24c512";
+		reg = <0x53>;
+	};
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x1 0x0 0x0 0x7e800000 0x00010000
+		  0x2 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
new file mode 100644
index 000000000000..be72bf5b58b5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -0,0 +1,530 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&clockgen 1 0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+		      /* DRAM space 1, size: 2GiB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&dcfg>;
+		offset = <0xb0>;
+		mask = <0x02>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x1>, /* Physical Secure PPI */
+			     <1 14 0x1>, /* Physical Non-Secure PPI */
+			     <1 11 0x1>, /* Virtual PPI */
+			     <1 10 0x1>; /* Hypervisor PPI */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 0x4>,
+			     <0 107 0x4>,
+			     <0 95 0x4>,
+			     <0 97 0x4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1043a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1043a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1043a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: dspi@2110000 {
+			compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			dmas = <&edma0 1 39>,
+			       <&edma0 1 38>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		gpio1: gpio@2300000 {
+			compatible = "fsl,ls1043a-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2310000 {
+			compatible = "fsl,ls1043a-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2320000 {
+			compatible = "fsl,ls1043a-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@2330000 {
+			compatible = "fsl,ls1043a-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 134 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&clockgen 0 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: wdog@2ad0000 {
+			compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 0x4>;
+			clocks = <&clockgen 4 0>;
+			clock-names = "wdog";
+			big-endian;
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 0x4>,
+				     <0 103 0x4>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 0>,
+				 <&clockgen 4 0>;
+		};
+
+		usb0: usb3@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		usb1: usb3@3000000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3000000 0x0 0x10000>;
+			interrupts = <0 61 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		usb2: usb3@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 63 0x4>;
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 69 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		msi1: msi-controller1@1571000 {
+			compatible = "fsl,1s1043a-msi";
+			reg = <0x0 0x1571000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 116 0x4>;
+		};
+
+		msi2: msi-controller2@1572000 {
+			compatible = "fsl,1s1043a-msi";
+			reg = <0x0 0x1572000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 126 0x4>;
+		};
+
+		msi3: msi-controller3@1573000 {
+			compatible = "fsl,1s1043a-msi";
+			reg = <0x0 0x1573000 0x0 0x8>;
+			msi-controller;
+			interrupts = <0 160 0x4>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>, /* controller interrupt */
+				     <0 117 0x4>; /* PME interrupt */
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
+					<0000 0 0 2 &gic 0 111 0x4>,
+					<0000 0 0 3 &gic 0 112 0x4>,
+					<0000 0 0 4 &gic 0 113 0x4>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 128 0x4>,
+				     <0 127 0x4>;
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 120  0x4>,
+					<0000 0 0 2 &gic 0 121 0x4>,
+					<0000 0 0 3 &gic 0 122 0x4>,
+					<0000 0 0 4 &gic 0 123 0x4>;
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 162 0x4>,
+				     <0 161 0x4>;
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
+					<0000 0 0 2 &gic 0 155 0x4>,
+					<0000 0 0 3 &gic 0 156 0x4>,
+					<0000 0 0 4 &gic 0 157 0x4>;
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
new file mode 100644
index 000000000000..4cb996d6e686
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -0,0 +1,204 @@
+/*
+ * Device Tree file for Freescale LS2080a QDS Board.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a QDS Board";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x02>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <500>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <1>;
+	};
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	status = "okay";
+	qflash0: s25fl008k {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
new file mode 100644
index 000000000000..e127f0baab19
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -0,0 +1,166 @@
+/*
+ * Device Tree file for Freescale LS2080a RDB Board.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2080a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x5 0x80000000 0x08000000
+		  0x2 0x0 0x5 0x30000000 0x00010000
+		  0x3 0x0 0x5 0x20000000 0x00010000>;
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+	     compatible = "fsl,ifc-nand";
+	     reg = <0x2 0x0 0x10000>;
+	};
+
+	cpld@3,0 {
+	     reg = <0x3 0x0 0x10000>;
+	     compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis";
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@75 {
+		compatible = "nxp,pca9547";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x01>;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			adt7481@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&dspi {
+	status = "okay";
+	dflash0: n25q512a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80";
+		spi-max-frequency = <3000000>;
+		reg = <0>;
+	};
+};
+
+&qspi {
+	status = "disabled";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index 82e2a6fccc64..505d038078a3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,7 +1,7 @@
 /*
- * Device Tree file for Freescale LS2085a software Simulator model
+ * Device Tree file for Freescale LS2080a software Simulator model
  *
- * Copyright (C) 2014, Freescale Semiconductor
+ * Copyright (C) 2014-2015, Freescale Semiconductor
  *
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
@@ -20,11 +20,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -51,11 +46,16 @@
 
 /dts-v1/;
 
-/include/ "fsl-ls2085a.dtsi"
+/include/ "fsl-ls2080a.dtsi"
 
 / {
-	model = "Freescale Layerscape 2085a software Simulator model";
-	compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+	model = "Freescale Layerscape 2080a software Simulator model";
+	compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
 
 	ethernet@2210000 {
 		compatible = "smsc,lan91c111";
@@ -63,3 +63,8 @@
 		interrupts = <0 58 0x1>;
 	};
 };
+
+&ifc {
+	status = "okay";
+};
+
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
new file mode 100644
index 000000000000..9d746c69a789
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -0,0 +1,594 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2080A family SoC.
+ *
+ * Copyright (C) 2014-2015, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "fsl,ls2080a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+
+		/* We have 4 clusters having 2 Cortex-A57 cores each */
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			clocks = <&clockgen 1 1>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			clocks = <&clockgen 1 1>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x200>;
+			clocks = <&clockgen 1 2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x201>;
+			clocks = <&clockgen 1 2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x300>;
+			clocks = <&clockgen 1 3>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x301>;
+			clocks = <&clockgen 1 3>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+			<0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
+			<0x0 0x0c0c0000 0 0x2000>, /* GICC */
+			<0x0 0x0c0d0000 0 0x1000>, /* GICH */
+			<0x0 0x0c0e0000 0 0x20000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+
+		its: gic-its@6020000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x6020000 0 0x20000>;
+		};
+	};
+
+	rstcr: syscon@1e60000 {
+		compatible = "fsl,ls2080a-rstcr", "syscon";
+		reg = <0x0 0x1e60000 0x0 0x4>;
+	};
+
+	reboot {
+		compatible ="syscon-reboot";
+		regmap = <&rstcr>;
+		offset = <0x0>;
+		mask = <0x2>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1300000 {
+			compatible = "fsl,ls2080a-clockgen";
+			reg = <0 0x1300000 0 0xa0000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		serial0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		serial1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			clocks = <&clockgen 4 3>;
+			interrupts = <0 32 0x4>; /* Level high type */
+		};
+
+		cluster1_core0_watchdog: wdt@c000000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc000000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster1_core1_watchdog: wdt@c010000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc010000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core0_watchdog: wdt@c100000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc100000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster2_core1_watchdog: wdt@c110000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc110000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core0_watchdog: wdt@c200000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc200000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster3_core1_watchdog: wdt@c210000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc210000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core0_watchdog: wdt@c300000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc300000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		cluster4_core1_watchdog: wdt@c310000 {
+			compatible = "arm,sp805-wdt", "arm,primecell";
+			reg = <0x0 0xc310000 0x0 0x1000>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "apb_pclk", "wdog_clk";
+		};
+
+		fsl_mc: fsl-mc@80c000000 {
+			compatible = "fsl,qoriq-mc";
+			reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+			      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+		};
+
+		smmu: iommu@5000000 {
+			compatible = "arm,mmu-500";
+			reg = <0 0x5000000 0 0x800000>;
+			#global-interrupts = <12>;
+			interrupts = <0 13 4>, /* global secure fault */
+				     <0 14 4>, /* combined secure interrupt */
+				     <0 15 4>, /* global non-secure fault */
+				     <0 16 4>, /* combined non-secure interrupt */
+				/* performance counter interrupts 0-7 */
+				     <0 211 4>, <0 212 4>,
+				     <0 213 4>, <0 214 4>,
+				     <0 215 4>, <0 216 4>,
+				     <0 217 4>, <0 218 4>,
+				/* per context interrupt, 64 interrupts */
+				     <0 146 4>, <0 147 4>,
+				     <0 148 4>, <0 149 4>,
+				     <0 150 4>, <0 151 4>,
+				     <0 152 4>, <0 153 4>,
+				     <0 154 4>, <0 155 4>,
+				     <0 156 4>, <0 157 4>,
+				     <0 158 4>, <0 159 4>,
+				     <0 160 4>, <0 161 4>,
+				     <0 162 4>, <0 163 4>,
+				     <0 164 4>, <0 165 4>,
+				     <0 166 4>, <0 167 4>,
+				     <0 168 4>, <0 169 4>,
+				     <0 170 4>, <0 171 4>,
+				     <0 172 4>, <0 173 4>,
+				     <0 174 4>, <0 175 4>,
+				     <0 176 4>, <0 177 4>,
+				     <0 178 4>, <0 179 4>,
+				     <0 180 4>, <0 181 4>,
+				     <0 182 4>, <0 183 4>,
+				     <0 184 4>, <0 185 4>,
+				     <0 186 4>, <0 187 4>,
+				     <0 188 4>, <0 189 4>,
+				     <0 190 4>, <0 191 4>,
+				     <0 192 4>, <0 193 4>,
+				     <0 194 4>, <0 195 4>,
+				     <0 196 4>, <0 197 4>,
+				     <0 198 4>, <0 199 4>,
+				     <0 200 4>, <0 201 4>,
+				     <0 202 4>, <0 203 4>,
+				     <0 204 4>, <0 205 4>,
+				     <0 206 4>, <0 207 4>,
+				     <0 208 4>, <0 209 4>;
+			mmu-masters = <&fsl_mc 0x300 0>;
+		};
+
+		dspi: dspi@2100000 {
+			status = "disabled";
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 26 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+		};
+
+		esdhc: esdhc@2140000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <0 28 0x4>; /* Level high type */
+			clock-frequency = <0>;	/* Updated by bootloader */
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 36 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 37 0x4>; /* Level high type */
+			gpio-controller;
+			little-endian;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2c0: i2c@2000000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c1: i2c@2010000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2010000 0x0 0x10000>;
+			interrupts = <0 34 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c2: i2c@2020000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2020000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		i2c3: i2c@2030000 {
+			status = "disabled";
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2030000 0x0 0x10000>;
+			interrupts = <0 35 0x4>; /* Level high type */
+			clock-names = "i2c";
+			clocks = <&clockgen 4 3>;
+		};
+
+		ifc: ifc@2240000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x2240000 0x0 0x20000>;
+			interrupts = <0 21 0x4>; /* Level high type */
+			little-endian;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x5 0x80000000 0x08000000
+				  2 0 0x5 0x30000000 0x00010000
+				  3 0 0x5 0x20000000 0x00010000>;
+		};
+
+		qspi: quadspi@20c0000 {
+			status = "disabled";
+			compatible = "fsl,vf610-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 25 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "qspi_en", "qspi";
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x10 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 108 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
+					<0000 0 0 2 &gic 0 0 0 110 4>,
+					<0000 0 0 3 &gic 0 0 0 111 4>,
+					<0000 0 0 4 &gic 0 0 0 112 4>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x12 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 113 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
+					<0000 0 0 2 &gic 0 0 0 115 4>,
+					<0000 0 0 3 &gic 0 0 0 116 4>,
+					<0000 0 0 4 &gic 0 0 0 117 4>;
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x14 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <8>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
+					<0000 0 0 2 &gic 0 0 0 120 4>,
+					<0000 0 0 3 &gic 0 0 0 121 4>,
+					<0000 0 0 4 &gic 0 0 0 122 4>;
+		};
+
+		pcie@3700000 {
+			compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+				     "snps,dw-pcie";
+			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
+			       0x16 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 123 0x4>; /* Level high type */
+			interrupt-names = "intr";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&its>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
+					<0000 0 0 2 &gic 0 0 0 125 4>,
+					<0000 0 0 3 &gic 0 0 0 126 4>,
+					<0000 0 0 4 &gic 0 0 0 127 4>;
+		};
+
+		sata0: sata@3200000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 133 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+		};
+
+		sata1: sata@3210000 {
+			status = "disabled";
+			compatible = "fsl,ls2080a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>;
+			interrupts = <0 136 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>;
+		};
+
+		usb0: usb3@3100000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 80 0x4>; /* Level high type */
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		usb1: usb3@3110000 {
+			status = "disabled";
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <0 81 0x4>; /* Level high type */
+			dr_mode = "host";
+			snps,quirk-frame-length-adjustment = <0x20>;
+		};
+
+		ccn@4000000 {
+			compatible = "arm,ccn-504";
+			reg = <0x0 0x04000000 0x0 0x01000000>;
+			interrupts = <0 12 4>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
deleted file mode 100644
index e281ceb338c3..000000000000
--- a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Device Tree Include file for Freescale Layerscape-2085A family SoC.
- *
- * Copyright (C) 2014, Freescale Semiconductor
- *
- * Bhupesh Sharma <bhupesh.sharma@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
-	compatible = "fsl,ls2085a";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		/*
-		 * We expect the enable-method for cpu's to be "psci", but this
-		 * is dependent on the SoC FW, which will fill this in.
-		 *
-		 * Currently supported enable-method is psci v0.2
-		 */
-
-		/* We have 4 clusters having 2 Cortex-A57 cores each */
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x0>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x100>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x101>;
-		};
-
-		cpu@200 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x200>;
-		};
-
-		cpu@201 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x201>;
-		};
-
-		cpu@300 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x300>;
-		};
-
-		cpu@301 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a57";
-			reg = <0x0 0x301>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>;
-		      /* DRAM space - 1, size : 2 GB DRAM */
-	};
-
-	gic: interrupt-controller@6000000 {
-		compatible = "arm,gic-v3";
-		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
-		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <1 9 0x4>;
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
-			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
-			     <1 11 0x8>, /* Virtual PPI, active-low */
-			     <1 10 0x8>; /* Hypervisor PPI, active-low */
-	};
-
-	serial0: serial@21c0500 {
-		device_type = "serial";
-		compatible = "fsl,ns16550", "ns16550a";
-		reg = <0x0 0x21c0500 0x0 0x100>;
-		clock-frequency = <0>;	/* Updated by bootloader */
-		interrupts = <0 32 0x1>; /* edge triggered */
-	};
-
-	serial1: serial@21c0600 {
-		device_type = "serial";
-		compatible = "fsl,ns16550", "ns16550a";
-		reg = <0x0 0x21c0600 0x0 0x100>;
-		clock-frequency = <0>; 	/* Updated by bootloader */
-		interrupts = <0 32 0x1>; /* edge triggered */
-	};
-
-	fsl_mc: fsl-mc@80c000000 {
-		compatible = "fsl,qoriq-mc";
-		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
-		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
-	};
-};
diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile
index fa81a6ee6473..cd158b80e29b 100644
--- a/arch/arm64/boot/dts/hisilicon/Makefile
+++ b/arch/arm64/boot/dts/hisilicon/Makefile
@@ -1,4 +1,4 @@
-dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index e36a539468a5..818525197508 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -17,11 +17,14 @@
 	compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
 
 	aliases {
-		serial0 = &uart0;
+		serial0 = &uart0; /* On board UART0 */
+		serial1 = &uart1; /* BT UART */
+		serial2 = &uart2; /* LS Expansion UART0 */
+		serial3 = &uart3; /* LS Expansion UART1 */
 	};
 
 	chosen {
-		stdout-path = "serial0:115200n8";
+		stdout-path = "serial3:115200n8";
 	};
 
 	memory@0 {
@@ -29,3 +32,10 @@
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
 };
+
+&uart2 {
+	label = "LS-UART0";
+};
+&uart3 {
+	label = "LS-UART1";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 3f03380815b6..ad1f1ebcb05c 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi6220-clock.h>
 
 / {
 	compatible = "hisilicon,hi6220";
@@ -146,6 +147,7 @@
 			compatible = "hisilicon,hi6220-sysctrl", "syscon";
 			reg = <0x0 0xf7030000 0x0 0x2000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
 		media_ctrl: media_ctrl@f4410000 {
@@ -164,8 +166,48 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf8015000 0x0 0x1000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
+			clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+				 <&ao_ctrl HI6220_UART0_PCLK>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		uart1: uart@f7111000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7111000 0x0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+				 <&sys_ctrl HI6220_UART1_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: uart@f7112000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7112000 0x0 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+				 <&sys_ctrl HI6220_UART2_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: uart@f7113000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7113000 0x0 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+				 <&sys_ctrl HI6220_UART3_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart4: uart@f7114000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xf7114000 0x0 0x1000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+				 <&sys_ctrl HI6220_UART4_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
new file mode 100644
index 000000000000..e9436c0d81f7
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -0,0 +1,54 @@
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hip05.dtsi"
+
+/ {
+	model = "Hisilicon Hip05 D02 Development Board";
+	compatible = "hisilicon,hip05-d02";
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x80000000>;
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pwrbutton {
+			label = "Power Button";
+			gpios = <&porta 8 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			debounce-interval = <0>;
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};
+
+&peri_gpio0 {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
new file mode 100644
index 000000000000..6319ff3b03ea
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi
@@ -0,0 +1,364 @@
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "hisilicon,hip05-d02";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&cpu8>;
+				};
+				core1 {
+					cpu = <&cpu9>;
+				};
+				core2 {
+					cpu = <&cpu10>;
+				};
+				core3 {
+					cpu = <&cpu11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&cpu12>;
+				};
+				core1 {
+					cpu = <&cpu13>;
+				};
+				core2 {
+					cpu = <&cpu14>;
+				};
+				core3 {
+					cpu = <&cpu15>;
+				};
+			};
+		};
+
+		cpu0: cpu@20000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20000>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu1: cpu@20001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20001>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu2: cpu@20002 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20002>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu3: cpu@20003 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20003>;
+			enable-method = "psci";
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu4: cpu@20100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20100>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu5: cpu@20101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20101>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu6: cpu@20102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20102>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu7: cpu@20103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20103>;
+			enable-method = "psci";
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu8: cpu@20200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20200>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu9: cpu@20201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20201>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu10: cpu@20202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20202>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu11: cpu@20203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20203>;
+			enable-method = "psci";
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu12: cpu@20300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20300>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu13: cpu@20301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20301>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu14: cpu@20302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20302>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu15: cpu@20303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x20303>;
+			enable-method = "psci";
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: l2-cache0 {
+			compatible = "cache";
+		};
+
+		cluster1_l2: l2-cache1 {
+			compatible = "cache";
+		};
+
+		cluster2_l2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		cluster3_l2: l2-cache3 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@8d000000 {
+		compatible = "arm,gic-v3";
+                #interrupt-cells = <3>;
+                #address-cells = <2>;
+                #size-cells = <2>;
+                ranges;
+                interrupt-controller;
+                #redistributor-regions = <1>;
+                redistributor-stride = <0x0 0x30000>;
+		reg = <0x0 0x8d000000 0 0x10000>,	/* GICD */
+		      <0x0 0x8d100000 0 0x300000>,	/* GICR */
+		      <0x0 0xfe000000 0 0x10000>,	/* GICC */
+		      <0x0 0xfe010000 0 0x10000>,       /* GICH */
+		      <0x0 0xfe020000 0 0x10000>;       /* GICV */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		its_peri: interrupt-controller@8c000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x8c000000 0x0 0x40000>;
+		};
+
+		its_m3: interrupt-controller@a3000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xa3000000 0x0 0x40000>;
+		};
+
+		its_pcie: interrupt-controller@b7000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xb7000000 0x0 0x40000>;
+		};
+
+		its_dsa: interrupt-controller@c6000000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0xc6000000 0x0 0x40000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		refclk200mhz: refclk200mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		peri_c_subctrl: syscon@80000000 {
+			compatible = "hisilicon,hip05-perisubc", "syscon";
+			reg = < 0x0 0x80000000 0x0 0x10000>;
+		};
+
+		uart0: uart@80300000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x80300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&refclk200mhz>;
+			clock-names = "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: uart@80310000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x80310000 0x0 0x10000>;
+			interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&refclk200mhz>;
+			clock-names = "apb_pclk";
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		peri_gpio0: gpio@802e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802e0000 0x0 0x10000>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		peri_gpio1: gpio@802f0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x802f0000 0x0 0x10000>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
index 606dd5a05c2d..933cba359918 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi
@@ -10,8 +10,8 @@ soc0: soc@000000000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "hisilicon,hns-mdio";
-		reg = <0x0 0x803c0000 0x0 0x10000
-		       0x0 0x80000000 0x0 0x10000>;
+		reg = <0x0 0x803c0000 0x0 0x10000>;
+		subctrl-vbase = <&peri_c_subctrl>;
 
 		soc0_phy0: ethernet-phy@0 {
 			reg = <0x0>;
@@ -23,9 +23,8 @@ soc0: soc@000000000 {
 		};
 	};
 
-	dsa: dsa@c7000000 {
+	dsaf0: dsa@c7000000 {
 		compatible = "hisilicon,hns-dsaf-v1";
-		dsa_name = "dsaf0";
 		mode = "6port-16rss";
 		interrupt-parent = <&mbigen_dsa>;
 
@@ -127,7 +126,7 @@ soc0: soc@000000000 {
 
 	eth0: ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <0>;
 		local-mac-address = [00 00 00 01 00 58];
 		status = "disabled";
@@ -135,14 +134,14 @@ soc0: soc@000000000 {
 	};
 	eth1: ethernet@1{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <1>;
 		status = "disabled";
 		dma-coherent;
 	};
 	eth2: ethernet@2{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <2>;
 		local-mac-address = [00 00 00 01 00 5a];
 		status = "disabled";
@@ -150,7 +149,7 @@ soc0: soc@000000000 {
 	};
 	eth3: ethernet@3{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <3>;
 		local-mac-address = [00 00 00 01 00 5b];
 		status = "disabled";
@@ -158,7 +157,7 @@ soc0: soc@000000000 {
 	};
 	eth4: ethernet@4{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <4>;
 		local-mac-address = [00 00 00 01 00 5c];
 		status = "disabled";
@@ -166,7 +165,7 @@ soc0: soc@000000000 {
 	};
 	eth5: ethernet@5{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <5>;
 		local-mac-address = [00 00 00 01 00 5d];
 		status = "disabled";
@@ -174,7 +173,7 @@ soc0: soc@000000000 {
 	};
 	eth6: ethernet@6{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <6>;
 		local-mac-address = [00 00 00 01 00 5e];
 		status = "disabled";
@@ -182,7 +181,7 @@ soc0: soc@000000000 {
 	};
 	eth7: ethernet@7{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <7>;
 		local-mac-address = [00 00 00 01 00 5f];
 		status = "disabled";
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index e2f6afa7f849..308468d377d0 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,4 +1,10 @@
+# Berlin SoC Family
 dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
+
+# Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
new file mode 100644
index 000000000000..c9e5325b8ac3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi
@@ -0,0 +1,53 @@
+/*
+ * Device Tree Include file for Marvell Armada 371x family of SoCs
+ * (also named 88F3710)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3710 SoC";
+	compatible = "marvell,armada3710", "marvell,armada3700";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
new file mode 100644
index 000000000000..359050154511
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -0,0 +1,86 @@
+/*
+ * Device Tree file for Marvell Armada 3720 development board
+ * (DB-88F3720-DDR3)
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "armada-372x.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 Development Board DB-88F3720-DDR3";
+	compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	soc {
+		internal-regs {
+			/*
+			* Exported on the micro USB connector CON32
+			* through an FTDI
+			*/
+			uart0: serial@12000 {
+				status = "okay";
+			};
+
+			/* CON31 */
+			usb3@58000 {
+				status = "okay";
+			};
+
+			/* CON3 */
+			sata@e0000 {
+			       status = "okay";
+			};
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
new file mode 100644
index 000000000000..f292a00ce97c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Include file for Marvell Armada 372x family of SoCs
+ * (also named 88F3720)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-37xx.dtsi"
+
+/ {
+	model = "Marvell Armada 3720 SoC";
+	compatible = "marvell,armada3720", "marvell,armada3710";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
new file mode 100644
index 000000000000..ba9df7ff2a72
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -0,0 +1,131 @@
+/*
+ * Device Tree Include file for Marvell Armada 37xx family of SoCs.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 37xx SoC";
+	compatible = "marvell,armada3700";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		internal-regs {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			/* 32M internal register @ 0xd000_0000 */
+			ranges = <0x0 0x0 0xd0000000 0x2000000>;
+
+			uart0: serial@12000 {
+				compatible = "marvell,armada-3700-uart";
+				reg = <0x12000 0x400>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			usb3@58000 {
+				compatible = "generic-xhci";
+				reg = <0x58000 0x4000>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-3700-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gic: interrupt-controller@1d00000 {
+				compatible = "arm,gic-v3";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x1d00000 0x10000>, /* GICD */
+				      <0x1d40000 0x40000>; /* GICR */
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
new file mode 100644
index 000000000000..52575756d0be
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and
+ * one CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+
+/ {
+	model = "Marvell Armada 7020";
+	compatible = "marvell,armada7020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
new file mode 100644
index 000000000000..064a251346dd
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada 7040 Development board platform
+ */
+
+#include "armada-7040.dtsi"
+
+/ {
+	model = "Marvell Armada 7040 DB board";
+	compatible = "marvell,armada7040-db", "marvell,armada7040",
+		     "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ap806 {
+		config-space {
+			spi@510600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <10000000>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0 0x200000>;
+					};
+					partition@400000 {
+						label = "Filesystem";
+						reg = <0x200000 0xce0000>;
+					};
+				};
+			};
+
+			i2c@511000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@512000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
new file mode 100644
index 000000000000..7a2de8bf7907
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and
+ * one CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+
+/ {
+	model = "Marvell Armada 7040";
+	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
new file mode 100644
index 000000000000..73d69d99513f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
+ * two CP110.
+ */
+
+#include "armada-ap806-dual.dtsi"
+
+/ {
+	model = "Marvell Armada 8020";
+	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
new file mode 100644
index 000000000000..a1406a40959e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and
+ * two CP110.
+ */
+
+#include "armada-ap806-quad.dtsi"
+
+/ {
+	model = "Marvell Armada 8040";
+	compatible = "marvell,armada8040", "marvell,armada-ap806-quad",
+		     "marvell,armada-ap806";
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
new file mode 100644
index 000000000000..f25c5c17fad7
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Dual";
+	compatible = "marvell,armada-ap806-dual", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
new file mode 100644
index 000000000000..baa7d9a516b3
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include "armada-ap806.dtsi"
+
+/ {
+	model = "Marvell Armada AP806 Quad";
+	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+	};
+
+};
+
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
new file mode 100644
index 000000000000..556a92bcc2f6
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2016 Marvell Technology Group Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	model = "Marvell Armada AP806";
+	compatible = "marvell,armada-ap806";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+
+	ap806 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			xor0@400000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x400000 0x1000>,
+				      <0x410000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			xor1@420000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x420000 0x1000>,
+				      <0x430000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			xor2@440000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x440000 0x1000>,
+				      <0x450000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			xor3@460000 {
+				compatible = "marvell,mv-xor-v2";
+				reg = <0x460000 0x1000>,
+				      <0x470000 0x1000>;
+				msi-parent = <&gic_v2m0>;
+				dma-coherent;
+			};
+
+			spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@511000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+			};
+
+			serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+			};
+
+			serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ringclk 2>;
+				status = "disabled";
+
+			};
+
+			dfx-server@6f8000 {
+				compatible = "simple-mfd", "syscon";
+				reg = <0x6f8000 0x70000>;
+
+				coreclk: clk@204 {
+					compatible = "marvell,armada-ap806-core-clock";
+					#clock-cells = <1>;
+					clock-output-names = "ddr", "ring", "cpu";
+				};
+
+				ringclk: clk@250 {
+					compatible = "marvell,armada-ap806-ring-clock";
+					#clock-cells = <1>;
+					clock-output-names = "ring-0", "ring-2",
+							     "ring-3", "ring-4",
+							     "ring-5";
+					clocks = <&coreclk 1>;
+				};
+			};
+		};
+	};
+
+};
+
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
new file mode 100644
index 000000000000..348c37ecf069
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+	model = "Marvell BG4CT STB board";
+	compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		/* the first 16MB is for firmwares' usage */
+		reg = <0 0x01000000 0 0x7f000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index dd4a10d605d9..099ad93bb49b 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -55,7 +55,7 @@
 	};
 
 	psci {
-		compatible = "arm,psci-0.2";
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
 	};
 
@@ -68,6 +68,7 @@
 			device_type = "cpu";
 			reg = <0x0>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu1: cpu@1 {
@@ -75,6 +76,7 @@
 			device_type = "cpu";
 			reg = <0x1>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu2: cpu@2 {
@@ -82,6 +84,7 @@
 			device_type = "cpu";
 			reg = <0x2>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 		};
 
 		cpu3: cpu@3 {
@@ -89,6 +92,19 @@
 			device_type = "cpu";
 			reg = <0x3>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <75>;
+				exit-latency-us = <155>;
+				min-residency-us = <1000>;
+			};
 		};
 	};
 
@@ -135,6 +151,106 @@
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		soc_pinctrl: pin-controller@ea8000 {
+			compatible = "marvell,berlin4ct-soc-pinctrl";
+			reg = <0xea8000 0x14>;
+		};
+
+		avio_pinctrl: pin-controller@ea8400 {
+			compatible = "marvell,berlin4ct-avio-pinctrl";
+			reg = <0xea8400 0x8>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -151,6 +267,59 @@
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
+			wdt0: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&osc>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@4000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x4000 0x100>;
+				clocks = <&osc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@5000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x5000 0x100>;
+				clocks = <&osc>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
+			sm_gpio0: gpio@8000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x8000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio1: gpio@9000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x9000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
 			uart0: uart@d000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0xd000 0x100>;
@@ -158,6 +327,18 @@
 				clocks = <&osc>;
 				reg-shift = <2>;
 				status = "disabled";
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+			};
+		};
+
+		system_pinctrl: pin-controller@fe2200 {
+			compatible = "marvell,berlin4ct-system-pinctrl";
+			reg = <0xfe2200 0xc>;
+
+			uart0_pmux: uart0-pmux {
+				groups = "SM_URT0_TXD", "SM_URT0_RXD";
+				function = "uart0";
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 4be66cadbc7c..7453a47b3047 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt8173.dtsi"
 
 / {
@@ -32,6 +33,15 @@
 	};
 
 	chosen { };
+
+	usb_p1_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &i2c1 {
@@ -92,6 +102,13 @@
 };
 
 &pio {
+	disp_pwm0_pins: disp_pwm0_pins {
+		pins1 {
+			pinmux = <MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0>;
+			output-low;
+		};
+	};
+
 	mmc0_pins_default: mmc0default {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
@@ -190,7 +207,16 @@
 	};
 };
 
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&disp_pwm0_pins>;
+	status = "okay";
+};
+
 &pwrap {
+	/* Only MT8173 E1 needs USB power domain */
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+
 	pmic: mt6397 {
 		compatible = "mediatek,mt6397";
 		interrupt-parent = <&pio>;
@@ -387,6 +413,30 @@
 	};
 };
 
+&pio {
+	spi_pins_a: spi0 {
+		pins_spi {
+			pinmux = <MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_>,
+				<MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_>,
+				<MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_>,
+				<MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_>;
+		};
+	};
+};
+
+&spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_pins_a>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
+
+&usb30 {
+	vusb33-supply = <&mt6397_vusb_reg>;
+	vbus-supply = <&usb_p1_vbus>;
+	mediatek,wakeup-src = <1>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 06a15644be38..eab7efc2302d 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,8 +14,10 @@
 #include <dt-bindings/clock/mt8173-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/memory/mt8173-larb-port.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mt8173-power.h>
-#include <dt-bindings/reset-controller/mt8173-resets.h>
+#include <dt-bindings/reset/mt8173-resets.h>
 #include "mt8173-pinfunc.h"
 
 / {
@@ -95,7 +97,7 @@
 	};
 
 	psci {
-		compatible = "arm,psci";
+		compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
 		method = "smc";
 		cpu_suspend   = <0x84000001>;
 		cpu_off	      = <0x84000002>;
@@ -116,6 +118,13 @@
 		clock-output-names = "clk32k";
 	};
 
+	cpum_ck: oscillator@2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "cpum_ck";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
@@ -227,8 +236,10 @@
 			#power-domain-cells = <1>;
 			reg = <0 0x10006000 0 0x1000>;
 			clocks = <&clk26m>,
-				 <&topckgen CLK_TOP_MM_SEL>;
-			clock-names = "mfg", "mm";
+				 <&topckgen CLK_TOP_MM_SEL>,
+				 <&topckgen CLK_TOP_VENC_SEL>,
+				 <&topckgen CLK_TOP_VENC_LT_SEL>;
+			clock-names = "mfg", "mm", "venc", "venc_lt";
 			infracfg = <&infracfg>;
 		};
 
@@ -238,6 +249,15 @@
 			reg = <0 0x10007000 0 0x100>;
 		};
 
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8173-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_CLK_13M>,
+				 <&topckgen CLK_TOP_RTC_SEL>;
+		};
+
 		pwrap: pwrap@1000d000 {
 			compatible = "mediatek,mt8173-pwrap";
 			reg = <0 0x1000d000 0 0x1000>;
@@ -258,6 +278,22 @@
 			reg = <0 0x10200620 0 0x20>;
 		};
 
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8173-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_M4U>;
+			clock-names = "bclk";
+			mediatek,larbs = <&larb0 &larb1 &larb2
+					  &larb3 &larb4 &larb5>;
+			#iommu-cells = <1>;
+		};
+
+		efuse: efuse@10206000 {
+			compatible = "mediatek,mt8173-efuse";
+			reg = <0 0x10206000 0 0x1000>;
+		};
+
 		apmixedsys: clock-controller@10209000 {
 			compatible = "mediatek,mt8173-apmixedsys";
 			reg = <0 0x10209000 0 0x1000>;
@@ -365,7 +401,31 @@
 			status = "disabled";
 		};
 
-		i2c3: i2c3@11010000 {
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8173-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&pericfg CLK_PERI_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		nor_flash: spi@1100d000 {
+			compatible = "mediatek,mt8173-nor";
+			reg = <0 0x1100d000 0 0xe0>;
+			clocks = <&pericfg CLK_PERI_SPI>,
+				 <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
+			clock-names = "spi", "sf";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@11010000 {
 			compatible = "mediatek,mt8173-i2c";
 			reg = <0 0x11010000 0 0x70>,
 			      <0 0x11000280 0 0x80>;
@@ -381,7 +441,7 @@
 			status = "disabled";
 		};
 
-		i2c4: i2c4@11011000 {
+		i2c4: i2c@11011000 {
 			compatible = "mediatek,mt8173-i2c";
 			reg = <0 0x11011000 0 0x70>,
 			      <0 0x11000300 0 0x80>;
@@ -397,7 +457,7 @@
 			status = "disabled";
 		};
 
-		i2c6: i2c6@11013000 {
+		i2c6: i2c@11013000 {
 			compatible = "mediatek,mt8173-i2c";
 			reg = <0 0x11013000 0 0x70>,
 			      <0 0x11000080 0 0x80>;
@@ -487,6 +547,168 @@
 			clock-names = "source", "hclk";
 			status = "disabled";
 		};
+
+		usb30: usb@11270000 {
+			compatible = "mediatek,mt8173-xhci";
+			reg = <0 0x11270000 0 0x1000>,
+			      <0 0x11280700 0 0x0100>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+			clocks = <&topckgen CLK_TOP_USB30_SEL>,
+				 <&pericfg CLK_PERI_USB0>,
+				 <&pericfg CLK_PERI_USB1>;
+			clock-names = "sys_ck",
+				      "wakeup_deb_p0",
+				      "wakeup_deb_p1";
+			phys = <&phy_port0 PHY_TYPE_USB3>,
+			       <&phy_port1 PHY_TYPE_USB2>;
+			mediatek,syscon-wakeup = <&pericfg>;
+			status = "okay";
+		};
+
+		u3phy: usb-phy@11290000 {
+			compatible = "mediatek,mt8173-u3phy";
+			reg = <0 0x11290000 0 0x800>;
+			clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+			clock-names = "u3phya_ref";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "okay";
+
+			phy_port0: port@11290800 {
+				reg = <0 0x11290800 0 0x800>;
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			phy_port1: port@11291000 {
+				reg = <0 0x11291000 0 0x800>;
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		mmsys: clock-controller@14000000 {
+			compatible = "mediatek,mt8173-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwm0: pwm@1401e000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401e000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM026M>,
+				 <&mmsys CLK_MM_DISP_PWM0MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		pwm1: pwm@1401f000 {
+			compatible = "mediatek,mt8173-disp-pwm",
+				     "mediatek,mt6595-disp-pwm";
+			reg = <0 0x1401f000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&mmsys CLK_MM_DISP_PWM126M>,
+				 <&mmsys CLK_MM_DISP_PWM1MM>;
+			clock-names = "main", "mm";
+			status = "disabled";
+		};
+
+		larb0: larb@14021000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14021000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+		};
+
+		smi_common: smi@14022000 {
+			compatible = "mediatek,mt8173-smi-common";
+			reg = <0 0x14022000 0 0x1000>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_SMI_COMMON>;
+			clock-names = "apb", "smi";
+		};
+
+		larb4: larb@14027000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x14027000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_SMI_LARB4>,
+				 <&mmsys CLK_MM_SMI_LARB4>;
+			clock-names = "apb", "smi";
+		};
+
+		imgsys: clock-controller@15000000 {
+			compatible = "mediatek,mt8173-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_ISP>;
+			clocks = <&imgsys CLK_IMG_LARB2_SMI>,
+				 <&imgsys CLK_IMG_LARB2_SMI>;
+			clock-names = "apb", "smi";
+		};
+
+		vdecsys: clock-controller@16000000 {
+			compatible = "mediatek,mt8173-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@16010000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+			clocks = <&vdecsys CLK_VDEC_CKEN>,
+				 <&vdecsys CLK_VDEC_LARB_CKEN>;
+			clock-names = "apb", "smi";
+		};
+
+		vencsys: clock-controller@18000000 {
+			compatible = "mediatek,mt8173-vencsys", "syscon";
+			reg = <0 0x18000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@18001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x18001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_CKE1>,
+				 <&vencsys CLK_VENC_CKE0>;
+			clock-names = "apb", "smi";
+		};
+
+		vencltsys: clock-controller@19000000 {
+			compatible = "mediatek,mt8173-vencltsys", "syscon";
+			reg = <0 0x19000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb5: larb@19001000 {
+			compatible = "mediatek,mt8173-smi-larb";
+			reg = <0 0x19001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>;
+			clocks = <&vencltsys CLK_VENCLT_CKE1>,
+				 <&vencltsys CLK_VENCLT_CKE0>;
+			clock-names = "apb", "smi";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
new file mode 100644
index 000000000000..a7e865da1005
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -0,0 +1,7 @@
+dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
+dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
+
+always		:= $(dtb-y)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
new file mode 100644
index 000000000000..62f33fc84e3e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -0,0 +1,1132 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra132.dtsi"
+
+/ {
+	model = "NVIDIA Tegra132 Norrin";
+	compatible = "nvidia,norrin", "nvidia,tegra132", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@0,7000d000/as3722@40";
+		rtc1 = "/rtc@0,7000e000";
+	};
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "disabled";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@0,54540000 {
+			status = "okay";
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux: dpaux@0,545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	gpu@0,57000000 {
+		status = "okay";
+
+		vdd-supply = <&vdd_gpu>;
+	};
+
+	pinmux@0,70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: pinmux@0 {
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4",
+					      "pg5",
+					      "pg6",
+					      "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0",
+					      "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "kb_col4_pq4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5",
+					      "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mic_det_l {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_ap {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			en_vdd_sd {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lid_open {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+					      "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5",
+					      "usb_vbus_en2_pff1";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+			ac_ok {
+				nvidia,pins = "pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			codec_irq_l {
+				nvidia,pins = "ph4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_bl_en {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch_irq_l {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tpm_davint_l {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_irq_l {
+				nvidia,pins = "pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_reset_l {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <1>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ts_shdn_l {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sensor_irq_l {
+				nvidia,pins = "pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wifi_en {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			chromeos_write_protect {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp_det_l {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			soc_warm_reset_l {
+				nvidia,pins = "pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@0,70006000 {
+		status = "okay";
+	};
+
+	pwm: pwm@0,7000a000 {
+		status = "okay";
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@0,7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		as3722: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux@0 {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio2_4_7 {
+					pins = "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3 {
+					pins = "gpio3";
+					function = "gpio";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+
+				gpio6 {
+					pins = "gpio6";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_sys>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo0 {
+					regulator-name = "+1.05_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@0,7000d400 {
+		status = "okay";
+
+		ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <3000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c_20: i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: smart-battery {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					battery-name = "battery";
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <10>;
+				/*	power-supplies = <&charger>; */
+				};
+			};
+
+			keyboard-controller {
+				compatible = "google,cros-ec-keyb";
+				keypad,num-rows = <8>;
+				keypad,num-columns = <13>;
+				google,needs-ghost-filter;
+				linux,keymap =
+					<MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+					 MATRIX_KEY(0x00, 0x02, KEY_F1)
+					 MATRIX_KEY(0x00, 0x03, KEY_B)
+					 MATRIX_KEY(0x00, 0x04, KEY_F10)
+					 MATRIX_KEY(0x00, 0x06, KEY_N)
+					 MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+					 MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+					 MATRIX_KEY(0x01, 0x01, KEY_ESC)
+					 MATRIX_KEY(0x01, 0x02, KEY_F4)
+					 MATRIX_KEY(0x01, 0x03, KEY_G)
+					 MATRIX_KEY(0x01, 0x04, KEY_F7)
+					 MATRIX_KEY(0x01, 0x06, KEY_H)
+					 MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+					 MATRIX_KEY(0x01, 0x09, KEY_F9)
+					 MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+					 MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+					 MATRIX_KEY(0x02, 0x01, KEY_TAB)
+					 MATRIX_KEY(0x02, 0x02, KEY_F3)
+					 MATRIX_KEY(0x02, 0x03, KEY_T)
+					 MATRIX_KEY(0x02, 0x04, KEY_F6)
+					 MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+					 MATRIX_KEY(0x02, 0x06, KEY_Y)
+					 MATRIX_KEY(0x02, 0x07, KEY_102ND)
+					 MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+					 MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+					 MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+					 MATRIX_KEY(0x03, 0x02, KEY_F2)
+					 MATRIX_KEY(0x03, 0x03, KEY_5)
+					 MATRIX_KEY(0x03, 0x04, KEY_F5)
+					 MATRIX_KEY(0x03, 0x06, KEY_6)
+					 MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+					 MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+					 MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+					 MATRIX_KEY(0x04, 0x01, KEY_A)
+					 MATRIX_KEY(0x04, 0x02, KEY_D)
+					 MATRIX_KEY(0x04, 0x03, KEY_F)
+					 MATRIX_KEY(0x04, 0x04, KEY_S)
+					 MATRIX_KEY(0x04, 0x05, KEY_K)
+					 MATRIX_KEY(0x04, 0x06, KEY_J)
+					 MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+					 MATRIX_KEY(0x04, 0x09, KEY_L)
+					 MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+					 MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+					 MATRIX_KEY(0x05, 0x01, KEY_Z)
+					 MATRIX_KEY(0x05, 0x02, KEY_C)
+					 MATRIX_KEY(0x05, 0x03, KEY_V)
+					 MATRIX_KEY(0x05, 0x04, KEY_X)
+					 MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+					 MATRIX_KEY(0x05, 0x06, KEY_M)
+					 MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+					 MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+					 MATRIX_KEY(0x05, 0x09, KEY_DOT)
+					 MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+					 MATRIX_KEY(0x06, 0x01, KEY_1)
+					 MATRIX_KEY(0x06, 0x02, KEY_3)
+					 MATRIX_KEY(0x06, 0x03, KEY_4)
+					 MATRIX_KEY(0x06, 0x04, KEY_2)
+					 MATRIX_KEY(0x06, 0x05, KEY_8)
+					 MATRIX_KEY(0x06, 0x06, KEY_7)
+					 MATRIX_KEY(0x06, 0x08, KEY_0)
+					 MATRIX_KEY(0x06, 0x09, KEY_9)
+					 MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+					 MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+					 MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+					 MATRIX_KEY(0x07, 0x01, KEY_Q)
+					 MATRIX_KEY(0x07, 0x02, KEY_E)
+					 MATRIX_KEY(0x07, 0x03, KEY_R)
+					 MATRIX_KEY(0x07, 0x04, KEY_W)
+					 MATRIX_KEY(0x07, 0x05, KEY_I)
+					 MATRIX_KEY(0x07, 0x06, KEY_U)
+					 MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+					 MATRIX_KEY(0x07, 0x08, KEY_P)
+					 MATRIX_KEY(0x07, 0x09, KEY_O)
+					 MATRIX_KEY(0x07, 0x0b, KEY_UP)
+					 MATRIX_KEY(0x07, 0x0c, KEY_LEFT)>;
+			};
+		};
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		#wake-cells = <3>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+	};
+
+	/* WIFI/BT module */
+	sdhci@0,700b0000 {
+		status = "disabled";
+	};
+
+	/* external SD/MMC */
+	sdhci@0,700b0400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* EMMC 4.51 */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@0,7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@0,7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@0,7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		backlight-boot-off;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;
+			linux,code = <0>;
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n116bge", "simple-panel";
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <19000000>;
+			regulator-max-microvolt = <19000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_led: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "+VDD_LED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_usb1_vbus: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+5V_USB_SS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_panel: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+3.3V_PANEL";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_5v0_ts: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+5V_VDD_TS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
new file mode 100644
index 000000000000..6e28e41d7e3e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -0,0 +1,990 @@
+#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra124-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nvidia,tegra132", "nvidia,tegra124";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie-controller@0,01003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
+		phy-names = "pcie";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@0,50000000 {
+		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@0,54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@0,54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		hdmi@0,54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x0 0x54280000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		sor@0,54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@0,545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+	};
+
+	gic: interrupt-controller@0,50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x2000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@0,57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra124-ictlr", "nvidia,tegra30-ictlr";
+		reg = <0x0 0x60004000 0x0 0x100>,
+		      <0x0 0x60004100 0x0 0x100>,
+		      <0x0 0x60004200 0x0 0x100>,
+		      <0x0 0x60004300 0x0 0x100>,
+		      <0x0 0x60004400 0x0 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@0,60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+		clock-names = "timer";
+	};
+
+	tegra_car: clock@0,60006000 {
+		compatible = "nvidia,tegra132-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		nvidia,external-memory-controller = <&emc>;
+	};
+
+	flow-controller@0,60007000 {
+		compatible = "nvidia,tegra124-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	actmon@0,6000c800 {
+		compatible = "nvidia,tegra124-actmon";
+		reg = <0x0 0x6000c800 0x0 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
+			 <&tegra_car TEGRA124_CLK_EMC>;
+		clock-names = "actmon", "emc";
+		resets = <&tegra_car 119>;
+		reset-names = "actmon";
+	};
+
+	gpio: gpio@0,6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@0,60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+		clock-names = "dma";
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@0,70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@0,70000868 {
+		compatible = "nvidia,tegra124-pinmux";
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
+		      <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performance. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@0,70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+		clock-names = "serial";
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@0,70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+		clock-names = "serial";
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@0,70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+		clock-names = "serial";
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@0,70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+		clock-names = "serial";
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@0,7000a000 {
+		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA124_CLK_PWM>;
+		clock-names = "pwm";
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@0,7000c000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c400 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c500 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c700 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000d000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000d100 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000dc00 0x0 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000de00 0x0 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@0,7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	pmc@0,7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	fuse@0,7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@0,70019000 {
+		compatible = "nvidia,tegra132-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	emc: emc@0,7001b000 {
+		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>;
+
+		nvidia,memory-controller = <&mc>;
+	};
+
+	sata@0,70020000 {
+		compatible = "nvidia,tegra124-ahci";
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SATA>,
+			 <&tegra_car TEGRA124_CLK_SATA_OOB>,
+			 <&tegra_car TEGRA124_CLK_CML1>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+		resets = <&tegra_car 124>,
+			 <&tegra_car 123>,
+			 <&tegra_car 129>;
+		reset-names = "sata", "sata-oob", "sata-cold";
+		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
+		phy-names = "sata-phy";
+		status = "disabled";
+	};
+
+	hda@0,70030000 {
+		compatible = "nvidia,tegra132-hda", "nvidia,tegra124-hda",
+			     "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_HDA>,
+		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	padctl: padctl@0,7009f000 {
+		compatible = "nvidia,tegra132-xusb-padctl",
+			     "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		#phy-cells = <1>;
+
+		phys {
+			pcie-0 {
+				status = "disabled";
+			};
+
+			sata-0 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
+				status = "disabled";
+			};
+
+			utmi-0 {
+				status = "disabled";
+			};
+
+			utmi-1 {
+				status = "disabled";
+			};
+
+			utmi-2 {
+				status = "disabled";
+			};
+		};
+	};
+
+	sdhci@0,700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@0,700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+	};
+
+	ahub@0,70300000 {
+		compatible = "nvidia,tegra124-ahub";
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA124_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 185>, /* amx1 */
+			 <&tegra_car 154>, /* adx */
+			 <&tegra_car 180>, /* adx1 */
+			 <&tegra_car 186>, /* afc0 */
+			 <&tegra_car 187>, /* afc1 */
+			 <&tegra_car 188>, /* afc2 */
+			 <&tegra_car 189>, /* afc3 */
+			 <&tegra_car 190>, /* afc4 */
+			 <&tegra_car 191>; /* afc5 */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "amx1", "adx", "adx1",
+			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		tegra_i2s0: i2s@0,70301000 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301000 0x0 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+			clock-names = "i2s";
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@0,70301100 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301100 0x0 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+			clock-names = "i2s";
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@0,70301200 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301200 0x0 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+			clock-names = "i2s";
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@0,70301300 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301300 0x0 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+			clock-names = "i2s";
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@0,70301400 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301400 0x0 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+			clock-names = "i2s";
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	usb@0,7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "usb";
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@0,7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@0,7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		clock-names = "usb";
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@0,7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@0,7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		clock-names = "usb";
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@0,7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "nvidia,denver", "arm,armv8";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "nvidia,denver", "arm,armv8";
+			reg = <1>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
new file mode 100644
index 000000000000..2b7f88950d1e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -0,0 +1,45 @@
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1";
+	compatible = "nvidia,p2180", "nvidia,tegra210";
+
+	aliases {
+		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x1 0x0>;
+	};
+
+	/* debug port */
+	serial@0,70006000 {
+		status = "okay";
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts
new file mode 100644
index 000000000000..1ddd8512e100
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-0000.dts
@@ -0,0 +1,9 @@
+/dts-v1/;
+
+#include "tegra210-p2530.dtsi"
+#include "tegra210-p2595.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2371 (P2530/P2595) reference design";
+	compatible = "nvidia,p2371-0000", "nvidia,tegra210";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
new file mode 100644
index 000000000000..683b339a980c
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -0,0 +1,9 @@
+/dts-v1/;
+
+#include "tegra210-p2180.dtsi"
+#include "tegra210-p2597.dtsi"
+
+/ {
+	model = "NVIDIA Jetson TX1 Developer Kit";
+	compatible = "nvidia,p2371-2180", "nvidia,tegra210";
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
new file mode 100644
index 000000000000..ece0dec61fae
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
@@ -0,0 +1,50 @@
+#include "tegra210.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2530 main board";
+	compatible = "nvidia,p2530", "nvidia,tegra210";
+
+	aliases {
+		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0xc0000000>;
+	};
+
+	/* debug port */
+	serial@0,70006000 {
+		status = "okay";
+	};
+
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts
new file mode 100644
index 000000000000..58d27ddd57ff
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2571.dts
@@ -0,0 +1,1302 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra210-p2530.dtsi"
+
+/ {
+	model = "NVIDIA Tegra210 P2571 reference design";
+	compatible = "nvidia,p2571", "nvidia,tegra210";
+
+	pinmux: pinmux@0,700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi
new file mode 100644
index 000000000000..f3f91392214e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2595.dtsi
@@ -0,0 +1,1272 @@
+/ {
+	model = "NVIDIA Tegra210 P2595 I/O board";
+	compatible = "nvidia,p2595", "nvidia,tegra210";
+
+	pinmux: pinmux@0,700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "dmic1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "dmic1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "dmic2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "dmic2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,function = "aud";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
new file mode 100644
index 000000000000..be3eccbe8013
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -0,0 +1,1270 @@
+/ {
+	model = "NVIDIA Tegra210 P2597 I/O board";
+	compatible = "nvidia,p2597", "nvidia,tegra210";
+
+	pinmux: pinmux@0,700008d4 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			pex_l0_rst_n_pa0 {
+				nvidia,pins = "pex_l0_rst_n_pa0";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l0_clkreq_n_pa1 {
+				nvidia,pins = "pex_l0_clkreq_n_pa1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pa2 {
+				nvidia,pins = "pex_wake_n_pa2";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pa3 {
+				nvidia,pins = "pex_l1_rst_n_pa3";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_clkreq_n_pa4 {
+				nvidia,pins = "pex_l1_clkreq_n_pa4";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			sata_led_active_pa5 {
+				nvidia,pins = "sata_led_active_pa5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pa6 {
+				nvidia,pins = "pa6";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pb0 {
+				nvidia,pins = "dap1_fs_pb0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pb1 {
+				nvidia,pins = "dap1_din_pb1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_dout_pb2 {
+				nvidia,pins = "dap1_dout_pb2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pb3 {
+				nvidia,pins = "dap1_sclk_pb3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_pb4 {
+				nvidia,pins = "spi2_mosi_pb4";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_miso_pb5 {
+				nvidia,pins = "spi2_miso_pb5";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_sck_pb6 {
+				nvidia,pins = "spi2_sck_pb6";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs0_pb7 {
+				nvidia,pins = "spi2_cs0_pb7";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_mosi_pc0 {
+				nvidia,pins = "spi1_mosi_pc0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_miso_pc1 {
+				nvidia,pins = "spi1_miso_pc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_pc2 {
+				nvidia,pins = "spi1_sck_pc2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs0_pc3 {
+				nvidia,pins = "spi1_cs0_pc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_cs1_pc4 {
+				nvidia,pins = "spi1_cs1_pc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_sck_pc5 {
+				nvidia,pins = "spi4_sck_pc5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_cs0_pc6 {
+				nvidia,pins = "spi4_cs0_pc6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_mosi_pc7 {
+				nvidia,pins = "spi4_mosi_pc7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spi4_miso_pd0 {
+				nvidia,pins = "spi4_miso_pd0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_tx_pd1 {
+				nvidia,pins = "uart3_tx_pd1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rx_pd2 {
+				nvidia,pins = "uart3_rx_pd2";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_pd3 {
+				nvidia,pins = "uart3_rts_pd3";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_pd4 {
+				nvidia,pins = "uart3_cts_pd4";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_clk_pe0 {
+				nvidia,pins = "dmic1_clk_pe0";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic1_dat_pe1 {
+				nvidia,pins = "dmic1_dat_pe1";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_clk_pe2 {
+				nvidia,pins = "dmic2_clk_pe2";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic2_dat_pe3 {
+				nvidia,pins = "dmic2_dat_pe3";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_clk_pe4 {
+				nvidia,pins = "dmic3_clk_pe4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dmic3_dat_pe5 {
+				nvidia,pins = "dmic3_dat_pe5";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe6 {
+				nvidia,pins = "pe6";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pe7 {
+				nvidia,pins = "pe7";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_scl_pf0 {
+				nvidia,pins = "gen3_i2c_scl_pf0";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen3_i2c_sda_pf1 {
+				nvidia,pins = "gen3_i2c_sda_pf1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_tx_pg0 {
+				nvidia,pins = "uart2_tx_pg0";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rx_pg1 {
+				nvidia,pins = "uart2_rx_pg1";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_pg2 {
+				nvidia,pins = "uart2_rts_pg2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_pg3 {
+				nvidia,pins = "uart2_cts_pg3";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_en_ph0 {
+				nvidia,pins = "wifi_en_ph0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_ph1 {
+				nvidia,pins = "wifi_rst_ph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_wake_ap_ph2 {
+				nvidia,pins = "wifi_wake_ap_ph2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_bt_ph3 {
+				nvidia,pins = "ap_wake_bt_ph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_rst_ph4 {
+				nvidia,pins = "bt_rst_ph4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			bt_wake_ap_ph5 {
+				nvidia,pins = "bt_wake_ap_ph5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_wake_nfc_ph7 {
+				nvidia,pins = "ap_wake_nfc_ph7";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_en_pi0 {
+				nvidia,pins = "nfc_en_pi0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			nfc_int_pi1 {
+				nvidia,pins = "nfc_int_pi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_en_pi2 {
+				nvidia,pins = "gps_en_pi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gps_rst_pi3 {
+				nvidia,pins = "gps_rst_pi3";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_tx_pi4 {
+				nvidia,pins = "uart4_tx_pi4";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rx_pi5 {
+				nvidia,pins = "uart4_rx_pi5";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_rts_pi6 {
+				nvidia,pins = "uart4_rts_pi6";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart4_cts_pi7 {
+				nvidia,pins = "uart4_cts_pi7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pj0 {
+				nvidia,pins = "gen1_i2c_sda_pj0";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pj1 {
+				nvidia,pins = "gen1_i2c_scl_pj1";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pj2 {
+				nvidia,pins = "gen2_i2c_scl_pj2";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pj3 {
+				nvidia,pins = "gen2_i2c_sda_pj3";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_fs_pj4 {
+				nvidia,pins = "dap4_fs_pj4";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pj5 {
+				nvidia,pins = "dap4_din_pj5";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_dout_pj6 {
+				nvidia,pins = "dap4_dout_pj6";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_sclk_pj7 {
+				nvidia,pins = "dap4_sclk_pj7";
+				nvidia,function = "i2s4b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "i2s5b";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk5 {
+				nvidia,pins = "pk5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk6 {
+				nvidia,pins = "pk6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl0 {
+				nvidia,pins = "pl0";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pl1 {
+				nvidia,pins = "pl1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pm0 {
+				nvidia,pins = "sdmmc1_clk_pm0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pm1 {
+				nvidia,pins = "sdmmc1_cmd_pm1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_pm2 {
+				nvidia,pins = "sdmmc1_dat3_pm2";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat2_pm3 {
+				nvidia,pins = "sdmmc1_dat2_pm3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat1_pm4 {
+				nvidia,pins = "sdmmc1_dat1_pm4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat0_pm5 {
+				nvidia,pins = "sdmmc1_dat0_pm5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pp0 {
+				nvidia,pins = "sdmmc3_clk_pp0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pp1 {
+				nvidia,pins = "sdmmc3_cmd_pp1";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat3_pp2 {
+				nvidia,pins = "sdmmc3_dat3_pp2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat2_pp3 {
+				nvidia,pins = "sdmmc3_dat2_pp3";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat1_pp4 {
+				nvidia,pins = "sdmmc3_dat1_pp4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pp5 {
+				nvidia,pins = "sdmmc3_dat0_pp5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_mclk_ps0 {
+				nvidia,pins = "cam1_mclk_ps0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_mclk_ps1 {
+				nvidia,pins = "cam2_mclk_ps1";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_ps2 {
+				nvidia,pins = "cam_i2c_scl_ps2";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_sda_ps3 {
+				nvidia,pins = "cam_i2c_sda_ps3";
+				nvidia,function = "i2cvi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			cam_rst_ps4 {
+				nvidia,pins = "cam_rst_ps4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_af_en_ps5 {
+				nvidia,pins = "cam_af_en_ps5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_flash_en_ps6 {
+				nvidia,pins = "cam_flash_en_ps6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_pwdn_ps7 {
+				nvidia,pins = "cam1_pwdn_ps7";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam2_pwdn_pt0 {
+				nvidia,pins = "cam2_pwdn_pt0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam1_strobe_pt1 {
+				nvidia,pins = "cam1_strobe_pt1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_tx_pu0 {
+				nvidia,pins = "uart1_tx_pu0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rx_pu1 {
+				nvidia,pins = "uart1_rx_pu1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_rts_pu2 {
+				nvidia,pins = "uart1_rts_pu2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart1_cts_pu3 {
+				nvidia,pins = "uart1_cts_pu3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_pwm_pv0 {
+				nvidia,pins = "lcd_bl_pwm_pv0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_bl_en_pv1 {
+				nvidia,pins = "lcd_bl_en_pv1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_rst_pv2 {
+				nvidia,pins = "lcd_rst_pv2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio1_pv3 {
+				nvidia,pins = "lcd_gpio1_pv3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_gpio2_pv4 {
+				nvidia,pins = "lcd_gpio2_pv4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ap_ready_pv5 {
+				nvidia,pins = "ap_ready_pv5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_rst_pv6 {
+				nvidia,pins = "touch_rst_pv6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_clk_pv7 {
+				nvidia,pins = "touch_clk_pv7";
+				nvidia,function = "touch";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			modem_wake_ap_px0 {
+				nvidia,pins = "modem_wake_ap_px0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			touch_int_px1 {
+				nvidia,pins = "touch_int_px1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			motion_int_px2 {
+				nvidia,pins = "motion_int_px2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			als_prox_int_px3 {
+				nvidia,pins = "als_prox_int_px3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			temp_alert_px4 {
+				nvidia,pins = "temp_alert_px4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_power_on_px5 {
+				nvidia,pins = "button_power_on_px5";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_up_px6 {
+				nvidia,pins = "button_vol_up_px6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_vol_down_px7 {
+				nvidia,pins = "button_vol_down_px7";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_slide_sw_py0 {
+				nvidia,pins = "button_slide_sw_py0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			button_home_py1 {
+				nvidia,pins = "button_home_py1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_te_py2 {
+				nvidia,pins = "lcd_te_py2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_py3 {
+				nvidia,pins = "pwr_i2c_scl_py3";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_sda_py4 {
+				nvidia,pins = "pwr_i2c_sda_py4";
+				nvidia,function = "i2cpmu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_out_py5 {
+				nvidia,pins = "clk_32k_out_py5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz0 {
+				nvidia,pins = "pz0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz1 {
+				nvidia,pins = "pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz2 {
+				nvidia,pins = "pz2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz3 {
+				nvidia,pins = "pz3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz4 {
+				nvidia,pins = "pz4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pz5 {
+				nvidia,pins = "pz5";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_paa0 {
+				nvidia,pins = "dap2_fs_paa0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_sclk_paa1 {
+				nvidia,pins = "dap2_sclk_paa1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_paa2 {
+				nvidia,pins = "dap2_din_paa2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_paa3 {
+				nvidia,pins = "dap2_dout_paa3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			aud_mclk_pbb0 {
+				nvidia,pins = "aud_mclk_pbb0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_pbb2 {
+				nvidia,pins = "dvfs_clk_pbb2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_pbb3 {
+				nvidia,pins = "gpio_x1_aud_pbb3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_pbb4 {
+				nvidia,pins = "gpio_x3_aud_pbb4";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pcc0 {
+				nvidia,pins = "hdmi_cec_pcc0";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_dp_hpd_pcc1 {
+				nvidia,pins = "hdmi_int_dp_hpd_pcc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pcc2 {
+				nvidia,pins = "spdif_out_pcc2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pcc3 {
+				nvidia,pins = "spdif_in_pcc3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pcc4 {
+				nvidia,pins = "usb_vbus_en0_pcc4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pcc5 {
+				nvidia,pins = "usb_vbus_en1_pcc5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd0_pcc6 {
+				nvidia,pins = "dp_hpd0_pcc6";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pcc7 {
+				nvidia,pins = "pcc7";
+				nvidia,function = "rsvd0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,io-hv = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_pdd0 {
+				nvidia,pins = "spi2_cs1_pdd0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_sck_pee0 {
+				nvidia,pins = "qspi_sck_pee0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_cs_n_pee1 {
+				nvidia,pins = "qspi_cs_n_pee1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io0_pee2 {
+				nvidia,pins = "qspi_io0_pee2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io1_pee3 {
+				nvidia,pins = "qspi_io1_pee3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io2_pee4 {
+				nvidia,pins = "qspi_io2_pee4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			qspi_io3_pee5 {
+				nvidia,pins = "qspi_io3_pee5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "core";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "jtag";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			clk_req {
+				nvidia,pins = "clk_req";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			shutdown {
+				nvidia,pins = "shutdown";
+				nvidia,function = "shutdown";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* MMC/SD */
+	sdhci@0,700b0000 {
+		status = "okay";
+		bus-width = <4>;
+		no-1-8-v;
+
+		cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
new file mode 100644
index 000000000000..23b0630602cf
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -0,0 +1,805 @@
+#include <dt-bindings/clock/tegra210-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra210-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "nvidia,tegra210";
+	interrupt-parent = <&lic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	host1x@0,50000000 {
+		compatible = "nvidia,tegra210-host1x", "simple-bus";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+		clock-names = "host1x";
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>;
+
+		dpaux1: dpaux@0,54040000 {
+			compatible = "nvidia,tegra210-dpaux";
+			reg = <0x0 0x54040000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX1>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 207>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+
+		vi@0,54080000 {
+			compatible = "nvidia,tegra210-vi";
+			reg = <0x0 0x54080000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		tsec@0,54100000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54100000 0x0 0x00040000>;
+		};
+
+		dc@0,54200000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP1>,
+				 <&tegra_car TEGRA210_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@0,54240000 {
+			compatible = "nvidia,tegra210-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DISP2>,
+				 <&tegra_car TEGRA210_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		dsi@0,54300000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54300000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIA>,
+				 <&tegra_car TEGRA210_CLK_DSIALP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		vic@0,54340000 {
+			compatible = "nvidia,tegra210-vic";
+			reg = <0x0 0x54340000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		nvjpg@0,54380000 {
+			compatible = "nvidia,tegra210-nvjpg";
+			reg = <0x0 0x54380000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		dsi@0,54400000 {
+			compatible = "nvidia,tegra210-dsi";
+			reg = <0x0 0x54400000 0x0 0x00040000>;
+			clocks = <&tegra_car TEGRA210_CLK_DSIB>,
+				 <&tegra_car TEGRA210_CLK_DSIBLP>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		nvdec@0,54480000 {
+			compatible = "nvidia,tegra210-nvdec";
+			reg = <0x0 0x54480000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		nvenc@0,544c0000 {
+			compatible = "nvidia,tegra210-nvenc";
+			reg = <0x0 0x544c0000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		tsec@0,54500000 {
+			compatible = "nvidia,tegra210-tsec";
+			reg = <0x0 0x54500000 0x0 0x00040000>;
+			status = "disabled";
+		};
+
+		sor@0,54540000 {
+			compatible = "nvidia,tegra210-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+				 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		sor@0,54580000 {
+			compatible = "nvidia,tegra210-sor1";
+			reg = <0x0 0x54580000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_SOR1>,
+				 <&tegra_car TEGRA210_CLK_PLL_D2_OUT0>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>,
+				 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 183>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@0,545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+				 <&tegra_car TEGRA210_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+
+		isp@0,54600000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54600000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		isp@0,54680000 {
+			compatible = "nvidia,tegra210-isp";
+			reg = <0x0 0x54680000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c@0,546c0000 {
+			compatible = "nvidia,tegra210-i2c-vi";
+			reg = <0x0 0x546c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+
+	gic: interrupt-controller@0,50041000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x2000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-parent = <&gic>;
+	};
+
+	gpu@0,57000000 {
+		compatible = "nvidia,gm20b";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA210_CLK_GPU>,
+			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
+	lic: interrupt-controller@0,60004000 {
+		compatible = "nvidia,tegra210-ictlr";
+		reg = <0x0 0x60004000 0x0 0x40>, /* primary controller */
+		      <0x0 0x60004100 0x0 0x40>, /* secondary controller */
+		      <0x0 0x60004200 0x0 0x40>, /* tertiary controller */
+		      <0x0 0x60004300 0x0 0x40>, /* quaternary controller */
+		      <0x0 0x60004400 0x0 0x40>, /* quinary controller */
+		      <0x0 0x60004500 0x0 0x40>; /* senary controller */
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+	};
+
+	timer@0,60005000 {
+		compatible = "nvidia,tegra210-timer", "nvidia,tegra20-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+		clock-names = "timer";
+	};
+
+	tegra_car: clock@0,60006000 {
+		compatible = "nvidia,tegra210-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@0,60007000 {
+		compatible = "nvidia,tegra210-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	gpio: gpio@0,6000d000 {
+		compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@0,60020000 {
+		compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_APBDMA>;
+		clock-names = "dma";
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@0,70000800 {
+		compatible = "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@0,700008d4 {
+		compatible = "nvidia,tegra210-pinmux";
+		reg = <0x0 0x700008d4 0x0 0x29c>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x294>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performance. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@0,70006000 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTA>;
+		clock-names = "serial";
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@0,70006040 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTB>;
+		clock-names = "serial";
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@0,70006200 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTC>;
+		clock-names = "serial";
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@0,70006300 {
+		compatible = "nvidia,tegra210-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_UARTD>;
+		clock-names = "serial";
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@0,7000a000 {
+		compatible = "nvidia,tegra210-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA210_CLK_PWM>;
+		clock-names = "pwm";
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@0,7000c000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c400 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c500 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c700 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000d000 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000d100 {
+		compatible = "nvidia,tegra210-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d400 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d600 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d800 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000da00 {
+		compatible = "nvidia,tegra210-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@0,7000e000 {
+		compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	pmc: pmc@0,7000e400 {
+		compatible = "nvidia,tegra210-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+
+		#power-domain-cells = <1>;
+	};
+
+	fuse@0,7000f800 {
+		compatible = "nvidia,tegra210-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA210_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@0,70019000 {
+		compatible = "nvidia,tegra210-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA210_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	hda@0,70030000 {
+		compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_HDA>,
+		         <&tegra_car TEGRA210_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA210_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0000 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0200 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0400 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0600 {
+		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
+		clock-names = "sdhci";
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	mipi: mipi@0,700e3000 {
+		compatible = "nvidia,tegra210-mipi";
+		reg = <0x0 0x700e3000 0x0 0x100>;
+		clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>;
+		clock-names = "mipi-cal";
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	spi@0,70410000 {
+		compatible = "nvidia,tegra210-qspi";
+		reg = <0x0 0x70410000 0x0 0x1000>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA210_CLK_QSPI>;
+		clock-names = "qspi";
+		resets = <&tegra_car 211>;
+		reset-names = "qspi";
+		dmas = <&apbdma 5>, <&apbdma 5>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	usb@0,7d000000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "usb";
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@0,7d000000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USBD>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@0,7d004000 {
+		compatible = "nvidia,tegra210-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>;
+		clock-names = "usb";
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@0,7d004000 {
+		compatible = "nvidia,tegra210-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA210_CLK_USB2>,
+			 <&tegra_car TEGRA210_CLK_PLL_U>,
+			 <&tegra_car TEGRA210_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&gic>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 8e94af64ee94..fa1f661ccccf 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,4 +1,5 @@
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index e03c11d9d834..f881437d53c5 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -33,7 +33,7 @@
 	pm8916_mpps_leds: pm8916_mpps_leds {
 		pinconf {
 			pins = "mpp2", "mpp3";
-			function = PMIC_GPIO_FUNC_NORMAL;
+			function = "digital";
 			output-low;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
index cbeee0bcdf52..ee828a8a8236 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi
@@ -10,4 +10,18 @@
 			output-low;
 		};
 	};
+
+	usb_id_default: usb-id-default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio121";
+		};
+
+		pinconf {
+			pins = "gpio121";
+			drive-strength = <8>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 66804ffbc6d2..205ef89b8ca0 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -19,6 +19,13 @@
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
+		serial1 = &blsp1_uart1;
+		usid0 = &pm8916_0;
+		i2c0	= &blsp_i2c2;
+		i2c1	= &blsp_i2c6;
+		i2c3	= &blsp_i2c4;
+		spi0	= &blsp_spi5;
+		spi1	= &blsp_spi3;
 	};
 
 	chosen {
@@ -26,13 +33,52 @@
 	};
 
 	soc {
+		serial@78af000 {
+			label = "LS-UART0";
+			status = "okay";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+		};
+
 		serial@78b0000 {
+			label = "LS-UART1";
 			status = "okay";
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&blsp1_uart2_default>;
 			pinctrl-1 = <&blsp1_uart2_sleep>;
 		};
 
+		i2c@78b6000 {
+		/* On Low speed expansion */
+			label = "LS-I2C0";
+			status = "okay";
+		};
+
+		i2c@78b8000 {
+		/* On High speed expansion */
+			label = "HS-I2C2";
+			status = "okay";
+		};
+
+		i2c@78ba000 {
+		/* On Low speed expansion */
+			label = "LS-I2C1";
+			status = "okay";
+		};
+
+		spi@78b7000 {
+		/* On High speed expansion */
+			label = "HS-SPI1";
+			status = "okay";
+		};
+
+		spi@78b9000 {
+		/* On Low speed expansion */
+			label = "LS-SPI0";
+			status = "okay";
+		};
+
 		leds {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msmgpio_leds>,
@@ -83,5 +129,173 @@
 				default-state = "off";
 			};
 		};
+
+		sdhci@07824000 {
+			vmmc-supply = <&pm8916_l8>;
+			vqmmc-supply = <&pm8916_l5>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+			status = "okay";
+		};
+
+		usb@78d9000 {
+			extcon = <&usb_id>, <&usb_id>;
+			status = "okay";
+		};
+
+		ehci@78d9000 {
+			status = "okay";
+		};
+
+		phy@78d9000 {
+			v1p8-supply = <&pm8916_l7>;
+			v3p3-supply = <&pm8916_l13>;
+			vddcx-supply = <&pm8916_s1>;
+			extcon = <&usb_id>, <&usb_id>;
+			dr_mode = "otg";
+			status = "okay";
+			switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_sw_sel_pm>;
+		};
+
+		lpass@07708000 {
+			status = "okay";
+		};
+	};
+
+	usb2513 {
+		compatible = "smsc,usb3503";
+		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+	};
+
+	usb_id: usb-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_id_default>;
+	};
+};
+
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l5-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s1 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1562000>;
+	};
+
+	s3 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1562000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	l1 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1525000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1525000>;
+	};
+
+	l3 {
+		regulator-min-microvolt = <375000>;
+		regulator-max-microvolt = <1525000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	/**
+	 * 1.8v required on LS expansion
+	 * for mezzanine boards
+	 */
+	l15 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+		regulator-always-on;
+	};
+
+	l16 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l17 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <1750000>;
+		regulator-max-microvolt = <3337000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
index fced77f0fd3a..b0a064d3806b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts
@@ -17,6 +17,6 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8916 MTP";
-	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360",
+	compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp/1",
 			"qcom,msm8916", "qcom,mtp";
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
index a1aa0b201e92..ceeb8a6feed6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi
@@ -17,6 +17,7 @@
 / {
 	aliases {
 		serial0 = &blsp1_uart2;
+		usid0 = &pm8916_0;
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 568956859088..10c83e11c272 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -13,6 +13,35 @@
 
 &msmgpio {
 
+	blsp1_uart1_default: blsp1_uart1_default {
+		pinmux {
+			function = "blsp_uart1";
+			//	TX, RX, CTS_N, RTS_N
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	blsp1_uart1_sleep: blsp1_uart1_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+		};
+		pinconf {
+			pins = "gpio0", "gpio1",
+			       "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
 	blsp1_uart2_default: blsp1_uart2_default {
 		pinmux {
 			function = "blsp_uart2";
@@ -27,7 +56,7 @@
 
 	blsp1_uart2_sleep: blsp1_uart2_sleep {
 		pinmux {
-			function = "blsp_uart2";
+			function = "gpio";
 			pins = "gpio4", "gpio5";
 		};
 		pinconf {
@@ -53,7 +82,7 @@
 		};
 		pinconf_cs {
 			pins = "gpio2";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -81,13 +110,13 @@
 			pins = "gpio6";
 		};
 		pinconf {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
+			pins = "gpio4", "gpio5", "gpio7";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio6";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -115,13 +144,13 @@
 			pins = "gpio10";
 		};
 		pinconf {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
+			pins = "gpio8", "gpio9", "gpio11";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio10";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -149,13 +178,13 @@
 			pins = "gpio14";
 		};
 		pinconf {
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
+			pins = "gpio12", "gpio13", "gpio15";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio14";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -183,13 +212,13 @@
 			pins = "gpio18";
 		};
 		pinconf {
-			pins = "gpio16", "gpio17", "gpio18", "gpio19";
+			pins = "gpio16", "gpio17", "gpio19";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio18";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -217,13 +246,13 @@
 			pins = "gpio22";
 		};
 		pinconf {
-			pins = "gpio20", "gpio21", "gpio22", "gpio23";
+			pins = "gpio20", "gpio21", "gpio23";
 			drive-strength = <12>;
 			bias-disable;
 		};
 		pinconf_cs {
 			pins = "gpio22";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable;
 			output-high;
 		};
@@ -241,6 +270,30 @@
 		};
 	};
 
+	i2c2_default: i2c2_default {
+		pinmux {
+			function = "blsp_i2c2";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <16>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c2_sleep: i2c2_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio6", "gpio7";
+		};
+		pinconf {
+			pins = "gpio6", "gpio7";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
 	i2c4_default: i2c4_default {
 		pinmux {
 			function = "blsp_i2c4";
@@ -248,14 +301,14 @@
 		};
 		pinconf {
 			pins = "gpio14", "gpio15";
-			drive-strength = <2>;
+			drive-strength = <16>;
 			bias-disable = <0>;
 		};
 	};
 
 	i2c4_sleep: i2c4_sleep {
 		pinmux {
-			function = "blsp_i2c4";
+			function = "gpio";
 			pins = "gpio14", "gpio15";
 		};
 		pinconf {
@@ -265,6 +318,30 @@
 		};
 	};
 
+	i2c6_default: i2c6_default {
+		pinmux {
+			function = "blsp_i2c6";
+			pins = "gpio22", "gpio23";
+		};
+		pinconf {
+			pins = "gpio22", "gpio23";
+			drive-strength = <16>;
+			bias-disable = <0>;
+		};
+	};
+
+	i2c6_sleep: i2c6_sleep {
+		pinmux {
+			function = "gpio";
+			pins = "gpio22", "gpio23";
+		};
+		pinconf {
+			pins = "gpio22", "gpio23";
+			drive-strength = <2>;
+			bias-disable = <0>;
+		};
+	};
+
 	sdhc2_cd_pin {
 		sdc2_cd_on: cd_on {
 			pinmux {
@@ -427,4 +504,220 @@
 			};
 		};
 	};
+
+	ext-codec-lines {
+		ext_codec_lines_act: lines_on {
+			pinmux {
+				function = "gpio";
+				pins = "gpio67";
+			};
+			pinconf {
+				pins = "gpio67";
+				drive-strength = <8>;
+				bias-disable;
+				output-high;
+			};
+		};
+		ext_codec_lines_sus: lines_off {
+			pinmux {
+				function = "gpio";
+				pins = "gpio67";
+			};
+			pinconf {
+				pins = "gpio67";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	cdc-pdm-lines {
+		cdc_pdm_lines_act: pdm_lines_on {
+			pinmux {
+				function = "cdc_pdm0";
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+			};
+			pinconf {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+		cdc_pdm_lines_sus: pdm_lines_off {
+			pinmux {
+				function = "cdc_pdm0";
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+			};
+			pinconf {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66",
+				       "gpio67", "gpio68";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	ext-pri-tlmm-lines {
+		ext_pri_tlmm_lines_act: ext_pa_on {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+			};
+			pinconf {
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+
+		ext_pri_tlmm_lines_sus: ext_pa_off {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+			};
+			pinconf {
+				pins = "gpio113", "gpio114", "gpio115",
+				       "gpio116";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	ext-pri-ws-line {
+		ext_pri_ws_act: ext_pa_on {
+			pinmux {
+				function = "pri_mi2s_ws";
+				pins = "gpio110";
+			};
+			pinconf {
+				pins = "gpio110";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+
+		ext_pri_ws_sus: ext_pa_off {
+			pinmux {
+				function = "pri_mi2s_ws";
+				pins = "gpio110";
+			};
+			pinconf {
+				pins = "gpio110";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	ext-mclk-tlmm-lines {
+		ext_mclk_tlmm_lines_act: mclk_lines_on {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio116";
+			};
+			pinconf {
+				pins = "gpio116";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+		ext_mclk_tlmm_lines_sus: mclk_lines_off {
+			pinmux {
+				function = "pri_mi2s";
+				pins = "gpio116";
+			};
+			pinconf {
+				pins = "gpio116";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	/* secondary Mi2S */
+	ext-sec-tlmm-lines {
+		ext_sec_tlmm_lines_act: tlmm_lines_on {
+			pinmux {
+				function = "sec_mi2s";
+				pins = "gpio112", "gpio117", "gpio118",
+				       "gpio119";
+			};
+			pinconf {
+				pins = "gpio112", "gpio117", "gpio118",
+					"gpio119";
+				drive-strength = <8>;
+				bias-pull-none;
+			};
+		};
+		ext_sec_tlmm_lines_sus: tlmm_lines_off {
+			pinmux {
+				function = "sec_mi2s";
+				pins = "gpio112", "gpio117", "gpio118",
+				       "gpio119";
+			};
+			pinconf {
+				pins = "gpio112", "gpio117", "gpio118",
+					"gpio119";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	cdc-dmic-lines {
+		cdc_dmic_lines_act: dmic_lines_on {
+			pinmux_dmic0_clk {
+				function = "dmic0_clk";
+				pins = "gpio0";
+			};
+			pinmux_dmic0_data {
+				function = "dmic0_data";
+				pins = "gpio1";
+			};
+			pinconf {
+				pins = "gpio0", "gpio1";
+				drive-strength = <8>;
+			};
+		};
+		cdc_dmic_lines_sus: dmic_lines_off {
+			pinconf {
+				pins = "gpio0", "gpio1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	cross-conn-det {
+		cross_conn_det_act: lines_on {
+			pinmux {
+				function = "gpio";
+				pins = "gpio120";
+			};
+			pinconf {
+				pins = "gpio120";
+				drive-strength = <8>;
+				output-low;
+				bias-pull-down;
+			};
+		};
+		cross_conn_det_sus: lines_off {
+			pinmux {
+				function = "gpio";
+				pins = "gpio120";
+			};
+			pinconf {
+				pins = "gpio120";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5911de008dd5..96812007850e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -37,6 +37,22 @@
 		reg = <0 0 0 0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		reserve_aligned@86000000 {
+			reg = <0x0 0x86000000 0x0 0x0300000>;
+			no-map;
+		};
+
+		smem_mem: smem_region@86300000 {
+			reg = <0x0 0x86300000 0x0 0x0100000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -45,24 +61,33 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0>;
+			next-level-cache = <&L2_0>;
 		};
 
 		CPU1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x1>;
+			next-level-cache = <&L2_0>;
 		};
 
 		CPU2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x2>;
+			next-level-cache = <&L2_0>;
 		};
 
 		CPU3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache {
+		      compatible = "cache";
+		      cache-level = <2>;
 		};
 	};
 
@@ -74,6 +99,29 @@
 			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	smem {
+		compatible = "qcom,smem";
+
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -95,19 +143,54 @@
 			#interrupt-cells = <2>;
 		};
 
-		gcc: qcom,gcc@1800000 {
+		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-msm8916";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 			reg = <0x1800000 0x80000>;
 		};
 
+		tcsr_mutex_regs: syscon@1905000 {
+			compatible = "syscon";
+			reg = <0x1905000 0x20000>;
+		};
+
+		tcsr_mutex: hwlock {
+			compatible = "qcom,tcsr-mutex";
+			syscon = <&tcsr_mutex_regs 0 0x1000>;
+			#hwlock-cells = <1>;
+		};
+
+		rpm_msg_ram: memory@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x60000 0x8000>;
+		};
+
+		blsp1_uart1: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		apcs: syscon@b011000 {
+			compatible = "syscon";
+			reg = <0x0b011000 0x1000>;
+		};
+
 		blsp1_uart2: serial@78b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x78b0000 0x200>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
+			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -224,6 +307,21 @@
 			status = "disabled";
 		};
 
+		blsp_i2c2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b6000 0x1000>;
+			interrupts = <GIC_SPI 96 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		blsp_i2c4: i2c@78b8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x78b8000 0x1000>;
@@ -239,6 +337,47 @@
 			status = "disabled";
 		};
 
+		blsp_i2c6: i2c@78ba000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78ba000 0x1000>;
+			interrupts = <GIC_SPI 100 0>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		lpass: lpass@07708000 {
+			status = "disabled";
+			compatible = "qcom,lpass-cpu-apq8016";
+			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
+				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
+				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
+
+			clock-names = "ahbix-clk",
+					"pcnoc-mport-clk",
+					"pcnoc-sway-clk",
+					"mi2s-bit-clk0",
+					"mi2s-bit-clk1",
+					"mi2s-bit-clk2",
+					"mi2s-bit-clk3";
+			#sound-dai-cells = <1>;
+
+			interrupts = <0 160 0>;
+			interrupt-names = "lpass-irq-lpaif";
+			reg = <0x07708000 0x10000>;
+			reg-names = "lpass-lpaif";
+		};
+
 		sdhc_1: sdhci@07824000 {
 			compatible = "qcom,sdhci-msm-v4";
 			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
@@ -291,10 +430,11 @@
 			interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
 				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
 
-			qcom,vdd-levels = <1 5 7>;
+			qcom,vdd-levels = <500000 1000000 1320000>;
 			qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
 			dr_mode = "peripheral";
 			qcom,otg-control = <2>; // PMIC
+			qcom,manual-pullup;
 
 			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
 				 <&gcc GCC_USB_HS_SYSTEM_CLK>,
@@ -390,6 +530,60 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
+
+		rng@22000 {
+			compatible = "qcom,prng";
+			reg = <0x00022000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: qcom,rpmcc {
+					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+					#clock-cells = <1>;
+				};
+
+				smd_rpm_regulators: pm8916-regulators {
+					compatible = "qcom,rpm-pm8916-regulators";
+
+					pm8916_s1: s1 {};
+					pm8916_s3: s3 {};
+					pm8916_s4: s4 {};
+
+					pm8916_l1: l1 {};
+					pm8916_l2: l2 {};
+					pm8916_l3: l3 {};
+					pm8916_l4: l4 {};
+					pm8916_l5: l5 {};
+					pm8916_l6: l6 {};
+					pm8916_l7: l7 {};
+					pm8916_l8: l8 {};
+					pm8916_l9: l9 {};
+					pm8916_l10: l10 {};
+					pm8916_l11: l11 {};
+					pm8916_l12: l12 {};
+					pm8916_l13: l13 {};
+					pm8916_l14: l14 {};
+					pm8916_l15: l15 {};
+					pm8916_l16: l16 {};
+					pm8916_l17: l17 {};
+					pm8916_l18: l18 {};
+				};
+			};
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
new file mode 100644
index 000000000000..619af44a595d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "msm8996-mtp.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
+	compatible = "qcom,msm8996-mtp";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
new file mode 100644
index 000000000000..9bab5c011c07
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		serial@75b0000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
new file mode 100644
index 000000000000..0506fb808c56
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -0,0 +1,269 @@
+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8996.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. MSM8996";
+
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+			      compatible = "cache";
+			      cache-level = <2>;
+			};
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "qcom,kryo";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU2>;
+				};
+
+				core1 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@9bc0000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x40000>;
+			reg = <0x09bc0000 0x10000>,
+			      <0x09c00000 0x100000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gcc: clock-controller@300000 {
+			compatible = "qcom,gcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x300000 0x90000>;
+		};
+
+		blsp2_uart1: serial@75b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x75b0000 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		pinctrl@1010000 {
+			compatible = "qcom,msm8996-pinctrl";
+			reg = <0x01010000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		timer@09840000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x09840000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@9850000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09850000 0x1000>,
+				      <0x09860000 0x1000>;
+			};
+
+			frame@9870000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09870000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9880000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09880000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@9890000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x09890000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98a0000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098a0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98b0000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098b0000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@98c0000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x098c0000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		spmi_bus: qcom,spmi@400f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x400f000 0x1000>,
+			      <0x4400000 0x800000>,
+			      <0x4c00000 0x800000>,
+			      <0x5800000 0x200000>,
+			      <0x400a000 0x002100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
+		mmcc: clock-controller@8c0000 {
+			compatible = "qcom,mmcc-msm8996";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x8c0000 0x40000>;
+			assigned-clocks = <&mmcc MMPLL9_PLL>,
+					  <&mmcc MMPLL1_PLL>,
+					  <&mmcc MMPLL3_PLL>,
+					  <&mmcc MMPLL4_PLL>,
+					  <&mmcc MMPLL5_PLL>;
+			assigned-clock-rates = <624000000>,
+					       <810000000>,
+					       <980000000>,
+					       <960000000>,
+					       <825000000>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
new file mode 100644
index 000000000000..ef2207afa86b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@4 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@5 {
+		compatible = "qcom,pm8004", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index b222ece7e3d2..f71679b15d54 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -4,15 +4,15 @@
 
 &spmi_bus {
 
-	usid0: pm8916@0 {
-		compatible = "qcom,spmi-pmic";
+	pm8916_0: pm8916@0 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000 0x6100>;
+			reg = <0x6000>;
 			reg-names = "rtc", "alarm";
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
@@ -27,7 +27,7 @@
 
 		pm8916_gpios: gpios@c000 {
 			compatible = "qcom,pm8916-gpio";
-			reg = <0xc000 0x400>;
+			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
@@ -38,7 +38,7 @@
 
 		pm8916_mpps: mpps@a000 {
 			compatible = "qcom,pm8916-mpp";
-			reg = <0xa000 0x400>;
+			reg = <0xa000>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
@@ -49,7 +49,7 @@
 
 		pm8916_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400 0x100>;
+			reg = <0x2400>;
 			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
 			io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
 			io-channel-names = "thermal";
@@ -58,7 +58,7 @@
 
 		pm8916_vadc: vadc@3100 {
 			compatible = "qcom,spmi-vadc";
-			reg = <0x3100 0x100>;
+			reg = <0x3100>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -90,7 +90,7 @@
 		};
 	};
 
-	usid1: pm8916@1 {
+	pm8916_1: pm8916@1 {
 		compatible = "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
new file mode 100644
index 000000000000..1222d2e904f6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -0,0 +1,62 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8994_gpios: gpios@c000 {
+			compatible = "qcom,pm8994-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>,
+				     <0 0xcc 0 IRQ_TYPE_NONE>,
+				     <0 0xcd 0 IRQ_TYPE_NONE>,
+				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xd0 0 IRQ_TYPE_NONE>,
+				     <0 0xd1 0 IRQ_TYPE_NONE>,
+				     <0 0xd2 0 IRQ_TYPE_NONE>,
+				     <0 0xd3 0 IRQ_TYPE_NONE>,
+				     <0 0xd4 0 IRQ_TYPE_NONE>,
+				     <0 0xd5 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8994_mpps: mpps@a000 {
+			compatible = "qcom,pm8994-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>,
+				     <0 0xa4 0 IRQ_TYPE_NONE>,
+				     <0 0xa5 0 IRQ_TYPE_NONE>,
+				     <0 0xa6 0 IRQ_TYPE_NONE>,
+				     <0 0xa7 0 IRQ_TYPE_NONE>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8994", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
new file mode 100644
index 000000000000..d3879a4e8076
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -0,0 +1,19 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	pmic@3 {
+		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
new file mode 100644
index 000000000000..9ce1890a650e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -0,0 +1,4 @@
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb
+
+always		:= $(dtb-y)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
new file mode 100644
index 000000000000..b992b1a3d956
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -0,0 +1,390 @@
+/*
+ * Device Tree Source for the Salvator-X board
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4613
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7795.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Renesas Salvator-X board based on r8a7795";
+	compatible = "renesas,salvator-x", "renesas,r8a7795";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &scif1;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	x12_clk: x12_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi3: regulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI3 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi3: regulator@4 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI3 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	audio_clkout: audio_clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	rsnd_ak4613: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4613>;
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif1_pins: scif1 {
+		renesas,groups = "scif1_data_a", "scif1_ctrl";
+		renesas,function = "scif1";
+	};
+	scif2_pins: scif2 {
+		renesas,groups = "scif2_data_a";
+		renesas,function = "scif2";
+	};
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk_a";
+		renesas,function = "scif_clk";
+	};
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2_a";
+		renesas,function = "i2c2";
+	};
+
+	avb_pins: avb {
+		renesas,groups = "avb_mdc";
+		renesas,function = "avb";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi3_pins: sd3 {
+		renesas,groups = "sdhi3_data4", "sdhi3_ctrl";
+		renesas,function = "sdhi3";
+	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+				 "audio_clkout_a", "audio_clkout3_a";
+		renesas,function = "audio_clk";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	usb2_pins: usb2 {
+		renesas,groups = "usb2";
+		renesas,function = "usb2";
+	};
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	ak4613: codec@10 {
+		compatible = "asahi-kasei,ak4613";
+		#sound-dai-cells = <0>;
+		reg = <0x10>;
+		clocks = <&rcar_sound 3>;
+
+		asahi-kasei,in1-single-end;
+		asahi-kasei,in2-single-end;
+		asahi-kasei,out1-single-end;
+		asahi-kasei,out2-single-end;
+		asahi-kasei,out3-single-end;
+		asahi-kasei,out4-single-end;
+		asahi-kasei,out5-single-end;
+		asahi-kasei,out6-single-end;
+	};
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x12_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+			capture  = <&ssi1 &src1 &dvc1>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi3>;
+	vqmmc-supply = <&vccq_sdhi3>;
+	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	renesas,no-ether-link;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <900>;
+		rxdv-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd3-skew-ps = <0>;
+		txc-skew-ps = <900>;
+		txen-skew-ps = <0>;
+		txd0-skew-ps = <0>;
+		txd1-skew-ps = <0>;
+		txd2-skew-ps = <0>;
+		txd3-skew-ps = <0>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy2 {
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
new file mode 100644
index 000000000000..a7315ebe3883
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -0,0 +1,1122 @@
+/*
+ * Device Tree Source for the r8a7795 SoC
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r8a7795";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x0>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x1>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+		};
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x2>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+		};
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x3>;
+			device_type = "cpu";
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+		};
+	};
+
+	L2_CA57: cache-controller@0 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	L2_CA53: cache-controller@1 {
+		compatible = "cache";
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		status = "disabled";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@0xf1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x2000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&cpg>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&cpg>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&cpg>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&cpg>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&cpg>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&cpg>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&cpg>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a7795",
+				     "renesas,gpio-rcar";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&cpg>;
+		};
+
+		pmu_a57 {
+			compatible = "arm,cortex-a57-pmu";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-affinity = <&a57_0>,
+					     <&a57_1>,
+					     <&a57_2>,
+					     <&a57_3>;
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <GIC_PPI 13
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7795-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		pfc: pfc@e6060000 {
+			compatible = "renesas,pfc-r8a7795";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a7795", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&cpg>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a7795",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7795",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&cpg>;
+			phy-mode = "rgmii-id";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 96>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 96>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 96>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 96>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a7795",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 96>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 64>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a7795",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
+			dma-names = "tx", "rx";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&cpg>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&cpg>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&cpg>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&cpg>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&cpg>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&cpg>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7795";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&cpg>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;	<&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;	<&rcar_sound N>;
+			 */
+			/*
+			 * #clock-cells is required for audio_clkout0/1/2/3
+			 *
+			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
+			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
+			 */
+			compatible =  "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
+			reg =	<0 0xec500000 0 0x1000>, /* SCU */
+				<0 0xec5a0000 0 0x100>,  /* ADG */
+				<0 0xec540000 0 0x1000>, /* SSIU */
+				<0 0xec541000 0 0x280>,  /* SSI */
+				<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>,
+				 <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc@0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc@1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,src {
+				src0: src@0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src@1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src@2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src@3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src@4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src@5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src@6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src@7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src@8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src@9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi@0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi@1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi@2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi@3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi@4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi@5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi@6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi@7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi@8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi@9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		sata: sata@ee300000 {
+			compatible = "renesas,sata-r8a7795";
+			reg = <0 0xee300000 0 0x1fff>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			status = "disabled";
+		};
+
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7795";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		xhci1: usb@ee0400000 {
+			compatible = "renesas,xhci-r8a7795";
+			reg = <0 0xee040000 0 0xc00>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 327>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7795-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&cpg>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		sdhi0: sd@ee100000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi1: sd@ee120000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi2: sd@ee140000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			power-domains = <&cpg>;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+
+		sdhi3: sd@ee160000 {
+			compatible = "renesas,sdhi-r8a7795";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			power-domains = <&cpg>;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a7795";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			compatible = "renesas,usb2-phy-r8a7795";
+			reg = <0 0xee0a0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 702>;
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2_phy2: usb-phy@ee0c0200 {
+			compatible = "renesas,usb2-phy-r8a7795";
+			reg = <0 0xee0c0200 0 0x700>;
+			clocks = <&cpg CPG_MOD 701>;
+			power-domains = <&cpg>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb@ee0a0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0a0100 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci2: usb@ee0c0100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee0c0100 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb@ee0a0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0a0000 0 0x100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 702>;
+			phys = <&usb2_phy1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci2: usb@ee0c0000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee0c0000 0 0x100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 701>;
+			phys = <&usb2_phy2>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 601e6a236c1d..e3f0b5f4ba4e 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,3 +1,4 @@
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 
 always		:= $(dtb-y)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
new file mode 100644
index 000000000000..8a5275f0539b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3368-evb.dtsi"
+
+/ {
+	model = "Rockchip RK3368 EVB with ACT8846 pmic";
+	compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
new file mode 100644
index 000000000000..6e27b22704df
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -0,0 +1,281 @@
+/*
+ * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3368.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+		pwm-delay-us = <10000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-0 = <&emmc_reset>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		button@0 {
+			wakeup-source;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <116>;
+		};
+	};
+
+	/* supplies both host and otg */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_lan: vcc-lan-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	status = "okay";
+};
+
+&gmac {
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rmii";
+	clock_in_out = "output";
+	snps,reset-gpio = <&gpio3 12 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		bias-disable;
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <0 20 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	emmc {
+		emmc_bus8: emmc-bus8 {
+			rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>,
+					<1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc-clk {
+			rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
+		};
+
+		emmc-cmd {
+			rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>;
+		};
+
+		emmc_reset: emmc-reset {
+			rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdio {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <3 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_rst: bt-rst {
+			rockchip,pins = <3 5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index 401a81231eb9..1f2b642e794a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -71,7 +71,7 @@
 		pinctrl-0 = <&pwr_key>;
 
 		button@0 {
-			gpio-key,wakeup = <1>;
+			wakeup-source;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
 			linux,code = <116>;
@@ -336,6 +336,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi
new file mode 100644
index 000000000000..a10010f92f96
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3368-thermal.dtsi
@@ -0,0 +1,112 @@
+/*
+ * Device Tree Source for RK3368 SoC thermal
+ *
+ * Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd
+ * Caesar Wang <wxt@rock-chips.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <100>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+	thermal-sensors = <&tsadc 0>;
+
+	trips {
+		cpu_alert0: cpu_alert0 {
+			temperature = <75000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_alert1: cpu_alert1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <95000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+				<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <100>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+	thermal-sensors = <&tsadc 1>;
+
+	trips {
+		gpu_alert0: gpu_alert0 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_crit: gpu_crit {
+			temperature = <1150000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&gpu_alert0>;
+			cooling-device =
+				<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index cc093a482aa4..49d119103e31 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3368";
@@ -53,6 +54,7 @@
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &gmac;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -123,6 +125,8 @@
 			reg = <0x0 0x0>;
 			cpu-idle-states = <&cpu_sleep>;
 			enable-method = "psci";
+
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_l1: cpu@1 {
@@ -155,6 +159,8 @@
 			reg = <0x0 0x100>;
 			cpu-idle-states = <&cpu_sleep>;
 			enable-method = "psci";
+
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b1: cpu@101 {
@@ -225,8 +231,9 @@
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0c0000 0x0 0x4000>;
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -248,8 +255,9 @@
 		compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xff0f0000 0x0 0x4000>;
 		clock-freq-min-max = <400000 150000000>;
-		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
-		clock-names = "biu", "ciu";
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
@@ -404,6 +412,27 @@
 		status = "disabled";
 	};
 
+	thermal-zones {
+		#include "rk3368-thermal.dtsi"
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3368-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
 	gmac: ethernet@ff290000 {
 		compatible = "rockchip,rk3368-gmac";
 		reg = <0x0 0xff290000 0x0 0x10000>;
@@ -471,6 +500,48 @@
 		status = "disabled";
 	};
 
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680000 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680010 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680020 0x0 0x10>;
+		#pwm-cells = <3>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3368-pwm", "rockchip,rk3288-pwm";
+		reg = <0x0 0xff680030 0x0 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM1>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
 	uart2: serial@ff690000 {
 		compatible = "rockchip,rk3368-uart", "snps,dw-apb-uart";
 		reg = <0x0 0xff690000 0x0 0x100>;
@@ -510,6 +581,12 @@
 		status = "disabled";
 	};
 
+	timer@ff810000 {
+		compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer";
+		reg = <0x0 0xff810000 0x0 0x20>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	gic: interrupt-controller@ffb71000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
@@ -712,6 +789,24 @@
 			};
 		};
 
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 8 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <3 29 RK_FUNC_3 &pcfg_pull_none>;
+			};
+		};
+
 		sdio0 {
 			sdio0_bus1: sdio0-bus1 {
 				rockchip,pins = <2 28 RK_FUNC_1 &pcfg_pull_up>;
@@ -762,7 +857,7 @@
 				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
-			sdmmc_cd: sdmcc-cd {
+			sdmmc_cd: sdmmc-cd {
 				rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up>;
 			};
 
@@ -829,6 +924,16 @@
 			};
 		};
 
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,
diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile
new file mode 100644
index 000000000000..299b67ec4d44
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/Makefile
@@ -0,0 +1,4 @@
+dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld20-ref.dtb
+
+always		:= $(dtb-y)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
new file mode 100644
index 000000000000..727ae5f8c4e7
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts
@@ -0,0 +1,87 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD20 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld20.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-LD20 Reference Board";
+	compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0xc0000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+};
+
+&ethsc {
+	interrupts = <0 48 4>;
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
new file mode 100644
index 000000000000..e682a3f52791
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
@@ -0,0 +1,287 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD20 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "socionext,ph1-ld20";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0x80000100>;
+		};
+	};
+
+	clocks {
+		uart_clk: uart_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <58820000>;
+		};
+
+		i2c_clk: i2c_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf01>,
+			     <1 14 0xf01>,
+			     <1 11 0xf01>,
+			     <1 10 0xf01>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+
+		serial0: serial@54006800 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006800 0x40>;
+			interrupts = <0 33 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			clocks = <&uart_clk>;
+		};
+
+		serial1: serial@54006900 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006900 0x40>;
+			interrupts = <0 35 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			clocks = <&uart_clk>;
+		};
+
+		serial2: serial@54006a00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006a00 0x40>;
+			interrupts = <0 37 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			clocks = <&uart_clk>;
+		};
+
+		serial3: serial@54006b00 {
+			compatible = "socionext,uniphier-uart";
+			status = "disabled";
+			reg = <0x54006b00 0x40>;
+			interrupts = <0 177 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			clocks = <&uart_clk>;
+		};
+
+		i2c0: i2c@58780000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58780000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 41 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c1: i2c@58781000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58781000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 42 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c2: i2c@58782000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58782000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 43 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c3: i2c@58783000 {
+			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
+			reg = <0x58783000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 44 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <100000>;
+		};
+
+		i2c4: i2c@58784000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58784000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 45 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		i2c5: i2c@58785000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58785000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 25 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		i2c6: i2c@58786000 {
+			compatible = "socionext,uniphier-fi2c";
+			reg = <0x58786000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 26 4>;
+			clocks = <&i2c_clk>;
+			clock-frequency = <400000>;
+		};
+
+		system_bus: system-bus@58c00000 {
+			compatible = "socionext,uniphier-system-bus";
+			status = "disabled";
+			reg = <0x58c00000 0x400>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		smpctrl@59800000 {
+			compatible = "socionext,uniphier-smpctrl";
+			reg = <0x59801000 0x400>;
+		};
+
+		pinctrl: pinctrl@5f801000 {
+			compatible = "socionext,ph1-ld20-pinctrl", "syscon";
+			reg = <0x5f801000 0xe00>;
+		};
+
+		gic: interrupt-controller@5fe00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x5fe00000 0x10000>,	/* GICD */
+			      <0x5fe80000 0x80000>;	/* GICR */
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <1 9 4>;
+		};
+	};
+};
+
+/include/ "uniphier-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
new file mode 120000
index 000000000000..f42fb6f38bd3
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-pinctrl.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/uniphier-pinctrl.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
new file mode 120000
index 000000000000..1246db9be2a1
--- /dev/null
+++ b/arch/arm64/boot/dts/socionext/uniphier-support-card.dtsi
@@ -0,0 +1 @@
+../../../../arm/boot/dts/uniphier-support-card.dtsi
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
new file mode 100644
index 000000000000..cdc6a437dcc7
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
@@ -0,0 +1,88 @@
+/*
+ * clock specification for Xilinx ZynqMP ep108 development board
+ *
+ * (C) Copyright 2015, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+&amba {
+	misc_clk: misc_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	i2c_clk: i2c_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0x0>;
+		clock-frequency = <111111111>;
+	};
+
+	sata_clk: sata_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <75000000>;
+	};
+};
+
+&can0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&gem0 {
+	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
+};
+
+&gpio {
+	clocks = <&misc_clk>;
+};
+
+&i2c0 {
+	clocks = <&i2c_clk>;
+};
+
+&i2c1 {
+	clocks = <&i2c_clk>;
+};
+
+&sata {
+	clocks = <&sata_clk>;
+};
+
+&sdhci0 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&sdhci1 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&spi0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&spi1 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&uart0 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
+&usb0 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&usb1 {
+	clocks = <&misc_clk>, <&misc_clk>;
+};
+
+&watchdog0 {
+	clocks= <&misc_clk>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index ce5d848251fa..acb0527fdc4a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -14,6 +14,7 @@
 /dts-v1/;
 
 /include/ "zynqmp.dtsi"
+/include/ "zynqmp-ep108-clk.dtsi"
 
 / {
 	model = "ZynqMP EP108";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 857eda5c7217..e595f22e7e4b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -90,7 +90,7 @@
 		};
 	};
 
-	amba {
+	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
@@ -99,7 +99,6 @@
 		can0: can@ff060000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
-			clocks = <&misc_clk &misc_clk>;
 			clock-names = "can_clk", "pclk";
 			reg = <0x0 0xff060000 0x1000>;
 			interrupts = <0 23 4>;
@@ -111,7 +110,6 @@
 		can1: can@ff070000 {
 			compatible = "xlnx,zynq-can-1.0";
 			status = "disabled";
-			clocks = <&misc_clk &misc_clk>;
 			clock-names = "can_clk", "pclk";
 			reg = <0x0 0xff070000 0x1000>;
 			interrupts = <0 24 4>;
@@ -120,22 +118,6 @@
 			rx-fifo-depth = <0x40>;
 		};
 
-		misc_clk: misc_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		gpio: gpio@ff0a0000 {
-			compatible = "xlnx,zynqmp-gpio-1.0";
-			status = "disabled";
-			#gpio-cells = <0x2>;
-			clocks = <&misc_clk>;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 4>;
-			reg = <0x0 0xff0a0000 0x1000>;
-		};
-
 		gem0: ethernet@ff0b0000 {
 			compatible = "cdns,gem";
 			status = "disabled";
@@ -143,7 +125,6 @@
 			interrupts = <0 57 4>, <0 57 4>;
 			reg = <0x0 0xff0b0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -155,7 +136,6 @@
 			interrupts = <0 59 4>, <0 59 4>;
 			reg = <0x0 0xff0c0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -167,7 +147,6 @@
 			interrupts = <0 61 4>, <0 61 4>;
 			reg = <0x0 0xff0d0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -179,15 +158,19 @@
 			interrupts = <0 63 4>, <0 63 4>;
 			reg = <0x0 0xff0e0000 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk";
-			clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		i2c_clk: i2c_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0x0>;
-			clock-frequency = <111111111>;
+		gpio: gpio@ff0a0000 {
+			compatible = "xlnx,zynqmp-gpio-1.0";
+			status = "disabled";
+			#gpio-cells = <0x2>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0xff0a0000 0x1000>;
 		};
 
 		i2c0: i2c@ff020000 {
@@ -196,7 +179,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 17 4>;
 			reg = <0x0 0xff020000 0x1000>;
-			clocks = <&i2c_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -207,24 +189,16 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 18 4>;
 			reg = <0x0 0xff030000 0x1000>;
-			clocks = <&i2c_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		sata_clk: sata_clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <75000000>;
-		};
-
 		sata: ahci@fd0c0000 {
 			compatible = "ceva,ahci-1v84";
 			status = "disabled";
 			reg = <0x0 0xfd0c0000 0x2000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
-			clocks = <&sata_clk>;
 		};
 
 		sdhci0: sdhci@ff160000 {
@@ -234,7 +208,6 @@
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		sdhci1: sdhci@ff170000 {
@@ -244,7 +217,6 @@
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		smmu: smmu@fd800000 {
@@ -266,7 +238,6 @@
 			interrupts = <0 19 4>;
 			reg = <0x0 0xff040000 0x1000>;
 			clock-names = "ref_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -278,7 +249,6 @@
 			interrupts = <0 20 4>;
 			reg = <0x0 0xff050000 0x1000>;
 			clock-names = "ref_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
@@ -289,7 +259,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
 			reg = <0x0 0xff110000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -299,7 +268,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
 			reg = <0x0 0xff120000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -309,7 +277,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
 			reg = <0x0 0xff130000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -319,7 +286,6 @@
 			interrupt-parent = <&gic>;
 			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
 			reg = <0x0 0xff140000 0x1000>;
-			clocks = <&misc_clk>;
 			timer-width = <32>;
 		};
 
@@ -330,7 +296,6 @@
 			interrupts = <0 21 4>;
 			reg = <0x0 0xff000000 0x1000>;
 			clock-names = "uart_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 		};
 
 		uart1: serial@ff010000 {
@@ -340,7 +305,6 @@
 			interrupts = <0 22 4>;
 			reg = <0x0 0xff010000 0x1000>;
 			clock-names = "uart_clk", "pclk";
-			clocks = <&misc_clk &misc_clk>;
 		};
 
 		usb0: usb@fe200000 {
@@ -350,7 +314,6 @@
 			interrupts = <0 65 4>;
 			reg = <0x0 0xfe200000 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		usb1: usb@fe300000 {
@@ -360,13 +323,11 @@
 			interrupts = <0 70 4>;
 			reg = <0x0 0xfe300000 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&misc_clk>, <&misc_clk>;
 		};
 
 		watchdog0: watchdog@fd4d0000 {
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
-			clocks= <&misc_clk>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 52 1>;
 			reg = <0x0 0xfd4d0000 0x1000>;
diff --git a/arch/arm64/boot/install.sh b/arch/arm64/boot/install.sh
index 12ed78aa6f0c..d91e1f022573 100644
--- a/arch/arm64/boot/install.sh
+++ b/arch/arm64/boot/install.sh
@@ -20,6 +20,20 @@
 #   $4 - default install path (blank if root directory)
 #
 
+verify () {
+	if [ ! -f "$1" ]; then
+		echo ""                                                   1>&2
+		echo " *** Missing file: $1"                              1>&2
+		echo ' *** You need to run "make" before "make install".' 1>&2
+		echo ""                                                   1>&2
+		exit 1
+	fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
 # User may have a custom install script
 if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
 if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5f760347aee2..a44ef995d8ae 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -16,7 +16,6 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
 CONFIG_CGROUP_HUGETLB=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
@@ -31,36 +30,51 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_BCM_IPROC=y
 CONFIG_ARCH_BERLIN=y
-CONFIG_ARCH_EXYNOS7=y
-CONFIG_ARCH_FSL_LS2085A=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_LAYERSCAPE=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_STRATIX10=y
 CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_TEGRA_132_SOC=y
-CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_SPRD=y
 CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_UNIPHIER=y
 CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_VULCAN=y
 CONFIG_ARCH_XGENE=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
+CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
-CONFIG_SMP=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
 CONFIG_SCHED_MC=y
 CONFIG_PREEMPT=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
-CONFIG_CMDLINE="console=ttyAMA0"
+CONFIG_XEN=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
+CONFIG_CPU_FREQ=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
+CONFIG_ARM_SCPI_CPUFREQ=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -68,13 +82,11 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 CONFIG_BPF_JIT=y
 # CONFIG_WIRELESS is not set
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
-# CONFIG_TEGRA_AHB is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -88,16 +100,24 @@ CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
 CONFIG_AHCI_XGENE=y
+CONFIG_SATA_RCAR=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
+CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGBVF=y
 CONFIG_SKY2=y
+CONFIG_RAVB=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
+CONFIG_MICREL_PHY=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
@@ -108,73 +128,144 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=11
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_QUP=y
+CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER_F=y
+CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
+CONFIG_SPI_QUP=y
+CONFIG_SPMI=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
 CONFIG_GPIO_XGENE=y
+CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
+CONFIG_EXYNOS_THERMAL=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_SEC_CORE=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_S2MPS11=y
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_RCAR=y
+CONFIG_SND_SOC_AK4613=y
 CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_MSM_OTG=y
 CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
 CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
-CONFIG_MMC_DW_PLTFM=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
+CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_XGENE=y
+CONFIG_DMADEVICES=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_RCAR_DMAC=y
+CONFIG_VFIO=y
+CONFIG_VFIO_PCI=y
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_MSM_GCC_8916=y
-# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_MAILBOX=y
+CONFIG_ARM_MHU=y
+CONFIG_HI6220_MBOX=y
+CONFIG_ARM_SMMU=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_COMMON_RESET_HI6220=y
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_XGENE=y
+CONFIG_ARM_SCPI_PROTOCOL=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
@@ -184,8 +275,9 @@ CONFIG_CUSE=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_EFIVAR_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_SQUASHFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
@@ -194,6 +286,7 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=y
+CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
@@ -204,6 +297,7 @@ CONFIG_LOCKUP_DETECTOR=y
 # CONFIG_FTRACE is not set
 CONFIG_MEMTEST=y
 CONFIG_SECURITY=y
+CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_ARM64_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
@@ -212,3 +306,4 @@ CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
+CONFIG_CRYPTO_CRC32_ARM64=y
diff --git a/arch/arm64/crypto/aes-ce-cipher.c b/arch/arm64/crypto/aes-ce-cipher.c
index ce47792a983d..f7bd9bf0bbb3 100644
--- a/arch/arm64/crypto/aes-ce-cipher.c
+++ b/arch/arm64/crypto/aes-ce-cipher.c
@@ -237,7 +237,7 @@ EXPORT_SYMBOL(ce_aes_setkey);
 static struct crypto_alg aes_alg = {
 	.cra_name		= "aes",
 	.cra_driver_name	= "aes-ce",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
 	.cra_blocksize		= AES_BLOCK_SIZE,
 	.cra_ctxsize		= sizeof(struct crypto_aes_ctx),
diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
index 05d9e16c0dfd..5c888049d061 100644
--- a/arch/arm64/crypto/aes-glue.c
+++ b/arch/arm64/crypto/aes-glue.c
@@ -15,6 +15,7 @@
 #include <crypto/algapi.h>
 #include <linux/module.h>
 #include <linux/cpufeature.h>
+#include <crypto/xts.h>
 
 #include "aes-ce-setkey.h"
 
@@ -85,6 +86,10 @@ static int xts_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 	struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
 	int ret;
 
+	ret = xts_check_key(tfm, in_key, key_len);
+	if (ret)
+		return ret;
+
 	ret = aes_expandkey(&ctx->key1, in_key, key_len / 2);
 	if (!ret)
 		ret = aes_expandkey(&ctx->key2, &in_key[key_len / 2],
@@ -294,7 +299,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_blkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= aes_setkey,
 		.encrypt	= ecb_encrypt,
 		.decrypt	= ecb_decrypt,
@@ -371,7 +376,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_ablkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ablk_set_key,
 		.encrypt	= ablk_encrypt,
 		.decrypt	= ablk_decrypt,
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index 70fd9ffb58cf..cff532a6744e 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -1,5 +1,3 @@
-
-
 generic-y += bug.h
 generic-y += bugs.h
 generic-y += checksum.h
@@ -31,7 +29,6 @@ generic-y += msgbuf.h
 generic-y += msi.h
 generic-y += mutex.h
 generic-y += pci.h
-generic-y += pci-bridge.h
 generic-y += poll.h
 generic-y += preempt.h
 generic-y += resource.h
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index caafd63b8092..aee323b13802 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -87,9 +87,26 @@ void __init acpi_init_cpus(void);
 static inline void acpi_init_cpus(void) { }
 #endif /* CONFIG_ACPI */
 
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+bool acpi_parking_protocol_valid(int cpu);
+void __init
+acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor);
+#else
+static inline bool acpi_parking_protocol_valid(int cpu) { return false; }
+static inline void
+acpi_set_mailbox_entry(int cpu, struct acpi_madt_generic_interrupt *processor)
+{}
+#endif
+
 static inline const char *acpi_get_enable_method(int cpu)
 {
-	return acpi_psci_present() ? "psci" : NULL;
+	if (acpi_psci_present())
+		return "psci";
+
+	if (acpi_parking_protocol_valid(cpu))
+		return "parking-protocol";
+
+	return NULL;
 }
 
 #ifdef	CONFIG_ACPI_APEI
diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h
index d56ec0715157..beccbdefa106 100644
--- a/arch/arm64/include/asm/alternative.h
+++ b/arch/arm64/include/asm/alternative.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_ALTERNATIVE_H
 #define __ASM_ALTERNATIVE_H
 
+#include <asm/cpufeature.h>
+
 #ifndef __ASSEMBLY__
 
 #include <linux/init.h>
@@ -19,7 +21,6 @@ struct alt_instr {
 
 void __init apply_alternatives_all(void);
 void apply_alternatives(void *start, size_t length);
-void free_alternatives_memory(void);
 
 #define ALTINSTR_ENTRY(feature)						      \
 	" .word 661b - .\n"				/* label           */ \
@@ -64,6 +65,8 @@ void free_alternatives_memory(void);
 
 #else
 
+#include <asm/assembler.h>
+
 .macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len
 	.word \orig_offset - .
 	.word \alt_offset - .
@@ -137,6 +140,65 @@ void free_alternatives_memory(void);
 	alternative_insn insn1, insn2, cap, IS_ENABLED(cfg)
 
 
+/*
+ * Generate the assembly for UAO alternatives with exception table entries.
+ * This is complicated as there is no post-increment or pair versions of the
+ * unprivileged instructions, and USER() only works for single instructions.
+ */
+#ifdef CONFIG_ARM64_UAO
+	.macro uao_ldp l, reg1, reg2, addr, post_inc
+		alternative_if_not ARM64_HAS_UAO
+8888:			ldp	\reg1, \reg2, [\addr], \post_inc;
+8889:			nop;
+			nop;
+		alternative_else
+			ldtr	\reg1, [\addr];
+			ldtr	\reg2, [\addr, #8];
+			add	\addr, \addr, \post_inc;
+		alternative_endif
+
+		_asm_extable	8888b,\l;
+		_asm_extable	8889b,\l;
+	.endm
+
+	.macro uao_stp l, reg1, reg2, addr, post_inc
+		alternative_if_not ARM64_HAS_UAO
+8888:			stp	\reg1, \reg2, [\addr], \post_inc;
+8889:			nop;
+			nop;
+		alternative_else
+			sttr	\reg1, [\addr];
+			sttr	\reg2, [\addr, #8];
+			add	\addr, \addr, \post_inc;
+		alternative_endif
+
+		_asm_extable	8888b,\l;
+		_asm_extable	8889b,\l;
+	.endm
+
+	.macro uao_user_alternative l, inst, alt_inst, reg, addr, post_inc
+		alternative_if_not ARM64_HAS_UAO
+8888:			\inst	\reg, [\addr], \post_inc;
+			nop;
+		alternative_else
+			\alt_inst	\reg, [\addr];
+			add		\addr, \addr, \post_inc;
+		alternative_endif
+
+		_asm_extable	8888b,\l;
+	.endm
+#else
+	.macro uao_ldp l, reg1, reg2, addr, post_inc
+		USER(\l, ldp \reg1, \reg2, [\addr], \post_inc)
+	.endm
+	.macro uao_stp l, reg1, reg2, addr, post_inc
+		USER(\l, stp \reg1, \reg2, [\addr], \post_inc)
+	.endm
+	.macro uao_user_alternative l, inst, alt_inst, reg, addr, post_inc
+		USER(\l, \inst \reg, [\addr], \post_inc)
+	.endm
+#endif
+
 #endif  /*  __ASSEMBLY__  */
 
 /*
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 030cdcb46c6b..8ec88e5b290f 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -77,6 +77,7 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/stringify.h>
+#include <asm/barrier.h>
 
 /*
  * Low-level accessors
@@ -102,6 +103,7 @@ static inline u64 gic_read_iar_common(void)
 	u64 irqstat;
 
 	asm volatile("mrs_s %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
+	dsb(sy);
 	return irqstat;
 }
 
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 12eff928ef8b..70f7b9e04598 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -94,12 +94,19 @@
 	dmb	\opt
 	.endm
 
+/*
+ * Emit an entry into the exception table
+ */
+	.macro		_asm_extable, from, to
+	.pushsection	__ex_table, "a"
+	.align		3
+	.long		(\from - .), (\to - .)
+	.popsection
+	.endm
+
 #define USER(l, x...)				\
 9999:	x;					\
-	.section __ex_table,"a";		\
-	.align	3;				\
-	.quad	9999b,l;			\
-	.previous
+	_asm_extable	9999b, l
 
 /*
  * Register aliases.
@@ -193,6 +200,17 @@ lr	.req	x30		// link register
 	str	\src, [\tmp, :lo12:\sym]
 	.endm
 
+	/*
+	 * @sym: The name of the per-cpu variable
+	 * @reg: Result of per_cpu(sym, smp_processor_id())
+	 * @tmp: scratch register
+	 */
+	.macro this_cpu_ptr, sym, reg, tmp
+	adr_l	\reg, \sym
+	mrs	\tmp, tpidr_el1
+	add	\reg, \reg, \tmp
+	.endm
+
 /*
  * Annotate a function as position independent, i.e., safe to be called before
  * the kernel virtual mapping is activated.
@@ -204,4 +222,15 @@ lr	.req	x30		// link register
 	.size	__pi_##x, . - x;	\
 	ENDPROC(x)
 
+	/*
+	 * Emit a 64-bit absolute little endian symbol reference in a way that
+	 * ensures that it will be resolved at build time, even when building a
+	 * PIE binary. This requires cooperation from the linker script, which
+	 * must emit the lo32/hi32 halves individually.
+	 */
+	.macro	le64sym, sym
+	.long	\sym\()_lo32
+	.long	\sym\()_hi32
+	.endm
+
 #endif	/* __ASM_ASSEMBLER_H */
diff --git a/arch/arm64/include/asm/atomic_ll_sc.h b/arch/arm64/include/asm/atomic_ll_sc.h
index 74d0b8eb0799..f61c84f6ba02 100644
--- a/arch/arm64/include/asm/atomic_ll_sc.h
+++ b/arch/arm64/include/asm/atomic_ll_sc.h
@@ -233,7 +233,7 @@ __CMPXCHG_CASE( ,  ,  mb_8, dmb ish,  , l, "memory")
 #undef __CMPXCHG_CASE
 
 #define __CMPXCHG_DBL(name, mb, rel, cl)				\
-__LL_SC_INLINE int							\
+__LL_SC_INLINE long							\
 __LL_SC_PREFIX(__cmpxchg_double##name(unsigned long old1,		\
 				      unsigned long old2,		\
 				      unsigned long new1,		\
diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h
index 1fce7908e690..39c1d340fec5 100644
--- a/arch/arm64/include/asm/atomic_lse.h
+++ b/arch/arm64/include/asm/atomic_lse.h
@@ -36,7 +36,7 @@ static inline void atomic_andnot(int i, atomic_t *v)
 	"	stclr	%w[i], %[v]\n")
 	: [i] "+r" (w0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic_or(int i, atomic_t *v)
@@ -48,7 +48,7 @@ static inline void atomic_or(int i, atomic_t *v)
 	"	stset	%w[i], %[v]\n")
 	: [i] "+r" (w0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic_xor(int i, atomic_t *v)
@@ -60,7 +60,7 @@ static inline void atomic_xor(int i, atomic_t *v)
 	"	steor	%w[i], %[v]\n")
 	: [i] "+r" (w0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic_add(int i, atomic_t *v)
@@ -72,7 +72,7 @@ static inline void atomic_add(int i, atomic_t *v)
 	"	stadd	%w[i], %[v]\n")
 	: [i] "+r" (w0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 #define ATOMIC_OP_ADD_RETURN(name, mb, cl...)				\
@@ -90,7 +90,7 @@ static inline int atomic_add_return##name(int i, atomic_t *v)		\
 	"	add	%w[i], %w[i], w30")				\
 	: [i] "+r" (w0), [v] "+Q" (v->counter)				\
 	: "r" (x1)							\
-	: "x30" , ##cl);						\
+	: __LL_SC_CLOBBERS, ##cl);					\
 									\
 	return w0;							\
 }
@@ -116,7 +116,7 @@ static inline void atomic_and(int i, atomic_t *v)
 	"	stclr	%w[i], %[v]")
 	: [i] "+r" (w0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic_sub(int i, atomic_t *v)
@@ -133,7 +133,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 	"	stadd	%w[i], %[v]")
 	: [i] "+r" (w0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 #define ATOMIC_OP_SUB_RETURN(name, mb, cl...)				\
@@ -153,7 +153,7 @@ static inline int atomic_sub_return##name(int i, atomic_t *v)		\
 	"	add	%w[i], %w[i], w30")				\
 	: [i] "+r" (w0), [v] "+Q" (v->counter)				\
 	: "r" (x1)							\
-	: "x30" , ##cl);						\
+	: __LL_SC_CLOBBERS , ##cl);					\
 									\
 	return w0;							\
 }
@@ -177,7 +177,7 @@ static inline void atomic64_andnot(long i, atomic64_t *v)
 	"	stclr	%[i], %[v]\n")
 	: [i] "+r" (x0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic64_or(long i, atomic64_t *v)
@@ -189,7 +189,7 @@ static inline void atomic64_or(long i, atomic64_t *v)
 	"	stset	%[i], %[v]\n")
 	: [i] "+r" (x0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic64_xor(long i, atomic64_t *v)
@@ -201,7 +201,7 @@ static inline void atomic64_xor(long i, atomic64_t *v)
 	"	steor	%[i], %[v]\n")
 	: [i] "+r" (x0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic64_add(long i, atomic64_t *v)
@@ -213,7 +213,7 @@ static inline void atomic64_add(long i, atomic64_t *v)
 	"	stadd	%[i], %[v]\n")
 	: [i] "+r" (x0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 #define ATOMIC64_OP_ADD_RETURN(name, mb, cl...)				\
@@ -231,7 +231,7 @@ static inline long atomic64_add_return##name(long i, atomic64_t *v)	\
 	"	add	%[i], %[i], x30")				\
 	: [i] "+r" (x0), [v] "+Q" (v->counter)				\
 	: "r" (x1)							\
-	: "x30" , ##cl);						\
+	: __LL_SC_CLOBBERS, ##cl);					\
 									\
 	return x0;							\
 }
@@ -257,7 +257,7 @@ static inline void atomic64_and(long i, atomic64_t *v)
 	"	stclr	%[i], %[v]")
 	: [i] "+r" (x0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 static inline void atomic64_sub(long i, atomic64_t *v)
@@ -274,7 +274,7 @@ static inline void atomic64_sub(long i, atomic64_t *v)
 	"	stadd	%[i], %[v]")
 	: [i] "+r" (x0), [v] "+Q" (v->counter)
 	: "r" (x1)
-	: "x30");
+	: __LL_SC_CLOBBERS);
 }
 
 #define ATOMIC64_OP_SUB_RETURN(name, mb, cl...)				\
@@ -294,7 +294,7 @@ static inline long atomic64_sub_return##name(long i, atomic64_t *v)	\
 	"	add	%[i], %[i], x30")				\
 	: [i] "+r" (x0), [v] "+Q" (v->counter)				\
 	: "r" (x1)							\
-	: "x30" , ##cl);						\
+	: __LL_SC_CLOBBERS, ##cl);					\
 									\
 	return x0;							\
 }
@@ -330,7 +330,7 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
 	"2:")
 	: [ret] "+&r" (x0), [v] "+Q" (v->counter)
 	:
-	: "x30", "cc", "memory");
+	: __LL_SC_CLOBBERS, "cc", "memory");
 
 	return x0;
 }
@@ -359,7 +359,7 @@ static inline unsigned long __cmpxchg_case_##name(volatile void *ptr,	\
 	"	mov	%" #w "[ret], " #w "30")			\
 	: [ret] "+r" (x0), [v] "+Q" (*(unsigned long *)ptr)		\
 	: [old] "r" (x1), [new] "r" (x2)				\
-	: "x30" , ##cl);						\
+	: __LL_SC_CLOBBERS, ##cl);					\
 									\
 	return x0;							\
 }
@@ -387,7 +387,7 @@ __CMPXCHG_CASE(x,  ,  mb_8, al, "memory")
 #define __LL_SC_CMPXCHG_DBL(op)	__LL_SC_CALL(__cmpxchg_double##op)
 
 #define __CMPXCHG_DBL(name, mb, cl...)					\
-static inline int __cmpxchg_double##name(unsigned long old1,		\
+static inline long __cmpxchg_double##name(unsigned long old1,		\
 					 unsigned long old2,		\
 					 unsigned long new1,		\
 					 unsigned long new2,		\
@@ -416,7 +416,7 @@ static inline int __cmpxchg_double##name(unsigned long old1,		\
 	  [v] "+Q" (*(unsigned long *)ptr)				\
 	: [new1] "r" (x2), [new2] "r" (x3), [ptr] "r" (x4),		\
 	  [oldval1] "r" (oldval1), [oldval2] "r" (oldval2)		\
-	: "x30" , ##cl);						\
+	: __LL_SC_CLOBBERS, ##cl);					\
 									\
 	return x0;							\
 }
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index 624f9679f4b0..dae5c49618db 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -35,11 +35,11 @@
 #define dma_rmb()	dmb(oshld)
 #define dma_wmb()	dmb(oshst)
 
-#define smp_mb()	dmb(ish)
-#define smp_rmb()	dmb(ishld)
-#define smp_wmb()	dmb(ishst)
+#define __smp_mb()	dmb(ish)
+#define __smp_rmb()	dmb(ishld)
+#define __smp_wmb()	dmb(ishst)
 
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)						\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
 	switch (sizeof(*p)) {						\
@@ -62,39 +62,36 @@ do {									\
 	}								\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
-	typeof(*p) ___p1;						\
+	union { typeof(*p) __val; char __c[1]; } __u;			\
 	compiletime_assert_atomic_type(*p);				\
 	switch (sizeof(*p)) {						\
 	case 1:								\
 		asm volatile ("ldarb %w0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u8 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	case 2:								\
 		asm volatile ("ldarh %w0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u16 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	case 4:								\
 		asm volatile ("ldar %w0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u32 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	case 8:								\
 		asm volatile ("ldar %0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u64 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	}								\
-	___p1;								\
+	__u.__val;							\
 })
 
-#define read_barrier_depends()		do { } while(0)
-#define smp_read_barrier_depends()	do { } while(0)
-
-#define smp_store_mb(var, value)	do { WRITE_ONCE(var, value); smp_mb(); } while (0)
-#define nop()		asm volatile("nop");
-
-#define smp_mb__before_atomic()	smp_mb()
-#define smp_mb__after_atomic()	smp_mb()
+#include <asm-generic/barrier.h>
 
 #endif	/* __ASSEMBLY__ */
 
diff --git a/arch/arm64/include/asm/boot.h b/arch/arm64/include/asm/boot.h
index 81151b67b26b..ebf2481889c3 100644
--- a/arch/arm64/include/asm/boot.h
+++ b/arch/arm64/include/asm/boot.h
@@ -11,4 +11,10 @@
 #define MIN_FDT_ALIGN		8
 #define MAX_FDT_SIZE		SZ_2M
 
+/*
+ * arm64 requires the kernel image to placed
+ * TEXT_OFFSET bytes beyond a 2 MB aligned base
+ */
+#define MIN_KIMG_ALIGN		SZ_2M
+
 #endif
diff --git a/arch/arm64/include/asm/brk-imm.h b/arch/arm64/include/asm/brk-imm.h
new file mode 100644
index 000000000000..ed693c5bcec0
--- /dev/null
+++ b/arch/arm64/include/asm/brk-imm.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_BRK_IMM_H
+#define __ASM_BRK_IMM_H
+
+/*
+ * #imm16 values used for BRK instruction generation
+ * Allowed values for kgdb are 0x400 - 0x7ff
+ * 0x100: for triggering a fault on purpose (reserved)
+ * 0x400: for dynamic BRK instruction
+ * 0x401: for compile time BRK instruction
+ * 0x800: kernel-mode BUG() and WARN() traps
+ */
+#define FAULT_BRK_IMM			0x100
+#define KGDB_DYN_DBG_BRK_IMM		0x400
+#define KGDB_COMPILED_DBG_BRK_IMM	0x401
+#define BUG_BRK_IMM			0x800
+
+#endif
diff --git a/arch/arm64/include/asm/bug.h b/arch/arm64/include/asm/bug.h
index 4a748ce9ba1a..561190d15881 100644
--- a/arch/arm64/include/asm/bug.h
+++ b/arch/arm64/include/asm/bug.h
@@ -18,7 +18,7 @@
 #ifndef _ARCH_ARM64_ASM_BUG_H
 #define _ARCH_ARM64_ASM_BUG_H
 
-#include <asm/debug-monitors.h>
+#include <asm/brk-imm.h>
 
 #ifdef CONFIG_GENERIC_BUG
 #define HAVE_ARCH_BUG
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index 54efedaf331f..c64268dbff64 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -68,6 +68,7 @@
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
 extern void flush_icache_range(unsigned long start, unsigned long end);
 extern void __flush_dcache_area(void *addr, size_t len);
+extern void __clean_dcache_area_pou(void *addr, size_t len);
 extern long __flush_cache_user_range(unsigned long start, unsigned long end);
 
 static inline void flush_cache_mm(struct mm_struct *mm)
@@ -115,13 +116,6 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
 
-static inline void __local_flush_icache_all(void)
-{
-	asm("ic iallu");
-	dsb(nsh);
-	isb();
-}
-
 static inline void __flush_icache_all(void)
 {
 	asm("ic	ialluis");
@@ -155,8 +149,4 @@ int set_memory_rw(unsigned long addr, int numpages);
 int set_memory_x(unsigned long addr, int numpages);
 int set_memory_nx(unsigned long addr, int numpages);
 
-#ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
-#endif
-
 #endif
diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index 9ea611ea69df..510c7b404454 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -19,7 +19,6 @@
 #define __ASM_CMPXCHG_H
 
 #include <linux/bug.h>
-#include <linux/mmdebug.h>
 
 #include <asm/atomic.h>
 #include <asm/barrier.h>
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index 7fbed6919b54..eb8432bb82b8 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -23,7 +23,6 @@
  */
 #include <linux/types.h>
 #include <linux/sched.h>
-#include <linux/ptrace.h>
 
 #define COMPAT_USER_HZ		100
 #ifdef __AARCH64EB__
@@ -234,7 +233,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs()))
+#define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
 
 static inline void __user *arch_compat_alloc_user_space(long len)
 {
diff --git a/arch/arm64/include/asm/cpu.h b/arch/arm64/include/asm/cpu.h
index b5e9cee4b5f8..13a6103130cd 100644
--- a/arch/arm64/include/asm/cpu.h
+++ b/arch/arm64/include/asm/cpu.h
@@ -36,6 +36,7 @@ struct cpuinfo_arm64 {
 	u64		reg_id_aa64isar1;
 	u64		reg_id_aa64mmfr0;
 	u64		reg_id_aa64mmfr1;
+	u64		reg_id_aa64mmfr2;
 	u64		reg_id_aa64pfr0;
 	u64		reg_id_aa64pfr1;
 
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 11d5bb0fdd54..b9b649422fca 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -29,8 +29,14 @@
 #define ARM64_HAS_PAN				4
 #define ARM64_HAS_LSE_ATOMICS			5
 #define ARM64_WORKAROUND_CAVIUM_23154		6
+#define ARM64_WORKAROUND_834220			7
+#define ARM64_HAS_NO_HW_PREFETCH		8
+#define ARM64_HAS_UAO				9
+#define ARM64_ALT_PAN_NOT_UAO			10
+#define ARM64_HAS_VIRT_HOST_EXTN		11
+#define ARM64_WORKAROUND_CAVIUM_27456		12
 
-#define ARM64_NCAPS				7
+#define ARM64_NCAPS				13
 
 #ifndef __ASSEMBLY__
 
@@ -46,8 +52,12 @@ enum ftr_type {
 #define FTR_STRICT	true	/* SANITY check strict matching required */
 #define FTR_NONSTRICT	false	/* SANITY check ignored */
 
+#define FTR_SIGNED	true	/* Value should be treated as signed */
+#define FTR_UNSIGNED	false	/* Value should be treated as unsigned */
+
 struct arm64_ftr_bits {
-	bool		strict;	  /* CPU Sanity check: strict matching required ? */
+	bool		sign;	/* Value is signed ? */
+	bool		strict;	/* CPU Sanity check: strict matching required ? */
 	enum ftr_type	type;
 	u8		shift;
 	u8		width;
@@ -80,9 +90,10 @@ struct arm64_cpu_capabilities {
 
 		struct {	/* Feature register checking */
 			u32 sys_reg;
-			int field_pos;
-			int min_field_value;
-			int hwcap_type;
+			u8 field_pos;
+			u8 min_field_value;
+			u8 hwcap_type;
+			bool sign;
 			unsigned long hwcap;
 		};
 	};
@@ -112,15 +123,27 @@ static inline void cpus_set_cap(unsigned int num)
 }
 
 static inline int __attribute_const__
-cpuid_feature_extract_field_width(u64 features, int field, int width)
+cpuid_feature_extract_signed_field_width(u64 features, int field, int width)
 {
 	return (s64)(features << (64 - width - field)) >> (64 - width);
 }
 
 static inline int __attribute_const__
-cpuid_feature_extract_field(u64 features, int field)
+cpuid_feature_extract_signed_field(u64 features, int field)
+{
+	return cpuid_feature_extract_signed_field_width(features, field, 4);
+}
+
+static inline unsigned int __attribute_const__
+cpuid_feature_extract_unsigned_field_width(u64 features, int field, int width)
+{
+	return (u64)(features << (64 - width - field)) >> (64 - width);
+}
+
+static inline unsigned int __attribute_const__
+cpuid_feature_extract_unsigned_field(u64 features, int field)
 {
-	return cpuid_feature_extract_field_width(features, field, 4);
+	return cpuid_feature_extract_unsigned_field_width(features, field, 4);
 }
 
 static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
@@ -128,15 +151,23 @@ static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp)
 	return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift);
 }
 
+static inline int __attribute_const__
+cpuid_feature_extract_field(u64 features, int field, bool sign)
+{
+	return (sign) ?
+		cpuid_feature_extract_signed_field(features, field) :
+		cpuid_feature_extract_unsigned_field(features, field);
+}
+
 static inline s64 arm64_ftr_value(struct arm64_ftr_bits *ftrp, u64 val)
 {
-	return cpuid_feature_extract_field_width(val, ftrp->shift, ftrp->width);
+	return (s64)cpuid_feature_extract_field(val, ftrp->shift, ftrp->sign);
 }
 
 static inline bool id_aa64mmfr0_mixed_endian_el0(u64 mmfr0)
 {
-	return cpuid_feature_extract_field(mmfr0, ID_AA64MMFR0_BIGENDEL_SHIFT) == 0x1 ||
-		cpuid_feature_extract_field(mmfr0, ID_AA64MMFR0_BIGENDEL0_SHIFT) == 0x1;
+	return cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_BIGENDEL_SHIFT) == 0x1 ||
+		cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_BIGENDEL0_SHIFT) == 0x1;
 }
 
 void __init setup_cpu_features(void);
@@ -145,13 +176,7 @@ void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
 			    const char *info);
 void check_local_cpu_errata(void);
 
-#ifdef CONFIG_HOTPLUG_CPU
 void verify_local_cpu_capabilities(void);
-#else
-static inline void verify_local_cpu_capabilities(void)
-{
-}
-#endif
 
 u64 read_system_reg(u32 id);
 
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 1a5949364ed0..87e1985f3be8 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -32,12 +32,6 @@
 #define MPIDR_AFFINITY_LEVEL(mpidr, level) \
 	((mpidr >> MPIDR_LEVEL_SHIFT(level)) & MPIDR_LEVEL_MASK)
 
-#define read_cpuid(reg) ({						\
-	u64 __val;							\
-	asm("mrs	%0, " #reg : "=r" (__val));			\
-	__val;								\
-})
-
 #define MIDR_REVISION_MASK	0xf
 #define MIDR_REVISION(midr)	((midr) & MIDR_REVISION_MASK)
 #define MIDR_PARTNUM_SHIFT	4
@@ -57,14 +51,26 @@
 #define MIDR_IMPLEMENTOR(midr)	\
 	(((midr) & MIDR_IMPLEMENTOR_MASK) >> MIDR_IMPLEMENTOR_SHIFT)
 
-#define MIDR_CPU_PART(imp, partnum) \
+#define MIDR_CPU_MODEL(imp, partnum) \
 	(((imp)			<< MIDR_IMPLEMENTOR_SHIFT) | \
 	(0xf			<< MIDR_ARCHITECTURE_SHIFT) | \
 	((partnum)		<< MIDR_PARTNUM_SHIFT))
 
+#define MIDR_CPU_MODEL_MASK (MIDR_IMPLEMENTOR_MASK | MIDR_PARTNUM_MASK | \
+			     MIDR_ARCHITECTURE_MASK)
+
+#define MIDR_IS_CPU_MODEL_RANGE(midr, model, rv_min, rv_max)		\
+({									\
+	u32 _model = (midr) & MIDR_CPU_MODEL_MASK;			\
+	u32 rv = (midr) & (MIDR_REVISION_MASK | MIDR_VARIANT_MASK);	\
+									\
+	_model == (model) && rv >= (rv_min) && rv <= (rv_max);		\
+ })
+
 #define ARM_CPU_IMP_ARM			0x41
 #define ARM_CPU_IMP_APM			0x50
 #define ARM_CPU_IMP_CAVIUM		0x43
+#define ARM_CPU_IMP_BRCM		0x42
 
 #define ARM_CPU_PART_AEM_V8		0xD0F
 #define ARM_CPU_PART_FOUNDATION		0xD00
@@ -75,8 +81,22 @@
 
 #define CAVIUM_CPU_PART_THUNDERX	0x0A1
 
+#define BRCM_CPU_PART_VULCAN		0x516
+
+#define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
+#define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
+#define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
+
 #ifndef __ASSEMBLY__
 
+#include <asm/sysreg.h>
+
+#define read_cpuid(reg) ({						\
+	u64 __val;							\
+	asm("mrs_s	%0, " __stringify(SYS_ ## reg) : "=r" (__val));	\
+	__val;								\
+})
+
 /*
  * The CPU ID never changes at run time, so we might as well tell the
  * compiler that it's constant.  Use this function to read the CPU ID
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 279c85b5ec09..2fcb9b7c876c 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -20,6 +20,7 @@
 
 #include <linux/errno.h>
 #include <linux/types.h>
+#include <asm/brk-imm.h>
 #include <asm/esr.h>
 #include <asm/insn.h>
 #include <asm/ptrace.h>
@@ -47,19 +48,6 @@
 #define BREAK_INSTR_SIZE		AARCH64_INSN_SIZE
 
 /*
- * #imm16 values used for BRK instruction generation
- * Allowed values for kgbd are 0x400 - 0x7ff
- * 0x100: for triggering a fault on purpose (reserved)
- * 0x400: for dynamic BRK instruction
- * 0x401: for compile time BRK instruction
- * 0x800: kernel-mode BUG() and WARN() traps
- */
-#define FAULT_BRK_IMM			0x100
-#define KGDB_DYN_DBG_BRK_IMM		0x400
-#define KGDB_COMPILED_DBG_BRK_IMM	0x401
-#define BUG_BRK_IMM			0x800
-
-/*
  * BRK instruction encoding
  * The #imm16 value should be placed at bits[20:5] within BRK ins
  */
diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h
index 54d0ead41afc..ba437f090a74 100644
--- a/arch/arm64/include/asm/dma-mapping.h
+++ b/arch/arm64/include/asm/dma-mapping.h
@@ -18,7 +18,6 @@
 
 #ifdef __KERNEL__
 
-#include <linux/acpi.h>
 #include <linux/types.h>
 #include <linux/vmalloc.h>
 
@@ -26,22 +25,16 @@
 #include <asm/xen/hypervisor.h>
 
 #define DMA_ERROR_CODE	(~(dma_addr_t)0)
-extern struct dma_map_ops *dma_ops;
 extern struct dma_map_ops dummy_dma_ops;
 
 static inline struct dma_map_ops *__generic_dma_ops(struct device *dev)
 {
-	if (unlikely(!dev))
-		return dma_ops;
-	else if (dev->archdata.dma_ops)
+	if (dev && dev->archdata.dma_ops)
 		return dev->archdata.dma_ops;
-	else if (acpi_disabled)
-		return dma_ops;
 
 	/*
-	 * When ACPI is enabled, if arch_set_dma_ops is not called,
-	 * we will disable device DMA capability by setting it
-	 * to dummy_dma_ops.
+	 * We expect no ISA devices, and all other DMA masters are expected to
+	 * have someone call arch_setup_dma_ops at device creation time.
 	 */
 	return &dummy_dma_ops;
 }
@@ -71,8 +64,6 @@ static inline bool is_device_dma_coherent(struct device *dev)
 	return dev->archdata.dma_coherent;
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	return (dma_addr_t)paddr;
diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h
index ef572206f1c3..8e88a696c9cb 100644
--- a/arch/arm64/include/asm/efi.h
+++ b/arch/arm64/include/asm/efi.h
@@ -2,7 +2,9 @@
 #define _ASM_EFI_H
 
 #include <asm/io.h>
+#include <asm/mmu_context.h>
 #include <asm/neon.h>
+#include <asm/tlbflush.h>
 
 #ifdef CONFIG_EFI
 extern void efi_init(void);
@@ -10,6 +12,8 @@ extern void efi_init(void);
 #define efi_init()
 #endif
 
+int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
+
 #define efi_call_virt(f, ...)						\
 ({									\
 	efi_##f##_t *__f;						\
@@ -63,6 +67,11 @@ extern void efi_init(void);
  *   Services are enabled and the EFI_RUNTIME_SERVICES bit set.
  */
 
+static inline void efi_set_pgd(struct mm_struct *mm)
+{
+	switch_mm(NULL, mm, NULL);
+}
+
 void efi_virtmap_load(void);
 void efi_virtmap_unload(void);
 
diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index faad6df49e5b..24ed037f09fd 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -24,15 +24,6 @@
 #include <asm/ptrace.h>
 #include <asm/user.h>
 
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t))
-#define ELF_CORE_COPY_REGS(dest, regs)	\
-	*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
-
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-typedef struct user_fpsimd_state elf_fpregset_t;
-
 /*
  * AArch64 static relocation types.
  */
@@ -86,6 +77,8 @@ typedef struct user_fpsimd_state elf_fpregset_t;
 #define R_AARCH64_MOVW_PREL_G2_NC	292
 #define R_AARCH64_MOVW_PREL_G3		293
 
+#define R_AARCH64_RELATIVE		1027
+
 /*
  * These are used to set parameters in the core dumps.
  */
@@ -127,6 +120,17 @@ typedef struct user_fpsimd_state elf_fpregset_t;
  */
 #define ELF_ET_DYN_BASE	(2 * TASK_SIZE_64 / 3)
 
+#ifndef __ASSEMBLY__
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t))
+#define ELF_CORE_COPY_REGS(dest, regs)	\
+	*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
+
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+typedef struct user_fpsimd_state elf_fpregset_t;
+
 /*
  * When the program starts, a1 contains a pointer to a function to be
  * registered with atexit, as per the SVR4 ABI.  A value of 0 means we have no
@@ -186,4 +190,6 @@ extern int aarch32_setup_vectors_page(struct linux_binprm *bprm,
 
 #endif /* CONFIG_COMPAT */
 
+#endif /* !__ASSEMBLY__ */
+
 #endif
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index 6cb7e1a6bc02..0c2eec490abf 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -18,7 +18,7 @@
 #ifndef __ASM_EXCEPTION_H
 #define __ASM_EXCEPTION_H
 
-#include <linux/ftrace.h>
+#include <linux/interrupt.h>
 
 #define __exception	__attribute__((section(".exception.text")))
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h
index 309704544d22..caf86be815ba 100644
--- a/arch/arm64/include/asm/fixmap.h
+++ b/arch/arm64/include/asm/fixmap.h
@@ -20,6 +20,7 @@
 #include <linux/sizes.h>
 #include <asm/boot.h>
 #include <asm/page.h>
+#include <asm/pgtable-prot.h>
 
 /*
  * Here we define all the compile-time 'special' virtual
@@ -62,6 +63,16 @@ enum fixed_addresses {
 
 	FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
 	FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
+
+	/*
+	 * Used for kernel page table creation, so unmapped memory may be used
+	 * for tables.
+	 */
+	FIX_PTE,
+	FIX_PMD,
+	FIX_PUD,
+	FIX_PGD,
+
 	__end_of_fixed_addresses
 };
 
diff --git a/arch/arm64/include/asm/ftrace.h b/arch/arm64/include/asm/ftrace.h
index c5534facf941..caa955f10e19 100644
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@@ -28,6 +28,8 @@ struct dyn_arch_ftrace {
 
 extern unsigned long ftrace_graph_call;
 
+extern void return_to_handler(void);
+
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
 	/*
@@ -46,7 +48,7 @@ static inline unsigned long ftrace_call_adjust(unsigned long addr)
  * See kernel/trace/trace_syscalls.c
  *
  * x86 code says:
- * If the user realy wants these, then they should use the
+ * If the user really wants these, then they should use the
  * raw syscall tracepoints with filtering.
  */
 #define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS
diff --git a/arch/arm64/include/asm/futex.h b/arch/arm64/include/asm/futex.h
index 007a69fc4f40..f2585cdd32c2 100644
--- a/arch/arm64/include/asm/futex.h
+++ b/arch/arm64/include/asm/futex.h
@@ -42,10 +42,8 @@
 "4:	mov	%w0, %w5\n"						\
 "	b	3b\n"							\
 "	.popsection\n"							\
-"	.pushsection __ex_table,\"a\"\n"				\
-"	.align	3\n"							\
-"	.quad	1b, 4b, 2b, 4b\n"					\
-"	.popsection\n"							\
+	_ASM_EXTABLE(1b, 4b)						\
+	_ASM_EXTABLE(2b, 4b)						\
 	ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN,		\
 		    CONFIG_ARM64_PAN)					\
 	: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp)	\
@@ -121,6 +119,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 "	prfm	pstl1strm, %2\n"
 "1:	ldxr	%w1, %2\n"
 "	sub	%w3, %w1, %w4\n"
@@ -133,10 +132,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "4:	mov	%w0, %w6\n"
 "	b	3b\n"
 "	.popsection\n"
-"	.pushsection __ex_table,\"a\"\n"
-"	.align	3\n"
-"	.quad	1b, 4b, 2b, 4b\n"
-"	.popsection\n"
+	_ASM_EXTABLE(1b, 4b)
+	_ASM_EXTABLE(2b, 4b)
+ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
 	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
 	: "memory");
diff --git a/arch/arm64/include/asm/hardirq.h b/arch/arm64/include/asm/hardirq.h
index a57601f9d17c..8740297dac77 100644
--- a/arch/arm64/include/asm/hardirq.h
+++ b/arch/arm64/include/asm/hardirq.h
@@ -20,7 +20,7 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
-#define NR_IPI	5
+#define NR_IPI	6
 
 typedef struct {
 	unsigned int __softirq_pending;
diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h
index bb4052e85dba..bbc1e35aa601 100644
--- a/arch/arm64/include/asm/hugetlb.h
+++ b/arch/arm64/include/asm/hugetlb.h
@@ -26,36 +26,7 @@ static inline pte_t huge_ptep_get(pte_t *ptep)
 	return *ptep;
 }
 
-static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
-				   pte_t *ptep, pte_t pte)
-{
-	set_pte_at(mm, addr, ptep, pte);
-}
-
-static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
-					 unsigned long addr, pte_t *ptep)
-{
-	ptep_clear_flush(vma, addr, ptep);
-}
-
-static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
-					   unsigned long addr, pte_t *ptep)
-{
-	ptep_set_wrprotect(mm, addr, ptep);
-}
 
-static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
-					    unsigned long addr, pte_t *ptep)
-{
-	return ptep_get_and_clear(mm, addr, ptep);
-}
-
-static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
-					     unsigned long addr, pte_t *ptep,
-					     pte_t pte, int dirty)
-{
-	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
-}
 
 static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 					  unsigned long addr, unsigned long end,
@@ -97,4 +68,19 @@ static inline void arch_clear_hugepage_flags(struct page *page)
 	clear_bit(PG_dcache_clean, &page->flags);
 }
 
+extern pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
+				struct page *page, int writable);
+#define arch_make_huge_pte arch_make_huge_pte
+extern void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, pte_t pte);
+extern int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+				      unsigned long addr, pte_t *ptep,
+				      pte_t pte, int dirty);
+extern pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+				     unsigned long addr, pte_t *ptep);
+extern void huge_ptep_set_wrprotect(struct mm_struct *mm,
+				    unsigned long addr, pte_t *ptep);
+extern void huge_ptep_clear_flush(struct vm_area_struct *vma,
+				  unsigned long addr, pte_t *ptep);
+
 #endif /* __ASM_HUGETLB_H */
diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h
index e54415ec6935..115ea2a64520 100644
--- a/arch/arm64/include/asm/hw_breakpoint.h
+++ b/arch/arm64/include/asm/hw_breakpoint.h
@@ -18,6 +18,7 @@
 
 #include <asm/cputype.h>
 #include <asm/cpufeature.h>
+#include <asm/virt.h>
 
 #ifdef __KERNEL__
 
@@ -35,10 +36,21 @@ struct arch_hw_breakpoint {
 	struct arch_hw_breakpoint_ctrl ctrl;
 };
 
+/* Privilege Levels */
+#define AARCH64_BREAKPOINT_EL1	1
+#define AARCH64_BREAKPOINT_EL0	2
+
+#define DBG_HMC_HYP		(1 << 13)
+
 static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
 {
-	return (ctrl.len << 5) | (ctrl.type << 3) | (ctrl.privilege << 1) |
+	u32 val = (ctrl.len << 5) | (ctrl.type << 3) | (ctrl.privilege << 1) |
 		ctrl.enabled;
+
+	if (is_kernel_in_hyp_mode() && ctrl.privilege == AARCH64_BREAKPOINT_EL1)
+		val |= DBG_HMC_HYP;
+
+	return val;
 }
 
 static inline void decode_ctrl_reg(u32 reg,
@@ -61,10 +73,6 @@ static inline void decode_ctrl_reg(u32 reg,
 #define ARM_BREAKPOINT_STORE	2
 #define AARCH64_ESR_ACCESS_MASK	(1 << 6)
 
-/* Privilege Levels */
-#define AARCH64_BREAKPOINT_EL1	1
-#define AARCH64_BREAKPOINT_EL0	2
-
 /* Lengths */
 #define ARM_BREAKPOINT_LEN_1	0x1
 #define ARM_BREAKPOINT_LEN_2	0x3
@@ -138,16 +146,18 @@ extern struct pmu perf_ops_bp;
 /* Determine number of BRP registers available. */
 static inline int get_num_brps(void)
 {
+	u64 dfr0 = read_system_reg(SYS_ID_AA64DFR0_EL1);
 	return 1 +
-		cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+		cpuid_feature_extract_unsigned_field(dfr0,
 						ID_AA64DFR0_BRPS_SHIFT);
 }
 
 /* Determine number of WRP registers available. */
 static inline int get_num_wrps(void)
 {
+	u64 dfr0 = read_system_reg(SYS_ID_AA64DFR0_EL1);
 	return 1 +
-		cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+		cpuid_feature_extract_unsigned_field(dfr0,
 						ID_AA64DFR0_WRPS_SHIFT);
 }
 
diff --git a/arch/arm64/include/asm/irq.h b/arch/arm64/include/asm/irq.h
index 23eb450b820b..b77197d941fc 100644
--- a/arch/arm64/include/asm/irq.h
+++ b/arch/arm64/include/asm/irq.h
@@ -1,10 +1,60 @@
 #ifndef __ASM_IRQ_H
 #define __ASM_IRQ_H
 
+#define IRQ_STACK_SIZE			THREAD_SIZE
+#define IRQ_STACK_START_SP		THREAD_START_SP
+
+#ifndef __ASSEMBLER__
+
+#include <linux/percpu.h>
+
 #include <asm-generic/irq.h>
+#include <asm/thread_info.h>
 
 struct pt_regs;
 
+DECLARE_PER_CPU(unsigned long [IRQ_STACK_SIZE/sizeof(long)], irq_stack);
+
+/*
+ * The highest address on the stack, and the first to be used. Used to
+ * find the dummy-stack frame put down by el?_irq() in entry.S, which
+ * is structured as follows:
+ *
+ *       ------------
+ *       |          |  <- irq_stack_ptr
+ *   top ------------
+ *       |   x19    | <- irq_stack_ptr - 0x08
+ *       ------------
+ *       |   x29    | <- irq_stack_ptr - 0x10
+ *       ------------
+ *
+ * where x19 holds a copy of the task stack pointer where the struct pt_regs
+ * from kernel_entry can be found.
+ *
+ */
+#define IRQ_STACK_PTR(cpu) ((unsigned long)per_cpu(irq_stack, cpu) + IRQ_STACK_START_SP)
+
+/*
+ * The offset from irq_stack_ptr where entry.S will store the original
+ * stack pointer. Used by unwind_frame() and dump_backtrace().
+ */
+#define IRQ_STACK_TO_TASK_STACK(ptr) (*((unsigned long *)((ptr) - 0x08)))
+
 extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 
+static inline int nr_legacy_irqs(void)
+{
+	return 0;
+}
+
+static inline bool on_irq_stack(unsigned long sp, int cpu)
+{
+	/* variable names the same as kernel/stacktrace.c */
+	unsigned long low = (unsigned long)per_cpu(irq_stack, cpu);
+	unsigned long high = low + IRQ_STACK_START_SP;
+
+	return (low <= sp && sp <= high);
+}
+
+#endif /* !__ASSEMBLER__ */
 #endif
diff --git a/arch/arm64/include/asm/kasan.h b/arch/arm64/include/asm/kasan.h
index 2774fa384c47..71ad0f93eb71 100644
--- a/arch/arm64/include/asm/kasan.h
+++ b/arch/arm64/include/asm/kasan.h
@@ -7,13 +7,14 @@
 
 #include <linux/linkage.h>
 #include <asm/memory.h>
+#include <asm/pgtable-types.h>
 
 /*
  * KASAN_SHADOW_START: beginning of the kernel virtual addresses.
  * KASAN_SHADOW_END: KASAN_SHADOW_START + 1/8 of kernel virtual addresses.
  */
 #define KASAN_SHADOW_START      (VA_START)
-#define KASAN_SHADOW_END        (KASAN_SHADOW_START + (1UL << (VA_BITS - 3)))
+#define KASAN_SHADOW_END        (KASAN_SHADOW_START + KASAN_SHADOW_SIZE)
 
 /*
  * This value is used to map an address to the corresponding shadow
@@ -28,10 +29,12 @@
 #define KASAN_SHADOW_OFFSET     (KASAN_SHADOW_END - (1ULL << (64 - 3)))
 
 void kasan_init(void);
+void kasan_copy_shadow(pgd_t *pgdir);
 asmlinkage void kasan_early_init(void);
 
 #else
 static inline void kasan_init(void) { }
+static inline void kasan_copy_shadow(pgd_t *pgdir) { }
 #endif
 
 #endif
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
index a459714ee29e..5c6375d8528b 100644
--- a/arch/arm64/include/asm/kernel-pgtable.h
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -79,5 +79,17 @@
 #define SWAPPER_MM_MMUFLAGS	(PTE_ATTRINDX(MT_NORMAL) | SWAPPER_PTE_FLAGS)
 #endif
 
+/*
+ * To make optimal use of block mappings when laying out the linear
+ * mapping, round down the base of physical memory to a size that can
+ * be mapped efficiently, i.e., either PUD_SIZE (4k granule) or PMD_SIZE
+ * (64k granule), or a multiple that can be mapped using contiguous bits
+ * in the page tables: 32 * PMD_SIZE (16k granule)
+ */
+#ifdef CONFIG_ARM64_64K_PAGES
+#define ARM64_MEMSTART_ALIGN	SZ_512M
+#else
+#define ARM64_MEMSTART_ALIGN	SZ_1G
+#endif
 
 #endif	/* __ASM_KERNEL_PGTABLE_H */
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 5e6857b6bdc4..3f29887995bc 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -23,6 +23,7 @@
 #include <asm/types.h>
 
 /* Hyp Configuration Register (HCR) bits */
+#define HCR_E2H		(UL(1) << 34)
 #define HCR_ID		(UL(1) << 33)
 #define HCR_CD		(UL(1) << 32)
 #define HCR_RW_SHIFT	31
@@ -61,7 +62,7 @@
 
 /*
  * The bits we set in HCR:
- * RW:		64bit by default, can be overriden for 32bit VMs
+ * RW:		64bit by default, can be overridden for 32bit VMs
  * TAC:		Trap ACTLR
  * TSC:		Trap SMC
  * TVM:		Trap VM ops (until M+C set in SCTLR_EL1)
@@ -81,7 +82,7 @@
 			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW)
 #define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF)
 #define HCR_INT_OVERRIDE   (HCR_FMO | HCR_IMO)
-
+#define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
 
 /* Hyp System Control Register (SCTLR_EL2) bits */
 #define SCTLR_EL2_EE	(1 << 25)
@@ -107,8 +108,6 @@
 #define TCR_EL2_MASK	(TCR_EL2_TG0 | TCR_EL2_SH0 | \
 			 TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ)
 
-#define TCR_EL2_FLAGS	(TCR_EL2_RES1 | TCR_EL2_PS_40B)
-
 /* VTCR_EL2 Registers bits */
 #define VTCR_EL2_RES1		(1 << 31)
 #define VTCR_EL2_PS_MASK	(7 << 16)
@@ -125,6 +124,9 @@
 #define VTCR_EL2_SL0_LVL1	(1 << 6)
 #define VTCR_EL2_T0SZ_MASK	0x3f
 #define VTCR_EL2_T0SZ_40B	24
+#define VTCR_EL2_VS_SHIFT	19
+#define VTCR_EL2_VS_8BIT	(0 << VTCR_EL2_VS_SHIFT)
+#define VTCR_EL2_VS_16BIT	(1 << VTCR_EL2_VS_SHIFT)
 
 /*
  * We configure the Stage-2 page tables to always restrict the IPA space to be
@@ -149,8 +151,7 @@
  */
 #define VTCR_EL2_FLAGS		(VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
 				 VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
-				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
-				 VTCR_EL2_RES1)
+				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
 #define VTTBR_X		(38 - VTCR_EL2_T0SZ_40B)
 #else
 /*
@@ -161,15 +162,14 @@
  */
 #define VTCR_EL2_FLAGS		(VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
 				 VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
-				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B | \
-				 VTCR_EL2_RES1)
+				 VTCR_EL2_SL0_LVL1 | VTCR_EL2_RES1)
 #define VTTBR_X		(37 - VTCR_EL2_T0SZ_40B)
 #endif
 
 #define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
 #define VTTBR_BADDR_MASK  (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
 #define VTTBR_VMID_SHIFT  (UL(48))
-#define VTTBR_VMID_MASK	  (UL(0xFF) << VTTBR_VMID_SHIFT)
+#define VTTBR_VMID_MASK(size) (_AT(u64, (1 << size) - 1) << VTTBR_VMID_SHIFT)
 
 /* Hyp System Trap Register */
 #define HSTR_EL2_T(x)	(1 << x)
@@ -181,6 +181,7 @@
 #define CPTR_EL2_TCPAC	(1 << 31)
 #define CPTR_EL2_TTA	(1 << 20)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
+#define CPTR_EL2_DEFAULT	0x000033ff
 
 /* Hyp Debug Configuration Register bits */
 #define MDCR_EL2_TDRA		(1 << 11)
@@ -216,4 +217,7 @@
 	ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \
 	ECN(BKPT32), ECN(VECTOR32), ECN(BRK64)
 
+#define CPACR_EL1_FPEN		(3 << 20)
+#define CPACR_EL1_TTA		(1 << 28)
+
 #endif /* __ARM64_KVM_ARM_H__ */
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 5e377101f919..40a0a24e6c98 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -20,88 +20,20 @@
 
 #include <asm/virt.h>
 
-/*
- * 0 is reserved as an invalid value.
- * Order *must* be kept in sync with the hyp switch code.
- */
-#define	MPIDR_EL1	1	/* MultiProcessor Affinity Register */
-#define	CSSELR_EL1	2	/* Cache Size Selection Register */
-#define	SCTLR_EL1	3	/* System Control Register */
-#define	ACTLR_EL1	4	/* Auxiliary Control Register */
-#define	CPACR_EL1	5	/* Coprocessor Access Control */
-#define	TTBR0_EL1	6	/* Translation Table Base Register 0 */
-#define	TTBR1_EL1	7	/* Translation Table Base Register 1 */
-#define	TCR_EL1		8	/* Translation Control Register */
-#define	ESR_EL1		9	/* Exception Syndrome Register */
-#define	AFSR0_EL1	10	/* Auxilary Fault Status Register 0 */
-#define	AFSR1_EL1	11	/* Auxilary Fault Status Register 1 */
-#define	FAR_EL1		12	/* Fault Address Register */
-#define	MAIR_EL1	13	/* Memory Attribute Indirection Register */
-#define	VBAR_EL1	14	/* Vector Base Address Register */
-#define	CONTEXTIDR_EL1	15	/* Context ID Register */
-#define	TPIDR_EL0	16	/* Thread ID, User R/W */
-#define	TPIDRRO_EL0	17	/* Thread ID, User R/O */
-#define	TPIDR_EL1	18	/* Thread ID, Privileged */
-#define	AMAIR_EL1	19	/* Aux Memory Attribute Indirection Register */
-#define	CNTKCTL_EL1	20	/* Timer Control Register (EL1) */
-#define	PAR_EL1		21	/* Physical Address Register */
-#define MDSCR_EL1	22	/* Monitor Debug System Control Register */
-#define MDCCINT_EL1	23	/* Monitor Debug Comms Channel Interrupt Enable Reg */
-
-/* 32bit specific registers. Keep them at the end of the range */
-#define	DACR32_EL2	24	/* Domain Access Control Register */
-#define	IFSR32_EL2	25	/* Instruction Fault Status Register */
-#define	FPEXC32_EL2	26	/* Floating-Point Exception Control Register */
-#define	DBGVCR32_EL2	27	/* Debug Vector Catch Register */
-#define	NR_SYS_REGS	28
-
-/* 32bit mapping */
-#define c0_MPIDR	(MPIDR_EL1 * 2)	/* MultiProcessor ID Register */
-#define c0_CSSELR	(CSSELR_EL1 * 2)/* Cache Size Selection Register */
-#define c1_SCTLR	(SCTLR_EL1 * 2)	/* System Control Register */
-#define c1_ACTLR	(ACTLR_EL1 * 2)	/* Auxiliary Control Register */
-#define c1_CPACR	(CPACR_EL1 * 2)	/* Coprocessor Access Control */
-#define c2_TTBR0	(TTBR0_EL1 * 2)	/* Translation Table Base Register 0 */
-#define c2_TTBR0_high	(c2_TTBR0 + 1)	/* TTBR0 top 32 bits */
-#define c2_TTBR1	(TTBR1_EL1 * 2)	/* Translation Table Base Register 1 */
-#define c2_TTBR1_high	(c2_TTBR1 + 1)	/* TTBR1 top 32 bits */
-#define c2_TTBCR	(TCR_EL1 * 2)	/* Translation Table Base Control R. */
-#define c3_DACR		(DACR32_EL2 * 2)/* Domain Access Control Register */
-#define c5_DFSR		(ESR_EL1 * 2)	/* Data Fault Status Register */
-#define c5_IFSR		(IFSR32_EL2 * 2)/* Instruction Fault Status Register */
-#define c5_ADFSR	(AFSR0_EL1 * 2)	/* Auxiliary Data Fault Status R */
-#define c5_AIFSR	(AFSR1_EL1 * 2)	/* Auxiliary Instr Fault Status R */
-#define c6_DFAR		(FAR_EL1 * 2)	/* Data Fault Address Register */
-#define c6_IFAR		(c6_DFAR + 1)	/* Instruction Fault Address Register */
-#define c7_PAR		(PAR_EL1 * 2)	/* Physical Address Register */
-#define c7_PAR_high	(c7_PAR + 1)	/* PAR top 32 bits */
-#define c10_PRRR	(MAIR_EL1 * 2)	/* Primary Region Remap Register */
-#define c10_NMRR	(c10_PRRR + 1)	/* Normal Memory Remap Register */
-#define c12_VBAR	(VBAR_EL1 * 2)	/* Vector Base Address Register */
-#define c13_CID		(CONTEXTIDR_EL1 * 2)	/* Context ID Register */
-#define c13_TID_URW	(TPIDR_EL0 * 2)	/* Thread ID, User R/W */
-#define c13_TID_URO	(TPIDRRO_EL0 * 2)/* Thread ID, User R/O */
-#define c13_TID_PRIV	(TPIDR_EL1 * 2)	/* Thread ID, Privileged */
-#define c10_AMAIR0	(AMAIR_EL1 * 2)	/* Aux Memory Attr Indirection Reg */
-#define c10_AMAIR1	(c10_AMAIR0 + 1)/* Aux Memory Attr Indirection Reg */
-#define c14_CNTKCTL	(CNTKCTL_EL1 * 2) /* Timer Control Register (PL1) */
-
-#define cp14_DBGDSCRext	(MDSCR_EL1 * 2)
-#define cp14_DBGBCR0	(DBGBCR0_EL1 * 2)
-#define cp14_DBGBVR0	(DBGBVR0_EL1 * 2)
-#define cp14_DBGBXVR0	(cp14_DBGBVR0 + 1)
-#define cp14_DBGWCR0	(DBGWCR0_EL1 * 2)
-#define cp14_DBGWVR0	(DBGWVR0_EL1 * 2)
-#define cp14_DBGDCCINT	(MDCCINT_EL1 * 2)
-
-#define NR_COPRO_REGS	(NR_SYS_REGS * 2)
-
 #define ARM_EXCEPTION_IRQ	  0
 #define ARM_EXCEPTION_TRAP	  1
 
 #define KVM_ARM64_DEBUG_DIRTY_SHIFT	0
 #define KVM_ARM64_DEBUG_DIRTY		(1 << KVM_ARM64_DEBUG_DIRTY_SHIFT)
 
+#define kvm_ksym_ref(sym)						\
+	({								\
+		void *val = &sym;					\
+		if (!is_kernel_in_hyp_mode())				\
+			val = phys_to_virt((u64)&sym - kimage_voffset);	\
+		val;							\
+	 })
+
 #ifndef __ASSEMBLY__
 struct kvm;
 struct kvm_vcpu;
@@ -111,9 +43,6 @@ extern char __kvm_hyp_init_end[];
 
 extern char __kvm_hyp_vector[];
 
-#define	__kvm_hyp_code_start	__hyp_text_start
-#define	__kvm_hyp_code_end	__hyp_text_end
-
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
@@ -121,9 +50,12 @@ extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
 
 extern u64 __vgic_v3_get_ich_vtr_el2(void);
+extern void __vgic_v3_init_lrs(void);
 
 extern u32 __kvm_get_mdcr_el2(void);
 
+extern u32 __init_stage2_translation(void);
+
 #endif
 
 #endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index 17e92f05b1fe..40bc1681b6d5 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -26,10 +26,10 @@
 
 #include <asm/esr.h>
 #include <asm/kvm_arm.h>
-#include <asm/kvm_asm.h>
 #include <asm/kvm_mmio.h>
 #include <asm/ptrace.h>
 #include <asm/cputype.h>
+#include <asm/virt.h>
 
 unsigned long *vcpu_reg32(const struct kvm_vcpu *vcpu, u8 reg_num);
 unsigned long *vcpu_spsr32(const struct kvm_vcpu *vcpu);
@@ -44,6 +44,8 @@ void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr);
 static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.hcr_el2 = HCR_GUEST_FLAGS;
+	if (is_kernel_in_hyp_mode())
+		vcpu->arch.hcr_el2 |= HCR_E2H;
 	if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
 		vcpu->arch.hcr_el2 &= ~HCR_RW;
 }
@@ -99,12 +101,22 @@ static inline void vcpu_set_thumb(struct kvm_vcpu *vcpu)
 	*vcpu_cpsr(vcpu) |= COMPAT_PSR_T_BIT;
 }
 
-static inline unsigned long *vcpu_reg(const struct kvm_vcpu *vcpu, u8 reg_num)
+/*
+ * vcpu_get_reg and vcpu_set_reg should always be passed a register number
+ * coming from a read of ESR_EL2. Otherwise, it may give the wrong result on
+ * AArch32 with banked registers.
+ */
+static inline unsigned long vcpu_get_reg(const struct kvm_vcpu *vcpu,
+					 u8 reg_num)
 {
-	if (vcpu_mode_is_32bit(vcpu))
-		return vcpu_reg32(vcpu, reg_num);
+	return (reg_num == 31) ? 0 : vcpu_gp_regs(vcpu)->regs.regs[reg_num];
+}
 
-	return (unsigned long *)&vcpu_gp_regs(vcpu)->regs.regs[reg_num];
+static inline void vcpu_set_reg(struct kvm_vcpu *vcpu, u8 reg_num,
+				unsigned long val)
+{
+	if (reg_num != 31)
+		vcpu_gp_regs(vcpu)->regs.regs[reg_num] = val;
 }
 
 /* Get vcpu SPSR for current mode */
@@ -118,10 +130,14 @@ static inline unsigned long *vcpu_spsr(const struct kvm_vcpu *vcpu)
 
 static inline bool vcpu_mode_priv(const struct kvm_vcpu *vcpu)
 {
-	u32 mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
+	u32 mode;
 
-	if (vcpu_mode_is_32bit(vcpu))
+	if (vcpu_mode_is_32bit(vcpu)) {
+		mode = *vcpu_cpsr(vcpu) & COMPAT_PSR_MODE_MASK;
 		return mode > COMPAT_PSR_MODE_USR;
+	}
+
+	mode = *vcpu_cpsr(vcpu) & PSR_MODE_MASK;
 
 	return mode != PSR_MODE_EL0t;
 }
@@ -176,6 +192,11 @@ static inline bool kvm_vcpu_dabt_iss1tw(const struct kvm_vcpu *vcpu)
 	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_S1PTW);
 }
 
+static inline bool kvm_vcpu_dabt_is_cm(const struct kvm_vcpu *vcpu)
+{
+	return !!(kvm_vcpu_get_hsr(vcpu) & ESR_ELx_CM);
+}
+
 static inline int kvm_vcpu_dabt_get_as(const struct kvm_vcpu *vcpu)
 {
 	return 1 << ((kvm_vcpu_get_hsr(vcpu) & ESR_ELx_SAS) >> ESR_ELx_SAS_SHIFT);
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index a35ce7266aac..f5c6bd2541ef 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -37,10 +37,11 @@
 
 #include <kvm/arm_vgic.h>
 #include <kvm/arm_arch_timer.h>
+#include <kvm/arm_pmu.h>
 
 #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
 
-#define KVM_VCPU_MAX_FEATURES 3
+#define KVM_VCPU_MAX_FEATURES 4
 
 int __attribute_const__ kvm_target_cpu(void);
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
@@ -85,6 +86,101 @@ struct kvm_vcpu_fault_info {
 	u64 hpfar_el2;		/* Hyp IPA Fault Address Register */
 };
 
+/*
+ * 0 is reserved as an invalid value.
+ * Order should be kept in sync with the save/restore code.
+ */
+enum vcpu_sysreg {
+	__INVALID_SYSREG__,
+	MPIDR_EL1,	/* MultiProcessor Affinity Register */
+	CSSELR_EL1,	/* Cache Size Selection Register */
+	SCTLR_EL1,	/* System Control Register */
+	ACTLR_EL1,	/* Auxiliary Control Register */
+	CPACR_EL1,	/* Coprocessor Access Control */
+	TTBR0_EL1,	/* Translation Table Base Register 0 */
+	TTBR1_EL1,	/* Translation Table Base Register 1 */
+	TCR_EL1,	/* Translation Control Register */
+	ESR_EL1,	/* Exception Syndrome Register */
+	AFSR0_EL1,	/* Auxiliary Fault Status Register 0 */
+	AFSR1_EL1,	/* Auxiliary Fault Status Register 1 */
+	FAR_EL1,	/* Fault Address Register */
+	MAIR_EL1,	/* Memory Attribute Indirection Register */
+	VBAR_EL1,	/* Vector Base Address Register */
+	CONTEXTIDR_EL1,	/* Context ID Register */
+	TPIDR_EL0,	/* Thread ID, User R/W */
+	TPIDRRO_EL0,	/* Thread ID, User R/O */
+	TPIDR_EL1,	/* Thread ID, Privileged */
+	AMAIR_EL1,	/* Aux Memory Attribute Indirection Register */
+	CNTKCTL_EL1,	/* Timer Control Register (EL1) */
+	PAR_EL1,	/* Physical Address Register */
+	MDSCR_EL1,	/* Monitor Debug System Control Register */
+	MDCCINT_EL1,	/* Monitor Debug Comms Channel Interrupt Enable Reg */
+
+	/* Performance Monitors Registers */
+	PMCR_EL0,	/* Control Register */
+	PMSELR_EL0,	/* Event Counter Selection Register */
+	PMEVCNTR0_EL0,	/* Event Counter Register (0-30) */
+	PMEVCNTR30_EL0 = PMEVCNTR0_EL0 + 30,
+	PMCCNTR_EL0,	/* Cycle Counter Register */
+	PMEVTYPER0_EL0,	/* Event Type Register (0-30) */
+	PMEVTYPER30_EL0 = PMEVTYPER0_EL0 + 30,
+	PMCCFILTR_EL0,	/* Cycle Count Filter Register */
+	PMCNTENSET_EL0,	/* Count Enable Set Register */
+	PMINTENSET_EL1,	/* Interrupt Enable Set Register */
+	PMOVSSET_EL0,	/* Overflow Flag Status Set Register */
+	PMSWINC_EL0,	/* Software Increment Register */
+	PMUSERENR_EL0,	/* User Enable Register */
+
+	/* 32bit specific registers. Keep them at the end of the range */
+	DACR32_EL2,	/* Domain Access Control Register */
+	IFSR32_EL2,	/* Instruction Fault Status Register */
+	FPEXC32_EL2,	/* Floating-Point Exception Control Register */
+	DBGVCR32_EL2,	/* Debug Vector Catch Register */
+
+	NR_SYS_REGS	/* Nothing after this line! */
+};
+
+/* 32bit mapping */
+#define c0_MPIDR	(MPIDR_EL1 * 2)	/* MultiProcessor ID Register */
+#define c0_CSSELR	(CSSELR_EL1 * 2)/* Cache Size Selection Register */
+#define c1_SCTLR	(SCTLR_EL1 * 2)	/* System Control Register */
+#define c1_ACTLR	(ACTLR_EL1 * 2)	/* Auxiliary Control Register */
+#define c1_CPACR	(CPACR_EL1 * 2)	/* Coprocessor Access Control */
+#define c2_TTBR0	(TTBR0_EL1 * 2)	/* Translation Table Base Register 0 */
+#define c2_TTBR0_high	(c2_TTBR0 + 1)	/* TTBR0 top 32 bits */
+#define c2_TTBR1	(TTBR1_EL1 * 2)	/* Translation Table Base Register 1 */
+#define c2_TTBR1_high	(c2_TTBR1 + 1)	/* TTBR1 top 32 bits */
+#define c2_TTBCR	(TCR_EL1 * 2)	/* Translation Table Base Control R. */
+#define c3_DACR		(DACR32_EL2 * 2)/* Domain Access Control Register */
+#define c5_DFSR		(ESR_EL1 * 2)	/* Data Fault Status Register */
+#define c5_IFSR		(IFSR32_EL2 * 2)/* Instruction Fault Status Register */
+#define c5_ADFSR	(AFSR0_EL1 * 2)	/* Auxiliary Data Fault Status R */
+#define c5_AIFSR	(AFSR1_EL1 * 2)	/* Auxiliary Instr Fault Status R */
+#define c6_DFAR		(FAR_EL1 * 2)	/* Data Fault Address Register */
+#define c6_IFAR		(c6_DFAR + 1)	/* Instruction Fault Address Register */
+#define c7_PAR		(PAR_EL1 * 2)	/* Physical Address Register */
+#define c7_PAR_high	(c7_PAR + 1)	/* PAR top 32 bits */
+#define c10_PRRR	(MAIR_EL1 * 2)	/* Primary Region Remap Register */
+#define c10_NMRR	(c10_PRRR + 1)	/* Normal Memory Remap Register */
+#define c12_VBAR	(VBAR_EL1 * 2)	/* Vector Base Address Register */
+#define c13_CID		(CONTEXTIDR_EL1 * 2)	/* Context ID Register */
+#define c13_TID_URW	(TPIDR_EL0 * 2)	/* Thread ID, User R/W */
+#define c13_TID_URO	(TPIDRRO_EL0 * 2)/* Thread ID, User R/O */
+#define c13_TID_PRIV	(TPIDR_EL1 * 2)	/* Thread ID, Privileged */
+#define c10_AMAIR0	(AMAIR_EL1 * 2)	/* Aux Memory Attr Indirection Reg */
+#define c10_AMAIR1	(c10_AMAIR0 + 1)/* Aux Memory Attr Indirection Reg */
+#define c14_CNTKCTL	(CNTKCTL_EL1 * 2) /* Timer Control Register (PL1) */
+
+#define cp14_DBGDSCRext	(MDSCR_EL1 * 2)
+#define cp14_DBGBCR0	(DBGBCR0_EL1 * 2)
+#define cp14_DBGBVR0	(DBGBVR0_EL1 * 2)
+#define cp14_DBGBXVR0	(cp14_DBGBVR0 + 1)
+#define cp14_DBGWCR0	(DBGWCR0_EL1 * 2)
+#define cp14_DBGWVR0	(DBGWVR0_EL1 * 2)
+#define cp14_DBGDCCINT	(MDCCINT_EL1 * 2)
+
+#define NR_COPRO_REGS	(NR_SYS_REGS * 2)
+
 struct kvm_cpu_context {
 	struct kvm_regs	gp_regs;
 	union {
@@ -132,6 +228,7 @@ struct kvm_vcpu_arch {
 	/* VGIC state */
 	struct vgic_cpu vgic_cpu;
 	struct arch_timer_cpu timer_cpu;
+	struct kvm_pmu pmu;
 
 	/*
 	 * Anything that is not used directly from assembly code goes
@@ -197,6 +294,12 @@ struct kvm_vcpu_stat {
 	u32 halt_successful_poll;
 	u32 halt_attempted_poll;
 	u32 halt_wakeup;
+	u32 hvc_exit_stat;
+	u64 wfe_exit_stat;
+	u64 wfi_exit_stat;
+	u64 mmio_exit_user;
+	u64 mmio_exit_kernel;
+	u64 exits;
 };
 
 int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init);
@@ -222,7 +325,9 @@ static inline void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm,
 struct kvm_vcpu *kvm_arm_get_running_vcpu(void);
 struct kvm_vcpu * __percpu *kvm_get_running_vcpus(void);
 
-u64 kvm_call_hyp(void *hypfn, ...);
+u64 __kvm_call_hyp(void *hypfn, ...);
+#define kvm_call_hyp(f, ...) __kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__)
+
 void force_vm_exit(const cpumask_t *mask);
 void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot);
 
@@ -243,8 +348,8 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr,
 	 * Call initialization code, and switch to the full blown
 	 * HYP code.
 	 */
-	kvm_call_hyp((void *)boot_pgd_ptr, pgd_ptr,
-		     hyp_stack_ptr, vector_ptr);
+	__kvm_call_hyp((void *)boot_pgd_ptr, pgd_ptr,
+		       hyp_stack_ptr, vector_ptr);
 }
 
 static inline void kvm_arch_hardware_disable(void) {}
@@ -257,5 +362,19 @@ void kvm_arm_init_debug(void);
 void kvm_arm_setup_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu);
 void kvm_arm_reset_debug_ptr(struct kvm_vcpu *vcpu);
+int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr);
+int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr);
+int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr);
+
+static inline void __cpu_init_stage2(void)
+{
+	u32 parange = kvm_call_hyp(__init_stage2_translation);
+
+	WARN_ONCE(parange < 40,
+		  "PARange is %d bits, unsupported configuration!", parange);
+}
 
 #endif /* __ARM64_KVM_HOST_H__ */
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
new file mode 100644
index 000000000000..44eaff70da6a
--- /dev/null
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM64_KVM_HYP_H__
+#define __ARM64_KVM_HYP_H__
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_mmu.h>
+#include <asm/sysreg.h>
+
+#define __hyp_text __section(.hyp.text) notrace
+
+static inline unsigned long __kern_hyp_va(unsigned long v)
+{
+	asm volatile(ALTERNATIVE("and %0, %0, %1",
+				 "nop",
+				 ARM64_HAS_VIRT_HOST_EXTN)
+		     : "+r" (v) : "i" (HYP_PAGE_OFFSET_MASK));
+	return v;
+}
+
+#define kern_hyp_va(v) (typeof(v))(__kern_hyp_va((unsigned long)(v)))
+
+static inline unsigned long __hyp_kern_va(unsigned long v)
+{
+	u64 offset = PAGE_OFFSET - HYP_PAGE_OFFSET;
+	asm volatile(ALTERNATIVE("add %0, %0, %1",
+				 "nop",
+				 ARM64_HAS_VIRT_HOST_EXTN)
+		     : "+r" (v) : "r" (offset));
+	return v;
+}
+
+#define hyp_kern_va(v) (typeof(v))(__hyp_kern_va((unsigned long)(v)))
+
+#define read_sysreg_elx(r,nvh,vh)					\
+	({								\
+		u64 reg;						\
+		asm volatile(ALTERNATIVE("mrs %0, " __stringify(r##nvh),\
+					 "mrs_s %0, " __stringify(r##vh),\
+					 ARM64_HAS_VIRT_HOST_EXTN)	\
+			     : "=r" (reg));				\
+		reg;							\
+	})
+
+#define write_sysreg_elx(v,r,nvh,vh)					\
+	do {								\
+		u64 __val = (u64)(v);					\
+		asm volatile(ALTERNATIVE("msr " __stringify(r##nvh) ", %x0",\
+					 "msr_s " __stringify(r##vh) ", %x0",\
+					 ARM64_HAS_VIRT_HOST_EXTN)	\
+					 : : "rZ" (__val));		\
+	} while (0)
+
+/*
+ * Unified accessors for registers that have a different encoding
+ * between VHE and non-VHE. They must be specified without their "ELx"
+ * encoding.
+ */
+#define read_sysreg_el2(r)						\
+	({								\
+		u64 reg;						\
+		asm volatile(ALTERNATIVE("mrs %0, " __stringify(r##_EL2),\
+					 "mrs %0, " __stringify(r##_EL1),\
+					 ARM64_HAS_VIRT_HOST_EXTN)	\
+			     : "=r" (reg));				\
+		reg;							\
+	})
+
+#define write_sysreg_el2(v,r)						\
+	do {								\
+		u64 __val = (u64)(v);					\
+		asm volatile(ALTERNATIVE("msr " __stringify(r##_EL2) ", %x0",\
+					 "msr " __stringify(r##_EL1) ", %x0",\
+					 ARM64_HAS_VIRT_HOST_EXTN)	\
+					 : : "rZ" (__val));		\
+	} while (0)
+
+#define read_sysreg_el0(r)	read_sysreg_elx(r, _EL0, _EL02)
+#define write_sysreg_el0(v,r)	write_sysreg_elx(v, r, _EL0, _EL02)
+#define read_sysreg_el1(r)	read_sysreg_elx(r, _EL1, _EL12)
+#define write_sysreg_el1(v,r)	write_sysreg_elx(v, r, _EL1, _EL12)
+
+/* The VHE specific system registers and their encoding */
+#define sctlr_EL12              sys_reg(3, 5, 1, 0, 0)
+#define cpacr_EL12              sys_reg(3, 5, 1, 0, 2)
+#define ttbr0_EL12              sys_reg(3, 5, 2, 0, 0)
+#define ttbr1_EL12              sys_reg(3, 5, 2, 0, 1)
+#define tcr_EL12                sys_reg(3, 5, 2, 0, 2)
+#define afsr0_EL12              sys_reg(3, 5, 5, 1, 0)
+#define afsr1_EL12              sys_reg(3, 5, 5, 1, 1)
+#define esr_EL12                sys_reg(3, 5, 5, 2, 0)
+#define far_EL12                sys_reg(3, 5, 6, 0, 0)
+#define mair_EL12               sys_reg(3, 5, 10, 2, 0)
+#define amair_EL12              sys_reg(3, 5, 10, 3, 0)
+#define vbar_EL12               sys_reg(3, 5, 12, 0, 0)
+#define contextidr_EL12         sys_reg(3, 5, 13, 0, 1)
+#define cntkctl_EL12            sys_reg(3, 5, 14, 1, 0)
+#define cntp_tval_EL02          sys_reg(3, 5, 14, 2, 0)
+#define cntp_ctl_EL02           sys_reg(3, 5, 14, 2, 1)
+#define cntp_cval_EL02          sys_reg(3, 5, 14, 2, 2)
+#define cntv_tval_EL02          sys_reg(3, 5, 14, 3, 0)
+#define cntv_ctl_EL02           sys_reg(3, 5, 14, 3, 1)
+#define cntv_cval_EL02          sys_reg(3, 5, 14, 3, 2)
+#define spsr_EL12               sys_reg(3, 5, 4, 0, 0)
+#define elr_EL12                sys_reg(3, 5, 4, 0, 1)
+
+/**
+ * hyp_alternate_select - Generates patchable code sequences that are
+ * used to switch between two implementations of a function, depending
+ * on the availability of a feature.
+ *
+ * @fname: a symbol name that will be defined as a function returning a
+ * function pointer whose type will match @orig and @alt
+ * @orig: A pointer to the default function, as returned by @fname when
+ * @cond doesn't hold
+ * @alt: A pointer to the alternate function, as returned by @fname
+ * when @cond holds
+ * @cond: a CPU feature (as described in asm/cpufeature.h)
+ */
+#define hyp_alternate_select(fname, orig, alt, cond)			\
+typeof(orig) * __hyp_text fname(void)					\
+{									\
+	typeof(alt) *val = orig;					\
+	asm volatile(ALTERNATIVE("nop		\n",			\
+				 "mov	%0, %1	\n",			\
+				 cond)					\
+		     : "+r" (val) : "r" (alt));				\
+	return val;							\
+}
+
+void __vgic_v2_save_state(struct kvm_vcpu *vcpu);
+void __vgic_v2_restore_state(struct kvm_vcpu *vcpu);
+
+void __vgic_v3_save_state(struct kvm_vcpu *vcpu);
+void __vgic_v3_restore_state(struct kvm_vcpu *vcpu);
+
+void __timer_save_state(struct kvm_vcpu *vcpu);
+void __timer_restore_state(struct kvm_vcpu *vcpu);
+
+void __sysreg_save_host_state(struct kvm_cpu_context *ctxt);
+void __sysreg_restore_host_state(struct kvm_cpu_context *ctxt);
+void __sysreg_save_guest_state(struct kvm_cpu_context *ctxt);
+void __sysreg_restore_guest_state(struct kvm_cpu_context *ctxt);
+void __sysreg32_save_state(struct kvm_vcpu *vcpu);
+void __sysreg32_restore_state(struct kvm_vcpu *vcpu);
+
+void __debug_save_state(struct kvm_vcpu *vcpu,
+			struct kvm_guest_debug_arch *dbg,
+			struct kvm_cpu_context *ctxt);
+void __debug_restore_state(struct kvm_vcpu *vcpu,
+			   struct kvm_guest_debug_arch *dbg,
+			   struct kvm_cpu_context *ctxt);
+void __debug_cond_save_host_state(struct kvm_vcpu *vcpu);
+void __debug_cond_restore_host_state(struct kvm_vcpu *vcpu);
+
+void __fpsimd_save_state(struct user_fpsimd_state *fp_regs);
+void __fpsimd_restore_state(struct user_fpsimd_state *fp_regs);
+bool __fpsimd_enabled(void);
+
+u64 __guest_enter(struct kvm_vcpu *vcpu, struct kvm_cpu_context *host_ctxt);
+void __noreturn __hyp_do_panic(unsigned long, ...);
+
+#endif /* __ARM64_KVM_HYP_H__ */
+
diff --git a/arch/arm64/include/asm/kvm_mmio.h b/arch/arm64/include/asm/kvm_mmio.h
index 889c908ee631..fe612a962576 100644
--- a/arch/arm64/include/asm/kvm_mmio.h
+++ b/arch/arm64/include/asm/kvm_mmio.h
@@ -19,7 +19,6 @@
 #define __ARM64_KVM_MMIO_H__
 
 #include <linux/kvm_host.h>
-#include <asm/kvm_asm.h>
 #include <asm/kvm_arm.h>
 
 /*
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 61505676d085..22732a5e3119 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -20,15 +20,19 @@
 
 #include <asm/page.h>
 #include <asm/memory.h>
+#include <asm/cpufeature.h>
 
 /*
- * As we only have the TTBR0_EL2 register, we cannot express
+ * As ARMv8.0 only has the TTBR0_EL2 register, we cannot express
  * "negative" addresses. This makes it impossible to directly share
  * mappings with the kernel.
  *
  * Instead, give the HYP mode its own VA region at a fixed offset from
  * the kernel by just masking the top bits (which are all ones for a
  * kernel address).
+ *
+ * ARMv8.1 (using VHE) does have a TTBR1_EL2, and doesn't use these
+ * macros (the entire kernel runs at EL2).
  */
 #define HYP_PAGE_OFFSET_SHIFT	VA_BITS
 #define HYP_PAGE_OFFSET_MASK	((UL(1) << HYP_PAGE_OFFSET_SHIFT) - 1)
@@ -55,12 +59,19 @@
 
 #ifdef __ASSEMBLY__
 
+#include <asm/alternative.h>
+#include <asm/cpufeature.h>
+
 /*
  * Convert a kernel VA into a HYP VA.
  * reg: VA to be converted.
  */
 .macro kern_hyp_va	reg
+alternative_if_not ARM64_HAS_VIRT_HOST_EXTN	
 	and	\reg, \reg, #HYP_PAGE_OFFSET_MASK
+alternative_else
+	nop
+alternative_endif
 .endm
 
 #else
@@ -158,7 +169,6 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
 #define PTRS_PER_S2_PGD_SHIFT	(KVM_PHYS_SHIFT - PGDIR_SHIFT)
 #endif
 #define PTRS_PER_S2_PGD		(1 << PTRS_PER_S2_PGD_SHIFT)
-#define S2_PGD_ORDER		get_order(PTRS_PER_S2_PGD * sizeof(pgd_t))
 
 #define kvm_pgd_index(addr)	(((addr) >> PGDIR_SHIFT) & (PTRS_PER_S2_PGD - 1))
 
@@ -230,7 +240,8 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
 	return (vcpu_sys_reg(vcpu, SCTLR_EL1) & 0b101) == 0b101;
 }
 
-static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu, pfn_t pfn,
+static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu,
+					       kvm_pfn_t pfn,
 					       unsigned long size,
 					       bool ipa_uncached)
 {
@@ -302,5 +313,12 @@ static inline void __kvm_extend_hypmap(pgd_t *boot_hyp_pgd,
 	merged_hyp_pgd[idmap_idx] = __pgd(__pa(boot_hyp_pgd) | PMD_TYPE_TABLE);
 }
 
+static inline unsigned int kvm_get_vmid_bits(void)
+{
+	int reg = read_system_reg(SYS_ID_AA64MMFR1_EL1);
+
+	return (cpuid_feature_extract_unsigned_field(reg, ID_AA64MMFR1_VMIDBITS_SHIFT) == 2) ? 16 : 8;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif /* __ARM64_KVM_MMU_H__ */
diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h
index 3de42d68611d..23acc00be32d 100644
--- a/arch/arm64/include/asm/lse.h
+++ b/arch/arm64/include/asm/lse.h
@@ -26,6 +26,7 @@ __asm__(".arch_extension	lse");
 
 /* Macro for constructing calls to out-of-line ll/sc atomics */
 #define __LL_SC_CALL(op)	"bl\t" __stringify(__LL_SC_PREFIX(op)) "\n"
+#define __LL_SC_CLOBBERS	"x16", "x17", "x30"
 
 /* In-line patching at runtime */
 #define ARM64_LSE_ATOMIC_INSN(llsc, lse)				\
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index 853953cd1f08..12f8a00fb3f1 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -24,6 +24,7 @@
 #include <linux/compiler.h>
 #include <linux/const.h>
 #include <linux/types.h>
+#include <asm/bug.h>
 #include <asm/sizes.h>
 
 /*
@@ -45,15 +46,15 @@
  * VA_START - the first kernel virtual address.
  * TASK_SIZE - the maximum size of a user space task.
  * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area.
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 128MB of the kernel text.
  */
 #define VA_BITS			(CONFIG_ARM64_VA_BITS)
 #define VA_START		(UL(0xffffffffffffffff) << VA_BITS)
 #define PAGE_OFFSET		(UL(0xffffffffffffffff) << (VA_BITS - 1))
-#define MODULES_END		(PAGE_OFFSET)
-#define MODULES_VADDR		(MODULES_END - SZ_64M)
-#define PCI_IO_END		(MODULES_VADDR - SZ_2M)
+#define KIMAGE_VADDR		(MODULES_END)
+#define MODULES_END		(MODULES_VADDR + MODULES_VSIZE)
+#define MODULES_VADDR		(VA_START + KASAN_SHADOW_SIZE)
+#define MODULES_VSIZE		(SZ_128M)
+#define PCI_IO_END		(PAGE_OFFSET - SZ_2M)
 #define PCI_IO_START		(PCI_IO_END - PCI_IO_SIZE)
 #define FIXADDR_TOP		(PCI_IO_START - SZ_2M)
 #define TASK_SIZE_64		(UL(1) << VA_BITS)
@@ -71,12 +72,27 @@
 #define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 4))
 
 /*
+ * The size of the KASAN shadow region. This should be 1/8th of the
+ * size of the entire kernel virtual address space.
+ */
+#ifdef CONFIG_KASAN
+#define KASAN_SHADOW_SIZE	(UL(1) << (VA_BITS - 3))
+#else
+#define KASAN_SHADOW_SIZE	(0)
+#endif
+
+/*
  * Physical vs virtual RAM address space conversion.  These are
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
  */
-#define __virt_to_phys(x)	(((phys_addr_t)(x) - PAGE_OFFSET + PHYS_OFFSET))
-#define __phys_to_virt(x)	((unsigned long)((x) - PHYS_OFFSET + PAGE_OFFSET))
+#define __virt_to_phys(x) ({						\
+	phys_addr_t __x = (phys_addr_t)(x);				\
+	__x & BIT(VA_BITS - 1) ? (__x & ~PAGE_OFFSET) + PHYS_OFFSET :	\
+				 (__x - kimage_voffset); })
+
+#define __phys_to_virt(x)	((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
+#define __phys_to_kimg(x)	((unsigned long)((x) + kimage_voffset))
 
 /*
  * Convert a page to/from a physical address
@@ -100,19 +116,40 @@
 #define MT_S2_NORMAL		0xf
 #define MT_S2_DEVICE_nGnRE	0x1
 
+#ifdef CONFIG_ARM64_4K_PAGES
+#define IOREMAP_MAX_ORDER	(PUD_SHIFT)
+#else
+#define IOREMAP_MAX_ORDER	(PMD_SHIFT)
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#define __early_init_dt_declare_initrd(__start, __end)			\
+	do {								\
+		initrd_start = (__start);				\
+		initrd_end = (__end);					\
+	} while (0)
+#endif
+
 #ifndef __ASSEMBLY__
 
-extern phys_addr_t		memstart_addr;
+#include <linux/bitops.h>
+#include <linux/mmdebug.h>
+
+extern s64			memstart_addr;
 /* PHYS_OFFSET - the physical address of the start of memory. */
-#define PHYS_OFFSET		({ memstart_addr; })
+#define PHYS_OFFSET		({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
+
+/* the virtual base of the kernel image (minus TEXT_OFFSET) */
+extern u64			kimage_vaddr;
+
+/* the offset between the kernel virtual and physical mappings */
+extern u64			kimage_voffset;
 
 /*
- * The maximum physical address that the linear direct mapping
- * of system RAM can cover. (PAGE_OFFSET can be interpreted as
- * a 2's complement signed quantity and negated to derive the
- * maximum size of the linear mapping.)
+ * Allow all memory at the discovery stage. We will clip it later.
  */
-#define MAX_MEMBLOCK_ADDR	({ memstart_addr - PAGE_OFFSET - 1; })
+#define MIN_MEMBLOCK_ADDR	0
+#define MAX_MEMBLOCK_ADDR	U64_MAX
 
 /*
  * PFNs are used to describe any physical page; this means
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index c0e87898ba96..b1892a0dbcb0 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -27,6 +27,7 @@
 #include <asm-generic/mm_hooks.h>
 #include <asm/cputype.h>
 #include <asm/pgtable.h>
+#include <asm/tlbflush.h>
 
 #ifdef CONFIG_PID_IN_CONTEXTIDR
 static inline void contextidr_thread_switch(struct task_struct *next)
@@ -48,7 +49,7 @@ static inline void contextidr_thread_switch(struct task_struct *next)
  */
 static inline void cpu_set_reserved_ttbr0(void)
 {
-	unsigned long ttbr = page_to_phys(empty_zero_page);
+	unsigned long ttbr = virt_to_phys(empty_zero_page);
 
 	asm(
 	"	msr	ttbr0_el1, %0			// set TTBR0\n"
@@ -73,7 +74,7 @@ static inline bool __cpu_uses_extended_idmap(void)
 /*
  * Set TCR.T0SZ to its default value (based on VA_BITS)
  */
-static inline void cpu_set_default_tcr_t0sz(void)
+static inline void __cpu_set_tcr_t0sz(unsigned long t0sz)
 {
 	unsigned long tcr;
 
@@ -86,7 +87,62 @@ static inline void cpu_set_default_tcr_t0sz(void)
 	"	msr	tcr_el1, %0	;"
 	"	isb"
 	: "=&r" (tcr)
-	: "r"(TCR_T0SZ(VA_BITS)), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH));
+	: "r"(t0sz), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH));
+}
+
+#define cpu_set_default_tcr_t0sz()	__cpu_set_tcr_t0sz(TCR_T0SZ(VA_BITS))
+#define cpu_set_idmap_tcr_t0sz()	__cpu_set_tcr_t0sz(idmap_t0sz)
+
+/*
+ * Remove the idmap from TTBR0_EL1 and install the pgd of the active mm.
+ *
+ * The idmap lives in the same VA range as userspace, but uses global entries
+ * and may use a different TCR_EL1.T0SZ. To avoid issues resulting from
+ * speculative TLB fetches, we must temporarily install the reserved page
+ * tables while we invalidate the TLBs and set up the correct TCR_EL1.T0SZ.
+ *
+ * If current is a not a user task, the mm covers the TTBR1_EL1 page tables,
+ * which should not be installed in TTBR0_EL1. In this case we can leave the
+ * reserved page tables in place.
+ */
+static inline void cpu_uninstall_idmap(void)
+{
+	struct mm_struct *mm = current->active_mm;
+
+	cpu_set_reserved_ttbr0();
+	local_flush_tlb_all();
+	cpu_set_default_tcr_t0sz();
+
+	if (mm != &init_mm)
+		cpu_switch_mm(mm->pgd, mm);
+}
+
+static inline void cpu_install_idmap(void)
+{
+	cpu_set_reserved_ttbr0();
+	local_flush_tlb_all();
+	cpu_set_idmap_tcr_t0sz();
+
+	cpu_switch_mm(idmap_pg_dir, &init_mm);
+}
+
+/*
+ * Atomically replaces the active TTBR1_EL1 PGD with a new VA-compatible PGD,
+ * avoiding the possibility of conflicting TLB entries being allocated.
+ */
+static inline void cpu_replace_ttbr1(pgd_t *pgd)
+{
+	typedef void (ttbr_replace_func)(phys_addr_t);
+	extern ttbr_replace_func idmap_cpu_replace_ttbr1;
+	ttbr_replace_func *replace_phys;
+
+	phys_addr_t pgd_phys = virt_to_phys(pgd);
+
+	replace_phys = (void *)virt_to_phys(idmap_cpu_replace_ttbr1);
+
+	cpu_install_idmap();
+	replace_phys(pgd_phys);
+	cpu_uninstall_idmap();
 }
 
 /*
@@ -101,7 +157,7 @@ static inline void cpu_set_default_tcr_t0sz(void)
 #define destroy_context(mm)		do { } while(0)
 void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
 
-#define init_new_context(tsk,mm)	({ atomic64_set(&mm->context.id, 0); 0; })
+#define init_new_context(tsk,mm)	({ atomic64_set(&(mm)->context.id, 0); 0; })
 
 /*
  * This is called when "tsk" is about to enter lazy TLB mode.
@@ -147,4 +203,6 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #define deactivate_mm(tsk,mm)	do { } while (0)
 #define activate_mm(prev,next)	switch_mm(prev, next, NULL)
 
+void verify_cpu_asid_bits(void);
+
 #endif
diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h
index e80e232b730e..e12af6754634 100644
--- a/arch/arm64/include/asm/module.h
+++ b/arch/arm64/include/asm/module.h
@@ -20,4 +20,21 @@
 
 #define MODULE_ARCH_VERMAGIC	"aarch64"
 
+#ifdef CONFIG_ARM64_MODULE_PLTS
+struct mod_arch_specific {
+	struct elf64_shdr	*plt;
+	int			plt_num_entries;
+	int			plt_max_entries;
+};
+#endif
+
+u64 module_emit_plt_entry(struct module *mod, const Elf64_Rela *rela,
+			  Elf64_Sym *sym);
+
+#ifdef CONFIG_RANDOMIZE_BASE
+extern u64 module_alloc_base;
+#else
+#define module_alloc_base	((u64)_etext - MODULES_VSIZE)
+#endif
+
 #endif /* __ASM_MODULE_H */
diff --git a/arch/arm64/include/asm/opcodes.h b/arch/arm64/include/asm/opcodes.h
index 4e603ea36ad3..123f45d92cd1 100644
--- a/arch/arm64/include/asm/opcodes.h
+++ b/arch/arm64/include/asm/opcodes.h
@@ -1 +1,5 @@
+#ifdef CONFIG_CPU_BIG_ENDIAN
+#define CONFIG_CPU_ENDIAN_BE8 CONFIG_CPU_BIG_ENDIAN
+#endif
+
 #include <../../arm/include/asm/opcodes.h>
diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h
index 9b2f5a9d019d..ae615b9d9a55 100644
--- a/arch/arm64/include/asm/page.h
+++ b/arch/arm64/include/asm/page.h
@@ -39,6 +39,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/personality.h> /* for READ_IMPLIES_EXEC */
 #include <asm/pgtable-types.h>
 
 extern void __cpu_clear_user_page(void *p, unsigned long user);
diff --git a/arch/arm64/include/asm/paravirt.h b/arch/arm64/include/asm/paravirt.h
new file mode 100644
index 000000000000..fd5f42886251
--- /dev/null
+++ b/arch/arm64/include/asm/paravirt.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_ARM64_PARAVIRT_H
+#define _ASM_ARM64_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT
+struct static_key;
+extern struct static_key paravirt_steal_enabled;
+extern struct static_key paravirt_steal_rq_enabled;
+
+struct pv_time_ops {
+	unsigned long long (*steal_clock)(int cpu);
+};
+extern struct pv_time_ops pv_time_ops;
+
+static inline u64 paravirt_steal_clock(int cpu)
+{
+	return pv_time_ops.steal_clock(cpu);
+}
+#endif
+
+#endif
diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h
index b008a72f8bc0..b9a7ba9ca44c 100644
--- a/arch/arm64/include/asm/pci.h
+++ b/arch/arm64/include/asm/pci.h
@@ -7,8 +7,6 @@
 #include <linux/dma-mapping.h>
 
 #include <asm/io.h>
-#include <asm-generic/pci-bridge.h>
-#include <asm-generic/pci-dma-compat.h>
 
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
index 7bd3cdb533ea..2065f46fa740 100644
--- a/arch/arm64/include/asm/perf_event.h
+++ b/arch/arm64/include/asm/perf_event.h
@@ -17,6 +17,53 @@
 #ifndef __ASM_PERF_EVENT_H
 #define __ASM_PERF_EVENT_H
 
+#define	ARMV8_PMU_MAX_COUNTERS	32
+#define	ARMV8_PMU_COUNTER_MASK	(ARMV8_PMU_MAX_COUNTERS - 1)
+
+/*
+ * Per-CPU PMCR: config reg
+ */
+#define ARMV8_PMU_PMCR_E	(1 << 0) /* Enable all counters */
+#define ARMV8_PMU_PMCR_P	(1 << 1) /* Reset all counters */
+#define ARMV8_PMU_PMCR_C	(1 << 2) /* Cycle counter reset */
+#define ARMV8_PMU_PMCR_D	(1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV8_PMU_PMCR_X	(1 << 4) /* Export to ETM */
+#define ARMV8_PMU_PMCR_DP	(1 << 5) /* Disable CCNT if non-invasive debug*/
+#define ARMV8_PMU_PMCR_LC	(1 << 6) /* Overflow on 64 bit cycle counter */
+#define	ARMV8_PMU_PMCR_N_SHIFT	11	 /* Number of counters supported */
+#define	ARMV8_PMU_PMCR_N_MASK	0x1f
+#define	ARMV8_PMU_PMCR_MASK	0x7f	 /* Mask for writable bits */
+
+/*
+ * PMOVSR: counters overflow flag status reg
+ */
+#define	ARMV8_PMU_OVSR_MASK		0xffffffff	/* Mask for writable bits */
+#define	ARMV8_PMU_OVERFLOWED_MASK	ARMV8_PMU_OVSR_MASK
+
+/*
+ * PMXEVTYPER: Event selection reg
+ */
+#define	ARMV8_PMU_EVTYPE_MASK	0xc800ffff	/* Mask for writable bits */
+#define	ARMV8_PMU_EVTYPE_EVENT	0xffff		/* Mask for EVENT bits */
+
+#define ARMV8_PMU_EVTYPE_EVENT_SW_INCR	0	/* Software increment event */
+
+/*
+ * Event filters for PMUv3
+ */
+#define	ARMV8_PMU_EXCLUDE_EL1	(1 << 31)
+#define	ARMV8_PMU_EXCLUDE_EL0	(1 << 30)
+#define	ARMV8_PMU_INCLUDE_EL2	(1 << 27)
+
+/*
+ * PMUSERENR: user enable reg
+ */
+#define ARMV8_PMU_USERENR_MASK	0xf		/* Mask for writable bits */
+#define ARMV8_PMU_USERENR_EN	(1 << 0) /* PMU regs can be accessed at EL0 */
+#define ARMV8_PMU_USERENR_SW	(1 << 1) /* PMSWINC can be written at EL0 */
+#define ARMV8_PMU_USERENR_CR	(1 << 2) /* Cycle counter can be read at EL0 */
+#define ARMV8_PMU_USERENR_ER	(1 << 3) /* Event counter can be read at EL0 */
+
 #ifdef CONFIG_PERF_EVENTS
 struct pt_regs;
 extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
diff --git a/arch/arm64/include/asm/pgalloc.h b/arch/arm64/include/asm/pgalloc.h
index c15053902942..ff98585d085a 100644
--- a/arch/arm64/include/asm/pgalloc.h
+++ b/arch/arm64/include/asm/pgalloc.h
@@ -42,11 +42,20 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+static inline void __pud_populate(pud_t *pud, phys_addr_t pmd, pudval_t prot)
 {
-	set_pud(pud, __pud(__pa(pmd) | PMD_TYPE_TABLE));
+	set_pud(pud, __pud(pmd | prot));
 }
 
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	__pud_populate(pud, __pa(pmd), PMD_TYPE_TABLE);
+}
+#else
+static inline void __pud_populate(pud_t *pud, phys_addr_t pmd, pudval_t prot)
+{
+	BUILD_BUG();
+}
 #endif	/* CONFIG_PGTABLE_LEVELS > 2 */
 
 #if CONFIG_PGTABLE_LEVELS > 3
@@ -62,11 +71,20 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 	free_page((unsigned long)pud);
 }
 
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+static inline void __pgd_populate(pgd_t *pgdp, phys_addr_t pud, pgdval_t prot)
 {
-	set_pgd(pgd, __pgd(__pa(pud) | PUD_TYPE_TABLE));
+	set_pgd(pgdp, __pgd(pud | prot));
 }
 
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	__pgd_populate(pgd, __pa(pud), PUD_TYPE_TABLE);
+}
+#else
+static inline void __pgd_populate(pgd_t *pgdp, phys_addr_t pud, pgdval_t prot)
+{
+	BUILD_BUG();
+}
 #endif	/* CONFIG_PGTABLE_LEVELS > 3 */
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index d6739e836f7b..5c25b831273d 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -90,7 +90,23 @@
 /*
  * Contiguous page definitions.
  */
-#define CONT_PTES		(_AC(1, UL) << CONT_SHIFT)
+#ifdef CONFIG_ARM64_64K_PAGES
+#define CONT_PTE_SHIFT		5
+#define CONT_PMD_SHIFT		5
+#elif defined(CONFIG_ARM64_16K_PAGES)
+#define CONT_PTE_SHIFT		7
+#define CONT_PMD_SHIFT		5
+#else
+#define CONT_PTE_SHIFT		4
+#define CONT_PMD_SHIFT		4
+#endif
+
+#define CONT_PTES		(1 << CONT_PTE_SHIFT)
+#define CONT_PTE_SIZE		(CONT_PTES * PAGE_SIZE)
+#define CONT_PTE_MASK		(~(CONT_PTE_SIZE - 1))
+#define CONT_PMDS		(1 << CONT_PMD_SHIFT)
+#define CONT_PMD_SIZE		(CONT_PMDS * PMD_SIZE)
+#define CONT_PMD_MASK		(~(CONT_PMD_SIZE - 1))
 /* the the numerical offset of the PTE within a range of CONT_PTES */
 #define CONT_RANGE_OFFSET(addr) (((addr)>>PAGE_SHIFT)&(CONT_PTES-1))
 
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
new file mode 100644
index 000000000000..29fcb33ab401
--- /dev/null
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2016 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __ASM_PGTABLE_PROT_H
+#define __ASM_PGTABLE_PROT_H
+
+#include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+
+#include <linux/const.h>
+
+/*
+ * Software defined PTE bits definition.
+ */
+#define PTE_VALID		(_AT(pteval_t, 1) << 0)
+#define PTE_WRITE		(PTE_DBM)		 /* same as DBM (51) */
+#define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
+#define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
+#define PTE_PROT_NONE		(_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/pgtable-types.h>
+
+#define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
+#define PROT_SECT_DEFAULT	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
+
+#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
+#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
+#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
+
+#define PROT_SECT_DEVICE_nGnRE	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
+#define PROT_SECT_NORMAL_EXEC	(PROT_SECT_DEFAULT | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
+
+#define _PAGE_DEFAULT		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL))
+
+#define PAGE_KERNEL		__pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE)
+#define PAGE_KERNEL_RO		__pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
+#define PAGE_KERNEL_ROX		__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
+#define PAGE_KERNEL_EXEC	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE)
+#define PAGE_KERNEL_EXEC_CONT	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT)
+
+#define PAGE_HYP		__pgprot(_PAGE_DEFAULT | PTE_HYP)
+#define PAGE_HYP_DEVICE		__pgprot(PROT_DEVICE_nGnRE | PTE_HYP)
+
+#define PAGE_S2			__pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY)
+#define PAGE_S2_DEVICE		__pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)
+
+#define PAGE_NONE		__pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
+#define PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
+#define PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
+#define PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define PAGE_COPY_EXEC		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+#define PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY
+#define __P010  PAGE_COPY
+#define __P011  PAGE_COPY
+#define __P100  PAGE_READONLY_EXEC
+#define __P101  PAGE_READONLY_EXEC
+#define __P110  PAGE_COPY_EXEC
+#define __P111  PAGE_COPY_EXEC
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY
+#define __S010  PAGE_SHARED
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_READONLY_EXEC
+#define __S101  PAGE_READONLY_EXEC
+#define __S110  PAGE_SHARED_EXEC
+#define __S111  PAGE_SHARED_EXEC
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_PGTABLE_PROT_H */
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index f3acf421ded4..989fef16d461 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -21,42 +21,31 @@
 
 #include <asm/memory.h>
 #include <asm/pgtable-hwdef.h>
-
-/*
- * Software defined PTE bits definition.
- */
-#define PTE_VALID		(_AT(pteval_t, 1) << 0)
-#define PTE_WRITE		(PTE_DBM)		 /* same as DBM (51) */
-#define PTE_DIRTY		(_AT(pteval_t, 1) << 55)
-#define PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
-#define PTE_PROT_NONE		(_AT(pteval_t, 1) << 58) /* only when !PTE_VALID */
+#include <asm/pgtable-prot.h>
 
 /*
  * VMALLOC and SPARSEMEM_VMEMMAP ranges.
  *
- * VMEMAP_SIZE: allows the whole VA space to be covered by a struct page array
+ * VMEMAP_SIZE: allows the whole linear region to be covered by a struct page array
  *	(rounded up to PUD_SIZE).
- * VMALLOC_START: beginning of the kernel VA space
+ * VMALLOC_START: beginning of the kernel vmalloc space
  * VMALLOC_END: extends to the available space below vmmemmap, PCI I/O space,
  *	fixed mappings and modules
  */
 #define VMEMMAP_SIZE		ALIGN((1UL << (VA_BITS - PAGE_SHIFT)) * sizeof(struct page), PUD_SIZE)
 
-#ifndef CONFIG_KASAN
-#define VMALLOC_START		(VA_START)
-#else
-#include <asm/kasan.h>
-#define VMALLOC_START		(KASAN_SHADOW_END + SZ_64K)
-#endif
-
+#define VMALLOC_START		(MODULES_END)
 #define VMALLOC_END		(PAGE_OFFSET - PUD_SIZE - VMEMMAP_SIZE - SZ_64K)
 
-#define vmemmap			((struct page *)(VMALLOC_END + SZ_64K))
+#define VMEMMAP_START		(VMALLOC_END + SZ_64K)
+#define vmemmap			((struct page *)VMEMMAP_START - \
+				 SECTION_ALIGN_DOWN(memstart_addr >> PAGE_SHIFT))
 
 #define FIRST_USER_ADDRESS	0UL
 
 #ifndef __ASSEMBLY__
 
+#include <asm/fixmap.h>
 #include <linux/mmdebug.h>
 
 extern void __pte_error(const char *file, int line, unsigned long val);
@@ -64,63 +53,12 @@ extern void __pmd_error(const char *file, int line, unsigned long val);
 extern void __pud_error(const char *file, int line, unsigned long val);
 extern void __pgd_error(const char *file, int line, unsigned long val);
 
-#define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
-#define PROT_SECT_DEFAULT	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
-
-#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
-#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
-#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_NC))
-#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_WT))
-#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL))
-
-#define PROT_SECT_DEVICE_nGnRE	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
-#define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
-#define PROT_SECT_NORMAL_EXEC	(PROT_SECT_DEFAULT | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
-
-#define _PAGE_DEFAULT		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL))
-
-#define PAGE_KERNEL		__pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE)
-#define PAGE_KERNEL_EXEC	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE)
-#define PAGE_KERNEL_EXEC_CONT	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT)
-
-#define PAGE_HYP		__pgprot(_PAGE_DEFAULT | PTE_HYP)
-#define PAGE_HYP_DEVICE		__pgprot(PROT_DEVICE_nGnRE | PTE_HYP)
-
-#define PAGE_S2			__pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_NORMAL) | PTE_S2_RDONLY)
-#define PAGE_S2_DEVICE		__pgprot(PROT_DEFAULT | PTE_S2_MEMATTR(MT_S2_DEVICE_nGnRE) | PTE_S2_RDONLY | PTE_UXN)
-
-#define PAGE_NONE		__pgprot(((_PAGE_DEFAULT) & ~PTE_VALID) | PTE_PROT_NONE | PTE_PXN | PTE_UXN)
-#define PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_WRITE)
-#define PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_WRITE)
-#define PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
-#define PAGE_COPY_EXEC		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
-#define PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
-#define PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
-
-#define __P000  PAGE_NONE
-#define __P001  PAGE_READONLY
-#define __P010  PAGE_COPY
-#define __P011  PAGE_COPY
-#define __P100  PAGE_READONLY_EXEC
-#define __P101  PAGE_READONLY_EXEC
-#define __P110  PAGE_COPY_EXEC
-#define __P111  PAGE_COPY_EXEC
-
-#define __S000  PAGE_NONE
-#define __S001  PAGE_READONLY
-#define __S010  PAGE_SHARED
-#define __S011  PAGE_SHARED
-#define __S100  PAGE_READONLY_EXEC
-#define __S101  PAGE_READONLY_EXEC
-#define __S110  PAGE_SHARED_EXEC
-#define __S111  PAGE_SHARED_EXEC
-
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
  */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr)	virt_to_page(empty_zero_page)
 
 #define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
 
@@ -132,16 +70,6 @@ extern struct page *empty_zero_page;
 #define pte_clear(mm,addr,ptep)	set_pte(ptep, __pte(0))
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 
-/* Find an entry in the third-level page table. */
-#define pte_index(addr)		(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + pte_index(addr))
-
-#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
-#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
-#define pte_unmap(pte)			do { } while (0)
-#define pte_unmap_nested(pte)		do { } while (0)
-
 /*
  * The following only work if pte_present(). Undefined behaviour otherwise.
  */
@@ -151,6 +79,7 @@ extern struct page *empty_zero_page;
 #define pte_write(pte)		(!!(pte_val(pte) & PTE_WRITE))
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 #define pte_cont(pte)		(!!(pte_val(pte) & PTE_CONT))
+#define pte_user(pte)		(!!(pte_val(pte) & PTE_USER))
 
 #ifdef CONFIG_ARM64_HW_AFDBM
 #define pte_hw_dirty(pte)	(pte_write(pte) && !(pte_val(pte) & PTE_RDONLY))
@@ -161,10 +90,18 @@ extern struct page *empty_zero_page;
 #define pte_dirty(pte)		(pte_sw_dirty(pte) || pte_hw_dirty(pte))
 
 #define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
-#define pte_valid_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
 #define pte_valid_not_user(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
+#define pte_valid_young(pte) \
+	((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
+
+/*
+ * Could the pte be present in the TLB? We must check mm_tlb_flush_pending
+ * so that we don't erroneously return false for pages that have been
+ * remapped as PROT_NONE but are yet to be flushed from the TLB.
+ */
+#define pte_accessible(mm, pte)	\
+	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid_young(pte))
 
 static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot)
 {
@@ -215,7 +152,8 @@ static inline pte_t pte_mkspecial(pte_t pte)
 
 static inline pte_t pte_mkcont(pte_t pte)
 {
-	return set_pte_bit(pte, __pgprot(PTE_CONT));
+	pte = set_pte_bit(pte, __pgprot(PTE_CONT));
+	return set_pte_bit(pte, __pgprot(PTE_TYPE_PAGE));
 }
 
 static inline pte_t pte_mknoncont(pte_t pte)
@@ -223,6 +161,11 @@ static inline pte_t pte_mknoncont(pte_t pte)
 	return clear_pte_bit(pte, __pgprot(PTE_CONT));
 }
 
+static inline pmd_t pmd_mkcont(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | PMD_SECT_CONT);
+}
+
 static inline void set_pte(pte_t *ptep, pte_t pte)
 {
 	*ptep = pte;
@@ -260,13 +203,13 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
 {
-	if (pte_valid_user(pte)) {
-		if (!pte_special(pte) && pte_exec(pte))
-			__sync_icache_dcache(pte, addr);
+	if (pte_present(pte)) {
 		if (pte_sw_dirty(pte) && pte_write(pte))
 			pte_val(pte) &= ~PTE_RDONLY;
 		else
 			pte_val(pte) |= PTE_RDONLY;
+		if (pte_user(pte) && pte_exec(pte) && !pte_special(pte))
+			__sync_icache_dcache(pte, addr);
 	}
 
 	/*
@@ -274,10 +217,14 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 	 * hardware updates of the pte (ptep_set_access_flags safely changes
 	 * valid ptes without going through an invalid entry).
 	 */
-	if (IS_ENABLED(CONFIG_DEBUG_VM) && IS_ENABLED(CONFIG_ARM64_HW_AFDBM) &&
-	    pte_valid(*ptep)) {
-		BUG_ON(!pte_young(pte));
-		BUG_ON(pte_write(*ptep) && !pte_dirty(pte));
+	if (IS_ENABLED(CONFIG_ARM64_HW_AFDBM) &&
+	    pte_valid(*ptep) && pte_valid(pte)) {
+		VM_WARN_ONCE(!pte_young(pte),
+			     "%s: racy access flag clearing: 0x%016llx -> 0x%016llx",
+			     __func__, pte_val(*ptep), pte_val(pte));
+		VM_WARN_ONCE(pte_write(*ptep) && !pte_dirty(pte),
+			     "%s: racy dirty state clearing: 0x%016llx -> 0x%016llx",
+			     __func__, pte_val(*ptep), pte_val(pte));
 	}
 
 	set_pte(ptep, pte);
@@ -292,7 +239,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 /*
  * Hugetlb definitions.
  */
-#define HUGE_MAX_HSTATE		2
+#define HUGE_MAX_HSTATE		4
 #define HPAGE_SHIFT		PMD_SHIFT
 #define HPAGE_SIZE		(_AC(1, UL) << HPAGE_SHIFT)
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))
@@ -331,21 +278,14 @@ static inline pgprot_t mk_sect_prot(pgprot_t prot)
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT))
-#define pmd_trans_splitting(pmd)	pte_special(pmd_pte(pmd))
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-struct vm_area_struct;
-void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
-			  pmd_t *pmdp);
-#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
 #define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
-#define pmd_mksplitting(pmd)	pte_pmd(pte_mkspecial(pmd_pte(pmd)))
 #define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
 #define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_mkclean(pmd)       pte_pmd(pte_mkclean(pmd_pte(pmd)))
 #define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
 #define pmd_mknotpresent(pmd)	(__pmd(pmd_val(pmd) & ~PMD_TYPE_MASK))
@@ -396,7 +336,7 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 #define pmd_sect(pmd)		((pmd_val(pmd) & PMD_TYPE_MASK) == \
 				 PMD_TYPE_SECT)
 
-#ifdef CONFIG_ARM64_64K_PAGES
+#if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3
 #define pud_sect(pud)		(0)
 #define pud_table(pud)		(1)
 #else
@@ -418,13 +358,31 @@ static inline void pmd_clear(pmd_t *pmdp)
 	set_pmd(pmdp, __pmd(0));
 }
 
-static inline pte_t *pmd_page_vaddr(pmd_t pmd)
+static inline phys_addr_t pmd_page_paddr(pmd_t pmd)
 {
-	return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK);
+	return pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK;
 }
 
+/* Find an entry in the third-level page table. */
+#define pte_index(addr)		(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_phys(dir,addr)	(pmd_page_paddr(*(dir)) + pte_index(addr) * sizeof(pte_t))
+#define pte_offset_kernel(dir,addr)	((pte_t *)__va(pte_offset_phys((dir), (addr))))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+#define pte_set_fixmap(addr)		((pte_t *)set_fixmap_offset(FIX_PTE, addr))
+#define pte_set_fixmap_offset(pmd, addr)	pte_set_fixmap(pte_offset_phys(pmd, addr))
+#define pte_clear_fixmap()		clear_fixmap(FIX_PTE)
+
 #define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 
+/* use ONLY for statically allocated translation tables */
+#define pte_offset_kimg(dir,addr)	((pte_t *)__phys_to_kimg(pte_offset_phys((dir), (addr))))
+
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
@@ -451,21 +409,37 @@ static inline void pud_clear(pud_t *pudp)
 	set_pud(pudp, __pud(0));
 }
 
-static inline pmd_t *pud_page_vaddr(pud_t pud)
+static inline phys_addr_t pud_page_paddr(pud_t pud)
 {
-	return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
+	return pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK;
 }
 
 /* Find an entry in the second-level page table. */
 #define pmd_index(addr)		(((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
 
-static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
-{
-	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
-}
+#define pmd_offset_phys(dir, addr)	(pud_page_paddr(*(dir)) + pmd_index(addr) * sizeof(pmd_t))
+#define pmd_offset(dir, addr)		((pmd_t *)__va(pmd_offset_phys((dir), (addr))))
+
+#define pmd_set_fixmap(addr)		((pmd_t *)set_fixmap_offset(FIX_PMD, addr))
+#define pmd_set_fixmap_offset(pud, addr)	pmd_set_fixmap(pmd_offset_phys(pud, addr))
+#define pmd_clear_fixmap()		clear_fixmap(FIX_PMD)
 
 #define pud_page(pud)		pfn_to_page(__phys_to_pfn(pud_val(pud) & PHYS_MASK))
 
+/* use ONLY for statically allocated translation tables */
+#define pmd_offset_kimg(dir,addr)	((pmd_t *)__phys_to_kimg(pmd_offset_phys((dir), (addr))))
+
+#else
+
+#define pud_page_paddr(pud)	({ BUILD_BUG(); 0; })
+
+/* Match pmd_offset folding in <asm/generic/pgtable-nopmd.h> */
+#define pmd_set_fixmap(addr)		NULL
+#define pmd_set_fixmap_offset(pudp, addr)	((pmd_t *)pudp)
+#define pmd_clear_fixmap()
+
+#define pmd_offset_kimg(dir,addr)	((pmd_t *)dir)
+
 #endif	/* CONFIG_PGTABLE_LEVELS > 2 */
 
 #if CONFIG_PGTABLE_LEVELS > 3
@@ -487,21 +461,37 @@ static inline void pgd_clear(pgd_t *pgdp)
 	set_pgd(pgdp, __pgd(0));
 }
 
-static inline pud_t *pgd_page_vaddr(pgd_t pgd)
+static inline phys_addr_t pgd_page_paddr(pgd_t pgd)
 {
-	return __va(pgd_val(pgd) & PHYS_MASK & (s32)PAGE_MASK);
+	return pgd_val(pgd) & PHYS_MASK & (s32)PAGE_MASK;
 }
 
 /* Find an entry in the frst-level page table. */
 #define pud_index(addr)		(((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
 
-static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
-{
-	return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(addr);
-}
+#define pud_offset_phys(dir, addr)	(pgd_page_paddr(*(dir)) + pud_index(addr) * sizeof(pud_t))
+#define pud_offset(dir, addr)		((pud_t *)__va(pud_offset_phys((dir), (addr))))
+
+#define pud_set_fixmap(addr)		((pud_t *)set_fixmap_offset(FIX_PUD, addr))
+#define pud_set_fixmap_offset(pgd, addr)	pud_set_fixmap(pud_offset_phys(pgd, addr))
+#define pud_clear_fixmap()		clear_fixmap(FIX_PUD)
 
 #define pgd_page(pgd)		pfn_to_page(__phys_to_pfn(pgd_val(pgd) & PHYS_MASK))
 
+/* use ONLY for statically allocated translation tables */
+#define pud_offset_kimg(dir,addr)	((pud_t *)__phys_to_kimg(pud_offset_phys((dir), (addr))))
+
+#else
+
+#define pgd_page_paddr(pgd)	({ BUILD_BUG(); 0;})
+
+/* Match pud_offset folding in <asm/generic/pgtable-nopud.h> */
+#define pud_set_fixmap(addr)		NULL
+#define pud_set_fixmap_offset(pgdp, addr)	((pud_t *)pgdp)
+#define pud_clear_fixmap()
+
+#define pud_offset_kimg(dir,addr)	((pud_t *)dir)
+
 #endif  /* CONFIG_PGTABLE_LEVELS > 3 */
 
 #define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
@@ -509,11 +499,16 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
 /* to find an entry in a page-table-directory */
 #define pgd_index(addr)		(((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
 
-#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
+#define pgd_offset_raw(pgd, addr)	((pgd) + pgd_index(addr))
+
+#define pgd_offset(mm, addr)	(pgd_offset_raw((mm)->pgd, (addr)))
 
 /* to find an entry in a kernel page-table-directory */
 #define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
 
+#define pgd_set_fixmap(addr)	((pgd_t *)set_fixmap_offset(FIX_PGD, addr))
+#define pgd_clear_fixmap()	clear_fixmap(FIX_PGD)
+
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
 	const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY |
@@ -633,6 +628,7 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD];
  *	bits 0-1:	present (must be zero)
  *	bits 2-7:	swap type
  *	bits 8-57:	swap offset
+ *	bit  58:	PTE_PROT_NONE (must be zero)
  */
 #define __SWP_TYPE_SHIFT	2
 #define __SWP_TYPE_BITS		6
@@ -658,7 +654,8 @@ extern int kern_addr_valid(unsigned long addr);
 
 #include <asm-generic/pgtable.h>
 
-#define pgtable_cache_init() do { } while (0)
+void pgd_cache_init(void);
+#define pgtable_cache_init	pgd_cache_init
 
 /*
  * On AArch64, the cache coherency is handled via the set_pte_at() function.
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 4acb7ca94fcd..cef1cf398356 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -29,8 +29,10 @@
 
 #include <linux/string.h>
 
+#include <asm/alternative.h>
 #include <asm/fpsimd.h>
 #include <asm/hw_breakpoint.h>
+#include <asm/lse.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
@@ -177,9 +179,11 @@ static inline void prefetchw(const void *ptr)
 }
 
 #define ARCH_HAS_SPINLOCK_PREFETCH
-static inline void spin_lock_prefetch(const void *x)
+static inline void spin_lock_prefetch(const void *ptr)
 {
-	prefetchw(x);
+	asm volatile(ARM64_LSE_ATOMIC_INSN(
+		     "prfm pstl1strm, %a0",
+		     "nop") : : "p" (ptr));
 }
 
 #define HAVE_ARCH_PICK_MMAP_LAYOUT
@@ -187,5 +191,6 @@ static inline void spin_lock_prefetch(const void *x)
 #endif
 
 void cpu_enable_pan(void *__unused);
+void cpu_enable_uao(void *__unused);
 
 #endif /* __ASM_PROCESSOR_H */
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index e9e5467e0bf4..a307eb6e7fa8 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -58,6 +58,7 @@
 #define COMPAT_PSR_Z_BIT	0x40000000
 #define COMPAT_PSR_N_BIT	0x80000000
 #define COMPAT_PSR_IT_MASK	0x0600fc00	/* If-Then execution state mask */
+#define COMPAT_PSR_GE_MASK	0x000f0000
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
 #define COMPAT_PSR_ENDSTATE	COMPAT_PSR_E_BIT
@@ -151,35 +152,9 @@ static inline unsigned long regs_return_value(struct pt_regs *regs)
 	return regs->regs[0];
 }
 
-/*
- * Are the current registers suitable for user mode? (used to maintain
- * security in signal handlers)
- */
-static inline int valid_user_regs(struct user_pt_regs *regs)
-{
-	if (user_mode(regs) && (regs->pstate & PSR_I_BIT) == 0) {
-		regs->pstate &= ~(PSR_F_BIT | PSR_A_BIT);
-
-		/* The T bit is reserved for AArch64 */
-		if (!(regs->pstate & PSR_MODE32_BIT))
-			regs->pstate &= ~COMPAT_PSR_T_BIT;
-
-		return 1;
-	}
-
-	/*
-	 * Force PSR to something logical...
-	 */
-	regs->pstate &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | \
-			COMPAT_PSR_T_BIT | PSR_MODE32_BIT;
-
-	if (!(regs->pstate & PSR_MODE32_BIT)) {
-		regs->pstate &= ~COMPAT_PSR_T_BIT;
-		regs->pstate |= PSR_MODE_EL0t;
-	}
-
-	return 0;
-}
+/* We must avoid circular header include via sched.h */
+struct task_struct;
+int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task);
 
 #define instruction_pointer(regs)	((unsigned long)(regs)->pc)
 
diff --git a/arch/arm64/include/asm/shmparam.h b/arch/arm64/include/asm/shmparam.h
index 4df608a8459e..e368a55ebd22 100644
--- a/arch/arm64/include/asm/shmparam.h
+++ b/arch/arm64/include/asm/shmparam.h
@@ -21,7 +21,7 @@
  * alignment value. Since we don't have aliasing D-caches, the rest of
  * the time we can safely use PAGE_SIZE.
  */
-#define COMPAT_SHMLBA	0x4000
+#define COMPAT_SHMLBA	(4 * PAGE_SIZE)
 
 #include <asm-generic/shmparam.h>
 
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index d9c3d6a6100a..817a067ba058 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -16,6 +16,19 @@
 #ifndef __ASM_SMP_H
 #define __ASM_SMP_H
 
+/* Values for secondary_data.status */
+
+#define CPU_MMU_OFF		(-1)
+#define CPU_BOOT_SUCCESS	(0)
+/* The cpu invoked ops->cpu_die, synchronise it with cpu_kill */
+#define CPU_KILL_ME		(1)
+/* The cpu couldn't die gracefully and is looping in the kernel */
+#define CPU_STUCK_IN_KERNEL	(2)
+/* Fatal system error detected by secondary CPU, crash the system */
+#define CPU_PANIC_KERNEL	(3)
+
+#ifndef __ASSEMBLY__
+
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/thread_info.h>
@@ -54,19 +67,52 @@ asmlinkage void secondary_start_kernel(void);
 
 /*
  * Initial data for bringing up a secondary CPU.
+ * @stack  - sp for the secondary CPU
+ * @status - Result passed back from the secondary CPU to
+ *           indicate failure.
  */
 struct secondary_data {
 	void *stack;
+	long status;
 };
+
 extern struct secondary_data secondary_data;
+extern long __early_cpu_boot_status;
 extern void secondary_entry(void);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+extern void arch_send_wakeup_ipi_mask(const struct cpumask *mask);
+#else
+static inline void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
+{
+	BUILD_BUG();
+}
+#endif
+
 extern int __cpu_disable(void);
 
 extern void __cpu_die(unsigned int cpu);
 extern void cpu_die(void);
+extern void cpu_die_early(void);
+
+static inline void cpu_park_loop(void)
+{
+	for (;;) {
+		wfe();
+		wfi();
+	}
+}
+
+static inline void update_cpu_boot_status(int val)
+{
+	WRITE_ONCE(secondary_data.status, val);
+	/* Ensure the visibility of the status update */
+	dsb(ishst);
+}
+
+#endif /* ifndef __ASSEMBLY__ */
 
 #endif /* ifndef __ASM_SMP_H */
diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h
index c85e96d174a5..fc9682bfe002 100644
--- a/arch/arm64/include/asm/spinlock.h
+++ b/arch/arm64/include/asm/spinlock.h
@@ -26,9 +26,28 @@
  * The memory barriers are implicit with the load-acquire and store-release
  * instructions.
  */
+static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
+{
+	unsigned int tmp;
+	arch_spinlock_t lockval;
 
-#define arch_spin_unlock_wait(lock) \
-	do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
+	asm volatile(
+"	sevl\n"
+"1:	wfe\n"
+"2:	ldaxr	%w0, %2\n"
+"	eor	%w1, %w0, %w0, ror #16\n"
+"	cbnz	%w1, 1b\n"
+	ARM64_LSE_ATOMIC_INSN(
+	/* LL/SC */
+"	stxr	%w1, %w0, %2\n"
+"	cbnz	%w1, 2b\n", /* Serialise against any concurrent lockers */
+	/* LSE atomics */
+"	nop\n"
+"	nop\n")
+	: "=&r" (lockval), "=&r" (tmp), "+Q" (*lock)
+	:
+	: "memory");
+}
 
 #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
 
diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h
index 7318f6d54aa9..801a16dbbdf6 100644
--- a/arch/arm64/include/asm/stacktrace.h
+++ b/arch/arm64/include/asm/stacktrace.h
@@ -16,14 +16,19 @@
 #ifndef __ASM_STACKTRACE_H
 #define __ASM_STACKTRACE_H
 
+struct task_struct;
+
 struct stackframe {
 	unsigned long fp;
 	unsigned long sp;
 	unsigned long pc;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	unsigned int graph;
+#endif
 };
 
-extern int unwind_frame(struct stackframe *frame);
-extern void walk_stackframe(struct stackframe *frame,
+extern int unwind_frame(struct task_struct *tsk, struct stackframe *frame);
+extern void walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
 			    int (*fn)(struct stackframe *, void *), void *data);
 
 #endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index d48ab5b41f52..12874164b0ae 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -20,6 +20,8 @@
 #ifndef __ASM_SYSREG_H
 #define __ASM_SYSREG_H
 
+#include <linux/stringify.h>
+
 #include <asm/opcodes.h>
 
 /*
@@ -70,15 +72,19 @@
 
 #define SYS_ID_AA64MMFR0_EL1		sys_reg(3, 0, 0, 7, 0)
 #define SYS_ID_AA64MMFR1_EL1		sys_reg(3, 0, 0, 7, 1)
+#define SYS_ID_AA64MMFR2_EL1		sys_reg(3, 0, 0, 7, 2)
 
 #define SYS_CNTFRQ_EL0			sys_reg(3, 3, 14, 0, 0)
 #define SYS_CTR_EL0			sys_reg(3, 3, 0, 0, 1)
 #define SYS_DCZID_EL0			sys_reg(3, 3, 0, 0, 7)
 
 #define REG_PSTATE_PAN_IMM		sys_reg(0, 0, 4, 0, 4)
+#define REG_PSTATE_UAO_IMM		sys_reg(0, 0, 4, 0, 3)
 
 #define SET_PSTATE_PAN(x) __inst_arm(0xd5000000 | REG_PSTATE_PAN_IMM |\
 				     (!!x)<<8 | 0x1f)
+#define SET_PSTATE_UAO(x) __inst_arm(0xd5000000 | REG_PSTATE_UAO_IMM |\
+				     (!!x)<<8 | 0x1f)
 
 /* SCTLR_EL1 */
 #define SCTLR_EL1_CP15BEN	(0x1 << 5)
@@ -135,6 +141,12 @@
 #define ID_AA64MMFR1_VMIDBITS_SHIFT	4
 #define ID_AA64MMFR1_HADBS_SHIFT	0
 
+#define ID_AA64MMFR1_VMIDBITS_8		0
+#define ID_AA64MMFR1_VMIDBITS_16	2
+
+/* id_aa64mmfr2 */
+#define ID_AA64MMFR2_UAO_SHIFT		4
+
 /* id_aa64dfr0 */
 #define ID_AA64DFR0_CTX_CMPS_SHIFT	28
 #define ID_AA64DFR0_WRPS_SHIFT		20
@@ -194,32 +206,34 @@
 #ifdef __ASSEMBLY__
 
 	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30
-	.equ	__reg_num_x\num, \num
+	.equ	.L__reg_num_x\num, \num
 	.endr
-	.equ	__reg_num_xzr, 31
+	.equ	.L__reg_num_xzr, 31
 
 	.macro	mrs_s, rt, sreg
-	.inst	0xd5200000|(\sreg)|(__reg_num_\rt)
+	.inst	0xd5200000|(\sreg)|(.L__reg_num_\rt)
 	.endm
 
 	.macro	msr_s, sreg, rt
-	.inst	0xd5000000|(\sreg)|(__reg_num_\rt)
+	.inst	0xd5000000|(\sreg)|(.L__reg_num_\rt)
 	.endm
 
 #else
 
+#include <linux/types.h>
+
 asm(
 "	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30\n"
-"	.equ	__reg_num_x\\num, \\num\n"
+"	.equ	.L__reg_num_x\\num, \\num\n"
 "	.endr\n"
-"	.equ	__reg_num_xzr, 31\n"
+"	.equ	.L__reg_num_xzr, 31\n"
 "\n"
 "	.macro	mrs_s, rt, sreg\n"
-"	.inst	0xd5200000|(\\sreg)|(__reg_num_\\rt)\n"
+"	.inst	0xd5200000|(\\sreg)|(.L__reg_num_\\rt)\n"
 "	.endm\n"
 "\n"
 "	.macro	msr_s, sreg, rt\n"
-"	.inst	0xd5000000|(\\sreg)|(__reg_num_\\rt)\n"
+"	.inst	0xd5000000|(\\sreg)|(.L__reg_num_\\rt)\n"
 "	.endm\n"
 );
 
@@ -232,6 +246,23 @@ static inline void config_sctlr_el1(u32 clear, u32 set)
 	val |= set;
 	asm volatile("msr sctlr_el1, %0" : : "r" (val));
 }
+
+/*
+ * Unlike read_cpuid, calls to read_sysreg are never expected to be
+ * optimized away or replaced with synthetic values.
+ */
+#define read_sysreg(r) ({					\
+	u64 __val;						\
+	asm volatile("mrs %0, " __stringify(r) : "=r" (__val));	\
+	__val;							\
+})
+
+#define write_sysreg(v, r) do {					\
+	u64 __val = (u64)v;					\
+	asm volatile("msr " __stringify(r) ", %0"		\
+		     : : "r" (__val));				\
+} while (0)
+
 #endif
 
 #endif	/* __ASM_SYSREG_H */
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 90c7ff233735..abd64bd1f6d9 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -73,10 +73,16 @@ register unsigned long current_stack_pointer asm ("sp");
  */
 static inline struct thread_info *current_thread_info(void) __attribute_const__;
 
+/*
+ * struct thread_info can be accessed directly via sp_el0.
+ */
 static inline struct thread_info *current_thread_info(void)
 {
-	return (struct thread_info *)
-		(current_stack_pointer & ~(THREAD_SIZE - 1));
+	unsigned long sp_el0;
+
+	asm ("mrs %0, sp_el0" : "=r" (sp_el0));
+
+	return (struct thread_info *)sp_el0;
 }
 
 #define thread_saved_pc(tsk)	\
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index b2ede967fe7d..0685d74572af 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -36,11 +36,11 @@
 #define VERIFY_WRITE 1
 
 /*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
+ * The exception table consists of pairs of relative offsets: the first
+ * is the relative offset to an instruction that is allowed to fault,
+ * and the second is the relative offset at which the program should
+ * continue. No registers are modified, so it is entirely up to the
+ * continuation code to figure out what to do.
  *
  * All the routines below use bits of fixup code that are out of line
  * with the main instruction path.  This means when everything is well,
@@ -50,9 +50,11 @@
 
 struct exception_table_entry
 {
-	unsigned long insn, fixup;
+	int insn, fixup;
 };
 
+#define ARCH_HAS_RELATIVE_EXTABLE
+
 extern int fixup_exception(struct pt_regs *regs);
 
 #define KERNEL_DS	(-1UL)
@@ -64,6 +66,16 @@ extern int fixup_exception(struct pt_regs *regs);
 static inline void set_fs(mm_segment_t fs)
 {
 	current_thread_info()->addr_limit = fs;
+
+	/*
+	 * Enable/disable UAO so that copy_to_user() etc can access
+	 * kernel memory with the unprivileged instructions.
+	 */
+	if (IS_ENABLED(CONFIG_ARM64_UAO) && fs == KERNEL_DS)
+		asm(ALTERNATIVE("nop", SET_PSTATE_UAO(1), ARM64_HAS_UAO));
+	else
+		asm(ALTERNATIVE("nop", SET_PSTATE_UAO(0), ARM64_HAS_UAO,
+				CONFIG_ARM64_UAO));
 }
 
 #define segment_eq(a, b)	((a) == (b))
@@ -105,6 +117,12 @@ static inline void set_fs(mm_segment_t fs)
 #define access_ok(type, addr, size)	__range_ok(addr, size)
 #define user_addr_max			get_fs
 
+#define _ASM_EXTABLE(from, to)						\
+	"	.pushsection	__ex_table, \"a\"\n"			\
+	"	.align		3\n"					\
+	"	.long		(" #from " - .), (" #to " - .)\n"	\
+	"	.popsection\n"
+
 /*
  * The "__xxx" versions of the user access functions do not verify the address
  * space - it must have been done previously with a separate "access_ok()"
@@ -113,9 +131,10 @@ static inline void set_fs(mm_segment_t fs)
  * The "__xxx_error" versions set the third argument to -EFAULT if an error
  * occurs, and leave it unchanged on success.
  */
-#define __get_user_asm(instr, reg, x, addr, err)			\
+#define __get_user_asm(instr, alt_instr, reg, x, addr, err, feature)	\
 	asm volatile(							\
-	"1:	" instr "	" reg "1, [%2]\n"			\
+	"1:"ALTERNATIVE(instr "     " reg "1, [%2]\n",			\
+			alt_instr " " reg "1, [%2]\n", feature)		\
 	"2:\n"								\
 	"	.section .fixup, \"ax\"\n"				\
 	"	.align	2\n"						\
@@ -123,10 +142,7 @@ static inline void set_fs(mm_segment_t fs)
 	"	mov	%1, #0\n"					\
 	"	b	2b\n"						\
 	"	.previous\n"						\
-	"	.section __ex_table,\"a\"\n"				\
-	"	.align	3\n"						\
-	"	.quad	1b, 3b\n"					\
-	"	.previous"						\
+	_ASM_EXTABLE(1b, 3b)						\
 	: "+r" (err), "=&r" (x)						\
 	: "r" (addr), "i" (-EFAULT))
 
@@ -134,26 +150,30 @@ static inline void set_fs(mm_segment_t fs)
 do {									\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
-	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN,	\
+	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_ALT_PAN_NOT_UAO,\
 			CONFIG_ARM64_PAN));				\
 	switch (sizeof(*(ptr))) {					\
 	case 1:								\
-		__get_user_asm("ldrb", "%w", __gu_val, (ptr), (err));	\
+		__get_user_asm("ldrb", "ldtrb", "%w", __gu_val, (ptr),  \
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	case 2:								\
-		__get_user_asm("ldrh", "%w", __gu_val, (ptr), (err));	\
+		__get_user_asm("ldrh", "ldtrh", "%w", __gu_val, (ptr),  \
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	case 4:								\
-		__get_user_asm("ldr", "%w", __gu_val, (ptr), (err));	\
+		__get_user_asm("ldr", "ldtr", "%w", __gu_val, (ptr),	\
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	case 8:								\
-		__get_user_asm("ldr", "%",  __gu_val, (ptr), (err));	\
+		__get_user_asm("ldr", "ldtr", "%",  __gu_val, (ptr),	\
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	default:							\
 		BUILD_BUG();						\
 	}								\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
-	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN,	\
+	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_ALT_PAN_NOT_UAO,\
 			CONFIG_ARM64_PAN));				\
 } while (0)
 
@@ -181,19 +201,17 @@ do {									\
 		((x) = 0, -EFAULT);					\
 })
 
-#define __put_user_asm(instr, reg, x, addr, err)			\
+#define __put_user_asm(instr, alt_instr, reg, x, addr, err, feature)	\
 	asm volatile(							\
-	"1:	" instr "	" reg "1, [%2]\n"			\
+	"1:"ALTERNATIVE(instr "     " reg "1, [%2]\n",			\
+			alt_instr " " reg "1, [%2]\n", feature)		\
 	"2:\n"								\
 	"	.section .fixup,\"ax\"\n"				\
 	"	.align	2\n"						\
 	"3:	mov	%w0, %3\n"					\
 	"	b	2b\n"						\
 	"	.previous\n"						\
-	"	.section __ex_table,\"a\"\n"				\
-	"	.align	3\n"						\
-	"	.quad	1b, 3b\n"					\
-	"	.previous"						\
+	_ASM_EXTABLE(1b, 3b)						\
 	: "+r" (err)							\
 	: "r" (x), "r" (addr), "i" (-EFAULT))
 
@@ -201,25 +219,29 @@ do {									\
 do {									\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
-	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN,	\
+	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_ALT_PAN_NOT_UAO,\
 			CONFIG_ARM64_PAN));				\
 	switch (sizeof(*(ptr))) {					\
 	case 1:								\
-		__put_user_asm("strb", "%w", __pu_val, (ptr), (err));	\
+		__put_user_asm("strb", "sttrb", "%w", __pu_val, (ptr),	\
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	case 2:								\
-		__put_user_asm("strh", "%w", __pu_val, (ptr), (err));	\
+		__put_user_asm("strh", "sttrh", "%w", __pu_val, (ptr),	\
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	case 4:								\
-		__put_user_asm("str",  "%w", __pu_val, (ptr), (err));	\
+		__put_user_asm("str", "sttr", "%w", __pu_val, (ptr),	\
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	case 8:								\
-		__put_user_asm("str",  "%", __pu_val, (ptr), (err));	\
+		__put_user_asm("str", "sttr", "%", __pu_val, (ptr),	\
+			       (err), ARM64_HAS_UAO);			\
 		break;							\
 	default:							\
 		BUILD_BUG();						\
 	}								\
-	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN,	\
+	asm(ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_ALT_PAN_NOT_UAO,\
 			CONFIG_ARM64_PAN));				\
 } while (0)
 
diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h
index 7a5df5252dd7..9f22dd607958 100644
--- a/arch/arm64/include/asm/virt.h
+++ b/arch/arm64/include/asm/virt.h
@@ -23,6 +23,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/ptrace.h>
+
 /*
  * __boot_cpu_mode records what mode CPUs were booted in.
  * A correctly-implemented bootloader must start all CPUs in the same mode:
@@ -50,6 +52,14 @@ static inline bool is_hyp_mode_mismatched(void)
 	return __boot_cpu_mode[0] != __boot_cpu_mode[1];
 }
 
+static inline bool is_kernel_in_hyp_mode(void)
+{
+	u64 el;
+
+	asm("mrs %0, CurrentEL" : "=r" (el));
+	return el == CurrentEL_EL2;
+}
+
 /* The section containing the hypervisor text */
 extern char __hyp_text_start[];
 extern char __hyp_text_end[];
diff --git a/arch/arm64/include/asm/word-at-a-time.h b/arch/arm64/include/asm/word-at-a-time.h
index aab5bf09e9d9..2b79b8a89457 100644
--- a/arch/arm64/include/asm/word-at-a-time.h
+++ b/arch/arm64/include/asm/word-at-a-time.h
@@ -16,6 +16,8 @@
 #ifndef __ASM_WORD_AT_A_TIME_H
 #define __ASM_WORD_AT_A_TIME_H
 
+#include <asm/uaccess.h>
+
 #ifndef __AARCH64EB__
 
 #include <linux/kernel.h>
@@ -81,10 +83,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr)
 #endif
 	"	b	2b\n"
 	"	.popsection\n"
-	"	.pushsection __ex_table,\"a\"\n"
-	"	.align	3\n"
-	"	.quad	1b, 3b\n"
-	"	.popsection"
+	_ASM_EXTABLE(1b, 3b)
 	: "=&r" (ret), "=&r" (offset)
 	: "r" (addr), "Q" (*(unsigned long *)addr));
 
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 361c8a8ef55f..a739287ef6a3 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -28,5 +28,7 @@
 #define HWCAP_SHA2		(1 << 6)
 #define HWCAP_CRC32		(1 << 7)
 #define HWCAP_ATOMICS		(1 << 8)
+#define HWCAP_FPHP		(1 << 9)
+#define HWCAP_ASIMDHP		(1 << 10)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index 0cd7b5947dfc..f209ea151dca 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -32,7 +32,7 @@
 
 #ifndef __ASSEMBLY__
 #include <linux/psci.h>
-#include <asm/types.h>
+#include <linux/types.h>
 #include <asm/ptrace.h>
 
 #define __KVM_HAVE_GUEST_DEBUG
@@ -94,6 +94,7 @@ struct kvm_regs {
 #define KVM_ARM_VCPU_POWER_OFF		0 /* CPU is started in OFF state */
 #define KVM_ARM_VCPU_EL1_32BIT		1 /* CPU running a 32bit VM */
 #define KVM_ARM_VCPU_PSCI_0_2		2 /* CPU uses PSCI v0.2 */
+#define KVM_ARM_VCPU_PMU_V3		3 /* Support guest PMUv3 */
 
 struct kvm_vcpu_init {
 	__u32 target;
@@ -204,6 +205,11 @@ struct kvm_arch_memory_slot {
 #define KVM_DEV_ARM_VGIC_GRP_CTRL	4
 #define   KVM_DEV_ARM_VGIC_CTRL_INIT	0
 
+/* Device Control API on vcpu fd */
+#define KVM_ARM_VCPU_PMU_V3_CTRL	0
+#define   KVM_ARM_VCPU_PMU_V3_IRQ	0
+#define   KVM_ARM_VCPU_PMU_V3_INIT	1
+
 /* KVM_IRQ_LINE irq field index values */
 #define KVM_ARM_IRQ_TYPE_SHIFT		24
 #define KVM_ARM_IRQ_TYPE_MASK		0xff
diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h
index 208db3df135a..b5c3933ed441 100644
--- a/arch/arm64/include/uapi/asm/ptrace.h
+++ b/arch/arm64/include/uapi/asm/ptrace.h
@@ -45,6 +45,7 @@
 #define PSR_A_BIT	0x00000100
 #define PSR_D_BIT	0x00000200
 #define PSR_PAN_BIT	0x00400000
+#define PSR_UAO_BIT	0x00800000
 #define PSR_Q_BIT	0x08000000
 #define PSR_V_BIT	0x10000000
 #define PSR_C_BIT	0x20000000
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 474691f8b13a..3793003e16a2 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -14,10 +14,10 @@ CFLAGS_REMOVE_return_address.o = -pg
 arm64-obj-y		:= debug-monitors.o entry.o irq.o fpsimd.o		\
 			   entry-fpsimd.o process.o ptrace.o setup.o signal.o	\
 			   sys.o stacktrace.o time.o traps.o io.o vdso.o	\
-			   hyp-stub.o psci.o psci-call.o cpu_ops.o insn.o	\
+			   hyp-stub.o psci.o cpu_ops.o insn.o	\
 			   return_address.o cpuinfo.o cpu_errata.o		\
 			   cpufeature.o alternative.o cacheinfo.o		\
-			   smp.o smp_spin_table.o topology.o
+			   smp.o smp_spin_table.o topology.o smccc-call.o
 
 extra-$(CONFIG_EFI)			:= efi-entry.o
 
@@ -30,6 +30,7 @@ arm64-obj-$(CONFIG_COMPAT)		+= sys32.o kuser32.o signal32.o 	\
 					   ../../arm/kernel/opcodes.o
 arm64-obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o entry-ftrace.o
 arm64-obj-$(CONFIG_MODULES)		+= arm64ksyms.o module.o
+arm64-obj-$(CONFIG_ARM64_MODULE_PLTS)	+= module-plts.o
 arm64-obj-$(CONFIG_PERF_EVENTS)		+= perf_regs.o perf_callchain.o
 arm64-obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
 arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
@@ -41,6 +42,9 @@ arm64-obj-$(CONFIG_EFI)			+= efi.o efi-entry.stub.o
 arm64-obj-$(CONFIG_PCI)			+= pci.o
 arm64-obj-$(CONFIG_ARMV8_DEPRECATED)	+= armv8_deprecated.o
 arm64-obj-$(CONFIG_ACPI)		+= acpi.o
+arm64-obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL)	+= acpi_parking_protocol.o
+arm64-obj-$(CONFIG_PARAVIRT)		+= paravirt.o
+arm64-obj-$(CONFIG_RANDOMIZE_BASE)	+= kaslr.o
 
 obj-y					+= $(arm64-obj-y) vdso/
 obj-m					+= $(arm64-obj-m)
diff --git a/arch/arm64/kernel/acpi_parking_protocol.c b/arch/arm64/kernel/acpi_parking_protocol.c
new file mode 100644
index 000000000000..a32b4011d711
--- /dev/null
+++ b/arch/arm64/kernel/acpi_parking_protocol.c
@@ -0,0 +1,141 @@
+/*
+ * ARM64 ACPI Parking Protocol implementation
+ *
+ * Authors: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *	    Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/acpi.h>
+#include <linux/types.h>
+
+#include <asm/cpu_ops.h>
+
+struct parking_protocol_mailbox {
+	__le32 cpu_id;
+	__le32 reserved;
+	__le64 entry_point;
+};
+
+struct cpu_mailbox_entry {
+	struct parking_protocol_mailbox __iomem *mailbox;
+	phys_addr_t mailbox_addr;
+	u8 version;
+	u8 gic_cpu_id;
+};
+
+static struct cpu_mailbox_entry cpu_mailbox_entries[NR_CPUS];
+
+void __init acpi_set_mailbox_entry(int cpu,
+				   struct acpi_madt_generic_interrupt *p)
+{
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+
+	cpu_entry->mailbox_addr = p->parked_address;
+	cpu_entry->version = p->parking_version;
+	cpu_entry->gic_cpu_id = p->cpu_interface_number;
+}
+
+bool acpi_parking_protocol_valid(int cpu)
+{
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+
+	return cpu_entry->mailbox_addr && cpu_entry->version;
+}
+
+static int acpi_parking_protocol_cpu_init(unsigned int cpu)
+{
+	pr_debug("%s: ACPI parked addr=%llx\n", __func__,
+		  cpu_mailbox_entries[cpu].mailbox_addr);
+
+	return 0;
+}
+
+static int acpi_parking_protocol_cpu_prepare(unsigned int cpu)
+{
+	return 0;
+}
+
+static int acpi_parking_protocol_cpu_boot(unsigned int cpu)
+{
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+	struct parking_protocol_mailbox __iomem *mailbox;
+	__le32 cpu_id;
+
+	/*
+	 * Map mailbox memory with attribute device nGnRE (ie ioremap -
+	 * this deviates from the parking protocol specifications since
+	 * the mailboxes are required to be mapped nGnRnE; the attribute
+	 * discrepancy is harmless insofar as the protocol specification
+	 * is concerned).
+	 * If the mailbox is mistakenly allocated in the linear mapping
+	 * by FW ioremap will fail since the mapping will be prevented
+	 * by the kernel (it clashes with the linear mapping attributes
+	 * specifications).
+	 */
+	mailbox = ioremap(cpu_entry->mailbox_addr, sizeof(*mailbox));
+	if (!mailbox)
+		return -EIO;
+
+	cpu_id = readl_relaxed(&mailbox->cpu_id);
+	/*
+	 * Check if firmware has set-up the mailbox entry properly
+	 * before kickstarting the respective cpu.
+	 */
+	if (cpu_id != ~0U) {
+		iounmap(mailbox);
+		return -ENXIO;
+	}
+
+	/*
+	 * stash the mailbox address mapping to use it for further FW
+	 * checks in the postboot method
+	 */
+	cpu_entry->mailbox = mailbox;
+
+	/*
+	 * We write the entry point and cpu id as LE regardless of the
+	 * native endianness of the kernel. Therefore, any boot-loaders
+	 * that read this address need to convert this address to the
+	 * Boot-Loader's endianness before jumping.
+	 */
+	writeq_relaxed(__pa(secondary_entry), &mailbox->entry_point);
+	writel_relaxed(cpu_entry->gic_cpu_id, &mailbox->cpu_id);
+
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	return 0;
+}
+
+static void acpi_parking_protocol_cpu_postboot(void)
+{
+	int cpu = smp_processor_id();
+	struct cpu_mailbox_entry *cpu_entry = &cpu_mailbox_entries[cpu];
+	struct parking_protocol_mailbox __iomem *mailbox = cpu_entry->mailbox;
+	__le64 entry_point;
+
+	entry_point = readl_relaxed(&mailbox->entry_point);
+	/*
+	 * Check if firmware has cleared the entry_point as expected
+	 * by the protocol specification.
+	 */
+	WARN_ON(entry_point);
+}
+
+const struct cpu_operations acpi_parking_protocol_ops = {
+	.name		= "parking-protocol",
+	.cpu_init	= acpi_parking_protocol_cpu_init,
+	.cpu_prepare	= acpi_parking_protocol_cpu_prepare,
+	.cpu_boot	= acpi_parking_protocol_cpu_boot,
+	.cpu_postboot	= acpi_parking_protocol_cpu_postboot
+};
diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
index ab9db0e9818c..d2ee1b21a10d 100644
--- a/arch/arm64/kernel/alternative.c
+++ b/arch/arm64/kernel/alternative.c
@@ -158,9 +158,3 @@ void apply_alternatives(void *start, size_t length)
 
 	__apply_alternatives(&region);
 }
-
-void free_alternatives_memory(void)
-{
-	free_reserved_area(__alt_instructions, __alt_instructions_end,
-			   0, "alternatives");
-}
diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c
index 3b6d8cc9dfe0..678f30b05a45 100644
--- a/arch/arm64/kernel/arm64ksyms.c
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -26,6 +26,7 @@
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
 #include <linux/io.h>
+#include <linux/arm-smccc.h>
 
 #include <asm/checksum.h>
 
@@ -68,3 +69,7 @@ EXPORT_SYMBOL(test_and_change_bit);
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(_mcount);
 #endif
+
+	/* arm-smccc */
+EXPORT_SYMBOL(arm_smccc_smc);
+EXPORT_SYMBOL(arm_smccc_hvc);
diff --git a/arch/arm64/kernel/armv8_deprecated.c b/arch/arm64/kernel/armv8_deprecated.c
index 937f5e58a4d3..c37202c0c838 100644
--- a/arch/arm64/kernel/armv8_deprecated.c
+++ b/arch/arm64/kernel/armv8_deprecated.c
@@ -62,7 +62,7 @@ struct insn_emulation {
 };
 
 static LIST_HEAD(insn_emulation);
-static int nr_insn_emulated;
+static int nr_insn_emulated __initdata;
 static DEFINE_RAW_SPINLOCK(insn_emulation_lock);
 
 static void register_emulation_hooks(struct insn_emulation_ops *ops)
@@ -173,7 +173,7 @@ static int update_insn_emulation_mode(struct insn_emulation *insn,
 	return ret;
 }
 
-static void register_insn_emulation(struct insn_emulation_ops *ops)
+static void __init register_insn_emulation(struct insn_emulation_ops *ops)
 {
 	unsigned long flags;
 	struct insn_emulation *insn;
@@ -237,7 +237,7 @@ static struct ctl_table ctl_abi[] = {
 	{ }
 };
 
-static void register_insn_emulation_sysctl(struct ctl_table *table)
+static void __init register_insn_emulation_sysctl(struct ctl_table *table)
 {
 	unsigned long flags;
 	int i = 0;
@@ -297,11 +297,8 @@ static void register_insn_emulation_sysctl(struct ctl_table *table)
 	"4:	mov		%w0, %w5\n"			\
 	"	b		3b\n"				\
 	"	.popsection"					\
-	"	.pushsection	 __ex_table,\"a\"\n"		\
-	"	.align		3\n"				\
-	"	.quad		0b, 4b\n"			\
-	"	.quad		1b, 4b\n"			\
-	"	.popsection\n"					\
+	_ASM_EXTABLE(0b, 4b)					\
+	_ASM_EXTABLE(1b, 4b)					\
 	ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN,	\
 		CONFIG_ARM64_PAN)				\
 	: "=&r" (res), "+r" (data), "=&r" (temp)		\
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 25de8b244961..3ae6b310ac9b 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -28,6 +28,7 @@
 #include <asm/suspend.h>
 #include <asm/vdso_datapage.h>
 #include <linux/kbuild.h>
+#include <linux/arm-smccc.h>
 
 int main(void)
 {
@@ -103,54 +104,15 @@ int main(void)
   DEFINE(TZ_MINWEST,		offsetof(struct timezone, tz_minuteswest));
   DEFINE(TZ_DSTTIME,		offsetof(struct timezone, tz_dsttime));
   BLANK();
+  DEFINE(CPU_BOOT_STACK,	offsetof(struct secondary_data, stack));
+  BLANK();
 #ifdef CONFIG_KVM_ARM_HOST
   DEFINE(VCPU_CONTEXT,		offsetof(struct kvm_vcpu, arch.ctxt));
   DEFINE(CPU_GP_REGS,		offsetof(struct kvm_cpu_context, gp_regs));
   DEFINE(CPU_USER_PT_REGS,	offsetof(struct kvm_regs, regs));
   DEFINE(CPU_FP_REGS,		offsetof(struct kvm_regs, fp_regs));
-  DEFINE(CPU_SP_EL1,		offsetof(struct kvm_regs, sp_el1));
-  DEFINE(CPU_ELR_EL1,		offsetof(struct kvm_regs, elr_el1));
-  DEFINE(CPU_SPSR,		offsetof(struct kvm_regs, spsr));
-  DEFINE(CPU_SYSREGS,		offsetof(struct kvm_cpu_context, sys_regs));
-  DEFINE(VCPU_ESR_EL2,		offsetof(struct kvm_vcpu, arch.fault.esr_el2));
-  DEFINE(VCPU_FAR_EL2,		offsetof(struct kvm_vcpu, arch.fault.far_el2));
-  DEFINE(VCPU_HPFAR_EL2,	offsetof(struct kvm_vcpu, arch.fault.hpfar_el2));
-  DEFINE(VCPU_DEBUG_FLAGS,	offsetof(struct kvm_vcpu, arch.debug_flags));
-  DEFINE(VCPU_DEBUG_PTR,	offsetof(struct kvm_vcpu, arch.debug_ptr));
-  DEFINE(DEBUG_BCR, 		offsetof(struct kvm_guest_debug_arch, dbg_bcr));
-  DEFINE(DEBUG_BVR, 		offsetof(struct kvm_guest_debug_arch, dbg_bvr));
-  DEFINE(DEBUG_WCR, 		offsetof(struct kvm_guest_debug_arch, dbg_wcr));
-  DEFINE(DEBUG_WVR, 		offsetof(struct kvm_guest_debug_arch, dbg_wvr));
-  DEFINE(VCPU_HCR_EL2,		offsetof(struct kvm_vcpu, arch.hcr_el2));
-  DEFINE(VCPU_MDCR_EL2,	offsetof(struct kvm_vcpu, arch.mdcr_el2));
-  DEFINE(VCPU_IRQ_LINES,	offsetof(struct kvm_vcpu, arch.irq_lines));
+  DEFINE(VCPU_FPEXC32_EL2,	offsetof(struct kvm_vcpu, arch.ctxt.sys_regs[FPEXC32_EL2]));
   DEFINE(VCPU_HOST_CONTEXT,	offsetof(struct kvm_vcpu, arch.host_cpu_context));
-  DEFINE(VCPU_HOST_DEBUG_STATE, offsetof(struct kvm_vcpu, arch.host_debug_state));
-  DEFINE(VCPU_TIMER_CNTV_CTL,	offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl));
-  DEFINE(VCPU_TIMER_CNTV_CVAL,	offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_cval));
-  DEFINE(KVM_TIMER_CNTVOFF,	offsetof(struct kvm, arch.timer.cntvoff));
-  DEFINE(KVM_TIMER_ENABLED,	offsetof(struct kvm, arch.timer.enabled));
-  DEFINE(VCPU_KVM,		offsetof(struct kvm_vcpu, kvm));
-  DEFINE(VCPU_VGIC_CPU,		offsetof(struct kvm_vcpu, arch.vgic_cpu));
-  DEFINE(VGIC_V2_CPU_HCR,	offsetof(struct vgic_cpu, vgic_v2.vgic_hcr));
-  DEFINE(VGIC_V2_CPU_VMCR,	offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr));
-  DEFINE(VGIC_V2_CPU_MISR,	offsetof(struct vgic_cpu, vgic_v2.vgic_misr));
-  DEFINE(VGIC_V2_CPU_EISR,	offsetof(struct vgic_cpu, vgic_v2.vgic_eisr));
-  DEFINE(VGIC_V2_CPU_ELRSR,	offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr));
-  DEFINE(VGIC_V2_CPU_APR,	offsetof(struct vgic_cpu, vgic_v2.vgic_apr));
-  DEFINE(VGIC_V2_CPU_LR,	offsetof(struct vgic_cpu, vgic_v2.vgic_lr));
-  DEFINE(VGIC_V3_CPU_SRE,	offsetof(struct vgic_cpu, vgic_v3.vgic_sre));
-  DEFINE(VGIC_V3_CPU_HCR,	offsetof(struct vgic_cpu, vgic_v3.vgic_hcr));
-  DEFINE(VGIC_V3_CPU_VMCR,	offsetof(struct vgic_cpu, vgic_v3.vgic_vmcr));
-  DEFINE(VGIC_V3_CPU_MISR,	offsetof(struct vgic_cpu, vgic_v3.vgic_misr));
-  DEFINE(VGIC_V3_CPU_EISR,	offsetof(struct vgic_cpu, vgic_v3.vgic_eisr));
-  DEFINE(VGIC_V3_CPU_ELRSR,	offsetof(struct vgic_cpu, vgic_v3.vgic_elrsr));
-  DEFINE(VGIC_V3_CPU_AP0R,	offsetof(struct vgic_cpu, vgic_v3.vgic_ap0r));
-  DEFINE(VGIC_V3_CPU_AP1R,	offsetof(struct vgic_cpu, vgic_v3.vgic_ap1r));
-  DEFINE(VGIC_V3_CPU_LR,	offsetof(struct vgic_cpu, vgic_v3.vgic_lr));
-  DEFINE(VGIC_CPU_NR_LR,	offsetof(struct vgic_cpu, nr_lr));
-  DEFINE(KVM_VTTBR,		offsetof(struct kvm, arch.vttbr));
-  DEFINE(KVM_VGIC_VCTRL,	offsetof(struct kvm, arch.vgic.vctrl_base));
 #endif
 #ifdef CONFIG_CPU_PM
   DEFINE(CPU_SUSPEND_SZ,	sizeof(struct cpu_suspend_ctx));
@@ -161,5 +123,7 @@ int main(void)
   DEFINE(SLEEP_SAVE_SP_PHYS,	offsetof(struct sleep_save_sp, save_ptr_stash_phys));
   DEFINE(SLEEP_SAVE_SP_VIRT,	offsetof(struct sleep_save_sp, save_ptr_stash));
 #endif
+  DEFINE(ARM_SMCCC_RES_X0_OFFS,	offsetof(struct arm_smccc_res, a0));
+  DEFINE(ARM_SMCCC_RES_X2_OFFS,	offsetof(struct arm_smccc_res, a2));
   return 0;
 }
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 24926f2504f7..06afd04e02c0 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -21,24 +21,12 @@
 #include <asm/cputype.h>
 #include <asm/cpufeature.h>
 
-#define MIDR_CORTEX_A53 MIDR_CPU_PART(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
-#define MIDR_CORTEX_A57 MIDR_CPU_PART(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
-#define MIDR_THUNDERX	MIDR_CPU_PART(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
-
-#define CPU_MODEL_MASK (MIDR_IMPLEMENTOR_MASK | MIDR_PARTNUM_MASK | \
-			MIDR_ARCHITECTURE_MASK)
-
 static bool __maybe_unused
 is_affected_midr_range(const struct arm64_cpu_capabilities *entry)
 {
-	u32 midr = read_cpuid_id();
-
-	if ((midr & CPU_MODEL_MASK) != entry->midr_model)
-		return false;
-
-	midr &= MIDR_REVISION_MASK | MIDR_VARIANT_MASK;
-
-	return (midr >= entry->midr_range_min && midr <= entry->midr_range_max);
+	return MIDR_IS_CPU_MODEL_RANGE(read_cpuid_id(), entry->midr_model,
+				       entry->midr_range_min,
+				       entry->midr_range_max);
 }
 
 #define MIDR_RANGE(model, min, max) \
@@ -75,6 +63,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 			   (1 << MIDR_VARIANT_SHIFT) | 2),
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_834220
+	{
+	/* Cortex-A57 r0p0 - r1p2 */
+		.desc = "ARM erratum 834220",
+		.capability = ARM64_WORKAROUND_834220,
+		MIDR_RANGE(MIDR_CORTEX_A57, 0x00,
+			   (1 << MIDR_VARIANT_SHIFT) | 2),
+	},
+#endif
 #ifdef CONFIG_ARM64_ERRATUM_845719
 	{
 	/* Cortex-A53 r0p[01234] */
@@ -91,6 +88,15 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		MIDR_RANGE(MIDR_THUNDERX, 0x00, 0x01),
 	},
 #endif
+#ifdef CONFIG_CAVIUM_ERRATUM_27456
+	{
+	/* Cavium ThunderX, T88 pass 1.x - 2.1 */
+		.desc = "Cavium erratum 27456",
+		.capability = ARM64_WORKAROUND_CAVIUM_27456,
+		MIDR_RANGE(MIDR_THUNDERX, 0x00,
+			   (1 << MIDR_VARIANT_SHIFT) | 1),
+	},
+#endif
 	{
 	}
 };
diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c
index b6bd7d447768..c7cfb8fe06f9 100644
--- a/arch/arm64/kernel/cpu_ops.c
+++ b/arch/arm64/kernel/cpu_ops.c
@@ -25,19 +25,30 @@
 #include <asm/smp_plat.h>
 
 extern const struct cpu_operations smp_spin_table_ops;
+extern const struct cpu_operations acpi_parking_protocol_ops;
 extern const struct cpu_operations cpu_psci_ops;
 
 const struct cpu_operations *cpu_ops[NR_CPUS];
 
-static const struct cpu_operations *supported_cpu_ops[] __initconst = {
+static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = {
 	&smp_spin_table_ops,
 	&cpu_psci_ops,
 	NULL,
 };
 
+static const struct cpu_operations *acpi_supported_cpu_ops[] __initconst = {
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+	&acpi_parking_protocol_ops,
+#endif
+	&cpu_psci_ops,
+	NULL,
+};
+
 static const struct cpu_operations * __init cpu_get_ops(const char *name)
 {
-	const struct cpu_operations **ops = supported_cpu_ops;
+	const struct cpu_operations **ops;
+
+	ops = acpi_disabled ? dt_supported_cpu_ops : acpi_supported_cpu_ops;
 
 	while (*ops) {
 		if (!strcmp(name, (*ops)->name))
@@ -75,8 +86,16 @@ static const char *__init cpu_read_enable_method(int cpu)
 		}
 	} else {
 		enable_method = acpi_get_enable_method(cpu);
-		if (!enable_method)
-			pr_err("Unsupported ACPI enable-method\n");
+		if (!enable_method) {
+			/*
+			 * In ACPI systems the boot CPU does not require
+			 * checking the enable method since for some
+			 * boot protocol (ie parking protocol) it need not
+			 * be initialized. Don't warn spuriously.
+			 */
+			if (cpu != 0)
+				pr_err("Unsupported ACPI enable-method\n");
+		}
 	}
 
 	return enable_method;
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 52f0d7a5a1c2..943f5140e0f3 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -24,8 +24,10 @@
 #include <asm/cpu.h>
 #include <asm/cpufeature.h>
 #include <asm/cpu_ops.h>
+#include <asm/mmu_context.h>
 #include <asm/processor.h>
 #include <asm/sysreg.h>
+#include <asm/virt.h>
 
 unsigned long elf_hwcap __read_mostly;
 EXPORT_SYMBOL_GPL(elf_hwcap);
@@ -44,8 +46,9 @@ unsigned int compat_elf_hwcap2 __read_mostly;
 
 DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
 
-#define ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+#define __ARM64_FTR_BITS(SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
 	{						\
+		.sign = SIGNED,				\
 		.strict = STRICT,			\
 		.type = TYPE,				\
 		.shift = SHIFT,				\
@@ -53,11 +56,23 @@ DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
 		.safe_val = SAFE_VAL,			\
 	}
 
+/* Define a feature with unsigned values */
+#define ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+	__ARM64_FTR_BITS(FTR_UNSIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
+
+/* Define a feature with a signed value */
+#define S_ARM64_FTR_BITS(STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \
+	__ARM64_FTR_BITS(FTR_SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL)
+
 #define ARM64_FTR_END					\
 	{						\
 		.width = 0,				\
 	}
 
+/* meta feature for alternatives */
+static bool __maybe_unused
+cpufeature_pan_not_uao(const struct arm64_cpu_capabilities *entry);
+
 static struct arm64_ftr_bits ftr_id_aa64isar0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64ISAR0_RDM_SHIFT, 4, 0),
@@ -75,8 +90,8 @@ static struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_GIC_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
-	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_ASIMD_SHIFT, 4, ID_AA64PFR0_ASIMD_NI),
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
 	/* Linux doesn't care about the EL3 */
 	ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, ID_AA64PFR0_EL3_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_EL2_SHIFT, 4, 0),
@@ -87,8 +102,8 @@ static struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 
 static struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0),
-	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI),
-	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI),
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI),
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_BIGENDEL0_SHIFT, 4, 0),
 	/* Linux shouldn't care about secure memory */
@@ -114,6 +129,11 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
 	ARM64_FTR_END,
 };
 
+static struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
+	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR2_UAO_SHIFT, 4, 0),
+	ARM64_FTR_END,
+};
+
 static struct arm64_ftr_bits ftr_ctr[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1),	/* RAO */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 3, 0),
@@ -131,12 +151,12 @@ static struct arm64_ftr_bits ftr_ctr[] = {
 };
 
 static struct arm64_ftr_bits ftr_id_mmfr0[] = {
-	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0),	/* InnerShr */
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0xf),	/* InnerShr */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 24, 4, 0),	/* FCSE */
 	ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, 20, 4, 0),	/* AuxReg */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 16, 4, 0),	/* TCM */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 12, 4, 0),	/* ShareLvl */
-	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 4, 0),	/* OuterShr */
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 4, 0xf),	/* OuterShr */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0),	/* PMSA */
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0),	/* VMSA */
 	ARM64_FTR_END,
@@ -147,7 +167,7 @@ static struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_BRPS_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_PMUVER_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_TRACEVER_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64DFR0_DEBUGVER_SHIFT, 4, 0x6),
 	ARM64_FTR_END,
@@ -195,6 +215,18 @@ static struct arm64_ftr_bits ftr_id_pfr0[] = {
 	ARM64_FTR_END,
 };
 
+static struct arm64_ftr_bits ftr_id_dfr0[] = {
+	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0),
+	S_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf),	/* PerfMon */
+	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
+	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),
+	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 12, 4, 0),
+	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 8, 4, 0),
+	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),
+	ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),
+	ARM64_FTR_END,
+};
+
 /*
  * Common ftr bits for a 32bit register with all hidden, strict
  * attributes, with 4bit feature fields and a default safe value of
@@ -240,7 +272,7 @@ static struct arm64_ftr_reg arm64_ftr_regs[] = {
 	/* Op1 = 0, CRn = 0, CRm = 1 */
 	ARM64_FTR_REG(SYS_ID_PFR0_EL1, ftr_id_pfr0),
 	ARM64_FTR_REG(SYS_ID_PFR1_EL1, ftr_generic_32bits),
-	ARM64_FTR_REG(SYS_ID_DFR0_EL1, ftr_generic_32bits),
+	ARM64_FTR_REG(SYS_ID_DFR0_EL1, ftr_id_dfr0),
 	ARM64_FTR_REG(SYS_ID_MMFR0_EL1, ftr_id_mmfr0),
 	ARM64_FTR_REG(SYS_ID_MMFR1_EL1, ftr_generic_32bits),
 	ARM64_FTR_REG(SYS_ID_MMFR2_EL1, ftr_generic_32bits),
@@ -275,6 +307,7 @@ static struct arm64_ftr_reg arm64_ftr_regs[] = {
 	/* Op1 = 0, CRn = 0, CRm = 7 */
 	ARM64_FTR_REG(SYS_ID_AA64MMFR0_EL1, ftr_id_aa64mmfr0),
 	ARM64_FTR_REG(SYS_ID_AA64MMFR1_EL1, ftr_id_aa64mmfr1),
+	ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2),
 
 	/* Op1 = 3, CRn = 0, CRm = 0 */
 	ARM64_FTR_REG(SYS_CTR_EL0, ftr_ctr),
@@ -399,6 +432,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info)
 	init_cpu_ftr_reg(SYS_ID_AA64ISAR1_EL1, info->reg_id_aa64isar1);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR0_EL1, info->reg_id_aa64mmfr0);
 	init_cpu_ftr_reg(SYS_ID_AA64MMFR1_EL1, info->reg_id_aa64mmfr1);
+	init_cpu_ftr_reg(SYS_ID_AA64MMFR2_EL1, info->reg_id_aa64mmfr2);
 	init_cpu_ftr_reg(SYS_ID_AA64PFR0_EL1, info->reg_id_aa64pfr0);
 	init_cpu_ftr_reg(SYS_ID_AA64PFR1_EL1, info->reg_id_aa64pfr1);
 	init_cpu_ftr_reg(SYS_ID_DFR0_EL1, info->reg_id_dfr0);
@@ -508,6 +542,8 @@ void update_cpu_features(int cpu,
 				      info->reg_id_aa64mmfr0, boot->reg_id_aa64mmfr0);
 	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR1_EL1, cpu,
 				      info->reg_id_aa64mmfr1, boot->reg_id_aa64mmfr1);
+	taint |= check_update_ftr_reg(SYS_ID_AA64MMFR2_EL1, cpu,
+				      info->reg_id_aa64mmfr2, boot->reg_id_aa64mmfr2);
 
 	/*
 	 * EL3 is not our concern.
@@ -583,7 +619,7 @@ u64 read_system_reg(u32 id)
 static bool
 feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry)
 {
-	int val = cpuid_feature_extract_field(reg, entry->field_pos);
+	int val = cpuid_feature_extract_field(reg, entry->field_pos, entry->sign);
 
 	return val >= entry->min_field_value;
 }
@@ -612,6 +648,23 @@ static bool has_useable_gicv3_cpuif(const struct arm64_cpu_capabilities *entry)
 	return has_sre;
 }
 
+static bool has_no_hw_prefetch(const struct arm64_cpu_capabilities *entry)
+{
+	u32 midr = read_cpuid_id();
+	u32 rv_min, rv_max;
+
+	/* Cavium ThunderX pass 1.x and 2.x */
+	rv_min = 0;
+	rv_max = (1 << MIDR_VARIANT_SHIFT) | MIDR_REVISION_MASK;
+
+	return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX, rv_min, rv_max);
+}
+
+static bool runs_at_el2(const struct arm64_cpu_capabilities *entry)
+{
+	return is_kernel_in_hyp_mode();
+}
+
 static const struct arm64_cpu_capabilities arm64_features[] = {
 	{
 		.desc = "GIC system register CPU interface",
@@ -619,6 +672,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_useable_gicv3_cpuif,
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.field_pos = ID_AA64PFR0_GIC_SHIFT,
+		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 	},
 #ifdef CONFIG_ARM64_PAN
@@ -628,6 +682,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64MMFR1_EL1,
 		.field_pos = ID_AA64MMFR1_PAN_SHIFT,
+		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 		.enable = cpu_enable_pan,
 	},
@@ -639,43 +694,74 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64ISAR0_EL1,
 		.field_pos = ID_AA64ISAR0_ATOMICS_SHIFT,
+		.sign = FTR_UNSIGNED,
 		.min_field_value = 2,
 	},
 #endif /* CONFIG_AS_LSE && CONFIG_ARM64_LSE_ATOMICS */
+	{
+		.desc = "Software prefetching using PRFM",
+		.capability = ARM64_HAS_NO_HW_PREFETCH,
+		.matches = has_no_hw_prefetch,
+	},
+#ifdef CONFIG_ARM64_UAO
+	{
+		.desc = "User Access Override",
+		.capability = ARM64_HAS_UAO,
+		.matches = has_cpuid_feature,
+		.sys_reg = SYS_ID_AA64MMFR2_EL1,
+		.field_pos = ID_AA64MMFR2_UAO_SHIFT,
+		.min_field_value = 1,
+		.enable = cpu_enable_uao,
+	},
+#endif /* CONFIG_ARM64_UAO */
+#ifdef CONFIG_ARM64_PAN
+	{
+		.capability = ARM64_ALT_PAN_NOT_UAO,
+		.matches = cpufeature_pan_not_uao,
+	},
+#endif /* CONFIG_ARM64_PAN */
+	{
+		.desc = "Virtualization Host Extensions",
+		.capability = ARM64_HAS_VIRT_HOST_EXTN,
+		.matches = runs_at_el2,
+	},
 	{},
 };
 
-#define HWCAP_CAP(reg, field, min_value, type, cap)		\
+#define HWCAP_CAP(reg, field, s, min_value, type, cap)	\
 	{							\
 		.desc = #cap,					\
 		.matches = has_cpuid_feature,			\
 		.sys_reg = reg,					\
 		.field_pos = field,				\
+		.sign = s,					\
 		.min_field_value = min_value,			\
 		.hwcap_type = type,				\
 		.hwcap = cap,					\
 	}
 
 static const struct arm64_cpu_capabilities arm64_hwcaps[] = {
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 2, CAP_HWCAP, HWCAP_PMULL),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 1, CAP_HWCAP, HWCAP_AES),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA1_SHIFT, 1, CAP_HWCAP, HWCAP_SHA1),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, 1, CAP_HWCAP, HWCAP_SHA2),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_CRC32_SHIFT, 1, CAP_HWCAP, HWCAP_CRC32),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_ATOMICS_SHIFT, 2, CAP_HWCAP, HWCAP_ATOMICS),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, 0, CAP_HWCAP, HWCAP_FP),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 0, CAP_HWCAP, HWCAP_ASIMD),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, HWCAP_PMULL),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_AES),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_SHA1),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_SHA2),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_CRC32_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, HWCAP_CRC32),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_ATOMICS_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, HWCAP_ATOMICS),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, HWCAP_FP),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, HWCAP_FPHP),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, HWCAP_ASIMD),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, HWCAP_ASIMDHP),
 #ifdef CONFIG_COMPAT
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
 #endif
 	{},
 };
 
-static void cap_set_hwcap(const struct arm64_cpu_capabilities *cap)
+static void __init cap_set_hwcap(const struct arm64_cpu_capabilities *cap)
 {
 	switch (cap->hwcap_type) {
 	case CAP_HWCAP:
@@ -696,7 +782,7 @@ static void cap_set_hwcap(const struct arm64_cpu_capabilities *cap)
 }
 
 /* Check if we have a particular HWCAP enabled */
-static bool cpus_have_hwcap(const struct arm64_cpu_capabilities *cap)
+static bool __maybe_unused cpus_have_hwcap(const struct arm64_cpu_capabilities *cap)
 {
 	bool rc;
 
@@ -720,12 +806,12 @@ static bool cpus_have_hwcap(const struct arm64_cpu_capabilities *cap)
 	return rc;
 }
 
-static void setup_cpu_hwcaps(void)
+static void __init setup_cpu_hwcaps(void)
 {
 	int i;
 	const struct arm64_cpu_capabilities *hwcaps = arm64_hwcaps;
 
-	for (i = 0; hwcaps[i].desc; i++)
+	for (i = 0; hwcaps[i].matches; i++)
 		if (hwcaps[i].matches(&hwcaps[i]))
 			cap_set_hwcap(&hwcaps[i]);
 }
@@ -735,11 +821,11 @@ void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
 {
 	int i;
 
-	for (i = 0; caps[i].desc; i++) {
+	for (i = 0; caps[i].matches; i++) {
 		if (!caps[i].matches(&caps[i]))
 			continue;
 
-		if (!cpus_have_cap(caps[i].capability))
+		if (!cpus_have_cap(caps[i].capability) && caps[i].desc)
 			pr_info("%s %s\n", info, caps[i].desc);
 		cpus_set_cap(caps[i].capability);
 	}
@@ -749,17 +835,16 @@ void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps,
  * Run through the enabled capabilities and enable() it on all active
  * CPUs
  */
-static void enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
+static void __init
+enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps)
 {
 	int i;
 
-	for (i = 0; caps[i].desc; i++)
+	for (i = 0; caps[i].matches; i++)
 		if (caps[i].enable && cpus_have_cap(caps[i].capability))
 			on_each_cpu(caps[i].enable, NULL, true);
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-
 /*
  * Flag to indicate if we have computed the system wide
  * capabilities based on the boot time active CPUs. This
@@ -781,35 +866,36 @@ static inline void set_sys_caps_initialised(void)
 static u64 __raw_read_system_reg(u32 sys_id)
 {
 	switch (sys_id) {
-	case SYS_ID_PFR0_EL1:		return (u64)read_cpuid(ID_PFR0_EL1);
-	case SYS_ID_PFR1_EL1:		return (u64)read_cpuid(ID_PFR1_EL1);
-	case SYS_ID_DFR0_EL1:		return (u64)read_cpuid(ID_DFR0_EL1);
-	case SYS_ID_MMFR0_EL1:		return (u64)read_cpuid(ID_MMFR0_EL1);
-	case SYS_ID_MMFR1_EL1:		return (u64)read_cpuid(ID_MMFR1_EL1);
-	case SYS_ID_MMFR2_EL1:		return (u64)read_cpuid(ID_MMFR2_EL1);
-	case SYS_ID_MMFR3_EL1:		return (u64)read_cpuid(ID_MMFR3_EL1);
-	case SYS_ID_ISAR0_EL1:		return (u64)read_cpuid(ID_ISAR0_EL1);
-	case SYS_ID_ISAR1_EL1:		return (u64)read_cpuid(ID_ISAR1_EL1);
-	case SYS_ID_ISAR2_EL1:		return (u64)read_cpuid(ID_ISAR2_EL1);
-	case SYS_ID_ISAR3_EL1:		return (u64)read_cpuid(ID_ISAR3_EL1);
-	case SYS_ID_ISAR4_EL1:		return (u64)read_cpuid(ID_ISAR4_EL1);
-	case SYS_ID_ISAR5_EL1:		return (u64)read_cpuid(ID_ISAR4_EL1);
-	case SYS_MVFR0_EL1:		return (u64)read_cpuid(MVFR0_EL1);
-	case SYS_MVFR1_EL1:		return (u64)read_cpuid(MVFR1_EL1);
-	case SYS_MVFR2_EL1:		return (u64)read_cpuid(MVFR2_EL1);
-
-	case SYS_ID_AA64PFR0_EL1:	return (u64)read_cpuid(ID_AA64PFR0_EL1);
-	case SYS_ID_AA64PFR1_EL1:	return (u64)read_cpuid(ID_AA64PFR0_EL1);
-	case SYS_ID_AA64DFR0_EL1:	return (u64)read_cpuid(ID_AA64DFR0_EL1);
-	case SYS_ID_AA64DFR1_EL1:	return (u64)read_cpuid(ID_AA64DFR0_EL1);
-	case SYS_ID_AA64MMFR0_EL1:	return (u64)read_cpuid(ID_AA64MMFR0_EL1);
-	case SYS_ID_AA64MMFR1_EL1:	return (u64)read_cpuid(ID_AA64MMFR1_EL1);
-	case SYS_ID_AA64ISAR0_EL1:	return (u64)read_cpuid(ID_AA64ISAR0_EL1);
-	case SYS_ID_AA64ISAR1_EL1:	return (u64)read_cpuid(ID_AA64ISAR1_EL1);
-
-	case SYS_CNTFRQ_EL0:		return (u64)read_cpuid(CNTFRQ_EL0);
-	case SYS_CTR_EL0:		return (u64)read_cpuid(CTR_EL0);
-	case SYS_DCZID_EL0:		return (u64)read_cpuid(DCZID_EL0);
+	case SYS_ID_PFR0_EL1:		return read_cpuid(ID_PFR0_EL1);
+	case SYS_ID_PFR1_EL1:		return read_cpuid(ID_PFR1_EL1);
+	case SYS_ID_DFR0_EL1:		return read_cpuid(ID_DFR0_EL1);
+	case SYS_ID_MMFR0_EL1:		return read_cpuid(ID_MMFR0_EL1);
+	case SYS_ID_MMFR1_EL1:		return read_cpuid(ID_MMFR1_EL1);
+	case SYS_ID_MMFR2_EL1:		return read_cpuid(ID_MMFR2_EL1);
+	case SYS_ID_MMFR3_EL1:		return read_cpuid(ID_MMFR3_EL1);
+	case SYS_ID_ISAR0_EL1:		return read_cpuid(ID_ISAR0_EL1);
+	case SYS_ID_ISAR1_EL1:		return read_cpuid(ID_ISAR1_EL1);
+	case SYS_ID_ISAR2_EL1:		return read_cpuid(ID_ISAR2_EL1);
+	case SYS_ID_ISAR3_EL1:		return read_cpuid(ID_ISAR3_EL1);
+	case SYS_ID_ISAR4_EL1:		return read_cpuid(ID_ISAR4_EL1);
+	case SYS_ID_ISAR5_EL1:		return read_cpuid(ID_ISAR4_EL1);
+	case SYS_MVFR0_EL1:		return read_cpuid(MVFR0_EL1);
+	case SYS_MVFR1_EL1:		return read_cpuid(MVFR1_EL1);
+	case SYS_MVFR2_EL1:		return read_cpuid(MVFR2_EL1);
+
+	case SYS_ID_AA64PFR0_EL1:	return read_cpuid(ID_AA64PFR0_EL1);
+	case SYS_ID_AA64PFR1_EL1:	return read_cpuid(ID_AA64PFR0_EL1);
+	case SYS_ID_AA64DFR0_EL1:	return read_cpuid(ID_AA64DFR0_EL1);
+	case SYS_ID_AA64DFR1_EL1:	return read_cpuid(ID_AA64DFR0_EL1);
+	case SYS_ID_AA64MMFR0_EL1:	return read_cpuid(ID_AA64MMFR0_EL1);
+	case SYS_ID_AA64MMFR1_EL1:	return read_cpuid(ID_AA64MMFR1_EL1);
+	case SYS_ID_AA64MMFR2_EL1:	return read_cpuid(ID_AA64MMFR2_EL1);
+	case SYS_ID_AA64ISAR0_EL1:	return read_cpuid(ID_AA64ISAR0_EL1);
+	case SYS_ID_AA64ISAR1_EL1:	return read_cpuid(ID_AA64ISAR1_EL1);
+
+	case SYS_CNTFRQ_EL0:		return read_cpuid(CNTFRQ_EL0);
+	case SYS_CTR_EL0:		return read_cpuid(CTR_EL0);
+	case SYS_DCZID_EL0:		return read_cpuid(DCZID_EL0);
 	default:
 		BUG();
 		return 0;
@@ -817,25 +903,12 @@ static u64 __raw_read_system_reg(u32 sys_id)
 }
 
 /*
- * Park the CPU which doesn't have the capability as advertised
- * by the system.
+ * Check for CPU features that are used in early boot
+ * based on the Boot CPU value.
  */
-static void fail_incapable_cpu(char *cap_type,
-				 const struct arm64_cpu_capabilities *cap)
+static void check_early_cpu_features(void)
 {
-	int cpu = smp_processor_id();
-
-	pr_crit("CPU%d: missing %s : %s\n", cpu, cap_type, cap->desc);
-	/* Mark this CPU absent */
-	set_cpu_present(cpu, 0);
-
-	/* Check if we can park ourselves */
-	if (cpu_ops[cpu] && cpu_ops[cpu]->cpu_die)
-		cpu_ops[cpu]->cpu_die(cpu);
-	asm(
-	"1:	wfe\n"
-	"	wfi\n"
-	"	b	1b");
+	verify_cpu_asid_bits();
 }
 
 /*
@@ -851,6 +924,8 @@ void verify_local_cpu_capabilities(void)
 	int i;
 	const struct arm64_cpu_capabilities *caps;
 
+	check_early_cpu_features();
+
 	/*
 	 * If we haven't computed the system capabilities, there is nothing
 	 * to verify.
@@ -859,36 +934,34 @@ void verify_local_cpu_capabilities(void)
 		return;
 
 	caps = arm64_features;
-	for (i = 0; caps[i].desc; i++) {
+	for (i = 0; caps[i].matches; i++) {
 		if (!cpus_have_cap(caps[i].capability) || !caps[i].sys_reg)
 			continue;
 		/*
 		 * If the new CPU misses an advertised feature, we cannot proceed
 		 * further, park the cpu.
 		 */
-		if (!feature_matches(__raw_read_system_reg(caps[i].sys_reg), &caps[i]))
-			fail_incapable_cpu("arm64_features", &caps[i]);
+		if (!feature_matches(__raw_read_system_reg(caps[i].sys_reg), &caps[i])) {
+			pr_crit("CPU%d: missing feature: %s\n",
+					smp_processor_id(), caps[i].desc);
+			cpu_die_early();
+		}
 		if (caps[i].enable)
 			caps[i].enable(NULL);
 	}
 
-	for (i = 0, caps = arm64_hwcaps; caps[i].desc; i++) {
+	for (i = 0, caps = arm64_hwcaps; caps[i].matches; i++) {
 		if (!cpus_have_hwcap(&caps[i]))
 			continue;
-		if (!feature_matches(__raw_read_system_reg(caps[i].sys_reg), &caps[i]))
-			fail_incapable_cpu("arm64_hwcaps", &caps[i]);
+		if (!feature_matches(__raw_read_system_reg(caps[i].sys_reg), &caps[i])) {
+			pr_crit("CPU%d: missing HWCAP: %s\n",
+					smp_processor_id(), caps[i].desc);
+			cpu_die_early();
+		}
 	}
 }
 
-#else	/* !CONFIG_HOTPLUG_CPU */
-
-static inline void set_sys_caps_initialised(void)
-{
-}
-
-#endif	/* CONFIG_HOTPLUG_CPU */
-
-static void setup_feature_capabilities(void)
+static void __init setup_feature_capabilities(void)
 {
 	update_cpu_capabilities(arm64_features, "detected feature:");
 	enable_cpu_capabilities(arm64_features);
@@ -918,3 +991,9 @@ void __init setup_cpu_features(void)
 		pr_warn("L1_CACHE_BYTES smaller than the Cache Writeback Granule (%d < %d)\n",
 			L1_CACHE_BYTES, cls);
 }
+
+static bool __maybe_unused
+cpufeature_pan_not_uao(const struct arm64_cpu_capabilities *entry)
+{
+	return (cpus_have_cap(ARM64_HAS_PAN) && !cpus_have_cap(ARM64_HAS_UAO));
+}
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 706679d0a0b4..84c8684431c7 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -30,6 +30,7 @@
 #include <linux/seq_file.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/delay.h>
 
 /*
  * In case the boot CPU is hotpluggable, we record its initial state and
@@ -58,6 +59,8 @@ static const char *const hwcap_str[] = {
 	"sha2",
 	"crc32",
 	"atomics",
+	"fphp",
+	"asimdhp",
 	NULL
 };
 
@@ -112,6 +115,10 @@ static int c_show(struct seq_file *m, void *v)
 		 */
 		seq_printf(m, "processor\t: %d\n", i);
 
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   loops_per_jiffy / (500000UL/HZ),
+			   loops_per_jiffy / (5000UL/HZ) % 100);
+
 		/*
 		 * Dump out the common processor features in a single line.
 		 * Userspace should read the hwcaps with getauxval(AT_HWCAP)
@@ -205,6 +212,7 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
 	info->reg_id_aa64isar1 = read_cpuid(ID_AA64ISAR1_EL1);
 	info->reg_id_aa64mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
 	info->reg_id_aa64mmfr1 = read_cpuid(ID_AA64MMFR1_EL1);
+	info->reg_id_aa64mmfr2 = read_cpuid(ID_AA64MMFR2_EL1);
 	info->reg_id_aa64pfr0 = read_cpuid(ID_AA64PFR0_EL1);
 	info->reg_id_aa64pfr1 = read_cpuid(ID_AA64PFR1_EL1);
 
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 8aee3aeec3e6..c45f2968bc8c 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -34,7 +34,7 @@
 /* Determine debug architecture. */
 u8 debug_monitors_arch(void)
 {
-	return cpuid_feature_extract_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
+	return cpuid_feature_extract_unsigned_field(read_system_reg(SYS_ID_AA64DFR0_EL1),
 						ID_AA64DFR0_DEBUGVER_SHIFT);
 }
 
@@ -186,20 +186,21 @@ static void clear_regs_spsr_ss(struct pt_regs *regs)
 
 /* EL1 Single Step Handler hooks */
 static LIST_HEAD(step_hook);
-static DEFINE_RWLOCK(step_hook_lock);
+static DEFINE_SPINLOCK(step_hook_lock);
 
 void register_step_hook(struct step_hook *hook)
 {
-	write_lock(&step_hook_lock);
-	list_add(&hook->node, &step_hook);
-	write_unlock(&step_hook_lock);
+	spin_lock(&step_hook_lock);
+	list_add_rcu(&hook->node, &step_hook);
+	spin_unlock(&step_hook_lock);
 }
 
 void unregister_step_hook(struct step_hook *hook)
 {
-	write_lock(&step_hook_lock);
-	list_del(&hook->node);
-	write_unlock(&step_hook_lock);
+	spin_lock(&step_hook_lock);
+	list_del_rcu(&hook->node);
+	spin_unlock(&step_hook_lock);
+	synchronize_rcu();
 }
 
 /*
@@ -213,24 +214,41 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr)
 	struct step_hook *hook;
 	int retval = DBG_HOOK_ERROR;
 
-	read_lock(&step_hook_lock);
+	rcu_read_lock();
 
-	list_for_each_entry(hook, &step_hook, node)	{
+	list_for_each_entry_rcu(hook, &step_hook, node)	{
 		retval = hook->fn(regs, esr);
 		if (retval == DBG_HOOK_HANDLED)
 			break;
 	}
 
-	read_unlock(&step_hook_lock);
+	rcu_read_unlock();
 
 	return retval;
 }
 
+static void send_user_sigtrap(int si_code)
+{
+	struct pt_regs *regs = current_pt_regs();
+	siginfo_t info = {
+		.si_signo	= SIGTRAP,
+		.si_errno	= 0,
+		.si_code	= si_code,
+		.si_addr	= (void __user *)instruction_pointer(regs),
+	};
+
+	if (WARN_ON(!user_mode(regs)))
+		return;
+
+	if (interrupts_enabled(regs))
+		local_irq_enable();
+
+	force_sig_info(SIGTRAP, &info, current);
+}
+
 static int single_step_handler(unsigned long addr, unsigned int esr,
 			       struct pt_regs *regs)
 {
-	siginfo_t info;
-
 	/*
 	 * If we are stepping a pending breakpoint, call the hw_breakpoint
 	 * handler first.
@@ -239,11 +257,7 @@ static int single_step_handler(unsigned long addr, unsigned int esr,
 		return 0;
 
 	if (user_mode(regs)) {
-		info.si_signo = SIGTRAP;
-		info.si_errno = 0;
-		info.si_code  = TRAP_HWBKPT;
-		info.si_addr  = (void __user *)instruction_pointer(regs);
-		force_sig_info(SIGTRAP, &info, current);
+		send_user_sigtrap(TRAP_HWBKPT);
 
 		/*
 		 * ptrace will disable single step unless explicitly
@@ -307,17 +321,8 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr)
 static int brk_handler(unsigned long addr, unsigned int esr,
 		       struct pt_regs *regs)
 {
-	siginfo_t info;
-
 	if (user_mode(regs)) {
-		info = (siginfo_t) {
-			.si_signo = SIGTRAP,
-			.si_errno = 0,
-			.si_code  = TRAP_BRKPT,
-			.si_addr  = (void __user *)instruction_pointer(regs),
-		};
-
-		force_sig_info(SIGTRAP, &info, current);
+		send_user_sigtrap(TRAP_BRKPT);
 	} else if (call_break_hook(regs, esr) != DBG_HOOK_HANDLED) {
 		pr_warning("Unexpected kernel BRK exception at EL1\n");
 		return -EFAULT;
@@ -328,7 +333,6 @@ static int brk_handler(unsigned long addr, unsigned int esr,
 
 int aarch32_break_handler(struct pt_regs *regs)
 {
-	siginfo_t info;
 	u32 arm_instr;
 	u16 thumb_instr;
 	bool bp = false;
@@ -359,14 +363,7 @@ int aarch32_break_handler(struct pt_regs *regs)
 	if (!bp)
 		return -EFAULT;
 
-	info = (siginfo_t) {
-		.si_signo = SIGTRAP,
-		.si_errno = 0,
-		.si_code  = TRAP_BRKPT,
-		.si_addr  = pc,
-	};
-
-	force_sig_info(SIGTRAP, &info, current);
+	send_user_sigtrap(TRAP_BRKPT);
 	return 0;
 }
 
diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S
index a773db92908b..cae3112f7791 100644
--- a/arch/arm64/kernel/efi-entry.S
+++ b/arch/arm64/kernel/efi-entry.S
@@ -35,6 +35,7 @@ ENTRY(entry)
 	 * for image_addr variable passed to efi_entry().
 	 */
 	stp	x29, x30, [sp, #-32]!
+	mov	x29, sp
 
 	/*
 	 * Call efi_entry to do the real work.
@@ -61,7 +62,7 @@ ENTRY(entry)
 	 */
 	mov	x20, x0		// DTB address
 	ldr	x0, [sp, #16]	// relocated _text address
-	ldr	x21, =stext_offset
+	movz	x21, #:abs_g0:stext_offset
 	add	x21, x0, x21
 
 	/*
diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c
index de46b50f4cdf..b6abc852f2a1 100644
--- a/arch/arm64/kernel/efi.c
+++ b/arch/arm64/kernel/efi.c
@@ -11,307 +11,34 @@
  *
  */
 
-#include <linux/atomic.h>
 #include <linux/dmi.h>
 #include <linux/efi.h>
-#include <linux/export.h>
-#include <linux/memblock.h>
-#include <linux/mm_types.h>
-#include <linux/bootmem.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/preempt.h>
-#include <linux/rbtree.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
+#include <linux/init.h>
 
-#include <asm/cacheflush.h>
 #include <asm/efi.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
 
-struct efi_memory_map memmap;
-
-static u64 efi_system_table;
-
-static pgd_t efi_pgd[PTRS_PER_PGD] __page_aligned_bss;
-
-static struct mm_struct efi_mm = {
-	.mm_rb			= RB_ROOT,
-	.pgd			= efi_pgd,
-	.mm_users		= ATOMIC_INIT(2),
-	.mm_count		= ATOMIC_INIT(1),
-	.mmap_sem		= __RWSEM_INITIALIZER(efi_mm.mmap_sem),
-	.page_table_lock	= __SPIN_LOCK_UNLOCKED(efi_mm.page_table_lock),
-	.mmlist			= LIST_HEAD_INIT(efi_mm.mmlist),
-};
-
-static int __init is_normal_ram(efi_memory_desc_t *md)
-{
-	if (md->attribute & EFI_MEMORY_WB)
-		return 1;
-	return 0;
-}
-
-/*
- * Translate a EFI virtual address into a physical address: this is necessary,
- * as some data members of the EFI system table are virtually remapped after
- * SetVirtualAddressMap() has been called.
- */
-static phys_addr_t efi_to_phys(unsigned long addr)
+int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
 {
-	efi_memory_desc_t *md;
-
-	for_each_efi_memory_desc(&memmap, md) {
-		if (!(md->attribute & EFI_MEMORY_RUNTIME))
-			continue;
-		if (md->virt_addr == 0)
-			/* no virtual mapping has been installed by the stub */
-			break;
-		if (md->virt_addr <= addr &&
-		    (addr - md->virt_addr) < (md->num_pages << EFI_PAGE_SHIFT))
-			return md->phys_addr + addr - md->virt_addr;
-	}
-	return addr;
-}
-
-static int __init uefi_init(void)
-{
-	efi_char16_t *c16;
-	void *config_tables;
-	u64 table_size;
-	char vendor[100] = "unknown";
-	int i, retval;
-
-	efi.systab = early_memremap(efi_system_table,
-				    sizeof(efi_system_table_t));
-	if (efi.systab == NULL) {
-		pr_warn("Unable to map EFI system table.\n");
-		return -ENOMEM;
-	}
-
-	set_bit(EFI_BOOT, &efi.flags);
-	set_bit(EFI_64BIT, &efi.flags);
+	pteval_t prot_val;
 
 	/*
-	 * Verify the EFI Table
+	 * Only regions of type EFI_RUNTIME_SERVICES_CODE need to be
+	 * executable, everything else can be mapped with the XN bits
+	 * set.
 	 */
-	if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) {
-		pr_err("System table signature incorrect\n");
-		retval = -EINVAL;
-		goto out;
-	}
-	if ((efi.systab->hdr.revision >> 16) < 2)
-		pr_warn("Warning: EFI system table version %d.%02d, expected 2.00 or greater\n",
-			efi.systab->hdr.revision >> 16,
-			efi.systab->hdr.revision & 0xffff);
-
-	/* Show what we know for posterity */
-	c16 = early_memremap(efi_to_phys(efi.systab->fw_vendor),
-			     sizeof(vendor) * sizeof(efi_char16_t));
-	if (c16) {
-		for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i)
-			vendor[i] = c16[i];
-		vendor[i] = '\0';
-		early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t));
-	}
-
-	pr_info("EFI v%u.%.02u by %s\n",
-		efi.systab->hdr.revision >> 16,
-		efi.systab->hdr.revision & 0xffff, vendor);
-
-	table_size = sizeof(efi_config_table_64_t) * efi.systab->nr_tables;
-	config_tables = early_memremap(efi_to_phys(efi.systab->tables),
-				       table_size);
-
-	retval = efi_config_parse_tables(config_tables, efi.systab->nr_tables,
-					 sizeof(efi_config_table_64_t), NULL);
-
-	early_memunmap(config_tables, table_size);
-out:
-	early_memunmap(efi.systab,  sizeof(efi_system_table_t));
-	return retval;
-}
-
-/*
- * Return true for RAM regions we want to permanently reserve.
- */
-static __init int is_reserve_region(efi_memory_desc_t *md)
-{
-	switch (md->type) {
-	case EFI_LOADER_CODE:
-	case EFI_LOADER_DATA:
-	case EFI_BOOT_SERVICES_CODE:
-	case EFI_BOOT_SERVICES_DATA:
-	case EFI_CONVENTIONAL_MEMORY:
-	case EFI_PERSISTENT_MEMORY:
-		return 0;
-	default:
-		break;
-	}
-	return is_normal_ram(md);
-}
-
-static __init void reserve_regions(void)
-{
-	efi_memory_desc_t *md;
-	u64 paddr, npages, size;
-
-	if (efi_enabled(EFI_DBG))
-		pr_info("Processing EFI memory map:\n");
-
-	for_each_efi_memory_desc(&memmap, md) {
-		paddr = md->phys_addr;
-		npages = md->num_pages;
-
-		if (efi_enabled(EFI_DBG)) {
-			char buf[64];
-
-			pr_info("  0x%012llx-0x%012llx %s",
-				paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1,
-				efi_md_typeattr_format(buf, sizeof(buf), md));
-		}
-
-		memrange_efi_to_native(&paddr, &npages);
-		size = npages << PAGE_SHIFT;
-
-		if (is_normal_ram(md))
-			early_init_dt_add_memory_arch(paddr, size);
-
-		if (is_reserve_region(md)) {
-			memblock_reserve(paddr, size);
-			if (efi_enabled(EFI_DBG))
-				pr_cont("*");
-		}
-
-		if (efi_enabled(EFI_DBG))
-			pr_cont("\n");
-	}
-
-	set_bit(EFI_MEMMAP, &efi.flags);
-}
-
-void __init efi_init(void)
-{
-	struct efi_fdt_params params;
-
-	/* Grab UEFI information placed in FDT by stub */
-	if (!efi_get_fdt_params(&params))
-		return;
-
-	efi_system_table = params.system_table;
-
-	memblock_reserve(params.mmap & PAGE_MASK,
-			 PAGE_ALIGN(params.mmap_size + (params.mmap & ~PAGE_MASK)));
-	memmap.phys_map = params.mmap;
-	memmap.map = early_memremap(params.mmap, params.mmap_size);
-	memmap.map_end = memmap.map + params.mmap_size;
-	memmap.desc_size = params.desc_size;
-	memmap.desc_version = params.desc_ver;
-
-	if (uefi_init() < 0)
-		return;
-
-	reserve_regions();
-	early_memunmap(memmap.map, params.mmap_size);
-}
-
-static bool __init efi_virtmap_init(void)
-{
-	efi_memory_desc_t *md;
-
-	for_each_efi_memory_desc(&memmap, md) {
-		u64 paddr, npages, size;
-		pgprot_t prot;
-
-		if (!(md->attribute & EFI_MEMORY_RUNTIME))
-			continue;
-		if (md->virt_addr == 0)
-			return false;
-
-		paddr = md->phys_addr;
-		npages = md->num_pages;
-		memrange_efi_to_native(&paddr, &npages);
-		size = npages << PAGE_SHIFT;
-
-		pr_info("  EFI remap 0x%016llx => %p\n",
-			md->phys_addr, (void *)md->virt_addr);
-
-		/*
-		 * Only regions of type EFI_RUNTIME_SERVICES_CODE need to be
-		 * executable, everything else can be mapped with the XN bits
-		 * set.
-		 */
-		if (!is_normal_ram(md))
-			prot = __pgprot(PROT_DEVICE_nGnRE);
-		else if (md->type == EFI_RUNTIME_SERVICES_CODE ||
-			 !PAGE_ALIGNED(md->phys_addr))
-			prot = PAGE_KERNEL_EXEC;
-		else
-			prot = PAGE_KERNEL;
-
-		create_pgd_mapping(&efi_mm, paddr, md->virt_addr, size, prot);
-	}
-	return true;
-}
-
-/*
- * Enable the UEFI Runtime Services if all prerequisites are in place, i.e.,
- * non-early mapping of the UEFI system table and virtual mappings for all
- * EFI_MEMORY_RUNTIME regions.
- */
-static int __init arm64_enable_runtime_services(void)
-{
-	u64 mapsize;
-
-	if (!efi_enabled(EFI_BOOT)) {
-		pr_info("EFI services will not be available.\n");
-		return -1;
-	}
-
-	if (efi_runtime_disabled()) {
-		pr_info("EFI runtime services will be disabled.\n");
-		return -1;
-	}
-
-	pr_info("Remapping and enabling EFI services.\n");
-
-	mapsize = memmap.map_end - memmap.map;
-	memmap.map = (__force void *)ioremap_cache(memmap.phys_map,
-						   mapsize);
-	if (!memmap.map) {
-		pr_err("Failed to remap EFI memory map\n");
-		return -1;
-	}
-	memmap.map_end = memmap.map + mapsize;
-	efi.memmap = &memmap;
-
-	efi.systab = (__force void *)ioremap_cache(efi_system_table,
-						   sizeof(efi_system_table_t));
-	if (!efi.systab) {
-		pr_err("Failed to remap EFI System Table\n");
-		return -1;
-	}
-	set_bit(EFI_SYSTEM_TABLES, &efi.flags);
-
-	if (!efi_virtmap_init()) {
-		pr_err("No UEFI virtual mapping was installed -- runtime services will not be available\n");
-		return -1;
-	}
-
-	/* Set up runtime services function pointers */
-	efi_native_runtime_setup();
-	set_bit(EFI_RUNTIME_SERVICES, &efi.flags);
-
-	efi.runtime_version = efi.systab->hdr.revision;
+	if ((md->attribute & EFI_MEMORY_WB) == 0)
+		prot_val = PROT_DEVICE_nGnRE;
+	else if (md->type == EFI_RUNTIME_SERVICES_CODE ||
+		 !PAGE_ALIGNED(md->phys_addr))
+		prot_val = pgprot_val(PAGE_KERNEL_EXEC);
+	else
+		prot_val = pgprot_val(PAGE_KERNEL);
 
+	create_pgd_mapping(mm, md->phys_addr, md->virt_addr,
+			   md->num_pages << EFI_PAGE_SHIFT,
+			   __pgprot(prot_val | PTE_NG));
 	return 0;
 }
-early_initcall(arm64_enable_runtime_services);
 
 static int __init arm64_dmi_init(void)
 {
@@ -327,30 +54,6 @@ static int __init arm64_dmi_init(void)
 }
 core_initcall(arm64_dmi_init);
 
-static void efi_set_pgd(struct mm_struct *mm)
-{
-	if (mm == &init_mm)
-		cpu_set_reserved_ttbr0();
-	else
-		cpu_switch_mm(mm->pgd, mm);
-
-	local_flush_tlb_all();
-	if (icache_is_aivivt())
-		__local_flush_icache_all();
-}
-
-void efi_virtmap_load(void)
-{
-	preempt_disable();
-	efi_set_pgd(&efi_mm);
-}
-
-void efi_virtmap_unload(void)
-{
-	efi_set_pgd(current->active_mm);
-	preempt_enable();
-}
-
 /*
  * UpdateCapsule() depends on the system being shutdown via
  * ResetSystem().
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 7ed3d75f6304..12e8d2bcb3f9 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -27,6 +27,7 @@
 #include <asm/cpufeature.h>
 #include <asm/errno.h>
 #include <asm/esr.h>
+#include <asm/irq.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
 
@@ -88,9 +89,12 @@
 
 	.if	\el == 0
 	mrs	x21, sp_el0
-	get_thread_info tsk			// Ensure MDSCR_EL1.SS is clear,
+	mov	tsk, sp
+	and	tsk, tsk, #~(THREAD_SIZE - 1)	// Ensure MDSCR_EL1.SS is clear,
 	ldr	x19, [tsk, #TI_FLAGS]		// since we can unmask debug
 	disable_step_tsk x19, x20		// exceptions when scheduling.
+
+	mov	x29, xzr			// fp pointed to user-space
 	.else
 	add	x21, sp, #S_FRAME_SIZE
 	.endif
@@ -108,6 +112,13 @@
 	.endif
 
 	/*
+	 * Set sp_el0 to current thread_info.
+	 */
+	.if	\el == 0
+	msr	sp_el0, tsk
+	.endif
+
+	/*
 	 * Registers that may be useful after this macro is invoked:
 	 *
 	 * x21 - aborted SP
@@ -164,8 +175,44 @@ alternative_endif
 	.endm
 
 	.macro	get_thread_info, rd
-	mov	\rd, sp
-	and	\rd, \rd, #~(THREAD_SIZE - 1)	// top of stack
+	mrs	\rd, sp_el0
+	.endm
+
+	.macro	irq_stack_entry
+	mov	x19, sp			// preserve the original sp
+
+	/*
+	 * Compare sp with the current thread_info, if the top
+	 * ~(THREAD_SIZE - 1) bits match, we are on a task stack, and
+	 * should switch to the irq stack.
+	 */
+	and	x25, x19, #~(THREAD_SIZE - 1)
+	cmp	x25, tsk
+	b.ne	9998f
+
+	this_cpu_ptr irq_stack, x25, x26
+	mov	x26, #IRQ_STACK_START_SP
+	add	x26, x25, x26
+
+	/* switch to the irq stack */
+	mov	sp, x26
+
+	/*
+	 * Add a dummy stack frame, this non-standard format is fixed up
+	 * by unwind_frame()
+	 */
+	stp     x29, x19, [sp, #-16]!
+	mov	x29, sp
+
+9998:
+	.endm
+
+	/*
+	 * x19 should be preserved between irq_stack_entry and
+	 * irq_stack_exit.
+	 */
+	.macro	irq_stack_exit
+	mov	sp, x19
 	.endm
 
 /*
@@ -183,10 +230,11 @@ tsk	.req	x28		// current thread_info
  * Interrupt handling.
  */
 	.macro	irq_handler
-	adrp	x1, handle_arch_irq
-	ldr	x1, [x1, #:lo12:handle_arch_irq]
+	ldr_l	x1, handle_arch_irq
 	mov	x0, sp
+	irq_stack_entry
 	blr	x1
+	irq_stack_exit
 	.endm
 
 	.text
@@ -229,7 +277,7 @@ END(vectors)
  * Invalid mode handlers
  */
 	.macro	inv_entry, el, reason, regsize = 64
-	kernel_entry el, \regsize
+	kernel_entry \el, \regsize
 	mov	x0, sp
 	mov	x1, #\reason
 	mrs	x2, esr_el1
@@ -358,10 +406,10 @@ el1_irq:
 	bl	trace_hardirqs_off
 #endif
 
+	get_thread_info tsk
 	irq_handler
 
 #ifdef CONFIG_PREEMPT
-	get_thread_info tsk
 	ldr	w24, [tsk, #TI_PREEMPT]		// get preempt count
 	cbnz	w24, 1f				// preempt count != 0
 	ldr	x0, [tsk, #TI_FLAGS]		// get flags
@@ -599,6 +647,8 @@ ENTRY(cpu_switch_to)
 	ldp	x29, x9, [x8], #16
 	ldr	lr, [x8]
 	mov	sp, x9
+	and	x9, x9, #~(THREAD_SIZE - 1)
+	msr	sp_el0, x9
 	ret
 ENDPROC(cpu_switch_to)
 
@@ -626,14 +676,14 @@ ret_fast_syscall_trace:
 work_pending:
 	tbnz	x1, #TIF_NEED_RESCHED, work_resched
 	/* TIF_SIGPENDING, TIF_NOTIFY_RESUME or TIF_FOREIGN_FPSTATE case */
-	ldr	x2, [sp, #S_PSTATE]
 	mov	x0, sp				// 'regs'
-	tst	x2, #PSR_MODE_MASK		// user mode regs?
-	b.ne	no_work_pending			// returning to kernel
 	enable_irq				// enable interrupts for do_notify_resume()
 	bl	do_notify_resume
 	b	ret_to_user
 work_resched:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off		// the IRQs are off here, inform the tracing code
+#endif
 	bl	schedule
 
 /*
@@ -645,7 +695,6 @@ ret_to_user:
 	and	x2, x1, #_TIF_WORK_MASK
 	cbnz	x2, work_pending
 	enable_step_tsk x1, x2
-no_work_pending:
 	kernel_exit 0
 ENDPROC(ret_to_user)
 
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 4c46c54a3ad7..975b274ee7b5 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -45,7 +45,7 @@
  *     been used to perform kernel mode NEON in the meantime.
  *
  * For (a), we add a 'cpu' field to struct fpsimd_state, which gets updated to
- * the id of the current CPU everytime the state is loaded onto a CPU. For (b),
+ * the id of the current CPU every time the state is loaded onto a CPU. For (b),
  * we add the per-cpu variable 'fpsimd_last_state' (below), which contains the
  * address of the userland FPSIMD state of the task that was loaded onto the CPU
  * the most recently, or NULL if kernel mode NEON has been performed after that.
@@ -289,7 +289,7 @@ static struct notifier_block fpsimd_cpu_pm_notifier_block = {
 	.notifier_call = fpsimd_cpu_pm_notifier,
 };
 
-static void fpsimd_pm_init(void)
+static void __init fpsimd_pm_init(void)
 {
 	cpu_pm_register_notifier(&fpsimd_cpu_pm_notifier_block);
 }
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index c851be795080..ebecf9aa33d1 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -29,12 +29,11 @@ static int ftrace_modify_code(unsigned long pc, u32 old, u32 new,
 
 	/*
 	 * Note:
-	 * Due to modules and __init, code can disappear and change,
-	 * we need to protect against faulting as well as code changing.
-	 * We do this by aarch64_insn_*() which use the probe_kernel_*().
-	 *
-	 * No lock is held here because all the modifications are run
-	 * through stop_machine().
+	 * We are paranoid about modifying text, as if a bug were to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with aarch64_insn_*() which uses
+	 * probe_kernel_*(), and make sure what we read is what we expected it
+	 * to be before modifying it.
 	 */
 	if (validate) {
 		if (aarch64_insn_read((void *)pc, &replaced))
@@ -93,6 +92,11 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 	return ftrace_modify_code(pc, old, new, true);
 }
 
+void arch_ftrace_update_code(int command)
+{
+	ftrace_modify_all_code(command);
+}
+
 int __init ftrace_dyn_arch_init(void)
 {
 	return 0;
@@ -125,23 +129,20 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 * on other archs. It's unlikely on AArch64.
 	 */
 	old = *parent;
-	*parent = return_hooker;
 
 	trace.func = self_addr;
 	trace.depth = current->curr_ret_stack + 1;
 
 	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		*parent = old;
+	if (!ftrace_graph_entry(&trace))
 		return;
-	}
 
 	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
 				       frame_pointer);
-	if (err == -EBUSY) {
-		*parent = old;
+	if (err == -EBUSY)
 		return;
-	}
+	else
+		*parent = return_hooker;
 }
 
 #ifdef CONFIG_DYNAMIC_FTRACE
diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
index 23cfc08fc8ba..4203d5f257bc 100644
--- a/arch/arm64/kernel/head.S
+++ b/arch/arm64/kernel/head.S
@@ -29,11 +29,14 @@
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
 #include <asm/cputype.h>
+#include <asm/elf.h>
 #include <asm/kernel-pgtable.h>
+#include <asm/kvm_arm.h>
 #include <asm/memory.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/smp.h>
 #include <asm/sysreg.h>
 #include <asm/thread_info.h>
 #include <asm/virt.h>
@@ -67,12 +70,11 @@
  * in the entry routines.
  */
 	__HEAD
-
+_head:
 	/*
 	 * DO NOT MODIFY. Image header expected by Linux boot-loaders.
 	 */
 #ifdef CONFIG_EFI
-efi_head:
 	/*
 	 * This add instruction has no meaningful effect except that
 	 * its opcode forms the magic "MZ" signature required by UEFI.
@@ -83,9 +85,9 @@ efi_head:
 	b	stext				// branch to kernel start, magic
 	.long	0				// reserved
 #endif
-	.quad	_kernel_offset_le		// Image load offset from start of RAM, little-endian
-	.quad	_kernel_size_le			// Effective size of kernel image, little-endian
-	.quad	_kernel_flags_le		// Informative flags, little-endian
+	le64sym	_kernel_offset_le		// Image load offset from start of RAM, little-endian
+	le64sym	_kernel_size_le			// Effective size of kernel image, little-endian
+	le64sym	_kernel_flags_le		// Informative flags, little-endian
 	.quad	0				// reserved
 	.quad	0				// reserved
 	.quad	0				// reserved
@@ -94,14 +96,14 @@ efi_head:
 	.byte	0x4d
 	.byte	0x64
 #ifdef CONFIG_EFI
-	.long	pe_header - efi_head		// Offset to the PE header.
+	.long	pe_header - _head		// Offset to the PE header.
 #else
 	.word	0				// reserved
 #endif
 
 #ifdef CONFIG_EFI
 	.globl	__efistub_stext_offset
-	.set	__efistub_stext_offset, stext - efi_head
+	.set	__efistub_stext_offset, stext - _head
 	.align 3
 pe_header:
 	.ascii	"PE"
@@ -124,7 +126,7 @@ optional_header:
 	.long	_end - stext			// SizeOfCode
 	.long	0				// SizeOfInitializedData
 	.long	0				// SizeOfUninitializedData
-	.long	__efistub_entry - efi_head	// AddressOfEntryPoint
+	.long	__efistub_entry - _head		// AddressOfEntryPoint
 	.long	__efistub_stext_offset		// BaseOfCode
 
 extra_header_fields:
@@ -139,7 +141,7 @@ extra_header_fields:
 	.short	0				// MinorSubsystemVersion
 	.long	0				// Win32VersionValue
 
-	.long	_end - efi_head			// SizeOfImage
+	.long	_end - _head			// SizeOfImage
 
 	// Everything before the kernel image is considered part of the header
 	.long	__efistub_stext_offset		// SizeOfHeaders
@@ -210,6 +212,7 @@ section_table:
 ENTRY(stext)
 	bl	preserve_boot_args
 	bl	el2_setup			// Drop to EL1, w20=cpu_boot_mode
+	mov	x23, xzr			// KASLR offset, defaults to 0
 	adrp	x24, __PHYS_OFFSET
 	bl	set_cpu_boot_mode_flag
 	bl	__create_page_tables		// x25=TTBR0, x26=TTBR1
@@ -219,11 +222,13 @@ ENTRY(stext)
 	 * On return, the CPU will be ready for the MMU to be turned on and
 	 * the TCR will have been set.
 	 */
-	ldr	x27, =__mmap_switched		// address to jump to after
+	ldr	x27, 0f				// address to jump to after
 						// MMU has been enabled
 	adr_l	lr, __enable_mmu		// return (PIC) address
 	b	__cpu_setup			// initialise processor
 ENDPROC(stext)
+	.align	3
+0:	.quad	__mmap_switched - (_head - TEXT_OFFSET) + KIMAGE_VADDR
 
 /*
  * Preserve the arguments passed by the bootloader in x0 .. x3
@@ -311,7 +316,7 @@ ENDPROC(preserve_boot_args)
 __create_page_tables:
 	adrp	x25, idmap_pg_dir
 	adrp	x26, swapper_pg_dir
-	mov	x27, lr
+	mov	x28, lr
 
 	/*
 	 * Invalidate the idmap and swapper page tables to avoid potential
@@ -389,9 +394,11 @@ __create_page_tables:
 	 * Map the kernel image (starting with PHYS_OFFSET).
 	 */
 	mov	x0, x26				// swapper_pg_dir
-	mov	x5, #PAGE_OFFSET
+	ldr	x5, =KIMAGE_VADDR
+	add	x5, x5, x23			// add KASLR displacement
 	create_pgd_entry x0, x5, x3, x6
-	ldr	x6, =KERNEL_END			// __va(KERNEL_END)
+	ldr	w6, kernel_img_size
+	add	x6, x6, x5
 	mov	x3, x24				// phys offset
 	create_block_map x0, x7, x3, x5, x6
 
@@ -405,9 +412,11 @@ __create_page_tables:
 	dmb	sy
 	bl	__inval_cache_range
 
-	mov	lr, x27
-	ret
+	ret	x28
 ENDPROC(__create_page_tables)
+
+kernel_img_size:
+	.long	_end - (_head - TEXT_OFFSET)
 	.ltorg
 
 /*
@@ -415,21 +424,81 @@ ENDPROC(__create_page_tables)
  */
 	.set	initial_sp, init_thread_union + THREAD_START_SP
 __mmap_switched:
-	adr_l	x6, __bss_start
-	adr_l	x7, __bss_stop
+	mov	x28, lr				// preserve LR
+	adr_l	x8, vectors			// load VBAR_EL1 with virtual
+	msr	vbar_el1, x8			// vector table address
+	isb
+
+	// Clear BSS
+	adr_l	x0, __bss_start
+	mov	x1, xzr
+	adr_l	x2, __bss_stop
+	sub	x2, x2, x0
+	bl	__pi_memset
+	dsb	ishst				// Make zero page visible to PTW
+
+#ifdef CONFIG_RELOCATABLE
+
+	/*
+	 * Iterate over each entry in the relocation table, and apply the
+	 * relocations in place.
+	 */
+	adr_l	x8, __dynsym_start		// start of symbol table
+	adr_l	x9, __reloc_start		// start of reloc table
+	adr_l	x10, __reloc_end		// end of reloc table
 
-1:	cmp	x6, x7
+0:	cmp	x9, x10
 	b.hs	2f
-	str	xzr, [x6], #8			// Clear BSS
-	b	1b
-2:
+	ldp	x11, x12, [x9], #24
+	ldr	x13, [x9, #-8]
+	cmp	w12, #R_AARCH64_RELATIVE
+	b.ne	1f
+	add	x13, x13, x23			// relocate
+	str	x13, [x11, x23]
+	b	0b
+
+1:	cmp	w12, #R_AARCH64_ABS64
+	b.ne	0b
+	add	x12, x12, x12, lsl #1		// symtab offset: 24x top word
+	add	x12, x8, x12, lsr #(32 - 3)	// ... shifted into bottom word
+	ldrsh	w14, [x12, #6]			// Elf64_Sym::st_shndx
+	ldr	x15, [x12, #8]			// Elf64_Sym::st_value
+	cmp	w14, #-0xf			// SHN_ABS (0xfff1) ?
+	add	x14, x15, x23			// relocate
+	csel	x15, x14, x15, ne
+	add	x15, x13, x15
+	str	x15, [x11, x23]
+	b	0b
+
+2:	adr_l	x8, kimage_vaddr		// make relocated kimage_vaddr
+	dc	cvac, x8			// value visible to secondaries
+	dsb	sy				// with MMU off
+#endif
+
 	adr_l	sp, initial_sp, x4
+	mov	x4, sp
+	and	x4, x4, #~(THREAD_SIZE - 1)
+	msr	sp_el0, x4			// Save thread_info
 	str_l	x21, __fdt_pointer, x5		// Save FDT pointer
-	str_l	x24, memstart_addr, x6		// Save PHYS_OFFSET
+
+	ldr_l	x4, kimage_vaddr		// Save the offset between
+	sub	x4, x4, x24			// the kernel virtual and
+	str_l	x4, kimage_voffset, x5		// physical mappings
+
 	mov	x29, #0
 #ifdef CONFIG_KASAN
 	bl	kasan_early_init
 #endif
+#ifdef CONFIG_RANDOMIZE_BASE
+	cbnz	x23, 0f				// already running randomized?
+	mov	x0, x21				// pass FDT address in x0
+	bl	kaslr_early_init		// parse FDT for KASLR options
+	cbz	x0, 0f				// KASLR disabled? just proceed
+	mov	x23, x0				// record KASLR offset
+	ret	x28				// we must enable KASLR, return
+						// to __enable_mmu()
+0:
+#endif
 	b	start_kernel
 ENDPROC(__mmap_switched)
 
@@ -438,6 +507,10 @@ ENDPROC(__mmap_switched)
  * hotplug and needs to have the same protections as the text region
  */
 	.section ".text","ax"
+
+ENTRY(kimage_vaddr)
+	.quad		_text - TEXT_OFFSET
+
 /*
  * If we're fortunate enough to boot at EL2, ensure that the world is
  * sane before dropping to EL1.
@@ -462,9 +535,27 @@ CPU_LE(	bic	x0, x0, #(3 << 24)	)	// Clear the EE and E0E bits for EL1
 	isb
 	ret
 
+2:
+#ifdef CONFIG_ARM64_VHE
+	/*
+	 * Check for VHE being present. For the rest of the EL2 setup,
+	 * x2 being non-zero indicates that we do have VHE, and that the
+	 * kernel is intended to run at EL2.
+	 */
+	mrs	x2, id_aa64mmfr1_el1
+	ubfx	x2, x2, #8, #4
+#else
+	mov	x2, xzr
+#endif
+
 	/* Hyp configuration. */
-2:	mov	x0, #(1 << 31)			// 64-bit EL1
+	mov	x0, #HCR_RW			// 64-bit EL1
+	cbz	x2, set_hcr
+	orr	x0, x0, #HCR_TGE		// Enable Host Extensions
+	orr	x0, x0, #HCR_E2H
+set_hcr:
 	msr	hcr_el2, x0
+	isb
 
 	/* Generic timers. */
 	mrs	x0, cnthctl_el2
@@ -512,13 +603,25 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 #endif
 
 	/* EL2 debug */
+	mrs	x0, id_aa64dfr0_el1		// Check ID_AA64DFR0_EL1 PMUVer
+	sbfx	x0, x0, #8, #4
+	cmp	x0, #1
+	b.lt	4f				// Skip if no PMU present
 	mrs	x0, pmcr_el0			// Disable debug access traps
 	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
 	msr	mdcr_el2, x0			// all PMU counters from EL1
+4:
 
 	/* Stage-2 translation */
 	msr	vttbr_el2, xzr
 
+	cbz	x2, install_el2_stub
+
+	mov	w20, #BOOT_CPU_MODE_EL2		// This CPU booted in EL2
+	isb
+	ret
+
+install_el2_stub:
 	/* Hypervisor stub */
 	adrp	x0, __hyp_stub_vectors
 	add	x0, x0, #:lo12:__hyp_stub_vectors
@@ -598,19 +701,51 @@ ENTRY(secondary_startup)
 	adrp	x26, swapper_pg_dir
 	bl	__cpu_setup			// initialise processor
 
-	ldr	x21, =secondary_data
-	ldr	x27, =__secondary_switched	// address to jump to after enabling the MMU
+	ldr	x8, kimage_vaddr
+	ldr	w9, 0f
+	sub	x27, x8, w9, sxtw		// address to jump to after enabling the MMU
 	b	__enable_mmu
 ENDPROC(secondary_startup)
+0:	.long	(_text - TEXT_OFFSET) - __secondary_switched
 
 ENTRY(__secondary_switched)
-	ldr	x0, [x21]			// get secondary_data.stack
+	adr_l	x5, vectors
+	msr	vbar_el1, x5
+	isb
+
+	adr_l	x0, secondary_data
+	ldr	x0, [x0, #CPU_BOOT_STACK]	// get secondary_data.stack
 	mov	sp, x0
+	and	x0, x0, #~(THREAD_SIZE - 1)
+	msr	sp_el0, x0			// save thread_info
 	mov	x29, #0
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)
 
 /*
+ * The booting CPU updates the failed status @__early_cpu_boot_status,
+ * with MMU turned off.
+ *
+ * update_early_cpu_boot_status tmp, status
+ *  - Corrupts tmp1, tmp2
+ *  - Writes 'status' to __early_cpu_boot_status and makes sure
+ *    it is committed to memory.
+ */
+
+	.macro	update_early_cpu_boot_status status, tmp1, tmp2
+	mov	\tmp2, #\status
+	str_l	\tmp2, __early_cpu_boot_status, \tmp1
+	dmb	sy
+	dc	ivac, \tmp1			// Invalidate potentially stale cache line
+	.endm
+
+	.pushsection	.data..cacheline_aligned
+	.align	L1_CACHE_SHIFT
+ENTRY(__early_cpu_boot_status)
+	.long 	0
+	.popsection
+
+/*
  * Enable the MMU.
  *
  *  x0  = SCTLR_EL1 value for turning on the MMU.
@@ -623,12 +758,12 @@ ENDPROC(__secondary_switched)
  */
 	.section	".idmap.text", "ax"
 __enable_mmu:
+	mrs	x22, sctlr_el1			// preserve old SCTLR_EL1 value
 	mrs	x1, ID_AA64MMFR0_EL1
 	ubfx	x2, x1, #ID_AA64MMFR0_TGRAN_SHIFT, 4
 	cmp	x2, #ID_AA64MMFR0_TGRAN_SUPPORTED
 	b.ne	__no_granule_support
-	ldr	x5, =vectors
-	msr	vbar_el1, x5
+	update_early_cpu_boot_status 0, x1, x2
 	msr	ttbr0_el1, x25			// load TTBR0
 	msr	ttbr1_el1, x26			// load TTBR1
 	isb
@@ -642,10 +777,34 @@ __enable_mmu:
 	ic	iallu
 	dsb	nsh
 	isb
+#ifdef CONFIG_RANDOMIZE_BASE
+	mov	x19, x0				// preserve new SCTLR_EL1 value
+	blr	x27
+
+	/*
+	 * If we return here, we have a KASLR displacement in x23 which we need
+	 * to take into account by discarding the current kernel mapping and
+	 * creating a new one.
+	 */
+	msr	sctlr_el1, x22			// disable the MMU
+	isb
+	bl	__create_page_tables		// recreate kernel mapping
+
+	msr	sctlr_el1, x19			// re-enable the MMU
+	isb
+	ic	iallu				// flush instructions fetched
+	dsb	nsh				// via old mapping
+	isb
+	add	x27, x27, x23			// relocated __mmap_switched
+#endif
 	br	x27
 ENDPROC(__enable_mmu)
 
 __no_granule_support:
+	/* Indicate that this CPU can't boot and is stuck in the kernel */
+	update_early_cpu_boot_status CPU_STUCK_IN_KERNEL, x1, x2
+1:
 	wfe
-	b __no_granule_support
+	wfi
+	b 1b
 ENDPROC(__no_granule_support)
diff --git a/arch/arm64/kernel/image.h b/arch/arm64/kernel/image.h
index bc2abb8b1599..5e360ce88f10 100644
--- a/arch/arm64/kernel/image.h
+++ b/arch/arm64/kernel/image.h
@@ -26,31 +26,40 @@
  * There aren't any ELF relocations we can use to endian-swap values known only
  * at link time (e.g. the subtraction of two symbol addresses), so we must get
  * the linker to endian-swap certain values before emitting them.
+ *
+ * Note that, in order for this to work when building the ELF64 PIE executable
+ * (for KASLR), these values should not be referenced via R_AARCH64_ABS64
+ * relocations, since these are fixed up at runtime rather than at build time
+ * when PIE is in effect. So we need to split them up in 32-bit high and low
+ * words.
  */
 #ifdef CONFIG_CPU_BIG_ENDIAN
-#define DATA_LE64(data)					\
-	((((data) & 0x00000000000000ff) << 56) |	\
-	 (((data) & 0x000000000000ff00) << 40) |	\
-	 (((data) & 0x0000000000ff0000) << 24) |	\
-	 (((data) & 0x00000000ff000000) << 8)  |	\
-	 (((data) & 0x000000ff00000000) >> 8)  |	\
-	 (((data) & 0x0000ff0000000000) >> 24) |	\
-	 (((data) & 0x00ff000000000000) >> 40) |	\
-	 (((data) & 0xff00000000000000) >> 56))
+#define DATA_LE32(data)				\
+	((((data) & 0x000000ff) << 24) |	\
+	 (((data) & 0x0000ff00) << 8)  |	\
+	 (((data) & 0x00ff0000) >> 8)  |	\
+	 (((data) & 0xff000000) >> 24))
 #else
-#define DATA_LE64(data) ((data) & 0xffffffffffffffff)
+#define DATA_LE32(data) ((data) & 0xffffffff)
 #endif
 
+#define DEFINE_IMAGE_LE64(sym, data)				\
+	sym##_lo32 = DATA_LE32((data) & 0xffffffff);		\
+	sym##_hi32 = DATA_LE32((data) >> 32)
+
 #ifdef CONFIG_CPU_BIG_ENDIAN
-#define __HEAD_FLAG_BE	1
+#define __HEAD_FLAG_BE		1
 #else
-#define __HEAD_FLAG_BE	0
+#define __HEAD_FLAG_BE		0
 #endif
 
-#define __HEAD_FLAG_PAGE_SIZE ((PAGE_SHIFT - 10) / 2)
+#define __HEAD_FLAG_PAGE_SIZE	((PAGE_SHIFT - 10) / 2)
+
+#define __HEAD_FLAG_PHYS_BASE	1
 
-#define __HEAD_FLAGS	((__HEAD_FLAG_BE << 0) |	\
-			 (__HEAD_FLAG_PAGE_SIZE << 1))
+#define __HEAD_FLAGS		((__HEAD_FLAG_BE << 0) |	\
+				 (__HEAD_FLAG_PAGE_SIZE << 1) |	\
+				 (__HEAD_FLAG_PHYS_BASE << 3))
 
 /*
  * These will output as part of the Image header, which should be little-endian
@@ -58,13 +67,23 @@
  * endian swapped in head.S, all are done here for consistency.
  */
 #define HEAD_SYMBOLS						\
-	_kernel_size_le		= DATA_LE64(_end - _text);	\
-	_kernel_offset_le	= DATA_LE64(TEXT_OFFSET);	\
-	_kernel_flags_le	= DATA_LE64(__HEAD_FLAGS);
+	DEFINE_IMAGE_LE64(_kernel_size_le, _end - _text);	\
+	DEFINE_IMAGE_LE64(_kernel_offset_le, TEXT_OFFSET);	\
+	DEFINE_IMAGE_LE64(_kernel_flags_le, __HEAD_FLAGS);
 
 #ifdef CONFIG_EFI
 
 /*
+ * Prevent the symbol aliases below from being emitted into the kallsyms
+ * table, by forcing them to be absolute symbols (which are conveniently
+ * ignored by scripts/kallsyms) rather than section relative symbols.
+ * The distinction is only relevant for partial linking, and only for symbols
+ * that are defined within a section declaration (which is not the case for
+ * the definitions below) so the resulting values will be identical.
+ */
+#define KALLSYMS_HIDE(sym)	ABSOLUTE(sym)
+
+/*
  * The EFI stub has its own symbol namespace prefixed by __efistub_, to
  * isolate it from the kernel proper. The following symbols are legally
  * accessed by the stub, so provide some aliases to make them accessible.
@@ -73,25 +92,26 @@
  * linked at. The routines below are all implemented in assembler in a
  * position independent manner
  */
-__efistub_memcmp		= __pi_memcmp;
-__efistub_memchr		= __pi_memchr;
-__efistub_memcpy		= __pi_memcpy;
-__efistub_memmove		= __pi_memmove;
-__efistub_memset		= __pi_memset;
-__efistub_strlen		= __pi_strlen;
-__efistub_strcmp		= __pi_strcmp;
-__efistub_strncmp		= __pi_strncmp;
-__efistub___flush_dcache_area	= __pi___flush_dcache_area;
+__efistub_memcmp		= KALLSYMS_HIDE(__pi_memcmp);
+__efistub_memchr		= KALLSYMS_HIDE(__pi_memchr);
+__efistub_memcpy		= KALLSYMS_HIDE(__pi_memcpy);
+__efistub_memmove		= KALLSYMS_HIDE(__pi_memmove);
+__efistub_memset		= KALLSYMS_HIDE(__pi_memset);
+__efistub_strlen		= KALLSYMS_HIDE(__pi_strlen);
+__efistub_strnlen		= KALLSYMS_HIDE(__pi_strnlen);
+__efistub_strcmp		= KALLSYMS_HIDE(__pi_strcmp);
+__efistub_strncmp		= KALLSYMS_HIDE(__pi_strncmp);
+__efistub___flush_dcache_area	= KALLSYMS_HIDE(__pi___flush_dcache_area);
 
 #ifdef CONFIG_KASAN
-__efistub___memcpy		= __pi_memcpy;
-__efistub___memmove		= __pi_memmove;
-__efistub___memset		= __pi_memset;
+__efistub___memcpy		= KALLSYMS_HIDE(__pi_memcpy);
+__efistub___memmove		= KALLSYMS_HIDE(__pi_memmove);
+__efistub___memset		= KALLSYMS_HIDE(__pi_memset);
 #endif
 
-__efistub__text			= _text;
-__efistub__end			= _end;
-__efistub__edata		= _edata;
+__efistub__text			= KALLSYMS_HIDE(_text);
+__efistub__end			= KALLSYMS_HIDE(_end);
+__efistub__edata		= KALLSYMS_HIDE(_edata);
 
 #endif
 
diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index c08b9ad6f429..7371455160e5 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -2,7 +2,7 @@
  * Copyright (C) 2013 Huawei Ltd.
  * Author: Jiang Liu <liuj97@gmail.com>
  *
- * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com>
+ * Copyright (C) 2014-2016 Zi Shen Lim <zlim.lnx@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -363,6 +363,9 @@ u32 __kprobes aarch64_insn_encode_immediate(enum aarch64_insn_imm_type type,
 	u32 immlo, immhi, mask;
 	int shift;
 
+	if (insn == AARCH64_BREAK_FAULT)
+		return AARCH64_BREAK_FAULT;
+
 	switch (type) {
 	case AARCH64_INSN_IMM_ADR:
 		shift = 0;
@@ -377,7 +380,7 @@ u32 __kprobes aarch64_insn_encode_immediate(enum aarch64_insn_imm_type type,
 		if (aarch64_get_imm_shift_mask(type, &mask, &shift) < 0) {
 			pr_err("aarch64_insn_encode_immediate: unknown immediate encoding %d\n",
 			       type);
-			return 0;
+			return AARCH64_BREAK_FAULT;
 		}
 	}
 
@@ -394,9 +397,12 @@ static u32 aarch64_insn_encode_register(enum aarch64_insn_register_type type,
 {
 	int shift;
 
+	if (insn == AARCH64_BREAK_FAULT)
+		return AARCH64_BREAK_FAULT;
+
 	if (reg < AARCH64_INSN_REG_0 || reg > AARCH64_INSN_REG_SP) {
 		pr_err("%s: unknown register encoding %d\n", __func__, reg);
-		return 0;
+		return AARCH64_BREAK_FAULT;
 	}
 
 	switch (type) {
@@ -417,7 +423,7 @@ static u32 aarch64_insn_encode_register(enum aarch64_insn_register_type type,
 	default:
 		pr_err("%s: unknown register type encoding %d\n", __func__,
 		       type);
-		return 0;
+		return AARCH64_BREAK_FAULT;
 	}
 
 	insn &= ~(GENMASK(4, 0) << shift);
@@ -446,7 +452,7 @@ static u32 aarch64_insn_encode_ldst_size(enum aarch64_insn_size_type type,
 		break;
 	default:
 		pr_err("%s: unknown size encoding %d\n", __func__, type);
-		return 0;
+		return AARCH64_BREAK_FAULT;
 	}
 
 	insn &= ~GENMASK(31, 30);
@@ -460,14 +466,17 @@ static inline long branch_imm_common(unsigned long pc, unsigned long addr,
 {
 	long offset;
 
-	/*
-	 * PC: A 64-bit Program Counter holding the address of the current
-	 * instruction. A64 instructions must be word-aligned.
-	 */
-	BUG_ON((pc & 0x3) || (addr & 0x3));
+	if ((pc & 0x3) || (addr & 0x3)) {
+		pr_err("%s: A64 instructions must be word aligned\n", __func__);
+		return range;
+	}
 
 	offset = ((long)addr - (long)pc);
-	BUG_ON(offset < -range || offset >= range);
+
+	if (offset < -range || offset >= range) {
+		pr_err("%s: offset out of range\n", __func__);
+		return range;
+	}
 
 	return offset;
 }
@@ -484,6 +493,8 @@ u32 __kprobes aarch64_insn_gen_branch_imm(unsigned long pc, unsigned long addr,
 	 * texts are within +/-128M.
 	 */
 	offset = branch_imm_common(pc, addr, SZ_128M);
+	if (offset >= SZ_128M)
+		return AARCH64_BREAK_FAULT;
 
 	switch (type) {
 	case AARCH64_INSN_BRANCH_LINK:
@@ -493,7 +504,7 @@ u32 __kprobes aarch64_insn_gen_branch_imm(unsigned long pc, unsigned long addr,
 		insn = aarch64_insn_get_b_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown branch encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -510,6 +521,8 @@ u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr,
 	long offset;
 
 	offset = branch_imm_common(pc, addr, SZ_1M);
+	if (offset >= SZ_1M)
+		return AARCH64_BREAK_FAULT;
 
 	switch (type) {
 	case AARCH64_INSN_BRANCH_COMP_ZERO:
@@ -519,7 +532,7 @@ u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr,
 		insn = aarch64_insn_get_cbnz_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown branch encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -530,7 +543,7 @@ u32 aarch64_insn_gen_comp_branch_imm(unsigned long pc, unsigned long addr,
 		insn |= AARCH64_INSN_SF_BIT;
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -550,7 +563,10 @@ u32 aarch64_insn_gen_cond_branch_imm(unsigned long pc, unsigned long addr,
 
 	insn = aarch64_insn_get_bcond_value();
 
-	BUG_ON(cond < AARCH64_INSN_COND_EQ || cond > AARCH64_INSN_COND_AL);
+	if (cond < AARCH64_INSN_COND_EQ || cond > AARCH64_INSN_COND_AL) {
+		pr_err("%s: unknown condition encoding %d\n", __func__, cond);
+		return AARCH64_BREAK_FAULT;
+	}
 	insn |= cond;
 
 	return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_19, insn,
@@ -583,7 +599,7 @@ u32 aarch64_insn_gen_branch_reg(enum aarch64_insn_register reg,
 		insn = aarch64_insn_get_ret_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown branch encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -606,7 +622,7 @@ u32 aarch64_insn_gen_load_store_reg(enum aarch64_insn_register reg,
 		insn = aarch64_insn_get_str_reg_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown load/store encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -645,26 +661,30 @@ u32 aarch64_insn_gen_load_store_pair(enum aarch64_insn_register reg1,
 		insn = aarch64_insn_get_stp_post_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown load/store encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		/* offset must be multiples of 4 in the range [-256, 252] */
-		BUG_ON(offset & 0x3);
-		BUG_ON(offset < -256 || offset > 252);
+		if ((offset & 0x3) || (offset < -256) || (offset > 252)) {
+			pr_err("%s: offset must be multiples of 4 in the range of [-256, 252] %d\n",
+			       __func__, offset);
+			return AARCH64_BREAK_FAULT;
+		}
 		shift = 2;
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
-		/* offset must be multiples of 8 in the range [-512, 504] */
-		BUG_ON(offset & 0x7);
-		BUG_ON(offset < -512 || offset > 504);
+		if ((offset & 0x7) || (offset < -512) || (offset > 504)) {
+			pr_err("%s: offset must be multiples of 8 in the range of [-512, 504] %d\n",
+			       __func__, offset);
+			return AARCH64_BREAK_FAULT;
+		}
 		shift = 3;
 		insn |= AARCH64_INSN_SF_BIT;
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -702,7 +722,7 @@ u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_subs_imm_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown add/sub encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -713,11 +733,14 @@ u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst,
 		insn |= AARCH64_INSN_SF_BIT;
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
-	BUG_ON(imm & ~(SZ_4K - 1));
+	if (imm & ~(SZ_4K - 1)) {
+		pr_err("%s: invalid immediate encoding %d\n", __func__, imm);
+		return AARCH64_BREAK_FAULT;
+	}
 
 	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
 
@@ -746,7 +769,7 @@ u32 aarch64_insn_gen_bitfield(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_sbfm_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown bitfield encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -759,12 +782,18 @@ u32 aarch64_insn_gen_bitfield(enum aarch64_insn_register dst,
 		mask = GENMASK(5, 0);
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
-	BUG_ON(immr & ~mask);
-	BUG_ON(imms & ~mask);
+	if (immr & ~mask) {
+		pr_err("%s: invalid immr encoding %d\n", __func__, immr);
+		return AARCH64_BREAK_FAULT;
+	}
+	if (imms & ~mask) {
+		pr_err("%s: invalid imms encoding %d\n", __func__, imms);
+		return AARCH64_BREAK_FAULT;
+	}
 
 	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RD, insn, dst);
 
@@ -793,23 +822,33 @@ u32 aarch64_insn_gen_movewide(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_movn_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown movewide encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
-	BUG_ON(imm & ~(SZ_64K - 1));
+	if (imm & ~(SZ_64K - 1)) {
+		pr_err("%s: invalid immediate encoding %d\n", __func__, imm);
+		return AARCH64_BREAK_FAULT;
+	}
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		BUG_ON(shift != 0 && shift != 16);
+		if (shift != 0 && shift != 16) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
 		insn |= AARCH64_INSN_SF_BIT;
-		BUG_ON(shift != 0 && shift != 16 && shift != 32 &&
-		       shift != 48);
+		if (shift != 0 && shift != 16 && shift != 32 && shift != 48) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -843,20 +882,28 @@ u32 aarch64_insn_gen_add_sub_shifted_reg(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_subs_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown add/sub encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		BUG_ON(shift & ~(SZ_32 - 1));
+		if (shift & ~(SZ_32 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
 		insn |= AARCH64_INSN_SF_BIT;
-		BUG_ON(shift & ~(SZ_64 - 1));
+		if (shift & ~(SZ_64 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -885,11 +932,15 @@ u32 aarch64_insn_gen_data1(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_rev32_value();
 		break;
 	case AARCH64_INSN_DATA1_REVERSE_64:
-		BUG_ON(variant != AARCH64_INSN_VARIANT_64BIT);
+		if (variant != AARCH64_INSN_VARIANT_64BIT) {
+			pr_err("%s: invalid variant for reverse64 %d\n",
+			       __func__, variant);
+			return AARCH64_BREAK_FAULT;
+		}
 		insn = aarch64_insn_get_rev64_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown data1 encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -900,7 +951,7 @@ u32 aarch64_insn_gen_data1(enum aarch64_insn_register dst,
 		insn |= AARCH64_INSN_SF_BIT;
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -937,7 +988,7 @@ u32 aarch64_insn_gen_data2(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_rorv_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown data2 encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -948,7 +999,7 @@ u32 aarch64_insn_gen_data2(enum aarch64_insn_register dst,
 		insn |= AARCH64_INSN_SF_BIT;
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -976,7 +1027,7 @@ u32 aarch64_insn_gen_data3(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_msub_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown data3 encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -987,7 +1038,7 @@ u32 aarch64_insn_gen_data3(enum aarch64_insn_register dst,
 		insn |= AARCH64_INSN_SF_BIT;
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
@@ -1037,20 +1088,28 @@ u32 aarch64_insn_gen_logical_shifted_reg(enum aarch64_insn_register dst,
 		insn = aarch64_insn_get_bics_value();
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown logical encoding %d\n", __func__, type);
 		return AARCH64_BREAK_FAULT;
 	}
 
 	switch (variant) {
 	case AARCH64_INSN_VARIANT_32BIT:
-		BUG_ON(shift & ~(SZ_32 - 1));
+		if (shift & ~(SZ_32 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
 		break;
 	case AARCH64_INSN_VARIANT_64BIT:
 		insn |= AARCH64_INSN_SF_BIT;
-		BUG_ON(shift & ~(SZ_64 - 1));
+		if (shift & ~(SZ_64 - 1)) {
+			pr_err("%s: invalid shift encoding %d\n", __func__,
+			       shift);
+			return AARCH64_BREAK_FAULT;
+		}
 		break;
 	default:
-		BUG_ON(1);
+		pr_err("%s: unknown variant encoding %d\n", __func__, variant);
 		return AARCH64_BREAK_FAULT;
 	}
 
diff --git a/arch/arm64/kernel/irq.c b/arch/arm64/kernel/irq.c
index 9f17ec071ee0..2386b26c0712 100644
--- a/arch/arm64/kernel/irq.c
+++ b/arch/arm64/kernel/irq.c
@@ -30,6 +30,9 @@
 
 unsigned long irq_err_count;
 
+/* irq stack only needs to be 16 byte aligned - not IRQ_STACK_SIZE aligned. */
+DEFINE_PER_CPU(unsigned long [IRQ_STACK_SIZE/sizeof(long)], irq_stack) __aligned(16);
+
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
 	show_ipi_list(p, prec);
diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c
new file mode 100644
index 000000000000..582983920054
--- /dev/null
+++ b/arch/arm64/kernel/kaslr.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2016 Linaro Ltd <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/crc32.h>
+#include <linux/init.h>
+#include <linux/libfdt.h>
+#include <linux/mm_types.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include <asm/fixmap.h>
+#include <asm/kernel-pgtable.h>
+#include <asm/memory.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+
+u64 __read_mostly module_alloc_base;
+u16 __initdata memstart_offset_seed;
+
+static __init u64 get_kaslr_seed(void *fdt)
+{
+	int node, len;
+	u64 *prop;
+	u64 ret;
+
+	node = fdt_path_offset(fdt, "/chosen");
+	if (node < 0)
+		return 0;
+
+	prop = fdt_getprop_w(fdt, node, "kaslr-seed", &len);
+	if (!prop || len != sizeof(u64))
+		return 0;
+
+	ret = fdt64_to_cpu(*prop);
+	*prop = 0;
+	return ret;
+}
+
+static __init const u8 *get_cmdline(void *fdt)
+{
+	static __initconst const u8 default_cmdline[] = CONFIG_CMDLINE;
+
+	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
+		int node;
+		const u8 *prop;
+
+		node = fdt_path_offset(fdt, "/chosen");
+		if (node < 0)
+			goto out;
+
+		prop = fdt_getprop(fdt, node, "bootargs", NULL);
+		if (!prop)
+			goto out;
+		return prop;
+	}
+out:
+	return default_cmdline;
+}
+
+extern void *__init __fixmap_remap_fdt(phys_addr_t dt_phys, int *size,
+				       pgprot_t prot);
+
+/*
+ * This routine will be executed with the kernel mapped at its default virtual
+ * address, and if it returns successfully, the kernel will be remapped, and
+ * start_kernel() will be executed from a randomized virtual offset. The
+ * relocation will result in all absolute references (e.g., static variables
+ * containing function pointers) to be reinitialized, and zero-initialized
+ * .bss variables will be reset to 0.
+ */
+u64 __init kaslr_early_init(u64 dt_phys)
+{
+	void *fdt;
+	u64 seed, offset, mask, module_range;
+	const u8 *cmdline, *str;
+	int size;
+
+	/*
+	 * Set a reasonable default for module_alloc_base in case
+	 * we end up running with module randomization disabled.
+	 */
+	module_alloc_base = (u64)_etext - MODULES_VSIZE;
+
+	/*
+	 * Try to map the FDT early. If this fails, we simply bail,
+	 * and proceed with KASLR disabled. We will make another
+	 * attempt at mapping the FDT in setup_machine()
+	 */
+	early_fixmap_init();
+	fdt = __fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL);
+	if (!fdt)
+		return 0;
+
+	/*
+	 * Retrieve (and wipe) the seed from the FDT
+	 */
+	seed = get_kaslr_seed(fdt);
+	if (!seed)
+		return 0;
+
+	/*
+	 * Check if 'nokaslr' appears on the command line, and
+	 * return 0 if that is the case.
+	 */
+	cmdline = get_cmdline(fdt);
+	str = strstr(cmdline, "nokaslr");
+	if (str == cmdline || (str > cmdline && *(str - 1) == ' '))
+		return 0;
+
+	/*
+	 * OK, so we are proceeding with KASLR enabled. Calculate a suitable
+	 * kernel image offset from the seed. Let's place the kernel in the
+	 * lower half of the VMALLOC area (VA_BITS - 2).
+	 * Even if we could randomize at page granularity for 16k and 64k pages,
+	 * let's always round to 2 MB so we don't interfere with the ability to
+	 * map using contiguous PTEs
+	 */
+	mask = ((1UL << (VA_BITS - 2)) - 1) & ~(SZ_2M - 1);
+	offset = seed & mask;
+
+	/* use the top 16 bits to randomize the linear region */
+	memstart_offset_seed = seed >> 48;
+
+	/*
+	 * The kernel Image should not extend across a 1GB/32MB/512MB alignment
+	 * boundary (for 4KB/16KB/64KB granule kernels, respectively). If this
+	 * happens, increase the KASLR offset by the size of the kernel image.
+	 */
+	if ((((u64)_text + offset) >> SWAPPER_TABLE_SHIFT) !=
+	    (((u64)_end + offset) >> SWAPPER_TABLE_SHIFT))
+		offset = (offset + (u64)(_end - _text)) & mask;
+
+	if (IS_ENABLED(CONFIG_KASAN))
+		/*
+		 * KASAN does not expect the module region to intersect the
+		 * vmalloc region, since shadow memory is allocated for each
+		 * module at load time, whereas the vmalloc region is shadowed
+		 * by KASAN zero pages. So keep modules out of the vmalloc
+		 * region if KASAN is enabled.
+		 */
+		return offset;
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_MODULE_REGION_FULL)) {
+		/*
+		 * Randomize the module region independently from the core
+		 * kernel. This prevents modules from leaking any information
+		 * about the address of the kernel itself, but results in
+		 * branches between modules and the core kernel that are
+		 * resolved via PLTs. (Branches between modules will be
+		 * resolved normally.)
+		 */
+		module_range = VMALLOC_END - VMALLOC_START - MODULES_VSIZE;
+		module_alloc_base = VMALLOC_START;
+	} else {
+		/*
+		 * Randomize the module region by setting module_alloc_base to
+		 * a PAGE_SIZE multiple in the range [_etext - MODULES_VSIZE,
+		 * _stext) . This guarantees that the resulting region still
+		 * covers [_stext, _etext], and that all relative branches can
+		 * be resolved without veneers.
+		 */
+		module_range = MODULES_VSIZE - (u64)(_etext - _stext);
+		module_alloc_base = (u64)_etext + offset - MODULES_VSIZE;
+	}
+
+	/* use the lower 21 bits to randomize the base of the module region */
+	module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
+	module_alloc_base &= PAGE_MASK;
+
+	return offset;
+}
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index bcac81e600b9..b67531a13136 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -292,8 +292,8 @@ static struct notifier_block kgdb_notifier = {
 };
 
 /*
- * kgdb_arch_init - Perform any architecture specific initalization.
- * This function will handle the initalization of any architecture
+ * kgdb_arch_init - Perform any architecture specific initialization.
+ * This function will handle the initialization of any architecture
  * specific callbacks.
  */
 int kgdb_arch_init(void)
diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c
new file mode 100644
index 000000000000..1ce90d8450ae
--- /dev/null
+++ b/arch/arm64/kernel/module-plts.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2014-2016 Linaro Ltd. <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/elf.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sort.h>
+
+struct plt_entry {
+	/*
+	 * A program that conforms to the AArch64 Procedure Call Standard
+	 * (AAPCS64) must assume that a veneer that alters IP0 (x16) and/or
+	 * IP1 (x17) may be inserted at any branch instruction that is
+	 * exposed to a relocation that supports long branches. Since that
+	 * is exactly what we are dealing with here, we are free to use x16
+	 * as a scratch register in the PLT veneers.
+	 */
+	__le32	mov0;	/* movn	x16, #0x....			*/
+	__le32	mov1;	/* movk	x16, #0x...., lsl #16		*/
+	__le32	mov2;	/* movk	x16, #0x...., lsl #32		*/
+	__le32	br;	/* br	x16				*/
+};
+
+u64 module_emit_plt_entry(struct module *mod, const Elf64_Rela *rela,
+			  Elf64_Sym *sym)
+{
+	struct plt_entry *plt = (struct plt_entry *)mod->arch.plt->sh_addr;
+	int i = mod->arch.plt_num_entries;
+	u64 val = sym->st_value + rela->r_addend;
+
+	/*
+	 * We only emit PLT entries against undefined (SHN_UNDEF) symbols,
+	 * which are listed in the ELF symtab section, but without a type
+	 * or a size.
+	 * So, similar to how the module loader uses the Elf64_Sym::st_value
+	 * field to store the resolved addresses of undefined symbols, let's
+	 * borrow the Elf64_Sym::st_size field (whose value is never used by
+	 * the module loader, even for symbols that are defined) to record
+	 * the address of a symbol's associated PLT entry as we emit it for a
+	 * zero addend relocation (which is the only kind we have to deal with
+	 * in practice). This allows us to find duplicates without having to
+	 * go through the table every time.
+	 */
+	if (rela->r_addend == 0 && sym->st_size != 0) {
+		BUG_ON(sym->st_size < (u64)plt || sym->st_size >= (u64)&plt[i]);
+		return sym->st_size;
+	}
+
+	mod->arch.plt_num_entries++;
+	BUG_ON(mod->arch.plt_num_entries > mod->arch.plt_max_entries);
+
+	/*
+	 * MOVK/MOVN/MOVZ opcode:
+	 * +--------+------------+--------+-----------+-------------+---------+
+	 * | sf[31] | opc[30:29] | 100101 | hw[22:21] | imm16[20:5] | Rd[4:0] |
+	 * +--------+------------+--------+-----------+-------------+---------+
+	 *
+	 * Rd     := 0x10 (x16)
+	 * hw     := 0b00 (no shift), 0b01 (lsl #16), 0b10 (lsl #32)
+	 * opc    := 0b11 (MOVK), 0b00 (MOVN), 0b10 (MOVZ)
+	 * sf     := 1 (64-bit variant)
+	 */
+	plt[i] = (struct plt_entry){
+		cpu_to_le32(0x92800010 | (((~val      ) & 0xffff)) << 5),
+		cpu_to_le32(0xf2a00010 | ((( val >> 16) & 0xffff)) << 5),
+		cpu_to_le32(0xf2c00010 | ((( val >> 32) & 0xffff)) << 5),
+		cpu_to_le32(0xd61f0200)
+	};
+
+	if (rela->r_addend == 0)
+		sym->st_size = (u64)&plt[i];
+
+	return (u64)&plt[i];
+}
+
+#define cmp_3way(a,b)	((a) < (b) ? -1 : (a) > (b))
+
+static int cmp_rela(const void *a, const void *b)
+{
+	const Elf64_Rela *x = a, *y = b;
+	int i;
+
+	/* sort by type, symbol index and addend */
+	i = cmp_3way(ELF64_R_TYPE(x->r_info), ELF64_R_TYPE(y->r_info));
+	if (i == 0)
+		i = cmp_3way(ELF64_R_SYM(x->r_info), ELF64_R_SYM(y->r_info));
+	if (i == 0)
+		i = cmp_3way(x->r_addend, y->r_addend);
+	return i;
+}
+
+static bool duplicate_rel(const Elf64_Rela *rela, int num)
+{
+	/*
+	 * Entries are sorted by type, symbol index and addend. That means
+	 * that, if a duplicate entry exists, it must be in the preceding
+	 * slot.
+	 */
+	return num > 0 && cmp_rela(rela + num, rela + num - 1) == 0;
+}
+
+static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num)
+{
+	unsigned int ret = 0;
+	Elf64_Sym *s;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		switch (ELF64_R_TYPE(rela[i].r_info)) {
+		case R_AARCH64_JUMP26:
+		case R_AARCH64_CALL26:
+			/*
+			 * We only have to consider branch targets that resolve
+			 * to undefined symbols. This is not simply a heuristic,
+			 * it is a fundamental limitation, since the PLT itself
+			 * is part of the module, and needs to be within 128 MB
+			 * as well, so modules can never grow beyond that limit.
+			 */
+			s = syms + ELF64_R_SYM(rela[i].r_info);
+			if (s->st_shndx != SHN_UNDEF)
+				break;
+
+			/*
+			 * Jump relocations with non-zero addends against
+			 * undefined symbols are supported by the ELF spec, but
+			 * do not occur in practice (e.g., 'jump n bytes past
+			 * the entry point of undefined function symbol f').
+			 * So we need to support them, but there is no need to
+			 * take them into consideration when trying to optimize
+			 * this code. So let's only check for duplicates when
+			 * the addend is zero: this allows us to record the PLT
+			 * entry address in the symbol table itself, rather than
+			 * having to search the list for duplicates each time we
+			 * emit one.
+			 */
+			if (rela[i].r_addend != 0 || !duplicate_rel(rela, i))
+				ret++;
+			break;
+		}
+	}
+	return ret;
+}
+
+int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
+			      char *secstrings, struct module *mod)
+{
+	unsigned long plt_max_entries = 0;
+	Elf64_Sym *syms = NULL;
+	int i;
+
+	/*
+	 * Find the empty .plt section so we can expand it to store the PLT
+	 * entries. Record the symtab address as well.
+	 */
+	for (i = 0; i < ehdr->e_shnum; i++) {
+		if (strcmp(".plt", secstrings + sechdrs[i].sh_name) == 0)
+			mod->arch.plt = sechdrs + i;
+		else if (sechdrs[i].sh_type == SHT_SYMTAB)
+			syms = (Elf64_Sym *)sechdrs[i].sh_addr;
+	}
+
+	if (!mod->arch.plt) {
+		pr_err("%s: module PLT section missing\n", mod->name);
+		return -ENOEXEC;
+	}
+	if (!syms) {
+		pr_err("%s: module symtab section missing\n", mod->name);
+		return -ENOEXEC;
+	}
+
+	for (i = 0; i < ehdr->e_shnum; i++) {
+		Elf64_Rela *rels = (void *)ehdr + sechdrs[i].sh_offset;
+		int numrels = sechdrs[i].sh_size / sizeof(Elf64_Rela);
+		Elf64_Shdr *dstsec = sechdrs + sechdrs[i].sh_info;
+
+		if (sechdrs[i].sh_type != SHT_RELA)
+			continue;
+
+		/* ignore relocations that operate on non-exec sections */
+		if (!(dstsec->sh_flags & SHF_EXECINSTR))
+			continue;
+
+		/* sort by type, symbol index and addend */
+		sort(rels, numrels, sizeof(Elf64_Rela), cmp_rela, NULL);
+
+		plt_max_entries += count_plts(syms, rels, numrels);
+	}
+
+	mod->arch.plt->sh_type = SHT_NOBITS;
+	mod->arch.plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+	mod->arch.plt->sh_addralign = L1_CACHE_BYTES;
+	mod->arch.plt->sh_size = plt_max_entries * sizeof(struct plt_entry);
+	mod->arch.plt_num_entries = 0;
+	mod->arch.plt_max_entries = plt_max_entries;
+	return 0;
+}
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index f4bc779e62e8..7f316982ce00 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -30,17 +30,30 @@
 #include <asm/insn.h>
 #include <asm/sections.h>
 
-#define	AARCH64_INSN_IMM_MOVNZ		AARCH64_INSN_IMM_MAX
-#define	AARCH64_INSN_IMM_MOVK		AARCH64_INSN_IMM_16
-
 void *module_alloc(unsigned long size)
 {
 	void *p;
 
-	p = __vmalloc_node_range(size, MODULE_ALIGN, MODULES_VADDR, MODULES_END,
+	p = __vmalloc_node_range(size, MODULE_ALIGN, module_alloc_base,
+				module_alloc_base + MODULES_VSIZE,
 				GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
 				NUMA_NO_NODE, __builtin_return_address(0));
 
+	if (!p && IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) &&
+	    !IS_ENABLED(CONFIG_KASAN))
+		/*
+		 * KASAN can only deal with module allocations being served
+		 * from the reserved module region, since the remainder of
+		 * the vmalloc region is already backed by zero shadow pages,
+		 * and punching holes into it is non-trivial. Since the module
+		 * region is not randomized when KASAN is enabled, it is even
+		 * less likely that the module region gets exhausted, so we
+		 * can simply omit this fallback in that case.
+		 */
+		p = __vmalloc_node_range(size, MODULE_ALIGN, VMALLOC_START,
+				VMALLOC_END, GFP_KERNEL, PAGE_KERNEL_EXEC, 0,
+				NUMA_NO_NODE, __builtin_return_address(0));
+
 	if (p && (kasan_module_alloc(p, size) < 0)) {
 		vfree(p);
 		return NULL;
@@ -75,15 +88,18 @@ static u64 do_reloc(enum aarch64_reloc_op reloc_op, void *place, u64 val)
 
 static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
 {
-	u64 imm_mask = (1 << len) - 1;
 	s64 sval = do_reloc(op, place, val);
 
 	switch (len) {
 	case 16:
 		*(s16 *)place = sval;
+		if (sval < S16_MIN || sval > U16_MAX)
+			return -ERANGE;
 		break;
 	case 32:
 		*(s32 *)place = sval;
+		if (sval < S32_MIN || sval > U32_MAX)
+			return -ERANGE;
 		break;
 	case 64:
 		*(s64 *)place = sval;
@@ -92,34 +108,23 @@ static int reloc_data(enum aarch64_reloc_op op, void *place, u64 val, int len)
 		pr_err("Invalid length (%d) for data relocation\n", len);
 		return 0;
 	}
-
-	/*
-	 * Extract the upper value bits (including the sign bit) and
-	 * shift them to bit 0.
-	 */
-	sval = (s64)(sval & ~(imm_mask >> 1)) >> (len - 1);
-
-	/*
-	 * Overflow has occurred if the value is not representable in
-	 * len bits (i.e the bottom len bits are not sign-extended and
-	 * the top bits are not all zero).
-	 */
-	if ((u64)(sval + 1) > 2)
-		return -ERANGE;
-
 	return 0;
 }
 
+enum aarch64_insn_movw_imm_type {
+	AARCH64_INSN_IMM_MOVNZ,
+	AARCH64_INSN_IMM_MOVKZ,
+};
+
 static int reloc_insn_movw(enum aarch64_reloc_op op, void *place, u64 val,
-			   int lsb, enum aarch64_insn_imm_type imm_type)
+			   int lsb, enum aarch64_insn_movw_imm_type imm_type)
 {
-	u64 imm, limit = 0;
+	u64 imm;
 	s64 sval;
 	u32 insn = le32_to_cpu(*(u32 *)place);
 
 	sval = do_reloc(op, place, val);
-	sval >>= lsb;
-	imm = sval & 0xffff;
+	imm = sval >> lsb;
 
 	if (imm_type == AARCH64_INSN_IMM_MOVNZ) {
 		/*
@@ -128,7 +133,7 @@ static int reloc_insn_movw(enum aarch64_reloc_op op, void *place, u64 val,
 		 * immediate is less than zero.
 		 */
 		insn &= ~(3 << 29);
-		if ((s64)imm >= 0) {
+		if (sval >= 0) {
 			/* >=0: Set the instruction to MOVZ (opcode 10b). */
 			insn |= 2 << 29;
 		} else {
@@ -140,29 +145,13 @@ static int reloc_insn_movw(enum aarch64_reloc_op op, void *place, u64 val,
 			 */
 			imm = ~imm;
 		}
-		imm_type = AARCH64_INSN_IMM_MOVK;
 	}
 
 	/* Update the instruction with the new encoding. */
-	insn = aarch64_insn_encode_immediate(imm_type, insn, imm);
+	insn = aarch64_insn_encode_immediate(AARCH64_INSN_IMM_16, insn, imm);
 	*(u32 *)place = cpu_to_le32(insn);
 
-	/* Shift out the immediate field. */
-	sval >>= 16;
-
-	/*
-	 * For unsigned immediates, the overflow check is straightforward.
-	 * For signed immediates, the sign bit is actually the bit past the
-	 * most significant bit of the field.
-	 * The AARCH64_INSN_IMM_16 immediate type is unsigned.
-	 */
-	if (imm_type != AARCH64_INSN_IMM_16) {
-		sval++;
-		limit++;
-	}
-
-	/* Check the upper bits depending on the sign of the immediate. */
-	if ((u64)sval > limit)
+	if (imm > U16_MAX)
 		return -ERANGE;
 
 	return 0;
@@ -267,25 +256,25 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			overflow_check = false;
 		case R_AARCH64_MOVW_UABS_G0:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
-					      AARCH64_INSN_IMM_16);
+					      AARCH64_INSN_IMM_MOVKZ);
 			break;
 		case R_AARCH64_MOVW_UABS_G1_NC:
 			overflow_check = false;
 		case R_AARCH64_MOVW_UABS_G1:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16,
-					      AARCH64_INSN_IMM_16);
+					      AARCH64_INSN_IMM_MOVKZ);
 			break;
 		case R_AARCH64_MOVW_UABS_G2_NC:
 			overflow_check = false;
 		case R_AARCH64_MOVW_UABS_G2:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32,
-					      AARCH64_INSN_IMM_16);
+					      AARCH64_INSN_IMM_MOVKZ);
 			break;
 		case R_AARCH64_MOVW_UABS_G3:
 			/* We're using the top bits so we can't overflow. */
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 48,
-					      AARCH64_INSN_IMM_16);
+					      AARCH64_INSN_IMM_MOVKZ);
 			break;
 		case R_AARCH64_MOVW_SABS_G0:
 			ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0,
@@ -302,7 +291,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		case R_AARCH64_MOVW_PREL_G0_NC:
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
-					      AARCH64_INSN_IMM_MOVK);
+					      AARCH64_INSN_IMM_MOVKZ);
 			break;
 		case R_AARCH64_MOVW_PREL_G0:
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 0,
@@ -311,7 +300,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		case R_AARCH64_MOVW_PREL_G1_NC:
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
-					      AARCH64_INSN_IMM_MOVK);
+					      AARCH64_INSN_IMM_MOVKZ);
 			break;
 		case R_AARCH64_MOVW_PREL_G1:
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 16,
@@ -320,7 +309,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		case R_AARCH64_MOVW_PREL_G2_NC:
 			overflow_check = false;
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
-					      AARCH64_INSN_IMM_MOVK);
+					      AARCH64_INSN_IMM_MOVKZ);
 			break;
 		case R_AARCH64_MOVW_PREL_G2:
 			ovf = reloc_insn_movw(RELOC_OP_PREL, loc, val, 32,
@@ -388,6 +377,13 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		case R_AARCH64_CALL26:
 			ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2, 26,
 					     AARCH64_INSN_IMM_26);
+
+			if (IS_ENABLED(CONFIG_ARM64_MODULE_PLTS) &&
+			    ovf == -ERANGE) {
+				val = module_emit_plt_entry(me, &rel[i], sym);
+				ovf = reloc_insn_imm(RELOC_OP_PREL, loc, val, 2,
+						     26, AARCH64_INSN_IMM_26);
+			}
 			break;
 
 		default:
diff --git a/arch/arm64/kernel/module.lds b/arch/arm64/kernel/module.lds
new file mode 100644
index 000000000000..8949f6c6f729
--- /dev/null
+++ b/arch/arm64/kernel/module.lds
@@ -0,0 +1,3 @@
+SECTIONS {
+	.plt (NOLOAD) : { BYTE(0) }
+}
diff --git a/arch/arm64/kernel/paravirt.c b/arch/arm64/kernel/paravirt.c
new file mode 100644
index 000000000000..53f371ed4568
--- /dev/null
+++ b/arch/arm64/kernel/paravirt.c
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2013 Citrix Systems
+ *
+ * Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
+ */
+
+#include <linux/export.h>
+#include <linux/jump_label.h>
+#include <linux/types.h>
+#include <asm/paravirt.h>
+
+struct static_key paravirt_steal_enabled;
+struct static_key paravirt_steal_rq_enabled;
+
+struct pv_time_ops pv_time_ops;
+EXPORT_SYMBOL_GPL(pv_time_ops);
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index b3d098bd34aa..c72de668e1d4 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -19,8 +19,6 @@
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 
-#include <asm/pci-bridge.h>
-
 /*
  * Called after each bus is probed, but before its children are examined
  */
diff --git a/arch/arm64/kernel/perf_callchain.c b/arch/arm64/kernel/perf_callchain.c
index 3aa74830cc69..ff4665462a02 100644
--- a/arch/arm64/kernel/perf_callchain.c
+++ b/arch/arm64/kernel/perf_callchain.c
@@ -164,8 +164,11 @@ void perf_callchain_kernel(struct perf_callchain_entry *entry,
 	frame.fp = regs->regs[29];
 	frame.sp = regs->sp;
 	frame.pc = regs->pc;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	frame.graph = current->curr_ret_stack;
+#endif
 
-	walk_stackframe(&frame, callchain_trace, entry);
+	walk_stackframe(current, &frame, callchain_trace, entry);
 }
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 5b1897e8ca24..f419a7c075a4 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -20,6 +20,8 @@
  */
 
 #include <asm/irq_regs.h>
+#include <asm/perf_event.h>
+#include <asm/virt.h>
 
 #include <linux/of.h>
 #include <linux/perf/arm_pmu.h>
@@ -29,60 +31,83 @@
  * ARMv8 PMUv3 Performance Events handling code.
  * Common event types.
  */
-enum armv8_pmuv3_perf_types {
-	/* Required events. */
-	ARMV8_PMUV3_PERFCTR_PMNC_SW_INCR			= 0x00,
-	ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL			= 0x03,
-	ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS			= 0x04,
-	ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED			= 0x10,
-	ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES			= 0x11,
-	ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED			= 0x12,
-
-	/* At least one of the following is required. */
-	ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED			= 0x08,
-	ARMV8_PMUV3_PERFCTR_OP_SPEC				= 0x1B,
-
-	/* Common architectural events. */
-	ARMV8_PMUV3_PERFCTR_MEM_READ				= 0x06,
-	ARMV8_PMUV3_PERFCTR_MEM_WRITE				= 0x07,
-	ARMV8_PMUV3_PERFCTR_EXC_TAKEN				= 0x09,
-	ARMV8_PMUV3_PERFCTR_EXC_EXECUTED			= 0x0A,
-	ARMV8_PMUV3_PERFCTR_CID_WRITE				= 0x0B,
-	ARMV8_PMUV3_PERFCTR_PC_WRITE				= 0x0C,
-	ARMV8_PMUV3_PERFCTR_PC_IMM_BRANCH			= 0x0D,
-	ARMV8_PMUV3_PERFCTR_PC_PROC_RETURN			= 0x0E,
-	ARMV8_PMUV3_PERFCTR_MEM_UNALIGNED_ACCESS		= 0x0F,
-	ARMV8_PMUV3_PERFCTR_TTBR_WRITE				= 0x1C,
-
-	/* Common microarchitectural events. */
-	ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL			= 0x01,
-	ARMV8_PMUV3_PERFCTR_ITLB_REFILL				= 0x02,
-	ARMV8_PMUV3_PERFCTR_DTLB_REFILL				= 0x05,
-	ARMV8_PMUV3_PERFCTR_MEM_ACCESS				= 0x13,
-	ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS			= 0x14,
-	ARMV8_PMUV3_PERFCTR_L1_DCACHE_WB			= 0x15,
-	ARMV8_PMUV3_PERFCTR_L2_CACHE_ACCESS			= 0x16,
-	ARMV8_PMUV3_PERFCTR_L2_CACHE_REFILL			= 0x17,
-	ARMV8_PMUV3_PERFCTR_L2_CACHE_WB				= 0x18,
-	ARMV8_PMUV3_PERFCTR_BUS_ACCESS				= 0x19,
-	ARMV8_PMUV3_PERFCTR_MEM_ERROR				= 0x1A,
-	ARMV8_PMUV3_PERFCTR_BUS_CYCLES				= 0x1D,
-};
+
+/* Required events. */
+#define ARMV8_PMUV3_PERFCTR_PMNC_SW_INCR			0x00
+#define ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL			0x03
+#define ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS			0x04
+#define ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED			0x10
+#define ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES			0x11
+#define ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED			0x12
+
+/* At least one of the following is required. */
+#define ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED			0x08
+#define ARMV8_PMUV3_PERFCTR_OP_SPEC				0x1B
+
+/* Common architectural events. */
+#define ARMV8_PMUV3_PERFCTR_MEM_READ				0x06
+#define ARMV8_PMUV3_PERFCTR_MEM_WRITE				0x07
+#define ARMV8_PMUV3_PERFCTR_EXC_TAKEN				0x09
+#define ARMV8_PMUV3_PERFCTR_EXC_EXECUTED			0x0A
+#define ARMV8_PMUV3_PERFCTR_CID_WRITE				0x0B
+#define ARMV8_PMUV3_PERFCTR_PC_WRITE				0x0C
+#define ARMV8_PMUV3_PERFCTR_PC_IMM_BRANCH			0x0D
+#define ARMV8_PMUV3_PERFCTR_PC_PROC_RETURN			0x0E
+#define ARMV8_PMUV3_PERFCTR_MEM_UNALIGNED_ACCESS		0x0F
+#define ARMV8_PMUV3_PERFCTR_TTBR_WRITE				0x1C
+#define ARMV8_PMUV3_PERFCTR_CHAIN				0x1E
+#define ARMV8_PMUV3_PERFCTR_BR_RETIRED				0x21
+
+/* Common microarchitectural events. */
+#define ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL			0x01
+#define ARMV8_PMUV3_PERFCTR_ITLB_REFILL				0x02
+#define ARMV8_PMUV3_PERFCTR_DTLB_REFILL				0x05
+#define ARMV8_PMUV3_PERFCTR_MEM_ACCESS				0x13
+#define ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS			0x14
+#define ARMV8_PMUV3_PERFCTR_L1_DCACHE_WB			0x15
+#define ARMV8_PMUV3_PERFCTR_L2_CACHE_ACCESS			0x16
+#define ARMV8_PMUV3_PERFCTR_L2_CACHE_REFILL			0x17
+#define ARMV8_PMUV3_PERFCTR_L2_CACHE_WB				0x18
+#define ARMV8_PMUV3_PERFCTR_BUS_ACCESS				0x19
+#define ARMV8_PMUV3_PERFCTR_MEM_ERROR				0x1A
+#define ARMV8_PMUV3_PERFCTR_BUS_CYCLES				0x1D
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE			0x1F
+#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE			0x20
+#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED			0x22
+#define ARMV8_PMUV3_PERFCTR_STALL_FRONTEND			0x23
+#define ARMV8_PMUV3_PERFCTR_STALL_BACKEND			0x24
+#define ARMV8_PMUV3_PERFCTR_L1D_TLB				0x25
+#define ARMV8_PMUV3_PERFCTR_L1I_TLB				0x26
+#define ARMV8_PMUV3_PERFCTR_L2I_CACHE				0x27
+#define ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL			0x28
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE			0x29
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL			0x2A
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE				0x2B
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB			0x2C
+#define ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL			0x2D
+#define ARMV8_PMUV3_PERFCTR_L21_TLB_REFILL			0x2E
+#define ARMV8_PMUV3_PERFCTR_L2D_TLB				0x2F
+#define ARMV8_PMUV3_PERFCTR_L21_TLB				0x30
+
+/* ARMv8 implementation defined event types. */
+#define ARMV8_IMPDEF_PERFCTR_L1_DCACHE_ACCESS_LD		0x40
+#define ARMV8_IMPDEF_PERFCTR_L1_DCACHE_ACCESS_ST		0x41
+#define ARMV8_IMPDEF_PERFCTR_L1_DCACHE_REFILL_LD		0x42
+#define ARMV8_IMPDEF_PERFCTR_L1_DCACHE_REFILL_ST		0x43
+#define ARMV8_IMPDEF_PERFCTR_DTLB_REFILL_LD			0x4C
+#define ARMV8_IMPDEF_PERFCTR_DTLB_REFILL_ST			0x4D
+#define ARMV8_IMPDEF_PERFCTR_DTLB_ACCESS_LD			0x4E
+#define ARMV8_IMPDEF_PERFCTR_DTLB_ACCESS_ST			0x4F
 
 /* ARMv8 Cortex-A53 specific event types. */
-enum armv8_a53_pmu_perf_types {
-	ARMV8_A53_PERFCTR_PREFETCH_LINEFILL			= 0xC2,
-};
+#define ARMV8_A53_PERFCTR_PREFETCH_LINEFILL			0xC2
 
-/* ARMv8 Cortex-A57 specific event types. */
-enum armv8_a57_perf_types {
-	ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_LD			= 0x40,
-	ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_ST			= 0x41,
-	ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_LD			= 0x42,
-	ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_ST			= 0x43,
-	ARMV8_A57_PERFCTR_DTLB_REFILL_LD			= 0x4c,
-	ARMV8_A57_PERFCTR_DTLB_REFILL_ST			= 0x4d,
-};
+/* ARMv8 Cavium ThunderX specific event types. */
+#define ARMV8_THUNDER_PERFCTR_L1_DCACHE_MISS_ST			0xE9
+#define ARMV8_THUNDER_PERFCTR_L1_DCACHE_PREF_ACCESS		0xEA
+#define ARMV8_THUNDER_PERFCTR_L1_DCACHE_PREF_MISS		0xEB
+#define ARMV8_THUNDER_PERFCTR_L1_ICACHE_PREF_ACCESS		0xEC
+#define ARMV8_THUNDER_PERFCTR_L1_ICACHE_PREF_MISS		0xED
 
 /* PMUv3 HW events mapping. */
 static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
@@ -106,6 +131,7 @@ static const unsigned armv8_a53_perf_map[PERF_COUNT_HW_MAX] = {
 	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV8_PMUV3_PERFCTR_BUS_CYCLES,
 };
 
+/* ARM Cortex-A57 and Cortex-A72 events mapping. */
 static const unsigned armv8_a57_perf_map[PERF_COUNT_HW_MAX] = {
 	PERF_MAP_ALL_UNSUPPORTED,
 	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
@@ -116,6 +142,18 @@ static const unsigned armv8_a57_perf_map[PERF_COUNT_HW_MAX] = {
 	[PERF_COUNT_HW_BUS_CYCLES]		= ARMV8_PMUV3_PERFCTR_BUS_CYCLES,
 };
 
+static const unsigned armv8_thunder_perf_map[PERF_COUNT_HW_MAX] = {
+	PERF_MAP_ALL_UNSUPPORTED,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
+	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS]	= ARMV8_PMUV3_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]		= ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV8_PMUV3_PERFCTR_STALL_FRONTEND,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND]	= ARMV8_PMUV3_PERFCTR_STALL_BACKEND,
+};
+
 static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 						[PERF_COUNT_HW_CACHE_OP_MAX]
 						[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
@@ -159,16 +197,16 @@ static const unsigned armv8_a57_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 					      [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
 	PERF_CACHE_MAP_ALL_UNSUPPORTED,
 
-	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_LD,
-	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_LD,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_A57_PERFCTR_L1_DCACHE_ACCESS_ST,
-	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_A57_PERFCTR_L1_DCACHE_REFILL_ST,
+	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1_DCACHE_ACCESS_LD,
+	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1_DCACHE_REFILL_LD,
+	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1_DCACHE_ACCESS_ST,
+	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1_DCACHE_REFILL_ST,
 
 	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS,
 	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL,
 
-	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_A57_PERFCTR_DTLB_REFILL_LD,
-	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_A57_PERFCTR_DTLB_REFILL_ST,
+	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_DTLB_REFILL_LD,
+	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_DTLB_REFILL_ST,
 
 	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_ITLB_REFILL,
 
@@ -178,6 +216,166 @@ static const unsigned armv8_a57_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
 };
 
+static const unsigned armv8_thunder_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+						   [PERF_COUNT_HW_CACHE_OP_MAX]
+						   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	PERF_CACHE_MAP_ALL_UNSUPPORTED,
+
+	[C(L1D)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1_DCACHE_ACCESS_LD,
+	[C(L1D)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_L1_DCACHE_REFILL_LD,
+	[C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_L1_DCACHE_ACCESS_ST,
+	[C(L1D)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_THUNDER_PERFCTR_L1_DCACHE_MISS_ST,
+	[C(L1D)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV8_THUNDER_PERFCTR_L1_DCACHE_PREF_ACCESS,
+	[C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_THUNDER_PERFCTR_L1_DCACHE_PREF_MISS,
+
+	[C(L1I)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS,
+	[C(L1I)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL,
+	[C(L1I)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV8_THUNDER_PERFCTR_L1_ICACHE_PREF_ACCESS,
+	[C(L1I)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV8_THUNDER_PERFCTR_L1_ICACHE_PREF_MISS,
+
+	[C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_IMPDEF_PERFCTR_DTLB_ACCESS_LD,
+	[C(DTLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_DTLB_REFILL_LD,
+	[C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_IMPDEF_PERFCTR_DTLB_ACCESS_ST,
+	[C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_IMPDEF_PERFCTR_DTLB_REFILL_ST,
+
+	[C(ITLB)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_ITLB_REFILL,
+
+	[C(BPU)][C(OP_READ)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+	[C(BPU)][C(OP_READ)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+	[C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED,
+	[C(BPU)][C(OP_WRITE)][C(RESULT_MISS)]	= ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED,
+};
+
+#define ARMV8_EVENT_ATTR_RESOLVE(m) #m
+#define ARMV8_EVENT_ATTR(name, config) \
+	PMU_EVENT_ATTR_STRING(name, armv8_event_attr_##name, \
+			      "event=" ARMV8_EVENT_ATTR_RESOLVE(config))
+
+ARMV8_EVENT_ATTR(sw_incr, ARMV8_PMUV3_PERFCTR_PMNC_SW_INCR);
+ARMV8_EVENT_ATTR(l1i_cache_refill, ARMV8_PMUV3_PERFCTR_L1_ICACHE_REFILL);
+ARMV8_EVENT_ATTR(l1i_tlb_refill, ARMV8_PMUV3_PERFCTR_ITLB_REFILL);
+ARMV8_EVENT_ATTR(l1d_cache_refill, ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL);
+ARMV8_EVENT_ATTR(l1d_cache, ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS);
+ARMV8_EVENT_ATTR(l1d_tlb_refill, ARMV8_PMUV3_PERFCTR_DTLB_REFILL);
+ARMV8_EVENT_ATTR(ld_retired, ARMV8_PMUV3_PERFCTR_MEM_READ);
+ARMV8_EVENT_ATTR(st_retired, ARMV8_PMUV3_PERFCTR_MEM_WRITE);
+ARMV8_EVENT_ATTR(inst_retired, ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED);
+ARMV8_EVENT_ATTR(exc_taken, ARMV8_PMUV3_PERFCTR_EXC_TAKEN);
+ARMV8_EVENT_ATTR(exc_return, ARMV8_PMUV3_PERFCTR_EXC_EXECUTED);
+ARMV8_EVENT_ATTR(cid_write_retired, ARMV8_PMUV3_PERFCTR_CID_WRITE);
+ARMV8_EVENT_ATTR(pc_write_retired, ARMV8_PMUV3_PERFCTR_PC_WRITE);
+ARMV8_EVENT_ATTR(br_immed_retired, ARMV8_PMUV3_PERFCTR_PC_IMM_BRANCH);
+ARMV8_EVENT_ATTR(br_return_retired, ARMV8_PMUV3_PERFCTR_PC_PROC_RETURN);
+ARMV8_EVENT_ATTR(unaligned_ldst_retired, ARMV8_PMUV3_PERFCTR_MEM_UNALIGNED_ACCESS);
+ARMV8_EVENT_ATTR(br_mis_pred, ARMV8_PMUV3_PERFCTR_PC_BRANCH_MIS_PRED);
+ARMV8_EVENT_ATTR(cpu_cycles, ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES);
+ARMV8_EVENT_ATTR(br_pred, ARMV8_PMUV3_PERFCTR_PC_BRANCH_PRED);
+ARMV8_EVENT_ATTR(mem_access, ARMV8_PMUV3_PERFCTR_MEM_ACCESS);
+ARMV8_EVENT_ATTR(l1i_cache, ARMV8_PMUV3_PERFCTR_L1_ICACHE_ACCESS);
+ARMV8_EVENT_ATTR(l1d_cache_wb, ARMV8_PMUV3_PERFCTR_L1_DCACHE_WB);
+ARMV8_EVENT_ATTR(l2d_cache, ARMV8_PMUV3_PERFCTR_L2_CACHE_ACCESS);
+ARMV8_EVENT_ATTR(l2d_cache_refill, ARMV8_PMUV3_PERFCTR_L2_CACHE_REFILL);
+ARMV8_EVENT_ATTR(l2d_cache_wb, ARMV8_PMUV3_PERFCTR_L2_CACHE_WB);
+ARMV8_EVENT_ATTR(bus_access, ARMV8_PMUV3_PERFCTR_BUS_ACCESS);
+ARMV8_EVENT_ATTR(memory_error, ARMV8_PMUV3_PERFCTR_MEM_ERROR);
+ARMV8_EVENT_ATTR(inst_spec, ARMV8_PMUV3_PERFCTR_OP_SPEC);
+ARMV8_EVENT_ATTR(ttbr_write_retired, ARMV8_PMUV3_PERFCTR_TTBR_WRITE);
+ARMV8_EVENT_ATTR(bus_cycles, ARMV8_PMUV3_PERFCTR_BUS_CYCLES);
+ARMV8_EVENT_ATTR(chain, ARMV8_PMUV3_PERFCTR_CHAIN);
+ARMV8_EVENT_ATTR(l1d_cache_allocate, ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE);
+ARMV8_EVENT_ATTR(l2d_cache_allocate, ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE);
+ARMV8_EVENT_ATTR(br_retired, ARMV8_PMUV3_PERFCTR_BR_RETIRED);
+ARMV8_EVENT_ATTR(br_mis_pred_retired, ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED);
+ARMV8_EVENT_ATTR(stall_frontend, ARMV8_PMUV3_PERFCTR_STALL_FRONTEND);
+ARMV8_EVENT_ATTR(stall_backend, ARMV8_PMUV3_PERFCTR_STALL_BACKEND);
+ARMV8_EVENT_ATTR(l1d_tlb, ARMV8_PMUV3_PERFCTR_L1D_TLB);
+ARMV8_EVENT_ATTR(l1i_tlb, ARMV8_PMUV3_PERFCTR_L1I_TLB);
+ARMV8_EVENT_ATTR(l2i_cache, ARMV8_PMUV3_PERFCTR_L2I_CACHE);
+ARMV8_EVENT_ATTR(l2i_cache_refill, ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL);
+ARMV8_EVENT_ATTR(l3d_cache_allocate, ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE);
+ARMV8_EVENT_ATTR(l3d_cache_refill, ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL);
+ARMV8_EVENT_ATTR(l3d_cache, ARMV8_PMUV3_PERFCTR_L3D_CACHE);
+ARMV8_EVENT_ATTR(l3d_cache_wb, ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB);
+ARMV8_EVENT_ATTR(l2d_tlb_refill, ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL);
+ARMV8_EVENT_ATTR(l21_tlb_refill, ARMV8_PMUV3_PERFCTR_L21_TLB_REFILL);
+ARMV8_EVENT_ATTR(l2d_tlb, ARMV8_PMUV3_PERFCTR_L2D_TLB);
+ARMV8_EVENT_ATTR(l21_tlb, ARMV8_PMUV3_PERFCTR_L21_TLB);
+
+static struct attribute *armv8_pmuv3_event_attrs[] = {
+	&armv8_event_attr_sw_incr.attr.attr,
+	&armv8_event_attr_l1i_cache_refill.attr.attr,
+	&armv8_event_attr_l1i_tlb_refill.attr.attr,
+	&armv8_event_attr_l1d_cache_refill.attr.attr,
+	&armv8_event_attr_l1d_cache.attr.attr,
+	&armv8_event_attr_l1d_tlb_refill.attr.attr,
+	&armv8_event_attr_ld_retired.attr.attr,
+	&armv8_event_attr_st_retired.attr.attr,
+	&armv8_event_attr_inst_retired.attr.attr,
+	&armv8_event_attr_exc_taken.attr.attr,
+	&armv8_event_attr_exc_return.attr.attr,
+	&armv8_event_attr_cid_write_retired.attr.attr,
+	&armv8_event_attr_pc_write_retired.attr.attr,
+	&armv8_event_attr_br_immed_retired.attr.attr,
+	&armv8_event_attr_br_return_retired.attr.attr,
+	&armv8_event_attr_unaligned_ldst_retired.attr.attr,
+	&armv8_event_attr_br_mis_pred.attr.attr,
+	&armv8_event_attr_cpu_cycles.attr.attr,
+	&armv8_event_attr_br_pred.attr.attr,
+	&armv8_event_attr_mem_access.attr.attr,
+	&armv8_event_attr_l1i_cache.attr.attr,
+	&armv8_event_attr_l1d_cache_wb.attr.attr,
+	&armv8_event_attr_l2d_cache.attr.attr,
+	&armv8_event_attr_l2d_cache_refill.attr.attr,
+	&armv8_event_attr_l2d_cache_wb.attr.attr,
+	&armv8_event_attr_bus_access.attr.attr,
+	&armv8_event_attr_memory_error.attr.attr,
+	&armv8_event_attr_inst_spec.attr.attr,
+	&armv8_event_attr_ttbr_write_retired.attr.attr,
+	&armv8_event_attr_bus_cycles.attr.attr,
+	&armv8_event_attr_chain.attr.attr,
+	&armv8_event_attr_l1d_cache_allocate.attr.attr,
+	&armv8_event_attr_l2d_cache_allocate.attr.attr,
+	&armv8_event_attr_br_retired.attr.attr,
+	&armv8_event_attr_br_mis_pred_retired.attr.attr,
+	&armv8_event_attr_stall_frontend.attr.attr,
+	&armv8_event_attr_stall_backend.attr.attr,
+	&armv8_event_attr_l1d_tlb.attr.attr,
+	&armv8_event_attr_l1i_tlb.attr.attr,
+	&armv8_event_attr_l2i_cache.attr.attr,
+	&armv8_event_attr_l2i_cache_refill.attr.attr,
+	&armv8_event_attr_l3d_cache_allocate.attr.attr,
+	&armv8_event_attr_l3d_cache_refill.attr.attr,
+	&armv8_event_attr_l3d_cache.attr.attr,
+	&armv8_event_attr_l3d_cache_wb.attr.attr,
+	&armv8_event_attr_l2d_tlb_refill.attr.attr,
+	&armv8_event_attr_l21_tlb_refill.attr.attr,
+	&armv8_event_attr_l2d_tlb.attr.attr,
+	&armv8_event_attr_l21_tlb.attr.attr,
+	NULL,
+};
+
+static struct attribute_group armv8_pmuv3_events_attr_group = {
+	.name = "events",
+	.attrs = armv8_pmuv3_event_attrs,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-9");
+
+static struct attribute *armv8_pmuv3_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group armv8_pmuv3_format_attr_group = {
+	.name = "format",
+	.attrs = armv8_pmuv3_format_attrs,
+};
+
+static const struct attribute_group *armv8_pmuv3_attr_groups[] = {
+	&armv8_pmuv3_events_attr_group,
+	&armv8_pmuv3_format_attr_group,
+	NULL,
+};
 
 /*
  * Perf Events' indices
@@ -187,9 +385,6 @@ static const unsigned armv8_a57_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 #define	ARMV8_IDX_COUNTER_LAST(cpu_pmu) \
 	(ARMV8_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
 
-#define	ARMV8_MAX_COUNTERS	32
-#define	ARMV8_COUNTER_MASK	(ARMV8_MAX_COUNTERS - 1)
-
 /*
  * ARMv8 low level PMU access
  */
@@ -198,39 +393,7 @@ static const unsigned armv8_a57_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
  * Perf Event to low level counters mapping
  */
 #define	ARMV8_IDX_TO_COUNTER(x)	\
-	(((x) - ARMV8_IDX_COUNTER0) & ARMV8_COUNTER_MASK)
-
-/*
- * Per-CPU PMCR: config reg
- */
-#define ARMV8_PMCR_E		(1 << 0) /* Enable all counters */
-#define ARMV8_PMCR_P		(1 << 1) /* Reset all counters */
-#define ARMV8_PMCR_C		(1 << 2) /* Cycle counter reset */
-#define ARMV8_PMCR_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV8_PMCR_X		(1 << 4) /* Export to ETM */
-#define ARMV8_PMCR_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
-#define	ARMV8_PMCR_N_SHIFT	11	 /* Number of counters supported */
-#define	ARMV8_PMCR_N_MASK	0x1f
-#define	ARMV8_PMCR_MASK		0x3f	 /* Mask for writable bits */
-
-/*
- * PMOVSR: counters overflow flag status reg
- */
-#define	ARMV8_OVSR_MASK		0xffffffff	/* Mask for writable bits */
-#define	ARMV8_OVERFLOWED_MASK	ARMV8_OVSR_MASK
-
-/*
- * PMXEVTYPER: Event selection reg
- */
-#define	ARMV8_EVTYPE_MASK	0xc80003ff	/* Mask for writable bits */
-#define	ARMV8_EVTYPE_EVENT	0x3ff		/* Mask for EVENT bits */
-
-/*
- * Event filters for PMUv3
- */
-#define	ARMV8_EXCLUDE_EL1	(1 << 31)
-#define	ARMV8_EXCLUDE_EL0	(1 << 30)
-#define	ARMV8_INCLUDE_EL2	(1 << 27)
+	(((x) - ARMV8_IDX_COUNTER0) & ARMV8_PMU_COUNTER_MASK)
 
 static inline u32 armv8pmu_pmcr_read(void)
 {
@@ -241,14 +404,14 @@ static inline u32 armv8pmu_pmcr_read(void)
 
 static inline void armv8pmu_pmcr_write(u32 val)
 {
-	val &= ARMV8_PMCR_MASK;
+	val &= ARMV8_PMU_PMCR_MASK;
 	isb();
 	asm volatile("msr pmcr_el0, %0" :: "r" (val));
 }
 
 static inline int armv8pmu_has_overflowed(u32 pmovsr)
 {
-	return pmovsr & ARMV8_OVERFLOWED_MASK;
+	return pmovsr & ARMV8_PMU_OVERFLOWED_MASK;
 }
 
 static inline int armv8pmu_counter_valid(struct arm_pmu *cpu_pmu, int idx)
@@ -298,16 +461,23 @@ static inline void armv8pmu_write_counter(struct perf_event *event, u32 value)
 	if (!armv8pmu_counter_valid(cpu_pmu, idx))
 		pr_err("CPU%u writing wrong counter %d\n",
 			smp_processor_id(), idx);
-	else if (idx == ARMV8_IDX_CYCLE_COUNTER)
-		asm volatile("msr pmccntr_el0, %0" :: "r" (value));
-	else if (armv8pmu_select_counter(idx) == idx)
+	else if (idx == ARMV8_IDX_CYCLE_COUNTER) {
+		/*
+		 * Set the upper 32bits as this is a 64bit counter but we only
+		 * count using the lower 32bits and we want an interrupt when
+		 * it overflows.
+		 */
+		u64 value64 = 0xffffffff00000000ULL | value;
+
+		asm volatile("msr pmccntr_el0, %0" :: "r" (value64));
+	} else if (armv8pmu_select_counter(idx) == idx)
 		asm volatile("msr pmxevcntr_el0, %0" :: "r" (value));
 }
 
 static inline void armv8pmu_write_evtype(int idx, u32 val)
 {
 	if (armv8pmu_select_counter(idx) == idx) {
-		val &= ARMV8_EVTYPE_MASK;
+		val &= ARMV8_PMU_EVTYPE_MASK;
 		asm volatile("msr pmxevtyper_el0, %0" :: "r" (val));
 	}
 }
@@ -353,7 +523,7 @@ static inline u32 armv8pmu_getreset_flags(void)
 	asm volatile("mrs %0, pmovsclr_el0" : "=r" (value));
 
 	/* Write to clear flags */
-	value &= ARMV8_OVSR_MASK;
+	value &= ARMV8_PMU_OVSR_MASK;
 	asm volatile("msr pmovsclr_el0, %0" :: "r" (value));
 
 	return value;
@@ -491,7 +661,7 @@ static void armv8pmu_start(struct arm_pmu *cpu_pmu)
 
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	/* Enable all counters */
-	armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMCR_E);
+	armv8pmu_pmcr_write(armv8pmu_pmcr_read() | ARMV8_PMU_PMCR_E);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
@@ -502,7 +672,7 @@ static void armv8pmu_stop(struct arm_pmu *cpu_pmu)
 
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	/* Disable all counters */
-	armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMCR_E);
+	armv8pmu_pmcr_write(armv8pmu_pmcr_read() & ~ARMV8_PMU_PMCR_E);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
@@ -512,7 +682,7 @@ static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
 	int idx;
 	struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
 	struct hw_perf_event *hwc = &event->hw;
-	unsigned long evtype = hwc->config_base & ARMV8_EVTYPE_EVENT;
+	unsigned long evtype = hwc->config_base & ARMV8_PMU_EVTYPE_EVENT;
 
 	/* Always place a cycle counter into the cycle counter. */
 	if (evtype == ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES) {
@@ -545,12 +715,15 @@ static int armv8pmu_set_event_filter(struct hw_perf_event *event,
 
 	if (attr->exclude_idle)
 		return -EPERM;
+	if (is_kernel_in_hyp_mode() &&
+	    attr->exclude_kernel != attr->exclude_hv)
+		return -EINVAL;
 	if (attr->exclude_user)
-		config_base |= ARMV8_EXCLUDE_EL0;
-	if (attr->exclude_kernel)
-		config_base |= ARMV8_EXCLUDE_EL1;
+		config_base |= ARMV8_PMU_EXCLUDE_EL0;
+	if (!is_kernel_in_hyp_mode() && attr->exclude_kernel)
+		config_base |= ARMV8_PMU_EXCLUDE_EL1;
 	if (!attr->exclude_hv)
-		config_base |= ARMV8_INCLUDE_EL2;
+		config_base |= ARMV8_PMU_INCLUDE_EL2;
 
 	/*
 	 * Install the filter into config_base as this is used to
@@ -572,32 +745,40 @@ static void armv8pmu_reset(void *info)
 		armv8pmu_disable_intens(idx);
 	}
 
-	/* Initialize & Reset PMNC: C and P bits. */
-	armv8pmu_pmcr_write(ARMV8_PMCR_P | ARMV8_PMCR_C);
-
-	/* Disable access from userspace. */
-	asm volatile("msr pmuserenr_el0, %0" :: "r" (0));
+	/*
+	 * Initialize & Reset PMNC. Request overflow interrupt for
+	 * 64 bit cycle counter but cheat in armv8pmu_write_counter().
+	 */
+	armv8pmu_pmcr_write(ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C |
+			    ARMV8_PMU_PMCR_LC);
 }
 
 static int armv8_pmuv3_map_event(struct perf_event *event)
 {
 	return armpmu_map_event(event, &armv8_pmuv3_perf_map,
 				&armv8_pmuv3_perf_cache_map,
-				ARMV8_EVTYPE_EVENT);
+				ARMV8_PMU_EVTYPE_EVENT);
 }
 
 static int armv8_a53_map_event(struct perf_event *event)
 {
 	return armpmu_map_event(event, &armv8_a53_perf_map,
 				&armv8_a53_perf_cache_map,
-				ARMV8_EVTYPE_EVENT);
+				ARMV8_PMU_EVTYPE_EVENT);
 }
 
 static int armv8_a57_map_event(struct perf_event *event)
 {
 	return armpmu_map_event(event, &armv8_a57_perf_map,
 				&armv8_a57_perf_cache_map,
-				ARMV8_EVTYPE_EVENT);
+				ARMV8_PMU_EVTYPE_EVENT);
+}
+
+static int armv8_thunder_map_event(struct perf_event *event)
+{
+	return armpmu_map_event(event, &armv8_thunder_perf_map,
+				&armv8_thunder_perf_cache_map,
+				ARMV8_PMU_EVTYPE_EVENT);
 }
 
 static void armv8pmu_read_num_pmnc_events(void *info)
@@ -605,7 +786,7 @@ static void armv8pmu_read_num_pmnc_events(void *info)
 	int *nb_cnt = info;
 
 	/* Read the nb of CNTx counters supported from PMNC */
-	*nb_cnt = (armv8pmu_pmcr_read() >> ARMV8_PMCR_N_SHIFT) & ARMV8_PMCR_N_MASK;
+	*nb_cnt = (armv8pmu_pmcr_read() >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
 
 	/* Add the CPU cycles counter */
 	*nb_cnt += 1;
@@ -646,6 +827,7 @@ static int armv8_a53_pmu_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_cortex_a53";
 	cpu_pmu->map_event		= armv8_a53_map_event;
+	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
 	return armv8pmu_probe_num_events(cpu_pmu);
 }
 
@@ -654,6 +836,25 @@ static int armv8_a57_pmu_init(struct arm_pmu *cpu_pmu)
 	armv8_pmu_init(cpu_pmu);
 	cpu_pmu->name			= "armv8_cortex_a57";
 	cpu_pmu->map_event		= armv8_a57_map_event;
+	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	return armv8pmu_probe_num_events(cpu_pmu);
+}
+
+static int armv8_a72_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	armv8_pmu_init(cpu_pmu);
+	cpu_pmu->name			= "armv8_cortex_a72";
+	cpu_pmu->map_event		= armv8_a57_map_event;
+	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
+	return armv8pmu_probe_num_events(cpu_pmu);
+}
+
+static int armv8_thunder_pmu_init(struct arm_pmu *cpu_pmu)
+{
+	armv8_pmu_init(cpu_pmu);
+	cpu_pmu->name			= "armv8_cavium_thunder";
+	cpu_pmu->map_event		= armv8_thunder_map_event;
+	cpu_pmu->pmu.attr_groups	= armv8_pmuv3_attr_groups;
 	return armv8pmu_probe_num_events(cpu_pmu);
 }
 
@@ -661,6 +862,8 @@ static const struct of_device_id armv8_pmu_of_device_ids[] = {
 	{.compatible = "arm,armv8-pmuv3",	.data = armv8_pmuv3_init},
 	{.compatible = "arm,cortex-a53-pmu",	.data = armv8_a53_pmu_init},
 	{.compatible = "arm,cortex-a57-pmu",	.data = armv8_a57_pmu_init},
+	{.compatible = "arm,cortex-a72-pmu",	.data = armv8_a72_pmu_init},
+	{.compatible = "cavium,thunder-pmu",	.data = armv8_thunder_pmu_init},
 	{},
 };
 
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index f75b540bc3b4..80624829db61 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -46,6 +46,7 @@
 #include <linux/notifier.h>
 #include <trace/events/power.h>
 
+#include <asm/alternative.h>
 #include <asm/compat.h>
 #include <asm/cacheflush.h>
 #include <asm/fpsimd.h>
@@ -280,6 +281,9 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	} else {
 		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->pstate = PSR_MODE_EL1h;
+		if (IS_ENABLED(CONFIG_ARM64_UAO) &&
+		    cpus_have_cap(ARM64_HAS_UAO))
+			childregs->pstate |= PSR_UAO_BIT;
 		p->thread.cpu_context.x19 = stack_start;
 		p->thread.cpu_context.x20 = stk_sz;
 	}
@@ -308,6 +312,17 @@ static void tls_thread_switch(struct task_struct *next)
 	: : "r" (tpidr), "r" (tpidrro));
 }
 
+/* Restore the UAO state depending on next's addr_limit */
+static void uao_thread_switch(struct task_struct *next)
+{
+	if (IS_ENABLED(CONFIG_ARM64_UAO)) {
+		if (task_thread_info(next)->addr_limit == KERNEL_DS)
+			asm(ALTERNATIVE("nop", SET_PSTATE_UAO(1), ARM64_HAS_UAO));
+		else
+			asm(ALTERNATIVE("nop", SET_PSTATE_UAO(0), ARM64_HAS_UAO));
+	}
+}
+
 /*
  * Thread switching.
  */
@@ -320,6 +335,7 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	tls_thread_switch(next);
 	hw_breakpoint_thread_switch(next);
 	contextidr_thread_switch(next);
+	uao_thread_switch(next);
 
 	/*
 	 * Complete any pending TLB or cache maintenance on this CPU in case
@@ -344,11 +360,14 @@ unsigned long get_wchan(struct task_struct *p)
 	frame.fp = thread_saved_fp(p);
 	frame.sp = thread_saved_sp(p);
 	frame.pc = thread_saved_pc(p);
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	frame.graph = p->curr_ret_stack;
+#endif
 	stack_page = (unsigned long)task_stack_page(p);
 	do {
 		if (frame.sp < stack_page ||
 		    frame.sp >= stack_page + THREAD_SIZE ||
-		    unwind_frame(&frame))
+		    unwind_frame(p, &frame))
 			return 0;
 		if (!in_sched_functions(frame.pc))
 			return frame.pc;
diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c
index aa94a88f6279..42816bebb1e0 100644
--- a/arch/arm64/kernel/psci.c
+++ b/arch/arm64/kernel/psci.c
@@ -20,7 +20,6 @@
 #include <linux/smp.h>
 #include <linux/delay.h>
 #include <linux/psci.h>
-#include <linux/slab.h>
 
 #include <uapi/linux/psci.h>
 
@@ -28,87 +27,6 @@
 #include <asm/cpu_ops.h>
 #include <asm/errno.h>
 #include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-static bool psci_power_state_loses_context(u32 state)
-{
-	return state & PSCI_0_2_POWER_STATE_TYPE_MASK;
-}
-
-static bool psci_power_state_is_valid(u32 state)
-{
-	const u32 valid_mask = PSCI_0_2_POWER_STATE_ID_MASK |
-			       PSCI_0_2_POWER_STATE_TYPE_MASK |
-			       PSCI_0_2_POWER_STATE_AFFL_MASK;
-
-	return !(state & ~valid_mask);
-}
-
-static DEFINE_PER_CPU_READ_MOSTLY(u32 *, psci_power_state);
-
-static int __maybe_unused cpu_psci_cpu_init_idle(unsigned int cpu)
-{
-	int i, ret, count = 0;
-	u32 *psci_states;
-	struct device_node *state_node, *cpu_node;
-
-	cpu_node = of_get_cpu_node(cpu, NULL);
-	if (!cpu_node)
-		return -ENODEV;
-
-	/*
-	 * If the PSCI cpu_suspend function hook has not been initialized
-	 * idle states must not be enabled, so bail out
-	 */
-	if (!psci_ops.cpu_suspend)
-		return -EOPNOTSUPP;
-
-	/* Count idle states */
-	while ((state_node = of_parse_phandle(cpu_node, "cpu-idle-states",
-					      count))) {
-		count++;
-		of_node_put(state_node);
-	}
-
-	if (!count)
-		return -ENODEV;
-
-	psci_states = kcalloc(count, sizeof(*psci_states), GFP_KERNEL);
-	if (!psci_states)
-		return -ENOMEM;
-
-	for (i = 0; i < count; i++) {
-		u32 state;
-
-		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
-
-		ret = of_property_read_u32(state_node,
-					   "arm,psci-suspend-param",
-					   &state);
-		if (ret) {
-			pr_warn(" * %s missing arm,psci-suspend-param property\n",
-				state_node->full_name);
-			of_node_put(state_node);
-			goto free_mem;
-		}
-
-		of_node_put(state_node);
-		pr_debug("psci-power-state %#x index %d\n", state, i);
-		if (!psci_power_state_is_valid(state)) {
-			pr_warn("Invalid PSCI power state %#x\n", state);
-			ret = -EINVAL;
-			goto free_mem;
-		}
-		psci_states[i] = state;
-	}
-	/* Idle states parsed correctly, initialize per-cpu pointer */
-	per_cpu(psci_power_state, cpu) = psci_states;
-	return 0;
-
-free_mem:
-	kfree(psci_states);
-	return ret;
-}
 
 static int __init cpu_psci_cpu_init(unsigned int cpu)
 {
@@ -192,38 +110,11 @@ static int cpu_psci_cpu_kill(unsigned int cpu)
 }
 #endif
 
-static int psci_suspend_finisher(unsigned long index)
-{
-	u32 *state = __this_cpu_read(psci_power_state);
-
-	return psci_ops.cpu_suspend(state[index - 1],
-				    virt_to_phys(cpu_resume));
-}
-
-static int __maybe_unused cpu_psci_cpu_suspend(unsigned long index)
-{
-	int ret;
-	u32 *state = __this_cpu_read(psci_power_state);
-	/*
-	 * idle state index 0 corresponds to wfi, should never be called
-	 * from the cpu_suspend operations
-	 */
-	if (WARN_ON_ONCE(!index))
-		return -EINVAL;
-
-	if (!psci_power_state_loses_context(state[index - 1]))
-		ret = psci_ops.cpu_suspend(state[index - 1], 0);
-	else
-		ret = cpu_suspend(index, psci_suspend_finisher);
-
-	return ret;
-}
-
 const struct cpu_operations cpu_psci_ops = {
 	.name		= "psci",
 #ifdef CONFIG_CPU_IDLE
-	.cpu_init_idle	= cpu_psci_cpu_init_idle,
-	.cpu_suspend	= cpu_psci_cpu_suspend,
+	.cpu_init_idle	= psci_cpu_init_idle,
+	.cpu_suspend	= psci_cpu_suspend_enter,
 #endif
 	.cpu_init	= cpu_psci_cpu_init,
 	.cpu_prepare	= cpu_psci_cpu_prepare,
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 1971f491bb90..3f6cd5c5234f 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -58,6 +58,12 @@
  */
 void ptrace_disable(struct task_struct *child)
 {
+	/*
+	 * This would be better off in core code, but PTRACE_DETACH has
+	 * grown its fair share of arch-specific worts and changing it
+	 * is likely to cause regressions on obscure architectures.
+	 */
+	user_disable_single_step(child);
 }
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
@@ -494,7 +500,7 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
 	if (ret)
 		return ret;
 
-	if (!valid_user_regs(&newregs))
+	if (!valid_user_regs(&newregs, target))
 		return -EINVAL;
 
 	task_pt_regs(target)->user_regs = newregs;
@@ -764,7 +770,7 @@ static int compat_gpr_set(struct task_struct *target,
 
 	}
 
-	if (valid_user_regs(&newregs.user_regs))
+	if (valid_user_regs(&newregs.user_regs, target))
 		*task_pt_regs(target) = newregs;
 	else
 		ret = -EINVAL;
@@ -1266,3 +1272,79 @@ asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
 }
+
+/*
+ * Bits which are always architecturally RES0 per ARM DDI 0487A.h
+ * Userspace cannot use these until they have an architectural meaning.
+ * We also reserve IL for the kernel; SS is handled dynamically.
+ */
+#define SPSR_EL1_AARCH64_RES0_BITS \
+	(GENMASK_ULL(63,32) | GENMASK_ULL(27, 22) | GENMASK_ULL(20, 10) | \
+	 GENMASK_ULL(5, 5))
+#define SPSR_EL1_AARCH32_RES0_BITS \
+	(GENMASK_ULL(63,32) | GENMASK_ULL(24, 22) | GENMASK_ULL(20,20))
+
+static int valid_compat_regs(struct user_pt_regs *regs)
+{
+	regs->pstate &= ~SPSR_EL1_AARCH32_RES0_BITS;
+
+	if (!system_supports_mixed_endian_el0()) {
+		if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+			regs->pstate |= COMPAT_PSR_E_BIT;
+		else
+			regs->pstate &= ~COMPAT_PSR_E_BIT;
+	}
+
+	if (user_mode(regs) && (regs->pstate & PSR_MODE32_BIT) &&
+	    (regs->pstate & COMPAT_PSR_A_BIT) == 0 &&
+	    (regs->pstate & COMPAT_PSR_I_BIT) == 0 &&
+	    (regs->pstate & COMPAT_PSR_F_BIT) == 0) {
+		return 1;
+	}
+
+	/*
+	 * Force PSR to a valid 32-bit EL0t, preserving the same bits as
+	 * arch/arm.
+	 */
+	regs->pstate &= COMPAT_PSR_N_BIT | COMPAT_PSR_Z_BIT |
+			COMPAT_PSR_C_BIT | COMPAT_PSR_V_BIT |
+			COMPAT_PSR_Q_BIT | COMPAT_PSR_IT_MASK |
+			COMPAT_PSR_GE_MASK | COMPAT_PSR_E_BIT |
+			COMPAT_PSR_T_BIT;
+	regs->pstate |= PSR_MODE32_BIT;
+
+	return 0;
+}
+
+static int valid_native_regs(struct user_pt_regs *regs)
+{
+	regs->pstate &= ~SPSR_EL1_AARCH64_RES0_BITS;
+
+	if (user_mode(regs) && !(regs->pstate & PSR_MODE32_BIT) &&
+	    (regs->pstate & PSR_D_BIT) == 0 &&
+	    (regs->pstate & PSR_A_BIT) == 0 &&
+	    (regs->pstate & PSR_I_BIT) == 0 &&
+	    (regs->pstate & PSR_F_BIT) == 0) {
+		return 1;
+	}
+
+	/* Force PSR to a valid 64-bit EL0t */
+	regs->pstate &= PSR_N_BIT | PSR_Z_BIT | PSR_C_BIT | PSR_V_BIT;
+
+	return 0;
+}
+
+/*
+ * Are the current registers suitable for user mode? (used to maintain
+ * security in signal handlers)
+ */
+int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task)
+{
+	if (!test_tsk_thread_flag(task, TIF_SINGLESTEP))
+		regs->pstate &= ~DBG_SPSR_SS;
+
+	if (is_compat_thread(task_thread_info(task)))
+		return valid_compat_regs(regs);
+	else
+		return valid_native_regs(regs);
+}
diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c
index 6c4fd2810ecb..1718706fde83 100644
--- a/arch/arm64/kernel/return_address.c
+++ b/arch/arm64/kernel/return_address.c
@@ -43,8 +43,11 @@ void *return_address(unsigned int level)
 	frame.fp = (unsigned long)__builtin_frame_address(0);
 	frame.sp = current_stack_pointer;
 	frame.pc = (unsigned long)return_address; /* dummy */
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	frame.graph = current->curr_ret_stack;
+#endif
 
-	walk_stackframe(&frame, save_return_addr, &data);
+	walk_stackframe(current, &frame, save_return_addr, &data);
 
 	if (!data.level)
 		return data.addr;
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 8119479147db..9dc67769b6a4 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -62,6 +62,7 @@
 #include <asm/memblock.h>
 #include <asm/efi.h>
 #include <asm/xen/hypervisor.h>
+#include <asm/mmu_context.h>
 
 phys_addr_t __fdt_pointer __initdata;
 
@@ -73,13 +74,13 @@ static struct resource mem_res[] = {
 		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	},
 	{
 		.name = "Kernel data",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	}
 };
 
@@ -210,7 +211,7 @@ static void __init request_standard_resources(void)
 		res->name  = "System RAM";
 		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
 		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
 
@@ -313,6 +314,12 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	local_async_enable();
 
+	/*
+	 * TTBR0 is only used for the identity mapping at this stage. Make it
+	 * point to zero page to avoid speculatively fetching new entries.
+	 */
+	cpu_uninstall_idmap();
+
 	efi_init();
 	arm64_memblock_init();
 
@@ -381,3 +388,32 @@ static int __init topology_init(void)
 	return 0;
 }
 subsys_initcall(topology_init);
+
+/*
+ * Dump out kernel offset information on panic.
+ */
+static int dump_kernel_offset(struct notifier_block *self, unsigned long v,
+			      void *p)
+{
+	u64 const kaslr_offset = kimage_vaddr - KIMAGE_VADDR;
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && kaslr_offset > 0) {
+		pr_emerg("Kernel Offset: 0x%llx from 0x%lx\n",
+			 kaslr_offset, KIMAGE_VADDR);
+	} else {
+		pr_emerg("Kernel Offset: disabled\n");
+	}
+	return 0;
+}
+
+static struct notifier_block kernel_offset_notifier = {
+	.notifier_call = dump_kernel_offset
+};
+
+static int __init register_kernel_offset_dumper(void)
+{
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &kernel_offset_notifier);
+	return 0;
+}
+__initcall(register_kernel_offset_dumper);
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index e18c48cb6db1..a8eafdbc7cb8 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -115,7 +115,7 @@ static int restore_sigframe(struct pt_regs *regs,
 	 */
 	regs->syscallno = ~0UL;
 
-	err |= !valid_user_regs(&regs->user_regs);
+	err |= !valid_user_regs(&regs->user_regs, current);
 
 	if (err == 0) {
 		struct fpsimd_context *fpsimd_ctx =
@@ -307,7 +307,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	/*
 	 * Check that the resulting registers are actually sane.
 	 */
-	ret |= !valid_user_regs(&regs->user_regs);
+	ret |= !valid_user_regs(&regs->user_regs, current);
 
 	/*
 	 * Fast forward the stepping logic so we step into the signal
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index 71ef6dc89ae5..b7063de792f7 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -166,7 +166,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
 #ifdef BUS_MCEERR_AO
 		/*
 		 * Other callers might not initialize the si_lsb field,
-		 * so check explicitely for the right codes here.
+		 * so check explicitly for the right codes here.
 		 */
 		if (from->si_signo == SIGBUS &&
 		    (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO))
@@ -356,7 +356,7 @@ static int compat_restore_sigframe(struct pt_regs *regs,
 	 */
 	regs->syscallno = ~0UL;
 
-	err |= !valid_user_regs(&regs->user_regs);
+	err |= !valid_user_regs(&regs->user_regs, current);
 
 	aux = (struct compat_aux_sigframe __user *) sf->uc.uc_regspace;
 	if (err == 0)
diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
index f586f7c875e2..fd10eb663868 100644
--- a/arch/arm64/kernel/sleep.S
+++ b/arch/arm64/kernel/sleep.S
@@ -145,6 +145,10 @@ ENTRY(cpu_resume_mmu)
 ENDPROC(cpu_resume_mmu)
 	.popsection
 cpu_resume_after_mmu:
+#ifdef CONFIG_KASAN
+	mov	x0, sp
+	bl	kasan_unpoison_remaining_stack
+#endif
 	mov	x0, #0			// return zero on success
 	ldp	x19, x20, [sp, #16]
 	ldp	x21, x22, [sp, #32]
@@ -173,6 +177,9 @@ ENTRY(cpu_resume)
 	/* load physical address of identity map page table in x1 */
 	adrp	x1, idmap_pg_dir
 	mov	sp, x2
+	/* save thread_info */
+	and	x2, x2, #~(THREAD_SIZE - 1)
+	msr	sp_el0, x2
 	/*
 	 * cpu_do_resume expects x0 to contain context physical address
 	 * pointer and x1 to contain physical address of 1:1 page tables
diff --git a/arch/arm64/kernel/smccc-call.S b/arch/arm64/kernel/smccc-call.S
new file mode 100644
index 000000000000..ae0496fa4235
--- /dev/null
+++ b/arch/arm64/kernel/smccc-call.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License Version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+
+	.macro SMCCC instr
+	.cfi_startproc
+	\instr	#0
+	ldr	x4, [sp]
+	stp	x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
+	stp	x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
+	ret
+	.cfi_endproc
+	.endm
+
+/*
+ * void arm_smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ */
+ENTRY(arm_smccc_smc)
+	SMCCC	smc
+ENDPROC(arm_smccc_smc)
+
+/*
+ * void arm_smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
+ *		  unsigned long a3, unsigned long a4, unsigned long a5,
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ */
+ENTRY(arm_smccc_hvc)
+	SMCCC	hvc
+ENDPROC(arm_smccc_hvc)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 2bbdc0e4fd14..b2d5f4ee9a1c 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -63,6 +63,8 @@
  * where to place its SVC stack
  */
 struct secondary_data secondary_data;
+/* Number of CPUs which aren't online, but looping in kernel text. */
+int cpus_stuck_in_kernel;
 
 enum ipi_msg_type {
 	IPI_RESCHEDULE,
@@ -70,8 +72,19 @@ enum ipi_msg_type {
 	IPI_CPU_STOP,
 	IPI_TIMER,
 	IPI_IRQ_WORK,
+	IPI_WAKEUP
 };
 
+#ifdef CONFIG_HOTPLUG_CPU
+static int op_cpu_kill(unsigned int cpu);
+#else
+static inline int op_cpu_kill(unsigned int cpu)
+{
+	return -ENOSYS;
+}
+#endif
+
+
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
  * This also gives us the initial stack to use for this CPU.
@@ -89,12 +102,14 @@ static DECLARE_COMPLETION(cpu_running);
 int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
+	long status;
 
 	/*
 	 * We need to tell the secondary core where to find its stack and the
 	 * page tables.
 	 */
 	secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
+	update_cpu_boot_status(CPU_MMU_OFF);
 	__flush_dcache_area(&secondary_data, sizeof(secondary_data));
 
 	/*
@@ -118,6 +133,32 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	}
 
 	secondary_data.stack = NULL;
+	status = READ_ONCE(secondary_data.status);
+	if (ret && status) {
+
+		if (status == CPU_MMU_OFF)
+			status = READ_ONCE(__early_cpu_boot_status);
+
+		switch (status) {
+		default:
+			pr_err("CPU%u: failed in unknown state : 0x%lx\n",
+					cpu, status);
+			break;
+		case CPU_KILL_ME:
+			if (!op_cpu_kill(cpu)) {
+				pr_crit("CPU%u: died during early boot\n", cpu);
+				break;
+			}
+			/* Fall through */
+			pr_crit("CPU%u: may not have shut down cleanly\n", cpu);
+		case CPU_STUCK_IN_KERNEL:
+			pr_crit("CPU%u: is stuck in kernel\n", cpu);
+			cpus_stuck_in_kernel++;
+			break;
+		case CPU_PANIC_KERNEL:
+			panic("CPU%u detected unsupported configuration\n", cpu);
+		}
+	}
 
 	return ret;
 }
@@ -149,9 +190,7 @@ asmlinkage void secondary_start_kernel(void)
 	 * TTBR0 is only used for the identity mapping at this stage. Make it
 	 * point to zero page to avoid speculatively fetching new entries.
 	 */
-	cpu_set_reserved_ttbr0();
-	local_flush_tlb_all();
-	cpu_set_default_tcr_t0sz();
+	cpu_uninstall_idmap();
 
 	preempt_disable();
 	trace_hardirqs_off();
@@ -185,6 +224,9 @@ asmlinkage void secondary_start_kernel(void)
 	 */
 	pr_info("CPU%u: Booted secondary processor [%08x]\n",
 					 cpu, read_cpuid_id());
+	update_cpu_boot_status(CPU_BOOT_SUCCESS);
+	/* Make sure the status update is visible before we complete */
+	smp_wmb();
 	set_cpu_online(cpu, true);
 	complete(&cpu_running);
 
@@ -195,7 +237,7 @@ asmlinkage void secondary_start_kernel(void)
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -313,6 +355,30 @@ void cpu_die(void)
 }
 #endif
 
+/*
+ * Kill the calling secondary CPU, early in bringup before it is turned
+ * online.
+ */
+void cpu_die_early(void)
+{
+	int cpu = smp_processor_id();
+
+	pr_crit("CPU%d: will not boot\n", cpu);
+
+	/* Mark this CPU absent */
+	set_cpu_present(cpu, 0);
+
+#ifdef CONFIG_HOTPLUG_CPU
+	update_cpu_boot_status(CPU_KILL_ME);
+	/* Check if we can park ourselves */
+	if (cpu_ops[cpu] && cpu_ops[cpu]->cpu_die)
+		cpu_ops[cpu]->cpu_die(cpu);
+#endif
+	update_cpu_boot_status(CPU_STUCK_IN_KERNEL);
+
+	cpu_park_loop();
+}
+
 static void __init hyp_mode_check(void)
 {
 	if (is_hyp_mode_available())
@@ -445,6 +511,17 @@ acpi_map_gic_cpu_interface(struct acpi_madt_generic_interrupt *processor)
 	/* map the logical cpu id to cpu MPIDR */
 	cpu_logical_map(cpu_count) = hwid;
 
+	/*
+	 * Set-up the ACPI parking protocol cpu entries
+	 * while initializing the cpu_logical_map to
+	 * avoid parsing MADT entries multiple times for
+	 * nothing (ie a valid cpu_logical_map entry should
+	 * contain a valid parking protocol data set to
+	 * initialize the cpu if the parking protocol is
+	 * the only available enable method).
+	 */
+	acpi_set_mailbox_entry(cpu_count, processor);
+
 	cpu_count++;
 }
 
@@ -473,7 +550,7 @@ acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
  * cpu logical map array containing MPIDR values related to logical
  * cpus. Assumes that cpu_logical_map(0) has already been initialized.
  */
-void __init of_parse_and_init_cpus(void)
+static void __init of_parse_and_init_cpus(void)
 {
 	struct device_node *dn = NULL;
 
@@ -627,6 +704,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 	S(IPI_CPU_STOP, "CPU stop interrupts"),
 	S(IPI_TIMER, "Timer broadcast interrupts"),
 	S(IPI_IRQ_WORK, "IRQ work interrupts"),
+	S(IPI_WAKEUP, "CPU wake-up interrupts"),
 };
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
@@ -670,6 +748,13 @@ void arch_send_call_function_single_ipi(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC);
 }
 
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
+{
+	smp_cross_call(mask, IPI_WAKEUP);
+}
+#endif
+
 #ifdef CONFIG_IRQ_WORK
 void arch_irq_work_raise(void)
 {
@@ -747,6 +832,14 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		break;
 #endif
 
+#ifdef CONFIG_ARM64_ACPI_PARKING_PROTOCOL
+	case IPI_WAKEUP:
+		WARN_ONCE(!acpi_parking_protocol_valid(cpu),
+			  "CPU%u: Wake-up IPI outside the ACPI parking protocol\n",
+			  cpu);
+		break;
+#endif
+
 	default:
 		pr_crit("CPU%u: Unknown IPI message 0x%x\n", cpu, ipinr);
 		break;
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index ccb6078ed9f2..d9751a4769e7 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -17,9 +17,11 @@
  */
 #include <linux/kernel.h>
 #include <linux/export.h>
+#include <linux/ftrace.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 
+#include <asm/irq.h>
 #include <asm/stacktrace.h>
 
 /*
@@ -35,25 +37,82 @@
  *	ldp	x29, x30, [sp]
  *	add	sp, sp, #0x10
  */
-int notrace unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
+	unsigned long irq_stack_ptr;
+
+	/*
+	 * Switching between stacks is valid when tracing current and in
+	 * non-preemptible context.
+	 */
+	if (tsk == current && !preemptible())
+		irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
+	else
+		irq_stack_ptr = 0;
 
 	low  = frame->sp;
-	high = ALIGN(low, THREAD_SIZE);
+	/* irq stacks are not THREAD_SIZE aligned */
+	if (on_irq_stack(frame->sp, raw_smp_processor_id()))
+		high = irq_stack_ptr;
+	else
+		high = ALIGN(low, THREAD_SIZE) - 0x20;
 
-	if (fp < low || fp > high - 0x18 || fp & 0xf)
+	if (fp < low || fp > high || fp & 0xf)
 		return -EINVAL;
 
 	frame->sp = fp + 0x10;
-	frame->fp = *(unsigned long *)(fp);
-	frame->pc = *(unsigned long *)(fp + 8);
+	frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp));
+	frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8));
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	if (tsk && tsk->ret_stack &&
+			(frame->pc == (unsigned long)return_to_handler)) {
+		/*
+		 * This is a case where function graph tracer has
+		 * modified a return address (LR) in a stack frame
+		 * to hook a function return.
+		 * So replace it to an original value.
+		 */
+		frame->pc = tsk->ret_stack[frame->graph--].ret;
+	}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
+
+	/*
+	 * Check whether we are going to walk through from interrupt stack
+	 * to task stack.
+	 * If we reach the end of the stack - and its an interrupt stack,
+	 * unpack the dummy frame to find the original elr.
+	 *
+	 * Check the frame->fp we read from the bottom of the irq_stack,
+	 * and the original task stack pointer are both in current->stack.
+	 */
+	if (frame->sp == irq_stack_ptr) {
+		struct pt_regs *irq_args;
+		unsigned long orig_sp = IRQ_STACK_TO_TASK_STACK(irq_stack_ptr);
+
+		if (object_is_on_stack((void *)orig_sp) &&
+		   object_is_on_stack((void *)frame->fp)) {
+			frame->sp = orig_sp;
+
+			/* orig_sp is the saved pt_regs, find the elr */
+			irq_args = (struct pt_regs *)orig_sp;
+			frame->pc = irq_args->pc;
+		} else {
+			/*
+			 * This frame has a non-standard format, and we
+			 * didn't fix it, because the data looked wrong.
+			 * Refuse to output this frame.
+			 */
+			return -EINVAL;
+		}
+	}
 
 	return 0;
 }
 
-void notrace walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame,
 		     int (*fn)(struct stackframe *, void *), void *data)
 {
 	while (1) {
@@ -61,7 +120,7 @@ void notrace walk_stackframe(struct stackframe *frame,
 
 		if (fn(frame, data))
 			break;
-		ret = unwind_frame(frame);
+		ret = unwind_frame(tsk, frame);
 		if (ret < 0)
 			break;
 	}
@@ -112,8 +171,11 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		frame.sp = current_stack_pointer;
 		frame.pc = (unsigned long)save_stack_trace_tsk;
 	}
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	frame.graph = tsk->curr_ret_stack;
+#endif
 
-	walk_stackframe(&frame, save_trace, &data);
+	walk_stackframe(tsk, &frame, save_trace, &data);
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c
index 40f7b33a22da..66055392f445 100644
--- a/arch/arm64/kernel/suspend.c
+++ b/arch/arm64/kernel/suspend.c
@@ -1,3 +1,4 @@
+#include <linux/ftrace.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
 #include <asm/cacheflush.h>
@@ -41,7 +42,7 @@ void notrace __cpu_suspend_save(struct cpu_suspend_ctx *ptr,
  * time the notifier runs debug exceptions might have been enabled already,
  * with HW breakpoints registers content still in an unknown state.
  */
-void (*hw_breakpoint_restore)(void *);
+static void (*hw_breakpoint_restore)(void *);
 void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *))
 {
 	/* Prevent multiple restore hook initializations */
@@ -59,7 +60,6 @@ void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *))
  */
 int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 {
-	struct mm_struct *mm = current->active_mm;
 	int ret;
 	unsigned long flags;
 
@@ -71,6 +71,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	local_dbg_save(flags);
 
 	/*
+	 * Function graph tracer state gets incosistent when the kernel
+	 * calls functions that never return (aka suspend finishers) hence
+	 * disable graph tracing during their execution.
+	 */
+	pause_graph_tracing();
+
+	/*
 	 * mm context saved on the stack, it will be restored when
 	 * the cpu comes out of reset through the identity mapped
 	 * page tables, so that the thread address space is properly
@@ -79,22 +86,11 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	ret = __cpu_suspend_enter(arg, fn);
 	if (ret == 0) {
 		/*
-		 * We are resuming from reset with TTBR0_EL1 set to the
-		 * idmap to enable the MMU; set the TTBR0 to the reserved
-		 * page tables to prevent speculative TLB allocations, flush
-		 * the local tlb and set the default tcr_el1.t0sz so that
-		 * the TTBR0 address space set-up is properly restored.
-		 * If the current active_mm != &init_mm we entered cpu_suspend
-		 * with mappings in TTBR0 that must be restored, so we switch
-		 * them back to complete the address space configuration
-		 * restoration before returning.
+		 * We are resuming from reset with the idmap active in TTBR0_EL1.
+		 * We must uninstall the idmap and restore the expected MMU
+		 * state before we can possibly return to userspace.
 		 */
-		cpu_set_reserved_ttbr0();
-		local_flush_tlb_all();
-		cpu_set_default_tcr_t0sz();
-
-		if (mm != &init_mm)
-			cpu_switch_mm(mm->pgd, mm);
+		cpu_uninstall_idmap();
 
 		/*
 		 * Restore per-cpu offset before any kernel
@@ -111,6 +107,8 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 			hw_breakpoint_restore(NULL);
 	}
 
+	unpause_graph_tracing();
+
 	/*
 	 * Restore pstate flags. OS lock and mdscr have been already
 	 * restored, so from this point onwards, debugging is fully
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
index 13339b6ffc1a..59779699a1a4 100644
--- a/arch/arm64/kernel/time.c
+++ b/arch/arm64/kernel/time.c
@@ -52,8 +52,11 @@ unsigned long profile_pc(struct pt_regs *regs)
 	frame.fp = regs->regs[29];
 	frame.sp = regs->sp;
 	frame.pc = regs->pc;
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	frame.graph = -1; /* no task info */
+#endif
 	do {
-		int ret = unwind_frame(&frame);
+		int ret = unwind_frame(NULL, &frame);
 		if (ret < 0)
 			return 0;
 	} while (in_lock_functions(frame.pc));
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index e9b9b5364393..c5392081b49b 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -146,17 +146,24 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
 static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 {
 	struct stackframe frame;
+	unsigned long irq_stack_ptr;
+	int skip;
+
+	/*
+	 * Switching between stacks is valid when tracing current and in
+	 * non-preemptible context.
+	 */
+	if (tsk == current && !preemptible())
+		irq_stack_ptr = IRQ_STACK_PTR(smp_processor_id());
+	else
+		irq_stack_ptr = 0;
 
 	pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk);
 
 	if (!tsk)
 		tsk = current;
 
-	if (regs) {
-		frame.fp = regs->regs[29];
-		frame.sp = regs->sp;
-		frame.pc = regs->pc;
-	} else if (tsk == current) {
+	if (tsk == current) {
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
 		frame.pc = (unsigned long)dump_backtrace;
@@ -168,21 +175,49 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk)
 		frame.sp = thread_saved_sp(tsk);
 		frame.pc = thread_saved_pc(tsk);
 	}
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	frame.graph = tsk->curr_ret_stack;
+#endif
 
-	pr_emerg("Call trace:\n");
+	skip = !!regs;
+	printk("Call trace:\n");
 	while (1) {
 		unsigned long where = frame.pc;
 		unsigned long stack;
 		int ret;
 
-		dump_backtrace_entry(where);
-		ret = unwind_frame(&frame);
+		/* skip until specified stack frame */
+		if (!skip) {
+			dump_backtrace_entry(where);
+		} else if (frame.fp == regs->regs[29]) {
+			skip = 0;
+			/*
+			 * Mostly, this is the case where this function is
+			 * called in panic/abort. As exception handler's
+			 * stack frame does not contain the corresponding pc
+			 * at which an exception has taken place, use regs->pc
+			 * instead.
+			 */
+			dump_backtrace_entry(regs->pc);
+		}
+		ret = unwind_frame(tsk, &frame);
 		if (ret < 0)
 			break;
 		stack = frame.sp;
-		if (in_exception_text(where))
+		if (in_exception_text(where)) {
+			/*
+			 * If we switched to the irq_stack before calling this
+			 * exception handler, then the pt_regs will be on the
+			 * task stack. The easiest way to tell is if the large
+			 * pt_regs would overlap with the end of the irq_stack.
+			 */
+			if (stack < irq_stack_ptr &&
+			    (stack + sizeof(struct pt_regs)) > irq_stack_ptr)
+				stack = IRQ_STACK_TO_TASK_STACK(irq_stack_ptr);
+
 			dump_mem("", "Exception stack", stack,
 				 stack + sizeof(struct pt_regs), false);
+		}
 	}
 }
 
@@ -456,22 +491,22 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 
 void __pte_error(const char *file, int line, unsigned long val)
 {
-	pr_crit("%s:%d: bad pte %016lx.\n", file, line, val);
+	pr_err("%s:%d: bad pte %016lx.\n", file, line, val);
 }
 
 void __pmd_error(const char *file, int line, unsigned long val)
 {
-	pr_crit("%s:%d: bad pmd %016lx.\n", file, line, val);
+	pr_err("%s:%d: bad pmd %016lx.\n", file, line, val);
 }
 
 void __pud_error(const char *file, int line, unsigned long val)
 {
-	pr_crit("%s:%d: bad pud %016lx.\n", file, line, val);
+	pr_err("%s:%d: bad pud %016lx.\n", file, line, val);
 }
 
 void __pgd_error(const char *file, int line, unsigned long val)
 {
-	pr_crit("%s:%d: bad pgd %016lx.\n", file, line, val);
+	pr_err("%s:%d: bad pgd %016lx.\n", file, line, val);
 }
 
 /* GENERIC_BUG traps */
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index f6fe17d88da5..b467fd0a384b 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -15,6 +15,9 @@ ccflags-y := -shared -fno-common -fno-builtin
 ccflags-y += -nostdlib -Wl,-soname=linux-vdso.so.1 \
 		$(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
 
+# Disable gcov profiling for VDSO code
+GCOV_PROFILE := n
+
 # Workaround for bare-metal (ELF) toolchains that neglect to pass -shared
 # down to collect2, resulting in silent corruption of the vDSO image.
 ccflags-y += -Wl,-shared
diff --git a/arch/arm64/kernel/vdso/vdso.S b/arch/arm64/kernel/vdso/vdso.S
index 60c1db54b41a..82379a70ef03 100644
--- a/arch/arm64/kernel/vdso/vdso.S
+++ b/arch/arm64/kernel/vdso/vdso.S
@@ -21,9 +21,8 @@
 #include <linux/const.h>
 #include <asm/page.h>
 
-	__PAGE_ALIGNED_DATA
-
 	.globl vdso_start, vdso_end
+	.section .rodata
 	.balign PAGE_SIZE
 vdso_start:
 	.incbin "arch/arm64/kernel/vdso/vdso.so"
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 1ee2c3937d4e..5a1939a74ff3 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -5,6 +5,7 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
 #include <asm/kernel-pgtable.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
@@ -86,21 +87,23 @@ SECTIONS
 		EXIT_CALL
 		*(.discard)
 		*(.discard.*)
+		*(.interp .dynamic)
 	}
 
-	. = PAGE_OFFSET + TEXT_OFFSET;
+	. = KIMAGE_VADDR + TEXT_OFFSET;
 
 	.head.text : {
 		_text = .;
 		HEAD_TEXT
 	}
-	ALIGN_DEBUG_RO
+	ALIGN_DEBUG_RO_MIN(PAGE_SIZE)
 	.text : {			/* Real text segment		*/
 		_stext = .;		/* Text and read-only data	*/
 			__exception_text_start = .;
 			*(.exception.text)
 			__exception_text_end = .;
 			IRQENTRY_TEXT
+			SOFTIRQENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT
 			LOCK_TEXT
@@ -112,14 +115,13 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	ALIGN_DEBUG_RO
-	RO_DATA(PAGE_SIZE)
-	EXCEPTION_TABLE(8)
+	ALIGN_DEBUG_RO_MIN(PAGE_SIZE)
+	RO_DATA(PAGE_SIZE)		/* everything from this point to */
+	EXCEPTION_TABLE(8)		/* _etext will be marked RO NX   */
 	NOTES
-	ALIGN_DEBUG_RO
-	_etext = .;			/* End of text and rodata section */
 
 	ALIGN_DEBUG_RO_MIN(PAGE_SIZE)
+	_etext = .;			/* End of text and rodata section */
 	__init_begin = .;
 
 	INIT_TEXT_SECTION(8)
@@ -127,7 +129,6 @@ SECTIONS
 		ARM_EXIT_KEEP(EXIT_TEXT)
 	}
 
-	ALIGN_DEBUG_RO_MIN(16)
 	.init.data : {
 		INIT_DATA
 		INIT_SETUP(16)
@@ -135,15 +136,13 @@ SECTIONS
 		CON_INITCALL
 		SECURITY_INITCALL
 		INIT_RAM_FS
+		*(.init.rodata.* .init.bss)	/* from the EFI stub */
 	}
 	.exit.data : {
 		ARM_EXIT_KEEP(EXIT_DATA)
 	}
 
-	PERCPU_SECTION(64)
-
-	. = ALIGN(PAGE_SIZE);
-	__init_end = .;
+	PERCPU_SECTION(L1_CACHE_BYTES)
 
 	. = ALIGN(4);
 	.altinstructions : {
@@ -154,11 +153,28 @@ SECTIONS
 	.altinstr_replacement : {
 		*(.altinstr_replacement)
 	}
+	.rela : ALIGN(8) {
+		__reloc_start = .;
+		*(.rela .rela*)
+		__reloc_end = .;
+	}
+	.dynsym : ALIGN(8) {
+		__dynsym_start = .;
+		*(.dynsym)
+	}
+	.dynstr : {
+		*(.dynstr)
+	}
+	.hash : {
+		*(.hash)
+	}
 
 	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+
 	_data = .;
 	_sdata = .;
-	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 	PECOFF_EDATA_PADDING
 	_edata = .;
 
@@ -189,4 +205,4 @@ ASSERT(__idmap_text_end - (__idmap_text_start & ~(SZ_4K - 1)) <= SZ_4K,
 /*
  * If padding is applied before .head.text, virt<->phys conversions will fail.
  */
-ASSERT(_text == (PAGE_OFFSET + TEXT_OFFSET), "HEAD is misaligned")
+ASSERT(_text == (KIMAGE_VADDR + TEXT_OFFSET), "HEAD is misaligned")
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index a5272c07d1cb..de7450df7629 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -36,6 +36,7 @@ config KVM
 	select HAVE_KVM_EVENTFD
 	select HAVE_KVM_IRQFD
 	select KVM_ARM_VGIC_V3
+	select KVM_ARM_PMU if HW_PERF_EVENTS
 	---help---
 	  Support hosting virtualized guest machines.
 	  We don't support KVM with 16K page tables yet, due to the multiple
@@ -48,6 +49,12 @@ config KVM_ARM_HOST
 	---help---
 	  Provides host support for ARM processors.
 
+config KVM_ARM_PMU
+	bool
+	---help---
+	  Adds support for a virtual Performance Monitoring Unit (PMU) in
+	  virtual machines.
+
 source drivers/vhost/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
index 1949fe5f5424..122cff482ac4 100644
--- a/arch/arm64/kvm/Makefile
+++ b/arch/arm64/kvm/Makefile
@@ -10,6 +10,7 @@ KVM=../../../virt/kvm
 ARM=../../../arch/arm/kvm
 
 obj-$(CONFIG_KVM_ARM_HOST) += kvm.o
+obj-$(CONFIG_KVM_ARM_HOST) += hyp/
 
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/arm.o $(ARM)/mmu.o $(ARM)/mmio.o
@@ -22,8 +23,7 @@ kvm-$(CONFIG_KVM_ARM_HOST) += guest.o debug.o reset.o sys_regs.o sys_regs_generi
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v2.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v2-emul.o
-kvm-$(CONFIG_KVM_ARM_HOST) += vgic-v2-switch.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic-v3-emul.o
-kvm-$(CONFIG_KVM_ARM_HOST) += vgic-v3-switch.o
 kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/arch_timer.o
+kvm-$(CONFIG_KVM_ARM_PMU) += $(KVM)/arm/pmu.o
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index d250160d32bc..32fad75bb9ff 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -28,13 +28,21 @@
 #include <asm/cputype.h>
 #include <asm/uaccess.h>
 #include <asm/kvm.h>
-#include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_coproc.h>
 
 #include "trace.h"
 
+#define VM_STAT(x) { #x, offsetof(struct kvm, stat.x), KVM_STAT_VM }
+#define VCPU_STAT(x) { #x, offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU }
+
 struct kvm_stats_debugfs_item debugfs_entries[] = {
+	VCPU_STAT(hvc_exit_stat),
+	VCPU_STAT(wfe_exit_stat),
+	VCPU_STAT(wfi_exit_stat),
+	VCPU_STAT(mmio_exit_user),
+	VCPU_STAT(mmio_exit_kernel),
+	VCPU_STAT(exits),
 	{ NULL }
 };
 
@@ -186,7 +194,7 @@ static int get_timer_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	u64 val;
 
 	val = kvm_arm_timer_get_reg(vcpu, reg->id);
-	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id));
+	return copy_to_user(uaddr, &val, KVM_REG_SIZE(reg->id)) ? -EFAULT : 0;
 }
 
 /**
@@ -372,3 +380,54 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	}
 	return 0;
 }
+
+int kvm_arm_vcpu_arch_set_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr)
+{
+	int ret;
+
+	switch (attr->group) {
+	case KVM_ARM_VCPU_PMU_V3_CTRL:
+		ret = kvm_arm_pmu_v3_set_attr(vcpu, attr);
+		break;
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
+
+int kvm_arm_vcpu_arch_get_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr)
+{
+	int ret;
+
+	switch (attr->group) {
+	case KVM_ARM_VCPU_PMU_V3_CTRL:
+		ret = kvm_arm_pmu_v3_get_attr(vcpu, attr);
+		break;
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
+
+int kvm_arm_vcpu_arch_has_attr(struct kvm_vcpu *vcpu,
+			       struct kvm_device_attr *attr)
+{
+	int ret;
+
+	switch (attr->group) {
+	case KVM_ARM_VCPU_PMU_V3_CTRL:
+		ret = kvm_arm_pmu_v3_has_attr(vcpu, attr);
+		break;
+	default:
+		ret = -ENXIO;
+		break;
+	}
+
+	return ret;
+}
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 68a0759b1375..eba89e42f0ed 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -23,6 +23,7 @@
 #include <linux/kvm_host.h>
 
 #include <asm/esr.h>
+#include <asm/kvm_asm.h>
 #include <asm/kvm_coproc.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_mmu.h>
@@ -37,8 +38,9 @@ static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	int ret;
 
-	trace_kvm_hvc_arm64(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0),
+	trace_kvm_hvc_arm64(*vcpu_pc(vcpu), vcpu_get_reg(vcpu, 0),
 			    kvm_vcpu_hvc_get_imm(vcpu));
+	vcpu->stat.hvc_exit_stat++;
 
 	ret = kvm_psci_call(vcpu);
 	if (ret < 0) {
@@ -71,9 +73,11 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	if (kvm_vcpu_get_hsr(vcpu) & ESR_ELx_WFx_ISS_WFE) {
 		trace_kvm_wfx_arm64(*vcpu_pc(vcpu), true);
+		vcpu->stat.wfe_exit_stat++;
 		kvm_vcpu_on_spin(vcpu);
 	} else {
 		trace_kvm_wfx_arm64(*vcpu_pc(vcpu), false);
+		vcpu->stat.wfi_exit_stat++;
 		kvm_vcpu_block(vcpu);
 	}
 
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index 178ba2248a98..7d8747c6427c 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -64,7 +64,7 @@ __do_hyp_init:
 	mrs	x4, tcr_el1
 	ldr	x5, =TCR_EL2_MASK
 	and	x4, x4, x5
-	ldr	x5, =TCR_EL2_FLAGS
+	mov	x5, #TCR_EL2_RES1
 	orr	x4, x4, x5
 
 #ifndef CONFIG_ARM64_VA_BITS_48
@@ -85,16 +85,14 @@ __do_hyp_init:
 	ldr_l	x5, idmap_t0sz
 	bfi	x4, x5, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
 #endif
-	msr	tcr_el2, x4
-
-	ldr	x4, =VTCR_EL2_FLAGS
 	/*
 	 * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
-	 * VTCR_EL2.
+	 * TCR_EL2.
 	 */
 	mrs	x5, ID_AA64MMFR0_EL1
 	bfi	x4, x5, #16, #3
-	msr	vtcr_el2, x4
+
+	msr	tcr_el2, x4
 
 	mrs	x4, mair_el1
 	msr	mair_el2, x4
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 1599701ef044..48f19a37b3df 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -18,908 +18,11 @@
 #include <linux/linkage.h>
 
 #include <asm/alternative.h>
-#include <asm/asm-offsets.h>
 #include <asm/assembler.h>
 #include <asm/cpufeature.h>
-#include <asm/debug-monitors.h>
-#include <asm/esr.h>
-#include <asm/fpsimdmacros.h>
-#include <asm/kvm.h>
-#include <asm/kvm_arm.h>
-#include <asm/kvm_asm.h>
-#include <asm/kvm_mmu.h>
-#include <asm/memory.h>
-
-#define CPU_GP_REG_OFFSET(x)	(CPU_GP_REGS + x)
-#define CPU_XREG_OFFSET(x)	CPU_GP_REG_OFFSET(CPU_USER_PT_REGS + 8*x)
-#define CPU_SPSR_OFFSET(x)	CPU_GP_REG_OFFSET(CPU_SPSR + 8*x)
-#define CPU_SYSREG_OFFSET(x)	(CPU_SYSREGS + 8*x)
-
-	.text
-	.pushsection	.hyp.text, "ax"
-	.align	PAGE_SHIFT
-
-.macro save_common_regs
-	// x2: base address for cpu context
-	// x3: tmp register
-
-	add	x3, x2, #CPU_XREG_OFFSET(19)
-	stp	x19, x20, [x3]
-	stp	x21, x22, [x3, #16]
-	stp	x23, x24, [x3, #32]
-	stp	x25, x26, [x3, #48]
-	stp	x27, x28, [x3, #64]
-	stp	x29, lr, [x3, #80]
-
-	mrs	x19, sp_el0
-	mrs	x20, elr_el2		// pc before entering el2
-	mrs	x21, spsr_el2		// pstate before entering el2
-
-	stp	x19, x20, [x3, #96]
-	str	x21, [x3, #112]
-
-	mrs	x22, sp_el1
-	mrs	x23, elr_el1
-	mrs	x24, spsr_el1
-
-	str	x22, [x2, #CPU_GP_REG_OFFSET(CPU_SP_EL1)]
-	str	x23, [x2, #CPU_GP_REG_OFFSET(CPU_ELR_EL1)]
-	str	x24, [x2, #CPU_SPSR_OFFSET(KVM_SPSR_EL1)]
-.endm
-
-.macro restore_common_regs
-	// x2: base address for cpu context
-	// x3: tmp register
-
-	ldr	x22, [x2, #CPU_GP_REG_OFFSET(CPU_SP_EL1)]
-	ldr	x23, [x2, #CPU_GP_REG_OFFSET(CPU_ELR_EL1)]
-	ldr	x24, [x2, #CPU_SPSR_OFFSET(KVM_SPSR_EL1)]
-
-	msr	sp_el1, x22
-	msr	elr_el1, x23
-	msr	spsr_el1, x24
-
-	add	x3, x2, #CPU_XREG_OFFSET(31)    // SP_EL0
-	ldp	x19, x20, [x3]
-	ldr	x21, [x3, #16]
-
-	msr	sp_el0, x19
-	msr	elr_el2, x20 		// pc on return from el2
-	msr	spsr_el2, x21 		// pstate on return from el2
-
-	add	x3, x2, #CPU_XREG_OFFSET(19)
-	ldp	x19, x20, [x3]
-	ldp	x21, x22, [x3, #16]
-	ldp	x23, x24, [x3, #32]
-	ldp	x25, x26, [x3, #48]
-	ldp	x27, x28, [x3, #64]
-	ldp	x29, lr, [x3, #80]
-.endm
-
-.macro save_host_regs
-	save_common_regs
-.endm
-
-.macro restore_host_regs
-	restore_common_regs
-.endm
-
-.macro save_fpsimd
-	// x2: cpu context address
-	// x3, x4: tmp regs
-	add	x3, x2, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
-	fpsimd_save x3, 4
-.endm
-
-.macro restore_fpsimd
-	// x2: cpu context address
-	// x3, x4: tmp regs
-	add	x3, x2, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
-	fpsimd_restore x3, 4
-.endm
-
-.macro save_guest_regs
-	// x0 is the vcpu address
-	// x1 is the return code, do not corrupt!
-	// x2 is the cpu context
-	// x3 is a tmp register
-	// Guest's x0-x3 are on the stack
-
-	// Compute base to save registers
-	add	x3, x2, #CPU_XREG_OFFSET(4)
-	stp	x4, x5, [x3]
-	stp	x6, x7, [x3, #16]
-	stp	x8, x9, [x3, #32]
-	stp	x10, x11, [x3, #48]
-	stp	x12, x13, [x3, #64]
-	stp	x14, x15, [x3, #80]
-	stp	x16, x17, [x3, #96]
-	str	x18, [x3, #112]
-
-	pop	x6, x7			// x2, x3
-	pop	x4, x5			// x0, x1
-
-	add	x3, x2, #CPU_XREG_OFFSET(0)
-	stp	x4, x5, [x3]
-	stp	x6, x7, [x3, #16]
-
-	save_common_regs
-.endm
-
-.macro restore_guest_regs
-	// x0 is the vcpu address.
-	// x2 is the cpu context
-	// x3 is a tmp register
-
-	// Prepare x0-x3 for later restore
-	add	x3, x2, #CPU_XREG_OFFSET(0)
-	ldp	x4, x5, [x3]
-	ldp	x6, x7, [x3, #16]
-	push	x4, x5		// Push x0-x3 on the stack
-	push	x6, x7
-
-	// x4-x18
-	ldp	x4, x5, [x3, #32]
-	ldp	x6, x7, [x3, #48]
-	ldp	x8, x9, [x3, #64]
-	ldp	x10, x11, [x3, #80]
-	ldp	x12, x13, [x3, #96]
-	ldp	x14, x15, [x3, #112]
-	ldp	x16, x17, [x3, #128]
-	ldr	x18, [x3, #144]
-
-	// x19-x29, lr, sp*, elr*, spsr*
-	restore_common_regs
-
-	// Last bits of the 64bit state
-	pop	x2, x3
-	pop	x0, x1
-
-	// Do not touch any register after this!
-.endm
 
 /*
- * Macros to perform system register save/restore.
- *
- * Ordering here is absolutely critical, and must be kept consistent
- * in {save,restore}_sysregs, {save,restore}_guest_32bit_state,
- * and in kvm_asm.h.
- *
- * In other words, don't touch any of these unless you know what
- * you are doing.
- */
-.macro save_sysregs
-	// x2: base address for cpu context
-	// x3: tmp register
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(MPIDR_EL1)
-
-	mrs	x4,	vmpidr_el2
-	mrs	x5,	csselr_el1
-	mrs	x6,	sctlr_el1
-	mrs	x7,	actlr_el1
-	mrs	x8,	cpacr_el1
-	mrs	x9,	ttbr0_el1
-	mrs	x10,	ttbr1_el1
-	mrs	x11,	tcr_el1
-	mrs	x12,	esr_el1
-	mrs	x13, 	afsr0_el1
-	mrs	x14,	afsr1_el1
-	mrs	x15,	far_el1
-	mrs	x16,	mair_el1
-	mrs	x17,	vbar_el1
-	mrs	x18,	contextidr_el1
-	mrs	x19,	tpidr_el0
-	mrs	x20,	tpidrro_el0
-	mrs	x21,	tpidr_el1
-	mrs	x22, 	amair_el1
-	mrs	x23, 	cntkctl_el1
-	mrs	x24,	par_el1
-	mrs	x25,	mdscr_el1
-
-	stp	x4, x5, [x3]
-	stp	x6, x7, [x3, #16]
-	stp	x8, x9, [x3, #32]
-	stp	x10, x11, [x3, #48]
-	stp	x12, x13, [x3, #64]
-	stp	x14, x15, [x3, #80]
-	stp	x16, x17, [x3, #96]
-	stp	x18, x19, [x3, #112]
-	stp	x20, x21, [x3, #128]
-	stp	x22, x23, [x3, #144]
-	stp	x24, x25, [x3, #160]
-.endm
-
-.macro save_debug type
-	// x4: pointer to register set
-	// x5: number of registers to skip
-	// x6..x22 trashed
-
-	adr	x22, 1f
-	add	x22, x22, x5, lsl #2
-	br	x22
-1:
-	mrs	x21, \type\()15_el1
-	mrs	x20, \type\()14_el1
-	mrs	x19, \type\()13_el1
-	mrs	x18, \type\()12_el1
-	mrs	x17, \type\()11_el1
-	mrs	x16, \type\()10_el1
-	mrs	x15, \type\()9_el1
-	mrs	x14, \type\()8_el1
-	mrs	x13, \type\()7_el1
-	mrs	x12, \type\()6_el1
-	mrs	x11, \type\()5_el1
-	mrs	x10, \type\()4_el1
-	mrs	x9, \type\()3_el1
-	mrs	x8, \type\()2_el1
-	mrs	x7, \type\()1_el1
-	mrs	x6, \type\()0_el1
-
-	adr	x22, 1f
-	add	x22, x22, x5, lsl #2
-	br	x22
-1:
-	str	x21, [x4, #(15 * 8)]
-	str	x20, [x4, #(14 * 8)]
-	str	x19, [x4, #(13 * 8)]
-	str	x18, [x4, #(12 * 8)]
-	str	x17, [x4, #(11 * 8)]
-	str	x16, [x4, #(10 * 8)]
-	str	x15, [x4, #(9 * 8)]
-	str	x14, [x4, #(8 * 8)]
-	str	x13, [x4, #(7 * 8)]
-	str	x12, [x4, #(6 * 8)]
-	str	x11, [x4, #(5 * 8)]
-	str	x10, [x4, #(4 * 8)]
-	str	x9, [x4, #(3 * 8)]
-	str	x8, [x4, #(2 * 8)]
-	str	x7, [x4, #(1 * 8)]
-	str	x6, [x4, #(0 * 8)]
-.endm
-
-.macro restore_sysregs
-	// x2: base address for cpu context
-	// x3: tmp register
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(MPIDR_EL1)
-
-	ldp	x4, x5, [x3]
-	ldp	x6, x7, [x3, #16]
-	ldp	x8, x9, [x3, #32]
-	ldp	x10, x11, [x3, #48]
-	ldp	x12, x13, [x3, #64]
-	ldp	x14, x15, [x3, #80]
-	ldp	x16, x17, [x3, #96]
-	ldp	x18, x19, [x3, #112]
-	ldp	x20, x21, [x3, #128]
-	ldp	x22, x23, [x3, #144]
-	ldp	x24, x25, [x3, #160]
-
-	msr	vmpidr_el2,	x4
-	msr	csselr_el1,	x5
-	msr	sctlr_el1,	x6
-	msr	actlr_el1,	x7
-	msr	cpacr_el1,	x8
-	msr	ttbr0_el1,	x9
-	msr	ttbr1_el1,	x10
-	msr	tcr_el1,	x11
-	msr	esr_el1,	x12
-	msr	afsr0_el1,	x13
-	msr	afsr1_el1,	x14
-	msr	far_el1,	x15
-	msr	mair_el1,	x16
-	msr	vbar_el1,	x17
-	msr	contextidr_el1,	x18
-	msr	tpidr_el0,	x19
-	msr	tpidrro_el0,	x20
-	msr	tpidr_el1,	x21
-	msr	amair_el1,	x22
-	msr	cntkctl_el1,	x23
-	msr	par_el1,	x24
-	msr	mdscr_el1,	x25
-.endm
-
-.macro restore_debug type
-	// x4: pointer to register set
-	// x5: number of registers to skip
-	// x6..x22 trashed
-
-	adr	x22, 1f
-	add	x22, x22, x5, lsl #2
-	br	x22
-1:
-	ldr	x21, [x4, #(15 * 8)]
-	ldr	x20, [x4, #(14 * 8)]
-	ldr	x19, [x4, #(13 * 8)]
-	ldr	x18, [x4, #(12 * 8)]
-	ldr	x17, [x4, #(11 * 8)]
-	ldr	x16, [x4, #(10 * 8)]
-	ldr	x15, [x4, #(9 * 8)]
-	ldr	x14, [x4, #(8 * 8)]
-	ldr	x13, [x4, #(7 * 8)]
-	ldr	x12, [x4, #(6 * 8)]
-	ldr	x11, [x4, #(5 * 8)]
-	ldr	x10, [x4, #(4 * 8)]
-	ldr	x9, [x4, #(3 * 8)]
-	ldr	x8, [x4, #(2 * 8)]
-	ldr	x7, [x4, #(1 * 8)]
-	ldr	x6, [x4, #(0 * 8)]
-
-	adr	x22, 1f
-	add	x22, x22, x5, lsl #2
-	br	x22
-1:
-	msr	\type\()15_el1, x21
-	msr	\type\()14_el1, x20
-	msr	\type\()13_el1, x19
-	msr	\type\()12_el1, x18
-	msr	\type\()11_el1, x17
-	msr	\type\()10_el1, x16
-	msr	\type\()9_el1, x15
-	msr	\type\()8_el1, x14
-	msr	\type\()7_el1, x13
-	msr	\type\()6_el1, x12
-	msr	\type\()5_el1, x11
-	msr	\type\()4_el1, x10
-	msr	\type\()3_el1, x9
-	msr	\type\()2_el1, x8
-	msr	\type\()1_el1, x7
-	msr	\type\()0_el1, x6
-.endm
-
-.macro skip_32bit_state tmp, target
-	// Skip 32bit state if not needed
-	mrs	\tmp, hcr_el2
-	tbnz	\tmp, #HCR_RW_SHIFT, \target
-.endm
-
-.macro skip_tee_state tmp, target
-	// Skip ThumbEE state if not needed
-	mrs	\tmp, id_pfr0_el1
-	tbz	\tmp, #12, \target
-.endm
-
-.macro skip_debug_state tmp, target
-	ldr	\tmp, [x0, #VCPU_DEBUG_FLAGS]
-	tbz	\tmp, #KVM_ARM64_DEBUG_DIRTY_SHIFT, \target
-.endm
-
-/*
- * Branch to target if CPTR_EL2.TFP bit is set (VFP/SIMD trapping enabled)
- */
-.macro skip_fpsimd_state tmp, target
-	mrs	\tmp, cptr_el2
-	tbnz	\tmp, #CPTR_EL2_TFP_SHIFT, \target
-.endm
-
-.macro compute_debug_state target
-	// Compute debug state: If any of KDE, MDE or KVM_ARM64_DEBUG_DIRTY
-	// is set, we do a full save/restore cycle and disable trapping.
-	add	x25, x0, #VCPU_CONTEXT
-
-	// Check the state of MDSCR_EL1
-	ldr	x25, [x25, #CPU_SYSREG_OFFSET(MDSCR_EL1)]
-	and	x26, x25, #DBG_MDSCR_KDE
-	and	x25, x25, #DBG_MDSCR_MDE
-	adds	xzr, x25, x26
-	b.eq	9998f		// Nothing to see there
-
-	// If any interesting bits was set, we must set the flag
-	mov	x26, #KVM_ARM64_DEBUG_DIRTY
-	str	x26, [x0, #VCPU_DEBUG_FLAGS]
-	b	9999f		// Don't skip restore
-
-9998:
-	// Otherwise load the flags from memory in case we recently
-	// trapped
-	skip_debug_state x25, \target
-9999:
-.endm
-
-.macro save_guest_32bit_state
-	skip_32bit_state x3, 1f
-
-	add	x3, x2, #CPU_SPSR_OFFSET(KVM_SPSR_ABT)
-	mrs	x4, spsr_abt
-	mrs	x5, spsr_und
-	mrs	x6, spsr_irq
-	mrs	x7, spsr_fiq
-	stp	x4, x5, [x3]
-	stp	x6, x7, [x3, #16]
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DACR32_EL2)
-	mrs	x4, dacr32_el2
-	mrs	x5, ifsr32_el2
-	stp	x4, x5, [x3]
-
-	skip_fpsimd_state x8, 2f
-	mrs	x6, fpexc32_el2
-	str	x6, [x3, #16]
-2:
-	skip_debug_state x8, 1f
-	mrs	x7, dbgvcr32_el2
-	str	x7, [x3, #24]
-1:
-.endm
-
-.macro restore_guest_32bit_state
-	skip_32bit_state x3, 1f
-
-	add	x3, x2, #CPU_SPSR_OFFSET(KVM_SPSR_ABT)
-	ldp	x4, x5, [x3]
-	ldp	x6, x7, [x3, #16]
-	msr	spsr_abt, x4
-	msr	spsr_und, x5
-	msr	spsr_irq, x6
-	msr	spsr_fiq, x7
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DACR32_EL2)
-	ldp	x4, x5, [x3]
-	msr	dacr32_el2, x4
-	msr	ifsr32_el2, x5
-
-	skip_debug_state x8, 1f
-	ldr	x7, [x3, #24]
-	msr	dbgvcr32_el2, x7
-1:
-.endm
-
-.macro activate_traps
-	ldr     x2, [x0, #VCPU_HCR_EL2]
-
-	/*
-	 * We are about to set CPTR_EL2.TFP to trap all floating point
-	 * register accesses to EL2, however, the ARM ARM clearly states that
-	 * traps are only taken to EL2 if the operation would not otherwise
-	 * trap to EL1.  Therefore, always make sure that for 32-bit guests,
-	 * we set FPEXC.EN to prevent traps to EL1, when setting the TFP bit.
-	 */
-	tbnz	x2, #HCR_RW_SHIFT, 99f // open code skip_32bit_state
-	mov	x3, #(1 << 30)
-	msr	fpexc32_el2, x3
-	isb
-99:
-	msr     hcr_el2, x2
-	mov	x2, #CPTR_EL2_TTA
-	orr     x2, x2, #CPTR_EL2_TFP
-	msr	cptr_el2, x2
-
-	mov	x2, #(1 << 15)	// Trap CP15 Cr=15
-	msr	hstr_el2, x2
-
-	// Monitor Debug Config - see kvm_arm_setup_debug()
-	ldr	x2, [x0, #VCPU_MDCR_EL2]
-	msr	mdcr_el2, x2
-.endm
-
-.macro deactivate_traps
-	mov	x2, #HCR_RW
-	msr	hcr_el2, x2
-	msr	hstr_el2, xzr
-
-	mrs	x2, mdcr_el2
-	and	x2, x2, #MDCR_EL2_HPMN_MASK
-	msr	mdcr_el2, x2
-.endm
-
-.macro activate_vm
-	ldr	x1, [x0, #VCPU_KVM]
-	kern_hyp_va	x1
-	ldr	x2, [x1, #KVM_VTTBR]
-	msr	vttbr_el2, x2
-.endm
-
-.macro deactivate_vm
-	msr	vttbr_el2, xzr
-.endm
-
-/*
- * Call into the vgic backend for state saving
- */
-.macro save_vgic_state
-alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF
-	bl	__save_vgic_v2_state
-alternative_else
-	bl	__save_vgic_v3_state
-alternative_endif
-	mrs	x24, hcr_el2
-	mov	x25, #HCR_INT_OVERRIDE
-	neg	x25, x25
-	and	x24, x24, x25
-	msr	hcr_el2, x24
-.endm
-
-/*
- * Call into the vgic backend for state restoring
- */
-.macro restore_vgic_state
-	mrs	x24, hcr_el2
-	ldr	x25, [x0, #VCPU_IRQ_LINES]
-	orr	x24, x24, #HCR_INT_OVERRIDE
-	orr	x24, x24, x25
-	msr	hcr_el2, x24
-alternative_if_not ARM64_HAS_SYSREG_GIC_CPUIF
-	bl	__restore_vgic_v2_state
-alternative_else
-	bl	__restore_vgic_v3_state
-alternative_endif
-.endm
-
-.macro save_timer_state
-	// x0: vcpu pointer
-	ldr	x2, [x0, #VCPU_KVM]
-	kern_hyp_va x2
-	ldr	w3, [x2, #KVM_TIMER_ENABLED]
-	cbz	w3, 1f
-
-	mrs	x3, cntv_ctl_el0
-	and	x3, x3, #3
-	str	w3, [x0, #VCPU_TIMER_CNTV_CTL]
-
-	isb
-
-	mrs	x3, cntv_cval_el0
-	str	x3, [x0, #VCPU_TIMER_CNTV_CVAL]
-
-1:
-	// Disable the virtual timer
-	msr	cntv_ctl_el0, xzr
-
-	// Allow physical timer/counter access for the host
-	mrs	x2, cnthctl_el2
-	orr	x2, x2, #3
-	msr	cnthctl_el2, x2
-
-	// Clear cntvoff for the host
-	msr	cntvoff_el2, xzr
-.endm
-
-.macro restore_timer_state
-	// x0: vcpu pointer
-	// Disallow physical timer access for the guest
-	// Physical counter access is allowed
-	mrs	x2, cnthctl_el2
-	orr	x2, x2, #1
-	bic	x2, x2, #2
-	msr	cnthctl_el2, x2
-
-	ldr	x2, [x0, #VCPU_KVM]
-	kern_hyp_va x2
-	ldr	w3, [x2, #KVM_TIMER_ENABLED]
-	cbz	w3, 1f
-
-	ldr	x3, [x2, #KVM_TIMER_CNTVOFF]
-	msr	cntvoff_el2, x3
-	ldr	x2, [x0, #VCPU_TIMER_CNTV_CVAL]
-	msr	cntv_cval_el0, x2
-	isb
-
-	ldr	w2, [x0, #VCPU_TIMER_CNTV_CTL]
-	and	x2, x2, #3
-	msr	cntv_ctl_el0, x2
-1:
-.endm
-
-__save_sysregs:
-	save_sysregs
-	ret
-
-__restore_sysregs:
-	restore_sysregs
-	ret
-
-/* Save debug state */
-__save_debug:
-	// x2: ptr to CPU context
-	// x3: ptr to debug reg struct
-	// x4/x5/x6-22/x24-26: trashed
-
-	mrs	x26, id_aa64dfr0_el1
-	ubfx	x24, x26, #12, #4	// Extract BRPs
-	ubfx	x25, x26, #20, #4	// Extract WRPs
-	mov	w26, #15
-	sub	w24, w26, w24		// How many BPs to skip
-	sub	w25, w26, w25		// How many WPs to skip
-
-	mov	x5, x24
-	add	x4, x3, #DEBUG_BCR
-	save_debug dbgbcr
-	add	x4, x3, #DEBUG_BVR
-	save_debug dbgbvr
-
-	mov	x5, x25
-	add	x4, x3, #DEBUG_WCR
-	save_debug dbgwcr
-	add	x4, x3, #DEBUG_WVR
-	save_debug dbgwvr
-
-	mrs	x21, mdccint_el1
-	str	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
-	ret
-
-/* Restore debug state */
-__restore_debug:
-	// x2: ptr to CPU context
-	// x3: ptr to debug reg struct
-	// x4/x5/x6-22/x24-26: trashed
-
-	mrs	x26, id_aa64dfr0_el1
-	ubfx	x24, x26, #12, #4	// Extract BRPs
-	ubfx	x25, x26, #20, #4	// Extract WRPs
-	mov	w26, #15
-	sub	w24, w26, w24		// How many BPs to skip
-	sub	w25, w26, w25		// How many WPs to skip
-
-	mov	x5, x24
-	add	x4, x3, #DEBUG_BCR
-	restore_debug dbgbcr
-	add	x4, x3, #DEBUG_BVR
-	restore_debug dbgbvr
-
-	mov	x5, x25
-	add	x4, x3, #DEBUG_WCR
-	restore_debug dbgwcr
-	add	x4, x3, #DEBUG_WVR
-	restore_debug dbgwvr
-
-	ldr	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
-	msr	mdccint_el1, x21
-
-	ret
-
-__save_fpsimd:
-	skip_fpsimd_state x3, 1f
-	save_fpsimd
-1:	ret
-
-__restore_fpsimd:
-	skip_fpsimd_state x3, 1f
-	restore_fpsimd
-1:	ret
-
-switch_to_guest_fpsimd:
-	push	x4, lr
-
-	mrs	x2, cptr_el2
-	bic	x2, x2, #CPTR_EL2_TFP
-	msr	cptr_el2, x2
-	isb
-
-	mrs	x0, tpidr_el2
-
-	ldr	x2, [x0, #VCPU_HOST_CONTEXT]
-	kern_hyp_va x2
-	bl __save_fpsimd
-
-	add	x2, x0, #VCPU_CONTEXT
-	bl __restore_fpsimd
-
-	skip_32bit_state x3, 1f
-	ldr	x4, [x2, #CPU_SYSREG_OFFSET(FPEXC32_EL2)]
-	msr	fpexc32_el2, x4
-1:
-	pop	x4, lr
-	pop	x2, x3
-	pop	x0, x1
-
-	eret
-
-/*
- * u64 __kvm_vcpu_run(struct kvm_vcpu *vcpu);
- *
- * This is the world switch. The first half of the function
- * deals with entering the guest, and anything from __kvm_vcpu_return
- * to the end of the function deals with reentering the host.
- * On the enter path, only x0 (vcpu pointer) must be preserved until
- * the last moment. On the exit path, x0 (vcpu pointer) and x1 (exception
- * code) must both be preserved until the epilogue.
- * In both cases, x2 points to the CPU context we're saving/restoring from/to.
- */
-ENTRY(__kvm_vcpu_run)
-	kern_hyp_va	x0
-	msr	tpidr_el2, x0	// Save the vcpu register
-
-	// Host context
-	ldr	x2, [x0, #VCPU_HOST_CONTEXT]
-	kern_hyp_va x2
-
-	save_host_regs
-	bl __save_sysregs
-
-	compute_debug_state 1f
-	add	x3, x0, #VCPU_HOST_DEBUG_STATE
-	bl	__save_debug
-1:
-	activate_traps
-	activate_vm
-
-	restore_vgic_state
-	restore_timer_state
-
-	// Guest context
-	add	x2, x0, #VCPU_CONTEXT
-
-	// We must restore the 32-bit state before the sysregs, thanks
-	// to Cortex-A57 erratum #852523.
-	restore_guest_32bit_state
-	bl __restore_sysregs
-
-	skip_debug_state x3, 1f
-	ldr	x3, [x0, #VCPU_DEBUG_PTR]
-	kern_hyp_va x3
-	bl	__restore_debug
-1:
-	restore_guest_regs
-
-	// That's it, no more messing around.
-	eret
-
-__kvm_vcpu_return:
-	// Assume x0 is the vcpu pointer, x1 the return code
-	// Guest's x0-x3 are on the stack
-
-	// Guest context
-	add	x2, x0, #VCPU_CONTEXT
-
-	save_guest_regs
-	bl __save_fpsimd
-	bl __save_sysregs
-
-	skip_debug_state x3, 1f
-	ldr	x3, [x0, #VCPU_DEBUG_PTR]
-	kern_hyp_va x3
-	bl	__save_debug
-1:
-	save_guest_32bit_state
-
-	save_timer_state
-	save_vgic_state
-
-	deactivate_traps
-	deactivate_vm
-
-	// Host context
-	ldr	x2, [x0, #VCPU_HOST_CONTEXT]
-	kern_hyp_va x2
-
-	bl __restore_sysregs
-	bl __restore_fpsimd
-	/* Clear FPSIMD and Trace trapping */
-	msr     cptr_el2, xzr
-
-	skip_debug_state x3, 1f
-	// Clear the dirty flag for the next run, as all the state has
-	// already been saved. Note that we nuke the whole 64bit word.
-	// If we ever add more flags, we'll have to be more careful...
-	str	xzr, [x0, #VCPU_DEBUG_FLAGS]
-	add	x3, x0, #VCPU_HOST_DEBUG_STATE
-	bl	__restore_debug
-1:
-	restore_host_regs
-
-	mov	x0, x1
-	ret
-END(__kvm_vcpu_run)
-
-// void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
-ENTRY(__kvm_tlb_flush_vmid_ipa)
-	dsb	ishst
-
-	kern_hyp_va	x0
-	ldr	x2, [x0, #KVM_VTTBR]
-	msr	vttbr_el2, x2
-	isb
-
-	/*
-	 * We could do so much better if we had the VA as well.
-	 * Instead, we invalidate Stage-2 for this IPA, and the
-	 * whole of Stage-1. Weep...
-	 */
-	lsr	x1, x1, #12
-	tlbi	ipas2e1is, x1
-	/*
-	 * We have to ensure completion of the invalidation at Stage-2,
-	 * since a table walk on another CPU could refill a TLB with a
-	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
-	 * the Stage-1 invalidation happened first.
-	 */
-	dsb	ish
-	tlbi	vmalle1is
-	dsb	ish
-	isb
-
-	msr	vttbr_el2, xzr
-	ret
-ENDPROC(__kvm_tlb_flush_vmid_ipa)
-
-/**
- * void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs
- * @struct kvm *kvm - pointer to kvm structure
- *
- * Invalidates all Stage 1 and 2 TLB entries for current VMID.
- */
-ENTRY(__kvm_tlb_flush_vmid)
-	dsb     ishst
-
-	kern_hyp_va     x0
-	ldr     x2, [x0, #KVM_VTTBR]
-	msr     vttbr_el2, x2
-	isb
-
-	tlbi    vmalls12e1is
-	dsb     ish
-	isb
-
-	msr     vttbr_el2, xzr
-	ret
-ENDPROC(__kvm_tlb_flush_vmid)
-
-ENTRY(__kvm_flush_vm_context)
-	dsb	ishst
-	tlbi	alle1is
-	ic	ialluis
-	dsb	ish
-	ret
-ENDPROC(__kvm_flush_vm_context)
-
-__kvm_hyp_panic:
-	// Guess the context by looking at VTTBR:
-	// If zero, then we're already a host.
-	// Otherwise restore a minimal host context before panicing.
-	mrs	x0, vttbr_el2
-	cbz	x0, 1f
-
-	mrs	x0, tpidr_el2
-
-	deactivate_traps
-	deactivate_vm
-
-	ldr	x2, [x0, #VCPU_HOST_CONTEXT]
-	kern_hyp_va x2
-
-	bl __restore_sysregs
-
-	/*
-	 * Make sure we have a valid host stack, and don't leave junk in the
-	 * frame pointer that will give us a misleading host stack unwinding.
-	 */
-	ldr	x22, [x2, #CPU_GP_REG_OFFSET(CPU_SP_EL1)]
-	msr	sp_el1, x22
-	mov	x29, xzr
-
-1:	adr	x0, __hyp_panic_str
-	adr	x1, 2f
-	ldp	x2, x3, [x1]
-	sub	x0, x0, x2
-	add	x0, x0, x3
-	mrs	x1, spsr_el2
-	mrs	x2, elr_el2
-	mrs	x3, esr_el2
-	mrs	x4, far_el2
-	mrs	x5, hpfar_el2
-	mrs	x6, par_el1
-	mrs	x7, tpidr_el2
-
-	mov	lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
-		      PSR_MODE_EL1h)
-	msr	spsr_el2, lr
-	ldr	lr, =panic
-	msr	elr_el2, lr
-	eret
-
-	.align	3
-2:	.quad	HYP_PAGE_OFFSET
-	.quad	PAGE_OFFSET
-ENDPROC(__kvm_hyp_panic)
-
-__hyp_panic_str:
-	.ascii	"HYP panic:\nPS:%08x PC:%p ESR:%p\nFAR:%p HPFAR:%p PAR:%p\nVCPU:%p\n\0"
-
-	.align	2
-
-/*
- * u64 kvm_call_hyp(void *hypfn, ...);
+ * u64 __kvm_call_hyp(void *hypfn, ...);
  *
  * This is not really a variadic function in the classic C-way and care must
  * be taken when calling this to ensure parameters are passed in registers
@@ -930,183 +33,18 @@ __hyp_panic_str:
  * passed as x0, x1, and x2 (a maximum of 3 arguments in addition to the
  * function pointer can be passed).  The function being called must be mapped
  * in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c).  Return values are
- * passed in r0 and r1.
+ * passed in x0.
  *
  * A function pointer with a value of 0 has a special meaning, and is
  * used to implement __hyp_get_vectors in the same way as in
  * arch/arm64/kernel/hyp_stub.S.
  */
-ENTRY(kvm_call_hyp)
+ENTRY(__kvm_call_hyp)
+alternative_if_not ARM64_HAS_VIRT_HOST_EXTN	
 	hvc	#0
 	ret
-ENDPROC(kvm_call_hyp)
-
-.macro invalid_vector	label, target
-	.align	2
-\label:
-	b \target
-ENDPROC(\label)
-.endm
-
-	/* None of these should ever happen */
-	invalid_vector	el2t_sync_invalid, __kvm_hyp_panic
-	invalid_vector	el2t_irq_invalid, __kvm_hyp_panic
-	invalid_vector	el2t_fiq_invalid, __kvm_hyp_panic
-	invalid_vector	el2t_error_invalid, __kvm_hyp_panic
-	invalid_vector	el2h_sync_invalid, __kvm_hyp_panic
-	invalid_vector	el2h_irq_invalid, __kvm_hyp_panic
-	invalid_vector	el2h_fiq_invalid, __kvm_hyp_panic
-	invalid_vector	el2h_error_invalid, __kvm_hyp_panic
-	invalid_vector	el1_sync_invalid, __kvm_hyp_panic
-	invalid_vector	el1_irq_invalid, __kvm_hyp_panic
-	invalid_vector	el1_fiq_invalid, __kvm_hyp_panic
-	invalid_vector	el1_error_invalid, __kvm_hyp_panic
-
-el1_sync:					// Guest trapped into EL2
-	push	x0, x1
-	push	x2, x3
-
-	mrs	x1, esr_el2
-	lsr	x2, x1, #ESR_ELx_EC_SHIFT
-
-	cmp	x2, #ESR_ELx_EC_HVC64
-	b.ne	el1_trap
-
-	mrs	x3, vttbr_el2			// If vttbr is valid, the 64bit guest
-	cbnz	x3, el1_trap			// called HVC
-
-	/* Here, we're pretty sure the host called HVC. */
-	pop	x2, x3
-	pop	x0, x1
-
-	/* Check for __hyp_get_vectors */
-	cbnz	x0, 1f
-	mrs	x0, vbar_el2
-	b	2f
-
-1:	push	lr, xzr
-
-	/*
-	 * Compute the function address in EL2, and shuffle the parameters.
-	 */
-	kern_hyp_va	x0
-	mov	lr, x0
-	mov	x0, x1
-	mov	x1, x2
-	mov	x2, x3
-	blr	lr
-
-	pop	lr, xzr
-2:	eret
-
-el1_trap:
-	/*
-	 * x1: ESR
-	 * x2: ESR_EC
-	 */
-
-	/* Guest accessed VFP/SIMD registers, save host, restore Guest */
-	cmp	x2, #ESR_ELx_EC_FP_ASIMD
-	b.eq	switch_to_guest_fpsimd
-
-	cmp	x2, #ESR_ELx_EC_DABT_LOW
-	mov	x0, #ESR_ELx_EC_IABT_LOW
-	ccmp	x2, x0, #4, ne
-	b.ne	1f		// Not an abort we care about
-
-	/* This is an abort. Check for permission fault */
-	and	x2, x1, #ESR_ELx_FSC_TYPE
-	cmp	x2, #FSC_PERM
-	b.ne	1f		// Not a permission fault
-
-	/*
-	 * Check for Stage-1 page table walk, which is guaranteed
-	 * to give a valid HPFAR_EL2.
-	 */
-	tbnz	x1, #7, 1f	// S1PTW is set
-
-	/* Preserve PAR_EL1 */
-	mrs	x3, par_el1
-	push	x3, xzr
-
-	/*
-	 * Permission fault, HPFAR_EL2 is invalid.
-	 * Resolve the IPA the hard way using the guest VA.
-	 * Stage-1 translation already validated the memory access rights.
-	 * As such, we can use the EL1 translation regime, and don't have
-	 * to distinguish between EL0 and EL1 access.
-	 */
-	mrs	x2, far_el2
-	at	s1e1r, x2
-	isb
-
-	/* Read result */
-	mrs	x3, par_el1
-	pop	x0, xzr			// Restore PAR_EL1 from the stack
-	msr	par_el1, x0
-	tbnz	x3, #0, 3f		// Bail out if we failed the translation
-	ubfx	x3, x3, #12, #36	// Extract IPA
-	lsl	x3, x3, #4		// and present it like HPFAR
-	b	2f
-
-1:	mrs	x3, hpfar_el2
-	mrs	x2, far_el2
-
-2:	mrs	x0, tpidr_el2
-	str	w1, [x0, #VCPU_ESR_EL2]
-	str	x2, [x0, #VCPU_FAR_EL2]
-	str	x3, [x0, #VCPU_HPFAR_EL2]
-
-	mov	x1, #ARM_EXCEPTION_TRAP
-	b	__kvm_vcpu_return
-
-	/*
-	 * Translation failed. Just return to the guest and
-	 * let it fault again. Another CPU is probably playing
-	 * behind our back.
-	 */
-3:	pop	x2, x3
-	pop	x0, x1
-
-	eret
-
-el1_irq:
-	push	x0, x1
-	push	x2, x3
-	mrs	x0, tpidr_el2
-	mov	x1, #ARM_EXCEPTION_IRQ
-	b	__kvm_vcpu_return
-
-	.ltorg
-
-	.align 11
-
-ENTRY(__kvm_hyp_vector)
-	ventry	el2t_sync_invalid		// Synchronous EL2t
-	ventry	el2t_irq_invalid		// IRQ EL2t
-	ventry	el2t_fiq_invalid		// FIQ EL2t
-	ventry	el2t_error_invalid		// Error EL2t
-
-	ventry	el2h_sync_invalid		// Synchronous EL2h
-	ventry	el2h_irq_invalid		// IRQ EL2h
-	ventry	el2h_fiq_invalid		// FIQ EL2h
-	ventry	el2h_error_invalid		// Error EL2h
-
-	ventry	el1_sync			// Synchronous 64-bit EL1
-	ventry	el1_irq				// IRQ 64-bit EL1
-	ventry	el1_fiq_invalid			// FIQ 64-bit EL1
-	ventry	el1_error_invalid		// Error 64-bit EL1
-
-	ventry	el1_sync			// Synchronous 32-bit EL1
-	ventry	el1_irq				// IRQ 32-bit EL1
-	ventry	el1_fiq_invalid			// FIQ 32-bit EL1
-	ventry	el1_error_invalid		// Error 32-bit EL1
-ENDPROC(__kvm_hyp_vector)
-
-
-ENTRY(__kvm_get_mdcr_el2)
-	mrs	x0, mdcr_el2
-	ret
-ENDPROC(__kvm_get_mdcr_el2)
-
-	.popsection
+alternative_else
+	b	__vhe_hyp_call
+	nop
+alternative_endif
+ENDPROC(__kvm_call_hyp)
diff --git a/arch/arm64/kvm/hyp/Makefile b/arch/arm64/kvm/hyp/Makefile
new file mode 100644
index 000000000000..778d0effa2af
--- /dev/null
+++ b/arch/arm64/kvm/hyp/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for Kernel-based Virtual Machine module, HYP part
+#
+
+KVM=../../../../virt/kvm
+
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o
+
+obj-$(CONFIG_KVM_ARM_HOST) += vgic-v3-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += sysreg-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += debug-sr.o
+obj-$(CONFIG_KVM_ARM_HOST) += entry.o
+obj-$(CONFIG_KVM_ARM_HOST) += switch.o
+obj-$(CONFIG_KVM_ARM_HOST) += fpsimd.o
+obj-$(CONFIG_KVM_ARM_HOST) += tlb.o
+obj-$(CONFIG_KVM_ARM_HOST) += hyp-entry.o
+obj-$(CONFIG_KVM_ARM_HOST) += s2-setup.o
+
+GCOV_PROFILE	:= n
+KASAN_SANITIZE	:= n
+UBSAN_SANITIZE	:= n
diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c
new file mode 100644
index 000000000000..33342a776ec7
--- /dev/null
+++ b/arch/arm64/kvm/hyp/debug-sr.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/debug-monitors.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+#define read_debug(r,n)		read_sysreg(r##n##_el1)
+#define write_debug(v,r,n)	write_sysreg(v, r##n##_el1)
+
+#define save_debug(ptr,reg,nr)						\
+	switch (nr) {							\
+	case 15:	ptr[15] = read_debug(reg, 15);			\
+	case 14:	ptr[14] = read_debug(reg, 14);			\
+	case 13:	ptr[13] = read_debug(reg, 13);			\
+	case 12:	ptr[12] = read_debug(reg, 12);			\
+	case 11:	ptr[11] = read_debug(reg, 11);			\
+	case 10:	ptr[10] = read_debug(reg, 10);			\
+	case 9:		ptr[9] = read_debug(reg, 9);			\
+	case 8:		ptr[8] = read_debug(reg, 8);			\
+	case 7:		ptr[7] = read_debug(reg, 7);			\
+	case 6:		ptr[6] = read_debug(reg, 6);			\
+	case 5:		ptr[5] = read_debug(reg, 5);			\
+	case 4:		ptr[4] = read_debug(reg, 4);			\
+	case 3:		ptr[3] = read_debug(reg, 3);			\
+	case 2:		ptr[2] = read_debug(reg, 2);			\
+	case 1:		ptr[1] = read_debug(reg, 1);			\
+	default:	ptr[0] = read_debug(reg, 0);			\
+	}
+
+#define restore_debug(ptr,reg,nr)					\
+	switch (nr) {							\
+	case 15:	write_debug(ptr[15], reg, 15);			\
+	case 14:	write_debug(ptr[14], reg, 14);			\
+	case 13:	write_debug(ptr[13], reg, 13);			\
+	case 12:	write_debug(ptr[12], reg, 12);			\
+	case 11:	write_debug(ptr[11], reg, 11);			\
+	case 10:	write_debug(ptr[10], reg, 10);			\
+	case 9:		write_debug(ptr[9], reg, 9);			\
+	case 8:		write_debug(ptr[8], reg, 8);			\
+	case 7:		write_debug(ptr[7], reg, 7);			\
+	case 6:		write_debug(ptr[6], reg, 6);			\
+	case 5:		write_debug(ptr[5], reg, 5);			\
+	case 4:		write_debug(ptr[4], reg, 4);			\
+	case 3:		write_debug(ptr[3], reg, 3);			\
+	case 2:		write_debug(ptr[2], reg, 2);			\
+	case 1:		write_debug(ptr[1], reg, 1);			\
+	default:	write_debug(ptr[0], reg, 0);			\
+	}
+
+void __hyp_text __debug_save_state(struct kvm_vcpu *vcpu,
+				   struct kvm_guest_debug_arch *dbg,
+				   struct kvm_cpu_context *ctxt)
+{
+	u64 aa64dfr0;
+	int brps, wrps;
+
+	if (!(vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY))
+		return;
+
+	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
+	brps = (aa64dfr0 >> 12) & 0xf;
+	wrps = (aa64dfr0 >> 20) & 0xf;
+
+	save_debug(dbg->dbg_bcr, dbgbcr, brps);
+	save_debug(dbg->dbg_bvr, dbgbvr, brps);
+	save_debug(dbg->dbg_wcr, dbgwcr, wrps);
+	save_debug(dbg->dbg_wvr, dbgwvr, wrps);
+
+	ctxt->sys_regs[MDCCINT_EL1] = read_sysreg(mdccint_el1);
+}
+
+void __hyp_text __debug_restore_state(struct kvm_vcpu *vcpu,
+				      struct kvm_guest_debug_arch *dbg,
+				      struct kvm_cpu_context *ctxt)
+{
+	u64 aa64dfr0;
+	int brps, wrps;
+
+	if (!(vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY))
+		return;
+
+	aa64dfr0 = read_sysreg(id_aa64dfr0_el1);
+
+	brps = (aa64dfr0 >> 12) & 0xf;
+	wrps = (aa64dfr0 >> 20) & 0xf;
+
+	restore_debug(dbg->dbg_bcr, dbgbcr, brps);
+	restore_debug(dbg->dbg_bvr, dbgbvr, brps);
+	restore_debug(dbg->dbg_wcr, dbgwcr, wrps);
+	restore_debug(dbg->dbg_wvr, dbgwvr, wrps);
+
+	write_sysreg(ctxt->sys_regs[MDCCINT_EL1], mdccint_el1);
+}
+
+void __hyp_text __debug_cond_save_host_state(struct kvm_vcpu *vcpu)
+{
+	/* If any of KDE, MDE or KVM_ARM64_DEBUG_DIRTY is set, perform
+	 * a full save/restore cycle. */
+	if ((vcpu->arch.ctxt.sys_regs[MDSCR_EL1] & DBG_MDSCR_KDE) ||
+	    (vcpu->arch.ctxt.sys_regs[MDSCR_EL1] & DBG_MDSCR_MDE))
+		vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
+
+	__debug_save_state(vcpu, &vcpu->arch.host_debug_state,
+			   kern_hyp_va(vcpu->arch.host_cpu_context));
+}
+
+void __hyp_text __debug_cond_restore_host_state(struct kvm_vcpu *vcpu)
+{
+	__debug_restore_state(vcpu, &vcpu->arch.host_debug_state,
+			      kern_hyp_va(vcpu->arch.host_cpu_context));
+
+	if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
+		vcpu->arch.debug_flags &= ~KVM_ARM64_DEBUG_DIRTY;
+}
+
+static u32 __hyp_text __debug_read_mdcr_el2(void)
+{
+	return read_sysreg(mdcr_el2);
+}
+
+__alias(__debug_read_mdcr_el2) u32 __kvm_get_mdcr_el2(void);
diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S
new file mode 100644
index 000000000000..ce9e5e5f28cf
--- /dev/null
+++ b/arch/arm64/kvm/hyp/entry.S
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/fpsimdmacros.h>
+#include <asm/kvm.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+
+#define CPU_GP_REG_OFFSET(x)	(CPU_GP_REGS + x)
+#define CPU_XREG_OFFSET(x)	CPU_GP_REG_OFFSET(CPU_USER_PT_REGS + 8*x)
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+.macro save_callee_saved_regs ctxt
+	stp	x19, x20, [\ctxt, #CPU_XREG_OFFSET(19)]
+	stp	x21, x22, [\ctxt, #CPU_XREG_OFFSET(21)]
+	stp	x23, x24, [\ctxt, #CPU_XREG_OFFSET(23)]
+	stp	x25, x26, [\ctxt, #CPU_XREG_OFFSET(25)]
+	stp	x27, x28, [\ctxt, #CPU_XREG_OFFSET(27)]
+	stp	x29, lr,  [\ctxt, #CPU_XREG_OFFSET(29)]
+.endm
+
+.macro restore_callee_saved_regs ctxt
+	ldp	x19, x20, [\ctxt, #CPU_XREG_OFFSET(19)]
+	ldp	x21, x22, [\ctxt, #CPU_XREG_OFFSET(21)]
+	ldp	x23, x24, [\ctxt, #CPU_XREG_OFFSET(23)]
+	ldp	x25, x26, [\ctxt, #CPU_XREG_OFFSET(25)]
+	ldp	x27, x28, [\ctxt, #CPU_XREG_OFFSET(27)]
+	ldp	x29, lr,  [\ctxt, #CPU_XREG_OFFSET(29)]
+.endm
+
+/*
+ * u64 __guest_enter(struct kvm_vcpu *vcpu,
+ *		     struct kvm_cpu_context *host_ctxt);
+ */
+ENTRY(__guest_enter)
+	// x0: vcpu
+	// x1: host/guest context
+	// x2-x18: clobbered by macros
+
+	// Store the host regs
+	save_callee_saved_regs x1
+
+	// Preserve vcpu & host_ctxt for use at exit time
+	stp	x0, x1, [sp, #-16]!
+
+	add	x1, x0, #VCPU_CONTEXT
+
+	// Prepare x0-x1 for later restore by pushing them onto the stack
+	ldp	x2, x3, [x1, #CPU_XREG_OFFSET(0)]
+	stp	x2, x3, [sp, #-16]!
+
+	// x2-x18
+	ldp	x2, x3,   [x1, #CPU_XREG_OFFSET(2)]
+	ldp	x4, x5,   [x1, #CPU_XREG_OFFSET(4)]
+	ldp	x6, x7,   [x1, #CPU_XREG_OFFSET(6)]
+	ldp	x8, x9,   [x1, #CPU_XREG_OFFSET(8)]
+	ldp	x10, x11, [x1, #CPU_XREG_OFFSET(10)]
+	ldp	x12, x13, [x1, #CPU_XREG_OFFSET(12)]
+	ldp	x14, x15, [x1, #CPU_XREG_OFFSET(14)]
+	ldp	x16, x17, [x1, #CPU_XREG_OFFSET(16)]
+	ldr	x18,      [x1, #CPU_XREG_OFFSET(18)]
+
+	// x19-x29, lr
+	restore_callee_saved_regs x1
+
+	// Last bits of the 64bit state
+	ldp	x0, x1, [sp], #16
+
+	// Do not touch any register after this!
+	eret
+ENDPROC(__guest_enter)
+
+ENTRY(__guest_exit)
+	// x0: vcpu
+	// x1: return code
+	// x2-x3: free
+	// x4-x29,lr: vcpu regs
+	// vcpu x0-x3 on the stack
+
+	add	x2, x0, #VCPU_CONTEXT
+
+	stp	x4, x5,   [x2, #CPU_XREG_OFFSET(4)]
+	stp	x6, x7,   [x2, #CPU_XREG_OFFSET(6)]
+	stp	x8, x9,   [x2, #CPU_XREG_OFFSET(8)]
+	stp	x10, x11, [x2, #CPU_XREG_OFFSET(10)]
+	stp	x12, x13, [x2, #CPU_XREG_OFFSET(12)]
+	stp	x14, x15, [x2, #CPU_XREG_OFFSET(14)]
+	stp	x16, x17, [x2, #CPU_XREG_OFFSET(16)]
+	str	x18,      [x2, #CPU_XREG_OFFSET(18)]
+
+	ldp	x6, x7, [sp], #16	// x2, x3
+	ldp	x4, x5, [sp], #16	// x0, x1
+
+	stp	x4, x5, [x2, #CPU_XREG_OFFSET(0)]
+	stp	x6, x7, [x2, #CPU_XREG_OFFSET(2)]
+
+	save_callee_saved_regs x2
+
+	// Restore vcpu & host_ctxt from the stack
+	// (preserving return code in x1)
+	ldp	x0, x2, [sp], #16
+	// Now restore the host regs
+	restore_callee_saved_regs x2
+
+	mov	x0, x1
+	ret
+ENDPROC(__guest_exit)
+
+ENTRY(__fpsimd_guest_restore)
+	stp	x4, lr, [sp, #-16]!
+
+alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
+	mrs	x2, cptr_el2
+	bic	x2, x2, #CPTR_EL2_TFP
+	msr	cptr_el2, x2
+alternative_else
+	mrs	x2, cpacr_el1
+	orr	x2, x2, #CPACR_EL1_FPEN
+	msr	cpacr_el1, x2
+alternative_endif
+	isb
+
+	mrs	x3, tpidr_el2
+
+	ldr	x0, [x3, #VCPU_HOST_CONTEXT]
+	kern_hyp_va x0
+	add	x0, x0, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
+	bl	__fpsimd_save_state
+
+	add	x2, x3, #VCPU_CONTEXT
+	add	x0, x2, #CPU_GP_REG_OFFSET(CPU_FP_REGS)
+	bl	__fpsimd_restore_state
+
+	// Skip restoring fpexc32 for AArch64 guests
+	mrs	x1, hcr_el2
+	tbnz	x1, #HCR_RW_SHIFT, 1f
+	ldr	x4, [x3, #VCPU_FPEXC32_EL2]
+	msr	fpexc32_el2, x4
+1:
+	ldp	x4, lr, [sp], #16
+	ldp	x2, x3, [sp], #16
+	ldp	x0, x1, [sp], #16
+
+	eret
+ENDPROC(__fpsimd_guest_restore)
diff --git a/arch/arm/kernel/psci-call.S b/arch/arm64/kvm/hyp/fpsimd.S
index a78e9e1e206d..da3f22c7f14a 100644
--- a/arch/arm/kernel/psci-call.S
+++ b/arch/arm64/kvm/hyp/fpsimd.S
@@ -1,4 +1,7 @@
 /*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -8,24 +11,23 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * Copyright (C) 2015 ARM Limited
- *
- * Author: Mark Rutland <mark.rutland@arm.com>
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include <linux/linkage.h>
 
-#include <asm/opcodes-sec.h>
-#include <asm/opcodes-virt.h>
+#include <asm/fpsimdmacros.h>
+
+	.text
+	.pushsection	.hyp.text, "ax"
 
-/* int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */
-ENTRY(__invoke_psci_fn_hvc)
-	__HVC(0)
-	bx	lr
-ENDPROC(__invoke_psci_fn_hvc)
+ENTRY(__fpsimd_save_state)
+	fpsimd_save	x0, 1
+	ret
+ENDPROC(__fpsimd_save_state)
 
-/* int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */
-ENTRY(__invoke_psci_fn_smc)
-	__SMC(0)
-	bx	lr
-ENDPROC(__invoke_psci_fn_smc)
+ENTRY(__fpsimd_restore_state)
+	fpsimd_restore	x0, 1
+	ret
+ENDPROC(__fpsimd_restore_state)
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
new file mode 100644
index 000000000000..3488894397ff
--- /dev/null
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/alternative.h>
+#include <asm/assembler.h>
+#include <asm/cpufeature.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_mmu.h>
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+.macro	save_x0_to_x3
+	stp	x0, x1, [sp, #-16]!
+	stp	x2, x3, [sp, #-16]!
+.endm
+
+.macro	restore_x0_to_x3
+	ldp	x2, x3, [sp], #16
+	ldp	x0, x1, [sp], #16
+.endm
+
+.macro do_el2_call
+	/*
+	 * Shuffle the parameters before calling the function
+	 * pointed to in x0. Assumes parameters in x[1,2,3].
+	 */
+	sub	sp, sp, #16
+	str	lr, [sp]
+	mov	lr, x0
+	mov	x0, x1
+	mov	x1, x2
+	mov	x2, x3
+	blr	lr
+	ldr	lr, [sp]
+	add	sp, sp, #16
+.endm
+
+ENTRY(__vhe_hyp_call)
+	do_el2_call
+	/*
+	 * We used to rely on having an exception return to get
+	 * an implicit isb. In the E2H case, we don't have it anymore.
+	 * rather than changing all the leaf functions, just do it here
+	 * before returning to the rest of the kernel.
+	 */
+	isb
+	ret
+ENDPROC(__vhe_hyp_call)
+	
+el1_sync:				// Guest trapped into EL2
+	save_x0_to_x3
+
+alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
+	mrs	x1, esr_el2
+alternative_else
+	mrs	x1, esr_el1
+alternative_endif
+	lsr	x2, x1, #ESR_ELx_EC_SHIFT
+
+	cmp	x2, #ESR_ELx_EC_HVC64
+	b.ne	el1_trap
+
+	mrs	x3, vttbr_el2		// If vttbr is valid, the 64bit guest
+	cbnz	x3, el1_trap		// called HVC
+
+	/* Here, we're pretty sure the host called HVC. */
+	restore_x0_to_x3
+
+	/* Check for __hyp_get_vectors */
+	cbnz	x0, 1f
+	mrs	x0, vbar_el2
+	b	2f
+
+1:
+	/*
+	 * Perform the EL2 call
+	 */
+	kern_hyp_va	x0
+	do_el2_call
+
+2:	eret
+
+el1_trap:
+	/*
+	 * x1: ESR
+	 * x2: ESR_EC
+	 */
+
+	/* Guest accessed VFP/SIMD registers, save host, restore Guest */
+	cmp	x2, #ESR_ELx_EC_FP_ASIMD
+	b.eq	__fpsimd_guest_restore
+
+	mrs	x0, tpidr_el2
+	mov	x1, #ARM_EXCEPTION_TRAP
+	b	__guest_exit
+
+el1_irq:
+	save_x0_to_x3
+	mrs	x0, tpidr_el2
+	mov	x1, #ARM_EXCEPTION_IRQ
+	b	__guest_exit
+
+ENTRY(__hyp_do_panic)
+	mov	lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
+		      PSR_MODE_EL1h)
+	msr	spsr_el2, lr
+	ldr	lr, =panic
+	msr	elr_el2, lr
+	eret
+ENDPROC(__hyp_do_panic)
+
+.macro invalid_vector	label, target = __hyp_panic
+	.align	2
+\label:
+	b \target
+ENDPROC(\label)
+.endm
+
+	/* None of these should ever happen */
+	invalid_vector	el2t_sync_invalid
+	invalid_vector	el2t_irq_invalid
+	invalid_vector	el2t_fiq_invalid
+	invalid_vector	el2t_error_invalid
+	invalid_vector	el2h_sync_invalid
+	invalid_vector	el2h_irq_invalid
+	invalid_vector	el2h_fiq_invalid
+	invalid_vector	el2h_error_invalid
+	invalid_vector	el1_sync_invalid
+	invalid_vector	el1_irq_invalid
+	invalid_vector	el1_fiq_invalid
+	invalid_vector	el1_error_invalid
+
+	.ltorg
+
+	.align 11
+
+ENTRY(__kvm_hyp_vector)
+	ventry	el2t_sync_invalid		// Synchronous EL2t
+	ventry	el2t_irq_invalid		// IRQ EL2t
+	ventry	el2t_fiq_invalid		// FIQ EL2t
+	ventry	el2t_error_invalid		// Error EL2t
+
+	ventry	el2h_sync_invalid		// Synchronous EL2h
+	ventry	el2h_irq_invalid		// IRQ EL2h
+	ventry	el2h_fiq_invalid		// FIQ EL2h
+	ventry	el2h_error_invalid		// Error EL2h
+
+	ventry	el1_sync			// Synchronous 64-bit EL1
+	ventry	el1_irq				// IRQ 64-bit EL1
+	ventry	el1_fiq_invalid			// FIQ 64-bit EL1
+	ventry	el1_error_invalid		// Error 64-bit EL1
+
+	ventry	el1_sync			// Synchronous 32-bit EL1
+	ventry	el1_irq				// IRQ 32-bit EL1
+	ventry	el1_fiq_invalid			// FIQ 32-bit EL1
+	ventry	el1_error_invalid		// Error 32-bit EL1
+ENDPROC(__kvm_hyp_vector)
diff --git a/arch/arm64/kvm/hyp/s2-setup.c b/arch/arm64/kvm/hyp/s2-setup.c
new file mode 100644
index 000000000000..bcbe761a5a3d
--- /dev/null
+++ b/arch/arm64/kvm/hyp/s2-setup.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2016 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/types.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+u32 __hyp_text __init_stage2_translation(void)
+{
+	u64 val = VTCR_EL2_FLAGS;
+	u64 parange;
+	u64 tmp;
+
+	/*
+	 * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS
+	 * bits in VTCR_EL2. Amusingly, the PARange is 4 bits, while
+	 * PS is only 3. Fortunately, bit 19 is RES0 in VTCR_EL2...
+	 */
+	parange = read_sysreg(id_aa64mmfr0_el1) & 7;
+	val |= parange << 16;
+
+	/* Compute the actual PARange... */
+	switch (parange) {
+	case 0:
+		parange = 32;
+		break;
+	case 1:
+		parange = 36;
+		break;
+	case 2:
+		parange = 40;
+		break;
+	case 3:
+		parange = 42;
+		break;
+	case 4:
+		parange = 44;
+		break;
+	case 5:
+	default:
+		parange = 48;
+		break;
+	}
+
+	/*
+	 * ... and clamp it to 40 bits, unless we have some braindead
+	 * HW that implements less than that. In all cases, we'll
+	 * return that value for the rest of the kernel to decide what
+	 * to do.
+	 */
+	val |= 64 - (parange > 40 ? 40 : parange);
+
+	/*
+	 * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS
+	 * bit in VTCR_EL2.
+	 */
+	tmp = (read_sysreg(id_aa64mmfr1_el1) >> ID_AA64MMFR1_VMIDBITS_SHIFT) & 0xf;
+	val |= (tmp == ID_AA64MMFR1_VMIDBITS_16) ?
+			VTCR_EL2_VS_16BIT :
+			VTCR_EL2_VS_8BIT;
+
+	write_sysreg(val, vtcr_el2);
+
+	return parange;
+}
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
new file mode 100644
index 000000000000..437cfad5e3d8
--- /dev/null
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/types.h>
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+static bool __hyp_text __fpsimd_enabled_nvhe(void)
+{
+	return !(read_sysreg(cptr_el2) & CPTR_EL2_TFP);
+}
+
+static bool __hyp_text __fpsimd_enabled_vhe(void)
+{
+	return !!(read_sysreg(cpacr_el1) & CPACR_EL1_FPEN);
+}
+
+static hyp_alternate_select(__fpsimd_is_enabled,
+			    __fpsimd_enabled_nvhe, __fpsimd_enabled_vhe,
+			    ARM64_HAS_VIRT_HOST_EXTN);
+
+bool __hyp_text __fpsimd_enabled(void)
+{
+	return __fpsimd_is_enabled()();
+}
+
+static void __hyp_text __activate_traps_vhe(void)
+{
+	u64 val;
+
+	val = read_sysreg(cpacr_el1);
+	val |= CPACR_EL1_TTA;
+	val &= ~CPACR_EL1_FPEN;
+	write_sysreg(val, cpacr_el1);
+
+	write_sysreg(__kvm_hyp_vector, vbar_el1);
+}
+
+static void __hyp_text __activate_traps_nvhe(void)
+{
+	u64 val;
+
+	val = CPTR_EL2_DEFAULT;
+	val |= CPTR_EL2_TTA | CPTR_EL2_TFP;
+	write_sysreg(val, cptr_el2);
+}
+
+static hyp_alternate_select(__activate_traps_arch,
+			    __activate_traps_nvhe, __activate_traps_vhe,
+			    ARM64_HAS_VIRT_HOST_EXTN);
+
+static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
+{
+	u64 val;
+
+	/*
+	 * We are about to set CPTR_EL2.TFP to trap all floating point
+	 * register accesses to EL2, however, the ARM ARM clearly states that
+	 * traps are only taken to EL2 if the operation would not otherwise
+	 * trap to EL1.  Therefore, always make sure that for 32-bit guests,
+	 * we set FPEXC.EN to prevent traps to EL1, when setting the TFP bit.
+	 */
+	val = vcpu->arch.hcr_el2;
+	if (!(val & HCR_RW)) {
+		write_sysreg(1 << 30, fpexc32_el2);
+		isb();
+	}
+	write_sysreg(val, hcr_el2);
+	/* Trap on AArch32 cp15 c15 accesses (EL1 or EL0) */
+	write_sysreg(1 << 15, hstr_el2);
+	/* Make sure we trap PMU access from EL0 to EL2 */
+	write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0);
+	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+	__activate_traps_arch()();
+}
+
+static void __hyp_text __deactivate_traps_vhe(void)
+{
+	extern char vectors[];	/* kernel exception vectors */
+
+	write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2);
+	write_sysreg(CPACR_EL1_FPEN, cpacr_el1);
+	write_sysreg(vectors, vbar_el1);
+}
+
+static void __hyp_text __deactivate_traps_nvhe(void)
+{
+	write_sysreg(HCR_RW, hcr_el2);
+	write_sysreg(CPTR_EL2_DEFAULT, cptr_el2);
+}
+
+static hyp_alternate_select(__deactivate_traps_arch,
+			    __deactivate_traps_nvhe, __deactivate_traps_vhe,
+			    ARM64_HAS_VIRT_HOST_EXTN);
+
+static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
+{
+	__deactivate_traps_arch()();
+	write_sysreg(0, hstr_el2);
+	write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2);
+	write_sysreg(0, pmuserenr_el0);
+}
+
+static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = kern_hyp_va(vcpu->kvm);
+	write_sysreg(kvm->arch.vttbr, vttbr_el2);
+}
+
+static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu)
+{
+	write_sysreg(0, vttbr_el2);
+}
+
+static hyp_alternate_select(__vgic_call_save_state,
+			    __vgic_v2_save_state, __vgic_v3_save_state,
+			    ARM64_HAS_SYSREG_GIC_CPUIF);
+
+static hyp_alternate_select(__vgic_call_restore_state,
+			    __vgic_v2_restore_state, __vgic_v3_restore_state,
+			    ARM64_HAS_SYSREG_GIC_CPUIF);
+
+static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu)
+{
+	__vgic_call_save_state()(vcpu);
+	write_sysreg(read_sysreg(hcr_el2) & ~HCR_INT_OVERRIDE, hcr_el2);
+}
+
+static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu)
+{
+	u64 val;
+
+	val = read_sysreg(hcr_el2);
+	val |= 	HCR_INT_OVERRIDE;
+	val |= vcpu->arch.irq_lines;
+	write_sysreg(val, hcr_el2);
+
+	__vgic_call_restore_state()(vcpu);
+}
+
+static bool __hyp_text __true_value(void)
+{
+	return true;
+}
+
+static bool __hyp_text __false_value(void)
+{
+	return false;
+}
+
+static hyp_alternate_select(__check_arm_834220,
+			    __false_value, __true_value,
+			    ARM64_WORKAROUND_834220);
+
+static bool __hyp_text __translate_far_to_hpfar(u64 far, u64 *hpfar)
+{
+	u64 par, tmp;
+
+	/*
+	 * Resolve the IPA the hard way using the guest VA.
+	 *
+	 * Stage-1 translation already validated the memory access
+	 * rights. As such, we can use the EL1 translation regime, and
+	 * don't have to distinguish between EL0 and EL1 access.
+	 *
+	 * We do need to save/restore PAR_EL1 though, as we haven't
+	 * saved the guest context yet, and we may return early...
+	 */
+	par = read_sysreg(par_el1);
+	asm volatile("at s1e1r, %0" : : "r" (far));
+	isb();
+
+	tmp = read_sysreg(par_el1);
+	write_sysreg(par, par_el1);
+
+	if (unlikely(tmp & 1))
+		return false; /* Translation failed, back to guest */
+
+	/* Convert PAR to HPFAR format */
+	*hpfar = ((tmp >> 12) & ((1UL << 36) - 1)) << 4;
+	return true;
+}
+
+static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu)
+{
+	u64 esr = read_sysreg_el2(esr);
+	u8 ec = esr >> ESR_ELx_EC_SHIFT;
+	u64 hpfar, far;
+
+	vcpu->arch.fault.esr_el2 = esr;
+
+	if (ec != ESR_ELx_EC_DABT_LOW && ec != ESR_ELx_EC_IABT_LOW)
+		return true;
+
+	far = read_sysreg_el2(far);
+
+	/*
+	 * The HPFAR can be invalid if the stage 2 fault did not
+	 * happen during a stage 1 page table walk (the ESR_EL2.S1PTW
+	 * bit is clear) and one of the two following cases are true:
+	 *   1. The fault was due to a permission fault
+	 *   2. The processor carries errata 834220
+	 *
+	 * Therefore, for all non S1PTW faults where we either have a
+	 * permission fault or the errata workaround is enabled, we
+	 * resolve the IPA using the AT instruction.
+	 */
+	if (!(esr & ESR_ELx_S1PTW) &&
+	    (__check_arm_834220()() || (esr & ESR_ELx_FSC_TYPE) == FSC_PERM)) {
+		if (!__translate_far_to_hpfar(far, &hpfar))
+			return false;
+	} else {
+		hpfar = read_sysreg(hpfar_el2);
+	}
+
+	vcpu->arch.fault.far_el2 = far;
+	vcpu->arch.fault.hpfar_el2 = hpfar;
+	return true;
+}
+
+static int __hyp_text __guest_run(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpu_context *host_ctxt;
+	struct kvm_cpu_context *guest_ctxt;
+	bool fp_enabled;
+	u64 exit_code;
+
+	vcpu = kern_hyp_va(vcpu);
+	write_sysreg(vcpu, tpidr_el2);
+
+	host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
+	guest_ctxt = &vcpu->arch.ctxt;
+
+	__sysreg_save_host_state(host_ctxt);
+	__debug_cond_save_host_state(vcpu);
+
+	__activate_traps(vcpu);
+	__activate_vm(vcpu);
+
+	__vgic_restore_state(vcpu);
+	__timer_restore_state(vcpu);
+
+	/*
+	 * We must restore the 32-bit state before the sysregs, thanks
+	 * to Cortex-A57 erratum #852523.
+	 */
+	__sysreg32_restore_state(vcpu);
+	__sysreg_restore_guest_state(guest_ctxt);
+	__debug_restore_state(vcpu, kern_hyp_va(vcpu->arch.debug_ptr), guest_ctxt);
+
+	/* Jump in the fire! */
+again:
+	exit_code = __guest_enter(vcpu, host_ctxt);
+	/* And we're baaack! */
+
+	if (exit_code == ARM_EXCEPTION_TRAP && !__populate_fault_info(vcpu))
+		goto again;
+
+	fp_enabled = __fpsimd_enabled();
+
+	__sysreg_save_guest_state(guest_ctxt);
+	__sysreg32_save_state(vcpu);
+	__timer_save_state(vcpu);
+	__vgic_save_state(vcpu);
+
+	__deactivate_traps(vcpu);
+	__deactivate_vm(vcpu);
+
+	__sysreg_restore_host_state(host_ctxt);
+
+	if (fp_enabled) {
+		__fpsimd_save_state(&guest_ctxt->gp_regs.fp_regs);
+		__fpsimd_restore_state(&host_ctxt->gp_regs.fp_regs);
+	}
+
+	__debug_save_state(vcpu, kern_hyp_va(vcpu->arch.debug_ptr), guest_ctxt);
+	__debug_cond_restore_host_state(vcpu);
+
+	return exit_code;
+}
+
+__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
+
+static const char __hyp_panic_string[] = "HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%p\n";
+
+static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par)
+{
+	unsigned long str_va = (unsigned long)__hyp_panic_string;
+
+	__hyp_do_panic(hyp_kern_va(str_va),
+		       spsr,  elr,
+		       read_sysreg(esr_el2),   read_sysreg_el2(far),
+		       read_sysreg(hpfar_el2), par,
+		       (void *)read_sysreg(tpidr_el2));
+}
+
+static void __hyp_text __hyp_call_panic_vhe(u64 spsr, u64 elr, u64 par)
+{
+	panic(__hyp_panic_string,
+	      spsr,  elr,
+	      read_sysreg_el2(esr),   read_sysreg_el2(far),
+	      read_sysreg(hpfar_el2), par,
+	      (void *)read_sysreg(tpidr_el2));
+}
+
+static hyp_alternate_select(__hyp_call_panic,
+			    __hyp_call_panic_nvhe, __hyp_call_panic_vhe,
+			    ARM64_HAS_VIRT_HOST_EXTN);
+
+void __hyp_text __noreturn __hyp_panic(void)
+{
+	u64 spsr = read_sysreg_el2(spsr);
+	u64 elr = read_sysreg_el2(elr);
+	u64 par = read_sysreg(par_el1);
+
+	if (read_sysreg(vttbr_el2)) {
+		struct kvm_vcpu *vcpu;
+		struct kvm_cpu_context *host_ctxt;
+
+		vcpu = (struct kvm_vcpu *)read_sysreg(tpidr_el2);
+		host_ctxt = kern_hyp_va(vcpu->arch.host_cpu_context);
+		__deactivate_traps(vcpu);
+		__deactivate_vm(vcpu);
+		__sysreg_restore_host_state(host_ctxt);
+	}
+
+	/* Call panic for real */
+	__hyp_call_panic()(spsr, elr, par);
+
+	unreachable();
+}
diff --git a/arch/arm64/kvm/hyp/sysreg-sr.c b/arch/arm64/kvm/hyp/sysreg-sr.c
new file mode 100644
index 000000000000..0f7c40eb3f53
--- /dev/null
+++ b/arch/arm64/kvm/hyp/sysreg-sr.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_asm.h>
+#include <asm/kvm_hyp.h>
+
+/* Yes, this does nothing, on purpose */
+static void __hyp_text __sysreg_do_nothing(struct kvm_cpu_context *ctxt) { }
+
+/*
+ * Non-VHE: Both host and guest must save everything.
+ *
+ * VHE: Host must save tpidr*_el[01], actlr_el1, sp0, pc, pstate, and
+ * guest must save everything.
+ */
+
+static void __hyp_text __sysreg_save_common_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt->sys_regs[ACTLR_EL1]	= read_sysreg(actlr_el1);
+	ctxt->sys_regs[TPIDR_EL0]	= read_sysreg(tpidr_el0);
+	ctxt->sys_regs[TPIDRRO_EL0]	= read_sysreg(tpidrro_el0);
+	ctxt->sys_regs[TPIDR_EL1]	= read_sysreg(tpidr_el1);
+	ctxt->gp_regs.regs.sp		= read_sysreg(sp_el0);
+	ctxt->gp_regs.regs.pc		= read_sysreg_el2(elr);
+	ctxt->gp_regs.regs.pstate	= read_sysreg_el2(spsr);
+}
+
+static void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt)
+{
+	ctxt->sys_regs[MPIDR_EL1]	= read_sysreg(vmpidr_el2);
+	ctxt->sys_regs[CSSELR_EL1]	= read_sysreg(csselr_el1);
+	ctxt->sys_regs[SCTLR_EL1]	= read_sysreg_el1(sctlr);
+	ctxt->sys_regs[CPACR_EL1]	= read_sysreg_el1(cpacr);
+	ctxt->sys_regs[TTBR0_EL1]	= read_sysreg_el1(ttbr0);
+	ctxt->sys_regs[TTBR1_EL1]	= read_sysreg_el1(ttbr1);
+	ctxt->sys_regs[TCR_EL1]		= read_sysreg_el1(tcr);
+	ctxt->sys_regs[ESR_EL1]		= read_sysreg_el1(esr);
+	ctxt->sys_regs[AFSR0_EL1]	= read_sysreg_el1(afsr0);
+	ctxt->sys_regs[AFSR1_EL1]	= read_sysreg_el1(afsr1);
+	ctxt->sys_regs[FAR_EL1]		= read_sysreg_el1(far);
+	ctxt->sys_regs[MAIR_EL1]	= read_sysreg_el1(mair);
+	ctxt->sys_regs[VBAR_EL1]	= read_sysreg_el1(vbar);
+	ctxt->sys_regs[CONTEXTIDR_EL1]	= read_sysreg_el1(contextidr);
+	ctxt->sys_regs[AMAIR_EL1]	= read_sysreg_el1(amair);
+	ctxt->sys_regs[CNTKCTL_EL1]	= read_sysreg_el1(cntkctl);
+	ctxt->sys_regs[PAR_EL1]		= read_sysreg(par_el1);
+	ctxt->sys_regs[MDSCR_EL1]	= read_sysreg(mdscr_el1);
+
+	ctxt->gp_regs.sp_el1		= read_sysreg(sp_el1);
+	ctxt->gp_regs.elr_el1		= read_sysreg_el1(elr);
+	ctxt->gp_regs.spsr[KVM_SPSR_EL1]= read_sysreg_el1(spsr);
+}
+
+static hyp_alternate_select(__sysreg_call_save_host_state,
+			    __sysreg_save_state, __sysreg_do_nothing,
+			    ARM64_HAS_VIRT_HOST_EXTN);
+
+void __hyp_text __sysreg_save_host_state(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_call_save_host_state()(ctxt);
+	__sysreg_save_common_state(ctxt);
+}
+
+void __hyp_text __sysreg_save_guest_state(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_save_state(ctxt);
+	__sysreg_save_common_state(ctxt);
+}
+
+static void __hyp_text __sysreg_restore_common_state(struct kvm_cpu_context *ctxt)
+{
+	write_sysreg(ctxt->sys_regs[ACTLR_EL1],	  actlr_el1);
+	write_sysreg(ctxt->sys_regs[TPIDR_EL0],	  tpidr_el0);
+	write_sysreg(ctxt->sys_regs[TPIDRRO_EL0], tpidrro_el0);
+	write_sysreg(ctxt->sys_regs[TPIDR_EL1],	  tpidr_el1);
+	write_sysreg(ctxt->gp_regs.regs.sp,	  sp_el0);
+	write_sysreg_el2(ctxt->gp_regs.regs.pc,	  elr);
+	write_sysreg_el2(ctxt->gp_regs.regs.pstate, spsr);
+}
+
+static void __hyp_text __sysreg_restore_state(struct kvm_cpu_context *ctxt)
+{
+	write_sysreg(ctxt->sys_regs[MPIDR_EL1],		vmpidr_el2);
+	write_sysreg(ctxt->sys_regs[CSSELR_EL1],	csselr_el1);
+	write_sysreg_el1(ctxt->sys_regs[SCTLR_EL1],	sctlr);
+	write_sysreg_el1(ctxt->sys_regs[CPACR_EL1],	cpacr);
+	write_sysreg_el1(ctxt->sys_regs[TTBR0_EL1],	ttbr0);
+	write_sysreg_el1(ctxt->sys_regs[TTBR1_EL1],	ttbr1);
+	write_sysreg_el1(ctxt->sys_regs[TCR_EL1],	tcr);
+	write_sysreg_el1(ctxt->sys_regs[ESR_EL1],	esr);
+	write_sysreg_el1(ctxt->sys_regs[AFSR0_EL1],	afsr0);
+	write_sysreg_el1(ctxt->sys_regs[AFSR1_EL1],	afsr1);
+	write_sysreg_el1(ctxt->sys_regs[FAR_EL1],	far);
+	write_sysreg_el1(ctxt->sys_regs[MAIR_EL1],	mair);
+	write_sysreg_el1(ctxt->sys_regs[VBAR_EL1],	vbar);
+	write_sysreg_el1(ctxt->sys_regs[CONTEXTIDR_EL1],contextidr);
+	write_sysreg_el1(ctxt->sys_regs[AMAIR_EL1],	amair);
+	write_sysreg_el1(ctxt->sys_regs[CNTKCTL_EL1], 	cntkctl);
+	write_sysreg(ctxt->sys_regs[PAR_EL1],		par_el1);
+	write_sysreg(ctxt->sys_regs[MDSCR_EL1],		mdscr_el1);
+
+	write_sysreg(ctxt->gp_regs.sp_el1,		sp_el1);
+	write_sysreg_el1(ctxt->gp_regs.elr_el1,		elr);
+	write_sysreg_el1(ctxt->gp_regs.spsr[KVM_SPSR_EL1],spsr);
+}
+
+static hyp_alternate_select(__sysreg_call_restore_host_state,
+			    __sysreg_restore_state, __sysreg_do_nothing,
+			    ARM64_HAS_VIRT_HOST_EXTN);
+
+void __hyp_text __sysreg_restore_host_state(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_call_restore_host_state()(ctxt);
+	__sysreg_restore_common_state(ctxt);
+}
+
+void __hyp_text __sysreg_restore_guest_state(struct kvm_cpu_context *ctxt)
+{
+	__sysreg_restore_state(ctxt);
+	__sysreg_restore_common_state(ctxt);
+}
+
+void __hyp_text __sysreg32_save_state(struct kvm_vcpu *vcpu)
+{
+	u64 *spsr, *sysreg;
+
+	if (read_sysreg(hcr_el2) & HCR_RW)
+		return;
+
+	spsr = vcpu->arch.ctxt.gp_regs.spsr;
+	sysreg = vcpu->arch.ctxt.sys_regs;
+
+	spsr[KVM_SPSR_ABT] = read_sysreg(spsr_abt);
+	spsr[KVM_SPSR_UND] = read_sysreg(spsr_und);
+	spsr[KVM_SPSR_IRQ] = read_sysreg(spsr_irq);
+	spsr[KVM_SPSR_FIQ] = read_sysreg(spsr_fiq);
+
+	sysreg[DACR32_EL2] = read_sysreg(dacr32_el2);
+	sysreg[IFSR32_EL2] = read_sysreg(ifsr32_el2);
+
+	if (__fpsimd_enabled())
+		sysreg[FPEXC32_EL2] = read_sysreg(fpexc32_el2);
+
+	if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
+		sysreg[DBGVCR32_EL2] = read_sysreg(dbgvcr32_el2);
+}
+
+void __hyp_text __sysreg32_restore_state(struct kvm_vcpu *vcpu)
+{
+	u64 *spsr, *sysreg;
+
+	if (read_sysreg(hcr_el2) & HCR_RW)
+		return;
+
+	spsr = vcpu->arch.ctxt.gp_regs.spsr;
+	sysreg = vcpu->arch.ctxt.sys_regs;
+
+	write_sysreg(spsr[KVM_SPSR_ABT], spsr_abt);
+	write_sysreg(spsr[KVM_SPSR_UND], spsr_und);
+	write_sysreg(spsr[KVM_SPSR_IRQ], spsr_irq);
+	write_sysreg(spsr[KVM_SPSR_FIQ], spsr_fiq);
+
+	write_sysreg(sysreg[DACR32_EL2], dacr32_el2);
+	write_sysreg(sysreg[IFSR32_EL2], ifsr32_el2);
+
+	if (vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
+		write_sysreg(sysreg[DBGVCR32_EL2], dbgvcr32_el2);
+}
diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c
new file mode 100644
index 000000000000..be8177cdd3bf
--- /dev/null
+++ b/arch/arm64/kvm/hyp/tlb.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <asm/kvm_hyp.h>
+
+static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
+{
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	kvm = kern_hyp_va(kvm);
+	write_sysreg(kvm->arch.vttbr, vttbr_el2);
+	isb();
+
+	/*
+	 * We could do so much better if we had the VA as well.
+	 * Instead, we invalidate Stage-2 for this IPA, and the
+	 * whole of Stage-1. Weep...
+	 */
+	ipa >>= 12;
+	asm volatile("tlbi ipas2e1is, %0" : : "r" (ipa));
+
+	/*
+	 * We have to ensure completion of the invalidation at Stage-2,
+	 * since a table walk on another CPU could refill a TLB with a
+	 * complete (S1 + S2) walk based on the old Stage-2 mapping if
+	 * the Stage-1 invalidation happened first.
+	 */
+	dsb(ish);
+	asm volatile("tlbi vmalle1is" : : );
+	dsb(ish);
+	isb();
+
+	write_sysreg(0, vttbr_el2);
+}
+
+__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm,
+							    phys_addr_t ipa);
+
+static void __hyp_text __tlb_flush_vmid(struct kvm *kvm)
+{
+	dsb(ishst);
+
+	/* Switch to requested VMID */
+	kvm = kern_hyp_va(kvm);
+	write_sysreg(kvm->arch.vttbr, vttbr_el2);
+	isb();
+
+	asm volatile("tlbi vmalls12e1is" : : );
+	dsb(ish);
+	isb();
+
+	write_sysreg(0, vttbr_el2);
+}
+
+__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm);
+
+static void __hyp_text __tlb_flush_vm_context(void)
+{
+	dsb(ishst);
+	asm volatile("tlbi alle1is	\n"
+		     "ic ialluis	  ": : );
+	dsb(ish);
+}
+
+__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void);
diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c
new file mode 100644
index 000000000000..fff7cd42b3a3
--- /dev/null
+++ b/arch/arm64/kvm/hyp/vgic-v3-sr.c
@@ -0,0 +1,337 @@
+/*
+ * Copyright (C) 2012-2015 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/compiler.h>
+#include <linux/irqchip/arm-gic-v3.h>
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_hyp.h>
+
+#define vtr_to_max_lr_idx(v)		((v) & 0xf)
+#define vtr_to_nr_pri_bits(v)		(((u32)(v) >> 29) + 1)
+
+#define read_gicreg(r)							\
+	({								\
+		u64 reg;						\
+		asm volatile("mrs_s %0, " __stringify(r) : "=r" (reg));	\
+		reg;							\
+	})
+
+#define write_gicreg(v,r)						\
+	do {								\
+		u64 __val = (v);					\
+		asm volatile("msr_s " __stringify(r) ", %0" : : "r" (__val));\
+	} while (0)
+
+static u64 __hyp_text __gic_v3_get_lr(unsigned int lr)
+{
+	switch (lr & 0xf) {
+	case 0:
+		return read_gicreg(ICH_LR0_EL2);
+	case 1:
+		return read_gicreg(ICH_LR1_EL2);
+	case 2:
+		return read_gicreg(ICH_LR2_EL2);
+	case 3:
+		return read_gicreg(ICH_LR3_EL2);
+	case 4:
+		return read_gicreg(ICH_LR4_EL2);
+	case 5:
+		return read_gicreg(ICH_LR5_EL2);
+	case 6:
+		return read_gicreg(ICH_LR6_EL2);
+	case 7:
+		return read_gicreg(ICH_LR7_EL2);
+	case 8:
+		return read_gicreg(ICH_LR8_EL2);
+	case 9:
+		return read_gicreg(ICH_LR9_EL2);
+	case 10:
+		return read_gicreg(ICH_LR10_EL2);
+	case 11:
+		return read_gicreg(ICH_LR11_EL2);
+	case 12:
+		return read_gicreg(ICH_LR12_EL2);
+	case 13:
+		return read_gicreg(ICH_LR13_EL2);
+	case 14:
+		return read_gicreg(ICH_LR14_EL2);
+	case 15:
+		return read_gicreg(ICH_LR15_EL2);
+	}
+
+	unreachable();
+}
+
+static void __hyp_text __gic_v3_set_lr(u64 val, int lr)
+{
+	switch (lr & 0xf) {
+	case 0:
+		write_gicreg(val, ICH_LR0_EL2);
+		break;
+	case 1:
+		write_gicreg(val, ICH_LR1_EL2);
+		break;
+	case 2:
+		write_gicreg(val, ICH_LR2_EL2);
+		break;
+	case 3:
+		write_gicreg(val, ICH_LR3_EL2);
+		break;
+	case 4:
+		write_gicreg(val, ICH_LR4_EL2);
+		break;
+	case 5:
+		write_gicreg(val, ICH_LR5_EL2);
+		break;
+	case 6:
+		write_gicreg(val, ICH_LR6_EL2);
+		break;
+	case 7:
+		write_gicreg(val, ICH_LR7_EL2);
+		break;
+	case 8:
+		write_gicreg(val, ICH_LR8_EL2);
+		break;
+	case 9:
+		write_gicreg(val, ICH_LR9_EL2);
+		break;
+	case 10:
+		write_gicreg(val, ICH_LR10_EL2);
+		break;
+	case 11:
+		write_gicreg(val, ICH_LR11_EL2);
+		break;
+	case 12:
+		write_gicreg(val, ICH_LR12_EL2);
+		break;
+	case 13:
+		write_gicreg(val, ICH_LR13_EL2);
+		break;
+	case 14:
+		write_gicreg(val, ICH_LR14_EL2);
+		break;
+	case 15:
+		write_gicreg(val, ICH_LR15_EL2);
+		break;
+	}
+}
+
+static void __hyp_text save_maint_int_state(struct kvm_vcpu *vcpu, int nr_lr)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+	int i;
+	bool expect_mi;
+
+	expect_mi = !!(cpu_if->vgic_hcr & ICH_HCR_UIE);
+
+	for (i = 0; i < nr_lr; i++) {
+		if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i)))
+				continue;
+
+		expect_mi |= (!(cpu_if->vgic_lr[i] & ICH_LR_HW) &&
+			      (cpu_if->vgic_lr[i] & ICH_LR_EOI));
+	}
+
+	if (expect_mi) {
+		cpu_if->vgic_misr  = read_gicreg(ICH_MISR_EL2);
+
+		if (cpu_if->vgic_misr & ICH_MISR_EOI)
+			cpu_if->vgic_eisr = read_gicreg(ICH_EISR_EL2);
+		else
+			cpu_if->vgic_eisr = 0;
+	} else {
+		cpu_if->vgic_misr = 0;
+		cpu_if->vgic_eisr = 0;
+	}
+}
+
+void __hyp_text __vgic_v3_save_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+	u64 val;
+
+	/*
+	 * Make sure stores to the GIC via the memory mapped interface
+	 * are now visible to the system register interface.
+	 */
+	dsb(st);
+
+	cpu_if->vgic_vmcr  = read_gicreg(ICH_VMCR_EL2);
+
+	if (vcpu->arch.vgic_cpu.live_lrs) {
+		int i;
+		u32 max_lr_idx, nr_pri_bits;
+
+		cpu_if->vgic_elrsr = read_gicreg(ICH_ELSR_EL2);
+
+		write_gicreg(0, ICH_HCR_EL2);
+		val = read_gicreg(ICH_VTR_EL2);
+		max_lr_idx = vtr_to_max_lr_idx(val);
+		nr_pri_bits = vtr_to_nr_pri_bits(val);
+
+		save_maint_int_state(vcpu, max_lr_idx + 1);
+
+		for (i = 0; i <= max_lr_idx; i++) {
+			if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i)))
+				continue;
+
+			if (cpu_if->vgic_elrsr & (1 << i)) {
+				cpu_if->vgic_lr[i] &= ~ICH_LR_STATE;
+				continue;
+			}
+
+			cpu_if->vgic_lr[i] = __gic_v3_get_lr(i);
+			__gic_v3_set_lr(0, i);
+		}
+
+		switch (nr_pri_bits) {
+		case 7:
+			cpu_if->vgic_ap0r[3] = read_gicreg(ICH_AP0R3_EL2);
+			cpu_if->vgic_ap0r[2] = read_gicreg(ICH_AP0R2_EL2);
+		case 6:
+			cpu_if->vgic_ap0r[1] = read_gicreg(ICH_AP0R1_EL2);
+		default:
+			cpu_if->vgic_ap0r[0] = read_gicreg(ICH_AP0R0_EL2);
+		}
+
+		switch (nr_pri_bits) {
+		case 7:
+			cpu_if->vgic_ap1r[3] = read_gicreg(ICH_AP1R3_EL2);
+			cpu_if->vgic_ap1r[2] = read_gicreg(ICH_AP1R2_EL2);
+		case 6:
+			cpu_if->vgic_ap1r[1] = read_gicreg(ICH_AP1R1_EL2);
+		default:
+			cpu_if->vgic_ap1r[0] = read_gicreg(ICH_AP1R0_EL2);
+		}
+
+		vcpu->arch.vgic_cpu.live_lrs = 0;
+	} else {
+		cpu_if->vgic_misr  = 0;
+		cpu_if->vgic_eisr  = 0;
+		cpu_if->vgic_elrsr = 0xffff;
+		cpu_if->vgic_ap0r[0] = 0;
+		cpu_if->vgic_ap0r[1] = 0;
+		cpu_if->vgic_ap0r[2] = 0;
+		cpu_if->vgic_ap0r[3] = 0;
+		cpu_if->vgic_ap1r[0] = 0;
+		cpu_if->vgic_ap1r[1] = 0;
+		cpu_if->vgic_ap1r[2] = 0;
+		cpu_if->vgic_ap1r[3] = 0;
+	}
+
+	val = read_gicreg(ICC_SRE_EL2);
+	write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2);
+	isb(); /* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
+	write_gicreg(1, ICC_SRE_EL1);
+}
+
+void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
+{
+	struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3;
+	u64 val;
+	u32 max_lr_idx, nr_pri_bits;
+	u16 live_lrs = 0;
+	int i;
+
+	/*
+	 * VFIQEn is RES1 if ICC_SRE_EL1.SRE is 1. This causes a
+	 * Group0 interrupt (as generated in GICv2 mode) to be
+	 * delivered as a FIQ to the guest, with potentially fatal
+	 * consequences. So we must make sure that ICC_SRE_EL1 has
+	 * been actually programmed with the value we want before
+	 * starting to mess with the rest of the GIC.
+	 */
+	write_gicreg(cpu_if->vgic_sre, ICC_SRE_EL1);
+	isb();
+
+	val = read_gicreg(ICH_VTR_EL2);
+	max_lr_idx = vtr_to_max_lr_idx(val);
+	nr_pri_bits = vtr_to_nr_pri_bits(val);
+
+	for (i = 0; i <= max_lr_idx; i++) {
+		if (cpu_if->vgic_lr[i] & ICH_LR_STATE)
+			live_lrs |= (1 << i);
+	}
+
+	write_gicreg(cpu_if->vgic_vmcr, ICH_VMCR_EL2);
+
+	if (live_lrs) {
+		write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2);
+
+		switch (nr_pri_bits) {
+		case 7:
+			write_gicreg(cpu_if->vgic_ap0r[3], ICH_AP0R3_EL2);
+			write_gicreg(cpu_if->vgic_ap0r[2], ICH_AP0R2_EL2);
+		case 6:
+			write_gicreg(cpu_if->vgic_ap0r[1], ICH_AP0R1_EL2);
+		default:
+			write_gicreg(cpu_if->vgic_ap0r[0], ICH_AP0R0_EL2);
+		}
+
+		switch (nr_pri_bits) {
+		case 7:
+			write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2);
+			write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2);
+		case 6:
+			write_gicreg(cpu_if->vgic_ap1r[1], ICH_AP1R1_EL2);
+		default:
+			write_gicreg(cpu_if->vgic_ap1r[0], ICH_AP1R0_EL2);
+		}
+
+		for (i = 0; i <= max_lr_idx; i++) {
+			if (!(live_lrs & (1 << i)))
+				continue;
+
+			__gic_v3_set_lr(cpu_if->vgic_lr[i], i);
+		}
+	}
+
+	/*
+	 * Ensures that the above will have reached the
+	 * (re)distributors. This ensure the guest will read the
+	 * correct values from the memory-mapped interface.
+	 */
+	isb();
+	dsb(sy);
+	vcpu->arch.vgic_cpu.live_lrs = live_lrs;
+
+	/*
+	 * Prevent the guest from touching the GIC system registers if
+	 * SRE isn't enabled for GICv3 emulation.
+	 */
+	if (!cpu_if->vgic_sre) {
+		write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
+			     ICC_SRE_EL2);
+	}
+}
+
+void __hyp_text __vgic_v3_init_lrs(void)
+{
+	int max_lr_idx = vtr_to_max_lr_idx(read_gicreg(ICH_VTR_EL2));
+	int i;
+
+	for (i = 0; i <= max_lr_idx; i++)
+		__gic_v3_set_lr(0, i);
+}
+
+static u64 __hyp_text __vgic_v3_read_ich_vtr_el2(void)
+{
+	return read_gicreg(ICH_VTR_EL2);
+}
+
+__alias(__vgic_v3_read_ich_vtr_el2) u64 __vgic_v3_get_ich_vtr_el2(void);
diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c
index 85c57158dcd9..4d1ac81870d2 100644
--- a/arch/arm64/kvm/inject_fault.c
+++ b/arch/arm64/kvm/inject_fault.c
@@ -27,7 +27,11 @@
 
 #define PSTATE_FAULT_BITS_64 	(PSR_MODE_EL1h | PSR_A_BIT | PSR_F_BIT | \
 				 PSR_I_BIT | PSR_D_BIT)
-#define EL1_EXCEPT_SYNC_OFFSET	0x200
+
+#define CURRENT_EL_SP_EL0_VECTOR	0x0
+#define CURRENT_EL_SP_ELx_VECTOR	0x200
+#define LOWER_EL_AArch64_VECTOR		0x400
+#define LOWER_EL_AArch32_VECTOR		0x600
 
 static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)
 {
@@ -48,7 +52,7 @@ static void prepare_fault32(struct kvm_vcpu *vcpu, u32 mode, u32 vect_offset)
 
 	/* Note: These now point to the banked copies */
 	*vcpu_spsr(vcpu) = new_spsr_value;
-	*vcpu_reg(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
+	*vcpu_reg32(vcpu, 14) = *vcpu_pc(vcpu) + return_offset;
 
 	/* Branch to exception vector */
 	if (sctlr & (1 << 13))
@@ -97,6 +101,34 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt,
 		*fsr = 0x14;
 }
 
+enum exception_type {
+	except_type_sync	= 0,
+	except_type_irq		= 0x80,
+	except_type_fiq		= 0x100,
+	except_type_serror	= 0x180,
+};
+
+static u64 get_except_vector(struct kvm_vcpu *vcpu, enum exception_type type)
+{
+	u64 exc_offset;
+
+	switch (*vcpu_cpsr(vcpu) & (PSR_MODE_MASK | PSR_MODE32_BIT)) {
+	case PSR_MODE_EL1t:
+		exc_offset = CURRENT_EL_SP_EL0_VECTOR;
+		break;
+	case PSR_MODE_EL1h:
+		exc_offset = CURRENT_EL_SP_ELx_VECTOR;
+		break;
+	case PSR_MODE_EL0t:
+		exc_offset = LOWER_EL_AArch64_VECTOR;
+		break;
+	default:
+		exc_offset = LOWER_EL_AArch32_VECTOR;
+	}
+
+	return vcpu_sys_reg(vcpu, VBAR_EL1) + exc_offset + type;
+}
+
 static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr)
 {
 	unsigned long cpsr = *vcpu_cpsr(vcpu);
@@ -108,8 +140,8 @@ static void inject_abt64(struct kvm_vcpu *vcpu, bool is_iabt, unsigned long addr
 	*vcpu_spsr(vcpu) = cpsr;
 	*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);
 
+	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
-	*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;
 
 	vcpu_sys_reg(vcpu, FAR_EL1) = addr;
 
@@ -143,8 +175,8 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
 	*vcpu_spsr(vcpu) = cpsr;
 	*vcpu_elr_el1(vcpu) = *vcpu_pc(vcpu);
 
+	*vcpu_pc(vcpu) = get_except_vector(vcpu, except_type_sync);
 	*vcpu_cpsr(vcpu) = PSTATE_FAULT_BITS_64;
-	*vcpu_pc(vcpu) = vcpu_sys_reg(vcpu, VBAR_EL1) + EL1_EXCEPT_SYNC_OFFSET;
 
 	/*
 	 * Build an unknown exception, depending on the instruction
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index f34745cb3d23..9677bf069bcc 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -77,7 +77,11 @@ int kvm_arch_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_GUEST_DEBUG_HW_WPS:
 		r = get_num_wrps();
 		break;
+	case KVM_CAP_ARM_PMU_V3:
+		r = kvm_arm_support_pmu_v3();
+		break;
 	case KVM_CAP_SET_GUEST_DEBUG:
+	case KVM_CAP_VCPU_ATTRIBUTES:
 		r = 1;
 		break;
 	default:
@@ -120,6 +124,9 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	/* Reset system registers */
 	kvm_reset_sys_regs(vcpu);
 
+	/* Reset PMU */
+	kvm_pmu_vcpu_reset(vcpu);
+
 	/* Reset timer */
 	return kvm_timer_vcpu_reset(vcpu, cpu_vtimer_irq);
 }
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 87a64e8db04c..7bbe3ff02602 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -20,6 +20,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/bsearch.h>
 #include <linux/kvm_host.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
@@ -29,10 +30,12 @@
 #include <asm/debug-monitors.h>
 #include <asm/esr.h>
 #include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
 #include <asm/kvm_coproc.h>
 #include <asm/kvm_emulate.h>
 #include <asm/kvm_host.h>
 #include <asm/kvm_mmu.h>
+#include <asm/perf_event.h>
 
 #include <trace/events/kvm.h>
 
@@ -78,7 +81,7 @@ static u32 get_ccsidr(u32 csselr)
  * See note at ARMv7 ARM B1.14.4 (TL;DR: S/W ops are not easily virtualized).
  */
 static bool access_dcsw(struct kvm_vcpu *vcpu,
-			const struct sys_reg_params *p,
+			struct sys_reg_params *p,
 			const struct sys_reg_desc *r)
 {
 	if (!p->is_write)
@@ -94,21 +97,19 @@ static bool access_dcsw(struct kvm_vcpu *vcpu,
  * sys_regs and leave it in complete control of the caches.
  */
 static bool access_vm_reg(struct kvm_vcpu *vcpu,
-			  const struct sys_reg_params *p,
+			  struct sys_reg_params *p,
 			  const struct sys_reg_desc *r)
 {
-	unsigned long val;
 	bool was_enabled = vcpu_has_cache_enabled(vcpu);
 
 	BUG_ON(!p->is_write);
 
-	val = *vcpu_reg(vcpu, p->Rt);
 	if (!p->is_aarch32) {
-		vcpu_sys_reg(vcpu, r->reg) = val;
+		vcpu_sys_reg(vcpu, r->reg) = p->regval;
 	} else {
 		if (!p->is_32bit)
-			vcpu_cp15_64_high(vcpu, r->reg) = val >> 32;
-		vcpu_cp15_64_low(vcpu, r->reg) = val & 0xffffffffUL;
+			vcpu_cp15_64_high(vcpu, r->reg) = upper_32_bits(p->regval);
+		vcpu_cp15_64_low(vcpu, r->reg) = lower_32_bits(p->regval);
 	}
 
 	kvm_toggle_cache(vcpu, was_enabled);
@@ -122,22 +123,19 @@ static bool access_vm_reg(struct kvm_vcpu *vcpu,
  * for both AArch64 and AArch32 accesses.
  */
 static bool access_gic_sgi(struct kvm_vcpu *vcpu,
-			   const struct sys_reg_params *p,
+			   struct sys_reg_params *p,
 			   const struct sys_reg_desc *r)
 {
-	u64 val;
-
 	if (!p->is_write)
 		return read_from_write_only(vcpu, p);
 
-	val = *vcpu_reg(vcpu, p->Rt);
-	vgic_v3_dispatch_sgi(vcpu, val);
+	vgic_v3_dispatch_sgi(vcpu, p->regval);
 
 	return true;
 }
 
 static bool trap_raz_wi(struct kvm_vcpu *vcpu,
-			const struct sys_reg_params *p,
+			struct sys_reg_params *p,
 			const struct sys_reg_desc *r)
 {
 	if (p->is_write)
@@ -147,19 +145,19 @@ static bool trap_raz_wi(struct kvm_vcpu *vcpu,
 }
 
 static bool trap_oslsr_el1(struct kvm_vcpu *vcpu,
-			   const struct sys_reg_params *p,
+			   struct sys_reg_params *p,
 			   const struct sys_reg_desc *r)
 {
 	if (p->is_write) {
 		return ignore_write(vcpu, p);
 	} else {
-		*vcpu_reg(vcpu, p->Rt) = (1 << 3);
+		p->regval = (1 << 3);
 		return true;
 	}
 }
 
 static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
-				   const struct sys_reg_params *p,
+				   struct sys_reg_params *p,
 				   const struct sys_reg_desc *r)
 {
 	if (p->is_write) {
@@ -167,7 +165,7 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
 	} else {
 		u32 val;
 		asm volatile("mrs %0, dbgauthstatus_el1" : "=r" (val));
-		*vcpu_reg(vcpu, p->Rt) = val;
+		p->regval = val;
 		return true;
 	}
 }
@@ -200,17 +198,17 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
  *   now use the debug registers.
  */
 static bool trap_debug_regs(struct kvm_vcpu *vcpu,
-			    const struct sys_reg_params *p,
+			    struct sys_reg_params *p,
 			    const struct sys_reg_desc *r)
 {
 	if (p->is_write) {
-		vcpu_sys_reg(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
+		vcpu_sys_reg(vcpu, r->reg) = p->regval;
 		vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
 	} else {
-		*vcpu_reg(vcpu, p->Rt) = vcpu_sys_reg(vcpu, r->reg);
+		p->regval = vcpu_sys_reg(vcpu, r->reg);
 	}
 
-	trace_trap_reg(__func__, r->reg, p->is_write, *vcpu_reg(vcpu, p->Rt));
+	trace_trap_reg(__func__, r->reg, p->is_write, p->regval);
 
 	return true;
 }
@@ -224,11 +222,11 @@ static bool trap_debug_regs(struct kvm_vcpu *vcpu,
  * All writes will set the KVM_ARM64_DEBUG_DIRTY flag to ensure the
  * hyp.S code switches between host and guest values in future.
  */
-static inline void reg_to_dbg(struct kvm_vcpu *vcpu,
-			      const struct sys_reg_params *p,
-			      u64 *dbg_reg)
+static void reg_to_dbg(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *p,
+		       u64 *dbg_reg)
 {
-	u64 val = *vcpu_reg(vcpu, p->Rt);
+	u64 val = p->regval;
 
 	if (p->is_32bit) {
 		val &= 0xffffffffUL;
@@ -239,21 +237,18 @@ static inline void reg_to_dbg(struct kvm_vcpu *vcpu,
 	vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
 }
 
-static inline void dbg_to_reg(struct kvm_vcpu *vcpu,
-			      const struct sys_reg_params *p,
-			      u64 *dbg_reg)
+static void dbg_to_reg(struct kvm_vcpu *vcpu,
+		       struct sys_reg_params *p,
+		       u64 *dbg_reg)
 {
-	u64 val = *dbg_reg;
-
+	p->regval = *dbg_reg;
 	if (p->is_32bit)
-		val &= 0xffffffffUL;
-
-	*vcpu_reg(vcpu, p->Rt) = val;
+		p->regval &= 0xffffffffUL;
 }
 
-static inline bool trap_bvr(struct kvm_vcpu *vcpu,
-			    const struct sys_reg_params *p,
-			    const struct sys_reg_desc *rd)
+static bool trap_bvr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
 {
 	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
 
@@ -287,15 +282,15 @@ static int get_bvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	return 0;
 }
 
-static inline void reset_bvr(struct kvm_vcpu *vcpu,
-			     const struct sys_reg_desc *rd)
+static void reset_bvr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
 {
 	vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg] = rd->val;
 }
 
-static inline bool trap_bcr(struct kvm_vcpu *vcpu,
-			    const struct sys_reg_params *p,
-			    const struct sys_reg_desc *rd)
+static bool trap_bcr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
 {
 	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg];
 
@@ -330,15 +325,15 @@ static int get_bcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	return 0;
 }
 
-static inline void reset_bcr(struct kvm_vcpu *vcpu,
-			     const struct sys_reg_desc *rd)
+static void reset_bcr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
 {
 	vcpu->arch.vcpu_debug_state.dbg_bcr[rd->reg] = rd->val;
 }
 
-static inline bool trap_wvr(struct kvm_vcpu *vcpu,
-			    const struct sys_reg_params *p,
-			    const struct sys_reg_desc *rd)
+static bool trap_wvr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
 {
 	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg];
 
@@ -373,15 +368,15 @@ static int get_wvr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	return 0;
 }
 
-static inline void reset_wvr(struct kvm_vcpu *vcpu,
-			     const struct sys_reg_desc *rd)
+static void reset_wvr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
 {
 	vcpu->arch.vcpu_debug_state.dbg_wvr[rd->reg] = rd->val;
 }
 
-static inline bool trap_wcr(struct kvm_vcpu *vcpu,
-			    const struct sys_reg_params *p,
-			    const struct sys_reg_desc *rd)
+static bool trap_wcr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
 {
 	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg];
 
@@ -415,8 +410,8 @@ static int get_wcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	return 0;
 }
 
-static inline void reset_wcr(struct kvm_vcpu *vcpu,
-			     const struct sys_reg_desc *rd)
+static void reset_wcr(struct kvm_vcpu *vcpu,
+		      const struct sys_reg_desc *rd)
 {
 	vcpu->arch.vcpu_debug_state.dbg_wcr[rd->reg] = rd->val;
 }
@@ -446,6 +441,344 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	vcpu_sys_reg(vcpu, MPIDR_EL1) = (1ULL << 31) | mpidr;
 }
 
+static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 pmcr, val;
+
+	asm volatile("mrs %0, pmcr_el0\n" : "=r" (pmcr));
+	/* Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) is reset to UNKNOWN
+	 * except PMCR.E resetting to zero.
+	 */
+	val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
+	       | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E);
+	vcpu_sys_reg(vcpu, PMCR_EL0) = val;
+}
+
+static bool pmu_access_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	u64 reg = vcpu_sys_reg(vcpu, PMUSERENR_EL0);
+
+	return !((reg & ARMV8_PMU_USERENR_EN) || vcpu_mode_priv(vcpu));
+}
+
+static bool pmu_write_swinc_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	u64 reg = vcpu_sys_reg(vcpu, PMUSERENR_EL0);
+
+	return !((reg & (ARMV8_PMU_USERENR_SW | ARMV8_PMU_USERENR_EN))
+		 || vcpu_mode_priv(vcpu));
+}
+
+static bool pmu_access_cycle_counter_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	u64 reg = vcpu_sys_reg(vcpu, PMUSERENR_EL0);
+
+	return !((reg & (ARMV8_PMU_USERENR_CR | ARMV8_PMU_USERENR_EN))
+		 || vcpu_mode_priv(vcpu));
+}
+
+static bool pmu_access_event_counter_el0_disabled(struct kvm_vcpu *vcpu)
+{
+	u64 reg = vcpu_sys_reg(vcpu, PMUSERENR_EL0);
+
+	return !((reg & (ARMV8_PMU_USERENR_ER | ARMV8_PMU_USERENR_EN))
+		 || vcpu_mode_priv(vcpu));
+}
+
+static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			const struct sys_reg_desc *r)
+{
+	u64 val;
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	if (p->is_write) {
+		/* Only update writeable bits of PMCR */
+		val = vcpu_sys_reg(vcpu, PMCR_EL0);
+		val &= ~ARMV8_PMU_PMCR_MASK;
+		val |= p->regval & ARMV8_PMU_PMCR_MASK;
+		vcpu_sys_reg(vcpu, PMCR_EL0) = val;
+		kvm_pmu_handle_pmcr(vcpu, val);
+	} else {
+		/* PMCR.P & PMCR.C are RAZ */
+		val = vcpu_sys_reg(vcpu, PMCR_EL0)
+		      & ~(ARMV8_PMU_PMCR_P | ARMV8_PMU_PMCR_C);
+		p->regval = val;
+	}
+
+	return true;
+}
+
+static bool access_pmselr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (pmu_access_event_counter_el0_disabled(vcpu))
+		return false;
+
+	if (p->is_write)
+		vcpu_sys_reg(vcpu, PMSELR_EL0) = p->regval;
+	else
+		/* return PMSELR.SEL field */
+		p->regval = vcpu_sys_reg(vcpu, PMSELR_EL0)
+			    & ARMV8_PMU_COUNTER_MASK;
+
+	return true;
+}
+
+static bool access_pmceid(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			  const struct sys_reg_desc *r)
+{
+	u64 pmceid;
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	BUG_ON(p->is_write);
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	if (!(p->Op2 & 1))
+		asm volatile("mrs %0, pmceid0_el0\n" : "=r" (pmceid));
+	else
+		asm volatile("mrs %0, pmceid1_el0\n" : "=r" (pmceid));
+
+	p->regval = pmceid;
+
+	return true;
+}
+
+static bool pmu_counter_idx_valid(struct kvm_vcpu *vcpu, u64 idx)
+{
+	u64 pmcr, val;
+
+	pmcr = vcpu_sys_reg(vcpu, PMCR_EL0);
+	val = (pmcr >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
+	if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX)
+		return false;
+
+	return true;
+}
+
+static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
+			      struct sys_reg_params *p,
+			      const struct sys_reg_desc *r)
+{
+	u64 idx;
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (r->CRn == 9 && r->CRm == 13) {
+		if (r->Op2 == 2) {
+			/* PMXEVCNTR_EL0 */
+			if (pmu_access_event_counter_el0_disabled(vcpu))
+				return false;
+
+			idx = vcpu_sys_reg(vcpu, PMSELR_EL0)
+			      & ARMV8_PMU_COUNTER_MASK;
+		} else if (r->Op2 == 0) {
+			/* PMCCNTR_EL0 */
+			if (pmu_access_cycle_counter_el0_disabled(vcpu))
+				return false;
+
+			idx = ARMV8_PMU_CYCLE_IDX;
+		} else {
+			BUG();
+		}
+	} else if (r->CRn == 14 && (r->CRm & 12) == 8) {
+		/* PMEVCNTRn_EL0 */
+		if (pmu_access_event_counter_el0_disabled(vcpu))
+			return false;
+
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+	} else {
+		BUG();
+	}
+
+	if (!pmu_counter_idx_valid(vcpu, idx))
+		return false;
+
+	if (p->is_write) {
+		if (pmu_access_el0_disabled(vcpu))
+			return false;
+
+		kvm_pmu_set_counter_value(vcpu, idx, p->regval);
+	} else {
+		p->regval = kvm_pmu_get_counter_value(vcpu, idx);
+	}
+
+	return true;
+}
+
+static bool access_pmu_evtyper(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			       const struct sys_reg_desc *r)
+{
+	u64 idx, reg;
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	if (r->CRn == 9 && r->CRm == 13 && r->Op2 == 1) {
+		/* PMXEVTYPER_EL0 */
+		idx = vcpu_sys_reg(vcpu, PMSELR_EL0) & ARMV8_PMU_COUNTER_MASK;
+		reg = PMEVTYPER0_EL0 + idx;
+	} else if (r->CRn == 14 && (r->CRm & 12) == 12) {
+		idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
+		if (idx == ARMV8_PMU_CYCLE_IDX)
+			reg = PMCCFILTR_EL0;
+		else
+			/* PMEVTYPERn_EL0 */
+			reg = PMEVTYPER0_EL0 + idx;
+	} else {
+		BUG();
+	}
+
+	if (!pmu_counter_idx_valid(vcpu, idx))
+		return false;
+
+	if (p->is_write) {
+		kvm_pmu_set_counter_event_type(vcpu, p->regval, idx);
+		vcpu_sys_reg(vcpu, reg) = p->regval & ARMV8_PMU_EVTYPE_MASK;
+	} else {
+		p->regval = vcpu_sys_reg(vcpu, reg) & ARMV8_PMU_EVTYPE_MASK;
+	}
+
+	return true;
+}
+
+static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	u64 val, mask;
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	mask = kvm_pmu_valid_counter_mask(vcpu);
+	if (p->is_write) {
+		val = p->regval & mask;
+		if (r->Op2 & 0x1) {
+			/* accessing PMCNTENSET_EL0 */
+			vcpu_sys_reg(vcpu, PMCNTENSET_EL0) |= val;
+			kvm_pmu_enable_counter(vcpu, val);
+		} else {
+			/* accessing PMCNTENCLR_EL0 */
+			vcpu_sys_reg(vcpu, PMCNTENSET_EL0) &= ~val;
+			kvm_pmu_disable_counter(vcpu, val);
+		}
+	} else {
+		p->regval = vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask;
+	}
+
+	return true;
+}
+
+static bool access_pminten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	u64 mask = kvm_pmu_valid_counter_mask(vcpu);
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (!vcpu_mode_priv(vcpu))
+		return false;
+
+	if (p->is_write) {
+		u64 val = p->regval & mask;
+
+		if (r->Op2 & 0x1)
+			/* accessing PMINTENSET_EL1 */
+			vcpu_sys_reg(vcpu, PMINTENSET_EL1) |= val;
+		else
+			/* accessing PMINTENCLR_EL1 */
+			vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val;
+	} else {
+		p->regval = vcpu_sys_reg(vcpu, PMINTENSET_EL1) & mask;
+	}
+
+	return true;
+}
+
+static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	u64 mask = kvm_pmu_valid_counter_mask(vcpu);
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (pmu_access_el0_disabled(vcpu))
+		return false;
+
+	if (p->is_write) {
+		if (r->CRm & 0x2)
+			/* accessing PMOVSSET_EL0 */
+			kvm_pmu_overflow_set(vcpu, p->regval & mask);
+		else
+			/* accessing PMOVSCLR_EL0 */
+			vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask);
+	} else {
+		p->regval = vcpu_sys_reg(vcpu, PMOVSSET_EL0) & mask;
+	}
+
+	return true;
+}
+
+static bool access_pmswinc(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	u64 mask;
+
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (pmu_write_swinc_el0_disabled(vcpu))
+		return false;
+
+	if (p->is_write) {
+		mask = kvm_pmu_valid_counter_mask(vcpu);
+		kvm_pmu_software_increment(vcpu, p->regval & mask);
+		return true;
+	}
+
+	return false;
+}
+
+static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
+			     const struct sys_reg_desc *r)
+{
+	if (!kvm_arm_pmu_v3_ready(vcpu))
+		return trap_raz_wi(vcpu, p, r);
+
+	if (p->is_write) {
+		if (!vcpu_mode_priv(vcpu))
+			return false;
+
+		vcpu_sys_reg(vcpu, PMUSERENR_EL0) = p->regval
+						    & ARMV8_PMU_USERENR_MASK;
+	} else {
+		p->regval = vcpu_sys_reg(vcpu, PMUSERENR_EL0)
+			    & ARMV8_PMU_USERENR_MASK;
+	}
+
+	return true;
+}
+
 /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
 #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
 	/* DBGBVRn_EL1 */						\
@@ -461,6 +794,20 @@ static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	{ Op0(0b10), Op1(0b000), CRn(0b0000), CRm((n)), Op2(0b111),	\
 	  trap_wcr, reset_wcr, n, 0,  get_wcr, set_wcr }
 
+/* Macro to expand the PMEVCNTRn_EL0 register */
+#define PMU_PMEVCNTR_EL0(n)						\
+	/* PMEVCNTRn_EL0 */						\
+	{ Op0(0b11), Op1(0b011), CRn(0b1110),				\
+	  CRm((0b1000 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	  access_pmu_evcntr, reset_unknown, (PMEVCNTR0_EL0 + n), }
+
+/* Macro to expand the PMEVTYPERn_EL0 register */
+#define PMU_PMEVTYPER_EL0(n)						\
+	/* PMEVTYPERn_EL0 */						\
+	{ Op0(0b11), Op1(0b011), CRn(0b1110),				\
+	  CRm((0b1100 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	  access_pmu_evtyper, reset_unknown, (PMEVTYPER0_EL0 + n), }
+
 /*
  * Architected system registers.
  * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
@@ -590,10 +937,10 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	/* PMINTENSET_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b001),
-	  trap_raz_wi },
+	  access_pminten, reset_unknown, PMINTENSET_EL1 },
 	/* PMINTENCLR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1001), CRm(0b1110), Op2(0b010),
-	  trap_raz_wi },
+	  access_pminten, NULL, PMINTENSET_EL1 },
 
 	/* MAIR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1010), CRm(0b0010), Op2(0b000),
@@ -630,43 +977,46 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 
 	/* PMCR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b000),
-	  trap_raz_wi },
+	  access_pmcr, reset_pmcr, },
 	/* PMCNTENSET_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b001),
-	  trap_raz_wi },
+	  access_pmcnten, reset_unknown, PMCNTENSET_EL0 },
 	/* PMCNTENCLR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b010),
-	  trap_raz_wi },
+	  access_pmcnten, NULL, PMCNTENSET_EL0 },
 	/* PMOVSCLR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b011),
-	  trap_raz_wi },
+	  access_pmovs, NULL, PMOVSSET_EL0 },
 	/* PMSWINC_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b100),
-	  trap_raz_wi },
+	  access_pmswinc, reset_unknown, PMSWINC_EL0 },
 	/* PMSELR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b101),
-	  trap_raz_wi },
+	  access_pmselr, reset_unknown, PMSELR_EL0 },
 	/* PMCEID0_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b110),
-	  trap_raz_wi },
+	  access_pmceid },
 	/* PMCEID1_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1100), Op2(0b111),
-	  trap_raz_wi },
+	  access_pmceid },
 	/* PMCCNTR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b000),
-	  trap_raz_wi },
+	  access_pmu_evcntr, reset_unknown, PMCCNTR_EL0 },
 	/* PMXEVTYPER_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b001),
-	  trap_raz_wi },
+	  access_pmu_evtyper },
 	/* PMXEVCNTR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1101), Op2(0b010),
-	  trap_raz_wi },
-	/* PMUSERENR_EL0 */
+	  access_pmu_evcntr },
+	/* PMUSERENR_EL0
+	 * This register resets as unknown in 64bit mode while it resets as zero
+	 * in 32bit mode. Here we choose to reset it as zero for consistency.
+	 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b000),
-	  trap_raz_wi },
+	  access_pmuserenr, reset_val, PMUSERENR_EL0, 0 },
 	/* PMOVSSET_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1001), CRm(0b1110), Op2(0b011),
-	  trap_raz_wi },
+	  access_pmovs, reset_unknown, PMOVSSET_EL0 },
 
 	/* TPIDR_EL0 */
 	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b010),
@@ -675,6 +1025,77 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ Op0(0b11), Op1(0b011), CRn(0b1101), CRm(0b0000), Op2(0b011),
 	  NULL, reset_unknown, TPIDRRO_EL0 },
 
+	/* PMEVCNTRn_EL0 */
+	PMU_PMEVCNTR_EL0(0),
+	PMU_PMEVCNTR_EL0(1),
+	PMU_PMEVCNTR_EL0(2),
+	PMU_PMEVCNTR_EL0(3),
+	PMU_PMEVCNTR_EL0(4),
+	PMU_PMEVCNTR_EL0(5),
+	PMU_PMEVCNTR_EL0(6),
+	PMU_PMEVCNTR_EL0(7),
+	PMU_PMEVCNTR_EL0(8),
+	PMU_PMEVCNTR_EL0(9),
+	PMU_PMEVCNTR_EL0(10),
+	PMU_PMEVCNTR_EL0(11),
+	PMU_PMEVCNTR_EL0(12),
+	PMU_PMEVCNTR_EL0(13),
+	PMU_PMEVCNTR_EL0(14),
+	PMU_PMEVCNTR_EL0(15),
+	PMU_PMEVCNTR_EL0(16),
+	PMU_PMEVCNTR_EL0(17),
+	PMU_PMEVCNTR_EL0(18),
+	PMU_PMEVCNTR_EL0(19),
+	PMU_PMEVCNTR_EL0(20),
+	PMU_PMEVCNTR_EL0(21),
+	PMU_PMEVCNTR_EL0(22),
+	PMU_PMEVCNTR_EL0(23),
+	PMU_PMEVCNTR_EL0(24),
+	PMU_PMEVCNTR_EL0(25),
+	PMU_PMEVCNTR_EL0(26),
+	PMU_PMEVCNTR_EL0(27),
+	PMU_PMEVCNTR_EL0(28),
+	PMU_PMEVCNTR_EL0(29),
+	PMU_PMEVCNTR_EL0(30),
+	/* PMEVTYPERn_EL0 */
+	PMU_PMEVTYPER_EL0(0),
+	PMU_PMEVTYPER_EL0(1),
+	PMU_PMEVTYPER_EL0(2),
+	PMU_PMEVTYPER_EL0(3),
+	PMU_PMEVTYPER_EL0(4),
+	PMU_PMEVTYPER_EL0(5),
+	PMU_PMEVTYPER_EL0(6),
+	PMU_PMEVTYPER_EL0(7),
+	PMU_PMEVTYPER_EL0(8),
+	PMU_PMEVTYPER_EL0(9),
+	PMU_PMEVTYPER_EL0(10),
+	PMU_PMEVTYPER_EL0(11),
+	PMU_PMEVTYPER_EL0(12),
+	PMU_PMEVTYPER_EL0(13),
+	PMU_PMEVTYPER_EL0(14),
+	PMU_PMEVTYPER_EL0(15),
+	PMU_PMEVTYPER_EL0(16),
+	PMU_PMEVTYPER_EL0(17),
+	PMU_PMEVTYPER_EL0(18),
+	PMU_PMEVTYPER_EL0(19),
+	PMU_PMEVTYPER_EL0(20),
+	PMU_PMEVTYPER_EL0(21),
+	PMU_PMEVTYPER_EL0(22),
+	PMU_PMEVTYPER_EL0(23),
+	PMU_PMEVTYPER_EL0(24),
+	PMU_PMEVTYPER_EL0(25),
+	PMU_PMEVTYPER_EL0(26),
+	PMU_PMEVTYPER_EL0(27),
+	PMU_PMEVTYPER_EL0(28),
+	PMU_PMEVTYPER_EL0(29),
+	PMU_PMEVTYPER_EL0(30),
+	/* PMCCFILTR_EL0
+	 * This register resets as unknown in 64bit mode while it resets as zero
+	 * in 32bit mode. Here we choose to reset it as zero for consistency.
+	 */
+	{ Op0(0b11), Op1(0b011), CRn(0b1110), CRm(0b1111), Op2(0b111),
+	  access_pmu_evtyper, reset_val, PMCCFILTR_EL0, 0 },
+
 	/* DACR32_EL2 */
 	{ Op0(0b11), Op1(0b100), CRn(0b0011), CRm(0b0000), Op2(0b000),
 	  NULL, reset_unknown, DACR32_EL2 },
@@ -687,7 +1108,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 };
 
 static bool trap_dbgidr(struct kvm_vcpu *vcpu,
-			const struct sys_reg_params *p,
+			struct sys_reg_params *p,
 			const struct sys_reg_desc *r)
 {
 	if (p->is_write) {
@@ -695,25 +1116,25 @@ static bool trap_dbgidr(struct kvm_vcpu *vcpu,
 	} else {
 		u64 dfr = read_system_reg(SYS_ID_AA64DFR0_EL1);
 		u64 pfr = read_system_reg(SYS_ID_AA64PFR0_EL1);
-		u32 el3 = !!cpuid_feature_extract_field(pfr, ID_AA64PFR0_EL3_SHIFT);
+		u32 el3 = !!cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR0_EL3_SHIFT);
 
-		*vcpu_reg(vcpu, p->Rt) = ((((dfr >> ID_AA64DFR0_WRPS_SHIFT) & 0xf) << 28) |
-					  (((dfr >> ID_AA64DFR0_BRPS_SHIFT) & 0xf) << 24) |
-					  (((dfr >> ID_AA64DFR0_CTX_CMPS_SHIFT) & 0xf) << 20) |
-					  (6 << 16) | (el3 << 14) | (el3 << 12));
+		p->regval = ((((dfr >> ID_AA64DFR0_WRPS_SHIFT) & 0xf) << 28) |
+			     (((dfr >> ID_AA64DFR0_BRPS_SHIFT) & 0xf) << 24) |
+			     (((dfr >> ID_AA64DFR0_CTX_CMPS_SHIFT) & 0xf) << 20)
+			     | (6 << 16) | (el3 << 14) | (el3 << 12));
 		return true;
 	}
 }
 
 static bool trap_debug32(struct kvm_vcpu *vcpu,
-			 const struct sys_reg_params *p,
+			 struct sys_reg_params *p,
 			 const struct sys_reg_desc *r)
 {
 	if (p->is_write) {
-		vcpu_cp14(vcpu, r->reg) = *vcpu_reg(vcpu, p->Rt);
+		vcpu_cp14(vcpu, r->reg) = p->regval;
 		vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
 	} else {
-		*vcpu_reg(vcpu, p->Rt) = vcpu_cp14(vcpu, r->reg);
+		p->regval = vcpu_cp14(vcpu, r->reg);
 	}
 
 	return true;
@@ -730,9 +1151,9 @@ static bool trap_debug32(struct kvm_vcpu *vcpu,
  * system is in.
  */
 
-static inline bool trap_xvr(struct kvm_vcpu *vcpu,
-			    const struct sys_reg_params *p,
-			    const struct sys_reg_desc *rd)
+static bool trap_xvr(struct kvm_vcpu *vcpu,
+		     struct sys_reg_params *p,
+		     const struct sys_reg_desc *rd)
 {
 	u64 *dbg_reg = &vcpu->arch.vcpu_debug_state.dbg_bvr[rd->reg];
 
@@ -740,12 +1161,12 @@ static inline bool trap_xvr(struct kvm_vcpu *vcpu,
 		u64 val = *dbg_reg;
 
 		val &= 0xffffffffUL;
-		val |= *vcpu_reg(vcpu, p->Rt) << 32;
+		val |= p->regval << 32;
 		*dbg_reg = val;
 
 		vcpu->arch.debug_flags |= KVM_ARM64_DEBUG_DIRTY;
 	} else {
-		*vcpu_reg(vcpu, p->Rt) = *dbg_reg >> 32;
+		p->regval = *dbg_reg >> 32;
 	}
 
 	trace_trap_reg(__func__, rd->reg, p->is_write, *dbg_reg);
@@ -864,6 +1285,20 @@ static const struct sys_reg_desc cp14_64_regs[] = {
 	{ Op1( 0), CRm( 2), .access = trap_raz_wi },
 };
 
+/* Macro to expand the PMEVCNTRn register */
+#define PMU_PMEVCNTR(n)							\
+	/* PMEVCNTRn */							\
+	{ Op1(0), CRn(0b1110),						\
+	  CRm((0b1000 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	  access_pmu_evcntr }
+
+/* Macro to expand the PMEVTYPERn register */
+#define PMU_PMEVTYPER(n)						\
+	/* PMEVTYPERn */						\
+	{ Op1(0), CRn(0b1110),						\
+	  CRm((0b1100 | (((n) >> 3) & 0x3))), Op2(((n) & 0x7)),		\
+	  access_pmu_evtyper }
+
 /*
  * Trapped cp15 registers. TTBR0/TTBR1 get a double encoding,
  * depending on the way they are accessed (as a 32bit or a 64bit
@@ -892,19 +1327,21 @@ static const struct sys_reg_desc cp15_regs[] = {
 	{ Op1( 0), CRn( 7), CRm(14), Op2( 2), access_dcsw },
 
 	/* PMU */
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 1), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 2), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 3), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 5), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 6), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(12), Op2( 7), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(13), Op2( 0), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(13), Op2( 1), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(13), Op2( 2), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(14), Op2( 0), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(14), Op2( 1), trap_raz_wi },
-	{ Op1( 0), CRn( 9), CRm(14), Op2( 2), trap_raz_wi },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 0), access_pmcr },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 1), access_pmcnten },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 2), access_pmcnten },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 3), access_pmovs },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 4), access_pmswinc },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 5), access_pmselr },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 6), access_pmceid },
+	{ Op1( 0), CRn( 9), CRm(12), Op2( 7), access_pmceid },
+	{ Op1( 0), CRn( 9), CRm(13), Op2( 0), access_pmu_evcntr },
+	{ Op1( 0), CRn( 9), CRm(13), Op2( 1), access_pmu_evtyper },
+	{ Op1( 0), CRn( 9), CRm(13), Op2( 2), access_pmu_evcntr },
+	{ Op1( 0), CRn( 9), CRm(14), Op2( 0), access_pmuserenr },
+	{ Op1( 0), CRn( 9), CRm(14), Op2( 1), access_pminten },
+	{ Op1( 0), CRn( 9), CRm(14), Op2( 2), access_pminten },
+	{ Op1( 0), CRn( 9), CRm(14), Op2( 3), access_pmovs },
 
 	{ Op1( 0), CRn(10), CRm( 2), Op2( 0), access_vm_reg, NULL, c10_PRRR },
 	{ Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, c10_NMRR },
@@ -915,10 +1352,78 @@ static const struct sys_reg_desc cp15_regs[] = {
 	{ Op1( 0), CRn(12), CRm(12), Op2( 5), trap_raz_wi },
 
 	{ Op1( 0), CRn(13), CRm( 0), Op2( 1), access_vm_reg, NULL, c13_CID },
+
+	/* PMEVCNTRn */
+	PMU_PMEVCNTR(0),
+	PMU_PMEVCNTR(1),
+	PMU_PMEVCNTR(2),
+	PMU_PMEVCNTR(3),
+	PMU_PMEVCNTR(4),
+	PMU_PMEVCNTR(5),
+	PMU_PMEVCNTR(6),
+	PMU_PMEVCNTR(7),
+	PMU_PMEVCNTR(8),
+	PMU_PMEVCNTR(9),
+	PMU_PMEVCNTR(10),
+	PMU_PMEVCNTR(11),
+	PMU_PMEVCNTR(12),
+	PMU_PMEVCNTR(13),
+	PMU_PMEVCNTR(14),
+	PMU_PMEVCNTR(15),
+	PMU_PMEVCNTR(16),
+	PMU_PMEVCNTR(17),
+	PMU_PMEVCNTR(18),
+	PMU_PMEVCNTR(19),
+	PMU_PMEVCNTR(20),
+	PMU_PMEVCNTR(21),
+	PMU_PMEVCNTR(22),
+	PMU_PMEVCNTR(23),
+	PMU_PMEVCNTR(24),
+	PMU_PMEVCNTR(25),
+	PMU_PMEVCNTR(26),
+	PMU_PMEVCNTR(27),
+	PMU_PMEVCNTR(28),
+	PMU_PMEVCNTR(29),
+	PMU_PMEVCNTR(30),
+	/* PMEVTYPERn */
+	PMU_PMEVTYPER(0),
+	PMU_PMEVTYPER(1),
+	PMU_PMEVTYPER(2),
+	PMU_PMEVTYPER(3),
+	PMU_PMEVTYPER(4),
+	PMU_PMEVTYPER(5),
+	PMU_PMEVTYPER(6),
+	PMU_PMEVTYPER(7),
+	PMU_PMEVTYPER(8),
+	PMU_PMEVTYPER(9),
+	PMU_PMEVTYPER(10),
+	PMU_PMEVTYPER(11),
+	PMU_PMEVTYPER(12),
+	PMU_PMEVTYPER(13),
+	PMU_PMEVTYPER(14),
+	PMU_PMEVTYPER(15),
+	PMU_PMEVTYPER(16),
+	PMU_PMEVTYPER(17),
+	PMU_PMEVTYPER(18),
+	PMU_PMEVTYPER(19),
+	PMU_PMEVTYPER(20),
+	PMU_PMEVTYPER(21),
+	PMU_PMEVTYPER(22),
+	PMU_PMEVTYPER(23),
+	PMU_PMEVTYPER(24),
+	PMU_PMEVTYPER(25),
+	PMU_PMEVTYPER(26),
+	PMU_PMEVTYPER(27),
+	PMU_PMEVTYPER(28),
+	PMU_PMEVTYPER(29),
+	PMU_PMEVTYPER(30),
+	/* PMCCFILTR */
+	{ Op1(0), CRn(14), CRm(15), Op2(7), access_pmu_evtyper },
 };
 
 static const struct sys_reg_desc cp15_64_regs[] = {
 	{ Op1( 0), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
+	{ Op1( 0), CRn( 0), CRm( 9), Op2( 0), access_pmu_evcntr },
 	{ Op1( 0), CRn( 0), CRm(12), Op2( 0), access_gic_sgi },
 	{ Op1( 1), CRn( 0), CRm( 2), Op2( 0), access_vm_reg, NULL, c2_TTBR1 },
 };
@@ -949,29 +1454,32 @@ static const struct sys_reg_desc *get_target_table(unsigned target,
 	}
 }
 
+#define reg_to_match_value(x)						\
+	({								\
+		unsigned long val;					\
+		val  = (x)->Op0 << 14;					\
+		val |= (x)->Op1 << 11;					\
+		val |= (x)->CRn << 7;					\
+		val |= (x)->CRm << 3;					\
+		val |= (x)->Op2;					\
+		val;							\
+	 })
+
+static int match_sys_reg(const void *key, const void *elt)
+{
+	const unsigned long pval = (unsigned long)key;
+	const struct sys_reg_desc *r = elt;
+
+	return pval - reg_to_match_value(r);
+}
+
 static const struct sys_reg_desc *find_reg(const struct sys_reg_params *params,
 					 const struct sys_reg_desc table[],
 					 unsigned int num)
 {
-	unsigned int i;
-
-	for (i = 0; i < num; i++) {
-		const struct sys_reg_desc *r = &table[i];
+	unsigned long pval = reg_to_match_value(params);
 
-		if (params->Op0 != r->Op0)
-			continue;
-		if (params->Op1 != r->Op1)
-			continue;
-		if (params->CRn != r->CRn)
-			continue;
-		if (params->CRm != r->CRm)
-			continue;
-		if (params->Op2 != r->Op2)
-			continue;
-
-		return r;
-	}
-	return NULL;
+	return bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg);
 }
 
 int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
@@ -991,7 +1499,7 @@ int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu, struct kvm_run *run)
  * Return 0 if the access has been handled, and -1 if not.
  */
 static int emulate_cp(struct kvm_vcpu *vcpu,
-		      const struct sys_reg_params *params,
+		      struct sys_reg_params *params,
 		      const struct sys_reg_desc *table,
 		      size_t num)
 {
@@ -1014,10 +1522,9 @@ static int emulate_cp(struct kvm_vcpu *vcpu,
 		if (likely(r->access(vcpu, params, r))) {
 			/* Skip instruction, since it was emulated */
 			kvm_skip_instr(vcpu, kvm_vcpu_trap_il_is32bit(vcpu));
+			/* Handled */
+			return 0;
 		}
-
-		/* Handled */
-		return 0;
 	}
 
 	/* Not handled */
@@ -1050,7 +1557,7 @@ static void unhandled_cp_access(struct kvm_vcpu *vcpu,
 }
 
 /**
- * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP15 access
+ * kvm_handle_cp_64 -- handles a mrrc/mcrr trap on a guest CP14/CP15 access
  * @vcpu: The VCPU pointer
  * @run:  The kvm_run struct
  */
@@ -1062,12 +1569,12 @@ static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
 {
 	struct sys_reg_params params;
 	u32 hsr = kvm_vcpu_get_hsr(vcpu);
+	int Rt = (hsr >> 5) & 0xf;
 	int Rt2 = (hsr >> 10) & 0xf;
 
 	params.is_aarch32 = true;
 	params.is_32bit = false;
 	params.CRm = (hsr >> 1) & 0xf;
-	params.Rt = (hsr >> 5) & 0xf;
 	params.is_write = ((hsr & 1) == 0);
 
 	params.Op0 = 0;
@@ -1076,15 +1583,12 @@ static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
 	params.CRn = 0;
 
 	/*
-	 * Massive hack here. Store Rt2 in the top 32bits so we only
-	 * have one register to deal with. As we use the same trap
+	 * Make a 64-bit value out of Rt and Rt2. As we use the same trap
 	 * backends between AArch32 and AArch64, we get away with it.
 	 */
 	if (params.is_write) {
-		u64 val = *vcpu_reg(vcpu, params.Rt);
-		val &= 0xffffffff;
-		val |= *vcpu_reg(vcpu, Rt2) << 32;
-		*vcpu_reg(vcpu, params.Rt) = val;
+		params.regval = vcpu_get_reg(vcpu, Rt) & 0xffffffff;
+		params.regval |= vcpu_get_reg(vcpu, Rt2) << 32;
 	}
 
 	if (!emulate_cp(vcpu, &params, target_specific, nr_specific))
@@ -1095,18 +1599,17 @@ static int kvm_handle_cp_64(struct kvm_vcpu *vcpu,
 	unhandled_cp_access(vcpu, &params);
 
 out:
-	/* Do the opposite hack for the read side */
+	/* Split up the value between registers for the read side */
 	if (!params.is_write) {
-		u64 val = *vcpu_reg(vcpu, params.Rt);
-		val >>= 32;
-		*vcpu_reg(vcpu, Rt2) = val;
+		vcpu_set_reg(vcpu, Rt, lower_32_bits(params.regval));
+		vcpu_set_reg(vcpu, Rt2, upper_32_bits(params.regval));
 	}
 
 	return 1;
 }
 
 /**
- * kvm_handle_cp15_32 -- handles a mrc/mcr trap on a guest CP15 access
+ * kvm_handle_cp_32 -- handles a mrc/mcr trap on a guest CP14/CP15 access
  * @vcpu: The VCPU pointer
  * @run:  The kvm_run struct
  */
@@ -1118,21 +1621,24 @@ static int kvm_handle_cp_32(struct kvm_vcpu *vcpu,
 {
 	struct sys_reg_params params;
 	u32 hsr = kvm_vcpu_get_hsr(vcpu);
+	int Rt  = (hsr >> 5) & 0xf;
 
 	params.is_aarch32 = true;
 	params.is_32bit = true;
 	params.CRm = (hsr >> 1) & 0xf;
-	params.Rt  = (hsr >> 5) & 0xf;
+	params.regval = vcpu_get_reg(vcpu, Rt);
 	params.is_write = ((hsr & 1) == 0);
 	params.CRn = (hsr >> 10) & 0xf;
 	params.Op0 = 0;
 	params.Op1 = (hsr >> 14) & 0x7;
 	params.Op2 = (hsr >> 17) & 0x7;
 
-	if (!emulate_cp(vcpu, &params, target_specific, nr_specific))
-		return 1;
-	if (!emulate_cp(vcpu, &params, global, nr_global))
+	if (!emulate_cp(vcpu, &params, target_specific, nr_specific) ||
+	    !emulate_cp(vcpu, &params, global, nr_global)) {
+		if (!params.is_write)
+			vcpu_set_reg(vcpu, Rt, params.regval);
 		return 1;
+	}
 
 	unhandled_cp_access(vcpu, &params);
 	return 1;
@@ -1175,7 +1681,7 @@ int kvm_handle_cp14_32(struct kvm_vcpu *vcpu, struct kvm_run *run)
 }
 
 static int emulate_sys_reg(struct kvm_vcpu *vcpu,
-			   const struct sys_reg_params *params)
+			   struct sys_reg_params *params)
 {
 	size_t num;
 	const struct sys_reg_desc *table, *r;
@@ -1230,6 +1736,8 @@ int kvm_handle_sys_reg(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 	struct sys_reg_params params;
 	unsigned long esr = kvm_vcpu_get_hsr(vcpu);
+	int Rt = (esr >> 5) & 0x1f;
+	int ret;
 
 	trace_kvm_handle_sys_reg(esr);
 
@@ -1240,10 +1748,14 @@ int kvm_handle_sys_reg(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	params.CRn = (esr >> 10) & 0xf;
 	params.CRm = (esr >> 1) & 0xf;
 	params.Op2 = (esr >> 17) & 0x7;
-	params.Rt = (esr >> 5) & 0x1f;
+	params.regval = vcpu_get_reg(vcpu, Rt);
 	params.is_write = !(esr & 1);
 
-	return emulate_sys_reg(vcpu, &params);
+	ret = emulate_sys_reg(vcpu, &params);
+
+	if (!params.is_write)
+		vcpu_set_reg(vcpu, Rt, params.regval);
+	return ret;
 }
 
 /******************************************************************************
diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
index eaa324e4db4d..dbbb01cfbee9 100644
--- a/arch/arm64/kvm/sys_regs.h
+++ b/arch/arm64/kvm/sys_regs.h
@@ -28,7 +28,7 @@ struct sys_reg_params {
 	u8	CRn;
 	u8	CRm;
 	u8	Op2;
-	u8	Rt;
+	u64	regval;
 	bool	is_write;
 	bool	is_aarch32;
 	bool	is_32bit;	/* Only valid if is_aarch32 is true */
@@ -44,7 +44,7 @@ struct sys_reg_desc {
 
 	/* Trapped access from guest, if non-NULL. */
 	bool (*access)(struct kvm_vcpu *,
-		       const struct sys_reg_params *,
+		       struct sys_reg_params *,
 		       const struct sys_reg_desc *);
 
 	/* Initialization for vcpu. */
@@ -77,9 +77,9 @@ static inline bool ignore_write(struct kvm_vcpu *vcpu,
 }
 
 static inline bool read_zero(struct kvm_vcpu *vcpu,
-			     const struct sys_reg_params *p)
+			     struct sys_reg_params *p)
 {
-	*vcpu_reg(vcpu, p->Rt) = 0;
+	p->regval = 0;
 	return true;
 }
 
diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c
index 1e4576824165..ed90578fa120 100644
--- a/arch/arm64/kvm/sys_regs_generic_v8.c
+++ b/arch/arm64/kvm/sys_regs_generic_v8.c
@@ -31,13 +31,13 @@
 #include "sys_regs.h"
 
 static bool access_actlr(struct kvm_vcpu *vcpu,
-			 const struct sys_reg_params *p,
+			 struct sys_reg_params *p,
 			 const struct sys_reg_desc *r)
 {
 	if (p->is_write)
 		return ignore_write(vcpu, p);
 
-	*vcpu_reg(vcpu, p->Rt) = vcpu_sys_reg(vcpu, ACTLR_EL1);
+	p->regval = vcpu_sys_reg(vcpu, ACTLR_EL1);
 	return true;
 }
 
diff --git a/arch/arm64/kvm/vgic-v2-switch.S b/arch/arm64/kvm/vgic-v2-switch.S
deleted file mode 100644
index 3f000712a85d..000000000000
--- a/arch/arm64/kvm/vgic-v2-switch.S
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Copyright (C) 2012,2013 - ARM Ltd
- * Author: Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/linkage.h>
-#include <linux/irqchip/arm-gic.h>
-
-#include <asm/assembler.h>
-#include <asm/memory.h>
-#include <asm/asm-offsets.h>
-#include <asm/kvm.h>
-#include <asm/kvm_asm.h>
-#include <asm/kvm_arm.h>
-#include <asm/kvm_mmu.h>
-
-	.text
-	.pushsection	.hyp.text, "ax"
-
-/*
- * Save the VGIC CPU state into memory
- * x0: Register pointing to VCPU struct
- * Do not corrupt x1!!!
- */
-ENTRY(__save_vgic_v2_state)
-__save_vgic_v2_state:
-	/* Get VGIC VCTRL base into x2 */
-	ldr	x2, [x0, #VCPU_KVM]
-	kern_hyp_va	x2
-	ldr	x2, [x2, #KVM_VGIC_VCTRL]
-	kern_hyp_va	x2
-	cbz	x2, 2f		// disabled
-
-	/* Compute the address of struct vgic_cpu */
-	add	x3, x0, #VCPU_VGIC_CPU
-
-	/* Save all interesting registers */
-	ldr	w5, [x2, #GICH_VMCR]
-	ldr	w6, [x2, #GICH_MISR]
-	ldr	w7, [x2, #GICH_EISR0]
-	ldr	w8, [x2, #GICH_EISR1]
-	ldr	w9, [x2, #GICH_ELRSR0]
-	ldr	w10, [x2, #GICH_ELRSR1]
-	ldr	w11, [x2, #GICH_APR]
-CPU_BE(	rev	w5,  w5  )
-CPU_BE(	rev	w6,  w6  )
-CPU_BE(	rev	w7,  w7  )
-CPU_BE(	rev	w8,  w8  )
-CPU_BE(	rev	w9,  w9  )
-CPU_BE(	rev	w10, w10 )
-CPU_BE(	rev	w11, w11 )
-
-	str	w5, [x3, #VGIC_V2_CPU_VMCR]
-	str	w6, [x3, #VGIC_V2_CPU_MISR]
-CPU_LE(	str	w7, [x3, #VGIC_V2_CPU_EISR] )
-CPU_LE(	str	w8, [x3, #(VGIC_V2_CPU_EISR + 4)] )
-CPU_LE(	str	w9, [x3, #VGIC_V2_CPU_ELRSR] )
-CPU_LE(	str	w10, [x3, #(VGIC_V2_CPU_ELRSR + 4)] )
-CPU_BE(	str	w7, [x3, #(VGIC_V2_CPU_EISR + 4)] )
-CPU_BE(	str	w8, [x3, #VGIC_V2_CPU_EISR] )
-CPU_BE(	str	w9, [x3, #(VGIC_V2_CPU_ELRSR + 4)] )
-CPU_BE(	str	w10, [x3, #VGIC_V2_CPU_ELRSR] )
-	str	w11, [x3, #VGIC_V2_CPU_APR]
-
-	/* Clear GICH_HCR */
-	str	wzr, [x2, #GICH_HCR]
-
-	/* Save list registers */
-	add	x2, x2, #GICH_LR0
-	ldr	w4, [x3, #VGIC_CPU_NR_LR]
-	add	x3, x3, #VGIC_V2_CPU_LR
-1:	ldr	w5, [x2], #4
-CPU_BE(	rev	w5, w5 )
-	str	w5, [x3], #4
-	sub	w4, w4, #1
-	cbnz	w4, 1b
-2:
-	ret
-ENDPROC(__save_vgic_v2_state)
-
-/*
- * Restore the VGIC CPU state from memory
- * x0: Register pointing to VCPU struct
- */
-ENTRY(__restore_vgic_v2_state)
-__restore_vgic_v2_state:
-	/* Get VGIC VCTRL base into x2 */
-	ldr	x2, [x0, #VCPU_KVM]
-	kern_hyp_va	x2
-	ldr	x2, [x2, #KVM_VGIC_VCTRL]
-	kern_hyp_va	x2
-	cbz	x2, 2f		// disabled
-
-	/* Compute the address of struct vgic_cpu */
-	add	x3, x0, #VCPU_VGIC_CPU
-
-	/* We only restore a minimal set of registers */
-	ldr	w4, [x3, #VGIC_V2_CPU_HCR]
-	ldr	w5, [x3, #VGIC_V2_CPU_VMCR]
-	ldr	w6, [x3, #VGIC_V2_CPU_APR]
-CPU_BE(	rev	w4, w4 )
-CPU_BE(	rev	w5, w5 )
-CPU_BE(	rev	w6, w6 )
-
-	str	w4, [x2, #GICH_HCR]
-	str	w5, [x2, #GICH_VMCR]
-	str	w6, [x2, #GICH_APR]
-
-	/* Restore list registers */
-	add	x2, x2, #GICH_LR0
-	ldr	w4, [x3, #VGIC_CPU_NR_LR]
-	add	x3, x3, #VGIC_V2_CPU_LR
-1:	ldr	w5, [x3], #4
-CPU_BE(	rev	w5, w5 )
-	str	w5, [x2], #4
-	sub	w4, w4, #1
-	cbnz	w4, 1b
-2:
-	ret
-ENDPROC(__restore_vgic_v2_state)
-
-	.popsection
diff --git a/arch/arm64/kvm/vgic-v3-switch.S b/arch/arm64/kvm/vgic-v3-switch.S
deleted file mode 100644
index 3c20730ddff5..000000000000
--- a/arch/arm64/kvm/vgic-v3-switch.S
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Copyright (C) 2012,2013 - ARM Ltd
- * Author: Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/linkage.h>
-#include <linux/irqchip/arm-gic-v3.h>
-
-#include <asm/assembler.h>
-#include <asm/memory.h>
-#include <asm/asm-offsets.h>
-#include <asm/kvm.h>
-#include <asm/kvm_asm.h>
-#include <asm/kvm_arm.h>
-
-	.text
-	.pushsection	.hyp.text, "ax"
-
-/*
- * We store LRs in reverse order to let the CPU deal with streaming
- * access. Use this macro to make it look saner...
- */
-#define LR_OFFSET(n)	(VGIC_V3_CPU_LR + (15 - n) * 8)
-
-/*
- * Save the VGIC CPU state into memory
- * x0: Register pointing to VCPU struct
- * Do not corrupt x1!!!
- */
-.macro	save_vgic_v3_state
-	// Compute the address of struct vgic_cpu
-	add	x3, x0, #VCPU_VGIC_CPU
-
-	// Make sure stores to the GIC via the memory mapped interface
-	// are now visible to the system register interface
-	dsb	st
-
-	// Save all interesting registers
-	mrs_s	x5, ICH_VMCR_EL2
-	mrs_s	x6, ICH_MISR_EL2
-	mrs_s	x7, ICH_EISR_EL2
-	mrs_s	x8, ICH_ELSR_EL2
-
-	str	w5, [x3, #VGIC_V3_CPU_VMCR]
-	str	w6, [x3, #VGIC_V3_CPU_MISR]
-	str	w7, [x3, #VGIC_V3_CPU_EISR]
-	str	w8, [x3, #VGIC_V3_CPU_ELRSR]
-
-	msr_s	ICH_HCR_EL2, xzr
-
-	mrs_s	x21, ICH_VTR_EL2
-	mvn	w22, w21
-	ubfiz	w23, w22, 2, 4	// w23 = (15 - ListRegs) * 4
-
-	adr	x24, 1f
-	add	x24, x24, x23
-	br	x24
-
-1:
-	mrs_s	x20, ICH_LR15_EL2
-	mrs_s	x19, ICH_LR14_EL2
-	mrs_s	x18, ICH_LR13_EL2
-	mrs_s	x17, ICH_LR12_EL2
-	mrs_s	x16, ICH_LR11_EL2
-	mrs_s	x15, ICH_LR10_EL2
-	mrs_s	x14, ICH_LR9_EL2
-	mrs_s	x13, ICH_LR8_EL2
-	mrs_s	x12, ICH_LR7_EL2
-	mrs_s	x11, ICH_LR6_EL2
-	mrs_s	x10, ICH_LR5_EL2
-	mrs_s	x9, ICH_LR4_EL2
-	mrs_s	x8, ICH_LR3_EL2
-	mrs_s	x7, ICH_LR2_EL2
-	mrs_s	x6, ICH_LR1_EL2
-	mrs_s	x5, ICH_LR0_EL2
-
-	adr	x24, 1f
-	add	x24, x24, x23
-	br	x24
-
-1:
-	str	x20, [x3, #LR_OFFSET(15)]
-	str	x19, [x3, #LR_OFFSET(14)]
-	str	x18, [x3, #LR_OFFSET(13)]
-	str	x17, [x3, #LR_OFFSET(12)]
-	str	x16, [x3, #LR_OFFSET(11)]
-	str	x15, [x3, #LR_OFFSET(10)]
-	str	x14, [x3, #LR_OFFSET(9)]
-	str	x13, [x3, #LR_OFFSET(8)]
-	str	x12, [x3, #LR_OFFSET(7)]
-	str	x11, [x3, #LR_OFFSET(6)]
-	str	x10, [x3, #LR_OFFSET(5)]
-	str	x9, [x3, #LR_OFFSET(4)]
-	str	x8, [x3, #LR_OFFSET(3)]
-	str	x7, [x3, #LR_OFFSET(2)]
-	str	x6, [x3, #LR_OFFSET(1)]
-	str	x5, [x3, #LR_OFFSET(0)]
-
-	tbnz	w21, #29, 6f	// 6 bits
-	tbz	w21, #30, 5f	// 5 bits
-				// 7 bits
-	mrs_s	x20, ICH_AP0R3_EL2
-	str	w20, [x3, #(VGIC_V3_CPU_AP0R + 3*4)]
-	mrs_s	x19, ICH_AP0R2_EL2
-	str	w19, [x3, #(VGIC_V3_CPU_AP0R + 2*4)]
-6:	mrs_s	x18, ICH_AP0R1_EL2
-	str	w18, [x3, #(VGIC_V3_CPU_AP0R + 1*4)]
-5:	mrs_s	x17, ICH_AP0R0_EL2
-	str	w17, [x3, #VGIC_V3_CPU_AP0R]
-
-	tbnz	w21, #29, 6f	// 6 bits
-	tbz	w21, #30, 5f	// 5 bits
-				// 7 bits
-	mrs_s	x20, ICH_AP1R3_EL2
-	str	w20, [x3, #(VGIC_V3_CPU_AP1R + 3*4)]
-	mrs_s	x19, ICH_AP1R2_EL2
-	str	w19, [x3, #(VGIC_V3_CPU_AP1R + 2*4)]
-6:	mrs_s	x18, ICH_AP1R1_EL2
-	str	w18, [x3, #(VGIC_V3_CPU_AP1R + 1*4)]
-5:	mrs_s	x17, ICH_AP1R0_EL2
-	str	w17, [x3, #VGIC_V3_CPU_AP1R]
-
-	// Restore SRE_EL1 access and re-enable SRE at EL1.
-	mrs_s	x5, ICC_SRE_EL2
-	orr	x5, x5, #ICC_SRE_EL2_ENABLE
-	msr_s	ICC_SRE_EL2, x5
-	isb
-	mov	x5, #1
-	msr_s	ICC_SRE_EL1, x5
-.endm
-
-/*
- * Restore the VGIC CPU state from memory
- * x0: Register pointing to VCPU struct
- */
-.macro	restore_vgic_v3_state
-	// Compute the address of struct vgic_cpu
-	add	x3, x0, #VCPU_VGIC_CPU
-
-	// Restore all interesting registers
-	ldr	w4, [x3, #VGIC_V3_CPU_HCR]
-	ldr	w5, [x3, #VGIC_V3_CPU_VMCR]
-	ldr	w25, [x3, #VGIC_V3_CPU_SRE]
-
-	msr_s	ICC_SRE_EL1, x25
-
-	// make sure SRE is valid before writing the other registers
-	isb
-
-	msr_s	ICH_HCR_EL2, x4
-	msr_s	ICH_VMCR_EL2, x5
-
-	mrs_s	x21, ICH_VTR_EL2
-
-	tbnz	w21, #29, 6f	// 6 bits
-	tbz	w21, #30, 5f	// 5 bits
-				// 7 bits
-	ldr	w20, [x3, #(VGIC_V3_CPU_AP1R + 3*4)]
-	msr_s	ICH_AP1R3_EL2, x20
-	ldr	w19, [x3, #(VGIC_V3_CPU_AP1R + 2*4)]
-	msr_s	ICH_AP1R2_EL2, x19
-6:	ldr	w18, [x3, #(VGIC_V3_CPU_AP1R + 1*4)]
-	msr_s	ICH_AP1R1_EL2, x18
-5:	ldr	w17, [x3, #VGIC_V3_CPU_AP1R]
-	msr_s	ICH_AP1R0_EL2, x17
-
-	tbnz	w21, #29, 6f	// 6 bits
-	tbz	w21, #30, 5f	// 5 bits
-				// 7 bits
-	ldr	w20, [x3, #(VGIC_V3_CPU_AP0R + 3*4)]
-	msr_s	ICH_AP0R3_EL2, x20
-	ldr	w19, [x3, #(VGIC_V3_CPU_AP0R + 2*4)]
-	msr_s	ICH_AP0R2_EL2, x19
-6:	ldr	w18, [x3, #(VGIC_V3_CPU_AP0R + 1*4)]
-	msr_s	ICH_AP0R1_EL2, x18
-5:	ldr	w17, [x3, #VGIC_V3_CPU_AP0R]
-	msr_s	ICH_AP0R0_EL2, x17
-
-	and	w22, w21, #0xf
-	mvn	w22, w21
-	ubfiz	w23, w22, 2, 4	// w23 = (15 - ListRegs) * 4
-
-	adr	x24, 1f
-	add	x24, x24, x23
-	br	x24
-
-1:
-	ldr	x20, [x3, #LR_OFFSET(15)]
-	ldr	x19, [x3, #LR_OFFSET(14)]
-	ldr	x18, [x3, #LR_OFFSET(13)]
-	ldr	x17, [x3, #LR_OFFSET(12)]
-	ldr	x16, [x3, #LR_OFFSET(11)]
-	ldr	x15, [x3, #LR_OFFSET(10)]
-	ldr	x14, [x3, #LR_OFFSET(9)]
-	ldr	x13, [x3, #LR_OFFSET(8)]
-	ldr	x12, [x3, #LR_OFFSET(7)]
-	ldr	x11, [x3, #LR_OFFSET(6)]
-	ldr	x10, [x3, #LR_OFFSET(5)]
-	ldr	x9, [x3, #LR_OFFSET(4)]
-	ldr	x8, [x3, #LR_OFFSET(3)]
-	ldr	x7, [x3, #LR_OFFSET(2)]
-	ldr	x6, [x3, #LR_OFFSET(1)]
-	ldr	x5, [x3, #LR_OFFSET(0)]
-
-	adr	x24, 1f
-	add	x24, x24, x23
-	br	x24
-
-1:
-	msr_s	ICH_LR15_EL2, x20
-	msr_s	ICH_LR14_EL2, x19
-	msr_s	ICH_LR13_EL2, x18
-	msr_s	ICH_LR12_EL2, x17
-	msr_s	ICH_LR11_EL2, x16
-	msr_s	ICH_LR10_EL2, x15
-	msr_s	ICH_LR9_EL2,  x14
-	msr_s	ICH_LR8_EL2,  x13
-	msr_s	ICH_LR7_EL2,  x12
-	msr_s	ICH_LR6_EL2,  x11
-	msr_s	ICH_LR5_EL2,  x10
-	msr_s	ICH_LR4_EL2,   x9
-	msr_s	ICH_LR3_EL2,   x8
-	msr_s	ICH_LR2_EL2,   x7
-	msr_s	ICH_LR1_EL2,   x6
-	msr_s	ICH_LR0_EL2,   x5
-
-	// Ensure that the above will have reached the
-	// (re)distributors. This ensure the guest will read
-	// the correct values from the memory-mapped interface.
-	isb
-	dsb	sy
-
-	// Prevent the guest from touching the GIC system registers
-	// if SRE isn't enabled for GICv3 emulation
-	cbnz	x25, 1f
-	mrs_s	x5, ICC_SRE_EL2
-	and	x5, x5, #~ICC_SRE_EL2_ENABLE
-	msr_s	ICC_SRE_EL2, x5
-1:
-.endm
-
-ENTRY(__save_vgic_v3_state)
-	save_vgic_v3_state
-	ret
-ENDPROC(__save_vgic_v3_state)
-
-ENTRY(__restore_vgic_v3_state)
-	restore_vgic_v3_state
-	ret
-ENDPROC(__restore_vgic_v3_state)
-
-ENTRY(__vgic_v3_get_ich_vtr_el2)
-	mrs_s	x0, ICH_VTR_EL2
-	ret
-ENDPROC(__vgic_v3_get_ich_vtr_el2)
-
-	.popsection
diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile
index 1a811ecf71da..c86b7909ef31 100644
--- a/arch/arm64/lib/Makefile
+++ b/arch/arm64/lib/Makefile
@@ -4,15 +4,16 @@ lib-y		:= bitops.o clear_user.o delay.o copy_from_user.o	\
 		   memcmp.o strcmp.o strncmp.o strlen.o strnlen.o	\
 		   strchr.o strrchr.o
 
-# Tell the compiler to treat all general purpose registers as
-# callee-saved, which allows for efficient runtime patching of the bl
-# instruction in the caller with an atomic instruction when supported by
-# the CPU. Result and argument registers are handled correctly, based on
-# the function prototype.
+# Tell the compiler to treat all general purpose registers (with the
+# exception of the IP registers, which are already handled by the caller
+# in case of a PLT) as callee-saved, which allows for efficient runtime
+# patching of the bl instruction in the caller with an atomic instruction
+# when supported by the CPU. Result and argument registers are handled
+# correctly, based on the function prototype.
 lib-$(CONFIG_ARM64_LSE_ATOMICS) += atomic_ll_sc.o
 CFLAGS_atomic_ll_sc.o	:= -fcall-used-x0 -ffixed-x1 -ffixed-x2		\
 		   -ffixed-x3 -ffixed-x4 -ffixed-x5 -ffixed-x6		\
 		   -ffixed-x7 -fcall-saved-x8 -fcall-saved-x9		\
 		   -fcall-saved-x10 -fcall-saved-x11 -fcall-saved-x12	\
 		   -fcall-saved-x13 -fcall-saved-x14 -fcall-saved-x15	\
-		   -fcall-saved-x16 -fcall-saved-x17 -fcall-saved-x18
+		   -fcall-saved-x18
diff --git a/arch/arm64/lib/clear_user.S b/arch/arm64/lib/clear_user.S
index a9723c71c52b..5d1cad3ce6d6 100644
--- a/arch/arm64/lib/clear_user.S
+++ b/arch/arm64/lib/clear_user.S
@@ -33,28 +33,28 @@
  * Alignment fixed up by hardware.
  */
 ENTRY(__clear_user)
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	mov	x2, x1			// save the size for fixup return
 	subs	x1, x1, #8
 	b.mi	2f
 1:
-USER(9f, str	xzr, [x0], #8	)
+uao_user_alternative 9f, str, sttr, xzr, x0, 8
 	subs	x1, x1, #8
 	b.pl	1b
 2:	adds	x1, x1, #4
 	b.mi	3f
-USER(9f, str	wzr, [x0], #4	)
+uao_user_alternative 9f, str, sttr, wzr, x0, 4
 	sub	x1, x1, #4
 3:	adds	x1, x1, #2
 	b.mi	4f
-USER(9f, strh	wzr, [x0], #2	)
+uao_user_alternative 9f, strh, sttrh, wzr, x0, 2
 	sub	x1, x1, #2
 4:	adds	x1, x1, #1
 	b.mi	5f
-USER(9f, strb	wzr, [x0]	)
+uao_user_alternative 9f, strb, sttrb, wzr, x0, 0
 5:	mov	x0, #0
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	ret
 ENDPROC(__clear_user)
diff --git a/arch/arm64/lib/copy_from_user.S b/arch/arm64/lib/copy_from_user.S
index 4699cd74f87e..17e8306dca29 100644
--- a/arch/arm64/lib/copy_from_user.S
+++ b/arch/arm64/lib/copy_from_user.S
@@ -34,7 +34,7 @@
  */
 
 	.macro ldrb1 ptr, regB, val
-	USER(9998f, ldrb  \ptr, [\regB], \val)
+	uao_user_alternative 9998f, ldrb, ldtrb, \ptr, \regB, \val
 	.endm
 
 	.macro strb1 ptr, regB, val
@@ -42,7 +42,7 @@
 	.endm
 
 	.macro ldrh1 ptr, regB, val
-	USER(9998f, ldrh  \ptr, [\regB], \val)
+	uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
 	.endm
 
 	.macro strh1 ptr, regB, val
@@ -50,7 +50,7 @@
 	.endm
 
 	.macro ldr1 ptr, regB, val
-	USER(9998f, ldr \ptr, [\regB], \val)
+	uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
 	.endm
 
 	.macro str1 ptr, regB, val
@@ -58,7 +58,7 @@
 	.endm
 
 	.macro ldp1 ptr, regB, regC, val
-	USER(9998f, ldp \ptr, \regB, [\regC], \val)
+	uao_ldp 9998f, \ptr, \regB, \regC, \val
 	.endm
 
 	.macro stp1 ptr, regB, regC, val
@@ -67,11 +67,11 @@
 
 end	.req	x5
 ENTRY(__copy_from_user)
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	add	end, x0, x2
 #include "copy_template.S"
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	mov	x0, #0				// Nothing to copy
 	ret
diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S
index 81c8fc93c100..f7292dd08c84 100644
--- a/arch/arm64/lib/copy_in_user.S
+++ b/arch/arm64/lib/copy_in_user.S
@@ -35,44 +35,44 @@
  *	x0 - bytes not copied
  */
 	.macro ldrb1 ptr, regB, val
-	USER(9998f, ldrb  \ptr, [\regB], \val)
+	uao_user_alternative 9998f, ldrb, ldtrb, \ptr, \regB, \val
 	.endm
 
 	.macro strb1 ptr, regB, val
-	USER(9998f, strb \ptr, [\regB], \val)
+	uao_user_alternative 9998f, strb, sttrb, \ptr, \regB, \val
 	.endm
 
 	.macro ldrh1 ptr, regB, val
-	USER(9998f, ldrh  \ptr, [\regB], \val)
+	uao_user_alternative 9998f, ldrh, ldtrh, \ptr, \regB, \val
 	.endm
 
 	.macro strh1 ptr, regB, val
-	USER(9998f, strh \ptr, [\regB], \val)
+	uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
 	.endm
 
 	.macro ldr1 ptr, regB, val
-	USER(9998f, ldr \ptr, [\regB], \val)
+	uao_user_alternative 9998f, ldr, ldtr, \ptr, \regB, \val
 	.endm
 
 	.macro str1 ptr, regB, val
-	USER(9998f, str \ptr, [\regB], \val)
+	uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
 	.endm
 
 	.macro ldp1 ptr, regB, regC, val
-	USER(9998f, ldp \ptr, \regB, [\regC], \val)
+	uao_ldp 9998f, \ptr, \regB, \regC, \val
 	.endm
 
 	.macro stp1 ptr, regB, regC, val
-	USER(9998f, stp \ptr, \regB, [\regC], \val)
+	uao_stp 9998f, \ptr, \regB, \regC, \val
 	.endm
 
 end	.req	x5
 ENTRY(__copy_in_user)
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	add	end, x0, x2
 #include "copy_template.S"
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	mov	x0, #0
 	ret
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
index 512b9a7b980e..4c1e700840b6 100644
--- a/arch/arm64/lib/copy_page.S
+++ b/arch/arm64/lib/copy_page.S
@@ -18,6 +18,8 @@
 #include <linux/const.h>
 #include <asm/assembler.h>
 #include <asm/page.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative.h>
 
 /*
  * Copy a page from src to dest (both are page aligned)
@@ -27,20 +29,65 @@
  *	x1 - src
  */
 ENTRY(copy_page)
-	/* Assume cache line size is 64 bytes. */
-	prfm	pldl1strm, [x1, #64]
-1:	ldp	x2, x3, [x1]
+alternative_if_not ARM64_HAS_NO_HW_PREFETCH
+	nop
+	nop
+alternative_else
+	# Prefetch two cache lines ahead.
+	prfm    pldl1strm, [x1, #128]
+	prfm    pldl1strm, [x1, #256]
+alternative_endif
+
+	ldp	x2, x3, [x1]
 	ldp	x4, x5, [x1, #16]
 	ldp	x6, x7, [x1, #32]
 	ldp	x8, x9, [x1, #48]
-	add	x1, x1, #64
-	prfm	pldl1strm, [x1, #64]
+	ldp	x10, x11, [x1, #64]
+	ldp	x12, x13, [x1, #80]
+	ldp	x14, x15, [x1, #96]
+	ldp	x16, x17, [x1, #112]
+
+	mov	x18, #(PAGE_SIZE - 128)
+	add	x1, x1, #128
+1:
+	subs	x18, x18, #128
+
+alternative_if_not ARM64_HAS_NO_HW_PREFETCH
+	nop
+alternative_else
+	prfm    pldl1strm, [x1, #384]
+alternative_endif
+
 	stnp	x2, x3, [x0]
+	ldp	x2, x3, [x1]
 	stnp	x4, x5, [x0, #16]
+	ldp	x4, x5, [x1, #16]
 	stnp	x6, x7, [x0, #32]
+	ldp	x6, x7, [x1, #32]
 	stnp	x8, x9, [x0, #48]
-	add	x0, x0, #64
-	tst	x1, #(PAGE_SIZE - 1)
-	b.ne	1b
+	ldp	x8, x9, [x1, #48]
+	stnp	x10, x11, [x0, #64]
+	ldp	x10, x11, [x1, #64]
+	stnp	x12, x13, [x0, #80]
+	ldp	x12, x13, [x1, #80]
+	stnp	x14, x15, [x0, #96]
+	ldp	x14, x15, [x1, #96]
+	stnp	x16, x17, [x0, #112]
+	ldp	x16, x17, [x1, #112]
+
+	add	x0, x0, #128
+	add	x1, x1, #128
+
+	b.gt	1b
+
+	stnp	x2, x3, [x0]
+	stnp	x4, x5, [x0, #16]
+	stnp	x6, x7, [x0, #32]
+	stnp	x8, x9, [x0, #48]
+	stnp	x10, x11, [x0, #64]
+	stnp	x12, x13, [x0, #80]
+	stnp	x14, x15, [x0, #96]
+	stnp	x16, x17, [x0, #112]
+
 	ret
 ENDPROC(copy_page)
diff --git a/arch/arm64/lib/copy_to_user.S b/arch/arm64/lib/copy_to_user.S
index 7512bbbc07ac..21faae60f988 100644
--- a/arch/arm64/lib/copy_to_user.S
+++ b/arch/arm64/lib/copy_to_user.S
@@ -37,7 +37,7 @@
 	.endm
 
 	.macro strb1 ptr, regB, val
-	USER(9998f, strb \ptr, [\regB], \val)
+	uao_user_alternative 9998f, strb, sttrb, \ptr, \regB, \val
 	.endm
 
 	.macro ldrh1 ptr, regB, val
@@ -45,7 +45,7 @@
 	.endm
 
 	.macro strh1 ptr, regB, val
-	USER(9998f, strh \ptr, [\regB], \val)
+	uao_user_alternative 9998f, strh, sttrh, \ptr, \regB, \val
 	.endm
 
 	.macro ldr1 ptr, regB, val
@@ -53,7 +53,7 @@
 	.endm
 
 	.macro str1 ptr, regB, val
-	USER(9998f, str \ptr, [\regB], \val)
+	uao_user_alternative 9998f, str, sttr, \ptr, \regB, \val
 	.endm
 
 	.macro ldp1 ptr, regB, regC, val
@@ -61,16 +61,16 @@
 	.endm
 
 	.macro stp1 ptr, regB, regC, val
-	USER(9998f, stp \ptr, \regB, [\regC], \val)
+	uao_stp 9998f, \ptr, \regB, \regC, \val
 	.endm
 
 end	.req	x5
 ENTRY(__copy_to_user)
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(0)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	add	end, x0, x2
 #include "copy_template.S"
-ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_HAS_PAN, \
+ALTERNATIVE("nop", __stringify(SET_PSTATE_PAN(1)), ARM64_ALT_PAN_NOT_UAO, \
 	    CONFIG_ARM64_PAN)
 	mov	x0, #0
 	ret
diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S
index ffbdec00327d..2a4e239bd17a 100644
--- a/arch/arm64/lib/memcmp.S
+++ b/arch/arm64/lib/memcmp.S
@@ -211,7 +211,7 @@ CPU_LE( lsr	tmp2, tmp2, tmp1 )
 .Lunequal_proc:
 	cbz	diff, .Lremain8
 
-/*There is differnence occured in the latest comparison.*/
+/* There is difference occurred in the latest comparison. */
 .Lnot_limit:
 /*
 * For little endian,reverse the low significant equal bits into MSB,then
diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S
index 2ca665711bf2..eae38da6e0bb 100644
--- a/arch/arm64/lib/strnlen.S
+++ b/arch/arm64/lib/strnlen.S
@@ -168,4 +168,4 @@ CPU_LE( lsr	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
 .Lhit_limit:
 	mov	len, limit
 	ret
-ENDPROC(strnlen)
+ENDPIPROC(strnlen)
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
index cfa44a6adc0a..6df07069a025 100644
--- a/arch/arm64/mm/cache.S
+++ b/arch/arm64/mm/cache.S
@@ -81,26 +81,32 @@ ENDPROC(__flush_cache_user_range)
 /*
  *	__flush_dcache_area(kaddr, size)
  *
- *	Ensure that the data held in the page kaddr is written back to the
- *	page in question.
+ *	Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
+ *	are cleaned and invalidated to the PoC.
  *
  *	- kaddr   - kernel address
  *	- size    - size in question
  */
 ENTRY(__flush_dcache_area)
-	dcache_line_size x2, x3
-	add	x1, x0, x1
-	sub	x3, x2, #1
-	bic	x0, x0, x3
-1:	dc	civac, x0			// clean & invalidate D line / unified line
-	add	x0, x0, x2
-	cmp	x0, x1
-	b.lo	1b
-	dsb	sy
+	dcache_by_line_op civac, sy, x0, x1, x2, x3
 	ret
 ENDPIPROC(__flush_dcache_area)
 
 /*
+ *	__clean_dcache_area_pou(kaddr, size)
+ *
+ * 	Ensure that any D-cache lines for the interval [kaddr, kaddr+size)
+ * 	are cleaned to the PoU.
+ *
+ *	- kaddr   - kernel address
+ *	- size    - size in question
+ */
+ENTRY(__clean_dcache_area_pou)
+	dcache_by_line_op cvau, ish, x0, x1, x2, x3
+	ret
+ENDPROC(__clean_dcache_area_pou)
+
+/*
  *	__inval_cache_range(start, end)
  *	- start   - start address of region
  *	- end     - end address of region
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
index f636a2639f03..c90c3c5f46af 100644
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -24,6 +24,7 @@
 
 #include <asm/cpufeature.h>
 #include <asm/mmu_context.h>
+#include <asm/smp.h>
 #include <asm/tlbflush.h>
 
 static u32 asid_bits;
@@ -40,6 +41,45 @@ static cpumask_t tlb_flush_pending;
 #define ASID_FIRST_VERSION	(1UL << asid_bits)
 #define NUM_USER_ASIDS		ASID_FIRST_VERSION
 
+/* Get the ASIDBits supported by the current CPU */
+static u32 get_cpu_asid_bits(void)
+{
+	u32 asid;
+	int fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64MMFR0_EL1),
+						ID_AA64MMFR0_ASID_SHIFT);
+
+	switch (fld) {
+	default:
+		pr_warn("CPU%d: Unknown ASID size (%d); assuming 8-bit\n",
+					smp_processor_id(),  fld);
+		/* Fallthrough */
+	case 0:
+		asid = 8;
+		break;
+	case 2:
+		asid = 16;
+	}
+
+	return asid;
+}
+
+/* Check if the current cpu's ASIDBits is compatible with asid_bits */
+void verify_cpu_asid_bits(void)
+{
+	u32 asid = get_cpu_asid_bits();
+
+	if (asid < asid_bits) {
+		/*
+		 * We cannot decrease the ASID size at runtime, so panic if we support
+		 * fewer ASID bits than the boot CPU.
+		 */
+		pr_crit("CPU%d: smaller ASID size(%u) than boot CPU (%u)\n",
+				smp_processor_id(), asid, asid_bits);
+		update_cpu_boot_status(CPU_PANIC_KERNEL);
+		cpu_park_loop();
+	}
+}
+
 static void flush_context(unsigned int cpu)
 {
 	int i;
@@ -76,13 +116,28 @@ static void flush_context(unsigned int cpu)
 		__flush_icache_all();
 }
 
-static int is_reserved_asid(u64 asid)
+static bool check_update_reserved_asid(u64 asid, u64 newasid)
 {
 	int cpu;
-	for_each_possible_cpu(cpu)
-		if (per_cpu(reserved_asids, cpu) == asid)
-			return 1;
-	return 0;
+	bool hit = false;
+
+	/*
+	 * Iterate over the set of reserved ASIDs looking for a match.
+	 * If we find one, then we can update our mm to use newasid
+	 * (i.e. the same ASID in the current generation) but we can't
+	 * exit the loop early, since we need to ensure that all copies
+	 * of the old ASID are updated to reflect the mm. Failure to do
+	 * so could result in us missing the reserved ASID in a future
+	 * generation.
+	 */
+	for_each_possible_cpu(cpu) {
+		if (per_cpu(reserved_asids, cpu) == asid) {
+			hit = true;
+			per_cpu(reserved_asids, cpu) = newasid;
+		}
+	}
+
+	return hit;
 }
 
 static u64 new_context(struct mm_struct *mm, unsigned int cpu)
@@ -92,12 +147,14 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 	u64 generation = atomic64_read(&asid_generation);
 
 	if (asid != 0) {
+		u64 newasid = generation | (asid & ~ASID_MASK);
+
 		/*
 		 * If our current ASID was active during a rollover, we
 		 * can continue to use it and this was just a false alarm.
 		 */
-		if (is_reserved_asid(asid))
-			return generation | (asid & ~ASID_MASK);
+		if (check_update_reserved_asid(asid, newasid))
+			return newasid;
 
 		/*
 		 * We had a valid ASID in a previous life, so try to re-use
@@ -105,7 +162,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 		 */
 		asid &= ~ASID_MASK;
 		if (!__test_and_set_bit(asid, asid_map))
-			goto bump_gen;
+			return newasid;
 	}
 
 	/*
@@ -129,10 +186,7 @@ static u64 new_context(struct mm_struct *mm, unsigned int cpu)
 set_asid:
 	__set_bit(asid, asid_map);
 	cur_idx = asid;
-
-bump_gen:
-	asid |= generation;
-	return asid;
+	return asid | generation;
 }
 
 void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
@@ -173,19 +227,7 @@ switch_mm_fastpath:
 
 static int asids_init(void)
 {
-	int fld = cpuid_feature_extract_field(read_cpuid(ID_AA64MMFR0_EL1), 4);
-
-	switch (fld) {
-	default:
-		pr_warn("Unknown ASID size (%d); assuming 8-bit\n", fld);
-		/* Fallthrough */
-	case 0:
-		asid_bits = 8;
-		break;
-	case 2:
-		asid_bits = 16;
-	}
-
+	asid_bits = get_cpu_asid_bits();
 	/* If we end up with more CPUs than ASIDs, expect things to crash */
 	WARN_ON(NUM_USER_ASIDS < num_possible_cpus());
 	atomic64_set(&asid_generation, ASID_FIRST_VERSION);
diff --git a/arch/arm64/mm/copypage.c b/arch/arm64/mm/copypage.c
index 13bbc3be6f5a..22e4cb4d6f53 100644
--- a/arch/arm64/mm/copypage.c
+++ b/arch/arm64/mm/copypage.c
@@ -24,8 +24,9 @@
 
 void __cpu_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
 {
+	struct page *page = virt_to_page(kto);
 	copy_page(kto, kfrom);
-	__flush_dcache_area(kto, PAGE_SIZE);
+	flush_dcache_page(page);
 }
 EXPORT_SYMBOL_GPL(__cpu_copy_user_page);
 
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index 6320361d8d4c..a6e757cbab77 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/gfp.h>
+#include <linux/acpi.h>
 #include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/genalloc.h>
@@ -28,9 +29,6 @@
 
 #include <asm/cacheflush.h>
 
-struct dma_map_ops *dma_ops;
-EXPORT_SYMBOL(dma_ops);
-
 static pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot,
 				 bool coherent)
 {
@@ -42,7 +40,7 @@ static pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot,
 static struct gen_pool *atomic_pool;
 
 #define DEFAULT_DMA_COHERENT_POOL_SIZE  SZ_256K
-static size_t atomic_pool_size = DEFAULT_DMA_COHERENT_POOL_SIZE;
+static size_t atomic_pool_size __initdata = DEFAULT_DMA_COHERENT_POOL_SIZE;
 
 static int __init early_coherent_pool(char *p)
 {
@@ -100,7 +98,7 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
 	if (IS_ENABLED(CONFIG_ZONE_DMA) &&
 	    dev->coherent_dma_mask <= DMA_BIT_MASK(32))
 		flags |= GFP_DMA;
-	if (dev_get_cma_area(dev) && (flags & __GFP_WAIT)) {
+	if (dev_get_cma_area(dev) && gfpflags_allow_blocking(flags)) {
 		struct page *page;
 		void *addr;
 
@@ -148,7 +146,7 @@ static void *__dma_alloc(struct device *dev, size_t size,
 
 	size = PAGE_ALIGN(size);
 
-	if (!coherent && !(flags & __GFP_WAIT)) {
+	if (!coherent && !gfpflags_allow_blocking(flags)) {
 		struct page *page = NULL;
 		void *addr = __alloc_from_pool(size, &page, flags);
 
@@ -515,13 +513,7 @@ EXPORT_SYMBOL(dummy_dma_ops);
 
 static int __init arm64_dma_init(void)
 {
-	int ret;
-
-	dma_ops = &swiotlb_dma_ops;
-
-	ret = atomic_pool_init();
-
-	return ret;
+	return atomic_pool_init();
 }
 arch_initcall(arm64_dma_init);
 
@@ -552,21 +544,25 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size,
 {
 	bool coherent = is_device_dma_coherent(dev);
 	int ioprot = dma_direction_to_prot(DMA_BIDIRECTIONAL, coherent);
+	size_t iosize = size;
 	void *addr;
 
 	if (WARN(!dev, "cannot create IOMMU mapping for unknown device\n"))
 		return NULL;
+
+	size = PAGE_ALIGN(size);
+
 	/*
 	 * Some drivers rely on this, and we probably don't want the
 	 * possibility of stale kernel data being read by devices anyway.
 	 */
 	gfp |= __GFP_ZERO;
 
-	if (gfp & __GFP_WAIT) {
+	if (gfpflags_allow_blocking(gfp)) {
 		struct page **pages;
 		pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL, coherent);
 
-		pages = iommu_dma_alloc(dev, size, gfp, ioprot,	handle,
+		pages = iommu_dma_alloc(dev, iosize, gfp, ioprot, handle,
 					flush_page);
 		if (!pages)
 			return NULL;
@@ -574,7 +570,7 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size,
 		addr = dma_common_pages_remap(pages, size, VM_USERMAP, prot,
 					      __builtin_return_address(0));
 		if (!addr)
-			iommu_dma_free(dev, pages, size, handle);
+			iommu_dma_free(dev, pages, iosize, handle);
 	} else {
 		struct page *page;
 		/*
@@ -591,7 +587,7 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size,
 		if (!addr)
 			return NULL;
 
-		*handle = iommu_dma_map_page(dev, page, 0, size, ioprot);
+		*handle = iommu_dma_map_page(dev, page, 0, iosize, ioprot);
 		if (iommu_dma_mapping_error(dev, *handle)) {
 			if (coherent)
 				__free_pages(page, get_order(size));
@@ -606,6 +602,9 @@ static void *__iommu_alloc_attrs(struct device *dev, size_t size,
 static void __iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 			       dma_addr_t handle, struct dma_attrs *attrs)
 {
+	size_t iosize = size;
+
+	size = PAGE_ALIGN(size);
 	/*
 	 * @cpu_addr will be one of 3 things depending on how it was allocated:
 	 * - A remapped array of pages from iommu_dma_alloc(), for all
@@ -617,17 +616,17 @@ static void __iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 	 * Hence how dodgy the below logic looks...
 	 */
 	if (__in_atomic_pool(cpu_addr, size)) {
-		iommu_dma_unmap_page(dev, handle, size, 0, NULL);
+		iommu_dma_unmap_page(dev, handle, iosize, 0, NULL);
 		__free_from_pool(cpu_addr, size);
 	} else if (is_vmalloc_addr(cpu_addr)){
 		struct vm_struct *area = find_vm_area(cpu_addr);
 
 		if (WARN_ON(!area || !area->pages))
 			return;
-		iommu_dma_free(dev, area->pages, size, &handle);
+		iommu_dma_free(dev, area->pages, iosize, &handle);
 		dma_common_free_remap(cpu_addr, size, VM_USERMAP);
 	} else {
-		iommu_dma_unmap_page(dev, handle, size, 0, NULL);
+		iommu_dma_unmap_page(dev, handle, iosize, 0, NULL);
 		__free_pages(virt_to_page(cpu_addr), get_order(size));
 	}
 }
@@ -897,7 +896,7 @@ static int __iommu_attach_notifier(struct notifier_block *nb,
 	return 0;
 }
 
-static int register_iommu_dma_ops_notifier(struct bus_type *bus)
+static int __init register_iommu_dma_ops_notifier(struct bus_type *bus)
 {
 	struct notifier_block *nb = kzalloc(sizeof(*nb), GFP_KERNEL);
 	int ret;
@@ -934,6 +933,10 @@ static int __init __iommu_dma_init(void)
 		ret = register_iommu_dma_ops_notifier(&platform_bus_type);
 	if (!ret)
 		ret = register_iommu_dma_ops_notifier(&amba_bustype);
+
+	/* handle devices queued before this arch_initcall */
+	if (!ret)
+		__iommu_attach_notifier(NULL, BUS_NOTIFY_ADD_DEVICE, NULL);
 	return ret;
 }
 arch_initcall(__iommu_dma_init);
@@ -984,8 +987,8 @@ static void __iommu_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 			struct iommu_ops *iommu, bool coherent)
 {
-	if (!acpi_disabled && !dev->archdata.dma_ops)
-		dev->archdata.dma_ops = dma_ops;
+	if (!dev->archdata.dma_ops)
+		dev->archdata.dma_ops = &swiotlb_dma_ops;
 
 	dev->archdata.dma_coherent = coherent;
 	__iommu_setup_dma_ops(dev, dma_base, size, iommu);
diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c
index 5a22a119a74c..f9271cb2f5e3 100644
--- a/arch/arm64/mm/dump.c
+++ b/arch/arm64/mm/dump.c
@@ -27,15 +27,15 @@
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 
-#define LOWEST_ADDR	(UL(0xffffffffffffffff) << VA_BITS)
-
 struct addr_marker {
 	unsigned long start_address;
 	const char *name;
 };
 
 enum address_markers_idx {
-	VMALLOC_START_NR = 0,
+	MODULES_START_NR = 0,
+	MODULES_END_NR,
+	VMALLOC_START_NR,
 	VMALLOC_END_NR,
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 	VMEMMAP_START_NR,
@@ -45,12 +45,12 @@ enum address_markers_idx {
 	FIXADDR_END_NR,
 	PCI_START_NR,
 	PCI_END_NR,
-	MODULES_START_NR,
-	MODUELS_END_NR,
 	KERNEL_SPACE_NR,
 };
 
 static struct addr_marker address_markers[] = {
+	{ MODULES_VADDR,	"Modules start" },
+	{ MODULES_END,		"Modules end" },
 	{ VMALLOC_START,	"vmalloc() Area" },
 	{ VMALLOC_END,		"vmalloc() End" },
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
@@ -61,9 +61,7 @@ static struct addr_marker address_markers[] = {
 	{ FIXADDR_TOP,		"Fixmap end" },
 	{ PCI_IO_START,		"PCI I/O start" },
 	{ PCI_IO_END,		"PCI I/O end" },
-	{ MODULES_VADDR,	"Modules start" },
-	{ MODULES_END,		"Modules end" },
-	{ PAGE_OFFSET,		"Kernel Mapping" },
+	{ PAGE_OFFSET,		"Linear Mapping" },
 	{ -1,			NULL },
 };
 
@@ -90,6 +88,11 @@ struct prot_bits {
 
 static const struct prot_bits pte_bits[] = {
 	{
+		.mask	= PTE_VALID,
+		.val	= PTE_VALID,
+		.set	= " ",
+		.clear	= "F",
+	}, {
 		.mask	= PTE_USER,
 		.val	= PTE_USER,
 		.set	= "USR",
@@ -316,7 +319,7 @@ static int ptdump_show(struct seq_file *m, void *v)
 		.marker = address_markers,
 	};
 
-	walk_pgd(&st, &init_mm, LOWEST_ADDR);
+	walk_pgd(&st, &init_mm, VA_START);
 
 	note_page(&st, 0, 0, 0);
 	return 0;
diff --git a/arch/arm64/mm/extable.c b/arch/arm64/mm/extable.c
index 79444279ba8c..81acd4706878 100644
--- a/arch/arm64/mm/extable.c
+++ b/arch/arm64/mm/extable.c
@@ -11,7 +11,7 @@ int fixup_exception(struct pt_regs *regs)
 
 	fixup = search_exception_tables(instruction_pointer(regs));
 	if (fixup)
-		regs->pc = fixup->fixup;
+		regs->pc = (unsigned long)&fixup->fixup + fixup->fixup;
 
 	return fixup != NULL;
 }
diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
index 19211c4a8911..95df28bc875f 100644
--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -192,6 +192,14 @@ out:
 	return fault;
 }
 
+static inline int permission_fault(unsigned int esr)
+{
+	unsigned int ec       = (esr & ESR_ELx_EC_MASK) >> ESR_ELx_EC_SHIFT;
+	unsigned int fsc_type = esr & ESR_ELx_FSC_TYPE;
+
+	return (ec == ESR_ELx_EC_DABT_CUR && fsc_type == ESR_ELx_FSC_PERM);
+}
+
 static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 				   struct pt_regs *regs)
 {
@@ -225,12 +233,13 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr,
 		mm_flags |= FAULT_FLAG_WRITE;
 	}
 
-	/*
-	 * PAN bit set implies the fault happened in kernel space, but not
-	 * in the arch's user access functions.
-	 */
-	if (IS_ENABLED(CONFIG_ARM64_PAN) && (regs->pstate & PSR_PAN_BIT))
-		goto no_context;
+	if (permission_fault(esr) && (addr < USER_DS)) {
+		if (get_fs() == KERNEL_DS)
+			die("Accessing user space memory with fs=KERNEL_DS", regs, esr);
+
+		if (!search_exception_tables(regs->pc))
+			die("Accessing user space memory outside uaccess.h routines", regs, esr);
+	}
 
 	/*
 	 * As per x86, we may deadlock here. However, since the kernel only
@@ -295,7 +304,7 @@ retry:
 	up_read(&mm->mmap_sem);
 
 	/*
-	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
+	 * Handle the "normal" case first - VM_FAULT_MAJOR
 	 */
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP |
 			      VM_FAULT_BADACCESS))))
@@ -371,6 +380,13 @@ static int __kprobes do_translation_fault(unsigned long addr,
 	return 0;
 }
 
+static int do_alignment_fault(unsigned long addr, unsigned int esr,
+			      struct pt_regs *regs)
+{
+	do_bad_area(addr, esr, regs);
+	return 0;
+}
+
 /*
  * This abort handler always returns "fault".
  */
@@ -393,16 +409,16 @@ static struct fault_info {
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 1 translation fault"	},
 	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"level 2 translation fault"	},
 	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"level 3 translation fault"	},
-	{ do_bad,		SIGBUS,  0,		"reserved access flag fault"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 8"			},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 1 access flag fault"	},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 access flag fault"	},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 access flag fault"	},
-	{ do_bad,		SIGBUS,  0,		"reserved permission fault"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 12"			},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 1 permission fault"	},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 permission fault"	},
 	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 permission fault"	},
 	{ do_bad,		SIGBUS,  0,		"synchronous external abort"	},
-	{ do_bad,		SIGBUS,  0,		"asynchronous external abort"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 17"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 18"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 19"			},
 	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
@@ -410,16 +426,16 @@ static struct fault_info {
 	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
 	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
 	{ do_bad,		SIGBUS,  0,		"synchronous parity error"	},
-	{ do_bad,		SIGBUS,  0,		"asynchronous parity error"	},
+	{ do_bad,		SIGBUS,  0,		"unknown 25"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 26"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 27"			},
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
-	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk)" },
+	{ do_bad,		SIGBUS,  0,		"synchronous parity error (translation table walk)" },
 	{ do_bad,		SIGBUS,  0,		"unknown 32"			},
-	{ do_bad,		SIGBUS,  BUS_ADRALN,	"alignment fault"		},
-	{ do_bad,		SIGBUS,  0,		"debug event"			},
+	{ do_alignment_fault,	SIGBUS,  BUS_ADRALN,	"alignment fault"		},
+	{ do_bad,		SIGBUS,  0,		"unknown 34"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 35"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 36"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 37"			},
@@ -433,21 +449,21 @@ static struct fault_info {
 	{ do_bad,		SIGBUS,  0,		"unknown 45"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 46"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 47"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 48"			},
+	{ do_bad,		SIGBUS,  0,		"TLB conflict abort"		},
 	{ do_bad,		SIGBUS,  0,		"unknown 49"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 50"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 51"			},
 	{ do_bad,		SIGBUS,  0,		"implementation fault (lockdown abort)" },
-	{ do_bad,		SIGBUS,  0,		"unknown 53"			},
+	{ do_bad,		SIGBUS,  0,		"implementation fault (unsupported exclusive)" },
 	{ do_bad,		SIGBUS,  0,		"unknown 54"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 55"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 56"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 57"			},
-	{ do_bad,		SIGBUS,  0,		"implementation fault (coprocessor abort)" },
+	{ do_bad,		SIGBUS,  0,		"unknown 58" 			},
 	{ do_bad,		SIGBUS,  0,		"unknown 59"			},
 	{ do_bad,		SIGBUS,  0,		"unknown 60"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 61"			},
-	{ do_bad,		SIGBUS,  0,		"unknown 62"			},
+	{ do_bad,		SIGBUS,  0,		"section domain fault"		},
+	{ do_bad,		SIGBUS,  0,		"page domain fault"		},
 	{ do_bad,		SIGBUS,  0,		"unknown 63"			},
 };
 
@@ -561,3 +577,16 @@ void cpu_enable_pan(void *__unused)
 	config_sctlr_el1(SCTLR_EL1_SPAN, 0);
 }
 #endif /* CONFIG_ARM64_PAN */
+
+#ifdef CONFIG_ARM64_UAO
+/*
+ * Kernel threads have fs=KERNEL_DS by default, and don't need to call
+ * set_fs(), devtmpfs in particular relies on this behaviour.
+ * We need to enable the feature at runtime (instead of adding it to
+ * PSR_MODE_EL1h) as the feature may not be implemented by the cpu.
+ */
+void cpu_enable_uao(void *__unused)
+{
+	asm(SET_PSTATE_UAO(1));
+}
+#endif /* CONFIG_ARM64_UAO */
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
index c26b804015e8..dbd12ea8ce68 100644
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -34,36 +34,37 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
 		__flush_icache_all();
 }
 
+static void sync_icache_aliases(void *kaddr, unsigned long len)
+{
+	unsigned long addr = (unsigned long)kaddr;
+
+	if (icache_is_aliasing()) {
+		__clean_dcache_area_pou(kaddr, len);
+		__flush_icache_all();
+	} else {
+		flush_icache_range(addr, addr + len);
+	}
+}
+
 static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 				unsigned long uaddr, void *kaddr,
 				unsigned long len)
 {
-	if (vma->vm_flags & VM_EXEC) {
-		unsigned long addr = (unsigned long)kaddr;
-		if (icache_is_aliasing()) {
-			__flush_dcache_area(kaddr, len);
-			__flush_icache_all();
-		} else {
-			flush_icache_range(addr, addr + len);
-		}
-	}
+	if (vma->vm_flags & VM_EXEC)
+		sync_icache_aliases(kaddr, len);
 }
 
 /*
  * Copy user data from/to a page which is mapped into a different processes
  * address space.  Really, we want to allow our "user space" model to handle
  * this.
- *
- * Note that this code needs to run on the current CPU.
  */
 void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long uaddr, void *dst, const void *src,
 		       unsigned long len)
 {
-	preempt_disable();
 	memcpy(dst, src, len);
 	flush_ptrace_access(vma, page, uaddr, dst, len);
-	preempt_enable();
 }
 
 void __sync_icache_dcache(pte_t pte, unsigned long addr)
@@ -74,13 +75,11 @@ void __sync_icache_dcache(pte_t pte, unsigned long addr)
 	if (!page_mapping(page))
 		return;
 
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags)) {
-		__flush_dcache_area(page_address(page),
-				PAGE_SIZE << compound_order(page));
-		__flush_icache_all();
-	} else if (icache_is_aivivt()) {
+	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
+		sync_icache_aliases(page_address(page),
+				    PAGE_SIZE << compound_order(page));
+	else if (icache_is_aivivt())
 		__flush_icache_all();
-	}
 }
 
 /*
@@ -99,19 +98,3 @@ EXPORT_SYMBOL(flush_dcache_page);
  * Additional functions defined in assembly.
  */
 EXPORT_SYMBOL(flush_icache_range);
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#ifdef CONFIG_HAVE_RCU_TABLE_FREE
-void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
-			  pmd_t *pmdp)
-{
-	pmd_t pmd = pmd_mksplitting(*pmdp);
-
-	VM_BUG_ON(address & ~PMD_MASK);
-	set_pmd_at(vma->vm_mm, address, pmdp, pmd);
-
-	/* dummy IPI to serialise against fast_gup */
-	kick_all_cpus_sync();
-}
-#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index 383b03ff38f8..589fd28e1fb5 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -41,15 +41,273 @@ int pud_huge(pud_t pud)
 #endif
 }
 
+static int find_num_contig(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep, pte_t pte, size_t *pgsize)
+{
+	pgd_t *pgd = pgd_offset(mm, addr);
+	pud_t *pud;
+	pmd_t *pmd;
+
+	*pgsize = PAGE_SIZE;
+	if (!pte_cont(pte))
+		return 1;
+	if (!pgd_present(*pgd)) {
+		VM_BUG_ON(!pgd_present(*pgd));
+		return 1;
+	}
+	pud = pud_offset(pgd, addr);
+	if (!pud_present(*pud)) {
+		VM_BUG_ON(!pud_present(*pud));
+		return 1;
+	}
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd)) {
+		VM_BUG_ON(!pmd_present(*pmd));
+		return 1;
+	}
+	if ((pte_t *)pmd == ptep) {
+		*pgsize = PMD_SIZE;
+		return CONT_PMDS;
+	}
+	return CONT_PTES;
+}
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, pte_t pte)
+{
+	size_t pgsize;
+	int i;
+	int ncontig = find_num_contig(mm, addr, ptep, pte, &pgsize);
+	unsigned long pfn;
+	pgprot_t hugeprot;
+
+	if (ncontig == 1) {
+		set_pte_at(mm, addr, ptep, pte);
+		return;
+	}
+
+	pfn = pte_pfn(pte);
+	hugeprot = __pgprot(pte_val(pfn_pte(pfn, __pgprot(0))) ^ pte_val(pte));
+	for (i = 0; i < ncontig; i++) {
+		pr_debug("%s: set pte %p to 0x%llx\n", __func__, ptep,
+			 pte_val(pfn_pte(pfn, hugeprot)));
+		set_pte_at(mm, addr, ptep, pfn_pte(pfn, hugeprot));
+		ptep++;
+		pfn += pgsize >> PAGE_SHIFT;
+		addr += pgsize;
+	}
+}
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+		      unsigned long addr, unsigned long sz)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pte_t *pte = NULL;
+
+	pr_debug("%s: addr:0x%lx sz:0x%lx\n", __func__, addr, sz);
+	pgd = pgd_offset(mm, addr);
+	pud = pud_alloc(mm, pgd, addr);
+	if (!pud)
+		return NULL;
+
+	if (sz == PUD_SIZE) {
+		pte = (pte_t *)pud;
+	} else if (sz == (PAGE_SIZE * CONT_PTES)) {
+		pmd_t *pmd = pmd_alloc(mm, pud, addr);
+
+		WARN_ON(addr & (sz - 1));
+		/*
+		 * Note that if this code were ever ported to the
+		 * 32-bit arm platform then it will cause trouble in
+		 * the case where CONFIG_HIGHPTE is set, since there
+		 * will be no pte_unmap() to correspond with this
+		 * pte_alloc_map().
+		 */
+		pte = pte_alloc_map(mm, pmd, addr);
+	} else if (sz == PMD_SIZE) {
+		if (IS_ENABLED(CONFIG_ARCH_WANT_HUGE_PMD_SHARE) &&
+		    pud_none(*pud))
+			pte = huge_pmd_share(mm, addr, pud);
+		else
+			pte = (pte_t *)pmd_alloc(mm, pud, addr);
+	} else if (sz == (PMD_SIZE * CONT_PMDS)) {
+		pmd_t *pmd;
+
+		pmd = pmd_alloc(mm, pud, addr);
+		WARN_ON(addr & (sz - 1));
+		return (pte_t *)pmd;
+	}
+
+	pr_debug("%s: addr:0x%lx sz:0x%lx ret pte=%p/0x%llx\n", __func__, addr,
+	       sz, pte, pte_val(*pte));
+	return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd = NULL;
+	pte_t *pte = NULL;
+
+	pgd = pgd_offset(mm, addr);
+	pr_debug("%s: addr:0x%lx pgd:%p\n", __func__, addr, pgd);
+	if (!pgd_present(*pgd))
+		return NULL;
+	pud = pud_offset(pgd, addr);
+	if (!pud_present(*pud))
+		return NULL;
+
+	if (pud_huge(*pud))
+		return (pte_t *)pud;
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd))
+		return NULL;
+
+	if (pte_cont(pmd_pte(*pmd))) {
+		pmd = pmd_offset(
+			pud, (addr & CONT_PMD_MASK));
+		return (pte_t *)pmd;
+	}
+	if (pmd_huge(*pmd))
+		return (pte_t *)pmd;
+	pte = pte_offset_kernel(pmd, addr);
+	if (pte_present(*pte) && pte_cont(*pte)) {
+		pte = pte_offset_kernel(
+			pmd, (addr & CONT_PTE_MASK));
+		return pte;
+	}
+	return NULL;
+}
+
+pte_t arch_make_huge_pte(pte_t entry, struct vm_area_struct *vma,
+			 struct page *page, int writable)
+{
+	size_t pagesize = huge_page_size(hstate_vma(vma));
+
+	if (pagesize == CONT_PTE_SIZE) {
+		entry = pte_mkcont(entry);
+	} else if (pagesize == CONT_PMD_SIZE) {
+		entry = pmd_pte(pmd_mkcont(pte_pmd(entry)));
+	} else if (pagesize != PUD_SIZE && pagesize != PMD_SIZE) {
+		pr_warn("%s: unrecognized huge page size 0x%lx\n",
+			__func__, pagesize);
+	}
+	return entry;
+}
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+			      unsigned long addr, pte_t *ptep)
+{
+	pte_t pte;
+
+	if (pte_cont(*ptep)) {
+		int ncontig, i;
+		size_t pgsize;
+		pte_t *cpte;
+		bool is_dirty = false;
+
+		cpte = huge_pte_offset(mm, addr);
+		ncontig = find_num_contig(mm, addr, cpte, *cpte, &pgsize);
+		/* save the 1st pte to return */
+		pte = ptep_get_and_clear(mm, addr, cpte);
+		for (i = 1; i < ncontig; ++i) {
+			/*
+			 * If HW_AFDBM is enabled, then the HW could
+			 * turn on the dirty bit for any of the page
+			 * in the set, so check them all.
+			 */
+			++cpte;
+			if (pte_dirty(ptep_get_and_clear(mm, addr, cpte)))
+				is_dirty = true;
+		}
+		if (is_dirty)
+			return pte_mkdirty(pte);
+		else
+			return pte;
+	} else {
+		return ptep_get_and_clear(mm, addr, ptep);
+	}
+}
+
+int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+			       unsigned long addr, pte_t *ptep,
+			       pte_t pte, int dirty)
+{
+	pte_t *cpte;
+
+	if (pte_cont(pte)) {
+		int ncontig, i, changed = 0;
+		size_t pgsize = 0;
+		unsigned long pfn = pte_pfn(pte);
+		/* Select all bits except the pfn */
+		pgprot_t hugeprot =
+			__pgprot(pte_val(pfn_pte(pfn, __pgprot(0))) ^
+				 pte_val(pte));
+
+		cpte = huge_pte_offset(vma->vm_mm, addr);
+		pfn = pte_pfn(*cpte);
+		ncontig = find_num_contig(vma->vm_mm, addr, cpte,
+					  *cpte, &pgsize);
+		for (i = 0; i < ncontig; ++i, ++cpte) {
+			changed = ptep_set_access_flags(vma, addr, cpte,
+							pfn_pte(pfn,
+								hugeprot),
+							dirty);
+			pfn += pgsize >> PAGE_SHIFT;
+		}
+		return changed;
+	} else {
+		return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+	}
+}
+
+void huge_ptep_set_wrprotect(struct mm_struct *mm,
+			     unsigned long addr, pte_t *ptep)
+{
+	if (pte_cont(*ptep)) {
+		int ncontig, i;
+		pte_t *cpte;
+		size_t pgsize = 0;
+
+		cpte = huge_pte_offset(mm, addr);
+		ncontig = find_num_contig(mm, addr, cpte, *cpte, &pgsize);
+		for (i = 0; i < ncontig; ++i, ++cpte)
+			ptep_set_wrprotect(mm, addr, cpte);
+	} else {
+		ptep_set_wrprotect(mm, addr, ptep);
+	}
+}
+
+void huge_ptep_clear_flush(struct vm_area_struct *vma,
+			   unsigned long addr, pte_t *ptep)
+{
+	if (pte_cont(*ptep)) {
+		int ncontig, i;
+		pte_t *cpte;
+		size_t pgsize = 0;
+
+		cpte = huge_pte_offset(vma->vm_mm, addr);
+		ncontig = find_num_contig(vma->vm_mm, addr, cpte,
+					  *cpte, &pgsize);
+		for (i = 0; i < ncontig; ++i, ++cpte)
+			ptep_clear_flush(vma, addr, cpte);
+	} else {
+		ptep_clear_flush(vma, addr, ptep);
+	}
+}
+
 static __init int setup_hugepagesz(char *opt)
 {
 	unsigned long ps = memparse(opt, &opt);
+
 	if (ps == PMD_SIZE) {
 		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
 	} else if (ps == PUD_SIZE) {
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
 	} else {
-		pr_err("hugepagesz: Unsupported page size %lu M\n", ps >> 20);
+		pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10);
 		return 0;
 	}
 	return 1;
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 17bf39ac83ba..ea989d83ea9b 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -35,7 +35,10 @@
 #include <linux/efi.h>
 #include <linux/swiotlb.h>
 
+#include <asm/boot.h>
 #include <asm/fixmap.h>
+#include <asm/kasan.h>
+#include <asm/kernel-pgtable.h>
 #include <asm/memory.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
@@ -45,7 +48,13 @@
 
 #include "mm.h"
 
-phys_addr_t memstart_addr __read_mostly = 0;
+/*
+ * We need to be able to catch inadvertent references to memstart_addr
+ * that occur (potentially in generic code) before arm64_memblock_init()
+ * executes, which assigns it its actual value. So use a default value
+ * that cannot be mistaken for a real physical address.
+ */
+s64 memstart_addr __read_mostly = -1;
 phys_addr_t arm64_dma_phys_limit __read_mostly;
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -58,8 +67,8 @@ static int __init early_initrd(char *p)
 	if (*endp == ',') {
 		size = memparse(endp + 1, NULL);
 
-		initrd_start = (unsigned long)__va(start);
-		initrd_end = (unsigned long)__va(start + size);
+		initrd_start = start;
+		initrd_end = start + size;
 	}
 	return 0;
 }
@@ -71,7 +80,7 @@ early_param("initrd", early_initrd);
  * currently assumes that for memory starting above 4G, 32-bit devices will
  * use a DMA offset.
  */
-static phys_addr_t max_zone_dma_phys(void)
+static phys_addr_t __init max_zone_dma_phys(void)
 {
 	phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
 	return min(offset + (1ULL << 32), memblock_end_of_DRAM());
@@ -120,17 +129,17 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
-	return memblock_is_memory(pfn << PAGE_SHIFT);
+	return memblock_is_map_memory(pfn << PAGE_SHIFT);
 }
 EXPORT_SYMBOL(pfn_valid);
 #endif
 
 #ifndef CONFIG_SPARSEMEM
-static void arm64_memory_present(void)
+static void __init arm64_memory_present(void)
 {
 }
 #else
-static void arm64_memory_present(void)
+static void __init arm64_memory_present(void)
 {
 	struct memblock_region *reg;
 
@@ -159,7 +168,57 @@ early_param("mem", early_mem);
 
 void __init arm64_memblock_init(void)
 {
-	memblock_enforce_memory_limit(memory_limit);
+	const s64 linear_region_size = -(s64)PAGE_OFFSET;
+
+	/*
+	 * Ensure that the linear region takes up exactly half of the kernel
+	 * virtual address space. This way, we can distinguish a linear address
+	 * from a kernel/module/vmalloc address by testing a single bit.
+	 */
+	BUILD_BUG_ON(linear_region_size != BIT(VA_BITS - 1));
+
+	/*
+	 * Select a suitable value for the base of physical memory.
+	 */
+	memstart_addr = round_down(memblock_start_of_DRAM(),
+				   ARM64_MEMSTART_ALIGN);
+
+	/*
+	 * Remove the memory that we will not be able to cover with the
+	 * linear mapping. Take care not to clip the kernel which may be
+	 * high in memory.
+	 */
+	memblock_remove(max_t(u64, memstart_addr + linear_region_size, __pa(_end)),
+			ULLONG_MAX);
+	if (memblock_end_of_DRAM() > linear_region_size)
+		memblock_remove(0, memblock_end_of_DRAM() - linear_region_size);
+
+	/*
+	 * Apply the memory limit if it was set. Since the kernel may be loaded
+	 * high up in memory, add back the kernel region that must be accessible
+	 * via the linear mapping.
+	 */
+	if (memory_limit != (phys_addr_t)ULLONG_MAX) {
+		memblock_enforce_memory_limit(memory_limit);
+		memblock_add(__pa(_text), (u64)(_end - _text));
+	}
+
+	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
+		extern u16 memstart_offset_seed;
+		u64 range = linear_region_size -
+			    (memblock_end_of_DRAM() - memblock_start_of_DRAM());
+
+		/*
+		 * If the size of the linear region exceeds, by a sufficient
+		 * margin, the size of the region that the available physical
+		 * memory spans, randomize the linear region as well.
+		 */
+		if (memstart_offset_seed > 0 && range >= ARM64_MEMSTART_ALIGN) {
+			range = range / ARM64_MEMSTART_ALIGN + 1;
+			memstart_addr -= ARM64_MEMSTART_ALIGN *
+					 ((range * memstart_offset_seed) >> 16);
+		}
+	}
 
 	/*
 	 * Register the kernel text, kernel data, initrd, and initial
@@ -167,8 +226,13 @@ void __init arm64_memblock_init(void)
 	 */
 	memblock_reserve(__pa(_text), _end - _text);
 #ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
+	if (initrd_start) {
+		memblock_reserve(initrd_start, initrd_end - initrd_start);
+
+		/* the generic initrd code expects virtual addresses */
+		initrd_start = __phys_to_virt(initrd_start);
+		initrd_end = __phys_to_virt(initrd_end);
+	}
 #endif
 
 	early_init_fdt_scan_reserved_mem();
@@ -298,39 +362,38 @@ void __init mem_init(void)
 #define MLG(b, t) b, t, ((t) - (b)) >> 30
 #define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
 
-	pr_notice("Virtual kernel memory layout:\n"
-#ifdef CONFIG_KASAN
-		  "    kasan   : 0x%16lx - 0x%16lx   (%6ld GB)\n"
-#endif
-		  "    vmalloc : 0x%16lx - 0x%16lx   (%6ld GB)\n"
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-		  "    vmemmap : 0x%16lx - 0x%16lx   (%6ld GB maximum)\n"
-		  "              0x%16lx - 0x%16lx   (%6ld MB actual)\n"
-#endif
-		  "    fixed   : 0x%16lx - 0x%16lx   (%6ld KB)\n"
-		  "    PCI I/O : 0x%16lx - 0x%16lx   (%6ld MB)\n"
-		  "    modules : 0x%16lx - 0x%16lx   (%6ld MB)\n"
-		  "    memory  : 0x%16lx - 0x%16lx   (%6ld MB)\n"
-		  "      .init : 0x%p" " - 0x%p" "   (%6ld KB)\n"
-		  "      .text : 0x%p" " - 0x%p" "   (%6ld KB)\n"
-		  "      .data : 0x%p" " - 0x%p" "   (%6ld KB)\n",
+	pr_notice("Virtual kernel memory layout:\n");
 #ifdef CONFIG_KASAN
-		  MLG(KASAN_SHADOW_START, KASAN_SHADOW_END),
+	pr_cont("    kasan   : 0x%16lx - 0x%16lx   (%6ld GB)\n",
+		MLG(KASAN_SHADOW_START, KASAN_SHADOW_END));
 #endif
-		  MLG(VMALLOC_START, VMALLOC_END),
+	pr_cont("    modules : 0x%16lx - 0x%16lx   (%6ld MB)\n",
+		MLM(MODULES_VADDR, MODULES_END));
+	pr_cont("    vmalloc : 0x%16lx - 0x%16lx   (%6ld GB)\n",
+		MLG(VMALLOC_START, VMALLOC_END));
+	pr_cont("      .text : 0x%p" " - 0x%p" "   (%6ld KB)\n"
+		"    .rodata : 0x%p" " - 0x%p" "   (%6ld KB)\n"
+		"      .init : 0x%p" " - 0x%p" "   (%6ld KB)\n"
+		"      .data : 0x%p" " - 0x%p" "   (%6ld KB)\n",
+		MLK_ROUNDUP(_text, __start_rodata),
+		MLK_ROUNDUP(__start_rodata, _etext),
+		MLK_ROUNDUP(__init_begin, __init_end),
+		MLK_ROUNDUP(_sdata, _edata));
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
-		  MLG((unsigned long)vmemmap,
-		      (unsigned long)vmemmap + VMEMMAP_SIZE),
-		  MLM((unsigned long)virt_to_page(PAGE_OFFSET),
-		      (unsigned long)virt_to_page(high_memory)),
+	pr_cont("    vmemmap : 0x%16lx - 0x%16lx   (%6ld GB maximum)\n"
+		"              0x%16lx - 0x%16lx   (%6ld MB actual)\n",
+		MLG(VMEMMAP_START,
+		    VMEMMAP_START + VMEMMAP_SIZE),
+		MLM((unsigned long)phys_to_page(memblock_start_of_DRAM()),
+		    (unsigned long)virt_to_page(high_memory)));
 #endif
-		  MLK(FIXADDR_START, FIXADDR_TOP),
-		  MLM(PCI_IO_START, PCI_IO_END),
-		  MLM(MODULES_VADDR, MODULES_END),
-		  MLM(PAGE_OFFSET, (unsigned long)high_memory),
-		  MLK_ROUNDUP(__init_begin, __init_end),
-		  MLK_ROUNDUP(_text, _etext),
-		  MLK_ROUNDUP(_sdata, _edata));
+	pr_cont("    fixed   : 0x%16lx - 0x%16lx   (%6ld KB)\n",
+		MLK(FIXADDR_START, FIXADDR_TOP));
+	pr_cont("    PCI I/O : 0x%16lx - 0x%16lx   (%6ld MB)\n",
+		MLM(PCI_IO_START, PCI_IO_END));
+	pr_cont("    memory  : 0x%16lx - 0x%16lx   (%6ld MB)\n",
+		MLM(__phys_to_virt(memblock_start_of_DRAM()),
+		    (unsigned long)high_memory));
 
 #undef MLK
 #undef MLM
@@ -343,8 +406,6 @@ void __init mem_init(void)
 #ifdef CONFIG_COMPAT
 	BUILD_BUG_ON(TASK_SIZE_32			> TASK_SIZE_64);
 #endif
-	BUILD_BUG_ON(TASK_SIZE_64			> MODULES_VADDR);
-	BUG_ON(TASK_SIZE_64				> MODULES_VADDR);
 
 	if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
 		extern int sysctl_overcommit_memory;
@@ -358,9 +419,8 @@ void __init mem_init(void)
 
 void free_initmem(void)
 {
-	fixup_init();
 	free_initmem_default(0);
-	free_alternatives_memory();
+	fixup_init();
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -381,3 +441,28 @@ static int __init keepinitrd_setup(char *__unused)
 
 __setup("keepinitrd", keepinitrd_setup);
 #endif
+
+/*
+ * Dump out memory limit information on panic.
+ */
+static int dump_mem_limit(struct notifier_block *self, unsigned long v, void *p)
+{
+	if (memory_limit != (phys_addr_t)ULLONG_MAX) {
+		pr_emerg("Memory Limit: %llu MB\n", memory_limit >> 20);
+	} else {
+		pr_emerg("Memory Limit: none\n");
+	}
+	return 0;
+}
+
+static struct notifier_block mem_limit_notifier = {
+	.notifier_call = dump_mem_limit,
+};
+
+static int __init register_mem_limit_dumper(void)
+{
+	atomic_notifier_chain_register(&panic_notifier_list,
+				       &mem_limit_notifier);
+	return 0;
+}
+__initcall(register_mem_limit_dumper);
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index cf038c7d9fa9..757009daa9ed 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -16,9 +16,12 @@
 #include <linux/memblock.h>
 #include <linux/start_kernel.h>
 
+#include <asm/mmu_context.h>
+#include <asm/kernel-pgtable.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
+#include <asm/sections.h>
 #include <asm/tlbflush.h>
 
 static pgd_t tmp_pg_dir[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
@@ -32,7 +35,7 @@ static void __init kasan_early_pte_populate(pmd_t *pmd, unsigned long addr,
 	if (pmd_none(*pmd))
 		pmd_populate_kernel(&init_mm, pmd, kasan_zero_pte);
 
-	pte = pte_offset_kernel(pmd, addr);
+	pte = pte_offset_kimg(pmd, addr);
 	do {
 		next = addr + PAGE_SIZE;
 		set_pte(pte, pfn_pte(virt_to_pfn(kasan_zero_page),
@@ -50,7 +53,7 @@ static void __init kasan_early_pmd_populate(pud_t *pud,
 	if (pud_none(*pud))
 		pud_populate(&init_mm, pud, kasan_zero_pmd);
 
-	pmd = pmd_offset(pud, addr);
+	pmd = pmd_offset_kimg(pud, addr);
 	do {
 		next = pmd_addr_end(addr, end);
 		kasan_early_pte_populate(pmd, addr, next);
@@ -67,7 +70,7 @@ static void __init kasan_early_pud_populate(pgd_t *pgd,
 	if (pgd_none(*pgd))
 		pgd_populate(&init_mm, pgd, kasan_zero_pud);
 
-	pud = pud_offset(pgd, addr);
+	pud = pud_offset_kimg(pgd, addr);
 	do {
 		next = pud_addr_end(addr, end);
 		kasan_early_pmd_populate(pud, addr, next);
@@ -96,6 +99,21 @@ asmlinkage void __init kasan_early_init(void)
 	kasan_map_early_shadow();
 }
 
+/*
+ * Copy the current shadow region into a new pgdir.
+ */
+void __init kasan_copy_shadow(pgd_t *pgdir)
+{
+	pgd_t *pgd, *pgd_new, *pgd_end;
+
+	pgd = pgd_offset_k(KASAN_SHADOW_START);
+	pgd_end = pgd_offset_k(KASAN_SHADOW_END);
+	pgd_new = pgd_offset_raw(pgdir, KASAN_SHADOW_START);
+	do {
+		set_pgd(pgd_new, *pgd);
+	} while (pgd++, pgd_new++, pgd != pgd_end);
+}
+
 static void __init clear_pgds(unsigned long start,
 			unsigned long end)
 {
@@ -108,18 +126,18 @@ static void __init clear_pgds(unsigned long start,
 		set_pgd(pgd_offset_k(start), __pgd(0));
 }
 
-static void __init cpu_set_ttbr1(unsigned long ttbr1)
-{
-	asm(
-	"	msr	ttbr1_el1, %0\n"
-	"	isb"
-	:
-	: "r" (ttbr1));
-}
-
 void __init kasan_init(void)
 {
+	u64 kimg_shadow_start, kimg_shadow_end;
+	u64 mod_shadow_start, mod_shadow_end;
 	struct memblock_region *reg;
+	int i;
+
+	kimg_shadow_start = (u64)kasan_mem_to_shadow(_text);
+	kimg_shadow_end = (u64)kasan_mem_to_shadow(_end);
+
+	mod_shadow_start = (u64)kasan_mem_to_shadow((void *)MODULES_VADDR);
+	mod_shadow_end = (u64)kasan_mem_to_shadow((void *)MODULES_END);
 
 	/*
 	 * We are going to perform proper setup of shadow memory.
@@ -129,13 +147,33 @@ void __init kasan_init(void)
 	 * setup will be finished.
 	 */
 	memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
-	cpu_set_ttbr1(__pa(tmp_pg_dir));
-	flush_tlb_all();
+	dsb(ishst);
+	cpu_replace_ttbr1(tmp_pg_dir);
 
 	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
 
+	vmemmap_populate(kimg_shadow_start, kimg_shadow_end,
+			 pfn_to_nid(virt_to_pfn(_text)));
+
+	/*
+	 * vmemmap_populate() has populated the shadow region that covers the
+	 * kernel image with SWAPPER_BLOCK_SIZE mappings, so we have to round
+	 * the start and end addresses to SWAPPER_BLOCK_SIZE as well, to prevent
+	 * kasan_populate_zero_shadow() from replacing the page table entries
+	 * (PMD or PTE) at the edges of the shadow region for the kernel
+	 * image.
+	 */
+	kimg_shadow_start = round_down(kimg_shadow_start, SWAPPER_BLOCK_SIZE);
+	kimg_shadow_end = round_up(kimg_shadow_end, SWAPPER_BLOCK_SIZE);
+
 	kasan_populate_zero_shadow((void *)KASAN_SHADOW_START,
-			kasan_mem_to_shadow((void *)MODULES_VADDR));
+				   (void *)mod_shadow_start);
+	kasan_populate_zero_shadow((void *)kimg_shadow_end,
+				   kasan_mem_to_shadow((void *)PAGE_OFFSET));
+
+	if (kimg_shadow_start > mod_shadow_end)
+		kasan_populate_zero_shadow((void *)mod_shadow_end,
+					   (void *)kimg_shadow_start);
 
 	for_each_memblock(memory, reg) {
 		void *start = (void *)__phys_to_virt(reg->base);
@@ -155,9 +193,16 @@ void __init kasan_init(void)
 				pfn_to_nid(virt_to_pfn(start)));
 	}
 
+	/*
+	 * KAsan may reuse the contents of kasan_zero_pte directly, so we
+	 * should make sure that it maps the zero page read-only.
+	 */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte(&kasan_zero_pte[i],
+			pfn_pte(virt_to_pfn(kasan_zero_page), PAGE_KERNEL_RO));
+
 	memset(kasan_zero_page, 0, PAGE_SIZE);
-	cpu_set_ttbr1(__pa(swapper_pg_dir));
-	flush_tlb_all();
+	cpu_replace_ttbr1(swapper_pg_dir);
 
 	/* At this point kasan is fully initialized. Enable error messages */
 	init_task.kasan_depth = 0;
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
index ed177475dd8c..232f787a088a 100644
--- a/arch/arm64/mm/mmap.c
+++ b/arch/arm64/mm/mmap.c
@@ -51,8 +51,12 @@ unsigned long arch_mmap_rnd(void)
 {
 	unsigned long rnd;
 
-	rnd = (unsigned long)get_random_int() & STACK_RND_MASK;
-
+#ifdef CONFIG_COMPAT
+	if (test_thread_flag(TIF_32BIT))
+		rnd = get_random_long() & ((1UL << mmap_rnd_compat_bits) - 1);
+	else
+#endif
+		rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
 	return rnd << PAGE_SHIFT;
 }
 
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index c2fa6b56613c..f3e5c74233f3 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -30,8 +30,10 @@
 #include <linux/slab.h>
 #include <linux/stop_machine.h>
 
+#include <asm/barrier.h>
 #include <asm/cputype.h>
 #include <asm/fixmap.h>
+#include <asm/kasan.h>
 #include <asm/kernel-pgtable.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
@@ -44,13 +46,20 @@
 
 u64 idmap_t0sz = TCR_T0SZ(VA_BITS);
 
+u64 kimage_voffset __read_mostly;
+EXPORT_SYMBOL(kimage_voffset);
+
 /*
  * Empty_zero_page is a special page that is used for zero-initialized data
  * and COW.
  */
-struct page *empty_zero_page;
+unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)] __page_aligned_bss;
 EXPORT_SYMBOL(empty_zero_page);
 
+static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
+static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
+static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
+
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 			      unsigned long size, pgprot_t vma_prot)
 {
@@ -62,12 +71,30 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 }
 EXPORT_SYMBOL(phys_mem_access_prot);
 
-static void __init *early_alloc(unsigned long sz)
+static phys_addr_t __init early_pgtable_alloc(void)
 {
-	void *ptr = __va(memblock_alloc(sz, sz));
-	BUG_ON(!ptr);
-	memset(ptr, 0, sz);
-	return ptr;
+	phys_addr_t phys;
+	void *ptr;
+
+	phys = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
+	BUG_ON(!phys);
+
+	/*
+	 * The FIX_{PGD,PUD,PMD} slots may be in active use, but the FIX_PTE
+	 * slot will be free, so we can (ab)use the FIX_PTE slot to initialise
+	 * any level of table.
+	 */
+	ptr = pte_set_fixmap(phys);
+
+	memset(ptr, 0, PAGE_SIZE);
+
+	/*
+	 * Implicit barriers also ensure the zeroed page is visible to the page
+	 * table walker
+	 */
+	pte_clear_fixmap();
+
+	return phys;
 }
 
 /*
@@ -81,91 +108,43 @@ static void split_pmd(pmd_t *pmd, pte_t *pte)
 	do {
 		/*
 		 * Need to have the least restrictive permissions available
-		 * permissions will be fixed up later. Default the new page
-		 * range as contiguous ptes.
+		 * permissions will be fixed up later
 		 */
-		set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC_CONT));
+		set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
 		pfn++;
 	} while (pte++, i++, i < PTRS_PER_PTE);
 }
 
-/*
- * Given a PTE with the CONT bit set, determine where the CONT range
- * starts, and clear the entire range of PTE CONT bits.
- */
-static void clear_cont_pte_range(pte_t *pte, unsigned long addr)
-{
-	int i;
-
-	pte -= CONT_RANGE_OFFSET(addr);
-	for (i = 0; i < CONT_PTES; i++) {
-		set_pte(pte, pte_mknoncont(*pte));
-		pte++;
-	}
-	flush_tlb_all();
-}
-
-/*
- * Given a range of PTEs set the pfn and provided page protection flags
- */
-static void __populate_init_pte(pte_t *pte, unsigned long addr,
-				unsigned long end, phys_addr_t phys,
-				pgprot_t prot)
-{
-	unsigned long pfn = __phys_to_pfn(phys);
-
-	do {
-		/* clear all the bits except the pfn, then apply the prot */
-		set_pte(pte, pfn_pte(pfn, prot));
-		pte++;
-		pfn++;
-		addr += PAGE_SIZE;
-	} while (addr != end);
-}
-
 static void alloc_init_pte(pmd_t *pmd, unsigned long addr,
-				  unsigned long end, phys_addr_t phys,
+				  unsigned long end, unsigned long pfn,
 				  pgprot_t prot,
-				  void *(*alloc)(unsigned long size))
+				  phys_addr_t (*pgtable_alloc)(void))
 {
 	pte_t *pte;
-	unsigned long next;
 
 	if (pmd_none(*pmd) || pmd_sect(*pmd)) {
-		pte = alloc(PTRS_PER_PTE * sizeof(pte_t));
+		phys_addr_t pte_phys;
+		BUG_ON(!pgtable_alloc);
+		pte_phys = pgtable_alloc();
+		pte = pte_set_fixmap(pte_phys);
 		if (pmd_sect(*pmd))
 			split_pmd(pmd, pte);
-		__pmd_populate(pmd, __pa(pte), PMD_TYPE_TABLE);
+		__pmd_populate(pmd, pte_phys, PMD_TYPE_TABLE);
 		flush_tlb_all();
+		pte_clear_fixmap();
 	}
 	BUG_ON(pmd_bad(*pmd));
 
-	pte = pte_offset_kernel(pmd, addr);
+	pte = pte_set_fixmap_offset(pmd, addr);
 	do {
-		next = min(end, (addr + CONT_SIZE) & CONT_MASK);
-		if (((addr | next | phys) & ~CONT_MASK) == 0) {
-			/* a block of CONT_PTES  */
-			__populate_init_pte(pte, addr, next, phys,
-					    prot | __pgprot(PTE_CONT));
-		} else {
-			/*
-			 * If the range being split is already inside of a
-			 * contiguous range but this PTE isn't going to be
-			 * contiguous, then we want to unmark the adjacent
-			 * ranges, then update the portion of the range we
-			 * are interrested in.
-			 */
-			 clear_cont_pte_range(pte, addr);
-			 __populate_init_pte(pte, addr, next, phys, prot);
-		}
+		set_pte(pte, pfn_pte(pfn, prot));
+		pfn++;
+	} while (pte++, addr += PAGE_SIZE, addr != end);
 
-		pte += (next - addr) >> PAGE_SHIFT;
-		phys += next - addr;
-		addr = next;
-	} while (addr != end);
+	pte_clear_fixmap();
 }
 
-void split_pud(pud_t *old_pud, pmd_t *pmd)
+static void split_pud(pud_t *old_pud, pmd_t *pmd)
 {
 	unsigned long addr = pud_pfn(*old_pud) << PAGE_SHIFT;
 	pgprot_t prot = __pgprot(pud_val(*old_pud) ^ addr);
@@ -177,10 +156,29 @@ void split_pud(pud_t *old_pud, pmd_t *pmd)
 	} while (pmd++, i++, i < PTRS_PER_PMD);
 }
 
-static void alloc_init_pmd(struct mm_struct *mm, pud_t *pud,
-				  unsigned long addr, unsigned long end,
+#ifdef CONFIG_DEBUG_PAGEALLOC
+static bool block_mappings_allowed(phys_addr_t (*pgtable_alloc)(void))
+{
+
+	/*
+	 * If debug_page_alloc is enabled we must map the linear map
+	 * using pages. However, other mappings created by
+	 * create_mapping_noalloc must use sections in some cases. Allow
+	 * sections to be used in those cases, where no pgtable_alloc
+	 * function is provided.
+	 */
+	return !pgtable_alloc || !debug_pagealloc_enabled();
+}
+#else
+static bool block_mappings_allowed(phys_addr_t (*pgtable_alloc)(void))
+{
+	return true;
+}
+#endif
+
+static void alloc_init_pmd(pud_t *pud, unsigned long addr, unsigned long end,
 				  phys_addr_t phys, pgprot_t prot,
-				  void *(*alloc)(unsigned long size))
+				  phys_addr_t (*pgtable_alloc)(void))
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -189,7 +187,10 @@ static void alloc_init_pmd(struct mm_struct *mm, pud_t *pud,
 	 * Check for initial section mappings in the pgd/pud and remove them.
 	 */
 	if (pud_none(*pud) || pud_sect(*pud)) {
-		pmd = alloc(PTRS_PER_PMD * sizeof(pmd_t));
+		phys_addr_t pmd_phys;
+		BUG_ON(!pgtable_alloc);
+		pmd_phys = pgtable_alloc();
+		pmd = pmd_set_fixmap(pmd_phys);
 		if (pud_sect(*pud)) {
 			/*
 			 * need to have the 1G of mappings continue to be
@@ -197,19 +198,20 @@ static void alloc_init_pmd(struct mm_struct *mm, pud_t *pud,
 			 */
 			split_pud(pud, pmd);
 		}
-		pud_populate(mm, pud, pmd);
+		__pud_populate(pud, pmd_phys, PUD_TYPE_TABLE);
 		flush_tlb_all();
+		pmd_clear_fixmap();
 	}
 	BUG_ON(pud_bad(*pud));
 
-	pmd = pmd_offset(pud, addr);
+	pmd = pmd_set_fixmap_offset(pud, addr);
 	do {
 		next = pmd_addr_end(addr, end);
 		/* try section mapping first */
-		if (((addr | next | phys) & ~SECTION_MASK) == 0) {
+		if (((addr | next | phys) & ~SECTION_MASK) == 0 &&
+		      block_mappings_allowed(pgtable_alloc)) {
 			pmd_t old_pmd =*pmd;
-			set_pmd(pmd, __pmd(phys |
-					   pgprot_val(mk_sect_prot(prot))));
+			pmd_set_huge(pmd, phys, prot);
 			/*
 			 * Check for previous table entries created during
 			 * boot (__create_page_tables) and flush them.
@@ -217,16 +219,19 @@ static void alloc_init_pmd(struct mm_struct *mm, pud_t *pud,
 			if (!pmd_none(old_pmd)) {
 				flush_tlb_all();
 				if (pmd_table(old_pmd)) {
-					phys_addr_t table = __pa(pte_offset_map(&old_pmd, 0));
+					phys_addr_t table = pmd_page_paddr(old_pmd);
 					if (!WARN_ON_ONCE(slab_is_available()))
 						memblock_free(table, PAGE_SIZE);
 				}
 			}
 		} else {
-			alloc_init_pte(pmd, addr, next, phys, prot, alloc);
+			alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys),
+				       prot, pgtable_alloc);
 		}
 		phys += next - addr;
 	} while (pmd++, addr = next, addr != end);
+
+	pmd_clear_fixmap();
 }
 
 static inline bool use_1G_block(unsigned long addr, unsigned long next,
@@ -241,31 +246,32 @@ static inline bool use_1G_block(unsigned long addr, unsigned long next,
 	return true;
 }
 
-static void alloc_init_pud(struct mm_struct *mm, pgd_t *pgd,
-				  unsigned long addr, unsigned long end,
+static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
 				  phys_addr_t phys, pgprot_t prot,
-				  void *(*alloc)(unsigned long size))
+				  phys_addr_t (*pgtable_alloc)(void))
 {
 	pud_t *pud;
 	unsigned long next;
 
 	if (pgd_none(*pgd)) {
-		pud = alloc(PTRS_PER_PUD * sizeof(pud_t));
-		pgd_populate(mm, pgd, pud);
+		phys_addr_t pud_phys;
+		BUG_ON(!pgtable_alloc);
+		pud_phys = pgtable_alloc();
+		__pgd_populate(pgd, pud_phys, PUD_TYPE_TABLE);
 	}
 	BUG_ON(pgd_bad(*pgd));
 
-	pud = pud_offset(pgd, addr);
+	pud = pud_set_fixmap_offset(pgd, addr);
 	do {
 		next = pud_addr_end(addr, end);
 
 		/*
 		 * For 4K granule only, attempt to put down a 1GB block
 		 */
-		if (use_1G_block(addr, next, phys)) {
+		if (use_1G_block(addr, next, phys) &&
+		    block_mappings_allowed(pgtable_alloc)) {
 			pud_t old_pud = *pud;
-			set_pud(pud, __pud(phys |
-					   pgprot_val(mk_sect_prot(prot))));
+			pud_set_huge(pud, phys, prot);
 
 			/*
 			 * If we have an old value for a pud, it will
@@ -277,51 +283,74 @@ static void alloc_init_pud(struct mm_struct *mm, pgd_t *pgd,
 			if (!pud_none(old_pud)) {
 				flush_tlb_all();
 				if (pud_table(old_pud)) {
-					phys_addr_t table = __pa(pmd_offset(&old_pud, 0));
+					phys_addr_t table = pud_page_paddr(old_pud);
 					if (!WARN_ON_ONCE(slab_is_available()))
 						memblock_free(table, PAGE_SIZE);
 				}
 			}
 		} else {
-			alloc_init_pmd(mm, pud, addr, next, phys, prot, alloc);
+			alloc_init_pmd(pud, addr, next, phys, prot,
+				       pgtable_alloc);
 		}
 		phys += next - addr;
 	} while (pud++, addr = next, addr != end);
+
+	pud_clear_fixmap();
 }
 
 /*
  * Create the page directory entries and any necessary page tables for the
  * mapping specified by 'md'.
  */
-static void  __create_mapping(struct mm_struct *mm, pgd_t *pgd,
-				    phys_addr_t phys, unsigned long virt,
+static void init_pgd(pgd_t *pgd, phys_addr_t phys, unsigned long virt,
 				    phys_addr_t size, pgprot_t prot,
-				    void *(*alloc)(unsigned long size))
+				    phys_addr_t (*pgtable_alloc)(void))
 {
 	unsigned long addr, length, end, next;
 
+	/*
+	 * If the virtual and physical address don't have the same offset
+	 * within a page, we cannot map the region as the caller expects.
+	 */
+	if (WARN_ON((phys ^ virt) & ~PAGE_MASK))
+		return;
+
+	phys &= PAGE_MASK;
 	addr = virt & PAGE_MASK;
 	length = PAGE_ALIGN(size + (virt & ~PAGE_MASK));
 
 	end = addr + length;
 	do {
 		next = pgd_addr_end(addr, end);
-		alloc_init_pud(mm, pgd, addr, next, phys, prot, alloc);
+		alloc_init_pud(pgd, addr, next, phys, prot, pgtable_alloc);
 		phys += next - addr;
 	} while (pgd++, addr = next, addr != end);
 }
 
-static void *late_alloc(unsigned long size)
+static phys_addr_t late_pgtable_alloc(void)
 {
-	void *ptr;
-
-	BUG_ON(size > PAGE_SIZE);
-	ptr = (void *)__get_free_page(PGALLOC_GFP);
+	void *ptr = (void *)__get_free_page(PGALLOC_GFP);
 	BUG_ON(!ptr);
-	return ptr;
+
+	/* Ensure the zeroed page is visible to the page table walker */
+	dsb(ishst);
+	return __pa(ptr);
+}
+
+static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
+				 unsigned long virt, phys_addr_t size,
+				 pgprot_t prot,
+				 phys_addr_t (*alloc)(void))
+{
+	init_pgd(pgd_offset_raw(pgdir, virt), phys, virt, size, prot, alloc);
 }
 
-static void __init create_mapping(phys_addr_t phys, unsigned long virt,
+/*
+ * This function can only be used to modify existing table entries,
+ * without allocating new levels of table. Note that this permits the
+ * creation of new section or page entries.
+ */
+static void __init create_mapping_noalloc(phys_addr_t phys, unsigned long virt,
 				  phys_addr_t size, pgprot_t prot)
 {
 	if (virt < VMALLOC_START) {
@@ -329,16 +358,16 @@ static void __init create_mapping(phys_addr_t phys, unsigned long virt,
 			&phys, virt);
 		return;
 	}
-	__create_mapping(&init_mm, pgd_offset_k(virt & PAGE_MASK), phys, virt,
-			 size, prot, early_alloc);
+	__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot,
+			     NULL);
 }
 
 void __init create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
 			       unsigned long virt, phys_addr_t size,
 			       pgprot_t prot)
 {
-	__create_mapping(mm, pgd_offset(mm, virt), phys, virt, size, prot,
-				late_alloc);
+	__create_pgd_mapping(mm->pgd, phys, virt, size, prot,
+			     late_pgtable_alloc);
 }
 
 static void create_mapping_late(phys_addr_t phys, unsigned long virt,
@@ -350,69 +379,57 @@ static void create_mapping_late(phys_addr_t phys, unsigned long virt,
 		return;
 	}
 
-	return __create_mapping(&init_mm, pgd_offset_k(virt & PAGE_MASK),
-				phys, virt, size, prot, late_alloc);
+	__create_pgd_mapping(init_mm.pgd, phys, virt, size, prot,
+			     late_pgtable_alloc);
 }
 
-#ifdef CONFIG_DEBUG_RODATA
-static void __init __map_memblock(phys_addr_t start, phys_addr_t end)
+static void __init __map_memblock(pgd_t *pgd, phys_addr_t start, phys_addr_t end)
 {
+	unsigned long kernel_start = __pa(_stext);
+	unsigned long kernel_end = __pa(_etext);
+
 	/*
-	 * Set up the executable regions using the existing section mappings
-	 * for now. This will get more fine grained later once all memory
-	 * is mapped
+	 * Take care not to create a writable alias for the
+	 * read-only text and rodata sections of the kernel image.
 	 */
-	unsigned long kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
-	unsigned long kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
-
-	if (end < kernel_x_start) {
-		create_mapping(start, __phys_to_virt(start),
-			end - start, PAGE_KERNEL);
-	} else if (start >= kernel_x_end) {
-		create_mapping(start, __phys_to_virt(start),
-			end - start, PAGE_KERNEL);
-	} else {
-		if (start < kernel_x_start)
-			create_mapping(start, __phys_to_virt(start),
-				kernel_x_start - start,
-				PAGE_KERNEL);
-		create_mapping(kernel_x_start,
-				__phys_to_virt(kernel_x_start),
-				kernel_x_end - kernel_x_start,
-				PAGE_KERNEL_EXEC);
-		if (kernel_x_end < end)
-			create_mapping(kernel_x_end,
-				__phys_to_virt(kernel_x_end),
-				end - kernel_x_end,
-				PAGE_KERNEL);
+
+	/* No overlap with the kernel text */
+	if (end < kernel_start || start >= kernel_end) {
+		__create_pgd_mapping(pgd, start, __phys_to_virt(start),
+				     end - start, PAGE_KERNEL,
+				     early_pgtable_alloc);
+		return;
 	}
 
+	/*
+	 * This block overlaps the kernel text mapping.
+	 * Map the portion(s) which don't overlap.
+	 */
+	if (start < kernel_start)
+		__create_pgd_mapping(pgd, start,
+				     __phys_to_virt(start),
+				     kernel_start - start, PAGE_KERNEL,
+				     early_pgtable_alloc);
+	if (kernel_end < end)
+		__create_pgd_mapping(pgd, kernel_end,
+				     __phys_to_virt(kernel_end),
+				     end - kernel_end, PAGE_KERNEL,
+				     early_pgtable_alloc);
+
+	/*
+	 * Map the linear alias of the [_stext, _etext) interval as
+	 * read-only/non-executable. This makes the contents of the
+	 * region accessible to subsystems such as hibernate, but
+	 * protects it from inadvertent modification or execution.
+	 */
+	__create_pgd_mapping(pgd, kernel_start, __phys_to_virt(kernel_start),
+			     kernel_end - kernel_start, PAGE_KERNEL_RO,
+			     early_pgtable_alloc);
 }
-#else
-static void __init __map_memblock(phys_addr_t start, phys_addr_t end)
-{
-	create_mapping(start, __phys_to_virt(start), end - start,
-			PAGE_KERNEL_EXEC);
-}
-#endif
 
-static void __init map_mem(void)
+static void __init map_mem(pgd_t *pgd)
 {
 	struct memblock_region *reg;
-	phys_addr_t limit;
-
-	/*
-	 * Temporarily limit the memblock range. We need to do this as
-	 * create_mapping requires puds, pmds and ptes to be allocated from
-	 * memory addressable from the initial direct kernel mapping.
-	 *
-	 * The initial direct kernel mapping, located at swapper_pg_dir, gives
-	 * us PUD_SIZE (with SECTION maps) or PMD_SIZE (without SECTION maps,
-	 * memory starting from PHYS_OFFSET (which must be aligned to 2MB as
-	 * per Documentation/arm64/booting.txt).
-	 */
-	limit = PHYS_OFFSET + SWAPPER_INIT_MAP_SIZE;
-	memblock_set_current_limit(limit);
 
 	/* map all the memory banks */
 	for_each_memblock(memory, reg) {
@@ -421,70 +438,97 @@ static void __init map_mem(void)
 
 		if (start >= end)
 			break;
+		if (memblock_is_nomap(reg))
+			continue;
 
-		if (ARM64_SWAPPER_USES_SECTION_MAPS) {
-			/*
-			 * For the first memory bank align the start address and
-			 * current memblock limit to prevent create_mapping() from
-			 * allocating pte page tables from unmapped memory. With
-			 * the section maps, if the first block doesn't end on section
-			 * size boundary, create_mapping() will try to allocate a pte
-			 * page, which may be returned from an unmapped area.
-			 * When section maps are not used, the pte page table for the
-			 * current limit is already present in swapper_pg_dir.
-			 */
-			if (start < limit)
-				start = ALIGN(start, SECTION_SIZE);
-			if (end < limit) {
-				limit = end & SECTION_MASK;
-				memblock_set_current_limit(limit);
-			}
-		}
-		__map_memblock(start, end);
+		__map_memblock(pgd, start, end);
 	}
-
-	/* Limit no longer required. */
-	memblock_set_current_limit(MEMBLOCK_ALLOC_ANYWHERE);
 }
 
-void __init fixup_executable(void)
+void mark_rodata_ro(void)
 {
-#ifdef CONFIG_DEBUG_RODATA
-	/* now that we are actually fully mapped, make the start/end more fine grained */
-	if (!IS_ALIGNED((unsigned long)_stext, SECTION_SIZE)) {
-		unsigned long aligned_start = round_down(__pa(_stext),
-							SECTION_SIZE);
+	unsigned long section_size;
 
-		create_mapping(aligned_start, __phys_to_virt(aligned_start),
-				__pa(_stext) - aligned_start,
-				PAGE_KERNEL);
-	}
+	section_size = (unsigned long)__start_rodata - (unsigned long)_stext;
+	create_mapping_late(__pa(_stext), (unsigned long)_stext,
+			    section_size, PAGE_KERNEL_ROX);
+	/*
+	 * mark .rodata as read only. Use _etext rather than __end_rodata to
+	 * cover NOTES and EXCEPTION_TABLE.
+	 */
+	section_size = (unsigned long)_etext - (unsigned long)__start_rodata;
+	create_mapping_late(__pa(__start_rodata), (unsigned long)__start_rodata,
+			    section_size, PAGE_KERNEL_RO);
+}
 
-	if (!IS_ALIGNED((unsigned long)__init_end, SECTION_SIZE)) {
-		unsigned long aligned_end = round_up(__pa(__init_end),
-							SECTION_SIZE);
-		create_mapping(__pa(__init_end), (unsigned long)__init_end,
-				aligned_end - __pa(__init_end),
-				PAGE_KERNEL);
-	}
-#endif
+void fixup_init(void)
+{
+	/*
+	 * Unmap the __init region but leave the VM area in place. This
+	 * prevents the region from being reused for kernel modules, which
+	 * is not supported by kallsyms.
+	 */
+	unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin));
 }
 
-#ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void)
+static void __init map_kernel_chunk(pgd_t *pgd, void *va_start, void *va_end,
+				    pgprot_t prot, struct vm_struct *vma)
 {
-	create_mapping_late(__pa(_stext), (unsigned long)_stext,
-				(unsigned long)_etext - (unsigned long)_stext,
-				PAGE_KERNEL_EXEC | PTE_RDONLY);
+	phys_addr_t pa_start = __pa(va_start);
+	unsigned long size = va_end - va_start;
+
+	BUG_ON(!PAGE_ALIGNED(pa_start));
+	BUG_ON(!PAGE_ALIGNED(size));
+
+	__create_pgd_mapping(pgd, pa_start, (unsigned long)va_start, size, prot,
+			     early_pgtable_alloc);
+
+	vma->addr	= va_start;
+	vma->phys_addr	= pa_start;
+	vma->size	= size;
+	vma->flags	= VM_MAP;
+	vma->caller	= __builtin_return_address(0);
 
+	vm_area_add_early(vma);
 }
-#endif
 
-void fixup_init(void)
+/*
+ * Create fine-grained mappings for the kernel.
+ */
+static void __init map_kernel(pgd_t *pgd)
 {
-	create_mapping_late(__pa(__init_begin), (unsigned long)__init_begin,
-			(unsigned long)__init_end - (unsigned long)__init_begin,
-			PAGE_KERNEL);
+	static struct vm_struct vmlinux_text, vmlinux_rodata, vmlinux_init, vmlinux_data;
+
+	map_kernel_chunk(pgd, _stext, __start_rodata, PAGE_KERNEL_EXEC, &vmlinux_text);
+	map_kernel_chunk(pgd, __start_rodata, _etext, PAGE_KERNEL, &vmlinux_rodata);
+	map_kernel_chunk(pgd, __init_begin, __init_end, PAGE_KERNEL_EXEC,
+			 &vmlinux_init);
+	map_kernel_chunk(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data);
+
+	if (!pgd_val(*pgd_offset_raw(pgd, FIXADDR_START))) {
+		/*
+		 * The fixmap falls in a separate pgd to the kernel, and doesn't
+		 * live in the carveout for the swapper_pg_dir. We can simply
+		 * re-use the existing dir for the fixmap.
+		 */
+		set_pgd(pgd_offset_raw(pgd, FIXADDR_START),
+			*pgd_offset_k(FIXADDR_START));
+	} else if (CONFIG_PGTABLE_LEVELS > 3) {
+		/*
+		 * The fixmap shares its top level pgd entry with the kernel
+		 * mapping. This can really only occur when we are running
+		 * with 16k/4 levels, so we can simply reuse the pud level
+		 * entry instead.
+		 */
+		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
+		set_pud(pud_set_fixmap_offset(pgd, FIXADDR_START),
+			__pud(__pa(bm_pmd) | PUD_TYPE_TABLE));
+		pud_clear_fixmap();
+	} else {
+		BUG();
+	}
+
+	kasan_copy_shadow(pgd);
 }
 
 /*
@@ -493,25 +537,35 @@ void fixup_init(void)
  */
 void __init paging_init(void)
 {
-	void *zero_page;
-
-	map_mem();
-	fixup_executable();
+	phys_addr_t pgd_phys = early_pgtable_alloc();
+	pgd_t *pgd = pgd_set_fixmap(pgd_phys);
 
-	/* allocate the zero page. */
-	zero_page = early_alloc(PAGE_SIZE);
+	map_kernel(pgd);
+	map_mem(pgd);
 
-	bootmem_init();
+	/*
+	 * We want to reuse the original swapper_pg_dir so we don't have to
+	 * communicate the new address to non-coherent secondaries in
+	 * secondary_entry, and so cpu_switch_mm can generate the address with
+	 * adrp+add rather than a load from some global variable.
+	 *
+	 * To do this we need to go via a temporary pgd.
+	 */
+	cpu_replace_ttbr1(__va(pgd_phys));
+	memcpy(swapper_pg_dir, pgd, PAGE_SIZE);
+	cpu_replace_ttbr1(swapper_pg_dir);
 
-	empty_zero_page = virt_to_page(zero_page);
+	pgd_clear_fixmap();
+	memblock_free(pgd_phys, PAGE_SIZE);
 
 	/*
-	 * TTBR0 is only used for the identity mapping at this stage. Make it
-	 * point to zero page to avoid speculatively fetching new entries.
+	 * We only reuse the PGD from the swapper_pg_dir, not the pud + pmd
+	 * allocated with it.
 	 */
-	cpu_set_reserved_ttbr0();
-	local_flush_tlb_all();
-	cpu_set_default_tcr_t0sz();
+	memblock_free(__pa(swapper_pg_dir) + PAGE_SIZE,
+		      SWAPPER_DIR_SIZE - PAGE_SIZE);
+
+	bootmem_init();
 }
 
 /*
@@ -598,21 +652,13 @@ void vmemmap_free(unsigned long start, unsigned long end)
 }
 #endif	/* CONFIG_SPARSEMEM_VMEMMAP */
 
-static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
-#if CONFIG_PGTABLE_LEVELS > 2
-static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss;
-#endif
-#if CONFIG_PGTABLE_LEVELS > 3
-static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss;
-#endif
-
 static inline pud_t * fixmap_pud(unsigned long addr)
 {
 	pgd_t *pgd = pgd_offset_k(addr);
 
 	BUG_ON(pgd_none(*pgd) || pgd_bad(*pgd));
 
-	return pud_offset(pgd, addr);
+	return pud_offset_kimg(pgd, addr);
 }
 
 static inline pmd_t * fixmap_pmd(unsigned long addr)
@@ -621,16 +667,12 @@ static inline pmd_t * fixmap_pmd(unsigned long addr)
 
 	BUG_ON(pud_none(*pud) || pud_bad(*pud));
 
-	return pmd_offset(pud, addr);
+	return pmd_offset_kimg(pud, addr);
 }
 
 static inline pte_t * fixmap_pte(unsigned long addr)
 {
-	pmd_t *pmd = fixmap_pmd(addr);
-
-	BUG_ON(pmd_none(*pmd) || pmd_bad(*pmd));
-
-	return pte_offset_kernel(pmd, addr);
+	return &bm_pte[pte_index(addr)];
 }
 
 void __init early_fixmap_init(void)
@@ -641,15 +683,26 @@ void __init early_fixmap_init(void)
 	unsigned long addr = FIXADDR_START;
 
 	pgd = pgd_offset_k(addr);
-	pgd_populate(&init_mm, pgd, bm_pud);
-	pud = pud_offset(pgd, addr);
+	if (CONFIG_PGTABLE_LEVELS > 3 &&
+	    !(pgd_none(*pgd) || pgd_page_paddr(*pgd) == __pa(bm_pud))) {
+		/*
+		 * We only end up here if the kernel mapping and the fixmap
+		 * share the top level pgd entry, which should only happen on
+		 * 16k/4 levels configurations.
+		 */
+		BUG_ON(!IS_ENABLED(CONFIG_ARM64_16K_PAGES));
+		pud = pud_offset_kimg(pgd, addr);
+	} else {
+		pgd_populate(&init_mm, pgd, bm_pud);
+		pud = fixmap_pud(addr);
+	}
 	pud_populate(&init_mm, pud, bm_pmd);
-	pmd = pmd_offset(pud, addr);
+	pmd = fixmap_pmd(addr);
 	pmd_populate_kernel(&init_mm, pmd, bm_pte);
 
 	/*
 	 * The boot-ioremap range spans multiple pmds, for which
-	 * we are not preparted:
+	 * we are not prepared:
 	 */
 	BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT)
 		     != (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT));
@@ -688,11 +741,10 @@ void __set_fixmap(enum fixed_addresses idx,
 	}
 }
 
-void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
+void *__init __fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot)
 {
 	const u64 dt_virt_base = __fix_to_virt(FIX_FDT);
-	pgprot_t prot = PAGE_KERNEL | PTE_RDONLY;
-	int size, offset;
+	int offset;
 	void *dt_virt;
 
 	/*
@@ -709,7 +761,7 @@ void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
 	/*
 	 * Make sure that the FDT region can be mapped without the need to
 	 * allocate additional translation table pages, so that it is safe
-	 * to call create_mapping() this early.
+	 * to call create_mapping_noalloc() this early.
 	 *
 	 * On 64k pages, the FDT will be mapped using PTEs, so we need to
 	 * be in the same PMD as the rest of the fixmap.
@@ -725,21 +777,73 @@ void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
 	dt_virt = (void *)dt_virt_base + offset;
 
 	/* map the first chunk so we can read the size from the header */
-	create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
-		       SWAPPER_BLOCK_SIZE, prot);
+	create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE),
+			dt_virt_base, SWAPPER_BLOCK_SIZE, prot);
 
 	if (fdt_check_header(dt_virt) != 0)
 		return NULL;
 
-	size = fdt_totalsize(dt_virt);
-	if (size > MAX_FDT_SIZE)
+	*size = fdt_totalsize(dt_virt);
+	if (*size > MAX_FDT_SIZE)
 		return NULL;
 
-	if (offset + size > SWAPPER_BLOCK_SIZE)
-		create_mapping(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
-			       round_up(offset + size, SWAPPER_BLOCK_SIZE), prot);
+	if (offset + *size > SWAPPER_BLOCK_SIZE)
+		create_mapping_noalloc(round_down(dt_phys, SWAPPER_BLOCK_SIZE), dt_virt_base,
+			       round_up(offset + *size, SWAPPER_BLOCK_SIZE), prot);
 
-	memblock_reserve(dt_phys, size);
+	return dt_virt;
+}
+
+void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
+{
+	void *dt_virt;
+	int size;
+
+	dt_virt = __fixmap_remap_fdt(dt_phys, &size, PAGE_KERNEL_RO);
+	if (!dt_virt)
+		return NULL;
 
+	memblock_reserve(dt_phys, size);
 	return dt_virt;
 }
+
+int __init arch_ioremap_pud_supported(void)
+{
+	/* only 4k granule supports level 1 block mappings */
+	return IS_ENABLED(CONFIG_ARM64_4K_PAGES);
+}
+
+int __init arch_ioremap_pmd_supported(void)
+{
+	return 1;
+}
+
+int pud_set_huge(pud_t *pud, phys_addr_t phys, pgprot_t prot)
+{
+	BUG_ON(phys & ~PUD_MASK);
+	set_pud(pud, __pud(phys | PUD_TYPE_SECT | pgprot_val(mk_sect_prot(prot))));
+	return 1;
+}
+
+int pmd_set_huge(pmd_t *pmd, phys_addr_t phys, pgprot_t prot)
+{
+	BUG_ON(phys & ~PMD_MASK);
+	set_pmd(pmd, __pmd(phys | PMD_TYPE_SECT | pgprot_val(mk_sect_prot(prot))));
+	return 1;
+}
+
+int pud_clear_huge(pud_t *pud)
+{
+	if (!pud_sect(*pud))
+		return 0;
+	pud_clear(pud);
+	return 1;
+}
+
+int pmd_clear_huge(pmd_t *pmd)
+{
+	if (!pmd_sect(*pmd))
+		return 0;
+	pmd_clear(pmd);
+	return 1;
+}
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 3571c7309c5e..ca6d268e3313 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
@@ -36,14 +37,32 @@ static int change_page_range(pte_t *ptep, pgtable_t token, unsigned long addr,
 	return 0;
 }
 
+/*
+ * This function assumes that the range is mapped with PAGE_SIZE pages.
+ */
+static int __change_memory_common(unsigned long start, unsigned long size,
+				pgprot_t set_mask, pgprot_t clear_mask)
+{
+	struct page_change_data data;
+	int ret;
+
+	data.set_mask = set_mask;
+	data.clear_mask = clear_mask;
+
+	ret = apply_to_page_range(&init_mm, start, size, change_page_range,
+					&data);
+
+	flush_tlb_kernel_range(start, start + size);
+	return ret;
+}
+
 static int change_memory_common(unsigned long addr, int numpages,
 				pgprot_t set_mask, pgprot_t clear_mask)
 {
 	unsigned long start = addr;
 	unsigned long size = PAGE_SIZE*numpages;
 	unsigned long end = start + size;
-	int ret;
-	struct page_change_data data;
+	struct vm_struct *area;
 
 	if (!PAGE_ALIGNED(addr)) {
 		start &= PAGE_MASK;
@@ -51,20 +70,29 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}
 
-	if (start < MODULES_VADDR || start >= MODULES_END)
-		return -EINVAL;
-
-	if (end < MODULES_VADDR || end >= MODULES_END)
+	/*
+	 * Kernel VA mappings are always live, and splitting live section
+	 * mappings into page mappings may cause TLB conflicts. This means
+	 * we have to ensure that changing the permission bits of the range
+	 * we are operating on does not result in such splitting.
+	 *
+	 * Let's restrict ourselves to mappings created by vmalloc (or vmap).
+	 * Those are guaranteed to consist entirely of page mappings, and
+	 * splitting is never needed.
+	 *
+	 * So check whether the [addr, addr + size) interval is entirely
+	 * covered by precisely one VM area that has the VM_ALLOC flag set.
+	 */
+	area = find_vm_area((void *)addr);
+	if (!area ||
+	    end > (unsigned long)area->addr + area->size ||
+	    !(area->flags & VM_ALLOC))
 		return -EINVAL;
 
-	data.set_mask = set_mask;
-	data.clear_mask = clear_mask;
-
-	ret = apply_to_page_range(&init_mm, start, size, change_page_range,
-					&data);
+	if (!numpages)
+		return 0;
 
-	flush_tlb_kernel_range(start, end);
-	return ret;
+	return __change_memory_common(start, size, set_mask, clear_mask);
 }
 
 int set_memory_ro(unsigned long addr, int numpages)
@@ -96,3 +124,19 @@ int set_memory_x(unsigned long addr, int numpages)
 					__pgprot(PTE_PXN));
 }
 EXPORT_SYMBOL_GPL(set_memory_x);
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+void __kernel_map_pages(struct page *page, int numpages, int enable)
+{
+	unsigned long addr = (unsigned long) page_address(page);
+
+	if (enable)
+		__change_memory_common(addr, PAGE_SIZE * numpages,
+					__pgprot(PTE_VALID),
+					__pgprot(0));
+	else
+		__change_memory_common(addr, PAGE_SIZE * numpages,
+					__pgprot(0),
+					__pgprot(PTE_VALID));
+}
+#endif
diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c
index cb3ba1b812e7..ae11d4e03d0e 100644
--- a/arch/arm64/mm/pgd.c
+++ b/arch/arm64/mm/pgd.c
@@ -46,14 +46,14 @@ void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 		kmem_cache_free(pgd_cache, pgd);
 }
 
-static int __init pgd_cache_init(void)
+void __init pgd_cache_init(void)
 {
+	if (PGD_SIZE == PAGE_SIZE)
+		return;
+
 	/*
 	 * Naturally aligned pgds required by the architecture.
 	 */
-	if (PGD_SIZE != PAGE_SIZE)
-		pgd_cache = kmem_cache_create("pgd_cache", PGD_SIZE, PGD_SIZE,
-					      SLAB_PANIC, NULL);
-	return 0;
+	pgd_cache = kmem_cache_create("pgd_cache", PGD_SIZE, PGD_SIZE,
+				      SLAB_PANIC, NULL);
 }
-core_initcall(pgd_cache_init);
diff --git a/arch/arm64/mm/proc-macros.S b/arch/arm64/mm/proc-macros.S
index 4c4d93c4bf65..e6a30e1268a8 100644
--- a/arch/arm64/mm/proc-macros.S
+++ b/arch/arm64/mm/proc-macros.S
@@ -62,3 +62,37 @@
 	bfi	\valreg, \tmpreg, #TCR_T0SZ_OFFSET, #TCR_TxSZ_WIDTH
 #endif
 	.endm
+
+/*
+ * Macro to perform a data cache maintenance for the interval
+ * [kaddr, kaddr + size)
+ *
+ * 	op:		operation passed to dc instruction
+ * 	domain:		domain used in dsb instruciton
+ * 	kaddr:		starting virtual address of the region
+ * 	size:		size of the region
+ * 	Corrupts: 	kaddr, size, tmp1, tmp2
+ */
+	.macro dcache_by_line_op op, domain, kaddr, size, tmp1, tmp2
+	dcache_line_size \tmp1, \tmp2
+	add	\size, \kaddr, \size
+	sub	\tmp2, \tmp1, #1
+	bic	\kaddr, \kaddr, \tmp2
+9998:	dc	\op, \kaddr
+	add	\kaddr, \kaddr, \tmp1
+	cmp	\kaddr, \size
+	b.lo	9998b
+	dsb	\domain
+	.endm
+
+/*
+ * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
+ */
+	.macro	reset_pmuserenr_el0, tmpreg
+	mrs	\tmpreg, id_aa64dfr0_el1	// Check ID_AA64DFR0_EL1 PMUVer
+	sbfx	\tmpreg, \tmpreg, #8, #4
+	cmp	\tmpreg, #1			// Skip if no PMU present
+	b.lt	9000f
+	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+9000:
+	.endm
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index cacecc4ad3e5..543f5198005a 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -25,6 +25,8 @@
 #include <asm/hwcap.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative.h>
 
 #include "proc-macros.S"
 
@@ -117,6 +119,7 @@ ENTRY(cpu_do_resume)
 	 */
 	ubfx	x11, x11, #1, #1
 	msr	oslar_el1, x11
+	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
 	mov	x0, x12
 	dsb	nsh		// Make sure local tlb invalidation completed
 	isb
@@ -136,10 +139,46 @@ ENTRY(cpu_do_switch_mm)
 	bfi	x0, x1, #48, #16		// set the ASID
 	msr	ttbr0_el1, x0			// set TTBR0
 	isb
+alternative_if_not ARM64_WORKAROUND_CAVIUM_27456
 	ret
+	nop
+	nop
+	nop
+alternative_else
+	ic	iallu
+	dsb	nsh
+	isb
+	ret
+alternative_endif
 ENDPROC(cpu_do_switch_mm)
 
-	.section ".text.init", #alloc, #execinstr
+	.pushsection ".idmap.text", "ax"
+/*
+ * void idmap_cpu_replace_ttbr1(phys_addr_t new_pgd)
+ *
+ * This is the low-level counterpart to cpu_replace_ttbr1, and should not be
+ * called by anything else. It can only be executed from a TTBR0 mapping.
+ */
+ENTRY(idmap_cpu_replace_ttbr1)
+	mrs	x2, daif
+	msr	daifset, #0xf
+
+	adrp	x1, empty_zero_page
+	msr	ttbr1_el1, x1
+	isb
+
+	tlbi	vmalle1
+	dsb	nsh
+	isb
+
+	msr	ttbr1_el1, x0
+	isb
+
+	msr	daif, x2
+
+	ret
+ENDPROC(idmap_cpu_replace_ttbr1)
+	.popsection
 
 /*
  *	__cpu_setup
@@ -155,6 +194,7 @@ ENTRY(__cpu_setup)
 	msr	cpacr_el1, x0			// Enable FP/ASIMD
 	mov	x0, #1 << 12			// Reset mdscr_el1 and disable
 	msr	mdscr_el1, x0			// access to the DCC from EL0
+	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
 	/*
 	 * Memory region attributes for LPAE:
 	 *
diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h
index 98a26ce82d26..aee5637ea436 100644
--- a/arch/arm64/net/bpf_jit.h
+++ b/arch/arm64/net/bpf_jit.h
@@ -1,7 +1,7 @@
 /*
  * BPF JIT compiler for ARM64
  *
- * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com>
+ * Copyright (C) 2014-2015 Zi Shen Lim <zlim.lnx@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -35,6 +35,7 @@
 	aarch64_insn_gen_comp_branch_imm(0, offset, Rt, A64_VARIANT(sf), \
 		AARCH64_INSN_BRANCH_COMP_##type)
 #define A64_CBZ(sf, Rt, imm19) A64_COMP_BRANCH(sf, Rt, (imm19) << 2, ZERO)
+#define A64_CBNZ(sf, Rt, imm19) A64_COMP_BRANCH(sf, Rt, (imm19) << 2, NONZERO)
 
 /* Conditional branch (immediate) */
 #define A64_COND_BRANCH(cond, offset) \
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index a44e5293c6f5..a34420a5df9a 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1,7 +1,7 @@
 /*
  * BPF JIT compiler for ARM64
  *
- * Copyright (C) 2014 Zi Shen Lim <zlim.lnx@gmail.com>
+ * Copyright (C) 2014-2016 Zi Shen Lim <zlim.lnx@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -50,7 +50,7 @@ static const int bpf2a64[] = {
 	[BPF_REG_8] = A64_R(21),
 	[BPF_REG_9] = A64_R(22),
 	/* read-only frame pointer to access stack */
-	[BPF_REG_FP] = A64_FP,
+	[BPF_REG_FP] = A64_R(25),
 	/* temporary register for internal BPF JIT */
 	[TMP_REG_1] = A64_R(23),
 	[TMP_REG_2] = A64_R(24),
@@ -139,6 +139,12 @@ static inline int epilogue_offset(const struct jit_ctx *ctx)
 /* Stack must be multiples of 16B */
 #define STACK_ALIGN(sz) (((sz) + 15) & ~15)
 
+#define _STACK_SIZE \
+	(MAX_BPF_STACK \
+	 + 4 /* extra for skb_copy_bits buffer */)
+
+#define STACK_SIZE STACK_ALIGN(_STACK_SIZE)
+
 static void build_prologue(struct jit_ctx *ctx)
 {
 	const u8 r6 = bpf2a64[BPF_REG_6];
@@ -146,14 +152,37 @@ static void build_prologue(struct jit_ctx *ctx)
 	const u8 r8 = bpf2a64[BPF_REG_8];
 	const u8 r9 = bpf2a64[BPF_REG_9];
 	const u8 fp = bpf2a64[BPF_REG_FP];
-	const u8 ra = bpf2a64[BPF_REG_A];
-	const u8 rx = bpf2a64[BPF_REG_X];
 	const u8 tmp1 = bpf2a64[TMP_REG_1];
 	const u8 tmp2 = bpf2a64[TMP_REG_2];
-	int stack_size = MAX_BPF_STACK;
 
-	stack_size += 4; /* extra for skb_copy_bits buffer */
-	stack_size = STACK_ALIGN(stack_size);
+	/*
+	 * BPF prog stack layout
+	 *
+	 *                         high
+	 * original A64_SP =>   0:+-----+ BPF prologue
+	 *                        |FP/LR|
+	 * current A64_FP =>  -16:+-----+
+	 *                        | ... | callee saved registers
+	 *                        +-----+
+	 *                        |     | x25/x26
+	 * BPF fp register => -80:+-----+ <= (BPF_FP)
+	 *                        |     |
+	 *                        | ... | BPF prog stack
+	 *                        |     |
+	 *                        +-----+ <= (BPF_FP - MAX_BPF_STACK)
+	 *                        |RSVD | JIT scratchpad
+	 * current A64_SP =>      +-----+ <= (BPF_FP - STACK_SIZE)
+	 *                        |     |
+	 *                        | ... | Function call stack
+	 *                        |     |
+	 *                        +-----+
+	 *                          low
+	 *
+	 */
+
+	/* Save FP and LR registers to stay align with ARM64 AAPCS */
+	emit(A64_PUSH(A64_FP, A64_LR, A64_SP), ctx);
+	emit(A64_MOV(1, A64_FP, A64_SP), ctx);
 
 	/* Save callee-saved register */
 	emit(A64_PUSH(r6, r7, A64_SP), ctx);
@@ -161,15 +190,14 @@ static void build_prologue(struct jit_ctx *ctx)
 	if (ctx->tmp_used)
 		emit(A64_PUSH(tmp1, tmp2, A64_SP), ctx);
 
-	/* Set up BPF stack */
-	emit(A64_SUB_I(1, A64_SP, A64_SP, stack_size), ctx);
+	/* Save fp (x25) and x26. SP requires 16 bytes alignment */
+	emit(A64_PUSH(fp, A64_R(26), A64_SP), ctx);
 
-	/* Set up frame pointer */
+	/* Set up BPF prog stack base register (x25) */
 	emit(A64_MOV(1, fp, A64_SP), ctx);
 
-	/* Clear registers A and X */
-	emit_a64_mov_i64(ra, 0, ctx);
-	emit_a64_mov_i64(rx, 0, ctx);
+	/* Set up function call stack */
+	emit(A64_SUB_I(1, A64_SP, A64_SP, STACK_SIZE), ctx);
 }
 
 static void build_epilogue(struct jit_ctx *ctx)
@@ -182,13 +210,12 @@ static void build_epilogue(struct jit_ctx *ctx)
 	const u8 fp = bpf2a64[BPF_REG_FP];
 	const u8 tmp1 = bpf2a64[TMP_REG_1];
 	const u8 tmp2 = bpf2a64[TMP_REG_2];
-	int stack_size = MAX_BPF_STACK;
-
-	stack_size += 4; /* extra for skb_copy_bits buffer */
-	stack_size = STACK_ALIGN(stack_size);
 
 	/* We're done with BPF stack */
-	emit(A64_ADD_I(1, A64_SP, A64_SP, stack_size), ctx);
+	emit(A64_ADD_I(1, A64_SP, A64_SP, STACK_SIZE), ctx);
+
+	/* Restore fs (x25) and x26 */
+	emit(A64_POP(fp, A64_R(26), A64_SP), ctx);
 
 	/* Restore callee-saved register */
 	if (ctx->tmp_used)
@@ -196,8 +223,8 @@ static void build_epilogue(struct jit_ctx *ctx)
 	emit(A64_POP(r8, r9, A64_SP), ctx);
 	emit(A64_POP(r6, r7, A64_SP), ctx);
 
-	/* Restore frame pointer */
-	emit(A64_MOV(1, fp, A64_SP), ctx);
+	/* Restore FP/LR registers */
+	emit(A64_POP(A64_FP, A64_LR, A64_SP), ctx);
 
 	/* Set return value */
 	emit(A64_MOV(1, A64_R(0), r0), ctx);
@@ -225,6 +252,17 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 	u8 jmp_cond;
 	s32 jmp_offset;
 
+#define check_imm(bits, imm) do {				\
+	if ((((imm) > 0) && ((imm) >> (bits))) ||		\
+	    (((imm) < 0) && (~(imm) >> (bits)))) {		\
+		pr_info("[%2d] imm=%d(0x%x) out of range\n",	\
+			i, imm, imm);				\
+		return -EINVAL;					\
+	}							\
+} while (0)
+#define check_imm19(imm) check_imm(19, imm)
+#define check_imm26(imm) check_imm(26, imm)
+
 	switch (code) {
 	/* dst = src */
 	case BPF_ALU | BPF_MOV | BPF_X:
@@ -258,15 +296,33 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		break;
 	case BPF_ALU | BPF_DIV | BPF_X:
 	case BPF_ALU64 | BPF_DIV | BPF_X:
-		emit(A64_UDIV(is64, dst, dst, src), ctx);
-		break;
 	case BPF_ALU | BPF_MOD | BPF_X:
 	case BPF_ALU64 | BPF_MOD | BPF_X:
-		ctx->tmp_used = 1;
-		emit(A64_UDIV(is64, tmp, dst, src), ctx);
-		emit(A64_MUL(is64, tmp, tmp, src), ctx);
-		emit(A64_SUB(is64, dst, dst, tmp), ctx);
+	{
+		const u8 r0 = bpf2a64[BPF_REG_0];
+
+		/* if (src == 0) return 0 */
+		jmp_offset = 3; /* skip ahead to else path */
+		check_imm19(jmp_offset);
+		emit(A64_CBNZ(is64, src, jmp_offset), ctx);
+		emit(A64_MOVZ(1, r0, 0, 0), ctx);
+		jmp_offset = epilogue_offset(ctx);
+		check_imm26(jmp_offset);
+		emit(A64_B(jmp_offset), ctx);
+		/* else */
+		switch (BPF_OP(code)) {
+		case BPF_DIV:
+			emit(A64_UDIV(is64, dst, dst, src), ctx);
+			break;
+		case BPF_MOD:
+			ctx->tmp_used = 1;
+			emit(A64_UDIV(is64, tmp, dst, src), ctx);
+			emit(A64_MUL(is64, tmp, tmp, src), ctx);
+			emit(A64_SUB(is64, dst, dst, tmp), ctx);
+			break;
+		}
 		break;
+	}
 	case BPF_ALU | BPF_LSH | BPF_X:
 	case BPF_ALU64 | BPF_LSH | BPF_X:
 		emit(A64_LSLV(is64, dst, dst, src), ctx);
@@ -393,17 +449,6 @@ emit_bswap_uxt:
 		emit(A64_ASR(is64, dst, dst, imm), ctx);
 		break;
 
-#define check_imm(bits, imm) do {				\
-	if ((((imm) > 0) && ((imm) >> (bits))) ||		\
-	    (((imm) < 0) && (~(imm) >> (bits)))) {		\
-		pr_info("[%2d] imm=%d(0x%x) out of range\n",	\
-			i, imm, imm);				\
-		return -EINVAL;					\
-	}							\
-} while (0)
-#define check_imm19(imm) check_imm(19, imm)
-#define check_imm26(imm) check_imm(26, imm)
-
 	/* JUMP off */
 	case BPF_JMP | BPF_JA:
 		jmp_offset = bpf2a64_offset(i + off, i, ctx);
@@ -539,7 +584,25 @@ emit_cond_jmp:
 	case BPF_ST | BPF_MEM | BPF_H:
 	case BPF_ST | BPF_MEM | BPF_B:
 	case BPF_ST | BPF_MEM | BPF_DW:
-		goto notyet;
+		/* Load imm to a register then store it */
+		ctx->tmp_used = 1;
+		emit_a64_mov_i(1, tmp2, off, ctx);
+		emit_a64_mov_i(1, tmp, imm, ctx);
+		switch (BPF_SIZE(code)) {
+		case BPF_W:
+			emit(A64_STR32(tmp, dst, tmp2), ctx);
+			break;
+		case BPF_H:
+			emit(A64_STRH(tmp, dst, tmp2), ctx);
+			break;
+		case BPF_B:
+			emit(A64_STRB(tmp, dst, tmp2), ctx);
+			break;
+		case BPF_DW:
+			emit(A64_STR64(tmp, dst, tmp2), ctx);
+			break;
+		}
+		break;
 
 	/* STX: *(size *)(dst + off) = src */
 	case BPF_STX | BPF_MEM | BPF_W:
@@ -606,7 +669,7 @@ emit_cond_jmp:
 			return -EINVAL;
 		}
 		emit_a64_mov_i64(r3, size, ctx);
-		emit(A64_ADD_I(1, r4, fp, MAX_BPF_STACK), ctx);
+		emit(A64_SUB_I(1, r4, fp, STACK_SIZE), ctx);
 		emit_a64_mov_i64(r5, (unsigned long)bpf_load_pointer, ctx);
 		emit(A64_PUSH(A64_FP, A64_LR, A64_SP), ctx);
 		emit(A64_MOV(1, A64_FP, A64_SP), ctx);
@@ -674,6 +737,20 @@ static int build_body(struct jit_ctx *ctx)
 	return 0;
 }
 
+static int validate_code(struct jit_ctx *ctx)
+{
+	int i;
+
+	for (i = 0; i < ctx->idx; i++) {
+		u32 a64_insn = le32_to_cpu(ctx->image[i]);
+
+		if (a64_insn == AARCH64_BREAK_FAULT)
+			return -1;
+	}
+
+	return 0;
+}
+
 static inline void bpf_flush_icache(void *start, void *end)
 {
 	flush_icache_range((unsigned long)start, (unsigned long)end);
@@ -736,11 +813,17 @@ void bpf_int_jit_compile(struct bpf_prog *prog)
 
 	build_epilogue(&ctx);
 
+	/* 3. Extra pass to validate JITed code. */
+	if (validate_code(&ctx)) {
+		bpf_jit_binary_free(header);
+		goto out;
+	}
+
 	/* And we're done. */
 	if (bpf_jit_enable > 1)
 		bpf_jit_dump(prog->len, image_size, 2, ctx.image);
 
-	bpf_flush_icache(ctx.image, ctx.image + ctx.idx);
+	bpf_flush_icache(header, ctx.image + ctx.idx);
 
 	set_memory_ro((unsigned long)header, header->pages);
 	prog->bpf_func = (void *)ctx.image;
diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S
index 8bbe9401f4f0..70df80e8da2c 100644
--- a/arch/arm64/xen/hypercall.S
+++ b/arch/arm64/xen/hypercall.S
@@ -80,6 +80,7 @@ HYPERCALL2(memory_op);
 HYPERCALL2(physdev_op);
 HYPERCALL3(vcpu_op);
 HYPERCALL1(tmem_op);
+HYPERCALL1(platform_op_raw);
 HYPERCALL2(multicall);
 
 ENTRY(privcmd_call)
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index 83d896cc2aed..718a6d7eb808 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -27,7 +27,6 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/gpio.h>
 
 #include <mach/at32ap700x.h>
 #include <mach/board.h>
diff --git a/arch/avr32/include/asm/checksum.h b/arch/avr32/include/asm/checksum.h
index 4ddbfd2486af..4ab7d5bdaf53 100644
--- a/arch/avr32/include/asm/checksum.h
+++ b/arch/avr32/include/asm/checksum.h
@@ -111,9 +111,8 @@ static inline __sum16 csum_fold(__wsum sum)
 }
 
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					       unsigned short len,
-					       unsigned short proto,
-					       __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	asm("	add	%0, %1\n"
 	    "	adc	%0, %0, %2\n"
@@ -132,9 +131,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
diff --git a/arch/avr32/include/asm/cmpxchg.h b/arch/avr32/include/asm/cmpxchg.h
index 366bbeaeb405..572739b4c4b4 100644
--- a/arch/avr32/include/asm/cmpxchg.h
+++ b/arch/avr32/include/asm/cmpxchg.h
@@ -57,7 +57,7 @@ static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
 		"	brne	1b\n"
 		"2:\n"
 		: [ret] "=&r"(ret), [m] "=m"(*m)
-		: "m"(m), [old] "ir"(old), [new] "r"(new)
+		: "m"(m), [old] "Ks21r"(old), [new] "r"(new)
 		: "memory", "cc");
 	return ret;
 }
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
index ae7ac9205d20..1115f2a645d1 100644
--- a/arch/avr32/include/asm/dma-mapping.h
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -1,350 +1,14 @@
 #ifndef __ASM_AVR32_DMA_MAPPING_H
 #define __ASM_AVR32_DMA_MAPPING_H
 
-#include <linux/mm.h>
-#include <linux/device.h>
-#include <linux/scatterlist.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
-
 extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	int direction);
 
-/*
- * Return whether the given device DMA address mask can be supported
- * properly.  For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- */
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	/* Fix when needed. I really don't know of any limitations */
-	return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-	return 0;
-}
+extern struct dma_map_ops avr32_dma_ops;
 
-/*
- * dma_map_single can't fail as it is implemented now.
- */
-static inline int dma_mapping_error(struct device *dev, dma_addr_t addr)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	return 0;
+	return &avr32_dma_ops;
 }
 
-/**
- * dma_alloc_coherent - allocate consistent memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, unbuffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_coherent
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_coherent
- * @cpu_addr: CPU-view address returned from dma_alloc_coherent
- * @handle: device-view address returned from dma_alloc_coherent
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_coherent().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void dma_free_coherent(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t handle);
-
-/**
- * dma_alloc_writecombine - allocate write-combining memory for DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: required memory size
- * @handle: bus-specific DMA address
- *
- * Allocate some uncached, buffered memory for a device for
- * performing DMA.  This function allocates pages, and will
- * return the CPU-viewed address, and sets @handle to be the
- * device-viewed address.
- */
-extern void *dma_alloc_writecombine(struct device *dev, size_t size,
-				    dma_addr_t *handle, gfp_t gfp);
-
-/**
- * dma_free_coherent - free memory allocated by dma_alloc_writecombine
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @size: size of memory originally requested in dma_alloc_writecombine
- * @cpu_addr: CPU-view address returned from dma_alloc_writecombine
- * @handle: device-view address returned from dma_alloc_writecombine
- *
- * Free (and unmap) a DMA buffer previously allocated by
- * dma_alloc_writecombine().
- *
- * References to memory and mappings associated with cpu_addr/handle
- * during and after this call executing are illegal.
- */
-extern void dma_free_writecombine(struct device *dev, size_t size,
-				  void *cpu_addr, dma_addr_t handle);
-
-/**
- * dma_map_single - map a single buffer for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @cpu_addr: CPU direct mapped address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_single() or dma_sync_single().
- */
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *cpu_addr, size_t size,
-	       enum dma_data_direction direction)
-{
-	dma_cache_sync(dev, cpu_addr, size, direction);
-	return virt_to_bus(cpu_addr);
-}
-
-/**
- * dma_unmap_single - unmap a single buffer previously mapped
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		 enum dma_data_direction direction)
-{
-
-}
-
-/**
- * dma_map_page - map a portion of a page for streaming DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @page: page that buffer resides in
- * @offset: offset into page for start of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Ensure that any data held in the cache is appropriately discarded
- * or written back.
- *
- * The device owns this memory once this call has completed.  The CPU
- * can regain ownership by calling dma_unmap_page() or dma_sync_single().
- */
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction direction)
-{
-	return dma_map_single(dev, page_address(page) + offset,
-			      size, direction);
-}
-
-/**
- * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Unmap a single streaming mode DMA translation.  The handle and size
- * must match what was provided in the previous dma_map_single() call.
- * All other usages are undefined.
- *
- * After this call, reads by the CPU to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	       enum dma_data_direction direction)
-{
-	dma_unmap_single(dev, dma_address, size, direction);
-}
-
-/**
- * dma_map_sg - map a set of SG buffers for streaming mode DMA
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scatter-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
-	   enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nents, i) {
-		char *virt;
-
-		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
-		virt = sg_virt(sg);
-		dma_cache_sync(dev, virt, sg->length, direction);
-	}
-
-	return nents;
-}
-
-/**
- * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Unmap a set of streaming mode DMA translations.
- * Again, CPU read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	     enum dma_data_direction direction)
-{
-
-}
-
-/**
- * dma_sync_single_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a single streaming mode DMA
- * translation after a transfer.
- *
- * If you perform a dma_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the DMA mapping,
- * you must call this function before doing so.  At the next point you
- * give the DMA address back to the card, you must first perform a
- * dma_sync_single_for_device, and then the device again owns the
- * buffer.
- */
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			size_t size, enum dma_data_direction direction)
-{
-	/*
-	 * No need to do anything since the CPU isn't supposed to
-	 * touch this memory after we flushed it at mapping- or
-	 * sync-for-device time.
-	 */
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-			   size_t size, enum dma_data_direction direction)
-{
-	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction direction)
-{
-	/* just sync everything, that's all the pci API can do */
-	dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
-{
-	/* just sync everything, that's all the pci API can do */
-	dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
-}
-
-/**
- * dma_sync_sg_for_cpu
- * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
- * @sg: list of buffers
- * @nents: number of buffers to map
- * @dir: DMA transfer direction
- *
- * Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as dma_sync_single_for_* but for a scatter-gather list,
- * same rules and usage.
- */
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-		    int nents, enum dma_data_direction direction)
-{
-	/*
-	 * No need to do anything since the CPU isn't supposed to
-	 * touch this memory after we flushed it at mapping- or
-	 * sync-for-device time.
-	 */
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
-		       int nents, enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nents, i)
-		dma_cache_sync(dev, sg_virt(sg), sg->length, direction);
-}
-
-/* Now for the API extensions over the pci_ one */
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
 #endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/arch/avr32/include/asm/page.h b/arch/avr32/include/asm/page.h
index f805d1cb11bc..c5d2a3e2c62f 100644
--- a/arch/avr32/include/asm/page.h
+++ b/arch/avr32/include/asm/page.h
@@ -83,11 +83,9 @@ static inline int get_order(unsigned long size)
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 
-#define PHYS_PFN_OFFSET		(CONFIG_PHYS_OFFSET >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		(CONFIG_PHYS_OFFSET >> PAGE_SHIFT)
 
-#define pfn_to_page(pfn)	(mem_map + ((pfn) - PHYS_PFN_OFFSET))
-#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + PHYS_PFN_OFFSET)
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
 #endif /* CONFIG_NEED_MULTIPLE_NODES */
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
@@ -101,4 +99,6 @@ static inline int get_order(unsigned long size)
  */
 #define HIGHMEM_START		0x20000000UL
 
+#include <asm-generic/memory_model.h>
+
 #endif /* __ASM_AVR32_PAGE_H */
diff --git a/arch/avr32/include/asm/pci.h b/arch/avr32/include/asm/pci.h
index a32a02372017..0f5f134b896a 100644
--- a/arch/avr32/include/asm/pci.h
+++ b/arch/avr32/include/asm/pci.h
@@ -5,6 +5,4 @@
 
 #define PCI_DMA_BUS_IS_PHYS	(1)
 
-#include <asm-generic/pci-dma-compat.h>
-
 #endif /* __ASM_AVR32_PCI_H__ */
diff --git a/arch/avr32/include/uapi/asm/socket.h b/arch/avr32/include/uapi/asm/socket.h
index 2b65ed6b277c..1fd147f09a38 100644
--- a/arch/avr32/include/uapi/asm/socket.h
+++ b/arch/avr32/include/uapi/asm/socket.h
@@ -85,4 +85,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _UAPI__ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/include/uapi/asm/unistd.h b/arch/avr32/include/uapi/asm/unistd.h
index bbe2fba565cd..60c0f3afc1f9 100644
--- a/arch/avr32/include/uapi/asm/unistd.h
+++ b/arch/avr32/include/uapi/asm/unistd.h
@@ -333,5 +333,10 @@
 #define __NR_memfd_create	318
 #define __NR_bpf		319
 #define __NR_execveat		320
+#define __NR_accept4		321
+#define __NR_userfaultfd	322
+#define __NR_membarrier		323
+#define __NR_mlock2		324
+#define __NR_copy_file_range    325
 
 #endif /* _UAPI__ASM_AVR32_UNISTD_H */
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 164efa009e5b..2b4c54c04cb6 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -118,9 +118,9 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 	 * Increase core size to make room for GOT and set start
 	 * offset for GOT.
 	 */
-	module->core_size = ALIGN(module->core_size, 4);
-	module->arch.got_offset = module->core_size;
-	module->core_size += module->arch.got_size;
+	module->core_layout.size = ALIGN(module->core_layout.size, 4);
+	module->arch.got_offset = module->core_layout.size;
+	module->core_layout.size += module->arch.got_size;
 
 	return 0;
 
@@ -177,7 +177,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			if (!info->got_initialized) {
 				Elf32_Addr *gotent;
 
-				gotent = (module->module_core
+				gotent = (module->core_layout.base
 					  + module->arch.got_offset
 					  + info->got_offset);
 				*gotent = relocation;
@@ -255,8 +255,8 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			 */
 			pr_debug("GOTPC: PC=0x%x, got_offset=0x%lx, core=0x%p\n",
 				 relocation, module->arch.got_offset,
-				 module->module_core);
-			relocation -= ((unsigned long)module->module_core
+				 module->core_layout.base);
+			relocation -= ((unsigned long)module->core_layout.base
 				       + module->arch.got_offset);
 			*location = relocation;
 			break;
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index 209ae5ad3495..e6928896da2a 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -49,13 +49,13 @@ static struct resource __initdata kernel_data = {
 	.name	= "Kernel data",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_MEM,
+	.flags	= IORESOURCE_SYSTEM_RAM,
 };
 static struct resource __initdata kernel_code = {
 	.name	= "Kernel code",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_MEM,
+	.flags	= IORESOURCE_SYSTEM_RAM,
 	.sibling = &kernel_data,
 };
 
@@ -134,7 +134,7 @@ add_physical_memory(resource_size_t start, resource_size_t end)
 	new->start = start;
 	new->end = end;
 	new->name = "System RAM";
-	new->flags = IORESOURCE_MEM;
+	new->flags = IORESOURCE_SYSTEM_RAM;
 
 	*pprev = new;
 }
diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S
index f9c68fab0e2f..cb3991552f14 100644
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@@ -124,3 +124,12 @@ __sys_process_vm_writev:
 	call	sys_process_vm_writev
 	sub	sp, -4
 	popm	pc
+
+	.global __sys_copy_file_range
+	.type	__sys_copy_file_range,@function
+__sys_copy_file_range:
+	pushm	lr
+	st.w	--sp, ARG6
+	call	sys_copy_file_range
+	sub	sp, -4
+	popm	pc
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index c3b593bfc3b3..64d71a781fa8 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -334,4 +334,9 @@ sys_call_table:
 	.long	sys_memfd_create
 	.long	sys_bpf
 	.long	sys_execveat		/* 320 */
+	.long	sys_accept4
+	.long	sys_userfaultfd
+	.long	sys_membarrier
+	.long	sys_mlock2
+	.long   __sys_copy_file_range   /* 325 */
 	.long	sys_ni_syscall		/* r8 is saturated at nr_syscalls */
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 1d8b147282cf..bf445aa48282 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -17,7 +17,6 @@
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
-#include <linux/platform_data/mmc-atmel-mci.h>
 #include <linux/atmel-mci.h>
 
 #include <asm/io.h>
@@ -603,18 +602,11 @@ static void __init genclk_init_parent(struct clk *clk)
 	clk->parent = parent;
 }
 
-static struct dw_dma_platform_data dw_dmac0_data = {
-	.nr_channels	= 3,
-	.block_size	= 4095U,
-	.nr_masters	= 2,
-	.data_width	= { 2, 2 },
-};
-
 static struct resource dw_dmac0_resource[] = {
 	PBMEM(0xff200000),
 	IRQ(2),
 };
-DEFINE_DEV_DATA(dw_dmac, 0);
+DEFINE_DEV(dw_dmac, 0);
 DEV_CLK(hclk, dw_dmac0, hsb, 10);
 
 /* --------------------------------------------------------------------
@@ -1328,11 +1320,26 @@ static struct clk atmel_mci0_pclk = {
 	.index		= 9,
 };
 
+static bool at32_mci_dma_filter(struct dma_chan *chan, void *pdata)
+{
+	struct dw_dma_slave *sl = pdata;
+
+	if (!sl)
+		return false;
+
+	if (sl->dma_dev == chan->device->dev) {
+		chan->private = sl;
+		return true;
+	}
+
+	return false;
+}
+
 struct platform_device *__init
 at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct platform_device		*pdev;
-	struct mci_dma_data	        *slave;
+	struct dw_dma_slave	        *slave;
 	u32				pioa_mask;
 	u32				piob_mask;
 
@@ -1351,17 +1358,18 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 				ARRAY_SIZE(atmel_mci0_resource)))
 		goto fail;
 
-	slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
+	slave = kzalloc(sizeof(*slave), GFP_KERNEL);
 	if (!slave)
 		goto fail;
 
-	slave->sdata.dma_dev = &dw_dmac0_device.dev;
-	slave->sdata.src_id = 0;
-	slave->sdata.dst_id = 1;
-	slave->sdata.src_master = 1;
-	slave->sdata.dst_master = 0;
+	slave->dma_dev = &dw_dmac0_device.dev;
+	slave->src_id = 0;
+	slave->dst_id = 1;
+	slave->src_master = 1;
+	slave->dst_master = 0;
 
 	data->dma_slave = slave;
+	data->dma_filter = at32_mci_dma_filter;
 
 	if (platform_device_add_data(pdev, data,
 				sizeof(struct mci_platform_data)))
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 4f61378c3453..83c2a0021b56 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -14,8 +14,8 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
-#include <asm/gpio.h>
 #include <asm/io.h>
 
 #include <mach/portmux.h>
@@ -203,7 +203,7 @@ fail:
 
 static int direction_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct pio_device *pio = container_of(chip, struct pio_device, chip);
+	struct pio_device *pio = gpiochip_get_data(chip);
 	u32 mask = 1 << offset;
 
 	if (!(pio_readl(pio, PSR) & mask))
@@ -215,7 +215,7 @@ static int direction_input(struct gpio_chip *chip, unsigned offset)
 
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct pio_device *pio = container_of(chip, struct pio_device, chip);
+	struct pio_device *pio = gpiochip_get_data(chip);
 
 	return (pio_readl(pio, PDSR) >> offset) & 1;
 }
@@ -224,7 +224,7 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value);
 
 static int direction_output(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct pio_device *pio = container_of(chip, struct pio_device, chip);
+	struct pio_device *pio = gpiochip_get_data(chip);
 	u32 mask = 1 << offset;
 
 	if (!(pio_readl(pio, PSR) & mask))
@@ -237,7 +237,7 @@ static int direction_output(struct gpio_chip *chip, unsigned offset, int value)
 
 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	struct pio_device *pio = container_of(chip, struct pio_device, chip);
+	struct pio_device *pio = gpiochip_get_data(chip);
 	u32 mask = 1 << offset;
 
 	if (value)
@@ -335,7 +335,7 @@ gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq)
  */
 static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip)
 {
-	struct pio_device *pio = container_of(chip, struct pio_device, chip);
+	struct pio_device *pio = gpiochip_get_data(chip);
 	u32			psr, osr, imr, pdsr, pusr, ifsr, mdsr;
 	unsigned		i;
 	u32			mask;
@@ -397,7 +397,7 @@ static int __init pio_probe(struct platform_device *pdev)
 	pio->chip.label = pio->name;
 	pio->chip.base = pdev->id * 32;
 	pio->chip.ngpio = 32;
-	pio->chip.dev = &pdev->dev;
+	pio->chip.parent = &pdev->dev;
 	pio->chip.owner = THIS_MODULE;
 
 	pio->chip.direction_input = direction_input;
@@ -406,7 +406,7 @@ static int __init pio_probe(struct platform_device *pdev)
 	pio->chip.set = gpio_set;
 	pio->chip.dbg_show = pio_bank_show;
 
-	gpiochip_add(&pio->chip);
+	gpiochip_add_data(&pio->chip, pio);
 
 	gpio_irq_setup(pio, irq, gpio_irq_base);
 
diff --git a/arch/avr32/mm/dma-coherent.c b/arch/avr32/mm/dma-coherent.c
index 50cdb5b10f0f..92cf1fb2b3e6 100644
--- a/arch/avr32/mm/dma-coherent.c
+++ b/arch/avr32/mm/dma-coherent.c
@@ -9,9 +9,14 @@
 #include <linux/dma-mapping.h>
 #include <linux/gfp.h>
 #include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
 
-#include <asm/addrspace.h>
+#include <asm/processor.h>
 #include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
 
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size, int direction)
 {
@@ -93,60 +98,100 @@ static void __dma_free(struct device *dev, size_t size,
 		__free_page(page++);
 }
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *handle, gfp_t gfp)
+static void *avr32_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
 	struct page *page;
-	void *ret = NULL;
+	dma_addr_t phys;
 
 	page = __dma_alloc(dev, size, handle, gfp);
-	if (page)
-		ret = phys_to_uncached(page_to_phys(page));
+	if (!page)
+		return NULL;
+	phys = page_to_phys(page);
 
-	return ret;
+	if (dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs)) {
+		/* Now, map the page into P3 with write-combining turned on */
+		*handle = phys;
+		return __ioremap(phys, size, _PAGE_BUFFER);
+	} else {
+		return phys_to_uncached(phys);
+	}
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *cpu_addr, dma_addr_t handle)
+static void avr32_dma_free(struct device *dev, size_t size,
+		void *cpu_addr, dma_addr_t handle, struct dma_attrs *attrs)
 {
-	void *addr = phys_to_cached(uncached_to_phys(cpu_addr));
 	struct page *page;
 
-	pr_debug("dma_free_coherent addr %p (phys %08lx) size %u\n",
-		 cpu_addr, (unsigned long)handle, (unsigned)size);
-	BUG_ON(!virt_addr_valid(addr));
-	page = virt_to_page(addr);
+	if (dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs)) {
+		iounmap(cpu_addr);
+
+		page = phys_to_page(handle);
+	} else {
+		void *addr = phys_to_cached(uncached_to_phys(cpu_addr));
+
+		pr_debug("avr32_dma_free addr %p (phys %08lx) size %u\n",
+			 cpu_addr, (unsigned long)handle, (unsigned)size);
+
+		BUG_ON(!virt_addr_valid(addr));
+		page = virt_to_page(addr);
+	}
+
 	__dma_free(dev, size, page, handle);
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
-void *dma_alloc_writecombine(struct device *dev, size_t size,
-			     dma_addr_t *handle, gfp_t gfp)
+static dma_addr_t avr32_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction direction, struct dma_attrs *attrs)
 {
-	struct page *page;
-	dma_addr_t phys;
+	void *cpu_addr = page_address(page) + offset;
 
-	page = __dma_alloc(dev, size, handle, gfp);
-	if (!page)
-		return NULL;
+	dma_cache_sync(dev, cpu_addr, size, direction);
+	return virt_to_bus(cpu_addr);
+}
 
-	phys = page_to_phys(page);
-	*handle = phys;
+static int avr32_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nents, i) {
+		char *virt;
 
-	/* Now, map the page into P3 with write-combining turned on */
-	return __ioremap(phys, size, _PAGE_BUFFER);
+		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
+		virt = sg_virt(sg);
+		dma_cache_sync(dev, virt, sg->length, direction);
+	}
+
+	return nents;
 }
-EXPORT_SYMBOL(dma_alloc_writecombine);
 
-void dma_free_writecombine(struct device *dev, size_t size,
-			   void *cpu_addr, dma_addr_t handle)
+static void avr32_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
 {
-	struct page *page;
+	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
+}
 
-	iounmap(cpu_addr);
+static void avr32_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sglist, int nents,
+		enum dma_data_direction direction)
+{
+	int i;
+	struct scatterlist *sg;
 
-	page = phys_to_page(handle);
-	__dma_free(dev, size, page, handle);
+	for_each_sg(sglist, sg, nents, i)
+		dma_cache_sync(dev, sg_virt(sg), sg->length, direction);
 }
-EXPORT_SYMBOL(dma_free_writecombine);
+
+struct dma_map_ops avr32_dma_ops = {
+	.alloc			= avr32_dma_alloc,
+	.free			= avr32_dma_free,
+	.map_page		= avr32_dma_map_page,
+	.map_sg			= avr32_dma_map_sg,
+	.sync_single_for_device	= avr32_dma_sync_single_for_device,
+	.sync_sg_for_device	= avr32_dma_sync_sg_for_device,
+};
+EXPORT_SYMBOL(avr32_dma_ops);
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index af76634f8d98..a63c12259e77 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1233,8 +1233,6 @@ source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
 endmenu
 
 menu "Executable file formats"
diff --git a/arch/blackfin/include/asm/barrier.h b/arch/blackfin/include/asm/barrier.h
index dfb66fe88b34..7cca51cae5ff 100644
--- a/arch/blackfin/include/asm/barrier.h
+++ b/arch/blackfin/include/asm/barrier.h
@@ -78,8 +78,8 @@
 
 #endif /* !CONFIG_SMP */
 
-#define smp_mb__before_atomic()	barrier()
-#define smp_mb__after_atomic()	barrier()
+#define __smp_mb__before_atomic()	barrier()
+#define __smp_mb__after_atomic()	barrier()
 
 #include <asm-generic/barrier.h>
 
diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h
index 623cc7fb00bc..e7134bf94e3c 100644
--- a/arch/blackfin/include/asm/checksum.h
+++ b/arch/blackfin/include/asm/checksum.h
@@ -14,8 +14,8 @@
  */
 
 static inline __wsum
-__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+__csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		     __u8 proto, __wsum sum)
 {
 	unsigned int carry;
 
diff --git a/arch/blackfin/include/asm/cmpxchg.h b/arch/blackfin/include/asm/cmpxchg.h
index c05868cc61c1..253928854299 100644
--- a/arch/blackfin/include/asm/cmpxchg.h
+++ b/arch/blackfin/include/asm/cmpxchg.h
@@ -128,6 +128,5 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 #endif /* !CONFIG_SMP */
 
 #define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
-#define tas(ptr) ((void)xchg((ptr), 1))
 
 #endif /* __ARCH_BLACKFIN_CMPXCHG__ */
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index 054d9ec57d9d..3490570aaa82 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -8,36 +8,6 @@
 #define _BLACKFIN_DMA_MAPPING_H
 
 #include <asm/cacheflush.h>
-struct scatterlist;
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp);
-void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-		       dma_addr_t dma_handle);
-
-/*
- * Now for the API extensions over the pci_ one
- */
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-#define dma_supported(d, m)         (1)
-
-static inline int
-dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
-static inline int
-dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
 
 extern void
 __dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir);
@@ -66,102 +36,11 @@ _dma_sync(dma_addr_t addr, size_t size, enum dma_data_direction dir)
 		__dma_sync(addr, size, dir);
 }
 
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction dir)
-{
-	_dma_sync((dma_addr_t)ptr, size, dir);
-	return (dma_addr_t) ptr;
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page,
-	     unsigned long offset, size_t size,
-	     enum dma_data_direction dir)
-{
-	return dma_map_single(dev, page_address(page) + offset, size, dir);
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		 enum dma_data_direction dir)
-{
-	BUG_ON(!valid_dma_direction(dir));
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
-	       enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, dma_addr, size, dir);
-}
+extern struct dma_map_ops bfin_dma_ops;
 
-extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction dir);
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-	     int nhwentries, enum dma_data_direction dir)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	BUG_ON(!valid_dma_direction(dir));
+	return &bfin_dma_ops;
 }
 
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction dir)
-{
-	BUG_ON(!valid_dma_direction(dir));
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction dir)
-{
-	_dma_sync(handle + offset, size, dir);
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
-			enum dma_data_direction dir)
-{
-	dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
-			   enum dma_data_direction dir)
-{
-	dma_sync_single_range_for_device(dev, handle, 0, size, dir);
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
-		    enum dma_data_direction dir)
-{
-	BUG_ON(!valid_dma_direction(dir));
-}
-
-extern void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-		       int nents, enum dma_data_direction dir);
-
-static inline void
-dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-	       enum dma_data_direction dir)
-{
-	_dma_sync((dma_addr_t)vaddr, size, dir);
-}
-
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
 #endif				/* _BLACKFIN_DMA_MAPPING_H */
diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h
index 14efc0db1ade..11ea1cb35036 100644
--- a/arch/blackfin/include/asm/pci.h
+++ b/arch/blackfin/include/asm/pci.h
@@ -4,7 +4,6 @@
 #define _ASM_BFIN_PCI_H
 
 #include <linux/scatterlist.h>
-#include <asm-generic/pci-dma-compat.h>
 #include <asm-generic/pci.h>
 
 #define PCIBIOS_MIN_IO 0x00001000
diff --git a/arch/blackfin/include/asm/pgtable.h b/arch/blackfin/include/asm/pgtable.h
index b88a1558b0b9..c1ee3d6533fb 100644
--- a/arch/blackfin/include/asm/pgtable.h
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -97,6 +97,8 @@ extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
 					  unsigned long);
 #define HAVE_ARCH_FB_UNMAPPED_AREA
 
+#define pgprot_writecombine pgprot_noncached
+
 #include <asm-generic/pgtable.h>
 
 #endif				/* _BLACKFIN_PGTABLE_H */
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 90612a7f2cf3..12f5d6851bbc 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -168,12 +168,6 @@ static inline int bad_user_access_length(void)
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-#define copy_to_user_ret(to, from, n, retval) ({ if (copy_to_user(to, from, n))\
-				                 return retval; })
-
-#define copy_from_user_ret(to, from, n, retval) ({ if (copy_from_user(to, from, n))\
-                                                   return retval; })
-
 static inline unsigned long __must_check
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index a017359c1826..c5d31287de01 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -11,6 +11,8 @@
 #include <linux/err.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/gpio/driver.h>
+/* FIXME: consumer API required for gpio_set_value() etc, get rid of this */
 #include <linux/gpio.h>
 #include <linux/irq.h>
 
@@ -1159,7 +1161,7 @@ static int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio,
 
 static int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio)
 {
-	return bfin_gpio_get_value(gpio);
+	return !!bfin_gpio_get_value(gpio);
 }
 
 static void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value)
@@ -1197,7 +1199,7 @@ static struct gpio_chip bfin_chip = {
 
 static int __init bfin_gpiolib_setup(void)
 {
-	return gpiochip_add(&bfin_chip);
+	return gpiochip_add_data(&bfin_chip, NULL);
 }
 arch_initcall(bfin_gpiolib_setup);
 #endif
diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c
index 86b1cd3a0309..e272bca93c64 100644
--- a/arch/blackfin/kernel/debug-mmrs.c
+++ b/arch/blackfin/kernel/debug-mmrs.c
@@ -11,9 +11,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/i2c/bfin_twi.h>
+#include <linux/gpio.h>
 
 #include <asm/blackfin.h>
-#include <asm/gpio.h>
 #include <asm/gptimers.h>
 #include <asm/bfin_can.h>
 #include <asm/bfin_dma.h>
diff --git a/arch/blackfin/kernel/dma-mapping.c b/arch/blackfin/kernel/dma-mapping.c
index df437e52d9df..771afe6e4264 100644
--- a/arch/blackfin/kernel/dma-mapping.c
+++ b/arch/blackfin/kernel/dma-mapping.c
@@ -78,8 +78,8 @@ static void __free_dma_pages(unsigned long addr, unsigned int pages)
 	spin_unlock_irqrestore(&dma_page_lock, flags);
 }
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t gfp)
+static void *bfin_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
 {
 	void *ret;
 
@@ -92,15 +92,12 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 
 	return ret;
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void
-dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-		  dma_addr_t dma_handle)
+static void bfin_dma_free(struct device *dev, size_t size, void *vaddr,
+		  dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	__free_dma_pages((unsigned long)vaddr, get_pages(size));
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
 /*
  * Streaming DMA mappings
@@ -112,9 +109,9 @@ void __dma_sync(dma_addr_t addr, size_t size,
 }
 EXPORT_SYMBOL(__dma_sync);
 
-int
-dma_map_sg(struct device *dev, struct scatterlist *sg_list, int nents,
-	   enum dma_data_direction direction)
+static int bfin_dma_map_sg(struct device *dev, struct scatterlist *sg_list,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -126,10 +123,10 @@ dma_map_sg(struct device *dev, struct scatterlist *sg_list, int nents,
 
 	return nents;
 }
-EXPORT_SYMBOL(dma_map_sg);
 
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg_list,
-			    int nelems, enum dma_data_direction direction)
+static void bfin_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sg_list, int nelems,
+		enum dma_data_direction direction)
 {
 	struct scatterlist *sg;
 	int i;
@@ -139,4 +136,31 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg_list,
 		__dma_sync(sg_dma_address(sg), sg_dma_len(sg), direction);
 	}
 }
-EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+static dma_addr_t bfin_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
+{
+	dma_addr_t handle = (dma_addr_t)(page_address(page) + offset);
+
+	_dma_sync(handle, size, dir);
+	return handle;
+}
+
+static inline void bfin_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	_dma_sync(handle, size, dir);
+}
+
+struct dma_map_ops bfin_dma_ops = {
+	.alloc			= bfin_dma_alloc,
+	.free			= bfin_dma_free,
+
+	.map_page		= bfin_dma_map_page,
+	.map_sg			= bfin_dma_map_sg,
+
+	.sync_single_for_device	= bfin_dma_sync_single_for_device,
+	.sync_sg_for_device	= bfin_dma_sync_sg_for_device,
+};
+EXPORT_SYMBOL(bfin_dma_ops);
diff --git a/arch/blackfin/kernel/perf_event.c b/arch/blackfin/kernel/perf_event.c
index 1e9c8b0bf486..170d786807c4 100644
--- a/arch/blackfin/kernel/perf_event.c
+++ b/arch/blackfin/kernel/perf_event.c
@@ -14,7 +14,7 @@
  *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
  *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
  *
  * ppc:
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index c9eec84aa258..d920b959ff3a 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -35,6 +35,7 @@ SECTIONS
 #endif
 		LOCK_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		KPROBES_TEXT
 #ifdef CONFIG_ROMKERNEL
 		__sinittext = .;
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index a3a572352769..80bcfd1d023e 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -279,7 +279,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif
 
 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/spi/ad7879.h>
+#include <linux/platform_data/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
 	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index d4219e8e5ab8..571edfd2ecf3 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -477,7 +477,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif
 
 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/spi/ad7879.h>
+#include <linux/platform_data/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
 	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index a0f5856a5ff8..c1acce4c2e45 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -29,7 +29,7 @@
 #include <asm/dpmc.h>
 
 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/spi/ad7879.h>
+#include <linux/platform_data/ad7879.h>
 #define LCD_BACKLIGHT_GPIO 0x40
 /* TLL6527M uses TLL7UIQ35 / ADI LCD EZ Extender. AD7879 AUX GPIO is used for
  * LCD Backlight Enable
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 88a19fc9844d..eaec7b4832a2 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -404,7 +404,7 @@ static struct mtd_partition bfin_plat_nand_partitions[] = {
 #define BFIN_NAND_PLAT_ALE 1
 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 
 	if (cmd == NAND_CMD_NONE)
 		return;
@@ -776,7 +776,7 @@ static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 #endif
 
 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/spi/ad7879.h>
+#include <linux/platform_data/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
 	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
index ae2fcbb00119..1b6a52ad8a0e 100644
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ b/arch/blackfin/mach-bf538/boards/ezkit.c
@@ -15,9 +15,9 @@
 #include <linux/spi/flash.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/dma.h>
-#include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
@@ -521,7 +521,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 #endif	/* CONFIG_SPI_BFIN5XX */
 
 #if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/spi/ad7879.h>
+#include <linux/platform_data/ad7879.h>
 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 	.model			= 7879,	/* Model = AD7879 */
 	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
diff --git a/arch/blackfin/mach-bf538/ext-gpio.c b/arch/blackfin/mach-bf538/ext-gpio.c
index 471a9b184d5b..48c100228f2d 100644
--- a/arch/blackfin/mach-bf538/ext-gpio.c
+++ b/arch/blackfin/mach-bf538/ext-gpio.c
@@ -8,8 +8,8 @@
 
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/gpio.h>
 #include <asm/blackfin.h>
-#include <asm/gpio.h>
 #include <asm/portmux.h>
 
 #define DEFINE_REG(reg, off) \
@@ -116,9 +116,9 @@ static struct gpio_chip bf538_porte_chip = {
 
 static int __init bf538_extgpio_setup(void)
 {
-	return gpiochip_add(&bf538_portc_chip) |
-		gpiochip_add(&bf538_portd_chip) |
-		gpiochip_add(&bf538_porte_chip);
+	return gpiochip_add_data(&bf538_portc_chip, NULL) |
+		gpiochip_add_data(&bf538_portd_chip, NULL) |
+		gpiochip_add_data(&bf538_porte_chip, NULL);
 }
 arch_initcall(bf538_extgpio_setup);
 
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 6d5ffdead067..120c9941c242 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -17,9 +17,9 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/musb.h>
+#include <linux/gpio.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/dma.h>
-#include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/portmux.h>
 #include <asm/bfin_sdh.h>
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 4204b9842532..3cdd4835a9f7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -20,9 +20,9 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_data/pinctrl-adi2.h>
+#include <linux/gpio.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/dma.h>
-#include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/dpmc.h>
 #include <asm/bfin_sport.h>
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index 6ab951534d79..37f8f25a1347 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -267,7 +267,7 @@ static struct mtd_partition bfin_plat_nand_partitions[] = {
 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 				    unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 
 	if (cmd == NAND_CMD_NONE)
 		return;
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 2de71e8c104b..f35525b55819 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -443,7 +443,7 @@ static const struct ppi_info ppi_info = {
 };
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7183)
-#include <media/adv7183.h>
+#include <media/i2c/adv7183.h>
 static struct v4l2_input adv7183_inputs[] = {
 	{
 		.index = 0,
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 2c61fc0c98f9..aad5d7416886 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -21,8 +21,8 @@
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/platform_data/pinctrl-adi2.h>
 #include <linux/spi/adi_spi3.h>
+#include <linux/gpio.h>
 #include <asm/dma.h>
-#include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/dpmc.h>
 #include <asm/portmux.h>
@@ -933,7 +933,7 @@ static struct bfin_capture_config bfin_capture_data = {
 #endif
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7842)
-#include <media/adv7842.h>
+#include <media/i2c/adv7842.h>
 
 static struct v4l2_input adv7842_inputs[] = {
 	{
@@ -1084,7 +1084,7 @@ static const struct ppi_info ppi_info = {
 };
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7511)
-#include <media/adv7511.h>
+#include <media/i2c/adv7511.h>
 
 static struct v4l2_output adv7511_outputs[] = {
 	{
@@ -1125,7 +1125,7 @@ static struct bfin_display_config bfin_display_data = {
 #endif
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7343)
-#include <media/adv7343.h>
+#include <media/i2c/adv7343.h>
 
 static struct v4l2_output adv7343_outputs[] = {
 	{
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index e8d4d748d0fd..4986b4fbcee9 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -17,13 +17,13 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 #include <linux/syscore_ops.h>
+#include <linux/gpio.h>
 #include <asm/delay.h>
 #ifdef CONFIG_IPIPE
 #include <linux/ipipe.h>
 #endif
 #include <asm/traps.h>
 #include <asm/blackfin.h>
-#include <asm/gpio.h>
 #include <asm/irq_handler.h>
 #include <asm/dpmc.h>
 #include <asm/traps.h>
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index a66d979ec651..5ece38a5b758 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -15,9 +15,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 
 #include <asm/cplb.h>
-#include <asm/gpio.h>
 #include <asm/dma.h>
 #include <asm/dpmc.h>
 #include <asm/pm.h>
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 0030e21cfceb..23c4ef5f8bdc 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -333,7 +333,7 @@ void secondary_start_kernel(void)
 
 	/* We are done with local CPU inits, unblock the boot CPU. */
 	set_cpu_online(cpu, true);
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void __init smp_prepare_boot_cpu(void)
diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig
index 77ea09b8bce1..5aa8ea8bad2d 100644
--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -17,6 +17,7 @@ config C6X
 	select OF_EARLY_FLATTREE
 	select GENERIC_CLOCKEVENTS
 	select MODULES_USE_ELF_RELA
+	select ARCH_NO_COHERENT_DMA_MMAP
 
 config MMU
 	def_bool n
@@ -35,6 +36,7 @@ config GENERIC_HWEIGHT
 
 config GENERIC_BUG
 	def_bool y
+	depends on BUG
 
 config C6X_BIG_KERNEL
 	bool "Build a big kernel"
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index 945544ec603e..64465e7e2245 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -4,6 +4,7 @@ generic-y += auxvec.h
 generic-y += barrier.h
 generic-y += bitsperlong.h
 generic-y += bugs.h
+generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += current.h
 generic-y += device.h
diff --git a/arch/c6x/include/asm/checksum.h b/arch/c6x/include/asm/checksum.h
index 7246816d6e4d..249b0e421ddc 100644
--- a/arch/c6x/include/asm/checksum.h
+++ b/arch/c6x/include/asm/checksum.h
@@ -10,8 +10,8 @@
 #define _ASM_C6X_CHECKSUM_H
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	unsigned long long tmp;
 
diff --git a/arch/c6x/include/asm/clkdev.h b/arch/c6x/include/asm/clkdev.h
deleted file mode 100644
index 76a070b1c2e5..000000000000
--- a/arch/c6x/include/asm/clkdev.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef _ASM_CLKDEV_H
-#define _ASM_CLKDEV_H
-
-#include <linux/slab.h>
-
-struct clk;
-
-static inline int __clk_get(struct clk *clk)
-{
-	return 1;
-}
-
-static inline void __clk_put(struct clk *clk)
-{
-}
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
-	return kzalloc(size, GFP_KERNEL);
-}
-
-#endif /* _ASM_CLKDEV_H */
diff --git a/arch/c6x/include/asm/cmpxchg.h b/arch/c6x/include/asm/cmpxchg.h
index b27c8cefb8c3..93d0a5a047a2 100644
--- a/arch/c6x/include/asm/cmpxchg.h
+++ b/arch/c6x/include/asm/cmpxchg.h
@@ -47,8 +47,6 @@ static inline unsigned int __xchg(unsigned int x, volatile void *ptr, int size)
 #define xchg(ptr, x) \
 	((__typeof__(*(ptr)))__xchg((unsigned int)(x), (void *) (ptr), \
 				    sizeof(*(ptr))))
-#define tas(ptr)    xchg((ptr), 1)
-
 
 #include <asm-generic/cmpxchg-local.h>
 
diff --git a/arch/c6x/include/asm/dma-mapping.h b/arch/c6x/include/asm/dma-mapping.h
index bbd7774e4d4e..6b5cd7b0cf32 100644
--- a/arch/c6x/include/asm/dma-mapping.h
+++ b/arch/c6x/include/asm/dma-mapping.h
@@ -12,104 +12,22 @@
 #ifndef _ASM_C6X_DMA_MAPPING_H
 #define _ASM_C6X_DMA_MAPPING_H
 
-#include <linux/dma-debug.h>
-#include <asm-generic/dma-coherent.h>
-
-#define dma_supported(d, m)	1
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t addr,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction dir)
-{
-}
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
-		return -EIO;
-
-	*dev->dma_mask = dma_mask;
-
-	return 0;
-}
-
 /*
  * DMA errors are defined by all-bits-set in the DMA address.
  */
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	debug_dma_mapping_error(dev, dma_addr);
-	return dma_addr == ~0;
-}
-
-extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-				 size_t size, enum dma_data_direction dir);
+#define DMA_ERROR_CODE ~0
 
-extern void dma_unmap_single(struct device *dev, dma_addr_t handle,
-			     size_t size, enum dma_data_direction dir);
+extern struct dma_map_ops c6x_dma_ops;
 
-extern int dma_map_sg(struct device *dev, struct scatterlist *sglist,
-		      int nents, enum dma_data_direction direction);
-
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
-			 int nents, enum dma_data_direction direction);
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction dir)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	dma_addr_t handle;
-
-	handle = dma_map_single(dev, page_address(page) + offset, size, dir);
-
-	debug_dma_map_page(dev, page, offset, size, dir, handle, false);
-
-	return handle;
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
-		size_t size, enum dma_data_direction dir)
-{
-	dma_unmap_single(dev, handle, size, dir);
-
-	debug_dma_unmap_page(dev, handle, size, dir, false);
+	return &c6x_dma_ops;
 }
 
-extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
-				    size_t size, enum dma_data_direction dir);
-
-extern void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
-				       size_t size,
-				       enum dma_data_direction dir);
-
-extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction dir);
-
-extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-				   int nents, enum dma_data_direction dir);
-
 extern void coherent_mem_init(u32 start, u32 size);
-extern void *dma_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t);
-extern void dma_free_coherent(struct device *, size_t, void *, dma_addr_t);
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
-#define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
-
-/* Not supported for now */
-static inline int dma_mmap_coherent(struct device *dev,
-				    struct vm_area_struct *vma, void *cpu_addr,
-				    dma_addr_t dma_addr, size_t size)
-{
-	return -EINVAL;
-}
-
-static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size)
-{
-	return -EINVAL;
-}
+void *c6x_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+		gfp_t gfp, struct dma_attrs *attrs);
+void c6x_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs);
 
 #endif	/* _ASM_C6X_DMA_MAPPING_H */
diff --git a/arch/c6x/kernel/dma.c b/arch/c6x/kernel/dma.c
index ab7b12de144d..8a80f3a250c0 100644
--- a/arch/c6x/kernel/dma.c
+++ b/arch/c6x/kernel/dma.c
@@ -36,110 +36,101 @@ static void c6x_dma_sync(dma_addr_t handle, size_t size,
 	}
 }
 
-dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-			  enum dma_data_direction dir)
+static dma_addr_t c6x_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
 {
-	dma_addr_t addr = virt_to_phys(ptr);
+	dma_addr_t handle = virt_to_phys(page_address(page) + offset);
 
-	c6x_dma_sync(addr, size, dir);
-
-	debug_dma_map_page(dev, virt_to_page(ptr),
-			   (unsigned long)ptr & ~PAGE_MASK, size,
-			   dir, addr, true);
-	return addr;
+	c6x_dma_sync(handle, size, dir);
+	return handle;
 }
-EXPORT_SYMBOL(dma_map_single);
-
 
-void dma_unmap_single(struct device *dev, dma_addr_t handle,
-		      size_t size, enum dma_data_direction dir)
+static void c6x_dma_unmap_page(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	c6x_dma_sync(handle, size, dir);
-
-	debug_dma_unmap_page(dev, handle, size, dir, true);
 }
-EXPORT_SYMBOL(dma_unmap_single);
-
 
-int dma_map_sg(struct device *dev, struct scatterlist *sglist,
-	       int nents, enum dma_data_direction dir)
+static int c6x_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
 
-	for_each_sg(sglist, sg, nents, i)
-		sg->dma_address = dma_map_single(dev, sg_virt(sg), sg->length,
-						 dir);
-
-	debug_dma_map_sg(dev, sglist, nents, nents, dir);
+	for_each_sg(sglist, sg, nents, i) {
+		sg->dma_address = sg_phys(sg);
+		c6x_dma_sync(sg->dma_address, sg->length, dir);
+	}
 
 	return nents;
 }
-EXPORT_SYMBOL(dma_map_sg);
-
 
-void dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
-		  int nents, enum dma_data_direction dir)
+static void c6x_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+		  int nents, enum dma_data_direction dir,
+		  struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
 
 	for_each_sg(sglist, sg, nents, i)
-		dma_unmap_single(dev, sg_dma_address(sg), sg->length, dir);
+		c6x_dma_sync(sg_dma_address(sg), sg->length, dir);
 
-	debug_dma_unmap_sg(dev, sglist,	nents, dir);
 }
-EXPORT_SYMBOL(dma_unmap_sg);
 
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
-			     size_t size, enum dma_data_direction dir)
+static void c6x_dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir)
 {
 	c6x_dma_sync(handle, size, dir);
 
-	debug_dma_sync_single_for_cpu(dev, handle, size, dir);
 }
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
 
-
-void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
-				size_t size, enum dma_data_direction dir)
+static void c6x_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
 	c6x_dma_sync(handle, size, dir);
 
-	debug_dma_sync_single_for_device(dev, handle, size, dir);
 }
-EXPORT_SYMBOL(dma_sync_single_for_device);
-
 
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist,
-			 int nents, enum dma_data_direction dir)
+static void c6x_dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sglist, int nents,
+		enum dma_data_direction dir)
 {
 	struct scatterlist *sg;
 	int i;
 
 	for_each_sg(sglist, sg, nents, i)
-		dma_sync_single_for_cpu(dev, sg_dma_address(sg),
+		c6x_dma_sync_single_for_cpu(dev, sg_dma_address(sg),
 					sg->length, dir);
 
-	debug_dma_sync_sg_for_cpu(dev, sglist, nents, dir);
 }
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
-
 
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
-			    int nents, enum dma_data_direction dir)
+static void c6x_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sglist, int nents,
+		enum dma_data_direction dir)
 {
 	struct scatterlist *sg;
 	int i;
 
 	for_each_sg(sglist, sg, nents, i)
-		dma_sync_single_for_device(dev, sg_dma_address(sg),
+		c6x_dma_sync_single_for_device(dev, sg_dma_address(sg),
 					   sg->length, dir);
 
-	debug_dma_sync_sg_for_device(dev, sglist, nents, dir);
 }
-EXPORT_SYMBOL(dma_sync_sg_for_device);
 
+struct dma_map_ops c6x_dma_ops = {
+	.alloc			= c6x_dma_alloc,
+	.free			= c6x_dma_free,
+	.map_page		= c6x_dma_map_page,
+	.unmap_page		= c6x_dma_unmap_page,
+	.map_sg			= c6x_dma_map_sg,
+	.unmap_sg		= c6x_dma_unmap_sg,
+	.sync_single_for_device	= c6x_dma_sync_single_for_device,
+	.sync_single_for_cpu	= c6x_dma_sync_single_for_cpu,
+	.sync_sg_for_device	= c6x_dma_sync_sg_for_device,
+	.sync_sg_for_cpu	= c6x_dma_sync_sg_for_cpu,
+};
+EXPORT_SYMBOL(c6x_dma_ops);
 
 /* Number of entries preallocated for DMA-API debugging */
 #define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
diff --git a/arch/c6x/kernel/setup.c b/arch/c6x/kernel/setup.c
index 72e17f7ebd6f..786e36e2f61d 100644
--- a/arch/c6x/kernel/setup.c
+++ b/arch/c6x/kernel/setup.c
@@ -281,8 +281,6 @@ notrace void __init machine_init(unsigned long dt_ptr)
 	 */
 	set_ist(_vectors_start);
 
-	lockdep_init();
-
 	/*
 	 * dtb is passed in from bootloader.
 	 * fdt is linked in blob.
diff --git a/arch/c6x/kernel/vmlinux.lds.S b/arch/c6x/kernel/vmlinux.lds.S
index 5a6e141d1641..50bc10f97bcb 100644
--- a/arch/c6x/kernel/vmlinux.lds.S
+++ b/arch/c6x/kernel/vmlinux.lds.S
@@ -72,6 +72,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		KPROBES_TEXT
 		*(.fixup)
 		*(.gnu.warning)
diff --git a/arch/c6x/mm/dma-coherent.c b/arch/c6x/mm/dma-coherent.c
index 4187e5180373..f7ee63af2541 100644
--- a/arch/c6x/mm/dma-coherent.c
+++ b/arch/c6x/mm/dma-coherent.c
@@ -73,8 +73,8 @@ static void __free_dma_pages(u32 addr, int order)
  * Allocate DMA coherent memory space and return both the kernel
  * virtual and DMA address for that space.
  */
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *handle, gfp_t gfp)
+void *c6x_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+		gfp_t gfp, struct dma_attrs *attrs)
 {
 	u32 paddr;
 	int order;
@@ -94,13 +94,12 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 
 	return phys_to_virt(paddr);
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
 /*
  * Free DMA coherent memory as defined by the above mapping.
  */
-void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-		       dma_addr_t dma_handle)
+void c6x_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	int order;
 
@@ -111,7 +110,6 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 
 	__free_dma_pages(virt_to_phys(vaddr), order);
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
 /*
  * Initialise the coherent DMA memory allocator using the given uncached region.
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index 7d307cce8bd8..b6549e54be29 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -468,7 +468,7 @@ etrax_console_device(struct console* co, int *index)
 #endif
 }
 
-static struct console sercons = {
+static struct console ser_console = {
 	name : "ttyS",
 	write: console_write,
 	read : NULL,
@@ -480,7 +480,7 @@ static struct console sercons = {
 	cflag : 0,
 	next : NULL
 };
-static struct console sercons0 = {
+static struct console ser0_console = {
 	name : "ttyS",
 	write: console_write,
 	read : NULL,
@@ -493,7 +493,7 @@ static struct console sercons0 = {
 	next : NULL
 };
 
-static struct console sercons1 = {
+static struct console ser1_console = {
 	name : "ttyS",
 	write: console_write,
 	read : NULL,
@@ -505,7 +505,7 @@ static struct console sercons1 = {
 	cflag : 0,
 	next : NULL
 };
-static struct console sercons2 = {
+static struct console ser2_console = {
 	name : "ttyS",
 	write: console_write,
 	read : NULL,
@@ -517,7 +517,7 @@ static struct console sercons2 = {
 	cflag : 0,
 	next : NULL
 };
-static struct console sercons3 = {
+static struct console ser3_console = {
 	name : "ttyS",
 	write: console_write,
 	read : NULL,
@@ -539,17 +539,17 @@ init_etrax_debug(void)
 	static int first = 1;
 
 	if (!first) {
-		unregister_console(&sercons);
-		register_console(&sercons0);
-		register_console(&sercons1);
-		register_console(&sercons2);
-		register_console(&sercons3);
+		unregister_console(&ser_console);
+		register_console(&ser0_console);
+		register_console(&ser1_console);
+		register_console(&ser2_console);
+		register_console(&ser3_console);
                 init_dummy_console();
 		return 0;
 	}
 
 	first = 0;
-	register_console(&sercons);
+	register_console(&ser_console);
 	start_port(port);
 #ifdef CONFIG_ETRAX_KGDB
 	start_port(kgdb_port);
diff --git a/arch/cris/arch-v10/kernel/head.S b/arch/cris/arch-v10/kernel/head.S
index a4877a421756..a74aa233b84e 100644
--- a/arch/cris/arch-v10/kernel/head.S
+++ b/arch/cris/arch-v10/kernel/head.S
@@ -5,6 +5,8 @@
  *
  */
 
+#include <linux/init.h>
+
 #define ASSEMBLER_MACROS_ONLY
 /* The IO_* macros use the ## token concatenation operator, so
    -traditional must not be used when assembling this file.  */
@@ -25,7 +27,7 @@
 	.globl	romfs_in_flash
 	.globl  swapper_pg_dir
 
-	.text
+	__HEAD
 
 	;; This is the entry point of the kernel. We are in supervisor mode.
 	;; 0x00000000 if Flash, 0x40004000 if DRAM
@@ -159,7 +161,7 @@ _inflash0:
 
 	;; Put this in a suitable section where we can reclaim storage
 	;; after init.
-	.section ".init.text", "ax"
+	__INIT
 _inflash:
 #ifdef CONFIG_ETRAX_ETHERNET
 	;; Start MII clock to make sure it is running when tranceiver is reset
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index 877da1908234..617645d21b20 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -2719,9 +2719,7 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig
 	/* Acquire the mm page semaphore. */
 	down_read(&current->mm->mmap_sem);
 
-	err = get_user_pages(current,
-			     current->mm,
-			     (unsigned long int)(oper.indata + prev_ix),
+	err = get_user_pages((unsigned long int)(oper.indata + prev_ix),
 			     noinpages,
 			     0,  /* read access only for in data */
 			     0, /* no force */
@@ -2736,9 +2734,7 @@ static int cryptocop_ioctl_process(struct inode *inode, struct file *filp, unsig
 	}
 	noinpages = err;
 	if (oper.do_cipher){
-		err = get_user_pages(current,
-				     current->mm,
-				     (unsigned long int)oper.cipher_outdata,
+		err = get_user_pages((unsigned long int)oper.cipher_outdata,
 				     nooutpages,
 				     1, /* write access for out data */
 				     0, /* no force */
diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
index 7fb52128ddc9..5aa3f5162310 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c
@@ -36,7 +36,6 @@
 #define CE_BIT 12
 
 struct mtd_info_wrapper {
-	struct mtd_info info;
 	struct nand_chip chip;
 };
 
@@ -52,7 +51,7 @@ static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
 {
 	unsigned long flags;
 	reg_pio_rw_dout dout;
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 
 	local_irq_save(flags);
 
@@ -148,10 +147,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 
 	/* Get pointer to private data */
 	this = &wrapper->chip;
-	crisv32_mtd = &wrapper->info;
-
-	/* Link the private data with the MTD structure */
-	crisv32_mtd->priv = this;
+	crisv32_mtd = nand_to_mtd(this);
 
 	/* Set address of NAND IO lines */
 	this->IO_ADDR_R = read_cs;
diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
index e03238454b0e..a7c17b0f172a 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c
@@ -31,7 +31,6 @@
 #define BY_BIT 7
 
 struct mtd_info_wrapper {
-	struct mtd_info info;
 	struct nand_chip chip;
 };
 
@@ -51,7 +50,7 @@ static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
 {
 	unsigned long flags;
 	reg_gio_rw_pa_dout dout;
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 
 	local_irq_save(flags);
 
@@ -129,7 +128,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 
 	/* Get pointer to private data */
 	this = &wrapper->chip;
-	crisv32_mtd = &wrapper->info;
+	crisv32_mtd = nand_to_mtd(this);
 
 	pa_oe.oe |= 1 << CE_BIT;
 	pa_oe.oe |= 1 << ALE_BIT;
@@ -141,9 +140,6 @@ struct mtd_info *__init crisv32_nand_flash_probe(void)
 	bif_cfg.gated_csp1 = regk_bif_core_wr;
 	REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg);
 
-	/* Link the private data with the MTD structure */
-	crisv32_mtd->priv = this;
-
 	/* Set address of NAND IO lines */
 	this->IO_ADDR_R = read_cs;
 	this->IO_ADDR_W = write_cs;
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index ee55578d9834..8d5efa58cce1 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -16,21 +16,18 @@
 #include <linux/gfp.h>
 #include <asm/io.h>
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t gfp)
+static void *v32_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp,  struct dma_attrs *attrs)
 {
 	void *ret;
-	int order = get_order(size);
+
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
 
-	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
-		return ret;
-
 	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
 		gfp |= GFP_DMA;
 
-	ret = (void *)__get_free_pages(gfp, order);
+	ret = (void *)__get_free_pages(gfp,  get_order(size));
 
 	if (ret != NULL) {
 		memset(ret, 0, size);
@@ -39,12 +36,45 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 	return ret;
 }
 
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle)
+static void v32_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
+{
+	free_pages((unsigned long)vaddr, get_order(size));
+}
+
+static inline dma_addr_t v32_dma_map_page(struct device *dev,
+		struct page *page, unsigned long offset, size_t size,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
-	int order = get_order(size);
+	return page_to_phys(page) + offset;
+}
 
-	if (!dma_release_from_coherent(dev, order, vaddr))
-		free_pages((unsigned long)vaddr, order);
+static inline int v32_dma_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	printk("Map sg\n");
+	return nents;
+}
+
+static inline int v32_dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s,
+         * so we can't guarantee allocations that must be
+         * within a tighter range than GFP_DMA..
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+	return 1;
 }
 
+struct dma_map_ops v32_dma_ops = {
+	.alloc			= v32_dma_alloc,
+	.free			= v32_dma_free,
+	.map_page		= v32_dma_map_page,
+	.map_sg                 = v32_dma_map_sg,
+	.dma_supported		= v32_dma_supported,
+};
+EXPORT_SYMBOL(v32_dma_ops);
diff --git a/arch/cris/arch-v32/kernel/head.S b/arch/cris/arch-v32/kernel/head.S
index ea6366800df7..5ce83eb54f58 100644
--- a/arch/cris/arch-v32/kernel/head.S
+++ b/arch/cris/arch-v32/kernel/head.S
@@ -4,6 +4,8 @@
  * Copyright (C) 2003, Axis Communications AB
  */
 
+#include <linux/init.h>
+
 #define ASSEMBLER_MACROS_ONLY
 
 /*
@@ -36,7 +38,7 @@
 	.global nand_boot
 	.global swapper_pg_dir
 
-	.text
+	__HEAD
 tstart:
 	;; This is the entry point of the kernel. The CPU is currently in
 	;; supervisor mode.
@@ -177,7 +179,7 @@ _inflash0:
 
 	;; Put the following in a section so that storage for it can be
 	;; reclaimed after init is finished.
-	.section ".init.text", "ax"
+	__INIT
 
 _inflash:
 
diff --git a/arch/cris/include/arch-v10/arch/checksum.h b/arch/cris/include/arch-v10/arch/checksum.h
index b8000c5d7fe1..d1d1bd9e1090 100644
--- a/arch/cris/include/arch-v10/arch/checksum.h
+++ b/arch/cris/include/arch-v10/arch/checksum.h
@@ -9,8 +9,8 @@
  */
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	__wsum res;
 	__asm__ ("add.d %2, %0\n\t"
diff --git a/arch/cris/include/arch-v32/arch/checksum.h b/arch/cris/include/arch-v32/arch/checksum.h
index e5dcfce6e0dc..65cf205b1329 100644
--- a/arch/cris/include/arch-v32/arch/checksum.h
+++ b/arch/cris/include/arch-v32/arch/checksum.h
@@ -11,7 +11,7 @@
  */
 static inline __wsum
 csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-		   unsigned short len, unsigned short proto, __wsum sum)
+		   __u32 len, __u8 proto, __wsum sum)
 {
 	__wsum res;
 
diff --git a/arch/cris/include/asm/checksum.h b/arch/cris/include/asm/checksum.h
index 75dcb77d6cb0..ea949c60b190 100644
--- a/arch/cris/include/asm/checksum.h
+++ b/arch/cris/include/asm/checksum.h
@@ -63,9 +63,8 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
  */
 
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
diff --git a/arch/cris/include/asm/dma-mapping.h b/arch/cris/include/asm/dma-mapping.h
index 57f794ee6039..5a370178a0e9 100644
--- a/arch/cris/include/asm/dma-mapping.h
+++ b/arch/cris/include/asm/dma-mapping.h
@@ -1,156 +1,20 @@
-/* DMA mapping. Nothing tricky here, just virt_to_phys */
-
 #ifndef _ASM_CRIS_DMA_MAPPING_H
 #define _ASM_CRIS_DMA_MAPPING_H
 
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/scatterlist.h>
-
-#include <asm/cache.h>
-#include <asm/io.h>
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
 #ifdef CONFIG_PCI
-#include <asm-generic/dma-coherent.h>
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t flag);
+extern struct dma_map_ops v32_dma_ops;
 
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle);
-#else
-static inline void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-                   gfp_t flag)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-        BUG();
-        return NULL;
+	return &v32_dma_ops;
 }
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
-                    dma_addr_t dma_handle)
+#else
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-        BUG();
+	BUG();
+	return NULL;
 }
 #endif
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	return virt_to_phys(ptr);
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		 enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction direction)
-{
-	printk("Map sg\n");
-	return nents;
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page, unsigned long offset,
-	     size_t size, enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	return page_to_phys(page) + offset;
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	       enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	     enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-			enum dma_data_direction direction)
-{
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
-			enum dma_data_direction direction)
-{
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction direction)
-{
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
-{
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-		    enum dma_data_direction direction)
-{
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-		    enum dma_data_direction direction)
-{
-}
-
-static inline int
-dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
-        /*
-         * we fall back to GFP_DMA when the mask isn't all 1s,
-         * so we can't guarantee allocations that must be
-         * within a tighter range than GFP_DMA..
-         */
-        if(mask < 0x00ffffff)
-                return 0;
-
-	return 1;
-}
-
-static inline int
-dma_set_mask(struct device *dev, u64 mask)
-{
-	if(!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
-}
 
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
@@ -158,15 +22,4 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 }
 
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
-
 #endif
diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h
index c15b4b4baafa..b1b289df04c7 100644
--- a/arch/cris/include/asm/pci.h
+++ b/arch/cris/include/asm/pci.h
@@ -48,9 +48,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 
 #endif /* __KERNEL__ */
 
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
 /* generic pci stuff */
 #include <asm-generic/pci.h>
 
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index a68b983dcea1..7552c2557506 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -40,6 +40,7 @@ SECTIONS
 	_stext = .;
 	__stext = .;
 	.text : {
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 34aa19352dc1..eefd9a4ed156 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -10,10 +10,12 @@ config FRV
 	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_CPU_DEVICES
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select OLD_SIGSUSPEND3
 	select OLD_SIGACTION
 	select HAVE_DEBUG_STACKOVERFLOW
+	select ARCH_NO_COHERENT_DMA_MMAP
 
 config ZONE_DMA
 	bool
diff --git a/arch/frv/include/asm/checksum.h b/arch/frv/include/asm/checksum.h
index 269da09ff637..b77388c5901d 100644
--- a/arch/frv/include/asm/checksum.h
+++ b/arch/frv/include/asm/checksum.h
@@ -105,8 +105,8 @@ static inline __sum16 csum_fold(__wsum sum)
  * returns a 16-bit checksum, already complemented
  */
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	asm("	addcc		%1,%0,%0,icc0	\n"
 	    "	addxcc		%2,%0,%0,icc0	\n"
@@ -120,8 +120,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
 }
 
 static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len,
+		  __u8 proto, __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
@@ -135,7 +135,7 @@ extern __sum16 ip_compute_csum(const void *buff, int len);
 #define _HAVE_ARCH_IPV6_CSUM
 static inline __sum16
 csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
+		__u32 len, __u8 proto, __wsum sum)
 {
 	unsigned long tmp, tmp2;
 
diff --git a/arch/frv/include/asm/cmpxchg.h b/arch/frv/include/asm/cmpxchg.h
index 5b04dd0aecab..a899765102ea 100644
--- a/arch/frv/include/asm/cmpxchg.h
+++ b/arch/frv/include/asm/cmpxchg.h
@@ -69,8 +69,6 @@ extern uint32_t __xchg_32(uint32_t i, volatile void *v);
 
 #endif
 
-#define tas(ptr) (xchg((ptr), 1))
-
 /*****************************************************************************/
 /*
  * compare and conditionally exchange value with memory
diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h
index 2840adcd6d92..9a82bfa4303b 100644
--- a/arch/frv/include/asm/dma-mapping.h
+++ b/arch/frv/include/asm/dma-mapping.h
@@ -1,128 +1,17 @@
 #ifndef _ASM_DMA_MAPPING_H
 #define _ASM_DMA_MAPPING_H
 
-#include <linux/device.h>
-#include <linux/scatterlist.h>
 #include <asm/cache.h>
 #include <asm/cacheflush.h>
-#include <asm/io.h>
-
-/*
- * See Documentation/DMA-API.txt for the description of how the
- * following DMA API should work.
- */
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
 extern unsigned long __nongprelbss dma_coherent_mem_start;
 extern unsigned long __nongprelbss dma_coherent_mem_end;
 
-void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
-void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
-
-extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-				 enum dma_data_direction direction);
-
-static inline
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		      enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
-
-static inline
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	     enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-extern
-dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
-			size_t size, enum dma_data_direction direction);
-
-static inline
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-		    enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-
-static inline
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-			     enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
-				enum dma_data_direction direction)
-{
-	flush_write_buffers();
-}
-
-static inline
-void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-				   unsigned long offset, size_t size,
-				   enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	flush_write_buffers();
-}
-
-static inline
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-			 enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-			    enum dma_data_direction direction)
-{
-	flush_write_buffers();
-}
-
-static inline
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline
-int dma_supported(struct device *dev, u64 mask)
-{
-        /*
-         * we fall back to GFP_DMA when the mask isn't all 1s,
-         * so we can't guarantee allocations that must be
-         * within a tighter range than GFP_DMA..
-         */
-        if (mask < 0x00ffffff)
-                return 0;
-
-	return 1;
-}
+extern struct dma_map_ops frv_dma_ops;
 
-static inline
-int dma_set_mask(struct device *dev, u64 mask)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
+	return &frv_dma_ops;
 }
 
 static inline
@@ -132,19 +21,4 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	flush_write_buffers();
 }
 
-/* Not supported for now */
-static inline int dma_mmap_coherent(struct device *dev,
-				    struct vm_area_struct *vma, void *cpu_addr,
-				    dma_addr_t dma_addr, size_t size)
-{
-	return -EINVAL;
-}
-
-static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size)
-{
-	return -EINVAL;
-}
-
 #endif  /* _ASM_DMA_MAPPING_H */
diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h
index b3adc93611f3..1f58938703ab 100644
--- a/arch/frv/include/asm/highmem.h
+++ b/arch/frv/include/asm/highmem.h
@@ -62,8 +62,6 @@ extern void kunmap_high(struct page *page);
 extern void *kmap(struct page *page);
 extern void kunmap(struct page *page);
 
-extern struct page *kmap_atomic_to_page(void *ptr);
-
 #endif /* !__ASSEMBLY__ */
 
 /*
diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h
index 70dfbea8c8d7..8062fc73fad0 100644
--- a/arch/frv/include/asm/io.h
+++ b/arch/frv/include/asm/io.h
@@ -43,9 +43,20 @@ static inline unsigned long _swapl(unsigned long v)
 //#define __iormb() asm volatile("membar")
 //#define __iowmb() asm volatile("membar")
 
-#define __raw_readb __builtin_read8
-#define __raw_readw __builtin_read16
-#define __raw_readl __builtin_read32
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return __builtin_read8((volatile void __iomem *)addr);
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return __builtin_read16((volatile void __iomem *)addr);
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return __builtin_read32((volatile void __iomem *)addr);
+}
 
 #define __raw_writeb(datum, addr) __builtin_write8(addr, datum)
 #define __raw_writew(datum, addr) __builtin_write16(addr, datum)
diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h
index 8c97068ac8fc..ec5eebce4fb3 100644
--- a/arch/frv/include/asm/page.h
+++ b/arch/frv/include/asm/page.h
@@ -8,9 +8,6 @@
 
 #ifndef __ASSEMBLY__
 
-#define get_user_page(vaddr)			__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)		free_page(addr)
-
 #define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
 #define copy_page(to,from)			memcpy((to), (from), PAGE_SIZE)
 
@@ -34,7 +31,7 @@ typedef struct page *pgtable_t;
 #define pgprot_val(x)	((x).pgprot)
 
 #define __pte(x)	((pte_t) { (x) } )
-#define __pmd(x)	((pmd_t) { (x) } )
+#define __pmd(x)	((pmd_t) { { (x) } } )
 #define __pud(x)	((pud_t) { (x) } )
 #define __pgd(x)	((pgd_t) { (x) } )
 #define __pgprot(x)	((pgprot_t) { (x) } )
diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h
index e43d22c58ad5..809cfc6707ab 100644
--- a/arch/frv/include/asm/pci.h
+++ b/arch/frv/include/asm/pci.h
@@ -15,7 +15,6 @@
 
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
-#include <asm-generic/pci-dma-compat.h>
 #include <asm-generic/pci.h>
 
 struct pci_dev;
@@ -32,12 +31,6 @@ extern void consistent_sync_page(struct page *page, unsigned long offset,
 				 size_t size, int direction);
 #endif
 
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-				  dma_addr_t *dma_handle);
-
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-				void *vaddr, dma_addr_t dma_handle);
-
 /* Return the index of the PCI controller for device PDEV. */
 #define pci_controller_num(PDEV)	(0)
 
diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h
index dbb825998689..bce0d0d07e60 100644
--- a/arch/frv/include/asm/serial.h
+++ b/arch/frv/include/asm/serial.h
@@ -13,6 +13,6 @@
  */
 #define BASE_BAUD 0
 
-#define STD_COM_FLAGS		ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS		UPF_BOOT_AUTOCONF
 
 #define SERIAL_PORT_DFNS
diff --git a/arch/frv/include/uapi/asm/socket.h b/arch/frv/include/uapi/asm/socket.h
index 4823ad125578..afbc98f02d27 100644
--- a/arch/frv/include/uapi/asm/socket.h
+++ b/arch/frv/include/uapi/asm/socket.h
@@ -85,5 +85,10 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 8eeea0d77aad..082be49b5df0 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -34,7 +34,8 @@ struct dma_alloc_record {
 static DEFINE_SPINLOCK(dma_alloc_lock);
 static LIST_HEAD(dma_alloc_list);
 
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
+static void *frv_dma_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle,
+		gfp_t gfp, struct dma_attrs *attrs)
 {
 	struct dma_alloc_record *new;
 	struct list_head *this = &dma_alloc_list;
@@ -84,9 +85,8 @@ void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_hand
 	return NULL;
 }
 
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+static void frv_dma_free(struct device *hwdev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	struct dma_alloc_record *rec;
 	unsigned long flags;
@@ -105,22 +105,9 @@ void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_
 	BUG();
 }
 
-EXPORT_SYMBOL(dma_free_coherent);
-
-dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-			  enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
-
-	return virt_to_bus(ptr);
-}
-
-EXPORT_SYMBOL(dma_map_single);
-
-int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
-	       enum dma_data_direction direction)
+static int frv_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 	struct scatterlist *sg;
@@ -135,14 +122,49 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	return nents;
 }
 
-EXPORT_SYMBOL(dma_map_sg);
-
-dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
-			size_t size, enum dma_data_direction direction)
+static dma_addr_t frv_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	BUG_ON(direction == DMA_NONE);
 	flush_dcache_page(page);
 	return (dma_addr_t) page_to_phys(page) + offset;
 }
 
-EXPORT_SYMBOL(dma_map_page);
+static void frv_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static void frv_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sg, int nelems,
+		enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+
+static int frv_dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s,
+         * so we can't guarantee allocations that must be
+         * within a tighter range than GFP_DMA..
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+	return 1;
+}
+
+struct dma_map_ops frv_dma_ops = {
+	.alloc			= frv_dma_alloc,
+	.free			= frv_dma_free,
+	.map_page		= frv_dma_map_page,
+	.map_sg			= frv_dma_map_sg,
+	.sync_single_for_device	= frv_dma_sync_single_for_device,
+	.sync_sg_for_device	= frv_dma_sync_sg_for_device,
+	.dma_supported		= frv_dma_supported,
+};
+EXPORT_SYMBOL(frv_dma_ops);
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 4d1f01dc46e5..316b7b65348d 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -18,7 +18,9 @@
 #include <linux/scatterlist.h>
 #include <asm/io.h>
 
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
+static void *frv_dma_alloc(struct device *hwdev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp,
+		struct dma_attrs *attrs)
 {
 	void *ret;
 
@@ -29,29 +31,15 @@ void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_hand
 	return ret;
 }
 
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle)
+static void frv_dma_free(struct device *hwdev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	consistent_free(vaddr);
 }
 
-EXPORT_SYMBOL(dma_free_coherent);
-
-dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-			  enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size);
-
-	return virt_to_bus(ptr);
-}
-
-EXPORT_SYMBOL(dma_map_single);
-
-int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
-	       enum dma_data_direction direction)
+static int frv_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	unsigned long dampr2;
 	void *vaddr;
@@ -79,14 +67,48 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	return nents;
 }
 
-EXPORT_SYMBOL(dma_map_sg);
-
-dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
-			size_t size, enum dma_data_direction direction)
+static dma_addr_t frv_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction direction, struct dma_attrs *attrs)
 {
-	BUG_ON(direction == DMA_NONE);
 	flush_dcache_page(page);
 	return (dma_addr_t) page_to_phys(page) + offset;
 }
 
-EXPORT_SYMBOL(dma_map_page);
+static void frv_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+static void frv_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sg, int nelems,
+		enum dma_data_direction direction)
+{
+	flush_write_buffers();
+}
+
+
+static int frv_dma_supported(struct device *dev, u64 mask)
+{
+        /*
+         * we fall back to GFP_DMA when the mask isn't all 1s,
+         * so we can't guarantee allocations that must be
+         * within a tighter range than GFP_DMA..
+         */
+        if (mask < 0x00ffffff)
+                return 0;
+	return 1;
+}
+
+struct dma_map_ops frv_dma_ops = {
+	.alloc			= frv_dma_alloc,
+	.free			= frv_dma_free,
+	.map_page		= frv_dma_map_page,
+	.map_sg			= frv_dma_map_sg,
+	.sync_single_for_device	= frv_dma_sync_single_for_device,
+	.sync_sg_for_device	= frv_dma_sync_sg_for_device,
+	.dma_supported		= frv_dma_supported,
+};
+EXPORT_SYMBOL(frv_dma_ops);
diff --git a/arch/frv/mm/highmem.c b/arch/frv/mm/highmem.c
index 785344bbdc07..45750fb65c49 100644
--- a/arch/frv/mm/highmem.c
+++ b/arch/frv/mm/highmem.c
@@ -32,11 +32,6 @@ void kunmap(struct page *page)
 
 EXPORT_SYMBOL(kunmap);
 
-struct page *kmap_atomic_to_page(void *ptr)
-{
-	return virt_to_page(ptr);
-}
-
 void *kmap_atomic(struct page *page)
 {
 	unsigned long paddr;
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index db589167838c..986ea84caaed 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -15,7 +15,11 @@ config H8300
 	select OF_IRQ
 	select OF_EARLY_FLATTREE
 	select HAVE_MEMBLOCK
-	select HAVE_DMA_ATTRS
+	select CLKSRC_OF
+	select H8300_TMR8
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZO
+	select HAVE_ARCH_KGDB
 
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
index 0d2d96e52d9f..e1c02ca230cb 100644
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@@ -22,7 +22,9 @@ KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
 KBUILD_AFLAGS += $(aflags-y)
 LDFLAGS += $(ldflags-y)
 
+ifeq ($(CROSS_COMPILE),)
 CROSS_COMPILE := h8300-unknown-linux-
+endif
 
 core-y	+= arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/
 ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
diff --git a/arch/h8300/boot/compressed/Makefile b/arch/h8300/boot/compressed/Makefile
index 87d03b7ee97e..7643633f1330 100644
--- a/arch/h8300/boot/compressed/Makefile
+++ b/arch/h8300/boot/compressed/Makefile
@@ -14,11 +14,12 @@ OBJECTS = $(obj)/head.o $(obj)/misc.o
 # in order to suppress error message.
 #
 CONFIG_MEMORY_START     ?= 0x00400000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00140000
+CONFIG_BOOT_LINK_OFFSET ?= 0x00280000
 IMAGE_OFFSET := $(shell printf "0x%08x" $$(($(CONFIG_MEMORY_START)+$(CONFIG_BOOT_LINK_OFFSET))))
 
 LIBGCC := $(shell $(CROSS-COMPILE)$(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup $(obj)/vmlinux.lds
+LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -estartup -T $(obj)/vmlinux.lds \
+	--defsym output=$(CONFIG_MEMORY_START)
 
 $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
 	$(call if_changed,ld)
@@ -27,11 +28,16 @@ $(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
+suffix-$(CONFIG_KERNEL_GZIP)    := gzip
+suffix-$(CONFIG_KERNEL_LZO)     := lzo
+
+$(obj)/vmlinux.bin.$(suffix-y): $(obj)/vmlinux.bin FORCE
+	$(call if_changed,$(suffix-y))
 
 LDFLAGS_piggy.o := -r --format binary --oformat elf32-h8300-linux -T
 OBJCOPYFLAGS := -O binary
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
 	$(call if_changed,ld)
+
+CFLAGS_misc.o = -O0
diff --git a/arch/h8300/boot/compressed/head.S b/arch/h8300/boot/compressed/head.S
index 74c0d8cc40ba..0436350c1df5 100644
--- a/arch/h8300/boot/compressed/head.S
+++ b/arch/h8300/boot/compressed/head.S
@@ -9,8 +9,8 @@
 	.section	.text..startup,"ax"
 	.global	startup
 startup:
+	mov.l	#startup, sp
 	mov.l	er0, er4
-	mov.l	er0, sp
 	mov.l	#__sbss, er0
 	mov.l	#__ebss, er1
 	sub.l	er0, er1
@@ -24,7 +24,7 @@ startup:
 	bne	1b
 	jsr	@decompress_kernel
 	mov.l	er4, er0
-	jmp	@0x400000
+	jmp	@output
 
 	.align	9
 fake_headers_as_bzImage:
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
index c4f2cfcb117b..9f64fe8f29ff 100644
--- a/arch/h8300/boot/compressed/misc.c
+++ b/arch/h8300/boot/compressed/misc.c
@@ -28,11 +28,17 @@ static unsigned long free_mem_end_ptr;
 
 extern char input_data[];
 extern int input_len;
-static unsigned char *output;
+extern char output[];
 
 #define HEAP_SIZE             0x10000
 
+#ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
+#endif
+
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
 
 void *memset(void *s, int c, size_t n)
 {
@@ -56,15 +62,10 @@ void *memcpy(void *dest, const void *src, size_t n)
 
 static void error(char *x)
 {
-
 	while (1)
 		;	/* Halt */
 }
 
-#define STACK_SIZE (4096)
-long user_stack[STACK_SIZE];
-long *stack_start = &user_stack[STACK_SIZE];
-
 void decompress_kernel(void)
 {
 	free_mem_ptr = (unsigned long)&_end;
diff --git a/arch/h8300/boot/compressed/vmlinux.lds b/arch/h8300/boot/compressed/vmlinux.lds
index a0a3a0ed54ef..ad848a72fd3f 100644
--- a/arch/h8300/boot/compressed/vmlinux.lds
+++ b/arch/h8300/boot/compressed/vmlinux.lds
@@ -13,20 +13,22 @@ SECTIONS
 	{
 		*(.rodata)
 	}
+        . = ALIGN(0x4) ;
         .data :
 
         {
+        . = ALIGN(0x4) ;
         __sdata = . ;
         ___data_start = . ;
                 *(.data.*)
 	}
+        . = ALIGN(0x4) ;
         .bss :
         {
-        . = ALIGN(0x4) ;
         __sbss = . ;
                 *(.bss*)
         . = ALIGN(0x4) ;
         __ebss = . ;
-        __end = . ;
         }
+        _end = . ;
 }
diff --git a/arch/h8300/boot/dts/edosk2674.dts b/arch/h8300/boot/dts/edosk2674.dts
index dfb5c102f8da..6ae884bf66a5 100644
--- a/arch/h8300/boot/dts/edosk2674.dts
+++ b/arch/h8300/boot/dts/edosk2674.dts
@@ -7,7 +7,7 @@
 
 	chosen {
 		bootargs = "console=ttySC2,38400";
-		stdout-path = <&sci2>;
+		stdout-path = &sci2;
 	};
 	aliases {
 		serial0 = &sci0;
@@ -25,13 +25,13 @@
 		compatible = "renesas,h8s2678-pll-clock";
 		clocks = <&xclk>;
 		#clock-cells = <0>;
-		reg = <0xfee03b 2>, <0xfee045 2>;
+		reg = <0xffff3b 1>, <0xffff45 1>;
 	};
 	core_clk: core_clk {
 		compatible = "renesas,h8300-div-clock";
 		clocks = <&pllclk>;
 		#clock-cells = <0>;
-		reg = <0xfee03b 2>;
+		reg = <0xffff3b 1>;
 		renesas,width = <3>;
 	};
 	fclk: fclk {
@@ -88,20 +88,20 @@
 		reg = <0xffff78 8>;
 		interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
 		clocks = <&fclk>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 	};
 	sci1: serial@ffff80 {
 		compatible = "renesas,sci";
 		reg = <0xffff80 8>;
 		interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
 		clocks = <&fclk>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 	};
 	sci2: serial@ffff88 {
 		compatible = "renesas,sci";
 		reg = <0xffff88 8>;
 		interrupts = <96 0>, <97 0>, <98 0>, <99 0>;
 		clocks = <&fclk>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 	};
 };
diff --git a/arch/h8300/boot/dts/h8300h_sim.dts b/arch/h8300/boot/dts/h8300h_sim.dts
index 545bfb57af9a..9c733d920f1f 100644
--- a/arch/h8300/boot/dts/h8300h_sim.dts
+++ b/arch/h8300/boot/dts/h8300h_sim.dts
@@ -83,7 +83,7 @@
 		reg = <0xffffb0 8>;
 		interrupts = <52 0>, <53 0>, <54 0>, <55 0>;
 		clocks = <&fclk>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 	};
 
 	sci1: serial@ffffb8 {
@@ -91,6 +91,6 @@
 		reg = <0xffffb8 8>;
 		interrupts = <56 0>, <57 0>, <58 0>, <59 0>;
 		clocks = <&fclk>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 	};
 };
diff --git a/arch/h8300/boot/dts/h8s_sim.dts b/arch/h8300/boot/dts/h8s_sim.dts
index bcedba5a3ce7..97e1f4b17ef0 100644
--- a/arch/h8300/boot/dts/h8s_sim.dts
+++ b/arch/h8300/boot/dts/h8s_sim.dts
@@ -87,13 +87,13 @@
 		reg = <0xffff78 8>;
 		interrupts = <88 0>, <89 0>, <90 0>, <91 0>;
 		clocks = <&fclk>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 	};
 	sci1: serial@ffff80 {
 		compatible = "renesas,sci";
 		reg = <0xffff80 8>;
 		interrupts = <92 0>, <93 0>, <94 0>, <95 0>;
 		clocks = <&fclk>;
-		clock-names = "sci_ick";
+		clock-names = "fck";
 	};
 };
diff --git a/arch/h8300/configs/h8300h-sim_defconfig b/arch/h8300/configs/h8300h-sim_defconfig
index 067bfe9c49b3..80624f46b0ed 100644
--- a/arch/h8300/configs/h8300h-sim_defconfig
+++ b/arch/h8300/configs/h8300h-sim_defconfig
@@ -34,7 +34,7 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_SH_SCI_EARLYCON=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
diff --git a/arch/h8300/include/asm/dma-mapping.h b/arch/h8300/include/asm/dma-mapping.h
index d9b5b806afe6..7ac7fadffed0 100644
--- a/arch/h8300/include/asm/dma-mapping.h
+++ b/arch/h8300/include/asm/dma-mapping.h
@@ -8,6 +8,4 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 	return &h8300_dma_map_ops;
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 #endif
diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h
index 1d09b2f2e0fe..2e221c5f0203 100644
--- a/arch/h8300/include/asm/io.h
+++ b/arch/h8300/include/asm/io.h
@@ -3,55 +3,62 @@
 
 #ifdef __KERNEL__
 
-#include <asm-generic/io.h>
-
 /* H8/300 internal I/O functions */
-static inline unsigned char ctrl_inb(unsigned long addr)
+
+#define __raw_readb __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
 {
-	return *(volatile unsigned char *)addr;
+	return *(volatile u8 *)addr;
 }
 
-static inline unsigned short ctrl_inw(unsigned long addr)
+#define __raw_readw __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
 {
-	return *(volatile unsigned short *)addr;
+	return *(volatile u16 *)addr;
 }
 
-static inline unsigned long ctrl_inl(unsigned long addr)
+#define __raw_readl __raw_readl
+static inline u32  __raw_readl(const volatile void __iomem *addr)
 {
-	return *(volatile unsigned long *)addr;
+	return *(volatile u32 *)addr;
 }
 
-static inline void ctrl_outb(unsigned char b, unsigned long addr)
+#define __raw_writeb __raw_writeb
+static inline void __raw_writeb(u8 b, const volatile void __iomem *addr)
 {
-	*(volatile unsigned char *)addr = b;
+	*(volatile u8 *)addr = b;
 }
 
-static inline void ctrl_outw(unsigned short b, unsigned long addr)
+#define __raw_writew __raw_writew
+static inline void __raw_writew(u16 b, const volatile void __iomem *addr)
 {
-	*(volatile unsigned short *)addr = b;
+	*(volatile u16 *)addr = b;
 }
 
-static inline void ctrl_outl(unsigned long b, unsigned long addr)
+#define __raw_writel __raw_writel
+static inline void __raw_writel(u32 b, const volatile void __iomem *addr)
 {
-	*(volatile unsigned long *)addr = b;
+	*(volatile u32 *)addr = b;
 }
 
-static inline void ctrl_bclr(int b, unsigned long addr)
+static inline void ctrl_bclr(int b, void __iomem *addr)
 {
 	if (__builtin_constant_p(b))
-		__asm__("bclr %1,%0" : : "WU"(addr), "i"(b));
+		__asm__("bclr %1,%0" : "+WU"(*(u8 *)addr): "i"(b));
 	else
-		__asm__("bclr %w1,%0" : : "WU"(addr), "r"(b));
+		__asm__("bclr %w1,%0" : "+WU"(*(u8 *)addr): "r"(b));
 }
 
-static inline void ctrl_bset(int b, unsigned long addr)
+static inline void ctrl_bset(int b, void __iomem *addr)
 {
 	if (__builtin_constant_p(b))
-		__asm__("bset %1,%0" : : "WU"(addr), "i"(b));
+		__asm__("bset %1,%0" : "+WU"(*(u8 *)addr): "i"(b));
 	else
-		__asm__("bset %w1,%0" : : "WU"(addr), "r"(b));
+		__asm__("bset %w1,%0" : "+WU"(*(u8 *)addr): "r"(b));
 }
 
+#include <asm-generic/io.h>
+
 #endif /* __KERNEL__ */
 
 #endif /* _H8300_IO_H */
diff --git a/arch/h8300/include/asm/kgdb.h b/arch/h8300/include/asm/kgdb.h
new file mode 100644
index 000000000000..726ff8fdfc18
--- /dev/null
+++ b/arch/h8300/include/asm/kgdb.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_H8300_KGDB_H
+#define _ASM_H8300_KGDB_H
+
+#define CACHE_FLUSH_IS_SAFE	1
+#define BUFMAX			2048
+
+enum regnames {
+	GDB_ER0, GDB_ER1, GDB_ER2, GDB_ER3,
+	GDB_ER4, GDB_ER5, GDB_ER6, GDB_SP,
+	GDB_CCR, GDB_PC,
+	GDB_CYCLLE,
+#if defined(CONFIG_CPU_H8S)
+	GDB_EXR,
+#endif
+	GDB_TICK, GDB_INST,
+#if defined(CONFIG_CPU_H8S)
+	GDB_MACH, GDB_MACL,
+#endif
+	/* do not change the last entry or anything below! */
+	GDB_NUMREGBYTES,		/* number of registers */
+};
+
+#define GDB_SIZEOF_REG		sizeof(u32)
+#if defined(CONFIG_CPU_H8300H)
+#define DBG_MAX_REG_NUM		(13)
+#elif defined(CONFIG_CPU_H8S)
+#define DBG_MAX_REG_NUM		(14)
+#endif
+#define NUMREGBYTES		(DBG_MAX_REG_NUM * GDB_SIZEOF_REG)
+
+#define BREAK_INSTR_SIZE	2
+static inline void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__("trapa #2");
+}
+
+#endif /* _ASM_H8300_KGDB_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 544c30785ad4..b408fe660cf8 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -13,6 +13,12 @@
 
 #ifdef __KERNEL__
 
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192	/* 2 pages */
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -46,14 +52,6 @@ struct thread_info {
 #define init_thread_info	(init_thread_union.thread_info)
 #define init_stack		(init_thread_union.stack)
 
-
-/*
- * Size of kernel stack for each process. This must be a power of 2...
- */
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		8192	/* 2 pages */
-
-
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
 {
diff --git a/arch/h8300/include/asm/traps.h b/arch/h8300/include/asm/traps.h
index aa34e75fd767..15e701130b27 100644
--- a/arch/h8300/include/asm/traps.h
+++ b/arch/h8300/include/asm/traps.h
@@ -36,6 +36,6 @@ extern unsigned long *_interrupt_redirect_table;
 extern char _start, _etext;
 #define check_kernel_text(addr) \
 	((addr >= (unsigned long)(&_start)) && \
-	 (addr <  (unsigned long)(&_etext)))
+	 (addr <  (unsigned long)(&_etext)) && !(addr & 1))
 
 #endif /* _H8300_TRAPS_H */
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
index 5bc33f2fcc08..253f8e322ecc 100644
--- a/arch/h8300/kernel/Makefile
+++ b/arch/h8300/kernel/Makefile
@@ -17,3 +17,5 @@ obj-$(CONFIG_H8S_SIM) += sim-console.o
 
 obj-$(CONFIG_CPU_H8300H) += ptrace_h.o
 obj-$(CONFIG_CPU_H8S) += ptrace_s.o
+
+obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/h8300/kernel/entry.S b/arch/h8300/kernel/entry.S
index 797dfa8ddeb2..4f67d4b350d5 100644
--- a/arch/h8300/kernel/entry.S
+++ b/arch/h8300/kernel/entry.S
@@ -188,7 +188,11 @@ _interrupt_redirect_table:
 	jsr	@_interrupt_entry		/* NMI */
 	jmp	@_system_call			/* TRAPA #0 (System call) */
 	.long	0
+#if defined(CONFIG_KGDB)
+	jmp	@_kgdb_trap
+#else
 	.long	0
+#endif
 	jmp	@_trace_break			/* TRAPA #3 (breakpoint) */
 	.rept	INTERRUPTS-12
 	jsr	@_interrupt_entry
@@ -242,6 +246,7 @@ _system_call:
 	/* save top of frame */
 	mov.l	sp,er0
 	jsr	@set_esp0
+	andc	#0x3f,ccr
 	mov.l	sp,er2
 	and.w	#0xe000,r2
 	mov.l	@(TI_FLAGS:16,er2),er2
@@ -405,6 +410,20 @@ _nmi:
 	mov.l	@sp+, er0
 	jmp	@_interrupt_entry
 
+#if defined(CONFIG_KGDB)
+_kgdb_trap:
+	subs	#4,sp
+	SAVE_ALL
+	mov.l	sp,er0
+	add.l	#LRET,er0
+	mov.l	er0,@(LSP,sp)
+	jsr	@set_esp0
+	mov.l	sp,er0
+	subs	#4,er0
+	jsr	@h8300_kgdb_trap
+	jmp	@ret_from_exception
+#endif
+
 	.section	.bss
 _sw_ksp:
 	.space	4
diff --git a/arch/h8300/kernel/kgdb.c b/arch/h8300/kernel/kgdb.c
new file mode 100644
index 000000000000..602e478afbd5
--- /dev/null
+++ b/arch/h8300/kernel/kgdb.c
@@ -0,0 +1,135 @@
+/*
+ * H8/300 KGDB support
+ *
+ * Copyright (C) 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/io.h>
+
+struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = {
+	{ "er0", GDB_SIZEOF_REG, offsetof(struct pt_regs, er0) },
+	{ "er1", GDB_SIZEOF_REG, offsetof(struct pt_regs, er1) },
+	{ "er2", GDB_SIZEOF_REG, offsetof(struct pt_regs, er2) },
+	{ "er3", GDB_SIZEOF_REG, offsetof(struct pt_regs, er3) },
+	{ "er4", GDB_SIZEOF_REG, offsetof(struct pt_regs, er4) },
+	{ "er5", GDB_SIZEOF_REG, offsetof(struct pt_regs, er5) },
+	{ "er6", GDB_SIZEOF_REG, offsetof(struct pt_regs, er6) },
+	{ "sp", GDB_SIZEOF_REG, offsetof(struct pt_regs, sp) },
+	{ "ccr", GDB_SIZEOF_REG, offsetof(struct pt_regs, ccr) },
+	{ "pc", GDB_SIZEOF_REG, offsetof(struct pt_regs, pc) },
+	{ "cycles", GDB_SIZEOF_REG, -1 },
+#if defined(CONFIG_CPU_H8S)
+	{ "exr", GDB_SIZEOF_REG, offsetof(struct pt_regs, exr) },
+#endif
+	{ "tick", GDB_SIZEOF_REG, -1 },
+	{ "inst", GDB_SIZEOF_REG, -1 },
+};
+
+char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return NULL;
+
+	switch (regno) {
+	case GDB_CCR:
+#if defined(CONFIG_CPU_H8S)
+	case GDB_EXR:
+#endif
+		*(u32 *)mem = *(u16 *)((void *)regs +
+				       dbg_reg_def[regno].offset);
+		break;
+	default:
+		if (dbg_reg_def[regno].offset >= 0)
+			memcpy(mem, (void *)regs + dbg_reg_def[regno].offset,
+			       dbg_reg_def[regno].size);
+		else
+			memset(mem, 0, dbg_reg_def[regno].size);
+		break;
+	}
+	return dbg_reg_def[regno].name;
+}
+
+int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
+{
+	if (regno >= DBG_MAX_REG_NUM || regno < 0)
+		return -EINVAL;
+
+	switch (regno) {
+	case GDB_CCR:
+#if defined(CONFIG_CPU_H8S)
+	case GDB_EXR:
+#endif
+		*(u16 *)((void *)regs +
+			 dbg_reg_def[regno].offset) = *(u32 *)mem;
+		break;
+	default:
+		memcpy((void *)regs + dbg_reg_def[regno].offset, mem,
+		       dbg_reg_def[regno].size);
+	}
+	return 0;
+}
+
+asmlinkage void h8300_kgdb_trap(struct pt_regs *regs)
+{
+	regs->pc &= 0x00ffffff;
+	if (kgdb_handle_exception(10, SIGTRAP, 0, regs))
+		return;
+	if (*(u16 *)(regs->pc) == *(u16 *)&arch_kgdb_ops.gdb_bpt_instr)
+		regs->pc += BREAK_INSTR_SIZE;
+	regs->pc |= regs->ccr << 24;
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	memset((char *)gdb_regs, 0, NUMREGBYTES);
+	gdb_regs[GDB_SP] = p->thread.ksp;
+	gdb_regs[GDB_PC] = KSTK_EIP(p);
+}
+
+void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)
+{
+	regs->pc = pc;
+}
+
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+				char *remcom_in_buffer, char *remcom_out_buffer,
+				struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long addr;
+
+	switch (remcom_in_buffer[0]) {
+	case 's':
+	case 'c':
+		/* handle the optional parameters */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			regs->pc = addr;
+
+		return 0;
+	}
+
+	return -1; /* this means that we do not want to exit from the handler */
+}
+
+int kgdb_arch_init(void)
+{
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	/* Nothing to do */
+}
+
+const struct kgdb_arch arch_kgdb_ops = {
+	/* Breakpoint instruction: trapa #2 */
+	.gdb_bpt_instr = { 0x57, 0x20 },
+};
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index 0fd1fe65c0b8..c8c25a4e9e48 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -20,8 +20,6 @@
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
@@ -29,6 +27,7 @@
 #include <linux/clk-provider.h>
 #include <linux/memblock.h>
 #include <linux/screen_info.h>
+#include <linux/clocksource.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -136,11 +135,6 @@ void __init setup_arch(char **cmdline_p)
 	parse_early_param();
 
 	bootmem_init();
-#if defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)
-	sim_console_register();
-#endif
-
-	early_platform_driver_probe("earlyprintk", 1, 0);
 	/*
 	 * get kmalloc into gear
 	 */
@@ -206,14 +200,14 @@ device_initcall(device_probe);
 #define get_wait(base, addr) ({		\
 	int baddr;			\
 	baddr = ((addr) / 0x200000 * 2);			     \
-	w *= (ctrl_inw((unsigned long)(base) + 2) & (3 << baddr)) + 1;	\
+	w *= (readw((base) + 2) & (3 << baddr)) + 1;		     \
 	})
 #endif
 #if defined(CONFIG_CPU_H8S)
 #define get_wait(base, addr) ({		\
 	int baddr;			\
 	baddr = ((addr) / 0x200000 * 16);			     \
-	w *= (ctrl_inl((unsigned long)(base) + 2) & (7 << baddr)) + 1;	\
+	w *= (readl((base) + 2) & (7 << baddr)) + 1;	\
 	})
 #endif
 
@@ -227,8 +221,8 @@ static __init int access_timing(void)
 
 	bsc = of_find_compatible_node(NULL, NULL, "renesas,h8300-bsc");
 	base = of_iomap(bsc, 0);
-	w = (ctrl_inb((unsigned long)base + 0) & bit)?2:1;
-	if (ctrl_inb((unsigned long)base + 1) & bit)
+	w = (readb(base + 0) & bit)?2:1;
+	if (readb(base + 1) & bit)
 		w *= get_wait(base, addr);
 	else
 		w *= 2;
@@ -252,4 +246,5 @@ void __init calibrate_delay(void)
 void __init time_init(void)
 {
 	of_clk_init(NULL);
+	clocksource_probe();
 }
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index 380fffd081b2..ad1f81f574e5 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -95,7 +95,7 @@ restore_sigcontext(struct sigcontext *usc, int *pd0)
 	regs->ccr |= ccr;
 	regs->orig_er0 = -1;		/* disable syscall checks */
 	err |= __get_user(usp, &usc->sc_usp);
-	wrusp(usp);
+	regs->sp = usp;
 
 	err |= __get_user(er0, &usc->sc_er0);
 	*pd0 = er0;
@@ -180,7 +180,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 		return -EFAULT;
 
 	/* Set up to return from userspace.  */
-	ret = frame->retcode;
+	ret = (unsigned char *)&frame->retcode;
 	if (ksig->ka.sa.sa_flags & SA_RESTORER)
 		ret = (unsigned char *)(ksig->ka.sa.sa_restorer);
 	else {
@@ -196,8 +196,8 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 		return -EFAULT;
 
 	/* Set up registers for signal handler */
-	wrusp((unsigned long) frame);
-	regs->pc  = (unsigned long) ksig->ka.sa.sa_handler;
+	regs->sp  = (unsigned long)frame;
+	regs->pc  = (unsigned long)ksig->ka.sa.sa_handler;
 	regs->er0 = ksig->sig;
 	regs->er1 = (unsigned long)&(frame->info);
 	regs->er2 = (unsigned long)&frame->uc;
diff --git a/arch/h8300/kernel/sim-console.c b/arch/h8300/kernel/sim-console.c
index a15edf0565d9..46138f55a9ea 100644
--- a/arch/h8300/kernel/sim-console.c
+++ b/arch/h8300/kernel/sim-console.c
@@ -1,79 +1,30 @@
 /*
- * arch/h8300/kernel/early_printk.c
+ * arch/h8300/kernel/sim-console.c
  *
- *  Copyright (C) 2009 Yoshinori Sato <ysato@users.sourceforge.jp>
+ *  Copyright (C) 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
 #include <linux/console.h>
-#include <linux/tty.h>
 #include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 
-static void sim_write(struct console *co, const char *ptr,
-				 unsigned len)
+static void sim_write(struct console *con, const char *s, unsigned n)
 {
 	register const int fd __asm__("er0") = 1; /* stdout */
-	register const char *_ptr __asm__("er1") = ptr;
-	register const unsigned _len __asm__("er2") = len;
+	register const char *_ptr __asm__("er1") = s;
+	register const unsigned _len __asm__("er2") = n;
 
 	__asm__(".byte 0x5e,0x00,0x00,0xc7\n\t" /* jsr @0xc7 (sys_write) */
 		: : "g"(fd), "g"(_ptr), "g"(_len));
 }
 
-static struct console sim_console = {
-	.name		= "sim_console",
-	.write		= sim_write,
-	.setup		= NULL,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-};
-
-static char sim_console_buf[32];
-
-static int sim_probe(struct platform_device *pdev)
-{
-	if (sim_console.data)
-		return -EEXIST;
-
-	if (!strstr(sim_console_buf, "keep"))
-		sim_console.flags |= CON_BOOT;
-
-	register_console(&sim_console);
-	return 0;
-}
-
-static int sim_remove(struct platform_device *pdev)
+static int __init sim_setup(struct earlycon_device *device, const char *opt)
 {
+	device->con->write = sim_write;
 	return 0;
 }
 
-static struct platform_driver sim_driver = {
-	.probe		= sim_probe,
-	.remove		= sim_remove,
-	.driver		= {
-		.name	= "h8300-sim",
-		.owner	= THIS_MODULE,
-	},
-};
-
-early_platform_init_buffer("earlyprintk", &sim_driver,
-			   sim_console_buf, ARRAY_SIZE(sim_console_buf));
-
-static struct platform_device sim_console_device = {
-	.name		= "h8300-sim",
-	.id		= 0,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&sim_console_device,
-};
-
-void __init sim_console_register(void)
-{
-	early_platform_add_devices(devices,
-				   ARRAY_SIZE(devices));
-}
+EARLYCON_DECLARE(h8sim, sim_setup);
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
index 1b2d7cdd6591..044a36125846 100644
--- a/arch/h8300/kernel/traps.c
+++ b/arch/h8300/kernel/traps.c
@@ -125,17 +125,18 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 
 	pr_info("Stack from %08lx:", (unsigned long)stack);
 	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (((unsigned long)stack & (THREAD_SIZE - 1)) == 0)
+		if (((unsigned long)stack & (THREAD_SIZE - 1)) >=
+		    THREAD_SIZE-4)
 			break;
 		if (i % 8 == 0)
-			pr_info("\n       ");
-		pr_info(" %08lx", *stack++);
+			pr_info(" ");
+		pr_cont(" %08lx", *stack++);
 	}
 
-	pr_info("\nCall Trace:");
+	pr_info("\nCall Trace:\n");
 	i = 0;
 	stack = esp;
-	while (((unsigned long)stack & (THREAD_SIZE - 1)) != 0) {
+	while (((unsigned long)stack & (THREAD_SIZE - 1)) < THREAD_SIZE-4) {
 		addr = *stack++;
 		/*
 		 * If the address is either in the text segment of the
@@ -147,15 +148,10 @@ void show_stack(struct task_struct *task, unsigned long *esp)
 		 */
 		if (check_kernel_text(addr)) {
 			if (i % 4 == 0)
-				pr_info("\n       ");
-			pr_info(" [<%08lx>]", addr);
+				pr_info("       ");
+			pr_cont(" [<%08lx>]", addr);
 			i++;
 		}
 	}
 	pr_info("\n");
 }
-
-void show_trace_task(struct task_struct *tsk)
-{
-	show_stack(tsk, (unsigned long *)tsk->thread.esp0);
-}
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 7c302dcf5249..cb5dfb02c88d 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -1,5 +1,6 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 #define ROMTOP 0x000000
 #define RAMTOP 0x400000
@@ -42,11 +43,10 @@ SECTIONS
 	. = RAMTOP;
 	_ramstart = .;
 #define ADDR(x) ROMEND
-#else
 #endif
 	_sdata = . ;
 	__data_start = . ;
-	RW_DATA_SECTION(0,0,0)
+	RW_DATA_SECTION(0, PAGE_SIZE, THREAD_SIZE)
 #if defined(CONFIG_ROMKERNEL)
 #undef ADDR
 #endif
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 4dc89d1f9c48..57298e7b4867 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -27,7 +27,6 @@ config HEXAGON
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select MODULES_USE_ELF_RELA
 	select GENERIC_CPU_DEVICES
-	select HAVE_DMA_ATTRS
 	---help---
 	  Qualcomm Hexagon is a processor architecture designed for high
 	  performance and low power across a wide variety of applications.
diff --git a/arch/hexagon/include/asm/checksum.h b/arch/hexagon/include/asm/checksum.h
index 46ec8a7fd65f..d9f58d696238 100644
--- a/arch/hexagon/include/asm/checksum.h
+++ b/arch/hexagon/include/asm/checksum.h
@@ -38,12 +38,12 @@ __wsum csum_partial_copy_nocheck(const void *src, void *dst,
  * returns a 16-bit checksum, already complemented
  */
 #define csum_tcpudp_nofold csum_tcpudp_nofold
-__wsum csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
-	unsigned short len, unsigned short proto, __wsum sum);
+__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+			  __u32 len, __u8 proto, __wsum sum);
 
 #define csum_tcpudp_magic csum_tcpudp_magic
-__sum16 csum_tcpudp_magic(unsigned long saddr, unsigned long daddr,
-	unsigned short len, unsigned short proto, __wsum sum);
+__sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+			  __u32 len, __u8 proto, __wsum sum);
 
 #include <asm-generic/checksum.h>
 
diff --git a/arch/hexagon/include/asm/dma-mapping.h b/arch/hexagon/include/asm/dma-mapping.h
index 268fde8a4575..aa6203464520 100644
--- a/arch/hexagon/include/asm/dma-mapping.h
+++ b/arch/hexagon/include/asm/dma-mapping.h
@@ -49,8 +49,6 @@ extern int dma_is_consistent(struct device *dev, dma_addr_t dma_handle);
 extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 			   enum dma_data_direction direction);
 
-#include <asm-generic/dma-mapping-common.h>
-
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
 	if (!dev->dma_mask)
diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c
index ff759f26b96a..983bae7d2665 100644
--- a/arch/hexagon/kernel/smp.c
+++ b/arch/hexagon/kernel/smp.c
@@ -180,7 +180,7 @@ void start_secondary(void)
 
 	local_irq_enable();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 
diff --git a/arch/hexagon/lib/checksum.c b/arch/hexagon/lib/checksum.c
index 8169f78a46a7..617506d1a559 100644
--- a/arch/hexagon/lib/checksum.c
+++ b/arch/hexagon/lib/checksum.c
@@ -60,18 +60,16 @@ static inline unsigned short from64to16(u64 x)
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented.
  */
-__sum16 csum_tcpudp_magic(unsigned long saddr, unsigned long daddr,
-			  unsigned short len, unsigned short proto,
-			  __wsum sum)
+__sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+			  __u32 len, __u8 proto, __wsum sum)
 {
 	return (__force __sum16)~from64to16(
 		(__force u64)saddr + (__force u64)daddr +
 		(__force u64)sum + ((len + proto) << 8));
 }
 
-__wsum csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr,
-			  unsigned short len, unsigned short proto,
-			  __wsum sum)
+__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+			  __u32 len, __u8 proto, __wsum sum)
 {
 	u64 result;
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index eb0249e37981..b534ebab36ea 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -25,7 +25,6 @@ config IA64
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE if (!ITANIUM)
 	select HAVE_FUNCTION_TRACER
-	select HAVE_DMA_ATTRS
 	select TTY
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
@@ -575,12 +574,8 @@ config PCI_DOMAINS
 config PCI_SYSCALL
 	def_bool PCI
 
-source "drivers/pci/pcie/Kconfig"
-
 source "drivers/pci/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
 source "drivers/pcmcia/Kconfig"
 
 endmenu
diff --git a/arch/ia64/include/asm/barrier.h b/arch/ia64/include/asm/barrier.h
index df896a1c41d3..588f1614cafc 100644
--- a/arch/ia64/include/asm/barrier.h
+++ b/arch/ia64/include/asm/barrier.h
@@ -42,34 +42,24 @@
 #define dma_rmb()	mb()
 #define dma_wmb()	mb()
 
-#ifdef CONFIG_SMP
-# define smp_mb()	mb()
-#else
-# define smp_mb()	barrier()
-#endif
+# define __smp_mb()	mb()
 
-#define smp_rmb()	smp_mb()
-#define smp_wmb()	smp_mb()
-
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
-
-#define smp_mb__before_atomic()	barrier()
-#define smp_mb__after_atomic()	barrier()
+#define __smp_mb__before_atomic()	barrier()
+#define __smp_mb__after_atomic()	barrier()
 
 /*
  * IA64 GCC turns volatile stores into st.rel and volatile loads into ld.acq no
  * need for asm trickery!
  */
 
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)						\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
 	barrier();							\
 	WRITE_ONCE(*p, v);						\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
 	typeof(*p) ___p1 = READ_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
@@ -77,12 +67,12 @@ do {									\
 	___p1;								\
 })
 
-#define smp_store_mb(var, value)	do { WRITE_ONCE(var, value); mb(); } while (0)
-
 /*
  * The group barrier in front of the rsm & ssm are necessary to ensure
  * that none of the previous instructions in the same group are
  * affected by the rsm/ssm.
  */
 
+#include <asm-generic/barrier.h>
+
 #endif /* _ASM_IA64_BARRIER_H */
diff --git a/arch/ia64/include/asm/checksum.h b/arch/ia64/include/asm/checksum.h
index 97af155057e4..7accf54162b2 100644
--- a/arch/ia64/include/asm/checksum.h
+++ b/arch/ia64/include/asm/checksum.h
@@ -16,15 +16,11 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
  * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit
  * checksum, already complemented
  */
-extern __sum16 csum_tcpudp_magic (__be32 saddr, __be32 daddr,
-					     unsigned short len,
-					     unsigned short proto,
-					     __wsum sum);
+extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+				 __u32 len, __u8 proto, __wsum sum);
 
-extern __wsum csum_tcpudp_nofold (__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
-					__wsum sum);
+extern __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+				 __u32 len, __u8 proto, __wsum sum);
 
 /*
  * Computes the checksum of a memory block at buff, length len,
@@ -73,7 +69,7 @@ static inline __sum16 csum_fold(__wsum csum)
 #define _HAVE_ARCH_IPV6_CSUM	1
 struct in6_addr;
 extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-	const struct in6_addr *daddr, __u32 len, unsigned short proto,
-	__wsum csum);
+			       const struct in6_addr *daddr,
+			       __u32 len, __u8 proto, __wsum csum);
 
 #endif /* _ASM_IA64_CHECKSUM_H */
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 9beccf8010bd..d472805edfa9 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -25,8 +25,6 @@ extern void machvec_dma_sync_sg(struct device *, struct scatterlist *, int,
 
 #define get_dma_ops(dev) platform_dma_get_ops(dev)
 
-#include <asm-generic/dma-mapping-common.h>
-
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
 	if (!dev->dma_mask)
diff --git a/arch/ia64/include/asm/early_ioremap.h b/arch/ia64/include/asm/early_ioremap.h
new file mode 100644
index 000000000000..eec9e1d1b833
--- /dev/null
+++ b/arch/ia64/include/asm/early_ioremap.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_IA64_EARLY_IOREMAP_H
+#define _ASM_IA64_EARLY_IOREMAP_H
+
+extern void __iomem * early_ioremap (unsigned long phys_addr, unsigned long size);
+#define early_memremap(phys_addr, size)        early_ioremap(phys_addr, size)
+
+extern void early_iounmap (volatile void __iomem *addr, unsigned long size);
+#define early_memunmap(addr, size)             early_iounmap(addr, size)
+
+#endif
diff --git a/arch/ia64/include/asm/gpio.h b/arch/ia64/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/ia64/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
index 9041bbe2b7b4..5de673ac9cb1 100644
--- a/arch/ia64/include/asm/io.h
+++ b/arch/ia64/include/asm/io.h
@@ -20,6 +20,7 @@
  */
 
 #include <asm/unaligned.h>
+#include <asm/early_ioremap.h>
 
 /* We don't use IO slowdowns on the ia64, but.. */
 #define __SLOW_DOWN_IO	do { } while (0)
@@ -427,15 +428,12 @@ __writeq (unsigned long val, volatile void __iomem *addr)
 extern void __iomem * ioremap(unsigned long offset, unsigned long size);
 extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
 extern void iounmap (volatile void __iomem *addr);
-extern void __iomem * early_ioremap (unsigned long phys_addr, unsigned long size);
-#define early_memremap(phys_addr, size)        early_ioremap(phys_addr, size)
-extern void early_iounmap (volatile void __iomem *addr, unsigned long size);
-#define early_memunmap(addr, size)             early_iounmap(addr, size)
 static inline void __iomem * ioremap_cache (unsigned long phys_addr, unsigned long size)
 {
 	return ioremap(phys_addr, size);
 }
 #define ioremap_cache ioremap_cache
+#define ioremap_uc ioremap_nocache
 
 
 /*
diff --git a/arch/ia64/include/asm/page.h b/arch/ia64/include/asm/page.h
index ec48bb9f95e1..e8c486ef0d76 100644
--- a/arch/ia64/include/asm/page.h
+++ b/arch/ia64/include/asm/page.h
@@ -105,6 +105,7 @@ extern struct page *vmem_map;
 #ifdef CONFIG_DISCONTIGMEM
 # define page_to_pfn(page)	((unsigned long) (page - vmem_map))
 # define pfn_to_page(pfn)	(vmem_map + (pfn))
+# define __pfn_to_phys(pfn)	PFN_PHYS(pfn)
 #else
 # include <asm-generic/memory_model.h>
 #endif
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index 07039d168f37..c0835b0dc722 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -50,8 +50,6 @@ struct pci_dev;
 extern unsigned long ia64_max_iommu_merge_mask;
 #define PCI_DMA_BUS_IS_PHYS	(ia64_max_iommu_merge_mask == ~0UL)
 
-#include <asm-generic/pci-dma-compat.h>
-
 #define HAVE_PCI_MMAP
 extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
 				enum pci_mmap_state mmap_state, int write_combine);
diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h
index 0ec484d2dcbc..b9295793a5e2 100644
--- a/arch/ia64/include/asm/percpu.h
+++ b/arch/ia64/include/asm/percpu.h
@@ -6,8 +6,6 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
-#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
-
 #ifdef __ASSEMBLY__
 # define THIS_CPU(var)	(var)  /* use this to mark accesses to per-CPU variables... */
 #else /* !__ASSEMBLY__ */
diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h
index 3027e7516d85..ce112472bdd6 100644
--- a/arch/ia64/include/asm/rwsem.h
+++ b/arch/ia64/include/asm/rwsem.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
  * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
- * Copyright (C) 2005 Christoph Lameter <clameter@sgi.com>
+ * Copyright (C) 2005 Christoph Lameter <cl@linux.com>
  *
  * Based on asm-i386/rwsem.h and other architecture implementation.
  *
diff --git a/arch/ia64/include/asm/uaccess.h b/arch/ia64/include/asm/uaccess.h
index 4f3fb6ccbf21..2189d5ddc1ee 100644
--- a/arch/ia64/include/asm/uaccess.h
+++ b/arch/ia64/include/asm/uaccess.h
@@ -341,13 +341,11 @@ extern unsigned long __strnlen_user (const char __user *, long);
 	__su_ret;						\
 })
 
-/* Generic code can't deal with the location-relative format that we use for compactness.  */
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
+#define ARCH_HAS_RELATIVE_EXTABLE
 
 struct exception_table_entry {
-	int addr;	/* location-relative address of insn this fixup is for */
-	int cont;	/* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
+	int insn;	/* location-relative address of insn this fixup is for */
+	int fixup;	/* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
 };
 
 extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index db73390568c8..8c85209753ab 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			322 /* length of syscall table */
+#define NR_syscalls			326 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/include/uapi/asm/siginfo.h b/arch/ia64/include/uapi/asm/siginfo.h
index bce9bc1a66c4..f72bf0172bb2 100644
--- a/arch/ia64/include/uapi/asm/siginfo.h
+++ b/arch/ia64/include/uapi/asm/siginfo.h
@@ -63,10 +63,15 @@ typedef struct siginfo {
 			unsigned int _flags;	/* see below */
 			unsigned long _isr;	/* isr */
 			short _addr_lsb;	/* lsb of faulting address */
-			struct {
-				void __user *_lower;
-				void __user *_upper;
-			} _addr_bnd;
+			union {
+				/* used when si_code=SEGV_BNDERR */
+				struct {
+					void __user *_lower;
+					void __user *_upper;
+				} _addr_bnd;
+				/* used when si_code=SEGV_PKUERR */
+				__u32 _pkey;
+			};
 		} _sigfault;
 
 		/* SIGPOLL */
diff --git a/arch/ia64/include/uapi/asm/socket.h b/arch/ia64/include/uapi/asm/socket.h
index 59be3d87f86d..0018fad9039f 100644
--- a/arch/ia64/include/uapi/asm/socket.h
+++ b/arch/ia64/include/uapi/asm/socket.h
@@ -94,4 +94,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/uapi/asm/unistd.h b/arch/ia64/include/uapi/asm/unistd.h
index 9038726e7d26..ea5363daa7bd 100644
--- a/arch/ia64/include/uapi/asm/unistd.h
+++ b/arch/ia64/include/uapi/asm/unistd.h
@@ -335,5 +335,9 @@
 #define __NR_userfaultfd		1343
 #define __NR_membarrier			1344
 #define __NR_kcmp			1345
+#define __NR_mlock2			1346
+#define __NR_copy_file_range		1347
+#define __NR_preadv2			1348
+#define __NR_pwritev2			1349
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index caae3f4e4341..300dac3702f1 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -1178,7 +1178,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 	efi_memory_desc_t *md;
 	u64 efi_desc_size;
 	char *name;
-	unsigned long flags;
+	unsigned long flags, desc;
 
 	efi_map_start = __va(ia64_boot_param->efi_memmap);
 	efi_map_end   = efi_map_start + ia64_boot_param->efi_memmap_size;
@@ -1193,6 +1193,8 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 			continue;
 
 		flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		desc = IORES_DESC_NONE;
+
 		switch (md->type) {
 
 			case EFI_MEMORY_MAPPED_IO:
@@ -1207,14 +1209,17 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 				if (md->attribute & EFI_MEMORY_WP) {
 					name = "System ROM";
 					flags |= IORESOURCE_READONLY;
-				} else if (md->attribute == EFI_MEMORY_UC)
+				} else if (md->attribute == EFI_MEMORY_UC) {
 					name = "Uncached RAM";
-				else
+				} else {
 					name = "System RAM";
+					flags |= IORESOURCE_SYSRAM;
+				}
 				break;
 
 			case EFI_ACPI_MEMORY_NVS:
 				name = "ACPI Non-volatile Storage";
+				desc = IORES_DESC_ACPI_NV_STORAGE;
 				break;
 
 			case EFI_UNUSABLE_MEMORY:
@@ -1224,6 +1229,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 
 			case EFI_PERSISTENT_MEMORY:
 				name = "Persistent Memory";
+				desc = IORES_DESC_PERSISTENT_MEMORY;
 				break;
 
 			case EFI_RESERVED_TYPE:
@@ -1246,6 +1252,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 		res->start = md->phys_addr;
 		res->end = md->phys_addr + efi_md_size(md) - 1;
 		res->flags = flags;
+		res->desc = desc;
 
 		if (insert_resource(&iomem_resource, res) < 0)
 			kfree(res);
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index dcd97f84d065..cfaa7b25084c 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1771,5 +1771,9 @@ sys_call_table:
 	data8 sys_userfaultfd
 	data8 sys_membarrier
 	data8 sys_kcmp				// 1345
+	data8 sys_mlock2
+	data8 sys_copy_file_range
+	data8 sys_preadv2
+	data8 sys_pwritev2
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index 0c161ed6d18e..09f845793d12 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -142,8 +142,7 @@ store_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 	u64 virt_addr=simple_strtoull(buf, NULL, 16);
 	int ret;
 
-        ret = get_user_pages(current, current->mm, virt_addr,
-                        1, VM_READ, 0, NULL, NULL);
+	ret = get_user_pages(virt_addr, 1, VM_READ, 0, NULL, NULL);
 	if (ret<=0) {
 #ifdef ERR_INJ_DEBUG
 		printk("Virtual address %lx is not existing.\n",virt_addr);
diff --git a/arch/ia64/kernel/ftrace.c b/arch/ia64/kernel/ftrace.c
index 3b0c2aa07857..cee411e647ca 100644
--- a/arch/ia64/kernel/ftrace.c
+++ b/arch/ia64/kernel/ftrace.c
@@ -97,13 +97,11 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing. We do this by using the
-	 *  probe_kernel_* functions.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine, or before SMP starts.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	if (!do_check)
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index d2fae054d988..90fde5b8669d 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -256,7 +256,7 @@ set_rte (unsigned int gsi, unsigned int irq, unsigned int dest, int mask)
 }
 
 static void
-nop (struct irq_data *data)
+iosapic_nop (struct irq_data *data)
 {
 	/* do nothing... */
 }
@@ -415,7 +415,7 @@ iosapic_unmask_level_irq (struct irq_data *data)
 #define iosapic_shutdown_level_irq	mask_irq
 #define iosapic_enable_level_irq	unmask_irq
 #define iosapic_disable_level_irq	mask_irq
-#define iosapic_ack_level_irq		nop
+#define iosapic_ack_level_irq		iosapic_nop
 
 static struct irq_chip irq_type_iosapic_level = {
 	.name =			"IO-SAPIC-level",
@@ -453,7 +453,7 @@ iosapic_ack_edge_irq (struct irq_data *data)
 }
 
 #define iosapic_enable_edge_irq		unmask_irq
-#define iosapic_disable_edge_irq	nop
+#define iosapic_disable_edge_irq	iosapic_nop
 
 static struct irq_chip irq_type_iosapic_edge = {
 	.name =			"IO-SAPIC-edge",
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index b15933c31b2f..6ab0ae7d6535 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -486,13 +486,13 @@ module_frob_arch_sections (Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, char *secstrings,
 static inline int
 in_init (const struct module *mod, uint64_t addr)
 {
-	return addr - (uint64_t) mod->module_init < mod->init_size;
+	return addr - (uint64_t) mod->init_layout.base < mod->init_layout.size;
 }
 
 static inline int
 in_core (const struct module *mod, uint64_t addr)
 {
-	return addr - (uint64_t) mod->module_core < mod->core_size;
+	return addr - (uint64_t) mod->core_layout.base < mod->core_layout.size;
 }
 
 static inline int
@@ -675,7 +675,7 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 		break;
 
 	      case RV_BDREL:
-		val -= (uint64_t) (in_init(mod, val) ? mod->module_init : mod->module_core);
+		val -= (uint64_t) (in_init(mod, val) ? mod->init_layout.base : mod->core_layout.base);
 		break;
 
 	      case RV_LTV:
@@ -810,15 +810,15 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind
 		 *     addresses have been selected...
 		 */
 		uint64_t gp;
-		if (mod->core_size > MAX_LTOFF)
+		if (mod->core_layout.size > MAX_LTOFF)
 			/*
 			 * This takes advantage of fact that SHF_ARCH_SMALL gets allocated
 			 * at the end of the module.
 			 */
-			gp = mod->core_size - MAX_LTOFF / 2;
+			gp = mod->core_layout.size - MAX_LTOFF / 2;
 		else
-			gp = mod->core_size / 2;
-		gp = (uint64_t) mod->module_core + ((gp + 7) & -8);
+			gp = mod->core_layout.size / 2;
+		gp = (uint64_t) mod->core_layout.base + ((gp + 7) & -8);
 		mod->arch.gp = gp;
 		DEBUGP("%s: placing gp at 0x%lx\n", __func__, gp);
 	}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 60e02f7747ff..9cd607b06964 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2332,8 +2332,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t
 	 */
 	insert_vm_struct(mm, vma);
 
-	vm_stat_account(vma->vm_mm, vma->vm_flags, vma->vm_file,
-							vma_pages(vma));
+	vm_stat_account(vma->vm_mm, vma->vm_flags, vma_pages(vma));
 	up_write(&task->mm->mmap_sem);
 
 	/*
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 4f118b0d3091..2029a38a72ae 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -80,17 +80,17 @@ unsigned long vga_console_membase;
 
 static struct resource data_resource = {
 	.name	= "Kernel data",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource code_resource = {
 	.name	= "Kernel code",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource bss_resource = {
 	.name	= "Kernel bss",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 unsigned long ia64_max_cacheline_size;
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 0e76fad27975..74fe317477e6 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -454,7 +454,7 @@ start_secondary (void *unused)
 	preempt_disable();
 	smp_callin();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 	return 0;
 }
 
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 622772b7fb6c..e7ae6088350a 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -1336,8 +1336,11 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			 * Don't call tty_write_message() if we're in the kernel; we might
 			 * be holding locks...
 			 */
-			if (user_mode(regs))
-				tty_write_message(current->signal->tty, buf);
+			if (user_mode(regs)) {
+				struct tty_struct *tty = get_current_tty();
+				tty_write_message(tty, buf);
+				tty_kref_put(tty);
+			}
 			buf[len-1] = '\0';	/* drop '\r' */
 			/* watch for command names containing %s */
 			printk(KERN_WARNING "%s", buf);
diff --git a/arch/ia64/lib/checksum.c b/arch/ia64/lib/checksum.c
index 9fc955026f86..2cb23cb0c2e1 100644
--- a/arch/ia64/lib/checksum.c
+++ b/arch/ia64/lib/checksum.c
@@ -34,8 +34,8 @@ from64to16 (unsigned long x)
  * returns a 16-bit checksum, already complemented.
  */
 __sum16
-csum_tcpudp_magic (__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len,
+		  __u8 proto, __wsum sum)
 {
 	return (__force __sum16)~from64to16(
 		(__force u64)saddr + (__force u64)daddr +
@@ -45,8 +45,8 @@ csum_tcpudp_magic (__be32 saddr, __be32 daddr, unsigned short len,
 EXPORT_SYMBOL(csum_tcpudp_magic);
 
 __wsum
-csum_tcpudp_nofold (__be32 saddr, __be32 daddr, unsigned short len,
-		    unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	unsigned long result;
 
diff --git a/arch/ia64/mm/extable.c b/arch/ia64/mm/extable.c
index c99a41e29fe8..8f70bb2d0c37 100644
--- a/arch/ia64/mm/extable.c
+++ b/arch/ia64/mm/extable.c
@@ -5,107 +5,12 @@
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
-#include <linux/sort.h>
-
 #include <asm/uaccess.h>
-#include <linux/module.h>
-
-static int cmp_ex(const void *a, const void *b)
-{
-	const struct exception_table_entry *l = a, *r = b;
-	u64 lip = (u64) &l->addr + l->addr;
-	u64 rip = (u64) &r->addr + r->addr;
-
-	/* avoid overflow */
-	if (lip > rip)
-		return 1;
-	if (lip < rip)
-		return -1;
-	return 0;
-}
-
-static void swap_ex(void *a, void *b, int size)
-{
-	struct exception_table_entry *l = a, *r = b, tmp;
-	u64 delta = (u64) r - (u64) l;
-
-	tmp = *l;
-	l->addr = r->addr + delta;
-	l->cont = r->cont + delta;
-	r->addr = tmp.addr - delta;
-	r->cont = tmp.cont - delta;
-}
-
-/*
- * Sort the exception table. It's usually already sorted, but there
- * may be unordered entries due to multiple text sections (such as the
- * .init text section). Note that the exception-table-entries contain
- * location-relative addresses, which requires a bit of care during
- * sorting to avoid overflows in the offset members (e.g., it would
- * not be safe to make a temporary copy of an exception-table entry on
- * the stack, because the stack may be more than 2GB away from the
- * exception-table).
- */
-void sort_extable (struct exception_table_entry *start,
-		   struct exception_table_entry *finish)
-{
-	sort(start, finish - start, sizeof(struct exception_table_entry),
-	     cmp_ex, swap_ex);
-}
-
-static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
-{
-	return (unsigned long)&x->addr + x->addr;
-}
-
-#ifdef CONFIG_MODULES
-/*
- * Any entry referring to the module init will be at the beginning or
- * the end.
- */
-void trim_init_extable(struct module *m)
-{
-	/*trim the beginning*/
-	while (m->num_exentries &&
-	       within_module_init(ex_to_addr(&m->extable[0]), m)) {
-		m->extable++;
-		m->num_exentries--;
-	}
-	/*trim the end*/
-	while (m->num_exentries &&
-	       within_module_init(ex_to_addr(&m->extable[m->num_exentries-1]),
-				  m))
-		m->num_exentries--;
-}
-#endif /* CONFIG_MODULES */
-
-const struct exception_table_entry *
-search_extable (const struct exception_table_entry *first,
-		const struct exception_table_entry *last,
-		unsigned long ip)
-{
-	const struct exception_table_entry *mid;
-	unsigned long mid_ip;
-	long diff;
-
-        while (first <= last) {
-		mid = &first[(last - first)/2];
-		mid_ip = (u64) &mid->addr + mid->addr;
-		diff = mid_ip - ip;
-                if (diff == 0)
-                        return mid;
-                else if (diff < 0)
-                        first = mid + 1;
-                else
-                        last = mid - 1;
-        }
-        return NULL;
-}
 
 void
 ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e)
 {
-	long fix = (u64) &e->cont + e->cont;
+	long fix = (u64) &e->fixup + e->fixup;
 
 	regs->r8 = -EFAULT;
 	if (fix & 4)
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index f50d4b3f501a..85de86d36fdf 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -38,7 +38,7 @@ huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 	if (pud) {
 		pmd = pmd_alloc(mm, pud, taddr);
 		if (pmd)
-			pte = pte_alloc_map(mm, NULL, pmd, taddr);
+			pte = pte_alloc_map(mm, pmd, taddr);
 	}
 	return pte;
 }
diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c
index fc505d58f078..41caa99add51 100644
--- a/arch/ia64/pci/fixup.c
+++ b/arch/ia64/pci/fixup.c
@@ -17,14 +17,14 @@
  *
  * The standard boot ROM sequence for an x86 machine uses the BIOS
  * to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
+ * card will have its BIOS copied to 0xC0000 in system RAM.
  * IORESOURCE_ROM_SHADOW is used to associate the boot video
  * card with this copy. On laptops this copy has to be used since
  * the main ROM may be compressed or combined with another image.
  * See pci_map_rom() for use of this flag. Before marking the device
  * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
- * by either arch cde or vga-arbitration, if so only apply the fixup to this
- * already determined primary video card.
+ * by either arch code or vga-arbitration; if so only apply the fixup to this
+ * already-determined primary video card.
  */
 
 static void pci_fixup_video(struct pci_dev *pdev)
@@ -32,6 +32,7 @@ static void pci_fixup_video(struct pci_dev *pdev)
 	struct pci_dev *bridge;
 	struct pci_bus *bus;
 	u16 config;
+	struct resource *res;
 
 	if ((strcmp(ia64_platform_name, "dig") != 0)
 	    && (strcmp(ia64_platform_name, "hpzx1")  != 0))
@@ -61,8 +62,18 @@ static void pci_fixup_video(struct pci_dev *pdev)
 	if (!vga_default_device() || pdev == vga_default_device()) {
 		pci_read_config_word(pdev, PCI_COMMAND, &config);
 		if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
-			pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-			dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n");
+			res = &pdev->resource[PCI_ROM_RESOURCE];
+
+			pci_disable_rom(pdev);
+			if (res->parent)
+				release_resource(res);
+
+			res->start = 0xC0000;
+			res->end = res->start + 0x20000 - 1;
+			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+				     IORESOURCE_PCI_FIXED;
+			dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
+				 res);
 		}
 	}
 }
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 0640739cc20c..231234c8d113 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -429,7 +429,8 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
 	void __iomem *addr;
 	struct pcidev_info *pcidev_info = NULL;
 	struct sn_irq_info *sn_irq_info = NULL;
-	size_t image_size, size;
+	struct resource *res;
+	size_t size;
 
 	if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
 		panic("%s:  Failure obtaining pcidev_info for %s\n",
@@ -443,17 +444,20 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
 		 * of the shadowed copy, and the actual length of the ROM image.
 		 */
 		size = pci_resource_len(dev, PCI_ROM_RESOURCE);
-		addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
-			       size);
-		image_size = pci_get_rom_size(dev, addr, size);
-		dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
-		dev->resource[PCI_ROM_RESOURCE].end =
-					(unsigned long) addr + image_size - 1;
-		dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY;
+
+		res = &dev->resource[PCI_ROM_RESOURCE];
+
+		pci_disable_rom(dev);
+		if (res->parent)
+			release_resource(res);
+
+		res->start = pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE];
+		res->end = res->start + size - 1;
+		res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+			     IORESOURCE_PCI_FIXED;
 	}
 	sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
 }
-
 EXPORT_SYMBOL(sn_acpi_slot_fixup);
 
 
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 1be65eb074ec..c15a41e2d1f2 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -150,7 +150,8 @@ void
 sn_io_slot_fixup(struct pci_dev *dev)
 {
 	int idx;
-	unsigned long addr, end, size, start;
+	struct resource *res;
+	unsigned long addr, size;
 	struct pcidev_info *pcidev_info;
 	struct sn_irq_info *sn_irq_info;
 	int status;
@@ -175,55 +176,41 @@ sn_io_slot_fixup(struct pci_dev *dev)
 
 	/* Copy over PIO Mapped Addresses */
 	for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
-
-		if (!pcidev_info->pdi_pio_mapped_addr[idx]) {
+		if (!pcidev_info->pdi_pio_mapped_addr[idx])
 			continue;
-		}
 
-		start = dev->resource[idx].start;
-		end = dev->resource[idx].end;
-		size = end - start;
-		if (size == 0) {
+		res = &dev->resource[idx];
+
+		size = res->end - res->start;
+		if (size == 0)
 			continue;
-		}
-		addr = pcidev_info->pdi_pio_mapped_addr[idx];
-		addr = ((addr << 4) >> 4) | __IA64_UNCACHED_OFFSET;
-		dev->resource[idx].start = addr;
-		dev->resource[idx].end = addr + size;
+
+		res->start = pcidev_info->pdi_pio_mapped_addr[idx];
+		res->end = addr + size;
 
 		/*
 		 * if it's already in the device structure, remove it before
 		 * inserting
 		 */
-		if (dev->resource[idx].parent && dev->resource[idx].parent->child)
-			release_resource(&dev->resource[idx]);
+		if (res->parent && res->parent->child)
+			release_resource(res);
 
-		if (dev->resource[idx].flags & IORESOURCE_IO)
-			insert_resource(&ioport_resource, &dev->resource[idx]);
+		if (res->flags & IORESOURCE_IO)
+			insert_resource(&ioport_resource, res);
 		else
-			insert_resource(&iomem_resource, &dev->resource[idx]);
+			insert_resource(&iomem_resource, res);
 		/*
-		 * If ROM, set the actual ROM image size, and mark as
-		 * shadowed in PROM.
+		 * If ROM, mark as shadowed in PROM.
 		 */
 		if (idx == PCI_ROM_RESOURCE) {
-			size_t image_size;
-			void __iomem *rom;
-
-			rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
-				      size + 1);
-			image_size = pci_get_rom_size(dev, rom, size + 1);
-			dev->resource[PCI_ROM_RESOURCE].end =
-				dev->resource[PCI_ROM_RESOURCE].start +
-				image_size - 1;
-			dev->resource[PCI_ROM_RESOURCE].flags |=
-						 IORESOURCE_ROM_BIOS_COPY;
+			pci_disable_rom(dev);
+			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+				     IORESOURCE_PCI_FIXED;
 		}
 	}
 
 	sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
 }
-
 EXPORT_SYMBOL(sn_io_slot_fixup);
 
 /*
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 9e44bbd8051e..c82b29253991 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -13,6 +13,7 @@ config M32R
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_USES_GETTIMEOFFSET
 	select MODULES_USE_ELF_RELA
 	select HAVE_DEBUG_STACKOVERFLOW
@@ -275,6 +276,7 @@ source "kernel/Kconfig.preempt"
 
 config SMP
 	bool "Symmetric multi-processing support"
+	depends on MMU
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
@@ -385,8 +387,6 @@ config ISA
 
 source "drivers/pcmcia/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
 endmenu
 
 
diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild
index fd104bd221ce..860e440611c9 100644
--- a/arch/m32r/include/asm/Kbuild
+++ b/arch/m32r/include/asm/Kbuild
@@ -3,6 +3,7 @@ generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += exec.h
 generic-y += irq_work.h
+generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += module.h
diff --git a/arch/m32r/include/asm/checksum.h b/arch/m32r/include/asm/checksum.h
index a7a7c4f44abe..d68e93c9bd62 100644
--- a/arch/m32r/include/asm/checksum.h
+++ b/arch/m32r/include/asm/checksum.h
@@ -114,9 +114,8 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 }
 
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					       unsigned short len,
-					       unsigned short proto,
-					       __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 #if defined(__LITTLE_ENDIAN)
 	unsigned long len_proto = (proto + len) << 8;
@@ -145,9 +144,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h
index 61b8931bc192..4b0f5e001d4d 100644
--- a/arch/m32r/include/asm/io.h
+++ b/arch/m32r/include/asm/io.h
@@ -168,13 +168,21 @@ static inline void _writel(unsigned long l, unsigned long addr)
 #define writew_relaxed writew
 #define writel_relaxed writel
 
-#define ioread8 read
+#define ioread8 readb
 #define ioread16 readw
 #define ioread32 readl
 #define iowrite8 writeb
 #define iowrite16 writew
 #define iowrite32 writel
 
+#define ioread8_rep(p, dst, count) insb((unsigned long)(p), (dst), (count))
+#define ioread16_rep(p, dst, count) insw((unsigned long)(p), (dst), (count))
+#define ioread32_rep(p, dst, count) insl((unsigned long)(p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) outsb((unsigned long)(p), (src), (count))
+#define iowrite16_rep(p, src, count) outsw((unsigned long)(p), (src), (count))
+#define iowrite32_rep(p, src, count) outsl((unsigned long)(p), (src), (count))
+
 #define ioread16be(addr)	be16_to_cpu(readw(addr))
 #define ioread32be(addr)	be32_to_cpu(readl(addr))
 #define iowrite16be(v, addr)	writew(cpu_to_be16(v), (addr))
diff --git a/arch/m32r/include/uapi/asm/socket.h b/arch/m32r/include/uapi/asm/socket.h
index 7bc4cb273856..5fe42fc7b6c5 100644
--- a/arch/m32r/include/uapi/asm/socket.h
+++ b/arch/m32r/include/uapi/asm/socket.h
@@ -85,4 +85,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c
index 0392112a5d70..136c69f1fb8a 100644
--- a/arch/m32r/kernel/setup.c
+++ b/arch/m32r/kernel/setup.c
@@ -70,18 +70,21 @@ static struct resource data_resource = {
 	.name   = "Kernel data",
 	.start  = 0,
 	.end    = 0,
-	.flags  = IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags  = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource code_resource = {
 	.name   = "Kernel code",
 	.start  = 0,
 	.end    = 0,
-	.flags  = IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags  = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
+
 unsigned long memory_end;
+EXPORT_SYMBOL(memory_end);
 
 void __init setup_arch(char **);
 int get_cpuinfo(char *);
diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c
index a468467542f4..f98d2f6519d6 100644
--- a/arch/m32r/kernel/smpboot.c
+++ b/arch/m32r/kernel/smpboot.c
@@ -432,7 +432,7 @@ int __init start_secondary(void *unused)
 	 */
 	local_flush_tlb_all();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 	return 0;
 }
 
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index 0d4146f644dc..11fa717d93b1 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -59,21 +59,24 @@ void free_initrd_mem(unsigned long, unsigned long);
 void __init zone_sizes_init(void)
 {
 	unsigned long  zones_size[MAX_NR_ZONES] = {0, };
-	unsigned long  max_dma;
-	unsigned long  low;
 	unsigned long  start_pfn;
 
 #ifdef CONFIG_MMU
-	start_pfn = START_PFN(0);
-	max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	low = MAX_LOW_PFN(0);
-
-	if (low < max_dma){
-		zones_size[ZONE_DMA] = low - start_pfn;
-		zones_size[ZONE_NORMAL] = 0;
-	} else {
-		zones_size[ZONE_DMA] = low - start_pfn;
-		zones_size[ZONE_NORMAL] = low - max_dma;
+	{
+		unsigned long  low;
+		unsigned long  max_dma;
+
+		start_pfn = START_PFN(0);
+		max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+		low = MAX_LOW_PFN(0);
+
+		if (low < max_dma) {
+			zones_size[ZONE_DMA] = low - start_pfn;
+			zones_size[ZONE_NORMAL] = 0;
+		} else {
+			zones_size[ZONE_DMA] = low - start_pfn;
+			zones_size[ZONE_NORMAL] = low - max_dma;
+		}
 	}
 #else
 	zones_size[ZONE_DMA] = 0 >> PAGE_SHIFT;
diff --git a/arch/m68k/68360/Makefile b/arch/m68k/68360/Makefile
deleted file mode 100644
index 591ce42df3de..000000000000
--- a/arch/m68k/68360/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# Makefile for 68360 machines.
-#
-model-y			  := ram
-model-$(CONFIG_ROMKERNEL) := rom
-
-obj-y := config.o commproc.o entry.o ints.o
-
-extra-y := head.o
-
-$(obj)/head.o: $(obj)/head-$(model-y).o
-	ln -sf head-$(model-y).o $(obj)/head.o
diff --git a/arch/m68k/68360/commproc.c b/arch/m68k/68360/commproc.c
deleted file mode 100644
index 14d7f35cd37b..000000000000
--- a/arch/m68k/68360/commproc.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * Communication Processor Module.
- *
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- * The amount of space available is platform dependent.  On the
- * MBX, the EPPC software loads additional microcode into the
- * communication processor, and uses some of the DP ram for this
- * purpose.  Current, the first 512 bytes and the last 256 bytes of
- * memory are used.  Right now I am conservative and only use the
- * memory that can never be used for microcode.  If there are
- * applications that require more DP ram, we can expand the boundaries
- * but then we have to be careful of any downloaded microcode.
- *
- */
-
-/*
- * Michael Leslie <mleslie@lineo.com>
- * adapted Dan Malek's ppc8xx drivers to M68360
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/m68360.h>
-#include <asm/commproc.h>
-
-/* #include <asm/page.h> */
-/* #include <asm/pgtable.h> */
-extern void *_quicc_base;
-extern unsigned int system_clock;
-
-
-static uint dp_alloc_base;	/* Starting offset in DP ram */
-static uint dp_alloc_top;	/* Max offset + 1 */
-
-#if 0
-static	void	*host_buffer;	/* One page of host buffer */
-static	void	*host_end;	    /* end + 1 */
-#endif
-
-/* struct  cpm360_t *cpmp; */         /* Pointer to comm processor space */
-
-QUICC  *pquicc;
-/* QUICC  *quicc_dpram; */ /* mleslie - temporary; use extern pquicc elsewhere instead */
-
-
-/* CPM interrupt vector functions. */
-struct	cpm_action {
-	irq_handler_t	handler;
-	void		*dev_id;
-};
-static	struct	cpm_action cpm_vecs[CPMVEC_NR];
-static	void	cpm_interrupt(int irq, void * dev, struct pt_regs * regs);
-static	void	cpm_error_interrupt(void *);
-
-/* prototypes: */
-void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id);
-void m360_cpm_reset(void);
-
-
-
-
-void __init m360_cpm_reset()
-{
-/* 	pte_t		   *pte; */
-
-	pquicc = (struct quicc *)(_quicc_base); /* initialized in crt0_rXm.S */
-
-	/* Perform a CPM reset. */
-	pquicc->cp_cr = (SOFTWARE_RESET | CMD_FLAG);
-
-	/* Wait for CPM to become ready (should be 2 clocks). */
-	while (pquicc->cp_cr & CMD_FLAG);
-
-	/* On the recommendation of the 68360 manual, p. 7-60
-	 * - Set sdma interrupt service mask to 7
-	 * - Set sdma arbitration ID to 4
-	 */
-	pquicc->sdma_sdcr = 0x0740;
-
-
-	/* Claim the DP memory for our use.
-	 */
-	dp_alloc_base = CPM_DATAONLY_BASE;
-	dp_alloc_top = dp_alloc_base + CPM_DATAONLY_SIZE;
-
-
-	/* Set the host page for allocation.
-	 */
-	/* 	host_buffer = host_page_addr; */
-	/* 	host_end = host_page_addr + PAGE_SIZE; */
-
-	/* 	pte = find_pte(&init_mm, host_page_addr); */
-	/* 	pte_val(*pte) |= _PAGE_NO_CACHE; */
-	/* 	flush_tlb_page(current->mm->mmap, host_buffer); */
-
-	/* Tell everyone where the comm processor resides.
-	*/
-/* 	cpmp = (cpm360_t *)commproc; */
-}
-
-
-/* This is called during init_IRQ.  We used to do it above, but this
- * was too early since init_IRQ was not yet called.
- */
-void
-cpm_interrupt_init(void)
-{
-	/* Initialize the CPM interrupt controller.
-	 * NOTE THAT pquicc had better have been initialized!
-	 * reference: MC68360UM p. 7-377
-	 */
-	pquicc->intr_cicr =
-		(CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
-		(CPM_INTERRUPT << 13) |
-		CICR_HP_MASK |
-		(CPM_VECTOR_BASE << 5) |
-		CICR_SPS;
-
-	/* mask all CPM interrupts from reaching the cpu32 core: */
-	pquicc->intr_cimr = 0;
-
-
-	/* mles - If I understand correctly, the 360 just pops over to the CPM
-	 * specific vector, obviating the necessity to vector through the IRQ
-	 * whose priority the CPM is set to. This needs a closer look, though.
-	 */
-
-	/* Set our interrupt handler with the core CPU. */
-/* 	if (request_irq(CPM_INTERRUPT, cpm_interrupt, 0, "cpm", NULL) != 0) */
-/* 		panic("Could not allocate CPM IRQ!"); */
-
-	/* Install our own error handler.
-	 */
-	/* I think we want to hold off on this one for the moment - mles */
-	/* cpm_install_handler(CPMVEC_ERROR, cpm_error_interrupt, NULL); */
-
-	/* master CPM interrupt enable */
-	/* pquicc->intr_cicr |= CICR_IEN; */ /* no such animal for 360 */
-}
-
-
-
-/* CPM interrupt controller interrupt.
-*/
-static	void
-cpm_interrupt(int irq, void * dev, struct pt_regs * regs)
-{
-	/* uint	vec; */
-
-	/* mles: Note that this stuff is currently being performed by
-	 * M68360_do_irq(int vec, struct pt_regs *fp), in ../ints.c  */
-
-	/* figure out the vector */
-	/* call that vector's handler */
-	/* clear the irq's bit in the service register */
-
-#if 0 /* old 860 stuff: */
-	/* Get the vector by setting the ACK bit and then reading
-	 * the register.
-	 */
-	((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr = 1;
-	vec = ((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr;
-	vec >>= 11;
-
-
-	if (cpm_vecs[vec].handler != 0)
-		(*cpm_vecs[vec].handler)(cpm_vecs[vec].dev_id);
-	else
-		((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec);
-
-	/* After servicing the interrupt, we have to remove the status
-	 * indicator.
-	 */
-	((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr |= (1 << vec);
-#endif
-
-}
-
-/* The CPM can generate the error interrupt when there is a race condition
- * between generating and masking interrupts.  All we have to do is ACK it
- * and return.  This is a no-op function so we don't need any special
- * tests in the interrupt handler.
- */
-static	void
-cpm_error_interrupt(void *dev)
-{
-}
-
-/* Install a CPM interrupt handler.
-*/
-void
-cpm_install_handler(int vec, irq_handler_t handler, void *dev_id)
-{
-
-	request_irq(vec, handler, 0, "timer", dev_id);
-
-/* 	if (cpm_vecs[vec].handler != 0) */
-/* 		printk(KERN_INFO "CPM interrupt %x replacing %x\n", */
-/* 			(uint)handler, (uint)cpm_vecs[vec].handler); */
-/* 	cpm_vecs[vec].handler = handler; */
-/* 	cpm_vecs[vec].dev_id = dev_id; */
-
-	/*              ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr |= (1 << vec); */
-/* 	pquicc->intr_cimr |= (1 << vec); */
-
-}
-
-/* Free a CPM interrupt handler.
-*/
-void
-cpm_free_handler(int vec)
-{
-	cpm_vecs[vec].handler = NULL;
-	cpm_vecs[vec].dev_id = NULL;
-	/* ((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr &= ~(1 << vec); */
-	pquicc->intr_cimr &= ~(1 << vec);
-}
-
-
-
-
-/* Allocate some memory from the dual ported ram.  We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint
-m360_cpm_dpalloc(uint size)
-{
-        uint    retloc;
-
-        if ((dp_alloc_base + size) >= dp_alloc_top)
-                return(CPM_DP_NOSPACE);
-
-        retloc = dp_alloc_base;
-        dp_alloc_base += size;
-
-        return(retloc);
-}
-
-
-#if 0 /* mleslie - for now these are simply kmalloc'd */
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m360_cpm_hostalloc(uint size)
-{
-	uint	retloc;
-
-	if ((host_buffer + size) >= host_end)
-		return(0);
-
-	retloc = host_buffer;
-	host_buffer += size;
-
-	return(retloc);
-}
-#endif
-
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * four BRGs, any of which can be wired to any channel.
- * The internal baud rate clock is the system clock divided by 16.
- * This assumes the baudrate is 16x oversampled by the uart.
- */
-/* #define BRG_INT_CLK	(((bd_t *)__res)->bi_intfreq * 1000000) */
-#define BRG_INT_CLK		system_clock
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-void
-m360_cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	 */
-	/* bp = (uint *)&cpmp->cp_brgc1; */
-	bp = (volatile uint *)(&pquicc->brgc[0].l);
-	bp += brg;
-	*bp = ((BRG_UART_CLK / rate - 1) << 1) | CPM_BRG_EN;
-}
-
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/arch/m68k/68360/config.c b/arch/m68k/68360/config.c
deleted file mode 100644
index b65fe4eed38e..000000000000
--- a/arch/m68k/68360/config.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- *  config.c - non-mmu 68360 platform initialization code
- *
- *  Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <stdarg.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <asm/setup.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/m68360.h>
-
-#ifdef CONFIG_UCQUICC
-#include <asm/bootstd.h>
-#endif
-
-extern void m360_cpm_reset(void);
-
-// Mask to select if the PLL prescaler is enabled.
-#define MCU_PREEN   ((unsigned short)(0x0001 << 13))
-
-#if defined(CONFIG_UCQUICC)
-#define OSCILLATOR  (unsigned long int)33000000
-#endif
-
-static irq_handler_t timer_interrupt;
-unsigned long int system_clock;
-
-extern QUICC *pquicc;
-
-/* TODO  DON"T Hard Code this */
-/* calculate properly using the right PLL and prescaller */
-// unsigned int system_clock = 33000000l;
-extern unsigned long int system_clock; //In kernel setup.c
-
-
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
-  /* Reset Timer1 */
-  /* TSTAT &= 0; */
-
-  pquicc->timer_ter1 = 0x0002; /* clear timer event */
-
-  return timer_interrupt(irq, dummy);
-}
-
-static struct irqaction m68360_timer_irq = {
-	.name	 = "timer",
-	.flags	 = IRQF_TIMER,
-	.handler = hw_tick,
-};
-
-void hw_timer_init(irq_handler_t handler)
-{
-  unsigned char prescaler;
-  unsigned short tgcr_save;
-
-#if 0
-  /* Restart mode, Enable int, 32KHz, Enable timer */
-  TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
-  /* Set prescaler (Divide 32KHz by 32)*/
-  TPRER = 31;
-  /* Set compare register  32Khz / 32 / 10 = 100 */
-  TCMP = 10;                                                              
-
-  request_irq(IRQ_MACHSPEC | 1, timer_routine, 0, "timer", NULL);
-#endif
-
-  /* General purpose quicc timers: MC68360UM p7-20 */
-
-  /* Set up timer 1 (in [1..4]) to do 100Hz */
-  tgcr_save = pquicc->timer_tgcr & 0xfff0;
-  pquicc->timer_tgcr  = tgcr_save; /* stop and reset timer 1 */
-  /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
-
-  prescaler = 8;
-  pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
-                           (unsigned short)((prescaler - 1) << 8);
-    
-  pquicc->timer_tcn1 = 0x0000; /* initial count */
-  /* calculate interval for 100Hz based on the _system_clock: */
-  pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
-
-  pquicc->timer_ter1 = 0x0003; /* clear timer events */
-
-  timer_interrupt = handler;
-
-  /* enable timer 1 interrupt in CIMR */
-  setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
-
-  /* Start timer 1: */
-  tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
-  pquicc->timer_tgcr  = tgcr_save;
-}
-
-void BSP_reset (void)
-{
-  local_irq_disable();
-  asm volatile (
-    "moveal #_start, %a0;\n"
-    "moveb #0, 0xFFFFF300;\n"
-    "moveal 0(%a0), %sp;\n"
-    "moveal 4(%a0), %a0;\n"
-    "jmp (%a0);\n"
-    );
-}
-
-unsigned char *scc1_hwaddr;
-static int errno;
-
-#if defined (CONFIG_UCQUICC)
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
-#endif
-
-
-void __init config_BSP(char *command, int len)
-{
-  unsigned char *p;
-
-  m360_cpm_reset();
-
-  /* Calculate the real system clock value. */
-  {
-     unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
-     if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
-     {
-         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
-         system_clock = (OSCILLATOR / 128) * (mf + 1);
-     }
-     else
-     {
-         int mf = (int)(pquicc->sim_pllcr & 0x0fff);
-         system_clock = (OSCILLATOR) * (mf + 1);
-     }
-  }
-
-  printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
-
-#if defined(CONFIG_UCQUICC) && 0
-  printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
-  p = scc1_hwaddr = gethwaddr(0);
-  printk(KERN_INFO "uCquicc hwaddr %pM\n", p);
-
-  p = getbenv("APPEND");
-  if (p)
-    strcpy(p,command);
-  else
-    command[0] = 0;
-#else
-  scc1_hwaddr = "\00\01\02\03\04\05";
-#endif
- 
-  mach_reset = BSP_reset;
-}
diff --git a/arch/m68k/68360/entry.S b/arch/m68k/68360/entry.S
deleted file mode 100644
index 22eb3022f9ee..000000000000
--- a/arch/m68k/68360/entry.S
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  entry.S - non-mmu 68360 interrupt and exceptions entry points
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2001 SED Systems, a Division of Calian Ltd.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file README.legal in the main directory of this archive
- * for more details.
- *
- * Linux/m68k support by Hamish Macdonald
- * M68360 Port by SED Systems, and Lineo.
- */
-
-#include <linux/linkage.h>
-#include <asm/thread_info.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/setup.h>
-#include <asm/segment.h>
-#include <asm/traps.h>
-#include <asm/asm-offsets.h>
-#include <asm/entry.h>
-
-.text
-
-.globl system_call
-.globl resume
-.globl ret_from_exception
-.globl ret_from_signal
-.globl sys_call_table
-.globl bad_interrupt
-.globl inthandler
-
-badsys:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0)
-	jra	ret_from_exception
-
-do_trace:
-	movel	#-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
-	subql	#4,%sp
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_enter
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	movel	%sp@(PT_OFF_ORIG_D0),%d1
-	movel	#-ENOSYS,%d0
-	cmpl	#NR_syscalls,%d1
-	jcc	1f
-	lsl	#2,%d1
-	lea	sys_call_table, %a0
-	jbsr	%a0@(%d1)
-
-1:	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value */
-	subql	#4,%sp			/* dummy return address */
-	SAVE_SWITCH_STACK
-	jbsr	syscall_trace_leave
-
-ret_from_signal:
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	ret_from_exception
-
-ENTRY(system_call)
-	SAVE_ALL_SYS
-
-	/* save top of frame*/
-	pea	%sp@
-	jbsr	set_esp0
-	addql	#4,%sp
-
-	movel	%sp@(PT_OFF_ORIG_D0),%d0
-
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
-	btst	#(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8)
-	jne	do_trace
-	cmpl	#NR_syscalls,%d0
-	jcc	badsys
-	lsl	#2,%d0
-	lea	sys_call_table,%a0
-	movel	%a0@(%d0), %a0
-	jbsr	%a0@
-	movel	%d0,%sp@(PT_OFF_D0)	/* save the return value*/
-
-ret_from_exception:
-	btst	#5,%sp@(PT_OFF_SR)	/* check if returning to kernel*/
-	jeq	Luser_return		/* if so, skip resched, signals*/
-
-Lkernel_return:
-	RESTORE_ALL
-
-Luser_return:
-	/* only allow interrupts when we are really the last one on the*/
-	/* kernel stack, otherwise stack overflow can occur during*/
-	/* heavy interrupt load*/
-	andw	#ALLOWINT,%sr
-
-	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#-THREAD_SIZE,%d1
-	movel	%d1,%a2
-1:
-	move	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
-	jne	Lwork_to_do
-	RESTORE_ALL
-
-Lwork_to_do:
-	movel	%a2@(TINFO_FLAGS),%d1	/* thread_info->flags */
-	btst	#TIF_NEED_RESCHED,%d1
-	jne	reschedule
-
-Lsignal_return:
-	subql	#4,%sp			/* dummy return address*/
-	SAVE_SWITCH_STACK
-	pea	%sp@(SWITCH_STACK_SIZE)
-	bsrw	do_notify_resume
-	addql	#4,%sp
-	RESTORE_SWITCH_STACK
-	addql	#4,%sp
-	jra	1b
-
-/*
- * This is the main interrupt handler, responsible for calling do_IRQ()
- */
-inthandler:
-	SAVE_ALL_INT
-	movew	%sp@(PT_OFF_FORMATVEC), %d0
-	and.l	#0x3ff, %d0
-	lsr.l   #0x02,  %d0
-
-	movel	%sp,%sp@-
-	movel	%d0,%sp@- 		/*  put vector # on stack*/
-	jbsr	do_IRQ			/*  process the IRQ */
-	addql	#8,%sp			/*  pop parameters off stack*/
-	jra	ret_from_exception
-
-/*
- * Handler for uninitialized and spurious interrupts.
- */
-bad_interrupt:
-	addql	#1,irq_err_count
-	rte
-
-/*
- * Beware - when entering resume, prev (the current task) is
- * in a0, next (the new task) is in a1, so don't change these
- * registers until their contents are no longer needed.
- */
-ENTRY(resume)
-	movel	%a0,%d1				/* save prev thread in d1 */
-	movew	%sr,%a0@(TASK_THREAD+THREAD_SR)	/* save sr */
-	SAVE_SWITCH_STACK
-	movel	%sp,%a0@(TASK_THREAD+THREAD_KSP) /* save kernel stack */
-	movel	%usp,%a3			/* save usp */
-	movel	%a3,%a0@(TASK_THREAD+THREAD_USP)
-
-	movel	%a1@(TASK_THREAD+THREAD_USP),%a3 /* restore user stack */
-	movel	%a3,%usp
-	movel	%a1@(TASK_THREAD+THREAD_KSP),%sp /* restore new thread stack */
-	RESTORE_SWITCH_STACK
-	movew	%a1@(TASK_THREAD+THREAD_SR),%sr	/* restore thread status reg */
-	rts
-
diff --git a/arch/m68k/68360/head-ram.S b/arch/m68k/68360/head-ram.S
deleted file mode 100644
index 62bc56f41d57..000000000000
--- a/arch/m68k/68360/head-ram.S
+++ /dev/null
@@ -1,402 +0,0 @@
-/*
- * head-ram.S - startup code for Motorola 68360
- *
- * Copyright 2001 (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- *           uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998  D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-#define ASSEMBLY
-
-.global _stext
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define	RAMEND                      (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-#define	ROMEND                      (CONFIG_ROMBASE + CONFIG_ROMSIZE)
-
-#define REGB                        0x1000
-#define PEPAR                       (_dprbase + REGB + 0x0016)
-#define GMR                         (_dprbase + REGB + 0x0040)
-#define OR0                         (_dprbase + REGB + 0x0054)
-#define BR0                         (_dprbase + REGB + 0x0050)
-#define OR1                         (_dprbase + REGB + 0x0064)
-#define BR1                         (_dprbase + REGB + 0x0060)
-#define OR4                         (_dprbase + REGB + 0x0094)
-#define BR4                         (_dprbase + REGB + 0x0090)
-#define OR6                         (_dprbase + REGB + 0x00b4)
-#define BR6                         (_dprbase + REGB + 0x00b0)
-#define OR7                         (_dprbase + REGB + 0x00c4)
-#define BR7                         (_dprbase + REGB + 0x00c0)
-
-#define MCR                         (_dprbase + REGB + 0x0000)
-#define AVR                         (_dprbase + REGB + 0x0008)
-
-#define SYPCR                       (_dprbase + REGB + 0x0022)
-
-#define PLLCR                       (_dprbase + REGB + 0x0010)
-#define CLKOCR                      (_dprbase + REGB + 0x000C)
-#define CDVCR                       (_dprbase + REGB + 0x0014)
-
-#define BKAR                        (_dprbase + REGB + 0x0030)
-#define BKCR                        (_dprbase + REGB + 0x0034)
-#define SWIV                        (_dprbase + REGB + 0x0023)
-#define PICR                        (_dprbase + REGB + 0x0026)
-#define PITR                        (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR                 0x00000000
-#define SIM_OR_MASK                 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK                0x20000002
-#define SIM_BR0_MASK                0x00000001
-
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK                0x10000000
-#define SIM_BR1_MASK                0x00000001
-
-#define MCU_SIM_MBAR_ADRS           0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK        0xfffff000
-#define MCU_SIM_MBAR_AS_MASK        0x00000001
-
-#define MCU_SIM_PEPAR               0x00B4
-    
-#define MCU_DISABLE_INTRPTS         0x2700
-#define MCU_SIM_AVR                 0x00
-    
-#define MCU_SIM_MCR                 0x00005cff
-
-#define MCU_SIM_CLKOCR              0x00
-#define MCU_SIM_PLLCR               0x8000
-#define MCU_SIM_CDVCR               0x0000
-
-#define MCU_SIM_SYPCR               0x0000
-#define MCU_SIM_SWIV                0x00
-#define MCU_SIM_PICR                0x0000
-#define MCU_SIM_PITR                0x0000
-
-
-#include <asm/m68360_regs.h>
-
-	
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
-	.text
-_start:
-_stext:
-	nop
-	ori.w	#MCU_DISABLE_INTRPTS, %sr	/* disable interrupts: */
-	/* We should not need to setup the boot stack the reset should do it. */
-	movea.l	#RAMEND, %sp			/*set up stack at the end of DRAM:*/
-
-set_mbar_register:
-	moveq.l	#0x07, %d1			/* Setup MBAR */
-	movec	%d1, %dfc
-
-	lea.l	MCU_SIM_MBAR_ADRS, %a0
-	move.l	#_dprbase, %d0
-	andi.l	#MCU_SIM_MBAR_BA_MASK, %d0
-	ori.l	#MCU_SIM_MBAR_AS_MASK, %d0
-	moves.l	%d0, %a0@
-
-	moveq.l	#0x05, %d1
-	movec.l	%d1, %dfc
-
-	/* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
-	/* Set Module Configuration Register */
-	move.l	#MCU_SIM_MCR, MCR
-
-	/* to do:	Determine cause of reset */
-
-	/*
-	 *       configure system clock MC68360 p. 6-40
-	 *       (value +1)*osc/128 = system clock
-	 */
-set_sim_clock:
-	move.w	#MCU_SIM_PLLCR, PLLCR
-	move.b	#MCU_SIM_CLKOCR, CLKOCR
-	move.w	#MCU_SIM_CDVCR, CDVCR
-
-	/* Wait for the PLL to settle */
-	move.w	#16384, %d0
-pll_settle_wait:
-	subi.w	#1, %d0
-	bne	pll_settle_wait
-
-	/* Setup the system protection register, and watchdog timer register */
-	move.b	#MCU_SIM_SWIV, SWIV
-	move.w	#MCU_SIM_PICR, PICR
-	move.w	#MCU_SIM_PITR, PITR
-	move.w	#MCU_SIM_SYPCR, SYPCR
-
-	/* Clear DPRAM - system + parameter */
-	movea.l	#_dprbase, %a0
-	movea.l	#_dprbase+0x2000, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	clear_dpram
-
-configure_memory_controller:    
-	/* Set up Global Memory Register (GMR) */
-	move.l	#MCU_SIM_GMR, %d0
-	move.l	%d0, GMR
-
-configure_chip_select_0:
-	move.l	#RAMEND, %d0
-	subi.l	#__ramstart, %d0
-	subq.l	#0x01, %d0
-	eori.l	#SIM_OR_MASK, %d0
-	ori.l	#SIM_OR0_MASK, %d0
-	move.l	%d0, OR0
-
-	move.l	#__ramstart, %d0
-	ori.l	#SIM_BR0_MASK, %d0
-	move.l	%d0, BR0
-
-configure_chip_select_1:
-	move.l	#ROMEND, %d0
-	subi.l	#__rom_start, %d0
-	subq.l	#0x01, %d0
-	eori.l	#SIM_OR_MASK, %d0
-	ori.l	#SIM_OR1_MASK, %d0
-	move.l	%d0, OR1
-
-	move.l	#__rom_start, %d0
-	ori.l	#SIM_BR1_MASK, %d0
-	move.l	%d0, BR1
-
-	move.w	#MCU_SIM_PEPAR, PEPAR 
-
-	/* point to vector table: */
-	move.l	#_romvec, %a0
-	move.l	#_ramvec, %a1
-copy_vectors:
-	move.l	%a0@, %d0
-	move.l	%d0, %a1@
-	move.l	%a0@, %a1@
-	addq.l	#0x04, %a0
-	addq.l	#0x04, %a1
-	cmp.l	#_start, %a0
-	blt	copy_vectors
-
-	move.l	#_ramvec, %a1
-	movec	%a1, %vbr
-
-
-	/* Copy data segment from ROM to RAM */
-	moveal	#_stext, %a0
-	moveal	#_sdata, %a1
-	moveal	#_edata, %a2
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
-	move.l	%a0@, %d0
-	addq.l	#0x04, %a0
-	move.l	%d0, %a1@
-	addq.l	#0x04, %a1
-	cmp.l	#_edata, %a1
-	blt     LD1
-
-	moveal	#__bss_start, %a0
-	moveal	#__bss_stop, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-L1:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	L1
-
-load_quicc:
-	move.l	#_dprbase, _quicc_base
-
-store_ram_size:
-	/* Set ram size information */
-	move.l	#_sdata, _rambase
-	move.l	#__bss_stop, _ramstart
-	move.l	#RAMEND, %d0
-	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
-	move.l	%d0, _ramend			/* Different from RAMEND.*/
-
-	pea	0
-	pea	env
-	pea	%sp@(4)
-	pea	0
-
-	lea	init_thread_union, %a2
-	lea	0x2000(%a2), %sp
-
-lp:
-	jsr	start_kernel
-
-_exit:
-	jmp	_exit
-
-
-	.data
-	.align 4
-env:
-	.long	0
-_quicc_base:
-	.long	0
-_periph_base:
-	.long	0
-_ramvec:
-	.long   0
-_rambase:
-	.long   0
-_ramstart:
-	.long   0
-_ramend:
-	.long   0
-_dprbase:
-	.long	0xffffe000
-
-	.text
-
-    /*
-     * These are the exception vectors at boot up, they are copied into RAM
-     * and then overwritten as needed.
-     */
- 
-.section ".data..initvect","awx"
-    .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
-    .long   _start      /* Reset: Initial Program Counter               - 1.  */
-    .long   buserr      /* Bus Error                                    - 2.  */
-    .long   trap        /* Address Error                                - 3.  */
-    .long   trap        /* Illegal Instruction                          - 4.  */
-    .long   trap        /* Divide by zero                               - 5.  */
-    .long   trap        /* CHK, CHK2 Instructions                       - 6.  */
-    .long   trap        /* TRAPcc, TRAPV Instructions                   - 7.  */
-    .long   trap        /* Privilege Violation                          - 8.  */
-    .long   trap        /* Trace                                        - 9.  */
-    .long   trap        /* Line 1010 Emulator                           - 10. */
-    .long   trap        /* Line 1111 Emualtor                           - 11. */
-    .long   trap        /* Harware Breakpoint                           - 12. */
-    .long   trap        /* (Reserved for Coprocessor Protocol Violation)- 13. */
-    .long   trap        /* Format Error                                 - 14. */
-    .long   trap        /* Uninitialized Interrupt                      - 15. */
-    .long   trap        /* (Unassigned, Reserver)                       - 16. */
-    .long   trap        /* (Unassigned, Reserver)                       - 17. */
-    .long   trap        /* (Unassigned, Reserver)                       - 18. */
-    .long   trap        /* (Unassigned, Reserver)                       - 19. */
-    .long   trap        /* (Unassigned, Reserver)                       - 20. */
-    .long   trap        /* (Unassigned, Reserver)                       - 21. */
-    .long   trap        /* (Unassigned, Reserver)                       - 22. */
-    .long   trap        /* (Unassigned, Reserver)                       - 23. */
-    .long   trap        /* Spurious Interrupt                           - 24. */
-    .long   trap        /* Level 1 Interrupt Autovector                 - 25. */
-    .long   trap        /* Level 2 Interrupt Autovector                 - 26. */
-    .long   trap        /* Level 3 Interrupt Autovector                 - 27. */
-    .long   trap        /* Level 4 Interrupt Autovector                 - 28. */
-    .long   trap        /* Level 5 Interrupt Autovector                 - 29. */
-    .long   trap        /* Level 6 Interrupt Autovector                 - 30. */
-    .long   trap        /* Level 7 Interrupt Autovector                 - 31. */
-    .long   system_call /* Trap Instruction Vectors 0                   - 32. */
-    .long   trap        /* Trap Instruction Vectors 1                   - 33. */
-    .long   trap        /* Trap Instruction Vectors 2                   - 34. */
-    .long   trap        /* Trap Instruction Vectors 3                   - 35. */
-    .long   trap        /* Trap Instruction Vectors 4                   - 36. */
-    .long   trap        /* Trap Instruction Vectors 5                   - 37. */
-    .long   trap        /* Trap Instruction Vectors 6                   - 38. */
-    .long   trap        /* Trap Instruction Vectors 7                   - 39. */
-    .long   trap        /* Trap Instruction Vectors 8                   - 40. */
-    .long   trap        /* Trap Instruction Vectors 9                   - 41. */
-    .long   trap        /* Trap Instruction Vectors 10                  - 42. */
-    .long   trap        /* Trap Instruction Vectors 11                  - 43. */
-    .long   trap        /* Trap Instruction Vectors 12                  - 44. */
-    .long   trap        /* Trap Instruction Vectors 13                  - 45. */
-    .long   trap        /* Trap Instruction Vectors 14                  - 46. */
-    .long   trap        /* Trap Instruction Vectors 15                  - 47. */
-    .long   0           /* (Reserved for Coprocessor)                   - 48. */
-    .long   0           /* (Reserved for Coprocessor)                   - 49. */
-    .long   0           /* (Reserved for Coprocessor)                   - 50. */
-    .long   0           /* (Reserved for Coprocessor)                   - 51. */
-    .long   0           /* (Reserved for Coprocessor)                   - 52. */
-    .long   0           /* (Reserved for Coprocessor)                   - 53. */
-    .long   0           /* (Reserved for Coprocessor)                   - 54. */
-    .long   0           /* (Reserved for Coprocessor)                   - 55. */
-    .long   0           /* (Reserved for Coprocessor)                   - 56. */
-    .long   0           /* (Reserved for Coprocessor)                   - 57. */
-    .long   0           /* (Reserved for Coprocessor)                   - 58. */
-    .long   0           /* (Unassigned, Reserved)                       - 59. */
-    .long   0           /* (Unassigned, Reserved)                       - 60. */
-    .long   0           /* (Unassigned, Reserved)                       - 61. */
-    .long   0           /* (Unassigned, Reserved)                       - 62. */
-    .long   0           /* (Unassigned, Reserved)                       - 63. */
-    /*                  The assignment of these vectors to the CPM is         */
-    /*                  dependent on the configuration of the CPM vba         */
-    /*                          fields.                                       */
-    .long   0           /* (User-Defined Vectors 1) CPM Error           - 64. */
-    .long   0           /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
-    .long   0           /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
-    .long   0           /* (User-Defined Vectors 4) CPM SMC2 / PIP      - 67. */
-    .long   0           /* (User-Defined Vectors 5) CPM SMC1            - 68. */
-    .long   0           /* (User-Defined Vectors 6) CPM SPI             - 69. */
-    .long   0           /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
-    .long   0           /* (User-Defined Vectors 8) CPM Timer 4         - 71. */
-    .long   0           /* (User-Defined Vectors 9) CPM Reserved        - 72. */
-    .long   0           /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
-    .long   0           /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
-    .long   0           /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
-    .long   0           /* (User-Defined Vectors 13) CPM Timer 3        - 76. */
-    .long   0           /* (User-Defined Vectors 14) CPM Reserved       - 77. */
-    .long   0           /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
-    .long   0           /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
-    .long   0           /* (User-Defined Vectors 17) CPM Reserved       - 80. */
-    .long   0           /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
-    .long   0           /* (User-Defined Vectors 19) CPM Timer 2        - 82. */
-    .long   0           /* (User-Defined Vectors 21) CPM Reserved       - 83. */
-    .long   0           /* (User-Defined Vectors 22) CPM IDMA2          - 84. */
-    .long   0           /* (User-Defined Vectors 23) CPM IDMA1          - 85. */
-    .long   0           /* (User-Defined Vectors 24) CPM SDMA Bus Err   - 86. */
-    .long   0           /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
-    .long   0           /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
-    .long   0           /* (User-Defined Vectors 27) CPM Timer 1        - 89. */
-    .long   0           /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
-    .long   0           /* (User-Defined Vectors 29) CPM SCC 4          - 91. */
-    .long   0           /* (User-Defined Vectors 30) CPM SCC 3          - 92. */
-    .long   0           /* (User-Defined Vectors 31) CPM SCC 2          - 93. */
-    .long   0           /* (User-Defined Vectors 32) CPM SCC 1          - 94. */
-    .long   0           /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
-    /*                  I don't think anything uses the vectors after here.   */
-    .long   0           /* (User-Defined Vectors 34)                    - 96. */
-    .long   0,0,0,0,0               /* (User-Defined Vectors 35  -  39). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 40  -  49). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 50  -  59). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 60  -  69). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 70  -  79). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 80  -  89). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 90  -  99). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 100 - 109). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 110 - 119). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 120 - 129). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 130 - 139). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 140 - 149). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 150 - 159). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 160 - 169). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 170 - 179). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 180 - 189). */
-    .long   0,0,0                   /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte
diff --git a/arch/m68k/68360/head-rom.S b/arch/m68k/68360/head-rom.S
deleted file mode 100644
index b3a7e40f35e1..000000000000
--- a/arch/m68k/68360/head-rom.S
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * head-rom.S - startup code for Motorola 68360
- *
- * Copyright (C) SED Systems, a Division of Calian Ltd.
- * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
- * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
- *           uClinux Kernel
- * Copyright (C) Michael Leslie <mleslie@lineo.com>
- * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
- * Copyright (C) 1998  D. Jeff Dionne <jeff@uclinux.org>,
- *
- */
-
-.global _stext
-.global __bss_start
-.global _start
-
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-
-.global _quicc_base
-.global _periph_base
-
-#define	RAMEND                      (CONFIG_RAMBASE + CONFIG_RAMSIZE)
-
-#define REGB                        0x1000
-#define PEPAR                       (_dprbase + REGB + 0x0016)
-#define GMR                         (_dprbase + REGB + 0x0040)
-#define OR0                         (_dprbase + REGB + 0x0054)
-#define BR0                         (_dprbase + REGB + 0x0050)
-
-#define OR1                         (_dprbase + REGB + 0x0064)
-#define BR1                         (_dprbase + REGB + 0x0060)
-
-#define OR2                         (_dprbase + REGB + 0x0074)
-#define BR2                         (_dprbase + REGB + 0x0070)
-
-#define OR3                         (_dprbase + REGB + 0x0084)
-#define BR3                         (_dprbase + REGB + 0x0080)
-
-#define OR4                         (_dprbase + REGB + 0x0094)
-#define BR4                         (_dprbase + REGB + 0x0090)
-
-#define OR5                         (_dprbase + REGB + 0x00A4)
-#define BR5                         (_dprbase + REGB + 0x00A0)
-
-#define OR6                         (_dprbase + REGB + 0x00b4)
-#define BR6                         (_dprbase + REGB + 0x00b0)
-
-#define OR7                         (_dprbase + REGB + 0x00c4)
-#define BR7                         (_dprbase + REGB + 0x00c0)
-
-#define MCR                         (_dprbase + REGB + 0x0000)
-#define AVR                         (_dprbase + REGB + 0x0008)
-
-#define SYPCR                       (_dprbase + REGB + 0x0022)
-
-#define PLLCR                       (_dprbase + REGB + 0x0010)
-#define CLKOCR                      (_dprbase + REGB + 0x000C)
-#define CDVCR                       (_dprbase + REGB + 0x0014)
-
-#define BKAR                        (_dprbase + REGB + 0x0030)
-#define BKCR                        (_dprbase + REGB + 0x0034)
-#define SWIV                        (_dprbase + REGB + 0x0023)
-#define PICR                        (_dprbase + REGB + 0x0026)
-#define PITR                        (_dprbase + REGB + 0x002A)
-
-/* Define for all memory configuration */
-#define MCU_SIM_GMR                 0x00000000
-#define SIM_OR_MASK                 0x0fffffff
-
-/* Defines for chip select zero - the flash */
-#define SIM_OR0_MASK                0x20000000
-#define SIM_BR0_MASK                0x00000001
-
-/* Defines for chip select one - the RAM */
-#define SIM_OR1_MASK                0x10000000
-#define SIM_BR1_MASK                0x00000001
-
-#define MCU_SIM_MBAR_ADRS           0x0003ff00
-#define MCU_SIM_MBAR_BA_MASK        0xfffff000
-#define MCU_SIM_MBAR_AS_MASK        0x00000001
-
-#define MCU_SIM_PEPAR               0x00B4
-    
-#define MCU_DISABLE_INTRPTS         0x2700
-#define MCU_SIM_AVR                 0x00
-    
-#define MCU_SIM_MCR                 0x00005cff
-
-#define MCU_SIM_CLKOCR              0x00
-#define MCU_SIM_PLLCR               0x8000
-#define MCU_SIM_CDVCR               0x0000
-
-#define MCU_SIM_SYPCR               0x0000
-#define MCU_SIM_SWIV                0x00
-#define MCU_SIM_PICR                0x0000
-#define MCU_SIM_PITR                0x0000
-
-
-#include <asm/m68360_regs.h>
-
-	
-/*
- * By the time this RAM specific code begins to execute, DPRAM
- * and DRAM should already be mapped and accessible.
- */
-
-	.text
-_start:
-_stext:
-	nop
-	ori.w	#MCU_DISABLE_INTRPTS, %sr	/* disable interrupts: */
-	/* We should not need to setup the boot stack the reset should do it. */
-	movea.l	#RAMEND, %sp		/* set up stack at the end of DRAM:*/
-
-
-set_mbar_register:
-	moveq.l	#0x07, %d1			/* Setup MBAR */
-	movec	%d1, %dfc
-
-	lea.l	MCU_SIM_MBAR_ADRS, %a0
-	move.l	#_dprbase, %d0
-	andi.l	#MCU_SIM_MBAR_BA_MASK, %d0
-	ori.l	#MCU_SIM_MBAR_AS_MASK, %d0
-	moves.l	%d0, %a0@
-
-	moveq.l	#0x05, %d1
-	movec.l	%d1, %dfc
-
-	/* Now we can begin to access registers in DPRAM */
-
-set_sim_mcr:
-	/* Set Module Configuration Register */
-	move.l	#MCU_SIM_MCR, MCR
-
-	/* to do:	Determine cause of reset */
-
-	/*
-	 *	configure system clock MC68360 p. 6-40
-	 *	(value +1)*osc/128 = system clock
-	 *                    or
-	 *	(value + 1)*osc = system clock
-	 *	You do not need to divide the oscillator by 128 unless you want to.
-	 */
-set_sim_clock:
-	move.w	#MCU_SIM_PLLCR, PLLCR
-	move.b	#MCU_SIM_CLKOCR, CLKOCR
-	move.w	#MCU_SIM_CDVCR, CDVCR
-
-	/* Wait for the PLL to settle */
-	move.w	#16384, %d0
-pll_settle_wait:
-	subi.w	#1, %d0
-	bne	pll_settle_wait
-
-	/* Setup the system protection register, and watchdog timer register */
-	move.b	#MCU_SIM_SWIV, SWIV
-	move.w	#MCU_SIM_PICR, PICR
-	move.w	#MCU_SIM_PITR, PITR
-	move.w	#MCU_SIM_SYPCR, SYPCR
-
-	/* Clear DPRAM - system + parameter */
-	movea.l	#_dprbase, %a0
-	movea.l	#_dprbase+0x2000, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-clear_dpram:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	clear_dpram
-
-configure_memory_controller:    
-	/* Set up Global Memory Register (GMR) */
-	move.l	#MCU_SIM_GMR, %d0
-	move.l	%d0, GMR
-
-configure_chip_select_0:
-	move.l	#0x00400000, %d0
-	subq.l	#0x01, %d0
-	eori.l	#SIM_OR_MASK, %d0
-	ori.l	#SIM_OR0_MASK, %d0
-	move.l	%d0, OR0
-
-	move.l	#__rom_start, %d0
-	ori.l	#SIM_BR0_MASK, %d0
-	move.l	%d0, BR0
-
-	move.l	#0x0, BR1
-	move.l	#0x0, BR2
-	move.l	#0x0, BR3
-	move.l	#0x0, BR4
-	move.l	#0x0, BR5
-	move.l	#0x0, BR6
-	move.l	#0x0, BR7
-
-	move.w	#MCU_SIM_PEPAR, PEPAR 
-
-	/* point to vector table: */
-	move.l	#_romvec, %a0
-	move.l	#_ramvec, %a1
-copy_vectors:
-	move.l	%a0@, %d0
-	move.l	%d0, %a1@
-	move.l	%a0@, %a1@
-	addq.l	#0x04, %a0
-	addq.l	#0x04, %a1
-	cmp.l	#_start, %a0
-	blt	copy_vectors
-
-	move.l	#_ramvec, %a1
-	movec	%a1, %vbr
-
-
-	/* Copy data segment from ROM to RAM */
-	moveal	#_etext, %a0
-	moveal	#_sdata, %a1
-	moveal	#_edata, %a2
-
-	/* Copy %a0 to %a1 until %a1 == %a2 */
-LD1:
-	move.l	%a0@, %d0
-	addq.l	#0x04, %a0
-	move.l	%d0, %a1@
-	addq.l	#0x04, %a1
-	cmp.l	#_edata, %a1
-	blt	LD1
-
-	moveal	#__bss_start, %a0
-	moveal	#__bss_stop, %a1
-
-	/* Copy 0 to %a0 until %a0 == %a1 */
-L1:
-	movel	#0, %a0@+
-	cmpal	%a0, %a1
-	bhi	L1
-
-load_quicc:
-	move.l	#_dprbase, _quicc_base
-
-store_ram_size:
-	/* Set ram size information */
-	move.l	#_sdata, _rambase
-	move.l	#__bss_stop, _ramstart
-	move.l	#RAMEND, %d0
-	sub.l	#0x1000, %d0			/* Reserve 4K for stack space.*/
-	move.l	%d0, _ramend			/* Different from RAMEND.*/
-
-	pea	0
-	pea	env
-	pea	%sp@(4)
-	pea	0
-
-	lea	init_thread_union, %a2
-	lea	0x2000(%a2), %sp
-
-lp:
-	jsr	start_kernel
-
-_exit:
-	jmp	_exit
-
-
-	.data
-	.align 4
-env:
-	.long	0
-_quicc_base:
-	.long	0
-_periph_base:
-	.long	0
-_ramvec:
-	.long   0
-_rambase:
-	.long   0
-_ramstart:
-	.long   0
-_ramend:
-	.long   0
-_dprbase:
-	.long	0xffffe000
-
-
-	.text
-
-    /*
-     * These are the exception vectors at boot up, they are copied into RAM
-     * and then overwritten as needed.
-     */
- 
-.section ".data..initvect","awx"
-    .long   RAMEND	/* Reset: Initial Stack Pointer                 - 0.  */
-    .long   _start      /* Reset: Initial Program Counter               - 1.  */
-    .long   buserr      /* Bus Error                                    - 2.  */
-    .long   trap        /* Address Error                                - 3.  */
-    .long   trap        /* Illegal Instruction                          - 4.  */
-    .long   trap        /* Divide by zero                               - 5.  */
-    .long   trap        /* CHK, CHK2 Instructions                       - 6.  */
-    .long   trap        /* TRAPcc, TRAPV Instructions                   - 7.  */
-    .long   trap        /* Privilege Violation                          - 8.  */
-    .long   trap        /* Trace                                        - 9.  */
-    .long   trap        /* Line 1010 Emulator                           - 10. */
-    .long   trap        /* Line 1111 Emualtor                           - 11. */
-    .long   trap        /* Harware Breakpoint                           - 12. */
-    .long   trap        /* (Reserved for Coprocessor Protocol Violation)- 13. */
-    .long   trap        /* Format Error                                 - 14. */
-    .long   trap        /* Uninitialized Interrupt                      - 15. */
-    .long   trap        /* (Unassigned, Reserver)                       - 16. */
-    .long   trap        /* (Unassigned, Reserver)                       - 17. */
-    .long   trap        /* (Unassigned, Reserver)                       - 18. */
-    .long   trap        /* (Unassigned, Reserver)                       - 19. */
-    .long   trap        /* (Unassigned, Reserver)                       - 20. */
-    .long   trap        /* (Unassigned, Reserver)                       - 21. */
-    .long   trap        /* (Unassigned, Reserver)                       - 22. */
-    .long   trap        /* (Unassigned, Reserver)                       - 23. */
-    .long   trap        /* Spurious Interrupt                           - 24. */
-    .long   trap        /* Level 1 Interrupt Autovector                 - 25. */
-    .long   trap        /* Level 2 Interrupt Autovector                 - 26. */
-    .long   trap        /* Level 3 Interrupt Autovector                 - 27. */
-    .long   trap        /* Level 4 Interrupt Autovector                 - 28. */
-    .long   trap        /* Level 5 Interrupt Autovector                 - 29. */
-    .long   trap        /* Level 6 Interrupt Autovector                 - 30. */
-    .long   trap        /* Level 7 Interrupt Autovector                 - 31. */
-    .long   system_call /* Trap Instruction Vectors 0                   - 32. */
-    .long   trap        /* Trap Instruction Vectors 1                   - 33. */
-    .long   trap        /* Trap Instruction Vectors 2                   - 34. */
-    .long   trap        /* Trap Instruction Vectors 3                   - 35. */
-    .long   trap        /* Trap Instruction Vectors 4                   - 36. */
-    .long   trap        /* Trap Instruction Vectors 5                   - 37. */
-    .long   trap        /* Trap Instruction Vectors 6                   - 38. */
-    .long   trap        /* Trap Instruction Vectors 7                   - 39. */
-    .long   trap        /* Trap Instruction Vectors 8                   - 40. */
-    .long   trap        /* Trap Instruction Vectors 9                   - 41. */
-    .long   trap        /* Trap Instruction Vectors 10                  - 42. */
-    .long   trap        /* Trap Instruction Vectors 11                  - 43. */
-    .long   trap        /* Trap Instruction Vectors 12                  - 44. */
-    .long   trap        /* Trap Instruction Vectors 13                  - 45. */
-    .long   trap        /* Trap Instruction Vectors 14                  - 46. */
-    .long   trap        /* Trap Instruction Vectors 15                  - 47. */
-    .long   0           /* (Reserved for Coprocessor)                   - 48. */
-    .long   0           /* (Reserved for Coprocessor)                   - 49. */
-    .long   0           /* (Reserved for Coprocessor)                   - 50. */
-    .long   0           /* (Reserved for Coprocessor)                   - 51. */
-    .long   0           /* (Reserved for Coprocessor)                   - 52. */
-    .long   0           /* (Reserved for Coprocessor)                   - 53. */
-    .long   0           /* (Reserved for Coprocessor)                   - 54. */
-    .long   0           /* (Reserved for Coprocessor)                   - 55. */
-    .long   0           /* (Reserved for Coprocessor)                   - 56. */
-    .long   0           /* (Reserved for Coprocessor)                   - 57. */
-    .long   0           /* (Reserved for Coprocessor)                   - 58. */
-    .long   0           /* (Unassigned, Reserved)                       - 59. */
-    .long   0           /* (Unassigned, Reserved)                       - 60. */
-    .long   0           /* (Unassigned, Reserved)                       - 61. */
-    .long   0           /* (Unassigned, Reserved)                       - 62. */
-    .long   0           /* (Unassigned, Reserved)                       - 63. */
-    /*                  The assignment of these vectors to the CPM is         */
-    /*                  dependent on the configuration of the CPM vba         */
-    /*                          fields.                                       */
-    .long   0           /* (User-Defined Vectors 1) CPM Error           - 64. */
-    .long   0           /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
-    .long   0           /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
-    .long   0           /* (User-Defined Vectors 4) CPM SMC2 / PIP      - 67. */
-    .long   0           /* (User-Defined Vectors 5) CPM SMC1            - 68. */
-    .long   0           /* (User-Defined Vectors 6) CPM SPI             - 69. */
-    .long   0           /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
-    .long   0           /* (User-Defined Vectors 8) CPM Timer 4         - 71. */
-    .long   0           /* (User-Defined Vectors 9) CPM Reserved        - 72. */
-    .long   0           /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
-    .long   0           /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
-    .long   0           /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
-    .long   0           /* (User-Defined Vectors 13) CPM Timer 3        - 76. */
-    .long   0           /* (User-Defined Vectors 14) CPM Reserved       - 77. */
-    .long   0           /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
-    .long   0           /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
-    .long   0           /* (User-Defined Vectors 17) CPM Reserved       - 80. */
-    .long   0           /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
-    .long   0           /* (User-Defined Vectors 19) CPM Timer 2        - 82. */
-    .long   0           /* (User-Defined Vectors 21) CPM Reserved       - 83. */
-    .long   0           /* (User-Defined Vectors 22) CPM IDMA2          - 84. */
-    .long   0           /* (User-Defined Vectors 23) CPM IDMA1          - 85. */
-    .long   0           /* (User-Defined Vectors 24) CPM SDMA Bus Err   - 86. */
-    .long   0           /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
-    .long   0           /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
-    .long   0           /* (User-Defined Vectors 27) CPM Timer 1        - 89. */
-    .long   0           /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
-    .long   0           /* (User-Defined Vectors 29) CPM SCC 4          - 91. */
-    .long   0           /* (User-Defined Vectors 30) CPM SCC 3          - 92. */
-    .long   0           /* (User-Defined Vectors 31) CPM SCC 2          - 93. */
-    .long   0           /* (User-Defined Vectors 32) CPM SCC 1          - 94. */
-    .long   0           /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
-    /*                  I don't think anything uses the vectors after here.   */
-    .long   0           /* (User-Defined Vectors 34)                    - 96. */
-    .long   0,0,0,0,0               /* (User-Defined Vectors 35  -  39). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 40  -  49). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 50  -  59). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 60  -  69). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 70  -  79). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 80  -  89). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 90  -  99). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 100 - 109). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 110 - 119). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 120 - 129). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 130 - 139). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 140 - 149). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 150 - 159). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 160 - 169). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 170 - 179). */
-    .long   0,0,0,0,0,0,0,0,0,0     /* (User-Defined Vectors 180 - 189). */
-    .long   0,0,0                   /* (User-Defined Vectors 190 - 192). */
-.text
-ignore: rte
diff --git a/arch/m68k/68360/ints.c b/arch/m68k/68360/ints.c
deleted file mode 100644
index 2360fc046681..000000000000
--- a/arch/m68k/68360/ints.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * ints.c - first level interrupt handlers
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000  Michael Leslie <mleslie@lineo.com>
- * Copyright (c) 1996 Roman Zippel
- * Copyright (c) 1999 D. Jeff Dionne <jeff@uclinux.org>
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/traps.h>
-#include <asm/machdep.h>
-#include <asm/m68360.h>
-
-/* from quicc/commproc.c: */
-extern QUICC *pquicc;
-extern void cpm_interrupt_init(void);
-
-#define INTERNAL_IRQS (96)
-
-/* assembler routines */
-asmlinkage void system_call(void);
-asmlinkage void buserr(void);
-asmlinkage void trap(void);
-asmlinkage void bad_interrupt(void);
-asmlinkage void inthandler(void);
-
-static void intc_irq_unmask(struct irq_data *d)
-{
-	pquicc->intr_cimr |= (1 << d->irq);
-}
-
-static void intc_irq_mask(struct irq_data *d)
-{
-	pquicc->intr_cimr &= ~(1 << d->irq);
-}
-
-static void intc_irq_ack(struct irq_data *d)
-{
-	pquicc->intr_cisr = (1 << d->irq);
-}
-
-static struct irq_chip intc_irq_chip = {
-	.name		= "M68K-INTC",
-	.irq_mask	= intc_irq_mask,
-	.irq_unmask	= intc_irq_unmask,
-	.irq_ack	= intc_irq_ack,
-};
-
-/*
- * This function should be called during kernel startup to initialize
- * the vector table.
- */
-void __init trap_init(void)
-{
-	int vba = (CPM_VECTOR_BASE<<4);
-
-	/* set up the vectors */
-	_ramvec[2] = buserr;
-	_ramvec[3] = trap;
-	_ramvec[4] = trap;
-	_ramvec[5] = trap;
-	_ramvec[6] = trap;
-	_ramvec[7] = trap;
-	_ramvec[8] = trap;
-	_ramvec[9] = trap;
-	_ramvec[10] = trap;
-	_ramvec[11] = trap;
-	_ramvec[12] = trap;
-	_ramvec[13] = trap;
-	_ramvec[14] = trap;
-	_ramvec[15] = trap;
-
-	_ramvec[32] = system_call;
-	_ramvec[33] = trap;
-
-	cpm_interrupt_init();
-
-	/* set up CICR for vector base address and irq level */
-	/* irl = 4, hp = 1f - see MC68360UM p 7-377 */
-	pquicc->intr_cicr = 0x00e49f00 | vba;
-
-	/* CPM interrupt vectors: (p 7-376) */
-	_ramvec[vba+CPMVEC_ERROR]       = bad_interrupt; /* Error */
-	_ramvec[vba+CPMVEC_PIO_PC11]    = inthandler;   /* pio - pc11 */
-	_ramvec[vba+CPMVEC_PIO_PC10]    = inthandler;   /* pio - pc10 */
-	_ramvec[vba+CPMVEC_SMC2]        = inthandler;   /* smc2/pip */
-	_ramvec[vba+CPMVEC_SMC1]        = inthandler;   /* smc1 */
-	_ramvec[vba+CPMVEC_SPI]         = inthandler;   /* spi */
-	_ramvec[vba+CPMVEC_PIO_PC9]     = inthandler;   /* pio - pc9 */
-	_ramvec[vba+CPMVEC_TIMER4]      = inthandler;   /* timer 4 */
-	_ramvec[vba+CPMVEC_RESERVED1]   = inthandler;   /* reserved */
-	_ramvec[vba+CPMVEC_PIO_PC8]     = inthandler;   /* pio - pc8 */
-	_ramvec[vba+CPMVEC_PIO_PC7]     = inthandler;  /* pio - pc7 */
-	_ramvec[vba+CPMVEC_PIO_PC6]     = inthandler;  /* pio - pc6 */
-	_ramvec[vba+CPMVEC_TIMER3]      = inthandler;  /* timer 3 */
-	_ramvec[vba+CPMVEC_PIO_PC5]     = inthandler;  /* pio - pc5 */
-	_ramvec[vba+CPMVEC_PIO_PC4]     = inthandler;  /* pio - pc4 */
-	_ramvec[vba+CPMVEC_RESERVED2]   = inthandler;  /* reserved */
-	_ramvec[vba+CPMVEC_RISCTIMER]   = inthandler;  /* timer table */
-	_ramvec[vba+CPMVEC_TIMER2]      = inthandler;  /* timer 2 */
-	_ramvec[vba+CPMVEC_RESERVED3]   = inthandler;  /* reserved */
-	_ramvec[vba+CPMVEC_IDMA2]       = inthandler;  /* idma 2 */
-	_ramvec[vba+CPMVEC_IDMA1]       = inthandler;  /* idma 1 */
-	_ramvec[vba+CPMVEC_SDMA_CB_ERR] = inthandler;  /* sdma channel bus error */
-	_ramvec[vba+CPMVEC_PIO_PC3]     = inthandler;  /* pio - pc3 */
-	_ramvec[vba+CPMVEC_PIO_PC2]     = inthandler;  /* pio - pc2 */
-	/* _ramvec[vba+CPMVEC_TIMER1]      = cpm_isr_timer1; */  /* timer 1 */
-	_ramvec[vba+CPMVEC_TIMER1]      = inthandler;  /* timer 1 */
-	_ramvec[vba+CPMVEC_PIO_PC1]     = inthandler;  /* pio - pc1 */
-	_ramvec[vba+CPMVEC_SCC4]        = inthandler;  /* scc 4 */
-	_ramvec[vba+CPMVEC_SCC3]        = inthandler;  /* scc 3 */
-	_ramvec[vba+CPMVEC_SCC2]        = inthandler;  /* scc 2 */
-	_ramvec[vba+CPMVEC_SCC1]        = inthandler;  /* scc 1 */
-	_ramvec[vba+CPMVEC_PIO_PC0]     = inthandler;  /* pio - pc0 */
-
-
-	/* turn off all CPM interrupts */
-	pquicc->intr_cimr = 0x00000000;
-}
-
-void init_IRQ(void)
-{
-	int i;
-
-	for (i = 0; (i < NR_IRQS); i++) {
-		irq_set_chip(i, &intc_irq_chip);
-		irq_set_handler(i, handle_level_irq);
-	}
-}
-
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index c496d48a8c8d..0dfcf1281e9c 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -114,13 +114,6 @@ config M68VZ328
 	help
 	  Motorola 68VZ328 processor support.
 
-config M68360
-	bool "MC68360"
-	depends on !MMU
-	select MCPU32
-	help
-	  Motorola 68360 processor support.
-
 endif # M68KCLASSIC
 
 if COLDFIRE
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug
index 64776d7ac199..50a67d08aec4 100644
--- a/arch/m68k/Kconfig.debug
+++ b/arch/m68k/Kconfig.debug
@@ -12,7 +12,7 @@ config BOOTPARAM_STRING
 
 config EARLY_PRINTK
 	bool "Early printk"
-	depends on !(SUN3 || M68360 || M68000 || COLDFIRE)
+	depends on !(SUN3 || M68000 || COLDFIRE)
 	help
           Write kernel log output directly to a serial port.
           Where implemented, output goes to the framebuffer as well.
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 61dc643c0b05..2a5c7abb2896 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -187,12 +187,6 @@ config MEMORY_RESERVE
 	help
 	  Reserve certain memory regions on 68x328 based boards.
 
-config UCQUICC
-	bool "Lineo uCquicc board support"
-	depends on M68360
-	help
-	  Support for the Lineo uCquicc board.
-
 config ARN5206
 	bool "Arnewsh 5206 board support"
 	depends on M5206
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 0b29dcfef69f..f0dd9fc84002 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -39,7 +39,6 @@ cpuflags-$(CONFIG_M68040)	:= -m68040
 endif
 cpuflags-$(CONFIG_M68030)	:=
 cpuflags-$(CONFIG_M68020)	:=
-cpuflags-$(CONFIG_M68360)	:= -m68332
 cpuflags-$(CONFIG_M68000)	:= -m68000
 cpuflags-$(CONFIG_M5441x)	:= $(call cc-option,-mcpu=54455,-mcfv4e)
 cpuflags-$(CONFIG_M54xx)	:= $(call cc-option,-mcpu=5475,-m5200)
@@ -92,7 +91,6 @@ endif
 #
 head-y				:= arch/m68k/kernel/head.o
 head-$(CONFIG_SUN3)		:= arch/m68k/kernel/sun3-head.o
-head-$(CONFIG_M68360)		:= arch/m68k/68360/head.o
 head-$(CONFIG_M68000)		:= arch/m68k/68000/head.o
 head-$(CONFIG_COLDFIRE)		:= arch/m68k/coldfire/head.o
 
@@ -114,7 +112,6 @@ core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/
 core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
 core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
 core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
-core-$(CONFIG_M68360)		+= arch/m68k/68360/
 core-$(CONFIG_M68000)		+= arch/m68k/68000/
 core-$(CONFIG_COLDFIRE)		+= arch/m68k/coldfire/
 
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 192b00f098f4..cbd5991fd49a 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -858,7 +858,7 @@ static struct platform_device *atari_netusbee_devices[] __initdata = {
 };
 #endif /* CONFIG_ATARI_ETHERNEC */
 
-#ifdef CONFIG_ATARI_SCSI
+#if IS_ENABLED(CONFIG_ATARI_SCSI)
 static const struct resource atari_scsi_st_rsrc[] __initconst = {
 	{
 		.flags = IORESOURCE_IRQ,
@@ -910,7 +910,7 @@ int __init atari_platform_init(void)
 	}
 #endif
 
-#ifdef CONFIG_ATARI_SCSI
+#if IS_ENABLED(CONFIG_ATARI_SCSI)
 	if (ATARIHW_PRESENT(ST_SCSI))
 		platform_device_register_simple("atari_scsi", -1,
 			atari_scsi_st_rsrc, ARRAY_SIZE(atari_scsi_st_rsrc));
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
index 71ea4c02795d..a0fc0c192427 100644
--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -89,7 +89,7 @@ static struct platform_device mcf_uart = {
 	.dev.platform_data	= mcf_uart_platform_data,
 };
 
-#ifdef CONFIG_FEC
+#if IS_ENABLED(CONFIG_FEC)
 
 #ifdef CONFIG_M5441x
 #define FEC_NAME	"enet-fec"
@@ -329,7 +329,7 @@ static struct platform_device mcf_qspi = {
 
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
-#ifdef CONFIG_FEC
+#if IS_ENABLED(CONFIG_FEC)
 	&mcf_fec0,
 #ifdef MCFFEC_BASE1
 	&mcf_fec1,
diff --git a/arch/m68k/coldfire/gpio.c b/arch/m68k/coldfire/gpio.c
index e7e428681ec5..b515809be2b9 100644
--- a/arch/m68k/coldfire/gpio.c
+++ b/arch/m68k/coldfire/gpio.c
@@ -121,7 +121,7 @@ static int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset)
 
 static int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset)
 {
-	return __mcfgpio_get_value(offset);
+	return !!__mcfgpio_get_value(offset);
 }
 
 static int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset,
@@ -158,11 +158,6 @@ static int mcfgpio_to_irq(struct gpio_chip *chip, unsigned offset)
 		return -EINVAL;
 }
 
-static struct bus_type mcfgpio_subsys = {
-	.name		= "gpio",
-	.dev_name	= "gpio",
-};
-
 static struct gpio_chip mcfgpio_chip = {
 	.label			= "mcfgpio",
 	.request		= mcfgpio_request,
@@ -178,8 +173,7 @@ static struct gpio_chip mcfgpio_chip = {
 
 static int __init mcfgpio_sysinit(void)
 {
-	gpiochip_add(&mcfgpio_chip);
-	return subsys_system_register(&mcfgpio_subsys, NULL);
+	return gpiochip_add_data(&mcfgpio_chip, NULL);
 }
 
 core_initcall(mcfgpio_sysinit);
diff --git a/arch/m68k/coldfire/m54xx.c b/arch/m68k/coldfire/m54xx.c
index f7836c6a6b60..c32f76791f48 100644
--- a/arch/m68k/coldfire/m54xx.c
+++ b/arch/m68k/coldfire/m54xx.c
@@ -98,7 +98,7 @@ static void __init mcf54xx_bootmem_alloc(void)
 	memstart = PAGE_ALIGN(_ramstart);
 	min_low_pfn = PFN_DOWN(_rambase);
 	start_pfn = PFN_DOWN(memstart);
-	max_low_pfn = PFN_DOWN(_ramend);
+	max_pfn = max_low_pfn = PFN_DOWN(_ramend);
 	high_memory = (void *)_ramend;
 
 	m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 5b4ec541ba7c..3ee6976f6088 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-amiga"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -64,7 +63,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -108,6 +106,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -266,6 +266,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -276,7 +282,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -350,6 +359,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -365,6 +375,7 @@ CONFIG_ARIADNE=y
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 CONFIG_HYDRA=y
 CONFIG_APNE=y
 CONFIG_ZORRO8390=y
@@ -442,6 +453,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -458,6 +470,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -532,11 +545,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -545,7 +561,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -553,12 +568,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -581,7 +594,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 6e5198e2c124..e96787ffcbce 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-apollo"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -106,6 +104,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -264,6 +264,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -274,7 +280,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -332,6 +341,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -343,6 +353,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -372,6 +383,7 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_SERIO=m
+CONFIG_USERIO=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_HW_RANDOM is not set
@@ -400,6 +412,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -416,6 +429,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -490,11 +504,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -503,7 +520,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -511,12 +527,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -539,7 +553,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index f75600b0ca23..083fe6beac14 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-atari"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -106,6 +104,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -264,6 +264,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -274,7 +280,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -341,6 +350,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -352,6 +362,7 @@ CONFIG_ATARILANCE=y
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
@@ -422,6 +433,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -438,6 +450,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -512,11 +525,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -525,7 +541,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -533,12 +548,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -561,7 +574,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index a42d91c389a6..475130c06dcb 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-bvme6000"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -104,6 +102,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -262,6 +262,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -272,7 +278,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -331,6 +340,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -342,6 +352,7 @@ CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -393,6 +404,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -409,6 +421,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -483,11 +496,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -496,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -504,12 +519,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -532,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 77f4a11083e9..4339658c200f 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-hp300"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -62,7 +61,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -106,6 +104,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -264,6 +264,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -274,7 +280,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -332,6 +341,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -344,6 +354,7 @@ CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -375,6 +386,7 @@ CONFIG_MOUSE_SERIAL=m
 CONFIG_INPUT_MISC=y
 CONFIG_HP_SDC_RTC=m
 CONFIG_SERIO_SERPORT=m
+CONFIG_USERIO=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_HW_RANDOM is not set
@@ -402,6 +414,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -418,6 +431,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -492,11 +506,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -505,7 +522,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -513,12 +529,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -541,7 +555,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 5a329f77329b..831cc8c3a2e2 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-mac"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -61,7 +60,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -105,6 +103,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -266,6 +266,12 @@ CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -276,7 +282,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -348,6 +357,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -361,6 +371,7 @@ CONFIG_MAC89x0=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_MACSONIC=y
+# CONFIG_NET_VENDOR_NETRONOME is not set
 CONFIG_MAC8390=y
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
@@ -394,6 +405,7 @@ CONFIG_MOUSE_SERIAL=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
 CONFIG_SERIO=m
+CONFIG_USERIO=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_PMACZILOG=y
@@ -424,6 +436,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -440,6 +453,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -514,11 +528,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -527,7 +544,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -535,12 +551,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -563,7 +577,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 83c80d2030ec..6377afeb522b 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-multi"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -71,7 +70,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -115,6 +113,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -276,6 +276,12 @@ CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -286,7 +292,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -381,6 +390,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -403,6 +413,7 @@ CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_MACSONIC=y
+# CONFIG_NET_VENDOR_NETRONOME is not set
 CONFIG_HYDRA=y
 CONFIG_MAC8390=y
 CONFIG_NE2000=y
@@ -449,6 +460,7 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
 CONFIG_HP_SDC_RTC=m
 CONFIG_SERIO_Q40KBD=y
+CONFIG_USERIO=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_PMACZILOG=y
@@ -504,6 +516,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -520,6 +533,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -594,11 +608,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -607,7 +624,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -615,12 +631,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -643,7 +657,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 6cb42c3bf5a2..4304b3d56262 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-mvme147"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -59,7 +58,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -103,6 +101,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -261,6 +261,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -271,7 +277,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -330,6 +339,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -342,6 +352,7 @@ CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -393,6 +404,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -409,6 +421,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -483,11 +496,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -496,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -504,12 +519,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -532,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index c7508c30330c..074bda4094ff 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-mvme16x"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -104,6 +102,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -262,6 +262,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -272,7 +278,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -331,6 +340,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -342,6 +352,7 @@ CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -393,6 +404,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -409,6 +421,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -483,11 +496,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -496,7 +512,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -504,12 +519,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -532,7 +545,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 64b71664a303..07b9fa8d7f2e 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-q40"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -60,7 +59,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -104,6 +102,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -262,6 +262,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -272,7 +278,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -337,6 +346,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -351,6 +361,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
@@ -385,6 +396,7 @@ CONFIG_MOUSE_SERIAL=m
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
 CONFIG_SERIO_Q40KBD=y
+CONFIG_USERIO=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_PRINTER=m
@@ -415,6 +427,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -431,6 +444,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -505,11 +519,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -518,7 +535,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -526,12 +542,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -554,7 +568,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 9a4cab78a2ea..36e6fae02d45 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-sun3"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -57,7 +56,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -101,6 +99,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -259,6 +259,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -269,7 +275,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -328,6 +337,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -339,6 +349,7 @@ CONFIG_SUN3_82586=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -369,6 +380,7 @@ CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
+CONFIG_USERIO=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_HW_RANDOM is not set
@@ -394,6 +406,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -410,6 +423,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -484,11 +498,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -496,7 +513,6 @@ CONFIG_TEST_BPF=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -504,12 +520,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -532,7 +546,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 1a2eaac13dbd..903acf929511 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,6 @@
 CONFIG_LOCALVERSION="-sun3x"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -57,7 +56,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
 CONFIG_IPV6=m
@@ -101,6 +99,8 @@ CONFIG_NFT_NAT=m
 CONFIG_NFT_QUEUE=m
 CONFIG_NFT_REJECT=m
 CONFIG_NFT_COMPAT=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -259,6 +259,12 @@ CONFIG_L2TP=m
 CONFIG_BRIDGE=m
 CONFIG_ATALK=m
 CONFIG_6LOWPAN=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m
+CONFIG_6LOWPAN_GHC_UDP=m
+CONFIG_6LOWPAN_GHC_ICMPV6=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m
+CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_BATMAN_ADV=m
 CONFIG_BATMAN_ADV_DAT=y
@@ -269,7 +275,10 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=m
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -328,6 +337,7 @@ CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
+CONFIG_MACSEC=m
 CONFIG_NETCONSOLE=m
 CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
@@ -340,6 +350,7 @@ CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_MARVELL is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
 # CONFIG_NET_VENDOR_QUALCOMM is not set
 # CONFIG_NET_VENDOR_RENESAS is not set
 # CONFIG_NET_VENDOR_ROCKER is not set
@@ -369,6 +380,7 @@ CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_MOUSE_SERIAL=m
+CONFIG_USERIO=m
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 # CONFIG_HW_RANDOM is not set
@@ -394,6 +406,7 @@ CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
+CONFIG_FS_ENCRYPTION=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
@@ -410,6 +423,7 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_CHILDREN=y
 CONFIG_TMPFS=y
+CONFIG_ORANGEFS_FS=m
 CONFIG_AFFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_ECRYPT_FS_MESSAGING=y
@@ -484,11 +498,14 @@ CONFIG_NLS_MAC_INUIT=m
 CONFIG_NLS_MAC_ROMANIAN=m
 CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
 CONFIG_TEST_KSTRTOX=m
+CONFIG_TEST_PRINTF=m
+CONFIG_TEST_BITMAP=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_LKM=m
 CONFIG_TEST_USER_COPY=m
@@ -497,7 +514,6 @@ CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_EARLY_PRINTK=y
-CONFIG_ENCRYPTED_KEYS=m
 CONFIG_CRYPTO_RSA=m
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_USER=m
@@ -505,12 +521,10 @@ CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_MCRYPTD=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_GCM=m
 CONFIG_CRYPTO_CHACHA20POLY1305=m
-CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_KEYWRAP=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -533,7 +547,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=m
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
index f2a00c591bf7..e9110b9b8bcd 100644
--- a/arch/m68k/emu/nfblock.c
+++ b/arch/m68k/emu/nfblock.c
@@ -59,7 +59,7 @@ struct nfhd_device {
 	struct gendisk *disk;
 };
 
-static void nfhd_make_request(struct request_queue *queue, struct bio *bio)
+static blk_qc_t nfhd_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct nfhd_device *dev = queue->queuedata;
 	struct bio_vec bvec;
@@ -77,6 +77,7 @@ static void nfhd_make_request(struct request_queue *queue, struct bio *bio)
 		sec += len;
 	}
 	bio_endio(bio);
+	return BLK_QC_T_NONE;
 }
 
 static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
index 4ebf098b8a1f..1a8080c4cc40 100644
--- a/arch/m68k/include/asm/MC68328.h
+++ b/arch/m68k/include/asm/MC68328.h
@@ -798,7 +798,7 @@
 
 /**********
  *
- * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
+ * 0xFFFFF7xx -- Serial Peripheral Interface Slave (SPIS)
  *
  **********/
 
@@ -824,7 +824,7 @@
 
 /**********
  *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
  *
  **********/
 
@@ -904,7 +904,7 @@
 
 #define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
 #define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divisor */
 #define UBAUD_DIVIDE_SHIFT	8
 #define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
 #define UBAUD_GPIOSRC		0x1000	/* GPIO source */
diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
index d1bde58ab0dd..fedac87c5d13 100644
--- a/arch/m68k/include/asm/MC68EZ328.h
+++ b/arch/m68k/include/asm/MC68EZ328.h
@@ -631,7 +631,7 @@
 
 /**********
  *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
  *
  **********/
 
@@ -712,7 +712,7 @@
 
 #define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
 #define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divisor */
 #define UBAUD_DIVIDE_SHIFT	8
 #define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
 #define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
@@ -1160,7 +1160,7 @@ typedef volatile struct {
 #define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
 #define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
 #define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_MASK		0x001f	/* Refresh Cycle */
 #define DRAMMC_REF_SHIFT	0
 
 /*
diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
index 6bd1bf1f85ea..34a51b2c784f 100644
--- a/arch/m68k/include/asm/MC68VZ328.h
+++ b/arch/m68k/include/asm/MC68VZ328.h
@@ -724,7 +724,7 @@
 
 /**********
  *
- * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ * 0xFFFFF8xx -- Serial Peripheral Interface Master (SPIM)
  *
  **********/
 
@@ -806,7 +806,7 @@
 
 #define UBAUD_PRESCALER_MASK	0x003f	/* Actual divisor is 65 - PRESCALER */
 #define UBAUD_PRESCALER_SHIFT	0
-#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_MASK	0x0700	/* Baud Rate freq. divisor */
 #define UBAUD_DIVIDE_SHIFT	8
 #define UBAUD_BAUD_SRC		0x0800	/* Baud Rate Source */
 #define UBAUD_UCLKDIR		0x2000	/* UCLK Direction */
@@ -1256,7 +1256,7 @@ typedef struct {
 #define DRAMMC_COL10		0x0080	/* Col address bit for MD10 PA11/PA0  */
 #define DRAMMC_COL9		0x0040	/* Col address bit for MD9  PA10/PA0  */
 #define DRAMMC_COL8		0x0020	/* Col address bit for MD8  PA9/PA0   */
-#define DRAMMC_REF_MASK		0x001f	/* Reresh Cycle */
+#define DRAMMC_REF_MASK		0x001f	/* Refresh Cycle */
 #define DRAMMC_REF_SHIFT	0
 
 /*
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
index 2f88d867c711..75e91f03b178 100644
--- a/arch/m68k/include/asm/checksum.h
+++ b/arch/m68k/include/asm/checksum.h
@@ -117,7 +117,7 @@ static inline __sum16 ip_compute_csum(const void *buff, int len)
 #define _HAVE_ARCH_IPV6_CSUM
 static __inline__ __sum16
 csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum)
+		__u32 len, __u8 proto, __wsum sum)
 {
 	register unsigned long tmp;
 	__asm__("addl %2@,%0\n\t"
diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
deleted file mode 100644
index f41c96863e98..000000000000
--- a/arch/m68k/include/asm/commproc.h
+++ /dev/null
@@ -1,664 +0,0 @@
-
-/*
- * 68360 Communication Processor Module.
- * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
- * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
- *
- * This file contains structures and information for the communication
- * processor channels.  Some CPM control and status is available
- * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
- * This file is not a complete map of all of the 360 QUICC's capabilities
- *
- * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
- * bytes of the DP RAM and relocates the I2C parameter area to the
- * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
- * or other use.
- */
-#ifndef __CPM_360__
-#define __CPM_360__
-
-
-/* CPM Command register masks: */
-#define CPM_CR_RST	((ushort)0x8000)
-#define CPM_CR_OPCODE	((ushort)0x0f00)
-#define CPM_CR_CHAN	((ushort)0x00f0)
-#define CPM_CR_FLG	((ushort)0x0001)
-
-/* CPM Command set (opcodes): */
-#define CPM_CR_INIT_TRX		((ushort)0x0000)
-#define CPM_CR_INIT_RX		((ushort)0x0001)
-#define CPM_CR_INIT_TX		((ushort)0x0002)
-#define CPM_CR_HUNT_MODE	((ushort)0x0003)
-#define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRSTOP_TX	((ushort)0x0005)
-#define CPM_CR_RESTART_TX	((ushort)0x0006)
-#define CPM_CR_CLOSE_RXBD	((ushort)0x0007)
-#define CPM_CR_SET_GADDR	((ushort)0x0008)
-#define CPM_CR_GCI_TIMEOUT	((ushort)0x0009)
-#define CPM_CR_GCI_ABORT	((ushort)0x000a)
-#define CPM_CR_RESET_BCS	((ushort)0x000a)
-
-/* CPM Channel numbers. */
-#define CPM_CR_CH_SCC1	((ushort)0x0000)
-#define CPM_CR_CH_SCC2	((ushort)0x0004)
-#define CPM_CR_CH_SPI	((ushort)0x0005)	/* SPI / Timers */
-#define CPM_CR_CH_TMR	((ushort)0x0005)
-#define CPM_CR_CH_SCC3	((ushort)0x0008)
-#define CPM_CR_CH_SMC1	((ushort)0x0009)	/* SMC1 / IDMA1 */
-#define CPM_CR_CH_IDMA1	((ushort)0x0009)
-#define CPM_CR_CH_SCC4	((ushort)0x000c)
-#define CPM_CR_CH_SMC2	((ushort)0x000d)	/* SMC2 / IDMA2 */
-#define CPM_CR_CH_IDMA2	((ushort)0x000d)
-
-
-#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
-
-#if 1 /* mleslie: I dinna think we have any such restrictions on
-       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
-
-/* The dual ported RAM is multi-functional.  Some areas can be (and are
- * being) used for microcode.  There is an area that can only be used
- * as data ram for buffer descriptors, which is all we use right now.
- * Currently the first 512 and last 256 bytes are used for microcode.
- */
-/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
-#define CPM_DATAONLY_BASE	((uint)0x0000)
-#define CPM_DATAONLY_SIZE	((uint)0x0800)
-#define CPM_DP_NOSPACE		((uint)0x7fffffff)
-
-#endif
-
-
-/* Export the base address of the communication processor registers
- * and dual port ram. */
-/* extern	cpm360_t	*cpmp; */		/* Pointer to comm processor */
-extern QUICC *pquicc;
-uint         m360_cpm_dpalloc(uint size);
-/* void         *m360_cpm_hostalloc(uint size); */
-void	      m360_cpm_setbrg(uint brg, uint rate);
-
-#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
-	ushort	cbd_sc;		/* Status and Control */
-	ushort	cbd_datlen;	/* Data length in buffer */
-	uint	cbd_bufaddr;	/* Buffer address in host memory */
-} cbd_t;
-#endif
-
-
-/* rx bd status/control bits */
-#define BD_SC_EMPTY	((ushort)0x8000)	/* Receive is empty */
-#define BD_SC_WRAP	((ushort)0x2000)	/* Last buffer descriptor in table */
-#define BD_SC_INTRPT	((ushort)0x1000)	/* Interrupt on change */
-#define BD_SC_LAST	((ushort)0x0800)	/* Last buffer in frame OR control char */
-
-#define BD_SC_FIRST	((ushort)0x0400)	/* 1st buffer in an HDLC frame */
-#define BD_SC_ADDR	((ushort)0x0400)	/* 1st byte is a multidrop address */
-
-#define BD_SC_CM	((ushort)0x0200)	/* Continuous mode */
-#define BD_SC_ID	((ushort)0x0100)	/* Received too many idles */
-
-#define BD_SC_AM	((ushort)0x0080)	/* Multidrop address match */
-#define BD_SC_DE	((ushort)0x0080)	/* DPLL Error (HDLC) */
-
-#define BD_SC_BR	((ushort)0x0020)	/* Break received */
-#define BD_SC_LG	((ushort)0x0020)	/* Frame length violation (HDLC) */
-
-#define BD_SC_FR	((ushort)0x0010)	/* Framing error */
-#define BD_SC_NO	((ushort)0x0010)	/* Nonoctet aligned frame (HDLC) */
-
-#define BD_SC_PR	((ushort)0x0008)	/* Parity error */
-#define BD_SC_AB	((ushort)0x0008)	/* Received abort Sequence (HDLC) */
-
-#define BD_SC_OV	((ushort)0x0002)	/* Overrun */
-#define BD_SC_CD	((ushort)0x0001)	/* Carrier Detect lost */
-
-/* tx bd status/control bits (as differ from rx bd) */
-#define BD_SC_READY	((ushort)0x8000)	/* Transmit is ready */
-#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
-#define BD_SC_P		((ushort)0x0100)	/* xmt preamble */
-#define BD_SC_UN	((ushort)0x0002)	/* Underrun */
-
-
-
-
-/* Parameter RAM offsets. */
-
-
-
-/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
- * In 2.0, we use a more structured C struct map of DPRAM, and so 
- * instead, we need only a parameter ram `slot'  */
-
-#define PRSLOT_SCC1	0
-#define PRSLOT_SCC2	1
-#define PRSLOT_SCC3	2
-#define PRSLOT_SMC1	2
-#define PRSLOT_SCC4	3
-#define PRSLOT_SMC2	3
-
-
-/* #define PROFF_SCC1	((uint)0x0000) */
-/* #define PROFF_SCC2	((uint)0x0100) */
-/* #define PROFF_SCC3	((uint)0x0200) */
-/* #define PROFF_SMC1	((uint)0x0280) */
-/* #define PROFF_SCC4	((uint)0x0300) */
-/* #define PROFF_SMC2	((uint)0x0380) */
-
-
-/* Define enough so I can at least use the serial port as a UART.
- * The MBX uses SMC1 as the host serial port.
- */
-typedef struct smc_uart {
-	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	smc_rfcr;	/* Rx function code */
-	u_char	smc_tfcr;	/* Tx function code */
-	ushort	smc_mrblr;	/* Max receive buffer length */
-	uint	smc_rstate;	/* Internal */
-	uint	smc_idp;	/* Internal */
-	ushort	smc_rbptr;	/* Internal */
-	ushort	smc_ibc;	/* Internal */
-	uint	smc_rxtmp;	/* Internal */
-	uint	smc_tstate;	/* Internal */
-	uint	smc_tdp;	/* Internal */
-	ushort	smc_tbptr;	/* Internal */
-	ushort	smc_tbc;	/* Internal */
-	uint	smc_txtmp;	/* Internal */
-	ushort	smc_maxidl;	/* Maximum idle characters */
-	ushort	smc_tmpidl;	/* Temporary idle counter */
-	ushort	smc_brklen;	/* Last received break length */
-	ushort	smc_brkec;	/* rcv'd break condition counter */
-	ushort	smc_brkcr;	/* xmt break count register */
-	ushort	smc_rmask;	/* Temporary bit mask */
-} smc_uart_t;
-
-/* Function code bits.
-*/
-#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
-
-/* SMC uart mode register.
-*/
-#define	SMCMR_REN	((ushort)0x0001)
-#define SMCMR_TEN	((ushort)0x0002)
-#define SMCMR_DM	((ushort)0x000c)
-#define SMCMR_SM_GCI	((ushort)0x0000)
-#define SMCMR_SM_UART	((ushort)0x0020)
-#define SMCMR_SM_TRANS	((ushort)0x0030)
-#define SMCMR_SM_MASK	((ushort)0x0030)
-#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
-#define SMCMR_REVD	SMCMR_PM_EVEN
-#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
-#define SMCMR_BS	SMCMR_PEN
-#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
-#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
-#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
-
-/* SMC2 as Centronics parallel printer.  It is half duplex, in that
- * it can only receive or transmit.  The parameter ram values for
- * each direction are either unique or properly overlap, so we can
- * include them in one structure.
- */
-typedef struct smc_centronics {
-	ushort	scent_rbase;
-	ushort	scent_tbase;
-	u_char	scent_cfcr;
-	u_char	scent_smask;
-	ushort	scent_mrblr;
-	uint	scent_rstate;
-	uint	scent_r_ptr;
-	ushort	scent_rbptr;
-	ushort	scent_r_cnt;
-	uint	scent_rtemp;
-	uint	scent_tstate;
-	uint	scent_t_ptr;
-	ushort	scent_tbptr;
-	ushort	scent_t_cnt;
-	uint	scent_ttemp;
-	ushort	scent_max_sl;
-	ushort	scent_sl_cnt;
-	ushort	scent_character1;
-	ushort	scent_character2;
-	ushort	scent_character3;
-	ushort	scent_character4;
-	ushort	scent_character5;
-	ushort	scent_character6;
-	ushort	scent_character7;
-	ushort	scent_character8;
-	ushort	scent_rccm;
-	ushort	scent_rccr;
-} smc_cent_t;
-
-/* Centronics Status Mask Register.
-*/
-#define SMC_CENT_F	((u_char)0x08)
-#define SMC_CENT_PE	((u_char)0x04)
-#define SMC_CENT_S	((u_char)0x02)
-
-/* SMC Event and Mask register.
-*/
-#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
-#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
-#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
-#define	SMCM_BSY	((unsigned char)0x04)
-#define	SMCM_TX		((unsigned char)0x02)
-#define	SMCM_RX		((unsigned char)0x01)
-
-/* Baud rate generators.
-*/
-#define CPM_BRG_RST		((uint)0x00020000)
-#define CPM_BRG_EN		((uint)0x00010000)
-#define CPM_BRG_EXTC_INT	((uint)0x00000000)
-#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
-#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
-#define CPM_BRG_ATB		((uint)0x00002000)
-#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
-#define CPM_BRG_DIV16		((uint)0x00000001)
-
-/* SCCs.
-*/
-#define SCC_GSMRH_IRP		((uint)0x00040000)
-#define SCC_GSMRH_GDE		((uint)0x00010000)
-#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
-#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
-#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
-#define SCC_GSMRH_REVD		((uint)0x00002000)
-#define SCC_GSMRH_TRX		((uint)0x00001000)
-#define SCC_GSMRH_TTX		((uint)0x00000800)
-#define SCC_GSMRH_CDP		((uint)0x00000400)
-#define SCC_GSMRH_CTSP		((uint)0x00000200)
-#define SCC_GSMRH_CDS		((uint)0x00000100)
-#define SCC_GSMRH_CTSS		((uint)0x00000080)
-#define SCC_GSMRH_TFL		((uint)0x00000040)
-#define SCC_GSMRH_RFW		((uint)0x00000020)
-#define SCC_GSMRH_TXSY		((uint)0x00000010)
-#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
-#define SCC_GSMRH_SYNL8		((uint)0x00000008)
-#define SCC_GSMRH_SYNL4		((uint)0x00000004)
-#define SCC_GSMRH_RTSM		((uint)0x00000002)
-#define SCC_GSMRH_RSYN		((uint)0x00000001)
-
-#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
-#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
-#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
-#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
-#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
-#define SCC_GSMRL_TCI		((uint)0x10000000)
-#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
-#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
-#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
-#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
-#define SCC_GSMRL_RINV		((uint)0x02000000)
-#define SCC_GSMRL_TINV		((uint)0x01000000)
-#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
-#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
-#define SCC_GSMRL_TPL_48	((uint)0x00800000)
-#define SCC_GSMRL_TPL_32	((uint)0x00600000)
-#define SCC_GSMRL_TPL_16	((uint)0x00400000)
-#define SCC_GSMRL_TPL_8		((uint)0x00200000)
-#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
-#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
-#define SCC_GSMRL_TPP_01	((uint)0x00100000)
-#define SCC_GSMRL_TPP_10	((uint)0x00080000)
-#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
-#define SCC_GSMRL_TEND		((uint)0x00040000)
-#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
-#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
-#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
-#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
-#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
-#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
-#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
-#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
-#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
-#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
-#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
-#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
-#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
-#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
-#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
-#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
-#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
-#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
-#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
-#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
-#define SCC_GSMRL_ENR		((uint)0x00000020)
-#define SCC_GSMRL_ENT		((uint)0x00000010)
-#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
-#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
-#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
-#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
-#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
-#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
-#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
-#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
-#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
-#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
-
-#define SCC_TODR_TOD		((ushort)0x8000)
-
-/* SCC Event and Mask register.
-*/
-#define	SCCM_TXE	((unsigned char)0x10)
-#define	SCCM_BSY	((unsigned char)0x04)
-#define	SCCM_TX		((unsigned char)0x02)
-#define	SCCM_RX		((unsigned char)0x01)
-
-typedef struct scc_param {
-	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
-	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
-	u_char	scc_rfcr;	/* Rx function code */
-	u_char	scc_tfcr;	/* Tx function code */
-	ushort	scc_mrblr;	/* Max receive buffer length */
-	uint	scc_rstate;	/* Internal */
-	uint	scc_idp;	/* Internal */
-	ushort	scc_rbptr;	/* Internal */
-	ushort	scc_ibc;	/* Internal */
-	uint	scc_rxtmp;	/* Internal */
-	uint	scc_tstate;	/* Internal */
-	uint	scc_tdp;	/* Internal */
-	ushort	scc_tbptr;	/* Internal */
-	ushort	scc_tbc;	/* Internal */
-	uint	scc_txtmp;	/* Internal */
-	uint	scc_rcrc;	/* Internal */
-	uint	scc_tcrc;	/* Internal */
-} sccp_t;
-
-
-/* Function code bits.
- */
-#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
-#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
-
-/* CPM Ethernet through SCC1.
- */
-typedef struct scc_enet {
-	sccp_t	sen_genscc;
-	uint	sen_cpres;	/* Preset CRC */
-	uint	sen_cmask;	/* Constant mask for CRC */
-	uint	sen_crcec;	/* CRC Error counter */
-	uint	sen_alec;	/* alignment error counter */
-	uint	sen_disfc;	/* discard frame counter */
-	ushort	sen_pads;	/* Tx short frame pad character */
-	ushort	sen_retlim;	/* Retry limit threshold */
-	ushort	sen_retcnt;	/* Retry limit counter */
-	ushort	sen_maxflr;	/* maximum frame length register */
-	ushort	sen_minflr;	/* minimum frame length register */
-	ushort	sen_maxd1;	/* maximum DMA1 length */
-	ushort	sen_maxd2;	/* maximum DMA2 length */
-	ushort	sen_maxd;	/* Rx max DMA */
-	ushort	sen_dmacnt;	/* Rx DMA counter */
-	ushort	sen_maxb;	/* Max BD byte count */
-	ushort	sen_gaddr1;	/* Group address filter */
-	ushort	sen_gaddr2;
-	ushort	sen_gaddr3;
-	ushort	sen_gaddr4;
-	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf0rba;	/* Internal */
-	uint	sen_tbuf0crc;	/* Internal */
-	ushort	sen_tbuf0bcnt;	/* Internal */
-	ushort	sen_paddrh;	/* physical address (MSB) */
-	ushort	sen_paddrm;
-	ushort	sen_paddrl;	/* physical address (LSB) */
-	ushort	sen_pper;	/* persistence */
-	ushort	sen_rfbdptr;	/* Rx first BD pointer */
-	ushort	sen_tfbdptr;	/* Tx first BD pointer */
-	ushort	sen_tlbdptr;	/* Tx last BD pointer */
-	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
-	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
-	uint	sen_tbuf1rba;	/* Internal */
-	uint	sen_tbuf1crc;	/* Internal */
-	ushort	sen_tbuf1bcnt;	/* Internal */
-	ushort	sen_txlen;	/* Tx Frame length counter */
-	ushort	sen_iaddr1;	/* Individual address filter */
-	ushort	sen_iaddr2;
-	ushort	sen_iaddr3;
-	ushort	sen_iaddr4;
-	ushort	sen_boffcnt;	/* Backoff counter */
-
-	/* NOTE: Some versions of the manual have the following items
-	 * incorrectly documented.  Below is the proper order.
-	 */
-	ushort	sen_taddrh;	/* temp address (MSB) */
-	ushort	sen_taddrm;
-	ushort	sen_taddrl;	/* temp address (LSB) */
-} scc_enet_t;
-
-
-
-#if defined (CONFIG_UCQUICC)
-/* uCquicc has the following signals connected to Ethernet:
- *  68360    - lxt905
- * PA0/RXD1  - rxd
- * PA1/TXD1  - txd
- * PA8/CLK1  - tclk
- * PA9/CLK2  - rclk
- * PC0/!RTS1 - t_en
- * PC1/!CTS1 - col
- * PC5/!CD1  - cd
- */
-#define PA_ENET_RXD	PA_RXD1
-#define PA_ENET_TXD	PA_TXD1
-#define PA_ENET_TCLK	PA_CLK1
-#define PA_ENET_RCLK	PA_CLK2
-#define PC_ENET_TENA	PC_RTS1
-#define PC_ENET_CLSN	PC_CTS1
-#define PC_ENET_RENA	PC_CD1
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-
-#endif /* config_ucquicc */
-
-
-#ifdef MBX
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
- * to the MBX860 board.  Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PC_ENET_TENA	((ushort)0x0001)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-#endif
-
-/* SCC Event register as used by Ethernet.
-*/
-#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
-#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
-#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
-#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
-#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
-#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
-
-/* SCC Mode Register (PMSR) as used by Ethernet.
-*/
-#define SCC_PMSR_HBC	((ushort)0x8000)	/* Enable heartbeat */
-#define SCC_PMSR_FC	((ushort)0x4000)	/* Force collision */
-#define SCC_PMSR_RSH	((ushort)0x2000)	/* Receive short frames */
-#define SCC_PMSR_IAM	((ushort)0x1000)	/* Check individual hash */
-#define SCC_PMSR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
-#define SCC_PMSR_PRO	((ushort)0x0200)	/* Promiscuous mode */
-#define SCC_PMSR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
-#define SCC_PMSR_SBT	((ushort)0x0080)	/* Special backoff timer */
-#define SCC_PMSR_LPB	((ushort)0x0040)	/* Set Loopback mode */
-#define SCC_PMSR_SIP	((ushort)0x0020)	/* Sample Input Pins */
-#define SCC_PMSR_LCW	((ushort)0x0010)	/* Late collision window */
-#define SCC_PMSR_NIB22	((ushort)0x000a)	/* Start frame search */
-#define SCC_PMSR_FDE	((ushort)0x0001)	/* Full duplex enable */
-
-/* Buffer descriptor control/status used by Ethernet receive.
-*/
-#define BD_ENET_RX_EMPTY	((ushort)0x8000)
-#define BD_ENET_RX_WRAP		((ushort)0x2000)
-#define BD_ENET_RX_INTR		((ushort)0x1000)
-#define BD_ENET_RX_LAST		((ushort)0x0800)
-#define BD_ENET_RX_FIRST	((ushort)0x0400)
-#define BD_ENET_RX_MISS		((ushort)0x0100)
-#define BD_ENET_RX_LG		((ushort)0x0020)
-#define BD_ENET_RX_NO		((ushort)0x0010)
-#define BD_ENET_RX_SH		((ushort)0x0008)
-#define BD_ENET_RX_CR		((ushort)0x0004)
-#define BD_ENET_RX_OV		((ushort)0x0002)
-#define BD_ENET_RX_CL		((ushort)0x0001)
-#define BD_ENET_RX_STATS	((ushort)0x013f)	/* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
-*/
-#define BD_ENET_TX_READY	((ushort)0x8000)
-#define BD_ENET_TX_PAD		((ushort)0x4000)
-#define BD_ENET_TX_WRAP		((ushort)0x2000)
-#define BD_ENET_TX_INTR		((ushort)0x1000)
-#define BD_ENET_TX_LAST		((ushort)0x0800)
-#define BD_ENET_TX_TC		((ushort)0x0400)
-#define BD_ENET_TX_DEF		((ushort)0x0200)
-#define BD_ENET_TX_HB		((ushort)0x0100)
-#define BD_ENET_TX_LC		((ushort)0x0080)
-#define BD_ENET_TX_RL		((ushort)0x0040)
-#define BD_ENET_TX_RCMASK	((ushort)0x003c)
-#define BD_ENET_TX_UN		((ushort)0x0002)
-#define BD_ENET_TX_CSL		((ushort)0x0001)
-#define BD_ENET_TX_STATS	((ushort)0x03ff)	/* All status bits */
-
-/* SCC as UART
-*/
-typedef struct scc_uart {
-	sccp_t	scc_genscc;
-	uint	scc_res1;	/* Reserved */
-	uint	scc_res2;	/* Reserved */
-	ushort	scc_maxidl;	/* Maximum idle chars */
-	ushort	scc_idlc;	/* temp idle counter */
-	ushort	scc_brkcr;	/* Break count register */
-	ushort	scc_parec;	/* receive parity error counter */
-	ushort	scc_frmec;	/* receive framing error counter */
-	ushort	scc_nosec;	/* receive noise counter */
-	ushort	scc_brkec;	/* receive break condition counter */
-	ushort	scc_brkln;	/* last received break length */
-	ushort	scc_uaddr1;	/* UART address character 1 */
-	ushort	scc_uaddr2;	/* UART address character 2 */
-	ushort	scc_rtemp;	/* Temp storage */
-	ushort	scc_toseq;	/* Transmit out of sequence char */
-	ushort	scc_char1;	/* control character 1 */
-	ushort	scc_char2;	/* control character 2 */
-	ushort	scc_char3;	/* control character 3 */
-	ushort	scc_char4;	/* control character 4 */
-	ushort	scc_char5;	/* control character 5 */
-	ushort	scc_char6;	/* control character 6 */
-	ushort	scc_char7;	/* control character 7 */
-	ushort	scc_char8;	/* control character 8 */
-	ushort	scc_rccm;	/* receive control character mask */
-	ushort	scc_rccr;	/* receive control character register */
-	ushort	scc_rlbc;	/* receive last break character */
-} scc_uart_t;
-
-/* SCC Event and Mask registers when it is used as a UART.
-*/
-#define UART_SCCM_GLR		((ushort)0x1000)
-#define UART_SCCM_GLT		((ushort)0x0800)
-#define UART_SCCM_AB		((ushort)0x0200)
-#define UART_SCCM_IDL		((ushort)0x0100)
-#define UART_SCCM_GRA		((ushort)0x0080)
-#define UART_SCCM_BRKE		((ushort)0x0040)
-#define UART_SCCM_BRKS		((ushort)0x0020)
-#define UART_SCCM_CCR		((ushort)0x0008)
-#define UART_SCCM_BSY		((ushort)0x0004)
-#define UART_SCCM_TX		((ushort)0x0002)
-#define UART_SCCM_RX		((ushort)0x0001)
-
-/* The SCC PMSR when used as a UART.
-*/
-#define SCU_PMSR_FLC		((ushort)0x8000)
-#define SCU_PMSR_SL		((ushort)0x4000)
-#define SCU_PMSR_CL		((ushort)0x3000)
-#define SCU_PMSR_UM		((ushort)0x0c00)
-#define SCU_PMSR_FRZ		((ushort)0x0200)
-#define SCU_PMSR_RZS		((ushort)0x0100)
-#define SCU_PMSR_SYN		((ushort)0x0080)
-#define SCU_PMSR_DRT		((ushort)0x0040)
-#define SCU_PMSR_PEN		((ushort)0x0010)
-#define SCU_PMSR_RPM		((ushort)0x000c)
-#define SCU_PMSR_REVP		((ushort)0x0008)
-#define SCU_PMSR_TPM		((ushort)0x0003)
-#define SCU_PMSR_TEVP		((ushort)0x0003)
-
-/* CPM Transparent mode SCC.
- */
-typedef struct scc_trans {
-	sccp_t	st_genscc;
-	uint	st_cpres;	/* Preset CRC */
-	uint	st_cmask;	/* Constant mask for CRC */
-} scc_trans_t;
-
-#define BD_SCC_TX_LAST		((ushort)0x0800)
-
-
-
-/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
- * channels or devices.  All of these are presented to the PPC core
- * as a single interrupt.  The CPM interrupt handler dispatches its
- * own handlers, in a similar fashion to the PPC core handler.  We
- * use the table as defined in the manuals (i.e. no special high
- * priority and SCC1 == SCCa, etc...).
- */
-/* #define CPMVEC_NR		32 */
-/* #define	CPMVEC_PIO_PC15		((ushort)0x1f) */
-/* #define	CPMVEC_SCC1		((ushort)0x1e) */
-/* #define	CPMVEC_SCC2		((ushort)0x1d) */
-/* #define	CPMVEC_SCC3		((ushort)0x1c) */
-/* #define	CPMVEC_SCC4		((ushort)0x1b) */
-/* #define	CPMVEC_PIO_PC14		((ushort)0x1a) */
-/* #define	CPMVEC_TIMER1		((ushort)0x19) */
-/* #define	CPMVEC_PIO_PC13		((ushort)0x18) */
-/* #define	CPMVEC_PIO_PC12		((ushort)0x17) */
-/* #define	CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_I2C		((ushort)0x10) */
-/* #define	CPMVEC_PIO_PC11		((ushort)0x0f) */
-/* #define	CPMVEC_PIO_PC10		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define	CPMVEC_PIO_PC9		((ushort)0x0b) */
-/* #define	CPMVEC_PIO_PC8		((ushort)0x0a) */
-/* #define	CPMVEC_PIO_PC7		((ushort)0x09) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define	CPMVEC_PIO_PC6		((ushort)0x06) */
-/* #define	CPMVEC_SPI		((ushort)0x05) */
-/* #define	CPMVEC_SMC1		((ushort)0x04) */
-/* #define	CPMVEC_SMC2		((ushort)0x03) */
-/* #define	CPMVEC_PIO_PC5		((ushort)0x02) */
-/* #define	CPMVEC_PIO_PC4		((ushort)0x01) */
-/* #define	CPMVEC_ERROR		((ushort)0x00) */
-
-extern void cpm_install_handler(int vec, irq_handler_t handler, void *dev_id);
-
-/* CPM interrupt configuration vector.
-*/
-#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
-#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
-#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
-#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
-#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
-#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
-#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
-#endif /* __CPM_360__ */
diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h
index 05aa53594d49..96c536194287 100644
--- a/arch/m68k/include/asm/dma-mapping.h
+++ b/arch/m68k/include/asm/dma-mapping.h
@@ -1,123 +1,17 @@
 #ifndef _M68K_DMA_MAPPING_H
 #define _M68K_DMA_MAPPING_H
 
-#include <asm/cache.h>
+extern struct dma_map_ops m68k_dma_ops;
 
-struct scatterlist;
-
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	return 0;
-}
-
-extern void *dma_alloc_coherent(struct device *, size_t,
-				dma_addr_t *, gfp_t);
-extern void dma_free_coherent(struct device *, size_t,
-			      void *, dma_addr_t);
-
-static inline void *dma_alloc_attrs(struct device *dev, size_t size,
-				    dma_addr_t *dma_handle, gfp_t flag,
-				    struct dma_attrs *attrs)
-{
-	/* attrs is not supported and ignored */
-	return dma_alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_attrs(struct device *dev, size_t size,
-				  void *cpu_addr, dma_addr_t dma_handle,
-				  struct dma_attrs *attrs)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	/* attrs is not supported and ignored */
-	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+        return &m68k_dma_ops;
 }
 
-static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
-					  dma_addr_t *handle, gfp_t flag)
-{
-	return dma_alloc_coherent(dev, size, handle, flag);
-}
-static inline void dma_free_noncoherent(struct device *dev, size_t size,
-					void *addr, dma_addr_t handle)
-{
-	dma_free_coherent(dev, size, addr, handle);
-}
 static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 				  enum dma_data_direction dir)
 {
 	/* we use coherent allocation, so not much to do here. */
 }
 
-extern dma_addr_t dma_map_single(struct device *, void *, size_t,
-				 enum dma_data_direction);
-static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
-				    size_t size, enum dma_data_direction dir)
-{
-}
-
-extern dma_addr_t dma_map_page(struct device *, struct page *,
-			       unsigned long, size_t size,
-			       enum dma_data_direction);
-static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
-				  size_t size, enum dma_data_direction dir)
-{
-}
-
-extern int dma_map_sg(struct device *, struct scatterlist *, int,
-		      enum dma_data_direction);
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries, enum dma_data_direction dir)
-{
-}
-
-extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
-				       enum dma_data_direction);
-extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
-				   enum dma_data_direction);
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
-					   size_t size, enum dma_data_direction dir)
-{
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				       int nents, enum dma_data_direction dir)
-{
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	/* just sync everything for now */
-	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
-{
-	return 0;
-}
-
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
 #endif  /* _M68K_DMA_MAPPING_H */
diff --git a/arch/m68k/include/asm/m54xxacr.h b/arch/m68k/include/asm/m54xxacr.h
index 6d13cae44af5..59e171063c2f 100644
--- a/arch/m68k/include/asm/m54xxacr.h
+++ b/arch/m68k/include/asm/m54xxacr.h
@@ -23,8 +23,8 @@
 #define CACR_IEC	0x00008000	/* Enable instruction cache */
 #define CACR_DNFB	0x00002000	/* Inhibited fill buffer */
 #define CACR_IDPI	0x00001000	/* Disable CPUSHL */
-#define CACR_IHLCK	0x00000800	/* Intruction cache half lock */
-#define CACR_IDCM	0x00000400	/* Intruction cache inhibit */
+#define CACR_IHLCK	0x00000800	/* Instruction cache half lock */
+#define CACR_IDCM	0x00000400	/* Instruction cache inhibit */
 #define CACR_ICINVA	0x00000100	/* Invalidate instr cache */
 #define CACR_EUSP	0x00000020	/* Enable separate user a7 */
 
diff --git a/arch/m68k/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h
deleted file mode 100644
index 4664180a3ab3..000000000000
--- a/arch/m68k/include/asm/m68360.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-#include <asm/m68360_quicc.h>
-#include <asm/m68360_enet.h>
-
-#ifdef CONFIG_M68360
-
-#define CPM_INTERRUPT    4
-
-/* see MC68360 User's Manual, p. 7-377  */
-#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
-
-#endif /* CONFIG_M68360 */
diff --git a/arch/m68k/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h
deleted file mode 100644
index 4d04037c78a2..000000000000
--- a/arch/m68k/include/asm/m68360_enet.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/***********************************
- * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions for the ETHERNET controllers
- ***************************************
- */
-
-#ifndef __ETHER_H
-#define __ETHER_H
-
-#include <asm/quicc_simple.h>
-
-/*
- * transmit BD's
- */
-#define T_R     0x8000          /* ready bit */
-#define E_T_PAD 0x4000          /* short frame padding */
-#define T_W     0x2000          /* wrap bit */
-#define T_I     0x1000          /* interrupt on completion */
-#define T_L     0x0800          /* last in frame */
-#define T_TC    0x0400          /* transmit CRC (when last) */
-
-#define T_DEF   0x0200          /* defer indication */
-#define T_HB    0x0100          /* heartbeat */
-#define T_LC    0x0080          /* error: late collision */
-#define T_RL    0x0040          /* error: retransmission limit */
-#define T_RC    0x003c          /* retry count */
-#define T_UN    0x0002          /* error: underrun */
-#define T_CSL   0x0001          /* carier sense lost */
-#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
-
-/*
- * receive BD's
- */
-#define R_E     0x8000          /* buffer empty */
-#define R_W     0x2000          /* wrap bit */
-#define R_I     0x1000          /* interrupt on reception */
-#define R_L     0x0800          /* last BD in frame */
-#define R_F     0x0400          /* first BD in frame */
-#define R_M     0x0100          /* received because of promisc. mode */
-
-#define R_LG    0x0020          /* frame too long */
-#define R_NO    0x0010          /* non-octet aligned */
-#define R_SH    0x0008          /* short frame */
-#define R_CR    0x0004          /* receive CRC error */
-#define R_OV    0x0002          /* receive overrun */
-#define R_CL    0x0001          /* collision */
-#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
-
-
-/*
- * ethernet interrupts
- */
-#define ETHERNET_GRA    0x0080  /* graceful stop complete */
-#define ETHERNET_TXE    0x0010  /* transmit error         */
-#define ETHERNET_RXF    0x0008  /* receive frame          */
-#define ETHERNET_BSY    0x0004  /* busy condition         */
-#define ETHERNET_TXB    0x0002  /* transmit buffer        */
-#define ETHERNET_RXB    0x0001  /* receive buffer         */
-
-/*
- * ethernet protocol specific mode register (PSMR)
- */
-#define ETHER_HBC       0x8000    /* heartbeat checking      */
-#define ETHER_FC        0x4000    /* force collision         */
-#define ETHER_RSH       0x2000    /* receive short frames    */
-#define ETHER_IAM       0x1000    /* individual address mode */
-#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
-#define ETHER_PRO       0x0200    /* promiscuous             */
-#define ETHER_BRO       0x0100    /* broadcast address       */
-#define ETHER_SBT       0x0080    /* stop backoff timer      */
-#define ETHER_LPB       0x0040    /* Loop Back Mode          */
-#define ETHER_SIP       0x0020    /* sample input pins       */
-#define ETHER_LCW       0x0010    /* late collision window   */
-#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
-#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
-#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
-#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
-#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
-#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
-#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
-#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
-
-/*
- * ethernet specific parameters
- */
-#define CRC_WORD 4          /* Length in bytes of CRC */               
-#define C_PRES   0xffffffff /* preform 32 bit CRC */
-#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
-#define CRCEC    0x00000000
-#define ALEC     0x00000000
-#define DISFC    0x00000000
-#define PADS     0x00000000
-#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
-#define ETH_MFLR 0x05ee     /* 1518 max frame size */
-#define MINFLR   0x0040     /* Minimum frame size 64 */
-#define MAXD1    0x05ee     /* Max dma count 1518 */
-#define MAXD2    0x05ee
-#define GADDR1   0x00000000 /* Clear group address */  
-#define GADDR2   0x00000000
-#define GADDR3   0x00000000    
-#define GADDR4   0x00000000    
-#define P_PER    0x00000000 /*not used */              
-#define IADDR1   0x00000000 /* Individual hash table not used */       
-#define IADDR2   0x00000000
-#define IADDR3   0x00000000    
-#define IADDR4   0x00000000            
-#define TADDR_H  0x00000000 /* clear this regs */              
-#define TADDR_M  0x00000000            
-#define TADDR_L  0x00000000            
-
-/*       SCC Parameter Ram */
-#define RFCR    0x18 /* normal operation */
-#define TFCR    0x18 /* normal operation */
-#define E_MRBLR 1518 /* Max ethernet frame length */
-
-/*
- * ethernet specific structure
- */
-typedef union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-} ETHER_ADDR;
-
-typedef struct {
-    int        max_frame_length;
-    int        promisc_mode;
-    int        reject_broadcast;
-    ETHER_ADDR phys_adr;
-} ETHER_SPECIFIC;
-
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[1];
-} ETHER_FRAME;
-
-#define MAX_DATALEN 1500
-typedef struct {
-    ETHER_ADDR     dst_addr;
-    ETHER_ADDR     src_addr;
-    unsigned short type_or_len;
-    unsigned char  data[MAX_DATALEN];
-    unsigned char  fcs[CRC_WORD];
-} ETHER_MAX_FRAME;
-
-
-/*
- * Internal ethernet function prototypes
- */
-void        ether_interrupt(int scc_num);
-/* mleslie: debug */
-/* static void ethernet_rx_internal(int scc_num); */
-/* static void ethernet_tx_internal(int scc_num); */
-
-/*
- * User callable routines prototypes (ethernet specific)
- */
-void ethernet_init(int                       scc_number,
-                   alloc_routine             *alloc_buffer,
-                   free_routine              *free_buffer,
-                   store_rx_buffer_routine   *store_rx_buffer,
-                   handle_tx_error_routine   *handle_tx_error,
-                   handle_rx_error_routine   *handle_rx_error,
-                   handle_lost_error_routine *handle_lost_error,
-                   ETHER_SPECIFIC            *ether_spec);
-int  ethernet_tx(int scc_number, void *buf, int length);
-
-#endif
-
diff --git a/arch/m68k/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h
deleted file mode 100644
index c0cbd96f09bc..000000000000
--- a/arch/m68k/include/asm/m68360_pram.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/***********************************
- * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the parameter area RAM.
- * Note that different structures are overlaid
- * at the same offsets for the different modes
- * of operation.
- ***************************************
- */
-
-#ifndef __PRAM_H
-#define __PRAM_H
-
-/* Time slot assignment table */
-#define VALID_SLOT	0x8000
-#define WRAP_SLOT	0x4000
-
-/*****************************************************************
-        Global Multichannel parameter RAM
-*****************************************************************/
-struct global_multi_pram {
-    /*
-     * Global Multichannel parameter RAM
-     */
-    unsigned long   mcbase;		/* Multichannel Base pointer */
-    unsigned short  qmcstate;		/* Multichannel Controller state */
-    unsigned short  mrblr;		/* Maximum Receive Buffer Length */
-    unsigned short  tx_s_ptr;		/* TSTATx Pointer */
-    unsigned short  rxptr;		/* Current Time slot entry in TSATRx */
-    unsigned short  grfthr;		/* Global Receive frame threshold */
-    unsigned short  grfcnt;		/* Global Receive Frame Count */
-    unsigned long   intbase;		/* Multichannel Base address */
-    unsigned long   iintptr;		/* Pointer to interrupt queue */
-    unsigned short  rx_s_ptr;		/* TSTARx Pointer */
-
-    unsigned short  txptr;		/* Current Time slot entry in TSATTx */
-    unsigned long   c_mask32;		/* CRC Constant (debb20e3) */
-    unsigned short  tsatrx[32];		/* Time Slot Assignment Table Rx */
-    unsigned short  tsattx[32];		/* Time Slot Assignment Table Tx */
-    unsigned short  c_mask16;		/* CRC Constant (f0b8) */
-};
-
-/*****************************************************************
-        Quicc32 HDLC parameter RAM
-*****************************************************************/
-struct quicc32_pram {
-
-    unsigned short  tbase;		/* Tx Buffer Descriptors Base Address */
-    unsigned short  chamr;		/* Channel Mode Register */
-    unsigned long   tstate;		/* Tx Internal State */
-    unsigned long   txintr;		/* Tx Internal Data Pointer */
-    unsigned short  tbptr;		/* Tx Buffer Descriptor Pointer */
-    unsigned short  txcntr;		/* Tx Internal Byte Count */
-    unsigned long   tupack;		/* (Tx Temp) */
-    unsigned long   zistate;		/* Zero Insertion machine state */
-    unsigned long   tcrc;		/* Temp Transmit CRC */
-    unsigned short  intmask;		/* Channel's interrupt mask flags */
-    unsigned short  bdflags;		
-    unsigned short  rbase;		/* Rx Buffer Descriptors Base Address */
-    unsigned short  mflr;		/* Max Frame Length Register */
-    unsigned long   rstate;		/* Rx Internal State */
-    unsigned long   rxintr;		/* Rx Internal Data Pointer */
-    unsigned short  rbptr;		/* Rx Buffer Descriptor Pointer */
-    unsigned short  rxbyc;		/* Rx Internal Byte Count */
-    unsigned long   rpack;		/* (Rx Temp) */
-    unsigned long   zdstate;		/* Zero Deletion machine state */
-    unsigned long   rcrc;		/* Temp Transmit CRC */
-    unsigned short  maxc;		/* Max_length counter */
-    unsigned short  tmp_mb;		/* Temp */
-};
-
-
-/*****************************************************************
-        HDLC parameter RAM
-*****************************************************************/
-
-struct hdlc_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * HDLC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   c_mask;         /* CRC constant */
-    unsigned long   c_pres;         /* CRC preset */
-    unsigned short  disfc;          /* discarded frame counter */
-    unsigned short  crcec;          /* CRC error counter */
-    unsigned short  abtsc;          /* abort sequence counter */
-    unsigned short  nmarc;          /* nonmatching address rx cnt */
-    unsigned short  retrc;          /* frame retransmission cnt */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  max_cnt;        /* maximum length counter */
-    unsigned short  rfthr;          /* received frames threshold */
-    unsigned short  rfcnt;          /* received frames count */
-    unsigned short  hmask;          /* user defined frm addr mask */
-    unsigned short  haddr1;         /* user defined frm address 1 */
-    unsigned short  haddr2;         /* user defined frm address 2 */
-    unsigned short  haddr3;         /* user defined frm address 3 */
-    unsigned short  haddr4;         /* user defined frm address 4 */
-    unsigned short  tmp;            /* temp */
-    unsigned short  tmp_mb;         /* temp */
-};
-
-
-
-/*****************************************************************
-        UART parameter RAM
-*****************************************************************/
-
-/*
- * bits in uart control characters table
- */
-#define CC_INVALID  0x8000          /* control character is valid */
-#define CC_REJ      0x4000          /* don't store char in buffer */
-#define CC_CHAR     0x00ff          /* control character */
-
-/* UART */
-struct uart_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rx_temp;        /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * UART specific parameter RAM
-     */
-    unsigned char   RESERVED1[8];   /* Reserved area */
-    unsigned short  max_idl;        /* maximum idle characters */
-    unsigned short  idlc;           /* rx idle counter (internal) */
-    unsigned short  brkcr;          /* break count register */
-                   
-    unsigned short  parec;          /* Rx parity error counter */
-    unsigned short  frmer;          /* Rx framing error counter */
-    unsigned short  nosec;          /* Rx noise counter */
-    unsigned short  brkec;          /* Rx break character counter */
-    unsigned short  brkln;          /* Receive break length */
-                   
-    unsigned short  uaddr1;         /* address character 1 */
-    unsigned short  uaddr2;         /* address character 2 */
-    unsigned short  rtemp;          /* temp storage */
-    unsigned short  toseq;          /* Tx out of sequence char */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Rx control char mask */
-    unsigned short  rccr;           /* Rx control char register */
-    unsigned short  rlbc;           /* Receive last break char */
-};
-
-
-
-/*****************************************************************
-        BISYNC parameter RAM
-*****************************************************************/
-
-struct bisync_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * BISYNC specific parameter RAM
-     */
-    unsigned char   RESERVED1[4];   /* Reserved area */
-    unsigned long   crcc;           /* CRC Constant Temp Value */
-    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
-    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
-    unsigned short  parec;          /* Receive Parity Error Counter */
-    unsigned short  bsync;          /* BISYNC SYNC Character */
-    unsigned short  bdle;           /* BISYNC DLE Character */
-    unsigned short  cc[8];          /* Rx control characters */
-    unsigned short  rccm;           /* Receive Control Character Mask */
-};
-
-/*****************************************************************
-        IOM2 parameter RAM
-        (overlaid on tx bd[5] of SCC channel[2])
-*****************************************************************/
-struct iom2_pram {
-    unsigned short  ci_data;        /* ci data */
-    unsigned short  monitor_data;   /* monitor data */
-    unsigned short  tstate;         /* transmitter state */
-    unsigned short  rstate;         /* receiver state */
-};
-
-/*****************************************************************
-        SPI/SMC parameter RAM
-        (overlaid on tx bd[6,7] of SCC channel[2])
-*****************************************************************/
-
-#define SPI_R       0x8000          /* Ready bit in BD */
-
-struct spi_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-};
-
-struct smc_uart_pram {
-    unsigned short  rbase;          /* Rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  max_idl;        /* Maximum IDLE Characters */
-    unsigned short  idlc;           /* Temporary IDLE Counter */
-    unsigned short  brkln;          /* Last Rx Break Length */
-    unsigned short  brkec;          /* Rx Break Condition Counter */
-    unsigned short  brkcr;          /* Break Count Register (Tx) */
-    unsigned short  r_mask;         /* Temporary bit mask */
-};
-
-struct smc_trnsp_pram {
-    unsigned short  rbase;          /* rx BD Base Address */
-    unsigned short  tbase;          /* Tx BD Base Address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned short  reserved[5];    /* Reserved */
-};
-
-struct idma_pram {
-    unsigned short  ibase;          /* IDMA BD Base Address */
-    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
-    unsigned long   istate;         /* IDMA internal state */
-    unsigned long   itemp;          /* IDMA temp */
-};
-
-struct ethernet_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * ETHERNET specific parameter RAM
-     */
-    unsigned long   c_pres;         /* preset CRC */
-    unsigned long   c_mask;         /* constant mask for CRC */
-    unsigned long   crcec;          /* CRC error counter */
-    unsigned long   alec;           /* alignment error counter */
-    unsigned long   disfc;          /* discard frame counter */
-    unsigned short  pads;           /* short frame PAD characters */
-    unsigned short  ret_lim;        /* retry limit threshold */
-    unsigned short  ret_cnt;        /* retry limit counter */
-    unsigned short  mflr;           /* maximum frame length reg */
-    unsigned short  minflr;         /* minimum frame length reg */
-    unsigned short  maxd1;          /* maximum DMA1 length reg */
-    unsigned short  maxd2;          /* maximum DMA2 length reg */
-    unsigned short  maxd;           /* rx max DMA */
-    unsigned short  dma_cnt;        /* rx dma counter */
-    unsigned short  max_b;          /* max bd byte count */
-    unsigned short  gaddr1;         /* group address filter 1 */
-    unsigned short  gaddr2;         /* group address filter 2 */
-    unsigned short  gaddr3;         /* group address filter 3 */
-    unsigned short  gaddr4;         /* group address filter 4 */
-    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
-    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
-    unsigned long   tbuf0_rba0;
-    unsigned long   tbuf0_crc;
-    unsigned short  tbuf0_bcnt;
-    union {
-        unsigned char b[6];
-        struct {
-            unsigned short high;
-            unsigned short middl;
-            unsigned short low;
-        } w;
-    } paddr;
-    unsigned short  p_per;          /* persistence */
-    unsigned short  rfbd_ptr;       /* rx first bd pointer */
-    unsigned short  tfbd_ptr;       /* tx first bd pointer */
-    unsigned short  tlbd_ptr;       /* tx last bd pointer */
-    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
-    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
-    unsigned long   tbuf1_rba0;
-    unsigned long   tbuf1_crc;
-    unsigned short  tbuf1_bcnt;
-    unsigned short  tx_len;         /* tx frame length counter */
-    unsigned short  iaddr1;         /* individual address filter 1*/
-    unsigned short  iaddr2;         /* individual address filter 2*/
-    unsigned short  iaddr3;         /* individual address filter 3*/
-    unsigned short  iaddr4;         /* individual address filter 4*/
-    unsigned short  boff_cnt;       /* back-off counter */
-    unsigned short  taddr_h;        /* temp address (MSB) */
-    unsigned short  taddr_m;        /* temp address */
-    unsigned short  taddr_l;        /* temp address (LSB) */
-};
-
-struct transparent_pram {
-    /*
-     * SCC parameter RAM
-     */
-    unsigned short  rbase;          /* RX BD base address */
-    unsigned short  tbase;          /* TX BD base address */
-    unsigned char   rfcr;           /* Rx function code */
-    unsigned char   tfcr;           /* Tx function code */
-    unsigned short  mrblr;          /* Rx buffer length */
-    unsigned long   rstate;         /* Rx internal state */
-    unsigned long   rptr;           /* Rx internal data pointer */
-    unsigned short  rbptr;          /* rb BD Pointer */
-    unsigned short  rcount;         /* Rx internal byte count */
-    unsigned long   rtemp;          /* Rx temp */
-    unsigned long   tstate;         /* Tx internal state */
-    unsigned long   tptr;           /* Tx internal data pointer */
-    unsigned short  tbptr;          /* Tx BD pointer */
-    unsigned short  tcount;         /* Tx byte count */
-    unsigned long   ttemp;          /* Tx temp */
-    unsigned long   rcrc;           /* temp receive CRC */
-    unsigned long   tcrc;           /* temp transmit CRC */
-   
-    /*
-     * TRANSPARENT specific parameter RAM
-     */
-    unsigned long   crc_p;          /* CRC Preset */
-    unsigned long   crc_c;          /* CRC constant */
-};
-
-struct timer_pram {
-    /*
-     * RISC timers parameter RAM
-     */
-    unsigned short  tm_base;        /* RISC timer table base adr */
-    unsigned short  tm_ptr;         /* RISC timer table pointer */
-    unsigned short  r_tmr;          /* RISC timer mode register */
-    unsigned short  r_tmv;          /* RISC timer valid register */
-    unsigned long   tm_cmd;         /* RISC timer cmd register */
-    unsigned long   tm_cnt;         /* RISC timer internal cnt */
-};
-
-#endif
diff --git a/arch/m68k/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h
deleted file mode 100644
index 59414cc108d3..000000000000
--- a/arch/m68k/include/asm/m68360_quicc.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/***********************************
- * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of QUICC memory structures
- ***************************************
- */
-
-#ifndef __M68360_QUICC_H
-#define __M68360_QUICC_H
-
-/*
- * include registers and
- * parameter ram definitions files
- */
-#include <asm/m68360_regs.h>
-#include <asm/m68360_pram.h>
-
-
-
-/* Buffer Descriptors */
-typedef struct quicc_bd {
-    volatile unsigned short     status;
-    volatile unsigned short     length;
-    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
-} QUICC_BD;
-
-
-#ifdef MOTOROLA_ORIGINAL
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
-    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
-    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extension ram */
-    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
-};
-#else
-struct user_data {
-    /* BASE + 0x000: user data memory */
-    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
-    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
-    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
-    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
-    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
-};
-#endif
-
-
-/*
- * internal ram
- */
-typedef struct quicc {
-	union {
-		struct quicc32_pram ch_pram_tbl[32];	/* 32*64(bytes) per channel */	
-		struct user_data		u;
-	}ch_or_u;	/* multipul or user space */
-
-    /* BASE + 0xc00: PARAMETER RAM */
-	union {
-		struct scc_pram {
-			union {
-				struct hdlc_pram        h;
-				struct uart_pram        u;
-				struct bisync_pram      b;
-				struct transparent_pram t;
-				unsigned char   RESERVED66[0x70];
-			} pscc;               /* scc parameter area (protocol dependent) */
-			union {
-				struct {
-					unsigned char       RESERVED70[0x10];
-					struct spi_pram     spi;
-					unsigned char       RESERVED72[0x8];
-					struct timer_pram   timer;
-				} timer_spi;
-				struct {
-					struct idma_pram idma;
-					unsigned char       RESERVED67[0x4];
-					union {
-						struct smc_uart_pram u;
-						struct smc_trnsp_pram t;
-					} psmc;
-				} idma_smc;
-			} pothers;
-		} scc;
-		struct ethernet_pram    enet_scc;
-		struct global_multi_pram        m;
-		unsigned char   pr[0x100];
-	} pram[4];
-
-    /* reserved */
-
-    /* BASE + 0x1000: INTERNAL REGISTERS */
-    /* SIM */
-    volatile unsigned long      sim_mcr;        /* module configuration reg */
-    volatile unsigned short     sim_simtr;      /* module test register     */
-    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_avr;        /* auto vector reg          */
-    volatile unsigned char      sim_rsr;        /* reset status reg         */
-    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
-    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
-    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
-    volatile unsigned short     sim_pllcr;      /* PLL control register     */
-    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
-    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
-    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
-    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
-    volatile unsigned char      sim_sypcr;      /* system protection control*/
-    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
-    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
-    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
-    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
-    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
-    volatile unsigned char      sim_swsr;       /* software service         */
-    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
-    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
-    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
-    /* MEMC */
-    volatile unsigned long      memc_gmr;       /* Global memory register   */
-    volatile unsigned short     memc_mstat;     /* MEMC status register     */
-    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
-    volatile unsigned long      memc_br0;       /* base register 0          */
-    volatile unsigned long      memc_or0;       /* option register 0        */
-    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br1;       /* base register 1          */
-    volatile unsigned long      memc_or1;       /* option register 1        */
-    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br2;       /* base register 2          */
-    volatile unsigned long      memc_or2;       /* option register 2        */
-    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br3;       /* base register 3          */
-    volatile unsigned long      memc_or3;       /* option register 3        */
-    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br4;       /* base register 3          */
-    volatile unsigned long      memc_or4;       /* option register 3        */
-    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br5;       /* base register 3          */
-    volatile unsigned long      memc_or5;       /* option register 3        */
-    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br6;       /* base register 3          */
-    volatile unsigned long      memc_or6;       /* option register 3        */
-    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
-    volatile unsigned long      memc_br7;       /* base register 3          */
-    volatile unsigned long      memc_or7;       /* option register 3        */
-    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
-    /* TEST */
-    volatile unsigned short     test_tstmra;    /* master shift a           */
-    volatile unsigned short     test_tstmrb;    /* master shift b           */
-    volatile unsigned short     test_tstsc;     /* shift count              */
-    volatile unsigned short     test_tstrc;     /* repetition counter       */
-    volatile unsigned short     test_creg;      /* control                  */
-    volatile unsigned short     test_dreg;      /* destributed register     */
-    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
-    /* IDMA1 */
-    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
-    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
-    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
-    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
-    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma1_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED20;     /* Reserved area            */
-    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED21;     /* Reserved area            */
-    volatile unsigned char      idma1_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
-    /* SDMA */
-    volatile unsigned char      sdma_sdsr;      /* status reg               */
-    volatile unsigned char      RESERVED23;     /* Reserved area            */
-    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
-    volatile unsigned long      sdma_sdar;      /* address reg              */
-    /* IDMA2 */
-    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
-    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
-    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
-    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
-    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
-    volatile unsigned char      idma2_fcr;      /* function code reg        */
-    volatile unsigned char      RESERVED24;     /* Reserved area            */
-    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
-    volatile unsigned char      RESERVED25;     /* Reserved area            */
-    volatile unsigned char      idma2_csr;      /* channel status reg       */
-    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
-    /* Interrupt Controller */
-    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
-    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
-    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
-    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
-    /* Parallel I/O */
-    volatile unsigned short     pio_padir;      /* port A data direction reg */
-    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
-    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
-    volatile unsigned short     pio_padat;      /* port A data register     */
-    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
-    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
-    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
-    volatile unsigned short     pio_pcso;       /* port C special options   */
-    volatile unsigned short     pio_pcdat;      /* port C data register     */
-    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
-    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
-    /* Timer */
-    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
-    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
-    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
-    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
-    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
-    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
-    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
-    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
-    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
-    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
-    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
-    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
-    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
-    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
-    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
-    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
-    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
-    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
-    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
-    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
-    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
-    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
-    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
-    /* CP */
-    volatile unsigned short     cp_cr;          /* command register         */
-    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rccr;        /* main configuration reg   */
-    volatile unsigned char      RESERVED37;     /* Reserved area            */
-    volatile unsigned char      cp_rmds;        /* development support status reg */
-    volatile unsigned long      cp_rmdr;        /* development support control reg */
-    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
-    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
-    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
-    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
-    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
-    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
-    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
-    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
-    /* BRG */
-    union {
-        volatile unsigned long l;
-        struct {
-            volatile unsigned short BRGC_RESERV:14;
-            volatile unsigned short rst:1;
-            volatile unsigned short en:1;
-            volatile unsigned short extc:2;
-            volatile unsigned short atb:1;
-            volatile unsigned short cd:12;
-            volatile unsigned short div16:1;
-        } b;
-    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
-    /* SCC registers */
-    struct scc_regs {
-        union {
-            struct {
-                /* Low word. */
-                volatile unsigned short GSMR_RESERV2:1;
-                volatile unsigned short edge:2;
-                volatile unsigned short tci:1;
-                volatile unsigned short tsnc:2;
-                volatile unsigned short rinv:1;
-                volatile unsigned short tinv:1;
-                volatile unsigned short tpl:3;
-                volatile unsigned short tpp:2;
-                volatile unsigned short tend:1;
-                volatile unsigned short tdcr:2;
-                volatile unsigned short rdcr:2;
-                volatile unsigned short renc:3;
-                volatile unsigned short tenc:3;
-                volatile unsigned short diag:2;
-                volatile unsigned short enr:1;
-                volatile unsigned short ent:1;
-                volatile unsigned short mode:4;
-                /* High word. */
-                volatile unsigned short GSMR_RESERV1:14;
-                volatile unsigned short pri:1;
-                volatile unsigned short gde:1;
-                volatile unsigned short tcrc:2;
-                volatile unsigned short revd:1;
-                volatile unsigned short trx:1;
-                volatile unsigned short ttx:1;
-                volatile unsigned short cdp:1;
-                volatile unsigned short ctsp:1;
-                volatile unsigned short cds:1;
-                volatile unsigned short ctss:1;
-                volatile unsigned short tfl:1;
-                volatile unsigned short rfw:1;
-                volatile unsigned short txsy:1;
-                volatile unsigned short synl:2;
-                volatile unsigned short rtsm:1;
-                volatile unsigned short rsyn:1;
-            } b;
-            struct {
-                volatile unsigned long low;
-                volatile unsigned long high;
-            } w;
-        } scc_gsmr;                         /* SCC general mode reg         */
-        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
-        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
-        volatile unsigned short scc_todr; /* SCC transmit on demand         */
-        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
-        volatile unsigned short scc_scce;       /* SCC event reg            */
-        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
-        volatile unsigned short scc_sccm;       /* SCC mask reg             */
-        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
-        volatile unsigned char  scc_sccs;       /* SCC status reg           */
-        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
-    } scc_regs[4];
-    /* SMC */
-    struct smc_regs {
-        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
-        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
-        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
-        volatile unsigned char  smc_smce;        /* SMC event reg           */
-        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
-        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
-        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
-    } smc_regs[2];
-    /* SPI */
-    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
-    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
-    volatile unsigned char      spi_spie;       /* SPI event reg            */
-    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
-    volatile unsigned char      spi_spim;       /* SPI mask reg             */
-    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
-    volatile unsigned char      spi_spcom;      /* SPI command reg          */
-    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
-    /* PIP */
-    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
-    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
-    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
-    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
-    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
-    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
-    volatile unsigned long      pip_pbdat;      /* port b data reg          */
-    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
-    /* Serial Interface */
-    volatile unsigned long      si_simode;      /* SI mode register         */
-    volatile unsigned char      si_sigmr;       /* SI global mode register  */
-    volatile unsigned char      RESERVED55;     /* Reserved area            */
-    volatile unsigned char      si_sistr;       /* SI status register       */
-    volatile unsigned char      si_sicmr;       /* SI command register      */
-    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
-    volatile unsigned long      si_sicr;        /* SI clock routing         */
-    volatile unsigned long      si_sirp;        /* SI ram pointers          */
-    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
-    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
-} QUICC;
-
-#endif
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  c-basic-offset: 4
- *  tab-width: 4
- * End:
- */
diff --git a/arch/m68k/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h
deleted file mode 100644
index d57217ca4f27..000000000000
--- a/arch/m68k/include/asm/m68360_regs.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/***********************************
- * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
- ***********************************
- *
- ***************************************
- * Definitions of the QUICC registers
- ***************************************
- */
-
-#ifndef __REGISTERS_H
-#define __REGISTERS_H
-
-#define CLEAR_BIT(x, bit)  x =bit 
-
-/*****************************************************************
-        Command Register
-*****************************************************************/
-
-/* bit fields within command register */
-#define SOFTWARE_RESET  0x8000
-#define CMD_OPCODE      0x0f00
-#define CMD_CHANNEL     0x00f0
-#define CMD_FLAG        0x0001
-
-/* general command opcodes */
-#define INIT_RXTX_PARAMS        0x0000
-#define INIT_RX_PARAMS          0x0100
-#define INIT_TX_PARAMS          0x0200
-#define ENTER_HUNT_MODE         0x0300
-#define STOP_TX                 0x0400
-#define GR_STOP_TX              0x0500
-#define RESTART_TX              0x0600
-#define CLOSE_RX_BD             0x0700
-#define SET_ENET_GROUP          0x0800
-#define RESET_ENET_GROUP        0x0900
-
-/* quicc32 CP commands */
-#define STOP_TX_32		0x0e00	/*add chan# bits 2-6 */
-#define ENTER_HUNT_MODE_32	0x1e00
-
-/* quicc32 mask/event SCC register */
-#define GOV	0x01
-#define GUN	0x02
-#define GINT	0x04
-#define IQOV	0x08
-
-
-/* Timer commands */
-#define SET_TIMER               0x0800
-
-/* Multi channel Interrupt structure */
-#define INTR_VALID	0x8000	/* Valid interrupt entry */
-#define INTR_WRAP	0x4000	/* Wrap bit in the interrupt entry table */
-#define INTR_CH_NU	0x07c0	/* Channel Num in interrupt table */
-#define INTR_MASK_BITS	0x383f
-
-/*
- * General SCC mode register (GSMR)
- */
-
-#define MODE_HDLC               0x0
-#define MODE_APPLE_TALK         0x2
-#define MODE_SS7                0x3
-#define MODE_UART               0x4
-#define MODE_PROFIBUS           0x5
-#define MODE_ASYNC_HDLC         0x6
-#define MODE_V14                0x7
-#define MODE_BISYNC             0x8
-#define MODE_DDCMP              0x9
-#define MODE_MULTI_CHANNEL      0xa
-#define MODE_ETHERNET           0xc
-
-#define DIAG_NORMAL             0x0
-#define DIAG_LOCAL_LPB          0x1
-#define DIAG_AUTO_ECHO          0x2
-#define DIAG_LBP_ECHO           0x3
-
-/* For RENC and TENC fields in GSMR */
-#define ENC_NRZ                 0x0
-#define ENC_NRZI                0x1
-#define ENC_FM0                 0x2
-#define ENC_MANCH               0x4
-#define ENC_DIFF_MANC           0x6
-
-/* For TDCR and RDCR fields in GSMR */
-#define CLOCK_RATE_1            0x0
-#define CLOCK_RATE_8            0x1
-#define CLOCK_RATE_16           0x2
-#define CLOCK_RATE_32           0x3
-
-#define TPP_00                  0x0
-#define TPP_10                  0x1
-#define TPP_01                  0x2
-#define TPP_11                  0x3
-
-#define TPL_NO                  0x0
-#define TPL_8                   0x1
-#define TPL_16                  0x2
-#define TPL_32                  0x3
-#define TPL_48                  0x4
-#define TPL_64                  0x5
-#define TPL_128                 0x6
-
-#define TSNC_INFINITE           0x0
-#define TSNC_14_65              0x1
-#define TSNC_4_15               0x2
-#define TSNC_3_1                0x3
-
-#define EDGE_BOTH               0x0
-#define EDGE_POS                0x1
-#define EDGE_NEG                0x2
-#define EDGE_NO                 0x3
-
-#define SYNL_NO                 0x0
-#define SYNL_4                  0x1
-#define SYNL_8                  0x2
-#define SYNL_16                 0x3
-
-#define TCRC_CCITT16            0x0
-#define TCRC_CRC16              0x1
-#define TCRC_CCITT32            0x2
-
-
-/*****************************************************************
-        TODR (Transmit on demand) Register
-*****************************************************************/
-#define TODR_TOD        0x8000  /* Transmit on demand */
-
-
-/*****************************************************************
-        CICR register settings
-*****************************************************************/
-
-/* note that relative irq priorities of the SCCs can be reordered
- * if desired - see p. 7-377 of the MC68360UM */
-#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
-#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
-#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
-#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
-
-#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
-#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
-#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
-#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
-
-
-/*****************************************************************
-       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
-*****************************************************************/
-
-#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
-#define INTR_SCC1       0x40000000      /* SCC port 1 */
-#define INTR_SCC2       0x20000000      /* SCC port 2 */
-#define INTR_SCC3       0x10000000      /* SCC port 3 */
-#define INTR_SCC4       0x08000000      /* SCC port 4 */
-#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
-#define INTR_TIMER1     0x02000000      /* timer 1 */
-#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
-#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
-#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
-#define INTR_DMA1       0x00200000      /* idma 1 */
-#define INTR_DMA2       0x00100000      /* idma 2 */
-#define INTR_TIMER2     0x00040000      /* timer 2 */
-#define INTR_CP_TIMER   0x00020000      /* CP timer */
-#define INTR_PIP_STATUS 0x00010000      /* PIP status */
-#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
-#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
-#define INTR_TIMER3     0x00001000      /* timer 3 */
-#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
-#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
-#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
-#define INTR_TIMER4     0x00000080      /* timer 4 */
-#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
-#define INTR_SCP        0x00000020      /* SCP */
-#define INTR_SMC1       0x00000010      /* SMC 1 */
-#define INTR_SMC2       0x00000008      /* SMC 2 */
-#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
-#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
-#define INTR_ERR        0x00000001      /* error */
-
-
-/*****************************************************************
-        CPM Interrupt vector encodings (MC68360UM p. 7-376)
-*****************************************************************/
-
-#define CPMVEC_NR		32
-#define CPMVEC_PIO_PC0		0x1f
-#define CPMVEC_SCC1		0x1e
-#define CPMVEC_SCC2		0x1d
-#define CPMVEC_SCC3		0x1c
-#define CPMVEC_SCC4		0x1b
-#define CPMVEC_PIO_PC1		0x1a
-#define CPMVEC_TIMER1		0x19
-#define CPMVEC_PIO_PC2		0x18
-#define CPMVEC_PIO_PC3		0x17
-#define CPMVEC_SDMA_CB_ERR	0x16
-#define CPMVEC_IDMA1		0x15
-#define CPMVEC_IDMA2		0x14
-#define CPMVEC_RESERVED3	0x13
-#define CPMVEC_TIMER2		0x12
-#define CPMVEC_RISCTIMER	0x11
-#define CPMVEC_RESERVED2	0x10
-#define CPMVEC_PIO_PC4		0x0f
-#define CPMVEC_PIO_PC5		0x0e
-#define CPMVEC_TIMER3		0x0c
-#define CPMVEC_PIO_PC6		0x0b
-#define CPMVEC_PIO_PC7		0x0a
-#define CPMVEC_PIO_PC8		0x09
-#define CPMVEC_RESERVED1	0x08
-#define CPMVEC_TIMER4		0x07
-#define CPMVEC_PIO_PC9		0x06
-#define CPMVEC_SPI		0x05
-#define CPMVEC_SMC1		0x04
-#define CPMVEC_SMC2		0x03
-#define CPMVEC_PIO_PC10		0x02
-#define CPMVEC_PIO_PC11		0x01
-#define CPMVEC_ERROR		0x00
-
-/* #define CPMVEC_PIO_PC0		((ushort)0x1f) */
-/* #define CPMVEC_SCC1		((ushort)0x1e) */
-/* #define CPMVEC_SCC2		((ushort)0x1d) */
-/* #define CPMVEC_SCC3		((ushort)0x1c) */
-/* #define CPMVEC_SCC4		((ushort)0x1b) */
-/* #define CPMVEC_PIO_PC1		((ushort)0x1a) */
-/* #define CPMVEC_TIMER1		((ushort)0x19) */
-/* #define CPMVEC_PIO_PC2		((ushort)0x18) */
-/* #define CPMVEC_PIO_PC3		((ushort)0x17) */
-/* #define CPMVEC_SDMA_CB_ERR	((ushort)0x16) */
-/* #define CPMVEC_IDMA1		((ushort)0x15) */
-/* #define CPMVEC_IDMA2		((ushort)0x14) */
-/* #define CPMVEC_RESERVED3	((ushort)0x13) */
-/* #define CPMVEC_TIMER2		((ushort)0x12) */
-/* #define CPMVEC_RISCTIMER	((ushort)0x11) */
-/* #define CPMVEC_RESERVED2	((ushort)0x10) */
-/* #define CPMVEC_PIO_PC4		((ushort)0x0f) */
-/* #define CPMVEC_PIO_PC5		((ushort)0x0e) */
-/* #define CPMVEC_TIMER3		((ushort)0x0c) */
-/* #define CPMVEC_PIO_PC6		((ushort)0x0b) */
-/* #define CPMVEC_PIO_PC7		((ushort)0x0a) */
-/* #define CPMVEC_PIO_PC8		((ushort)0x09) */
-/* #define CPMVEC_RESERVED1	((ushort)0x08) */
-/* #define CPMVEC_TIMER4		((ushort)0x07) */
-/* #define CPMVEC_PIO_PC9		((ushort)0x06) */
-/* #define CPMVEC_SPI		((ushort)0x05) */
-/* #define CPMVEC_SMC1		((ushort)0x04) */
-/* #define CPMVEC_SMC2		((ushort)0x03) */
-/* #define CPMVEC_PIO_PC10		((ushort)0x02) */
-/* #define CPMVEC_PIO_PC11		((ushort)0x01) */
-/* #define CPMVEC_ERROR		((ushort)0x00) */
-
-
-/*****************************************************************
- *        PIO control registers
- *****************************************************************/
-
-/* Port A - See 360UM p. 7-358
- * 
- *  Note that most of these pins have alternate functions
- */
-
-
-/* The macros are nice, but there are all sorts of references to 1-indexed
- * facilities on the 68360... */
-/* #define PA_RXD(n)	((ushort)(0x01<<(2*n))) */
-/* #define PA_TXD(n)	((ushort)(0x02<<(2*n))) */
-
-#define PA_RXD1		((ushort)0x0001)
-#define PA_TXD1		((ushort)0x0002)
-#define PA_RXD2		((ushort)0x0004)
-#define PA_TXD2		((ushort)0x0008)
-#define PA_RXD3		((ushort)0x0010)
-#define PA_TXD3		((ushort)0x0020)
-#define PA_RXD4		((ushort)0x0040)
-#define PA_TXD4		((ushort)0x0080)
-
-#define PA_CLK1		((ushort)0x0100)
-#define PA_CLK2		((ushort)0x0200)
-#define PA_CLK3		((ushort)0x0400)
-#define PA_CLK4		((ushort)0x0800)
-#define PA_CLK5		((ushort)0x1000)
-#define PA_CLK6		((ushort)0x2000)
-#define PA_CLK7		((ushort)0x4000)
-#define PA_CLK8		((ushort)0x8000)
-
-
-/* Port B - See 360UM p. 7-362
- */
-
-
-/* Port C - See 360UM p. 7-365
- */
-
-#define PC_RTS1		((ushort)0x0001)
-#define PC_RTS2		((ushort)0x0002)
-#define PC__RTS3	((ushort)0x0004) /* !RTS3 */
-#define PC__RTS4	((ushort)0x0008) /* !RTS4 */
-
-#define PC_CTS1		((ushort)0x0010)
-#define PC_CD1		((ushort)0x0020)
-#define PC_CTS2		((ushort)0x0040)
-#define PC_CD2		((ushort)0x0080)
-#define PC_CTS3		((ushort)0x0100)
-#define PC_CD3		((ushort)0x0200)
-#define PC_CTS4		((ushort)0x0400)
-#define PC_CD4		((ushort)0x0800)
-
-
-
-/*****************************************************************
-        chip select option register
-*****************************************************************/
-#define DTACK           0xe000
-#define ADR_MASK        0x1ffc
-#define RDWR_MASK       0x0002
-#define FC_MASK         0x0001
-
-/*****************************************************************
-        tbase and rbase registers
-*****************************************************************/
-#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
-#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
-#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
-#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
-    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
-#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
-#define INCREASE_TBD(bd,quicc,pram) {  \
-    if((bd)->status & T_W)             \
-        (bd) = TBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_TBD(bd,quicc,pram) {  \
-    if ((bd) == TBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-#define INCREASE_RBD(bd,quicc,pram) {  \
-    if((bd)->status & R_W)             \
-        (bd) = RBD_ADDR(quicc,pram);   \
-    else                               \
-        (bd)++;                        \
-}
-#define DECREASE_RBD(bd,quicc,pram) {  \
-    if ((bd) == RBD_ADDR(quicc, pram)) \
-        while (!((bd)->status & T_W))  \
-            (bd)++;                    \
-    else                               \
-        (bd)--;                        \
-}
-
-/*****************************************************************
-        Macros for Multi channel
-*****************************************************************/
-#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
-#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
-#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
-		(&(quicc->ch_or_u.ch_pram_tbl[channel])))
-#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
-#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
-#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
-#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
-    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
-#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
-     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
-    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
-
-#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & T_W)                        \
-        (bd) = TBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
-    if((bd)->status & R_W)                        \
-        (bd) = RBD_32_ADDR(quicc,page,channel);   \
-    else                                          \
-        (bd)++;                                   \
-}
-#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
-    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
-        while (!((bd)->status & T_W))             \
-            (bd)++;                               \
-    else                                          \
-        (bd)--;                                   \
-}
-
-#endif
diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
index fde874a01e20..42566fd052bc 100644
--- a/arch/m68k/include/asm/mac_iop.h
+++ b/arch/m68k/include/asm/mac_iop.h
@@ -48,7 +48,7 @@
 
 /* IOP message status codes */
 
-#define IOP_MSGSTATUS_UNUSED	0	/* Unusued message structure       */
+#define IOP_MSGSTATUS_UNUSED	0	/* Unused message structure        */
 #define IOP_MSGSTATUS_WAITING	1	/* waiting for channel             */
 #define IOP_MSGSTATUS_SENT	2	/* message sent, awaiting reply    */
 #define IOP_MSGSTATUS_COMPLETE	3	/* message complete and reply rcvd */
diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
index e5c0d71d1543..923305117a69 100644
--- a/arch/m68k/include/asm/mac_psc.h
+++ b/arch/m68k/include/asm/mac_psc.h
@@ -209,7 +209,6 @@
 #ifndef __ASSEMBLY__
 
 extern volatile __u8 *psc;
-extern int psc_present;
 
 extern void psc_register_interrupts(void);
 extern void psc_irq_enable(int);
diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
index 089f0f150bbf..1150e42c3f19 100644
--- a/arch/m68k/include/asm/mcftimer.h
+++ b/arch/m68k/include/asm/mcftimer.h
@@ -51,7 +51,7 @@
  *	Bit definitions for the Timer Event Registers (TER).
  */
 #define	MCFTIMER_TER_CAP	0x01		/* Capture event */
-#define	MCFTIMER_TER_REF	0x02		/* Refernece event */
+#define	MCFTIMER_TER_REF	0x02		/* Reference event */
 
 /****************************************************************************/
 #endif	/* mcftimer_h */
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
index 38b024a0b045..430d4d54c883 100644
--- a/arch/m68k/include/asm/page.h
+++ b/arch/m68k/include/asm/page.h
@@ -48,6 +48,9 @@ extern unsigned long _ramend;
 #include <asm/page_no.h>
 #endif
 
+#define __phys_to_pfn(paddr)	((unsigned long)((paddr) >> PAGE_SHIFT))
+#define __pfn_to_phys(pfn)	PFN_PHYS(pfn)
+
 #define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
 				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h
index 5029f73e6294..e7a1946455a8 100644
--- a/arch/m68k/include/asm/page_mm.h
+++ b/arch/m68k/include/asm/page_mm.h
@@ -6,9 +6,6 @@
 #include <linux/compiler.h>
 #include <asm/module.h>
 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
 /*
  * We don't need to check for alignment etc.
  */
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
index ef209169579a..fa7f32d9836b 100644
--- a/arch/m68k/include/asm/page_no.h
+++ b/arch/m68k/include/asm/page_no.h
@@ -6,9 +6,6 @@
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
-#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)	free_page(addr)
-
 #define clear_page(page)	memset((page), 0, PAGE_SIZE)
 #define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
 
diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h
index 848c3dfaad50..3a3dbcf4051d 100644
--- a/arch/m68k/include/asm/pci.h
+++ b/arch/m68k/include/asm/pci.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_M68K_PCI_H
 #define _ASM_M68K_PCI_H
 
-#include <asm-generic/pci-dma-compat.h>
 #include <asm-generic/pci.h>
 
 /* The PCI address space does equal the physical memory
diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
index 06d0cb19b4e1..6d4497049b4b 100644
--- a/arch/m68k/include/asm/serial.h
+++ b/arch/m68k/include/asm/serial.h
@@ -18,11 +18,11 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS UPF_BOOT_AUTOCONF
 #endif
 
 #ifdef CONFIG_ISA
diff --git a/arch/m68k/include/asm/uaccess_no.h b/arch/m68k/include/asm/uaccess_no.h
index 68bbe9b312f1..1bdf15263754 100644
--- a/arch/m68k/include/asm/uaccess_no.h
+++ b/arch/m68k/include/asm/uaccess_no.h
@@ -135,10 +135,6 @@ extern int __get_user_bad(void);
 #define __copy_to_user_inatomic __copy_to_user
 #define __copy_from_user_inatomic __copy_from_user
 
-#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
-
 /*
  * Copy a null terminated string from userspace.
  */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 0793a7f17417..a857d82ec509 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		375
+#define NR_syscalls		379
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT
diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h
index 5e6fae6c275f..9fe674bf911f 100644
--- a/arch/m68k/include/uapi/asm/unistd.h
+++ b/arch/m68k/include/uapi/asm/unistd.h
@@ -380,5 +380,9 @@
 #define __NR_sendmmsg		372
 #define __NR_userfaultfd	373
 #define __NR_membarrier		374
+#define __NR_mlock2		375
+#define __NR_copy_file_range	376
+#define __NR_preadv2		377
+#define __NR_pwritev2		378
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index 564665f9af30..cbc78b4117b5 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -18,8 +18,8 @@
 
 #if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *handle, gfp_t flag)
+static void *m68k_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
+		gfp_t flag, struct dma_attrs *attrs)
 {
 	struct page *page, **map;
 	pgprot_t pgprot;
@@ -61,8 +61,8 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 	return addr;
 }
 
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *addr, dma_addr_t handle)
+static void m68k_dma_free(struct device *dev, size_t size, void *addr,
+		dma_addr_t handle, struct dma_attrs *attrs)
 {
 	pr_debug("dma_free_coherent: %p, %x\n", addr, handle);
 	vfree(addr);
@@ -72,8 +72,8 @@ void dma_free_coherent(struct device *dev, size_t size,
 
 #include <asm/cacheflush.h>
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t gfp)
+static void *m68k_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
 {
 	void *ret;
 	/* ignore region specifiers */
@@ -90,19 +90,16 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 	return ret;
 }
 
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle)
+static void m68k_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
 #endif /* CONFIG_MMU && !CONFIG_COLDFIRE */
 
-EXPORT_SYMBOL(dma_alloc_coherent);
-EXPORT_SYMBOL(dma_free_coherent);
-
-void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
-				size_t size, enum dma_data_direction dir)
+static void m68k_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
@@ -118,10 +115,9 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
 		break;
 	}
 }
-EXPORT_SYMBOL(dma_sync_single_for_device);
 
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
-			    int nents, enum dma_data_direction dir)
+static void m68k_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sglist, int nents, enum dma_data_direction dir)
 {
 	int i;
 	struct scatterlist *sg;
@@ -131,31 +127,19 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
 					   dir);
 	}
 }
-EXPORT_SYMBOL(dma_sync_sg_for_device);
-
-dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
-			  enum dma_data_direction dir)
-{
-	dma_addr_t handle = virt_to_bus(addr);
-
-	dma_sync_single_for_device(dev, handle, size, dir);
-	return handle;
-}
-EXPORT_SYMBOL(dma_map_single);
 
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			unsigned long offset, size_t size,
-			enum dma_data_direction dir)
+static dma_addr_t m68k_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		struct dma_attrs *attrs)
 {
 	dma_addr_t handle = page_to_phys(page) + offset;
 
 	dma_sync_single_for_device(dev, handle, size, dir);
 	return handle;
 }
-EXPORT_SYMBOL(dma_map_page);
 
-int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
-	       enum dma_data_direction dir)
+static int m68k_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	int i;
 	struct scatterlist *sg;
@@ -167,4 +151,13 @@ int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
 	}
 	return nents;
 }
-EXPORT_SYMBOL(dma_map_sg);
+
+struct dma_map_ops m68k_dma_ops = {
+	.alloc			= m68k_dma_alloc,
+	.free			= m68k_dma_free,
+	.map_page		= m68k_dma_map_page,
+	.map_sg			= m68k_dma_map_sg,
+	.sync_single_for_device	= m68k_dma_sync_single_for_device,
+	.sync_sg_for_device	= m68k_dma_sync_sg_for_device,
+};
+EXPORT_SYMBOL(m68k_dma_ops);
diff --git a/arch/m68k/kernel/early_printk.c b/arch/m68k/kernel/early_printk.c
index ff9708d71921..7d3fe08a48eb 100644
--- a/arch/m68k/kernel/early_printk.c
+++ b/arch/m68k/kernel/early_printk.c
@@ -20,8 +20,8 @@ asmlinkage void __init debug_cons_nputs(const char *s, unsigned n);
 static void __ref debug_cons_write(struct console *c,
 				   const char *s, unsigned n)
 {
-#if !(defined(CONFIG_SUN3)   || defined(CONFIG_M68360) || \
-      defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \
+      defined(CONFIG_COLDFIRE))
 	if (MACH_IS_MVME16x)
 		mvme16x_cons_write(c, s, n);
 	else
@@ -52,8 +52,8 @@ early_param("earlyprintk", setup_early_printk);
  * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called
  * after init sections are discarded (for platforms that use it).
  */
-#if !(defined(CONFIG_SUN3)   || defined(CONFIG_M68360) || \
-      defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE))
+#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68000) || \
+      defined(CONFIG_COLDFIRE))
 
 static int __init unregister_early_console(void)
 {
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index b54ac7aba850..97cd3ea5f10b 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -71,13 +71,19 @@ ENTRY(__sys_vfork)
 
 ENTRY(sys_sigreturn)
 	SAVE_SWITCH_STACK
+	movel	%sp,%sp@-		  | switch_stack pointer
+	pea	%sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer
 	jbsr	do_sigreturn
+	addql	#8,%sp
 	RESTORE_SWITCH_STACK
 	rts
 
 ENTRY(sys_rt_sigreturn)
 	SAVE_SWITCH_STACK
+	movel	%sp,%sp@-		  | switch_stack pointer
+	pea	%sp@(SWITCH_STACK_SIZE+4) | pt_regs pointer
 	jbsr	do_rt_sigreturn
+	addql	#8,%sp
 	RESTORE_SWITCH_STACK
 	rts
 
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 88c27d94a721..9309789215a8 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -68,9 +68,6 @@ void (*mach_power_off)(void);
 #define CPU_NAME	"MC68000"
 #endif
 #endif /* CONFIG_M68000 */
-#ifdef CONFIG_M68360
-#define CPU_NAME	"MC68360"
-#endif
 #ifndef CPU_NAME
 #define	CPU_NAME	"UNKNOWN"
 #endif
@@ -209,10 +206,6 @@ void __init setup_arch(char **cmdline_p)
 #if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 )
 	printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n");
 #endif
-#if defined (CONFIG_M68360)
-	printk(KERN_INFO "QUICC port done by SED Systems <hamilton@sedsystems.ca>,\n");
-	printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. <mleslie@lineo.com>.\n");
-#endif
 #ifdef CONFIG_DRAGEN2
 	printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
 #endif
@@ -238,11 +231,14 @@ void __init setup_arch(char **cmdline_p)
 	 * Give all the memory to the bootmap allocator, tell it to put the
 	 * boot mem_map at the start of memory.
 	 */
+	min_low_pfn = PFN_DOWN(memory_start);
+	max_pfn = max_low_pfn = PFN_DOWN(memory_end);
+
 	bootmap_size = init_bootmem_node(
 			NODE_DATA(0),
-			memory_start >> PAGE_SHIFT, /* map goes here */
-			PAGE_OFFSET >> PAGE_SHIFT,	/* 0 on coldfire */
-			memory_end >> PAGE_SHIFT);
+			min_low_pfn,		/* map goes here */
+			PFN_DOWN(PAGE_OFFSET),
+			max_pfn);
 	/*
 	 * Free the usable memory, we have to make sure we do not free
 	 * the bootmem bitmap so we then reserve it after freeing it :-)
diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
index af1c4f330aef..2dcee3a88867 100644
--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@@ -737,10 +737,8 @@ badframe:
 	return 1;
 }
 
-asmlinkage int do_sigreturn(unsigned long __unused)
+asmlinkage int do_sigreturn(struct pt_regs *regs, struct switch_stack *sw)
 {
-	struct switch_stack *sw = (struct switch_stack *) &__unused;
-	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
 	unsigned long usp = rdusp();
 	struct sigframe __user *frame = (struct sigframe __user *)(usp - 4);
 	sigset_t set;
@@ -764,10 +762,8 @@ badframe:
 	return 0;
 }
 
-asmlinkage int do_rt_sigreturn(unsigned long __unused)
+asmlinkage int do_rt_sigreturn(struct pt_regs *regs, struct switch_stack *sw)
 {
-	struct switch_stack *sw = (struct switch_stack *) &__unused;
-	struct pt_regs *regs = (struct pt_regs *) (sw + 1);
 	unsigned long usp = rdusp();
 	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(usp - 4);
 	sigset_t set;
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 5dd0e80042f5..d6fd6d9ced24 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -395,3 +395,7 @@ ENTRY(sys_call_table)
 	.long sys_sendmmsg
 	.long sys_userfaultfd
 	.long sys_membarrier
+	.long sys_mlock2		/* 375 */
+	.long sys_copy_file_range
+	.long sys_preadv2
+	.long sys_pwritev2
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index 5c1a6b2ff0af..9f98c0871901 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -174,7 +174,7 @@ void __init mac_init_IRQ(void)
 		oss_register_interrupts();
 	else
 		via_register_interrupts();
-	if (psc_present)
+	if (psc)
 		psc_register_interrupts();
 	if (baboon_present)
 		baboon_register_interrupts();
@@ -212,7 +212,7 @@ void mac_irq_enable(struct irq_data *data)
 	case 4:
 	case 5:
 	case 6:
-		if (psc_present)
+		if (psc)
 			psc_irq_enable(irq);
 		else if (oss_present)
 			oss_irq_enable(irq);
@@ -242,7 +242,7 @@ void mac_irq_disable(struct irq_data *data)
 	case 4:
 	case 5:
 	case 6:
-		if (psc_present)
+		if (psc)
 			psc_irq_disable(irq);
 		else if (oss_present)
 			oss_irq_disable(irq);
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index 2290c0cae48b..cb2b1a3a2b62 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -27,7 +27,6 @@
 
 #define DEBUG_PSC
 
-int psc_present;
 volatile __u8 *psc;
 EXPORT_SYMBOL_GPL(psc);
 
@@ -39,7 +38,9 @@ static void psc_debug_dump(void)
 {
 	int	i;
 
-	if (!psc_present) return;
+	if (!psc)
+		return;
+
 	for (i = 0x30 ; i < 0x70 ; i += 0x10) {
 		printk("PSC #%d:  IFR = 0x%02X IER = 0x%02X\n",
 			i >> 4,
@@ -81,7 +82,6 @@ void __init psc_init(void)
 	 && macintosh_config->ident != MAC_MODEL_Q840)
 	{
 		psc = NULL;
-		psc_present = 0;
 		return;
 	}
 
@@ -91,7 +91,6 @@ void __init psc_init(void)
 	 */
 
 	psc = (void *) PSC_BASE;
-	psc_present = 1;
 
 	printk("PSC detected at %p\n", psc);
 
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index ce56e04386e7..920ff63d4a81 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -68,7 +68,7 @@ static int gIER,gIFR,gBufA,gBufB;
  * interrupt. This limitation also seems to apply to VIA clone logic cores in
  * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.)
  *
- * We used to fake it by configuring the relevent VIA pin as an output
+ * We used to fake it by configuring the relevant VIA pin as an output
  * (to mask the interrupt) or input (to unmask). That scheme did not work on
  * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector
  * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE,
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index b958916e5eac..8f37fdd80be9 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -250,7 +250,7 @@ void __init paging_init(void)
 	high_memory = phys_to_virt(max_addr);
 
 	min_low_pfn = availmem >> PAGE_SHIFT;
-	max_low_pfn = max_addr >> PAGE_SHIFT;
+	max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
 
 	for (i = 0; i < m68k_num_memory; i++) {
 		addr = m68k_memory[i].addr;
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index a8b942bf7163..71884bf01d72 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -118,13 +118,13 @@ static void __init sun3_bootmem_alloc(unsigned long memory_start,
 	memory_end = memory_end & PAGE_MASK;
 
 	start_page = __pa(memory_start) >> PAGE_SHIFT;
-	num_pages = __pa(memory_end) >> PAGE_SHIFT;
+	max_pfn = num_pages = __pa(memory_end) >> PAGE_SHIFT;
 
 	high_memory = (void *)memory_end;
 	availmem = memory_start;
 
 	m68k_setup_node(0);
-	availmem += init_bootmem_node(NODE_DATA(0), start_page, 0, num_pages);
+	availmem += init_bootmem(start_page, num_pages);
 	availmem = (availmem + (PAGE_SIZE-1)) & PAGE_MASK;
 
 	free_bootmem(__pa(availmem), memory_end - (availmem));
@@ -171,7 +171,7 @@ static void __init sun3_sched_init(irq_handler_t timer_routine)
         intersil_clear();
 }
 
-#ifdef CONFIG_SUN3_SCSI
+#if IS_ENABLED(CONFIG_SUN3_SCSI)
 
 static const struct resource sun3_scsi_vme_rsrc[] __initconst = {
 	{
diff --git a/arch/metag/Kconfig b/arch/metag/Kconfig
index 0b389a81c43a..a0fa88da3e31 100644
--- a/arch/metag/Kconfig
+++ b/arch/metag/Kconfig
@@ -36,9 +36,6 @@ config STACKTRACE_SUPPORT
 config LOCKDEP_SUPPORT
 	def_bool y
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
diff --git a/arch/metag/include/asm/barrier.h b/arch/metag/include/asm/barrier.h
index 172b7e5efc53..5418517aa5eb 100644
--- a/arch/metag/include/asm/barrier.h
+++ b/arch/metag/include/asm/barrier.h
@@ -44,16 +44,6 @@ static inline void wr_fence(void)
 #define rmb()		barrier()
 #define wmb()		mb()
 
-#define dma_rmb()	rmb()
-#define dma_wmb()	wmb()
-
-#ifndef CONFIG_SMP
-#define fence()		do { } while (0)
-#define smp_mb()        barrier()
-#define smp_rmb()       barrier()
-#define smp_wmb()       barrier()
-#else
-
 #ifdef CONFIG_METAG_SMP_WRITE_REORDERING
 /*
  * Write to the atomic memory unlock system event register (command 0). This is
@@ -63,45 +53,32 @@ static inline void wr_fence(void)
  * incoherence). It is therefore ineffective if used after and on the same
  * thread as a write.
  */
-static inline void fence(void)
+static inline void metag_fence(void)
 {
 	volatile int *flushptr = (volatile int *) LINSYSEVENT_WR_ATOMIC_UNLOCK;
 	barrier();
 	*flushptr = 0;
 	barrier();
 }
-#define smp_mb()        fence()
-#define smp_rmb()       fence()
-#define smp_wmb()       barrier()
+#define __smp_mb()	metag_fence()
+#define __smp_rmb()	metag_fence()
+#define __smp_wmb()	barrier()
 #else
-#define fence()		do { } while (0)
-#define smp_mb()        barrier()
-#define smp_rmb()       barrier()
-#define smp_wmb()       barrier()
-#endif
+#define metag_fence()	do { } while (0)
+#define __smp_mb()	barrier()
+#define __smp_rmb()	barrier()
+#define __smp_wmb()	barrier()
 #endif
 
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
-
-#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0)
-
-#define smp_store_release(p, v)						\
-do {									\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	WRITE_ONCE(*p, v);						\
-} while (0)
+#ifdef CONFIG_SMP
+#define fence()		metag_fence()
+#else
+#define fence()		do { } while (0)
+#endif
 
-#define smp_load_acquire(p)						\
-({									\
-	typeof(*p) ___p1 = READ_ONCE(*p);				\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	___p1;								\
-})
+#define __smp_mb__before_atomic()	barrier()
+#define __smp_mb__after_atomic()	barrier()
 
-#define smp_mb__before_atomic()	barrier()
-#define smp_mb__after_atomic()	barrier()
+#include <asm-generic/barrier.h>
 
 #endif /* _ASM_METAG_BARRIER_H */
diff --git a/arch/metag/include/asm/checksum.h b/arch/metag/include/asm/checksum.h
index 08dd1cc65799..f65fe83b1730 100644
--- a/arch/metag/include/asm/checksum.h
+++ b/arch/metag/include/asm/checksum.h
@@ -59,8 +59,7 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
  * returns a 16-bit checksum, already complemented
  */
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	unsigned long len_proto = (proto + len) << 8;
@@ -78,8 +77,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 }
 
 static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		  unsigned short proto, __wsum sum)
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len,
+		  __u8 proto, __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }
diff --git a/arch/metag/include/asm/dma-mapping.h b/arch/metag/include/asm/dma-mapping.h
index eb5cdec94be0..27af5d479ce6 100644
--- a/arch/metag/include/asm/dma-mapping.h
+++ b/arch/metag/include/asm/dma-mapping.h
@@ -1,177 +1,11 @@
 #ifndef _ASM_METAG_DMA_MAPPING_H
 #define _ASM_METAG_DMA_MAPPING_H
 
-#include <linux/mm.h>
+extern struct dma_map_ops metag_dma_ops;
 
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <linux/scatterlist.h>
-#include <asm/bug.h>
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *vaddr, dma_addr_t dma_handle);
-
-void dma_sync_for_device(void *vaddr, size_t size, int dma_direction);
-void dma_sync_for_cpu(void *vaddr, size_t size, int dma_direction);
-
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t dma_addr, size_t size);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t dma_addr, size_t size);
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
-	WARN_ON(size == 0);
-	dma_sync_for_device(ptr, size, direction);
-	return virt_to_phys(ptr);
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		 enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
-	dma_sync_for_cpu(phys_to_virt(dma_addr), size, direction);
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
-	   enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(!valid_dma_direction(direction));
-	WARN_ON(nents == 0 || sglist[0].length == 0);
-
-	for_each_sg(sglist, sg, nents, i) {
-		BUG_ON(!sg_page(sg));
-
-		sg->dma_address = sg_phys(sg);
-		dma_sync_for_device(sg_virt(sg), sg->length, direction);
-	}
-
-	return nents;
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page, unsigned long offset,
-	     size_t size, enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
-	dma_sync_for_device((void *)(page_to_phys(page) + offset), size,
-			    direction);
-	return page_to_phys(page) + offset;
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	       enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
-	dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
-}
-
-
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sglist, int nhwentries,
-	     enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(!valid_dma_direction(direction));
-	WARN_ON(nhwentries == 0 || sglist[0].length == 0);
-
-	for_each_sg(sglist, sg, nhwentries, i) {
-		BUG_ON(!sg_page(sg));
-
-		sg->dma_address = sg_phys(sg);
-		dma_sync_for_cpu(sg_virt(sg), sg->length, direction);
-	}
-}
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-			enum dma_data_direction direction)
-{
-	dma_sync_for_cpu(phys_to_virt(dma_handle), size, direction);
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-			   size_t size, enum dma_data_direction direction)
-{
-	dma_sync_for_device(phys_to_virt(dma_handle), size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			      unsigned long offset, size_t size,
-			      enum dma_data_direction direction)
-{
-	dma_sync_for_cpu(phys_to_virt(dma_handle)+offset, size,
-			 direction);
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
-{
-	dma_sync_for_device(phys_to_virt(dma_handle)+offset, size,
-			    direction);
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, int nelems,
-		    enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nelems, i)
-		dma_sync_for_cpu(sg_virt(sg), sg->length, direction);
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
-		       int nelems, enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nelems, i)
-		dma_sync_for_device(sg_virt(sg), sg->length, direction);
-}
-
-static inline int
-dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	return 0;
-}
-
-#define dma_supported(dev, mask)        (1)
-
-static inline int
-dma_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
+	return &metag_dma_ops;
 }
 
 /*
@@ -184,11 +18,4 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 }
 
-/* drivers/base/dma-mapping.c */
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
 #endif
diff --git a/arch/metag/include/asm/gpio.h b/arch/metag/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/metag/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/metag/include/asm/highmem.h b/arch/metag/include/asm/highmem.h
index 6646a15c73dd..9b1d172cd884 100644
--- a/arch/metag/include/asm/highmem.h
+++ b/arch/metag/include/asm/highmem.h
@@ -56,7 +56,6 @@ extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(void *ptr);
 #endif
 
 #endif
diff --git a/arch/metag/include/asm/irq.h b/arch/metag/include/asm/irq.h
index ad6bd0edbc3b..6ac6d4a051dd 100644
--- a/arch/metag/include/asm/irq.h
+++ b/arch/metag/include/asm/irq.h
@@ -6,8 +6,12 @@ extern void irq_ctx_init(int cpu);
 extern void irq_ctx_exit(int cpu);
 # define __ARCH_HAS_DO_SOFTIRQ
 #else
-# define irq_ctx_init(cpu) do { } while (0)
-# define irq_ctx_exit(cpu) do { } while (0)
+static inline void irq_ctx_init(int cpu)
+{
+}
+static inline void irq_ctx_exit(int cpu)
+{
+}
 #endif
 
 void tbi_startup_interrupt(int);
diff --git a/arch/metag/kernel/dma.c b/arch/metag/kernel/dma.c
index c700d625067a..e12368d02155 100644
--- a/arch/metag/kernel/dma.c
+++ b/arch/metag/kernel/dma.c
@@ -171,8 +171,8 @@ out:
  * Allocate DMA-coherent memory space and return both the kernel remapped
  * virtual and bus address for that space.
  */
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *handle, gfp_t gfp)
+static void *metag_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
 	struct page *page;
 	struct metag_vm_region *c;
@@ -263,13 +263,12 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 no_page:
 	return NULL;
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
 /*
  * free a page as defined by the above mapping.
  */
-void dma_free_coherent(struct device *dev, size_t size,
-		       void *vaddr, dma_addr_t dma_handle)
+static void metag_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	struct metag_vm_region *c;
 	unsigned long flags, addr;
@@ -329,16 +328,19 @@ no_area:
 	       __func__, vaddr);
 	dump_stack();
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
-
-static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
-		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
+static int metag_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+		void *cpu_addr, dma_addr_t dma_addr, size_t size,
+		struct dma_attrs *attrs)
 {
-	int ret = -ENXIO;
-
 	unsigned long flags, user_size, kern_size;
 	struct metag_vm_region *c;
+	int ret = -ENXIO;
+
+	if (dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs))
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
 	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
@@ -364,25 +366,6 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 	return ret;
 }
 
-int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
-		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_coherent);
-
-int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
-			  void *cpu_addr, dma_addr_t dma_addr, size_t size)
-{
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
-}
-EXPORT_SYMBOL(dma_mmap_writecombine);
-
-
-
-
 /*
  * Initialise the consistent memory allocation.
  */
@@ -423,7 +406,7 @@ early_initcall(dma_alloc_init);
 /*
  * make an area consistent to devices.
  */
-void dma_sync_for_device(void *vaddr, size_t size, int dma_direction)
+static void dma_sync_for_device(void *vaddr, size_t size, int dma_direction)
 {
 	/*
 	 * Ensure any writes get through the write combiner. This is necessary
@@ -465,12 +448,11 @@ void dma_sync_for_device(void *vaddr, size_t size, int dma_direction)
 
 	wmb();
 }
-EXPORT_SYMBOL(dma_sync_for_device);
 
 /*
  * make an area consistent to the core.
  */
-void dma_sync_for_cpu(void *vaddr, size_t size, int dma_direction)
+static void dma_sync_for_cpu(void *vaddr, size_t size, int dma_direction)
 {
 	/*
 	 * Hardware L2 cache prefetch doesn't occur across 4K physical
@@ -497,4 +479,100 @@ void dma_sync_for_cpu(void *vaddr, size_t size, int dma_direction)
 
 	rmb();
 }
-EXPORT_SYMBOL(dma_sync_for_cpu);
+
+static dma_addr_t metag_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction direction, struct dma_attrs *attrs)
+{
+	dma_sync_for_device((void *)(page_to_phys(page) + offset), size,
+			    direction);
+	return page_to_phys(page) + offset;
+}
+
+static void metag_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+		size_t size, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
+}
+
+static int metag_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sglist, sg, nents, i) {
+		BUG_ON(!sg_page(sg));
+
+		sg->dma_address = sg_phys(sg);
+		dma_sync_for_device(sg_virt(sg), sg->length, direction);
+	}
+
+	return nents;
+}
+
+
+static void metag_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+		int nhwentries, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sglist, sg, nhwentries, i) {
+		BUG_ON(!sg_page(sg));
+
+		sg->dma_address = sg_phys(sg);
+		dma_sync_for_cpu(sg_virt(sg), sg->length, direction);
+	}
+}
+
+static void metag_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	dma_sync_for_cpu(phys_to_virt(dma_handle), size, direction);
+}
+
+static void metag_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	dma_sync_for_device(phys_to_virt(dma_handle), size, direction);
+}
+
+static void metag_dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nelems, i)
+		dma_sync_for_cpu(sg_virt(sg), sg->length, direction);
+}
+
+static void metag_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nelems, i)
+		dma_sync_for_device(sg_virt(sg), sg->length, direction);
+}
+
+struct dma_map_ops metag_dma_ops = {
+	.alloc			= metag_dma_alloc,
+	.free			= metag_dma_free,
+	.map_page		= metag_dma_map_page,
+	.map_sg			= metag_dma_map_sg,
+	.sync_single_for_device	= metag_dma_sync_single_for_device,
+	.sync_single_for_cpu	= metag_dma_sync_single_for_cpu,
+	.sync_sg_for_cpu	= metag_dma_sync_sg_for_cpu,
+	.mmap			= metag_dma_mmap,
+};
+EXPORT_SYMBOL(metag_dma_ops);
diff --git a/arch/metag/kernel/ftrace.c b/arch/metag/kernel/ftrace.c
index ed1d685157c2..ac8c039b0318 100644
--- a/arch/metag/kernel/ftrace.c
+++ b/arch/metag/kernel/ftrace.c
@@ -54,12 +54,11 @@ static int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	/* read the text we want to modify */
diff --git a/arch/metag/kernel/module.c b/arch/metag/kernel/module.c
index 986331cd0a52..bb8dfba9a763 100644
--- a/arch/metag/kernel/module.c
+++ b/arch/metag/kernel/module.c
@@ -176,8 +176,8 @@ static uint32_t do_plt_call(void *location, Elf32_Addr val,
 	tramp[1] = 0xac000001 | ((val & 0x0000ffff) << 3);
 
 	/* Init, or core PLT? */
-	if (location >= mod->module_core
-	    && location < mod->module_core + mod->core_size)
+	if (location >= mod->core_layout.base
+	    && location < mod->core_layout.base + mod->core_layout.size)
 		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
 	else
 		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
diff --git a/arch/metag/kernel/smp.c b/arch/metag/kernel/smp.c
index ac3a199e33e7..bad13232de51 100644
--- a/arch/metag/kernel/smp.c
+++ b/arch/metag/kernel/smp.c
@@ -312,6 +312,7 @@ void cpu_die(void)
 {
 	local_irq_disable();
 	idle_task_exit();
+	irq_ctx_exit(smp_processor_id());
 
 	(void)cpu_report_death();
 
@@ -366,6 +367,7 @@ asmlinkage void secondary_start_kernel(void)
 		panic("No TBI found!");
 
 	per_cpu_trap_init(cpu);
+	irq_ctx_init(cpu);
 
 	preempt_disable();
 
@@ -394,7 +396,7 @@ asmlinkage void secondary_start_kernel(void)
 	/*
 	 * OK, it's off to the idle thread for us
 	 */
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
diff --git a/arch/metag/kernel/vmlinux.lds.S b/arch/metag/kernel/vmlinux.lds.S
index e12055e88bfe..150ace92c7ad 100644
--- a/arch/metag/kernel/vmlinux.lds.S
+++ b/arch/metag/kernel/vmlinux.lds.S
@@ -24,6 +24,7 @@ SECTIONS
 	LOCK_TEXT
 	KPROBES_TEXT
 	IRQENTRY_TEXT
+	SOFTIRQENTRY_TEXT
 	*(.text.*)
 	*(.gnu.warning)
 	}
diff --git a/arch/metag/mm/highmem.c b/arch/metag/mm/highmem.c
index 807f1b1c4e65..f19a87f2c1ec 100644
--- a/arch/metag/mm/highmem.c
+++ b/arch/metag/mm/highmem.c
@@ -111,20 +111,6 @@ void *kmap_atomic_pfn(unsigned long pfn)
 	return (void *)vaddr;
 }
 
-struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long vaddr = (unsigned long)ptr;
-	int idx;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-
 void __init kmap_init(void)
 {
 	unsigned long kmap_vstart;
diff --git a/arch/metag/mm/hugetlbpage.c b/arch/metag/mm/hugetlbpage.c
index 53f0f6c47027..b38700ae4e84 100644
--- a/arch/metag/mm/hugetlbpage.c
+++ b/arch/metag/mm/hugetlbpage.c
@@ -67,7 +67,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 	pgd = pgd_offset(mm, addr);
 	pud = pud_offset(pgd, addr);
 	pmd = pmd_offset(pud, addr);
-	pte = pte_alloc_map(mm, NULL, pmd, addr);
+	pte = pte_alloc_map(mm, pmd, addr);
 	pgd->pgd &= ~_PAGE_SZ_MASK;
 	pgd->pgd |= _PAGE_SZHUGE;
 
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 0bce820428fc..3d793b55f60c 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -19,7 +19,6 @@ config MICROBLAZE
 	select HAVE_ARCH_KGDB
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_GRAPH_TRACER
@@ -67,9 +66,6 @@ config STACKTRACE_SUPPORT
 config LOCKDEP_SUPPORT
 	def_bool y
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -271,6 +267,9 @@ config PCI
 config PCI_DOMAINS
 	def_bool PCI
 
+config PCI_DOMAINS_GENERIC
+	def_bool PCI_DOMAINS
+
 config PCI_SYSCALL
 	def_bool PCI
 
diff --git a/arch/microblaze/configs/mmu_defconfig b/arch/microblaze/configs/mmu_defconfig
index e2f6543b91e7..dc5dd5b69fde 100644
--- a/arch/microblaze/configs/mmu_defconfig
+++ b/arch/microblaze/configs/mmu_defconfig
@@ -87,5 +87,4 @@ CONFIG_KGDB_KDB=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_KEYS=y
 CONFIG_ENCRYPTED_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index a29ebd4a9fcb..4cdaf565e638 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -92,7 +92,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_KEYS=y
 CONFIG_ENCRYPTED_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
diff --git a/arch/microblaze/include/asm/checksum.h b/arch/microblaze/include/asm/checksum.h
index 0185cbefdda4..adeecebbb0d1 100644
--- a/arch/microblaze/include/asm/checksum.h
+++ b/arch/microblaze/include/asm/checksum.h
@@ -16,8 +16,8 @@
  */
 #define csum_tcpudp_nofold	csum_tcpudp_nofold
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	__asm__("add %0, %0, %1\n\t"
 		"addc %0, %0, %2\n\t"
diff --git a/arch/microblaze/include/asm/dma-mapping.h b/arch/microblaze/include/asm/dma-mapping.h
index 24b12970c9cf..1884783d15c0 100644
--- a/arch/microblaze/include/asm/dma-mapping.h
+++ b/arch/microblaze/include/asm/dma-mapping.h
@@ -44,8 +44,6 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 	return &dma_direct_ops;
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 static inline void __dma_sync(unsigned long paddr,
 			      size_t size, enum dma_data_direction direction)
 {
diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/microblaze/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/microblaze/include/asm/highmem.h b/arch/microblaze/include/asm/highmem.h
index d04638932438..67925ef18cfa 100644
--- a/arch/microblaze/include/asm/highmem.h
+++ b/arch/microblaze/include/asm/highmem.h
@@ -76,19 +76,6 @@ static inline void *kmap_atomic(struct page *page)
 	return kmap_atomic_prot(page, kmap_prot);
 }
 
-static inline struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long idx, vaddr = (unsigned long) ptr;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-
 #define flush_cache_kmaps()	{ flush_icache(); flush_dcache(); }
 
 #endif /* __KERNEL__ */
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index dc9eb6657e3a..fc3ecb55f1b2 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -22,8 +22,6 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 
-#include <asm-generic/pci-dma-compat.h>
-
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
 
diff --git a/arch/microblaze/kernel/dma.c b/arch/microblaze/kernel/dma.c
index c89da6312954..bf4dec229437 100644
--- a/arch/microblaze/kernel/dma.c
+++ b/arch/microblaze/kernel/dma.c
@@ -61,7 +61,8 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	/* FIXME this part of code is untested */
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg);
-		__dma_sync(sg_phys(sg), sg->length, direction);
+		__dma_sync(page_to_phys(sg_page(sg)) + sg->offset,
+							sg->length, direction);
 	}
 
 	return nents;
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 89a2a9394927..f31ebb5dc26c 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -130,8 +130,6 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	memset(__bss_start, 0, __bss_stop-__bss_start);
 	memset(_ssbss, 0, _esbss-_ssbss);
 
-	lockdep_init();
-
 /* initialize device tree for usage in early_printk */
 	early_init_devtree(_fdt_start);
 
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index be9488d69734..0a47f0410554 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -36,6 +36,7 @@ SECTIONS {
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		. = ALIGN (4) ;
 		_etext = . ;
 	}
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index ae838ed5fcf2..35654be3f1c0 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -123,17 +123,6 @@ unsigned long pci_address_to_pio(phys_addr_t address)
 }
 EXPORT_SYMBOL_GPL(pci_address_to_pio);
 
-/*
- * Return the domain number for this bus.
- */
-int pci_domain_nr(struct pci_bus *bus)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
-	return hose->global_number;
-}
-EXPORT_SYMBOL(pci_domain_nr);
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -863,26 +852,10 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	/* When called from the generic PCI probe, read PCI<->PCI bridge
-	 * bases. This is -not- called when generating the PCI tree from
-	 * the OF device-tree.
-	 */
-	if (bus->self != NULL)
-		pci_read_bridge_bases(bus);
-
-	/* Now fixup the bus bus */
-	pcibios_setup_bus_self(bus);
-
-	/* Now fixup devices on that bus */
-	pcibios_setup_bus_devices(bus);
+	/* nothing to do */
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
-static int skip_isa_ioresource_align(struct pci_dev *dev)
-{
-	return 0;
-}
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
@@ -899,20 +872,18 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
-	struct pci_dev *dev = data;
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		if (skip_isa_ioresource_align(dev))
-			return start;
-		if (start & 0x300)
-			start = (start + 0x3ff) & ~0x3ff;
-	}
-
-	return start;
+	return res->start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
+int pcibios_add_device(struct pci_dev *dev)
+{
+	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(pcibios_add_device);
+
 /*
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
@@ -1333,13 +1304,6 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 }
 
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	return of_node_get(hose->dn);
-}
-
 static void pcibios_scan_phb(struct pci_controller *hose)
 {
 	LIST_HEAD(resources);
diff --git a/arch/mips/Kbuild b/arch/mips/Kbuild
index dd295335891a..5c3f688a5232 100644
--- a/arch/mips/Kbuild
+++ b/arch/mips/Kbuild
@@ -17,6 +17,7 @@ obj- := $(platform-)
 obj-y += kernel/
 obj-y += mm/
 obj-y += net/
+obj-y += vdso/
 
 ifdef CONFIG_KVM
 obj-y += kvm/
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index a424e46b50af..c5cd63a4b6d5 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -21,6 +21,7 @@ platforms += mti-malta
 platforms += mti-sead3
 platforms += netlogic
 platforms += paravirt
+platforms += pic32
 platforms += pistachio
 platforms += pmcs-msp71xx
 platforms += pnx833x
@@ -33,6 +34,7 @@ platforms += sibyte
 platforms += sni
 platforms += txx9
 platforms += vr41xx
+platforms += xilfpga
 
 # include the platform specific files
 include $(patsubst %, $(srctree)/arch/mips/%/Platform, $(platforms))
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e3aa5b0b4ef1..2018c2b0e078 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,6 +5,7 @@ config MIPS
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
+	select ARCH_USE_BUILTIN_BSWAP
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_IDE
@@ -30,7 +31,6 @@ config MIPS
 	select RTC_LIB if !MACH_LOONGSON64
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DMA_API_DEBUG
 	select GENERIC_IRQ_PROBE
@@ -60,6 +60,8 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select HAVE_IRQ_TIME_ACCOUNTING
+	select GENERIC_TIME_VSYSCALL
+	select ARCH_CLOCKSOURCE_DATA
 
 menu "Machine selection"
 
@@ -149,6 +151,7 @@ config BMIPS_GENERIC
 	select CSRC_R4K
 	select SYNC_R4K
 	select COMMON_CLK
+	select BCM6345_L1_IRQ
 	select BCM7038_L1_IRQ
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
@@ -167,6 +170,7 @@ config BMIPS_GENERIC
 	select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
 	select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Build a generic DT-based kernel image that boots on select
 	  BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
@@ -324,7 +328,6 @@ config LANTIQ
 	select ARCH_REQUIRE_GPIOLIB
 	select SWAP_IO_SPACE
 	select BOOT_RAW
-	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
 	select USE_OF
 	select PINCTRL
@@ -401,6 +404,28 @@ config MACH_PISTACHIO
 	help
 	  This enables support for the IMG Pistachio SoC platform.
 
+config MACH_XILFPGA
+	bool "MIPSfpga Xilinx based boards"
+	select ARCH_REQUIRE_GPIOLIB
+	select BOOT_ELF32
+	select BOOT_RAW
+	select BUILTIN_DTB
+	select CEVT_R4K
+	select COMMON_CLK
+	select CSRC_R4K
+	select IRQ_MIPS_CPU
+	select LIBFDT
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_ZBOOT_UART16550
+	select USE_OF
+	select USE_GENERIC_EARLY_PRINTK_8250
+	help
+	  This enables support for the IMG University Program MIPSfpga platform.
+
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -424,6 +449,7 @@ config MIPS_MALTA
 	select MIPS_L1_CACHE_SHIFT_6
 	select PCI_GT64XXX_PCI0
 	select MIPS_MSC
+	select SMP_UP if SMP
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -449,10 +475,20 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_ZBOOT
 	select USE_OF
 	select ZONE_DMA32 if 64BIT
+	select BUILTIN_DTB
+	select LIBFDT
 	help
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
 
+config MACH_PIC32
+	bool "Microchip PIC32 Family"
+	help
+	  This enables support for the Microchip PIC32 family of platforms.
+
+	  Microchip PIC32 is a family of general-purpose 32 bit MIPS core
+	  microcontrollers.
+
 config MIPS_SEAD3
 	bool "MIPS SEAD3 board"
 	select BOOT_ELF32
@@ -553,7 +589,6 @@ config RALINK
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MIPS16
 	select SYS_HAS_EARLY_PRINTK
-	select HAVE_MACH_CLKDEV
 	select CLKDEV_LOOKUP
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
@@ -952,6 +987,7 @@ source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
+source "arch/mips/pic32/Kconfig"
 source "arch/mips/pistachio/Kconfig"
 source "arch/mips/pmcs-msp71xx/Kconfig"
 source "arch/mips/ralink/Kconfig"
@@ -964,6 +1000,7 @@ source "arch/mips/loongson32/Kconfig"
 source "arch/mips/loongson64/Kconfig"
 source "arch/mips/netlogic/Kconfig"
 source "arch/mips/paravirt/Kconfig"
+source "arch/mips/xilfpga/Kconfig"
 
 endmenu
 
@@ -1036,6 +1073,9 @@ config CSRC_R4K
 config CSRC_SB1250
 	bool
 
+config MIPS_CLOCK_VSYSCALL
+	def_bool CSRC_R4K || CLKSRC_MIPS_GIC
+
 config GPIO_TXX9
 	select ARCH_REQUIRE_GPIOLIB
 	bool
@@ -1724,6 +1764,10 @@ config SYS_SUPPORTS_ZBOOT_UART16550
 	bool
 	select SYS_SUPPORTS_ZBOOT
 
+config SYS_SUPPORTS_ZBOOT_UART_PROM
+	bool
+	select SYS_SUPPORTS_ZBOOT
+
 config CPU_LOONGSON2
 	bool
 	select CPU_SUPPORTS_32BIT_KERNEL
@@ -1986,7 +2030,8 @@ config KVM_GUEST
 	bool "KVM Guest Kernel"
 	depends on BROKEN_ON_SMP
 	help
-	  Select this option if building a guest kernel for KVM (Trap & Emulate) mode
+	  Select this option if building a guest kernel for KVM (Trap & Emulate)
+	  mode.
 
 config KVM_GUEST_TIMER_FREQ
 	int "Count/Compare Timer Frequency (MHz)"
@@ -2039,7 +2084,7 @@ config PAGE_SIZE_32KB
 
 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on !CPU_R3000 && !CPU_TX39XX
+	depends on !CPU_R3000 && !CPU_TX39XX && !CPU_R6000
 	help
 	  Using 64kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
@@ -2123,7 +2168,6 @@ config MIPS_MT_SMP
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select SYNC_R4K
-	select MIPS_GIC_IPI
 	select MIPS_MT
 	select SMP
 	select SMP_UP
@@ -2221,7 +2265,6 @@ config MIPS_VPE_APSP_API_MT
 config MIPS_CMP
 	bool "MIPS CMP framework support (DEPRECATED)"
 	depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
-	select MIPS_GIC_IPI
 	select SMP
 	select SYNC_R4K
 	select SYS_SUPPORTS_SMP
@@ -2241,7 +2284,6 @@ config MIPS_CPS
 	select MIPS_CM
 	select MIPS_CPC
 	select MIPS_CPS_PM if HOTPLUG_CPU
-	select MIPS_GIC_IPI
 	select SMP
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
 	select SYS_SUPPORTS_HOTPLUG_CPU
@@ -2259,9 +2301,6 @@ config MIPS_CPS_PM
 	select MIPS_CPC
 	bool
 
-config MIPS_GIC_IPI
-	bool
-
 config MIPS_CM
 	bool
 
@@ -2529,6 +2568,9 @@ choice
 	help
 	 Allows the configuration of the timer frequency.
 
+	config HZ_24
+		bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
+
 	config HZ_48
 		bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
 
@@ -2552,6 +2594,9 @@ choice
 
 endchoice
 
+config SYS_SUPPORTS_24HZ
+	bool
+
 config SYS_SUPPORTS_48HZ
 	bool
 
@@ -2575,13 +2620,18 @@ config SYS_SUPPORTS_1024HZ
 
 config SYS_SUPPORTS_ARBIT_HZ
 	bool
-	default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
-		     !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
-		     !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+	default y if !SYS_SUPPORTS_24HZ && \
+		     !SYS_SUPPORTS_48HZ && \
+		     !SYS_SUPPORTS_100HZ && \
+		     !SYS_SUPPORTS_128HZ && \
+		     !SYS_SUPPORTS_250HZ && \
+		     !SYS_SUPPORTS_256HZ && \
+		     !SYS_SUPPORTS_1000HZ && \
 		     !SYS_SUPPORTS_1024HZ
 
 config HZ
 	int
+	default 24 if HZ_24
 	default 48 if HZ_48
 	default 100 if HZ_100
 	default 128 if HZ_128
@@ -2685,7 +2735,7 @@ config BUILTIN_DTB
 	bool
 
 choice
-	prompt "Kernel appended dtb support" if OF
+	prompt "Kernel appended dtb support" if USE_OF
 	default MIPS_NO_APPENDED_DTB
 
 	config MIPS_NO_APPENDED_DTB
@@ -2693,6 +2743,20 @@ choice
 		help
 		  Do not enable appended dtb support.
 
+	config MIPS_ELF_APPENDED_DTB
+		bool "vmlinux"
+		help
+		  With this option, the boot code will look for a device tree binary
+		  DTB) included in the vmlinux ELF section .appended_dtb. By default
+		  it is empty and the DTB can be appended using binutils command
+		  objcopy:
+
+		    objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
+
+		  This is meant as a backward compatiblity convenience for those
+		  systems with a bootloader that can't be upgraded to accommodate
+		  the documented boot protocol using a device tree.
+
 	config MIPS_RAW_APPENDED_DTB
 		bool "vmlinux.bin"
 		help
@@ -2729,6 +2793,25 @@ choice
 		  if you don't intend to always append a DTB.
 endchoice
 
+choice
+	prompt "Kernel command line type" if !CMDLINE_OVERRIDE
+	default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
+					 !MIPS_MALTA && !MIPS_SEAD3 && \
+					 !CAVIUM_OCTEON_SOC
+	default MIPS_CMDLINE_FROM_BOOTLOADER
+
+	config MIPS_CMDLINE_FROM_DTB
+		depends on USE_OF
+		bool "Dtb kernel arguments if available"
+
+	config MIPS_CMDLINE_DTB_EXTEND
+		depends on USE_OF
+		bool "Extend dtb kernel arguments with bootloader arguments"
+
+	config MIPS_CMDLINE_FROM_BOOTLOADER
+		bool "Bootloader kernel arguments if available"
+endchoice
+
 endmenu
 
 config LOCKDEP_SUPPORT
@@ -2739,6 +2822,10 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	bool
+	default y
+
 config PGTABLE_LEVELS
 	int
 	default 3 if 64BIT && !PAGE_SIZE_64KB
@@ -2782,8 +2869,6 @@ config PCI_DOMAINS
 
 source "drivers/pci/Kconfig"
 
-source "drivers/pci/pcie/Kconfig"
-
 #
 # ISA support is now enabled via select.  Too many systems still have the one
 # or other ISA chip on the board that users don't know about so don't expect
@@ -2843,8 +2928,6 @@ config ZONE_DMA32
 
 source "drivers/pcmcia/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
 config RAPIDIO
 	tristate "RapidIO support"
 	depends on PCI
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index e250524021ac..f0e314ceb8ba 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -113,4 +113,76 @@ config SPINLOCK_TEST
 	help
 	  Add several files to the debugfs to test spinlock speed.
 
+if CPU_MIPSR6
+
+choice
+	prompt "Compact branch policy"
+	default MIPS_COMPACT_BRANCHES_OPTIMAL
+
+config MIPS_COMPACT_BRANCHES_NEVER
+	bool "Never (force delay slot branches)"
+	help
+	  Pass the -mcompact-branches=never flag to the compiler in order to
+	  force it to always emit branches with delay slots, and make no use
+	  of the compact branch instructions introduced by MIPSr6. This is
+	  useful if you suspect there may be an issue with compact branches in
+	  either the compiler or the CPU.
+
+config MIPS_COMPACT_BRANCHES_OPTIMAL
+	bool "Optimal (use where beneficial)"
+	help
+	  Pass the -mcompact-branches=optimal flag to the compiler in order for
+	  it to make use of compact branch instructions where it deems them
+	  beneficial, and use branches with delay slots elsewhere. This is the
+	  default compiler behaviour, and should be used unless you have a
+	  reason to choose otherwise.
+
+config MIPS_COMPACT_BRANCHES_ALWAYS
+	bool "Always (force compact branches)"
+	help
+	  Pass the -mcompact-branches=always flag to the compiler in order to
+	  force it to always emit compact branches, making no use of branch
+	  instructions with delay slots. This can result in more compact code
+	  which may be beneficial in some scenarios.
+
+endchoice
+
+endif # CPU_MIPSR6
+
+config SCACHE_DEBUGFS
+	bool "L2 cache debugfs entries"
+	depends on DEBUG_FS
+	help
+	  Enable this to allow parts of the L2 cache configuration, such as
+	  whether or not prefetching is enabled, to be exposed to userland
+	  via debugfs.
+
+	  If unsure, say N.
+
+menuconfig MIPS_CPS_NS16550
+	bool "CPS SMP NS16550 UART output"
+	depends on MIPS_CPS
+	help
+	  Output debug information via an ns16550 compatible UART if exceptions
+	  occur early in the boot process of a secondary core.
+
+if MIPS_CPS_NS16550
+
+config MIPS_CPS_NS16550_BASE
+	hex "UART Base Address"
+	default 0x1b0003f8 if MIPS_MALTA
+	help
+	  The base address of the ns16550 compatible UART on which to output
+	  debug information from the early stages of core startup.
+
+config MIPS_CPS_NS16550_SHIFT
+	int "UART Register Shift"
+	default 0 if MIPS_MALTA
+	help
+	  The number of bits to shift ns16550 register indices by in order to
+	  form their addresses. That is, log base 2 of the span between
+	  adjacent ns16550 registers in the system.
+
+endif # MIPS_CPS_NS16550
+
 endmenu
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 252e347958f3..e78d60dbdffd 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -166,16 +166,6 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
 endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
-#
-# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
-# as MIPS64 R1; older versions as just R1.  This leaves the possibility open
-# that GCC might generate R2 code for -march=loongson3a which then is rejected
-# by GAS.  The cc-option can't probe for this behaviour so -march=loongson3a
-# can't easily be used safely within the kbuild framework.
-#
-cflags-$(CONFIG_CPU_LOONGSON3)  +=					\
-	$(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-	-Wa,-mips64r2 -Wa,--trap
 
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
@@ -204,6 +194,10 @@ toolchain-msa				:= $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(
 cflags-$(toolchain-msa)			+= -DTOOLCHAIN_SUPPORTS_MSA
 endif
 
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_NEVER)	+= -mcompact-branches=never
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_OPTIMAL)	+= -mcompact-branches=optimal
+cflags-$(CONFIG_MIPS_COMPACT_BRANCHES_ALWAYS)	+= -mcompact-branches=always
+
 #
 # Firmware support
 #
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 745695db5ba0..f2f264b5aafe 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -261,7 +261,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	au1x_dma_chan_t *cp;
 
 	/*
-	 * We do the intialization on the first channel allocation.
+	 * We do the initialization on the first channel allocation.
 	 * We have to wait because of the interrupt handler initialization
 	 * which can't be done successfully during board set up.
 	 */
@@ -964,7 +964,7 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	dp->dscr_source1 = dscr->dscr_source1;
 	dp->dscr_cmd1 = dscr->dscr_cmd1;
 	nbytes = dscr->dscr_cmd1;
-	/* Allow the caller to specifiy if an interrupt is generated */
+	/* Allow the caller to specify if an interrupt is generated */
 	dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
 	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
 	ctp->chan_ptr->ddma_dbell = 0;
diff --git a/arch/mips/alchemy/common/gpiolib.c b/arch/mips/alchemy/common/gpiolib.c
index f9bc4f520440..e6b90e72c23f 100644
--- a/arch/mips/alchemy/common/gpiolib.c
+++ b/arch/mips/alchemy/common/gpiolib.c
@@ -40,7 +40,7 @@
 
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
-	return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
+	return !!alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
 }
 
 static void gpio2_set(struct gpio_chip *chip, unsigned offset, int value)
@@ -68,7 +68,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
 
 static int gpio1_get(struct gpio_chip *chip, unsigned offset)
 {
-	return alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
+	return !!alchemy_gpio1_get_value(offset + ALCHEMY_GPIO1_BASE);
 }
 
 static void gpio1_set(struct gpio_chip *chip,
@@ -119,7 +119,7 @@ struct gpio_chip alchemy_gpio_chip[] = {
 
 static int alchemy_gpic_get(struct gpio_chip *chip, unsigned int off)
 {
-	return au1300_gpio_get_value(off + AU1300_GPIO_BASE);
+	return !!au1300_gpio_get_value(off + AU1300_GPIO_BASE);
 }
 
 static void alchemy_gpic_set(struct gpio_chip *chip, unsigned int off, int v)
@@ -160,14 +160,14 @@ static int __init alchemy_gpiochip_init(void)
 
 	switch (alchemy_get_cputype()) {
 	case ALCHEMY_CPU_AU1000:
-		ret = gpiochip_add(&alchemy_gpio_chip[0]);
+		ret = gpiochip_add_data(&alchemy_gpio_chip[0], NULL);
 		break;
 	case ALCHEMY_CPU_AU1500...ALCHEMY_CPU_AU1200:
-		ret = gpiochip_add(&alchemy_gpio_chip[0]);
-		ret |= gpiochip_add(&alchemy_gpio_chip[1]);
+		ret = gpiochip_add_data(&alchemy_gpio_chip[0], NULL);
+		ret |= gpiochip_add_data(&alchemy_gpio_chip[1], NULL);
 		break;
 	case ALCHEMY_CPU_AU1300:
-		ret = gpiochip_add(&au1300_gpiochip);
+		ret = gpiochip_add_data(&au1300_gpiochip, NULL);
 		break;
 	}
 	return ret;
diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c
index bdeed9d13c6f..433c4b9a9f0a 100644
--- a/arch/mips/alchemy/devboards/db1000.c
+++ b/arch/mips/alchemy/devboards/db1000.c
@@ -503,15 +503,15 @@ int __init db1000_dev_setup(void)
 	if (board == BCSR_WHOAMI_DB1500) {
 		c0 = AU1500_GPIO2_INT;
 		c1 = AU1500_GPIO5_INT;
-		d0 = AU1500_GPIO0_INT;
-		d1 = AU1500_GPIO3_INT;
+		d0 = 0;	/* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO1_INT;
 		s1 = AU1500_GPIO4_INT;
 	} else if (board == BCSR_WHOAMI_DB1100) {
 		c0 = AU1100_GPIO2_INT;
 		c1 = AU1100_GPIO5_INT;
-		d0 = AU1100_GPIO0_INT;
-		d1 = AU1100_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO1_INT;
 		s1 = AU1100_GPIO4_INT;
 
@@ -545,15 +545,15 @@ int __init db1000_dev_setup(void)
 	} else if (board == BCSR_WHOAMI_DB1000) {
 		c0 = AU1000_GPIO2_INT;
 		c1 = AU1000_GPIO5_INT;
-		d0 = AU1000_GPIO0_INT;
-		d1 = AU1000_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1000_GPIO1_INT;
 		s1 = AU1000_GPIO4_INT;
 		platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
 	} else if ((board == BCSR_WHOAMI_PB1500) ||
 		   (board == BCSR_WHOAMI_PB1500R2)) {
 		c0 = AU1500_GPIO203_INT;
-		d0 = AU1500_GPIO201_INT;
+		d0 = 1; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO202_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -566,7 +566,7 @@ int __init db1000_dev_setup(void)
 		 */
 	} else if (board == BCSR_WHOAMI_PB1100) {
 		c0 = AU1100_GPIO11_INT;
-		d0 = AU1100_GPIO9_INT;
+		d0 = 9; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO10_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -583,7 +583,6 @@ int __init db1000_dev_setup(void)
 	} else
 		return 0; /* unknown board, no further dev setup to do */
 
-	irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
 	irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
 	irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
 
@@ -597,7 +596,6 @@ int __init db1000_dev_setup(void)
 		c0, d0, /*s0*/0, 0, 0);
 
 	if (twosocks) {
-		irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
 		irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
 
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 8c13675a12e7..992442a03d8b 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -200,7 +200,7 @@ static struct i2c_board_info db1200_i2c_devs[] __initdata = {
 static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
 
 	ioaddr &= 0xffffff00;
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index b58077008a53..d3c087f59f1a 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -150,7 +150,7 @@ static void __init db1300_gpio_config(void)
 static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
 
 	ioaddr &= 0xffffff00;
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 5740bcfdfc7f..1c01d6eadb08 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -128,7 +128,7 @@ static struct i2c_board_info db1550_i2c_devs[] __initdata = {
 static void au1550_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
 
 	ioaddr &= 0xffffff00;
@@ -514,7 +514,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1550_GPIO3_INT, AU1550_GPIO0_INT,
+		AU1550_GPIO3_INT, 0,
 		/*AU1550_GPIO21_INT*/0, 0, 0);
 
 	db1x_register_pcmcia_socket(
@@ -524,7 +524,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-		AU1550_GPIO5_INT, AU1550_GPIO1_INT,
+		AU1550_GPIO5_INT, 1,
 		/*AU1550_GPIO22_INT*/0, 0, 1);
 
 	platform_device_register(&db1550_nand_dev);
diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
index f4930456eb8e..ed5b3d297caf 100644
--- a/arch/mips/ar7/gpio.c
+++ b/arch/mips/ar7/gpio.c
@@ -33,17 +33,15 @@ struct ar7_gpio_chip {
 
 static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;
 
-	return readl(gpio_in) & (1 << gpio);
+	return !!(readl(gpio_in) & (1 << gpio));
 }
 
 static int titan_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_in0 = gpch->regs + TITAN_GPIO_INPUT_0;
 	void __iomem *gpio_in1 = gpch->regs + TITAN_GPIO_INPUT_1;
 
@@ -53,8 +51,7 @@ static int titan_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
 static void ar7_gpio_set_value(struct gpio_chip *chip,
 				unsigned gpio, int value)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_out = gpch->regs + AR7_GPIO_OUTPUT;
 	unsigned tmp;
 
@@ -67,8 +64,7 @@ static void ar7_gpio_set_value(struct gpio_chip *chip,
 static void titan_gpio_set_value(struct gpio_chip *chip,
 				unsigned gpio, int value)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_out0 = gpch->regs + TITAN_GPIO_OUTPUT_0;
 	void __iomem *gpio_out1 = gpch->regs + TITAN_GPIO_OUTPUT_1;
 	unsigned tmp;
@@ -81,8 +77,7 @@ static void titan_gpio_set_value(struct gpio_chip *chip,
 
 static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
 
 	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
@@ -92,8 +87,7 @@ static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 
 static int titan_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_dir0 = gpch->regs + TITAN_GPIO_DIR_0;
 	void __iomem *gpio_dir1 = gpch->regs + TITAN_GPIO_DIR_1;
 
@@ -108,8 +102,7 @@ static int titan_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 static int ar7_gpio_direction_output(struct gpio_chip *chip,
 					unsigned gpio, int value)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
 
 	ar7_gpio_set_value(chip, gpio, value);
@@ -121,8 +114,7 @@ static int ar7_gpio_direction_output(struct gpio_chip *chip,
 static int titan_gpio_direction_output(struct gpio_chip *chip,
 					unsigned gpio, int value)
 {
-	struct ar7_gpio_chip *gpch =
-				container_of(chip, struct ar7_gpio_chip, chip);
+	struct ar7_gpio_chip *gpch = gpiochip_get_data(chip);
 	void __iomem *gpio_dir0 = gpch->regs + TITAN_GPIO_DIR_0;
 	void __iomem *gpio_dir1 = gpch->regs + TITAN_GPIO_DIR_1;
 
@@ -335,7 +327,7 @@ int __init ar7_gpio_init(void)
 		return -ENOMEM;
 	}
 
-	ret = gpiochip_add(&gpch->chip);
+	ret = gpiochip_add_data(&gpch->chip, gpch);
 	if (ret) {
 		printk(KERN_ERR "%s: failed to add gpiochip\n",
 					gpch->chip.label);
diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c
index eb5117ced95a..618dfd735eed 100644
--- a/arch/mips/ath79/clock.c
+++ b/arch/mips/ath79/clock.c
@@ -26,8 +26,7 @@
 #include "common.h"
 
 #define AR71XX_BASE_FREQ	40000000
-#define AR724X_BASE_FREQ	5000000
-#define AR913X_BASE_FREQ	5000000
+#define AR724X_BASE_FREQ	40000000
 
 static struct clk *clks[3];
 static struct clk_onecell_data clk_data = {
@@ -103,8 +102,8 @@ static void __init ar724x_clocks_init(void)
 	div = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
 	freq = div * ref_rate;
 
-	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK);
-	freq *= div;
+	div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK) * 2;
+	freq /= div;
 
 	cpu_rate = freq;
 
@@ -123,39 +122,6 @@ static void __init ar724x_clocks_init(void)
 	clk_add_alias("uart", NULL, "ahb", NULL);
 }
 
-static void __init ar913x_clocks_init(void)
-{
-	unsigned long ref_rate;
-	unsigned long cpu_rate;
-	unsigned long ddr_rate;
-	unsigned long ahb_rate;
-	u32 pll;
-	u32 freq;
-	u32 div;
-
-	ref_rate = AR913X_BASE_FREQ;
-	pll = ath79_pll_rr(AR913X_PLL_REG_CPU_CONFIG);
-
-	div = ((pll >> AR913X_PLL_FB_SHIFT) & AR913X_PLL_FB_MASK);
-	freq = div * ref_rate;
-
-	cpu_rate = freq;
-
-	div = ((pll >> AR913X_DDR_DIV_SHIFT) & AR913X_DDR_DIV_MASK) + 1;
-	ddr_rate = freq / div;
-
-	div = (((pll >> AR913X_AHB_DIV_SHIFT) & AR913X_AHB_DIV_MASK) + 1) * 2;
-	ahb_rate = cpu_rate / div;
-
-	ath79_add_sys_clkdev("ref", ref_rate);
-	clks[0] = ath79_add_sys_clkdev("cpu", cpu_rate);
-	clks[1] = ath79_add_sys_clkdev("ddr", ddr_rate);
-	clks[2] = ath79_add_sys_clkdev("ahb", ahb_rate);
-
-	clk_add_alias("wdt", NULL, "ahb", NULL);
-	clk_add_alias("uart", NULL, "ahb", NULL);
-}
-
 static void __init ar933x_clocks_init(void)
 {
 	unsigned long ref_rate;
@@ -443,10 +409,8 @@ void __init ath79_clocks_init(void)
 {
 	if (soc_is_ar71xx())
 		ar71xx_clocks_init();
-	else if (soc_is_ar724x())
+	else if (soc_is_ar724x() || soc_is_ar913x())
 		ar724x_clocks_init();
-	else if (soc_is_ar913x())
-		ar913x_clocks_init();
 	else if (soc_is_ar933x())
 		ar933x_clocks_init();
 	else if (soc_is_ar934x())
diff --git a/arch/mips/ath79/common.h b/arch/mips/ath79/common.h
index ca7cc19adfea..870c6b2e97e8 100644
--- a/arch/mips/ath79/common.h
+++ b/arch/mips/ath79/common.h
@@ -23,7 +23,6 @@ void ath79_clocks_init(void);
 unsigned long ath79_get_sys_clk_rate(const char *id);
 
 void ath79_ddr_ctrl_init(void);
-void ath79_ddr_wb_flush(unsigned int reg);
 
 void ath79_gpio_init(void);
 
diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c
index eeb3953ed8ac..2dfff1f19004 100644
--- a/arch/mips/ath79/irq.c
+++ b/arch/mips/ath79/irq.c
@@ -26,98 +26,6 @@
 #include "common.h"
 #include "machtypes.h"
 
-static void ath79_misc_irq_handler(struct irq_desc *desc)
-{
-	void __iomem *base = ath79_reset_base;
-	u32 pending;
-
-	pending = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS) &
-		  __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	while (pending) {
-		int bit = __ffs(pending);
-
-		generic_handle_irq(ATH79_MISC_IRQ(bit));
-		pending &= ~BIT(bit);
-	}
-}
-
-static void ar71xx_misc_irq_unmask(struct irq_data *d)
-{
-	unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
-	void __iomem *base = ath79_reset_base;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-}
-
-static void ar71xx_misc_irq_mask(struct irq_data *d)
-{
-	unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
-	void __iomem *base = ath79_reset_base;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-}
-
-static void ar724x_misc_irq_ack(struct irq_data *d)
-{
-	unsigned int irq = d->irq - ATH79_MISC_IRQ_BASE;
-	void __iomem *base = ath79_reset_base;
-	u32 t;
-
-	t = __raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
-	__raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
-	/* flush write */
-	__raw_readl(base + AR71XX_RESET_REG_MISC_INT_STATUS);
-}
-
-static struct irq_chip ath79_misc_irq_chip = {
-	.name		= "MISC",
-	.irq_unmask	= ar71xx_misc_irq_unmask,
-	.irq_mask	= ar71xx_misc_irq_mask,
-};
-
-static void __init ath79_misc_irq_init(void)
-{
-	void __iomem *base = ath79_reset_base;
-	int i;
-
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
-	if (soc_is_ar71xx() || soc_is_ar913x())
-		ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	else if (soc_is_ar724x() ||
-		 soc_is_ar933x() ||
-		 soc_is_ar934x() ||
-		 soc_is_qca955x())
-		ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
-	else
-		BUG();
-
-	for (i = ATH79_MISC_IRQ_BASE;
-	     i < ATH79_MISC_IRQ_BASE + ATH79_MISC_IRQ_COUNT; i++) {
-		irq_set_chip_and_handler(i, &ath79_misc_irq_chip,
-					 handle_level_irq);
-	}
-
-	irq_set_chained_handler(ATH79_CPU_IRQ(6), ath79_misc_irq_handler);
-}
 
 static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
 {
@@ -220,139 +128,12 @@ static void qca955x_irq_init(void)
 	irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
 }
 
-/*
- * The IP2/IP3 lines are tied to a PCI/WMAC/USB device. Drivers for
- * these devices typically allocate coherent DMA memory, however the
- * DMA controller may still have some unsynchronized data in the FIFO.
- * Issue a flush in the handlers to ensure that the driver sees
- * the update.
- *
- * This array map the interrupt lines to the DDR write buffer channels.
- */
-
-static unsigned irq_wb_chan[8] = {
-	-1, -1, -1, -1, -1, -1, -1, -1,
-};
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long pending;
-	int irq;
-
-	pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (!pending) {
-		spurious_interrupt();
-		return;
-	}
-
-	pending >>= CAUSEB_IP;
-	while (pending) {
-		irq = fls(pending) - 1;
-		if (irq < ARRAY_SIZE(irq_wb_chan) && irq_wb_chan[irq] != -1)
-			ath79_ddr_wb_flush(irq_wb_chan[irq]);
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-		pending &= ~BIT(irq);
-	}
-}
-
-#ifdef CONFIG_IRQCHIP
-static int misc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-{
-	irq_set_chip_and_handler(irq, &ath79_misc_irq_chip, handle_level_irq);
-	return 0;
-}
-
-static const struct irq_domain_ops misc_irq_domain_ops = {
-	.xlate = irq_domain_xlate_onecell,
-	.map = misc_map,
-};
-
-static int __init ath79_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	void __iomem *base = ath79_reset_base;
-	struct irq_domain *domain;
-	int irq;
-
-	irq = irq_of_parse_and_map(node, 0);
-	if (!irq)
-		panic("Failed to get MISC IRQ");
-
-	domain = irq_domain_add_legacy(node, ATH79_MISC_IRQ_COUNT,
-			ATH79_MISC_IRQ_BASE, 0, &misc_irq_domain_ops, NULL);
-	if (!domain)
-		panic("Failed to add MISC irqdomain");
-
-	/* Disable and clear all interrupts */
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
-	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
-
-
-	irq_set_chained_handler(irq, ath79_misc_irq_handler);
-
-	return 0;
-}
-
-static int __init ar7100_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask;
-	return ath79_misc_intc_of_init(node, parent);
-}
-
-IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc",
-		ar7100_misc_intc_of_init);
-
-static int __init ar7240_misc_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack;
-	return ath79_misc_intc_of_init(node, parent);
-}
-
-IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc",
-		ar7240_misc_intc_of_init);
-
-static int __init ar79_cpu_intc_of_init(
-	struct device_node *node, struct device_node *parent)
-{
-	int err, i, count;
-
-	/* Fill the irq_wb_chan table */
-	count = of_count_phandle_with_args(
-		node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-
-	for (i = 0; i < count; i++) {
-		struct of_phandle_args args;
-		u32 irq = i;
-
-		of_property_read_u32_index(
-			node, "qca,ddr-wb-channel-interrupts", i, &irq);
-		if (irq >= ARRAY_SIZE(irq_wb_chan))
-			continue;
-
-		err = of_parse_phandle_with_args(
-			node, "qca,ddr-wb-channels",
-			"#qca,ddr-wb-channel-cells",
-			i, &args);
-		if (err)
-			return err;
-
-		irq_wb_chan[irq] = args.args[0];
-		pr_info("IRQ: Set flush channel of IRQ%d to %d\n",
-			irq, args.args[0]);
-	}
-
-	return mips_cpu_irq_of_init(node, parent);
-}
-IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
-		ar79_cpu_intc_of_init);
-
-#endif
-
 void __init arch_init_irq(void)
 {
+	unsigned irq_wb_chan2 = -1;
+	unsigned irq_wb_chan3 = -1;
+	bool misc_is_ar71xx;
+
 	if (mips_machtype == ATH79_MACH_GENERIC_OF) {
 		irqchip_init();
 		return;
@@ -360,14 +141,26 @@ void __init arch_init_irq(void)
 
 	if (soc_is_ar71xx() || soc_is_ar724x() ||
 	    soc_is_ar913x() || soc_is_ar933x()) {
-		irq_wb_chan[2] = 3;
-		irq_wb_chan[3] = 2;
+		irq_wb_chan2 = 3;
+		irq_wb_chan3 = 2;
 	} else if (soc_is_ar934x()) {
-		irq_wb_chan[3] = 2;
+		irq_wb_chan3 = 2;
 	}
 
-	mips_cpu_irq_init();
-	ath79_misc_irq_init();
+	ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
+
+	if (soc_is_ar71xx() || soc_is_ar913x())
+		misc_is_ar71xx = true;
+	else if (soc_is_ar724x() ||
+		 soc_is_ar933x() ||
+		 soc_is_ar934x() ||
+		 soc_is_qca955x())
+		misc_is_ar71xx = false;
+	else
+		BUG();
+	ath79_misc_irq_init(
+		ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
+		ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
 
 	if (soc_is_ar934x())
 		ar934x_ip2_irq_init();
diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index 1ba21204ebe0..be451ee4a5ea 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -36,10 +36,6 @@
 
 #define ATH79_SYS_TYPE_LEN	64
 
-#define AR71XX_BASE_FREQ	40000000
-#define AR724X_BASE_FREQ	5000000
-#define AR913X_BASE_FREQ	5000000
-
 static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
 
 static void ath79_restart(char *command)
@@ -216,9 +212,9 @@ void __init plat_mem_setup(void)
 					   AR71XX_RESET_SIZE);
 	ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
 					 AR71XX_PLL_SIZE);
+	ath79_detect_sys_type();
 	ath79_ddr_ctrl_init();
 
-	ath79_detect_sys_type();
 	if (mips_machtype != ATH79_MACH_GENERIC_OF)
 		detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
 
@@ -272,12 +268,12 @@ void __init device_tree_init(void)
 	unflatten_and_copy_device_tree();
 }
 
-static void __init ath79_generic_init(void)
-{
-	/* Nothing to do */
-}
-
 MIPS_MACHINE(ATH79_MACH_GENERIC,
 	     "Generic",
 	     "Generic AR71XX/AR724X/AR913X based board",
-	     ath79_generic_init);
+	     NULL);
+
+MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
+	     "DTB",
+	     "Generic AR71XX/AR724X/AR913X based board (DT)",
+	     NULL);
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 17503a05938e..c807e32d6d81 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -101,33 +101,13 @@ static void bcm47xx_machine_halt(void)
 }
 
 #ifdef CONFIG_BCM47XX_SSB
-static int bcm47xx_get_invariants(struct ssb_bus *bus,
-				  struct ssb_init_invariants *iv)
-{
-	char buf[20];
-
-	/* Fill boardinfo structure */
-	memset(&iv->boardinfo, 0 , sizeof(struct ssb_boardinfo));
-
-	bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
-
-	memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
-	bcm47xx_fill_sprom(&iv->sprom, NULL, false);
-
-	if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
-		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
-
-	return 0;
-}
-
 static void __init bcm47xx_register_ssb(void)
 {
 	int err;
 	char buf[100];
 	struct ssb_mipscore *mcore;
 
-	err = ssb_bus_ssbbus_register(&bcm47xx_bus.ssb, SSB_ENUM_BASE,
-				      bcm47xx_get_invariants);
+	err = ssb_bus_host_soc_register(&bcm47xx_bus.ssb, SSB_ENUM_BASE);
 	if (err)
 		panic("Failed to initialize SSB bus (err %d)", err);
 
diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index 2d5c7a7f24bb..ca7ad131d057 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -60,9 +60,9 @@ static int get_nvram_var(const char *prefix, const char *postfix,
 }
 
 #define NVRAM_READ_VAL(type)						\
-static void nvram_read_ ## type (const char *prefix,			\
-				 const char *postfix, const char *name, \
-				 type *val, type allset, bool fallback) \
+static void nvram_read_ ## type(const char *prefix,			\
+				const char *postfix, const char *name,	\
+				type *val, type allset, bool fallback)	\
 {									\
 	char buf[100];							\
 	int err;							\
@@ -422,7 +422,10 @@ static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
-		struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
 		snprintf(postfix, sizeof(postfix), "%i", i);
 		nvram_read_u8(prefix, postfix, "maxp2ga",
 			      &pwr_info->maxpwr_2g, 0, fallback);
@@ -470,7 +473,10 @@ static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
-		struct ssb_sprom_core_pwr_info *pwr_info = &sprom->core_pwr_info[i];
+		struct ssb_sprom_core_pwr_info *pwr_info;
+
+		pwr_info = &sprom->core_pwr_info[i];
+
 		snprintf(postfix, sizeof(postfix), "%i", i);
 		nvram_read_u16(prefix, postfix, "pa2gw3a",
 			       &pwr_info->pa_2g[3], 0, fallback);
@@ -535,10 +541,11 @@ static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
 	nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
 
 	/* The address prefix 00:90:4C is used by Broadcom in their initial
-	   configuration. When a mac address with the prefix 00:90:4C is used
-	   all devices from the same series are sharing the same mac address.
-	   To prevent mac address collisions we replace them with a mac address
-	   based on the base address. */
+	 * configuration. When a mac address with the prefix 00:90:4C is used
+	 * all devices from the same series are sharing the same mac address.
+	 * To prevent mac address collisions we replace them with a mac address
+	 * based on the base address.
+	 */
 	if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
 		u8 mac[6];
 
@@ -592,32 +599,23 @@ void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
 	bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
 }
 
-#ifdef CONFIG_BCM47XX_SSB
-void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
-				const char *prefix)
-{
-	nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0,
-		       true);
-	if (!boardinfo->vendor)
-		boardinfo->vendor = SSB_BOARDVENDOR_BCM;
-
-	nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0, true);
-}
-#endif
-
 #if defined(CONFIG_BCM47XX_SSB)
 static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
 {
 	char prefix[10];
 
-	if (bus->bustype == SSB_BUSTYPE_PCI) {
+	switch (bus->bustype) {
+	case SSB_BUSTYPE_SSB:
+		bcm47xx_fill_sprom(out, NULL, false);
+		return 0;
+	case SSB_BUSTYPE_PCI:
 		memset(out, 0, sizeof(struct ssb_sprom));
 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
 			 bus->host_pci->bus->number + 1,
 			 PCI_SLOT(bus->host_pci->devfn));
 		bcm47xx_fill_sprom(out, prefix, false);
 		return 0;
-	} else {
+	default:
 		pr_warn("Unable to fill SPROM for given bustype.\n");
 		return -EINVAL;
 	}
@@ -668,9 +666,15 @@ static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
 	switch (bus->hosttype) {
 	case BCMA_HOSTTYPE_PCI:
 		memset(out, 0, sizeof(struct ssb_sprom));
-		snprintf(buf, sizeof(buf), "pci/%u/%u/",
-			 bus->host_pci->bus->number + 1,
-			 PCI_SLOT(bus->host_pci->devfn));
+		/* On BCM47XX all PCI buses share the same domain */
+		if (config_enabled(CONFIG_BCM47XX))
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 bus->host_pci->bus->number + 1,
+				 PCI_SLOT(bus->host_pci->devfn));
+		else
+			snprintf(buf, sizeof(buf), "pci/%u/%u/",
+				 pci_domain_nr(bus->host_pci->bus) + 1,
+				 bus->host_pci->bus->number);
 		bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
 		prefix = buf;
 		break;
@@ -710,11 +714,11 @@ void bcm47xx_sprom_register_fallbacks(void)
 {
 #if defined(CONFIG_BCM47XX_SSB)
 	if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
-		pr_warn("Failed to registered ssb SPROM handler\n");
+		pr_warn("Failed to register ssb SPROM handler\n");
 #endif
 
 #if defined(CONFIG_BCM47XX_BCMA)
 	if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
-		pr_warn("Failed to registered bcma SPROM handler\n");
+		pr_warn("Failed to register bcma SPROM handler\n");
 #endif
 }
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index 33727e7f0c79..b2097c0d2ed7 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -7,6 +7,8 @@
  * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -31,7 +33,6 @@
 
 #include <uapi/linux/bcm933xx_hcs.h>
 
-#define PFX	"board_bcm963xx: "
 
 #define HCS_OFFSET_128K			0x20000
 
@@ -740,7 +741,7 @@ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
 		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
 		return 0;
 	} else {
-		printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
+		pr_err("unable to fill SPROM for given bustype\n");
 		return -EINVAL;
 	}
 }
@@ -784,7 +785,7 @@ void __init board_prom_init(void)
 			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
 	else
 		strcpy(cfe_version, "unknown");
-	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+	pr_info("CFE version: %s\n", cfe_version);
 
 	bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
 
@@ -808,8 +809,7 @@ void __init board_prom_init(void)
 		char name[17];
 		memcpy(name, board_name, 16);
 		name[16] = 0;
-		printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
-		       name);
+		pr_err("unknown bcm963xx board: %s\n", name);
 		return;
 	}
 
@@ -854,7 +854,7 @@ void __init board_setup(void)
 {
 	if (!board.name[0])
 		panic("unable to detect bcm963xx board");
-	printk(KERN_INFO PFX "board name: %s\n", board.name);
+	pr_info("board name: %s\n", board.name);
 
 	/* make sure we're running on expected cpu */
 	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
@@ -910,7 +910,7 @@ int __init board_register_devices(void)
 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
 		if (ssb_arch_register_fallback_sprom(
 				&bcm63xx_get_fallback_sprom) < 0)
-			pr_err(PFX "failed to register fallback SPROM\n");
+			pr_err("failed to register fallback SPROM\n");
 	}
 #endif
 
diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c
index 307ec8b8e41c..1c7c3fbfa1f3 100644
--- a/arch/mips/bcm63xx/cpu.c
+++ b/arch/mips/bcm63xx/cpu.c
@@ -376,10 +376,10 @@ void __init bcm63xx_cpu_init(void)
 	bcm63xx_cpu_freq = detect_cpu_clock();
 	bcm63xx_memory_size = detect_memory_size();
 
-	printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n",
-	       bcm63xx_cpu_id, bcm63xx_cpu_rev);
-	printk(KERN_INFO "CPU frequency is %u MHz\n",
-	       bcm63xx_cpu_freq / 1000000);
-	printk(KERN_INFO "%uMB of RAM installed\n",
-	       bcm63xx_memory_size >> 20);
+	pr_info("Detected Broadcom 0x%04x CPU revision %02x\n",
+		bcm63xx_cpu_id, bcm63xx_cpu_rev);
+	pr_info("CPU frequency is %u MHz\n",
+		bcm63xx_cpu_freq / 1000000);
+	pr_info("%uMB of RAM installed\n",
+		bcm63xx_memory_size >> 20);
 }
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
index a551bab5ecb9..9496cd236951 100644
--- a/arch/mips/bcm63xx/dev-pcmcia.c
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -139,6 +139,6 @@ int __init bcm63xx_pcmcia_register(void)
 	return platform_device_register(&bcm63xx_pcmcia_device);
 
 out_err:
-	printk(KERN_ERR "unable to set pcmcia chip select\n");
+	pr_err("unable to set pcmcia chip select\n");
 	return ret;
 }
diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c
index 468bc7b99cd3..7c256dadb166 100644
--- a/arch/mips/bcm63xx/gpio.c
+++ b/arch/mips/bcm63xx/gpio.c
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_gpio.h>
@@ -147,5 +147,5 @@ int __init bcm63xx_gpio_init(void)
 	bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
 	pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
 
-	return gpiochip_add(&bcm63xx_gpio_chip);
+	return gpiochip_add_data(&bcm63xx_gpio_chip, NULL);
 }
diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c
index 1a47ec2a0906..c96139097ae2 100644
--- a/arch/mips/bcm63xx/irq.c
+++ b/arch/mips/bcm63xx/irq.c
@@ -311,7 +311,7 @@ static int bcm63xx_external_irq_set_type(struct irq_data *d,
 		break;
 
 	default:
-		printk(KERN_ERR "bogus flow type combination given !\n");
+		pr_err("bogus flow type combination given !\n");
 		return -EINVAL;
 	}
 
diff --git a/arch/mips/bcm63xx/nvram.c b/arch/mips/bcm63xx/nvram.c
index 4b50d40f7451..05757aed016c 100644
--- a/arch/mips/bcm63xx/nvram.c
+++ b/arch/mips/bcm63xx/nvram.c
@@ -10,6 +10,7 @@
 
 #define pr_fmt(fmt) "bcm63xx_nvram: " fmt
 
+#include <linux/bcm963xx_nvram.h>
 #include <linux/init.h>
 #include <linux/crc32.h>
 #include <linux/export.h>
@@ -18,23 +19,6 @@
 
 #include <bcm63xx_nvram.h>
 
-/*
- * nvram structure
- */
-struct bcm963xx_nvram {
-	u32	version;
-	u8	reserved1[256];
-	u8	name[16];
-	u32	main_tp_number;
-	u32	psi_size;
-	u32	mac_addr_count;
-	u8	mac_addr_base[ETH_ALEN];
-	u8	reserved2[2];
-	u32	checksum_old;
-	u8	reserved3[720];
-	u32	checksum_high;
-};
-
 #define BCM63XX_DEFAULT_PSI_SIZE	64
 
 static struct bcm963xx_nvram nvram;
@@ -42,27 +26,14 @@ static int mac_addr_used;
 
 void __init bcm63xx_nvram_init(void *addr)
 {
-	unsigned int check_len;
 	u32 crc, expected_crc;
 	u8 hcs_mac_addr[ETH_ALEN] = { 0x00, 0x10, 0x18, 0xff, 0xff, 0xff };
 
 	/* extract nvram data */
-	memcpy(&nvram, addr, sizeof(nvram));
+	memcpy(&nvram, addr, BCM963XX_NVRAM_V5_SIZE);
 
 	/* check checksum before using data */
-	if (nvram.version <= 4) {
-		check_len = offsetof(struct bcm963xx_nvram, reserved3);
-		expected_crc = nvram.checksum_old;
-		nvram.checksum_old = 0;
-	} else {
-		check_len = sizeof(nvram);
-		expected_crc = nvram.checksum_high;
-		nvram.checksum_high = 0;
-	}
-
-	crc = crc32_le(~0, (u8 *)&nvram, check_len);
-
-	if (crc != expected_crc)
+	if (bcm963xx_nvram_checksum(&nvram, &expected_crc, &crc))
 		pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
 			expected_crc, crc);
 
diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c
index 240fb4ffa55c..2be9caaa2085 100644
--- a/arch/mips/bcm63xx/setup.c
+++ b/arch/mips/bcm63xx/setup.c
@@ -24,7 +24,7 @@
 
 void bcm63xx_machine_halt(void)
 {
-	printk(KERN_INFO "System halted\n");
+	pr_info("System halted\n");
 	while (1)
 		;
 }
@@ -34,7 +34,7 @@ static void bcm6348_a1_reboot(void)
 	u32 reg;
 
 	/* soft reset all blocks */
-	printk(KERN_INFO "soft-resetting all blocks ...\n");
+	pr_info("soft-resetting all blocks ...\n");
 	reg = bcm_perf_readl(PERF_SOFTRESET_REG);
 	reg &= ~SOFTRESET_6348_ALL;
 	bcm_perf_writel(reg, PERF_SOFTRESET_REG);
@@ -46,7 +46,7 @@ static void bcm6348_a1_reboot(void)
 	mdelay(10);
 
 	/* Jump to the power on address. */
-	printk(KERN_INFO "jumping to reset vector.\n");
+	pr_info("jumping to reset vector.\n");
 	/* set high vectors (base at 0xbfc00000 */
 	set_c0_status(ST0_BEV | ST0_ERL);
 	/* run uncached in kseg0 */
@@ -110,7 +110,7 @@ void bcm63xx_machine_reboot(void)
 	if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
 		bcm6348_a1_reboot();
 
-	printk(KERN_INFO "triggering watchdog soft-reset...\n");
+	pr_info("triggering watchdog soft-reset...\n");
 	if (BCMCPU_IS_6328()) {
 		bcm_wdt_writel(1, WDT_SOFTRESET_REG);
 	} else {
diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c
index 5f1135981568..2110359c00e5 100644
--- a/arch/mips/bcm63xx/timer.c
+++ b/arch/mips/bcm63xx/timer.c
@@ -195,7 +195,7 @@ int bcm63xx_timer_init(void)
 	irq = bcm63xx_get_irq_number(IRQ_TIMER);
 	ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL);
 	if (ret) {
-		printk(KERN_ERR "bcm63xx_timer: failed to register irq\n");
+		pr_err("%s: failed to register irq\n", __func__);
 		return ret;
 	}
 
diff --git a/arch/mips/bmips/irq.c b/arch/mips/bmips/irq.c
index e7fc6f9348ba..7efefcf44033 100644
--- a/arch/mips/bmips/irq.c
+++ b/arch/mips/bmips/irq.c
@@ -15,6 +15,12 @@
 #include <asm/irq_cpu.h>
 #include <asm/time.h>
 
+static const struct of_device_id smp_intc_dt_match[] = {
+	{ .compatible = "brcm,bcm7038-l1-intc" },
+	{ .compatible = "brcm,bcm6345-l1-intc" },
+	{}
+};
+
 unsigned int get_c0_compare_int(void)
 {
 	return CP0_LEGACY_COMPARE_IRQ;
@@ -24,8 +30,8 @@ void __init arch_init_irq(void)
 {
 	struct device_node *dn;
 
-	/* Only the STB (bcm7038) controller supports SMP IRQ affinity */
-	dn = of_find_compatible_node(NULL, NULL, "brcm,bcm7038-l1-intc");
+	/* Only these controllers support SMP IRQ affinity */
+	dn = of_find_matching_node(NULL, smp_intc_dt_match);
 	if (dn)
 		of_node_put(dn);
 	else
diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
index 526ec2789bb9..35535284b39e 100644
--- a/arch/mips/bmips/setup.c
+++ b/arch/mips/bmips/setup.c
@@ -105,6 +105,7 @@ static const struct bmips_quirk bmips_quirk_list[] = {
 	{ "brcm,bcm33843-viper",	&bcm3384_viper_quirks		},
 	{ "brcm,bcm6328",		&bcm6328_quirks			},
 	{ "brcm,bcm6368",		&bcm6368_quirks			},
+	{ "brcm,bcm63168",		&bcm6368_quirks			},
 	{ },
 };
 
@@ -157,7 +158,6 @@ void __init plat_mem_setup(void)
 		panic("no dtb found");
 
 	__dt_setup_arch(dtb);
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 
 	for (q = bmips_quirk_list; q->quirk_fn; q++) {
 		if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index d5bdee115f22..309d2ad67e4d 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -29,20 +29,24 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
-targets := head.o decompress.o string.o dbg.o uart-16550.o uart-alchemy.o
-
 # decompressor objects (linked with vmlinuz)
 vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o
 
 ifdef CONFIG_DEBUG_ZBOOT
 vmlinuzobjs-$(CONFIG_DEBUG_ZBOOT)		   += $(obj)/dbg.o
 vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM) += $(obj)/uart-prom.o
 vmlinuzobjs-$(CONFIG_MIPS_ALCHEMY)		   += $(obj)/uart-alchemy.o
 endif
 
-ifdef CONFIG_KERNEL_XZ
-vmlinuzobjs-y += $(obj)/../../lib/ashldi3.o
-endif
+vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o $(obj)/bswapsi.o
+
+extra-y += ashldi3.c bswapsi.c
+$(obj)/ashldi3.o $(obj)/bswapsi.o: KBUILD_CFLAGS += -I$(srctree)/arch/mips/lib
+$(obj)/ashldi3.c $(obj)/bswapsi.c: $(obj)/%.c: $(srctree)/arch/mips/lib/%.c
+	$(call cmd,shipped)
+
+targets := $(notdir $(vmlinuzobjs-y))
 
 targets += vmlinux.bin
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
@@ -60,7 +64,7 @@ targets += vmlinux.bin.z
 $(obj)/vmlinux.bin.z: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,$(tool_y))
 
-targets += piggy.o
+targets += piggy.o dummy.o
 OBJCOPYFLAGS_piggy.o := --add-section=.image=$(obj)/vmlinux.bin.z \
 			--set-section-flags=.image=contents,alloc,load,readonly,data
 $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
diff --git a/arch/mips/boot/compressed/uart-16550.c b/arch/mips/boot/compressed/uart-16550.c
index 408799a839b4..f7521142deda 100644
--- a/arch/mips/boot/compressed/uart-16550.c
+++ b/arch/mips/boot/compressed/uart-16550.c
@@ -17,7 +17,7 @@
 #define PORT(offset) (CKSEG1ADDR(AR7_REGS_UART0) + (4 * offset))
 #endif
 
-#ifdef CONFIG_MACH_JZ4740
+#if defined(CONFIG_MACH_JZ4740) || defined(CONFIG_MACH_JZ4780)
 #include <asm/mach-jz4740/base.h>
 #define PORT(offset) (CKSEG1ADDR(JZ4740_UART0_BASE_ADDR) + (4 * offset))
 #endif
diff --git a/arch/mips/boot/compressed/uart-prom.c b/arch/mips/boot/compressed/uart-prom.c
new file mode 100644
index 000000000000..1c3d51bc90bb
--- /dev/null
+++ b/arch/mips/boot/compressed/uart-prom.c
@@ -0,0 +1,7 @@
+
+extern void prom_putchar(unsigned char ch);
+
+void putc(char c)
+{
+	prom_putchar(c);
+}
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
index bac7b8dab9a4..fc7a0a98e9bf 100644
--- a/arch/mips/boot/dts/Makefile
+++ b/arch/mips/boot/dts/Makefile
@@ -4,8 +4,10 @@ dts-dirs	+= ingenic
 dts-dirs	+= lantiq
 dts-dirs	+= mti
 dts-dirs	+= netlogic
+dts-dirs	+= pic32
 dts-dirs	+= qca
 dts-dirs	+= ralink
+dts-dirs	+= xilfpga
 
 obj-y		:= $(addsuffix /, $(dts-dirs))
 
diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi
index 41891c1e58bd..9d19236f53e7 100644
--- a/arch/mips/boot/dts/brcm/bcm6328.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi
@@ -31,6 +31,7 @@
 	};
 
 	aliases {
+		leds0 = &leds0;
 		uart0 = &uart0;
 	};
 
@@ -73,7 +74,7 @@
 		timer: timer@10000040 {
 			compatible = "syscon";
 			reg = <0x10000040 0x2c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
@@ -82,5 +83,13 @@
 			offset = <0x28>;
 			mask = <0x1>;
 		};
+
+		leds0: led-controller@10000800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000800 0x24>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi
index 45152bc22117..1f6b9b5cddb4 100644
--- a/arch/mips/boot/dts/brcm/bcm6368.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi
@@ -32,6 +32,7 @@
 	};
 
 	aliases {
+		leds0 = &leds0;
 		uart0 = &uart0;
 	};
 
@@ -50,6 +51,19 @@
 		compatible = "simple-bus";
 		ranges;
 
+		periph_cntl: syscon@10000000 {
+			compatible = "syscon";
+			reg = <0x10000000 0x14>;
+			native-endian;
+		};
+
+		reboot: syscon-reboot@10000008 {
+			compatible = "syscon-reboot";
+			regmap = <&periph_cntl>;
+			offset = <0x8>;
+			mask = <0x1>;
+		};
+
 		periph_intc: periph_intc@10000020 {
 			compatible = "brcm,bcm3380-l2-intc";
 			reg = <0x10000024 0x4 0x1000002c 0x4>,
@@ -62,6 +76,14 @@
 			interrupts = <2>;
 		};
 
+		leds0: led-controller@100000d0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6358-leds";
+			reg = <0x100000d0 0x8>;
+			status = "disabled";
+		};
+
 		uart0: serial@10000100 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x10000100 0x18>;
diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi
index 1a7efa883c5e..3ae16053a0c9 100644
--- a/arch/mips/boot/dts/brcm/bcm7125.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi
@@ -98,7 +98,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7125-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x60c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index d817bb46b934..be7991917d29 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -87,20 +87,38 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406780 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0xf000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <59>;
+			interrupts = <59>, <57>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <60>, <58>, <62>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
@@ -144,6 +162,56 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@406380 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406380 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
+		bsce: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bsce";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -246,5 +314,47 @@
 			interrupts = <76>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,broken-ncq;
+			brcm,broken-phy;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@1800000 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi
index 277a90adc1a7..060805be619a 100644
--- a/arch/mips/boot/dts/brcm/bcm7358.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi
@@ -81,20 +81,38 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <56>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7358-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
@@ -138,6 +156,46 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi
index 9e1e571ba346..bcdb09bfe07b 100644
--- a/arch/mips/boot/dts/brcm/bcm7360.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi
@@ -81,20 +81,38 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <56>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7360-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
@@ -138,6 +156,46 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscc: i2c@406300 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406300 0x58>;
+		      interrupts = <26>;
+		      interrupt-names = "upg_bscc";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi
index 6e65db86fc61..d3b1b762e6c3 100644
--- a/arch/mips/boot/dts/brcm/bcm7362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi
@@ -87,20 +87,38 @@
 			compatible = "brcm,bcm7120-l2-intc";
 			reg = <0x406600 0x8>;
 
-			brcm,int-map-mask = <0x44>;
+			brcm,int-map-mask = <0x44>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
 			interrupt-parent = <&periph_intc>;
-			interrupts = <56>;
+			interrupts = <56>, <54>;
+			interrupt-names = "upg_main", "upg_bsc";
+		};
+
+		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x408b80 0x8>;
+
+			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+			brcm,int-fwd-mask = <0>;
+			brcm,irq-can-wake;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&periph_intc>;
+			interrupts = <57>, <55>, <59>;
+			interrupt-names = "upg_main_aon", "upg_bsc_aon",
+					  "upg_spi";
 		};
 
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7362-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
@@ -144,6 +162,36 @@
 			status = "disabled";
 		};
 
+		bsca: i2c@406200 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406200 0x58>;
+		      interrupts = <24>;
+		      interrupt-names = "upg_bsca";
+		      status = "disabled";
+		};
+
+		bscb: i2c@406280 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_irq0_intc>;
+		      reg = <0x406280 0x58>;
+		      interrupts = <25>;
+		      interrupt-names = "upg_bscb";
+		      status = "disabled";
+		};
+
+		bscd: i2c@408980 {
+		      clock-frequency = <390000>;
+		      compatible = "brcm,brcmstb-i2c";
+		      interrupt-parent = <&upg_aon_irq0_intc>;
+		      reg = <0x408980 0x58>;
+		      interrupts = <27>;
+		      interrupt-names = "upg_bscd";
+		      status = "disabled";
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;
@@ -189,5 +237,47 @@
 			interrupts = <66>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <86>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,broken-ncq;
+			brcm,broken-phy;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@1800000 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi
index 5f55d0a50a28..3302a1b8a5c9 100644
--- a/arch/mips/boot/dts/brcm/bcm7420.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi
@@ -99,7 +99,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7420-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x60c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 5b660b617ead..15b27aae15a9 100644
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -100,7 +100,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
@@ -221,5 +221,47 @@
 			interrupts = <73>;
 			status = "disabled";
 		};
+
+		sata: sata@181000 {
+			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <40>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			brcm,broken-ncq;
+			brcm,broken-phy;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@1800000 {
+			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+			reg = <0x180100 0x0eff>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 };
diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi b/arch/mips/boot/dts/brcm/bcm7435.dtsi
index 8b9432cc062b..56035e5b7008 100644
--- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
@@ -82,7 +82,7 @@
 		};
 
 		gisb-arb@400000 {
-			compatible = "brcm,bcm7400-gisb-arb";
+			compatible = "brcm,bcm7435-gisb-arb";
 			reg = <0x400000 0xdc>;
 			native-endian;
 			interrupt-parent = <&sun_l2_intc>;
@@ -114,7 +114,7 @@
 		sun_top_ctrl: syscon@404000 {
 			compatible = "brcm,bcm7425-sun-top-ctrl", "syscon";
 			reg = <0x404000 0x51c>;
-			little-endian;
+			native-endian;
 		};
 
 		reboot {
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index 3fe0445b9d37..d3d28816a027 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -29,6 +29,26 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
+&bsce {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -64,3 +84,11 @@
 &ohci3 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
index a8dc01e30313..02ce6b429dc4 100644
--- a/arch/mips/boot/dts/brcm/bcm97358svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts
@@ -29,6 +29,22 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
index eee8b0e32681..d48462e091f1 100644
--- a/arch/mips/boot/dts/brcm/bcm97360svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts
@@ -29,6 +29,22 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscc {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
index 739c2ef5663b..3cfcaebe7f79 100644
--- a/arch/mips/boot/dts/brcm/bcm97362svmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts
@@ -29,6 +29,18 @@
 	status = "okay";
 };
 
+&bsca {
+	status = "okay";
+};
+
+&bscb {
+	status = "okay";
+};
+
+&bscd {
+	status = "okay";
+};
+
 &enet0 {
 	status = "okay";
 };
@@ -40,3 +52,11 @@
 &ohci0 {
 	status = "okay";
 };
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 9fcb9e7d1f57..1652d8d60b1e 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -42,3 +42,67 @@
 &uart4 {
 	status = "okay";
 };
+
+&nemc {
+	status = "okay";
+
+	nandc: nand-controller@1 {
+		compatible = "ingenic,jz4780-nand";
+		reg = <1 0 0x1000000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ingenic,bch-controller = <&bch>;
+
+		ingenic,nemc-tAS = <10>;
+		ingenic,nemc-tAH = <5>;
+		ingenic,nemc-tBP = <10>;
+		ingenic,nemc-tAW = <15>;
+		ingenic,nemc-tSTRV = <100>;
+
+		nand@1 {
+			reg = <1>;
+
+			nand-ecc-step-size = <1024>;
+			nand-ecc-strength = <24>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <2>;
+				#size-cells = <2>;
+
+				partition@0 {
+					label = "u-boot-spl";
+					reg = <0x0 0x0 0x0 0x800000>;
+				};
+
+				partition@0x800000 {
+					label = "u-boot";
+					reg = <0x0 0x800000 0x0 0x200000>;
+				};
+
+				partition@0xa00000 {
+					label = "u-boot-env";
+					reg = <0x0 0xa00000 0x0 0x200000>;
+				};
+
+				partition@0xc00000 {
+					label = "boot";
+					reg = <0x0 0xc00000 0x0 0x4000000>;
+				};
+
+				partition@0x8c00000 {
+					label = "system";
+					reg = <0x0 0x4c00000 0x1 0xfb400000>;
+				};
+			};
+		};
+	};
+};
+
+&bch {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi
index 65389f602733..b868b429add2 100644
--- a/arch/mips/boot/dts/ingenic/jz4780.dtsi
+++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi
@@ -108,4 +108,30 @@
 
 		status = "disabled";
 	};
+
+	nemc: nemc@13410000 {
+		compatible = "ingenic,jz4780-nemc";
+		reg = <0x13410000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <1 0 0x1b000000 0x1000000
+			  2 0 0x1a000000 0x1000000
+			  3 0 0x19000000 0x1000000
+			  4 0 0x18000000 0x1000000
+			  5 0 0x17000000 0x1000000
+			  6 0 0x16000000 0x1000000>;
+
+		clocks = <&cgu JZ4780_CLK_NEMC>;
+
+		status = "disabled";
+	};
+
+	bch: bch@134d0000 {
+		compatible = "ingenic,jz4780-bch";
+		reg = <0x134d0000 0x10000>;
+
+		clocks = <&cgu JZ4780_CLK_BCH>;
+
+		status = "disabled";
+	};
 };
diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts
index c678115f5b7f..b18c46637d21 100644
--- a/arch/mips/boot/dts/mti/malta.dts
+++ b/arch/mips/boot/dts/mti/malta.dts
@@ -1,5 +1,9 @@
 /dts-v1/;
 
+/memreserve/ 0x00000000 0x00001000;	/* YAMON exception vectors */
+/memreserve/ 0x00001000 0x000ef000;	/* YAMON */
+/memreserve/ 0x000f0000 0x00010000;	/* PIIX4 ISA memory */
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/mips/boot/dts/pic32/Makefile b/arch/mips/boot/dts/pic32/Makefile
new file mode 100644
index 000000000000..7ac790551ec9
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/Makefile
@@ -0,0 +1,12 @@
+dtb-$(CONFIG_DTB_PIC32_MZDA_SK)		+= pic32mzda_sk.dtb
+
+dtb-$(CONFIG_DTB_PIC32_NONE)		+= \
+					pic32mzda_sk.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
new file mode 100644
index 000000000000..ef1335012f43
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi
@@ -0,0 +1,236 @@
+/*
+ * Device Tree Source for PIC32MZDA clock data
+ *
+ * Purna Chandra Mandal <purna.mandal@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/* all fixed rate clocks */
+
+/ {
+	POSC:posc_clk { /* On-chip primary oscillator */
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	FRC:frc_clk { /* internal FRC oscillator */
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <8000000>;
+	};
+
+	BFRC:bfrc_clk { /* internal backup FRC oscillator */
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <8000000>;
+	};
+
+	LPRC:lprc_clk { /* internal low-power FRC oscillator */
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+	};
+
+	/* UPLL provides clock to USBCORE */
+	UPLL:usb_phy_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "usbphy_clk";
+	};
+
+	TxCKI:txcki_clk { /* external clock input on TxCLKI pin */
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <4000000>;
+		status = "disabled";
+	};
+
+	/* external clock input on REFCLKIx pin */
+	REFIx:refix_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		status = "disabled";
+	};
+
+	/* PIC32 specific clks */
+	pic32_clktree {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1f801200 0x200>;
+		compatible = "microchip,pic32mzda-clk";
+		ranges = <0 0x1f801200 0x200>;
+
+		/* secondary oscillator; external input on SOSCI pin */
+		SOSC:sosc_clk@0 {
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-sosc";
+			clock-frequency = <32768>;
+			reg = <0x000 0x10>,   /* enable reg */
+			      <0x1d0 0x10>; /* status reg */
+			microchip,bit-mask = <0x02>; /* enable mask */
+			microchip,status-bit-mask = <0x10>; /* status-mask*/
+		};
+
+		FRCDIV:frcdiv_clk {
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-frcdivclk";
+			clocks = <&FRC>;
+			clock-output-names = "frcdiv_clk";
+		};
+
+		/* System PLL clock */
+		SYSPLL:spll_clk@020 {
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-syspll";
+			reg = <0x020 0x10>, /* SPLL register */
+			      <0x1d0 0x10>; /* CLKSTAT register */
+			clocks = <&POSC>, <&FRC>;
+			clock-output-names = "sys_pll";
+			microchip,status-bit-mask = <0x80>; /* SPLLRDY */
+		};
+
+		/* system clock; mux with postdiv & slew */
+		SYSCLK:sys_clk@1c0 {
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-sysclk-v2";
+			reg = <0x1c0 0x04>; /* SLEWCON */
+			clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>,
+				 <&LPRC>, <&FRCDIV>;
+			microchip,clock-indices = <0>, <1>, <2>, <4>,
+						  <5>, <7>;
+			clock-output-names = "sys_clk";
+		};
+
+		/* Peripheral bus1 clock */
+		PBCLK1:pb1_clk@140 {
+			reg = <0x140 0x10>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-pbclk";
+			clocks = <&SYSCLK>;
+			clock-output-names = "pb1_clk";
+			/* used by system modules, not gateable */
+			microchip,ignore-unused;
+		};
+
+		/* Peripheral bus2 clock */
+		PBCLK2:pb2_clk@150 {
+			reg = <0x150 0x10>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-pbclk";
+			clocks = <&SYSCLK>;
+			clock-output-names = "pb2_clk";
+			/* avoid gating even if unused */
+			microchip,ignore-unused;
+		};
+
+		/* Peripheral bus3 clock */
+		PBCLK3:pb3_clk@160 {
+			reg = <0x160 0x10>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-pbclk";
+			clocks = <&SYSCLK>;
+			clock-output-names = "pb3_clk";
+		};
+
+		/* Peripheral bus4 clock(I/O ports, GPIO) */
+		PBCLK4:pb4_clk@170 {
+			reg = <0x170 0x10>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-pbclk";
+			clocks = <&SYSCLK>;
+			clock-output-names = "pb4_clk";
+		};
+
+		/* Peripheral bus clock */
+		PBCLK5:pb5_clk@180 {
+			reg = <0x180 0x10>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-pbclk";
+			clocks = <&SYSCLK>;
+			clock-output-names = "pb5_clk";
+		};
+
+		/* Peripheral Bus6 clock; */
+		PBCLK6:pb6_clk@190 {
+			reg = <0x190 0x10>;
+			compatible = "microchip,pic32mzda-pbclk";
+			clocks = <&SYSCLK>;
+			#clock-cells = <0>;
+		};
+
+		/* Peripheral bus7 clock */
+		PBCLK7:pb7_clk@1a0 {
+			reg = <0x1a0 0x10>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-pbclk";
+			/* CPU is driven by this clock; so named */
+			clock-output-names = "cpu_clk";
+			clocks = <&SYSCLK>;
+		};
+
+		/* Reference Oscillator clock for SPI/I2S */
+		REFCLKO1:refo1_clk@80 {
+			reg = <0x080 0x20>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-refoclk";
+			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+						  <5>, <7>, <8>, <9>;
+			clock-output-names = "refo1_clk";
+		};
+
+		/* Reference Oscillator clock for SQI */
+		REFCLKO2:refo2_clk@a0 {
+			reg = <0x0a0 0x20>;
+			#clock-cells = <0>;
+			compatible = "microchip,pic32mzda-refoclk";
+			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+						  <5>, <7>, <8>, <9>;
+			clock-output-names = "refo2_clk";
+		};
+
+		/* Reference Oscillator clock, ADC */
+		REFCLKO3:refo3_clk@c0 {
+			reg = <0x0c0 0x20>;
+			compatible = "microchip,pic32mzda-refoclk";
+			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+						  <5>, <7>, <8>, <9>;
+			#clock-cells = <0>;
+			clock-output-names = "refo3_clk";
+		};
+
+		/* Reference Oscillator clock */
+		REFCLKO4:refo4_clk@e0 {
+			reg = <0x0e0 0x20>;
+			compatible = "microchip,pic32mzda-refoclk";
+			clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>,
+				 <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>;
+			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+						  <5>, <7>, <8>, <9>;
+			#clock-cells = <0>;
+			clock-output-names = "refo4_clk";
+		};
+
+		/* Reference Oscillator clock, LCD */
+		REFCLKO5:refo5_clk@100 {
+			reg = <0x100 0x20>;
+			compatible = "microchip,pic32mzda-refoclk";
+			clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>,
+				 <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>;
+			microchip,clock-indices = <0>, <1>, <2>, <3>, <4>,
+						  <5>, <7>, <8>, <9>;
+			#clock-cells = <0>;
+			clock-output-names = "refo5_clk";
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda.dtsi b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
new file mode 100644
index 000000000000..ad9e3318c2ce
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda.dtsi
@@ -0,0 +1,281 @@
+/*
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "pic32mzda-clk.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&evic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+		gpio8 = &gpio8;
+		gpio9 = &gpio9;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mti,mips14KEc";
+			device_type = "cpu";
+		};
+	};
+
+	soc {
+		compatible = "microchip,pic32mzda-infra";
+		interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	evic: interrupt-controller@1f810000 {
+		compatible = "microchip,pic32mzda-evic";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <0x1f810000 0x1000>;
+		microchip,external-irqs = <3 8 13 18 23>;
+	};
+
+	pic32_pinctrl: pinctrl@1f801400{
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "microchip,pic32mzda-pinctrl";
+		reg = <0x1f801400 0x400>;
+		clocks = <&PBCLK1>;
+	};
+
+	/* PORTA */
+	gpio0: gpio0@1f860000 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860000 0x100>;
+		interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <0>;
+		gpio-ranges = <&pic32_pinctrl 0 0 16>;
+	};
+
+	/* PORTB */
+	gpio1: gpio1@1f860100 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860100 0x100>;
+		interrupts = <119 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <1>;
+		gpio-ranges = <&pic32_pinctrl 0 16 16>;
+	};
+
+	/* PORTC */
+	gpio2: gpio2@1f860200 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860200 0x100>;
+		interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <2>;
+		gpio-ranges = <&pic32_pinctrl 0 32 16>;
+	};
+
+	/* PORTD */
+	gpio3: gpio3@1f860300 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860300 0x100>;
+		interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <3>;
+		gpio-ranges = <&pic32_pinctrl 0 48 16>;
+	};
+
+	/* PORTE */
+	gpio4: gpio4@1f860400 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860400 0x100>;
+		interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <4>;
+		gpio-ranges = <&pic32_pinctrl 0 64 16>;
+	};
+
+	/* PORTF */
+	gpio5: gpio5@1f860500 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860500 0x100>;
+		interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <5>;
+		gpio-ranges = <&pic32_pinctrl 0 80 16>;
+	};
+
+	/* PORTG */
+	gpio6: gpio6@1f860600 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860600 0x100>;
+		interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <6>;
+		gpio-ranges = <&pic32_pinctrl 0 96 16>;
+	};
+
+	/* PORTH */
+	gpio7: gpio7@1f860700 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860700 0x100>;
+		interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <7>;
+		gpio-ranges = <&pic32_pinctrl 0 112 16>;
+	};
+
+	/* PORTI does not exist */
+
+	/* PORTJ */
+	gpio8: gpio8@1f860800 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860800 0x100>;
+		interrupts = <126 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <8>;
+		gpio-ranges = <&pic32_pinctrl 0 128 16>;
+	};
+
+	/* PORTK */
+	gpio9: gpio9@1f860900 {
+		compatible = "microchip,pic32mzda-gpio";
+		reg = <0x1f860900 0x100>;
+		interrupts = <127 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		clocks = <&PBCLK4>;
+		microchip,gpio-bank = <9>;
+		gpio-ranges = <&pic32_pinctrl 0 144 16>;
+	};
+
+	sdhci: sdhci@1f8ec000 {
+		compatible = "microchip,pic32mzda-sdhci";
+		reg = <0x1f8ec000 0x100>;
+		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&REFCLKO4>, <&PBCLK5>;
+		clock-names = "base_clk", "sys_clk";
+		bus-width = <4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	uart1: serial@1f822000 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822000 0x50>;
+		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+			<113 IRQ_TYPE_LEVEL_HIGH>,
+			<114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		status = "disabled";
+	};
+
+	uart2: serial@1f822200 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822200 0x50>;
+		interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
+			<146 IRQ_TYPE_LEVEL_HIGH>,
+			<147 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		status = "disabled";
+	};
+
+	uart3: serial@1f822400 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822400 0x50>;
+		interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
+			<158 IRQ_TYPE_LEVEL_HIGH>,
+			<159 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		status = "disabled";
+	};
+
+	uart4: serial@1f822600 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822600 0x50>;
+		interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
+			<171 IRQ_TYPE_LEVEL_HIGH>,
+			<172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		status = "disabled";
+	};
+
+	uart5: serial@1f822800 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822800 0x50>;
+		interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
+			<180 IRQ_TYPE_LEVEL_HIGH>,
+			<181 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		status = "disabled";
+	};
+
+	uart6: serial@1f822A00 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822A00 0x50>;
+		interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
+			<189 IRQ_TYPE_LEVEL_HIGH>,
+			<190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/pic32/pic32mzda_sk.dts b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
new file mode 100644
index 000000000000..5d434a50e85b
--- /dev/null
+++ b/arch/mips/boot/dts/pic32/pic32mzda_sk.dts
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "pic32mzda.dtsi"
+
+/ {
+	compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda";
+	model = "Microchip PIC32MZDA Starter Kit";
+
+	memory {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	chosen {
+		bootargs = "earlyprintk=ttyPIC1,115200n8r console=ttyPIC1,115200n8";
+	};
+
+	leds0 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		led@1 {
+			label = "pic32mzda_sk:red:led1";
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led@2 {
+			label = "pic32mzda_sk:yellow:led2";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led@3 {
+			label = "pic32mzda_sk:green:led3";
+			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	keys0 {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&user_buttons_s0>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@sw1 {
+			label = "ESC";
+			linux,code = <1>;
+			gpios = <&gpio1 12 0>;
+		};
+
+		button@sw2 {
+			label = "Home";
+			linux,code = <102>;
+			gpios = <&gpio1 13 0>;
+		};
+
+		button@sw3 {
+			label = "Menu";
+			linux,code = <139>;
+			gpios = <&gpio1 14 0>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	status = "okay";
+	assigned-clocks = <&REFCLKO2>,<&REFCLKO4>,<&REFCLKO5>;
+	assigned-clock-rates = <50000000>,<25000000>,<40000000>;
+};
+
+&pic32_pinctrl {
+
+	pinctrl_sdhc1: sdhc1_pins0 {
+		pins = "A6", "D4", "G13", "G12", "G14", "A7", "A0";
+		microchip,digital;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pins = "H0", "H1", "H2";
+		output-low;
+		microchip,digital;
+	};
+
+	user_buttons_s0: user_buttons_s0 {
+		pins = "B12", "B13", "B14";
+		microchip,digital;
+		input-enable;
+		bias-pull-up;
+	};
+
+	pinctrl_uart2: pinctrl_uart2 {
+		uart2-tx {
+			pins = "G9";
+			function = "U2TX";
+			microchip,digital;
+			output-high;
+		};
+		uart2-rx {
+			pins = "B0";
+			function = "U2RX";
+			microchip,digital;
+			input-enable;
+		};
+	};
+
+	pinctrl_uart4: uart4-0 {
+		uart4-tx {
+			pins = "C3";
+			function = "U4TX";
+			microchip,digital;
+			output-high;
+		};
+		uart4-rx {
+			pins = "E8";
+			function = "U4RX";
+			microchip,digital;
+			input-enable;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
index fb7734eadbf0..3c2ed9ee5b2f 100644
--- a/arch/mips/boot/dts/qca/ar9132.dtsi
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -83,7 +83,7 @@
 			};
 
 			pll: pll-controller@18050000 {
-				compatible = "qca,ar9132-ppl",
+				compatible = "qca,ar9132-pll",
 						"qca,ar9130-pll";
 				reg = <0x18050000 0x20>;
 
@@ -107,7 +107,7 @@
 			miscintc: interrupt-controller@18060010 {
 				compatible = "qca,ar9132-misc-intc",
 					   "qca,ar7100-misc-intc";
-				reg = <0x18060010 0x4>;
+				reg = <0x18060010 0x8>;
 
 				interrupt-parent = <&cpuintc>;
 				interrupts = <6>;
@@ -125,6 +125,21 @@
 			};
 		};
 
+		usb@1b000100 {
+			compatible = "qca,ar7100-ehci", "generic-ehci";
+			reg = <0x1b000100 0x100>;
+
+			interrupts = <3>;
+			resets = <&rst 5>;
+
+			has-transaction-translator;
+
+			phy-names = "usb";
+			phys = <&usb_phy>;
+
+			status = "disabled";
+		};
+
 		spi@1f000000 {
 			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
 			reg = <0x1f000000 0x10>;
@@ -138,4 +153,15 @@
 			#size-cells = <0>;
 		};
 	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "usb-phy", "usb-suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
 };
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
index 003015ab34e7..4f1540e5f963 100644
--- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -18,7 +18,7 @@
 		reg = <0x0 0x2000000>;
 	};
 
-	extosc: oscillator {
+	extosc: ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <40000000>;
@@ -35,6 +35,10 @@
 			};
 		};
 
+		usb@1b000100 {
+			status = "okay";
+		};
+
 		spi@1f000000 {
 			status = "okay";
 			num-cs = <1>;
@@ -65,6 +69,10 @@
 		};
 	};
 
+	usb-phy {
+		status = "okay";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
diff --git a/arch/mips/boot/dts/xilfpga/Makefile b/arch/mips/boot/dts/xilfpga/Makefile
new file mode 100644
index 000000000000..913a752a9ff1
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/Makefile
@@ -0,0 +1,9 @@
+dtb-$(CONFIG_XILFPGA_NEXYS4DDR)	+= nexys4ddr.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files	:= *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/xilfpga/microAptiv.dtsi b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
new file mode 100644
index 000000000000..81d518e75785
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/microAptiv.dtsi
@@ -0,0 +1,21 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "img,xilfpga";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,m14Kc";
+			clocks	= <&ext>;
+			reg = <0>;
+		};
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/xilfpga/nexys4ddr.dts b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
new file mode 100644
index 000000000000..686ebd11386d
--- /dev/null
+++ b/arch/mips/boot/dts/xilfpga/nexys4ddr.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+#include "microAptiv.dtsi"
+
+/ {
+	compatible = "digilent,nexys4ddr";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	cpuintc: interrupt-controller@0 {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	axi_gpio: gpio@10600000 {
+		#gpio-cells = <1>;
+		compatible = "xlnx,xps-gpio-1.00.a";
+		gpio-controller;
+		reg = <0x10600000 0x10000>;
+		xlnx,all-inputs = <0x0>;
+		xlnx,dout-default = <0x0>;
+		xlnx,gpio-width = <0x16>;
+		xlnx,interrupt-present = <0x0>;
+		xlnx,is-dual = <0x0>;
+		xlnx,tri-default = <0xffffffff>;
+	} ;
+
+	axi_uart16550: serial@10400000 {
+		compatible = "ns16550a";
+		reg = <0x10400000 0x10000>;
+
+		reg-shift = <2>;
+		reg-offset = <0x1000>;
+
+		clocks	= <&ext>;
+	};
+};
+
+&ext {
+	clock-frequency = <50000000>;
+};
diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c
index e59d1b79f24c..2f415d9d0f3c 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c
@@ -68,7 +68,7 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block)
 		gmx_rx_int_en.s.pause_drp = 1;
 		/* Skipping gmx_rx_int_en.s.reserved_16_18 */
 		/*gmx_rx_int_en.s.ifgerr = 1; */
-		/*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+		/*gmx_rx_int_en.s.coldet = 1; // Collision detect */
 		/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
 		/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
 		/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
@@ -89,7 +89,7 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block)
 		/*gmx_rx_int_en.s.phy_spd = 1; */
 		/*gmx_rx_int_en.s.phy_link = 1; */
 		/*gmx_rx_int_en.s.ifgerr = 1; */
-		/*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+		/*gmx_rx_int_en.s.coldet = 1; // Collision detect */
 		/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
 		/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
 		/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
@@ -112,7 +112,7 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block)
 		/*gmx_rx_int_en.s.phy_spd = 1; */
 		/*gmx_rx_int_en.s.phy_link = 1; */
 		/*gmx_rx_int_en.s.ifgerr = 1; */
-		/*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+		/*gmx_rx_int_en.s.coldet = 1; // Collision detect */
 		/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
 		/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
 		/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
@@ -134,7 +134,7 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block)
 		/*gmx_rx_int_en.s.phy_spd = 1; */
 		/*gmx_rx_int_en.s.phy_link = 1; */
 		/*gmx_rx_int_en.s.ifgerr = 1; */
-		/*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+		/*gmx_rx_int_en.s.coldet = 1; // Collision detect */
 		/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
 		/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
 		/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
@@ -156,7 +156,7 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block)
 		/*gmx_rx_int_en.s.phy_spd = 1; */
 		/*gmx_rx_int_en.s.phy_link = 1; */
 		/*gmx_rx_int_en.s.ifgerr = 1; */
-		/*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+		/*gmx_rx_int_en.s.coldet = 1; // Collision detect */
 		/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
 		/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
 		/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
@@ -179,7 +179,7 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block)
 		/*gmx_rx_int_en.s.phy_spd = 1; */
 		/*gmx_rx_int_en.s.phy_link = 1; */
 		/*gmx_rx_int_en.s.ifgerr = 1; */
-		/*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+		/*gmx_rx_int_en.s.coldet = 1; // Collision detect */
 		/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
 		/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
 		/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
@@ -209,7 +209,7 @@ void __cvmx_interrupt_gmxx_rxx_int_en_enable(int index, int block)
 		gmx_rx_int_en.s.pause_drp = 1;
 		/* Skipping gmx_rx_int_en.s.reserved_16_18 */
 		/*gmx_rx_int_en.s.ifgerr = 1; */
-		/*gmx_rx_int_en.s.coldet = 1; // Collsion detect */
+		/*gmx_rx_int_en.s.coldet = 1; // Collision detect */
 		/*gmx_rx_int_en.s.falerr = 1; // False carrier error or extend error after slottime */
 		/*gmx_rx_int_en.s.rsverr = 1; // RGMII reserved opcodes */
 		/*gmx_rx_int_en.s.pcterr = 1; // Bad Preamble / Protocol */
diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c
index 87be167a7a6a..676fab50dd2b 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-pko.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c
@@ -189,7 +189,7 @@ void cvmx_pko_initialize_global(void)
 	/*
 	 * Set the size of the PKO command buffers to an odd number of
 	 * 64bit words. This allows the normal two word send to stay
-	 * aligned and never span a comamnd word buffer.
+	 * aligned and never span a command word buffer.
 	 */
 	config.u64 = 0;
 	config.s.pool = CVMX_FPA_OUTPUT_BUFFER_POOL;
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
index bd634259eab9..cd7101fb6227 100644
--- a/arch/mips/cavium-octeon/setup.c
+++ b/arch/mips/cavium-octeon/setup.c
@@ -1081,6 +1081,7 @@ void __init prom_free_prom_memory(void)
 
 int octeon_prune_device_tree(void);
 
+extern const char __appended_dtb;
 extern const char __dtb_octeon_3xxx_begin;
 extern const char __dtb_octeon_68xx_begin;
 void __init device_tree_init(void)
@@ -1088,11 +1089,19 @@ void __init device_tree_init(void)
 	const void *fdt;
 	bool do_prune;
 
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+	if (!fdt_check_header(&__appended_dtb)) {
+		fdt = &__appended_dtb;
+		do_prune = false;
+		pr_info("Using appended Device Tree.\n");
+	} else
+#endif
 	if (octeon_bootinfo->minor_version >= 3 && octeon_bootinfo->fdt_addr) {
 		fdt = phys_to_virt(octeon_bootinfo->fdt_addr);
 		if (fdt_check_header(fdt))
 			panic("Corrupt Device Tree passed to kernel.");
 		do_prune = false;
+		pr_info("Using passed Device Tree.\n");
 	} else if (OCTEON_IS_MODEL(OCTEON_CN68XX)) {
 		fdt = &__dtb_octeon_68xx_begin;
 		do_prune = true;
@@ -1106,8 +1115,6 @@ void __init device_tree_init(void)
 	if (do_prune) {
 		octeon_prune_device_tree();
 		pr_info("Using internal Device Tree.\n");
-	} else {
-		pr_info("Using passed Device Tree.\n");
 	}
 	unflatten_and_copy_device_tree();
 }
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
index b7fa9ae28c36..42412ba0f3bf 100644
--- a/arch/mips/cavium-octeon/smp.c
+++ b/arch/mips/cavium-octeon/smp.c
@@ -331,7 +331,7 @@ static int octeon_update_boot_vector(unsigned int cpu)
 	}
 
 	if (!(avail_coremask & (1 << coreid))) {
-		/* core not available, assume, that catched by simple-executive */
+		/* core not available, assume, that caught by simple-executive */
 		cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
 		cvmx_write_csr(CVMX_CIU_PP_RST, 0);
 	}
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 1cdff6b6327d..e070dac071c8 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -122,20 +122,20 @@ CONFIG_EEPROM_MAX6875=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_CHR_DEV_SCH=m
 CONFIG_ATA=y
 CONFIG_SATA_SIL24=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_IT8213=m
 CONFIG_PATA_SIL680=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -247,7 +247,6 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_NETWORK_XFRM=y
diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig
index f5585c8f35ad..24dcb90b0f64 100644
--- a/arch/mips/configs/bmips_be_defconfig
+++ b/arch/mips/configs/bmips_be_defconfig
@@ -8,7 +8,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y
 # CONFIG_SWAP is not set
 CONFIG_NO_HZ=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_GZIP is not set
+CONFIG_RD_GZIP=y
 CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -33,6 +33,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_BRCMSTB_GISB_ARB=y
 CONFIG_MTD=y
 CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig
index 400a47ec1ef1..4eb5d6e9cf8f 100644
--- a/arch/mips/configs/bmips_stb_defconfig
+++ b/arch/mips/configs/bmips_stb_defconfig
@@ -9,7 +9,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y
 # CONFIG_SWAP is not set
 CONFIG_NO_HZ=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_GZIP is not set
+CONFIG_RD_GZIP=y
 CONFIG_EXPERT=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -34,6 +34,7 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_BRCMSTB_GISB_ARB=y
 CONFIG_MTD=y
 CONFIG_MTD_CFI=y
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 5135dc0b950a..2924ba34a01b 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -31,9 +31,9 @@ CONFIG_NETWORK_SECMARK=y
 CONFIG_IP_SCTP=m
 CONFIG_FW_LOADER=m
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_PHYLIB=m
 CONFIG_MARVELL_PHY=m
diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
index 4e36b6e1869c..43e0ba24470c 100644
--- a/arch/mips/configs/ci20_defconfig
+++ b/arch/mips/configs/ci20_defconfig
@@ -17,13 +17,12 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_MEMCG=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_SCHED=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -52,6 +51,11 @@ CONFIG_DEVTMPFS=y
 # CONFIG_ALLOW_DEV_COREDUMP is not set
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_JZ4780=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
@@ -103,7 +107,7 @@ CONFIG_PROC_KCORE=y
 # CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_UBIFS_FS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=y
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 0126e66d60cb..e94d266c4b97 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -14,9 +14,9 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index a75c65da08b4..87435897fd50 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -34,7 +34,7 @@ CONFIG_MIPS32_N32=y
 CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="/dev/hda3"
+CONFIG_PM_STD_PARTITION="/dev/sda3"
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -114,20 +114,16 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_TASK_IOCTL=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_VIA82CXXX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_VIA=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_MACVLAN=m
 CONFIG_VETH=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 57ed466e00db..6ba9ce9fcdd5 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -358,7 +358,6 @@ CONFIG_DLM=m
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 48e16d98b2cc..77e9f505f5e4 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -346,7 +346,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_DLM=m
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITYFS=y
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_NULL=m
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index fe48220157a9..f9af98f63cff 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -181,7 +181,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_ECB=y
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 4f37a5985459..a5e85e1ee5de 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -362,7 +362,6 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index 0179c7fa014f..e620a2c3eba4 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -35,11 +35,11 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_CMD64X=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 CONFIG_NET_PCI=y
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 54cc3853d259..d1f198b072a0 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -108,16 +108,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_TASK_IOCTL=y
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_AMD=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -417,7 +412,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 61a4460d67d3..5afb4840aec7 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -241,14 +241,11 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
 CONFIG_RAID_ATTRS=m
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
@@ -265,6 +262,7 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
 CONFIG_ATA=y
 CONFIG_ATA_PIIX=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index d41742dd26c8..98f13879bb8f 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -248,17 +248,12 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
@@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig
index a7806e83ea0f..3b5d5913f548 100644
--- a/arch/mips/configs/malta_kvm_guest_defconfig
+++ b/arch/mips/configs/malta_kvm_guest_defconfig
@@ -248,17 +248,12 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_VIRTIO_BLK=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_MULTI_LUN=y
@@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig
index 4bce1f8ebe98..7f50dd67aa8d 100644
--- a/arch/mips/configs/malta_qemu_32r6_defconfig
+++ b/arch/mips/configs/malta_qemu_32r6_defconfig
@@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig
index fb042ce86b4b..a9d433a17fcf 100644
--- a/arch/mips/configs/maltaaprp_defconfig
+++ b/arch/mips/configs/maltaaprp_defconfig
@@ -81,15 +81,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig
index c83338a39917..2774ef064505 100644
--- a/arch/mips/configs/maltasmvp_eva_defconfig
+++ b/arch/mips/configs/maltasmvp_eva_defconfig
@@ -85,15 +85,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig
index 62344648eb7a..9bbd2218f0bf 100644
--- a/arch/mips/configs/maltaup_defconfig
+++ b/arch/mips/configs/maltaup_defconfig
@@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index c388bff09148..732215732751 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -244,17 +244,12 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
@@ -269,6 +264,13 @@ CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_PATA_IT8213=m
+CONFIG_PATA_OLDPIIX=y
+CONFIG_PATA_MPIIX=y
+CONFIG_ATA_GENERIC=y
+CONFIG_PATA_LEGACY=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 7a346605c498..a2c045fab6c5 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -27,9 +27,9 @@ CONFIG_INET_XFRM_MODE_BEET=m
 CONFIG_NETWORK_SECMARK=y
 CONFIG_CONNECTOR=m
 CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-CONFIG_IDE=y
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
 CONFIG_NETDEVICES=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig
new file mode 100644
index 000000000000..52192c632ae8
--- /dev/null
+++ b/arch/mips/configs/pic32mzda_defconfig
@@ -0,0 +1,89 @@
+CONFIG_MACH_PIC32=y
+CONFIG_DTB_PIC32_MZDA_SK=y
+CONFIG_HZ_100=y
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_SECCOMP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_RELAY=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SGI_PARTITION=y
+CONFIG_BINFMT_MISC=m
+# CONFIG_SUSPEND is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_INPUT_LEDS=m
+CONFIG_INPUT_POLLDEV=y
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_GPIO_POLLED=m
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_PIC32=y
+CONFIG_SERIAL_PIC32_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=m
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_MICROCHIP_PIC32=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_ONESHOT=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_FSCACHE=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZ4=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index db029f4ff759..82db4e3e4cf1 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -453,7 +453,6 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_LRW=m
diff --git a/arch/mips/configs/sb1250_swarm_defconfig b/arch/mips/configs/sb1250_swarm_defconfig
index 51bab13ef6f8..7fca09fedb59 100644
--- a/arch/mips/configs/sb1250_swarm_defconfig
+++ b/arch/mips/configs/sb1250_swarm_defconfig
@@ -87,7 +87,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_DLM=m
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
diff --git a/arch/mips/configs/xilfpga_defconfig b/arch/mips/configs/xilfpga_defconfig
new file mode 100644
index 000000000000..ed1dce348320
--- /dev/null
+++ b/arch/mips/configs/xilfpga_defconfig
@@ -0,0 +1,40 @@
+CONFIG_MACH_XILFPGA=y
+# CONFIG_COMPACTION is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_BLOCK is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_UEVENT_HELPER is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_XILINX=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 8c6f508e59de..d7b99180c6e1 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -5,7 +5,7 @@
  * Written by Ralf Baechle and Andreas Busse, modified for DECstation
  * support by Paul Antoine and Harald Koerfgen.
  *
- * completly rewritten:
+ * completely rewritten:
  * Copyright (C) 1998 Harald Koerfgen
  *
  * Rewritten extensively for controller-driven IRQ support
diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c
index 5537b94572b2..0d75b5a0bad4 100644
--- a/arch/mips/fw/arc/memory.c
+++ b/arch/mips/fw/arc/memory.c
@@ -9,7 +9,7 @@
  * PROM library functions for acquiring/using memory descriptors given to us
  * from the ARCS firmware.  This is only used when CONFIG_ARC_MEMORY is set
  * because on some machines like SGI IP27 the ARC memory configuration data
- * completly bogus and alternate easier to use mechanisms are available.
+ * completely bogus and alternate easier to use mechanisms are available.
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/mips/include/asm/abi.h b/arch/mips/include/asm/abi.h
index 37f84078e78a..940760844e2f 100644
--- a/arch/mips/include/asm/abi.h
+++ b/arch/mips/include/asm/abi.h
@@ -11,19 +11,20 @@
 
 #include <asm/signal.h>
 #include <asm/siginfo.h>
+#include <asm/vdso.h>
 
 struct mips_abi {
 	int (* const setup_frame)(void *sig_return, struct ksignal *ksig,
 				  struct pt_regs *regs, sigset_t *set);
-	const unsigned long	signal_return_offset;
 	int (* const setup_rt_frame)(void *sig_return, struct ksignal *ksig,
 				     struct pt_regs *regs, sigset_t *set);
-	const unsigned long	rt_signal_return_offset;
 	const unsigned long	restart;
 
 	unsigned	off_sc_fpregs;
 	unsigned	off_sc_fpc_csr;
 	unsigned	off_sc_used_math;
+
+	struct mips_vdso_image *vdso;
 };
 
 #endif /* _ASM_ABI_H */
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index f82d3af07931..835b402e4574 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -507,7 +507,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
  * @u: ...unless v is equal to u.
  *
  * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
+ * Returns true iff @v was not @u.
  */
 static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 {
diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h
index 752e0b86c171..d296633d890e 100644
--- a/arch/mips/include/asm/barrier.h
+++ b/arch/mips/include/asm/barrier.h
@@ -10,9 +10,6 @@
 
 #include <asm/addrspace.h>
 
-#define read_barrier_depends()		do { } while(0)
-#define smp_read_barrier_depends()	do { } while(0)
-
 #ifdef CONFIG_CPU_HAS_SYNC
 #define __sync()				\
 	__asm__ __volatile__(			\
@@ -87,23 +84,21 @@
 
 #define wmb()		fast_wmb()
 #define rmb()		fast_rmb()
-#define dma_wmb()	fast_wmb()
-#define dma_rmb()	fast_rmb()
 
-#if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
+#if defined(CONFIG_WEAK_ORDERING)
 # ifdef CONFIG_CPU_CAVIUM_OCTEON
-#  define smp_mb()	__sync()
-#  define smp_rmb()	barrier()
-#  define smp_wmb()	__syncw()
+#  define __smp_mb()	__sync()
+#  define __smp_rmb()	barrier()
+#  define __smp_wmb()	__syncw()
 # else
-#  define smp_mb()	__asm__ __volatile__("sync" : : :"memory")
-#  define smp_rmb()	__asm__ __volatile__("sync" : : :"memory")
-#  define smp_wmb()	__asm__ __volatile__("sync" : : :"memory")
+#  define __smp_mb()	__asm__ __volatile__("sync" : : :"memory")
+#  define __smp_rmb()	__asm__ __volatile__("sync" : : :"memory")
+#  define __smp_wmb()	__asm__ __volatile__("sync" : : :"memory")
 # endif
 #else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
+#define __smp_mb()	barrier()
+#define __smp_rmb()	barrier()
+#define __smp_wmb()	barrier()
 #endif
 
 #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
@@ -112,13 +107,11 @@
 #define __WEAK_LLSC_MB		"		\n"
 #endif
 
-#define smp_store_mb(var, value) \
-	do { WRITE_ONCE(var, value); smp_mb(); } while (0)
-
 #define smp_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
 
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 #define smp_mb__before_llsc() smp_wmb()
+#define __smp_mb__before_llsc() __smp_wmb()
 /* Cause previous writes to become visible on all CPUs as soon as possible */
 #define nudge_writes() __asm__ __volatile__(".set push\n\t"		\
 					    ".set arch=octeon\n\t"	\
@@ -126,25 +119,13 @@
 					    ".set pop" : : : "memory")
 #else
 #define smp_mb__before_llsc() smp_llsc_mb()
+#define __smp_mb__before_llsc() smp_llsc_mb()
 #define nudge_writes() mb()
 #endif
 
-#define smp_store_release(p, v)						\
-do {									\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	WRITE_ONCE(*p, v);						\
-} while (0)
-
-#define smp_load_acquire(p)						\
-({									\
-	typeof(*p) ___p1 = READ_ONCE(*p);				\
-	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
-	___p1;								\
-})
-
-#define smp_mb__before_atomic()	smp_mb__before_llsc()
-#define smp_mb__after_atomic()	smp_llsc_mb()
+#define __smp_mb__before_atomic()	__smp_mb__before_llsc()
+#define __smp_mb__after_atomic()	smp_llsc_mb()
+
+#include <asm-generic/barrier.h>
 
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/mips/include/asm/bcache.h b/arch/mips/include/asm/bcache.h
index 8c34484cea82..a00857b135c3 100644
--- a/arch/mips/include/asm/bcache.h
+++ b/arch/mips/include/asm/bcache.h
@@ -9,6 +9,7 @@
 #ifndef _ASM_BCACHE_H
 #define _ASM_BCACHE_H
 
+#include <linux/types.h>
 
 /* Some R4000 / R4400 / R4600 / R5000 machines may have a non-dma-coherent,
    chipset implemented caches.	On machines with other CPUs the CPU does the
@@ -18,6 +19,9 @@ struct bcache_ops {
 	void (*bc_disable)(void);
 	void (*bc_wback_inv)(unsigned long page, unsigned long size);
 	void (*bc_inv)(unsigned long page, unsigned long size);
+	void (*bc_prefetch_enable)(void);
+	void (*bc_prefetch_disable)(void);
+	bool (*bc_prefetch_is_enabled)(void);
 };
 
 extern void indy_sc_init(void);
@@ -46,6 +50,26 @@ static inline void bc_inv(unsigned long page, unsigned long size)
 	bcops->bc_inv(page, size);
 }
 
+static inline void bc_prefetch_enable(void)
+{
+	if (bcops->bc_prefetch_enable)
+		bcops->bc_prefetch_enable();
+}
+
+static inline void bc_prefetch_disable(void)
+{
+	if (bcops->bc_prefetch_disable)
+		bcops->bc_prefetch_disable();
+}
+
+static inline bool bc_prefetch_is_enabled(void)
+{
+	if (bcops->bc_prefetch_is_enabled)
+		return bcops->bc_prefetch_is_enabled();
+
+	return false;
+}
+
 #else /* !defined(CONFIG_BOARD_SCACHE) */
 
 /* Not R4000 / R4400 / R4600 / R5000.  */
@@ -54,6 +78,9 @@ static inline void bc_inv(unsigned long page, unsigned long size)
 #define bc_disable() do { } while (0)
 #define bc_wback_inv(page, size) do { } while (0)
 #define bc_inv(page, size) do { } while (0)
+#define bc_prefetch_enable() do { } while (0)
+#define bc_prefetch_disable() do { } while (0)
+#define bc_prefetch_is_enabled() 0
 
 #endif /* !defined(CONFIG_BOARD_SCACHE) */
 
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 06b9bc7ea14b..c3212ff26723 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -12,54 +12,76 @@
 #define __ASM_CACHEOPS_H
 
 /*
+ * Most cache ops are split into a 2 bit field identifying the cache, and a 3
+ * bit field identifying the cache operation.
+ */
+#define CacheOp_Cache			0x03
+#define CacheOp_Op			0x1c
+
+#define Cache_I				0x00
+#define Cache_D				0x01
+#define Cache_T				0x02
+#define Cache_S				0x03
+
+#define Index_Writeback_Inv		0x00
+#define Index_Load_Tag			0x04
+#define Index_Store_Tag			0x08
+#define Hit_Invalidate			0x10
+#define Hit_Writeback_Inv		0x14	/* not with Cache_I though */
+#define Hit_Writeback			0x18
+
+/*
  * Cache Operations available on all MIPS processors with R4000-style caches
  */
-#define Index_Invalidate_I		0x00
-#define Index_Writeback_Inv_D		0x01
-#define Index_Load_Tag_I		0x04
-#define Index_Load_Tag_D		0x05
-#define Index_Store_Tag_I		0x08
-#define Index_Store_Tag_D		0x09
-#define Hit_Invalidate_I		0x10
-#define Hit_Invalidate_D		0x11
-#define Hit_Writeback_Inv_D		0x15
+#define Index_Invalidate_I		(Cache_I | Index_Writeback_Inv)
+#define Index_Writeback_Inv_D		(Cache_D | Index_Writeback_Inv)
+#define Index_Load_Tag_I		(Cache_I | Index_Load_Tag)
+#define Index_Load_Tag_D		(Cache_D | Index_Load_Tag)
+#define Index_Store_Tag_I		(Cache_I | Index_Store_Tag)
+#define Index_Store_Tag_D		(Cache_D | Index_Store_Tag)
+#define Hit_Invalidate_I		(Cache_I | Hit_Invalidate)
+#define Hit_Invalidate_D		(Cache_D | Hit_Invalidate)
+#define Hit_Writeback_Inv_D		(Cache_D | Hit_Writeback_Inv)
 
 /*
  * R4000-specific cacheops
  */
-#define Create_Dirty_Excl_D		0x0d
-#define Fill				0x14
-#define Hit_Writeback_I			0x18
-#define Hit_Writeback_D			0x19
+#define Create_Dirty_Excl_D		(Cache_D | 0x0c)
+#define Fill				(Cache_I | 0x14)
+#define Hit_Writeback_I			(Cache_I | Hit_Writeback)
+#define Hit_Writeback_D			(Cache_D | Hit_Writeback)
 
 /*
  * R4000SC and R4400SC-specific cacheops
  */
-#define Index_Invalidate_SI		0x02
-#define Index_Writeback_Inv_SD		0x03
-#define Index_Load_Tag_SI		0x06
-#define Index_Load_Tag_SD		0x07
-#define Index_Store_Tag_SI		0x0A
-#define Index_Store_Tag_SD		0x0B
-#define Create_Dirty_Excl_SD		0x0f
-#define Hit_Invalidate_SI		0x12
-#define Hit_Invalidate_SD		0x13
-#define Hit_Writeback_Inv_SD		0x17
-#define Hit_Writeback_SD		0x1b
-#define Hit_Set_Virtual_SI		0x1e
-#define Hit_Set_Virtual_SD		0x1f
+#define Cache_SI			0x02
+#define Cache_SD			0x03
+
+#define Index_Invalidate_SI		(Cache_SI | Index_Writeback_Inv)
+#define Index_Writeback_Inv_SD		(Cache_SD | Index_Writeback_Inv)
+#define Index_Load_Tag_SI		(Cache_SI | Index_Load_Tag)
+#define Index_Load_Tag_SD		(Cache_SD | Index_Load_Tag)
+#define Index_Store_Tag_SI		(Cache_SI | Index_Store_Tag)
+#define Index_Store_Tag_SD		(Cache_SD | Index_Store_Tag)
+#define Create_Dirty_Excl_SD		(Cache_SD | 0x0c)
+#define Hit_Invalidate_SI		(Cache_SI | Hit_Invalidate)
+#define Hit_Invalidate_SD		(Cache_SD | Hit_Invalidate)
+#define Hit_Writeback_Inv_SD		(Cache_SD | Hit_Writeback_Inv)
+#define Hit_Writeback_SD		(Cache_SD | Hit_Writeback)
+#define Hit_Set_Virtual_SI		(Cache_SI | 0x1c)
+#define Hit_Set_Virtual_SD		(Cache_SD | 0x1c)
 
 /*
  * R5000-specific cacheops
  */
-#define R5K_Page_Invalidate_S		0x17
+#define R5K_Page_Invalidate_S		(Cache_S | 0x14)
 
 /*
  * RM7000-specific cacheops
  */
-#define Page_Invalidate_T		0x16
-#define Index_Store_Tag_T		0x0a
-#define Index_Load_Tag_T		0x06
+#define Page_Invalidate_T		(Cache_T | 0x14)
+#define Index_Store_Tag_T		(Cache_T | Index_Store_Tag)
+#define Index_Load_Tag_T		(Cache_T | Index_Load_Tag)
 
 /*
  * R10000-specific cacheops
@@ -67,22 +89,22 @@
  * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
  * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
  */
-#define Index_Writeback_Inv_S		0x03
-#define Index_Load_Tag_S		0x07
-#define Index_Store_Tag_S		0x0B
-#define Hit_Invalidate_S		0x13
+#define Index_Writeback_Inv_S		(Cache_S | Index_Writeback_Inv)
+#define Index_Load_Tag_S		(Cache_S | Index_Load_Tag)
+#define Index_Store_Tag_S		(Cache_S | Index_Store_Tag)
+#define Hit_Invalidate_S		(Cache_S | Hit_Invalidate)
 #define Cache_Barrier			0x14
-#define Hit_Writeback_Inv_S		0x17
-#define Index_Load_Data_I		0x18
-#define Index_Load_Data_D		0x19
-#define Index_Load_Data_S		0x1b
-#define Index_Store_Data_I		0x1c
-#define Index_Store_Data_D		0x1d
-#define Index_Store_Data_S		0x1f
+#define Hit_Writeback_Inv_S		(Cache_S | Hit_Writeback_Inv)
+#define Index_Load_Data_I		(Cache_I | 0x18)
+#define Index_Load_Data_D		(Cache_D | 0x18)
+#define Index_Load_Data_S		(Cache_S | 0x18)
+#define Index_Store_Data_I		(Cache_I | 0x1c)
+#define Index_Store_Data_D		(Cache_D | 0x1c)
+#define Index_Store_Data_S		(Cache_S | 0x1c)
 
 /*
  * Loongson2-specific cacheops
  */
-#define Hit_Invalidate_I_Loongson2	0x00
+#define Hit_Invalidate_I_Loongson2	(Cache_I | 0x00)
 
 #endif	/* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/cdmm.h b/arch/mips/include/asm/cdmm.h
index bece2064cc8c..c06dbf8ba937 100644
--- a/arch/mips/include/asm/cdmm.h
+++ b/arch/mips/include/asm/cdmm.h
@@ -84,6 +84,17 @@ void mips_cdmm_driver_unregister(struct mips_cdmm_driver *);
 	module_driver(__mips_cdmm_driver, mips_cdmm_driver_register, \
 			mips_cdmm_driver_unregister)
 
+/*
+ * builtin_mips_cdmm_driver() - Helper macro for drivers that don't do anything
+ * special in init and have no exit. This eliminates some boilerplate. Each
+ * driver may only use this macro once, and calling it replaces device_initcall
+ * (or in some cases, the legacy __initcall). This is meant to be a direct
+ * parallel of module_mips_cdmm_driver() above but without the __exit stuff that
+ * is not used for builtin cases.
+ */
+#define builtin_mips_cdmm_driver(__mips_cdmm_driver) \
+	builtin_driver(__mips_cdmm_driver, mips_cdmm_driver_register)
+
 /* drivers/tty/mips_ejtag_fdc.c */
 
 #ifdef CONFIG_MIPS_EJTAG_FDC_EARLYCON
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
index 3ceacde5eb6e..bce1ce53149a 100644
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -160,9 +160,9 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 }
 #define ip_fast_csum ip_fast_csum
 
-static inline __wsum csum_tcpudp_nofold(__be32 saddr,
-	__be32 daddr, unsigned short len, unsigned short proto,
-	__wsum sum)
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	__asm__(
 	"	.set	push		# csum_tcpudp_nofold\n"
@@ -215,7 +215,7 @@ static inline __sum16 ip_compute_csum(const void *buff, int len)
 #define _HAVE_ARCH_IPV6_CSUM
 static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 					  const struct in6_addr *daddr,
-					  __u32 len, unsigned short proto,
+					  __u32 len, __u8 proto,
 					  __wsum sum)
 {
 	__wsum tmp;
diff --git a/arch/mips/include/asm/clocksource.h b/arch/mips/include/asm/clocksource.h
new file mode 100644
index 000000000000..3deb1d0c1a94
--- /dev/null
+++ b/arch/mips/include/asm/clocksource.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_CLOCKSOURCE_H
+#define __ASM_CLOCKSOURCE_H
+
+#include <linux/types.h>
+
+/* VDSO clocksources. */
+#define VDSO_CLOCK_NONE		0	/* No suitable clocksource. */
+#define VDSO_CLOCK_R4K		1	/* Use the coprocessor 0 count. */
+#define VDSO_CLOCK_GIC		2	/* Use the GIC. */
+
+/**
+ * struct arch_clocksource_data - Architecture-specific clocksource information.
+ * @vdso_clock_mode: Method the VDSO should use to access the clocksource.
+ */
+struct arch_clocksource_data {
+	u8 vdso_clock_mode;
+};
+
+#endif /* __ASM_CLOCKSOURCE_H */
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index c4bd54a7f5ce..a9580097cba8 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -130,6 +130,8 @@ typedef union compat_sigval {
 	compat_uptr_t	sival_ptr;
 } compat_sigval_t;
 
+/* Can't use the generic version because si_code and si_errno are swapped */
+
 #define SI_PAD_SIZE32	(128/sizeof(int) - 3)
 
 typedef struct compat_siginfo {
@@ -138,57 +140,61 @@ typedef struct compat_siginfo {
 	int si_errno;
 
 	union {
-		int _pad[SI_PAD_SIZE32];
+		int _pad[128 / sizeof(int) - 3];
 
 		/* kill() */
 		struct {
 			compat_pid_t _pid;	/* sender's pid */
-			__compat_uid_t _uid;	/* sender's uid */
+			__compat_uid32_t _uid;	/* sender's uid */
 		} _kill;
 
+		/* POSIX.1b timers */
+		struct {
+			compat_timer_t _tid;	/* timer id */
+			int _overrun;		/* overrun count */
+			compat_sigval_t _sigval;	/* same as below */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			compat_pid_t _pid;	/* sender's pid */
+			__compat_uid32_t _uid;	/* sender's uid */
+			compat_sigval_t _sigval;
+		} _rt;
+
 		/* SIGCHLD */
 		struct {
 			compat_pid_t _pid;	/* which child */
-			__compat_uid_t _uid;	/* sender's uid */
+			__compat_uid32_t _uid;	/* sender's uid */
 			int _status;		/* exit code */
 			compat_clock_t _utime;
 			compat_clock_t _stime;
 		} _sigchld;
 
-		/* IRIX SIGCHLD */
-		struct {
-			compat_pid_t _pid;	/* which child */
-			compat_clock_t _utime;
-			int _status;		/* exit code */
-			compat_clock_t _stime;
-		} _irix_sigchld;
-
 		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
 		struct {
-			s32 _addr; /* faulting insn/memory ref. */
+			compat_uptr_t _addr;	/* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+			int _trapno;	/* TRAP # which caused the signal */
+#endif
+			short _addr_lsb; /* LSB of the reported address */
+			struct {
+				compat_uptr_t _lower;
+				compat_uptr_t _upper;
+			} _addr_bnd;
 		} _sigfault;
 
-		/* SIGPOLL, SIGXFSZ (To do ...)	 */
+		/* SIGPOLL */
 		struct {
-			int _band;	/* POLL_IN, POLL_OUT, POLL_MSG */
+			compat_long_t _band; /* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
 		} _sigpoll;
 
-		/* POSIX.1b timers */
-		struct {
-			timer_t _tid;		/* timer id */
-			int _overrun;		/* overrun count */
-			compat_sigval_t _sigval;/* same as below */
-			int _sys_private;	/* not to be passed to user */
-		} _timer;
-
-		/* POSIX.1b signals */
 		struct {
-			compat_pid_t _pid;	/* sender's pid */
-			__compat_uid_t _uid;	/* sender's uid */
-			compat_sigval_t _sigval;
-		} _rt;
-
+			compat_uptr_t _call_addr; /* calling insn */
+			int _syscall;	/* triggering system call number */
+			compat_uint_t _arch;	/* AUDIT_ARCH_* of syscall */
+		} _sigsys;
 	} _sifields;
 } compat_siginfo_t;
 
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index fe67f12ac239..eeec8c8e2da2 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -131,11 +131,7 @@
 #endif
 
 #ifndef cpu_has_rixi
-# ifdef CONFIG_64BIT
-# define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
-# else /* CONFIG_32BIT */
-# define cpu_has_rixi		((cpu_data[0].options & MIPS_CPU_RIXI) && !cpu_has_64bits)
-# endif
+#define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
 #endif
 
 #ifndef cpu_has_mmips
@@ -418,4 +414,11 @@
 # define cpu_has_small_pages	(cpu_data[0].options & MIPS_CPU_SP)
 #endif
 
+#ifndef cpu_has_nan_legacy
+#define cpu_has_nan_legacy	(cpu_data[0].options & MIPS_CPU_NAN_LEGACY)
+#endif
+#ifndef cpu_has_nan_2008
+#define cpu_has_nan_2008	(cpu_data[0].options & MIPS_CPU_NAN_2008)
+#endif
+
 #endif /* __ASM_CPU_FEATURES_H */
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index e7dc785a91ca..af12c1f9f1a8 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -102,7 +102,7 @@ extern void cpu_probe(void);
 extern void cpu_report(void);
 
 extern const char *__cpu_name[];
-#define cpu_name_string()	__cpu_name[smp_processor_id()]
+#define cpu_name_string()	__cpu_name[raw_smp_processor_id()]
 
 struct seq_file;
 struct notifier_block;
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 82ad15f11049..a97ca97285ec 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -386,6 +386,8 @@ enum cpu_type_enum {
 #define MIPS_CPU_BP_GHIST	0x8000000000ull /* R12K+ Branch Prediction Global History */
 #define MIPS_CPU_SP		0x10000000000ull /* Small (1KB) page support */
 #define MIPS_CPU_FTLB		0x20000000000ull /* CPU has Fixed-page-size TLB */
+#define MIPS_CPU_NAN_LEGACY	0x40000000000ull /* Legacy NaN implemented */
+#define MIPS_CPU_NAN_2008	0x80000000000ull /* 2008 NaN implemented */
 
 /*
  * CPU ASE encodings
diff --git a/arch/mips/include/asm/debug.h b/arch/mips/include/asm/debug.h
new file mode 100644
index 000000000000..254f00deb9d5
--- /dev/null
+++ b/arch/mips/include/asm/debug.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_DEBUG_H__
+#define __MIPS_ASM_DEBUG_H__
+
+#include <linux/dcache.h>
+
+/*
+ * mips_debugfs_dir corresponds to the "mips" directory at the top level
+ * of the DebugFS hierarchy. MIPS-specific DebugFS entires should be
+ * placed beneath this directory.
+ */
+extern struct dentry *mips_debugfs_dir;
+
+#endif /* __MIPS_ASM_DEBUG_H__ */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index e604f760c4a0..12fa79e2f1b4 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -29,8 +29,6 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
-#include <asm-generic/dma-mapping-common.h>
-
 extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction);
 
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index 53b26933b12c..e090fc388e02 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -8,10 +8,10 @@
 #ifndef _ASM_ELF_H
 #define _ASM_ELF_H
 
+#include <linux/auxvec.h>
 #include <linux/fs.h>
 #include <uapi/linux/elf.h>
 
-#include <asm/cpu-info.h>
 #include <asm/current.h>
 
 /* ELF header e_flags defines. */
@@ -43,6 +43,7 @@
 #define EF_MIPS_OPTIONS_FIRST	0x00000080
 #define EF_MIPS_32BITMODE	0x00000100
 #define EF_MIPS_FP64		0x00000200
+#define EF_MIPS_NAN2008		0x00000400
 #define EF_MIPS_ABI		0x0000f000
 #define EF_MIPS_ARCH		0xf0000000
 
@@ -226,7 +227,7 @@ struct mips_elf_abiflags_v0 {
 	int __res = 1;							\
 	struct elfhdr *__h = (hdr);					\
 									\
-	if (__h->e_machine != EM_MIPS)					\
+	if (!mips_elf_check_machine(__h))				\
 		__res = 0;						\
 	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
 		__res = 0;						\
@@ -257,7 +258,7 @@ struct mips_elf_abiflags_v0 {
 	int __res = 1;							\
 	struct elfhdr *__h = (hdr);					\
 									\
-	if (__h->e_machine != EM_MIPS)					\
+	if (!mips_elf_check_machine(__h))				\
 		__res = 0;						\
 	if (__h->e_ident[EI_CLASS] != ELFCLASS64)			\
 		__res = 0;						\
@@ -284,6 +285,11 @@ struct mips_elf_abiflags_v0 {
 
 #endif /* !defined(ELF_ARCH) */
 
+#define mips_elf_check_machine(x) ((x)->e_machine == EM_MIPS)
+
+#define vmcore_elf32_check_arch mips_elf_check_machine
+#define vmcore_elf64_check_arch mips_elf_check_machine
+
 struct mips_abi;
 
 extern struct mips_abi mips_abi;
@@ -304,7 +310,7 @@ do {									\
 									\
 	current->thread.abi = &mips_abi;				\
 									\
-	current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31;		\
+	mips_set_personality_nan(state);				\
 } while (0)
 
 #endif /* CONFIG_32BIT */
@@ -366,7 +372,7 @@ do {									\
 	else								\
 		current->thread.abi = &mips_abi;			\
 									\
-	current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31;		\
+	mips_set_personality_nan(state);				\
 									\
 	p = personality(current->personality);				\
 	if (p != PER_LINUX32 && p != PER_LINUX)				\
@@ -419,12 +425,19 @@ extern const char *__elf_platform;
 #define ELF_ET_DYN_BASE		(TASK_SIZE / 3 * 2)
 #endif
 
+#define ARCH_DLINFO							\
+do {									\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR,					\
+		    (unsigned long)current->mm->context.vdso);		\
+} while (0)
+
 #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
 struct linux_binprm;
 extern int arch_setup_additional_pages(struct linux_binprm *bprm,
 				       int uses_interp);
 
 struct arch_elf_state {
+	int nan_2008;
 	int fp_abi;
 	int interp_fp_abi;
 	int overall_fp_mode;
@@ -433,17 +446,23 @@ struct arch_elf_state {
 #define MIPS_ABI_FP_UNKNOWN	(-1)	/* Unknown FP ABI (kernel internal) */
 
 #define INIT_ARCH_ELF_STATE {			\
+	.nan_2008 = -1,				\
 	.fp_abi = MIPS_ABI_FP_UNKNOWN,		\
 	.interp_fp_abi = MIPS_ABI_FP_UNKNOWN,	\
 	.overall_fp_mode = -1,			\
 }
 
+/* Whether to accept legacy-NaN and 2008-NaN user binaries.  */
+extern bool mips_use_nan_legacy;
+extern bool mips_use_nan_2008;
+
 extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf,
 			    bool is_interp, struct arch_elf_state *state);
 
-extern int arch_check_elf(void *ehdr, bool has_interpreter,
+extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr,
 			  struct arch_elf_state *state);
 
+extern void mips_set_personality_nan(struct arch_elf_state *state);
 extern void mips_set_personality_fp(struct arch_elf_state *state);
 
 #endif /* _ASM_ELF_H */
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 9cbf383b8834..f06f97bd62df 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -179,6 +179,10 @@ static inline void lose_fpu_inatomic(int save, struct task_struct *tsk)
 		if (save)
 			_save_fp(tsk);
 		__disable_fpu();
+	} else {
+		/* FPU should not have been left enabled with no owner */
+		WARN(read_c0_status() & ST0_CU1,
+		     "Orphaned FPU left enabled");
 	}
 	KSTK_STATUS(tsk) &= ~ST0_CU1;
 	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h
index 2f021cdfba4f..3225c3c0724b 100644
--- a/arch/mips/include/asm/fpu_emulator.h
+++ b/arch/mips/include/asm/fpu_emulator.h
@@ -79,7 +79,7 @@ int mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 /*
  * Break instruction with special math emu break code set
  */
-#define BREAK_MATH (0x0000000d | (BRK_MEMU << 16))
+#define BREAK_MATH(micromips) (((micromips) ? 0x7 : 0xd) | (BRK_MEMU << 16))
 
 #define SIGNALLING_NAN 0x7ff800007ff80000LL
 
diff --git a/arch/mips/include/asm/fw/fw.h b/arch/mips/include/asm/fw/fw.h
index f3e6978aad70..d0ef8b4892bb 100644
--- a/arch/mips/include/asm/fw/fw.h
+++ b/arch/mips/include/asm/fw/fw.h
@@ -10,21 +10,6 @@
 
 #include <asm/bootinfo.h>	/* For cleaner code... */
 
-enum fw_memtypes {
-	fw_dontuse,
-	fw_code,
-	fw_free,
-};
-
-typedef struct {
-	unsigned long base;	/* Within KSEG0 */
-	unsigned int size;	/* bytes */
-	enum fw_memtypes type;	/* fw_memtypes */
-} fw_memblock_t;
-
-/* Maximum number of memory block descriptors. */
-#define FW_MAX_MEMBLOCKS	32
-
 extern int fw_argc;
 extern int *_fw_argv;
 extern int *_fw_envp;
@@ -38,7 +23,6 @@ extern int *_fw_envp;
 
 extern void fw_init_cmdline(void);
 extern char *fw_getcmdline(void);
-extern fw_memblock_t *fw_getmdesc(int);
 extern void fw_meminit(void);
 extern char *fw_getenv(char *name);
 extern unsigned long fw_getenvl(char *name);
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 572e63ec2a38..01880b34a209 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -49,7 +49,6 @@ extern void kunmap(struct page *page);
 extern void *kmap_atomic(struct page *page);
 extern void __kunmap_atomic(void *kvaddr);
 extern void *kmap_atomic_pfn(unsigned long pfn);
-extern struct page *kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index d10fd80dbb7e..2b4dc7ad53b8 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -275,6 +275,7 @@ static inline void __iomem * __ioremap_mode(phys_addr_t offset, unsigned long si
  */
 #define ioremap_cachable(offset, size)					\
 	__ioremap_mode((offset), (size), _page_cachable_default)
+#define ioremap_cache ioremap_cachable
 
 /*
  * These two are MIPS specific ioremap variant.	 ioremap_cacheable_cow
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index e7b138b4b3d3..65c351e328cc 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -84,41 +84,11 @@ static inline void arch_local_irq_restore(unsigned long flags)
 	: "memory");
 }
 
-static inline void __arch_local_irq_restore(unsigned long flags)
-{
-	__asm__ __volatile__(
-	"	.set	push						\n"
-	"	.set	noreorder					\n"
-	"	.set	noat						\n"
-#if defined(CONFIG_IRQ_MIPS_CPU)
-	/*
-	 * Slow, but doesn't suffer from a relatively unlikely race
-	 * condition we're having since days 1.
-	 */
-	"	beqz	%[flags], 1f					\n"
-	"	di							\n"
-	"	ei							\n"
-	"1:								\n"
-#else
-	/*
-	 * Fast, dangerous.  Life is fun, life is good.
-	 */
-	"	mfc0	$1, $12						\n"
-	"	ins	$1, %[flags], 0, 1				\n"
-	"	mtc0	$1, $12						\n"
-#endif
-	"	" __stringify(__irq_disable_hazard) "			\n"
-	"	.set	pop						\n"
-	: [flags] "=r" (flags)
-	: "0" (flags)
-	: "memory");
-}
 #else
 /* Functions that require preempt_{dis,en}able() are in mips-atomic.c */
 void arch_local_irq_disable(void);
 unsigned long arch_local_irq_save(void);
 void arch_local_irq_restore(unsigned long flags);
-void __arch_local_irq_restore(unsigned long flags);
 #endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */
 
 static inline void arch_local_irq_enable(void)
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index 6ded8d347af9..f6b12790716c 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -58,7 +58,7 @@
 #define KVM_MAX_VCPUS		1
 #define KVM_USER_MEM_SLOTS	8
 /* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS 	0
+#define KVM_PRIVATE_MEM_SLOTS	0
 
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 #define KVM_HALT_POLL_NS_DEFAULT 500000
@@ -92,18 +92,10 @@
 #define KVM_INVALID_INST		0xdeadbeef
 #define KVM_INVALID_ADDR		0xdeadbeef
 
-#define KVM_MALTA_GUEST_RTC_ADDR	0xb8000070UL
-
-#define GUEST_TICKS_PER_JIFFY		(40000000/HZ)
-#define MS_TO_NS(x)			(x * 1E6L)
-
-#define CAUSEB_DC			27
-#define CAUSEF_DC			(_ULCAST_(1) << 27)
-
 extern atomic_t kvm_mips_instance;
-extern pfn_t(*kvm_mips_gfn_to_pfn) (struct kvm *kvm, gfn_t gfn);
-extern void (*kvm_mips_release_pfn_clean) (pfn_t pfn);
-extern bool(*kvm_mips_is_error_pfn) (pfn_t pfn);
+extern kvm_pfn_t (*kvm_mips_gfn_to_pfn)(struct kvm *kvm, gfn_t gfn);
+extern void (*kvm_mips_release_pfn_clean)(kvm_pfn_t pfn);
+extern bool (*kvm_mips_is_error_pfn)(kvm_pfn_t pfn);
 
 struct kvm_vm_stat {
 	u32 remote_tlb_flush;
@@ -289,34 +281,6 @@ enum mips_mmu_types {
 	MMU_TYPE_R8000
 };
 
-/*
- * Trap codes
- */
-#define T_INT			0	/* Interrupt pending */
-#define T_TLB_MOD		1	/* TLB modified fault */
-#define T_TLB_LD_MISS		2	/* TLB miss on load or ifetch */
-#define T_TLB_ST_MISS		3	/* TLB miss on a store */
-#define T_ADDR_ERR_LD		4	/* Address error on a load or ifetch */
-#define T_ADDR_ERR_ST		5	/* Address error on a store */
-#define T_BUS_ERR_IFETCH	6	/* Bus error on an ifetch */
-#define T_BUS_ERR_LD_ST		7	/* Bus error on a load or store */
-#define T_SYSCALL		8	/* System call */
-#define T_BREAK			9	/* Breakpoint */
-#define T_RES_INST		10	/* Reserved instruction exception */
-#define T_COP_UNUSABLE		11	/* Coprocessor unusable */
-#define T_OVFLOW		12	/* Arithmetic overflow */
-
-/*
- * Trap definitions added for r4000 port.
- */
-#define T_TRAP			13	/* Trap instruction */
-#define T_VCEI			14	/* Virtual coherency exception */
-#define T_MSAFPE		14	/* MSA floating point exception */
-#define T_FPE			15	/* Floating point exception */
-#define T_MSADIS		21	/* MSA disabled exception */
-#define T_WATCH			23	/* Watch address reference */
-#define T_VCED			31	/* Virtual coherency data */
-
 /* Resume Flags */
 #define RESUME_FLAG_DR		(1<<0)	/* Reload guest nonvolatile state? */
 #define RESUME_FLAG_HOST	(1<<1)	/* Resume host? */
@@ -686,7 +650,6 @@ extern void kvm_mips_dump_host_tlbs(void);
 extern void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu);
 extern void kvm_mips_flush_host_tlb(int skip_kseg0);
 extern int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long entryhi);
-extern int kvm_mips_host_tlb_inv_index(struct kvm_vcpu *vcpu, int index);
 
 extern int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu,
 				     unsigned long entryhi);
diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h
index 4eee221b0cf0..441faa92c3cd 100644
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -115,6 +115,7 @@ static inline int soc_is_qca955x(void)
 	return soc_is_qca9556() || soc_is_qca9558();
 }
 
+void ath79_ddr_wb_flush(unsigned int reg);
 void ath79_ddr_set_pci_windows(void);
 
 extern void __iomem *ath79_pll_base;
@@ -143,4 +144,8 @@ static inline u32 ath79_reset_rr(unsigned reg)
 void ath79_device_reset_set(u32 mask);
 void ath79_device_reset_clear(u32 mask);
 
+void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
+void ath79_misc_irq_init(void __iomem *regs, int irq,
+			int irq_base, bool is_ar71xx);
+
 #endif /* __ASM_MACH_ATH79_H */
diff --git a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
index 1461c10c1c4c..71e4096a2145 100644
--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h
@@ -48,11 +48,6 @@ extern enum bcm47xx_bus_type bcm47xx_bus_type;
 void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
 			bool fallback);
 
-#ifdef CONFIG_BCM47XX_SSB
-void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo,
-				const char *prefix);
-#endif
-
 void bcm47xx_set_system_type(u16 chip_id);
 
 #endif /* __ASM_BCM47XX_H */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
deleted file mode 100644
index 1e6b587f62c9..000000000000
--- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h
+++ /dev/null
@@ -1,96 +0,0 @@
-#ifndef __BCM963XX_TAG_H
-#define __BCM963XX_TAG_H
-
-#define TAGVER_LEN		4	/* Length of Tag Version */
-#define TAGLAYOUT_LEN		4	/* Length of FlashLayoutVer */
-#define SIG1_LEN		20	/* Company Signature 1 Length */
-#define SIG2_LEN		14	/* Company Signature 2 Length */
-#define BOARDID_LEN		16	/* Length of BoardId */
-#define ENDIANFLAG_LEN		2	/* Endian Flag Length */
-#define CHIPID_LEN		6	/* Chip Id Length */
-#define IMAGE_LEN		10	/* Length of Length Field */
-#define ADDRESS_LEN		12	/* Length of Address field */
-#define DUALFLAG_LEN		2	/* Dual Image flag Length */
-#define INACTIVEFLAG_LEN	2	/* Inactie Flag Length */
-#define RSASIG_LEN		20	/* Length of RSA Signature in tag */
-#define TAGINFO1_LEN		30	/* Length of vendor information field1 in tag */
-#define FLASHLAYOUTVER_LEN	4	/* Length of Flash Layout Version String tag */
-#define TAGINFO2_LEN		16	/* Length of vendor information field2 in tag */
-#define ALTTAGINFO_LEN		54	/* Alternate length for vendor information; Pirelli */
-
-#define NUM_PIRELLI		2
-#define IMAGETAG_CRC_START	0xFFFFFFFF
-
-#define PIRELLI_BOARDS { \
-	"AGPF-S0", \
-	"DWV-S0", \
-}
-
-/*
- * The broadcom firmware assumes the rootfs starts the image,
- * therefore uses the rootfs start (flash_image_address)
- * to determine where to flash the image.  Since we have the kernel first
- * we have to give it the kernel address, but the crc uses the length
- * associated with this address (root_length), which is added to the kernel
- * length (kernel_length) to determine the length of image to flash and thus
- * needs to be rootfs + deadcode (jffs2 EOF marker)
-*/
-
-struct bcm_tag {
-	/* 0-3: Version of the image tag */
-	char tag_version[TAGVER_LEN];
-	/* 4-23: Company Line 1 */
-	char sig_1[SIG1_LEN];
-	/*  24-37: Company Line 2 */
-	char sig_2[SIG2_LEN];
-	/* 38-43: Chip this image is for */
-	char chip_id[CHIPID_LEN];
-	/* 44-59: Board name */
-	char board_id[BOARDID_LEN];
-	/* 60-61: Map endianness -- 1 BE 0 LE */
-	char big_endian[ENDIANFLAG_LEN];
-	/* 62-71: Total length of image */
-	char total_length[IMAGE_LEN];
-	/* 72-83: Address in memory of CFE */
-	char cfe__address[ADDRESS_LEN];
-	/* 84-93: Size of CFE */
-	char cfe_length[IMAGE_LEN];
-	/* 94-105: Address in memory of image start
-	 * (kernel for OpenWRT, rootfs for stock firmware)
-	 */
-	char flash_image_start[ADDRESS_LEN];
-	/* 106-115: Size of rootfs */
-	char root_length[IMAGE_LEN];
-	/* 116-127: Address in memory of kernel */
-	char kernel_address[ADDRESS_LEN];
-	/* 128-137: Size of kernel */
-	char kernel_length[IMAGE_LEN];
-	/* 138-139: Unused at the moment */
-	char dual_image[DUALFLAG_LEN];
-	/* 140-141: Unused at the moment */
-	char inactive_flag[INACTIVEFLAG_LEN];
-	/* 142-161: RSA Signature (not used; some vendors may use this) */
-	char rsa_signature[RSASIG_LEN];
-	/* 162-191: Compilation and related information (not used in OpenWrt) */
-	char information1[TAGINFO1_LEN];
-	/* 192-195: Version flash layout */
-	char flash_layout_ver[FLASHLAYOUTVER_LEN];
-	/* 196-199: kernel+rootfs CRC32 */
-	__u32 fskernel_crc;
-	/* 200-215: Unused except on Alice Gate where is is information */
-	char information2[TAGINFO2_LEN];
-	/* 216-219: CRC32 of image less imagetag (kernel for Alice Gate) */
-	__u32 image_crc;
-	/* 220-223: CRC32 of rootfs partition */
-	__u32 rootfs_crc;
-	/* 224-227: CRC32 of kernel partition */
-	__u32 kernel_crc;
-	/* 228-235: Unused at present */
-	char reserved1[8];
-	/* 236-239: CRC32 of header excluding last 20 bytes */
-	__u32 header_crc;
-	/* 240-255: Unused at present */
-	char reserved2[16];
-};
-
-#endif /* __BCM63XX_TAG_H */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
index cf92fe733995..c4873e8594ef 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -141,7 +141,7 @@ octeon_main_processor:
 .endm
 
 /*
- * Do SMP slave processor setup necessary before we can savely execute C code.
+ * Do SMP slave processor setup necessary before we can safely execute C code.
  */
 	.macro	smp_slave_setup
 	.endm
diff --git a/arch/mips/include/asm/mach-generic/kernel-entry-init.h b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
index 13b0751b010a..a229297c880b 100644
--- a/arch/mips/include/asm/mach-generic/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-generic/kernel-entry-init.h
@@ -16,7 +16,7 @@
 	.endm
 
 /*
- * Do SMP slave processor setup necessary before we can savely execute C code.
+ * Do SMP slave processor setup necessary before we can safely execute C code.
  */
 	.macro	smp_slave_setup
 	.endm
diff --git a/arch/mips/include/asm/mach-ip27/irq.h b/arch/mips/include/asm/mach-ip27/irq.h
index cf4384bfa846..b0b7261ff3ad 100644
--- a/arch/mips/include/asm/mach-ip27/irq.h
+++ b/arch/mips/include/asm/mach-ip27/irq.h
@@ -11,7 +11,7 @@
 #define __ASM_MACH_IP27_IRQ_H
 
 /*
- * A hardwired interrupt number is completly stupid for this system - a
+ * A hardwired interrupt number is completely stupid for this system - a
  * large configuration might have thousands if not tenthousands of
  * interrupts.
  */
diff --git a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
index b087cb83da3a..f992c1db876b 100644
--- a/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-ip27/kernel-entry-init.h
@@ -81,7 +81,7 @@
 	.endm
 
 /*
- * Do SMP slave processor setup necessary before we can savely execute C code.
+ * Do SMP slave processor setup necessary before we can safely execute C code.
  */
 	.macro	smp_slave_setup
 	GET_NASID_ASM	t1
diff --git a/arch/mips/include/asm/mach-jz4740/gpio.h b/arch/mips/include/asm/mach-jz4740/gpio.h
index bf8c3e1860e7..7c7708a23baa 100644
--- a/arch/mips/include/asm/mach-jz4740/gpio.h
+++ b/arch/mips/include/asm/mach-jz4740/gpio.h
@@ -27,7 +27,7 @@ enum jz_gpio_function {
 
 /*
  Usually a driver for a SoC component has to request several gpio pins and
- configure them as funcion pins.
+ configure them as function pins.
  jz_gpio_bulk_request can be used to ease this process.
  Usually one would do something like:
 
diff --git a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
index 79cff26d8b36..398733e3e2cf 100644
--- a/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
+++ b/arch/mips/include/asm/mach-jz4740/jz4740_nand.h
@@ -25,8 +25,6 @@ struct jz_nand_platform_data {
 	int			num_partitions;
 	struct mtd_partition	*partitions;
 
-	struct nand_ecclayout	*ecc_layout;
-
 	unsigned char banks[JZ_NAND_NUM_BANKS];
 
 	void (*ident_callback)(struct platform_device *, struct nand_chip *,
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
index 133336b493b6..dd6005b75e0c 100644
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -35,6 +35,17 @@
 #define SOC_ID_VRX268_2		0x00C /* v1.2 */
 #define SOC_ID_GRX288_2		0x00D /* v1.2 */
 #define SOC_ID_GRX282_2		0x00E /* v1.2 */
+#define SOC_ID_VRX220		0x000
+
+#define SOC_ID_ARX362		0x004
+#define SOC_ID_ARX368		0x005
+#define SOC_ID_ARX382		0x007
+#define SOC_ID_ARX388		0x008
+#define SOC_ID_URX388		0x009
+#define SOC_ID_GRX383		0x010
+#define SOC_ID_GRX369		0x011
+#define SOC_ID_GRX387		0x00F
+#define SOC_ID_GRX389		0x012
 
  /* SoC Types */
 #define SOC_TYPE_DANUBE		0x01
@@ -43,6 +54,9 @@
 #define SOC_TYPE_VR9		0x04 /* v1.1 */
 #define SOC_TYPE_VR9_2		0x05 /* v1.2 */
 #define SOC_TYPE_AMAZON_SE	0x06
+#define SOC_TYPE_AR10		0x07
+#define SOC_TYPE_GRX390		0x08
+#define SOC_TYPE_VRX220		0x09
 
 /* BOOT_SEL - find what boot media we have */
 #define BS_EXT_ROM		0x0
diff --git a/arch/mips/include/asm/mach-malta/malta-dtshim.h b/arch/mips/include/asm/mach-malta/malta-dtshim.h
new file mode 100644
index 000000000000..cfd777663c64
--- /dev/null
+++ b/arch/mips/include/asm/mach-malta/malta-dtshim.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_MALTA_DTSHIM_H__
+#define __MIPS_MALTA_DTSHIM_H__
+
+#include <linux/init.h>
+
+#ifdef CONFIG_MIPS_MALTA
+
+extern void __init *malta_dt_shim(void *fdt);
+
+#else /* !CONFIG_MIPS_MALTA */
+
+static inline void *malta_dt_shim(void *fdt)
+{
+	return fdt;
+}
+
+#endif /* !CONFIG_MIPS_MALTA */
+
+#endif /* __MIPS_MALTA_DTSHIM_H__ */
diff --git a/arch/mips/include/asm/mach-pic32/cpu-feature-overrides.h b/arch/mips/include/asm/mach-pic32/cpu-feature-overrides.h
new file mode 100644
index 000000000000..468230834e2f
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/cpu-feature-overrides.h
@@ -0,0 +1,32 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_MACH_PIC32_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_PIC32_CPU_FEATURE_OVERRIDES_H
+
+/*
+ * CPU feature overrides for PIC32 boards
+ */
+#ifdef CONFIG_CPU_MIPS32
+#define cpu_has_vint		1
+#define cpu_has_veic		0
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_4k_cache	1
+#define cpu_has_fpu		0
+#define cpu_has_counter		1
+#define cpu_has_llsc		1
+#define cpu_has_nofpuex		0
+#define cpu_icache_snoops_remote_store 1
+#endif
+
+#ifdef CONFIG_CPU_MIPS64
+#error This platform does not support 64bit.
+#endif
+
+#endif /* __ASM_MACH_PIC32_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-pic32/irq.h b/arch/mips/include/asm/mach-pic32/irq.h
new file mode 100644
index 000000000000..864330ce8838
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/irq.h
@@ -0,0 +1,22 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+#ifndef __ASM_MACH_PIC32_IRQ_H
+#define __ASM_MACH_PIC32_IRQ_H
+
+#define NR_IRQS	256
+#define MIPS_CPU_IRQ_BASE 0
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_PIC32_IRQ_H */
diff --git a/arch/mips/include/asm/mach-pic32/pic32.h b/arch/mips/include/asm/mach-pic32/pic32.h
new file mode 100644
index 000000000000..ce52e918daae
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/pic32.h
@@ -0,0 +1,44 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+#ifndef _ASM_MACH_PIC32_H
+#define _ASM_MACH_PIC32_H
+
+#include <linux/io.h>
+
+/*
+ * PIC32 register offsets for SET/CLR/INV where supported.
+ */
+#define PIC32_CLR(_reg)		((_reg) + 0x04)
+#define PIC32_SET(_reg)		((_reg) + 0x08)
+#define PIC32_INV(_reg)		((_reg) + 0x0C)
+
+/*
+ * PIC32 Base Register Offsets
+ */
+#define PIC32_BASE_CONFIG	0x1f800000
+#define PIC32_BASE_OSC		0x1f801200
+#define PIC32_BASE_RESET	0x1f801240
+#define PIC32_BASE_PPS		0x1f801400
+#define PIC32_BASE_UART		0x1f822000
+#define PIC32_BASE_PORT		0x1f860000
+#define PIC32_BASE_DEVCFG2	0x1fc4ff44
+
+/*
+ * Register unlock sequence required for some register access.
+ */
+void pic32_syskey_unlock_debug(const char *fn, const ulong ln);
+#define pic32_syskey_unlock()	\
+	pic32_syskey_unlock_debug(__func__, __LINE__)
+
+#endif /* _ASM_MACH_PIC32_H */
diff --git a/arch/mips/include/asm/mach-pic32/spaces.h b/arch/mips/include/asm/mach-pic32/spaces.h
new file mode 100644
index 000000000000..046a0a9aa8b3
--- /dev/null
+++ b/arch/mips/include/asm/mach-pic32/spaces.h
@@ -0,0 +1,24 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ */
+#ifndef _ASM_MACH_PIC32_SPACES_H
+#define _ASM_MACH_PIC32_SPACES_H
+
+#ifdef CONFIG_PIC32MZDA
+#define PHYS_OFFSET	_AC(0x08000000, UL)
+#define UNCAC_BASE	_AC(0xa8000000, UL)
+#endif
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* __ASM_MACH_PIC32_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ralink/irq.h b/arch/mips/include/asm/mach-ralink/irq.h
new file mode 100644
index 000000000000..4321865e04b9
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_RALINK_IRQ_H
+#define __ASM_MACH_RALINK_IRQ_H
+
+#define GIC_NUM_INTRS	64
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif
diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
index 1976fb815fd1..455d406e8ddf 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -13,17 +13,11 @@
 #ifndef _MT7620_REGS_H_
 #define _MT7620_REGS_H_
 
-enum mt762x_soc_type {
-	MT762X_SOC_UNKNOWN = 0,
-	MT762X_SOC_MT7620A,
-	MT762X_SOC_MT7620N,
-	MT762X_SOC_MT7628AN,
-};
-
 #define MT7620_SYSC_BASE		0x10000000
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04
+#define SYSC_REG_EFUSE_CFG		0x08
 #define SYSC_REG_CHIP_REV		0x0c
 #define SYSC_REG_SYSTEM_CONFIG0		0x10
 #define SYSC_REG_SYSTEM_CONFIG1		0x14
diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
new file mode 100644
index 000000000000..610b61e3f9df
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -0,0 +1,38 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _MT7621_REGS_H_
+#define _MT7621_REGS_H_
+
+#define MT7621_PALMBUS_BASE		0x1C000000
+#define MT7621_PALMBUS_SIZE		0x03FFFFFF
+
+#define MT7621_SYSC_BASE		0x1E000000
+
+#define SYSC_REG_CHIP_NAME0		0x00
+#define SYSC_REG_CHIP_NAME1		0x04
+#define SYSC_REG_CHIP_REV		0x0c
+#define SYSC_REG_SYSTEM_CONFIG0		0x10
+#define SYSC_REG_SYSTEM_CONFIG1		0x14
+
+#define CHIP_REV_PKG_MASK		0x1
+#define CHIP_REV_PKG_SHIFT		16
+#define CHIP_REV_VER_MASK		0xf
+#define CHIP_REV_VER_SHIFT		8
+#define CHIP_REV_ECO_MASK		0xf
+
+#define MT7621_DRAM_BASE                0x0
+#define MT7621_DDR2_SIZE_MIN		32
+#define MT7621_DDR2_SIZE_MAX		256
+
+#define MT7621_CHIP_NAME0		0x3637544D
+#define MT7621_CHIP_NAME1		0x20203132
+
+#define MIPS_GIC_IRQ_BASE           (MIPS_CPU_IRQ_BASE + 8)
+
+#endif
diff --git a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
new file mode 100644
index 000000000000..15db1b330fe8
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
@@ -0,0 +1,65 @@
+/*
+ * Ralink MT7621 specific CPU feature overrides
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This file was derived from: include/asm-mips/cpu-features.h
+ *	Copyright (C) 2003, 2004 Ralf Baechle
+ *	Copyright (C) 2004 Maciej W. Rozycki
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+#ifndef _MT7621_CPU_FEATURE_OVERRIDES_H
+#define _MT7621_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb		1
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_tx39_cache	0
+#define cpu_has_sb1_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_32fpr		0
+#define cpu_has_counter		1
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+
+#define cpu_has_prefetch	1
+#define cpu_has_ejtag		1
+#define cpu_has_llsc		1
+
+#define cpu_has_mips16		1
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+
+#define cpu_has_mips32r1	1
+#define cpu_has_mips32r2	1
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#define cpu_has_dsp		1
+#define cpu_has_dsp2		0
+#define cpu_has_mipsmt		1
+
+#define cpu_has_64bits		0
+#define cpu_has_64bit_zero_reg	0
+#define cpu_has_64bit_gp_regs	0
+#define cpu_has_64bit_addresses	0
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+
+#define cpu_has_dc_aliases	0
+#define cpu_has_vtag_icache	0
+
+#define cpu_has_rixi		0
+#define cpu_has_tlbinv		0
+#define cpu_has_userlocal	1
+
+#endif /* _MT7621_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
index bd93014490df..4c9fba68c8b2 100644
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -13,6 +13,23 @@
 #ifndef _RALINK_REGS_H_
 #define _RALINK_REGS_H_
 
+enum ralink_soc_type {
+	RALINK_UNKNOWN = 0,
+	RT2880_SOC,
+	RT3883_SOC,
+	RT305X_SOC_RT3050,
+	RT305X_SOC_RT3052,
+	RT305X_SOC_RT3350,
+	RT305X_SOC_RT3352,
+	RT305X_SOC_RT5350,
+	MT762X_SOC_MT7620A,
+	MT762X_SOC_MT7620N,
+	MT762X_SOC_MT7621AT,
+	MT762X_SOC_MT7628AN,
+	MT762X_SOC_MT7688,
+};
+extern enum ralink_soc_type ralink_soc;
+
 extern __iomem void *rt_sysc_membase;
 extern __iomem void *rt_memc_membase;
 
diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
index 96f731bac79a..2eea79331a14 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -13,25 +13,16 @@
 #ifndef _RT305X_REGS_H_
 #define _RT305X_REGS_H_
 
-enum rt305x_soc_type {
-	RT305X_SOC_UNKNOWN = 0,
-	RT305X_SOC_RT3050,
-	RT305X_SOC_RT3052,
-	RT305X_SOC_RT3350,
-	RT305X_SOC_RT3352,
-	RT305X_SOC_RT5350,
-};
-
-extern enum rt305x_soc_type rt305x_soc;
+extern enum ralink_soc_type ralink_soc;
 
 static inline int soc_is_rt3050(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3050;
+	return ralink_soc == RT305X_SOC_RT3050;
 }
 
 static inline int soc_is_rt3052(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3052;
+	return ralink_soc == RT305X_SOC_RT3052;
 }
 
 static inline int soc_is_rt305x(void)
@@ -41,17 +32,17 @@ static inline int soc_is_rt305x(void)
 
 static inline int soc_is_rt3350(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3350;
+	return ralink_soc == RT305X_SOC_RT3350;
 }
 
 static inline int soc_is_rt3352(void)
 {
-	return rt305x_soc == RT305X_SOC_RT3352;
+	return ralink_soc == RT305X_SOC_RT3352;
 }
 
 static inline int soc_is_rt5350(void)
 {
-	return rt305x_soc == RT305X_SOC_RT5350;
+	return ralink_soc == RT305X_SOC_RT5350;
 }
 
 #define RT305X_SYSC_BASE		0x10000000
diff --git a/arch/mips/include/asm/mach-xilfpga/irq.h b/arch/mips/include/asm/mach-xilfpga/irq.h
new file mode 100644
index 000000000000..0132a5b91f57
--- /dev/null
+++ b/arch/mips/include/asm/mach-xilfpga/irq.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MACH_XILFPGA_IRQ_H__
+#define __MIPS_ASM_MACH_XILFPGA_IRQ_H__
+
+#define NR_IRQS 32
+
+#include_next <irq.h>
+
+#endif /* __MIPS_ASM_MACH_XILFPGA_IRQ_H__ */
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h
index 1f1927ab4269..d4635391c36a 100644
--- a/arch/mips/include/asm/mips-cm.h
+++ b/arch/mips/include/asm/mips-cm.h
@@ -11,6 +11,7 @@
 #ifndef __MIPS_ASM_MIPS_CM_H__
 #define __MIPS_ASM_MIPS_CM_H__
 
+#include <linux/bitops.h>
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <linux/types.h>
@@ -27,7 +28,7 @@ extern void __iomem *mips_cm_l2sync_base;
  * This function returns the physical base address of the Coherence Manager
  * global control block, or 0 if no Coherence Manager is present. It provides
  * a default implementation which reads the CMGCRBase register where available,
- * and may be overriden by platforms which determine this address in a
+ * and may be overridden by platforms which determine this address in a
  * different way by defining a function with the same prototype except for the
  * name mips_cm_phys_base (without underscores).
  */
@@ -36,12 +37,12 @@ extern phys_addr_t __mips_cm_phys_base(void);
 /*
  * mips_cm_is64 - determine CM register width
  *
- * The CM register width is processor and CM specific. A 64-bit processor
- * usually has a 64-bit CM and a 32-bit one has a 32-bit CM but a 64-bit
- * processor could come with a 32-bit CM. Moreover, accesses on 64-bit CMs
- * can be done either using regular 64-bit load/store instructions, or 32-bit
- * load/store instruction on 32-bit register pairs. We opt for using 64-bit
- * accesses on 64-bit CMs and kernels and 32-bit in any other case.
+ * The CM register width is determined by the version of the CM, with CM3
+ * introducing 64 bit GCRs and all prior CM versions having 32 bit GCRs.
+ * However we may run a kernel built for MIPS32 on a system with 64 bit GCRs,
+ * or vice-versa. This variable indicates the width of the memory accesses
+ * that the kernel will perform to GCRs, which may differ from the actual
+ * width of the GCRs.
  *
  * It's set to 0 for 32-bit accesses and 1 for 64-bit accesses.
  */
@@ -125,7 +126,17 @@ static inline u32 read32_gcr_##name(void)			\
 								\
 static inline u64 read64_gcr_##name(void)			\
 {								\
-	return __raw_readq(addr_gcr_##name());			\
+	void __iomem *addr = addr_gcr_##name();			\
+	u64 ret;						\
+								\
+	if (mips_cm_is64) {					\
+		ret = __raw_readq(addr);			\
+	} else {						\
+		ret = __raw_readl(addr);			\
+		ret |= (u64)__raw_readl(addr + 0x4) << 32;	\
+	}							\
+								\
+	return ret;						\
 }								\
 								\
 static inline unsigned long read_gcr_##name(void)		\
@@ -195,6 +206,8 @@ BUILD_CM_R_(gic_status,		MIPS_CM_GCB_OFS + 0xd0)
 BUILD_CM_R_(cpc_status,		MIPS_CM_GCB_OFS + 0xf0)
 BUILD_CM_RW(l2_config,		MIPS_CM_GCB_OFS + 0x130)
 BUILD_CM_RW(sys_config2,	MIPS_CM_GCB_OFS + 0x150)
+BUILD_CM_RW(l2_pft_control,	MIPS_CM_GCB_OFS + 0x300)
+BUILD_CM_RW(l2_pft_control_b,	MIPS_CM_GCB_OFS + 0x308)
 
 /* Core Local & Core Other register accessor functions */
 BUILD_CM_Cx_RW(reset_release,	0x00)
@@ -230,6 +243,10 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define  CM_GCR_BASE_CMDEFTGT_IOCU0		2
 #define  CM_GCR_BASE_CMDEFTGT_IOCU1		3
 
+/* GCR_RESET_EXT_BASE register fields */
+#define CM_GCR_RESET_EXT_BASE_EVARESET		BIT(31)
+#define CM_GCR_RESET_EXT_BASE_UEB		BIT(30)
+
 /* GCR_ACCESS register fields */
 #define CM_GCR_ACCESS_ACCESSEN_SHF		0
 #define CM_GCR_ACCESS_ACCESSEN_MSK		(_ULCAST_(0xff) << 0)
@@ -245,11 +262,14 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 		 ((minor) << CM_GCR_REV_MINOR_SHF))
 
 #define CM_REV_CM2				CM_ENCODE_REV(6, 0)
+#define CM_REV_CM2_5				CM_ENCODE_REV(7, 0)
 #define CM_REV_CM3				CM_ENCODE_REV(8, 0)
 
 /* GCR_ERROR_CAUSE register fields */
 #define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF		27
 #define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK		(_ULCAST_(0x1f) << 27)
+#define CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF		58
+#define CM3_GCR_ERROR_CAUSE_ERRTYPE_MSK		GENMASK_ULL(63, 58)
 #define CM_GCR_ERROR_CAUSE_ERRINFO_SHF		0
 #define CM_GCR_ERROR_CAUSE_ERRINGO_MSK		(_ULCAST_(0x7ffffff) << 0)
 
@@ -321,6 +341,20 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define CM_GCR_SYS_CONFIG2_MAXVPW_SHF		0
 #define CM_GCR_SYS_CONFIG2_MAXVPW_MSK		(_ULCAST_(0xf) << 0)
 
+/* GCR_L2_PFT_CONTROL register fields */
+#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_SHF	12
+#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK	(_ULCAST_(0xfffff) << 12)
+#define CM_GCR_L2_PFT_CONTROL_PFTEN_SHF		8
+#define CM_GCR_L2_PFT_CONTROL_PFTEN_MSK		(_ULCAST_(0x1) << 8)
+#define CM_GCR_L2_PFT_CONTROL_NPFT_SHF		0
+#define CM_GCR_L2_PFT_CONTROL_NPFT_MSK		(_ULCAST_(0xff) << 0)
+
+/* GCR_L2_PFT_CONTROL_B register fields */
+#define CM_GCR_L2_PFT_CONTROL_B_CEN_SHF		8
+#define CM_GCR_L2_PFT_CONTROL_B_CEN_MSK		(_ULCAST_(0x1) << 8)
+#define CM_GCR_L2_PFT_CONTROL_B_PORTID_SHF	0
+#define CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK	(_ULCAST_(0xff) << 0)
+
 /* GCR_Cx_COHERENCE register fields */
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF	0
 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK	(_ULCAST_(0xff) << 0)
@@ -329,11 +363,15 @@ BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
 #define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF		10
 #define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK		(_ULCAST_(0x3) << 10)
 #define CM_GCR_Cx_CONFIG_PVPE_SHF		0
-#define CM_GCR_Cx_CONFIG_PVPE_MSK		(_ULCAST_(0x1ff) << 0)
+#define CM_GCR_Cx_CONFIG_PVPE_MSK		(_ULCAST_(0x3ff) << 0)
 
 /* GCR_Cx_OTHER register fields */
 #define CM_GCR_Cx_OTHER_CORENUM_SHF		16
 #define CM_GCR_Cx_OTHER_CORENUM_MSK		(_ULCAST_(0xffff) << 16)
+#define CM3_GCR_Cx_OTHER_CORE_SHF		8
+#define CM3_GCR_Cx_OTHER_CORE_MSK		(_ULCAST_(0x3f) << 8)
+#define CM3_GCR_Cx_OTHER_VP_SHF			0
+#define CM3_GCR_Cx_OTHER_VP_MSK			(_ULCAST_(0x7) << 0)
 
 /* GCR_Cx_RESET_BASE register fields */
 #define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF	12
@@ -444,4 +482,32 @@ static inline unsigned int mips_cm_vp_id(unsigned int cpu)
 	return (core * mips_cm_max_vp_width()) + vp;
 }
 
+#ifdef CONFIG_MIPS_CM
+
+/**
+ * mips_cm_lock_other - lock access to another core
+ * @core: the other core to be accessed
+ * @vp: the VP within the other core to be accessed
+ *
+ * Call before operating upon a core via the 'other' register region in
+ * order to prevent the region being moved during access. Must be followed
+ * by a call to mips_cm_unlock_other.
+ */
+extern void mips_cm_lock_other(unsigned int core, unsigned int vp);
+
+/**
+ * mips_cm_unlock_other - unlock access to another core
+ *
+ * Call after operating upon another core via the 'other' register region.
+ * Must be called after mips_cm_lock_other.
+ */
+extern void mips_cm_unlock_other(void);
+
+#else /* !CONFIG_MIPS_CM */
+
+static inline void mips_cm_lock_other(unsigned int core) { }
+static inline void mips_cm_unlock_other(void) { }
+
+#endif /* !CONFIG_MIPS_CM */
+
 #endif /* __MIPS_ASM_MIPS_CM_H__ */
diff --git a/arch/mips/include/asm/mips-cpc.h b/arch/mips/include/asm/mips-cpc.h
index f386f32702f1..e09035239e53 100644
--- a/arch/mips/include/asm/mips-cpc.h
+++ b/arch/mips/include/asm/mips-cpc.h
@@ -149,7 +149,8 @@ BUILD_CPC_Cx_RW(other,		0x10)
  * core: the other core to be accessed
  *
  * Call before operating upon a core via the 'other' register region in
- * order to prevent the region being moved during access. Must be followed
+ * order to prevent the region being moved during access. Must be called
+ * within the bounds of a mips_cm_{lock,unlock}_other pair, and followed
  * by a call to mips_cpc_unlock_other.
  */
 extern void mips_cpc_lock_other(unsigned int core);
diff --git a/arch/mips/include/asm/mips-r2-to-r6-emul.h b/arch/mips/include/asm/mips-r2-to-r6-emul.h
index 4b89f28047f7..20621e1ca238 100644
--- a/arch/mips/include/asm/mips-r2-to-r6-emul.h
+++ b/arch/mips/include/asm/mips-r2-to-r6-emul.h
@@ -52,7 +52,7 @@ do {									\
 	__this_cpu_inc(mipsr2emustats.M);				\
 	err = __get_user(nir, (u32 __user *)regs->cp0_epc);		\
 	if (!err) {							\
-		if (nir == BREAK_MATH)					\
+		if (nir == BREAK_MATH(0))				\
 			__this_cpu_inc(mipsr2bdemustats.M);		\
 	}								\
 	preempt_enable();						\
@@ -79,7 +79,7 @@ struct r2_decoder_table {
 };
 
 
-extern void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
+extern void do_trap_or_bp(struct pt_regs *regs, unsigned int code, int si_code,
 			  const char *str);
 
 #ifndef CONFIG_MIPSR2_TO_R6_EMULATOR
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index c64781cf649f..3ad19ad04d8a 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -50,7 +50,9 @@
 #define CP0_PAGEMASK $5
 #define CP0_WIRED $6
 #define CP0_INFO $7
+#define CP0_HWRENA $7, 0
 #define CP0_BADVADDR $8
+#define CP0_BADINSTR $8, 1
 #define CP0_COUNT $9
 #define CP0_ENTRYHI $10
 #define CP0_COMPARE $11
@@ -58,7 +60,11 @@
 #define CP0_CAUSE $13
 #define CP0_EPC $14
 #define CP0_PRID $15
+#define CP0_EBASE $15, 1
+#define CP0_CMGCRBASE $15, 3
 #define CP0_CONFIG $16
+#define CP0_CONFIG3 $16, 3
+#define CP0_CONFIG5 $16, 5
 #define CP0_LLADDR $17
 #define CP0_WATCHLO $18
 #define CP0_WATCHHI $19
@@ -126,15 +132,9 @@
 #define R3K_ENTRYLO_N		(_ULCAST_(1) << 11)
 
 /* MIPS32/64 EntryLo bit definitions */
-#ifdef CONFIG_64BIT
-/* as read by dmfc0 */
-#define MIPS_ENTRYLO_XI		(_ULCAST_(1) << 62)
-#define MIPS_ENTRYLO_RI		(_ULCAST_(1) << 63)
-#else
-/* as read by mfc0 */
-#define MIPS_ENTRYLO_XI		(_ULCAST_(1) << 30)
-#define MIPS_ENTRYLO_RI		(_ULCAST_(1) << 31)
-#endif
+#define MIPS_ENTRYLO_PFN_SHIFT	6
+#define MIPS_ENTRYLO_XI		(_ULCAST_(1) << (BITS_PER_LONG - 2))
+#define MIPS_ENTRYLO_RI		(_ULCAST_(1) << (BITS_PER_LONG - 1))
 
 /*
  * Values for PageMask register
@@ -394,6 +394,8 @@
 #define CAUSEF_IV		(_ULCAST_(1)   << 23)
 #define CAUSEB_PCI		26
 #define CAUSEF_PCI		(_ULCAST_(1)   << 26)
+#define CAUSEB_DC		27
+#define CAUSEF_DC		(_ULCAST_(1)   << 27)
 #define CAUSEB_CE		28
 #define CAUSEF_CE		(_ULCAST_(3)   << 28)
 #define CAUSEB_TI		30
@@ -402,6 +404,38 @@
 #define CAUSEF_BD		(_ULCAST_(1)   << 31)
 
 /*
+ * Cause.ExcCode trap codes.
+ */
+#define EXCCODE_INT		0	/* Interrupt pending */
+#define EXCCODE_MOD		1	/* TLB modified fault */
+#define EXCCODE_TLBL		2	/* TLB miss on load or ifetch */
+#define EXCCODE_TLBS		3	/* TLB miss on a store */
+#define EXCCODE_ADEL		4	/* Address error on a load or ifetch */
+#define EXCCODE_ADES		5	/* Address error on a store */
+#define EXCCODE_IBE		6	/* Bus error on an ifetch */
+#define EXCCODE_DBE		7	/* Bus error on a load or store */
+#define EXCCODE_SYS		8	/* System call */
+#define EXCCODE_BP		9	/* Breakpoint */
+#define EXCCODE_RI		10	/* Reserved instruction exception */
+#define EXCCODE_CPU		11	/* Coprocessor unusable */
+#define EXCCODE_OV		12	/* Arithmetic overflow */
+#define EXCCODE_TR		13	/* Trap instruction */
+#define EXCCODE_MSAFPE		14	/* MSA floating point exception */
+#define EXCCODE_FPE		15	/* Floating point exception */
+#define EXCCODE_TLBRI		19	/* TLB Read-Inhibit exception */
+#define EXCCODE_TLBXI		20	/* TLB Execution-Inhibit exception */
+#define EXCCODE_MSADIS		21	/* MSA disabled exception */
+#define EXCCODE_MDMX		22	/* MDMX unusable exception */
+#define EXCCODE_WATCH		23	/* Watch address reference */
+#define EXCCODE_MCHECK		24	/* Machine check */
+#define EXCCODE_THREAD		25	/* Thread exceptions (MT) */
+#define EXCCODE_DSPDIS		26	/* DSP disabled exception */
+#define EXCCODE_GE		27	/* Virtualized guest exception (VZ) */
+
+/* Implementation specific trap codes used by MIPS cores */
+#define MIPS_EXCCODE_TLBPAR	16	/* TLB parity error exception */
+
+/*
  * Bits in the coprocessor 0 config register.
  */
 /* Generic bits.  */
diff --git a/arch/mips/include/asm/octeon/cvmx-config.h b/arch/mips/include/asm/octeon/cvmx-config.h
index f7dd17d0dc22..f4f1996e0fac 100644
--- a/arch/mips/include/asm/octeon/cvmx-config.h
+++ b/arch/mips/include/asm/octeon/cvmx-config.h
@@ -33,7 +33,7 @@
 /* Packet buffers */
 #define CVMX_FPA_PACKET_POOL		    (0)
 #define CVMX_FPA_PACKET_POOL_SIZE	    CVMX_FPA_POOL_0_SIZE
-/* Work queue entrys */
+/* Work queue entries */
 #define CVMX_FPA_WQE_POOL		    (1)
 #define CVMX_FPA_WQE_POOL_SIZE		    CVMX_FPA_POOL_1_SIZE
 /* PKO queue command buffers */
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
index 774bb45834cb..3e982e0c397e 100644
--- a/arch/mips/include/asm/octeon/cvmx.h
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -189,7 +189,7 @@ static inline uint64_t cvmx_ptr_to_phys(void *ptr)
 static inline void *cvmx_phys_to_ptr(uint64_t physical_address)
 {
 	if (sizeof(void *) == 8) {
-		/* Just set the top bit, avoiding any TLB uglyness */
+		/* Just set the top bit, avoiding any TLB ugliness */
 		return CASTPTR(void,
 			       CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
 					    physical_address));
@@ -275,6 +275,11 @@ static inline void cvmx_write_csr(uint64_t csr_addr, uint64_t val)
 		cvmx_read64(CVMX_MIO_BOOT_BIST_STAT);
 }
 
+static inline void cvmx_writeq_csr(void __iomem *csr_addr, uint64_t val)
+{
+	cvmx_write_csr((__force uint64_t)csr_addr, val);
+}
+
 static inline void cvmx_write_io(uint64_t io_addr, uint64_t val)
 {
 	cvmx_write64(io_addr, val);
@@ -287,6 +292,10 @@ static inline uint64_t cvmx_read_csr(uint64_t csr_addr)
 	return val;
 }
 
+static inline uint64_t cvmx_readq_csr(void __iomem *csr_addr)
+{
+	return cvmx_read_csr((__force uint64_t) csr_addr);
+}
 
 static inline void cvmx_send_single(uint64_t data)
 {
diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h
index 8ebd3f579b84..3ed10a8d7865 100644
--- a/arch/mips/include/asm/octeon/octeon-feature.h
+++ b/arch/mips/include/asm/octeon/octeon-feature.h
@@ -128,7 +128,8 @@ static inline int octeon_has_feature(enum octeon_feature feature)
 	case OCTEON_FEATURE_PCIE:
 		return OCTEON_IS_MODEL(OCTEON_CN56XX)
 			|| OCTEON_IS_MODEL(OCTEON_CN52XX)
-			|| OCTEON_IS_MODEL(OCTEON_CN6XXX);
+			|| OCTEON_IS_MODEL(OCTEON_CN6XXX)
+			|| OCTEON_IS_MODEL(OCTEON_CN7XXX);
 
 	case OCTEON_FEATURE_SRIO:
 		return OCTEON_IS_MODEL(OCTEON_CN63XX)
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index 89dd7fed1a57..21ed7150fec3 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -200,8 +200,9 @@ static inline int pfn_valid(unsigned long pfn)
 {
 	/* avoid <linux/mm.h> include hell */
 	extern unsigned long max_mapnr;
+	unsigned long pfn_offset = ARCH_PFN_OFFSET;
 
-	return pfn >= ARCH_PFN_OFFSET && pfn < max_mapnr;
+	return pfn >= pfn_offset && pfn < max_mapnr;
 }
 
 #elif defined(CONFIG_SPARSEMEM)
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index 98c31e5d9579..8c16fb7b8fdb 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -102,7 +102,6 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
 #include <linux/scatterlist.h>
 #include <linux/string.h>
 #include <asm/io.h>
-#include <asm-generic/pci-bridge.h>
 
 struct pci_dev;
 
@@ -125,9 +124,6 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 
 #endif /* __KERNEL__ */
 
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
 /* Do platform specific device initialization at pci_enable_device() time */
 extern int pcibios_plat_dev_init(struct pci_dev *dev);
 
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index 8d7a63b52ac7..3206245d1ed6 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -269,16 +269,16 @@ typedef struct bridge_err_cmdword_s {
 	union {
 		u32		cmd_word;
 		struct {
-			u32	didn:4,		/* Destination ID */
-				sidn:4,		/* Source ID	  */
-				pactyp:4,	/* Packet type	  */
-				tnum:5,		/* Trans Number	  */
-				coh:1,		/* Coh Transacti  */
-				ds:2,		/* Data size	  */
-				gbr:1,		/* GBR enable	  */
-				vbpm:1,		/* VBPM message	  */
+			u32	didn:4,		/* Destination ID  */
+				sidn:4,		/* Source ID	   */
+				pactyp:4,	/* Packet type	   */
+				tnum:5,		/* Trans Number	   */
+				coh:1,		/* Coh Transaction */
+				ds:2,		/* Data size	   */
+				gbr:1,		/* GBR enable	   */
+				vbpm:1,		/* VBPM message	   */
 				error:1,	/* Error occurred  */
-				barr:1,		/* Barrier op	  */
+				barr:1,		/* Barrier op	   */
 				rsvd:8;
 		} berr_st;
 	} berr_un;
diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h
index ff7ad91c85db..97b313882678 100644
--- a/arch/mips/include/asm/pgtable-bits.h
+++ b/arch/mips/include/asm/pgtable-bits.h
@@ -131,14 +131,12 @@
 /* Huge TLB page */
 #define _PAGE_HUGE_SHIFT	(_PAGE_MODIFIED_SHIFT + 1)
 #define _PAGE_HUGE		(1 << _PAGE_HUGE_SHIFT)
-#define _PAGE_SPLITTING_SHIFT	(_PAGE_HUGE_SHIFT + 1)
-#define _PAGE_SPLITTING		(1 << _PAGE_SPLITTING_SHIFT)
 #endif	/* CONFIG_64BIT && CONFIG_MIPS_HUGE_TLB_SUPPORT */
 
 #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 /* XI - page cannot be executed */
-#ifdef _PAGE_SPLITTING_SHIFT
-#define _PAGE_NO_EXEC_SHIFT	(_PAGE_SPLITTING_SHIFT + 1)
+#ifdef _PAGE_HUGE_SHIFT
+#define _PAGE_NO_EXEC_SHIFT	(_PAGE_HUGE_SHIFT + 1)
 #else
 #define _PAGE_NO_EXEC_SHIFT	(_PAGE_MODIFIED_SHIFT + 1)
 #endif
@@ -153,8 +151,8 @@
 
 #if defined(_PAGE_NO_READ_SHIFT)
 #define _PAGE_GLOBAL_SHIFT	(_PAGE_NO_READ_SHIFT + 1)
-#elif defined(_PAGE_SPLITTING_SHIFT)
-#define _PAGE_GLOBAL_SHIFT	(_PAGE_SPLITTING_SHIFT + 1)
+#elif defined(_PAGE_HUGE_SHIFT)
+#define _PAGE_GLOBAL_SHIFT	(_PAGE_HUGE_SHIFT + 1)
 #else
 #define _PAGE_GLOBAL_SHIFT	(_PAGE_MODIFIED_SHIFT + 1)
 #endif
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 8957f15e21ec..9a4fe0133ff1 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -353,7 +353,7 @@ static inline pte_t pte_mkdirty(pte_t pte)
 static inline pte_t pte_mkyoung(pte_t pte)
 {
 	pte_val(pte) |= _PAGE_ACCESSED;
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	if (!(pte_val(pte) & _PAGE_NO_READ))
 		pte_val(pte) |= _PAGE_SILENT_READ;
 	else
@@ -482,27 +482,9 @@ static inline pmd_t pmd_mkhuge(pmd_t pmd)
 	return pmd;
 }
 
-static inline int pmd_trans_splitting(pmd_t pmd)
-{
-	return !!(pmd_val(pmd) & _PAGE_SPLITTING);
-}
-
-static inline pmd_t pmd_mksplitting(pmd_t pmd)
-{
-	pmd_val(pmd) |= _PAGE_SPLITTING;
-
-	return pmd;
-}
-
 extern void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 		       pmd_t *pmdp, pmd_t pmd);
 
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-/* Extern to avoid header file madness */
-extern void pmdp_splitting_flush(struct vm_area_struct *vma,
-					unsigned long address,
-					pmd_t *pmdp);
-
 #define __HAVE_ARCH_PMD_WRITE
 static inline int pmd_write(pmd_t pmd)
 {
@@ -560,7 +542,7 @@ static inline pmd_t pmd_mkyoung(pmd_t pmd)
 {
 	pmd_val(pmd) |= _PAGE_ACCESSED;
 
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	if (!(pmd_val(pmd) & _PAGE_NO_READ))
 		pmd_val(pmd) |= _PAGE_SILENT_READ;
 	else
diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 59ee6dcf6eed..041153f5cf93 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -36,12 +36,6 @@ extern unsigned int vced_count, vcei_count;
  */
 #define HAVE_ARCH_PICK_MMAP_LAYOUT 1
 
-/*
- * A special page (the vdso) is mapped into all processes at the very
- * top of the virtual memory space.
- */
-#define SPECIAL_PAGES_SIZE PAGE_SIZE
-
 #ifdef CONFIG_32BIT
 #ifdef CONFIG_KVM_GUEST
 /* User space process size is limited to 1GB in KVM Guest Mode */
@@ -51,7 +45,7 @@ extern unsigned int vced_count, vcei_count;
  * User space process size: 2GB. This is hardcoded into a few places,
  * so don't change it unless you know what you are doing.
  */
-#define TASK_SIZE	0x7fff8000UL
+#define TASK_SIZE	0x80000000UL
 #endif
 
 #define STACK_TOP_MAX	TASK_SIZE
@@ -80,7 +74,7 @@ extern unsigned int vced_count, vcei_count;
 
 #endif
 
-#define STACK_TOP	((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE)
+#define STACK_TOP	(TASK_SIZE & PAGE_MASK)
 
 /*
  * This decides where the kernel will search for a free chunk of vm
diff --git a/arch/mips/include/asm/sgi/hpc3.h b/arch/mips/include/asm/sgi/hpc3.h
index 59920b345942..4a9c99050c13 100644
--- a/arch/mips/include/asm/sgi/hpc3.h
+++ b/arch/mips/include/asm/sgi/hpc3.h
@@ -147,7 +147,7 @@ struct hpc3_ethregs {
 #define HPC3_EPCFG_P1	 0x000f /* Cycles to spend in P1 state for PIO */
 #define HPC3_EPCFG_P2	 0x00f0 /* Cycles to spend in P2 state for PIO */
 #define HPC3_EPCFG_P3	 0x0f00 /* Cycles to spend in P3 state for PIO */
-#define HPC3_EPCFG_TST	 0x1000 /* Diagnistic ram test feature bit */
+#define HPC3_EPCFG_TST	 0x1000 /* Diagnostic ram test feature bit */
 
 	u32 _unused2[0x1000/4 - 8];	/* padding */
 
diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h
index 26ddfff28c8e..105a9479ac5f 100644
--- a/arch/mips/include/asm/sgiarcs.h
+++ b/arch/mips/include/asm/sgiarcs.h
@@ -144,7 +144,7 @@ struct linux_tinfo {
 struct linux_vdirent {
 	ULONG namelen;
 	unsigned char attr;
-	char fname[32]; /* XXX imperical, should be a define */
+	char fname[32]; /* XXX empirical, should be a define */
 };
 
 /* Other stuff for files. */
@@ -179,7 +179,7 @@ struct linux_finfo {
 	enum linux_devtypes   dtype;
 	unsigned long	      namelen;
 	unsigned char	      attr;
-	char		      name[32]; /* XXX imperical, should be define */
+	char		      name[32]; /* XXX empirical, should be define */
 };
 
 /* This describes the vector containing function pointers to the ARC
diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h
index 6ba1fb8b11e2..db7c322f057f 100644
--- a/arch/mips/include/asm/smp-ops.h
+++ b/arch/mips/include/asm/smp-ops.h
@@ -44,8 +44,9 @@ static inline void plat_smp_setup(void)
 	mp_ops->smp_setup();
 }
 
-extern void gic_send_ipi_single(int cpu, unsigned int action);
-extern void gic_send_ipi_mask(const struct cpumask *mask, unsigned int action);
+extern void mips_smp_send_ipi_single(int cpu, unsigned int action);
+extern void mips_smp_send_ipi_mask(const struct cpumask *mask,
+				      unsigned int action);
 
 #else /* !CONFIG_SMP */
 
diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h
index e33f0363235b..feb385180f87 100644
--- a/arch/mips/include/asm/sn/ioc3.h
+++ b/arch/mips/include/asm/sn/ioc3.h
@@ -355,7 +355,7 @@ struct ioc3_etxd {
 #define SSCR_PAUSE_STATE 0x40000000	/* sets when PAUSE takes effect */
 #define SSCR_RESET	0x80000000	/* reset DMA channels */
 
-/* all producer/comsumer pointers are the same bitfield */
+/* all producer/consumer pointers are the same bitfield */
 #define PROD_CONS_PTR_4K 0x00000ff8	/* for 4K buffers */
 #define PROD_CONS_PTR_1K 0x000003f8	/* for 1K buffers */
 #define PROD_CONS_PTR_OFF 3
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index 5998b13e9764..57ece90f8cf1 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -628,7 +628,7 @@ typedef union h1_icrbb_u {
 /*
  * Values for field imsgtype
  */
-#define IIO_ICRB_IMSGT_XTALK	0	/* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_XTALK	0	/* Incoming Message from Xtalk */
 #define IIO_ICRB_IMSGT_BTE	1	/* Incoming message from BTE	*/
 #define IIO_ICRB_IMSGT_SN0NET	2	/* Incoming message from SN0 net */
 #define IIO_ICRB_IMSGT_CRB	3	/* Incoming message from CRB ???  */
diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index a71da576883c..eebf39549606 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -289,7 +289,7 @@
 		.set	reorder
 		.set	noat
 		mfc0	a0, CP0_STATUS
-		li	v1, 0xff00
+		li	v1, ST0_CU1 | ST0_IM
 		ori	a0, STATMASK
 		xori	a0, STATMASK
 		mtc0	a0, CP0_STATUS
@@ -330,7 +330,7 @@
 		ori	a0, STATMASK
 		xori	a0, STATMASK
 		mtc0	a0, CP0_STATUS
-		li	v1, 0xff00
+		li	v1, ST0_CU1 | ST0_FR | ST0_IM
 		and	a0, v1
 		LONG_L	v0, PT_STATUS(sp)
 		nor	v1, $0, v1
diff --git a/arch/mips/include/asm/syscall.h b/arch/mips/include/asm/syscall.h
index 6499d93ae68d..47bc45a67e9b 100644
--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@@ -101,10 +101,8 @@ static inline void syscall_get_arguments(struct task_struct *task,
 	/* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */
 	if ((config_enabled(CONFIG_32BIT) ||
 	    test_tsk_thread_flag(task, TIF_32BIT_REGS)) &&
-	    (regs->regs[2] == __NR_syscall)) {
+	    (regs->regs[2] == __NR_syscall))
 		i++;
-		n++;
-	}
 
 	while (n--)
 		ret |= mips_get_syscall_arg(args++, task, regs, i++);
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 5305d694ffe5..7f109d4f64a4 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -95,7 +95,7 @@ static inline bool eva_kernel_access(void)
 }
 
 /*
- * Is a address valid? This does a straighforward calculation rather
+ * Is a address valid? This does a straightforward calculation rather
  * than tests.
  *
  * Address valid if:
@@ -599,7 +599,7 @@ extern void __put_user_unknown(void);
  * On error, the variable @x is set to zero.
  */
 #define __get_user_unaligned(x,ptr) \
-	__get_user__unalignednocheck((x),(ptr),sizeof(*(ptr)))
+	__get_user_unaligned_nocheck((x),(ptr),sizeof(*(ptr)))
 
 /*
  * Yuck.  We need two variants, one for 64bit operation and one
@@ -620,8 +620,8 @@ extern void __get_user_unaligned_unknown(void);
 do {									\
 	switch (size) {							\
 	case 1: __get_data_asm(val, "lb", ptr); break;			\
-	case 2: __get_user_unaligned_asm(val, "ulh", ptr); break;	\
-	case 4: __get_user_unaligned_asm(val, "ulw", ptr); break;	\
+	case 2: __get_data_unaligned_asm(val, "ulh", ptr); break;	\
+	case 4: __get_data_unaligned_asm(val, "ulw", ptr); break;	\
 	case 8: __GET_USER_UNALIGNED_DW(val, ptr); break;		\
 	default: __get_user_unaligned_unknown(); break;			\
 	}								\
@@ -1122,9 +1122,15 @@ extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	might_fault();							\
-	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
-					   __cu_len);			\
+	if (eva_kernel_access()) {					\
+		__cu_len = __invoke_copy_from_kernel(__cu_to,		\
+						     __cu_from,		\
+						     __cu_len);		\
+	} else {							\
+		might_fault();						\
+		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
+						   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -1229,16 +1235,28 @@ __clear_user(void __user *addr, __kernel_size_t size)
 {
 	__kernel_size_t res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		"move\t$5, $0\n\t"
-		"move\t$6, %2\n\t"
-		__MODULE_JAL(__bzero)
-		"move\t%0, $6"
-		: "=r" (res)
-		: "r" (addr), "r" (size)
-		: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	if (eva_kernel_access()) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, $0\n\t"
+			"move\t$6, %2\n\t"
+			__MODULE_JAL(__bzero_kernel)
+			"move\t%0, $6"
+			: "=r" (res)
+			: "r" (addr), "r" (size)
+			: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, $0\n\t"
+			"move\t$6, %2\n\t"
+			__MODULE_JAL(__bzero)
+			"move\t%0, $6"
+			: "=r" (res)
+			: "r" (addr), "r" (size)
+			: "$4", "$5", "$6", __UA_t0, __UA_t1, "$31");
+	}
 
 	return res;
 }
@@ -1384,7 +1402,7 @@ static inline long strlen_user(const char __user *s)
 		might_fault();
 		__asm__ __volatile__(
 			"move\t$4, %1\n\t"
-			__MODULE_JAL(__strlen_kernel_asm)
+			__MODULE_JAL(__strlen_user_asm)
 			"move\t%0, $2"
 			: "=r" (res)
 			: "r" (s)
diff --git a/arch/mips/include/asm/vdso.h b/arch/mips/include/asm/vdso.h
index cca56aa40ff4..8f4ca5dd992b 100644
--- a/arch/mips/include/asm/vdso.h
+++ b/arch/mips/include/asm/vdso.h
@@ -1,29 +1,136 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
  *
- * Copyright (C) 2009 Cavium Networks
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
 
 #ifndef __ASM_VDSO_H
 #define __ASM_VDSO_H
 
-#include <linux/types.h>
+#include <linux/mm_types.h>
 
+#include <asm/barrier.h>
 
-#ifdef CONFIG_32BIT
-struct mips_vdso {
-	u32 signal_trampoline[2];
-	u32 rt_signal_trampoline[2];
+/**
+ * struct mips_vdso_image - Details of a VDSO image.
+ * @data: Pointer to VDSO image data (page-aligned).
+ * @size: Size of the VDSO image data (page-aligned).
+ * @off_sigreturn: Offset of the sigreturn() trampoline.
+ * @off_rt_sigreturn: Offset of the rt_sigreturn() trampoline.
+ * @mapping: Special mapping structure.
+ *
+ * This structure contains details of a VDSO image, including the image data
+ * and offsets of certain symbols required by the kernel. It is generated as
+ * part of the VDSO build process, aside from the mapping page array, which is
+ * populated at runtime.
+ */
+struct mips_vdso_image {
+	void *data;
+	unsigned long size;
+
+	unsigned long off_sigreturn;
+	unsigned long off_rt_sigreturn;
+
+	struct vm_special_mapping mapping;
 };
-#else  /* !CONFIG_32BIT */
-struct mips_vdso {
-	u32 o32_signal_trampoline[2];
-	u32 o32_rt_signal_trampoline[2];
-	u32 rt_signal_trampoline[2];
-	u32 n32_rt_signal_trampoline[2];
+
+/*
+ * The following structures are auto-generated as part of the build for each
+ * ABI by genvdso, see arch/mips/vdso/Makefile.
+ */
+
+extern struct mips_vdso_image vdso_image;
+
+#ifdef CONFIG_MIPS32_O32
+extern struct mips_vdso_image vdso_image_o32;
+#endif
+
+#ifdef CONFIG_MIPS32_N32
+extern struct mips_vdso_image vdso_image_n32;
+#endif
+
+/**
+ * union mips_vdso_data - Data provided by the kernel for the VDSO.
+ * @xtime_sec:		Current real time (seconds part).
+ * @xtime_nsec:		Current real time (nanoseconds part, shifted).
+ * @wall_to_mono_sec:	Wall-to-monotonic offset (seconds part).
+ * @wall_to_mono_nsec:	Wall-to-monotonic offset (nanoseconds part).
+ * @seq_count:		Counter to synchronise updates (odd = updating).
+ * @cs_shift:		Clocksource shift value.
+ * @clock_mode:		Clocksource to use for time functions.
+ * @cs_mult:		Clocksource multiplier value.
+ * @cs_cycle_last:	Clock cycle value at last update.
+ * @cs_mask:		Clocksource mask value.
+ * @tz_minuteswest:	Minutes west of Greenwich (from timezone).
+ * @tz_dsttime:		Type of DST correction (from timezone).
+ *
+ * This structure contains data needed by functions within the VDSO. It is
+ * populated by the kernel and mapped read-only into user memory. The time
+ * fields are mirrors of internal data from the timekeeping infrastructure.
+ *
+ * Note: Care should be taken when modifying as the layout must remain the same
+ * for both 64- and 32-bit (for 32-bit userland on 64-bit kernel).
+ */
+union mips_vdso_data {
+	struct {
+		u64 xtime_sec;
+		u64 xtime_nsec;
+		u32 wall_to_mono_sec;
+		u32 wall_to_mono_nsec;
+		u32 seq_count;
+		u32 cs_shift;
+		u8 clock_mode;
+		u32 cs_mult;
+		u64 cs_cycle_last;
+		u64 cs_mask;
+		s32 tz_minuteswest;
+		s32 tz_dsttime;
+	};
+
+	u8 page[PAGE_SIZE];
 };
-#endif /* CONFIG_32BIT */
+
+static inline u32 vdso_data_read_begin(const union mips_vdso_data *data)
+{
+	u32 seq;
+
+	while (true) {
+		seq = ACCESS_ONCE(data->seq_count);
+		if (likely(!(seq & 1))) {
+			/* Paired with smp_wmb() in vdso_data_write_*(). */
+			smp_rmb();
+			return seq;
+		}
+
+		cpu_relax();
+	}
+}
+
+static inline bool vdso_data_read_retry(const union mips_vdso_data *data,
+					u32 start_seq)
+{
+	/* Paired with smp_wmb() in vdso_data_write_*(). */
+	smp_rmb();
+	return unlikely(data->seq_count != start_seq);
+}
+
+static inline void vdso_data_write_begin(union mips_vdso_data *data)
+{
+	++data->seq_count;
+
+	/* Ensure sequence update is written before other data page values. */
+	smp_wmb();
+}
+
+static inline void vdso_data_write_end(union mips_vdso_data *data)
+{
+	/* Ensure data values are written before updating sequence again. */
+	smp_wmb();
+	++data->seq_count;
+}
 
 #endif /* __ASM_VDSO_H */
diff --git a/arch/mips/include/uapi/asm/Kbuild b/arch/mips/include/uapi/asm/Kbuild
index 96fe7395ed8d..f2cf41461146 100644
--- a/arch/mips/include/uapi/asm/Kbuild
+++ b/arch/mips/include/uapi/asm/Kbuild
@@ -1,9 +1,9 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
-generic-y += auxvec.h
 generic-y += ipcbuf.h
 
+header-y += auxvec.h
 header-y += bitfield.h
 header-y += bitsperlong.h
 header-y += break.h
diff --git a/arch/mips/include/uapi/asm/auxvec.h b/arch/mips/include/uapi/asm/auxvec.h
new file mode 100644
index 000000000000..c9c7195272c4
--- /dev/null
+++ b/arch/mips/include/uapi/asm/auxvec.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_AUXVEC_H
+#define __ASM_AUXVEC_H
+
+/* Location of VDSO image. */
+#define AT_SYSINFO_EHDR		33
+
+#endif /* __ASM_AUXVEC_H */
diff --git a/arch/mips/include/uapi/asm/inst.h b/arch/mips/include/uapi/asm/inst.h
index 9b44d5a816fa..ddea53e3a9bb 100644
--- a/arch/mips/include/uapi/asm/inst.h
+++ b/arch/mips/include/uapi/asm/inst.h
@@ -116,7 +116,8 @@ enum cop_op {
 	dmtc_op	      = 0x05, ctc_op	    = 0x06,
 	mthc0_op      = 0x06, mthc_op	    = 0x07,
 	bc_op	      = 0x08, bc1eqz_op     = 0x09,
-	bc1nez_op     = 0x0d, cop_op	    = 0x10,
+	mfmc0_op      = 0x0b, bc1nez_op     = 0x0d,
+	wrpgpr_op     = 0x0e, cop_op	    = 0x10,
 	copm_op	      = 0x18
 };
 
@@ -529,7 +530,7 @@ enum MIPS6e_i8_func {
 };
 
 /*
- * (microMIPS & MIPS16e) NOP instruction.
+ * (microMIPS) NOP instruction.
  */
 #define MM_NOP16	0x0c00
 
@@ -679,7 +680,7 @@ struct fp0_format {		/* FPU multiply and add format (MIPS32) */
 	;))))))
 };
 
-struct mm_fp0_format {		/* FPU multipy and add format (microMIPS) */
+struct mm_fp0_format {		/* FPU multiply and add format (microMIPS) */
 	__BITFIELD_FIELD(unsigned int opcode : 6,
 	__BITFIELD_FIELD(unsigned int ft : 5,
 	__BITFIELD_FIELD(unsigned int fs : 5,
@@ -799,6 +800,13 @@ struct mm_x_format {		/* Scaled indexed load format (microMIPS) */
 	;)))))
 };
 
+struct mm_a_format {		/* ADDIUPC format (microMIPS) */
+	__BITFIELD_FIELD(unsigned int opcode : 6,
+	__BITFIELD_FIELD(unsigned int rs : 3,
+	__BITFIELD_FIELD(signed int simmediate : 23,
+	;)))
+};
+
 /*
  * microMIPS instruction formats (16-bit length)
  */
@@ -940,6 +948,7 @@ union mips_instruction {
 	struct mm_i_format mm_i_format;
 	struct mm_m_format mm_m_format;
 	struct mm_x_format mm_x_format;
+	struct mm_a_format mm_a_format;
 	struct mm_b0_format mm_b0_format;
 	struct mm_b1_format mm_b1_format;
 	struct mm16_m_format mm16_m_format ;
diff --git a/arch/mips/include/uapi/asm/mman.h b/arch/mips/include/uapi/asm/mman.h
index 97c03f468924..ccdcfcbb24aa 100644
--- a/arch/mips/include/uapi/asm/mman.h
+++ b/arch/mips/include/uapi/asm/mman.h
@@ -75,6 +75,7 @@
 #define MADV_DONTNEED	4		/* don't need these pages */
 
 /* common parameters: try to keep these consistent across architectures */
+#define MADV_FREE	8		/* free pages only if memory pressure */
 #define MADV_REMOVE	9		/* remove these pages & resources */
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index 2cb7fdead570..cc49dc240d67 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -86,10 +86,15 @@ typedef struct siginfo {
 			int _trapno;	/* TRAP # which caused the signal */
 #endif
 			short _addr_lsb;
-			struct {
-				void __user *_lower;
-				void __user *_upper;
-			} _addr_bnd;
+			union {
+				/* used when si_code=SEGV_BNDERR */
+				struct {
+					void __user *_lower;
+					void __user *_upper;
+				} _addr_bnd;
+				/* used when si_code=SEGV_PKUERR */
+				__u32 _pkey;
+			};
 		} _sigfault;
 
 		/* SIGPOLL, SIGXFSZ (To do ...)	 */
diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h
index dec3c850f36b..2027240aafbb 100644
--- a/arch/mips/include/uapi/asm/socket.h
+++ b/arch/mips/include/uapi/asm/socket.h
@@ -103,4 +103,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _UAPI_ASM_SOCKET_H */
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index cfabadb135d9..24ad815c7f38 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -379,16 +379,20 @@
 #define __NR_execveat			(__NR_Linux + 356)
 #define __NR_userfaultfd		(__NR_Linux + 357)
 #define __NR_membarrier			(__NR_Linux + 358)
+#define __NR_mlock2			(__NR_Linux + 359)
+#define __NR_copy_file_range		(__NR_Linux + 360)
+#define __NR_preadv2			(__NR_Linux + 361)
+#define __NR_pwritev2			(__NR_Linux + 362)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		358
+#define __NR_Linux_syscalls		362
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		358
+#define __NR_O32_Linux_syscalls		362
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -715,16 +719,20 @@
 #define __NR_execveat			(__NR_Linux + 316)
 #define __NR_userfaultfd		(__NR_Linux + 317)
 #define __NR_membarrier			(__NR_Linux + 318)
+#define __NR_mlock2			(__NR_Linux + 319)
+#define __NR_copy_file_range		(__NR_Linux + 320)
+#define __NR_preadv2			(__NR_Linux + 321)
+#define __NR_pwritev2			(__NR_Linux + 322)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		318
+#define __NR_Linux_syscalls		322
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		318
+#define __NR_64_Linux_syscalls		322
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -1055,15 +1063,19 @@
 #define __NR_execveat			(__NR_Linux + 320)
 #define __NR_userfaultfd		(__NR_Linux + 321)
 #define __NR_membarrier			(__NR_Linux + 322)
+#define __NR_mlock2			(__NR_Linux + 323)
+#define __NR_copy_file_range		(__NR_Linux + 324)
+#define __NR_preadv2			(__NR_Linux + 325)
+#define __NR_pwritev2			(__NR_Linux + 326)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		322
+#define __NR_Linux_syscalls		326
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		322
+#define __NR_N32_Linux_syscalls		326
 
 #endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 459cb017306c..934b15b5b575 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -25,6 +25,7 @@
 #include <linux/power_supply.h>
 #include <linux/power/jz4740-battery.h>
 #include <linux/power/gpio-charger.h>
+#include <linux/pwm.h>
 
 #include <asm/mach-jz4740/gpio.h>
 #include <asm/mach-jz4740/jz4740_fb.h>
@@ -34,8 +35,6 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
-#include <linux/leds_pwm.h>
-
 #include <asm/mach-jz4740/platform.h>
 
 #include "clock.h"
@@ -399,13 +398,15 @@ static struct platform_device avt2_usb_regulator_device = {
 	}
 };
 
+static struct pwm_lookup qi_lb60_pwm_lookup[] = {
+	PWM_LOOKUP("jz4740-pwm", 4, "pwm-beeper", NULL, 0,
+		   PWM_POLARITY_NORMAL),
+};
+
 /* beeper */
 static struct platform_device qi_lb60_pwm_beeper = {
 	.name = "pwm-beeper",
 	.id = -1,
-	.dev = {
-		.platform_data = (void *)4,
-	},
 };
 
 /* charger */
@@ -491,6 +492,8 @@ static int __init qi_lb60_init_platform_devices(void)
 		platform_device_register(&jz4740_usb_ohci_device);
 	}
 
+	pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup));
+
 	return platform_add_devices(jz_platform_devices,
 					ARRAY_SIZE(jz_platform_devices));
 
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 8c6d76c9b2d6..b765773ab8aa 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -18,6 +18,8 @@
 #include <linux/init.h>
 
 #include <linux/io.h>
+#include <linux/gpio/driver.h>
+/* FIXME: needed for gpio_request(), try to remove consumer API from driver */
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
@@ -91,9 +93,9 @@ static inline struct jz_gpio_chip *gpio_to_jz_gpio_chip(unsigned int gpio)
 	return &jz4740_gpio_chips[gpio >> 5];
 }
 
-static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *gpio_chip)
+static inline struct jz_gpio_chip *gpio_chip_to_jz_gpio_chip(struct gpio_chip *gc)
 {
-	return container_of(gpio_chip, struct jz_gpio_chip, gpio_chip);
+	return gpiochip_get_data(gc);
 }
 
 static inline struct jz_gpio_chip *irq_to_jz_gpio_chip(struct irq_data *data)
@@ -234,7 +236,7 @@ static int jz_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 
 static int jz_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
 {
-	struct jz_gpio_chip *jz_gpio = gpio_chip_to_jz_gpio_chip(chip);
+	struct jz_gpio_chip *jz_gpio = gpiochip_get_data(chip);
 
 	return jz_gpio->irq_base + gpio;
 }
@@ -270,7 +272,7 @@ uint32_t jz_gpio_port_get_value(int port, uint32_t mask)
 }
 EXPORT_SYMBOL(jz_gpio_port_get_value);
 
-#define IRQ_TO_BIT(irq) BIT(irq_to_gpio(irq) & 0x1f)
+#define IRQ_TO_BIT(irq) BIT((irq - JZ4740_IRQ_GPIO(0)) & 0x1f)
 
 static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq)
 {
@@ -449,7 +451,7 @@ static void jz4740_gpio_chip_init(struct jz_gpio_chip *chip, unsigned int id)
 	irq_setup_generic_chip(gc, IRQ_MSK(chip->gpio_chip.ngpio),
 		IRQ_GC_INIT_NESTED_LOCK, 0, IRQ_NOPROBE | IRQ_LEVEL);
 
-	gpiochip_add(&chip->gpio_chip);
+	gpiochip_add_data(&chip->gpio_chip, chip);
 }
 
 static int __init jz4740_gpio_init(void)
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index d982be1ea1c3..b0988fd62fcc 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
 obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
-obj-$(CONFIG_MIPS_GIC_IPI)	+= smp-gic.o
+obj-$(CONFIG_MIPS_CPS_NS16550)	+= cps-vec-ns16550.o
 obj-$(CONFIG_MIPS_SPRAM)	+= spram.o
 
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 1188e00bb120..1b992c6e3d8e 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -35,7 +35,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 	int __res = 1;							\
 	struct elfhdr *__h = (hdr);					\
 									\
-	if (__h->e_machine != EM_MIPS)					\
+	if (!mips_elf_check_machine(__h))				\
 		__res = 0;						\
 	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
 		__res = 0;						\
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index 928767858b86..abd3affe5fb3 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -47,7 +47,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 	int __res = 1;							\
 	struct elfhdr *__h = (hdr);					\
 									\
-	if (__h->e_machine != EM_MIPS)					\
+	if (!mips_elf_check_machine(__h))				\
 		__res = 0;						\
 	if (__h->e_ident[EI_CLASS] != ELFCLASS32)			\
 		__res = 0;						\
diff --git a/arch/mips/kernel/cps-vec-ns16550.S b/arch/mips/kernel/cps-vec-ns16550.S
new file mode 100644
index 000000000000..6d246ad05638
--- /dev/null
+++ b/arch/mips/kernel/cps-vec-ns16550.S
@@ -0,0 +1,202 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <linux/serial_reg.h>
+
+#define UART_TX_OFS	(UART_TX << CONFIG_MIPS_CPS_NS16550_SHIFT)
+#define UART_LSR_OFS	(UART_LSR << CONFIG_MIPS_CPS_NS16550_SHIFT)
+
+/**
+ * _mips_cps_putc() - write a character to the UART
+ * @a0: ASCII character to write
+ * @t9: UART base address
+ */
+LEAF(_mips_cps_putc)
+1:	lw		t0, UART_LSR_OFS(t9)
+	andi		t0, t0, UART_LSR_TEMT
+	beqz		t0, 1b
+	sb		a0, UART_TX_OFS(t9)
+	jr		ra
+	END(_mips_cps_putc)
+
+/**
+ * _mips_cps_puts() - write a string to the UART
+ * @a0: pointer to NULL-terminated ASCII string
+ * @t9: UART base address
+ *
+ * Write a null-terminated ASCII string to the UART.
+ */
+NESTED(_mips_cps_puts, 0, ra)
+	move		s7, ra
+	move		s6, a0
+
+1:	lb		a0, 0(s6)
+	beqz		a0, 2f
+	jal		_mips_cps_putc
+	PTR_ADDIU	s6, s6, 1
+	b		1b
+
+2:	jr		s7
+	END(_mips_cps_puts)
+
+/**
+ * _mips_cps_putx4 - write a 4b hex value to the UART
+ * @a0: the 4b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a single hexadecimal character to the UART.
+ */
+NESTED(_mips_cps_putx4, 0, ra)
+	andi		a0, a0, 0xf
+	li		t0, '0'
+	blt		a0, 10, 1f
+	li		t0, 'a'
+	addiu		a0, a0, -10
+1:	addu		a0, a0, t0
+	b		_mips_cps_putc
+	END(_mips_cps_putx4)
+
+/**
+ * _mips_cps_putx8 - write an 8b hex value to the UART
+ * @a0: the 8b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write an 8 bit value (ie. 2 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx8, 0, ra)
+	move		s3, ra
+	move		s2, a0
+	srl		a0, a0, 4
+	jal		_mips_cps_putx4
+	move		a0, s2
+	move		ra, s3
+	b		_mips_cps_putx4
+	END(_mips_cps_putx8)
+
+/**
+ * _mips_cps_putx16 - write a 16b hex value to the UART
+ * @a0: the 16b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 16 bit value (ie. 4 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx16, 0, ra)
+	move		s5, ra
+	move		s4, a0
+	srl		a0, a0, 8
+	jal		_mips_cps_putx8
+	move		a0, s4
+	move		ra, s5
+	b		_mips_cps_putx8
+	END(_mips_cps_putx16)
+
+/**
+ * _mips_cps_putx32 - write a 32b hex value to the UART
+ * @a0: the 32b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 32 bit value (ie. 8 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx32, 0, ra)
+	move		s7, ra
+	move		s6, a0
+	srl		a0, a0, 16
+	jal		_mips_cps_putx16
+	move		a0, s6
+	move		ra, s7
+	b		_mips_cps_putx16
+	END(_mips_cps_putx32)
+
+#ifdef CONFIG_64BIT
+
+/**
+ * _mips_cps_putx64 - write a 64b hex value to the UART
+ * @a0: the 64b value to write to the UART
+ * @t9: UART base address
+ *
+ * Write a 64 bit value (ie. 16 hexadecimal characters) to the UART.
+ */
+NESTED(_mips_cps_putx64, 0, ra)
+	move		sp, ra
+	move		s8, a0
+	dsrl32		a0, a0, 0
+	jal		_mips_cps_putx32
+	move		a0, s8
+	move		ra, sp
+	b		_mips_cps_putx32
+	END(_mips_cps_putx64)
+
+#define _mips_cps_putxlong _mips_cps_putx64
+
+#else /* !CONFIG_64BIT */
+
+#define _mips_cps_putxlong _mips_cps_putx32
+
+#endif /* !CONFIG_64BIT */
+
+/**
+ * mips_cps_bev_dump() - dump relevant exception state to UART
+ * @a0: pointer to NULL-terminated ASCII string naming the exception
+ *
+ * Write information that may be useful in debugging an exception to the
+ * UART configured by CONFIG_MIPS_CPS_NS16550_*. As this BEV exception
+ * will only be run if something goes horribly wrong very early during
+ * the bringup of a core and it is very likely to be unsafe to perform
+ * memory accesses at that point (cache state indeterminate, EVA may not
+ * be configured, coherence may be disabled) let alone have a stack,
+ * this is all written in assembly using only registers & unmapped
+ * uncached access to the UART registers.
+ */
+LEAF(mips_cps_bev_dump)
+	move		s0, ra
+	move		s1, a0
+
+	li		t9, CKSEG1ADDR(CONFIG_MIPS_CPS_NS16550_BASE)
+
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+	PTR_LA		a0, str_bev
+	jal		_mips_cps_puts
+	move		a0, s1
+	jal		_mips_cps_puts
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+
+#define DUMP_COP0_REG(reg, name, sz, _mfc0)		\
+	PTR_LA		a0, 8f;				\
+	jal		_mips_cps_puts;			\
+	_mfc0		a0, reg;			\
+	jal		_mips_cps_putx##sz;		\
+	PTR_LA		a0, str_newline;		\
+	jal		_mips_cps_puts;			\
+	TEXT(name)
+
+	DUMP_COP0_REG(CP0_CAUSE,    "Cause:    0x", 32, mfc0)
+	DUMP_COP0_REG(CP0_STATUS,   "Status:   0x", 32, mfc0)
+	DUMP_COP0_REG(CP0_EBASE,    "EBase:    0x", long, MFC0)
+	DUMP_COP0_REG(CP0_BADVADDR, "BadVAddr: 0x", long, MFC0)
+	DUMP_COP0_REG(CP0_BADINSTR, "BadInstr: 0x", 32, mfc0)
+
+	PTR_LA		a0, str_newline
+	jal		_mips_cps_puts
+	jr		s0
+	END(mips_cps_bev_dump)
+
+.pushsection	.data
+str_bev: .asciiz "BEV Exception: "
+str_newline: .asciiz "\r\n"
+.popsection
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index 209ded16806b..ac81edd44563 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -25,14 +25,32 @@
 
 .set noreorder
 
+#ifdef CONFIG_64BIT
+# define STATUS_BITDEPS		ST0_KX
+#else
+# define STATUS_BITDEPS		0
+#endif
+
+#ifdef CONFIG_MIPS_CPS_NS16550
+
+#define DUMP_EXCEP(name)		\
+	PTR_LA	a0, 8f;			\
+	jal	mips_cps_bev_dump;	\
+	 nop;				\
+	TEXT(name)
+
+#else /* !CONFIG_MIPS_CPS_NS16550 */
+
+#define DUMP_EXCEP(name)
+
+#endif /* !CONFIG_MIPS_CPS_NS16550 */
+
 	/*
 	 * Set dest to non-zero if the core supports the MT ASE, else zero. If
 	 * MT is not supported then branch to nomt.
 	 */
 	.macro	has_mt	dest, nomt
-	mfc0	\dest, CP0_CONFIG
-	bgez	\dest, \nomt
-	 mfc0	\dest, CP0_CONFIG, 1
+	mfc0	\dest, CP0_CONFIG, 1
 	bgez	\dest, \nomt
 	 mfc0	\dest, CP0_CONFIG, 2
 	bgez	\dest, \nomt
@@ -47,11 +65,9 @@
 
 LEAF(mips_cps_core_entry)
 	/*
-	 * These first 12 bytes will be patched by cps_smp_setup to load the
-	 * base address of the CM GCRs into register v1 and the CCA to use into
-	 * register s0.
+	 * These first 4 bytes will be patched by cps_smp_setup to load the
+	 * CCA to use into register s0.
 	 */
-	.quad	0
 	.word	0
 
 	/* Check whether we're here due to an NMI */
@@ -71,7 +87,7 @@ not_nmi:
 	mtc0	t0, CP0_CAUSE
 
 	/* Setup Status */
-	li	t0, ST0_CU1 | ST0_CU0
+	li	t0, ST0_CU1 | ST0_CU0 | ST0_BEV | STATUS_BITDEPS
 	mtc0	t0, CP0_STATUS
 
 	/*
@@ -151,6 +167,12 @@ dcache_done:
 	mtc0	t0, CP0_CONFIG
 	ehb
 
+	/* Calculate an uncached address for the CM GCRs */
+	MFC0	v1, CP0_CMGCRBASE
+	PTR_SLL	v1, v1, 4
+	PTR_LI	t0, UNCAC_BASE
+	PTR_ADDU v1, v1, t0
+
 	/* Enter the coherent domain */
 	li	t0, 0xff
 	sw	t0, GCR_CL_COHERENCE_OFS(v1)
@@ -188,36 +210,42 @@ dcache_done:
 
 .org 0x200
 LEAF(excep_tlbfill)
+	DUMP_EXCEP("TLB Fill")
 	b	.
 	 nop
 	END(excep_tlbfill)
 
 .org 0x280
 LEAF(excep_xtlbfill)
+	DUMP_EXCEP("XTLB Fill")
 	b	.
 	 nop
 	END(excep_xtlbfill)
 
 .org 0x300
 LEAF(excep_cache)
+	DUMP_EXCEP("Cache")
 	b	.
 	 nop
 	END(excep_cache)
 
 .org 0x380
 LEAF(excep_genex)
+	DUMP_EXCEP("General")
 	b	.
 	 nop
 	END(excep_genex)
 
 .org 0x400
 LEAF(excep_intex)
+	DUMP_EXCEP("Interrupt")
 	b	.
 	 nop
 	END(excep_intex)
 
 .org 0x480
 LEAF(excep_ejtag)
+	DUMP_EXCEP("EJTAG")
 	PTR_LA	k0, ejtag_debug_handler
 	jr	k0
 	 nop
@@ -229,7 +257,6 @@ LEAF(mips_cps_core_init)
 	has_mt	t0, 3f
 
 	.set	push
-	.set	mips64r2
 	.set	mt
 
 	/* Only allow 1 TC per VPE to execute... */
@@ -348,7 +375,6 @@ LEAF(mips_cps_boot_vpes)
 	 nop
 
 	.set	push
-	.set	mips64r2
 	.set	mt
 
 1:	/* Enter VPE configuration state */
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 09f4034f239f..6392dbe504fb 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -190,7 +190,7 @@ static inline void check_daddi(void)
 	printk("Checking for the daddi bug... ");
 
 	local_irq_save(flags);
-	handler = set_except_vector(12, handle_daddi_ov);
+	handler = set_except_vector(EXCCODE_OV, handle_daddi_ov);
 	/*
 	 * The following code fails to trigger an overflow exception
 	 * when executed on R4000 rev. 2.2 or 3.0 (PRId 00000422 or
@@ -214,7 +214,7 @@ static inline void check_daddi(void)
 		".set	pop"
 		: "=r" (v), "=&r" (tmp)
 		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
-	set_except_vector(12, handler);
+	set_except_vector(EXCCODE_OV, handler);
 	local_irq_restore(flags);
 
 	if (daddi_ov) {
@@ -225,14 +225,14 @@ static inline void check_daddi(void)
 	printk("yes, workaround... ");
 
 	local_irq_save(flags);
-	handler = set_except_vector(12, handle_daddi_ov);
+	handler = set_except_vector(EXCCODE_OV, handle_daddi_ov);
 	asm volatile(
 		"addiu	%1, $0, %2\n\t"
 		"dsrl	%1, %1, 1\n\t"
 		"daddi	%0, %1, %3"
 		: "=r" (v), "=&r" (tmp)
 		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
-	set_except_vector(12, handler);
+	set_except_vector(EXCCODE_OV, handler);
 	local_irq_restore(flags);
 
 	if (daddi_ov) {
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 09a51d091941..b725b713b9f8 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -99,6 +99,161 @@ static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
 }
 
 /*
+ * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
+ * supported by FPU hardware.
+ */
+static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
+{
+	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+		unsigned long sr, fir, fcsr, fcsr0, fcsr1;
+
+		sr = read_c0_status();
+		__enable_fpu(FPU_AS_IS);
+
+		fir = read_32bit_cp1_register(CP1_REVISION);
+		if (fir & MIPS_FPIR_HAS2008) {
+			fcsr = read_32bit_cp1_register(CP1_STATUS);
+
+			fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+			write_32bit_cp1_register(CP1_STATUS, fcsr0);
+			fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+			fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+			write_32bit_cp1_register(CP1_STATUS, fcsr1);
+			fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+			write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+			if (!(fcsr0 & FPU_CSR_NAN2008))
+				c->options |= MIPS_CPU_NAN_LEGACY;
+			if (fcsr1 & FPU_CSR_NAN2008)
+				c->options |= MIPS_CPU_NAN_2008;
+
+			if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
+				c->fpu_msk31 &= ~FPU_CSR_ABS2008;
+			else
+				c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
+
+			if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
+				c->fpu_msk31 &= ~FPU_CSR_NAN2008;
+			else
+				c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
+		} else {
+			c->options |= MIPS_CPU_NAN_LEGACY;
+		}
+
+		write_c0_status(sr);
+	} else {
+		c->options |= MIPS_CPU_NAN_LEGACY;
+	}
+}
+
+/*
+ * IEEE 754 conformance mode to use.  Affects the NaN encoding and the
+ * ABS.fmt/NEG.fmt execution mode.
+ */
+static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT;
+
+/*
+ * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
+ * to support by the FPU emulator according to the IEEE 754 conformance
+ * mode selected.  Note that "relaxed" straps the emulator so that it
+ * allows 2008-NaN binaries even for legacy processors.
+ */
+static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
+{
+	c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
+	c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+	c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+
+	switch (ieee754) {
+	case STRICT:
+		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+				    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+				    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+			c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+		} else {
+			c->options |= MIPS_CPU_NAN_LEGACY;
+			c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		}
+		break;
+	case LEGACY:
+		c->options |= MIPS_CPU_NAN_LEGACY;
+		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		break;
+	case STD2008:
+		c->options |= MIPS_CPU_NAN_2008;
+		c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		break;
+	case RELAXED:
+		c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+		break;
+	}
+}
+
+/*
+ * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
+ * according to the "ieee754=" parameter.
+ */
+static void cpu_set_nan_2008(struct cpuinfo_mips *c)
+{
+	switch (ieee754) {
+	case STRICT:
+		mips_use_nan_legacy = !!cpu_has_nan_legacy;
+		mips_use_nan_2008 = !!cpu_has_nan_2008;
+		break;
+	case LEGACY:
+		mips_use_nan_legacy = !!cpu_has_nan_legacy;
+		mips_use_nan_2008 = !cpu_has_nan_legacy;
+		break;
+	case STD2008:
+		mips_use_nan_legacy = !cpu_has_nan_2008;
+		mips_use_nan_2008 = !!cpu_has_nan_2008;
+		break;
+	case RELAXED:
+		mips_use_nan_legacy = true;
+		mips_use_nan_2008 = true;
+		break;
+	}
+}
+
+/*
+ * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
+ * settings:
+ *
+ * strict:  accept binaries that request a NaN encoding supported by the FPU
+ * legacy:  only accept legacy-NaN binaries
+ * 2008:    only accept 2008-NaN binaries
+ * relaxed: accept any binaries regardless of whether supported by the FPU
+ */
+static int __init ieee754_setup(char *s)
+{
+	if (!s)
+		return -1;
+	else if (!strcmp(s, "strict"))
+		ieee754 = STRICT;
+	else if (!strcmp(s, "legacy"))
+		ieee754 = LEGACY;
+	else if (!strcmp(s, "2008"))
+		ieee754 = STD2008;
+	else if (!strcmp(s, "relaxed"))
+		ieee754 = RELAXED;
+	else
+		return -1;
+
+	if (!(boot_cpu_data.options & MIPS_CPU_FPU))
+		cpu_set_nofpu_2008(&boot_cpu_data);
+	cpu_set_nan_2008(&boot_cpu_data);
+
+	return 0;
+}
+
+early_param("ieee754", ieee754_setup);
+
+/*
  * Set the FIR feature flags for the FPU emulator.
  */
 static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
@@ -113,6 +268,8 @@ static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
 	if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
 			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
 		value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
+	if (c->options & MIPS_CPU_NAN_2008)
+		value |= MIPS_FPIR_HAS2008;
 	c->fpu_id = value;
 }
 
@@ -137,6 +294,8 @@ static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
 	}
 
 	cpu_set_fpu_fcsr_mask(c);
+	cpu_set_fpu_2008(c);
+	cpu_set_nan_2008(c);
 }
 
 /*
@@ -147,6 +306,8 @@ static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
 	c->options &= ~MIPS_CPU_FPU;
 	c->fpu_msk31 = mips_nofpu_msk31;
 
+	cpu_set_nofpu_2008(c);
+	cpu_set_nan_2008(c);
 	cpu_set_nofpu_id(c);
 }
 
@@ -536,8 +697,7 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 		c->options |= MIPS_CPU_SEGMENTS;
 	if (config3 & MIPS_CONF3_MSA)
 		c->ases |= MIPS_ASE_MSA;
-	/* Only tested on 32-bit cores */
-	if ((config3 & MIPS_CONF3_PW) && config_enabled(CONFIG_32BIT)) {
+	if (config3 & MIPS_CONF3_PW) {
 		c->htw_seq = 0;
 		c->options |= MIPS_CPU_HTW;
 	}
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index e5ed7ada1433..1f910563fdf6 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -28,6 +28,43 @@ static u64 notrace r4k_read_sched_clock(void)
 	return read_c0_count();
 }
 
+static inline unsigned int rdhwr_count(void)
+{
+	unsigned int count;
+
+	__asm__ __volatile__(
+	"	.set push\n"
+	"	.set mips32r2\n"
+	"	rdhwr	%0, $2\n"
+	"	.set pop\n"
+	: "=r" (count));
+
+	return count;
+}
+
+static bool rdhwr_count_usable(void)
+{
+	unsigned int prev, curr, i;
+
+	/*
+	 * Older QEMUs have a broken implementation of RDHWR for the CP0 count
+	 * which always returns a constant value. Try to identify this and don't
+	 * use it in the VDSO if it is broken. This workaround can be removed
+	 * once the fix has been in QEMU stable for a reasonable amount of time.
+	 */
+	for (i = 0, prev = rdhwr_count(); i < 100; i++) {
+		curr = rdhwr_count();
+
+		if (curr != prev)
+			return true;
+
+		prev = curr;
+	}
+
+	pr_warn("Not using R4K clocksource in VDSO due to broken RDHWR\n");
+	return false;
+}
+
 int __init init_r4k_clocksource(void)
 {
 	if (!cpu_has_counter || !mips_hpt_frequency)
@@ -36,6 +73,13 @@ int __init init_r4k_clocksource(void)
 	/* Calculate a somewhat reasonable rating value */
 	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
+	/*
+	 * R2 onwards makes the count accessible to user mode so it can be used
+	 * by the VDSO (HWREna is configured by configure_hwrena()).
+	 */
+	if (cpu_has_mips_r2_r6 && rdhwr_count_usable())
+		clocksource_mips.archdata.vdso_clock_mode = VDSO_CLOCK_R4K;
+
 	clocksource_register_hz(&clocksource_mips, mips_hpt_frequency);
 
 	sched_clock_register(r4k_read_sched_clock, 32, mips_hpt_frequency);
diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c
index 4a4d9e067c89..c3c234dc0c07 100644
--- a/arch/mips/kernel/elf.c
+++ b/arch/mips/kernel/elf.c
@@ -11,6 +11,12 @@
 #include <linux/elf.h>
 #include <linux/sched.h>
 
+#include <asm/cpu-info.h>
+
+/* Whether to accept legacy-NaN and 2008-NaN user binaries.  */
+bool mips_use_nan_legacy;
+bool mips_use_nan_2008;
+
 /* FPU modes */
 enum {
 	FP_FRE,
@@ -68,15 +74,23 @@ static struct mode_req none_req = { true, true, false, true, true };
 int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
 		     bool is_interp, struct arch_elf_state *state)
 {
-	struct elf32_hdr *ehdr32 = _ehdr;
+	union {
+		struct elf32_hdr e32;
+		struct elf64_hdr e64;
+	} *ehdr = _ehdr;
 	struct elf32_phdr *phdr32 = _phdr;
 	struct elf64_phdr *phdr64 = _phdr;
 	struct mips_elf_abiflags_v0 abiflags;
+	bool elf32;
+	u32 flags;
 	int ret;
 
+	elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
+	flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;
+
 	/* Lets see if this is an O32 ELF */
-	if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) {
-		if (ehdr32->e_flags & EF_MIPS_FP64) {
+	if (elf32) {
+		if (flags & EF_MIPS_FP64) {
 			/*
 			 * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it
 			 * later if needed
@@ -120,13 +134,50 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
 	return 0;
 }
 
-int arch_check_elf(void *_ehdr, bool has_interpreter,
+int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
 		   struct arch_elf_state *state)
 {
-	struct elf32_hdr *ehdr = _ehdr;
+	union {
+		struct elf32_hdr e32;
+		struct elf64_hdr e64;
+	} *ehdr = _ehdr;
+	union {
+		struct elf32_hdr e32;
+		struct elf64_hdr e64;
+	} *iehdr = _interp_ehdr;
 	struct mode_req prog_req, interp_req;
 	int fp_abi, interp_fp_abi, abi0, abi1, max_abi;
-	bool is_mips64;
+	bool elf32;
+	u32 flags;
+
+	elf32 = ehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
+	flags = elf32 ? ehdr->e32.e_flags : ehdr->e64.e_flags;
+
+	/*
+	 * Determine the NaN personality, reject the binary if not allowed.
+	 * Also ensure that any interpreter matches the executable.
+	 */
+	if (flags & EF_MIPS_NAN2008) {
+		if (mips_use_nan_2008)
+			state->nan_2008 = 1;
+		else
+			return -ENOEXEC;
+	} else {
+		if (mips_use_nan_legacy)
+			state->nan_2008 = 0;
+		else
+			return -ENOEXEC;
+	}
+	if (has_interpreter) {
+		bool ielf32;
+		u32 iflags;
+
+		ielf32 = iehdr->e32.e_ident[EI_CLASS] == ELFCLASS32;
+		iflags = ielf32 ? iehdr->e32.e_flags : iehdr->e64.e_flags;
+
+		if ((flags ^ iflags) & EF_MIPS_NAN2008)
+			return -ELIBBAD;
+	}
 
 	if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
 		return 0;
@@ -142,21 +193,18 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
 		abi0 = abi1 = fp_abi;
 	}
 
-	is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) ||
-		    (ehdr->e_flags & EF_MIPS_ABI2);
+	if (elf32 && !(flags & EF_MIPS_ABI2)) {
+		/* Default to a mode capable of running code expecting FR=0 */
+		state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
 
-	if (is_mips64) {
+		/* Allow all ABIs we know about */
+		max_abi = MIPS_ABI_FP_64A;
+	} else {
 		/* MIPS64 code always uses FR=1, thus the default is easy */
 		state->overall_fp_mode = FP_FR1;
 
 		/* Disallow access to the various FPXX & FP64 ABIs */
 		max_abi = MIPS_ABI_FP_SOFT;
-	} else {
-		/* Default to a mode capable of running code expecting FR=0 */
-		state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
-
-		/* Allow all ABIs we know about */
-		max_abi = MIPS_ABI_FP_64A;
 	}
 
 	if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) ||
@@ -254,3 +302,27 @@ void mips_set_personality_fp(struct arch_elf_state *state)
 		BUG();
 	}
 }
+
+/*
+ * Select the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
+ * in FCSR according to the ELF NaN personality.
+ */
+void mips_set_personality_nan(struct arch_elf_state *state)
+{
+	struct cpuinfo_mips *c = &boot_cpu_data;
+	struct task_struct *t = current;
+
+	t->thread.fpu.fcr31 = c->fpu_csr31;
+	switch (state->nan_2008) {
+	case 0:
+		break;
+	case 1:
+		if (!(c->fpu_msk31 & FPU_CSR_NAN2008))
+			t->thread.fpu.fcr31 |= FPU_CSR_NAN2008;
+		if (!(c->fpu_msk31 & FPU_CSR_ABS2008))
+			t->thread.fpu.fcr31 |= FPU_CSR_ABS2008;
+		break;
+	default:
+		BUG();
+	}
+}
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
index c6854d9df926..cbd47f38073b 100644
--- a/arch/mips/kernel/gpio_txx9.c
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -10,7 +10,7 @@
 
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/errno.h>
 #include <linux/io.h>
 #include <asm/txx9pio.h>
@@ -21,7 +21,7 @@ static struct txx9_pio_reg __iomem *txx9_pioptr;
 
 static int txx9_gpio_get(struct gpio_chip *chip, unsigned int offset)
 {
-	return __raw_readl(&txx9_pioptr->din) & (1 << offset);
+	return !!(__raw_readl(&txx9_pioptr->din) & (1 << offset));
 }
 
 static void txx9_gpio_set_raw(unsigned int offset, int value)
@@ -85,5 +85,5 @@ int __init txx9_gpio_init(unsigned long baseaddr,
 		return -ENODEV;
 	txx9_gpio_chip.base = base;
 	txx9_gpio_chip.ngpio = num;
-	return gpiochip_add(&txx9_gpio_chip);
+	return gpiochip_add_data(&txx9_gpio_chip, NULL);
 }
diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index ab1478d5a4db..46794d64c0bf 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -134,6 +134,16 @@ void __init check_wait(void)
 		return;
 	}
 
+	/*
+	 * MIPSr6 specifies that masked interrupts should unblock an executing
+	 * wait instruction, and thus that it is safe for us to use
+	 * r4k_wait_irqoff. Yippee!
+	 */
+	if (cpu_has_mips_r6) {
+		cpu_wait = r4k_wait_irqoff;
+		return;
+	}
+
 	switch (current_cpu_type()) {
 	case CPU_R3081:
 	case CPU_R3081E:
@@ -155,12 +165,12 @@ void __init check_wait(void)
 	case CPU_4KEC:
 	case CPU_4KSC:
 	case CPU_5KC:
+	case CPU_5KE:
 	case CPU_25KF:
 	case CPU_PR4450:
 	case CPU_BMIPS3300:
 	case CPU_BMIPS4350:
 	case CPU_BMIPS4380:
-	case CPU_BMIPS5000:
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
@@ -171,7 +181,9 @@ void __init check_wait(void)
 	case CPU_XLP:
 		cpu_wait = r4k_wait;
 		break;
-
+	case CPU_BMIPS5000:
+		cpu_wait = r4k_wait_irqoff;
+		break;
 	case CPU_RM7000:
 		cpu_wait = rm7k_wait_irqoff;
 		break;
@@ -196,7 +208,6 @@ void __init check_wait(void)
 	case CPU_INTERAPTIV:
 	case CPU_M5150:
 	case CPU_QEMU_GENERIC:
-	case CPU_I6400:
 		cpu_wait = r4k_wait;
 		if (read_c0_config7() & MIPS_CONF7_WII)
 			cpu_wait = r4k_wait_irqoff;
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
index b8ceee576cdf..760217bbb2fa 100644
--- a/arch/mips/kernel/mips-cm.c
+++ b/arch/mips/kernel/mips-cm.c
@@ -9,6 +9,8 @@
  */
 
 #include <linux/errno.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
 
 #include <asm/mips-cm.h>
 #include <asm/mipsregs.h>
@@ -22,7 +24,7 @@ static char *cm2_tr[8] = {
 	"0x04", "cpc", "0x06", "0x07"
 };
 
-/* CM3 Tag ECC transation type */
+/* CM3 Tag ECC transaction type */
 static char *cm3_tr[16] = {
 	[0x0] = "ReqNoData",
 	[0x1] = "0x1",
@@ -136,6 +138,9 @@ static char *cm3_causes[32] = {
 	"0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f"
 };
 
+static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock);
+static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
+
 phys_addr_t __mips_cm_phys_base(void)
 {
 	u32 config3 = read_c0_config3();
@@ -200,6 +205,7 @@ int mips_cm_probe(void)
 {
 	phys_addr_t addr;
 	u32 base_reg;
+	unsigned cpu;
 
 	/*
 	 * No need to probe again if we have already been
@@ -247,38 +253,70 @@ int mips_cm_probe(void)
 	/* determine register width for this CM */
 	mips_cm_is64 = config_enabled(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3);
 
+	for_each_possible_cpu(cpu)
+		spin_lock_init(&per_cpu(cm_core_lock, cpu));
+
 	return 0;
 }
 
-void mips_cm_error_report(void)
+void mips_cm_lock_other(unsigned int core, unsigned int vp)
 {
-	unsigned long revision = mips_cm_revision();
+	unsigned curr_core;
+	u32 val;
+
+	preempt_disable();
+	curr_core = current_cpu_data.core;
+	spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
+			  per_cpu(cm_core_lock_flags, curr_core));
+
+	if (mips_cm_revision() >= CM_REV_CM3) {
+		val = core << CM3_GCR_Cx_OTHER_CORE_SHF;
+		val |= vp << CM3_GCR_Cx_OTHER_VP_SHF;
+	} else {
+		BUG_ON(vp != 0);
+		val = core << CM_GCR_Cx_OTHER_CORENUM_SHF;
+	}
+
+	write_gcr_cl_other(val);
+
 	/*
-	 * CM3 has a 64-bit Error cause register with 0:57 containing the error
-	 * info and 63:58 the error type. For old CMs, everything is contained
-	 * in a single 32-bit register (0:26 and 31:27 respectively). Even
-	 * though the cm_error is u64, we will simply ignore the upper word
-	 * for CM2.
+	 * Ensure the core-other region reflects the appropriate core &
+	 * VP before any accesses to it occur.
 	 */
-	u64 cm_error = read_gcr_error_cause();
-	int cm_error_cause_sft = CM_GCR_ERROR_CAUSE_ERRTYPE_SHF +
-				 ((revision >= CM_REV_CM3) ? 31 : 0);
-	unsigned long cm_addr = read_gcr_error_addr();
-	unsigned long cm_other = read_gcr_error_mult();
+	mb();
+}
+
+void mips_cm_unlock_other(void)
+{
+	unsigned curr_core = current_cpu_data.core;
+
+	spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
+			       per_cpu(cm_core_lock_flags, curr_core));
+	preempt_enable();
+}
+
+void mips_cm_error_report(void)
+{
+	u64 cm_error, cm_addr, cm_other;
+	unsigned long revision;
 	int ocause, cause;
 	char buf[256];
 
 	if (!mips_cm_present())
 		return;
 
-	cause = cm_error >> cm_error_cause_sft;
+	revision = mips_cm_revision();
 
-	if (!cause)
-		/* All good */
-		return;
-
-	ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
 	if (revision < CM_REV_CM3) { /* CM2 */
+		cm_error = read_gcr_error_cause();
+		cm_addr = read_gcr_error_addr();
+		cm_other = read_gcr_error_mult();
+		cause = cm_error >> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF;
+		ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+
+		if (!cause)
+			return;
+
 		if (cause < 16) {
 			unsigned long cca_bits = (cm_error >> 15) & 7;
 			unsigned long tr_bits = (cm_error >> 12) & 7;
@@ -310,18 +348,30 @@ void mips_cm_error_report(void)
 		}
 			pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,
 			       cm2_causes[cause], buf);
-		pr_err("CM_ADDR =%08lx\n", cm_addr);
-		pr_err("CM_OTHER=%08lx %s\n", cm_other, cm2_causes[ocause]);
+		pr_err("CM_ADDR =%08llx\n", cm_addr);
+		pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]);
 	} else { /* CM3 */
-	/* Used by cause == {1,2,3} */
-		unsigned long core_id_bits = (cm_error >> 22) & 0xf;
-		unsigned long vp_id_bits = (cm_error >> 18) & 0xf;
-		unsigned long cmd_bits = (cm_error >> 14) & 0xf;
-		unsigned long cmd_group_bits = (cm_error >> 11) & 0xf;
-		unsigned long cm3_cca_bits = (cm_error >> 8) & 7;
-		unsigned long mcp_bits = (cm_error >> 5) & 0xf;
-		unsigned long cm3_tr_bits = (cm_error >> 1) & 0xf;
-		unsigned long sched_bit = cm_error & 0x1;
+		ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
+		ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
+
+		cm_error = read64_gcr_error_cause();
+		cm_addr = read64_gcr_error_addr();
+		cm_other = read64_gcr_error_mult();
+		cause = cm_error >> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF;
+		ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF;
+
+		if (!cause)
+			return;
+
+		/* Used by cause == {1,2,3} */
+		core_id_bits = (cm_error >> 22) & 0xf;
+		vp_id_bits = (cm_error >> 18) & 0xf;
+		cmd_bits = (cm_error >> 14) & 0xf;
+		cmd_group_bits = (cm_error >> 11) & 0xf;
+		cm3_cca_bits = (cm_error >> 8) & 7;
+		mcp_bits = (cm_error >> 5) & 0xf;
+		cm3_tr_bits = (cm_error >> 1) & 0xf;
+		sched_bit = cm_error & 0x1;
 
 		if (cause == 1 || cause == 3) { /* Tag ECC */
 			unsigned long tag_ecc = (cm_error >> 57) & 0x1;
@@ -363,12 +413,14 @@ void mips_cm_error_report(void)
 				 cm3_cmd_group[cmd_group_bits],
 				 cm3_cca_bits, 1 << mcp_bits,
 				 cm3_tr[cm3_tr_bits], sched_bit);
+		} else {
+			buf[0] = 0;
 		}
 
 		pr_err("CM_ERROR=%llx %s <%s>\n", cm_error,
 		       cm3_causes[cause], buf);
-		pr_err("CM_ADDR =%lx\n", cm_addr);
-		pr_err("CM_OTHER=%lx %s\n", cm_other, cm3_causes[ocause]);
+		pr_err("CM_ADDR =%llx\n", cm_addr);
+		pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]);
 	}
 
 	/* reprime cause register */
diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c
index 8af4d627b68b..566b8d2c092c 100644
--- a/arch/mips/kernel/mips-cpc.c
+++ b/arch/mips/kernel/mips-cpc.c
@@ -76,6 +76,12 @@ void mips_cpc_lock_other(unsigned int core)
 	spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
 			  per_cpu(cpc_core_lock_flags, curr_core));
 	write_cpc_cl_other(core << CPC_Cx_OTHER_CORENUM_SHF);
+
+	/*
+	 * Ensure the core-other region reflects the appropriate core &
+	 * VP before any accesses to it occur.
+	 */
+	mb();
 }
 
 void mips_cpc_unlock_other(void)
diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c
index f2977f00911b..3fff89ae760b 100644
--- a/arch/mips/kernel/mips-r2-to-r6-emul.c
+++ b/arch/mips/kernel/mips-r2-to-r6-emul.c
@@ -22,6 +22,7 @@
 #include <asm/asm.h>
 #include <asm/branch.h>
 #include <asm/break.h>
+#include <asm/debug.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 #include <asm/inst.h>
@@ -939,42 +940,42 @@ repeat:
 		switch (rt) {
 		case tgei_op:
 			if ((long)regs->regs[rs] >= MIPSInst_SIMM(inst))
-				do_trap_or_bp(regs, 0, "TGEI");
+				do_trap_or_bp(regs, 0, 0, "TGEI");
 
 			MIPS_R2_STATS(traps);
 
 			break;
 		case tgeiu_op:
 			if (regs->regs[rs] >= MIPSInst_UIMM(inst))
-				do_trap_or_bp(regs, 0, "TGEIU");
+				do_trap_or_bp(regs, 0, 0, "TGEIU");
 
 			MIPS_R2_STATS(traps);
 
 			break;
 		case tlti_op:
 			if ((long)regs->regs[rs] < MIPSInst_SIMM(inst))
-				do_trap_or_bp(regs, 0, "TLTI");
+				do_trap_or_bp(regs, 0, 0, "TLTI");
 
 			MIPS_R2_STATS(traps);
 
 			break;
 		case tltiu_op:
 			if (regs->regs[rs] < MIPSInst_UIMM(inst))
-				do_trap_or_bp(regs, 0, "TLTIU");
+				do_trap_or_bp(regs, 0, 0, "TLTIU");
 
 			MIPS_R2_STATS(traps);
 
 			break;
 		case teqi_op:
 			if (regs->regs[rs] == MIPSInst_SIMM(inst))
-				do_trap_or_bp(regs, 0, "TEQI");
+				do_trap_or_bp(regs, 0, 0, "TEQI");
 
 			MIPS_R2_STATS(traps);
 
 			break;
 		case tnei_op:
 			if (regs->regs[rs] != MIPSInst_SIMM(inst))
-				do_trap_or_bp(regs, 0, "TNEI");
+				do_trap_or_bp(regs, 0, 0, "TNEI");
 
 			MIPS_R2_STATS(traps);
 
@@ -2363,7 +2364,6 @@ static const struct file_operations mipsr2_clear_fops = {
 
 static int __init mipsr2_init_debugfs(void)
 {
-	extern struct dentry	*mips_debugfs_dir;
 	struct dentry		*mipsr2_emul;
 
 	if (!mips_debugfs_dir)
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 291af0b5c482..e2b6ab74643d 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -17,6 +17,7 @@
 #include <asm/fpu.h>
 #include <asm/msa.h>
 
+extern void *__bzero_kernel(void *__s, size_t __count);
 extern void *__bzero(void *__s, size_t __count);
 extern long __strncpy_from_kernel_nocheck_asm(char *__to,
 					      const char *__from, long __len);
@@ -64,6 +65,7 @@ EXPORT_SYMBOL(__copy_from_user_eva);
 EXPORT_SYMBOL(__copy_in_user_eva);
 EXPORT_SYMBOL(__copy_to_user_eva);
 EXPORT_SYMBOL(__copy_user_inatomic_eva);
+EXPORT_SYMBOL(__bzero_kernel);
 #endif
 EXPORT_SYMBOL(__bzero);
 EXPORT_SYMBOL(__strncpy_from_kernel_nocheck_asm);
diff --git a/arch/mips/kernel/module-rela.c b/arch/mips/kernel/module-rela.c
index 2b70723071c3..9083d63b765c 100644
--- a/arch/mips/kernel/module-rela.c
+++ b/arch/mips/kernel/module-rela.c
@@ -109,9 +109,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		       struct module *me)
 {
 	Elf_Mips_Rela *rel = (void *) sechdrs[relsec].sh_addr;
+	int (*handler)(struct module *me, u32 *location, Elf_Addr v);
 	Elf_Sym *sym;
 	u32 *location;
-	unsigned int i;
+	unsigned int i, type;
 	Elf_Addr v;
 	int res;
 
@@ -134,9 +135,21 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 			return -ENOENT;
 		}
 
-		v = sym->st_value + rel[i].r_addend;
+		type = ELF_MIPS_R_TYPE(rel[i]);
+
+		if (type < ARRAY_SIZE(reloc_handlers_rela))
+			handler = reloc_handlers_rela[type];
+		else
+			handler = NULL;
 
-		res = reloc_handlers_rela[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (!handler) {
+			pr_err("%s: Unknown relocation type %u\n",
+			       me->name, type);
+			return -EINVAL;
+		}
+
+		v = sym->st_value + rel[i].r_addend;
+		res = handler(me, location, v);
 		if (res)
 			return res;
 	}
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index 1833f5171ccd..f9b2936d598d 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -197,9 +197,10 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 		   struct module *me)
 {
 	Elf_Mips_Rel *rel = (void *) sechdrs[relsec].sh_addr;
+	int (*handler)(struct module *me, u32 *location, Elf_Addr v);
 	Elf_Sym *sym;
 	u32 *location;
-	unsigned int i;
+	unsigned int i, type;
 	Elf_Addr v;
 	int res;
 
@@ -223,9 +224,21 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 			return -ENOENT;
 		}
 
-		v = sym->st_value;
+		type = ELF_MIPS_R_TYPE(rel[i]);
+
+		if (type < ARRAY_SIZE(reloc_handlers_rel))
+			handler = reloc_handlers_rel[type];
+		else
+			handler = NULL;
 
-		res = reloc_handlers_rel[ELF_MIPS_R_TYPE(rel[i])](me, location, v);
+		if (!handler) {
+			pr_err("%s: Unknown relocation type %u\n",
+			       me->name, type);
+			return -EINVAL;
+		}
+
+		v = sym->st_value;
+		res = handler(me, location, v);
 		if (res)
 			return res;
 	}
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index d7b8dd43147a..9bc1191b1ab0 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -530,7 +530,7 @@ static void mipspmu_enable(struct pmu *pmu)
 
 /*
  * MIPS performance counters can be per-TC. The control registers can
- * not be directly accessed accross CPUs. Hence if we want to do global
+ * not be directly accessed across CPUs. Hence if we want to do global
  * control, we need cross CPU calls. on_each_cpu() can help us, but we
  * can not make sure this function is called with interrupts enabled. So
  * here we pause local counters and then grab a rwlock and leave the
diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c
index f63a289977cc..fa3f9ebad8f4 100644
--- a/arch/mips/kernel/pm-cps.c
+++ b/arch/mips/kernel/pm-cps.c
@@ -472,7 +472,7 @@ static void * __init cps_gen_entry_code(unsigned cpu, enum cps_pm_state state)
 	/*
 	 * Disable all but self interventions. The load from COHCTL is defined
 	 * by the interAptiv & proAptiv SUMs as ensuring that the operation
-	 * resulting from the preceeding store is complete.
+	 * resulting from the preceding store is complete.
 	 */
 	uasm_i_addiu(&p, t0, zero, 1 << cpu_data[cpu].core);
 	uasm_i_sw(&p, t0, 0, r_pcohctl);
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index f2975d4d1e44..92880cee449e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -65,12 +65,10 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
 	status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK);
 	status |= KU_USER;
 	regs->cp0_status = status;
+	lose_fpu(0);
+	clear_thread_flag(TIF_MSA_CTX_LIVE);
 	clear_used_math();
-	clear_fpu_owner();
 	init_dsp();
-	clear_thread_flag(TIF_USEDMSA);
-	clear_thread_flag(TIF_MSA_CTX_LIVE);
-	disable_msa();
 	regs->cp0_epc = pc;
 	regs->regs[29] = sp;
 }
@@ -617,7 +615,7 @@ int mips_set_process_fp_mode(struct task_struct *task, unsigned int value)
 	 * allows us to only worry about whether an FP mode switch is in
 	 * progress when FP is first used in a tasks time slice. Pretty much all
 	 * of the mode switch overhead can thus be confined to cases where mode
-	 * switches are actually occuring. That is, to here. However for the
+	 * switches are actually occurring. That is, to here. However for the
 	 * thread performing the mode switch it may take a while...
 	 */
 	if (num_online_cpus() > 1) {
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index 4f0ac78d17f1..a5279b2f3198 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -548,9 +548,6 @@ static const struct pt_regs_offset regoffset_table[] = {
 	REG_OFFSET_NAME(c0_badvaddr, cp0_badvaddr),
 	REG_OFFSET_NAME(c0_cause, cp0_cause),
 	REG_OFFSET_NAME(c0_epc, cp0_epc),
-#ifdef CONFIG_MIPS_MT_SMTC
-	REG_OFFSET_NAME(c0_tcstatus, cp0_tcstatus),
-#endif
 #ifdef CONFIG_CPU_CAVIUM_OCTEON
 	REG_OFFSET_NAME(mpl0, mpl[0]),
 	REG_OFFSET_NAME(mpl1, mpl[1]),
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
index 5ce3b746cedc..b4ac6374a38f 100644
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -125,7 +125,7 @@ LEAF(_restore_fp_context)
 	END(_restore_fp_context)
 	.set	reorder
 
-	.type	fault@function
+	.type	fault, @function
 	.ent	fault
 fault:	li	v0, -EFAULT
 	jr	ra
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index f09546ee2cdc..17732f876eff 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -358,7 +358,7 @@ LEAF(_restore_msa_all_upper)
 
 	.set	reorder
 
-	.type	fault@function
+	.type	fault, @function
 	.ent	fault
 fault:	li	v0, -EFAULT				# failure
 	jr	ra
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 65a74e4f0f45..d01fe53a6638 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -594,3 +594,7 @@ EXPORT(sys_call_table)
 	PTR	sys_execveat
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
+	PTR	sys_copy_file_range		/* 4360 */
+	PTR	sys_preadv2
+	PTR	sys_pwritev2
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index e732981cf99f..6b73ecc02597 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -432,4 +432,8 @@ EXPORT(sys_call_table)
 	PTR	sys_execveat
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
+	PTR	sys_copy_file_range		/* 5320 */
+	PTR	sys_preadv2
+	PTR	sys_pwritev2
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index c79484397584..71f99d5f7a06 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -422,4 +422,8 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_execveat		/* 6320 */
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
+	PTR	sys_copy_file_range
+	PTR	compat_sys_preadv2		/* 6325 */
+	PTR	compat_sys_pwritev2
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 6369cfd390c6..91b43eea2d5a 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -577,4 +577,8 @@ EXPORT(sys32_call_table)
 	PTR	compat_sys_execveat
 	PTR	sys_userfaultfd
 	PTR	sys_membarrier
+	PTR	sys_mlock2
+	PTR	sys_copy_file_range		/* 4360 */
+	PTR	compat_sys_preadv2
+	PTR	compat_sys_pwritev2
 	.size	sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c
index 076ead2a9859..87bc74a5a518 100644
--- a/arch/mips/kernel/segment.c
+++ b/arch/mips/kernel/segment.c
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <asm/cpu.h>
+#include <asm/debug.h>
 #include <asm/mipsregs.h>
 
 static void build_segment_config(char *str, unsigned int cfg)
@@ -91,7 +92,6 @@ static const struct file_operations segments_fops = {
 
 static int __init segments_info(void)
 {
-	extern struct dentry *mips_debugfs_dir;
 	struct dentry *segments;
 
 	if (cpu_has_segments) {
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 479515109e5b..4f607341a793 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -33,11 +33,16 @@
 #include <asm/cache.h>
 #include <asm/cdmm.h>
 #include <asm/cpu.h>
+#include <asm/debug.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp-ops.h>
 #include <asm/prom.h>
 
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+const char __section(.appended_dtb) __appended_dtb[0x100000];
+#endif /* CONFIG_MIPS_ELF_APPENDED_DTB */
+
 struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
 
 EXPORT_SYMBOL(cpu_data);
@@ -616,6 +621,10 @@ static void __init request_crashkernel(struct resource *res)
 }
 #endif /* !defined(CONFIG_KEXEC)  */
 
+#define USE_PROM_CMDLINE	IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER)
+#define USE_DTB_CMDLINE		IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)
+#define EXTEND_WITH_PROM	IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)
+
 static void __init arch_mem_init(char **cmdline_p)
 {
 	struct memblock_region *reg;
@@ -640,18 +649,24 @@ static void __init arch_mem_init(char **cmdline_p)
 	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
+#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
 	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
 #else
+	if ((USE_PROM_CMDLINE && arcs_cmdline[0]) ||
+	    (USE_DTB_CMDLINE && !boot_command_line[0]))
+		strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+
+	if (EXTEND_WITH_PROM && arcs_cmdline[0]) {
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+	}
+
+#if defined(CONFIG_CMDLINE_BOOL)
 	if (builtin_cmdline[0]) {
-		strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(arcs_cmdline, builtin_cmdline, COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
 	}
-	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
 #endif
-#else
-	strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
 #endif
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 
@@ -717,21 +732,23 @@ static void __init resource_init(void)
 			end = HIGHMEM_START - 1;
 
 		res = alloc_bootmem(sizeof(struct resource));
+
+		res->start = start;
+		res->end = end;
+		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+
 		switch (boot_mem_map.map[i].type) {
 		case BOOT_MEM_RAM:
 		case BOOT_MEM_INIT_RAM:
 		case BOOT_MEM_ROM_DATA:
 			res->name = "System RAM";
+			res->flags |= IORESOURCE_SYSRAM;
 			break;
 		case BOOT_MEM_RESERVED:
 		default:
 			res->name = "reserved";
 		}
 
-		res->start = start;
-		res->end = end;
-
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 		request_resource(&iomem_resource, res);
 
 		/*
@@ -767,6 +784,7 @@ static inline void prefill_possible_map(void) {}
 void __init setup_arch(char **cmdline_p)
 {
 	cpu_probe();
+	mips_cm_probe();
 	prom_init();
 
 	setup_early_fdc_console();
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 2fec67bfc457..bf792e2839a6 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -36,7 +36,6 @@
 #include <asm/ucontext.h>
 #include <asm/cpu-features.h>
 #include <asm/war.h>
-#include <asm/vdso.h>
 #include <asm/dsp.h>
 #include <asm/inst.h>
 #include <asm/msa.h>
@@ -752,16 +751,15 @@ static int setup_rt_frame(void *sig_return, struct ksignal *ksig,
 struct mips_abi mips_abi = {
 #ifdef CONFIG_TRAD_SIGNALS
 	.setup_frame	= setup_frame,
-	.signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
 #endif
 	.setup_rt_frame = setup_rt_frame,
-	.rt_signal_return_offset =
-		offsetof(struct mips_vdso, rt_signal_trampoline),
 	.restart	= __NR_restart_syscall,
 
 	.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
 	.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
 	.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
+
+	.vdso		= &vdso_image,
 };
 
 static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
@@ -801,11 +799,11 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	}
 
 	if (sig_uses_siginfo(&ksig->ka))
-		ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
+		ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn,
 					  ksig, regs, oldset);
 	else
-		ret = abi->setup_frame(vdso + abi->signal_return_offset, ksig,
-				       regs, oldset);
+		ret = abi->setup_frame(vdso + abi->vdso->off_sigreturn,
+				       ksig, regs, oldset);
 
 	signal_setup_done(ret, ksig, 0);
 }
diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c
index f7e89524e316..4909639aa35b 100644
--- a/arch/mips/kernel/signal32.c
+++ b/arch/mips/kernel/signal32.c
@@ -31,7 +31,6 @@
 #include <asm/ucontext.h>
 #include <asm/fpu.h>
 #include <asm/war.h>
-#include <asm/vdso.h>
 #include <asm/dsp.h>
 
 #include "signal-common.h"
@@ -406,14 +405,12 @@ static int setup_rt_frame_32(void *sig_return, struct ksignal *ksig,
  */
 struct mips_abi mips_abi_32 = {
 	.setup_frame	= setup_frame_32,
-	.signal_return_offset =
-		offsetof(struct mips_vdso, o32_signal_trampoline),
 	.setup_rt_frame = setup_rt_frame_32,
-	.rt_signal_return_offset =
-		offsetof(struct mips_vdso, o32_rt_signal_trampoline),
 	.restart	= __NR_O32_restart_syscall,
 
 	.off_sc_fpregs = offsetof(struct sigcontext32, sc_fpregs),
 	.off_sc_fpc_csr = offsetof(struct sigcontext32, sc_fpc_csr),
 	.off_sc_used_math = offsetof(struct sigcontext32, sc_used_math),
+
+	.vdso		= &vdso_image_o32,
 };
diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c
index 0d017fdcaf07..a7bc38430500 100644
--- a/arch/mips/kernel/signal_n32.c
+++ b/arch/mips/kernel/signal_n32.c
@@ -38,7 +38,6 @@
 #include <asm/fpu.h>
 #include <asm/cpu-features.h>
 #include <asm/war.h>
-#include <asm/vdso.h>
 
 #include "signal-common.h"
 
@@ -151,11 +150,11 @@ static int setup_rt_frame_n32(void *sig_return, struct ksignal *ksig,
 
 struct mips_abi mips_abi_n32 = {
 	.setup_rt_frame = setup_rt_frame_n32,
-	.rt_signal_return_offset =
-		offsetof(struct mips_vdso, n32_rt_signal_trampoline),
 	.restart	= __NR_N32_restart_syscall,
 
 	.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
 	.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
 	.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
+
+	.vdso		= &vdso_image_n32,
 };
diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c
index d5e0f949dc48..76923349b4fe 100644
--- a/arch/mips/kernel/smp-cmp.c
+++ b/arch/mips/kernel/smp-cmp.c
@@ -149,8 +149,8 @@ void __init cmp_prepare_cpus(unsigned int max_cpus)
 }
 
 struct plat_smp_ops cmp_smp_ops = {
-	.send_ipi_single	= gic_send_ipi_single,
-	.send_ipi_mask		= gic_send_ipi_mask,
+	.send_ipi_single	= mips_smp_send_ipi_single,
+	.send_ipi_mask		= mips_smp_send_ipi_mask,
 	.init_secondary		= cmp_init_secondary,
 	.smp_finish		= cmp_smp_finish,
 	.boot_secondary		= cmp_boot_secondary,
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index c88937745b4e..253e1409338c 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -8,6 +8,7 @@
  * option) any later version.
  */
 
+#include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/irqchip/mips-gic.h>
 #include <linux/sched.h>
@@ -37,8 +38,9 @@ static unsigned core_vpe_count(unsigned core)
 	if (!config_enabled(CONFIG_MIPS_MT_SMP) || !cpu_has_mipsmt)
 		return 1;
 
-	write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+	mips_cm_lock_other(core, 0);
 	cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK;
+	mips_cm_unlock_other();
 	return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1;
 }
 
@@ -133,11 +135,9 @@ static void __init cps_prepare_cpus(unsigned int max_cpus)
 	/*
 	 * Patch the start of mips_cps_core_entry to provide:
 	 *
-	 * v1 = CM base address
 	 * s0 = kseg0 CCA
 	 */
 	entry_code = (u32 *)&mips_cps_core_entry;
-	UASM_i_LA(&entry_code, 3, (long)mips_cm_base);
 	uasm_i_addiu(&entry_code, 16, 0, cca);
 	blast_dcache_range((unsigned long)&mips_cps_core_entry,
 			   (unsigned long)entry_code);
@@ -190,10 +190,11 @@ err_out:
 
 static void boot_core(unsigned core)
 {
-	u32 access;
+	u32 access, stat, seq_state;
+	unsigned timeout;
 
 	/* Select the appropriate core */
-	write_gcr_cl_other(core << CM_GCR_Cx_OTHER_CORENUM_SHF);
+	mips_cm_lock_other(core, 0);
 
 	/* Set its reset vector */
 	write_gcr_co_reset_base(CKSEG1ADDR((unsigned long)mips_cps_core_entry));
@@ -201,6 +202,9 @@ static void boot_core(unsigned core)
 	/* Ensure its coherency is disabled */
 	write_gcr_co_coherence(0);
 
+	/* Start it with the legacy memory map and exception base */
+	write_gcr_co_reset_ext_base(CM_GCR_RESET_EXT_BASE_UEB);
+
 	/* Ensure the core can access the GCRs */
 	access = read_gcr_access();
 	access |= 1 << (CM_GCR_ACCESS_ACCESSEN_SHF + core);
@@ -210,12 +214,36 @@ static void boot_core(unsigned core)
 		/* Reset the core */
 		mips_cpc_lock_other(core);
 		write_cpc_co_cmd(CPC_Cx_CMD_RESET);
+
+		timeout = 100;
+		while (true) {
+			stat = read_cpc_co_stat_conf();
+			seq_state = stat & CPC_Cx_STAT_CONF_SEQSTATE_MSK;
+
+			/* U6 == coherent execution, ie. the core is up */
+			if (seq_state == CPC_Cx_STAT_CONF_SEQSTATE_U6)
+				break;
+
+			/* Delay a little while before we start warning */
+			if (timeout) {
+				timeout--;
+				mdelay(10);
+				continue;
+			}
+
+			pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n",
+				core, stat);
+			mdelay(1000);
+		}
+
 		mips_cpc_unlock_other();
 	} else {
 		/* Take the core out of reset */
 		write_gcr_co_reset_release(0);
 	}
 
+	mips_cm_unlock_other();
+
 	/* The core is now powered up */
 	bitmap_set(core_power, core, 1);
 }
@@ -444,8 +472,8 @@ static struct plat_smp_ops cps_smp_ops = {
 	.boot_secondary		= cps_boot_secondary,
 	.init_secondary		= cps_init_secondary,
 	.smp_finish		= cps_smp_finish,
-	.send_ipi_single	= gic_send_ipi_single,
-	.send_ipi_mask		= gic_send_ipi_mask,
+	.send_ipi_single	= mips_smp_send_ipi_single,
+	.send_ipi_mask		= mips_smp_send_ipi_mask,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_disable		= cps_cpu_disable,
 	.cpu_die		= cps_cpu_die,
diff --git a/arch/mips/kernel/smp-gic.c b/arch/mips/kernel/smp-gic.c
index 5f0ab5bcd01e..9b63829cf929 100644
--- a/arch/mips/kernel/smp-gic.c
+++ b/arch/mips/kernel/smp-gic.c
@@ -46,9 +46,11 @@ void gic_send_ipi_single(int cpu, unsigned int action)
 
 	if (mips_cpc_present() && (core != current_cpu_data.core)) {
 		while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+			mips_cm_lock_other(core, 0);
 			mips_cpc_lock_other(core);
 			write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
 			mips_cpc_unlock_other();
+			mips_cm_unlock_other();
 		}
 	}
 
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 86311a164ef1..4f9570a57e8d 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -121,7 +121,7 @@ static void vsmp_send_ipi_single(int cpu, unsigned int action)
 
 #ifdef CONFIG_MIPS_GIC
 	if (gic_present) {
-		gic_send_ipi_single(cpu, action);
+		mips_smp_send_ipi_single(cpu, action);
 		return;
 	}
 #endif
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index bd4385a8e6e8..27cb638f0824 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -33,12 +33,16 @@
 #include <linux/cpu.h>
 #include <linux/err.h>
 #include <linux/ftrace.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <linux/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/idle.h>
 #include <asm/r4k-timer.h>
+#include <asm/mips-cpc.h>
 #include <asm/mmu_context.h>
 #include <asm/time.h>
 #include <asm/setup.h>
@@ -79,6 +83,11 @@ static cpumask_t cpu_core_setup_map;
 
 cpumask_t cpu_coherent_mask;
 
+#ifdef CONFIG_GENERIC_IRQ_IPI
+static struct irq_desc *call_desc;
+static struct irq_desc *sched_desc;
+#endif
+
 static inline void set_cpu_sibling_map(int cpu)
 {
 	int i;
@@ -121,6 +130,7 @@ static inline void calculate_cpu_foreign_map(void)
 	cpumask_t temp_foreign_map;
 
 	/* Re-calculate the mask */
+	cpumask_clear(&temp_foreign_map);
 	for_each_online_cpu(i) {
 		core_present = 0;
 		for_each_cpu(k, &temp_foreign_map)
@@ -145,6 +155,145 @@ void register_smp_ops(struct plat_smp_ops *ops)
 	mp_ops = ops;
 }
 
+#ifdef CONFIG_GENERIC_IRQ_IPI
+void mips_smp_send_ipi_single(int cpu, unsigned int action)
+{
+	mips_smp_send_ipi_mask(cpumask_of(cpu), action);
+}
+
+void mips_smp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	unsigned long flags;
+	unsigned int core;
+	int cpu;
+
+	local_irq_save(flags);
+
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		__ipi_send_mask(call_desc, mask);
+		break;
+
+	case SMP_RESCHEDULE_YOURSELF:
+		__ipi_send_mask(sched_desc, mask);
+		break;
+
+	default:
+		BUG();
+	}
+
+	if (mips_cpc_present()) {
+		for_each_cpu(cpu, mask) {
+			core = cpu_data[cpu].core;
+
+			if (core == current_cpu_data.core)
+				continue;
+
+			while (!cpumask_test_cpu(cpu, &cpu_coherent_mask)) {
+				mips_cpc_lock_other(core);
+				write_cpc_co_cmd(CPC_Cx_CMD_PWRUP);
+				mips_cpc_unlock_other();
+			}
+		}
+	}
+
+	local_irq_restore(flags);
+}
+
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+	scheduler_ipi();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+	generic_smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= IRQF_PERCPU,
+	.name		= "IPI call"
+};
+
+static __init void smp_ipi_init_one(unsigned int virq,
+				    struct irqaction *action)
+{
+	int ret;
+
+	irq_set_handler(virq, handle_percpu_irq);
+	ret = setup_irq(virq, action);
+	BUG_ON(ret);
+}
+
+static int __init mips_smp_ipi_init(void)
+{
+	unsigned int call_virq, sched_virq;
+	struct irq_domain *ipidomain;
+	struct device_node *node;
+
+	/*
+	 * In some cases like qemu-malta, it is desired to try SMP with
+	 * a single core. Qemu-malta has no GIC, so an attempt to set any IPIs
+	 * would cause a BUG_ON() to be triggered since there's no ipidomain.
+	 *
+	 * Since for a single core system IPIs aren't required really, skip the
+	 * initialisation which should generally keep any such configurations
+	 * happy and only fail hard when trying to truely run SMP.
+	 */
+	if (cpumask_weight(cpu_possible_mask) == 1)
+		return 0;
+
+	node = of_irq_find_parent(of_root);
+	ipidomain = irq_find_matching_host(node, DOMAIN_BUS_IPI);
+
+	/*
+	 * Some platforms have half DT setup. So if we found irq node but
+	 * didn't find an ipidomain, try to search for one that is not in the
+	 * DT.
+	 */
+	if (node && !ipidomain)
+		ipidomain = irq_find_matching_host(NULL, DOMAIN_BUS_IPI);
+
+	BUG_ON(!ipidomain);
+
+	call_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
+	BUG_ON(!call_virq);
+
+	sched_virq = irq_reserve_ipi(ipidomain, cpu_possible_mask);
+	BUG_ON(!sched_virq);
+
+	if (irq_domain_is_ipi_per_cpu(ipidomain)) {
+		int cpu;
+
+		for_each_cpu(cpu, cpu_possible_mask) {
+			smp_ipi_init_one(call_virq + cpu, &irq_call);
+			smp_ipi_init_one(sched_virq + cpu, &irq_resched);
+		}
+	} else {
+		smp_ipi_init_one(call_virq, &irq_call);
+		smp_ipi_init_one(sched_virq, &irq_resched);
+	}
+
+	call_desc = irq_to_desc(call_virq);
+	sched_desc = irq_to_desc(sched_virq);
+
+	return 0;
+}
+early_initcall(mips_smp_ipi_init);
+#endif
+
 /*
  * First C code run on the secondary CPUs after being started up by
  * the master.
@@ -191,7 +340,7 @@ asmlinkage void start_secondary(void)
 	WARN_ON_ONCE(!irqs_disabled());
 	mp_ops->smp_finish();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 static void stop_this_cpu(void *dummy)
diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c
index 39f7ab7b0426..f7d86955d1b8 100644
--- a/arch/mips/kernel/spinlock_test.c
+++ b/arch/mips/kernel/spinlock_test.c
@@ -5,7 +5,7 @@
 #include <linux/debugfs.h>
 #include <linux/export.h>
 #include <linux/spinlock.h>
-
+#include <asm/debug.h>
 
 static int ss_get(void *data, u64 *val)
 {
@@ -115,8 +115,6 @@ static int multi_get(void *data, u64 *val)
 
 DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n");
 
-
-extern struct dentry *mips_debugfs_dir;
 static int __init spinlock_test(void)
 {
 	struct dentry *d;
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 1ba775d24d38..506021f62549 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -12,14 +12,15 @@
  * Save stack-backtrace addresses into a stack_trace buffer:
  */
 static void save_raw_context_stack(struct stack_trace *trace,
-	unsigned long reg29)
+	unsigned long reg29, int savesched)
 {
 	unsigned long *sp = (unsigned long *)reg29;
 	unsigned long addr;
 
 	while (!kstack_end(sp)) {
 		addr = *sp++;
-		if (__kernel_text_address(addr)) {
+		if (__kernel_text_address(addr) &&
+		    (savesched || !in_sched_functions(addr))) {
 			if (trace->skip > 0)
 				trace->skip--;
 			else
@@ -31,7 +32,7 @@ static void save_raw_context_stack(struct stack_trace *trace,
 }
 
 static void save_context_stack(struct stack_trace *trace,
-	struct task_struct *tsk, struct pt_regs *regs)
+	struct task_struct *tsk, struct pt_regs *regs, int savesched)
 {
 	unsigned long sp = regs->regs[29];
 #ifdef CONFIG_KALLSYMS
@@ -43,20 +44,22 @@ static void save_context_stack(struct stack_trace *trace,
 			(unsigned long)task_stack_page(tsk);
 		if (stack_page && sp >= stack_page &&
 		    sp <= stack_page + THREAD_SIZE - 32)
-			save_raw_context_stack(trace, sp);
+			save_raw_context_stack(trace, sp, savesched);
 		return;
 	}
 	do {
-		if (trace->skip > 0)
-			trace->skip--;
-		else
-			trace->entries[trace->nr_entries++] = pc;
-		if (trace->nr_entries >= trace->max_entries)
-			break;
+		if (savesched || !in_sched_functions(pc)) {
+			if (trace->skip > 0)
+				trace->skip--;
+			else
+				trace->entries[trace->nr_entries++] = pc;
+			if (trace->nr_entries >= trace->max_entries)
+				break;
+		}
 		pc = unwind_stack(tsk, &sp, pc, &ra);
 	} while (pc);
 #else
-	save_raw_context_stack(trace, sp);
+	save_raw_context_stack(trace, sp, savesched);
 #endif
 }
 
@@ -82,6 +85,6 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 		regs->cp0_epc = tsk->thread.reg31;
 	} else
 		prepare_frametrace(regs);
-	save_context_stack(trace, tsk, regs);
+	save_context_stack(trace, tsk, regs, tsk == current);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c
index 2242bdd4370e..4472a7f98577 100644
--- a/arch/mips/kernel/sync-r4k.c
+++ b/arch/mips/kernel/sync-r4k.c
@@ -17,35 +17,23 @@
 #include <asm/barrier.h>
 #include <asm/mipsregs.h>
 
-static atomic_t count_start_flag = ATOMIC_INIT(0);
+static unsigned int initcount = 0;
 static atomic_t count_count_start = ATOMIC_INIT(0);
 static atomic_t count_count_stop = ATOMIC_INIT(0);
-static atomic_t count_reference = ATOMIC_INIT(0);
 
 #define COUNTON 100
-#define NR_LOOPS 5
+#define NR_LOOPS 3
 
 void synchronise_count_master(int cpu)
 {
 	int i;
 	unsigned long flags;
-	unsigned int initcount;
 
 	printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu);
 
 	local_irq_save(flags);
 
 	/*
-	 * Notify the slaves that it's time to start
-	 */
-	atomic_set(&count_reference, read_c0_count());
-	atomic_set(&count_start_flag, cpu);
-	smp_wmb();
-
-	/* Count will be initialised to current timer for all CPU's */
-	initcount = read_c0_count();
-
-	/*
 	 * We loop a few times to get a primed instruction cache,
 	 * then the last pass is more or less synchronised and
 	 * the master and slaves each set their cycle counters to a known
@@ -63,9 +51,13 @@ void synchronise_count_master(int cpu)
 		atomic_set(&count_count_stop, 0);
 		smp_wmb();
 
-		/* this lets the slaves write their count register */
+		/* Let the slave writes its count register */
 		atomic_inc(&count_count_start);
 
+		/* Count will be initialised to current timer */
+		if (i == 1)
+			initcount = read_c0_count();
+
 		/*
 		 * Everyone initialises count in the last loop:
 		 */
@@ -73,7 +65,7 @@ void synchronise_count_master(int cpu)
 			write_c0_count(initcount);
 
 		/*
-		 * Wait for all slaves to leave the synchronization point:
+		 * Wait for slave to leave the synchronization point:
 		 */
 		while (atomic_read(&count_count_stop) != 1)
 			mb();
@@ -83,7 +75,6 @@ void synchronise_count_master(int cpu)
 	}
 	/* Arrange for an interrupt in a short while */
 	write_c0_compare(read_c0_count() + COUNTON);
-	atomic_set(&count_start_flag, 0);
 
 	local_irq_restore(flags);
 
@@ -98,19 +89,12 @@ void synchronise_count_master(int cpu)
 void synchronise_count_slave(int cpu)
 {
 	int i;
-	unsigned int initcount;
 
 	/*
 	 * Not every cpu is online at the time this gets called,
 	 * so we first wait for the master to say everyone is ready
 	 */
 
-	while (atomic_read(&count_start_flag) != cpu)
-		mb();
-
-	/* Count will be initialised to next expire for all CPU's */
-	initcount = atomic_read(&count_reference);
-
 	for (i = 0; i < NR_LOOPS; i++) {
 		atomic_inc(&count_count_start);
 		while (atomic_read(&count_count_start) != 2)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index fdb392b27e81..ae0c89d23ad7 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -37,6 +37,7 @@
 #include <linux/irq.h>
 #include <linux/perf_event.h>
 
+#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
 #include <asm/break.h>
@@ -55,6 +56,7 @@
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
 #include <asm/sections.h>
+#include <asm/siginfo.h>
 #include <asm/tlbdebug.h>
 #include <asm/traps.h>
 #include <asm/uaccess.h>
@@ -662,7 +664,7 @@ static int simulate_rdhwr_normal(struct pt_regs *regs, unsigned int opcode)
 	return -1;
 }
 
-static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned short opcode)
+static int simulate_rdhwr_mm(struct pt_regs *regs, unsigned int opcode)
 {
 	if ((opcode & MM_POOL32A_FUNC) == MM_RDHWR) {
 		int rd = (opcode & MM_RS) >> 16;
@@ -689,15 +691,15 @@ static int simulate_sync(struct pt_regs *regs, unsigned int opcode)
 asmlinkage void do_ov(struct pt_regs *regs)
 {
 	enum ctx_state prev_state;
-	siginfo_t info;
+	siginfo_t info = {
+		.si_signo = SIGFPE,
+		.si_code = FPE_INTOVF,
+		.si_addr = (void __user *)regs->cp0_epc,
+	};
 
 	prev_state = exception_enter();
 	die_if_kernel("Integer overflow", regs);
 
-	info.si_code = FPE_INTOVF;
-	info.si_signo = SIGFPE;
-	info.si_errno = 0;
-	info.si_addr = (void __user *) regs->cp0_epc;
 	force_sig_info(SIGFPE, &info, current);
 	exception_exit(prev_state);
 }
@@ -870,10 +872,10 @@ out:
 	exception_exit(prev_state);
 }
 
-void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
+void do_trap_or_bp(struct pt_regs *regs, unsigned int code, int si_code,
 	const char *str)
 {
-	siginfo_t info;
+	siginfo_t info = { 0 };
 	char b[40];
 
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
@@ -902,7 +904,6 @@ void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 		else
 			info.si_code = FPE_INTOVF;
 		info.si_signo = SIGFPE;
-		info.si_errno = 0;
 		info.si_addr = (void __user *) regs->cp0_epc;
 		force_sig_info(SIGFPE, &info, current);
 		break;
@@ -928,7 +929,13 @@ void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	default:
 		scnprintf(b, sizeof(b), "%s instruction in kernel code", str);
 		die_if_kernel(b, regs);
-		force_sig(SIGTRAP, current);
+		if (si_code) {
+			info.si_signo = SIGTRAP;
+			info.si_code = si_code;
+			force_sig_info(SIGTRAP, &info, current);
+		} else {
+			force_sig(SIGTRAP, current);
+		}
 	}
 }
 
@@ -1012,7 +1019,7 @@ asmlinkage void do_bp(struct pt_regs *regs)
 		break;
 	}
 
-	do_trap_or_bp(regs, bcode, "Break");
+	do_trap_or_bp(regs, bcode, TRAP_BRKPT, "Break");
 
 out:
 	set_fs(seg);
@@ -1054,7 +1061,7 @@ asmlinkage void do_tr(struct pt_regs *regs)
 			tcode = (opcode >> 6) & ((1 << 10) - 1);
 	}
 
-	do_trap_or_bp(regs, tcode, "Trap");
+	do_trap_or_bp(regs, tcode, 0, "Trap");
 
 out:
 	set_fs(seg);
@@ -1115,18 +1122,7 @@ no_r2_instr:
 	if (unlikely(compute_return_epc(regs) < 0))
 		goto out;
 
-	if (get_isa16_mode(regs->cp0_epc)) {
-		unsigned short mmop[2] = { 0 };
-
-		if (unlikely(get_user(mmop[0], epc) < 0))
-			status = SIGSEGV;
-		if (unlikely(get_user(mmop[1], epc) < 0))
-			status = SIGSEGV;
-		opcode = (mmop[0] << 16) | mmop[1];
-
-		if (status < 0)
-			status = simulate_rdhwr_mm(regs, opcode);
-	} else {
+	if (!get_isa16_mode(regs->cp0_epc)) {
 		if (unlikely(get_user(opcode, epc) < 0))
 			status = SIGSEGV;
 
@@ -1141,6 +1137,18 @@ no_r2_instr:
 
 		if (status < 0)
 			status = simulate_fp(regs, opcode, old_epc, old31);
+	} else if (cpu_has_mmips) {
+		unsigned short mmop[2] = { 0 };
+
+		if (unlikely(get_user(mmop[0], (u16 __user *)epc + 0) < 0))
+			status = SIGSEGV;
+		if (unlikely(get_user(mmop[1], (u16 __user *)epc + 1) < 0))
+			status = SIGSEGV;
+		opcode = mmop[0];
+		opcode = (opcode << 16) | mmop[1];
+
+		if (status < 0)
+			status = simulate_rdhwr_mm(regs, opcode);
 	}
 
 	if (status < 0)
@@ -1368,26 +1376,12 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		if (unlikely(compute_return_epc(regs) < 0))
 			break;
 
-		if (get_isa16_mode(regs->cp0_epc)) {
-			unsigned short mmop[2] = { 0 };
-
-			if (unlikely(get_user(mmop[0], epc) < 0))
-				status = SIGSEGV;
-			if (unlikely(get_user(mmop[1], epc) < 0))
-				status = SIGSEGV;
-			opcode = (mmop[0] << 16) | mmop[1];
-
-			if (status < 0)
-				status = simulate_rdhwr_mm(regs, opcode);
-		} else {
+		if (!get_isa16_mode(regs->cp0_epc)) {
 			if (unlikely(get_user(opcode, epc) < 0))
 				status = SIGSEGV;
 
 			if (!cpu_has_llsc && status < 0)
 				status = simulate_llsc(regs, opcode);
-
-			if (status < 0)
-				status = simulate_rdhwr_normal(regs, opcode);
 		}
 
 		if (status < 0)
@@ -1505,6 +1499,7 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
  */
 asmlinkage void do_watch(struct pt_regs *regs)
 {
+	siginfo_t info = { .si_signo = SIGTRAP, .si_code = TRAP_HWBKPT };
 	enum ctx_state prev_state;
 	u32 cause;
 
@@ -1525,7 +1520,7 @@ asmlinkage void do_watch(struct pt_regs *regs)
 	if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
 		mips_read_watch_registers();
 		local_irq_enable();
-		force_sig(SIGTRAP, current);
+		force_sig_info(SIGTRAP, &info, current);
 	} else {
 		mips_clear_watch_registers();
 		local_irq_enable();
@@ -1856,12 +1851,14 @@ void __noreturn nmi_exception_handler(struct pt_regs *regs)
 {
 	char str[100];
 
+	nmi_enter();
 	raw_notifier_call_chain(&nmi_chain, 0, regs);
 	bust_spinlocks(1);
 	snprintf(str, 100, "CPU%d NMI taken, CP0_EPC=%lx\n",
 		 smp_processor_id(), regs->cp0_epc);
 	regs->cp0_epc = read_c0_errorepc();
 	die(str, regs);
+	nmi_exit();
 }
 
 #define VECTORSPACING 0x100	/* for EI/VI mode */
@@ -2204,12 +2201,8 @@ void __init trap_init(void)
 		ebase = (unsigned long)
 			__alloc_bootmem(size, 1 << fls(size), 0);
 	} else {
-#ifdef CONFIG_KVM_GUEST
-#define KVM_GUEST_KSEG0     0x40000000
-        ebase = KVM_GUEST_KSEG0;
-#else
-        ebase = CKSEG0;
-#endif
+		ebase = CAC_BASE;
+
 		if (cpu_has_mips_r2_r6)
 			ebase += (read_c0_ebase() & 0x3ffff000);
 	}
@@ -2229,7 +2222,7 @@ void __init trap_init(void)
 
 	/*
 	 * Copy the generic exception handlers to their final destination.
-	 * This will be overriden later as suitable for a particular
+	 * This will be overridden later as suitable for a particular
 	 * configuration.
 	 */
 	set_handler(0x180, &except_vec3_generic, 0x80);
@@ -2251,7 +2244,7 @@ void __init trap_init(void)
 	 * Only some CPUs have the watch exceptions.
 	 */
 	if (cpu_has_watch)
-		set_except_vector(23, handle_watch);
+		set_except_vector(EXCCODE_WATCH, handle_watch);
 
 	/*
 	 * Initialise interrupt handlers
@@ -2278,27 +2271,27 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
-	set_except_vector(0, using_rollback_handler() ? rollback_handle_int
-						      : handle_int);
-	set_except_vector(1, handle_tlbm);
-	set_except_vector(2, handle_tlbl);
-	set_except_vector(3, handle_tlbs);
+	set_except_vector(EXCCODE_INT, using_rollback_handler() ?
+					rollback_handle_int : handle_int);
+	set_except_vector(EXCCODE_MOD, handle_tlbm);
+	set_except_vector(EXCCODE_TLBL, handle_tlbl);
+	set_except_vector(EXCCODE_TLBS, handle_tlbs);
 
-	set_except_vector(4, handle_adel);
-	set_except_vector(5, handle_ades);
+	set_except_vector(EXCCODE_ADEL, handle_adel);
+	set_except_vector(EXCCODE_ADES, handle_ades);
 
-	set_except_vector(6, handle_ibe);
-	set_except_vector(7, handle_dbe);
+	set_except_vector(EXCCODE_IBE, handle_ibe);
+	set_except_vector(EXCCODE_DBE, handle_dbe);
 
-	set_except_vector(8, handle_sys);
-	set_except_vector(9, handle_bp);
-	set_except_vector(10, rdhwr_noopt ? handle_ri :
+	set_except_vector(EXCCODE_SYS, handle_sys);
+	set_except_vector(EXCCODE_BP, handle_bp);
+	set_except_vector(EXCCODE_RI, rdhwr_noopt ? handle_ri :
 			  (cpu_has_vtag_icache ?
 			   handle_ri_rdhwr_vivt : handle_ri_rdhwr));
-	set_except_vector(11, handle_cpu);
-	set_except_vector(12, handle_ov);
-	set_except_vector(13, handle_tr);
-	set_except_vector(14, handle_msa_fpe);
+	set_except_vector(EXCCODE_CPU, handle_cpu);
+	set_except_vector(EXCCODE_OV, handle_ov);
+	set_except_vector(EXCCODE_TR, handle_tr);
+	set_except_vector(EXCCODE_MSAFPE, handle_msa_fpe);
 
 	if (current_cpu_type() == CPU_R6000 ||
 	    current_cpu_type() == CPU_R6000A) {
@@ -2319,25 +2312,25 @@ void __init trap_init(void)
 		board_nmi_handler_setup();
 
 	if (cpu_has_fpu && !cpu_has_nofpuex)
-		set_except_vector(15, handle_fpe);
+		set_except_vector(EXCCODE_FPE, handle_fpe);
 
-	set_except_vector(16, handle_ftlb);
+	set_except_vector(MIPS_EXCCODE_TLBPAR, handle_ftlb);
 
 	if (cpu_has_rixiex) {
-		set_except_vector(19, tlb_do_page_fault_0);
-		set_except_vector(20, tlb_do_page_fault_0);
+		set_except_vector(EXCCODE_TLBRI, tlb_do_page_fault_0);
+		set_except_vector(EXCCODE_TLBXI, tlb_do_page_fault_0);
 	}
 
-	set_except_vector(21, handle_msa);
-	set_except_vector(22, handle_mdmx);
+	set_except_vector(EXCCODE_MSADIS, handle_msa);
+	set_except_vector(EXCCODE_MDMX, handle_mdmx);
 
 	if (cpu_has_mcheck)
-		set_except_vector(24, handle_mcheck);
+		set_except_vector(EXCCODE_MCHECK, handle_mcheck);
 
 	if (cpu_has_mipsmt)
-		set_except_vector(25, handle_mt);
+		set_except_vector(EXCCODE_THREAD, handle_mt);
 
-	set_except_vector(26, handle_dsp);
+	set_except_vector(EXCCODE_DSPDIS, handle_dsp);
 
 	if (board_cache_error_setup)
 		board_cache_error_setup();
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index 990354dd6bde..5c62065cbf22 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -85,6 +85,7 @@
 #include <asm/branch.h>
 #include <asm/byteorder.h>
 #include <asm/cop2.h>
+#include <asm/debug.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 #include <asm/inst.h>
@@ -884,7 +885,7 @@ static void emulate_load_store_insn(struct pt_regs *regs,
 {
 	union mips_instruction insn;
 	unsigned long value;
-	unsigned int res;
+	unsigned int res, preempted;
 	unsigned long origpc;
 	unsigned long orig31;
 	void __user *fault_addr = NULL;
@@ -1225,27 +1226,36 @@ static void emulate_load_store_insn(struct pt_regs *regs,
 			if (!access_ok(VERIFY_READ, addr, sizeof(*fpr)))
 				goto sigbus;
 
-			/*
-			 * Disable preemption to avoid a race between copying
-			 * state from userland, migrating to another CPU and
-			 * updating the hardware vector register below.
-			 */
-			preempt_disable();
-
-			res = __copy_from_user_inatomic(fpr, addr,
-							sizeof(*fpr));
-			if (res)
-				goto fault;
-
-			/*
-			 * Update the hardware register if it is in use by the
-			 * task in this quantum, in order to avoid having to
-			 * save & restore the whole vector context.
-			 */
-			if (test_thread_flag(TIF_USEDMSA))
-				write_msa_wr(wd, fpr, df);
+			do {
+				/*
+				 * If we have live MSA context keep track of
+				 * whether we get preempted in order to avoid
+				 * the register context we load being clobbered
+				 * by the live context as it's saved during
+				 * preemption. If we don't have live context
+				 * then it can't be saved to clobber the value
+				 * we load.
+				 */
+				preempted = test_thread_flag(TIF_USEDMSA);
+
+				res = __copy_from_user_inatomic(fpr, addr,
+								sizeof(*fpr));
+				if (res)
+					goto fault;
 
-			preempt_enable();
+				/*
+				 * Update the hardware register if it is in use
+				 * by the task in this quantum, in order to
+				 * avoid having to save & restore the whole
+				 * vector context.
+				 */
+				preempt_disable();
+				if (test_thread_flag(TIF_USEDMSA)) {
+					write_msa_wr(wd, fpr, df);
+					preempted = 0;
+				}
+				preempt_enable();
+			} while (preempted);
 			break;
 
 		case msa_st_op:
@@ -2295,7 +2305,6 @@ sigbus:
 }
 
 #ifdef CONFIG_DEBUG_FS
-extern struct dentry *mips_debugfs_dir;
 static int __init debugfs_unaligned(void)
 {
 	struct dentry *d;
diff --git a/arch/mips/kernel/vdso.c b/arch/mips/kernel/vdso.c
index ed2a278722a9..975e99759bab 100644
--- a/arch/mips/kernel/vdso.c
+++ b/arch/mips/kernel/vdso.c
@@ -1,122 +1,175 @@
 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
  *
- * Copyright (C) 2009, 2010 Cavium Networks, Inc.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
 
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/init.h>
 #include <linux/binfmts.h>
 #include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/unistd.h>
-#include <linux/random.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/timekeeper_internal.h>
 
+#include <asm/abi.h>
 #include <asm/vdso.h>
-#include <asm/uasm.h>
-#include <asm/processor.h>
+
+/* Kernel-provided data used by the VDSO. */
+static union mips_vdso_data vdso_data __page_aligned_data;
 
 /*
- * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ * Mapping for the VDSO data/GIC pages. The real pages are mapped manually, as
+ * what we map and where within the area they are mapped is determined at
+ * runtime.
  */
-#define __NR_O32_sigreturn		4119
-#define __NR_O32_rt_sigreturn		4193
-#define __NR_N32_rt_sigreturn		6211
+static struct page *no_pages[] = { NULL };
+static struct vm_special_mapping vdso_vvar_mapping = {
+	.name = "[vvar]",
+	.pages = no_pages,
+};
 
-static struct page *vdso_page;
-
-static void __init install_trampoline(u32 *tramp, unsigned int sigreturn)
+static void __init init_vdso_image(struct mips_vdso_image *image)
 {
-	uasm_i_addiu(&tramp, 2, 0, sigreturn);	/* li v0, sigreturn */
-	uasm_i_syscall(&tramp, 0);
+	unsigned long num_pages, i;
+
+	BUG_ON(!PAGE_ALIGNED(image->data));
+	BUG_ON(!PAGE_ALIGNED(image->size));
+
+	num_pages = image->size / PAGE_SIZE;
+
+	for (i = 0; i < num_pages; i++) {
+		image->mapping.pages[i] =
+			virt_to_page(image->data + (i * PAGE_SIZE));
+	}
 }
 
 static int __init init_vdso(void)
 {
-	struct mips_vdso *vdso;
-
-	vdso_page = alloc_page(GFP_KERNEL);
-	if (!vdso_page)
-		panic("Cannot allocate vdso");
-
-	vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
-	if (!vdso)
-		panic("Cannot map vdso");
-	clear_page(vdso);
-
-	install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn);
-#ifdef CONFIG_32BIT
-	install_trampoline(vdso->signal_trampoline, __NR_sigreturn);
-#else
-	install_trampoline(vdso->n32_rt_signal_trampoline,
-			   __NR_N32_rt_sigreturn);
-	install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn);
-	install_trampoline(vdso->o32_rt_signal_trampoline,
-			   __NR_O32_rt_sigreturn);
+	init_vdso_image(&vdso_image);
+
+#ifdef CONFIG_MIPS32_O32
+	init_vdso_image(&vdso_image_o32);
 #endif
 
-	vunmap(vdso);
+#ifdef CONFIG_MIPS32_N32
+	init_vdso_image(&vdso_image_n32);
+#endif
 
 	return 0;
 }
 subsys_initcall(init_vdso);
 
-static unsigned long vdso_addr(unsigned long start)
+void update_vsyscall(struct timekeeper *tk)
 {
-	unsigned long offset = 0UL;
-
-	if (current->flags & PF_RANDOMIZE) {
-		offset = get_random_int();
-		offset <<= PAGE_SHIFT;
-		if (TASK_IS_32BIT_ADDR)
-			offset &= 0xfffffful;
-		else
-			offset &= 0xffffffful;
+	vdso_data_write_begin(&vdso_data);
+
+	vdso_data.xtime_sec = tk->xtime_sec;
+	vdso_data.xtime_nsec = tk->tkr_mono.xtime_nsec;
+	vdso_data.wall_to_mono_sec = tk->wall_to_monotonic.tv_sec;
+	vdso_data.wall_to_mono_nsec = tk->wall_to_monotonic.tv_nsec;
+	vdso_data.cs_shift = tk->tkr_mono.shift;
+
+	vdso_data.clock_mode = tk->tkr_mono.clock->archdata.vdso_clock_mode;
+	if (vdso_data.clock_mode != VDSO_CLOCK_NONE) {
+		vdso_data.cs_mult = tk->tkr_mono.mult;
+		vdso_data.cs_cycle_last = tk->tkr_mono.cycle_last;
+		vdso_data.cs_mask = tk->tkr_mono.mask;
 	}
 
-	return STACK_TOP + offset;
+	vdso_data_write_end(&vdso_data);
+}
+
+void update_vsyscall_tz(void)
+{
+	if (vdso_data.clock_mode != VDSO_CLOCK_NONE) {
+		vdso_data.tz_minuteswest = sys_tz.tz_minuteswest;
+		vdso_data.tz_dsttime = sys_tz.tz_dsttime;
+	}
 }
 
 int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 {
-	int ret;
-	unsigned long addr;
+	struct mips_vdso_image *image = current->thread.abi->vdso;
 	struct mm_struct *mm = current->mm;
+	unsigned long gic_size, vvar_size, size, base, data_addr, vdso_addr;
+	struct vm_area_struct *vma;
+	struct resource gic_res;
+	int ret;
 
 	down_write(&mm->mmap_sem);
 
-	addr = vdso_addr(mm->start_stack);
+	/*
+	 * Determine total area size. This includes the VDSO data itself, the
+	 * data page, and the GIC user page if present. Always create a mapping
+	 * for the GIC user area if the GIC is present regardless of whether it
+	 * is the current clocksource, in case it comes into use later on. We
+	 * only map a page even though the total area is 64K, as we only need
+	 * the counter registers at the start.
+	 */
+	gic_size = gic_present ? PAGE_SIZE : 0;
+	vvar_size = gic_size + PAGE_SIZE;
+	size = vvar_size + image->size;
+
+	base = get_unmapped_area(NULL, 0, size, 0, 0);
+	if (IS_ERR_VALUE(base)) {
+		ret = base;
+		goto out;
+	}
+
+	data_addr = base + gic_size;
+	vdso_addr = data_addr + PAGE_SIZE;
 
-	addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0);
-	if (IS_ERR_VALUE(addr)) {
-		ret = addr;
-		goto up_fail;
+	vma = _install_special_mapping(mm, base, vvar_size,
+				       VM_READ | VM_MAYREAD,
+				       &vdso_vvar_mapping);
+	if (IS_ERR(vma)) {
+		ret = PTR_ERR(vma);
+		goto out;
 	}
 
-	ret = install_special_mapping(mm, addr, PAGE_SIZE,
-				      VM_READ|VM_EXEC|
-				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
-				      &vdso_page);
+	/* Map GIC user page. */
+	if (gic_size) {
+		ret = gic_get_usm_range(&gic_res);
+		if (ret)
+			goto out;
+
+		ret = io_remap_pfn_range(vma, base,
+					 gic_res.start >> PAGE_SHIFT,
+					 gic_size,
+					 pgprot_noncached(PAGE_READONLY));
+		if (ret)
+			goto out;
+	}
 
+	/* Map data page. */
+	ret = remap_pfn_range(vma, data_addr,
+			      virt_to_phys(&vdso_data) >> PAGE_SHIFT,
+			      PAGE_SIZE, PAGE_READONLY);
 	if (ret)
-		goto up_fail;
+		goto out;
+
+	/* Map VDSO image. */
+	vma = _install_special_mapping(mm, vdso_addr, image->size,
+				       VM_READ | VM_EXEC |
+				       VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+				       &image->mapping);
+	if (IS_ERR(vma)) {
+		ret = PTR_ERR(vma);
+		goto out;
+	}
 
-	mm->context.vdso = (void *)addr;
+	mm->context.vdso = (void *)vdso_addr;
+	ret = 0;
 
-up_fail:
+out:
 	up_write(&mm->mmap_sem);
 	return ret;
 }
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
-	if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
-		return "[vdso]";
-	return NULL;
-}
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 07d32a4aea60..54d653ee17e1 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -17,7 +17,9 @@ OUTPUT_ARCH(mips)
 ENTRY(kernel_entry)
 PHDRS {
 	text PT_LOAD FLAGS(7);	/* RWX */
+#ifndef CONFIG_CAVIUM_OCTEON_SOC
 	note PT_NOTE FLAGS(4);	/* R__ */
+#endif /* CAVIUM_OCTEON_SOC */
 }
 
 #ifdef CONFIG_32BIT
@@ -56,6 +58,7 @@ SECTIONS
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.text.*)
 		*(.fixup)
 		*(.gnu.warning)
@@ -71,7 +74,12 @@ SECTIONS
 		__stop___dbe_table = .;
 	}
 
-	NOTES :text :note
+#ifdef CONFIG_CAVIUM_OCTEON_SOC
+#define NOTES_HEADER
+#else /* CONFIG_CAVIUM_OCTEON_SOC */
+#define NOTES_HEADER :note
+#endif /* CONFIG_CAVIUM_OCTEON_SOC */
+	NOTES :text NOTES_HEADER
 	.dummy : { *(.dummy) } :text
 
 	_sdata = .;			/* Start of data section */
@@ -132,6 +140,11 @@ SECTIONS
 	__appended_dtb = .;
 	/* leave space for appended DTB */
 	. += 0x100000;
+#elif defined(CONFIG_MIPS_ELF_APPENDED_DTB)
+	.appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) {
+		*(.appended_dtb)
+		KEEP(*(.appended_dtb))
+	}
 #endif
 	/*
 	 * Align to 64K in attempt to eliminate holes before the
@@ -181,6 +194,7 @@ SECTIONS
 	DISCARDS
 	/DISCARD/ : {
 		/* ABI crap starts here */
+		*(.MIPS.abiflags)
 		*(.MIPS.options)
 		*(.options)
 		*(.pdr)
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 9067b651c7a2..544ea21bfef9 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -205,11 +205,11 @@ static void layout_sections(struct module *mod, const Elf_Ehdr *hdr,
 			    || s->sh_entsize != ~0UL)
 				continue;
 			s->sh_entsize =
-				get_offset((unsigned long *)&mod->core_size, s);
+				get_offset((unsigned long *)&mod->core_layout.size, s);
 		}
 
 		if (m == 0)
-			mod->core_text_size = mod->core_size;
+			mod->core_layout.text_size = mod->core_layout.size;
 
 	}
 }
@@ -641,7 +641,7 @@ static int vpe_elfload(struct vpe *v)
 		layout_sections(&mod, hdr, sechdrs, secstrings);
 	}
 
-	v->load_addr = alloc_progmem(mod.core_size);
+	v->load_addr = alloc_progmem(mod.core_layout.size);
 	if (!v->load_addr)
 		return -ENOMEM;
 
diff --git a/arch/mips/kvm/callback.c b/arch/mips/kvm/callback.c
index 313c2e37b978..d88aa2173fb0 100644
--- a/arch/mips/kvm/callback.c
+++ b/arch/mips/kvm/callback.c
@@ -11,4 +11,4 @@
 #include <linux/kvm_host.h>
 
 struct kvm_mips_callbacks *kvm_mips_callbacks;
-EXPORT_SYMBOL(kvm_mips_callbacks);
+EXPORT_SYMBOL_GPL(kvm_mips_callbacks);
diff --git a/arch/mips/kvm/dyntrans.c b/arch/mips/kvm/dyntrans.c
index 521121bdebff..f1527a465c1b 100644
--- a/arch/mips/kvm/dyntrans.c
+++ b/arch/mips/kvm/dyntrans.c
@@ -86,10 +86,8 @@ int kvm_mips_trans_mfc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu)
 	} else {
 		mfc0_inst = LW_TEMPLATE;
 		mfc0_inst |= ((rt & 0x1f) << 16);
-		mfc0_inst |=
-		    offsetof(struct mips_coproc,
-			     reg[rd][sel]) + offsetof(struct kvm_mips_commpage,
-						      cop0);
+		mfc0_inst |= offsetof(struct kvm_mips_commpage,
+				      cop0.reg[rd][sel]);
 	}
 
 	if (KVM_GUEST_KSEGX(opc) == KVM_GUEST_KSEG0) {
@@ -123,9 +121,7 @@ int kvm_mips_trans_mtc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu)
 	sel = inst & 0x7;
 
 	mtc0_inst |= ((rt & 0x1f) << 16);
-	mtc0_inst |=
-	    offsetof(struct mips_coproc,
-		     reg[rd][sel]) + offsetof(struct kvm_mips_commpage, cop0);
+	mtc0_inst |= offsetof(struct kvm_mips_commpage, cop0.reg[rd][sel]);
 
 	if (KVM_GUEST_KSEGX(opc) == KVM_GUEST_KSEG0) {
 		kseg0_opc =
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index d5fa3eaf39a1..b37954cc880d 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -20,6 +20,7 @@
 #include <linux/random.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
+#include <asm/cacheops.h>
 #include <asm/cpu-info.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
@@ -29,7 +30,6 @@
 #include <asm/r4kcache.h>
 #define CONFIG_MIPS_MT
 
-#include "opcode.h"
 #include "interrupt.h"
 #include "commpage.h"
 
@@ -1239,21 +1239,20 @@ enum emulation_result kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc,
 			er = EMULATE_FAIL;
 			break;
 
-		case mfmcz_op:
+		case mfmc0_op:
 #ifdef KVM_MIPS_DEBUG_COP0_COUNTERS
 			cop0->stat[MIPS_CP0_STATUS][0]++;
 #endif
-			if (rt != 0) {
+			if (rt != 0)
 				vcpu->arch.gprs[rt] =
 				    kvm_read_c0_guest_status(cop0);
-			}
 			/* EI */
 			if (inst & 0x20) {
-				kvm_debug("[%#lx] mfmcz_op: EI\n",
+				kvm_debug("[%#lx] mfmc0_op: EI\n",
 					  vcpu->arch.pc);
 				kvm_set_c0_guest_status(cop0, ST0_IE);
 			} else {
-				kvm_debug("[%#lx] mfmcz_op: DI\n",
+				kvm_debug("[%#lx] mfmc0_op: DI\n",
 					  vcpu->arch.pc);
 				kvm_clear_c0_guest_status(cop0, ST0_IE);
 			}
@@ -1525,7 +1524,7 @@ int kvm_mips_sync_icache(unsigned long va, struct kvm_vcpu *vcpu)
 	struct kvm *kvm = vcpu->kvm;
 	unsigned long pa;
 	gfn_t gfn;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 
 	gfn = va >> PAGE_SHIFT;
 
@@ -1545,19 +1544,6 @@ int kvm_mips_sync_icache(unsigned long va, struct kvm_vcpu *vcpu)
 	return 0;
 }
 
-#define MIPS_CACHE_OP_INDEX_INV         0x0
-#define MIPS_CACHE_OP_INDEX_LD_TAG      0x1
-#define MIPS_CACHE_OP_INDEX_ST_TAG      0x2
-#define MIPS_CACHE_OP_IMP               0x3
-#define MIPS_CACHE_OP_HIT_INV           0x4
-#define MIPS_CACHE_OP_FILL_WB_INV       0x5
-#define MIPS_CACHE_OP_HIT_HB            0x6
-#define MIPS_CACHE_OP_FETCH_LOCK        0x7
-
-#define MIPS_CACHE_ICACHE               0x0
-#define MIPS_CACHE_DCACHE               0x1
-#define MIPS_CACHE_SEC                  0x3
-
 enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
 					     uint32_t cause,
 					     struct kvm_run *run,
@@ -1581,9 +1567,9 @@ enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
 
 	base = (inst >> 21) & 0x1f;
 	op_inst = (inst >> 16) & 0x1f;
-	offset = inst & 0xffff;
-	cache = (inst >> 16) & 0x3;
-	op = (inst >> 18) & 0x7;
+	offset = (int16_t)inst;
+	cache = op_inst & CacheOp_Cache;
+	op = op_inst & CacheOp_Op;
 
 	va = arch->gprs[base] + offset;
 
@@ -1595,14 +1581,14 @@ enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
 	 * invalidate the caches entirely by stepping through all the
 	 * ways/indexes
 	 */
-	if (op == MIPS_CACHE_OP_INDEX_INV) {
+	if (op == Index_Writeback_Inv) {
 		kvm_debug("@ %#lx/%#lx CACHE (cache: %#x, op: %#x, base[%d]: %#lx, offset: %#x\n",
 			  vcpu->arch.pc, vcpu->arch.gprs[31], cache, op, base,
 			  arch->gprs[base], offset);
 
-		if (cache == MIPS_CACHE_DCACHE)
+		if (cache == Cache_D)
 			r4k_blast_dcache();
-		else if (cache == MIPS_CACHE_ICACHE)
+		else if (cache == Cache_I)
 			r4k_blast_icache();
 		else {
 			kvm_err("%s: unsupported CACHE INDEX operation\n",
@@ -1675,9 +1661,7 @@ enum emulation_result kvm_mips_emulate_cache(uint32_t inst, uint32_t *opc,
 
 skip_fault:
 	/* XXXKYMA: Only a subset of cache ops are supported, used by Linux */
-	if (cache == MIPS_CACHE_DCACHE
-	    && (op == MIPS_CACHE_OP_FILL_WB_INV
-		|| op == MIPS_CACHE_OP_HIT_INV)) {
+	if (op_inst == Hit_Writeback_Inv_D || op_inst == Hit_Invalidate_D) {
 		flush_dcache_line(va);
 
 #ifdef CONFIG_KVM_MIPS_DYN_TRANS
@@ -1687,7 +1671,7 @@ skip_fault:
 		 */
 		kvm_mips_trans_cache_va(inst, opc, vcpu);
 #endif
-	} else if (op == MIPS_CACHE_OP_HIT_INV && cache == MIPS_CACHE_ICACHE) {
+	} else if (op_inst == Hit_Invalidate_I) {
 		flush_dcache_line(va);
 		flush_icache_line(va);
 
@@ -1781,7 +1765,7 @@ enum emulation_result kvm_mips_emulate_syscall(unsigned long cause,
 		kvm_debug("Delivering SYSCALL @ pc %#lx\n", arch->pc);
 
 		kvm_change_c0_guest_cause(cop0, (0xff),
-					  (T_SYSCALL << CAUSEB_EXCCODE));
+					  (EXCCODE_SYS << CAUSEB_EXCCODE));
 
 		/* Set PC to the exception entry point */
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -1828,7 +1812,7 @@ enum emulation_result kvm_mips_emulate_tlbmiss_ld(unsigned long cause,
 	}
 
 	kvm_change_c0_guest_cause(cop0, (0xff),
-				  (T_TLB_LD_MISS << CAUSEB_EXCCODE));
+				  (EXCCODE_TLBL << CAUSEB_EXCCODE));
 
 	/* setup badvaddr, context and entryhi registers for the guest */
 	kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -1874,7 +1858,7 @@ enum emulation_result kvm_mips_emulate_tlbinv_ld(unsigned long cause,
 	}
 
 	kvm_change_c0_guest_cause(cop0, (0xff),
-				  (T_TLB_LD_MISS << CAUSEB_EXCCODE));
+				  (EXCCODE_TLBL << CAUSEB_EXCCODE));
 
 	/* setup badvaddr, context and entryhi registers for the guest */
 	kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -1918,7 +1902,7 @@ enum emulation_result kvm_mips_emulate_tlbmiss_st(unsigned long cause,
 	}
 
 	kvm_change_c0_guest_cause(cop0, (0xff),
-				  (T_TLB_ST_MISS << CAUSEB_EXCCODE));
+				  (EXCCODE_TLBS << CAUSEB_EXCCODE));
 
 	/* setup badvaddr, context and entryhi registers for the guest */
 	kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -1962,7 +1946,7 @@ enum emulation_result kvm_mips_emulate_tlbinv_st(unsigned long cause,
 	}
 
 	kvm_change_c0_guest_cause(cop0, (0xff),
-				  (T_TLB_ST_MISS << CAUSEB_EXCCODE));
+				  (EXCCODE_TLBS << CAUSEB_EXCCODE));
 
 	/* setup badvaddr, context and entryhi registers for the guest */
 	kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -2033,7 +2017,8 @@ enum emulation_result kvm_mips_emulate_tlbmod(unsigned long cause,
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
 	}
 
-	kvm_change_c0_guest_cause(cop0, (0xff), (T_TLB_MOD << CAUSEB_EXCCODE));
+	kvm_change_c0_guest_cause(cop0, (0xff),
+				  (EXCCODE_MOD << CAUSEB_EXCCODE));
 
 	/* setup badvaddr, context and entryhi registers for the guest */
 	kvm_write_c0_guest_badvaddr(cop0, vcpu->arch.host_cp0_badvaddr);
@@ -2068,7 +2053,7 @@ enum emulation_result kvm_mips_emulate_fpu_exc(unsigned long cause,
 	arch->pc = KVM_GUEST_KSEG0 + 0x180;
 
 	kvm_change_c0_guest_cause(cop0, (0xff),
-				  (T_COP_UNUSABLE << CAUSEB_EXCCODE));
+				  (EXCCODE_CPU << CAUSEB_EXCCODE));
 	kvm_change_c0_guest_cause(cop0, (CAUSEF_CE), (0x1 << CAUSEB_CE));
 
 	return EMULATE_DONE;
@@ -2096,7 +2081,7 @@ enum emulation_result kvm_mips_emulate_ri_exc(unsigned long cause,
 		kvm_debug("Delivering RI @ pc %#lx\n", arch->pc);
 
 		kvm_change_c0_guest_cause(cop0, (0xff),
-					  (T_RES_INST << CAUSEB_EXCCODE));
+					  (EXCCODE_RI << CAUSEB_EXCCODE));
 
 		/* Set PC to the exception entry point */
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2131,7 +2116,7 @@ enum emulation_result kvm_mips_emulate_bp_exc(unsigned long cause,
 		kvm_debug("Delivering BP @ pc %#lx\n", arch->pc);
 
 		kvm_change_c0_guest_cause(cop0, (0xff),
-					  (T_BREAK << CAUSEB_EXCCODE));
+					  (EXCCODE_BP << CAUSEB_EXCCODE));
 
 		/* Set PC to the exception entry point */
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2166,7 +2151,7 @@ enum emulation_result kvm_mips_emulate_trap_exc(unsigned long cause,
 		kvm_debug("Delivering TRAP @ pc %#lx\n", arch->pc);
 
 		kvm_change_c0_guest_cause(cop0, (0xff),
-					  (T_TRAP << CAUSEB_EXCCODE));
+					  (EXCCODE_TR << CAUSEB_EXCCODE));
 
 		/* Set PC to the exception entry point */
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2201,7 +2186,7 @@ enum emulation_result kvm_mips_emulate_msafpe_exc(unsigned long cause,
 		kvm_debug("Delivering MSAFPE @ pc %#lx\n", arch->pc);
 
 		kvm_change_c0_guest_cause(cop0, (0xff),
-					  (T_MSAFPE << CAUSEB_EXCCODE));
+					  (EXCCODE_MSAFPE << CAUSEB_EXCCODE));
 
 		/* Set PC to the exception entry point */
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2236,7 +2221,7 @@ enum emulation_result kvm_mips_emulate_fpe_exc(unsigned long cause,
 		kvm_debug("Delivering FPE @ pc %#lx\n", arch->pc);
 
 		kvm_change_c0_guest_cause(cop0, (0xff),
-					  (T_FPE << CAUSEB_EXCCODE));
+					  (EXCCODE_FPE << CAUSEB_EXCCODE));
 
 		/* Set PC to the exception entry point */
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2271,7 +2256,7 @@ enum emulation_result kvm_mips_emulate_msadis_exc(unsigned long cause,
 		kvm_debug("Delivering MSADIS @ pc %#lx\n", arch->pc);
 
 		kvm_change_c0_guest_cause(cop0, (0xff),
-					  (T_MSADIS << CAUSEB_EXCCODE));
+					  (EXCCODE_MSADIS << CAUSEB_EXCCODE));
 
 		/* Set PC to the exception entry point */
 		arch->pc = KVM_GUEST_KSEG0 + 0x180;
@@ -2480,25 +2465,25 @@ enum emulation_result kvm_mips_check_privilege(unsigned long cause,
 
 	if (usermode) {
 		switch (exccode) {
-		case T_INT:
-		case T_SYSCALL:
-		case T_BREAK:
-		case T_RES_INST:
-		case T_TRAP:
-		case T_MSAFPE:
-		case T_FPE:
-		case T_MSADIS:
+		case EXCCODE_INT:
+		case EXCCODE_SYS:
+		case EXCCODE_BP:
+		case EXCCODE_RI:
+		case EXCCODE_TR:
+		case EXCCODE_MSAFPE:
+		case EXCCODE_FPE:
+		case EXCCODE_MSADIS:
 			break;
 
-		case T_COP_UNUSABLE:
+		case EXCCODE_CPU:
 			if (((cause & CAUSEF_CE) >> CAUSEB_CE) == 0)
 				er = EMULATE_PRIV_FAIL;
 			break;
 
-		case T_TLB_MOD:
+		case EXCCODE_MOD:
 			break;
 
-		case T_TLB_LD_MISS:
+		case EXCCODE_TLBL:
 			/*
 			 * We we are accessing Guest kernel space, then send an
 			 * address error exception to the guest
@@ -2507,12 +2492,12 @@ enum emulation_result kvm_mips_check_privilege(unsigned long cause,
 				kvm_debug("%s: LD MISS @ %#lx\n", __func__,
 					  badvaddr);
 				cause &= ~0xff;
-				cause |= (T_ADDR_ERR_LD << CAUSEB_EXCCODE);
+				cause |= (EXCCODE_ADEL << CAUSEB_EXCCODE);
 				er = EMULATE_PRIV_FAIL;
 			}
 			break;
 
-		case T_TLB_ST_MISS:
+		case EXCCODE_TLBS:
 			/*
 			 * We we are accessing Guest kernel space, then send an
 			 * address error exception to the guest
@@ -2521,26 +2506,26 @@ enum emulation_result kvm_mips_check_privilege(unsigned long cause,
 				kvm_debug("%s: ST MISS @ %#lx\n", __func__,
 					  badvaddr);
 				cause &= ~0xff;
-				cause |= (T_ADDR_ERR_ST << CAUSEB_EXCCODE);
+				cause |= (EXCCODE_ADES << CAUSEB_EXCCODE);
 				er = EMULATE_PRIV_FAIL;
 			}
 			break;
 
-		case T_ADDR_ERR_ST:
+		case EXCCODE_ADES:
 			kvm_debug("%s: address error ST @ %#lx\n", __func__,
 				  badvaddr);
 			if ((badvaddr & PAGE_MASK) == KVM_GUEST_COMMPAGE_ADDR) {
 				cause &= ~0xff;
-				cause |= (T_TLB_ST_MISS << CAUSEB_EXCCODE);
+				cause |= (EXCCODE_TLBS << CAUSEB_EXCCODE);
 			}
 			er = EMULATE_PRIV_FAIL;
 			break;
-		case T_ADDR_ERR_LD:
+		case EXCCODE_ADEL:
 			kvm_debug("%s: address error LD @ %#lx\n", __func__,
 				  badvaddr);
 			if ((badvaddr & PAGE_MASK) == KVM_GUEST_COMMPAGE_ADDR) {
 				cause &= ~0xff;
-				cause |= (T_TLB_LD_MISS << CAUSEB_EXCCODE);
+				cause |= (EXCCODE_TLBL << CAUSEB_EXCCODE);
 			}
 			er = EMULATE_PRIV_FAIL;
 			break;
@@ -2583,13 +2568,12 @@ enum emulation_result kvm_mips_handle_tlbmiss(unsigned long cause,
 	 * an entry into the guest TLB.
 	 */
 	index = kvm_mips_guest_tlb_lookup(vcpu,
-					  (va & VPN2_MASK) |
-					  (kvm_read_c0_guest_entryhi
-					   (vcpu->arch.cop0) & ASID_MASK));
+		      (va & VPN2_MASK) |
+		      (kvm_read_c0_guest_entryhi(vcpu->arch.cop0) & ASID_MASK));
 	if (index < 0) {
-		if (exccode == T_TLB_LD_MISS) {
+		if (exccode == EXCCODE_TLBL) {
 			er = kvm_mips_emulate_tlbmiss_ld(cause, opc, run, vcpu);
-		} else if (exccode == T_TLB_ST_MISS) {
+		} else if (exccode == EXCCODE_TLBS) {
 			er = kvm_mips_emulate_tlbmiss_st(cause, opc, run, vcpu);
 		} else {
 			kvm_err("%s: invalid exc code: %d\n", __func__,
@@ -2604,10 +2588,10 @@ enum emulation_result kvm_mips_handle_tlbmiss(unsigned long cause,
 		 * exception to the guest
 		 */
 		if (!TLB_IS_VALID(*tlb, va)) {
-			if (exccode == T_TLB_LD_MISS) {
+			if (exccode == EXCCODE_TLBL) {
 				er = kvm_mips_emulate_tlbinv_ld(cause, opc, run,
 								vcpu);
-			} else if (exccode == T_TLB_ST_MISS) {
+			} else if (exccode == EXCCODE_TLBS) {
 				er = kvm_mips_emulate_tlbinv_st(cause, opc, run,
 								vcpu);
 			} else {
diff --git a/arch/mips/kvm/interrupt.c b/arch/mips/kvm/interrupt.c
index 9b4445940c2b..95f790663b0c 100644
--- a/arch/mips/kvm/interrupt.c
+++ b/arch/mips/kvm/interrupt.c
@@ -128,7 +128,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
 		    && (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
 		    && (kvm_read_c0_guest_status(cop0) & IE_IRQ5)) {
 			allowed = 1;
-			exccode = T_INT;
+			exccode = EXCCODE_INT;
 		}
 		break;
 
@@ -137,7 +137,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
 		    && (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
 		    && (kvm_read_c0_guest_status(cop0) & IE_IRQ0)) {
 			allowed = 1;
-			exccode = T_INT;
+			exccode = EXCCODE_INT;
 		}
 		break;
 
@@ -146,7 +146,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
 		    && (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
 		    && (kvm_read_c0_guest_status(cop0) & IE_IRQ1)) {
 			allowed = 1;
-			exccode = T_INT;
+			exccode = EXCCODE_INT;
 		}
 		break;
 
@@ -155,7 +155,7 @@ int kvm_mips_irq_deliver_cb(struct kvm_vcpu *vcpu, unsigned int priority,
 		    && (!(kvm_read_c0_guest_status(cop0) & (ST0_EXL | ST0_ERL)))
 		    && (kvm_read_c0_guest_status(cop0) & IE_IRQ2)) {
 			allowed = 1;
-			exccode = T_INT;
+			exccode = EXCCODE_INT;
 		}
 		break;
 
diff --git a/arch/mips/kvm/locore.S b/arch/mips/kvm/locore.S
index c567240386a0..81687ab1b523 100644
--- a/arch/mips/kvm/locore.S
+++ b/arch/mips/kvm/locore.S
@@ -36,14 +36,6 @@
 #define PT_HOST_USERLOCAL   PT_EPC
 
 #define CP0_DDATA_LO        $28,3
-#define CP0_CONFIG3         $16,3
-#define CP0_CONFIG5         $16,5
-#define CP0_EBASE           $15,1
-
-#define CP0_INTCTL          $12,1
-#define CP0_SRSCTL          $12,2
-#define CP0_SRSMAP          $12,3
-#define CP0_HWRENA          $7,0
 
 /* Resume Flags */
 #define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
@@ -165,9 +157,11 @@ FEXPORT(__kvm_mips_vcpu_run)
 
 FEXPORT(__kvm_mips_load_asid)
 	/* Set the ASID for the Guest Kernel */
-	INT_SLL	t0, t0, 1	/* with kseg0 @ 0x40000000, kernel */
-			        /* addresses shift to 0x80000000 */
-	bltz	t0, 1f		/* If kernel */
+	PTR_L	t0, VCPU_COP0(k1)
+	LONG_L	t0, COP0_STATUS(t0)
+	andi	t0, KSU_USER | ST0_ERL | ST0_EXL
+	xori	t0, KSU_USER
+	bnez	t0, 1f		/* If kernel */
 	 INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID  /* (BD)  */
 	INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID    /* else user */
 1:
@@ -341,7 +335,7 @@ NESTED (MIPSX(GuestException), CALLFRAME_SIZ, ra)
 
 	/* Now restore the host state just enough to run the handlers */
 
-	/* Swtich EBASE to the one used by Linux */
+	/* Switch EBASE to the one used by Linux */
 	/* load up the host EBASE */
 	mfc0	v0, CP0_STATUS
 
@@ -482,9 +476,11 @@ __kvm_mips_return_to_guest:
 	mtc0	t0, CP0_EPC
 
 	/* Set the ASID for the Guest Kernel */
-	INT_SLL	t0, t0, 1	/* with kseg0 @ 0x40000000, kernel */
-				/* addresses shift to 0x80000000 */
-	bltz	t0, 1f		/* If kernel */
+	PTR_L	t0, VCPU_COP0(k1)
+	LONG_L	t0, COP0_STATUS(t0)
+	andi	t0, KSU_USER | ST0_ERL | ST0_EXL
+	xori	t0, KSU_USER
+	bnez	t0, 1f		/* If kernel */
 	 INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID  /* (BD)  */
 	INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID    /* else user */
 1:
@@ -494,11 +490,11 @@ __kvm_mips_return_to_guest:
 	REG_ADDU t3, t1, t2
 	LONG_L	k0, (t3)
 	andi	k0, k0, 0xff
-	mtc0	k0,CP0_ENTRYHI
+	mtc0	k0, CP0_ENTRYHI
 	ehb
 
 	/* Disable RDHWR access */
-	mtc0    zero,  CP0_HWRENA
+	mtc0	zero, CP0_HWRENA
 
 	/* load the guest context from VCPU and return */
 	LONG_L	$0, VCPU_R0(k1)
@@ -610,11 +606,11 @@ __kvm_mips_return_to_host:
 
 	/* Restore RDHWR access */
 	PTR_LI	k0, 0x2000000F
-	mtc0	k0,  CP0_HWRENA
+	mtc0	k0, CP0_HWRENA
 
 	/* Restore RA, which is the address we will return to */
-	LONG_L  ra, PT_R31(k1)
-	j       ra
+	LONG_L	ra, PT_R31(k1)
+	j	ra
 	 nop
 
 VECTOR_END(MIPSX(GuestExceptionEnd))
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index 49ff3bfc007e..70ef1a43c114 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -229,7 +229,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 			    kzalloc(npages * sizeof(unsigned long), GFP_KERNEL);
 
 			if (!kvm->arch.guest_pmap) {
-				kvm_err("Failed to allocate guest PMAP");
+				kvm_err("Failed to allocate guest PMAP\n");
 				return;
 			}
 
@@ -279,7 +279,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 
 	if (!gebase) {
 		err = -ENOMEM;
-		goto out_free_cpu;
+		goto out_uninit_cpu;
 	}
 	kvm_debug("Allocated %d bytes for KVM Exception Handlers @ %p\n",
 		  ALIGN(size, PAGE_SIZE), gebase);
@@ -343,6 +343,9 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 out_free_gebase:
 	kfree(gebase);
 
+out_uninit_cpu:
+	kvm_vcpu_uninit(vcpu);
+
 out_free_cpu:
 	kfree(vcpu);
 
@@ -442,8 +445,8 @@ int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 
 	dvcpu->arch.wait = 0;
 
-	if (waitqueue_active(&dvcpu->wq))
-		wake_up_interruptible(&dvcpu->wq);
+	if (swait_active(&dvcpu->wq))
+		swake_up(&dvcpu->wq);
 
 	return 0;
 }
@@ -699,7 +702,7 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu,
 	} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
 		void __user *uaddr = (void __user *)(long)reg->addr;
 
-		return copy_to_user(uaddr, vs, 16);
+		return copy_to_user(uaddr, vs, 16) ? -EFAULT : 0;
 	} else {
 		return -EINVAL;
 	}
@@ -729,7 +732,7 @@ static int kvm_mips_set_reg(struct kvm_vcpu *vcpu,
 	} else if ((reg->id & KVM_REG_SIZE_MASK) == KVM_REG_SIZE_U128) {
 		void __user *uaddr = (void __user *)(long)reg->addr;
 
-		return copy_from_user(vs, uaddr, 16);
+		return copy_from_user(vs, uaddr, 16) ? -EFAULT : 0;
 	} else {
 		return -EINVAL;
 	}
@@ -1171,8 +1174,8 @@ static void kvm_mips_comparecount_func(unsigned long data)
 	kvm_mips_callbacks->queue_timer_int(vcpu);
 
 	vcpu->arch.wait = 0;
-	if (waitqueue_active(&vcpu->wq))
-		wake_up_interruptible(&vcpu->wq);
+	if (swait_active(&vcpu->wq))
+		swake_up(&vcpu->wq);
 }
 
 /* low level hrtimer wake routine */
@@ -1261,8 +1264,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	}
 
 	switch (exccode) {
-	case T_INT:
-		kvm_debug("[%d]T_INT @ %p\n", vcpu->vcpu_id, opc);
+	case EXCCODE_INT:
+		kvm_debug("[%d]EXCCODE_INT @ %p\n", vcpu->vcpu_id, opc);
 
 		++vcpu->stat.int_exits;
 		trace_kvm_exit(vcpu, INT_EXITS);
@@ -1273,8 +1276,8 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		ret = RESUME_GUEST;
 		break;
 
-	case T_COP_UNUSABLE:
-		kvm_debug("T_COP_UNUSABLE: @ PC: %p\n", opc);
+	case EXCCODE_CPU:
+		kvm_debug("EXCCODE_CPU: @ PC: %p\n", opc);
 
 		++vcpu->stat.cop_unusable_exits;
 		trace_kvm_exit(vcpu, COP_UNUSABLE_EXITS);
@@ -1284,13 +1287,13 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			ret = RESUME_HOST;
 		break;
 
-	case T_TLB_MOD:
+	case EXCCODE_MOD:
 		++vcpu->stat.tlbmod_exits;
 		trace_kvm_exit(vcpu, TLBMOD_EXITS);
 		ret = kvm_mips_callbacks->handle_tlb_mod(vcpu);
 		break;
 
-	case T_TLB_ST_MISS:
+	case EXCCODE_TLBS:
 		kvm_debug("TLB ST fault:  cause %#x, status %#lx, PC: %p, BadVaddr: %#lx\n",
 			  cause, kvm_read_c0_guest_status(vcpu->arch.cop0), opc,
 			  badvaddr);
@@ -1300,7 +1303,7 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		ret = kvm_mips_callbacks->handle_tlb_st_miss(vcpu);
 		break;
 
-	case T_TLB_LD_MISS:
+	case EXCCODE_TLBL:
 		kvm_debug("TLB LD fault: cause %#x, PC: %p, BadVaddr: %#lx\n",
 			  cause, opc, badvaddr);
 
@@ -1309,55 +1312,55 @@ int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		ret = kvm_mips_callbacks->handle_tlb_ld_miss(vcpu);
 		break;
 
-	case T_ADDR_ERR_ST:
+	case EXCCODE_ADES:
 		++vcpu->stat.addrerr_st_exits;
 		trace_kvm_exit(vcpu, ADDRERR_ST_EXITS);
 		ret = kvm_mips_callbacks->handle_addr_err_st(vcpu);
 		break;
 
-	case T_ADDR_ERR_LD:
+	case EXCCODE_ADEL:
 		++vcpu->stat.addrerr_ld_exits;
 		trace_kvm_exit(vcpu, ADDRERR_LD_EXITS);
 		ret = kvm_mips_callbacks->handle_addr_err_ld(vcpu);
 		break;
 
-	case T_SYSCALL:
+	case EXCCODE_SYS:
 		++vcpu->stat.syscall_exits;
 		trace_kvm_exit(vcpu, SYSCALL_EXITS);
 		ret = kvm_mips_callbacks->handle_syscall(vcpu);
 		break;
 
-	case T_RES_INST:
+	case EXCCODE_RI:
 		++vcpu->stat.resvd_inst_exits;
 		trace_kvm_exit(vcpu, RESVD_INST_EXITS);
 		ret = kvm_mips_callbacks->handle_res_inst(vcpu);
 		break;
 
-	case T_BREAK:
+	case EXCCODE_BP:
 		++vcpu->stat.break_inst_exits;
 		trace_kvm_exit(vcpu, BREAK_INST_EXITS);
 		ret = kvm_mips_callbacks->handle_break(vcpu);
 		break;
 
-	case T_TRAP:
+	case EXCCODE_TR:
 		++vcpu->stat.trap_inst_exits;
 		trace_kvm_exit(vcpu, TRAP_INST_EXITS);
 		ret = kvm_mips_callbacks->handle_trap(vcpu);
 		break;
 
-	case T_MSAFPE:
+	case EXCCODE_MSAFPE:
 		++vcpu->stat.msa_fpe_exits;
 		trace_kvm_exit(vcpu, MSA_FPE_EXITS);
 		ret = kvm_mips_callbacks->handle_msa_fpe(vcpu);
 		break;
 
-	case T_FPE:
+	case EXCCODE_FPE:
 		++vcpu->stat.fpe_exits;
 		trace_kvm_exit(vcpu, FPE_EXITS);
 		ret = kvm_mips_callbacks->handle_fpe(vcpu);
 		break;
 
-	case T_MSADIS:
+	case EXCCODE_MSADIS:
 		++vcpu->stat.msa_disabled_exits;
 		trace_kvm_exit(vcpu, MSA_DISABLED_EXITS);
 		ret = kvm_mips_callbacks->handle_msa_disabled(vcpu);
@@ -1617,7 +1620,7 @@ static struct notifier_block kvm_mips_csr_die_notifier = {
 	.notifier_call = kvm_mips_csr_die_notify,
 };
 
-int __init kvm_mips_init(void)
+static int __init kvm_mips_init(void)
 {
 	int ret;
 
@@ -1643,7 +1646,7 @@ int __init kvm_mips_init(void)
 	return 0;
 }
 
-void __exit kvm_mips_exit(void)
+static void __exit kvm_mips_exit(void)
 {
 	kvm_exit();
 
diff --git a/arch/mips/kvm/opcode.h b/arch/mips/kvm/opcode.h
deleted file mode 100644
index 03a6ae84c7df..000000000000
--- a/arch/mips/kvm/opcode.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012  MIPS Technologies, Inc.  All rights reserved.
- * Authors: Sanjay Lal <sanjayl@kymasys.com>
- */
-
-/* Define opcode values not defined in <asm/isnt.h> */
-
-#ifndef __KVM_MIPS_OPCODE_H__
-#define __KVM_MIPS_OPCODE_H__
-
-/* COP0 Ops */
-#define mfmcz_op	0x0b	/* 01011 */
-#define wrpgpr_op	0x0e	/* 01110 */
-
-/* COP0 opcodes (only if COP0 and CO=1): */
-#define wait_op		0x20	/* 100000 */
-
-#endif /* __KVM_MIPS_OPCODE_H__ */
diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c
index aed0ac2a4972..e0e1d0a611fc 100644
--- a/arch/mips/kvm/tlb.c
+++ b/arch/mips/kvm/tlb.c
@@ -35,17 +35,17 @@
 #define PRIx64 "llx"
 
 atomic_t kvm_mips_instance;
-EXPORT_SYMBOL(kvm_mips_instance);
+EXPORT_SYMBOL_GPL(kvm_mips_instance);
 
 /* These function pointers are initialized once the KVM module is loaded */
-pfn_t (*kvm_mips_gfn_to_pfn)(struct kvm *kvm, gfn_t gfn);
-EXPORT_SYMBOL(kvm_mips_gfn_to_pfn);
+kvm_pfn_t (*kvm_mips_gfn_to_pfn)(struct kvm *kvm, gfn_t gfn);
+EXPORT_SYMBOL_GPL(kvm_mips_gfn_to_pfn);
 
-void (*kvm_mips_release_pfn_clean)(pfn_t pfn);
-EXPORT_SYMBOL(kvm_mips_release_pfn_clean);
+void (*kvm_mips_release_pfn_clean)(kvm_pfn_t pfn);
+EXPORT_SYMBOL_GPL(kvm_mips_release_pfn_clean);
 
-bool (*kvm_mips_is_error_pfn)(pfn_t pfn);
-EXPORT_SYMBOL(kvm_mips_is_error_pfn);
+bool (*kvm_mips_is_error_pfn)(kvm_pfn_t pfn);
+EXPORT_SYMBOL_GPL(kvm_mips_is_error_pfn);
 
 uint32_t kvm_mips_get_kernel_asid(struct kvm_vcpu *vcpu)
 {
@@ -111,7 +111,7 @@ void kvm_mips_dump_host_tlbs(void)
 	mtc0_tlbw_hazard();
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(kvm_mips_dump_host_tlbs);
+EXPORT_SYMBOL_GPL(kvm_mips_dump_host_tlbs);
 
 void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu)
 {
@@ -139,12 +139,12 @@ void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu)
 			 (tlb.tlb_lo1 >> 3) & 7, tlb.tlb_mask);
 	}
 }
-EXPORT_SYMBOL(kvm_mips_dump_guest_tlbs);
+EXPORT_SYMBOL_GPL(kvm_mips_dump_guest_tlbs);
 
 static int kvm_mips_map_page(struct kvm *kvm, gfn_t gfn)
 {
 	int srcu_idx, err = 0;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 
 	if (kvm->arch.guest_pmap[gfn] != KVM_INVALID_PAGE)
 		return 0;
@@ -191,7 +191,7 @@ unsigned long kvm_mips_translate_guest_kseg0_to_hpa(struct kvm_vcpu *vcpu,
 
 	return (kvm->arch.guest_pmap[gfn] << PAGE_SHIFT) + offset;
 }
-EXPORT_SYMBOL(kvm_mips_translate_guest_kseg0_to_hpa);
+EXPORT_SYMBOL_GPL(kvm_mips_translate_guest_kseg0_to_hpa);
 
 /* XXXKYMA: Must be called with interrupts disabled */
 /* set flush_dcache_mask == 0 if no dcache flush required */
@@ -262,7 +262,7 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr,
 				    struct kvm_vcpu *vcpu)
 {
 	gfn_t gfn;
-	pfn_t pfn0, pfn1;
+	kvm_pfn_t pfn0, pfn1;
 	unsigned long vaddr = 0;
 	unsigned long entryhi = 0, entrylo0 = 0, entrylo1 = 0;
 	int even;
@@ -308,12 +308,12 @@ int kvm_mips_handle_kseg0_tlb_fault(unsigned long badvaddr,
 	return kvm_mips_host_tlb_write(vcpu, entryhi, entrylo0, entrylo1,
 				       flush_dcache_mask);
 }
-EXPORT_SYMBOL(kvm_mips_handle_kseg0_tlb_fault);
+EXPORT_SYMBOL_GPL(kvm_mips_handle_kseg0_tlb_fault);
 
 int kvm_mips_handle_commpage_tlb_fault(unsigned long badvaddr,
 	struct kvm_vcpu *vcpu)
 {
-	pfn_t pfn0, pfn1;
+	kvm_pfn_t pfn0, pfn1;
 	unsigned long flags, old_entryhi = 0, vaddr = 0;
 	unsigned long entrylo0 = 0, entrylo1 = 0;
 
@@ -351,7 +351,7 @@ int kvm_mips_handle_commpage_tlb_fault(unsigned long badvaddr,
 
 	return 0;
 }
-EXPORT_SYMBOL(kvm_mips_handle_commpage_tlb_fault);
+EXPORT_SYMBOL_GPL(kvm_mips_handle_commpage_tlb_fault);
 
 int kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 					 struct kvm_mips_tlb *tlb,
@@ -360,7 +360,7 @@ int kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 {
 	unsigned long entryhi = 0, entrylo0 = 0, entrylo1 = 0;
 	struct kvm *kvm = vcpu->kvm;
-	pfn_t pfn0, pfn1;
+	kvm_pfn_t pfn0, pfn1;
 
 	if ((tlb->tlb_hi & VPN2_MASK) == 0) {
 		pfn0 = 0;
@@ -401,7 +401,7 @@ int kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu,
 	return kvm_mips_host_tlb_write(vcpu, entryhi, entrylo0, entrylo1,
 				       tlb->tlb_mask);
 }
-EXPORT_SYMBOL(kvm_mips_handle_mapped_seg_tlb_fault);
+EXPORT_SYMBOL_GPL(kvm_mips_handle_mapped_seg_tlb_fault);
 
 int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi)
 {
@@ -422,7 +422,7 @@ int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi)
 
 	return index;
 }
-EXPORT_SYMBOL(kvm_mips_guest_tlb_lookup);
+EXPORT_SYMBOL_GPL(kvm_mips_guest_tlb_lookup);
 
 int kvm_mips_host_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long vaddr)
 {
@@ -458,7 +458,7 @@ int kvm_mips_host_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long vaddr)
 
 	return idx;
 }
-EXPORT_SYMBOL(kvm_mips_host_tlb_lookup);
+EXPORT_SYMBOL_GPL(kvm_mips_host_tlb_lookup);
 
 int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long va)
 {
@@ -505,44 +505,7 @@ int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long va)
 
 	return 0;
 }
-EXPORT_SYMBOL(kvm_mips_host_tlb_inv);
-
-/* XXXKYMA: Fix Guest USER/KERNEL no longer share the same ASID */
-int kvm_mips_host_tlb_inv_index(struct kvm_vcpu *vcpu, int index)
-{
-	unsigned long flags, old_entryhi;
-
-	if (index >= current_cpu_data.tlbsize)
-		BUG();
-
-	local_irq_save(flags);
-
-	old_entryhi = read_c0_entryhi();
-
-	write_c0_entryhi(UNIQUE_ENTRYHI(index));
-	mtc0_tlbw_hazard();
-
-	write_c0_index(index);
-	mtc0_tlbw_hazard();
-
-	write_c0_entrylo0(0);
-	mtc0_tlbw_hazard();
-
-	write_c0_entrylo1(0);
-	mtc0_tlbw_hazard();
-
-	tlb_write_indexed();
-	mtc0_tlbw_hazard();
-	tlbw_use_hazard();
-
-	write_c0_entryhi(old_entryhi);
-	mtc0_tlbw_hazard();
-	tlbw_use_hazard();
-
-	local_irq_restore(flags);
-
-	return 0;
-}
+EXPORT_SYMBOL_GPL(kvm_mips_host_tlb_inv);
 
 void kvm_mips_flush_host_tlb(int skip_kseg0)
 {
@@ -594,7 +557,7 @@ void kvm_mips_flush_host_tlb(int skip_kseg0)
 
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(kvm_mips_flush_host_tlb);
+EXPORT_SYMBOL_GPL(kvm_mips_flush_host_tlb);
 
 void kvm_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu,
 			     struct kvm_vcpu *vcpu)
@@ -642,7 +605,7 @@ void kvm_local_flush_tlb_all(void)
 
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(kvm_local_flush_tlb_all);
+EXPORT_SYMBOL_GPL(kvm_local_flush_tlb_all);
 
 /**
  * kvm_mips_migrate_count() - Migrate timer.
@@ -669,12 +632,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 	kvm_debug("%s: vcpu %p, cpu: %d\n", __func__, vcpu, cpu);
 
-	/* Alocate new kernel and user ASIDs if needed */
+	/* Allocate new kernel and user ASIDs if needed */
 
 	local_irq_save(flags);
 
-	if (((vcpu->arch.
-	      guest_kernel_asid[cpu] ^ asid_cache(cpu)) & ASID_VERSION_MASK)) {
+	if ((vcpu->arch.guest_kernel_asid[cpu] ^ asid_cache(cpu)) &
+							ASID_VERSION_MASK) {
 		kvm_get_new_mmu_context(&vcpu->arch.guest_kernel_mm, cpu, vcpu);
 		vcpu->arch.guest_kernel_asid[cpu] =
 		    vcpu->arch.guest_kernel_mm.context.asid[cpu];
@@ -739,7 +702,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	local_irq_restore(flags);
 
 }
-EXPORT_SYMBOL(kvm_arch_vcpu_load);
+EXPORT_SYMBOL_GPL(kvm_arch_vcpu_load);
 
 /* ASID can change if another task is scheduled during preemption */
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
@@ -768,7 +731,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(kvm_arch_vcpu_put);
+EXPORT_SYMBOL_GPL(kvm_arch_vcpu_put);
 
 uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu)
 {
@@ -813,4 +776,4 @@ uint32_t kvm_get_inst(uint32_t *opc, struct kvm_vcpu *vcpu)
 
 	return inst;
 }
-EXPORT_SYMBOL(kvm_get_inst);
+EXPORT_SYMBOL_GPL(kvm_get_inst);
diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c
index d836ed5b0bc7..c4038d2a724c 100644
--- a/arch/mips/kvm/trap_emul.c
+++ b/arch/mips/kvm/trap_emul.c
@@ -16,7 +16,6 @@
 
 #include <linux/kvm_host.h>
 
-#include "opcode.h"
 #include "interrupt.h"
 
 static gpa_t kvm_trap_emul_gva_to_gpa_cb(gva_t gva)
@@ -501,7 +500,7 @@ static int kvm_trap_emul_vcpu_setup(struct kvm_vcpu *vcpu)
 	kvm_write_c0_guest_config7(cop0, (MIPS_CONF7_WII) | (1 << 10));
 
 	/*
-	 * Setup IntCtl defaults, compatibilty mode for timer interrupts (HW5)
+	 * Setup IntCtl defaults, compatibility mode for timer interrupts (HW5)
 	 */
 	kvm_write_c0_guest_intctl(cop0, 0xFC000000);
 
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index 3fc2e6d70c77..a0706fd4ce0a 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -99,6 +99,23 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (unlikely(!clk_good(clk)))
+		return 0;
+	if (clk->rates && *clk->rates) {
+		unsigned long *r = clk->rates;
+
+		while (*r && (*r != rate))
+			r++;
+		if (!*r) {
+			return clk->rate;
+		}
+	}
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
 int clk_enable(struct clk *clk)
 {
 	if (unlikely(!clk_good(clk)))
diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h
index 77e4bdb1fe8c..7376ce817eda 100644
--- a/arch/mips/lantiq/clk.h
+++ b/arch/mips/lantiq/clk.h
@@ -31,13 +31,18 @@
 #define CLOCK_240M	240000000
 #define CLOCK_250M	250000000
 #define CLOCK_266M	266666666
+#define CLOCK_288M	288888888
 #define CLOCK_300M	300000000
 #define CLOCK_333M	333333333
+#define CLOCK_360M	360000000
 #define CLOCK_393M	393215332
 #define CLOCK_400M	400000000
+#define CLOCK_432M	432000000
 #define CLOCK_450M	450000000
 #define CLOCK_500M	500000000
 #define CLOCK_600M	600000000
+#define CLOCK_666M	666666666
+#define CLOCK_720M	720000000
 
 /* clock out speeds */
 #define CLOCK_32_768K	32768
@@ -80,4 +85,12 @@ extern unsigned long ltq_vr9_cpu_hz(void);
 extern unsigned long ltq_vr9_fpi_hz(void);
 extern unsigned long ltq_vr9_pp32_hz(void);
 
+extern unsigned long ltq_ar10_cpu_hz(void);
+extern unsigned long ltq_ar10_fpi_hz(void);
+extern unsigned long ltq_ar10_pp32_hz(void);
+
+extern unsigned long ltq_grx390_cpu_hz(void);
+extern unsigned long ltq_grx390_fpi_hz(void);
+extern unsigned long ltq_grx390_pp32_hz(void);
+
 #endif
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index 2c218c3bbca5..2e7f60c9fc5d 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -369,8 +369,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 		if (of_address_to_resource(node, i, &res))
 			panic("Failed to get icu memory range");
 
-		if (request_mem_region(res.start, resource_size(&res),
-					res.name) < 0)
+		if (!request_mem_region(res.start, resource_size(&res),
+					res.name))
 			pr_err("Failed to request icu memory");
 
 		ltq_icu_membase[i] = ioremap_nocache(res.start,
@@ -449,8 +449,8 @@ int __init icu_of_init(struct device_node *node, struct device_node *parent)
 		if (ret != exin_avail)
 			panic("failed to load external irq resources");
 
-		if (request_mem_region(res.start, resource_size(&res),
-							res.name) < 0)
+		if (!request_mem_region(res.start, resource_size(&res),
+							res.name))
 			pr_err("Failed to request eiu memory");
 
 		ltq_eiu_membase = ioremap_nocache(res.start,
diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c
index 0db099ecc016..297bcaa6b5d3 100644
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
@@ -77,8 +77,6 @@ void __init plat_mem_setup(void)
 	 * parsed resulting in our memory appearing
 	 */
 	__dt_setup_arch(__dtb_start);
-
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 }
 
 void __init device_tree_init(void)
diff --git a/arch/mips/lantiq/xway/clk.c b/arch/mips/lantiq/xway/clk.c
index 8750dc0a1bf6..07f6d5b0b65e 100644
--- a/arch/mips/lantiq/xway/clk.c
+++ b/arch/mips/lantiq/xway/clk.c
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/io.h>
@@ -25,9 +26,9 @@ static unsigned int ram_clocks[] = {
 /* legacy xway clock */
 #define CGU_SYS			0x10
 
-/* vr9 clock */
-#define CGU_SYS_VR9		0x0c
-#define CGU_IF_CLK_VR9		0x24
+/* vr9, ar10/grx390 clock */
+#define CGU_SYS_XRX		0x0c
+#define CGU_IF_CLK_AR10		0x24
 
 unsigned long ltq_danube_fpi_hz(void)
 {
@@ -87,8 +88,9 @@ unsigned long ltq_ar9_fpi_hz(void)
 	unsigned long sys = ltq_ar9_sys_hz();
 
 	if (ltq_cgu_r32(CGU_SYS) & BIT(0))
-		return sys;
-	return sys >> 1;
+		return sys / 3;
+	else
+		return sys / 2;
 }
 
 unsigned long ltq_ar9_cpu_hz(void)
@@ -104,7 +106,7 @@ unsigned long ltq_vr9_cpu_hz(void)
 	unsigned int cpu_sel;
 	unsigned long clk;
 
-	cpu_sel = (ltq_cgu_r32(CGU_SYS_VR9) >> 4) & 0xf;
+	cpu_sel = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0xf;
 
 	switch (cpu_sel) {
 	case 0:
@@ -145,7 +147,7 @@ unsigned long ltq_vr9_fpi_hz(void)
 	unsigned long clk;
 
 	cpu_clk = ltq_vr9_cpu_hz();
-	ocp_sel = ltq_cgu_r32(CGU_SYS_VR9) & 0x3;
+	ocp_sel = ltq_cgu_r32(CGU_SYS_XRX) & 0x3;
 
 	switch (ocp_sel) {
 	case 0:
@@ -174,15 +176,18 @@ unsigned long ltq_vr9_fpi_hz(void)
 
 unsigned long ltq_vr9_pp32_hz(void)
 {
-	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 3;
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
 	unsigned long clk;
 
 	switch (clksys) {
+	case 0:
+		clk = CLOCK_500M;
+		break;
 	case 1:
-		clk = CLOCK_450M;
+		clk = CLOCK_432M;
 		break;
 	case 2:
-		clk = CLOCK_300M;
+		clk = CLOCK_288M;
 		break;
 	default:
 		clk = CLOCK_500M;
@@ -191,3 +196,158 @@ unsigned long ltq_vr9_pp32_hz(void)
 
 	return clk;
 }
+
+unsigned long ltq_ar10_cpu_hz(void)
+{
+	unsigned int clksys;
+	int cpu_fs = (ltq_cgu_r32(CGU_SYS_XRX) >> 8) & 0x1;
+	int freq_div = (ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7;
+
+	switch (cpu_fs) {
+	case 0:
+		clksys = CLOCK_500M;
+		break;
+	case 1:
+		clksys = CLOCK_600M;
+		break;
+	default:
+		clksys = CLOCK_500M;
+		break;
+	}
+
+	switch (freq_div) {
+	case 0:
+		return clksys;
+	case 1:
+		return clksys >> 1;
+	case 2:
+		return clksys >> 2;
+	default:
+		return clksys;
+	}
+}
+
+unsigned long ltq_ar10_fpi_hz(void)
+{
+	int freq_fpi = (ltq_cgu_r32(CGU_IF_CLK_AR10) >> 25) & 0xf;
+
+	switch (freq_fpi) {
+	case 1:
+		return CLOCK_300M;
+	case 5:
+		return CLOCK_250M;
+	case 2:
+		return CLOCK_150M;
+	case 6:
+		return CLOCK_125M;
+
+	default:
+		return CLOCK_125M;
+	}
+}
+
+unsigned long ltq_ar10_pp32_hz(void)
+{
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
+	unsigned long clk;
+
+	switch (clksys) {
+	case 1:
+		clk = CLOCK_250M;
+		break;
+	case 4:
+		clk = CLOCK_400M;
+		break;
+	default:
+		clk = CLOCK_250M;
+		break;
+	}
+
+	return clk;
+}
+
+unsigned long ltq_grx390_cpu_hz(void)
+{
+	unsigned int clksys;
+	int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3);
+	int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX) >> 4) & 0x7);
+
+	switch (cpu_fs) {
+	case 0:
+		clksys = CLOCK_600M;
+		break;
+	case 1:
+		clksys = CLOCK_666M;
+		break;
+	case 2:
+		clksys = CLOCK_720M;
+		break;
+	default:
+		clksys = CLOCK_600M;
+		break;
+	}
+
+	switch (freq_div) {
+	case 0:
+		return clksys;
+	case 1:
+		return clksys >> 1;
+	case 2:
+		return clksys >> 2;
+	default:
+		return clksys;
+	}
+}
+
+unsigned long ltq_grx390_fpi_hz(void)
+{
+	/* fpi clock is derived from ddr_clk */
+	unsigned int clksys;
+	int cpu_fs = ((ltq_cgu_r32(CGU_SYS_XRX) >> 9) & 0x3);
+	int freq_div = ((ltq_cgu_r32(CGU_SYS_XRX)) & 0x7);
+	switch (cpu_fs) {
+	case 0:
+		clksys = CLOCK_600M;
+		break;
+	case 1:
+		clksys = CLOCK_666M;
+		break;
+	case 2:
+		clksys = CLOCK_720M;
+		break;
+	default:
+		clksys = CLOCK_600M;
+		break;
+	}
+
+	switch (freq_div) {
+	case 1:
+		return clksys >> 1;
+	case 2:
+		return clksys >> 2;
+	default:
+		return clksys >> 1;
+	}
+}
+
+unsigned long ltq_grx390_pp32_hz(void)
+{
+	unsigned int clksys = (ltq_cgu_r32(CGU_SYS) >> 16) & 0x7;
+	unsigned long clk;
+
+	switch (clksys) {
+	case 1:
+		clk = CLOCK_250M;
+		break;
+	case 2:
+		clk = CLOCK_432M;
+		break;
+	case 4:
+		clk = CLOCK_400M;
+		break;
+	default:
+		clk = CLOCK_250M;
+		break;
+	}
+	return clk;
+}
diff --git a/arch/mips/lantiq/xway/prom.c b/arch/mips/lantiq/xway/prom.c
index 248429ab2622..8f6e02f1e965 100644
--- a/arch/mips/lantiq/xway/prom.c
+++ b/arch/mips/lantiq/xway/prom.c
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/export.h>
@@ -19,8 +20,11 @@
 #define SOC_TWINPASS	"Twinpass"
 #define SOC_AMAZON_SE	"Amazon_SE"
 #define SOC_AR9		"AR9"
-#define SOC_GR9		"GR9"
-#define SOC_VR9		"VR9"
+#define SOC_GR9		"GRX200"
+#define SOC_VR9		"xRX200"
+#define SOC_VRX220	"xRX220"
+#define SOC_AR10	"xRX300"
+#define SOC_GRX390	"xRX330"
 
 #define COMP_DANUBE	"lantiq,danube"
 #define COMP_TWINPASS	"lantiq,twinpass"
@@ -28,6 +32,8 @@
 #define COMP_AR9	"lantiq,ar9"
 #define COMP_GR9	"lantiq,gr9"
 #define COMP_VR9	"lantiq,vr9"
+#define COMP_AR10	"lantiq,ar10"
+#define COMP_GRX390	"lantiq,grx390"
 
 #define PART_SHIFT	12
 #define PART_MASK	0x0FFFFFFF
@@ -101,6 +107,12 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
 		i->compatible = COMP_VR9;
 		break;
 
+	case SOC_ID_VRX220:
+		i->name = SOC_VRX220;
+		i->type = SOC_TYPE_VRX220;
+		i->compatible = COMP_VR9;
+		break;
+
 	case SOC_ID_GRX282_2:
 	case SOC_ID_GRX288_2:
 		i->name = SOC_GR9;
@@ -108,6 +120,25 @@ void __init ltq_soc_detect(struct ltq_soc_info *i)
 		i->compatible = COMP_GR9;
 		break;
 
+	case SOC_ID_ARX362:
+	case SOC_ID_ARX368:
+	case SOC_ID_ARX382:
+	case SOC_ID_ARX388:
+	case SOC_ID_URX388:
+		i->name = SOC_AR10;
+		i->type = SOC_TYPE_AR10;
+		i->compatible = COMP_AR10;
+		break;
+
+	case SOC_ID_GRX383:
+	case SOC_ID_GRX369:
+	case SOC_ID_GRX387:
+	case SOC_ID_GRX389:
+		i->name = SOC_GRX390;
+		i->type = SOC_TYPE_GRX390;
+		i->compatible = COMP_GRX390;
+		break;
+
 	default:
 		unreachable();
 		break;
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index fe68f9ae47c1..bc29bb349e94 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/init.h>
@@ -22,9 +23,6 @@
 
 #include "../prom.h"
 
-#define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
-#define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
-
 /* reset request register */
 #define RCU_RST_REQ		0x0010
 /* reset status register */
@@ -32,11 +30,33 @@
 /* vr9 gphy registers */
 #define RCU_GFS_ADD0_XRX200	0x0020
 #define RCU_GFS_ADD1_XRX200	0x0068
+/* xRX300 gphy registers */
+#define RCU_GFS_ADD0_XRX300	0x0020
+#define RCU_GFS_ADD1_XRX300	0x0058
+#define RCU_GFS_ADD2_XRX300	0x00AC
+/* xRX330 gphy registers */
+#define RCU_GFS_ADD0_XRX330	0x0020
+#define RCU_GFS_ADD1_XRX330	0x0058
+#define RCU_GFS_ADD2_XRX330	0x00AC
+#define RCU_GFS_ADD3_XRX330	0x0264
+
+/* xbar BE flag */
+#define RCU_AHB_ENDIAN          0x004C
+#define RCU_VR9_BE_AHB1S        0x00000008
 
 /* reboot bit */
 #define RCU_RD_GPHY0_XRX200	BIT(31)
 #define RCU_RD_SRST		BIT(30)
 #define RCU_RD_GPHY1_XRX200	BIT(29)
+/* xRX300 bits */
+#define RCU_RD_GPHY0_XRX300	BIT(31)
+#define RCU_RD_GPHY1_XRX300	BIT(29)
+#define RCU_RD_GPHY2_XRX300	BIT(28)
+/* xRX330 bits */
+#define RCU_RD_GPHY0_XRX330	BIT(31)
+#define RCU_RD_GPHY1_XRX330	BIT(29)
+#define RCU_RD_GPHY2_XRX330	BIT(28)
+#define RCU_RD_GPHY3_XRX330	BIT(10)
 
 /* reset cause */
 #define RCU_STAT_SHIFT		26
@@ -44,9 +64,60 @@
 #define RCU_BOOT_SEL(x)		((x >> 18) & 0x7)
 #define RCU_BOOT_SEL_XRX200(x)	(((x >> 17) & 0xf) | ((x >> 8) & 0x10))
 
+/* dwc2 USB configuration registers */
+#define RCU_USB1CFG		0x0018
+#define RCU_USB2CFG		0x0034
+
+/* USB DMA endianness bits */
+#define RCU_USBCFG_HDSEL_BIT	BIT(11)
+#define RCU_USBCFG_HOST_END_BIT	BIT(10)
+#define RCU_USBCFG_SLV_END_BIT	BIT(9)
+
+/* USB reset bits */
+#define RCU_USBRESET		0x0010
+
+#define USBRESET_BIT		BIT(4)
+
+#define RCU_USBRESET2		0x0048
+
+#define USB1RESET_BIT		BIT(4)
+#define USB2RESET_BIT		BIT(5)
+
+#define RCU_CFG1A		0x0038
+#define RCU_CFG1B		0x003C
+
+/* USB PMU devices */
+#define PMU_AHBM		BIT(15)
+#define PMU_USB0		BIT(6)
+#define PMU_USB1		BIT(27)
+
+/* USB PHY PMU devices */
+#define PMU_USB0_P		BIT(0)
+#define PMU_USB1_P		BIT(26)
+
 /* remapped base addr of the reset control unit */
 static void __iomem *ltq_rcu_membase;
 static struct device_node *ltq_rcu_np;
+static DEFINE_SPINLOCK(ltq_rcu_lock);
+
+static void ltq_rcu_w32(uint32_t val, uint32_t reg_off)
+{
+	ltq_w32(val, ltq_rcu_membase + reg_off);
+}
+
+static uint32_t ltq_rcu_r32(uint32_t reg_off)
+{
+	return ltq_r32(ltq_rcu_membase + reg_off);
+}
+
+static void ltq_rcu_w32_mask(uint32_t clr, uint32_t set, uint32_t reg_off)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ltq_rcu_lock, flags);
+	ltq_rcu_w32((ltq_rcu_r32(reg_off) & ~(clr)) | (set), reg_off);
+	spin_unlock_irqrestore(&ltq_rcu_lock, flags);
+}
 
 /* This function is used by the watchdog driver */
 int ltq_reset_cause(void)
@@ -67,15 +138,40 @@ unsigned char ltq_boot_select(void)
 	return RCU_BOOT_SEL(val);
 }
 
-/* reset / boot a gphy */
-static struct ltq_xrx200_gphy_reset {
+struct ltq_gphy_reset {
 	u32 rd;
 	u32 addr;
-} xrx200_gphy[] = {
+};
+
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx200_gphy[] = {
 	{RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
 	{RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
 };
 
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx300_gphy[] = {
+	{RCU_RD_GPHY0_XRX300, RCU_GFS_ADD0_XRX300},
+	{RCU_RD_GPHY1_XRX300, RCU_GFS_ADD1_XRX300},
+	{RCU_RD_GPHY2_XRX300, RCU_GFS_ADD2_XRX300},
+};
+
+/* reset / boot a gphy */
+static struct ltq_gphy_reset xrx330_gphy[] = {
+	{RCU_RD_GPHY0_XRX330, RCU_GFS_ADD0_XRX330},
+	{RCU_RD_GPHY1_XRX330, RCU_GFS_ADD1_XRX330},
+	{RCU_RD_GPHY2_XRX330, RCU_GFS_ADD2_XRX330},
+	{RCU_RD_GPHY3_XRX330, RCU_GFS_ADD3_XRX330},
+};
+
+static void xrx200_gphy_boot_addr(struct ltq_gphy_reset *phy_regs,
+				  dma_addr_t dev_addr)
+{
+	ltq_rcu_w32_mask(0, phy_regs->rd, RCU_RST_REQ);
+	ltq_rcu_w32(dev_addr, phy_regs->addr);
+	ltq_rcu_w32_mask(phy_regs->rd, 0,  RCU_RST_REQ);
+}
+
 /* reset and boot a gphy. these phys only exist on xrx200 SoC */
 int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
 {
@@ -86,23 +182,34 @@ int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
 		return -EINVAL;
 	}
 
-	clk = clk_get_sys("1f203000.rcu", "gphy");
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	clk_enable(clk);
-
-	if (id > 1) {
-		dev_err(dev, "%u is an invalid gphy id\n", id);
-		return -EINVAL;
+	if (of_machine_is_compatible("lantiq,vr9")) {
+		clk = clk_get_sys("1f203000.rcu", "gphy");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+		clk_enable(clk);
 	}
+
 	dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
 
-	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd,
-			RCU_RST_REQ);
-	ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr);
-	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd,
-			RCU_RST_REQ);
+	if (of_machine_is_compatible("lantiq,vr9")) {
+		if (id >= ARRAY_SIZE(xrx200_gphy)) {
+			dev_err(dev, "%u is an invalid gphy id\n", id);
+			return -EINVAL;
+		}
+		xrx200_gphy_boot_addr(&xrx200_gphy[id], dev_addr);
+	} else if (of_machine_is_compatible("lantiq,ar10")) {
+		if (id >= ARRAY_SIZE(xrx300_gphy)) {
+			dev_err(dev, "%u is an invalid gphy id\n", id);
+			return -EINVAL;
+		}
+		xrx200_gphy_boot_addr(&xrx300_gphy[id], dev_addr);
+	} else if (of_machine_is_compatible("lantiq,grx390")) {
+		if (id >= ARRAY_SIZE(xrx330_gphy)) {
+			dev_err(dev, "%u is an invalid gphy id\n", id);
+			return -EINVAL;
+		}
+		xrx200_gphy_boot_addr(&xrx330_gphy[id], dev_addr);
+	}
 	return 0;
 }
 
@@ -200,6 +307,45 @@ static void ltq_machine_power_off(void)
 	unreachable();
 }
 
+static void ltq_usb_init(void)
+{
+	/* Power for USB cores 1 & 2 */
+	ltq_pmu_enable(PMU_AHBM);
+	ltq_pmu_enable(PMU_USB0);
+	ltq_pmu_enable(PMU_USB1);
+
+	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B);
+
+	/* Enable USB PHY power for cores 1 & 2 */
+	ltq_pmu_enable(PMU_USB0_P);
+	ltq_pmu_enable(PMU_USB1_P);
+
+	/* Configure cores to host mode */
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT,
+		RCU_USB1CFG);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT,
+		RCU_USB2CFG);
+
+	/* Select DMA endianness (Host-endian: big-endian) */
+	ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT)
+		| RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG);
+	ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT)
+		| RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG);
+
+	/* Hard reset USB state machines */
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET);
+	udelay(50 * 1000);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET);
+
+	/* Soft reset USB state machines */
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+		| USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2);
+	udelay(50 * 1000);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2)
+		& ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2);
+}
+
 static int __init mips_reboot_setup(void)
 {
 	struct resource res;
@@ -216,13 +362,21 @@ static int __init mips_reboot_setup(void)
 	if (of_address_to_resource(ltq_rcu_np, 0, &res))
 		panic("Failed to get rcu memory range");
 
-	if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
+	if (!request_mem_region(res.start, resource_size(&res), res.name))
 		pr_err("Failed to request rcu memory");
 
 	ltq_rcu_membase = ioremap_nocache(res.start, resource_size(&res));
 	if (!ltq_rcu_membase)
 		panic("Failed to remap core memory");
 
+	if (of_machine_is_compatible("lantiq,ar9") ||
+	    of_machine_is_compatible("lantiq,vr9"))
+		ltq_usb_init();
+
+	if (of_machine_is_compatible("lantiq,vr9"))
+		ltq_rcu_w32(ltq_rcu_r32(RCU_AHB_ENDIAN) | RCU_VR9_BE_AHB1S,
+			    RCU_AHB_ENDIAN);
+
 	_machine_restart = ltq_machine_restart;
 	_machine_halt = ltq_machine_halt;
 	pm_power_off = ltq_machine_power_off;
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 2b15491de494..80554e8f6037 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -4,11 +4,13 @@
  *  by the Free Software Foundation.
  *
  *  Copyright (C) 2011-2012 John Crispin <blogic@openwrt.org>
+ *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
  */
 
 #include <linux/ioport.h>
 #include <linux/export.h>
 #include <linux/clkdev.h>
+#include <linux/spinlock.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
@@ -18,16 +20,18 @@
 #include "../clk.h"
 #include "../prom.h"
 
-/* clock control register */
+/* clock control register for legacy */
 #define CGU_IFCCR	0x0018
 #define CGU_IFCCR_VR9	0x0024
-/* system clock register */
+/* system clock register for legacy */
 #define CGU_SYS		0x0010
 /* pci control register */
 #define CGU_PCICR	0x0034
 #define CGU_PCICR_VR9	0x0038
 /* ephy configuration register */
 #define CGU_EPHY	0x10
+
+/* Legacy PMU register for ar9, ase, danube */
 /* power control register */
 #define PMU_PWDCR	0x1C
 /* power status register */
@@ -41,13 +45,56 @@
 /* power status register */
 #define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))
 
+
+/* PMU register for ar10 and grx390 */
+
+/* First register set */
+#define PMU_CLK_SR	0x20 /* status */
+#define PMU_CLK_CR_A	0x24 /* Enable */
+#define PMU_CLK_CR_B	0x28 /* Disable */
+/* Second register set */
+#define PMU_CLK_SR1	0x30 /* status */
+#define PMU_CLK_CR1_A	0x34 /* Enable */
+#define PMU_CLK_CR1_B	0x38 /* Disable */
+/* Third register set */
+#define PMU_ANA_SR	0x40 /* status */
+#define PMU_ANA_CR_A	0x44 /* Enable */
+#define PMU_ANA_CR_B	0x48 /* Disable */
+
+/* Status */
+static u32 pmu_clk_sr[] = {
+	PMU_CLK_SR,
+	PMU_CLK_SR1,
+	PMU_ANA_SR,
+};
+
+/* Enable */
+static u32 pmu_clk_cr_a[] = {
+	PMU_CLK_CR_A,
+	PMU_CLK_CR1_A,
+	PMU_ANA_CR_A,
+};
+
+/* Disable */
+static u32 pmu_clk_cr_b[] = {
+	PMU_CLK_CR_B,
+	PMU_CLK_CR1_B,
+	PMU_ANA_CR_B,
+};
+
+#define PWDCR_EN_XRX(x)		(pmu_clk_cr_a[(x)])
+#define PWDCR_DIS_XRX(x)	(pmu_clk_cr_b[(x)])
+#define PWDSR_XRX(x)		(pmu_clk_sr[(x)])
+
 /* clock gates that we can en/disable */
 #define PMU_USB0_P	BIT(0)
+#define PMU_ASE_SDIO	BIT(2) /* ASE special */
 #define PMU_PCI		BIT(4)
 #define PMU_DMA		BIT(5)
 #define PMU_USB0	BIT(6)
 #define PMU_ASC0	BIT(7)
 #define PMU_EPHY	BIT(7)	/* ase */
+#define PMU_USIF	BIT(7) /* from vr9 until grx390 */
 #define PMU_SPI		BIT(8)
 #define PMU_DFE		BIT(9)
 #define PMU_EBU		BIT(10)
@@ -56,12 +103,15 @@
 #define PMU_AHBS	BIT(13) /* vr9 */
 #define PMU_FPI		BIT(14)
 #define PMU_AHBM	BIT(15)
+#define PMU_SDIO	BIT(16) /* danube, ar9, vr9 */
 #define PMU_ASC1	BIT(17)
 #define PMU_PPE_QSB	BIT(18)
 #define PMU_PPE_SLL01	BIT(19)
+#define PMU_DEU		BIT(20)
 #define PMU_PPE_TC	BIT(21)
 #define PMU_PPE_EMA	BIT(22)
 #define PMU_PPE_DPLUM	BIT(23)
+#define PMU_PPE_DP	BIT(23)
 #define PMU_PPE_DPLUS	BIT(24)
 #define PMU_USB1_P	BIT(26)
 #define PMU_USB1	BIT(27)
@@ -70,30 +120,59 @@
 #define PMU_GPHY	BIT(30)
 #define PMU_PCIE_CLK	BIT(31)
 
-#define PMU1_PCIE_PHY	BIT(0)
+#define PMU1_PCIE_PHY	BIT(0)	/* vr9-specific,moved in ar10/grx390 */
 #define PMU1_PCIE_CTL	BIT(1)
 #define PMU1_PCIE_PDI	BIT(4)
 #define PMU1_PCIE_MSI	BIT(5)
+#define PMU1_CKE	BIT(6)
+#define PMU1_PCIE1_CTL	BIT(17)
+#define PMU1_PCIE1_PDI	BIT(20)
+#define PMU1_PCIE1_MSI	BIT(21)
+#define PMU1_PCIE2_CTL	BIT(25)
+#define PMU1_PCIE2_PDI	BIT(26)
+#define PMU1_PCIE2_MSI	BIT(27)
+
+#define PMU_ANALOG_USB0_P	BIT(0)
+#define PMU_ANALOG_USB1_P	BIT(1)
+#define PMU_ANALOG_PCIE0_P	BIT(8)
+#define PMU_ANALOG_PCIE1_P	BIT(9)
+#define PMU_ANALOG_PCIE2_P	BIT(10)
+#define PMU_ANALOG_DSL_AFE	BIT(16)
+#define PMU_ANALOG_DCDC_2V5	BIT(17)
+#define PMU_ANALOG_DCDC_1VX	BIT(18)
+#define PMU_ANALOG_DCDC_1V0	BIT(19)
 
 #define pmu_w32(x, y)	ltq_w32((x), pmu_membase + (y))
 #define pmu_r32(x)	ltq_r32(pmu_membase + (x))
 
+#define XBAR_ALWAYS_LAST	0x430
+#define XBAR_FPI_BURST_EN	BIT(1)
+#define XBAR_AHB_BURST_EN	BIT(2)
+
+#define xbar_w32(x, y)	ltq_w32((x), ltq_xbar_membase + (y))
+#define xbar_r32(x)	ltq_r32(ltq_xbar_membase + (x))
+
 static void __iomem *pmu_membase;
+static void __iomem *ltq_xbar_membase;
 void __iomem *ltq_cgu_membase;
 void __iomem *ltq_ebu_membase;
 
 static u32 ifccr = CGU_IFCCR;
 static u32 pcicr = CGU_PCICR;
 
+static DEFINE_SPINLOCK(g_pmu_lock);
+
 /* legacy function kept alive to ease clkdev transition */
 void ltq_pmu_enable(unsigned int module)
 {
-	int err = 1000000;
+	int retry = 1000000;
 
+	spin_lock(&g_pmu_lock);
 	pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR);
-	do {} while (--err && (pmu_r32(PMU_PWDSR) & module));
+	do {} while (--retry && (pmu_r32(PMU_PWDSR) & module));
+	spin_unlock(&g_pmu_lock);
 
-	if (!err)
+	if (!retry)
 		panic("activating PMU module failed!");
 }
 EXPORT_SYMBOL(ltq_pmu_enable);
@@ -101,7 +180,15 @@ EXPORT_SYMBOL(ltq_pmu_enable);
 /* legacy function kept alive to ease clkdev transition */
 void ltq_pmu_disable(unsigned int module)
 {
+	int retry = 1000000;
+
+	spin_lock(&g_pmu_lock);
 	pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR);
+	do {} while (--retry && (!(pmu_r32(PMU_PWDSR) & module)));
+	spin_unlock(&g_pmu_lock);
+
+	if (!retry)
+		pr_warn("deactivating PMU module failed!");
 }
 EXPORT_SYMBOL(ltq_pmu_disable);
 
@@ -123,9 +210,20 @@ static int pmu_enable(struct clk *clk)
 {
 	int retry = 1000000;
 
-	pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
-		PWDCR(clk->module));
-	do {} while (--retry && (pmu_r32(PWDSR(clk->module)) & clk->bits));
+	if (of_machine_is_compatible("lantiq,ar10")
+	    || of_machine_is_compatible("lantiq,grx390")) {
+		pmu_w32(clk->bits, PWDCR_EN_XRX(clk->module));
+		do {} while (--retry &&
+			     (!(pmu_r32(PWDSR_XRX(clk->module)) & clk->bits)));
+
+	} else {
+		spin_lock(&g_pmu_lock);
+		pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
+				PWDCR(clk->module));
+		do {} while (--retry &&
+			     (pmu_r32(PWDSR(clk->module)) & clk->bits));
+		spin_unlock(&g_pmu_lock);
+	}
 
 	if (!retry)
 		panic("activating PMU module failed!");
@@ -136,8 +234,24 @@ static int pmu_enable(struct clk *clk)
 /* disable a clock gate */
 static void pmu_disable(struct clk *clk)
 {
-	pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
-		PWDCR(clk->module));
+	int retry = 1000000;
+
+	if (of_machine_is_compatible("lantiq,ar10")
+	    || of_machine_is_compatible("lantiq,grx390")) {
+		pmu_w32(clk->bits, PWDCR_DIS_XRX(clk->module));
+		do {} while (--retry &&
+			     (pmu_r32(PWDSR_XRX(clk->module)) & clk->bits));
+	} else {
+		spin_lock(&g_pmu_lock);
+		pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
+				PWDCR(clk->module));
+		do {} while (--retry &&
+			     (!(pmu_r32(PWDSR(clk->module)) & clk->bits)));
+		spin_unlock(&g_pmu_lock);
+	}
+
+	if (!retry)
+		pr_warn("deactivating PMU module failed!");
 }
 
 /* the pci enable helper */
@@ -179,6 +293,16 @@ static void pci_ext_disable(struct clk *clk)
 	ltq_cgu_w32((1 << 31) | (1 << 30), pcicr);
 }
 
+static void xbar_fpi_burst_disable(void)
+{
+	u32 reg;
+
+	/* bit 1 as 1 --burst; bit 1 as 0 -- single */
+	reg = xbar_r32(XBAR_ALWAYS_LAST);
+	reg &= ~XBAR_FPI_BURST_EN;
+	xbar_w32(reg, XBAR_ALWAYS_LAST);
+}
+
 /* enable a clockout source */
 static int clkout_enable(struct clk *clk)
 {
@@ -202,8 +326,8 @@ static int clkout_enable(struct clk *clk)
 }
 
 /* manage the clock gates via PMU */
-static void clkdev_add_pmu(const char *dev, const char *con,
-					unsigned int module, unsigned int bits)
+static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate,
+			   unsigned int module, unsigned int bits)
 {
 	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
 
@@ -214,6 +338,13 @@ static void clkdev_add_pmu(const char *dev, const char *con,
 	clk->disable = pmu_disable;
 	clk->module = module;
 	clk->bits = bits;
+	if (deactivate) {
+		/*
+		 * Disable it during the initialization. Module should enable
+		 * when used
+		 */
+		pmu_disable(clk);
+	}
 	clkdev_add(&clk->cl);
 }
 
@@ -312,12 +443,12 @@ void __init ltq_soc_init(void)
 			of_address_to_resource(np_ebu, 0, &res_ebu))
 		panic("Failed to get core resources");
 
-	if ((request_mem_region(res_pmu.start, resource_size(&res_pmu),
-				res_pmu.name) < 0) ||
-		(request_mem_region(res_cgu.start, resource_size(&res_cgu),
-				res_cgu.name) < 0) ||
-		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
-				res_ebu.name) < 0))
+	if (!request_mem_region(res_pmu.start, resource_size(&res_pmu),
+				res_pmu.name) ||
+		!request_mem_region(res_cgu.start, resource_size(&res_cgu),
+				res_cgu.name) ||
+		!request_mem_region(res_ebu.start, resource_size(&res_ebu),
+				res_ebu.name))
 		pr_err("Failed to request core resources");
 
 	pmu_membase = ioremap_nocache(res_pmu.start, resource_size(&res_pmu));
@@ -328,17 +459,37 @@ void __init ltq_soc_init(void)
 	if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase)
 		panic("Failed to remap core resources");
 
+	if (of_machine_is_compatible("lantiq,vr9")) {
+		struct resource res_xbar;
+		struct device_node *np_xbar =
+				of_find_compatible_node(NULL, NULL,
+							"lantiq,xbar-xway");
+
+		if (!np_xbar)
+			panic("Failed to load xbar nodes from devicetree");
+		if (of_address_to_resource(np_pmu, 0, &res_xbar))
+			panic("Failed to get xbar resources");
+		if (request_mem_region(res_xbar.start, resource_size(&res_xbar),
+			res_xbar.name) < 0)
+			panic("Failed to get xbar resources");
+
+		ltq_xbar_membase = ioremap_nocache(res_xbar.start,
+						   resource_size(&res_xbar));
+		if (!ltq_xbar_membase)
+			panic("Failed to remap xbar resources");
+	}
+
 	/* make sure to unprotect the memory region where flash is located */
 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
 
 	/* add our generic xway clocks */
-	clkdev_add_pmu("10000000.fpi", NULL, 0, PMU_FPI);
-	clkdev_add_pmu("1e100400.serial", NULL, 0, PMU_ASC0);
-	clkdev_add_pmu("1e100a00.gptu", NULL, 0, PMU_GPT);
-	clkdev_add_pmu("1e100bb0.stp", NULL, 0, PMU_STP);
-	clkdev_add_pmu("1e104100.dma", NULL, 0, PMU_DMA);
-	clkdev_add_pmu("1e100800.spi", NULL, 0, PMU_SPI);
-	clkdev_add_pmu("1e105300.ebu", NULL, 0, PMU_EBU);
+	clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI);
+	clkdev_add_pmu("1e100400.serial", NULL, 0, 0, PMU_ASC0);
+	clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT);
+	clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP);
+	clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA);
+	clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI);
+	clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU);
 	clkdev_add_clkout();
 
 	/* add the soc dependent clocks */
@@ -346,14 +497,30 @@ void __init ltq_soc_init(void)
 		ifccr = CGU_IFCCR_VR9;
 		pcicr = CGU_PCICR_VR9;
 	} else {
-		clkdev_add_pmu("1e180000.etop", NULL, 0, PMU_PPE);
+		clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE);
 	}
 
 	if (!of_machine_is_compatible("lantiq,ase")) {
-		clkdev_add_pmu("1e100c00.serial", NULL, 0, PMU_ASC1);
+		clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1);
 		clkdev_add_pci();
 	}
 
+	if (of_machine_is_compatible("lantiq,grx390") ||
+	    of_machine_is_compatible("lantiq,ar10")) {
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 2, PMU_ANALOG_USB0_P);
+		clkdev_add_pmu("1e106000.usb", "phy", 1, 2, PMU_ANALOG_USB1_P);
+		/* rc 0 */
+		clkdev_add_pmu("1d900000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
+		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
+		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
+		/* rc 1 */
+		clkdev_add_pmu("19000000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
+		clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI);
+		clkdev_add_pmu("19000000.pcie", "pdi", 1, 1, PMU1_PCIE1_PDI);
+		clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL);
+	}
+
 	if (of_machine_is_compatible("lantiq,ase")) {
 		if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
 			clkdev_add_static(CLOCK_266M, CLOCK_133M,
@@ -361,28 +528,84 @@ void __init ltq_soc_init(void)
 		else
 			clkdev_add_static(CLOCK_133M, CLOCK_133M,
 						CLOCK_133M, CLOCK_133M);
-		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY),
-		clkdev_add_pmu("1e180000.etop", "ephy", 0, PMU_EPHY);
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE);
+		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY);
+		clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+	} else if (of_machine_is_compatible("lantiq,grx390")) {
+		clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(),
+				  ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz());
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+		/* rc 2 */
+		clkdev_add_pmu("1a800000.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
+		clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
+		clkdev_add_pmu("1a800000.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
+		clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
+		clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH | PMU_PPE_DP);
+		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+	} else if (of_machine_is_compatible("lantiq,ar10")) {
+		clkdev_add_static(ltq_ar10_cpu_hz(), ltq_ar10_fpi_hz(),
+				  ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+		clkdev_add_pmu("1e108000.eth", NULL, 1, 0, PMU_SWITCH |
+			       PMU_PPE_DP | PMU_PPE_TC);
+		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+		clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
 	} else if (of_machine_is_compatible("lantiq,vr9")) {
 		clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
 				ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz());
-		clkdev_add_pmu("1d900000.pcie", "phy", 1, PMU1_PCIE_PHY);
-		clkdev_add_pmu("1d900000.pcie", "bus", 0, PMU_PCIE_CLK);
-		clkdev_add_pmu("1d900000.pcie", "msi", 1, PMU1_PCIE_MSI);
-		clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI);
-		clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL);
-		clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
-		clkdev_add_pmu("1e108000.eth", NULL, 0,
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0 | PMU_AHBM);
+		clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1 | PMU_AHBM);
+		clkdev_add_pmu("1d900000.pcie", "phy", 1, 1, PMU1_PCIE_PHY);
+		clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK);
+		clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
+		clkdev_add_pmu("1d900000.pcie", "pdi", 1, 1, PMU1_PCIE_PDI);
+		clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
+		clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
+
+		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+		clkdev_add_pmu("1e108000.eth", NULL, 1, 0,
 				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
 				PMU_PPE_QSB | PMU_PPE_TOP);
-		clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY);
+		clkdev_add_pmu("1f203000.rcu", "gphy", 1, 0, PMU_GPHY);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
 	} else if (of_machine_is_compatible("lantiq,ar9")) {
 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
 				ltq_ar9_fpi_hz(), CLOCK_250M);
-		clkdev_add_pmu("1e180000.etop", "switch", 0, PMU_SWITCH);
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e106000.usb", "ctl", 1, 0, PMU_USB1);
+		clkdev_add_pmu("1e106000.usb", "phy", 1, 0, PMU_USB1_P);
+		clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
 	} else {
 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
 				ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
+		clkdev_add_pmu("1e101000.usb", "ctl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "phy", 1, 0, PMU_USB0_P);
+		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+		clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
 	}
+
+	if (of_machine_is_compatible("lantiq,vr9"))
+		xbar_fpi_burst_disable();
 }
diff --git a/arch/mips/lasat/picvue_proc.c b/arch/mips/lasat/picvue_proc.c
index 2bcd8391bc93..b42095880667 100644
--- a/arch/mips/lasat/picvue_proc.c
+++ b/arch/mips/lasat/picvue_proc.c
@@ -22,7 +22,6 @@
 static DEFINE_MUTEX(pvc_mutex);
 static char pvc_lines[PVC_NLINES][PVC_LINELEN+1];
 static int pvc_linedata[PVC_NLINES];
-static struct proc_dir_entry *pvc_display_dir;
 static char *pvc_linename[PVC_NLINES] = {"line1", "line2"};
 #define DISPLAY_DIR_NAME "display"
 static int scroll_dir, scroll_interval;
@@ -169,22 +168,17 @@ void pvc_proc_timerfunc(unsigned long data)
 
 static void pvc_proc_cleanup(void)
 {
-	int i;
-	for (i = 0; i < PVC_NLINES; i++)
-		remove_proc_entry(pvc_linename[i], pvc_display_dir);
-	remove_proc_entry("scroll", pvc_display_dir);
-	remove_proc_entry(DISPLAY_DIR_NAME, NULL);
-
+	remove_proc_subtree(DISPLAY_DIR_NAME, NULL);
 	del_timer_sync(&timer);
 }
 
 static int __init pvc_proc_init(void)
 {
-	struct proc_dir_entry *proc_entry;
+	struct proc_dir_entry *dir, *proc_entry;
 	int i;
 
-	pvc_display_dir = proc_mkdir(DISPLAY_DIR_NAME, NULL);
-	if (pvc_display_dir == NULL)
+	dir = proc_mkdir(DISPLAY_DIR_NAME, NULL);
+	if (dir == NULL)
 		goto error;
 
 	for (i = 0; i < PVC_NLINES; i++) {
@@ -192,12 +186,12 @@ static int __init pvc_proc_init(void)
 		pvc_linedata[i] = i;
 	}
 	for (i = 0; i < PVC_NLINES; i++) {
-		proc_entry = proc_create_data(pvc_linename[i], 0644, pvc_display_dir,
+		proc_entry = proc_create_data(pvc_linename[i], 0644, dir,
 					&pvc_line_proc_fops, &pvc_linedata[i]);
 		if (proc_entry == NULL)
 			goto error;
 	}
-	proc_entry = proc_create("scroll", 0644, pvc_display_dir,
+	proc_entry = proc_create("scroll", 0644, dir,
 				 &pvc_scroll_proc_fops);
 	if (proc_entry == NULL)
 		goto error;
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index 1e9e900cd3c3..0344e575f522 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -15,4 +15,4 @@ obj-$(CONFIG_CPU_R3000)		+= r3k_dump_tlb.o
 obj-$(CONFIG_CPU_TX39XX)	+= r3k_dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
-obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
+obj-y += ashldi3.o ashrdi3.o bswapsi.o bswapdi.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/lib/bswapdi.c b/arch/mips/lib/bswapdi.c
new file mode 100644
index 000000000000..77e5f9c1f005
--- /dev/null
+++ b/arch/mips/lib/bswapdi.c
@@ -0,0 +1,15 @@
+#include <linux/module.h>
+
+unsigned long long __bswapdi2(unsigned long long u)
+{
+	return (((u) & 0xff00000000000000ull) >> 56) |
+	       (((u) & 0x00ff000000000000ull) >> 40) |
+	       (((u) & 0x0000ff0000000000ull) >> 24) |
+	       (((u) & 0x000000ff00000000ull) >>  8) |
+	       (((u) & 0x00000000ff000000ull) <<  8) |
+	       (((u) & 0x0000000000ff0000ull) << 24) |
+	       (((u) & 0x000000000000ff00ull) << 40) |
+	       (((u) & 0x00000000000000ffull) << 56);
+}
+
+EXPORT_SYMBOL(__bswapdi2);
diff --git a/arch/mips/lib/bswapsi.c b/arch/mips/lib/bswapsi.c
new file mode 100644
index 000000000000..2b302ff121d2
--- /dev/null
+++ b/arch/mips/lib/bswapsi.c
@@ -0,0 +1,11 @@
+#include <linux/module.h>
+
+unsigned int __bswapsi2(unsigned int u)
+{
+	return (((u) & 0xff000000) >> 24) |
+	       (((u) & 0x00ff0000) >>  8) |
+	       (((u) & 0x0000ff00) <<  8) |
+	       (((u) & 0x000000ff) << 24);
+}
+
+EXPORT_SYMBOL(__bswapsi2);
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index b8e63fd00375..8f0019a2e5c8 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -283,6 +283,8 @@ LEAF(memset)
 1:
 #ifndef CONFIG_EVA
 FEXPORT(__bzero)
+#else
+FEXPORT(__bzero_kernel)
 #endif
 	__BUILD_BZERO LEGACY_MODE
 
diff --git a/arch/mips/lib/mips-atomic.c b/arch/mips/lib/mips-atomic.c
index 272af8ac2425..5530070e0d05 100644
--- a/arch/mips/lib/mips-atomic.c
+++ b/arch/mips/lib/mips-atomic.c
@@ -57,7 +57,6 @@ notrace void arch_local_irq_disable(void)
 }
 EXPORT_SYMBOL(arch_local_irq_disable);
 
-
 notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long flags;
@@ -111,31 +110,4 @@ notrace void arch_local_irq_restore(unsigned long flags)
 }
 EXPORT_SYMBOL(arch_local_irq_restore);
 
-
-notrace void __arch_local_irq_restore(unsigned long flags)
-{
-	unsigned long __tmp1;
-
-	preempt_disable();
-
-	__asm__ __volatile__(
-	"	.set	push						\n"
-	"	.set	noreorder					\n"
-	"	.set	noat						\n"
-	"	mfc0	$1, $12						\n"
-	"	andi	%[flags], 1					\n"
-	"	ori	$1, 0x1f					\n"
-	"	xori	$1, 0x1f					\n"
-	"	or	%[flags], $1					\n"
-	"	mtc0	%[flags], $12					\n"
-	"	" __stringify(__irq_disable_hazard) "			\n"
-	"	.set	pop						\n"
-	: [flags] "=r" (__tmp1)
-	: "0" (flags)
-	: "memory");
-
-	preempt_enable();
-}
-EXPORT_SYMBOL(__arch_local_irq_restore);
-
-#endif /* !CONFIG_CPU_MIPSR2 */
+#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR6 */
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index 497912b38d8e..8e6e292675b2 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -120,11 +120,6 @@ config RS780_HPET
 
 	  If unsure, say Yes.
 
-config LOONGSON_SUSPEND
-	bool
-	default y
-	depends on CPU_SUPPORTS_CPUFREQ && SUSPEND
-
 config LOONGSON_UART_BASE
 	bool
 	default y
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 2e48e83d5524..85d808924c94 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -22,6 +22,27 @@ ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
   endif
 endif
 
+cflags-$(CONFIG_CPU_LOONGSON3)	+= -Wa,--trap
+#
+# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
+# as MIPS64 R2; older versions as just R1.  This leaves the possibility open
+# that GCC might generate R2 code for -march=loongson3a which then is rejected
+# by GAS.  The cc-option can't probe for this behaviour so -march=loongson3a
+# can't easily be used safely within the kbuild framework.
+#
+ifeq ($(call cc-ifversion, -ge, 0409, y), y)
+  ifeq ($(call ld-ifversion, -ge, 22500000, y), y)
+    cflags-$(CONFIG_CPU_LOONGSON3)  += \
+      $(call cc-option,-march=loongson3a -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
+  else
+    cflags-$(CONFIG_CPU_LOONGSON3)  += \
+      $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
+  endif
+else
+    cflags-$(CONFIG_CPU_LOONGSON3)  += \
+      $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
+endif
+
 #
 # Loongson Machines' Support
 #
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index f2e8153e44f5..074d9cb15cd2 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_CS5536) += cs5536/
 # Suspend Support
 #
 
-obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
+obj-$(CONFIG_SUSPEND) += pm.o
 
 #
 # Big Memory (SWIOTLB) Support
diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson64/lemote-2f/Makefile
index 4f9eaa328a16..08b8abcbfef5 100644
--- a/arch/mips/loongson64/lemote-2f/Makefile
+++ b/arch/mips/loongson64/lemote-2f/Makefile
@@ -8,4 +8,4 @@ obj-y += clock.o machtype.o irq.o reset.o ec_kb3310b.o
 # Suspend Support
 #
 
-obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
+obj-$(CONFIG_SUSPEND) += pm.o
diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/loongson-3/hpet.c
index bf9f1a77f0e5..a2631a52ca99 100644
--- a/arch/mips/loongson64/loongson-3/hpet.c
+++ b/arch/mips/loongson64/loongson-3/hpet.c
@@ -13,6 +13,9 @@
 #define SMBUS_PCI_REG64		0x64
 #define SMBUS_PCI_REGB4		0xb4
 
+#define HPET_MIN_CYCLES		64
+#define HPET_MIN_PROG_DELTA	(HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
 static DEFINE_SPINLOCK(hpet_lock);
 DEFINE_PER_CPU(struct clock_event_device, hpet_clockevent_device);
 
@@ -161,8 +164,9 @@ static int hpet_next_event(unsigned long delta,
 	cnt += delta;
 	hpet_write(HPET_T0_CMP, cnt);
 
-	res = ((int)(hpet_read(HPET_COUNTER) - cnt) > 0) ? -ETIME : 0;
-	return res;
+	res = (int)(cnt - hpet_read(HPET_COUNTER));
+
+	return res < HPET_MIN_CYCLES ? -ETIME : 0;
 }
 
 static irqreturn_t hpet_irq_handler(int irq, void *data)
@@ -237,7 +241,7 @@ void __init setup_hpet_timer(void)
 	cd->cpumask = cpumask_of(cpu);
 	clockevent_set_clock(cd, HPET_FREQ);
 	cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns = 5000;
+	cd->min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, cd);
 
 	clockevents_register_device(cd);
 	setup_irq(HPET_T0_IRQ, &hpet_irq);
diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/loongson-3/smp.c
index 1a4738a8f2d3..509832a9836c 100644
--- a/arch/mips/loongson64/loongson-3/smp.c
+++ b/arch/mips/loongson64/loongson-3/smp.c
@@ -30,13 +30,13 @@
 #include "smp.h"
 
 DEFINE_PER_CPU(int, cpu_state);
-DEFINE_PER_CPU(uint32_t, core0_c0count);
 
 static void *ipi_set0_regs[16];
 static void *ipi_clear0_regs[16];
 static void *ipi_status0_regs[16];
 static void *ipi_en0_regs[16];
 static void *ipi_mailbox_buf[16];
+static uint32_t core0_c0count[NR_CPUS];
 
 /* read a 32bit value from ipi register */
 #define loongson3_ipi_read32(addr) readl(addr)
@@ -275,12 +275,14 @@ void loongson3_ipi_interrupt(struct pt_regs *regs)
 	if (action & SMP_ASK_C0COUNT) {
 		BUG_ON(cpu != 0);
 		c0count = read_c0_count();
-		for (i = 1; i < num_possible_cpus(); i++)
-			per_cpu(core0_c0count, i) = c0count;
+		c0count = c0count ? c0count : 1;
+		for (i = 1; i < nr_cpu_ids; i++)
+			core0_c0count[i] = c0count;
+		__wbflush(); /* Let others see the result ASAP */
 	}
 }
 
-#define MAX_LOOPS 1111
+#define MAX_LOOPS 800
 /*
  * SMP init and finish on secondary CPUs
  */
@@ -305,16 +307,20 @@ static void loongson3_init_secondary(void)
 		cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
 
 	i = 0;
-	__this_cpu_write(core0_c0count, 0);
+	core0_c0count[cpu] = 0;
 	loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
-	while (!__this_cpu_read(core0_c0count)) {
+	while (!core0_c0count[cpu]) {
 		i++;
 		cpu_relax();
 	}
 
 	if (i > MAX_LOOPS)
 		i = MAX_LOOPS;
-	initcount = __this_cpu_read(core0_c0count) + i;
+	if (cpu_data[cpu].package)
+		initcount = core0_c0count[cpu] + i;
+	else /* Local access is faster for loops */
+		initcount = core0_c0count[cpu] + i/2;
+
 	write_c0_count(initcount);
 }
 
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 32f0e19a0d7f..cdfd44ffa51c 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -1266,6 +1266,8 @@ branch_common:
 						 */
 						sig = mips_dsemul(xcp, ir,
 								  contpc);
+						if (sig < 0)
+							break;
 						if (sig)
 							xcp->cp0_epc = bcpc;
 						/*
@@ -1319,6 +1321,8 @@ branch_common:
 				 * instruction in the dslot
 				 */
 				sig = mips_dsemul(xcp, ir, contpc);
+				if (sig < 0)
+					break;
 				if (sig)
 					xcp->cp0_epc = bcpc;
 				/* SIGILL forces out of the emulation loop.  */
diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c
index 926d56bf37f2..eb96485ed939 100644
--- a/arch/mips/math-emu/dp_simple.c
+++ b/arch/mips/math-emu/dp_simple.c
@@ -23,27 +23,39 @@
 
 union ieee754dp ieee754dp_neg(union ieee754dp x)
 {
-	unsigned int oldrm;
 	union ieee754dp y;
 
-	oldrm = ieee754_csr.rm;
-	ieee754_csr.rm = FPU_CSR_RD;
-	y = ieee754dp_sub(ieee754dp_zero(0), x);
-	ieee754_csr.rm = oldrm;
+	if (ieee754_csr.abs2008) {
+		y = x;
+		DPSIGN(y) = !DPSIGN(x);
+	} else {
+		unsigned int oldrm;
+
+		oldrm = ieee754_csr.rm;
+		ieee754_csr.rm = FPU_CSR_RD;
+		y = ieee754dp_sub(ieee754dp_zero(0), x);
+		ieee754_csr.rm = oldrm;
+	}
 	return y;
 }
 
 union ieee754dp ieee754dp_abs(union ieee754dp x)
 {
-	unsigned int oldrm;
 	union ieee754dp y;
 
-	oldrm = ieee754_csr.rm;
-	ieee754_csr.rm = FPU_CSR_RD;
-	if (DPSIGN(x))
-		y = ieee754dp_sub(ieee754dp_zero(0), x);
-	else
-		y = ieee754dp_add(ieee754dp_zero(0), x);
-	ieee754_csr.rm = oldrm;
+	if (ieee754_csr.abs2008) {
+		y = x;
+		DPSIGN(y) = 0;
+	} else {
+		unsigned int oldrm;
+
+		oldrm = ieee754_csr.rm;
+		ieee754_csr.rm = FPU_CSR_RD;
+		if (DPSIGN(x))
+			y = ieee754dp_sub(ieee754dp_zero(0), x);
+		else
+			y = ieee754dp_add(ieee754dp_zero(0), x);
+		ieee754_csr.rm = oldrm;
+	}
 	return y;
 }
diff --git a/arch/mips/math-emu/dp_tint.c b/arch/mips/math-emu/dp_tint.c
index 6ffc336c530e..f3985617ce31 100644
--- a/arch/mips/math-emu/dp_tint.c
+++ b/arch/mips/math-emu/dp_tint.c
@@ -38,10 +38,13 @@ int ieee754dp_tint(union ieee754dp x)
 	switch (xc) {
 	case IEEE754_CLASS_SNAN:
 	case IEEE754_CLASS_QNAN:
-	case IEEE754_CLASS_INF:
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
 		return ieee754si_indef();
 
+	case IEEE754_CLASS_INF:
+		ieee754_setcx(IEEE754_INVALID_OPERATION);
+		return ieee754si_overflow(xs);
+
 	case IEEE754_CLASS_ZERO:
 		return 0;
 
@@ -53,7 +56,7 @@ int ieee754dp_tint(union ieee754dp x)
 		/* Set invalid. We will only use overflow for floating
 		   point overflow */
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
-		return ieee754si_indef();
+		return ieee754si_overflow(xs);
 	}
 	/* oh gawd */
 	if (xe > DP_FBITS) {
@@ -93,7 +96,7 @@ int ieee754dp_tint(union ieee754dp x)
 		if ((xm >> 31) != 0 && (xs == 0 || xm != 0x80000000)) {
 			/* This can happen after rounding */
 			ieee754_setcx(IEEE754_INVALID_OPERATION);
-			return ieee754si_indef();
+			return ieee754si_overflow(xs);
 		}
 		if (round || sticky)
 			ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/math-emu/dp_tlong.c b/arch/mips/math-emu/dp_tlong.c
index 9cdc145b75e0..748fa10ed4cf 100644
--- a/arch/mips/math-emu/dp_tlong.c
+++ b/arch/mips/math-emu/dp_tlong.c
@@ -38,10 +38,13 @@ s64 ieee754dp_tlong(union ieee754dp x)
 	switch (xc) {
 	case IEEE754_CLASS_SNAN:
 	case IEEE754_CLASS_QNAN:
-	case IEEE754_CLASS_INF:
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
 		return ieee754di_indef();
 
+	case IEEE754_CLASS_INF:
+		ieee754_setcx(IEEE754_INVALID_OPERATION);
+		return ieee754di_overflow(xs);
+
 	case IEEE754_CLASS_ZERO:
 		return 0;
 
@@ -56,7 +59,7 @@ s64 ieee754dp_tlong(union ieee754dp x)
 		/* Set invalid. We will only use overflow for floating
 		   point overflow */
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
-		return ieee754di_indef();
+		return ieee754di_overflow(xs);
 	}
 	/* oh gawd */
 	if (xe > DP_FBITS) {
@@ -97,7 +100,7 @@ s64 ieee754dp_tlong(union ieee754dp x)
 		if ((xm >> 63) != 0) {
 			/* This can happen after rounding */
 			ieee754_setcx(IEEE754_INVALID_OPERATION);
-			return ieee754di_indef();
+			return ieee754di_overflow(xs);
 		}
 		if (round || sticky)
 			ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/math-emu/dsemul.c b/arch/mips/math-emu/dsemul.c
index cbb36c14b155..46b964d2b79c 100644
--- a/arch/mips/math-emu/dsemul.c
+++ b/arch/mips/math-emu/dsemul.c
@@ -31,17 +31,41 @@ struct emuframe {
 	unsigned long		epc;
 };
 
+/*
+ * Set up an emulation frame for instruction IR, from a delay slot of
+ * a branch jumping to CPC.  Return 0 if successful, -1 if no emulation
+ * required, otherwise a signal number causing a frame setup failure.
+ */
 int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 {
+	int isa16 = get_isa16_mode(regs->cp0_epc);
+	mips_instruction break_math;
 	struct emuframe __user *fr;
 	int err;
 
-	if ((get_isa16_mode(regs->cp0_epc) && ((ir >> 16) == MM_NOP16)) ||
-		(ir == 0)) {
-		/* NOP is easy */
-		regs->cp0_epc = cpc;
-		clear_delay_slot(regs);
-		return 0;
+	/* NOP is easy */
+	if (ir == 0)
+		return -1;
+
+	/* microMIPS instructions */
+	if (isa16) {
+		union mips_instruction insn = { .word = ir };
+
+		/* NOP16 aka MOVE16 $0, $0 */
+		if ((ir >> 16) == MM_NOP16)
+			return -1;
+
+		/* ADDIUPC */
+		if (insn.mm_a_format.opcode == mm_addiupc_op) {
+			unsigned int rs;
+			s32 v;
+
+			rs = (((insn.mm_a_format.rs + 0x1e) & 0xf) + 2);
+			v = regs->cp0_epc & ~3;
+			v += insn.mm_a_format.simmediate << 2;
+			regs->regs[rs] = (long)v;
+			return -1;
+		}
 	}
 
 	pr_debug("dsemul %lx %lx\n", regs->cp0_epc, cpc);
@@ -55,14 +79,10 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 	 * Algorithmics used a system call instruction, and
 	 * borrowed that vector.  MIPS/Linux version is a bit
 	 * more heavyweight in the interests of portability and
-	 * multiprocessor support.  For Linux we generate a
-	 * an unaligned access and force an address error exception.
-	 *
-	 * For embedded systems (stand-alone) we prefer to use a
-	 * non-existing CP1 instruction. This prevents us from emulating
-	 * branches, but gives us a cleaner interface to the exception
-	 * handler (single entry point).
+	 * multiprocessor support.  For Linux we use a BREAK 514
+	 * instruction causing a breakpoint exception.
 	 */
+	break_math = BREAK_MATH(isa16);
 
 	/* Ensure that the two instructions are in the same cache line */
 	fr = (struct emuframe __user *)
@@ -72,14 +92,18 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 	if (unlikely(!access_ok(VERIFY_WRITE, fr, sizeof(struct emuframe))))
 		return SIGBUS;
 
-	if (get_isa16_mode(regs->cp0_epc)) {
-		err = __put_user(ir >> 16, (u16 __user *)(&fr->emul));
-		err |= __put_user(ir & 0xffff, (u16 __user *)((long)(&fr->emul) + 2));
-		err |= __put_user(BREAK_MATH >> 16, (u16 __user *)(&fr->badinst));
-		err |= __put_user(BREAK_MATH & 0xffff, (u16 __user *)((long)(&fr->badinst) + 2));
+	if (isa16) {
+		err = __put_user(ir >> 16,
+				 (u16 __user *)(&fr->emul));
+		err |= __put_user(ir & 0xffff,
+				  (u16 __user *)((long)(&fr->emul) + 2));
+		err |= __put_user(break_math >> 16,
+				  (u16 __user *)(&fr->badinst));
+		err |= __put_user(break_math & 0xffff,
+				  (u16 __user *)((long)(&fr->badinst) + 2));
 	} else {
 		err = __put_user(ir, &fr->emul);
-		err |= __put_user((mips_instruction)BREAK_MATH, &fr->badinst);
+		err |= __put_user(break_math, &fr->badinst);
 	}
 
 	err |= __put_user((mips_instruction)BD_COOKIE, &fr->cookie);
@@ -90,8 +114,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 		return SIGBUS;
 	}
 
-	regs->cp0_epc = ((unsigned long) &fr->emul) |
-		get_isa16_mode(regs->cp0_epc);
+	regs->cp0_epc = (unsigned long)&fr->emul | isa16;
 
 	flush_cache_sigtramp((unsigned long)&fr->emul);
 
@@ -100,6 +123,7 @@ int mips_dsemul(struct pt_regs *regs, mips_instruction ir, unsigned long cpc)
 
 int do_dsemulret(struct pt_regs *xcp)
 {
+	int isa16 = get_isa16_mode(xcp->cp0_epc);
 	struct emuframe __user *fr;
 	unsigned long epc;
 	u32 insn, cookie;
@@ -122,16 +146,19 @@ int do_dsemulret(struct pt_regs *xcp)
 	 *  - Is the instruction pointed to by the EPC an BREAK_MATH?
 	 *  - Is the following memory word the BD_COOKIE?
 	 */
-	if (get_isa16_mode(xcp->cp0_epc)) {
-		err = __get_user(instr[0], (u16 __user *)(&fr->badinst));
-		err |= __get_user(instr[1], (u16 __user *)((long)(&fr->badinst) + 2));
+	if (isa16) {
+		err = __get_user(instr[0],
+				 (u16 __user *)(&fr->badinst));
+		err |= __get_user(instr[1],
+				  (u16 __user *)((long)(&fr->badinst) + 2));
 		insn = (instr[0] << 16) | instr[1];
 	} else {
 		err = __get_user(insn, &fr->badinst);
 	}
 	err |= __get_user(cookie, &fr->cookie);
 
-	if (unlikely(err || (insn != BREAK_MATH) || (cookie != BD_COOKIE))) {
+	if (unlikely(err ||
+		     insn != BREAK_MATH(isa16) || cookie != BD_COOKIE)) {
 		MIPS_FPU_EMU_INC_STATS(errors);
 		return 0;
 	}
diff --git a/arch/mips/math-emu/ieee754.c b/arch/mips/math-emu/ieee754.c
index 8e97acbbe22c..e16ae7b75dbb 100644
--- a/arch/mips/math-emu/ieee754.c
+++ b/arch/mips/math-emu/ieee754.c
@@ -59,7 +59,8 @@ const union ieee754dp __ieee754dp_spcvals[] = {
 	DPCNST(1, 3,           0x4000000000000ULL),	/* - 10.0   */
 	DPCNST(0, DP_EMAX + 1, 0x0000000000000ULL),	/* + infinity */
 	DPCNST(1, DP_EMAX + 1, 0x0000000000000ULL),	/* - infinity */
-	DPCNST(0, DP_EMAX + 1, 0x7FFFFFFFFFFFFULL),	/* + indef quiet Nan */
+	DPCNST(0, DP_EMAX + 1, 0x7FFFFFFFFFFFFULL),	/* + ind legacy qNaN */
+	DPCNST(0, DP_EMAX + 1, 0x8000000000000ULL),	/* + indef 2008 qNaN */
 	DPCNST(0, DP_EMAX,     0xFFFFFFFFFFFFFULL),	/* + max */
 	DPCNST(1, DP_EMAX,     0xFFFFFFFFFFFFFULL),	/* - max */
 	DPCNST(0, DP_EMIN,     0x0000000000000ULL),	/* + min normal */
@@ -82,7 +83,8 @@ const union ieee754sp __ieee754sp_spcvals[] = {
 	SPCNST(1, 3,	       0x200000),	/* - 10.0   */
 	SPCNST(0, SP_EMAX + 1, 0x000000),	/* + infinity */
 	SPCNST(1, SP_EMAX + 1, 0x000000),	/* - infinity */
-	SPCNST(0, SP_EMAX + 1, 0x3FFFFF),	/* + indef quiet Nan  */
+	SPCNST(0, SP_EMAX + 1, 0x3FFFFF),	/* + indef legacy quiet NaN */
+	SPCNST(0, SP_EMAX + 1, 0x400000),	/* + indef 2008 quiet NaN */
 	SPCNST(0, SP_EMAX,     0x7FFFFF),	/* + max normal */
 	SPCNST(1, SP_EMAX,     0x7FFFFF),	/* - max normal */
 	SPCNST(0, SP_EMIN,     0x000000),	/* + min normal */
diff --git a/arch/mips/math-emu/ieee754.h b/arch/mips/math-emu/ieee754.h
index df94720714c7..d3be351aed15 100644
--- a/arch/mips/math-emu/ieee754.h
+++ b/arch/mips/math-emu/ieee754.h
@@ -221,15 +221,16 @@ union ieee754dp ieee754dp_dump(char *s, union ieee754dp x);
 #define IEEE754_SPCVAL_NTEN		5	/* -10.0 */
 #define IEEE754_SPCVAL_PINFINITY	6	/* +inf */
 #define IEEE754_SPCVAL_NINFINITY	7	/* -inf */
-#define IEEE754_SPCVAL_INDEF		8	/* quiet NaN */
-#define IEEE754_SPCVAL_PMAX		9	/* +max norm */
-#define IEEE754_SPCVAL_NMAX		10	/* -max norm */
-#define IEEE754_SPCVAL_PMIN		11	/* +min norm */
-#define IEEE754_SPCVAL_NMIN		12	/* -min norm */
-#define IEEE754_SPCVAL_PMIND		13	/* +min denorm */
-#define IEEE754_SPCVAL_NMIND		14	/* -min denorm */
-#define IEEE754_SPCVAL_P1E31		15	/* + 1.0e31 */
-#define IEEE754_SPCVAL_P1E63		16	/* + 1.0e63 */
+#define IEEE754_SPCVAL_INDEF_LEG	8	/* legacy quiet NaN */
+#define IEEE754_SPCVAL_INDEF_2008	9	/* IEEE 754-2008 quiet NaN */
+#define IEEE754_SPCVAL_PMAX		10	/* +max norm */
+#define IEEE754_SPCVAL_NMAX		11	/* -max norm */
+#define IEEE754_SPCVAL_PMIN		12	/* +min norm */
+#define IEEE754_SPCVAL_NMIN		13	/* -min norm */
+#define IEEE754_SPCVAL_PMIND		14	/* +min denorm */
+#define IEEE754_SPCVAL_NMIND		15	/* -min denorm */
+#define IEEE754_SPCVAL_P1E31		16	/* + 1.0e31 */
+#define IEEE754_SPCVAL_P1E63		17	/* + 1.0e63 */
 
 extern const union ieee754dp __ieee754dp_spcvals[];
 extern const union ieee754sp __ieee754sp_spcvals[];
@@ -243,7 +244,8 @@ extern const union ieee754sp __ieee754sp_spcvals[];
 #define ieee754dp_zero(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
 #define ieee754dp_one(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
 #define ieee754dp_ten(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754dp_indef()	(ieee754dp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754dp_indef()	(ieee754dp_spcvals[IEEE754_SPCVAL_INDEF_LEG + \
+						   ieee754_csr.nan2008])
 #define ieee754dp_max(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
 #define ieee754dp_min(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
 #define ieee754dp_mind(sn)	(ieee754dp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
@@ -254,7 +256,8 @@ extern const union ieee754sp __ieee754sp_spcvals[];
 #define ieee754sp_zero(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PZERO+(sn)])
 #define ieee754sp_one(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PONE+(sn)])
 #define ieee754sp_ten(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PTEN+(sn)])
-#define ieee754sp_indef()	(ieee754sp_spcvals[IEEE754_SPCVAL_INDEF])
+#define ieee754sp_indef()	(ieee754sp_spcvals[IEEE754_SPCVAL_INDEF_LEG + \
+						   ieee754_csr.nan2008])
 #define ieee754sp_max(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMAX+(sn)])
 #define ieee754sp_min(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMIN+(sn)])
 #define ieee754sp_mind(sn)	(ieee754sp_spcvals[IEEE754_SPCVAL_PMIND+(sn)])
@@ -266,12 +269,25 @@ extern const union ieee754sp __ieee754sp_spcvals[];
  */
 static inline int ieee754si_indef(void)
 {
-	return INT_MAX;
+	return ieee754_csr.nan2008 ? 0 : INT_MAX;
 }
 
 static inline s64 ieee754di_indef(void)
 {
-	return S64_MAX;
+	return ieee754_csr.nan2008 ? 0 : S64_MAX;
+}
+
+/*
+ * Overflow integer value
+ */
+static inline int ieee754si_overflow(int xs)
+{
+	return ieee754_csr.nan2008 && xs ? INT_MIN : INT_MAX;
+}
+
+static inline s64 ieee754di_overflow(int xs)
+{
+	return ieee754_csr.nan2008 && xs ? S64_MIN : S64_MAX;
 }
 
 /* result types for xctx.rt */
diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c
index 522d843f2ffd..47d26c805eac 100644
--- a/arch/mips/math-emu/ieee754dp.c
+++ b/arch/mips/math-emu/ieee754dp.c
@@ -37,8 +37,11 @@ static inline int ieee754dp_isnan(union ieee754dp x)
 
 static inline int ieee754dp_issnan(union ieee754dp x)
 {
+	int qbit;
+
 	assert(ieee754dp_isnan(x));
-	return (DPMANT(x) & DP_MBIT(DP_FBITS - 1)) == DP_MBIT(DP_FBITS - 1);
+	qbit = (DPMANT(x) & DP_MBIT(DP_FBITS - 1)) == DP_MBIT(DP_FBITS - 1);
+	return ieee754_csr.nan2008 ^ qbit;
 }
 
 
@@ -51,7 +54,12 @@ union ieee754dp __cold ieee754dp_nanxcpt(union ieee754dp r)
 	assert(ieee754dp_issnan(r));
 
 	ieee754_setcx(IEEE754_INVALID_OPERATION);
-	return ieee754dp_indef();
+	if (ieee754_csr.nan2008)
+		DPMANT(r) |= DP_MBIT(DP_FBITS - 1);
+	else
+		r = ieee754dp_indef();
+
+	return r;
 }
 
 static u64 ieee754dp_get_rounding(int sn, u64 xm)
@@ -89,7 +97,7 @@ union ieee754dp ieee754dp_format(int sn, int xe, u64 xm)
 {
 	assert(xm);		/* we don't gen exact zeros (probably should) */
 
-	assert((xm >> (DP_FBITS + 1 + 3)) == 0);	/* no execess */
+	assert((xm >> (DP_FBITS + 1 + 3)) == 0);	/* no excess */
 	assert(xm & (DP_HIDDEN_BIT << 3));
 
 	if (xe < DP_EMIN) {
@@ -157,7 +165,7 @@ union ieee754dp ieee754dp_format(int sn, int xe, u64 xm)
 	/* strip grs bits */
 	xm >>= 3;
 
-	assert((xm >> (DP_FBITS + 1)) == 0);	/* no execess */
+	assert((xm >> (DP_FBITS + 1)) == 0);	/* no excess */
 	assert(xe >= DP_EMIN);
 
 	if (xe > DP_EMAX) {
@@ -190,7 +198,7 @@ union ieee754dp ieee754dp_format(int sn, int xe, u64 xm)
 			ieee754_setcx(IEEE754_UNDERFLOW);
 		return builddp(sn, DP_EMIN - 1 + DP_EBIAS, xm);
 	} else {
-		assert((xm >> (DP_FBITS + 1)) == 0);	/* no execess */
+		assert((xm >> (DP_FBITS + 1)) == 0);	/* no excess */
 		assert(xm & DP_HIDDEN_BIT);
 
 		return builddp(sn, xe + DP_EBIAS, xm & ~DP_HIDDEN_BIT);
diff --git a/arch/mips/math-emu/ieee754int.h b/arch/mips/math-emu/ieee754int.h
index 6383e2c5c1ad..ed7bb277b3e0 100644
--- a/arch/mips/math-emu/ieee754int.h
+++ b/arch/mips/math-emu/ieee754int.h
@@ -63,10 +63,10 @@ static inline int ieee754_class_nan(int xc)
 	if (ve == SP_EMAX+1+SP_EBIAS) {					\
 		if (vm == 0)						\
 			vc = IEEE754_CLASS_INF;				\
-		else if (vm & SP_MBIT(SP_FBITS-1))			\
-			vc = IEEE754_CLASS_SNAN;			\
-		else							\
+		else if (ieee754_csr.nan2008 ^ !(vm & SP_MBIT(SP_FBITS - 1))) \
 			vc = IEEE754_CLASS_QNAN;			\
+		else							\
+			vc = IEEE754_CLASS_SNAN;			\
 	} else if (ve == SP_EMIN-1+SP_EBIAS) {				\
 		if (vm) {						\
 			ve = SP_EMIN;					\
@@ -97,10 +97,10 @@ static inline int ieee754_class_nan(int xc)
 	if (ve == DP_EMAX+1+DP_EBIAS) {					\
 		if (vm == 0)						\
 			vc = IEEE754_CLASS_INF;				\
-		else if (vm & DP_MBIT(DP_FBITS-1))			\
-			vc = IEEE754_CLASS_SNAN;			\
-		else							\
+		else if (ieee754_csr.nan2008 ^ !(vm & DP_MBIT(DP_FBITS - 1))) \
 			vc = IEEE754_CLASS_QNAN;			\
+		else							\
+			vc = IEEE754_CLASS_SNAN;			\
 	} else if (ve == DP_EMIN-1+DP_EBIAS) {				\
 		if (vm) {						\
 			ve = DP_EMIN;					\
diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c
index ca8e35e33bf7..e0b2c450b963 100644
--- a/arch/mips/math-emu/ieee754sp.c
+++ b/arch/mips/math-emu/ieee754sp.c
@@ -37,8 +37,11 @@ static inline int ieee754sp_isnan(union ieee754sp x)
 
 static inline int ieee754sp_issnan(union ieee754sp x)
 {
+	int qbit;
+
 	assert(ieee754sp_isnan(x));
-	return SPMANT(x) & SP_MBIT(SP_FBITS - 1);
+	qbit = (SPMANT(x) & SP_MBIT(SP_FBITS - 1)) == SP_MBIT(SP_FBITS - 1);
+	return ieee754_csr.nan2008 ^ qbit;
 }
 
 
@@ -51,7 +54,12 @@ union ieee754sp __cold ieee754sp_nanxcpt(union ieee754sp r)
 	assert(ieee754sp_issnan(r));
 
 	ieee754_setcx(IEEE754_INVALID_OPERATION);
-	return ieee754sp_indef();
+	if (ieee754_csr.nan2008)
+		SPMANT(r) |= SP_MBIT(SP_FBITS - 1);
+	else
+		r = ieee754sp_indef();
+
+	return r;
 }
 
 static unsigned ieee754sp_get_rounding(int sn, unsigned xm)
@@ -89,7 +97,7 @@ union ieee754sp ieee754sp_format(int sn, int xe, unsigned xm)
 {
 	assert(xm);		/* we don't gen exact zeros (probably should) */
 
-	assert((xm >> (SP_FBITS + 1 + 3)) == 0);	/* no execess */
+	assert((xm >> (SP_FBITS + 1 + 3)) == 0);	/* no excess */
 	assert(xm & (SP_HIDDEN_BIT << 3));
 
 	if (xe < SP_EMIN) {
@@ -155,7 +163,7 @@ union ieee754sp ieee754sp_format(int sn, int xe, unsigned xm)
 	/* strip grs bits */
 	xm >>= 3;
 
-	assert((xm >> (SP_FBITS + 1)) == 0);	/* no execess */
+	assert((xm >> (SP_FBITS + 1)) == 0);	/* no excess */
 	assert(xe >= SP_EMIN);
 
 	if (xe > SP_EMAX) {
@@ -188,7 +196,7 @@ union ieee754sp ieee754sp_format(int sn, int xe, unsigned xm)
 			ieee754_setcx(IEEE754_UNDERFLOW);
 		return buildsp(sn, SP_EMIN - 1 + SP_EBIAS, xm);
 	} else {
-		assert((xm >> (SP_FBITS + 1)) == 0);	/* no execess */
+		assert((xm >> (SP_FBITS + 1)) == 0);	/* no excess */
 		assert(xm & SP_HIDDEN_BIT);
 
 		return buildsp(sn, xe + SP_EBIAS, xm & ~SP_HIDDEN_BIT);
diff --git a/arch/mips/math-emu/me-debugfs.c b/arch/mips/math-emu/me-debugfs.c
index 506a67a98cdf..be650ed7db59 100644
--- a/arch/mips/math-emu/me-debugfs.c
+++ b/arch/mips/math-emu/me-debugfs.c
@@ -4,6 +4,7 @@
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/types.h>
+#include <asm/debug.h>
 #include <asm/fpu_emulator.h>
 #include <asm/local.h>
 
@@ -27,7 +28,6 @@ static int fpuemu_stat_get(void *data, u64 *val)
 }
 DEFINE_SIMPLE_ATTRIBUTE(fops_fpuemu_stat, fpuemu_stat_get, NULL, "%llu\n");
 
-extern struct dentry *mips_debugfs_dir;
 static int __init debugfs_fpuemu(void)
 {
 	struct dentry *d, *dir;
diff --git a/arch/mips/math-emu/sp_fdp.c b/arch/mips/math-emu/sp_fdp.c
index 3797148893ad..5060e8fdcb0b 100644
--- a/arch/mips/math-emu/sp_fdp.c
+++ b/arch/mips/math-emu/sp_fdp.c
@@ -44,13 +44,16 @@ union ieee754sp ieee754sp_fdp(union ieee754dp x)
 
 	switch (xc) {
 	case IEEE754_CLASS_SNAN:
-		return ieee754sp_nanxcpt(ieee754sp_nan_fdp(xs, xm));
-
+		x = ieee754dp_nanxcpt(x);
+		EXPLODEXDP;
+		/* Fall through.  */
 	case IEEE754_CLASS_QNAN:
 		y = ieee754sp_nan_fdp(xs, xm);
-		EXPLODEYSP;
-		if (!ieee754_class_nan(yc))
-			y = ieee754sp_indef();
+		if (!ieee754_csr.nan2008) {
+			EXPLODEYSP;
+			if (!ieee754_class_nan(yc))
+				y = ieee754sp_indef();
+		}
 		return y;
 
 	case IEEE754_CLASS_INF:
diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c
index c50e9451f2d2..756c9cf2dfd2 100644
--- a/arch/mips/math-emu/sp_simple.c
+++ b/arch/mips/math-emu/sp_simple.c
@@ -23,27 +23,39 @@
 
 union ieee754sp ieee754sp_neg(union ieee754sp x)
 {
-	unsigned int oldrm;
 	union ieee754sp y;
 
-	oldrm = ieee754_csr.rm;
-	ieee754_csr.rm = FPU_CSR_RD;
-	y = ieee754sp_sub(ieee754sp_zero(0), x);
-	ieee754_csr.rm = oldrm;
+	if (ieee754_csr.abs2008) {
+		y = x;
+		SPSIGN(y) = !SPSIGN(x);
+	} else {
+		unsigned int oldrm;
+
+		oldrm = ieee754_csr.rm;
+		ieee754_csr.rm = FPU_CSR_RD;
+		y = ieee754sp_sub(ieee754sp_zero(0), x);
+		ieee754_csr.rm = oldrm;
+	}
 	return y;
 }
 
 union ieee754sp ieee754sp_abs(union ieee754sp x)
 {
-	unsigned int oldrm;
 	union ieee754sp y;
 
-	oldrm = ieee754_csr.rm;
-	ieee754_csr.rm = FPU_CSR_RD;
-	if (SPSIGN(x))
-		y = ieee754sp_sub(ieee754sp_zero(0), x);
-	else
-		y = ieee754sp_add(ieee754sp_zero(0), x);
-	ieee754_csr.rm = oldrm;
+	if (ieee754_csr.abs2008) {
+		y = x;
+		SPSIGN(y) = 0;
+	} else {
+		unsigned int oldrm;
+
+		oldrm = ieee754_csr.rm;
+		ieee754_csr.rm = FPU_CSR_RD;
+		if (SPSIGN(x))
+			y = ieee754sp_sub(ieee754sp_zero(0), x);
+		else
+			y = ieee754sp_add(ieee754sp_zero(0), x);
+		ieee754_csr.rm = oldrm;
+	}
 	return y;
 }
diff --git a/arch/mips/math-emu/sp_tint.c b/arch/mips/math-emu/sp_tint.c
index 091299a31798..f4b4cabfe2e1 100644
--- a/arch/mips/math-emu/sp_tint.c
+++ b/arch/mips/math-emu/sp_tint.c
@@ -38,10 +38,13 @@ int ieee754sp_tint(union ieee754sp x)
 	switch (xc) {
 	case IEEE754_CLASS_SNAN:
 	case IEEE754_CLASS_QNAN:
-	case IEEE754_CLASS_INF:
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
 		return ieee754si_indef();
 
+	case IEEE754_CLASS_INF:
+		ieee754_setcx(IEEE754_INVALID_OPERATION);
+		return ieee754si_overflow(xs);
+
 	case IEEE754_CLASS_ZERO:
 		return 0;
 
@@ -56,7 +59,7 @@ int ieee754sp_tint(union ieee754sp x)
 		/* Set invalid. We will only use overflow for floating
 		   point overflow */
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
-		return ieee754si_indef();
+		return ieee754si_overflow(xs);
 	}
 	/* oh gawd */
 	if (xe > SP_FBITS) {
@@ -97,7 +100,7 @@ int ieee754sp_tint(union ieee754sp x)
 		if ((xm >> 31) != 0) {
 			/* This can happen after rounding */
 			ieee754_setcx(IEEE754_INVALID_OPERATION);
-			return ieee754si_indef();
+			return ieee754si_overflow(xs);
 		}
 		if (round || sticky)
 			ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/math-emu/sp_tlong.c b/arch/mips/math-emu/sp_tlong.c
index 9f3c742c1cea..a2450c7e452a 100644
--- a/arch/mips/math-emu/sp_tlong.c
+++ b/arch/mips/math-emu/sp_tlong.c
@@ -39,10 +39,13 @@ s64 ieee754sp_tlong(union ieee754sp x)
 	switch (xc) {
 	case IEEE754_CLASS_SNAN:
 	case IEEE754_CLASS_QNAN:
-	case IEEE754_CLASS_INF:
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
 		return ieee754di_indef();
 
+	case IEEE754_CLASS_INF:
+		ieee754_setcx(IEEE754_INVALID_OPERATION);
+		return ieee754di_overflow(xs);
+
 	case IEEE754_CLASS_ZERO:
 		return 0;
 
@@ -57,7 +60,7 @@ s64 ieee754sp_tlong(union ieee754sp x)
 		/* Set invalid. We will only use overflow for floating
 		   point overflow */
 		ieee754_setcx(IEEE754_INVALID_OPERATION);
-		return ieee754di_indef();
+		return ieee754di_overflow(xs);
 	}
 	/* oh gawd */
 	if (xe > SP_FBITS) {
@@ -94,7 +97,7 @@ s64 ieee754sp_tlong(union ieee754sp x)
 		if ((xm >> 63) != 0) {
 			/* This can happen after rounding */
 			ieee754_setcx(IEEE754_INVALID_OPERATION);
-			return ieee754di_indef();
+			return ieee754di_overflow(xs);
 		}
 		if (round || sticky)
 			ieee754_setcx(IEEE754_INEXACT);
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 67ede4ef9b8d..b4c64bd3f723 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)	+= sc-r5k.o
 obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o
 obj-$(CONFIG_MIPS_CPU_SCACHE)	+= sc-mips.o
+obj-$(CONFIG_SCACHE_DEBUGFS)	+= sc-debugfs.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5d3a25e1cfae..caac3d747a90 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -587,7 +587,8 @@ static inline void local_r4k_flush_cache_page(void *args)
 		 * another ASID than the current one.
 		 */
 		map_coherent = (cpu_has_dc_aliases &&
-				page_mapped(page) && !Page_dcache_dirty(page));
+				page_mapcount(page) &&
+				!Page_dcache_dirty(page));
 		if (map_coherent)
 			vaddr = kmap_coherent(page, addr);
 		else
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index aab218c36e0d..3f159caf6dbc 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -106,7 +106,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 	unsigned long addr = (unsigned long) page_address(page);
 
 	if (pages_do_alias(addr, vmaddr)) {
-		if (page_mapped(page) && !Page_dcache_dirty(page)) {
+		if (page_mapcount(page) && !Page_dcache_dirty(page)) {
 			void *kaddr;
 
 			kaddr = kmap_coherent(page, vmaddr);
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index d8117be729a2..730d394ce5f0 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -145,7 +145,7 @@ static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
 
 	gfp = massage_gfp_flags(dev, gfp);
 
-	if (IS_ENABLED(CONFIG_DMA_CMA) && !(gfp & GFP_ATOMIC))
+	if (IS_ENABLED(CONFIG_DMA_CMA) && gfpflags_allow_blocking(gfp))
 		page = dma_alloc_from_contiguous(dev,
 					count, get_order(size));
 	if (!page)
diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c
index 349995d19c7f..42d124fb6474 100644
--- a/arch/mips/mm/gup.c
+++ b/arch/mips/mm/gup.c
@@ -64,7 +64,7 @@ static inline void get_head_page_multiple(struct page *page, int nr)
 {
 	VM_BUG_ON(page != compound_head(page));
 	VM_BUG_ON(page_count(page) == 0);
-	atomic_add(nr, &page->_count);
+	page_ref_add(page, nr);
 	SetPageReferenced(page);
 }
 
@@ -87,8 +87,6 @@ static int gup_huge_pmd(pmd_t pmd, unsigned long addr, unsigned long end,
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
-		if (PageTail(page))
-			get_huge_page_tail(page);
 		(*nr)++;
 		page++;
 		refs++;
@@ -109,18 +107,7 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
 		pmd_t pmd = *pmdp;
 
 		next = pmd_addr_end(addr, end);
-		/*
-		 * The pmd_trans_splitting() check below explains why
-		 * pmdp_splitting_flush has to flush the tlb, to stop
-		 * this gup-fast code from running while we set the
-		 * splitting bit in the pmd. Returning zero will take
-		 * the slow path that will call wait_split_huge_page()
-		 * if the pmd is still in splitting state. gup-fast
-		 * can't because it has irq disabled and
-		 * wait_split_huge_page() would never return as the
-		 * tlb flush IPI wouldn't run.
-		 */
-		if (pmd_none(pmd) || pmd_trans_splitting(pmd))
+		if (pmd_none(pmd))
 			return 0;
 		if (unlikely(pmd_huge(pmd))) {
 			if (!gup_huge_pmd(pmd, addr, next, write, pages,nr))
@@ -153,8 +140,6 @@ static int gup_huge_pud(pud_t pud, unsigned long addr, unsigned long end,
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
-		if (PageTail(page))
-			get_huge_page_tail(page);
 		(*nr)++;
 		page++;
 		refs++;
@@ -301,8 +286,7 @@ slow_irqon:
 	start += nr << PAGE_SHIFT;
 	pages += nr;
 
-	ret = get_user_pages_unlocked(current, mm, start,
-				      (end - start) >> PAGE_SHIFT,
+	ret = get_user_pages_unlocked(start, (end - start) >> PAGE_SHIFT,
 				      write, 0, pages);
 
 	/* Have to be a bit careful with return values */
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 11661cbc11a8..d7258a103439 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -118,19 +118,6 @@ void *kmap_atomic_pfn(unsigned long pfn)
 	return (void*) vaddr;
 }
 
-struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long idx, vaddr = (unsigned long)ptr;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-
 void __init kmap_init(void)
 {
 	unsigned long kmap_vstart;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 8770e619185e..7e5fa0938c21 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -165,7 +165,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 
 	vto = kmap_atomic(to);
 	if (cpu_has_dc_aliases &&
-	    page_mapped(from) && !Page_dcache_dirty(from)) {
+	    page_mapcount(from) && !Page_dcache_dirty(from)) {
 		vfrom = kmap_coherent(from, vaddr);
 		copy_page(vto, vfrom);
 		kunmap_coherent();
@@ -187,7 +187,7 @@ void copy_to_user_page(struct vm_area_struct *vma,
 	unsigned long len)
 {
 	if (cpu_has_dc_aliases &&
-	    page_mapped(page) && !Page_dcache_dirty(page)) {
+	    page_mapcount(page) && !Page_dcache_dirty(page)) {
 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(vto, src, len);
 		kunmap_coherent();
@@ -205,7 +205,7 @@ void copy_from_user_page(struct vm_area_struct *vma,
 	unsigned long len)
 {
 	if (cpu_has_dc_aliases &&
-	    page_mapped(page) && !Page_dcache_dirty(page)) {
+	    page_mapcount(page) && !Page_dcache_dirty(page)) {
 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(dst, vfrom, len);
 		kunmap_coherent();
diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c
index 5c81fdd032c3..353037699512 100644
--- a/arch/mips/mm/mmap.c
+++ b/arch/mips/mm/mmap.c
@@ -146,7 +146,7 @@ unsigned long arch_mmap_rnd(void)
 {
 	unsigned long rnd;
 
-	rnd = (unsigned long)get_random_int();
+	rnd = get_random_long();
 	rnd <<= PAGE_SHIFT;
 	if (TASK_IS_32BIT_ADDR)
 		rnd &= 0xfffffful;
@@ -174,7 +174,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 
 static inline unsigned long brk_rnd(void)
 {
-	unsigned long rnd = get_random_int();
+	unsigned long rnd = get_random_long();
 
 	rnd = rnd << PAGE_SHIFT;
 	/* 8MB for 32bit, 256MB for 64bit */
diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c
index e8adc0069d66..ce4473e7c0d2 100644
--- a/arch/mips/mm/pgtable-64.c
+++ b/arch/mips/mm/pgtable-64.c
@@ -62,20 +62,6 @@ void pmd_init(unsigned long addr, unsigned long pagetable)
 }
 #endif
 
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-
-void pmdp_splitting_flush(struct vm_area_struct *vma,
-			 unsigned long address,
-			 pmd_t *pmdp)
-{
-	if (!pmd_trans_splitting(*pmdp)) {
-		pmd_t pmd = pmd_mksplitting(*pmdp);
-		set_pmd_at(vma->vm_mm, address, pmdp, pmd);
-	}
-}
-
-#endif
-
 pmd_t mk_pmd(struct page *page, pgprot_t prot)
 {
 	pmd_t pmd;
diff --git a/arch/mips/mm/sc-debugfs.c b/arch/mips/mm/sc-debugfs.c
new file mode 100644
index 000000000000..5eefe3281b24
--- /dev/null
+++ b/arch/mips/mm/sc-debugfs.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/bcache.h>
+#include <asm/debug.h>
+#include <asm/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/init.h>
+
+static ssize_t sc_prefetch_read(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	bool enabled = bc_prefetch_is_enabled();
+	char buf[3];
+
+	buf[0] = enabled ? 'Y' : 'N';
+	buf[1] = '\n';
+	buf[2] = 0;
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
+}
+
+static ssize_t sc_prefetch_write(struct file *file,
+				 const char __user *user_buf,
+				 size_t count, loff_t *ppos)
+{
+	char buf[32];
+	ssize_t buf_size;
+	bool enabled;
+	int err;
+
+	buf_size = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	buf[buf_size] = '\0';
+	err = strtobool(buf, &enabled);
+	if (err)
+		return err;
+
+	if (enabled)
+		bc_prefetch_enable();
+	else
+		bc_prefetch_disable();
+
+	return count;
+}
+
+static const struct file_operations sc_prefetch_fops = {
+	.open = simple_open,
+	.llseek = default_llseek,
+	.read = sc_prefetch_read,
+	.write = sc_prefetch_write,
+};
+
+static int __init sc_debugfs_init(void)
+{
+	struct dentry *dir, *file;
+
+	if (!mips_debugfs_dir)
+		return -ENODEV;
+
+	dir = debugfs_create_dir("l2cache", mips_debugfs_dir);
+	if (IS_ERR(dir))
+		return PTR_ERR(dir);
+
+	file = debugfs_create_file("prefetch", S_IRUGO | S_IWUSR, dir,
+				   NULL, &sc_prefetch_fops);
+	if (IS_ERR(file))
+		return PTR_ERR(file);
+
+	return 0;
+}
+late_initcall(sc_debugfs_init);
diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c
index dc7c5a5214a9..026cb59a914d 100644
--- a/arch/mips/mm/sc-ip22.c
+++ b/arch/mips/mm/sc-ip22.c
@@ -158,7 +158,7 @@ static inline int __init indy_sc_probe(void)
 	return 1;
 }
 
-/* XXX Check with wje if the Indy caches can differenciate between
+/* XXX Check with wje if the Indy caches can differentiate between
    writeback + invalidate and just invalidate.	*/
 static struct bcache_ops indy_sc_ops = {
 	.bc_enable = indy_sc_enable,
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 53ea8391f9bb..91dec32c77b7 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -51,11 +51,69 @@ static void mips_sc_disable(void)
 	/* L2 cache is permanently enabled */
 }
 
+static void mips_sc_prefetch_enable(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return;
+
+	/*
+	 * If there is one or more L2 prefetch unit present then enable
+	 * prefetching for both code & data, for all ports.
+	 */
+	pftctl = read_gcr_l2_pft_control();
+	if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK) {
+		pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
+		pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
+		pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
+		write_gcr_l2_pft_control(pftctl);
+
+		pftctl = read_gcr_l2_pft_control_b();
+		pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
+		pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
+		write_gcr_l2_pft_control_b(pftctl);
+	}
+}
+
+static void mips_sc_prefetch_disable(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return;
+
+	pftctl = read_gcr_l2_pft_control();
+	pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
+	write_gcr_l2_pft_control(pftctl);
+
+	pftctl = read_gcr_l2_pft_control_b();
+	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
+	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
+	write_gcr_l2_pft_control_b(pftctl);
+}
+
+static bool mips_sc_prefetch_is_enabled(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return false;
+
+	pftctl = read_gcr_l2_pft_control();
+	if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK))
+		return false;
+	return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN_MSK);
+}
+
 static struct bcache_ops mips_sc_ops = {
 	.bc_enable = mips_sc_enable,
 	.bc_disable = mips_sc_disable,
 	.bc_wback_inv = mips_sc_wback_inv,
-	.bc_inv = mips_sc_inv
+	.bc_inv = mips_sc_inv,
+	.bc_prefetch_enable = mips_sc_prefetch_enable,
+	.bc_prefetch_disable = mips_sc_prefetch_disable,
+	.bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled,
 };
 
 /*
@@ -106,11 +164,13 @@ static int __init mips_sc_probe_cm3(void)
 
 	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE_MSK;
 	sets >>= CM_GCR_L2_CONFIG_SET_SIZE_SHF;
-	c->scache.sets = 64 << sets;
+	if (sets)
+		c->scache.sets = 64 << sets;
 
 	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE_MSK;
 	line_sz >>= CM_GCR_L2_CONFIG_LINE_SIZE_SHF;
-	c->scache.linesz = 2 << line_sz;
+	if (line_sz)
+		c->scache.linesz = 2 << line_sz;
 
 	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC_MSK;
 	assoc >>= CM_GCR_L2_CONFIG_ASSOC_SHF;
@@ -118,13 +178,12 @@ static int __init mips_sc_probe_cm3(void)
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);
 
-	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
-
-	return 1;
-}
+	if (c->scache.linesz) {
+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+		return 1;
+	}
 
-void __weak platform_early_l2_init(void)
-{
+	return 0;
 }
 
 static inline int __init mips_sc_probe(void)
@@ -136,12 +195,6 @@ static inline int __init mips_sc_probe(void)
 	/* Mark as not present until probe completed */
 	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
 
-	/*
-	 * Do we need some platform specific probing before
-	 * we configure L2?
-	 */
-	platform_early_l2_init();
-
 	if (mips_cm_revision() >= CM_REV_CM3)
 		return mips_sc_probe_cm3();
 
@@ -162,13 +215,13 @@ static inline int __init mips_sc_probe(void)
 		return 0;
 
 	tmp = (config2 >> 8) & 0x0f;
-	if (0 <= tmp && tmp <= 7)
+	if (tmp <= 7)
 		c->scache.sets = 64 << tmp;
 	else
 		return 0;
 
 	tmp = (config2 >> 0) & 0x0f;
-	if (0 <= tmp && tmp <= 7)
+	if (tmp <= 7)
 		c->scache.ways = tmp + 1;
 	else
 		return 0;
@@ -186,6 +239,7 @@ int mips_sc_init(void)
 	int found = mips_sc_probe();
 	if (found) {
 		mips_sc_enable();
+		mips_sc_prefetch_enable();
 		bcops = &mips_sc_ops;
 	}
 	return found;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 5037d5868cef..c17d7627f872 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -19,6 +19,7 @@
 #include <asm/cpu.h>
 #include <asm/cpu-type.h>
 #include <asm/bootinfo.h>
+#include <asm/hazards.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 #include <asm/tlb.h>
@@ -486,6 +487,10 @@ static void r4k_tlb_configure(void)
 	 *     be set to fixed-size pages.
 	 */
 	write_c0_pagemask(PM_DEFAULT_MASK);
+	back_to_back_c0_hazard();
+	if (read_c0_pagemask() != PM_DEFAULT_MASK)
+		panic("MMU doesn't support PAGE_SIZE=0x%lx", PAGE_SIZE);
+
 	write_c0_wired(0);
 	if (current_cpu_type() == CPU_R10000 ||
 	    current_cpu_type() == CPU_R12000 ||
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 323d1d302f2b..84c6e3fda84a 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -12,7 +12,7 @@
  * Copyright (C) 2011  MIPS Technologies, Inc.
  *
  * ... and the days got worse and worse and now you see
- * I've gone completly out of my mind.
+ * I've gone completely out of my mind.
  *
  * They're coming to take me a away haha
  * they're coming to take me a away hoho hihi haha
@@ -240,9 +240,8 @@ static void output_pgtable_bits_defines(void)
 	pr_define("_PAGE_MODIFIED_SHIFT %d\n", _PAGE_MODIFIED_SHIFT);
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
 	pr_define("_PAGE_HUGE_SHIFT %d\n", _PAGE_HUGE_SHIFT);
-	pr_define("_PAGE_SPLITTING_SHIFT %d\n", _PAGE_SPLITTING_SHIFT);
 #endif
-#ifdef CONFIG_CPU_MIPSR2
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)
 	if (cpu_has_rixi) {
 #ifdef _PAGE_NO_EXEC_SHIFT
 		pr_define("_PAGE_NO_EXEC_SHIFT %d\n", _PAGE_NO_EXEC_SHIFT);
@@ -311,6 +310,7 @@ static struct uasm_label labels[128];
 static struct uasm_reloc relocs[128];
 
 static int check_for_high_segbits;
+static bool fill_includes_sw_bits;
 
 static unsigned int kscratch_used_mask;
 
@@ -630,8 +630,14 @@ static void build_tlb_write_entry(u32 **p, struct uasm_label **l,
 static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 							unsigned int reg)
 {
-	if (cpu_has_rixi) {
-		UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
+	if (cpu_has_rixi && _PAGE_NO_EXEC) {
+		if (fill_includes_sw_bits) {
+			UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
+		} else {
+			UASM_i_SRL(p, reg, reg, ilog2(_PAGE_NO_EXEC));
+			UASM_i_ROTR(p, reg, reg,
+				    ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
+		}
 	} else {
 #ifdef CONFIG_PHYS_ADDR_T_64BIT
 		uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
@@ -1005,21 +1011,7 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
 	 * 64bit address support (36bit on a 32bit CPU) in a 32bit
 	 * Kernel is a special case. Only a few CPUs use it.
 	 */
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-	if (cpu_has_64bits) {
-		uasm_i_ld(p, tmp, 0, ptep); /* get even pte */
-		uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
-		if (cpu_has_rixi) {
-			UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL));
-			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-			UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL));
-		} else {
-			uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
-			UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-			uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
-		}
-		UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
-	} else {
+	if (config_enabled(CONFIG_PHYS_ADDR_T_64BIT) && !cpu_has_64bits) {
 		int pte_off_even = sizeof(pte_t) / 2;
 		int pte_off_odd = pte_off_even + sizeof(pte_t);
 #ifdef CONFIG_XPA
@@ -1043,31 +1035,23 @@ static void build_update_entries(u32 **p, unsigned int tmp, unsigned int ptep)
 		uasm_i_mthc0(p, tmp, C0_ENTRYLO0);
 		uasm_i_mthc0(p, ptep, C0_ENTRYLO1);
 #endif
+		return;
 	}
-#else
+
 	UASM_i_LW(p, tmp, 0, ptep); /* get even pte */
 	UASM_i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */
 	if (r45k_bvahwbug())
 		build_tlb_probe_entry(p);
-	if (cpu_has_rixi) {
-		UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL));
-		if (r4k_250MHZhwbug())
-			UASM_i_MTC0(p, 0, C0_ENTRYLO0);
-		UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-		UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL));
-	} else {
-		UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
-		if (r4k_250MHZhwbug())
-			UASM_i_MTC0(p, 0, C0_ENTRYLO0);
-		UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
-		UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
-		if (r45k_bvahwbug())
-			uasm_i_mfc0(p, tmp, C0_INDEX);
-	}
+	build_convert_pte_to_entrylo(p, tmp);
+	if (r4k_250MHZhwbug())
+		UASM_i_MTC0(p, 0, C0_ENTRYLO0);
+	UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
+	build_convert_pte_to_entrylo(p, ptep);
+	if (r45k_bvahwbug())
+		uasm_i_mfc0(p, tmp, C0_INDEX);
 	if (r4k_250MHZhwbug())
 		UASM_i_MTC0(p, 0, C0_ENTRYLO1);
 	UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
-#endif
 }
 
 struct mips_huge_tlb_info {
@@ -2299,6 +2283,10 @@ static void config_htw_params(void)
 	/* re-initialize the PTI field including the even/odd bit */
 	pwfield &= ~MIPS_PWFIELD_PTI_MASK;
 	pwfield |= PAGE_SHIFT << MIPS_PWFIELD_PTI_SHIFT;
+	if (CONFIG_PGTABLE_LEVELS >= 3) {
+		pwfield &= ~MIPS_PWFIELD_MDI_MASK;
+		pwfield |= PMD_SHIFT << MIPS_PWFIELD_MDI_SHIFT;
+	}
 	/* Set the PTEI right shift */
 	ptei = _PAGE_GLOBAL_SHIFT << MIPS_PWFIELD_PTEI_SHIFT;
 	pwfield |= ptei;
@@ -2320,9 +2308,11 @@ static void config_htw_params(void)
 
 	pwsize = ilog2(PTRS_PER_PGD) << MIPS_PWSIZE_GDW_SHIFT;
 	pwsize |= ilog2(PTRS_PER_PTE) << MIPS_PWSIZE_PTW_SHIFT;
+	if (CONFIG_PGTABLE_LEVELS >= 3)
+		pwsize |= ilog2(PTRS_PER_PMD) << MIPS_PWSIZE_MDW_SHIFT;
 
 	/* If XPA has been enabled, PTEs are 64-bit in size. */
-	if (read_c0_pagegrain() & PG_ELPA)
+	if (config_enabled(CONFIG_64BITS) || (read_c0_pagegrain() & PG_ELPA))
 		pwsize |= 1;
 
 	write_c0_pwsize(pwsize);
@@ -2360,6 +2350,41 @@ static void config_xpa_params(void)
 #endif
 }
 
+static void check_pabits(void)
+{
+	unsigned long entry;
+	unsigned pabits, fillbits;
+
+	if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
+		/*
+		 * We'll only be making use of the fact that we can rotate bits
+		 * into the fill if the CPU supports RIXI, so don't bother
+		 * probing this for CPUs which don't.
+		 */
+		return;
+	}
+
+	write_c0_entrylo0(~0ul);
+	back_to_back_c0_hazard();
+	entry = read_c0_entrylo0();
+
+	/* clear all non-PFN bits */
+	entry &= ~((1 << MIPS_ENTRYLO_PFN_SHIFT) - 1);
+	entry &= ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
+
+	/* find a lower bound on PABITS, and upper bound on fill bits */
+	pabits = fls_long(entry) + 6;
+	fillbits = max_t(int, (int)BITS_PER_LONG - pabits, 0);
+
+	/* minus the RI & XI bits */
+	fillbits -= min_t(unsigned, fillbits, 2);
+
+	if (fillbits >= ilog2(_PAGE_NO_EXEC))
+		fill_includes_sw_bits = true;
+
+	pr_debug("Entry* registers contain %u fill bits\n", fillbits);
+}
+
 void build_tlb_refill_handler(void)
 {
 	/*
@@ -2370,6 +2395,7 @@ void build_tlb_refill_handler(void)
 	static int run_once = 0;
 
 	output_pgtable_bits_defines();
+	check_pabits();
 
 #ifdef CONFIG_64BIT
 	check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index ea35587a5c29..5827af77c18e 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -5,9 +5,18 @@
 # Copyright (C) 2008 Wind River Systems, Inc.
 #   written by Ralf Baechle <ralf@linux-mips.org>
 #
-obj-y				:= malta-display.o malta-dt.o malta-init.o \
-				   malta-int.o malta-memory.o malta-platform.o \
-				   malta-reset.o malta-setup.o malta-time.o
+obj-y				+= malta-display.o
+obj-y				+= malta-dt.o
+obj-y				+= malta-dtshim.o
+obj-y				+= malta-init.o
+obj-y				+= malta-int.o
+obj-y				+= malta-memory.o
+obj-y				+= malta-platform.o
+obj-y				+= malta-reset.o
+obj-y				+= malta-setup.o
+obj-y				+= malta-time.o
 
 obj-$(CONFIG_MIPS_CMP)		+= malta-amon.o
 obj-$(CONFIG_MIPS_MALTA_PM)	+= malta-pm.o
+
+CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt
diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c
new file mode 100644
index 000000000000..f7133efc5843
--- /dev/null
+++ b/arch/mips/mti-malta/malta-dtshim.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/of_fdt.h>
+#include <linux/sizes.h>
+#include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
+#include <asm/page.h>
+
+static unsigned char fdt_buf[16 << 10] __initdata;
+
+/* determined physical memory size, not overridden by command line args	 */
+extern unsigned long physical_memsize;
+
+#define MAX_MEM_ARRAY_ENTRIES 1
+
+static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size)
+{
+	unsigned long size_preio;
+	unsigned entries;
+
+	entries = 1;
+	mem_array[0] = cpu_to_be32(PHYS_OFFSET);
+	if (config_enabled(CONFIG_EVA)) {
+		/*
+		 * The current Malta EVA configuration is "special" in that it
+		 * always makes use of addresses in the upper half of the 32 bit
+		 * physical address map, which gives it a contiguous region of
+		 * DDR but limits it to 2GB.
+		 */
+		mem_array[1] = cpu_to_be32(size);
+	} else {
+		size_preio = min_t(unsigned long, size, SZ_256M);
+		mem_array[1] = cpu_to_be32(size_preio);
+	}
+
+	BUG_ON(entries > MAX_MEM_ARRAY_ENTRIES);
+	return entries;
+}
+
+static void __init append_memory(void *fdt, int root_off)
+{
+	__be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
+	unsigned long memsize;
+	unsigned mem_entries;
+	int i, err, mem_off;
+	char *var, param_name[10], *var_names[] = {
+		"ememsize", "memsize",
+	};
+
+	/* if a memory node already exists, leave it alone */
+	mem_off = fdt_path_offset(fdt, "/memory");
+	if (mem_off >= 0)
+		return;
+
+	/* find memory size from the bootloader environment */
+	for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+		var = fw_getenv(var_names[i]);
+		if (!var)
+			continue;
+
+		err = kstrtoul(var, 0, &physical_memsize);
+		if (!err)
+			break;
+
+		pr_warn("Failed to read the '%s' env variable '%s'\n",
+			var_names[i], var);
+	}
+
+	if (!physical_memsize) {
+		pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+		physical_memsize = 32 << 20;
+	}
+
+	if (config_enabled(CONFIG_CPU_BIG_ENDIAN)) {
+		/*
+		 * SOC-it swaps, or perhaps doesn't swap, when DMA'ing
+		 * the last word of physical memory.
+		 */
+		physical_memsize -= PAGE_SIZE;
+	}
+
+	/* default to using all available RAM */
+	memsize = physical_memsize;
+
+	/* allow the user to override the usable memory */
+	for (i = 0; i < ARRAY_SIZE(var_names); i++) {
+		snprintf(param_name, sizeof(param_name), "%s=", var_names[i]);
+		var = strstr(arcs_cmdline, param_name);
+		if (!var)
+			continue;
+
+		memsize = memparse(var + strlen(param_name), NULL);
+	}
+
+	/* if the user says there's more RAM than we thought, believe them */
+	physical_memsize = max_t(unsigned long, physical_memsize, memsize);
+
+	/* append memory to the DT */
+	mem_off = fdt_add_subnode(fdt, root_off, "memory");
+	if (mem_off < 0)
+		panic("Unable to add memory node to DT: %d", mem_off);
+
+	err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+	if (err)
+		panic("Unable to set memory node device_type: %d", err);
+
+	mem_entries = gen_fdt_mem_array(mem_array, physical_memsize);
+	err = fdt_setprop(fdt, mem_off, "reg", mem_array,
+			  mem_entries * 2 * sizeof(mem_array[0]));
+	if (err)
+		panic("Unable to set memory regs property: %d", err);
+
+	mem_entries = gen_fdt_mem_array(mem_array, memsize);
+	err = fdt_setprop(fdt, mem_off, "linux,usable-memory", mem_array,
+			  mem_entries * 2 * sizeof(mem_array[0]));
+	if (err)
+		panic("Unable to set linux,usable-memory property: %d", err);
+}
+
+void __init *malta_dt_shim(void *fdt)
+{
+	int root_off, len, err;
+	const char *compat;
+
+	if (fdt_check_header(fdt))
+		panic("Corrupt DT");
+
+	err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+	if (err)
+		panic("Unable to open FDT: %d", err);
+
+	root_off = fdt_path_offset(fdt_buf, "/");
+	if (root_off < 0)
+		panic("No / node in DT");
+
+	compat = fdt_getprop(fdt_buf, root_off, "compatible", &len);
+	if (!compat)
+		panic("No root compatible property in DT: %d", len);
+
+	/* if this isn't Malta, leave the DT alone */
+	if (strncmp(compat, "mti,malta", len))
+		return fdt;
+
+	append_memory(fdt_buf, root_off);
+
+	err = fdt_pack(fdt_buf);
+	if (err)
+		panic("Unable to pack FDT: %d\n", err);
+
+	return fdt_buf;
+}
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index 53c24784a2f7..dc2c5214809d 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -293,7 +293,6 @@ mips_pci_controller:
 	console_config();
 #endif
 	/* Early detection of CMP support */
-	mips_cm_probe();
 	mips_cpc_probe();
 
 	if (!register_cps_smp_ops())
@@ -302,11 +301,5 @@ mips_pci_controller:
 		return;
 	if (!register_vsmp_smp_ops())
 		return;
-}
-
-void platform_early_l2_init(void)
-{
-	/* L2 configuration lives in the CM3 */
-	if (mips_cm_revision() >= CM_REV_CM3)
-		mips_cm_probe();
+	register_up_smp_ops();
 }
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index dadeb8379182..d5f8dae6a797 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -21,147 +21,20 @@
 #include <asm/sections.h>
 #include <asm/fw/fw.h>
 
-static fw_memblock_t mdesc[FW_MAX_MEMBLOCKS];
-
 /* determined physical memory size, not overridden by command line args	 */
 unsigned long physical_memsize = 0L;
 
-fw_memblock_t * __init fw_getmdesc(int eva)
-{
-	char *memsize_str, *ememsize_str = NULL, *ptr;
-	unsigned long memsize = 0, ememsize = 0;
-	static char cmdline[COMMAND_LINE_SIZE] __initdata;
-	int tmp;
-
-	/* otherwise look in the environment */
-
-	memsize_str = fw_getenv("memsize");
-	if (memsize_str) {
-		tmp = kstrtoul(memsize_str, 0, &memsize);
-		if (tmp)
-			pr_warn("Failed to read the 'memsize' env variable.\n");
-	}
-	if (eva) {
-	/* Look for ememsize for EVA */
-		ememsize_str = fw_getenv("ememsize");
-		if (ememsize_str) {
-			tmp = kstrtoul(ememsize_str, 0, &ememsize);
-			if (tmp)
-				pr_warn("Failed to read the 'ememsize' env variable.\n");
-		}
-	}
-	if (!memsize && !ememsize) {
-		pr_warn("memsize not set in YAMON, set to default (32Mb)\n");
-		physical_memsize = 0x02000000;
-	} else {
-		if (memsize > (256 << 20)) { /* memsize should be capped to 256M */
-			pr_warn("Unsupported memsize value (0x%lx) detected! "
-				"Using 0x10000000 (256M) instead\n",
-				memsize);
-			memsize = 256 << 20;
-		}
-		/* If ememsize is set, then set physical_memsize to that */
-		physical_memsize = ememsize ? : memsize;
-	}
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	/* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
-	   word of physical memory */
-	physical_memsize -= PAGE_SIZE;
-#endif
-
-	/* Check the command line for a memsize directive that overrides
-	   the physical/default amount */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-		ptr = strstr(ptr, " memsize=");
-	/* And now look for ememsize */
-	if (eva) {
-		ptr = strstr(cmdline, "ememsize=");
-		if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-			ptr = strstr(ptr, " ememsize=");
-	}
-
-	if (ptr)
-		memsize = memparse(ptr + 8 + (eva ? 1 : 0), &ptr);
-	else
-		memsize = physical_memsize;
-
-	/* Last 64K for HIGHMEM arithmetics */
-	if (memsize > 0x7fff0000)
-		memsize = 0x7fff0000;
-
-	memset(mdesc, 0, sizeof(mdesc));
-
-	mdesc[0].type = fw_dontuse;
-	mdesc[0].base = PHYS_OFFSET;
-	mdesc[0].size = 0x00001000;
-
-	mdesc[1].type = fw_code;
-	mdesc[1].base = mdesc[0].base + 0x00001000UL;
-	mdesc[1].size = 0x000ef000;
-
-	/*
-	 * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
-	 * south bridge and PCI access always forwarded to the ISA Bus and
-	 * BIOSCS# is always generated.
-	 * This mean that this area can't be used as DMA memory for PCI
-	 * devices.
-	 */
-	mdesc[2].type = fw_dontuse;
-	mdesc[2].base = mdesc[0].base + 0x000f0000UL;
-	mdesc[2].size = 0x00010000;
-
-	mdesc[3].type = fw_dontuse;
-	mdesc[3].base = mdesc[0].base + 0x00100000UL;
-	mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) -
-		0x00100000UL;
-
-	mdesc[4].type = fw_free;
-	mdesc[4].base = mdesc[0].base + CPHYSADDR(PFN_ALIGN(&_end));
-	mdesc[4].size = memsize - CPHYSADDR(mdesc[4].base);
-
-	return &mdesc[0];
-}
-
 static void free_init_pages_eva_malta(void *begin, void *end)
 {
 	free_init_pages("unused kernel", __pa_symbol((unsigned long *)begin),
 			__pa_symbol((unsigned long *)end));
 }
 
-static int __init fw_memtype_classify(unsigned int type)
-{
-	switch (type) {
-	case fw_free:
-		return BOOT_MEM_RAM;
-	case fw_code:
-		return BOOT_MEM_ROM_DATA;
-	default:
-		return BOOT_MEM_RESERVED;
-	}
-}
-
 void __init fw_meminit(void)
 {
-	fw_memblock_t *p;
-
-	p = fw_getmdesc(config_enabled(CONFIG_EVA));
-	free_init_pages_eva = (config_enabled(CONFIG_EVA) ?
-			       free_init_pages_eva_malta : NULL);
+	bool eva = config_enabled(CONFIG_EVA);
 
-	while (p->size) {
-		long type;
-		unsigned long base, size;
-
-		type = fw_memtype_classify(p->type);
-		base = p->base;
-		size = p->size;
-
-		add_memory_region(base, size, type);
-		p++;
-	}
+	free_init_pages_eva = eva ? free_init_pages_eva_malta : NULL;
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 9d1e7f5ec36c..4740c82fb97a 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -27,6 +27,7 @@
 #include <linux/time.h>
 
 #include <asm/fw/fw.h>
+#include <asm/mach-malta/malta-dtshim.h>
 #include <asm/mips-cm.h>
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/malta.h>
@@ -250,8 +251,10 @@ static void __init bonito_quirks_setup(void)
 void __init plat_mem_setup(void)
 {
 	unsigned int i;
+	void *fdt = __dtb_start;
 
-	__dt_setup_arch(__dtb_start);
+	fdt = malta_dt_shim(fdt);
+	__dt_setup_arch(fdt);
 
 	if (config_enabled(CONFIG_EVA))
 		/* EVA has already been configured in mach-malta/kernel-init.h */
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index 77cb27309db2..1a8c96035716 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -521,19 +521,6 @@ static inline u16 align_sp(unsigned int num)
 	return num;
 }
 
-static bool is_load_to_a(u16 inst)
-{
-	switch (inst) {
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		return true;
-	default:
-		return false;
-	}
-}
-
 static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
 {
 	int i = 0, real_off = 0;
@@ -614,7 +601,6 @@ static unsigned int get_stack_depth(struct jit_ctx *ctx)
 
 static void build_prologue(struct jit_ctx *ctx)
 {
-	u16 first_inst = ctx->skf->insns[0].code;
 	int sp_off;
 
 	/* Calculate the total offset for the stack pointer */
@@ -641,7 +627,7 @@ static void build_prologue(struct jit_ctx *ctx)
 		emit_jit_reg_move(r_X, r_zero, ctx);
 
 	/* Do not leak kernel data to userspace */
-	if ((first_inst != (BPF_RET | BPF_K)) && !(is_load_to_a(first_inst)))
+	if (bpf_needs_clear_a(&ctx->skf->insns[0]))
 		emit_jit_reg_move(r_A, r_zero, ctx);
 }
 
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index a625bdb6d6aa..856a6e6d296e 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -87,7 +87,6 @@ void __init *xlp_dt_init(void *fdtp)
 void __init xlp_early_init_devtree(void)
 {
 	__dt_setup_arch(xlp_fdt_blob);
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 }
 
 void __init device_tree_init(void)
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 2eda01e6e08f..139ad1d7ab5e 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_LANTIQ)		+= fixup-lantiq.o
 obj-$(CONFIG_PCI_LANTIQ)	+= pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_MT7620)	+= pci-mt7620.o
 obj-$(CONFIG_SOC_RT288X)	+= pci-rt2880.o
 obj-$(CONFIG_SOC_RT3883)	+= pci-rt3883.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
diff --git a/arch/mips/pci/fixup-loongson3.c b/arch/mips/pci/fixup-loongson3.c
index d708ae46d325..2b6d5e196f99 100644
--- a/arch/mips/pci/fixup-loongson3.c
+++ b/arch/mips/pci/fixup-loongson3.c
@@ -40,20 +40,25 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 
 static void pci_fixup_radeon(struct pci_dev *pdev)
 {
-	if (pdev->resource[PCI_ROM_RESOURCE].start)
+	struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
+
+	if (res->start)
 		return;
 
 	if (!loongson_sysconf.vgabios_addr)
 		return;
 
-	pdev->resource[PCI_ROM_RESOURCE].start =
-		loongson_sysconf.vgabios_addr;
-	pdev->resource[PCI_ROM_RESOURCE].end   =
-		loongson_sysconf.vgabios_addr + 256*1024 - 1;
-	pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_COPY;
+	pci_disable_rom(pdev);
+	if (res->parent)
+		release_resource(res);
+
+	res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr);
+	res->end   = res->start + 256*1024 - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+		     IORESOURCE_PCI_FIXED;
 
 	dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n",
-			PCI_ROM_RESOURCE, &pdev->resource[PCI_ROM_RESOURCE]);
+		 PCI_ROM_RESOURCE, res);
 }
 
 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
new file mode 100644
index 000000000000..1ae932c2d78b
--- /dev/null
+++ b/arch/mips/pci/pci-mt7620.c
@@ -0,0 +1,426 @@
+/*
+ *  Ralink MT7620A SoC PCI support
+ *
+ *  Copyright (C) 2007-2013 Bruce Chang (Mediatek)
+ *  Copyright (C) 2013-2016 John Crispin <blogic@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/reset.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7620.h>
+
+#define RALINK_PCI_IO_MAP_BASE		0x10160000
+#define RALINK_PCI_MEMORY_BASE		0x0
+
+#define RALINK_INT_PCIE0		4
+
+#define RALINK_CLKCFG1			0x30
+#define RALINK_GPIOMODE			0x60
+
+#define PPLL_CFG1			0x9c
+#define PDRV_SW_SET			BIT(23)
+
+#define PPLL_DRV			0xa0
+#define PDRV_SW_SET			(1<<31)
+#define LC_CKDRVPD			(1<<19)
+#define LC_CKDRVOHZ			(1<<18)
+#define LC_CKDRVHZ			(1<<17)
+#define LC_CKTEST			(1<<16)
+
+/* PCI Bridge registers */
+#define RALINK_PCI_PCICFG_ADDR		0x00
+#define PCIRST				BIT(1)
+
+#define RALINK_PCI_PCIENA		0x0C
+#define PCIINT2				BIT(20)
+
+#define RALINK_PCI_CONFIG_ADDR		0x20
+#define RALINK_PCI_CONFIG_DATA_VIRT_REG	0x24
+#define RALINK_PCI_MEMBASE		0x28
+#define RALINK_PCI_IOBASE		0x2C
+
+/* PCI RC registers */
+#define RALINK_PCI0_BAR0SETUP_ADDR	0x10
+#define RALINK_PCI0_IMBASEBAR0_ADDR	0x18
+#define RALINK_PCI0_ID			0x30
+#define RALINK_PCI0_CLASS		0x34
+#define RALINK_PCI0_SUBID		0x38
+#define RALINK_PCI0_STATUS		0x50
+#define PCIE_LINK_UP_ST			BIT(0)
+
+#define PCIEPHY0_CFG			0x90
+
+#define RALINK_PCIEPHY_P0_CTL_OFFSET	0x7498
+#define RALINK_PCIE0_CLK_EN		(1 << 26)
+
+#define BUSY				0x80000000
+#define WAITRETRY_MAX			10
+#define WRITE_MODE			(1UL << 23)
+#define DATA_SHIFT			0
+#define ADDR_SHIFT			8
+
+
+static void __iomem *bridge_base;
+static void __iomem *pcie_base;
+
+static struct reset_control *rstpcie0;
+
+static inline void bridge_w32(u32 val, unsigned reg)
+{
+	iowrite32(val, bridge_base + reg);
+}
+
+static inline u32 bridge_r32(unsigned reg)
+{
+	return ioread32(bridge_base + reg);
+}
+
+static inline void pcie_w32(u32 val, unsigned reg)
+{
+	iowrite32(val, pcie_base + reg);
+}
+
+static inline u32 pcie_r32(unsigned reg)
+{
+	return ioread32(pcie_base + reg);
+}
+
+static inline void pcie_m32(u32 clr, u32 set, unsigned reg)
+{
+	u32 val = pcie_r32(reg);
+
+	val &= ~clr;
+	val |= set;
+	pcie_w32(val, reg);
+}
+
+static int wait_pciephy_busy(void)
+{
+	unsigned long reg_value = 0x0, retry = 0;
+
+	while (1) {
+		reg_value = pcie_r32(PCIEPHY0_CFG);
+
+		if (reg_value & BUSY)
+			mdelay(100);
+		else
+			break;
+		if (retry++ > WAITRETRY_MAX) {
+			printk(KERN_WARN "PCIE-PHY retry failed.\n");
+			return -1;
+		}
+	}
+	return 0;
+}
+
+static void pcie_phy(unsigned long addr, unsigned long val)
+{
+	wait_pciephy_busy();
+	pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT),
+		 PCIEPHY0_CFG);
+	mdelay(1);
+	wait_pciephy_busy();
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
+			   int size, u32 *val)
+{
+	unsigned int slot = PCI_SLOT(devfn);
+	u8 func = PCI_FUNC(devfn);
+	u32 address;
+	u32 data;
+	u32 num = 0;
+
+	if (bus)
+		num = bus->number;
+
+	address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
+		  (func << 8) | (where & 0xfc) | 0x80000000;
+	bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
+	data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
+
+	switch (size) {
+	case 1:
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+		break;
+	case 2:
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+		break;
+	case 4:
+		*val = data;
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
+			    int size, u32 val)
+{
+	unsigned int slot = PCI_SLOT(devfn);
+	u8 func = PCI_FUNC(devfn);
+	u32 address;
+	u32 data;
+	u32 num = 0;
+
+	if (bus)
+		num = bus->number;
+
+	address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) |
+		  (func << 8) | (where & 0xfc) | 0x80000000;
+	bridge_w32(address, RALINK_PCI_CONFIG_ADDR);
+	data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG);
+
+	switch (size) {
+	case 1:
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 2:
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+			(val << ((where & 3) << 3));
+		break;
+	case 4:
+		data = val;
+		break;
+	}
+
+	bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops mt7620_pci_ops = {
+	.read	= pci_config_read,
+	.write	= pci_config_write,
+};
+
+static struct resource mt7620_res_pci_mem1;
+static struct resource mt7620_res_pci_io1;
+struct pci_controller mt7620_controller = {
+	.pci_ops	= &mt7620_pci_ops,
+	.mem_resource	= &mt7620_res_pci_mem1,
+	.mem_offset	= 0x00000000UL,
+	.io_resource	= &mt7620_res_pci_io1,
+	.io_offset	= 0x00000000UL,
+	.io_map_base	= 0xa0000000,
+};
+
+static int mt7620_pci_hw_init(struct platform_device *pdev)
+{
+	/* bypass PCIe DLL */
+	pcie_phy(0x0, 0x80);
+	pcie_phy(0x1, 0x04);
+
+	/* Elastic buffer control */
+	pcie_phy(0x68, 0xB4);
+
+	/* put core into reset */
+	pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR);
+	reset_control_assert(rstpcie0);
+
+	/* disable power and all clocks */
+	rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+	rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
+
+	/* bring core out of reset */
+	reset_control_deassert(rstpcie0);
+	rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
+	mdelay(100);
+
+	if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) {
+		dev_err(&pdev->dev, "MT7620 PPLL unlock\n");
+		reset_control_assert(rstpcie0);
+		rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+		return -1;
+	}
+
+	/* power up the bus */
+	rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET,
+		    PPLL_DRV);
+
+	return 0;
+}
+
+static int mt7628_pci_hw_init(struct platform_device *pdev)
+{
+	u32 val = 0;
+
+	/* bring the core out of reset */
+	rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE);
+	reset_control_deassert(rstpcie0);
+
+	/* enable the pci clk */
+	rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1);
+	mdelay(100);
+
+	/* voodoo from the SDK driver */
+	pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET);
+
+	pci_config_read(NULL, 0, 0x70c, 4, &val);
+	val &= ~(0xff) << 8;
+	val |= 0x50 << 8;
+	pci_config_write(NULL, 0, 0x70c, 4, val);
+
+	pci_config_read(NULL, 0, 0x70c, 4, &val);
+	dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val);
+
+	return 0;
+}
+
+static int mt7620_pci_probe(struct platform_device *pdev)
+{
+	struct resource *bridge_res = platform_get_resource(pdev,
+							    IORESOURCE_MEM, 0);
+	struct resource *pcie_res = platform_get_resource(pdev,
+							  IORESOURCE_MEM, 1);
+	u32 val = 0;
+
+	rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0");
+	if (IS_ERR(rstpcie0))
+		return PTR_ERR(rstpcie0);
+
+	bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res);
+	if (IS_ERR(bridge_base))
+		return PTR_ERR(bridge_base);
+
+	pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res);
+	if (IS_ERR(pcie_base))
+		return PTR_ERR(pcie_base);
+
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0;
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0;
+
+	/* bring up the pci core */
+	switch (ralink_soc) {
+	case MT762X_SOC_MT7620A:
+		if (mt7620_pci_hw_init(pdev))
+			return -1;
+		break;
+
+	case MT762X_SOC_MT7628AN:
+		if (mt7628_pci_hw_init(pdev))
+			return -1;
+		break;
+
+	default:
+		dev_err(&pdev->dev, "pcie is not supported on this hardware\n");
+		return -1;
+	}
+	mdelay(50);
+
+	/* enable write access */
+	pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR);
+	mdelay(100);
+
+	/* check if there is a card present */
+	if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) {
+		reset_control_assert(rstpcie0);
+		rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
+		if (ralink_soc == MT762X_SOC_MT7620A)
+			rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
+		dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
+		return -1;
+	}
+
+	/* setup ranges */
+	bridge_w32(0xffffffff, RALINK_PCI_MEMBASE);
+	bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE);
+
+	pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
+	pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR);
+	pcie_w32(0x06040001, RALINK_PCI0_CLASS);
+
+	/* enable interrupts */
+	pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA);
+
+	/* voodoo from the SDK driver */
+	pci_config_read(NULL, 0, 4, 4, &val);
+	pci_config_write(NULL, 0, 4, 4, val | 0x7);
+
+	pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node);
+	register_pci_controller(&mt7620_controller);
+
+	return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	u16 cmd;
+	u32 val;
+	int irq = 0;
+
+	if ((dev->bus->number == 0) && (slot == 0)) {
+		pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR);
+		pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4,
+				 RALINK_PCI_MEMORY_BASE);
+		pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val);
+	} else if ((dev->bus->number == 1) && (slot == 0x0)) {
+		irq = RALINK_INT_PCIE0;
+	} else {
+		dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n",
+			dev->bus->number, slot);
+		return 0;
+	}
+	dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
+		dev->bus->number, slot, irq);
+
+	/* configure the cache line size to 0x14 */
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14);
+
+	/* configure latency timer to 0xff */
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff);
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+
+	/* setup the slot */
+	cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
+	pci_write_config_word(dev, PCI_COMMAND, cmd);
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+	return irq;
+}
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+static const struct of_device_id mt7620_pci_ids[] = {
+	{ .compatible = "mediatek,mt7620-pci" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt7620_pci_ids);
+
+static struct platform_driver mt7620_pci_driver = {
+	.probe = mt7620_pci_probe,
+	.driver = {
+		.name = "mt7620-pci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(mt7620_pci_ids),
+	},
+};
+
+static int __init mt7620_pci_init(void)
+{
+	return platform_driver_register(&mt7620_pci_driver);
+}
+
+arch_initcall(mt7620_pci_init);
diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
index 8a978022630b..a245cad4372a 100644
--- a/arch/mips/pci/pci-rt2880.c
+++ b/arch/mips/pci/pci-rt2880.c
@@ -11,6 +11,7 @@
  *  by the Free Software Foundation.
  */
 
+#include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/io.h>
@@ -220,7 +221,6 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 static int rt288x_pci_probe(struct platform_device *pdev)
 {
 	void __iomem *io_map_base;
-	int i;
 
 	rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
 
@@ -232,8 +232,7 @@ static int rt288x_pci_probe(struct platform_device *pdev)
 	ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
 
 	rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
-	for (i = 0; i < 0xfffff; i++)
-		;
+	udelay(1);
 
 	rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
 	rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
diff --git a/arch/mips/pci/pci-rt3883.c b/arch/mips/pci/pci-rt3883.c
index ed6732f9aa87..53a42b07008b 100644
--- a/arch/mips/pci/pci-rt3883.c
+++ b/arch/mips/pci/pci-rt3883.c
@@ -432,8 +432,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 
 	/* find the interrupt controller child node */
 	for_each_child_of_node(np, child) {
-		if (of_get_property(child, "interrupt-controller", NULL) &&
-		    of_node_get(child)) {
+		if (of_get_property(child, "interrupt-controller", NULL)) {
 			rpc->intc_of_node = child;
 			break;
 		}
@@ -449,8 +448,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 	/* find the PCI host bridge child node */
 	for_each_child_of_node(np, child) {
 		if (child->type &&
-		    of_node_cmp(child->type, "pci") == 0 &&
-		    of_node_get(child)) {
+		    of_node_cmp(child->type, "pci") == 0) {
 			rpc->pci_controller.of_node = child;
 			break;
 		}
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
new file mode 100644
index 000000000000..1985971b9890
--- /dev/null
+++ b/arch/mips/pic32/Kconfig
@@ -0,0 +1,50 @@
+if MACH_PIC32
+
+choice
+	prompt "Machine Type"
+
+config PIC32MZDA
+	bool "Microchip PIC32MZDA Platform"
+	select BOOT_ELF32
+	select BOOT_RAW
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLK
+	select CLKDEV_LOOKUP
+	select LIBFDT
+	select USE_OF
+	select PINCTRL
+	select PIC32_EVIC
+	help
+	  Support for the Microchip PIC32MZDA microcontroller.
+
+	  This is a 32-bit microcontroller with support for external or
+	  internally packaged DDR2 memory up to 128MB.
+
+	  For more information, see <http://www.microchip.com/>.
+
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	default DTB_PIC32_NONE
+	help
+	  Select the devicetree.
+
+config DTB_PIC32_NONE
+       bool "None"
+
+config DTB_PIC32_MZDA_SK
+       bool "PIC32MZDA Starter Kit"
+       depends on PIC32MZDA
+       select BUILTIN_DTB
+
+endchoice
+
+endif # MACH_PIC32
diff --git a/arch/mips/pic32/Makefile b/arch/mips/pic32/Makefile
new file mode 100644
index 000000000000..fd357f49ac6c
--- /dev/null
+++ b/arch/mips/pic32/Makefile
@@ -0,0 +1,6 @@
+#
+# Joshua Henderson, <joshua.henderson@microchip.com>
+# Copyright (C) 2015 Microchip Technology, Inc.  All rights reserved.
+#
+obj-$(CONFIG_MACH_PIC32) += common/
+obj-$(CONFIG_PIC32MZDA) += pic32mzda/
diff --git a/arch/mips/pic32/Platform b/arch/mips/pic32/Platform
new file mode 100644
index 000000000000..cd2084f44507
--- /dev/null
+++ b/arch/mips/pic32/Platform
@@ -0,0 +1,7 @@
+#
+# PIC32MZDA
+#
+platform-$(CONFIG_PIC32MZDA)	+= pic32/
+cflags-$(CONFIG_PIC32MZDA)	+= -I$(srctree)/arch/mips/include/asm/mach-pic32
+load-$(CONFIG_PIC32MZDA)	+= 0xffffffff88000000
+all-$(CONFIG_PIC32MZDA)		:= $(COMPRESSION_FNAME).bin
diff --git a/arch/mips/pic32/common/Makefile b/arch/mips/pic32/common/Makefile
new file mode 100644
index 000000000000..be1909cc0467
--- /dev/null
+++ b/arch/mips/pic32/common/Makefile
@@ -0,0 +1,5 @@
+#
+# Joshua Henderson, <joshua.henderson@microchip.com>
+# Copyright (C) 2015 Microchip Technology, Inc.  All rights reserved.
+#
+obj-y = reset.o irq.o
diff --git a/arch/mips/pic32/common/irq.c b/arch/mips/pic32/common/irq.c
new file mode 100644
index 000000000000..6df347e36036
--- /dev/null
+++ b/arch/mips/pic32/common/irq.c
@@ -0,0 +1,21 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <linux/init.h>
+#include <linux/irqchip.h>
+#include <asm/irq.h>
+
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
diff --git a/arch/mips/pic32/common/reset.c b/arch/mips/pic32/common/reset.c
new file mode 100644
index 000000000000..83345757be5f
--- /dev/null
+++ b/arch/mips/pic32/common/reset.c
@@ -0,0 +1,62 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+#include <asm/mach-pic32/pic32.h>
+
+#define PIC32_RSWRST		0x10
+
+static void pic32_halt(void)
+{
+	while (1) {
+		__asm__(".set push;\n"
+			".set arch=r4000;\n"
+			"wait;\n"
+			".set pop;\n"
+		);
+	}
+}
+
+static void pic32_machine_restart(char *command)
+{
+	void __iomem *reg =
+		ioremap(PIC32_BASE_RESET + PIC32_RSWRST, sizeof(u32));
+
+	pic32_syskey_unlock();
+
+	/* magic write/read */
+	__raw_writel(1, reg);
+	(void)__raw_readl(reg);
+
+	pic32_halt();
+}
+
+static void pic32_machine_halt(void)
+{
+	local_irq_disable();
+
+	pic32_halt();
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = pic32_machine_restart;
+	_machine_halt = pic32_machine_halt;
+	pm_power_off = pic32_machine_halt;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/pic32/pic32mzda/Makefile b/arch/mips/pic32/pic32mzda/Makefile
new file mode 100644
index 000000000000..4a4c2728c027
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/Makefile
@@ -0,0 +1,9 @@
+#
+# Joshua Henderson, <joshua.henderson@microchip.com>
+# Copyright (C) 2015 Microchip Technology, Inc.  All rights reserved.
+#
+obj-y			:= init.o time.o config.o
+
+obj-$(CONFIG_EARLY_PRINTK)	+= early_console.o      \
+				   early_pin.o		\
+				   early_clk.o
diff --git a/arch/mips/pic32/pic32mzda/config.c b/arch/mips/pic32/pic32mzda/config.c
new file mode 100644
index 000000000000..fe293a070003
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/config.c
@@ -0,0 +1,126 @@
+/*
+ * Purna Chandra Mandal, purna.mandal@microchip.com
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach-pic32/pic32.h>
+
+#include "pic32mzda.h"
+
+#define PIC32_CFGCON	0x0000
+#define PIC32_DEVID	0x0020
+#define PIC32_SYSKEY	0x0030
+#define PIC32_CFGEBIA	0x00c0
+#define PIC32_CFGEBIC	0x00d0
+#define PIC32_CFGCON2	0x00f0
+#define PIC32_RCON	0x1240
+
+static void __iomem *pic32_conf_base;
+static DEFINE_SPINLOCK(config_lock);
+static u32 pic32_reset_status;
+
+static u32 pic32_conf_get_reg_field(u32 offset, u32 rshift, u32 mask)
+{
+	u32 v;
+
+	v = readl(pic32_conf_base + offset);
+	v >>= rshift;
+	v &= mask;
+
+	return v;
+}
+
+static u32 pic32_conf_modify_atomic(u32 offset, u32 mask, u32 set)
+{
+	u32 v;
+	unsigned long flags;
+
+	spin_lock_irqsave(&config_lock, flags);
+	v = readl(pic32_conf_base + offset);
+	v &= ~mask;
+	v |= (set & mask);
+	writel(v, pic32_conf_base + offset);
+	spin_unlock_irqrestore(&config_lock, flags);
+
+	return 0;
+}
+
+int pic32_enable_lcd(void)
+{
+	return pic32_conf_modify_atomic(PIC32_CFGCON2, BIT(31), BIT(31));
+}
+
+int pic32_disable_lcd(void)
+{
+	return pic32_conf_modify_atomic(PIC32_CFGCON2, BIT(31), 0);
+}
+
+int pic32_set_lcd_mode(int mode)
+{
+	u32 mask = mode ? BIT(30) : 0;
+
+	return pic32_conf_modify_atomic(PIC32_CFGCON2, BIT(30), mask);
+}
+
+int pic32_set_sdhci_adma_fifo_threshold(u32 rthrsh, u32 wthrsh)
+{
+	u32 clr, set;
+
+	clr = (0x3ff << 4) | (0x3ff << 16);
+	set = (rthrsh << 4) | (wthrsh << 16);
+	return pic32_conf_modify_atomic(PIC32_CFGCON2, clr, set);
+}
+
+void pic32_syskey_unlock_debug(const char *func, const ulong line)
+{
+	void __iomem *syskey = pic32_conf_base + PIC32_SYSKEY;
+
+	pr_debug("%s: called from %s:%lu\n", __func__, func, line);
+	writel(0x00000000, syskey);
+	writel(0xAA996655, syskey);
+	writel(0x556699AA, syskey);
+}
+
+static u32 pic32_get_device_id(void)
+{
+	return pic32_conf_get_reg_field(PIC32_DEVID, 0, 0x0fffffff);
+}
+
+static u32 pic32_get_device_version(void)
+{
+	return pic32_conf_get_reg_field(PIC32_DEVID, 28, 0xf);
+}
+
+u32 pic32_get_boot_status(void)
+{
+	return pic32_reset_status;
+}
+EXPORT_SYMBOL(pic32_get_boot_status);
+
+void __init pic32_config_init(void)
+{
+	pic32_conf_base = ioremap(PIC32_BASE_CONFIG, 0x110);
+	if (!pic32_conf_base)
+		panic("pic32: config base not mapped");
+
+	/* Boot Status */
+	pic32_reset_status = readl(pic32_conf_base + PIC32_RCON);
+	writel(-1, PIC32_CLR(pic32_conf_base + PIC32_RCON));
+
+	/* Device Inforation */
+	pr_info("Device Id: 0x%08x, Device Ver: 0x%04x\n",
+		pic32_get_device_id(),
+		pic32_get_device_version());
+}
diff --git a/arch/mips/pic32/pic32mzda/early_clk.c b/arch/mips/pic32/pic32mzda/early_clk.c
new file mode 100644
index 000000000000..96c090e9d637
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_clk.c
@@ -0,0 +1,106 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <asm/mach-pic32/pic32.h>
+
+#include "pic32mzda.h"
+
+/* Oscillators, PLL & clocks */
+#define ICLK_MASK	0x00000080
+#define PLLDIV_MASK	0x00000007
+#define CUROSC_MASK	0x00000007
+#define PLLMUL_MASK	0x0000007F
+#define PB_MASK		0x00000007
+#define FRC1		0
+#define FRC2		7
+#define SPLL		1
+#define POSC		2
+#define FRC_CLK		8000000
+
+#define PIC32_POSC_FREQ	24000000
+
+#define OSCCON		0x0000
+#define SPLLCON		0x0020
+#define PB1DIV		0x0140
+
+u32 pic32_get_sysclk(void)
+{
+	u32 osc_freq = 0;
+	u32 pllclk;
+	u32 frcdivn;
+	u32 osccon;
+	u32 spllcon;
+	int curr_osc;
+
+	u32 plliclk;
+	u32 pllidiv;
+	u32 pllodiv;
+	u32 pllmult;
+	u32 frcdiv;
+
+	void __iomem *osc_base = ioremap(PIC32_BASE_OSC, 0x200);
+
+	osccon = __raw_readl(osc_base + OSCCON);
+	spllcon = __raw_readl(osc_base + SPLLCON);
+
+	plliclk = (spllcon & ICLK_MASK);
+	pllidiv = ((spllcon >> 8) & PLLDIV_MASK) + 1;
+	pllodiv = ((spllcon >> 24) & PLLDIV_MASK);
+	pllmult = ((spllcon >> 16) & PLLMUL_MASK) + 1;
+	frcdiv = ((osccon >> 24) & PLLDIV_MASK);
+
+	pllclk = plliclk ? FRC_CLK : PIC32_POSC_FREQ;
+	frcdivn = ((1 << frcdiv) + 1) + (128 * (frcdiv == 7));
+
+	if (pllodiv < 2)
+		pllodiv = 2;
+	else if (pllodiv < 5)
+		pllodiv = (1 << pllodiv);
+	else
+		pllodiv = 32;
+
+	curr_osc = (int)((osccon >> 12) & CUROSC_MASK);
+
+	switch (curr_osc) {
+	case FRC1:
+	case FRC2:
+		osc_freq = FRC_CLK / frcdivn;
+		break;
+	case SPLL:
+		osc_freq = ((pllclk / pllidiv) * pllmult) / pllodiv;
+		break;
+	case POSC:
+		osc_freq = PIC32_POSC_FREQ;
+		break;
+	default:
+		break;
+	}
+
+	iounmap(osc_base);
+
+	return osc_freq;
+}
+
+u32 pic32_get_pbclk(int bus)
+{
+	u32 clk_freq;
+	void __iomem *osc_base = ioremap(PIC32_BASE_OSC, 0x200);
+	u32 pbxdiv = PB1DIV + ((bus - 1) * 0x10);
+	u32 pbdiv = (__raw_readl(osc_base + pbxdiv) & PB_MASK) + 1;
+
+	iounmap(osc_base);
+
+	clk_freq = pic32_get_sysclk();
+
+	return clk_freq / pbdiv;
+}
diff --git a/arch/mips/pic32/pic32mzda/early_console.c b/arch/mips/pic32/pic32mzda/early_console.c
new file mode 100644
index 000000000000..d7b783463fac
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_console.c
@@ -0,0 +1,171 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <asm/mach-pic32/pic32.h>
+#include <asm/fw/fw.h>
+
+#include "pic32mzda.h"
+#include "early_pin.h"
+
+/* Default early console parameters */
+#define EARLY_CONSOLE_PORT	1
+#define EARLY_CONSOLE_BAUDRATE	115200
+
+#define UART_ENABLE		BIT(15)
+#define UART_ENABLE_RX		BIT(12)
+#define UART_ENABLE_TX		BIT(10)
+#define UART_TX_FULL		BIT(9)
+
+/* UART1(x == 0) - UART6(x == 5) */
+#define UART_BASE(x)	((x) * 0x0200)
+#define U_MODE(x)	UART_BASE(x)
+#define U_STA(x)	(UART_BASE(x) + 0x10)
+#define U_TXR(x)	(UART_BASE(x) + 0x20)
+#define U_BRG(x)	(UART_BASE(x) + 0x40)
+
+static void __iomem *uart_base;
+static char console_port = -1;
+
+static int __init configure_uart_pins(int port)
+{
+	switch (port) {
+	case 1:
+		pic32_pps_input(IN_FUNC_U2RX, IN_RPB0);
+		pic32_pps_output(OUT_FUNC_U2TX, OUT_RPG9);
+		break;
+	case 5:
+		pic32_pps_input(IN_FUNC_U6RX, IN_RPD0);
+		pic32_pps_output(OUT_FUNC_U6TX, OUT_RPB8);
+		break;
+	default:
+		return -1;
+	}
+
+	return 0;
+}
+
+static void __init configure_uart(char port, int baud)
+{
+	u32 pbclk;
+
+	pbclk = pic32_get_pbclk(2);
+
+	__raw_writel(0, uart_base + U_MODE(port));
+	__raw_writel(((pbclk / baud) / 16) - 1, uart_base + U_BRG(port));
+	__raw_writel(UART_ENABLE, uart_base + U_MODE(port));
+	__raw_writel(UART_ENABLE_TX | UART_ENABLE_RX,
+		     uart_base + PIC32_SET(U_STA(port)));
+}
+
+static void __init setup_early_console(char port, int baud)
+{
+	if (configure_uart_pins(port))
+		return;
+
+	console_port = port;
+	configure_uart(console_port, baud);
+}
+
+static char * __init pic32_getcmdline(void)
+{
+	/*
+	 * arch_mem_init() has not been called yet, so we don't have a real
+	 * command line setup if using CONFIG_CMDLINE_BOOL.
+	 */
+#ifdef CONFIG_CMDLINE_OVERRIDE
+	return CONFIG_CMDLINE;
+#else
+	return fw_getcmdline();
+#endif
+}
+
+static int __init get_port_from_cmdline(char *arch_cmdline)
+{
+	char *s;
+	int port = -1;
+
+	if (!arch_cmdline || *arch_cmdline == '\0')
+		goto _out;
+
+	s = strstr(arch_cmdline, "earlyprintk=");
+	if (s) {
+		s = strstr(s, "ttyS");
+		if (s)
+			s += 4;
+		else
+			goto _out;
+
+		port = (*s) - '0';
+	}
+
+_out:
+	return port;
+}
+
+static int __init get_baud_from_cmdline(char *arch_cmdline)
+{
+	char *s;
+	int baud = -1;
+
+	if (!arch_cmdline || *arch_cmdline == '\0')
+		goto _out;
+
+	s = strstr(arch_cmdline, "earlyprintk=");
+	if (s) {
+		s = strstr(s, "ttyS");
+		if (s)
+			s += 6;
+		else
+			goto _out;
+
+		baud = 0;
+		while (*s >= '0' && *s <= '9')
+			baud = baud * 10 + *s++ - '0';
+	}
+
+_out:
+	return baud;
+}
+
+void __init fw_init_early_console(char port)
+{
+	char *arch_cmdline = pic32_getcmdline();
+	int baud = -1;
+
+	uart_base = ioremap_nocache(PIC32_BASE_UART, 0xc00);
+
+	baud = get_baud_from_cmdline(arch_cmdline);
+	if (port == -1)
+		port = get_port_from_cmdline(arch_cmdline);
+
+	if (port == -1)
+		port = EARLY_CONSOLE_PORT;
+
+	if (baud == -1)
+		baud = EARLY_CONSOLE_BAUDRATE;
+
+	setup_early_console(port, baud);
+}
+
+int prom_putchar(char c)
+{
+	if (console_port >= 0) {
+		while (__raw_readl(
+				uart_base + U_STA(console_port)) & UART_TX_FULL)
+			;
+
+		__raw_writel(c, uart_base + U_TXR(console_port));
+	}
+
+	return 1;
+}
diff --git a/arch/mips/pic32/pic32mzda/early_pin.c b/arch/mips/pic32/pic32mzda/early_pin.c
new file mode 100644
index 000000000000..aa673f8023a8
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_pin.c
@@ -0,0 +1,275 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <asm/io.h>
+
+#include "early_pin.h"
+
+#define PPS_BASE 0x1f800000
+
+/* Input PPS Registers */
+#define INT1R 0x1404
+#define INT2R 0x1408
+#define INT3R 0x140C
+#define INT4R 0x1410
+#define T2CKR 0x1418
+#define T3CKR 0x141C
+#define T4CKR 0x1420
+#define T5CKR 0x1424
+#define T6CKR 0x1428
+#define T7CKR 0x142C
+#define T8CKR 0x1430
+#define T9CKR 0x1434
+#define IC1R 0x1438
+#define IC2R 0x143C
+#define IC3R 0x1440
+#define IC4R 0x1444
+#define IC5R 0x1448
+#define IC6R 0x144C
+#define IC7R 0x1450
+#define IC8R 0x1454
+#define IC9R 0x1458
+#define OCFAR 0x1460
+#define U1RXR 0x1468
+#define U1CTSR 0x146C
+#define U2RXR 0x1470
+#define U2CTSR 0x1474
+#define U3RXR 0x1478
+#define U3CTSR 0x147C
+#define U4RXR 0x1480
+#define U4CTSR 0x1484
+#define U5RXR 0x1488
+#define U5CTSR 0x148C
+#define U6RXR 0x1490
+#define U6CTSR 0x1494
+#define SDI1R 0x149C
+#define SS1R 0x14A0
+#define SDI2R 0x14A8
+#define SS2R 0x14AC
+#define SDI3R 0x14B4
+#define SS3R 0x14B8
+#define SDI4R 0x14C0
+#define SS4R 0x14C4
+#define SDI5R 0x14CC
+#define SS5R 0x14D0
+#define SDI6R 0x14D8
+#define SS6R 0x14DC
+#define C1RXR 0x14E0
+#define C2RXR 0x14E4
+#define REFCLKI1R 0x14E8
+#define REFCLKI3R 0x14F0
+#define REFCLKI4R 0x14F4
+
+static const struct
+{
+	int function;
+	int reg;
+} input_pin_reg[] = {
+	{ IN_FUNC_INT3, INT3R },
+	{ IN_FUNC_T2CK, T2CKR },
+	{ IN_FUNC_T6CK, T6CKR },
+	{ IN_FUNC_IC3, IC3R  },
+	{ IN_FUNC_IC7, IC7R },
+	{ IN_FUNC_U1RX, U1RXR },
+	{ IN_FUNC_U2CTS, U2CTSR },
+	{ IN_FUNC_U5RX, U5RXR },
+	{ IN_FUNC_U6CTS, U6CTSR },
+	{ IN_FUNC_SDI1, SDI1R },
+	{ IN_FUNC_SDI3, SDI3R },
+	{ IN_FUNC_SDI5, SDI5R },
+	{ IN_FUNC_SS6, SS6R },
+	{ IN_FUNC_REFCLKI1, REFCLKI1R },
+	{ IN_FUNC_INT4, INT4R },
+	{ IN_FUNC_T5CK, T5CKR },
+	{ IN_FUNC_T7CK, T7CKR },
+	{ IN_FUNC_IC4, IC4R },
+	{ IN_FUNC_IC8, IC8R },
+	{ IN_FUNC_U3RX, U3RXR },
+	{ IN_FUNC_U4CTS, U4CTSR },
+	{ IN_FUNC_SDI2, SDI2R },
+	{ IN_FUNC_SDI4, SDI4R },
+	{ IN_FUNC_C1RX, C1RXR },
+	{ IN_FUNC_REFCLKI4, REFCLKI4R },
+	{ IN_FUNC_INT2, INT2R },
+	{ IN_FUNC_T3CK, T3CKR },
+	{ IN_FUNC_T8CK, T8CKR },
+	{ IN_FUNC_IC2, IC2R },
+	{ IN_FUNC_IC5, IC5R },
+	{ IN_FUNC_IC9, IC9R },
+	{ IN_FUNC_U1CTS, U1CTSR },
+	{ IN_FUNC_U2RX, U2RXR },
+	{ IN_FUNC_U5CTS, U5CTSR },
+	{ IN_FUNC_SS1, SS1R },
+	{ IN_FUNC_SS3, SS3R },
+	{ IN_FUNC_SS4, SS4R },
+	{ IN_FUNC_SS5, SS5R },
+	{ IN_FUNC_C2RX, C2RXR },
+	{ IN_FUNC_INT1, INT1R },
+	{ IN_FUNC_T4CK, T4CKR },
+	{ IN_FUNC_T9CK, T9CKR },
+	{ IN_FUNC_IC1, IC1R },
+	{ IN_FUNC_IC6, IC6R },
+	{ IN_FUNC_U3CTS, U3CTSR },
+	{ IN_FUNC_U4RX, U4RXR },
+	{ IN_FUNC_U6RX, U6RXR },
+	{ IN_FUNC_SS2, SS2R },
+	{ IN_FUNC_SDI6, SDI6R },
+	{ IN_FUNC_OCFA, OCFAR },
+	{ IN_FUNC_REFCLKI3, REFCLKI3R },
+};
+
+void pic32_pps_input(int function, int pin)
+{
+	void __iomem *pps_base = ioremap_nocache(PPS_BASE, 0xF4);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(input_pin_reg); i++) {
+		if (input_pin_reg[i].function == function) {
+			__raw_writel(pin, pps_base + input_pin_reg[i].reg);
+			return;
+		}
+	}
+
+	iounmap(pps_base);
+}
+
+/* Output PPS Registers */
+#define RPA14R 0x1538
+#define RPA15R 0x153C
+#define RPB0R 0x1540
+#define RPB1R 0x1544
+#define RPB2R 0x1548
+#define RPB3R 0x154C
+#define RPB5R 0x1554
+#define RPB6R 0x1558
+#define RPB7R 0x155C
+#define RPB8R 0x1560
+#define RPB9R 0x1564
+#define RPB10R 0x1568
+#define RPB14R 0x1578
+#define RPB15R 0x157C
+#define RPC1R 0x1584
+#define RPC2R 0x1588
+#define RPC3R 0x158C
+#define RPC4R 0x1590
+#define RPC13R 0x15B4
+#define RPC14R 0x15B8
+#define RPD0R 0x15C0
+#define RPD1R 0x15C4
+#define RPD2R 0x15C8
+#define RPD3R 0x15CC
+#define RPD4R 0x15D0
+#define RPD5R 0x15D4
+#define RPD6R 0x15D8
+#define RPD7R 0x15DC
+#define RPD9R 0x15E4
+#define RPD10R 0x15E8
+#define RPD11R 0x15EC
+#define RPD12R 0x15F0
+#define RPD14R 0x15F8
+#define RPD15R 0x15FC
+#define RPE3R 0x160C
+#define RPE5R 0x1614
+#define RPE8R 0x1620
+#define RPE9R 0x1624
+#define RPF0R 0x1640
+#define RPF1R 0x1644
+#define RPF2R 0x1648
+#define RPF3R 0x164C
+#define RPF4R 0x1650
+#define RPF5R 0x1654
+#define RPF8R 0x1660
+#define RPF12R 0x1670
+#define RPF13R 0x1674
+#define RPG0R 0x1680
+#define RPG1R 0x1684
+#define RPG6R 0x1698
+#define RPG7R 0x169C
+#define RPG8R 0x16A0
+#define RPG9R 0x16A4
+
+static const struct
+{
+	int pin;
+	int reg;
+} output_pin_reg[] = {
+	{ OUT_RPD2, RPD2R },
+	{ OUT_RPG8, RPG8R },
+	{ OUT_RPF4, RPF4R },
+	{ OUT_RPD10, RPD10R },
+	{ OUT_RPF1, RPF1R },
+	{ OUT_RPB9, RPB9R },
+	{ OUT_RPB10, RPB10R },
+	{ OUT_RPC14, RPC14R },
+	{ OUT_RPB5, RPB5R },
+	{ OUT_RPC1, RPC1R },
+	{ OUT_RPD14, RPD14R },
+	{ OUT_RPG1, RPG1R },
+	{ OUT_RPA14, RPA14R },
+	{ OUT_RPD6, RPD6R },
+	{ OUT_RPD3, RPD3R },
+	{ OUT_RPG7, RPG7R },
+	{ OUT_RPF5, RPF5R },
+	{ OUT_RPD11, RPD11R },
+	{ OUT_RPF0, RPF0R },
+	{ OUT_RPB1, RPB1R },
+	{ OUT_RPE5, RPE5R },
+	{ OUT_RPC13, RPC13R },
+	{ OUT_RPB3, RPB3R },
+	{ OUT_RPC4, RPC4R },
+	{ OUT_RPD15, RPD15R },
+	{ OUT_RPG0, RPG0R },
+	{ OUT_RPA15, RPA15R },
+	{ OUT_RPD7, RPD7R },
+	{ OUT_RPD9, RPD9R },
+	{ OUT_RPG6, RPG6R },
+	{ OUT_RPB8, RPB8R },
+	{ OUT_RPB15, RPB15R },
+	{ OUT_RPD4, RPD4R },
+	{ OUT_RPB0, RPB0R },
+	{ OUT_RPE3, RPE3R },
+	{ OUT_RPB7, RPB7R },
+	{ OUT_RPF12, RPF12R },
+	{ OUT_RPD12, RPD12R },
+	{ OUT_RPF8, RPF8R },
+	{ OUT_RPC3, RPC3R },
+	{ OUT_RPE9, RPE9R },
+	{ OUT_RPD1, RPD1R },
+	{ OUT_RPG9, RPG9R },
+	{ OUT_RPB14, RPB14R },
+	{ OUT_RPD0, RPD0R },
+	{ OUT_RPB6, RPB6R },
+	{ OUT_RPD5, RPD5R },
+	{ OUT_RPB2, RPB2R },
+	{ OUT_RPF3, RPF3R },
+	{ OUT_RPF13, RPF13R },
+	{ OUT_RPC2, RPC2R },
+	{ OUT_RPE8, RPE8R },
+	{ OUT_RPF2, RPF2R },
+};
+
+void pic32_pps_output(int function, int pin)
+{
+	void __iomem *pps_base = ioremap_nocache(PPS_BASE, 0x170);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(output_pin_reg); i++) {
+		if (output_pin_reg[i].pin == pin) {
+			__raw_writel(function,
+				pps_base + output_pin_reg[i].reg);
+			return;
+		}
+	}
+
+	iounmap(pps_base);
+}
diff --git a/arch/mips/pic32/pic32mzda/early_pin.h b/arch/mips/pic32/pic32mzda/early_pin.h
new file mode 100644
index 000000000000..417fae9a9627
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/early_pin.h
@@ -0,0 +1,241 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#ifndef _PIC32MZDA_EARLY_PIN_H
+#define _PIC32MZDA_EARLY_PIN_H
+
+/*
+ * This is a complete, yet overly simplistic and unoptimized, PIC32MZDA PPS
+ * configuration only useful before we have full pinctrl initialized.
+ */
+
+/* Input PPS Functions */
+enum {
+	IN_FUNC_INT3,
+	IN_FUNC_T2CK,
+	IN_FUNC_T6CK,
+	IN_FUNC_IC3,
+	IN_FUNC_IC7,
+	IN_FUNC_U1RX,
+	IN_FUNC_U2CTS,
+	IN_FUNC_U5RX,
+	IN_FUNC_U6CTS,
+	IN_FUNC_SDI1,
+	IN_FUNC_SDI3,
+	IN_FUNC_SDI5,
+	IN_FUNC_SS6,
+	IN_FUNC_REFCLKI1,
+	IN_FUNC_INT4,
+	IN_FUNC_T5CK,
+	IN_FUNC_T7CK,
+	IN_FUNC_IC4,
+	IN_FUNC_IC8,
+	IN_FUNC_U3RX,
+	IN_FUNC_U4CTS,
+	IN_FUNC_SDI2,
+	IN_FUNC_SDI4,
+	IN_FUNC_C1RX,
+	IN_FUNC_REFCLKI4,
+	IN_FUNC_INT2,
+	IN_FUNC_T3CK,
+	IN_FUNC_T8CK,
+	IN_FUNC_IC2,
+	IN_FUNC_IC5,
+	IN_FUNC_IC9,
+	IN_FUNC_U1CTS,
+	IN_FUNC_U2RX,
+	IN_FUNC_U5CTS,
+	IN_FUNC_SS1,
+	IN_FUNC_SS3,
+	IN_FUNC_SS4,
+	IN_FUNC_SS5,
+	IN_FUNC_C2RX,
+	IN_FUNC_INT1,
+	IN_FUNC_T4CK,
+	IN_FUNC_T9CK,
+	IN_FUNC_IC1,
+	IN_FUNC_IC6,
+	IN_FUNC_U3CTS,
+	IN_FUNC_U4RX,
+	IN_FUNC_U6RX,
+	IN_FUNC_SS2,
+	IN_FUNC_SDI6,
+	IN_FUNC_OCFA,
+	IN_FUNC_REFCLKI3,
+};
+
+/* Input PPS Pins */
+#define IN_RPD2 0x00
+#define IN_RPG8 0x01
+#define IN_RPF4 0x02
+#define IN_RPD10 0x03
+#define IN_RPF1 0x04
+#define IN_RPB9 0x05
+#define IN_RPB10 0x06
+#define IN_RPC14 0x07
+#define IN_RPB5 0x08
+#define IN_RPC1 0x0A
+#define IN_RPD14 0x0B
+#define IN_RPG1 0x0C
+#define IN_RPA14 0x0D
+#define IN_RPD6 0x0E
+#define IN_RPD3 0x00
+#define IN_RPG7 0x01
+#define IN_RPF5 0x02
+#define IN_RPD11 0x03
+#define IN_RPF0 0x04
+#define IN_RPB1 0x05
+#define IN_RPE5 0x06
+#define IN_RPC13 0x07
+#define IN_RPB3 0x08
+#define IN_RPC4 0x0A
+#define IN_RPD15 0x0B
+#define IN_RPG0 0x0C
+#define IN_RPA15 0x0D
+#define IN_RPD7 0x0E
+#define IN_RPD9 0x00
+#define IN_RPG6 0x01
+#define IN_RPB8 0x02
+#define IN_RPB15 0x03
+#define IN_RPD4 0x04
+#define IN_RPB0 0x05
+#define IN_RPE3 0x06
+#define IN_RPB7 0x07
+#define IN_RPF12 0x09
+#define IN_RPD12 0x0A
+#define IN_RPF8 0x0B
+#define IN_RPC3 0x0C
+#define IN_RPE9 0x0D
+#define IN_RPD1 0x00
+#define IN_RPG9 0x01
+#define IN_RPB14 0x02
+#define IN_RPD0 0x03
+#define IN_RPB6 0x05
+#define IN_RPD5 0x06
+#define IN_RPB2 0x07
+#define IN_RPF3 0x08
+#define IN_RPF13 0x09
+#define IN_RPF2 0x0B
+#define IN_RPC2 0x0C
+#define IN_RPE8 0x0D
+
+/* Output PPS Pins */
+enum {
+	OUT_RPD2,
+	OUT_RPG8,
+	OUT_RPF4,
+	OUT_RPD10,
+	OUT_RPF1,
+	OUT_RPB9,
+	OUT_RPB10,
+	OUT_RPC14,
+	OUT_RPB5,
+	OUT_RPC1,
+	OUT_RPD14,
+	OUT_RPG1,
+	OUT_RPA14,
+	OUT_RPD6,
+	OUT_RPD3,
+	OUT_RPG7,
+	OUT_RPF5,
+	OUT_RPD11,
+	OUT_RPF0,
+	OUT_RPB1,
+	OUT_RPE5,
+	OUT_RPC13,
+	OUT_RPB3,
+	OUT_RPC4,
+	OUT_RPD15,
+	OUT_RPG0,
+	OUT_RPA15,
+	OUT_RPD7,
+	OUT_RPD9,
+	OUT_RPG6,
+	OUT_RPB8,
+	OUT_RPB15,
+	OUT_RPD4,
+	OUT_RPB0,
+	OUT_RPE3,
+	OUT_RPB7,
+	OUT_RPF12,
+	OUT_RPD12,
+	OUT_RPF8,
+	OUT_RPC3,
+	OUT_RPE9,
+	OUT_RPD1,
+	OUT_RPG9,
+	OUT_RPB14,
+	OUT_RPD0,
+	OUT_RPB6,
+	OUT_RPD5,
+	OUT_RPB2,
+	OUT_RPF3,
+	OUT_RPF13,
+	OUT_RPC2,
+	OUT_RPE8,
+	OUT_RPF2,
+};
+
+/* Output PPS Functions */
+#define OUT_FUNC_U3TX 0x01
+#define OUT_FUNC_U4RTS 0x02
+#define OUT_FUNC_SDO1 0x05
+#define OUT_FUNC_SDO2 0x06
+#define OUT_FUNC_SDO3 0x07
+#define OUT_FUNC_SDO5 0x09
+#define OUT_FUNC_SS6 0x0A
+#define OUT_FUNC_OC3 0x0B
+#define OUT_FUNC_OC6 0x0C
+#define OUT_FUNC_REFCLKO4 0x0D
+#define OUT_FUNC_C2OUT 0x0E
+#define OUT_FUNC_C1TX 0x0F
+#define OUT_FUNC_U1TX 0x01
+#define OUT_FUNC_U2RTS 0x02
+#define OUT_FUNC_U5TX 0x03
+#define OUT_FUNC_U6RTS 0x04
+#define OUT_FUNC_SDO1 0x05
+#define OUT_FUNC_SDO2 0x06
+#define OUT_FUNC_SDO3 0x07
+#define OUT_FUNC_SDO4 0x08
+#define OUT_FUNC_SDO5 0x09
+#define OUT_FUNC_OC4 0x0B
+#define OUT_FUNC_OC7 0x0C
+#define OUT_FUNC_REFCLKO1 0x0F
+#define OUT_FUNC_U3RTS 0x01
+#define OUT_FUNC_U4TX 0x02
+#define OUT_FUNC_U6TX 0x04
+#define OUT_FUNC_SS1 0x05
+#define OUT_FUNC_SS3 0x07
+#define OUT_FUNC_SS4 0x08
+#define OUT_FUNC_SS5 0x09
+#define OUT_FUNC_SDO6 0x0A
+#define OUT_FUNC_OC5 0x0B
+#define OUT_FUNC_OC8 0x0C
+#define OUT_FUNC_C1OUT 0x0E
+#define OUT_FUNC_REFCLKO3 0x0F
+#define OUT_FUNC_U1RTS 0x01
+#define OUT_FUNC_U2TX 0x02
+#define OUT_FUNC_U5RTS 0x03
+#define OUT_FUNC_U6TX 0x04
+#define OUT_FUNC_SS2 0x06
+#define OUT_FUNC_SDO4 0x08
+#define OUT_FUNC_SDO6 0x0A
+#define OUT_FUNC_OC2 0x0B
+#define OUT_FUNC_OC1 0x0C
+#define OUT_FUNC_OC9 0x0D
+#define OUT_FUNC_C2TX 0x0F
+
+void pic32_pps_input(int function, int pin);
+void pic32_pps_output(int function, int pin);
+
+#endif
diff --git a/arch/mips/pic32/pic32mzda/init.c b/arch/mips/pic32/pic32mzda/init.c
new file mode 100644
index 000000000000..775ff90a9962
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/init.c
@@ -0,0 +1,156 @@
+/*
+ * Joshua Henderson, joshua.henderson@microchip.com
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/sdhci-pic32.h>
+
+#include <asm/fw/fw.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/prom.h>
+
+#include "pic32mzda.h"
+
+const char *get_system_type(void)
+{
+	return "PIC32MZDA";
+}
+
+static ulong get_fdtaddr(void)
+{
+	ulong ftaddr = 0;
+
+	if ((fw_arg0 == -2) && fw_arg1 && !fw_arg2 && !fw_arg3)
+		return (ulong)fw_arg1;
+
+	if (__dtb_start < __dtb_end)
+		ftaddr = (ulong)__dtb_start;
+
+	return ftaddr;
+}
+
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+
+	dtb = (void *)get_fdtaddr();
+	if (!dtb) {
+		pr_err("pic32: no DTB found.\n");
+		return;
+	}
+
+	/*
+	 * Load the builtin device tree. This causes the chosen node to be
+	 * parsed resulting in our memory appearing.
+	 */
+	__dt_setup_arch(dtb);
+
+	pr_info("Found following command lines\n");
+	pr_info(" boot_command_line: %s\n", boot_command_line);
+	pr_info(" arcs_cmdline     : %s\n", arcs_cmdline);
+#ifdef CONFIG_CMDLINE_BOOL
+	pr_info(" builtin_cmdline  : %s\n", CONFIG_CMDLINE);
+#endif
+	if (dtb != __dtb_start)
+		strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+
+#ifdef CONFIG_EARLY_PRINTK
+	fw_init_early_console(-1);
+#endif
+	pic32_config_init();
+}
+
+static __init void pic32_init_cmdline(int argc, char *argv[])
+{
+	unsigned int count = COMMAND_LINE_SIZE - 1;
+	int i;
+	char *dst = &(arcs_cmdline[0]);
+	char *src;
+
+	for (i = 1; i < argc && count; ++i) {
+		src = argv[i];
+		while (*src && count) {
+			*dst++ = *src++;
+			--count;
+		}
+		*dst++ = ' ';
+	}
+	if (i > 1)
+		--dst;
+
+	*dst = 0;
+}
+
+void __init prom_init(void)
+{
+	pic32_init_cmdline((int)fw_arg0, (char **)fw_arg1);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init device_tree_init(void)
+{
+	if (!initial_boot_params)
+		return;
+
+	unflatten_and_copy_device_tree();
+}
+
+static struct pic32_sdhci_platform_data sdhci_data = {
+	.setup_dma = pic32_set_sdhci_adma_fifo_threshold,
+};
+
+static struct of_dev_auxdata pic32_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("microchip,pic32mzda-sdhci", 0, "sdhci", &sdhci_data),
+	{ /* sentinel */}
+};
+
+static int __init pic32_of_prepare_platform_data(struct of_dev_auxdata *lookup)
+{
+	struct device_node *root, *np;
+	struct resource res;
+
+	root = of_find_node_by_path("/");
+
+	for (; lookup->compatible; lookup++) {
+		np = of_find_compatible_node(NULL, NULL, lookup->compatible);
+		if (np) {
+			lookup->name = (char *)np->name;
+			if (lookup->phys_addr)
+				continue;
+			if (!of_address_to_resource(np, 0, &res))
+				lookup->phys_addr = res.start;
+		}
+	}
+
+	return 0;
+}
+
+static int __init plat_of_setup(void)
+{
+	if (!of_have_populated_dt())
+		panic("Device tree not present");
+
+	pic32_of_prepare_platform_data(pic32_auxdata_lookup);
+	if (of_platform_populate(NULL, of_default_bus_match_table,
+				 pic32_auxdata_lookup, NULL))
+		panic("Failed to populate DT");
+
+	return 0;
+}
+arch_initcall(plat_of_setup);
diff --git a/arch/mips/pic32/pic32mzda/pic32mzda.h b/arch/mips/pic32/pic32mzda/pic32mzda.h
new file mode 100644
index 000000000000..96d10e2af475
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/pic32mzda.h
@@ -0,0 +1,29 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#ifndef PIC32MZDA_COMMON_H
+#define PIC32MZDA_COMMON_H
+
+/* early clock */
+u32 pic32_get_pbclk(int bus);
+u32 pic32_get_sysclk(void);
+
+/* Device configuration */
+void __init pic32_config_init(void);
+int pic32_set_lcd_mode(int mode);
+int pic32_set_sdhci_adma_fifo_threshold(u32 rthrs, u32 wthrs);
+u32 pic32_get_boot_status(void);
+int pic32_disable_lcd(void);
+int pic32_enable_lcd(void);
+
+#endif
diff --git a/arch/mips/pic32/pic32mzda/time.c b/arch/mips/pic32/pic32mzda/time.c
new file mode 100644
index 000000000000..ca6a62bb10db
--- /dev/null
+++ b/arch/mips/pic32/pic32mzda/time.c
@@ -0,0 +1,73 @@
+/*
+ * Joshua Henderson <joshua.henderson@microchip.com>
+ * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+
+#include <asm/time.h>
+
+#include "pic32mzda.h"
+
+static const struct of_device_id pic32_infra_match[] = {
+	{ .compatible = "microchip,pic32mzda-infra", },
+	{ },
+};
+
+#define DEFAULT_CORE_TIMER_INTERRUPT 0
+
+static unsigned int pic32_xlate_core_timer_irq(void)
+{
+	static struct device_node *node;
+	unsigned int irq;
+
+	node = of_find_matching_node(NULL, pic32_infra_match);
+
+	if (WARN_ON(!node))
+		goto default_map;
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq)
+		goto default_map;
+
+	return irq;
+
+default_map:
+
+	return irq_create_mapping(NULL, DEFAULT_CORE_TIMER_INTERRUPT);
+}
+
+unsigned int get_c0_compare_int(void)
+{
+	return pic32_xlate_core_timer_irq();
+}
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	of_clk_init(NULL);
+	clk = clk_get_sys("cpu_clk", NULL);
+	if (IS_ERR(clk))
+		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+
+	clk_prepare_enable(clk);
+	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+	mips_hpt_frequency = clk_get_rate(clk) / 2;
+
+	clocksource_probe();
+}
diff --git a/arch/mips/pistachio/init.c b/arch/mips/pistachio/init.c
index 8bd8ebb20a72..96ba2cc9ad3e 100644
--- a/arch/mips/pistachio/init.c
+++ b/arch/mips/pistachio/init.c
@@ -58,7 +58,6 @@ void __init plat_mem_setup(void)
 		panic("Device-tree not present");
 
 	__dt_setup_arch((void *)fw_arg1);
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
 
 	plat_setup_iocoherency();
 }
diff --git a/arch/mips/pmcs-msp71xx/msp_serial.c b/arch/mips/pmcs-msp71xx/msp_serial.c
index d304be22b963..8e6e8db8dd5f 100644
--- a/arch/mips/pmcs-msp71xx/msp_serial.c
+++ b/arch/mips/pmcs-msp71xx/msp_serial.c
@@ -110,7 +110,7 @@ void __init msp_serial_setup(void)
 	up.uartclk	= uartclk;
 	up.regshift	= 2;
 	up.iotype	= UPIO_MEM;
-	up.flags	= ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	up.flags	= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
 	up.type		= PORT_16550A;
 	up.line		= 0;
 	up.serial_out	= msp_serial_out;
diff --git a/arch/mips/pmcs-msp71xx/msp_setup.c b/arch/mips/pmcs-msp71xx/msp_setup.c
index 4f925e06c414..9d293b3e9130 100644
--- a/arch/mips/pmcs-msp71xx/msp_setup.c
+++ b/arch/mips/pmcs-msp71xx/msp_setup.c
@@ -10,6 +10,8 @@
  * option) any later version.
  */
 
+#include <linux/delay.h>
+
 #include <asm/bootinfo.h>
 #include <asm/cacheflush.h>
 #include <asm/idle.h>
@@ -37,7 +39,6 @@ extern void msp_serial_setup(void);
 void msp7120_reset(void)
 {
 	void *start, *end, *iptr;
-	register int i;
 
 	/* Diasble all interrupts */
 	local_irq_disable();
@@ -77,7 +78,7 @@ void msp7120_reset(void)
 	 */
 
 	/* Wait a bit for the DDRC to settle */
-	for (i = 0; i < 100000000; i++);
+	mdelay(125);
 
 #if defined(CONFIG_PMC_MSP7120_GW)
 	/*
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index b4b774bc3178..3cd357737a26 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -180,7 +180,7 @@ static struct platform_device pnx833x_sata_device = {
 static void
 pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd_to_nand(mtd);
 	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
 
 	if (cmd == NAND_CMD_NONE)
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index e9bc8c96174e..813826a456ca 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -12,6 +12,11 @@ config RALINK_ILL_ACC
 	depends on SOC_RT305X
 	default y
 
+config IRQ_INTC
+	bool
+	default y
+	depends on !SOC_MT7621
+
 choice
 	prompt "Ralink SoC selection"
 	default SOC_RT305X
@@ -33,7 +38,18 @@ choice
 
 	config SOC_MT7620
 		bool "MT7620/8"
+		select HW_HAS_PCI
 
+	config SOC_MT7621
+		bool "MT7621"
+		select MIPS_CPU_SCACHE
+		select SYS_SUPPORTS_MULTITHREADING
+		select SYS_SUPPORTS_SMP
+		select SYS_SUPPORTS_MIPS_CPS
+		select MIPS_GIC
+		select COMMON_CLK
+		select CLKSRC_MIPS_GIC
+		select HW_HAS_PCI
 endchoice
 
 choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index a6c9d0061326..0d1795a0321e 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,16 +6,24 @@
 # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
 # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
 
-obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+obj-y := prom.o of.o reset.o
+
+ifndef CONFIG_MIPS_GIC
+	obj-y += clk.o timer.o
+endif
 
 obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
 
 obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
 
+obj-$(CONFIG_IRQ_INTC) += irq.o
+obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o
+
 obj-$(CONFIG_SOC_RT288X) += rt288x.o
 obj-$(CONFIG_SOC_RT305X) += rt305x.o
 obj-$(CONFIG_SOC_RT3883) += rt3883.o
 obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_SOC_MT7621) += mt7621.o
 
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6d9c8c499f98..6095fcc334f4 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
 #
 load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
 cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
+
+# Ralink MT7621
+#
+load-$(CONFIG_SOC_MT7621)	+= 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7621)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
index a8e70a9f274b..e46f91f971c5 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -48,7 +48,7 @@ static int systick_next_event(unsigned long delta,
 	sdev = container_of(evt, struct systick_device, dev);
 	count = ioread32(sdev->membase + SYSTICK_COUNT);
 	count = (count + delta) % SYSTICK_FREQ;
-	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+	iowrite32(count, sdev->membase + SYSTICK_COMPARE);
 
 	return 0;
 }
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index 255d695ec8c6..3c59ffe5f5f5 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -25,11 +25,13 @@
 #define MT7628_CHIP_NAME1	0x20203832
 
 #define UART_REG_TX		0x04
+#define UART_REG_LCR		0x0c
 #define UART_REG_LSR		0x14
 #define UART_REG_LSR_RT2880	0x1c
 
 static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
 static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
+static int init_complete;
 
 static inline void uart_w32(u32 val, unsigned reg)
 {
@@ -47,8 +49,32 @@ static inline int soc_is_mt7628(void)
 		(__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
 }
 
+static void find_uart_base(void)
+{
+	int i;
+
+	if (!soc_is_mt7628())
+		return;
+
+	for (i = 0; i < 3; i++) {
+		u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
+
+		if (!reg)
+			continue;
+
+		uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE +
+							  (0x100 * i));
+		break;
+	}
+}
+
 void prom_putchar(unsigned char ch)
 {
+	if (!init_complete) {
+		find_uart_base();
+		init_complete = 1;
+	}
+
 	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
 		uart_w32(ch, UART_TX);
 		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
new file mode 100644
index 000000000000..50d6c55ab1de
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mips-gic.h>
+
+int get_c0_perfcount_int(void)
+{
+	return gic_get_c0_perfcount_int();
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index 2ea5ff6dc22e..0d3d1a97895f 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -37,8 +37,17 @@
 #define PMU1_CFG		0x8C
 #define DIG_SW_SEL		BIT(25)
 
-/* is this a MT7620 or a MT7628 */
-enum mt762x_soc_type mt762x_soc;
+/* clock scaling */
+#define CLKCFG_FDIV_MASK	0x1f00
+#define CLKCFG_FDIV_USB_VAL	0x0300
+#define CLKCFG_FFRAC_MASK	0x001f
+#define CLKCFG_FFRAC_USB_VAL	0x0003
+
+/* EFUSE bits */
+#define EFUSE_MT7688		0x100000
+
+/* DRAM type bit */
+#define DRAM_TYPE_MT7628_MASK	0x1
 
 /* does the board have sdram or ddram */
 static int dram_type;
@@ -98,31 +107,31 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
 };
 
 static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 19, 1),
+	FUNC("sdxc d6", 3, 19, 1),
 	FUNC("utif", 2, 19, 1),
 	FUNC("gpio", 1, 19, 1),
-	FUNC("pwm", 0, 19, 1),
+	FUNC("pwm1", 0, 19, 1),
 };
 
 static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-	FUNC("sdcx", 3, 18, 1),
+	FUNC("sdxc d7", 3, 18, 1),
 	FUNC("utif", 2, 18, 1),
 	FUNC("gpio", 1, 18, 1),
-	FUNC("pwm", 0, 18, 1),
+	FUNC("pwm0", 0, 18, 1),
 };
 
 static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-	FUNC("sdcx", 3, 20, 2),
+	FUNC("sdxc d5 d4", 3, 20, 2),
 	FUNC("pwm", 2, 20, 2),
 	FUNC("gpio", 1, 20, 2),
-	FUNC("uart", 0, 20, 2),
+	FUNC("uart2", 0, 20, 2),
 };
 
 static struct rt2880_pmx_func uart1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 45, 2),
+	FUNC("sw_r", 3, 45, 2),
 	FUNC("pwm", 2, 45, 2),
 	FUNC("gpio", 1, 45, 2),
-	FUNC("uart", 0, 45, 2),
+	FUNC("uart1", 0, 45, 2),
 };
 
 static struct rt2880_pmx_func i2c_grp_mt7628[] = {
@@ -134,21 +143,21 @@ static struct rt2880_pmx_func i2c_grp_mt7628[] = {
 
 static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
 static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
 static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
 
 static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
 	FUNC("jtag", 3, 22, 8),
 	FUNC("utif", 2, 22, 8),
 	FUNC("gpio", 1, 22, 8),
-	FUNC("sdcx", 0, 22, 8),
+	FUNC("sdxc", 0, 22, 8),
 };
 
 static struct rt2880_pmx_func uart0_grp_mt7628[] = {
 	FUNC("-", 3, 12, 2),
 	FUNC("-", 2, 12, 2),
 	FUNC("gpio", 1, 12, 2),
-	FUNC("uart", 0, 12, 2),
+	FUNC("uart0", 0, 12, 2),
 };
 
 static struct rt2880_pmx_func i2s_grp_mt7628[] = {
@@ -162,7 +171,7 @@ static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
 	FUNC("-", 3, 6, 1),
 	FUNC("refclk", 2, 6, 1),
 	FUNC("gpio", 1, 6, 1),
-	FUNC("spi", 0, 6, 1),
+	FUNC("spi cs1", 0, 6, 1),
 };
 
 static struct rt2880_pmx_func spis_grp_mt7628[] = {
@@ -179,28 +188,44 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = {
 	FUNC("gpio", 0, 11, 1),
 };
 
-#define MT7628_GPIO_MODE_MASK	0x3
-
-#define MT7628_GPIO_MODE_PWM1	30
-#define MT7628_GPIO_MODE_PWM0	28
-#define MT7628_GPIO_MODE_UART2	26
-#define MT7628_GPIO_MODE_UART1	24
-#define MT7628_GPIO_MODE_I2C	20
-#define MT7628_GPIO_MODE_REFCLK	18
-#define MT7628_GPIO_MODE_PERST	16
-#define MT7628_GPIO_MODE_WDT	14
-#define MT7628_GPIO_MODE_SPI	12
-#define MT7628_GPIO_MODE_SDMODE	10
-#define MT7628_GPIO_MODE_UART0	8
-#define MT7628_GPIO_MODE_I2S	6
-#define MT7628_GPIO_MODE_CS1	4
-#define MT7628_GPIO_MODE_SPIS	2
-#define MT7628_GPIO_MODE_GPIO	0
+static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_kn", 0, 35, 1),
+};
+
+static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_an", 0, 35, 1),
+};
+
+#define MT7628_GPIO_MODE_MASK		0x3
+
+#define MT7628_GPIO_MODE_WLED_KN	48
+#define MT7628_GPIO_MODE_WLED_AN	32
+#define MT7628_GPIO_MODE_PWM1		30
+#define MT7628_GPIO_MODE_PWM0		28
+#define MT7628_GPIO_MODE_UART2		26
+#define MT7628_GPIO_MODE_UART1		24
+#define MT7628_GPIO_MODE_I2C		20
+#define MT7628_GPIO_MODE_REFCLK		18
+#define MT7628_GPIO_MODE_PERST		16
+#define MT7628_GPIO_MODE_WDT		14
+#define MT7628_GPIO_MODE_SPI		12
+#define MT7628_GPIO_MODE_SDMODE		10
+#define MT7628_GPIO_MODE_UART0		8
+#define MT7628_GPIO_MODE_I2S		6
+#define MT7628_GPIO_MODE_CS1		4
+#define MT7628_GPIO_MODE_SPIS		2
+#define MT7628_GPIO_MODE_GPIO		0
 
 static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 	GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM1),
-	GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+	GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM0),
 	GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_UART2),
@@ -224,9 +249,19 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 				1, MT7628_GPIO_MODE_SPIS),
 	GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_GPIO),
+	GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_AN),
+	GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_KN),
 	{ 0 }
 };
 
+static inline int is_mt76x8(void)
+{
+	return ralink_soc == MT762X_SOC_MT7628AN ||
+	       ralink_soc == MT762X_SOC_MT7688;
+}
+
 static __init u32
 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
@@ -381,7 +416,7 @@ void __init ralink_clk_init(void)
 #define RINT(x)		((x) / 1000000)
 #define RFRAC(x)	(((x) / 1000) % 1000)
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN) {
+	if (is_mt76x8()) {
 		if (xtal_rate == MHZ(40))
 			cpu_rate = MHZ(580);
 		else
@@ -421,8 +456,25 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000100.timer", periph_rate);
 	ralink_clk_add("10000120.watchdog", periph_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", periph_rate);
+	ralink_clk_add("10000d00.uart1", periph_rate);
+	ralink_clk_add("10000e00.uart2", periph_rate);
 	ralink_clk_add("10180000.wmac", xtal_rate);
+
+	if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) {
+		/*
+		 * When the CPU goes into sleep mode, the BUS clock will be
+		 * too low for USB to function properly. Adjust the busses
+		 * fractional divider to fix this
+		 */
+		u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+		val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+		val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+		rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+	}
 }
 
 void __init ralink_of_remap(void)
@@ -499,36 +551,44 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
 		if (bga) {
-			mt762x_soc = MT762X_SOC_MT7620A;
+			ralink_soc = MT762X_SOC_MT7620A;
 			name = "MT7620A";
 			soc_info->compatible = "ralink,mt7620a-soc";
 		} else {
-			mt762x_soc = MT762X_SOC_MT7620N;
+			ralink_soc = MT762X_SOC_MT7620N;
 			name = "MT7620N";
 			soc_info->compatible = "ralink,mt7620n-soc";
-#ifdef CONFIG_PCI
-			panic("mt7620n is only supported for non pci kernels");
-#endif
 		}
 	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-		mt762x_soc = MT762X_SOC_MT7628AN;
-		name = "MT7628AN";
+		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+		if (efuse & EFUSE_MT7688) {
+			ralink_soc = MT762X_SOC_MT7688;
+			name = "MT7688";
+		} else {
+			ralink_soc = MT762X_SOC_MT7628AN;
+			name = "MT7628AN";
+		}
 		soc_info->compatible = "ralink,mt7628an-soc";
 	} else {
 		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
 	}
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-		"Ralink %s ver:%u eco:%u",
+		"MediaTek %s ver:%u eco:%u",
 		name,
 		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
 		(rev & CHIP_REV_ECO_MASK));
 
 	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
-	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+	if (is_mt76x8())
+		dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
+	else
+		dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) &
+			    SYSCFG0_DRAM_TYPE_MASK;
 
 	soc_info->mem_base = MT7620_DRAM_BASE;
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		mt7628_dram_init(soc_info);
 	else
 		mt7620_dram_init(soc_info);
@@ -541,7 +601,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		rt2880_pinmux_data = mt7628an_pinmux_data;
 	else
 		rt2880_pinmux_data = mt7620a_pinmux_data;
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
new file mode 100644
index 000000000000..e9b9fa3e1e51
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,226 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/smp-ops.h>
+#include <asm/mips-cm.h>
+#include <asm/mips-cpc.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7621.h>
+
+#include <pinmux.h>
+
+#include "common.h"
+
+#define SYSC_REG_SYSCFG		0x10
+#define SYSC_REG_CPLL_CLKCFG0	0x2c
+#define SYSC_REG_CUR_CLK_STS	0x44
+#define CPU_CLK_SEL		(BIT(30) | BIT(31))
+
+#define MT7621_GPIO_MODE_UART1		1
+#define MT7621_GPIO_MODE_I2C		2
+#define MT7621_GPIO_MODE_UART3_MASK	0x3
+#define MT7621_GPIO_MODE_UART3_SHIFT	3
+#define MT7621_GPIO_MODE_UART3_GPIO	1
+#define MT7621_GPIO_MODE_UART2_MASK	0x3
+#define MT7621_GPIO_MODE_UART2_SHIFT	5
+#define MT7621_GPIO_MODE_UART2_GPIO	1
+#define MT7621_GPIO_MODE_JTAG		7
+#define MT7621_GPIO_MODE_WDT_MASK	0x3
+#define MT7621_GPIO_MODE_WDT_SHIFT	8
+#define MT7621_GPIO_MODE_WDT_GPIO	1
+#define MT7621_GPIO_MODE_PCIE_RST	0
+#define MT7621_GPIO_MODE_PCIE_REF	2
+#define MT7621_GPIO_MODE_PCIE_MASK	0x3
+#define MT7621_GPIO_MODE_PCIE_SHIFT	10
+#define MT7621_GPIO_MODE_PCIE_GPIO	1
+#define MT7621_GPIO_MODE_MDIO_MASK	0x3
+#define MT7621_GPIO_MODE_MDIO_SHIFT	12
+#define MT7621_GPIO_MODE_MDIO_GPIO	1
+#define MT7621_GPIO_MODE_RGMII1		14
+#define MT7621_GPIO_MODE_RGMII2		15
+#define MT7621_GPIO_MODE_SPI_MASK	0x3
+#define MT7621_GPIO_MODE_SPI_SHIFT	16
+#define MT7621_GPIO_MODE_SPI_GPIO	1
+#define MT7621_GPIO_MODE_SDHCI_MASK	0x3
+#define MT7621_GPIO_MODE_SDHCI_SHIFT	18
+#define MT7621_GPIO_MODE_SDHCI_GPIO	1
+
+static struct rt2880_pmx_func uart1_grp[] =  { FUNC("uart1", 0, 1, 2) };
+static struct rt2880_pmx_func i2c_grp[] =  { FUNC("i2c", 0, 3, 2) };
+static struct rt2880_pmx_func uart3_grp[] = {
+	FUNC("uart3", 0, 5, 4),
+	FUNC("i2s", 2, 5, 4),
+	FUNC("spdif3", 3, 5, 4),
+};
+static struct rt2880_pmx_func uart2_grp[] = {
+	FUNC("uart2", 0, 9, 4),
+	FUNC("pcm", 2, 9, 4),
+	FUNC("spdif2", 3, 9, 4),
+};
+static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct rt2880_pmx_func wdt_grp[] = {
+	FUNC("wdt rst", 0, 18, 1),
+	FUNC("wdt refclk", 2, 18, 1),
+};
+static struct rt2880_pmx_func pcie_rst_grp[] = {
+	FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
+	FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
+};
+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct rt2880_pmx_func spi_grp[] = {
+	FUNC("spi", 0, 34, 7),
+	FUNC("nand1", 2, 34, 7),
+};
+static struct rt2880_pmx_func sdhci_grp[] = {
+	FUNC("sdhci", 0, 41, 8),
+	FUNC("nand2", 2, 41, 8),
+};
+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+
+static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+	GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
+	GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
+	GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
+		MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
+	GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
+		MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
+	GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
+	GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+		MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
+	GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+		MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
+	GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
+		MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
+	GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
+	GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+		MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
+	GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+		MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
+	GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+	{ 0 }
+};
+
+phys_addr_t mips_cpc_default_phys_base(void)
+{
+	panic("Cannot detect cpc address");
+}
+
+void __init ralink_clk_init(void)
+{
+	int cpu_fdiv = 0;
+	int cpu_ffrac = 0;
+	int fbdiv = 0;
+	u32 clk_sts, syscfg;
+	u8 clk_sel = 0, xtal_mode;
+	u32 cpu_clk;
+
+	if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+		clk_sel = 1;
+
+	switch (clk_sel) {
+	case 0:
+		clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+		cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+		cpu_ffrac = (clk_sts & 0x1F);
+		cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
+		break;
+
+	case 1:
+		fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+		syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+		xtal_mode = (syscfg >> 6) & 0x7;
+		if (xtal_mode >= 6) {
+			/* 25Mhz Xtal */
+			cpu_clk = 25 * fbdiv * 1000 * 1000;
+		} else if (xtal_mode >= 3) {
+			/* 40Mhz Xtal */
+			cpu_clk = 40 * fbdiv * 1000 * 1000;
+		} else {
+			/* 20Mhz Xtal */
+			cpu_clk = 20 * fbdiv * 1000 * 1000;
+		}
+		break;
+	}
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+	rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
+	unsigned char *name = NULL;
+	u32 n0;
+	u32 n1;
+	u32 rev;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+	if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
+		name = "MT7621";
+		soc_info->compatible = "mtk,mt7621-soc";
+	} else {
+		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+	}
+
+	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"MediaTek %s ver:%u eco:%u",
+		name,
+		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+		(rev & CHIP_REV_ECO_MASK));
+
+	soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
+	soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
+	soc_info->mem_base = MT7621_DRAM_BASE;
+
+	rt2880_pinmux_data = mt7621_pinmux_data;
+
+	/* Early detection of CMP support */
+	mips_cm_probe();
+	mips_cpc_probe();
+
+	if (mips_cm_numiocu()) {
+		/*
+		 * mips_cm_probe() wipes out bootloader
+		 * config for CM regions and we have to configure them
+		 * again. This SoC cannot talk to pamlbus devices
+		 * witout proper iocu region set up.
+		 *
+		 * FIXME: it would be better to do this with values
+		 * from DT, but we need this very early because
+		 * without this we cannot talk to pretty much anything
+		 * including serial.
+		 */
+		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
+		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
+				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
+	}
+
+	if (!register_cps_smp_ops())
+		return;
+	if (!register_cmp_smp_ops())
+		return;
+	if (!register_vsmp_smp_ops())
+		return;
+}
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 0d30dcd63246..f9eda5d8f82c 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -74,8 +74,6 @@ void __init plat_mem_setup(void)
 	 */
 	__dt_setup_arch(__dtb_start);
 
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
 	of_scan_flat_dt(early_init_dt_find_memory, NULL);
 	if (memory_dtb)
 		of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
index 09419f67da39..39a9142f71be 100644
--- a/arch/mips/ralink/prom.c
+++ b/arch/mips/ralink/prom.c
@@ -15,11 +15,16 @@
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 
+#include <asm/mach-ralink/ralink_regs.h>
+
 #include "common.h"
 
 struct ralink_soc_info soc_info;
 struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
 
+enum ralink_soc_type ralink_soc;
+EXPORT_SYMBOL_GPL(ralink_soc);
+
 const char *get_system_type(void)
 {
 	return soc_info.sys_type;
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
index 55c7ec59df3c..ee117c4bc4a3 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -11,6 +11,7 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/delay.h>
 #include <linux/reset-controller.h>
 
 #include <asm/reboot.h>
@@ -18,8 +19,10 @@
 #include <asm/mach-ralink/ralink_regs.h>
 
 /* Reset Control */
-#define SYSC_REG_RESET_CTRL     0x034
-#define RSTCTL_RESET_SYSTEM     BIT(0)
+#define SYSC_REG_RESET_CTRL	0x034
+
+#define RSTCTL_RESET_PCI	BIT(26)
+#define RSTCTL_RESET_SYSTEM	BIT(0)
 
 static int ralink_assert_device(struct reset_controller_dev *rcdev,
 				unsigned long id)
@@ -83,6 +86,11 @@ void ralink_rst_init(void)
 
 static void ralink_restart(char *command)
 {
+	if (IS_ENABLED(CONFIG_PCI)) {
+		rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL);
+		mdelay(50);
+	}
+
 	local_irq_disable();
 	rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
 	unreachable();
@@ -98,7 +106,6 @@ static int __init mips_reboot_setup(void)
 {
 	_machine_restart = ralink_restart;
 	_machine_halt = ralink_halt;
-	pm_power_off = ralink_halt;
 
 	return 0;
 }
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 738cec865f41..3c84166ebcb7 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -119,4 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt2880_pinmux_data_act;
+	ralink_soc = RT2880_SOC;
 }
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index c40776ab67db..d7c4ba43a428 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -21,8 +21,6 @@
 
 #include "common.h"
 
-enum rt305x_soc_type rt305x_soc;
-
 static struct rt2880_pmx_func i2c_func[] =  { FUNC("i2c", 0, 1, 2) };
 static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
 static struct rt2880_pmx_func uartf_func[] = {
@@ -201,7 +199,9 @@ void __init ralink_clk_init(void)
 	}
 
 	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("sys", sys_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000100.timer", wdt_rate);
 	ralink_clk_add("10000120.watchdog", wdt_rate);
 	ralink_clk_add("10000500.uart", uart_rate);
@@ -235,24 +235,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 		icache_sets = (read_c0_config1() >> 22) & 7;
 		if (icache_sets == 1) {
-			rt305x_soc = RT305X_SOC_RT3050;
+			ralink_soc = RT305X_SOC_RT3050;
 			name = "RT3050";
 			soc_info->compatible = "ralink,rt3050-soc";
 		} else {
-			rt305x_soc = RT305X_SOC_RT3052;
+			ralink_soc = RT305X_SOC_RT3052;
 			name = "RT3052";
 			soc_info->compatible = "ralink,rt3052-soc";
 		}
 	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3350;
+		ralink_soc = RT305X_SOC_RT3350;
 		name = "RT3350";
 		soc_info->compatible = "ralink,rt3350-soc";
 	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3352;
+		ralink_soc = RT305X_SOC_RT3352;
 		name = "RT3352";
 		soc_info->compatible = "ralink,rt3352-soc";
 	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT5350;
+		ralink_soc = RT305X_SOC_RT5350;
 		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
 	} else {
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index 86a535c770d8..fafec947b27d 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -109,6 +109,7 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000120.watchdog", sys_rate);
 	ralink_clk_add("10000500.uart", 40000000);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", 40000000);
 	ralink_clk_add("10100000.ethernet", sys_rate);
 	ralink_clk_add("10180000.wmac", 40000000);
@@ -153,4 +154,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt3883_pinmux_data;
+
+	ralink_soc == RT3883_SOC;
 }
diff --git a/arch/mips/ralink/timer-gic.c b/arch/mips/ralink/timer-gic.c
new file mode 100644
index 000000000000..5b4f186bcf95
--- /dev/null
+++ b/arch/mips/ralink/timer-gic.c
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+#include "common.h"
+
+void __init plat_time_init(void)
+{
+	ralink_of_remap();
+
+	of_clk_init(NULL);
+	clocksource_probe();
+}
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 9bd7a2de0765..0966adccf520 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -148,7 +148,7 @@ static int rb532_dev_ready(struct mtd_info *mtd)
 
 static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 	unsigned char orbits, nandbits;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 650d5d39f34d..fdc704abc8d4 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -32,7 +32,7 @@
 #include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <asm/mach-rc32434/rb.h>
 #include <asm/mach-rc32434/gpio.h>
@@ -88,8 +88,8 @@ static int rb532_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct rb532_gpio_chip	*gpch;
 
-	gpch = container_of(chip, struct rb532_gpio_chip, chip);
-	return rb532_get_bit(offset, gpch->regbase + GPIOD);
+	gpch = gpiochip_get_data(chip);
+	return !!rb532_get_bit(offset, gpch->regbase + GPIOD);
 }
 
 /*
@@ -100,7 +100,7 @@ static void rb532_gpio_set(struct gpio_chip *chip,
 {
 	struct rb532_gpio_chip	*gpch;
 
-	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	gpch = gpiochip_get_data(chip);
 	rb532_set_bit(value, offset, gpch->regbase + GPIOD);
 }
 
@@ -111,7 +111,7 @@ static int rb532_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct rb532_gpio_chip	*gpch;
 
-	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	gpch = gpiochip_get_data(chip);
 
 	/* disable alternate function in case it's set */
 	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
@@ -128,7 +128,7 @@ static int rb532_gpio_direction_output(struct gpio_chip *chip,
 {
 	struct rb532_gpio_chip	*gpch;
 
-	gpch = container_of(chip, struct rb532_gpio_chip, chip);
+	gpch = gpiochip_get_data(chip);
 
 	/* disable alternate function in case it's set */
 	rb532_set_bit(0, offset, gpch->regbase + GPIOFUNC);
@@ -200,7 +200,7 @@ int __init rb532_gpio_init(void)
 	}
 
 	/* Register our GPIO chip */
-	gpiochip_add(&rb532_gpio_chip->chip);
+	gpiochip_add_data(&rb532_gpio_chip->chip, rb532_gpio_chip);
 
 	return 0;
 }
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 8d0eb2643248..f1f88291451e 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -7,7 +7,7 @@
  * Copyright (C) 2000 by Silicon Graphics, Inc.
  * Copyright (C) 2004 by Christoph Hellwig
  *
- * On SGI IP27 the ARC memory configuration data is completly bogus but
+ * On SGI IP27 the ARC memory configuration data is completely bogus but
  * alternate easier to use mechanisms are available.
  */
 #include <linux/init.h>
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
index 244f9427625b..6afa34346b81 100644
--- a/arch/mips/sni/reset.c
+++ b/arch/mips/sni/reset.c
@@ -3,6 +3,8 @@
  *
  *  Reset a SNI machine.
  */
+#include <linux/delay.h>
+
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
@@ -24,7 +26,7 @@ static inline void kb_wait(void)
 /* XXX This ends up at the ARC firmware prompt ...  */
 void sni_machine_restart(char *command)
 {
-	int i, j;
+	int i;
 
 	/* This does a normal via the keyboard controller like a PC.
 	   We can do that easier ...  */
@@ -32,9 +34,9 @@ void sni_machine_restart(char *command)
 	for (;;) {
 		for (i = 0; i < 100; i++) {
 			kb_wait();
-			for (j = 0; j < 100000 ; j++)
-				/* nothing */;
+			udelay(50);
 			outb_p(0xfe, 0x64);	 /* pulse reset low */
+			udelay(50);
 		}
 	}
 }
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 9d9962ab7d25..108f8a8d1640 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
 #include <linux/mtd/physmap.h>
@@ -687,16 +687,14 @@ struct txx9_iocled_data {
 
 static int txx9_iocled_get(struct gpio_chip *chip, unsigned int offset)
 {
-	struct txx9_iocled_data *data =
-		container_of(chip, struct txx9_iocled_data, chip);
-	return data->cur_val & (1 << offset);
+	struct txx9_iocled_data *data = gpiochip_get_data(chip);
+	return !!(data->cur_val & (1 << offset));
 }
 
 static void txx9_iocled_set(struct gpio_chip *chip, unsigned int offset,
 			    int value)
 {
-	struct txx9_iocled_data *data =
-		container_of(chip, struct txx9_iocled_data, chip);
+	struct txx9_iocled_data *data = gpiochip_get_data(chip);
 	unsigned long flags;
 	spin_lock_irqsave(&txx9_iocled_lock, flags);
 	if (value)
@@ -749,7 +747,7 @@ void __init txx9_iocled_init(unsigned long baseaddr,
 	iocled->chip.label = "iocled";
 	iocled->chip.base = basenum;
 	iocled->chip.ngpio = num;
-	if (gpiochip_add(&iocled->chip))
+	if (gpiochip_add_data(&iocled->chip, iocled))
 		goto out_unmap;
 	if (basenum < 0)
 		basenum = iocled->chip.base;
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index e3733cde50d6..402ac2ec7e83 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -320,11 +320,12 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask)
 #if IS_ENABLED(CONFIG_TC35815)
 static u32 tx4939_get_eth_speed(struct net_device *dev)
 {
-	struct ethtool_cmd cmd;
-	if (__ethtool_get_settings(dev, &cmd))
+	struct ethtool_link_ksettings cmd;
+
+	if (__ethtool_get_link_ksettings(dev, &cmd))
 		return 100;	/* default 100Mbps */
 
-	return ethtool_cmd_speed(&cmd);
+	return cmd.base.speed;
 }
 
 static int tx4939_netdev_event(struct notifier_block *this,
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
index c9afd05020e0..54de66837103 100644
--- a/arch/mips/txx9/rbtx4938/setup.c
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -14,6 +14,7 @@
 #include <linux/ioport.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/gpio/driver.h>
 #include <linux/gpio.h>
 #include <linux/mtd/physmap.h>
 
@@ -335,7 +336,7 @@ static void __init rbtx4938_mtd_init(void)
 
 static void __init rbtx4938_arch_init(void)
 {
-	gpiochip_add(&rbtx4938_spi_gpio_chip);
+	gpiochip_add_data(&rbtx4938_spi_gpio_chip, NULL);
 	rbtx4938_pci_setup();
 	rbtx4938_spi_init();
 }
diff --git a/arch/mips/vdso/.gitignore b/arch/mips/vdso/.gitignore
new file mode 100644
index 000000000000..5286a7d73d79
--- /dev/null
+++ b/arch/mips/vdso/.gitignore
@@ -0,0 +1,4 @@
+*.so*
+vdso-*image.c
+genvdso
+vdso*.lds
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
new file mode 100644
index 000000000000..ee3617c0c5e2
--- /dev/null
+++ b/arch/mips/vdso/Makefile
@@ -0,0 +1,160 @@
+# Objects to go into the VDSO.
+obj-vdso-y := elf.o gettimeofday.o sigreturn.o
+
+# Common compiler flags between ABIs.
+ccflags-vdso := \
+	$(filter -I%,$(KBUILD_CFLAGS)) \
+	$(filter -E%,$(KBUILD_CFLAGS)) \
+	$(filter -march=%,$(KBUILD_CFLAGS))
+cflags-vdso := $(ccflags-vdso) \
+	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
+	-O2 -g -fPIC -fno-common -fno-builtin -G 0 -DDISABLE_BRANCH_PROFILING \
+	$(call cc-option, -fno-stack-protector)
+aflags-vdso := $(ccflags-vdso) \
+	$(filter -I%,$(KBUILD_CFLAGS)) \
+	$(filter -E%,$(KBUILD_CFLAGS)) \
+	-D__ASSEMBLY__ -Wa,-gdwarf-2
+
+#
+# For the pre-R6 code in arch/mips/vdso/vdso.h for locating
+# the base address of VDSO, the linker will emit a R_MIPS_PC32
+# relocation in binutils > 2.25 but it will fail with older versions
+# because that relocation is not supported for that symbol. As a result
+# of which we are forced to disable the VDSO symbols when building
+# with < 2.25 binutils on pre-R6 kernels. For more references on why we
+# can't use other methods to get the base address of VDSO please refer to
+# the comments on that file.
+#
+ifndef CONFIG_CPU_MIPSR6
+  ifeq ($(call ld-ifversion, -lt, 225000000, y),y)
+    $(warning MIPS VDSO requires binutils >= 2.25)
+    obj-vdso-y := $(filter-out gettimeofday.o, $(obj-vdso-y))
+    ccflags-vdso += -DDISABLE_MIPS_VDSO
+  endif
+endif
+
+# VDSO linker flags.
+VDSO_LDFLAGS := \
+	-Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 \
+	-nostdlib -shared \
+	$(call cc-ldoption, -Wl$(comma)--hash-style=sysv) \
+	$(call cc-ldoption, -Wl$(comma)--build-id)
+
+GCOV_PROFILE := n
+
+#
+# Shared build commands.
+#
+
+quiet_cmd_vdsold = VDSO    $@
+      cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \
+                   -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
+
+hostprogs-y := genvdso
+
+quiet_cmd_genvdso = GENVDSO $@
+define cmd_genvdso
+	cp $< $(<:%.dbg=%) && \
+	$(OBJCOPY) -S $< $(<:%.dbg=%) && \
+	$(obj)/genvdso $< $(<:%.dbg=%) $@ $(VDSO_NAME)
+endef
+
+#
+# Build native VDSO.
+#
+
+native-abi := $(filter -mabi=%,$(KBUILD_CFLAGS))
+
+targets += $(obj-vdso-y)
+targets += vdso.lds vdso.so.dbg vdso.so vdso-image.c
+
+obj-vdso := $(obj-vdso-y:%.o=$(obj)/%.o)
+
+$(obj-vdso): KBUILD_CFLAGS := $(cflags-vdso) $(native-abi)
+$(obj-vdso): KBUILD_AFLAGS := $(aflags-vdso) $(native-abi)
+
+$(obj)/vdso.lds: KBUILD_CPPFLAGS := $(native-abi)
+
+$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
+	$(call if_changed,vdsold)
+
+$(obj)/vdso-image.c: $(obj)/vdso.so.dbg $(obj)/genvdso FORCE
+	$(call if_changed,genvdso)
+
+obj-y += vdso-image.o
+
+#
+# Build O32 VDSO.
+#
+
+# Define these outside the ifdef to ensure they are picked up by clean.
+targets += $(obj-vdso-y:%.o=%-o32.o)
+targets += vdso-o32.lds vdso-o32.so.dbg vdso-o32.so vdso-o32-image.c
+
+ifdef CONFIG_MIPS32_O32
+
+obj-vdso-o32 := $(obj-vdso-y:%.o=$(obj)/%-o32.o)
+
+$(obj-vdso-o32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=32
+$(obj-vdso-o32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=32
+
+$(obj)/%-o32.o: $(src)/%.S FORCE
+	$(call if_changed_dep,as_o_S)
+
+$(obj)/%-o32.o: $(src)/%.c FORCE
+	$(call cmd,force_checksrc)
+	$(call if_changed_rule,cc_o_c)
+
+$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := -mabi=32
+$(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE
+	$(call if_changed_dep,cpp_lds_S)
+
+$(obj)/vdso-o32.so.dbg: $(obj)/vdso-o32.lds $(obj-vdso-o32) FORCE
+	$(call if_changed,vdsold)
+
+$(obj)/vdso-o32-image.c: VDSO_NAME := o32
+$(obj)/vdso-o32-image.c: $(obj)/vdso-o32.so.dbg $(obj)/genvdso FORCE
+	$(call if_changed,genvdso)
+
+obj-y += vdso-o32-image.o
+
+endif
+
+#
+# Build N32 VDSO.
+#
+
+targets += $(obj-vdso-y:%.o=%-n32.o)
+targets += vdso-n32.lds vdso-n32.so.dbg vdso-n32.so vdso-n32-image.c
+
+ifdef CONFIG_MIPS32_N32
+
+obj-vdso-n32 := $(obj-vdso-y:%.o=$(obj)/%-n32.o)
+
+$(obj-vdso-n32): KBUILD_CFLAGS := $(cflags-vdso) -mabi=n32
+$(obj-vdso-n32): KBUILD_AFLAGS := $(aflags-vdso) -mabi=n32
+
+$(obj)/%-n32.o: $(src)/%.S FORCE
+	$(call if_changed_dep,as_o_S)
+
+$(obj)/%-n32.o: $(src)/%.c FORCE
+	$(call cmd,force_checksrc)
+	$(call if_changed_rule,cc_o_c)
+
+$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := -mabi=n32
+$(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE
+	$(call if_changed_dep,cpp_lds_S)
+
+$(obj)/vdso-n32.so.dbg: $(obj)/vdso-n32.lds $(obj-vdso-n32) FORCE
+	$(call if_changed,vdsold)
+
+$(obj)/vdso-n32-image.c: VDSO_NAME := n32
+$(obj)/vdso-n32-image.c: $(obj)/vdso-n32.so.dbg $(obj)/genvdso FORCE
+	$(call if_changed,genvdso)
+
+obj-y += vdso-n32-image.o
+
+endif
+
+# FIXME: Need install rule for debug.
+# Needs to deal with dependency for generation of dbg by cmd_genvdso...
diff --git a/arch/mips/vdso/elf.S b/arch/mips/vdso/elf.S
new file mode 100644
index 000000000000..be37bbb1f061
--- /dev/null
+++ b/arch/mips/vdso/elf.S
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <linux/elfnote.h>
+#include <linux/version.h>
+
+ELFNOTE_START(Linux, 0, "a")
+	.long LINUX_VERSION_CODE
+ELFNOTE_END
+
+/*
+ * The .MIPS.abiflags section must be defined with the FP ABI flags set
+ * to 'any' to be able to link with both old and new libraries.
+ * Newer toolchains are capable of automatically generating this, but we want
+ * to work with older toolchains as well. Therefore, we define the contents of
+ * this section here (under different names), and then genvdso will patch
+ * it to have the correct name and type.
+ *
+ * We base the .MIPS.abiflags section on preprocessor definitions rather than
+ * CONFIG_* because we need to match the particular ABI we are building the
+ * VDSO for.
+ *
+ * See https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking
+ * for the .MIPS.abiflags section description.
+ */
+
+	.section .mips_abiflags, "a"
+	.align 3
+__mips_abiflags:
+	.hword	0		/* version */
+	.byte	__mips		/* isa_level */
+
+	/* isa_rev */
+#ifdef __mips_isa_rev
+	.byte	__mips_isa_rev
+#else
+	.byte	0
+#endif
+
+	/* gpr_size */
+#ifdef __mips64
+	.byte	2		/* AFL_REG_64 */
+#else
+	.byte	1		/* AFL_REG_32 */
+#endif
+
+	/* cpr1_size */
+#if (defined(__mips_isa_rev) && __mips_isa_rev >= 6) || defined(__mips64)
+	.byte	2		/* AFL_REG_64 */
+#else
+	.byte	1		/* AFL_REG_32 */
+#endif
+
+	.byte	0		/* cpr2_size (AFL_REG_NONE) */
+	.byte	0		/* fp_abi (Val_GNU_MIPS_ABI_FP_ANY) */
+	.word	0		/* isa_ext */
+	.word	0		/* ases */
+	.word	0		/* flags1 */
+	.word	0		/* flags2 */
diff --git a/arch/mips/vdso/genvdso.c b/arch/mips/vdso/genvdso.c
new file mode 100644
index 000000000000..530a36f465ce
--- /dev/null
+++ b/arch/mips/vdso/genvdso.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * This tool is used to generate the real VDSO images from the raw image. It
+ * first patches up the MIPS ABI flags and GNU attributes sections defined in
+ * elf.S to have the correct name and type. It then generates a C source file
+ * to be compiled into the kernel containing the VDSO image data and a
+ * mips_vdso_image struct for it, including symbol offsets extracted from the
+ * image.
+ *
+ * We need to be passed both a stripped and unstripped VDSO image. The stripped
+ * image is compiled into the kernel, but we must also patch up the unstripped
+ * image's ABI flags sections so that it can be installed and used for
+ * debugging.
+ */
+
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+
+#include <byteswap.h>
+#include <elf.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+/* Define these in case the system elf.h is not new enough to have them. */
+#ifndef SHT_GNU_ATTRIBUTES
+# define SHT_GNU_ATTRIBUTES	0x6ffffff5
+#endif
+#ifndef SHT_MIPS_ABIFLAGS
+# define SHT_MIPS_ABIFLAGS	0x7000002a
+#endif
+
+enum {
+	ABI_O32 = (1 << 0),
+	ABI_N32 = (1 << 1),
+	ABI_N64 = (1 << 2),
+
+	ABI_ALL = ABI_O32 | ABI_N32 | ABI_N64,
+};
+
+/* Symbols the kernel requires offsets for. */
+static struct {
+	const char *name;
+	const char *offset_name;
+	unsigned int abis;
+} vdso_symbols[] = {
+	{ "__vdso_sigreturn", "off_sigreturn", ABI_O32 },
+	{ "__vdso_rt_sigreturn", "off_rt_sigreturn", ABI_ALL },
+	{}
+};
+
+static const char *program_name;
+static const char *vdso_name;
+static unsigned char elf_class;
+static unsigned int elf_abi;
+static bool need_swap;
+static FILE *out_file;
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+# define HOST_ORDER		ELFDATA2LSB
+#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+# define HOST_ORDER		ELFDATA2MSB
+#endif
+
+#define BUILD_SWAP(bits)						\
+	static uint##bits##_t swap_uint##bits(uint##bits##_t val)	\
+	{								\
+		return need_swap ? bswap_##bits(val) : val;		\
+	}
+
+BUILD_SWAP(16)
+BUILD_SWAP(32)
+BUILD_SWAP(64)
+
+#define __FUNC(name, bits) name##bits
+#define _FUNC(name, bits) __FUNC(name, bits)
+#define FUNC(name) _FUNC(name, ELF_BITS)
+
+#define __ELF(x, bits) Elf##bits##_##x
+#define _ELF(x, bits) __ELF(x, bits)
+#define ELF(x) _ELF(x, ELF_BITS)
+
+/*
+ * Include genvdso.h twice with ELF_BITS defined differently to get functions
+ * for both ELF32 and ELF64.
+ */
+
+#define ELF_BITS 64
+#include "genvdso.h"
+#undef ELF_BITS
+
+#define ELF_BITS 32
+#include "genvdso.h"
+#undef ELF_BITS
+
+static void *map_vdso(const char *path, size_t *_size)
+{
+	int fd;
+	struct stat stat;
+	void *addr;
+	const Elf32_Ehdr *ehdr;
+
+	fd = open(path, O_RDWR);
+	if (fd < 0) {
+		fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name,
+			path, strerror(errno));
+		return NULL;
+	}
+
+	if (fstat(fd, &stat) != 0) {
+		fprintf(stderr, "%s: Failed to stat '%s': %s\n", program_name,
+			path, strerror(errno));
+		return NULL;
+	}
+
+	addr = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd,
+		    0);
+	if (addr == MAP_FAILED) {
+		fprintf(stderr, "%s: Failed to map '%s': %s\n", program_name,
+			path, strerror(errno));
+		return NULL;
+	}
+
+	/* ELF32/64 header formats are the same for the bits we're checking. */
+	ehdr = addr;
+
+	if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0) {
+		fprintf(stderr, "%s: '%s' is not an ELF file\n", program_name,
+			path);
+		return NULL;
+	}
+
+	elf_class = ehdr->e_ident[EI_CLASS];
+	switch (elf_class) {
+	case ELFCLASS32:
+	case ELFCLASS64:
+		break;
+	default:
+		fprintf(stderr, "%s: '%s' has invalid ELF class\n",
+			program_name, path);
+		return NULL;
+	}
+
+	switch (ehdr->e_ident[EI_DATA]) {
+	case ELFDATA2LSB:
+	case ELFDATA2MSB:
+		need_swap = ehdr->e_ident[EI_DATA] != HOST_ORDER;
+		break;
+	default:
+		fprintf(stderr, "%s: '%s' has invalid ELF data order\n",
+			program_name, path);
+		return NULL;
+	}
+
+	if (swap_uint16(ehdr->e_machine) != EM_MIPS) {
+		fprintf(stderr,
+			"%s: '%s' has invalid ELF machine (expected EM_MIPS)\n",
+			program_name, path);
+		return NULL;
+	} else if (swap_uint16(ehdr->e_type) != ET_DYN) {
+		fprintf(stderr,
+			"%s: '%s' has invalid ELF type (expected ET_DYN)\n",
+			program_name, path);
+		return NULL;
+	}
+
+	*_size = stat.st_size;
+	return addr;
+}
+
+static bool patch_vdso(const char *path, void *vdso)
+{
+	if (elf_class == ELFCLASS64)
+		return patch_vdso64(path, vdso);
+	else
+		return patch_vdso32(path, vdso);
+}
+
+static bool get_symbols(const char *path, void *vdso)
+{
+	if (elf_class == ELFCLASS64)
+		return get_symbols64(path, vdso);
+	else
+		return get_symbols32(path, vdso);
+}
+
+int main(int argc, char **argv)
+{
+	const char *dbg_vdso_path, *vdso_path, *out_path;
+	void *dbg_vdso, *vdso;
+	size_t dbg_vdso_size, vdso_size, i;
+
+	program_name = argv[0];
+
+	if (argc < 4 || argc > 5) {
+		fprintf(stderr,
+			"Usage: %s <debug VDSO> <stripped VDSO> <output file> [<name>]\n",
+			program_name);
+		return EXIT_FAILURE;
+	}
+
+	dbg_vdso_path = argv[1];
+	vdso_path = argv[2];
+	out_path = argv[3];
+	vdso_name = (argc > 4) ? argv[4] : "";
+
+	dbg_vdso = map_vdso(dbg_vdso_path, &dbg_vdso_size);
+	if (!dbg_vdso)
+		return EXIT_FAILURE;
+
+	vdso = map_vdso(vdso_path, &vdso_size);
+	if (!vdso)
+		return EXIT_FAILURE;
+
+	/* Patch both the VDSOs' ABI flags sections. */
+	if (!patch_vdso(dbg_vdso_path, dbg_vdso))
+		return EXIT_FAILURE;
+	if (!patch_vdso(vdso_path, vdso))
+		return EXIT_FAILURE;
+
+	if (msync(dbg_vdso, dbg_vdso_size, MS_SYNC) != 0) {
+		fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name,
+			dbg_vdso_path, strerror(errno));
+		return EXIT_FAILURE;
+	} else if (msync(vdso, vdso_size, MS_SYNC) != 0) {
+		fprintf(stderr, "%s: Failed to sync '%s': %s\n", program_name,
+			vdso_path, strerror(errno));
+		return EXIT_FAILURE;
+	}
+
+	out_file = fopen(out_path, "w");
+	if (!out_file) {
+		fprintf(stderr, "%s: Failed to open '%s': %s\n", program_name,
+			out_path, strerror(errno));
+		return EXIT_FAILURE;
+	}
+
+	fprintf(out_file, "/* Automatically generated - do not edit */\n");
+	fprintf(out_file, "#include <linux/linkage.h>\n");
+	fprintf(out_file, "#include <linux/mm.h>\n");
+	fprintf(out_file, "#include <asm/vdso.h>\n");
+
+	/* Write out the stripped VDSO data. */
+	fprintf(out_file,
+		"static unsigned char vdso_data[PAGE_ALIGN(%zu)] __page_aligned_data = {\n\t",
+		vdso_size);
+	for (i = 0; i < vdso_size; i++) {
+		if (!(i % 10))
+			fprintf(out_file, "\n\t");
+		fprintf(out_file, "0x%02x, ", ((unsigned char *)vdso)[i]);
+	}
+	fprintf(out_file, "\n};\n");
+
+	/* Preallocate a page array. */
+	fprintf(out_file,
+		"static struct page *vdso_pages[PAGE_ALIGN(%zu) / PAGE_SIZE];\n",
+		vdso_size);
+
+	fprintf(out_file, "struct mips_vdso_image vdso_image%s%s = {\n",
+		(vdso_name[0]) ? "_" : "", vdso_name);
+	fprintf(out_file, "\t.data = vdso_data,\n");
+	fprintf(out_file, "\t.size = PAGE_ALIGN(%zu),\n", vdso_size);
+	fprintf(out_file, "\t.mapping = {\n");
+	fprintf(out_file, "\t\t.name = \"[vdso]\",\n");
+	fprintf(out_file, "\t\t.pages = vdso_pages,\n");
+	fprintf(out_file, "\t},\n");
+
+	/* Calculate and write symbol offsets to <output file> */
+	if (!get_symbols(dbg_vdso_path, dbg_vdso)) {
+		unlink(out_path);
+		return EXIT_FAILURE;
+	}
+
+	fprintf(out_file, "};\n");
+
+	return EXIT_SUCCESS;
+}
diff --git a/arch/mips/vdso/genvdso.h b/arch/mips/vdso/genvdso.h
new file mode 100644
index 000000000000..94334727059a
--- /dev/null
+++ b/arch/mips/vdso/genvdso.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+static inline bool FUNC(patch_vdso)(const char *path, void *vdso)
+{
+	const ELF(Ehdr) *ehdr = vdso;
+	void *shdrs;
+	ELF(Shdr) *shdr;
+	char *shstrtab, *name;
+	uint16_t sh_count, sh_entsize, i;
+	unsigned int local_gotno, symtabno, gotsym;
+	ELF(Dyn) *dyn = NULL;
+
+	shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff);
+	sh_count = swap_uint16(ehdr->e_shnum);
+	sh_entsize = swap_uint16(ehdr->e_shentsize);
+
+	shdr = shdrs + (sh_entsize * swap_uint16(ehdr->e_shstrndx));
+	shstrtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+
+	for (i = 0; i < sh_count; i++) {
+		shdr = shdrs + (i * sh_entsize);
+		name = shstrtab + swap_uint32(shdr->sh_name);
+
+		/*
+		 * Ensure there are no relocation sections - ld.so does not
+		 * relocate the VDSO so if there are relocations things will
+		 * break.
+		 */
+		switch (swap_uint32(shdr->sh_type)) {
+		case SHT_REL:
+		case SHT_RELA:
+			fprintf(stderr,
+				"%s: '%s' contains relocation sections\n",
+				program_name, path);
+			return false;
+		case SHT_DYNAMIC:
+			dyn = vdso + FUNC(swap_uint)(shdr->sh_offset);
+			break;
+		}
+
+		/* Check for existing sections. */
+		if (strcmp(name, ".MIPS.abiflags") == 0) {
+			fprintf(stderr,
+				"%s: '%s' already contains a '.MIPS.abiflags' section\n",
+				program_name, path);
+			return false;
+		}
+
+		if (strcmp(name, ".mips_abiflags") == 0) {
+			strcpy(name, ".MIPS.abiflags");
+			shdr->sh_type = swap_uint32(SHT_MIPS_ABIFLAGS);
+			shdr->sh_entsize = shdr->sh_size;
+		}
+	}
+
+	/*
+	 * Ensure the GOT has no entries other than the standard 2, for the same
+	 * reason we check that there's no relocation sections above.
+	 * The standard two entries are:
+	 * - Lazy resolver
+	 * - Module pointer
+	 */
+	if (dyn) {
+		local_gotno = symtabno = gotsym = 0;
+
+		while (FUNC(swap_uint)(dyn->d_tag) != DT_NULL) {
+			switch (FUNC(swap_uint)(dyn->d_tag)) {
+			/*
+			 * This member holds the number of local GOT entries.
+			 */
+			case DT_MIPS_LOCAL_GOTNO:
+				local_gotno = FUNC(swap_uint)(dyn->d_un.d_val);
+				break;
+			/*
+			 * This member holds the number of entries in the
+			 * .dynsym section.
+			 */
+			case DT_MIPS_SYMTABNO:
+				symtabno = FUNC(swap_uint)(dyn->d_un.d_val);
+				break;
+			/*
+			 * This member holds the index of the first dynamic
+			 * symbol table entry that corresponds to an entry in
+			 * the GOT.
+			 */
+			case DT_MIPS_GOTSYM:
+				gotsym = FUNC(swap_uint)(dyn->d_un.d_val);
+				break;
+			}
+
+			dyn++;
+		}
+
+		if (local_gotno > 2 || symtabno - gotsym) {
+			fprintf(stderr,
+				"%s: '%s' contains unexpected GOT entries\n",
+				program_name, path);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static inline bool FUNC(get_symbols)(const char *path, void *vdso)
+{
+	const ELF(Ehdr) *ehdr = vdso;
+	void *shdrs, *symtab;
+	ELF(Shdr) *shdr;
+	const ELF(Sym) *sym;
+	char *strtab, *name;
+	uint16_t sh_count, sh_entsize, st_count, st_entsize, i, j;
+	uint64_t offset;
+	uint32_t flags;
+
+	shdrs = vdso + FUNC(swap_uint)(ehdr->e_shoff);
+	sh_count = swap_uint16(ehdr->e_shnum);
+	sh_entsize = swap_uint16(ehdr->e_shentsize);
+
+	for (i = 0; i < sh_count; i++) {
+		shdr = shdrs + (i * sh_entsize);
+
+		if (swap_uint32(shdr->sh_type) == SHT_SYMTAB)
+			break;
+	}
+
+	if (i == sh_count) {
+		fprintf(stderr, "%s: '%s' has no symbol table\n", program_name,
+			path);
+		return false;
+	}
+
+	/* Get flags */
+	flags = swap_uint32(ehdr->e_flags);
+	if (elf_class == ELFCLASS64)
+		elf_abi = ABI_N64;
+	else if (flags & EF_MIPS_ABI2)
+		elf_abi = ABI_N32;
+	else
+		elf_abi = ABI_O32;
+
+	/* Get symbol table. */
+	symtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+	st_entsize = FUNC(swap_uint)(shdr->sh_entsize);
+	st_count = FUNC(swap_uint)(shdr->sh_size) / st_entsize;
+
+	/* Get string table. */
+	shdr = shdrs + (swap_uint32(shdr->sh_link) * sh_entsize);
+	strtab = vdso + FUNC(swap_uint)(shdr->sh_offset);
+
+	/* Write offsets for symbols needed by the kernel. */
+	for (i = 0; vdso_symbols[i].name; i++) {
+		if (!(vdso_symbols[i].abis & elf_abi))
+			continue;
+
+		for (j = 0; j < st_count; j++) {
+			sym = symtab + (j * st_entsize);
+			name = strtab + swap_uint32(sym->st_name);
+
+			if (!strcmp(name, vdso_symbols[i].name)) {
+				offset = FUNC(swap_uint)(sym->st_value);
+
+				fprintf(out_file,
+					"\t.%s = 0x%" PRIx64 ",\n",
+					vdso_symbols[i].offset_name, offset);
+				break;
+			}
+		}
+
+		if (j == st_count) {
+			fprintf(stderr,
+				"%s: '%s' is missing required symbol '%s'\n",
+				program_name, path, vdso_symbols[i].name);
+			return false;
+		}
+	}
+
+	return true;
+}
diff --git a/arch/mips/vdso/gettimeofday.c b/arch/mips/vdso/gettimeofday.c
new file mode 100644
index 000000000000..ce89c9e294f9
--- /dev/null
+++ b/arch/mips/vdso/gettimeofday.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <linux/compiler.h>
+#include <linux/irqchip/mips-gic.h>
+#include <linux/time.h>
+
+#include <asm/clocksource.h>
+#include <asm/io.h>
+#include <asm/mips-cm.h>
+#include <asm/unistd.h>
+#include <asm/vdso.h>
+
+static __always_inline int do_realtime_coarse(struct timespec *ts,
+					      const union mips_vdso_data *data)
+{
+	u32 start_seq;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		ts->tv_sec = data->xtime_sec;
+		ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
+	} while (vdso_data_read_retry(data, start_seq));
+
+	return 0;
+}
+
+static __always_inline int do_monotonic_coarse(struct timespec *ts,
+					       const union mips_vdso_data *data)
+{
+	u32 start_seq;
+	u32 to_mono_sec;
+	u32 to_mono_nsec;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		ts->tv_sec = data->xtime_sec;
+		ts->tv_nsec = data->xtime_nsec >> data->cs_shift;
+
+		to_mono_sec = data->wall_to_mono_sec;
+		to_mono_nsec = data->wall_to_mono_nsec;
+	} while (vdso_data_read_retry(data, start_seq));
+
+	ts->tv_sec += to_mono_sec;
+	timespec_add_ns(ts, to_mono_nsec);
+
+	return 0;
+}
+
+#ifdef CONFIG_CSRC_R4K
+
+static __always_inline u64 read_r4k_count(void)
+{
+	unsigned int count;
+
+	__asm__ __volatile__(
+	"	.set push\n"
+	"	.set mips32r2\n"
+	"	rdhwr	%0, $2\n"
+	"	.set pop\n"
+	: "=r" (count));
+
+	return count;
+}
+
+#endif
+
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+
+static __always_inline u64 read_gic_count(const union mips_vdso_data *data)
+{
+	void __iomem *gic = get_gic(data);
+	u32 hi, hi2, lo;
+
+	do {
+		hi = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS);
+		lo = __raw_readl(gic + GIC_UMV_SH_COUNTER_31_00_OFS);
+		hi2 = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS);
+	} while (hi2 != hi);
+
+	return (((u64)hi) << 32) + lo;
+}
+
+#endif
+
+static __always_inline u64 get_ns(const union mips_vdso_data *data)
+{
+	u64 cycle_now, delta, nsec;
+
+	switch (data->clock_mode) {
+#ifdef CONFIG_CSRC_R4K
+	case VDSO_CLOCK_R4K:
+		cycle_now = read_r4k_count();
+		break;
+#endif
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+	case VDSO_CLOCK_GIC:
+		cycle_now = read_gic_count(data);
+		break;
+#endif
+	default:
+		return 0;
+	}
+
+	delta = (cycle_now - data->cs_cycle_last) & data->cs_mask;
+
+	nsec = (delta * data->cs_mult) + data->xtime_nsec;
+	nsec >>= data->cs_shift;
+
+	return nsec;
+}
+
+static __always_inline int do_realtime(struct timespec *ts,
+				       const union mips_vdso_data *data)
+{
+	u32 start_seq;
+	u64 ns;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		if (data->clock_mode == VDSO_CLOCK_NONE)
+			return -ENOSYS;
+
+		ts->tv_sec = data->xtime_sec;
+		ns = get_ns(data);
+	} while (vdso_data_read_retry(data, start_seq));
+
+	ts->tv_nsec = 0;
+	timespec_add_ns(ts, ns);
+
+	return 0;
+}
+
+static __always_inline int do_monotonic(struct timespec *ts,
+					const union mips_vdso_data *data)
+{
+	u32 start_seq;
+	u64 ns;
+	u32 to_mono_sec;
+	u32 to_mono_nsec;
+
+	do {
+		start_seq = vdso_data_read_begin(data);
+
+		if (data->clock_mode == VDSO_CLOCK_NONE)
+			return -ENOSYS;
+
+		ts->tv_sec = data->xtime_sec;
+		ns = get_ns(data);
+
+		to_mono_sec = data->wall_to_mono_sec;
+		to_mono_nsec = data->wall_to_mono_nsec;
+	} while (vdso_data_read_retry(data, start_seq));
+
+	ts->tv_sec += to_mono_sec;
+	ts->tv_nsec = 0;
+	timespec_add_ns(ts, ns + to_mono_nsec);
+
+	return 0;
+}
+
+#ifdef CONFIG_MIPS_CLOCK_VSYSCALL
+
+/*
+ * This is behind the ifdef so that we don't provide the symbol when there's no
+ * possibility of there being a usable clocksource, because there's nothing we
+ * can do without it. When libc fails the symbol lookup it should fall back on
+ * the standard syscall path.
+ */
+int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
+{
+	const union mips_vdso_data *data = get_vdso_data();
+	struct timespec ts;
+	int ret;
+
+	ret = do_realtime(&ts, data);
+	if (ret)
+		return ret;
+
+	if (tv) {
+		tv->tv_sec = ts.tv_sec;
+		tv->tv_usec = ts.tv_nsec / 1000;
+	}
+
+	if (tz) {
+		tz->tz_minuteswest = data->tz_minuteswest;
+		tz->tz_dsttime = data->tz_dsttime;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_CLKSRC_MIPS_GIC */
+
+int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts)
+{
+	const union mips_vdso_data *data = get_vdso_data();
+	int ret;
+
+	switch (clkid) {
+	case CLOCK_REALTIME_COARSE:
+		ret = do_realtime_coarse(ts, data);
+		break;
+	case CLOCK_MONOTONIC_COARSE:
+		ret = do_monotonic_coarse(ts, data);
+		break;
+	case CLOCK_REALTIME:
+		ret = do_realtime(ts, data);
+		break;
+	case CLOCK_MONOTONIC:
+		ret = do_monotonic(ts, data);
+		break;
+	default:
+		ret = -ENOSYS;
+		break;
+	}
+
+	/* If we return -ENOSYS libc should fall back to a syscall. */
+	return ret;
+}
diff --git a/arch/mips/vdso/sigreturn.S b/arch/mips/vdso/sigreturn.S
new file mode 100644
index 000000000000..715bf5993529
--- /dev/null
+++ b/arch/mips/vdso/sigreturn.S
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "vdso.h"
+
+#include <uapi/asm/unistd.h>
+
+#include <asm/regdef.h>
+#include <asm/asm.h>
+
+	.section	.text
+	.cfi_sections	.debug_frame
+
+LEAF(__vdso_rt_sigreturn)
+	.cfi_startproc
+	.frame	sp, 0, ra
+	.mask	0x00000000, 0
+	.fmask	0x00000000, 0
+	.cfi_signal_frame
+
+	li	v0, __NR_rt_sigreturn
+	syscall
+
+	.cfi_endproc
+	END(__vdso_rt_sigreturn)
+
+#if _MIPS_SIM == _MIPS_SIM_ABI32
+
+LEAF(__vdso_sigreturn)
+	.cfi_startproc
+	.frame	sp, 0, ra
+	.mask	0x00000000, 0
+	.fmask	0x00000000, 0
+	.cfi_signal_frame
+
+	li	v0, __NR_sigreturn
+	syscall
+
+	.cfi_endproc
+	END(__vdso_sigreturn)
+
+#endif
diff --git a/arch/mips/vdso/vdso.h b/arch/mips/vdso/vdso.h
new file mode 100644
index 000000000000..cfb1be441dec
--- /dev/null
+++ b/arch/mips/vdso/vdso.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM != _MIPS_SIM_ABI64 && defined(CONFIG_64BIT)
+
+/* Building 32-bit VDSO for the 64-bit kernel. Fake a 32-bit Kconfig. */
+#undef CONFIG_64BIT
+#define CONFIG_32BIT 1
+#ifndef __ASSEMBLY__
+#include <asm-generic/atomic64.h>
+#endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/asm.h>
+#include <asm/page.h>
+#include <asm/vdso.h>
+
+static inline unsigned long get_vdso_base(void)
+{
+	unsigned long addr;
+
+	/*
+	 * We can't use cpu_has_mips_r6 since it needs the cpu_data[]
+	 * kernel symbol.
+	 */
+#ifdef CONFIG_CPU_MIPSR6
+	/*
+	 * lapc <symbol> is an alias to addiupc reg, <symbol> - .
+	 *
+	 * We can't use addiupc because there is no label-label
+	 * support for the addiupc reloc
+	 */
+	__asm__("lapc	%0, _start			\n"
+		: "=r" (addr) : :);
+#else
+	/*
+	 * Get the base load address of the VDSO. We have to avoid generating
+	 * relocations and references to the GOT because ld.so does not peform
+	 * relocations on the VDSO. We use the current offset from the VDSO base
+	 * and perform a PC-relative branch which gives the absolute address in
+	 * ra, and take the difference. The assembler chokes on
+	 * "li %0, _start - .", so embed the offset as a word and branch over
+	 * it.
+	 *
+	 */
+
+	__asm__(
+	"	.set push				\n"
+	"	.set noreorder				\n"
+	"	bal	1f				\n"
+	"	 nop					\n"
+	"	.word	_start - .			\n"
+	"1:	lw	%0, 0($31)			\n"
+	"	" STR(PTR_ADDU) " %0, $31, %0		\n"
+	"	.set pop				\n"
+	: "=r" (addr)
+	:
+	: "$31");
+#endif /* CONFIG_CPU_MIPSR6 */
+
+	return addr;
+}
+
+static inline const union mips_vdso_data *get_vdso_data(void)
+{
+	return (const union mips_vdso_data *)(get_vdso_base() - PAGE_SIZE);
+}
+
+#ifdef CONFIG_CLKSRC_MIPS_GIC
+
+static inline void __iomem *get_gic(const union mips_vdso_data *data)
+{
+	return (void __iomem *)data - PAGE_SIZE;
+}
+
+#endif /* CONFIG_CLKSRC_MIPS_GIC */
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/mips/vdso/vdso.lds.S b/arch/mips/vdso/vdso.lds.S
new file mode 100644
index 000000000000..8df7dd53e8e0
--- /dev/null
+++ b/arch/mips/vdso/vdso.lds.S
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Alex Smith <alex.smith@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/sgidefs.h>
+
+#if _MIPS_SIM == _MIPS_SIM_ABI64
+OUTPUT_FORMAT("elf64-tradlittlemips", "elf64-tradbigmips", "elf64-tradlittlemips")
+#elif _MIPS_SIM == _MIPS_SIM_NABI32
+OUTPUT_FORMAT("elf32-ntradlittlemips", "elf32-ntradbigmips", "elf32-ntradlittlemips")
+#else
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradbigmips", "elf32-tradlittlemips")
+#endif
+
+OUTPUT_ARCH(mips)
+
+SECTIONS
+{
+	PROVIDE(_start = .);
+	. = SIZEOF_HEADERS;
+
+	/*
+	 * In order to retain compatibility with older toolchains we provide the
+	 * ABI flags section ourself. Newer assemblers will automatically
+	 * generate .MIPS.abiflags sections so we discard such input sections,
+	 * and then manually define our own section here. genvdso will patch
+	 * this section to have the correct name/type.
+	 */
+	.mips_abiflags	: { *(.mips_abiflags) } 	:text :abiflags
+
+	.reginfo	: { *(.reginfo) }		:text :reginfo
+
+	.hash		: { *(.hash) }			:text
+	.gnu.hash	: { *(.gnu.hash) }
+	.dynsym		: { *(.dynsym) }
+	.dynstr		: { *(.dynstr) }
+	.gnu.version	: { *(.gnu.version) }
+	.gnu.version_d	: { *(.gnu.version_d) }
+	.gnu.version_r	: { *(.gnu.version_r) }
+
+	.note		: { *(.note.*) }		:text :note
+
+	.text		: { *(.text*) }			:text
+	PROVIDE (__etext = .);
+	PROVIDE (_etext = .);
+	PROVIDE (etext = .);
+
+	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text :eh_frame_hdr
+	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
+
+	.dynamic	: { *(.dynamic) }		:text :dynamic
+
+	.rodata		: { *(.rodata*) }		:text
+
+	_end = .;
+	PROVIDE(end = .);
+
+	/DISCARD/	: {
+		*(.MIPS.abiflags)
+		*(.gnu.attributes)
+		*(.note.GNU-stack)
+		*(.data .data.* .gnu.linkonce.d.* .sdata*)
+		*(.bss .sbss .dynbss .dynsbss)
+	}
+}
+
+PHDRS
+{
+	/*
+	 * Provide a PT_MIPS_ABIFLAGS header to assign the ABI flags section
+	 * to. We can specify the header type directly here so no modification
+	 * is needed later on.
+	 */
+	abiflags	0x70000003;
+
+	/*
+	 * The ABI flags header must exist directly after the PT_INTERP header,
+	 * so we must explicitly place the PT_MIPS_REGINFO header after it to
+	 * stop the linker putting one in at the start.
+	 */
+	reginfo		0x70000000;
+
+	text		PT_LOAD		FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
+	dynamic		PT_DYNAMIC	FLAGS(4);		/* PF_R */
+	note		PT_NOTE		FLAGS(4);		/* PF_R */
+	eh_frame_hdr	PT_GNU_EH_FRAME;
+}
+
+VERSION
+{
+	LINUX_2.6 {
+#ifndef DISABLE_MIPS_VDSO
+	global:
+		__vdso_clock_gettime;
+		__vdso_gettimeofday;
+#endif
+	local: *;
+	};
+}
diff --git a/arch/mips/xilfpga/Kconfig b/arch/mips/xilfpga/Kconfig
new file mode 100644
index 000000000000..42a030a0edba
--- /dev/null
+++ b/arch/mips/xilfpga/Kconfig
@@ -0,0 +1,9 @@
+choice
+	prompt "Machine type"
+	depends on MACH_XILFPGA
+	default XILFPGA_NEXYS4DDR
+
+config XILFPGA_NEXYS4DDR
+	bool "Nexys4DDR by Digilent"
+
+endchoice
diff --git a/arch/mips/xilfpga/Makefile b/arch/mips/xilfpga/Makefile
new file mode 100644
index 000000000000..a4deec6fadbc
--- /dev/null
+++ b/arch/mips/xilfpga/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Xilfpga
+#
+
+obj-y +=	init.o
+obj-y +=	intc.o
+obj-y +=	time.o
diff --git a/arch/mips/xilfpga/Platform b/arch/mips/xilfpga/Platform
new file mode 100644
index 000000000000..ed375afe3d39
--- /dev/null
+++ b/arch/mips/xilfpga/Platform
@@ -0,0 +1,3 @@
+platform-$(CONFIG_MACH_XILFPGA) += xilfpga/
+cflags-$(CONFIG_MACH_XILFPGA) += -I$(srctree)/arch/mips/include/asm/mach-xilfpga
+load-$(CONFIG_MACH_XILFPGA) += 0xffffffff80100000
diff --git a/arch/mips/xilfpga/init.c b/arch/mips/xilfpga/init.c
new file mode 100644
index 000000000000..ce2aee2169ac
--- /dev/null
+++ b/arch/mips/xilfpga/init.c
@@ -0,0 +1,57 @@
+/*
+ * Xilfpga platform setup
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/prom.h>
+
+#define XILFPGA_UART_BASE	0xb0401000
+
+const char *get_system_type(void)
+{
+	return "MIPSfpga";
+}
+
+void __init plat_mem_setup(void)
+{
+	__dt_setup_arch(__dtb_start);
+	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+}
+
+void __init prom_init(void)
+{
+	setup_8250_early_printk_port(XILFPGA_UART_BASE, 2, 50000);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init device_tree_init(void)
+{
+	if (!initial_boot_params)
+		return;
+
+	unflatten_and_copy_device_tree();
+}
+
+static int __init plat_of_setup(void)
+{
+	if (!of_have_populated_dt())
+		panic("Device tree not present");
+
+	if (of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL))
+		panic("Failed to populate DT");
+
+	return 0;
+}
+arch_initcall(plat_of_setup);
diff --git a/arch/mips/xilfpga/intc.c b/arch/mips/xilfpga/intc.c
new file mode 100644
index 000000000000..c4d1a716b347
--- /dev/null
+++ b/arch/mips/xilfpga/intc.c
@@ -0,0 +1,25 @@
+/*
+ * Xilfpga interrupt controller setup
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include <asm/irq_cpu.h>
+
+static struct of_device_id of_irq_ids[] __initdata = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}
diff --git a/arch/mips/xilfpga/time.c b/arch/mips/xilfpga/time.c
new file mode 100644
index 000000000000..cbb3fca7b6fa
--- /dev/null
+++ b/arch/mips/xilfpga/time.c
@@ -0,0 +1,41 @@
+/*
+ * Xilfpga clocksource/timer setup
+ *
+ * Copyright (C) 2015 Imagination Technologies
+ * Author: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/of.h>
+
+#include <asm/time.h>
+
+void __init plat_time_init(void)
+{
+	struct device_node *np;
+	struct clk *clk;
+
+	of_clk_init(NULL);
+	clocksource_probe();
+
+	np = of_get_cpu_node(0, NULL);
+	if (!np) {
+		pr_err("Failed to get CPU node\n");
+		return;
+	}
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		pr_err("Failed to get CPU clock: %ld\n", PTR_ERR(clk));
+		return;
+	}
+
+	mips_hpt_frequency = clk_get_rate(clk) / 2;
+	clk_put(clk);
+}
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 4434b54e1d87..06ddb5501ab1 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -1,6 +1,7 @@
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
+	select HAVE_UID16
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_ARCH_TRACEHOOK
@@ -13,6 +14,7 @@ config MN10300
 	select OLD_SIGSUSPEND3
 	select OLD_SIGACTION
 	select HAVE_DEBUG_STACKOVERFLOW
+	select ARCH_NO_COHERENT_DMA_MMAP
 
 config AM33_2
 	def_bool n
@@ -37,9 +39,6 @@ config HIGHMEM
 config NUMA
 	def_bool n
 
-config UID16
-	def_bool y
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -54,6 +53,7 @@ config GENERIC_HWEIGHT
 
 config GENERIC_BUG
 	def_bool y
+	depends on BUG
 
 config QUICKLIST
 	def_bool y
diff --git a/arch/mn10300/include/asm/checksum.h b/arch/mn10300/include/asm/checksum.h
index 9fb2a8d8826a..c80df5b504ac 100644
--- a/arch/mn10300/include/asm/checksum.h
+++ b/arch/mn10300/include/asm/checksum.h
@@ -37,16 +37,11 @@ static inline __sum16 csum_fold(__wsum sum)
 	return (~sum) >> 16;
 }
 
-static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
-					unsigned long daddr,
-					unsigned short len,
-					unsigned short proto,
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
-	__wsum tmp;
-
-	tmp = (__wsum) ntohs(len) << 16;
-	tmp += (__wsum) proto << 8;
+	__wsum tmp = (__wsum)((len + proto) << 8);
 
 	asm(
 		"	add	%1,%0		\n"
@@ -64,10 +59,8 @@ static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
  * computes the checksum of the TCP/UDP pseudo-header
  * returns a 16-bit checksum, already complemented
  */
-static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
-					unsigned long daddr,
-					unsigned short len,
-					unsigned short proto,
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h
index a18abfc558eb..1dcd44757f32 100644
--- a/arch/mn10300/include/asm/dma-mapping.h
+++ b/arch/mn10300/include/asm/dma-mapping.h
@@ -11,154 +11,14 @@
 #ifndef _ASM_DMA_MAPPING_H
 #define _ASM_DMA_MAPPING_H
 
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-
 #include <asm/cache.h>
 #include <asm/io.h>
 
-/*
- * See Documentation/DMA-API.txt for the description of how the
- * following DMA API should work.
- */
-
-extern void *dma_alloc_coherent(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, int flag);
-
-extern void dma_free_coherent(struct device *dev, size_t size,
-			      void *vaddr, dma_addr_t dma_handle);
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
-#define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
-
-static inline
-dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
-			  enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	mn10300_dcache_flush_inv();
-	return virt_to_bus(ptr);
-}
-
-static inline
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		      enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-static inline
-int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
-	       enum dma_data_direction direction)
-{
-	struct scatterlist *sg;
-	int i;
-
-	BUG_ON(!valid_dma_direction(direction));
-	WARN_ON(nents == 0 || sglist[0].length == 0);
-
-	for_each_sg(sglist, sg, nents, i) {
-		BUG_ON(!sg_page(sg));
-
-		sg->dma_address = sg_phys(sg);
-	}
+extern struct dma_map_ops mn10300_dma_ops;
 
-	mn10300_dcache_flush_inv();
-	return nents;
-}
-
-static inline
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-		  enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
-}
-
-static inline
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
-			unsigned long offset, size_t size,
-			enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-	return page_to_bus(page) + offset;
-}
-
-static inline
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-		    enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-}
-
-static inline
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			     size_t size, enum dma_data_direction direction)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-}
-
-static inline
-void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-				size_t size, enum dma_data_direction direction)
-{
-	mn10300_dcache_flush_inv();
-}
-
-static inline
-void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-				   unsigned long offset, size_t size,
-				   enum dma_data_direction direction)
-{
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
-{
-	mn10300_dcache_flush_inv();
-}
-
-
-static inline
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-			 int nelems, enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-			    int nelems, enum dma_data_direction direction)
-{
-	mn10300_dcache_flush_inv();
-}
-
-static inline
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
-}
-
-static inline
-int dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
-	 * guarantee allocations that must be within a tighter range than
-	 * GFP_DMA
-	 */
-	if (mask < 0x00ffffff)
-		return 0;
-	return 1;
-}
-
-static inline
-int dma_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-	return 0;
+	return &mn10300_dma_ops;
 }
 
 static inline
@@ -168,19 +28,4 @@ void dma_cache_sync(void *vaddr, size_t size,
 	mn10300_dcache_flush_inv();
 }
 
-/* Not supported for now */
-static inline int dma_mmap_coherent(struct device *dev,
-				    struct vm_area_struct *vma, void *cpu_addr,
-				    dma_addr_t dma_addr, size_t size)
-{
-	return -EINVAL;
-}
-
-static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size)
-{
-	return -EINVAL;
-}
-
 #endif
diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h
index 8288e124165b..3810a6f740fd 100644
--- a/arch/mn10300/include/asm/page.h
+++ b/arch/mn10300/include/asm/page.h
@@ -107,6 +107,7 @@ static inline int get_order(unsigned long size)
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 #define pfn_to_page(pfn)	(mem_map + ((pfn) - __pfn_disp))
 #define page_to_pfn(page)	((unsigned long)((page) - mem_map) + __pfn_disp)
+#define __pfn_to_phys(pfn)	PFN_PHYS(pfn)
 
 #define pfn_valid(pfn)					\
 ({							\
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index be3debb8fc02..51159fff025a 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -80,9 +80,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 
 #endif /* __KERNEL__ */
 
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
 	return channel ? 15 : 14;
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
index c1990218f18c..594ebff15d3f 100644
--- a/arch/mn10300/include/asm/serial.h
+++ b/arch/mn10300/include/asm/serial.h
@@ -14,15 +14,15 @@
 
 /* Standard COM flags (except for COM4, because of the 8514 problem) */
 #ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#define STD_COM_FLAGS	(UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ)
+#define STD_COM4_FLAGS	(UPF_BOOT_AUTOCONF | UPF_AUTO_IRQ)
 #else
-#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS	ASYNC_BOOT_AUTOCONF
+#define STD_COM_FLAGS	(UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
+#define STD_COM4_FLAGS	UPF_BOOT_AUTOCONF
 #endif
 
 #ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define FOURPORT_FLAGS	ASYNC_FOURPORT
+#define FOURPORT_FLAGS	UPF_FOURPORT
 #define ACCENT_FLAGS	0
 #define BOCA_FLAGS	0
 #define HUB6_FLAGS	0
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 537278746a15..20f7bf6de384 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -110,21 +110,6 @@ extern int fixup_exception(struct pt_regs *regs);
 #define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
 #define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
 
-/*
- * The "xxx_ret" versions return constant specified in third argument, if
- * something bad happens. These macros can be optimized for the
- * case of just returning from the function xxx_ret is used.
- */
-
-#define put_user_ret(x, ptr, ret) \
-	({ if (put_user((x), (ptr)))	return (ret); })
-#define get_user_ret(x, ptr, ret) \
-	({ if (get_user((x), (ptr)))	return (ret); })
-#define __put_user_ret(x, ptr, ret) \
-	({ if (__put_user((x), (ptr)))	return (ret); })
-#define __get_user_ret(x, ptr, ret) \
-	({ if (__get_user((x), (ptr)))	return (ret); })
-
 struct __large_struct { unsigned long buf[100]; };
 #define __m(x) (*(struct __large_struct *)(x))
 
diff --git a/arch/mn10300/include/uapi/asm/socket.h b/arch/mn10300/include/uapi/asm/socket.h
index cab7d6d50051..5129f23a9ee1 100644
--- a/arch/mn10300/include/uapi/asm/socket.h
+++ b/arch/mn10300/include/uapi/asm/socket.h
@@ -85,4 +85,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/kernel/fpu-nofpu.c b/arch/mn10300/kernel/fpu-nofpu.c
index 31c765b92c5d..8d0e041aa798 100644
--- a/arch/mn10300/kernel/fpu-nofpu.c
+++ b/arch/mn10300/kernel/fpu-nofpu.c
@@ -9,6 +9,7 @@
  * 2 of the Licence, or (at your option) any later version.
  */
 #include <asm/fpu.h>
+#include <asm/elf.h>
 
 /*
  * handle an FPU operational exception
diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c
index f984193718b1..426173c4b0b9 100644
--- a/arch/mn10300/kernel/smp.c
+++ b/arch/mn10300/kernel/smp.c
@@ -675,7 +675,7 @@ int __init start_secondary(void *unused)
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
 	init_clockevents();
 #endif
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 	return 0;
 }
 
diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c
index e244ebe637e1..8842394cb49a 100644
--- a/arch/mn10300/mm/dma-alloc.c
+++ b/arch/mn10300/mm/dma-alloc.c
@@ -20,8 +20,8 @@
 
 static unsigned long pci_sram_allocated = 0xbc000000;
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			 dma_addr_t *dma_handle, int gfp)
+static void *mn10300_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
 {
 	unsigned long addr;
 	void *ret;
@@ -61,10 +61,9 @@ done:
 	printk("dma_alloc_coherent() = %p [%x]\n", ret, *dma_handle);
 	return ret;
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-		       dma_addr_t dma_handle)
+static void mn10300_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	unsigned long addr = (unsigned long) vaddr & ~0x20000000;
 
@@ -73,4 +72,60 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 
 	free_pages(addr, get_order(size));
 }
-EXPORT_SYMBOL(dma_free_coherent);
+
+static int mn10300_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sglist, sg, nents, i) {
+		BUG_ON(!sg_page(sg));
+
+		sg->dma_address = sg_phys(sg);
+	}
+
+	mn10300_dcache_flush_inv();
+	return nents;
+}
+
+static dma_addr_t mn10300_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction direction, struct dma_attrs *attrs)
+{
+	return page_to_bus(page) + offset;
+}
+
+static void mn10300_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				size_t size, enum dma_data_direction direction)
+{
+	mn10300_dcache_flush_inv();
+}
+
+static void mn10300_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+			    int nelems, enum dma_data_direction direction)
+{
+	mn10300_dcache_flush_inv();
+}
+
+static int mn10300_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+	 * guarantee allocations that must be within a tighter range than
+	 * GFP_DMA
+	 */
+	if (mask < 0x00ffffff)
+		return 0;
+	return 1;
+}
+
+struct dma_map_ops mn10300_dma_ops = {
+	.alloc			= mn10300_dma_alloc,
+	.free			= mn10300_dma_free,
+	.map_page		= mn10300_dma_map_page,
+	.map_sg			= mn10300_dma_map_sg,
+	.sync_single_for_device	= mn10300_dma_sync_single_for_device,
+	.sync_sg_for_device	= mn10300_dma_sync_sg_for_device,
+};
diff --git a/arch/nios2/include/asm/checksum.h b/arch/nios2/include/asm/checksum.h
index 6bc1f0d5df7b..703c5ee63421 100644
--- a/arch/nios2/include/asm/checksum.h
+++ b/arch/nios2/include/asm/checksum.h
@@ -45,8 +45,7 @@ static inline __sum16 csum_fold(__wsum sum)
  */
 #define csum_tcpudp_nofold csum_tcpudp_nofold
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	__asm__ __volatile__(
@@ -60,7 +59,7 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 		"cmpltu	r8, %0, %3\n"
 		"add	%0, %0, r8\n"	/* add carry */
 		: "=r" (sum), "=r" (saddr)
-		: "r" (daddr), "r" ((ntohs(len) << 16) + (proto * 256)),
+		: "r" (daddr), "r" ((len + proto) << 8),
 		  "0" (sum),
 		  "1" (saddr)
 		: "r8");
@@ -69,8 +68,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 }
 
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto, __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }
diff --git a/arch/nios2/include/asm/cmpxchg.h b/arch/nios2/include/asm/cmpxchg.h
index 85938711542d..a7978f14d157 100644
--- a/arch/nios2/include/asm/cmpxchg.h
+++ b/arch/nios2/include/asm/cmpxchg.h
@@ -9,53 +9,6 @@
 #ifndef _ASM_NIOS2_CMPXCHG_H
 #define _ASM_NIOS2_CMPXCHG_H
 
-#include <linux/irqflags.h>
-
-#define xchg(ptr, x)	\
-	((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x)		((volatile struct __xchg_dummy *)(x))
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-					int size)
-{
-	unsigned long tmp, flags;
-
-	local_irq_save(flags);
-
-	switch (size) {
-	case 1:
-		__asm__ __volatile__(
-			"ldb	%0, %2\n"
-			"stb	%1, %2\n"
-			: "=&r" (tmp)
-			: "r" (x), "m" (*__xg(ptr))
-			: "memory");
-		break;
-	case 2:
-		__asm__ __volatile__(
-			"ldh	%0, %2\n"
-			"sth	%1, %2\n"
-			: "=&r" (tmp)
-			: "r" (x), "m" (*__xg(ptr))
-			: "memory");
-		break;
-	case 4:
-		__asm__ __volatile__(
-			"ldw	%0, %2\n"
-			"stw	%1, %2\n"
-			: "=&r" (tmp)
-			: "r" (x), "m" (*__xg(ptr))
-			: "memory");
-		break;
-	}
-
-	local_irq_restore(flags);
-	return tmp;
-}
-
 #include <asm-generic/cmpxchg.h>
-#include <asm-generic/cmpxchg-local.h>
 
 #endif /* _ASM_NIOS2_CMPXCHG_H */
diff --git a/arch/nios2/include/asm/dma-mapping.h b/arch/nios2/include/asm/dma-mapping.h
index b5567233f7f1..bec8ac8e6ad2 100644
--- a/arch/nios2/include/asm/dma-mapping.h
+++ b/arch/nios2/include/asm/dma-mapping.h
@@ -10,131 +10,20 @@
 #ifndef _ASM_NIOS2_DMA_MAPPING_H
 #define _ASM_NIOS2_DMA_MAPPING_H
 
-#include <linux/scatterlist.h>
-#include <linux/cache.h>
-#include <asm/cacheflush.h>
+extern struct dma_map_ops nios2_dma_ops;
 
-static inline void __dma_sync_for_device(void *vaddr, size_t size,
-			      enum dma_data_direction direction)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	switch (direction) {
-	case DMA_FROM_DEVICE:
-		invalidate_dcache_range((unsigned long)vaddr,
-			(unsigned long)(vaddr + size));
-		break;
-	case DMA_TO_DEVICE:
-		/*
-		 * We just need to flush the caches here , but Nios2 flush
-		 * instruction will do both writeback and invalidate.
-		 */
-	case DMA_BIDIRECTIONAL: /* flush and invalidate */
-		flush_dcache_range((unsigned long)vaddr,
-			(unsigned long)(vaddr + size));
-		break;
-	default:
-		BUG();
-	}
-}
-
-static inline void __dma_sync_for_cpu(void *vaddr, size_t size,
-			      enum dma_data_direction direction)
-{
-	switch (direction) {
-	case DMA_BIDIRECTIONAL:
-	case DMA_FROM_DEVICE:
-		invalidate_dcache_range((unsigned long)vaddr,
-			(unsigned long)(vaddr + size));
-		break;
-	case DMA_TO_DEVICE:
-		break;
-	default:
-		BUG();
-	}
-}
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle);
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *ptr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
-	__dma_sync_for_device(ptr, size, direction);
-	return virt_to_phys(ptr);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				size_t size, enum dma_data_direction direction)
-{
-}
-
-extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	enum dma_data_direction direction);
-extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-	size_t size, enum dma_data_direction direction);
-extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-	int nhwentries, enum dma_data_direction direction);
-extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-	size_t size, enum dma_data_direction direction);
-extern void dma_sync_single_for_device(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction);
-extern void dma_sync_single_range_for_cpu(struct device *dev,
-	dma_addr_t dma_handle, unsigned long offset, size_t size,
-	enum dma_data_direction direction);
-extern void dma_sync_single_range_for_device(struct device *dev,
-	dma_addr_t dma_handle, unsigned long offset, size_t size,
-	enum dma_data_direction direction);
-extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-	int nelems, enum dma_data_direction direction);
-extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-	int nelems, enum dma_data_direction direction);
-
-static inline int dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
-}
-
-static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
-	return 0;
+	return &nios2_dma_ops;
 }
 
 /*
-* dma_alloc_noncoherent() returns non-cacheable memory, so there's no need to
-* do any flushing here.
-*/
+ * dma_alloc_noncoherent() returns non-cacheable memory, so there's no need to
+ * do any flushing here.
+ */
 static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 				  enum dma_data_direction direction)
 {
 }
 
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-		void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-		void *cpu_addr, dma_addr_t dma_addr,
-		size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
 #endif /* _ASM_NIOS2_DMA_MAPPING_H */
diff --git a/arch/nios2/kernel/prom.c b/arch/nios2/kernel/prom.c
index 718dd197909f..367c5426157b 100644
--- a/arch/nios2/kernel/prom.c
+++ b/arch/nios2/kernel/prom.c
@@ -97,8 +97,7 @@ static int __init early_init_dt_scan_serial(unsigned long node,
 		return 0;
 #endif
 
-	*addr64 = fdt_translate_address((const void *)initial_boot_params,
-		node);
+	*addr64 = of_flat_dt_translate_address(node);
 
 	return *addr64 == OF_BAD_ADDR ? 0 : 1;
 }
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index b101a43d3c5a..a4ff86d58d5c 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -104,7 +104,7 @@ asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
 				       unsigned r7)
 {
 	unsigned dtb_passed = 0;
-	char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
+	char cmdline_passed[COMMAND_LINE_SIZE] __maybe_unused = { 0, };
 
 #if defined(CONFIG_NIOS2_PASS_CMDLINE)
 	if (r4 == 0x534f494e) { /* r4 is magic NIOS */
diff --git a/arch/nios2/kernel/vmlinux.lds.S b/arch/nios2/kernel/vmlinux.lds.S
index 326fab40a9de..e23e89539967 100644
--- a/arch/nios2/kernel/vmlinux.lds.S
+++ b/arch/nios2/kernel/vmlinux.lds.S
@@ -39,6 +39,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		KPROBES_TEXT
 	} =0
 	_etext = .;
diff --git a/arch/nios2/lib/memmove.c b/arch/nios2/lib/memmove.c
index c65ef517eb80..866c021f278c 100644
--- a/arch/nios2/lib/memmove.c
+++ b/arch/nios2/lib/memmove.c
@@ -10,7 +10,6 @@
 #include <linux/types.h>
 #include <linux/string.h>
 
-#ifdef __HAVE_ARCH_MEMMOVE
 void *memmove(void *d, const void *s, size_t count)
 {
 	unsigned long dst, src;
@@ -79,4 +78,3 @@ restdown:
 
 	return d;
 }
-#endif /* __HAVE_ARCH_MEMMOVE */
diff --git a/arch/nios2/lib/memset.c b/arch/nios2/lib/memset.c
index 65e97802f5cc..c2cfcb121e34 100644
--- a/arch/nios2/lib/memset.c
+++ b/arch/nios2/lib/memset.c
@@ -10,7 +10,6 @@
 #include <linux/types.h>
 #include <linux/string.h>
 
-#ifdef __HAVE_ARCH_MEMSET
 void *memset(void *s, int c, size_t count)
 {
 	int destptr, charcnt, dwordcnt, fill8reg, wrkrega;
@@ -78,4 +77,3 @@ void *memset(void *s, int c, size_t count)
 
 	return s;
 }
-#endif /* __HAVE_ARCH_MEMSET */
diff --git a/arch/nios2/mm/cacheflush.c b/arch/nios2/mm/cacheflush.c
index 223cdcc8203f..87bf88ed04c6 100644
--- a/arch/nios2/mm/cacheflush.c
+++ b/arch/nios2/mm/cacheflush.c
@@ -23,22 +23,6 @@ static void __flush_dcache(unsigned long start, unsigned long end)
 	end += (cpuinfo.dcache_line_size - 1);
 	end &= ~(cpuinfo.dcache_line_size - 1);
 
-	for (addr = start; addr < end; addr += cpuinfo.dcache_line_size) {
-		__asm__ __volatile__ ("   flushda 0(%0)\n"
-					: /* Outputs */
-					: /* Inputs  */ "r"(addr)
-					/* : No clobber */);
-	}
-}
-
-static void __flush_dcache_all(unsigned long start, unsigned long end)
-{
-	unsigned long addr;
-
-	start &= ~(cpuinfo.dcache_line_size - 1);
-	end += (cpuinfo.dcache_line_size - 1);
-	end &= ~(cpuinfo.dcache_line_size - 1);
-
 	if (end > start + cpuinfo.dcache_size)
 		end = start + cpuinfo.dcache_size;
 
@@ -112,7 +96,7 @@ static void flush_aliases(struct address_space *mapping, struct page *page)
 
 void flush_cache_all(void)
 {
-	__flush_dcache_all(0, cpuinfo.dcache_size);
+	__flush_dcache(0, cpuinfo.dcache_size);
 	__flush_icache(0, cpuinfo.icache_size);
 }
 
@@ -182,7 +166,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 */
 	unsigned long start = (unsigned long)page_address(page);
 
-	__flush_dcache_all(start, start + PAGE_SIZE);
+	__flush_dcache(start, start + PAGE_SIZE);
 }
 
 void flush_dcache_page(struct page *page)
@@ -268,7 +252,7 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 {
 	flush_cache_page(vma, user_vaddr, page_to_pfn(page));
 	memcpy(dst, src, len);
-	__flush_dcache_all((unsigned long)src, (unsigned long)src + len);
+	__flush_dcache((unsigned long)src, (unsigned long)src + len);
 	if (vma->vm_flags & VM_EXEC)
 		__flush_icache((unsigned long)src, (unsigned long)src + len);
 }
@@ -279,7 +263,7 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 {
 	flush_cache_page(vma, user_vaddr, page_to_pfn(page));
 	memcpy(dst, src, len);
-	__flush_dcache_all((unsigned long)dst, (unsigned long)dst + len);
+	__flush_dcache((unsigned long)dst, (unsigned long)dst + len);
 	if (vma->vm_flags & VM_EXEC)
 		__flush_icache((unsigned long)dst, (unsigned long)dst + len);
 }
diff --git a/arch/nios2/mm/dma-mapping.c b/arch/nios2/mm/dma-mapping.c
index ac5da7594f0b..90422c367ed3 100644
--- a/arch/nios2/mm/dma-mapping.c
+++ b/arch/nios2/mm/dma-mapping.c
@@ -20,9 +20,46 @@
 #include <linux/cache.h>
 #include <asm/cacheflush.h>
 
+static inline void __dma_sync_for_device(void *vaddr, size_t size,
+			      enum dma_data_direction direction)
+{
+	switch (direction) {
+	case DMA_FROM_DEVICE:
+		invalidate_dcache_range((unsigned long)vaddr,
+			(unsigned long)(vaddr + size));
+		break;
+	case DMA_TO_DEVICE:
+		/*
+		 * We just need to flush the caches here , but Nios2 flush
+		 * instruction will do both writeback and invalidate.
+		 */
+	case DMA_BIDIRECTIONAL: /* flush and invalidate */
+		flush_dcache_range((unsigned long)vaddr,
+			(unsigned long)(vaddr + size));
+		break;
+	default:
+		BUG();
+	}
+}
 
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			    dma_addr_t *dma_handle, gfp_t gfp)
+static inline void __dma_sync_for_cpu(void *vaddr, size_t size,
+			      enum dma_data_direction direction)
+{
+	switch (direction) {
+	case DMA_BIDIRECTIONAL:
+	case DMA_FROM_DEVICE:
+		invalidate_dcache_range((unsigned long)vaddr,
+			(unsigned long)(vaddr + size));
+		break;
+	case DMA_TO_DEVICE:
+		break;
+	default:
+		BUG();
+	}
+}
+
+static void *nios2_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
 {
 	void *ret;
 
@@ -45,24 +82,21 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 
 	return ret;
 }
-EXPORT_SYMBOL(dma_alloc_coherent);
 
-void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-			dma_addr_t dma_handle)
+static void nios2_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	unsigned long addr = (unsigned long) CAC_ADDR((unsigned long) vaddr);
 
 	free_pages(addr, get_order(size));
 }
-EXPORT_SYMBOL(dma_free_coherent);
 
-int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-		enum dma_data_direction direction)
+static int nios2_dma_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 
-	BUG_ON(!valid_dma_direction(direction));
-
 	for_each_sg(sg, sg, nents, i) {
 		void *addr;
 
@@ -75,40 +109,32 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 
 	return nents;
 }
-EXPORT_SYMBOL(dma_map_sg);
 
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
+static dma_addr_t nios2_dma_map_page(struct device *dev, struct page *page,
 			unsigned long offset, size_t size,
-			enum dma_data_direction direction)
+			enum dma_data_direction direction,
+			struct dma_attrs *attrs)
 {
-	void *addr;
-
-	BUG_ON(!valid_dma_direction(direction));
+	void *addr = page_address(page) + offset;
 
-	addr = page_address(page) + offset;
 	__dma_sync_for_device(addr, size, direction);
-
 	return page_to_phys(page) + offset;
 }
-EXPORT_SYMBOL(dma_map_page);
 
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-		    enum dma_data_direction direction)
+static void nios2_dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+		size_t size, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
-	BUG_ON(!valid_dma_direction(direction));
-
 	__dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
 }
-EXPORT_SYMBOL(dma_unmap_page);
 
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-		  enum dma_data_direction direction)
+static void nios2_dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		int nhwentries, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	void *addr;
 	int i;
 
-	BUG_ON(!valid_dma_direction(direction));
-
 	if (direction == DMA_TO_DEVICE)
 		return;
 
@@ -118,69 +144,54 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 			__dma_sync_for_cpu(addr, sg->length, direction);
 	}
 }
-EXPORT_SYMBOL(dma_unmap_sg);
-
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-			     size_t size, enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
 
-	__dma_sync_for_cpu(phys_to_virt(dma_handle), size, direction);
-}
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
-
-void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
-				size_t size, enum dma_data_direction direction)
-{
-	BUG_ON(!valid_dma_direction(direction));
-
-	__dma_sync_for_device(phys_to_virt(dma_handle), size, direction);
-}
-EXPORT_SYMBOL(dma_sync_single_for_device);
-
-void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-					unsigned long offset, size_t size,
-					enum dma_data_direction direction)
+static void nios2_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-
 	__dma_sync_for_cpu(phys_to_virt(dma_handle), size, direction);
 }
-EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
 
-void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-					unsigned long offset, size_t size,
-					enum dma_data_direction direction)
+static void nios2_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
 {
-	BUG_ON(!valid_dma_direction(direction));
-
 	__dma_sync_for_device(phys_to_virt(dma_handle), size, direction);
 }
-EXPORT_SYMBOL(dma_sync_single_range_for_device);
 
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-			 enum dma_data_direction direction)
+static void nios2_dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sg, int nelems,
+		enum dma_data_direction direction)
 {
 	int i;
 
-	BUG_ON(!valid_dma_direction(direction));
-
 	/* Make sure that gcc doesn't leave the empty loop body.  */
 	for_each_sg(sg, sg, nelems, i)
 		__dma_sync_for_cpu(sg_virt(sg), sg->length, direction);
 }
-EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
-				int nelems, enum dma_data_direction direction)
+static void nios2_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sg, int nelems,
+		enum dma_data_direction direction)
 {
 	int i;
 
-	BUG_ON(!valid_dma_direction(direction));
-
 	/* Make sure that gcc doesn't leave the empty loop body.  */
 	for_each_sg(sg, sg, nelems, i)
 		__dma_sync_for_device(sg_virt(sg), sg->length, direction);
 
 }
-EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+struct dma_map_ops nios2_dma_ops = {
+	.alloc			= nios2_dma_alloc,
+	.free			= nios2_dma_free,
+	.map_page		= nios2_dma_map_page,
+	.unmap_page		= nios2_dma_unmap_page,
+	.map_sg			= nios2_dma_map_sg,
+	.unmap_sg		= nios2_dma_unmap_sg,
+	.sync_single_for_device	= nios2_dma_sync_single_for_device,
+	.sync_single_for_cpu	= nios2_dma_sync_single_for_cpu,
+	.sync_sg_for_cpu	= nios2_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= nios2_dma_sync_sg_for_device,
+};
+EXPORT_SYMBOL(nios2_dma_ops);
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 443f44de1020..e118c02cc79a 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -29,9 +29,6 @@ config OPENRISC
 config MMU
 	def_bool y
 
-config HAVE_DMA_ATTRS
-	def_bool y
-
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
diff --git a/arch/openrisc/include/asm/dma-mapping.h b/arch/openrisc/include/asm/dma-mapping.h
index 413bfcf86384..1f260bccb368 100644
--- a/arch/openrisc/include/asm/dma-mapping.h
+++ b/arch/openrisc/include/asm/dma-mapping.h
@@ -42,6 +42,4 @@ static inline int dma_supported(struct device *dev, u64 dma_mask)
 	return dma_mask == DMA_BIT_MASK(32);
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 #endif	/* __ASM_OPENRISC_DMA_MAPPING_H */
diff --git a/arch/openrisc/include/asm/gpio.h b/arch/openrisc/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/openrisc/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/openrisc/include/asm/page.h b/arch/openrisc/include/asm/page.h
index 108906f991d6..e613d3673034 100644
--- a/arch/openrisc/include/asm/page.h
+++ b/arch/openrisc/include/asm/page.h
@@ -40,9 +40,6 @@
 
 #ifndef __ASSEMBLY__
 
-#define get_user_page(vaddr)            __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr)      free_page(addr)
-
 #define clear_page(page)	memset((page), 0, PAGE_SIZE)
 #define copy_page(to, from)	memcpy((to), (from), PAGE_SIZE)
 
diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S
index 2d69a853b742..d936de4c07ca 100644
--- a/arch/openrisc/kernel/vmlinux.lds.S
+++ b/arch/openrisc/kernel/vmlinux.lds.S
@@ -50,6 +50,7 @@ SECTIONS
 	  LOCK_TEXT
 	  KPROBES_TEXT
 	  IRQENTRY_TEXT
+	  SOFTIRQENTRY_TEXT
 	  *(.fixup)
 	  *(.text.__*)
 	  _etext = .;
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index c36546959e86..88cfaa8af78e 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -4,13 +4,14 @@ config PARISC
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_IDE
 	select HAVE_OPROFILE
-	select HAVE_FUNCTION_TRACER if 64BIT
-	select HAVE_FUNCTION_GRAPH_TRACER if 64BIT
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_GRAPH_TRACER
 	select ARCH_WANT_FRAME_POINTERS
 	select RTC_CLASS
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
 	select BUG
+	select BUILDTIME_EXTABLE_SORT
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
@@ -29,6 +30,8 @@ config PARISC
 	select TTY # Needed for pdc_cons.c
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_SECCOMP_FILTER
+	select ARCH_NO_COHERENT_DMA_MMAP
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
@@ -79,9 +82,6 @@ config TIME_LOW_RES
 	depends on SMP
 	default y
 
-config HAVE_LATENCYTOP_SUPPORT
-        def_bool y
-
 # unless you want to implement ACPI on PA-RISC ... ;-)
 config PM
 	bool
@@ -108,6 +108,9 @@ config PGTABLE_LEVELS
 	default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
 	default 2
 
+config SYS_SUPPORTS_HUGETLBFS
+	def_bool y if PA20
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug
index bc989e522a04..68b7cbd0810a 100644
--- a/arch/parisc/Kconfig.debug
+++ b/arch/parisc/Kconfig.debug
@@ -2,9 +2,13 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
 config DEBUG_RODATA
        bool "Write protect kernel read-only data structures"
        depends on DEBUG_KERNEL
+       default y
        help
          Mark the kernel read-only data as write-protected in the pagetables,
          in order to catch accidental (and incorrect) writes to such const
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 965a0999fc4c..75cb451b1f03 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -62,9 +62,7 @@ cflags-y	+= -mdisable-fpregs
 
 # Without this, "ld -r" results in .text sections that are too big
 # (> 0x40000) for branches to reach stubs.
-ifndef CONFIG_FUNCTION_TRACER
-  cflags-y	+= -ffunction-sections
-endif
+cflags-y	+= -ffunction-sections
 
 # Use long jumps instead of long branches (needed if your linker fails to
 # link a too big vmlinux executable). Not enabled for building modules.
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 9387cc2693f6..db8f56bf3883 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -183,7 +183,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_DEBUG_RODATA=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_HMAC=y
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 0490199d7b15..1a4f776b49b8 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -193,7 +193,6 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_HMAC=y
diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig
index 4d8127e8428a..310b6657e4ac 100644
--- a/arch/parisc/configs/default_defconfig
+++ b/arch/parisc/configs/default_defconfig
@@ -211,7 +211,6 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_MD4=m
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
index 0ffb08ff5125..5b04d703a924 100644
--- a/arch/parisc/configs/generic-32bit_defconfig
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -301,7 +301,6 @@ CONFIG_RCU_CPU_STALL_INFO=y
 CONFIG_LATENCYTOP=y
 CONFIG_LKDTM=m
 CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_HMAC=y
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index b3069fd83468..60e6f07b7e32 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -523,7 +523,7 @@
 	 */
 #define ASM_EXCEPTIONTABLE_ENTRY(fault_addr, except_addr)	\
 	.section __ex_table,"aw"			!	\
-	ASM_ULONG_INSN	fault_addr, except_addr		!	\
+	.word (fault_addr - .), (except_addr - .)	!	\
 	.previous
 
 
diff --git a/arch/parisc/include/asm/cache.h b/arch/parisc/include/asm/cache.h
index 3d0e17bcc8e9..df0f52bd18b4 100644
--- a/arch/parisc/include/asm/cache.h
+++ b/arch/parisc/include/asm/cache.h
@@ -22,6 +22,9 @@
 
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
+/* Read-only memory is marked before mark_rodata_ro() is called. */
+#define __ro_after_init	__read_mostly
+
 void parisc_cache_init(void);	/* initializes cache-flushing */
 void disable_sr_hashing_asm(int); /* low level support for above */
 void disable_sr_hashing(void);   /* turns off space register hashing */
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index ec2df4bab302..7bd69bd43a01 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -121,10 +121,6 @@ flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long vma
 	}
 }
 
-#ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
-#endif
-
 #include <asm/kmap_types.h>
 
 #define ARCH_HAS_KMAP
@@ -156,7 +152,6 @@ static inline void __kunmap_atomic(void *addr)
 
 #define kmap_atomic_prot(page, prot)	kmap_atomic(page)
 #define kmap_atomic_pfn(pfn)	kmap_atomic(pfn_to_page(pfn))
-#define kmap_atomic_to_page(ptr)	virt_to_page(ptr)
 
 #endif /* _PARISC_CACHEFLUSH_H */
 
diff --git a/arch/parisc/include/asm/checksum.h b/arch/parisc/include/asm/checksum.h
index c84b2fcb18a9..60c2c42619c9 100644
--- a/arch/parisc/include/asm/checksum.h
+++ b/arch/parisc/include/asm/checksum.h
@@ -85,9 +85,8 @@ static inline __sum16 csum_fold(__wsum csum)
 }
  
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					       unsigned short len,
-					       unsigned short proto,
-					       __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	__asm__(
 	"	add  %1, %0, %0\n"
@@ -104,9 +103,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
@@ -124,7 +122,7 @@ static inline __sum16 ip_compute_csum(const void *buf, int len)
 #define _HAVE_ARCH_IPV6_CSUM
 static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 					  const struct in6_addr *daddr,
-					  __u32 len, unsigned short proto,
+					  __u32 len, __u8 proto,
 					  __wsum sum)
 {
 	__asm__ __volatile__ (
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index 94710cfc1ce8..3387307cc33e 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -183,6 +183,13 @@ typedef struct compat_siginfo {
 			int _band;      /* POLL_IN, POLL_OUT, POLL_MSG */
 			int _fd;
 		} _sigpoll;
+
+		/* SIGSYS */
+		struct {
+			compat_uptr_t _call_addr; /* calling user insn */
+			int _syscall;	/* triggering system call number */
+			compat_uint_t _arch;	/* AUDIT_ARCH_* of syscall */
+		} _sigsys;
 	} _sifields;
 } compat_siginfo_t;
 
@@ -206,10 +213,10 @@ struct compat_ipc64_perm {
 
 struct compat_semid64_ds {
 	struct compat_ipc64_perm sem_perm;
-	compat_time_t sem_otime;
 	unsigned int __unused1;
-	compat_time_t sem_ctime;
+	compat_time_t sem_otime;
 	unsigned int __unused2;
+	compat_time_t sem_ctime;
 	compat_ulong_t sem_nsems;
 	compat_ulong_t __unused3;
 	compat_ulong_t __unused4;
diff --git a/arch/parisc/include/asm/dma-mapping.h b/arch/parisc/include/asm/dma-mapping.h
index d8d60a57183f..16e024602737 100644
--- a/arch/parisc/include/asm/dma-mapping.h
+++ b/arch/parisc/include/asm/dma-mapping.h
@@ -1,30 +1,11 @@
 #ifndef _PARISC_DMA_MAPPING_H
 #define _PARISC_DMA_MAPPING_H
 
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
 #include <asm/cacheflush.h>
 
-/* See Documentation/DMA-API-HOWTO.txt */
-struct hppa_dma_ops {
-	int  (*dma_supported)(struct device *dev, u64 mask);
-	void *(*alloc_consistent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
-	void *(*alloc_noncoherent)(struct device *dev, size_t size, dma_addr_t *iova, gfp_t flag);
-	void (*free_consistent)(struct device *dev, size_t size, void *vaddr, dma_addr_t iova);
-	dma_addr_t (*map_single)(struct device *dev, void *addr, size_t size, enum dma_data_direction direction);
-	void (*unmap_single)(struct device *dev, dma_addr_t iova, size_t size, enum dma_data_direction direction);
-	int  (*map_sg)(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction);
-	void (*unmap_sg)(struct device *dev, struct scatterlist *sg, int nhwents, enum dma_data_direction direction);
-	void (*dma_sync_single_for_cpu)(struct device *dev, dma_addr_t iova, unsigned long offset, size_t size, enum dma_data_direction direction);
-	void (*dma_sync_single_for_device)(struct device *dev, dma_addr_t iova, unsigned long offset, size_t size, enum dma_data_direction direction);
-	void (*dma_sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction);
-	void (*dma_sync_sg_for_device)(struct device *dev, struct scatterlist *sg, int nelems, enum dma_data_direction direction);
-};
-
 /*
-** We could live without the hppa_dma_ops indirection if we didn't want
-** to support 4 different coherent dma models with one binary (they will
-** someday be loadable modules):
+** We need to support 4 different coherent dma models with one binary:
+**
 **     I/O MMU        consistent method           dma_sync behavior
 **  =============   ======================       =======================
 **  a) PA-7x00LC    uncachable host memory          flush/purge
@@ -40,158 +21,22 @@ struct hppa_dma_ops {
 */
 
 #ifdef CONFIG_PA11
-extern struct hppa_dma_ops pcxl_dma_ops;
-extern struct hppa_dma_ops pcx_dma_ops;
+extern struct dma_map_ops pcxl_dma_ops;
+extern struct dma_map_ops pcx_dma_ops;
 #endif
 
-extern struct hppa_dma_ops *hppa_dma_ops;
-
-#define dma_alloc_attrs(d, s, h, f, a) dma_alloc_coherent(d, s, h, f)
-#define dma_free_attrs(d, s, h, f, a) dma_free_coherent(d, s, h, f)
-
-static inline void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		   gfp_t flag)
-{
-	return hppa_dma_ops->alloc_consistent(dev, size, dma_handle, flag);
-}
-
-static inline void *
-dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		      gfp_t flag)
-{
-	return hppa_dma_ops->alloc_noncoherent(dev, size, dma_handle, flag);
-}
-
-static inline void
-dma_free_coherent(struct device *dev, size_t size, 
-		    void *vaddr, dma_addr_t dma_handle)
-{
-	hppa_dma_ops->free_consistent(dev, size, vaddr, dma_handle);
-}
-
-static inline void
-dma_free_noncoherent(struct device *dev, size_t size, 
-		    void *vaddr, dma_addr_t dma_handle)
-{
-	hppa_dma_ops->free_consistent(dev, size, vaddr, dma_handle);
-}
-
-static inline dma_addr_t
-dma_map_single(struct device *dev, void *ptr, size_t size,
-	       enum dma_data_direction direction)
-{
-	return hppa_dma_ops->map_single(dev, ptr, size, direction);
-}
-
-static inline void
-dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
-		 enum dma_data_direction direction)
-{
-	hppa_dma_ops->unmap_single(dev, dma_addr, size, direction);
-}
-
-static inline int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction direction)
-{
-	return hppa_dma_ops->map_sg(dev, sg, nents, direction);
-}
+extern struct dma_map_ops *hppa_dma_ops;
 
-static inline void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	     enum dma_data_direction direction)
-{
-	hppa_dma_ops->unmap_sg(dev, sg, nhwentries, direction);
-}
-
-static inline dma_addr_t
-dma_map_page(struct device *dev, struct page *page, unsigned long offset,
-	     size_t size, enum dma_data_direction direction)
-{
-	return dma_map_single(dev, (page_address(page) + (offset)), size, direction);
-}
-
-static inline void
-dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	       enum dma_data_direction direction)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	dma_unmap_single(dev, dma_address, size, direction);
-}
-
-
-static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	if(hppa_dma_ops->dma_sync_single_for_cpu)
-		hppa_dma_ops->dma_sync_single_for_cpu(dev, dma_handle, 0, size, direction);
-}
-
-static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	if(hppa_dma_ops->dma_sync_single_for_device)
-		hppa_dma_ops->dma_sync_single_for_device(dev, dma_handle, 0, size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
-		      unsigned long offset, size_t size,
-		      enum dma_data_direction direction)
-{
-	if(hppa_dma_ops->dma_sync_single_for_cpu)
-		hppa_dma_ops->dma_sync_single_for_cpu(dev, dma_handle, offset, size, direction);
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
-		      unsigned long offset, size_t size,
-		      enum dma_data_direction direction)
-{
-	if(hppa_dma_ops->dma_sync_single_for_device)
-		hppa_dma_ops->dma_sync_single_for_device(dev, dma_handle, offset, size, direction);
-}
-
-static inline void
-dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
-		 enum dma_data_direction direction)
-{
-	if(hppa_dma_ops->dma_sync_sg_for_cpu)
-		hppa_dma_ops->dma_sync_sg_for_cpu(dev, sg, nelems, direction);
-}
-
-static inline void
-dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
-		 enum dma_data_direction direction)
-{
-	if(hppa_dma_ops->dma_sync_sg_for_device)
-		hppa_dma_ops->dma_sync_sg_for_device(dev, sg, nelems, direction);
-}
-
-static inline int
-dma_supported(struct device *dev, u64 mask)
-{
-	return hppa_dma_ops->dma_supported(dev, mask);
-}
-
-static inline int
-dma_set_mask(struct device *dev, u64 mask)
-{
-	if(!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
+	return hppa_dma_ops;
 }
 
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	       enum dma_data_direction direction)
 {
-	if(hppa_dma_ops->dma_sync_single_for_cpu)
+	if (hppa_dma_ops->sync_single_for_cpu)
 		flush_kernel_dcache_range((unsigned long)vaddr, size);
 }
 
@@ -238,22 +83,4 @@ struct parisc_device;
 void * sba_get_iommu(struct parisc_device *dev);
 #endif
 
-/* At the moment, we panic on error for IOMMU resource exaustion */
-#define dma_mapping_error(dev, x)	0
-
-/* This API cannot be supported on PA-RISC */
-static inline int dma_mmap_coherent(struct device *dev,
-				    struct vm_area_struct *vma, void *cpu_addr,
-				    dma_addr_t dma_addr, size_t size)
-{
-	return -EINVAL;
-}
-
-static inline int dma_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size)
-{
-	return -EINVAL;
-}
-
 #endif
diff --git a/arch/parisc/include/asm/floppy.h b/arch/parisc/include/asm/floppy.h
index f84ff12574b7..6d8276cd25ca 100644
--- a/arch/parisc/include/asm/floppy.h
+++ b/arch/parisc/include/asm/floppy.h
@@ -33,7 +33,7 @@
  * floppy accesses go through the track buffer.
  */
 #define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
 
 #define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
 
diff --git a/arch/parisc/include/asm/ftrace.h b/arch/parisc/include/asm/ftrace.h
index 544ed8ef87eb..24cd81d58d70 100644
--- a/arch/parisc/include/asm/ftrace.h
+++ b/arch/parisc/include/asm/ftrace.h
@@ -4,23 +4,7 @@
 #ifndef __ASSEMBLY__
 extern void mcount(void);
 
-/*
- * Stack of return addresses for functions of a thread.
- * Used in struct thread_info
- */
-struct ftrace_ret_stack {
-	unsigned long ret;
-	unsigned long func;
-	unsigned long long calltime;
-};
-
-/*
- * Primary handler of a function return.
- * It relays on ftrace_return_to_handler.
- * Defined in entry.S
- */
-extern void return_to_handler(void);
-
+#define MCOUNT_INSN_SIZE 4
 
 extern unsigned long return_address(unsigned int);
 
diff --git a/arch/parisc/include/asm/hugetlb.h b/arch/parisc/include/asm/hugetlb.h
new file mode 100644
index 000000000000..a65d888716c4
--- /dev/null
+++ b/arch/parisc/include/asm/hugetlb.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_PARISC64_HUGETLB_H
+#define _ASM_PARISC64_HUGETLB_H
+
+#include <asm/page.h>
+#include <asm-generic/hugetlb.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep);
+
+int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty);
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline void arch_clear_hugepage_flags(struct page *page)
+{
+}
+
+#endif /* _ASM_PARISC64_HUGETLB_H */
diff --git a/arch/parisc/include/asm/page.h b/arch/parisc/include/asm/page.h
index 60d5d174dfe4..80e742a1c162 100644
--- a/arch/parisc/include/asm/page.h
+++ b/arch/parisc/include/asm/page.h
@@ -145,11 +145,22 @@ extern int npmem_ranges;
 #endif /* CONFIG_DISCONTIGMEM */
 
 #ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SHIFT		22	/* 4MB (is this fixed?) */
+#define HPAGE_SHIFT		PMD_SHIFT /* fixed for transparent huge pages */
 #define HPAGE_SIZE      	((1UL) << HPAGE_SHIFT)
 #define HPAGE_MASK		(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#if defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define REAL_HPAGE_SHIFT	20 /* 20 = 1MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_1M
+#elif !defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define REAL_HPAGE_SHIFT	22 /* 22 = 4MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4M
+#else
+# define REAL_HPAGE_SHIFT	24 /* 24 = 16MB */
+# define _HUGE_PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16M
 #endif
+#endif /* CONFIG_HUGETLB_PAGE */
 
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
 
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index 71889ea72740..defebd956585 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -167,6 +167,7 @@ static inline void pcibios_register_hba(struct pci_hba_data *x)
 {
 }
 #endif
+extern void pcibios_init_bridge(struct pci_dev *);
 
 /*
  * pcibios_assign_all_busses() is used in drivers/pci/pci.c:pci_do_scan_bus()
@@ -193,9 +194,6 @@ static inline void pcibios_register_hba(struct pci_hba_data *x)
 #define PCIBIOS_MIN_IO          0x10
 #define PCIBIOS_MIN_MEM         0x1000 /* NBPG - but pci/setup-res.c dies */
 
-/* export the pci_ DMA API in terms of the dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
 	return channel ? 15 : 14;
diff --git a/arch/parisc/include/asm/pdc.h b/arch/parisc/include/asm/pdc.h
index 7eb616e4bf8a..451906d78136 100644
--- a/arch/parisc/include/asm/pdc.h
+++ b/arch/parisc/include/asm/pdc.h
@@ -63,7 +63,7 @@ struct pdc_tlb_cf {		/* for PDC_CACHE (I/D-TLB's) */
 		tc_page : 1,	/* 0 = 2K page-size-machine, 1 = 4k page size */
 		tc_cst  : 3,	/* 0 = incoherent operations, else coherent operations */
 		tc_aid  : 5,	/* ITLB: width of access ids of processor (encoded!) */
-		tc_pad1 : 8;	/* ITLB: width of space-registers (encoded) */
+		tc_sr   : 8;	/* ITLB: width of space-registers (encoded) */
 };
 
 struct pdc_cache_info {		/* main-PDC_CACHE-structure (caches & TLB's) */
diff --git a/arch/parisc/include/asm/pgalloc.h b/arch/parisc/include/asm/pgalloc.h
index 3edbb9fc91b4..f2fd327dce2e 100644
--- a/arch/parisc/include/asm/pgalloc.h
+++ b/arch/parisc/include/asm/pgalloc.h
@@ -35,7 +35,7 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 				        PxD_FLAG_VALID | 
 					PxD_FLAG_ATTACHED) 
 			+ (__u32)(__pa((unsigned long)pgd) >> PxD_VALUE_SHIFT));
-		/* The first pmd entry also is marked with _PAGE_GATEWAY as
+		/* The first pmd entry also is marked with PxD_FLAG_ATTACHED as
 		 * a signal that this pmd may not be freed */
 		__pgd_val_set(*pgd, PxD_FLAG_ATTACHED);
 #endif
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index f93c4a4e6580..291cee28ccb6 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -83,7 +83,11 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
 
 /* This is the size of the initially mapped kernel memory */
-#define KERNEL_INITIAL_ORDER	24	/* 0 to 1<<24 = 16MB */
+#ifdef CONFIG_64BIT
+#define KERNEL_INITIAL_ORDER	25	/* 1<<25 = 32MB */
+#else
+#define KERNEL_INITIAL_ORDER	24	/* 1<<24 = 16MB */
+#endif
 #define KERNEL_INITIAL_SIZE	(1 << KERNEL_INITIAL_ORDER)
 
 #if CONFIG_PGTABLE_LEVELS == 3
@@ -167,7 +171,7 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 #define _PAGE_NO_CACHE_BIT 24   /* (0x080) Uncached Page (U bit) */
 #define _PAGE_ACCESSED_BIT 23   /* (0x100) Software: Page Accessed */
 #define _PAGE_PRESENT_BIT  22   /* (0x200) Software: translation valid */
-/* bit 21 was formerly the FLUSH bit but is now unused */
+#define _PAGE_HPAGE_BIT    21   /* (0x400) Software: Huge Page */
 #define _PAGE_USER_BIT     20   /* (0x800) Software: User accessible page */
 
 /* N.B. The bits are defined in terms of a 32 bit word above, so the */
@@ -194,6 +198,7 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 #define _PAGE_NO_CACHE (1 << xlate_pabit(_PAGE_NO_CACHE_BIT))
 #define _PAGE_ACCESSED (1 << xlate_pabit(_PAGE_ACCESSED_BIT))
 #define _PAGE_PRESENT  (1 << xlate_pabit(_PAGE_PRESENT_BIT))
+#define _PAGE_HUGE     (1 << xlate_pabit(_PAGE_HPAGE_BIT))
 #define _PAGE_USER     (1 << xlate_pabit(_PAGE_USER_BIT))
 
 #define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE |  _PAGE_DIRTY | _PAGE_ACCESSED)
@@ -217,7 +222,7 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 #define PxD_FLAG_VALID    (1 << xlate_pabit(_PxD_VALID_BIT))
 #define PxD_FLAG_MASK     (0xf)
 #define PxD_FLAG_SHIFT    (4)
-#define PxD_VALUE_SHIFT   (8) /* (PAGE_SHIFT-PxD_FLAG_SHIFT) */
+#define PxD_VALUE_SHIFT   (PFN_PTE_SHIFT-PxD_FLAG_SHIFT)
 
 #ifndef __ASSEMBLY__
 
@@ -363,6 +368,19 @@ static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return
 static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 /*
+ * Huge pte definitions.
+ */
+#ifdef CONFIG_HUGETLB_PAGE
+#define pte_huge(pte)           (pte_val(pte) & _PAGE_HUGE)
+#define pte_mkhuge(pte)         (__pte(pte_val(pte) | \
+				 (parisc_requires_coherency() ? 0 : _PAGE_HUGE)))
+#else
+#define pte_huge(pte)           (0)
+#define pte_mkhuge(pte)         (pte)
+#endif
+
+
+/*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
  */
@@ -410,8 +428,9 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 /* Find an entry in the second-level page table.. */
 
 #if CONFIG_PGTABLE_LEVELS == 3
+#define pmd_index(addr)         (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
 #define pmd_offset(dir,address) \
-((pmd_t *) pgd_page_vaddr(*(dir)) + (((address)>>PMD_SHIFT) & (PTRS_PER_PMD-1)))
+((pmd_t *) pgd_page_vaddr(*(dir)) + pmd_index(address))
 #else
 #define pmd_offset(dir,addr) ((pmd_t *) dir)
 #endif
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 54adb60c0a42..2e674e13e005 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -192,33 +192,6 @@ void show_trace(struct task_struct *task, unsigned long *stack);
  */
 typedef unsigned int elf_caddr_t;
 
-#define start_thread_som(regs, new_pc, new_sp) do {	\
-	unsigned long *sp = (unsigned long *)new_sp;	\
-	__u32 spaceid = (__u32)current->mm->context;	\
-	unsigned long pc = (unsigned long)new_pc;	\
-	/* offset pc for priv. level */			\
-	pc |= 3;					\
-							\
-	regs->iasq[0] = spaceid;			\
-	regs->iasq[1] = spaceid;			\
-	regs->iaoq[0] = pc;				\
-	regs->iaoq[1] = pc + 4;                         \
-	regs->sr[2] = LINUX_GATEWAY_SPACE;              \
-	regs->sr[3] = 0xffff;				\
-	regs->sr[4] = spaceid;				\
-	regs->sr[5] = spaceid;				\
-	regs->sr[6] = spaceid;				\
-	regs->sr[7] = spaceid;				\
-	regs->gr[ 0] = USER_PSW;                        \
-	regs->gr[30] = ((new_sp)+63)&~63;		\
-	regs->gr[31] = pc;				\
-							\
-	get_user(regs->gr[26],&sp[0]);			\
-	get_user(regs->gr[25],&sp[-1]); 		\
-	get_user(regs->gr[24],&sp[-2]); 		\
-	get_user(regs->gr[23],&sp[-3]); 		\
-} while(0)
-
 /* The ELF abi wants things done a "wee bit" differently than
  * som does.  Supporting this behavior here avoids
  * having our own version of create_elf_tables.
@@ -338,18 +311,17 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define cpu_relax()	barrier()
 #define cpu_relax_lowlatency() cpu_relax()
 
-/* Used as a macro to identify the combined VIPT/PIPT cached
- * CPUs which require a guarantee of coherency (no inequivalent
- * aliases with different data, whether clean or not) to operate */
-static inline int parisc_requires_coherency(void)
-{
+/*
+ * parisc_requires_coherency() is used to identify the combined VIPT/PIPT
+ * cached CPUs which require a guarantee of coherency (no inequivalent aliases
+ * with different data, whether clean or not) to operate
+ */
 #ifdef CONFIG_PA8X00
-	return (boot_cpu_data.cpu_type == mako) ||
-		(boot_cpu_data.cpu_type == mako2);
+extern int _parisc_requires_coherency;
+#define parisc_requires_coherency()	_parisc_requires_coherency
 #else
-	return 0;
+#define parisc_requires_coherency()	(0)
 #endif
-}
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/parisc/include/asm/syscall.h b/arch/parisc/include/asm/syscall.h
index a5eba95d87fe..637ce8d6f375 100644
--- a/arch/parisc/include/asm/syscall.h
+++ b/arch/parisc/include/asm/syscall.h
@@ -39,6 +39,19 @@ static inline void syscall_get_arguments(struct task_struct *tsk,
 	}
 }
 
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->gr[28] = error ? error : val;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* do nothing */
+}
+
 static inline int syscall_get_arch(void)
 {
 	int arch = AUDIT_ARCH_PARISC;
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index 0abdd4c607ed..7955e43f3f3f 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -44,30 +44,29 @@ static inline long access_ok(int type, const void __user * addr,
 #define LDD_USER(ptr)		BUILD_BUG()
 #define STD_KERNEL(x, ptr)	__put_kernel_asm64(x, ptr)
 #define STD_USER(x, ptr)	__put_user_asm64(x, ptr)
-#define ASM_WORD_INSN		".word\t"
 #else
 #define LDD_KERNEL(ptr)		__get_kernel_asm("ldd", ptr)
 #define LDD_USER(ptr)		__get_user_asm("ldd", ptr)
 #define STD_KERNEL(x, ptr)	__put_kernel_asm("std", x, ptr)
 #define STD_USER(x, ptr)	__put_user_asm("std", x, ptr)
-#define ASM_WORD_INSN		".dword\t"
 #endif
 
 /*
- * The exception table contains two values: the first is an address
- * for an instruction that is allowed to fault, and the second is
- * the address to the fixup routine. Even on a 64bit kernel we could
- * use a 32bit (unsigned int) address here.
+ * The exception table contains two values: the first is the relative offset to
+ * the address of the instruction that is allowed to fault, and the second is
+ * the relative offset to the address of the fixup routine. Since relative
+ * addresses are used, 32bit values are sufficient even on 64bit kernel.
  */
 
+#define ARCH_HAS_RELATIVE_EXTABLE
 struct exception_table_entry {
-	unsigned long insn;	/* address of insn that is allowed to fault. */
-	unsigned long fixup;	/* fixup routine */
+	int insn;	/* relative address of insn that is allowed to fault. */
+	int fixup;	/* relative address of fixup routine */
 };
 
 #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
 	".section __ex_table,\"aw\"\n"			   \
-	ASM_WORD_INSN #fault_addr ", " #except_addr "\n\t" \
+	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
 	".previous\n"
 
 /*
@@ -76,6 +75,7 @@ struct exception_table_entry {
  */
 struct exception_data {
 	unsigned long fault_ip;
+	unsigned long fault_gp;
 	unsigned long fault_space;
 	unsigned long fault_addr;
 };
diff --git a/arch/parisc/include/uapi/asm/ipcbuf.h b/arch/parisc/include/uapi/asm/ipcbuf.h
index bd956c425785..790c4119f647 100644
--- a/arch/parisc/include/uapi/asm/ipcbuf.h
+++ b/arch/parisc/include/uapi/asm/ipcbuf.h
@@ -1,6 +1,9 @@
 #ifndef __PARISC_IPCBUF_H__
 #define __PARISC_IPCBUF_H__
 
+#include <asm/bitsperlong.h>
+#include <linux/posix_types.h>
+
 /*
  * The ipc64_perm structure for PA-RISC is almost identical to
  * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the kernel.
@@ -10,16 +13,18 @@
 
 struct ipc64_perm
 {
-	key_t           key;
-	uid_t           uid;
-	gid_t           gid;
-	uid_t           cuid;
-	gid_t           cgid;
+	__kernel_key_t		key;
+	__kernel_uid_t		uid;
+	__kernel_gid_t		gid;
+	__kernel_uid_t		cuid;
+	__kernel_gid_t		cgid;
+#if __BITS_PER_LONG != 64
 	unsigned short int	__pad1;
-	mode_t          mode;
+#endif
+	__kernel_mode_t		mode;
 	unsigned short int	__pad2;
 	unsigned short int	seq;
-	unsigned int	__pad3;
+	unsigned int		__pad3;
 	unsigned long long int __unused1;
 	unsigned long long int __unused2;
 };
diff --git a/arch/parisc/include/uapi/asm/mman.h b/arch/parisc/include/uapi/asm/mman.h
index ecc3ae1ca28e..f3db7d8eb0c2 100644
--- a/arch/parisc/include/uapi/asm/mman.h
+++ b/arch/parisc/include/uapi/asm/mman.h
@@ -45,20 +45,11 @@
 #define MADV_VPS_INHERIT 7              /* Inherit parents page size */
 
 /* common/generic parameters */
+#define MADV_FREE	8		/* free pages only if memory pressure */
 #define MADV_REMOVE	9		/* remove these pages & resources */
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
 
-/* The range 12-64 is reserved for page size specification. */
-#define MADV_4K_PAGES   12              /* Use 4K pages  */
-#define MADV_16K_PAGES  14              /* Use 16K pages */
-#define MADV_64K_PAGES  16              /* Use 64K pages */
-#define MADV_256K_PAGES 18              /* Use 256K pages */
-#define MADV_1M_PAGES   20              /* Use 1 Megabyte pages */
-#define MADV_4M_PAGES   22              /* Use 4 Megabyte pages */
-#define MADV_16M_PAGES  24              /* Use 16 Megabyte pages */
-#define MADV_64M_PAGES  26              /* Use 64 Megabyte pages */
-
 #define MADV_MERGEABLE   65		/* KSM may merge identical pages */
 #define MADV_UNMERGEABLE 66		/* KSM may not merge identical pages */
 
diff --git a/arch/parisc/include/uapi/asm/msgbuf.h b/arch/parisc/include/uapi/asm/msgbuf.h
index 342138983914..2e83ac758e19 100644
--- a/arch/parisc/include/uapi/asm/msgbuf.h
+++ b/arch/parisc/include/uapi/asm/msgbuf.h
@@ -27,13 +27,13 @@ struct msqid64_ds {
 	unsigned int   __pad3;
 #endif
 	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned int  msg_cbytes;	/* current number of bytes on queue */
-	unsigned int  msg_qnum;	/* number of messages in queue */
-	unsigned int  msg_qbytes;	/* max number of bytes on queue */
+	unsigned long msg_cbytes;	/* current number of bytes on queue */
+	unsigned long msg_qnum;		/* number of messages in queue */
+	unsigned long msg_qbytes;	/* max number of bytes on queue */
 	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
 	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned int  __unused1;
-	unsigned int  __unused2;
+	unsigned long __unused1;
+	unsigned long __unused2;
 };
 
 #endif /* _PARISC_MSGBUF_H */
diff --git a/arch/parisc/include/uapi/asm/posix_types.h b/arch/parisc/include/uapi/asm/posix_types.h
index b9344256f76b..f3b5f70b9a5f 100644
--- a/arch/parisc/include/uapi/asm/posix_types.h
+++ b/arch/parisc/include/uapi/asm/posix_types.h
@@ -7,8 +7,10 @@
  * assume GCC is being used.
  */
 
+#ifndef __LP64__
 typedef unsigned short		__kernel_mode_t;
 #define __kernel_mode_t __kernel_mode_t
+#endif
 
 typedef unsigned short		__kernel_ipc_pid_t;
 #define __kernel_ipc_pid_t __kernel_ipc_pid_t
diff --git a/arch/parisc/include/uapi/asm/sembuf.h b/arch/parisc/include/uapi/asm/sembuf.h
index f01d89e30d73..c20971bf520f 100644
--- a/arch/parisc/include/uapi/asm/sembuf.h
+++ b/arch/parisc/include/uapi/asm/sembuf.h
@@ -23,9 +23,9 @@ struct semid64_ds {
 	unsigned int	__pad2;
 #endif
 	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned int	sem_nsems;		/* no. of semaphores in array */
-	unsigned int	__unused1;
-	unsigned int	__unused2;
+	unsigned long 	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
 };
 
 #endif /* _PARISC_SEMBUF_H */
diff --git a/arch/parisc/include/uapi/asm/shmbuf.h b/arch/parisc/include/uapi/asm/shmbuf.h
index 8496c38560c6..750e13e77991 100644
--- a/arch/parisc/include/uapi/asm/shmbuf.h
+++ b/arch/parisc/include/uapi/asm/shmbuf.h
@@ -30,12 +30,12 @@ struct shmid64_ds {
 #if __BITS_PER_LONG != 64
 	unsigned int		__pad4;
 #endif
-	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
 	__kernel_pid_t		shm_cpid;	/* pid of creator */
 	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned int		shm_nattch;	/* no. of current attaches */
-	unsigned int		__unused1;
-	unsigned int		__unused2;
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
 };
 
 struct shminfo64 {
diff --git a/arch/parisc/include/uapi/asm/siginfo.h b/arch/parisc/include/uapi/asm/siginfo.h
index d7034728f377..8fd10f85c50e 100644
--- a/arch/parisc/include/uapi/asm/siginfo.h
+++ b/arch/parisc/include/uapi/asm/siginfo.h
@@ -1,9 +1,10 @@
 #ifndef _PARISC_SIGINFO_H
 #define _PARISC_SIGINFO_H
 
-#include <asm-generic/siginfo.h>
+#if defined(__LP64__)
+#define __ARCH_SI_PREAMBLE_SIZE   (4 * sizeof(int))
+#endif
 
-#undef NSIGTRAP
-#define NSIGTRAP	4
+#include <asm-generic/siginfo.h>
 
 #endif
diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h
index a5cd40cd8ee1..9c935d717df9 100644
--- a/arch/parisc/include/uapi/asm/socket.h
+++ b/arch/parisc/include/uapi/asm/socket.h
@@ -84,4 +84,9 @@
 #define SO_ATTACH_BPF		0x402B
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	0x402C
+#define SO_ATTACH_REUSEPORT_EBPF	0x402D
+
+#define SO_CNX_ADVICE		0x402E
+
 #endif /* _UAPI_ASM_SOCKET_H */
diff --git a/arch/parisc/include/uapi/asm/stat.h b/arch/parisc/include/uapi/asm/stat.h
index b606b366d0a7..3310d2a49759 100644
--- a/arch/parisc/include/uapi/asm/stat.h
+++ b/arch/parisc/include/uapi/asm/stat.h
@@ -36,37 +36,6 @@ struct stat {
 
 #define STAT_HAVE_NSEC
 
-struct hpux_stat64 {
-	unsigned int	st_dev;		/* dev_t is 32 bits on parisc */
-	unsigned int	st_ino;         /* 32 bits */
-	unsigned short	st_mode;	/* 16 bits */
-	unsigned short	st_nlink;	/* 16 bits */
-	unsigned short	st_reserved1;	/* old st_uid */
-	unsigned short	st_reserved2;	/* old st_gid */
-	unsigned int	st_rdev;
-	signed long long st_size;
-	signed int	st_atime;
-	unsigned int	st_spare1;
-	signed int	st_mtime;
-	unsigned int	st_spare2;
-	signed int	st_ctime;
-	unsigned int	st_spare3;
-	int		st_blksize;
-	unsigned long long st_blocks;
-	unsigned int	__unused1;	/* ACL stuff */
-	unsigned int	__unused2;	/* network */
-	unsigned int	__unused3;      /* network */
-	unsigned int	__unused4;	/* cnodes */
-	unsigned short	__unused5;	/* netsite */
-	short		st_fstype;
-	unsigned int	st_realdev;
-	unsigned short	st_basemode;
-	unsigned short	st_spareshort;
-	unsigned int	st_uid;
-	unsigned int	st_gid;
-	unsigned int	st_spare4[3];
-};
-
 /* This is the struct that 32-bit userspace applications are expecting.
  * How 64-bit apps are going to be compiled, I have no idea.  But at least
  * this way, we don't have a wrapper in the kernel.
diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h
index 33170384d3ac..cc0ce92c93c7 100644
--- a/arch/parisc/include/uapi/asm/unistd.h
+++ b/arch/parisc/include/uapi/asm/unistd.h
@@ -235,8 +235,8 @@
 #define __NR_io_getevents       (__NR_Linux + 217)
 #define __NR_io_submit          (__NR_Linux + 218)
 #define __NR_io_cancel          (__NR_Linux + 219)
-#define __NR_alloc_hugepages    (__NR_Linux + 220)
-#define __NR_free_hugepages     (__NR_Linux + 221)
+#define __NR_alloc_hugepages    (__NR_Linux + 220) /* not used */
+#define __NR_free_hugepages     (__NR_Linux + 221) /* not used */
 #define __NR_exit_group         (__NR_Linux + 222)
 #define __NR_lookup_dcookie     (__NR_Linux + 223)
 #define __NR_epoll_create       (__NR_Linux + 224)
@@ -360,8 +360,12 @@
 #define __NR_execveat		(__NR_Linux + 342)
 #define __NR_membarrier		(__NR_Linux + 343)
 #define __NR_userfaultfd	(__NR_Linux + 344)
+#define __NR_mlock2		(__NR_Linux + 345)
+#define __NR_copy_file_range	(__NR_Linux + 346)
+#define __NR_preadv2		(__NR_Linux + 347)
+#define __NR_pwritev2		(__NR_Linux + 348)
 
-#define __NR_Linux_syscalls	(__NR_userfaultfd + 1)
+#define __NR_Linux_syscalls	(__NR_pwritev2 + 1)
 
 
 #define __IGNORE_select		/* newselect */
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index ff87b4603e3d..69a11183d48d 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -15,11 +15,7 @@ ifdef CONFIG_FUNCTION_TRACER
 # Do not profile debug and lowlevel utilities
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_cache.o = -pg
-CFLAGS_REMOVE_irq.o = -pg
-CFLAGS_REMOVE_pacache.o = -pg
 CFLAGS_REMOVE_perf.o = -pg
-CFLAGS_REMOVE_traps.o = -pg
-CFLAGS_REMOVE_unaligned.o = -pg
 CFLAGS_REMOVE_unwind.o = -pg
 endif
 
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 59001cea13f9..78d30d2ea2d8 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -290,7 +290,16 @@ int main(void)
 	DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT);
 	DEFINE(ASM_PT_INITIAL, PT_INITIAL);
 	BLANK();
+	/* HUGEPAGE_SIZE is only used in vmlinux.lds.S to align kernel text
+	 * and kernel data on physical huge pages */
+#ifdef CONFIG_HUGETLB_PAGE
+	DEFINE(HUGEPAGE_SIZE, 1UL << REAL_HPAGE_SHIFT);
+#else
+	DEFINE(HUGEPAGE_SIZE, PAGE_SIZE);
+#endif
+	BLANK();
 	DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
+	DEFINE(EXCDATA_GP, offsetof(struct exception_data, fault_gp));
 	DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
 	DEFINE(EXCDATA_ADDR, offsetof(struct exception_data, fault_addr));
 	BLANK();
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index cda6dbbe9842..67001277256c 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -172,6 +172,24 @@ parisc_cache_init(void)
 		cache_info.ic_count,
 		cache_info.ic_loop);
 
+	printk("IT  base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx off_base 0x%lx off_stride 0x%lx off_count 0x%lx\n",
+		cache_info.it_sp_base,
+		cache_info.it_sp_stride,
+		cache_info.it_sp_count,
+		cache_info.it_loop,
+		cache_info.it_off_base,
+		cache_info.it_off_stride,
+		cache_info.it_off_count);
+
+	printk("DT  base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx off_base 0x%lx off_stride 0x%lx off_count 0x%lx\n",
+		cache_info.dt_sp_base,
+		cache_info.dt_sp_stride,
+		cache_info.dt_sp_count,
+		cache_info.dt_loop,
+		cache_info.dt_off_base,
+		cache_info.dt_off_stride,
+		cache_info.dt_off_count);
+
 	printk("ic_conf = 0x%lx  alias %d blk %d line %d shift %d\n",
 		*(unsigned long *) (&cache_info.ic_conf),
 		cache_info.ic_conf.cc_alias,
@@ -184,19 +202,19 @@ parisc_cache_init(void)
 		cache_info.ic_conf.cc_cst,
 		cache_info.ic_conf.cc_hv);
 
-	printk("D-TLB conf: sh %d page %d cst %d aid %d pad1 %d\n",
+	printk("D-TLB conf: sh %d page %d cst %d aid %d sr %d\n",
 		cache_info.dt_conf.tc_sh,
 		cache_info.dt_conf.tc_page,
 		cache_info.dt_conf.tc_cst,
 		cache_info.dt_conf.tc_aid,
-		cache_info.dt_conf.tc_pad1);
+		cache_info.dt_conf.tc_sr);
 
-	printk("I-TLB conf: sh %d page %d cst %d aid %d pad1 %d\n",
+	printk("I-TLB conf: sh %d page %d cst %d aid %d sr %d\n",
 		cache_info.it_conf.tc_sh,
 		cache_info.it_conf.tc_page,
 		cache_info.it_conf.tc_cst,
 		cache_info.it_conf.tc_aid,
-		cache_info.it_conf.tc_pad1);
+		cache_info.it_conf.tc_sr);
 #endif
 
 	split_tlb = 0;
@@ -301,7 +319,7 @@ void flush_dcache_page(struct page *page)
 	if (!mapping)
 		return;
 
-	pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+	pgoff = page->index;
 
 	/* We have carefully arranged in arch_get_unmapped_area() that
 	 * *any* mappings of a file are always congruently mapped (whether
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index dba508fe1683..f8150669b8c6 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -40,7 +40,7 @@
 #include <asm/parisc-device.h>
 
 /* See comments in include/asm-parisc/pci.h */
-struct hppa_dma_ops *hppa_dma_ops __read_mostly;
+struct dma_map_ops *hppa_dma_ops __read_mostly;
 EXPORT_SYMBOL(hppa_dma_ops);
 
 static struct device root = {
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index c5ef4081b01d..39127d3e70e5 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -502,21 +502,38 @@
 	STREG		\pte,0(\ptp)
 	.endm
 
+	/* We have (depending on the page size):
+	 * - 38 to 52-bit Physical Page Number
+	 * - 12 to 26-bit page offset
+	 */
 	/* bitshift difference between a PFN (based on kernel's PAGE_SIZE)
 	 * to a CPU TLB 4k PFN (4k => 12 bits to shift) */
-	#define PAGE_ADD_SHIFT  (PAGE_SHIFT-12)
+	#define PAGE_ADD_SHIFT		(PAGE_SHIFT-12)
+	#define PAGE_ADD_HUGE_SHIFT	(REAL_HPAGE_SHIFT-12)
 
 	/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
-	.macro		convert_for_tlb_insert20 pte
+	.macro		convert_for_tlb_insert20 pte,tmp
+#ifdef CONFIG_HUGETLB_PAGE
+	copy		\pte,\tmp
+	extrd,u		\tmp,(63-ASM_PFN_PTE_SHIFT)+(63-58)+PAGE_ADD_SHIFT,\
+				64-PAGE_SHIFT-PAGE_ADD_SHIFT,\pte
+
+	depdi		_PAGE_SIZE_ENCODING_DEFAULT,63,\
+				(63-58)+PAGE_ADD_SHIFT,\pte
+	extrd,u,*=	\tmp,_PAGE_HPAGE_BIT+32,1,%r0
+	depdi		_HUGE_PAGE_SIZE_ENCODING_DEFAULT,63,\
+				(63-58)+PAGE_ADD_HUGE_SHIFT,\pte
+#else /* Huge pages disabled */
 	extrd,u		\pte,(63-ASM_PFN_PTE_SHIFT)+(63-58)+PAGE_ADD_SHIFT,\
 				64-PAGE_SHIFT-PAGE_ADD_SHIFT,\pte
 	depdi		_PAGE_SIZE_ENCODING_DEFAULT,63,\
 				(63-58)+PAGE_ADD_SHIFT,\pte
+#endif
 	.endm
 
 	/* Convert the pte and prot to tlb insertion values.  How
 	 * this happens is quite subtle, read below */
-	.macro		make_insert_tlb	spc,pte,prot
+	.macro		make_insert_tlb	spc,pte,prot,tmp
 	space_to_prot   \spc \prot        /* create prot id from space */
 	/* The following is the real subtlety.  This is depositing
 	 * T <-> _PAGE_REFTRAP
@@ -553,7 +570,7 @@
 	depdi		1,12,1,\prot
 
 	/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
-	convert_for_tlb_insert20 \pte
+	convert_for_tlb_insert20 \pte \tmp
 	.endm
 
 	/* Identical macro to make_insert_tlb above, except it
@@ -646,17 +663,12 @@
 
 
 	/*
-	 * Align fault_vector_20 on 4K boundary so that both
-	 * fault_vector_11 and fault_vector_20 are on the
-	 * same page. This is only necessary as long as we
-	 * write protect the kernel text, which we may stop
-	 * doing once we use large page translations to cover
-	 * the static part of the kernel address space.
+	 * Fault_vectors are architecturally required to be aligned on a 2K
+	 * boundary
 	 */
 
 	.text
-
-	.align 4096
+	.align 2048
 
 ENTRY(fault_vector_20)
 	/* First vector is invalid (0) */
@@ -1147,7 +1159,7 @@ dtlb_miss_20w:
 	tlb_lock	spc,ptp,pte,t0,t1,dtlb_check_alias_20w
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 	
 	idtlbt          pte,prot
 
@@ -1173,7 +1185,7 @@ nadtlb_miss_20w:
 	tlb_lock	spc,ptp,pte,t0,t1,nadtlb_check_alias_20w
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 
 	idtlbt          pte,prot
 
@@ -1267,7 +1279,7 @@ dtlb_miss_20:
 	tlb_lock	spc,ptp,pte,t0,t1,dtlb_check_alias_20
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 
 	f_extend	pte,t1
 
@@ -1295,7 +1307,7 @@ nadtlb_miss_20:
 	tlb_lock	spc,ptp,pte,t0,t1,nadtlb_check_alias_20
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 
 	f_extend	pte,t1
 	
@@ -1404,7 +1416,7 @@ itlb_miss_20w:
 	tlb_lock	spc,ptp,pte,t0,t1,itlb_fault
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 	
 	iitlbt          pte,prot
 
@@ -1428,7 +1440,7 @@ naitlb_miss_20w:
 	tlb_lock	spc,ptp,pte,t0,t1,naitlb_check_alias_20w
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 
 	iitlbt          pte,prot
 
@@ -1514,7 +1526,7 @@ itlb_miss_20:
 	tlb_lock	spc,ptp,pte,t0,t1,itlb_fault
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 
 	f_extend	pte,t1
 
@@ -1534,7 +1546,7 @@ naitlb_miss_20:
 	tlb_lock	spc,ptp,pte,t0,t1,naitlb_check_alias_20
 	update_accessed	ptp,pte,t0,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 
 	f_extend	pte,t1
 
@@ -1566,7 +1578,7 @@ dbit_trap_20w:
 	tlb_lock	spc,ptp,pte,t0,t1,dbit_fault
 	update_dirty	ptp,pte,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 		
 	idtlbt          pte,prot
 
@@ -1610,7 +1622,7 @@ dbit_trap_20:
 	tlb_lock	spc,ptp,pte,t0,t1,dbit_fault
 	update_dirty	ptp,pte,t1
 
-	make_insert_tlb	spc,pte,prot
+	make_insert_tlb	spc,pte,prot,t1
 
 	f_extend	pte,t1
 	
@@ -1958,43 +1970,98 @@ pt_regs_ok:
 	b	intr_restore
 	copy	%r25,%r16
 
-	.import schedule,code
 syscall_do_resched:
-	BL	schedule,%r2
+	load32	syscall_check_resched,%r2 /* if resched, we start over again */
+	load32	schedule,%r19
+	bv	%r0(%r19)		/* jumps to schedule() */
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #else
 	nop
 #endif
-	b	syscall_check_resched	/* if resched, we start over again */
-	nop
 ENDPROC(syscall_exit)
 
 
 #ifdef CONFIG_FUNCTION_TRACER
+
 	.import ftrace_function_trampoline,code
-ENTRY(_mcount)
-	copy	%r3, %arg2
+	.align L1_CACHE_BYTES
+	.globl mcount
+	.type  mcount, @function
+ENTRY(mcount)
+_mcount:
+	.export _mcount,data
+	.proc
+	.callinfo caller,frame=0
+	.entry
+	/*
+	 * The 64bit mcount() function pointer needs 4 dwords, of which the
+	 * first two are free.  We optimize it here and put 2 instructions for
+	 * calling mcount(), and 2 instructions for ftrace_stub().  That way we
+	 * have all on one L1 cacheline.
+	 */
 	b	ftrace_function_trampoline
+	copy	%r3, %arg2	/* caller original %sp */
+ftrace_stub:
+	.globl ftrace_stub
+        .type  ftrace_stub, @function
+#ifdef CONFIG_64BIT
+	bve	(%rp)
+#else
+	bv	%r0(%rp)
+#endif
 	nop
-ENDPROC(_mcount)
+#ifdef CONFIG_64BIT
+	.dword mcount
+	.dword 0 /* code in head.S puts value of global gp here */
+#endif
+	.exit
+	.procend
+ENDPROC(mcount)
 
+	.align 8
+	.globl return_to_handler
+	.type  return_to_handler, @function
 ENTRY(return_to_handler)
-	load32	return_trampoline, %rp
-	copy	%ret0, %arg0
-	copy	%ret1, %arg1
-	b	ftrace_return_to_handler
-	nop
-return_trampoline:
-	copy	%ret0, %rp
-	copy	%r23, %ret0
-	copy	%r24, %ret1
+	.proc
+	.callinfo caller,frame=FRAME_SIZE
+	.entry
+	.export parisc_return_to_handler,data
+parisc_return_to_handler:
+	copy %r3,%r1
+	STREG %r0,-RP_OFFSET(%sp)	/* store 0 as %rp */
+	copy %sp,%r3
+	STREGM %r1,FRAME_SIZE(%sp)
+	STREG %ret0,8(%r3)
+	STREG %ret1,16(%r3)
 
-.globl ftrace_stub
-ftrace_stub:
+#ifdef CONFIG_64BIT
+	loadgp
+#endif
+
+	/* call ftrace_return_to_handler(0) */
+#ifdef CONFIG_64BIT
+	ldo -16(%sp),%ret1		/* Reference param save area */
+#endif
+	BL ftrace_return_to_handler,%r2
+	ldi 0,%r26
+	copy %ret0,%rp
+
+	/* restore original return values */
+	LDREG 8(%r3),%ret0
+	LDREG 16(%r3),%ret1
+
+	/* return from function */
+#ifdef CONFIG_64BIT
+	bve	(%rp)
+#else
 	bv	%r0(%rp)
-	nop
+#endif
+	LDREGM -FRAME_SIZE(%sp),%r3
+	.exit
+	.procend
 ENDPROC(return_to_handler)
+
 #endif	/* CONFIG_FUNCTION_TRACER */
 
 #ifdef CONFIG_IRQSTACKS
diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index 559d400f9385..b13f9ec6f294 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -1,6 +1,6 @@
 /*
  * Code for tracing calls in Linux kernel.
- * Copyright (C) 2009 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2009-2016 Helge Deller <deller@gmx.de>
  *
  * based on code for x86 which is:
  * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
@@ -13,104 +13,21 @@
 #include <linux/init.h>
 #include <linux/ftrace.h>
 
+#include <asm/assembly.h>
 #include <asm/sections.h>
 #include <asm/ftrace.h>
 
 
-
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
-/* Add a function return address to the trace stack on thread info.*/
-static int push_return_trace(unsigned long ret, unsigned long long time,
-				unsigned long func, int *depth)
-{
-	int index;
-
-	if (!current->ret_stack)
-		return -EBUSY;
-
-	/* The return trace stack is full */
-	if (current->curr_ret_stack == FTRACE_RETFUNC_DEPTH - 1) {
-		atomic_inc(&current->trace_overrun);
-		return -EBUSY;
-	}
-
-	index = ++current->curr_ret_stack;
-	barrier();
-	current->ret_stack[index].ret = ret;
-	current->ret_stack[index].func = func;
-	current->ret_stack[index].calltime = time;
-	*depth = index;
-
-	return 0;
-}
-
-/* Retrieve a function return address to the trace stack on thread info.*/
-static void pop_return_trace(struct ftrace_graph_ret *trace, unsigned long *ret)
-{
-	int index;
-
-	index = current->curr_ret_stack;
-
-	if (unlikely(index < 0)) {
-		ftrace_graph_stop();
-		WARN_ON(1);
-		/* Might as well panic, otherwise we have no where to go */
-		*ret = (unsigned long)
-			dereference_function_descriptor(&panic);
-		return;
-	}
-
-	*ret = current->ret_stack[index].ret;
-	trace->func = current->ret_stack[index].func;
-	trace->calltime = current->ret_stack[index].calltime;
-	trace->overrun = atomic_read(&current->trace_overrun);
-	trace->depth = index;
-	barrier();
-	current->curr_ret_stack--;
-
-}
-
-/*
- * Send the trace to the ring-buffer.
- * @return the original return address.
- */
-unsigned long ftrace_return_to_handler(unsigned long retval0,
-				       unsigned long retval1)
-{
-	struct ftrace_graph_ret trace;
-	unsigned long ret;
-
-	pop_return_trace(&trace, &ret);
-	trace.rettime = local_clock();
-	ftrace_graph_return(&trace);
-
-	if (unlikely(!ret)) {
-		ftrace_graph_stop();
-		WARN_ON(1);
-		/* Might as well panic. What else to do? */
-		ret = (unsigned long)
-			dereference_function_descriptor(&panic);
-	}
-
-	/* HACK: we hand over the old functions' return values
-	   in %r23 and %r24. Assembly in entry.S will take care
-	   and move those to their final registers %ret0 and %ret1 */
-	asm( "copy %0, %%r23 \n\t"
-	     "copy %1, %%r24 \n" : : "r" (retval0), "r" (retval1) );
-
-	return ret;
-}
-
 /*
  * Hook the return address and push it in the stack of return addrs
  * in current thread info.
  */
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
+static void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	unsigned long long calltime;
 	struct ftrace_graph_ent trace;
+	extern int parisc_return_to_handler;
 
 	if (unlikely(ftrace_graph_is_dead()))
 		return;
@@ -119,64 +36,47 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 
 	old = *parent;
-	*parent = (unsigned long)
-		  dereference_function_descriptor(&return_to_handler);
 
-	if (unlikely(!__kernel_text_address(old))) {
-		ftrace_graph_stop();
-		*parent = old;
-		WARN_ON(1);
-		return;
-	}
-
-	calltime = local_clock();
+	trace.func = self_addr;
+	trace.depth = current->curr_ret_stack + 1;
 
-	if (push_return_trace(old, calltime,
-				self_addr, &trace.depth) == -EBUSY) {
-		*parent = old;
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace))
 		return;
-	}
 
-	trace.func = self_addr;
+        if (ftrace_push_return_trace(old, self_addr, &trace.depth,
+			0 ) == -EBUSY)
+                return;
 
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		*parent = old;
-	}
+	/* activate parisc_return_to_handler() as return point */
+	*parent = (unsigned long) &parisc_return_to_handler;
 }
-
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
-
-void ftrace_function_trampoline(unsigned long parent,
+void notrace ftrace_function_trampoline(unsigned long parent,
 				unsigned long self_addr,
 				unsigned long org_sp_gr3)
 {
-	extern ftrace_func_t ftrace_trace_function;
+	extern ftrace_func_t ftrace_trace_function;  /* depends on CONFIG_DYNAMIC_FTRACE */
+	extern int ftrace_graph_entry_stub(struct ftrace_graph_ent *trace);
 
 	if (ftrace_trace_function != ftrace_stub) {
-		ftrace_trace_function(parent, self_addr);
+		/* struct ftrace_ops *op, struct pt_regs *regs); */
+		ftrace_trace_function(parent, self_addr, NULL, NULL);
 		return;
 	}
+
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	if (ftrace_graph_entry && ftrace_graph_return) {
-		unsigned long sp;
+	if (ftrace_graph_return != (trace_func_graph_ret_t) ftrace_stub ||
+		ftrace_graph_entry != ftrace_graph_entry_stub) {
 		unsigned long *parent_rp;
 
-                asm volatile ("copy %%r30, %0" : "=r"(sp));
-		/* sanity check: is stack pointer which we got from
-		   assembler function in entry.S in a reasonable
-		   range compared to current stack pointer? */
-		if ((sp - org_sp_gr3) > 0x400)
-			return;
-
 		/* calculate pointer to %rp in stack */
-		parent_rp = (unsigned long *) org_sp_gr3 - 0x10;
+		parent_rp = (unsigned long *) (org_sp_gr3 - RP_OFFSET);
 		/* sanity check: parent_rp should hold parent */
 		if (*parent_rp != parent)
 			return;
-		
+
 		prepare_ftrace_return(parent_rp, self_addr);
 		return;
 	}
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index e7d64527aff9..bbbe360b458f 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -69,7 +69,7 @@ $bss_loop:
 	stw,ma          %arg2,4(%r1)
 	stw,ma          %arg3,4(%r1)
 
-	/* Initialize startup VM. Just map first 8/16 MB of memory */
+	/* Initialize startup VM. Just map first 16/32 MB of memory */
 	load32		PA(swapper_pg_dir),%r4
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
@@ -107,7 +107,7 @@ $bss_loop:
 	/* Now initialize the PTEs themselves.  We use RWX for
 	 * everything ... it will get remapped correctly later */
 	ldo		0+_PAGE_KERNEL_RWX(%r0),%r3 /* Hardwired 0 phys addr start */
-	ldi		(1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */
+	load32		(1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */
 	load32		PA(pg0),%r1
 
 $pgt_fill_loop:
@@ -129,6 +129,15 @@ $pgt_fill_loop:
 	/* And the stack pointer too */
 	ldo             THREAD_SZ_ALGN(%r6),%sp
 
+#if defined(CONFIG_64BIT) && defined(CONFIG_FUNCTION_TRACER)
+	.import _mcount,data
+	/* initialize mcount FPTR */
+	/* Get the global data pointer */
+	loadgp
+	load32		PA(_mcount), %r10
+	std		%dp,0x18(%r10)
+#endif
+
 #ifdef CONFIG_SMP
 	/* Set the smp rendezvous address into page zero.
 	** It would be safer to do this in init_smp_config() but
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 3c63a820fcda..a0ecdb4abcc8 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -42,9 +42,9 @@
  *      We are not doing SEGREL32 handling correctly. According to the ABI, we
  *      should do a value offset, like this:
  *			if (in_init(me, (void *)val))
- *				val -= (uint32_t)me->module_init;
+ *				val -= (uint32_t)me->init_layout.base;
  *			else
- *				val -= (uint32_t)me->module_core;
+ *				val -= (uint32_t)me->core_layout.base;
  *	However, SEGREL32 is used only for PARISC unwind entries, and we want
  *	those entries to have an absolute address, and not just an offset.
  *
@@ -100,14 +100,14 @@
  * or init pieces the location is */
 static inline int in_init(struct module *me, void *loc)
 {
-	return (loc >= me->module_init &&
-		loc <= (me->module_init + me->init_size));
+	return (loc >= me->init_layout.base &&
+		loc <= (me->init_layout.base + me->init_layout.size));
 }
 
 static inline int in_core(struct module *me, void *loc)
 {
-	return (loc >= me->module_core &&
-		loc <= (me->module_core + me->core_size));
+	return (loc >= me->core_layout.base &&
+		loc <= (me->core_layout.base + me->core_layout.size));
 }
 
 static inline int in_local(struct module *me, void *loc)
@@ -367,13 +367,13 @@ int module_frob_arch_sections(CONST Elf_Ehdr *hdr,
 	}
 
 	/* align things a bit */
-	me->core_size = ALIGN(me->core_size, 16);
-	me->arch.got_offset = me->core_size;
-	me->core_size += gots * sizeof(struct got_entry);
+	me->core_layout.size = ALIGN(me->core_layout.size, 16);
+	me->arch.got_offset = me->core_layout.size;
+	me->core_layout.size += gots * sizeof(struct got_entry);
 
-	me->core_size = ALIGN(me->core_size, 16);
-	me->arch.fdesc_offset = me->core_size;
-	me->core_size += fdescs * sizeof(Elf_Fdesc);
+	me->core_layout.size = ALIGN(me->core_layout.size, 16);
+	me->arch.fdesc_offset = me->core_layout.size;
+	me->core_layout.size += fdescs * sizeof(Elf_Fdesc);
 
 	me->arch.got_max = gots;
 	me->arch.fdesc_max = fdescs;
@@ -391,7 +391,7 @@ static Elf64_Word get_got(struct module *me, unsigned long value, long addend)
 
 	BUG_ON(value == 0);
 
-	got = me->module_core + me->arch.got_offset;
+	got = me->core_layout.base + me->arch.got_offset;
 	for (i = 0; got[i].addr; i++)
 		if (got[i].addr == value)
 			goto out;
@@ -409,7 +409,7 @@ static Elf64_Word get_got(struct module *me, unsigned long value, long addend)
 #ifdef CONFIG_64BIT
 static Elf_Addr get_fdesc(struct module *me, unsigned long value)
 {
-	Elf_Fdesc *fdesc = me->module_core + me->arch.fdesc_offset;
+	Elf_Fdesc *fdesc = me->core_layout.base + me->arch.fdesc_offset;
 
 	if (!value) {
 		printk(KERN_ERR "%s: zero OPD requested!\n", me->name);
@@ -427,7 +427,7 @@ static Elf_Addr get_fdesc(struct module *me, unsigned long value)
 
 	/* Create new one */
 	fdesc->addr = value;
-	fdesc->gp = (Elf_Addr)me->module_core + me->arch.got_offset;
+	fdesc->gp = (Elf_Addr)me->core_layout.base + me->arch.got_offset;
 	return (Elf_Addr)fdesc;
 }
 #endif /* CONFIG_64BIT */
@@ -660,6 +660,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			}
 			*loc = (*loc & ~0x3ff1ffd) | reassemble_22(val);
 			break;
+		case R_PARISC_PCREL32:
+			/* 32-bit PC relative address */
+			*loc = val - dot - 8 + addend;
+			break;
 
 		default:
 			printk(KERN_ERR "module %s: Unknown relocation: %u\n",
@@ -788,6 +792,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			CHECK_RELOC(val, 22);
 			*loc = (*loc & ~0x3ff1ffd) | reassemble_22(val);
 			break;
+		case R_PARISC_PCREL32:
+			/* 32-bit PC relative address */
+			*loc = val - dot - 8 + addend;
+			break;
 		case R_PARISC_DIR64:
 			/* 64-bit effective address */
 			*loc64 = val + addend;
@@ -839,7 +847,7 @@ register_unwind_table(struct module *me,
 
 	table = (unsigned char *)sechdrs[me->arch.unwind_section].sh_addr;
 	end = table + sechdrs[me->arch.unwind_section].sh_size;
-	gp = (Elf_Addr)me->module_core + me->arch.got_offset;
+	gp = (Elf_Addr)me->core_layout.base + me->arch.got_offset;
 
 	DEBUGP("register_unwind_table(), sect = %d at 0x%p - 0x%p (gp=0x%lx)\n",
 	       me->arch.unwind_section, table, end, gp);
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 568b2c61ea02..3cad8aadc69e 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -47,11 +47,11 @@ EXPORT_SYMBOL(__cmpxchg_u64);
 EXPORT_SYMBOL(lclear_user);
 EXPORT_SYMBOL(lstrnlen_user);
 
-/* Global fixups */
-extern void fixup_get_user_skip_1(void);
-extern void fixup_get_user_skip_2(void);
-extern void fixup_put_user_skip_1(void);
-extern void fixup_put_user_skip_2(void);
+/* Global fixups - defined as int to avoid creation of function pointers */
+extern int fixup_get_user_skip_1;
+extern int fixup_get_user_skip_2;
+extern int fixup_put_user_skip_1;
+extern int fixup_put_user_skip_2;
 EXPORT_SYMBOL(fixup_get_user_skip_1);
 EXPORT_SYMBOL(fixup_get_user_skip_2);
 EXPORT_SYMBOL(fixup_put_user_skip_1);
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index b9402c9b3454..a27e4928bf73 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -413,7 +413,8 @@ pcxl_dma_init(void)
 
 __initcall(pcxl_dma_init);
 
-static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag)
+static void *pa11_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t flag, struct dma_attrs *attrs)
 {
 	unsigned long vaddr;
 	unsigned long paddr;
@@ -439,7 +440,8 @@ static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_ad
 	return (void *)vaddr;
 }
 
-static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle)
+static void pa11_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, struct dma_attrs *attrs)
 {
 	int order;
 
@@ -450,15 +452,20 @@ static void pa11_dma_free_consistent (struct device *dev, size_t size, void *vad
 	free_pages((unsigned long)__va(dma_handle), order);
 }
 
-static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction)
+static dma_addr_t pa11_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size,
+		enum dma_data_direction direction, struct dma_attrs *attrs)
 {
+	void *addr = page_address(page) + offset;
 	BUG_ON(direction == DMA_NONE);
 
 	flush_kernel_dcache_range((unsigned long) addr, size);
 	return virt_to_phys(addr);
 }
 
-static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
+static void pa11_dma_unmap_page(struct device *dev, dma_addr_t dma_handle,
+		size_t size, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	BUG_ON(direction == DMA_NONE);
 
@@ -475,7 +482,9 @@ static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, siz
 	return;
 }
 
-static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction direction)
+static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 	struct scatterlist *sg;
@@ -492,7 +501,9 @@ static int pa11_dma_map_sg(struct device *dev, struct scatterlist *sglist, int n
 	return nents;
 }
 
-static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction direction)
+static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 	struct scatterlist *sg;
@@ -509,18 +520,24 @@ static void pa11_dma_unmap_sg(struct device *dev, struct scatterlist *sglist, in
 	return;
 }
 
-static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
+static void pa11_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
 {
 	BUG_ON(direction == DMA_NONE);
 
-	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
+	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle),
+			size);
 }
 
-static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
+static void pa11_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
 {
 	BUG_ON(direction == DMA_NONE);
 
-	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
+	flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle),
+			size);
 }
 
 static void pa11_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sglist, int nents, enum dma_data_direction direction)
@@ -545,32 +562,28 @@ static void pa11_dma_sync_sg_for_device(struct device *dev, struct scatterlist *
 		flush_kernel_vmap_range(sg_virt(sg), sg->length);
 }
 
-struct hppa_dma_ops pcxl_dma_ops = {
+struct dma_map_ops pcxl_dma_ops = {
 	.dma_supported =	pa11_dma_supported,
-	.alloc_consistent =	pa11_dma_alloc_consistent,
-	.alloc_noncoherent =	pa11_dma_alloc_consistent,
-	.free_consistent =	pa11_dma_free_consistent,
-	.map_single =		pa11_dma_map_single,
-	.unmap_single =		pa11_dma_unmap_single,
+	.alloc =		pa11_dma_alloc,
+	.free =			pa11_dma_free,
+	.map_page =		pa11_dma_map_page,
+	.unmap_page =		pa11_dma_unmap_page,
 	.map_sg =		pa11_dma_map_sg,
 	.unmap_sg =		pa11_dma_unmap_sg,
-	.dma_sync_single_for_cpu = pa11_dma_sync_single_for_cpu,
-	.dma_sync_single_for_device = pa11_dma_sync_single_for_device,
-	.dma_sync_sg_for_cpu = pa11_dma_sync_sg_for_cpu,
-	.dma_sync_sg_for_device = pa11_dma_sync_sg_for_device,
+	.sync_single_for_cpu =	pa11_dma_sync_single_for_cpu,
+	.sync_single_for_device = pa11_dma_sync_single_for_device,
+	.sync_sg_for_cpu =	pa11_dma_sync_sg_for_cpu,
+	.sync_sg_for_device =	pa11_dma_sync_sg_for_device,
 };
 
-static void *fail_alloc_consistent(struct device *dev, size_t size,
-				   dma_addr_t *dma_handle, gfp_t flag)
-{
-	return NULL;
-}
-
-static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
-					  dma_addr_t *dma_handle, gfp_t flag)
+static void *pcx_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t flag, struct dma_attrs *attrs)
 {
 	void *addr;
 
+	if (!dma_get_attr(DMA_ATTR_NON_CONSISTENT, attrs))
+		return NULL;
+
 	addr = (void *)__get_free_pages(flag, get_order(size));
 	if (addr)
 		*dma_handle = (dma_addr_t)virt_to_phys(addr);
@@ -578,24 +591,23 @@ static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
 	return addr;
 }
 
-static void pa11_dma_free_noncoherent(struct device *dev, size_t size,
-					void *vaddr, dma_addr_t iova)
+static void pcx_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t iova, struct dma_attrs *attrs)
 {
 	free_pages((unsigned long)vaddr, get_order(size));
 	return;
 }
 
-struct hppa_dma_ops pcx_dma_ops = {
+struct dma_map_ops pcx_dma_ops = {
 	.dma_supported =	pa11_dma_supported,
-	.alloc_consistent =	fail_alloc_consistent,
-	.alloc_noncoherent =	pa11_dma_alloc_noncoherent,
-	.free_consistent =	pa11_dma_free_noncoherent,
-	.map_single =		pa11_dma_map_single,
-	.unmap_single =		pa11_dma_unmap_single,
+	.alloc =		pcx_dma_alloc,
+	.free =			pcx_dma_free,
+	.map_page =		pa11_dma_map_page,
+	.unmap_page =		pa11_dma_unmap_page,
 	.map_sg =		pa11_dma_map_sg,
 	.unmap_sg =		pa11_dma_unmap_sg,
-	.dma_sync_single_for_cpu =	pa11_dma_sync_single_for_cpu,
-	.dma_sync_single_for_device =	pa11_dma_sync_single_for_device,
-	.dma_sync_sg_for_cpu =		pa11_dma_sync_sg_for_cpu,
-	.dma_sync_sg_for_device =	pa11_dma_sync_sg_for_device,
+	.sync_single_for_cpu =	pa11_dma_sync_single_for_cpu,
+	.sync_single_for_device = pa11_dma_sync_single_for_device,
+	.sync_sg_for_cpu =	pa11_dma_sync_sg_for_cpu,
+	.sync_sg_for_device =	pa11_dma_sync_sg_for_device,
 };
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 64f2764a8cef..0903c6abd7a4 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -170,23 +170,31 @@ void pcibios_set_master(struct pci_dev *dev)
 			      (0x80 << 8) | pci_cache_line_size);
 }
 
-
-void __init pcibios_init_bus(struct pci_bus *bus)
+/*
+ * pcibios_init_bridge() initializes cache line and default latency
+ * for pci controllers and pci-pci bridges
+ */
+void __init pcibios_init_bridge(struct pci_dev *dev)
 {
-	struct pci_dev *dev = bus->self;
-	unsigned short bridge_ctl;
+	unsigned short bridge_ctl, bridge_ctl_new;
 
 	/* We deal only with pci controllers and pci-pci bridges. */
 	if (!dev || (dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 		return;
 
 	/* PCI-PCI bridge - set the cache line and default latency
-	   (32) for primary and secondary buses. */
+	 * (32) for primary and secondary buses.
+	 */
 	pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 32);
 
 	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bridge_ctl);
-	bridge_ctl |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
-	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl);
+
+	bridge_ctl_new = bridge_ctl | PCI_BRIDGE_CTL_PARITY |
+		PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_MASTER_ABORT;
+	dev_info(&dev->dev, "Changing bridge control from 0x%08x to 0x%08x\n",
+		bridge_ctl, bridge_ctl_new);
+
+	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bridge_ctl_new);
 }
 
 /*
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index b68d977ce30f..e81ccf1716e9 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -44,6 +44,10 @@
 
 struct system_cpuinfo_parisc boot_cpu_data __read_mostly;
 EXPORT_SYMBOL(boot_cpu_data);
+#ifdef CONFIG_PA8X00
+int _parisc_requires_coherency __read_mostly;
+EXPORT_SYMBOL(_parisc_requires_coherency);
+#endif
 
 DEFINE_PER_CPU(struct cpuinfo_parisc, cpu_data);
 
@@ -277,8 +281,12 @@ void __init collect_boot_cpu_data(void)
 	boot_cpu_data.cpu_type = parisc_get_cpu_type(boot_cpu_data.hversion);
 	boot_cpu_data.cpu_name = cpu_name_version[boot_cpu_data.cpu_type][0];
 	boot_cpu_data.family_name = cpu_name_version[boot_cpu_data.cpu_type][1];
-}
 
+#ifdef CONFIG_PA8X00
+	_parisc_requires_coherency = (boot_cpu_data.cpu_type == mako) ||
+				(boot_cpu_data.cpu_type == mako2);
+#endif
+}
 
 
 /**
diff --git a/arch/parisc/kernel/ptrace.c b/arch/parisc/kernel/ptrace.c
index 9585c81f755f..8fb81a391599 100644
--- a/arch/parisc/kernel/ptrace.c
+++ b/arch/parisc/kernel/ptrace.c
@@ -269,14 +269,20 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	long ret = 0;
-
 	/* Do the secure computing check first. */
-	secure_computing_strict(regs->gr[20]);
+	if (secure_computing() == -1)
+		return -1;
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(regs))
-		ret = -1L;
+	    tracehook_report_syscall_entry(regs)) {
+		/*
+		 * Tracing decided this syscall should not happen or the
+		 * debugger stored an invalid system call number. Skip
+		 * the system call and the system call restart handling.
+		 */
+		regs->gr[20] = -1UL;
+		goto out;
+	}
 
 #ifdef CONFIG_64BIT
 	if (!is_compat_task())
@@ -290,7 +296,12 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 			regs->gr[24] & 0xffffffff,
 			regs->gr[23] & 0xffffffff);
 
-	return ret ? : regs->gr[20];
+out:
+	/*
+	 * Sign extend the syscall number to 64bit since it may have been
+	 * modified by a compat ptrace call
+	 */
+	return (int) ((u32) regs->gr[20]);
 }
 
 void do_syscall_trace_exit(struct pt_regs *regs)
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 72a3c658ad7b..f7ea626e29c9 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -130,7 +130,16 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "The 32-bit Kernel has started...\n");
 #endif
 
-	printk(KERN_INFO "Default page size is %dKB.\n", (int)(PAGE_SIZE / 1024));
+	printk(KERN_INFO "Kernel default page size is %d KB. Huge pages ",
+		(int)(PAGE_SIZE / 1024));
+#ifdef CONFIG_HUGETLB_PAGE
+	printk(KERN_CONT "enabled with %d MB physical and %d MB virtual size",
+		 1 << (REAL_HPAGE_SHIFT - 20), 1 << (HPAGE_SHIFT - 20));
+#else
+	printk(KERN_CONT "disabled");
+#endif
+	printk(KERN_CONT ".\n");
+
 
 	pdc_console_init();
 
@@ -377,6 +386,7 @@ arch_initcall(parisc_init);
 void start_parisc(void)
 {
 	extern void start_kernel(void);
+	extern void early_trap_init(void);
 
 	int ret, cpunum;
 	struct pdc_coproc_cfg coproc_cfg;
@@ -397,6 +407,8 @@ void start_parisc(void)
 		panic("must have an fpu to boot linux");
 	}
 
+	early_trap_init(); /* initialize checksum of fault_vector */
+
 	start_kernel();
 	// not reached
 }
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index dc1ea796fd60..2264f68f3c2f 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -435,6 +435,55 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs, int in_syscall)
 		regs->gr[28]);
 }
 
+/*
+ * Check how the syscall number gets loaded into %r20 within
+ * the delay branch in userspace and adjust as needed.
+ */
+
+static void check_syscallno_in_delay_branch(struct pt_regs *regs)
+{
+	u32 opcode, source_reg;
+	u32 __user *uaddr;
+	int err;
+
+	/* Usually we don't have to restore %r20 (the system call number)
+	 * because it gets loaded in the delay slot of the branch external
+	 * instruction via the ldi instruction.
+	 * In some cases a register-to-register copy instruction might have
+	 * been used instead, in which case we need to copy the syscall
+	 * number into the source register before returning to userspace.
+	 */
+
+	/* A syscall is just a branch, so all we have to do is fiddle the
+	 * return pointer so that the ble instruction gets executed again.
+	 */
+	regs->gr[31] -= 8; /* delayed branching */
+
+	/* Get assembler opcode of code in delay branch */
+	uaddr = (unsigned int *) ((regs->gr[31] & ~3) + 4);
+	err = get_user(opcode, uaddr);
+	if (err)
+		return;
+
+	/* Check if delay branch uses "ldi int,%r20" */
+	if ((opcode & 0xffff0000) == 0x34140000)
+		return;	/* everything ok, just return */
+
+	/* Check if delay branch uses "nop" */
+	if (opcode == INSN_NOP)
+		return;
+
+	/* Check if delay branch uses "copy %rX,%r20" */
+	if ((opcode & 0xffe0ffff) == 0x08000254) {
+		source_reg = (opcode >> 16) & 31;
+		regs->gr[source_reg] = regs->gr[20];
+		return;
+	}
+
+	pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n",
+		current->comm, task_pid_nr(current), opcode);
+}
+
 static inline void
 syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 {
@@ -457,10 +506,7 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 		}
 		/* fallthrough */
 	case -ERESTARTNOINTR:
-		/* A syscall is just a branch, so all
-		 * we have to do is fiddle the return pointer.
-		 */
-		regs->gr[31] -= 8; /* delayed branching */
+		check_syscallno_in_delay_branch(regs);
 		break;
 	}
 }
@@ -510,15 +556,9 @@ insert_restart_trampoline(struct pt_regs *regs)
 	}
 	case -ERESTARTNOHAND:
 	case -ERESTARTSYS:
-	case -ERESTARTNOINTR: {
-		/* Hooray for delayed branching.  We don't
-		 * have to restore %r20 (the system call
-		 * number) because it gets loaded in the delay
-		 * slot of the branch external instruction.
-		 */
-		regs->gr[31] -= 8;
+	case -ERESTARTNOINTR:
+		check_syscallno_in_delay_branch(regs);
 		return;
-	}
 	default:
 		break;
 	}
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index 984abbee71ca..c342b2e17492 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -371,6 +371,11 @@ copy_siginfo_to_user32 (compat_siginfo_t __user *to, const siginfo_t *from)
 			val = (compat_int_t)from->si_int;
 			err |= __put_user(val, &to->si_int);
 			break;
+		case __SI_SYS >> 16:
+			err |= __put_user(ptr_to_compat(from->si_call_addr), &to->si_call_addr);
+			err |= __put_user(from->si_syscall, &to->si_syscall);
+			err |= __put_user(from->si_arch, &to->si_arch);
+			break;
 		}
 	}
 	return err;
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 52e85973a283..c2a9cc55a62f 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -305,7 +305,7 @@ void __init smp_callin(void)
 
 	local_irq_enable();  /* Interrupts have been off until now */
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 
 	/* NOTREACHED */
 	panic("smp_callin() AAAAaaaaahhhh....\n");
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index 5aba01ac457f..0a393a04e891 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -368,16 +368,6 @@ asmlinkage long parisc_fallocate(int fd, int mode, u32 offhi, u32 offlo,
                              ((u64)lenhi << 32) | lenlo);
 }
 
-asmlinkage unsigned long sys_alloc_hugepages(int key, unsigned long addr, unsigned long len, int prot, int flag)
-{
-	return -ENOMEM;
-}
-
-asmlinkage int sys_free_hugepages(unsigned long addr)
-{
-	return -EINVAL;
-}
-
 long parisc_personality(unsigned long personality)
 {
 	long err;
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 0b8d26d3ba43..c976ebfe2269 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -329,6 +329,7 @@ tracesys_next:
 
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	TI_TASK(%r1), %r1
+	LDREG   TASK_PT_GR28(%r1), %r28		/* Restore return value */
 	LDREG   TASK_PT_GR26(%r1), %r26		/* Restore the users args */
 	LDREG   TASK_PT_GR25(%r1), %r25
 	LDREG   TASK_PT_GR24(%r1), %r24
@@ -342,8 +343,9 @@ tracesys_next:
 	stw     %r21, -56(%r30)                 /* 6th argument */
 #endif
 
+	cmpib,COND(=),n -1,%r20,tracesys_exit /* seccomp may have returned -1 */
 	comiclr,>>=	__NR_Linux_syscalls, %r20, %r0
-	b,n	.Lsyscall_nosys
+	b,n	.Ltracesys_nosys
 
 	LDREGX  %r20(%r19), %r19
 
@@ -359,6 +361,9 @@ tracesys_next:
 	be      0(%sr7,%r19)
 	ldo	R%tracesys_exit(%r2),%r2
 
+.Ltracesys_nosys:
+	ldo	-ENOSYS(%r0),%r28		/* set errno */
+
 	/* Do *not* call this function on the gateway page, because it
 	makes a direct call to syscall_trace. */
 	
@@ -369,7 +374,7 @@ tracesys_exit:
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
 	ldo	TASK_REGS(%r1),%r26
-	bl	do_syscall_trace_exit,%r2
+	BL	do_syscall_trace_exit,%r2
 	STREG   %r28,TASK_PT_GR28(%r1)          /* save return value now */
 	ldo     -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1      /* get task ptr */
 	LDREG	TI_TASK(%r1), %r1
@@ -390,7 +395,7 @@ tracesys_sigexit:
 #ifdef CONFIG_64BIT
 	ldo	-16(%r30),%r29			/* Reference param save area */
 #endif
-	bl	do_syscall_trace_exit,%r2
+	BL	do_syscall_trace_exit,%r2
 	ldo	TASK_REGS(%r1),%r26
 
 	ldil	L%syscall_exit_rfi,%r1
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 78c3ef8c348d..3cfef1de8061 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -315,8 +315,8 @@
 	ENTRY_COMP(io_getevents)
 	ENTRY_COMP(io_submit)
 	ENTRY_SAME(io_cancel)
-	ENTRY_SAME(alloc_hugepages)	/* 220 */
-	ENTRY_SAME(free_hugepages)
+	ENTRY_SAME(ni_syscall)		/* 220: was alloc_hugepages */
+	ENTRY_SAME(ni_syscall)		/* was free_hugepages */
 	ENTRY_SAME(exit_group)
 	ENTRY_COMP(lookup_dcookie)
 	ENTRY_SAME(epoll_create)
@@ -440,6 +440,10 @@
 	ENTRY_COMP(execveat)
 	ENTRY_SAME(membarrier)
 	ENTRY_SAME(userfaultfd)
+	ENTRY_SAME(mlock2)		/* 345 */
+	ENTRY_SAME(copy_file_range)
+	ENTRY_COMP(preadv2)
+	ENTRY_COMP(pwritev2)
 
 
 .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index b99b39f1da02..97d6b208e129 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -284,11 +284,8 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err)
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
 
-	if (panic_on_oops) {
-		printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
-		ssleep(5);
+	if (panic_on_oops)
 		panic("Fatal exception");
-	}
 
 	oops_exit();
 	do_exit(SIGSEGV);
@@ -798,6 +795,9 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 
 	    if (fault_space == 0 && !faulthandler_disabled())
 	    {
+		/* Clean up and return if in exception table. */
+		if (fixup_exception(regs))
+			return;
 		pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC);
 		parisc_terminate("Kernel Fault", regs, code, fault_address);
 	    }
@@ -807,7 +807,7 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 }
 
 
-int __init check_ivt(void *iva)
+void __init initialize_ivt(const void *iva)
 {
 	extern u32 os_hpmc_size;
 	extern const u32 os_hpmc[];
@@ -818,8 +818,8 @@ int __init check_ivt(void *iva)
 	u32 *hpmcp;
 	u32 length;
 
-	if (strcmp((char *)iva, "cows can fly"))
-		return -1;
+	if (strcmp((const char *)iva, "cows can fly"))
+		panic("IVT invalid");
 
 	ivap = (u32 *)iva;
 
@@ -839,28 +839,23 @@ int __init check_ivt(void *iva)
 	    check += ivap[i];
 
 	ivap[5] = -check;
-
-	return 0;
 }
 	
-#ifndef CONFIG_64BIT
-extern const void fault_vector_11;
-#endif
-extern const void fault_vector_20;
 
-void __init trap_init(void)
+/* early_trap_init() is called before we set up kernel mappings and
+ * write-protect the kernel */
+void  __init early_trap_init(void)
 {
-	void *iva;
+	extern const void fault_vector_20;
 
-	if (boot_cpu_data.cpu_type >= pcxu)
-		iva = (void *) &fault_vector_20;
-	else
-#ifdef CONFIG_64BIT
-		panic("Can't boot 64-bit OS on PA1.1 processor!");
-#else
-		iva = (void *) &fault_vector_11;
+#ifndef CONFIG_64BIT
+	extern const void fault_vector_11;
+	initialize_ivt(&fault_vector_11);
 #endif
 
-	if (check_ivt(iva))
-		panic("IVT invalid");
+	initialize_ivt(&fault_vector_20);
+}
+
+void __init trap_init(void)
+{
 }
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 0dacc5ca555a..f3ead0b6ce46 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -60,7 +60,7 @@ SECTIONS
 		EXIT_DATA
 	}
 	PERCPU_SECTION(8)
-	. = ALIGN(PAGE_SIZE);
+	. = ALIGN(HUGEPAGE_SIZE);
 	__init_end = .;
 	/* freed after init ends here */
 
@@ -72,6 +72,7 @@ SECTIONS
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.text.do_softirq)
 		*(.text.sys_exit)
 		*(.text.do_sigaltstack)
@@ -116,7 +117,7 @@ SECTIONS
 	 * that we can properly leave these
 	 * as writable
 	 */
-	. = ALIGN(PAGE_SIZE);
+	. = ALIGN(HUGEPAGE_SIZE);
 	data_start = .;
 
 	EXCEPTION_TABLE(8)
@@ -135,8 +136,11 @@ SECTIONS
 	_edata = .;
 
 	/* BSS */
-	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8)
+	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE)
+
+	/* bootmap is allocated in setup_bootmem() directly behind bss. */
 
+	. = ALIGN(HUGEPAGE_SIZE);
 	_end = . ;
 
 	STABS_DEBUG
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 536ef66bb94b..1052b747e011 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -26,6 +26,7 @@
 
 #ifdef CONFIG_SMP
 	.macro  get_fault_ip t1 t2
+	loadgp
 	addil LT%__per_cpu_offset,%r27
 	LDREG RT%__per_cpu_offset(%r1),\t1
 	/* t2 = smp_processor_id() */
@@ -40,14 +41,19 @@
 	LDREG RT%exception_data(%r1),\t1
 	/* t1 = this_cpu_ptr(&exception_data) */
 	add,l \t1,\t2,\t1
+	/* %r27 = t1->fault_gp - restore gp */
+	LDREG EXCDATA_GP(\t1), %r27
 	/* t1 = t1->fault_ip */
 	LDREG EXCDATA_IP(\t1), \t1
 	.endm
 #else
 	.macro  get_fault_ip t1 t2
+	loadgp
 	/* t1 = this_cpu_ptr(&exception_data) */
 	addil LT%exception_data,%r27
 	LDREG RT%exception_data(%r1),\t2
+	/* %r27 = t2->fault_gp - restore gp */
+	LDREG EXCDATA_GP(\t2), %r27
 	/* t1 = t2->fault_ip */
 	LDREG EXCDATA_IP(\t2), \t1
 	.endm
diff --git a/arch/parisc/mm/Makefile b/arch/parisc/mm/Makefile
index 758ceefb373a..134393de69d2 100644
--- a/arch/parisc/mm/Makefile
+++ b/arch/parisc/mm/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-y	 := init.o fault.o ioremap.o
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index a762864ec92e..16dbe81c97c9 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -140,21 +140,17 @@ int fixup_exception(struct pt_regs *regs)
 {
 	const struct exception_table_entry *fix;
 
-	/* If we only stored 32bit addresses in the exception table we can drop
-	 * out if we faulted on a 64bit address. */
-	if ((sizeof(regs->iaoq[0]) > sizeof(fix->insn))
-		&& (regs->iaoq[0] >> 32))
-			return 0;
-
 	fix = search_exception_tables(regs->iaoq[0]);
 	if (fix) {
 		struct exception_data *d;
 		d = this_cpu_ptr(&exception_data);
 		d->fault_ip = regs->iaoq[0];
+		d->fault_gp = regs->gr[27];
 		d->fault_space = regs->isr;
 		d->fault_addr = regs->ior;
 
-		regs->iaoq[0] = ((fix->fixup) & ~3);
+		regs->iaoq[0] = (unsigned long)&fix->fixup + fix->fixup;
+		regs->iaoq[0] &= ~3;
 		/*
 		 * NOTE: In some cases the faulting instruction
 		 * may be in the delay slot of a branch. We
diff --git a/arch/parisc/mm/hugetlbpage.c b/arch/parisc/mm/hugetlbpage.c
new file mode 100644
index 000000000000..5d6eea925cf4
--- /dev/null
+++ b/arch/parisc/mm/hugetlbpage.c
@@ -0,0 +1,197 @@
+/*
+ * PARISC64 Huge TLB page support.
+ *
+ * This parisc implementation is heavily based on the SPARC and x86 code.
+ *
+ * Copyright (C) 2015 Helge Deller <deller@gmx.de>
+ */
+
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/sysctl.h>
+
+#include <asm/mman.h>
+#include <asm/pgalloc.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+
+
+unsigned long
+hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+		unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+	struct hstate *h = hstate_file(file);
+
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (len > TASK_SIZE)
+		return -ENOMEM;
+
+	if (flags & MAP_FIXED)
+		if (prepare_hugepage_range(file, addr, len))
+			return -EINVAL;
+
+	if (addr)
+		addr = ALIGN(addr, huge_page_size(h));
+
+	/* we need to make sure the colouring is OK */
+	return arch_get_unmapped_area(file, addr, len, pgoff, flags);
+}
+
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte = NULL;
+
+	/* We must align the address, because our caller will run
+	 * set_huge_pte_at() on whatever we return, which writes out
+	 * all of the sub-ptes for the hugepage range.  So we have
+	 * to give it the first such sub-pte.
+	 */
+	addr &= HPAGE_MASK;
+
+	pgd = pgd_offset(mm, addr);
+	pud = pud_alloc(mm, pgd, addr);
+	if (pud) {
+		pmd = pmd_alloc(mm, pud, addr);
+		if (pmd)
+			pte = pte_alloc_map(mm, pmd, addr);
+	}
+	return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte = NULL;
+
+	addr &= HPAGE_MASK;
+
+	pgd = pgd_offset(mm, addr);
+	if (!pgd_none(*pgd)) {
+		pud = pud_offset(pgd, addr);
+		if (!pud_none(*pud)) {
+			pmd = pmd_offset(pud, addr);
+			if (!pmd_none(*pmd))
+				pte = pte_offset_map(pmd, addr);
+		}
+	}
+	return pte;
+}
+
+/* Purge data and instruction TLB entries.  Must be called holding
+ * the pa_tlb_lock.  The TLB purge instructions are slow on SMP
+ * machines since the purge must be broadcast to all CPUs.
+ */
+static inline void purge_tlb_entries_huge(struct mm_struct *mm, unsigned long addr)
+{
+	int i;
+
+	/* We may use multiple physical huge pages (e.g. 2x1 MB) to emulate
+	 * Linux standard huge pages (e.g. 2 MB) */
+	BUILD_BUG_ON(REAL_HPAGE_SHIFT > HPAGE_SHIFT);
+
+	addr &= HPAGE_MASK;
+	addr |= _HUGE_PAGE_SIZE_ENCODING_DEFAULT;
+
+	for (i = 0; i < (1 << (HPAGE_SHIFT-REAL_HPAGE_SHIFT)); i++) {
+		purge_tlb_entries(mm, addr);
+		addr += (1UL << REAL_HPAGE_SHIFT);
+	}
+}
+
+/* __set_huge_pte_at() must be called holding the pa_tlb_lock. */
+static void __set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t entry)
+{
+	unsigned long addr_start;
+	int i;
+
+	addr &= HPAGE_MASK;
+	addr_start = addr;
+
+	for (i = 0; i < (1 << HUGETLB_PAGE_ORDER); i++) {
+		set_pte(ptep, entry);
+		ptep++;
+
+		addr += PAGE_SIZE;
+		pte_val(entry) += PAGE_SIZE;
+	}
+
+	purge_tlb_entries_huge(mm, addr_start);
+}
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t entry)
+{
+	unsigned long flags;
+
+	purge_tlb_start(flags);
+	__set_huge_pte_at(mm, addr, ptep, entry);
+	purge_tlb_end(flags);
+}
+
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep)
+{
+	unsigned long flags;
+	pte_t entry;
+
+	purge_tlb_start(flags);
+	entry = *ptep;
+	__set_huge_pte_at(mm, addr, ptep, __pte(0));
+	purge_tlb_end(flags);
+
+	return entry;
+}
+
+
+void huge_ptep_set_wrprotect(struct mm_struct *mm,
+				unsigned long addr, pte_t *ptep)
+{
+	unsigned long flags;
+	pte_t old_pte;
+
+	purge_tlb_start(flags);
+	old_pte = *ptep;
+	__set_huge_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+	purge_tlb_end(flags);
+}
+
+int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+				unsigned long addr, pte_t *ptep,
+				pte_t pte, int dirty)
+{
+	unsigned long flags;
+	int changed;
+
+	purge_tlb_start(flags);
+	changed = !pte_same(*ptep, pte);
+	if (changed) {
+		__set_huge_pte_at(vma->vm_mm, addr, ptep, pte);
+	}
+	purge_tlb_end(flags);
+	return changed;
+}
+
+
+int pmd_huge(pmd_t pmd)
+{
+	return 0;
+}
+
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index c229427fa546..6b3e7c6ee096 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -22,7 +22,8 @@
 #include <linux/swap.h>
 #include <linux/unistd.h>
 #include <linux/nodemask.h>	/* for node_online_map */
-#include <linux/pagemap.h>	/* for release_pages and page_cache_release */
+#include <linux/pagemap.h>	/* for release_pages */
+#include <linux/compat.h>
 
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
@@ -30,6 +31,7 @@
 #include <asm/pdc_chassis.h>
 #include <asm/mmzone.h>
 #include <asm/sections.h>
+#include <asm/msgbuf.h>
 
 extern int  data_start;
 extern void parisc_kernel_start(void);	/* Kernel entry point in head.S */
@@ -53,12 +55,12 @@ signed char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 
 static struct resource data_resource = {
 	.name	= "Kernel data",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource code_resource = {
 	.name	= "Kernel code",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource pdcdata_resource = {
@@ -199,7 +201,7 @@ static void __init setup_bootmem(void)
 		res->name = "System RAM";
 		res->start = pmem_ranges[i].start_pfn << PAGE_SHIFT;
 		res->end = res->start + (pmem_ranges[i].pages << PAGE_SHIFT)-1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 		request_resource(&iomem_resource, res);
 	}
 
@@ -407,15 +409,11 @@ static void __init map_pages(unsigned long start_vaddr,
 	unsigned long vaddr;
 	unsigned long ro_start;
 	unsigned long ro_end;
-	unsigned long fv_addr;
-	unsigned long gw_addr;
-	extern const unsigned long fault_vector_20;
-	extern void * const linux_gateway_page;
+	unsigned long kernel_end;
 
 	ro_start = __pa((unsigned long)_text);
 	ro_end   = __pa((unsigned long)&data_start);
-	fv_addr  = __pa((unsigned long)&fault_vector_20) & PAGE_MASK;
-	gw_addr  = __pa((unsigned long)&linux_gateway_page) & PAGE_MASK;
+	kernel_end  = __pa((unsigned long)&_end);
 
 	end_paddr = start_paddr + size;
 
@@ -473,24 +471,25 @@ static void __init map_pages(unsigned long start_vaddr,
 			for (tmp2 = start_pte; tmp2 < PTRS_PER_PTE; tmp2++, pg_table++) {
 				pte_t pte;
 
-				/*
-				 * Map the fault vector writable so we can
-				 * write the HPMC checksum.
-				 */
 				if (force)
 					pte =  __mk_pte(address, pgprot);
-				else if (parisc_text_address(vaddr) &&
-					 address != fv_addr)
+				else if (parisc_text_address(vaddr)) {
 					pte = __mk_pte(address, PAGE_KERNEL_EXEC);
+					if (address >= ro_start && address < kernel_end)
+						pte = pte_mkhuge(pte);
+				}
 				else
 #if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
-				if (address >= ro_start && address < ro_end
-							&& address != fv_addr
-							&& address != gw_addr)
-					pte = __mk_pte(address, PAGE_KERNEL_RO);
-				else
+				if (address >= ro_start && address < ro_end) {
+					pte = __mk_pte(address, PAGE_KERNEL_EXEC);
+					pte = pte_mkhuge(pte);
+				} else
 #endif
+				{
 					pte = __mk_pte(address, pgprot);
+					if (address >= ro_start && address < kernel_end)
+						pte = pte_mkhuge(pte);
+				}
 
 				if (address >= end_paddr) {
 					if (force)
@@ -534,15 +533,12 @@ void free_initmem(void)
 
 	/* force the kernel to see the new TLB entries */
 	__flush_tlb_range(0, init_begin, init_end);
-	/* Attempt to catch anyone trying to execute code here
-	 * by filling the page with BRK insns.
-	 */
-	memset((void *)init_begin, 0x00, init_end - init_begin);
+
 	/* finally dump all the instructions which were cached, since the
 	 * pages are no-longer executable */
 	flush_icache_range(init_begin, init_end);
 	
-	free_initmem_default(-1);
+	free_initmem_default(POISON_FREE_INITMEM);
 
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
@@ -590,6 +586,20 @@ unsigned long pcxl_dma_start __read_mostly;
 
 void __init mem_init(void)
 {
+	/* Do sanity checks on IPC (compat) structures */
+	BUILD_BUG_ON(sizeof(struct ipc64_perm) != 48);
+#ifndef CONFIG_64BIT
+	BUILD_BUG_ON(sizeof(struct semid64_ds) != 80);
+	BUILD_BUG_ON(sizeof(struct msqid64_ds) != 104);
+	BUILD_BUG_ON(sizeof(struct shmid64_ds) != 104);
+#endif
+#ifdef CONFIG_COMPAT
+	BUILD_BUG_ON(sizeof(struct compat_ipc64_perm) != sizeof(struct ipc64_perm));
+	BUILD_BUG_ON(sizeof(struct compat_semid64_ds) != 80);
+	BUILD_BUG_ON(sizeof(struct compat_msqid64_ds) != 104);
+	BUILD_BUG_ON(sizeof(struct compat_shmid64_ds) != 104);
+#endif
+
 	/* Do sanity checks on page table constants */
 	BUILD_BUG_ON(PTE_ENTRY_SIZE != sizeof(pte_t));
 	BUILD_BUG_ON(PMD_ENTRY_SIZE != sizeof(pmd_t));
@@ -712,8 +722,8 @@ static void __init pagetable_init(void)
 		unsigned long size;
 
 		start_paddr = pmem_ranges[range].start_pfn << PAGE_SHIFT;
-		end_paddr = start_paddr + (pmem_ranges[range].pages << PAGE_SHIFT);
 		size = pmem_ranges[range].pages << PAGE_SHIFT;
+		end_paddr = start_paddr + size;
 
 		map_pages((unsigned long)__va(start_paddr), start_paddr,
 			  size, PAGE_KERNEL, 0);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index db49e0d796b1..7cd32c038286 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -47,9 +47,6 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
@@ -97,6 +94,7 @@ config PPC
 	select OF_RESERVED_MEM
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select SYSCTL_EXCEPTION_TRACE
@@ -111,7 +109,6 @@ config PPC
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select HAVE_OPROFILE
 	select HAVE_DEBUG_KMEMLEAK
@@ -159,7 +156,10 @@ config PPC
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select HAVE_ARCH_SECCOMP_FILTER
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
@@ -305,7 +305,7 @@ config ZONE_DMA32
 config PGTABLE_LEVELS
 	int
 	default 2 if !PPC64
-	default 3 if PPC_64K_PAGES
+	default 3 if PPC_64K_PAGES && !PPC_BOOK3S_64
 	default 4
 
 source "init/Kconfig"
@@ -375,6 +375,24 @@ config PPC_TRANSACTIONAL_MEM
        ---help---
          Support user-mode Transactional Memory on POWERPC.
 
+config DISABLE_MPROFILE_KERNEL
+	bool "Disable use of mprofile-kernel for kernel tracing"
+	depends on PPC64 && CPU_LITTLE_ENDIAN
+	default y
+	help
+	  Selecting this options disables use of the mprofile-kernel ABI for
+	  kernel tracing. That will cause options such as live patching
+	  (CONFIG_LIVEPATCH) which depend on CONFIG_DYNAMIC_FTRACE_WITH_REGS to
+	  be disabled also.
+
+	  If you have a toolchain which supports mprofile-kernel, then you can
+	  enable this. Otherwise leave it disabled. If you're not sure, say
+	  "N".
+
+config MPROFILE_KERNEL
+	depends on PPC64 && CPU_LITTLE_ENDIAN
+	def_bool !DISABLE_MPROFILE_KERNEL
+
 config IOMMU_HELPER
 	def_bool PPC64
 
@@ -391,7 +409,7 @@ config SWIOTLB
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
 	depends on SMP && (PPC_PSERIES || \
-	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
+	PPC_PMAC || PPC_POWERNV || FSL_SOC_BOOKE)
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
@@ -559,6 +577,7 @@ choice
 
 config PPC_4K_PAGES
 	bool "4k page size"
+	select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64
 
 config PPC_16K_PAGES
 	bool "16k page size"
@@ -567,6 +586,7 @@ config PPC_16K_PAGES
 config PPC_64K_PAGES
 	bool "64k page size"
 	depends on !PPC_FSL_BOOK3E && (44x || PPC_STD_MMU_64 || PPC_BOOK3E_64)
+	select HAVE_ARCH_SOFT_DIRTY if PPC_BOOK3S_64
 
 config PPC_256K_PAGES
 	bool "256k page size"
@@ -828,14 +848,10 @@ config PCI_8260
 	select PPC_INDIRECT_PCI
 	default y
 
-source "drivers/pci/pcie/Kconfig"
-
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
 config HAS_RAPIDIO
 	bool
 	default n
@@ -1074,8 +1090,6 @@ source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
-source "arch/powerpc/sysdev/qe_lib/Kconfig"
-
 source "lib/Kconfig"
 
 source "arch/powerpc/Kconfig.debug"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 3a510f4a6b68..638f9ce740f5 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -64,17 +64,17 @@ config PPC_EMULATED_STATS
 	  emulated.
 
 config CODE_PATCHING_SELFTEST
-	bool "Run self-tests of the code-patching code."
+	bool "Run self-tests of the code-patching code"
 	depends on DEBUG_KERNEL
 	default n
 
 config FTR_FIXUP_SELFTEST
-	bool "Run self-tests of the feature-fixup code."
+	bool "Run self-tests of the feature-fixup code"
 	depends on DEBUG_KERNEL
 	default n
 
 config MSI_BITMAP_SELFTEST
-	bool "Run self-tests of the MSI bitmap code."
+	bool "Run self-tests of the MSI bitmap code"
 	depends on DEBUG_KERNEL
 	default n
 
@@ -335,18 +335,6 @@ config PPC_EARLY_DEBUG_CPM_ADDR
 	  platform probing is done, all platforms selected must
 	  share the same address.
 
-config STRICT_DEVMEM
-	def_bool y
-	prompt "Filter access to /dev/mem"
-	help
-	  This option restricts access to /dev/mem.  If this option is
-	  disabled, you allow userspace access to all memory, including
-	  kernel and userspace memory. Accidental memory access is likely
-	  to be disastrous.
-	  Memory access is required for experts who want to debug the kernel.
-
-	  If you are unsure, say Y.
-
 config FAIL_IOMMU
 	bool "Fault-injection capability for IOMMU"
 	depends on FAULT_INJECTION
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 96efd8213c1c..709a22a3e824 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -133,6 +133,21 @@ else
 CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64
 endif
 
+ifdef CONFIG_MPROFILE_KERNEL
+    ifeq ($(shell $(srctree)/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__),OK)
+        CC_FLAGS_FTRACE := -pg -mprofile-kernel
+        KBUILD_CPPFLAGS += -DCC_USING_MPROFILE_KERNEL
+    else
+        # If the user asked for mprofile-kernel but the toolchain doesn't
+        # support it, emit a warning and deliberately break the build later
+        # with mprofile-kernel-not-supported. We would prefer to make this an
+        # error right here, but then the user would never be able to run
+        # oldconfig to change their configuration.
+        $(warning Compiler does not support mprofile-kernel, set CONFIG_DISABLE_MPROFILE_KERNEL)
+        CC_FLAGS_FTRACE := -mprofile-kernel-not-supported
+    endif
+endif
+
 CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell)
 CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4)
 CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5)
@@ -310,6 +325,16 @@ corenet64_smp_defconfig:
 	$(call merge_into_defconfig,corenet_basic_defconfig,\
 		85xx-64bit 85xx-smp altivec 85xx-hw fsl-emb-nonhw)
 
+PHONY += mpc86xx_defconfig
+mpc86xx_defconfig:
+	$(call merge_into_defconfig,mpc86xx_basic_defconfig,\
+		86xx-hw fsl-emb-nonhw)
+
+PHONY += mpc86xx_smp_defconfig
+mpc86xx_smp_defconfig:
+	$(call merge_into_defconfig,mpc86xx_basic_defconfig,\
+		86xx-smp 86xx-hw fsl-emb-nonhw)
+
 define archhelp
   @echo '* zImage          - Build default images selected by kernel config'
   @echo '  zImage.*        - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 99e4487248ff..61165101342c 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -113,7 +113,6 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
 src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
 src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
 src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
-src-plat-$(CONFIG_PPC_CELL_QPACE) += pseries-head.S
 
 src-wlib := $(sort $(src-wlib-y))
 src-plat := $(sort $(src-plat-y))
@@ -217,7 +216,6 @@ image-$(CONFIG_PPC_POWERNV)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.maple
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
 image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
-image-$(CONFIG_PPC_CELL_QPACE)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
diff --git a/arch/powerpc/boot/dts/fsl/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts
index ba8c9bea33ac..a8bc419959ca 100644
--- a/arch/powerpc/boot/dts/fsl/b4860qds.dts
+++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts
@@ -1,7 +1,7 @@
 /*
  * B4860DS Device Tree Source
  *
- * Copyright 2012 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -39,12 +39,69 @@
 	model = "fsl,B4860QDS";
 	compatible = "fsl,B4860QDS";
 
+	aliases {
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xaui_slot1 = &phy_xaui_slot1;
+		phy_xaui_slot2 = &phy_xaui_slot2;
+	};
+
 	ifc: localbus@ffe124000 {
 		board-control@3,0 {
 			compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis";
 		};
 	};
 
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e8000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xaui_slot1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&phy_xaui_slot2>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_1e: ethernet-phy@1e {
+					reg = <0x1e>;
+					status = "disabled";
+				};
+
+				phy_sgmii_1f: ethernet-phy@1f {
+					reg = <0x1f>;
+					status = "disabled";
+				};
+			};
+
+			mdio@fd000 {
+				phy_xaui_slot1: xaui-phy@slot1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x7>;
+					status = "disabled";
+				};
+
+				phy_xaui_slot2: xaui-phy@slot2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x6>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
 	rio: rapidio@ffe0c0000 {
 		reg = <0xf 0xfe0c0000 0 0x11000>;
 
@@ -55,7 +112,6 @@
 			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 		};
 	};
-
 };
 
 /include/ "b4860si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
index 64557742fb99..3785ef826d07 100644
--- a/arch/powerpc/boot/dts/fsl/b4qds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
@@ -1,7 +1,7 @@
 /*
  * B4420DS Device Tree Source
  *
- * Copyright 2012 - 2014 Freescale Semiconductor, Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -39,6 +39,13 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		phy_sgmii_10 = &phy_sgmii_10;
+		phy_sgmii_11 = &phy_sgmii_11;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -135,7 +142,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 			};
@@ -210,6 +217,47 @@
 			phy_type = "ulpi";
 		};
 
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_10>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_11>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_10: ethernet-phy@10 {
+					reg = <0x10>;
+				};
+
+				phy_sgmii_11: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+
+				phy_sgmii_1c: ethernet-phy@1c {
+					reg = <0x1c>;
+					status = "disabled";
+				};
+
+				phy_sgmii_1d: ethernet-phy@1d {
+					reg = <0x1d>;
+					status = "disabled";
+				};
+			};
+		};
 	};
 
 	pci0: pcie@ffe200000 {
@@ -226,7 +274,6 @@
 				  0 0x00010000>;
 		};
 	};
-
 };
 
 /include/ "b4si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
index 74866ac52f39..1b33f5157c8a 100644
--- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi
@@ -474,6 +474,11 @@
 	fman@400000 {
 		interrupts = <96 2 0 0>, <16 2 1 30>;
 
+		muram@0 {
+			compatible = "fsl,fman-muram";
+			reg = <0x0 0x80000>;
+		};
+
 		enet0: ethernet@e0000 {
 		};
 
diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
index f4d96d277ed5..53f8b956340f 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi
@@ -53,7 +53,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <50000000>;
 
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
index 70882ade606d..56e6f1337e96 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts
@@ -29,6 +29,21 @@
 	soc: soc@ff700000 {
 		ranges = <0x0 0x0 0xff700000 0x100000>;
 	};
+
+	pci0: pcie@ff70a000 {
+		reg = <0 0xff70a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x90000000
+				  0x2000000 0x0 0x90000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
 };
 
 /include/ "bsc9132qds.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
index 7a13bf2aa439..fead484a8180 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi
@@ -55,7 +55,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <30000000>;
 		};
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
index c72307198140..b5f071574e83 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi
@@ -40,6 +40,34 @@
 	interrupts = <16 2 0 0 20 2 0 0>;
 };
 
+/* controller at 0xa000 */
+&pci0 {
+	compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 255>;
+	interrupts = <16 2 0 0>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0
+			>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
index 301a9dba5790..90f7949fe312 100644
--- a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi
@@ -45,6 +45,7 @@
 		serial0 = &serial0;
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
+		pci0 = &pci0;
 	};
 
 	cpus {
diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts
index 53ab4db9e79c..66709788429d 100644
--- a/arch/powerpc/boot/dts/fsl/c293pcie.dts
+++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts
@@ -167,7 +167,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <50000000>;
 
diff --git a/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
new file mode 100644
index 000000000000..0424fc2bd0e0
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_ppc9a.dts
@@ -0,0 +1,216 @@
+/*
+ * GE PPC9A Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_PPC9A";
+	compatible = "gef,ppc9a";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,ppc9a-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,ppc9a-fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		wdt@4,2000 {
+			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,2010 {
+			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@7,14000 {
+			#gpio-cells = <2>;
+			compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
+			reg = <0x7 0x14000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc310.dts b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
new file mode 100644
index 000000000000..84b3d38f880e
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc310.dts
@@ -0,0 +1,260 @@
+/*
+ * GE SBC310 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_SBC310";
+	compatible = "gef,sbc310";
+
+	aliases {
+		pci1 = &pci1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe0000000 0x08000000	// Paged Flash 0
+			  2 0 0xe8000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00010000>;	// FPGA
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x01000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc310-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		wdt@4,2000 {
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+/*
+		wdt@4,2010 {
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@4,8000 {
+			#gpio-cells = <2>;
+			compatible = "gef,sbc310-gpio";
+			reg = <0x4 0x8000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+		};
+
+		i2c@3100 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
+		>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfef09000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+		clock-frequency = <100000000>;
+		interrupts = <0x19 0x2 0 0>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xc0000000
+				  0x02000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/gef_sbc610.dts b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
new file mode 100644
index 000000000000..974446acce23
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/gef_sbc610.dts
@@ -0,0 +1,214 @@
+/*
+ * GE SBC610 Device Tree Source
+ *
+ * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: SBS CM6 Device Tree Source
+ * Copyright 2007 SBS Technologies GmbH & Co. KG
+ * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
+ * Copyright 2006 Freescale Semiconductor Inc.
+ */
+
+/*
+ * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "GEF_SBC610";
+	compatible = "gef,sbc610";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;	// set by uboot
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0xfef05000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xe8000000 0x08000000	// Paged Flash 0
+			  2 0 0xe0000000 0x08000000	// Paged Flash 1
+			  3 0 0xfc100000 0x00020000	// NVRAM
+			  4 0 0xfc000000 0x00008000	// FPGA
+			  5 0 0xfc008000 0x00008000	// AFIX FPGA
+			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
+			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
+
+		/* flash@0,0 is a mirror of part of the memory in flash@1,0
+		flash@0,0 {
+			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		flash@1,0 {
+			compatible = "gef,sbc610-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "gef,fpga-regs";
+			reg = <0x4 0x0 0x40>;
+		};
+
+		wdt@4,2000 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,2010 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+		gef_pic: pic@4,4000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "gef,fpga-pic";
+			reg = <0x4 0x4000 0x20>;
+			interrupts = <0x8 0x9 0 0>;
+
+		};
+		gef_gpio: gpio@7,14000 {
+			#gpio-cells = <2>;
+			compatible = "gef,sbc610-gpio";
+			reg = <0x7 0x14000 0x24>;
+			gpio-controller;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0xfef00000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x00000051>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x9 0x4>;
+				reg = <1>;
+			};
+			phy2: ethernet-phy@2 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0x8 0x4>;
+				reg = <3>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "gmii";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@25000 {
+			status = "disabled";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			status = "disabled";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		reg = <0xfef08000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
+			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x40000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
index 6858ec9ef295..2d4b64fcee88 100644
--- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts
+++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts
@@ -63,7 +63,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25fl256s1";
+				compatible = "spansion,s25fl256s1", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>; /* input clock */
 			};
@@ -77,7 +77,7 @@
 			flash@2 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,m25p32";
+				compatible = "micron,m25p32", "jedec,spi-nor";
 				reg = <2>;
 				spi-max-frequency = <15000000>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
index 937ad7e46119..a925fe49a73e 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi
@@ -142,7 +142,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>;
 			partition@u-boot {
@@ -166,17 +166,17 @@
 			};
 		};
 		flash@1 {
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <1>;
 			spi-max-frequency = <40000000>;
 		};
 		flash@2 {
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <2>;
 			spi-max-frequency = <40000000>;
 		};
 		flash@3 {
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <3>;
 			spi-max-frequency = <40000000>;
 		};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
index 1c03060dd0b8..554001f2e96a 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn.dts
@@ -9,65 +9,23 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
 
 / {
 	model = "MPC8641HPCN";
 	compatible = "fsl,mpc8641hpcn";
-	#address-cells = <1>;
-	#size-cells = <1>;
 
 	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
 		pci1 = &pci1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;		// L1
-			i-cache-size = <32768>;		// L1
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>;	// 1G at 0x0
 	};
 
-	localbus@ffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
+	lbc: localbus@ffe05000 {
 		reg = <0xffe05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		ranges = <0 0 0xef800000 0x00800000
 			  2 0 0xffdf8000 0x00008000
@@ -101,253 +59,75 @@
 		};
 	};
 
-	soc8641@ffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
+	soc: soc8641@ffe00000 {
 		ranges = <0x00000000 0xffe00000 0x00100000>;
-		bus-frequency = <0>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
 
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupts = <10 1 0 0>;
+				reg = <0>;
 			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
+			phy1: ethernet-phy@1 {
+				interrupts = <10 1 0 0>;
+				reg = <1>;
 			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
+			phy2: ethernet-phy@2 {
+				interrupts = <10 1 0 0>;
+				reg = <2>;
 			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
+			phy3: ethernet-phy@3 {
+				interrupts = <10 1 0 0>;
+				reg = <3>;
 			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
+		};
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 		
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
+		};
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <28 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
+		mdio@27520 {
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 
 		rmu: rmu@d3000 {
@@ -361,50 +141,35 @@
 				compatible = "fsl,srio-msg-unit";
 				reg = <0x0 0x100>;
 				interrupts = <
-					53 2 /* msg1_tx_irq */
-					54 2>;/* msg1_rx_irq */
+					53 2 0 0  /* msg1_tx_irq */
+					54 2 0 0>;/* msg1_rx_irq */
 			};
 			message-unit@100 {
 				compatible = "fsl,srio-msg-unit";
 				reg = <0x100 0x100>;
 				interrupts = <
-					55 2  /* msg2_tx_irq */
-					56 2>;/* msg2_rx_irq */
+					55 2 0 0  /* msg2_tx_irq */
+					56 2 0 0>;/* msg2_rx_irq */
 			};
 			doorbell-unit@400 {
 				compatible = "fsl,srio-dbell-unit";
 				reg = <0x400 0x80>;
 				interrupts = <
-					49 2  /* bell_outb_irq */
-					50 2>;/* bell_inb_irq */
+					49 2 0 0  /* bell_outb_irq */
+					50 2 0 0>;/* bell_inb_irq */
 			};
 			port-write-unit@4e0 {
 				compatible = "fsl,srio-port-write-unit";
 				reg = <0x4e0 0x20>;
-				interrupts = <48 2>;
+				interrupts = <48 2 0 0>;
 			};
 		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
 	};
 
 	pci0: pcie@ffe08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0xffe08000 0x1000>;
-		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
 		interrupt-map-mask = <0xff00 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -522,10 +287,6 @@
 			>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0x0 0x80000000
 				  0x02000000 0x0 0x80000000
 				  0x0 0x20000000
@@ -545,7 +306,6 @@
 					  0x0 0x00010000>;
 				isa@1e {
 					device_type = "isa";
-					#interrupt-cells = <2>;
 					#size-cells = <1>;
 					#address-cells = <2>;
 					reg = <0xf000 0 0 0 0>;
@@ -562,8 +322,7 @@
 						#address-cells = <0>;
 						#interrupt-cells = <2>;
 						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
+						interrupts = <9 2 0 0>;
 					};
 
 					i8042@60 {
@@ -571,8 +330,7 @@
 						#address-cells = <1>;
 						reg = <1 0x60 1 1 0x64 1>;
 						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
+						interrupt-parent = <&i8259>;
 
 						keyboard@0 {
 							reg = <0>;
@@ -603,16 +361,14 @@
 	pci1: pcie@ffe09000 {
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
-		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		reg = <0xffe09000 0x1000>;
 		bus-range = <0 0xff>;
 		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+		clock-frequency = <100000000>;
+		interrupts = <25 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -644,8 +400,7 @@
 	rapidio@ffec0000 {
 		reg = <0xffec0000 0x11000>;
 		compatible = "fsl,srio";
-		interrupt-parent = <&mpic>;
-		interrupts = <48 2>;
+		interrupts = <48 2 0 0>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		fsl,srio-rmu-handle = <&rmu>;
@@ -661,3 +416,5 @@
 */
 
 };
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
index bb575e28042a..fec58671a6d6 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/mpc8641_hpcn_36b.dts
@@ -9,7 +9,7 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc8641si-pre.dtsi"
 
 / {
 	model = "MPC8641HPCN";
@@ -18,56 +18,16 @@
 	#size-cells = <2>;
 
 	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
 		pci1 = &pci1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// 33 MHz, from uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// 33 MHz, from uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x0 0x40000000>;	// 1G at 0x0
 	};
 
-	localbus@fffe05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
+	lbc: localbus@fffe05000 {
 		reg = <0x0f 0xffe05000 0x0 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
 
 		ranges = <0 0 0xf 0xef800000 0x00800000
 			  2 0 0xf 0xffdf8000 0x00008000
@@ -101,276 +61,82 @@
 		};
 	};
 
-	soc8641@fffe00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
+	soc: soc8641@fffe00000 {
 		ranges = <0x00000000 0x0f 0xffe00000 0x00100000>;
-		bus-frequency = <0>;
 
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
 		};
 
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupts = <10 1 0 0>;
+				reg = <0>;
 			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
+			phy1: ethernet-phy@1 {
+				interrupts = <10 1 0 0>;
+				reg = <1>;
 			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
+			phy2: ethernet-phy@2 {
+				interrupts = <10 1 0 0>;
+				reg = <2>;
 			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
+			phy3: ethernet-phy@3 {
+				interrupts = <10 1 0 0>;
+				reg = <3>;
 			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi1>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
+		};
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi2>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
+		};
 
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
 			};
 		};
 
 		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
 			tbi-handle = <&tbi3>;
 			phy-handle = <&phy3>;
 			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
 		};
 
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <28 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
+		mdio@27520 {
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 	};
 
 	pci0: pcie@fffe08000 {
-		cell-index = <0>;
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
 		reg = <0x0f 0xffe08000 0x0 0x1000>;
-		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
 		interrupt-map-mask = <0xff00 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x11 func 0 - PCI slot 1 */
@@ -488,10 +254,6 @@
 			>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
 			ranges = <0x02000000 0x0 0xe0000000
 				  0x02000000 0x0 0xe0000000
 				  0x0 0x20000000
@@ -511,7 +273,6 @@
 					  0x0 0x00010000>;
 				isa@1e {
 					device_type = "isa";
-					#interrupt-cells = <2>;
 					#size-cells = <1>;
 					#address-cells = <2>;
 					reg = <0xf000 0 0 0 0>;
@@ -528,8 +289,7 @@
 						#address-cells = <0>;
 						#interrupt-cells = <2>;
 						compatible = "chrp,iic";
-						interrupts = <9 2>;
-						interrupt-parent = <&mpic>;
+						interrupts = <9 2 0 0>;
 					};
 
 					i8042@60 {
@@ -537,8 +297,7 @@
 						#address-cells = <1>;
 						reg = <1 0x60 1 1 0x64 1>;
 						interrupts = <1 3 12 3>;
-						interrupt-parent =
-							<&i8259>;
+						interrupt-parent = <&i8259>;
 
 						keyboard@0 {
 							reg = <0>;
@@ -567,19 +326,16 @@
 	};
 
 	pci1: pcie@fffe09000 {
-		cell-index = <1>;
 		compatible = "fsl,mpc8641-pcie";
 		device_type = "pci";
-		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		reg = <0x0f 0xffe09000 0x0 0x1000>;
 		bus-range = <0x0 0xff>;
 		ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000
 			  0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+		clock-frequency = <100000000>;
+		interrupts = <25 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -603,3 +359,5 @@
 		};
 	};
 };
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
new file mode 100644
index 000000000000..70889d8e8850
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-post.dtsi
@@ -0,0 +1,120 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+&lbc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8641-localbus", "simple-bus";
+	interrupts = <19 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,mpc8641-soc", "simple-bus";
+	bus-frequency = <0>;
+
+	mcm-law@0 {
+		compatible = "fsl,mcm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <10>;
+	};
+
+	mcm@1000 {
+		compatible = "fsl,mpc8641-mcm", "fsl,mcm";
+		reg = <0x1000 0x1000>;
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+	serial@4600 {
+		interrupts = <28 2 0 0>;
+	};
+/include/ "pq3-dma-0.dtsi"
+	dma@21300 {
+		compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+	};
+	dma-channel@0 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@80 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@100 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+	dma-channel@180 {
+		compatible = "fsl,mpc8641-dma-channel", "fsl,eloplus-dma-channel";
+	};
+
+/include/ "pq3-etsec1-0.dtsi"
+	ethernet@24000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-1.dtsi"
+	ethernet@25000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-2.dtsi"
+	ethernet@26000 {
+		model = "TSEC";
+	};
+/include/ "pq3-etsec1-3.dtsi"
+	ethernet@27000 {
+		model = "TSEC";
+	};
+
+/include/ "qoriq-mpic.dtsi"
+	msi@41600 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+	msi@41800 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+	msi@41a00 {
+		compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
+	};
+
+	global-utilities@e0000 {
+		compatible = "fsl,mpc8641-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};
+
+&pci0 {
+	compatible = "fsl,mpc8641-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <100000000>;
+	interrupts = <24 2 0 0>;
+	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+
+	interrupt-map = <
+		0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
+		0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
+		0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
+		0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
+		>;
+
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
new file mode 100644
index 000000000000..9e03328561d3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8641si-pre.dtsi
@@ -0,0 +1,58 @@
+/*
+ * MPC8641 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts
index c7bc1a0c7194..69559e970e99 100644
--- a/arch/powerpc/boot/dts/fsl/mvme2500.dts
+++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts
@@ -70,12 +70,12 @@
 			fsl,espi-num-chipselects = <2>;
 
 			flash@0 {
-				compatible = "atmel,at25df641";
+				compatible = "atmel,at25df641", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <10000000>;
 			};
 			flash@1 {
-				compatible = "atmel,at25df641";
+				compatible = "atmel,at25df641", "jedec,spi-nor";
 				reg = <1>;
 				spi-max-frequency = <10000000>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index 0f0ced69835a..a8e4ba070104 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -110,7 +110,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>;
 
@@ -215,3 +215,19 @@
 		phy-connection-type = "sgmii";
 	};
 };
+
+&pci0 {
+	pcie@0 {
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			/*
+			 *irq[4:5] are active-high
+			 *irq[6:7] are active-low
+			 */
+			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+			>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
index c952cd37cf6d..25f81eea60e0 100644
--- a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi
@@ -151,7 +151,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>; /* input clock */
 
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
index 740553c090a3..f2dc6c09be52 100644
--- a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts
@@ -155,7 +155,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				/* input clock */
 				spi-max-frequency = <40000000>;
diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
index 1fb7e0e0940f..703142ee6627 100644
--- a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi
@@ -148,7 +148,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>; /* input clock */
 
diff --git a/arch/powerpc/boot/dts/fsl/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts
index 27fdfd7dc7c7..291454c75dda 100644
--- a/arch/powerpc/boot/dts/fsl/p1021mds.dts
+++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts
@@ -123,7 +123,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 
diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
index e8a0f95fb24a..18f9b31602d0 100644
--- a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi
@@ -150,7 +150,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>; /* input clock */
 
diff --git a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
index 149da0f123ee..ddefbf64f7f8 100644
--- a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi
@@ -160,7 +160,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>; /* input clock */
 
diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
index 04c16337268a..d505d7c51903 100644
--- a/arch/powerpc/boot/dts/fsl/p1022rdk.dts
+++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts
@@ -86,7 +86,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,m25p80";
+				compatible = "spansion,m25p80", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <1000000>;
 				partition@0 {
diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
index b05dcb40f800..b4d05867f707 100644
--- a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi
@@ -129,7 +129,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,m25p80";
+			compatible = "spansion,m25p80", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>;
 
diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
index f50256482297..d44bb12debb0 100644
--- a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi
@@ -137,7 +137,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,s25sl12801";
+			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>; /* input clock */
 
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
index ad2e242365cc..03c9afc82436 100644
--- a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi
@@ -151,7 +151,7 @@
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "spansion,m25p80";
+			compatible = "spansion,m25p80", "jedec,spi-nor";
 			reg = <0>;
 			spi-max-frequency = <40000000>;
 
diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
index 70cf09019ce5..435a319958cb 100644
--- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
@@ -155,7 +155,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>;
 
diff --git a/arch/powerpc/boot/dts/fsl/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
index e9bd89406c4c..e50fea95a853 100644
--- a/arch/powerpc/boot/dts/fsl/p2041rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts
@@ -1,7 +1,7 @@
 /*
  * P2041RDB Device Tree Source
  *
- * Copyright 2011 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2011 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,19 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_2 = &phy_sgmii_2;
+		phy_sgmii_3 = &phy_sgmii_3;
+		phy_sgmii_4 = &phy_sgmii_4;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_2 = &phy_xgmii_2;
+	};
+
 	memory {
 		device_type = "memory";
 	};
@@ -83,7 +96,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 				partition@u-boot {
@@ -137,6 +150,83 @@
 		usb1: usb@211000 {
 			dr_mode = "host";
 		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@e1120 {
+				phy_rgmii_0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy_rgmii_1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				phy_sgmii_2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				phy_sgmii_3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+
+				phy_sgmii_4: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				phy_sgmii_1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+
+				phy_sgmii_1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+
+				phy_sgmii_1e: ethernet-phy@1e {
+					reg = <0x1e>;
+				};
+
+				phy_sgmii_1f: ethernet-phy@1f {
+					reg = <0x1f>;
+				};
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_3>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_4>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_2>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@f1000 {
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
 	};
 
 	rio: rapidio@ffe0c0000 {
diff --git a/arch/powerpc/boot/dts/fsl/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts
index f2b1d40334d4..40748e415adb 100644
--- a/arch/powerpc/boot/dts/fsl/p3041ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts
@@ -1,7 +1,7 @@
 /*
  * P3041DS Device Tree Source
  *
- * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,20 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases{
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_1 = &phy_xgmii_1;
+		phy_xgmii_2 = &phy_xgmii_2;
+		emi1_rgmii = &hydra_mdio_rgmii;
+		emi1_sgmii = &hydra_mdio_sgmii;
+		emi2_xgmii = &hydra_mdio_xgmii;
+	};
+
 	memory {
 		device_type = "memory";
 	};
@@ -83,7 +97,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <35000000>; /* input clock */
 				partition@u-boot {
@@ -150,6 +164,52 @@
 				reg = <0x4c>;
 			};
 		};
+
+		fman@400000{
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_1>;
+				phy-connection-type = "xgmii";
+			};
+
+			hydra_mdio_xgmii: mdio@f1000 {
+				status = "disabled";
+
+				phy_xgmii_1: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
 	};
 
 	rio: rapidio@ffe0c0000 {
@@ -215,8 +275,58 @@
 		};
 
 		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
 			reg = <3 0 0x30>;
+			ranges = <0 3 0 0x30>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_mdio_rgmii: rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_mdio_sgmii: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/fsl/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts
index 28a55c5e7099..816b9788d5f6 100644
--- a/arch/powerpc/boot/dts/fsl/p4080ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts
@@ -1,7 +1,7 @@
 /*
  * P4080DS Device Tree Source
  *
- * Copyright 2009 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2009 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,20 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		phy_rgmii = &phyrgmii;
+		phy5_slot3 = &phy5slot3;
+		phy6_slot3 = &phy6slot3;
+		phy7_slot3 = &phy7slot3;
+		phy8_slot3 = &phy8slot3;
+		emi1_slot3 = &p4080mdio2;
+		emi1_slot4 = &p4080mdio1;
+		emi1_slot5 = &p4080mdio3;
+		emi1_rgmii = &p4080mdio0;
+		emi2_slot4 = &p4080xmdio1;
+		emi2_slot5 = &p4080xmdio3;
+	};
+
 	memory {
 		device_type = "memory";
 	};
@@ -84,7 +98,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 				partition@u-boot {
@@ -137,6 +151,60 @@
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy1>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy3>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy10>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-handle = <&phy5>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy6>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy7>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy8>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy11>;
+				phy-connection-type = "xgmii";
+			};
+		};
 	};
 
 	rio: rapidio@ffe0c0000 {
@@ -213,6 +281,120 @@
 		};
 	};
 
+	mdio-mux-emi1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "mdio-mux-gpio", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		gpios = <&gpio0 1 0>, <&gpio0 0 0>;
+
+		p4080mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			phyrgmii: ethernet-phy@0 {
+				reg = <0x0>;
+			};
+		};
+
+		p4080mdio1: mdio@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			phy5: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy6: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy7: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy8: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		p4080mdio2: mdio@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			status = "disabled";
+
+			phy5slot3: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy6slot3: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy7slot3: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy8slot3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		p4080mdio3: mdio@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			phy0: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy1: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy2: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy3: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	mdio-mux-emi2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "mdio-mux-gpio", "mdio-mux";
+		mdio-parent-bus = <&xmdio0>;
+		gpios = <&gpio0 3 0>, <&gpio0 2 0>;
+
+		p4080xmdio1: mdio@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			phy11: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x0>;
+			};
+		};
+
+		p4080xmdio3: mdio@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			phy10: ethernet-phy@4 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x4>;
+			};
+		};
+	};
 };
 
 /include/ "p4080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts
index 920dc77b9c43..cd6f37386111 100644
--- a/arch/powerpc/boot/dts/fsl/p5020ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts
@@ -1,7 +1,7 @@
 /*
  * P5020DS Device Tree Source
  *
- * Copyright 2010 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2010 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,20 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+		phy_sgmii_1e = &phy_sgmii_1e;
+		phy_sgmii_1f = &phy_sgmii_1f;
+		phy_xgmii_1 = &phy_xgmii_1;
+		phy_xgmii_2 = &phy_xgmii_2;
+		emi1_rgmii = &hydra_mdio_rgmii;
+		emi1_sgmii = &hydra_mdio_sgmii;
+		emi2_xgmii = &hydra_mdio_xgmii;
+	};
+
 	memory {
 		device_type = "memory";
 	};
@@ -83,7 +97,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 				partition@u-boot {
@@ -150,6 +164,52 @@
 				reg = <0x4c>;
 			};
 		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1e>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1f>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_1>;
+				phy-connection-type = "xgmii";
+			};
+
+			hydra_mdio_xgmii: mdio@f1000 {
+				status = "disabled";
+
+				phy_xgmii_1: ethernet-phy@4 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x4>;
+				};
+
+				phy_xgmii_2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
 	};
 
 	rio: rapidio@ffe0c0000 {
@@ -215,8 +275,58 @@
 		};
 
 		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis";
 			reg = <3 0 0x30>;
+			ranges = <0 3 0 0x30>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_mdio_rgmii: rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_mdio_sgmii: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/fsl/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts
index e169cc297ea3..45084738cf4e 100644
--- a/arch/powerpc/boot/dts/fsl/p5040ds.dts
+++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts
@@ -1,7 +1,7 @@
 /*
  * P5040DS Device Tree Source
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,32 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases{
+		phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c;
+		phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d;
+		phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e;
+		phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f;
+		phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c;
+		phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d;
+		phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e;
+		phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f;
+		phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c;
+		phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d;
+		phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e;
+		phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f;
+		phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c;
+		phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d;
+		phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e;
+		phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f;
+		hydra_rg = &hydra_rg;
+		hydra_sg_slot2 = &hydra_sg_slot2;
+		hydra_sg_slot3 = &hydra_sg_slot3;
+		hydra_sg_slot5 = &hydra_sg_slot5;
+		hydra_sg_slot6 = &hydra_sg_slot6;
+		hydra_xg_slot1 = &hydra_xg_slot1;
+		hydra_xg_slot2 = &hydra_xg_slot2;
+	};
+
 	memory {
 		device_type = "memory";
 	};
@@ -83,7 +109,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
+				compatible = "spansion,s25sl12801", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 				partition@u-boot {
@@ -147,6 +173,62 @@
 				reg = <0x4c>;
 			};
 		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_slot_2>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&phy_xgmii_slot_1>;
+				phy-connection-type = "xgmii";
+			};
+		};
 	};
 
 	lbc: localbus@ffe124000 {
@@ -200,8 +282,158 @@
 		};
 
 		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis";
 			reg = <3 0 0x40>;
+			ranges = <0 3 0 0x40>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <9 1>;
+				mux-mask = <0x78>;
+
+				hydra_rg:rgmii-mdio@8 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <8>;
+					status = "disabled";
+
+					phy_rgmii_0: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy_rgmii_1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				hydra_sg_slot2: sgmii-mdio@28 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x28>;
+					status = "disabled";
+
+					phy_sgmii_slot2_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot2_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot2_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot2_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				hydra_sg_slot3: sgmii-mdio@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x68>;
+					status = "disabled";
+
+					phy_sgmii_slot3_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot3_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot3_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot3_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				hydra_sg_slot5: sgmii-mdio@38 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x38>;
+					status = "disabled";
+
+					phy_sgmii_slot5_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot5_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot5_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot5_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+				hydra_sg_slot6: sgmii-mdio@48 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x48>;
+					status = "disabled";
+
+					phy_sgmii_slot6_1c: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_sgmii_slot6_1d: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_sgmii_slot6_1e: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_sgmii_slot6_1f: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
+
+			mdio-mux-emi2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&xmdio0>;
+				reg = <9 1>;
+				mux-mask = <0x06>;
+
+				hydra_xg_slot1: hydra-xg-slot1@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					status = "disabled";
+
+					phy_xgmii_slot_1: ethernet-phy@0 {
+						compatible = "ethernet-phy-ieee802.3-c45";
+						reg = <4>;
+					};
+				};
+
+				hydra_xg_slot2: hydra-xg-slot2@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					phy_xgmii_slot_2: ethernet-phy@4 {
+						compatible = "ethernet-phy-ieee802.3-c45";
+						reg = <0>;
+					};
+				};
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
index 2f227b1345ad..e2bd9313e632 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
@@ -420,6 +420,7 @@
 		fsl,iommu-parent = <&pamu4>;
 	};
 
+/include/ "qoriq-raid1.0-0.dtsi"
 /include/ "qoriq-qman1.dtsi"
 /include/ "qoriq-bman1.dtsi"
 
diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
index 0659d5bb69b8..dbd57750fc02 100644
--- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
@@ -73,6 +73,12 @@
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
 
+		raideng = &raideng;
+		raideng_jr0 = &raideng_jr0;
+		raideng_jr1 = &raideng_jr1;
+		raideng_jr2 = &raideng_jr2;
+		raideng_jr3 = &raideng_jr3;
+
 		fman0 = &fman0;
 		fman1 = &fman1;
 		ethernet0 = &enet0;
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
index 2e441fab6d8f..e1a961f05dcd 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi
@@ -55,6 +55,7 @@ fman@400000 {
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
 	};
 
 	mdio@e1000 {
@@ -62,5 +63,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
index 0b8f87f79d15..c288f3c6c637 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi
@@ -52,6 +52,7 @@ fman@400000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>;
+		pcsphy-handle = <&pcsphy6>;
 	};
 
 	mdio@f1000 {
@@ -59,5 +60,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf1000 0x1000>;
+
+		pcsphy6: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
index ba6f2275d3f6..94f3e7175012 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi
@@ -55,6 +55,7 @@ fman@400000 {
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
 	};
 
 	mdio@e3000 {
@@ -62,5 +63,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
index 886003805592..94a76982d214 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi
@@ -52,6 +52,7 @@ fman@400000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>;
+		pcsphy-handle = <&pcsphy7>;
 	};
 
 	mdio@f3000 {
@@ -59,5 +60,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf3000 0x1000>;
+
+		pcsphy7: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
index ace9c13648ce..b5ff5f71c6b8 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi
@@ -51,6 +51,7 @@ fman@400000 {
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
 	};
 
 	mdio@e1000 {
@@ -58,5 +59,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe1000 0x1000>;
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
index a4fc28654b31..ee44182c6348 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi
@@ -51,6 +51,7 @@ fman@400000 {
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
 	};
 
 	mdio@e3000 {
@@ -58,5 +59,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe3000 0x1000>;
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
index 78596faadf99..f05f0d775039 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi
@@ -51,6 +51,7 @@ fman@400000 {
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy2>;
 	};
 
 	mdio@e5000 {
@@ -58,5 +59,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe5000 0x1000>;
+
+		pcsphy2: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
index af93abd86d78..a9114ec51075 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi
@@ -51,6 +51,7 @@ fman@400000 {
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy3>;
 	};
 
 	mdio@e7000 {
@@ -58,5 +59,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe7000 0x1000>;
+
+		pcsphy3: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
index 97cffd74bf3d..44dd00ac7367 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi
@@ -51,6 +51,7 @@ fman@400000 {
 		reg = <0xe8000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy4>;
 	};
 
 	mdio@e9000 {
@@ -58,5 +59,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe9000 0x1000>;
+
+		pcsphy4: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
index 232c5c277bdb..5b1b84b58602 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi
@@ -51,6 +51,7 @@ fman@400000 {
 		reg = <0xea000 0x1000>;
 		fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>;
 		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy5>;
 	};
 
 	mdio@eb000 {
@@ -58,5 +59,9 @@ fman@400000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xeb000 0x1000>;
+
+		pcsphy5: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
index 89d64ee282b0..0e1daaef9e74 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi
@@ -52,6 +52,7 @@ fman@500000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+		pcsphy-handle = <&pcsphy14>;
 	};
 
 	mdio@f1000 {
@@ -59,5 +60,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf1000 0x1000>;
+
+		pcsphy14: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
index 7fa9260889c6..68c5ef779266 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi
@@ -52,6 +52,7 @@ fman@500000 {
 		compatible = "fsl,fman-memac";
 		reg = <0xf2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
+		pcsphy-handle = <&pcsphy15>;
 	};
 
 	mdio@f3000 {
@@ -59,5 +60,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xf3000 0x1000>;
+
+		pcsphy15: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
index 3d236662bf07..605363cc1117 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi
@@ -51,6 +51,7 @@ fman@500000 {
 		reg = <0xe0000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>;
 		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy8>;
 	};
 
 	mdio@e1000 {
@@ -58,5 +59,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe1000 0x1000>;
+
+		pcsphy8: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
index 97dc2eedd462..1955dfa13634 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi
@@ -51,6 +51,7 @@ fman@500000 {
 		reg = <0xe2000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>;
 		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy9>;
 	};
 
 	mdio@e3000 {
@@ -58,5 +59,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe3000 0x1000>;
+
+		pcsphy9: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
index f084dd2f0bec..2c1476454ee0 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi
@@ -51,6 +51,7 @@ fman@500000 {
 		reg = <0xe4000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>;
 		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy10>;
 	};
 
 	mdio@e5000 {
@@ -58,5 +59,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe5000 0x1000>;
+
+		pcsphy10: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
index bb627b3bf3db..b8b541ff5fb0 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi
@@ -51,6 +51,7 @@ fman@500000 {
 		reg = <0xe6000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>;
 		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy11>;
 	};
 
 	mdio@e7000 {
@@ -58,5 +59,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe7000 0x1000>;
+
+		pcsphy11: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
index 821ed12225d4..4b2cfddd1b15 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi
@@ -51,6 +51,7 @@ fman@500000 {
 		reg = <0xe8000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>;
 		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy12>;
 	};
 
 	mdio@e9000 {
@@ -58,5 +59,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xe9000 0x1000>;
+
+		pcsphy12: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
index e245f1a1e42a..0a52ddf7cc17 100644
--- a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi
@@ -51,6 +51,7 @@ fman@500000 {
 		reg = <0xea000 0x1000>;
 		fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>;
 		ptp-timer = <&ptp_timer1>;
+		pcsphy-handle = <&pcsphy13>;
 	};
 
 	mdio@eb000 {
@@ -58,5 +59,9 @@ fman@500000 {
 		#size-cells = <0>;
 		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
 		reg = <0xeb000 0x1000>;
+
+		pcsphy13: ethernet-phy@0 {
+			reg = <0x0>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/fsl/sbc8641d.dts b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
new file mode 100644
index 000000000000..0a9733cd418d
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/sbc8641d.dts
@@ -0,0 +1,203 @@
+/*
+ * SBC8641D Device Tree Source
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "SBC8641D";
+	compatible = "wind,sbc8641";
+
+	aliases {
+		pci1 = &pci1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512M at 0x0
+	};
+
+	lbc: localbus@f8005000 {
+		reg = <0xf8005000 0x1000>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
+			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
+			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
+			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
+			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
+			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "dtb";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@300000 {
+				label = "kernel";
+				reg = <0x00100000 0x00400000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00500000 0x00a00000>;
+			};
+			partition@700000 {
+				label = "firmware";
+				reg = <0x00f00000 0x00100000>;
+				read-only;
+			};
+		};
+
+		epld@2,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <2 0 0x100000>;
+			ranges = <0 0 5 0 1	// User switches
+				  1 0 5 1 1	// Board ID/Rev
+				  3 0 5 3 1>;	// LEDs
+		};
+	};
+
+	soc: soc@f8000000 {
+		ranges = <0x00000000 0xf8000000 0x00100000>;
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+			phy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+			phy2: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy3: ethernet-phy@2 {
+				reg = <2>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet2: ethernet@26000 {
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet3: ethernet@27000 {
+			tbi-handle = <&tbi3>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+	};
+
+	pci0: pcie@f8008000 {
+		reg = <0xf8008000 0x1000>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+
+		pcie@0 {
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+
+	};
+
+	pci1: pcie@f8009000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf8009000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+		clock-frequency = <100000000>;
+		interrupts = <25 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0000 0 0 1 &mpic 4 1
+			0x0000 0 0 2 &mpic 5 1
+			0x0000 0 0 3 &mpic 6 1
+			0x0000 0 0 4 &mpic 7 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xa0000000
+				  0x02000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
index 2b2fff4a12a2..29757623e5ba 100644
--- a/arch/powerpc/boot/dts/fsl/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts
@@ -79,7 +79,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "spansion,s25fl512s";
+				compatible = "spansion,s25fl512s", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <10000000>; /* input clk */
 			};
@@ -111,6 +111,47 @@
 				shunt-resistor = <1000>;
 			};
 		};
+
+		fman@400000 {
+			fm1mac1: ethernet@e0000 {
+				phy-handle = <&sgmii_rtk_phy2>;
+				phy-connection-type = "sgmii";
+				sleep = <&rcpm 0x80000000>;
+			};
+
+			fm1mac2: ethernet@e2000 {
+				sleep = <&rcpm 0x40000000>;
+			};
+
+			fm1mac3: ethernet@e4000 {
+				phy-handle = <&sgmii_aqr_phy3>;
+				phy-connection-type = "sgmii-2500";
+				sleep = <&rcpm 0x20000000>;
+			};
+
+			fm1mac4: ethernet@e6000 {
+				phy-handle = <&rgmii_rtk_phy1>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x10000000>;
+			};
+
+
+			mdio0: mdio@fc000 {
+				rgmii_rtk_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+				sgmii_rtk_phy2: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			xmdio0: mdio@fd000 {
+				sgmii_aqr_phy3: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+			};
+		};
 	};
 
 	pci0: pcie@ffe240000 {
@@ -159,4 +200,4 @@
 	};
 };
 
-/include/ "t1023si-post.dtsi"
+#include "t1023si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index 518ddaa8da2d..99e421df79d4 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -32,6 +32,8 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <dt-bindings/thermal/thermal.h>
+
 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
@@ -275,6 +277,90 @@
 		reg = <0xea000 0x4000>;
 	};
 
+	tmu: tmu@f0000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0xf0000 0x1000>;
+		interrupts = <18 2 0 0>;
+		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
+		fsl,tmu-calibration = <0x00000000 0x0000000f
+				       0x00000001 0x00000017
+				       0x00000002 0x0000001e
+				       0x00000003 0x00000026
+				       0x00000004 0x0000002e
+				       0x00000005 0x00000035
+				       0x00000006 0x0000003d
+				       0x00000007 0x00000044
+				       0x00000008 0x0000004c
+				       0x00000009 0x00000053
+				       0x0000000a 0x0000005b
+				       0x0000000b 0x00000064
+
+				       0x00010000 0x00000011
+				       0x00010001 0x0000001c
+				       0x00010002 0x00000024
+				       0x00010003 0x0000002b
+				       0x00010004 0x00000034
+				       0x00010005 0x00000039
+				       0x00010006 0x00000042
+				       0x00010007 0x0000004c
+				       0x00010008 0x00000051
+				       0x00010009 0x0000005a
+				       0x0001000a 0x00000063
+
+				       0x00020000 0x00000013
+				       0x00020001 0x00000019
+				       0x00020002 0x00000024
+				       0x00020003 0x0000002c
+				       0x00020004 0x00000035
+				       0x00020005 0x0000003d
+				       0x00020006 0x00000046
+				       0x00020007 0x00000050
+				       0x00020008 0x00000059
+
+				       0x00030000 0x00000002
+				       0x00030001 0x0000000d
+				       0x00030002 0x00000019
+				       0x00030003 0x00000024>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu1 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	scfg: global-utilities@fc000 {
 		compatible = "fsl,t1023-scfg";
 		reg = <0xfc000 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts
index 43cd5b50cd0a..772143da367f 100644
--- a/arch/powerpc/boot/dts/fsl/t1024qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts
@@ -87,7 +87,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,n25q128a11";  /* 16MB */
+				compatible = "micron,n25q128a11", "jedec,spi-nor";  /* 16MB */
 				reg = <0>;
 				spi-max-frequency = <10000000>;
 			};
@@ -95,7 +95,7 @@
 			flash@1 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "sst,sst25wf040";  /* 512KB */
+				compatible = "sst,sst25wf040", "jedec,spi-nor";  /* 512KB */
 				reg = <1>;
 				spi-max-frequency = <10000000>;
 			};
@@ -103,7 +103,7 @@
 			flash@2 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "eon,en25s64";   /* 8MB */
+				compatible = "eon,en25s64", "jedec,spi-nor";   /* 8MB */
 				reg = <2>;
 				spi-max-frequency = <10000000>;
 			};
@@ -248,4 +248,4 @@
 	};
 };
 
-/include/ "t1024si-post.dtsi"
+#include "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
index 429d8c73650a..302cdd22b4bb 100644
--- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts
@@ -89,7 +89,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,n25q512ax3";
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <10000000>; /* input clk */
 			};
@@ -140,6 +140,51 @@
 				#size-cells = <0>;
 			};
 		};
+
+		fman@400000 {
+			fm1mac1: ethernet@e0000 {
+				phy-handle = <&xg_aqr105_phy3>;
+				phy-connection-type = "xgmii";
+				sleep = <&rcpm 0x80000000>;
+			};
+
+			fm1mac2: ethernet@e2000 {
+				sleep = <&rcpm 0x40000000>;
+			};
+
+			fm1mac3: ethernet@e4000 {
+				phy-handle = <&rgmii_phy2>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x20000000>;
+			};
+
+			fm1mac4: ethernet@e6000 {
+				phy-handle = <&rgmii_phy1>;
+				phy-connection-type = "rgmii";
+				sleep = <&rcpm 0x10000000>;
+			};
+
+
+			mdio0: mdio@fc000 {
+				rgmii_phy1: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+				rgmii_phy2: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+			};
+
+			xmdio0: mdio@fd000 {
+				xg_aqr105_phy3: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+				sg_2500_aqr105_phy4: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+			};
+		};
 	};
 
 	pci0: pcie@ffe240000 {
@@ -188,4 +233,4 @@
 	};
 };
 
-/include/ "t1024si-post.dtsi"
+#include "t1024si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi
index 95e3af8d768e..bb480346a58d 100644
--- a/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1024si-post.dtsi
@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "t1023si-post.dtsi"
+#include "t1023si-post.dtsi"
 
 / {
 	aliases {
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
index 3e1528abf3f4..9d08a363bab3 100644
--- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -76,6 +76,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -85,6 +86,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			#cooling-cells = <2>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
index 681746efd31d..fb6bc02ebb60 100644
--- a/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts
@@ -43,4 +43,4 @@
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "t1040si-post.dtsi"
+#include "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1040qds.dts b/arch/powerpc/boot/dts/fsl/t1040qds.dts
index 4d298659468c..5f76edc7838c 100644
--- a/arch/powerpc/boot/dts/fsl/t1040qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040qds.dts
@@ -43,4 +43,4 @@
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "t1040si-post.dtsi"
+#include "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index 8f9e65b47515..621f2c6ee6ad 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -1,7 +1,7 @@
 /*
  * T1040RDB Device Tree Source
  *
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -38,6 +38,36 @@
 / {
 	model = "fsl,T1040RDB";
 	compatible = "fsl,T1040RDB";
+
+	aliases {
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+			};
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		cpld@3,0 {
 			compatible = "fsl,t1040rdb-cpld";
@@ -45,4 +75,4 @@
 	};
 };
 
-/include/ "t1040si-post.dtsi"
+#include "t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
index d30b3de1cfc5..e0f4da554774 100644
--- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
@@ -32,6 +32,8 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <dt-bindings/thermal/thermal.h>
+
 &bman_fbpr {
 	compatible = "fsl,bman-fbpr";
 	alloc-ranges = <0 0 0x10000 0>;
@@ -484,6 +486,98 @@
 		reg	   = <0xea000 0x4000>;
 	};
 
+	tmu: tmu@f0000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0xf0000 0x1000>;
+		interrupts = <18 2 0 0>;
+		fsl,tmu-range = <0xa0000 0x90026 0x8004a 0x1006a>;
+		fsl,tmu-calibration = <0x00000000 0x00000025
+				       0x00000001 0x00000028
+				       0x00000002 0x0000002d
+				       0x00000003 0x00000031
+				       0x00000004 0x00000036
+				       0x00000005 0x0000003a
+				       0x00000006 0x00000040
+				       0x00000007 0x00000044
+				       0x00000008 0x0000004a
+				       0x00000009 0x0000004f
+				       0x0000000a 0x00000054
+
+				       0x00010000 0x0000000d
+				       0x00010001 0x00000013
+				       0x00010002 0x00000019
+				       0x00010003 0x0000001f
+				       0x00010004 0x00000025
+				       0x00010005 0x0000002d
+				       0x00010006 0x00000033
+				       0x00010007 0x00000043
+				       0x00010008 0x0000004b
+				       0x00010009 0x00000053
+
+				       0x00020000 0x00000010
+				       0x00020001 0x00000017
+				       0x00020002 0x0000001f
+				       0x00020003 0x00000029
+				       0x00020004 0x00000031
+				       0x00020005 0x0000003c
+				       0x00020006 0x00000042
+				       0x00020007 0x0000004d
+				       0x00020008 0x00000056
+
+				       0x00030000 0x00000012
+				       0x00030001 0x0000001d>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+
+			thermal-sensors = <&tmu>;
+
+			trips {
+				cpu_alert: cpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit: cpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu1 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map2 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu2 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+				map3 {
+					trip = <&cpu_alert>;
+					cooling-device =
+						<&cpu3 THERMAL_NO_LIMIT
+							THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	scfg: global-utilities@fc000 {
 		compatible = "fsl,t1040-scfg";
 		reg = <0xfc000 0x1000>;
diff --git a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
index b245b31b8279..2a5a90dd272e 100644
--- a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts
@@ -50,4 +50,4 @@
 	};
 };
 
-/include/ "t1040si-post.dtsi"
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042qds.dts b/arch/powerpc/boot/dts/fsl/t1042qds.dts
index 4ab9bbe7c5c5..90a4a73bb905 100644
--- a/arch/powerpc/boot/dts/fsl/t1042qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042qds.dts
@@ -43,4 +43,4 @@
 	interrupt-parent = <&mpic>;
 };
 
-/include/ "t1042si-post.dtsi"
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
index 67af56bc5ee9..2c138627b1b4 100644
--- a/arch/powerpc/boot/dts/fsl/t1042rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts
@@ -1,7 +1,7 @@
 /*
  * T1042RDB Device Tree Source
  *
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -38,6 +38,34 @@
 / {
 	model = "fsl,T1042RDB";
 	compatible = "fsl,T1042RDB";
+
+	aliases {
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	soc@ffe000000 {
+		fman@400000 {
+			ethernet@e0000 {
+			       status = "disabled";
+			};
+
+			ethernet@e2000 {
+			       status = "disabled";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+			};
+		};
+	};
+
 	ifc: localbus@ffe124000 {
 		cpld@3,0 {
 			compatible = "fsl,t1042rdb-cpld";
@@ -45,4 +73,4 @@
 	};
 };
 
-/include/ "t1042si-post.dtsi"
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
index 2f67677530a4..8ec3ff45e6fc 100644
--- a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
+++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts
@@ -1,7 +1,7 @@
 /*
  * T1042RDB_PI Device Tree Source
  *
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -38,11 +38,13 @@
 / {
 	model = "fsl,T1042RDB_PI";
 	compatible = "fsl,T1042RDB_PI";
+
 	ifc: localbus@ffe124000 {
 		cpld@3,0 {
 			compatible = "fsl,t1042rdb_pi-cpld";
 		};
 	};
+
 	soc: soc@ffe000000 {
 		i2c@118000 {
 			rtc@68 {
@@ -51,7 +53,21 @@
 				interrupts = <0x2 0x1 0 0>;
 			};
 		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				status = "disabled";
+			};
+
+			ethernet@e2000 {
+				status = "disabled";
+			};
+
+			ethernet@e4000 {
+				status = "disabled";
+			};
+		};
 	};
 };
 
-/include/ "t1042si-post.dtsi"
+#include "t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
index 319b74f29724..a5544f93689c 100644
--- a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi
@@ -32,6 +32,6 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "t1040si-post.dtsi"
+#include "t1040si-post.dtsi"
 
 /* Place holder for ethernet related device tree nodes */
diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
index 3f6d7c6a106b..8c7ea6c05de9 100644
--- a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi
@@ -104,7 +104,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,n25q512ax3";
+				compatible = "micron,n25q512ax3", "jedec,spi-nor";
 				reg = <0>;
 				/* input clock */
 				spi-max-frequency = <10000000>;
diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
index 1498d1e4aecf..977af355b388 100644
--- a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
@@ -1,7 +1,7 @@
 /*
  * T104xQDS Device Tree Source
  *
- * Copyright 2013 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -38,6 +38,33 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		emi1_rgmii0 = &t1040mdio0;
+		emi1_rgmii1 = &t1040mdio1;
+		emi1_slot3 = &t1040mdio3;
+		emi1_slot5 = &t1040mdio5;
+		emi1_slot6 = &t1040mdio6;
+		emi1_slot7 = &t1040mdio7;
+		rgmii_phy1 = &rgmii_phy1;
+		rgmii_phy2 = &rgmii_phy2;
+		phy_s3_01 = &phy_s3_01;
+		phy_s3_02 = &phy_s3_02;
+		phy_s3_03 = &phy_s3_03;
+		phy_s3_04 = &phy_s3_04;
+		phy_s5_01 = &phy_s5_01;
+		phy_s5_02 = &phy_s5_02;
+		phy_s5_03 = &phy_s5_03;
+		phy_s5_04 = &phy_s5_04;
+		phy_s6_01 = &phy_s6_01;
+		phy_s6_02 = &phy_s6_02;
+		phy_s6_03 = &phy_s6_03;
+		phy_s6_04 = &phy_s6_04;
+		phy_s7_01 = &phy_s7_01;
+		phy_s7_02 = &phy_s7_02;
+		phy_s7_03 = &phy_s7_03;
+		phy_s7_04 = &phy_s7_04;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -85,6 +112,128 @@
 			#size-cells = <1>;
 			compatible = "fsl,fpga-qixis";
 			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio0>;
+				reg = <0x54 1>;
+				mux-mask = <0xe0>;
+
+				t1040mdio0: mdio@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x00>;
+					status = "disabled";
+
+					rgmii_phy1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+				};
+
+				t1040mdio1: mdio@20 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x20>;
+					status = "disabled";
+
+					rgmii_phy2: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+				};
+
+				t1040mdio3: mdio@60 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x60>;
+					status = "disabled";
+
+					phy_s3_01: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_s3_02: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_s3_03: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_s3_04: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t1040mdio5: mdio@a0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xa0>;
+
+					phy_s5_01: ethernet-phy@1c {
+						reg = <0x14>;
+					};
+
+					phy_s5_02: ethernet-phy@1d {
+						reg = <0x15>;
+					};
+
+					phy_s5_03: ethernet-phy@1e {
+						reg = <0x16>;
+					};
+
+					phy_s5_04: ethernet-phy@1f {
+						reg = <0x17>;
+					};
+				};
+
+				t1040mdio6: mdio@c0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xc0>;
+
+					phy_s6_01: ethernet-phy@1c {
+						reg = <0x18>;
+					};
+
+					phy_s6_02: ethernet-phy@1d {
+						reg = <0x19>;
+					};
+
+					phy_s6_03: ethernet-phy@1e {
+						reg = <0x1a>;
+					};
+
+					phy_s6_04: ethernet-phy@1f {
+						reg = <0x1b>;
+					};
+				};
+
+				t1040mdio7: mdio@e0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0xe0>;
+					status = "disabled";
+
+					phy_s7_01: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					phy_s7_02: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					phy_s7_03: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					phy_s7_04: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
 		};
 	};
 
@@ -112,7 +261,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,n25q128a11";
+				compatible = "micron,n25q128a11", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <10000000>; /* input clock */
 			};
@@ -129,6 +278,33 @@
 				interrupts = <0x1 0x1 0 0>;
 			};
 		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_s7_03>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&rgmii_phy1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&rgmii_phy2>;
+				phy-connection-type = "rgmii";
+			};
+		};
 	};
 
 	pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
index 830ea484295b..72691ef102ee 100644
--- a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi
@@ -1,7 +1,7 @@
 /*
  * T1040RDB/T1042RDB Device Tree Source
  *
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -33,6 +33,12 @@
  */
 
 / {
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -103,10 +109,15 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,n25q512a";
+				compatible = "micron,n25q512a", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <10000000>; /* input clock */
 			};
+			slic@3 {
+				compatible = "maxim,ds26522";
+				reg = <3>;
+				spi-max-frequency = <2000000>; /* input clock */
+			};
 		};
 
 		i2c@118000 {
@@ -125,6 +136,31 @@
 			};
 		};
 
+		fman@400000 {
+			ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+
+				phy_rgmii_0: ethernet-phy@01 {
+					reg = <0x01>;
+				};
+
+				phy_rgmii_1: ethernet-phy@02 {
+					reg = <0x02>;
+				};
+			};
+		};
 	};
 
 	pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
index fcfa38ae5e02..6db0ee8b1384 100644
--- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi
@@ -76,6 +76,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -85,6 +86,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			#cooling-cells = <2>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -94,6 +96,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			#cooling-cells = <2>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -103,6 +106,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_4>;
+			#cooling-cells = <2>;
 			L2_4: l2-cache {
 				next-level-cache = <&cpc>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts
index 9c8e10fe04cb..8d190e8c62ce 100644
--- a/arch/powerpc/boot/dts/fsl/t2080qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts
@@ -1,7 +1,7 @@
 /*
  * T2080QDS Device Tree Source
  *
- * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -42,6 +42,12 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		emi1_slot1 = &t2080mdio2;
+		emi1_slot2 = &t2080mdio3;
+		emi1_slot3 = &t2080mdio4;
+	};
+
 	rio: rapidio@ffe0c0000 {
 		reg = <0xf 0xfe0c0000 0 0x11000>;
 
@@ -54,4 +60,154 @@
 	};
 };
 
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&phy_sgmii_s3_1e>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&phy_sgmii_s3_1f>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e8000 {
+			phy-handle = <&phy_sgmii_s2_1e>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@ea000 {
+			phy-handle = <&phy_sgmii_s2_1d>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&phy_xaui_slot3>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&phy_sgmii_s3_1f>;
+			phy-connection-type = "xgmii";
+		};
+
+		mdio@fd000 {
+			phy_xaui_slot3: ethernet-phy@3 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x3>;
+			};
+		};
+	};
+};
+
+&boardctrl {
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;
+		mux-mask = <0xe0>;
+
+		t2080mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		t2080mdio1: mdio@20 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x20>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		t2080mdio2: mdio@40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40>;
+			status = "disabled";
+
+			phy_sgmii_s1_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s1_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s1_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s1_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2080mdio3: mdio@c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc0>;
+
+			phy_sgmii_s2_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s2_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s2_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s2_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2080mdio4: mdio@60 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60>;
+			status = "disabled";
+
+			phy_sgmii_s3_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s3_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s3_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s3_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
 /include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
index 33205bf08919..836e4c965b22 100644
--- a/arch/powerpc/boot/dts/fsl/t2080rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts
@@ -1,7 +1,7 @@
 /*
  * T2080PCIe-RDB Board Device Tree Source
  *
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -54,4 +54,69 @@
 	};
 };
 
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&xg_aq1202_phy3>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&xg_aq1202_phy4>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&xg_cs4315_phy1>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&xg_cs4315_phy2>;
+			phy-connection-type = "xgmii";
+		};
+
+		mdio@fc000 {
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		mdio@fd000 {
+			xg_cs4315_phy1: ethernet-phy@c {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0xc>;
+			};
+
+			xg_cs4315_phy2: ethernet-phy@d {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0xd>;
+			};
+
+			xg_aq1202_phy3: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x0>;
+			};
+
+			xg_aq1202_phy4: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				reg = <0x1>;
+			};
+		};
+	};
+};
+
 /include/ "t2080si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts
index b81213596dbf..fc5c4a30f7ad 100644
--- a/arch/powerpc/boot/dts/fsl/t2081qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts
@@ -1,7 +1,7 @@
 /*
  * T2081QDS Device Tree Source
  *
- * Copyright 2013 Freescale Semiconductor Inc.
+ * Copyright 2013 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,225 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
+
+	aliases {
+		emi1_slot1 = &t2081mdio2;
+		emi1_slot2 = &t2081mdio3;
+		emi1_slot3 = &t2081mdio4;
+		emi1_slot5 = &t2081mdio5;
+		emi1_slot6 = &t2081mdio6;
+		emi1_slot7 = &t2081mdio7;
+	};
+};
+
+&soc {
+	fman@400000 {
+		ethernet@e0000 {
+			phy-handle = <&phy_sgmii_s7_1c>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@e2000 {
+			phy-handle = <&phy_sgmii_s7_1d>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@e4000 {
+			phy-handle = <&rgmii_phy1>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e6000 {
+			phy-handle = <&rgmii_phy2>;
+			phy-connection-type = "rgmii";
+		};
+
+		ethernet@e8000 {
+			phy-handle = <&phy_sgmii_s3_1c>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@ea000 {
+			phy-handle = <&phy_sgmii_s7_1f>;
+			phy-connection-type = "sgmii";
+		};
+
+		ethernet@f0000 {
+			phy-handle = <&phy_sgmii_s2_1c>;
+			phy-connection-type = "xgmii";
+		};
+
+		ethernet@f2000 {
+			phy-handle = <&phy_sgmii_s7_1e>;
+			phy-connection-type = "xgmii";
+		};
+	};
+};
+
+&boardctrl {
+	mdio-mux-emi1 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x54 1>;
+		mux-mask = <0xe0>;
+
+		t2081mdio0: mdio@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			rgmii_phy1: ethernet-phy@1 {
+				reg = <0x1>;
+			};
+		};
+
+		t2081mdio1: mdio@20 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x20>;
+
+			rgmii_phy2: ethernet-phy@2 {
+				reg = <0x2>;
+			};
+		};
+
+		t2081mdio2: mdio@40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40>;
+
+			phy_sgmii_s1_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s1_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s1_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s1_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio3: mdio@60 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x60>;
+
+			phy_sgmii_s2_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s2_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s2_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s2_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio4: mdio@80 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x80>;
+			status = "disabled";
+
+			phy_sgmii_s3_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s3_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s3_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s3_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio5: mdio@a0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xa0>;
+			status = "disabled";
+
+			phy_sgmii_s5_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s5_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s5_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s5_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio6: mdio@c0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xc0>;
+			status = "disabled";
+
+			phy_sgmii_s6_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s6_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s6_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s6_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+
+		t2081mdio7: mdio@e0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xe0>;
+
+			phy_sgmii_s7_1c: ethernet-phy@1c {
+				reg = <0x1c>;
+			};
+
+			phy_sgmii_s7_1d: ethernet-phy@1d {
+				reg = <0x1d>;
+			};
+
+			phy_sgmii_s7_1e: ethernet-phy@1e {
+				reg = <0x1e>;
+			};
+
+			phy_sgmii_s7_1f: ethernet-phy@1f {
+				reg = <0x1f>;
+			};
+		};
+	};
 };
 
 /include/ "t2081si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
index 869f9159b4d1..ec080bd01b09 100644
--- a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi
@@ -112,7 +112,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,n25q128a11"; /* 16MB */
+				compatible = "micron,n25q128a11", "jedec,spi-nor"; /* 16MB */
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 			};
@@ -120,7 +120,7 @@
 			flash@1 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
 				reg = <1>;
 				spi-max-frequency = <35000000>;
 			};
@@ -128,7 +128,7 @@
 			flash@2 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "eon,en25s64";
+				compatible = "eon,en25s64", "jedec,spi-nor";
 				reg = <2>;
 				spi-max-frequency = <35000000>;
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
index 693d2a8fa01c..dc9326875778 100644
--- a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi
@@ -113,7 +113,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "micron,n25q512a";
+				compatible = "micron,n25q512a", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <10000000>; /* input clock */
 			};
diff --git a/arch/powerpc/boot/dts/fsl/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts
index c067a6533809..9573ceada07c 100644
--- a/arch/powerpc/boot/dts/fsl/t4240qds.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts
@@ -1,7 +1,7 @@
 /*
  * T4240QDS Device Tree Source
  *
- * Copyright 2012 - 2014 Freescale Semiconductor Inc.
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,44 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases{
+		phy_rgmii1 = &phyrgmii1;
+		phy_rgmii2 = &phyrgmii2;
+		phy_sgmii3 = &phy3;
+		phy_sgmii4 = &phy4;
+		phy_sgmii11 = &phy11;
+		phy_sgmii12 = &phy12;
+		sgmii_phy11 = &sgmiiphy11;
+		sgmii_phy12 = &sgmiiphy12;
+		sgmii_phy13 = &sgmiiphy13;
+		sgmii_phy14 = &sgmiiphy14;
+		sgmii_phy21 = &sgmiiphy21;
+		sgmii_phy22 = &sgmiiphy22;
+		sgmii_phy23 = &sgmiiphy23;
+		sgmii_phy24 = &sgmiiphy24;
+		sgmii_phy31 = &sgmiiphy31;
+		sgmii_phy32 = &sgmiiphy32;
+		sgmii_phy33 = &sgmiiphy33;
+		sgmii_phy34 = &sgmiiphy34;
+		sgmii_phy41 = &sgmiiphy41;
+		sgmii_phy42 = &sgmiiphy42;
+		sgmii_phy43 = &sgmiiphy43;
+		sgmii_phy44 = &sgmiiphy44;
+		phy_xfi1 = &xfiphy1;
+		phy_xfi2 = &xfiphy2;
+		phy_xfi3 = &xfiphy3;
+		phy_xfi4 = &xfiphy4;
+		xfi_pcs_mdio1 = &xfimdio0;
+		xfi_pcs_mdio2 = &xfimdio1;
+		xfi_pcs_mdio3 = &xfimdio2;
+		xfi_pcs_mdio4 = &xfimdio3;
+		emi1_rgmii = &t4240mdio0;
+		emi1_slot1 = &t4240mdio1;
+		emi1_slot2 = &t4240mdio2;
+		emi1_slot3 = &t4240mdio3;
+		emi1_slot4 = &t4240mdio4;
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -91,8 +129,190 @@
 		};
 
 		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis";
 			reg = <3 0 0x300>;
+			ranges = <0 3 0 0x300>;
+
+			mdio-mux-emi1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mdio-mux-mmioreg", "mdio-mux";
+				mdio-parent-bus = <&mdio1>;
+				reg = <0x54 1>;
+				mux-mask = <0xe0>;
+
+				t4240mdio0: mdio@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					phyrgmii1: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+
+					phyrgmii2: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+				};
+
+				t4240mdio1: mdio@20 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x20>;
+					status = "disabled";
+
+					phy1: ethernet-phy@0 {
+						reg = <0x0>;
+					};
+
+					phy2: ethernet-phy@1 {
+						reg = <0x1>;
+					};
+
+					phy3: ethernet-phy@2 {
+						reg = <0x2>;
+					};
+
+					phy4: ethernet-phy@3 {
+						reg = <0x3>;
+					};
+
+					sgmiiphy11: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy12: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy13: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy14: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio2: mdio@40 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x40>;
+					status = "disabled";
+
+					phy5: ethernet-phy@4 {
+						reg = <0x4>;
+					};
+
+					phy6: ethernet-phy@5 {
+						reg = <0x5>;
+					};
+
+					phy7: ethernet-phy@6 {
+						reg = <0x6>;
+					};
+
+					phy8: ethernet-phy@7 {
+						reg = <0x7>;
+					};
+
+					sgmiiphy21: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy22: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy23: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy24: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio3: mdio@60 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x60>;
+					status = "disabled";
+
+					phy9: ethernet-phy@8 {
+						reg = <0x8>;
+					};
+
+					phy10: ethernet-phy@9 {
+						reg = <0x9>;
+					};
+
+					phy11: ethernet-phy@a {
+						reg = <0xa>;
+					};
+
+					phy12: ethernet-phy@b {
+						reg = <0xb>;
+					};
+
+					sgmiiphy31: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy32: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy33: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy34: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+
+				t4240mdio4: mdio@80 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x80>;
+					status = "disabled";
+
+					phy13: ethernet-phy@c {
+						reg = <0xc>;
+					};
+
+					phy14: ethernet-phy@d {
+						reg = <0xd>;
+					};
+
+					phy15: ethernet-phy@e {
+						reg = <0xe>;
+					};
+
+					phy16: ethernet-phy@f {
+						reg = <0xf>;
+					};
+
+					sgmiiphy41: ethernet-phy@1c {
+						reg = <0x1c>;
+					};
+
+					sgmiiphy42: ethernet-phy@1d {
+						reg = <0x1d>;
+					};
+
+					sgmiiphy43: ethernet-phy@1e {
+						reg = <0x1e>;
+					};
+
+					sgmiiphy44: ethernet-phy@1f {
+						reg = <0x1f>;
+					};
+				};
+			};
 		};
 	};
 
@@ -138,7 +358,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 			};
@@ -234,6 +454,184 @@
 		sdhc@114000 {
 			voltage-ranges = <1800 1800 3300 3300>;
 		};
+
+		fman@400000 {
+			port@83000 {
+				status = "disabled";
+			};
+
+			port@84000 {
+				status = "disabled";
+			};
+
+			port@85000 {
+				status = "disabled";
+			};
+
+			port@86000 {
+				status = "disabled";
+			};
+
+			port@87000 {
+				status = "disabled";
+			};
+
+			ethernet@e0000 {
+				phy-handle = <&phy5>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy6>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy7>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy8>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phyrgmii2>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy2>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xauiphy1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xauiphy2>;
+				phy-connection-type = "xgmii";
+			};
+
+			xfimdio0: mdio@f1000 {
+				status = "disabled";
+
+				xfiphy1: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			xfimdio1: mdio@f3000 {
+				status = "disabled";
+
+				xfiphy2: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+		};
+
+		fman@500000 {
+			port@84000 {
+				status = "disabled";
+			};
+
+			port@85000 {
+				status = "disabled";
+			};
+
+			port@86000 {
+				status = "disabled";
+			};
+
+			port@87000 {
+				status = "disabled";
+			};
+
+			ethernet@e0000 {
+				phy-handle = <&phy13>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy14>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy15>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy16>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				phy-handle = <&phyrgmii1>;
+				phy-connection-type = "rgmii";
+			};
+
+			ethernet@ea000 {
+				phy-handle = <&phy10>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xauiphy3>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xauiphy4>;
+				phy-connection-type = "xgmii";
+			};
+
+			xfimdio2: mdio@f1000 {
+				status = "disabled";
+
+				xfiphy3: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			xfimdio3: mdio@f3000 {
+				status = "disabled";
+
+				xfiphy4: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+			};
+
+			mdio@fd000 {
+				xauiphy1: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x0>;
+				};
+
+				xauiphy2: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x1>;
+				};
+
+				xauiphy3: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x2>;
+				};
+
+				xauiphy4: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x3>;
+				};
+			};
+		};
 	};
 
 	pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
index 6e820a875621..cc0a264b8acb 100644
--- a/arch/powerpc/boot/dts/fsl/t4240rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts
@@ -1,7 +1,7 @@
 /*
  * T4240RDB Device Tree Source
  *
- * Copyright 2014 Freescale Semiconductor Inc.
+ * Copyright 2014 - 2015 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,17 @@
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
 
+	aliases {
+		sgmii_phy21 = &sgmiiphy21;
+		sgmii_phy22 = &sgmiiphy22;
+		sgmii_phy23 = &sgmiiphy23;
+		sgmii_phy24 = &sgmiiphy24;
+		sgmii_phy41 = &sgmiiphy41;
+		sgmii_phy42 = &sgmiiphy42;
+		sgmii_phy43 = &sgmiiphy43;
+		sgmii_phy44 = &sgmiiphy44;
+	};
+
 	ifc: localbus@ffe124000 {
 		reg = <0xf 0xfe124000 0 0x2000>;
 		ranges = <0 0 0xf 0xe8000000 0x08000000
@@ -107,7 +118,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "sst,sst25wf040";
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>; /* input clock */
 			};
@@ -136,6 +147,142 @@
 		sdhc@114000 {
 			voltage-ranges = <1800 1800 3300 3300>;
 		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&sgmiiphy21>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&sgmiiphy22>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&sgmiiphy23>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&sgmiiphy24>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				status = "disabled";
+			};
+
+			ethernet@ea000 {
+				status = "disabled";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xfiphy1>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xfiphy2>;
+				phy-connection-type = "xgmii";
+			};
+		};
+
+		fman@500000 {
+			ethernet@e0000 {
+				phy-handle = <&sgmiiphy41>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&sgmiiphy42>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&sgmiiphy43>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&sgmiiphy44>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e8000 {
+				status = "disabled";
+			};
+
+			ethernet@ea000 {
+				status = "disabled";
+			};
+
+			ethernet@f0000 {
+				phy-handle = <&xfiphy3>;
+				phy-connection-type = "xgmii";
+			};
+
+			ethernet@f2000 {
+				phy-handle = <&xfiphy4>;
+				phy-connection-type = "xgmii";
+			};
+
+			mdio@fc000 {
+				sgmiiphy21: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				sgmiiphy22: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+
+				sgmiiphy23: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+
+				sgmiiphy24: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+
+				sgmiiphy41: ethernet-phy@4 {
+					reg = <0x4>;
+				};
+
+				sgmiiphy42: ethernet-phy@5 {
+					reg = <0x5>;
+				};
+
+				sgmiiphy43: ethernet-phy@6 {
+					reg = <0x6>;
+				};
+
+				sgmiiphy44: ethernet-phy@7 {
+					reg = <0x7>;
+				};
+			};
+
+			mdio@fd000 {
+				xfiphy1: ethernet-phy@10 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x10>;
+				};
+
+				xfiphy2: ethernet-phy@11 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x11>;
+				};
+
+				xfiphy3: ethernet-phy@13 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x13>;
+				};
+
+				xfiphy4: ethernet-phy@12 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <0x12>;
+				};
+			};
+		};
 	};
 
 	pci0: pcie@ffe240000 {
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
deleted file mode 100644
index 83eb0fda2666..000000000000
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ /dev/null
@@ -1,425 +0,0 @@
-/*
- * GE PPC9A Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts
- */
-
-/dts-v1/;
-
-/ {
-	model = "GEF_PPC9A";
-	compatible = "gef,ppc9a";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;	// set by uboot
-	};
-
-	localbus@fef05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xfef05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xe8000000 0x08000000	// Paged Flash 0
-			  2 0 0xe0000000 0x08000000	// Paged Flash 1
-			  3 0 0xfc100000 0x00020000	// NVRAM
-			  4 0 0xfc000000 0x00008000	// FPGA
-			  5 0 0xfc008000 0x00008000	// AFIX FPGA
-			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
-			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
-
-		/* flash@0,0 is a mirror of part of the memory in flash@1,0
-		flash@0,0 {
-			compatible = "gef,ppc9a-firmware-mirror", "cfi-flash";
-			reg = <0x0 0x0 0x1000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x1000000>;
-				read-only;
-			};
-		};
-		*/
-
-		flash@1,0 {
-			compatible = "gef,ppc9a-paged-flash", "cfi-flash";
-			reg = <0x1 0x0 0x8000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "user";
-				reg = <0x0 0x7800000>;
-			};
-			partition@7800000 {
-				label = "firmware";
-				reg = <0x7800000 0x800000>;
-				read-only;
-			};
-		};
-
-		nvram@3,0 {
-			device_type = "nvram";
-			compatible = "simtek,stk14ca8";
-			reg = <0x3 0x0 0x20000>;
-		};
-
-		fpga@4,0 {
-			compatible = "gef,ppc9a-fpga-regs";
-			reg = <0x4 0x0 0x40>;
-		};
-
-		wdt@4,2000 {
-			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2000 0x8>;
-			interrupts = <0x1a 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		/* Second watchdog available, driver currently supports one.
-		wdt@4,2010 {
-			compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2010 0x8>;
-			interrupts = <0x1b 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		*/
-		gef_pic: pic@4,4000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00";
-			reg = <0x4 0x4000 0x20>;
-			interrupts = <0x8
-				      0x9>;
-			interrupt-parent = <&mpic>;
-
-		};
-		gef_gpio: gpio@7,14000 {
-			#gpio-cells = <2>;
-			compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio";
-			reg = <0x7 0x14000 0x24>;
-			gpio-controller;
-		};
-	};
-
-	soc@fef00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		compatible = "fsl,mpc8641-soc", "simple-bus";
-		ranges = <0x0 0xfef00000 0x00100000>;
-		bus-frequency = <33333333>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c1: i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			hwmon@48 {
-				compatible = "national,lm92";
-				reg = <0x48>;
-			};
-
-			hwmon@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			rtc@51 {
-				compatible = "epson,rx8581";
-				reg = <0x00000051>;
-			};
-
-			eti@6b {
-				compatible = "dallas,ds1682";
-				reg = <0x6b>;
-			};
-		};
-
-		i2c2: i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x9 0x4>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x8 0x4>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x1c 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@fef08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef08000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
-			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
-		>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
deleted file mode 100644
index d426dd3de9ef..000000000000
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * GE SBC310 Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts
- */
-
-/dts-v1/;
-
-/ {
-	model = "GEF_SBC310";
-	compatible = "gef,sbc310";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;	// set by uboot
-	};
-
-	localbus@fef05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xfef05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xe0000000 0x08000000	// Paged Flash 0
-			  2 0 0xe8000000 0x08000000	// Paged Flash 1
-			  3 0 0xfc100000 0x00020000	// NVRAM
-			  4 0 0xfc000000 0x00010000>;	// FPGA
-
-		/* flash@0,0 is a mirror of part of the memory in flash@1,0
-		flash@0,0 {
-			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
-			reg = <0x0 0x0 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x01000000>;
-				read-only;
-			};
-		};
-		*/
-
-		flash@1,0 {
-			compatible = "gef,sbc310-paged-flash", "cfi-flash";
-			reg = <0x1 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "user";
-				reg = <0x0 0x7800000>;
-			};
-			partition@7800000 {
-				label = "firmware";
-				reg = <0x7800000 0x800000>;
-				read-only;
-			};
-		};
-
-		nvram@3,0 {
-			device_type = "nvram";
-			compatible = "simtek,stk14ca8";
-			reg = <0x3 0x0 0x20000>;
-		};
-
-		fpga@4,0 {
-			compatible = "gef,fpga-regs";
-			reg = <0x4 0x0 0x40>;
-		};
-
-		wdt@4,2000 {
-			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2000 0x8>;
-			interrupts = <0x1a 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-/*
-		wdt@4,2010 {
-			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
-				"gef,fpga-wdt";
-			reg = <0x4 0x2010 0x8>;
-			interrupts = <0x1b 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-*/
-		gef_pic: pic@4,4000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
-			reg = <0x4 0x4000 0x20>;
-			interrupts = <0x8
-				      0x9>;
-			interrupt-parent = <&mpic>;
-
-		};
-		gef_gpio: gpio@4,8000 {
-			#gpio-cells = <2>;
-			compatible = "gef,sbc310-gpio";
-			reg = <0x4 0x8000 0x24>;
-			gpio-controller;
-		};
-	};
-
-	soc@fef00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		compatible = "fsl,mpc8641-soc", "simple-bus";
-		ranges = <0x0 0xfef00000 0x00100000>;
-		bus-frequency = <33333333>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c1: i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			rtc@51 {
-				compatible = "epson,rx8581";
-				reg = <0x00000051>;
-			};
-		};
-
-		i2c2: i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			hwmon@48 {
-				compatible = "national,lm92";
-				reg = <0x48>;
-			};
-
-			hwmon@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			eti@6b {
-				compatible = "dallas,ds1682";
-				reg = <0x6b>;
-			};
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x9 0x4>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x8 0x4>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x1c 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@fef08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef08000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
-			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x2
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x2
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x2
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x2
-		>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-
-	pci1: pcie@fef09000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef09000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x19 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
-			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
-			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
-			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xc0000000
-				  0x02000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
deleted file mode 100644
index 5db3399b76b7..000000000000
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * GE SBC610 Device Tree Source
- *
- * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Based on: SBS CM6 Device Tree Source
- * Copyright 2007 SBS Technologies GmbH & Co. KG
- * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
- * Copyright 2006 Freescale Semiconductor Inc.
- */
-
-/*
- * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
- */
-
-/dts-v1/;
-
-/ {
-	model = "GEF_SBC610";
-	compatible = "gef,sbc610";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <32768>;		// L1, 32K
-			i-cache-size = <32768>;		// L1, 32K
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;	// set by uboot
-	};
-
-	localbus@fef05000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xfef05000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xe8000000 0x08000000	// Paged Flash 0
-			  2 0 0xe0000000 0x08000000	// Paged Flash 1
-			  3 0 0xfc100000 0x00020000	// NVRAM
-			  4 0 0xfc000000 0x00008000	// FPGA
-			  5 0 0xfc008000 0x00008000	// AFIX FPGA
-			  6 0 0xfd000000 0x00800000	// IO FPGA (8-bit)
-			  7 0 0xfd800000 0x00800000>;	// IO FPGA (32-bit)
-
-		/* flash@0,0 is a mirror of part of the memory in flash@1,0
-		flash@0,0 {
-			compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
-			reg = <0x0 0x0 0x1000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "firmware";
-				reg = <0x0 0x1000000>;
-				read-only;
-			};
-		};
-		*/
-
-		flash@1,0 {
-			compatible = "gef,sbc610-paged-flash", "cfi-flash";
-			reg = <0x1 0x0 0x8000000>;
-			bank-width = <4>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "user";
-				reg = <0x0 0x7800000>;
-			};
-			partition@7800000 {
-				label = "firmware";
-				reg = <0x7800000 0x800000>;
-				read-only;
-			};
-		};
-
-		nvram@3,0 {
-			device_type = "nvram";
-			compatible = "simtek,stk14ca8";
-			reg = <0x3 0x0 0x20000>;
-		};
-
-		fpga@4,0 {
-			compatible = "gef,fpga-regs";
-			reg = <0x4 0x0 0x40>;
-		};
-
-		wdt@4,2000 {
-			compatible = "gef,fpga-wdt";
-			reg = <0x4 0x2000 0x8>;
-			interrupts = <0x1a 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		/* Second watchdog available, driver currently supports one.
-		wdt@4,2010 {
-			compatible = "gef,fpga-wdt";
-			reg = <0x4 0x2010 0x8>;
-			interrupts = <0x1b 0x4>;
-			interrupt-parent = <&gef_pic>;
-		};
-		*/
-		gef_pic: pic@4,4000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "gef,fpga-pic";
-			reg = <0x4 0x4000 0x20>;
-			interrupts = <0x8
-				      0x9>;
-			interrupt-parent = <&mpic>;
-
-		};
-		gef_gpio: gpio@7,14000 {
-			#gpio-cells = <2>;
-			compatible = "gef,sbc610-gpio";
-			reg = <0x7 0x14000 0x24>;
-			gpio-controller;
-		};
-	};
-
-	soc@fef00000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#interrupt-cells = <2>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xfef00000 0x00100000>;
-		bus-frequency = <33333333>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c1: i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-
-			hwmon@48 {
-				compatible = "national,lm92";
-				reg = <0x48>;
-			};
-
-			hwmon@4c {
-				compatible = "adi,adt7461";
-				reg = <0x4c>;
-			};
-
-			rtc@51 {
-				compatible = "epson,rx8581";
-				reg = <0x00000051>;
-			};
-
-			eti@6b {
-				compatible = "dallas,ds1682";
-				reg = <0x6b>;
-			};
-		};
-
-		i2c2: i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-					   "fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x9 0x4>;
-					reg = <1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&gef_pic>;
-					interrupts = <0x8 0x4>;
-					reg = <3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "gmii";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x2a 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <0x1c 0x2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		msi@41600 {
-			compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
-			reg = <0x41600 0x80>;
-			msi-available-ranges = <0 0x100>;
-			interrupts = <
-				0xe0 0
-				0xe1 0
-				0xe2 0
-				0xe3 0
-				0xe4 0
-				0xe5 0
-				0xe6 0
-				0xe7 0>;
-			interrupt-parent = <&mpic>;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@fef08000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xfef08000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
-			  0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <0x18 0x2>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
-		>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x40000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00400000>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
deleted file mode 100644
index 631ede72e226..000000000000
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * SBC8641D Device Tree Source
- *
- * Copyright 2008 Wind River Systems Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "SBC8641D";
-	compatible = "wind,sbc8641";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8641@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;		// L1
-			i-cache-size = <32768>;		// L1
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-		PowerPC,8641@1 {
-			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// From uboot
-			bus-frequency = <0>;		// From uboot
-			clock-frequency = <0>;		// From uboot
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;	// 512M at 0x0
-	};
-
-	localbus@f8005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8641-localbus", "simple-bus";
-		reg = <0xf8005000 0x1000>;
-		interrupts = <19 2>;
-		interrupt-parent = <&mpic>;
-
-		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
-			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
-			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
-			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
-			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
-			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
-			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
-
-		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
-			bank-width = <2>;
-			device-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "dtb";
-				reg = <0x00000000 0x00100000>;
-				read-only;
-			};
-			partition@300000 {
-				label = "kernel";
-				reg = <0x00100000 0x00400000>;
-				read-only;
-			};
-			partition@400000 {
-				label = "fs";
-				reg = <0x00500000 0x00a00000>;
-			};
-			partition@700000 {
-				label = "firmware";
-				reg = <0x00f00000 0x00100000>;
-				read-only;
-			};
-		};
-
-		epld@2,0 {
-			compatible = "wrs,epld-localbus";
-			#address-cells = <2>;
-			#size-cells = <1>;
-			reg = <2 0 0x100000>;
-			ranges = <0 0 5 0 1	// User switches
-				  1 0 5 1 1	// Board ID/Rev
-				  3 0 5 3 1>;	// LEDs
-		};
-	};
-
-	soc@f8000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x00000000 0xf8000000 0x00100000>;
-		bus-frequency = <0>;
-
-		mcm-law@0 {
-			compatible = "fsl,mcm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <10>;
-		};
-
-		mcm@1000 {
-			compatible = "fsl,mpc8641-mcm", "fsl,mcm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8641-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30  2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@1f {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0x1f>;
-				};
-				phy1: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <0>;
-				};
-				phy2: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <1>;
-				};
-				phy3: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <10 1>;
-					reg = <2>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <31 2 32 2 33 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet3: ethernet@27000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <3>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x27000 0x1000>;
-			ranges = <0x0 0x27000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <37 2 38 2 39 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-			phy-connection-type = "rgmii-id";
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi3: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <28 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		mpic: pic@40000 {
-			clock-frequency = <0>;
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-			big-endian;
-		};
-
-		global-utilities@e0000 {
-			compatible = "fsl,mpc8641-guts";
-			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
-		};
-	};
-
-	pci0: pcie@f8008000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xf8008000 0x1000>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		interrupt-map-mask = <0xff00 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 0 1
-			0x0000 0 0 2 &mpic 1 1
-			0x0000 0 0 3 &mpic 2 1
-			0x0000 0 0 4 &mpic 3 1
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0x80000000
-				  0x02000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00100000>;
-		};
-
-	};
-
-	pci1: pcie@f8009000 {
-		compatible = "fsl,mpc8641-pcie";
-		device_type = "pci";
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xf8009000 0x1000>;
-		bus-range = <0 0xff>;
-		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
-		clock-frequency = <33333333>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <
-			/* IDSEL 0x0 */
-			0x0000 0 0 1 &mpic 4 1
-			0x0000 0 0 2 &mpic 5 1
-			0x0000 0 0 3 &mpic 6 1
-			0x0000 0 0 4 &mpic 7 1
-			>;
-
-		pcie@0 {
-			reg = <0 0 0 0 0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			device_type = "pci";
-			ranges = <0x02000000 0x0 0xa0000000
-				  0x02000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x01000000 0x0 0x00000000
-				  0x01000000 0x0 0x00000000
-				  0x0 0x00100000>;
-		};
-	};
-};
diff --git a/arch/powerpc/boot/rs6000.h b/arch/powerpc/boot/rs6000.h
index 433f45084e41..d70517ccc0f7 100644
--- a/arch/powerpc/boot/rs6000.h
+++ b/arch/powerpc/boot/rs6000.h
@@ -239,5 +239,5 @@ struct external_reloc {
 #define DEFAULT_DATA_SECTION_ALIGNMENT 4
 #define DEFAULT_BSS_SECTION_ALIGNMENT 4
 #define DEFAULT_TEXT_SECTION_ALIGNMENT 4
-/* For new sections we havn't heard of before */
+/* For new sections we haven't heard of before */
 #define DEFAULT_SECTION_ALIGNMENT 4
diff --git a/arch/powerpc/boot/treeboot-akebono.c b/arch/powerpc/boot/treeboot-akebono.c
index b73174c34fe4..bcc5902f8462 100644
--- a/arch/powerpc/boot/treeboot-akebono.c
+++ b/arch/powerpc/boot/treeboot-akebono.c
@@ -38,7 +38,7 @@
 
 BSS_STACK(4096);
 
-#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+#define SPRN_PIR	0x11E	/* Processor Identification Register */
 #define USERDATA_LEN	256	/* Length of userdata passed in by PIBS */
 #define MAX_RANKS	0x4
 #define DDR3_MR0CF	0x80010011U
diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c
index 925ae43b7467..303d2074ee56 100644
--- a/arch/powerpc/boot/treeboot-currituck.c
+++ b/arch/powerpc/boot/treeboot-currituck.c
@@ -80,7 +80,7 @@ static void ibm_currituck_fixups(void)
 	}
 }
 
-#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+#define SPRN_PIR	0x11E	/* Processor Identification Register */
 void platform_init(void)
 {
 	unsigned long end_of_ram, avail_ram;
diff --git a/arch/powerpc/boot/treeboot-iss4xx.c b/arch/powerpc/boot/treeboot-iss4xx.c
index 329e710feda2..733f8bf25184 100644
--- a/arch/powerpc/boot/treeboot-iss4xx.c
+++ b/arch/powerpc/boot/treeboot-iss4xx.c
@@ -59,7 +59,7 @@ static void *iss_4xx_vmlinux_alloc(unsigned long size)
 	return (void *)ibm4xx_memstart;
 }
 
-#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+#define SPRN_PIR	0x11E	/* Processor Identification Register */
 void platform_init(void)
 {
 	unsigned long end_of_ram = 0x08000000;
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index ceaa75d5a684..6a19fcef5596 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -154,7 +154,7 @@ if [ -z "$kernel" ]; then
     kernel=vmlinux
 fi
 
-elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
+LANG=C elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
 case "$elfformat" in
     elf64-powerpcle)	format=elf64lppc	;;
     elf64-powerpc)	format=elf32ppc	;;
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 2a5fdcbabcdd..87fc15bce407 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -35,7 +35,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_IDE=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_SPI_ATTRS=y
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 3be85c5f1a2a..6f753a71fe5d 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -34,7 +34,6 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index f66d16ba8c58..b45190556c0c 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -31,8 +31,6 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=m
 CONFIG_SCSI=m
 CONFIG_BLK_DEV_SD=m
 CONFIG_CHR_DEV_ST=m
diff --git a/arch/powerpc/configs/86xx-hw.config b/arch/powerpc/configs/86xx-hw.config
new file mode 100644
index 000000000000..f91f8895fc93
--- /dev/null
+++ b/arch/powerpc/configs/86xx-hw.config
@@ -0,0 +1,104 @@
+CONFIG_ATA=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BROADCOM_PHY=y
+# CONFIG_CARDBUS is not set
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_DS1682=y
+CONFIG_EEPROM_LEGACY=y
+CONFIG_GEF_WDT=y
+CONFIG_GIANFAR=y
+CONFIG_GPIO_GE_FPGA=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_1000=y
+CONFIG_I2C_MPC=y
+CONFIG_I2C=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_TULIP=y
+CONFIG_NVRAM=y
+CONFIG_PATA_ALI=y
+CONFIG_PCCARD=y
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_RX8581=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_SIL=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_LM92=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SND_INTEL8X0=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND=y
+CONFIG_SOUND=y
+CONFIG_ULI526X=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB=y
+CONFIG_VITESSE_PHY=y
+CONFIG_VME_BUS=y
+CONFIG_VME_TSI148=y
+CONFIG_WATCHDOG=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TOSHIBA is not set
+CONFIG_YENTA=y
diff --git a/arch/powerpc/configs/86xx-smp.config b/arch/powerpc/configs/86xx-smp.config
new file mode 100644
index 000000000000..40ac38d3038c
--- /dev/null
+++ b/arch/powerpc/configs/86xx-smp.config
@@ -0,0 +1,2 @@
+CONFIG_NR_CPUS=2
+CONFIG_SMP=y
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
deleted file mode 100644
index 9792a2cb9b20..000000000000
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ /dev/null
@@ -1,216 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_GEF_PPC9A=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_CARDBUS is not set
-CONFIG_YENTA=y
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_DS1682=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GE_FPGA=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_LM92=y
-CONFIG_WATCHDOG=y
-CONFIG_GEF_WDT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_STAGING=y
-CONFIG_VME_BUS=y
-CONFIG_VME_TSI148=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
deleted file mode 100644
index cadc36682bb4..000000000000
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ /dev/null
@@ -1,214 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_GEF_SBC310=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCCARD=y
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_CARDBUS is not set
-CONFIG_YENTA=y
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TOSHIBA is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_DS1682=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECS=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL24=y
-# CONFIG_ATA_SFF is not set
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GE_FPGA=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_LM92=y
-CONFIG_WATCHDOG=y
-CONFIG_GEF_WDT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_LIBCRC32C=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
deleted file mode 100644
index 2aa7d9737e43..000000000000
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ /dev/null
@@ -1,273 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_GEF_SBC610=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_DS1682=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_ATA=y
-CONFIG_SATA_SIL=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOATM=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_GE_FPGA=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SENSORS_LM92=y
-CONFIG_WATCHDOG=y
-CONFIG_GEF_WDT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_STAGING=y
-CONFIG_VME_BUS=y
-CONFIG_VME_TSI148=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
deleted file mode 100644
index e32207de2b77..000000000000
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ /dev/null
@@ -1,110 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_ELF_CORE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_MPC8610_HPCD=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-# CONFIG_SECCOMP is not set
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_IDE=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_PATA_ALI=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_NET_TULIP=y
-CONFIG_ULI526X=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_MPC=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_FSL_DIU=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_POWERPC_SOC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_SHIRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
deleted file mode 100644
index a36e11ddaebd..000000000000
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ /dev/null
@@ -1,156 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_MPC8641_HPCN=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_PATA_ALI=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_GIANFAR=y
-CONFIG_VITESSE_PHY=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_MPC=y
-# CONFIG_HWMON is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_INTEL8X0=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_CRC_T10DIF=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
deleted file mode 100644
index db79bdee844b..000000000000
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ /dev/null
@@ -1,246 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_SBC8641D=y
-CONFIG_PREEMPT=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEASPM is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP_SCTP=m
-CONFIG_TIPC=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_LE_BYTE_SWAP=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_MULTIPATH=y
-CONFIG_MD_FAULTY=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=y
-CONFIG_TUN=m
-CONFIG_GIANFAR=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOATM=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 91862292cd55..340685caa7b8 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -387,7 +387,6 @@ CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_BOOTX_TEXT=y
 CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_SELINUX=y
diff --git a/arch/powerpc/configs/mpc85xx_basic_defconfig b/arch/powerpc/configs/mpc85xx_basic_defconfig
index 850bd195d0e8..b1593fe6f70b 100644
--- a/arch/powerpc/configs/mpc85xx_basic_defconfig
+++ b/arch/powerpc/configs/mpc85xx_basic_defconfig
@@ -12,6 +12,7 @@ CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
 CONFIG_P1023_RDB=y
+CONFIG_TWR_P102x=y
 CONFIG_SBC8548=y
 CONFIG_SOCRATES=y
 CONFIG_STX_GP3=y
diff --git a/arch/powerpc/configs/mpc86xx_basic_defconfig b/arch/powerpc/configs/mpc86xx_basic_defconfig
new file mode 100644
index 000000000000..33af5c5de105
--- /dev/null
+++ b/arch/powerpc/configs/mpc86xx_basic_defconfig
@@ -0,0 +1,10 @@
+CONFIG_HIGHMEM=y
+CONFIG_KEXEC=y
+CONFIG_PPC_86xx=y
+CONFIG_PROC_KCORE=y
+CONFIG_GEF_PPC9A=y
+CONFIG_GEF_SBC310=y
+CONFIG_GEF_SBC610=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
deleted file mode 100644
index a4572563681c..000000000000
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ /dev/null
@@ -1,162 +0,0 @@
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_86xx=y
-CONFIG_MPC8641_HPCN=y
-CONFIG_SBC8641D=y
-CONFIG_MPC8610_HPCD=y
-CONFIG_GEF_SBC610=y
-CONFIG_HIGHMEM=y
-CONFIG_HZ_1000=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_PATA_ALI=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_GIANFAR=y
-CONFIG_VITESSE_PHY=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_MPC=y
-# CONFIG_HWMON is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_INTEL8X0=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_T10DIF=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
new file mode 100644
index 000000000000..045031048f8d
--- /dev/null
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -0,0 +1,313 @@
+CONFIG_PPC64=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2048
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OPAL_PRD=y
+# CONFIG_PPC_PSERIES is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
+CONFIG_HZ_100=y
+CONFIG_BINFMT_MISC=m
+CONFIG_PPC_TRANSACTIONAL_MEM=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_KEXEC=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_NUMA=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_PPC_64K_PAGES=y
+CONFIG_PPC_SUBPAGE_PROT=y
+CONFIG_SCHED_SMT=y
+CONFIG_PM=y
+CONFIG_PCI_MSI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_POWERNV_FLASH=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_BLK_DEV_FD=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_VIRTIO_BLK=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_AMD74XX=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_SCSI_CXGB3_ISCSI=m
+CONFIG_SCSI_CXGB4_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_BE2ISCSI=m
+CONFIG_SCSI_MPT2SAS=m
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_QLA_FC=m
+CONFIG_SCSI_QLA_ISCSI=m
+CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_VIRTIO=m
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_ALUA=m
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+# CONFIG_ATA_SFF is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_UEVENT=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=y
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=m
+CONFIG_VHOST_NET=m
+CONFIG_VORTEX=y
+CONFIG_ACENIC=m
+CONFIG_ACENIC_OMIT_TIGON_I=y
+CONFIG_PCNET32=y
+CONFIG_TIGON3=y
+CONFIG_BNX2X=m
+CONFIG_CHELSIO_T1=m
+CONFIG_BE2NET=m
+CONFIG_S2IO=m
+CONFIG_E100=y
+CONFIG_E1000=y
+CONFIG_E1000E=y
+CONFIG_IXGB=m
+CONFIG_IXGBE=m
+CONFIG_MLX4_EN=m
+CONFIG_MYRI10GE=m
+CONFIG_QLGE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_JSM=m
+CONFIG_VIRTIO_CONSOLE=m
+CONFIG_IPMI_HANDLER=y
+CONFIG_IPMI_DEVICE_INTERFACE=y
+CONFIG_IPMI_POWERNV=y
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=1024
+CONFIG_DRM=y
+CONFIG_DRM_AST=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_OF=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_IBM_GXT4500=y
+CONFIG_LCD_PLATFORM=m
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_LOGO=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_MON=m
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_POWERNV=m
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_CXGB3=m
+CONFIG_INFINIBAND_CXGB4=m
+CONFIG_MLX4_INFINIBAND=m
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_CM=y
+CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GENERIC=y
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_REISERFS_FS=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_NILFS2_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_OVERLAY_FS=m
+CONFIG_ISO9660_FS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_PSTORE=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_LATENCYTOP=y
+CONFIG_SCHED_TRACER=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
+CONFIG_XMON=y
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_DEV_NX=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 2c041b535a64..b041fb607376 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -36,7 +36,6 @@ CONFIG_PS3_ROM=m
 CONFIG_PS3_FLASH=m
 CONFIG_PS3_LPM=m
 CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_PPC_CELL_QPACE=y
 CONFIG_RTAS_FLASH=m
 CONFIG_IBMEBUS=y
 CONFIG_CPU_FREQ_PMAC64=y
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index e5d2c3dc07f1..99ccbebabfd3 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1175,7 +1175,6 @@ CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_XMON=y
 CONFIG_BOOTX_TEXT=y
 CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_NETWORK_XFRM=y
diff --git a/arch/powerpc/crypto/aes-spe-core.S b/arch/powerpc/crypto/aes-spe-core.S
index 5dc6bce90a77..bc6ff43a9889 100644
--- a/arch/powerpc/crypto/aes-spe-core.S
+++ b/arch/powerpc/crypto/aes-spe-core.S
@@ -61,7 +61,7 @@
  * via bl/blr. It expects that caller has pre-xored input data with first
  * 4 words of encryption key into rD0-rD3. Pointer/counter registers must
  * have also been set up before (rT0, rKP, CTR). Output is stored in rD0-rD3
- * and rW0-rW3 and caller must execute a final xor on the ouput registers.
+ * and rW0-rW3 and caller must execute a final xor on the output registers.
  * All working registers rD0-rD3 & rW0-rW7 are overwritten during processing.
  *
  */
@@ -209,7 +209,7 @@ ppc_encrypt_block_loop:
  * via bl/blr. It expects that caller has pre-xored input data with first
  * 4 words of encryption key into rD0-rD3. Pointer/counter registers must
  * have also been set up before (rT0, rKP, CTR). Output is stored in rD0-rD3
- * and rW0-rW3 and caller must execute a final xor on the ouput registers.
+ * and rW0-rW3 and caller must execute a final xor on the output registers.
  * All working registers rD0-rD3 & rW0-rW7 are overwritten during processing.
  *
  */
diff --git a/arch/powerpc/crypto/aes-spe-glue.c b/arch/powerpc/crypto/aes-spe-glue.c
index bd5e63f72ad4..748fc00c5e19 100644
--- a/arch/powerpc/crypto/aes-spe-glue.c
+++ b/arch/powerpc/crypto/aes-spe-glue.c
@@ -22,6 +22,7 @@
 #include <asm/byteorder.h>
 #include <asm/switch_to.h>
 #include <crypto/algapi.h>
+#include <crypto/xts.h>
 
 /*
  * MAX_BYTES defines the number of bytes that are allowed to be processed
@@ -32,7 +33,7 @@
  * 16 byte block block or 25 cycles per byte. Thus 768 bytes of input data
  * will need an estimated maximum of 20,000 cycles. Headroom for cache misses
  * included. Even with the low end model clocked at 667 MHz this equals to a
- * critical time window of less than 30us. The value has been choosen to
+ * critical time window of less than 30us. The value has been chosen to
  * process a 512 byte disk block in one or a large 1400 bytes IPsec network
  * packet in two runs.
  *
@@ -85,6 +86,7 @@ static void spe_begin(void)
 
 static void spe_end(void)
 {
+	disable_kernel_spe();
 	/* reenable preemption */
 	preempt_enable();
 }
@@ -125,6 +127,11 @@ static int ppc_xts_setkey(struct crypto_tfm *tfm, const u8 *in_key,
 		   unsigned int key_len)
 {
 	struct ppc_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+	int err;
+
+	err = xts_check_key(tfm, in_key, key_len);
+	if (err)
+		return err;
 
 	key_len >>= 1;
 
diff --git a/arch/powerpc/crypto/sha1-spe-glue.c b/arch/powerpc/crypto/sha1-spe-glue.c
index 3e1d22212521..f9ebc38d3fe7 100644
--- a/arch/powerpc/crypto/sha1-spe-glue.c
+++ b/arch/powerpc/crypto/sha1-spe-glue.c
@@ -46,6 +46,7 @@ static void spe_begin(void)
 
 static void spe_end(void)
 {
+	disable_kernel_spe();
 	/* reenable preemption */
 	preempt_enable();
 }
diff --git a/arch/powerpc/crypto/sha256-spe-glue.c b/arch/powerpc/crypto/sha256-spe-glue.c
index f4a616fe1a82..718a079dcdbf 100644
--- a/arch/powerpc/crypto/sha256-spe-glue.c
+++ b/arch/powerpc/crypto/sha256-spe-glue.c
@@ -47,6 +47,7 @@ static void spe_begin(void)
 
 static void spe_end(void)
 {
+	disable_kernel_spe();
 	/* reenable preemption */
 	preempt_enable();
 }
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index 55f106ed12bf..ae0751ef8788 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -12,6 +12,24 @@
 
 #define ATOMIC_INIT(i)		{ (i) }
 
+/*
+ * Since *_return_relaxed and {cmp}xchg_relaxed are implemented with
+ * a "bne-" instruction at the end, so an isync is enough as a acquire barrier
+ * on the platform without lwsync.
+ */
+#define __atomic_op_acquire(op, args...)				\
+({									\
+	typeof(op##_relaxed(args)) __ret  = op##_relaxed(args);		\
+	__asm__ __volatile__(PPC_ACQUIRE_BARRIER "" : : : "memory");	\
+	__ret;								\
+})
+
+#define __atomic_op_release(op, args...)				\
+({									\
+	__asm__ __volatile__(PPC_RELEASE_BARRIER "" : : : "memory");	\
+	op##_relaxed(args);						\
+})
+
 static __inline__ int atomic_read(const atomic_t *v)
 {
 	int t;
@@ -42,27 +60,27 @@ static __inline__ void atomic_##op(int a, atomic_t *v)			\
 	: "cc");							\
 }									\
 
-#define ATOMIC_OP_RETURN(op, asm_op)					\
-static __inline__ int atomic_##op##_return(int a, atomic_t *v)		\
+#define ATOMIC_OP_RETURN_RELAXED(op, asm_op)				\
+static inline int atomic_##op##_return_relaxed(int a, atomic_t *v)	\
 {									\
 	int t;								\
 									\
 	__asm__ __volatile__(						\
-	PPC_ATOMIC_ENTRY_BARRIER					\
-"1:	lwarx	%0,0,%2		# atomic_" #op "_return\n"		\
-	#asm_op " %0,%1,%0\n"						\
-	PPC405_ERR77(0,%2)						\
-"	stwcx.	%0,0,%2 \n"						\
+"1:	lwarx	%0,0,%3		# atomic_" #op "_return_relaxed\n"	\
+	#asm_op " %0,%2,%0\n"						\
+	PPC405_ERR77(0, %3)						\
+"	stwcx.	%0,0,%3\n"						\
 "	bne-	1b\n"							\
-	PPC_ATOMIC_EXIT_BARRIER						\
-	: "=&r" (t)							\
+	: "=&r" (t), "+m" (v->counter)					\
 	: "r" (a), "r" (&v->counter)					\
-	: "cc", "memory");						\
+	: "cc");							\
 									\
 	return t;							\
 }
 
-#define ATOMIC_OPS(op, asm_op) ATOMIC_OP(op, asm_op) ATOMIC_OP_RETURN(op, asm_op)
+#define ATOMIC_OPS(op, asm_op)						\
+	ATOMIC_OP(op, asm_op)						\
+	ATOMIC_OP_RETURN_RELAXED(op, asm_op)
 
 ATOMIC_OPS(add, add)
 ATOMIC_OPS(sub, subf)
@@ -71,8 +89,11 @@ ATOMIC_OP(and, and)
 ATOMIC_OP(or, or)
 ATOMIC_OP(xor, xor)
 
+#define atomic_add_return_relaxed atomic_add_return_relaxed
+#define atomic_sub_return_relaxed atomic_sub_return_relaxed
+
 #undef ATOMIC_OPS
-#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP_RETURN_RELAXED
 #undef ATOMIC_OP
 
 #define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
@@ -92,21 +113,19 @@ static __inline__ void atomic_inc(atomic_t *v)
 	: "cc", "xer");
 }
 
-static __inline__ int atomic_inc_return(atomic_t *v)
+static __inline__ int atomic_inc_return_relaxed(atomic_t *v)
 {
 	int t;
 
 	__asm__ __volatile__(
-	PPC_ATOMIC_ENTRY_BARRIER
-"1:	lwarx	%0,0,%1		# atomic_inc_return\n\
-	addic	%0,%0,1\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1 \n\
-	bne-	1b"
-	PPC_ATOMIC_EXIT_BARRIER
-	: "=&r" (t)
+"1:	lwarx	%0,0,%2		# atomic_inc_return_relaxed\n"
+"	addic	%0,%0,1\n"
+	PPC405_ERR77(0, %2)
+"	stwcx.	%0,0,%2\n"
+"	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
 	: "r" (&v->counter)
-	: "cc", "xer", "memory");
+	: "cc", "xer");
 
 	return t;
 }
@@ -136,27 +155,34 @@ static __inline__ void atomic_dec(atomic_t *v)
 	: "cc", "xer");
 }
 
-static __inline__ int atomic_dec_return(atomic_t *v)
+static __inline__ int atomic_dec_return_relaxed(atomic_t *v)
 {
 	int t;
 
 	__asm__ __volatile__(
-	PPC_ATOMIC_ENTRY_BARRIER
-"1:	lwarx	%0,0,%1		# atomic_dec_return\n\
-	addic	%0,%0,-1\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1\n\
-	bne-	1b"
-	PPC_ATOMIC_EXIT_BARRIER
-	: "=&r" (t)
+"1:	lwarx	%0,0,%2		# atomic_dec_return_relaxed\n"
+"	addic	%0,%0,-1\n"
+	PPC405_ERR77(0, %2)
+"	stwcx.	%0,0,%2\n"
+"	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
 	: "r" (&v->counter)
-	: "cc", "xer", "memory");
+	: "cc", "xer");
 
 	return t;
 }
 
+#define atomic_inc_return_relaxed atomic_inc_return_relaxed
+#define atomic_dec_return_relaxed atomic_dec_return_relaxed
+
 #define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_cmpxchg_relaxed(v, o, n) \
+	cmpxchg_relaxed(&((v)->counter), (o), (n))
+#define atomic_cmpxchg_acquire(v, o, n) \
+	cmpxchg_acquire(&((v)->counter), (o), (n))
+
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_xchg_relaxed(v, new) xchg_relaxed(&((v)->counter), (new))
 
 /**
  * __atomic_add_unless - add unless the number is a given value
@@ -285,26 +311,27 @@ static __inline__ void atomic64_##op(long a, atomic64_t *v)		\
 	: "cc");							\
 }
 
-#define ATOMIC64_OP_RETURN(op, asm_op)					\
-static __inline__ long atomic64_##op##_return(long a, atomic64_t *v)	\
+#define ATOMIC64_OP_RETURN_RELAXED(op, asm_op)				\
+static inline long							\
+atomic64_##op##_return_relaxed(long a, atomic64_t *v)			\
 {									\
 	long t;								\
 									\
 	__asm__ __volatile__(						\
-	PPC_ATOMIC_ENTRY_BARRIER					\
-"1:	ldarx	%0,0,%2		# atomic64_" #op "_return\n"		\
-	#asm_op " %0,%1,%0\n"						\
-"	stdcx.	%0,0,%2 \n"						\
+"1:	ldarx	%0,0,%3		# atomic64_" #op "_return_relaxed\n"	\
+	#asm_op " %0,%2,%0\n"						\
+"	stdcx.	%0,0,%3\n"						\
 "	bne-	1b\n"							\
-	PPC_ATOMIC_EXIT_BARRIER						\
-	: "=&r" (t)							\
+	: "=&r" (t), "+m" (v->counter)					\
 	: "r" (a), "r" (&v->counter)					\
-	: "cc", "memory");						\
+	: "cc");							\
 									\
 	return t;							\
 }
 
-#define ATOMIC64_OPS(op, asm_op) ATOMIC64_OP(op, asm_op) ATOMIC64_OP_RETURN(op, asm_op)
+#define ATOMIC64_OPS(op, asm_op)					\
+	ATOMIC64_OP(op, asm_op)						\
+	ATOMIC64_OP_RETURN_RELAXED(op, asm_op)
 
 ATOMIC64_OPS(add, add)
 ATOMIC64_OPS(sub, subf)
@@ -312,8 +339,11 @@ ATOMIC64_OP(and, and)
 ATOMIC64_OP(or, or)
 ATOMIC64_OP(xor, xor)
 
-#undef ATOMIC64_OPS
-#undef ATOMIC64_OP_RETURN
+#define atomic64_add_return_relaxed atomic64_add_return_relaxed
+#define atomic64_sub_return_relaxed atomic64_sub_return_relaxed
+
+#undef ATOPIC64_OPS
+#undef ATOMIC64_OP_RETURN_RELAXED
 #undef ATOMIC64_OP
 
 #define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
@@ -332,20 +362,18 @@ static __inline__ void atomic64_inc(atomic64_t *v)
 	: "cc", "xer");
 }
 
-static __inline__ long atomic64_inc_return(atomic64_t *v)
+static __inline__ long atomic64_inc_return_relaxed(atomic64_t *v)
 {
 	long t;
 
 	__asm__ __volatile__(
-	PPC_ATOMIC_ENTRY_BARRIER
-"1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
-	addic	%0,%0,1\n\
-	stdcx.	%0,0,%1 \n\
-	bne-	1b"
-	PPC_ATOMIC_EXIT_BARRIER
-	: "=&r" (t)
+"1:	ldarx	%0,0,%2		# atomic64_inc_return_relaxed\n"
+"	addic	%0,%0,1\n"
+"	stdcx.	%0,0,%2\n"
+"	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
 	: "r" (&v->counter)
-	: "cc", "xer", "memory");
+	: "cc", "xer");
 
 	return t;
 }
@@ -374,24 +402,25 @@ static __inline__ void atomic64_dec(atomic64_t *v)
 	: "cc", "xer");
 }
 
-static __inline__ long atomic64_dec_return(atomic64_t *v)
+static __inline__ long atomic64_dec_return_relaxed(atomic64_t *v)
 {
 	long t;
 
 	__asm__ __volatile__(
-	PPC_ATOMIC_ENTRY_BARRIER
-"1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
-	addic	%0,%0,-1\n\
-	stdcx.	%0,0,%1\n\
-	bne-	1b"
-	PPC_ATOMIC_EXIT_BARRIER
-	: "=&r" (t)
+"1:	ldarx	%0,0,%2		# atomic64_dec_return_relaxed\n"
+"	addic	%0,%0,-1\n"
+"	stdcx.	%0,0,%2\n"
+"	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
 	: "r" (&v->counter)
-	: "cc", "xer", "memory");
+	: "cc", "xer");
 
 	return t;
 }
 
+#define atomic64_inc_return_relaxed atomic64_inc_return_relaxed
+#define atomic64_dec_return_relaxed atomic64_dec_return_relaxed
+
 #define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
 #define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
 
@@ -420,7 +449,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
 }
 
 #define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_cmpxchg_relaxed(v, o, n) \
+	cmpxchg_relaxed(&((v)->counter), (o), (n))
+#define atomic64_cmpxchg_acquire(v, o, n) \
+	cmpxchg_acquire(&((v)->counter), (o), (n))
+
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic64_xchg_relaxed(v, new) xchg_relaxed(&((v)->counter), (new))
 
 /**
  * atomic64_add_unless - add unless the number is a given value
diff --git a/arch/powerpc/include/asm/barrier.h b/arch/powerpc/include/asm/barrier.h
index 0eca6efc0631..c0deafc212b8 100644
--- a/arch/powerpc/include/asm/barrier.h
+++ b/arch/powerpc/include/asm/barrier.h
@@ -34,8 +34,6 @@
 #define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
 #define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
 
-#define smp_store_mb(var, value)	do { WRITE_ONCE(var, value); mb(); } while (0)
-
 #ifdef __SUBARCH_HAS_LWSYNC
 #    define SMPWMB      LWSYNC
 #else
@@ -46,22 +44,11 @@
 #define dma_rmb()	__lwsync()
 #define dma_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
 
-#ifdef CONFIG_SMP
-#define smp_lwsync()	__lwsync()
-
-#define smp_mb()	mb()
-#define smp_rmb()	__lwsync()
-#define smp_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
-#else
-#define smp_lwsync()	barrier()
+#define __smp_lwsync()	__lwsync()
 
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#endif /* CONFIG_SMP */
-
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
+#define __smp_mb()	mb()
+#define __smp_rmb()	__lwsync()
+#define __smp_wmb()	__asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
 
 /*
  * This is a barrier which prevents following instructions from being
@@ -72,23 +59,23 @@
 #define data_barrier(x)	\
 	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
 
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)						\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
-	smp_lwsync();							\
+	__smp_lwsync();							\
 	WRITE_ONCE(*p, v);						\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
 	typeof(*p) ___p1 = READ_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
-	smp_lwsync();							\
+	__smp_lwsync();							\
 	___p1;								\
 })
 
-#define smp_mb__before_atomic()     smp_mb()
-#define smp_mb__after_atomic()      smp_mb()
 #define smp_mb__before_spinlock()   smp_mb()
 
+#include <asm-generic/barrier.h>
+
 #endif /* _ASM_POWERPC_BARRIER_H */
diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/book3s/32/hash.h
index 62cfb0c663bb..264b754d65b0 100644
--- a/arch/powerpc/include/asm/pte-hash32.h
+++ b/arch/powerpc/include/asm/book3s/32/hash.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_HASH32_H
-#define _ASM_POWERPC_PTE_HASH32_H
+#ifndef _ASM_POWERPC_BOOK3S_32_HASH_H
+#define _ASM_POWERPC_BOOK3S_32_HASH_H
 #ifdef __KERNEL__
 
 /*
@@ -43,4 +43,4 @@
 #define PTE_ATOMIC_UPDATES	1
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_HASH32_H */
+#endif /* _ASM_POWERPC_BOOK3S_32_HASH_H */
diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/book3s/32/mmu-hash.h
index 16f513e5cbd7..16f513e5cbd7 100644
--- a/arch/powerpc/include/asm/mmu-hash32.h
+++ b/arch/powerpc/include/asm/book3s/32/mmu-hash.h
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
new file mode 100644
index 000000000000..38b33dcfcc9d
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -0,0 +1,482 @@
+#ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H
+#define _ASM_POWERPC_BOOK3S_32_PGTABLE_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#include <asm/book3s/32/hash.h>
+
+/* And here we include common definitions */
+#include <asm/pte-common.h>
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table.  The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP	PKMAP_BASE
+#else
+#define KVIRT_TOP	(0xfe000000UL)	/* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP	((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP	KVIRT_TOP
+#endif
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 16MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START).  For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system.  This really does become a problem for machines with good amounts
+ * of RAM.  -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef PPC_PIN_SIZE
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END	ioremap_bot
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/io.h>			/* For sub-arch specific PPC_PIN_SIZE */
+
+extern unsigned long ioremap_bot;
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_SHIFT)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << (32 - PGDIR_SHIFT))
+
+#define pte_ERROR(e) \
+	pr_err("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
+		(unsigned long long)pte_val(e))
+#define pgd_ERROR(e) \
+	pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#define pte_clear(mm, addr, ptep) \
+	do { pte_update(ptep, ~_PAGE_HASHPTE, 0); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
+#define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
+
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+			    unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+			  unsigned long pmdval);
+
+/* Flush an entry from the TLB/hash table */
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+			     unsigned long address);
+
+/*
+ * PTE updates. This function is called whenever an existing
+ * valid PTE is updated. This does -not- include set_pte_at()
+ * which nowadays only sets a new PTE.
+ *
+ * Depending on the type of MMU, we may need to use atomic updates
+ * and the PTE may be either 32 or 64 bit wide. In the later case,
+ * when using atomic updates, only the low part of the PTE is
+ * accessed atomically.
+ *
+ * In addition, on 44x, we also maintain a global flag indicating
+ * that an executable user mapping was modified, which is needed
+ * to properly flush the virtually tagged instruction cache of
+ * those implementations.
+ */
+#ifndef CONFIG_PTE_64BIT
+static inline unsigned long pte_update(pte_t *p,
+				       unsigned long clr,
+				       unsigned long set)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%0,0,%3\n\
+	andc	%1,%0,%4\n\
+	or	%1,%1,%5\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+
+	return old;
+}
+#else /* CONFIG_PTE_64BIT */
+static inline unsigned long long pte_update(pte_t *p,
+					    unsigned long clr,
+					    unsigned long set)
+{
+	unsigned long long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%L0,0,%4\n\
+	lwzx	%0,0,%3\n\
+	andc	%1,%L0,%5\n\
+	or	%1,%1,%6\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%4\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+
+	return old;
+}
+#endif /* CONFIG_PTE_64BIT */
+
+/*
+ * 2.6 calls this without flushing the TLB entry; this is wrong
+ * for our hash-based implementation, we fix that up here.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+	old = pte_update(ptep, _PAGE_ACCESSED, 0);
+	if (old & _PAGE_HASHPTE) {
+		unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+		flush_hash_pages(context, addr, ptephys, 1);
+	}
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+	__ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), _PAGE_RO);
+}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+{
+	unsigned long set = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+	unsigned long clr = ~pte_val(entry) & _PAGE_RO;
+
+	pte_update(ptep, clr, set);
+}
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page.  The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler).  On everything else the pmd contains the physical address
+ * of the pte page.  -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+#else
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir))) + pte_index(addr))
+#define pte_unmap(pte)		kunmap_atomic(pte)
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit or the _PAGE_HASHPTE bit (if used).
+ *   -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x1f)
+#define __swp_offset(entry)		((entry).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
+
+#ifndef CONFIG_PPC_4K_PAGES
+void pgtable_cache_init(void);
+#else
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+#endif
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
+		      pmd_t **pmdp);
+
+/* Generic accessors to PTE bits */
+static inline int pte_write(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_RW);}
+static inline int pte_dirty(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_DIRTY); }
+static inline int pte_young(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_ACCESSED); }
+static inline int pte_special(pte_t pte)	{ return !!(pte_val(pte) & _PAGE_SPECIAL); }
+static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
+static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
+
+static inline int pte_present(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_PRESENT;
+}
+
+/* Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * Even if PTEs can be unsigned long long, a PFN is always an unsigned
+ * long for now.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
+		     pgprot_val(pgprot));
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return pte_val(pte) >> PTE_RPN_SHIFT;
+}
+
+/* Generic modifiers for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_RW);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_RW);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+
+
+/* This low level function performs the actual PTE insertion
+ * Setting the PTE depends on the MMU type and other factors. It's
+ * an horrible mess that I'm not going to try to clean up now but
+ * I'm keeping it in one place rather than spread around
+ */
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte, int percpu)
+{
+#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
+	/* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
+	 * helper pte_update() which does an atomic update. We need to do that
+	 * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
+	 * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
+	 * the hash bits instead (ie, same as the non-SMP case)
+	 */
+	if (percpu)
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+	else
+		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
+
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+	/* Second case is 32-bit with 64-bit PTE.  In this case, we
+	 * can just store as long as we do the two halves in the right order
+	 * with a barrier in between. This is possible because we take care,
+	 * in the hash code, to pre-invalidate if the PTE was already hashed,
+	 * which synchronizes us with any concurrent invalidation.
+	 * In the percpu case, we also fallback to the simple update preserving
+	 * the hash bits
+	 */
+	if (percpu) {
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+		return;
+	}
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(mm, ptep, addr);
+	__asm__ __volatile__("\
+		stw%U0%X0 %2,%0\n\
+		eieio\n\
+		stw%U0%X0 %L2,%1"
+	: "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
+	: "r" (pte) : "memory");
+
+#elif defined(CONFIG_PPC_STD_MMU_32)
+	/* Third case is 32-bit hash table in UP mode, we need to preserve
+	 * the _PAGE_HASHPTE bit since we may not have invalidated the previous
+	 * translation in the hash yet (done in a subsequent flush_tlb_xxx())
+	 * and see we need to keep track that this PTE needs invalidating
+	 */
+	*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+		      | (pte_val(pte) & ~_PAGE_HASHPTE));
+
+#else
+#error "Not supported "
+#endif
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU)
+
+#define pgprot_noncached pgprot_noncached
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE | _PAGE_GUARDED);
+}
+
+#define pgprot_noncached_wc pgprot_noncached_wc
+static inline pgprot_t pgprot_noncached_wc(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE);
+}
+
+#define pgprot_cached pgprot_cached
+static inline pgprot_t pgprot_cached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT);
+}
+
+#define pgprot_cached_wthru pgprot_cached_wthru
+static inline pgprot_t pgprot_cached_wthru(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT | _PAGE_WRITETHRU);
+}
+
+#define pgprot_cached_noncoherent pgprot_cached_noncoherent
+static inline pgprot_t pgprot_cached_noncoherent(pgprot_t prot)
+{
+	return __pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL);
+}
+
+#define pgprot_writecombine pgprot_writecombine
+static inline pgprot_t pgprot_writecombine(pgprot_t prot)
+{
+	return pgprot_noncached_wc(prot);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /*  _ASM_POWERPC_BOOK3S_32_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
new file mode 100644
index 000000000000..5f08a0832238
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_HASH_4K_H
+#define _ASM_POWERPC_BOOK3S_64_HASH_4K_H
+/*
+ * Entries per page directory level.  The PTE level must use a 64b record
+ * for each page table entry.  The PMD and PGD level use a 32b record for
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE  9
+#define PMD_INDEX_SIZE  7
+#define PUD_INDEX_SIZE  9
+#define PGD_INDEX_SIZE  9
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD	(1 << PUD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PMD_SHIFT
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT	(PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS		0
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
+			 _PAGE_F_SECOND | _PAGE_F_GIX)
+
+/* shift to put page number into pte */
+#define PTE_RPN_SHIFT	(12)
+#define PTE_RPN_SIZE	(45)	/* gives 57-bit real addresses */
+
+#define _PAGE_4K_PFN		0
+#ifndef __ASSEMBLY__
+/*
+ * On all 4K setups, remap_4k_pfn() equates to remap_pfn_range()
+ */
+#define remap_4k_pfn(vma, addr, pfn, prot)	\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * For 4k page size, we support explicit hugepage via hugepd
+ */
+static inline int pmd_huge(pmd_t pmd)
+{
+	return 0;
+}
+
+static inline int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
+static inline int pgd_huge(pgd_t pgd)
+{
+	return 0;
+}
+#define pgd_huge pgd_huge
+
+static inline int hugepd_ok(hugepd_t hpd)
+{
+	/*
+	 * if it is not a pte and have hugepd shift mask
+	 * set, then it is a hugepd directory pointer
+	 */
+	if (!(hpd.pd & _PAGE_PTE) &&
+	    ((hpd.pd & HUGEPD_SHIFT_MASK) != 0))
+		return true;
+	return false;
+}
+#define is_hugepd(hpd)		(hugepd_ok(hpd))
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_BOOK3S_64_HASH_4K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
new file mode 100644
index 000000000000..0a7956a80a08
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -0,0 +1,303 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_HASH_64K_H
+#define _ASM_POWERPC_BOOK3S_64_HASH_64K_H
+
+#define PTE_INDEX_SIZE  8
+#define PMD_INDEX_SIZE  5
+#define PUD_INDEX_SIZE	5
+#define PGD_INDEX_SIZE  12
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD	(1 << PUD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PAGE_SHIFT
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT	(PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define _PAGE_COMBO	0x00001000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN	0x00002000 /* PFN is for a single 4k page */
+/*
+ * Used to track subpage group valid if _PAGE_COMBO is set
+ * This overloads _PAGE_F_GIX and _PAGE_F_SECOND
+ */
+#define _PAGE_COMBO_VALID	(_PAGE_F_GIX | _PAGE_F_SECOND)
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_F_SECOND | \
+			 _PAGE_F_GIX | _PAGE_HASHPTE | _PAGE_COMBO)
+
+/* Shift to put page number into pte.
+ *
+ * That gives us a max RPN of 41 bits, which means a max of 57 bits
+ * of addressable physical space, or 53 bits for the special 4k PFNs.
+ */
+#define PTE_RPN_SHIFT	(16)
+#define PTE_RPN_SIZE	(41)
+
+/*
+ * we support 16 fragments per PTE page of 64K size.
+ */
+#define PTE_FRAG_NR	16
+/*
+ * We use a 2K PTE page fragment and another 2K for storing
+ * real_pte_t hash index
+ */
+#define PTE_FRAG_SIZE_SHIFT  12
+#define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT)
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0xc0000000000000ffUL
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0xc0000000000000ffUL
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS		0xc0000000000000ffUL
+
+#ifndef __ASSEMBLY__
+
+/*
+ * With 64K pages on hash table, we have a special PTE format that
+ * uses a second "half" of the page table to encode sub-page information
+ * in order to deal with 64K made of 4K HW pages. Thus we override the
+ * generic accessors and iterators here
+ */
+#define __real_pte __real_pte
+static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
+{
+	real_pte_t rpte;
+	unsigned long *hidxp;
+
+	rpte.pte = pte;
+	rpte.hidx = 0;
+	if (pte_val(pte) & _PAGE_COMBO) {
+		/*
+		 * Make sure we order the hidx load against the _PAGE_COMBO
+		 * check. The store side ordering is done in __hash_page_4K
+		 */
+		smp_rmb();
+		hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+		rpte.hidx = *hidxp;
+	}
+	return rpte;
+}
+
+static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
+{
+	if ((pte_val(rpte.pte) & _PAGE_COMBO))
+		return (rpte.hidx >> (index<<2)) & 0xf;
+	return (pte_val(rpte.pte) >> _PAGE_F_GIX_SHIFT) & 0xf;
+}
+
+#define __rpte_to_pte(r)	((r).pte)
+extern bool __rpte_sub_valid(real_pte_t rpte, unsigned long index);
+/*
+ * Trick: we set __end to va + 64k, which happens works for
+ * a 16M page as well as we want only one iteration
+ */
+#define pte_iterate_hashed_subpages(rpte, psize, vpn, index, shift)	\
+	do {								\
+		unsigned long __end = vpn + (1UL << (PAGE_SHIFT - VPN_SHIFT));	\
+		unsigned __split = (psize == MMU_PAGE_4K ||		\
+				    psize == MMU_PAGE_64K_AP);		\
+		shift = mmu_psize_defs[psize].shift;			\
+		for (index = 0; vpn < __end; index++,			\
+			     vpn += (1L << (shift - VPN_SHIFT))) {	\
+			if (!__split || __rpte_sub_valid(rpte, index))	\
+				do {
+
+#define pte_iterate_hashed_end() } while(0); } } while(0)
+
+#define pte_pagesize_index(mm, addr, pte)	\
+	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
+
+#define remap_4k_pfn(vma, addr, pfn, prot)				\
+	(WARN_ON(((pfn) >= (1UL << PTE_RPN_SIZE))) ? -EINVAL :	\
+		remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,	\
+			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)))
+
+#define PTE_TABLE_SIZE	PTE_FRAG_SIZE
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define PMD_TABLE_SIZE	((sizeof(pmd_t) << PMD_INDEX_SIZE) + (sizeof(unsigned long) << PMD_INDEX_SIZE))
+#else
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#endif
+#define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * We have PGD_INDEX_SIZ = 12 and PTE_INDEX_SIZE = 8, so that we can have
+ * 16GB hugepage pte in PGD and 16MB hugepage pte at PMD;
+ *
+ * Defined in such a way that we can optimize away code block at build time
+ * if CONFIG_HUGETLB_PAGE=n.
+ */
+static inline int pmd_huge(pmd_t pmd)
+{
+	/*
+	 * leaf pte for huge page
+	 */
+	return !!(pmd_val(pmd) & _PAGE_PTE);
+}
+
+static inline int pud_huge(pud_t pud)
+{
+	/*
+	 * leaf pte for huge page
+	 */
+	return !!(pud_val(pud) & _PAGE_PTE);
+}
+
+static inline int pgd_huge(pgd_t pgd)
+{
+	/*
+	 * leaf pte for huge page
+	 */
+	return !!(pgd_val(pgd) & _PAGE_PTE);
+}
+#define pgd_huge pgd_huge
+
+#ifdef CONFIG_DEBUG_VM
+extern int hugepd_ok(hugepd_t hpd);
+#define is_hugepd(hpd)               (hugepd_ok(hpd))
+#else
+/*
+ * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't
+ * need to setup hugepage directory for them. Our pte and page directory format
+ * enable us to have this enabled.
+ */
+static inline int hugepd_ok(hugepd_t hpd)
+{
+	return 0;
+}
+#define is_hugepd(pdep)			0
+#endif /* CONFIG_DEBUG_VM */
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern unsigned long pmd_hugepage_update(struct mm_struct *mm,
+					 unsigned long addr,
+					 pmd_t *pmdp,
+					 unsigned long clr,
+					 unsigned long set);
+static inline char *get_hpte_slot_array(pmd_t *pmdp)
+{
+	/*
+	 * The hpte hindex is stored in the pgtable whose address is in the
+	 * second half of the PMD
+	 *
+	 * Order this load with the test for pmd_trans_huge in the caller
+	 */
+	smp_rmb();
+	return *(char **)(pmdp + PTRS_PER_PMD);
+
+
+}
+/*
+ * The linux hugepage PMD now include the pmd entries followed by the address
+ * to the stashed pgtable_t. The stashed pgtable_t contains the hpte bits.
+ * [ 000 | 1 bit secondary | 3 bit hidx | 1 bit valid]. We use one byte per
+ * each HPTE entry. With 16MB hugepage and 64K HPTE we need 256 entries and
+ * with 4K HPTE we need 4096 entries. Both will fit in a 4K pgtable_t.
+ *
+ * The top three bits are intentionally left as zero. This memory location
+ * are also used as normal page PTE pointers. So if we have any pointers
+ * left around while we collapse a hugepage, we need to make sure
+ * _PAGE_PRESENT bit of that is zero when we look at them
+ */
+static inline unsigned int hpte_valid(unsigned char *hpte_slot_array, int index)
+{
+	return hpte_slot_array[index] & 0x1;
+}
+
+static inline unsigned int hpte_hash_index(unsigned char *hpte_slot_array,
+					   int index)
+{
+	return hpte_slot_array[index] >> 1;
+}
+
+static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array,
+					unsigned int index, unsigned int hidx)
+{
+	hpte_slot_array[index] = (hidx << 1) | 0x1;
+}
+
+/*
+ *
+ * For core kernel code by design pmd_trans_huge is never run on any hugetlbfs
+ * page. The hugetlbfs page table walking and mangling paths are totally
+ * separated form the core VM paths and they're differentiated by
+ *  VM_HUGETLB being set on vm_flags well before any pmd_trans_huge could run.
+ *
+ * pmd_trans_huge() is defined as false at build time if
+ * CONFIG_TRANSPARENT_HUGEPAGE=n to optimize away code blocks at build
+ * time in such case.
+ *
+ * For ppc64 we need to differntiate from explicit hugepages from THP, because
+ * for THP we also track the subpage details at the pmd level. We don't do
+ * that for explicit huge pages.
+ *
+ */
+static inline int pmd_trans_huge(pmd_t pmd)
+{
+	return !!((pmd_val(pmd) & (_PAGE_PTE | _PAGE_THP_HUGE)) ==
+		  (_PAGE_PTE | _PAGE_THP_HUGE));
+}
+
+static inline int pmd_large(pmd_t pmd)
+{
+	return !!(pmd_val(pmd) & _PAGE_PTE);
+}
+
+static inline pmd_t pmd_mknotpresent(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) & ~_PAGE_PRESENT);
+}
+
+#define __HAVE_ARCH_PMD_SAME
+static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
+{
+	return (((pmd_val(pmd_a) ^ pmd_val(pmd_b)) & ~_PAGE_HPTEFLAGS) == 0);
+}
+
+static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
+					      unsigned long addr, pmd_t *pmdp)
+{
+	unsigned long old;
+
+	if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0);
+	return ((old & _PAGE_ACCESSED) != 0);
+}
+
+#define __HAVE_ARCH_PMDP_SET_WRPROTECT
+static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pmd_t *pmdp)
+{
+
+	if ((pmd_val(*pmdp) & _PAGE_RW) == 0)
+		return;
+
+	pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0);
+}
+
+#endif /*  CONFIG_TRANSPARENT_HUGEPAGE */
+#endif	/* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_BOOK3S_64_HASH_64K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
new file mode 100644
index 000000000000..d0ee6fcef823
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -0,0 +1,561 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_HASH_H
+#define _ASM_POWERPC_BOOK3S_64_HASH_H
+#ifdef __KERNEL__
+
+/*
+ * Common bits between 4K and 64K pages in a linux-style PTE.
+ * Additional bits may be defined in pgtable-hash64-*.h
+ *
+ * Note: We only support user read/write permissions. Supervisor always
+ * have full read/write to pages above PAGE_OFFSET (pages below that
+ * always use the user access permissions).
+ *
+ * We could create separate kernel read-only if we used the 3 PP bits
+ * combinations that newer processors provide but we currently don't.
+ */
+#define _PAGE_BIT_SWAP_TYPE	0
+
+#define _PAGE_EXEC		0x00001 /* execute permission */
+#define _PAGE_RW		0x00002 /* read & write access allowed */
+#define _PAGE_READ		0x00004	/* read access allowed */
+#define _PAGE_USER		0x00008 /* page may be accessed by userspace */
+#define _PAGE_GUARDED		0x00010 /* G: guarded (side-effect) page */
+/* M (memory coherence) is always set in the HPTE, so we don't need it here */
+#define _PAGE_COHERENT		0x0
+#define _PAGE_NO_CACHE		0x00020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU		0x00040 /* W: cache write-through */
+#define _PAGE_DIRTY		0x00080 /* C: page changed */
+#define _PAGE_ACCESSED		0x00100 /* R: page referenced */
+#define _PAGE_SPECIAL		0x00400 /* software: special page */
+#define _PAGE_BUSY		0x00800 /* software: PTE & hash are busy */
+
+#ifdef CONFIG_MEM_SOFT_DIRTY
+#define _PAGE_SOFT_DIRTY	0x200 /* software: software dirty tracking */
+#else
+#define _PAGE_SOFT_DIRTY	0x000
+#endif
+
+#define _PAGE_F_GIX_SHIFT	57
+#define _PAGE_F_GIX		(7ul << 57)	/* HPTE index within HPTEG */
+#define _PAGE_F_SECOND		(1ul << 60)	/* HPTE is in 2ndary HPTEG */
+#define _PAGE_HASHPTE		(1ul << 61)	/* PTE has associated HPTE */
+#define _PAGE_PTE		(1ul << 62)	/* distinguishes PTEs from pointers */
+#define _PAGE_PRESENT		(1ul << 63)	/* pte contains a translation */
+
+/*
+ * We need to differentiate between explicit huge page and THP huge
+ * page, since THP huge page also need to track real subpage details
+ */
+#define _PAGE_THP_HUGE  _PAGE_4K_PFN
+
+/*
+ * set of bits not changed in pmd_modify.
+ */
+#define _HPAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+			 _PAGE_ACCESSED | _PAGE_THP_HUGE | _PAGE_PTE | \
+			 _PAGE_SOFT_DIRTY)
+
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/book3s/64/hash-64k.h>
+#else
+#include <asm/book3s/64/hash-4k.h>
+#endif
+
+/*
+ * Size of EA range mapped by our pagetables.
+ */
+#define PGTABLE_EADDR_SIZE	(PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
+				 PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+#define PGTABLE_RANGE		(ASM_CONST(1) << PGTABLE_EADDR_SIZE)
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define PMD_CACHE_INDEX	(PMD_INDEX_SIZE + 1)
+#else
+#define PMD_CACHE_INDEX	PMD_INDEX_SIZE
+#endif
+/*
+ * Define the address range of the kernel non-linear virtual area
+ */
+#define KERN_VIRT_START ASM_CONST(0xD000000000000000)
+#define KERN_VIRT_SIZE	ASM_CONST(0x0000100000000000)
+
+/*
+ * The vmalloc space starts at the beginning of that region, and
+ * occupies half of it on hash CPUs and a quarter of it on Book3E
+ * (we keep a quarter for the virtual memmap)
+ */
+#define VMALLOC_START	KERN_VIRT_START
+#define VMALLOC_SIZE	(KERN_VIRT_SIZE >> 1)
+#define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
+
+/*
+ * Region IDs
+ */
+#define REGION_SHIFT		60UL
+#define REGION_MASK		(0xfUL << REGION_SHIFT)
+#define REGION_ID(ea)		(((unsigned long)(ea)) >> REGION_SHIFT)
+
+#define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
+#define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
+#define VMEMMAP_REGION_ID	(0xfUL)	/* Server only */
+#define USER_REGION_ID		(0UL)
+
+/*
+ * Defines the address of the vmemap area, in its own region on
+ * hash table CPUs.
+ */
+#define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+
+#ifdef CONFIG_PPC_MM_SLICES
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+#endif /* CONFIG_PPC_MM_SLICES */
+
+/* No separate kernel read-only */
+#define _PAGE_KERNEL_RW		(_PAGE_RW | _PAGE_DIRTY) /* user access blocked by key */
+#define _PAGE_KERNEL_RO		 _PAGE_KERNEL_RW
+#define _PAGE_KERNEL_RWX	(_PAGE_DIRTY | _PAGE_RW | _PAGE_EXEC)
+
+/* Strong Access Ordering */
+#define _PAGE_SAO		(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
+/* No page size encoding in the linux PTE */
+#define _PAGE_PSIZE		0
+
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY	0x8
+#define _PTEIDX_GROUP_IX	0x7
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES	1
+#define _PTE_NONE_MASK	_PAGE_HPTEFLAGS
+/*
+ * The mask convered by the RPN must be a ULL on 32-bit platforms with
+ * 64-bit PTEs
+ */
+#define PTE_RPN_MASK	(((1UL << PTE_RPN_SIZE) - 1) << PTE_RPN_SHIFT)
+/*
+ * _PAGE_CHG_MASK masks of bits that are to be preserved across
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+			 _PAGE_ACCESSED | _PAGE_SPECIAL | _PAGE_PTE | \
+			 _PAGE_SOFT_DIRTY)
+/*
+ * Mask of bits returned by pte_pgprot()
+ */
+#define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU | _PAGE_4K_PFN | \
+			 _PAGE_USER | _PAGE_ACCESSED |  \
+			 _PAGE_RW |  _PAGE_DIRTY | _PAGE_EXEC | \
+			 _PAGE_SOFT_DIRTY)
+/*
+ * We define 2 sets of base prot bits, one for basic pages (ie,
+ * cacheable kernel and user pages) and one for non cacheable
+ * pages. We always set _PAGE_COHERENT when SMP is enabled or
+ * the processor might need it for DMA coherency.
+ */
+#define _PAGE_BASE_NC	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_PSIZE)
+#define _PAGE_BASE	(_PAGE_BASE_NC | _PAGE_COHERENT)
+
+/* Permission masks used to generate the __P and __S table,
+ *
+ * Note:__pgprot is defined in arch/powerpc/include/asm/page.h
+ *
+ * Write permissions imply read permissions for now (we could make write-only
+ * pages on BookE but we don't bother for now). Execute permission control is
+ * possible on platforms that define _PAGE_EXEC
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | \
+				 _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER )
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER )
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_X
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY_X
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_X
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED_X
+#define __S111	PAGE_SHARED_X
+
+/* Permission masks used for kernel mappings */
+#define PAGE_KERNEL	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RW)
+#define PAGE_KERNEL_NC	__pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
+				 _PAGE_NO_CACHE)
+#define PAGE_KERNEL_NCG	__pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
+				 _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX)
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
+#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)
+
+/* Protection used for kernel text. We want the debuggers to be able to
+ * set breakpoints anywhere, so don't write protect the kernel text
+ * on platforms where such control is possible.
+ */
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+	defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE)
+#define PAGE_KERNEL_TEXT	PAGE_KERNEL_X
+#else
+#define PAGE_KERNEL_TEXT	PAGE_KERNEL_ROX
+#endif
+
+/* Make modules code happy. We don't set RO yet */
+#define PAGE_KERNEL_EXEC	PAGE_KERNEL_X
+#define PAGE_AGP		(PAGE_KERNEL_NC)
+
+#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
+#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
+
+#ifndef __ASSEMBLY__
+#define	pmd_bad(pmd)		(pmd_val(pmd) & PMD_BAD_BITS)
+#define pmd_page_vaddr(pmd)	__va(pmd_val(pmd) & ~PMD_MASKED_BITS)
+
+#define	pud_bad(pud)		(pud_val(pud) & PUD_BAD_BITS)
+#define pud_page_vaddr(pud)	__va(pud_val(pud) & ~PUD_MASKED_BITS)
+
+/* Pointers in the page table tree are physical addresses */
+#define __pgtable_ptr_val(ptr)	__pa(ptr)
+
+#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & (PTRS_PER_PGD - 1))
+#define pud_index(address) (((address) >> (PUD_SHIFT)) & (PTRS_PER_PUD - 1))
+#define pmd_index(address) (((address) >> (PMD_SHIFT)) & (PTRS_PER_PMD - 1))
+#define pte_index(address) (((address) >> (PAGE_SHIFT)) & (PTRS_PER_PTE - 1))
+
+extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, unsigned long pte, int huge);
+extern unsigned long htab_convert_pte_flags(unsigned long pteflags);
+/* Atomic PTE updates */
+static inline unsigned long pte_update(struct mm_struct *mm,
+				       unsigned long addr,
+				       pte_t *ptep, unsigned long clr,
+				       unsigned long set,
+				       int huge)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%3		# pte_update\n\
+	andi.	%1,%0,%6\n\
+	bne-	1b \n\
+	andc	%1,%0,%4 \n\
+	or	%1,%1,%7\n\
+	stdcx.	%1,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY), "r" (set)
+	: "cc" );
+	/* huge pages use the old page table lock */
+	if (!huge)
+		assert_pte_locked(mm, addr);
+
+	if (old & _PAGE_HASHPTE)
+		hpte_need_flush(mm, addr, ptep, old, huge);
+
+	return old;
+}
+
+static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
+					      unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0);
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __addr, __ptep)		   \
+({									   \
+	int __r;							   \
+	__r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
+	__r;								   \
+})
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 0, 0);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+
+	pte_update(mm, addr, ptep, _PAGE_RW, 0, 1);
+}
+
+/*
+ * We currently remove entries from the hashtable regardless of whether
+ * the entry was young or dirty. The generic routines only flush if the
+ * entry was young or dirty which is not good enough.
+ *
+ * We should be more intelligent about this but for the moment we override
+ * these functions and force a tlb flush unconditionally
+ */
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep)		\
+({									\
+	int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
+						  __ptep);		\
+	__young;							\
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long addr, pte_t *ptep)
+{
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0);
+	return __pte(old);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t * ptep)
+{
+	pte_update(mm, addr, ptep, ~0UL, 0, 0);
+}
+
+
+/* Set the dirty and/or accessed bits atomically in a linux PTE, this
+ * function doesn't need to flush the hash entry
+ */
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC |
+		 _PAGE_SOFT_DIRTY);
+
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%4\n\
+		andi.	%1,%0,%6\n\
+		bne-	1b \n\
+		or	%0,%3,%0\n\
+		stdcx.	%0,0,%4\n\
+		bne-	1b"
+	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
+	:"cc");
+}
+
+static inline int pgd_bad(pgd_t pgd)
+{
+	return (pgd_val(pgd) == 0);
+}
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+static inline unsigned long pgd_page_vaddr(pgd_t pgd)
+{
+	return (unsigned long)__va(pgd_val(pgd) & ~PGD_MASKED_BITS);
+}
+
+
+/* Generic accessors to PTE bits */
+static inline int pte_write(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_RW);}
+static inline int pte_dirty(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_DIRTY); }
+static inline int pte_young(pte_t pte)		{ return !!(pte_val(pte) & _PAGE_ACCESSED); }
+static inline int pte_special(pte_t pte)	{ return !!(pte_val(pte) & _PAGE_SPECIAL); }
+static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
+static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
+
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+static inline bool pte_soft_dirty(pte_t pte)
+{
+	return !!(pte_val(pte) & _PAGE_SOFT_DIRTY);
+}
+static inline pte_t pte_mksoft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_clear_soft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_SOFT_DIRTY);
+}
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
+#ifdef CONFIG_NUMA_BALANCING
+/*
+ * These work without NUMA balancing but the kernel does not care. See the
+ * comment in include/asm-generic/pgtable.h . On powerpc, this will only
+ * work for user pages and always return true for kernel pages.
+ */
+static inline int pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) &
+		(_PAGE_PRESENT | _PAGE_USER)) == _PAGE_PRESENT;
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
+static inline int pte_present(pte_t pte)
+{
+	return !!(pte_val(pte) & _PAGE_PRESENT);
+}
+
+/* Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * Even if PTEs can be unsigned long long, a PFN is always an unsigned
+ * long for now.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	return __pte((((pte_basic_t)(pfn) << PTE_RPN_SHIFT) & PTE_RPN_MASK) |
+		     pgprot_val(pgprot));
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	return (pte_val(pte) & PTE_RPN_MASK) >> PTE_RPN_SHIFT;
+}
+
+/* Generic modifiers for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_RW);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_RW);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+/* This low level function performs the actual PTE insertion
+ * Setting the PTE depends on the MMU type and other factors. It's
+ * an horrible mess that I'm not going to try to clean up now but
+ * I'm keeping it in one place rather than spread around
+ */
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte, int percpu)
+{
+	/*
+	 * Anything else just stores the PTE normally. That covers all 64-bit
+	 * cases, and 32-bit non-hash with 32-bit PTEs.
+	 */
+	*ptep = pte;
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU)
+
+#define pgprot_noncached pgprot_noncached
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE | _PAGE_GUARDED);
+}
+
+#define pgprot_noncached_wc pgprot_noncached_wc
+static inline pgprot_t pgprot_noncached_wc(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_NO_CACHE);
+}
+
+#define pgprot_cached pgprot_cached
+static inline pgprot_t pgprot_cached(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT);
+}
+
+#define pgprot_cached_wthru pgprot_cached_wthru
+static inline pgprot_t pgprot_cached_wthru(pgprot_t prot)
+{
+	return __pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) |
+			_PAGE_COHERENT | _PAGE_WRITETHRU);
+}
+
+#define pgprot_cached_noncoherent pgprot_cached_noncoherent
+static inline pgprot_t pgprot_cached_noncoherent(pgprot_t prot)
+{
+	return __pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL);
+}
+
+#define pgprot_writecombine pgprot_writecombine
+static inline pgprot_t pgprot_writecombine(pgprot_t prot)
+{
+	return pgprot_noncached_wc(prot);
+}
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
+				   pmd_t *pmdp, unsigned long old_pmd);
+#else
+static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
+					  unsigned long addr, pmd_t *pmdp,
+					  unsigned long old_pmd)
+{
+	WARN(1, "%s called with THP disabled\n", __func__);
+}
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_BOOK3S_64_HASH_H */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index ba3342bbdbda..0cea4807e26f 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -21,7 +21,7 @@
  * need for various slices related matters. Note that this isn't the
  * complete pgtable.h but only a portion of it.
  */
-#include <asm/pgtable-ppc64.h>
+#include <asm/book3s/64/pgtable.h>
 #include <asm/bug.h>
 #include <asm/processor.h>
 
@@ -114,6 +114,7 @@
 
 #define POWER7_TLB_SETS		128	/* # sets in POWER7 TLB */
 #define POWER8_TLB_SETS		512	/* # sets in POWER8 TLB */
+#define POWER9_TLB_SETS_HASH	256	/* # sets in POWER9 TLB Hash mode */
 
 #ifndef __ASSEMBLY__
 
@@ -607,6 +608,9 @@ static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
 	context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
 	return get_vsid(context, ea, ssize);
 }
+
+unsigned htab_shift_for_mem_size(unsigned long mem_size);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
new file mode 100644
index 000000000000..77d3ce05798e
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -0,0 +1,319 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_H_
+#define _ASM_POWERPC_BOOK3S_64_PGTABLE_H_
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the ppc64 hashed page table.
+ */
+
+#include <asm/book3s/64/hash.h>
+#include <asm/barrier.h>
+
+/*
+ * The second half of the kernel virtual space is used for IO mappings,
+ * it's itself carved into the PIO region (ISA and PHB IO space) and
+ * the ioremap space
+ *
+ *  ISA_IO_BASE = KERN_IO_START, 64K reserved area
+ *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
+ * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
+ */
+#define KERN_IO_START	(KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))
+#define FULL_IO_SIZE	0x80000000ul
+#define  ISA_IO_BASE	(KERN_IO_START)
+#define  ISA_IO_END	(KERN_IO_START + 0x10000ul)
+#define  PHB_IO_BASE	(ISA_IO_END)
+#define  PHB_IO_END	(KERN_IO_START + FULL_IO_SIZE)
+#define IOREMAP_BASE	(PHB_IO_END)
+#define IOREMAP_END	(KERN_VIRT_START + KERN_VIRT_SIZE)
+
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+/* Advertise special mapping type for AGP */
+#define HAVE_PAGE_AGP
+
+/* Advertise support for _PAGE_SPECIAL */
+#define __HAVE_ARCH_PTE_SPECIAL
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the default implementation of various PTE accessors, it's
+ * used in all cases except Book3S with 64K pages where we have a
+ * concept of sub-pages
+ */
+#ifndef __real_pte
+
+#define __real_pte(e,p)		((real_pte_t){(e)})
+#define __rpte_to_pte(r)	((r).pte)
+#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >>_PAGE_F_GIX_SHIFT)
+
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
+	do {							         \
+		index = 0;					         \
+		shift = mmu_psize_defs[psize].shift;		         \
+
+#define pte_iterate_hashed_end() } while(0)
+
+/*
+ * We expect this to be called only for user addresses or kernel virtual
+ * addresses other than the linear mapping.
+ */
+#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
+
+#endif /* __real_pte */
+
+static inline void pmd_set(pmd_t *pmdp, unsigned long val)
+{
+	*pmdp = __pmd(val);
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_present(pmd)	(!pmd_none(pmd))
+
+static inline void pud_set(pud_t *pudp, unsigned long val)
+{
+	*pudp = __pud(val);
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	*pudp = __pud(0);
+}
+
+#define pud_none(pud)		(!pud_val(pud))
+#define pud_present(pud)	(pud_val(pud) != 0)
+
+extern struct page *pud_page(pud_t pud);
+extern struct page *pmd_page(pmd_t pmd);
+static inline pte_t pud_pte(pud_t pud)
+{
+	return __pte(pud_val(pud));
+}
+
+static inline pud_t pte_pud(pte_t pte)
+{
+	return __pud(pte_val(pte));
+}
+#define pud_write(pud)		pte_write(pud_pte(pud))
+#define pgd_write(pgd)		pte_write(pgd_pte(pgd))
+static inline void pgd_set(pgd_t *pgdp, unsigned long val)
+{
+	*pgdp = __pgd(val);
+}
+
+static inline void pgd_clear(pgd_t *pgdp)
+{
+	*pgdp = __pgd(0);
+}
+
+#define pgd_none(pgd)		(!pgd_val(pgd))
+#define pgd_present(pgd)	(!pgd_none(pgd))
+
+static inline pte_t pgd_pte(pgd_t pgd)
+{
+	return __pte(pgd_val(pgd));
+}
+
+static inline pgd_t pte_pgd(pte_t pte)
+{
+	return __pgd(pte_val(pte));
+}
+
+extern struct page *pgd_page(pgd_t pgd);
+
+/*
+ * Find an entry in a page-table-directory.  We combine the address region
+ * (the high order N bits) and the pgd portion of the address.
+ */
+
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+#define pud_offset(pgdp, addr)	\
+	(((pud_t *) pgd_page_vaddr(*(pgdp))) + pud_index(addr))
+#define pmd_offset(pudp,addr) \
+	(((pmd_t *) pud_page_vaddr(*(pudp))) + pmd_index(addr))
+#define pte_offset_kernel(dir,addr) \
+	(((pte_t *) pmd_page_vaddr(*(dir))) + pte_index(addr))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while(0)
+
+/* to find an entry in a kernel page-table-directory */
+/* This now only contains the vmalloc pages */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define pte_ERROR(e) \
+	pr_err("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	pr_err("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pud_ERROR(e) \
+	pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+#define pgd_ERROR(e) \
+	pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/* Encode and de-code a swap entry */
+#define MAX_SWAPFILES_CHECK() do { \
+	BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS); \
+	/*							\
+	 * Don't have overlapping bits with _PAGE_HPTEFLAGS	\
+	 * We filter HPTEFLAGS on set_pte.			\
+	 */							\
+	BUILD_BUG_ON(_PAGE_HPTEFLAGS & (0x1f << _PAGE_BIT_SWAP_TYPE)); \
+	BUILD_BUG_ON(_PAGE_HPTEFLAGS & _PAGE_SWP_SOFT_DIRTY);	\
+	} while (0)
+/*
+ * on pte we don't need handle RADIX_TREE_EXCEPTIONAL_SHIFT;
+ */
+#define SWP_TYPE_BITS 5
+#define __swp_type(x)		(((x).val >> _PAGE_BIT_SWAP_TYPE) \
+				& ((1UL << SWP_TYPE_BITS) - 1))
+#define __swp_offset(x)		(((x).val & PTE_RPN_MASK) >> PTE_RPN_SHIFT)
+#define __swp_entry(type, offset)	((swp_entry_t) { \
+				((type) << _PAGE_BIT_SWAP_TYPE) \
+				| (((offset) << PTE_RPN_SHIFT) & PTE_RPN_MASK)})
+/*
+ * swp_entry_t must be independent of pte bits. We build a swp_entry_t from
+ * swap type and offset we get from swap and convert that to pte to find a
+ * matching pte in linux page table.
+ * Clear bits not found in swap entries here.
+ */
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val((pte)) & ~_PAGE_PTE })
+#define __swp_entry_to_pte(x)	__pte((x).val | _PAGE_PTE)
+
+#ifdef CONFIG_MEM_SOFT_DIRTY
+#define _PAGE_SWP_SOFT_DIRTY   (1UL << (SWP_TYPE_BITS + _PAGE_BIT_SWAP_TYPE))
+#else
+#define _PAGE_SWP_SOFT_DIRTY	0UL
+#endif /* CONFIG_MEM_SOFT_DIRTY */
+
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SWP_SOFT_DIRTY);
+}
+static inline bool pte_swp_soft_dirty(pte_t pte)
+{
+	return !!(pte_val(pte) & _PAGE_SWP_SOFT_DIRTY);
+}
+static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_SWP_SOFT_DIRTY);
+}
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
+void pgtable_cache_init(void);
+
+struct page *realmode_pfn_to_page(unsigned long pfn);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot);
+extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot);
+extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot);
+extern void set_pmd_at(struct mm_struct *mm, unsigned long addr,
+		       pmd_t *pmdp, pmd_t pmd);
+extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
+				 pmd_t *pmd);
+extern int has_transparent_hugepage(void);
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
+
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
+
+static inline pmd_t pte_pmd(pte_t pte)
+{
+	return __pmd(pte_val(pte));
+}
+
+static inline pte_t *pmdp_ptep(pmd_t *pmd)
+{
+	return (pte_t *)pmd;
+}
+
+#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
+#define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
+#define pmd_young(pmd)		pte_young(pmd_pte(pmd))
+#define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
+#define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
+#define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
+#define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
+#define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
+#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+
+#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY
+#define pmd_soft_dirty(pmd)    pte_soft_dirty(pmd_pte(pmd))
+#define pmd_mksoft_dirty(pmd)  pte_pmd(pte_mksoft_dirty(pmd_pte(pmd)))
+#define pmd_clear_soft_dirty(pmd) pte_pmd(pte_clear_soft_dirty(pmd_pte(pmd)))
+#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */
+
+#ifdef CONFIG_NUMA_BALANCING
+static inline int pmd_protnone(pmd_t pmd)
+{
+	return pte_protnone(pmd_pte(pmd));
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
+#define __HAVE_ARCH_PMD_WRITE
+#define pmd_write(pmd)		pte_write(pmd_pte(pmd))
+
+static inline pmd_t pmd_mkhuge(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) | (_PAGE_PTE | _PAGE_THP_HUGE));
+}
+
+#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+extern int pmdp_set_access_flags(struct vm_area_struct *vma,
+				 unsigned long address, pmd_t *pmdp,
+				 pmd_t entry, int dirty);
+
+#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
+extern int pmdp_test_and_clear_young(struct vm_area_struct *vma,
+				     unsigned long address, pmd_t *pmdp);
+#define __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
+extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
+				  unsigned long address, pmd_t *pmdp);
+
+#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
+extern pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
+				     unsigned long addr, pmd_t *pmdp);
+
+extern pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
+				 unsigned long address, pmd_t *pmdp);
+#define pmdp_collapse_flush pmdp_collapse_flush
+
+#define __HAVE_ARCH_PGTABLE_DEPOSIT
+extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
+				       pgtable_t pgtable);
+#define __HAVE_ARCH_PGTABLE_WITHDRAW
+extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
+
+#define __HAVE_ARCH_PMDP_INVALIDATE
+extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
+			    pmd_t *pmdp);
+
+#define __HAVE_ARCH_PMDP_HUGE_SPLIT_PREPARE
+extern void pmdp_huge_split_prepare(struct vm_area_struct *vma,
+				    unsigned long address, pmd_t *pmdp);
+
+#define pmd_move_must_withdraw pmd_move_must_withdraw
+struct spinlock;
+static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
+					 struct spinlock *old_pmd_ptl)
+{
+	/*
+	 * Archs like ppc64 use pgtable to store per pmd
+	 * specific information. So when we switch the pmd,
+	 * we should also withdraw and deposit the pgtable
+	 */
+	return true;
+}
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */
diff --git a/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
new file mode 100644
index 000000000000..1b753f96b374
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/tlbflush-hash.h
@@ -0,0 +1,94 @@
+#ifndef _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H
+#define _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H
+
+#define MMU_NO_CONTEXT		0
+
+/*
+ * TLB flushing for 64-bit hash-MMU CPUs
+ */
+
+#include <linux/percpu.h>
+#include <asm/page.h>
+
+#define PPC64_TLB_BATCH_NR 192
+
+struct ppc64_tlb_batch {
+	int			active;
+	unsigned long		index;
+	struct mm_struct	*mm;
+	real_pte_t		pte[PPC64_TLB_BATCH_NR];
+	unsigned long		vpn[PPC64_TLB_BATCH_NR];
+	unsigned int		psize;
+	int			ssize;
+};
+DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
+extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
+
+#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch);
+
+	batch->active = 1;
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch);
+
+	if (batch->index)
+		__flush_tlb_pending(batch);
+	batch->active = 0;
+}
+
+#define arch_flush_lazy_mmu_mode()      do {} while (0)
+
+
+extern void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize,
+			    int ssize, unsigned long flags);
+extern void flush_hash_range(unsigned long number, int local);
+extern void flush_hash_hugepage(unsigned long vsid, unsigned long addr,
+				pmd_t *pmdp, unsigned int psize, int ssize,
+				unsigned long flags);
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+}
+
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+					unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+}
+
+/* Private function for use by PCI IO mapping code */
+extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
+				     unsigned long end);
+extern void flush_tlb_pmd_range(struct mm_struct *mm, pmd_t *pmd,
+				unsigned long addr);
+#endif /*  _ASM_POWERPC_BOOK3S_64_TLBFLUSH_HASH_H */
diff --git a/arch/powerpc/include/asm/book3s/pgtable.h b/arch/powerpc/include/asm/book3s/pgtable.h
new file mode 100644
index 000000000000..8b0f4a29259a
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/pgtable.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_POWERPC_BOOK3S_PGTABLE_H
+#define _ASM_POWERPC_BOOK3S_PGTABLE_H
+
+#ifdef CONFIG_PPC64
+#include <asm/book3s/64/pgtable.h>
+#else
+#include <asm/book3s/32/pgtable.h>
+#endif
+
+#define FIRST_USER_ADDRESS	0UL
+#ifndef __ASSEMBLY__
+/* Insert a PTE, top-level function is out of line. It uses an inline
+ * low level function in the respective pgtable-* files
+ */
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+		       pte_t pte);
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+				 pte_t *ptep, pte_t entry, int dirty);
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 5f8229e24fe6..ffbafbf76b19 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -69,6 +69,25 @@ extern void _set_L3CR(unsigned long);
 #define _set_L3CR(val)	do { } while(0)
 #endif
 
+static inline void dcbz(void *addr)
+{
+	__asm__ __volatile__ ("dcbz 0, %0" : : "r"(addr) : "memory");
+}
+
+static inline void dcbi(void *addr)
+{
+	__asm__ __volatile__ ("dcbi 0, %0" : : "r"(addr) : "memory");
+}
+
+static inline void dcbf(void *addr)
+{
+	__asm__ __volatile__ ("dcbf 0, %0" : : "r"(addr) : "memory");
+}
+
+static inline void dcbst(void *addr)
+{
+	__asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory");
+}
 #endif /* !__ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_CACHE_H */
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index 6229e6b6037b..69fb16d7a811 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -30,8 +30,6 @@ extern void flush_dcache_page(struct page *page);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
-extern void __flush_disable_L1(void);
-
 extern void flush_icache_range(unsigned long, unsigned long);
 extern void flush_icache_user_range(struct vm_area_struct *vma,
 				    struct page *page, unsigned long addr,
@@ -47,12 +45,58 @@ static inline void __flush_dcache_icache_phys(unsigned long physaddr)
 }
 #endif
 
-extern void flush_dcache_range(unsigned long start, unsigned long stop);
 #ifdef CONFIG_PPC32
-extern void clean_dcache_range(unsigned long start, unsigned long stop);
-extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+/*
+ * Write any modified data cache blocks out to memory and invalidate them.
+ * Does not invalidate the corresponding instruction cache blocks.
+ */
+static inline void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+	void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+	unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+	unsigned long i;
+
+	for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+		dcbf(addr);
+	mb();	/* sync */
+}
+
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ */
+static inline void clean_dcache_range(unsigned long start, unsigned long stop)
+{
+	void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+	unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+	unsigned long i;
+
+	for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+		dcbst(addr);
+	mb();	/* sync */
+}
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ */
+static inline void invalidate_dcache_range(unsigned long start,
+					   unsigned long stop)
+{
+	void *addr = (void *)(start & ~(L1_CACHE_BYTES - 1));
+	unsigned long size = stop - (unsigned long)addr + (L1_CACHE_BYTES - 1);
+	unsigned long i;
+
+	for (i = 0; i < size >> L1_CACHE_SHIFT; i++, addr += L1_CACHE_BYTES)
+		dcbi(addr);
+	mb();	/* sync */
+}
+
 #endif /* CONFIG_PPC32 */
 #ifdef CONFIG_PPC64
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
 extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
 extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
 #endif
diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
index e8d9ef4755a4..ee655ed1ff1b 100644
--- a/arch/powerpc/include/asm/checksum.h
+++ b/arch/powerpc/include/asm/checksum.h
@@ -9,30 +9,9 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.  ihl is the number
- * of 32-bit words and is always >= 5.
- */
 #ifdef CONFIG_GENERIC_CSUM
 #include <asm-generic/checksum.h>
 #else
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
 /*
  * Computes the checksum of a memory block at src, length len,
  * and adds in "sum" (32-bit), while copying the block to dst.
@@ -47,21 +26,12 @@ extern __wsum csum_partial_copy_generic(const void *src, void *dst,
 					      int len, __wsum sum,
 					      int *src_err, int *dst_err);
 
-#ifdef __powerpc64__
 #define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
 extern __wsum csum_and_copy_from_user(const void __user *src, void *dst,
 				      int len, __wsum sum, int *err_ptr);
 #define HAVE_CSUM_COPY_USER
 extern __wsum csum_and_copy_to_user(const void *src, void __user *dst,
 				    int len, __wsum sum, int *err_ptr);
-#else
-/*
- * the same as csum_partial, but copies from src to dst while it
- * checksums.
- */
-#define csum_partial_copy_from_user(src, dst, len, sum, errp)   \
-        csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL)
-#endif
 
 #define csum_partial_copy_nocheck(src, dst, len, sum)   \
         csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
@@ -83,15 +53,6 @@ static inline __sum16 csum_fold(__wsum sum)
 	return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
 }
 
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
-	return csum_fold(csum_partial(buff, len, 0));
-}
-
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
                                      unsigned short len,
                                      unsigned short proto,
@@ -135,17 +96,117 @@ static inline __wsum csum_add(__wsum csum, __wsum addend)
 {
 #ifdef __powerpc64__
 	u64 res = (__force u64)csum;
+#endif
+	if (__builtin_constant_p(csum) && csum == 0)
+		return addend;
+	if (__builtin_constant_p(addend) && addend == 0)
+		return csum;
 
+#ifdef __powerpc64__
 	res += (__force u64)addend;
 	return (__force __wsum)((u32)res + (res >> 32));
 #else
 	asm("addc %0,%0,%1;"
 	    "addze %0,%0;"
-	    : "+r" (csum) : "r" (addend));
+	    : "+r" (csum) : "r" (addend) : "xer");
 	return csum;
 #endif
 }
 
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.  ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+static inline __wsum ip_fast_csum_nofold(const void *iph, unsigned int ihl)
+{
+	const u32 *ptr = (const u32 *)iph + 1;
+#ifdef __powerpc64__
+	unsigned int i;
+	u64 s = *(const u32 *)iph;
+
+	for (i = 0; i < ihl - 1; i++, ptr++)
+		s += *ptr;
+	s += (s >> 32);
+	return (__force __wsum)s;
+#else
+	__wsum sum, tmp;
+
+	asm("mtctr %3;"
+	    "addc %0,%4,%5;"
+	    "1: lwzu %1, 4(%2);"
+	    "adde %0,%0,%1;"
+	    "bdnz 1b;"
+	    "addze %0,%0;"
+	    : "=r" (sum), "=r" (tmp), "+b" (ptr)
+	    : "r" (ihl - 2), "r" (*(const u32 *)iph), "r" (*ptr)
+	    : "ctr", "xer", "memory");
+
+	return sum;
+#endif
+}
+
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	return csum_fold(ip_fast_csum_nofold(iph, ihl));
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum __csum_partial(const void *buff, int len, __wsum sum);
+
+static inline __wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+	if (__builtin_constant_p(len) && len <= 16 && (len & 1) == 0) {
+		if (len == 2)
+			sum = csum_add(sum, (__force __wsum)*(const u16 *)buff);
+		if (len >= 4)
+			sum = csum_add(sum, (__force __wsum)*(const u32 *)buff);
+		if (len == 6)
+			sum = csum_add(sum, (__force __wsum)
+					    *(const u16 *)(buff + 4));
+		if (len >= 8)
+			sum = csum_add(sum, (__force __wsum)
+					    *(const u32 *)(buff + 4));
+		if (len == 10)
+			sum = csum_add(sum, (__force __wsum)
+					    *(const u16 *)(buff + 8));
+		if (len >= 12)
+			sum = csum_add(sum, (__force __wsum)
+					    *(const u32 *)(buff + 8));
+		if (len == 14)
+			sum = csum_add(sum, (__force __wsum)
+					    *(const u16 *)(buff + 12));
+		if (len >= 16)
+			sum = csum_add(sum, (__force __wsum)
+					    *(const u32 *)(buff + 12));
+	} else if (__builtin_constant_p(len) && (len & 3) == 0) {
+		sum = csum_add(sum, ip_fast_csum_nofold(buff, len >> 2));
+	} else {
+		sum = __csum_partial(buff, len, sum);
+	}
+	return sum;
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
 #endif
 #endif /* __KERNEL__ */
 #endif
diff --git a/arch/powerpc/include/asm/cmpxchg.h b/arch/powerpc/include/asm/cmpxchg.h
index ad6263cffb0f..44efe739b6b9 100644
--- a/arch/powerpc/include/asm/cmpxchg.h
+++ b/arch/powerpc/include/asm/cmpxchg.h
@@ -5,25 +5,25 @@
 #include <linux/compiler.h>
 #include <asm/synch.h>
 #include <asm/asm-compat.h>
+#include <linux/bug.h>
 
 /*
  * Atomic exchange
  *
- * Changes the memory location '*ptr' to be val and returns
+ * Changes the memory location '*p' to be val and returns
  * the previous value stored there.
  */
+
 static __always_inline unsigned long
-__xchg_u32(volatile void *p, unsigned long val)
+__xchg_u32_local(volatile void *p, unsigned long val)
 {
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
 "1:	lwarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%3,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -31,42 +31,34 @@ __xchg_u32(volatile void *p, unsigned long val)
 	return prev;
 }
 
-/*
- * Atomic exchange
- *
- * Changes the memory location '*ptr' to be val and returns
- * the previous value stored there.
- */
 static __always_inline unsigned long
-__xchg_u32_local(volatile void *p, unsigned long val)
+__xchg_u32_relaxed(u32 *p, unsigned long val)
 {
 	unsigned long prev;
 
 	__asm__ __volatile__(
-"1:	lwarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stwcx.	%3,0,%2 \n\
-	bne-	1b"
-	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+"1:	lwarx	%0,0,%2\n"
+	PPC405_ERR77(0, %2)
+"	stwcx.	%3,0,%2\n"
+"	bne-	1b"
+	: "=&r" (prev), "+m" (*p)
 	: "r" (p), "r" (val)
-	: "cc", "memory");
+	: "cc");
 
 	return prev;
 }
 
 #ifdef CONFIG_PPC64
 static __always_inline unsigned long
-__xchg_u64(volatile void *p, unsigned long val)
+__xchg_u64_local(volatile void *p, unsigned long val)
 {
 	unsigned long prev;
 
 	__asm__ __volatile__(
-	PPC_RELEASE_BARRIER
 "1:	ldarx	%0,0,%2 \n"
 	PPC405_ERR77(0,%2)
 "	stdcx.	%3,0,%2 \n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
 	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
 	: "r" (p), "r" (val)
 	: "cc", "memory");
@@ -75,64 +67,52 @@ __xchg_u64(volatile void *p, unsigned long val)
 }
 
 static __always_inline unsigned long
-__xchg_u64_local(volatile void *p, unsigned long val)
+__xchg_u64_relaxed(u64 *p, unsigned long val)
 {
 	unsigned long prev;
 
 	__asm__ __volatile__(
-"1:	ldarx	%0,0,%2 \n"
-	PPC405_ERR77(0,%2)
-"	stdcx.	%3,0,%2 \n\
-	bne-	1b"
-	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+"1:	ldarx	%0,0,%2\n"
+	PPC405_ERR77(0, %2)
+"	stdcx.	%3,0,%2\n"
+"	bne-	1b"
+	: "=&r" (prev), "+m" (*p)
 	: "r" (p), "r" (val)
-	: "cc", "memory");
+	: "cc");
 
 	return prev;
 }
 #endif
 
-/*
- * This function doesn't exist, so you'll get a linker error
- * if something tries to do an invalid xchg().
- */
-extern void __xchg_called_with_bad_pointer(void);
-
 static __always_inline unsigned long
-__xchg(volatile void *ptr, unsigned long x, unsigned int size)
+__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
 {
 	switch (size) {
 	case 4:
-		return __xchg_u32(ptr, x);
+		return __xchg_u32_local(ptr, x);
 #ifdef CONFIG_PPC64
 	case 8:
-		return __xchg_u64(ptr, x);
+		return __xchg_u64_local(ptr, x);
 #endif
 	}
-	__xchg_called_with_bad_pointer();
+	BUILD_BUG_ON_MSG(1, "Unsupported size for __xchg");
 	return x;
 }
 
 static __always_inline unsigned long
-__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
+__xchg_relaxed(void *ptr, unsigned long x, unsigned int size)
 {
 	switch (size) {
 	case 4:
-		return __xchg_u32_local(ptr, x);
+		return __xchg_u32_relaxed(ptr, x);
 #ifdef CONFIG_PPC64
 	case 8:
-		return __xchg_u64_local(ptr, x);
+		return __xchg_u64_relaxed(ptr, x);
 #endif
 	}
-	__xchg_called_with_bad_pointer();
+	BUILD_BUG_ON_MSG(1, "Unsupported size for __xchg_local");
 	return x;
 }
-#define xchg(ptr,x)							     \
-  ({									     \
-     __typeof__(*(ptr)) _x_ = (x);					     \
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
-  })
-
 #define xchg_local(ptr,x)						     \
   ({									     \
      __typeof__(*(ptr)) _x_ = (x);					     \
@@ -140,6 +120,12 @@ __xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
      		(unsigned long)_x_, sizeof(*(ptr))); 			     \
   })
 
+#define xchg_relaxed(ptr, x)						\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg_relaxed((ptr),			\
+			(unsigned long)_x_, sizeof(*(ptr)));		\
+})
 /*
  * Compare and exchange - if *p == old, set it to new,
  * and return the old value of *p.
@@ -151,14 +137,14 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
 	unsigned int prev;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
 	cmpw	0,%0,%3\n\
 	bne-	2f\n"
 	PPC405_ERR77(0,%2)
 "	stwcx.	%4,0,%2\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)
@@ -190,6 +176,56 @@ __cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
 	return prev;
 }
 
+static __always_inline unsigned long
+__cmpxchg_u32_relaxed(u32 *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32_relaxed\n"
+"	cmpw	0,%0,%3\n"
+"	bne-	2f\n"
+	PPC405_ERR77(0, %2)
+"	stwcx.	%4,0,%2\n"
+"	bne-	1b\n"
+"2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc");
+
+	return prev;
+}
+
+/*
+ * cmpxchg family don't have order guarantee if cmp part fails, therefore we
+ * can avoid superfluous barriers if we use assembly code to implement
+ * cmpxchg() and cmpxchg_acquire(), however we don't do the similar for
+ * cmpxchg_release() because that will result in putting a barrier in the
+ * middle of a ll/sc loop, which is probably a bad idea. For example, this
+ * might cause the conditional store more likely to fail.
+ */
+static __always_inline unsigned long
+__cmpxchg_u32_acquire(u32 *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32_acquire\n"
+"	cmpw	0,%0,%3\n"
+"	bne-	2f\n"
+	PPC405_ERR77(0, %2)
+"	stwcx.	%4,0,%2\n"
+"	bne-	1b\n"
+	PPC_ACQUIRE_BARRIER
+	"\n"
+"2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
 #ifdef CONFIG_PPC64
 static __always_inline unsigned long
 __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
@@ -197,13 +233,13 @@ __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
 	unsigned long prev;
 
 	__asm__ __volatile__ (
-	PPC_RELEASE_BARRIER
+	PPC_ATOMIC_ENTRY_BARRIER
 "1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
 	cmpd	0,%0,%3\n\
 	bne-	2f\n\
 	stdcx.	%4,0,%2\n\
 	bne-	1b"
-	PPC_ACQUIRE_BARRIER
+	PPC_ATOMIC_EXIT_BARRIER
 	"\n\
 2:"
 	: "=&r" (prev), "+m" (*p)
@@ -233,11 +269,47 @@ __cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
 
 	return prev;
 }
-#endif
 
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
+static __always_inline unsigned long
+__cmpxchg_u64_relaxed(u64 *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64_relaxed\n"
+"	cmpd	0,%0,%3\n"
+"	bne-	2f\n"
+"	stdcx.	%4,0,%2\n"
+"	bne-	1b\n"
+"2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u64_acquire(u64 *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64_acquire\n"
+"	cmpd	0,%0,%3\n"
+"	bne-	2f\n"
+"	stdcx.	%4,0,%2\n"
+"	bne-	1b\n"
+	PPC_ACQUIRE_BARRIER
+	"\n"
+"2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
 
 static __always_inline unsigned long
 __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
@@ -251,7 +323,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
 		return __cmpxchg_u64(ptr, old, new);
 #endif
 	}
-	__cmpxchg_called_with_bad_pointer();
+	BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg");
 	return old;
 }
 
@@ -267,10 +339,41 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
 		return __cmpxchg_u64_local(ptr, old, new);
 #endif
 	}
-	__cmpxchg_called_with_bad_pointer();
+	BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_local");
+	return old;
+}
+
+static __always_inline unsigned long
+__cmpxchg_relaxed(void *ptr, unsigned long old, unsigned long new,
+		  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32_relaxed(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64_relaxed(ptr, old, new);
+#endif
+	}
+	BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_relaxed");
 	return old;
 }
 
+static __always_inline unsigned long
+__cmpxchg_acquire(void *ptr, unsigned long old, unsigned long new,
+		  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32_acquire(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64_acquire(ptr, old, new);
+#endif
+	}
+	BUILD_BUG_ON_MSG(1, "Unsupported size for __cmpxchg_acquire");
+	return old;
+}
 #define cmpxchg(ptr, o, n)						 \
   ({									 \
      __typeof__(*(ptr)) _o_ = (o);					 \
@@ -288,6 +391,23 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
 				    (unsigned long)_n_, sizeof(*(ptr))); \
   })
 
+#define cmpxchg_relaxed(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg_relaxed((ptr),			\
+			(unsigned long)_o_, (unsigned long)_n_,		\
+			sizeof(*(ptr)));				\
+})
+
+#define cmpxchg_acquire(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg_acquire((ptr),			\
+			(unsigned long)_o_, (unsigned long)_n_,		\
+			sizeof(*(ptr)));				\
+})
 #ifdef CONFIG_PPC64
 #define cmpxchg64(ptr, o, n)						\
   ({									\
@@ -299,7 +419,16 @@ __cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
 	cmpxchg_local((ptr), (o), (n));					\
   })
-#define cmpxchg64_relaxed	cmpxchg64_local
+#define cmpxchg64_relaxed(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_relaxed((ptr), (o), (n));				\
+})
+#define cmpxchg64_acquire(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_acquire((ptr), (o), (n));				\
+})
 #else
 #include <asm-generic/cmpxchg-local.h>
 #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
index 840a5509b3f1..994c60a857ce 100644
--- a/arch/powerpc/include/asm/code-patching.h
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -99,4 +99,25 @@ static inline unsigned long ppc_global_function_entry(void *func)
 #endif
 }
 
+#ifdef CONFIG_PPC64
+/*
+ * Some instruction encodings commonly used in dynamic ftracing
+ * and function live patching.
+ */
+
+/* This must match the definition of STK_GOT in <asm/ppc_asm.h> */
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define R2_STACK_OFFSET         24
+#else
+#define R2_STACK_OFFSET         40
+#endif
+
+#define PPC_INST_LD_TOC		(PPC_INST_LD  | ___PPC_RT(__REG_R2) | \
+				 ___PPC_RA(__REG_R1) | R2_STACK_OFFSET)
+
+/* usually preceded by a mflr r0 */
+#define PPC_INST_STD_LR		(PPC_INST_STD | ___PPC_RS(__REG_R0) | \
+				 ___PPC_RA(__REG_R1) | PPC_LR_STKOFF)
+#endif /* CONFIG_PPC64 */
+
 #endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 4398a6cdcf53..2c5c5b476804 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -5,6 +5,7 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/of.h>
+#include <soc/fsl/qe/qe.h>
 
 /*
  * SPI Parameter RAM common to QE and CPM.
@@ -155,49 +156,6 @@ typedef struct cpm_buf_desc {
  */
 #define BD_I2C_START		(0x0400)
 
-int cpm_muram_init(void);
-
-#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
-void __iomem *cpm_muram_addr(unsigned long offset);
-unsigned long cpm_muram_offset(void __iomem *addr);
-dma_addr_t cpm_muram_dma(void __iomem *addr);
-#else
-static inline unsigned long cpm_muram_alloc(unsigned long size,
-					    unsigned long align)
-{
-	return -ENOSYS;
-}
-
-static inline int cpm_muram_free(unsigned long offset)
-{
-	return -ENOSYS;
-}
-
-static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
-						  unsigned long size)
-{
-	return -ENOSYS;
-}
-
-static inline void __iomem *cpm_muram_addr(unsigned long offset)
-{
-	return NULL;
-}
-
-static inline unsigned long cpm_muram_offset(void __iomem *addr)
-{
-	return -ENOSYS;
-}
-
-static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
-{
-	return 0;
-}
-#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
-
 #ifdef CONFIG_CPM
 int cpm_command(u32 command, u8 opcode);
 #else
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index b118072670fb..df4fb5faba43 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -43,6 +43,11 @@ extern int machine_check_e500(struct pt_regs *regs);
 extern int machine_check_e200(struct pt_regs *regs);
 extern int machine_check_47x(struct pt_regs *regs);
 
+extern void cpu_down_flush_e500v2(void);
+extern void cpu_down_flush_e500mc(void);
+extern void cpu_down_flush_e5500(void);
+extern void cpu_down_flush_e6500(void);
+
 /* NOTE WELL: Update identify_cpu() if fields are added or removed! */
 struct cpu_spec {
 	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
@@ -59,6 +64,9 @@ struct cpu_spec {
 	unsigned int	icache_bsize;
 	unsigned int	dcache_bsize;
 
+	/* flush caches inside the current cpu */
+	void (*cpu_down_flush)(void);
+
 	/* number of performance monitor counters */
 	unsigned int	num_pmcs;
 	enum powerpc_pmc_type pmc_type;
@@ -171,7 +179,7 @@ enum {
 #define CPU_FTR_ARCH_201		LONG_ASM_CONST(0x0000000200000000)
 #define CPU_FTR_ARCH_206		LONG_ASM_CONST(0x0000000400000000)
 #define CPU_FTR_ARCH_207S		LONG_ASM_CONST(0x0000000800000000)
-/* Free					LONG_ASM_CONST(0x0000001000000000) */
+#define CPU_FTR_ARCH_300		LONG_ASM_CONST(0x0000001000000000)
 #define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000002000000000)
 #define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000004000000000)
 #define CPU_FTR_SMT			LONG_ASM_CONST(0x0000008000000000)
@@ -196,6 +204,7 @@ enum {
 #define CPU_FTR_DAWR			LONG_ASM_CONST(0x0400000000000000)
 #define CPU_FTR_DABRX			LONG_ASM_CONST(0x0800000000000000)
 #define CPU_FTR_PMAO_BUG		LONG_ASM_CONST(0x1000000000000000)
+#define CPU_FTR_SUBCORE			LONG_ASM_CONST(0x2000000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -443,9 +452,19 @@ enum {
 	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
 	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
-	    CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP)
+	    CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_SUBCORE)
 #define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG)
 #define CPU_FTRS_POWER8_DD1 (CPU_FTRS_POWER8 & ~CPU_FTR_DBELL)
+#define CPU_FTRS_POWER9 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR | CPU_FTR_SAO  | \
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
+	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
+	    CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_ARCH_300)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -464,7 +483,7 @@ enum {
 	    (CPU_FTRS_POWER4 | CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | \
 	     CPU_FTRS_POWER6 | CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | \
 	     CPU_FTRS_POWER8 | CPU_FTRS_POWER8_DD1 | CPU_FTRS_CELL | \
-	     CPU_FTRS_PA6T | CPU_FTR_VSX)
+	     CPU_FTRS_PA6T | CPU_FTR_VSX | CPU_FTRS_POWER9)
 #endif
 #else
 enum {
@@ -515,7 +534,8 @@ enum {
 	    (CPU_FTRS_POWER4 & CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & \
 	     CPU_FTRS_POWER6 & CPU_FTRS_POWER7 & CPU_FTRS_CELL & \
 	     CPU_FTRS_PA6T & CPU_FTRS_POWER8 & CPU_FTRS_POWER8E & \
-	     CPU_FTRS_POWER8_DD1 & ~CPU_FTR_HVMODE & CPU_FTRS_POSSIBLE)
+	     CPU_FTRS_POWER8_DD1 & ~CPU_FTR_HVMODE & CPU_FTRS_POSSIBLE & \
+	     CPU_FTRS_POWER9)
 #endif
 #else
 enum {
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index ba42e46ea58e..666bef4ebfae 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_POWERPC_CPUTHREADS_H
 #define _ASM_POWERPC_CPUTHREADS_H
 
+#ifndef __ASSEMBLY__
 #include <linux/cpumask.h>
 
 /*
@@ -94,7 +95,21 @@ static inline int cpu_last_thread_sibling(int cpu)
 	return cpu | (threads_per_core - 1);
 }
 
+static inline u32 get_tensr(void)
+{
+#ifdef	CONFIG_BOOKE
+	if (cpu_has_feature(CPU_FTR_SMT))
+		return mfspr(SPRN_TENSR);
+#endif
+	return 1;
+}
+
+void book3e_start_thread(int thread, unsigned long addr);
+void book3e_stop_thread(int thread);
+
+#endif /* __ASSEMBLY__ */
 
+#define INVALID_THREAD_HWID	0x0fff
 
 #endif /* _ASM_POWERPC_CPUTHREADS_H */
 
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 7f522c021dc3..77816acd4fd9 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -125,8 +125,6 @@ static inline void set_dma_offset(struct device *dev, dma_addr_t off)
 #define HAVE_ARCH_DMA_SET_MASK 1
 extern int dma_set_mask(struct device *dev, u64 dma_mask);
 
-#include <asm-generic/dma-mapping-common.h>
-
 extern int __dma_set_mask(struct device *dev, u64 dma_mask);
 extern u64 __dma_get_required_mask(struct device *dev);
 
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index c5eb86f3d452..fb9f376ae27b 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -72,6 +72,7 @@ struct pci_dn;
 #define EEH_PE_PHB	(1 << 1)	/* PHB PE    */
 #define EEH_PE_DEVICE 	(1 << 2)	/* Device PE */
 #define EEH_PE_BUS	(1 << 3)	/* Bus PE    */
+#define EEH_PE_VF	(1 << 4)	/* VF PE     */
 
 #define EEH_PE_ISOLATED		(1 << 0)	/* Isolated PE		*/
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
@@ -81,6 +82,7 @@ struct pci_dn;
 #define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
 #define EEH_PE_CFG_RESTRICTED	(1 << 9)	/* Block config on error */
 #define EEH_PE_REMOVED		(1 << 10)	/* Removed permanently	*/
+#define EEH_PE_PRI_BUS		(1 << 11)	/* Cached primary bus   */
 
 struct eeh_pe {
 	int type;			/* PE type: PHB/Bus/Device	*/
@@ -135,11 +137,15 @@ struct eeh_dev {
 	int pcix_cap;			/* Saved PCIx capability	*/
 	int pcie_cap;			/* Saved PCIe capability	*/
 	int aer_cap;			/* Saved AER capability		*/
+	int af_cap;			/* Saved AF capability		*/
 	struct eeh_pe *pe;		/* Associated PE		*/
 	struct list_head list;		/* Form link list in the PE	*/
+	struct list_head rmv_list;	/* Record the removed edevs	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
 	struct pci_dn *pdn;		/* Associated PCI device node	*/
 	struct pci_dev *pdev;		/* Associated PCI device	*/
+	bool in_error;			/* Error flag for edev		*/
+	struct pci_dev *physfn;		/* Associated SRIOV PF		*/
 	struct pci_bus *bus;		/* PCI bus for partial hotplug	*/
 };
 
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 77f52b26dad6..93ae809fe5ea 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -130,15 +130,6 @@ BEGIN_FTR_SECTION_NESTED(941)						\
 END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
 
 /*
- * Increase the priority on systems where PPR save/restore is not
- * implemented/ supported.
- */
-#define HMT_MEDIUM_PPR_DISCARD						\
-BEGIN_FTR_SECTION_NESTED(942)						\
-	HMT_MEDIUM;							\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,0,942)  /*non P7*/		
-
-/*
  * Get an SPR into a register if the CPU has the given feature
  */
 #define OPT_GET_SPR(ra, spr, ftr)					\
@@ -263,17 +254,6 @@ do_kvm_##n:								\
 #define KVM_HANDLER_SKIP(area, h, n)
 #endif
 
-#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
-#define KVMTEST_PR(n)			__KVMTEST(n)
-#define KVM_HANDLER_PR(area, h, n)	__KVM_HANDLER(area, h, n)
-#define KVM_HANDLER_PR_SKIP(area, h, n)	__KVM_HANDLER_SKIP(area, h, n)
-
-#else
-#define KVMTEST_PR(n)
-#define KVM_HANDLER_PR(area, h, n)
-#define KVM_HANDLER_PR_SKIP(area, h, n)
-#endif
-
 #define NOTEST(n)
 
 /*
@@ -353,27 +333,25 @@ do_kvm_##n:								\
 /*
  * Exception vectors.
  */
-#define STD_EXCEPTION_PSERIES(loc, vec, label)		\
-	. = loc;					\
+#define STD_EXCEPTION_PSERIES(vec, label)		\
+	. = vec;					\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	SET_SCRATCH0(r13);		/* save r13 */		\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common,	\
-				 EXC_STD, KVMTEST_PR, vec)
+				 EXC_STD, KVMTEST, vec)
 
 /* Version of above for when we have to branch out-of-line */
 #define STD_EXCEPTION_PSERIES_OOL(vec, label)			\
 	.globl label##_pSeries;					\
 label##_pSeries:						\
-	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_PR, vec);	\
+	EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST, vec);	\
 	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_STD)
 
 #define STD_EXCEPTION_HV(loc, vec, label)		\
 	. = loc;					\
 	.globl label##_hv;				\
 label##_hv:						\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	SET_SCRATCH0(r13);	/* save r13 */			\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common,	\
 				 EXC_HV, KVMTEST, vec)
@@ -389,7 +367,6 @@ label##_hv:						\
 	. = loc;					\
 	.globl label##_relon_pSeries;			\
 label##_relon_pSeries:					\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	/* No guest interrupts come through here */	\
 	SET_SCRATCH0(r13);		/* save r13 */	\
 	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
@@ -405,7 +382,6 @@ label##_relon_pSeries:						\
 	. = loc;					\
 	.globl label##_relon_hv;			\
 label##_relon_hv:					\
-	HMT_MEDIUM_PPR_DISCARD;				\
 	/* No guest interrupts come through here */	\
 	SET_SCRATCH0(r13);	/* save r13 */		\
 	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
@@ -436,17 +412,13 @@ label##_relon_hv:						\
 #define _SOFTEN_TEST(h, vec)	__SOFTEN_TEST(h, vec)
 
 #define SOFTEN_TEST_PR(vec)						\
-	KVMTEST_PR(vec);						\
+	KVMTEST(vec);							\
 	_SOFTEN_TEST(EXC_STD, vec)
 
 #define SOFTEN_TEST_HV(vec)						\
 	KVMTEST(vec);							\
 	_SOFTEN_TEST(EXC_HV, vec)
 
-#define SOFTEN_TEST_HV_201(vec)						\
-	KVMTEST(vec);							\
-	_SOFTEN_TEST(EXC_STD, vec)
-
 #define SOFTEN_NOTEST_PR(vec)		_SOFTEN_TEST(EXC_STD, vec)
 #define SOFTEN_NOTEST_HV(vec)		_SOFTEN_TEST(EXC_HV, vec)
 
@@ -463,7 +435,6 @@ label##_relon_hv:						\
 	. = loc;							\
 	.globl label##_pSeries;						\
 label##_pSeries:							\
-	HMT_MEDIUM_PPR_DISCARD;						\
 	_MASKABLE_EXCEPTION_PSERIES(vec, label,				\
 				    EXC_STD, SOFTEN_TEST_PR)
 
@@ -481,7 +452,6 @@ label##_hv:								\
 	EXCEPTION_PROLOG_PSERIES_1(label##_common, EXC_HV);
 
 #define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)	\
-	HMT_MEDIUM_PPR_DISCARD;						\
 	SET_SCRATCH0(r13);    /* save r13 */				\
 	EXCEPTION_PROLOG_0(PACA_EXGEN);					\
 	__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec);		\
diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
index 493e72f64b35..b4407d0add27 100644
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -191,7 +191,7 @@ struct fadump_crash_info_header {
 	u64		elfcorehdr_addr;
 	u32		crashing_cpu;
 	struct pt_regs	regs;
-	struct cpumask	cpu_online_mask;
+	struct cpumask	online_mask;
 };
 
 /* Crash memory ranges */
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index e05808a328db..b0629249778b 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -47,12 +47,10 @@
 #define FW_FEATURE_VPHN		ASM_CONST(0x0000000004000000)
 #define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
 #define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
-#define FW_FEATURE_OPALv2	ASM_CONST(0x0000000020000000)
 #define FW_FEATURE_SET_MODE	ASM_CONST(0x0000000040000000)
 #define FW_FEATURE_BEST_ENERGY	ASM_CONST(0x0000000080000000)
 #define FW_FEATURE_TYPE1_AFFINITY ASM_CONST(0x0000000100000000)
 #define FW_FEATURE_PRRN		ASM_CONST(0x0000000200000000)
-#define FW_FEATURE_OPALv3	ASM_CONST(0x0000000400000000)
 
 #ifndef __ASSEMBLY__
 
@@ -70,8 +68,7 @@ enum {
 		FW_FEATURE_SET_MODE | FW_FEATURE_BEST_ENERGY |
 		FW_FEATURE_TYPE1_AFFINITY | FW_FEATURE_PRRN,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
-	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2 |
-		FW_FEATURE_OPALv3,
+	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL,
 	FW_FEATURE_POWERNV_ALWAYS = 0,
 	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
 	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
diff --git a/arch/powerpc/include/asm/fsl_pm.h b/arch/powerpc/include/asm/fsl_pm.h
new file mode 100644
index 000000000000..47df55e36d4f
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_pm.h
@@ -0,0 +1,51 @@
+/*
+ * Support Power Management
+ *
+ * Copyright 2014-2015 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __PPC_FSL_PM_H
+#define __PPC_FSL_PM_H
+
+#define E500_PM_PH10	1
+#define E500_PM_PH15	2
+#define E500_PM_PH20	3
+#define E500_PM_PH30	4
+#define E500_PM_DOZE	E500_PM_PH10
+#define E500_PM_NAP	E500_PM_PH15
+
+#define PLAT_PM_SLEEP	20
+#define PLAT_PM_LPM20	30
+
+#define FSL_PM_SLEEP		(1 << 0)
+#define FSL_PM_DEEP_SLEEP	(1 << 1)
+
+struct fsl_pm_ops {
+	/* mask pending interrupts to the RCPM from MPIC */
+	void (*irq_mask)(int cpu);
+
+	/* unmask pending interrupts to the RCPM from MPIC */
+	void (*irq_unmask)(int cpu);
+	void (*cpu_enter_state)(int cpu, int state);
+	void (*cpu_exit_state)(int cpu, int state);
+	void (*cpu_up_prepare)(int cpu);
+	void (*cpu_die)(int cpu);
+	int (*plat_enter_sleep)(void);
+	void (*freeze_time_base)(bool freeze);
+
+	/* keep the power of IP blocks during sleep/deep sleep */
+	void (*set_ip_power)(bool enable, u32 mask);
+
+	/* get platform supported power management modes */
+	unsigned int (*get_pm_modes)(void);
+};
+
+extern const struct fsl_pm_ops *qoriq_pm_ops;
+
+int __init fsl_rcpm_init(void);
+
+#endif /* __PPC_FSL_PM_H */
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index ef89b1465573..50ca7585abe2 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -46,6 +46,8 @@
 extern void _mcount(void);
 
 #ifdef CONFIG_DYNAMIC_FTRACE
+# define FTRACE_ADDR ((unsigned long)ftrace_caller)
+# define FTRACE_REGS_ADDR FTRACE_ADDR
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
 {
        /* reloction of mcount call site is the same as the address */
@@ -58,6 +60,9 @@ struct dyn_arch_ftrace {
 #endif /*  CONFIG_DYNAMIC_FTRACE */
 #endif /* __ASSEMBLY__ */
 
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+#define ARCH_SUPPORTS_FTRACE_OPS 1
+#endif
 #endif
 
 #if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__)
diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/powerpc/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index caaf6e00630d..01c2c23b307e 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -84,19 +84,6 @@ static inline void *kmap_atomic(struct page *page)
 	return kmap_atomic_prot(page, kmap_prot);
 }
 
-static inline struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long idx, vaddr = (unsigned long) ptr;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-
 
 #define flush_cache_kmaps()	flush_cache_all()
 
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
index 7eac89b9f02e..42814f0567cc 100644
--- a/arch/powerpc/include/asm/hugetlb.h
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -19,7 +19,7 @@ static inline pte_t *hugepd_page(hugepd_t hpd)
 	 * We have only four bits to encode, MMU page size
 	 */
 	BUILD_BUG_ON((MMU_PAGE_COUNT - 1) > 0xf);
-	return (pte_t *)(hpd.pd & ~HUGEPD_SHIFT_MASK);
+	return __va(hpd.pd & HUGEPD_ADDR_MASK);
 }
 
 static inline unsigned int hugepd_mmu_psize(hugepd_t hpd)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 85bc8c0d257b..0bc9c284aa10 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -94,6 +94,7 @@
 #define H_SG_LIST	-72
 #define H_OP_MODE	-73
 #define H_COP_HW	-74
+#define H_STATE		-75
 #define H_UNSUPPORTED_FLAG_START	-256
 #define H_UNSUPPORTED_FLAG_END		-511
 #define H_MULTI_THREADS_ACTIVE	-9005
@@ -258,11 +259,16 @@
 #define H_DEL_CONN		0x288
 #define H_JOIN			0x298
 #define H_VASI_STATE            0x2A4
+#define H_VIOCTL		0x2A8
 #define H_ENABLE_CRQ		0x2B0
 #define H_GET_EM_PARMS		0x2B8
 #define H_SET_MPP		0x2D0
 #define H_GET_MPP		0x2D4
+#define H_REG_SUB_CRQ		0x2DC
 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC
+#define H_FREE_SUB_CRQ		0x2E0
+#define H_SEND_SUB_CRQ		0x2E4
+#define H_SEND_SUB_CRQ_INDIRECT	0x2E8
 #define H_BEST_ENERGY		0x2F4
 #define H_XIRR_X		0x2FC
 #define H_RANDOM		0x300
@@ -271,6 +277,21 @@
 #define H_SET_MODE		0x31C
 #define MAX_HCALL_OPCODE	H_SET_MODE
 
+/* H_VIOCTL functions */
+#define H_GET_VIOA_DUMP_SIZE	0x01
+#define H_GET_VIOA_DUMP		0x02
+#define H_GET_ILLAN_NUM_VLAN_IDS 0x03
+#define H_GET_ILLAN_VLAN_ID_LIST 0x04
+#define H_GET_ILLAN_SWITCH_ID	0x05
+#define H_DISABLE_MIGRATION	0x06
+#define H_ENABLE_MIGRATION	0x07
+#define H_GET_PARTNER_INFO	0x08
+#define H_GET_PARTNER_WWPN_LIST	0x09
+#define H_DISABLE_ALL_VIO_INTS	0x0A
+#define H_DISABLE_VIO_INTERRUPT	0x0B
+#define H_ENABLE_VIO_INTERRUPT	0x0C
+
+
 /* Platform specific hcalls, used by KVM */
 #define H_RTAS			0xf000
 
diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h
index 1cb39c96d155..b3b0f2d020f0 100644
--- a/arch/powerpc/include/asm/hydra.h
+++ b/arch/powerpc/include/asm/hydra.h
@@ -89,7 +89,7 @@ extern volatile struct Hydra __iomem *Hydra;
 #define HYDRA_INT_EXT2		13	/* PCI IRQX */
 #define HYDRA_INT_EXT3		14	/* PCI IRQY */
 #define HYDRA_INT_EXT4		15	/* PCI IRQZ */
-#define HYDRA_INT_EXT5		16	/* IDE Primay/Secondary */
+#define HYDRA_INT_EXT5		16	/* IDE Primary/Secondary */
 #define HYDRA_INT_EXT6		17	/* IDE Secondary */
 #define HYDRA_INT_EXT7		18	/* Power Off Request */
 #define HYDRA_INT_SPARE		19
diff --git a/arch/powerpc/include/asm/icswx.h b/arch/powerpc/include/asm/icswx.h
index 9f8402b35115..27e588f6c72e 100644
--- a/arch/powerpc/include/asm/icswx.h
+++ b/arch/powerpc/include/asm/icswx.h
@@ -164,6 +164,7 @@ struct coprocessor_request_block {
 #define ICSWX_INITIATED		(0x8)
 #define ICSWX_BUSY		(0x4)
 #define ICSWX_REJECTED		(0x2)
+#define ICSWX_XERS0		(0x1)	/* undefined or set from XERSO. */
 
 static inline int icswx(__be32 ccw, struct coprocessor_request_block *crb)
 {
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
deleted file mode 100644
index bedbff891423..000000000000
--- a/arch/powerpc/include/asm/immap_qe.h
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * QUICC Engine (QE) Internal Memory Map.
- * The Internal Memory Map for devices with QE on them. This
- * is the superset of all QE devices (8360, etc.).
-
- * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_IMMAP_QE_H
-#define _ASM_POWERPC_IMMAP_QE_H
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
-
-/* QE I-RAM */
-struct qe_iram {
-	__be32	iadd;		/* I-RAM Address Register */
-	__be32	idata;		/* I-RAM Data Register */
-	u8	res0[0x04];
-	__be32	iready;		/* I-RAM Ready Register */
-	u8	res1[0x70];
-} __attribute__ ((packed));
-
-/* QE Interrupt Controller */
-struct qe_ic_regs {
-	__be32	qicr;
-	__be32	qivec;
-	__be32	qripnr;
-	__be32	qipnr;
-	__be32	qipxcc;
-	__be32	qipycc;
-	__be32	qipwcc;
-	__be32	qipzcc;
-	__be32	qimr;
-	__be32	qrimr;
-	__be32	qicnr;
-	u8	res0[0x4];
-	__be32	qiprta;
-	__be32	qiprtb;
-	u8	res1[0x4];
-	__be32	qricr;
-	u8	res2[0x20];
-	__be32	qhivec;
-	u8	res3[0x1C];
-} __attribute__ ((packed));
-
-/* Communications Processor */
-struct cp_qe {
-	__be32	cecr;		/* QE command register */
-	__be32	ceccr;		/* QE controller configuration register */
-	__be32	cecdr;		/* QE command data register */
-	u8	res0[0xA];
-	__be16	ceter;		/* QE timer event register */
-	u8	res1[0x2];
-	__be16	cetmr;		/* QE timers mask register */
-	__be32	cetscr;		/* QE time-stamp timer control register */
-	__be32	cetsr1;		/* QE time-stamp register 1 */
-	__be32	cetsr2;		/* QE time-stamp register 2 */
-	u8	res2[0x8];
-	__be32	cevter;		/* QE virtual tasks event register */
-	__be32	cevtmr;		/* QE virtual tasks mask register */
-	__be16	cercr;		/* QE RAM control register */
-	u8	res3[0x2];
-	u8	res4[0x24];
-	__be16	ceexe1;		/* QE external request 1 event register */
-	u8	res5[0x2];
-	__be16	ceexm1;		/* QE external request 1 mask register */
-	u8	res6[0x2];
-	__be16	ceexe2;		/* QE external request 2 event register */
-	u8	res7[0x2];
-	__be16	ceexm2;		/* QE external request 2 mask register */
-	u8	res8[0x2];
-	__be16	ceexe3;		/* QE external request 3 event register */
-	u8	res9[0x2];
-	__be16	ceexm3;		/* QE external request 3 mask register */
-	u8	res10[0x2];
-	__be16	ceexe4;		/* QE external request 4 event register */
-	u8	res11[0x2];
-	__be16	ceexm4;		/* QE external request 4 mask register */
-	u8	res12[0x3A];
-	__be32	ceurnr;		/* QE microcode revision number register */
-	u8	res13[0x244];
-} __attribute__ ((packed));
-
-/* QE Multiplexer */
-struct qe_mux {
-	__be32	cmxgcr;		/* CMX general clock route register */
-	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
-	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
-	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
-	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
-	__be32	cmxupcr;	/* CMX UPC clock route register */
-	u8	res0[0x1C];
-} __attribute__ ((packed));
-
-/* QE Timers */
-struct qe_timers {
-	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
-	u8	res0[0x3];
-	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
-	u8	res1[0xB];
-	__be16	gtmdr1;		/* Timer 1 mode register */
-	__be16	gtmdr2;		/* Timer 2 mode register */
-	__be16	gtrfr1;		/* Timer 1 reference register */
-	__be16	gtrfr2;		/* Timer 2 reference register */
-	__be16	gtcpr1;		/* Timer 1 capture register */
-	__be16	gtcpr2;		/* Timer 2 capture register */
-	__be16	gtcnr1;		/* Timer 1 counter */
-	__be16	gtcnr2;		/* Timer 2 counter */
-	__be16	gtmdr3;		/* Timer 3 mode register */
-	__be16	gtmdr4;		/* Timer 4 mode register */
-	__be16	gtrfr3;		/* Timer 3 reference register */
-	__be16	gtrfr4;		/* Timer 4 reference register */
-	__be16	gtcpr3;		/* Timer 3 capture register */
-	__be16	gtcpr4;		/* Timer 4 capture register */
-	__be16	gtcnr3;		/* Timer 3 counter */
-	__be16	gtcnr4;		/* Timer 4 counter */
-	__be16	gtevr1;		/* Timer 1 event register */
-	__be16	gtevr2;		/* Timer 2 event register */
-	__be16	gtevr3;		/* Timer 3 event register */
-	__be16	gtevr4;		/* Timer 4 event register */
-	__be16	gtps;		/* Timer 1 prescale register */
-	u8 res2[0x46];
-} __attribute__ ((packed));
-
-/* BRG */
-struct qe_brg {
-	__be32	brgc[16];	/* BRG configuration registers */
-	u8	res0[0x40];
-} __attribute__ ((packed));
-
-/* SPI */
-struct spi {
-	u8	res0[0x20];
-	__be32	spmode;		/* SPI mode register */
-	u8	res1[0x2];
-	u8	spie;		/* SPI event register */
-	u8	res2[0x1];
-	u8	res3[0x2];
-	u8	spim;		/* SPI mask register */
-	u8	res4[0x1];
-	u8	res5[0x1];
-	u8	spcom;		/* SPI command register */
-	u8	res6[0x2];
-	__be32	spitd;		/* SPI transmit data register (cpu mode) */
-	__be32	spird;		/* SPI receive data register (cpu mode) */
-	u8	res7[0x8];
-} __attribute__ ((packed));
-
-/* SI */
-struct si1 {
-	__be16	siamr1;		/* SI1 TDMA mode register */
-	__be16	sibmr1;		/* SI1 TDMB mode register */
-	__be16	sicmr1;		/* SI1 TDMC mode register */
-	__be16	sidmr1;		/* SI1 TDMD mode register */
-	u8	siglmr1_h;	/* SI1 global mode register high */
-	u8	res0[0x1];
-	u8	sicmdr1_h;	/* SI1 command register high */
-	u8	res2[0x1];
-	u8	sistr1_h;	/* SI1 status register high */
-	u8	res3[0x1];
-	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
-	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
-	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
-	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
-	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
-	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
-	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
-	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
-	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
-	u8	res4[0x8];
-	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
-	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
-	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
-	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
-	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
-	u8	res5[0x1];
-	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
-	u8	res6[0x1];
-	u8	sistr1_l;	/* SI1 status register low 8 bits */
-	u8	res7[0x1];
-	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
-	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
-	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
-	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
-	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
-	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
-	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
-	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
-	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
-	u8	res8[0x8];
-	__be32	siml1;		/* SI1 multiframe limit register */
-	u8	siedm1;		/* SI1 extended diagnostic mode register */
-	u8	res9[0xBB];
-} __attribute__ ((packed));
-
-/* SI Routing Tables */
-struct sir {
-	u8 	tx[0x400];
-	u8	rx[0x400];
-	u8	res0[0x800];
-} __attribute__ ((packed));
-
-/* USB Controller */
-struct qe_usb_ctlr {
-	u8	usb_usmod;
-	u8	usb_usadr;
-	u8	usb_uscom;
-	u8	res1[1];
-	__be16  usb_usep[4];
-	u8	res2[4];
-	__be16	usb_usber;
-	u8	res3[2];
-	__be16	usb_usbmr;
-	u8	res4[1];
-	u8	usb_usbs;
-	__be16	usb_ussft;
-	u8	res5[2];
-	__be16	usb_usfrn;
-	u8	res6[0x22];
-} __attribute__ ((packed));
-
-/* MCC */
-struct qe_mcc {
-	__be32	mcce;		/* MCC event register */
-	__be32	mccm;		/* MCC mask register */
-	__be32	mccf;		/* MCC configuration register */
-	__be32	merl;		/* MCC emergency request level register */
-	u8	res0[0xF0];
-} __attribute__ ((packed));
-
-/* QE UCC Slow */
-struct ucc_slow {
-	__be32	gumr_l;		/* UCCx general mode register (low) */
-	__be32	gumr_h;		/* UCCx general mode register (high) */
-	__be16	upsmr;		/* UCCx protocol-specific mode register */
-	u8	res0[0x2];
-	__be16	utodr;		/* UCCx transmit on demand register */
-	__be16	udsr;		/* UCCx data synchronization register */
-	__be16	ucce;		/* UCCx event register */
-	u8	res1[0x2];
-	__be16	uccm;		/* UCCx mask register */
-	u8	res2[0x1];
-	u8	uccs;		/* UCCx status register */
-	u8	res3[0x24];
-	__be16	utpt;
-	u8	res4[0x52];
-	u8	guemr;		/* UCC general extended mode register */
-} __attribute__ ((packed));
-
-/* QE UCC Fast */
-struct ucc_fast {
-	__be32	gumr;		/* UCCx general mode register */
-	__be32	upsmr;		/* UCCx protocol-specific mode register */
-	__be16	utodr;		/* UCCx transmit on demand register */
-	u8	res0[0x2];
-	__be16	udsr;		/* UCCx data synchronization register */
-	u8	res1[0x2];
-	__be32	ucce;		/* UCCx event register */
-	__be32	uccm;		/* UCCx mask register */
-	u8	uccs;		/* UCCx status register */
-	u8	res2[0x7];
-	__be32	urfb;		/* UCC receive FIFO base */
-	__be16	urfs;		/* UCC receive FIFO size */
-	u8	res3[0x2];
-	__be16	urfet;		/* UCC receive FIFO emergency threshold */
-	__be16	urfset;		/* UCC receive FIFO special emergency
-				   threshold */
-	__be32	utfb;		/* UCC transmit FIFO base */
-	__be16	utfs;		/* UCC transmit FIFO size */
-	u8	res4[0x2];
-	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
-	u8	res5[0x2];
-	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
-	u8	res6[0x2];
-	__be16	utpt;		/* UCC transmit polling timer */
-	u8	res7[0x2];
-	__be32	urtry;		/* UCC retry counter register */
-	u8	res8[0x4C];
-	u8	guemr;		/* UCC general extended mode register */
-} __attribute__ ((packed));
-
-struct ucc {
-	union {
-		struct	ucc_slow slow;
-		struct	ucc_fast fast;
-		u8	res[0x200];	/* UCC blocks are 512 bytes each */
-	};
-} __attribute__ ((packed));
-
-/* MultiPHY UTOPIA POS Controllers (UPC) */
-struct upc {
-	__be32	upgcr;		/* UTOPIA/POS general configuration register */
-	__be32	uplpa;		/* UTOPIA/POS last PHY address */
-	__be32	uphec;		/* ATM HEC register */
-	__be32	upuc;		/* UTOPIA/POS UCC configuration */
-	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
-	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
-	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
-	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
-	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
-	u8	res0[0xC];
-	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
-	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
-	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
-	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
-	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
-	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
-	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
-	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
-	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
-	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
-	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
-	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
-	__be32	upde1;		/* UTOPIA/POS device 1 event */
-	__be32	upde2;		/* UTOPIA/POS device 2 event */
-	__be32	upde3;		/* UTOPIA/POS device 3 event */
-	__be32	upde4;		/* UTOPIA/POS device 4 event */
-	__be16	uprp1;
-	__be16	uprp2;
-	__be16	uprp3;
-	__be16	uprp4;
-	u8	res1[0x8];
-	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
-	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
-	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
-	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
-	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
-	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
-	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
-	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
-	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
-	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
-	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
-	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
-	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
-	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
-	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
-	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
-	__be32	uper1;		/* Device 1 port enable register */
-	__be32	uper2;		/* Device 2 port enable register */
-	__be32	uper3;		/* Device 3 port enable register */
-	__be32	uper4;		/* Device 4 port enable register */
-	u8	res2[0x150];
-} __attribute__ ((packed));
-
-/* SDMA */
-struct sdma {
-	__be32	sdsr;		/* Serial DMA status register */
-	__be32	sdmr;		/* Serial DMA mode register */
-	__be32	sdtr1;		/* SDMA system bus threshold register */
-	__be32	sdtr2;		/* SDMA secondary bus threshold register */
-	__be32	sdhy1;		/* SDMA system bus hysteresis register */
-	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
-	__be32	sdta1;		/* SDMA system bus address register */
-	__be32	sdta2;		/* SDMA secondary bus address register */
-	__be32	sdtm1;		/* SDMA system bus MSNUM register */
-	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
-	u8	res0[0x10];
-	__be32	sdaqr;		/* SDMA address bus qualify register */
-	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
-	u8	res1[0x4];
-	__be32	sdebcr;		/* SDMA CAM entries base register */
-	u8	res2[0x38];
-} __attribute__ ((packed));
-
-/* Debug Space */
-struct dbg {
-	__be32	bpdcr;		/* Breakpoint debug command register */
-	__be32	bpdsr;		/* Breakpoint debug status register */
-	__be32	bpdmr;		/* Breakpoint debug mask register */
-	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
-	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
-	u8	res0[0x8];
-	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
-	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
-	u8	res1[0x8];
-	__be32	bprmir;		/* Breakpoint request mode immediate register */
-	__be32	bprmsr;		/* Breakpoint request mode serial register */
-	__be32	bpemr;		/* Breakpoint exit mode register */
-	u8	res2[0x48];
-} __attribute__ ((packed));
-
-/*
- * RISC Special Registers (Trap and Breakpoint).  These are described in
- * the QE Developer's Handbook.
- */
-struct rsp {
-	__be32 tibcr[16];	/* Trap/instruction breakpoint control regs */
-	u8 res0[64];
-	__be32 ibcr0;
-	__be32 ibs0;
-	__be32 ibcnr0;
-	u8 res1[4];
-	__be32 ibcr1;
-	__be32 ibs1;
-	__be32 ibcnr1;
-	__be32 npcr;
-	__be32 dbcr;
-	__be32 dbar;
-	__be32 dbamr;
-	__be32 dbsr;
-	__be32 dbcnr;
-	u8 res2[12];
-	__be32 dbdr_h;
-	__be32 dbdr_l;
-	__be32 dbdmr_h;
-	__be32 dbdmr_l;
-	__be32 bsr;
-	__be32 bor;
-	__be32 bior;
-	u8 res3[4];
-	__be32 iatr[4];
-	__be32 eccr;		/* Exception control configuration register */
-	__be32 eicr;
-	u8 res4[0x100-0xf8];
-} __attribute__ ((packed));
-
-struct qe_immap {
-	struct qe_iram		iram;		/* I-RAM */
-	struct qe_ic_regs	ic;		/* Interrupt Controller */
-	struct cp_qe		cp;		/* Communications Processor */
-	struct qe_mux		qmx;		/* QE Multiplexer */
-	struct qe_timers	qet;		/* QE Timers */
-	struct spi		spi[0x2];	/* spi */
-	struct qe_mcc		mcc;		/* mcc */
-	struct qe_brg		brg;		/* brg */
-	struct qe_usb_ctlr	usb;		/* USB */
-	struct si1		si1;		/* SI */
-	u8			res11[0x800];
-	struct sir		sir;		/* SI Routing Tables */
-	struct ucc		ucc1;		/* ucc1 */
-	struct ucc		ucc3;		/* ucc3 */
-	struct ucc		ucc5;		/* ucc5 */
-	struct ucc		ucc7;		/* ucc7 */
-	u8			res12[0x600];
-	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
-	struct ucc		ucc2;		/* ucc2 */
-	struct ucc		ucc4;		/* ucc4 */
-	struct ucc		ucc6;		/* ucc6 */
-	struct ucc		ucc8;		/* ucc8 */
-	u8			res13[0x600];
-	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
-	struct sdma		sdma;		/* SDMA */
-	struct dbg		dbg;		/* 0x104080 - 0x1040FF
-						   Debug Space */
-	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
-						   RISC Special Registers
-						   (Trap and Breakpoint) */
-	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
-	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
-	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
-	u8			muram[0xC000];	/* 0x110000 - 0x11C000
-						   Multi-user RAM */
-	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
-	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
-} __attribute__ ((packed));
-
-extern struct qe_immap __iomem *qe_immr;
-extern phys_addr_t get_qe_base(void);
-
-/*
- * Returns the offset within the QE address space of the given pointer.
- *
- * Note that the QE does not support 36-bit physical addresses, so if
- * get_qe_base() returns a number above 4GB, the caller will probably fail.
- */
-static inline phys_addr_t immrbar_virt_to_phys(void *address)
-{
-	void *q = (void *)qe_immr;
-
-	/* Is it a MURAM address? */
-	if ((address >= q) && (address < (q + QE_IMMAP_SIZE)))
-		return get_qe_base() + (address - q);
-
-	/* It's an address returned by kmalloc */
-	return virt_to_phys(address);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 5879fde56f3c..2fd1690b79d2 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -300,7 +300,7 @@ extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
  * When CONFIG_PPC_INDIRECT_MMIO is set, the platform can provide hooks
  * on all MMIOs. (Note that this is all 64 bits only for now)
  *
- * To help platforms who may need to differenciate MMIO addresses in
+ * To help platforms who may need to differentiate MMIO addresses in
  * their hooks, a bitfield is reserved for use by the platform near the
  * top of MMIO addresses (not PIO, those have to cope the hard way).
  *
@@ -385,6 +385,17 @@ static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
 {
 	*(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
 }
+
+/*
+ * Real mode version of the above. stdcix is only supposed to be used
+ * in hypervisor real mode as per the architecture spec.
+ */
+static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
+{
+	__asm__ __volatile__("stdcix %0,0,%1"
+		: : "r" (val), "r" (paddr) : "memory");
+}
+
 #endif /* __powerpc64__ */
 
 /*
diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h
index 9fac01cb89c1..8f39796c9da8 100644
--- a/arch/powerpc/include/asm/kvm_book3s.h
+++ b/arch/powerpc/include/asm/kvm_book3s.h
@@ -154,8 +154,8 @@ extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
 			   bool upper, u32 val);
 extern void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr);
 extern int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu);
-extern pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa, bool writing,
-			bool *writable);
+extern kvm_pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa,
+			bool writing, bool *writable);
 extern void kvmppc_add_revmap_chain(struct kvm *kvm, struct revmap_entry *rev,
 			unsigned long *rmap, long pte_index, int realmode);
 extern void kvmppc_update_rmap_change(unsigned long *rmap, unsigned long psize);
diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h
index 2aa79c864e91..7529aab068f5 100644
--- a/arch/powerpc/include/asm/kvm_book3s_64.h
+++ b/arch/powerpc/include/asm/kvm_book3s_64.h
@@ -33,8 +33,6 @@ static inline void svcpu_put(struct kvmppc_book3s_shadow_vcpu *svcpu)
 }
 #endif
 
-#define SPAPR_TCE_SHIFT		12
-
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 #define KVM_DEFAULT_HPT_ORDER	24	/* 16MB HPT by default */
 #endif
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index cfa758c6b4f6..d7b343170453 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -38,8 +38,7 @@
 
 #define KVM_MAX_VCPUS		NR_CPUS
 #define KVM_MAX_VCORES		NR_CPUS
-#define KVM_USER_MEM_SLOTS 32
-#define KVM_MEM_SLOTS_NUM KVM_USER_MEM_SLOTS
+#define KVM_USER_MEM_SLOTS	512
 
 #ifdef CONFIG_KVM_MMIO
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
@@ -50,6 +49,10 @@
 #define KVM_NR_IRQCHIPS          1
 #define KVM_IRQCHIP_NUM_PINS     256
 
+/* PPC-specific vcpu->requests bit members */
+#define KVM_REQ_WATCHDOG           8
+#define KVM_REQ_EPR_EXIT           9
+
 #include <linux/mmu_notifier.h>
 
 #define KVM_ARCH_WANT_MMU_NOTIFIER
@@ -179,7 +182,10 @@ struct kvmppc_spapr_tce_table {
 	struct list_head list;
 	struct kvm *kvm;
 	u64 liobn;
-	u32 window_size;
+	struct rcu_head rcu;
+	u32 page_shift;
+	u64 offset;		/* in pages */
+	u64 size;		/* window size in pages */
 	struct page *pages[0];
 };
 
@@ -286,7 +292,7 @@ struct kvmppc_vcore {
 	struct list_head runnable_threads;
 	struct list_head preempt_list;
 	spinlock_t lock;
-	wait_queue_head_t wq;
+	struct swait_queue_head wq;
 	spinlock_t stoltb_lock;	/* protects stolen_tb and preempt_tb */
 	u64 stolen_tb;
 	u64 preempt_tb;
@@ -626,7 +632,7 @@ struct kvm_vcpu_arch {
 	u8 prodded;
 	u32 last_inst;
 
-	wait_queue_head_t *wqp;
+	struct swait_queue_head *wqp;
 	struct kvmppc_vcore *vcore;
 	int ret;
 	int trap;
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index c6ef05bd0765..2544edabe7f3 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -165,9 +165,25 @@ extern void kvmppc_map_vrma(struct kvm_vcpu *vcpu,
 extern int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu);
 
 extern long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
-				struct kvm_create_spapr_tce *args);
+				struct kvm_create_spapr_tce_64 *args);
+extern struct kvmppc_spapr_tce_table *kvmppc_find_table(
+		struct kvm_vcpu *vcpu, unsigned long liobn);
+extern long kvmppc_ioba_validate(struct kvmppc_spapr_tce_table *stt,
+		unsigned long ioba, unsigned long npages);
+extern long kvmppc_tce_validate(struct kvmppc_spapr_tce_table *tt,
+		unsigned long tce);
+extern long kvmppc_gpa_to_ua(struct kvm *kvm, unsigned long gpa,
+		unsigned long *ua, unsigned long **prmap);
+extern void kvmppc_tce_put(struct kvmppc_spapr_tce_table *tt,
+		unsigned long idx, unsigned long tce);
 extern long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 			     unsigned long ioba, unsigned long tce);
+extern long kvmppc_h_put_tce_indirect(struct kvm_vcpu *vcpu,
+		unsigned long liobn, unsigned long ioba,
+		unsigned long tce_list, unsigned long npages);
+extern long kvmppc_h_stuff_tce(struct kvm_vcpu *vcpu,
+		unsigned long liobn, unsigned long ioba,
+		unsigned long tce_value, unsigned long npages);
 extern long kvmppc_h_get_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 			     unsigned long ioba);
 extern struct page *kvm_alloc_hpt(unsigned long nr_pages);
@@ -437,6 +453,8 @@ static inline int kvmppc_xics_enabled(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.irq_type == KVMPPC_IRQ_XICS;
 }
+extern void kvmppc_alloc_host_rm_ops(void);
+extern void kvmppc_free_host_rm_ops(void);
 extern void kvmppc_xics_free_icp(struct kvm_vcpu *vcpu);
 extern int kvmppc_xics_create_icp(struct kvm_vcpu *vcpu, unsigned long server);
 extern int kvm_vm_ioctl_xics_irq(struct kvm *kvm, struct kvm_irq_level *args);
@@ -445,7 +463,11 @@ extern u64 kvmppc_xics_get_icp(struct kvm_vcpu *vcpu);
 extern int kvmppc_xics_set_icp(struct kvm_vcpu *vcpu, u64 icpval);
 extern int kvmppc_xics_connect_vcpu(struct kvm_device *dev,
 			struct kvm_vcpu *vcpu, u32 cpu);
+extern void kvmppc_xics_ipi_action(void);
+extern int h_ipi_redirect;
 #else
+static inline void kvmppc_alloc_host_rm_ops(void) {};
+static inline void kvmppc_free_host_rm_ops(void) {};
 static inline int kvmppc_xics_enabled(struct kvm_vcpu *vcpu)
 	{ return 0; }
 static inline void kvmppc_xics_free_icp(struct kvm_vcpu *vcpu) { }
@@ -459,6 +481,33 @@ static inline int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 cmd)
 	{ return 0; }
 #endif
 
+/*
+ * Host-side operations we want to set up while running in real
+ * mode in the guest operating on the xics.
+ * Currently only VCPU wakeup is supported.
+ */
+
+union kvmppc_rm_state {
+	unsigned long raw;
+	struct {
+		u32 in_host;
+		u32 rm_action;
+	};
+};
+
+struct kvmppc_host_rm_core {
+	union kvmppc_rm_state rm_state;
+	void *rm_data;
+	char pad[112];
+};
+
+struct kvmppc_host_rm_ops {
+	struct kvmppc_host_rm_core	*rm_core;
+	void		(*vcpu_kick)(struct kvm_vcpu *vcpu);
+};
+
+extern struct kvmppc_host_rm_ops *kvmppc_host_rm_ops_hv;
+
 static inline unsigned long kvmppc_get_epr(struct kvm_vcpu *vcpu)
 {
 #ifdef CONFIG_KVM_BOOKE_HV
@@ -515,7 +564,7 @@ void kvmppc_claim_lpid(long lpid);
 void kvmppc_free_lpid(long lpid);
 void kvmppc_init_lpid(unsigned long nr_lpids);
 
-static inline void kvmppc_mmu_flush_icache(pfn_t pfn)
+static inline void kvmppc_mmu_flush_icache(kvm_pfn_t pfn)
 {
 	struct page *page;
 	/*
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 3f191f573d4f..fd22442d30a9 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -54,7 +54,7 @@ struct machdep_calls {
 				       int psize, int apsize,
 				       int ssize);
 	long		(*hpte_remove)(unsigned long hpte_group);
-	void            (*hpte_removebolted)(unsigned long ea,
+	int             (*hpte_removebolted)(unsigned long ea,
 					     int psize, int ssize);
 	void		(*flush_hash_range)(unsigned long number, int local);
 	void		(*hugepage_invalidate)(unsigned long vsid,
@@ -174,11 +174,11 @@ struct machdep_calls {
 	   platform, called once per cpu. */
 	void		(*enable_pmcs)(void);
 
-	/* Set DABR for this platform, leave empty for default implemenation */
+	/* Set DABR for this platform, leave empty for default implementation */
 	int		(*set_dabr)(unsigned long dabr,
 				    unsigned long dabrx);
 
-	/* Set DAWR for this platform, leave empty for default implemenation */
+	/* Set DAWR for this platform, leave empty for default implementation */
 	int		(*set_dawr)(unsigned long dawr,
 				    unsigned long dawrx);
 
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
index 8565c254151a..2563c435a4b1 100644
--- a/arch/powerpc/include/asm/mman.h
+++ b/arch/powerpc/include/asm/mman.h
@@ -18,11 +18,12 @@
  * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits()
  * here.  How important is the optimization?
  */
-static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
+		unsigned long pkey)
 {
 	return (prot & PROT_SAO) ? VM_SAO : 0;
 }
-#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot)
+#define arch_calc_vm_prot_bits(prot, pkey) arch_calc_vm_prot_bits(prot, pkey)
 
 static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
 {
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index f05500a29a60..0a566f15f985 100644
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -171,9 +171,9 @@ typedef struct {
 } mm_context_t;
 #endif /* !__ASSEMBLY__ */
 
-#if (PAGE_SHIFT == 12)
+#if defined(CONFIG_PPC_4K_PAGES)
 #define mmu_virtual_psize	MMU_PAGE_4K
-#elif (PAGE_SHIFT == 14)
+#elif defined(CONFIG_PPC_16K_PAGES)
 #define mmu_virtual_psize	MMU_PAGE_16K
 #else
 #error "Unsupported PAGE_SIZE"
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 3d5abfe6ba67..8ca1c983bf6c 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -97,6 +97,7 @@
 #define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_POWER8		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER9		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
 				MMU_FTR_CI_LARGE_PAGE
 #define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
@@ -182,10 +183,10 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 
 #if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */
-#  include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 #elif defined(CONFIG_PPC_STD_MMU_32)
 /* 32-bit classic hash table MMU */
-#  include <asm/mmu-hash32.h>
+#include <asm/book3s/32/mmu-hash.h>
 #elif defined(CONFIG_40x)
 /* 40x-style software loaded TLB */
 #  include <asm/mmu-40x.h>
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 878c27771717..4eaab40e3ade 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -148,5 +148,17 @@ static inline void arch_bprm_mm_init(struct mm_struct *mm,
 {
 }
 
+static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
+		bool write, bool execute, bool foreign)
+{
+	/* by default, allow everything */
+	return true;
+}
+
+static inline bool arch_pte_access_permitted(pte_t pte, bool write)
+{
+	/* by default, allow everything */
+	return true;
+}
 #endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index dcfcad139bcc..cd4ffd86765f 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -19,7 +19,7 @@
  * Thanks to Paul M for explaining this.
  *
  * PPC can only do rel jumps += 32MB, and often the kernel and other
- * modules are furthur away than this.  So, we jump to a table of
+ * modules are further away than this.  So, we jump to a table of
  * trampolines attached to the module (the Procedure Linkage Table)
  * whenever that happens.
  */
@@ -78,10 +78,18 @@ struct mod_arch_specific {
 #    endif	/* MODULE */
 #endif
 
-bool is_module_trampoline(u32 *insns);
-int module_trampoline_target(struct module *mod, u32 *trampoline,
+int module_trampoline_target(struct module *mod, unsigned long trampoline,
 			     unsigned long *target);
 
+#ifdef CONFIG_DYNAMIC_FTRACE
+int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs);
+#else
+static inline int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs)
+{
+	return 0;
+}
+#endif
+
 struct exception_table_entry;
 void sort_ex_table(struct exception_table_entry *start,
 		   struct exception_table_entry *finish);
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index 9c326565d498..780847597514 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
-#define _ASM_POWERPC_PGTABLE_PPC32_H
+#ifndef _ASM_POWERPC_NOHASH_32_PGTABLE_H
+#define _ASM_POWERPC_NOHASH_32_PGTABLE_H
 
 #include <asm-generic/pgtable-nopmd.h>
 
@@ -86,7 +86,7 @@ extern int icache_44x_need_flush;
  * We no longer map larger than phys RAM with the BATs so we don't have
  * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
  * about clashes between our early calls to ioremap() that start growing down
- * from ioremap_base being run into the VM area allocations (growing upwards
+ * from IOREMAP_TOP being run into the VM area allocations (growing upwards
  * from VMALLOC_START).  For this reason we have ioremap_bot to check when
  * we actually run into our mappings setup in the early boot with the VM
  * system.  This really does become a problem for machines with good amounts
@@ -106,17 +106,15 @@ extern int icache_44x_need_flush;
  */
 
 #if defined(CONFIG_40x)
-#include <asm/pte-40x.h>
+#include <asm/nohash/32/pte-40x.h>
 #elif defined(CONFIG_44x)
-#include <asm/pte-44x.h>
+#include <asm/nohash/32/pte-44x.h>
 #elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
-#include <asm/pte-book3e.h>
+#include <asm/nohash/pte-book3e.h>
 #elif defined(CONFIG_FSL_BOOKE)
-#include <asm/pte-fsl-booke.h>
+#include <asm/nohash/32/pte-fsl-booke.h>
 #elif defined(CONFIG_8xx)
-#include <asm/pte-8xx.h>
-#else /* CONFIG_6xx */
-#include <asm/pte-hash32.h>
+#include <asm/nohash/32/pte-8xx.h>
 #endif
 
 /* And here we include common definitions */
@@ -130,7 +128,12 @@ extern int icache_44x_need_flush;
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
 #define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
-#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
+
+
 
 /*
  * When flushing the tlb entry for a page, we also need to flush the hash
@@ -306,7 +309,8 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 #define pte_index(address)		\
 	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 #define pte_offset_kernel(dir, addr)	\
-	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+	(pmd_bad(*(dir)) ? NULL : (pte_t *)pmd_page_vaddr(*(dir)) + \
+				  pte_index(addr))
 #define pte_offset_map(dir, addr)		\
 	((pte_t *) kmap_atomic(pmd_page(*(dir))) + pte_index(addr))
 #define pte_unmap(pte)		kunmap_atomic(pte)
@@ -337,4 +341,4 @@ extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
 
 #endif /* !__ASSEMBLY__ */
 
-#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
+#endif /* __ASM_POWERPC_NOHASH_32_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/nohash/32/pte-40x.h
index 486b1ef81338..9624ebdacc47 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-40x.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_40x_H
-#define _ASM_POWERPC_PTE_40x_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_40x_H
+#define _ASM_POWERPC_NOHASH_32_PTE_40x_H
 #ifdef __KERNEL__
 
 /*
@@ -61,4 +61,4 @@
 #define PTE_ATOMIC_UPDATES	1
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_40x_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_40x_H */
diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/nohash/32/pte-44x.h
index 36f75fab23f5..fdab41c654ef 100644
--- a/arch/powerpc/include/asm/pte-44x.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-44x.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_44x_H
-#define _ASM_POWERPC_PTE_44x_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_44x_H
+#define _ASM_POWERPC_NOHASH_32_PTE_44x_H
 #ifdef __KERNEL__
 
 /*
@@ -94,4 +94,4 @@
 
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_44x_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_44x_H */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
index a0e2ba960976..3742b1919661 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_8xx_H
-#define _ASM_POWERPC_PTE_8xx_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_8xx_H
+#define _ASM_POWERPC_NOHASH_32_PTE_8xx_H
 #ifdef __KERNEL__
 
 /*
@@ -62,4 +62,4 @@
 				 _PAGE_HWWRITE | _PAGE_EXEC)
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_8xx_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_8xx_H */
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/nohash/32/pte-fsl-booke.h
index 9f5c3d04a1a3..5422d00c6145 100644
--- a/arch/powerpc/include/asm/pte-fsl-booke.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-fsl-booke.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_FSL_BOOKE_H
-#define _ASM_POWERPC_PTE_FSL_BOOKE_H
+#ifndef _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H
+#define _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H
 #ifdef __KERNEL__
 
 /* PTE bit definitions for Freescale BookE SW loaded TLB MMU based
@@ -37,4 +37,4 @@
 #define PTE_WIMGE_SHIFT (6)
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_FSL_BOOKE_H */
+#endif /*  _ASM_POWERPC_NOHASH_32_PTE_FSL_BOOKE_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-4k.h b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
index 132ee1d482c2..fc7d51753f81 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-4k.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_4K_H
-#define _ASM_POWERPC_PGTABLE_PPC64_4K_H
+#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H
+#define _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H
 /*
  * Entries per page directory level.  The PTE level must use a 64b record
  * for each page table entry.  The PMD and PGD level use a 32b record for
@@ -55,11 +55,15 @@
 #define pgd_none(pgd)		(!pgd_val(pgd))
 #define pgd_bad(pgd)		(pgd_val(pgd) == 0)
 #define pgd_present(pgd)	(pgd_val(pgd) != 0)
-#define pgd_clear(pgdp)		(pgd_val(*(pgdp)) = 0)
 #define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
 
 #ifndef __ASSEMBLY__
 
+static inline void pgd_clear(pgd_t *pgdp)
+{
+	*pgdp = __pgd(0);
+}
+
 static inline pte_t pgd_pte(pgd_t pgd)
 {
 	return __pte(pgd_val(pgd));
@@ -85,4 +89,4 @@ extern struct page *pgd_page(pgd_t pgd);
 #define remap_4k_pfn(vma, addr, pfn, prot)	\
 	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
 
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_4K_H */
+#endif /* _ _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h
index 1de35bbd02a6..570fb30be21c 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_64K_H
-#define _ASM_POWERPC_PGTABLE_PPC64_64K_H
+#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H
+#define _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H
 
 #include <asm-generic/pgtable-nopud.h>
 
@@ -9,8 +9,19 @@
 #define PUD_INDEX_SIZE	0
 #define PGD_INDEX_SIZE  12
 
+/*
+ * we support 32 fragments per PTE page of 64K size
+ */
+#define PTE_FRAG_NR	32
+/*
+ * We use a 2K PTE page fragment and another 2K for storing
+ * real_pte_t hash index
+ */
+#define PTE_FRAG_SIZE_SHIFT  11
+#define PTE_FRAG_SIZE (1UL << PTE_FRAG_SIZE_SHIFT)
+
 #ifndef __ASSEMBLY__
-#define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
+#define PTE_TABLE_SIZE	PTE_FRAG_SIZE
 #define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
 #define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
 #endif	/* __ASSEMBLY__ */
@@ -32,13 +43,15 @@
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
-/* Bits to mask out from a PMD to get to the PTE page */
-/* PMDs point to PTE table fragments which are 4K aligned.  */
-#define PMD_MASKED_BITS		0xfff
+/*
+ * Bits to mask out from a PMD to get to the PTE page
+ * PMDs point to PTE table fragments which are PTE_FRAG_SIZE aligned.
+ */
+#define PMD_MASKED_BITS		(PTE_FRAG_SIZE - 1)
 /* Bits to mask out from a PGD/PUD to get to the PMD page */
 #define PUD_MASKED_BITS		0x1ff
 
 #define pgd_pte(pgd)	(pud_pte(((pud_t){ pgd })))
 #define pte_pgd(pte)	((pgd_t)pte_pud(pte))
 
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_64K_H */
+#endif /* _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 3245f2d96d4f..10debb93c4a4 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -1,14 +1,14 @@
-#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
-#define _ASM_POWERPC_PGTABLE_PPC64_H_
+#ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_H
+#define _ASM_POWERPC_NOHASH_64_PGTABLE_H
 /*
  * This file contains the functions and defines necessary to modify and use
  * the ppc64 hashed page table.
  */
 
 #ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pgtable-ppc64-64k.h>
+#include <asm/nohash/64/pgtable-64k.h>
 #else
-#include <asm/pgtable-ppc64-4k.h>
+#include <asm/nohash/64/pgtable-4k.h>
 #endif
 #include <asm/barrier.h>
 
@@ -18,7 +18,7 @@
  * Size of EA range mapped by our pagetables.
  */
 #define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
-                	    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+			    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
 #define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
@@ -97,11 +97,7 @@
 /*
  * Include the PTE bits definitions
  */
-#ifdef CONFIG_PPC_BOOK3S
-#include <asm/pte-hash64.h>
-#else
-#include <asm/pte-book3e.h>
-#endif
+#include <asm/nohash/pte-book3e.h>
 #include <asm/pte-common.h>
 
 #ifdef CONFIG_PPC_MM_SLICES
@@ -110,59 +106,50 @@
 #endif /* CONFIG_PPC_MM_SLICES */
 
 #ifndef __ASSEMBLY__
+/* pte_clear moved to later in this file */
 
-/*
- * This is the default implementation of various PTE accessors, it's
- * used in all cases except Book3S with 64K pages where we have a
- * concept of sub-pages
- */
-#ifndef __real_pte
-
-#ifdef CONFIG_STRICT_MM_TYPECHECKS
-#define __real_pte(e,p)		((real_pte_t){(e)})
-#define __rpte_to_pte(r)	((r).pte)
-#else
-#define __real_pte(e,p)		(e)
-#define __rpte_to_pte(r)	(__pte(r))
-#endif
-#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> 12)
-
-#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
-	do {							         \
-		index = 0;					         \
-		shift = mmu_psize_defs[psize].shift;		         \
-
-#define pte_iterate_hashed_end() } while(0)
-
-/*
- * We expect this to be called only for user addresses or kernel virtual
- * addresses other than the linear mapping.
- */
-#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
+/* Pointers in the page table tree are virtual addresses */
+#define __pgtable_ptr_val(ptr)	((unsigned long)(ptr))
 
-#endif /* __real_pte */
+#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
+#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
 
+static inline void pmd_set(pmd_t *pmdp, unsigned long val)
+{
+	*pmdp = __pmd(val);
+}
 
-/* pte_clear moved to later in this file */
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	*pmdp = __pmd(0);
+}
 
-#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
-#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
+static inline pte_t pmd_pte(pmd_t pmd)
+{
+	return __pte(pmd_val(pmd));
+}
 
-#define pmd_set(pmdp, pmdval) 	(pmd_val(*(pmdp)) = (pmdval))
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define	pmd_bad(pmd)		(!is_kernel_addr(pmd_val(pmd)) \
 				 || (pmd_val(pmd) & PMD_BAD_BITS))
 #define	pmd_present(pmd)	(!pmd_none(pmd))
-#define	pmd_clear(pmdp)		(pmd_val(*(pmdp)) = 0)
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
 extern struct page *pmd_page(pmd_t pmd);
 
-#define pud_set(pudp, pudval)	(pud_val(*(pudp)) = (pudval))
+static inline void pud_set(pud_t *pudp, unsigned long val)
+{
+	*pudp = __pud(val);
+}
+
+static inline void pud_clear(pud_t *pudp)
+{
+	*pudp = __pud(0);
+}
+
 #define pud_none(pud)		(!pud_val(pud))
 #define	pud_bad(pud)		(!is_kernel_addr(pud_val(pud)) \
 				 || (pud_val(pud) & PUD_BAD_BITS))
 #define pud_present(pud)	(pud_val(pud) != 0)
-#define pud_clear(pudp)		(pud_val(*(pudp)) = 0)
 #define pud_page_vaddr(pud)	(pud_val(pud) & ~PUD_MASKED_BITS)
 
 extern struct page *pud_page(pud_t pud);
@@ -177,9 +164,13 @@ static inline pud_t pte_pud(pte_t pte)
 	return __pud(pte_val(pte));
 }
 #define pud_write(pud)		pte_write(pud_pte(pud))
-#define pgd_set(pgdp, pudp)	({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
 #define pgd_write(pgd)		pte_write(pgd_pte(pgd))
 
+static inline void pgd_set(pgd_t *pgdp, unsigned long val)
+{
+	*pgdp = __pgd(val);
+}
+
 /*
  * Find an entry in a page-table-directory.  We combine the address region
  * (the high order N bits) and the pgd portion of the address.
@@ -373,254 +364,4 @@ void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
 void pgtable_cache_init(void);
 #endif /* __ASSEMBLY__ */
 
-/*
- * THP pages can't be special. So use the _PAGE_SPECIAL
- */
-#define _PAGE_SPLITTING _PAGE_SPECIAL
-
-/*
- * We need to differentiate between explicit huge page and THP huge
- * page, since THP huge page also need to track real subpage details
- */
-#define _PAGE_THP_HUGE  _PAGE_4K_PFN
-
-/*
- * set of bits not changed in pmd_modify.
- */
-#define _HPAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS |		\
-			 _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SPLITTING | \
-			 _PAGE_THP_HUGE)
-
-#ifndef __ASSEMBLY__
-/*
- * The linux hugepage PMD now include the pmd entries followed by the address
- * to the stashed pgtable_t. The stashed pgtable_t contains the hpte bits.
- * [ 1 bit secondary | 3 bit hidx | 1 bit valid | 000]. We use one byte per
- * each HPTE entry. With 16MB hugepage and 64K HPTE we need 256 entries and
- * with 4K HPTE we need 4096 entries. Both will fit in a 4K pgtable_t.
- *
- * The last three bits are intentionally left to zero. This memory location
- * are also used as normal page PTE pointers. So if we have any pointers
- * left around while we collapse a hugepage, we need to make sure
- * _PAGE_PRESENT bit of that is zero when we look at them
- */
-static inline unsigned int hpte_valid(unsigned char *hpte_slot_array, int index)
-{
-	return (hpte_slot_array[index] >> 3) & 0x1;
-}
-
-static inline unsigned int hpte_hash_index(unsigned char *hpte_slot_array,
-					   int index)
-{
-	return hpte_slot_array[index] >> 4;
-}
-
-static inline void mark_hpte_slot_valid(unsigned char *hpte_slot_array,
-					unsigned int index, unsigned int hidx)
-{
-	hpte_slot_array[index] = hidx << 4 | 0x1 << 3;
-}
-
-struct page *realmode_pfn_to_page(unsigned long pfn);
-
-static inline char *get_hpte_slot_array(pmd_t *pmdp)
-{
-	/*
-	 * The hpte hindex is stored in the pgtable whose address is in the
-	 * second half of the PMD
-	 *
-	 * Order this load with the test for pmd_trans_huge in the caller
-	 */
-	smp_rmb();
-	return *(char **)(pmdp + PTRS_PER_PMD);
-
-
-}
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-extern void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
-				   pmd_t *pmdp, unsigned long old_pmd);
-extern pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot);
-extern pmd_t mk_pmd(struct page *page, pgprot_t pgprot);
-extern pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot);
-extern void set_pmd_at(struct mm_struct *mm, unsigned long addr,
-		       pmd_t *pmdp, pmd_t pmd);
-extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
-				 pmd_t *pmd);
-/*
- *
- * For core kernel code by design pmd_trans_huge is never run on any hugetlbfs
- * page. The hugetlbfs page table walking and mangling paths are totally
- * separated form the core VM paths and they're differentiated by
- *  VM_HUGETLB being set on vm_flags well before any pmd_trans_huge could run.
- *
- * pmd_trans_huge() is defined as false at build time if
- * CONFIG_TRANSPARENT_HUGEPAGE=n to optimize away code blocks at build
- * time in such case.
- *
- * For ppc64 we need to differntiate from explicit hugepages from THP, because
- * for THP we also track the subpage details at the pmd level. We don't do
- * that for explicit huge pages.
- *
- */
-static inline int pmd_trans_huge(pmd_t pmd)
-{
-	/*
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	return (pmd_val(pmd) & 0x3) && (pmd_val(pmd) & _PAGE_THP_HUGE);
-}
-
-static inline int pmd_trans_splitting(pmd_t pmd)
-{
-	if (pmd_trans_huge(pmd))
-		return pmd_val(pmd) & _PAGE_SPLITTING;
-	return 0;
-}
-
-extern int has_transparent_hugepage(void);
-#else
-static inline void hpte_do_hugepage_flush(struct mm_struct *mm,
-					  unsigned long addr, pmd_t *pmdp,
-					  unsigned long old_pmd)
-{
-
-	WARN(1, "%s called with THP disabled\n", __func__);
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
-static inline int pmd_large(pmd_t pmd)
-{
-	/*
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	return ((pmd_val(pmd) & 0x3) != 0x0);
-}
-
-static inline pte_t pmd_pte(pmd_t pmd)
-{
-	return __pte(pmd_val(pmd));
-}
-
-static inline pmd_t pte_pmd(pte_t pte)
-{
-	return __pmd(pte_val(pte));
-}
-
-static inline pte_t *pmdp_ptep(pmd_t *pmd)
-{
-	return (pte_t *)pmd;
-}
-
-#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
-#define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
-#define pmd_young(pmd)		pte_young(pmd_pte(pmd))
-#define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
-#define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
-#define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
-#define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
-#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
-
-#define __HAVE_ARCH_PMD_WRITE
-#define pmd_write(pmd)		pte_write(pmd_pte(pmd))
-
-static inline pmd_t pmd_mkhuge(pmd_t pmd)
-{
-	/* Do nothing, mk_pmd() does this part.  */
-	return pmd;
-}
-
-static inline pmd_t pmd_mknotpresent(pmd_t pmd)
-{
-	pmd_val(pmd) &= ~_PAGE_PRESENT;
-	return pmd;
-}
-
-static inline pmd_t pmd_mksplitting(pmd_t pmd)
-{
-	pmd_val(pmd) |= _PAGE_SPLITTING;
-	return pmd;
-}
-
-#define __HAVE_ARCH_PMD_SAME
-static inline int pmd_same(pmd_t pmd_a, pmd_t pmd_b)
-{
-	return (((pmd_val(pmd_a) ^ pmd_val(pmd_b)) & ~_PAGE_HPTEFLAGS) == 0);
-}
-
-#define __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
-extern int pmdp_set_access_flags(struct vm_area_struct *vma,
-				 unsigned long address, pmd_t *pmdp,
-				 pmd_t entry, int dirty);
-
-extern unsigned long pmd_hugepage_update(struct mm_struct *mm,
-					 unsigned long addr,
-					 pmd_t *pmdp,
-					 unsigned long clr,
-					 unsigned long set);
-
-static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
-					      unsigned long addr, pmd_t *pmdp)
-{
-	unsigned long old;
-
-	if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
-		return 0;
-	old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0);
-	return ((old & _PAGE_ACCESSED) != 0);
-}
-
-#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
-extern int pmdp_test_and_clear_young(struct vm_area_struct *vma,
-				     unsigned long address, pmd_t *pmdp);
-#define __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
-extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
-				  unsigned long address, pmd_t *pmdp);
-
-#define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
-extern pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
-				     unsigned long addr, pmd_t *pmdp);
-
-#define __HAVE_ARCH_PMDP_SET_WRPROTECT
-static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
-				      pmd_t *pmdp)
-{
-
-	if ((pmd_val(*pmdp) & _PAGE_RW) == 0)
-		return;
-
-	pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0);
-}
-
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-extern void pmdp_splitting_flush(struct vm_area_struct *vma,
-				 unsigned long address, pmd_t *pmdp);
-
-extern pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
-				 unsigned long address, pmd_t *pmdp);
-#define pmdp_collapse_flush pmdp_collapse_flush
-
-#define __HAVE_ARCH_PGTABLE_DEPOSIT
-extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				       pgtable_t pgtable);
-#define __HAVE_ARCH_PGTABLE_WITHDRAW
-extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
-
-#define __HAVE_ARCH_PMDP_INVALIDATE
-extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
-			    pmd_t *pmdp);
-
-#define pmd_move_must_withdraw pmd_move_must_withdraw
-struct spinlock;
-static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
-					 struct spinlock *old_pmd_ptl)
-{
-	/*
-	 * Archs like ppc64 use pgtable to store per pmd
-	 * specific information. So when we switch the pmd,
-	 * we should also withdraw and deposit the pgtable
-	 */
-	return true;
-}
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
+#endif /* _ASM_POWERPC_NOHASH_64_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/nohash/pgtable.h b/arch/powerpc/include/asm/nohash/pgtable.h
new file mode 100644
index 000000000000..1263c22d60d8
--- /dev/null
+++ b/arch/powerpc/include/asm/nohash/pgtable.h
@@ -0,0 +1,252 @@
+#ifndef _ASM_POWERPC_NOHASH_PGTABLE_H
+#define _ASM_POWERPC_NOHASH_PGTABLE_H
+
+#if defined(CONFIG_PPC64)
+#include <asm/nohash/64/pgtable.h>
+#else
+#include <asm/nohash/32/pgtable.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Generic accessors to PTE bits */
+static inline int pte_write(pte_t pte)
+{
+	return (pte_val(pte) & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO;
+}
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }
+static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
+static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
+
+#ifdef CONFIG_NUMA_BALANCING
+/*
+ * These work without NUMA balancing but the kernel does not care. See the
+ * comment in include/asm-generic/pgtable.h . On powerpc, this will only
+ * work for user pages and always return true for kernel pages.
+ */
+static inline int pte_protnone(pte_t pte)
+{
+	return (pte_val(pte) &
+		(_PAGE_PRESENT | _PAGE_USER)) == _PAGE_PRESENT;
+}
+
+static inline int pmd_protnone(pmd_t pmd)
+{
+	return pte_protnone(pmd_pte(pmd));
+}
+#endif /* CONFIG_NUMA_BALANCING */
+
+static inline int pte_present(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_PRESENT;
+}
+
+/* Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * Even if PTEs can be unsigned long long, a PFN is always an unsigned
+ * long for now.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) {
+	return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
+		     pgprot_val(pgprot)); }
+static inline unsigned long pte_pfn(pte_t pte)	{
+	return pte_val(pte) >> PTE_RPN_SHIFT; }
+
+/* Generic modifiers for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_basic_t ptev;
+
+	ptev = pte_val(pte) & ~(_PAGE_RW | _PAGE_HWWRITE);
+	ptev |= _PAGE_RO;
+	return __pte(ptev);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~(_PAGE_DIRTY | _PAGE_HWWRITE));
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_basic_t ptev;
+
+	ptev = pte_val(pte) & ~_PAGE_RO;
+	ptev |= _PAGE_RW;
+	return __pte(ptev);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return __pte(pte_val(pte) | _PAGE_SPECIAL);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+/* Insert a PTE, top-level function is out of line. It uses an inline
+ * low level function in the respective pgtable-* files
+ */
+extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+		       pte_t pte);
+
+/* This low level function performs the actual PTE insertion
+ * Setting the PTE depends on the MMU type and other factors. It's
+ * an horrible mess that I'm not going to try to clean up now but
+ * I'm keeping it in one place rather than spread around
+ */
+static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
+				pte_t *ptep, pte_t pte, int percpu)
+{
+#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
+	/* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
+	 * helper pte_update() which does an atomic update. We need to do that
+	 * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
+	 * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
+	 * the hash bits instead (ie, same as the non-SMP case)
+	 */
+	if (percpu)
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+	else
+		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
+
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+	/* Second case is 32-bit with 64-bit PTE.  In this case, we
+	 * can just store as long as we do the two halves in the right order
+	 * with a barrier in between. This is possible because we take care,
+	 * in the hash code, to pre-invalidate if the PTE was already hashed,
+	 * which synchronizes us with any concurrent invalidation.
+	 * In the percpu case, we also fallback to the simple update preserving
+	 * the hash bits
+	 */
+	if (percpu) {
+		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+			      | (pte_val(pte) & ~_PAGE_HASHPTE));
+		return;
+	}
+#if _PAGE_HASHPTE != 0
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(mm, ptep, addr);
+#endif
+	__asm__ __volatile__("\
+		stw%U0%X0 %2,%0\n\
+		eieio\n\
+		stw%U0%X0 %L2,%1"
+	: "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
+	: "r" (pte) : "memory");
+
+#elif defined(CONFIG_PPC_STD_MMU_32)
+	/* Third case is 32-bit hash table in UP mode, we need to preserve
+	 * the _PAGE_HASHPTE bit since we may not have invalidated the previous
+	 * translation in the hash yet (done in a subsequent flush_tlb_xxx())
+	 * and see we need to keep track that this PTE needs invalidating
+	 */
+	*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
+		      | (pte_val(pte) & ~_PAGE_HASHPTE));
+
+#else
+	/* Anything else just stores the PTE normally. That covers all 64-bit
+	 * cases, and 32-bit non-hash with 32-bit PTEs.
+	 */
+	*ptep = pte;
+
+#ifdef CONFIG_PPC_BOOK3E_64
+	/*
+	 * With hardware tablewalk, a sync is needed to ensure that
+	 * subsequent accesses see the PTE we just wrote.  Unlike userspace
+	 * mappings, we can't tolerate spurious faults, so make sure
+	 * the new PTE will be seen the first time.
+	 */
+	if (is_kernel_addr(addr))
+		mb();
+#endif
+#endif
+}
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
+				 pte_t *ptep, pte_t entry, int dirty);
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
+			 _PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot)	  (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_NO_CACHE))
+
+#define pgprot_cached(prot)       (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_COHERENT))
+
+#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+				            _PAGE_COHERENT | _PAGE_WRITETHRU))
+
+#define pgprot_cached_noncoherent(prot) \
+		(__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL))
+
+#define pgprot_writecombine pgprot_noncached_wc
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline int hugepd_ok(hugepd_t hpd)
+{
+	return (hpd.pd > 0);
+}
+
+static inline int pmd_huge(pmd_t pmd)
+{
+	return 0;
+}
+
+static inline int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
+static inline int pgd_huge(pgd_t pgd)
+{
+	return 0;
+}
+#define pgd_huge		pgd_huge
+
+#define is_hugepd(hpd)		(hugepd_ok(hpd))
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/nohash/pte-book3e.h
index 8d8473278d91..e16807b78edf 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/nohash/pte-book3e.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_POWERPC_PTE_BOOK3E_H
-#define _ASM_POWERPC_PTE_BOOK3E_H
+#ifndef _ASM_POWERPC_NOHASH_PTE_BOOK3E_H
+#define _ASM_POWERPC_NOHASH_PTE_BOOK3E_H
 #ifdef __KERNEL__
 
 /* PTE bit definitions for processors compliant to the Book3E
@@ -84,4 +84,4 @@
 #endif
 
 #endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_FSL_BOOKE_H */
+#endif /*  _ASM_POWERPC_NOHASH_PTE_BOOK3E_H */
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 8374afed9d0a..f8faaaeeca1e 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -157,7 +157,8 @@
 #define OPAL_LEDS_GET_INDICATOR			114
 #define OPAL_LEDS_SET_INDICATOR			115
 #define OPAL_CEC_REBOOT2			116
-#define OPAL_LAST				116
+#define OPAL_CONSOLE_FLUSH			117
+#define OPAL_LAST				117
 
 /* Device tree flags */
 
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 800115910e43..9d86c6651716 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -35,6 +35,7 @@ int64_t opal_console_read(int64_t term_number, __be64 *length,
 			  uint8_t *buffer);
 int64_t opal_console_write_buffer_space(int64_t term_number,
 					__be64 *length);
+int64_t opal_console_flush(int64_t term_number);
 int64_t opal_rtc_read(__be32 *year_month_day,
 		      __be64 *hour_minute_second_millisecond);
 int64_t opal_rtc_write(uint32_t year_month_day,
@@ -247,6 +248,7 @@ extern int opal_elog_init(void);
 extern void opal_platform_dump_init(void);
 extern void opal_sys_param_init(void);
 extern void opal_msglog_init(void);
+extern void opal_msglog_sysfs_init(void);
 extern int opal_async_comp_init(void);
 extern int opal_sensor_init(void);
 extern int opal_hmi_handler_init(void);
@@ -262,6 +264,8 @@ extern int opal_resync_timebase(void);
 
 extern void opal_lpc_init(void);
 
+extern void opal_kmsg_init(void);
+
 extern int opal_event_request(unsigned int opal_event_nr);
 
 struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
@@ -270,6 +274,8 @@ void opal_free_sg_list(struct opal_sg_list *sg);
 
 extern int opal_error_code(int rc);
 
+ssize_t opal_msglog_copy(char *to, loff_t pos, size_t count);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_OPAL_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 70bd4381f8e6..546540b91095 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -16,6 +16,7 @@
 
 #ifdef CONFIG_PPC64
 
+#include <linux/string.h>
 #include <asm/types.h>
 #include <asm/lppaca.h>
 #include <asm/mmu.h>
@@ -131,7 +132,16 @@ struct paca_struct {
 	struct tlb_core_data tcd;
 #endif /* CONFIG_PPC_BOOK3E */
 
-	mm_context_t context;
+#ifdef CONFIG_PPC_BOOK3S
+	mm_context_id_t mm_ctx_id;
+#ifdef CONFIG_PPC_MM_SLICES
+	u64 mm_ctx_low_slices_psize;
+	unsigned char mm_ctx_high_slices_psize[SLICE_ARRAY_SIZE];
+#else
+	u16 mm_ctx_user_psize;
+	u16 mm_ctx_sllp;
+#endif
+#endif
 
 	/*
 	 * then miscellaneous read-write fields
@@ -194,6 +204,23 @@ struct paca_struct {
 #endif
 };
 
+#ifdef CONFIG_PPC_BOOK3S
+static inline void copy_mm_to_paca(mm_context_t *context)
+{
+	get_paca()->mm_ctx_id = context->id;
+#ifdef CONFIG_PPC_MM_SLICES
+	get_paca()->mm_ctx_low_slices_psize = context->low_slices_psize;
+	memcpy(&get_paca()->mm_ctx_high_slices_psize,
+	       &context->high_slices_psize, SLICE_ARRAY_SIZE);
+#else
+	get_paca()->mm_ctx_user_psize = context->user_psize;
+	get_paca()->mm_ctx_sllp = context->sllp;
+#endif
+}
+#else
+static inline void copy_mm_to_paca(mm_context_t *context){}
+#endif
+
 extern struct paca_struct *paca;
 extern void initialise_paca(struct paca_struct *new_paca, int cpu);
 extern void setup_paca(struct paca_struct *new_paca);
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 3140c19c448c..ab3d8977bacd 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -271,6 +271,13 @@ extern long long virt_phys_offset;
 #else
 #define PD_HUGE 0x80000000
 #endif
+
+#else	/* CONFIG_PPC_BOOK3S_64 */
+/*
+ * Book3S 64 stores real addresses in the hugepd entries to
+ * avoid overlaps with _PAGE_PRESENT and _PAGE_PTE.
+ */
+#define HUGEPD_ADDR_MASK	(0x0ffffffffffffffful & ~HUGEPD_SHIFT_MASK)
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
 /*
@@ -281,127 +288,15 @@ extern long long virt_phys_offset;
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_STRICT_MM_TYPECHECKS
-/* These are used to make use of C type-checking. */
-
-/* PTE level */
-typedef struct { pte_basic_t pte; } pte_t;
-#define pte_val(x)	((x).pte)
-#define __pte(x)	((pte_t) { (x) })
-
-/* 64k pages additionally define a bigger "real PTE" type that gathers
- * the "second half" part of the PTE for pseudo 64k pages
- */
-#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
-#else
-typedef struct { pte_t pte; } real_pte_t;
-#endif
-
-/* PMD level */
-#ifdef CONFIG_PPC64
-typedef struct { unsigned long pmd; } pmd_t;
-#define pmd_val(x)	((x).pmd)
-#define __pmd(x)	((pmd_t) { (x) })
-
-/* PUD level exusts only on 4k pages */
-#ifndef CONFIG_PPC_64K_PAGES
-typedef struct { unsigned long pud; } pud_t;
-#define pud_val(x)	((x).pud)
-#define __pud(x)	((pud_t) { (x) })
-#endif /* !CONFIG_PPC_64K_PAGES */
-#endif /* CONFIG_PPC64 */
-
-/* PGD level */
-typedef struct { unsigned long pgd; } pgd_t;
-#define pgd_val(x)	((x).pgd)
-#define __pgd(x)	((pgd_t) { (x) })
-
-/* Page protection bits */
-typedef struct { unsigned long pgprot; } pgprot_t;
-#define pgprot_val(x)	((x).pgprot)
-#define __pgprot(x)	((pgprot_t) { (x) })
-
-#else
-
-/*
- * .. while these make it easier on the compiler
- */
-
-typedef pte_basic_t pte_t;
-#define pte_val(x)	(x)
-#define __pte(x)	(x)
-
-#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
-typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
-#else
-typedef pte_t real_pte_t;
-#endif
-
-
-#ifdef CONFIG_PPC64
-typedef unsigned long pmd_t;
-#define pmd_val(x)	(x)
-#define __pmd(x)	(x)
-
-#ifndef CONFIG_PPC_64K_PAGES
-typedef unsigned long pud_t;
-#define pud_val(x)	(x)
-#define __pud(x)	(x)
-#endif /* !CONFIG_PPC_64K_PAGES */
-#endif /* CONFIG_PPC64 */
-
-typedef unsigned long pgd_t;
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-
-typedef unsigned long pgprot_t;
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-
-#endif
+#include <asm/pgtable-types.h>
 
 typedef struct { signed long pd; } hugepd_t;
 
-#ifdef CONFIG_HUGETLB_PAGE
-#ifdef CONFIG_PPC_BOOK3S_64
-#ifdef CONFIG_PPC_64K_PAGES
-/*
- * With 64k page size, we have hugepage ptes in the pgd and pmd entries. We don't
- * need to setup hugepage directory for them. Our pte and page directory format
- * enable us to have this enabled. But to avoid errors when implementing new
- * features disable hugepd for 64K. We enable a debug version here, So we catch
- * wrong usage.
- */
-#ifdef CONFIG_DEBUG_VM
-extern int hugepd_ok(hugepd_t hpd);
-#else
-#define hugepd_ok(x)	(0)
-#endif
-#else
-static inline int hugepd_ok(hugepd_t hpd)
-{
-	/*
-	 * hugepd pointer, bottom two bits == 00 and next 4 bits
-	 * indicate size of table
-	 */
-	return (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
-}
-#endif
-#else
-static inline int hugepd_ok(hugepd_t hpd)
-{
-	return (hpd.pd > 0);
-}
-#endif
-
-#define is_hugepd(hpd)               (hugepd_ok(hpd))
-#define pgd_huge pgd_huge
-int pgd_huge(pgd_t pgd);
-#else /* CONFIG_HUGETLB_PAGE */
-#define is_hugepd(pdep)			0
-#define pgd_huge(pgd)			0
+#ifndef CONFIG_HUGETLB_PAGE
+#define is_hugepd(pdep)		(0)
+#define pgd_huge(pgd)		(0)
 #endif /* CONFIG_HUGETLB_PAGE */
+
 #define __hugepd(x) ((hugepd_t) { (x) })
 
 struct page;
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index 68d73b2a7bfc..6a8e1797f223 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_POWERPC_PAGE_32_H
 #define _ASM_POWERPC_PAGE_32_H
 
+#include <asm/cache.h>
+
 #if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
 #if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
 #error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
@@ -36,9 +38,18 @@ typedef unsigned long long pte_basic_t;
 typedef unsigned long pte_basic_t;
 #endif
 
-struct page;
-extern void clear_pages(void *page, int order);
-static inline void clear_page(void *page) { clear_pages(page, 0); }
+/*
+ * Clear page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ */
+static inline void clear_page(void *addr)
+{
+	unsigned int i;
+
+	for (i = 0; i < PAGE_SIZE / L1_CACHE_BYTES; i++, addr += L1_CACHE_BYTES)
+		dcbz(addr);
+}
 extern void copy_page(void *to, void *from);
 
 #include <asm-generic/getorder.h>
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 37fc53587bb4..f5056e3394b4 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -10,7 +10,6 @@
 #include <linux/pci.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
-#include <asm-generic/pci-bridge.h>
 
 struct device_node;
 
@@ -205,21 +204,23 @@ struct pci_dn {
 
 	int	pci_ext_config_space;	/* for pci devices */
 
+	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
 #ifdef CONFIG_EEH
 	struct eeh_dev *edev;		/* eeh device */
 #endif
 #define IODA_INVALID_PE		(-1)
 #ifdef CONFIG_PPC_POWERNV
 	int	pe_number;
+	int     vf_index;		/* VF index in the PF */
 #ifdef CONFIG_PCI_IOV
 	u16     vfs_expanded;		/* number of VFs IOV BAR expanded */
 	u16     num_vfs;		/* number of VFs enabled*/
-	int     offset;			/* PE# for the first VF PE */
-#define M64_PER_IOV 4
-	int     m64_per_iov;
+	int     *pe_num_map;		/* PE# for the first VF PE or array */
+	bool    m64_single_mode;	/* Use M64 BAR in Single Mode */
 #define IODA_INVALID_M64        (-1)
-	int     m64_wins[PCI_SRIOV_NUM_BARS][M64_PER_IOV];
+	int     (*m64_map)[PCI_SRIOV_NUM_BARS];
 #endif /* CONFIG_PCI_IOV */
+	int	mps;			/* Maximum Payload Size */
 #endif
 	struct list_head child_list;
 	struct list_head list;
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 3453bd8dc18f..a6f3ac0d4602 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -20,8 +20,6 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 
-#include <asm-generic/pci-dma-compat.h>
-
 /* Return values for pci_controller_ops.probe_mode function */
 #define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
 #define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
@@ -149,4 +147,8 @@ extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
 extern void pcibios_scan_phb(struct pci_controller *hose);
 
 #endif	/* __KERNEL__ */
+
+extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
+extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
+
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h
index 814622146d5a..e157489ee7a1 100644
--- a/arch/powerpc/include/asm/perf_event_server.h
+++ b/arch/powerpc/include/asm/perf_event_server.h
@@ -136,16 +136,24 @@ extern ssize_t power_events_sysfs_show(struct device *dev,
  * event 'cpu-cycles' can have two entries in sysfs: 'cpu-cycles' and
  * 'PM_CYC' where the latter is the name by which the event is known in
  * POWER CPU specification.
+ *
+ * Similarly, some hardware and cache events use the same event code. Eg.
+ * on POWER8, both "cache-references" and "L1-dcache-loads" events refer
+ * to the same event, PM_LD_REF_L1.  The suffix, allows us to have two
+ * sysfs objects for the same event and thus two entries/aliases in sysfs.
  */
 #define	EVENT_VAR(_id, _suffix)		event_attr_##_id##_suffix
 #define	EVENT_PTR(_id, _suffix)		&EVENT_VAR(_id, _suffix).attr.attr
 
 #define	EVENT_ATTR(_name, _id, _suffix)					\
-	PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), PME_##_id,	\
+	PMU_EVENT_ATTR(_name, EVENT_VAR(_id, _suffix), _id,		\
 			power_events_sysfs_show)
 
 #define	GENERIC_EVENT_ATTR(_name, _id)	EVENT_ATTR(_name, _id, _g)
 #define	GENERIC_EVENT_PTR(_id)		EVENT_PTR(_id, _g)
 
+#define	CACHE_EVENT_ATTR(_name, _id)	EVENT_ATTR(_name, _id, _c)
+#define	CACHE_EVENT_PTR(_id)		EVENT_PTR(_id, _c)
+
 #define	POWER_EVENT_ATTR(_name, _id)	EVENT_ATTR(_name, _id, _p)
 #define	POWER_EVENT_PTR(_id)		EVENT_PTR(_id, _p)
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 842846c1b711..76d6b9e0c8a9 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -21,16 +21,34 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
 /* #define pgd_populate(mm, pmd, pte)      BUG() */
 
 #ifndef CONFIG_BOOKE
-#define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp,
+				       pte_t *pte)
+{
+	*pmdp = __pmd(__pa(pte) | _PMD_PRESENT);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp,
+				pgtable_t pte_page)
+{
+	*pmdp = __pmd((page_to_pfn(pte_page) << PAGE_SHIFT) | _PMD_PRESENT);
+}
+
 #define pmd_pgtable(pmd) pmd_page(pmd)
 #else
-#define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
-#define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp,
+				       pte_t *pte)
+{
+	*pmdp = __pmd((unsigned long)pte | _PMD_PRESENT);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp,
+				pgtable_t pte_page)
+{
+	*pmdp = __pmd((unsigned long)lowmem_page_address(pte_page) | _PMD_PRESENT);
+}
+
 #define pmd_pgtable(pmd) pmd_page(pmd)
 #endif
 
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 4b0be20fcbfd..8d5fc3ac43da 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -53,7 +53,7 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 
 #ifndef CONFIG_PPC_64K_PAGES
 
-#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, PUD)
+#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, __pgtable_ptr_val(PUD))
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
@@ -68,12 +68,21 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 
 static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 {
-	pud_set(pud, (unsigned long)pmd);
+	pud_set(pud, __pgtable_ptr_val(pmd));
+}
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	pmd_set(pmd, __pgtable_ptr_val(pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				pgtable_t pte_page)
+{
+	pmd_set(pmd, __pgtable_ptr_val(page_address(pte_page)));
 }
 
-#define pmd_populate(mm, pmd, pte_page) \
-	pmd_populate_kernel(mm, pmd, page_address(pte_page))
-#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
 #define pmd_pgtable(pmd) pmd_page(pmd)
 
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
@@ -154,16 +163,6 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t table,
 }
 
 #else /* if CONFIG_PPC_64K_PAGES */
-/*
- * we support 16 fragments per PTE page.
- */
-#define PTE_FRAG_NR	16
-/*
- * We use a 2K PTE page fragment and another 2K for storing
- * real_pte_t hash index
- */
-#define PTE_FRAG_SIZE_SHIFT  12
-#define PTE_FRAG_SIZE (2 * PTRS_PER_PTE * sizeof(pte_t))
 
 extern pte_t *page_table_alloc(struct mm_struct *, unsigned long, int);
 extern void page_table_free(struct mm_struct *, unsigned long *, int);
@@ -172,23 +171,45 @@ extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift);
 extern void __tlb_remove_table(void *_table);
 #endif
 
-#define pud_populate(mm, pud, pmd)	pud_set(pud, (unsigned long)pmd)
+#ifndef __PAGETABLE_PUD_FOLDED
+/* book3s 64 is 4 level page table */
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	pgd_set(pgd, __pgtable_ptr_val(pud));
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(PGT_CACHE(PUD_INDEX_SIZE),
+				GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	kmem_cache_free(PGT_CACHE(PUD_INDEX_SIZE), pud);
+}
+#endif
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	pud_set(pud, __pgtable_ptr_val(pmd));
+}
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
 				       pte_t *pte)
 {
-	pmd_set(pmd, (unsigned long)pte);
+	pmd_set(pmd, __pgtable_ptr_val(pte));
 }
 
 static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
 				pgtable_t pte_page)
 {
-	pmd_set(pmd, (unsigned long)pte_page);
+	pmd_set(pmd, __pgtable_ptr_val(pte_page));
 }
 
 static inline pgtable_t pmd_pgtable(pmd_t pmd)
 {
-	return (pgtable_t)(pmd_val(pmd) & ~PMD_MASKED_BITS);
+	return (pgtable_t)pmd_page_vaddr(pmd);
 }
 
 static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
@@ -234,11 +255,11 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 
 #define __pmd_free_tlb(tlb, pmd, addr)		      \
 	pgtable_free_tlb(tlb, pmd, PMD_CACHE_INDEX)
-#ifndef CONFIG_PPC_64K_PAGES
+#ifndef __PAGETABLE_PUD_FOLDED
 #define __pud_free_tlb(tlb, pud, addr)		      \
 	pgtable_free_tlb(tlb, pud, PUD_INDEX_SIZE)
 
-#endif /* CONFIG_PPC_64K_PAGES */
+#endif /* __PAGETABLE_PUD_FOLDED */
 
 #define check_pgt_cache()	do { } while (0)
 
diff --git a/arch/powerpc/include/asm/pgtable-types.h b/arch/powerpc/include/asm/pgtable-types.h
new file mode 100644
index 000000000000..43140f8b0592
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-types.h
@@ -0,0 +1,103 @@
+#ifndef _ASM_POWERPC_PGTABLE_TYPES_H
+#define _ASM_POWERPC_PGTABLE_TYPES_H
+
+#ifdef CONFIG_STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking. */
+
+/* PTE level */
+typedef struct { pte_basic_t pte; } pte_t;
+#define __pte(x)	((pte_t) { (x) })
+static inline pte_basic_t pte_val(pte_t x)
+{
+	return x.pte;
+}
+
+/* PMD level */
+#ifdef CONFIG_PPC64
+typedef struct { unsigned long pmd; } pmd_t;
+#define __pmd(x)	((pmd_t) { (x) })
+static inline unsigned long pmd_val(pmd_t x)
+{
+	return x.pmd;
+}
+
+/*
+ * 64 bit hash always use 4 level table. Everybody else use 4 level
+ * only for 4K page size.
+ */
+#if defined(CONFIG_PPC_BOOK3S_64) || !defined(CONFIG_PPC_64K_PAGES)
+typedef struct { unsigned long pud; } pud_t;
+#define __pud(x)	((pud_t) { (x) })
+static inline unsigned long pud_val(pud_t x)
+{
+	return x.pud;
+}
+#endif /* CONFIG_PPC_BOOK3S_64 || !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+/* PGD level */
+typedef struct { unsigned long pgd; } pgd_t;
+#define __pgd(x)	((pgd_t) { (x) })
+static inline unsigned long pgd_val(pgd_t x)
+{
+	return x.pgd;
+}
+
+/* Page protection bits */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+#else
+
+/*
+ * .. while these make it easier on the compiler
+ */
+
+typedef pte_basic_t pte_t;
+#define __pte(x)	(x)
+static inline pte_basic_t pte_val(pte_t pte)
+{
+	return pte;
+}
+
+#ifdef CONFIG_PPC64
+typedef unsigned long pmd_t;
+#define __pmd(x)	(x)
+static inline unsigned long pmd_val(pmd_t pmd)
+{
+	return pmd;
+}
+
+#if defined(CONFIG_PPC_BOOK3S_64) || !defined(CONFIG_PPC_64K_PAGES)
+typedef unsigned long pud_t;
+#define __pud(x)	(x)
+static inline unsigned long pud_val(pud_t pud)
+{
+	return pud;
+}
+#endif /* CONFIG_PPC_BOOK3S_64 || !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+typedef unsigned long pgd_t;
+#define __pgd(x)	(x)
+static inline unsigned long pgd_val(pgd_t pgd)
+{
+	return pgd;
+}
+
+typedef unsigned long pgprot_t;
+#define pgprot_val(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif /* CONFIG_STRICT_MM_TYPECHECKS */
+/*
+ * With hash config 64k pages additionally define a bigger "real PTE" type that
+ * gathers the "second half" part of the PTE for pseudo 64k pages
+ */
+#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
+typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+#else
+typedef struct { pte_t pte; } real_pte_t;
+#endif
+#endif /* _ASM_POWERPC_PGTABLE_TYPES_H */
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index b64b4212b71f..47897a30982d 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -1,6 +1,5 @@
 #ifndef _ASM_POWERPC_PGTABLE_H
 #define _ASM_POWERPC_PGTABLE_H
-#ifdef __KERNEL__
 
 #ifndef __ASSEMBLY__
 #include <linux/mmdebug.h>
@@ -13,210 +12,20 @@ struct mm_struct;
 
 #endif /* !__ASSEMBLY__ */
 
-#if defined(CONFIG_PPC64)
-#  include <asm/pgtable-ppc64.h>
+#ifdef CONFIG_PPC_BOOK3S
+#include <asm/book3s/pgtable.h>
 #else
-#  include <asm/pgtable-ppc32.h>
-#endif
-
-/*
- * We save the slot number & secondary bit in the second half of the
- * PTE page. We use the 8 bytes per each pte entry.
- */
-#define PTE_PAGE_HIDX_OFFSET (PTRS_PER_PTE * 8)
+#include <asm/nohash/pgtable.h>
+#endif /* !CONFIG_PPC_BOOK3S */
 
 #ifndef __ASSEMBLY__
 
 #include <asm/tlbflush.h>
 
-/* Generic accessors to PTE bits */
-static inline int pte_write(pte_t pte)
-{	return (pte_val(pte) & (_PAGE_RW | _PAGE_RO)) != _PAGE_RO; }
-static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }
-static inline int pte_none(pte_t pte)		{ return (pte_val(pte) & ~_PTE_NONE_MASK) == 0; }
-static inline pgprot_t pte_pgprot(pte_t pte)	{ return __pgprot(pte_val(pte) & PAGE_PROT_BITS); }
-
-#ifdef CONFIG_NUMA_BALANCING
-/*
- * These work without NUMA balancing but the kernel does not care. See the
- * comment in include/asm-generic/pgtable.h . On powerpc, this will only
- * work for user pages and always return true for kernel pages.
- */
-static inline int pte_protnone(pte_t pte)
-{
-	return (pte_val(pte) &
-		(_PAGE_PRESENT | _PAGE_USER)) == _PAGE_PRESENT;
-}
-
-static inline int pmd_protnone(pmd_t pmd)
-{
-	return pte_protnone(pmd_pte(pmd));
-}
-#endif /* CONFIG_NUMA_BALANCING */
-
-static inline int pte_present(pte_t pte)
-{
-	return pte_val(pte) & _PAGE_PRESENT;
-}
-
-/* Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- *
- * Even if PTEs can be unsigned long long, a PFN is always an unsigned
- * long for now.
- */
-static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot) {
-	return __pte(((pte_basic_t)(pfn) << PTE_RPN_SHIFT) |
-		     pgprot_val(pgprot)); }
-static inline unsigned long pte_pfn(pte_t pte)	{
-	return pte_val(pte) >> PTE_RPN_SHIFT; }
-
 /* Keep these as a macros to avoid include dependency mess */
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
 #define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
 
-/* Generic modifiers for PTE bits */
-static inline pte_t pte_wrprotect(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE);
-	pte_val(pte) |= _PAGE_RO; return pte; }
-static inline pte_t pte_mkclean(pte_t pte) {
-	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
-static inline pte_t pte_mkold(pte_t pte) {
-	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) {
-	pte_val(pte) &= ~_PAGE_RO;
-	pte_val(pte) |= _PAGE_RW; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) {
-	pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) {
-	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) {
-	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
-static inline pte_t pte_mkhuge(pte_t pte) {
-	return pte; }
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
-	return pte;
-}
-
-
-/* Insert a PTE, top-level function is out of line. It uses an inline
- * low level function in the respective pgtable-* files
- */
-extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
-		       pte_t pte);
-
-/* This low level function performs the actual PTE insertion
- * Setting the PTE depends on the MMU type and other factors. It's
- * an horrible mess that I'm not going to try to clean up now but
- * I'm keeping it in one place rather than spread around
- */
-static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
-				pte_t *ptep, pte_t pte, int percpu)
-{
-#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT)
-	/* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the
-	 * helper pte_update() which does an atomic update. We need to do that
-	 * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a
-	 * per-CPU PTE such as a kmap_atomic, we do a simple update preserving
-	 * the hash bits instead (ie, same as the non-SMP case)
-	 */
-	if (percpu)
-		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
-			      | (pte_val(pte) & ~_PAGE_HASHPTE));
-	else
-		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
-
-#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
-	/* Second case is 32-bit with 64-bit PTE.  In this case, we
-	 * can just store as long as we do the two halves in the right order
-	 * with a barrier in between. This is possible because we take care,
-	 * in the hash code, to pre-invalidate if the PTE was already hashed,
-	 * which synchronizes us with any concurrent invalidation.
-	 * In the percpu case, we also fallback to the simple update preserving
-	 * the hash bits
-	 */
-	if (percpu) {
-		*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
-			      | (pte_val(pte) & ~_PAGE_HASHPTE));
-		return;
-	}
-#if _PAGE_HASHPTE != 0
-	if (pte_val(*ptep) & _PAGE_HASHPTE)
-		flush_hash_entry(mm, ptep, addr);
-#endif
-	__asm__ __volatile__("\
-		stw%U0%X0 %2,%0\n\
-		eieio\n\
-		stw%U0%X0 %L2,%1"
-	: "=m" (*ptep), "=m" (*((unsigned char *)ptep+4))
-	: "r" (pte) : "memory");
-
-#elif defined(CONFIG_PPC_STD_MMU_32)
-	/* Third case is 32-bit hash table in UP mode, we need to preserve
-	 * the _PAGE_HASHPTE bit since we may not have invalidated the previous
-	 * translation in the hash yet (done in a subsequent flush_tlb_xxx())
-	 * and see we need to keep track that this PTE needs invalidating
-	 */
-	*ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE)
-		      | (pte_val(pte) & ~_PAGE_HASHPTE));
-
-#else
-	/* Anything else just stores the PTE normally. That covers all 64-bit
-	 * cases, and 32-bit non-hash with 32-bit PTEs.
-	 */
-	*ptep = pte;
-
-#ifdef CONFIG_PPC_BOOK3E_64
-	/*
-	 * With hardware tablewalk, a sync is needed to ensure that
-	 * subsequent accesses see the PTE we just wrote.  Unlike userspace
-	 * mappings, we can't tolerate spurious faults, so make sure
-	 * the new PTE will be seen the first time.
-	 */
-	if (is_kernel_addr(addr))
-		mb();
-#endif
-#endif
-}
-
-
-#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
-extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
-				 pte_t *ptep, pte_t entry, int dirty);
-
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-
-#define _PAGE_CACHE_CTL	(_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
-			 _PAGE_WRITETHRU)
-
-#define pgprot_noncached(prot)	  (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-#define pgprot_noncached_wc(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_NO_CACHE))
-
-#define pgprot_cached(prot)       (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_COHERENT))
-
-#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
-				            _PAGE_COHERENT | _PAGE_WRITETHRU))
-
-#define pgprot_cached_noncoherent(prot) \
-		(__pgprot(pgprot_val(prot) & ~_PAGE_CACHE_CTL))
-
-#define pgprot_writecombine pgprot_noncached_wc
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-				     unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -269,7 +78,9 @@ static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
 	}
 	return __find_linux_pte_or_hugepte(pgdir, ea, is_thp, shift);
 }
+
+unsigned long vmalloc_to_phys(void *vmalloc_addr);
+
 #endif /* __ASSEMBLY__ */
 
-#endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 67859edbf8fd..1b394247afc2 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -202,6 +202,23 @@ static inline long plpar_pte_read_raw(unsigned long flags, unsigned long ptex,
 }
 
 /*
+ * ptes must be 8*sizeof(unsigned long)
+ */
+static inline long plpar_pte_read_4(unsigned long flags, unsigned long ptex,
+				    unsigned long *ptes)
+
+{
+	long rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_READ, retbuf, flags | H_READ_4, ptex);
+
+	memcpy(ptes, retbuf, 8*sizeof(unsigned long));
+
+	return rc;
+}
+
+/*
  * plpar_pte_read_4_raw can be called in real mode.
  * ptes must be 8*sizeof(unsigned long)
  */
diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
index 10902c9375d0..925697968946 100644
--- a/arch/powerpc/include/asm/pmac_feature.h
+++ b/arch/powerpc/include/asm/pmac_feature.h
@@ -46,7 +46,7 @@
 
 /* PowerSurge are the first generation of PCI Pmacs. This include
  * all of the Grand-Central based machines. We currently don't
- * differenciate most of them.
+ * differentiate most of them.
  */
 #define PMAC_TYPE_PSURGE		0x10	/* PowerSurge */
 #define PMAC_TYPE_ANS			0x11	/* Apple Network Server */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index dd0fc18d8103..499d9f89435a 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -413,24 +413,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 	FTR_SECTION_ELSE_NESTED(848);	\
 	mtocrf (FXM), RS;		\
 	ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_NOEXECUTE, 848)
-
-/*
- * PPR restore macros used in entry_64.S
- * Used for P7 or later processors
- */
-#define HMT_MEDIUM_LOW_HAS_PPR						\
-BEGIN_FTR_SECTION_NESTED(944)						\
-	HMT_MEDIUM_LOW;							\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,944)
-
-#define SET_DEFAULT_THREAD_PPR(ra, rb)					\
-BEGIN_FTR_SECTION_NESTED(945)						\
-	lis	ra,INIT_PPR@highest;	/* default ppr=3 */		\
-	ld	rb,PACACURRENT(r13);					\
-	sldi	ra,ra,32;	/* 11- 13 bits are used for ppr */	\
-	std	ra,TASKTHREADPPR(rb);					\
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,945)
-
 #endif
 
 /*
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 5afea361beaa..009fab130cd8 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -88,12 +88,6 @@ struct task_struct;
 void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
 void release_thread(struct task_struct *);
 
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-extern struct task_struct *last_task_used_vsx;
-extern struct task_struct *last_task_used_spe;
-
 #ifdef CONFIG_PPC32
 
 #if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
@@ -242,7 +236,9 @@ struct thread_struct {
 #endif
 	struct arch_hw_breakpoint hw_brk; /* info on the hardware breakpoint */
 	unsigned long	trap_nr;	/* last trap # on this thread */
+	u8 load_fp;
 #ifdef CONFIG_ALTIVEC
+	u8 load_vec;
 	struct thread_vr_state vr_state;
 	struct thread_vr_state *vr_save_area;
 	unsigned long	vrsave;
@@ -250,7 +246,7 @@ struct thread_struct {
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_VSX
 	/* VSR status */
-	int		used_vsr;	/* set if process has used altivec */
+	int		used_vsr;	/* set if process has used VSX */
 #endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	unsigned long	evr[32];	/* upper 32-bits of SPE regs */
@@ -294,6 +290,7 @@ struct thread_struct {
 #endif
 #ifdef CONFIG_PPC64
 	unsigned long	dscr;
+	unsigned long	fscr;
 	/*
 	 * This member element dscr_inherit indicates that the process
 	 * has explicitly attempted and changed the DSCR register value
@@ -385,8 +382,6 @@ extern int set_endian(struct task_struct *tsk, unsigned int val);
 extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
 extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
 
-extern void fp_enable(void);
-extern void vec_enable(void);
 extern void load_fp_state(struct thread_fp_state *fp);
 extern void store_fp_state(struct thread_fp_state *fp);
 extern void load_vr_state(struct thread_vr_state *vr);
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index 71537a319fc8..1ec67b043065 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -40,6 +40,11 @@
 #else
 #define _PAGE_RW 0
 #endif
+
+#ifndef _PAGE_PTE
+#define _PAGE_PTE 0
+#endif
+
 #ifndef _PMD_PRESENT_MASK
 #define _PMD_PRESENT_MASK	_PMD_PRESENT
 #endif
diff --git a/arch/powerpc/include/asm/pte-hash64-4k.h b/arch/powerpc/include/asm/pte-hash64-4k.h
deleted file mode 100644
index c134e809aac3..000000000000
--- a/arch/powerpc/include/asm/pte-hash64-4k.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* To be include by pgtable-hash64.h only */
-
-/* PTE bits */
-#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
-#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
-#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
-#define _PAGE_F_SECOND  _PAGE_SECONDARY
-#define _PAGE_F_GIX     _PAGE_GROUP_IX
-#define _PAGE_SPECIAL	0x10000 /* software: special page */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
-			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
-
-/* shift to put page number into pte */
-#define PTE_RPN_SHIFT	(17)
-
diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h
deleted file mode 100644
index 4f4ec2ab45c9..000000000000
--- a/arch/powerpc/include/asm/pte-hash64-64k.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* To be include by pgtable-hash64.h only */
-
-/* Additional PTE bits (don't change without checking asm in hash_low.S) */
-#define _PAGE_SPECIAL	0x00000400 /* software: special page */
-#define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
-#define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
-#define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
-#define _PAGE_4K_PFN	0x20000000 /* PFN is for a single 4k page */
-
-/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
- * we set that to be the whole sub-bits mask. The C code will only
- * test this, so a multi-bit mask will work. For combo pages, this
- * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
- * all the sub bits. For real 64k pages, we now have the assembly set
- * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
- * that mask. This is fine as long as the HIDX bits are never set on
- * a PTE that isn't hashed, which is the case today.
- *
- * A little nit is for the huge page C code, which does the hashing
- * in C, we need to provide which bit to use.
- */
-#define _PAGE_HASHPTE	_PAGE_HPTE_SUB
-
-/* Note the full page bits must be in the same location as for normal
- * 4k pages as the same assembly will be used to insert 64K pages
- * whether the kernel has CONFIG_PPC_64K_PAGES or not
- */
-#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
-#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
-
-/* PTE flags to conserve for HPTE identification */
-#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
-
-/* Shift to put page number into pte.
- *
- * That gives us a max RPN of 34 bits, which means a max of 50 bits
- * of addressable physical space, or 46 bits for the special 4k PFNs.
- */
-#define PTE_RPN_SHIFT	(30)
-
-#ifndef __ASSEMBLY__
-
-/*
- * With 64K pages on hash table, we have a special PTE format that
- * uses a second "half" of the page table to encode sub-page information
- * in order to deal with 64K made of 4K HW pages. Thus we override the
- * generic accessors and iterators here
- */
-#define __real_pte __real_pte
-static inline real_pte_t __real_pte(pte_t pte, pte_t *ptep)
-{
-	real_pte_t rpte;
-
-	rpte.pte = pte;
-	rpte.hidx = 0;
-	if (pte_val(pte) & _PAGE_COMBO) {
-		/*
-		 * Make sure we order the hidx load against the _PAGE_COMBO
-		 * check. The store side ordering is done in __hash_page_4K
-		 */
-		smp_rmb();
-		rpte.hidx = pte_val(*((ptep) + PTRS_PER_PTE));
-	}
-	return rpte;
-}
-
-static inline unsigned long __rpte_to_hidx(real_pte_t rpte, unsigned long index)
-{
-	if ((pte_val(rpte.pte) & _PAGE_COMBO))
-		return (rpte.hidx >> (index<<2)) & 0xf;
-	return (pte_val(rpte.pte) >> 12) & 0xf;
-}
-
-#define __rpte_to_pte(r)	((r).pte)
-#define __rpte_sub_valid(rpte, index) \
-	(pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
-
-/* Trick: we set __end to va + 64k, which happens works for
- * a 16M page as well as we want only one iteration
- */
-#define pte_iterate_hashed_subpages(rpte, psize, vpn, index, shift)	\
-	do {								\
-		unsigned long __end = vpn + (1UL << (PAGE_SHIFT - VPN_SHIFT));	\
-		unsigned __split = (psize == MMU_PAGE_4K ||		\
-				    psize == MMU_PAGE_64K_AP);		\
-		shift = mmu_psize_defs[psize].shift;			\
-		for (index = 0; vpn < __end; index++,			\
-			     vpn += (1L << (shift - VPN_SHIFT))) {	\
-			if (!__split || __rpte_sub_valid(rpte, index))	\
-				do {
-
-#define pte_iterate_hashed_end() } while(0); } } while(0)
-
-#define pte_pagesize_index(mm, addr, pte)	\
-	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
-
-#define remap_4k_pfn(vma, addr, pfn, prot)				\
-	(WARN_ON(((pfn) >= (1UL << (64 - PTE_RPN_SHIFT)))) ? -EINVAL :	\
-		remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,	\
-			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)))
-
-#endif	/* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/pte-hash64.h b/arch/powerpc/include/asm/pte-hash64.h
deleted file mode 100644
index ef612c160da7..000000000000
--- a/arch/powerpc/include/asm/pte-hash64.h
+++ /dev/null
@@ -1,54 +0,0 @@
-#ifndef _ASM_POWERPC_PTE_HASH64_H
-#define _ASM_POWERPC_PTE_HASH64_H
-#ifdef __KERNEL__
-
-/*
- * Common bits between 4K and 64K pages in a linux-style PTE.
- * These match the bits in the (hardware-defined) PowerPC PTE as closely
- * as possible. Additional bits may be defined in pgtable-hash64-*.h
- *
- * Note: We only support user read/write permissions. Supervisor always
- * have full read/write to pages above PAGE_OFFSET (pages below that
- * always use the user access permissions).
- *
- * We could create separate kernel read-only if we used the 3 PP bits
- * combinations that newer processors provide but we currently don't.
- */
-#define _PAGE_PRESENT		0x0001 /* software: pte contains a translation */
-#define _PAGE_USER		0x0002 /* matches one of the PP bits */
-#define _PAGE_BIT_SWAP_TYPE	2
-#define _PAGE_EXEC		0x0004 /* No execute on POWER4 and newer (we invert) */
-#define _PAGE_GUARDED		0x0008
-/* We can derive Memory coherence from _PAGE_NO_CACHE */
-#define _PAGE_NO_CACHE		0x0020 /* I: cache inhibit */
-#define _PAGE_WRITETHRU		0x0040 /* W: cache write-through */
-#define _PAGE_DIRTY		0x0080 /* C: page changed */
-#define _PAGE_ACCESSED		0x0100 /* R: page referenced */
-#define _PAGE_RW		0x0200 /* software: user write access allowed */
-#define _PAGE_BUSY		0x0800 /* software: PTE & hash are busy */
-
-/* No separate kernel read-only */
-#define _PAGE_KERNEL_RW		(_PAGE_RW | _PAGE_DIRTY) /* user access blocked by key */
-#define _PAGE_KERNEL_RO		 _PAGE_KERNEL_RW
-
-/* Strong Access Ordering */
-#define _PAGE_SAO		(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
-
-/* No page size encoding in the linux PTE */
-#define _PAGE_PSIZE		0
-
-/* PTEIDX nibble */
-#define _PTEIDX_SECONDARY	0x8
-#define _PTEIDX_GROUP_IX	0x7
-
-/* Hash table based platforms need atomic updates of the linux PTE */
-#define PTE_ATOMIC_UPDATES	1
-
-#ifdef CONFIG_PPC_64K_PAGES
-#include <asm/pte-hash64-64k.h>
-#else
-#include <asm/pte-hash64-4k.h>
-#endif
-
-#endif /* __KERNEL__ */
-#endif /*  _ASM_POWERPC_PTE_HASH64_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
deleted file mode 100644
index 32b9bfa0c9bd..000000000000
--- a/arch/powerpc/include/asm/qe.h
+++ /dev/null
@@ -1,740 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QUICC Engine (QE) external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_H
-#define _ASM_POWERPC_QE_H
-#ifdef __KERNEL__
-
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <asm/cpm.h>
-#include <asm/immap_qe.h>
-
-#define QE_NUM_OF_SNUM	256	/* There are 256 serial number in QE */
-#define QE_NUM_OF_BRGS	16
-#define QE_NUM_OF_PORTS	1024
-
-/* Memory partitions
-*/
-#define MEM_PART_SYSTEM		0
-#define MEM_PART_SECONDARY	1
-#define MEM_PART_MURAM		2
-
-/* Clocks and BRGs */
-enum qe_clock {
-	QE_CLK_NONE = 0,
-	QE_BRG1,		/* Baud Rate Generator 1 */
-	QE_BRG2,		/* Baud Rate Generator 2 */
-	QE_BRG3,		/* Baud Rate Generator 3 */
-	QE_BRG4,		/* Baud Rate Generator 4 */
-	QE_BRG5,		/* Baud Rate Generator 5 */
-	QE_BRG6,		/* Baud Rate Generator 6 */
-	QE_BRG7,		/* Baud Rate Generator 7 */
-	QE_BRG8,		/* Baud Rate Generator 8 */
-	QE_BRG9,		/* Baud Rate Generator 9 */
-	QE_BRG10,		/* Baud Rate Generator 10 */
-	QE_BRG11,		/* Baud Rate Generator 11 */
-	QE_BRG12,		/* Baud Rate Generator 12 */
-	QE_BRG13,		/* Baud Rate Generator 13 */
-	QE_BRG14,		/* Baud Rate Generator 14 */
-	QE_BRG15,		/* Baud Rate Generator 15 */
-	QE_BRG16,		/* Baud Rate Generator 16 */
-	QE_CLK1,		/* Clock 1 */
-	QE_CLK2,		/* Clock 2 */
-	QE_CLK3,		/* Clock 3 */
-	QE_CLK4,		/* Clock 4 */
-	QE_CLK5,		/* Clock 5 */
-	QE_CLK6,		/* Clock 6 */
-	QE_CLK7,		/* Clock 7 */
-	QE_CLK8,		/* Clock 8 */
-	QE_CLK9,		/* Clock 9 */
-	QE_CLK10,		/* Clock 10 */
-	QE_CLK11,		/* Clock 11 */
-	QE_CLK12,		/* Clock 12 */
-	QE_CLK13,		/* Clock 13 */
-	QE_CLK14,		/* Clock 14 */
-	QE_CLK15,		/* Clock 15 */
-	QE_CLK16,		/* Clock 16 */
-	QE_CLK17,		/* Clock 17 */
-	QE_CLK18,		/* Clock 18 */
-	QE_CLK19,		/* Clock 19 */
-	QE_CLK20,		/* Clock 20 */
-	QE_CLK21,		/* Clock 21 */
-	QE_CLK22,		/* Clock 22 */
-	QE_CLK23,		/* Clock 23 */
-	QE_CLK24,		/* Clock 24 */
-	QE_CLK_DUMMY
-};
-
-static inline bool qe_clock_is_brg(enum qe_clock clk)
-{
-	return clk >= QE_BRG1 && clk <= QE_BRG16;
-}
-
-extern spinlock_t cmxgcr_lock;
-
-/* Export QE common operations */
-#ifdef CONFIG_QUICC_ENGINE
-extern void qe_reset(void);
-#else
-static inline void qe_reset(void) {}
-#endif
-
-/* QE PIO */
-#define QE_PIO_PINS 32
-
-struct qe_pio_regs {
-	__be32	cpodr;		/* Open drain register */
-	__be32	cpdata;		/* Data register */
-	__be32	cpdir1;		/* Direction register */
-	__be32	cpdir2;		/* Direction register */
-	__be32	cppar1;		/* Pin assignment register */
-	__be32	cppar2;		/* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
-	u8	pad[8];
-#endif
-};
-
-#define QE_PIO_DIR_IN	2
-#define QE_PIO_DIR_OUT	1
-extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
-				int dir, int open_drain, int assignment,
-				int has_irq);
-#ifdef CONFIG_QUICC_ENGINE
-extern int par_io_init(struct device_node *np);
-extern int par_io_of_config(struct device_node *np);
-extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-			     int assignment, int has_irq);
-extern int par_io_data_set(u8 port, u8 pin, u8 val);
-#else
-static inline int par_io_init(struct device_node *np) { return -ENOSYS; }
-static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; }
-static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-		int assignment, int has_irq) { return -ENOSYS; }
-static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; }
-#endif /* CONFIG_QUICC_ENGINE */
-
-/*
- * Pin multiplexing functions.
- */
-struct qe_pin;
-#ifdef CONFIG_QE_GPIO
-extern struct qe_pin *qe_pin_request(struct device_node *np, int index);
-extern void qe_pin_free(struct qe_pin *qe_pin);
-extern void qe_pin_set_gpio(struct qe_pin *qe_pin);
-extern void qe_pin_set_dedicated(struct qe_pin *pin);
-#else
-static inline struct qe_pin *qe_pin_request(struct device_node *np, int index)
-{
-	return ERR_PTR(-ENOSYS);
-}
-static inline void qe_pin_free(struct qe_pin *qe_pin) {}
-static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {}
-static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
-#endif /* CONFIG_QE_GPIO */
-
-#ifdef CONFIG_QUICC_ENGINE
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-#else
-static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
-			       u32 cmd_input)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
-/* QE internal API */
-enum qe_clock qe_clock_source(const char *source);
-unsigned int qe_get_brg_clk(void);
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
-int qe_get_snum(void);
-void qe_put_snum(u8 snum);
-unsigned int qe_get_num_of_risc(void);
-unsigned int qe_get_num_of_snums(void);
-
-static inline int qe_alive_during_sleep(void)
-{
-	/*
-	 * MPC8568E reference manual says:
-	 *
-	 * "...power down sequence waits for all I/O interfaces to become idle.
-	 *  In some applications this may happen eventually without actively
-	 *  shutting down interfaces, but most likely, software will have to
-	 *  take steps to shut down the eTSEC, QUICC Engine Block, and PCI
-	 *  interfaces before issuing the command (either the write to the core
-	 *  MSR[WE] as described above or writing to POWMGTCSR) to put the
-	 *  device into sleep state."
-	 *
-	 * MPC8569E reference manual has a similar paragraph.
-	 */
-#ifdef CONFIG_PPC_85xx
-	return 0;
-#else
-	return 1;
-#endif
-}
-
-/* we actually use cpm_muram implementation, define this for convenience */
-#define qe_muram_init cpm_muram_init
-#define qe_muram_alloc cpm_muram_alloc
-#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
-#define qe_muram_free cpm_muram_free
-#define qe_muram_addr cpm_muram_addr
-#define qe_muram_offset cpm_muram_offset
-
-/* Structure that defines QE firmware binary files.
- *
- * See Documentation/powerpc/qe_firmware.txt for a description of these
- * fields.
- */
-struct qe_firmware {
-	struct qe_header {
-		__be32 length;  /* Length of the entire structure, in bytes */
-		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
-		u8 version;     /* Version of this layout. First ver is '1' */
-	} header;
-	u8 id[62];      /* Null-terminated identifier string */
-	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
-	u8 count;       /* Number of microcode[] structures */
-	struct {
-		__be16 model;   	/* The SOC model  */
-		u8 major;       	/* The SOC revision major */
-		u8 minor;       	/* The SOC revision minor */
-	} __attribute__ ((packed)) soc;
-	u8 padding[4];			/* Reserved, for alignment */
-	__be64 extended_modes;		/* Extended modes */
-	__be32 vtraps[8];		/* Virtual trap addresses */
-	u8 reserved[4];			/* Reserved, for future expansion */
-	struct qe_microcode {
-		u8 id[32];      	/* Null-terminated identifier */
-		__be32 traps[16];       /* Trap addresses, 0 == ignore */
-		__be32 eccr;    	/* The value for the ECCR register */
-		__be32 iram_offset;     /* Offset into I-RAM for the code */
-		__be32 count;   	/* Number of 32-bit words of the code */
-		__be32 code_offset;     /* Offset of the actual microcode */
-		u8 major;       	/* The microcode version major */
-		u8 minor;       	/* The microcode version minor */
-		u8 revision;		/* The microcode version revision */
-		u8 padding;		/* Reserved, for alignment */
-		u8 reserved[4];		/* Reserved, for future expansion */
-	} __attribute__ ((packed)) microcode[1];
-	/* All microcode binaries should be located here */
-	/* CRC32 should be located here, after the microcode binaries */
-} __attribute__ ((packed));
-
-struct qe_firmware_info {
-	char id[64];		/* Firmware name */
-	u32 vtraps[8];		/* Virtual trap addresses */
-	u64 extended_modes;	/* Extended modes */
-};
-
-#ifdef CONFIG_QUICC_ENGINE
-/* Upload a firmware to the QE */
-int qe_upload_firmware(const struct qe_firmware *firmware);
-#else
-static inline int qe_upload_firmware(const struct qe_firmware *firmware)
-{
-	return -ENOSYS;
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
-/* Obtain information on the uploaded firmware */
-struct qe_firmware_info *qe_get_firmware_info(void);
-
-/* QE USB */
-int qe_usb_clock_set(enum qe_clock clk, int rate);
-
-/* Buffer descriptors */
-struct qe_bd {
-	__be16 status;
-	__be16 length;
-	__be32 buf;
-} __attribute__ ((packed));
-
-#define BD_STATUS_MASK	0xffff0000
-#define BD_LENGTH_MASK	0x0000ffff
-
-/* Alignment */
-#define QE_INTR_TABLE_ALIGN	16	/* ??? */
-#define QE_ALIGNMENT_OF_BD	8
-#define QE_ALIGNMENT_OF_PRAM	64
-
-/* RISC allocation */
-#define QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
-#define QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
-#define QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
-#define QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
-#define QE_RISC_ALLOCATION_RISC1_AND_RISC2	(QE_RISC_ALLOCATION_RISC1 | \
-						 QE_RISC_ALLOCATION_RISC2)
-#define QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
-					 QE_RISC_ALLOCATION_RISC2 | \
-					 QE_RISC_ALLOCATION_RISC3 | \
-					 QE_RISC_ALLOCATION_RISC4)
-
-/* QE extended filtering Table Lookup Key Size */
-enum qe_fltr_tbl_lookup_key_size {
-	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
-				   CMD is truncated to 8 bytes */
-	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
-				   CMD is truncated to 16 bytes */
-};
-
-/* QE FLTR extended filtering Largest External Table Lookup Key Size */
-enum qe_fltr_largest_external_tbl_lookup_key_size {
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
-		= 0x0,/* not used */
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
-		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
-	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
-		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
-};
-
-/* structure representing QE parameter RAM */
-struct qe_timer_tables {
-	u16 tm_base;		/* QE timer table base adr */
-	u16 tm_ptr;		/* QE timer table pointer */
-	u16 r_tmr;		/* QE timer mode register */
-	u16 r_tmv;		/* QE timer valid register */
-	u32 tm_cmd;		/* QE timer cmd register */
-	u32 tm_cnt;		/* QE timer internal cnt */
-} __attribute__ ((packed));
-
-#define QE_FLTR_TAD_SIZE	8
-
-/* QE extended filtering Termination Action Descriptor (TAD) */
-struct qe_fltr_tad {
-	u8 serialized[QE_FLTR_TAD_SIZE];
-} __attribute__ ((packed));
-
-/* Communication Direction */
-enum comm_dir {
-	COMM_DIR_NONE = 0,
-	COMM_DIR_RX = 1,
-	COMM_DIR_TX = 2,
-	COMM_DIR_RX_AND_TX = 3
-};
-
-/* QE CMXUCR Registers.
- * There are two UCCs represented in each of the four CMXUCR registers.
- * These values are for the UCC in the LSBs
- */
-#define QE_CMXUCR_MII_ENET_MNG		0x00007000
-#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
-#define QE_CMXUCR_GRANT			0x00008000
-#define QE_CMXUCR_TSA			0x00004000
-#define QE_CMXUCR_BKPT			0x00000100
-#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
-
-/* QE CMXGCR Registers.
-*/
-#define QE_CMXGCR_MII_ENET_MNG		0x00007000
-#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
-#define QE_CMXGCR_USBCS			0x0000000f
-#define QE_CMXGCR_USBCS_CLK3		0x1
-#define QE_CMXGCR_USBCS_CLK5		0x2
-#define QE_CMXGCR_USBCS_CLK7		0x3
-#define QE_CMXGCR_USBCS_CLK9		0x4
-#define QE_CMXGCR_USBCS_CLK13		0x5
-#define QE_CMXGCR_USBCS_CLK17		0x6
-#define QE_CMXGCR_USBCS_CLK19		0x7
-#define QE_CMXGCR_USBCS_CLK21		0x8
-#define QE_CMXGCR_USBCS_BRG9		0x9
-#define QE_CMXGCR_USBCS_BRG10		0xa
-
-/* QE CECR Commands.
-*/
-#define QE_CR_FLG			0x00010000
-#define QE_RESET			0x80000000
-#define QE_INIT_TX_RX			0x00000000
-#define QE_INIT_RX			0x00000001
-#define QE_INIT_TX			0x00000002
-#define QE_ENTER_HUNT_MODE		0x00000003
-#define QE_STOP_TX			0x00000004
-#define QE_GRACEFUL_STOP_TX		0x00000005
-#define QE_RESTART_TX			0x00000006
-#define QE_CLOSE_RX_BD			0x00000007
-#define QE_SWITCH_COMMAND		0x00000007
-#define QE_SET_GROUP_ADDRESS		0x00000008
-#define QE_START_IDMA			0x00000009
-#define QE_MCC_STOP_RX			0x00000009
-#define QE_ATM_TRANSMIT			0x0000000a
-#define QE_HPAC_CLEAR_ALL		0x0000000b
-#define QE_GRACEFUL_STOP_RX		0x0000001a
-#define QE_RESTART_RX			0x0000001b
-#define QE_HPAC_SET_PRIORITY		0x0000010b
-#define QE_HPAC_STOP_TX			0x0000020b
-#define QE_HPAC_STOP_RX			0x0000030b
-#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
-#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
-#define QE_HPAC_START_TX		0x0000060b
-#define QE_HPAC_START_RX		0x0000070b
-#define QE_USB_STOP_TX			0x0000000a
-#define QE_USB_RESTART_TX		0x0000000c
-#define QE_QMC_STOP_TX			0x0000000c
-#define QE_QMC_STOP_RX			0x0000000d
-#define QE_SS7_SU_FIL_RESET		0x0000000e
-/* jonathbr added from here down for 83xx */
-#define QE_RESET_BCS			0x0000000a
-#define QE_MCC_INIT_TX_RX_16		0x00000003
-#define QE_MCC_STOP_TX			0x00000004
-#define QE_MCC_INIT_TX_1		0x00000005
-#define QE_MCC_INIT_RX_1		0x00000006
-#define QE_MCC_RESET			0x00000007
-#define QE_SET_TIMER			0x00000008
-#define QE_RANDOM_NUMBER		0x0000000c
-#define QE_ATM_MULTI_THREAD_INIT	0x00000011
-#define QE_ASSIGN_PAGE			0x00000012
-#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
-#define QE_START_FLOW_CONTROL		0x00000014
-#define QE_STOP_FLOW_CONTROL		0x00000015
-#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
-
-#define QE_ASSIGN_RISC			0x00000010
-#define QE_CR_MCN_NORMAL_SHIFT		6
-#define QE_CR_MCN_USB_SHIFT		4
-#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
-#define QE_CR_SNUM_SHIFT		17
-
-/* QE CECR Sub Block - sub block of QE command.
-*/
-#define QE_CR_SUBBLOCK_INVALID		0x00000000
-#define QE_CR_SUBBLOCK_USB		0x03200000
-#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
-#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
-#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
-#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
-#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
-#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
-#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
-#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
-#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
-#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
-#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
-#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
-#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
-#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
-#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
-#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
-#define QE_CR_SUBBLOCK_MCC1		0x03800000
-#define QE_CR_SUBBLOCK_MCC2		0x03a00000
-#define QE_CR_SUBBLOCK_MCC3		0x03000000
-#define QE_CR_SUBBLOCK_IDMA1		0x02800000
-#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
-#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
-#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
-#define QE_CR_SUBBLOCK_HPAC		0x01e00000
-#define QE_CR_SUBBLOCK_SPI1		0x01400000
-#define QE_CR_SUBBLOCK_SPI2		0x01600000
-#define QE_CR_SUBBLOCK_RAND		0x01c00000
-#define QE_CR_SUBBLOCK_TIMER		0x01e00000
-#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
-
-/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
-#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
-#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
-#define QE_CR_PROTOCOL_QMC		0x02
-#define QE_CR_PROTOCOL_UART		0x04
-#define QE_CR_PROTOCOL_ATM_POS		0x0A
-#define QE_CR_PROTOCOL_ETHERNET		0x0C
-#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
-
-/* BRG configuration register */
-#define QE_BRGC_ENABLE		0x00010000
-#define QE_BRGC_DIVISOR_SHIFT	1
-#define QE_BRGC_DIVISOR_MAX	0xFFF
-#define QE_BRGC_DIV16		1
-
-/* QE Timers registers */
-#define QE_GTCFR1_PCAS	0x80
-#define QE_GTCFR1_STP2	0x20
-#define QE_GTCFR1_RST2	0x10
-#define QE_GTCFR1_GM2	0x08
-#define QE_GTCFR1_GM1	0x04
-#define QE_GTCFR1_STP1	0x02
-#define QE_GTCFR1_RST1	0x01
-
-/* SDMA registers */
-#define QE_SDSR_BER1	0x02000000
-#define QE_SDSR_BER2	0x01000000
-
-#define QE_SDMR_GLB_1_MSK	0x80000000
-#define QE_SDMR_ADR_SEL		0x20000000
-#define QE_SDMR_BER1_MSK	0x02000000
-#define QE_SDMR_BER2_MSK	0x01000000
-#define QE_SDMR_EB1_MSK		0x00800000
-#define QE_SDMR_ER1_MSK		0x00080000
-#define QE_SDMR_ER2_MSK		0x00040000
-#define QE_SDMR_CEN_MASK	0x0000E000
-#define QE_SDMR_SBER_1		0x00000200
-#define QE_SDMR_SBER_2		0x00000200
-#define QE_SDMR_EB1_PR_MASK	0x000000C0
-#define QE_SDMR_ER1_PR		0x00000008
-
-#define QE_SDMR_CEN_SHIFT	13
-#define QE_SDMR_EB1_PR_SHIFT	6
-
-#define QE_SDTM_MSNUM_SHIFT	24
-
-#define QE_SDEBCR_BA_MASK	0x01FFFFFF
-
-/* Communication Processor */
-#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
-#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
-#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
-
-/* I-RAM */
-#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
-#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
-#define QE_IRAM_READY           0x80000000      /* Ready */
-
-/* UPC */
-#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
-#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
-#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
-#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
-#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
-
-/* UCC GUEMR register */
-#define UCC_GUEMR_MODE_MASK_RX	0x02
-#define UCC_GUEMR_MODE_FAST_RX	0x02
-#define UCC_GUEMR_MODE_SLOW_RX	0x00
-#define UCC_GUEMR_MODE_MASK_TX	0x01
-#define UCC_GUEMR_MODE_FAST_TX	0x01
-#define UCC_GUEMR_MODE_SLOW_TX	0x00
-#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
-#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
-					   must be set 1 */
-
-/* structure representing UCC SLOW parameter RAM */
-struct ucc_slow_pram {
-	__be16 rbase;		/* RX BD base address */
-	__be16 tbase;		/* TX BD base address */
-	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
-	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
-	__be16 mrblr;		/* Rx buffer length */
-	__be32 rstate;		/* Rx internal state */
-	__be32 rptr;		/* Rx internal data pointer */
-	__be16 rbptr;		/* rb BD Pointer */
-	__be16 rcount;		/* Rx internal byte count */
-	__be32 rtemp;		/* Rx temp */
-	__be32 tstate;		/* Tx internal state */
-	__be32 tptr;		/* Tx internal data pointer */
-	__be16 tbptr;		/* Tx BD pointer */
-	__be16 tcount;		/* Tx byte count */
-	__be32 ttemp;		/* Tx temp */
-	__be32 rcrc;		/* temp receive CRC */
-	__be32 tcrc;		/* temp transmit CRC */
-} __attribute__ ((packed));
-
-/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
-#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
-#define UCC_SLOW_GUMR_H_REVD		0x00002000
-#define UCC_SLOW_GUMR_H_TRX		0x00001000
-#define UCC_SLOW_GUMR_H_TTX		0x00000800
-#define UCC_SLOW_GUMR_H_CDP		0x00000400
-#define UCC_SLOW_GUMR_H_CTSP		0x00000200
-#define UCC_SLOW_GUMR_H_CDS		0x00000100
-#define UCC_SLOW_GUMR_H_CTSS		0x00000080
-#define UCC_SLOW_GUMR_H_TFL		0x00000040
-#define UCC_SLOW_GUMR_H_RFW		0x00000020
-#define UCC_SLOW_GUMR_H_TXSY		0x00000010
-#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
-#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
-#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
-#define UCC_SLOW_GUMR_H_RTSM		0x00000002
-#define UCC_SLOW_GUMR_H_RSYN		0x00000001
-
-#define UCC_SLOW_GUMR_L_TCI		0x10000000
-#define UCC_SLOW_GUMR_L_RINV		0x02000000
-#define UCC_SLOW_GUMR_L_TINV		0x01000000
-#define UCC_SLOW_GUMR_L_TEND		0x00040000
-#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
-#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
-#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
-#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
-#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
-#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
-#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
-#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
-#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
-#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
-#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
-#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
-#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
-#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
-#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
-#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
-#define UCC_SLOW_GUMR_L_ENR		0x00000020
-#define UCC_SLOW_GUMR_L_ENT		0x00000010
-#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
-#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
-#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
-#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
-#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
-
-/* General UCC FAST Mode Register */
-#define UCC_FAST_GUMR_TCI	0x20000000
-#define UCC_FAST_GUMR_TRX	0x10000000
-#define UCC_FAST_GUMR_TTX	0x08000000
-#define UCC_FAST_GUMR_CDP	0x04000000
-#define UCC_FAST_GUMR_CTSP	0x02000000
-#define UCC_FAST_GUMR_CDS	0x01000000
-#define UCC_FAST_GUMR_CTSS	0x00800000
-#define UCC_FAST_GUMR_TXSY	0x00020000
-#define UCC_FAST_GUMR_RSYN	0x00010000
-#define UCC_FAST_GUMR_RTSM	0x00002000
-#define UCC_FAST_GUMR_REVD	0x00000400
-#define UCC_FAST_GUMR_ENR	0x00000020
-#define UCC_FAST_GUMR_ENT	0x00000010
-
-/* UART Slow UCC Event Register (UCCE) */
-#define UCC_UART_UCCE_AB	0x0200
-#define UCC_UART_UCCE_IDLE	0x0100
-#define UCC_UART_UCCE_GRA	0x0080
-#define UCC_UART_UCCE_BRKE	0x0040
-#define UCC_UART_UCCE_BRKS	0x0020
-#define UCC_UART_UCCE_CCR	0x0008
-#define UCC_UART_UCCE_BSY	0x0004
-#define UCC_UART_UCCE_TX	0x0002
-#define UCC_UART_UCCE_RX	0x0001
-
-/* HDLC Slow UCC Event Register (UCCE) */
-#define UCC_HDLC_UCCE_GLR	0x1000
-#define UCC_HDLC_UCCE_GLT	0x0800
-#define UCC_HDLC_UCCE_IDLE	0x0100
-#define UCC_HDLC_UCCE_BRKE	0x0040
-#define UCC_HDLC_UCCE_BRKS	0x0020
-#define UCC_HDLC_UCCE_TXE	0x0010
-#define UCC_HDLC_UCCE_RXF	0x0008
-#define UCC_HDLC_UCCE_BSY	0x0004
-#define UCC_HDLC_UCCE_TXB	0x0002
-#define UCC_HDLC_UCCE_RXB	0x0001
-
-/* BISYNC Slow UCC Event Register (UCCE) */
-#define UCC_BISYNC_UCCE_GRA	0x0080
-#define UCC_BISYNC_UCCE_TXE	0x0010
-#define UCC_BISYNC_UCCE_RCH	0x0008
-#define UCC_BISYNC_UCCE_BSY	0x0004
-#define UCC_BISYNC_UCCE_TXB	0x0002
-#define UCC_BISYNC_UCCE_RXB	0x0001
-
-/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
-#define UCC_GETH_UCCE_MPD       0x80000000
-#define UCC_GETH_UCCE_SCAR      0x40000000
-#define UCC_GETH_UCCE_GRA       0x20000000
-#define UCC_GETH_UCCE_CBPR      0x10000000
-#define UCC_GETH_UCCE_BSY       0x08000000
-#define UCC_GETH_UCCE_RXC       0x04000000
-#define UCC_GETH_UCCE_TXC       0x02000000
-#define UCC_GETH_UCCE_TXE       0x01000000
-#define UCC_GETH_UCCE_TXB7      0x00800000
-#define UCC_GETH_UCCE_TXB6      0x00400000
-#define UCC_GETH_UCCE_TXB5      0x00200000
-#define UCC_GETH_UCCE_TXB4      0x00100000
-#define UCC_GETH_UCCE_TXB3      0x00080000
-#define UCC_GETH_UCCE_TXB2      0x00040000
-#define UCC_GETH_UCCE_TXB1      0x00020000
-#define UCC_GETH_UCCE_TXB0      0x00010000
-#define UCC_GETH_UCCE_RXB7      0x00008000
-#define UCC_GETH_UCCE_RXB6      0x00004000
-#define UCC_GETH_UCCE_RXB5      0x00002000
-#define UCC_GETH_UCCE_RXB4      0x00001000
-#define UCC_GETH_UCCE_RXB3      0x00000800
-#define UCC_GETH_UCCE_RXB2      0x00000400
-#define UCC_GETH_UCCE_RXB1      0x00000200
-#define UCC_GETH_UCCE_RXB0      0x00000100
-#define UCC_GETH_UCCE_RXF7      0x00000080
-#define UCC_GETH_UCCE_RXF6      0x00000040
-#define UCC_GETH_UCCE_RXF5      0x00000020
-#define UCC_GETH_UCCE_RXF4      0x00000010
-#define UCC_GETH_UCCE_RXF3      0x00000008
-#define UCC_GETH_UCCE_RXF2      0x00000004
-#define UCC_GETH_UCCE_RXF1      0x00000002
-#define UCC_GETH_UCCE_RXF0      0x00000001
-
-/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
-#define UCC_UART_UPSMR_FLC		0x8000
-#define UCC_UART_UPSMR_SL		0x4000
-#define UCC_UART_UPSMR_CL_MASK		0x3000
-#define UCC_UART_UPSMR_CL_8		0x3000
-#define UCC_UART_UPSMR_CL_7		0x2000
-#define UCC_UART_UPSMR_CL_6		0x1000
-#define UCC_UART_UPSMR_CL_5		0x0000
-#define UCC_UART_UPSMR_UM_MASK		0x0c00
-#define UCC_UART_UPSMR_UM_NORMAL	0x0000
-#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
-#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
-#define UCC_UART_UPSMR_FRZ		0x0200
-#define UCC_UART_UPSMR_RZS		0x0100
-#define UCC_UART_UPSMR_SYN		0x0080
-#define UCC_UART_UPSMR_DRT		0x0040
-#define UCC_UART_UPSMR_PEN		0x0010
-#define UCC_UART_UPSMR_RPM_MASK		0x000c
-#define UCC_UART_UPSMR_RPM_ODD		0x0000
-#define UCC_UART_UPSMR_RPM_LOW		0x0004
-#define UCC_UART_UPSMR_RPM_EVEN		0x0008
-#define UCC_UART_UPSMR_RPM_HIGH		0x000C
-#define UCC_UART_UPSMR_TPM_MASK		0x0003
-#define UCC_UART_UPSMR_TPM_ODD		0x0000
-#define UCC_UART_UPSMR_TPM_LOW		0x0001
-#define UCC_UART_UPSMR_TPM_EVEN		0x0002
-#define UCC_UART_UPSMR_TPM_HIGH		0x0003
-
-/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
-#define UCC_GETH_UPSMR_FTFE     0x80000000
-#define UCC_GETH_UPSMR_PTPE     0x40000000
-#define UCC_GETH_UPSMR_ECM      0x04000000
-#define UCC_GETH_UPSMR_HSE      0x02000000
-#define UCC_GETH_UPSMR_PRO      0x00400000
-#define UCC_GETH_UPSMR_CAP      0x00200000
-#define UCC_GETH_UPSMR_RSH      0x00100000
-#define UCC_GETH_UPSMR_RPM      0x00080000
-#define UCC_GETH_UPSMR_R10M     0x00040000
-#define UCC_GETH_UPSMR_RLPB     0x00020000
-#define UCC_GETH_UPSMR_TBIM     0x00010000
-#define UCC_GETH_UPSMR_RES1     0x00002000
-#define UCC_GETH_UPSMR_RMM      0x00001000
-#define UCC_GETH_UPSMR_CAM      0x00000400
-#define UCC_GETH_UPSMR_BRO      0x00000200
-#define UCC_GETH_UPSMR_SMM	0x00000080
-#define UCC_GETH_UPSMR_SGMM	0x00000020
-
-/* UCC Transmit On Demand Register (UTODR) */
-#define UCC_SLOW_TOD	0x8000
-#define UCC_FAST_TOD	0x8000
-
-/* UCC Bus Mode Register masks */
-/* Not to be confused with the Bundle Mode Register */
-#define UCC_BMR_GBL		0x20
-#define UCC_BMR_BO_BE		0x10
-#define UCC_BMR_CETM		0x04
-#define UCC_BMR_DTB		0x02
-#define UCC_BMR_BDB		0x01
-
-/* Function code masks */
-#define FC_GBL				0x20
-#define FC_DTB_LCL			0x02
-#define UCC_FAST_FUNCTION_CODE_GBL	0x20
-#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
-#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_QE_H */
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
deleted file mode 100644
index 1e155ca6d33c..000000000000
--- a/arch/powerpc/include/asm/qe_ic.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE IC external definitions and structure.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _ASM_POWERPC_QE_IC_H
-#define _ASM_POWERPC_QE_IC_H
-
-#include <linux/irq.h>
-
-struct device_node;
-struct qe_ic;
-
-#define NUM_OF_QE_IC_GROUPS	6
-
-/* Flags when we init the QE IC */
-#define QE_IC_SPREADMODE_GRP_W			0x00000001
-#define QE_IC_SPREADMODE_GRP_X			0x00000002
-#define QE_IC_SPREADMODE_GRP_Y			0x00000004
-#define QE_IC_SPREADMODE_GRP_Z			0x00000008
-#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
-#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
-
-#define QE_IC_LOW_SIGNAL			0x00000100
-#define QE_IC_HIGH_SIGNAL			0x00000200
-
-#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
-#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
-#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
-#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
-#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
-#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
-#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
-#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
-#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
-#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
-#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
-#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
-#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
-
-/* QE interrupt sources groups */
-enum qe_ic_grp_id {
-	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
-	QE_IC_GRP_X,		/* QE interrupt controller group X */
-	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
-	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
-	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
-	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
-};
-
-#ifdef CONFIG_QUICC_ENGINE
-void qe_ic_init(struct device_node *node, unsigned int flags,
-		void (*low_handler)(struct irq_desc *desc),
-		void (*high_handler)(struct irq_desc *desc));
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
-#else
-static inline void qe_ic_init(struct device_node *node, unsigned int flags,
-		void (*low_handler)(struct irq_desc *desc),
-		void (*high_handler)(struct irq_desc *desc))
-{}
-static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{ return 0; }
-static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{ return 0; }
-#endif /* CONFIG_QUICC_ENGINE */
-
-void qe_ic_set_highest_priority(unsigned int virq, int high);
-int qe_ic_set_priority(unsigned int virq, unsigned int priority);
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
-
-static inline void qe_ic_cascade_low_ipic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_high_ipic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_low_mpic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_high_mpic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
-{
-	struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
-	unsigned int cascade_irq;
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-
-	cascade_irq = qe_ic_get_high_irq(qe_ic);
-	if (cascade_irq == NO_IRQ)
-		cascade_irq = qe_ic_get_low_irq(qe_ic);
-
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-
-	chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index a908ada8e0a5..f5f4c66bbbc9 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -75,6 +75,14 @@
 #define MSR_HV		0
 #endif
 
+/*
+ * To be used in shared book E/book S, this avoids needing to worry about
+ * book S/book E in shared code
+ */
+#ifndef MSR_SPE
+#define MSR_SPE 	0
+#endif
+
 #define MSR_VEC		__MASK(MSR_VEC_LG)	/* Enable AltiVec */
 #define MSR_VSX		__MASK(MSR_VSX_LG)	/* Enable VSX */
 #define MSR_POW		__MASK(MSR_POW_LG)	/* Enable Power Management */
@@ -108,6 +116,7 @@
 #define MSR_TS_T	__MASK(MSR_TS_T_LG)	/*  Transaction Transactional */
 #define MSR_TS_MASK	(MSR_TS_T | MSR_TS_S)   /* Transaction State bits */
 #define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */
+#define MSR_TM_RESV(x) (((x) & MSR_TS_MASK) == MSR_TS_MASK) /* Reserved */
 #define MSR_TM_TRANSACTIONAL(x)	(((x) & MSR_TS_MASK) == MSR_TS_T)
 #define MSR_TM_SUSPENDED(x)	(((x) & MSR_TS_MASK) == MSR_TS_S)
 
@@ -375,7 +384,7 @@
 #define SPRN_TSCR	0x399	/* Thread Switch Control Register */
 
 #define SPRN_DEC	0x016		/* Decrement Register */
-#define SPRN_DER	0x095		/* Debug Enable Regsiter */
+#define SPRN_DER	0x095		/* Debug Enable Register */
 #define DER_RSTE	0x40000000	/* Reset Interrupt */
 #define DER_CHSTPE	0x20000000	/* Check Stop */
 #define DER_MCIE	0x10000000	/* Machine Check Interrupt */
@@ -400,7 +409,7 @@
 #define SPRN_DPDES	0x0B0		/* Directed Priv. Doorbell Exc. State */
 #define SPRN_EAR	0x11A		/* External Address Register */
 #define SPRN_HASH1	0x3D2		/* Primary Hash Address Register */
-#define SPRN_HASH2	0x3D3		/* Secondary Hash Address Resgister */
+#define SPRN_HASH2	0x3D3		/* Secondary Hash Address Register */
 #define SPRN_HID0	0x3F0		/* Hardware Implementation Register 0 */
 #define HID0_HDICE_SH	(63 - 23)	/* 970 HDEC interrupt enable */
 #define HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
@@ -513,7 +522,7 @@
 #define ICTRL_EICP	0x00000100	/* enable icache par. check */
 #define SPRN_IMISS	0x3D4		/* Instruction TLB Miss Register */
 #define SPRN_IMMR	0x27E		/* Internal Memory Map Register */
-#define SPRN_L2CR	0x3F9		/* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR	0x3F9		/* Level 2 Cache Control Register */
 #define SPRN_L2CR2	0x3f8
 #define L2CR_L2E		0x80000000	/* L2 enable */
 #define L2CR_L2PE		0x40000000	/* L2 parity enable */
@@ -548,7 +557,7 @@
 #define L2CR_L2DO_745x		0x00010000	/* L2 data only (745x) */
 #define L2CR_L2REP_745x		0x00001000	/* L2 repl. algorithm (745x) */
 #define L2CR_L2HWF_745x		0x00000800	/* L2 hardware flush (745x) */
-#define SPRN_L3CR		0x3FA	/* Level 3 Cache Control Regsiter */
+#define SPRN_L3CR		0x3FA	/* Level 3 Cache Control Register */
 #define L3CR_L3E		0x80000000	/* L3 enable */
 #define L3CR_L3PE		0x40000000	/* L3 data parity enable */
 #define L3CR_L3APE		0x20000000	/* L3 addr parity enable */
@@ -1193,18 +1202,37 @@
 #define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
 				     : : "r" (v) : "memory")
 #define mtmsr(v)	__mtmsrd((v), 0)
+#define __MTMSR		"mtmsrd"
 #else
 #define mtmsr(v)	asm volatile("mtmsr %0" : \
 				     : "r" ((unsigned long)(v)) \
 				     : "memory")
+#define __MTMSR		"mtmsr"
 #endif
 
+static inline void mtmsr_isync(unsigned long val)
+{
+	asm volatile(__MTMSR " %0; " ASM_FTR_IFCLR("isync", "nop", %1) : :
+			"r" (val), "i" (CPU_FTR_ARCH_206) : "memory");
+}
+
 #define mfspr(rn)	({unsigned long rval; \
 			asm volatile("mfspr %0," __stringify(rn) \
 				: "=r" (rval)); rval;})
+#ifndef mtspr
 #define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : \
 				     : "r" ((unsigned long)(v)) \
 				     : "memory")
+#endif
+
+extern void msr_check_and_set(unsigned long bits);
+extern bool strict_msr_control;
+extern void __msr_check_and_clear(unsigned long bits);
+static inline void msr_check_and_clear(unsigned long bits)
+{
+	if (strict_msr_control)
+		__msr_check_and_clear(bits);
+}
 
 static inline unsigned long mfvtb (void)
 {
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
index e8ea346b21d3..94d01f81e668 100644
--- a/arch/powerpc/include/asm/reg_8xx.h
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -4,6 +4,8 @@
 #ifndef _ASM_POWERPC_REG_8xx_H
 #define _ASM_POWERPC_REG_8xx_H
 
+#include <asm/mmu-8xx.h>
+
 /* Cache control on the MPC8xx is provided through some additional
  * special purpose registers.
  */
@@ -14,6 +16,15 @@
 #define SPRN_DC_ADR	569	/* Address needed for some commands */
 #define SPRN_DC_DAT	570	/* Read-only data register */
 
+/* Misc Debug */
+#define SPRN_DPDR	630
+#define SPRN_MI_CAM	816
+#define SPRN_MI_RAM0	817
+#define SPRN_MI_RAM1	818
+#define SPRN_MD_CAM	824
+#define SPRN_MD_RAM0	825
+#define SPRN_MD_RAM1	826
+
 /* Commands.  Only the first few are available to the instruction cache.
 */
 #define	IDC_ENABLE	0x02000000	/* Cache enable */
@@ -39,4 +50,86 @@
 #define DC_DFWT		0x40000000	/* Data cache is forced write through */
 #define DC_LES		0x20000000	/* Caches are little endian mode */
 
+#ifdef CONFIG_8xx_CPU6
+#define do_mtspr_cpu6(rn, rn_addr, v)	\
+	do {								\
+		int _reg_cpu6 = rn_addr, _tmp_cpu6;		\
+		asm volatile("stw %0, %1;"				\
+			     "lwz %0, %1;"				\
+			     "mtspr " __stringify(rn) ",%2" :		\
+			     : "r" (_reg_cpu6), "m"(_tmp_cpu6),		\
+			       "r" ((unsigned long)(v))			\
+			     : "memory");				\
+	} while (0)
+
+#define do_mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" :	\
+				     : "r" ((unsigned long)(v))		\
+				     : "memory")
+#define mtspr(rn, v) \
+	do {								\
+		if (rn == SPRN_IMMR)					\
+			do_mtspr_cpu6(rn, 0x3d30, v);			\
+		else if (rn == SPRN_IC_CST)				\
+			do_mtspr_cpu6(rn, 0x2110, v);			\
+		else if (rn == SPRN_IC_ADR)				\
+			do_mtspr_cpu6(rn, 0x2310, v);			\
+		else if (rn == SPRN_IC_DAT)				\
+			do_mtspr_cpu6(rn, 0x2510, v);			\
+		else if (rn == SPRN_DC_CST)				\
+			do_mtspr_cpu6(rn, 0x3110, v);			\
+		else if (rn == SPRN_DC_ADR)				\
+			do_mtspr_cpu6(rn, 0x3310, v);			\
+		else if (rn == SPRN_DC_DAT)				\
+			do_mtspr_cpu6(rn, 0x3510, v);			\
+		else if (rn == SPRN_MI_CTR)				\
+			do_mtspr_cpu6(rn, 0x2180, v);			\
+		else if (rn == SPRN_MI_AP)				\
+			do_mtspr_cpu6(rn, 0x2580, v);			\
+		else if (rn == SPRN_MI_EPN)				\
+			do_mtspr_cpu6(rn, 0x2780, v);			\
+		else if (rn == SPRN_MI_TWC)				\
+			do_mtspr_cpu6(rn, 0x2b80, v);			\
+		else if (rn == SPRN_MI_RPN)				\
+			do_mtspr_cpu6(rn, 0x2d80, v);			\
+		else if (rn == SPRN_MI_CAM)				\
+			do_mtspr_cpu6(rn, 0x2190, v);			\
+		else if (rn == SPRN_MI_RAM0)				\
+			do_mtspr_cpu6(rn, 0x2390, v);			\
+		else if (rn == SPRN_MI_RAM1)				\
+			do_mtspr_cpu6(rn, 0x2590, v);			\
+		else if (rn == SPRN_MD_CTR)				\
+			do_mtspr_cpu6(rn, 0x3180, v);			\
+		else if (rn == SPRN_M_CASID)				\
+			do_mtspr_cpu6(rn, 0x3380, v);			\
+		else if (rn == SPRN_MD_AP)				\
+			do_mtspr_cpu6(rn, 0x3580, v);			\
+		else if (rn == SPRN_MD_EPN)				\
+			do_mtspr_cpu6(rn, 0x3780, v);			\
+		else if (rn == SPRN_M_TWB)				\
+			do_mtspr_cpu6(rn, 0x3980, v);			\
+		else if (rn == SPRN_MD_TWC)				\
+			do_mtspr_cpu6(rn, 0x3b80, v);			\
+		else if (rn == SPRN_MD_RPN)				\
+			do_mtspr_cpu6(rn, 0x3d80, v);			\
+		else if (rn == SPRN_M_TW)				\
+			do_mtspr_cpu6(rn, 0x3f80, v);			\
+		else if (rn == SPRN_MD_CAM)				\
+			do_mtspr_cpu6(rn, 0x3190, v);			\
+		else if (rn == SPRN_MD_RAM0)				\
+			do_mtspr_cpu6(rn, 0x3390, v);			\
+		else if (rn == SPRN_MD_RAM1)				\
+			do_mtspr_cpu6(rn, 0x3590, v);			\
+		else if (rn == SPRN_DEC)				\
+			do_mtspr_cpu6(rn, 0x2c00, v);			\
+		else if (rn == SPRN_TBWL)				\
+			do_mtspr_cpu6(rn, 0x3880, v);			\
+		else if (rn == SPRN_TBWU)				\
+			do_mtspr_cpu6(rn, 0x3a80, v);			\
+		else if (rn == SPRN_DPDR)				\
+			do_mtspr_cpu6(rn, 0x2d30, v);			\
+		else							\
+			do_mtspr(rn, v);				\
+	} while (0)
+#endif
+
 #endif /* _ASM_POWERPC_REG_8xx_H */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 2fef74b474f0..737e012ef56e 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -681,7 +681,7 @@
 #define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
 #define SPRN_TBHI	0x3DC	/* Time Base High */
 #define SPRN_TBLO	0x3DD	/* Time Base Low */
-#define SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
+#define SPRN_DBCR	0x3F2	/* Debug Control Register */
 #define SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
 #define SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
 #define SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index b77ef369c0f0..51400baa8d48 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -334,10 +334,11 @@ extern void (*rtas_flash_term_hook)(int);
 
 extern struct rtas_t rtas;
 
-extern void enter_rtas(unsigned long);
 extern int rtas_token(const char *service);
 extern int rtas_service_present(const char *service);
 extern int rtas_call(int token, int, int, int *, ...);
+void rtas_call_unlocked(struct rtas_args *args, int token, int nargs,
+			int nret, ...);
 extern void rtas_restart(char *cmd);
 extern void rtas_power_off(void);
 extern void rtas_halt(void);
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index a5e930aca804..abf5866e08c6 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -22,6 +22,18 @@ static inline int in_kernel_text(unsigned long addr)
 	return 0;
 }
 
+static inline unsigned long kernel_toc_addr(void)
+{
+	/* Defined by the linker, see vmlinux.lds.S */
+	extern unsigned long __toc_start;
+
+	/*
+	 * The TOC register (r2) points 32kB into the TOC, so that 64kB of
+	 * the TOC can be addressed using a single machine instruction.
+	 */
+	return (unsigned long)(&__toc_start) + 0x8000UL;
+}
+
 static inline int overlaps_interrupt_vector_text(unsigned long start,
 							unsigned long end)
 {
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 825663c30945..e1afd4c4f695 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -67,6 +67,9 @@ void generic_cpu_die(unsigned int cpu);
 void generic_set_cpu_dead(unsigned int cpu);
 void generic_set_cpu_up(unsigned int cpu);
 int generic_check_cpu_restart(unsigned int cpu);
+int is_cpu_dead(unsigned int cpu);
+#else
+#define generic_set_cpu_up(i)	do { } while (0)
 #endif
 
 #ifdef CONFIG_PPC64
@@ -114,6 +117,9 @@ extern int cpu_to_core_id(int cpu);
 #define PPC_MSG_TICK_BROADCAST	2
 #define PPC_MSG_DEBUGGER_BREAK  3
 
+/* This is only used by the powernv kernel */
+#define PPC_MSG_RM_HOST_ACTION	4
+
 /* for irq controllers that have dedicated ipis per message (4) */
 extern int smp_request_message_ipi(int virq, int message);
 extern const char *smp_ipi_name[];
@@ -121,6 +127,7 @@ extern const char *smp_ipi_name[];
 /* for irq controllers with only a single ipi */
 extern void smp_muxed_ipi_set_data(int cpu, unsigned long data);
 extern void smp_muxed_ipi_message_pass(int cpu, int msg);
+extern void smp_muxed_ipi_set_message(int cpu, int msg);
 extern irqreturn_t smp_ipi_demux(void);
 
 void smp_init_pSeries(void);
@@ -197,6 +204,7 @@ extern void generic_secondary_thread_init(void);
 extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
+extern unsigned int booting_thread_hwid;
 
 extern void __early_start(void);
 #endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h
index 37d2da6feabf..f280dd11243f 100644
--- a/arch/powerpc/include/asm/smu.h
+++ b/arch/powerpc/include/asm/smu.h
@@ -154,7 +154,7 @@
   *
   * The Darwin I2C driver is less subtle though. On any non-success status
   * from the response command, it waits 5ms and tries again up to 20 times,
-  * it doesn't differenciate between fatal errors or "busy" status.
+  * it doesn't differentiate between fatal errors or "busy" status.
   *
   * This driver provides an asynchronous paramblock based i2c command
   * interface to be used either directly by low level code or by a higher
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 15cca17cba4b..17c8380673a6 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -4,6 +4,8 @@
 #ifndef _ASM_POWERPC_SWITCH_TO_H
 #define _ASM_POWERPC_SWITCH_TO_H
 
+#include <asm/reg.h>
+
 struct thread_struct;
 struct task_struct;
 struct pt_regs;
@@ -12,75 +14,65 @@ extern struct task_struct *__switch_to(struct task_struct *,
 	struct task_struct *);
 #define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
 
-struct thread_struct;
 extern struct task_struct *_switch(struct thread_struct *prev,
 				   struct thread_struct *next);
-#ifdef CONFIG_PPC_BOOK3S_64
-static inline void save_early_sprs(struct thread_struct *prev)
-{
-	if (cpu_has_feature(CPU_FTR_ARCH_207S))
-		prev->tar = mfspr(SPRN_TAR);
-	if (cpu_has_feature(CPU_FTR_DSCR))
-		prev->dscr = mfspr(SPRN_DSCR);
-}
-#else
-static inline void save_early_sprs(struct thread_struct *prev) {}
-#endif
 
-extern void enable_kernel_fp(void);
-extern void enable_kernel_altivec(void);
-extern void enable_kernel_vsx(void);
-extern int emulate_altivec(struct pt_regs *);
-extern void __giveup_vsx(struct task_struct *);
-extern void giveup_vsx(struct task_struct *);
-extern void enable_kernel_spe(void);
-extern void giveup_spe(struct task_struct *);
-extern void load_up_spe(struct task_struct *);
 extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
+extern int emulate_altivec(struct pt_regs *);
+
+extern void flush_all_to_thread(struct task_struct *);
+extern void giveup_all(struct task_struct *);
 
 #ifdef CONFIG_PPC_FPU
+extern void enable_kernel_fp(void);
 extern void flush_fp_to_thread(struct task_struct *);
 extern void giveup_fpu(struct task_struct *);
+extern void save_fpu(struct task_struct *);
+static inline void disable_kernel_fp(void)
+{
+	msr_check_and_clear(MSR_FP);
+}
 #else
+static inline void __giveup_fpu(struct task_struct *t) { }
+static inline void save_fpu(struct task_struct *t) { }
 static inline void flush_fp_to_thread(struct task_struct *t) { }
-static inline void giveup_fpu(struct task_struct *t) { }
 #endif
 
 #ifdef CONFIG_ALTIVEC
+extern void enable_kernel_altivec(void);
 extern void flush_altivec_to_thread(struct task_struct *);
 extern void giveup_altivec(struct task_struct *);
-extern void giveup_altivec_notask(void);
-#else
-static inline void flush_altivec_to_thread(struct task_struct *t)
-{
-}
-static inline void giveup_altivec(struct task_struct *t)
+extern void save_altivec(struct task_struct *);
+static inline void disable_kernel_altivec(void)
 {
+	msr_check_and_clear(MSR_VEC);
 }
+#else
+static inline void save_altivec(struct task_struct *t) { }
+static inline void __giveup_altivec(struct task_struct *t) { }
 #endif
 
 #ifdef CONFIG_VSX
+extern void enable_kernel_vsx(void);
 extern void flush_vsx_to_thread(struct task_struct *);
-#else
-static inline void flush_vsx_to_thread(struct task_struct *t)
+static inline void disable_kernel_vsx(void)
 {
+	msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX);
 }
 #endif
 
 #ifdef CONFIG_SPE
+extern void enable_kernel_spe(void);
 extern void flush_spe_to_thread(struct task_struct *);
-#else
-static inline void flush_spe_to_thread(struct task_struct *t)
+extern void giveup_spe(struct task_struct *);
+extern void __giveup_spe(struct task_struct *);
+static inline void disable_kernel_spe(void)
 {
+	msr_check_and_clear(MSR_SPE);
 }
+#else
+static inline void __giveup_spe(struct task_struct *t) { }
 #endif
 
 static inline void clear_task_ebb(struct task_struct *t)
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
index e682a7143edb..c50868681f9e 100644
--- a/arch/powerpc/include/asm/synch.h
+++ b/arch/powerpc/include/asm/synch.h
@@ -44,7 +44,7 @@ static inline void isync(void)
 	MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup);
 #define PPC_ACQUIRE_BARRIER	 "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER)
 #define PPC_RELEASE_BARRIER	 stringify_in_c(LWSYNC) "\n"
-#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(LWSYNC) "\n"
+#define PPC_ATOMIC_ENTRY_BARRIER "\n" stringify_in_c(sync) "\n"
 #define PPC_ATOMIC_EXIT_BARRIER	 "\n" stringify_in_c(sync) "\n"
 #else
 #define PPC_ACQUIRE_BARRIER
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index c9e26cb264f4..3fa9df70aa20 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -370,15 +370,17 @@ COMPAT_SYS(execveat)
 PPC64ONLY(switch_endian)
 SYSCALL_SPU(userfaultfd)
 SYSCALL_SPU(membarrier)
-SYSCALL(semop)
-SYSCALL(semget)
-COMPAT_SYS(semctl)
-COMPAT_SYS(semtimedop)
-COMPAT_SYS(msgsnd)
-COMPAT_SYS(msgrcv)
-SYSCALL(msgget)
-COMPAT_SYS(msgctl)
-COMPAT_SYS(shmat)
-SYSCALL(shmdt)
-SYSCALL(shmget)
-COMPAT_SYS(shmctl)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYSCALL(mlock2)
+SYSCALL(copy_file_range)
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index 10fc784a2ad4..1092fdd7e737 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -27,13 +27,10 @@ extern struct clock_event_device decrementer_clockevent;
 
 struct rtc_time;
 extern void to_tm(int tim, struct rtc_time * tm);
-extern void GregorianDay(struct rtc_time *tm);
 extern void tick_broadcast_ipi_handler(void);
 
 extern void generic_calibrate_decr(void);
 
-extern void set_dec_cpu6(unsigned int val);
-
 /* Some sane defaults: 125 MHz timebase, 1GHz processor */
 extern unsigned long ppc_proc_freq;
 #define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
@@ -167,14 +164,12 @@ static inline void set_dec(int val)
 {
 #if defined(CONFIG_40x)
 	mtspr(SPRN_PIT, val);
-#elif defined(CONFIG_8xx_CPU6)
-	set_dec_cpu6(val - 1);
 #else
 #ifndef CONFIG_BOOKE
 	--val;
 #endif
 	mtspr(SPRN_DEC, val);
-#endif /* not 40x or 8xx_CPU6 */
+#endif /* not 40x */
 }
 
 static inline unsigned long tb_ticks_since(unsigned long tstamp)
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index 23d351ca0303..9f77f85e3e99 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -78,97 +78,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 }
 
 #elif defined(CONFIG_PPC_STD_MMU_64)
-
-#define MMU_NO_CONTEXT		0
-
-/*
- * TLB flushing for 64-bit hash-MMU CPUs
- */
-
-#include <linux/percpu.h>
-#include <asm/page.h>
-
-#define PPC64_TLB_BATCH_NR 192
-
-struct ppc64_tlb_batch {
-	int			active;
-	unsigned long		index;
-	struct mm_struct	*mm;
-	real_pte_t		pte[PPC64_TLB_BATCH_NR];
-	unsigned long		vpn[PPC64_TLB_BATCH_NR];
-	unsigned int		psize;
-	int			ssize;
-};
-DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
-
-extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
-
-#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
-
-static inline void arch_enter_lazy_mmu_mode(void)
-{
-	struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch);
-
-	batch->active = 1;
-}
-
-static inline void arch_leave_lazy_mmu_mode(void)
-{
-	struct ppc64_tlb_batch *batch = this_cpu_ptr(&ppc64_tlb_batch);
-
-	if (batch->index)
-		__flush_tlb_pending(batch);
-	batch->active = 0;
-}
-
-#define arch_flush_lazy_mmu_mode()      do {} while (0)
-
-
-extern void flush_hash_page(unsigned long vpn, real_pte_t pte, int psize,
-			    int ssize, unsigned long flags);
-extern void flush_hash_range(unsigned long number, int local);
-extern void flush_hash_hugepage(unsigned long vsid, unsigned long addr,
-				pmd_t *pmdp, unsigned int psize, int ssize,
-				unsigned long flags);
-
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
-{
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
-}
-
-static inline void local_flush_tlb_page(struct vm_area_struct *vma,
-					unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
-				  unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
-					 unsigned long vmaddr)
-{
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end)
-{
-}
-
-static inline void flush_tlb_kernel_range(unsigned long start,
-					  unsigned long end)
-{
-}
-
-/* Private function for use by PCI IO mapping code */
-extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
-				     unsigned long end);
-extern void flush_tlb_pmd_range(struct mm_struct *mm, pmd_t *pmd,
-				unsigned long addr);
+#include <asm/book3s/64/tlbflush-hash.h>
 #else
 #error Unsupported MMU type
 #endif
diff --git a/arch/powerpc/include/asm/trace.h b/arch/powerpc/include/asm/trace.h
index 8e86b48d0369..32e36b16773f 100644
--- a/arch/powerpc/include/asm/trace.h
+++ b/arch/powerpc/include/asm/trace.h
@@ -57,12 +57,14 @@ DEFINE_EVENT(ppc64_interrupt_class, timer_interrupt_exit,
 extern void hcall_tracepoint_regfunc(void);
 extern void hcall_tracepoint_unregfunc(void);
 
-TRACE_EVENT_FN(hcall_entry,
+TRACE_EVENT_FN_COND(hcall_entry,
 
 	TP_PROTO(unsigned long opcode, unsigned long *args),
 
 	TP_ARGS(opcode, args),
 
+	TP_CONDITION(cpu_online(raw_smp_processor_id())),
+
 	TP_STRUCT__entry(
 		__field(unsigned long, opcode)
 	),
@@ -76,13 +78,15 @@ TRACE_EVENT_FN(hcall_entry,
 	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
 );
 
-TRACE_EVENT_FN(hcall_exit,
+TRACE_EVENT_FN_COND(hcall_exit,
 
 	TP_PROTO(unsigned long opcode, unsigned long retval,
 		unsigned long *retbuf),
 
 	TP_ARGS(opcode, retval, retbuf),
 
+	TP_CONDITION(cpu_online(raw_smp_processor_id())),
+
 	TP_STRUCT__entry(
 		__field(unsigned long, opcode)
 		__field(unsigned long, retval)
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 2a8ebae0936b..b7c20f0b8fbe 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -274,21 +274,6 @@ do {								\
 	__gu_err;						\
 })
 
-#ifndef __powerpc64__
-#define __get_user64_nocheck(x, ptr, size)			\
-({								\
-	long __gu_err;						\
-	long long __gu_val;					\
-	__typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	__chk_user_ptr(ptr);					\
-	if (!is_kernel_addr((unsigned long)__gu_addr))		\
-		might_fault();					\
-	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
-	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
-	__gu_err;						\
-})
-#endif /* __powerpc64__ */
-
 #define __get_user_check(x, ptr, size)					\
 ({									\
 	long __gu_err = -EFAULT;					\
diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h
deleted file mode 100644
index 6927ac26516e..000000000000
--- a/arch/powerpc/include/asm/ucc.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_H__
-#define __UCC_H__
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#define STATISTICS
-
-#define UCC_MAX_NUM	8
-
-/* Slow or fast type for UCCs.
-*/
-enum ucc_speed_type {
-	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
-	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
-};
-
-/* ucc_set_type
- * Sets UCC to slow or fast mode.
- *
- * ucc_num - (In) number of UCC (0-7).
- * speed   - (In) slow or fast mode for UCC.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
-	enum comm_dir mode);
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
-
-/* QE MUX clock routing for UCC
-*/
-static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
-}
-
-static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
-}
-
-static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
-{
-	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
-}
-
-#endif				/* __UCC_H__ */
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
deleted file mode 100644
index 72ea9bab07df..000000000000
--- a/arch/powerpc/include/asm/ucc_fast.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * Internal header file for UCC FAST unit routines.
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_FAST_H__
-#define __UCC_FAST_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-
-/* Receive BD's status */
-#define R_E	0x80000000	/* buffer empty */
-#define R_W	0x20000000	/* wrap bit */
-#define R_I	0x10000000	/* interrupt on reception */
-#define R_L	0x08000000	/* last */
-#define R_F	0x04000000	/* first */
-
-/* transmit BD's status */
-#define T_R	0x80000000	/* ready bit */
-#define T_W	0x20000000	/* wrap bit */
-#define T_I	0x10000000	/* interrupt on completion */
-#define T_L	0x08000000	/* last */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases */
-#define UCC_FAST_RX_ALIGN			4
-#define UCC_FAST_MRBLR_ALIGNMENT		4
-#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
-
-/* Sizes */
-#define UCC_FAST_URFS_MIN_VAL				0x88
-#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
-
-/* ucc_fast_channel_protocol_mode - UCC FAST mode */
-enum ucc_fast_channel_protocol_mode {
-	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
-	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
-	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
-	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
-	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
-	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
-	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
-	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
-	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
-	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
-	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
-	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
-};
-
-/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
-enum ucc_fast_transparent_txrx {
-	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
-	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
-};
-
-/* UCC fast diagnostic mode */
-enum ucc_fast_diag_mode {
-	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
-	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
-	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
-	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
-};
-
-/* UCC fast Sync length (transparent mode only) */
-enum ucc_fast_sync_len {
-	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
-	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
-	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
-	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
-};
-
-/* UCC fast RTS mode */
-enum ucc_fast_ready_to_send {
-	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
-	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
-};
-
-/* UCC fast receiver decoding mode */
-enum ucc_fast_rx_decoding_method {
-	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
-	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
-	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
-	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
-};
-
-/* UCC fast transmitter encoding mode */
-enum ucc_fast_tx_encoding_method {
-	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
-	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
-	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
-	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
-};
-
-/* UCC fast CRC length */
-enum ucc_fast_transparent_tcrc {
-	UCC_FAST_16_BIT_CRC = 0x00000000,
-	UCC_FAST_CRC_RESERVED0 = 0x00000040,
-	UCC_FAST_32_BIT_CRC = 0x00000080,
-	UCC_FAST_CRC_RESERVED1 = 0x000000C0
-};
-
-/* Fast UCC initialization structure */
-struct ucc_fast_info {
-	int ucc_num;
-	enum qe_clock rx_clock;
-	enum qe_clock tx_clock;
-	u32 regs;
-	int irq;
-	u32 uccm_mask;
-	int bd_mem_part;
-	int brkpt_support;
-	int grant_support;
-	int tsa;
-	int cdp;
-	int cds;
-	int ctsp;
-	int ctss;
-	int tci;
-	int txsy;
-	int rtsm;
-	int revd;
-	int rsyn;
-	u16 max_rx_buf_length;
-	u16 urfs;
-	u16 urfet;
-	u16 urfset;
-	u16 utfs;
-	u16 utfet;
-	u16 utftt;
-	u16 ufpt;
-	enum ucc_fast_channel_protocol_mode mode;
-	enum ucc_fast_transparent_txrx ttx_trx;
-	enum ucc_fast_tx_encoding_method tenc;
-	enum ucc_fast_rx_decoding_method renc;
-	enum ucc_fast_transparent_tcrc tcrc;
-	enum ucc_fast_sync_len synl;
-};
-
-struct ucc_fast_private {
-	struct ucc_fast_info *uf_info;
-	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
-	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
-	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
-	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
-#endif
-	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
-	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
-	int stopped_tx;		/* Whether channel has been stopped for Tx
-				   (STOP_TX, etc.) */
-	int stopped_rx;		/* Whether channel has been stopped for Rx */
-	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
-						    virtual fifo */
-	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
-						    virtual fifo */
-#ifdef STATISTICS
-	u32 tx_frames;		/* Transmitted frames counter. */
-	u32 rx_frames;		/* Received frames counter (only frames
-				   passed to application). */
-	u32 tx_discarded;	/* Discarded tx frames counter (frames that
-				   were discarded by the driver due to errors).
-				   */
-	u32 rx_discarded;	/* Discarded rx frames counter (frames that
-				   were discarded by the driver due to errors).
-				   */
-#endif				/* STATISTICS */
-	u16 mrblr;		/* maximum receive buffer length */
-};
-
-/* ucc_fast_init
- * Initializes Fast UCC according to user provided parameters.
- *
- * uf_info  - (In) pointer to the fast UCC info structure.
- * uccf_ret - (Out) pointer to the fast UCC structure.
- */
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
-
-/* ucc_fast_free
- * Frees all resources for fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_free(struct ucc_fast_private * uccf);
-
-/* ucc_fast_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccf - (In) pointer to the fast UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
-
-/* ucc_fast_irq
- * Handles interrupts on fast UCC.
- * Called from the general interrupt routine to handle interrupts on fast UCC.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_irq(struct ucc_fast_private * uccf);
-
-/* ucc_fast_transmit_on_demand
- * Immediately forces a poll of the transmitter for data to be sent.
- * Typically, the hardware performs a periodic poll for data that the
- * transmit routine has set up to be transmitted. In cases where
- * this polling cycle is not soon enough, this optional routine can
- * be invoked to force a poll right away, instead. Proper use for
- * each transmission for which this functionality is desired is to
- * call the transmit routine and then this routine right after.
- *
- * uccf - (In) pointer to the fast UCC structure.
- */
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
-
-#endif				/* __UCC_FAST_H__ */
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
deleted file mode 100644
index 233ef5fe5fde..000000000000
--- a/arch/powerpc/include/asm/ucc_slow.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * Internal header file for UCC SLOW unit routines.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef __UCC_SLOW_H__
-#define __UCC_SLOW_H__
-
-#include <linux/kernel.h>
-
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-
-/* transmit BD's status */
-#define T_R	0x80000000	/* ready bit */
-#define T_PAD	0x40000000	/* add pads to short frames */
-#define T_W	0x20000000	/* wrap bit */
-#define T_I	0x10000000	/* interrupt on completion */
-#define T_L	0x08000000	/* last */
-
-#define T_A	0x04000000	/* Address - the data transmitted as address
-				   chars */
-#define T_TC	0x04000000	/* transmit CRC */
-#define T_CM	0x02000000	/* continuous mode */
-#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
-#define T_P	0x01000000	/* Preamble - send Preamble sequence before
-				   data */
-#define T_HB	0x01000000	/* heartbeat */
-#define T_NS	0x00800000	/* No Stop */
-#define T_LC	0x00800000	/* late collision */
-#define T_RL	0x00400000	/* retransmission limit */
-#define T_UN	0x00020000	/* underrun */
-#define T_CT	0x00010000	/* CTS lost */
-#define T_CSL	0x00010000	/* carrier sense lost */
-#define T_RC	0x003c0000	/* retry count */
-
-/* Receive BD's status */
-#define R_E	0x80000000	/* buffer empty */
-#define R_W	0x20000000	/* wrap bit */
-#define R_I	0x10000000	/* interrupt on reception */
-#define R_L	0x08000000	/* last */
-#define R_C	0x08000000	/* the last byte in this buffer is a cntl
-				   char */
-#define R_F	0x04000000	/* first */
-#define R_A	0x04000000	/* the first byte in this buffer is address
-				   byte */
-#define R_CM	0x02000000	/* continuous mode */
-#define R_ID	0x01000000	/* buffer close on reception of idles */
-#define R_M	0x01000000	/* Frame received because of promiscuous
-				   mode */
-#define R_AM	0x00800000	/* Address match */
-#define R_DE	0x00800000	/* Address match */
-#define R_LG	0x00200000	/* Break received */
-#define R_BR	0x00200000	/* Frame length violation */
-#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
-#define R_FR	0x00100000	/* Framing Error (no stop bit) character
-				   received */
-#define R_PR	0x00080000	/* Parity Error character received */
-#define R_AB	0x00080000	/* Frame Aborted */
-#define R_SH	0x00080000	/* frame is too short */
-#define R_CR	0x00040000	/* CRC Error */
-#define R_OV	0x00020000	/* Overrun */
-#define R_CD	0x00010000	/* CD lost */
-#define R_CL	0x00010000	/* this frame is closed because of a
-				   collision */
-
-/* Rx Data buffer must be 4 bytes aligned in most cases.*/
-#define UCC_SLOW_RX_ALIGN		4
-#define UCC_SLOW_MRBLR_ALIGNMENT	4
-#define UCC_SLOW_PRAM_SIZE		0x100
-#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
-
-/* UCC Slow Channel Protocol Mode */
-enum ucc_slow_channel_protocol_mode {
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
-	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
-};
-
-/* UCC Slow Transparent Transmit CRC (TCRC) */
-enum ucc_slow_transparent_tcrc {
-	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
-	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
-	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
-	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
-	/* 32-bit CCITT CRC (Ethernet and HDLC) */
-	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
-};
-
-/* UCC Slow oversampling rate for transmitter (TDCR) */
-enum ucc_slow_tx_oversampling_rate {
-	/* 1x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
-	/* 8x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
-	/* 16x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
-	/* 32x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
-};
-
-/* UCC Slow Oversampling rate for receiver (RDCR)
-*/
-enum ucc_slow_rx_oversampling_rate {
-	/* 1x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
-	/* 8x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
-	/* 16x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
-	/* 32x clock mode */
-	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
-};
-
-/* UCC Slow Transmitter encoding method (TENC)
-*/
-enum ucc_slow_tx_encoding_method {
-	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
-	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
-};
-
-/* UCC Slow Receiver decoding method (RENC)
-*/
-enum ucc_slow_rx_decoding_method {
-	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
-	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
-};
-
-/* UCC Slow Diagnostic mode (DIAG)
-*/
-enum ucc_slow_diag_mode {
-	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
-	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
-	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
-	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
-};
-
-struct ucc_slow_info {
-	int ucc_num;
-	int protocol;			/* QE_CR_PROTOCOL_xxx */
-	enum qe_clock rx_clock;
-	enum qe_clock tx_clock;
-	phys_addr_t regs;
-	int irq;
-	u16 uccm_mask;
-	int data_mem_part;
-	int init_tx;
-	int init_rx;
-	u32 tx_bd_ring_len;
-	u32 rx_bd_ring_len;
-	int rx_interrupts;
-	int brkpt_support;
-	int grant_support;
-	int tsa;
-	int cdp;
-	int cds;
-	int ctsp;
-	int ctss;
-	int rinv;
-	int tinv;
-	int rtsm;
-	int rfw;
-	int tci;
-	int tend;
-	int tfl;
-	int txsy;
-	u16 max_rx_buf_length;
-	enum ucc_slow_transparent_tcrc tcrc;
-	enum ucc_slow_channel_protocol_mode mode;
-	enum ucc_slow_diag_mode diag;
-	enum ucc_slow_tx_oversampling_rate tdcr;
-	enum ucc_slow_rx_oversampling_rate rdcr;
-	enum ucc_slow_tx_encoding_method tenc;
-	enum ucc_slow_rx_decoding_method renc;
-};
-
-struct ucc_slow_private {
-	struct ucc_slow_info *us_info;
-	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
-	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
-	u32 us_pram_offset;
-	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
-	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
-	int stopped_tx;		/* Whether channel has been stopped for Tx
-				   (STOP_TX, etc.) */
-	int stopped_rx;		/* Whether channel has been stopped for Rx */
-	struct list_head confQ;	/* frames passed to chip waiting for tx */
-	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
-				   and length for first BD in a frame */
-	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
-	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
-	struct qe_bd *confBd;	/* next BD for confirm after Tx */
-	struct qe_bd *tx_bd;	/* next BD for new Tx request */
-	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
-	void *p_rx_frame;	/* accumulating receive frame */
-	u16 *p_ucce;		/* a pointer to the event register in memory.
-				 */
-	u16 *p_uccm;		/* a pointer to the mask register in memory */
-	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
-#ifdef STATISTICS
-	u32 tx_frames;		/* Transmitted frames counters */
-	u32 rx_frames;		/* Received frames counters (only frames
-				   passed to application) */
-	u32 rx_discarded;	/* Discarded frames counters (frames that
-				   were discarded by the driver due to
-				   errors) */
-#endif				/* STATISTICS */
-};
-
-/* ucc_slow_init
- * Initializes Slow UCC according to provided parameters.
- *
- * us_info  - (In) pointer to the slow UCC info structure.
- * uccs_ret - (Out) pointer to the slow UCC structure.
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
-
-/* ucc_slow_free
- * Frees all resources for slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_free(struct ucc_slow_private * uccs);
-
-/* ucc_slow_enable
- * Enables a fast UCC port.
- * This routine enables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_disable
- * Disables a fast UCC port.
- * This routine disables Tx and/or Rx through the General UCC Mode Register.
- *
- * uccs - (In) pointer to the slow UCC structure.
- * mode - (In) TX, RX, or both.
- */
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
-
-/* ucc_slow_graceful_stop_tx
- * Smoothly stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_stop_tx
- * Stops transmission on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
-
-/* ucc_slow_restart_tx
- * Restarts transmitting on a specified slow UCC.
- *
- * uccs - (In) pointer to the slow UCC structure.
- */
-void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
-
-#endif				/* __UCC_SLOW_H__ */
diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h
index d12b11d7641e..a1d112979fd2 100644
--- a/arch/powerpc/include/asm/uninorth.h
+++ b/arch/powerpc/include/asm/uninorth.h
@@ -132,7 +132,7 @@
 
 /* This one _might_ return the CPU number of the CPU reading it;
  * the bootROM decides whether to boot or to sleep/spinloop depending
- * on this register beeing 0 or not
+ * on this register being 0 or not
  */
 #define UNI_N_CPU_NUMBER		0x0050
 
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 6d8f8023ac27..1f2594d45605 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -12,10 +12,9 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		378
+#define NR_syscalls		380
 
 #define __NR__exit __NR_exit
-#define NR_syscalls	__NR_syscalls
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index b73a8199f161..1afe90ade595 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -41,7 +41,7 @@
 #include <linux/unistd.h>
 #include <linux/time.h>
 
-#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
+#define SYSCALL_MAP_SIZE      ((NR_syscalls + 31) / 32)
 
 /*
  * So here is the ppc64 backward compatible version
diff --git a/arch/powerpc/include/asm/xics.h b/arch/powerpc/include/asm/xics.h
index 0e25bdb190bb..04ef3ae511da 100644
--- a/arch/powerpc/include/asm/xics.h
+++ b/arch/powerpc/include/asm/xics.h
@@ -1,5 +1,5 @@
 /*
- * Common definitions accross all variants of ICP and ICS interrupt
+ * Common definitions across all variants of ICP and ICS interrupt
  * controllers.
  */
 
@@ -30,6 +30,7 @@
 #ifdef CONFIG_PPC_ICP_NATIVE
 extern int icp_native_init(void);
 extern void icp_native_flush_interrupt(void);
+extern void icp_native_cause_ipi_rm(int cpu);
 #else
 static inline int icp_native_init(void) { return -ENODEV; }
 #endif
diff --git a/arch/powerpc/include/uapi/asm/cputable.h b/arch/powerpc/include/uapi/asm/cputable.h
index 43686043e297..8dde19962a5b 100644
--- a/arch/powerpc/include/uapi/asm/cputable.h
+++ b/arch/powerpc/include/uapi/asm/cputable.h
@@ -43,5 +43,7 @@
 #define PPC_FEATURE2_TAR		0x04000000
 #define PPC_FEATURE2_VEC_CRYPTO		0x02000000
 #define PPC_FEATURE2_HTM_NOSC		0x01000000
+#define PPC_FEATURE2_ARCH_3_00		0x00800000 /* ISA 3.00 */
+#define PPC_FEATURE2_HAS_IEEE128	0x00400000 /* VSX IEEE Binary Float 128-bit */
 
 #endif /* _UAPI__ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/uapi/asm/elf.h b/arch/powerpc/include/uapi/asm/elf.h
index 59dad113897b..c2d21d11c2d2 100644
--- a/arch/powerpc/include/uapi/asm/elf.h
+++ b/arch/powerpc/include/uapi/asm/elf.h
@@ -295,6 +295,8 @@ do {									\
 #define R_PPC64_TLSLD		108
 #define R_PPC64_TOCSAVE		109
 
+#define R_PPC64_ENTRY		118
+
 #define R_PPC64_REL16		249
 #define R_PPC64_REL16_LO	250
 #define R_PPC64_REL16_HI	251
diff --git a/arch/powerpc/include/uapi/asm/epapr_hcalls.h b/arch/powerpc/include/uapi/asm/epapr_hcalls.h
index 7f9c74b46704..b4504f394427 100644
--- a/arch/powerpc/include/uapi/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/uapi/asm/epapr_hcalls.h
@@ -78,7 +78,7 @@
 #define EV_SUCCESS		0
 #define EV_EPERM		1	/* Operation not permitted */
 #define EV_ENOENT		2	/*  Entry Not Found */
-#define EV_EIO			3	/* I/O error occured */
+#define EV_EIO			3	/* I/O error occurred */
 #define EV_EAGAIN		4	/* The operation had insufficient
 					 * resources to complete and should be
 					 * retried
@@ -89,7 +89,7 @@
 #define EV_ENODEV		7	/* No such device */
 #define EV_EINVAL		8	/* An argument supplied to the hcall
 					   was out of range or invalid */
-#define EV_INTERNAL		9	/* An internal error occured */
+#define EV_INTERNAL		9	/* An internal error occurred */
 #define EV_CONFIG		10	/* A configuration error was detected */
 #define EV_INVALID_STATE	11	/* The object is in an invalid state */
 #define EV_UNIMPLEMENTED	12	/* Unimplemented hypercall */
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index ab4d4732c492..c93cf35ce379 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -333,6 +333,15 @@ struct kvm_create_spapr_tce {
 	__u32 window_size;
 };
 
+/* for KVM_CAP_SPAPR_TCE_64 */
+struct kvm_create_spapr_tce_64 {
+	__u64 liobn;
+	__u32 page_shift;
+	__u32 flags;
+	__u64 offset;	/* in pages */
+	__u64 size;	/* in pages */
+};
+
 /* for KVM_ALLOCATE_RMA */
 struct kvm_allocate_rma {
 	__u64 rma_size;
diff --git a/arch/powerpc/include/uapi/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h
index c046666038f8..1672e3398270 100644
--- a/arch/powerpc/include/uapi/asm/socket.h
+++ b/arch/powerpc/include/uapi/asm/socket.h
@@ -92,4 +92,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h
index 81579e93c659..940290d45b08 100644
--- a/arch/powerpc/include/uapi/asm/unistd.h
+++ b/arch/powerpc/include/uapi/asm/unistd.h
@@ -388,17 +388,7 @@
 #define __NR_switch_endian	363
 #define __NR_userfaultfd	364
 #define __NR_membarrier		365
-#define __NR_semop		366
-#define __NR_semget		367
-#define __NR_semctl		368
-#define __NR_semtimedop		369
-#define __NR_msgsnd		370
-#define __NR_msgrcv		371
-#define __NR_msgget		372
-#define __NR_msgctl		373
-#define __NR_shmat		374
-#define __NR_shmdt		375
-#define __NR_shmget		376
-#define __NR_shmctl		377
+#define __NR_mlock2		378
+#define __NR_copy_file_range	379
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index ba336930d448..2da380fcc34c 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -16,14 +16,14 @@ endif
 
 ifdef CONFIG_FUNCTION_TRACER
 # Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
-CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
-CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
-CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_cputable.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_prom_init.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_btext.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_prom.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)
 # do not trace tracer code
-CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_ftrace.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)
 # timers used by tracing
-CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_time.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)
 endif
 
 obj-y				:= cputable.o ptrace.o syscalls.o \
@@ -136,12 +136,18 @@ endif
 obj-$(CONFIG_EPAPR_PARAVIRT)	+= epapr_paravirt.o epapr_hcalls.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o kvm_emul.o
 
-# Disable GCOV in odd or sensitive code
+# Disable GCOV & sanitizers in odd or sensitive code
 GCOV_PROFILE_prom_init.o := n
+UBSAN_SANITIZE_prom_init.o := n
 GCOV_PROFILE_ftrace.o := n
+UBSAN_SANITIZE_ftrace.o := n
 GCOV_PROFILE_machine_kexec_64.o := n
+UBSAN_SANITIZE_machine_kexec_64.o := n
 GCOV_PROFILE_machine_kexec_32.o := n
+UBSAN_SANITIZE_machine_kexec_32.o := n
 GCOV_PROFILE_kprobes.o := n
+UBSAN_SANITIZE_kprobes.o := n
+UBSAN_SANITIZE_vdso.o := n
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-$(CONFIG_ALTIVEC)		+= vector.o
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 86150fbb42c3..8e7cb8e2b21a 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -960,6 +960,7 @@ int fix_alignment(struct pt_regs *regs)
 			preempt_disable();
 			enable_kernel_fp();
 			cvt_df(&data.dd, (float *)&data.x32.low32);
+			disable_kernel_fp();
 			preempt_enable();
 #else
 			return 0;
@@ -1000,6 +1001,7 @@ int fix_alignment(struct pt_regs *regs)
 		preempt_disable();
 		enable_kernel_fp();
 		cvt_fd((float *)&data.x32.low32, &data.dd);
+		disable_kernel_fp();
 		preempt_enable();
 #else
 		return 0;
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 221d584d089f..0d0183d3180a 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -95,12 +95,14 @@ int main(void)
 	DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fp_state));
 	DEFINE(THREAD_FPSAVEAREA, offsetof(struct thread_struct, fp_save_area));
 	DEFINE(FPSTATE_FPSCR, offsetof(struct thread_fp_state, fpscr));
+	DEFINE(THREAD_LOAD_FP, offsetof(struct thread_struct, load_fp));
 #ifdef CONFIG_ALTIVEC
 	DEFINE(THREAD_VRSTATE, offsetof(struct thread_struct, vr_state));
 	DEFINE(THREAD_VRSAVEAREA, offsetof(struct thread_struct, vr_save_area));
 	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
 	DEFINE(VRSTATE_VSCR, offsetof(struct thread_vr_state, vscr));
+	DEFINE(THREAD_LOAD_VEC, offsetof(struct thread_struct, load_vec));
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_VSX
 	DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
@@ -185,14 +187,16 @@ int main(void)
 	DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr));
 	DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled));
 	DEFINE(PACAIRQHAPPENED, offsetof(struct paca_struct, irq_happened));
-	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
+#ifdef CONFIG_PPC_BOOK3S
+	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, mm_ctx_id));
 #ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct,
-					    context.low_slices_psize));
+					    mm_ctx_low_slices_psize));
 	DEFINE(PACAHIGHSLICEPSIZE, offsetof(struct paca_struct,
-					    context.high_slices_psize));
+					    mm_ctx_high_slices_psize));
 	DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
 #endif /* CONFIG_PPC_MM_SLICES */
+#endif
 
 #ifdef CONFIG_PPC_BOOK3E
 	DEFINE(PACAPGD, offsetof(struct paca_struct, pgd));
@@ -222,7 +226,7 @@ int main(void)
 #ifdef CONFIG_PPC_MM_SLICES
 	DEFINE(MMUPSIZESLLP, offsetof(struct mmu_psize_def, sllp));
 #else
-	DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, context.sllp));
+	DEFINE(PACACONTEXTSLLP, offsetof(struct paca_struct, mm_ctx_sllp));
 #endif /* CONFIG_PPC_MM_SLICES */
 	DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
 	DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
@@ -372,6 +376,7 @@ int main(void)
 	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
 	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
 	DEFINE(CPU_SPEC_RESTORE, offsetof(struct cpu_spec, cpu_restore));
+	DEFINE(CPU_DOWN_FLUSH, offsetof(struct cpu_spec, cpu_down_flush));
 
 	DEFINE(pbe_address, offsetof(struct pbe, address));
 	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
index dddba3e94260..462aed9bcf51 100644
--- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S
+++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S
@@ -13,11 +13,13 @@
  *
  */
 
+#include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/ppc_asm.h>
 #include <asm/mmu-book3e.h>
 #include <asm/asm-offsets.h>
+#include <asm/mpc85xx.h>
 
 _GLOBAL(__e500_icache_setup)
 	mfspr	r0, SPRN_L1CSR1
@@ -233,3 +235,113 @@ _GLOBAL(__setup_cpu_e5500)
 	mtlr	r5
 	blr
 #endif
+
+/* flush L1 date cache, it can apply to e500v2, e500mc and e5500 */
+_GLOBAL(flush_dcache_L1)
+	mfmsr	r10
+	wrteei	0
+
+	mfspr	r3,SPRN_L1CFG0
+	rlwinm	r5,r3,9,3	/* Extract cache block size */
+	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
+				 * are currently defined.
+				 */
+	li	r4,32
+	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
+				 *      log2(number of ways)
+				 */
+	slw	r5,r4,r5	/* r5 = cache block size */
+
+	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
+	mulli	r7,r7,13	/* An 8-way cache will require 13
+				 * loads per set.
+				 */
+	slw	r7,r7,r6
+
+	/* save off HID0 and set DCFA */
+	mfspr	r8,SPRN_HID0
+	ori	r9,r8,HID0_DCFA@l
+	mtspr	SPRN_HID0,r9
+	isync
+
+	LOAD_REG_IMMEDIATE(r6, KERNELBASE)
+	mr	r4, r6
+	mtctr	r7
+
+1:	lwz	r3,0(r4)	/* Load... */
+	add	r4,r4,r5
+	bdnz	1b
+
+	msync
+	mr	r4, r6
+	mtctr	r7
+
+1:	dcbf	0,r4		/* ...and flush. */
+	add	r4,r4,r5
+	bdnz	1b
+
+	/* restore HID0 */
+	mtspr	SPRN_HID0,r8
+	isync
+
+	wrtee r10
+
+	blr
+
+has_L2_cache:
+	/* skip L2 cache on P2040/P2040E as they have no L2 cache */
+	mfspr	r3, SPRN_SVR
+	/* shift right by 8 bits and clear E bit of SVR */
+	rlwinm	r4, r3, 24, ~0x800
+
+	lis	r3, SVR_P2040@h
+	ori	r3, r3, SVR_P2040@l
+	cmpw	r4, r3
+	beq	1f
+
+	li	r3, 1
+	blr
+1:
+	li	r3, 0
+	blr
+
+/* flush backside L2 cache */
+flush_backside_L2_cache:
+	mflr	r10
+	bl	has_L2_cache
+	mtlr	r10
+	cmpwi	r3, 0
+	beq	2f
+
+	/* Flush the L2 cache */
+	mfspr	r3, SPRN_L2CSR0
+	ori	r3, r3, L2CSR0_L2FL@l
+	msync
+	isync
+	mtspr	SPRN_L2CSR0,r3
+	isync
+
+	/* check if it is complete */
+1:	mfspr	r3,SPRN_L2CSR0
+	andi.	r3, r3, L2CSR0_L2FL@l
+	bne	1b
+2:
+	blr
+
+_GLOBAL(cpu_down_flush_e500v2)
+	mflr r0
+	bl	flush_dcache_L1
+	mtlr r0
+	blr
+
+_GLOBAL(cpu_down_flush_e500mc)
+_GLOBAL(cpu_down_flush_e5500)
+	mflr r0
+	bl	flush_dcache_L1
+	bl	flush_backside_L2_cache
+	mtlr r0
+	blr
+
+/* L1 Data Cache of e6500 contains no modified data, no flush is required */
+_GLOBAL(cpu_down_flush_e6500)
+	blr
diff --git a/arch/powerpc/kernel/cpu_setup_power.S b/arch/powerpc/kernel/cpu_setup_power.S
index 9c9b7411b28b..584e119fa8b0 100644
--- a/arch/powerpc/kernel/cpu_setup_power.S
+++ b/arch/powerpc/kernel/cpu_setup_power.S
@@ -15,6 +15,7 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
+#include <asm/book3s/64/mmu-hash.h>
 
 /* Entry: r3 = crap, r4 = ptr to cputable entry
  *
@@ -83,6 +84,39 @@ _GLOBAL(__restore_cpu_power8)
 	mtlr	r11
 	blr
 
+_GLOBAL(__setup_cpu_power9)
+	mflr	r11
+	bl	__init_FSCR
+	bl	__init_hvmode_206
+	mtlr	r11
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	mfspr	r3,SPRN_LPCR
+	ori	r3, r3, LPCR_PECEDH
+	bl	__init_LPCR
+	bl	__init_HFSCR
+	bl	__init_tlb_power9
+	mtlr	r11
+	blr
+
+_GLOBAL(__restore_cpu_power9)
+	mflr	r11
+	bl	__init_FSCR
+	mfmsr	r3
+	rldicl.	r0,r3,4,63
+	mtlr	r11
+	beqlr
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	mfspr   r3,SPRN_LPCR
+	ori	r3, r3, LPCR_PECEDH
+	bl	__init_LPCR
+	bl	__init_HFSCR
+	bl	__init_tlb_power9
+	mtlr	r11
+	blr
+
 __init_hvmode_206:
 	/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
 	mfmsr	r3
@@ -139,7 +173,7 @@ __init_HFSCR:
  * (invalidate by congruence class). P7 has 128 CCs., P8 has 512.
  */
 __init_tlb_power7:
-	li	r6,128
+	li	r6,POWER7_TLB_SETS
 	mtctr	r6
 	li	r7,0xc00	/* IS field = 0b11 */
 	ptesync
@@ -150,7 +184,18 @@ __init_tlb_power7:
 1:	blr
 
 __init_tlb_power8:
-	li	r6,512
+	li	r6,POWER8_TLB_SETS
+	mtctr	r6
+	li	r7,0xc00	/* IS field = 0b11 */
+	ptesync
+2:	tlbiel	r7
+	addi	r7,r7,0x1000
+	bdnz	2b
+	ptesync
+1:	blr
+
+__init_tlb_power9:
+	li	r6,POWER9_TLB_SETS_HASH
 	mtctr	r6
 	li	r7,0xc00	/* IS field = 0b11 */
 	ptesync
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 7d80bfdfb15e..6c662b8de90d 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -70,9 +70,12 @@ extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_power7(void);
 extern void __setup_cpu_power8(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_power8(void);
+extern void __setup_cpu_power9(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_power9(void);
 extern void __restore_cpu_a2(void);
 extern void __flush_tlb_power7(unsigned int action);
 extern void __flush_tlb_power8(unsigned int action);
+extern void __flush_tlb_power9(unsigned int action);
 extern long __machine_check_early_realmode_p7(struct pt_regs *regs);
 extern long __machine_check_early_realmode_p8(struct pt_regs *regs);
 #endif /* CONFIG_PPC64 */
@@ -116,6 +119,11 @@ extern void __restore_cpu_e6500(void);
 #define COMMON_USER_PA6T	(COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_HAS_ALTIVEC_COMP)
+#define COMMON_USER_POWER9	COMMON_USER_POWER8
+#define COMMON_USER2_POWER9	(COMMON_USER2_POWER8 | \
+				 PPC_FEATURE2_ARCH_3_00 | \
+				 PPC_FEATURE2_HAS_IEEE128)
+
 #ifdef CONFIG_PPC_BOOK3E_64
 #define COMMON_USER_BOOKE	(COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)
 #else
@@ -499,6 +507,25 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check_early	= __machine_check_early_realmode_p8,
 		.platform		= "power8",
 	},
+	{	/* Power9 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x004e0000,
+		.cpu_name		= "POWER9 (raw)",
+		.cpu_features		= CPU_FTRS_POWER9,
+		.cpu_user_features	= COMMON_USER_POWER9,
+		.cpu_user_features2	= COMMON_USER2_POWER9,
+		.mmu_features		= MMU_FTRS_POWER9,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.oprofile_cpu_type	= "ppc64/power9",
+		.oprofile_type		= PPC_OPROFILE_INVALID,
+		.cpu_setup		= __setup_cpu_power9,
+		.cpu_restore		= __restore_cpu_power9,
+		.flush_tlb		= __flush_tlb_power9,
+		.platform		= "power9",
+	},
 	{	/* Cell Broadband Engine */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00700000,
@@ -2023,6 +2050,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_e500v2,
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
+		.cpu_down_flush		= cpu_down_flush_e500v2,
 	},
 #else
 	{	/* e500mc */
@@ -2042,6 +2070,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.cpu_setup		= __setup_cpu_e500mc,
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce500mc",
+		.cpu_down_flush		= cpu_down_flush_e500mc,
 	},
 #endif /* CONFIG_PPC_E500MC */
 #endif /* CONFIG_PPC32 */
@@ -2066,6 +2095,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 #endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce5500",
+		.cpu_down_flush		= cpu_down_flush_e5500,
 	},
 	{	/* e6500 */
 		.pvr_mask		= 0xffff0000,
@@ -2088,6 +2118,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 #endif
 		.machine_check		= machine_check_e500mc,
 		.platform		= "ppce6500",
+		.cpu_down_flush		= cpu_down_flush_e6500,
 	},
 #endif /* CONFIG_PPC_E500MC */
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 40e4d4a27663..6544017eb90b 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -268,13 +268,6 @@ static void *eeh_dump_pe_log(void *data, void *flag)
 	struct eeh_dev *edev, *tmp;
 	size_t *plen = flag;
 
-	/* If the PE's config space is blocked, 0xFF's will be
-	 * returned. It's pointless to collect the log in this
-	 * case.
-	 */
-	if (pe->state & EEH_PE_CFG_BLOCKED)
-		return NULL;
-
 	eeh_pe_for_each_dev(pe, edev, tmp)
 		*plen += eeh_dump_dev_log(edev, pci_regs_buf + *plen,
 					  EEH_PCI_REGS_LOG_LEN - *plen);
@@ -677,7 +670,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function)
 	/* Check if the request is finished successfully */
 	if (active_flag) {
 		rc = eeh_ops->wait_state(pe, PCI_BUS_RESET_WAIT_MSEC);
-		if (rc <= 0)
+		if (rc < 0)
 			return rc;
 
 		if (rc & active_flag)
@@ -739,7 +732,7 @@ static void *eeh_restore_dev_state(void *data, void *userdata)
 }
 
 /**
- * pcibios_set_pcie_slot_reset - Set PCI-E reset state
+ * pcibios_set_pcie_reset_state - Set PCI-E reset state
  * @dev: pci device struct
  * @state: reset state to enter
  *
@@ -761,7 +754,8 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 	case pcie_deassert_reset:
 		eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
 		eeh_unfreeze_pe(pe, false);
-		eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+		if (!(pe->type & EEH_PE_VF))
+			eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
 		eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
 		eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
 		break;
@@ -769,14 +763,16 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 		eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
-		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
+		if (!(pe->type & EEH_PE_VF))
+			eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_HOT);
 		break;
 	case pcie_warm_reset:
 		eeh_pe_state_mark_with_cfg(pe, EEH_PE_ISOLATED);
 		eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
 		eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
-		eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
+		if (!(pe->type & EEH_PE_VF))
+			eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
 		eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
 		break;
 	default:
@@ -1243,6 +1239,14 @@ void eeh_remove_device(struct pci_dev *dev)
 	 * from the parent PE during the BAR resotre.
 	 */
 	edev->pdev = NULL;
+
+	/*
+	 * The flag "in_error" is used to trace EEH devices for VFs
+	 * in error state or not. It's set in eeh_report_error(). If
+	 * it's not set, eeh_report_{reset,resume}() won't be called
+	 * for the VF EEH device.
+	 */
+	edev->in_error = false;
 	dev->dev.archdata.edev = NULL;
 	if (!(edev->pe->state & EEH_PE_KEEP))
 		eeh_rmv_from_parent_pe(edev);
@@ -1537,6 +1541,17 @@ int eeh_pe_get_state(struct eeh_pe *pe)
 	if (!eeh_ops || !eeh_ops->get_state)
 		return -ENOENT;
 
+	/*
+	 * If the parent PE is owned by the host kernel and is undergoing
+	 * error recovery, we should return the PE state as temporarily
+	 * unavailable so that the error recovery on the guest is suspended
+	 * until the recovery completes on the host.
+	 */
+	if (pe->parent &&
+	    !(pe->state & EEH_PE_REMOVED) &&
+	    (pe->parent->state & (EEH_PE_ISOLATED | EEH_PE_RECOVERING)))
+		return EEH_PE_STATE_UNAVAIL;
+
 	result = eeh_ops->get_state(pe, NULL);
 	rst_active = !!(result & EEH_STATE_RESET_ACTIVE);
 	dma_en = !!(result & EEH_STATE_DMA_ENABLED);
diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c
index a1e86e172e3c..ddbcfab7efdf 100644
--- a/arch/powerpc/kernel/eeh_cache.c
+++ b/arch/powerpc/kernel/eeh_cache.c
@@ -195,8 +195,11 @@ static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
 		return;
 	}
 
-	/* Walk resources on this device, poke them into the tree */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+	/*
+	 * Walk resources on this device, poke the first 7 (6 normal BAR and 1
+	 * ROM BAR) into the tree.
+	 */
+	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
 		resource_size_t start = pci_resource_start(dev,i);
 		resource_size_t end = pci_resource_end(dev,i);
 		unsigned long flags = pci_resource_flags(dev,i);
@@ -222,10 +225,6 @@ void eeh_addr_cache_insert_dev(struct pci_dev *dev)
 {
 	unsigned long flags;
 
-	/* Ignore PCI bridges */
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
-		return;
-
 	spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags);
 	__eeh_addr_cache_insert_dev(dev);
 	spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags);
diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c
index aabba94ff9cb..7815095fe3d8 100644
--- a/arch/powerpc/kernel/eeh_dev.c
+++ b/arch/powerpc/kernel/eeh_dev.c
@@ -67,6 +67,7 @@ void *eeh_dev_init(struct pci_dn *pdn, void *data)
 	edev->pdn = pdn;
 	edev->phb = phb;
 	INIT_LIST_HEAD(&edev->list);
+	INIT_LIST_HEAD(&edev->rmv_list);
 
 	return NULL;
 }
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 80dfe8965df9..fb6207d2c604 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -34,6 +34,11 @@
 #include <asm/prom.h>
 #include <asm/rtas.h>
 
+struct eeh_rmv_data {
+	struct list_head edev_list;
+	int removed;
+};
+
 /**
  * eeh_pcid_name - Retrieve name of PCI device driver
  * @pdev: PCI device
@@ -190,7 +195,7 @@ static void *eeh_report_error(void *data, void *userdata)
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
-	if (!dev || eeh_dev_removed(edev))
+	if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe))
 		return NULL;
 	dev->error_state = pci_channel_io_frozen;
 
@@ -211,6 +216,7 @@ static void *eeh_report_error(void *data, void *userdata)
 	if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
 	if (*res == PCI_ERS_RESULT_NONE) *res = rc;
 
+	edev->in_error = true;
 	eeh_pcid_put(dev);
 	return NULL;
 }
@@ -231,7 +237,7 @@ static void *eeh_report_mmio_enabled(void *data, void *userdata)
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
-	if (!dev || eeh_dev_removed(edev))
+	if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe))
 		return NULL;
 
 	driver = eeh_pcid_get(dev);
@@ -271,7 +277,7 @@ static void *eeh_report_reset(void *data, void *userdata)
 	enum pci_ers_result rc, *res = userdata;
 	struct pci_driver *driver;
 
-	if (!dev || eeh_dev_removed(edev))
+	if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe))
 		return NULL;
 	dev->error_state = pci_channel_io_normal;
 
@@ -282,7 +288,8 @@ static void *eeh_report_reset(void *data, void *userdata)
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->slot_reset ||
-	    (edev->mode & EEH_DEV_NO_HANDLER)) {
+	    (edev->mode & EEH_DEV_NO_HANDLER) ||
+	    (!edev->in_error)) {
 		eeh_pcid_put(dev);
 		return NULL;
 	}
@@ -326,20 +333,23 @@ static void *eeh_report_resume(void *data, void *userdata)
 {
 	struct eeh_dev *edev = (struct eeh_dev *)data;
 	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	bool was_in_error;
 	struct pci_driver *driver;
 
-	if (!dev || eeh_dev_removed(edev))
+	if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe))
 		return NULL;
 	dev->error_state = pci_channel_io_normal;
 
 	driver = eeh_pcid_get(dev);
 	if (!driver) return NULL;
 
+	was_in_error = edev->in_error;
+	edev->in_error = false;
 	eeh_enable_irq(dev);
 
 	if (!driver->err_handler ||
 	    !driver->err_handler->resume ||
-	    (edev->mode & EEH_DEV_NO_HANDLER)) {
+	    (edev->mode & EEH_DEV_NO_HANDLER) || !was_in_error) {
 		edev->mode &= ~EEH_DEV_NO_HANDLER;
 		eeh_pcid_put(dev);
 		return NULL;
@@ -365,7 +375,7 @@ static void *eeh_report_failure(void *data, void *userdata)
 	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
 	struct pci_driver *driver;
 
-	if (!dev || eeh_dev_removed(edev))
+	if (!dev || eeh_dev_removed(edev) || eeh_pe_passed(edev->pe))
 		return NULL;
 	dev->error_state = pci_channel_io_perm_failure;
 
@@ -386,12 +396,40 @@ static void *eeh_report_failure(void *data, void *userdata)
 	return NULL;
 }
 
+static void *eeh_add_virt_device(void *data, void *userdata)
+{
+	struct pci_driver *driver;
+	struct eeh_dev *edev = (struct eeh_dev *)data;
+	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
+	struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
+	if (!(edev->physfn)) {
+		pr_warn("%s: EEH dev %04x:%02x:%02x.%01x not for VF\n",
+			__func__, edev->phb->global_number, pdn->busno,
+			PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+		return NULL;
+	}
+
+	driver = eeh_pcid_get(dev);
+	if (driver) {
+		eeh_pcid_put(dev);
+		if (driver->err_handler)
+			return NULL;
+	}
+
+#ifdef CONFIG_PPC_POWERNV
+	pci_iov_add_virtfn(edev->physfn, pdn->vf_index, 0);
+#endif
+	return NULL;
+}
+
 static void *eeh_rmv_device(void *data, void *userdata)
 {
 	struct pci_driver *driver;
 	struct eeh_dev *edev = (struct eeh_dev *)data;
 	struct pci_dev *dev = eeh_dev_to_pci_dev(edev);
-	int *removed = (int *)userdata;
+	struct eeh_rmv_data *rmv_data = (struct eeh_rmv_data *)userdata;
+	int *removed = rmv_data ? &rmv_data->removed : NULL;
 
 	/*
 	 * Actually, we should remove the PCI bridges as well.
@@ -400,7 +438,7 @@ static void *eeh_rmv_device(void *data, void *userdata)
 	 * support EEH. So we just care about PCI devices for
 	 * simplicity here.
 	 */
-	if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
+	if (!dev || (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE))
 		return NULL;
 
 	/*
@@ -416,10 +454,13 @@ static void *eeh_rmv_device(void *data, void *userdata)
 	driver = eeh_pcid_get(dev);
 	if (driver) {
 		eeh_pcid_put(dev);
-		if (driver->err_handler &&
+		if (removed &&
+		    eeh_pe_passed(edev->pe))
+			return NULL;
+		if (removed &&
+		    driver->err_handler &&
 		    driver->err_handler->error_detected &&
-		    driver->err_handler->slot_reset &&
-		    driver->err_handler->resume)
+		    driver->err_handler->slot_reset)
 			return NULL;
 	}
 
@@ -428,11 +469,29 @@ static void *eeh_rmv_device(void *data, void *userdata)
 		 pci_name(dev));
 	edev->bus = dev->bus;
 	edev->mode |= EEH_DEV_DISCONNECTED;
-	(*removed)++;
+	if (removed)
+		(*removed)++;
 
-	pci_lock_rescan_remove();
-	pci_stop_and_remove_bus_device(dev);
-	pci_unlock_rescan_remove();
+	if (edev->physfn) {
+#ifdef CONFIG_PPC_POWERNV
+		struct pci_dn *pdn = eeh_dev_to_pdn(edev);
+
+		pci_iov_remove_virtfn(edev->physfn, pdn->vf_index, 0);
+		edev->pdev = NULL;
+
+		/*
+		 * We have to set the VF PE number to invalid one, which is
+		 * required to plug the VF successfully.
+		 */
+		pdn->pe_number = IODA_INVALID_PE;
+#endif
+		if (rmv_data)
+			list_add(&edev->rmv_list, &rmv_data->edev_list);
+	} else {
+		pci_lock_rescan_remove();
+		pci_stop_and_remove_bus_device(dev);
+		pci_unlock_rescan_remove();
+	}
 
 	return NULL;
 }
@@ -546,11 +605,13 @@ int eeh_pe_reset_and_recover(struct eeh_pe *pe)
  * During the reset, udev might be invoked because those affected
  * PCI devices will be removed and then added.
  */
-static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
+static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus,
+				struct eeh_rmv_data *rmv_data)
 {
 	struct pci_bus *frozen_bus = eeh_pe_bus_get(pe);
 	struct timeval tstamp;
-	int cnt, rc, removed = 0;
+	int cnt, rc;
+	struct eeh_dev *edev;
 
 	/* pcibios will clear the counter; save the value */
 	cnt = pe->freeze_count;
@@ -564,11 +625,16 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	 */
 	eeh_pe_state_mark(pe, EEH_PE_KEEP);
 	if (bus) {
-		pci_lock_rescan_remove();
-		pcibios_remove_pci_devices(bus);
-		pci_unlock_rescan_remove();
+		if (pe->type & EEH_PE_VF) {
+			eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
+		} else {
+			eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
+			pci_lock_rescan_remove();
+			pcibios_remove_pci_devices(bus);
+			pci_unlock_rescan_remove();
+		}
 	} else if (frozen_bus) {
-		eeh_pe_dev_traverse(pe, eeh_rmv_device, &removed);
+		eeh_pe_dev_traverse(pe, eeh_rmv_device, &rmv_data);
 	}
 
 	/*
@@ -590,16 +656,10 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 	eeh_ops->configure_bridge(pe);
 	eeh_pe_restore_bars(pe);
 
-	/*
-	 * If it's PHB PE, the frozen state on all available PEs should have
-	 * been cleared by the PHB reset. Otherwise, we unfreeze the PE and its
-	 * child PEs because they might be in frozen state.
-	 */
-	if (!(pe->type & EEH_PE_PHB)) {
-		rc = eeh_clear_pe_frozen_state(pe, false);
-		if (rc)
-			return rc;
-	}
+	/* Clear frozen state */
+	rc = eeh_clear_pe_frozen_state(pe, false);
+	if (rc)
+		return rc;
 
 	/* Give the system 5 seconds to finish running the user-space
 	 * hotplug shutdown scripts, e.g. ifdown for ethernet.  Yes,
@@ -616,14 +676,22 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 		 * PE. We should disconnect it so the binding can be
 		 * rebuilt when adding PCI devices.
 		 */
+		edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
 		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
-		pcibios_add_pci_devices(bus);
-	} else if (frozen_bus && removed) {
+		if (pe->type & EEH_PE_VF)
+			eeh_add_virt_device(edev, NULL);
+		else
+			pcibios_add_pci_devices(bus);
+	} else if (frozen_bus && rmv_data->removed) {
 		pr_info("EEH: Sleep 5s ahead of partial hotplug\n");
 		ssleep(5);
 
+		edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
 		eeh_pe_traverse(pe, eeh_pe_detach_dev, NULL);
-		pcibios_add_pci_devices(frozen_bus);
+		if (pe->type & EEH_PE_VF)
+			eeh_add_virt_device(edev, NULL);
+		else
+			pcibios_add_pci_devices(frozen_bus);
 	}
 	eeh_pe_state_clear(pe, EEH_PE_KEEP);
 
@@ -642,8 +710,10 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus)
 static void eeh_handle_normal_event(struct eeh_pe *pe)
 {
 	struct pci_bus *frozen_bus;
+	struct eeh_dev *edev, *tmp;
 	int rc = 0;
 	enum pci_ers_result result = PCI_ERS_RESULT_NONE;
+	struct eeh_rmv_data rmv_data = {LIST_HEAD_INIT(rmv_data.edev_list), 0};
 
 	frozen_bus = eeh_pe_bus_get(pe);
 	if (!frozen_bus) {
@@ -698,7 +768,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 	 */
 	if (result == PCI_ERS_RESULT_NONE) {
 		pr_info("EEH: Reset with hotplug activity\n");
-		rc = eeh_reset_device(pe, frozen_bus);
+		rc = eeh_reset_device(pe, frozen_bus, NULL);
 		if (rc) {
 			pr_warn("%s: Unable to reset, err=%d\n",
 				__func__, rc);
@@ -750,7 +820,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 	/* If any device called out for a reset, then reset the slot */
 	if (result == PCI_ERS_RESULT_NEED_RESET) {
 		pr_info("EEH: Reset without hotplug activity\n");
-		rc = eeh_reset_device(pe, NULL);
+		rc = eeh_reset_device(pe, NULL, &rmv_data);
 		if (rc) {
 			pr_warn("%s: Cannot reset, err=%d\n",
 				__func__, rc);
@@ -770,6 +840,15 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
 		goto hard_fail;
 	}
 
+	/*
+	 * For those hot removed VFs, we should add back them after PF get
+	 * recovered properly.
+	 */
+	list_for_each_entry_safe(edev, tmp, &rmv_data.edev_list, rmv_list) {
+		eeh_add_virt_device(edev, NULL);
+		list_del(&edev->rmv_list);
+	}
+
 	/* Tell all device drivers that they can resume operations */
 	pr_info("EEH: Notify device driver to resume\n");
 	eeh_pe_dev_traverse(pe, eeh_report_resume, NULL);
@@ -809,11 +888,17 @@ perm_error:
 	 * the their PCI config any more.
 	 */
 	if (frozen_bus) {
-		eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+		if (pe->type & EEH_PE_VF) {
+			eeh_pe_dev_traverse(pe, eeh_rmv_device, NULL);
+			eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
+		} else {
+			eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
+			eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED);
 
-		pci_lock_rescan_remove();
-		pcibios_remove_pci_devices(frozen_bus);
-		pci_unlock_rescan_remove();
+			pci_lock_rescan_remove();
+			pcibios_remove_pci_devices(frozen_bus);
+			pci_unlock_rescan_remove();
+		}
 	}
 }
 
@@ -892,6 +977,7 @@ static void eeh_handle_special_event(void)
 					continue;
 
 				/* Notify all devices to be down */
+				eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
 				bus = eeh_pe_bus_get(phb_pe);
 				eeh_pe_dev_traverse(pe,
 					eeh_report_failure, NULL);
diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 8654cb166c19..eea48d8baf49 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -299,7 +299,10 @@ static struct eeh_pe *eeh_pe_get_parent(struct eeh_dev *edev)
 	 * EEH device already having associated PE, but
 	 * the direct parent EEH device doesn't have yet.
 	 */
-	pdn = pdn ? pdn->parent : NULL;
+	if (edev->physfn)
+		pdn = pci_get_pdn(edev->physfn);
+	else
+		pdn = pdn ? pdn->parent : NULL;
 	while (pdn) {
 		/* We're poking out of PCI territory */
 		parent = pdn_to_eeh_dev(pdn);
@@ -382,7 +385,10 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 	}
 
 	/* Create a new EEH PE */
-	pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE);
+	if (edev->physfn)
+		pe = eeh_pe_alloc(edev->phb, EEH_PE_VF);
+	else
+		pe = eeh_pe_alloc(edev->phb, EEH_PE_DEVICE);
 	if (!pe) {
 		pr_err("%s: out of memory!\n", __func__);
 		return -ENOMEM;
@@ -883,32 +889,29 @@ void eeh_pe_restore_bars(struct eeh_pe *pe)
 const char *eeh_pe_loc_get(struct eeh_pe *pe)
 {
 	struct pci_bus *bus = eeh_pe_bus_get(pe);
-	struct device_node *dn = pci_bus_to_OF_node(bus);
+	struct device_node *dn;
 	const char *loc = NULL;
 
-	if (!dn)
-		goto out;
+	while (bus) {
+		dn = pci_bus_to_OF_node(bus);
+		if (!dn) {
+			bus = bus->parent;
+			continue;
+		}
 
-	/* PHB PE or root PE ? */
-	if (pci_is_root_bus(bus)) {
-		loc = of_get_property(dn, "ibm,loc-code", NULL);
-		if (!loc)
+		if (pci_is_root_bus(bus))
 			loc = of_get_property(dn, "ibm,io-base-loc-code", NULL);
+		else
+			loc = of_get_property(dn, "ibm,slot-location-code",
+					      NULL);
+
 		if (loc)
-			goto out;
+			return loc;
 
-		/* Check the root port */
-		dn = dn->child;
-		if (!dn)
-			goto out;
+		bus = bus->parent;
 	}
 
-	loc = of_get_property(dn, "ibm,loc-code", NULL);
-	if (!loc)
-		loc = of_get_property(dn, "ibm,slot-location-code", NULL);
-
-out:
-	return loc ? loc : "N/A";
+	return "N/A";
 }
 
 /**
@@ -923,25 +926,21 @@ out:
  */
 struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
 {
-	struct pci_bus *bus = NULL;
 	struct eeh_dev *edev;
 	struct pci_dev *pdev;
 
-	if (pe->type & EEH_PE_PHB) {
-		bus = pe->phb->bus;
-	} else if (pe->type & EEH_PE_BUS ||
-		   pe->type & EEH_PE_DEVICE) {
-		if (pe->bus) {
-			bus = pe->bus;
-			goto out;
-		}
+	if (pe->type & EEH_PE_PHB)
+		return pe->phb->bus;
 
-		edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
-		pdev = eeh_dev_to_pci_dev(edev);
-		if (pdev)
-			bus = pdev->bus;
-	}
+	/* The primary bus might be cached during probe time */
+	if (pe->state & EEH_PE_PRI_BUS)
+		return pe->bus;
+
+	/* Retrieve the parent PCI bus of first (top) PCI device */
+	edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, list);
+	pdev = eeh_dev_to_pci_dev(edev);
+	if (pdev)
+		return pdev->bus;
 
-out:
-	return bus;
+	return NULL;
 }
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index a94f155db78e..9916d150b28c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -210,7 +210,29 @@ system_call:			/* label this so stack traces look sane */
 	li	r11,-MAX_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
 	bne-	syscall_exit_work
-	cmpld	r3,r11
+
+	andi.	r0,r8,MSR_FP
+	beq 2f
+#ifdef CONFIG_ALTIVEC
+	andis.	r0,r8,MSR_VEC@h
+	bne	3f
+#endif
+2:	addi    r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_BOOK3S
+	mtmsrd	r10,1		/* Restore RI */
+#endif
+	bl	restore_math
+#ifdef CONFIG_PPC_BOOK3S
+	ld	r10,PACAKMSR(r13)
+	li	r9,MSR_RI
+	andc	r11,r10,r9 /* Re-clear RI */
+	mtmsrd	r11,1
+#endif
+	ld	r8,_MSR(r1)
+	ld	r3,RESULT(r1)
+	li	r11,-MAX_ERRNO
+
+3:	cmpld	r3,r11
 	ld	r5,_CCR(r1)
 	bge-	syscall_error
 .Lsyscall_error_cont:
@@ -223,7 +245,11 @@ END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 
 	beq-	1f
 	ACCOUNT_CPU_USER_EXIT(r11, r12)
-	HMT_MEDIUM_LOW_HAS_PPR
+
+BEGIN_FTR_SECTION
+	HMT_MEDIUM_LOW
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+
 	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
 1:	ld	r2,GPR2(r1)
 	ld	r1,GPR1(r1)
@@ -312,7 +338,13 @@ syscall_exit_work:
 	subi	r12,r12,TI_FLAGS
 
 4:	/* Anything else left to do? */
-	SET_DEFAULT_THREAD_PPR(r3, r10)		/* Set thread.ppr = 3 */
+BEGIN_FTR_SECTION
+	lis	r3,INIT_PPR@highest	/* Set thread.ppr = 3 */
+	ld	r10,PACACURRENT(r13)
+	sldi	r3,r3,32	/* bits 11-13 are used for ppr */
+	std	r3,TASKTHREADPPR(r10)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+
 	andi.	r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
 	beq	ret_from_except_lite
 
@@ -452,43 +484,11 @@ _GLOBAL(_switch)
 	/* r3-r13 are caller saved -- Cort */
 	SAVE_8GPRS(14, r1)
 	SAVE_10GPRS(22, r1)
-	mflr	r20		/* Return to switch caller */
-	mfmsr	r22
-	li	r0, MSR_FP
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	oris	r0,r0,MSR_VSX@h	/* Disable VSX */
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
-	mfspr	r24,SPRN_VRSAVE	/* save vrsave register value */
-	std	r24,THREAD_VRSAVE(r3)
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-	and.	r0,r0,r22
-	beq+	1f
-	andc	r22,r22,r0
-	MTMSRD(r22)
-	isync
-1:	std	r20,_NIP(r1)
+	std	r0,_NIP(r1)	/* Return to switch caller */
 	mfcr	r23
 	std	r23,_CCR(r1)
 	std	r1,KSP(r3)	/* Set old stack pointer */
 
-#ifdef CONFIG_PPC_BOOK3S_64
-BEGIN_FTR_SECTION
-	/* Event based branch registers */
-	mfspr	r0, SPRN_BESCR
-	std	r0, THREAD_BESCR(r3)
-	mfspr	r0, SPRN_EBBHR
-	std	r0, THREAD_EBBHR(r3)
-	mfspr	r0, SPRN_EBBRR
-	std	r0, THREAD_EBBRR(r3)
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
-#endif
-
 #ifdef CONFIG_SMP
 	/* We need a sync somewhere here to make sure that if the
 	 * previous task gets rescheduled on another CPU, it sees all
@@ -576,47 +576,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	mr	r1,r8		/* start using new stack pointer */
 	std	r7,PACAKSAVE(r13)
 
-#ifdef CONFIG_PPC_BOOK3S_64
-BEGIN_FTR_SECTION
-	/* Event based branch registers */
-	ld	r0, THREAD_BESCR(r4)
-	mtspr	SPRN_BESCR, r0
-	ld	r0, THREAD_EBBHR(r4)
-	mtspr	SPRN_EBBHR, r0
-	ld	r0, THREAD_EBBRR(r4)
-	mtspr	SPRN_EBBRR, r0
-
-	ld	r0,THREAD_TAR(r4)
-	mtspr	SPRN_TAR,r0
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
-#endif
-
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	ld	r0,THREAD_VRSAVE(r4)
-	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_PPC64
-BEGIN_FTR_SECTION
-	lwz	r6,THREAD_DSCR_INHERIT(r4)
-	ld	r0,THREAD_DSCR(r4)
-	cmpwi	r6,0
-	bne	1f
-	ld	r0,PACA_DSCR_DEFAULT(r13)
-1:
-BEGIN_FTR_SECTION_NESTED(70)
-	mfspr	r8, SPRN_FSCR
-	rldimi	r8, r6, FSCR_DSCR_LG, (63 - FSCR_DSCR_LG)
-	mtspr	SPRN_FSCR, r8
-END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
-	cmpd	r0,r25
-	beq	2f
-	mtspr	SPRN_DSCR,r0
-2:
-END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
-#endif
-
 	ld	r6,_CCR(r1)
 	mtcrf	0xFF,r6
 
@@ -665,8 +624,8 @@ _GLOBAL(ret_from_except_lite)
 
 	/* Check current_thread_info()->flags */
 	andi.	r0,r4,_TIF_USER_WORK_MASK
-#ifdef CONFIG_PPC_BOOK3E
 	bne	1f
+#ifdef CONFIG_PPC_BOOK3E
 	/*
 	 * Check to see if the dbcr0 register is set up to debug.
 	 * Use the internal debug mode bit to do this.
@@ -681,7 +640,9 @@ _GLOBAL(ret_from_except_lite)
 	mtspr	SPRN_DBSR,r10
 	b	restore
 #else
-	beq	restore
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	restore_math
+	b	restore
 #endif
 1:	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	2f
@@ -1206,8 +1167,12 @@ _GLOBAL(enter_prom)
 #ifdef CONFIG_DYNAMIC_FTRACE
 _GLOBAL(mcount)
 _GLOBAL(_mcount)
-	blr
+	mflr	r12
+	mtctr	r12
+	mtlr	r0
+	bctr
 
+#ifndef CC_USING_MPROFILE_KERNEL
 _GLOBAL_TOC(ftrace_caller)
 	/* Taken from output of objdump from lib64/glibc */
 	mflr	r3
@@ -1229,6 +1194,115 @@ _GLOBAL(ftrace_graph_stub)
 	ld	r0, 128(r1)
 	mtlr	r0
 	addi	r1, r1, 112
+
+#else /* CC_USING_MPROFILE_KERNEL */
+/*
+ *
+ * ftrace_caller() is the function that replaces _mcount() when ftrace is
+ * active.
+ *
+ * We arrive here after a function A calls function B, and we are the trace
+ * function for B. When we enter r1 points to A's stack frame, B has not yet
+ * had a chance to allocate one yet.
+ *
+ * Additionally r2 may point either to the TOC for A, or B, depending on
+ * whether B did a TOC setup sequence before calling us.
+ *
+ * On entry the LR points back to the _mcount() call site, and r0 holds the
+ * saved LR as it was on entry to B, ie. the original return address at the
+ * call site in A.
+ *
+ * Our job is to save the register state into a struct pt_regs (on the stack)
+ * and then arrange for the ftrace function to be called.
+ */
+_GLOBAL(ftrace_caller)
+	/* Save the original return address in A's stack frame */
+	std	r0,LRSAVE(r1)
+
+	/* Create our stack frame + pt_regs */
+	stdu	r1,-SWITCH_FRAME_SIZE(r1)
+
+	/* Save all gprs to pt_regs */
+	SAVE_8GPRS(0,r1)
+	SAVE_8GPRS(8,r1)
+	SAVE_8GPRS(16,r1)
+	SAVE_8GPRS(24,r1)
+
+	/* Load special regs for save below */
+	mfmsr   r8
+	mfctr   r9
+	mfxer   r10
+	mfcr	r11
+
+	/* Get the _mcount() call site out of LR */
+	mflr	r7
+	/* Save it as pt_regs->nip & pt_regs->link */
+	std     r7, _NIP(r1)
+	std     r7, _LINK(r1)
+
+	/* Save callee's TOC in the ABI compliant location */
+	std	r2, 24(r1)
+	ld	r2,PACATOC(r13)	/* get kernel TOC in r2 */
+
+	addis	r3,r2,function_trace_op@toc@ha
+	addi	r3,r3,function_trace_op@toc@l
+	ld	r5,0(r3)
+
+	/* Calculate ip from nip-4 into r3 for call below */
+	subi    r3, r7, MCOUNT_INSN_SIZE
+
+	/* Put the original return address in r4 as parent_ip */
+	mr	r4, r0
+
+	/* Save special regs */
+	std     r8, _MSR(r1)
+	std     r9, _CTR(r1)
+	std     r10, _XER(r1)
+	std     r11, _CCR(r1)
+
+	/* Load &pt_regs in r6 for call below */
+	addi    r6, r1 ,STACK_FRAME_OVERHEAD
+
+	/* ftrace_call(r3, r4, r5, r6) */
+.globl ftrace_call
+ftrace_call:
+	bl	ftrace_stub
+	nop
+
+	/* Load ctr with the possibly modified NIP */
+	ld	r3, _NIP(r1)
+	mtctr	r3
+
+	/* Restore gprs */
+	REST_8GPRS(0,r1)
+	REST_8GPRS(8,r1)
+	REST_8GPRS(16,r1)
+	REST_8GPRS(24,r1)
+
+	/* Restore callee's TOC */
+	ld	r2, 24(r1)
+
+	/* Pop our stack frame */
+	addi r1, r1, SWITCH_FRAME_SIZE
+
+	/* Restore original LR for return to B */
+	ld	r0, LRSAVE(r1)
+	mtlr	r0
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	stdu	r1, -112(r1)
+.globl ftrace_graph_call
+ftrace_graph_call:
+	b	ftrace_graph_stub
+_GLOBAL(ftrace_graph_stub)
+	addi	r1, r1, 112
+#endif
+
+	ld	r0,LRSAVE(r1)	/* restore callee's lr at _mcount site */
+	mtlr	r0
+	bctr			/* jump after _mcount site */
+#endif /* CC_USING_MPROFILE_KERNEL */
+
 _GLOBAL(ftrace_stub)
 	blr
 #else
@@ -1261,6 +1335,7 @@ _GLOBAL(ftrace_stub)
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifndef CC_USING_MPROFILE_KERNEL
 _GLOBAL(ftrace_graph_caller)
 	/* load r4 with local address */
 	ld	r4, 128(r1)
@@ -1285,6 +1360,56 @@ _GLOBAL(ftrace_graph_caller)
 	addi	r1, r1, 112
 	blr
 
+#else /* CC_USING_MPROFILE_KERNEL */
+_GLOBAL(ftrace_graph_caller)
+	/* with -mprofile-kernel, parameter regs are still alive at _mcount */
+	std	r10, 104(r1)
+	std	r9, 96(r1)
+	std	r8, 88(r1)
+	std	r7, 80(r1)
+	std	r6, 72(r1)
+	std	r5, 64(r1)
+	std	r4, 56(r1)
+	std	r3, 48(r1)
+
+	/* Save callee's TOC in the ABI compliant location */
+	std	r2, 24(r1)
+	ld	r2, PACATOC(r13)	/* get kernel TOC in r2 */
+
+	mfctr	r4		/* ftrace_caller has moved local addr here */
+	std	r4, 40(r1)
+	mflr	r3		/* ftrace_caller has restored LR from stack */
+	subi	r4, r4, MCOUNT_INSN_SIZE
+
+	bl	prepare_ftrace_return
+	nop
+
+	/*
+	 * prepare_ftrace_return gives us the address we divert to.
+	 * Change the LR to this.
+	 */
+	mtlr	r3
+
+	ld	r0, 40(r1)
+	mtctr	r0
+	ld	r10, 104(r1)
+	ld	r9, 96(r1)
+	ld	r8, 88(r1)
+	ld	r7, 80(r1)
+	ld	r6, 72(r1)
+	ld	r5, 64(r1)
+	ld	r4, 56(r1)
+	ld	r3, 48(r1)
+
+	/* Restore callee's TOC */
+	ld	r2, 24(r1)
+
+	addi	r1, r1, 112
+	mflr	r0
+	std	r0, LRSAVE(r1)
+	bctr
+#endif /* CC_USING_MPROFILE_KERNEL */
+
 _GLOBAL(return_to_handler)
 	/* need to save return values */
 	std	r4,  -32(r1)
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 0a0399c2af11..7716cebf4b8e 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -96,7 +96,6 @@ __start_interrupts:
 
 	.globl system_reset_pSeries;
 system_reset_pSeries:
-	HMT_MEDIUM_PPR_DISCARD
 	SET_SCRATCH0(r13)
 #ifdef CONFIG_PPC_P7_NAP
 BEGIN_FTR_SECTION
@@ -164,7 +163,6 @@ machine_check_pSeries_1:
 	 * some code path might still want to branch into the original
 	 * vector
 	 */
-	HMT_MEDIUM_PPR_DISCARD
 	SET_SCRATCH0(r13)		/* save r13 */
 #ifdef CONFIG_PPC_P7_NAP
 BEGIN_FTR_SECTION
@@ -199,7 +197,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
 	. = 0x300
 	.globl data_access_pSeries
 data_access_pSeries:
-	HMT_MEDIUM_PPR_DISCARD
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD,
 				 KVMTEST, 0x300)
@@ -207,7 +204,6 @@ data_access_pSeries:
 	. = 0x380
 	.globl data_access_slb_pSeries
 data_access_slb_pSeries:
-	HMT_MEDIUM_PPR_DISCARD
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXSLB)
 	EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380)
@@ -234,15 +230,14 @@ data_access_slb_pSeries:
 	bctr
 #endif
 
-	STD_EXCEPTION_PSERIES(0x400, 0x400, instruction_access)
+	STD_EXCEPTION_PSERIES(0x400, instruction_access)
 
 	. = 0x480
 	.globl instruction_access_slb_pSeries
 instruction_access_slb_pSeries:
-	HMT_MEDIUM_PPR_DISCARD
 	SET_SCRATCH0(r13)
 	EXCEPTION_PROLOG_0(PACA_EXSLB)
-	EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480)
+	EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x480)
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
 #ifdef __DISABLED__
@@ -269,25 +264,24 @@ instruction_access_slb_pSeries:
 	.globl hardware_interrupt_hv;
 hardware_interrupt_pSeries:
 hardware_interrupt_hv:
-	HMT_MEDIUM_PPR_DISCARD
 	BEGIN_FTR_SECTION
 		_MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt,
 					    EXC_HV, SOFTEN_TEST_HV)
 		KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x502)
 	FTR_SECTION_ELSE
 		_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt,
-					    EXC_STD, SOFTEN_TEST_HV_201)
+					    EXC_STD, SOFTEN_TEST_PR)
 		KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500)
 	ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
 
-	STD_EXCEPTION_PSERIES(0x600, 0x600, alignment)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x600)
+	STD_EXCEPTION_PSERIES(0x600, alignment)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x600)
 
-	STD_EXCEPTION_PSERIES(0x700, 0x700, program_check)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x700)
+	STD_EXCEPTION_PSERIES(0x700, program_check)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x700)
 
-	STD_EXCEPTION_PSERIES(0x800, 0x800, fp_unavailable)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800)
+	STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x800)
 
 	. = 0x900
 	.globl decrementer_pSeries
@@ -297,10 +291,10 @@ decrementer_pSeries:
 	STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
 
 	MASKABLE_EXCEPTION_PSERIES(0xa00, 0xa00, doorbell_super)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xa00)
 
-	STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xb00)
+	STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xb00)
 
 	. = 0xc00
 	.globl	system_call_pSeries
@@ -331,8 +325,8 @@ system_call_pSeries:
 	SYSCALL_PSERIES_3
 	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
 
-	STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xd00)
+	STD_EXCEPTION_PSERIES(0xd00, single_step)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xd00)
 
 	/* At 0xe??? we have a bunch of hypervisor exceptions, we branch
 	 * out of line to handle them
@@ -407,13 +401,12 @@ hv_facility_unavailable_trampoline:
 	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
 #endif /* CONFIG_CBE_RAS */
 
-	STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
-	KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
+	STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
 
 	. = 0x1500
 	.global denorm_exception_hv
 denorm_exception_hv:
-	HMT_MEDIUM_PPR_DISCARD
 	mtspr	SPRN_SPRG_HSCRATCH0,r13
 	EXCEPTION_PROLOG_0(PACA_EXGEN)
 	EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
@@ -435,8 +428,8 @@ denorm_exception_hv:
 	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
 #endif /* CONFIG_CBE_RAS */
 
-	STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x1700)
+	STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x1700)
 
 #ifdef CONFIG_CBE_RAS
 	STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
@@ -527,7 +520,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 machine_check_pSeries:
 	.globl machine_check_fwnmi
 machine_check_fwnmi:
-	HMT_MEDIUM_PPR_DISCARD
 	SET_SCRATCH0(r13)		/* save r13 */
 	EXCEPTION_PROLOG_0(PACA_EXMC)
 machine_check_pSeries_0:
@@ -536,9 +528,9 @@ machine_check_pSeries_0:
 	KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200)
 	KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
 	KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x400)
-	KVM_HANDLER_PR(PACA_EXSLB, EXC_STD, 0x480)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x900)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x400)
+	KVM_HANDLER(PACA_EXSLB, EXC_STD, 0x480)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x900)
 	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x982)
 
 #ifdef CONFIG_PPC_DENORMALISATION
@@ -621,13 +613,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 
 	/* moved from 0xf00 */
 	STD_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf00)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf00)
 	STD_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf20)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf20)
 	STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf40)
 	STD_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
-	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf60)
+	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xf60)
 	STD_EXCEPTION_HV_OOL(0xf82, facility_unavailable)
 	KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xf82)
 
@@ -711,7 +703,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
 	.globl system_reset_fwnmi
       .align 7
 system_reset_fwnmi:
-	HMT_MEDIUM_PPR_DISCARD
 	SET_SCRATCH0(r13)		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
 				 NOTEST, 0x100)
@@ -1556,29 +1547,19 @@ do_hash_page:
 	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
 	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
 	bne	77f			/* then don't call hash_page now */
-	/*
-	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
-	 * accessing a userspace segment (even from the kernel). We assume
-	 * kernel addresses always have the high bit set.
-	 */
-	rlwinm	r4,r4,32-25+9,31-9,31-9	/* DSISR_STORE -> _PAGE_RW */
-	rotldi	r0,r3,15		/* Move high bit into MSR_PR posn */
-	orc	r0,r12,r0		/* MSR_PR | ~high_bit */
-	rlwimi	r4,r0,32-13,30,30	/* becomes _PAGE_USER access bit */
-	ori	r4,r4,1			/* add _PAGE_PRESENT */
-	rlwimi	r4,r5,22+2,31-2,31-2	/* Set _PAGE_EXEC if trap is 0x400 */
 
 	/*
 	 * r3 contains the faulting address
-	 * r4 contains the required access permissions
+	 * r4 msr
 	 * r5 contains the trap number
 	 * r6 contains dsisr
 	 *
 	 * at return r3 = 0 for success, 1 for page fault, negative for error
 	 */
+        mr 	r4,r12
 	ld      r6,_DSISR(r1)
-	bl	hash_page		/* build HPTE if possible */
-	cmpdi	r3,0			/* see if hash_page succeeded */
+	bl	__hash_page		/* build HPTE if possible */
+        cmpdi	r3,0			/* see if __hash_page succeeded */
 
 	/* Success */
 	beq	fast_exc_return_irq	/* Return from exception on success */
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 26d091a1a54c..3cb3b02a13dd 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -415,7 +415,7 @@ void crash_fadump(struct pt_regs *regs, const char *str)
 	else
 		ppc_save_regs(&fdh->regs);
 
-	fdh->cpu_online_mask = *cpu_online_mask;
+	fdh->online_mask = *cpu_online_mask;
 
 	/* Call ibm,os-term rtas call to trigger firmware assisted dump */
 	rtas_os_term((char *)str);
@@ -646,7 +646,7 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm)
 		}
 		/* Lower 4 bytes of reg_value contains logical cpu id */
 		cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
-		if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
+		if (fdh && !cpumask_test_cpu(cpu, &fdh->online_mask)) {
 			SKIP_TO_NEXT_CPU(reg_entry);
 			continue;
 		}
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 9ad236e5d2c9..15da2b5df85e 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -73,30 +73,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	MTFSF_L(fr0)
 	REST_32FPVSRS(0, R4, R7)
 
-	/* FP/VSX off again */
-	MTMSRD(r6)
-	SYNC
-
 	blr
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
 /*
- * Enable use of the FPU, and VSX if possible, for the caller.
- */
-_GLOBAL(fp_enable)
-	mfmsr	r3
-	ori	r3,r3,MSR_FP
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	oris	r3,r3,MSR_VSX@h
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	SYNC
-	MTMSRD(r3)
-	isync			/* (not necessary for arch 2.02 and later) */
-	blr
-
-/*
  * Load state from memory into FP registers including FPSCR.
  * Assumes the caller has enabled FP in the MSR.
  */
@@ -136,31 +116,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	SYNC
 	MTMSRD(r5)			/* enable use of fpu now */
 	isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_fpu in switch_to.
- */
-#ifndef CONFIG_SMP
-	LOAD_REG_ADDRBASE(r3, last_task_used_math)
-	toreal(r3)
-	PPC_LL	r4,ADDROFF(last_task_used_math)(r3)
-	PPC_LCMPI	0,r4,0
-	beq	1f
-	toreal(r4)
-	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	addi	r10,r4,THREAD_FPSTATE
-	SAVE_32FPVSRS(0, R5, R10)
-	mffs	fr0
-	stfd	fr0,FPSTATE_FPSCR(r10)
-	PPC_LL	r5,PT_REGS(r4)
-	toreal(r5)
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	li	r10,MSR_FP|MSR_FE0|MSR_FE1
-	andc	r4,r4,r10		/* disable FP for previous task */
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
 	/* enable use of FP after return */
 #ifdef CONFIG_PPC32
 	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
@@ -175,66 +130,33 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	or	r12,r12,r4
 	std	r12,_MSR(r1)
 #endif
+	/* Don't care if r4 overflows, this is desired behaviour */
+	lbz	r4,THREAD_LOAD_FP(r5)
+	addi	r4,r4,1
+	stb	r4,THREAD_LOAD_FP(r5)
 	addi	r10,r5,THREAD_FPSTATE
 	lfd	fr0,FPSTATE_FPSCR(r10)
 	MTFSF_L(fr0)
 	REST_32FPVSRS(0, R4, R10)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_math)(r3)
-#endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
 	blr
 
 /*
- * giveup_fpu(tsk)
- * Disable FP for the task given as the argument,
- * and save the floating-point registers in its thread_struct.
+ * save_fpu(tsk)
+ * Save the floating-point registers in its thread_struct.
  * Enables the FPU for use in the kernel on return.
  */
-_GLOBAL(giveup_fpu)
-	mfmsr	r5
-	ori	r5,r5,MSR_FP
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	oris	r5,r5,MSR_VSX@h
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	SYNC_601
-	ISYNC_601
-	MTMSRD(r5)			/* enable use of fpu now */
-	SYNC_601
-	isync
-	PPC_LCMPI	0,r3,0
-	beqlr-				/* if no previous owner, done */
+_GLOBAL(save_fpu)
 	addi	r3,r3,THREAD	        /* want THREAD of task */
 	PPC_LL	r6,THREAD_FPSAVEAREA(r3)
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r6,0
 	bne	2f
 	addi	r6,r3,THREAD_FPSTATE
-2:	PPC_LCMPI	0,r5,0
-	SAVE_32FPVSRS(0, R4, R6)
+2:	SAVE_32FPVSRS(0, R4, R6)
 	mffs	fr0
 	stfd	fr0,FPSTATE_FPSCR(r6)
-	beq	1f
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	li	r3,MSR_FP|MSR_FE0|MSR_FE1
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	oris	r3,r3,MSR_VSX@h
-END_FTR_SECTION_IFSET(CPU_FTR_VSX)
-#endif
-	andc	r4,r4,r3		/* disable FP for previous task */
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	LOAD_REG_ADDRBASE(r4,last_task_used_math)
-	PPC_STL	r5,ADDROFF(last_task_used_math)(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 /*
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 44d4d8eb3c85..9dac18dabd03 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -61,8 +61,11 @@ ftrace_modify_code(unsigned long ip, unsigned int old, unsigned int new)
 		return -EFAULT;
 
 	/* Make sure it is what we expect it to be */
-	if (replaced != old)
+	if (replaced != old) {
+		pr_err("%p: replaced (%#x) != old (%#x)",
+		(void *)ip, replaced, old);
 		return -EINVAL;
+	}
 
 	/* replace the text with the new text */
 	if (patch_instruction((unsigned int *)ip, new))
@@ -106,14 +109,15 @@ static int
 __ftrace_make_nop(struct module *mod,
 		  struct dyn_ftrace *rec, unsigned long addr)
 {
-	unsigned int op;
-	unsigned long entry, ptr;
+	unsigned long entry, ptr, tramp;
 	unsigned long ip = rec->ip;
-	void *tramp;
+	unsigned int op, pop;
 
 	/* read where this goes */
-	if (probe_kernel_read(&op, (void *)ip, sizeof(int)))
+	if (probe_kernel_read(&op, (void *)ip, sizeof(int))) {
+		pr_err("Fetching opcode failed.\n");
 		return -EFAULT;
+	}
 
 	/* Make sure that that this is still a 24bit jump */
 	if (!is_bl_op(op)) {
@@ -122,14 +126,9 @@ __ftrace_make_nop(struct module *mod,
 	}
 
 	/* lets find where the pointer goes */
-	tramp = (void *)find_bl_target(ip, op);
-
-	pr_devel("ip:%lx jumps to %p", ip, tramp);
+	tramp = find_bl_target(ip, op);
 
-	if (!is_module_trampoline(tramp)) {
-		pr_err("Not a trampoline\n");
-		return -EINVAL;
-	}
+	pr_devel("ip:%lx jumps to %lx", ip, tramp);
 
 	if (module_trampoline_target(mod, tramp, &ptr)) {
 		pr_err("Failed to get trampoline target\n");
@@ -158,10 +157,42 @@ __ftrace_make_nop(struct module *mod,
 	 *
 	 * Use a b +8 to jump over the load.
 	 */
-	op = 0x48000008;	/* b +8 */
 
-	if (patch_instruction((unsigned int *)ip, op))
+	pop = PPC_INST_BRANCH | 8;	/* b +8 */
+
+	/*
+	 * Check what is in the next instruction. We can see ld r2,40(r1), but
+	 * on first pass after boot we will see mflr r0.
+	 */
+	if (probe_kernel_read(&op, (void *)(ip+4), MCOUNT_INSN_SIZE)) {
+		pr_err("Fetching op failed.\n");
+		return -EFAULT;
+	}
+
+	if (op != PPC_INST_LD_TOC) {
+		unsigned int inst;
+
+		if (probe_kernel_read(&inst, (void *)(ip - 4), 4)) {
+			pr_err("Fetching instruction at %lx failed.\n", ip - 4);
+			return -EFAULT;
+		}
+
+		/* We expect either a mlfr r0, or a std r0, LRSAVE(r1) */
+		if (inst != PPC_INST_MFLR && inst != PPC_INST_STD_LR) {
+			pr_err("Unexpected instructions around bl _mcount\n"
+			       "when enabling dynamic ftrace!\t"
+			       "(%08x,bl,%08x)\n", inst, op);
+			return -EINVAL;
+		}
+
+		/* When using -mkernel_profile there is no load to jump over */
+		pop = PPC_INST_NOP;
+	}
+
+	if (patch_instruction((unsigned int *)ip, pop)) {
+		pr_err("Patching NOP failed.\n");
 		return -EPERM;
+	}
 
 	return 0;
 }
@@ -287,16 +318,15 @@ int ftrace_make_nop(struct module *mod,
 
 #ifdef CONFIG_MODULES
 #ifdef CONFIG_PPC64
+/*
+ * Examine the existing instructions for __ftrace_make_call.
+ * They should effectively be a NOP, and follow formal constraints,
+ * depending on the ABI. Return false if they don't.
+ */
+#ifndef CC_USING_MPROFILE_KERNEL
 static int
-__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1)
 {
-	unsigned int op[2];
-	void *ip = (void *)rec->ip;
-
-	/* read where this goes */
-	if (probe_kernel_read(op, ip, sizeof(op)))
-		return -EFAULT;
-
 	/*
 	 * We expect to see:
 	 *
@@ -306,8 +336,34 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	 * The load offset is different depending on the ABI. For simplicity
 	 * just mask it out when doing the compare.
 	 */
-	if ((op[0] != 0x48000008) || ((op[1] & 0xffff0000) != 0xe8410000)) {
-		pr_err("Unexpected call sequence: %x %x\n", op[0], op[1]);
+	if ((op0 != 0x48000008) || ((op1 & 0xffff0000) != 0xe8410000))
+		return 0;
+	return 1;
+}
+#else
+static int
+expected_nop_sequence(void *ip, unsigned int op0, unsigned int op1)
+{
+	/* look for patched "NOP" on ppc64 with -mprofile-kernel */
+	if (op0 != PPC_INST_NOP)
+		return 0;
+	return 1;
+}
+#endif
+
+static int
+__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned int op[2];
+	void *ip = (void *)rec->ip;
+
+	/* read where this goes */
+	if (probe_kernel_read(op, ip, sizeof(op)))
+		return -EFAULT;
+
+	if (!expected_nop_sequence(ip, op[0], op[1])) {
+		pr_err("Unexpected call sequence at %p: %x %x\n",
+		ip, op[0], op[1]);
 		return -EINVAL;
 	}
 
@@ -330,7 +386,16 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 
 	return 0;
 }
-#else
+
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
+			unsigned long addr)
+{
+	return ftrace_make_call(rec, addr);
+}
+#endif
+
+#else  /* !CONFIG_PPC64: */
 static int
 __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
@@ -455,20 +520,13 @@ void ftrace_replace_code(int enable)
 	}
 }
 
+/*
+ * Use the default ftrace_modify_all_code, but without
+ * stop_machine().
+ */
 void arch_ftrace_update_code(int command)
 {
-	if (command & FTRACE_UPDATE_CALLS)
-		ftrace_replace_code(1);
-	else if (command & FTRACE_DISABLE_CALLS)
-		ftrace_replace_code(0);
-
-	if (command & FTRACE_UPDATE_TRACE_FUNC)
-		ftrace_update_ftrace_func(ftrace_trace_function);
-
-	if (command & FTRACE_START_FUNC_RET)
-		ftrace_enable_ftrace_graph_caller();
-	else if (command & FTRACE_STOP_FUNC_RET)
-		ftrace_disable_ftrace_graph_caller();
+	ftrace_modify_all_code(command);
 }
 
 int __init ftrace_dyn_arch_init(void)
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b5061abbd2e0..9cdf5c71e426 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -806,7 +806,7 @@ _GLOBAL(set_context)
 _GLOBAL(init_cpu_state)
 	mflr	r22
 #ifdef CONFIG_PPC_47x
-	/* We use the PVR to differenciate 44x cores from 476 */
+	/* We use the PVR to differentiate 44x cores from 476 */
 	mfspr	r3,SPRN_PVR
 	srwi	r3,r3,16
 	cmplwi	cr0,r3,PVR_476FPE@h
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 1b779560728f..4286775cbde9 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -40,6 +40,8 @@
 #include <asm/kvm_book3s_asm.h>
 #include <asm/ptrace.h>
 #include <asm/hw_irq.h>
+#include <asm/cputhreads.h>
+#include <asm/ppc-opcode.h>
 
 /* The physical memory is laid out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -181,6 +183,64 @@ exception_marker:
 #endif
 
 #ifdef CONFIG_PPC_BOOK3E
+/*
+ * The booting_thread_hwid holds the thread id we want to boot in cpu
+ * hotplug case. It is set by cpu hotplug code, and is invalid by default.
+ * The thread id is the same as the initial value of SPRN_PIR[THREAD_ID]
+ * bit field.
+ */
+	.globl	booting_thread_hwid
+booting_thread_hwid:
+	.long  INVALID_THREAD_HWID
+	.align 3
+/*
+ * start a thread in the same core
+ * input parameters:
+ * r3 = the thread physical id
+ * r4 = the entry point where thread starts
+ */
+_GLOBAL(book3e_start_thread)
+	LOAD_REG_IMMEDIATE(r5, MSR_KERNEL)
+	cmpi	0, r3, 0
+	beq	10f
+	cmpi	0, r3, 1
+	beq	11f
+	/* If the thread id is invalid, just exit. */
+	b	13f
+10:
+	MTTMR(TMRN_IMSR0, 5)
+	MTTMR(TMRN_INIA0, 4)
+	b	12f
+11:
+	MTTMR(TMRN_IMSR1, 5)
+	MTTMR(TMRN_INIA1, 4)
+12:
+	isync
+	li	r6, 1
+	sld	r6, r6, r3
+	mtspr	SPRN_TENS, r6
+13:
+	blr
+
+/*
+ * stop a thread in the same core
+ * input parameter:
+ * r3 = the thread physical id
+ */
+_GLOBAL(book3e_stop_thread)
+	cmpi	0, r3, 0
+	beq	10f
+	cmpi	0, r3, 1
+	beq	10f
+	/* If the thread id is invalid, just exit. */
+	b	13f
+10:
+	li	r4, 1
+	sld	r4, r4, r3
+	mtspr	SPRN_TENC, r4
+13:
+	blr
+
 _GLOBAL(fsl_secondary_thread_init)
 	mfspr	r4,SPRN_BUCSR
 
@@ -261,6 +321,44 @@ _GLOBAL(generic_secondary_smp_init)
 	mr	r3,r24
 	mr	r4,r25
 	bl	book3e_secondary_core_init
+
+/*
+ * After common core init has finished, check if the current thread is the
+ * one we wanted to boot. If not, start the specified thread and stop the
+ * current thread.
+ */
+	LOAD_REG_ADDR(r4, booting_thread_hwid)
+	lwz     r3, 0(r4)
+	li	r5, INVALID_THREAD_HWID
+	cmpw	r3, r5
+	beq	20f
+
+	/*
+	 * The value of booting_thread_hwid has been stored in r3,
+	 * so make it invalid.
+	 */
+	stw	r5, 0(r4)
+
+	/*
+	 * Get the current thread id and check if it is the one we wanted.
+	 * If not, start the one specified in booting_thread_hwid and stop
+	 * the current thread.
+	 */
+	mfspr	r8, SPRN_TIR
+	cmpw	r3, r8
+	beq	20f
+
+	/* start the specified thread */
+	LOAD_REG_ADDR(r5, fsl_secondary_thread_init)
+	ld	r4, 0(r5)
+	bl	book3e_start_thread
+
+	/* stop the current thread */
+	mr	r3, r8
+	bl	book3e_stop_thread
+10:
+	b	10b
+20:
 #endif
 
 generic_secondary_common_init:
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 78c1eba4c04a..80c69472314e 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -329,7 +329,7 @@ InstructionTLBMiss:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) || defined (CONFIG_DEBUG_PAGEALLOC)
 	/* Only modules will cause ITLB Misses as we always
 	 * pin the first 8MB of kernel memory */
 	mfspr	r11, SPRN_SRR0	/* Get effective address of fault */
@@ -385,27 +385,26 @@ InstructionTLBMiss:
 
 	. = 0x1200
 DataStoreTLBMiss:
-#ifdef CONFIG_8xx_CPU6
 	mtspr	SPRN_SPRG_SCRATCH2, r3
-#endif
 	EXCEPTION_PROLOG_0
-	mfcr	r10
+	mfcr	r3
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	mfspr	r11, SPRN_MD_EPN
-	IS_KERNEL(r11, r11)
+	mfspr	r10, SPRN_MD_EPN
+	IS_KERNEL(r11, r10)
 	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
 	BRANCH_UNLESS_KERNEL(3f)
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
-	mtcr	r10
-	mfspr	r10, SPRN_MD_EPN
 
 	/* Insert level 1 index */
 	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	mtcr	r11
+	bt-	28,DTLBMiss8M		/* bit 28 = Large page (8M) */
+	mtcr	r3
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
@@ -453,13 +452,34 @@ DataStoreTLBMiss:
 	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
 
 	/* Restore registers */
-#ifdef CONFIG_8xx_CPU6
 	mfspr	r3, SPRN_SPRG_SCRATCH2
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	EXCEPTION_EPILOG_0
+	rfi
+
+DTLBMiss8M:
+	mtcr	r3
+	ori	r11, r11, MD_SVALID
+	MTSPR_CPU6(SPRN_MD_TWC, r11, r3)
+#ifdef CONFIG_PPC_16K_PAGES
+	/*
+	 * In 16k pages mode, each PGD entry defines a 64M block.
+	 * Here we select the 8M page within the block.
+	 */
+	rlwimi	r11, r10, 0, 0x03800000
 #endif
+	rlwinm	r10, r11, 0, 0xff800000
+	ori	r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY	| \
+			  _PAGE_PRESENT
+	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
+
+	li	r11, RPN_PATTERN
+	mfspr	r3, SPRN_SPRG_SCRATCH2
 	mtspr	SPRN_DAR, r11	/* Tag DAR */
 	EXCEPTION_EPILOG_0
 	rfi
 
+
 /* This is an instruction TLB error on the MPC8xx.  This could be due
  * to many reasons, such as executing guarded memory or illegal instruction
  * addresses.  There is nothing to do but handle a big time error fault.
@@ -537,13 +557,15 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	/* Insert level 1 index */
 3:	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	mtcr	r11
+	bt	28,200f		/* bit 28 = Large page (8M) */
 	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
 	/* Insert level 2 index */
 	rlwimi	r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
 	lwz	r11, 0(r11)	/* Get the pte */
 	/* concat physical page address(r11) and page offset(r10) */
 	rlwimi	r11, r10, 0, 32 - PAGE_SHIFT, 31
-	lwz	r11,0(r11)
+201:	lwz	r11,0(r11)
 /* Check if it really is a dcbx instruction. */
 /* dcbt and dcbtst does not generate DTLB Misses/Errors,
  * no need to include them here */
@@ -562,6 +584,10 @@ FixupDAR:/* Entry point for dcbx workaround. */
 141:	mfspr	r10,SPRN_SPRG_SCRATCH2
 	b	DARFixed	/* Nope, go back to normal TLB processing */
 
+	/* concat physical page address(r11) and page offset(r10) */
+200:	rlwimi	r11, r10, 0, 32 - (PAGE_SHIFT << 1), 31
+	b	201b
+
 144:	mfspr	r10, SPRN_DSISR
 	rlwinm	r10, r10,0,7,5	/* Clear store bit for buggy dcbst insn */
 	mtspr	SPRN_DSISR, r10
@@ -857,68 +883,6 @@ initial_mmu:
 
 
 /*
- * Set up to use a given MMU context.
- * r3 is context number, r4 is PGD pointer.
- *
- * We place the physical address of the new task page directory loaded
- * into the MMU base register, and set the ASID compare register with
- * the new "context."
- */
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-
-	/* Register M_TW will contain base address of level 1 table minus the
-	 * lower part of the kernel PGDIR base address, so that all accesses to
-	 * level 1 table are done relative to lower part of kernel PGDIR base
-	 * address.
-	 */
-	li	r5, (swapper_pg_dir-PAGE_OFFSET)@l
-	sub	r4, r4, r5
-	tophys	(r4, r4)
-#ifdef CONFIG_8xx_CPU6
-	lis	r6, cpu6_errata_word@h
-	ori	r6, r6, cpu6_errata_word@l
-	li	r7, 0x3f80
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-#endif
-	mtspr	SPRN_M_TW, r4		/* Update pointeur to level 1 table */
-#ifdef CONFIG_8xx_CPU6
-	li	r7, 0x3380
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-#endif
-	mtspr	SPRN_M_CASID, r3	/* Update context */
-	SYNC
-	blr
-
-#ifdef CONFIG_8xx_CPU6
-/* It's here because it is unique to the 8xx.
- * It is important we get called with interrupts disabled.  I used to
- * do that, but it appears that all code that calls this already had
- * interrupt disabled.
- */
-	.globl	set_dec_cpu6
-set_dec_cpu6:
-	lis	r7, cpu6_errata_word@h
-	ori	r7, r7, cpu6_errata_word@l
-	li	r4, 0x2c00
-	stw	r4, 8(r7)
-	lwz	r4, 8(r7)
-        mtspr   22, r3		/* Update Decrementer */
-	SYNC
-	blr
-#endif
-
-/*
  * We put a few things here that have to be page-aligned.
  * This stuff goes at the beginning of the data segment,
  * which is page-aligned.
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index fffd1f96bb1d..3bfa3150911f 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -857,29 +857,6 @@ _GLOBAL(load_up_spe)
 	oris	r5,r5,MSR_SPE@h
 	mtmsr	r5			/* enable use of SPE now */
 	isync
-/*
- * For SMP, we don't do lazy SPE switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_spe in switch_to.
- */
-#ifndef CONFIG_SMP
-	lis	r3,last_task_used_spe@ha
-	lwz	r4,last_task_used_spe@l(r3)
-	cmpi	0,r4,0
-	beq	1f
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_spe */
-	SAVE_32EVRS(0,r10,r4,THREAD_EVR0)
-	evxor	evr10, evr10, evr10	/* clear out evr10 */
-	evmwumiaa evr10, evr10, evr10	/* evr10 <- ACC = 0 * 0 + ACC */
-	li	r5,THREAD_ACC
-	evstddx	evr10, r4, r5		/* save off accumulator */
-	lwz	r5,PT_REGS(r4)
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_SPE@h
-	andc	r4,r4,r10	/* disable SPE for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* !CONFIG_SMP */
 	/* enable use of SPE after return */
 	oris	r9,r9,MSR_SPE@h
 	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
@@ -889,10 +866,6 @@ _GLOBAL(load_up_spe)
 	evlddx	evr4,r10,r5
 	evmra	evr4,evr4
 	REST_32EVRS(0,r10,r5,THREAD_EVR0)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	stw	r4,last_task_used_spe@l(r3)
-#endif /* !CONFIG_SMP */
 	blr
 
 /*
@@ -1011,16 +984,10 @@ _GLOBAL(__setup_ehv_ivors)
 
 #ifdef CONFIG_SPE
 /*
- * extern void giveup_spe(struct task_struct *prev)
+ * extern void __giveup_spe(struct task_struct *prev)
  *
  */
-_GLOBAL(giveup_spe)
-	mfmsr	r5
-	oris	r5,r5,MSR_SPE@h
-	mtmsr	r5			/* enable use of SPE now */
-	isync
-	cmpi	0,r3,0
-	beqlr-				/* if no previous owner, done */
+_GLOBAL(__giveup_spe)
 	addi	r3,r3,THREAD		/* want THREAD of task */
 	lwz	r5,PT_REGS(r3)
 	cmpi	0,r5,0
@@ -1035,11 +1002,6 @@ _GLOBAL(giveup_spe)
 	andc	r4,r4,r3		/* disable SPE for previous task */
 	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_spe@ha
-	stw	r5,last_task_used_spe@l(r4)
-#endif /* !CONFIG_SMP */
 	blr
 #endif /* CONFIG_SPE */
 
@@ -1075,80 +1037,6 @@ _GLOBAL(set_context)
 	isync			/* Force context change */
 	blr
 
-_GLOBAL(flush_dcache_L1)
-	mfspr	r3,SPRN_L1CFG0
-
-	rlwinm	r5,r3,9,3	/* Extract cache block size */
-	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
-				 * are currently defined.
-				 */
-	li	r4,32
-	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
-				 *      log2(number of ways)
-				 */
-	slw	r5,r4,r5	/* r5 = cache block size */
-
-	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
-	mulli	r7,r7,13	/* An 8-way cache will require 13
-				 * loads per set.
-				 */
-	slw	r7,r7,r6
-
-	/* save off HID0 and set DCFA */
-	mfspr	r8,SPRN_HID0
-	ori	r9,r8,HID0_DCFA@l
-	mtspr	SPRN_HID0,r9
-	isync
-
-	lis	r4,KERNELBASE@h
-	mtctr	r7
-
-1:	lwz	r3,0(r4)	/* Load... */
-	add	r4,r4,r5
-	bdnz	1b
-
-	msync
-	lis	r4,KERNELBASE@h
-	mtctr	r7
-
-1:	dcbf	0,r4		/* ...and flush. */
-	add	r4,r4,r5
-	bdnz	1b
-	
-	/* restore HID0 */
-	mtspr	SPRN_HID0,r8
-	isync
-
-	blr
-
-/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
-_GLOBAL(__flush_disable_L1)
-	mflr	r10
-	bl	flush_dcache_L1	/* Flush L1 d-cache */
-	mtlr	r10
-
-	mfspr	r4, SPRN_L1CSR0	/* Invalidate and disable d-cache */
-	li	r5, 2
-	rlwimi	r4, r5, 0, 3
-
-	msync
-	isync
-	mtspr	SPRN_L1CSR0, r4
-	isync
-
-1:	mfspr	r4, SPRN_L1CSR0	/* Wait for the invalidate to finish */
-	andi.	r4, r4, 2
-	bne	1b
-
-	mfspr	r4, SPRN_L1CSR1	/* Invalidate and disable i-cache */
-	li	r5, 2
-	rlwimi	r4, r5, 0, 3
-
-	mtspr	SPRN_L1CSR1, r4
-	isync
-
-	blr
-
 #ifdef CONFIG_SMP
 /* When we get here, r24 needs to hold the CPU # */
 	.globl __secondary_start
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 05e804cdecaa..aec9a1b1d25b 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -109,8 +109,9 @@ void arch_unregister_hw_breakpoint(struct perf_event *bp)
 	 * If the breakpoint is unregistered between a hw_breakpoint_handler()
 	 * and the single_step_dabr_instruction(), then cleanup the breakpoint
 	 * restoration variables to prevent dangling pointers.
+	 * FIXME, this should not be using bp->ctx at all! Sayeth peterz.
 	 */
-	if (bp->ctx && bp->ctx->task)
+	if (bp->ctx && bp->ctx->task && bp->ctx->task != ((void *)-1L))
 		bp->ctx->task->thread.last_hit_ubp = NULL;
 }
 
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 112ccf497562..470ceebd2d23 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -19,7 +19,7 @@
 #include <asm/kvm_book3s_asm.h>
 #include <asm/opal.h>
 #include <asm/cpuidle.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 
 #undef DEBUG
 
@@ -89,13 +89,6 @@ _GLOBAL(power7_powersave_common)
 	std	r0,_LINK(r1)
 	std	r0,_NIP(r1)
 
-#ifndef CONFIG_SMP
-	/* Make sure FPU, VSX etc... are flushed as we may lose
-	 * state when going to nap mode
-	 */
-	bl	discard_lazy_cpu_state
-#endif /* CONFIG_SMP */
-
 	/* Hard disable interrupts */
 	mfmsr	r9
 	rldicl	r9,r9,48,1
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index e77c3ccf8dcf..dbf098121ce6 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -445,7 +445,11 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
  * Global data
  */
 struct kgdb_arch arch_kgdb_ops = {
+#ifdef __LITTLE_ENDIAN__
+	.gdb_bpt_instr = {0x08, 0x10, 0x82, 0x7d},
+#else
 	.gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
+#endif
 };
 
 static int kgdb_not_implemented(struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index 2c647b1e62e4..ee62b197502d 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -54,8 +54,8 @@ static void flush_tlb_206(unsigned int num_sets, unsigned int action)
 }
 
 /*
- * Generic routine to flush TLB on power7. This routine is used as
- * flush_tlb hook in cpu_spec for Power7 processor.
+ * Generic routines to flush TLB on POWER processors. These routines
+ * are used as flush_tlb hook in the cpu_spec.
  *
  * action => TLB_INVAL_SCOPE_GLOBAL:  Invalidate all TLBs.
  *	     TLB_INVAL_SCOPE_LPID: Invalidate TLB for current LPID.
@@ -65,18 +65,17 @@ void __flush_tlb_power7(unsigned int action)
 	flush_tlb_206(POWER7_TLB_SETS, action);
 }
 
-/*
- * Generic routine to flush TLB on power8. This routine is used as
- * flush_tlb hook in cpu_spec for power8 processor.
- *
- * action => TLB_INVAL_SCOPE_GLOBAL:  Invalidate all TLBs.
- *	     TLB_INVAL_SCOPE_LPID: Invalidate TLB for current LPID.
- */
 void __flush_tlb_power8(unsigned int action)
 {
 	flush_tlb_206(POWER8_TLB_SETS, action);
 }
 
+void __flush_tlb_power9(unsigned int action)
+{
+	flush_tlb_206(POWER9_TLB_SETS_HASH, action);
+}
+
+
 /* flush SLBs and reload */
 static void flush_and_reload_slb(void)
 {
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index ed3ab509faca..bf5160fbf9d8 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -91,17 +91,16 @@ _GLOBAL(mulhdu)
 	addc	r7,r0,r7
 	addze	r4,r4
 1:	beqlr	cr1		/* all done if high part of A is 0 */
-	mr	r10,r3
 	mullw	r9,r3,r5
-	mulhwu	r3,r3,r5
+	mulhwu	r10,r3,r5
 	beq	2f
-	mullw	r0,r10,r6
-	mulhwu	r8,r10,r6
+	mullw	r0,r3,r6
+	mulhwu	r8,r3,r6
 	addc	r7,r0,r7
 	adde	r4,r4,r8
-	addze	r3,r3
+	addze	r10,r10
 2:	addc	r4,r4,r9
-	addze	r3,r3
+	addze	r3,r10
 	blr
 
 /*
@@ -296,12 +295,9 @@ _GLOBAL(real_writeb)
  * Flush instruction cache.
  * This is a no-op on the 601.
  */
+#ifndef CONFIG_PPC_8xx
 _GLOBAL(flush_instruction_cache)
-#if defined(CONFIG_8xx)
-	isync
-	lis	r5, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r5
-#elif defined(CONFIG_4xx)
+#if defined(CONFIG_4xx)
 #ifdef CONFIG_403GCX
 	li      r3, 512
 	mtctr   r3
@@ -334,9 +330,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
 	mfspr	r3,SPRN_HID0
 	ori	r3,r3,HID0_ICFI
 	mtspr	SPRN_HID0,r3
-#endif /* CONFIG_8xx/4xx */
+#endif /* CONFIG_4xx */
 	isync
 	blr
+#endif /* CONFIG_PPC_8xx */
 
 /*
  * Write any modified data cache blocks out to memory
@@ -350,10 +347,9 @@ BEGIN_FTR_SECTION
 	PURGE_PREFETCHED_INS
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
+	rlwinm	r3,r3,0,0,31 - L1_CACHE_SHIFT
 	subf	r4,r3,r4
-	add	r4,r4,r5
+	addi	r4,r4,L1_CACHE_BYTES - 1
 	srwi.	r4,r4,L1_CACHE_SHIFT
 	beqlr
 	mtctr	r4
@@ -377,71 +373,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	isync
 	blr
 /*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbf	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Like above, but invalidate the D-cache.  This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbi	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbi's to get to ram */
-	blr
-
-/*
  * Flush a particular page from the data cache to RAM.
  * Note: this is necessary because the instruction cache does *not*
  * snoop from the data cache.
@@ -519,22 +450,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 #endif /* CONFIG_BOOKE */
 
 /*
- * Clear pages using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced).  This only works on cacheable memory.
- *
- * void clear_pages(void *page, int order) ;
- */
-_GLOBAL(clear_pages)
-	li	r0,PAGE_SIZE/L1_CACHE_BYTES
-	slw	r0,r0,r4
-	mtctr	r0
-1:	dcbz	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	blr
-
-/*
  * Copy a whole page.  We use the dcbz instruction on the destination
  * to reduce memory traffic (it eliminates the unnecessary reads of
  * the destination into cache).  This requires that the destination
@@ -743,6 +658,8 @@ relocate_new_kernel:
 	/* Check for 47x cores */
 	mfspr	r3,SPRN_PVR
 	srwi	r3,r3,16
+	cmplwi	cr0,r3,PVR_476FPE@h
+	beq	setup_map_47x
 	cmplwi	cr0,r3,PVR_476@h
 	beq	setup_map_47x
 	cmplwi	cr0,r3,PVR_476_ISS@h
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index db475d41b57a..f28754c497e5 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -701,31 +701,3 @@ _GLOBAL(kexec_sequence)
 	li	r5,0
 	blr	/* image->start(physid, image->start, 0); */
 #endif /* CONFIG_KEXEC */
-
-#ifdef CONFIG_MODULES
-#if defined(_CALL_ELF) && _CALL_ELF == 2
-
-#ifdef CONFIG_MODVERSIONS
-.weak __crc_TOC.
-.section "___kcrctab+TOC.","a"
-.globl __kcrctab_TOC.
-__kcrctab_TOC.:
-	.llong	__crc_TOC.
-#endif
-
-/*
- * Export a fake .TOC. since both modpost and depmod will complain otherwise.
- * Both modpost and depmod strip the leading . so we do the same here.
- */
-.section "__ksymtab_strings","a"
-__kstrtab_TOC.:
-	.asciz "TOC."
-
-.section "___ksymtab+TOC.","a"
-/* This symbol name is important: it's used by modpost to find exported syms */
-.globl __ksymtab_TOC.
-__ksymtab_TOC.:
-	.llong 0 /* .value */
-	.llong __kstrtab_TOC.
-#endif /* ELFv2 */
-#endif /* MODULES */
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 9547381b631a..d1f1b35bf0c7 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -47,6 +47,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 		const Elf_Shdr *sechdrs, struct module *me)
 {
 	const Elf_Shdr *sect;
+	int rc;
+
+	rc = module_finalize_ftrace(me, sechdrs);
+	if (rc)
+		return rc;
 
 	/* Apply feature fixups */
 	sect = find_section(hdr, sechdrs, "__ftr_fixup");
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index c94d2e018d84..5a7a78f12562 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -181,15 +181,15 @@ static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
 /* Set up a trampoline in the PLT to bounce us to the distant function */
 static uint32_t do_plt_call(void *location,
 			    Elf32_Addr val,
-			    Elf32_Shdr *sechdrs,
+			    const Elf32_Shdr *sechdrs,
 			    struct module *mod)
 {
 	struct ppc_plt_entry *entry;
 
 	pr_debug("Doing plt for call to 0x%x at 0x%x\n", val, (unsigned int)location);
 	/* Init, or core PLT? */
-	if (location >= mod->module_core
-	    && location < mod->module_core + mod->core_size)
+	if (location >= mod->core_layout.base
+	    && location < mod->core_layout.base + mod->core_layout.size)
 		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
 	else
 		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
@@ -294,11 +294,19 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 			return -ENOEXEC;
 		}
 	}
+
+	return 0;
+}
+
 #ifdef CONFIG_DYNAMIC_FTRACE
-	module->arch.tramp =
-		do_plt_call(module->module_core,
-			    (unsigned long)ftrace_caller,
-			    sechdrs, module);
-#endif
+int module_finalize_ftrace(struct module *module, const Elf_Shdr *sechdrs)
+{
+	module->arch.tramp = do_plt_call(module->core_layout.base,
+					 (unsigned long)ftrace_caller,
+					 sechdrs, module);
+	if (!module->arch.tramp)
+		return -ENOENT;
+
 	return 0;
 }
+#endif
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 68384514506b..9ce9a25f58b5 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -31,6 +31,7 @@
 #include <asm/code-patching.h>
 #include <linux/sort.h>
 #include <asm/setup.h>
+#include <asm/sections.h>
 
 /* FIXME: We don't do .init separately.  To do this, we'd need to have
    a separate r2 value in the init and core section, and stub between
@@ -41,7 +42,6 @@
    --RR.  */
 
 #if defined(_CALL_ELF) && _CALL_ELF == 2
-#define R2_STACK_OFFSET 24
 
 /* An address is simply the address of the function. */
 typedef unsigned long func_desc_t;
@@ -73,7 +73,6 @@ static unsigned int local_entry_offset(const Elf64_Sym *sym)
 	return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other);
 }
 #else
-#define R2_STACK_OFFSET 40
 
 /* An address is address of the OPD entry, which contains address of fn. */
 typedef struct ppc64_opd_entry func_desc_t;
@@ -96,6 +95,8 @@ static unsigned int local_entry_offset(const Elf64_Sym *sym)
 }
 #endif
 
+#define STUB_MAGIC 0x73747562 /* stub */
+
 /* Like PPC32, we need little trampolines to do > 24-bit jumps (into
    the kernel itself).  But on PPC64, these need to be used for every
    jump, actually, to reset r2 (TOC+0x8000). */
@@ -105,7 +106,8 @@ struct ppc64_stub_entry
 	 * need 6 instructions on ABIv2 but we always allocate 7 so
 	 * so we don't have to modify the trampoline load instruction. */
 	u32 jump[7];
-	u32 unused;
+	/* Used by ftrace to identify stubs */
+	u32 magic;
 	/* Data for the above code */
 	func_desc_t funcdata;
 };
@@ -139,70 +141,39 @@ static u32 ppc64_stub_insns[] = {
 };
 
 #ifdef CONFIG_DYNAMIC_FTRACE
-
-static u32 ppc64_stub_mask[] = {
-	0xffff0000,
-	0xffff0000,
-	0xffffffff,
-	0xffffffff,
-#if !defined(_CALL_ELF) || _CALL_ELF != 2
-	0xffffffff,
-#endif
-	0xffffffff,
-	0xffffffff
-};
-
-bool is_module_trampoline(u32 *p)
+int module_trampoline_target(struct module *mod, unsigned long addr,
+			     unsigned long *target)
 {
-	unsigned int i;
-	u32 insns[ARRAY_SIZE(ppc64_stub_insns)];
-
-	BUILD_BUG_ON(sizeof(ppc64_stub_insns) != sizeof(ppc64_stub_mask));
+	struct ppc64_stub_entry *stub;
+	func_desc_t funcdata;
+	u32 magic;
 
-	if (probe_kernel_read(insns, p, sizeof(insns)))
+	if (!within_module_core(addr, mod)) {
+		pr_err("%s: stub %lx not in module %s\n", __func__, addr, mod->name);
 		return -EFAULT;
-
-	for (i = 0; i < ARRAY_SIZE(ppc64_stub_insns); i++) {
-		u32 insna = insns[i];
-		u32 insnb = ppc64_stub_insns[i];
-		u32 mask = ppc64_stub_mask[i];
-
-		if ((insna & mask) != (insnb & mask))
-			return false;
 	}
 
-	return true;
-}
-
-int module_trampoline_target(struct module *mod, u32 *trampoline,
-			     unsigned long *target)
-{
-	u32 buf[2];
-	u16 upper, lower;
-	long offset;
-	void *toc_entry;
+	stub = (struct ppc64_stub_entry *)addr;
 
-	if (probe_kernel_read(buf, trampoline, sizeof(buf)))
+	if (probe_kernel_read(&magic, &stub->magic, sizeof(magic))) {
+		pr_err("%s: fault reading magic for stub %lx for %s\n", __func__, addr, mod->name);
 		return -EFAULT;
+	}
 
-	upper = buf[0] & 0xffff;
-	lower = buf[1] & 0xffff;
-
-	/* perform the addis/addi, both signed */
-	offset = ((short)upper << 16) + (short)lower;
+	if (magic != STUB_MAGIC) {
+		pr_err("%s: bad magic for stub %lx for %s\n", __func__, addr, mod->name);
+		return -EFAULT;
+	}
 
-	/*
-	 * Now get the address this trampoline jumps to. This
-	 * is always 32 bytes into our trampoline stub.
-	 */
-	toc_entry = (void *)mod->arch.toc + offset + 32;
+	if (probe_kernel_read(&funcdata, &stub->funcdata, sizeof(funcdata))) {
+		pr_err("%s: fault reading funcdata for stub %lx for %s\n", __func__, addr, mod->name);
+                return -EFAULT;
+	}
 
-	if (probe_kernel_read(target, toc_entry, sizeof(*target)))
-		return -EFAULT;
+	*target = stub_func_addr(funcdata);
 
 	return 0;
 }
-
 #endif
 
 /* Count how many different 24-bit relocations (different symbol,
@@ -326,7 +297,10 @@ static void dedotify_versions(struct modversion_info *vers,
 		}
 }
 
-/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */
+/*
+ * Undefined symbols which refer to .funcname, hack to funcname. Make .TOC.
+ * seem to be defined (value set later).
+ */
 static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 {
 	unsigned int i;
@@ -334,8 +308,11 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 	for (i = 1; i < numsyms; i++) {
 		if (syms[i].st_shndx == SHN_UNDEF) {
 			char *name = strtab + syms[i].st_name;
-			if (name[0] == '.')
-				memmove(name, name+1, strlen(name));
+			if (name[0] == '.') {
+				if (strcmp(name+1, "TOC.") == 0)
+					syms[i].st_shndx = SHN_ABS;
+				syms[i].st_name++;
+			}
 		}
 	}
 }
@@ -351,7 +328,7 @@ static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs,
 	numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
 
 	for (i = 1; i < numsyms; i++) {
-		if (syms[i].st_shndx == SHN_UNDEF
+		if (syms[i].st_shndx == SHN_ABS
 		    && strcmp(strtab + syms[i].st_name, "TOC.") == 0)
 			return &syms[i];
 	}
@@ -407,7 +384,7 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
 /* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this
    gives the value maximum span in an instruction which uses a signed
    offset) */
-static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me)
+static inline unsigned long my_r2(const Elf64_Shdr *sechdrs, struct module *me)
 {
 	return sechdrs[me->arch.toc_section].sh_addr + 0x8000;
 }
@@ -420,7 +397,7 @@ static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me)
 #define PPC_HA(v) PPC_HI ((v) + 0x8000)
 
 /* Patch stub to reference function and correct r2 value. */
-static inline int create_stub(Elf64_Shdr *sechdrs,
+static inline int create_stub(const Elf64_Shdr *sechdrs,
 			      struct ppc64_stub_entry *entry,
 			      unsigned long addr,
 			      struct module *me)
@@ -441,12 +418,14 @@ static inline int create_stub(Elf64_Shdr *sechdrs,
 	entry->jump[0] |= PPC_HA(reladdr);
 	entry->jump[1] |= PPC_LO(reladdr);
 	entry->funcdata = func_desc(addr);
+	entry->magic = STUB_MAGIC;
+
 	return 1;
 }
 
 /* Create stub to jump to function described in this OPD/ptr: we need the
    stub to set up the TOC ptr (r2) for the function. */
-static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
+static unsigned long stub_for_addr(const Elf64_Shdr *sechdrs,
 				   unsigned long addr,
 				   struct module *me)
 {
@@ -470,17 +449,60 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
 	return (unsigned long)&stubs[i];
 }
 
+#ifdef CC_USING_MPROFILE_KERNEL
+static bool is_early_mcount_callsite(u32 *instruction)
+{
+	/*
+	 * Check if this is one of the -mprofile-kernel sequences.
+	 */
+	if (instruction[-1] == PPC_INST_STD_LR &&
+	    instruction[-2] == PPC_INST_MFLR)
+		return true;
+
+	if (instruction[-1] == PPC_INST_MFLR)
+		return true;
+
+	return false;
+}
+
+/*
+ * In case of _mcount calls, do not save the current callee's TOC (in r2) into
+ * the original caller's stack frame. If we did we would clobber the saved TOC
+ * value of the original caller.
+ */
+static void squash_toc_save_inst(const char *name, unsigned long addr)
+{
+	struct ppc64_stub_entry *stub = (struct ppc64_stub_entry *)addr;
+
+	/* Only for calls to _mcount */
+	if (strcmp("_mcount", name) != 0)
+		return;
+
+	stub->jump[2] = PPC_INST_NOP;
+}
+#else
+static void squash_toc_save_inst(const char *name, unsigned long addr) { }
+
+/* without -mprofile-kernel, mcount calls are never early */
+static bool is_early_mcount_callsite(u32 *instruction)
+{
+	return false;
+}
+#endif
+
 /* We expect a noop next: if it is, replace it with instruction to
    restore r2. */
 static int restore_r2(u32 *instruction, struct module *me)
 {
 	if (*instruction != PPC_INST_NOP) {
+		if (is_early_mcount_callsite(instruction - 1))
+			return 1;
 		pr_err("%s: Expect noop after relocate, got %08x\n",
 		       me->name, *instruction);
 		return 0;
 	}
 	/* ld r2,R2_STACK_OFFSET(r1) */
-	*instruction = 0xe8410000 | R2_STACK_OFFSET;
+	*instruction = PPC_INST_LD_TOC;
 	return 1;
 }
 
@@ -605,6 +627,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 					return -ENOENT;
 				if (!restore_r2((u32 *)location + 1, me))
 					return -ENOEXEC;
+
+				squash_toc_save_inst(strtab + sym->st_name, value);
 			} else
 				value += local_entry_offset(sym);
 
@@ -635,6 +659,33 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			 */
 			break;
 
+		case R_PPC64_ENTRY:
+			/*
+			 * Optimize ELFv2 large code model entry point if
+			 * the TOC is within 2GB range of current location.
+			 */
+			value = my_r2(sechdrs, me) - (unsigned long)location;
+			if (value + 0x80008000 > 0xffffffff)
+				break;
+			/*
+			 * Check for the large code model prolog sequence:
+		         *	ld r2, ...(r12)
+			 *	add r2, r2, r12
+			 */
+			if ((((uint32_t *)location)[0] & ~0xfffc)
+			    != 0xe84c0000)
+				break;
+			if (((uint32_t *)location)[1] != 0x7c426214)
+				break;
+			/*
+			 * If found, replace it with:
+			 *	addis r2, r12, (.TOC.-func)@ha
+			 *	addi r2, r12, (.TOC.-func)@l
+			 */
+			((uint32_t *)location)[0] = 0x3c4c0000 + PPC_HA(value);
+			((uint32_t *)location)[1] = 0x38420000 + PPC_LO(value);
+			break;
+
 		case R_PPC64_REL16_HA:
 			/* Subtract location pointer */
 			value -= (unsigned long)location;
@@ -660,12 +711,84 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 		}
 	}
 
+	return 0;
+}
+
 #ifdef CONFIG_DYNAMIC_FTRACE
-	me->arch.toc = my_r2(sechdrs, me);
-	me->arch.tramp = stub_for_addr(sechdrs,
-				       (unsigned long)ftrace_caller,
-				       me);
+
+#ifdef CC_USING_MPROFILE_KERNEL
+
+#define PACATOC offsetof(struct paca_struct, kernel_toc)
+
+/*
+ * For mprofile-kernel we use a special stub for ftrace_caller() because we
+ * can't rely on r2 containing this module's TOC when we enter the stub.
+ *
+ * That can happen if the function calling us didn't need to use the toc. In
+ * that case it won't have setup r2, and the r2 value will be either the
+ * kernel's toc, or possibly another modules toc.
+ *
+ * To deal with that this stub uses the kernel toc, which is always accessible
+ * via the paca (in r13). The target (ftrace_caller()) is responsible for
+ * saving and restoring the toc before returning.
+ */
+static unsigned long create_ftrace_stub(const Elf64_Shdr *sechdrs, struct module *me)
+{
+	struct ppc64_stub_entry *entry;
+	unsigned int i, num_stubs;
+	static u32 stub_insns[] = {
+		0xe98d0000 | PACATOC, 	/* ld      r12,PACATOC(r13)	*/
+		0x3d8c0000,		/* addis   r12,r12,<high>	*/
+		0x398c0000, 		/* addi    r12,r12,<low>	*/
+		0x7d8903a6, 		/* mtctr   r12			*/
+		0x4e800420, 		/* bctr				*/
+	};
+	long reladdr;
+
+	num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*entry);
+
+	/* Find the next available stub entry */
+	entry = (void *)sechdrs[me->arch.stubs_section].sh_addr;
+	for (i = 0; i < num_stubs && stub_func_addr(entry->funcdata); i++, entry++);
+
+	if (i >= num_stubs) {
+		pr_err("%s: Unable to find a free slot for ftrace stub.\n", me->name);
+		return 0;
+	}
+
+	memcpy(entry->jump, stub_insns, sizeof(stub_insns));
+
+	/* Stub uses address relative to kernel toc (from the paca) */
+	reladdr = (unsigned long)ftrace_caller - kernel_toc_addr();
+	if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) {
+		pr_err("%s: Address of ftrace_caller out of range of kernel_toc.\n", me->name);
+		return 0;
+	}
+
+	entry->jump[1] |= PPC_HA(reladdr);
+	entry->jump[2] |= PPC_LO(reladdr);
+
+	/* Eventhough we don't use funcdata in the stub, it's needed elsewhere. */
+	entry->funcdata = func_desc((unsigned long)ftrace_caller);
+	entry->magic = STUB_MAGIC;
+
+	return (unsigned long)entry;
+}
+#else
+static unsigned long create_ftrace_stub(const Elf64_Shdr *sechdrs, struct module *me)
+{
+	return stub_for_addr(sechdrs, (unsigned long)ftrace_caller, me);
+}
 #endif
 
+int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs)
+{
+	mod->arch.toc = my_r2(sechdrs, mod);
+	mod->arch.tramp = create_ftrace_stub(sechdrs, mod);
+
+	if (!mod->arch.tramp)
+		return -ENOENT;
+
 	return 0;
 }
+#endif
diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c
index 32e26526f7e4..0cab9e8c3794 100644
--- a/arch/powerpc/kernel/nvram_64.c
+++ b/arch/powerpc/kernel/nvram_64.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/kmsg_dump.h>
+#include <linux/pagemap.h>
 #include <linux/pstore.h>
 #include <linux/zlib.h>
 #include <asm/uaccess.h>
@@ -733,24 +734,10 @@ static void oops_to_nvram(struct kmsg_dumper *dumper,
 
 static loff_t dev_nvram_llseek(struct file *file, loff_t offset, int origin)
 {
-	int size;
-
 	if (ppc_md.nvram_size == NULL)
 		return -ENODEV;
-	size = ppc_md.nvram_size();
-
-	switch (origin) {
-	case 1:
-		offset += file->f_pos;
-		break;
-	case 2:
-		offset += size;
-		break;
-	}
-	if (offset < 0)
-		return -EINVAL;
-	file->f_pos = offset;
-	return file->f_pos;
+	return generic_file_llseek_size(file, offset, origin, MAX_LFS_FILESIZE,
+					ppc_md.nvram_size());
 }
 
 
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 01ea0edf0579..93dae296b6be 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -17,10 +17,6 @@
 #include <asm/pgtable.h>
 #include <asm/kexec.h>
 
-/* This symbol is provided by the linker - let it fill in the paca
- * field correctly */
-extern unsigned long __toc_start;
-
 #ifdef CONFIG_PPC_BOOK3S
 
 /*
@@ -149,11 +145,6 @@ EXPORT_SYMBOL(paca);
 
 void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 {
-       /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB
-	* of the TOC can be addressed using a single machine instruction.
-	*/
-	unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL;
-
 #ifdef CONFIG_PPC_BOOK3S
 	new_paca->lppaca_ptr = new_lppaca(cpu);
 #else
@@ -161,7 +152,7 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 #endif
 	new_paca->lock_token = 0x8000;
 	new_paca->paca_index = cpu;
-	new_paca->kernel_toc = kernel_toc;
+	new_paca->kernel_toc = kernel_toc_addr();
 	new_paca->kernelbase = (unsigned long) _stext;
 	/* Only set MSR:IR/DR when MMU is initialized */
 	new_paca->kernel_msr = MSR_KERNEL & ~(MSR_IR | MSR_DR);
diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c
index 7f9ed0c1f6b9..59c436189f46 100644
--- a/arch/powerpc/kernel/pci-hotplug.c
+++ b/arch/powerpc/kernel/pci-hotplug.c
@@ -55,7 +55,7 @@ void pcibios_remove_pci_devices(struct pci_bus *bus)
 
 	pr_debug("PCI: Removing devices on bus %04x:%02x\n",
 		 pci_domain_nr(bus),  bus->number);
-	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+	list_for_each_entry_safe_reverse(dev, tmp, &bus->devices, bus_list) {
 		pr_debug("   Removing %s...\n", pci_name(dev));
 		pci_stop_and_remove_bus_device(dev);
 	}
diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c
index b3b4df91b792..38102cb9baa9 100644
--- a/arch/powerpc/kernel/pci_dn.c
+++ b/arch/powerpc/kernel/pci_dn.c
@@ -139,6 +139,7 @@ struct pci_dn *pci_get_pdn(struct pci_dev *pdev)
 #ifdef CONFIG_PCI_IOV
 static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
 					   struct pci_dev *pdev,
+					   int vf_index,
 					   int busno, int devfn)
 {
 	struct pci_dn *pdn;
@@ -158,6 +159,7 @@ static struct pci_dn *add_one_dev_pci_data(struct pci_dn *parent,
 	pdn->busno = busno;
 	pdn->devfn = devfn;
 #ifdef CONFIG_PPC_POWERNV
+	pdn->vf_index = vf_index;
 	pdn->pe_number = IODA_INVALID_PE;
 #endif
 	INIT_LIST_HEAD(&pdn->child_list);
@@ -179,6 +181,7 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
 {
 #ifdef CONFIG_PCI_IOV
 	struct pci_dn *parent, *pdn;
+	struct eeh_dev *edev;
 	int i;
 
 	/* Only support IOV for now */
@@ -196,7 +199,7 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
 		return NULL;
 
 	for (i = 0; i < pci_sriov_get_totalvfs(pdev); i++) {
-		pdn = add_one_dev_pci_data(parent, NULL,
+		pdn = add_one_dev_pci_data(parent, NULL, i,
 					   pci_iov_virtfn_bus(pdev, i),
 					   pci_iov_virtfn_devfn(pdev, i));
 		if (!pdn) {
@@ -204,6 +207,12 @@ struct pci_dn *add_dev_pci_data(struct pci_dev *pdev)
 				 __func__, i);
 			return NULL;
 		}
+
+		/* Create the EEH device for the VF */
+		eeh_dev_init(pdn, pci_bus_to_host(pdev->bus));
+		edev = pdn_to_eeh_dev(pdn);
+		BUG_ON(!edev);
+		edev->physfn = pdev;
 	}
 #endif /* CONFIG_PCI_IOV */
 
@@ -215,6 +224,7 @@ void remove_dev_pci_data(struct pci_dev *pdev)
 #ifdef CONFIG_PCI_IOV
 	struct pci_dn *parent;
 	struct pci_dn *pdn, *tmp;
+	struct eeh_dev *edev;
 	int i;
 
 	/*
@@ -256,6 +266,13 @@ void remove_dev_pci_data(struct pci_dev *pdev)
 			    pdn->devfn != pci_iov_virtfn_devfn(pdev, i))
 				continue;
 
+			/* Release EEH device for the VF */
+			edev = pdn_to_eeh_dev(pdn);
+			if (edev) {
+				pdn->edev = NULL;
+				kfree(edev);
+			}
+
 			if (!list_empty(&pdn->list))
 				list_del(&pdn->list);
 
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
index 2e710c15893f..526ac6750e4d 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -187,9 +187,6 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 
 	pci_device_add(dev, bus);
 
-	/* Setup MSI caps & disable MSI/MSI-X interrupts */
-	pci_msi_setup_pci_dev(dev);
-
 	return dev;
 }
 EXPORT_SYMBOL(of_create_pci_dev);
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 202963ee013a..9f01e28ecef3 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -6,7 +6,9 @@
 #include <asm/cacheflush.h>
 #include <asm/epapr_hcalls.h>
 
+#ifdef CONFIG_PPC64
 EXPORT_SYMBOL(flush_dcache_range);
+#endif
 EXPORT_SYMBOL(flush_icache_range);
 
 EXPORT_SYMBOL(empty_zero_page);
@@ -19,25 +21,15 @@ EXPORT_SYMBOL(_mcount);
 #endif
 
 #ifdef CONFIG_PPC_FPU
-EXPORT_SYMBOL(giveup_fpu);
 EXPORT_SYMBOL(load_fp_state);
 EXPORT_SYMBOL(store_fp_state);
 #endif
 
 #ifdef CONFIG_ALTIVEC
-EXPORT_SYMBOL(giveup_altivec);
 EXPORT_SYMBOL(load_vr_state);
 EXPORT_SYMBOL(store_vr_state);
 #endif
 
-#ifdef CONFIG_VSX
-EXPORT_SYMBOL_GPL(__giveup_vsx);
-#endif
-
-#ifdef CONFIG_SPE
-EXPORT_SYMBOL(giveup_spe);
-#endif
-
 #ifdef CONFIG_EPAPR_PARAVIRT
 EXPORT_SYMBOL(epapr_hypercall_start);
 #endif
diff --git a/arch/powerpc/kernel/ppc_ksyms_32.c b/arch/powerpc/kernel/ppc_ksyms_32.c
index 30ddd8a24eee..2bfaafe5be99 100644
--- a/arch/powerpc/kernel/ppc_ksyms_32.c
+++ b/arch/powerpc/kernel/ppc_ksyms_32.c
@@ -10,7 +10,6 @@
 #include <asm/pgtable.h>
 #include <asm/dcr.h>
 
-EXPORT_SYMBOL(clear_pages);
 EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
 EXPORT_SYMBOL(DMA_MODE_READ);
 EXPORT_SYMBOL(DMA_MODE_WRITE);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 75b6676c1a0b..b8500b4ac7fe 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -67,15 +67,8 @@
 
 extern unsigned long _get_SP(void);
 
-#ifndef CONFIG_SMP
-struct task_struct *last_task_used_math = NULL;
-struct task_struct *last_task_used_altivec = NULL;
-struct task_struct *last_task_used_vsx = NULL;
-struct task_struct *last_task_used_spe = NULL;
-#endif
-
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-void giveup_fpu_maybe_transactional(struct task_struct *tsk)
+static void check_if_tm_restore_required(struct task_struct *tsk)
 {
 	/*
 	 * If we are saving the current thread's registers, and the
@@ -89,34 +82,77 @@ void giveup_fpu_maybe_transactional(struct task_struct *tsk)
 		tsk->thread.ckpt_regs.msr = tsk->thread.regs->msr;
 		set_thread_flag(TIF_RESTORE_TM);
 	}
+}
+#else
+static inline void check_if_tm_restore_required(struct task_struct *tsk) { }
+#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
-	giveup_fpu(tsk);
+bool strict_msr_control;
+EXPORT_SYMBOL(strict_msr_control);
+
+static int __init enable_strict_msr_control(char *str)
+{
+	strict_msr_control = true;
+	pr_info("Enabling strict facility control\n");
+
+	return 0;
 }
+early_param("ppc_strict_facility_enable", enable_strict_msr_control);
 
-void giveup_altivec_maybe_transactional(struct task_struct *tsk)
+void msr_check_and_set(unsigned long bits)
 {
-	/*
-	 * If we are saving the current thread's registers, and the
-	 * thread is in a transactional state, set the TIF_RESTORE_TM
-	 * bit so that we know to restore the registers before
-	 * returning to userspace.
-	 */
-	if (tsk == current && tsk->thread.regs &&
-	    MSR_TM_ACTIVE(tsk->thread.regs->msr) &&
-	    !test_thread_flag(TIF_RESTORE_TM)) {
-		tsk->thread.ckpt_regs.msr = tsk->thread.regs->msr;
-		set_thread_flag(TIF_RESTORE_TM);
-	}
+	unsigned long oldmsr = mfmsr();
+	unsigned long newmsr;
+
+	newmsr = oldmsr | bits;
+
+#ifdef CONFIG_VSX
+	if (cpu_has_feature(CPU_FTR_VSX) && (bits & MSR_FP))
+		newmsr |= MSR_VSX;
+#endif
 
-	giveup_altivec(tsk);
+	if (oldmsr != newmsr)
+		mtmsr_isync(newmsr);
 }
 
-#else
-#define giveup_fpu_maybe_transactional(tsk)	giveup_fpu(tsk)
-#define giveup_altivec_maybe_transactional(tsk)	giveup_altivec(tsk)
-#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
+void __msr_check_and_clear(unsigned long bits)
+{
+	unsigned long oldmsr = mfmsr();
+	unsigned long newmsr;
+
+	newmsr = oldmsr & ~bits;
+
+#ifdef CONFIG_VSX
+	if (cpu_has_feature(CPU_FTR_VSX) && (bits & MSR_FP))
+		newmsr &= ~MSR_VSX;
+#endif
+
+	if (oldmsr != newmsr)
+		mtmsr_isync(newmsr);
+}
+EXPORT_SYMBOL(__msr_check_and_clear);
 
 #ifdef CONFIG_PPC_FPU
+void __giveup_fpu(struct task_struct *tsk)
+{
+	save_fpu(tsk);
+	tsk->thread.regs->msr &= ~MSR_FP;
+#ifdef CONFIG_VSX
+	if (cpu_has_feature(CPU_FTR_VSX))
+		tsk->thread.regs->msr &= ~MSR_VSX;
+#endif
+}
+
+void giveup_fpu(struct task_struct *tsk)
+{
+	check_if_tm_restore_required(tsk);
+
+	msr_check_and_set(MSR_FP);
+	__giveup_fpu(tsk);
+	msr_check_and_clear(MSR_FP);
+}
+EXPORT_SYMBOL(giveup_fpu);
+
 /*
  * Make sure the floating-point register state in the
  * the thread_struct is up to date for task tsk.
@@ -134,52 +170,79 @@ void flush_fp_to_thread(struct task_struct *tsk)
 		 */
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_FP) {
-#ifdef CONFIG_SMP
 			/*
 			 * This should only ever be called for current or
 			 * for a stopped child process.  Since we save away
-			 * the FP register state on context switch on SMP,
+			 * the FP register state on context switch,
 			 * there is something wrong if a stopped child appears
 			 * to still have its FP state in the CPU registers.
 			 */
 			BUG_ON(tsk != current);
-#endif
-			giveup_fpu_maybe_transactional(tsk);
+			giveup_fpu(tsk);
 		}
 		preempt_enable();
 	}
 }
 EXPORT_SYMBOL_GPL(flush_fp_to_thread);
-#endif /* CONFIG_PPC_FPU */
 
 void enable_kernel_fp(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
-	if (current->thread.regs && (current->thread.regs->msr & MSR_FP))
-		giveup_fpu_maybe_transactional(current);
-	else
-		giveup_fpu(NULL);	/* just enables FP for kernel */
-#else
-	giveup_fpu_maybe_transactional(last_task_used_math);
-#endif /* CONFIG_SMP */
+	msr_check_and_set(MSR_FP);
+
+	if (current->thread.regs && (current->thread.regs->msr & MSR_FP)) {
+		check_if_tm_restore_required(current);
+		__giveup_fpu(current);
+	}
 }
 EXPORT_SYMBOL(enable_kernel_fp);
 
+static int restore_fp(struct task_struct *tsk) {
+	if (tsk->thread.load_fp) {
+		load_fp_state(&current->thread.fp_state);
+		current->thread.load_fp++;
+		return 1;
+	}
+	return 0;
+}
+#else
+static int restore_fp(struct task_struct *tsk) { return 0; }
+#endif /* CONFIG_PPC_FPU */
+
 #ifdef CONFIG_ALTIVEC
+#define loadvec(thr) ((thr).load_vec)
+
+static void __giveup_altivec(struct task_struct *tsk)
+{
+	save_altivec(tsk);
+	tsk->thread.regs->msr &= ~MSR_VEC;
+#ifdef CONFIG_VSX
+	if (cpu_has_feature(CPU_FTR_VSX))
+		tsk->thread.regs->msr &= ~MSR_VSX;
+#endif
+}
+
+void giveup_altivec(struct task_struct *tsk)
+{
+	check_if_tm_restore_required(tsk);
+
+	msr_check_and_set(MSR_VEC);
+	__giveup_altivec(tsk);
+	msr_check_and_clear(MSR_VEC);
+}
+EXPORT_SYMBOL(giveup_altivec);
+
 void enable_kernel_altivec(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
-	if (current->thread.regs && (current->thread.regs->msr & MSR_VEC))
-		giveup_altivec_maybe_transactional(current);
-	else
-		giveup_altivec_notask();
-#else
-	giveup_altivec_maybe_transactional(last_task_used_altivec);
-#endif /* CONFIG_SMP */
+	msr_check_and_set(MSR_VEC);
+
+	if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) {
+		check_if_tm_restore_required(current);
+		__giveup_altivec(current);
+	}
 }
 EXPORT_SYMBOL(enable_kernel_altivec);
 
@@ -192,71 +255,122 @@ void flush_altivec_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_VEC) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
-			giveup_altivec_maybe_transactional(tsk);
+			giveup_altivec(tsk);
 		}
 		preempt_enable();
 	}
 }
 EXPORT_SYMBOL_GPL(flush_altivec_to_thread);
-#endif /* CONFIG_ALTIVEC */
 
-#ifdef CONFIG_VSX
-void enable_kernel_vsx(void)
+static int restore_altivec(struct task_struct *tsk)
 {
-	WARN_ON(preemptible());
+	if (cpu_has_feature(CPU_FTR_ALTIVEC) && tsk->thread.load_vec) {
+		load_vr_state(&tsk->thread.vr_state);
+		tsk->thread.used_vr = 1;
+		tsk->thread.load_vec++;
 
-#ifdef CONFIG_SMP
-	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX))
-		giveup_vsx(current);
-	else
-		giveup_vsx(NULL);	/* just enable vsx for kernel - force */
+		return 1;
+	}
+	return 0;
+}
 #else
-	giveup_vsx(last_task_used_vsx);
-#endif /* CONFIG_SMP */
+#define loadvec(thr) 0
+static inline int restore_altivec(struct task_struct *tsk) { return 0; }
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_VSX
+static void __giveup_vsx(struct task_struct *tsk)
+{
+	if (tsk->thread.regs->msr & MSR_FP)
+		__giveup_fpu(tsk);
+	if (tsk->thread.regs->msr & MSR_VEC)
+		__giveup_altivec(tsk);
+	tsk->thread.regs->msr &= ~MSR_VSX;
 }
-EXPORT_SYMBOL(enable_kernel_vsx);
 
-void giveup_vsx(struct task_struct *tsk)
+static void giveup_vsx(struct task_struct *tsk)
 {
-	giveup_fpu_maybe_transactional(tsk);
-	giveup_altivec_maybe_transactional(tsk);
+	check_if_tm_restore_required(tsk);
+
+	msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX);
 	__giveup_vsx(tsk);
+	msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX);
+}
+
+static void save_vsx(struct task_struct *tsk)
+{
+	if (tsk->thread.regs->msr & MSR_FP)
+		save_fpu(tsk);
+	if (tsk->thread.regs->msr & MSR_VEC)
+		save_altivec(tsk);
+}
+
+void enable_kernel_vsx(void)
+{
+	WARN_ON(preemptible());
+
+	msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX);
+
+	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX)) {
+		check_if_tm_restore_required(current);
+		if (current->thread.regs->msr & MSR_FP)
+			__giveup_fpu(current);
+		if (current->thread.regs->msr & MSR_VEC)
+			__giveup_altivec(current);
+		__giveup_vsx(current);
+	}
 }
-EXPORT_SYMBOL(giveup_vsx);
+EXPORT_SYMBOL(enable_kernel_vsx);
 
 void flush_vsx_to_thread(struct task_struct *tsk)
 {
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_VSX) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			giveup_vsx(tsk);
 		}
 		preempt_enable();
 	}
 }
 EXPORT_SYMBOL_GPL(flush_vsx_to_thread);
+
+static int restore_vsx(struct task_struct *tsk)
+{
+	if (cpu_has_feature(CPU_FTR_VSX)) {
+		tsk->thread.used_vsr = 1;
+		return 1;
+	}
+
+	return 0;
+}
+#else
+static inline int restore_vsx(struct task_struct *tsk) { return 0; }
+static inline void save_vsx(struct task_struct *tsk) { }
 #endif /* CONFIG_VSX */
 
 #ifdef CONFIG_SPE
+void giveup_spe(struct task_struct *tsk)
+{
+	check_if_tm_restore_required(tsk);
+
+	msr_check_and_set(MSR_SPE);
+	__giveup_spe(tsk);
+	msr_check_and_clear(MSR_SPE);
+}
+EXPORT_SYMBOL(giveup_spe);
 
 void enable_kernel_spe(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
-	if (current->thread.regs && (current->thread.regs->msr & MSR_SPE))
-		giveup_spe(current);
-	else
-		giveup_spe(NULL);	/* just enable SPE for kernel - force */
-#else
-	giveup_spe(last_task_used_spe);
-#endif /* __SMP __ */
+	msr_check_and_set(MSR_SPE);
+
+	if (current->thread.regs && (current->thread.regs->msr & MSR_SPE)) {
+		check_if_tm_restore_required(current);
+		__giveup_spe(current);
+	}
 }
 EXPORT_SYMBOL(enable_kernel_spe);
 
@@ -265,9 +379,7 @@ void flush_spe_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_SPE) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			tsk->thread.spefscr = mfspr(SPRN_SPEFSCR);
 			giveup_spe(tsk);
 		}
@@ -276,31 +388,145 @@ void flush_spe_to_thread(struct task_struct *tsk)
 }
 #endif /* CONFIG_SPE */
 
-#ifndef CONFIG_SMP
-/*
- * If we are doing lazy switching of CPU state (FP, altivec or SPE),
- * and the current task has some state, discard it.
- */
-void discard_lazy_cpu_state(void)
+static unsigned long msr_all_available;
+
+static int __init init_msr_all_available(void)
 {
-	preempt_disable();
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
+#ifdef CONFIG_PPC_FPU
+	msr_all_available |= MSR_FP;
+#endif
 #ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		msr_all_available |= MSR_VEC;
+#endif
 #ifdef CONFIG_VSX
-	if (last_task_used_vsx == current)
-		last_task_used_vsx = NULL;
-#endif /* CONFIG_VSX */
+	if (cpu_has_feature(CPU_FTR_VSX))
+		msr_all_available |= MSR_VSX;
+#endif
 #ifdef CONFIG_SPE
-	if (last_task_used_spe == current)
-		last_task_used_spe = NULL;
+	if (cpu_has_feature(CPU_FTR_SPE))
+		msr_all_available |= MSR_SPE;
 #endif
-	preempt_enable();
+
+	return 0;
 }
-#endif /* CONFIG_SMP */
+early_initcall(init_msr_all_available);
+
+void giveup_all(struct task_struct *tsk)
+{
+	unsigned long usermsr;
+
+	if (!tsk->thread.regs)
+		return;
+
+	usermsr = tsk->thread.regs->msr;
+
+	if ((usermsr & msr_all_available) == 0)
+		return;
+
+	msr_check_and_set(msr_all_available);
+
+#ifdef CONFIG_PPC_FPU
+	if (usermsr & MSR_FP)
+		__giveup_fpu(tsk);
+#endif
+#ifdef CONFIG_ALTIVEC
+	if (usermsr & MSR_VEC)
+		__giveup_altivec(tsk);
+#endif
+#ifdef CONFIG_VSX
+	if (usermsr & MSR_VSX)
+		__giveup_vsx(tsk);
+#endif
+#ifdef CONFIG_SPE
+	if (usermsr & MSR_SPE)
+		__giveup_spe(tsk);
+#endif
+
+	msr_check_and_clear(msr_all_available);
+}
+EXPORT_SYMBOL(giveup_all);
+
+void restore_math(struct pt_regs *regs)
+{
+	unsigned long msr;
+
+	if (!current->thread.load_fp && !loadvec(current->thread))
+		return;
+
+	msr = regs->msr;
+	msr_check_and_set(msr_all_available);
+
+	/*
+	 * Only reload if the bit is not set in the user MSR, the bit BEING set
+	 * indicates that the registers are hot
+	 */
+	if ((!(msr & MSR_FP)) && restore_fp(current))
+		msr |= MSR_FP | current->thread.fpexc_mode;
+
+	if ((!(msr & MSR_VEC)) && restore_altivec(current))
+		msr |= MSR_VEC;
+
+	if ((msr & (MSR_FP | MSR_VEC)) == (MSR_FP | MSR_VEC) &&
+			restore_vsx(current)) {
+		msr |= MSR_VSX;
+	}
+
+	msr_check_and_clear(msr_all_available);
+
+	regs->msr = msr;
+}
+
+void save_all(struct task_struct *tsk)
+{
+	unsigned long usermsr;
+
+	if (!tsk->thread.regs)
+		return;
+
+	usermsr = tsk->thread.regs->msr;
+
+	if ((usermsr & msr_all_available) == 0)
+		return;
+
+	msr_check_and_set(msr_all_available);
+
+	/*
+	 * Saving the way the register space is in hardware, save_vsx boils
+	 * down to a save_fpu() and save_altivec()
+	 */
+	if (usermsr & MSR_VSX) {
+		save_vsx(tsk);
+	} else {
+		if (usermsr & MSR_FP)
+			save_fpu(tsk);
+
+		if (usermsr & MSR_VEC)
+			save_altivec(tsk);
+	}
+
+	if (usermsr & MSR_SPE)
+		__giveup_spe(tsk);
+
+	msr_check_and_clear(msr_all_available);
+}
+
+void flush_all_to_thread(struct task_struct *tsk)
+{
+	if (tsk->thread.regs) {
+		preempt_disable();
+		BUG_ON(tsk != current);
+		save_all(tsk);
+
+#ifdef CONFIG_SPE
+		if (tsk->thread.regs->msr & MSR_SPE)
+			tsk->thread.spefscr = mfspr(SPRN_SPEFSCR);
+#endif
+
+		preempt_enable();
+	}
+}
+EXPORT_SYMBOL(flush_all_to_thread);
 
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 void do_send_trap(struct pt_regs *regs, unsigned long address,
@@ -551,6 +777,24 @@ static void tm_reclaim_thread(struct thread_struct *thr,
 		msr_diff &= MSR_FP | MSR_VEC | MSR_VSX | MSR_FE0 | MSR_FE1;
 	}
 
+	/*
+	 * Use the current MSR TM suspended bit to track if we have
+	 * checkpointed state outstanding.
+	 * On signal delivery, we'd normally reclaim the checkpointed
+	 * state to obtain stack pointer (see:get_tm_stackpointer()).
+	 * This will then directly return to userspace without going
+	 * through __switch_to(). However, if the stack frame is bad,
+	 * we need to exit this thread which calls __switch_to() which
+	 * will again attempt to reclaim the already saved tm state.
+	 * Hence we need to check that we've not already reclaimed
+	 * this state.
+	 * We do this using the current MSR, rather tracking it in
+	 * some specific thread_struct bit, as it has the additional
+	 * benifit of checking for a potential TM bad thing exception.
+	 */
+	if (!MSR_TM_SUSPENDED(mfmsr()))
+		return;
+
 	tm_reclaim(thr, thr->regs->msr, cause);
 
 	/* Having done the reclaim, we now have the checkpointed
@@ -725,15 +969,9 @@ void restore_tm_state(struct pt_regs *regs)
 
 	msr_diff = current->thread.ckpt_regs.msr & ~regs->msr;
 	msr_diff &= MSR_FP | MSR_VEC | MSR_VSX;
-	if (msr_diff & MSR_FP) {
-		fp_enable();
-		load_fp_state(&current->thread.fp_state);
-		regs->msr |= current->thread.fpexc_mode;
-	}
-	if (msr_diff & MSR_VEC) {
-		vec_enable();
-		load_vr_state(&current->thread.vr_state);
-	}
+
+	restore_math(regs);
+
 	regs->msr |= msr_diff;
 }
 
@@ -742,112 +980,87 @@ void restore_tm_state(struct pt_regs *regs)
 #define __switch_to_tm(prev)
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
-struct task_struct *__switch_to(struct task_struct *prev,
-	struct task_struct *new)
+static inline void save_sprs(struct thread_struct *t)
 {
-	struct thread_struct *new_thread, *old_thread;
-	struct task_struct *last;
-#ifdef CONFIG_PPC_BOOK3S_64
-	struct ppc64_tlb_batch *batch;
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		t->vrsave = mfspr(SPRN_VRSAVE);
 #endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	if (cpu_has_feature(CPU_FTR_DSCR))
+		t->dscr = mfspr(SPRN_DSCR);
 
-	WARN_ON(!irqs_disabled());
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		t->bescr = mfspr(SPRN_BESCR);
+		t->ebbhr = mfspr(SPRN_EBBHR);
+		t->ebbrr = mfspr(SPRN_EBBRR);
 
-	/* Back up the TAR and DSCR across context switches.
-	 * Note that the TAR is not available for use in the kernel.  (To
-	 * provide this, the TAR should be backed up/restored on exception
-	 * entry/exit instead, and be in pt_regs.  FIXME, this should be in
-	 * pt_regs anyway (for debug).)
-	 * Save the TAR and DSCR here before we do treclaim/trecheckpoint as
-	 * these will change them.
-	 */
-	save_early_sprs(&prev->thread);
+		t->fscr = mfspr(SPRN_FSCR);
 
-	__switch_to_tm(prev);
+		/*
+		 * Note that the TAR is not available for use in the kernel.
+		 * (To provide this, the TAR should be backed up/restored on
+		 * exception entry/exit instead, and be in pt_regs.  FIXME,
+		 * this should be in pt_regs anyway (for debug).)
+		 */
+		t->tar = mfspr(SPRN_TAR);
+	}
+#endif
+}
 
-#ifdef CONFIG_SMP
-	/* avoid complexity of lazy save/restore of fpu
-	 * by just saving it every time we switch out if
-	 * this task used the fpu during the last quantum.
-	 *
-	 * If it tries to use the fpu again, it'll trap and
-	 * reload its fp regs.  So we don't have to do a restore
-	 * every switch, just a save.
-	 *  -- Cort
-	 */
-	if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP))
-		giveup_fpu(prev);
+static inline void restore_sprs(struct thread_struct *old_thread,
+				struct thread_struct *new_thread)
+{
 #ifdef CONFIG_ALTIVEC
-	/*
-	 * If the previous thread used altivec in the last quantum
-	 * (thus changing altivec regs) then save them.
-	 * We used to check the VRSAVE register but not all apps
-	 * set it, so we don't rely on it now (and in fact we need
-	 * to save & restore VSCR even if VRSAVE == 0).  -- paulus
-	 *
-	 * On SMP we always save/restore altivec regs just to avoid the
-	 * complexity of changing processors.
-	 *  -- Cort
-	 */
-	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
-		giveup_altivec(prev);
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX))
-		/* VMX and FPU registers are already save here */
-		__giveup_vsx(prev);
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-	/*
-	 * If the previous thread used spe in the last quantum
-	 * (thus changing spe regs) then save them.
-	 *
-	 * On SMP we always save/restore spe regs just to avoid the
-	 * complexity of changing processors.
-	 */
-	if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE)))
-		giveup_spe(prev);
-#endif /* CONFIG_SPE */
+	if (cpu_has_feature(CPU_FTR_ALTIVEC) &&
+	    old_thread->vrsave != new_thread->vrsave)
+		mtspr(SPRN_VRSAVE, new_thread->vrsave);
+#endif
+#ifdef CONFIG_PPC_BOOK3S_64
+	if (cpu_has_feature(CPU_FTR_DSCR)) {
+		u64 dscr = get_paca()->dscr_default;
+		u64 fscr = old_thread->fscr & ~FSCR_DSCR;
 
-#else  /* CONFIG_SMP */
-#ifdef CONFIG_ALTIVEC
-	/* Avoid the trap.  On smp this this never happens since
-	 * we don't set last_task_used_altivec -- Cort
-	 */
-	if (new->thread.regs && last_task_used_altivec == new)
-		new->thread.regs->msr |= MSR_VEC;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-	if (new->thread.regs && last_task_used_vsx == new)
-		new->thread.regs->msr |= MSR_VSX;
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-	/* Avoid the trap.  On smp this this never happens since
-	 * we don't set last_task_used_spe
-	 */
-	if (new->thread.regs && last_task_used_spe == new)
-		new->thread.regs->msr |= MSR_SPE;
-#endif /* CONFIG_SPE */
+		if (new_thread->dscr_inherit) {
+			dscr = new_thread->dscr;
+			fscr |= FSCR_DSCR;
+		}
 
-#endif /* CONFIG_SMP */
+		if (old_thread->dscr != dscr)
+			mtspr(SPRN_DSCR, dscr);
 
-#ifdef CONFIG_PPC_ADV_DEBUG_REGS
-	switch_booke_debug_regs(&new->thread.debug);
-#else
-/*
- * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
- * schedule DABR
- */
-#ifndef CONFIG_HAVE_HW_BREAKPOINT
-	if (unlikely(!hw_brk_match(this_cpu_ptr(&current_brk), &new->thread.hw_brk)))
-		__set_breakpoint(&new->thread.hw_brk);
-#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+		if (old_thread->fscr != fscr)
+			mtspr(SPRN_FSCR, fscr);
+	}
+
+	if (cpu_has_feature(CPU_FTR_ARCH_207S)) {
+		if (old_thread->bescr != new_thread->bescr)
+			mtspr(SPRN_BESCR, new_thread->bescr);
+		if (old_thread->ebbhr != new_thread->ebbhr)
+			mtspr(SPRN_EBBHR, new_thread->ebbhr);
+		if (old_thread->ebbrr != new_thread->ebbrr)
+			mtspr(SPRN_EBBRR, new_thread->ebbrr);
+
+		if (old_thread->tar != new_thread->tar)
+			mtspr(SPRN_TAR, new_thread->tar);
+	}
 #endif
+}
 
+struct task_struct *__switch_to(struct task_struct *prev,
+	struct task_struct *new)
+{
+	struct thread_struct *new_thread, *old_thread;
+	struct task_struct *last;
+#ifdef CONFIG_PPC_BOOK3S_64
+	struct ppc64_tlb_batch *batch;
+#endif
 
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
+	WARN_ON(!irqs_disabled());
+
 #ifdef CONFIG_PPC64
 	/*
 	 * Collect processor utilization data per process
@@ -872,6 +1085,30 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	}
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
+#ifdef CONFIG_PPC_ADV_DEBUG_REGS
+	switch_booke_debug_regs(&new->thread.debug);
+#else
+/*
+ * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would
+ * schedule DABR
+ */
+#ifndef CONFIG_HAVE_HW_BREAKPOINT
+	if (unlikely(!hw_brk_match(this_cpu_ptr(&current_brk), &new->thread.hw_brk)))
+		__set_breakpoint(&new->thread.hw_brk);
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+#endif
+
+	/*
+	 * We need to save SPRs before treclaim/trecheckpoint as these will
+	 * change a number of them.
+	 */
+	save_sprs(&prev->thread);
+
+	__switch_to_tm(prev);
+
+	/* Save FPU, Altivec, VSX and SPE state */
+	giveup_all(prev);
+
 	/*
 	 * We can't take a PMU exception inside _switch() since there is a
 	 * window where the kernel stack SLB and the kernel stack are out
@@ -881,6 +1118,15 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 	tm_recheckpoint_new_task(new);
 
+	/*
+	 * Call restore_sprs() before calling _switch(). If we move it after
+	 * _switch() then we miss out on calling it for new tasks. The reason
+	 * for this is we manually create a stack frame for new tasks that
+	 * directly returns through ret_from_fork() or
+	 * ret_from_kernel_thread(). See copy_thread() for details.
+	 */
+	restore_sprs(old_thread, new_thread);
+
 	last = _switch(old_thread, new_thread);
 
 #ifdef CONFIG_PPC_BOOK3S_64
@@ -889,6 +1135,10 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		batch = this_cpu_ptr(&ppc64_tlb_batch);
 		batch->active = 1;
 	}
+
+	if (current_thread_info()->task->thread.regs)
+		restore_math(current_thread_info()->task->thread.regs);
+
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
 	return last;
@@ -934,10 +1184,12 @@ static void show_instructions(struct pt_regs *regs)
 	printk("\n");
 }
 
-static struct regbit {
+struct regbit {
 	unsigned long bit;
 	const char *name;
-} msr_bits[] = {
+};
+
+static struct regbit msr_bits[] = {
 #if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE)
 	{MSR_SF,	"SF"},
 	{MSR_HV,	"HV"},
@@ -967,16 +1219,49 @@ static struct regbit {
 	{0,		NULL}
 };
 
-static void printbits(unsigned long val, struct regbit *bits)
+static void print_bits(unsigned long val, struct regbit *bits, const char *sep)
 {
-	const char *sep = "";
+	const char *s = "";
 
-	printk("<");
 	for (; bits->bit; ++bits)
 		if (val & bits->bit) {
-			printk("%s%s", sep, bits->name);
-			sep = ",";
+			printk("%s%s", s, bits->name);
+			s = sep;
 		}
+}
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+static struct regbit msr_tm_bits[] = {
+	{MSR_TS_T,	"T"},
+	{MSR_TS_S,	"S"},
+	{MSR_TM,	"E"},
+	{0,		NULL}
+};
+
+static void print_tm_bits(unsigned long val)
+{
+/*
+ * This only prints something if at least one of the TM bit is set.
+ * Inside the TM[], the output means:
+ *   E: Enabled		(bit 32)
+ *   S: Suspended	(bit 33)
+ *   T: Transactional	(bit 34)
+ */
+	if (val & (MSR_TM | MSR_TS_S | MSR_TS_T)) {
+		printk(",TM[");
+		print_bits(val, msr_tm_bits, "");
+		printk("]");
+	}
+}
+#else
+static void print_tm_bits(unsigned long val) {}
+#endif
+
+static void print_msr_bits(unsigned long val)
+{
+	printk("<");
+	print_bits(val, msr_bits, ",");
+	print_tm_bits(val);
 	printk(">");
 }
 
@@ -1001,7 +1286,7 @@ void show_regs(struct pt_regs * regs)
 	printk("REGS: %p TRAP: %04lx   %s  (%s)\n",
 	       regs, regs->trap, print_tainted(), init_utsname()->release);
 	printk("MSR: "REG" ", regs->msr);
-	printbits(regs->msr, msr_bits);
+	print_msr_bits(regs->msr);
 	printk("  CR: %08lx  XER: %08lx\n", regs->ccr, regs->xer);
 	trap = TRAP(regs);
 	if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
@@ -1043,13 +1328,10 @@ void show_regs(struct pt_regs * regs)
 
 void exit_thread(void)
 {
-	discard_lazy_cpu_state();
 }
 
 void flush_thread(void)
 {
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	flush_ptrace_hw_breakpoint(current);
 #else /* CONFIG_HAVE_HW_BREAKPOINT */
@@ -1068,10 +1350,7 @@ release_thread(struct task_struct *t)
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	flush_fp_to_thread(src);
-	flush_altivec_to_thread(src);
-	flush_vsx_to_thread(src);
-	flush_spe_to_thread(src);
+	flush_all_to_thread(src);
 	/*
 	 * Flush TM state out so we can copy it.  __switch_to_tm() does this
 	 * flush but it removes the checkpointed state from the current CPU and
@@ -1161,6 +1440,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 
 		f = ret_from_fork;
 	}
+	childregs->msr &= ~(MSR_FP|MSR_VEC|MSR_VSX);
 	sp -= STACK_FRAME_OVERHEAD;
 
 	/*
@@ -1194,7 +1474,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 #ifdef CONFIG_PPC64 
 	if (cpu_has_feature(CPU_FTR_DSCR)) {
 		p->thread.dscr_inherit = current->thread.dscr_inherit;
-		p->thread.dscr = current->thread.dscr;
+		p->thread.dscr = mfspr(SPRN_DSCR);
 	}
 	if (cpu_has_feature(CPU_FTR_HAS_PPR))
 		p->thread.ppr = INIT_PPR;
@@ -1287,7 +1567,6 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 		regs->msr = MSR_USER32;
 	}
 #endif
-	discard_lazy_cpu_state();
 #ifdef CONFIG_VSX
 	current->thread.used_vsr = 0;
 #endif
@@ -1623,9 +1902,9 @@ static inline unsigned long brk_rnd(void)
 
 	/* 8MB for 32bit, 1GB for 64bit */
 	if (is_32bit_task())
-		rnd = (long)(get_random_int() % (1<<(23-PAGE_SHIFT)));
+		rnd = (get_random_long() % (1UL<<(23-PAGE_SHIFT)));
 	else
-		rnd = (long)(get_random_int() % (1<<(30-PAGE_SHIFT)));
+		rnd = (get_random_long() % (1UL<<(30-PAGE_SHIFT)));
 
 	return rnd << PAGE_SHIFT;
 }
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 92dea8df6b26..da5192590c44 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -389,6 +389,7 @@ static void __init prom_printf(const char *format, ...)
 			break;
 		}
 	}
+	va_end(args);
 }
 
 
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 737c0d0b53ac..30a03c03fe73 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -60,6 +60,7 @@ struct pt_regs_offset {
 #define STR(s)	#s			/* convert to string */
 #define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
 #define GPR_OFFSET_NAME(num)	\
+	{.name = STR(r##num), .offset = offsetof(struct pt_regs, gpr[num])}, \
 	{.name = STR(gpr##num), .offset = offsetof(struct pt_regs, gpr[num])}
 #define REG_OFFSET_END {.name = NULL, .offset = 0}
 
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 5a753fae8265..28736ff27fea 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -44,6 +44,9 @@
 #include <asm/mmu.h>
 #include <asm/topology.h>
 
+/* This is here deliberately so it's only used in this file */
+void enter_rtas(unsigned long);
+
 struct rtas_t rtas = {
 	.lock = __ARCH_SPIN_LOCK_UNLOCKED
 };
@@ -93,21 +96,13 @@ static void unlock_rtas(unsigned long flags)
  */
 static void call_rtas_display_status(unsigned char c)
 {
-	struct rtas_args *args = &rtas.args;
 	unsigned long s;
 
 	if (!rtas.base)
 		return;
-	s = lock_rtas();
-
-	args->token = cpu_to_be32(10);
-	args->nargs = cpu_to_be32(1);
-	args->nret  = cpu_to_be32(1);
-	args->rets  = &(args->args[1]);
-	args->args[0] = cpu_to_be32(c);
-
-	enter_rtas(__pa(args));
 
+	s = lock_rtas();
+	rtas_call_unlocked(&rtas.args, 10, 1, 1, NULL, c);
 	unlock_rtas(s);
 }
 
@@ -418,6 +413,36 @@ static char *__fetch_rtas_last_error(char *altbuf)
 #define get_errorlog_buffer()		NULL
 #endif
 
+
+static void
+va_rtas_call_unlocked(struct rtas_args *args, int token, int nargs, int nret,
+		      va_list list)
+{
+	int i;
+
+	args->token = cpu_to_be32(token);
+	args->nargs = cpu_to_be32(nargs);
+	args->nret  = cpu_to_be32(nret);
+	args->rets  = &(args->args[nargs]);
+
+	for (i = 0; i < nargs; ++i)
+		args->args[i] = cpu_to_be32(va_arg(list, __u32));
+
+	for (i = 0; i < nret; ++i)
+		args->rets[i] = 0;
+
+	enter_rtas(__pa(args));
+}
+
+void rtas_call_unlocked(struct rtas_args *args, int token, int nargs, int nret, ...)
+{
+	va_list list;
+
+	va_start(list, nret);
+	va_rtas_call_unlocked(args, token, nargs, nret, list);
+	va_end(list);
+}
+
 int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 {
 	va_list list;
@@ -431,22 +456,14 @@ int rtas_call(int token, int nargs, int nret, int *outputs, ...)
 		return -1;
 
 	s = lock_rtas();
+
+	/* We use the global rtas args buffer */
 	rtas_args = &rtas.args;
 
-	rtas_args->token = cpu_to_be32(token);
-	rtas_args->nargs = cpu_to_be32(nargs);
-	rtas_args->nret  = cpu_to_be32(nret);
-	rtas_args->rets  = &(rtas_args->args[nargs]);
 	va_start(list, outputs);
-	for (i = 0; i < nargs; ++i)
-		rtas_args->args[i] = cpu_to_be32(va_arg(list, __u32));
+	va_rtas_call_unlocked(rtas_args, token, nargs, nret, list);
 	va_end(list);
 
-	for (i = 0; i < nret; ++i)
-		rtas_args->rets[i] = 0;
-
-	enter_rtas(__pa(rtas_args));
-
 	/* A -1 return code indicates that the last command couldn't
 	   be completed due to a hardware error. */
 	if (be32_to_cpu(rtas_args->rets[0]) == -1)
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 5a2c049c1c61..aa610ce8742f 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -49,7 +49,7 @@ static unsigned int rtas_error_log_buffer_max;
 static unsigned int event_scan;
 static unsigned int rtas_event_scan_rate;
 
-static int full_rtas_msgs = 0;
+static bool full_rtas_msgs;
 
 /* Stop logging to nvram after first fatal error */
 static int logging_enabled; /* Until we initialize everything,
@@ -592,11 +592,6 @@ __setup("surveillance=", surveillance_setup);
 
 static int __init rtasmsgs_setup(char *str)
 {
-	if (strcmp(str, "on") == 0)
-		full_rtas_msgs = 1;
-	else if (strcmp(str, "off") == 0)
-		full_rtas_msgs = 0;
-
-	return 1;
+	return (kstrtobool(str, &full_rtas_msgs) == 0);
 }
 __setup("rtasmsgs=", rtasmsgs_setup);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index ad8c9db61237..d544fa311757 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -114,8 +114,6 @@ extern unsigned int memset_nocache_branch; /* Insn to be replaced by NOP */
 
 notrace void __init machine_init(u64 dt_ptr)
 {
-	lockdep_init();
-
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 5c03a6a9b054..f98be8383a39 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -255,9 +255,6 @@ void __init early_setup(unsigned long dt_ptr)
 	setup_paca(&boot_paca);
 	fixup_boot_paca();
 
-	/* Initialize lockdep early or else spinlocks will blow */
-	lockdep_init();
-
 	/* -------- printk is now safe to use ------- */
 
 	/* Enable early debugging if any specified (see udbg.h) */
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index cf8c7e4e0b21..cb64d6feb45a 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -1,7 +1,7 @@
 /*
  * Common signal handling code for both 32 and 64 bits
  *
- *    Copyright (c) 2007 Benjamin Herrenschmidt, IBM Coproration
+ *    Copyright (c) 2007 Benjamin Herrenschmidt, IBM Corporation
  *    Extracted from signal_32.c and signal_64.c
  *
  * This file is subject to the terms and conditions of the GNU General
@@ -178,7 +178,7 @@ unsigned long get_tm_stackpointer(struct pt_regs *regs)
 	 * need to use the stack pointer from the checkpointed state, rather
 	 * than the speculated state.  This ensures that the signal context
 	 * (written tm suspended) will be written below the stack required for
-	 * the rollback.  The transaction is aborted becuase of the treclaim,
+	 * the rollback.  The transaction is aborted because of the treclaim,
 	 * so any memory written between the tbegin and the signal will be
 	 * rolled back anyway.
 	 *
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 51b274199dd9..be305c858e51 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -1,5 +1,5 @@
 /*
- *    Copyright (c) 2007 Benjamin Herrenschmidt, IBM Coproration
+ *    Copyright (c) 2007 Benjamin Herrenschmidt, IBM Corporation
  *    Extracted from signal_32.c and signal_64.c
  *
  * This file is subject to the terms and conditions of the GNU General
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 0dbee465af7a..b6aa378aff63 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -458,7 +458,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 	 * contains valid data
 	 */
 	if (current->thread.used_vsr && ctx_has_vsx_region) {
-		__giveup_vsx(current);
+		flush_vsx_to_thread(current);
 		if (copy_vsx_to_user(&frame->mc_vsregs, current))
 			return 1;
 		msr |= MSR_VSX;
@@ -606,7 +606,7 @@ static int save_tm_user_regs(struct pt_regs *regs,
 	 * contains valid data
 	 */
 	if (current->thread.used_vsr) {
-		__giveup_vsx(current);
+		flush_vsx_to_thread(current);
 		if (copy_vsx_to_user(&frame->mc_vsregs, current))
 			return 1;
 		if (msr & MSR_VSX) {
@@ -687,15 +687,6 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (sig)
 		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr/evr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec/SPE, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_ALTIVEC
 	/*
 	 * Force the process to reload the altivec registers from
@@ -798,15 +789,6 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	/* Restore the previous little-endian mode */
 	regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr/evr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec/SPE, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_ALTIVEC
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
@@ -875,6 +857,15 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 		return 1;
 #endif /* CONFIG_SPE */
 
+	/* Get the top half of the MSR from the user context */
+	if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
+		return 1;
+	msr_hi <<= 32;
+	/* If TM bits are set to the reserved value, it's an invalid context */
+	if (MSR_TM_RESV(msr_hi))
+		return 1;
+	/* Pull in the MSR TM bits from the user context */
+	regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr_hi & MSR_TS_MASK);
 	/* Now, recheckpoint.  This loads up all of the checkpointed (older)
 	 * registers, including FP and V[S]Rs.  After recheckpointing, the
 	 * transactional versions should be loaded.
@@ -884,11 +875,6 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	current->thread.tm_texasr |= TEXASR_FS;
 	/* This loads the checkpointed FP/VEC state, if used */
 	tm_recheckpoint(&current->thread, msr);
-	/* Get the top half of the MSR */
-	if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
-		return 1;
-	/* Pull in MSR TM from user context */
-	regs->msr = (regs->msr & ~MSR_TS_MASK) | ((msr_hi<<32) & MSR_TS_MASK);
 
 	/* This loads the speculative FP/VEC state, if used */
 	if (msr & MSR_FP) {
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 20756dfb9f34..25520794aa37 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -147,7 +147,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	 * VMX data.
 	 */
 	if (current->thread.used_vsr && ctx_has_vsx_region) {
-		__giveup_vsx(current);
+		flush_vsx_to_thread(current);
 		v_regs += ELF_NVRREG;
 		err |= copy_vsx_to_user(v_regs, current);
 		/* set MSR_VSX in the MSR value in the frame to
@@ -270,7 +270,7 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
 	 * VMX data.
 	 */
 	if (current->thread.used_vsr) {
-		__giveup_vsx(current);
+		flush_vsx_to_thread(current);
 		v_regs += ELF_NVRREG;
 		tm_v_regs += ELF_NVRREG;
 
@@ -350,15 +350,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 		err |=  __get_user(set->sig[0], &sc->oldmask);
 
 	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
-	/*
 	 * Force reload of FP/VEC.
 	 * This has to be done before copying stuff into current->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
@@ -438,6 +429,10 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 
 	/* get MSR separately, transfer the LE bit if doing signal return */
 	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
+	/* Don't allow reserved mode. */
+	if (MSR_TM_RESV(msr))
+		return -EINVAL;
+
 	/* pull in MSR TM from user context */
 	regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK);
 
@@ -465,15 +460,6 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
 
 	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
-	/*
 	 * Force reload of FP/VEC.
 	 * This has to be done before copying stuff into current->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ec9ec2058d2d..8cac1eb41466 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -206,7 +206,7 @@ int smp_request_message_ipi(int virq, int msg)
 
 #ifdef CONFIG_PPC_SMP_MUXED_IPI
 struct cpu_messages {
-	int messages;			/* current messages */
+	long messages;			/* current messages */
 	unsigned long data;		/* data for cause ipi */
 };
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct cpu_messages, ipi_message);
@@ -218,7 +218,7 @@ void smp_muxed_ipi_set_data(int cpu, unsigned long data)
 	info->data = data;
 }
 
-void smp_muxed_ipi_message_pass(int cpu, int msg)
+void smp_muxed_ipi_set_message(int cpu, int msg)
 {
 	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
 	char *message = (char *)&info->messages;
@@ -228,6 +228,13 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
 	 */
 	smp_mb();
 	message[msg] = 1;
+}
+
+void smp_muxed_ipi_message_pass(int cpu, int msg)
+{
+	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
+
+	smp_muxed_ipi_set_message(cpu, msg);
 	/*
 	 * cause_ipi functions are required to include a full barrier
 	 * before doing whatever causes the IPI.
@@ -236,20 +243,31 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
 }
 
 #ifdef __BIG_ENDIAN__
-#define IPI_MESSAGE(A) (1 << (24 - 8 * (A)))
+#define IPI_MESSAGE(A) (1uL << ((BITS_PER_LONG - 8) - 8 * (A)))
 #else
-#define IPI_MESSAGE(A) (1 << (8 * (A)))
+#define IPI_MESSAGE(A) (1uL << (8 * (A)))
 #endif
 
 irqreturn_t smp_ipi_demux(void)
 {
 	struct cpu_messages *info = this_cpu_ptr(&ipi_message);
-	unsigned int all;
+	unsigned long all;
 
 	mb();	/* order any irq clear */
 
 	do {
 		all = xchg(&info->messages, 0);
+#if defined(CONFIG_KVM_XICS) && defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE)
+		/*
+		 * Must check for PPC_MSG_RM_HOST_ACTION messages
+		 * before PPC_MSG_CALL_FUNCTION messages because when
+		 * a VM is destroyed, we call kick_all_cpus_sync()
+		 * to ensure that any pending PPC_MSG_RM_HOST_ACTION
+		 * messages have completed before we free any VCPUs.
+		 */
+		if (all & IPI_MESSAGE(PPC_MSG_RM_HOST_ACTION))
+			kvmppc_xics_ipi_action();
+#endif
 		if (all & IPI_MESSAGE(PPC_MSG_CALL_FUNCTION))
 			generic_smp_call_function_interrupt();
 		if (all & IPI_MESSAGE(PPC_MSG_RESCHEDULE))
@@ -427,7 +445,7 @@ void generic_cpu_die(unsigned int cpu)
 
 	for (i = 0; i < 100; i++) {
 		smp_rmb();
-		if (per_cpu(cpu_state, cpu) == CPU_DEAD)
+		if (is_cpu_dead(cpu))
 			return;
 		msleep(100);
 	}
@@ -454,6 +472,11 @@ int generic_check_cpu_restart(unsigned int cpu)
 	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
 }
 
+int is_cpu_dead(unsigned int cpu)
+{
+	return per_cpu(cpu_state, cpu) == CPU_DEAD;
+}
+
 static bool secondaries_inhibited(void)
 {
 	return kvm_hv_mode_active();
@@ -727,7 +750,7 @@ void start_secondary(void *unused)
 
 	local_irq_enable();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 
 	BUG();
 }
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index ea43a347a104..4f24606afc3f 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -61,3 +61,10 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 	save_context_stack(trace, tsk->thread.ksp, tsk, 0);
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
+
+void
+save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
+{
+	save_context_stack(trace, regs->gpr[1], current, 0);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_regs);
diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c
index eae33e10b65f..6669b1752512 100644
--- a/arch/powerpc/kernel/swsusp.c
+++ b/arch/powerpc/kernel/swsusp.c
@@ -20,9 +20,7 @@ void save_processor_state(void)
 	 * flush out all the special registers so we don't need
 	 * to save them in the snapshot
 	 */
-	flush_fp_to_thread(current);
-	flush_altivec_to_thread(current);
-	flush_spe_to_thread(current);
+	flush_all_to_thread(current);
 
 #ifdef CONFIG_PPC64
 	hard_irq_disable();
diff --git a/arch/powerpc/kernel/systbl_chk.c b/arch/powerpc/kernel/systbl_chk.c
index 2384129f5893..55323a620cfe 100644
--- a/arch/powerpc/kernel/systbl_chk.c
+++ b/arch/powerpc/kernel/systbl_chk.c
@@ -57,4 +57,4 @@
 
 START_TABLE
 #include <asm/systbl.h>
-END_TABLE __NR_syscalls
+END_TABLE NR_syscalls
diff --git a/arch/powerpc/kernel/systbl_chk.sh b/arch/powerpc/kernel/systbl_chk.sh
index 19415e7674a5..31b6e7c358ca 100644
--- a/arch/powerpc/kernel/systbl_chk.sh
+++ b/arch/powerpc/kernel/systbl_chk.sh
@@ -16,7 +16,7 @@ awk	'BEGIN { num = -1; }	# Ignore the beginning of the file
 	/^START_TABLE/ { num = 0; next; }
 	/^END_TABLE/ {
 		if (num != $2) {
-			printf "__NR_syscalls (%s) is not one more than the last syscall (%s)\n",
+			printf "NR_syscalls (%s) is not one more than the last syscall (%s)\n",
 				$2, num - 1;
 			exit(1);
 		}
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 1be1092c7204..81b0900a39ee 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -1002,38 +1002,6 @@ static int month_days[12] = {
 	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
 };
 
-/*
- * This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
- */
-void GregorianDay(struct rtc_time * tm)
-{
-	int leapsToDate;
-	int lastYear;
-	int day;
-	int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
-
-	lastYear = tm->tm_year - 1;
-
-	/*
-	 * Number of leap corrections to apply up to end of last year
-	 */
-	leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400;
-
-	/*
-	 * This year is a leap year if it is divisible by 4 except when it is
-	 * divisible by 100 unless it is divisible by 400
-	 *
-	 * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was
-	 */
-	day = tm->tm_mon > 2 && leapyear(tm->tm_year);
-
-	day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
-		   tm->tm_mday;
-
-	tm->tm_wday = day % 7;
-}
-EXPORT_SYMBOL_GPL(GregorianDay);
-
 void to_tm(int tim, struct rtc_time * tm)
 {
 	register int    i;
@@ -1064,9 +1032,9 @@ void to_tm(int tim, struct rtc_time * tm)
 	tm->tm_mday = day + 1;
 
 	/*
-	 * Determine the day of week
+	 * No-one uses the day of the week.
 	 */
-	GregorianDay(tm);
+	tm->tm_wday = -1;
 }
 EXPORT_SYMBOL(to_tm);
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 37de90f8a845..9229ba63c370 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -203,9 +203,8 @@ static int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 #ifdef CONFIG_SMP
 	printk("SMP NR_CPUS=%d ", NR_CPUS);
 #endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC ");
-#endif
+	if (debug_pagealloc_enabled())
+		printk("DEBUG_PAGEALLOC ");
 #ifdef CONFIG_NUMA
 	printk("NUMA ");
 #endif
@@ -1148,6 +1147,7 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 		goto bail;
 	}
 	if (reason & REASON_TRAP) {
+		unsigned long bugaddr;
 		/* Debugger is first in line to stop recursive faults in
 		 * rcu_lock, notify_die, or atomic_notifier_call_chain */
 		if (debugger_bpt(regs))
@@ -1158,8 +1158,15 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 				== NOTIFY_STOP)
 			goto bail;
 
+		bugaddr = regs->nip;
+		/*
+		 * Fixup bugaddr for BUG_ON() in real mode
+		 */
+		if (!is_kernel_addr(bugaddr) && !(regs->msr & MSR_IR))
+			bugaddr += PAGE_OFFSET;
+
 		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
-		    report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) {
+		    report_bug(bugaddr, regs) == BUG_TRAP_TYPE_WARN) {
 			regs->nip += 4;
 			goto bail;
 		}
@@ -1313,13 +1320,6 @@ void nonrecoverable_exception(struct pt_regs *regs)
 	die("nonrecoverable exception", regs, SIGKILL);
 }
 
-void trace_syscall(struct pt_regs *regs)
-{
-	printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld    %s\n",
-	       current, task_pid_nr(current), regs->nip, regs->link, regs->gpr[0],
-	       regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted());
-}
-
 void kernel_fp_unavailable_exception(struct pt_regs *regs)
 {
 	enum ctx_state prev_state = exception_enter();
@@ -1401,7 +1401,7 @@ void facility_unavailable_exception(struct pt_regs *regs)
 		 * is a read DSCR attempt through a mfspr instruction, we
 		 * just emulate the instruction instead. This code path will
 		 * always emulate all the mfspr instructions till the user
-		 * has attempted atleast one mtspr instruction. This way it
+		 * has attempted at least one mtspr instruction. This way it
 		 * preserves the same behaviour when the user is accessing
 		 * the DSCR through privilege level only SPR number (0x11)
 		 * which is emulated through illegal instruction exception.
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index b457bfa28436..def1b8b5e6c1 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -671,7 +671,7 @@ static void __init vdso_setup_syscall_map(void)
 	extern unsigned long sys_ni_syscall;
 
 
-	for (i = 0; i < __NR_syscalls; i++) {
+	for (i = 0; i < NR_syscalls; i++) {
 #ifdef CONFIG_PPC64
 		if (sys_call_table[i*2] != sys_ni_syscall)
 			vdso_data->syscall_map_64[i >> 5] |=
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index 6abffb7a8cd9..cbabd143acae 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -15,6 +15,7 @@ targets := $(obj-vdso32) vdso32.so vdso32.so.dbg
 obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
 
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 ccflags-y := -shared -fno-common -fno-builtin
 ccflags-y += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index 59cf5f452879..3745113fcc65 100644
--- a/arch/powerpc/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -61,7 +61,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
 	addi	r3,r3,CFG_SYSCALL_MAP32
 	cmpli	cr0,r4,0
 	beqlr
-	li	r0,__NR_syscalls
+	li	r0,NR_syscalls
 	stw	r0,0(r4)
 	crclr	cr0*4+so
 	blr
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index 8c8f2ae43935..c710802b8fb6 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -8,6 +8,7 @@ targets := $(obj-vdso64) vdso64.so vdso64.so.dbg
 obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64))
 
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 ccflags-y := -shared -fno-common -fno-builtin
 ccflags-y += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index 2f01c4a0d8a0..184a6ba7f283 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -62,7 +62,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map)
 	cmpli	cr0,r4,0
 	crclr	cr0*4+so
 	beqlr
-	li	r0,__NR_syscalls
+	li	r0,NR_syscalls
 	stw	r0,0(r4)
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index f5c80d567d8d..1c2e7a343bf5 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -29,24 +29,10 @@ _GLOBAL(do_load_up_transact_altivec)
 	addi	r10,r3,THREAD_TRANSACT_VRSTATE
 	REST_32VRS(0,r4,r10)
 
-	/* Disable VEC again. */
-	MTMSRD(r6)
-	isync
-
 	blr
 #endif
 
 /*
- * Enable use of VMX/Altivec for the caller.
- */
-_GLOBAL(vec_enable)
-	mfmsr	r3
-	oris	r3,r3,MSR_VEC@h
-	MTMSRD(r3)
-	isync
-	blr
-
-/*
  * Load state from memory into VMX registers including VSCR.
  * Assumes the caller has enabled VMX in the MSR.
  */
@@ -84,39 +70,6 @@ _GLOBAL(load_up_altivec)
 	MTMSRD(r5)			/* enable use of AltiVec now */
 	isync
 
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
-	LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
-	toreal(r3)
-	PPC_LL	r4,ADDROFF(last_task_used_altivec)(r3)
-	PPC_LCMPI	0,r4,0
-	beq	1f
-
-	/* Save VMX state to last_task_used_altivec's THREAD struct */
-	toreal(r4)
-	addi	r4,r4,THREAD
-	addi	r6,r4,THREAD_VRSTATE
-	SAVE_32VRS(0,r5,r6)
-	mfvscr	v0
-	li	r10,VRSTATE_VSCR
-	stvx	v0,r10,r6
-	/* Disable VMX for last_task_used_altivec */
-	PPC_LL	r5,PT_REGS(r4)
-	toreal(r5)
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-
 	/* Hack: if we get an altivec unavailable trap with VRSAVE
 	 * set to all zeros, we assume this is a broken application
 	 * that fails to set it properly, and thus we switch it to
@@ -138,6 +91,10 @@ _GLOBAL(load_up_altivec)
 	oris	r12,r12,MSR_VEC@h
 	std	r12,_MSR(r1)
 #endif
+	/* Don't care if r4 overflows, this is desired behaviour */
+	lbz	r4,THREAD_LOAD_VEC(r5)
+	addi	r4,r4,1
+	stb	r4,THREAD_LOAD_VEC(r5)
 	addi	r6,r5,THREAD_VRSTATE
 	li	r4,1
 	li	r10,VRSTATE_VSCR
@@ -145,69 +102,24 @@ _GLOBAL(load_up_altivec)
 	lvx	v0,r10,r6
 	mtvscr	v0
 	REST_32VRS(0,r4,r6)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_altivec to 'current' */
-	subi	r4,r5,THREAD		/* Back to 'current' */
-	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_altivec)(r3)
-#endif /* CONFIG_SMP */
 	/* restore registers and return */
 	blr
 
-_GLOBAL(giveup_altivec_notask)
-	mfmsr	r3
-	andis.	r4,r3,MSR_VEC@h
-	bnelr				/* Already enabled? */
-	oris	r3,r3,MSR_VEC@h
-	SYNC
-	MTMSRD(r3)			/* enable use of VMX now */
-	isync
-	blr
-
 /*
- * giveup_altivec(tsk)
- * Disable VMX for the task given as the argument,
- * and save the vector registers in its thread_struct.
- * Enables the VMX for use in the kernel on return.
+ * save_altivec(tsk)
+ * Save the vector registers to its thread_struct
  */
-_GLOBAL(giveup_altivec)
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	SYNC
-	MTMSRD(r5)			/* enable use of VMX now */
-	isync
-	PPC_LCMPI	0,r3,0
-	beqlr				/* if no previous owner, done */
+_GLOBAL(save_altivec)
 	addi	r3,r3,THREAD		/* want THREAD of task */
 	PPC_LL	r7,THREAD_VRSAVEAREA(r3)
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r7,0
 	bne	2f
 	addi	r7,r3,THREAD_VRSTATE
-2:	PPC_LCMPI	0,r5,0
-	SAVE_32VRS(0,r4,r7)
+2:	SAVE_32VRS(0,r4,r7)
 	mfvscr	v0
 	li	r4,VRSTATE_VSCR
 	stvx	v0,r4,r7
-	beq	1f
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-#ifdef CONFIG_VSX
-BEGIN_FTR_SECTION
-	lis	r3,(MSR_VEC|MSR_VSX)@h
-FTR_SECTION_ELSE
-	lis	r3,MSR_VEC@h
-ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
-#else
-	lis	r3,MSR_VEC@h
-#endif
-	andc	r4,r4,r3		/* disable FP for previous task */
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
-	PPC_STL	r5,ADDROFF(last_task_used_altivec)(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 #ifdef CONFIG_VSX
@@ -230,20 +142,6 @@ _GLOBAL(load_up_vsx)
 	andis.	r5,r12,MSR_VEC@h
 	beql+	load_up_altivec		/* skip if already loaded */
 
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_vsx@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Disable VSX for last_task_used_vsx */
-	addi	r4,r4,THREAD
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r6,MSR_VSX@h
-	andc	r6,r4,r6
-	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
 	ld	r4,PACACURRENT(r13)
 	addi	r4,r4,THREAD		/* Get THREAD */
 	li	r6,1
@@ -251,43 +149,8 @@ _GLOBAL(load_up_vsx)
 	/* enable use of VSX after return */
 	oris	r12,r12,MSR_VSX@h
 	std	r12,_MSR(r1)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_vsx to 'current' */
-	ld	r4,PACACURRENT(r13)
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
 	b	fast_exception_return
 
-/*
- * __giveup_vsx(tsk)
- * Disable VSX for the task given as the argument.
- * Does NOT save vsx registers.
- * Enables the VSX for use in the kernel on return.
- */
-_GLOBAL(__giveup_vsx)
-	mfmsr	r5
-	oris	r5,r5,MSR_VSX@h
-	mtmsrd	r5			/* enable use of VSX now */
-	isync
-
-	cmpdi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	ld	r5,PT_REGS(r3)
-	cmpdi	0,r5,0
-	beq	1f
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VSX@h
-	andc	r4,r4,r3		/* disable VSX for previous task */
-	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_vsx@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
-	blr
-
 #endif /* CONFIG_VSX */
 
 
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index d41fd0af8980..2dd91f79de05 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -55,6 +55,7 @@ SECTIONS
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 
 #ifdef CONFIG_PPC32
 		*(.got1)
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 0570eef83fba..eba0bea6e032 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -9,6 +9,7 @@ KVM := ../../../virt/kvm
 
 common-objs-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \
 		$(KVM)/eventfd.o
+common-objs-$(CONFIG_KVM_VFIO) += $(KVM)/vfio.o
 
 CFLAGS_e500_mmu.o := -I.
 CFLAGS_e500_mmu_host.o := -I.
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 099c79d8c160..b34220d2aa42 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -366,7 +366,7 @@ int kvmppc_core_prepare_to_enter(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvmppc_core_prepare_to_enter);
 
-pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa, bool writing,
+kvm_pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa, bool writing,
 			bool *writable)
 {
 	ulong mp_pa = vcpu->arch.magic_page_pa & KVM_PAM;
@@ -379,9 +379,9 @@ pfn_t kvmppc_gpa_to_pfn(struct kvm_vcpu *vcpu, gpa_t gpa, bool writing,
 	gpa &= ~0xFFFULL;
 	if (unlikely(mp_pa) && unlikely((gpa & KVM_PAM) == mp_pa)) {
 		ulong shared_page = ((ulong)vcpu->arch.shared) & PAGE_MASK;
-		pfn_t pfn;
+		kvm_pfn_t pfn;
 
-		pfn = (pfn_t)virt_to_phys((void*)shared_page) >> PAGE_SHIFT;
+		pfn = (kvm_pfn_t)virt_to_phys((void*)shared_page) >> PAGE_SHIFT;
 		get_page(pfn_to_page(pfn));
 		if (writable)
 			*writable = true;
@@ -807,7 +807,7 @@ int kvmppc_core_init_vm(struct kvm *kvm)
 {
 
 #ifdef CONFIG_PPC64
-	INIT_LIST_HEAD(&kvm->arch.spapr_tce_tables);
+	INIT_LIST_HEAD_RCU(&kvm->arch.spapr_tce_tables);
 	INIT_LIST_HEAD(&kvm->arch.rtas_tokens);
 #endif
 
diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c
index d5c9bfeb0c9c..999106991a76 100644
--- a/arch/powerpc/kvm/book3s_32_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_32_mmu_host.c
@@ -22,7 +22,7 @@
 
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
-#include <asm/mmu-hash32.h>
+#include <asm/book3s/32/mmu-hash.h>
 #include <asm/machdep.h>
 #include <asm/mmu_context.h>
 #include <asm/hw_irq.h>
@@ -142,7 +142,7 @@ extern char etext[];
 int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte,
 			bool iswrite)
 {
-	pfn_t hpaddr;
+	kvm_pfn_t hpaddr;
 	u64 vpn;
 	u64 vsid;
 	struct kvmppc_sid_map *map;
diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c
index 774a253ca4e1..b9131aa1aedf 100644
--- a/arch/powerpc/kvm/book3s_64_mmu.c
+++ b/arch/powerpc/kvm/book3s_64_mmu.c
@@ -26,7 +26,7 @@
 #include <asm/tlbflush.h>
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 
 /* #define DEBUG_MMU */
 
@@ -377,15 +377,12 @@ no_seg_found:
 
 static void kvmppc_mmu_book3s_64_slbmte(struct kvm_vcpu *vcpu, u64 rs, u64 rb)
 {
-	struct kvmppc_vcpu_book3s *vcpu_book3s;
 	u64 esid, esid_1t;
 	int slb_nr;
 	struct kvmppc_slb *slbe;
 
 	dprintk("KVM MMU: slbmte(0x%llx, 0x%llx)\n", rs, rb);
 
-	vcpu_book3s = to_book3s(vcpu);
-
 	esid = GET_ESID(rb);
 	esid_1t = GET_ESID_1T(rb);
 	slb_nr = rb & 0xfff;
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index 79ad35abd196..114edace6cdd 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -23,7 +23,7 @@
 
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 #include <asm/machdep.h>
 #include <asm/mmu_context.h>
 #include <asm/hw_irq.h>
@@ -83,7 +83,7 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte,
 			bool iswrite)
 {
 	unsigned long vpn;
-	pfn_t hpaddr;
+	kvm_pfn_t hpaddr;
 	ulong hash, hpteg;
 	u64 vsid;
 	int ret;
diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c
index fb37290a57b4..c7b78d8336b2 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_hv.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c
@@ -32,7 +32,7 @@
 #include <asm/tlbflush.h>
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 #include <asm/hvcall.h>
 #include <asm/synch.h>
 #include <asm/ppc-opcode.h>
diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 54cf9bc94dad..18cf6d1f8174 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -14,6 +14,7 @@
  *
  * Copyright 2010 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
  * Copyright 2011 David Gibson, IBM Corporation <dwg@au1.ibm.com>
+ * Copyright 2016 Alexey Kardashevskiy, IBM Corporation <aik@au1.ibm.com>
  */
 
 #include <linux/types.h>
@@ -30,34 +31,75 @@
 #include <asm/tlbflush.h>
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 #include <asm/hvcall.h>
 #include <asm/synch.h>
 #include <asm/ppc-opcode.h>
 #include <asm/kvm_host.h>
 #include <asm/udbg.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
 
-#define TCES_PER_PAGE	(PAGE_SIZE / sizeof(u64))
+static unsigned long kvmppc_tce_pages(unsigned long iommu_pages)
+{
+	return ALIGN(iommu_pages * sizeof(u64), PAGE_SIZE) / PAGE_SIZE;
+}
 
-static long kvmppc_stt_npages(unsigned long window_size)
+static unsigned long kvmppc_stt_pages(unsigned long tce_pages)
 {
-	return ALIGN((window_size >> SPAPR_TCE_SHIFT)
-		     * sizeof(u64), PAGE_SIZE) / PAGE_SIZE;
+	unsigned long stt_bytes = sizeof(struct kvmppc_spapr_tce_table) +
+			(tce_pages * sizeof(struct page *));
+
+	return tce_pages + ALIGN(stt_bytes, PAGE_SIZE) / PAGE_SIZE;
 }
 
-static void release_spapr_tce_table(struct kvmppc_spapr_tce_table *stt)
+static long kvmppc_account_memlimit(unsigned long stt_pages, bool inc)
 {
-	struct kvm *kvm = stt->kvm;
-	int i;
+	long ret = 0;
 
-	mutex_lock(&kvm->lock);
-	list_del(&stt->list);
-	for (i = 0; i < kvmppc_stt_npages(stt->window_size); i++)
+	if (!current || !current->mm)
+		return ret; /* process exited */
+
+	down_write(&current->mm->mmap_sem);
+
+	if (inc) {
+		unsigned long locked, lock_limit;
+
+		locked = current->mm->locked_vm + stt_pages;
+		lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
+		if (locked > lock_limit && !capable(CAP_IPC_LOCK))
+			ret = -ENOMEM;
+		else
+			current->mm->locked_vm += stt_pages;
+	} else {
+		if (WARN_ON_ONCE(stt_pages > current->mm->locked_vm))
+			stt_pages = current->mm->locked_vm;
+
+		current->mm->locked_vm -= stt_pages;
+	}
+
+	pr_debug("[%d] RLIMIT_MEMLOCK KVM %c%ld %ld/%ld%s\n", current->pid,
+			inc ? '+' : '-',
+			stt_pages << PAGE_SHIFT,
+			current->mm->locked_vm << PAGE_SHIFT,
+			rlimit(RLIMIT_MEMLOCK),
+			ret ? " - exceeded" : "");
+
+	up_write(&current->mm->mmap_sem);
+
+	return ret;
+}
+
+static void release_spapr_tce_table(struct rcu_head *head)
+{
+	struct kvmppc_spapr_tce_table *stt = container_of(head,
+			struct kvmppc_spapr_tce_table, rcu);
+	unsigned long i, npages = kvmppc_tce_pages(stt->size);
+
+	for (i = 0; i < npages; i++)
 		__free_page(stt->pages[i]);
-	kfree(stt);
-	mutex_unlock(&kvm->lock);
 
-	kvm_put_kvm(kvm);
+	kfree(stt);
 }
 
 static int kvm_spapr_tce_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
@@ -65,7 +107,7 @@ static int kvm_spapr_tce_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	struct kvmppc_spapr_tce_table *stt = vma->vm_file->private_data;
 	struct page *page;
 
-	if (vmf->pgoff >= kvmppc_stt_npages(stt->window_size))
+	if (vmf->pgoff >= kvmppc_tce_pages(stt->size))
 		return VM_FAULT_SIGBUS;
 
 	page = stt->pages[vmf->pgoff];
@@ -88,7 +130,14 @@ static int kvm_spapr_tce_release(struct inode *inode, struct file *filp)
 {
 	struct kvmppc_spapr_tce_table *stt = filp->private_data;
 
-	release_spapr_tce_table(stt);
+	list_del_rcu(&stt->list);
+
+	kvm_put_kvm(stt->kvm);
+
+	kvmppc_account_memlimit(
+		kvmppc_stt_pages(kvmppc_tce_pages(stt->size)), false);
+	call_rcu(&stt->rcu, release_spapr_tce_table);
+
 	return 0;
 }
 
@@ -98,20 +147,29 @@ static const struct file_operations kvm_spapr_tce_fops = {
 };
 
 long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
-				   struct kvm_create_spapr_tce *args)
+				   struct kvm_create_spapr_tce_64 *args)
 {
 	struct kvmppc_spapr_tce_table *stt = NULL;
-	long npages;
+	unsigned long npages, size;
 	int ret = -ENOMEM;
 	int i;
 
+	if (!args->size)
+		return -EINVAL;
+
 	/* Check this LIOBN hasn't been previously allocated */
 	list_for_each_entry(stt, &kvm->arch.spapr_tce_tables, list) {
 		if (stt->liobn == args->liobn)
 			return -EBUSY;
 	}
 
-	npages = kvmppc_stt_npages(args->window_size);
+	size = args->size;
+	npages = kvmppc_tce_pages(size);
+	ret = kvmppc_account_memlimit(kvmppc_stt_pages(npages), true);
+	if (ret) {
+		stt = NULL;
+		goto fail;
+	}
 
 	stt = kzalloc(sizeof(*stt) + npages * sizeof(struct page *),
 		      GFP_KERNEL);
@@ -119,7 +177,9 @@ long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
 		goto fail;
 
 	stt->liobn = args->liobn;
-	stt->window_size = args->window_size;
+	stt->page_shift = args->page_shift;
+	stt->offset = args->offset;
+	stt->size = size;
 	stt->kvm = kvm;
 
 	for (i = 0; i < npages; i++) {
@@ -131,7 +191,7 @@ long kvm_vm_ioctl_create_spapr_tce(struct kvm *kvm,
 	kvm_get_kvm(kvm);
 
 	mutex_lock(&kvm->lock);
-	list_add(&stt->list, &kvm->arch.spapr_tce_tables);
+	list_add_rcu(&stt->list, &kvm->arch.spapr_tce_tables);
 
 	mutex_unlock(&kvm->lock);
 
@@ -148,3 +208,111 @@ fail:
 	}
 	return ret;
 }
+
+long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
+		      unsigned long ioba, unsigned long tce)
+{
+	struct kvmppc_spapr_tce_table *stt = kvmppc_find_table(vcpu, liobn);
+	long ret;
+
+	/* udbg_printf("H_PUT_TCE(): liobn=0x%lx ioba=0x%lx, tce=0x%lx\n", */
+	/* 	    liobn, ioba, tce); */
+
+	if (!stt)
+		return H_TOO_HARD;
+
+	ret = kvmppc_ioba_validate(stt, ioba, 1);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	ret = kvmppc_tce_validate(stt, tce);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	kvmppc_tce_put(stt, ioba >> stt->page_shift, tce);
+
+	return H_SUCCESS;
+}
+EXPORT_SYMBOL_GPL(kvmppc_h_put_tce);
+
+long kvmppc_h_put_tce_indirect(struct kvm_vcpu *vcpu,
+		unsigned long liobn, unsigned long ioba,
+		unsigned long tce_list, unsigned long npages)
+{
+	struct kvmppc_spapr_tce_table *stt;
+	long i, ret = H_SUCCESS, idx;
+	unsigned long entry, ua = 0;
+	u64 __user *tces, tce;
+
+	stt = kvmppc_find_table(vcpu, liobn);
+	if (!stt)
+		return H_TOO_HARD;
+
+	entry = ioba >> stt->page_shift;
+	/*
+	 * SPAPR spec says that the maximum size of the list is 512 TCEs
+	 * so the whole table fits in 4K page
+	 */
+	if (npages > 512)
+		return H_PARAMETER;
+
+	if (tce_list & (SZ_4K - 1))
+		return H_PARAMETER;
+
+	ret = kvmppc_ioba_validate(stt, ioba, npages);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	idx = srcu_read_lock(&vcpu->kvm->srcu);
+	if (kvmppc_gpa_to_ua(vcpu->kvm, tce_list, &ua, NULL)) {
+		ret = H_TOO_HARD;
+		goto unlock_exit;
+	}
+	tces = (u64 __user *) ua;
+
+	for (i = 0; i < npages; ++i) {
+		if (get_user(tce, tces + i)) {
+			ret = H_TOO_HARD;
+			goto unlock_exit;
+		}
+		tce = be64_to_cpu(tce);
+
+		ret = kvmppc_tce_validate(stt, tce);
+		if (ret != H_SUCCESS)
+			goto unlock_exit;
+
+		kvmppc_tce_put(stt, entry + i, tce);
+	}
+
+unlock_exit:
+	srcu_read_unlock(&vcpu->kvm->srcu, idx);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(kvmppc_h_put_tce_indirect);
+
+long kvmppc_h_stuff_tce(struct kvm_vcpu *vcpu,
+		unsigned long liobn, unsigned long ioba,
+		unsigned long tce_value, unsigned long npages)
+{
+	struct kvmppc_spapr_tce_table *stt;
+	long i, ret;
+
+	stt = kvmppc_find_table(vcpu, liobn);
+	if (!stt)
+		return H_TOO_HARD;
+
+	ret = kvmppc_ioba_validate(stt, ioba, npages);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	/* Check permission bits only to allow userspace poison TCE for debug */
+	if (tce_value & (TCE_PCI_WRITE | TCE_PCI_READ))
+		return H_PARAMETER;
+
+	for (i = 0; i < npages; ++i, ioba += (1ULL << stt->page_shift))
+		kvmppc_tce_put(stt, ioba >> stt->page_shift, tce_value);
+
+	return H_SUCCESS;
+}
+EXPORT_SYMBOL_GPL(kvmppc_h_stuff_tce);
diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c
index 89e96b3e0039..d461c440889a 100644
--- a/arch/powerpc/kvm/book3s_64_vio_hv.c
+++ b/arch/powerpc/kvm/book3s_64_vio_hv.c
@@ -14,6 +14,7 @@
  *
  * Copyright 2010 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
  * Copyright 2011 David Gibson, IBM Corporation <dwg@au1.ibm.com>
+ * Copyright 2016 Alexey Kardashevskiy, IBM Corporation <aik@au1.ibm.com>
  */
 
 #include <linux/types.h>
@@ -29,77 +30,320 @@
 #include <asm/tlbflush.h>
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
+#include <asm/mmu_context.h>
 #include <asm/hvcall.h>
 #include <asm/synch.h>
 #include <asm/ppc-opcode.h>
 #include <asm/kvm_host.h>
 #include <asm/udbg.h>
+#include <asm/iommu.h>
+#include <asm/tce.h>
+#include <asm/iommu.h>
 
 #define TCES_PER_PAGE	(PAGE_SIZE / sizeof(u64))
 
-/* WARNING: This will be called in real-mode on HV KVM and virtual
+/*
+ * Finds a TCE table descriptor by LIOBN.
+ *
+ * WARNING: This will be called in real or virtual mode on HV KVM and virtual
  *          mode on PR KVM
  */
-long kvmppc_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
-		      unsigned long ioba, unsigned long tce)
+struct kvmppc_spapr_tce_table *kvmppc_find_table(struct kvm_vcpu *vcpu,
+		unsigned long liobn)
 {
 	struct kvm *kvm = vcpu->kvm;
 	struct kvmppc_spapr_tce_table *stt;
 
+	list_for_each_entry_lockless(stt, &kvm->arch.spapr_tce_tables, list)
+		if (stt->liobn == liobn)
+			return stt;
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(kvmppc_find_table);
+
+/*
+ * Validates IO address.
+ *
+ * WARNING: This will be called in real-mode on HV KVM and virtual
+ *          mode on PR KVM
+ */
+long kvmppc_ioba_validate(struct kvmppc_spapr_tce_table *stt,
+		unsigned long ioba, unsigned long npages)
+{
+	unsigned long mask = (1ULL << stt->page_shift) - 1;
+	unsigned long idx = ioba >> stt->page_shift;
+
+	if ((ioba & mask) || (idx < stt->offset) ||
+			(idx - stt->offset + npages > stt->size) ||
+			(idx + npages < idx))
+		return H_PARAMETER;
+
+	return H_SUCCESS;
+}
+EXPORT_SYMBOL_GPL(kvmppc_ioba_validate);
+
+/*
+ * Validates TCE address.
+ * At the moment flags and page mask are validated.
+ * As the host kernel does not access those addresses (just puts them
+ * to the table and user space is supposed to process them), we can skip
+ * checking other things (such as TCE is a guest RAM address or the page
+ * was actually allocated).
+ *
+ * WARNING: This will be called in real-mode on HV KVM and virtual
+ *          mode on PR KVM
+ */
+long kvmppc_tce_validate(struct kvmppc_spapr_tce_table *stt, unsigned long tce)
+{
+	unsigned long page_mask = ~((1ULL << stt->page_shift) - 1);
+	unsigned long mask = ~(page_mask | TCE_PCI_WRITE | TCE_PCI_READ);
+
+	if (tce & mask)
+		return H_PARAMETER;
+
+	return H_SUCCESS;
+}
+EXPORT_SYMBOL_GPL(kvmppc_tce_validate);
+
+/* Note on the use of page_address() in real mode,
+ *
+ * It is safe to use page_address() in real mode on ppc64 because
+ * page_address() is always defined as lowmem_page_address()
+ * which returns __va(PFN_PHYS(page_to_pfn(page))) which is arithmetic
+ * operation and does not access page struct.
+ *
+ * Theoretically page_address() could be defined different
+ * but either WANT_PAGE_VIRTUAL or HASHED_PAGE_VIRTUAL
+ * would have to be enabled.
+ * WANT_PAGE_VIRTUAL is never enabled on ppc32/ppc64,
+ * HASHED_PAGE_VIRTUAL could be enabled for ppc32 only and only
+ * if CONFIG_HIGHMEM is defined. As CONFIG_SPARSEMEM_VMEMMAP
+ * is not expected to be enabled on ppc32, page_address()
+ * is safe for ppc32 as well.
+ *
+ * WARNING: This will be called in real-mode on HV KVM and virtual
+ *          mode on PR KVM
+ */
+static u64 *kvmppc_page_address(struct page *page)
+{
+#if defined(HASHED_PAGE_VIRTUAL) || defined(WANT_PAGE_VIRTUAL)
+#error TODO: fix to avoid page_address() here
+#endif
+	return (u64 *) page_address(page);
+}
+
+/*
+ * Handles TCE requests for emulated devices.
+ * Puts guest TCE values to the table and expects user space to convert them.
+ * Called in both real and virtual modes.
+ * Cannot fail so kvmppc_tce_validate must be called before it.
+ *
+ * WARNING: This will be called in real-mode on HV KVM and virtual
+ *          mode on PR KVM
+ */
+void kvmppc_tce_put(struct kvmppc_spapr_tce_table *stt,
+		unsigned long idx, unsigned long tce)
+{
+	struct page *page;
+	u64 *tbl;
+
+	idx -= stt->offset;
+	page = stt->pages[idx / TCES_PER_PAGE];
+	tbl = kvmppc_page_address(page);
+
+	tbl[idx % TCES_PER_PAGE] = tce;
+}
+EXPORT_SYMBOL_GPL(kvmppc_tce_put);
+
+long kvmppc_gpa_to_ua(struct kvm *kvm, unsigned long gpa,
+		unsigned long *ua, unsigned long **prmap)
+{
+	unsigned long gfn = gpa >> PAGE_SHIFT;
+	struct kvm_memory_slot *memslot;
+
+	memslot = search_memslots(kvm_memslots(kvm), gfn);
+	if (!memslot)
+		return -EINVAL;
+
+	*ua = __gfn_to_hva_memslot(memslot, gfn) |
+		(gpa & ~(PAGE_MASK | TCE_PCI_READ | TCE_PCI_WRITE));
+
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+	if (prmap)
+		*prmap = &memslot->arch.rmap[gfn - memslot->base_gfn];
+#endif
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(kvmppc_gpa_to_ua);
+
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+long kvmppc_rm_h_put_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
+		unsigned long ioba, unsigned long tce)
+{
+	struct kvmppc_spapr_tce_table *stt = kvmppc_find_table(vcpu, liobn);
+	long ret;
+
 	/* udbg_printf("H_PUT_TCE(): liobn=0x%lx ioba=0x%lx, tce=0x%lx\n", */
 	/* 	    liobn, ioba, tce); */
 
-	list_for_each_entry(stt, &kvm->arch.spapr_tce_tables, list) {
-		if (stt->liobn == liobn) {
-			unsigned long idx = ioba >> SPAPR_TCE_SHIFT;
-			struct page *page;
-			u64 *tbl;
-
-			/* udbg_printf("H_PUT_TCE: liobn 0x%lx => stt=%p  window_size=0x%x\n", */
-			/* 	    liobn, stt, stt->window_size); */
-			if (ioba >= stt->window_size)
-				return H_PARAMETER;
-
-			page = stt->pages[idx / TCES_PER_PAGE];
-			tbl = (u64 *)page_address(page);
-
-			/* FIXME: Need to validate the TCE itself */
-			/* udbg_printf("tce @ %p\n", &tbl[idx % TCES_PER_PAGE]); */
-			tbl[idx % TCES_PER_PAGE] = tce;
-			return H_SUCCESS;
-		}
+	if (!stt)
+		return H_TOO_HARD;
+
+	ret = kvmppc_ioba_validate(stt, ioba, 1);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	ret = kvmppc_tce_validate(stt, tce);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	kvmppc_tce_put(stt, ioba >> stt->page_shift, tce);
+
+	return H_SUCCESS;
+}
+
+static long kvmppc_rm_ua_to_hpa(struct kvm_vcpu *vcpu,
+		unsigned long ua, unsigned long *phpa)
+{
+	pte_t *ptep, pte;
+	unsigned shift = 0;
+
+	ptep = __find_linux_pte_or_hugepte(vcpu->arch.pgdir, ua, NULL, &shift);
+	if (!ptep || !pte_present(*ptep))
+		return -ENXIO;
+	pte = *ptep;
+
+	if (!shift)
+		shift = PAGE_SHIFT;
+
+	/* Avoid handling anything potentially complicated in realmode */
+	if (shift > PAGE_SHIFT)
+		return -EAGAIN;
+
+	if (!pte_young(pte))
+		return -EAGAIN;
+
+	*phpa = (pte_pfn(pte) << PAGE_SHIFT) | (ua & ((1ULL << shift) - 1)) |
+			(ua & ~PAGE_MASK);
+
+	return 0;
+}
+
+long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu,
+		unsigned long liobn, unsigned long ioba,
+		unsigned long tce_list,	unsigned long npages)
+{
+	struct kvmppc_spapr_tce_table *stt;
+	long i, ret = H_SUCCESS;
+	unsigned long tces, entry, ua = 0;
+	unsigned long *rmap = NULL;
+
+	stt = kvmppc_find_table(vcpu, liobn);
+	if (!stt)
+		return H_TOO_HARD;
+
+	entry = ioba >> stt->page_shift;
+	/*
+	 * The spec says that the maximum size of the list is 512 TCEs
+	 * so the whole table addressed resides in 4K page
+	 */
+	if (npages > 512)
+		return H_PARAMETER;
+
+	if (tce_list & (SZ_4K - 1))
+		return H_PARAMETER;
+
+	ret = kvmppc_ioba_validate(stt, ioba, npages);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	if (kvmppc_gpa_to_ua(vcpu->kvm, tce_list, &ua, &rmap))
+		return H_TOO_HARD;
+
+	rmap = (void *) vmalloc_to_phys(rmap);
+
+	/*
+	 * Synchronize with the MMU notifier callbacks in
+	 * book3s_64_mmu_hv.c (kvm_unmap_hva_hv etc.).
+	 * While we have the rmap lock, code running on other CPUs
+	 * cannot finish unmapping the host real page that backs
+	 * this guest real page, so we are OK to access the host
+	 * real page.
+	 */
+	lock_rmap(rmap);
+	if (kvmppc_rm_ua_to_hpa(vcpu, ua, &tces)) {
+		ret = H_TOO_HARD;
+		goto unlock_exit;
 	}
 
-	/* Didn't find the liobn, punt it to userspace */
-	return H_TOO_HARD;
+	for (i = 0; i < npages; ++i) {
+		unsigned long tce = be64_to_cpu(((u64 *)tces)[i]);
+
+		ret = kvmppc_tce_validate(stt, tce);
+		if (ret != H_SUCCESS)
+			goto unlock_exit;
+
+		kvmppc_tce_put(stt, entry + i, tce);
+	}
+
+unlock_exit:
+	unlock_rmap(rmap);
+
+	return ret;
+}
+
+long kvmppc_rm_h_stuff_tce(struct kvm_vcpu *vcpu,
+		unsigned long liobn, unsigned long ioba,
+		unsigned long tce_value, unsigned long npages)
+{
+	struct kvmppc_spapr_tce_table *stt;
+	long i, ret;
+
+	stt = kvmppc_find_table(vcpu, liobn);
+	if (!stt)
+		return H_TOO_HARD;
+
+	ret = kvmppc_ioba_validate(stt, ioba, npages);
+	if (ret != H_SUCCESS)
+		return ret;
+
+	/* Check permission bits only to allow userspace poison TCE for debug */
+	if (tce_value & (TCE_PCI_WRITE | TCE_PCI_READ))
+		return H_PARAMETER;
+
+	for (i = 0; i < npages; ++i, ioba += (1ULL << stt->page_shift))
+		kvmppc_tce_put(stt, ioba >> stt->page_shift, tce_value);
+
+	return H_SUCCESS;
 }
-EXPORT_SYMBOL_GPL(kvmppc_h_put_tce);
 
 long kvmppc_h_get_tce(struct kvm_vcpu *vcpu, unsigned long liobn,
 		      unsigned long ioba)
 {
-	struct kvm *kvm = vcpu->kvm;
-	struct kvmppc_spapr_tce_table *stt;
+	struct kvmppc_spapr_tce_table *stt = kvmppc_find_table(vcpu, liobn);
+	long ret;
+	unsigned long idx;
+	struct page *page;
+	u64 *tbl;
 
-	list_for_each_entry(stt, &kvm->arch.spapr_tce_tables, list) {
-		if (stt->liobn == liobn) {
-			unsigned long idx = ioba >> SPAPR_TCE_SHIFT;
-			struct page *page;
-			u64 *tbl;
+	if (!stt)
+		return H_TOO_HARD;
 
-			if (ioba >= stt->window_size)
-				return H_PARAMETER;
+	ret = kvmppc_ioba_validate(stt, ioba, 1);
+	if (ret != H_SUCCESS)
+		return ret;
 
-			page = stt->pages[idx / TCES_PER_PAGE];
-			tbl = (u64 *)page_address(page);
+	idx = (ioba >> stt->page_shift) - stt->offset;
+	page = stt->pages[idx / TCES_PER_PAGE];
+	tbl = (u64 *)page_address(page);
 
-			vcpu->arch.gpr[4] = tbl[idx % TCES_PER_PAGE];
-			return H_SUCCESS;
-		}
-	}
+	vcpu->arch.gpr[4] = tbl[idx % TCES_PER_PAGE];
 
-	/* Didn't find the liobn, punt it to userspace */
-	return H_TOO_HARD;
+	return H_SUCCESS;
 }
 EXPORT_SYMBOL_GPL(kvmppc_h_get_tce);
+
+#endif /* KVM_BOOK3S_HV_POSSIBLE */
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 9c26c5a96ea2..84fb4fcfaa41 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -81,6 +81,17 @@ static int target_smt_mode;
 module_param(target_smt_mode, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(target_smt_mode, "Target threads per core (0 = max)");
 
+#ifdef CONFIG_KVM_XICS
+static struct kernel_param_ops module_param_ops = {
+	.set = param_set_int,
+	.get = param_get_int,
+};
+
+module_param_cb(h_ipi_redirect, &module_param_ops, &h_ipi_redirect,
+							S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(h_ipi_redirect, "Redirect H_IPI wakeup to a free host core");
+#endif
+
 static void kvmppc_end_cede(struct kvm_vcpu *vcpu);
 static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu);
 
@@ -114,11 +125,11 @@ static bool kvmppc_ipi_thread(int cpu)
 static void kvmppc_fast_vcpu_kick_hv(struct kvm_vcpu *vcpu)
 {
 	int cpu;
-	wait_queue_head_t *wqp;
+	struct swait_queue_head *wqp;
 
 	wqp = kvm_arch_vcpu_wq(vcpu);
-	if (waitqueue_active(wqp)) {
-		wake_up_interruptible(wqp);
+	if (swait_active(wqp)) {
+		swake_up(wqp);
 		++vcpu->stat.halt_wakeup;
 	}
 
@@ -224,6 +235,12 @@ static void kvmppc_core_vcpu_put_hv(struct kvm_vcpu *vcpu)
 
 static void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr)
 {
+	/*
+	 * Check for illegal transactional state bit combination
+	 * and if we find it, force the TS field to a safe state.
+	 */
+	if ((msr & MSR_TS_MASK) == MSR_TS_MASK)
+		msr &= ~MSR_TS_MASK;
 	vcpu->arch.shregs.msr = msr;
 	kvmppc_end_cede(vcpu);
 }
@@ -308,16 +325,10 @@ static void kvmppc_dump_regs(struct kvm_vcpu *vcpu)
 
 static struct kvm_vcpu *kvmppc_find_vcpu(struct kvm *kvm, int id)
 {
-	int r;
-	struct kvm_vcpu *v, *ret = NULL;
+	struct kvm_vcpu *ret;
 
 	mutex_lock(&kvm->lock);
-	kvm_for_each_vcpu(r, v, kvm) {
-		if (v->vcpu_id == id) {
-			ret = v;
-			break;
-		}
-	}
+	ret = kvm_get_vcpu_by_id(kvm, id);
 	mutex_unlock(&kvm->lock);
 	return ret;
 }
@@ -701,8 +712,8 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
 		tvcpu->arch.prodded = 1;
 		smp_mb();
 		if (vcpu->arch.ceded) {
-			if (waitqueue_active(&vcpu->wq)) {
-				wake_up_interruptible(&vcpu->wq);
+			if (swait_active(&vcpu->wq)) {
+				swake_up(&vcpu->wq);
 				vcpu->stat.halt_wakeup++;
 			}
 		}
@@ -768,7 +779,31 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
 		if (kvmppc_xics_enabled(vcpu)) {
 			ret = kvmppc_xics_hcall(vcpu, req);
 			break;
-		} /* fallthrough */
+		}
+		return RESUME_HOST;
+	case H_PUT_TCE:
+		ret = kvmppc_h_put_tce(vcpu, kvmppc_get_gpr(vcpu, 4),
+						kvmppc_get_gpr(vcpu, 5),
+						kvmppc_get_gpr(vcpu, 6));
+		if (ret == H_TOO_HARD)
+			return RESUME_HOST;
+		break;
+	case H_PUT_TCE_INDIRECT:
+		ret = kvmppc_h_put_tce_indirect(vcpu, kvmppc_get_gpr(vcpu, 4),
+						kvmppc_get_gpr(vcpu, 5),
+						kvmppc_get_gpr(vcpu, 6),
+						kvmppc_get_gpr(vcpu, 7));
+		if (ret == H_TOO_HARD)
+			return RESUME_HOST;
+		break;
+	case H_STUFF_TCE:
+		ret = kvmppc_h_stuff_tce(vcpu, kvmppc_get_gpr(vcpu, 4),
+						kvmppc_get_gpr(vcpu, 5),
+						kvmppc_get_gpr(vcpu, 6),
+						kvmppc_get_gpr(vcpu, 7));
+		if (ret == H_TOO_HARD)
+			return RESUME_HOST;
+		break;
 	default:
 		return RESUME_HOST;
 	}
@@ -833,6 +868,24 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 	vcpu->stat.sum_exits++;
 
+	/*
+	 * This can happen if an interrupt occurs in the last stages
+	 * of guest entry or the first stages of guest exit (i.e. after
+	 * setting paca->kvm_hstate.in_guest to KVM_GUEST_MODE_GUEST_HV
+	 * and before setting it to KVM_GUEST_MODE_HOST_HV).
+	 * That can happen due to a bug, or due to a machine check
+	 * occurring at just the wrong time.
+	 */
+	if (vcpu->arch.shregs.msr & MSR_HV) {
+		printk(KERN_EMERG "KVM trap in HV mode!\n");
+		printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n",
+			vcpu->arch.trap, kvmppc_get_pc(vcpu),
+			vcpu->arch.shregs.msr);
+		kvmppc_dump_regs(vcpu);
+		run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		run->hw.hardware_exit_reason = vcpu->arch.trap;
+		return RESUME_HOST;
+	}
 	run->exit_reason = KVM_EXIT_UNKNOWN;
 	run->ready_for_interrupt_injection = 1;
 	switch (vcpu->arch.trap) {
@@ -1441,7 +1494,7 @@ static struct kvmppc_vcore *kvmppc_vcore_create(struct kvm *kvm, int core)
 	INIT_LIST_HEAD(&vcore->runnable_threads);
 	spin_lock_init(&vcore->lock);
 	spin_lock_init(&vcore->stoltb_lock);
-	init_waitqueue_head(&vcore->wq);
+	init_swait_queue_head(&vcore->wq);
 	vcore->preempt_tb = TB_NIL;
 	vcore->lpcr = kvm->arch.lpcr;
 	vcore->first_vcpuid = core * threads_per_subcore;
@@ -2019,7 +2072,7 @@ static bool can_split_piggybacked_subcores(struct core_info *cip)
 			return false;
 		n_subcores += (cip->subcore_threads[sub] - 1) >> 1;
 	}
-	if (n_subcores > 3 || large_sub < 0)
+	if (large_sub < 0 || !subcore_config_ok(n_subcores + 1, 2))
 		return false;
 
 	/*
@@ -2261,6 +2314,46 @@ static void post_guest_process(struct kvmppc_vcore *vc, bool is_master)
 }
 
 /*
+ * Clear core from the list of active host cores as we are about to
+ * enter the guest. Only do this if it is the primary thread of the
+ * core (not if a subcore) that is entering the guest.
+ */
+static inline void kvmppc_clear_host_core(int cpu)
+{
+	int core;
+
+	if (!kvmppc_host_rm_ops_hv || cpu_thread_in_core(cpu))
+		return;
+	/*
+	 * Memory barrier can be omitted here as we will do a smp_wmb()
+	 * later in kvmppc_start_thread and we need ensure that state is
+	 * visible to other CPUs only after we enter guest.
+	 */
+	core = cpu >> threads_shift;
+	kvmppc_host_rm_ops_hv->rm_core[core].rm_state.in_host = 0;
+}
+
+/*
+ * Advertise this core as an active host core since we exited the guest
+ * Only need to do this if it is the primary thread of the core that is
+ * exiting.
+ */
+static inline void kvmppc_set_host_core(int cpu)
+{
+	int core;
+
+	if (!kvmppc_host_rm_ops_hv || cpu_thread_in_core(cpu))
+		return;
+
+	/*
+	 * Memory barrier can be omitted here because we do a spin_unlock
+	 * immediately after this which provides the memory barrier.
+	 */
+	core = cpu >> threads_shift;
+	kvmppc_host_rm_ops_hv->rm_core[core].rm_state.in_host = 1;
+}
+
+/*
  * Run a set of guest threads on a physical core.
  * Called with vc->lock held.
  */
@@ -2372,6 +2465,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 		}
 	}
 
+	kvmppc_clear_host_core(pcpu);
+
 	/* Start all the threads */
 	active = 0;
 	for (sub = 0; sub < core_info.n_subcores; ++sub) {
@@ -2468,6 +2563,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
 			kvmppc_ipi_thread(pcpu + i);
 	}
 
+	kvmppc_set_host_core(pcpu);
+
 	spin_unlock(&vc->lock);
 
 	/* make sure updates to secondary vcpu structs are visible now */
@@ -2513,10 +2610,9 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 {
 	struct kvm_vcpu *vcpu;
 	int do_sleep = 1;
+	DECLARE_SWAITQUEUE(wait);
 
-	DEFINE_WAIT(wait);
-
-	prepare_to_wait(&vc->wq, &wait, TASK_INTERRUPTIBLE);
+	prepare_to_swait(&vc->wq, &wait, TASK_INTERRUPTIBLE);
 
 	/*
 	 * Check one last time for pending exceptions and ceded state after
@@ -2530,7 +2626,7 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 	}
 
 	if (!do_sleep) {
-		finish_wait(&vc->wq, &wait);
+		finish_swait(&vc->wq, &wait);
 		return;
 	}
 
@@ -2538,7 +2634,7 @@ static void kvmppc_vcore_blocked(struct kvmppc_vcore *vc)
 	trace_kvmppc_vcore_blocked(vc, 0);
 	spin_unlock(&vc->lock);
 	schedule();
-	finish_wait(&vc->wq, &wait);
+	finish_swait(&vc->wq, &wait);
 	spin_lock(&vc->lock);
 	vc->vcore_state = VCORE_INACTIVE;
 	trace_kvmppc_vcore_blocked(vc, 1);
@@ -2594,7 +2690,7 @@ static int kvmppc_run_vcpu(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 			kvmppc_start_thread(vcpu, vc);
 			trace_kvm_guest_enter(vcpu);
 		} else if (vc->vcore_state == VCORE_SLEEPING) {
-			wake_up(&vc->wq);
+			swake_up(&vc->wq);
 		}
 
 	}
@@ -2700,9 +2796,8 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			goto out;
 	}
 
-	flush_fp_to_thread(current);
-	flush_altivec_to_thread(current);
-	flush_vsx_to_thread(current);
+	flush_all_to_thread(current);
+
 	vcpu->arch.wqp = &vcpu->arch.vcore->wq;
 	vcpu->arch.pgdir = current->mm->pgd;
 	vcpu->arch.state = KVMPPC_VCPU_BUSY_IN_HOST;
@@ -2967,6 +3062,114 @@ static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu)
 	goto out_srcu;
 }
 
+#ifdef CONFIG_KVM_XICS
+static int kvmppc_cpu_notify(struct notifier_block *self, unsigned long action,
+			void *hcpu)
+{
+	unsigned long cpu = (long)hcpu;
+
+	switch (action) {
+	case CPU_UP_PREPARE:
+	case CPU_UP_PREPARE_FROZEN:
+		kvmppc_set_host_core(cpu);
+		break;
+
+#ifdef CONFIG_HOTPLUG_CPU
+	case CPU_DEAD:
+	case CPU_DEAD_FROZEN:
+	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
+		kvmppc_clear_host_core(cpu);
+		break;
+#endif
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block kvmppc_cpu_notifier = {
+	    .notifier_call = kvmppc_cpu_notify,
+};
+
+/*
+ * Allocate a per-core structure for managing state about which cores are
+ * running in the host versus the guest and for exchanging data between
+ * real mode KVM and CPU running in the host.
+ * This is only done for the first VM.
+ * The allocated structure stays even if all VMs have stopped.
+ * It is only freed when the kvm-hv module is unloaded.
+ * It's OK for this routine to fail, we just don't support host
+ * core operations like redirecting H_IPI wakeups.
+ */
+void kvmppc_alloc_host_rm_ops(void)
+{
+	struct kvmppc_host_rm_ops *ops;
+	unsigned long l_ops;
+	int cpu, core;
+	int size;
+
+	/* Not the first time here ? */
+	if (kvmppc_host_rm_ops_hv != NULL)
+		return;
+
+	ops = kzalloc(sizeof(struct kvmppc_host_rm_ops), GFP_KERNEL);
+	if (!ops)
+		return;
+
+	size = cpu_nr_cores() * sizeof(struct kvmppc_host_rm_core);
+	ops->rm_core = kzalloc(size, GFP_KERNEL);
+
+	if (!ops->rm_core) {
+		kfree(ops);
+		return;
+	}
+
+	get_online_cpus();
+
+	for (cpu = 0; cpu < nr_cpu_ids; cpu += threads_per_core) {
+		if (!cpu_online(cpu))
+			continue;
+
+		core = cpu >> threads_shift;
+		ops->rm_core[core].rm_state.in_host = 1;
+	}
+
+	ops->vcpu_kick = kvmppc_fast_vcpu_kick_hv;
+
+	/*
+	 * Make the contents of the kvmppc_host_rm_ops structure visible
+	 * to other CPUs before we assign it to the global variable.
+	 * Do an atomic assignment (no locks used here), but if someone
+	 * beats us to it, just free our copy and return.
+	 */
+	smp_wmb();
+	l_ops = (unsigned long) ops;
+
+	if (cmpxchg64((unsigned long *)&kvmppc_host_rm_ops_hv, 0, l_ops)) {
+		put_online_cpus();
+		kfree(ops->rm_core);
+		kfree(ops);
+		return;
+	}
+
+	register_cpu_notifier(&kvmppc_cpu_notifier);
+
+	put_online_cpus();
+}
+
+void kvmppc_free_host_rm_ops(void)
+{
+	if (kvmppc_host_rm_ops_hv) {
+		unregister_cpu_notifier(&kvmppc_cpu_notifier);
+		kfree(kvmppc_host_rm_ops_hv->rm_core);
+		kfree(kvmppc_host_rm_ops_hv);
+		kvmppc_host_rm_ops_hv = NULL;
+	}
+}
+#endif
+
 static int kvmppc_core_init_vm_hv(struct kvm *kvm)
 {
 	unsigned long lpcr, lpid;
@@ -2979,6 +3182,8 @@ static int kvmppc_core_init_vm_hv(struct kvm *kvm)
 		return -ENOMEM;
 	kvm->arch.lpid = lpid;
 
+	kvmppc_alloc_host_rm_ops();
+
 	/*
 	 * Since we don't flush the TLB when tearing down a VM,
 	 * and this lpid might have previously been used,
@@ -3212,6 +3417,7 @@ static int kvmppc_book3s_init_hv(void)
 
 static void kvmppc_book3s_exit_hv(void)
 {
+	kvmppc_free_host_rm_ops();
 	kvmppc_hv_ops = NULL;
 }
 
diff --git a/arch/powerpc/kvm/book3s_hv_builtin.c b/arch/powerpc/kvm/book3s_hv_builtin.c
index fd7006bf6b1a..5f0380db3eab 100644
--- a/arch/powerpc/kvm/book3s_hv_builtin.c
+++ b/arch/powerpc/kvm/book3s_hv_builtin.c
@@ -283,3 +283,6 @@ void kvmhv_commence_exit(int trap)
 			kvmhv_interrupt_vcore(vc, ee);
 	}
 }
+
+struct kvmppc_host_rm_ops *kvmppc_host_rm_ops_hv;
+EXPORT_SYMBOL_GPL(kvmppc_host_rm_ops_hv);
diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
index 91700518bbf3..4cb8db05f3e5 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -17,7 +17,7 @@
 #include <asm/tlbflush.h>
 #include <asm/kvm_ppc.h>
 #include <asm/kvm_book3s.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 #include <asm/hvcall.h>
 #include <asm/synch.h>
 #include <asm/ppc-opcode.h>
diff --git a/arch/powerpc/kvm/book3s_hv_rm_xics.c b/arch/powerpc/kvm/book3s_hv_rm_xics.c
index 24f58076d49e..980d8a6f7284 100644
--- a/arch/powerpc/kvm/book3s_hv_rm_xics.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_xics.c
@@ -17,12 +17,16 @@
 #include <asm/xics.h>
 #include <asm/debug.h>
 #include <asm/synch.h>
+#include <asm/cputhreads.h>
 #include <asm/ppc-opcode.h>
 
 #include "book3s_xics.h"
 
 #define DEBUG_PASSUP
 
+int h_ipi_redirect = 1;
+EXPORT_SYMBOL(h_ipi_redirect);
+
 static void icp_rm_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp,
 			    u32 new_irq);
 
@@ -50,11 +54,84 @@ static void ics_rm_check_resend(struct kvmppc_xics *xics,
 
 /* -- ICP routines -- */
 
+#ifdef CONFIG_SMP
+static inline void icp_send_hcore_msg(int hcore, struct kvm_vcpu *vcpu)
+{
+	int hcpu;
+
+	hcpu = hcore << threads_shift;
+	kvmppc_host_rm_ops_hv->rm_core[hcore].rm_data = vcpu;
+	smp_muxed_ipi_set_message(hcpu, PPC_MSG_RM_HOST_ACTION);
+	icp_native_cause_ipi_rm(hcpu);
+}
+#else
+static inline void icp_send_hcore_msg(int hcore, struct kvm_vcpu *vcpu) { }
+#endif
+
+/*
+ * We start the search from our current CPU Id in the core map
+ * and go in a circle until we get back to our ID looking for a
+ * core that is running in host context and that hasn't already
+ * been targeted for another rm_host_ops.
+ *
+ * In the future, could consider using a fairer algorithm (one
+ * that distributes the IPIs better)
+ *
+ * Returns -1, if no CPU could be found in the host
+ * Else, returns a CPU Id which has been reserved for use
+ */
+static inline int grab_next_hostcore(int start,
+		struct kvmppc_host_rm_core *rm_core, int max, int action)
+{
+	bool success;
+	int core;
+	union kvmppc_rm_state old, new;
+
+	for (core = start + 1; core < max; core++)  {
+		old = new = READ_ONCE(rm_core[core].rm_state);
+
+		if (!old.in_host || old.rm_action)
+			continue;
+
+		/* Try to grab this host core if not taken already. */
+		new.rm_action = action;
+
+		success = cmpxchg64(&rm_core[core].rm_state.raw,
+						old.raw, new.raw) == old.raw;
+		if (success) {
+			/*
+			 * Make sure that the store to the rm_action is made
+			 * visible before we return to caller (and the
+			 * subsequent store to rm_data) to synchronize with
+			 * the IPI handler.
+			 */
+			smp_wmb();
+			return core;
+		}
+	}
+
+	return -1;
+}
+
+static inline int find_available_hostcore(int action)
+{
+	int core;
+	int my_core = smp_processor_id() >> threads_shift;
+	struct kvmppc_host_rm_core *rm_core = kvmppc_host_rm_ops_hv->rm_core;
+
+	core = grab_next_hostcore(my_core, rm_core, cpu_nr_cores(), action);
+	if (core == -1)
+		core = grab_next_hostcore(core, rm_core, my_core, action);
+
+	return core;
+}
+
 static void icp_rm_set_vcpu_irq(struct kvm_vcpu *vcpu,
 				struct kvm_vcpu *this_vcpu)
 {
 	struct kvmppc_icp *this_icp = this_vcpu->arch.icp;
 	int cpu;
+	int hcore;
 
 	/* Mark the target VCPU as having an interrupt pending */
 	vcpu->stat.queue_intr++;
@@ -66,11 +143,22 @@ static void icp_rm_set_vcpu_irq(struct kvm_vcpu *vcpu,
 		return;
 	}
 
-	/* Check if the core is loaded, if not, too hard */
+	/*
+	 * Check if the core is loaded,
+	 * if not, find an available host core to post to wake the VCPU,
+	 * if we can't find one, set up state to eventually return too hard.
+	 */
 	cpu = vcpu->arch.thread_cpu;
 	if (cpu < 0 || cpu >= nr_cpu_ids) {
-		this_icp->rm_action |= XICS_RM_KICK_VCPU;
-		this_icp->rm_kick_target = vcpu;
+		hcore = -1;
+		if (kvmppc_host_rm_ops_hv && h_ipi_redirect)
+			hcore = find_available_hostcore(XICS_RM_KICK_VCPU);
+		if (hcore != -1) {
+			icp_send_hcore_msg(hcore, vcpu);
+		} else {
+			this_icp->rm_action |= XICS_RM_KICK_VCPU;
+			this_icp->rm_kick_target = vcpu;
+		}
 		return;
 	}
 
@@ -623,3 +711,40 @@ int kvmppc_rm_h_eoi(struct kvm_vcpu *vcpu, unsigned long xirr)
  bail:
 	return check_too_hard(xics, icp);
 }
+
+/*  --- Non-real mode XICS-related built-in routines ---  */
+
+/**
+ * Host Operations poked by RM KVM
+ */
+static void rm_host_ipi_action(int action, void *data)
+{
+	switch (action) {
+	case XICS_RM_KICK_VCPU:
+		kvmppc_host_rm_ops_hv->vcpu_kick(data);
+		break;
+	default:
+		WARN(1, "Unexpected rm_action=%d data=%p\n", action, data);
+		break;
+	}
+
+}
+
+void kvmppc_xics_ipi_action(void)
+{
+	int core;
+	unsigned int cpu = smp_processor_id();
+	struct kvmppc_host_rm_core *rm_corep;
+
+	core = cpu >> threads_shift;
+	rm_corep = &kvmppc_host_rm_ops_hv->rm_core[core];
+
+	if (rm_corep->rm_data) {
+		rm_host_ipi_action(rm_corep->rm_state.rm_action,
+							rm_corep->rm_data);
+		/* Order these stores against the real mode KVM */
+		rm_corep->rm_data = NULL;
+		smp_wmb();
+		rm_corep->rm_state.rm_action = 0;
+	}
+}
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index b1dab8d1d885..e571ad277398 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -27,7 +27,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/exception-64s.h>
 #include <asm/kvm_book3s_asm.h>
-#include <asm/mmu-hash64.h>
+#include <asm/book3s/64/mmu-hash.h>
 #include <asm/tm.h>
 
 #define VCPU_GPRS_TM(reg) (((reg) * ULONG_SIZE) + VCPU_GPR_TM)
@@ -1370,6 +1370,20 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 	std	r6, VCPU_ACOP(r9)
 	stw	r7, VCPU_GUEST_PID(r9)
 	std	r8, VCPU_WORT(r9)
+	/*
+	 * Restore various registers to 0, where non-zero values
+	 * set by the guest could disrupt the host.
+	 */
+	li	r0, 0
+	mtspr	SPRN_IAMR, r0
+	mtspr	SPRN_CIABR, r0
+	mtspr	SPRN_DAWRX, r0
+	mtspr	SPRN_TCSCR, r0
+	mtspr	SPRN_WORT, r0
+	/* Set MMCRS to 1<<31 to freeze and disable the SPMC counters */
+	li	r0, 1
+	sldi	r0, r0, 31
+	mtspr	SPRN_MMCRS, r0
 8:
 
 	/* Save and reset AMR and UAMOR before turning on the MMU */
@@ -1749,7 +1763,8 @@ kvmppc_hdsi:
 	beq	3f
 	clrrdi	r0, r4, 28
 	PPC_SLBFEE_DOT(R5, R0)		/* if so, look up SLB */
-	bne	1f			/* if no SLB entry found */
+	li	r0, BOOK3S_INTERRUPT_DATA_SEGMENT
+	bne	7f			/* if no SLB entry found */
 4:	std	r4, VCPU_FAULT_DAR(r9)
 	stw	r6, VCPU_FAULT_DSISR(r9)
 
@@ -1768,14 +1783,15 @@ kvmppc_hdsi:
 	cmpdi	r3, -2			/* MMIO emulation; need instr word */
 	beq	2f
 
-	/* Synthesize a DSI for the guest */
+	/* Synthesize a DSI (or DSegI) for the guest */
 	ld	r4, VCPU_FAULT_DAR(r9)
 	mr	r6, r3
-1:	mtspr	SPRN_DAR, r4
+1:	li	r0, BOOK3S_INTERRUPT_DATA_STORAGE
 	mtspr	SPRN_DSISR, r6
+7:	mtspr	SPRN_DAR, r4
 	mtspr	SPRN_SRR0, r10
 	mtspr	SPRN_SRR1, r11
-	li	r10, BOOK3S_INTERRUPT_DATA_STORAGE
+	mr	r10, r0
 	bl	kvmppc_msr_interrupt
 fast_interrupt_c_return:
 6:	ld	r7, VCPU_CTR(r9)
@@ -1823,7 +1839,8 @@ kvmppc_hisi:
 	beq	3f
 	clrrdi	r0, r10, 28
 	PPC_SLBFEE_DOT(R5, R0)		/* if so, look up SLB */
-	bne	1f			/* if no SLB entry found */
+	li	r0, BOOK3S_INTERRUPT_INST_SEGMENT
+	bne	7f			/* if no SLB entry found */
 4:
 	/* Search the hash table. */
 	mr	r3, r9			/* vcpu pointer */
@@ -1840,11 +1857,12 @@ kvmppc_hisi:
 	cmpdi	r3, -1			/* handle in kernel mode */
 	beq	guest_exit_cont
 
-	/* Synthesize an ISI for the guest */
+	/* Synthesize an ISI (or ISegI) for the guest */
 	mr	r11, r3
-1:	mtspr	SPRN_SRR0, r10
+1:	li	r0, BOOK3S_INTERRUPT_INST_STORAGE
+7:	mtspr	SPRN_SRR0, r10
 	mtspr	SPRN_SRR1, r11
-	li	r10, BOOK3S_INTERRUPT_INST_STORAGE
+	mr	r10, r0
 	bl	kvmppc_msr_interrupt
 	b	fast_interrupt_c_return
 
@@ -1924,7 +1942,7 @@ hcall_real_table:
 	.long	DOTSYM(kvmppc_h_clear_ref) - hcall_real_table
 	.long	DOTSYM(kvmppc_h_protect) - hcall_real_table
 	.long	DOTSYM(kvmppc_h_get_tce) - hcall_real_table
-	.long	DOTSYM(kvmppc_h_put_tce) - hcall_real_table
+	.long	DOTSYM(kvmppc_rm_h_put_tce) - hcall_real_table
 	.long	0		/* 0x24 - H_SET_SPRG0 */
 	.long	DOTSYM(kvmppc_h_set_dabr) - hcall_real_table
 	.long	0		/* 0x2c */
@@ -2002,8 +2020,8 @@ hcall_real_table:
 	.long	0		/* 0x12c */
 	.long	0		/* 0x130 */
 	.long	DOTSYM(kvmppc_h_set_xdabr) - hcall_real_table
-	.long	0		/* 0x138 */
-	.long	0		/* 0x13c */
+	.long	DOTSYM(kvmppc_rm_h_stuff_tce) - hcall_real_table
+	.long	DOTSYM(kvmppc_rm_h_put_tce_indirect) - hcall_real_table
 	.long	0		/* 0x140 */
 	.long	0		/* 0x144 */
 	.long	0		/* 0x148 */
@@ -2149,7 +2167,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 
 	/* Emulate H_SET_DABR/X on P8 for the sake of compat mode guests */
 2:	rlwimi	r5, r4, 5, DAWRX_DR | DAWRX_DW
-	rlwimi	r5, r4, 1, DAWRX_WT
+	rlwimi	r5, r4, 2, DAWRX_WT
 	clrrdi	r4, r4, 3
 	std	r4, VCPU_DAWR(r3)
 	std	r5, VCPU_DAWRX(r3)
@@ -2400,6 +2418,8 @@ machine_check_realmode:
 	 * guest as machine check causing guest to crash.
 	 */
 	ld	r11, VCPU_MSR(r9)
+	rldicl.	r0, r11, 64-MSR_HV_LG, 63 /* check if it happened in HV mode */
+	bne	mc_cont			/* if so, exit to host */
 	andi.	r10, r11, MSR_RI	/* check for unrecoverable exception */
 	beq	1f			/* Deliver a machine check to guest */
 	ld	r10, VCPU_PC(r9)
diff --git a/arch/powerpc/kvm/book3s_paired_singles.c b/arch/powerpc/kvm/book3s_paired_singles.c
index a759d9adb0b6..eab96cfe82fa 100644
--- a/arch/powerpc/kvm/book3s_paired_singles.c
+++ b/arch/powerpc/kvm/book3s_paired_singles.c
@@ -1265,6 +1265,7 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu)
 	if (rcomp)
 		kvmppc_set_cr(vcpu, cr);
 
+	disable_kernel_fp();
 	preempt_enable();
 
 	return emulated;
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 64891b081ad5..95bceca8f40e 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -512,7 +512,7 @@ static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
 	put_page(hpage);
 }
 
-static int kvmppc_visible_gpa(struct kvm_vcpu *vcpu, gpa_t gpa)
+static bool kvmppc_visible_gpa(struct kvm_vcpu *vcpu, gpa_t gpa)
 {
 	ulong mp_pa = vcpu->arch.magic_page_pa;
 
@@ -521,7 +521,7 @@ static int kvmppc_visible_gpa(struct kvm_vcpu *vcpu, gpa_t gpa)
 
 	gpa &= ~0xFFFULL;
 	if (unlikely(mp_pa) && unlikely((mp_pa & KVM_PAM) == (gpa & KVM_PAM))) {
-		return 1;
+		return true;
 	}
 
 	return kvm_is_visible_gfn(vcpu->kvm, gpa >> PAGE_SHIFT);
@@ -751,6 +751,7 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 		preempt_disable();
 		enable_kernel_fp();
 		load_fp_state(&vcpu->arch.fp);
+		disable_kernel_fp();
 		t->fp_save_area = &vcpu->arch.fp;
 		preempt_enable();
 	}
@@ -760,6 +761,7 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr,
 		preempt_disable();
 		enable_kernel_altivec();
 		load_vr_state(&vcpu->arch.vr);
+		disable_kernel_altivec();
 		t->vr_save_area = &vcpu->arch.vr;
 		preempt_enable();
 #endif
@@ -788,6 +790,7 @@ static void kvmppc_handle_lost_ext(struct kvm_vcpu *vcpu)
 		preempt_disable();
 		enable_kernel_fp();
 		load_fp_state(&vcpu->arch.fp);
+		disable_kernel_fp();
 		preempt_enable();
 	}
 #ifdef CONFIG_ALTIVEC
@@ -795,6 +798,7 @@ static void kvmppc_handle_lost_ext(struct kvm_vcpu *vcpu)
 		preempt_disable();
 		enable_kernel_altivec();
 		load_vr_state(&vcpu->arch.vr);
+		disable_kernel_altivec();
 		preempt_enable();
 	}
 #endif
@@ -1486,21 +1490,8 @@ static int kvmppc_vcpu_run_pr(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		goto out;
 	/* interrupts now hard-disabled */
 
-	/* Save FPU state in thread_struct */
-	if (current->thread.regs->msr & MSR_FP)
-		giveup_fpu(current);
-
-#ifdef CONFIG_ALTIVEC
-	/* Save Altivec state in thread_struct */
-	if (current->thread.regs->msr & MSR_VEC)
-		giveup_altivec(current);
-#endif
-
-#ifdef CONFIG_VSX
-	/* Save VSX state in thread_struct */
-	if (current->thread.regs->msr & MSR_VSX)
-		__giveup_vsx(current);
-#endif
+	/* Save FPU, Altivec and VSX state */
+	giveup_all(current);
 
 	/* Preload FPU if it's enabled */
 	if (kvmppc_get_msr(vcpu) & MSR_FP)
diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c
index f2c75a1e0536..02176fd52f84 100644
--- a/arch/powerpc/kvm/book3s_pr_papr.c
+++ b/arch/powerpc/kvm/book3s_pr_papr.c
@@ -280,6 +280,37 @@ static int kvmppc_h_pr_logical_ci_store(struct kvm_vcpu *vcpu)
 	return EMULATE_DONE;
 }
 
+static int kvmppc_h_pr_put_tce_indirect(struct kvm_vcpu *vcpu)
+{
+	unsigned long liobn = kvmppc_get_gpr(vcpu, 4);
+	unsigned long ioba = kvmppc_get_gpr(vcpu, 5);
+	unsigned long tce = kvmppc_get_gpr(vcpu, 6);
+	unsigned long npages = kvmppc_get_gpr(vcpu, 7);
+	long rc;
+
+	rc = kvmppc_h_put_tce_indirect(vcpu, liobn, ioba,
+			tce, npages);
+	if (rc == H_TOO_HARD)
+		return EMULATE_FAIL;
+	kvmppc_set_gpr(vcpu, 3, rc);
+	return EMULATE_DONE;
+}
+
+static int kvmppc_h_pr_stuff_tce(struct kvm_vcpu *vcpu)
+{
+	unsigned long liobn = kvmppc_get_gpr(vcpu, 4);
+	unsigned long ioba = kvmppc_get_gpr(vcpu, 5);
+	unsigned long tce_value = kvmppc_get_gpr(vcpu, 6);
+	unsigned long npages = kvmppc_get_gpr(vcpu, 7);
+	long rc;
+
+	rc = kvmppc_h_stuff_tce(vcpu, liobn, ioba, tce_value, npages);
+	if (rc == H_TOO_HARD)
+		return EMULATE_FAIL;
+	kvmppc_set_gpr(vcpu, 3, rc);
+	return EMULATE_DONE;
+}
+
 static int kvmppc_h_pr_xics_hcall(struct kvm_vcpu *vcpu, u32 cmd)
 {
 	long rc = kvmppc_xics_hcall(vcpu, cmd);
@@ -306,6 +337,10 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd)
 		return kvmppc_h_pr_bulk_remove(vcpu);
 	case H_PUT_TCE:
 		return kvmppc_h_pr_put_tce(vcpu);
+	case H_PUT_TCE_INDIRECT:
+		return kvmppc_h_pr_put_tce_indirect(vcpu);
+	case H_STUFF_TCE:
+		return kvmppc_h_pr_stuff_tce(vcpu);
 	case H_CEDE:
 		kvmppc_set_msr_fast(vcpu, kvmppc_get_msr(vcpu) | MSR_EE);
 		kvm_vcpu_block(vcpu);
diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c
index 905e94a1370f..46871d554057 100644
--- a/arch/powerpc/kvm/book3s_xics.c
+++ b/arch/powerpc/kvm/book3s_xics.c
@@ -432,7 +432,7 @@ static void icp_deliver_irq(struct kvmppc_xics *xics, struct kvmppc_icp *icp,
 	 * the whole masked_pending business which is about not
 	 * losing interrupts that occur while masked.
 	 *
-	 * I don't differenciate normal deliveries and resends, this
+	 * I don't differentiate normal deliveries and resends, this
 	 * implementation will differ from PAPR and not lose such
 	 * interrupts.
 	 */
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index fd5875179e5c..4d66f44a1657 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -98,6 +98,7 @@ void kvmppc_vcpu_disable_spe(struct kvm_vcpu *vcpu)
 	preempt_disable();
 	enable_kernel_spe();
 	kvmppc_save_guest_spe(vcpu);
+	disable_kernel_spe();
 	vcpu->arch.shadow_msr &= ~MSR_SPE;
 	preempt_enable();
 }
@@ -107,6 +108,7 @@ static void kvmppc_vcpu_enable_spe(struct kvm_vcpu *vcpu)
 	preempt_disable();
 	enable_kernel_spe();
 	kvmppc_load_guest_spe(vcpu);
+	disable_kernel_spe();
 	vcpu->arch.shadow_msr |= MSR_SPE;
 	preempt_enable();
 }
@@ -141,6 +143,7 @@ static inline void kvmppc_load_guest_fp(struct kvm_vcpu *vcpu)
 	if (!(current->thread.regs->msr & MSR_FP)) {
 		enable_kernel_fp();
 		load_fp_state(&vcpu->arch.fp);
+		disable_kernel_fp();
 		current->thread.fp_save_area = &vcpu->arch.fp;
 		current->thread.regs->msr |= MSR_FP;
 	}
@@ -182,6 +185,7 @@ static inline void kvmppc_load_guest_altivec(struct kvm_vcpu *vcpu)
 		if (!(current->thread.regs->msr & MSR_VEC)) {
 			enable_kernel_altivec();
 			load_vr_state(&vcpu->arch.vr);
+			disable_kernel_altivec();
 			current->thread.vr_save_area = &vcpu->arch.vr;
 			current->thread.regs->msr |= MSR_VEC;
 		}
@@ -988,7 +992,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	kvmppc_restart_interrupt(vcpu, exit_nr);
 
 	/*
-	 * get last instruction before beeing preempted
+	 * get last instruction before being preempted
 	 * TODO: for e6500 check also BOOKE_INTERRUPT_LRAT_ERROR & ESR_DATA
 	 */
 	switch (exit_nr) {
diff --git a/arch/powerpc/kvm/e500.h b/arch/powerpc/kvm/e500.h
index 72920bed3ac6..94f04fcb373e 100644
--- a/arch/powerpc/kvm/e500.h
+++ b/arch/powerpc/kvm/e500.h
@@ -41,7 +41,7 @@ enum vcpu_ftr {
 #define E500_TLB_MAS2_ATTR	(0x7f)
 
 struct tlbe_ref {
-	pfn_t pfn;		/* valid only for TLB0, except briefly */
+	kvm_pfn_t pfn;		/* valid only for TLB0, except briefly */
 	unsigned int flags;	/* E500_TLB_* */
 };
 
diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c
index 34c43fff4adb..b0333cc737dd 100644
--- a/arch/powerpc/kvm/e500_mmu_host.c
+++ b/arch/powerpc/kvm/e500_mmu_host.c
@@ -163,9 +163,9 @@ void kvmppc_map_magic(struct kvm_vcpu *vcpu)
 	struct kvm_book3e_206_tlb_entry magic;
 	ulong shared_page = ((ulong)vcpu->arch.shared) & PAGE_MASK;
 	unsigned int stid;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 
-	pfn = (pfn_t)virt_to_phys((void *)shared_page) >> PAGE_SHIFT;
+	pfn = (kvm_pfn_t)virt_to_phys((void *)shared_page) >> PAGE_SHIFT;
 	get_page(pfn_to_page(pfn));
 
 	preempt_disable();
@@ -246,7 +246,7 @@ static inline int tlbe_is_writable(struct kvm_book3e_206_tlb_entry *tlbe)
 
 static inline void kvmppc_e500_ref_setup(struct tlbe_ref *ref,
 					 struct kvm_book3e_206_tlb_entry *gtlbe,
-					 pfn_t pfn, unsigned int wimg)
+					 kvm_pfn_t pfn, unsigned int wimg)
 {
 	ref->pfn = pfn;
 	ref->flags = E500_TLB_VALID;
@@ -309,7 +309,7 @@ static void kvmppc_e500_setup_stlbe(
 	int tsize, struct tlbe_ref *ref, u64 gvaddr,
 	struct kvm_book3e_206_tlb_entry *stlbe)
 {
-	pfn_t pfn = ref->pfn;
+	kvm_pfn_t pfn = ref->pfn;
 	u32 pr = vcpu->arch.shared->msr & MSR_PR;
 
 	BUG_ON(!(ref->flags & E500_TLB_VALID));
diff --git a/arch/powerpc/kvm/e500mc.c b/arch/powerpc/kvm/e500mc.c
index cda695de8aa7..f48a0c22e8f9 100644
--- a/arch/powerpc/kvm/e500mc.c
+++ b/arch/powerpc/kvm/e500mc.c
@@ -182,7 +182,7 @@ int kvmppc_core_check_processor_compat(void)
 		r = 0;
 #ifdef CONFIG_ALTIVEC
 	/*
-	 * Since guests have the priviledge to enable AltiVec, we need AltiVec
+	 * Since guests have the privilege to enable AltiVec, we need AltiVec
 	 * support in the host to save/restore their context.
 	 * Don't use CPU_FTR_ALTIVEC to identify cores with AltiVec unit
 	 * because it's cleared in the absence of CONFIG_ALTIVEC!
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 6fd2405c7f4a..6a68730774ee 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -33,6 +33,7 @@
 #include <asm/tlbflush.h>
 #include <asm/cputhreads.h>
 #include <asm/irqflags.h>
+#include <asm/iommu.h>
 #include "timing.h"
 #include "irq.h"
 #include "../mm/mmu_decl.h"
@@ -95,6 +96,9 @@ int kvmppc_prepare_to_enter(struct kvm_vcpu *vcpu)
 		 * so we don't miss a request because the requester sees
 		 * OUTSIDE_GUEST_MODE and assumes we'll be checking requests
 		 * before next entering the guest (and thus doesn't IPI).
+		 * This also orders the write to mode from any reads
+		 * to the page tables done while the VCPU is running.
+		 * Please see the comment in kvm_flush_remote_tlbs.
 		 */
 		smp_mb();
 
@@ -437,6 +441,16 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	unsigned int i;
 	struct kvm_vcpu *vcpu;
 
+#ifdef CONFIG_KVM_XICS
+	/*
+	 * We call kick_all_cpus_sync() to ensure that all
+	 * CPUs have executed any pending IPIs before we
+	 * continue and free VCPUs structures below.
+	 */
+	if (is_kvmppc_hv_enabled(kvm))
+		kick_all_cpus_sync();
+#endif
+
 	kvm_for_each_vcpu(i, vcpu, kvm)
 		kvm_arch_vcpu_free(vcpu);
 
@@ -509,6 +523,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 
 #ifdef CONFIG_PPC_BOOK3S_64
 	case KVM_CAP_SPAPR_TCE:
+	case KVM_CAP_SPAPR_TCE_64:
 	case KVM_CAP_PPC_ALLOC_HTAB:
 	case KVM_CAP_PPC_RTAS:
 	case KVM_CAP_PPC_FIXUP_HCALL:
@@ -569,6 +584,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_PPC_GET_SMMU_INFO:
 		r = 1;
 		break;
+	case KVM_CAP_SPAPR_MULTITCE:
+		r = 1;
+		break;
 #endif
 	default:
 		r = 0;
@@ -919,21 +937,17 @@ int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg)
 				r = -ENXIO;
 				break;
 			}
-			vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0] = val.vval;
+			val.vval = vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0];
 			break;
 		case KVM_REG_PPC_VSCR:
 			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
 				r = -ENXIO;
 				break;
 			}
-			vcpu->arch.vr.vscr.u[3] = set_reg_val(reg->id, val);
+			val = get_reg_val(reg->id, vcpu->arch.vr.vscr.u[3]);
 			break;
 		case KVM_REG_PPC_VRSAVE:
-			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
-				r = -ENXIO;
-				break;
-			}
-			vcpu->arch.vrsave = set_reg_val(reg->id, val);
+			val = get_reg_val(reg->id, vcpu->arch.vrsave);
 			break;
 #endif /* CONFIG_ALTIVEC */
 		default:
@@ -974,17 +988,21 @@ int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg)
 				r = -ENXIO;
 				break;
 			}
-			val.vval = vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0];
+			vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0] = val.vval;
 			break;
 		case KVM_REG_PPC_VSCR:
 			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
 				r = -ENXIO;
 				break;
 			}
-			val = get_reg_val(reg->id, vcpu->arch.vr.vscr.u[3]);
+			vcpu->arch.vr.vscr.u[3] = set_reg_val(reg->id, val);
 			break;
 		case KVM_REG_PPC_VRSAVE:
-			val = get_reg_val(reg->id, vcpu->arch.vrsave);
+			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
+				r = -ENXIO;
+				break;
+			}
+			vcpu->arch.vrsave = set_reg_val(reg->id, val);
 			break;
 #endif /* CONFIG_ALTIVEC */
 		default:
@@ -1331,13 +1349,34 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		break;
 	}
 #ifdef CONFIG_PPC_BOOK3S_64
+	case KVM_CREATE_SPAPR_TCE_64: {
+		struct kvm_create_spapr_tce_64 create_tce_64;
+
+		r = -EFAULT;
+		if (copy_from_user(&create_tce_64, argp, sizeof(create_tce_64)))
+			goto out;
+		if (create_tce_64.flags) {
+			r = -EINVAL;
+			goto out;
+		}
+		r = kvm_vm_ioctl_create_spapr_tce(kvm, &create_tce_64);
+		goto out;
+	}
 	case KVM_CREATE_SPAPR_TCE: {
 		struct kvm_create_spapr_tce create_tce;
+		struct kvm_create_spapr_tce_64 create_tce_64;
 
 		r = -EFAULT;
 		if (copy_from_user(&create_tce, argp, sizeof(create_tce)))
 			goto out;
-		r = kvm_vm_ioctl_create_spapr_tce(kvm, &create_tce);
+
+		create_tce_64.liobn = create_tce.liobn;
+		create_tce_64.page_shift = IOMMU_PAGE_SHIFT_4K;
+		create_tce_64.offset = 0;
+		create_tce_64.size = create_tce.window_size >>
+				IOMMU_PAGE_SHIFT_4K;
+		create_tce_64.flags = 0;
+		r = kvm_vm_ioctl_create_spapr_tce(kvm, &create_tce_64);
 		goto out;
 	}
 	case KVM_PPC_GET_SMMU_INFO: {
diff --git a/arch/powerpc/kvm/trace_pr.h b/arch/powerpc/kvm/trace_pr.h
index 810507cb688a..d44f324184fb 100644
--- a/arch/powerpc/kvm/trace_pr.h
+++ b/arch/powerpc/kvm/trace_pr.h
@@ -30,7 +30,7 @@ TRACE_EVENT(kvm_book3s_reenter,
 #ifdef CONFIG_PPC_BOOK3S_64
 
 TRACE_EVENT(kvm_book3s_64_mmu_map,
-	TP_PROTO(int rflags, ulong hpteg, ulong va, pfn_t hpaddr,
+	TP_PROTO(int rflags, ulong hpteg, ulong va, kvm_pfn_t hpaddr,
 		 struct kvmppc_pte *orig_pte),
 	TP_ARGS(rflags, hpteg, va, hpaddr, orig_pte),
 
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index a47e14277fd8..ba21be15310f 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -6,8 +6,8 @@ subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
 
 ccflags-$(CONFIG_PPC64)	:= $(NO_MINIMAL_TOC)
 
-CFLAGS_REMOVE_code-patching.o = -pg
-CFLAGS_REMOVE_feature-fixups.o = -pg
+CFLAGS_REMOVE_code-patching.o = $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_feature-fixups.o = $(CC_FLAGS_FTRACE)
 
 obj-y += string.o alloc.o crtsavres.o ppc_ksyms.o code-patching.o \
 	 feature-fixups.o
@@ -22,8 +22,7 @@ obj64-$(CONFIG_SMP)	+= locks.o
 obj64-$(CONFIG_ALTIVEC)	+= vmx-helper.o
 
 ifeq ($(CONFIG_GENERIC_CSUM),)
-obj-y			+= checksum_$(CONFIG_WORD_SIZE).o
-obj-$(CONFIG_PPC64)	+= checksum_wrappers_64.o
+obj-y			+= checksum_$(CONFIG_WORD_SIZE).o checksum_wrappers.o
 endif
 
 obj-$(CONFIG_PPC_EMULATE_SSTEP)	+= sstep.o ldstfp.o
diff --git a/arch/powerpc/lib/checksum_32.S b/arch/powerpc/lib/checksum_32.S
index 6d67e057f15e..d90870a66b60 100644
--- a/arch/powerpc/lib/checksum_32.S
+++ b/arch/powerpc/lib/checksum_32.S
@@ -14,68 +14,59 @@
 
 #include <linux/sys.h>
 #include <asm/processor.h>
+#include <asm/cache.h>
 #include <asm/errno.h>
 #include <asm/ppc_asm.h>
 
 	.text
 
 /*
- * ip_fast_csum(buf, len) -- Optimized for IP header
- * len is in words and is always >= 5.
- */
-_GLOBAL(ip_fast_csum)
-	lwz	r0,0(r3)
-	lwzu	r5,4(r3)
-	addic.	r4,r4,-2
-	addc	r0,r0,r5
-	mtctr	r4
-	blelr-
-1:	lwzu	r4,4(r3)
-	adde	r0,r0,r4
-	bdnz	1b
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
  * computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit)
  *
- * csum_partial(buff, len, sum)
+ * __csum_partial(buff, len, sum)
  */
-_GLOBAL(csum_partial)
-	addic	r0,r5,0
+_GLOBAL(__csum_partial)
 	subi	r3,r3,4
-	srwi.	r6,r4,2
+	srawi.	r6,r4,2		/* Divide len by 4 and also clear carry */
 	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r5,r3,2		/* Align buffer to longword boundary */
+	andi.	r0,r3,2		/* Align buffer to longword boundary */
 	beq+	1f
-	lhz	r5,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
+	lhz	r0,4(r3)	/* do 2 bytes to get aligned */
 	subi	r4,r4,2
-	addc	r0,r0,r5
+	addi	r3,r3,2
 	srwi.	r6,r4,2		/* # words to do */
+	adde	r5,r5,r0
 	beq	3f
-1:	mtctr	r6
-2:	lwzu	r5,4(r3)	/* the bdnz has zero overhead, so it should */
-	adde	r0,r0,r5	/* be unnecessary to unroll this loop */
+1:	andi.	r6,r6,3		/* Prepare to handle words 4 by 4 */
+	beq	21f
+	mtctr	r6
+2:	lwzu	r0,4(r3)
+	adde	r5,r5,r0
 	bdnz	2b
-	andi.	r4,r4,3
-3:	cmpwi	0,r4,2
-	blt+	4f
-	lhz	r5,4(r3)
+21:	srwi.	r6,r4,4		/* # blocks of 4 words to do */
+	beq	3f
+	mtctr	r6
+22:	lwz	r0,4(r3)
+	lwz	r6,8(r3)
+	lwz	r7,12(r3)
+	lwzu	r8,16(r3)
+	adde	r5,r5,r0
+	adde	r5,r5,r6
+	adde	r5,r5,r7
+	adde	r5,r5,r8
+	bdnz	22b
+3:	andi.	r0,r4,2
+	beq+	4f
+	lhz	r0,4(r3)
 	addi	r3,r3,2
-	subi	r4,r4,2
-	adde	r0,r0,r5
-4:	cmpwi	0,r4,1
-	bne+	5f
-	lbz	r5,4(r3)
-	slwi	r5,r5,8		/* Upper byte of word */
-	adde	r0,r0,r5
-5:	addze	r3,r0		/* add in final carry */
+	adde	r5,r5,r0
+4:	andi.	r0,r4,1
+	beq+	5f
+	lbz	r0,4(r3)
+	slwi	r0,r0,8		/* Upper byte of word */
+	adde	r5,r5,r0
+5:	addze	r3,r5		/* add in final carry */
 	blr
 
 /*
@@ -87,123 +78,220 @@ _GLOBAL(csum_partial)
  *
  * csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err)
  */
+#define CSUM_COPY_16_BYTES_WITHEX(n)	\
+8 ## n ## 0:			\
+	lwz	r7,4(r4);	\
+8 ## n ## 1:			\
+	lwz	r8,8(r4);	\
+8 ## n ## 2:			\
+	lwz	r9,12(r4);	\
+8 ## n ## 3:			\
+	lwzu	r10,16(r4);	\
+8 ## n ## 4:			\
+	stw	r7,4(r6);	\
+	adde	r12,r12,r7;	\
+8 ## n ## 5:			\
+	stw	r8,8(r6);	\
+	adde	r12,r12,r8;	\
+8 ## n ## 6:			\
+	stw	r9,12(r6);	\
+	adde	r12,r12,r9;	\
+8 ## n ## 7:			\
+	stwu	r10,16(r6);	\
+	adde	r12,r12,r10
+
+#define CSUM_COPY_16_BYTES_EXCODE(n)		\
+.section __ex_table,"a";		\
+	.align	2;			\
+	.long	8 ## n ## 0b,src_error;	\
+	.long	8 ## n ## 1b,src_error;	\
+	.long	8 ## n ## 2b,src_error;	\
+	.long	8 ## n ## 3b,src_error;	\
+	.long	8 ## n ## 4b,dst_error;	\
+	.long	8 ## n ## 5b,dst_error;	\
+	.long	8 ## n ## 6b,dst_error;	\
+	.long	8 ## n ## 7b,dst_error;	\
+	.text
+
+	.text
+	.stabs	"arch/powerpc/lib/",N_SO,0,0,0f
+	.stabs	"checksum_32.S",N_SO,0,0,0f
+0:
+
+CACHELINE_BYTES = L1_CACHE_BYTES
+LG_CACHELINE_BYTES = L1_CACHE_SHIFT
+CACHELINE_MASK = (L1_CACHE_BYTES-1)
+
 _GLOBAL(csum_partial_copy_generic)
-	addic	r0,r6,0
-	subi	r3,r3,4
-	subi	r4,r4,4
-	srwi.	r6,r5,2
-	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r9,r4,2		/* Align dst to longword boundary */
-	beq+	1f
-81:	lhz	r6,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
-	subi	r5,r5,2
-91:	sth	r6,4(r4)
-	addi	r4,r4,2
-	addc	r0,r0,r6
-	srwi.	r6,r5,2		/* # words to do */
-	beq	3f
-1:	srwi.	r6,r5,4		/* # groups of 4 words to do */
-	beq	10f
-	mtctr	r6
-71:	lwz	r6,4(r3)
-72:	lwz	r9,8(r3)
-73:	lwz	r10,12(r3)
-74:	lwzu	r11,16(r3)
-	adde	r0,r0,r6
-75:	stw	r6,4(r4)
-	adde	r0,r0,r9
-76:	stw	r9,8(r4)
-	adde	r0,r0,r10
-77:	stw	r10,12(r4)
-	adde	r0,r0,r11
-78:	stwu	r11,16(r4)
-	bdnz	71b
-10:	rlwinm.	r6,r5,30,30,31	/* # words left to do */
-	beq	13f
-	mtctr	r6
-82:	lwzu	r9,4(r3)
-92:	stwu	r9,4(r4)
-	adde	r0,r0,r9
-	bdnz	82b
-13:	andi.	r5,r5,3
-3:	cmpwi	0,r5,2
-	blt+	4f
-83:	lhz	r6,4(r3)
-	addi	r3,r3,2
-	subi	r5,r5,2
-93:	sth	r6,4(r4)
+	stwu	r1,-16(r1)
+	stw	r7,12(r1)
+	stw	r8,8(r1)
+
+	andi.	r0,r4,1			/* is destination address even ? */
+	cmplwi	cr7,r0,0
+	addic	r12,r6,0
+	addi	r6,r4,-4
+	neg	r0,r4
+	addi	r4,r3,-4
+	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
+	beq	58f
+
+	cmplw	0,r5,r0			/* is this more than total to do? */
+	blt	63f			/* if not much to do */
+	andi.	r8,r0,3			/* get it word-aligned first */
+	mtctr	r8
+	beq+	61f
+	li	r3,0
+70:	lbz	r9,4(r4)		/* do some bytes */
+	addi	r4,r4,1
+	slwi	r3,r3,8
+	rlwimi	r3,r9,0,24,31
+71:	stb	r9,4(r6)
+	addi	r6,r6,1
+	bdnz	70b
+	adde	r12,r12,r3
+61:	subf	r5,r0,r5
+	srwi.	r0,r0,2
+	mtctr	r0
+	beq	58f
+72:	lwzu	r9,4(r4)		/* do some words */
+	adde	r12,r12,r9
+73:	stwu	r9,4(r6)
+	bdnz	72b
+
+58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
+	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
+	li	r11,4
+	beq	63f
+
+	/* Here we decide how far ahead to prefetch the source */
+	li	r3,4
+	cmpwi	r0,1
+	li	r7,0
+	ble	114f
+	li	r7,1
+#if MAX_COPY_PREFETCH > 1
+	/* Heuristically, for large transfers we prefetch
+	   MAX_COPY_PREFETCH cachelines ahead.  For small transfers
+	   we prefetch 1 cacheline ahead. */
+	cmpwi	r0,MAX_COPY_PREFETCH
+	ble	112f
+	li	r7,MAX_COPY_PREFETCH
+112:	mtctr	r7
+111:	dcbt	r3,r4
+	addi	r3,r3,CACHELINE_BYTES
+	bdnz	111b
+#else
+	dcbt	r3,r4
+	addi	r3,r3,CACHELINE_BYTES
+#endif /* MAX_COPY_PREFETCH > 1 */
+
+114:	subf	r8,r7,r0
+	mr	r0,r7
+	mtctr	r8
+
+53:	dcbt	r3,r4
+54:	dcbz	r11,r6
+/* the main body of the cacheline loop */
+	CSUM_COPY_16_BYTES_WITHEX(0)
+#if L1_CACHE_BYTES >= 32
+	CSUM_COPY_16_BYTES_WITHEX(1)
+#if L1_CACHE_BYTES >= 64
+	CSUM_COPY_16_BYTES_WITHEX(2)
+	CSUM_COPY_16_BYTES_WITHEX(3)
+#if L1_CACHE_BYTES >= 128
+	CSUM_COPY_16_BYTES_WITHEX(4)
+	CSUM_COPY_16_BYTES_WITHEX(5)
+	CSUM_COPY_16_BYTES_WITHEX(6)
+	CSUM_COPY_16_BYTES_WITHEX(7)
+#endif
+#endif
+#endif
+	bdnz	53b
+	cmpwi	r0,0
+	li	r3,4
+	li	r7,0
+	bne	114b
+
+63:	srwi.	r0,r5,2
+	mtctr	r0
+	beq	64f
+30:	lwzu	r0,4(r4)
+	adde	r12,r12,r0
+31:	stwu	r0,4(r6)
+	bdnz	30b
+
+64:	andi.	r0,r5,2
+	beq+	65f
+40:	lhz	r0,4(r4)
 	addi	r4,r4,2
-	adde	r0,r0,r6
-4:	cmpwi	0,r5,1
-	bne+	5f
-84:	lbz	r6,4(r3)
-94:	stb	r6,4(r4)
-	slwi	r6,r6,8		/* Upper byte of word */
-	adde	r0,r0,r6
-5:	addze	r3,r0		/* add in final carry */
+41:	sth	r0,4(r6)
+	adde	r12,r12,r0
+	addi	r6,r6,2
+65:	andi.	r0,r5,1
+	beq+	66f
+50:	lbz	r0,4(r4)
+51:	stb	r0,4(r6)
+	slwi	r0,r0,8
+	adde	r12,r12,r0
+66:	addze	r3,r12
+	addi	r1,r1,16
+	beqlr+	cr7
+	rlwinm	r3,r3,8,0,31	/* swap bytes for odd destination */
 	blr
 
-/* These shouldn't go in the fixup section, since that would
-   cause the ex_table addresses to get out of order. */
-
-src_error_4:
-	mfctr	r6		/* update # bytes remaining from ctr */
-	rlwimi	r5,r6,4,0,27
-	b	79f
-src_error_1:
-	li	r6,0
-	subi	r5,r5,2
-95:	sth	r6,4(r4)
-	addi	r4,r4,2
-79:	srwi.	r6,r5,2
-	beq	3f
-	mtctr	r6
-src_error_2:
-	li	r6,0
-96:	stwu	r6,4(r4)
-	bdnz	96b
-3:	andi.	r5,r5,3
-	beq	src_error
-src_error_3:
-	li	r6,0
-	mtctr	r5
-	addi	r4,r4,3
-97:	stbu	r6,1(r4)
-	bdnz	97b
+/* read fault */
 src_error:
-	cmpwi	0,r7,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r7)
-1:	addze	r3,r0
+	lwz	r7,12(r1)
+	addi	r1,r1,16
+	cmpwi	cr0,r7,0
+	beqlr
+	li	r0,-EFAULT
+	stw	r0,0(r7)
 	blr
-
+/* write fault */
 dst_error:
-	cmpwi	0,r8,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r8)
-1:	addze	r3,r0
+	lwz	r8,8(r1)
+	addi	r1,r1,16
+	cmpwi	cr0,r8,0
+	beqlr
+	li	r0,-EFAULT
+	stw	r0,0(r8)
 	blr
 
-.section __ex_table,"a"
-	.long	81b,src_error_1
-	.long	91b,dst_error
-	.long	71b,src_error_4
-	.long	72b,src_error_4
-	.long	73b,src_error_4
-	.long	74b,src_error_4
-	.long	75b,dst_error
-	.long	76b,dst_error
-	.long	77b,dst_error
-	.long	78b,dst_error
-	.long	82b,src_error_2
-	.long	92b,dst_error
-	.long	83b,src_error_3
-	.long	93b,dst_error
-	.long	84b,src_error_3
-	.long	94b,dst_error
-	.long	95b,dst_error
-	.long	96b,dst_error
-	.long	97b,dst_error
+	.section __ex_table,"a"
+	.align	2
+	.long	70b,src_error
+	.long	71b,dst_error
+	.long	72b,src_error
+	.long	73b,dst_error
+	.long	54b,dst_error
+	.text
+
+/*
+ * this stuff handles faults in the cacheline loop and branches to either
+ * src_error (if in read part) or dst_error (if in write part)
+ */
+	CSUM_COPY_16_BYTES_EXCODE(0)
+#if L1_CACHE_BYTES >= 32
+	CSUM_COPY_16_BYTES_EXCODE(1)
+#if L1_CACHE_BYTES >= 64
+	CSUM_COPY_16_BYTES_EXCODE(2)
+	CSUM_COPY_16_BYTES_EXCODE(3)
+#if L1_CACHE_BYTES >= 128
+	CSUM_COPY_16_BYTES_EXCODE(4)
+	CSUM_COPY_16_BYTES_EXCODE(5)
+	CSUM_COPY_16_BYTES_EXCODE(6)
+	CSUM_COPY_16_BYTES_EXCODE(7)
+#endif
+#endif
+#endif
+
+	.section __ex_table,"a"
+	.align	2
+	.long	30b,src_error
+	.long	31b,dst_error
+	.long	40b,src_error
+	.long	41b,dst_error
+	.long	50b,src_error
+	.long	51b,dst_error
diff --git a/arch/powerpc/lib/checksum_64.S b/arch/powerpc/lib/checksum_64.S
index f3ef35436612..8e6e51016cc5 100644
--- a/arch/powerpc/lib/checksum_64.S
+++ b/arch/powerpc/lib/checksum_64.S
@@ -18,39 +18,12 @@
 #include <asm/ppc_asm.h>
 
 /*
- * ip_fast_csum(r3=buf, r4=len) -- Optimized for IP header
- * len is in words and is always >= 5.
- *
- * In practice len == 5, but this is not guaranteed.  So this code does not
- * attempt to use doubleword instructions.
- */
-_GLOBAL(ip_fast_csum)
-	lwz	r0,0(r3)
-	lwzu	r5,4(r3)
-	addic.	r4,r4,-2
-	addc	r0,r0,r5
-	mtctr	r4
-	blelr-
-1:	lwzu	r4,4(r3)
-	adde	r0,r0,r4
-	bdnz	1b
-	addze	r0,r0		/* add in final carry */
-        rldicl  r4,r0,32,0      /* fold two 32-bit halves together */
-        add     r0,r0,r4
-        srdi    r0,r0,32
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
  * Computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit).
  *
- * csum_partial(r3=buff, r4=len, r5=sum)
+ * __csum_partial(r3=buff, r4=len, r5=sum)
  */
-_GLOBAL(csum_partial)
+_GLOBAL(__csum_partial)
 	addic	r0,r5,0			/* clear carry */
 
 	srdi.	r6,r4,3			/* less than 8 bytes? */
diff --git a/arch/powerpc/lib/checksum_wrappers_64.c b/arch/powerpc/lib/checksum_wrappers.c
index 08e3a3356c40..08e3a3356c40 100644
--- a/arch/powerpc/lib/checksum_wrappers_64.c
+++ b/arch/powerpc/lib/checksum_wrappers.c
diff --git a/arch/powerpc/lib/ppc_ksyms.c b/arch/powerpc/lib/ppc_ksyms.c
index c7f8e9586316..c422812f7405 100644
--- a/arch/powerpc/lib/ppc_ksyms.c
+++ b/arch/powerpc/lib/ppc_ksyms.c
@@ -17,10 +17,8 @@ EXPORT_SYMBOL(strcmp);
 EXPORT_SYMBOL(strncmp);
 
 #ifndef CONFIG_GENERIC_CSUM
-EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(__csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_tcpudp_magic);
 #endif
 
 EXPORT_SYMBOL(__copy_tofrom_user);
diff --git a/arch/powerpc/lib/vmx-helper.c b/arch/powerpc/lib/vmx-helper.c
index ac93a3bd2730..b27e030fc9f8 100644
--- a/arch/powerpc/lib/vmx-helper.c
+++ b/arch/powerpc/lib/vmx-helper.c
@@ -46,6 +46,7 @@ int enter_vmx_usercopy(void)
  */
 int exit_vmx_usercopy(void)
 {
+	disable_kernel_altivec();
 	pagefault_enable();
 	preempt_enable();
 	return 0;
@@ -70,6 +71,7 @@ int enter_vmx_copy(void)
  */
 void *exit_vmx_copy(void *dest)
 {
+	disable_kernel_altivec();
 	preempt_enable();
 	return dest;
 }
diff --git a/arch/powerpc/lib/xor_vmx.c b/arch/powerpc/lib/xor_vmx.c
index e905f7c2ea7b..07f49f1568e5 100644
--- a/arch/powerpc/lib/xor_vmx.c
+++ b/arch/powerpc/lib/xor_vmx.c
@@ -74,6 +74,7 @@ void xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
 		v2 += 4;
 	} while (--lines > 0);
 
+	disable_kernel_altivec();
 	preempt_enable();
 }
 EXPORT_SYMBOL(xor_altivec_2);
@@ -102,6 +103,7 @@ void xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
 		v3 += 4;
 	} while (--lines > 0);
 
+	disable_kernel_altivec();
 	preempt_enable();
 }
 EXPORT_SYMBOL(xor_altivec_3);
@@ -135,6 +137,7 @@ void xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
 		v4 += 4;
 	} while (--lines > 0);
 
+	disable_kernel_altivec();
 	preempt_enable();
 }
 EXPORT_SYMBOL(xor_altivec_4);
@@ -172,6 +175,7 @@ void xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
 		v5 += 4;
 	} while (--lines > 0);
 
+	disable_kernel_altivec();
 	preempt_enable();
 }
 EXPORT_SYMBOL(xor_altivec_5);
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 5810967511d4..31a5d42df8c9 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -110,10 +110,10 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 		unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE;
 
 		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
+		*pmdp++ = __pmd(val);
+		*pmdp++ = __pmd(val);
+		*pmdp++ = __pmd(val);
+		*pmdp++ = __pmd(val);
 
 		v += LARGE_PAGE_SIZE_16M;
 		p += LARGE_PAGE_SIZE_16M;
@@ -125,7 +125,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 		unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE;
 
 		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
-		pmd_val(*pmdp) = val;
+		*pmdp = __pmd(val);
 
 		v += LARGE_PAGE_SIZE_4M;
 		p += LARGE_PAGE_SIZE_4M;
diff --git a/arch/powerpc/mm/8xx_mmu.c b/arch/powerpc/mm/8xx_mmu.c
new file mode 100644
index 000000000000..949100577db5
--- /dev/null
+++ b/arch/powerpc/mm/8xx_mmu.c
@@ -0,0 +1,141 @@
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 8xx series of chips.
+ *  -- christophe
+ *
+ *  Derived from arch/powerpc/mm/40x_mmu.c:
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/memblock.h>
+
+#include "mmu_decl.h"
+
+extern int __map_without_ltlbs;
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+	/* Nothing to do for the time being but keep it similar to other PPC */
+}
+
+#define LARGE_PAGE_SIZE_4M	(1<<22)
+#define LARGE_PAGE_SIZE_8M	(1<<23)
+#define LARGE_PAGE_SIZE_64M	(1<<26)
+
+unsigned long __init mmu_mapin_ram(unsigned long top)
+{
+	unsigned long v, s, mapped;
+	phys_addr_t p;
+
+	v = KERNELBASE;
+	p = 0;
+	s = top;
+
+	if (__map_without_ltlbs)
+		return 0;
+
+#ifdef CONFIG_PPC_4K_PAGES
+	while (s >= LARGE_PAGE_SIZE_8M) {
+		pmd_t *pmdp;
+		unsigned long val = p | MD_PS8MEG;
+
+		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
+		*pmdp++ = __pmd(val);
+		*pmdp++ = __pmd(val + LARGE_PAGE_SIZE_4M);
+
+		v += LARGE_PAGE_SIZE_8M;
+		p += LARGE_PAGE_SIZE_8M;
+		s -= LARGE_PAGE_SIZE_8M;
+	}
+#else /* CONFIG_PPC_16K_PAGES */
+	while (s >= LARGE_PAGE_SIZE_64M) {
+		pmd_t *pmdp;
+		unsigned long val = p | MD_PS8MEG;
+
+		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
+		*pmdp++ = __pmd(val);
+
+		v += LARGE_PAGE_SIZE_64M;
+		p += LARGE_PAGE_SIZE_64M;
+		s -= LARGE_PAGE_SIZE_64M;
+	}
+#endif
+
+	mapped = top - s;
+
+	/* If the size of RAM is not an exact power of two, we may not
+	 * have covered RAM in its entirety with 8 MiB
+	 * pages. Consequently, restrict the top end of RAM currently
+	 * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
+	 * coverage with normal-sized pages (or other reasons) do not
+	 * attempt to allocate outside the allowed range.
+	 */
+	memblock_set_current_limit(mapped);
+
+	return mapped;
+}
+
+void setup_initial_memory_limit(phys_addr_t first_memblock_base,
+				phys_addr_t first_memblock_size)
+{
+	/* We don't currently support the first MEMBLOCK not mapping 0
+	 * physical on those processors
+	 */
+	BUG_ON(first_memblock_base != 0);
+
+#ifdef CONFIG_PIN_TLB
+	/* 8xx can only access 24MB at the moment */
+	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
+#else
+	/* 8xx can only access 8MB at the moment */
+	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
+#endif
+}
+
+/*
+ * Set up to use a given MMU context.
+ * id is context number, pgd is PGD pointer.
+ *
+ * We place the physical address of the new task page directory loaded
+ * into the MMU base register, and set the ASID compare register with
+ * the new "context."
+ */
+void set_context(unsigned long id, pgd_t *pgd)
+{
+	s16 offset = (s16)(__pa(swapper_pg_dir));
+
+#ifdef CONFIG_BDI_SWITCH
+	pgd_t	**ptr = *(pgd_t ***)(KERNELBASE + 0xf0);
+
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is passed as second argument.
+	 */
+	*(ptr + 1) = pgd;
+#endif
+
+	/* Register M_TW will contain base address of level 1 table minus the
+	 * lower part of the kernel PGDIR base address, so that all accesses to
+	 * level 1 table are done relative to lower part of kernel PGDIR base
+	 * address.
+	 */
+	mtspr(SPRN_M_TW, __pa(pgd) - offset);
+
+	/* Update context */
+	mtspr(SPRN_M_CASID, id);
+	/* sync */
+	mb();
+}
+
+void flush_instruction_cache(void)
+{
+	isync();
+	mtspr(SPRN_IC_CST, IDC_INVALL);
+	isync();
+}
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 3eb73a38220d..adfee3f1aeb9 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -14,14 +14,18 @@ obj-$(CONFIG_PPC_MMU_NOHASH)	+= mmu_context_nohash.o tlb_nohash.o \
 obj-$(CONFIG_PPC_BOOK3E)	+= tlb_low_$(CONFIG_WORD_SIZE)e.o
 hash64-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC_STD_MMU_64)	+= hash_utils_64.o slb_low.o slb.o $(hash64-y)
-obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
-obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
-				   tlb_hash$(CONFIG_WORD_SIZE).o \
+obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o hash_low_32.o
+obj-$(CONFIG_PPC_STD_MMU)	+= tlb_hash$(CONFIG_WORD_SIZE).o \
 				   mmu_context_hash$(CONFIG_WORD_SIZE).o
+ifeq ($(CONFIG_PPC_STD_MMU_64),y)
+obj-$(CONFIG_PPC_4K_PAGES)	+= hash64_4k.o
+obj-$(CONFIG_PPC_64K_PAGES)	+= hash64_64k.o
+endif
 obj-$(CONFIG_PPC_ICSWX)		+= icswx.o
 obj-$(CONFIG_PPC_ICSWX_PID)	+= icswx_pid.o
 obj-$(CONFIG_40x)		+= 40x_mmu.o
 obj-$(CONFIG_44x)		+= 44x_mmu.o
+obj-$(CONFIG_PPC_8xx)		+= 8xx_mmu.o
 obj-$(CONFIG_PPC_FSL_BOOK3E)	+= fsl_booke_mmu.o
 obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
 obj-$(CONFIG_PPC_SPLPAR)	+= vphn.o
diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c
index 169aba446a74..2dc74e5c6458 100644
--- a/arch/powerpc/mm/dma-noncoherent.c
+++ b/arch/powerpc/mm/dma-noncoherent.c
@@ -327,7 +327,7 @@ void __dma_sync(void *vaddr, size_t size, int direction)
 		 * invalidate only when cache-line aligned otherwise there is
 		 * the potential for discarding uncommitted data from the cache
 		 */
-		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+		if ((start | end) & (L1_CACHE_BYTES - 1))
 			flush_dcache_range(start, end);
 		else
 			invalidate_dcache_range(start, end);
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index f3afe3d97f6b..a1b2713f6e96 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -72,10 +72,11 @@ unsigned long tlbcam_sz(int idx)
 	return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
 }
 
+#ifdef CONFIG_FSL_BOOKE
 /*
  * Return PA for this VA if it is mapped by a CAM, or 0
  */
-phys_addr_t v_mapped_by_tlbcam(unsigned long va)
+phys_addr_t v_block_mapped(unsigned long va)
 {
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)
@@ -87,7 +88,7 @@ phys_addr_t v_mapped_by_tlbcam(unsigned long va)
 /*
  * Return VA for a given PA or 0 if not mapped
  */
-unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
+unsigned long p_block_mapped(phys_addr_t pa)
 {
 	int b;
 	for (b = 0; b < tlbcam_index; ++b)
@@ -97,6 +98,7 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa)
 			return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
 	return 0;
 }
+#endif
 
 /*
  * Set up a variable-size TLB entry (tlbcam). The parameters are not checked;
diff --git a/arch/powerpc/mm/hash64_4k.c b/arch/powerpc/mm/hash64_4k.c
new file mode 100644
index 000000000000..47d1b26effc6
--- /dev/null
+++ b/arch/powerpc/mm/hash64_4k.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright IBM Corporation, 2015
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+#include <linux/mm.h>
+#include <asm/machdep.h>
+#include <asm/mmu.h>
+
+int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
+		   pte_t *ptep, unsigned long trap, unsigned long flags,
+		   int ssize, int subpg_prot)
+{
+	unsigned long hpte_group;
+	unsigned long rflags, pa;
+	unsigned long old_pte, new_pte;
+	unsigned long vpn, hash, slot;
+	unsigned long shift = mmu_psize_defs[MMU_PAGE_4K].shift;
+
+	/*
+	 * atomically mark the linux large page PTE busy and dirty
+	 */
+	do {
+		pte_t pte = READ_ONCE(*ptep);
+
+		old_pte = pte_val(pte);
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/*
+		 * Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access. Since this is 4K insert of 64K page size
+		 * also add _PAGE_COMBO
+		 */
+		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
+	} while (old_pte != __cmpxchg_u64((unsigned long *)ptep,
+					  old_pte, new_pte));
+	/*
+	 * PP bits. _PAGE_USER is already PP bit 0x2, so we only
+	 * need to add in 0x1 if it's a read-only user page
+	 */
+	rflags = htab_convert_pte_flags(new_pte);
+
+	if (!cpu_has_feature(CPU_FTR_NOEXECUTE) &&
+	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
+
+	vpn  = hpt_vpn(ea, vsid, ssize);
+	if (unlikely(old_pte & _PAGE_HASHPTE)) {
+		/*
+		 * There MIGHT be an HPTE for this pte
+		 */
+		hash = hpt_hash(vpn, shift, ssize);
+		if (old_pte & _PAGE_F_SECOND)
+			hash = ~hash;
+		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+		slot += (old_pte & _PAGE_F_GIX) >> _PAGE_F_GIX_SHIFT;
+
+		if (ppc_md.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_4K,
+					 MMU_PAGE_4K, ssize, flags) == -1)
+			old_pte &= ~_PAGE_HPTEFLAGS;
+	}
+
+	if (likely(!(old_pte & _PAGE_HASHPTE))) {
+
+		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
+		hash = hpt_hash(vpn, shift, ssize);
+
+repeat:
+		hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+
+		/* Insert into the hash table, primary slot */
+		slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0,
+				  MMU_PAGE_4K, MMU_PAGE_4K, ssize);
+		/*
+		 * Primary is full, try the secondary
+		 */
+		if (unlikely(slot == -1)) {
+			hpte_group = ((~hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+			slot = ppc_md.hpte_insert(hpte_group, vpn, pa,
+						  rflags, HPTE_V_SECONDARY,
+						  MMU_PAGE_4K, MMU_PAGE_4K, ssize);
+			if (slot == -1) {
+				if (mftb() & 0x1)
+					hpte_group = ((hash & htab_hash_mask) *
+						      HPTES_PER_GROUP) & ~0x7UL;
+				ppc_md.hpte_remove(hpte_group);
+				/*
+				 * FIXME!! Should be try the group from which we removed ?
+				 */
+				goto repeat;
+			}
+		}
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   MMU_PAGE_4K, MMU_PAGE_4K, old_pte);
+			return -1;
+		}
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
+		new_pte |= (slot << _PAGE_F_GIX_SHIFT) & (_PAGE_F_SECOND | _PAGE_F_GIX);
+	}
+	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+	return 0;
+}
diff --git a/arch/powerpc/mm/hash64_64k.c b/arch/powerpc/mm/hash64_64k.c
new file mode 100644
index 000000000000..b2d659cf51c6
--- /dev/null
+++ b/arch/powerpc/mm/hash64_64k.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright IBM Corporation, 2015
+ * Author Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+#include <linux/mm.h>
+#include <asm/machdep.h>
+#include <asm/mmu.h>
+/*
+ * index from 0 - 15
+ */
+bool __rpte_sub_valid(real_pte_t rpte, unsigned long index)
+{
+	unsigned long g_idx;
+	unsigned long ptev = pte_val(rpte.pte);
+
+	g_idx = (ptev & _PAGE_COMBO_VALID) >> _PAGE_F_GIX_SHIFT;
+	index = index >> 2;
+	if (g_idx & (0x1 << index))
+		return true;
+	else
+		return false;
+}
+/*
+ * index from 0 - 15
+ */
+static unsigned long mark_subptegroup_valid(unsigned long ptev, unsigned long index)
+{
+	unsigned long g_idx;
+
+	if (!(ptev & _PAGE_COMBO))
+		return ptev;
+	index = index >> 2;
+	g_idx = 0x1 << index;
+
+	return ptev | (g_idx << _PAGE_F_GIX_SHIFT);
+}
+
+int __hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
+		   pte_t *ptep, unsigned long trap, unsigned long flags,
+		   int ssize, int subpg_prot)
+{
+	real_pte_t rpte;
+	unsigned long *hidxp;
+	unsigned long hpte_group;
+	unsigned int subpg_index;
+	unsigned long rflags, pa, hidx;
+	unsigned long old_pte, new_pte, subpg_pte;
+	unsigned long vpn, hash, slot;
+	unsigned long shift = mmu_psize_defs[MMU_PAGE_4K].shift;
+
+	/*
+	 * atomically mark the linux large page PTE busy and dirty
+	 */
+	do {
+		pte_t pte = READ_ONCE(*ptep);
+
+		old_pte = pte_val(pte);
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/*
+		 * Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access. Since this is 4K insert of 64K page size
+		 * also add _PAGE_COMBO
+		 */
+		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED | _PAGE_COMBO;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
+	} while (old_pte != __cmpxchg_u64((unsigned long *)ptep,
+					  old_pte, new_pte));
+	/*
+	 * Handle the subpage protection bits
+	 */
+	subpg_pte = new_pte & ~subpg_prot;
+	rflags = htab_convert_pte_flags(subpg_pte);
+
+	if (!cpu_has_feature(CPU_FTR_NOEXECUTE) &&
+	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) {
+
+		/*
+		 * No CPU has hugepages but lacks no execute, so we
+		 * don't need to worry about that case
+		 */
+		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
+	}
+
+	subpg_index = (ea & (PAGE_SIZE - 1)) >> shift;
+	vpn  = hpt_vpn(ea, vsid, ssize);
+	rpte = __real_pte(__pte(old_pte), ptep);
+	/*
+	 *None of the sub 4k page is hashed
+	 */
+	if (!(old_pte & _PAGE_HASHPTE))
+		goto htab_insert_hpte;
+	/*
+	 * Check if the pte was already inserted into the hash table
+	 * as a 64k HW page, and invalidate the 64k HPTE if so.
+	 */
+	if (!(old_pte & _PAGE_COMBO)) {
+		flush_hash_page(vpn, rpte, MMU_PAGE_64K, ssize, flags);
+		/*
+		 * clear the old slot details from the old and new pte.
+		 * On hash insert failure we use old pte value and we don't
+		 * want slot information there if we have a insert failure.
+		 */
+		old_pte &= ~(_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND);
+		new_pte &= ~(_PAGE_HASHPTE | _PAGE_F_GIX | _PAGE_F_SECOND);
+		goto htab_insert_hpte;
+	}
+	/*
+	 * Check for sub page valid and update
+	 */
+	if (__rpte_sub_valid(rpte, subpg_index)) {
+		int ret;
+
+		hash = hpt_hash(vpn, shift, ssize);
+		hidx = __rpte_to_hidx(rpte, subpg_index);
+		if (hidx & _PTEIDX_SECONDARY)
+			hash = ~hash;
+		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+		slot += hidx & _PTEIDX_GROUP_IX;
+
+		ret = ppc_md.hpte_updatepp(slot, rflags, vpn,
+					   MMU_PAGE_4K, MMU_PAGE_4K,
+					   ssize, flags);
+		/*
+		 *if we failed because typically the HPTE wasn't really here
+		 * we try an insertion.
+		 */
+		if (ret == -1)
+			goto htab_insert_hpte;
+
+		*ptep = __pte(new_pte & ~_PAGE_BUSY);
+		return 0;
+	}
+
+htab_insert_hpte:
+	/*
+	 * handle _PAGE_4K_PFN case
+	 */
+	if (old_pte & _PAGE_4K_PFN) {
+		/*
+		 * All the sub 4k page have the same
+		 * physical address.
+		 */
+		pa = pte_pfn(__pte(old_pte)) << HW_PAGE_SHIFT;
+	} else {
+		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
+		pa += (subpg_index << shift);
+	}
+	hash = hpt_hash(vpn, shift, ssize);
+repeat:
+	hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+
+	/* Insert into the hash table, primary slot */
+	slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0,
+				  MMU_PAGE_4K, MMU_PAGE_4K, ssize);
+	/*
+	 * Primary is full, try the secondary
+	 */
+	if (unlikely(slot == -1)) {
+		hpte_group = ((~hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+		slot = ppc_md.hpte_insert(hpte_group, vpn, pa,
+					  rflags, HPTE_V_SECONDARY,
+					  MMU_PAGE_4K, MMU_PAGE_4K, ssize);
+		if (slot == -1) {
+			if (mftb() & 0x1)
+				hpte_group = ((hash & htab_hash_mask) *
+					      HPTES_PER_GROUP) & ~0x7UL;
+			ppc_md.hpte_remove(hpte_group);
+			/*
+			 * FIXME!! Should be try the group from which we removed ?
+			 */
+			goto repeat;
+		}
+	}
+	/*
+	 * Hypervisor failure. Restore old pte and return -1
+	 * similar to __hash_page_*
+	 */
+	if (unlikely(slot == -2)) {
+		*ptep = __pte(old_pte);
+		hash_failure_debug(ea, access, vsid, trap, ssize,
+				   MMU_PAGE_4K, MMU_PAGE_4K, old_pte);
+		return -1;
+	}
+	/*
+	 * Insert slot number & secondary bit in PTE second half,
+	 * clear _PAGE_BUSY and set appropriate HPTE slot bit
+	 * Since we have _PAGE_BUSY set on ptep, we can be sure
+	 * nobody is undating hidx.
+	 */
+	hidxp = (unsigned long *)(ptep + PTRS_PER_PTE);
+	rpte.hidx &= ~(0xfUL << (subpg_index << 2));
+	*hidxp = rpte.hidx  | (slot << (subpg_index << 2));
+	new_pte = mark_subptegroup_valid(new_pte, subpg_index);
+	new_pte |=  _PAGE_HASHPTE;
+	/*
+	 * check __real_pte for details on matching smp_rmb()
+	 */
+	smp_wmb();
+	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+	return 0;
+}
+
+int __hash_page_64K(unsigned long ea, unsigned long access,
+		    unsigned long vsid, pte_t *ptep, unsigned long trap,
+		    unsigned long flags, int ssize)
+{
+
+	unsigned long hpte_group;
+	unsigned long rflags, pa;
+	unsigned long old_pte, new_pte;
+	unsigned long vpn, hash, slot;
+	unsigned long shift = mmu_psize_defs[MMU_PAGE_64K].shift;
+
+	/*
+	 * atomically mark the linux large page PTE busy and dirty
+	 */
+	do {
+		pte_t pte = READ_ONCE(*ptep);
+
+		old_pte = pte_val(pte);
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/*
+		 * Check if PTE has the cache-inhibit bit set
+		 * If so, bail out and refault as a 4k page
+		 */
+		if (!mmu_has_feature(MMU_FTR_CI_LARGE_PAGE) &&
+		    unlikely(old_pte & _PAGE_NO_CACHE))
+			return 0;
+		/*
+		 * Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access.
+		 */
+		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
+	} while (old_pte != __cmpxchg_u64((unsigned long *)ptep,
+					  old_pte, new_pte));
+
+	rflags = htab_convert_pte_flags(new_pte);
+
+	if (!cpu_has_feature(CPU_FTR_NOEXECUTE) &&
+	    !cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
+
+	vpn  = hpt_vpn(ea, vsid, ssize);
+	if (unlikely(old_pte & _PAGE_HASHPTE)) {
+		/*
+		 * There MIGHT be an HPTE for this pte
+		 */
+		hash = hpt_hash(vpn, shift, ssize);
+		if (old_pte & _PAGE_F_SECOND)
+			hash = ~hash;
+		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+		slot += (old_pte & _PAGE_F_GIX) >> _PAGE_F_GIX_SHIFT;
+
+		if (ppc_md.hpte_updatepp(slot, rflags, vpn, MMU_PAGE_64K,
+					 MMU_PAGE_64K, ssize, flags) == -1)
+			old_pte &= ~_PAGE_HPTEFLAGS;
+	}
+
+	if (likely(!(old_pte & _PAGE_HASHPTE))) {
+
+		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
+		hash = hpt_hash(vpn, shift, ssize);
+
+repeat:
+		hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+
+		/* Insert into the hash table, primary slot */
+		slot = ppc_md.hpte_insert(hpte_group, vpn, pa, rflags, 0,
+				  MMU_PAGE_64K, MMU_PAGE_64K, ssize);
+		/*
+		 * Primary is full, try the secondary
+		 */
+		if (unlikely(slot == -1)) {
+			hpte_group = ((~hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
+			slot = ppc_md.hpte_insert(hpte_group, vpn, pa,
+						  rflags, HPTE_V_SECONDARY,
+						  MMU_PAGE_64K, MMU_PAGE_64K, ssize);
+			if (slot == -1) {
+				if (mftb() & 0x1)
+					hpte_group = ((hash & htab_hash_mask) *
+						      HPTES_PER_GROUP) & ~0x7UL;
+				ppc_md.hpte_remove(hpte_group);
+				/*
+				 * FIXME!! Should be try the group from which we removed ?
+				 */
+				goto repeat;
+			}
+		}
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   MMU_PAGE_64K, MMU_PAGE_64K, old_pte);
+			return -1;
+		}
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
+		new_pte |= (slot << _PAGE_F_GIX_SHIFT) & (_PAGE_F_SECOND | _PAGE_F_GIX);
+	}
+	*ptep = __pte(new_pte & ~_PAGE_BUSY);
+	return 0;
+}
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
deleted file mode 100644
index 3b49e3295901..000000000000
--- a/arch/powerpc/mm/hash_low_64.S
+++ /dev/null
@@ -1,1003 +0,0 @@
-/*
- * ppc64 MMU hashtable management routines
- *
- * (c) Copyright IBM Corp. 2003, 2005
- *
- * Maintained by: Benjamin Herrenschmidt
- *                <benh@kernel.crashing.org>
- *
- * This file is covered by the GNU Public Licence v2 as
- * described in the kernel's COPYING file.
- */
-
-#include <asm/reg.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/types.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cputable.h>
-
-	.text
-
-/*
- * Stackframe:
- *		
- *         +-> Back chain			(SP + 256)
- *         |   General register save area	(SP + 112)
- *         |   Parameter save area		(SP + 48)
- *         |   TOC save area			(SP + 40)
- *         |   link editor doubleword		(SP + 32)
- *         |   compiler doubleword		(SP + 24)
- *         |   LR save area			(SP + 16)
- *         |   CR save area			(SP + 8)
- * SP ---> +-- Back chain			(SP + 0)
- */
-
-#ifndef CONFIG_PPC_64K_PAGES
-
-/*****************************************************************************
- *                                                                           *
- *           4K SW & 4K HW pages implementation                              *
- *                                                                           *
- *****************************************************************************/
-
-
-/*
- * _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
- *		 pte_t *ptep, unsigned long trap, unsigned long flags,
- *		 int ssize)
- *
- * Adds a 4K page to the hash table in a segment of 4K pages only
- */
-
-_GLOBAL(__hash_page_4K)
-	mflr	r0
-	std	r0,16(r1)
-	stdu	r1,-STACKFRAMESIZE(r1)
-	/* Save all params that we need after a function call */
-	std	r6,STK_PARAM(R6)(r1)
-	std	r8,STK_PARAM(R8)(r1)
-	std	r9,STK_PARAM(R9)(r1)
-	
-	/* Save non-volatile registers.
-	 * r31 will hold "old PTE"
-	 * r30 is "new PTE"
-	 * r29 is vpn
-	 * r28 is a hash value
-	 * r27 is hashtab mask (maybe dynamic patched instead ?)
-	 */
-	std	r27,STK_REG(R27)(r1)
-	std	r28,STK_REG(R28)(r1)
-	std	r29,STK_REG(R29)(r1)
-	std	r30,STK_REG(R30)(r1)
-	std	r31,STK_REG(R31)(r1)
-	
-	/* Step 1:
-	 *
-	 * Check permissions, atomically mark the linux PTE busy
-	 * and hashed.
-	 */ 
-1:
-	ldarx	r31,0,r6
-	/* Check access rights (access & ~(pte_val(*ptep))) */
-	andc.	r0,r4,r31
-	bne-	htab_wrong_access
-	/* Check if PTE is busy */
-	andi.	r0,r31,_PAGE_BUSY
-	/* If so, just bail out and refault if needed. Someone else
-	 * is changing this PTE anyway and might hash it.
-	 */
-	bne-	htab_bail_ok
-
-	/* Prepare new PTE value (turn access RW into DIRTY, then
-	 * add BUSY,HASHPTE and ACCESSED)
-	 */
-	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
-	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
-	/* Write the linux PTE atomically (setting busy) */
-	stdcx.	r30,0,r6
-	bne-	1b
-	isync
-
-	/* Step 2:
-	 *
-	 * Insert/Update the HPTE in the hash table. At this point,
-	 * r4 (access) is re-useable, we use it for the new HPTE flags
-	 */
-
-BEGIN_FTR_SECTION
-	cmpdi	r9,0			/* check segment size */
-	bne	3f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	/* Calc vpn and put it in r29 */
-	sldi	r29,r5,SID_SHIFT - VPN_SHIFT
-	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
-	or	r29,r28,r29
-	/*
-	 * Calculate hash value for primary slot and store it in r28
-	 * r3 = va, r5 = vsid
-	 * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
-	 */
-	rldicl	r0,r3,64-12,48
-	xor	r28,r5,r0		/* hash */
-	b	4f
-
-3:	/* Calc vpn and put it in r29 */
-	sldi	r29,r5,SID_SHIFT_1T - VPN_SHIFT
-	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
-	or	r29,r28,r29
-
-	/*
-	 * calculate hash value for primary slot and
-	 * store it in r28 for 1T segment
-	 * r3 = va, r5 = vsid
-	 */
-	sldi	r28,r5,25		/* vsid << 25 */
-	/* r0 =  (va >> 12) & ((1ul << (40 - 12)) -1) */
-	rldicl	r0,r3,64-12,36
-	xor	r28,r28,r5		/* vsid ^ ( vsid << 25) */
-	xor	r28,r28,r0		/* hash */
-
-	/* Convert linux PTE bits into HW equivalents */
-4:	andi.	r3,r30,0x1fe		/* Get basic set of flags */
-	xori	r3,r3,HPTE_R_N		/* _PAGE_EXEC -> NOEXEC */
-	rlwinm	r0,r30,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
-	rlwinm	r4,r30,32-7+1,30,30	/* _PAGE_DIRTY -> _PAGE_USER (r4) */
-	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
-	andc	r0,r30,r0		/* r0 = pte & ~r0 */
-	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
-	/*
-	 * Always add "C" bit for perf. Memory coherence is always enabled
-	 */
-	ori	r3,r3,HPTE_R_C | HPTE_R_M
-
-	/* We eventually do the icache sync here (maybe inline that
-	 * code rather than call a C function...) 
-	 */
-BEGIN_FTR_SECTION
-	mr	r4,r30
-	mr	r5,r7
-	bl	hash_page_do_lazy_icache
-END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
-
-	/* At this point, r3 contains new PP bits, save them in
-	 * place of "access" in the param area (sic)
-	 */
-	std	r3,STK_PARAM(R4)(r1)
-
-	/* Get htab_hash_mask */
-	ld	r4,htab_hash_mask@got(2)
-	ld	r27,0(r4)	/* htab_hash_mask -> r27 */
-
-	/* Check if we may already be in the hashtable, in this case, we
-	 * go to out-of-line code to try to modify the HPTE
-	 */
-	andi.	r0,r31,_PAGE_HASHPTE
-	bne	htab_modify_pte
-
-htab_insert_pte:
-	/* Clear hpte bits in new pte (we also clear BUSY btw) and
-	 * add _PAGE_HASHPTE
-	 */
-	lis	r0,_PAGE_HPTEFLAGS@h
-	ori	r0,r0,_PAGE_HPTEFLAGS@l
-	andc	r30,r30,r0
-	ori	r30,r30,_PAGE_HASHPTE
-
-	/* physical address r5 */
-	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
-	sldi	r5,r5,PAGE_SHIFT
-
-	/* Calculate primary group hash */
-	and	r0,r28,r27
-	rldicr	r3,r0,3,63-3		/* r3 = (hash & mask) << 3 */
-
-	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve vpn */
-	li	r7,0			/* !bolted, !secondary */
-	li	r8,MMU_PAGE_4K		/* page size */
-	li	r9,MMU_PAGE_4K		/* actual page size */
-	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-.globl htab_call_hpte_insert1
-htab_call_hpte_insert1:
-	bl	.			/* Patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge	htab_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	htab_pte_insert_failure
-
-	/* Now try secondary slot */
-	
-	/* physical address r5 */
-	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
-	sldi	r5,r5,PAGE_SHIFT
-
-	/* Calculate secondary group hash */
-	andc	r0,r27,r28
-	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
-	
-	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve vpn */
-	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
-	li	r8,MMU_PAGE_4K		/* page size */
-	li	r9,MMU_PAGE_4K		/* actual page size */
-	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-.globl htab_call_hpte_insert2
-htab_call_hpte_insert2:
-	bl	.			/* Patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge+	htab_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	htab_pte_insert_failure
-
-	/* Both are full, we need to evict something */
-	mftb	r0
-	/* Pick a random group based on TB */
-	andi.	r0,r0,1
-	mr	r5,r28
-	bne	2f
-	not	r5,r5
-2:	and	r0,r5,r27
-	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */	
-	/* Call ppc_md.hpte_remove */
-.globl htab_call_hpte_remove
-htab_call_hpte_remove:
-	bl	.			/* Patched by htab_finish_init() */
-
-	/* Try all again */
-	b	htab_insert_pte	
-
-htab_bail_ok:
-	li	r3,0
-	b	htab_bail
-
-htab_pte_insert_ok:
-	/* Insert slot number & secondary bit in PTE */
-	rldimi	r30,r3,12,63-15
-		
-	/* Write out the PTE with a normal write
-	 * (maybe add eieio may be good still ?)
-	 */
-htab_write_out_pte:
-	ld	r6,STK_PARAM(R6)(r1)
-	std	r30,0(r6)
-	li	r3, 0
-htab_bail:
-	ld	r27,STK_REG(R27)(r1)
-	ld	r28,STK_REG(R28)(r1)
-	ld	r29,STK_REG(R29)(r1)
-	ld      r30,STK_REG(R30)(r1)
-	ld      r31,STK_REG(R31)(r1)
-	addi    r1,r1,STACKFRAMESIZE
-	ld      r0,16(r1)
-	mtlr    r0
-	blr
-
-htab_modify_pte:
-	/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
-	mr	r4,r3
-	rlwinm	r3,r31,32-12,29,31
-
-	/* Secondary group ? if yes, get a inverted hash value */
-	mr	r5,r28
-	andi.	r0,r31,_PAGE_SECONDARY
-	beq	1f
-	not	r5,r5
-1:
-	/* Calculate proper slot value for ppc_md.hpte_updatepp */
-	and	r0,r5,r27
-	rldicr	r0,r0,3,63-3	/* r0 = (hash & mask) << 3 */
-	add	r3,r0,r3	/* add slot idx */
-
-	/* Call ppc_md.hpte_updatepp */
-	mr	r5,r29			/* vpn */
-	li	r6,MMU_PAGE_4K		/* base page size */
-	li	r7,MMU_PAGE_4K		/* actual page size */
-	ld	r8,STK_PARAM(R9)(r1)	/* segment size */
-	ld	r9,STK_PARAM(R8)(r1)	/* get "flags" param */
-.globl htab_call_hpte_updatepp
-htab_call_hpte_updatepp:
-	bl	.			/* Patched by htab_finish_init() */
-
-	/* if we failed because typically the HPTE wasn't really here
-	 * we try an insertion. 
-	 */
-	cmpdi	0,r3,-1
-	beq-	htab_insert_pte
-
-	/* Clear the BUSY bit and Write out the PTE */
-	li	r0,_PAGE_BUSY
-	andc	r30,r30,r0
-	b	htab_write_out_pte
-
-htab_wrong_access:
-	/* Bail out clearing reservation */
-	stdcx.	r31,0,r6
-	li	r3,1
-	b	htab_bail
-
-htab_pte_insert_failure:
-	/* Bail out restoring old PTE */
-	ld	r6,STK_PARAM(R6)(r1)
-	std	r31,0(r6)
-	li	r3,-1
-	b	htab_bail
-
-
-#else /* CONFIG_PPC_64K_PAGES */
-
-
-/*****************************************************************************
- *                                                                           *
- *           64K SW & 4K or 64K HW in a 4K segment pages implementation      *
- *                                                                           *
- *****************************************************************************/
-
-/* _hash_page_4K(unsigned long ea, unsigned long access, unsigned long vsid,
- *		 pte_t *ptep, unsigned long trap, unsigned local flags,
- *		 int ssize, int subpg_prot)
- */
-
-/*
- * For now, we do NOT implement Admixed pages
- */
-_GLOBAL(__hash_page_4K)
-	mflr	r0
-	std	r0,16(r1)
-	stdu	r1,-STACKFRAMESIZE(r1)
-	/* Save all params that we need after a function call */
-	std	r6,STK_PARAM(R6)(r1)
-	std	r8,STK_PARAM(R8)(r1)
-	std	r9,STK_PARAM(R9)(r1)
-
-	/* Save non-volatile registers.
-	 * r31 will hold "old PTE"
-	 * r30 is "new PTE"
-	 * r29 is vpn
-	 * r28 is a hash value
-	 * r27 is hashtab mask (maybe dynamic patched instead ?)
-	 * r26 is the hidx mask
-	 * r25 is the index in combo page
-	 */
-	std	r25,STK_REG(R25)(r1)
-	std	r26,STK_REG(R26)(r1)
-	std	r27,STK_REG(R27)(r1)
-	std	r28,STK_REG(R28)(r1)
-	std	r29,STK_REG(R29)(r1)
-	std	r30,STK_REG(R30)(r1)
-	std	r31,STK_REG(R31)(r1)
-
-	/* Step 1:
-	 *
-	 * Check permissions, atomically mark the linux PTE busy
-	 * and hashed.
-	 */
-1:
-	ldarx	r31,0,r6
-	/* Check access rights (access & ~(pte_val(*ptep))) */
-	andc.	r0,r4,r31
-	bne-	htab_wrong_access
-	/* Check if PTE is busy */
-	andi.	r0,r31,_PAGE_BUSY
-	/* If so, just bail out and refault if needed. Someone else
-	 * is changing this PTE anyway and might hash it.
-	 */
-	bne-	htab_bail_ok
-	/* Prepare new PTE value (turn access RW into DIRTY, then
-	 * add BUSY and ACCESSED)
-	 */
-	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
-	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
-	oris	r30,r30,_PAGE_COMBO@h
-	/* Write the linux PTE atomically (setting busy) */
-	stdcx.	r30,0,r6
-	bne-	1b
-	isync
-
-	/* Step 2:
-	 *
-	 * Insert/Update the HPTE in the hash table. At this point,
-	 * r4 (access) is re-useable, we use it for the new HPTE flags
-	 */
-
-	/* Load the hidx index */
-	rldicl	r25,r3,64-12,60
-
-BEGIN_FTR_SECTION
-	cmpdi	r9,0			/* check segment size */
-	bne	3f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	/* Calc vpn and put it in r29 */
-	sldi	r29,r5,SID_SHIFT - VPN_SHIFT
-	/*
-	 * clrldi r3,r3,64 - SID_SHIFT -->  ea & 0xfffffff
-	 * srdi	 r28,r3,VPN_SHIFT
-	 */
-	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
-	or	r29,r28,r29
-	/*
-	 * Calculate hash value for primary slot and store it in r28
-	 * r3 = va, r5 = vsid
-	 * r0 = (va >> 12) & ((1ul << (28 - 12)) -1)
-	 */
-	rldicl	r0,r3,64-12,48
-	xor	r28,r5,r0		/* hash */
-	b	4f
-
-3:	/* Calc vpn and put it in r29 */
-	sldi	r29,r5,SID_SHIFT_1T - VPN_SHIFT
-	/*
-	 * clrldi r3,r3,64 - SID_SHIFT_1T -->  ea & 0xffffffffff
-	 * srdi	r28,r3,VPN_SHIFT
-	 */
-	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
-	or	r29,r28,r29
-
-	/*
-	 * Calculate hash value for primary slot and
-	 * store it in r28  for 1T segment
-	 * r3 = va, r5 = vsid
-	 */
-	sldi	r28,r5,25		/* vsid << 25 */
-	/* r0 = (va >> 12) & ((1ul << (40 - 12)) -1) */
-	rldicl	r0,r3,64-12,36
-	xor	r28,r28,r5		/* vsid ^ ( vsid << 25) */
-	xor	r28,r28,r0		/* hash */
-
-	/* Convert linux PTE bits into HW equivalents */
-4:
-#ifdef CONFIG_PPC_SUBPAGE_PROT
-	andc	r10,r30,r10
-	andi.	r3,r10,0x1fe		/* Get basic set of flags */
-	rlwinm	r0,r10,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
-#else
-	andi.	r3,r30,0x1fe		/* Get basic set of flags */
-	rlwinm	r0,r30,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
-#endif
-	xori	r3,r3,HPTE_R_N		/* _PAGE_EXEC -> NOEXEC */
-	rlwinm	r4,r30,32-7+1,30,30	/* _PAGE_DIRTY -> _PAGE_USER (r4) */
-	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
-	andc	r0,r3,r0		/* r0 = pte & ~r0 */
-	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
-	/*
-	 * Always add "C" bit for perf. Memory coherence is always enabled
-	 */
-	ori	r3,r3,HPTE_R_C | HPTE_R_M
-
-	/* We eventually do the icache sync here (maybe inline that
-	 * code rather than call a C function...)
-	 */
-BEGIN_FTR_SECTION
-	mr	r4,r30
-	mr	r5,r7
-	bl	hash_page_do_lazy_icache
-END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
-
-	/* At this point, r3 contains new PP bits, save them in
-	 * place of "access" in the param area (sic)
-	 */
-	std	r3,STK_PARAM(R4)(r1)
-
-	/* Get htab_hash_mask */
-	ld	r4,htab_hash_mask@got(2)
-	ld	r27,0(r4)	/* htab_hash_mask -> r27 */
-
-	/* Check if we may already be in the hashtable, in this case, we
-	 * go to out-of-line code to try to modify the HPTE. We look for
-	 * the bit at (1 >> (index + 32))
-	 */
-	rldicl.	r0,r31,64-12,48
-	li	r26,0			/* Default hidx */
-	beq	htab_insert_pte
-
-	/*
-	 * Check if the pte was already inserted into the hash table
-	 * as a 64k HW page, and invalidate the 64k HPTE if so.
-	 */
-	andis.	r0,r31,_PAGE_COMBO@h
-	beq	htab_inval_old_hpte
-
-	ld	r6,STK_PARAM(R6)(r1)
-	ori	r26,r6,PTE_PAGE_HIDX_OFFSET /* Load the hidx mask. */
-	ld	r26,0(r26)
-	addi	r5,r25,36		/* Check actual HPTE_SUB bit, this */
-	rldcr.	r0,r31,r5,0		/* must match pgtable.h definition */
-	bne	htab_modify_pte
-
-htab_insert_pte:
-	/* real page number in r5, PTE RPN value + index */
-	andis.	r0,r31,_PAGE_4K_PFN@h
-	srdi	r5,r31,PTE_RPN_SHIFT
-	bne-	htab_special_pfn
-	sldi	r5,r5,PAGE_FACTOR
-	add	r5,r5,r25
-htab_special_pfn:
-	sldi	r5,r5,HW_PAGE_SHIFT
-
-	/* Calculate primary group hash */
-	and	r0,r28,r27
-	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
-
-	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve vpn */
-	li	r7,0			/* !bolted, !secondary */
-	li	r8,MMU_PAGE_4K		/* page size */
-	li	r9,MMU_PAGE_4K		/* actual page size */
-	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-.globl htab_call_hpte_insert1
-htab_call_hpte_insert1:
-	bl	.			/* patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge	htab_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	htab_pte_insert_failure
-
-	/* Now try secondary slot */
-
-	/* real page number in r5, PTE RPN value + index */
-	andis.	r0,r31,_PAGE_4K_PFN@h
-	srdi	r5,r31,PTE_RPN_SHIFT
-	bne-	3f
-	sldi	r5,r5,PAGE_FACTOR
-	add	r5,r5,r25
-3:	sldi	r5,r5,HW_PAGE_SHIFT
-
-	/* Calculate secondary group hash */
-	andc	r0,r27,r28
-	rldicr	r3,r0,3,63-3		/* r0 = (~hash & mask) << 3 */
-
-	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve vpn */
-	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
-	li	r8,MMU_PAGE_4K		/* page size */
-	li	r9,MMU_PAGE_4K		/* actual page size */
-	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-.globl htab_call_hpte_insert2
-htab_call_hpte_insert2:
-	bl	.			/* patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge+	htab_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	htab_pte_insert_failure
-
-	/* Both are full, we need to evict something */
-	mftb	r0
-	/* Pick a random group based on TB */
-	andi.	r0,r0,1
-	mr	r5,r28
-	bne	2f
-	not	r5,r5
-2:	and	r0,r5,r27
-	rldicr	r3,r0,3,63-3		/* r0 = (hash & mask) << 3 */
-	/* Call ppc_md.hpte_remove */
-.globl htab_call_hpte_remove
-htab_call_hpte_remove:
-	bl	.			/* patched by htab_finish_init() */
-
-	/* Try all again */
-	b	htab_insert_pte
-
-	/*
-	 * Call out to C code to invalidate an 64k HW HPTE that is
-	 * useless now that the segment has been switched to 4k pages.
-	 */
-htab_inval_old_hpte:
-	mr	r3,r29			/* vpn */
-	mr	r4,r31			/* PTE.pte */
-	li	r5,0			/* PTE.hidx */
-	li	r6,MMU_PAGE_64K		/* psize */
-	ld	r7,STK_PARAM(R9)(r1)	/* ssize */
-	ld	r8,STK_PARAM(R8)(r1)	/* flags */
-	bl	flush_hash_page
-	/* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */
-	lis	r0,_PAGE_HPTE_SUB@h
-	ori	r0,r0,_PAGE_HPTE_SUB@l
-	andc	r30,r30,r0
-	b	htab_insert_pte
-	
-htab_bail_ok:
-	li	r3,0
-	b	htab_bail
-
-htab_pte_insert_ok:
-	/* Insert slot number & secondary bit in PTE second half,
-	 * clear _PAGE_BUSY and set approriate HPTE slot bit
-	 */
-	ld	r6,STK_PARAM(R6)(r1)
-	li	r0,_PAGE_BUSY
-	andc	r30,r30,r0
-	/* HPTE SUB bit */
-	li	r0,1
-	subfic	r5,r25,27		/* Must match bit position in */
-	sld	r0,r0,r5		/* pgtable.h */
-	or	r30,r30,r0
-	/* hindx */
-	sldi	r5,r25,2
-	sld	r3,r3,r5
-	li	r4,0xf
-	sld	r4,r4,r5
-	andc	r26,r26,r4
-	or	r26,r26,r3
-	ori	r5,r6,PTE_PAGE_HIDX_OFFSET
-	std	r26,0(r5)
-	lwsync
-	std	r30,0(r6)
-	li	r3, 0
-htab_bail:
-	ld	r25,STK_REG(R25)(r1)
-	ld	r26,STK_REG(R26)(r1)
-	ld	r27,STK_REG(R27)(r1)
-	ld	r28,STK_REG(R28)(r1)
-	ld	r29,STK_REG(R29)(r1)
-	ld      r30,STK_REG(R30)(r1)
-	ld      r31,STK_REG(R31)(r1)
-	addi    r1,r1,STACKFRAMESIZE
-	ld      r0,16(r1)
-	mtlr    r0
-	blr
-
-htab_modify_pte:
-	/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
-	mr	r4,r3
-	sldi	r5,r25,2
-	srd	r3,r26,r5
-
-	/* Secondary group ? if yes, get a inverted hash value */
-	mr	r5,r28
-	andi.	r0,r3,0x8 /* page secondary ? */
-	beq	1f
-	not	r5,r5
-1:	andi.	r3,r3,0x7 /* extract idx alone */
-
-	/* Calculate proper slot value for ppc_md.hpte_updatepp */
-	and	r0,r5,r27
-	rldicr	r0,r0,3,63-3	/* r0 = (hash & mask) << 3 */
-	add	r3,r0,r3	/* add slot idx */
-
-	/* Call ppc_md.hpte_updatepp */
-	mr	r5,r29			/* vpn */
-	li	r6,MMU_PAGE_4K		/* base page size */
-	li	r7,MMU_PAGE_4K		/* actual page size */
-	ld	r8,STK_PARAM(R9)(r1)	/* segment size */
-	ld	r9,STK_PARAM(R8)(r1)	/* get "flags" param */
-.globl htab_call_hpte_updatepp
-htab_call_hpte_updatepp:
-	bl	.			/* patched by htab_finish_init() */
-
-	/* if we failed because typically the HPTE wasn't really here
-	 * we try an insertion.
-	 */
-	cmpdi	0,r3,-1
-	beq-	htab_insert_pte
-
-	/* Clear the BUSY bit and Write out the PTE */
-	li	r0,_PAGE_BUSY
-	andc	r30,r30,r0
-	ld	r6,STK_PARAM(R6)(r1)
-	std	r30,0(r6)
-	li	r3,0
-	b	htab_bail
-
-htab_wrong_access:
-	/* Bail out clearing reservation */
-	stdcx.	r31,0,r6
-	li	r3,1
-	b	htab_bail
-
-htab_pte_insert_failure:
-	/* Bail out restoring old PTE */
-	ld	r6,STK_PARAM(R6)(r1)
-	std	r31,0(r6)
-	li	r3,-1
-	b	htab_bail
-
-#endif /* CONFIG_PPC_64K_PAGES */
-
-#ifdef CONFIG_PPC_64K_PAGES
-
-/*****************************************************************************
- *                                                                           *
- *           64K SW & 64K HW in a 64K segment pages implementation           *
- *                                                                           *
- *****************************************************************************/
-
-_GLOBAL(__hash_page_64K)
-	mflr	r0
-	std	r0,16(r1)
-	stdu	r1,-STACKFRAMESIZE(r1)
-	/* Save all params that we need after a function call */
-	std	r6,STK_PARAM(R6)(r1)
-	std	r8,STK_PARAM(R8)(r1)
-	std	r9,STK_PARAM(R9)(r1)
-
-	/* Save non-volatile registers.
-	 * r31 will hold "old PTE"
-	 * r30 is "new PTE"
-	 * r29 is vpn
-	 * r28 is a hash value
-	 * r27 is hashtab mask (maybe dynamic patched instead ?)
-	 */
-	std	r27,STK_REG(R27)(r1)
-	std	r28,STK_REG(R28)(r1)
-	std	r29,STK_REG(R29)(r1)
-	std	r30,STK_REG(R30)(r1)
-	std	r31,STK_REG(R31)(r1)
-
-	/* Step 1:
-	 *
-	 * Check permissions, atomically mark the linux PTE busy
-	 * and hashed.
-	 */
-1:
-	ldarx	r31,0,r6
-	/* Check access rights (access & ~(pte_val(*ptep))) */
-	andc.	r0,r4,r31
-	bne-	ht64_wrong_access
-	/* Check if PTE is busy */
-	andi.	r0,r31,_PAGE_BUSY
-	/* If so, just bail out and refault if needed. Someone else
-	 * is changing this PTE anyway and might hash it.
-	 */
-	bne-	ht64_bail_ok
-BEGIN_FTR_SECTION
-	/* Check if PTE has the cache-inhibit bit set */
-	andi.	r0,r31,_PAGE_NO_CACHE
-	/* If so, bail out and refault as a 4k page */
-	bne-	ht64_bail_ok
-END_MMU_FTR_SECTION_IFCLR(MMU_FTR_CI_LARGE_PAGE)
-	/* Prepare new PTE value (turn access RW into DIRTY, then
-	 * add BUSY and ACCESSED)
-	 */
-	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
-	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
-	/* Write the linux PTE atomically (setting busy) */
-	stdcx.	r30,0,r6
-	bne-	1b
-	isync
-
-	/* Step 2:
-	 *
-	 * Insert/Update the HPTE in the hash table. At this point,
-	 * r4 (access) is re-useable, we use it for the new HPTE flags
-	 */
-
-BEGIN_FTR_SECTION
-	cmpdi	r9,0			/* check segment size */
-	bne	3f
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
-	/* Calc vpn and put it in r29 */
-	sldi	r29,r5,SID_SHIFT - VPN_SHIFT
-	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT - VPN_SHIFT)
-	or	r29,r28,r29
-
-	/* Calculate hash value for primary slot and store it in r28
-	 * r3 = va, r5 = vsid
-	 * r0 = (va >> 16) & ((1ul << (28 - 16)) -1)
-	 */
-	rldicl	r0,r3,64-16,52
-	xor	r28,r5,r0		/* hash */
-	b	4f
-
-3:	/* Calc vpn and put it in r29 */
-	sldi	r29,r5,SID_SHIFT_1T - VPN_SHIFT
-	rldicl  r28,r3,64 - VPN_SHIFT,64 - (SID_SHIFT_1T - VPN_SHIFT)
-	or	r29,r28,r29
-	/*
-	 * calculate hash value for primary slot and
-	 * store it in r28 for 1T segment
-	 * r3 = va, r5 = vsid
-	 */
-	sldi	r28,r5,25		/* vsid << 25 */
-	/* r0 = (va >> 16) & ((1ul << (40 - 16)) -1) */
-	rldicl	r0,r3,64-16,40
-	xor	r28,r28,r5		/* vsid ^ ( vsid << 25) */
-	xor	r28,r28,r0		/* hash */
-
-	/* Convert linux PTE bits into HW equivalents */
-4:	andi.	r3,r30,0x1fe		/* Get basic set of flags */
-	xori	r3,r3,HPTE_R_N		/* _PAGE_EXEC -> NOEXEC */
-	rlwinm	r0,r30,32-9+1,30,30	/* _PAGE_RW -> _PAGE_USER (r0) */
-	rlwinm	r4,r30,32-7+1,30,30	/* _PAGE_DIRTY -> _PAGE_USER (r4) */
-	and	r0,r0,r4		/* _PAGE_RW & _PAGE_DIRTY ->r0 bit 30*/
-	andc	r0,r30,r0		/* r0 = pte & ~r0 */
-	rlwimi	r3,r0,32-1,31,31	/* Insert result into PP lsb */
-	/*
-	 * Always add "C" bit for perf. Memory coherence is always enabled
-	 */
-	ori	r3,r3,HPTE_R_C | HPTE_R_M
-
-	/* We eventually do the icache sync here (maybe inline that
-	 * code rather than call a C function...)
-	 */
-BEGIN_FTR_SECTION
-	mr	r4,r30
-	mr	r5,r7
-	bl	hash_page_do_lazy_icache
-END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
-
-	/* At this point, r3 contains new PP bits, save them in
-	 * place of "access" in the param area (sic)
-	 */
-	std	r3,STK_PARAM(R4)(r1)
-
-	/* Get htab_hash_mask */
-	ld	r4,htab_hash_mask@got(2)
-	ld	r27,0(r4)	/* htab_hash_mask -> r27 */
-
-	/* Check if we may already be in the hashtable, in this case, we
-	 * go to out-of-line code to try to modify the HPTE
-	 */
-	rldicl.	r0,r31,64-12,48
-	bne	ht64_modify_pte
-
-ht64_insert_pte:
-	/* Clear hpte bits in new pte (we also clear BUSY btw) and
-	 * add _PAGE_HPTE_SUB0
-	 */
-	lis	r0,_PAGE_HPTEFLAGS@h
-	ori	r0,r0,_PAGE_HPTEFLAGS@l
-	andc	r30,r30,r0
-#ifdef CONFIG_PPC_64K_PAGES
-	oris	r30,r30,_PAGE_HPTE_SUB0@h
-#else
-	ori	r30,r30,_PAGE_HASHPTE
-#endif
-	/* Phyical address in r5 */
-	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
-	sldi	r5,r5,PAGE_SHIFT
-
-	/* Calculate primary group hash */
-	and	r0,r28,r27
-	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
-
-	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve vpn */
-	li	r7,0			/* !bolted, !secondary */
-	li	r8,MMU_PAGE_64K
-	li	r9,MMU_PAGE_64K		/* actual page size */
-	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-.globl ht64_call_hpte_insert1
-ht64_call_hpte_insert1:
-	bl	.			/* patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge	ht64_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	ht64_pte_insert_failure
-
-	/* Now try secondary slot */
-
-	/* Phyical address in r5 */
-	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
-	sldi	r5,r5,PAGE_SHIFT
-
-	/* Calculate secondary group hash */
-	andc	r0,r27,r28
-	rldicr	r3,r0,3,63-3	/* r0 = (~hash & mask) << 3 */
-
-	/* Call ppc_md.hpte_insert */
-	ld	r6,STK_PARAM(R4)(r1)	/* Retrieve new pp bits */
-	mr	r4,r29			/* Retrieve vpn */
-	li	r7,HPTE_V_SECONDARY	/* !bolted, secondary */
-	li	r8,MMU_PAGE_64K
-	li	r9,MMU_PAGE_64K		/* actual page size */
-	ld	r10,STK_PARAM(R9)(r1)	/* segment size */
-.globl ht64_call_hpte_insert2
-ht64_call_hpte_insert2:
-	bl	.			/* patched by htab_finish_init() */
-	cmpdi	0,r3,0
-	bge+	ht64_pte_insert_ok	/* Insertion successful */
-	cmpdi	0,r3,-2			/* Critical failure */
-	beq-	ht64_pte_insert_failure
-
-	/* Both are full, we need to evict something */
-	mftb	r0
-	/* Pick a random group based on TB */
-	andi.	r0,r0,1
-	mr	r5,r28
-	bne	2f
-	not	r5,r5
-2:	and	r0,r5,r27
-	rldicr	r3,r0,3,63-3	/* r0 = (hash & mask) << 3 */
-	/* Call ppc_md.hpte_remove */
-.globl ht64_call_hpte_remove
-ht64_call_hpte_remove:
-	bl	.			/* patched by htab_finish_init() */
-
-	/* Try all again */
-	b	ht64_insert_pte
-
-ht64_bail_ok:
-	li	r3,0
-	b	ht64_bail
-
-ht64_pte_insert_ok:
-	/* Insert slot number & secondary bit in PTE */
-	rldimi	r30,r3,12,63-15
-
-	/* Write out the PTE with a normal write
-	 * (maybe add eieio may be good still ?)
-	 */
-ht64_write_out_pte:
-	ld	r6,STK_PARAM(R6)(r1)
-	std	r30,0(r6)
-	li	r3, 0
-ht64_bail:
-	ld	r27,STK_REG(R27)(r1)
-	ld	r28,STK_REG(R28)(r1)
-	ld	r29,STK_REG(R29)(r1)
-	ld      r30,STK_REG(R30)(r1)
-	ld      r31,STK_REG(R31)(r1)
-	addi    r1,r1,STACKFRAMESIZE
-	ld      r0,16(r1)
-	mtlr    r0
-	blr
-
-ht64_modify_pte:
-	/* Keep PP bits in r4 and slot idx from the PTE around in r3 */
-	mr	r4,r3
-	rlwinm	r3,r31,32-12,29,31
-
-	/* Secondary group ? if yes, get a inverted hash value */
-	mr	r5,r28
-	andi.	r0,r31,_PAGE_F_SECOND
-	beq	1f
-	not	r5,r5
-1:
-	/* Calculate proper slot value for ppc_md.hpte_updatepp */
-	and	r0,r5,r27
-	rldicr	r0,r0,3,63-3	/* r0 = (hash & mask) << 3 */
-	add	r3,r0,r3	/* add slot idx */
-
-	/* Call ppc_md.hpte_updatepp */
-	mr	r5,r29			/* vpn */
-	li	r6,MMU_PAGE_64K		/* base page size */
-	li	r7,MMU_PAGE_64K		/* actual page size */
-	ld	r8,STK_PARAM(R9)(r1)	/* segment size */
-	ld	r9,STK_PARAM(R8)(r1)	/* get "flags" param */
-.globl ht64_call_hpte_updatepp
-ht64_call_hpte_updatepp:
-	bl	.			/* patched by htab_finish_init() */
-
-	/* if we failed because typically the HPTE wasn't really here
-	 * we try an insertion.
-	 */
-	cmpdi	0,r3,-1
-	beq-	ht64_insert_pte
-
-	/* Clear the BUSY bit and Write out the PTE */
-	li	r0,_PAGE_BUSY
-	andc	r30,r30,r0
-	b	ht64_write_out_pte
-
-ht64_wrong_access:
-	/* Bail out clearing reservation */
-	stdcx.	r31,0,r6
-	li	r3,1
-	b	ht64_bail
-
-ht64_pte_insert_failure:
-	/* Bail out restoring old PTE */
-	ld	r6,STK_PARAM(R6)(r1)
-	std	r31,0(r6)
-	li	r3,-1
-	b	ht64_bail
-
-
-#endif /* CONFIG_PPC_64K_PAGES */
-
-
-/*****************************************************************************
- *                                                                           *
- *           Huge pages implementation is in hugetlbpage.c                   *
- *                                                                           *
- *****************************************************************************/
diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c
index c8822af10a58..8eaac81347fd 100644
--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -429,6 +429,7 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn,
 	local_irq_restore(flags);
 }
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 static void native_hugepage_invalidate(unsigned long vsid,
 				       unsigned long addr,
 				       unsigned char *hpte_slot_array,
@@ -482,6 +483,15 @@ static void native_hugepage_invalidate(unsigned long vsid,
 	}
 	local_irq_restore(flags);
 }
+#else
+static void native_hugepage_invalidate(unsigned long vsid,
+				       unsigned long addr,
+				       unsigned char *hpte_slot_array,
+				       int psize, int ssize, int local)
+{
+	WARN(1, "%s called without THP support\n", __func__);
+}
+#endif
 
 static inline int __hpte_actual_psize(unsigned int lp, int psize)
 {
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 7f9616f7c479..7635b1c6b5da 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -159,24 +159,41 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	},
 };
 
-static unsigned long htab_convert_pte_flags(unsigned long pteflags)
+unsigned long htab_convert_pte_flags(unsigned long pteflags)
 {
-	unsigned long rflags = pteflags & 0x1fa;
+	unsigned long rflags = 0;
 
 	/* _PAGE_EXEC -> NOEXEC */
 	if ((pteflags & _PAGE_EXEC) == 0)
 		rflags |= HPTE_R_N;
-
-	/* PP bits. PAGE_USER is already PP bit 0x2, so we only
-	 * need to add in 0x1 if it's a read-only user page
+	/*
+	 * PP bits:
+	 * Linux uses slb key 0 for kernel and 1 for user.
+	 * kernel areas are mapped with PP=00
+	 * and there is no kernel RO (_PAGE_KERNEL_RO).
+	 * User area is mapped with PP=0x2 for read/write
+	 * or PP=0x3 for read-only (including writeable but clean pages).
 	 */
-	if ((pteflags & _PAGE_USER) && !((pteflags & _PAGE_RW) &&
-					 (pteflags & _PAGE_DIRTY)))
-		rflags |= 1;
+	if (pteflags & _PAGE_USER) {
+		rflags |= 0x2;
+		if (!((pteflags & _PAGE_RW) && (pteflags & _PAGE_DIRTY)))
+			rflags |= 0x1;
+	}
 	/*
 	 * Always add "C" bit for perf. Memory coherence is always enabled
 	 */
-	return rflags | HPTE_R_C | HPTE_R_M;
+	rflags |=  HPTE_R_C | HPTE_R_M;
+	/*
+	 * Add in WIG bits
+	 */
+	if (pteflags & _PAGE_WRITETHRU)
+		rflags |= HPTE_R_W;
+	if (pteflags & _PAGE_NO_CACHE)
+		rflags |= HPTE_R_I;
+	if (pteflags & _PAGE_GUARDED)
+		rflags |= HPTE_R_G;
+
+	return rflags;
 }
 
 int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
@@ -238,36 +255,42 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 
 		if (ret < 0)
 			break;
+
 #ifdef CONFIG_DEBUG_PAGEALLOC
-		if ((paddr >> PAGE_SHIFT) < linear_map_hash_count)
+		if (debug_pagealloc_enabled() &&
+			(paddr >> PAGE_SHIFT) < linear_map_hash_count)
 			linear_map_hash_slots[paddr >> PAGE_SHIFT] = ret | 0x80;
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 	}
 	return ret < 0 ? ret : 0;
 }
 
-#ifdef CONFIG_MEMORY_HOTPLUG
 int htab_remove_mapping(unsigned long vstart, unsigned long vend,
 		      int psize, int ssize)
 {
 	unsigned long vaddr;
 	unsigned int step, shift;
+	int rc;
+	int ret = 0;
 
 	shift = mmu_psize_defs[psize].shift;
 	step = 1 << shift;
 
-	if (!ppc_md.hpte_removebolted) {
-		printk(KERN_WARNING "Platform doesn't implement "
-				"hpte_removebolted\n");
-		return -EINVAL;
-	}
+	if (!ppc_md.hpte_removebolted)
+		return -ENODEV;
 
-	for (vaddr = vstart; vaddr < vend; vaddr += step)
-		ppc_md.hpte_removebolted(vaddr, psize, ssize);
+	for (vaddr = vstart; vaddr < vend; vaddr += step) {
+		rc = ppc_md.hpte_removebolted(vaddr, psize, ssize);
+		if (rc == -ENOENT) {
+			ret = -ENOENT;
+			continue;
+		}
+		if (rc < 0)
+			return rc;
+	}
 
-	return 0;
+	return ret;
 }
-#endif /* CONFIG_MEMORY_HOTPLUG */
 
 static int __init htab_dt_scan_seg_sizes(unsigned long node,
 					 const char *uname, int depth,
@@ -495,17 +518,17 @@ static void __init htab_init_page_sizes(void)
 	if (mmu_has_feature(MMU_FTR_16M_PAGE))
 		memcpy(mmu_psize_defs, mmu_psize_defaults_gp,
 		       sizeof(mmu_psize_defaults_gp));
- found:
-#ifndef CONFIG_DEBUG_PAGEALLOC
-	/*
-	 * Pick a size for the linear mapping. Currently, we only support
-	 * 16M, 1M and 4K which is the default
-	 */
-	if (mmu_psize_defs[MMU_PAGE_16M].shift)
-		mmu_linear_psize = MMU_PAGE_16M;
-	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-		mmu_linear_psize = MMU_PAGE_1M;
-#endif /* CONFIG_DEBUG_PAGEALLOC */
+found:
+	if (!debug_pagealloc_enabled()) {
+		/*
+		 * Pick a size for the linear mapping. Currently, we only
+		 * support 16M, 1M and 4K which is the default
+		 */
+		if (mmu_psize_defs[MMU_PAGE_16M].shift)
+			mmu_linear_psize = MMU_PAGE_16M;
+		else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+			mmu_linear_psize = MMU_PAGE_1M;
+	}
 
 #ifdef CONFIG_PPC_64K_PAGES
 	/*
@@ -588,10 +611,28 @@ static int __init htab_dt_scan_pftsize(unsigned long node,
 	return 0;
 }
 
-static unsigned long __init htab_get_table_size(void)
+unsigned htab_shift_for_mem_size(unsigned long mem_size)
 {
-	unsigned long mem_size, rnd_mem_size, pteg_count, psize;
+	unsigned memshift = __ilog2(mem_size);
+	unsigned pshift = mmu_psize_defs[mmu_virtual_psize].shift;
+	unsigned pteg_shift;
+
+	/* round mem_size up to next power of 2 */
+	if ((1UL << memshift) < mem_size)
+		memshift += 1;
+
+	/* aim for 2 pages / pteg */
+	pteg_shift = memshift - (pshift + 1);
 
+	/*
+	 * 2^11 PTEGS of 128 bytes each, ie. 2^18 bytes is the minimum htab
+	 * size permitted by the architecture.
+	 */
+	return max(pteg_shift + 7, 18U);
+}
+
+static unsigned long __init htab_get_table_size(void)
+{
 	/* If hash size isn't already provided by the platform, we try to
 	 * retrieve it from the device-tree. If it's not there neither, we
 	 * calculate it now based on the total RAM size
@@ -601,74 +642,33 @@ static unsigned long __init htab_get_table_size(void)
 	if (ppc64_pft_size)
 		return 1UL << ppc64_pft_size;
 
-	/* round mem_size up to next power of 2 */
-	mem_size = memblock_phys_mem_size();
-	rnd_mem_size = 1UL << __ilog2(mem_size);
-	if (rnd_mem_size < mem_size)
-		rnd_mem_size <<= 1;
-
-	/* # pages / 2 */
-	psize = mmu_psize_defs[mmu_virtual_psize].shift;
-	pteg_count = max(rnd_mem_size >> (psize + 1), 1UL << 11);
-
-	return pteg_count << 7;
+	return 1UL << htab_shift_for_mem_size(memblock_phys_mem_size());
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 int create_section_mapping(unsigned long start, unsigned long end)
 {
-	return htab_bolt_mapping(start, end, __pa(start),
-				 pgprot_val(PAGE_KERNEL), mmu_linear_psize,
-				 mmu_kernel_ssize);
+	int rc = htab_bolt_mapping(start, end, __pa(start),
+				   pgprot_val(PAGE_KERNEL), mmu_linear_psize,
+				   mmu_kernel_ssize);
+
+	if (rc < 0) {
+		int rc2 = htab_remove_mapping(start, end, mmu_linear_psize,
+					      mmu_kernel_ssize);
+		BUG_ON(rc2 && (rc2 != -ENOENT));
+	}
+	return rc;
 }
 
 int remove_section_mapping(unsigned long start, unsigned long end)
 {
-	return htab_remove_mapping(start, end, mmu_linear_psize,
-			mmu_kernel_ssize);
+	int rc = htab_remove_mapping(start, end, mmu_linear_psize,
+				     mmu_kernel_ssize);
+	WARN_ON(rc < 0);
+	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
-extern u32 htab_call_hpte_insert1[];
-extern u32 htab_call_hpte_insert2[];
-extern u32 htab_call_hpte_remove[];
-extern u32 htab_call_hpte_updatepp[];
-extern u32 ht64_call_hpte_insert1[];
-extern u32 ht64_call_hpte_insert2[];
-extern u32 ht64_call_hpte_remove[];
-extern u32 ht64_call_hpte_updatepp[];
-
-static void __init htab_finish_init(void)
-{
-#ifdef CONFIG_PPC_64K_PAGES
-	patch_branch(ht64_call_hpte_insert1,
-		ppc_function_entry(ppc_md.hpte_insert),
-		BRANCH_SET_LINK);
-	patch_branch(ht64_call_hpte_insert2,
-		ppc_function_entry(ppc_md.hpte_insert),
-		BRANCH_SET_LINK);
-	patch_branch(ht64_call_hpte_remove,
-		ppc_function_entry(ppc_md.hpte_remove),
-		BRANCH_SET_LINK);
-	patch_branch(ht64_call_hpte_updatepp,
-		ppc_function_entry(ppc_md.hpte_updatepp),
-		BRANCH_SET_LINK);
-#endif /* CONFIG_PPC_64K_PAGES */
-
-	patch_branch(htab_call_hpte_insert1,
-		ppc_function_entry(ppc_md.hpte_insert),
-		BRANCH_SET_LINK);
-	patch_branch(htab_call_hpte_insert2,
-		ppc_function_entry(ppc_md.hpte_insert),
-		BRANCH_SET_LINK);
-	patch_branch(htab_call_hpte_remove,
-		ppc_function_entry(ppc_md.hpte_remove),
-		BRANCH_SET_LINK);
-	patch_branch(htab_call_hpte_updatepp,
-		ppc_function_entry(ppc_md.hpte_updatepp),
-		BRANCH_SET_LINK);
-}
-
 static void __init htab_initialize(void)
 {
 	unsigned long table;
@@ -744,10 +744,12 @@ static void __init htab_initialize(void)
 	prot = pgprot_val(PAGE_KERNEL);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
-	linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
-	linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
-						    1, ppc64_rma_size));
-	memset(linear_map_hash_slots, 0, linear_map_hash_count);
+	if (debug_pagealloc_enabled()) {
+		linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
+		linear_map_hash_slots = __va(memblock_alloc_base(
+				linear_map_hash_count, 1, ppc64_rma_size));
+		memset(linear_map_hash_slots, 0, linear_map_hash_count);
+	}
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
 	/* On U3 based machines, we need to reserve the DART area and
@@ -815,7 +817,6 @@ static void __init htab_initialize(void)
 					 mmu_linear_psize, mmu_kernel_ssize));
 	}
 
-	htab_finish_init();
 
 	DBG(" <- htab_initialize()\n");
 }
@@ -877,11 +878,11 @@ static unsigned int get_paca_psize(unsigned long addr)
 	unsigned long index, mask_index;
 
 	if (addr < SLICE_LOW_TOP) {
-		lpsizes = get_paca()->context.low_slices_psize;
+		lpsizes = get_paca()->mm_ctx_low_slices_psize;
 		index = GET_LOW_SLICE_INDEX(addr);
 		return (lpsizes >> (index * 4)) & 0xF;
 	}
-	hpsizes = get_paca()->context.high_slices_psize;
+	hpsizes = get_paca()->mm_ctx_high_slices_psize;
 	index = GET_HIGH_SLICE_INDEX(addr);
 	mask_index = index & 0x1;
 	return (hpsizes[index >> 1] >> (mask_index * 4)) & 0xF;
@@ -890,7 +891,7 @@ static unsigned int get_paca_psize(unsigned long addr)
 #else
 unsigned int get_paca_psize(unsigned long addr)
 {
-	return get_paca()->context.user_psize;
+	return get_paca()->mm_ctx_user_psize;
 }
 #endif
 
@@ -906,7 +907,8 @@ void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
 	slice_set_range_psize(mm, addr, 1, MMU_PAGE_4K);
 	copro_flush_all_slbs(mm);
 	if ((get_paca_psize(addr) != MMU_PAGE_4K) && (current->mm == mm)) {
-		get_paca()->context = mm->context;
+
+		copy_mm_to_paca(&mm->context);
 		slb_flush_and_rebolt();
 	}
 }
@@ -973,7 +975,7 @@ static void check_paca_psize(unsigned long ea, struct mm_struct *mm,
 {
 	if (user_region) {
 		if (psize != get_paca_psize(ea)) {
-			get_paca()->context = mm->context;
+			copy_mm_to_paca(&mm->context);
 			slb_flush_and_rebolt();
 		}
 	} else if (get_paca()->vmalloc_sllp !=
@@ -1148,9 +1150,10 @@ int hash_page_mm(struct mm_struct *mm, unsigned long ea,
 		}
 	}
 
+#endif /* CONFIG_PPC_64K_PAGES */
+
 	if (current->mm == mm)
 		check_paca_psize(ea, mm, psize, user_region);
-#endif /* CONFIG_PPC_64K_PAGES */
 
 #ifdef CONFIG_PPC_64K_PAGES
 	if (psize == MMU_PAGE_64K)
@@ -1203,6 +1206,35 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap,
 }
 EXPORT_SYMBOL_GPL(hash_page);
 
+int __hash_page(unsigned long ea, unsigned long msr, unsigned long trap,
+		unsigned long dsisr)
+{
+	unsigned long access = _PAGE_PRESENT;
+	unsigned long flags = 0;
+	struct mm_struct *mm = current->mm;
+
+	if (REGION_ID(ea) == VMALLOC_REGION_ID)
+		mm = &init_mm;
+
+	if (dsisr & DSISR_NOHPTE)
+		flags |= HPTE_NOHPTE_UPDATE;
+
+	if (dsisr & DSISR_ISSTORE)
+		access |= _PAGE_RW;
+	/*
+	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
+	 * accessing a userspace segment (even from the kernel). We assume
+	 * kernel addresses always have the high bit set.
+	 */
+	if ((msr & MSR_PR) || (REGION_ID(ea) == USER_REGION_ID))
+		access |= _PAGE_USER;
+
+	if (trap == 0x400)
+		access |= _PAGE_EXEC;
+
+	return hash_page_mm(mm, ea, access, trap, flags);
+}
+
 void hash_preload(struct mm_struct *mm, unsigned long ea,
 		  unsigned long access, unsigned long trap)
 {
diff --git a/arch/powerpc/mm/hugepage-hash64.c b/arch/powerpc/mm/hugepage-hash64.c
index 4d87122cf6a7..eb2accdd76fd 100644
--- a/arch/powerpc/mm/hugepage-hash64.c
+++ b/arch/powerpc/mm/hugepage-hash64.c
@@ -39,9 +39,6 @@ int __hash_page_thp(unsigned long ea, unsigned long access, unsigned long vsid,
 		/* If PMD busy, retry the access */
 		if (unlikely(old_pmd & _PAGE_BUSY))
 			return 0;
-		/* If PMD is trans splitting retry the access */
-		if (unlikely(old_pmd & _PAGE_SPLITTING))
-			return 0;
 		/* If PMD permissions don't match, take page fault */
 		if (unlikely(access & ~old_pmd))
 			return 1;
@@ -54,18 +51,7 @@ int __hash_page_thp(unsigned long ea, unsigned long access, unsigned long vsid,
 			new_pmd |= _PAGE_DIRTY;
 	} while (old_pmd != __cmpxchg_u64((unsigned long *)pmdp,
 					  old_pmd, new_pmd));
-	/*
-	 * PP bits. _PAGE_USER is already PP bit 0x2, so we only
-	 * need to add in 0x1 if it's a read-only user page
-	 */
-	rflags = new_pmd & _PAGE_USER;
-	if ((new_pmd & _PAGE_USER) && !((new_pmd & _PAGE_RW) &&
-					   (new_pmd & _PAGE_DIRTY)))
-		rflags |= 0x1;
-	/*
-	 * _PAGE_EXEC -> HW_NO_EXEC since it's inverted
-	 */
-	rflags |= ((new_pmd & _PAGE_EXEC) ? 0 : HPTE_R_N);
+	rflags = htab_convert_pte_flags(new_pmd);
 
 #if 0
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) {
@@ -82,7 +68,7 @@ int __hash_page_thp(unsigned long ea, unsigned long access, unsigned long vsid,
 	 */
 	shift = mmu_psize_defs[psize].shift;
 	index = (ea & ~HPAGE_PMD_MASK) >> shift;
-	BUG_ON(index >= 4096);
+	BUG_ON(index >= PTE_FRAG_SIZE);
 
 	vpn = hpt_vpn(ea, vsid, ssize);
 	hpte_slot_array = get_hpte_slot_array(pmdp);
@@ -92,9 +78,19 @@ int __hash_page_thp(unsigned long ea, unsigned long access, unsigned long vsid,
 		 * base page size. This is because demote_segment won't flush
 		 * hash page table entries.
 		 */
-		if ((old_pmd & _PAGE_HASHPTE) && !(old_pmd & _PAGE_COMBO))
+		if ((old_pmd & _PAGE_HASHPTE) && !(old_pmd & _PAGE_COMBO)) {
 			flush_hash_hugepage(vsid, ea, pmdp, MMU_PAGE_64K,
 					    ssize, flags);
+			/*
+			 * With THP, we also clear the slot information with
+			 * respect to all the 64K hash pte mapping the 16MB
+			 * page. They are all invalid now. This make sure we
+			 * don't find the slot valid when we fault with 4k
+			 * base page size.
+			 *
+			 */
+			memset(hpte_slot_array, 0, PTE_FRAG_SIZE);
+		}
 	}
 
 	valid = hpte_valid(hpte_slot_array, index);
@@ -131,13 +127,6 @@ int __hash_page_thp(unsigned long ea, unsigned long access, unsigned long vsid,
 		pa = pmd_pfn(__pmd(old_pmd)) << PAGE_SHIFT;
 		new_pmd |= _PAGE_HASHPTE;
 
-		/* Add in WIMG bits */
-		rflags |= (new_pmd & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
-				      _PAGE_GUARDED));
-		/*
-		 * enable the memory coherence always
-		 */
-		rflags |= HPTE_R_M;
 repeat:
 		hpte_group = ((hash & htab_hash_mask) * HPTES_PER_GROUP) & ~0x7UL;
 
diff --git a/arch/powerpc/mm/hugetlbpage-book3e.c b/arch/powerpc/mm/hugetlbpage-book3e.c
index ba47aaf33a4b..83a8be791e06 100644
--- a/arch/powerpc/mm/hugetlbpage-book3e.c
+++ b/arch/powerpc/mm/hugetlbpage-book3e.c
@@ -8,6 +8,8 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 
+#include <asm/mmu.h>
+
 #ifdef CONFIG_PPC_FSL_BOOK3E
 #ifdef CONFIG_PPC64
 static inline int tlb1_next(void)
@@ -51,6 +53,59 @@ static inline int mmu_get_tsize(int psize)
 	return mmu_psize_defs[psize].enc;
 }
 
+#if defined(CONFIG_PPC_FSL_BOOK3E) && defined(CONFIG_PPC64)
+#include <asm/paca.h>
+
+static inline void book3e_tlb_lock(void)
+{
+	struct paca_struct *paca = get_paca();
+	unsigned long tmp;
+	int token = smp_processor_id() + 1;
+
+	/*
+	 * Besides being unnecessary in the absence of SMT, this
+	 * check prevents trying to do lbarx/stbcx. on e5500 which
+	 * doesn't implement either feature.
+	 */
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return;
+
+	asm volatile("1: lbarx %0, 0, %1;"
+		     "cmpwi %0, 0;"
+		     "bne 2f;"
+		     "stbcx. %2, 0, %1;"
+		     "bne 1b;"
+		     "b 3f;"
+		     "2: lbzx %0, 0, %1;"
+		     "cmpwi %0, 0;"
+		     "bne 2b;"
+		     "b 1b;"
+		     "3:"
+		     : "=&r" (tmp)
+		     : "r" (&paca->tcd_ptr->lock), "r" (token)
+		     : "memory");
+}
+
+static inline void book3e_tlb_unlock(void)
+{
+	struct paca_struct *paca = get_paca();
+
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return;
+
+	isync();
+	paca->tcd_ptr->lock = 0;
+}
+#else
+static inline void book3e_tlb_lock(void)
+{
+}
+
+static inline void book3e_tlb_unlock(void)
+{
+}
+#endif
+
 static inline int book3e_tlb_exists(unsigned long ea, unsigned long pid)
 {
 	int found = 0;
@@ -109,7 +164,10 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
 	 */
 	local_irq_save(flags);
 
+	book3e_tlb_lock();
+
 	if (unlikely(book3e_tlb_exists(ea, mm->context.id))) {
+		book3e_tlb_unlock();
 		local_irq_restore(flags);
 		return;
 	}
@@ -141,6 +199,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
 
 	asm volatile ("tlbwe");
 
+	book3e_tlb_unlock();
 	local_irq_restore(flags);
 }
 
diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c
index d94b1af53a93..8555fce902fe 100644
--- a/arch/powerpc/mm/hugetlbpage-hash64.c
+++ b/arch/powerpc/mm/hugetlbpage-hash64.c
@@ -59,10 +59,8 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 			new_pte |= _PAGE_DIRTY;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
+	rflags = htab_convert_pte_flags(new_pte);
 
-	rflags = 0x2 | (!(new_pte & _PAGE_RW));
-	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
-	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
 	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
 		/* No CPU has hugepages but lacks no execute, so we
@@ -78,7 +76,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		if (old_pte & _PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-		slot += (old_pte & _PAGE_F_GIX) >> 12;
+		slot += (old_pte & _PAGE_F_GIX) >> _PAGE_F_GIX_SHIFT;
 
 		if (ppc_md.hpte_updatepp(slot, rflags, vpn, mmu_psize,
 					 mmu_psize, ssize, flags) == -1)
@@ -91,18 +89,7 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
 
 		/* clear HPTE slot informations in new PTE */
-#ifdef CONFIG_PPC_64K_PAGES
-		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
-#else
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-#endif
-		/* Add in WIMG bits */
-		rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
-				      _PAGE_COHERENT | _PAGE_GUARDED));
-		/*
-		 * enable the memory coherence always
-		 */
-		rflags |= HPTE_R_M;
 
 		slot = hpte_insert_repeating(hash, vpn, pa, rflags, 0,
 					     mmu_psize, ssize);
@@ -118,7 +105,8 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 			return -1;
 		}
 
-		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
+		new_pte |= (slot << _PAGE_F_GIX_SHIFT) &
+			(_PAGE_F_SECOND | _PAGE_F_GIX);
 	}
 
 	/*
@@ -127,3 +115,21 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	*ptep = __pte(new_pte & ~_PAGE_BUSY);
 	return 0;
 }
+
+#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_DEBUG_VM)
+/*
+ * This enables us to catch the wrong page directory format
+ * Moved here so that we can use WARN() in the call.
+ */
+int hugepd_ok(hugepd_t hpd)
+{
+	bool is_hugepd;
+
+	/*
+	 * We should not find this format in page directory, warn otherwise.
+	 */
+	is_hugepd = (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
+	WARN(is_hugepd, "Found wrong page directory format\n");
+	return 0;
+}
+#endif
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9833fee493ec..d991b9e80dbb 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -53,78 +53,6 @@ static unsigned nr_gpages;
 
 #define hugepd_none(hpd)	((hpd).pd == 0)
 
-#ifdef CONFIG_PPC_BOOK3S_64
-/*
- * At this point we do the placement change only for BOOK3S 64. This would
- * possibly work on other subarchs.
- */
-
-/*
- * We have PGD_INDEX_SIZ = 12 and PTE_INDEX_SIZE = 8, so that we can have
- * 16GB hugepage pte in PGD and 16MB hugepage pte at PMD;
- *
- * Defined in such a way that we can optimize away code block at build time
- * if CONFIG_HUGETLB_PAGE=n.
- */
-int pmd_huge(pmd_t pmd)
-{
-	/*
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	return ((pmd_val(pmd) & 0x3) != 0x0);
-}
-
-int pud_huge(pud_t pud)
-{
-	/*
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	return ((pud_val(pud) & 0x3) != 0x0);
-}
-
-int pgd_huge(pgd_t pgd)
-{
-	/*
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	return ((pgd_val(pgd) & 0x3) != 0x0);
-}
-
-#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_DEBUG_VM)
-/*
- * This enables us to catch the wrong page directory format
- * Moved here so that we can use WARN() in the call.
- */
-int hugepd_ok(hugepd_t hpd)
-{
-	bool is_hugepd;
-
-	/*
-	 * We should not find this format in page directory, warn otherwise.
-	 */
-	is_hugepd = (((hpd.pd & 0x3) == 0x0) && ((hpd.pd & HUGEPD_SHIFT_MASK) != 0));
-	WARN(is_hugepd, "Found wrong page directory format\n");
-	return 0;
-}
-#endif
-
-#else
-int pmd_huge(pmd_t pmd)
-{
-	return 0;
-}
-
-int pud_huge(pud_t pud)
-{
-	return 0;
-}
-
-int pgd_huge(pgd_t pgd)
-{
-	return 0;
-}
-#endif
-
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
 	/* Only called for hugetlbfs pages, hence can ignore THP */
@@ -179,8 +107,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 		kmem_cache_free(cachep, new);
 	else {
 #ifdef CONFIG_PPC_BOOK3S_64
-		hpdp->pd = (unsigned long)new |
-			    (shift_to_mmu_psize(pshift) << 2);
+		hpdp->pd = __pa(new) | (shift_to_mmu_psize(pshift) << 2);
 #else
 		hpdp->pd = ((unsigned long)new & ~PD_HUGE) | pshift;
 #endif
@@ -486,13 +413,13 @@ static void hugepd_free(struct mmu_gather *tlb, void *hugepte)
 {
 	struct hugepd_freelist **batchp;
 
-	batchp = this_cpu_ptr(&hugepd_freelist_cur);
+	batchp = &get_cpu_var(hugepd_freelist_cur);
 
 	if (atomic_read(&tlb->mm->mm_users) < 2 ||
 	    cpumask_equal(mm_cpumask(tlb->mm),
 			  cpumask_of(smp_processor_id()))) {
 		kmem_cache_free(hugepte_cache, hugepte);
-        put_cpu_var(hugepd_freelist_cur);
+		put_cpu_var(hugepd_freelist_cur);
 		return;
 	}
 
@@ -966,8 +893,8 @@ void flush_dcache_icache_hugepage(struct page *page)
  * We have 4 cases for pgds and pmds:
  * (1) invalid (all zeroes)
  * (2) pointer to next table, as normal; bottom 6 bits == 0
- * (3) leaf pte for huge page, bottom two bits != 00
- * (4) hugepd pointer, bottom two bits == 00, next 4 bits indicate size of table
+ * (3) leaf pte for huge page _PAGE_PTE set
+ * (4) hugepd pointer, _PAGE_PTE = 0 and bits [2..6] indicate size of table
  *
  * So long as we atomically load page table pointers we are safe against teardown,
  * we can follow the address down to the the page and take a ref on it.
@@ -1030,10 +957,6 @@ pte_t *__find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
 			/*
 			 * A hugepage collapse is captured by pmd_none, because
 			 * it mark the pmd none and do a hpte invalidate.
-			 *
-			 * We don't worry about pmd_trans_splitting here, The
-			 * caller if it needs to handle the splitting case
-			 * should check for that.
 			 */
 			if (pmd_none(pmd))
 				return NULL;
@@ -1071,7 +994,7 @@ int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
 {
 	unsigned long mask;
 	unsigned long pte_end;
-	struct page *head, *page, *tail;
+	struct page *head, *page;
 	pte_t pte;
 	int refs;
 
@@ -1094,7 +1017,6 @@ int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
 	head = pte_page(pte);
 
 	page = head + ((addr & (sz-1)) >> PAGE_SHIFT);
-	tail = page;
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
@@ -1116,15 +1038,5 @@ int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
 		return 0;
 	}
 
-	/*
-	 * Any tail page need their mapcount reference taken before we
-	 * return.
-	 */
-	while (refs--) {
-		if (PageTail(tail))
-			get_huge_page_tail(tail);
-		tail++;
-	}
-
 	return 1;
 }
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index a10be665b645..c899fe340bbd 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -112,10 +112,10 @@ void __init MMU_setup(void)
 	if (strstr(boot_command_line, "noltlbs")) {
 		__map_without_ltlbs = 1;
 	}
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	__map_without_bats = 1;
-	__map_without_ltlbs = 1;
-#endif
+	if (debug_pagealloc_enabled()) {
+		__map_without_bats = 1;
+		__map_without_ltlbs = 1;
+	}
 }
 
 /*
@@ -178,10 +178,6 @@ void __init MMU_init(void)
 	/* Initialize early top-down ioremap allocator */
 	ioremap_bot = IOREMAP_TOP;
 
-	/* Map in I/O resources */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:setio", 0x302);
-
 	if (ppc_md.progress)
 		ppc_md.progress("MMU:exit", 0x211);
 
@@ -193,22 +189,3 @@ void __init MMU_init(void)
 	/* Shortly after that, the entire linear mapping will be available */
 	memblock_set_current_limit(lowmem_end_addr);
 }
-
-#ifdef CONFIG_8xx /* No 8xx specific .c file to put that in ... */
-void setup_initial_memory_limit(phys_addr_t first_memblock_base,
-				phys_addr_t first_memblock_size)
-{
-	/* We don't currently support the first MEMBLOCK not mapping 0
-	 * physical on those processors
-	 */
-	BUG_ON(first_memblock_base != 0);
-
-#ifdef CONFIG_PIN_TLB
-	/* 8xx can only access 24MB at the moment */
-	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
-#else
-	/* 8xx can only access 8MB at the moment */
-	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
-#endif
-}
-#endif /* CONFIG_8xx */
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index d747dd7bc90b..ba655666186d 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -85,13 +85,14 @@ static void pgd_ctor(void *addr)
 	memset(addr, 0, PGD_TABLE_SIZE);
 }
 
+static void pud_ctor(void *addr)
+{
+	memset(addr, 0, PUD_TABLE_SIZE);
+}
+
 static void pmd_ctor(void *addr)
 {
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-	memset(addr, 0, PMD_TABLE_SIZE * 2);
-#else
 	memset(addr, 0, PMD_TABLE_SIZE);
-#endif
 }
 
 struct kmem_cache *pgtable_cache[MAX_PGTABLE_INDEX_SIZE];
@@ -142,14 +143,18 @@ void pgtable_cache_init(void)
 {
 	pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor);
 	pgtable_cache_add(PMD_CACHE_INDEX, pmd_ctor);
+	/*
+	 * In all current configs, when the PUD index exists it's the
+	 * same size as either the pgd or pmd index except with THP enabled
+	 * on book3s 64
+	 */
+	if (PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE))
+		pgtable_cache_add(PUD_INDEX_SIZE, pud_ctor);
+
 	if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_CACHE_INDEX))
 		panic("Couldn't allocate pgtable caches");
-	/* In all current configs, when the PUD index exists it's the
-	 * same size as either the pgd or pmd index.  Verify that the
-	 * initialization above has also created a PUD cache.  This
-	 * will need re-examiniation if we add new possibilities for
-	 * the pagetable layout. */
-	BUG_ON(PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE));
+	if (PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE))
+		panic("Couldn't allocate pud pgtable caches");
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
@@ -192,9 +197,9 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
  */
 
 #ifdef CONFIG_PPC_BOOK3E
-static void __meminit vmemmap_create_mapping(unsigned long start,
-					     unsigned long page_size,
-					     unsigned long phys)
+static int __meminit vmemmap_create_mapping(unsigned long start,
+					    unsigned long page_size,
+					    unsigned long phys)
 {
 	/* Create a PTE encoding without page size */
 	unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED |
@@ -212,6 +217,8 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
 	 */
 	for (i = 0; i < page_size; i += PAGE_SIZE)
 		BUG_ON(map_kernel_page(start + i, phys, flags));
+
+	return 0;
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
@@ -221,25 +228,31 @@ static void vmemmap_remove_mapping(unsigned long start,
 }
 #endif
 #else /* CONFIG_PPC_BOOK3E */
-static void __meminit vmemmap_create_mapping(unsigned long start,
-					     unsigned long page_size,
-					     unsigned long phys)
+static int __meminit vmemmap_create_mapping(unsigned long start,
+					    unsigned long page_size,
+					    unsigned long phys)
 {
-	int  mapped = htab_bolt_mapping(start, start + page_size, phys,
-					pgprot_val(PAGE_KERNEL),
-					mmu_vmemmap_psize,
-					mmu_kernel_ssize);
-	BUG_ON(mapped < 0);
+	int rc = htab_bolt_mapping(start, start + page_size, phys,
+				   pgprot_val(PAGE_KERNEL),
+				   mmu_vmemmap_psize, mmu_kernel_ssize);
+	if (rc < 0) {
+		int rc2 = htab_remove_mapping(start, start + page_size,
+					      mmu_vmemmap_psize,
+					      mmu_kernel_ssize);
+		BUG_ON(rc2 && (rc2 != -ENOENT));
+	}
+	return rc;
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 static void vmemmap_remove_mapping(unsigned long start,
 				   unsigned long page_size)
 {
-	int mapped = htab_remove_mapping(start, start + page_size,
-					 mmu_vmemmap_psize,
-					 mmu_kernel_ssize);
-	BUG_ON(mapped < 0);
+	int rc = htab_remove_mapping(start, start + page_size,
+				     mmu_vmemmap_psize,
+				     mmu_kernel_ssize);
+	BUG_ON((rc < 0) && (rc != -ENOENT));
+	WARN_ON(rc == -ENOENT);
 }
 #endif
 
@@ -307,6 +320,7 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
 
 	for (; start < end; start += page_size) {
 		void *p;
+		int rc;
 
 		if (vmemmap_populated(start, page_size))
 			continue;
@@ -320,7 +334,13 @@ int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
 		pr_debug("      * %016lx..%016lx allocated at %p\n",
 			 start, start + page_size, p);
 
-		vmemmap_create_mapping(start, page_size, __pa(p));
+		rc = vmemmap_create_mapping(start, page_size, __pa(p));
+		if (rc < 0) {
+			pr_warning(
+				"vmemmap_populate: Unable to create vmemmap mapping: %d\n",
+				rc);
+			return -EFAULT;
+		}
 	}
 
 	return 0;
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 22d94c3e6fc4..ac79dbde1015 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -119,12 +119,18 @@ int arch_add_memory(int nid, u64 start, u64 size, bool for_device)
 	struct zone *zone;
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
+	int rc;
 
 	pgdata = NODE_DATA(nid);
 
 	start = (unsigned long)__va(start);
-	if (create_section_mapping(start, start + size))
-		return -EINVAL;
+	rc = create_section_mapping(start, start + size);
+	if (rc) {
+		pr_warning(
+			"Unable to create mapping for hot added memory 0x%llx..0x%llx: %d\n",
+			start, start + size, rc);
+		return -EFAULT;
+	}
 
 	/* this should work for most non-highmem platforms */
 	zone = pgdata->node_zones +
@@ -541,7 +547,7 @@ static int __init add_system_ram_resources(void)
 			res->name = "System RAM";
 			res->start = base;
 			res->end = base + size - 1;
-			res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+			res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 			WARN_ON(request_resource(&iomem_resource, res) < 0);
 		}
 	}
@@ -560,12 +566,12 @@ subsys_initcall(add_system_ram_resources);
  */
 int devmem_is_allowed(unsigned long pfn)
 {
+	if (page_is_rtas_user_buf(pfn))
+		return 1;
 	if (iomem_is_exclusive(PFN_PHYS(pfn)))
 		return 0;
 	if (!page_is_ram(pfn))
 		return 1;
-	if (page_is_rtas_user_buf(pfn))
-		return 1;
 	return 0;
 }
 #endif /* CONFIG_STRICT_DEVMEM */
diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c
index 0f0502e12f6c..4087705ba90f 100644
--- a/arch/powerpc/mm/mmap.c
+++ b/arch/powerpc/mm/mmap.c
@@ -59,9 +59,9 @@ unsigned long arch_mmap_rnd(void)
 
 	/* 8MB for 32bit, 1GB for 64bit */
 	if (is_32bit_task())
-		rnd = (unsigned long)get_random_int() % (1<<(23-PAGE_SHIFT));
+		rnd = get_random_long() % (1<<(23-PAGE_SHIFT));
 	else
-		rnd = (unsigned long)get_random_int() % (1<<(30-PAGE_SHIFT));
+		rnd = get_random_long() % (1UL<<(30-PAGE_SHIFT));
 
 	return rnd << PAGE_SHIFT;
 }
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 4e4efbc2658e..9ca6fe16cb29 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -118,8 +118,7 @@ static void destroy_pagetable_page(struct mm_struct *mm)
 	/* drop all the pending references */
 	count = ((unsigned long)pte_frag & ~PAGE_MASK) >> PTE_FRAG_SIZE_SHIFT;
 	/* We allow PTE_FRAG_NR fragments from a PTE page */
-	count = atomic_sub_return(PTE_FRAG_NR - count, &page->_count);
-	if (!count) {
+	if (page_ref_sub_and_test(page, PTE_FRAG_NR - count)) {
 		pgtable_page_dtor(page);
 		free_hot_cold_page(page, 0);
 	}
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 9f58ff44a075..bfb7c0bcabd5 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -100,7 +100,6 @@ extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 
 extern int __map_without_bats;
 extern int __allow_ioremap_reserved;
-extern unsigned long ioremap_base;
 extern unsigned int rtas_data, rtas_size;
 
 struct hash_pte;
@@ -110,7 +109,8 @@ extern unsigned long Hash_size, Hash_mask;
 #endif /* CONFIG_PPC32 */
 
 #ifdef CONFIG_PPC64
-extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags);
+extern int map_kernel_page(unsigned long ea, unsigned long pa,
+			   unsigned long flags);
 #endif /* CONFIG_PPC64 */
 
 extern unsigned long ioremap_bot;
@@ -132,22 +132,17 @@ extern void wii_memory_fixups(void);
 /* ...and now those things that may be slightly different between processor
  * architectures.  -- Dan
  */
-#if defined(CONFIG_8xx)
-#define MMU_init_hw()		do { } while(0)
-#define mmu_mapin_ram(top)	(0UL)
-
-#elif defined(CONFIG_4xx)
+#ifdef CONFIG_PPC32
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
+#endif
 
-#elif defined(CONFIG_PPC_FSL_BOOK3E)
+#ifdef CONFIG_PPC_FSL_BOOK3E
 extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx,
 				     bool dryrun);
 extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 				 phys_addr_t phys);
 #ifdef CONFIG_PPC32
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void adjust_total_lowmem(void);
 extern int switch_to_as1(void);
 extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
@@ -162,8 +157,14 @@ struct tlbcam {
 	u32	MAS3;
 	u32	MAS7;
 };
-#elif defined(CONFIG_PPC32)
-/* anything 32-bit except 4xx or 8xx */
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(unsigned long top);
+#endif
+
+#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE)
+/* 6xx have BATS */
+/* FSL_BOOKE have TLBCAM */
+phys_addr_t v_block_mapped(unsigned long va);
+unsigned long p_block_mapped(phys_addr_t pa);
+#else
+static inline phys_addr_t v_block_mapped(unsigned long va) { return 0; }
+static inline unsigned long p_block_mapped(phys_addr_t pa) { return 0; }
 #endif
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 83dfcb55ffef..de37ff445362 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -179,6 +179,10 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
 	 */
 	VM_WARN_ON((pte_val(*ptep) & (_PAGE_PRESENT | _PAGE_USER)) ==
 		(_PAGE_PRESENT | _PAGE_USER));
+	/*
+	 * Add the pte bit when tryint set a pte
+	 */
+	pte = __pte(pte_val(pte) | _PAGE_PTE);
 
 	/* Note: mm->context.id might not yet have been assigned as
 	 * this context might not have been activated yet when this
@@ -239,3 +243,11 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 }
 #endif /* CONFIG_DEBUG_VM */
 
+unsigned long vmalloc_to_phys(void *va)
+{
+	unsigned long pfn = vmalloc_to_pfn(va);
+
+	BUG_ON(!pfn);
+	return __pa(pfn_to_kaddr(pfn)) + offset_in_page(va);
+}
+EXPORT_SYMBOL_GPL(vmalloc_to_phys);
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 7692d1bb1bc6..bf7bf32b54f8 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -37,35 +37,10 @@
 
 #include "mmu_decl.h"
 
-unsigned long ioremap_base;
 unsigned long ioremap_bot;
 EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
 
-#ifdef CONFIG_6xx
-#define HAVE_BATS	1
-#endif
-
-#if defined(CONFIG_FSL_BOOKE)
-#define HAVE_TLBCAM	1
-#endif
-
-extern char etext[], _stext[];
-
-#ifdef HAVE_BATS
-extern phys_addr_t v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(phys_addr_t pa);
-#else /* !HAVE_BATS */
-#define v_mapped_by_bats(x)	(0UL)
-#define p_mapped_by_bats(x)	(0UL)
-#endif /* HAVE_BATS */
-
-#ifdef HAVE_TLBCAM
-extern phys_addr_t v_mapped_by_tlbcam(unsigned long va);
-extern unsigned long p_mapped_by_tlbcam(phys_addr_t pa);
-#else /* !HAVE_TLBCAM */
-#define v_mapped_by_tlbcam(x)	(0UL)
-#define p_mapped_by_tlbcam(x)	(0UL)
-#endif /* HAVE_TLBCAM */
+extern char etext[], _stext[], _sinittext[], _einittext[];
 
 #define PGDIR_ORDER	(32 + PGD_T_LOG2 - PGDIR_SHIFT)
 
@@ -197,7 +172,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
 	/*
 	 * Choose an address to map it to.
 	 * Once the vmalloc system is running, we use it.
-	 * Before then, we use space going down from ioremap_base
+	 * Before then, we use space going down from IOREMAP_TOP
 	 * (ioremap_bot records where we're up to).
 	 */
 	p = addr & PAGE_MASK;
@@ -228,19 +203,10 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
 
 	/*
 	 * Is it already mapped?  Perhaps overlapped by a previous
-	 * BAT mapping.  If the whole area is mapped then we're done,
-	 * otherwise remap it since we want to keep the virt addrs for
-	 * each request contiguous.
-	 *
-	 * We make the assumption here that if the bottom and top
-	 * of the range we want are mapped then it's mapped to the
-	 * same virt address (and this is contiguous).
-	 *  -- Cort
+	 * mapping.
 	 */
-	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
-		goto out;
-
-	if ((v = p_mapped_by_tlbcam(p)))
+	v = p_block_mapped(p);
+	if (v)
 		goto out;
 
 	if (slab_is_available()) {
@@ -278,7 +244,8 @@ void iounmap(volatile void __iomem *addr)
 	 * If mapped by BATs then there is nothing to do.
 	 * Calling vfree() generates a benign warning.
 	 */
-	if (v_mapped_by_bats((unsigned long)addr)) return;
+	if (v_block_mapped((unsigned long)addr))
+		return;
 
 	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
 		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
@@ -322,7 +289,8 @@ void __init __mapin_ram_chunk(unsigned long offset, unsigned long top)
 	v = PAGE_OFFSET + s;
 	p = memstart_addr + s;
 	for (; s < top; s += PAGE_SIZE) {
-		ktext = ((char *) v >= _stext && (char *) v < etext);
+		ktext = ((char *)v >= _stext && (char *)v < etext) ||
+			((char *)v >= _sinittext && (char *)v < _einittext);
 		f = ktext ? pgprot_val(PAGE_KERNEL_TEXT) : pgprot_val(PAGE_KERNEL);
 		map_page(v, p, f);
 #ifdef CONFIG_PPC_STD_MMU_32
@@ -403,7 +371,7 @@ static int __change_page_attr(struct page *page, pgprot_t prot)
 	BUG_ON(PageHighMem(page));
 	address = (unsigned long)page_address(page);
 
-	if (v_mapped_by_bats(address) || v_mapped_by_tlbcam(address))
+	if (v_block_mapped(address))
 		return 0;
 	if (!get_pteptr(&init_mm, address, &kpte, &kpmd))
 		return -EINVAL;
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index e92cb2146b18..347106080bb1 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -88,7 +88,7 @@ static __ref void *early_alloc_pgtable(unsigned long size)
  * map_kernel_page adds an entry to the ioremap page table
  * and adds an entry to the HPT, possibly bolting it
  */
-int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
+int map_kernel_page(unsigned long ea, unsigned long pa, unsigned long flags)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
@@ -359,7 +359,7 @@ struct page *pud_page(pud_t pud)
 struct page *pmd_page(pmd_t pmd)
 {
 	if (pmd_trans_huge(pmd) || pmd_huge(pmd))
-		return pfn_to_page(pmd_pfn(pmd));
+		return pte_page(pmd_pte(pmd));
 	return virt_to_page(pmd_page_vaddr(pmd));
 }
 
@@ -403,7 +403,7 @@ static pte_t *__alloc_for_cache(struct mm_struct *mm, int kernel)
 	 * count.
 	 */
 	if (likely(!mm->context.pte_frag)) {
-		atomic_set(&page->_count, PTE_FRAG_NR);
+		set_page_count(page, PTE_FRAG_NR);
 		mm->context.pte_frag = ret + PTE_FRAG_SIZE;
 	}
 	spin_unlock(&mm->page_table_lock);
@@ -604,55 +604,6 @@ int pmdp_clear_flush_young(struct vm_area_struct *vma,
 }
 
 /*
- * We mark the pmd splitting and invalidate all the hpte
- * entries for this hugepage.
- */
-void pmdp_splitting_flush(struct vm_area_struct *vma,
-			  unsigned long address, pmd_t *pmdp)
-{
-	unsigned long old, tmp;
-
-	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
-
-#ifdef CONFIG_DEBUG_VM
-	WARN_ON(!pmd_trans_huge(*pmdp));
-	assert_spin_locked(&vma->vm_mm->page_table_lock);
-#endif
-
-#ifdef PTE_ATOMIC_UPDATES
-
-	__asm__ __volatile__(
-	"1:	ldarx	%0,0,%3\n\
-		andi.	%1,%0,%6\n\
-		bne-	1b \n\
-		ori	%1,%0,%4 \n\
-		stdcx.	%1,0,%3 \n\
-		bne-	1b"
-	: "=&r" (old), "=&r" (tmp), "=m" (*pmdp)
-	: "r" (pmdp), "i" (_PAGE_SPLITTING), "m" (*pmdp), "i" (_PAGE_BUSY)
-	: "cc" );
-#else
-	old = pmd_val(*pmdp);
-	*pmdp = __pmd(old | _PAGE_SPLITTING);
-#endif
-	/*
-	 * If we didn't had the splitting flag set, go and flush the
-	 * HPTE entries.
-	 */
-	trace_hugepage_splitting(address, old);
-	if (!(old & _PAGE_SPLITTING)) {
-		/* We need to flush the hpte */
-		if (old & _PAGE_HASHPTE)
-			hpte_do_hugepage_flush(vma->vm_mm, address, pmdp, old);
-	}
-	/*
-	 * This ensures that generic code that rely on IRQ disabling
-	 * to prevent a parallel THP split work as expected.
-	 */
-	kick_all_cpus_sync();
-}
-
-/*
  * We want to put the pgtable in pmd and use pgtable for tracking
  * the base page size hptes
  */
@@ -695,6 +646,28 @@ pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
 	return pgtable;
 }
 
+void pmdp_huge_split_prepare(struct vm_area_struct *vma,
+			     unsigned long address, pmd_t *pmdp)
+{
+	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
+	VM_BUG_ON(REGION_ID(address) != USER_REGION_ID);
+
+	/*
+	 * We can't mark the pmd none here, because that will cause a race
+	 * against exit_mmap. We need to continue mark pmd TRANS HUGE, while
+	 * we spilt, but at the same time we wan't rest of the ppc64 code
+	 * not to insert hash pte on this, because we will be modifying
+	 * the deposited pgtable in the caller of this function. Hence
+	 * clear the _PAGE_USER so that we move the fault handling to
+	 * higher level function and that will serialize against ptl.
+	 * We need to flush existing hash pte entries here even though,
+	 * the translation is still valid, because we will withdraw
+	 * pgtable_t after this.
+	 */
+	pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_USER, 0);
+}
+
+
 /*
  * set a new huge pmd. We should not be called for updating
  * an existing pmd entry. That should go via pmd_hugepage_update.
@@ -712,10 +685,20 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 	return set_pte_at(mm, addr, pmdp_ptep(pmdp), pmd_pte(pmd));
 }
 
+/*
+ * We use this to invalidate a pmdp entry before switching from a
+ * hugepte to regular pmd entry.
+ */
 void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 		     pmd_t *pmdp)
 {
 	pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0);
+
+	/*
+	 * This ensures that generic code that rely on IRQ disabling
+	 * to prevent a parallel THP split work as expected.
+	 */
+	kick_all_cpus_sync();
 }
 
 /*
@@ -759,22 +742,15 @@ void hpte_do_hugepage_flush(struct mm_struct *mm, unsigned long addr,
 
 static pmd_t pmd_set_protbits(pmd_t pmd, pgprot_t pgprot)
 {
-	pmd_val(pmd) |= pgprot_val(pgprot);
-	return pmd;
+	return __pmd(pmd_val(pmd) | pgprot_val(pgprot));
 }
 
 pmd_t pfn_pmd(unsigned long pfn, pgprot_t pgprot)
 {
-	pmd_t pmd;
-	/*
-	 * For a valid pte, we would have _PAGE_PRESENT always
-	 * set. We use this to check THP page at pmd level.
-	 * leaf pte for huge page, bottom two bits != 00
-	 */
-	pmd_val(pmd) = pfn << PTE_RPN_SHIFT;
-	pmd_val(pmd) |= _PAGE_THP_HUGE;
-	pmd = pmd_set_protbits(pmd, pgprot);
-	return pmd;
+	unsigned long pmdv;
+
+	pmdv = (pfn << PTE_RPN_SHIFT) & PTE_RPN_MASK;
+	return pmd_set_protbits(__pmd(pmdv), pgprot);
 }
 
 pmd_t mk_pmd(struct page *page, pgprot_t pgprot)
@@ -784,10 +760,11 @@ pmd_t mk_pmd(struct page *page, pgprot_t pgprot)
 
 pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
+	unsigned long pmdv;
 
-	pmd_val(pmd) &= _HPAGE_CHG_MASK;
-	pmd = pmd_set_protbits(pmd, newprot);
-	return pmd;
+	pmdv = pmd_val(pmd);
+	pmdv &= _HPAGE_CHG_MASK;
+	return pmd_set_protbits(__pmd(pmdv), newprot);
 }
 
 /*
@@ -840,6 +817,13 @@ pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
 
 int has_transparent_hugepage(void)
 {
+
+	BUILD_BUG_ON_MSG((PMD_SHIFT - PAGE_SHIFT) >= MAX_ORDER,
+		"hugepages can't be allocated by the buddy allocator");
+
+	BUILD_BUG_ON_MSG((PMD_SHIFT - PAGE_SHIFT) < 2,
+			 "We need more than 2 pages to do deferred thp split");
+
 	if (!mmu_has_feature(MMU_FTR_16M_PAGE))
 		return 0;
 	/*
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 6b2f3e457171..2a049fb8523d 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -49,7 +49,7 @@ struct batrange {		/* stores address ranges mapped by BATs */
 /*
  * Return PA for this VA if it is mapped by a BAT, or 0
  */
-phys_addr_t v_mapped_by_bats(unsigned long va)
+phys_addr_t v_block_mapped(unsigned long va)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
@@ -61,7 +61,7 @@ phys_addr_t v_mapped_by_bats(unsigned long va)
 /*
  * Return VA for a given PA or 0 if not mapped
  */
-unsigned long p_mapped_by_bats(phys_addr_t pa)
+unsigned long p_block_mapped(phys_addr_t pa)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 515730e499fe..825b6873391f 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -228,7 +228,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 		asm volatile("slbie %0" : : "r" (slbie_data));
 
 	get_paca()->slb_cache_ptr = 0;
-	get_paca()->context = mm->context;
+	copy_mm_to_paca(&mm->context);
 
 	/*
 	 * preload some userspace segments into the SLB.
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 0f432a702870..42954f0b47ac 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -185,8 +185,7 @@ static void slice_flush_segments(void *parm)
 	if (mm != current->active_mm)
 		return;
 
-	/* update the paca copy of the context struct */
-	get_paca()->context = current->active_mm->context;
+	copy_mm_to_paca(&current->active_mm->context);
 
 	local_irq_save(flags);
 	slb_flush_and_rebolt();
diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c
index fa9fb5b4c66c..d5543514c1df 100644
--- a/arch/powerpc/mm/subpage-prot.c
+++ b/arch/powerpc/mm/subpage-prot.c
@@ -135,7 +135,7 @@ static int subpage_walk_pmd_entry(pmd_t *pmd, unsigned long addr,
 				  unsigned long end, struct mm_walk *walk)
 {
 	struct vm_area_struct *vma = walk->vma;
-	split_huge_page_pmd(vma, addr, pmd);
+	split_huge_pmd(vma, pmd, addr);
 	return 0;
 }
 
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 29d6987c37ba..eb82d787d99a 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -895,7 +895,7 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 BEGIN_MMU_FTR_SECTION
 virt_page_table_tlb_miss_done:
 
-	/* We have overriden MAS2:EPN but currently our primary TLB miss
+	/* We have overridden MAS2:EPN but currently our primary TLB miss
 	 * handler will always restore it so that should not be an issue,
 	 * if we ever optimize the primary handler to not write MAS2 on
 	 * some cases, we'll have to restore MAS2:EPN here based on the
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index bb04e4df3100..f4668488512c 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -640,9 +640,7 @@ static void early_init_this_mmu(void)
 		 * transient mapping would cause problems.
 		 */
 #ifdef CONFIG_SMP
-		if (cpu != boot_cpuid &&
-		    (cpu != cpu_first_thread_sibling(cpu) ||
-		     cpu == cpu_first_thread_sibling(boot_cpuid)))
+		if (hweight32(get_tensr()) > 1)
 			map = false;
 #endif
 
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 68c477592e43..eabecfcaef7c 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -108,7 +108,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	blr
 2:
 #ifdef CONFIG_PPC_47x
-	oris	r7,r6,0x8000	/* specify way explicitely */
+	oris	r7,r6,0x8000	/* specify way explicitly */
 	clrrwi	r4,r3,12	/* get an EPN for the hashing with V = 0 */
 	ori	r4,r4,PPC47x_TLBE_SIZE
 	tlbwe   r4,r7,0		/* write it */
@@ -149,7 +149,7 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_47x)
 	li	r3,-1		/* Current set */
 	lis	r10,tlb_47x_boltmap@h
 	ori	r10,r10,tlb_47x_boltmap@l
-	lis	r7,0x8000	/* Specify way explicitely */
+	lis	r7,0x8000	/* Specify way explicitly */
 
 	b	9f		/* For each set */
 
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 04782164ee67..2d66a8446198 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -78,18 +78,9 @@ static void bpf_jit_build_prologue(struct bpf_prog *fp, u32 *image,
 		PPC_LI(r_X, 0);
 	}
 
-	switch (filter[0].code) {
-	case BPF_RET | BPF_K:
-	case BPF_LD | BPF_W | BPF_LEN:
-	case BPF_LD | BPF_W | BPF_ABS:
-	case BPF_LD | BPF_H | BPF_ABS:
-	case BPF_LD | BPF_B | BPF_ABS:
-		/* first instruction sets A register (or is RET 'constant') */
-		break;
-	default:
-		/* make sure we dont leak kernel information to user */
+	/* make sure we dont leak kernel information to user */
+	if (bpf_needs_clear_a(&filter[0]))
 		PPC_LI(r_A, 0);
-	}
 }
 
 static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 863d89386f60..c82497a31c54 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -208,7 +208,7 @@ static void pm_rtas_reset_signals(u32 node)
 
 	/*
 	 * The debug bus is being set to the passthru disable state.
-	 * However, the FW still expects atleast one legal signal routing
+	 * However, the FW still expects at least one legal signal routing
 	 * entry or it will return an error on the arguments.	If we don't
 	 * supply a valid entry, we must ignore all return values.  Ignoring
 	 * all return values means we might miss an error we should be
@@ -1008,7 +1008,7 @@ static int initial_lfsr[] = {
  *
  * To avoid the time to compute the LFSR, a lookup table is used.  The 24 bit
  * LFSR sequence is broken into four ranges.  The spacing of the precomputed
- * values is adjusted in each range so the error between the user specifed
+ * values is adjusted in each range so the error between the user specified
  * number (N) of events between samples and the actual number of events based
  * on the precomputed value will be les then about 6.2%.  Note, if the user
  * specifies N < 2^16, the LFSR value that is 2^16 from the end will be used.
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index d1e65ce545b3..97a1d40d8696 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -651,7 +651,7 @@ static void pmao_restore_workaround(bool ebb)
 
 	/*
 	 * We are already soft-disabled in power_pmu_enable(). We need to hard
-	 * enable to actually prevent the PMU exception from firing.
+	 * disable to actually prevent the PMU exception from firing.
 	 */
 	hard_irq_disable();
 
diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c
index 9f9dfda9ed2c..2da41b78cb6d 100644
--- a/arch/powerpc/perf/hv-24x7.c
+++ b/arch/powerpc/perf/hv-24x7.c
@@ -27,20 +27,6 @@
 #include "hv-24x7-catalog.h"
 #include "hv-common.h"
 
-static const char *event_domain_suffix(unsigned domain)
-{
-	switch (domain) {
-#define DOMAIN(n, v, x, c)		\
-	case HV_PERF_DOMAIN_##n:	\
-		return "__" #n;
-#include "hv-24x7-domains.h"
-#undef DOMAIN
-	default:
-		WARN(1, "unknown domain %d\n", domain);
-		return "__UNKNOWN_DOMAIN_SUFFIX";
-	}
-}
-
 static bool domain_is_valid(unsigned domain)
 {
 	switch (domain) {
@@ -68,6 +54,24 @@ static bool is_physical_domain(unsigned domain)
 	}
 }
 
+static const char *domain_name(unsigned domain)
+{
+	if (!domain_is_valid(domain))
+		return NULL;
+
+	switch (domain) {
+	case HV_PERF_DOMAIN_PHYS_CHIP:		return "Physical Chip";
+	case HV_PERF_DOMAIN_PHYS_CORE:		return "Physical Core";
+	case HV_PERF_DOMAIN_VCPU_HOME_CORE:	return "VCPU Home Core";
+	case HV_PERF_DOMAIN_VCPU_HOME_CHIP:	return "VCPU Home Chip";
+	case HV_PERF_DOMAIN_VCPU_HOME_NODE:	return "VCPU Home Node";
+	case HV_PERF_DOMAIN_VCPU_REMOTE_NODE:	return "VCPU Remote Node";
+	}
+
+	WARN_ON_ONCE(domain);
+	return NULL;
+}
+
 static bool catalog_entry_domain_is_valid(unsigned domain)
 {
 	return is_physical_domain(domain);
@@ -101,6 +105,7 @@ static bool catalog_entry_domain_is_valid(unsigned domain)
 EVENT_DEFINE_RANGE_FORMAT(domain, config, 0, 3);
 /* u16 */
 EVENT_DEFINE_RANGE_FORMAT(core, config, 16, 31);
+EVENT_DEFINE_RANGE_FORMAT(chip, config, 16, 31);
 EVENT_DEFINE_RANGE_FORMAT(vcpu, config, 16, 31);
 /* u32, see "data_offset" */
 EVENT_DEFINE_RANGE_FORMAT(offset, config, 32, 63);
@@ -115,6 +120,7 @@ static struct attribute *format_attrs[] = {
 	&format_attr_domain.attr,
 	&format_attr_offset.attr,
 	&format_attr_core.attr,
+	&format_attr_chip.attr,
 	&format_attr_vcpu.attr,
 	&format_attr_lpar.attr,
 	NULL,
@@ -274,32 +280,70 @@ static unsigned long h_get_24x7_catalog_page(char page[],
 					version, index);
 }
 
-static unsigned core_domains[] = {
-	HV_PERF_DOMAIN_PHYS_CORE,
-	HV_PERF_DOMAIN_VCPU_HOME_CORE,
-	HV_PERF_DOMAIN_VCPU_HOME_CHIP,
-	HV_PERF_DOMAIN_VCPU_HOME_NODE,
-	HV_PERF_DOMAIN_VCPU_REMOTE_NODE,
-};
-/* chip event data always yeilds a single event, core yeilds multiple */
-#define MAX_EVENTS_PER_EVENT_DATA ARRAY_SIZE(core_domains)
-
+/*
+ * Each event we find in the catalog, will have a sysfs entry. Format the
+ * data for this sysfs entry based on the event's domain.
+ *
+ * Events belonging to the Chip domain can only be monitored in that domain.
+ * i.e the domain for these events is a fixed/knwon value.
+ *
+ * Events belonging to the Core domain can be monitored either in the physical
+ * core or in one of the virtual CPU domains. So the domain value for these
+ * events must be specified by the user (i.e is a required parameter). Format
+ * the Core events with 'domain=?' so the perf-tool can error check required
+ * parameters.
+ *
+ * NOTE: For the Core domain events, rather than making domain a required
+ *	 parameter we could default it to PHYS_CORE and allowe users to
+ *	 override the domain to one of the VCPU domains.
+ *
+ *	 However, this can make the interface a little inconsistent.
+ *
+ *	 If we set domain=2 (PHYS_CHIP) and allow user to override this field
+ *	 the user may be tempted to also modify the "offset=x" field in which
+ *	 can lead to confusing usage. Consider the HPM_PCYC (offset=0x18) and
+ *	 HPM_INST (offset=0x20) events. With:
+ *
+ *		perf stat -e hv_24x7/HPM_PCYC,offset=0x20/
+ *
+ *	we end up monitoring HPM_INST, while the command line has HPM_PCYC.
+ *
+ *	By not assigning a default value to the domain for the Core events,
+ *	we can have simple guidelines:
+ *
+ *		- Specifying values for parameters with "=?" is required.
+ *
+ *		- Specifying (i.e overriding) values for other parameters
+ *		  is undefined.
+ */
 static char *event_fmt(struct hv_24x7_event_data *event, unsigned domain)
 {
 	const char *sindex;
 	const char *lpar;
+	const char *domain_str;
+	char buf[8];
 
-	if (is_physical_domain(domain)) {
+	switch (domain) {
+	case HV_PERF_DOMAIN_PHYS_CHIP:
+		snprintf(buf, sizeof(buf), "%d", domain);
+		domain_str = buf;
+		lpar = "0x0";
+		sindex = "chip";
+		break;
+	case HV_PERF_DOMAIN_PHYS_CORE:
+		domain_str = "?";
 		lpar = "0x0";
 		sindex = "core";
-	} else {
+		break;
+	default:
+		domain_str = "?";
 		lpar = "?";
 		sindex = "vcpu";
 	}
 
 	return kasprintf(GFP_KERNEL,
-			"domain=0x%x,offset=0x%x,%s=?,lpar=%s",
-			domain,
+			"domain=%s,offset=0x%x,%s=?,lpar=%s",
+			domain_str,
 			be16_to_cpu(event->event_counter_offs) +
 				be16_to_cpu(event->event_group_record_offs),
 			sindex,
@@ -339,6 +383,15 @@ static struct attribute *device_str_attr_create_(char *name, char *str)
 	return &attr->attr.attr;
 }
 
+/*
+ * Allocate and initialize strings representing event attributes.
+ *
+ * NOTE: The strings allocated here are never destroyed and continue to
+ *	 exist till shutdown. This is to allow us to create as many events
+ *	 from the catalog as possible, even if we encounter errors with some.
+ *	 In case of changes to error paths in future, these may need to be
+ *	 freed by the caller.
+ */
 static struct attribute *device_str_attr_create(char *name, int name_max,
 						int name_nonce,
 						char *str, size_t str_max)
@@ -370,16 +423,6 @@ out_s:
 	return NULL;
 }
 
-static void device_str_attr_destroy(struct attribute *attr)
-{
-	struct dev_ext_attribute *d;
-
-	d = container_of(attr, struct dev_ext_attribute, attr.attr);
-	kfree(d->var);
-	kfree(d->attr.attr.name);
-	kfree(d);
-}
-
 static struct attribute *event_to_attr(unsigned ix,
 				       struct hv_24x7_event_data *event,
 				       unsigned domain,
@@ -387,7 +430,6 @@ static struct attribute *event_to_attr(unsigned ix,
 {
 	int event_name_len;
 	char *ev_name, *a_ev_name, *val;
-	const char *ev_suffix;
 	struct attribute *attr;
 
 	if (!domain_is_valid(domain)) {
@@ -400,14 +442,13 @@ static struct attribute *event_to_attr(unsigned ix,
 	if (!val)
 		return NULL;
 
-	ev_suffix = event_domain_suffix(domain);
 	ev_name = event_name(event, &event_name_len);
 	if (!nonce)
-		a_ev_name = kasprintf(GFP_KERNEL, "%.*s%s",
-				(int)event_name_len, ev_name, ev_suffix);
+		a_ev_name = kasprintf(GFP_KERNEL, "%.*s",
+				(int)event_name_len, ev_name);
 	else
-		a_ev_name = kasprintf(GFP_KERNEL, "%.*s%s__%d",
-				(int)event_name_len, ev_name, ev_suffix, nonce);
+		a_ev_name = kasprintf(GFP_KERNEL, "%.*s__%d",
+				(int)event_name_len, ev_name, nonce);
 
 	if (!a_ev_name)
 		goto out_val;
@@ -452,53 +493,14 @@ event_to_long_desc_attr(struct hv_24x7_event_data *event, int nonce)
 	return device_str_attr_create(name, nl, nonce, desc, dl);
 }
 
-static ssize_t event_data_to_attrs(unsigned ix, struct attribute **attrs,
+static int event_data_to_attrs(unsigned ix, struct attribute **attrs,
 				   struct hv_24x7_event_data *event, int nonce)
 {
-	unsigned i;
-
-	switch (event->domain) {
-	case HV_PERF_DOMAIN_PHYS_CHIP:
-		*attrs = event_to_attr(ix, event, event->domain, nonce);
-		return 1;
-	case HV_PERF_DOMAIN_PHYS_CORE:
-		for (i = 0; i < ARRAY_SIZE(core_domains); i++) {
-			attrs[i] = event_to_attr(ix, event, core_domains[i],
-						nonce);
-			if (!attrs[i]) {
-				pr_warn("catalog event %u: individual attr %u "
-					"creation failure\n", ix, i);
-				for (; i; i--)
-					device_str_attr_destroy(attrs[i - 1]);
-				return -1;
-			}
-		}
-		return i;
-	default:
-		pr_warn("catalog event %u: domain %u is not allowed in the "
-				"catalog\n", ix, event->domain);
+	*attrs = event_to_attr(ix, event, event->domain, nonce);
+	if (!*attrs)
 		return -1;
-	}
-}
 
-static size_t event_to_attr_ct(struct hv_24x7_event_data *event)
-{
-	switch (event->domain) {
-	case HV_PERF_DOMAIN_PHYS_CHIP:
-		return 1;
-	case HV_PERF_DOMAIN_PHYS_CORE:
-		return ARRAY_SIZE(core_domains);
-	default:
-		return 0;
-	}
-}
-
-static unsigned long vmalloc_to_phys(void *v)
-{
-	struct page *p = vmalloc_to_page(v);
-
-	BUG_ON(!p);
-	return page_to_phys(p) + offset_in_page(v);
+	return 0;
 }
 
 /* */
@@ -726,9 +728,8 @@ static int create_events_from_catalog(struct attribute ***events_,
 		goto e_free;
 	}
 
-	if (SIZE_MAX / MAX_EVENTS_PER_EVENT_DATA - 1 < event_entry_count) {
-		pr_err("event_entry_count %zu is invalid\n",
-				event_entry_count);
+	if (SIZE_MAX - 1 < event_entry_count) {
+		pr_err("event_entry_count %zu is invalid\n", event_entry_count);
 		ret = -EIO;
 		goto e_free;
 	}
@@ -801,7 +802,7 @@ static int create_events_from_catalog(struct attribute ***events_,
 			continue;
 		}
 
-		attr_max += event_to_attr_ct(event);
+		attr_max++;
 	}
 
 	event_idx_last = event_idx;
@@ -851,12 +852,12 @@ static int create_events_from_catalog(struct attribute ***events_,
 		nonce = event_uniq_add(&ev_uniq, name, nl, event->domain);
 		ct    = event_data_to_attrs(event_idx, events + event_attr_ct,
 					    event, nonce);
-		if (ct <= 0) {
+		if (ct < 0) {
 			pr_warn("event %zu (%.*s) creation failure, skipping\n",
 				event_idx, nl, name);
 			junk_events++;
 		} else {
-			event_attr_ct += ct;
+			event_attr_ct++;
 			event_descs[desc_ct] = event_to_desc_attr(event, nonce);
 			if (event_descs[desc_ct])
 				desc_ct++;
@@ -961,6 +962,27 @@ e_free:
 	return ret;
 }
 
+static ssize_t domains_show(struct device *dev, struct device_attribute *attr,
+			    char *page)
+{
+	int d, n, count = 0;
+	const char *str;
+
+	for (d = 0; d < HV_PERF_DOMAIN_MAX; d++) {
+		str = domain_name(d);
+		if (!str)
+			continue;
+
+		n = sprintf(page, "%d: %s\n", d, str);
+		if (n < 0)
+			break;
+
+		count += n;
+		page += n;
+	}
+	return count;
+}
+
 #define PAGE_0_ATTR(_name, _fmt, _expr)				\
 static ssize_t _name##_show(struct device *dev,			\
 			    struct device_attribute *dev_attr,	\
@@ -989,6 +1011,7 @@ PAGE_0_ATTR(catalog_version, "%lld\n",
 PAGE_0_ATTR(catalog_len, "%lld\n",
 		(unsigned long long)be32_to_cpu(page_0->length) * 4096);
 static BIN_ATTR_RO(catalog, 0/* real length varies */);
+static DEVICE_ATTR_RO(domains);
 
 static struct bin_attribute *if_bin_attrs[] = {
 	&bin_attr_catalog,
@@ -998,6 +1021,7 @@ static struct bin_attribute *if_bin_attrs[] = {
 static struct attribute *if_attrs[] = {
 	&dev_attr_catalog_len.attr,
 	&dev_attr_catalog_version.attr,
+	&dev_attr_domains.attr,
 	NULL,
 };
 
@@ -1089,10 +1113,16 @@ static int add_event_to_24x7_request(struct perf_event *event,
 		return -EINVAL;
 	}
 
-	if (is_physical_domain(event_get_domain(event)))
+	switch (event_get_domain(event)) {
+	case HV_PERF_DOMAIN_PHYS_CHIP:
+		idx = event_get_chip(event);
+		break;
+	case HV_PERF_DOMAIN_PHYS_CORE:
 		idx = event_get_core(event);
-	else
+		break;
+	default:
 		idx = event_get_vcpu(event);
+	}
 
 	i = request_buffer->num_requests++;
 	req = &request_buffer->requests[i];
@@ -1208,11 +1238,12 @@ static int h_24x7_event_init(struct perf_event *event)
 		return -EACCES;
 	}
 
-	/* see if the event complains */
+	/* Get the initial value of the counter for this event */
 	if (single_24x7_request(event, &ct)) {
 		pr_devel("test hcall failed\n");
 		return -EIO;
 	}
+	(void)local64_xchg(&event->hw.prev_count, ct);
 
 	return 0;
 }
@@ -1275,6 +1306,16 @@ static void h_24x7_event_read(struct perf_event *event)
 			h24x7hw = &get_cpu_var(hv_24x7_hw);
 			h24x7hw->events[i] = event;
 			put_cpu_var(h24x7hw);
+			/*
+			 * Clear the event count so we can compute the _change_
+			 * in the 24x7 raw counter value at the end of the txn.
+			 *
+			 * Note that we could alternatively read the 24x7 value
+			 * now and save its value in event->hw.prev_count. But
+			 * that would require issuing a hcall, which would then
+			 * defeat the purpose of using the txn interface.
+			 */
+			local64_set(&event->count, 0);
 		}
 
 		put_cpu_var(hv_24x7_reqb);
diff --git a/arch/powerpc/perf/hv-24x7.h b/arch/powerpc/perf/hv-24x7.h
index 0f9fa21a29f2..791455e7f5cf 100644
--- a/arch/powerpc/perf/hv-24x7.h
+++ b/arch/powerpc/perf/hv-24x7.h
@@ -7,6 +7,7 @@ enum hv_perf_domains {
 #define DOMAIN(n, v, x, c) HV_PERF_DOMAIN_##n = v,
 #include "hv-24x7-domains.h"
 #undef DOMAIN
+	HV_PERF_DOMAIN_MAX,
 };
 
 struct hv_24x7_request {
@@ -80,7 +81,7 @@ struct hv_24x7_result {
 	__u8 results_complete;
 	__be16 num_elements_returned;
 
-	/* This is a copy of @data_size from the coresponding hv_24x7_request */
+	/* This is a copy of @data_size from the corresponding hv_24x7_request */
 	__be16 result_element_data_size;
 	__u8 reserved[0x2];
 
diff --git a/arch/powerpc/perf/hv-gpci.c b/arch/powerpc/perf/hv-gpci.c
index 856fe6e03c2a..7aa37236bb70 100644
--- a/arch/powerpc/perf/hv-gpci.c
+++ b/arch/powerpc/perf/hv-gpci.c
@@ -127,8 +127,16 @@ static const struct attribute_group *attr_groups[] = {
 	NULL,
 };
 
-#define GPCI_MAX_DATA_BYTES \
-	(1024 - sizeof(struct hv_get_perf_counter_info_params))
+#define HGPCI_REQ_BUFFER_SIZE	4096
+#define HGPCI_MAX_DATA_BYTES \
+	(HGPCI_REQ_BUFFER_SIZE - sizeof(struct hv_get_perf_counter_info_params))
+
+DEFINE_PER_CPU(char, hv_gpci_reqb[HGPCI_REQ_BUFFER_SIZE]) __aligned(sizeof(uint64_t));
+
+struct hv_gpci_request_buffer {
+	struct hv_get_perf_counter_info_params params;
+	uint8_t bytes[HGPCI_MAX_DATA_BYTES];
+} __packed;
 
 static unsigned long single_gpci_request(u32 req, u32 starting_index,
 		u16 secondary_index, u8 version_in, u32 offset, u8 length,
@@ -137,24 +145,21 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,
 	unsigned long ret;
 	size_t i;
 	u64 count;
+	struct hv_gpci_request_buffer *arg;
+
+	arg = (void *)get_cpu_var(hv_gpci_reqb);
+	memset(arg, 0, HGPCI_REQ_BUFFER_SIZE);
 
-	struct {
-		struct hv_get_perf_counter_info_params params;
-		uint8_t bytes[GPCI_MAX_DATA_BYTES];
-	} __packed __aligned(sizeof(uint64_t)) arg = {
-		.params = {
-			.counter_request = cpu_to_be32(req),
-			.starting_index = cpu_to_be32(starting_index),
-			.secondary_index = cpu_to_be16(secondary_index),
-			.counter_info_version_in = version_in,
-		}
-	};
+	arg->params.counter_request = cpu_to_be32(req);
+	arg->params.starting_index = cpu_to_be32(starting_index);
+	arg->params.secondary_index = cpu_to_be16(secondary_index);
+	arg->params.counter_info_version_in = version_in;
 
 	ret = plpar_hcall_norets(H_GET_PERF_COUNTER_INFO,
-			virt_to_phys(&arg), sizeof(arg));
+			virt_to_phys(arg), HGPCI_REQ_BUFFER_SIZE);
 	if (ret) {
 		pr_devel("hcall failed: 0x%lx\n", ret);
-		return ret;
+		goto out;
 	}
 
 	/*
@@ -163,9 +168,11 @@ static unsigned long single_gpci_request(u32 req, u32 starting_index,
 	 */
 	count = 0;
 	for (i = offset; i < offset + length; i++)
-		count |= arg.bytes[i] << (i - offset);
+		count |= arg->bytes[i] << (i - offset);
 
 	*value = count;
+out:
+	put_cpu_var(hv_gpci_reqb);
 	return ret;
 }
 
@@ -245,10 +252,10 @@ static int h_gpci_event_init(struct perf_event *event)
 	}
 
 	/* last byte within the buffer? */
-	if ((event_get_offset(event) + length) > GPCI_MAX_DATA_BYTES) {
+	if ((event_get_offset(event) + length) > HGPCI_MAX_DATA_BYTES) {
 		pr_devel("request outside of buffer: %zu > %zu\n",
 				(size_t)event_get_offset(event) + length,
-				GPCI_MAX_DATA_BYTES);
+				HGPCI_MAX_DATA_BYTES);
 		return -EINVAL;
 	}
 
diff --git a/arch/powerpc/perf/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c
index 5b62f2389290..a383c23a9070 100644
--- a/arch/powerpc/perf/power7-pmu.c
+++ b/arch/powerpc/perf/power7-pmu.c
@@ -54,7 +54,7 @@
  * Power7 event codes.
  */
 #define EVENT(_name, _code) \
-	PME_##_name = _code,
+	_name = _code,
 
 enum {
 #include "power7-events-list.h"
@@ -318,14 +318,14 @@ static void power7_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 }
 
 static int power7_generic_events[] = {
-	[PERF_COUNT_HW_CPU_CYCLES] =			PME_PM_CYC,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] =	PME_PM_GCT_NOSLOT_CYC,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] =	PME_PM_CMPLU_STALL,
-	[PERF_COUNT_HW_INSTRUCTIONS] =			PME_PM_INST_CMPL,
-	[PERF_COUNT_HW_CACHE_REFERENCES] =		PME_PM_LD_REF_L1,
-	[PERF_COUNT_HW_CACHE_MISSES] =			PME_PM_LD_MISS_L1,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] =		PME_PM_BRU_FIN,
-	[PERF_COUNT_HW_BRANCH_MISSES] =			PME_PM_BR_MPRED,
+	[PERF_COUNT_HW_CPU_CYCLES] =			PM_CYC,
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] =	PM_GCT_NOSLOT_CYC,
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] =	PM_CMPLU_STALL,
+	[PERF_COUNT_HW_INSTRUCTIONS] =			PM_INST_CMPL,
+	[PERF_COUNT_HW_CACHE_REFERENCES] =		PM_LD_REF_L1,
+	[PERF_COUNT_HW_CACHE_MISSES] =			PM_LD_MISS_L1,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] =		PM_BRU_FIN,
+	[PERF_COUNT_HW_BRANCH_MISSES] =			PM_BR_MPRED,
 };
 
 #define C(x)	PERF_COUNT_HW_CACHE_##x
diff --git a/arch/powerpc/perf/power8-events-list.h b/arch/powerpc/perf/power8-events-list.h
new file mode 100644
index 000000000000..741b77edd03e
--- /dev/null
+++ b/arch/powerpc/perf/power8-events-list.h
@@ -0,0 +1,51 @@
+/*
+ * Performance counter support for POWER8 processors.
+ *
+ * Copyright 2014 Sukadev Bhattiprolu, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * Power8 event codes.
+ */
+EVENT(PM_CYC,					0x0001e)
+EVENT(PM_GCT_NOSLOT_CYC,			0x100f8)
+EVENT(PM_CMPLU_STALL,				0x4000a)
+EVENT(PM_INST_CMPL,				0x00002)
+EVENT(PM_BRU_FIN,				0x10068)
+EVENT(PM_BR_MPRED_CMPL,				0x400f6)
+
+/* All L1 D cache load references counted at finish, gated by reject */
+EVENT(PM_LD_REF_L1,				0x100ee)
+/* Load Missed L1 */
+EVENT(PM_LD_MISS_L1,				0x3e054)
+/* Store Missed L1 */
+EVENT(PM_ST_MISS_L1,				0x300f0)
+/* L1 cache data prefetches */
+EVENT(PM_L1_PREF,				0x0d8b8)
+/* Instruction fetches from L1 */
+EVENT(PM_INST_FROM_L1,				0x04080)
+/* Demand iCache Miss */
+EVENT(PM_L1_ICACHE_MISS,			0x200fd)
+/* Instruction Demand sectors wriittent into IL1 */
+EVENT(PM_L1_DEMAND_WRITE,			0x0408c)
+/* Instruction prefetch written into IL1 */
+EVENT(PM_IC_PREF_WRITE,				0x0408e)
+/* The data cache was reloaded from local core's L3 due to a demand load */
+EVENT(PM_DATA_FROM_L3,				0x4c042)
+/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */
+EVENT(PM_DATA_FROM_L3MISS,			0x300fe)
+/* All successful D-side store dispatches for this thread */
+EVENT(PM_L2_ST,					0x17080)
+/* All successful D-side store dispatches for this thread that were L2 Miss */
+EVENT(PM_L2_ST_MISS,				0x17082)
+/* Total HW L3 prefetches(Load+store) */
+EVENT(PM_L3_PREF_ALL,				0x4e052)
+/* Data PTEG reload */
+EVENT(PM_DTLB_MISS,				0x300fc)
+/* ITLB Reloaded */
+EVENT(PM_ITLB_MISS,				0x400fc)
diff --git a/arch/powerpc/perf/power8-pmu.c b/arch/powerpc/perf/power8-pmu.c
index 7d5e295255b7..690d9186a855 100644
--- a/arch/powerpc/perf/power8-pmu.c
+++ b/arch/powerpc/perf/power8-pmu.c
@@ -17,48 +17,16 @@
 #include <asm/firmware.h>
 #include <asm/cputable.h>
 
-
 /*
  * Some power8 event codes.
  */
-#define PM_CYC				0x0001e
-#define PM_GCT_NOSLOT_CYC		0x100f8
-#define PM_CMPLU_STALL			0x4000a
-#define PM_INST_CMPL			0x00002
-#define PM_BRU_FIN			0x10068
-#define PM_BR_MPRED_CMPL		0x400f6
-
-/* All L1 D cache load references counted at finish, gated by reject */
-#define PM_LD_REF_L1			0x100ee
-/* Load Missed L1 */
-#define PM_LD_MISS_L1			0x3e054
-/* Store Missed L1 */
-#define PM_ST_MISS_L1			0x300f0
-/* L1 cache data prefetches */
-#define PM_L1_PREF			0x0d8b8
-/* Instruction fetches from L1 */
-#define PM_INST_FROM_L1			0x04080
-/* Demand iCache Miss */
-#define PM_L1_ICACHE_MISS		0x200fd
-/* Instruction Demand sectors wriittent into IL1 */
-#define PM_L1_DEMAND_WRITE		0x0408c
-/* Instruction prefetch written into IL1 */
-#define PM_IC_PREF_WRITE		0x0408e
-/* The data cache was reloaded from local core's L3 due to a demand load */
-#define PM_DATA_FROM_L3			0x4c042
-/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */
-#define PM_DATA_FROM_L3MISS		0x300fe
-/* All successful D-side store dispatches for this thread */
-#define PM_L2_ST			0x17080
-/* All successful D-side store dispatches for this thread that were L2 Miss */
-#define PM_L2_ST_MISS			0x17082
-/* Total HW L3 prefetches(Load+store) */
-#define PM_L3_PREF_ALL			0x4e052
-/* Data PTEG reload */
-#define PM_DTLB_MISS			0x300fc
-/* ITLB Reloaded */
-#define PM_ITLB_MISS			0x400fc
+#define EVENT(_name, _code)	_name = _code,
+
+enum {
+#include "power8-events-list.h"
+};
 
+#undef EVENT
 
 /*
  * Raw event encoding for POWER8:
@@ -415,7 +383,7 @@ static int power8_compute_mmcr(u64 event[], int n_ev,
 			pmc_inuse |= 1 << pmc;
 	}
 
-	/* In continous sampling mode, update SDAR on TLB miss */
+	/* In continuous sampling mode, update SDAR on TLB miss */
 	mmcra = MMCRA_SDAR_MODE_TLB;
 	mmcr1 = mmcr2 = 0;
 
@@ -604,6 +572,71 @@ static void power8_disable_pmc(unsigned int pmc, unsigned long mmcr[])
 		mmcr[1] &= ~(0xffUL << MMCR1_PMCSEL_SHIFT(pmc + 1));
 }
 
+GENERIC_EVENT_ATTR(cpu-cycles,			PM_CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-frontend,	PM_GCT_NOSLOT_CYC);
+GENERIC_EVENT_ATTR(stalled-cycles-backend,	PM_CMPLU_STALL);
+GENERIC_EVENT_ATTR(instructions,		PM_INST_CMPL);
+GENERIC_EVENT_ATTR(branch-instructions,		PM_BRU_FIN);
+GENERIC_EVENT_ATTR(branch-misses,		PM_BR_MPRED_CMPL);
+GENERIC_EVENT_ATTR(cache-references,		PM_LD_REF_L1);
+GENERIC_EVENT_ATTR(cache-misses,		PM_LD_MISS_L1);
+
+CACHE_EVENT_ATTR(L1-dcache-load-misses,		PM_LD_MISS_L1);
+CACHE_EVENT_ATTR(L1-dcache-loads,		PM_LD_REF_L1);
+
+CACHE_EVENT_ATTR(L1-dcache-prefetches,		PM_L1_PREF);
+CACHE_EVENT_ATTR(L1-dcache-store-misses,	PM_ST_MISS_L1);
+CACHE_EVENT_ATTR(L1-icache-load-misses,		PM_L1_ICACHE_MISS);
+CACHE_EVENT_ATTR(L1-icache-loads,		PM_INST_FROM_L1);
+CACHE_EVENT_ATTR(L1-icache-prefetches,		PM_IC_PREF_WRITE);
+
+CACHE_EVENT_ATTR(LLC-load-misses,		PM_DATA_FROM_L3MISS);
+CACHE_EVENT_ATTR(LLC-loads,			PM_DATA_FROM_L3);
+CACHE_EVENT_ATTR(LLC-prefetches,		PM_L3_PREF_ALL);
+CACHE_EVENT_ATTR(LLC-store-misses,		PM_L2_ST_MISS);
+CACHE_EVENT_ATTR(LLC-stores,			PM_L2_ST);
+
+CACHE_EVENT_ATTR(branch-load-misses,		PM_BR_MPRED_CMPL);
+CACHE_EVENT_ATTR(branch-loads,			PM_BRU_FIN);
+CACHE_EVENT_ATTR(dTLB-load-misses,		PM_DTLB_MISS);
+CACHE_EVENT_ATTR(iTLB-load-misses,		PM_ITLB_MISS);
+
+static struct attribute *power8_events_attr[] = {
+	GENERIC_EVENT_PTR(PM_CYC),
+	GENERIC_EVENT_PTR(PM_GCT_NOSLOT_CYC),
+	GENERIC_EVENT_PTR(PM_CMPLU_STALL),
+	GENERIC_EVENT_PTR(PM_INST_CMPL),
+	GENERIC_EVENT_PTR(PM_BRU_FIN),
+	GENERIC_EVENT_PTR(PM_BR_MPRED_CMPL),
+	GENERIC_EVENT_PTR(PM_LD_REF_L1),
+	GENERIC_EVENT_PTR(PM_LD_MISS_L1),
+
+	CACHE_EVENT_PTR(PM_LD_MISS_L1),
+	CACHE_EVENT_PTR(PM_LD_REF_L1),
+	CACHE_EVENT_PTR(PM_L1_PREF),
+	CACHE_EVENT_PTR(PM_ST_MISS_L1),
+	CACHE_EVENT_PTR(PM_L1_ICACHE_MISS),
+	CACHE_EVENT_PTR(PM_INST_FROM_L1),
+	CACHE_EVENT_PTR(PM_IC_PREF_WRITE),
+	CACHE_EVENT_PTR(PM_DATA_FROM_L3MISS),
+	CACHE_EVENT_PTR(PM_DATA_FROM_L3),
+	CACHE_EVENT_PTR(PM_L3_PREF_ALL),
+	CACHE_EVENT_PTR(PM_L2_ST_MISS),
+	CACHE_EVENT_PTR(PM_L2_ST),
+
+	CACHE_EVENT_PTR(PM_BR_MPRED_CMPL),
+	CACHE_EVENT_PTR(PM_BRU_FIN),
+
+	CACHE_EVENT_PTR(PM_DTLB_MISS),
+	CACHE_EVENT_PTR(PM_ITLB_MISS),
+	NULL
+};
+
+static struct attribute_group power8_pmu_events_group = {
+	.name = "events",
+	.attrs = power8_events_attr,
+};
+
 PMU_FORMAT_ATTR(event,		"config:0-49");
 PMU_FORMAT_ATTR(pmcxsel,	"config:0-7");
 PMU_FORMAT_ATTR(mark,		"config:8");
@@ -640,6 +673,7 @@ struct attribute_group power8_pmu_format_group = {
 
 static const struct attribute_group *power8_pmu_attr_groups[] = {
 	&power8_pmu_format_group,
+	&power8_pmu_events_group,
 	NULL,
 };
 
@@ -816,7 +850,7 @@ static struct power_pmu power8_pmu = {
 	.get_constraint		= power8_get_constraint,
 	.get_alternatives	= power8_get_alternatives,
 	.disable_pmc		= power8_disable_pmc,
-	.flags			= PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_ARCH_207S,
+	.flags			= PPMU_HAS_SIER | PPMU_ARCH_207S,
 	.n_generic		= ARRAY_SIZE(power8_generic_events),
 	.generic_events		= power8_generic_events,
 	.cache_events		= &power8_cache_events,
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
index 711f3d352af7..452da2391153 100644
--- a/arch/powerpc/platforms/512x/mpc512x_shared.c
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -188,7 +188,7 @@ static struct fsl_diu_shared_fb __attribute__ ((__aligned__(8))) diu_shared_fb;
 static inline void mpc512x_free_bootmem(struct page *page)
 {
 	BUG_ON(PageTail(page));
-	BUG_ON(atomic_read(&page->_count) > 1);
+	BUG_ON(page_ref_count(page) > 1);
 	free_reserved_page(page);
 }
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index 6eb3b2abae90..00282c2b0cae 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -319,7 +319,7 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 
 	tmp = in_be32(&pci_regs->gscr);
 #if 0
-	/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
+	/* Reset the exteral bus ( internal PCI controller is NOT reset ) */
 	/* Not necessary and can be a bad thing if for example the bootloader
 	   is displaying a splash screen or ... Just left here for
 	   documentation purpose if anyone need it */
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index a0cb8bd41958..6781bda117be 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -131,23 +131,15 @@ static int ep8248e_mdio_probe(struct platform_device *ofdev)
 	if (!bus)
 		return -ENOMEM;
 
-	bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-	if (bus->irq == NULL) {
-		ret = -ENOMEM;
-		goto err_free_bus;
-	}
-
 	bus->name = "ep8248e-mdio-bitbang";
 	bus->parent = &ofdev->dev;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
 	ret = of_mdiobus_register(bus, ofdev->dev.of_node);
 	if (ret)
-		goto err_free_irq;
+		goto err_free_bus;
 
 	return 0;
-err_free_irq:
-	kfree(bus->irq);
 err_free_bus:
 	free_mdio_bitbang(bus);
 	return ret;
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index bf4c4473abb9..4bc6bbbe9ada 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -37,8 +37,8 @@
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -136,8 +136,6 @@ static void __init mpc83xx_km_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	np = of_find_node_by_name(NULL, "par_io");
 	if (np != NULL) {
 		par_io_init(np);
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index ef9d01a049c1..7e923cad56cf 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -17,7 +17,7 @@
 #include <asm/io.h>
 #include <asm/hw_irq.h>
 #include <asm/ipic.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 8d762203eeff..a973b2ae5df6 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -36,8 +36,8 @@
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -74,8 +74,6 @@ static void __init mpc832x_sys_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index eff5baabc3fb..ea2b87d202ca 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -25,8 +25,8 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -203,8 +203,6 @@ static void __init mpc832x_rdb_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 1a26d2f83401..dd70b85f56d4 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -44,8 +44,8 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <sysdev/simple_gpio.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 
 #include "mpc83xx.h"
 
@@ -82,8 +82,6 @@ static void __init mpc836x_mds_setup_arch(void)
 	mpc83xx_setup_pci();
 
 #ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-
 	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index b63b42d11d6c..4cd7153a6c88 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -20,8 +20,8 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
@@ -35,9 +35,6 @@ static void __init mpc836x_rdk_setup_arch(void)
 		ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
 
 	mpc83xx_setup_pci();
-#ifdef CONFIG_QUICC_ENGINE
-	qe_reset();
-#endif
 }
 
 /*
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 97915feffd42..e626461a63bd 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -8,6 +8,7 @@ menuconfig FSL_SOC_BOOKE
 	select FSL_PCI if PCI
 	select SERIAL_8250_EXTENDED if SERIAL_8250
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
+	select FSL_CORENET_RCPM if PPC_E500MC
 	default y
 
 if FSL_SOC_BOOKE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 1fe7fb95175a..7bc86dae9517 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the PowerPC 85xx linux kernel.
 #
 obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_FSL_PMC)		  += mpc85xx_pm_ops.o
 
 obj-y += common.o
 
diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c
index f0927e58af25..dcfafd6b91ee 100644
--- a/arch/powerpc/platforms/85xx/bsc913x_qds.c
+++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c
@@ -17,6 +17,7 @@
 #include <linux/pci.h>
 #include <asm/mpic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/udbg.h>
 
 #include "mpc85xx.h"
@@ -46,10 +47,12 @@ static void __init bsc913x_qds_setup_arch(void)
 	mpc85xx_smp_init();
 #endif
 
+	fsl_pci_assign_primary();
+
 	pr_info("bsc913x board from Freescale Semiconductor\n");
 }
 
-machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
+machine_arch_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -67,6 +70,9 @@ define_machine(bsc9132_qds) {
 	.probe			= bsc9132_qds_probe,
 	.setup_arch		= bsc913x_qds_setup_arch,
 	.init_IRQ		= bsc913x_qds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index 23791de7b688..28720a4ded7b 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -9,11 +9,14 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include <asm/qe.h>
+#include <asm/fsl_pm.h>
+#include <soc/fsl/qe/qe.h>
 #include <sysdev/cpm2_pic.h>
 
 #include "mpc85xx.h"
 
+const struct fsl_pm_ops *qoriq_pm_ops;
+
 static const struct of_device_id mpc85xx_common_ids[] __initconst = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
@@ -105,7 +108,6 @@ void __init mpc85xx_qe_init(void)
 		return;
 	}
 
-	qe_reset();
 	of_node_put(np);
 
 }
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 46d05c94add6..a2b0bc859de0 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -27,7 +27,7 @@
 #include <asm/udbg.h>
 #include <asm/mpic.h>
 #include <asm/ehv_pic.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe_ic.h>
 
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 7d12a19aa7ee..de72a5f464b1 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -36,17 +36,6 @@
 
 #include "mpc85xx.h"
 
-#ifdef CONFIG_PCI
-static int mpc85xx_exclude_device(struct pci_controller *hose,
-				   u_char bus, u_char devfn)
-{
-	if (bus == 0 && PCI_SLOT(devfn) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-#endif /* CONFIG_PCI */
-
 static void __init mpc85xx_ads_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
@@ -145,10 +134,6 @@ static void __init mpc85xx_ads_setup_arch(void)
 	init_ioports();
 #endif
 
-#ifdef CONFIG_PCI
-	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
-#endif
-
 	fsl_pci_assign_primary();
 }
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 5ac70de3e48a..d7e87ff912d7 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -99,7 +99,7 @@ static void mpc85xx_cds_restart(char *cmd)
 		pci_read_config_byte(dev, 0x47, &tmp);
 
 		/*
-		 *  At this point, the harware reset should have triggered.
+		 *  At this point, the hardware reset should have triggered.
 		 *  However, if it doesn't work for some mysterious reason,
 		 *  just fall through to the default reset below.
 		 */
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index f0be439ceaaa..f61cbe235581 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -48,8 +48,8 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 #include <sysdev/simple_gpio.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 #include <asm/mpic.h>
 #include <asm/swiotlb.h>
 #include "smp.h"
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
new file mode 100644
index 000000000000..f05325f0cc03
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c
@@ -0,0 +1,106 @@
+/*
+ * MPC85xx PM operators
+ *
+ * Copyright 2015 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/fsl/guts.h>
+
+#include <asm/io.h>
+#include <asm/fsl_pm.h>
+
+static struct ccsr_guts __iomem *guts;
+
+static void mpc85xx_irq_mask(int cpu)
+{
+
+}
+
+static void mpc85xx_irq_unmask(int cpu)
+{
+
+}
+
+static void mpc85xx_cpu_die(int cpu)
+{
+	u32 tmp;
+
+	tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
+	mtspr(SPRN_HID0, tmp);
+
+	/* Enter NAP mode. */
+	tmp = mfmsr();
+	tmp |= MSR_WE;
+	asm volatile(
+		"msync\n"
+		"mtmsr %0\n"
+		"isync\n"
+		:
+		: "r" (tmp));
+}
+
+static void mpc85xx_cpu_up_prepare(int cpu)
+{
+
+}
+
+static void mpc85xx_freeze_time_base(bool freeze)
+{
+	uint32_t mask;
+
+	mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
+	if (freeze)
+		setbits32(&guts->devdisr, mask);
+	else
+		clrbits32(&guts->devdisr, mask);
+
+	in_be32(&guts->devdisr);
+}
+
+static const struct of_device_id mpc85xx_smp_guts_ids[] = {
+	{ .compatible = "fsl,mpc8572-guts", },
+	{ .compatible = "fsl,p1020-guts", },
+	{ .compatible = "fsl,p1021-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{ .compatible = "fsl,p1023-guts", },
+	{ .compatible = "fsl,p2020-guts", },
+	{ .compatible = "fsl,bsc9132-guts", },
+	{},
+};
+
+static const struct fsl_pm_ops mpc85xx_pm_ops = {
+	.freeze_time_base = mpc85xx_freeze_time_base,
+	.irq_mask = mpc85xx_irq_mask,
+	.irq_unmask = mpc85xx_irq_unmask,
+	.cpu_die = mpc85xx_cpu_die,
+	.cpu_up_prepare = mpc85xx_cpu_up_prepare,
+};
+
+int __init mpc85xx_setup_pmc(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
+	if (np) {
+		guts = of_iomap(np, 0);
+		of_node_put(np);
+		if (!guts) {
+			pr_err("Could not map guts node address\n");
+			return -ENOMEM;
+		}
+	}
+
+	qoriq_pm_ops = &mpc85xx_pm_ops;
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 50dcc00a0f5a..3f4dad133338 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -26,8 +26,8 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6b107cea1c08..fe9f19e5e935 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -2,7 +2,7 @@
  * Author: Andy Fleming <afleming@freescale.com>
  * 	   Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc.
+ * Copyright 2006-2008, 2011-2012, 2015 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
 #include <linux/kexec.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>
@@ -29,6 +28,7 @@
 #include <asm/dbell.h>
 #include <asm/code-patching.h>
 #include <asm/cputhreads.h>
+#include <asm/fsl_pm.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
@@ -43,35 +43,23 @@ struct epapr_spin_table {
 	u32	pir;
 };
 
-static struct ccsr_guts __iomem *guts;
+#ifdef CONFIG_HOTPLUG_CPU
 static u64 timebase;
 static int tb_req;
 static int tb_valid;
 
-static void mpc85xx_timebase_freeze(int freeze)
-{
-	uint32_t mask;
-
-	mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
-	if (freeze)
-		setbits32(&guts->devdisr, mask);
-	else
-		clrbits32(&guts->devdisr, mask);
-
-	in_be32(&guts->devdisr);
-}
-
 static void mpc85xx_give_timebase(void)
 {
 	unsigned long flags;
 
 	local_irq_save(flags);
+	hard_irq_disable();
 
 	while (!tb_req)
 		barrier();
 	tb_req = 0;
 
-	mpc85xx_timebase_freeze(1);
+	qoriq_pm_ops->freeze_time_base(true);
 #ifdef CONFIG_PPC64
 	/*
 	 * e5500/e6500 have a workaround for erratum A-006958 in place
@@ -104,7 +92,7 @@ static void mpc85xx_give_timebase(void)
 	while (tb_valid)
 		barrier();
 
-	mpc85xx_timebase_freeze(0);
+	qoriq_pm_ops->freeze_time_base(false);
 
 	local_irq_restore(flags);
 }
@@ -114,6 +102,7 @@ static void mpc85xx_take_timebase(void)
 	unsigned long flags;
 
 	local_irq_save(flags);
+	hard_irq_disable();
 
 	tb_req = 1;
 	while (!tb_valid)
@@ -126,36 +115,54 @@ static void mpc85xx_take_timebase(void)
 	local_irq_restore(flags);
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
 static void smp_85xx_mach_cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
-	u32 tmp;
 
 	local_irq_disable();
+	hard_irq_disable();
+	/* mask all irqs to prevent cpu wakeup */
+	qoriq_pm_ops->irq_mask(cpu);
+
 	idle_task_exit();
-	generic_set_cpu_dead(cpu);
-	mb();
 
 	mtspr(SPRN_TCR, 0);
+	mtspr(SPRN_TSR, mfspr(SPRN_TSR));
 
-	__flush_disable_L1();
-	tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
-	mtspr(SPRN_HID0, tmp);
-	isync();
+	generic_set_cpu_dead(cpu);
 
-	/* Enter NAP mode. */
-	tmp = mfmsr();
-	tmp |= MSR_WE;
-	mb();
-	mtmsr(tmp);
-	isync();
+	cur_cpu_spec->cpu_down_flush();
+
+	qoriq_pm_ops->cpu_die(cpu);
 
 	while (1)
 		;
 }
+
+static void qoriq_cpu_kill(unsigned int cpu)
+{
+	int i;
+
+	for (i = 0; i < 500; i++) {
+		if (is_cpu_dead(cpu)) {
+#ifdef CONFIG_PPC64
+			paca[cpu].cpu_start = 0;
+#endif
+			return;
+		}
+		msleep(20);
+	}
+	pr_err("CPU%d didn't die...\n", cpu);
+}
 #endif
 
+/*
+ * To keep it compatible with old boot program which uses
+ * cache-inhibit spin table, we need to flush the cache
+ * before accessing spin table to invalidate any staled data.
+ * We also need to flush the cache after writing to spin
+ * table to push data out.
+ */
 static inline void flush_spin_table(void *spin_table)
 {
 	flush_dcache_range((ulong)spin_table,
@@ -173,78 +180,28 @@ static inline u32 read_spin_table_addr_l(void *spin_table)
 static void wake_hw_thread(void *info)
 {
 	void fsl_secondary_thread_init(void);
-	unsigned long imsr, inia;
-	int nr = *(const int *)info;
+	unsigned long inia;
+	int cpu = *(const int *)info;
 
-	imsr = MSR_KERNEL;
 	inia = *(unsigned long *)fsl_secondary_thread_init;
-
-	if (cpu_thread_in_core(nr) == 0) {
-		/* For when we boot on a secondary thread with kdump */
-		mttmr(TMRN_IMSR0, imsr);
-		mttmr(TMRN_INIA0, inia);
-		mtspr(SPRN_TENS, TEN_THREAD(0));
-	} else {
-		mttmr(TMRN_IMSR1, imsr);
-		mttmr(TMRN_INIA1, inia);
-		mtspr(SPRN_TENS, TEN_THREAD(1));
-	}
-
-	smp_generic_kick_cpu(nr);
+	book3e_start_thread(cpu_thread_in_core(cpu), inia);
 }
 #endif
 
-static int smp_85xx_kick_cpu(int nr)
+static int smp_85xx_start_cpu(int cpu)
 {
-	unsigned long flags;
-	const u64 *cpu_rel_addr;
-	__iomem struct epapr_spin_table *spin_table;
+	int ret = 0;
 	struct device_node *np;
-	int hw_cpu = get_hard_smp_processor_id(nr);
+	const u64 *cpu_rel_addr;
+	unsigned long flags;
 	int ioremappable;
-	int ret = 0;
-
-	WARN_ON(nr < 0 || nr >= NR_CPUS);
-	WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
-
-	pr_debug("smp_85xx_kick_cpu: kick CPU #%d\n", nr);
-
-#ifdef CONFIG_PPC64
-	/* Threads don't use the spin table */
-	if (cpu_thread_in_core(nr) != 0) {
-		int primary = cpu_first_thread_sibling(nr);
-
-		if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
-			return -ENOENT;
-
-		if (cpu_thread_in_core(nr) != 1) {
-			pr_err("%s: cpu %d: invalid hw thread %d\n",
-			       __func__, nr, cpu_thread_in_core(nr));
-			return -ENOENT;
-		}
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	struct epapr_spin_table __iomem *spin_table;
 
-		if (!cpu_online(primary)) {
-			pr_err("%s: cpu %d: primary %d not online\n",
-			       __func__, nr, primary);
-			return -ENOENT;
-		}
-
-		smp_call_function_single(primary, wake_hw_thread, &nr, 0);
-		return 0;
-	} else if (cpu_thread_in_core(boot_cpuid) != 0 &&
-		   cpu_first_thread_sibling(boot_cpuid) == nr) {
-		if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
-			return -ENOENT;
-
-		smp_call_function_single(boot_cpuid, wake_hw_thread, &nr, 0);
-	}
-#endif
-
-	np = of_get_cpu_node(nr, NULL);
+	np = of_get_cpu_node(cpu, NULL);
 	cpu_rel_addr = of_get_property(np, "cpu-release-addr", NULL);
-
-	if (cpu_rel_addr == NULL) {
-		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
+	if (!cpu_rel_addr) {
+		pr_err("No cpu-release-addr for cpu %d\n", cpu);
 		return -ENOENT;
 	}
 
@@ -264,28 +221,18 @@ static int smp_85xx_kick_cpu(int nr)
 		spin_table = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
-#ifdef CONFIG_PPC32
-#ifdef CONFIG_HOTPLUG_CPU
-	/* Corresponding to generic_set_cpu_dead() */
-	generic_set_cpu_up(nr);
+	hard_irq_disable();
 
-	if (system_state == SYSTEM_RUNNING) {
-		/*
-		 * To keep it compatible with old boot program which uses
-		 * cache-inhibit spin table, we need to flush the cache
-		 * before accessing spin table to invalidate any staled data.
-		 * We also need to flush the cache after writing to spin
-		 * table to push data out.
-		 */
-		flush_spin_table(spin_table);
-		out_be32(&spin_table->addr_l, 0);
-		flush_spin_table(spin_table);
+	if (qoriq_pm_ops)
+		qoriq_pm_ops->cpu_up_prepare(cpu);
 
+	/* if cpu is not spinning, reset it */
+	if (read_spin_table_addr_l(spin_table) != 1) {
 		/*
 		 * We don't set the BPTR register here since it already points
 		 * to the boot page properly.
 		 */
-		mpic_reset_core(nr);
+		mpic_reset_core(cpu);
 
 		/*
 		 * wait until core is ready...
@@ -295,40 +242,23 @@ static int smp_85xx_kick_cpu(int nr)
 		if (!spin_event_timeout(
 				read_spin_table_addr_l(spin_table) == 1,
 				10000, 100)) {
-			pr_err("%s: timeout waiting for core %d to reset\n",
-							__func__, hw_cpu);
-			ret = -ENOENT;
-			goto out;
+			pr_err("timeout waiting for cpu %d to reset\n",
+				hw_cpu);
+			ret = -EAGAIN;
+			goto err;
 		}
-
-		/*  clear the acknowledge status */
-		__secondary_hold_acknowledge = -1;
 	}
-#endif
-	flush_spin_table(spin_table);
-	out_be32(&spin_table->pir, hw_cpu);
-	out_be32(&spin_table->addr_l, __pa(__early_start));
-	flush_spin_table(spin_table);
-
-	/* Wait a bit for the CPU to ack. */
-	if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
-					10000, 100)) {
-		pr_err("%s: timeout waiting for core %d to ack\n",
-						__func__, hw_cpu);
-		ret = -ENOENT;
-		goto out;
-	}
-out:
-#else
-	smp_generic_kick_cpu(nr);
 
 	flush_spin_table(spin_table);
 	out_be32(&spin_table->pir, hw_cpu);
+#ifdef CONFIG_PPC64
 	out_be64((u64 *)(&spin_table->addr_h),
 		__pa(ppc_function_entry(generic_secondary_smp_init)));
-	flush_spin_table(spin_table);
+#else
+	out_be32(&spin_table->addr_l, __pa(__early_start));
 #endif
-
+	flush_spin_table(spin_table);
+err:
 	local_irq_restore(flags);
 
 	if (ioremappable)
@@ -337,6 +267,81 @@ out:
 	return ret;
 }
 
+static int smp_85xx_kick_cpu(int nr)
+{
+	int ret = 0;
+#ifdef CONFIG_PPC64
+	int primary = nr;
+#endif
+
+	WARN_ON(nr < 0 || nr >= num_possible_cpus());
+
+	pr_debug("kick CPU #%d\n", nr);
+
+#ifdef CONFIG_PPC64
+	if (threads_per_core == 2) {
+		if (WARN_ON_ONCE(!cpu_has_feature(CPU_FTR_SMT)))
+			return -ENOENT;
+
+		booting_thread_hwid = cpu_thread_in_core(nr);
+		primary = cpu_first_thread_sibling(nr);
+
+		if (qoriq_pm_ops)
+			qoriq_pm_ops->cpu_up_prepare(nr);
+
+		/*
+		 * If either thread in the core is online, use it to start
+		 * the other.
+		 */
+		if (cpu_online(primary)) {
+			smp_call_function_single(primary,
+					wake_hw_thread, &nr, 1);
+			goto done;
+		} else if (cpu_online(primary + 1)) {
+			smp_call_function_single(primary + 1,
+					wake_hw_thread, &nr, 1);
+			goto done;
+		}
+
+		/*
+		 * If getting here, it means both threads in the core are
+		 * offline. So start the primary thread, then it will start
+		 * the thread specified in booting_thread_hwid, the one
+		 * corresponding to nr.
+		 */
+
+	} else if (threads_per_core == 1) {
+		/*
+		 * If one core has only one thread, set booting_thread_hwid to
+		 * an invalid value.
+		 */
+		booting_thread_hwid = INVALID_THREAD_HWID;
+
+	} else if (threads_per_core > 2) {
+		pr_err("Do not support more than 2 threads per CPU.");
+		return -EINVAL;
+	}
+
+	ret = smp_85xx_start_cpu(primary);
+	if (ret)
+		return ret;
+
+done:
+	paca[nr].cpu_start = 1;
+	generic_set_cpu_up(nr);
+
+	return ret;
+#else
+	ret = smp_85xx_start_cpu(nr);
+	if (ret)
+		return ret;
+
+	generic_set_cpu_up(nr);
+
+	return ret;
+#endif
+}
+
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
 	.cpu_bootable = smp_generic_cpu_bootable,
@@ -359,7 +364,7 @@ void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
 	local_irq_disable();
 
 	if (secondary) {
-		__flush_disable_L1();
+		cur_cpu_spec->cpu_down_flush();
 		atomic_inc(&kexec_down_cpus);
 		/* loop forever */
 		while (1);
@@ -467,16 +472,6 @@ static void smp_85xx_setup_cpu(int cpu_nr)
 	smp_85xx_basic_setup(cpu_nr);
 }
 
-static const struct of_device_id mpc85xx_smp_guts_ids[] = {
-	{ .compatible = "fsl,mpc8572-guts", },
-	{ .compatible = "fsl,p1020-guts", },
-	{ .compatible = "fsl,p1021-guts", },
-	{ .compatible = "fsl,p1022-guts", },
-	{ .compatible = "fsl,p1023-guts", },
-	{ .compatible = "fsl,p2020-guts", },
-	{},
-};
-
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
@@ -500,22 +495,21 @@ void __init mpc85xx_smp_init(void)
 		smp_85xx_ops.probe = NULL;
 	}
 
-	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
-	if (np) {
-		guts = of_iomap(np, 0);
-		of_node_put(np);
-		if (!guts) {
-			pr_err("%s: Could not map guts node address\n",
-								__func__);
-			return;
-		}
+#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_FSL_CORENET_RCPM
+	fsl_rcpm_init();
+#endif
+
+#ifdef CONFIG_FSL_PMC
+	mpc85xx_setup_pmc();
+#endif
+	if (qoriq_pm_ops) {
 		smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
 		smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
-#ifdef CONFIG_HOTPLUG_CPU
 		ppc_md.cpu_die = smp_85xx_mach_cpu_die;
-#endif
+		smp_85xx_ops.cpu_die = qoriq_cpu_kill;
 	}
-
+#endif
 	smp_ops = &smp_85xx_ops;
 
 #ifdef CONFIG_KEXEC
diff --git a/arch/powerpc/platforms/85xx/smp.h b/arch/powerpc/platforms/85xx/smp.h
index e2b44933ff19..0b20ae315c53 100644
--- a/arch/powerpc/platforms/85xx/smp.h
+++ b/arch/powerpc/platforms/85xx/smp.h
@@ -5,6 +5,7 @@
 
 #ifdef CONFIG_SMP
 void __init mpc85xx_smp_init(void);
+int __init mpc85xx_setup_pmc(void);
 #else
 static inline void mpc85xx_smp_init(void)
 {
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 892e613519cc..71bc255b4324 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -22,8 +22,8 @@
 #include <asm/pci-bridge.h>
 #include <asm/udbg.h>
 #include <asm/mpic.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
+#include <soc/fsl/qe/qe_ic.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index ede815d6489d..2d889ad7dc89 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the PowerPC 86xx linux kernel.
 #
 
-obj-y				:= pic.o
+obj-y				:= pic.o common.o
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
diff --git a/arch/powerpc/platforms/86xx/common.c b/arch/powerpc/platforms/86xx/common.c
new file mode 100644
index 000000000000..0f7b7fcf1ba2
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/common.c
@@ -0,0 +1,43 @@
+/*
+ * Routines common to most mpc86xx-based boards.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of_platform.h>
+#include <asm/synch.h>
+
+#include "mpc86xx.h"
+
+static const struct of_device_id mpc86xx_common_ids[] __initconst = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .name = "localbus", },
+	{ .compatible = "gianfar", },
+	{ .compatible = "fsl,mpc8641-pcie", },
+	{},
+};
+
+int __init mpc86xx_common_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc86xx_common_ids, NULL);
+}
+
+long __init mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	isync();
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index bf17933b20f3..8e63b752712c 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -197,37 +197,7 @@ static int __init gef_ppc9a_probe(void)
 	return 0;
 }
 
-static long __init mpc86xx_time_init(void)
-{
-	unsigned int temp;
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	temp = mfspr(SPRN_HID0);
-	temp |= HID0_TBEN;
-	mtspr(SPRN_HID0, temp);
-	asm volatile("isync");
-
-	return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "fsl,mpc8641-pcie", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	printk(KERN_DEBUG "Probe platform devices\n");
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_arch_initcall(gef_ppc9a, declare_of_platform_devices);
+machine_arch_initcall(gef_ppc9a, mpc86xx_common_publish_devices);
 
 define_machine(gef_ppc9a) {
 	.name			= "GE PPC9A",
diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c
index 8facf5873866..0e0be94f551f 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc310.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc310.c
@@ -184,37 +184,7 @@ static int __init gef_sbc310_probe(void)
 	return 0;
 }
 
-static long __init mpc86xx_time_init(void)
-{
-	unsigned int temp;
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	temp = mfspr(SPRN_HID0);
-	temp |= HID0_TBEN;
-	mtspr(SPRN_HID0, temp);
-	asm volatile("isync");
-
-	return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "fsl,mpc8641-pcie", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	printk(KERN_DEBUG "Probe platform devices\n");
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_arch_initcall(gef_sbc310, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc310, mpc86xx_common_publish_devices);
 
 define_machine(gef_sbc310) {
 	.name			= "GE SBC310",
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c
index 8c9058df5642..e8292b492d7e 100644
--- a/arch/powerpc/platforms/86xx/gef_sbc610.c
+++ b/arch/powerpc/platforms/86xx/gef_sbc610.c
@@ -174,37 +174,7 @@ static int __init gef_sbc610_probe(void)
 	return 0;
 }
 
-static long __init mpc86xx_time_init(void)
-{
-	unsigned int temp;
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	temp = mfspr(SPRN_HID0);
-	temp |= HID0_TBEN;
-	mtspr(SPRN_HID0, temp);
-	asm volatile("isync");
-
-	return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "fsl,mpc8641-pcie", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	printk(KERN_DEBUG "Probe platform devices\n");
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_arch_initcall(gef_sbc610, declare_of_platform_devices);
+machine_arch_initcall(gef_sbc610, mpc86xx_common_publish_devices);
 
 define_machine(gef_sbc610) {
 	.name			= "GE SBC610",
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 437a9c372ae1..957473e5c8e5 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -88,12 +88,10 @@ static inline void mpc8610_suspend_init(void) { }
 static const struct of_device_id mpc8610_ids[] __initconst = {
 	{ .compatible = "fsl,mpc8610-immr", },
 	{ .compatible = "fsl,mpc8610-guts", },
-	{ .compatible = "simple-bus", },
 	/* So that the DMA channel nodes can be probed individually: */
 	{ .compatible = "fsl,eloplus-dma", },
 	/* PCI controllers */
 	{ .compatible = "fsl,mpc8610-pci", },
-	{ .compatible = "fsl,mpc8641-pcie", },
 	{}
 };
 
@@ -105,6 +103,8 @@ static int __init mpc8610_declare_of_platform_devices(void)
 	/* Enable wakeup on PIXIS' event IRQ. */
 	mpc8610_suspend_init();
 
+	mpc86xx_common_publish_devices();
+
 	/* Without this call, the SSI device driver won't get probed. */
 	of_platform_bus_probe(NULL, mpc8610_ids, NULL);
 
@@ -327,22 +327,6 @@ static int __init mpc86xx_hpcd_probe(void)
 	return 0;
 }
 
-static long __init mpc86xx_time_init(void)
-{
-	unsigned int temp;
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	temp = mfspr(SPRN_HID0);
-	temp |= HID0_TBEN;
-	mtspr(SPRN_HID0, temp);
-	asm volatile("isync");
-
-	return 0;
-}
-
 define_machine(mpc86xx_hpcd) {
 	.name			= "MPC86xx HPCD",
 	.probe			= mpc86xx_hpcd_probe,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index 08efb57559d1..53500db6b644 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -17,5 +17,7 @@
 
 extern void mpc86xx_smp_init(void);
 extern void mpc86xx_init_irq(void);
+extern long mpc86xx_time_init(void);
+extern int mpc86xx_common_publish_devices(void);
 
 #endif	/* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 07ccb1b0cc7d..e5084811b9c6 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -110,33 +110,14 @@ static int __init mpc86xx_hpcn_probe(void)
 	return 0;
 }
 
-static long __init
-mpc86xx_time_init(void)
-{
-	unsigned int temp;
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	temp = mfspr(SPRN_HID0);
-	temp |= HID0_TBEN;
-	mtspr(SPRN_HID0, temp);
-	asm volatile("isync");
-
-	return 0;
-}
-
 static const struct of_device_id of_bus_ids[] __initconst = {
-	{ .compatible = "simple-bus", },
 	{ .compatible = "fsl,srio", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "fsl,mpc8641-pcie", },
 	{},
 };
 
 static int __init declare_of_platform_devices(void)
 {
+	mpc86xx_common_publish_devices();
 	of_platform_bus_probe(NULL, of_bus_ids, NULL);
 
 	return 0;
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 6810b71d54a7..2a9cf278c12a 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -75,37 +75,7 @@ static int __init sbc8641_probe(void)
 	return 0;
 }
 
-static long __init
-mpc86xx_time_init(void)
-{
-	unsigned int temp;
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	temp = mfspr(SPRN_HID0);
-	temp |= HID0_TBEN;
-	mtspr(SPRN_HID0, temp);
-	asm volatile("isync");
-
-	return 0;
-}
-
-static const struct of_device_id of_bus_ids[] __initconst = {
-	{ .compatible = "simple-bus", },
-	{ .compatible = "gianfar", },
-	{ .compatible = "fsl,mpc8641-pcie", },
-	{},
-};
-
-static int __init declare_of_platform_devices(void)
-{
-	of_platform_bus_probe(NULL, of_bus_ids, NULL);
-
-	return 0;
-}
-machine_arch_initcall(sbc8641, declare_of_platform_devices);
+machine_arch_initcall(sbc8641, mpc86xx_common_publish_devices);
 
 define_machine(sbc8641) {
 	.name			= "SBC8641D",
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index b7f9c408bf24..46a3533d3acb 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -272,17 +272,6 @@ config TAU_AVERAGE
 
 	  If in doubt, say N here.
 
-config QUICC_ENGINE
-	bool "Freescale QUICC Engine (QE) Support"
-	depends on FSL_SOC && PPC32
-	select PPC_LIB_RHEAP
-	select CRC32
-	help
-	  The QUICC Engine (QE) is a new generation of communications
-	  coprocessors on Freescale embedded CPUs (akin to CPM in older chips).
-	  Selecting this option means that you wish to build a kernel
-	  for a machine with a QE coprocessor.
-
 config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
@@ -295,7 +284,6 @@ config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
 	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
-	select PPC_LIB_RHEAP
 	select PPC_PCI_CHOICE
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -325,6 +313,7 @@ config FSL_ULI1575
 
 config CPM
 	bool
+	select GENERIC_ALLOCATOR
 
 config OF_RTC
 	bool
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 429fc59d2a47..d9088f0b8fcc 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -33,11 +33,6 @@ config PPC_IBM_CELL_BLADE
 	select PPC_UDBG_16550
 	select UDBG_RTAS_CONSOLE
 
-config PPC_CELL_QPACE
-	bool "IBM Cell - QPACE"
-	depends on PPC64 && PPC_BOOK3S && CPU_BIG_ENDIAN
-	select PPC_CELL_COMMON
-
 config AXON_MSI
 	bool
 	depends on PPC_IBM_CELL_BLADE && PCI_MSI
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index 34699bddfddd..00464305763d 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CELL_NATIVE)		+= smp.o
-obj-$(CONFIG_PPC_CELL_QPACE)		+= smp.o
 endif
 
 # needed only when building loadable spufs.ko
@@ -26,6 +25,3 @@ obj-$(CONFIG_SPU_BASE)			+= spu_callbacks.o spu_base.o \
 					   spufs/
 
 obj-$(CONFIG_AXON_MSI)			+= axon_msi.o
-
-# qpace setup
-obj-$(CONFIG_PPC_CELL_QPACE)		+= qpace_setup.o
diff --git a/arch/powerpc/platforms/cell/qpace_setup.c b/arch/powerpc/platforms/cell/qpace_setup.c
deleted file mode 100644
index d328140dc6f5..000000000000
--- a/arch/powerpc/platforms/cell/qpace_setup.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- *  linux/arch/powerpc/platforms/cell/qpace_setup.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified by PPC64 Team, IBM Corp
- *  Modified by Cell Team, IBM Deutschland Entwicklung GmbH
- *  Modified by Benjamin Krill <ben@codiert.org>, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/export.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/console.h>
-#include <linux/of_platform.h>
-
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/kexec.h>
-#include <asm/pgtable.h>
-#include <asm/prom.h>
-#include <asm/rtas.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/cputable.h>
-#include <asm/irq.h>
-#include <asm/spu.h>
-#include <asm/spu_priv1.h>
-#include <asm/udbg.h>
-#include <asm/cell-regs.h>
-
-#include "interrupt.h"
-#include "pervasive.h"
-#include "ras.h"
-
-static void qpace_show_cpuinfo(struct seq_file *m)
-{
-	struct device_node *root;
-	const char *model = "";
-
-	root = of_find_node_by_path("/");
-	if (root)
-		model = of_get_property(root, "model", NULL);
-	seq_printf(m, "machine\t\t: CHRP %s\n", model);
-	of_node_put(root);
-}
-
-static void qpace_progress(char *s, unsigned short hex)
-{
-	printk("*** %04x : %s\n", hex, s ? s : "");
-}
-
-static const struct of_device_id qpace_bus_ids[] __initconst = {
-	{ .type = "soc", },
-	{ .compatible = "soc", },
-	{ .type = "spider", },
-	{ .type = "axon", },
-	{ .type = "plb5", },
-	{ .type = "plb4", },
-	{ .type = "opb", },
-	{ .type = "ebc", },
-	{},
-};
-
-static int __init qpace_publish_devices(void)
-{
-	int node;
-
-	/* Publish OF platform devices for southbridge IOs */
-	of_platform_bus_probe(NULL, qpace_bus_ids, NULL);
-
-	/* There is no device for the MIC memory controller, thus we create
-	 * a platform device for it to attach the EDAC driver to.
-	 */
-	for_each_online_node(node) {
-		if (cbe_get_cpu_mic_tm_regs(cbe_node_to_cpu(node)) == NULL)
-			continue;
-		platform_device_register_simple("cbe-mic", node, NULL, 0);
-	}
-
-	return 0;
-}
-machine_subsys_initcall(qpace, qpace_publish_devices);
-
-static void __init qpace_setup_arch(void)
-{
-#ifdef CONFIG_SPU_BASE
-	spu_priv1_ops = &spu_priv1_mmio_ops;
-	spu_management_ops = &spu_management_of_ops;
-#endif
-
-	cbe_regs_init();
-
-#ifdef CONFIG_CBE_RAS
-	cbe_ras_init();
-#endif
-
-#ifdef CONFIG_SMP
-	smp_init_cell();
-#endif
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	cbe_pervasive_init();
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-}
-
-static int __init qpace_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "IBM,QPACE"))
-		return 0;
-
-	hpte_init_native();
-	pm_power_off = rtas_power_off;
-
-	return 1;
-}
-
-define_machine(qpace) {
-	.name			= "QPACE",
-	.probe			= qpace_probe,
-	.setup_arch		= qpace_setup_arch,
-	.show_cpuinfo		= qpace_show_cpuinfo,
-	.restart		= rtas_restart,
-	.halt			= rtas_halt,
-	.get_boot_time		= rtas_get_boot_time,
-	.get_rtc_time		= rtas_get_rtc_time,
-	.set_rtc_time		= rtas_set_rtc_time,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= qpace_progress,
-	.init_IRQ		= iic_init_IRQ,
-};
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 5038fd578e65..2936a0044c04 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1799,9 +1799,9 @@ static int spufs_mfc_fsync(struct file *file, loff_t start, loff_t end, int data
 	struct inode *inode = file_inode(file);
 	int err = filemap_write_and_wait_range(inode->i_mapping, start, end);
 	if (!err) {
-		mutex_lock(&inode->i_mutex);
+		inode_lock(inode);
 		err = spufs_mfc_flush(file, NULL);
-		mutex_unlock(&inode->i_mutex);
+		inode_unlock(inode);
 	}
 	return err;
 }
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 11634fa7ab3c..6ca5f0525e57 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -163,7 +163,7 @@ static void spufs_prune_dir(struct dentry *dir)
 {
 	struct dentry *dentry, *tmp;
 
-	mutex_lock(&d_inode(dir)->i_mutex);
+	inode_lock(d_inode(dir));
 	list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_child) {
 		spin_lock(&dentry->d_lock);
 		if (simple_positive(dentry)) {
@@ -180,7 +180,7 @@ static void spufs_prune_dir(struct dentry *dir)
 		}
 	}
 	shrink_dcache_parent(dir);
-	mutex_unlock(&d_inode(dir)->i_mutex);
+	inode_unlock(d_inode(dir));
 }
 
 /* Caller must hold parent->i_mutex */
@@ -225,9 +225,9 @@ static int spufs_dir_close(struct inode *inode, struct file *file)
 	parent = d_inode(dir->d_parent);
 	ctx = SPUFS_I(d_inode(dir))->i_ctx;
 
-	mutex_lock_nested(&parent->i_mutex, I_MUTEX_PARENT);
+	inode_lock_nested(parent, I_MUTEX_PARENT);
 	ret = spufs_rmdir(parent, dir);
-	mutex_unlock(&parent->i_mutex);
+	inode_unlock(parent);
 	WARN_ON(ret);
 
 	return dcache_dir_close(inode, file);
@@ -270,7 +270,7 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
 	inode->i_op = &simple_dir_inode_operations;
 	inode->i_fop = &simple_dir_operations;
 
-	mutex_lock(&inode->i_mutex);
+	inode_lock(inode);
 
 	dget(dentry);
 	inc_nlink(dir);
@@ -291,7 +291,7 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
 	if (ret)
 		spufs_rmdir(dir, dentry);
 
-	mutex_unlock(&inode->i_mutex);
+	inode_unlock(inode);
 
 	return ret;
 }
@@ -732,8 +732,8 @@ spufs_fill_super(struct super_block *sb, void *data, int silent)
 		return -ENOMEM;
 
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
-	sb->s_blocksize = PAGE_CACHE_SIZE;
-	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+	sb->s_blocksize = PAGE_SIZE;
+	sb->s_blocksize_bits = PAGE_SHIFT;
 	sb->s_magic = SPUFS_MAGIC;
 	sb->s_op = &s_ops;
 	sb->s_fs_info = info;
@@ -767,7 +767,7 @@ static int __init spufs_init(void)
 	ret = -ENOMEM;
 	spufs_inode_cache = kmem_cache_create("spufs_inode_cache",
 			sizeof(struct spufs_inode_info), 0,
-			SLAB_HWCACHE_ALIGN, spufs_init_once);
+			SLAB_HWCACHE_ALIGN|SLAB_ACCOUNT, spufs_init_once);
 
 	if (!spufs_inode_cache)
 		goto out;
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 4ddf769a64e5..9f79004e6d6f 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -326,7 +326,7 @@ static int spu_process_callback(struct spu_context *ctx)
 	spu_ret = -ENOSYS;
 	npc += 4;
 
-	if (s.nr_ret < __NR_syscalls) {
+	if (s.nr_ret < NR_syscalls) {
 		spu_release(ctx);
 		/* do actual system call from here */
 		spu_ret = spu_sys_callback(&s);
diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h
index b290b63661f1..5ad12023e562 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc10x.h
+++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h
@@ -24,13 +24,11 @@
  *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
  *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
  *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
  *
  * MAP B (CHRP Map)
  *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
  *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
  *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
  */
 
 /*
@@ -138,14 +136,6 @@
 #define MPC10X_EUMB_WP_OFFSET		0x000ff000 /* Data path diagnostic, watchpoint reg offset */
 #define MPC10X_EUMB_WP_SIZE		0x00001000 /* Data path diagnostic, watchpoint reg size */
 
-/*
- * Define some recommended places to put the EUMB regs.
- * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff.
- */
-extern unsigned long			ioremap_base;
-#define	MPC10X_MAPA_EUMB_BASE		(ioremap_base - MPC10X_EUMB_SIZE)
-#define	MPC10X_MAPB_EUMB_BASE		MPC10X_MAPA_EUMB_BASE
-
 enum ppc_sys_devices {
 	MPC10X_IIC1,
 	MPC10X_DMA0,
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index b4a369dac3a8..81799d70a1ee 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -77,7 +77,7 @@ void maple_get_rtc_time(struct rtc_time *tm)
 	if ((tm->tm_year + 1900) < 1970)
 		tm->tm_year += 100;
 
-	GregorianDay(tm);
+	tm->tm_wday = -1;
 }
 
 int maple_set_rtc_time(struct rtc_time *tm)
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index ae3f47b25b18..ddf635000c6b 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -41,7 +41,6 @@ static void __iomem *gpio_regs;
 struct gpio_priv {
 	int mdc_pin;
 	int mdio_pin;
-	int mdio_irqs[PHY_MAX_ADDR];
 };
 
 #define MDC_PIN(bus)	(((struct gpio_priv *)bus->priv)->mdc_pin)
@@ -245,8 +244,6 @@ static int gpio_mdio_probe(struct platform_device *ofdev)
 	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
 	new_bus->priv = priv;
 
-	new_bus->irq = priv->mdio_irqs;
-
 	prop = of_get_property(np, "mdc-pin", NULL);
 	priv->mdc_pin = *prop;
 
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 52c6ce1cc985..1eb7b45e017d 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -2,7 +2,7 @@ CFLAGS_bootx_init.o  		+= -fPIC
 
 ifdef CONFIG_FUNCTION_TRACER
 # Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_bootx_init.o = -mno-sched-epilog $(CC_FLAGS_FTRACE)
 endif
 
 obj-y				+= pic.o setup.o time.o feature.o pci.o \
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 76f5013c35e5..c3c9bbb3573a 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -84,6 +84,7 @@ static void __init bootx_printf(const char *format, ...)
 			break;
 		}
 	}
+	va_end(args);
 }
 #else /* CONFIG_BOOTX_TEXT */
 static void __init bootx_printf(const char *format, ...) {}
diff --git a/arch/powerpc/platforms/powermac/cache.S b/arch/powerpc/platforms/powermac/cache.S
index 6be1a4af3359..cc5347eb1662 100644
--- a/arch/powerpc/platforms/powermac/cache.S
+++ b/arch/powerpc/platforms/powermac/cache.S
@@ -23,7 +23,7 @@
  * when going to sleep, when doing a PMU based cpufreq transition,
  * or when "offlining" a CPU on SMP machines. This code is over
  * paranoid, but I've had enough issues with various CPU revs and
- * bugs that I decided it was worth beeing over cautious
+ * bugs that I decided it was worth being over cautious
  */
 
 _GLOBAL(flush_disable_caches)
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 4882bfd90e27..1e02328c3f2d 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -198,7 +198,7 @@ static long ohare_htw_scc_enable(struct device_node *node, long param,
 			if (htw) {
 				/* Side effect: this will also power up the
 				 * modem, but it's too messy to figure out on which
-				 * ports this controls the tranceiver and on which
+				 * ports this controls the transceiver and on which
 				 * it controls the modem
 				 */
 				if (trans)
@@ -463,7 +463,7 @@ static long heathrow_sound_enable(struct device_node *node, long param,
 	unsigned long		flags;
 
 	/* B&W G3 and Yikes don't support that properly (the
-	 * sound appear to never come back after beeing shut down).
+	 * sound appear to never come back after being shut down).
 	 */
 	if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
 	    pmac_mb.model_id == PMAC_TYPE_YIKES)
@@ -2770,7 +2770,7 @@ set_initial_features(void)
 	 * but I'm not too sure it was audited for side-effects on other
 	 * ohare based machines...
 	 * Since I still have difficulties figuring the right way to
-	 * differenciate them all and since that hack was there for a long
+	 * differentiate them all and since that hack was there for a long
 	 * time, I'll keep it around
 	 */
 	if (macio_chips[0].type == macio_ohare) {
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 6f4f8b060def..981546345033 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -258,13 +258,14 @@ static unsigned int pmac_pic_get_irq(void)
 #ifdef CONFIG_XMON
 static struct irqaction xmon_action = {
 	.handler	= xmon_irq,
-	.flags		= 0,
+	.flags		= IRQF_NO_THREAD,
 	.name		= "NMI - XMON"
 };
 #endif
 
 static struct irqaction gatwick_cascade_action = {
 	.handler	= gatwick_action,
+	.flags		= IRQF_NO_THREAD,
 	.name		= "cascade",
 };
 
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 1c8cdb6250e7..cd9711e72df6 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,9 +2,10 @@ obj-y			+= setup.o opal-wrappers.o opal.o opal-async.o idle.o
 obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
 obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
+obj-y			+= opal-kmsg.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
-obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
+obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
 obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
 obj-$(CONFIG_MEMORY_FAILURE)	+= opal-memory-errors.o
diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index e1c90725522a..950b3e539057 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -48,8 +48,8 @@ static int pnv_eeh_init(void)
 	struct pci_controller *hose;
 	struct pnv_phb *phb;
 
-	if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
-		pr_warn("%s: OPALv3 is required !\n",
+	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
+		pr_warn("%s: OPAL is required !\n",
 			__func__);
 		return -EINVAL;
 	}
@@ -167,42 +167,26 @@ static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val)
 	return 0;
 }
 
-static int pnv_eeh_outb_dbgfs_set(void *data, u64 val)
-{
-	return pnv_eeh_dbgfs_set(data, 0xD10, val);
-}
-
-static int pnv_eeh_outb_dbgfs_get(void *data, u64 *val)
-{
-	return pnv_eeh_dbgfs_get(data, 0xD10, val);
-}
-
-static int pnv_eeh_inbA_dbgfs_set(void *data, u64 val)
-{
-	return pnv_eeh_dbgfs_set(data, 0xD90, val);
-}
-
-static int pnv_eeh_inbA_dbgfs_get(void *data, u64 *val)
-{
-	return pnv_eeh_dbgfs_get(data, 0xD90, val);
-}
-
-static int pnv_eeh_inbB_dbgfs_set(void *data, u64 val)
-{
-	return pnv_eeh_dbgfs_set(data, 0xE10, val);
-}
+#define PNV_EEH_DBGFS_ENTRY(name, reg)				\
+static int pnv_eeh_dbgfs_set_##name(void *data, u64 val)	\
+{								\
+	return pnv_eeh_dbgfs_set(data, reg, val);		\
+}								\
+								\
+static int pnv_eeh_dbgfs_get_##name(void *data, u64 *val)	\
+{								\
+	return pnv_eeh_dbgfs_get(data, reg, val);		\
+}								\
+								\
+DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_dbgfs_ops_##name,		\
+			pnv_eeh_dbgfs_get_##name,		\
+                        pnv_eeh_dbgfs_set_##name,		\
+			"0x%llx\n")
+
+PNV_EEH_DBGFS_ENTRY(outb, 0xD10);
+PNV_EEH_DBGFS_ENTRY(inbA, 0xD90);
+PNV_EEH_DBGFS_ENTRY(inbB, 0xE10);
 
-static int pnv_eeh_inbB_dbgfs_get(void *data, u64 *val)
-{
-	return pnv_eeh_dbgfs_get(data, 0xE10, val);
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_outb_dbgfs_ops, pnv_eeh_outb_dbgfs_get,
-			pnv_eeh_outb_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbA_dbgfs_ops, pnv_eeh_inbA_dbgfs_get,
-			pnv_eeh_inbA_dbgfs_set, "0x%llx\n");
-DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_inbB_dbgfs_ops, pnv_eeh_inbB_dbgfs_get,
-			pnv_eeh_inbB_dbgfs_set, "0x%llx\n");
 #endif /* CONFIG_DEBUG_FS */
 
 /**
@@ -268,13 +252,13 @@ static int pnv_eeh_post_init(void)
 
 		debugfs_create_file("err_injct_outbound", 0600,
 				    phb->dbgfs, hose,
-				    &pnv_eeh_outb_dbgfs_ops);
+				    &pnv_eeh_dbgfs_ops_outb);
 		debugfs_create_file("err_injct_inboundA", 0600,
 				    phb->dbgfs, hose,
-				    &pnv_eeh_inbA_dbgfs_ops);
+				    &pnv_eeh_dbgfs_ops_inbA);
 		debugfs_create_file("err_injct_inboundB", 0600,
 				    phb->dbgfs, hose,
-				    &pnv_eeh_inbB_dbgfs_ops);
+				    &pnv_eeh_dbgfs_ops_inbB);
 #endif /* CONFIG_DEBUG_FS */
 	}
 
@@ -387,6 +371,7 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	edev->mode	&= 0xFFFFFF00;
 	edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
 	edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
+	edev->af_cap   = pnv_eeh_find_cap(pdn, PCI_CAP_ID_AF);
 	edev->aer_cap  = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
 	if ((edev->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) {
 		edev->mode |= EEH_DEV_BRIDGE;
@@ -444,9 +429,12 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data)
 	 * PCI devices of the PE are expected to be removed prior
 	 * to PE reset.
 	 */
-	if (!edev->pe->bus)
+	if (!(edev->pe->state & EEH_PE_PRI_BUS)) {
 		edev->pe->bus = pci_find_bus(hose->global_number,
 					     pdn->busno);
+		if (edev->pe->bus)
+			edev->pe->state |= EEH_PE_PRI_BUS;
+	}
 
 	/*
 	 * Enable EEH explicitly so that we will do EEH check
@@ -892,6 +880,120 @@ void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
 	}
 }
 
+static void pnv_eeh_wait_for_pending(struct pci_dn *pdn, const char *type,
+				     int pos, u16 mask)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	int i, status = 0;
+
+	/* Wait for Transaction Pending bit to be cleared */
+	for (i = 0; i < 4; i++) {
+		eeh_ops->read_config(pdn, pos, 2, &status);
+		if (!(status & mask))
+			return;
+
+		msleep((1 << i) * 100);
+	}
+
+	pr_warn("%s: Pending transaction while issuing %sFLR to %04x:%02x:%02x.%01x\n",
+		__func__, type,
+		edev->phb->global_number, pdn->busno,
+		PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
+}
+
+static int pnv_eeh_do_flr(struct pci_dn *pdn, int option)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 reg = 0;
+
+	if (WARN_ON(!edev->pcie_cap))
+		return -ENOTTY;
+
+	eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCAP, 4, &reg);
+	if (!(reg & PCI_EXP_DEVCAP_FLR))
+		return -ENOTTY;
+
+	switch (option) {
+	case EEH_RESET_HOT:
+	case EEH_RESET_FUNDAMENTAL:
+		pnv_eeh_wait_for_pending(pdn, "",
+					 edev->pcie_cap + PCI_EXP_DEVSTA,
+					 PCI_EXP_DEVSTA_TRPND);
+		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				     4, &reg);
+		reg |= PCI_EXP_DEVCTL_BCR_FLR;
+		eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				      4, reg);
+		msleep(EEH_PE_RST_HOLD_TIME);
+		break;
+	case EEH_RESET_DEACTIVATE:
+		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				     4, &reg);
+		reg &= ~PCI_EXP_DEVCTL_BCR_FLR;
+		eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				      4, reg);
+		msleep(EEH_PE_RST_SETTLE_TIME);
+		break;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 cap = 0;
+
+	if (WARN_ON(!edev->af_cap))
+		return -ENOTTY;
+
+	eeh_ops->read_config(pdn, edev->af_cap + PCI_AF_CAP, 1, &cap);
+	if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
+		return -ENOTTY;
+
+	switch (option) {
+	case EEH_RESET_HOT:
+	case EEH_RESET_FUNDAMENTAL:
+		/*
+		 * Wait for Transaction Pending bit to clear. A word-aligned
+		 * test is used, so we use the conrol offset rather than status
+		 * and shift the test bit to match.
+		 */
+		pnv_eeh_wait_for_pending(pdn, "AF",
+					 edev->af_cap + PCI_AF_CTRL,
+					 PCI_AF_STATUS_TP << 8);
+		eeh_ops->write_config(pdn, edev->af_cap + PCI_AF_CTRL,
+				      1, PCI_AF_CTRL_FLR);
+		msleep(EEH_PE_RST_HOLD_TIME);
+		break;
+	case EEH_RESET_DEACTIVATE:
+		eeh_ops->write_config(pdn, edev->af_cap + PCI_AF_CTRL, 1, 0);
+		msleep(EEH_PE_RST_SETTLE_TIME);
+		break;
+	}
+
+	return 0;
+}
+
+static int pnv_eeh_reset_vf_pe(struct eeh_pe *pe, int option)
+{
+	struct eeh_dev *edev;
+	struct pci_dn *pdn;
+	int ret;
+
+	/* The VF PE should have only one child device */
+	edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, list);
+	pdn = eeh_dev_to_pdn(edev);
+	if (!pdn)
+		return -ENXIO;
+
+	ret = pnv_eeh_do_flr(pdn, option);
+	if (!ret)
+		return ret;
+
+	return pnv_eeh_do_af_flr(pdn, option);
+}
+
 /**
  * pnv_eeh_reset - Reset the specified PE
  * @pe: EEH PE
@@ -953,7 +1055,9 @@ static int pnv_eeh_reset(struct eeh_pe *pe, int option)
 		}
 
 		bus = eeh_pe_bus_get(pe);
-		if (pci_is_root_bus(bus) ||
+		if (pe->type & EEH_PE_VF)
+			ret = pnv_eeh_reset_vf_pe(pe, option);
+		else if (pci_is_root_bus(bus) ||
 			pci_is_root_bus(bus->parent))
 			ret = pnv_eeh_root_reset(hose, option);
 		else
@@ -1092,6 +1196,14 @@ static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn)
 	if (!edev || !edev->pe)
 		return false;
 
+	/*
+	 * We will issue FLR or AF FLR to all VFs, which are contained
+	 * in VF PE. It relies on the EEH PCI config accessors. So we
+	 * can't block them during the window.
+	 */
+	if (edev->physfn && (edev->pe->state & EEH_PE_RESET))
+		return false;
+
 	if (edev->pe->state & EEH_PE_CFG_BLOCKED)
 		return true;
 
@@ -1476,6 +1588,65 @@ static int pnv_eeh_next_error(struct eeh_pe **pe)
 	return ret;
 }
 
+static int pnv_eeh_restore_vf_config(struct pci_dn *pdn)
+{
+	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
+	u32 devctl, cmd, cap2, aer_capctl;
+	int old_mps;
+
+	if (edev->pcie_cap) {
+		/* Restore MPS */
+		old_mps = (ffs(pdn->mps) - 8) << 5;
+		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				     2, &devctl);
+		devctl &= ~PCI_EXP_DEVCTL_PAYLOAD;
+		devctl |= old_mps;
+		eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				      2, devctl);
+
+		/* Disable Completion Timeout */
+		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCAP2,
+				     4, &cap2);
+		if (cap2 & 0x10) {
+			eeh_ops->read_config(pdn,
+					     edev->pcie_cap + PCI_EXP_DEVCTL2,
+					     4, &cap2);
+			cap2 |= 0x10;
+			eeh_ops->write_config(pdn,
+					      edev->pcie_cap + PCI_EXP_DEVCTL2,
+					      4, cap2);
+		}
+	}
+
+	/* Enable SERR and parity checking */
+	eeh_ops->read_config(pdn, PCI_COMMAND, 2, &cmd);
+	cmd |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	eeh_ops->write_config(pdn, PCI_COMMAND, 2, cmd);
+
+	/* Enable report various errors */
+	if (edev->pcie_cap) {
+		eeh_ops->read_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				     2, &devctl);
+		devctl &= ~PCI_EXP_DEVCTL_CERE;
+		devctl |= (PCI_EXP_DEVCTL_NFERE |
+			   PCI_EXP_DEVCTL_FERE |
+			   PCI_EXP_DEVCTL_URRE);
+		eeh_ops->write_config(pdn, edev->pcie_cap + PCI_EXP_DEVCTL,
+				      2, devctl);
+	}
+
+	/* Enable ECRC generation and check */
+	if (edev->pcie_cap && edev->aer_cap) {
+		eeh_ops->read_config(pdn, edev->aer_cap + PCI_ERR_CAP,
+				     4, &aer_capctl);
+		aer_capctl |= (PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE);
+		eeh_ops->write_config(pdn, edev->aer_cap + PCI_ERR_CAP,
+				      4, aer_capctl);
+	}
+
+	return 0;
+}
+
 static int pnv_eeh_restore_config(struct pci_dn *pdn)
 {
 	struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
@@ -1485,9 +1656,21 @@ static int pnv_eeh_restore_config(struct pci_dn *pdn)
 	if (!edev)
 		return -EEXIST;
 
-	phb = edev->phb->private_data;
-	ret = opal_pci_reinit(phb->opal_id,
-			      OPAL_REINIT_PCI_DEV, edev->config_addr);
+	/*
+	 * We have to restore the PCI config space after reset since the
+	 * firmware can't see SRIOV VFs.
+	 *
+	 * FIXME: The MPS, error routing rules, timeout setting are worthy
+	 * to be exported by firmware in extendible way.
+	 */
+	if (edev->physfn) {
+		ret = pnv_eeh_restore_vf_config(pdn);
+	} else {
+		phb = edev->phb->private_data;
+		ret = opal_pci_reinit(phb->opal_id,
+				      OPAL_REINIT_PCI_DEV, edev->config_addr);
+	}
+
 	if (ret) {
 		pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
 			__func__, edev->config_addr, ret);
@@ -1516,6 +1699,40 @@ static struct eeh_ops pnv_eeh_ops = {
 	.restore_config		= pnv_eeh_restore_config
 };
 
+void pcibios_bus_add_device(struct pci_dev *pdev)
+{
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+
+	if (!pdev->is_virtfn)
+		return;
+
+	/*
+	 * The following operations will fail if VF's sysfs files
+	 * aren't created or its resources aren't finalized.
+	 */
+	eeh_add_device_early(pdn);
+	eeh_add_device_late(pdev);
+	eeh_sysfs_add_device(pdev);
+}
+
+#ifdef CONFIG_PCI_IOV
+static void pnv_pci_fixup_vf_mps(struct pci_dev *pdev)
+{
+	struct pci_dn *pdn = pci_get_pdn(pdev);
+	int parent_mps;
+
+	if (!pdev->is_virtfn)
+		return;
+
+	/* Synchronize MPS for VF and PF */
+	parent_mps = pcie_get_mps(pdev->physfn);
+	if ((128 << pdev->pcie_mpss) >= parent_mps)
+		pcie_set_mps(pdev, parent_mps);
+	pdn->mps = pcie_get_mps(pdev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pnv_pci_fixup_vf_mps);
+#endif /* CONFIG_PCI_IOV */
+
 /**
  * eeh_powernv_init - Register platform dependent EEH operations
  *
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 59d735d2e5c0..fcc8b6861b63 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -35,9 +35,9 @@ int pnv_save_sprs_for_winkle(void)
 	int rc;
 
 	/*
-	 * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross
+	 * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric across
 	 * all cpus at boot. Get these reg values of current cpu and use the
-	 * same accross all cpus.
+	 * same across all cpus.
 	 */
 	uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
 	uint64_t hid0_val = mfspr(SPRN_HID0);
@@ -185,7 +185,7 @@ static ssize_t store_fastsleep_workaround_applyonce(struct device *dev,
 	 * fastsleep workaround needs to be left in 'applied' state on all
 	 * the cores. Do this by-
 	 * 1. Patching out the call to 'undo' workaround in fastsleep exit path
-	 * 2. Sending ipi to all the cores which have atleast one online thread
+	 * 2. Sending ipi to all the cores which have at least one online thread
 	 * 3. Patching out the call to 'apply' workaround in fastsleep entry
 	 * path
 	 * There is no need to send ipi to cores which have all threads
@@ -242,7 +242,7 @@ static int __init pnv_init_idle_states(void)
 	if (cpuidle_disable != IDLE_NO_OVERRIDE)
 		goto out;
 
-	if (!firmware_has_feature(FW_FEATURE_OPALv3))
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		goto out;
 
 	power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
new file mode 100644
index 000000000000..7229acd9bb3a
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/npu-dma.c
@@ -0,0 +1,348 @@
+/*
+ * This file implements the DMA operations for NVLink devices. The NPU
+ * devices all point to the same iommu table as the parent PCI device.
+ *
+ * Copyright Alistair Popple, IBM Corporation 2015.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/memblock.h>
+
+#include <asm/iommu.h>
+#include <asm/pnv-pci.h>
+#include <asm/msi_bitmap.h>
+#include <asm/opal.h>
+
+#include "powernv.h"
+#include "pci.h"
+
+/*
+ * Other types of TCE cache invalidation are not functional in the
+ * hardware.
+ */
+#define TCE_KILL_INVAL_ALL PPC_BIT(0)
+
+static struct pci_dev *get_pci_dev(struct device_node *dn)
+{
+	return PCI_DN(dn)->pcidev;
+}
+
+/* Given a NPU device get the associated PCI device. */
+struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev)
+{
+	struct device_node *dn;
+	struct pci_dev *gpdev;
+
+	/* Get assoicated PCI device */
+	dn = of_parse_phandle(npdev->dev.of_node, "ibm,gpu", 0);
+	if (!dn)
+		return NULL;
+
+	gpdev = get_pci_dev(dn);
+	of_node_put(dn);
+
+	return gpdev;
+}
+EXPORT_SYMBOL(pnv_pci_get_gpu_dev);
+
+/* Given the real PCI device get a linked NPU device. */
+struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
+{
+	struct device_node *dn;
+	struct pci_dev *npdev;
+
+	/* Get assoicated PCI device */
+	dn = of_parse_phandle(gpdev->dev.of_node, "ibm,npu", index);
+	if (!dn)
+		return NULL;
+
+	npdev = get_pci_dev(dn);
+	of_node_put(dn);
+
+	return npdev;
+}
+EXPORT_SYMBOL(pnv_pci_get_npu_dev);
+
+#define NPU_DMA_OP_UNSUPPORTED()					\
+	dev_err_once(dev, "%s operation unsupported for NVLink devices\n", \
+		__func__)
+
+static void *dma_npu_alloc(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag,
+			   struct dma_attrs *attrs)
+{
+	NPU_DMA_OP_UNSUPPORTED();
+	return NULL;
+}
+
+static void dma_npu_free(struct device *dev, size_t size,
+			 void *vaddr, dma_addr_t dma_handle,
+			 struct dma_attrs *attrs)
+{
+	NPU_DMA_OP_UNSUPPORTED();
+}
+
+static dma_addr_t dma_npu_map_page(struct device *dev, struct page *page,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	NPU_DMA_OP_UNSUPPORTED();
+	return 0;
+}
+
+static int dma_npu_map_sg(struct device *dev, struct scatterlist *sglist,
+			  int nelems, enum dma_data_direction direction,
+			  struct dma_attrs *attrs)
+{
+	NPU_DMA_OP_UNSUPPORTED();
+	return 0;
+}
+
+static int dma_npu_dma_supported(struct device *dev, u64 mask)
+{
+	NPU_DMA_OP_UNSUPPORTED();
+	return 0;
+}
+
+static u64 dma_npu_get_required_mask(struct device *dev)
+{
+	NPU_DMA_OP_UNSUPPORTED();
+	return 0;
+}
+
+struct dma_map_ops dma_npu_ops = {
+	.map_page		= dma_npu_map_page,
+	.map_sg			= dma_npu_map_sg,
+	.alloc			= dma_npu_alloc,
+	.free			= dma_npu_free,
+	.dma_supported		= dma_npu_dma_supported,
+	.get_required_mask	= dma_npu_get_required_mask,
+};
+
+/*
+ * Returns the PE assoicated with the PCI device of the given
+ * NPU. Returns the linked pci device if pci_dev != NULL.
+ */
+static struct pnv_ioda_pe *get_gpu_pci_dev_and_pe(struct pnv_ioda_pe *npe,
+						  struct pci_dev **gpdev)
+{
+	struct pnv_phb *phb;
+	struct pci_controller *hose;
+	struct pci_dev *pdev;
+	struct pnv_ioda_pe *pe;
+	struct pci_dn *pdn;
+
+	if (npe->flags & PNV_IODA_PE_PEER) {
+		pe = npe->peers[0];
+		pdev = pe->pdev;
+	} else {
+		pdev = pnv_pci_get_gpu_dev(npe->pdev);
+		if (!pdev)
+			return NULL;
+
+		pdn = pci_get_pdn(pdev);
+		if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
+			return NULL;
+
+		hose = pci_bus_to_host(pdev->bus);
+		phb = hose->private_data;
+		pe = &phb->ioda.pe_array[pdn->pe_number];
+	}
+
+	if (gpdev)
+		*gpdev = pdev;
+
+	return pe;
+}
+
+void pnv_npu_tce_invalidate_entire(struct pnv_ioda_pe *npe)
+{
+	struct pnv_phb *phb = npe->phb;
+
+	if (WARN_ON(phb->type != PNV_PHB_NPU ||
+		    !phb->ioda.tce_inval_reg ||
+		    !(npe->flags & PNV_IODA_PE_DEV)))
+		return;
+
+	mb(); /* Ensure previous TCE table stores are visible */
+	__raw_writeq(cpu_to_be64(TCE_KILL_INVAL_ALL),
+		phb->ioda.tce_inval_reg);
+}
+
+void pnv_npu_tce_invalidate(struct pnv_ioda_pe *npe,
+				struct iommu_table *tbl,
+				unsigned long index,
+				unsigned long npages,
+				bool rm)
+{
+	struct pnv_phb *phb = npe->phb;
+
+	/* We can only invalidate the whole cache on NPU */
+	unsigned long val = TCE_KILL_INVAL_ALL;
+
+	if (WARN_ON(phb->type != PNV_PHB_NPU ||
+		    !phb->ioda.tce_inval_reg ||
+		    !(npe->flags & PNV_IODA_PE_DEV)))
+		return;
+
+	mb(); /* Ensure previous TCE table stores are visible */
+	if (rm)
+		__raw_rm_writeq(cpu_to_be64(val),
+		  (__be64 __iomem *) phb->ioda.tce_inval_reg_phys);
+	else
+		__raw_writeq(cpu_to_be64(val),
+			phb->ioda.tce_inval_reg);
+}
+
+void pnv_npu_init_dma_pe(struct pnv_ioda_pe *npe)
+{
+	struct pnv_ioda_pe *gpe;
+	struct pci_dev *gpdev;
+	int i, avail = -1;
+
+	if (!npe->pdev || !(npe->flags & PNV_IODA_PE_DEV))
+		return;
+
+	gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
+	if (!gpe)
+		return;
+
+	for (i = 0; i < PNV_IODA_MAX_PEER_PES; i++) {
+		/* Nothing to do if the PE is already connected. */
+		if (gpe->peers[i] == npe)
+			return;
+
+		if (!gpe->peers[i])
+			avail = i;
+	}
+
+	if (WARN_ON(avail < 0))
+		return;
+
+	gpe->peers[avail] = npe;
+	gpe->flags |= PNV_IODA_PE_PEER;
+
+	/*
+	 * We assume that the NPU devices only have a single peer PE
+	 * (the GPU PCIe device PE).
+	 */
+	npe->peers[0] = gpe;
+	npe->flags |= PNV_IODA_PE_PEER;
+}
+
+/*
+ * For the NPU we want to point the TCE table at the same table as the
+ * real PCI device.
+ */
+static void pnv_npu_disable_bypass(struct pnv_ioda_pe *npe)
+{
+	struct pnv_phb *phb = npe->phb;
+	struct pci_dev *gpdev;
+	struct pnv_ioda_pe *gpe;
+	void *addr;
+	unsigned int size;
+	int64_t rc;
+
+	/*
+	 * Find the assoicated PCI devices and get the dma window
+	 * information from there.
+	 */
+	if (!npe->pdev || !(npe->flags & PNV_IODA_PE_DEV))
+		return;
+
+	gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
+	if (!gpe)
+		return;
+
+	addr = (void *)gpe->table_group.tables[0]->it_base;
+	size = gpe->table_group.tables[0]->it_size << 3;
+	rc = opal_pci_map_pe_dma_window(phb->opal_id, npe->pe_number,
+					npe->pe_number, 1, __pa(addr),
+					size, 0x1000);
+	if (rc != OPAL_SUCCESS)
+		pr_warn("%s: Error %lld setting DMA window on PHB#%d-PE#%d\n",
+			__func__, rc, phb->hose->global_number, npe->pe_number);
+
+	/*
+	 * We don't initialise npu_pe->tce32_table as we always use
+	 * dma_npu_ops which are nops.
+	 */
+	set_dma_ops(&npe->pdev->dev, &dma_npu_ops);
+}
+
+/*
+ * Enable/disable bypass mode on the NPU. The NPU only supports one
+ * window per link, so bypass needs to be explicitly enabled or
+ * disabled. Unlike for a PHB3 bypass and non-bypass modes can't be
+ * active at the same time.
+ */
+int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe, bool enable)
+{
+	struct pnv_phb *phb = npe->phb;
+	int64_t rc = 0;
+
+	if (phb->type != PNV_PHB_NPU || !npe->pdev)
+		return -EINVAL;
+
+	if (enable) {
+		/* Enable the bypass window */
+		phys_addr_t top = memblock_end_of_DRAM();
+
+		npe->tce_bypass_base = 0;
+		top = roundup_pow_of_two(top);
+		dev_info(&npe->pdev->dev, "Enabling bypass for PE %d\n",
+			 npe->pe_number);
+		rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
+					npe->pe_number, npe->pe_number,
+					npe->tce_bypass_base, top);
+	} else {
+		/*
+		 * Disable the bypass window by replacing it with the
+		 * TCE32 window.
+		 */
+		pnv_npu_disable_bypass(npe);
+	}
+
+	return rc;
+}
+
+int pnv_npu_dma_set_mask(struct pci_dev *npdev, u64 dma_mask)
+{
+	struct pci_controller *hose = pci_bus_to_host(npdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	struct pci_dn *pdn = pci_get_pdn(npdev);
+	struct pnv_ioda_pe *npe, *gpe;
+	struct pci_dev *gpdev;
+	uint64_t top;
+	bool bypass = false;
+
+	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
+		return -ENXIO;
+
+	/* We only do bypass if it's enabled on the linked device */
+	npe = &phb->ioda.pe_array[pdn->pe_number];
+	gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
+	if (!gpe)
+		return -ENODEV;
+
+	if (gpe->tce_bypass_enabled) {
+		top = gpe->tce_bypass_base + memblock_end_of_DRAM() - 1;
+		bypass = (dma_mask >= top);
+	}
+
+	if (bypass)
+		dev_info(&npdev->dev, "Using 64-bit DMA iommu bypass\n");
+	else
+		dev_info(&npdev->dev, "Using 32-bit DMA via iommu\n");
+
+	pnv_npu_dma_set_bypass(npe, bypass);
+	*npdev->dev.dma_mask = dma_mask;
+
+	return 0;
+}
diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c
index 6ccfb6c1c707..e505223b4ec5 100644
--- a/arch/powerpc/platforms/powernv/opal-irqchip.c
+++ b/arch/powerpc/platforms/powernv/opal-irqchip.c
@@ -43,11 +43,34 @@ static unsigned int opal_irq_count;
 static unsigned int *opal_irqs;
 
 static void opal_handle_irq_work(struct irq_work *work);
-static __be64 last_outstanding_events;
+static u64 last_outstanding_events;
 static struct irq_work opal_event_irq_work = {
 	.func = opal_handle_irq_work,
 };
 
+void opal_handle_events(uint64_t events)
+{
+	int virq, hwirq = 0;
+	u64 mask = opal_event_irqchip.mask;
+
+	if (!in_irq() && (events & mask)) {
+		last_outstanding_events = events;
+		irq_work_queue(&opal_event_irq_work);
+		return;
+	}
+
+	while (events & mask) {
+		hwirq = fls64(events) - 1;
+		if (BIT_ULL(hwirq) & mask) {
+			virq = irq_find_mapping(opal_event_irqchip.domain,
+						hwirq);
+			if (virq)
+				generic_handle_irq(virq);
+		}
+		events &= ~BIT_ULL(hwirq);
+	}
+}
+
 static void opal_event_mask(struct irq_data *d)
 {
 	clear_bit(d->hwirq, &opal_event_irqchip.mask);
@@ -55,9 +78,21 @@ static void opal_event_mask(struct irq_data *d)
 
 static void opal_event_unmask(struct irq_data *d)
 {
+	__be64 events;
+
 	set_bit(d->hwirq, &opal_event_irqchip.mask);
 
-	opal_poll_events(&last_outstanding_events);
+	opal_poll_events(&events);
+	last_outstanding_events = be64_to_cpu(events);
+
+	/*
+	 * We can't just handle the events now with opal_handle_events().
+	 * If we did we would deadlock when opal_event_unmask() is called from
+	 * handle_level_irq() with the irq descriptor lock held, because
+	 * calling opal_handle_events() would call generic_handle_irq() and
+	 * then handle_level_irq() which would try to take the descriptor lock
+	 * again. Instead queue the events for later.
+	 */
 	if (last_outstanding_events & opal_event_irqchip.mask)
 		/* Need to retrigger the interrupt */
 		irq_work_queue(&opal_event_irq_work);
@@ -96,29 +131,6 @@ static int opal_event_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
-void opal_handle_events(uint64_t events)
-{
-	int virq, hwirq = 0;
-	u64 mask = opal_event_irqchip.mask;
-
-	if (!in_irq() && (events & mask)) {
-		last_outstanding_events = events;
-		irq_work_queue(&opal_event_irq_work);
-		return;
-	}
-
-	while (events & mask) {
-		hwirq = fls64(events) - 1;
-		if (BIT_ULL(hwirq) & mask) {
-			virq = irq_find_mapping(opal_event_irqchip.domain,
-						hwirq);
-			if (virq)
-				generic_handle_irq(virq);
-		}
-		events &= ~BIT_ULL(hwirq);
-	}
-}
-
 static irqreturn_t opal_interrupt(int irq, void *data)
 {
 	__be64 events;
@@ -131,7 +143,7 @@ static irqreturn_t opal_interrupt(int irq, void *data)
 
 static void opal_handle_irq_work(struct irq_work *work)
 {
-	opal_handle_events(be64_to_cpu(last_outstanding_events));
+	opal_handle_events(last_outstanding_events);
 }
 
 static int opal_event_match(struct irq_domain *h, struct device_node *node,
diff --git a/arch/powerpc/platforms/powernv/opal-kmsg.c b/arch/powerpc/platforms/powernv/opal-kmsg.c
new file mode 100644
index 000000000000..6f1214d4de92
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-kmsg.c
@@ -0,0 +1,75 @@
+/*
+ * kmsg dumper that ensures the OPAL console fully flushes panic messages
+ *
+ * Author: Russell Currey <ruscur@russell.cc>
+ *
+ * Copyright 2015 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kmsg_dump.h>
+
+#include <asm/opal.h>
+#include <asm/opal-api.h>
+
+/*
+ * Console output is controlled by OPAL firmware.  The kernel regularly calls
+ * OPAL_POLL_EVENTS, which flushes some console output.  In a panic state,
+ * however, the kernel no longer calls OPAL_POLL_EVENTS and the panic message
+ * may not be completely printed.  This function does not actually dump the
+ * message, it just ensures that OPAL completely flushes the console buffer.
+ */
+static void force_opal_console_flush(struct kmsg_dumper *dumper,
+				     enum kmsg_dump_reason reason)
+{
+	int i;
+	int64_t ret;
+
+	/*
+	 * Outside of a panic context the pollers will continue to run,
+	 * so we don't need to do any special flushing.
+	 */
+	if (reason != KMSG_DUMP_PANIC)
+		return;
+
+	if (opal_check_token(OPAL_CONSOLE_FLUSH)) {
+		ret = opal_console_flush(0);
+
+		if (ret == OPAL_UNSUPPORTED || ret == OPAL_PARAMETER)
+			return;
+
+		/* Incrementally flush until there's nothing left */
+		while (opal_console_flush(0) != OPAL_SUCCESS);
+	} else {
+		/*
+		 * If OPAL_CONSOLE_FLUSH is not implemented in the firmware,
+		 * the console can still be flushed by calling the polling
+		 * function enough times to flush the buffer.  We don't know
+		 * how much output still needs to be flushed, but we can be
+		 * generous since the kernel is in panic and doesn't need
+		 * to do much else.
+		 */
+		printk(KERN_NOTICE "opal: OPAL_CONSOLE_FLUSH missing.\n");
+		for (i = 0; i < 1024; i++) {
+			opal_poll_events(NULL);
+		}
+	}
+}
+
+static struct kmsg_dumper opal_kmsg_dumper = {
+	.dump = force_opal_console_flush
+};
+
+void __init opal_kmsg_init(void)
+{
+	int rc;
+
+	/* Add our dumper to the list */
+	rc = kmsg_dump_register(&opal_kmsg_dumper);
+	if (rc != 0)
+		pr_err("opal: kmsg_dump_register failed; returned %d\n", rc);
+}
diff --git a/arch/powerpc/platforms/powernv/opal-msglog.c b/arch/powerpc/platforms/powernv/opal-msglog.c
index 44ed78af1a0d..39d6ff9e5630 100644
--- a/arch/powerpc/platforms/powernv/opal-msglog.c
+++ b/arch/powerpc/platforms/powernv/opal-msglog.c
@@ -31,26 +31,25 @@ struct memcons {
 	__be32 in_cons;
 };
 
-static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj,
-				struct bin_attribute *bin_attr, char *to,
-				loff_t pos, size_t count)
+static struct memcons *opal_memcons = NULL;
+
+ssize_t opal_msglog_copy(char *to, loff_t pos, size_t count)
 {
-	struct memcons *mc = bin_attr->private;
 	const char *conbuf;
 	ssize_t ret;
 	size_t first_read = 0;
 	uint32_t out_pos, avail;
 
-	if (!mc)
+	if (!opal_memcons)
 		return -ENODEV;
 
-	out_pos = be32_to_cpu(ACCESS_ONCE(mc->out_pos));
+	out_pos = be32_to_cpu(ACCESS_ONCE(opal_memcons->out_pos));
 
 	/* Now we've read out_pos, put a barrier in before reading the new
 	 * data it points to in conbuf. */
 	smp_rmb();
 
-	conbuf = phys_to_virt(be64_to_cpu(mc->obuf_phys));
+	conbuf = phys_to_virt(be64_to_cpu(opal_memcons->obuf_phys));
 
 	/* When the buffer has wrapped, read from the out_pos marker to the end
 	 * of the buffer, and then read the remaining data as in the un-wrapped
@@ -58,7 +57,7 @@ static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj,
 	if (out_pos & MEMCONS_OUT_POS_WRAP) {
 
 		out_pos &= MEMCONS_OUT_POS_MASK;
-		avail = be32_to_cpu(mc->obuf_size) - out_pos;
+		avail = be32_to_cpu(opal_memcons->obuf_size) - out_pos;
 
 		ret = memory_read_from_buffer(to, count, &pos,
 				conbuf + out_pos, avail);
@@ -76,7 +75,7 @@ static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj,
 	}
 
 	/* Sanity check. The firmware should not do this to us. */
-	if (out_pos > be32_to_cpu(mc->obuf_size)) {
+	if (out_pos > be32_to_cpu(opal_memcons->obuf_size)) {
 		pr_err("OPAL: memory console corruption. Aborting read.\n");
 		return -EINVAL;
 	}
@@ -91,6 +90,13 @@ out:
 	return ret;
 }
 
+static ssize_t opal_msglog_read(struct file *file, struct kobject *kobj,
+				struct bin_attribute *bin_attr, char *to,
+				loff_t pos, size_t count)
+{
+	return opal_msglog_copy(to, pos, count);
+}
+
 static struct bin_attribute opal_msglog_attr = {
 	.attr = {.name = "msglog", .mode = 0444},
 	.read = opal_msglog_read
@@ -117,7 +123,15 @@ void __init opal_msglog_init(void)
 		return;
 	}
 
-	opal_msglog_attr.private = mc;
+	opal_memcons = mc;
+}
+
+void __init opal_msglog_sysfs_init(void)
+{
+	if (!opal_memcons) {
+		pr_warn("OPAL: message log initialisation failed, not creating sysfs entry\n");
+		return;
+	}
 
 	if (sysfs_create_bin_file(opal_kobj, &opal_msglog_attr) != 0)
 		pr_warn("OPAL: sysfs file creation failed\n");
diff --git a/arch/powerpc/platforms/powernv/opal-prd.c b/arch/powerpc/platforms/powernv/opal-prd.c
index 4ece8e40dd54..e315e704cca7 100644
--- a/arch/powerpc/platforms/powernv/opal-prd.c
+++ b/arch/powerpc/platforms/powernv/opal-prd.c
@@ -434,7 +434,6 @@ static const struct of_device_id opal_prd_match[] = {
 static struct platform_driver opal_prd_driver = {
 	.driver = {
 		.name		= "opal-prd",
-		.owner		= THIS_MODULE,
 		.of_match_table	= opal_prd_match,
 	},
 	.probe	= opal_prd_probe,
diff --git a/arch/powerpc/platforms/powernv/opal-rtc.c b/arch/powerpc/platforms/powernv/opal-rtc.c
index 37dbee15769f..f8868864f373 100644
--- a/arch/powerpc/platforms/powernv/opal-rtc.c
+++ b/arch/powerpc/platforms/powernv/opal-rtc.c
@@ -31,8 +31,7 @@ static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm)
 	tm->tm_hour	= bcd2bin((h_m_s_ms >> 56) & 0xff);
 	tm->tm_min	= bcd2bin((h_m_s_ms >> 48) & 0xff);
 	tm->tm_sec	= bcd2bin((h_m_s_ms >> 40) & 0xff);
-
-        GregorianDay(tm);
+	tm->tm_wday     = -1;
 }
 
 unsigned long __init opal_get_boot_time(void)
@@ -51,7 +50,7 @@ unsigned long __init opal_get_boot_time(void)
 		rc = opal_rtc_read(&__y_m_d, &__h_m_s_ms);
 		if (rc == OPAL_BUSY_EVENT)
 			opal_poll_events(NULL);
-		else
+		else if (rc == OPAL_BUSY)
 			mdelay(10);
 	}
 	if (rc != OPAL_SUCCESS)
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index b7a464fef7a7..e45b88a5d7e0 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -301,3 +301,4 @@ OPAL_CALL(opal_flash_erase,			OPAL_FLASH_ERASE);
 OPAL_CALL(opal_prd_msg,				OPAL_PRD_MSG);
 OPAL_CALL(opal_leds_get_ind,			OPAL_LEDS_GET_INDICATOR);
 OPAL_CALL(opal_leds_set_ind,			OPAL_LEDS_SET_INDICATOR);
+OPAL_CALL(opal_console_flush,			OPAL_CONSOLE_FLUSH);
diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c
index 7634d1c62299..d0ac535cf5d7 100644
--- a/arch/powerpc/platforms/powernv/opal-xscom.c
+++ b/arch/powerpc/platforms/powernv/opal-xscom.c
@@ -126,7 +126,7 @@ static const struct scom_controller opal_scom_controller = {
 
 static int opal_xscom_init(void)
 {
-	if (firmware_has_feature(FW_FEATURE_OPALv3))
+	if (firmware_has_feature(FW_FEATURE_OPAL))
 		scom_init(&opal_scom_controller);
 	return 0;
 }
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 4296d55e88f3..0256d0729252 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -98,16 +98,11 @@ int __init early_init_dt_scan_opal(unsigned long node,
 	pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%d)\n",
 		 opal.size, sizep, runtimesz);
 
-	powerpc_firmware_features |= FW_FEATURE_OPAL;
 	if (of_flat_dt_is_compatible(node, "ibm,opal-v3")) {
-		powerpc_firmware_features |= FW_FEATURE_OPALv2;
-		powerpc_firmware_features |= FW_FEATURE_OPALv3;
-		pr_info("OPAL V3 detected !\n");
-	} else if (of_flat_dt_is_compatible(node, "ibm,opal-v2")) {
-		powerpc_firmware_features |= FW_FEATURE_OPALv2;
-		pr_info("OPAL V2 detected !\n");
+		powerpc_firmware_features |= FW_FEATURE_OPAL;
+		pr_info("OPAL detected !\n");
 	} else {
-		pr_info("OPAL V1 detected !\n");
+		panic("OPAL != V3 detected, no longer supported.\n");
 	}
 
 	/* Reinit all cores with the right endian */
@@ -278,7 +273,7 @@ static void opal_handle_message(void)
 
 	/* Sanity check */
 	if (type >= OPAL_MSG_TYPE_MAX) {
-		pr_warning("%s: Unknown message type: %u\n", __func__, type);
+		pr_warn_once("%s: Unknown message type: %u\n", __func__, type);
 		return;
 	}
 	opal_message_do_notify(type, (void *)&msg);
@@ -352,17 +347,15 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
 	 * enough room and be done with it
 	 */
 	spin_lock_irqsave(&opal_write_lock, flags);
-	if (firmware_has_feature(FW_FEATURE_OPALv2)) {
-		rc = opal_console_write_buffer_space(vtermno, &olen);
-		len = be64_to_cpu(olen);
-		if (rc || len < total_len) {
-			spin_unlock_irqrestore(&opal_write_lock, flags);
-			/* Closed -> drop characters */
-			if (rc)
-				return total_len;
-			opal_poll_events(NULL);
-			return -EAGAIN;
-		}
+	rc = opal_console_write_buffer_space(vtermno, &olen);
+	len = be64_to_cpu(olen);
+	if (rc || len < total_len) {
+		spin_unlock_irqrestore(&opal_write_lock, flags);
+		/* Closed -> drop characters */
+		if (rc)
+			return total_len;
+		opal_poll_events(NULL);
+		return -EAGAIN;
 	}
 
 	/* We still try to handle partial completions, though they
@@ -555,7 +548,7 @@ bool opal_mce_check_early_recovery(struct pt_regs *regs)
 		goto out;
 
 	if ((regs->nip >= opal.base) &&
-			(regs->nip <= (opal.base + opal.size)))
+			(regs->nip < (opal.base + opal.size)))
 		recover_addr = find_recovery_address(regs->nip);
 
 	/*
@@ -696,10 +689,7 @@ static int __init opal_init(void)
 	}
 
 	/* Register OPAL consoles if any ports */
-	if (firmware_has_feature(FW_FEATURE_OPALv2))
-		consoles = of_find_node_by_path("/ibm,opal/consoles");
-	else
-		consoles = of_node_get(opal_node);
+	consoles = of_find_node_by_path("/ibm,opal/consoles");
 	if (consoles) {
 		for_each_child_of_node(consoles, np) {
 			if (strcmp(np->name, "serial"))
@@ -734,6 +724,9 @@ static int __init opal_init(void)
 		of_node_put(leds);
 	}
 
+	/* Initialise OPAL message log interface */
+	opal_msglog_init();
+
 	/* Create "opal" kobject under /sys/firmware */
 	rc = opal_sysfs_init();
 	if (rc == 0) {
@@ -749,8 +742,8 @@ static int __init opal_init(void)
 		opal_platform_dump_init();
 		/* Setup system parameters interface */
 		opal_sys_param_init();
-		/* Setup message log interface. */
-		opal_msglog_init();
+		/* Setup message log sysfs interface. */
+		opal_msglog_sysfs_init();
 	}
 
 	/* Initialize platform devices: IPMI backend, PRD & flash interface */
@@ -758,6 +751,9 @@ static int __init opal_init(void)
 	opal_pdev_init(opal_node, "ibm,opal-flash");
 	opal_pdev_init(opal_node, "ibm,opal-prd");
 
+	/* Initialise OPAL kmsg dumper for flushing console on panic */
+	opal_kmsg_init();
+
 	return 0;
 }
 machine_subsys_initcall(powernv, opal_init);
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 414fd1a00fda..c5baaf3cc4e5 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -116,16 +116,6 @@ static int __init iommu_setup(char *str)
 }
 early_param("iommu", iommu_setup);
 
-/*
- * stdcix is only supposed to be used in hypervisor real mode as per
- * the architecture spec
- */
-static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
-{
-	__asm__ __volatile__("stdcix %0,0,%1"
-		: : "r" (val), "r" (paddr) : "memory");
-}
-
 static inline bool pnv_pci_is_mem_pref_64(unsigned long flags)
 {
 	return ((flags & (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH)) ==
@@ -344,7 +334,7 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
 		return;
 	}
 
-	if (!firmware_has_feature(FW_FEATURE_OPALv3)) {
+	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
 		pr_info("  Firmware too old to support M64 window\n");
 		return;
 	}
@@ -357,6 +347,7 @@ static void __init pnv_ioda_parse_m64_window(struct pnv_phb *phb)
 	}
 
 	res = &hose->mem_resources[1];
+	res->name = dn->full_name;
 	res->start = of_translate_address(dn, r + 2);
 	res->end = res->start + of_read_number(r + 4, 2) - 1;
 	res->flags = (IORESOURCE_MEM | IORESOURCE_MEM_64 | IORESOURCE_PREFETCH);
@@ -780,8 +771,12 @@ static int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe)
 		return -ENXIO;
 	}
 
-	/* Configure PELTV */
-	pnv_ioda_set_peltv(phb, pe, true);
+	/*
+	 * Configure PELTV. NPUs don't have a PELTV table so skip
+	 * configuration on them.
+	 */
+	if (phb->type != PNV_PHB_NPU)
+		pnv_ioda_set_peltv(phb, pe, true);
 
 	/* Setup reverse map */
 	for (rid = pe->rid; rid < rid_end; rid++)
@@ -877,9 +872,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
 		if (!res->flags || !res->parent)
 			continue;
 
-		if (!pnv_pci_is_mem_pref_64(res->flags))
-			continue;
-
 		/*
 		 * The actual IOV BAR range is determined by the start address
 		 * and the actual size for num_vfs VFs BAR.  This check is to
@@ -908,9 +900,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
 		if (!res->flags || !res->parent)
 			continue;
 
-		if (!pnv_pci_is_mem_pref_64(res->flags))
-			continue;
-
 		size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES);
 		res2 = *res;
 		res->start += size * offset;
@@ -924,7 +913,6 @@ static int pnv_pci_vf_resource_shift(struct pci_dev *dev, int offset)
 }
 #endif /* CONFIG_PCI_IOV */
 
-#if 0
 static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
@@ -941,11 +929,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 	if (pdn->pe_number != IODA_INVALID_PE)
 		return NULL;
 
-	/* PE#0 has been pre-set */
-	if (dev->bus->number == 0)
-		pe_num = 0;
-	else
-		pe_num = pnv_ioda_alloc_pe(phb);
+	pe_num = pnv_ioda_alloc_pe(phb);
 	if (pe_num == IODA_INVALID_PE) {
 		pr_warning("%s: Not enough PE# available, disabling device\n",
 			   pci_name(dev));
@@ -963,6 +947,7 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 	pci_dev_get(dev);
 	pdn->pcidev = dev;
 	pdn->pe_number = pe_num;
+	pe->flags = PNV_IODA_PE_DEV;
 	pe->pdev = dev;
 	pe->pbus = NULL;
 	pe->tce32_seg = -1;
@@ -993,7 +978,6 @@ static struct pnv_ioda_pe *pnv_ioda_setup_dev_PE(struct pci_dev *dev)
 
 	return pe;
 }
-#endif /* Useful for SRIOV case */
 
 static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 {
@@ -1007,6 +991,7 @@ static void pnv_ioda_setup_same_PE(struct pci_bus *bus, struct pnv_ioda_pe *pe)
 				pci_name(dev));
 			continue;
 		}
+		pdn->pcidev = dev;
 		pdn->pe_number = pe->pe_number;
 		pe->dma_weight += pnv_ioda_dma_weight(dev);
 		if ((pe->flags & PNV_IODA_PE_BUS_ALL) && dev->subordinate)
@@ -1083,6 +1068,77 @@ static void pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
 	pnv_ioda_link_pe_by_weight(phb, pe);
 }
 
+static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
+{
+	int pe_num, found_pe = false, rc;
+	long rid;
+	struct pnv_ioda_pe *pe;
+	struct pci_dev *gpu_pdev;
+	struct pci_dn *npu_pdn;
+	struct pci_controller *hose = pci_bus_to_host(npu_pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+
+	/*
+	 * Due to a hardware errata PE#0 on the NPU is reserved for
+	 * error handling. This means we only have three PEs remaining
+	 * which need to be assigned to four links, implying some
+	 * links must share PEs.
+	 *
+	 * To achieve this we assign PEs such that NPUs linking the
+	 * same GPU get assigned the same PE.
+	 */
+	gpu_pdev = pnv_pci_get_gpu_dev(npu_pdev);
+	for (pe_num = 0; pe_num < phb->ioda.total_pe; pe_num++) {
+		pe = &phb->ioda.pe_array[pe_num];
+		if (!pe->pdev)
+			continue;
+
+		if (pnv_pci_get_gpu_dev(pe->pdev) == gpu_pdev) {
+			/*
+			 * This device has the same peer GPU so should
+			 * be assigned the same PE as the existing
+			 * peer NPU.
+			 */
+			dev_info(&npu_pdev->dev,
+				"Associating to existing PE %d\n", pe_num);
+			pci_dev_get(npu_pdev);
+			npu_pdn = pci_get_pdn(npu_pdev);
+			rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
+			npu_pdn->pcidev = npu_pdev;
+			npu_pdn->pe_number = pe_num;
+			pe->dma_weight += pnv_ioda_dma_weight(npu_pdev);
+			phb->ioda.pe_rmap[rid] = pe->pe_number;
+
+			/* Map the PE to this link */
+			rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
+					OpalPciBusAll,
+					OPAL_COMPARE_RID_DEVICE_NUMBER,
+					OPAL_COMPARE_RID_FUNCTION_NUMBER,
+					OPAL_MAP_PE);
+			WARN_ON(rc != OPAL_SUCCESS);
+			found_pe = true;
+			break;
+		}
+	}
+
+	if (!found_pe)
+		/*
+		 * Could not find an existing PE so allocate a new
+		 * one.
+		 */
+		return pnv_ioda_setup_dev_PE(npu_pdev);
+	else
+		return pe;
+}
+
+static void pnv_ioda_setup_npu_PEs(struct pci_bus *bus)
+{
+	struct pci_dev *pdev;
+
+	list_for_each_entry(pdev, &bus->devices, bus_list)
+		pnv_ioda_setup_npu_PE(pdev);
+}
+
 static void pnv_ioda_setup_PEs(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
@@ -1119,34 +1175,51 @@ static void pnv_pci_ioda_setup_PEs(void)
 		if (phb->reserve_m64_pe)
 			phb->reserve_m64_pe(hose->bus, NULL, true);
 
-		pnv_ioda_setup_PEs(hose->bus);
+		/*
+		 * On NPU PHB, we expect separate PEs for individual PCI
+		 * functions. PCI bus dependent PEs are required for the
+		 * remaining types of PHBs.
+		 */
+		if (phb->type == PNV_PHB_NPU) {
+			/* PE#0 is needed for error reporting */
+			pnv_ioda_reserve_pe(phb, 0);
+			pnv_ioda_setup_npu_PEs(hose->bus);
+		} else
+			pnv_ioda_setup_PEs(hose->bus);
 	}
 }
 
 #ifdef CONFIG_PCI_IOV
-static int pnv_pci_vf_release_m64(struct pci_dev *pdev)
+static int pnv_pci_vf_release_m64(struct pci_dev *pdev, u16 num_vfs)
 {
 	struct pci_bus        *bus;
 	struct pci_controller *hose;
 	struct pnv_phb        *phb;
 	struct pci_dn         *pdn;
 	int                    i, j;
+	int                    m64_bars;
 
 	bus = pdev->bus;
 	hose = pci_bus_to_host(bus);
 	phb = hose->private_data;
 	pdn = pci_get_pdn(pdev);
 
+	if (pdn->m64_single_mode)
+		m64_bars = num_vfs;
+	else
+		m64_bars = 1;
+
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
-		for (j = 0; j < M64_PER_IOV; j++) {
-			if (pdn->m64_wins[i][j] == IODA_INVALID_M64)
+		for (j = 0; j < m64_bars; j++) {
+			if (pdn->m64_map[j][i] == IODA_INVALID_M64)
 				continue;
 			opal_pci_phb_mmio_enable(phb->opal_id,
-				OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 0);
-			clear_bit(pdn->m64_wins[i][j], &phb->ioda.m64_bar_alloc);
-			pdn->m64_wins[i][j] = IODA_INVALID_M64;
+				OPAL_M64_WINDOW_TYPE, pdn->m64_map[j][i], 0);
+			clear_bit(pdn->m64_map[j][i], &phb->ioda.m64_bar_alloc);
+			pdn->m64_map[j][i] = IODA_INVALID_M64;
 		}
 
+	kfree(pdn->m64_map);
 	return 0;
 }
 
@@ -1163,8 +1236,7 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
 	int                    total_vfs;
 	resource_size_t        size, start;
 	int                    pe_num;
-	int                    vf_groups;
-	int                    vf_per_group;
+	int                    m64_bars;
 
 	bus = pdev->bus;
 	hose = pci_bus_to_host(bus);
@@ -1172,29 +1244,26 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
 	pdn = pci_get_pdn(pdev);
 	total_vfs = pci_sriov_get_totalvfs(pdev);
 
-	/* Initialize the m64_wins to IODA_INVALID_M64 */
-	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++)
-		for (j = 0; j < M64_PER_IOV; j++)
-			pdn->m64_wins[i][j] = IODA_INVALID_M64;
+	if (pdn->m64_single_mode)
+		m64_bars = num_vfs;
+	else
+		m64_bars = 1;
+
+	pdn->m64_map = kmalloc(sizeof(*pdn->m64_map) * m64_bars, GFP_KERNEL);
+	if (!pdn->m64_map)
+		return -ENOMEM;
+	/* Initialize the m64_map to IODA_INVALID_M64 */
+	for (i = 0; i < m64_bars ; i++)
+		for (j = 0; j < PCI_SRIOV_NUM_BARS; j++)
+			pdn->m64_map[i][j] = IODA_INVALID_M64;
 
-	if (pdn->m64_per_iov == M64_PER_IOV) {
-		vf_groups = (num_vfs <= M64_PER_IOV) ? num_vfs: M64_PER_IOV;
-		vf_per_group = (num_vfs <= M64_PER_IOV)? 1:
-			roundup_pow_of_two(num_vfs) / pdn->m64_per_iov;
-	} else {
-		vf_groups = 1;
-		vf_per_group = 1;
-	}
 
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
 		res = &pdev->resource[i + PCI_IOV_RESOURCES];
 		if (!res->flags || !res->parent)
 			continue;
 
-		if (!pnv_pci_is_mem_pref_64(res->flags))
-			continue;
-
-		for (j = 0; j < vf_groups; j++) {
+		for (j = 0; j < m64_bars; j++) {
 			do {
 				win = find_next_zero_bit(&phb->ioda.m64_bar_alloc,
 						phb->ioda.m64_bar_idx + 1, 0);
@@ -1203,12 +1272,11 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
 					goto m64_failed;
 			} while (test_and_set_bit(win, &phb->ioda.m64_bar_alloc));
 
-			pdn->m64_wins[i][j] = win;
+			pdn->m64_map[j][i] = win;
 
-			if (pdn->m64_per_iov == M64_PER_IOV) {
+			if (pdn->m64_single_mode) {
 				size = pci_iov_resource_size(pdev,
 							PCI_IOV_RESOURCES + i);
-				size = size * vf_per_group;
 				start = res->start + size * j;
 			} else {
 				size = resource_size(res);
@@ -1216,16 +1284,16 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
 			}
 
 			/* Map the M64 here */
-			if (pdn->m64_per_iov == M64_PER_IOV) {
-				pe_num = pdn->offset + j;
+			if (pdn->m64_single_mode) {
+				pe_num = pdn->pe_num_map[j];
 				rc = opal_pci_map_pe_mmio_window(phb->opal_id,
 						pe_num, OPAL_M64_WINDOW_TYPE,
-						pdn->m64_wins[i][j], 0);
+						pdn->m64_map[j][i], 0);
 			}
 
 			rc = opal_pci_set_phb_mem_window(phb->opal_id,
 						 OPAL_M64_WINDOW_TYPE,
-						 pdn->m64_wins[i][j],
+						 pdn->m64_map[j][i],
 						 start,
 						 0, /* unused */
 						 size);
@@ -1237,12 +1305,12 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
 				goto m64_failed;
 			}
 
-			if (pdn->m64_per_iov == M64_PER_IOV)
+			if (pdn->m64_single_mode)
 				rc = opal_pci_phb_mmio_enable(phb->opal_id,
-				     OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 2);
+				     OPAL_M64_WINDOW_TYPE, pdn->m64_map[j][i], 2);
 			else
 				rc = opal_pci_phb_mmio_enable(phb->opal_id,
-				     OPAL_M64_WINDOW_TYPE, pdn->m64_wins[i][j], 1);
+				     OPAL_M64_WINDOW_TYPE, pdn->m64_map[j][i], 1);
 
 			if (rc != OPAL_SUCCESS) {
 				dev_err(&pdev->dev, "Failed to enable M64 window #%d: %llx\n",
@@ -1254,7 +1322,7 @@ static int pnv_pci_vf_assign_m64(struct pci_dev *pdev, u16 num_vfs)
 	return 0;
 
 m64_failed:
-	pnv_pci_vf_release_m64(pdev);
+	pnv_pci_vf_release_m64(pdev, num_vfs);
 	return -EBUSY;
 }
 
@@ -1281,15 +1349,13 @@ static void pnv_pci_ioda2_release_dma_pe(struct pci_dev *dev, struct pnv_ioda_pe
 	iommu_free_table(tbl, of_node_full_name(dev->dev.of_node));
 }
 
-static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs)
+static void pnv_ioda_release_vf_PE(struct pci_dev *pdev)
 {
 	struct pci_bus        *bus;
 	struct pci_controller *hose;
 	struct pnv_phb        *phb;
 	struct pnv_ioda_pe    *pe, *pe_n;
 	struct pci_dn         *pdn;
-	u16                    vf_index;
-	int64_t                rc;
 
 	bus = pdev->bus;
 	hose = pci_bus_to_host(bus);
@@ -1299,35 +1365,6 @@ static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 	if (!pdev->is_physfn)
 		return;
 
-	if (pdn->m64_per_iov == M64_PER_IOV && num_vfs > M64_PER_IOV) {
-		int   vf_group;
-		int   vf_per_group;
-		int   vf_index1;
-
-		vf_per_group = roundup_pow_of_two(num_vfs) / pdn->m64_per_iov;
-
-		for (vf_group = 0; vf_group < M64_PER_IOV; vf_group++)
-			for (vf_index = vf_group * vf_per_group;
-				vf_index < (vf_group + 1) * vf_per_group &&
-				vf_index < num_vfs;
-				vf_index++)
-				for (vf_index1 = vf_group * vf_per_group;
-					vf_index1 < (vf_group + 1) * vf_per_group &&
-					vf_index1 < num_vfs;
-					vf_index1++){
-
-					rc = opal_pci_set_peltv(phb->opal_id,
-						pdn->offset + vf_index,
-						pdn->offset + vf_index1,
-						OPAL_REMOVE_PE_FROM_DOMAIN);
-
-					if (rc)
-					    dev_warn(&pdev->dev, "%s: Failed to unlink same group PE#%d(%lld)\n",
-						__func__,
-						pdn->offset + vf_index1, rc);
-				}
-	}
-
 	list_for_each_entry_safe(pe, pe_n, &phb->ioda.pe_list, list) {
 		if (pe->parent_dev != pdev)
 			continue;
@@ -1352,7 +1389,7 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
 	struct pnv_phb        *phb;
 	struct pci_dn         *pdn;
 	struct pci_sriov      *iov;
-	u16 num_vfs;
+	u16                    num_vfs, i;
 
 	bus = pdev->bus;
 	hose = pci_bus_to_host(bus);
@@ -1362,18 +1399,25 @@ void pnv_pci_sriov_disable(struct pci_dev *pdev)
 	num_vfs = pdn->num_vfs;
 
 	/* Release VF PEs */
-	pnv_ioda_release_vf_PE(pdev, num_vfs);
+	pnv_ioda_release_vf_PE(pdev);
 
 	if (phb->type == PNV_PHB_IODA2) {
-		if (pdn->m64_per_iov == 1)
-			pnv_pci_vf_resource_shift(pdev, -pdn->offset);
+		if (!pdn->m64_single_mode)
+			pnv_pci_vf_resource_shift(pdev, -*pdn->pe_num_map);
 
 		/* Release M64 windows */
-		pnv_pci_vf_release_m64(pdev);
+		pnv_pci_vf_release_m64(pdev, num_vfs);
 
 		/* Release PE numbers */
-		bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
-		pdn->offset = 0;
+		if (pdn->m64_single_mode) {
+			for (i = 0; i < num_vfs; i++) {
+				if (pdn->pe_num_map[i] != IODA_INVALID_PE)
+					pnv_ioda_free_pe(phb, pdn->pe_num_map[i]);
+			}
+		} else
+			bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
+		/* Releasing pe_num_map */
+		kfree(pdn->pe_num_map);
 	}
 }
 
@@ -1388,7 +1432,6 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 	int                    pe_num;
 	u16                    vf_index;
 	struct pci_dn         *pdn;
-	int64_t                rc;
 
 	bus = pdev->bus;
 	hose = pci_bus_to_host(bus);
@@ -1400,7 +1443,10 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 
 	/* Reserve PE for each VF */
 	for (vf_index = 0; vf_index < num_vfs; vf_index++) {
-		pe_num = pdn->offset + vf_index;
+		if (pdn->m64_single_mode)
+			pe_num = pdn->pe_num_map[vf_index];
+		else
+			pe_num = *pdn->pe_num_map + vf_index;
 
 		pe = &phb->ioda.pe_array[pe_num];
 		pe->pe_number = pe_num;
@@ -1433,37 +1479,6 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 
 		pnv_pci_ioda2_setup_dma_pe(phb, pe);
 	}
-
-	if (pdn->m64_per_iov == M64_PER_IOV && num_vfs > M64_PER_IOV) {
-		int   vf_group;
-		int   vf_per_group;
-		int   vf_index1;
-
-		vf_per_group = roundup_pow_of_two(num_vfs) / pdn->m64_per_iov;
-
-		for (vf_group = 0; vf_group < M64_PER_IOV; vf_group++) {
-			for (vf_index = vf_group * vf_per_group;
-			     vf_index < (vf_group + 1) * vf_per_group &&
-			     vf_index < num_vfs;
-			     vf_index++) {
-				for (vf_index1 = vf_group * vf_per_group;
-				     vf_index1 < (vf_group + 1) * vf_per_group &&
-				     vf_index1 < num_vfs;
-				     vf_index1++) {
-
-					rc = opal_pci_set_peltv(phb->opal_id,
-						pdn->offset + vf_index,
-						pdn->offset + vf_index1,
-						OPAL_ADD_PE_TO_DOMAIN);
-
-					if (rc)
-					    dev_warn(&pdev->dev, "%s: Failed to link same group PE#%d(%lld)\n",
-						__func__,
-						pdn->offset + vf_index1, rc);
-				}
-			}
-		}
-	}
 }
 
 int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
@@ -1473,6 +1488,7 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 	struct pnv_phb        *phb;
 	struct pci_dn         *pdn;
 	int                    ret;
+	u16                    i;
 
 	bus = pdev->bus;
 	hose = pci_bus_to_host(bus);
@@ -1480,20 +1496,59 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 	pdn = pci_get_pdn(pdev);
 
 	if (phb->type == PNV_PHB_IODA2) {
+		if (!pdn->vfs_expanded) {
+			dev_info(&pdev->dev, "don't support this SRIOV device"
+				" with non 64bit-prefetchable IOV BAR\n");
+			return -ENOSPC;
+		}
+
+		/*
+		 * When M64 BARs functions in Single PE mode, the number of VFs
+		 * could be enabled must be less than the number of M64 BARs.
+		 */
+		if (pdn->m64_single_mode && num_vfs > phb->ioda.m64_bar_idx) {
+			dev_info(&pdev->dev, "Not enough M64 BAR for VFs\n");
+			return -EBUSY;
+		}
+
+		/* Allocating pe_num_map */
+		if (pdn->m64_single_mode)
+			pdn->pe_num_map = kmalloc(sizeof(*pdn->pe_num_map) * num_vfs,
+					GFP_KERNEL);
+		else
+			pdn->pe_num_map = kmalloc(sizeof(*pdn->pe_num_map), GFP_KERNEL);
+
+		if (!pdn->pe_num_map)
+			return -ENOMEM;
+
+		if (pdn->m64_single_mode)
+			for (i = 0; i < num_vfs; i++)
+				pdn->pe_num_map[i] = IODA_INVALID_PE;
+
 		/* Calculate available PE for required VFs */
-		mutex_lock(&phb->ioda.pe_alloc_mutex);
-		pdn->offset = bitmap_find_next_zero_area(
-			phb->ioda.pe_alloc, phb->ioda.total_pe,
-			0, num_vfs, 0);
-		if (pdn->offset >= phb->ioda.total_pe) {
+		if (pdn->m64_single_mode) {
+			for (i = 0; i < num_vfs; i++) {
+				pdn->pe_num_map[i] = pnv_ioda_alloc_pe(phb);
+				if (pdn->pe_num_map[i] == IODA_INVALID_PE) {
+					ret = -EBUSY;
+					goto m64_failed;
+				}
+			}
+		} else {
+			mutex_lock(&phb->ioda.pe_alloc_mutex);
+			*pdn->pe_num_map = bitmap_find_next_zero_area(
+				phb->ioda.pe_alloc, phb->ioda.total_pe,
+				0, num_vfs, 0);
+			if (*pdn->pe_num_map >= phb->ioda.total_pe) {
+				mutex_unlock(&phb->ioda.pe_alloc_mutex);
+				dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs);
+				kfree(pdn->pe_num_map);
+				return -EBUSY;
+			}
+			bitmap_set(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
 			mutex_unlock(&phb->ioda.pe_alloc_mutex);
-			dev_info(&pdev->dev, "Failed to enable VF%d\n", num_vfs);
-			pdn->offset = 0;
-			return -EBUSY;
 		}
-		bitmap_set(phb->ioda.pe_alloc, pdn->offset, num_vfs);
 		pdn->num_vfs = num_vfs;
-		mutex_unlock(&phb->ioda.pe_alloc_mutex);
 
 		/* Assign M64 window accordingly */
 		ret = pnv_pci_vf_assign_m64(pdev, num_vfs);
@@ -1507,8 +1562,8 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 		 * the IOV BAR according to the PE# allocated to the VFs.
 		 * Otherwise, the PE# for the VF will conflict with others.
 		 */
-		if (pdn->m64_per_iov == 1) {
-			ret = pnv_pci_vf_resource_shift(pdev, pdn->offset);
+		if (!pdn->m64_single_mode) {
+			ret = pnv_pci_vf_resource_shift(pdev, *pdn->pe_num_map);
 			if (ret)
 				goto m64_failed;
 		}
@@ -1520,8 +1575,16 @@ int pnv_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 	return 0;
 
 m64_failed:
-	bitmap_clear(phb->ioda.pe_alloc, pdn->offset, num_vfs);
-	pdn->offset = 0;
+	if (pdn->m64_single_mode) {
+		for (i = 0; i < num_vfs; i++) {
+			if (pdn->pe_num_map[i] != IODA_INVALID_PE)
+				pnv_ioda_free_pe(phb, pdn->pe_num_map[i]);
+		}
+	} else
+		bitmap_clear(phb->ioda.pe_alloc, *pdn->pe_num_map, num_vfs);
+
+	/* Releasing pe_num_map */
+	kfree(pdn->pe_num_map);
 
 	return ret;
 }
@@ -1540,8 +1603,7 @@ int pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
 	/* Allocate PCI data */
 	add_dev_pci_data(pdev);
 
-	pnv_pci_sriov_enable(pdev, num_vfs);
-	return 0;
+	return pnv_pci_sriov_enable(pdev, num_vfs);
 }
 #endif /* CONFIG_PCI_IOV */
 
@@ -1578,6 +1640,8 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 	struct pnv_ioda_pe *pe;
 	uint64_t top;
 	bool bypass = false;
+	struct pci_dev *linked_npu_dev;
+	int i;
 
 	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
 		return -ENODEV;;
@@ -1596,6 +1660,18 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 		set_dma_ops(&pdev->dev, &dma_iommu_ops);
 	}
 	*pdev->dev.dma_mask = dma_mask;
+
+	/* Update peer npu devices */
+	if (pe->flags & PNV_IODA_PE_PEER)
+		for (i = 0; i < PNV_IODA_MAX_PEER_PES; i++) {
+			if (!pe->peers[i])
+				continue;
+
+			linked_npu_dev = pe->peers[i]->pdev;
+			if (dma_get_mask(&linked_npu_dev->dev) != dma_mask)
+				dma_set_mask(&linked_npu_dev->dev, dma_mask);
+		}
+
 	return 0;
 }
 
@@ -1740,12 +1816,23 @@ static inline void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_ioda_pe *pe)
 	/* 01xb - invalidate TCEs that match the specified PE# */
 	unsigned long val = (0x4ull << 60) | (pe->pe_number & 0xFF);
 	struct pnv_phb *phb = pe->phb;
+	struct pnv_ioda_pe *npe;
+	int i;
 
 	if (!phb->ioda.tce_inval_reg)
 		return;
 
 	mb(); /* Ensure above stores are visible */
 	__raw_writeq(cpu_to_be64(val), phb->ioda.tce_inval_reg);
+
+	if (pe->flags & PNV_IODA_PE_PEER)
+		for (i = 0; i < PNV_IODA_MAX_PEER_PES; i++) {
+			npe = pe->peers[i];
+			if (!npe || npe->phb->type != PNV_PHB_NPU)
+				continue;
+
+			pnv_npu_tce_invalidate_entire(npe);
+		}
 }
 
 static void pnv_pci_ioda2_do_tce_invalidate(unsigned pe_number, bool rm,
@@ -1780,15 +1867,28 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
 	struct iommu_table_group_link *tgl;
 
 	list_for_each_entry_rcu(tgl, &tbl->it_group_list, next) {
+		struct pnv_ioda_pe *npe;
 		struct pnv_ioda_pe *pe = container_of(tgl->table_group,
 				struct pnv_ioda_pe, table_group);
 		__be64 __iomem *invalidate = rm ?
 			(__be64 __iomem *)pe->phb->ioda.tce_inval_reg_phys :
 			pe->phb->ioda.tce_inval_reg;
+		int i;
 
 		pnv_pci_ioda2_do_tce_invalidate(pe->pe_number, rm,
 			invalidate, tbl->it_page_shift,
 			index, npages);
+
+		if (pe->flags & PNV_IODA_PE_PEER)
+			/* Invalidate PEs using the same TCE table */
+			for (i = 0; i < PNV_IODA_MAX_PEER_PES; i++) {
+				npe = pe->peers[i];
+				if (!npe || npe->phb->type != PNV_PHB_NPU)
+					continue;
+
+				pnv_npu_tce_invalidate(npe, tbl, index,
+							npages, rm);
+			}
 	}
 }
 
@@ -2436,10 +2536,17 @@ static void pnv_ioda_setup_dma(struct pnv_phb *phb)
 			pe_info(pe, "DMA weight %d, assigned %d DMA32 segments\n",
 				pe->dma_weight, segs);
 			pnv_pci_ioda_setup_dma_pe(phb, pe, base, segs);
-		} else {
+		} else if (phb->type == PNV_PHB_IODA2) {
 			pe_info(pe, "Assign DMA32 space\n");
 			segs = 0;
 			pnv_pci_ioda2_setup_dma_pe(phb, pe);
+		} else if (phb->type == PNV_PHB_NPU) {
+			/*
+			 * We initialise the DMA space for an NPU PHB
+			 * after setup of the PHB is complete as we
+			 * point the NPU TVT to the the same location
+			 * as the PHB3 TVT.
+			 */
 		}
 
 		remaining -= segs;
@@ -2734,45 +2841,58 @@ static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
 #ifdef CONFIG_PCI_IOV
 static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 {
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
+	const resource_size_t gate = phb->ioda.m64_segsize >> 2;
 	struct resource *res;
 	int i;
-	resource_size_t size;
+	resource_size_t size, total_vf_bar_sz;
 	struct pci_dn *pdn;
 	int mul, total_vfs;
 
 	if (!pdev->is_physfn || pdev->is_added)
 		return;
 
-	hose = pci_bus_to_host(pdev->bus);
-	phb = hose->private_data;
-
 	pdn = pci_get_pdn(pdev);
 	pdn->vfs_expanded = 0;
+	pdn->m64_single_mode = false;
 
 	total_vfs = pci_sriov_get_totalvfs(pdev);
-	pdn->m64_per_iov = 1;
 	mul = phb->ioda.total_pe;
+	total_vf_bar_sz = 0;
 
 	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
 		res = &pdev->resource[i + PCI_IOV_RESOURCES];
 		if (!res->flags || res->parent)
 			continue;
 		if (!pnv_pci_is_mem_pref_64(res->flags)) {
-			dev_warn(&pdev->dev, " non M64 VF BAR%d: %pR\n",
+			dev_warn(&pdev->dev, "Don't support SR-IOV with"
+					" non M64 VF BAR%d: %pR. \n",
 				 i, res);
-			continue;
+			goto truncate_iov;
 		}
 
-		size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
+		total_vf_bar_sz += pci_iov_resource_size(pdev,
+				i + PCI_IOV_RESOURCES);
 
-		/* bigger than 64M */
-		if (size > (1 << 26)) {
-			dev_info(&pdev->dev, "PowerNV: VF BAR%d: %pR IOV size is bigger than 64M, roundup power2\n",
-				 i, res);
-			pdn->m64_per_iov = M64_PER_IOV;
+		/*
+		 * If bigger than quarter of M64 segment size, just round up
+		 * power of two.
+		 *
+		 * Generally, one M64 BAR maps one IOV BAR. To avoid conflict
+		 * with other devices, IOV BAR size is expanded to be
+		 * (total_pe * VF_BAR_size).  When VF_BAR_size is half of M64
+		 * segment size , the expanded size would equal to half of the
+		 * whole M64 space size, which will exhaust the M64 Space and
+		 * limit the system flexibility.  This is a design decision to
+		 * set the boundary to quarter of the M64 segment size.
+		 */
+		if (total_vf_bar_sz > gate) {
 			mul = roundup_pow_of_two(total_vfs);
+			dev_info(&pdev->dev,
+				"VF BAR Total IOV size %llx > %llx, roundup to %d VFs\n",
+				total_vf_bar_sz, gate, mul);
+			pdn->m64_single_mode = true;
 			break;
 		}
 	}
@@ -2781,20 +2901,31 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev)
 		res = &pdev->resource[i + PCI_IOV_RESOURCES];
 		if (!res->flags || res->parent)
 			continue;
-		if (!pnv_pci_is_mem_pref_64(res->flags)) {
-			dev_warn(&pdev->dev, "Skipping expanding VF BAR%d: %pR\n",
-				 i, res);
-			continue;
-		}
 
-		dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
 		size = pci_iov_resource_size(pdev, i + PCI_IOV_RESOURCES);
+		/*
+		 * On PHB3, the minimum size alignment of M64 BAR in single
+		 * mode is 32MB.
+		 */
+		if (pdn->m64_single_mode && (size < SZ_32M))
+			goto truncate_iov;
+		dev_dbg(&pdev->dev, " Fixing VF BAR%d: %pR to\n", i, res);
 		res->end = res->start + size * mul - 1;
 		dev_dbg(&pdev->dev, "                       %pR\n", res);
 		dev_info(&pdev->dev, "VF BAR%d: %pR (expanded to %d VFs for PE alignment)",
 			 i, res, mul);
 	}
 	pdn->vfs_expanded = mul;
+
+	return;
+
+truncate_iov:
+	/* To save MMIO space, IOV BAR is truncated. */
+	for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
+		res = &pdev->resource[i + PCI_IOV_RESOURCES];
+		res->flags = 0;
+		res->end = res->start - 1;
+	}
 }
 #endif /* CONFIG_PCI_IOV */
 
@@ -2881,6 +3012,11 @@ static void pnv_pci_ioda_setup_seg(void)
 
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 		phb = hose->private_data;
+
+		/* NPU PHB does not support IO or MMIO segmentation */
+		if (phb->type == PNV_PHB_NPU)
+			continue;
+
 		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
 			pnv_ioda_setup_pe_seg(hose, pe);
 		}
@@ -2920,6 +3056,27 @@ static void pnv_pci_ioda_create_dbgfs(void)
 #endif /* CONFIG_DEBUG_FS */
 }
 
+static void pnv_npu_ioda_fixup(void)
+{
+	bool enable_bypass;
+	struct pci_controller *hose, *tmp;
+	struct pnv_phb *phb;
+	struct pnv_ioda_pe *pe;
+
+	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+		phb = hose->private_data;
+		if (phb->type != PNV_PHB_NPU)
+			continue;
+
+		list_for_each_entry(pe, &phb->ioda.pe_dma_list, dma_link) {
+			enable_bypass = dma_get_mask(&pe->pdev->dev) ==
+				DMA_BIT_MASK(64);
+			pnv_npu_init_dma_pe(pe);
+			pnv_npu_dma_set_bypass(pe, enable_bypass);
+		}
+	}
+}
+
 static void pnv_pci_ioda_fixup(void)
 {
 	pnv_pci_ioda_setup_PEs();
@@ -2932,6 +3089,9 @@ static void pnv_pci_ioda_fixup(void)
 	eeh_init();
 	eeh_addr_cache_build();
 #endif
+
+	/* Link NPU IODA tables to their PCI devices. */
+	pnv_npu_ioda_fixup();
 }
 
 /*
@@ -2979,18 +3139,35 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
 static resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev,
 						      int resno)
 {
+	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+	struct pnv_phb *phb = hose->private_data;
 	struct pci_dn *pdn = pci_get_pdn(pdev);
-	resource_size_t align, iov_align;
-
-	iov_align = resource_size(&pdev->resource[resno]);
-	if (iov_align)
-		return iov_align;
+	resource_size_t align;
 
+	/*
+	 * On PowerNV platform, IOV BAR is mapped by M64 BAR to enable the
+	 * SR-IOV. While from hardware perspective, the range mapped by M64
+	 * BAR should be size aligned.
+	 *
+	 * When IOV BAR is mapped with M64 BAR in Single PE mode, the extra
+	 * powernv-specific hardware restriction is gone. But if just use the
+	 * VF BAR size as the alignment, PF BAR / VF BAR may be allocated with
+	 * in one segment of M64 #15, which introduces the PE conflict between
+	 * PF and VF. Based on this, the minimum alignment of an IOV BAR is
+	 * m64_segsize.
+	 *
+	 * This function returns the total IOV BAR size if M64 BAR is in
+	 * Shared PE mode or just VF BAR size if not.
+	 * If the M64 BAR is in Single PE mode, return the VF BAR size or
+	 * M64 segment size if IOV BAR size is less.
+	 */
 	align = pci_iov_resource_size(pdev, resno);
-	if (pdn->vfs_expanded)
-		return pdn->vfs_expanded * align;
+	if (!pdn->vfs_expanded)
+		return align;
+	if (pdn->m64_single_mode)
+		return max(align, (resource_size_t)phb->ioda.m64_segsize);
 
-	return align;
+	return pdn->vfs_expanded * align;
 }
 #endif /* CONFIG_PCI_IOV */
 
@@ -3034,6 +3211,7 @@ static void pnv_pci_ioda_shutdown(struct pci_controller *hose)
 
 static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
        .dma_dev_setup = pnv_pci_dma_dev_setup,
+       .dma_bus_setup = pnv_pci_dma_bus_setup,
 #ifdef CONFIG_PCI_MSI
        .setup_msi_irqs = pnv_setup_msi_irqs,
        .teardown_msi_irqs = pnv_teardown_msi_irqs,
@@ -3046,6 +3224,19 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
        .shutdown = pnv_pci_ioda_shutdown,
 };
 
+static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
+	.dma_dev_setup = pnv_pci_dma_dev_setup,
+#ifdef CONFIG_PCI_MSI
+	.setup_msi_irqs = pnv_setup_msi_irqs,
+	.teardown_msi_irqs = pnv_teardown_msi_irqs,
+#endif
+	.enable_device_hook = pnv_pci_enable_device_hook,
+	.window_alignment = pnv_pci_window_alignment,
+	.reset_secondary_bus = pnv_pci_reset_secondary_bus,
+	.dma_set_mask = pnv_npu_dma_set_mask,
+	.shutdown = pnv_pci_ioda_shutdown,
+};
+
 static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 					 u64 hub_id, int ioda_type)
 {
@@ -3101,6 +3292,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 		phb->model = PNV_PHB_MODEL_P7IOC;
 	else if (of_device_is_compatible(np, "ibm,power8-pciex"))
 		phb->model = PNV_PHB_MODEL_PHB3;
+	else if (of_device_is_compatible(np, "ibm,power8-npu-pciex"))
+		phb->model = PNV_PHB_MODEL_NPU;
 	else
 		phb->model = PNV_PHB_MODEL_UNKNOWN;
 
@@ -3201,7 +3394,11 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	 * the child P2P bridges) can form individual PE.
 	 */
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
-	hose->controller_ops = pnv_pci_ioda_controller_ops;
+
+	if (phb->type == PNV_PHB_NPU)
+		hose->controller_ops = pnv_npu_ioda_controller_ops;
+	else
+		hose->controller_ops = pnv_pci_ioda_controller_ops;
 
 #ifdef CONFIG_PCI_IOV
 	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
@@ -3236,6 +3433,11 @@ void __init pnv_pci_init_ioda2_phb(struct device_node *np)
 	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_IODA2);
 }
 
+void __init pnv_pci_init_npu_phb(struct device_node *np)
+{
+	pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU);
+}
+
 void __init pnv_pci_init_ioda_hub(struct device_node *np)
 {
 	struct device_node *phbn;
diff --git a/arch/powerpc/platforms/powernv/pci-p5ioc2.c b/arch/powerpc/platforms/powernv/pci-p5ioc2.c
deleted file mode 100644
index f2bdfea3b68d..000000000000
--- a/arch/powerpc/platforms/powernv/pci-p5ioc2.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Support PCI/PCIe on PowerNV platforms
- *
- * Currently supports only P5IOC2
- *
- * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/msi.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/msi_bitmap.h>
-#include <asm/ppc-pci.h>
-#include <asm/opal.h>
-#include <asm/iommu.h>
-#include <asm/tce.h>
-
-#include "powernv.h"
-#include "pci.h"
-
-/* For now, use a fixed amount of TCE memory for each p5ioc2
- * hub, 16M will do
- */
-#define P5IOC2_TCE_MEMORY	0x01000000
-
-#ifdef CONFIG_PCI_MSI
-static int pnv_pci_p5ioc2_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
-				    unsigned int hwirq, unsigned int virq,
-				    unsigned int is_64, struct msi_msg *msg)
-{
-	if (WARN_ON(!is_64))
-		return -ENXIO;
-	msg->data = hwirq - phb->msi_base;
-	msg->address_hi = 0x10000000;
-	msg->address_lo = 0;
-
-	return 0;
-}
-
-static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb)
-{
-	unsigned int count;
-	const __be32 *prop = of_get_property(phb->hose->dn,
-					     "ibm,opal-msi-ranges", NULL);
-	if (!prop)
-		return;
-
-	/* Don't do MSI's on p5ioc2 PCI-X are they are not properly
-	 * verified in HW
-	 */
-	if (of_device_is_compatible(phb->hose->dn, "ibm,p5ioc2-pcix"))
-		return;
-	phb->msi_base = be32_to_cpup(prop);
-	count = be32_to_cpup(prop + 1);
-	if (msi_bitmap_alloc(&phb->msi_bmp, count, phb->hose->dn)) {
-		pr_err("PCI %d: Failed to allocate MSI bitmap !\n",
-		       phb->hose->global_number);
-		return;
-	}
-	phb->msi_setup = pnv_pci_p5ioc2_msi_setup;
-	phb->msi32_support = 0;
-	pr_info(" Allocated bitmap for %d MSIs (base IRQ 0x%x)\n",
-		count, phb->msi_base);
-}
-#else
-static void pnv_pci_init_p5ioc2_msis(struct pnv_phb *phb) { }
-#endif /* CONFIG_PCI_MSI */
-
-static struct iommu_table_ops pnv_p5ioc2_iommu_ops = {
-	.set = pnv_tce_build,
-#ifdef CONFIG_IOMMU_API
-	.exchange = pnv_tce_xchg,
-#endif
-	.clear = pnv_tce_free,
-	.get = pnv_tce_get,
-};
-
-static void pnv_pci_p5ioc2_dma_dev_setup(struct pnv_phb *phb,
-					 struct pci_dev *pdev)
-{
-	struct iommu_table *tbl = phb->p5ioc2.table_group.tables[0];
-
-	if (!tbl->it_map) {
-		tbl->it_ops = &pnv_p5ioc2_iommu_ops;
-		iommu_init_table(tbl, phb->hose->node);
-		iommu_register_group(&phb->p5ioc2.table_group,
-				pci_domain_nr(phb->hose->bus), phb->opal_id);
-		INIT_LIST_HEAD_RCU(&tbl->it_group_list);
-		pnv_pci_link_table_and_group(phb->hose->node, 0,
-				tbl, &phb->p5ioc2.table_group);
-	}
-
-	set_iommu_table_base(&pdev->dev, tbl);
-	iommu_add_device(&pdev->dev);
-}
-
-static const struct pci_controller_ops pnv_pci_p5ioc2_controller_ops = {
-	.dma_dev_setup = pnv_pci_dma_dev_setup,
-#ifdef CONFIG_PCI_MSI
-       .setup_msi_irqs = pnv_setup_msi_irqs,
-       .teardown_msi_irqs = pnv_teardown_msi_irqs,
-#endif
-};
-
-static void __init pnv_pci_init_p5ioc2_phb(struct device_node *np, u64 hub_id,
-					   void *tce_mem, u64 tce_size)
-{
-	struct pnv_phb *phb;
-	const __be64 *prop64;
-	u64 phb_id;
-	int64_t rc;
-	static int primary = 1;
-	struct iommu_table_group *table_group;
-	struct iommu_table *tbl;
-
-	pr_info(" Initializing p5ioc2 PHB %s\n", np->full_name);
-
-	prop64 = of_get_property(np, "ibm,opal-phbid", NULL);
-	if (!prop64) {
-		pr_err("  Missing \"ibm,opal-phbid\" property !\n");
-		return;
-	}
-	phb_id = be64_to_cpup(prop64);
-	pr_devel("  PHB-ID  : 0x%016llx\n", phb_id);
-	pr_devel("  TCE AT  : 0x%016lx\n", __pa(tce_mem));
-	pr_devel("  TCE SZ  : 0x%016llx\n", tce_size);
-
-	rc = opal_pci_set_phb_tce_memory(phb_id, __pa(tce_mem), tce_size);
-	if (rc != OPAL_SUCCESS) {
-		pr_err("  Failed to set TCE memory, OPAL error %lld\n", rc);
-		return;
-	}
-
-	phb = memblock_virt_alloc(sizeof(struct pnv_phb), 0);
-	phb->hose = pcibios_alloc_controller(np);
-	if (!phb->hose) {
-		pr_err("  Failed to allocate PCI controller\n");
-		return;
-	}
-
-	spin_lock_init(&phb->lock);
-	phb->hose->first_busno = 0;
-	phb->hose->last_busno = 0xff;
-	phb->hose->private_data = phb;
-	phb->hose->controller_ops = pnv_pci_p5ioc2_controller_ops;
-	phb->hub_id = hub_id;
-	phb->opal_id = phb_id;
-	phb->type = PNV_PHB_P5IOC2;
-	phb->model = PNV_PHB_MODEL_P5IOC2;
-
-	phb->regs = of_iomap(np, 0);
-
-	if (phb->regs == NULL)
-		pr_err("  Failed to map registers !\n");
-	else {
-		pr_devel("  P_BUID     = 0x%08x\n", in_be32(phb->regs + 0x100));
-		pr_devel("  P_IOSZ     = 0x%08x\n", in_be32(phb->regs + 0x1b0));
-		pr_devel("  P_IO_ST    = 0x%08x\n", in_be32(phb->regs + 0x1e0));
-		pr_devel("  P_MEM1_H   = 0x%08x\n", in_be32(phb->regs + 0x1a0));
-		pr_devel("  P_MEM1_L   = 0x%08x\n", in_be32(phb->regs + 0x190));
-		pr_devel("  P_MSZ1_L   = 0x%08x\n", in_be32(phb->regs + 0x1c0));
-		pr_devel("  P_MEM_ST   = 0x%08x\n", in_be32(phb->regs + 0x1d0));
-		pr_devel("  P_MEM2_H   = 0x%08x\n", in_be32(phb->regs + 0x2c0));
-		pr_devel("  P_MEM2_L   = 0x%08x\n", in_be32(phb->regs + 0x2b0));
-		pr_devel("  P_MSZ2_H   = 0x%08x\n", in_be32(phb->regs + 0x2d0));
-		pr_devel("  P_MSZ2_L   = 0x%08x\n", in_be32(phb->regs + 0x2e0));
-	}
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(phb->hose, np, primary);
-	primary = 0;
-
-	phb->hose->ops = &pnv_pci_ops;
-
-	/* Setup MSI support */
-	pnv_pci_init_p5ioc2_msis(phb);
-
-	/* Setup TCEs */
-	phb->dma_dev_setup = pnv_pci_p5ioc2_dma_dev_setup;
-	pnv_pci_setup_iommu_table(&phb->p5ioc2.iommu_table,
-				  tce_mem, tce_size, 0,
-				  IOMMU_PAGE_SHIFT_4K);
-	/*
-	 * We do not allocate iommu_table as we do not support
-	 * hotplug or SRIOV on P5IOC2 and therefore iommu_free_table()
-	 * should not be called for phb->p5ioc2.table_group.tables[0] ever.
-	 */
-	tbl = phb->p5ioc2.table_group.tables[0] = &phb->p5ioc2.iommu_table;
-	table_group = &phb->p5ioc2.table_group;
-	table_group->tce32_start = tbl->it_offset << tbl->it_page_shift;
-	table_group->tce32_size = tbl->it_size << tbl->it_page_shift;
-}
-
-void __init pnv_pci_init_p5ioc2_hub(struct device_node *np)
-{
-	struct device_node *phbn;
-	const __be64 *prop64;
-	u64 hub_id;
-	void *tce_mem;
-	uint64_t tce_per_phb;
-	int64_t rc;
-	int phb_count = 0;
-
-	pr_info("Probing p5ioc2 IO-Hub %s\n", np->full_name);
-
-	prop64 = of_get_property(np, "ibm,opal-hubid", NULL);
-	if (!prop64) {
-		pr_err(" Missing \"ibm,opal-hubid\" property !\n");
-		return;
-	}
-	hub_id = be64_to_cpup(prop64);
-	pr_info(" HUB-ID : 0x%016llx\n", hub_id);
-
-	/* Count child PHBs and calculate TCE space per PHB */
-	for_each_child_of_node(np, phbn) {
-		if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
-		    of_device_is_compatible(phbn, "ibm,p5ioc2-pciex"))
-			phb_count++;
-	}
-
-	if (phb_count <= 0) {
-		pr_info(" No PHBs for Hub %s\n", np->full_name);
-		return;
-	}
-
-	tce_per_phb = __rounddown_pow_of_two(P5IOC2_TCE_MEMORY / phb_count);
-	pr_info(" Allocating %lld MB of TCE memory per PHB\n",
-		tce_per_phb >> 20);
-
-	/* Currently allocate 16M of TCE memory for every Hub
-	 *
-	 * XXX TODO: Make it chip local if possible
-	 */
-	tce_mem = memblock_virt_alloc(P5IOC2_TCE_MEMORY, P5IOC2_TCE_MEMORY);
-	pr_debug(" TCE    : 0x%016lx..0x%016lx\n",
-		__pa(tce_mem), __pa(tce_mem) + P5IOC2_TCE_MEMORY - 1);
-	rc = opal_pci_set_hub_tce_memory(hub_id, __pa(tce_mem),
-					P5IOC2_TCE_MEMORY);
-	if (rc != OPAL_SUCCESS) {
-		pr_err(" Failed to allocate TCE memory, OPAL error %lld\n", rc);
-		return;
-	}
-
-	/* Initialize PHBs */
-	for_each_child_of_node(np, phbn) {
-		if (of_device_is_compatible(phbn, "ibm,p5ioc2-pcix") ||
-		    of_device_is_compatible(phbn, "ibm,p5ioc2-pciex")) {
-			pnv_pci_init_p5ioc2_phb(phbn, hub_id,
-					tce_mem, tce_per_phb);
-			tce_mem += tce_per_phb;
-		}
-	}
-}
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index f2dd77234240..73c8dc2a353f 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -1,8 +1,6 @@
 /*
  * Support PCI/PCIe on PowerNV platforms
  *
- * Currently supports only P5IOC2
- *
  * Copyright 2011 Benjamin Herrenschmidt, IBM Corp.
  *
  * This program is free software; you can redistribute it and/or
@@ -382,10 +380,7 @@ static void pnv_pci_config_check_eeh(struct pci_dn *pdn)
 	 */
 	pe_no = pdn->pe_number;
 	if (pe_no == IODA_INVALID_PE) {
-		if (phb->type == PNV_PHB_P5IOC2)
-			pe_no = 0;
-		else
-			pe_no = phb->ioda.reserved_pe;
+		pe_no = phb->ioda.reserved_pe;
 	}
 
 	/*
@@ -601,6 +596,9 @@ int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
 	u64 rpn = __pa(uaddr) >> tbl->it_page_shift;
 	long i;
 
+	if (proto_tce & TCE_PCI_WRITE)
+		proto_tce |= TCE_PCI_READ;
+
 	for (i = 0; i < npages; i++) {
 		unsigned long newtce = proto_tce |
 			((rpn + i) << tbl->it_page_shift);
@@ -622,6 +620,9 @@ int pnv_tce_xchg(struct iommu_table *tbl, long index,
 
 	BUG_ON(*hpa & ~IOMMU_PAGE_MASK(tbl));
 
+	if (newtce & TCE_PCI_WRITE)
+		newtce |= TCE_PCI_READ;
+
 	oldtce = xchg(pnv_tce(tbl, idx), cpu_to_be64(newtce));
 	*hpa = be64_to_cpu(oldtce) & ~(TCE_PCI_READ | TCE_PCI_WRITE);
 	*direction = iommu_tce_direction(oldtce);
@@ -762,6 +763,26 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
 		phb->dma_dev_setup(phb, pdev);
 }
 
+void pnv_pci_dma_bus_setup(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+	struct pnv_phb *phb = hose->private_data;
+	struct pnv_ioda_pe *pe;
+
+	list_for_each_entry(pe, &phb->ioda.pe_list, list) {
+		if (!(pe->flags & (PNV_IODA_PE_BUS | PNV_IODA_PE_BUS_ALL)))
+			continue;
+
+		if (!pe->pbus)
+			continue;
+
+		if (bus->number == ((pe->rid >> 8) & 0xFF)) {
+			pe->pbus = bus;
+			break;
+		}
+	}
+}
+
 void pnv_pci_shutdown(void)
 {
 	struct pci_controller *hose;
@@ -781,7 +802,6 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk);
 void __init pnv_pci_init(void)
 {
 	struct device_node *np;
-	bool found_ioda = false;
 
 	pci_add_flags(PCI_CAN_SKIP_ISA_ALIGN);
 
@@ -789,24 +809,19 @@ void __init pnv_pci_init(void)
 	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
-	/* Look for IODA IO-Hubs. We don't support mixing IODA
-	 * and p5ioc2 due to the need to change some global
-	 * probing flags
-	 */
+	/* Look for IODA IO-Hubs. */
 	for_each_compatible_node(np, NULL, "ibm,ioda-hub") {
 		pnv_pci_init_ioda_hub(np);
-		found_ioda = true;
 	}
 
-	/* Look for p5ioc2 IO-Hubs */
-	if (!found_ioda)
-		for_each_compatible_node(np, NULL, "ibm,p5ioc2")
-			pnv_pci_init_p5ioc2_hub(np);
-
 	/* Look for ioda2 built-in PHB3's */
 	for_each_compatible_node(np, NULL, "ibm,ioda2-phb")
 		pnv_pci_init_ioda2_phb(np);
 
+	/* Look for NPU PHBs */
+	for_each_compatible_node(np, NULL, "ibm,ioda2-npu-phb")
+		pnv_pci_init_npu_phb(np);
+
 	/* Setup the linkage between OF nodes and PHBs */
 	pci_devs_phb_init();
 
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index c8ff50e90766..3f814f382b2e 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -4,17 +4,17 @@
 struct pci_dn;
 
 enum pnv_phb_type {
-	PNV_PHB_P5IOC2	= 0,
-	PNV_PHB_IODA1	= 1,
-	PNV_PHB_IODA2	= 2,
+	PNV_PHB_IODA1	= 0,
+	PNV_PHB_IODA2	= 1,
+	PNV_PHB_NPU	= 2,
 };
 
 /* Precise PHB model for error management */
 enum pnv_phb_model {
 	PNV_PHB_MODEL_UNKNOWN,
-	PNV_PHB_MODEL_P5IOC2,
 	PNV_PHB_MODEL_P7IOC,
 	PNV_PHB_MODEL_PHB3,
+	PNV_PHB_MODEL_NPU,
 };
 
 #define PNV_PCI_DIAG_BUF_SIZE	8192
@@ -24,6 +24,7 @@ enum pnv_phb_model {
 #define PNV_IODA_PE_MASTER	(1 << 3)	/* Master PE in compound case	*/
 #define PNV_IODA_PE_SLAVE	(1 << 4)	/* Slave PE in compound case	*/
 #define PNV_IODA_PE_VF		(1 << 5)	/* PE for one VF 		*/
+#define PNV_IODA_PE_PEER	(1 << 6)	/* PE has peers			*/
 
 /* Data associated with a PE, including IOMMU tracking etc.. */
 struct pnv_phb;
@@ -31,6 +32,9 @@ struct pnv_ioda_pe {
 	unsigned long		flags;
 	struct pnv_phb		*phb;
 
+#define PNV_IODA_MAX_PEER_PES	8
+	struct pnv_ioda_pe	*peers[PNV_IODA_MAX_PEER_PES];
+
 	/* A PE can be associated with a single device or an
 	 * entire bus (& children). In the former case, pdev
 	 * is populated, in the later case, pbus is.
@@ -115,81 +119,74 @@ struct pnv_phb {
 	void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
 	int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt);
 
-	union {
-		struct {
-			struct iommu_table iommu_table;
-			struct iommu_table_group table_group;
-		} p5ioc2;
-
-		struct {
-			/* Global bridge info */
-			unsigned int		total_pe;
-			unsigned int		reserved_pe;
-
-			/* 32-bit MMIO window */
-			unsigned int		m32_size;
-			unsigned int		m32_segsize;
-			unsigned int		m32_pci_base;
-
-			/* 64-bit MMIO window */
-			unsigned int		m64_bar_idx;
-			unsigned long		m64_size;
-			unsigned long		m64_segsize;
-			unsigned long		m64_base;
-			unsigned long		m64_bar_alloc;
-
-			/* IO ports */
-			unsigned int		io_size;
-			unsigned int		io_segsize;
-			unsigned int		io_pci_base;
-
-			/* PE allocation bitmap */
-			unsigned long		*pe_alloc;
-			/* PE allocation mutex */
-			struct mutex		pe_alloc_mutex;
-
-			/* M32 & IO segment maps */
-			unsigned int		*m32_segmap;
-			unsigned int		*io_segmap;
-			struct pnv_ioda_pe	*pe_array;
-
-			/* IRQ chip */
-			int			irq_chip_init;
-			struct irq_chip		irq_chip;
-
-			/* Sorted list of used PE's based
-			 * on the sequence of creation
-			 */
-			struct list_head	pe_list;
-			struct mutex            pe_list_mutex;
-
-			/* Reverse map of PEs, will have to extend if
-			 * we are to support more than 256 PEs, indexed
-			 * bus { bus, devfn }
-			 */
-			unsigned char		pe_rmap[0x10000];
-
-			/* 32-bit TCE tables allocation */
-			unsigned long		tce32_count;
-
-			/* Total "weight" for the sake of DMA resources
-			 * allocation
-			 */
-			unsigned int		dma_weight;
-			unsigned int		dma_pe_count;
-
-			/* Sorted list of used PE's, sorted at
-			 * boot for resource allocation purposes
-			 */
-			struct list_head	pe_dma_list;
-
-			/* TCE cache invalidate registers (physical and
-			 * remapped)
-			 */
-			phys_addr_t		tce_inval_reg_phys;
-			__be64 __iomem		*tce_inval_reg;
-		} ioda;
-	};
+	struct {
+		/* Global bridge info */
+		unsigned int		total_pe;
+		unsigned int		reserved_pe;
+
+		/* 32-bit MMIO window */
+		unsigned int		m32_size;
+		unsigned int		m32_segsize;
+		unsigned int		m32_pci_base;
+
+		/* 64-bit MMIO window */
+		unsigned int		m64_bar_idx;
+		unsigned long		m64_size;
+		unsigned long		m64_segsize;
+		unsigned long		m64_base;
+		unsigned long		m64_bar_alloc;
+
+		/* IO ports */
+		unsigned int		io_size;
+		unsigned int		io_segsize;
+		unsigned int		io_pci_base;
+
+		/* PE allocation bitmap */
+		unsigned long		*pe_alloc;
+		/* PE allocation mutex */
+		struct mutex		pe_alloc_mutex;
+
+		/* M32 & IO segment maps */
+		unsigned int		*m32_segmap;
+		unsigned int		*io_segmap;
+		struct pnv_ioda_pe	*pe_array;
+
+		/* IRQ chip */
+		int			irq_chip_init;
+		struct irq_chip		irq_chip;
+
+		/* Sorted list of used PE's based
+		 * on the sequence of creation
+		 */
+		struct list_head	pe_list;
+		struct mutex            pe_list_mutex;
+
+		/* Reverse map of PEs, will have to extend if
+		 * we are to support more than 256 PEs, indexed
+		 * bus { bus, devfn }
+		 */
+		unsigned char		pe_rmap[0x10000];
+
+		/* 32-bit TCE tables allocation */
+		unsigned long		tce32_count;
+
+		/* Total "weight" for the sake of DMA resources
+		 * allocation
+		 */
+		unsigned int		dma_weight;
+		unsigned int		dma_pe_count;
+
+		/* Sorted list of used PE's, sorted at
+		 * boot for resource allocation purposes
+		 */
+		struct list_head	pe_dma_list;
+
+		/* TCE cache invalidate registers (physical and
+		 * remapped)
+		 */
+		phys_addr_t		tce_inval_reg_phys;
+		__be64 __iomem		*tce_inval_reg;
+	} ioda;
 
 	/* PHB and hub status structure */
 	union {
@@ -226,16 +223,29 @@ extern void pnv_pci_unlink_table_and_group(struct iommu_table *tbl,
 extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
 				      void *tce_mem, u64 tce_size,
 				      u64 dma_offset, unsigned page_shift);
-extern void pnv_pci_init_p5ioc2_hub(struct device_node *np);
 extern void pnv_pci_init_ioda_hub(struct device_node *np);
 extern void pnv_pci_init_ioda2_phb(struct device_node *np);
+extern void pnv_pci_init_npu_phb(struct device_node *np);
 extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl,
 					__be64 *startp, __be64 *endp, bool rm);
 extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
 extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
 
 extern void pnv_pci_dma_dev_setup(struct pci_dev *pdev);
+extern void pnv_pci_dma_bus_setup(struct pci_bus *bus);
 extern int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type);
 extern void pnv_teardown_msi_irqs(struct pci_dev *pdev);
 
+/* Nvlink functions */
+extern void pnv_npu_tce_invalidate_entire(struct pnv_ioda_pe *npe);
+extern void pnv_npu_tce_invalidate(struct pnv_ioda_pe *npe,
+				       struct iommu_table *tbl,
+				       unsigned long index,
+				       unsigned long npages,
+				       bool rm);
+extern void pnv_npu_init_dma_pe(struct pnv_ioda_pe *npe);
+extern void pnv_npu_setup_dma_pe(struct pnv_ioda_pe *npe);
+extern int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe, bool enabled);
+extern int pnv_npu_dma_set_mask(struct pci_dev *npdev, u64 dma_mask);
+
 #endif /* __POWERNV_PCI_H */
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index a9a8fa37a555..1acb0c72d923 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -90,12 +90,8 @@ static void pnv_show_cpuinfo(struct seq_file *m)
 	if (root)
 		model = of_get_property(root, "model", NULL);
 	seq_printf(m, "machine\t\t: PowerNV %s\n", model);
-	if (firmware_has_feature(FW_FEATURE_OPALv3))
-		seq_printf(m, "firmware\t: OPAL v3\n");
-	else if (firmware_has_feature(FW_FEATURE_OPALv2))
-		seq_printf(m, "firmware\t: OPAL v2\n");
-	else if (firmware_has_feature(FW_FEATURE_OPAL))
-		seq_printf(m, "firmware\t: OPAL v1\n");
+	if (firmware_has_feature(FW_FEATURE_OPAL))
+		seq_printf(m, "firmware\t: OPAL\n");
 	else
 		seq_printf(m, "firmware\t: BML\n");
 	of_node_put(root);
@@ -224,9 +220,9 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary)
 {
 	xics_kexec_teardown_cpu(secondary);
 
-	/* On OPAL v3, we return all CPUs to firmware */
+	/* On OPAL, we return all CPUs to firmware */
 
-	if (!firmware_has_feature(FW_FEATURE_OPALv3))
+	if (!firmware_has_feature(FW_FEATURE_OPAL))
 		return;
 
 	if (secondary) {
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index ca264833ee64..ad7b1a3dbed0 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -61,14 +61,15 @@ static int pnv_smp_kick_cpu(int nr)
 	unsigned long start_here =
 			__pa(ppc_function_entry(generic_secondary_smp_init));
 	long rc;
+	uint8_t status;
 
 	BUG_ON(nr < 0 || nr >= NR_CPUS);
 
 	/*
-	 * If we already started or OPALv2 is not supported, we just
+	 * If we already started or OPAL is not supported, we just
 	 * kick the CPU via the PACA
 	 */
-	if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPALv2))
+	if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPAL))
 		goto kick;
 
 	/*
@@ -77,55 +78,42 @@ static int pnv_smp_kick_cpu(int nr)
 	 * first time. OPAL v3 allows us to query OPAL to know if it
 	 * has the CPUs, so we do that
 	 */
-	if (firmware_has_feature(FW_FEATURE_OPALv3)) {
-		uint8_t status;
-
-		rc = opal_query_cpu_status(pcpu, &status);
-		if (rc != OPAL_SUCCESS) {
-			pr_warn("OPAL Error %ld querying CPU %d state\n",
-				rc, nr);
-			return -ENODEV;
-		}
+	rc = opal_query_cpu_status(pcpu, &status);
+	if (rc != OPAL_SUCCESS) {
+		pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr);
+		return -ENODEV;
+	}
 
-		/*
-		 * Already started, just kick it, probably coming from
-		 * kexec and spinning
-		 */
-		if (status == OPAL_THREAD_STARTED)
-			goto kick;
+	/*
+	 * Already started, just kick it, probably coming from
+	 * kexec and spinning
+	 */
+	if (status == OPAL_THREAD_STARTED)
+		goto kick;
 
-		/*
-		 * Available/inactive, let's kick it
-		 */
-		if (status == OPAL_THREAD_INACTIVE) {
-			pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n",
-				 nr, pcpu);
-			rc = opal_start_cpu(pcpu, start_here);
-			if (rc != OPAL_SUCCESS) {
-				pr_warn("OPAL Error %ld starting CPU %d\n",
-					rc, nr);
-				return -ENODEV;
-			}
-		} else {
-			/*
-			 * An unavailable CPU (or any other unknown status)
-			 * shouldn't be started. It should also
-			 * not be in the possible map but currently it can
-			 * happen
-			 */
-			pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable"
-				 " (status %d)...\n", nr, pcpu, status);
+	/*
+	 * Available/inactive, let's kick it
+	 */
+	if (status == OPAL_THREAD_INACTIVE) {
+		pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
+		rc = opal_start_cpu(pcpu, start_here);
+		if (rc != OPAL_SUCCESS) {
+			pr_warn("OPAL Error %ld starting CPU %d\n", rc, nr);
 			return -ENODEV;
 		}
 	} else {
 		/*
-		 * On OPAL v2, we just kick it and hope for the best,
-		 * we must not test the error from opal_start_cpu() or
-		 * we would fail to get CPUs from kexec.
+		 * An unavailable CPU (or any other unknown status)
+		 * shouldn't be started. It should also
+		 * not be in the possible map but currently it can
+		 * happen
 		 */
-		opal_start_cpu(pcpu, start_here);
+		pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable"
+			 " (status %d)...\n", nr, pcpu, status);
+		return -ENODEV;
 	}
- kick:
+
+kick:
 	return smp_generic_kick_cpu(nr);
 }
 
diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c
index 503a73f59359..0babef11136f 100644
--- a/arch/powerpc/platforms/powernv/subcore.c
+++ b/arch/powerpc/platforms/powernv/subcore.c
@@ -407,7 +407,7 @@ static DEVICE_ATTR(subcores_per_core, 0644,
 
 static int subcore_init(void)
 {
-	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+	if (!cpu_has_feature(CPU_FTR_SUBCORE))
 		return 0;
 
 	/*
diff --git a/arch/powerpc/platforms/ps3/gelic_udbg.c b/arch/powerpc/platforms/ps3/gelic_udbg.c
index 20b46a19a48f..09bf24d616a5 100644
--- a/arch/powerpc/platforms/ps3/gelic_udbg.c
+++ b/arch/powerpc/platforms/ps3/gelic_udbg.c
@@ -13,6 +13,12 @@
  *
  */
 
+#include <linux/if_ether.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/udp.h>
+
 #include <asm/io.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
@@ -56,39 +62,8 @@ struct debug_block {
 	u8 pkt[1520];
 } __packed;
 
-struct ethhdr {
-	u8 dest[6];
-	u8 src[6];
-	u16 type;
-} __packed;
-
-struct vlantag {
-	u16 vlan;
-	u16 subtype;
-} __packed;
-
-struct iphdr {
-	u8 ver_len;
-	u8 dscp_ecn;
-	u16 total_length;
-	u16 ident;
-	u16 frag_off_flags;
-	u8 ttl;
-	u8 proto;
-	u16 checksum;
-	u32 src;
-	u32 dest;
-} __packed;
-
-struct udphdr {
-	u16 src;
-	u16 dest;
-	u16 len;
-	u16 checksum;
-} __packed;
-
 static __iomem struct ethhdr *h_eth;
-static __iomem struct vlantag *h_vlan;
+static __iomem struct vlan_hdr *h_vlan;
 static __iomem struct iphdr *h_ip;
 static __iomem struct udphdr *h_udp;
 
@@ -173,8 +148,8 @@ static void gelic_debug_init(void)
 
 	h_eth = (struct ethhdr *)dbg.pkt;
 
-	memset(&h_eth->dest, 0xff, 6);
-	memcpy(&h_eth->src, &mac, 6);
+	eth_broadcast_addr(h_eth->h_dest);
+	memcpy(&h_eth->h_source, &mac, ETH_ALEN);
 
 	header_size = sizeof(struct ethhdr);
 
@@ -183,28 +158,29 @@ static void gelic_debug_init(void)
 				 GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
 				 &vlan_id, &v2);
 	if (!result) {
-		h_eth->type = 0x8100;
+		h_eth->h_proto= ETH_P_8021Q;
 
-		header_size += sizeof(struct vlantag);
-		h_vlan = (struct vlantag *)(h_eth + 1);
-		h_vlan->vlan = vlan_id;
-		h_vlan->subtype = 0x0800;
+		header_size += sizeof(struct vlan_hdr);
+		h_vlan = (struct vlan_hdr *)(h_eth + 1);
+		h_vlan->h_vlan_TCI = vlan_id;
+		h_vlan->h_vlan_encapsulated_proto = ETH_P_IP;
 		h_ip = (struct iphdr *)(h_vlan + 1);
 	} else {
-		h_eth->type = 0x0800;
+		h_eth->h_proto= 0x0800;
 		h_ip = (struct iphdr *)(h_eth + 1);
 	}
 
 	header_size += sizeof(struct iphdr);
-	h_ip->ver_len = 0x45;
+	h_ip->version = 4;
+	h_ip->ihl = 5;
 	h_ip->ttl = 10;
-	h_ip->proto = 0x11;
-	h_ip->src = 0x00000000;
-	h_ip->dest = 0xffffffff;
+	h_ip->protocol = 0x11;
+	h_ip->saddr = 0x00000000;
+	h_ip->daddr = 0xffffffff;
 
 	header_size += sizeof(struct udphdr);
 	h_udp = (struct udphdr *)(h_ip + 1);
-	h_udp->src = GELIC_DEBUG_PORT;
+	h_udp->source = GELIC_DEBUG_PORT;
 	h_udp->dest = GELIC_DEBUG_PORT;
 
 	pmsgc = pmsg = (char *)(h_udp + 1);
@@ -225,16 +201,16 @@ static void gelic_sendbuf(int msgsize)
 	int i;
 
 	dbg.descr.buf_size = header_size + msgsize;
-	h_ip->total_length = msgsize + sizeof(struct udphdr) +
+	h_ip->tot_len = msgsize + sizeof(struct udphdr) +
 			     sizeof(struct iphdr);
 	h_udp->len = msgsize + sizeof(struct udphdr);
 
-	h_ip->checksum = 0;
+	h_ip->check = 0;
 	sum = 0;
 	p = (u16 *)h_ip;
 	for (i = 0; i < 5; i++)
 		sum += *p++;
-	h_ip->checksum = ~(sum + (sum >> 16));
+	h_ip->check = ~(sum + (sum >> 16));
 
 	dbg.descr.dmac_cmd_status = GELIC_DESCR_DMA_CMD_NO_CHKSUM |
 				    GELIC_DESCR_TX_DMA_FRAME_TAIL;
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 638c4060938e..b831638e6f4a 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -78,7 +78,7 @@ struct ps3_bmp {
 /**
  * struct ps3_private - a per cpu data structure
  * @bmp: ps3_bmp structure
- * @bmp_lock: Syncronize access to bmp.
+ * @bmp_lock: Synchronize access to bmp.
  * @ipi_debug_brk_mask: Mask for debug break IPIs
  * @ppe_id: HV logical_ppe_id
  * @thread_id: HV thread_id
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index f244dcb4f2cf..2b93ae8d557a 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -20,7 +20,6 @@
 #include <linux/of.h>
 
 #include "of_helpers.h"
-#include "offline_states.h"
 #include "pseries.h"
 
 #include <asm/prom.h>
@@ -338,185 +337,6 @@ int dlpar_release_drc(u32 drc_index)
 	return 0;
 }
 
-#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-
-static int dlpar_online_cpu(struct device_node *dn)
-{
-	int rc = 0;
-	unsigned int cpu;
-	int len, nthreads, i;
-	const __be32 *intserv;
-	u32 thread;
-
-	intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
-	if (!intserv)
-		return -EINVAL;
-
-	nthreads = len / sizeof(u32);
-
-	cpu_maps_update_begin();
-	for (i = 0; i < nthreads; i++) {
-		thread = be32_to_cpu(intserv[i]);
-		for_each_present_cpu(cpu) {
-			if (get_hard_smp_processor_id(cpu) != thread)
-				continue;
-			BUG_ON(get_cpu_current_state(cpu)
-					!= CPU_STATE_OFFLINE);
-			cpu_maps_update_done();
-			rc = device_online(get_cpu_device(cpu));
-			if (rc)
-				goto out;
-			cpu_maps_update_begin();
-
-			break;
-		}
-		if (cpu == num_possible_cpus())
-			printk(KERN_WARNING "Could not find cpu to online "
-			       "with physical id 0x%x\n", thread);
-	}
-	cpu_maps_update_done();
-
-out:
-	return rc;
-
-}
-
-static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
-{
-	struct device_node *dn, *parent;
-	u32 drc_index;
-	int rc;
-
-	rc = kstrtou32(buf, 0, &drc_index);
-	if (rc)
-		return -EINVAL;
-
-	rc = dlpar_acquire_drc(drc_index);
-	if (rc)
-		return -EINVAL;
-
-	parent = of_find_node_by_path("/cpus");
-	if (!parent)
-		return -ENODEV;
-
-	dn = dlpar_configure_connector(cpu_to_be32(drc_index), parent);
-	of_node_put(parent);
-	if (!dn) {
-		dlpar_release_drc(drc_index);
-		return -EINVAL;
-	}
-
-	rc = dlpar_attach_node(dn);
-	if (rc) {
-		dlpar_release_drc(drc_index);
-		dlpar_free_cc_nodes(dn);
-		return rc;
-	}
-
-	rc = dlpar_online_cpu(dn);
-	if (rc)
-		return rc;
-
-	return count;
-}
-
-static int dlpar_offline_cpu(struct device_node *dn)
-{
-	int rc = 0;
-	unsigned int cpu;
-	int len, nthreads, i;
-	const __be32 *intserv;
-	u32 thread;
-
-	intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
-	if (!intserv)
-		return -EINVAL;
-
-	nthreads = len / sizeof(u32);
-
-	cpu_maps_update_begin();
-	for (i = 0; i < nthreads; i++) {
-		thread = be32_to_cpu(intserv[i]);
-		for_each_present_cpu(cpu) {
-			if (get_hard_smp_processor_id(cpu) != thread)
-				continue;
-
-			if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE)
-				break;
-
-			if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
-				set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
-				cpu_maps_update_done();
-				rc = device_offline(get_cpu_device(cpu));
-				if (rc)
-					goto out;
-				cpu_maps_update_begin();
-				break;
-
-			}
-
-			/*
-			 * The cpu is in CPU_STATE_INACTIVE.
-			 * Upgrade it's state to CPU_STATE_OFFLINE.
-			 */
-			set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
-			BUG_ON(plpar_hcall_norets(H_PROD, thread)
-								!= H_SUCCESS);
-			__cpu_die(cpu);
-			break;
-		}
-		if (cpu == num_possible_cpus())
-			printk(KERN_WARNING "Could not find cpu to offline "
-			       "with physical id 0x%x\n", thread);
-	}
-	cpu_maps_update_done();
-
-out:
-	return rc;
-
-}
-
-static ssize_t dlpar_cpu_release(const char *buf, size_t count)
-{
-	struct device_node *dn;
-	u32 drc_index;
-	int rc;
-
-	dn = of_find_node_by_path(buf);
-	if (!dn)
-		return -EINVAL;
-
-	rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index);
-	if (rc) {
-		of_node_put(dn);
-		return -EINVAL;
-	}
-
-	rc = dlpar_offline_cpu(dn);
-	if (rc) {
-		of_node_put(dn);
-		return -EINVAL;
-	}
-
-	rc = dlpar_release_drc(drc_index);
-	if (rc) {
-		of_node_put(dn);
-		return rc;
-	}
-
-	rc = dlpar_detach_node(dn);
-	if (rc) {
-		dlpar_acquire_drc(drc_index);
-		return rc;
-	}
-
-	of_node_put(dn);
-
-	return count;
-}
-
-#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
-
 static int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_elog)
 {
 	int rc;
@@ -536,6 +356,9 @@ static int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_elog)
 	case PSERIES_HP_ELOG_RESOURCE_MEM:
 		rc = dlpar_memory(hp_elog);
 		break;
+	case PSERIES_HP_ELOG_RESOURCE_CPU:
+		rc = dlpar_cpu(hp_elog);
+		break;
 	default:
 		pr_warn_ratelimited("Invalid resource (%d) specified\n",
 				    hp_elog->resource);
@@ -565,6 +388,9 @@ static ssize_t dlpar_store(struct class *class, struct class_attribute *attr,
 	if (!strncmp(arg, "memory", 6)) {
 		hp_elog->resource = PSERIES_HP_ELOG_RESOURCE_MEM;
 		arg += strlen("memory ");
+	} else if (!strncmp(arg, "cpu", 3)) {
+		hp_elog->resource = PSERIES_HP_ELOG_RESOURCE_CPU;
+		arg += strlen("cpu ");
 	} else {
 		pr_err("Invalid resource specified: \"%s\"\n", buf);
 		rc = -EINVAL;
@@ -624,16 +450,7 @@ static CLASS_ATTR(dlpar, S_IWUSR, NULL, dlpar_store);
 
 static int __init pseries_dlpar_init(void)
 {
-	int rc;
-
-#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
-	ppc_md.cpu_probe = dlpar_cpu_probe;
-	ppc_md.cpu_release = dlpar_cpu_release;
-#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
-
-	rc = sysfs_create_file(kernel_kobj, &class_attr_dlpar.attr);
-
-	return rc;
+	return sysfs_create_file(kernel_kobj, &class_attr_dlpar.attr);
 }
 machine_device_initcall(pseries, pseries_dlpar_init);
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index 62475440fd45..282837a1d74b 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -18,12 +18,15 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#define pr_fmt(fmt)     "pseries-hotplug-cpu: " fmt
+
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/sched.h>	/* for idle_task_exit */
 #include <linux/cpu.h>
 #include <linux/of.h>
+#include <linux/slab.h>
 #include <asm/prom.h>
 #include <asm/rtas.h>
 #include <asm/firmware.h>
@@ -32,6 +35,7 @@
 #include <asm/xics.h>
 #include <asm/plpar_wrappers.h>
 
+#include "pseries.h"
 #include "offline_states.h"
 
 /* This version can't take the spinlock, because it never returns */
@@ -43,20 +47,14 @@ static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE;
 
 static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE;
 
-static int cede_offline_enabled __read_mostly = 1;
+static bool cede_offline_enabled __read_mostly = true;
 
 /*
  * Enable/disable cede_offline when available.
  */
 static int __init setup_cede_offline(char *str)
 {
-	if (!strcmp(str, "off"))
-		cede_offline_enabled = 0;
-	else if (!strcmp(str, "on"))
-		cede_offline_enabled = 1;
-	else
-		return 0;
-	return 1;
+	return (kstrtobool(str, &cede_offline_enabled) == 0);
 }
 
 __setup("cede_offline=", setup_cede_offline);
@@ -88,13 +86,7 @@ void set_default_offline_state(int cpu)
 
 static void rtas_stop_self(void)
 {
-	static struct rtas_args args = {
-		.nargs = 0,
-		.nret = cpu_to_be32(1),
-		.rets = &args.args[0],
-	};
-
-	args.token = cpu_to_be32(rtas_stop_self_token);
+	static struct rtas_args args;
 
 	local_irq_disable();
 
@@ -102,7 +94,8 @@ static void rtas_stop_self(void)
 
 	printk("cpu %u (hwid %u) Ready to die...\n",
 	       smp_processor_id(), hard_smp_processor_id());
-	enter_rtas(__pa(&args));
+
+	rtas_call_unlocked(&args, rtas_stop_self_token, 0, 1, NULL);
 
 	panic("Alas, I survived.\n");
 }
@@ -339,6 +332,536 @@ static void pseries_remove_processor(struct device_node *np)
 	cpu_maps_update_done();
 }
 
+static int dlpar_online_cpu(struct device_node *dn)
+{
+	int rc = 0;
+	unsigned int cpu;
+	int len, nthreads, i;
+	const __be32 *intserv;
+	u32 thread;
+
+	intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return -EINVAL;
+
+	nthreads = len / sizeof(u32);
+
+	cpu_maps_update_begin();
+	for (i = 0; i < nthreads; i++) {
+		thread = be32_to_cpu(intserv[i]);
+		for_each_present_cpu(cpu) {
+			if (get_hard_smp_processor_id(cpu) != thread)
+				continue;
+			BUG_ON(get_cpu_current_state(cpu)
+					!= CPU_STATE_OFFLINE);
+			cpu_maps_update_done();
+			rc = device_online(get_cpu_device(cpu));
+			if (rc)
+				goto out;
+			cpu_maps_update_begin();
+
+			break;
+		}
+		if (cpu == num_possible_cpus())
+			printk(KERN_WARNING "Could not find cpu to online "
+			       "with physical id 0x%x\n", thread);
+	}
+	cpu_maps_update_done();
+
+out:
+	return rc;
+
+}
+
+static bool dlpar_cpu_exists(struct device_node *parent, u32 drc_index)
+{
+	struct device_node *child = NULL;
+	u32 my_drc_index;
+	bool found;
+	int rc;
+
+	/* Assume cpu doesn't exist */
+	found = false;
+
+	for_each_child_of_node(parent, child) {
+		rc = of_property_read_u32(child, "ibm,my-drc-index",
+					  &my_drc_index);
+		if (rc)
+			continue;
+
+		if (my_drc_index == drc_index) {
+			of_node_put(child);
+			found = true;
+			break;
+		}
+	}
+
+	return found;
+}
+
+static bool valid_cpu_drc_index(struct device_node *parent, u32 drc_index)
+{
+	bool found = false;
+	int rc, index;
+
+	index = 0;
+	while (!found) {
+		u32 drc;
+
+		rc = of_property_read_u32_index(parent, "ibm,drc-indexes",
+						index++, &drc);
+		if (rc)
+			break;
+
+		if (drc == drc_index)
+			found = true;
+	}
+
+	return found;
+}
+
+static ssize_t dlpar_cpu_add(u32 drc_index)
+{
+	struct device_node *dn, *parent;
+	int rc, saved_rc;
+
+	pr_debug("Attempting to add CPU, drc index: %x\n", drc_index);
+
+	parent = of_find_node_by_path("/cpus");
+	if (!parent) {
+		pr_warn("Failed to find CPU root node \"/cpus\"\n");
+		return -ENODEV;
+	}
+
+	if (dlpar_cpu_exists(parent, drc_index)) {
+		of_node_put(parent);
+		pr_warn("CPU with drc index %x already exists\n", drc_index);
+		return -EINVAL;
+	}
+
+	if (!valid_cpu_drc_index(parent, drc_index)) {
+		of_node_put(parent);
+		pr_warn("Cannot find CPU (drc index %x) to add.\n", drc_index);
+		return -EINVAL;
+	}
+
+	rc = dlpar_acquire_drc(drc_index);
+	if (rc) {
+		pr_warn("Failed to acquire DRC, rc: %d, drc index: %x\n",
+			rc, drc_index);
+		of_node_put(parent);
+		return -EINVAL;
+	}
+
+	dn = dlpar_configure_connector(cpu_to_be32(drc_index), parent);
+	of_node_put(parent);
+	if (!dn) {
+		pr_warn("Failed call to configure-connector, drc index: %x\n",
+			drc_index);
+		dlpar_release_drc(drc_index);
+		return -EINVAL;
+	}
+
+	rc = dlpar_attach_node(dn);
+	if (rc) {
+		saved_rc = rc;
+		pr_warn("Failed to attach node %s, rc: %d, drc index: %x\n",
+			dn->name, rc, drc_index);
+
+		rc = dlpar_release_drc(drc_index);
+		if (!rc)
+			dlpar_free_cc_nodes(dn);
+
+		return saved_rc;
+	}
+
+	rc = dlpar_online_cpu(dn);
+	if (rc) {
+		saved_rc = rc;
+		pr_warn("Failed to online cpu %s, rc: %d, drc index: %x\n",
+			dn->name, rc, drc_index);
+
+		rc = dlpar_detach_node(dn);
+		if (!rc)
+			dlpar_release_drc(drc_index);
+
+		return saved_rc;
+	}
+
+	pr_debug("Successfully added CPU %s, drc index: %x\n", dn->name,
+		 drc_index);
+	return rc;
+}
+
+static int dlpar_offline_cpu(struct device_node *dn)
+{
+	int rc = 0;
+	unsigned int cpu;
+	int len, nthreads, i;
+	const __be32 *intserv;
+	u32 thread;
+
+	intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return -EINVAL;
+
+	nthreads = len / sizeof(u32);
+
+	cpu_maps_update_begin();
+	for (i = 0; i < nthreads; i++) {
+		thread = be32_to_cpu(intserv[i]);
+		for_each_present_cpu(cpu) {
+			if (get_hard_smp_processor_id(cpu) != thread)
+				continue;
+
+			if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE)
+				break;
+
+			if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
+				set_preferred_offline_state(cpu,
+							    CPU_STATE_OFFLINE);
+				cpu_maps_update_done();
+				rc = device_offline(get_cpu_device(cpu));
+				if (rc)
+					goto out;
+				cpu_maps_update_begin();
+				break;
+
+			}
+
+			/*
+			 * The cpu is in CPU_STATE_INACTIVE.
+			 * Upgrade it's state to CPU_STATE_OFFLINE.
+			 */
+			set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
+			BUG_ON(plpar_hcall_norets(H_PROD, thread)
+								!= H_SUCCESS);
+			__cpu_die(cpu);
+			break;
+		}
+		if (cpu == num_possible_cpus())
+			printk(KERN_WARNING "Could not find cpu to offline with physical id 0x%x\n", thread);
+	}
+	cpu_maps_update_done();
+
+out:
+	return rc;
+
+}
+
+static ssize_t dlpar_cpu_remove(struct device_node *dn, u32 drc_index)
+{
+	int rc;
+
+	pr_debug("Attemping to remove CPU %s, drc index: %x\n",
+		 dn->name, drc_index);
+
+	rc = dlpar_offline_cpu(dn);
+	if (rc) {
+		pr_warn("Failed to offline CPU %s, rc: %d\n", dn->name, rc);
+		return -EINVAL;
+	}
+
+	rc = dlpar_release_drc(drc_index);
+	if (rc) {
+		pr_warn("Failed to release drc (%x) for CPU %s, rc: %d\n",
+			drc_index, dn->name, rc);
+		dlpar_online_cpu(dn);
+		return rc;
+	}
+
+	rc = dlpar_detach_node(dn);
+	if (rc) {
+		int saved_rc = rc;
+
+		pr_warn("Failed to detach CPU %s, rc: %d", dn->name, rc);
+
+		rc = dlpar_acquire_drc(drc_index);
+		if (!rc)
+			dlpar_online_cpu(dn);
+
+		return saved_rc;
+	}
+
+	pr_debug("Successfully removed CPU, drc index: %x\n", drc_index);
+	return 0;
+}
+
+static struct device_node *cpu_drc_index_to_dn(u32 drc_index)
+{
+	struct device_node *dn;
+	u32 my_index;
+	int rc;
+
+	for_each_node_by_type(dn, "cpu") {
+		rc = of_property_read_u32(dn, "ibm,my-drc-index", &my_index);
+		if (rc)
+			continue;
+
+		if (my_index == drc_index)
+			break;
+	}
+
+	return dn;
+}
+
+static int dlpar_cpu_remove_by_index(u32 drc_index)
+{
+	struct device_node *dn;
+	int rc;
+
+	dn = cpu_drc_index_to_dn(drc_index);
+	if (!dn) {
+		pr_warn("Cannot find CPU (drc index %x) to remove\n",
+			drc_index);
+		return -ENODEV;
+	}
+
+	rc = dlpar_cpu_remove(dn, drc_index);
+	of_node_put(dn);
+	return rc;
+}
+
+static int find_dlpar_cpus_to_remove(u32 *cpu_drcs, int cpus_to_remove)
+{
+	struct device_node *dn;
+	int cpus_found = 0;
+	int rc;
+
+	/* We want to find cpus_to_remove + 1 CPUs to ensure we do not
+	 * remove the last CPU.
+	 */
+	for_each_node_by_type(dn, "cpu") {
+		cpus_found++;
+
+		if (cpus_found > cpus_to_remove) {
+			of_node_put(dn);
+			break;
+		}
+
+		/* Note that cpus_found is always 1 ahead of the index
+		 * into the cpu_drcs array, so we use cpus_found - 1
+		 */
+		rc = of_property_read_u32(dn, "ibm,my-drc-index",
+					  &cpu_drcs[cpus_found - 1]);
+		if (rc) {
+			pr_warn("Error occurred getting drc-index for %s\n",
+				dn->name);
+			of_node_put(dn);
+			return -1;
+		}
+	}
+
+	if (cpus_found < cpus_to_remove) {
+		pr_warn("Failed to find enough CPUs (%d of %d) to remove\n",
+			cpus_found, cpus_to_remove);
+	} else if (cpus_found == cpus_to_remove) {
+		pr_warn("Cannot remove all CPUs\n");
+	}
+
+	return cpus_found;
+}
+
+static int dlpar_cpu_remove_by_count(u32 cpus_to_remove)
+{
+	u32 *cpu_drcs;
+	int cpus_found;
+	int cpus_removed = 0;
+	int i, rc;
+
+	pr_debug("Attempting to hot-remove %d CPUs\n", cpus_to_remove);
+
+	cpu_drcs = kcalloc(cpus_to_remove, sizeof(*cpu_drcs), GFP_KERNEL);
+	if (!cpu_drcs)
+		return -EINVAL;
+
+	cpus_found = find_dlpar_cpus_to_remove(cpu_drcs, cpus_to_remove);
+	if (cpus_found <= cpus_to_remove) {
+		kfree(cpu_drcs);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cpus_to_remove; i++) {
+		rc = dlpar_cpu_remove_by_index(cpu_drcs[i]);
+		if (rc)
+			break;
+
+		cpus_removed++;
+	}
+
+	if (cpus_removed != cpus_to_remove) {
+		pr_warn("CPU hot-remove failed, adding back removed CPUs\n");
+
+		for (i = 0; i < cpus_removed; i++)
+			dlpar_cpu_add(cpu_drcs[i]);
+
+		rc = -EINVAL;
+	} else {
+		rc = 0;
+	}
+
+	kfree(cpu_drcs);
+	return rc;
+}
+
+static int find_dlpar_cpus_to_add(u32 *cpu_drcs, u32 cpus_to_add)
+{
+	struct device_node *parent;
+	int cpus_found = 0;
+	int index, rc;
+
+	parent = of_find_node_by_path("/cpus");
+	if (!parent) {
+		pr_warn("Could not find CPU root node in device tree\n");
+		kfree(cpu_drcs);
+		return -1;
+	}
+
+	/* Search the ibm,drc-indexes array for possible CPU drcs to
+	 * add. Note that the format of the ibm,drc-indexes array is
+	 * the number of entries in the array followed by the array
+	 * of drc values so we start looking at index = 1.
+	 */
+	index = 1;
+	while (cpus_found < cpus_to_add) {
+		u32 drc;
+
+		rc = of_property_read_u32_index(parent, "ibm,drc-indexes",
+						index++, &drc);
+		if (rc)
+			break;
+
+		if (dlpar_cpu_exists(parent, drc))
+			continue;
+
+		cpu_drcs[cpus_found++] = drc;
+	}
+
+	of_node_put(parent);
+	return cpus_found;
+}
+
+static int dlpar_cpu_add_by_count(u32 cpus_to_add)
+{
+	u32 *cpu_drcs;
+	int cpus_added = 0;
+	int cpus_found;
+	int i, rc;
+
+	pr_debug("Attempting to hot-add %d CPUs\n", cpus_to_add);
+
+	cpu_drcs = kcalloc(cpus_to_add, sizeof(*cpu_drcs), GFP_KERNEL);
+	if (!cpu_drcs)
+		return -EINVAL;
+
+	cpus_found = find_dlpar_cpus_to_add(cpu_drcs, cpus_to_add);
+	if (cpus_found < cpus_to_add) {
+		pr_warn("Failed to find enough CPUs (%d of %d) to add\n",
+			cpus_found, cpus_to_add);
+		kfree(cpu_drcs);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cpus_to_add; i++) {
+		rc = dlpar_cpu_add(cpu_drcs[i]);
+		if (rc)
+			break;
+
+		cpus_added++;
+	}
+
+	if (cpus_added < cpus_to_add) {
+		pr_warn("CPU hot-add failed, removing any added CPUs\n");
+
+		for (i = 0; i < cpus_added; i++)
+			dlpar_cpu_remove_by_index(cpu_drcs[i]);
+
+		rc = -EINVAL;
+	} else {
+		rc = 0;
+	}
+
+	kfree(cpu_drcs);
+	return rc;
+}
+
+int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
+{
+	u32 count, drc_index;
+	int rc;
+
+	count = hp_elog->_drc_u.drc_count;
+	drc_index = hp_elog->_drc_u.drc_index;
+
+	lock_device_hotplug();
+
+	switch (hp_elog->action) {
+	case PSERIES_HP_ELOG_ACTION_REMOVE:
+		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
+			rc = dlpar_cpu_remove_by_count(count);
+		else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
+			rc = dlpar_cpu_remove_by_index(drc_index);
+		else
+			rc = -EINVAL;
+		break;
+	case PSERIES_HP_ELOG_ACTION_ADD:
+		if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT)
+			rc = dlpar_cpu_add_by_count(count);
+		else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX)
+			rc = dlpar_cpu_add(drc_index);
+		else
+			rc = -EINVAL;
+		break;
+	default:
+		pr_err("Invalid action (%d) specified\n", hp_elog->action);
+		rc = -EINVAL;
+		break;
+	}
+
+	unlock_device_hotplug();
+	return rc;
+}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+
+static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
+{
+	u32 drc_index;
+	int rc;
+
+	rc = kstrtou32(buf, 0, &drc_index);
+	if (rc)
+		return -EINVAL;
+
+	rc = dlpar_cpu_add(drc_index);
+
+	return rc ? rc : count;
+}
+
+static ssize_t dlpar_cpu_release(const char *buf, size_t count)
+{
+	struct device_node *dn;
+	u32 drc_index;
+	int rc;
+
+	dn = of_find_node_by_path(buf);
+	if (!dn)
+		return -EINVAL;
+
+	rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index);
+	if (rc) {
+		of_node_put(dn);
+		return -EINVAL;
+	}
+
+	rc = dlpar_cpu_remove(dn, drc_index);
+	of_node_put(dn);
+
+	return rc ? rc : count;
+}
+
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
 static int pseries_smp_notifier(struct notifier_block *nb,
 				unsigned long action, void *data)
 {
@@ -385,6 +908,11 @@ static int __init pseries_cpu_hotplug_init(void)
 	int cpu;
 	int qcss_tok;
 
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+	ppc_md.cpu_probe = dlpar_cpu_probe;
+	ppc_md.cpu_release = dlpar_cpu_release;
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
 	for_each_node_by_name(np, "interrupt-controller") {
 		typep = of_get_property(np, "compatible", NULL);
 		if (strstr(typep, "open-pic")) {
diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c
index 849b29b3e9ae..74da18de853a 100644
--- a/arch/powerpc/platforms/pseries/hvconsole.c
+++ b/arch/powerpc/platforms/pseries/hvconsole.c
@@ -31,7 +31,7 @@
 #include <asm/plpar_wrappers.h>
 
 /**
- * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper
+ * hvc_get_chars - retrieve characters from firmware for denoted vterm adapter
  * @vtermno: The vtermno or unit_address of the adapter from which to fetch the
  *	data.
  * @buf: The character buffer into which to put the character data fetched from
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index b7a67e3d2201..2415a0d31f8f 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -315,48 +315,48 @@ static long pSeries_lpar_hpte_updatepp(unsigned long slot,
 	return 0;
 }
 
-static unsigned long pSeries_lpar_hpte_getword0(unsigned long slot)
+static long __pSeries_lpar_hpte_find(unsigned long want_v, unsigned long hpte_group)
 {
-	unsigned long dword0;
-	unsigned long lpar_rc;
-	unsigned long dummy_word1;
-	unsigned long flags;
+	long lpar_rc;
+	unsigned long i, j;
+	struct {
+		unsigned long pteh;
+		unsigned long ptel;
+	} ptes[4];
 
-	/* Read 1 pte at a time                        */
-	/* Do not need RPN to logical page translation */
-	/* No cross CEC PFT access                     */
-	flags = 0;
+	for (i = 0; i < HPTES_PER_GROUP; i += 4, hpte_group += 4) {
 
-	lpar_rc = plpar_pte_read(flags, slot, &dword0, &dummy_word1);
+		lpar_rc = plpar_pte_read_4(0, hpte_group, (void *)ptes);
+		if (lpar_rc != H_SUCCESS)
+			continue;
 
-	BUG_ON(lpar_rc != H_SUCCESS);
+		for (j = 0; j < 4; j++) {
+			if (HPTE_V_COMPARE(ptes[j].pteh, want_v) &&
+			    (ptes[j].pteh & HPTE_V_VALID))
+				return i + j;
+		}
+	}
 
-	return dword0;
+	return -1;
 }
 
 static long pSeries_lpar_hpte_find(unsigned long vpn, int psize, int ssize)
 {
-	unsigned long hash;
-	unsigned long i;
 	long slot;
-	unsigned long want_v, hpte_v;
+	unsigned long hash;
+	unsigned long want_v;
+	unsigned long hpte_group;
 
 	hash = hpt_hash(vpn, mmu_psize_defs[psize].shift, ssize);
 	want_v = hpte_encode_avpn(vpn, psize, ssize);
 
 	/* Bolted entries are always in the primary group */
-	slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
-	for (i = 0; i < HPTES_PER_GROUP; i++) {
-		hpte_v = pSeries_lpar_hpte_getword0(slot);
-
-		if (HPTE_V_COMPARE(hpte_v, want_v) && (hpte_v & HPTE_V_VALID))
-			/* HPTE matches */
-			return slot;
-		++slot;
-	}
-
-	return -1;
-} 
+	hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+	slot = __pSeries_lpar_hpte_find(want_v, hpte_group);
+	if (slot < 0)
+		return -1;
+	return hpte_group + slot;
+}
 
 static void pSeries_lpar_hpte_updateboltedpp(unsigned long newpp,
 					     unsigned long ea,
@@ -396,6 +396,7 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
 	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
 /*
  * Limit iterations holding pSeries_lpar_tlbie_lock to 3. We also need
  * to make sure that we avoid bouncing the hypervisor tlbie lock.
@@ -494,9 +495,18 @@ static void pSeries_lpar_hugepage_invalidate(unsigned long vsid,
 		__pSeries_lpar_hugepage_invalidate(slot_array, vpn_array,
 						   index, psize, ssize);
 }
+#else
+static void pSeries_lpar_hugepage_invalidate(unsigned long vsid,
+					     unsigned long addr,
+					     unsigned char *hpte_slot_array,
+					     int psize, int ssize, int local)
+{
+	WARN(1, "%s called without THP support\n", __func__);
+}
+#endif
 
-static void pSeries_lpar_hpte_removebolted(unsigned long ea,
-					   int psize, int ssize)
+static int pSeries_lpar_hpte_removebolted(unsigned long ea,
+					  int psize, int ssize)
 {
 	unsigned long vpn;
 	unsigned long slot, vsid;
@@ -505,11 +515,14 @@ static void pSeries_lpar_hpte_removebolted(unsigned long ea,
 	vpn = hpt_vpn(ea, vsid, ssize);
 
 	slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
-	BUG_ON(slot == -1);
+	if (slot == -1)
+		return -ENOENT;
+
 	/*
 	 * lpar doesn't use the passed actual page size
 	 */
 	pSeries_lpar_hpte_invalidate(slot, vpn, psize, 0, ssize, 0);
+	return 0;
 }
 
 /*
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 8411c27293e4..7aa83f00ac62 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -73,6 +73,15 @@ static inline int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
 }
 #endif
 
+#ifdef CONFIG_HOTPLUG_CPU
+int dlpar_cpu(struct pseries_hp_errorlog *hp_elog);
+#else
+static inline int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
+{
+	return -EOPNOTSUPP;
+}
+#endif
+
 /* PCI root bridge prepare function override for pseries */
 struct pci_host_bridge;
 int pseries_root_bridge_prepare(struct pci_host_bridge *bridge);
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 3b6647e574b6..9a3e27b863ce 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -40,6 +40,9 @@ static int ras_check_exception_token;
 #define EPOW_SENSOR_TOKEN	9
 #define EPOW_SENSOR_INDEX	0
 
+/* EPOW events counter variable */
+static int num_epow_events;
+
 static irqreturn_t ras_epow_interrupt(int irq, void *dev_id);
 static irqreturn_t ras_error_interrupt(int irq, void *dev_id);
 
@@ -82,32 +85,30 @@ static void handle_system_shutdown(char event_modifier)
 {
 	switch (event_modifier) {
 	case EPOW_SHUTDOWN_NORMAL:
-		pr_emerg("Firmware initiated power off");
+		pr_emerg("Power off requested\n");
 		orderly_poweroff(true);
 		break;
 
 	case EPOW_SHUTDOWN_ON_UPS:
-		pr_emerg("Loss of power reported by firmware, system is "
-			"running on UPS/battery");
-		pr_emerg("Check RTAS error log for details");
+		pr_emerg("Loss of system power detected. System is running on"
+			 " UPS/battery. Check RTAS error log for details\n");
 		orderly_poweroff(true);
 		break;
 
 	case EPOW_SHUTDOWN_LOSS_OF_CRITICAL_FUNCTIONS:
-		pr_emerg("Loss of system critical functions reported by "
-			"firmware");
-		pr_emerg("Check RTAS error log for details");
+		pr_emerg("Loss of system critical functions detected. Check"
+			 " RTAS error log for details\n");
 		orderly_poweroff(true);
 		break;
 
 	case EPOW_SHUTDOWN_AMBIENT_TEMPERATURE_TOO_HIGH:
-		pr_emerg("Ambient temperature too high reported by firmware");
-		pr_emerg("Check RTAS error log for details");
+		pr_emerg("High ambient temperature detected. Check RTAS"
+			 " error log for details\n");
 		orderly_poweroff(true);
 		break;
 
 	default:
-		pr_err("Unknown power/cooling shutdown event (modifier %d)",
+		pr_err("Unknown power/cooling shutdown event (modifier = %d)\n",
 			event_modifier);
 	}
 }
@@ -145,17 +146,20 @@ static void rtas_parse_epow_errlog(struct rtas_error_log *log)
 
 	switch (action_code) {
 	case EPOW_RESET:
-		pr_err("Non critical power or cooling issue cleared");
+		if (num_epow_events) {
+			pr_info("Non critical power/cooling issue cleared\n");
+			num_epow_events--;
+		}
 		break;
 
 	case EPOW_WARN_COOLING:
-		pr_err("Non critical cooling issue reported by firmware");
-		pr_err("Check RTAS error log for details");
+		pr_info("Non-critical cooling issue detected. Check RTAS error"
+			" log for details\n");
 		break;
 
 	case EPOW_WARN_POWER:
-		pr_err("Non critical power issue reported by firmware");
-		pr_err("Check RTAS error log for details");
+		pr_info("Non-critical power issue detected. Check RTAS error"
+			" log for details\n");
 		break;
 
 	case EPOW_SYSTEM_SHUTDOWN:
@@ -163,23 +167,27 @@ static void rtas_parse_epow_errlog(struct rtas_error_log *log)
 		break;
 
 	case EPOW_SYSTEM_HALT:
-		pr_emerg("Firmware initiated power off");
+		pr_emerg("Critical power/cooling issue detected. Check RTAS"
+			 " error log for details. Powering off.\n");
 		orderly_poweroff(true);
 		break;
 
 	case EPOW_MAIN_ENCLOSURE:
 	case EPOW_POWER_OFF:
-		pr_emerg("Critical power/cooling issue reported by firmware");
-		pr_emerg("Check RTAS error log for details");
-		pr_emerg("Immediate power off");
+		pr_emerg("System about to lose power. Check RTAS error log "
+			 " for details. Powering off immediately.\n");
 		emergency_sync();
 		kernel_power_off();
 		break;
 
 	default:
-		pr_err("Unknown power/cooling event (action code %d)",
+		pr_err("Unknown power/cooling event (action code  = %d)\n",
 			action_code);
 	}
+
+	/* Increment epow events counter variable */
+	if (action_code != EPOW_RESET)
+		num_epow_events++;
 }
 
 /* Handle environmental and power warning (EPOW) interrupts. */
@@ -249,13 +257,12 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id)
 	log_error(ras_log_buf, ERR_TYPE_RTAS_LOG, fatal);
 
 	if (fatal) {
-		pr_emerg("Fatal hardware error reported by firmware");
-		pr_emerg("Check RTAS error log for details");
-		pr_emerg("Immediate power off");
+		pr_emerg("Fatal hardware error detected. Check RTAS error"
+			 " log for details. Powering off immediately\n");
 		emergency_sync();
 		kernel_power_off();
 	} else {
-		pr_err("Recoverable hardware error reported by firmware");
+		pr_err("Recoverable hardware error detected\n");
 	}
 
 	spin_unlock(&ras_log_buf_lock);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 36df46eaba24..6e944fc6e5f9 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -515,7 +515,7 @@ static void __init pSeries_setup_arch(void)
 
 	fwnmi_init();
 
-	/* By default, only probe PCI (can be overriden by rtas_pci) */
+	/* By default, only probe PCI (can be overridden by rtas_pci) */
 	pci_add_flags(PCI_PROBE_ONLY);
 
 	/* Find and initialize PCI host bridges */
diff --git a/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh
new file mode 100755
index 000000000000..c658d8cf760b
--- /dev/null
+++ b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+
+set -e
+set -o pipefail
+
+# To debug, uncomment the following line
+# set -x
+
+# Test whether the compile option -mprofile-kernel exists and generates
+# profiling code (ie. a call to _mcount()).
+echo "int func() { return 0; }" | \
+    $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \
+    grep -q "_mcount"
+
+# Test whether the notrace attribute correctly suppresses calls to _mcount().
+
+echo -e "#include <linux/compiler.h>\nnotrace int func() { return 0; }" | \
+    $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \
+    grep -q "_mcount" && \
+    exit 1
+
+echo "OK"
+exit 0
diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig
index a19332a38715..52dc165c0efb 100644
--- a/arch/powerpc/sysdev/Kconfig
+++ b/arch/powerpc/sysdev/Kconfig
@@ -40,3 +40,8 @@ config SCOM_DEBUGFS
 config GE_FPGA
 	bool
 	default n
+
+config FSL_CORENET_RCPM
+	bool
+	help
+	  This option enables support for RCPM (Run Control/Power Management).
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 5b492a6438ff..a254824719f1 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -20,13 +20,13 @@ obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o fsl_mpic_err.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_PMC)		+= fsl_pmc.o
+obj-$(CONFIG_FSL_CORENET_RCPM)	+= fsl_rcpm.o
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_FSL_85XX_CACHE_SRAM)	+= fsl_85xx_l2ctlr.o fsl_85xx_cache_sram.o
 obj-$(CONFIG_SIMPLE_GPIO)	+= simple_gpio.o
 obj-$(CONFIG_FSL_RIO)		+= fsl_rio.o fsl_rmu.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
-obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o
 obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 				   mv64x60_udbg.o
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index d2b79bc336c1..0d112b94d91d 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -43,6 +43,7 @@
 #include <linux/types.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/pfn_t.h>
 
 #include <asm/page.h>
 #include <asm/prom.h>
@@ -103,7 +104,7 @@ axon_ram_irq_handler(int irq, void *dev)
  * axon_ram_make_request - make_request() method for block device
  * @queue, @bio: see blk_queue_make_request()
  */
-static void
+static blk_qc_t
 axon_ram_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct axon_ram_bank *bank = bio->bi_bdev->bd_disk->private_data;
@@ -120,7 +121,7 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio)
 	bio_for_each_segment(vec, bio, iter) {
 		if (unlikely(phys_mem + vec.bv_len > phys_end)) {
 			bio_io_error(bio);
-			return;
+			return BLK_QC_T_NONE;
 		}
 
 		user_mem = page_address(vec.bv_page) + vec.bv_offset;
@@ -133,6 +134,7 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio)
 		transfered += vec.bv_len;
 	}
 	bio_endio(bio);
+	return BLK_QC_T_NONE;
 }
 
 /**
@@ -141,15 +143,13 @@ axon_ram_make_request(struct request_queue *queue, struct bio *bio)
  */
 static long
 axon_ram_direct_access(struct block_device *device, sector_t sector,
-		       void __pmem **kaddr, unsigned long *pfn)
+		       void __pmem **kaddr, pfn_t *pfn)
 {
 	struct axon_ram_bank *bank = device->bd_disk->private_data;
 	loff_t offset = (loff_t)sector << AXON_RAM_SECTOR_SHIFT;
-	void *addr = (void *)(bank->ph_addr + offset);
-
-	*kaddr = (void __pmem *)addr;
-	*pfn = virt_to_phys(addr) >> PAGE_SHIFT;
 
+	*kaddr = (void __pmem __force *) bank->io_addr + offset;
+	*pfn = phys_to_pfn_t(bank->ph_addr + offset, PFN_DEV);
 	return bank->size - offset;
 }
 
@@ -312,6 +312,7 @@ static const struct of_device_id axon_ram_device_id[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(of, axon_ram_device_id);
 
 static struct platform_driver axon_ram_driver = {
 	.probe		= axon_ram_probe,
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 5e6ff38ea69f..8ed65365be50 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -228,7 +228,10 @@ void __init cpm_reset(void)
 	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
 	 */
 	siu_conf = immr_map(im_siu_conf);
-	out_be32(&siu_conf->sc_sdcr, 1);
+	if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
+		out_be32(&siu_conf->sc_sdcr, 0x40);
+	else
+		out_be32(&siu_conf->sc_sdcr, 1);
 	immr_unmap(siu_conf);
 
 	cpm_muram_init();
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index e00a5ee58fd7..9d32465eddb1 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -27,8 +27,8 @@
 
 #include <asm/udbg.h>
 #include <asm/io.h>
-#include <asm/rheap.h>
 #include <asm/cpm.h>
+#include <soc/fsl/qe/qe.h>
 
 #include <mm/mmu_decl.h>
 
@@ -65,162 +65,6 @@ void __init udbg_init_cpm(void)
 }
 #endif
 
-static spinlock_t cpm_muram_lock;
-static rh_block_t cpm_boot_muram_rh_block[16];
-static rh_info_t cpm_muram_info;
-static u8 __iomem *muram_vbase;
-static phys_addr_t muram_pbase;
-
-/* Max address size we deal with */
-#define OF_MAX_ADDR_CELLS	4
-
-int cpm_muram_init(void)
-{
-	struct device_node *np;
-	struct resource r;
-	u32 zero[OF_MAX_ADDR_CELLS] = {};
-	resource_size_t max = 0;
-	int i = 0;
-	int ret = 0;
-
-	if (muram_pbase)
-		return 0;
-
-	spin_lock_init(&cpm_muram_lock);
-	/* initialize the info header */
-	rh_init(&cpm_muram_info, 1,
-	        sizeof(cpm_boot_muram_rh_block) /
-	        sizeof(cpm_boot_muram_rh_block[0]),
-	        cpm_boot_muram_rh_block);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
-	if (!np) {
-		/* try legacy bindings */
-		np = of_find_node_by_name(NULL, "data-only");
-		if (!np) {
-			printk(KERN_ERR "Cannot find CPM muram data node");
-			ret = -ENODEV;
-			goto out;
-		}
-	}
-
-	muram_pbase = of_translate_address(np, zero);
-	if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) {
-		printk(KERN_ERR "Cannot translate zero through CPM muram node");
-		ret = -ENODEV;
-		goto out;
-	}
-
-	while (of_address_to_resource(np, i++, &r) == 0) {
-		if (r.end > max)
-			max = r.end;
-
-		rh_attach_region(&cpm_muram_info, r.start - muram_pbase,
-				 resource_size(&r));
-	}
-
-	muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1);
-	if (!muram_vbase) {
-		printk(KERN_ERR "Cannot map CPM muram");
-		ret = -ENOMEM;
-	}
-
-out:
-	of_node_put(np);
-	return ret;
-}
-
-/**
- * cpm_muram_alloc - allocate the requested size worth of multi-user ram
- * @size: number of bytes to allocate
- * @align: requested alignment, in bytes
- *
- * This function returns an offset into the muram area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	cpm_muram_info.alignment = align;
-	start = rh_alloc(&cpm_muram_info, size, "commproc");
-	if (!IS_ERR_VALUE(start))
-		memset_io(cpm_muram_addr(start), 0, size);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc);
-
-/**
- * cpm_muram_free - free a chunk of multi-user ram
- * @offset: The beginning of the chunk as returned by cpm_muram_alloc().
- */
-int cpm_muram_free(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	ret = rh_free(&cpm_muram_info, offset);
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_muram_free);
-
-/**
- * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
- * @offset: the offset into the muram area to reserve
- * @size: the number of bytes to reserve
- *
- * This function returns "start" on success, -ENOMEM on failure.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- * Use cpm_muram_free() to free the allocation.
- */
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_muram_lock, flags);
-	cpm_muram_info.alignment = 1;
-	start = rh_alloc_fixed(&cpm_muram_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_muram_alloc_fixed);
-
-/**
- * cpm_muram_addr - turn a muram offset into a virtual address
- * @offset: muram offset to convert
- */
-void __iomem *cpm_muram_addr(unsigned long offset)
-{
-	return muram_vbase + offset;
-}
-EXPORT_SYMBOL(cpm_muram_addr);
-
-unsigned long cpm_muram_offset(void __iomem *addr)
-{
-	return addr - (void __iomem *)muram_vbase;
-}
-EXPORT_SYMBOL(cpm_muram_offset);
-
-/**
- * cpm_muram_dma - turn a muram virtual address into a DMA address
- * @offset: virtual address from cpm_muram_addr() to convert
- */
-dma_addr_t cpm_muram_dma(void __iomem *addr)
-{
-	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
-}
-EXPORT_SYMBOL(cpm_muram_dma);
-
 #if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
 
 struct cpm2_ioports {
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
index 38138cf8d33e..424b67fdb57f 100644
--- a/arch/powerpc/sysdev/fsl_lbc.c
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -27,6 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/mod_devicetable.h>
+#include <linux/syscore_ops.h>
 #include <asm/prom.h>
 #include <asm/fsl_lbc.h>
 
@@ -243,8 +244,6 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
 	if (status & LTESR_CS)
 		dev_err(ctrl->dev, "Chip select error: "
 			"LTESR 0x%08X\n", status);
-	if (status & LTESR_UPM)
-		;
 	if (status & LTESR_FCT) {
 		dev_err(ctrl->dev, "FCM command time-out: "
 			"LTESR 0x%08X\n", status);
@@ -354,24 +353,42 @@ err:
 #ifdef CONFIG_SUSPEND
 
 /* save lbc registers */
-static int fsl_lbc_suspend(struct platform_device *pdev, pm_message_t state)
+static int fsl_lbc_syscore_suspend(void)
 {
-	struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_ctrl *ctrl;
+	struct fsl_lbc_regs __iomem *lbc;
+
+	ctrl = fsl_lbc_ctrl_dev;
+	if (!ctrl)
+		goto out;
+
+	lbc = ctrl->regs;
+	if (!lbc)
+		goto out;
 
 	ctrl->saved_regs = kmalloc(sizeof(struct fsl_lbc_regs), GFP_KERNEL);
 	if (!ctrl->saved_regs)
 		return -ENOMEM;
 
 	_memcpy_fromio(ctrl->saved_regs, lbc, sizeof(struct fsl_lbc_regs));
+
+out:
 	return 0;
 }
 
 /* restore lbc registers */
-static int fsl_lbc_resume(struct platform_device *pdev)
+static void fsl_lbc_syscore_resume(void)
 {
-	struct fsl_lbc_ctrl *ctrl = dev_get_drvdata(&pdev->dev);
-	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+	struct fsl_lbc_ctrl *ctrl;
+	struct fsl_lbc_regs __iomem *lbc;
+
+	ctrl = fsl_lbc_ctrl_dev;
+	if (!ctrl)
+		goto out;
+
+	lbc = ctrl->regs;
+	if (!lbc)
+		goto out;
 
 	if (ctrl->saved_regs) {
 		_memcpy_toio(lbc, ctrl->saved_regs,
@@ -379,7 +396,9 @@ static int fsl_lbc_resume(struct platform_device *pdev)
 		kfree(ctrl->saved_regs);
 		ctrl->saved_regs = NULL;
 	}
-	return 0;
+
+out:
+	return;
 }
 #endif /* CONFIG_SUSPEND */
 
@@ -391,20 +410,26 @@ static const struct of_device_id fsl_lbc_match[] = {
 	{},
 };
 
+#ifdef CONFIG_SUSPEND
+static struct syscore_ops lbc_syscore_pm_ops = {
+	.suspend = fsl_lbc_syscore_suspend,
+	.resume = fsl_lbc_syscore_resume,
+};
+#endif
+
 static struct platform_driver fsl_lbc_ctrl_driver = {
 	.driver = {
 		.name = "fsl-lbc",
 		.of_match_table = fsl_lbc_match,
 	},
 	.probe = fsl_lbc_ctrl_probe,
-#ifdef CONFIG_SUSPEND
-	.suspend     = fsl_lbc_suspend,
-	.resume      = fsl_lbc_resume,
-#endif
 };
 
 static int __init fsl_lbc_init(void)
 {
+#ifdef CONFIG_SUSPEND
+	register_syscore_ops(&lbc_syscore_pm_ops);
+#endif
 	return platform_driver_register(&fsl_lbc_ctrl_driver);
 }
 subsys_initcall(fsl_lbc_init);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 610f472f91d1..85729f49764f 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -21,10 +21,12 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/string.h>
+#include <linux/fsl/edac.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/memblock.h>
 #include <linux/log2.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
@@ -216,6 +218,19 @@ static void setup_pci_atmu(struct pci_controller *hose)
 	 */
 	setup_inbound = !is_kdump();
 
+	if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) {
+		/*
+		 * BSC9132 Rev1.0 has an issue where all the PEX inbound
+		 * windows have implemented the default target value as 0xf
+		 * for CCSR space.In all Freescale legacy devices the target
+		 * of 0xf is reserved for local memory space. 9132 Rev1.0
+		 * now has local mempry space mapped to target 0x0 instead of
+		 * 0xf. Hence adding a workaround to remove the target 0xf
+		 * defined for memory space from Inbound window attributes.
+		 */
+		piwar &= ~PIWAR_TGI_LOCAL;
+	}
+
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
 			win_idx = 2;
@@ -560,7 +575,7 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary)
 	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
 		/* use fsl_indirect_read_config for PCIe */
 		hose->ops = &fsl_indirect_pcie_ops;
-		/* For PCIE read HEADER_TYPE to identify controler mode */
+		/* For PCIE read HEADER_TYPE to identify controller mode */
 		early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
 		if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
 			goto no_bridge;
@@ -1255,6 +1270,25 @@ void fsl_pcibios_fixup_phb(struct pci_controller *phb)
 #endif
 }
 
+static int add_err_dev(struct platform_device *pdev)
+{
+	struct platform_device *errdev;
+	struct mpc85xx_edac_pci_plat_data pd = {
+		.of_node = pdev->dev.of_node
+	};
+
+	errdev = platform_device_register_resndata(&pdev->dev,
+						   "mpc85xx-pci-edac",
+						   PLATFORM_DEVID_AUTO,
+						   pdev->resource,
+						   pdev->num_resources,
+						   &pd, sizeof(pd));
+	if (IS_ERR(errdev))
+		return PTR_ERR(errdev);
+
+	return 0;
+}
+
 static int fsl_pci_probe(struct platform_device *pdev)
 {
 	struct device_node *node;
@@ -1262,8 +1296,13 @@ static int fsl_pci_probe(struct platform_device *pdev)
 
 	node = pdev->dev.of_node;
 	ret = fsl_add_bridge(pdev, fsl_pci_primary == node);
+	if (ret)
+		return ret;
 
-	mpc85xx_pci_err_probe(pdev);
+	ret = add_err_dev(pdev);
+	if (ret)
+		dev_err(&pdev->dev, "couldn't register error device: %d\n",
+			ret);
 
 	return 0;
 }
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index c1cec771d5ea..151588530b06 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -130,15 +130,6 @@ void fsl_pci_assign_primary(void);
 static inline void fsl_pci_assign_primary(void) {}
 #endif
 
-#ifdef CONFIG_EDAC_MPC85XX
-int mpc85xx_pci_err_probe(struct platform_device *op);
-#else
-static inline int mpc85xx_pci_err_probe(struct platform_device *op)
-{
-	return -ENOTSUPP;
-}
-#endif
-
 #ifdef CONFIG_FSL_PCI
 extern int fsl_pci_mcheck_exception(struct pt_regs *);
 #else
diff --git a/arch/powerpc/sysdev/fsl_rcpm.c b/arch/powerpc/sysdev/fsl_rcpm.c
new file mode 100644
index 000000000000..9259a94f70e1
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_rcpm.c
@@ -0,0 +1,386 @@
+/*
+ * RCPM(Run Control/Power Management) support
+ *
+ * Copyright 2012-2015 Freescale Semiconductor Inc.
+ *
+ * Author: Chenhui Zhao <chenhui.zhao@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/of_address.h>
+#include <linux/export.h>
+
+#include <asm/io.h>
+#include <linux/fsl/guts.h>
+#include <asm/cputhreads.h>
+#include <asm/fsl_pm.h>
+#include <asm/smp.h>
+
+static struct ccsr_rcpm_v1 __iomem *rcpm_v1_regs;
+static struct ccsr_rcpm_v2 __iomem *rcpm_v2_regs;
+static unsigned int fsl_supported_pm_modes;
+
+static void rcpm_v1_irq_mask(int cpu)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	unsigned int mask = 1 << hw_cpu;
+
+	setbits32(&rcpm_v1_regs->cpmimr, mask);
+	setbits32(&rcpm_v1_regs->cpmcimr, mask);
+	setbits32(&rcpm_v1_regs->cpmmcmr, mask);
+	setbits32(&rcpm_v1_regs->cpmnmimr, mask);
+}
+
+static void rcpm_v2_irq_mask(int cpu)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	unsigned int mask = 1 << hw_cpu;
+
+	setbits32(&rcpm_v2_regs->tpmimr0, mask);
+	setbits32(&rcpm_v2_regs->tpmcimr0, mask);
+	setbits32(&rcpm_v2_regs->tpmmcmr0, mask);
+	setbits32(&rcpm_v2_regs->tpmnmimr0, mask);
+}
+
+static void rcpm_v1_irq_unmask(int cpu)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	unsigned int mask = 1 << hw_cpu;
+
+	clrbits32(&rcpm_v1_regs->cpmimr, mask);
+	clrbits32(&rcpm_v1_regs->cpmcimr, mask);
+	clrbits32(&rcpm_v1_regs->cpmmcmr, mask);
+	clrbits32(&rcpm_v1_regs->cpmnmimr, mask);
+}
+
+static void rcpm_v2_irq_unmask(int cpu)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	unsigned int mask = 1 << hw_cpu;
+
+	clrbits32(&rcpm_v2_regs->tpmimr0, mask);
+	clrbits32(&rcpm_v2_regs->tpmcimr0, mask);
+	clrbits32(&rcpm_v2_regs->tpmmcmr0, mask);
+	clrbits32(&rcpm_v2_regs->tpmnmimr0, mask);
+}
+
+static void rcpm_v1_set_ip_power(bool enable, u32 mask)
+{
+	if (enable)
+		setbits32(&rcpm_v1_regs->ippdexpcr, mask);
+	else
+		clrbits32(&rcpm_v1_regs->ippdexpcr, mask);
+}
+
+static void rcpm_v2_set_ip_power(bool enable, u32 mask)
+{
+	if (enable)
+		setbits32(&rcpm_v2_regs->ippdexpcr[0], mask);
+	else
+		clrbits32(&rcpm_v2_regs->ippdexpcr[0], mask);
+}
+
+static void rcpm_v1_cpu_enter_state(int cpu, int state)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	unsigned int mask = 1 << hw_cpu;
+
+	switch (state) {
+	case E500_PM_PH10:
+		setbits32(&rcpm_v1_regs->cdozcr, mask);
+		break;
+	case E500_PM_PH15:
+		setbits32(&rcpm_v1_regs->cnapcr, mask);
+		break;
+	default:
+		pr_warn("Unknown cpu PM state (%d)\n", state);
+		break;
+	}
+}
+
+static void rcpm_v2_cpu_enter_state(int cpu, int state)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	u32 mask = 1 << cpu_core_index_of_thread(cpu);
+
+	switch (state) {
+	case E500_PM_PH10:
+		/* one bit corresponds to one thread for PH10 of 6500 */
+		setbits32(&rcpm_v2_regs->tph10setr0, 1 << hw_cpu);
+		break;
+	case E500_PM_PH15:
+		setbits32(&rcpm_v2_regs->pcph15setr, mask);
+		break;
+	case E500_PM_PH20:
+		setbits32(&rcpm_v2_regs->pcph20setr, mask);
+		break;
+	case E500_PM_PH30:
+		setbits32(&rcpm_v2_regs->pcph30setr, mask);
+		break;
+	default:
+		pr_warn("Unknown cpu PM state (%d)\n", state);
+	}
+}
+
+static void rcpm_v1_cpu_die(int cpu)
+{
+	rcpm_v1_cpu_enter_state(cpu, E500_PM_PH15);
+}
+
+#ifdef CONFIG_PPC64
+static void qoriq_disable_thread(int cpu)
+{
+	int thread = cpu_thread_in_core(cpu);
+
+	book3e_stop_thread(thread);
+}
+#endif
+
+static void rcpm_v2_cpu_die(int cpu)
+{
+#ifdef CONFIG_PPC64
+	int primary;
+
+	if (threads_per_core == 2) {
+		primary = cpu_first_thread_sibling(cpu);
+		if (cpu_is_offline(primary) && cpu_is_offline(primary + 1)) {
+			/* if both threads are offline, put the cpu in PH20 */
+			rcpm_v2_cpu_enter_state(cpu, E500_PM_PH20);
+		} else {
+			/* if only one thread is offline, disable the thread */
+			qoriq_disable_thread(cpu);
+		}
+	}
+#endif
+
+	if (threads_per_core == 1)
+		rcpm_v2_cpu_enter_state(cpu, E500_PM_PH20);
+}
+
+static void rcpm_v1_cpu_exit_state(int cpu, int state)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	unsigned int mask = 1 << hw_cpu;
+
+	switch (state) {
+	case E500_PM_PH10:
+		clrbits32(&rcpm_v1_regs->cdozcr, mask);
+		break;
+	case E500_PM_PH15:
+		clrbits32(&rcpm_v1_regs->cnapcr, mask);
+		break;
+	default:
+		pr_warn("Unknown cpu PM state (%d)\n", state);
+		break;
+	}
+}
+
+static void rcpm_v1_cpu_up_prepare(int cpu)
+{
+	rcpm_v1_cpu_exit_state(cpu, E500_PM_PH15);
+	rcpm_v1_irq_unmask(cpu);
+}
+
+static void rcpm_v2_cpu_exit_state(int cpu, int state)
+{
+	int hw_cpu = get_hard_smp_processor_id(cpu);
+	u32 mask = 1 << cpu_core_index_of_thread(cpu);
+
+	switch (state) {
+	case E500_PM_PH10:
+		setbits32(&rcpm_v2_regs->tph10clrr0, 1 << hw_cpu);
+		break;
+	case E500_PM_PH15:
+		setbits32(&rcpm_v2_regs->pcph15clrr, mask);
+		break;
+	case E500_PM_PH20:
+		setbits32(&rcpm_v2_regs->pcph20clrr, mask);
+		break;
+	case E500_PM_PH30:
+		setbits32(&rcpm_v2_regs->pcph30clrr, mask);
+		break;
+	default:
+		pr_warn("Unknown cpu PM state (%d)\n", state);
+	}
+}
+
+static void rcpm_v2_cpu_up_prepare(int cpu)
+{
+	rcpm_v2_cpu_exit_state(cpu, E500_PM_PH20);
+	rcpm_v2_irq_unmask(cpu);
+}
+
+static int rcpm_v1_plat_enter_state(int state)
+{
+	u32 *pmcsr_reg = &rcpm_v1_regs->powmgtcsr;
+	int ret = 0;
+	int result;
+
+	switch (state) {
+	case PLAT_PM_SLEEP:
+		setbits32(pmcsr_reg, RCPM_POWMGTCSR_SLP);
+
+		/* Upon resume, wait for RCPM_POWMGTCSR_SLP bit to be clear. */
+		result = spin_event_timeout(
+		  !(in_be32(pmcsr_reg) & RCPM_POWMGTCSR_SLP), 10000, 10);
+		if (!result) {
+			pr_err("timeout waiting for SLP bit to be cleared\n");
+			ret = -ETIMEDOUT;
+		}
+		break;
+	default:
+		pr_warn("Unknown platform PM state (%d)", state);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int rcpm_v2_plat_enter_state(int state)
+{
+	u32 *pmcsr_reg = &rcpm_v2_regs->powmgtcsr;
+	int ret = 0;
+	int result;
+
+	switch (state) {
+	case PLAT_PM_LPM20:
+		/* clear previous LPM20 status */
+		setbits32(pmcsr_reg, RCPM_POWMGTCSR_P_LPM20_ST);
+		/* enter LPM20 status */
+		setbits32(pmcsr_reg, RCPM_POWMGTCSR_LPM20_RQ);
+
+		/* At this point, the device is in LPM20 status. */
+
+		/* resume ... */
+		result = spin_event_timeout(
+		  !(in_be32(pmcsr_reg) & RCPM_POWMGTCSR_LPM20_ST), 10000, 10);
+		if (!result) {
+			pr_err("timeout waiting for LPM20 bit to be cleared\n");
+			ret = -ETIMEDOUT;
+		}
+		break;
+	default:
+		pr_warn("Unknown platform PM state (%d)\n", state);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static int rcpm_v1_plat_enter_sleep(void)
+{
+	return rcpm_v1_plat_enter_state(PLAT_PM_SLEEP);
+}
+
+static int rcpm_v2_plat_enter_sleep(void)
+{
+	return rcpm_v2_plat_enter_state(PLAT_PM_LPM20);
+}
+
+static void rcpm_common_freeze_time_base(u32 *tben_reg, int freeze)
+{
+	static u32 mask;
+
+	if (freeze) {
+		mask = in_be32(tben_reg);
+		clrbits32(tben_reg, mask);
+	} else {
+		setbits32(tben_reg, mask);
+	}
+
+	/* read back to push the previous write */
+	in_be32(tben_reg);
+}
+
+static void rcpm_v1_freeze_time_base(bool freeze)
+{
+	rcpm_common_freeze_time_base(&rcpm_v1_regs->ctbenr, freeze);
+}
+
+static void rcpm_v2_freeze_time_base(bool freeze)
+{
+	rcpm_common_freeze_time_base(&rcpm_v2_regs->pctbenr, freeze);
+}
+
+static unsigned int rcpm_get_pm_modes(void)
+{
+	return fsl_supported_pm_modes;
+}
+
+static const struct fsl_pm_ops qoriq_rcpm_v1_ops = {
+	.irq_mask = rcpm_v1_irq_mask,
+	.irq_unmask = rcpm_v1_irq_unmask,
+	.cpu_enter_state = rcpm_v1_cpu_enter_state,
+	.cpu_exit_state = rcpm_v1_cpu_exit_state,
+	.cpu_up_prepare = rcpm_v1_cpu_up_prepare,
+	.cpu_die = rcpm_v1_cpu_die,
+	.plat_enter_sleep = rcpm_v1_plat_enter_sleep,
+	.set_ip_power = rcpm_v1_set_ip_power,
+	.freeze_time_base = rcpm_v1_freeze_time_base,
+	.get_pm_modes = rcpm_get_pm_modes,
+};
+
+static const struct fsl_pm_ops qoriq_rcpm_v2_ops = {
+	.irq_mask = rcpm_v2_irq_mask,
+	.irq_unmask = rcpm_v2_irq_unmask,
+	.cpu_enter_state = rcpm_v2_cpu_enter_state,
+	.cpu_exit_state = rcpm_v2_cpu_exit_state,
+	.cpu_up_prepare = rcpm_v2_cpu_up_prepare,
+	.cpu_die = rcpm_v2_cpu_die,
+	.plat_enter_sleep = rcpm_v2_plat_enter_sleep,
+	.set_ip_power = rcpm_v2_set_ip_power,
+	.freeze_time_base = rcpm_v2_freeze_time_base,
+	.get_pm_modes = rcpm_get_pm_modes,
+};
+
+static const struct of_device_id rcpm_matches[] = {
+	{
+		.compatible = "fsl,qoriq-rcpm-1.0",
+		.data = &qoriq_rcpm_v1_ops,
+	},
+	{
+		.compatible = "fsl,qoriq-rcpm-2.0",
+		.data = &qoriq_rcpm_v2_ops,
+	},
+	{
+		.compatible = "fsl,qoriq-rcpm-2.1",
+		.data = &qoriq_rcpm_v2_ops,
+	},
+	{},
+};
+
+int __init fsl_rcpm_init(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	void __iomem *base;
+
+	np = of_find_matching_node_and_match(NULL, rcpm_matches, &match);
+	if (!np)
+		return 0;
+
+	base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!base) {
+		pr_err("of_iomap() error.\n");
+		return -ENOMEM;
+	}
+
+	rcpm_v1_regs = base;
+	rcpm_v2_regs = base;
+
+	/* support sleep by default */
+	fsl_supported_pm_modes = FSL_PM_SLEEP;
+
+	qoriq_pm_ops = match->data;
+
+	return 0;
+}
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index c1cd3698f534..f5bf38b94595 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -606,6 +606,12 @@ int fsl_rio_setup(struct platform_device *dev)
 		if (!port)
 			continue;
 
+		rc = rio_mport_initialize(port);
+		if (rc) {
+			kfree(port);
+			continue;
+		}
+
 		i = *port_index - 1;
 		port->index = (unsigned char)i;
 
@@ -682,12 +688,6 @@ int fsl_rio_setup(struct platform_device *dev)
 		dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
 				port->sys_size ? 65536 : 256);
 
-		if (rio_register_mport(port)) {
-			release_resource(&port->iores);
-			kfree(priv);
-			kfree(port);
-			continue;
-		}
 		if (port->host_deviceid >= 0)
 			out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST |
 				RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED);
@@ -726,7 +726,14 @@ int fsl_rio_setup(struct platform_device *dev)
 		fsl_rio_inbound_mem_init(priv);
 
 		dbell->mport[i] = port;
+		pw->mport[i] = port;
 
+		if (rio_register_mport(port)) {
+			release_resource(&port->iores);
+			kfree(priv);
+			kfree(port);
+			continue;
+		}
 		active_ports++;
 	}
 
diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h
index d53407a34f32..12dd18fd4795 100644
--- a/arch/powerpc/sysdev/fsl_rio.h
+++ b/arch/powerpc/sysdev/fsl_rio.h
@@ -97,6 +97,7 @@ struct fsl_rio_dbell {
 };
 
 struct fsl_rio_pw {
+	struct rio_mport *mport[MAX_PORT_NUM];
 	struct device *dev;
 	struct rio_pw_regs __iomem *pw_regs;
 	struct rio_port_write_msg port_write_msg;
diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c
index b48197ae44d0..c1826de4e749 100644
--- a/arch/powerpc/sysdev/fsl_rmu.c
+++ b/arch/powerpc/sysdev/fsl_rmu.c
@@ -481,14 +481,14 @@ pw_done:
 static void fsl_pw_dpc(struct work_struct *work)
 {
 	struct fsl_rio_pw *pw = container_of(work, struct fsl_rio_pw, pw_work);
-	u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)];
+	union rio_pw_msg msg_buffer;
+	int i;
 
 	/*
 	 * Process port-write messages
 	 */
-	while (kfifo_out_spinlocked(&pw->pw_fifo, (unsigned char *)msg_buffer,
+	while (kfifo_out_spinlocked(&pw->pw_fifo, (unsigned char *)&msg_buffer,
 			 RIO_PW_MSG_SIZE, &pw->pw_fifo_lock)) {
-		/* Process one message */
 #ifdef DEBUG_PW
 		{
 		u32 i;
@@ -496,15 +496,19 @@ static void fsl_pw_dpc(struct work_struct *work)
 		for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) {
 			if ((i%4) == 0)
 				pr_debug("\n0x%02x: 0x%08x", i*4,
-					 msg_buffer[i]);
+					 msg_buffer.raw[i]);
 			else
-				pr_debug(" 0x%08x", msg_buffer[i]);
+				pr_debug(" 0x%08x", msg_buffer.raw[i]);
 		}
 		pr_debug("\n");
 		}
 #endif
 		/* Pass the port-write message to RIO core for processing */
-		rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer);
+		for (i = 0; i < MAX_PORT_NUM; i++) {
+			if (pw->mport[i])
+				rio_inb_pwrite_handler(pw->mport[i],
+						       &msg_buffer);
+		}
 	}
 }
 
@@ -570,7 +574,7 @@ int fsl_rio_port_write_init(struct fsl_rio_pw *pw)
 	out_be32(&pw->pw_regs->pwsr,
 		 (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD));
 
-	/* Configure port write contoller for snooping enable all reporting,
+	/* Configure port write controller for snooping enable all reporting,
 	   clear queue full */
 	out_be32(&pw->pw_regs->pwmr,
 		 RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ);
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 6f99ed3967fd..aa2c186d3115 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -238,7 +238,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	/* init master interrupt controller */
 	outb(0x11, 0x20); /* Start init sequence */
 	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
+	outb(0x04, 0x21); /* edge triggered, Cascade (slave) on IRQ2 */
 	outb(0x01, 0x21); /* Select 8086 mode */
 
 	/* init slave interrupt controller */
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 2a0452e364ba..afe3c7cd395d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -2,7 +2,7 @@
  *  arch/powerpc/kernel/mpic.c
  *
  *  Driver for interrupt controllers following the OpenPIC standard, the
- *  common implementation beeing IBM's MPIC. This driver also can deal
+ *  common implementation being IBM's MPIC. This driver also can deal
  *  with various broken implementations of this HW.
  *
  *  Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
@@ -1657,7 +1657,7 @@ void __init mpic_init(struct mpic *mpic)
 		}
 	}
 
-	/* FSL mpic error interrupt intialization */
+	/* FSL mpic error interrupt initialization */
 	if (mpic->flags & MPIC_FSL_HAS_EIMR)
 		mpic_err_int_init(mpic, MPIC_FSL_ERR_INT);
 }
diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c
index fc65ad1b3293..d7a7ef135b9f 100644
--- a/arch/powerpc/sysdev/ppc4xx_gpio.c
+++ b/arch/powerpc/sysdev/ppc4xx_gpio.c
@@ -78,7 +78,7 @@ static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
 
-	return in_be32(&regs->ir) & GPIO_MASK(gpio);
+	return !!(in_be32(&regs->ir) & GPIO_MASK(gpio));
 }
 
 static inline void
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
deleted file mode 100644
index 3c251993bacd..000000000000
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# QE Communication options
-#
-
-config UCC_SLOW
-	bool
-	default y if SERIAL_QE
-	help
-	  This option provides qe_lib support to UCC slow
-	  protocols: UART, BISYNC, QMC
-
-config UCC_FAST
-	bool
-	default y if UCC_GETH
-	help
-	  This option provides qe_lib support to UCC fast
-	  protocols: HDLC, Ethernet, ATM, transparent
-
-config UCC
-	bool
-	default y if UCC_FAST || UCC_SLOW
-
-config QE_USB
-	bool
-	default y if USB_FSL_QE
-	help
-	  QE USB Controller support
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
deleted file mode 100644
index f1855c185291..000000000000
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of QE
-#
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
-
-obj-$(CONFIG_UCC)	+= ucc.o
-obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
-obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
-obj-$(CONFIG_QE_USB)	+= usb.o
-obj-$(CONFIG_QE_GPIO)	+= gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
deleted file mode 100644
index 521e67a49dc4..000000000000
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * QUICC Engine GPIOs
- *
- * Copyright (c) MontaVista Software, Inc. 2008.
- *
- * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <asm/qe.h>
-
-struct qe_gpio_chip {
-	struct of_mm_gpio_chip mm_gc;
-	spinlock_t lock;
-
-	unsigned long pin_flags[QE_PIO_PINS];
-#define QE_PIN_REQUESTED 0
-
-	/* shadowed data register to clear/set bits safely */
-	u32 cpdata;
-
-	/* saved_regs used to restore dedicated functions */
-	struct qe_pio_regs saved_regs;
-};
-
-static inline struct qe_gpio_chip *
-to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
-{
-	return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
-}
-
-static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
-{
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-
-	qe_gc->cpdata = in_be32(&regs->cpdata);
-	qe_gc->saved_regs.cpdata = qe_gc->cpdata;
-	qe_gc->saved_regs.cpdir1 = in_be32(&regs->cpdir1);
-	qe_gc->saved_regs.cpdir2 = in_be32(&regs->cpdir2);
-	qe_gc->saved_regs.cppar1 = in_be32(&regs->cppar1);
-	qe_gc->saved_regs.cppar2 = in_be32(&regs->cppar2);
-	qe_gc->saved_regs.cpodr = in_be32(&regs->cpodr);
-}
-
-static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
-	return in_be32(&regs->cpdata) & pin_mask;
-}
-
-static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	struct qe_pio_regs __iomem *regs = mm_gc->regs;
-	unsigned long flags;
-	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	if (val)
-		qe_gc->cpdata |= pin_mask;
-	else
-		qe_gc->cpdata &= ~pin_mask;
-
-	out_be32(&regs->cpdata, qe_gc->cpdata);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-
-static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	return 0;
-}
-
-static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
-{
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
-	unsigned long flags;
-
-	qe_gpio_set(gc, gpio, val);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	return 0;
-}
-
-struct qe_pin {
-	/*
-	 * The qe_gpio_chip name is unfortunate, we should change that to
-	 * something like qe_pio_controller. Someday.
-	 */
-	struct qe_gpio_chip *controller;
-	int num;
-};
-
-/**
- * qe_pin_request - Request a QE pin
- * @np:		device node to get a pin from
- * @index:	index of a pin in the device tree
- * Context:	non-atomic
- *
- * This function return qe_pin so that you could use it with the rest of
- * the QE Pin Multiplexing API.
- */
-struct qe_pin *qe_pin_request(struct device_node *np, int index)
-{
-	struct qe_pin *qe_pin;
-	struct gpio_chip *gc;
-	struct of_mm_gpio_chip *mm_gc;
-	struct qe_gpio_chip *qe_gc;
-	int err;
-	unsigned long flags;
-
-	qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL);
-	if (!qe_pin) {
-		pr_debug("%s: can't allocate memory\n", __func__);
-		return ERR_PTR(-ENOMEM);
-	}
-
-	err = of_get_gpio(np, index);
-	if (err < 0)
-		goto err0;
-	gc = gpio_to_chip(err);
-	if (WARN_ON(!gc))
-		goto err0;
-
-	if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) {
-		pr_debug("%s: tried to get a non-qe pin\n", __func__);
-		err = -EINVAL;
-		goto err0;
-	}
-
-	mm_gc = to_of_mm_gpio_chip(gc);
-	qe_gc = to_qe_gpio_chip(mm_gc);
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	err -= gc->base;
-	if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) {
-		qe_pin->controller = qe_gc;
-		qe_pin->num = err;
-		err = 0;
-	} else {
-		err = -EBUSY;
-	}
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	if (!err)
-		return qe_pin;
-err0:
-	kfree(qe_pin);
-	pr_debug("%s failed with status %d\n", __func__, err);
-	return ERR_PTR(err);
-}
-EXPORT_SYMBOL(qe_pin_request);
-
-/**
- * qe_pin_free - Free a pin
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function frees the qe_pin structure and makes a pin available
- * for further qe_pin_request() calls.
- */
-void qe_pin_free(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	unsigned long flags;
-	const int pin = qe_pin->num;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-	test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]);
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-
-	kfree(qe_pin);
-}
-EXPORT_SYMBOL(qe_pin_free);
-
-/**
- * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function resets a pin to a dedicated peripheral function that
- * has been set up by the firmware.
- */
-void qe_pin_set_dedicated(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
-	struct qe_pio_regs *sregs = &qe_gc->saved_regs;
-	int pin = qe_pin->num;
-	u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1));
-	u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2);
-	bool second_reg = pin > (QE_PIO_PINS / 2) - 1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	if (second_reg) {
-		clrsetbits_be32(&regs->cpdir2, mask2, sregs->cpdir2 & mask2);
-		clrsetbits_be32(&regs->cppar2, mask2, sregs->cppar2 & mask2);
-	} else {
-		clrsetbits_be32(&regs->cpdir1, mask2, sregs->cpdir1 & mask2);
-		clrsetbits_be32(&regs->cppar1, mask2, sregs->cppar1 & mask2);
-	}
-
-	if (sregs->cpdata & mask1)
-		qe_gc->cpdata |= mask1;
-	else
-		qe_gc->cpdata &= ~mask1;
-
-	out_be32(&regs->cpdata, qe_gc->cpdata);
-	clrsetbits_be32(&regs->cpodr, mask1, sregs->cpodr & mask1);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_dedicated);
-
-/**
- * qe_pin_set_gpio - Set a pin to the GPIO mode
- * @qe_pin:	pointer to the qe_pin structure
- * Context:	any
- *
- * This function sets a pin to the GPIO mode.
- */
-void qe_pin_set_gpio(struct qe_pin *qe_pin)
-{
-	struct qe_gpio_chip *qe_gc = qe_pin->controller;
-	struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_gc->lock, flags);
-
-	/* Let's make it input by default, GPIO API is able to change that. */
-	__par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0);
-
-	spin_unlock_irqrestore(&qe_gc->lock, flags);
-}
-EXPORT_SYMBOL(qe_pin_set_gpio);
-
-static int __init qe_add_gpiochips(void)
-{
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
-		int ret;
-		struct qe_gpio_chip *qe_gc;
-		struct of_mm_gpio_chip *mm_gc;
-		struct gpio_chip *gc;
-
-		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
-		if (!qe_gc) {
-			ret = -ENOMEM;
-			goto err;
-		}
-
-		spin_lock_init(&qe_gc->lock);
-
-		mm_gc = &qe_gc->mm_gc;
-		gc = &mm_gc->gc;
-
-		mm_gc->save_regs = qe_gpio_save_regs;
-		gc->ngpio = QE_PIO_PINS;
-		gc->direction_input = qe_gpio_dir_in;
-		gc->direction_output = qe_gpio_dir_out;
-		gc->get = qe_gpio_get;
-		gc->set = qe_gpio_set;
-
-		ret = of_mm_gpiochip_add(np, mm_gc);
-		if (ret)
-			goto err;
-		continue;
-err:
-		pr_err("%s: registration failed with status %d\n",
-		       np->full_name, ret);
-		kfree(qe_gc);
-		/* try others anyway */
-	}
-	return 0;
-}
-arch_initcall(qe_add_gpiochips);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
deleted file mode 100644
index c2518cdb7ddb..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
- * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net)
- *
- * Description:
- * General Purpose functions for the global management of the
- * QUICC Engine (QE).
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/crc32.h>
-#include <linux/mod_devicetable.h>
-#include <linux/of_platform.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/prom.h>
-#include <asm/rheap.h>
-
-static void qe_snums_init(void);
-static int qe_sdma_init(void);
-
-static DEFINE_SPINLOCK(qe_lock);
-DEFINE_SPINLOCK(cmxgcr_lock);
-EXPORT_SYMBOL(cmxgcr_lock);
-
-/* QE snum state */
-enum qe_snum_state {
-	QE_SNUM_STATE_USED,
-	QE_SNUM_STATE_FREE
-};
-
-/* QE snum */
-struct qe_snum {
-	u8 num;
-	enum qe_snum_state state;
-};
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-struct qe_immap __iomem *qe_immr;
-EXPORT_SYMBOL(qe_immr);
-
-static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
-static unsigned int qe_num_of_snum;
-
-static phys_addr_t qebase = -1;
-
-phys_addr_t get_qe_base(void)
-{
-	struct device_node *qe;
-	int size;
-	const u32 *prop;
-
-	if (qebase != -1)
-		return qebase;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return qebase;
-	}
-
-	prop = of_get_property(qe, "reg", &size);
-	if (prop && size >= sizeof(*prop))
-		qebase = of_translate_address(qe, prop);
-	of_node_put(qe);
-
-	return qebase;
-}
-
-EXPORT_SYMBOL(get_qe_base);
-
-void qe_reset(void)
-{
-	if (qe_immr == NULL)
-		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
-
-	qe_snums_init();
-
-	qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID,
-		     QE_CR_PROTOCOL_UNSPECIFIED, 0);
-
-	/* Reclaim the MURAM memory for our use. */
-	qe_muram_init();
-
-	if (qe_sdma_init())
-		panic("sdma init failed!");
-}
-
-int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
-{
-	unsigned long flags;
-	u8 mcn_shift = 0, dev_shift = 0;
-	u32 ret;
-
-	spin_lock_irqsave(&qe_lock, flags);
-	if (cmd == QE_RESET) {
-		out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
-	} else {
-		if (cmd == QE_ASSIGN_PAGE) {
-			/* Here device is the SNUM, not sub-block */
-			dev_shift = QE_CR_SNUM_SHIFT;
-		} else if (cmd == QE_ASSIGN_RISC) {
-			/* Here device is the SNUM, and mcnProtocol is
-			 * e_QeCmdRiscAssignment value */
-			dev_shift = QE_CR_SNUM_SHIFT;
-			mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT;
-		} else {
-			if (device == QE_CR_SUBBLOCK_USB)
-				mcn_shift = QE_CR_MCN_USB_SHIFT;
-			else
-				mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
-		}
-
-		out_be32(&qe_immr->cp.cecdr, cmd_input);
-		out_be32(&qe_immr->cp.cecr,
-			 (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
-			  mcn_protocol << mcn_shift));
-	}
-
-	/* wait for the QE_CR_FLG to clear */
-	ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
-			   100, 0);
-	/* On timeout (e.g. failure), the expression will be false (ret == 0),
-	   otherwise it will be true (ret == 1). */
-	spin_unlock_irqrestore(&qe_lock, flags);
-
-	return ret == 1;
-}
-EXPORT_SYMBOL(qe_issue_cmd);
-
-/* Set a baud rate generator. This needs lots of work. There are
- * 16 BRGs, which can be connected to the QE channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The BRG clock is the QE clock divided by 2.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-static unsigned int brg_clk = 0;
-
-unsigned int qe_get_brg_clk(void)
-{
-	struct device_node *qe;
-	int size;
-	const u32 *prop;
-
-	if (brg_clk)
-		return brg_clk;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return brg_clk;
-	}
-
-	prop = of_get_property(qe, "brg-frequency", &size);
-	if (prop && size == sizeof(*prop))
-		brg_clk = *prop;
-
-	of_node_put(qe);
-
-	return brg_clk;
-}
-EXPORT_SYMBOL(qe_get_brg_clk);
-
-/* Program the BRG to the given sampling rate and multiplier
- *
- * @brg: the BRG, QE_BRG1 - QE_BRG16
- * @rate: the desired sampling rate
- * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
- * GUMR_L[TDCR].  E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
- * then 'multiplier' should be 8.
- */
-int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
-{
-	u32 divisor, tempval;
-	u32 div16 = 0;
-
-	if ((brg < QE_BRG1) || (brg > QE_BRG16))
-		return -EINVAL;
-
-	divisor = qe_get_brg_clk() / (rate * multiplier);
-
-	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
-		div16 = QE_BRGC_DIV16;
-		divisor /= 16;
-	}
-
-	/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
-	   that the BRG divisor must be even if you're not using divide-by-16
-	   mode. */
-	if (!div16 && (divisor & 1) && (divisor > 3))
-		divisor++;
-
-	tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
-		QE_BRGC_ENABLE | div16;
-
-	out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
-
-	return 0;
-}
-EXPORT_SYMBOL(qe_setbrg);
-
-/* Convert a string to a QE clock source enum
- *
- * This function takes a string, typically from a property in the device
- * tree, and returns the corresponding "enum qe_clock" value.
-*/
-enum qe_clock qe_clock_source(const char *source)
-{
-	unsigned int i;
-
-	if (strcasecmp(source, "none") == 0)
-		return QE_CLK_NONE;
-
-	if (strncasecmp(source, "brg", 3) == 0) {
-		i = simple_strtoul(source + 3, NULL, 10);
-		if ((i >= 1) && (i <= 16))
-			return (QE_BRG1 - 1) + i;
-		else
-			return QE_CLK_DUMMY;
-	}
-
-	if (strncasecmp(source, "clk", 3) == 0) {
-		i = simple_strtoul(source + 3, NULL, 10);
-		if ((i >= 1) && (i <= 24))
-			return (QE_CLK1 - 1) + i;
-		else
-			return QE_CLK_DUMMY;
-	}
-
-	return QE_CLK_DUMMY;
-}
-EXPORT_SYMBOL(qe_clock_source);
-
-/* Initialize SNUMs (thread serial numbers) according to
- * QE Module Control chapter, SNUM table
- */
-static void qe_snums_init(void)
-{
-	int i;
-	static const u8 snum_init_76[] = {
-		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
-		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
-		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
-		0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
-		0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
-		0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
-		0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
-		0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
-		0xF4, 0xF5, 0xFC, 0xFD,
-	};
-	static const u8 snum_init_46[] = {
-		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
-		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
-		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
-		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
-		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
-	};
-	static const u8 *snum_init;
-
-	qe_num_of_snum = qe_get_num_of_snums();
-
-	if (qe_num_of_snum == 76)
-		snum_init = snum_init_76;
-	else
-		snum_init = snum_init_46;
-
-	for (i = 0; i < qe_num_of_snum; i++) {
-		snums[i].num = snum_init[i];
-		snums[i].state = QE_SNUM_STATE_FREE;
-	}
-}
-
-int qe_get_snum(void)
-{
-	unsigned long flags;
-	int snum = -EBUSY;
-	int i;
-
-	spin_lock_irqsave(&qe_lock, flags);
-	for (i = 0; i < qe_num_of_snum; i++) {
-		if (snums[i].state == QE_SNUM_STATE_FREE) {
-			snums[i].state = QE_SNUM_STATE_USED;
-			snum = snums[i].num;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&qe_lock, flags);
-
-	return snum;
-}
-EXPORT_SYMBOL(qe_get_snum);
-
-void qe_put_snum(u8 snum)
-{
-	int i;
-
-	for (i = 0; i < qe_num_of_snum; i++) {
-		if (snums[i].num == snum) {
-			snums[i].state = QE_SNUM_STATE_FREE;
-			break;
-		}
-	}
-}
-EXPORT_SYMBOL(qe_put_snum);
-
-static int qe_sdma_init(void)
-{
-	struct sdma __iomem *sdma = &qe_immr->sdma;
-	static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
-
-	if (!sdma)
-		return -ENODEV;
-
-	/* allocate 2 internal temporary buffers (512 bytes size each) for
-	 * the SDMA */
-	if (IS_ERR_VALUE(sdma_buf_offset)) {
-		sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
-		if (IS_ERR_VALUE(sdma_buf_offset))
-			return -ENOMEM;
-	}
-
-	out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
- 	out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
- 					(0x1 << QE_SDMR_CEN_SHIFT)));
-
-	return 0;
-}
-
-/* The maximum number of RISCs we support */
-#define MAX_QE_RISC     4
-
-/* Firmware information stored here for qe_get_firmware_info() */
-static struct qe_firmware_info qe_firmware_info;
-
-/*
- * Set to 1 if QE firmware has been uploaded, and therefore
- * qe_firmware_info contains valid data.
- */
-static int qe_firmware_uploaded;
-
-/*
- * Upload a QE microcode
- *
- * This function is a worker function for qe_upload_firmware().  It does
- * the actual uploading of the microcode.
- */
-static void qe_upload_microcode(const void *base,
-	const struct qe_microcode *ucode)
-{
-	const __be32 *code = base + be32_to_cpu(ucode->code_offset);
-	unsigned int i;
-
-	if (ucode->major || ucode->minor || ucode->revision)
-		printk(KERN_INFO "qe-firmware: "
-			"uploading microcode '%s' version %u.%u.%u\n",
-			ucode->id, ucode->major, ucode->minor, ucode->revision);
-	else
-		printk(KERN_INFO "qe-firmware: "
-			"uploading microcode '%s'\n", ucode->id);
-
-	/* Use auto-increment */
-	out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
-		QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
-
-	for (i = 0; i < be32_to_cpu(ucode->count); i++)
-		out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
-	
-	/* Set I-RAM Ready Register */
-	out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
-}
-
-/*
- * Upload a microcode to the I-RAM at a specific address.
- *
- * See Documentation/powerpc/qe_firmware.txt for information on QE microcode
- * uploading.
- *
- * Currently, only version 1 is supported, so the 'version' field must be
- * set to 1.
- *
- * The SOC model and revision are not validated, they are only displayed for
- * informational purposes.
- *
- * 'calc_size' is the calculated size, in bytes, of the firmware structure and
- * all of the microcode structures, minus the CRC.
- *
- * 'length' is the size that the structure says it is, including the CRC.
- */
-int qe_upload_firmware(const struct qe_firmware *firmware)
-{
-	unsigned int i;
-	unsigned int j;
-	u32 crc;
-	size_t calc_size = sizeof(struct qe_firmware);
-	size_t length;
-	const struct qe_header *hdr;
-
-	if (!firmware) {
-		printk(KERN_ERR "qe-firmware: invalid pointer\n");
-		return -EINVAL;
-	}
-
-	hdr = &firmware->header;
-	length = be32_to_cpu(hdr->length);
-
-	/* Check the magic */
-	if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
-	    (hdr->magic[2] != 'F')) {
-		printk(KERN_ERR "qe-firmware: not a microcode\n");
-		return -EPERM;
-	}
-
-	/* Check the version */
-	if (hdr->version != 1) {
-		printk(KERN_ERR "qe-firmware: unsupported version\n");
-		return -EPERM;
-	}
-
-	/* Validate some of the fields */
-	if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
-		printk(KERN_ERR "qe-firmware: invalid data\n");
-		return -EINVAL;
-	}
-
-	/* Validate the length and check if there's a CRC */
-	calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
-
-	for (i = 0; i < firmware->count; i++)
-		/*
-		 * For situations where the second RISC uses the same microcode
-		 * as the first, the 'code_offset' and 'count' fields will be
-		 * zero, so it's okay to add those.
-		 */
-		calc_size += sizeof(__be32) *
-			be32_to_cpu(firmware->microcode[i].count);
-
-	/* Validate the length */
-	if (length != calc_size + sizeof(__be32)) {
-		printk(KERN_ERR "qe-firmware: invalid length\n");
-		return -EPERM;
-	}
-
-	/* Validate the CRC */
-	crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size));
-	if (crc != crc32(0, firmware, calc_size)) {
-		printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
-		return -EIO;
-	}
-
-	/*
-	 * If the microcode calls for it, split the I-RAM.
-	 */
-	if (!firmware->split)
-		setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
-
-	if (firmware->soc.model)
-		printk(KERN_INFO
-			"qe-firmware: firmware '%s' for %u V%u.%u\n",
-			firmware->id, be16_to_cpu(firmware->soc.model),
-			firmware->soc.major, firmware->soc.minor);
-	else
-		printk(KERN_INFO "qe-firmware: firmware '%s'\n",
-			firmware->id);
-
-	/*
-	 * The QE only supports one microcode per RISC, so clear out all the
-	 * saved microcode information and put in the new.
-	 */
-	memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
-	strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id));
-	qe_firmware_info.extended_modes = firmware->extended_modes;
-	memcpy(qe_firmware_info.vtraps, firmware->vtraps,
-		sizeof(firmware->vtraps));
-
-	/* Loop through each microcode. */
-	for (i = 0; i < firmware->count; i++) {
-		const struct qe_microcode *ucode = &firmware->microcode[i];
-
-		/* Upload a microcode if it's present */
-		if (ucode->code_offset)
-			qe_upload_microcode(firmware, ucode);
-
-		/* Program the traps for this processor */
-		for (j = 0; j < 16; j++) {
-			u32 trap = be32_to_cpu(ucode->traps[j]);
-
-			if (trap)
-				out_be32(&qe_immr->rsp[i].tibcr[j], trap);
-		}
-
-		/* Enable traps */
-		out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
-	}
-
-	qe_firmware_uploaded = 1;
-
-	return 0;
-}
-EXPORT_SYMBOL(qe_upload_firmware);
-
-/*
- * Get info on the currently-loaded firmware
- *
- * This function also checks the device tree to see if the boot loader has
- * uploaded a firmware already.
- */
-struct qe_firmware_info *qe_get_firmware_info(void)
-{
-	static int initialized;
-	struct property *prop;
-	struct device_node *qe;
-	struct device_node *fw = NULL;
-	const char *sprop;
-	unsigned int i;
-
-	/*
-	 * If we haven't checked yet, and a driver hasn't uploaded a firmware
-	 * yet, then check the device tree for information.
-	 */
-	if (qe_firmware_uploaded)
-		return &qe_firmware_info;
-
-	if (initialized)
-		return NULL;
-
-	initialized = 1;
-
-	/*
-	 * Newer device trees have an "fsl,qe" compatible property for the QE
-	 * node, but we still need to support older device trees.
-	*/
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return NULL;
-	}
-
-	/* Find the 'firmware' child node */
-	for_each_child_of_node(qe, fw) {
-		if (strcmp(fw->name, "firmware") == 0)
-			break;
-	}
-
-	of_node_put(qe);
-
-	/* Did we find the 'firmware' node? */
-	if (!fw)
-		return NULL;
-
-	qe_firmware_uploaded = 1;
-
-	/* Copy the data into qe_firmware_info*/
-	sprop = of_get_property(fw, "id", NULL);
-	if (sprop)
-		strlcpy(qe_firmware_info.id, sprop,
-			sizeof(qe_firmware_info.id));
-
-	prop = of_find_property(fw, "extended-modes", NULL);
-	if (prop && (prop->length == sizeof(u64))) {
-		const u64 *iprop = prop->value;
-
-		qe_firmware_info.extended_modes = *iprop;
-	}
-
-	prop = of_find_property(fw, "virtual-traps", NULL);
-	if (prop && (prop->length == 32)) {
-		const u32 *iprop = prop->value;
-
-		for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
-			qe_firmware_info.vtraps[i] = iprop[i];
-	}
-
-	of_node_put(fw);
-
-	return &qe_firmware_info;
-}
-EXPORT_SYMBOL(qe_get_firmware_info);
-
-unsigned int qe_get_num_of_risc(void)
-{
-	struct device_node *qe;
-	int size;
-	unsigned int num_of_risc = 0;
-	const u32 *prop;
-
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		/* Older devices trees did not have an "fsl,qe"
-		 * compatible property, so we need to look for
-		 * the QE node by name.
-		 */
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return num_of_risc;
-	}
-
-	prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
-	if (prop && size == sizeof(*prop))
-		num_of_risc = *prop;
-
-	of_node_put(qe);
-
-	return num_of_risc;
-}
-EXPORT_SYMBOL(qe_get_num_of_risc);
-
-unsigned int qe_get_num_of_snums(void)
-{
-	struct device_node *qe;
-	int size;
-	unsigned int num_of_snums;
-	const u32 *prop;
-
-	num_of_snums = 28; /* The default number of snum for threads is 28 */
-	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!qe) {
-		/* Older devices trees did not have an "fsl,qe"
-		 * compatible property, so we need to look for
-		 * the QE node by name.
-		 */
-		qe = of_find_node_by_type(NULL, "qe");
-		if (!qe)
-			return num_of_snums;
-	}
-
-	prop = of_get_property(qe, "fsl,qe-num-snums", &size);
-	if (prop && size == sizeof(*prop)) {
-		num_of_snums = *prop;
-		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
-			/* No QE ever has fewer than 28 SNUMs */
-			pr_err("QE: number of snum is invalid\n");
-			of_node_put(qe);
-			return -EINVAL;
-		}
-	}
-
-	of_node_put(qe);
-
-	return num_of_snums;
-}
-EXPORT_SYMBOL(qe_get_num_of_snums);
-
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
-static int qe_resume(struct platform_device *ofdev)
-{
-	if (!qe_alive_during_sleep())
-		qe_reset();
-	return 0;
-}
-
-static int qe_probe(struct platform_device *ofdev)
-{
-	return 0;
-}
-
-static const struct of_device_id qe_ids[] = {
-	{ .compatible = "fsl,qe", },
-	{ },
-};
-
-static struct platform_driver qe_driver = {
-	.driver = {
-		.name = "fsl-qe",
-		.of_match_table = qe_ids,
-	},
-	.probe = qe_probe,
-	.resume = qe_resume,
-};
-
-static int __init qe_drv_init(void)
-{
-	return platform_driver_register(&qe_driver);
-}
-device_initcall(qe_drv_init);
-#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
deleted file mode 100644
index ef36f16f9f6f..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.c
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * QUICC ENGINE Interrupt Controller
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/qe_ic.h>
-
-#include "qe_ic.h"
-
-static DEFINE_RAW_SPINLOCK(qe_ic_lock);
-
-static struct qe_ic_info qe_ic_info[] = {
-	[1] = {
-	       .mask = 0x00008000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 0,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[2] = {
-	       .mask = 0x00004000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 1,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[3] = {
-	       .mask = 0x00002000,
-	       .mask_reg = QEIC_CIMR,
-	       .pri_code = 2,
-	       .pri_reg = QEIC_CIPWCC,
-	       },
-	[10] = {
-		.mask = 0x00000040,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[11] = {
-		.mask = 0x00000020,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[12] = {
-		.mask = 0x00000010,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[13] = {
-		.mask = 0x00000008,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 4,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[14] = {
-		.mask = 0x00000004,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 5,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[15] = {
-		.mask = 0x00000002,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 6,
-		.pri_reg = QEIC_CIPZCC,
-		},
-	[20] = {
-		.mask = 0x10000000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPRTA,
-		},
-	[25] = {
-		.mask = 0x00800000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[26] = {
-		.mask = 0x00400000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[27] = {
-		.mask = 0x00200000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[28] = {
-		.mask = 0x00100000,
-		.mask_reg = QEIC_CRIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPRTB,
-		},
-	[32] = {
-		.mask = 0x80000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[33] = {
-		.mask = 0x40000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[34] = {
-		.mask = 0x20000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[35] = {
-		.mask = 0x10000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[36] = {
-		.mask = 0x08000000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 4,
-		.pri_reg = QEIC_CIPXCC,
-		},
-	[40] = {
-		.mask = 0x00800000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 0,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[41] = {
-		.mask = 0x00400000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 1,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[42] = {
-		.mask = 0x00200000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 2,
-		.pri_reg = QEIC_CIPYCC,
-		},
-	[43] = {
-		.mask = 0x00100000,
-		.mask_reg = QEIC_CIMR,
-		.pri_code = 3,
-		.pri_reg = QEIC_CIPYCC,
-		},
-};
-
-static inline u32 qe_ic_read(volatile __be32  __iomem * base, unsigned int reg)
-{
-	return in_be32(base + (reg >> 2));
-}
-
-static inline void qe_ic_write(volatile __be32  __iomem * base, unsigned int reg,
-			       u32 value)
-{
-	out_be32(base + (reg >> 2), value);
-}
-
-static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
-{
-	return irq_get_chip_data(virq);
-}
-
-static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d)
-{
-	return irq_data_get_irq_chip_data(d);
-}
-
-static void qe_ic_unmask_irq(struct irq_data *d)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = irqd_to_hwirq(d);
-	unsigned long flags;
-	u32 temp;
-
-	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-		    temp | qe_ic_info[src].mask);
-
-	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq(struct irq_data *d)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq_data(d);
-	unsigned int src = irqd_to_hwirq(d);
-	unsigned long flags;
-	u32 temp;
-
-	raw_spin_lock_irqsave(&qe_ic_lock, flags);
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-		    temp & ~qe_ic_info[src].mask);
-
-	/* Flush the above write before enabling interrupts; otherwise,
-	 * spurious interrupts will sometimes happen.  To be 100% sure
-	 * that the write has reached the device before interrupts are
-	 * enabled, the mask register would have to be read back; however,
-	 * this is not required for correctness, only to avoid wasting
-	 * time on a large number of spurious interrupts.  In testing,
-	 * a sync reduced the observed spurious interrupts to zero.
-	 */
-	mb();
-
-	raw_spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static struct irq_chip qe_ic_irq_chip = {
-	.name = "QEIC",
-	.irq_unmask = qe_ic_unmask_irq,
-	.irq_mask = qe_ic_mask_irq,
-	.irq_mask_ack = qe_ic_mask_irq,
-};
-
-static int qe_ic_host_match(struct irq_domain *h, struct device_node *node,
-			    enum irq_domain_bus_token bus_token)
-{
-	/* Exact match, unless qe_ic node is NULL */
-	struct device_node *of_node = irq_domain_get_of_node(h);
-	return of_node == NULL || of_node == node;
-}
-
-static int qe_ic_host_map(struct irq_domain *h, unsigned int virq,
-			  irq_hw_number_t hw)
-{
-	struct qe_ic *qe_ic = h->host_data;
-	struct irq_chip *chip;
-
-	if (qe_ic_info[hw].mask == 0) {
-		printk(KERN_ERR "Can't map reserved IRQ\n");
-		return -EINVAL;
-	}
-	/* Default chip */
-	chip = &qe_ic->hc_irq;
-
-	irq_set_chip_data(virq, qe_ic);
-	irq_set_status_flags(virq, IRQ_LEVEL);
-
-	irq_set_chip_and_handler(virq, chip, handle_level_irq);
-
-	return 0;
-}
-
-static const struct irq_domain_ops qe_ic_host_ops = {
-	.match = qe_ic_host_match,
-	.map = qe_ic_host_map,
-	.xlate = irq_domain_xlate_onetwocell,
-};
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{
-	int irq;
-
-	BUG_ON(qe_ic == NULL);
-
-	/* get the interrupt source vector. */
-	irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
-
-	if (irq == 0)
-		return NO_IRQ;
-
-	return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{
-	int irq;
-
-	BUG_ON(qe_ic == NULL);
-
-	/* get the interrupt source vector. */
-	irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
-
-	if (irq == 0)
-		return NO_IRQ;
-
-	return irq_linear_revmap(qe_ic->irqhost, irq);
-}
-
-void __init qe_ic_init(struct device_node *node, unsigned int flags,
-		       void (*low_handler)(struct irq_desc *desc),
-		       void (*high_handler)(struct irq_desc *desc))
-{
-	struct qe_ic *qe_ic;
-	struct resource res;
-	u32 temp = 0, ret, high_active = 0;
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret)
-		return;
-
-	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
-	if (qe_ic == NULL)
-		return;
-
-	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
-					       &qe_ic_host_ops, qe_ic);
-	if (qe_ic->irqhost == NULL) {
-		kfree(qe_ic);
-		return;
-	}
-
-	qe_ic->regs = ioremap(res.start, resource_size(&res));
-
-	qe_ic->hc_irq = qe_ic_irq_chip;
-
-	qe_ic->virq_high = irq_of_parse_and_map(node, 0);
-	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
-
-	if (qe_ic->virq_low == NO_IRQ) {
-		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
-		kfree(qe_ic);
-		return;
-	}
-
-	/* default priority scheme is grouped. If spread mode is    */
-	/* required, configure cicr accordingly.                    */
-	if (flags & QE_IC_SPREADMODE_GRP_W)
-		temp |= CICR_GWCC;
-	if (flags & QE_IC_SPREADMODE_GRP_X)
-		temp |= CICR_GXCC;
-	if (flags & QE_IC_SPREADMODE_GRP_Y)
-		temp |= CICR_GYCC;
-	if (flags & QE_IC_SPREADMODE_GRP_Z)
-		temp |= CICR_GZCC;
-	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
-		temp |= CICR_GRTA;
-	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
-		temp |= CICR_GRTB;
-
-	/* choose destination signal for highest priority interrupt */
-	if (flags & QE_IC_HIGH_SIGNAL) {
-		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
-		high_active = 1;
-	}
-
-	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-
-	irq_set_handler_data(qe_ic->virq_low, qe_ic);
-	irq_set_chained_handler(qe_ic->virq_low, low_handler);
-
-	if (qe_ic->virq_high != NO_IRQ &&
-			qe_ic->virq_high != qe_ic->virq_low) {
-		irq_set_handler_data(qe_ic->virq_high, qe_ic);
-		irq_set_chained_handler(qe_ic->virq_high, high_handler);
-	}
-}
-
-void qe_ic_set_highest_priority(unsigned int virq, int high)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp = 0;
-
-	temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
-
-	temp &= ~CICR_HP_MASK;
-	temp |= src << CICR_HP_SHIFT;
-
-	temp &= ~CICR_HPIT_MASK;
-	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
-
-	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-}
-
-/* Set Priority level within its group, from 1 to 8 */
-int qe_ic_set_priority(unsigned int virq, unsigned int priority)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp;
-
-	if (priority > 8 || priority == 0)
-		return -EINVAL;
-	if (src > 127)
-		return -EINVAL;
-	if (qe_ic_info[src].pri_reg == 0)
-		return -EINVAL;
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
-
-	if (priority < 4) {
-		temp &= ~(0x7 << (32 - priority * 3));
-		temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
-	} else {
-		temp &= ~(0x7 << (24 - priority * 3));
-		temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
-	}
-
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
-
-	return 0;
-}
-
-/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	u32 temp, control_reg = QEIC_CICNR, shift = 0;
-
-	if (priority > 2 || priority == 0)
-		return -EINVAL;
-
-	switch (qe_ic_info[src].pri_reg) {
-	case QEIC_CIPZCC:
-		shift = CICNR_ZCC1T_SHIFT;
-		break;
-	case QEIC_CIPWCC:
-		shift = CICNR_WCC1T_SHIFT;
-		break;
-	case QEIC_CIPYCC:
-		shift = CICNR_YCC1T_SHIFT;
-		break;
-	case QEIC_CIPXCC:
-		shift = CICNR_XCC1T_SHIFT;
-		break;
-	case QEIC_CIPRTA:
-		shift = CRICR_RTA1T_SHIFT;
-		control_reg = QEIC_CRICR;
-		break;
-	case QEIC_CIPRTB:
-		shift = CRICR_RTB1T_SHIFT;
-		control_reg = QEIC_CRICR;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	shift += (2 - priority) * 2;
-	temp = qe_ic_read(qe_ic->regs, control_reg);
-	temp &= ~(SIGNAL_MASK << shift);
-	temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
-	qe_ic_write(qe_ic->regs, control_reg, temp);
-
-	return 0;
-}
-
-static struct bus_type qe_ic_subsys = {
-	.name = "qe_ic",
-	.dev_name = "qe_ic",
-};
-
-static struct device device_qe_ic = {
-	.id = 0,
-	.bus = &qe_ic_subsys,
-};
-
-static int __init init_qe_ic_sysfs(void)
-{
-	int rc;
-
-	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-
-	rc = subsys_system_register(&qe_ic_subsys, NULL);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys class\n");
-		return -ENODEV;
-	}
-	rc = device_register(&device_qe_ic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys device\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_qe_ic_sysfs);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.h b/arch/powerpc/sysdev/qe_lib/qe_ic.h
deleted file mode 100644
index efef7ab9b753..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <asm/qe_ic.h>
-
-#define NR_QE_IC_INTS		64
-
-/* QE IC registers offset */
-#define QEIC_CICR		0x00
-#define QEIC_CIVEC		0x04
-#define QEIC_CRIPNR		0x08
-#define QEIC_CIPNR		0x0c
-#define QEIC_CIPXCC		0x10
-#define QEIC_CIPYCC		0x14
-#define QEIC_CIPWCC		0x18
-#define QEIC_CIPZCC		0x1c
-#define QEIC_CIMR		0x20
-#define QEIC_CRIMR		0x24
-#define QEIC_CICNR		0x28
-#define QEIC_CIPRTA		0x30
-#define QEIC_CIPRTB		0x34
-#define QEIC_CRICR		0x3c
-#define QEIC_CHIVEC		0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0	29
-#define CIPCC_SHIFT_PRI1	26
-#define CIPCC_SHIFT_PRI2	23
-#define CIPCC_SHIFT_PRI3	20
-#define CIPCC_SHIFT_PRI4	13
-#define CIPCC_SHIFT_PRI5	10
-#define CIPCC_SHIFT_PRI6	7
-#define CIPCC_SHIFT_PRI7	4
-
-/* CICR priority modes */
-#define CICR_GWCC		0x00040000
-#define CICR_GXCC		0x00020000
-#define CICR_GYCC		0x00010000
-#define CICR_GZCC		0x00080000
-#define CICR_GRTA		0x00200000
-#define CICR_GRTB		0x00400000
-#define CICR_HPIT_SHIFT		8
-#define CICR_HPIT_MASK		0x00000300
-#define CICR_HP_SHIFT		24
-#define CICR_HP_MASK		0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT	20
-#define CICNR_ZCC1T_SHIFT	28
-#define CICNR_YCC1T_SHIFT	12
-#define CICNR_XCC1T_SHIFT	4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT	20
-#define CRICR_RTB1T_SHIFT	28
-
-/* Signal indicator */
-#define SIGNAL_MASK		3
-#define SIGNAL_HIGH		2
-#define SIGNAL_LOW		0
-
-struct qe_ic {
-	/* Control registers offset */
-	volatile u32 __iomem *regs;
-
-	/* The remapper for this QEIC */
-	struct irq_domain *irqhost;
-
-	/* The "linux" controller struct */
-	struct irq_chip hc_irq;
-
-	/* VIRQ numbers of QE high/low irqs */
-	unsigned int virq_high;
-	unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
-	u32	mask;	  /* location of this source at the QIMR register. */
-	u32	mask_reg; /* Mask register offset */
-	u8	pri_code; /* for grouped interrupts sources - the interrupt
-			     code as appears at the group priority register */
-	u32	pri_reg;  /* Group priority register offset */
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
deleted file mode 100644
index 7ea0174f6d3d..000000000000
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/qe_io.c
- *
- * QE Parallel I/O ports configuration routines
- *
- * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <LeoLi@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/qe.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-static struct qe_pio_regs __iomem *par_io;
-static int num_par_io_ports = 0;
-
-int par_io_init(struct device_node *np)
-{
-	struct resource res;
-	int ret;
-	const u32 *num_ports;
-
-	/* Map Parallel I/O ports registers */
-	ret = of_address_to_resource(np, 0, &res);
-	if (ret)
-		return ret;
-	par_io = ioremap(res.start, resource_size(&res));
-
-	num_ports = of_get_property(np, "num-ports", NULL);
-	if (num_ports)
-		num_par_io_ports = *num_ports;
-
-	return 0;
-}
-
-void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
-			 int open_drain, int assignment, int has_irq)
-{
-	u32 pin_mask1bit;
-	u32 pin_mask2bits;
-	u32 new_mask2bits;
-	u32 tmp_val;
-
-	/* calculate pin location for single and 2 bits information */
-	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
-
-	/* Set open drain, if required */
-	tmp_val = in_be32(&par_io->cpodr);
-	if (open_drain)
-		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
-	else
-		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
-
-	/* define direction */
-	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
-		in_be32(&par_io->cpdir2) :
-		in_be32(&par_io->cpdir1);
-
-	/* get all bits mask for 2 bit per port */
-	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
-				(pin % (QE_PIO_PINS / 2) + 1) * 2));
-
-	/* Get the final mask we need for the right definition */
-	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
-				(pin % (QE_PIO_PINS / 2) + 1) * 2));
-
-	/* clear and set 2 bits mask */
-	if (pin > (QE_PIO_PINS / 2) - 1) {
-		out_be32(&par_io->cpdir2,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
-	} else {
-		out_be32(&par_io->cpdir1,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
-	}
-	/* define pin assignment */
-	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
-		in_be32(&par_io->cppar2) :
-		in_be32(&par_io->cppar1);
-
-	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
-			(pin % (QE_PIO_PINS / 2) + 1) * 2));
-	/* clear and set 2 bits mask */
-	if (pin > (QE_PIO_PINS / 2) - 1) {
-		out_be32(&par_io->cppar2,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
-	} else {
-		out_be32(&par_io->cppar1,
-			 ~pin_mask2bits & tmp_val);
-		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
-	}
-}
-EXPORT_SYMBOL(__par_io_config_pin);
-
-int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-		      int assignment, int has_irq)
-{
-	if (!par_io || port >= num_par_io_ports)
-		return -EINVAL;
-
-	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
-			    has_irq);
-	return 0;
-}
-EXPORT_SYMBOL(par_io_config_pin);
-
-int par_io_data_set(u8 port, u8 pin, u8 val)
-{
-	u32 pin_mask, tmp_val;
-
-	if (port >= num_par_io_ports)
-		return -EINVAL;
-	if (pin >= QE_PIO_PINS)
-		return -EINVAL;
-	/* calculate pin location */
-	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
-
-	tmp_val = in_be32(&par_io[port].cpdata);
-
-	if (val == 0)		/* clear */
-		out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
-	else			/* set */
-		out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
-
-	return 0;
-}
-EXPORT_SYMBOL(par_io_data_set);
-
-int par_io_of_config(struct device_node *np)
-{
-	struct device_node *pio;
-	const phandle *ph;
-	int pio_map_len;
-	const unsigned int *pio_map;
-
-	if (par_io == NULL) {
-		printk(KERN_ERR "par_io not initialized\n");
-		return -1;
-	}
-
-	ph = of_get_property(np, "pio-handle", NULL);
-	if (ph == NULL) {
-		printk(KERN_ERR "pio-handle not available\n");
-		return -1;
-	}
-
-	pio = of_find_node_by_phandle(*ph);
-
-	pio_map = of_get_property(pio, "pio-map", &pio_map_len);
-	if (pio_map == NULL) {
-		printk(KERN_ERR "pio-map is not set!\n");
-		return -1;
-	}
-	pio_map_len /= sizeof(unsigned int);
-	if ((pio_map_len % 6) != 0) {
-		printk(KERN_ERR "pio-map format wrong!\n");
-		return -1;
-	}
-
-	while (pio_map_len > 0) {
-		par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
-				(int) pio_map[2], (int) pio_map[3],
-				(int) pio_map[4], (int) pio_map[5]);
-		pio_map += 6;
-		pio_map_len -= 6;
-	}
-	of_node_put(pio);
-	return 0;
-}
-EXPORT_SYMBOL(par_io_of_config);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
deleted file mode 100644
index 621575b7e84a..000000000000
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * arch/powerpc/sysdev/qe_lib/ucc.c
- *
- * QE UCC API Set - UCC specific routines implementations.
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/stddef.h>
-#include <linux/spinlock.h>
-#include <linux/export.h>
-
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-#include <asm/ucc.h>
-
-int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
-{
-	unsigned long flags;
-
-	if (ucc_num > UCC_MAX_NUM - 1)
-		return -EINVAL;
-
-	spin_lock_irqsave(&cmxgcr_lock, flags);
-	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
-		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
-	spin_unlock_irqrestore(&cmxgcr_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
-
-/* Configure the UCC to either Slow or Fast.
- *
- * A given UCC can be figured to support either "slow" devices (e.g. UART)
- * or "fast" devices (e.g. Ethernet).
- *
- * 'ucc_num' is the UCC number, from 0 - 7.
- *
- * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
- * must always be set to 1.
- */
-int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
-{
-	u8 __iomem *guemr;
-
-	/* The GUEMR register is at the same location for both slow and fast
-	   devices, so we just use uccX.slow.guemr. */
-	switch (ucc_num) {
-	case 0: guemr = &qe_immr->ucc1.slow.guemr;
-		break;
-	case 1: guemr = &qe_immr->ucc2.slow.guemr;
-		break;
-	case 2: guemr = &qe_immr->ucc3.slow.guemr;
-		break;
-	case 3: guemr = &qe_immr->ucc4.slow.guemr;
-		break;
-	case 4: guemr = &qe_immr->ucc5.slow.guemr;
-		break;
-	case 5: guemr = &qe_immr->ucc6.slow.guemr;
-		break;
-	case 6: guemr = &qe_immr->ucc7.slow.guemr;
-		break;
-	case 7: guemr = &qe_immr->ucc8.slow.guemr;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
-		UCC_GUEMR_SET_RESERVED3 | speed);
-
-	return 0;
-}
-
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
-	unsigned int *reg_num, unsigned int *shift)
-{
-	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
-
-	*reg_num = cmx + 1;
-	*cmxucr = &qe_immr->qmx.cmxucr[cmx];
-	*shift = 16 - 8 * (ucc_num & 2);
-}
-
-int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
-{
-	__be32 __iomem *cmxucr;
-	unsigned int reg_num;
-	unsigned int shift;
-
-	/* check if the UCC number is in range. */
-	if (ucc_num > UCC_MAX_NUM - 1)
-		return -EINVAL;
-
-	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
-
-	if (set)
-		setbits32(cmxucr, mask << shift);
-	else
-		clrbits32(cmxucr, mask << shift);
-
-	return 0;
-}
-
-int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
-	enum comm_dir mode)
-{
-	__be32 __iomem *cmxucr;
-	unsigned int reg_num;
-	unsigned int shift;
-	u32 clock_bits = 0;
-
-	/* check if the UCC number is in range. */
-	if (ucc_num > UCC_MAX_NUM - 1)
-		return -EINVAL;
-
-	/* The communications direction must be RX or TX */
-	if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
-		return -EINVAL;
-
-	get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
-
-	switch (reg_num) {
-	case 1:
-		switch (clock) {
-		case QE_BRG1:	clock_bits = 1; break;
-		case QE_BRG2:	clock_bits = 2; break;
-		case QE_BRG7:	clock_bits = 3; break;
-		case QE_BRG8:	clock_bits = 4; break;
-		case QE_CLK9:	clock_bits = 5; break;
-		case QE_CLK10:	clock_bits = 6; break;
-		case QE_CLK11:	clock_bits = 7; break;
-		case QE_CLK12:	clock_bits = 8; break;
-		case QE_CLK15:	clock_bits = 9; break;
-		case QE_CLK16:	clock_bits = 10; break;
-		default: break;
-		}
-		break;
-	case 2:
-		switch (clock) {
-		case QE_BRG5:	clock_bits = 1; break;
-		case QE_BRG6:	clock_bits = 2; break;
-		case QE_BRG7:	clock_bits = 3; break;
-		case QE_BRG8:	clock_bits = 4; break;
-		case QE_CLK13:	clock_bits = 5; break;
-		case QE_CLK14:	clock_bits = 6; break;
-		case QE_CLK19:	clock_bits = 7; break;
-		case QE_CLK20:	clock_bits = 8; break;
-		case QE_CLK15:	clock_bits = 9; break;
-		case QE_CLK16:	clock_bits = 10; break;
-		default: break;
-		}
-		break;
-	case 3:
-		switch (clock) {
-		case QE_BRG9:	clock_bits = 1; break;
-		case QE_BRG10:	clock_bits = 2; break;
-		case QE_BRG15:	clock_bits = 3; break;
-		case QE_BRG16:	clock_bits = 4; break;
-		case QE_CLK3:	clock_bits = 5; break;
-		case QE_CLK4:	clock_bits = 6; break;
-		case QE_CLK17:	clock_bits = 7; break;
-		case QE_CLK18:	clock_bits = 8; break;
-		case QE_CLK7:	clock_bits = 9; break;
-		case QE_CLK8:	clock_bits = 10; break;
-		case QE_CLK16:	clock_bits = 11; break;
-		default: break;
-		}
-		break;
-	case 4:
-		switch (clock) {
-		case QE_BRG13:	clock_bits = 1; break;
-		case QE_BRG14:	clock_bits = 2; break;
-		case QE_BRG15:	clock_bits = 3; break;
-		case QE_BRG16:	clock_bits = 4; break;
-		case QE_CLK5:	clock_bits = 5; break;
-		case QE_CLK6:	clock_bits = 6; break;
-		case QE_CLK21:	clock_bits = 7; break;
-		case QE_CLK22:	clock_bits = 8; break;
-		case QE_CLK7:	clock_bits = 9; break;
-		case QE_CLK8:	clock_bits = 10; break;
-		case QE_CLK16:	clock_bits = 11; break;
-		default: break;
-		}
-		break;
-	default: break;
-	}
-
-	/* Check for invalid combination of clock and UCC number */
-	if (!clock_bits)
-		return -ENOENT;
-
-	if (mode == COMM_DIR_RX)
-		shift += 4;
-
-	clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
-		clock_bits << shift);
-
-	return 0;
-}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
deleted file mode 100644
index 65aaf15032ae..000000000000
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE UCC Fast API Set - UCC Fast specific routines implementations.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-#include <asm/ucc_fast.h>
-
-void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
-{
-	printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
-	printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
-
-	printk(KERN_INFO "gumr  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
-	printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
-	printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
-	printk(KERN_INFO "udsr  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
-	printk(KERN_INFO "ucce  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
-	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
-	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
-	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
-	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
-	printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
-	printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
-	printk(KERN_INFO "utfb  : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
-	printk(KERN_INFO "utfs  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
-	printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
-	printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
-	printk(KERN_INFO "utpt  : addr=0x%p, val=0x%04x\n",
-		  &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
-	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
-		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
-	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
-}
-EXPORT_SYMBOL(ucc_fast_dump_regs);
-
-u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
-{
-	switch (uccf_num) {
-	case 0: return QE_CR_SUBBLOCK_UCCFAST1;
-	case 1: return QE_CR_SUBBLOCK_UCCFAST2;
-	case 2: return QE_CR_SUBBLOCK_UCCFAST3;
-	case 3: return QE_CR_SUBBLOCK_UCCFAST4;
-	case 4: return QE_CR_SUBBLOCK_UCCFAST5;
-	case 5: return QE_CR_SUBBLOCK_UCCFAST6;
-	case 6: return QE_CR_SUBBLOCK_UCCFAST7;
-	case 7: return QE_CR_SUBBLOCK_UCCFAST8;
-	default: return QE_CR_SUBBLOCK_INVALID;
-	}
-}
-EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
-
-void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
-{
-	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
-}
-EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
-
-void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
-{
-	struct ucc_fast __iomem *uf_regs;
-	u32 gumr;
-
-	uf_regs = uccf->uf_regs;
-
-	/* Enable reception and/or transmission on this UCC. */
-	gumr = in_be32(&uf_regs->gumr);
-	if (mode & COMM_DIR_TX) {
-		gumr |= UCC_FAST_GUMR_ENT;
-		uccf->enabled_tx = 1;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr |= UCC_FAST_GUMR_ENR;
-		uccf->enabled_rx = 1;
-	}
-	out_be32(&uf_regs->gumr, gumr);
-}
-EXPORT_SYMBOL(ucc_fast_enable);
-
-void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
-{
-	struct ucc_fast __iomem *uf_regs;
-	u32 gumr;
-
-	uf_regs = uccf->uf_regs;
-
-	/* Disable reception and/or transmission on this UCC. */
-	gumr = in_be32(&uf_regs->gumr);
-	if (mode & COMM_DIR_TX) {
-		gumr &= ~UCC_FAST_GUMR_ENT;
-		uccf->enabled_tx = 0;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr &= ~UCC_FAST_GUMR_ENR;
-		uccf->enabled_rx = 0;
-	}
-	out_be32(&uf_regs->gumr, gumr);
-}
-EXPORT_SYMBOL(ucc_fast_disable);
-
-int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
-{
-	struct ucc_fast_private *uccf;
-	struct ucc_fast __iomem *uf_regs;
-	u32 gumr;
-	int ret;
-
-	if (!uf_info)
-		return -EINVAL;
-
-	/* check if the UCC port number is in range. */
-	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Check that 'max_rx_buf_length' is properly aligned (4). */
-	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	/* Validate Virtual Fifo register values */
-	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-		printk(KERN_ERR "%s: urfs is too small\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
-		return -EINVAL;
-	}
-
-	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
-	if (!uccf) {
-		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	/* Fill fast UCC structure */
-	uccf->uf_info = uf_info;
-	/* Set the PHY base address */
-	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
-	if (uccf->uf_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
-		kfree(uccf);
-		return -ENOMEM;
-	}
-
-	uccf->enabled_tx = 0;
-	uccf->enabled_rx = 0;
-	uccf->stopped_tx = 0;
-	uccf->stopped_rx = 0;
-	uf_regs = uccf->uf_regs;
-	uccf->p_ucce = &uf_regs->ucce;
-	uccf->p_uccm = &uf_regs->uccm;
-#ifdef CONFIG_UGETH_TX_ON_DEMAND
-	uccf->p_utodr = &uf_regs->utodr;
-#endif
-#ifdef STATISTICS
-	uccf->tx_frames = 0;
-	uccf->rx_frames = 0;
-	uccf->rx_discarded = 0;
-#endif				/* STATISTICS */
-
-	/* Set UCC to fast type */
-	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
-	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
-		ucc_fast_free(uccf);
-		return ret;
-	}
-
-	uccf->mrblr = uf_info->max_rx_buf_length;
-
-	/* Set GUMR */
-	/* For more details see the hardware spec. */
-	gumr = uf_info->ttx_trx;
-	if (uf_info->tci)
-		gumr |= UCC_FAST_GUMR_TCI;
-	if (uf_info->cdp)
-		gumr |= UCC_FAST_GUMR_CDP;
-	if (uf_info->ctsp)
-		gumr |= UCC_FAST_GUMR_CTSP;
-	if (uf_info->cds)
-		gumr |= UCC_FAST_GUMR_CDS;
-	if (uf_info->ctss)
-		gumr |= UCC_FAST_GUMR_CTSS;
-	if (uf_info->txsy)
-		gumr |= UCC_FAST_GUMR_TXSY;
-	if (uf_info->rsyn)
-		gumr |= UCC_FAST_GUMR_RSYN;
-	gumr |= uf_info->synl;
-	if (uf_info->rtsm)
-		gumr |= UCC_FAST_GUMR_RTSM;
-	gumr |= uf_info->renc;
-	if (uf_info->revd)
-		gumr |= UCC_FAST_GUMR_REVD;
-	gumr |= uf_info->tenc;
-	gumr |= uf_info->tcrc;
-	gumr |= uf_info->mode;
-	out_be32(&uf_regs->gumr, gumr);
-
-	/* Allocate memory for Tx Virtual Fifo */
-	uccf->ucc_fast_tx_virtual_fifo_base_offset =
-	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
-	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
-			__func__);
-		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
-		ucc_fast_free(uccf);
-		return -ENOMEM;
-	}
-
-	/* Allocate memory for Rx Virtual Fifo */
-	uccf->ucc_fast_rx_virtual_fifo_base_offset =
-		qe_muram_alloc(uf_info->urfs +
-			   UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
-			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
-	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
-			__func__);
-		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
-		ucc_fast_free(uccf);
-		return -ENOMEM;
-	}
-
-	/* Set Virtual Fifo registers */
-	out_be16(&uf_regs->urfs, uf_info->urfs);
-	out_be16(&uf_regs->urfet, uf_info->urfet);
-	out_be16(&uf_regs->urfset, uf_info->urfset);
-	out_be16(&uf_regs->utfs, uf_info->utfs);
-	out_be16(&uf_regs->utfet, uf_info->utfet);
-	out_be16(&uf_regs->utftt, uf_info->utftt);
-	/* utfb, urfb are offsets from MURAM base */
-	out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
-	out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
-
-	/* Mux clocking */
-	/* Grant Support */
-	ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support);
-	/* Breakpoint Support */
-	ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support);
-	/* Set Tsa or NMSI mode. */
-	ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa);
-	/* If NMSI (not Tsa), set Tx and Rx clock. */
-	if (!uf_info->tsa) {
-		/* Rx clock routing */
-		if ((uf_info->rx_clock != QE_CLK_NONE) &&
-		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
-					COMM_DIR_RX)) {
-			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __func__);
-			ucc_fast_free(uccf);
-			return -EINVAL;
-		}
-		/* Tx clock routing */
-		if ((uf_info->tx_clock != QE_CLK_NONE) &&
-		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
-					COMM_DIR_TX)) {
-			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __func__);
-			ucc_fast_free(uccf);
-			return -EINVAL;
-		}
-	}
-
-	/* Set interrupt mask register at UCC level. */
-	out_be32(&uf_regs->uccm, uf_info->uccm_mask);
-
-	/* First, clear anything pending at UCC level,
-	 * otherwise, old garbage may come through
-	 * as soon as the dam is opened. */
-
-	/* Writing '1' clears */
-	out_be32(&uf_regs->ucce, 0xffffffff);
-
-	*uccf_ret = uccf;
-	return 0;
-}
-EXPORT_SYMBOL(ucc_fast_init);
-
-void ucc_fast_free(struct ucc_fast_private * uccf)
-{
-	if (!uccf)
-		return;
-
-	if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
-		qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
-
-	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
-		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
-
-	if (uccf->uf_regs)
-		iounmap(uccf->uf_regs);
-
-	kfree(uccf);
-}
-EXPORT_SYMBOL(ucc_fast_free);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
deleted file mode 100644
index 5f91628209eb..000000000000
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: 	Shlomi Gridish <gridish@freescale.com>
- * 		Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE UCC Slow API Set - UCC Slow specific routines implementations.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/export.h>
-
-#include <asm/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-#include <asm/ucc.h>
-#include <asm/ucc_slow.h>
-
-u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
-{
-	switch (uccs_num) {
-	case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
-	case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
-	case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
-	case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
-	case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
-	case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
-	case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
-	case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
-	default: return QE_CR_SUBBLOCK_INVALID;
-	}
-}
-EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock);
-
-void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
-{
-	struct ucc_slow_info *us_info = uccs->us_info;
-	u32 id;
-
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
-			 QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_graceful_stop_tx);
-
-void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
-{
-	struct ucc_slow_info *us_info = uccs->us_info;
-	u32 id;
-
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_stop_tx);
-
-void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
-{
-	struct ucc_slow_info *us_info = uccs->us_info;
-	u32 id;
-
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
-}
-EXPORT_SYMBOL(ucc_slow_restart_tx);
-
-void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
-{
-	struct ucc_slow *us_regs;
-	u32 gumr_l;
-
-	us_regs = uccs->us_regs;
-
-	/* Enable reception and/or transmission on this UCC. */
-	gumr_l = in_be32(&us_regs->gumr_l);
-	if (mode & COMM_DIR_TX) {
-		gumr_l |= UCC_SLOW_GUMR_L_ENT;
-		uccs->enabled_tx = 1;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr_l |= UCC_SLOW_GUMR_L_ENR;
-		uccs->enabled_rx = 1;
-	}
-	out_be32(&us_regs->gumr_l, gumr_l);
-}
-EXPORT_SYMBOL(ucc_slow_enable);
-
-void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
-{
-	struct ucc_slow *us_regs;
-	u32 gumr_l;
-
-	us_regs = uccs->us_regs;
-
-	/* Disable reception and/or transmission on this UCC. */
-	gumr_l = in_be32(&us_regs->gumr_l);
-	if (mode & COMM_DIR_TX) {
-		gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
-		uccs->enabled_tx = 0;
-	}
-	if (mode & COMM_DIR_RX) {
-		gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
-		uccs->enabled_rx = 0;
-	}
-	out_be32(&us_regs->gumr_l, gumr_l);
-}
-EXPORT_SYMBOL(ucc_slow_disable);
-
-/* Initialize the UCC for Slow operations
- *
- * The caller should initialize the following us_info
- */
-int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
-{
-	struct ucc_slow_private *uccs;
-	u32 i;
-	struct ucc_slow __iomem *us_regs;
-	u32 gumr;
-	struct qe_bd *bd;
-	u32 id;
-	u32 command;
-	int ret = 0;
-
-	if (!us_info)
-		return -EINVAL;
-
-	/* check if the UCC port number is in range. */
-	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
-		return -EINVAL;
-	}
-
-	/*
-	 * Set mrblr
-	 * Check that 'max_rx_buf_length' is properly aligned (4), unless
-	 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
-	 * case when QE accepts 32 bits at a time.
-	 */
-	if ((!us_info->rfw) &&
-		(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
-		printk(KERN_ERR "max_rx_buf_length not aligned.\n");
-		return -EINVAL;
-	}
-
-	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
-	if (!uccs) {
-		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	/* Fill slow UCC structure */
-	uccs->us_info = us_info;
-	/* Set the PHY base address */
-	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
-	if (uccs->us_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
-		kfree(uccs);
-		return -ENOMEM;
-	}
-
-	uccs->saved_uccm = 0;
-	uccs->p_rx_frame = 0;
-	us_regs = uccs->us_regs;
-	uccs->p_ucce = (u16 *) & (us_regs->ucce);
-	uccs->p_uccm = (u16 *) & (us_regs->uccm);
-#ifdef STATISTICS
-	uccs->rx_frames = 0;
-	uccs->tx_frames = 0;
-	uccs->rx_discarded = 0;
-#endif				/* STATISTICS */
-
-	/* Get PRAM base */
-	uccs->us_pram_offset =
-		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
-	if (IS_ERR_VALUE(uccs->us_pram_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
-		ucc_slow_free(uccs);
-		return -ENOMEM;
-	}
-	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
-	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
-		     uccs->us_pram_offset);
-
-	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
-
-	/* Set UCC to slow type */
-	ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
-	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type", __func__);
-		ucc_slow_free(uccs);
-		return ret;
-	}
-
-	out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
-
-	INIT_LIST_HEAD(&uccs->confQ);
-
-	/* Allocate BDs. */
-	uccs->rx_base_offset =
-		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
-				QE_ALIGNMENT_OF_BD);
-	if (IS_ERR_VALUE(uccs->rx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
-			us_info->rx_bd_ring_len);
-		uccs->rx_base_offset = 0;
-		ucc_slow_free(uccs);
-		return -ENOMEM;
-	}
-
-	uccs->tx_base_offset =
-		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
-			QE_ALIGNMENT_OF_BD);
-	if (IS_ERR_VALUE(uccs->tx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
-		uccs->tx_base_offset = 0;
-		ucc_slow_free(uccs);
-		return -ENOMEM;
-	}
-
-	/* Init Tx bds */
-	bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
-	for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
-		/* clear bd buffer */
-		out_be32(&bd->buf, 0);
-		/* set bd status and length */
-		out_be32((u32 *) bd, 0);
-		bd++;
-	}
-	/* for last BD set Wrap bit */
-	out_be32(&bd->buf, 0);
-	out_be32((u32 *) bd, cpu_to_be32(T_W));
-
-	/* Init Rx bds */
-	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
-	for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
-		/* set bd status and length */
-		out_be32((u32*)bd, 0);
-		/* clear bd buffer */
-		out_be32(&bd->buf, 0);
-		bd++;
-	}
-	/* for last BD set Wrap bit */
-	out_be32((u32*)bd, cpu_to_be32(R_W));
-	out_be32(&bd->buf, 0);
-
-	/* Set GUMR (For more details see the hardware spec.). */
-	/* gumr_h */
-	gumr = us_info->tcrc;
-	if (us_info->cdp)
-		gumr |= UCC_SLOW_GUMR_H_CDP;
-	if (us_info->ctsp)
-		gumr |= UCC_SLOW_GUMR_H_CTSP;
-	if (us_info->cds)
-		gumr |= UCC_SLOW_GUMR_H_CDS;
-	if (us_info->ctss)
-		gumr |= UCC_SLOW_GUMR_H_CTSS;
-	if (us_info->tfl)
-		gumr |= UCC_SLOW_GUMR_H_TFL;
-	if (us_info->rfw)
-		gumr |= UCC_SLOW_GUMR_H_RFW;
-	if (us_info->txsy)
-		gumr |= UCC_SLOW_GUMR_H_TXSY;
-	if (us_info->rtsm)
-		gumr |= UCC_SLOW_GUMR_H_RTSM;
-	out_be32(&us_regs->gumr_h, gumr);
-
-	/* gumr_l */
-	gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
-		us_info->diag | us_info->mode;
-	if (us_info->tci)
-		gumr |= UCC_SLOW_GUMR_L_TCI;
-	if (us_info->rinv)
-		gumr |= UCC_SLOW_GUMR_L_RINV;
-	if (us_info->tinv)
-		gumr |= UCC_SLOW_GUMR_L_TINV;
-	if (us_info->tend)
-		gumr |= UCC_SLOW_GUMR_L_TEND;
-	out_be32(&us_regs->gumr_l, gumr);
-
-	/* Function code registers */
-
-	/* if the data is in cachable memory, the 'global' */
-	/* in the function code should be set. */
-	uccs->us_pram->tbmr = UCC_BMR_BO_BE;
-	uccs->us_pram->rbmr = UCC_BMR_BO_BE;
-
-	/* rbase, tbase are offsets from MURAM base */
-	out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
-	out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
-
-	/* Mux clocking */
-	/* Grant Support */
-	ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
-	/* Breakpoint Support */
-	ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
-	/* Set Tsa or NMSI mode. */
-	ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
-	/* If NMSI (not Tsa), set Tx and Rx clock. */
-	if (!us_info->tsa) {
-		/* Rx clock routing */
-		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
-					COMM_DIR_RX)) {
-			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __func__);
-			ucc_slow_free(uccs);
-			return -EINVAL;
-		}
-		/* Tx clock routing */
-		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
-					COMM_DIR_TX)) {
-			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __func__);
-			ucc_slow_free(uccs);
-			return -EINVAL;
-		}
-	}
-
-	/* Set interrupt mask register at UCC level. */
-	out_be16(&us_regs->uccm, us_info->uccm_mask);
-
-	/* First, clear anything pending at UCC level,
-	 * otherwise, old garbage may come through
-	 * as soon as the dam is opened. */
-
-	/* Writing '1' clears */
-	out_be16(&us_regs->ucce, 0xffff);
-
-	/* Issue QE Init command */
-	if (us_info->init_tx && us_info->init_rx)
-		command = QE_INIT_TX_RX;
-	else if (us_info->init_tx)
-		command = QE_INIT_TX;
-	else
-		command = QE_INIT_RX;	/* We know at least one is TRUE */
-
-	qe_issue_cmd(command, id, us_info->protocol, 0);
-
-	*uccs_ret = uccs;
-	return 0;
-}
-EXPORT_SYMBOL(ucc_slow_init);
-
-void ucc_slow_free(struct ucc_slow_private * uccs)
-{
-	if (!uccs)
-		return;
-
-	if (uccs->rx_base_offset)
-		qe_muram_free(uccs->rx_base_offset);
-
-	if (uccs->tx_base_offset)
-		qe_muram_free(uccs->tx_base_offset);
-
-	if (uccs->us_pram)
-		qe_muram_free(uccs->us_pram_offset);
-
-	if (uccs->us_regs)
-		iounmap(uccs->us_regs);
-
-	kfree(uccs);
-}
-EXPORT_SYMBOL(ucc_slow_free);
-
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
deleted file mode 100644
index 27f23bd15eb6..000000000000
--- a/arch/powerpc/sysdev/qe_lib/usb.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * QE USB routines
- *
- * Copyright 2006 Freescale Semiconductor, Inc.
- *               Shlomi Gridish <gridish@freescale.com>
- *               Jerry Huang <Chang-Ming.Huang@freescale.com>
- * Copyright (c) MontaVista Software, Inc. 2008.
- *               Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/export.h>
-#include <linux/io.h>
-#include <asm/immap_qe.h>
-#include <asm/qe.h>
-
-int qe_usb_clock_set(enum qe_clock clk, int rate)
-{
-	struct qe_mux __iomem *mux = &qe_immr->qmx;
-	unsigned long flags;
-	u32 val;
-
-	switch (clk) {
-	case QE_CLK3:  val = QE_CMXGCR_USBCS_CLK3;  break;
-	case QE_CLK5:  val = QE_CMXGCR_USBCS_CLK5;  break;
-	case QE_CLK7:  val = QE_CMXGCR_USBCS_CLK7;  break;
-	case QE_CLK9:  val = QE_CMXGCR_USBCS_CLK9;  break;
-	case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
-	case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
-	case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
-	case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
-	case QE_BRG9:  val = QE_CMXGCR_USBCS_BRG9;  break;
-	case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
-	default:
-		pr_err("%s: requested unknown clock %d\n", __func__, clk);
-		return -EINVAL;
-	}
-
-	if (qe_clock_is_brg(clk))
-		qe_setbrg(clk, rate, 1);
-
-	spin_lock_irqsave(&cmxgcr_lock, flags);
-
-	clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
-
-	spin_unlock_irqrestore(&cmxgcr_lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/arch/powerpc/sysdev/simple_gpio.c b/arch/powerpc/sysdev/simple_gpio.c
index ff5e73230a36..56ce8ca3281b 100644
--- a/arch/powerpc/sysdev/simple_gpio.c
+++ b/arch/powerpc/sysdev/simple_gpio.c
@@ -46,7 +46,7 @@ static int u8_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 
-	return in_8(mm_gc->regs) & u8_pin2mask(gpio);
+	return !!(in_8(mm_gc->regs) & u8_pin2mask(gpio));
 }
 
 static void u8_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
diff --git a/arch/powerpc/sysdev/xics/icp-native.c b/arch/powerpc/sysdev/xics/icp-native.c
index eae32654bdf2..afdf62f2a695 100644
--- a/arch/powerpc/sysdev/xics/icp-native.c
+++ b/arch/powerpc/sysdev/xics/icp-native.c
@@ -159,6 +159,27 @@ static void icp_native_cause_ipi(int cpu, unsigned long data)
 	icp_native_set_qirr(cpu, IPI_PRIORITY);
 }
 
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+void icp_native_cause_ipi_rm(int cpu)
+{
+	/*
+	 * Currently not used to send IPIs to another CPU
+	 * on the same core. Only caller is KVM real mode.
+	 * Need the physical address of the XICS to be
+	 * previously saved in kvm_hstate in the paca.
+	 */
+	unsigned long xics_phys;
+
+	/*
+	 * Just like the cause_ipi functions, it is required to
+	 * include a full barrier (out8 includes a sync) before
+	 * causing the IPI.
+	 */
+	xics_phys = paca[cpu].kvm_hstate.xics_phys;
+	out_rm8((u8 *)(xics_phys + XICS_MFRR), IPI_PRIORITY);
+}
+#endif
+
 /*
  * Called when an interrupt is received on an off-line CPU to
  * clear the interrupt, so that the CPU can go back to nap mode.
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 1278788d96e3..436062dbb6e2 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -3,6 +3,7 @@
 subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
 
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 ccflags-$(CONFIG_PPC64) := $(NO_MINIMAL_TOC)
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 786bf01691c9..942796fa4767 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -47,6 +47,9 @@
 #include <asm/debug.h>
 #include <asm/hw_breakpoint.h>
 
+#include <asm/opal.h>
+#include <asm/firmware.h>
+
 #ifdef CONFIG_PPC64
 #include <asm/hvcall.h>
 #include <asm/paca.h>
@@ -119,6 +122,16 @@ static void dump(void);
 static void prdump(unsigned long, long);
 static int ppc_inst_dump(unsigned long, long, int);
 static void dump_log_buf(void);
+
+#ifdef CONFIG_PPC_POWERNV
+static void dump_opal_msglog(void);
+#else
+static inline void dump_opal_msglog(void)
+{
+	printf("Machine is not running OPAL firmware.\n");
+}
+#endif
+
 static void backtrace(struct pt_regs *);
 static void excprint(struct pt_regs *);
 static void prregs(struct pt_regs *);
@@ -150,6 +163,7 @@ static int  cpu_cmd(void);
 static void csum(void);
 static void bootcmds(void);
 static void proccall(void);
+static void show_tasks(void);
 void dump_segments(void);
 static void symbol_lookup(void);
 static void xmon_show_stack(unsigned long sp, unsigned long lr,
@@ -202,6 +216,10 @@ Commands:\n\
   df	dump float values\n\
   dd	dump double values\n\
   dl    dump the kernel log buffer\n"
+#ifdef CONFIG_PPC_POWERNV
+  "\
+  do    dump the OPAL message log\n"
+#endif
 #ifdef CONFIG_PPC64
   "\
   dp[#]	dump paca for current cpu, or cpu #\n\
@@ -221,6 +239,7 @@ Commands:\n\
   mz	zero a block of memory\n\
   mi	show information about memory allocation\n\
   p 	call a procedure\n\
+  P 	list processes/tasks\n\
   r	print registers\n\
   s	single step\n"
 #ifdef CONFIG_SPU_BASE
@@ -233,7 +252,7 @@ Commands:\n\
 "  S	print special registers\n\
   t	print backtrace\n\
   x	exit monitor and recover\n\
-  X	exit monitor and dont recover\n"
+  X	exit monitor and don't recover\n"
 #if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E)
 "  u	dump segment table or SLB\n"
 #elif defined(CONFIG_PPC_STD_MMU_32)
@@ -320,6 +339,7 @@ static inline void disable_surveillance(void)
 #ifdef CONFIG_PPC_PSERIES
 	/* Since this can't be a module, args should end up below 4GB. */
 	static struct rtas_args args;
+	int token;
 
 	/*
 	 * At this point we have got all the cpus we can into
@@ -328,17 +348,12 @@ static inline void disable_surveillance(void)
 	 * If we did try to take rtas.lock there would be a
 	 * real possibility of deadlock.
 	 */
-	args.token = rtas_token("set-indicator");
-	if (args.token == RTAS_UNKNOWN_SERVICE)
+	token = rtas_token("set-indicator");
+	if (token == RTAS_UNKNOWN_SERVICE)
 		return;
-	args.token = cpu_to_be32(args.token);
-	args.nargs = cpu_to_be32(3);
-	args.nret = cpu_to_be32(1);
-	args.rets = &args.args[3];
-	args.args[0] = cpu_to_be32(SURVEILLANCE_TOKEN);
-	args.args[1] = 0;
-	args.args[2] = 0;
-	enter_rtas(__pa(&args));
+
+	rtas_call_unlocked(&args, token, 3, 1, NULL, SURVEILLANCE_TOKEN, 0, 0);
+
 #endif /* CONFIG_PPC_PSERIES */
 }
 
@@ -954,6 +969,9 @@ cmds(struct pt_regs *excp)
 		case 'p':
 			proccall();
 			break;
+		case 'P':
+			show_tasks();
+			break;
 #ifdef CONFIG_PPC_STD_MMU
 		case 'u':
 			dump_segments();
@@ -1522,6 +1540,8 @@ static void excprint(struct pt_regs *fp)
 
 	if (trap == 0x700)
 		print_bug_trap(fp);
+
+	printf(linux_banner);
 }
 
 static void prregs(struct pt_regs *fp)
@@ -2255,6 +2275,8 @@ dump(void)
 		last_cmd = "di\n";
 	} else if (c == 'l') {
 		dump_log_buf();
+	} else if (c == 'o') {
+		dump_opal_msglog();
 	} else if (c == 'r') {
 		scanhex(&ndump);
 		if (ndump == 0)
@@ -2397,6 +2419,45 @@ dump_log_buf(void)
 	catch_memory_errors = 0;
 }
 
+#ifdef CONFIG_PPC_POWERNV
+static void dump_opal_msglog(void)
+{
+	unsigned char buf[128];
+	ssize_t res;
+	loff_t pos = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_OPAL)) {
+		printf("Machine is not running OPAL firmware.\n");
+		return;
+	}
+
+	if (setjmp(bus_error_jmp) != 0) {
+		printf("Error dumping OPAL msglog!\n");
+		return;
+	}
+
+	catch_memory_errors = 1;
+	sync();
+
+	xmon_start_pagination();
+	while ((res = opal_msglog_copy(buf, pos, sizeof(buf) - 1))) {
+		if (res < 0) {
+			printf("Error dumping OPAL msglog! Error: %zd\n", res);
+			break;
+		}
+		buf[res] = '\0';
+		printf("%s", buf);
+		pos += res;
+	}
+	xmon_end_pagination();
+
+	sync();
+	/* wait a little while to see if we get a machine check */
+	__delay(200);
+	catch_memory_errors = 0;
+}
+#endif
+
 /*
  * Memory operations - move, set, print differences
  */
@@ -2510,6 +2571,61 @@ memzcan(void)
 		printf("%.8x\n", a - mskip);
 }
 
+static void show_task(struct task_struct *tsk)
+{
+	char state;
+
+	/*
+	 * Cloned from kdb_task_state_char(), which is not entirely
+	 * appropriate for calling from xmon. This could be moved
+	 * to a common, generic, routine used by both.
+	 */
+	state = (tsk->state == 0) ? 'R' :
+		(tsk->state < 0) ? 'U' :
+		(tsk->state & TASK_UNINTERRUPTIBLE) ? 'D' :
+		(tsk->state & TASK_STOPPED) ? 'T' :
+		(tsk->state & TASK_TRACED) ? 'C' :
+		(tsk->exit_state & EXIT_ZOMBIE) ? 'Z' :
+		(tsk->exit_state & EXIT_DEAD) ? 'E' :
+		(tsk->state & TASK_INTERRUPTIBLE) ? 'S' : '?';
+
+	printf("%p %016lx %6d %6d %c %2d %s\n", tsk,
+		tsk->thread.ksp,
+		tsk->pid, tsk->parent->pid,
+		state, task_thread_info(tsk)->cpu,
+		tsk->comm);
+}
+
+static void show_tasks(void)
+{
+	unsigned long tskv;
+	struct task_struct *tsk = NULL;
+
+	printf("     task_struct     ->thread.ksp    PID   PPID S  P CMD\n");
+
+	if (scanhex(&tskv))
+		tsk = (struct task_struct *)tskv;
+
+	if (setjmp(bus_error_jmp) != 0) {
+		catch_memory_errors = 0;
+		printf("*** Error dumping task %p\n", tsk);
+		return;
+	}
+
+	catch_memory_errors = 1;
+	sync();
+
+	if (tsk)
+		show_task(tsk);
+	else
+		for_each_process(tsk)
+			show_task(tsk);
+
+	sync();
+	__delay(200);
+	catch_memory_errors = 0;
+}
+
 static void proccall(void)
 {
 	unsigned long args[8];
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 3a55f493c7da..aad23e3dff2c 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -10,9 +10,6 @@ config LOCKDEP_SUPPORT
 config STACKTRACE_SUPPORT
 	def_bool y
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 
@@ -62,10 +59,14 @@ config PCI_QUIRKS
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
+config DEBUG_RODATA
+	def_bool y
+
 config S390
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_SG_CHAIN
@@ -126,6 +127,7 @@ config S390
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_API_DEBUG
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_FTRACE_MCOUNT_RECORD
@@ -166,8 +168,7 @@ config SCHED_OMIT_FRAME_POINTER
 
 config PGTABLE_LEVELS
 	int
-	default 4 if 64BIT
-	default 2
+	default 4
 
 source "init/Kconfig"
 
@@ -257,12 +258,12 @@ config MARCH_ZEC12
 	  older machines.
 
 config MARCH_Z13
-	bool "IBM z13"
+	bool "IBM z13s and z13"
 	select HAVE_MARCH_Z13_FEATURES
 	help
-	  Select this to enable optimizations for IBM z13 (2964 series).
-	  The kernel will be slightly faster but will not work on older
-	  machines.
+	  Select this to enable optimizations for IBM z13s and z13 (2965 and
+	  2964 series). The kernel will be slightly faster but will not work on
+	  older machines.
 
 endchoice
 
@@ -390,9 +391,6 @@ config HOTPLUG_CPU
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
 
-config SCHED_SMT
-	def_bool n
-
 # Some NUMA nodes have memory ranges that span
 # other nodes.	Even though a pfn is valid and
 # between a node's start and end pfns, it may not
@@ -403,7 +401,7 @@ config NODES_SPAN_OTHER_NODES
 
 config NUMA
 	bool "NUMA support"
-	depends on SMP && 64BIT && SCHED_TOPOLOGY
+	depends on SMP && SCHED_TOPOLOGY
 	default n
 	help
 	  Enable NUMA support
@@ -463,6 +461,9 @@ config EMU_SIZE
 
 endmenu
 
+config SCHED_SMT
+	def_bool n
+
 config SCHED_MC
 	def_bool n
 
@@ -582,7 +583,6 @@ config QDIO
 
 menuconfig PCI
 	bool "PCI support"
-	select HAVE_DMA_ATTRS
 	select PCI_MSI
 	select IOMMU_SUPPORT
 	help
@@ -609,8 +609,6 @@ config PCI_NR_MSI
 	  PCI devices.
 
 source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-source "drivers/pci/hotplug/Kconfig"
 
 endif	# PCI
 
@@ -623,10 +621,6 @@ config HAS_IOMEM
 config IOMMU_HELPER
 	def_bool PCI
 
-config HAS_DMA
-	def_bool PCI
-	select HAVE_DMA_API_DEBUG
-
 config NEED_SG_DMA_LENGTH
 	def_bool PCI
 
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index c56878e1245f..26c5d5beb4be 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -5,18 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config STRICT_DEVMEM
-	def_bool y
-	prompt "Filter access to /dev/mem"
-	---help---
-	  This option restricts access to /dev/mem.  If this option is
-	  disabled, you allow userspace access to all memory, including
-	  kernel and userspace memory. Accidental memory access is likely
-	  to be disastrous.
-	  Memory access is required for experts who want to debug the kernel.
-
-	  If you are unsure, say Y.
-
 config S390_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index e8d4423e4f85..224b42734f0d 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -106,6 +106,7 @@ drivers-y	+= drivers/s390/
 drivers-$(CONFIG_OPROFILE)	+= arch/s390/oprofile/
 
 boot		:= arch/s390/boot
+tools		:= arch/s390/tools
 
 all: image bzImage
 
@@ -124,9 +125,17 @@ vdso_install:
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)$(MAKE) $(clean)=$(tools)
+
+archprepare:
+	$(Q)$(MAKE) $(build)=$(tools) include/generated/facilities.h
 
 # Don't use tabs in echo arguments
 define archhelp
   echo  '* image           - Kernel image for IPL ($(boot)/image)'
   echo	'* bzImage         - Compressed kernel image for IPL ($(boot)/bzImage)'
+  echo	'  install         - Install kernel using'
+  echo	'                    (your) ~/bin/$(INSTALLKERNEL) or'
+  echo	'                    (distribution) /sbin/$(INSTALLKERNEL) or'
+  echo	'                    install to $$(INSTALL_PATH)'
 endef
diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig
index ed7da281df66..0ac42cc4f880 100644
--- a/arch/s390/configs/default_defconfig
+++ b/arch/s390/configs/default_defconfig
@@ -10,28 +10,35 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_RCU_FAST_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_HUGETLB=y
 CONFIG_CGROUP_PERF=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_CGROUP=y
 CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
+CONFIG_STATIC_KEYS_SELFTEST=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -64,7 +71,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
 CONFIG_CHSC_SCH=y
 CONFIG_CRASH_DUMP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_HIBERNATION=y
 CONFIG_NET=y
@@ -106,7 +112,6 @@ CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
@@ -457,19 +462,9 @@ CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_MLX4_INFINIBAND=m
 CONFIG_VIRTIO_BALLOON=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_JBD_DEBUG=y
 CONFIG_JBD2_DEBUG=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
@@ -490,7 +485,7 @@ CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
+CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
@@ -542,10 +537,11 @@ CONFIG_DLM=m
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_READABLE_ASM=y
 CONFIG_UNUSED_SYMBOLS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_PAGEALLOC=y
 CONFIG_DEBUG_OBJECTS=y
@@ -588,6 +584,7 @@ CONFIG_FAILSLAB=y
 CONFIG_FAIL_PAGE_ALLOC=y
 CONFIG_FAIL_MAKE_REQUEST=y
 CONFIG_FAIL_IO_TIMEOUT=y
+CONFIG_FAIL_FUTEX=y
 CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LATENCYTOP=y
diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig
index 9858b14cde1e..a31dcd56f7c0 100644
--- a/arch/s390/configs/gcov_defconfig
+++ b/arch/s390/configs/gcov_defconfig
@@ -10,21 +10,27 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_RCU_FAST_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_HUGETLB=y
 CONFIG_CGROUP_PERF=y
 CONFIG_BLK_CGROUP=y
 CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
@@ -61,7 +67,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
 CONFIG_CHSC_SCH=y
 CONFIG_CRASH_DUMP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_HIBERNATION=y
 CONFIG_NET=y
@@ -103,7 +108,6 @@ CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
@@ -453,19 +457,9 @@ CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_MLX4_INFINIBAND=m
 CONFIG_VIRTIO_BALLOON=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_JBD_DEBUG=y
 CONFIG_JBD2_DEBUG=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
@@ -485,7 +479,7 @@ CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
+CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
@@ -550,6 +544,7 @@ CONFIG_NOTIFIER_ERROR_INJECTION=m
 CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
 CONFIG_PM_NOTIFIER_ERROR_INJECT=m
 CONFIG_LATENCYTOP=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_KPROBE_EVENT is not set
 CONFIG_LKDTM=m
@@ -557,6 +552,7 @@ CONFIG_RBTREE_TEST=m
 CONFIG_INTERVAL_TREE_TEST=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_BPF=m
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_S390_PTDUMP=y
 CONFIG_ENCRYPTED_KEYS=m
diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig
index 7f14f80717d4..7b73bf353345 100644
--- a/arch/s390/configs/performance_defconfig
+++ b/arch/s390/configs/performance_defconfig
@@ -10,22 +10,28 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_RCU_FAST_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
 # CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set
 CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_HUGETLB=y
 CONFIG_CGROUP_PERF=y
 CONFIG_BLK_CGROUP=y
 CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
@@ -61,7 +67,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
 CONFIG_CHSC_SCH=y
 CONFIG_CRASH_DUMP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_HIBERNATION=y
 CONFIG_NET=y
@@ -103,7 +108,6 @@ CONFIG_TCP_CONG_LP=m
 CONFIG_TCP_CONG_VENO=m
 CONFIG_TCP_CONG_YEAH=m
 CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_IPV6=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
@@ -453,19 +457,9 @@ CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_MLX4_INFINIBAND=m
 CONFIG_VIRTIO_BALLOON=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_JBD_DEBUG=y
 CONFIG_JBD2_DEBUG=y
 CONFIG_JFS_FS=m
 CONFIG_JFS_POSIX_ACL=y
@@ -485,7 +479,7 @@ CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QFMT_V1=m
 CONFIG_QFMT_V2=m
 CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
+CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
 CONFIG_FSCACHE=m
 CONFIG_CACHEFILES=m
@@ -546,6 +540,7 @@ CONFIG_TIMER_STATS=y
 CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_LATENCYTOP=y
+CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_SCHED_TRACER=y
 CONFIG_FTRACE_SYSCALLS=y
 CONFIG_STACK_TRACER=y
@@ -554,6 +549,7 @@ CONFIG_UPROBE_EVENT=y
 CONFIG_LKDTM=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_BPF=m
 # CONFIG_STRICT_DEVMEM is not set
 CONFIG_S390_PTDUMP=y
 CONFIG_ENCRYPTED_KEYS=m
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index 92805d604173..1719843a55a2 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -23,8 +23,6 @@ CONFIG_CRASH_DUMP=y
 # CONFIG_SECCOMP is not set
 CONFIG_NET=y
 # CONFIG_IUCV is not set
-CONFIG_ATM=y
-CONFIG_ATM_LANE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -54,14 +52,10 @@ CONFIG_RAW_DRIVER=y
 # CONFIG_S390_VMUR is not set
 # CONFIG_HID is not set
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
 CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index 0b9b95f3c703..48e1a2d3e318 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -27,6 +27,7 @@
 #include <linux/cpufeature.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
+#include <crypto/xts.h>
 #include "crypt_s390.h"
 
 #define AES_KEYLEN_128		1
@@ -587,6 +588,11 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 {
 	struct s390_xts_ctx *xts_ctx = crypto_tfm_ctx(tfm);
 	u32 *flags = &tfm->crt_flags;
+	int err;
+
+	err = xts_check_key(tfm, in_key, key_len);
+	if (err)
+		return err;
 
 	switch (key_len) {
 	case 32:
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index b8045b97f4fb..d750cc0dfe30 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -669,11 +669,13 @@ static const struct file_operations prng_tdes_fops = {
 static struct miscdevice prng_sha512_dev = {
 	.name	= "prandom",
 	.minor	= MISC_DYNAMIC_MINOR,
+	.mode	= 0644,
 	.fops	= &prng_sha512_fops,
 };
 static struct miscdevice prng_tdes_dev = {
 	.name	= "prandom",
 	.minor	= MISC_DYNAMIC_MINOR,
+	.mode	= 0644,
 	.fops	= &prng_tdes_fops,
 };
 
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 9256b48e7e43..e24f2af4c73b 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -11,22 +11,31 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CGROUP_PERF=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_CGROUP=y
 CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 CONFIG_BPF_SYSCALL=y
+CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
+CONFIG_STATIC_KEYS_SELFTEST=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
@@ -37,6 +46,7 @@ CONFIG_DEFAULT_DEADLINE=y
 CONFIG_LIVEPATCH=y
 CONFIG_MARCH_Z196=y
 CONFIG_NR_CPUS=256
+CONFIG_NUMA=y
 CONFIG_HZ_100=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
@@ -52,7 +62,6 @@ CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
 CONFIG_L2TP=m
 CONFIG_L2TP_DEBUGFS=m
 CONFIG_VLAN_8021Q=y
@@ -89,10 +98,26 @@ CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_ZFCP=y
 CONFIG_SCSI_VIRTIO=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
 CONFIG_NETDEVICES=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
@@ -137,7 +162,6 @@ CONFIG_DEBUG_PI_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_NOTIFIERS=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_CPU_STALL_INFO is not set
 CONFIG_RCU_TRACE=y
 CONFIG_LATENCYTOP=y
 CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index b2e5902bd8f4..255c7eec4481 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -67,7 +67,7 @@ static void hypfs_remove(struct dentry *dentry)
 	struct dentry *parent;
 
 	parent = dentry->d_parent;
-	mutex_lock(&d_inode(parent)->i_mutex);
+	inode_lock(d_inode(parent));
 	if (simple_positive(dentry)) {
 		if (d_is_dir(dentry))
 			simple_rmdir(d_inode(parent), dentry);
@@ -76,7 +76,7 @@ static void hypfs_remove(struct dentry *dentry)
 	}
 	d_delete(dentry);
 	dput(dentry);
-	mutex_unlock(&d_inode(parent)->i_mutex);
+	inode_unlock(d_inode(parent));
 }
 
 static void hypfs_delete_tree(struct dentry *root)
@@ -278,8 +278,8 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 	sbi->uid = current_uid();
 	sbi->gid = current_gid();
 	sb->s_fs_info = sbi;
-	sb->s_blocksize = PAGE_CACHE_SIZE;
-	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+	sb->s_blocksize = PAGE_SIZE;
+	sb->s_blocksize_bits = PAGE_SHIFT;
 	sb->s_magic = HYPFS_MAGIC;
 	sb->s_op = &hypfs_s_ops;
 	if (hypfs_parse_options(data, sb))
@@ -331,7 +331,7 @@ static struct dentry *hypfs_create_file(struct dentry *parent, const char *name,
 	struct dentry *dentry;
 	struct inode *inode;
 
-	mutex_lock(&d_inode(parent)->i_mutex);
+	inode_lock(d_inode(parent));
 	dentry = lookup_one_len(name, parent, strlen(name));
 	if (IS_ERR(dentry)) {
 		dentry = ERR_PTR(-ENOMEM);
@@ -359,7 +359,7 @@ static struct dentry *hypfs_create_file(struct dentry *parent, const char *name,
 	d_instantiate(dentry, inode);
 	dget(dentry);
 fail:
-	mutex_unlock(&d_inode(parent)->i_mutex);
+	inode_unlock(d_inode(parent));
 	return dentry;
 }
 
diff --git a/arch/s390/include/asm/barrier.h b/arch/s390/include/asm/barrier.h
index d68e11e0df5e..5c8db3ce61c8 100644
--- a/arch/s390/include/asm/barrier.h
+++ b/arch/s390/include/asm/barrier.h
@@ -26,26 +26,18 @@
 #define wmb()				barrier()
 #define dma_rmb()			mb()
 #define dma_wmb()			mb()
-#define smp_mb()			mb()
-#define smp_rmb()			rmb()
-#define smp_wmb()			wmb()
+#define __smp_mb()			mb()
+#define __smp_rmb()			rmb()
+#define __smp_wmb()			wmb()
 
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
-
-#define smp_mb__before_atomic()		smp_mb()
-#define smp_mb__after_atomic()		smp_mb()
-
-#define smp_store_mb(var, value)		do { WRITE_ONCE(var, value); mb(); } while (0)
-
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)					\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
 	barrier();							\
 	WRITE_ONCE(*p, v);						\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
 	typeof(*p) ___p1 = READ_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
@@ -53,4 +45,9 @@ do {									\
 	___p1;								\
 })
 
+#define __smp_mb__before_atomic()	barrier()
+#define __smp_mb__after_atomic()	barrier()
+
+#include <asm-generic/barrier.h>
+
 #endif /* __ASM_BARRIER_H */
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
index 4d7ccac5fd1d..22da3b34c655 100644
--- a/arch/s390/include/asm/cache.h
+++ b/arch/s390/include/asm/cache.h
@@ -15,4 +15,7 @@
 
 #define __read_mostly __attribute__((__section__(".data..read_mostly")))
 
+/* Read-only memory is marked before mark_rodata_ro() is called. */
+#define __ro_after_init __read_mostly
+
 #endif
diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h
index 740364856355..d7f100c53f07 100644
--- a/arch/s390/include/asm/checksum.h
+++ b/arch/s390/include/asm/checksum.h
@@ -91,8 +91,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
  * returns a 32-bit checksum
  */
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-                   unsigned short len, unsigned short proto,
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, __u8 proto,
                    __wsum sum)
 {
 	__u32 csum = (__force __u32)sum;
@@ -118,8 +117,7 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  */
 
 static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-                  unsigned short len, unsigned short proto,
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len, __u8 proto,
                   __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index 0c5d8ee657f0..d1e7b0a0feeb 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -312,6 +312,7 @@ extern void css_schedule_reprobe(void);
 extern void reipl_ccw_dev(struct ccw_dev_id *id);
 
 struct cio_iplinfo {
+	u8 ssid;
 	u16 devno;
 	int is_qdio;
 };
diff --git a/arch/s390/include/asm/clp.h b/arch/s390/include/asm/clp.h
index a0e71a501f7c..5687d62fb0cb 100644
--- a/arch/s390/include/asm/clp.h
+++ b/arch/s390/include/asm/clp.h
@@ -4,14 +4,23 @@
 /* CLP common request & response block size */
 #define CLP_BLK_SIZE			PAGE_SIZE
 
+#define CLP_LPS_BASE	0
+#define CLP_LPS_PCI	2
+
 struct clp_req_hdr {
 	u16 len;
 	u16 cmd;
+	u32 fmt		: 4;
+	u32 reserved1	: 28;
+	u64 reserved2;
 } __packed;
 
 struct clp_rsp_hdr {
 	u16 len;
 	u16 rsp;
+	u32 fmt		: 4;
+	u32 reserved1	: 28;
+	u64 reserved2;
 } __packed;
 
 /* CLP Response Codes */
@@ -25,4 +34,22 @@ struct clp_rsp_hdr {
 #define CLP_RC_NODATA			0x0080	/* No data available */
 #define CLP_RC_FC_UNKNOWN		0x0100	/* Function code not recognized */
 
+/* Store logical-processor characteristics request */
+struct clp_req_slpc {
+	struct clp_req_hdr hdr;
+} __packed;
+
+struct clp_rsp_slpc {
+	struct clp_rsp_hdr hdr;
+	u32 reserved2[4];
+	u32 lpif[8];
+	u32 reserved3[8];
+	u32 lpic[8];
+} __packed;
+
+struct clp_req_rsp_slpc {
+	struct clp_req_slpc request;
+	struct clp_rsp_slpc response;
+} __packed;
+
 #endif
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index d350ed9d0fbb..352f7bdaf11f 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -284,7 +284,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 
 static inline int is_compat_task(void)
 {
-	return is_32bit_task();
+	return test_thread_flag(TIF_31BIT);
 }
 
 static inline void __user *arch_compat_alloc_user_space(long len)
diff --git a/arch/s390/include/asm/crw.h b/arch/s390/include/asm/crw.h
index 7c31d3e25cd1..bcb9cd2a730a 100644
--- a/arch/s390/include/asm/crw.h
+++ b/arch/s390/include/asm/crw.h
@@ -52,18 +52,4 @@ void crw_wait_for_channel_report(void);
 #define CRW_ERC_PERRI	 0x07 /* perm. error, facility init */
 #define CRW_ERC_PMOD	 0x08 /* installed parameters modified */
 
-static inline int stcrw(struct crw *pcrw)
-{
-	int ccode;
-
-	asm volatile(
-		"	stcrw	0(%2)\n"
-		"	ipm	%0\n"
-		"	srl	%0,28\n"
-		: "=d" (ccode), "=m" (*pcrw)
-		: "a" (pcrw)
-		: "cc" );
-	return ccode;
-}
-
 #endif /* _ASM_S390_CRW_H */
diff --git a/arch/s390/include/asm/device.h b/arch/s390/include/asm/device.h
index d8f9872b0e2d..4a9f35e0973f 100644
--- a/arch/s390/include/asm/device.h
+++ b/arch/s390/include/asm/device.h
@@ -3,5 +3,9 @@
  *
  * This file is released under the GPLv2
  */
-#include <asm-generic/device.h>
+struct dev_archdata {
+	struct dma_map_ops *dma_ops;
+};
 
+struct pdev_archdata {
+};
diff --git a/arch/s390/include/asm/dma-mapping.h b/arch/s390/include/asm/dma-mapping.h
index b3fd54d93dd2..3249b7464889 100644
--- a/arch/s390/include/asm/dma-mapping.h
+++ b/arch/s390/include/asm/dma-mapping.h
@@ -11,11 +11,13 @@
 
 #define DMA_ERROR_CODE		(~(dma_addr_t) 0x0)
 
-extern struct dma_map_ops s390_dma_ops;
+extern struct dma_map_ops s390_pci_dma_ops;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	return &s390_dma_ops;
+	if (dev && dev->archdata.dma_ops)
+		return dev->archdata.dma_ops;
+	return &dma_noop_ops;
 }
 
 static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
@@ -23,8 +25,6 @@ static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
 	if (!dev->dma_mask)
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 3ad48f22de78..563ab9f44874 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -104,6 +104,9 @@
 #define HWCAP_S390_TE		1024
 #define HWCAP_S390_VXRS		2048
 
+/* Internal bits, not exposed via elf */
+#define HWCAP_INT_SIE		1UL
+
 /*
  * These are used to set parameters in the core dumps.
  */
@@ -126,6 +129,7 @@ typedef s390_regs elf_gregset_t;
 typedef s390_fp_regs compat_elf_fpregset_t;
 typedef s390_compat_regs compat_elf_gregset_t;
 
+#include <linux/compat.h>
 #include <linux/sched.h>	/* for task_struct */
 #include <asm/mmu_context.h>
 
@@ -159,7 +163,7 @@ extern unsigned int vdso_enabled;
    the loader.  We need to make sure that it is out of the way of the program
    that it will "exec", and that there is sufficient room for the brk. 64-bit
    tasks are aligned to 4GB. */
-#define ELF_ET_DYN_BASE (is_32bit_task() ? \
+#define ELF_ET_DYN_BASE (is_compat_task() ? \
 				(STACK_TOP / 3 * 2) : \
 				(STACK_TOP / 3 * 2) & ~((1UL << 32) - 1))
 
@@ -169,6 +173,10 @@ extern unsigned int vdso_enabled;
 extern unsigned long elf_hwcap;
 #define ELF_HWCAP (elf_hwcap)
 
+/* Internal hardware capabilities, not exposed via elf */
+
+extern unsigned long int_hwcap;
+
 /* This yields a string that ld.so will use to load implementation
    specific libraries for optimization.  This is more specific in
    intent than poking at uname or /proc/cpuinfo.
@@ -206,9 +214,16 @@ do {								\
 } while (0)
 #endif /* CONFIG_COMPAT */
 
-extern unsigned long mmap_rnd_mask;
-
-#define STACK_RND_MASK	(test_thread_flag(TIF_31BIT) ? 0x7ff : mmap_rnd_mask)
+/*
+ * Cache aliasing on the latest machines calls for a mapping granularity
+ * of 512KB. For 64-bit processes use a 512KB alignment and a randomization
+ * of up to 1GB. For 31-bit processes the virtual address space is limited,
+ * use no alignment and limit the randomization to 8MB.
+ */
+#define BRK_RND_MASK	(is_compat_task() ? 0x7ffUL : 0x3ffffUL)
+#define MMAP_RND_MASK	(is_compat_task() ? 0x7ffUL : 0x3ff80UL)
+#define MMAP_ALIGN_MASK	(is_compat_task() ? 0 : 0x7fUL)
+#define STACK_RND_MASK	MMAP_RND_MASK
 
 #define ARCH_DLINFO							    \
 do {									    \
@@ -222,6 +237,4 @@ struct linux_binprm;
 #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
 int arch_setup_additional_pages(struct linux_binprm *, int);
 
-void *fill_cpu_elf_notes(void *ptr, struct save_area *sa, __vector128 *vxrs);
-
 #endif
diff --git a/arch/s390/include/asm/facilities_src.h b/arch/s390/include/asm/facilities_src.h
new file mode 100644
index 000000000000..4917728e5828
--- /dev/null
+++ b/arch/s390/include/asm/facilities_src.h
@@ -0,0 +1,58 @@
+/*
+ *    Copyright IBM Corp. 2015
+ */
+
+#ifndef S390_GEN_FACILITIES_C
+#error "This file can only be included by gen_facilities.c"
+#endif
+
+#include <linux/kconfig.h>
+
+struct facility_def {
+	char *name;
+	int *bits;
+};
+
+static struct facility_def facility_defs[] = {
+	{
+		/*
+		 * FACILITIES_ALS contains the list of facilities that are
+		 * required to run a kernel that is compiled e.g. with
+		 * -march=<machine>.
+		 */
+		.name = "FACILITIES_ALS",
+		.bits = (int[]){
+#ifdef CONFIG_HAVE_MARCH_Z900_FEATURES
+			0,  /* N3 instructions */
+			1,  /* z/Arch mode installed */
+#endif
+#ifdef CONFIG_HAVE_MARCH_Z990_FEATURES
+			18, /* long displacement facility */
+#endif
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+			7,  /* stfle */
+			17, /* message security assist */
+			21, /* extended-immediate facility */
+			25, /* store clock fast */
+#endif
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+			27, /* mvcos */
+			32, /* compare and swap and store */
+			33, /* compare and swap and store 2 */
+			34, /* general extension facility */
+			35, /* execute extensions */
+#endif
+#ifdef CONFIG_HAVE_MARCH_Z196_FEATURES
+			45, /* fast-BCR, etc. */
+#endif
+#ifdef CONFIG_HAVE_MARCH_ZEC12_FEATURES
+			49, /* misc-instruction-extensions */
+			52, /* interlocked facility 2 */
+#endif
+#ifdef CONFIG_HAVE_MARCH_Z13_FEATURES
+			53, /* load-and-zero-rightmost-byte, etc. */
+#endif
+			-1 /* END */
+		}
+	},
+};
diff --git a/arch/s390/include/asm/facility.h b/arch/s390/include/asm/facility.h
index 0aa6a7ed95a3..09b406db7529 100644
--- a/arch/s390/include/asm/facility.h
+++ b/arch/s390/include/asm/facility.h
@@ -7,6 +7,10 @@
 #ifndef __ASM_FACILITY_H
 #define __ASM_FACILITY_H
 
+#include <generated/facilities.h>
+
+#ifndef __ASSEMBLY__
+
 #include <linux/string.h>
 #include <linux/preempt.h>
 #include <asm/lowcore.h>
@@ -30,6 +34,12 @@ static inline int __test_facility(unsigned long nr, void *facilities)
  */
 static inline int test_facility(unsigned long nr)
 {
+	unsigned long facilities_als[] = { FACILITIES_ALS };
+
+	if (__builtin_constant_p(nr) && nr < sizeof(facilities_als) * 8) {
+		if (__test_facility(nr, &facilities_als))
+			return 1;
+	}
 	return __test_facility(nr, &S390_lowcore.stfle_fac_list);
 }
 
@@ -44,10 +54,8 @@ static inline void stfle(u64 *stfle_fac_list, int size)
 
 	preempt_disable();
 	asm volatile(
-		"	.insn s,0xb2b10000,0(0)\n" /* stfl */
-		"0:\n"
-		EX_TABLE(0b, 0b)
-		: "+m" (S390_lowcore.stfl_fac_list));
+		"	stfl	0(0)\n"
+		: "=m" (S390_lowcore.stfl_fac_list));
 	nr = 4; /* bytes stored by stfl */
 	memcpy(stfle_fac_list, &S390_lowcore.stfl_fac_list, 4);
 	if (S390_lowcore.stfl_fac_list & 0x01000000) {
@@ -64,4 +72,5 @@ static inline void stfle(u64 *stfle_fac_list, int size)
 	preempt_enable();
 }
 
+#endif /* __ASSEMBLY__ */
 #endif /* __ASM_FACILITY_H */
diff --git a/arch/s390/include/asm/fpu/internal.h b/arch/s390/include/asm/fpu/internal.h
index 2559b16da525..629c90865a07 100644
--- a/arch/s390/include/asm/fpu/internal.h
+++ b/arch/s390/include/asm/fpu/internal.h
@@ -12,21 +12,13 @@
 #include <asm/ctl_reg.h>
 #include <asm/fpu/types.h>
 
-static inline void save_vx_regs_safe(__vector128 *vxrs)
+static inline void save_vx_regs(__vector128 *vxrs)
 {
-	unsigned long cr0, flags;
-
-	flags = arch_local_irq_save();
-	__ctl_store(cr0, 0, 0);
-	__ctl_set_bit(0, 17);
-	__ctl_set_bit(0, 18);
 	asm volatile(
 		"	la	1,%0\n"
 		"	.word	0xe70f,0x1000,0x003e\n"	/* vstm 0,15,0(1) */
 		"	.word	0xe70f,0x1100,0x0c3e\n"	/* vstm 16,31,256(1) */
 		: "=Q" (*(struct vx_array *) vxrs) : : "1");
-	__ctl_load(cr0, 0, 0);
-	arch_local_irq_restore(flags);
 }
 
 static inline void convert_vx_to_fp(freg_t *fprs, __vector128 *vxrs)
@@ -48,6 +40,7 @@ static inline void convert_fp_to_vx(__vector128 *vxrs, freg_t *fprs)
 static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu)
 {
 	fpregs->pad = 0;
+	fpregs->fpc = fpu->fpc;
 	if (MACHINE_HAS_VX)
 		convert_vx_to_fp((freg_t *)&fpregs->fprs, fpu->vxrs);
 	else
@@ -57,6 +50,7 @@ static inline void fpregs_store(_s390_fp_regs *fpregs, struct fpu *fpu)
 
 static inline void fpregs_load(_s390_fp_regs *fpregs, struct fpu *fpu)
 {
+	fpu->fpc = fpregs->fpc;
 	if (MACHINE_HAS_VX)
 		convert_fp_to_vx(fpu->vxrs, (freg_t *)&fpregs->fprs);
 	else
diff --git a/arch/s390/include/asm/gmap.h b/arch/s390/include/asm/gmap.h
new file mode 100644
index 000000000000..d054c1b07a3c
--- /dev/null
+++ b/arch/s390/include/asm/gmap.h
@@ -0,0 +1,64 @@
+/*
+ *  KVM guest address space mapping code
+ *
+ *    Copyright IBM Corp. 2007, 2016
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_GMAP_H
+#define _ASM_S390_GMAP_H
+
+/**
+ * struct gmap_struct - guest address space
+ * @crst_list: list of all crst tables used in the guest address space
+ * @mm: pointer to the parent mm_struct
+ * @guest_to_host: radix tree with guest to host address translation
+ * @host_to_guest: radix tree with pointer to segment table entries
+ * @guest_table_lock: spinlock to protect all entries in the guest page table
+ * @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
+ * @pfault_enabled: defines if pfaults are applicable for the guest
+ */
+struct gmap {
+	struct list_head list;
+	struct list_head crst_list;
+	struct mm_struct *mm;
+	struct radix_tree_root guest_to_host;
+	struct radix_tree_root host_to_guest;
+	spinlock_t guest_table_lock;
+	unsigned long *table;
+	unsigned long asce;
+	unsigned long asce_end;
+	void *private;
+	bool pfault_enabled;
+};
+
+/**
+ * struct gmap_notifier - notify function block for page invalidation
+ * @notifier_call: address of callback function
+ */
+struct gmap_notifier {
+	struct list_head list;
+	void (*notifier_call)(struct gmap *gmap, unsigned long gaddr);
+};
+
+struct gmap *gmap_alloc(struct mm_struct *mm, unsigned long limit);
+void gmap_free(struct gmap *gmap);
+void gmap_enable(struct gmap *gmap);
+void gmap_disable(struct gmap *gmap);
+int gmap_map_segment(struct gmap *gmap, unsigned long from,
+		     unsigned long to, unsigned long len);
+int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len);
+unsigned long __gmap_translate(struct gmap *, unsigned long gaddr);
+unsigned long gmap_translate(struct gmap *, unsigned long gaddr);
+int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr);
+int gmap_fault(struct gmap *, unsigned long gaddr, unsigned int fault_flags);
+void gmap_discard(struct gmap *, unsigned long from, unsigned long to);
+void __gmap_zap(struct gmap *, unsigned long gaddr);
+void gmap_unlink(struct mm_struct *, unsigned long *table, unsigned long vmaddr);
+
+void gmap_register_ipte_notifier(struct gmap_notifier *);
+void gmap_unregister_ipte_notifier(struct gmap_notifier *);
+int gmap_ipte_notify(struct gmap *, unsigned long start, unsigned long len);
+
+#endif /* _ASM_S390_GMAP_H */
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 39ae6a359747..6fc44dca193e 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -64,7 +64,8 @@ struct ipl_block_fcp {
 
 struct ipl_block_ccw {
 	u8  reserved1[84];
-	u8  reserved2[2];
+	u16 reserved2 : 13;
+	u8  ssid : 3;
 	u16 devno;
 	u8  vm_flags;
 	u8  reserved3[3];
@@ -86,14 +87,12 @@ struct ipl_parameter_block {
  * IPL validity flags
  */
 extern u32 ipl_flags;
-extern u32 dump_prefix_page;
 
-struct dump_save_areas {
-	struct save_area_ext **areas;
-	int count;
-};
-
-extern struct dump_save_areas dump_save_areas;
+struct save_area;
+struct save_area * __init save_area_alloc(bool is_boot_cpu);
+struct save_area * __init save_area_boot_cpu(void);
+void __init save_area_add_regs(struct save_area *, void *regs);
+void __init save_area_add_vxrs(struct save_area *, __vector128 *vxrs);
 
 extern void do_reipl(void);
 extern void do_halt(void);
@@ -175,7 +174,7 @@ enum diag308_rc {
 
 extern int diag308(unsigned long subcode, void *addr);
 extern void diag308_reset(void);
-extern void store_status(void);
+extern void store_status(void (*fn)(void *), void *data);
 extern void lgr_info_log(void);
 
 #endif /* _ASM_S390_IPL_H */
diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h
index 16aa0c779e07..595a275c36f8 100644
--- a/arch/s390/include/asm/irqflags.h
+++ b/arch/s390/include/asm/irqflags.h
@@ -8,6 +8,8 @@
 
 #include <linux/types.h>
 
+#define ARCH_IRQ_ENABLED	(3UL << (BITS_PER_LONG - 8))
+
 /* store then OR system mask. */
 #define __arch_local_irq_stosm(__or)					\
 ({									\
@@ -54,14 +56,17 @@ static inline notrace void arch_local_irq_enable(void)
 	__arch_local_irq_stosm(0x03);
 }
 
+/* This only restores external and I/O interrupt state */
 static inline notrace void arch_local_irq_restore(unsigned long flags)
 {
-	__arch_local_irq_ssm(flags);
+	/* only disabled->disabled and disabled->enabled is valid */
+	if (flags & ARCH_IRQ_ENABLED)
+		arch_local_irq_enable();
 }
 
 static inline notrace bool arch_irqs_disabled_flags(unsigned long flags)
 {
-	return !(flags & (3UL << (BITS_PER_LONG - 8)));
+	return !(flags & ARCH_IRQ_ENABLED);
 }
 
 static inline notrace bool arch_irqs_disabled(void)
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index efaac2c3bb77..6da41fab70fb 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -20,12 +20,15 @@
 #include <linux/kvm_types.h>
 #include <linux/kvm_host.h>
 #include <linux/kvm.h>
+#include <linux/seqlock.h>
 #include <asm/debug.h>
 #include <asm/cpu.h>
 #include <asm/fpu/api.h>
 #include <asm/isc.h>
 
-#define KVM_MAX_VCPUS 64
+#define KVM_S390_BSCA_CPU_SLOTS 64
+#define KVM_S390_ESCA_CPU_SLOTS 248
+#define KVM_MAX_VCPUS KVM_S390_ESCA_CPU_SLOTS
 #define KVM_USER_MEM_SLOTS 32
 
 /*
@@ -37,12 +40,41 @@
 #define KVM_IRQCHIP_NUM_PINS 4096
 #define KVM_HALT_POLL_NS_DEFAULT 0
 
+/* s390-specific vcpu->requests bit members */
+#define KVM_REQ_ENABLE_IBS         8
+#define KVM_REQ_DISABLE_IBS        9
+
 #define SIGP_CTRL_C		0x80
 #define SIGP_CTRL_SCN_MASK	0x3f
 
-struct sca_entry {
+union bsca_sigp_ctrl {
+	__u8 value;
+	struct {
+		__u8 c : 1;
+		__u8 r : 1;
+		__u8 scn : 6;
+	};
+} __packed;
+
+union esca_sigp_ctrl {
+	__u16 value;
+	struct {
+		__u8 c : 1;
+		__u8 reserved: 7;
+		__u8 scn;
+	};
+} __packed;
+
+struct esca_entry {
+	union esca_sigp_ctrl sigp_ctrl;
+	__u16   reserved1[3];
+	__u64   sda;
+	__u64   reserved2[6];
+} __packed;
+
+struct bsca_entry {
 	__u8	reserved0;
-	__u8	sigp_ctrl;
+	union bsca_sigp_ctrl	sigp_ctrl;
 	__u16	reserved[3];
 	__u64	sda;
 	__u64	reserved2[2];
@@ -57,14 +89,22 @@ union ipte_control {
 	};
 };
 
-struct sca_block {
+struct bsca_block {
 	union ipte_control ipte_control;
 	__u64	reserved[5];
 	__u64	mcn;
 	__u64	reserved2;
-	struct sca_entry cpu[64];
+	struct bsca_entry cpu[KVM_S390_BSCA_CPU_SLOTS];
 } __attribute__((packed));
 
+struct esca_block {
+	union ipte_control ipte_control;
+	__u64   reserved1[7];
+	__u64   mcn[4];
+	__u64   reserved2[20];
+	struct esca_entry cpu[KVM_S390_ESCA_CPU_SLOTS];
+} __packed;
+
 #define CPUSTAT_STOPPED    0x80000000
 #define CPUSTAT_WAIT       0x10000000
 #define CPUSTAT_ECALL_PEND 0x08000000
@@ -182,24 +222,19 @@ struct kvm_s390_sie_block {
 	__u64	pp;			/* 0x01de */
 	__u8	reserved1e6[2];		/* 0x01e6 */
 	__u64	itdba;			/* 0x01e8 */
-	__u8	reserved1f0[16];	/* 0x01f0 */
+	__u64   riccbd;			/* 0x01f0 */
+	__u8    reserved1f8[8];		/* 0x01f8 */
 } __attribute__((packed));
 
 struct kvm_s390_itdb {
 	__u8	data[256];
 } __packed;
 
-struct kvm_s390_vregs {
-	__vector128 vrs[32];
-	__u8	reserved200[512];	/* for future vector expansion */
-} __packed;
-
 struct sie_page {
 	struct kvm_s390_sie_block sie_block;
 	__u8 reserved200[1024];		/* 0x0200 */
 	struct kvm_s390_itdb itdb;	/* 0x0600 */
-	__u8 reserved700[1280];		/* 0x0700 */
-	struct kvm_s390_vregs vregs;	/* 0x0c00 */
+	__u8 reserved700[2304];		/* 0x0700 */
 } __packed;
 
 struct kvm_vcpu_stat {
@@ -427,7 +462,7 @@ struct kvm_s390_irq_payload {
 struct kvm_s390_local_interrupt {
 	spinlock_t lock;
 	struct kvm_s390_float_interrupt *float_int;
-	wait_queue_head_t *wq;
+	struct swait_queue_head *wq;
 	atomic_t *cpuflags;
 	DECLARE_BITMAP(sigp_emerg_pending, KVM_MAX_VCPUS);
 	struct kvm_s390_irq_payload irq;
@@ -506,7 +541,6 @@ struct kvm_vcpu_arch {
 	struct kvm_s390_sie_block *sie_block;
 	unsigned int      host_acrs[NUM_ACRS];
 	struct fpu	  host_fpregs;
-	struct fpu	  guest_fpregs;
 	struct kvm_s390_local_interrupt local_int;
 	struct hrtimer    ckc_timer;
 	struct kvm_s390_pgm_info pgm;
@@ -519,6 +553,15 @@ struct kvm_vcpu_arch {
 	unsigned long pfault_token;
 	unsigned long pfault_select;
 	unsigned long pfault_compare;
+	bool cputm_enabled;
+	/*
+	 * The seqcount protects updates to cputm_start and sie_block.cputm,
+	 * this way we can have non-blocking reads with consistent values.
+	 * Only the owning VCPU thread (vcpu->cpu) is allowed to change these
+	 * values and to start/stop/enable/disable cpu timer accounting.
+	 */
+	seqcount_t cputm_seqcount;
+	__u64 cputm_start;
 };
 
 struct kvm_vm_stat {
@@ -557,15 +600,11 @@ struct s390_io_adapter {
 #define S390_ARCH_FAC_MASK_SIZE_U64 \
 	(S390_ARCH_FAC_MASK_SIZE_BYTE / sizeof(u64))
 
-struct kvm_s390_fac {
-	/* facility list requested by guest */
-	__u64 list[S390_ARCH_FAC_LIST_SIZE_U64];
-	/* facility mask supported by kvm & hosting machine */
-	__u64 mask[S390_ARCH_FAC_LIST_SIZE_U64];
-};
-
 struct kvm_s390_cpu_model {
-	struct kvm_s390_fac *fac;
+	/* facility mask supported by kvm & hosting machine */
+	__u64 fac_mask[S390_ARCH_FAC_LIST_SIZE_U64];
+	/* facility list requested by guest (in dma page) */
+	__u64 *fac_list;
 	struct cpuid cpu_id;
 	unsigned short ibc;
 };
@@ -584,12 +623,25 @@ struct kvm_s390_crypto_cb {
 	__u8    reserved80[128];                /* 0x0080 */
 };
 
+/*
+ * sie_page2 has to be allocated as DMA because fac_list and crycb need
+ * 31bit addresses in the sie control block.
+ */
+struct sie_page2 {
+	__u64 fac_list[S390_ARCH_FAC_LIST_SIZE_U64];	/* 0x0000 */
+	struct kvm_s390_crypto_cb crycb;		/* 0x0800 */
+	u8 reserved900[0x1000 - 0x900];			/* 0x0900 */
+} __packed;
+
 struct kvm_arch{
-	struct sca_block *sca;
+	void *sca;
+	int use_esca;
+	rwlock_t sca_lock;
 	debug_info_t *dbf;
 	struct kvm_s390_float_interrupt float_int;
 	struct kvm_device *flic;
 	struct gmap *gmap;
+	unsigned long mem_limit;
 	int css_support;
 	int use_irqchip;
 	int use_cmma;
@@ -601,6 +653,7 @@ struct kvm_arch{
 	int ipte_lock_count;
 	struct mutex ipte_mutex;
 	spinlock_t start_stop_lock;
+	struct sie_page2 *sie_page2;
 	struct kvm_s390_cpu_model model;
 	struct kvm_s390_crypto crypto;
 	u64 epoch;
diff --git a/arch/s390/include/asm/livepatch.h b/arch/s390/include/asm/livepatch.h
index 7aa799134a11..d5427c78b1b3 100644
--- a/arch/s390/include/asm/livepatch.h
+++ b/arch/s390/include/asm/livepatch.h
@@ -19,7 +19,6 @@
 
 #include <linux/module.h>
 
-#ifdef CONFIG_LIVEPATCH
 static inline int klp_check_compiler_support(void)
 {
 	return 0;
@@ -36,8 +35,5 @@ static inline void klp_arch_set_pc(struct pt_regs *regs, unsigned long ip)
 {
 	regs->psw.addr = ip;
 }
-#else
-#error Live patching support is disabled; check CONFIG_LIVEPATCH
-#endif
 
 #endif
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index afe1cfebf1a4..d79ba7cf75b0 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -16,28 +16,7 @@
 #define LC_ORDER 1
 #define LC_PAGES 2
 
-struct save_area {
-	u64	fp_regs[16];
-	u64	gp_regs[16];
-	u8	psw[16];
-	u8	pad1[8];
-	u32	pref_reg;
-	u32	fp_ctrl_reg;
-	u8	pad2[4];
-	u32	tod_reg;
-	u64	timer;
-	u64	clk_cmp;
-	u8	pad3[8];
-	u32	acc_regs[16];
-	u64	ctrl_regs[16];
-} __packed;
-
-struct save_area_ext {
-	struct save_area	sa;
-	__vector128		vx_regs[32];
-};
-
-struct _lowcore {
+struct lowcore {
 	__u8	pad_0x0000[0x0014-0x0000];	/* 0x0000 */
 	__u32	ipl_parmblock_ptr;		/* 0x0014 */
 	__u8	pad_0x0018[0x0080-0x0018];	/* 0x0018 */
@@ -204,9 +183,9 @@ struct _lowcore {
 	__u8	vector_save_area[1024];		/* 0x1c00 */
 } __packed;
 
-#define S390_lowcore (*((struct _lowcore *) 0))
+#define S390_lowcore (*((struct lowcore *) 0))
 
-extern struct _lowcore *lowcore_ptr[];
+extern struct lowcore *lowcore_ptr[];
 
 static inline void set_prefix(__u32 address)
 {
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index fb1b93ea3e3f..d321469eeda7 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -15,17 +15,25 @@
 static inline int init_new_context(struct task_struct *tsk,
 				   struct mm_struct *mm)
 {
+	spin_lock_init(&mm->context.list_lock);
+	INIT_LIST_HEAD(&mm->context.pgtable_list);
+	INIT_LIST_HEAD(&mm->context.gmap_list);
 	cpumask_clear(&mm->context.cpu_attach_mask);
 	atomic_set(&mm->context.attach_count, 0);
 	mm->context.flush_mm = 0;
-	mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
-	mm->context.asce_bits |= _ASCE_TYPE_REGION3;
 #ifdef CONFIG_PGSTE
 	mm->context.alloc_pgste = page_table_allocate_pgste;
 	mm->context.has_pgste = 0;
 	mm->context.use_skey = 0;
 #endif
-	mm->context.asce_limit = STACK_TOP_MAX;
+	if (mm->context.asce_limit == 0) {
+		/* context created by exec, set asce limit to 4TB */
+		mm->context.asce_bits = _ASCE_TABLE_LENGTH |
+			_ASCE_USER_BITS | _ASCE_TYPE_REGION3;
+		mm->context.asce_limit = STACK_TOP_MAX;
+	} else if (mm->context.asce_limit == (1UL << 31)) {
+		mm_inc_nr_pmds(mm);
+	}
 	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
 	return 0;
 }
@@ -111,8 +119,6 @@ static inline void activate_mm(struct mm_struct *prev,
 static inline void arch_dup_mmap(struct mm_struct *oldmm,
 				 struct mm_struct *mm)
 {
-	if (oldmm->context.asce_limit < mm->context.asce_limit)
-		crst_table_downgrade(mm, oldmm->context.asce_limit);
 }
 
 static inline void arch_exit_mmap(struct mm_struct *mm)
@@ -130,4 +136,16 @@ static inline void arch_bprm_mm_init(struct mm_struct *mm,
 {
 }
 
+static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
+		bool write, bool execute, bool foreign)
+{
+	/* by default, allow everything */
+	return true;
+}
+
+static inline bool arch_pte_access_permitted(pte_t pte, bool write)
+{
+	/* by default, allow everything */
+	return true;
+}
 #endif /* __S390_MMU_CONTEXT_H */
diff --git a/arch/s390/include/asm/os_info.h b/arch/s390/include/asm/os_info.h
index 295f2c4f1c96..943475382d51 100644
--- a/arch/s390/include/asm/os_info.h
+++ b/arch/s390/include/asm/os_info.h
@@ -38,7 +38,7 @@ u32 os_info_csum(struct os_info *os_info);
 
 #ifdef CONFIG_CRASH_DUMP
 void *os_info_old_entry(int nr, unsigned long *size);
-int copy_from_oldmem(void *dest, void *src, size_t count);
+int copy_oldmem_kernel(void *dst, void *src, size_t count);
 #else
 static inline void *os_info_old_entry(int nr, unsigned long *size)
 {
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
index c873e682b67f..b6bfa169a002 100644
--- a/arch/s390/include/asm/pci.h
+++ b/arch/s390/include/asm/pci.h
@@ -9,7 +9,6 @@
 #include <linux/pci.h>
 #include <linux/mutex.h>
 #include <asm-generic/pci.h>
-#include <asm-generic/pci-dma-compat.h>
 #include <asm/pci_clp.h>
 #include <asm/pci_debug.h>
 
@@ -45,7 +44,7 @@ struct zpci_fmb {
 	u64 rpcit_ops;
 	u64 dma_rbytes;
 	u64 dma_wbytes;
-} __packed __aligned(16);
+} __packed __aligned(64);
 
 enum zpci_state {
 	ZPCI_FN_STATE_RESERVED,
@@ -66,7 +65,6 @@ struct s390_domain;
 
 /* Private data per function */
 struct zpci_dev {
-	struct pci_dev	*pdev;
 	struct pci_bus	*bus;
 	struct list_head entry;		/* list of all zpci_devices, needed for hotplug, etc. */
 
@@ -192,7 +190,7 @@ int zpci_fmb_disable_device(struct zpci_dev *);
 /* Debug */
 int zpci_debug_init(void);
 void zpci_debug_exit(void);
-void zpci_debug_init_device(struct zpci_dev *);
+void zpci_debug_init_device(struct zpci_dev *, const char *);
 void zpci_debug_exit_device(struct zpci_dev *);
 void zpci_debug_info(struct zpci_dev *, struct seq_file *);
 
diff --git a/arch/s390/include/asm/pci_clp.h b/arch/s390/include/asm/pci_clp.h
index dd78f92f1cce..e75c64cbcf08 100644
--- a/arch/s390/include/asm/pci_clp.h
+++ b/arch/s390/include/asm/pci_clp.h
@@ -49,9 +49,6 @@ struct clp_fh_list_entry {
 /* List PCI functions request */
 struct clp_req_list_pci {
 	struct clp_req_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64 reserved1;
 	u64 resume_token;
 	u64 reserved2;
 } __packed;
@@ -59,9 +56,6 @@ struct clp_req_list_pci {
 /* List PCI functions response */
 struct clp_rsp_list_pci {
 	struct clp_rsp_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64 reserved1;
 	u64 resume_token;
 	u32 reserved2;
 	u16 max_fn;
@@ -73,9 +67,6 @@ struct clp_rsp_list_pci {
 /* Query PCI function request */
 struct clp_req_query_pci {
 	struct clp_req_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64 reserved1;
 	u32 fh;				/* function handle */
 	u32 reserved2;
 	u64 reserved3;
@@ -84,9 +75,6 @@ struct clp_req_query_pci {
 /* Query PCI function response */
 struct clp_rsp_query_pci {
 	struct clp_rsp_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64			: 64;
 	u16 vfn;			/* virtual fn number */
 	u16			:  7;
 	u16 util_str_avail	:  1;	/* utility string available? */
@@ -108,21 +96,15 @@ struct clp_rsp_query_pci {
 /* Query PCI function group request */
 struct clp_req_query_pci_grp {
 	struct clp_req_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64 reserved1;
-	u32			: 24;
+	u32 reserved2		: 24;
 	u32 pfgid		:  8;	/* function group id */
-	u32 reserved2;
-	u64 reserved3;
+	u32 reserved3;
+	u64 reserved4;
 } __packed;
 
 /* Query PCI function group response */
 struct clp_rsp_query_pci_grp {
 	struct clp_rsp_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64 reserved1;
 	u16			:  4;
 	u16 noi			: 12;	/* number of interrupts */
 	u8 version;
@@ -141,9 +123,6 @@ struct clp_rsp_query_pci_grp {
 /* Set PCI function request */
 struct clp_req_set_pci {
 	struct clp_req_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64 reserved1;
 	u32 fh;				/* function handle */
 	u16 reserved2;
 	u8 oc;				/* operation controls */
@@ -154,9 +133,6 @@ struct clp_req_set_pci {
 /* Set PCI function response */
 struct clp_rsp_set_pci {
 	struct clp_rsp_hdr hdr;
-	u32 fmt			:  4;	/* cmd request block format */
-	u32			: 28;
-	u64 reserved1;
 	u32 fh;				/* function handle */
 	u32 reserved3;
 	u64 reserved4;
diff --git a/arch/s390/include/asm/pci_dma.h b/arch/s390/include/asm/pci_dma.h
index 7a7abf1a5537..92df3eb8d14e 100644
--- a/arch/s390/include/asm/pci_dma.h
+++ b/arch/s390/include/asm/pci_dma.h
@@ -23,6 +23,8 @@ enum zpci_ioat_dtype {
 #define ZPCI_IOTA_FS_2G			2
 #define ZPCI_KEY			(PAGE_DEFAULT_KEY << 5)
 
+#define ZPCI_TABLE_SIZE_RT	(1UL << 42)
+
 #define ZPCI_IOTA_STO_FLAG	(ZPCI_IOTA_IOT_ENABLED | ZPCI_KEY | ZPCI_IOTA_DT_ST)
 #define ZPCI_IOTA_RTTO_FLAG	(ZPCI_IOTA_IOT_ENABLED | ZPCI_KEY | ZPCI_IOTA_DT_RT)
 #define ZPCI_IOTA_RSTO_FLAG	(ZPCI_IOTA_IOT_ENABLED | ZPCI_KEY | ZPCI_IOTA_DT_RS)
@@ -195,5 +197,7 @@ void zpci_dma_exit_device(struct zpci_dev *);
 void dma_free_seg_table(unsigned long);
 unsigned long *dma_alloc_cpu_table(void);
 void dma_cleanup_tables(unsigned long *);
-void dma_update_cpu_trans(unsigned long *, void *, dma_addr_t, int);
+unsigned long *dma_walk_cpu_trans(unsigned long *rto, dma_addr_t dma_addr);
+void dma_update_cpu_trans(unsigned long *entry, void *page_addr, int flags);
+
 #endif
diff --git a/arch/s390/include/asm/pci_io.h b/arch/s390/include/asm/pci_io.h
index 1a9a98de5bde..69aa18be61af 100644
--- a/arch/s390/include/asm/pci_io.h
+++ b/arch/s390/include/asm/pci_io.h
@@ -8,10 +8,13 @@
 #include <asm/pci_insn.h>
 
 /* I/O Map */
-#define ZPCI_IOMAP_MAX_ENTRIES		0x7fff
-#define ZPCI_IOMAP_ADDR_BASE		0x8000000000000000ULL
-#define ZPCI_IOMAP_ADDR_IDX_MASK	0x7fff000000000000ULL
-#define ZPCI_IOMAP_ADDR_OFF_MASK	0x0000ffffffffffffULL
+#define ZPCI_IOMAP_SHIFT		48
+#define ZPCI_IOMAP_ADDR_BASE		0x8000000000000000UL
+#define ZPCI_IOMAP_ADDR_OFF_MASK	((1UL << ZPCI_IOMAP_SHIFT) - 1)
+#define ZPCI_IOMAP_MAX_ENTRIES							\
+	((ULONG_MAX - ZPCI_IOMAP_ADDR_BASE + 1) / (1UL << ZPCI_IOMAP_SHIFT))
+#define ZPCI_IOMAP_ADDR_IDX_MASK						\
+	(~ZPCI_IOMAP_ADDR_OFF_MASK - ZPCI_IOMAP_ADDR_BASE)
 
 struct zpci_iomap_entry {
 	u32 fh;
@@ -21,8 +24,9 @@ struct zpci_iomap_entry {
 
 extern struct zpci_iomap_entry *zpci_iomap_start;
 
+#define ZPCI_ADDR(idx) (ZPCI_IOMAP_ADDR_BASE | ((u64) idx << ZPCI_IOMAP_SHIFT))
 #define ZPCI_IDX(addr)								\
-	(((__force u64) addr & ZPCI_IOMAP_ADDR_IDX_MASK) >> 48)
+	(((__force u64) addr & ZPCI_IOMAP_ADDR_IDX_MASK) >> ZPCI_IOMAP_SHIFT)
 #define ZPCI_OFFSET(addr)							\
 	((__force u64) addr & ZPCI_IOMAP_ADDR_OFF_MASK)
 
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
index 6d6556ca24aa..90240dfef76a 100644
--- a/arch/s390/include/asm/percpu.h
+++ b/arch/s390/include/asm/percpu.h
@@ -178,7 +178,6 @@
 	ret__;								\
 })
 
-#define this_cpu_cmpxchg_double_4 arch_this_cpu_cmpxchg_double
 #define this_cpu_cmpxchg_double_8 arch_this_cpu_cmpxchg_double
 
 #include <asm-generic/percpu.h>
diff --git a/arch/s390/include/asm/perf_event.h b/arch/s390/include/asm/perf_event.h
index f897ec73dc8c..1f7ff85c5e4c 100644
--- a/arch/s390/include/asm/perf_event.h
+++ b/arch/s390/include/asm/perf_event.h
@@ -21,7 +21,7 @@
 #define PMU_F_ERR_LSDA			0x0200
 #define PMU_F_ERR_MASK			(PMU_F_ERR_IBE|PMU_F_ERR_LSDA)
 
-/* Perf defintions for PMU event attributes in sysfs */
+/* Perf definitions for PMU event attributes in sysfs */
 extern __init const struct attribute_group **cpumf_cf_event_group(void);
 extern ssize_t cpumf_events_sysfs_show(struct device *dev,
 				       struct device_attribute *attr,
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index 7b7858f158b4..9b3d9b6099f2 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -23,10 +23,6 @@ void page_table_free(struct mm_struct *, unsigned long *);
 void page_table_free_rcu(struct mmu_gather *, unsigned long *, unsigned long);
 extern int page_table_allocate_pgste;
 
-int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
-			  unsigned long key, bool nq);
-unsigned long get_guest_storage_key(struct mm_struct *mm, unsigned long addr);
-
 static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
 {
 	typedef struct { char _[n]; } addrtype;
@@ -100,12 +96,26 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	spin_lock_init(&mm->context.list_lock);
-	INIT_LIST_HEAD(&mm->context.pgtable_list);
-	INIT_LIST_HEAD(&mm->context.gmap_list);
-	return (pgd_t *) crst_table_alloc(mm);
+	unsigned long *table = crst_table_alloc(mm);
+
+	if (!table)
+		return NULL;
+	if (mm->context.asce_limit == (1UL << 31)) {
+		/* Forking a compat process with 2 page table levels */
+		if (!pgtable_pmd_page_ctor(virt_to_page(table))) {
+			crst_table_free(mm, table);
+			return NULL;
+		}
+	}
+	return (pgd_t *) table;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	if (mm->context.asce_limit == (1UL << 31))
+		pgtable_pmd_page_dtor(virt_to_page(pgd));
+	crst_table_free(mm, (unsigned long *) pgd);
 }
-#define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd)
 
 static inline void pmd_populate(struct mm_struct *mm,
 				pmd_t *pmd, pgtable_t pte)
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 024f85f947ae..2f66645587a2 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -286,7 +286,6 @@ static inline int is_module_addr(void *addr)
 
 #define _SEGMENT_ENTRY_DIRTY	0x2000	/* SW segment dirty bit */
 #define _SEGMENT_ENTRY_YOUNG	0x1000	/* SW segment young bit */
-#define _SEGMENT_ENTRY_SPLIT	0x0800	/* THP splitting bit */
 #define _SEGMENT_ENTRY_LARGE	0x0400	/* STE-format control, large page */
 #define _SEGMENT_ENTRY_READ	0x0002	/* SW segment read bit */
 #define _SEGMENT_ENTRY_WRITE	0x0001	/* SW segment write bit */
@@ -299,15 +298,15 @@ static inline int is_module_addr(void *addr)
 
 /*
  * Segment table entry encoding (R = read-only, I = invalid, y = young bit):
- *				dy..R...I...wr
+ *				dy..R...I...rw
  * prot-none, clean, old	00..1...1...00
  * prot-none, clean, young	01..1...1...00
  * prot-none, dirty, old	10..1...1...00
  * prot-none, dirty, young	11..1...1...00
- * read-only, clean, old	00..1...1...01
- * read-only, clean, young	01..1...0...01
- * read-only, dirty, old	10..1...1...01
- * read-only, dirty, young	11..1...0...01
+ * read-only, clean, old	00..1...1...10
+ * read-only, clean, young	01..1...0...10
+ * read-only, dirty, old	10..1...1...10
+ * read-only, dirty, young	11..1...0...10
  * read-write, clean, old	00..1...1...11
  * read-write, clean, young	01..1...0...11
  * read-write, dirty, old	10..0...1...11
@@ -318,8 +317,6 @@ static inline int is_module_addr(void *addr)
  * SW-bits: y young, d dirty, r read, w write
  */
 
-#define _SEGMENT_ENTRY_SPLIT_BIT 11	/* THP splitting bit number */
-
 /* Page status table bits for virtualization */
 #define PGSTE_ACC_BITS	0xf000000000000000UL
 #define PGSTE_FP_BIT	0x0800000000000000UL
@@ -523,19 +520,6 @@ static inline int pmd_bad(pmd_t pmd)
 	return (pmd_val(pmd) & ~_SEGMENT_ENTRY_BITS) != 0;
 }
 
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-extern void pmdp_splitting_flush(struct vm_area_struct *vma,
-				 unsigned long addr, pmd_t *pmdp);
-
-#define  __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
-extern int pmdp_set_access_flags(struct vm_area_struct *vma,
-				 unsigned long address, pmd_t *pmdp,
-				 pmd_t entry, int dirty);
-
-#define __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
-extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
-				  unsigned long address, pmd_t *pmdp);
-
 #define __HAVE_ARCH_PMD_WRITE
 static inline int pmd_write(pmd_t pmd)
 {
@@ -638,208 +622,6 @@ static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
 	return pmd;
 }
 
-static inline pgste_t pgste_get_lock(pte_t *ptep)
-{
-	unsigned long new = 0;
-#ifdef CONFIG_PGSTE
-	unsigned long old;
-
-	preempt_disable();
-	asm(
-		"	lg	%0,%2\n"
-		"0:	lgr	%1,%0\n"
-		"	nihh	%0,0xff7f\n"	/* clear PCL bit in old */
-		"	oihh	%1,0x0080\n"	/* set PCL bit in new */
-		"	csg	%0,%1,%2\n"
-		"	jl	0b\n"
-		: "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE])
-		: "Q" (ptep[PTRS_PER_PTE]) : "cc", "memory");
-#endif
-	return __pgste(new);
-}
-
-static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste)
-{
-#ifdef CONFIG_PGSTE
-	asm(
-		"	nihh	%1,0xff7f\n"	/* clear PCL bit */
-		"	stg	%1,%0\n"
-		: "=Q" (ptep[PTRS_PER_PTE])
-		: "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE])
-		: "cc", "memory");
-	preempt_enable();
-#endif
-}
-
-static inline pgste_t pgste_get(pte_t *ptep)
-{
-	unsigned long pgste = 0;
-#ifdef CONFIG_PGSTE
-	pgste = *(unsigned long *)(ptep + PTRS_PER_PTE);
-#endif
-	return __pgste(pgste);
-}
-
-static inline void pgste_set(pte_t *ptep, pgste_t pgste)
-{
-#ifdef CONFIG_PGSTE
-	*(pgste_t *)(ptep + PTRS_PER_PTE) = pgste;
-#endif
-}
-
-static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste,
-				       struct mm_struct *mm)
-{
-#ifdef CONFIG_PGSTE
-	unsigned long address, bits, skey;
-
-	if (!mm_use_skey(mm) || pte_val(*ptep) & _PAGE_INVALID)
-		return pgste;
-	address = pte_val(*ptep) & PAGE_MASK;
-	skey = (unsigned long) page_get_storage_key(address);
-	bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
-	/* Transfer page changed & referenced bit to guest bits in pgste */
-	pgste_val(pgste) |= bits << 48;		/* GR bit & GC bit */
-	/* Copy page access key and fetch protection bit to pgste */
-	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT);
-	pgste_val(pgste) |= (skey & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56;
-#endif
-	return pgste;
-
-}
-
-static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry,
-				 struct mm_struct *mm)
-{
-#ifdef CONFIG_PGSTE
-	unsigned long address;
-	unsigned long nkey;
-
-	if (!mm_use_skey(mm) || pte_val(entry) & _PAGE_INVALID)
-		return;
-	VM_BUG_ON(!(pte_val(*ptep) & _PAGE_INVALID));
-	address = pte_val(entry) & PAGE_MASK;
-	/*
-	 * Set page access key and fetch protection bit from pgste.
-	 * The guest C/R information is still in the PGSTE, set real
-	 * key C/R to 0.
-	 */
-	nkey = (pgste_val(pgste) & (PGSTE_ACC_BITS | PGSTE_FP_BIT)) >> 56;
-	nkey |= (pgste_val(pgste) & (PGSTE_GR_BIT | PGSTE_GC_BIT)) >> 48;
-	page_set_storage_key(address, nkey, 0);
-#endif
-}
-
-static inline pgste_t pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
-{
-	if ((pte_val(entry) & _PAGE_PRESENT) &&
-	    (pte_val(entry) & _PAGE_WRITE) &&
-	    !(pte_val(entry) & _PAGE_INVALID)) {
-		if (!MACHINE_HAS_ESOP) {
-			/*
-			 * Without enhanced suppression-on-protection force
-			 * the dirty bit on for all writable ptes.
-			 */
-			pte_val(entry) |= _PAGE_DIRTY;
-			pte_val(entry) &= ~_PAGE_PROTECT;
-		}
-		if (!(pte_val(entry) & _PAGE_PROTECT))
-			/* This pte allows write access, set user-dirty */
-			pgste_val(pgste) |= PGSTE_UC_BIT;
-	}
-	*ptep = entry;
-	return pgste;
-}
-
-/**
- * struct gmap_struct - guest address space
- * @crst_list: list of all crst tables used in the guest address space
- * @mm: pointer to the parent mm_struct
- * @guest_to_host: radix tree with guest to host address translation
- * @host_to_guest: radix tree with pointer to segment table entries
- * @guest_table_lock: spinlock to protect all entries in the guest page table
- * @table: pointer to the page directory
- * @asce: address space control element for gmap page table
- * @pfault_enabled: defines if pfaults are applicable for the guest
- */
-struct gmap {
-	struct list_head list;
-	struct list_head crst_list;
-	struct mm_struct *mm;
-	struct radix_tree_root guest_to_host;
-	struct radix_tree_root host_to_guest;
-	spinlock_t guest_table_lock;
-	unsigned long *table;
-	unsigned long asce;
-	unsigned long asce_end;
-	void *private;
-	bool pfault_enabled;
-};
-
-/**
- * struct gmap_notifier - notify function block for page invalidation
- * @notifier_call: address of callback function
- */
-struct gmap_notifier {
-	struct list_head list;
-	void (*notifier_call)(struct gmap *gmap, unsigned long gaddr);
-};
-
-struct gmap *gmap_alloc(struct mm_struct *mm, unsigned long limit);
-void gmap_free(struct gmap *gmap);
-void gmap_enable(struct gmap *gmap);
-void gmap_disable(struct gmap *gmap);
-int gmap_map_segment(struct gmap *gmap, unsigned long from,
-		     unsigned long to, unsigned long len);
-int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len);
-unsigned long __gmap_translate(struct gmap *, unsigned long gaddr);
-unsigned long gmap_translate(struct gmap *, unsigned long gaddr);
-int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr);
-int gmap_fault(struct gmap *, unsigned long gaddr, unsigned int fault_flags);
-void gmap_discard(struct gmap *, unsigned long from, unsigned long to);
-void __gmap_zap(struct gmap *, unsigned long gaddr);
-bool gmap_test_and_clear_dirty(unsigned long address, struct gmap *);
-
-
-void gmap_register_ipte_notifier(struct gmap_notifier *);
-void gmap_unregister_ipte_notifier(struct gmap_notifier *);
-int gmap_ipte_notify(struct gmap *, unsigned long start, unsigned long len);
-void gmap_do_ipte_notify(struct mm_struct *, unsigned long addr, pte_t *);
-
-static inline pgste_t pgste_ipte_notify(struct mm_struct *mm,
-					unsigned long addr,
-					pte_t *ptep, pgste_t pgste)
-{
-#ifdef CONFIG_PGSTE
-	if (pgste_val(pgste) & PGSTE_IN_BIT) {
-		pgste_val(pgste) &= ~PGSTE_IN_BIT;
-		gmap_do_ipte_notify(mm, addr, ptep);
-	}
-#endif
-	return pgste;
-}
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified.  Thus, the following
- * hook is made available.
- */
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t entry)
-{
-	pgste_t pgste;
-
-	if (mm_has_pgste(mm)) {
-		pgste = pgste_get_lock(ptep);
-		pgste_val(pgste) &= ~_PGSTE_GPS_ZERO;
-		pgste_set_key(ptep, pgste, entry, mm);
-		pgste = pgste_set_pte(ptep, pgste, entry);
-		pgste_set_unlock(ptep, pgste);
-	} else {
-		*ptep = entry;
-	}
-}
-
 /*
  * query functions pte_write/pte_dirty/pte_young only work if
  * pte_present() is true. Undefined behaviour if not..
@@ -1005,96 +787,30 @@ static inline void __ptep_ipte_range(unsigned long address, int nr, pte_t *ptep)
 	} while (nr != 255);
 }
 
-static inline void ptep_flush_direct(struct mm_struct *mm,
-				     unsigned long address, pte_t *ptep)
-{
-	int active, count;
-
-	if (pte_val(*ptep) & _PAGE_INVALID)
-		return;
-	active = (mm == current->active_mm) ? 1 : 0;
-	count = atomic_add_return(0x10000, &mm->context.attach_count);
-	if (MACHINE_HAS_TLB_LC && (count & 0xffff) <= active &&
-	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
-		__ptep_ipte_local(address, ptep);
-	else
-		__ptep_ipte(address, ptep);
-	atomic_sub(0x10000, &mm->context.attach_count);
-}
-
-static inline void ptep_flush_lazy(struct mm_struct *mm,
-				   unsigned long address, pte_t *ptep)
-{
-	int active, count;
-
-	if (pte_val(*ptep) & _PAGE_INVALID)
-		return;
-	active = (mm == current->active_mm) ? 1 : 0;
-	count = atomic_add_return(0x10000, &mm->context.attach_count);
-	if ((count & 0xffff) <= active) {
-		pte_val(*ptep) |= _PAGE_INVALID;
-		mm->context.flush_mm = 1;
-	} else
-		__ptep_ipte(address, ptep);
-	atomic_sub(0x10000, &mm->context.attach_count);
-}
-
 /*
- * Get (and clear) the user dirty bit for a pte.
+ * This is hard to understand. ptep_get_and_clear and ptep_clear_flush
+ * both clear the TLB for the unmapped pte. The reason is that
+ * ptep_get_and_clear is used in common code (e.g. change_pte_range)
+ * to modify an active pte. The sequence is
+ *   1) ptep_get_and_clear
+ *   2) set_pte_at
+ *   3) flush_tlb_range
+ * On s390 the tlb needs to get flushed with the modification of the pte
+ * if the pte is active. The only way how this can be implemented is to
+ * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range
+ * is a nop.
  */
-static inline int ptep_test_and_clear_user_dirty(struct mm_struct *mm,
-						 unsigned long addr,
-						 pte_t *ptep)
-{
-	pgste_t pgste;
-	pte_t pte;
-	int dirty;
-
-	if (!mm_has_pgste(mm))
-		return 0;
-	pgste = pgste_get_lock(ptep);
-	dirty = !!(pgste_val(pgste) & PGSTE_UC_BIT);
-	pgste_val(pgste) &= ~PGSTE_UC_BIT;
-	pte = *ptep;
-	if (dirty && (pte_val(pte) & _PAGE_PRESENT)) {
-		pgste = pgste_ipte_notify(mm, addr, ptep, pgste);
-		__ptep_ipte(addr, ptep);
-		if (MACHINE_HAS_ESOP || !(pte_val(pte) & _PAGE_WRITE))
-			pte_val(pte) |= _PAGE_PROTECT;
-		else
-			pte_val(pte) |= _PAGE_INVALID;
-		*ptep = pte;
-	}
-	pgste_set_unlock(ptep, pgste);
-	return dirty;
-}
+pte_t ptep_xchg_direct(struct mm_struct *, unsigned long, pte_t *, pte_t);
+pte_t ptep_xchg_lazy(struct mm_struct *, unsigned long, pte_t *, pte_t);
 
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
 static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
 					    unsigned long addr, pte_t *ptep)
 {
-	pgste_t pgste;
-	pte_t pte, oldpte;
-	int young;
-
-	if (mm_has_pgste(vma->vm_mm)) {
-		pgste = pgste_get_lock(ptep);
-		pgste = pgste_ipte_notify(vma->vm_mm, addr, ptep, pgste);
-	}
-
-	oldpte = pte = *ptep;
-	ptep_flush_direct(vma->vm_mm, addr, ptep);
-	young = pte_young(pte);
-	pte = pte_mkold(pte);
-
-	if (mm_has_pgste(vma->vm_mm)) {
-		pgste = pgste_update_all(&oldpte, pgste, vma->vm_mm);
-		pgste = pgste_set_pte(ptep, pgste, pte);
-		pgste_set_unlock(ptep, pgste);
-	} else
-		*ptep = pte;
+	pte_t pte = *ptep;
 
-	return young;
+	pte = ptep_xchg_direct(vma->vm_mm, addr, ptep, pte_mkold(pte));
+	return pte_young(pte);
 }
 
 #define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
@@ -1104,104 +820,22 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
 	return ptep_test_and_clear_young(vma, address, ptep);
 }
 
-/*
- * This is hard to understand. ptep_get_and_clear and ptep_clear_flush
- * both clear the TLB for the unmapped pte. The reason is that
- * ptep_get_and_clear is used in common code (e.g. change_pte_range)
- * to modify an active pte. The sequence is
- *   1) ptep_get_and_clear
- *   2) set_pte_at
- *   3) flush_tlb_range
- * On s390 the tlb needs to get flushed with the modification of the pte
- * if the pte is active. The only way how this can be implemented is to
- * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range
- * is a nop.
- */
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
 static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
-				       unsigned long address, pte_t *ptep)
+				       unsigned long addr, pte_t *ptep)
 {
-	pgste_t pgste;
-	pte_t pte;
-
-	if (mm_has_pgste(mm)) {
-		pgste = pgste_get_lock(ptep);
-		pgste = pgste_ipte_notify(mm, address, ptep, pgste);
-	}
-
-	pte = *ptep;
-	ptep_flush_lazy(mm, address, ptep);
-	pte_val(*ptep) = _PAGE_INVALID;
-
-	if (mm_has_pgste(mm)) {
-		pgste = pgste_update_all(&pte, pgste, mm);
-		pgste_set_unlock(ptep, pgste);
-	}
-	return pte;
+	return ptep_xchg_lazy(mm, addr, ptep, __pte(_PAGE_INVALID));
 }
 
 #define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
-static inline pte_t ptep_modify_prot_start(struct mm_struct *mm,
-					   unsigned long address,
-					   pte_t *ptep)
-{
-	pgste_t pgste;
-	pte_t pte;
-
-	if (mm_has_pgste(mm)) {
-		pgste = pgste_get_lock(ptep);
-		pgste_ipte_notify(mm, address, ptep, pgste);
-	}
-
-	pte = *ptep;
-	ptep_flush_lazy(mm, address, ptep);
-
-	if (mm_has_pgste(mm)) {
-		pgste = pgste_update_all(&pte, pgste, mm);
-		pgste_set(ptep, pgste);
-	}
-	return pte;
-}
-
-static inline void ptep_modify_prot_commit(struct mm_struct *mm,
-					   unsigned long address,
-					   pte_t *ptep, pte_t pte)
-{
-	pgste_t pgste;
-
-	if (mm_has_pgste(mm)) {
-		pgste = pgste_get(ptep);
-		pgste_set_key(ptep, pgste, pte, mm);
-		pgste = pgste_set_pte(ptep, pgste, pte);
-		pgste_set_unlock(ptep, pgste);
-	} else
-		*ptep = pte;
-}
+pte_t ptep_modify_prot_start(struct mm_struct *, unsigned long, pte_t *);
+void ptep_modify_prot_commit(struct mm_struct *, unsigned long, pte_t *, pte_t);
 
 #define __HAVE_ARCH_PTEP_CLEAR_FLUSH
 static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
-				     unsigned long address, pte_t *ptep)
+				     unsigned long addr, pte_t *ptep)
 {
-	pgste_t pgste;
-	pte_t pte;
-
-	if (mm_has_pgste(vma->vm_mm)) {
-		pgste = pgste_get_lock(ptep);
-		pgste = pgste_ipte_notify(vma->vm_mm, address, ptep, pgste);
-	}
-
-	pte = *ptep;
-	ptep_flush_direct(vma->vm_mm, address, ptep);
-	pte_val(*ptep) = _PAGE_INVALID;
-
-	if (mm_has_pgste(vma->vm_mm)) {
-		if ((pgste_val(pgste) & _PGSTE_GPS_USAGE_MASK) ==
-		    _PGSTE_GPS_USAGE_UNUSED)
-			pte_val(pte) |= _PAGE_UNUSED;
-		pgste = pgste_update_all(&pte, pgste, vma->vm_mm);
-		pgste_set_unlock(ptep, pgste);
-	}
-	return pte;
+	return ptep_xchg_direct(vma->vm_mm, addr, ptep, __pte(_PAGE_INVALID));
 }
 
 /*
@@ -1213,80 +847,66 @@ static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
  */
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
 static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
-					    unsigned long address,
+					    unsigned long addr,
 					    pte_t *ptep, int full)
 {
-	pgste_t pgste;
-	pte_t pte;
-
-	if (!full && mm_has_pgste(mm)) {
-		pgste = pgste_get_lock(ptep);
-		pgste = pgste_ipte_notify(mm, address, ptep, pgste);
-	}
-
-	pte = *ptep;
-	if (!full)
-		ptep_flush_lazy(mm, address, ptep);
-	pte_val(*ptep) = _PAGE_INVALID;
-
-	if (!full && mm_has_pgste(mm)) {
-		pgste = pgste_update_all(&pte, pgste, mm);
-		pgste_set_unlock(ptep, pgste);
+	if (full) {
+		pte_t pte = *ptep;
+		*ptep = __pte(_PAGE_INVALID);
+		return pte;
 	}
-	return pte;
+	return ptep_xchg_lazy(mm, addr, ptep, __pte(_PAGE_INVALID));
 }
 
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline pte_t ptep_set_wrprotect(struct mm_struct *mm,
-				       unsigned long address, pte_t *ptep)
+static inline void ptep_set_wrprotect(struct mm_struct *mm,
+				      unsigned long addr, pte_t *ptep)
 {
-	pgste_t pgste;
 	pte_t pte = *ptep;
 
-	if (pte_write(pte)) {
-		if (mm_has_pgste(mm)) {
-			pgste = pgste_get_lock(ptep);
-			pgste = pgste_ipte_notify(mm, address, ptep, pgste);
-		}
-
-		ptep_flush_lazy(mm, address, ptep);
-		pte = pte_wrprotect(pte);
-
-		if (mm_has_pgste(mm)) {
-			pgste = pgste_set_pte(ptep, pgste, pte);
-			pgste_set_unlock(ptep, pgste);
-		} else
-			*ptep = pte;
-	}
-	return pte;
+	if (pte_write(pte))
+		ptep_xchg_lazy(mm, addr, ptep, pte_wrprotect(pte));
 }
 
 #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
 static inline int ptep_set_access_flags(struct vm_area_struct *vma,
-					unsigned long address, pte_t *ptep,
+					unsigned long addr, pte_t *ptep,
 					pte_t entry, int dirty)
 {
-	pgste_t pgste;
-	pte_t oldpte;
-
-	oldpte = *ptep;
-	if (pte_same(oldpte, entry))
+	if (pte_same(*ptep, entry))
 		return 0;
-	if (mm_has_pgste(vma->vm_mm)) {
-		pgste = pgste_get_lock(ptep);
-		pgste = pgste_ipte_notify(vma->vm_mm, address, ptep, pgste);
-	}
+	ptep_xchg_direct(vma->vm_mm, addr, ptep, entry);
+	return 1;
+}
 
-	ptep_flush_direct(vma->vm_mm, address, ptep);
+/*
+ * Additional functions to handle KVM guest page tables
+ */
+void ptep_set_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t entry);
+void ptep_set_notify(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void ptep_notify(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void ptep_zap_unused(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep , int reset);
+void ptep_zap_key(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+
+bool test_and_clear_guest_dirty(struct mm_struct *mm, unsigned long address);
+int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
+			  unsigned char key, bool nq);
+unsigned char get_guest_storage_key(struct mm_struct *mm, unsigned long addr);
 
-	if (mm_has_pgste(vma->vm_mm)) {
-		if (pte_val(oldpte) & _PAGE_INVALID)
-			pgste_set_key(ptep, pgste, entry, vma->vm_mm);
-		pgste = pgste_set_pte(ptep, pgste, entry);
-		pgste_set_unlock(ptep, pgste);
-	} else
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t entry)
+{
+	if (mm_has_pgste(mm))
+		ptep_set_pte_at(mm, addr, ptep, entry);
+	else
 		*ptep = entry;
-	return 1;
 }
 
 /*
@@ -1424,8 +1044,7 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 	if (pmd_large(pmd)) {
 		pmd_val(pmd) &= _SEGMENT_ENTRY_ORIGIN_LARGE |
 			_SEGMENT_ENTRY_DIRTY | _SEGMENT_ENTRY_YOUNG |
-			_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_SPLIT |
-			_SEGMENT_ENTRY_SOFT_DIRTY;
+			_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_SOFT_DIRTY;
 		pmd_val(pmd) |= massage_pgprot_pmd(newprot);
 		if (!(pmd_val(pmd) & _SEGMENT_ENTRY_DIRTY))
 			pmd_val(pmd) |= _SEGMENT_ENTRY_PROTECT;
@@ -1484,59 +1103,50 @@ static inline void __pmdp_idte_local(unsigned long address, pmd_t *pmdp)
 		: "cc" );
 }
 
-static inline void pmdp_flush_direct(struct mm_struct *mm,
-				     unsigned long address, pmd_t *pmdp)
-{
-	int active, count;
+pmd_t pmdp_xchg_direct(struct mm_struct *, unsigned long, pmd_t *, pmd_t);
+pmd_t pmdp_xchg_lazy(struct mm_struct *, unsigned long, pmd_t *, pmd_t);
 
-	if (pmd_val(*pmdp) & _SEGMENT_ENTRY_INVALID)
-		return;
-	if (!MACHINE_HAS_IDTE) {
-		__pmdp_csp(pmdp);
-		return;
-	}
-	active = (mm == current->active_mm) ? 1 : 0;
-	count = atomic_add_return(0x10000, &mm->context.attach_count);
-	if (MACHINE_HAS_TLB_LC && (count & 0xffff) <= active &&
-	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
-		__pmdp_idte_local(address, pmdp);
-	else
-		__pmdp_idte(address, pmdp);
-	atomic_sub(0x10000, &mm->context.attach_count);
-}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+
+#define __HAVE_ARCH_PGTABLE_DEPOSIT
+void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
+				pgtable_t pgtable);
 
-static inline void pmdp_flush_lazy(struct mm_struct *mm,
-				   unsigned long address, pmd_t *pmdp)
+#define __HAVE_ARCH_PGTABLE_WITHDRAW
+pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
+
+#define  __HAVE_ARCH_PMDP_SET_ACCESS_FLAGS
+static inline int pmdp_set_access_flags(struct vm_area_struct *vma,
+					unsigned long addr, pmd_t *pmdp,
+					pmd_t entry, int dirty)
 {
-	int active, count;
+	VM_BUG_ON(addr & ~HPAGE_MASK);
 
-	if (pmd_val(*pmdp) & _SEGMENT_ENTRY_INVALID)
-		return;
-	active = (mm == current->active_mm) ? 1 : 0;
-	count = atomic_add_return(0x10000, &mm->context.attach_count);
-	if ((count & 0xffff) <= active) {
-		pmd_val(*pmdp) |= _SEGMENT_ENTRY_INVALID;
-		mm->context.flush_mm = 1;
-	} else if (MACHINE_HAS_IDTE)
-		__pmdp_idte(address, pmdp);
-	else
-		__pmdp_csp(pmdp);
-	atomic_sub(0x10000, &mm->context.attach_count);
+	entry = pmd_mkyoung(entry);
+	if (dirty)
+		entry = pmd_mkdirty(entry);
+	if (pmd_val(*pmdp) == pmd_val(entry))
+		return 0;
+	pmdp_xchg_direct(vma->vm_mm, addr, pmdp, entry);
+	return 1;
 }
 
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-
-#define __HAVE_ARCH_PGTABLE_DEPOSIT
-extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				       pgtable_t pgtable);
+#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
+static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long addr, pmd_t *pmdp)
+{
+	pmd_t pmd = *pmdp;
 
-#define __HAVE_ARCH_PGTABLE_WITHDRAW
-extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
+	pmd = pmdp_xchg_direct(vma->vm_mm, addr, pmdp, pmd_mkold(pmd));
+	return pmd_young(pmd);
+}
 
-static inline int pmd_trans_splitting(pmd_t pmd)
+#define __HAVE_ARCH_PMDP_CLEAR_YOUNG_FLUSH
+static inline int pmdp_clear_flush_young(struct vm_area_struct *vma,
+					 unsigned long addr, pmd_t *pmdp)
 {
-	return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) &&
-		(pmd_val(pmd) & _SEGMENT_ENTRY_SPLIT);
+	VM_BUG_ON(addr & ~HPAGE_MASK);
+	return pmdp_test_and_clear_young(vma, addr, pmdp);
 }
 
 static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
@@ -1553,66 +1163,48 @@ static inline pmd_t pmd_mkhuge(pmd_t pmd)
 	return pmd;
 }
 
-#define __HAVE_ARCH_PMDP_TEST_AND_CLEAR_YOUNG
-static inline int pmdp_test_and_clear_young(struct vm_area_struct *vma,
-					    unsigned long address, pmd_t *pmdp)
-{
-	pmd_t pmd;
-
-	pmd = *pmdp;
-	pmdp_flush_direct(vma->vm_mm, address, pmdp);
-	*pmdp = pmd_mkold(pmd);
-	return pmd_young(pmd);
-}
-
 #define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR
 static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm,
-					    unsigned long address, pmd_t *pmdp)
+					    unsigned long addr, pmd_t *pmdp)
 {
-	pmd_t pmd = *pmdp;
-
-	pmdp_flush_direct(mm, address, pmdp);
-	pmd_clear(pmdp);
-	return pmd;
+	return pmdp_xchg_direct(mm, addr, pmdp, __pmd(_SEGMENT_ENTRY_INVALID));
 }
 
 #define __HAVE_ARCH_PMDP_HUGE_GET_AND_CLEAR_FULL
 static inline pmd_t pmdp_huge_get_and_clear_full(struct mm_struct *mm,
-						 unsigned long address,
+						 unsigned long addr,
 						 pmd_t *pmdp, int full)
 {
-	pmd_t pmd = *pmdp;
-
-	if (!full)
-		pmdp_flush_lazy(mm, address, pmdp);
-	pmd_clear(pmdp);
-	return pmd;
+	if (full) {
+		pmd_t pmd = *pmdp;
+		*pmdp = __pmd(_SEGMENT_ENTRY_INVALID);
+		return pmd;
+	}
+	return pmdp_xchg_lazy(mm, addr, pmdp, __pmd(_SEGMENT_ENTRY_INVALID));
 }
 
 #define __HAVE_ARCH_PMDP_HUGE_CLEAR_FLUSH
 static inline pmd_t pmdp_huge_clear_flush(struct vm_area_struct *vma,
-					  unsigned long address, pmd_t *pmdp)
+					  unsigned long addr, pmd_t *pmdp)
 {
-	return pmdp_huge_get_and_clear(vma->vm_mm, address, pmdp);
+	return pmdp_huge_get_and_clear(vma->vm_mm, addr, pmdp);
 }
 
 #define __HAVE_ARCH_PMDP_INVALIDATE
 static inline void pmdp_invalidate(struct vm_area_struct *vma,
-				   unsigned long address, pmd_t *pmdp)
+				   unsigned long addr, pmd_t *pmdp)
 {
-	pmdp_flush_direct(vma->vm_mm, address, pmdp);
+	pmdp_xchg_direct(vma->vm_mm, addr, pmdp, __pmd(_SEGMENT_ENTRY_INVALID));
 }
 
 #define __HAVE_ARCH_PMDP_SET_WRPROTECT
 static inline void pmdp_set_wrprotect(struct mm_struct *mm,
-				      unsigned long address, pmd_t *pmdp)
+				      unsigned long addr, pmd_t *pmdp)
 {
 	pmd_t pmd = *pmdp;
 
-	if (pmd_write(pmd)) {
-		pmdp_flush_direct(mm, address, pmdp);
-		set_pmd_at(mm, address, pmdp, pmd_wrprotect(pmd));
-	}
+	if (pmd_write(pmd))
+		pmd = pmdp_xchg_lazy(mm, addr, pmdp, pmd_wrprotect(pmd));
 }
 
 static inline pmd_t pmdp_collapse_flush(struct vm_area_struct *vma,
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index b16c3d0a1b9f..d6fd22ea270d 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -18,12 +18,14 @@
 #define CIF_NOHZ_DELAY		2	/* delay HZ disable for a tick */
 #define CIF_FPU			3	/* restore FPU registers */
 #define CIF_IGNORE_IRQ		4	/* ignore interrupt (for udelay) */
+#define CIF_ENABLED_WAIT	5	/* in enabled wait state */
 
 #define _CIF_MCCK_PENDING	_BITUL(CIF_MCCK_PENDING)
 #define _CIF_ASCE		_BITUL(CIF_ASCE)
 #define _CIF_NOHZ_DELAY		_BITUL(CIF_NOHZ_DELAY)
 #define _CIF_FPU		_BITUL(CIF_FPU)
 #define _CIF_IGNORE_IRQ		_BITUL(CIF_IGNORE_IRQ)
+#define _CIF_ENABLED_WAIT	_BITUL(CIF_ENABLED_WAIT)
 
 #ifndef __ASSEMBLY__
 
@@ -52,6 +54,16 @@ static inline int test_cpu_flag(int flag)
 	return !!(S390_lowcore.cpu_flags & (1UL << flag));
 }
 
+/*
+ * Test CIF flag of another CPU. The caller needs to ensure that
+ * CPU hotplug can not happen, e.g. by disabling preemption.
+ */
+static inline int test_cpu_flag_of(int flag, int cpu)
+{
+	struct lowcore *lc = lowcore_ptr[cpu];
+	return !!(lc->cpu_flags & (1UL << flag));
+}
+
 #define arch_needs_cpu() test_cpu_flag(CIF_NOHZ_DELAY)
 
 /*
@@ -154,14 +166,14 @@ extern __vector128 init_task_fpu_regs[__NUM_VXRS];
  */
 #define start_thread(regs, new_psw, new_stackp) do {			\
 	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_EA | PSW_MASK_BA;	\
-	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
+	regs->psw.addr	= new_psw;					\
 	regs->gprs[15]	= new_stackp;					\
 	execve_tail();							\
 } while (0)
 
 #define start_thread31(regs, new_psw, new_stackp) do {			\
 	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_BA;			\
-	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
+	regs->psw.addr	= new_psw;					\
 	regs->gprs[15]	= new_stackp;					\
 	crst_table_downgrade(current->mm, 1UL << 31);			\
 	execve_tail();							\
@@ -172,6 +184,10 @@ struct task_struct;
 struct mm_struct;
 struct seq_file;
 
+typedef int (*dump_trace_func_t)(void *data, unsigned long address);
+void dump_trace(dump_trace_func_t func, void *data,
+		struct task_struct *task, unsigned long sp);
+
 void show_cacheinfo(struct seq_file *m);
 
 /* Free all resources held by a thread. */
@@ -191,6 +207,14 @@ unsigned long get_wchan(struct task_struct *p);
 /* Has task runtime instrumentation enabled ? */
 #define is_ri_task(tsk) (!!(tsk)->thread.ri_cb)
 
+static inline unsigned long current_stack_pointer(void)
+{
+	unsigned long sp;
+
+	asm volatile("la %0,0(15)" : "=a" (sp));
+	return sp;
+}
+
 static inline unsigned short stap(void)
 {
 	unsigned short cpu_address;
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 37cbc50947f2..99bc456cc26a 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -24,25 +24,25 @@
 			 PSW_MASK_PSTATE | PSW_ASC_PRIMARY)
 
 struct psw_bits {
-	unsigned long long	: 1;
-	unsigned long long r	: 1; /* PER-Mask */
-	unsigned long long	: 3;
-	unsigned long long t	: 1; /* DAT Mode */
-	unsigned long long i	: 1; /* Input/Output Mask */
-	unsigned long long e	: 1; /* External Mask */
-	unsigned long long key	: 4; /* PSW Key */
-	unsigned long long	: 1;
-	unsigned long long m	: 1; /* Machine-Check Mask */
-	unsigned long long w	: 1; /* Wait State */
-	unsigned long long p	: 1; /* Problem State */
-	unsigned long long as	: 2; /* Address Space Control */
-	unsigned long long cc	: 2; /* Condition Code */
-	unsigned long long pm	: 4; /* Program Mask */
-	unsigned long long ri	: 1; /* Runtime Instrumentation */
-	unsigned long long	: 6;
-	unsigned long long eaba : 2; /* Addressing Mode */
-	unsigned long long	: 31;
-	unsigned long long ia	: 64;/* Instruction Address */
+	unsigned long	   :  1;
+	unsigned long r	   :  1; /* PER-Mask */
+	unsigned long	   :  3;
+	unsigned long t	   :  1; /* DAT Mode */
+	unsigned long i	   :  1; /* Input/Output Mask */
+	unsigned long e	   :  1; /* External Mask */
+	unsigned long key  :  4; /* PSW Key */
+	unsigned long	   :  1;
+	unsigned long m	   :  1; /* Machine-Check Mask */
+	unsigned long w	   :  1; /* Wait State */
+	unsigned long p	   :  1; /* Problem State */
+	unsigned long as   :  2; /* Address Space Control */
+	unsigned long cc   :  2; /* Condition Code */
+	unsigned long pm   :  4; /* Program Mask */
+	unsigned long ri   :  1; /* Runtime Instrumentation */
+	unsigned long	   :  6;
+	unsigned long eaba :  2; /* Addressing Mode */
+	unsigned long	   : 31;
+	unsigned long ia   : 64; /* Instruction Address */
 };
 
 enum {
@@ -149,7 +149,7 @@ static inline int test_pt_regs_flag(struct pt_regs *regs, int flag)
 #define arch_has_block_step()	(1)
 
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
-#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
+#define instruction_pointer(regs) ((regs)->psw.addr)
 #define user_stack_pointer(regs)((regs)->gprs[15])
 #define profile_pc(regs) instruction_pointer(regs)
 
@@ -161,7 +161,7 @@ static inline long regs_return_value(struct pt_regs *regs)
 static inline void instruction_pointer_set(struct pt_regs *regs,
 					   unsigned long val)
 {
-	regs->psw.addr = val | PSW_ADDR_AMODE;
+	regs->psw.addr = val;
 }
 
 int regs_query_register_offset(const char *name);
@@ -171,7 +171,7 @@ unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n);
 
 static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 {
-	return regs->gprs[15] & PSW_ADDR_INSN;
+	return regs->gprs[15];
 }
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/s390/include/asm/reset.h b/arch/s390/include/asm/reset.h
index 72786067b300..fe11fa88a0e0 100644
--- a/arch/s390/include/asm/reset.h
+++ b/arch/s390/include/asm/reset.h
@@ -15,6 +15,5 @@ struct reset_call {
 
 extern void register_reset_call(struct reset_call *reset);
 extern void unregister_reset_call(struct reset_call *reset);
-extern void s390_reset_system(void (*fn_pre)(void),
-			      void (*fn_post)(void *), void *data);
+extern void s390_reset_system(void);
 #endif /* _ASM_S390_RESET_H */
diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h
index 4b43ee7e6776..fead491dfc28 100644
--- a/arch/s390/include/asm/rwsem.h
+++ b/arch/s390/include/asm/rwsem.h
@@ -31,7 +31,7 @@
  * This should be totally fair - if anything is waiting, a process that wants a
  * lock will go to the back of the queue. When the currently active lock is
  * released, if there's a writer at the front of the queue, then that and only
- * that will be woken up; if there's a bunch of consequtive readers at the
+ * that will be woken up; if there's a bunch of consecutive readers at the
  * front, then they'll all be woken up, but no other readers will be.
  */
 
diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h
index 821dde5f425d..bab456be9a4f 100644
--- a/arch/s390/include/asm/sclp.h
+++ b/arch/s390/include/asm/sclp.h
@@ -29,7 +29,10 @@ struct sclp_ipl_info {
 
 struct sclp_core_entry {
 	u8 core_id;
-	u8 reserved0[2];
+	u8 reserved0;
+	u8 : 4;
+	u8 sief2 : 1;
+	u8 : 3;
 	u8 : 3;
 	u8 siif : 1;
 	u8 sigpif : 1;
@@ -53,16 +56,19 @@ struct sclp_info {
 	unsigned char has_sigpif : 1;
 	unsigned char has_core_type : 1;
 	unsigned char has_sprp : 1;
+	unsigned char has_hvs : 1;
+	unsigned char has_esca : 1;
+	unsigned char has_sief2 : 1;
 	unsigned int ibc;
 	unsigned int mtid;
 	unsigned int mtid_cp;
 	unsigned int mtid_prev;
-	unsigned long long rzm;
-	unsigned long long rnmax;
-	unsigned long long hamax;
+	unsigned long rzm;
+	unsigned long rnmax;
+	unsigned long hamax;
 	unsigned int max_cores;
 	unsigned long hsa_size;
-	unsigned long long facilities;
+	unsigned long facilities;
 };
 extern struct sclp_info sclp;
 
@@ -77,8 +83,9 @@ int sclp_chp_read_info(struct sclp_chp_info *info);
 void sclp_get_ipl_info(struct sclp_ipl_info *info);
 int sclp_pci_configure(u32 fid);
 int sclp_pci_deconfigure(u32 fid);
-int memcpy_hsa(void *dest, unsigned long src, size_t count, int mode);
+int memcpy_hsa_kernel(void *dest, unsigned long src, size_t count);
+int memcpy_hsa_user(void __user *dest, unsigned long src, size_t count);
 void sclp_early_detect(void);
-int _sclp_print_early(const char *);
+void _sclp_print_early(const char *);
 
 #endif /* _ASM_S390_SCLP_H */
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 23537661da0e..c0f0efbb6ab5 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -12,27 +12,24 @@
 #define PARMAREA		0x10400
 
 /*
- * Machine features detected in head.S
+ * Machine features detected in early.c
  */
 
 #define MACHINE_FLAG_VM		_BITUL(0)
-#define MACHINE_FLAG_IEEE	_BITUL(1)
-#define MACHINE_FLAG_CSP	_BITUL(2)
-#define MACHINE_FLAG_MVPG	_BITUL(3)
-#define MACHINE_FLAG_DIAG44	_BITUL(4)
+#define MACHINE_FLAG_KVM	_BITUL(1)
+#define MACHINE_FLAG_LPAR	_BITUL(2)
+#define MACHINE_FLAG_DIAG9C	_BITUL(3)
+#define MACHINE_FLAG_ESOP	_BITUL(4)
 #define MACHINE_FLAG_IDTE	_BITUL(5)
-#define MACHINE_FLAG_DIAG9C	_BITUL(6)
-#define MACHINE_FLAG_KVM	_BITUL(8)
-#define MACHINE_FLAG_ESOP	_BITUL(9)
-#define MACHINE_FLAG_EDAT1	_BITUL(10)
-#define MACHINE_FLAG_EDAT2	_BITUL(11)
-#define MACHINE_FLAG_LPAR	_BITUL(12)
-#define MACHINE_FLAG_LPP	_BITUL(13)
-#define MACHINE_FLAG_TOPOLOGY	_BITUL(14)
-#define MACHINE_FLAG_TE		_BITUL(15)
-#define MACHINE_FLAG_TLB_LC	_BITUL(17)
-#define MACHINE_FLAG_VX		_BITUL(18)
-#define MACHINE_FLAG_CAD	_BITUL(19)
+#define MACHINE_FLAG_DIAG44	_BITUL(6)
+#define MACHINE_FLAG_EDAT1	_BITUL(7)
+#define MACHINE_FLAG_EDAT2	_BITUL(8)
+#define MACHINE_FLAG_LPP	_BITUL(9)
+#define MACHINE_FLAG_TOPOLOGY	_BITUL(10)
+#define MACHINE_FLAG_TE		_BITUL(11)
+#define MACHINE_FLAG_TLB_LC	_BITUL(12)
+#define MACHINE_FLAG_VX		_BITUL(13)
+#define MACHINE_FLAG_CAD	_BITUL(14)
 
 #define LPP_MAGIC		_BITUL(31)
 #define LPP_PFAULT_PID_MASK	_AC(0xffffffff, UL)
@@ -104,6 +101,8 @@ extern void pfault_fini(void);
 #define pfault_fini()		do { } while (0)
 #endif /* CONFIG_PFAULT */
 
+void report_user_fault(struct pt_regs *regs, long signr, int is_mm_fault);
+
 extern void cmma_init(void);
 
 extern void (*_machine_restart)(char *command);
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 5df26b11cf47..0cc383b9be7f 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -18,6 +18,7 @@
 extern struct mutex smp_cpu_state_mutex;
 extern unsigned int smp_cpu_mt_shift;
 extern unsigned int smp_cpu_mtid;
+extern __vector128 __initdata boot_cpu_vector_save_area[__NUM_VXRS];
 
 extern int __cpu_up(unsigned int cpu, struct task_struct *tidle);
 
@@ -55,7 +56,6 @@ static inline int smp_store_status(int cpu) { return 0; }
 static inline int smp_vcpu_scheduled(int cpu) { return 1; }
 static inline void smp_yield_cpu(int cpu) { }
 static inline void smp_fill_possible_mask(void) { }
-static inline void smp_save_dump_cpus(void) { }
 
 #endif /* CONFIG_SMP */
 
diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h
index f7054a892d9e..2728114d5484 100644
--- a/arch/s390/include/asm/sysinfo.h
+++ b/arch/s390/include/asm/sysinfo.h
@@ -56,7 +56,12 @@ struct sysinfo_1_2_2 {
 	char format;
 	char reserved_0[1];
 	unsigned short acc_offset;
-	char reserved_1[20];
+	unsigned char mt_installed :1;
+	unsigned char :2;
+	unsigned char mt_stid :5;
+	unsigned char :3;
+	unsigned char mt_gtid :5;
+	char reserved_1[18];
 	unsigned int nominal_cap;
 	unsigned int secondary_cap;
 	unsigned int capability;
@@ -92,9 +97,13 @@ struct sysinfo_2_2_2 {
 	char name[8];
 	unsigned int caf;
 	char reserved_2[8];
-	unsigned char mt_installed;
-	unsigned char mt_general;
-	unsigned char mt_psmtid;
+	unsigned char mt_installed :1;
+	unsigned char :2;
+	unsigned char mt_stid :5;
+	unsigned char :3;
+	unsigned char mt_gtid :5;
+	unsigned char :3;
+	unsigned char mt_psmtid :5;
 	char reserved_3[5];
 	unsigned short cpus_dedicated;
 	unsigned short cpus_shared;
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 692b9247c019..2fffc2c27581 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -96,6 +96,4 @@ void arch_release_task_struct(struct task_struct *tsk);
 #define _TIF_31BIT		_BITUL(TIF_31BIT)
 #define _TIF_SINGLE_STEP	_BITUL(TIF_SINGLE_STEP)
 
-#define is_32bit_task()		(test_thread_flag(TIF_31BIT))
-
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
index 94fc55fc72ce..6b53962e807e 100644
--- a/arch/s390/include/asm/topology.h
+++ b/arch/s390/include/asm/topology.h
@@ -7,7 +7,7 @@
 struct sysinfo_15_1_x;
 struct cpu;
 
-#ifdef CONFIG_SCHED_BOOK
+#ifdef CONFIG_SCHED_TOPOLOGY
 
 struct cpu_topology_s390 {
 	unsigned short thread_id;
@@ -40,13 +40,13 @@ void store_topology(struct sysinfo_15_1_x *info);
 void topology_expect_change(void);
 const struct cpumask *cpu_coregroup_mask(int cpu);
 
-#else /* CONFIG_SCHED_BOOK */
+#else /* CONFIG_SCHED_TOPOLOGY */
 
 static inline void topology_schedule_update(void) { }
 static inline int topology_cpu_init(struct cpu *cpu) { return 0; }
 static inline void topology_expect_change(void) { }
 
-#endif /* CONFIG_SCHED_BOOK */
+#endif /* CONFIG_SCHED_TOPOLOGY */
 
 #define POLARIZATION_UNKNOWN	(-1)
 #define POLARIZATION_HRZ	(0)
diff --git a/arch/s390/include/asm/trace/diag.h b/arch/s390/include/asm/trace/diag.h
index 776f307960cc..cc6cfe7889da 100644
--- a/arch/s390/include/asm/trace/diag.h
+++ b/arch/s390/include/asm/trace/diag.h
@@ -19,7 +19,7 @@
 #define TRACE_INCLUDE_PATH asm/trace
 #define TRACE_INCLUDE_FILE diag
 
-TRACE_EVENT(diagnose,
+TRACE_EVENT(s390_diagnose,
 	TP_PROTO(unsigned short nr),
 	TP_ARGS(nr),
 	TP_STRUCT__entry(
@@ -32,9 +32,9 @@ TRACE_EVENT(diagnose,
 );
 
 #ifdef CONFIG_TRACEPOINTS
-void trace_diagnose_norecursion(int diag_nr);
+void trace_s390_diagnose_norecursion(int diag_nr);
 #else
-static inline void trace_diagnose_norecursion(int diag_nr) { }
+static inline void trace_s390_diagnose_norecursion(int diag_nr) { }
 #endif
 
 #endif /* _TRACE_S390_DIAG_H */
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 9dd4cc47ddc7..e0900ddf91dd 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -79,18 +79,12 @@ struct exception_table_entry
 	int insn, fixup;
 };
 
-static inline unsigned long extable_insn(const struct exception_table_entry *x)
-{
-	return (unsigned long)&x->insn + x->insn;
-}
-
 static inline unsigned long extable_fixup(const struct exception_table_entry *x)
 {
 	return (unsigned long)&x->fixup + x->fixup;
 }
 
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
+#define ARCH_HAS_RELATIVE_EXTABLE
 
 /**
  * __copy_from_user: - Copy a block of data from user space, with less checking.
diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h
index 787acd4f9668..d0a2dbf2433d 100644
--- a/arch/s390/include/asm/vdso.h
+++ b/arch/s390/include/asm/vdso.h
@@ -38,12 +38,14 @@ struct vdso_data {
 struct vdso_per_cpu_data {
 	__u64 ectg_timer_base;
 	__u64 ectg_user_time;
+	__u32 cpu_nr;
+	__u32 node_id;
 };
 
 extern struct vdso_data *vdso_data;
 
-int vdso_alloc_per_cpu(struct _lowcore *lowcore);
-void vdso_free_per_cpu(struct _lowcore *lowcore);
+int vdso_alloc_per_cpu(struct lowcore *lowcore);
+void vdso_free_per_cpu(struct lowcore *lowcore);
 
 #endif /* __ASSEMBLY__ */
 #endif /* __S390_VDSO_H__ */
diff --git a/arch/s390/include/asm/xor.h b/arch/s390/include/asm/xor.h
index c82eb12a5b18..c988df744a70 100644
--- a/arch/s390/include/asm/xor.h
+++ b/arch/s390/include/asm/xor.h
@@ -1 +1,20 @@
-#include <asm-generic/xor.h>
+/*
+ * Optimited xor routines
+ *
+ * Copyright IBM Corp. 2016
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+#ifndef _ASM_S390_XOR_H
+#define _ASM_S390_XOR_H
+
+extern struct xor_block_template xor_block_xc;
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+do {							\
+	xor_speed(&xor_block_xc);			\
+} while (0)
+
+#define XOR_SELECT_TEMPLATE(FASTEST)	(&xor_block_xc)
+
+#endif /* _ASM_S390_XOR_H */
diff --git a/arch/s390/include/uapi/asm/clp.h b/arch/s390/include/uapi/asm/clp.h
new file mode 100644
index 000000000000..ab72d9d24373
--- /dev/null
+++ b/arch/s390/include/uapi/asm/clp.h
@@ -0,0 +1,28 @@
+/*
+ * ioctl interface for /dev/clp
+ *
+ * Copyright IBM Corp. 2016
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _ASM_CLP_H
+#define _ASM_CLP_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+struct clp_req {
+	unsigned int c : 1;
+	unsigned int r : 1;
+	unsigned int lps : 6;
+	unsigned int cmd : 8;
+	unsigned int : 16;
+	unsigned int reserved;
+	__u64 data_p;
+};
+
+#define CLP_IOCTL_MAGIC 'c'
+
+#define CLP_SYNC _IOWR(CLP_IOCTL_MAGIC, 0xC1, struct clp_req)
+
+#endif
diff --git a/arch/s390/include/uapi/asm/kvm.h b/arch/s390/include/uapi/asm/kvm.h
index ef1a5fcc6c66..347fe5afa419 100644
--- a/arch/s390/include/uapi/asm/kvm.h
+++ b/arch/s390/include/uapi/asm/kvm.h
@@ -66,6 +66,8 @@ struct kvm_s390_io_adapter_req {
 #define KVM_S390_VM_MEM_CLR_CMMA	1
 #define KVM_S390_VM_MEM_LIMIT_SIZE	2
 
+#define KVM_S390_NO_MEM_LIMIT		U64_MAX
+
 /* kvm attributes for KVM_S390_VM_TOD */
 #define KVM_S390_VM_TOD_LOW		0
 #define KVM_S390_VM_TOD_HIGH		1
@@ -151,6 +153,8 @@ struct kvm_guest_debug_arch {
 #define KVM_SYNC_ARCH0  (1UL << 4)
 #define KVM_SYNC_PFAULT (1UL << 5)
 #define KVM_SYNC_VRS    (1UL << 6)
+#define KVM_SYNC_RICCB  (1UL << 7)
+#define KVM_SYNC_FPRS   (1UL << 8)
 /* definition of registers in kvm_run */
 struct kvm_sync_regs {
 	__u64 prefix;	/* prefix register */
@@ -165,9 +169,14 @@ struct kvm_sync_regs {
 	__u64 pft;	/* pfault token [PFAULT] */
 	__u64 pfs;	/* pfault select [PFAULT] */
 	__u64 pfc;	/* pfault compare [PFAULT] */
-	__u64 vrs[32][2];	/* vector registers */
+	union {
+		__u64 vrs[32][2];	/* vector registers (KVM_SYNC_VRS) */
+		__u64 fprs[16];		/* fp registers (KVM_SYNC_FPRS) */
+	};
 	__u8  reserved[512];	/* for future vector expansion */
-	__u32 fpc;	/* only valid with vector registers */
+	__u32 fpc;		/* valid on KVM_SYNC_VRS or KVM_SYNC_FPRS */
+	__u8 padding[52];	/* riccb needs to be 64byte aligned */
+	__u8 riccb[64];		/* runtime instrumentation controls block */
 };
 
 #define KVM_REG_S390_TODPR	(KVM_REG_S390 | KVM_REG_SIZE_U32 | 0x1)
diff --git a/arch/s390/include/uapi/asm/sie.h b/arch/s390/include/uapi/asm/sie.h
index ee69c0854c88..5dbaa72baa64 100644
--- a/arch/s390/include/uapi/asm/sie.h
+++ b/arch/s390/include/uapi/asm/sie.h
@@ -7,6 +7,7 @@
 	{ 0x9c, "DIAG (0x9c) time slice end directed" },	\
 	{ 0x204, "DIAG (0x204) logical-cpu utilization" },	\
 	{ 0x258, "DIAG (0x258) page-reference services" },	\
+	{ 0x288, "DIAG (0x288) watchdog functions" },		\
 	{ 0x308, "DIAG (0x308) ipl functions" },		\
 	{ 0x500, "DIAG (0x500) KVM virtio functions" },		\
 	{ 0x501, "DIAG (0x501) KVM breakpoint" }
diff --git a/arch/s390/include/uapi/asm/socket.h b/arch/s390/include/uapi/asm/socket.h
index 296942d56e6a..41b51c2f4f1b 100644
--- a/arch/s390/include/uapi/asm/socket.h
+++ b/arch/s390/include/uapi/asm/socket.h
@@ -91,4 +91,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/uapi/asm/unistd.h b/arch/s390/include/uapi/asm/unistd.h
index a848adba1504..4384bc797a54 100644
--- a/arch/s390/include/uapi/asm/unistd.h
+++ b/arch/s390/include/uapi/asm/unistd.h
@@ -192,14 +192,14 @@
 #define __NR_set_tid_address	252
 #define __NR_fadvise64		253
 #define __NR_timer_create	254
-#define __NR_timer_settime	(__NR_timer_create+1)
-#define __NR_timer_gettime	(__NR_timer_create+2)
-#define __NR_timer_getoverrun	(__NR_timer_create+3)
-#define __NR_timer_delete	(__NR_timer_create+4)
-#define __NR_clock_settime	(__NR_timer_create+5)
-#define __NR_clock_gettime	(__NR_timer_create+6)
-#define __NR_clock_getres	(__NR_timer_create+7)
-#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_timer_settime	255
+#define __NR_timer_gettime	256
+#define __NR_timer_getoverrun	257
+#define __NR_timer_delete	258
+#define __NR_clock_settime	259
+#define __NR_clock_gettime	260
+#define __NR_clock_getres	261
+#define __NR_clock_nanosleep	262
 /* Number 263 is reserved for vserver */
 #define __NR_statfs64		265
 #define __NR_fstatfs64		266
@@ -309,7 +309,11 @@
 #define __NR_recvfrom		371
 #define __NR_recvmsg		372
 #define __NR_shutdown		373
-#define NR_syscalls 374
+#define __NR_mlock2		374
+#define __NR_copy_file_range	375
+#define __NR_preadv2		376
+#define __NR_pwritev2		377
+#define NR_syscalls 378
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index dc167a23b920..2f5586ab8a6a 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -34,8 +34,10 @@ CFLAGS_sysinfo.o += -w
 #
 CFLAGS_REMOVE_sclp.o = $(CC_FLAGS_FTRACE)
 ifneq ($(CC_FLAGS_MARCH),-march=z900)
-CFLAGS_REMOVE_sclp.o += $(CC_FLAGS_MARCH)
-CFLAGS_sclp.o	+= -march=z900
+CFLAGS_REMOVE_sclp.o	+= $(CC_FLAGS_MARCH)
+CFLAGS_sclp.o		+= -march=z900
+AFLAGS_REMOVE_head.o	+= $(CC_FLAGS_MARCH)
+AFLAGS_head.o		+= -march=z900
 endif
 GCOV_PROFILE_sclp.o := n
 
@@ -50,7 +52,7 @@ extra-y				+= head.o head64.o vmlinux.lds
 
 obj-$(CONFIG_MODULES)		+= s390_ksyms.o module.o
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_SCHED_BOOK)	+= topology.o
+obj-$(CONFIG_SCHED_TOPOLOGY)	+= topology.o
 obj-$(CONFIG_HIBERNATION)	+= suspend.o swsusp.o
 obj-$(CONFIG_AUDIT)		+= audit.o
 compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 9cd248f637c7..1f95cc1faeb7 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -12,6 +12,7 @@
 #include <asm/idle.h>
 #include <asm/vdso.h>
 #include <asm/pgtable.h>
+#include <asm/gmap.h>
 
 /*
  * Make sure that the compiler is new enough. We want a compiler that
@@ -80,6 +81,8 @@ int main(void)
 	OFFSET(__VDSO_TK_SHIFT, vdso_data, tk_shift);
 	OFFSET(__VDSO_ECTG_BASE, vdso_per_cpu_data, ectg_timer_base);
 	OFFSET(__VDSO_ECTG_USER, vdso_per_cpu_data, ectg_user_time);
+	OFFSET(__VDSO_CPU_NR, vdso_per_cpu_data, cpu_nr);
+	OFFSET(__VDSO_NODE_ID, vdso_per_cpu_data, node_id);
 	BLANK();
 	/* constants used by the vdso */
 	DEFINE(__CLOCK_REALTIME, CLOCK_REALTIME);
@@ -97,95 +100,96 @@ int main(void)
 	OFFSET(__TIMER_IDLE_EXIT, s390_idle_data, timer_idle_exit);
 	BLANK();
 	/* hardware defined lowcore locations 0x000 - 0x1ff */
-	OFFSET(__LC_EXT_PARAMS, _lowcore, ext_params);
-	OFFSET(__LC_EXT_CPU_ADDR, _lowcore, ext_cpu_addr);
-	OFFSET(__LC_EXT_INT_CODE, _lowcore, ext_int_code);
-	OFFSET(__LC_SVC_ILC, _lowcore, svc_ilc);
-	OFFSET(__LC_SVC_INT_CODE, _lowcore, svc_code);
-	OFFSET(__LC_PGM_ILC, _lowcore, pgm_ilc);
-	OFFSET(__LC_PGM_INT_CODE, _lowcore, pgm_code);
-	OFFSET(__LC_DATA_EXC_CODE, _lowcore, data_exc_code);
-	OFFSET(__LC_MON_CLASS_NR, _lowcore, mon_class_num);
-	OFFSET(__LC_PER_CODE, _lowcore, per_code);
-	OFFSET(__LC_PER_ATMID, _lowcore, per_atmid);
-	OFFSET(__LC_PER_ADDRESS, _lowcore, per_address);
-	OFFSET(__LC_EXC_ACCESS_ID, _lowcore, exc_access_id);
-	OFFSET(__LC_PER_ACCESS_ID, _lowcore, per_access_id);
-	OFFSET(__LC_OP_ACCESS_ID, _lowcore, op_access_id);
-	OFFSET(__LC_AR_MODE_ID, _lowcore, ar_mode_id);
-	OFFSET(__LC_TRANS_EXC_CODE, _lowcore, trans_exc_code);
-	OFFSET(__LC_MON_CODE, _lowcore, monitor_code);
-	OFFSET(__LC_SUBCHANNEL_ID, _lowcore, subchannel_id);
-	OFFSET(__LC_SUBCHANNEL_NR, _lowcore, subchannel_nr);
-	OFFSET(__LC_IO_INT_PARM, _lowcore, io_int_parm);
-	OFFSET(__LC_IO_INT_WORD, _lowcore, io_int_word);
-	OFFSET(__LC_STFL_FAC_LIST, _lowcore, stfl_fac_list);
-	OFFSET(__LC_MCCK_CODE, _lowcore, mcck_interruption_code);
-	OFFSET(__LC_MCCK_FAIL_STOR_ADDR, _lowcore, failing_storage_address);
-	OFFSET(__LC_LAST_BREAK, _lowcore, breaking_event_addr);
-	OFFSET(__LC_RST_OLD_PSW, _lowcore, restart_old_psw);
-	OFFSET(__LC_EXT_OLD_PSW, _lowcore, external_old_psw);
-	OFFSET(__LC_SVC_OLD_PSW, _lowcore, svc_old_psw);
-	OFFSET(__LC_PGM_OLD_PSW, _lowcore, program_old_psw);
-	OFFSET(__LC_MCK_OLD_PSW, _lowcore, mcck_old_psw);
-	OFFSET(__LC_IO_OLD_PSW, _lowcore, io_old_psw);
-	OFFSET(__LC_RST_NEW_PSW, _lowcore, restart_psw);
-	OFFSET(__LC_EXT_NEW_PSW, _lowcore, external_new_psw);
-	OFFSET(__LC_SVC_NEW_PSW, _lowcore, svc_new_psw);
-	OFFSET(__LC_PGM_NEW_PSW, _lowcore, program_new_psw);
-	OFFSET(__LC_MCK_NEW_PSW, _lowcore, mcck_new_psw);
-	OFFSET(__LC_IO_NEW_PSW, _lowcore, io_new_psw);
+	OFFSET(__LC_EXT_PARAMS, lowcore, ext_params);
+	OFFSET(__LC_EXT_CPU_ADDR, lowcore, ext_cpu_addr);
+	OFFSET(__LC_EXT_INT_CODE, lowcore, ext_int_code);
+	OFFSET(__LC_SVC_ILC, lowcore, svc_ilc);
+	OFFSET(__LC_SVC_INT_CODE, lowcore, svc_code);
+	OFFSET(__LC_PGM_ILC, lowcore, pgm_ilc);
+	OFFSET(__LC_PGM_INT_CODE, lowcore, pgm_code);
+	OFFSET(__LC_DATA_EXC_CODE, lowcore, data_exc_code);
+	OFFSET(__LC_MON_CLASS_NR, lowcore, mon_class_num);
+	OFFSET(__LC_PER_CODE, lowcore, per_code);
+	OFFSET(__LC_PER_ATMID, lowcore, per_atmid);
+	OFFSET(__LC_PER_ADDRESS, lowcore, per_address);
+	OFFSET(__LC_EXC_ACCESS_ID, lowcore, exc_access_id);
+	OFFSET(__LC_PER_ACCESS_ID, lowcore, per_access_id);
+	OFFSET(__LC_OP_ACCESS_ID, lowcore, op_access_id);
+	OFFSET(__LC_AR_MODE_ID, lowcore, ar_mode_id);
+	OFFSET(__LC_TRANS_EXC_CODE, lowcore, trans_exc_code);
+	OFFSET(__LC_MON_CODE, lowcore, monitor_code);
+	OFFSET(__LC_SUBCHANNEL_ID, lowcore, subchannel_id);
+	OFFSET(__LC_SUBCHANNEL_NR, lowcore, subchannel_nr);
+	OFFSET(__LC_IO_INT_PARM, lowcore, io_int_parm);
+	OFFSET(__LC_IO_INT_WORD, lowcore, io_int_word);
+	OFFSET(__LC_STFL_FAC_LIST, lowcore, stfl_fac_list);
+	OFFSET(__LC_STFLE_FAC_LIST, lowcore, stfle_fac_list);
+	OFFSET(__LC_MCCK_CODE, lowcore, mcck_interruption_code);
+	OFFSET(__LC_MCCK_FAIL_STOR_ADDR, lowcore, failing_storage_address);
+	OFFSET(__LC_LAST_BREAK, lowcore, breaking_event_addr);
+	OFFSET(__LC_RST_OLD_PSW, lowcore, restart_old_psw);
+	OFFSET(__LC_EXT_OLD_PSW, lowcore, external_old_psw);
+	OFFSET(__LC_SVC_OLD_PSW, lowcore, svc_old_psw);
+	OFFSET(__LC_PGM_OLD_PSW, lowcore, program_old_psw);
+	OFFSET(__LC_MCK_OLD_PSW, lowcore, mcck_old_psw);
+	OFFSET(__LC_IO_OLD_PSW, lowcore, io_old_psw);
+	OFFSET(__LC_RST_NEW_PSW, lowcore, restart_psw);
+	OFFSET(__LC_EXT_NEW_PSW, lowcore, external_new_psw);
+	OFFSET(__LC_SVC_NEW_PSW, lowcore, svc_new_psw);
+	OFFSET(__LC_PGM_NEW_PSW, lowcore, program_new_psw);
+	OFFSET(__LC_MCK_NEW_PSW, lowcore, mcck_new_psw);
+	OFFSET(__LC_IO_NEW_PSW, lowcore, io_new_psw);
 	/* software defined lowcore locations 0x200 - 0xdff*/
-	OFFSET(__LC_SAVE_AREA_SYNC, _lowcore, save_area_sync);
-	OFFSET(__LC_SAVE_AREA_ASYNC, _lowcore, save_area_async);
-	OFFSET(__LC_SAVE_AREA_RESTART, _lowcore, save_area_restart);
-	OFFSET(__LC_CPU_FLAGS, _lowcore, cpu_flags);
-	OFFSET(__LC_RETURN_PSW, _lowcore, return_psw);
-	OFFSET(__LC_RETURN_MCCK_PSW, _lowcore, return_mcck_psw);
-	OFFSET(__LC_SYNC_ENTER_TIMER, _lowcore, sync_enter_timer);
-	OFFSET(__LC_ASYNC_ENTER_TIMER, _lowcore, async_enter_timer);
-	OFFSET(__LC_MCCK_ENTER_TIMER, _lowcore, mcck_enter_timer);
-	OFFSET(__LC_EXIT_TIMER, _lowcore, exit_timer);
-	OFFSET(__LC_USER_TIMER, _lowcore, user_timer);
-	OFFSET(__LC_SYSTEM_TIMER, _lowcore, system_timer);
-	OFFSET(__LC_STEAL_TIMER, _lowcore, steal_timer);
-	OFFSET(__LC_LAST_UPDATE_TIMER, _lowcore, last_update_timer);
-	OFFSET(__LC_LAST_UPDATE_CLOCK, _lowcore, last_update_clock);
-	OFFSET(__LC_INT_CLOCK, _lowcore, int_clock);
-	OFFSET(__LC_MCCK_CLOCK, _lowcore, mcck_clock);
-	OFFSET(__LC_CURRENT, _lowcore, current_task);
-	OFFSET(__LC_THREAD_INFO, _lowcore, thread_info);
-	OFFSET(__LC_KERNEL_STACK, _lowcore, kernel_stack);
-	OFFSET(__LC_ASYNC_STACK, _lowcore, async_stack);
-	OFFSET(__LC_PANIC_STACK, _lowcore, panic_stack);
-	OFFSET(__LC_RESTART_STACK, _lowcore, restart_stack);
-	OFFSET(__LC_RESTART_FN, _lowcore, restart_fn);
-	OFFSET(__LC_RESTART_DATA, _lowcore, restart_data);
-	OFFSET(__LC_RESTART_SOURCE, _lowcore, restart_source);
-	OFFSET(__LC_USER_ASCE, _lowcore, user_asce);
-	OFFSET(__LC_LPP, _lowcore, lpp);
-	OFFSET(__LC_CURRENT_PID, _lowcore, current_pid);
-	OFFSET(__LC_PERCPU_OFFSET, _lowcore, percpu_offset);
-	OFFSET(__LC_VDSO_PER_CPU, _lowcore, vdso_per_cpu_data);
-	OFFSET(__LC_MACHINE_FLAGS, _lowcore, machine_flags);
-	OFFSET(__LC_GMAP, _lowcore, gmap);
-	OFFSET(__LC_PASTE, _lowcore, paste);
+	OFFSET(__LC_SAVE_AREA_SYNC, lowcore, save_area_sync);
+	OFFSET(__LC_SAVE_AREA_ASYNC, lowcore, save_area_async);
+	OFFSET(__LC_SAVE_AREA_RESTART, lowcore, save_area_restart);
+	OFFSET(__LC_CPU_FLAGS, lowcore, cpu_flags);
+	OFFSET(__LC_RETURN_PSW, lowcore, return_psw);
+	OFFSET(__LC_RETURN_MCCK_PSW, lowcore, return_mcck_psw);
+	OFFSET(__LC_SYNC_ENTER_TIMER, lowcore, sync_enter_timer);
+	OFFSET(__LC_ASYNC_ENTER_TIMER, lowcore, async_enter_timer);
+	OFFSET(__LC_MCCK_ENTER_TIMER, lowcore, mcck_enter_timer);
+	OFFSET(__LC_EXIT_TIMER, lowcore, exit_timer);
+	OFFSET(__LC_USER_TIMER, lowcore, user_timer);
+	OFFSET(__LC_SYSTEM_TIMER, lowcore, system_timer);
+	OFFSET(__LC_STEAL_TIMER, lowcore, steal_timer);
+	OFFSET(__LC_LAST_UPDATE_TIMER, lowcore, last_update_timer);
+	OFFSET(__LC_LAST_UPDATE_CLOCK, lowcore, last_update_clock);
+	OFFSET(__LC_INT_CLOCK, lowcore, int_clock);
+	OFFSET(__LC_MCCK_CLOCK, lowcore, mcck_clock);
+	OFFSET(__LC_CURRENT, lowcore, current_task);
+	OFFSET(__LC_THREAD_INFO, lowcore, thread_info);
+	OFFSET(__LC_KERNEL_STACK, lowcore, kernel_stack);
+	OFFSET(__LC_ASYNC_STACK, lowcore, async_stack);
+	OFFSET(__LC_PANIC_STACK, lowcore, panic_stack);
+	OFFSET(__LC_RESTART_STACK, lowcore, restart_stack);
+	OFFSET(__LC_RESTART_FN, lowcore, restart_fn);
+	OFFSET(__LC_RESTART_DATA, lowcore, restart_data);
+	OFFSET(__LC_RESTART_SOURCE, lowcore, restart_source);
+	OFFSET(__LC_USER_ASCE, lowcore, user_asce);
+	OFFSET(__LC_LPP, lowcore, lpp);
+	OFFSET(__LC_CURRENT_PID, lowcore, current_pid);
+	OFFSET(__LC_PERCPU_OFFSET, lowcore, percpu_offset);
+	OFFSET(__LC_VDSO_PER_CPU, lowcore, vdso_per_cpu_data);
+	OFFSET(__LC_MACHINE_FLAGS, lowcore, machine_flags);
+	OFFSET(__LC_GMAP, lowcore, gmap);
+	OFFSET(__LC_PASTE, lowcore, paste);
 	/* software defined ABI-relevant lowcore locations 0xe00 - 0xe20 */
-	OFFSET(__LC_DUMP_REIPL, _lowcore, ipib);
+	OFFSET(__LC_DUMP_REIPL, lowcore, ipib);
 	/* hardware defined lowcore locations 0x1000 - 0x18ff */
-	OFFSET(__LC_VX_SAVE_AREA_ADDR, _lowcore, vector_save_area_addr);
-	OFFSET(__LC_EXT_PARAMS2, _lowcore, ext_params2);
-	OFFSET(SAVE_AREA_BASE, _lowcore, floating_pt_save_area);
-	OFFSET(__LC_FPREGS_SAVE_AREA, _lowcore, floating_pt_save_area);
-	OFFSET(__LC_GPREGS_SAVE_AREA, _lowcore, gpregs_save_area);
-	OFFSET(__LC_PSW_SAVE_AREA, _lowcore, psw_save_area);
-	OFFSET(__LC_PREFIX_SAVE_AREA, _lowcore, prefixreg_save_area);
-	OFFSET(__LC_FP_CREG_SAVE_AREA, _lowcore, fpt_creg_save_area);
-	OFFSET(__LC_CPU_TIMER_SAVE_AREA, _lowcore, cpu_timer_save_area);
-	OFFSET(__LC_CLOCK_COMP_SAVE_AREA, _lowcore, clock_comp_save_area);
-	OFFSET(__LC_AREGS_SAVE_AREA, _lowcore, access_regs_save_area);
-	OFFSET(__LC_CREGS_SAVE_AREA, _lowcore, cregs_save_area);
-	OFFSET(__LC_PGM_TDB, _lowcore, pgm_tdb);
+	OFFSET(__LC_VX_SAVE_AREA_ADDR, lowcore, vector_save_area_addr);
+	OFFSET(__LC_EXT_PARAMS2, lowcore, ext_params2);
+	OFFSET(__LC_FPREGS_SAVE_AREA, lowcore, floating_pt_save_area);
+	OFFSET(__LC_GPREGS_SAVE_AREA, lowcore, gpregs_save_area);
+	OFFSET(__LC_PSW_SAVE_AREA, lowcore, psw_save_area);
+	OFFSET(__LC_PREFIX_SAVE_AREA, lowcore, prefixreg_save_area);
+	OFFSET(__LC_FP_CREG_SAVE_AREA, lowcore, fpt_creg_save_area);
+	OFFSET(__LC_TOD_PROGREG_SAVE_AREA, lowcore, tod_progreg_save_area);
+	OFFSET(__LC_CPU_TIMER_SAVE_AREA, lowcore, cpu_timer_save_area);
+	OFFSET(__LC_CLOCK_COMP_SAVE_AREA, lowcore, clock_comp_save_area);
+	OFFSET(__LC_AREGS_SAVE_AREA, lowcore, access_regs_save_area);
+	OFFSET(__LC_CREGS_SAVE_AREA, lowcore, cregs_save_area);
+	OFFSET(__LC_PGM_TDB, lowcore, pgm_tdb);
 	BLANK();
 	/* gmap/sie offsets */
 	OFFSET(__GMAP_ASCE, gmap, asce);
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 66c94417c0ba..4af60374eba0 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -271,7 +271,7 @@ static int restore_sigregs_ext32(struct pt_regs *regs,
 
 	/* Restore high gprs from signal stack */
 	if (__copy_from_user(&gprs_high, &sregs_ext->gprs_high,
-			     sizeof(&sregs_ext->gprs_high)))
+			     sizeof(sregs_ext->gprs_high)))
 		return -EFAULT;
 	for (i = 0; i < NUM_GPRS; i++)
 		*(__u32 *)&regs->gprs[i] = gprs_high[i];
diff --git a/arch/s390/kernel/compat_wrapper.c b/arch/s390/kernel/compat_wrapper.c
index 09f194052df3..ae2cda5eee5a 100644
--- a/arch/s390/kernel/compat_wrapper.c
+++ b/arch/s390/kernel/compat_wrapper.c
@@ -176,3 +176,5 @@ COMPAT_SYSCALL_WRAP4(accept4, int, fd, struct sockaddr __user *, upeer_sockaddr,
 COMPAT_SYSCALL_WRAP3(getsockname, int, fd, struct sockaddr __user *, usockaddr, int __user *, usockaddr_len);
 COMPAT_SYSCALL_WRAP3(getpeername, int, fd, struct sockaddr __user *, usockaddr, int __user *, usockaddr_len);
 COMPAT_SYSCALL_WRAP6(sendto, int, fd, void __user *, buff, size_t, len, unsigned int, flags, struct sockaddr __user *, addr, int, addr_len);
+COMPAT_SYSCALL_WRAP3(mlock2, unsigned long, start, size_t, len, int, flags);
+COMPAT_SYSCALL_WRAP6(copy_file_range, int, fd_in, loff_t __user *, off_in, int, fd_out, loff_t __user *, off_out, size_t, len, unsigned int, flags);
diff --git a/arch/s390/kernel/cpcmd.c b/arch/s390/kernel/cpcmd.c
index 7f768914fb4f..7f48e568ac64 100644
--- a/arch/s390/kernel/cpcmd.c
+++ b/arch/s390/kernel/cpcmd.c
@@ -96,8 +96,7 @@ int cpcmd(const char *cmd, char *response, int rlen, int *response_code)
 			(((unsigned long)response + rlen) >> 31)) {
 		lowbuf = kmalloc(rlen, GFP_KERNEL | GFP_DMA);
 		if (!lowbuf) {
-			pr_warning("The cpcmd kernel function failed to "
-				   "allocate a response buffer\n");
+			pr_warn("The cpcmd kernel function failed to allocate a response buffer\n");
 			return -ENOMEM;
 		}
 		spin_lock_irqsave(&cpcmd_lock, flags);
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index 171e09bb8ea2..3986c9f62191 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/bootmem.h>
 #include <linux/elf.h>
+#include <asm/asm-offsets.h>
 #include <linux/memblock.h>
 #include <asm/os_info.h>
 #include <asm/elf.h>
@@ -32,7 +33,82 @@ static struct memblock_type oldmem_type = {
 	.regions = &oldmem_region,
 };
 
-struct dump_save_areas dump_save_areas;
+struct save_area {
+	struct list_head list;
+	u64 psw[2];
+	u64 ctrs[16];
+	u64 gprs[16];
+	u32 acrs[16];
+	u64 fprs[16];
+	u32 fpc;
+	u32 prefix;
+	u64 todpreg;
+	u64 timer;
+	u64 todcmp;
+	u64 vxrs_low[16];
+	__vector128 vxrs_high[16];
+};
+
+static LIST_HEAD(dump_save_areas);
+
+/*
+ * Allocate a save area
+ */
+struct save_area * __init save_area_alloc(bool is_boot_cpu)
+{
+	struct save_area *sa;
+
+	sa = (void *) memblock_alloc(sizeof(*sa), 8);
+	if (is_boot_cpu)
+		list_add(&sa->list, &dump_save_areas);
+	else
+		list_add_tail(&sa->list, &dump_save_areas);
+	return sa;
+}
+
+/*
+ * Return the address of the save area for the boot CPU
+ */
+struct save_area * __init save_area_boot_cpu(void)
+{
+	if (list_empty(&dump_save_areas))
+		return NULL;
+	return list_first_entry(&dump_save_areas, struct save_area, list);
+}
+
+/*
+ * Copy CPU registers into the save area
+ */
+void __init save_area_add_regs(struct save_area *sa, void *regs)
+{
+	struct lowcore *lc;
+
+	lc = (struct lowcore *)(regs - __LC_FPREGS_SAVE_AREA);
+	memcpy(&sa->psw, &lc->psw_save_area, sizeof(sa->psw));
+	memcpy(&sa->ctrs, &lc->cregs_save_area, sizeof(sa->ctrs));
+	memcpy(&sa->gprs, &lc->gpregs_save_area, sizeof(sa->gprs));
+	memcpy(&sa->acrs, &lc->access_regs_save_area, sizeof(sa->acrs));
+	memcpy(&sa->fprs, &lc->floating_pt_save_area, sizeof(sa->fprs));
+	memcpy(&sa->fpc, &lc->fpt_creg_save_area, sizeof(sa->fpc));
+	memcpy(&sa->prefix, &lc->prefixreg_save_area, sizeof(sa->prefix));
+	memcpy(&sa->todpreg, &lc->tod_progreg_save_area, sizeof(sa->todpreg));
+	memcpy(&sa->timer, &lc->cpu_timer_save_area, sizeof(sa->timer));
+	memcpy(&sa->todcmp, &lc->clock_comp_save_area, sizeof(sa->todcmp));
+}
+
+/*
+ * Copy vector registers into the save area
+ */
+void __init save_area_add_vxrs(struct save_area *sa, __vector128 *vxrs)
+{
+	int i;
+
+	/* Copy lower halves of vector registers 0-15 */
+	for (i = 0; i < 16; i++)
+		memcpy(&sa->vxrs_low[i], &vxrs[i].u[2], 8);
+	/* Copy vector registers 16-31 */
+	memcpy(sa->vxrs_high, vxrs + 16, 16 * sizeof(__vector128));
+}
 
 /*
  * Return physical address for virtual address
@@ -51,79 +127,85 @@ static inline void *load_real_addr(void *addr)
 }
 
 /*
- * Copy real to virtual or real memory
- */
-static int copy_from_realmem(void *dest, void *src, size_t count)
-{
-	unsigned long size;
-
-	if (!count)
-		return 0;
-	if (!is_vmalloc_or_module_addr(dest))
-		return memcpy_real(dest, src, count);
-	do {
-		size = min(count, PAGE_SIZE - (__pa(dest) & ~PAGE_MASK));
-		if (memcpy_real(load_real_addr(dest), src, size))
-			return -EFAULT;
-		count -= size;
-		dest += size;
-		src += size;
-	} while (count);
-	return 0;
-}
-
-/*
- * Pointer to ELF header in new kernel
+ * Copy memory of the old, dumped system to a kernel space virtual address
  */
-static void *elfcorehdr_newmem;
-
-/*
- * Copy one page from zfcpdump "oldmem"
- *
- * For pages below HSA size memory from the HSA is copied. Otherwise
- * real memory copy is used.
- */
-static ssize_t copy_oldmem_page_zfcpdump(char *buf, size_t csize,
-					 unsigned long src, int userbuf)
+int copy_oldmem_kernel(void *dst, void *src, size_t count)
 {
+	unsigned long from, len;
+	void *ra;
 	int rc;
 
-	if (src < sclp.hsa_size) {
-		rc = memcpy_hsa(buf, src, csize, userbuf);
-	} else {
-		if (userbuf)
-			rc = copy_to_user_real((void __force __user *) buf,
-					       (void *) src, csize);
-		else
-			rc = memcpy_real(buf, (void *) src, csize);
+	while (count) {
+		from = __pa(src);
+		if (!OLDMEM_BASE && from < sclp.hsa_size) {
+			/* Copy from zfcpdump HSA area */
+			len = min(count, sclp.hsa_size - from);
+			rc = memcpy_hsa_kernel(dst, from, len);
+			if (rc)
+				return rc;
+		} else {
+			/* Check for swapped kdump oldmem areas */
+			if (OLDMEM_BASE && from - OLDMEM_BASE < OLDMEM_SIZE) {
+				from -= OLDMEM_BASE;
+				len = min(count, OLDMEM_SIZE - from);
+			} else if (OLDMEM_BASE && from < OLDMEM_SIZE) {
+				len = min(count, OLDMEM_SIZE - from);
+				from += OLDMEM_BASE;
+			} else {
+				len = count;
+			}
+			if (is_vmalloc_or_module_addr(dst)) {
+				ra = load_real_addr(dst);
+				len = min(PAGE_SIZE - offset_in_page(ra), len);
+			} else {
+				ra = dst;
+			}
+			if (memcpy_real(ra, (void *) from, len))
+				return -EFAULT;
+		}
+		dst += len;
+		src += len;
+		count -= len;
 	}
-	return rc ? rc : csize;
+	return 0;
 }
 
 /*
- * Copy one page from kdump "oldmem"
- *
- * For the kdump reserved memory this functions performs a swap operation:
- *  - [OLDMEM_BASE - OLDMEM_BASE + OLDMEM_SIZE] is mapped to [0 - OLDMEM_SIZE].
- *  - [0 - OLDMEM_SIZE] is mapped to [OLDMEM_BASE - OLDMEM_BASE + OLDMEM_SIZE]
+ * Copy memory of the old, dumped system to a user space virtual address
  */
-static ssize_t copy_oldmem_page_kdump(char *buf, size_t csize,
-				      unsigned long src, int userbuf)
-
+int copy_oldmem_user(void __user *dst, void *src, size_t count)
 {
+	unsigned long from, len;
 	int rc;
 
-	if (src < OLDMEM_SIZE)
-		src += OLDMEM_BASE;
-	else if (src > OLDMEM_BASE &&
-		 src < OLDMEM_BASE + OLDMEM_SIZE)
-		src -= OLDMEM_BASE;
-	if (userbuf)
-		rc = copy_to_user_real((void __force __user *) buf,
-				       (void *) src, csize);
-	else
-		rc = copy_from_realmem(buf, (void *) src, csize);
-	return (rc == 0) ? rc : csize;
+	while (count) {
+		from = __pa(src);
+		if (!OLDMEM_BASE && from < sclp.hsa_size) {
+			/* Copy from zfcpdump HSA area */
+			len = min(count, sclp.hsa_size - from);
+			rc = memcpy_hsa_user(dst, from, len);
+			if (rc)
+				return rc;
+		} else {
+			/* Check for swapped kdump oldmem areas */
+			if (OLDMEM_BASE && from - OLDMEM_BASE < OLDMEM_SIZE) {
+				from -= OLDMEM_BASE;
+				len = min(count, OLDMEM_SIZE - from);
+			} else if (OLDMEM_BASE && from < OLDMEM_SIZE) {
+				len = min(count, OLDMEM_SIZE - from);
+				from += OLDMEM_BASE;
+			} else {
+				len = count;
+			}
+			rc = copy_to_user_real(dst, (void *) from, count);
+			if (rc)
+				return rc;
+		}
+		dst += len;
+		src += len;
+		count -= len;
+	}
+	return 0;
 }
 
 /*
@@ -132,15 +214,17 @@ static ssize_t copy_oldmem_page_kdump(char *buf, size_t csize,
 ssize_t copy_oldmem_page(unsigned long pfn, char *buf, size_t csize,
 			 unsigned long offset, int userbuf)
 {
-	unsigned long src;
+	void *src;
+	int rc;
 
 	if (!csize)
 		return 0;
-	src = (pfn << PAGE_SHIFT) + offset;
-	if (OLDMEM_BASE)
-		return copy_oldmem_page_kdump(buf, csize, src, userbuf);
+	src = (void *) (pfn << PAGE_SHIFT) + offset;
+	if (userbuf)
+		rc = copy_oldmem_user((void __force __user *) buf, src, csize);
 	else
-		return copy_oldmem_page_zfcpdump(buf, csize, src, userbuf);
+		rc = copy_oldmem_kernel((void *) buf, src, csize);
+	return rc;
 }
 
 /*
@@ -209,33 +293,6 @@ int remap_oldmem_pfn_range(struct vm_area_struct *vma, unsigned long from,
 }
 
 /*
- * Copy memory from old kernel
- */
-int copy_from_oldmem(void *dest, void *src, size_t count)
-{
-	unsigned long copied = 0;
-	int rc;
-
-	if (OLDMEM_BASE) {
-		if ((unsigned long) src < OLDMEM_SIZE) {
-			copied = min(count, OLDMEM_SIZE - (unsigned long) src);
-			rc = copy_from_realmem(dest, src + OLDMEM_BASE, copied);
-			if (rc)
-				return rc;
-		}
-	} else {
-		unsigned long hsa_end = sclp.hsa_size;
-		if ((unsigned long) src < hsa_end) {
-			copied = min(count, hsa_end - (unsigned long) src);
-			rc = memcpy_hsa(dest, (unsigned long) src, copied, 0);
-			if (rc)
-				return rc;
-		}
-	}
-	return copy_from_realmem(dest + copied, src + copied, count - copied);
-}
-
-/*
  * Alloc memory and panic in case of ENOMEM
  */
 static void *kzalloc_panic(int len)
@@ -251,8 +308,8 @@ static void *kzalloc_panic(int len)
 /*
  * Initialize ELF note
  */
-static void *nt_init(void *buf, Elf64_Word type, void *desc, int d_len,
-		     const char *name)
+static void *nt_init_name(void *buf, Elf64_Word type, void *desc, int d_len,
+			  const char *name)
 {
 	Elf64_Nhdr *note;
 	u64 len;
@@ -272,136 +329,42 @@ static void *nt_init(void *buf, Elf64_Word type, void *desc, int d_len,
 	return PTR_ADD(buf, len);
 }
 
-/*
- * Initialize prstatus note
- */
-static void *nt_prstatus(void *ptr, struct save_area *sa)
+static inline void *nt_init(void *buf, Elf64_Word type, void *desc, int d_len)
 {
-	struct elf_prstatus nt_prstatus;
-	static int cpu_nr = 1;
-
-	memset(&nt_prstatus, 0, sizeof(nt_prstatus));
-	memcpy(&nt_prstatus.pr_reg.gprs, sa->gp_regs, sizeof(sa->gp_regs));
-	memcpy(&nt_prstatus.pr_reg.psw, sa->psw, sizeof(sa->psw));
-	memcpy(&nt_prstatus.pr_reg.acrs, sa->acc_regs, sizeof(sa->acc_regs));
-	nt_prstatus.pr_pid = cpu_nr;
-	cpu_nr++;
-
-	return nt_init(ptr, NT_PRSTATUS, &nt_prstatus, sizeof(nt_prstatus),
-			 "CORE");
+	return nt_init_name(buf, type, desc, d_len, KEXEC_CORE_NOTE_NAME);
 }
 
 /*
- * Initialize fpregset (floating point) note
+ * Fill ELF notes for one CPU with save area registers
  */
-static void *nt_fpregset(void *ptr, struct save_area *sa)
+static void *fill_cpu_elf_notes(void *ptr, int cpu, struct save_area *sa)
 {
+	struct elf_prstatus nt_prstatus;
 	elf_fpregset_t nt_fpregset;
 
+	/* Prepare prstatus note */
+	memset(&nt_prstatus, 0, sizeof(nt_prstatus));
+	memcpy(&nt_prstatus.pr_reg.gprs, sa->gprs, sizeof(sa->gprs));
+	memcpy(&nt_prstatus.pr_reg.psw, sa->psw, sizeof(sa->psw));
+	memcpy(&nt_prstatus.pr_reg.acrs, sa->acrs, sizeof(sa->acrs));
+	nt_prstatus.pr_pid = cpu;
+	/* Prepare fpregset (floating point) note */
 	memset(&nt_fpregset, 0, sizeof(nt_fpregset));
-	memcpy(&nt_fpregset.fpc, &sa->fp_ctrl_reg, sizeof(sa->fp_ctrl_reg));
-	memcpy(&nt_fpregset.fprs, &sa->fp_regs, sizeof(sa->fp_regs));
-
-	return nt_init(ptr, NT_PRFPREG, &nt_fpregset, sizeof(nt_fpregset),
-		       "CORE");
-}
-
-/*
- * Initialize timer note
- */
-static void *nt_s390_timer(void *ptr, struct save_area *sa)
-{
-	return nt_init(ptr, NT_S390_TIMER, &sa->timer, sizeof(sa->timer),
-			 KEXEC_CORE_NOTE_NAME);
-}
-
-/*
- * Initialize TOD clock comparator note
- */
-static void *nt_s390_tod_cmp(void *ptr, struct save_area *sa)
-{
-	return nt_init(ptr, NT_S390_TODCMP, &sa->clk_cmp,
-		       sizeof(sa->clk_cmp), KEXEC_CORE_NOTE_NAME);
-}
-
-/*
- * Initialize TOD programmable register note
- */
-static void *nt_s390_tod_preg(void *ptr, struct save_area *sa)
-{
-	return nt_init(ptr, NT_S390_TODPREG, &sa->tod_reg,
-		       sizeof(sa->tod_reg), KEXEC_CORE_NOTE_NAME);
-}
-
-/*
- * Initialize control register note
- */
-static void *nt_s390_ctrs(void *ptr, struct save_area *sa)
-{
-	return nt_init(ptr, NT_S390_CTRS, &sa->ctrl_regs,
-		       sizeof(sa->ctrl_regs), KEXEC_CORE_NOTE_NAME);
-}
-
-/*
- * Initialize prefix register note
- */
-static void *nt_s390_prefix(void *ptr, struct save_area *sa)
-{
-	return nt_init(ptr, NT_S390_PREFIX, &sa->pref_reg,
-			 sizeof(sa->pref_reg), KEXEC_CORE_NOTE_NAME);
-}
-
-/*
- * Initialize vxrs high note (full 128 bit VX registers 16-31)
- */
-static void *nt_s390_vx_high(void *ptr, __vector128 *vx_regs)
-{
-	return nt_init(ptr, NT_S390_VXRS_HIGH, &vx_regs[16],
-		       16 * sizeof(__vector128), KEXEC_CORE_NOTE_NAME);
-}
-
-/*
- * Initialize vxrs low note (lower halves of VX registers 0-15)
- */
-static void *nt_s390_vx_low(void *ptr, __vector128 *vx_regs)
-{
-	Elf64_Nhdr *note;
-	u64 len;
-	int i;
-
-	note = (Elf64_Nhdr *)ptr;
-	note->n_namesz = strlen(KEXEC_CORE_NOTE_NAME) + 1;
-	note->n_descsz = 16 * 8;
-	note->n_type = NT_S390_VXRS_LOW;
-	len = sizeof(Elf64_Nhdr);
-
-	memcpy(ptr + len, KEXEC_CORE_NOTE_NAME, note->n_namesz);
-	len = roundup(len + note->n_namesz, 4);
-
-	ptr += len;
-	/* Copy lower halves of SIMD registers 0-15 */
-	for (i = 0; i < 16; i++) {
-		memcpy(ptr, &vx_regs[i].u[2], 8);
-		ptr += 8;
-	}
-	return ptr;
-}
-
-/*
- * Fill ELF notes for one CPU with save area registers
- */
-void *fill_cpu_elf_notes(void *ptr, struct save_area *sa, __vector128 *vx_regs)
-{
-	ptr = nt_prstatus(ptr, sa);
-	ptr = nt_fpregset(ptr, sa);
-	ptr = nt_s390_timer(ptr, sa);
-	ptr = nt_s390_tod_cmp(ptr, sa);
-	ptr = nt_s390_tod_preg(ptr, sa);
-	ptr = nt_s390_ctrs(ptr, sa);
-	ptr = nt_s390_prefix(ptr, sa);
-	if (MACHINE_HAS_VX && vx_regs) {
-		ptr = nt_s390_vx_low(ptr, vx_regs);
-		ptr = nt_s390_vx_high(ptr, vx_regs);
+	memcpy(&nt_fpregset.fpc, &sa->fpc, sizeof(sa->fpc));
+	memcpy(&nt_fpregset.fprs, &sa->fprs, sizeof(sa->fprs));
+	/* Create ELF notes for the CPU */
+	ptr = nt_init(ptr, NT_PRSTATUS, &nt_prstatus, sizeof(nt_prstatus));
+	ptr = nt_init(ptr, NT_PRFPREG, &nt_fpregset, sizeof(nt_fpregset));
+	ptr = nt_init(ptr, NT_S390_TIMER, &sa->timer, sizeof(sa->timer));
+	ptr = nt_init(ptr, NT_S390_TODCMP, &sa->todcmp, sizeof(sa->todcmp));
+	ptr = nt_init(ptr, NT_S390_TODPREG, &sa->todpreg, sizeof(sa->todpreg));
+	ptr = nt_init(ptr, NT_S390_CTRS, &sa->ctrs, sizeof(sa->ctrs));
+	ptr = nt_init(ptr, NT_S390_PREFIX, &sa->prefix, sizeof(sa->prefix));
+	if (MACHINE_HAS_VX) {
+		ptr = nt_init(ptr, NT_S390_VXRS_HIGH,
+			      &sa->vxrs_high, sizeof(sa->vxrs_high));
+		ptr = nt_init(ptr, NT_S390_VXRS_LOW,
+			      &sa->vxrs_low, sizeof(sa->vxrs_low));
 	}
 	return ptr;
 }
@@ -416,8 +379,7 @@ static void *nt_prpsinfo(void *ptr)
 	memset(&prpsinfo, 0, sizeof(prpsinfo));
 	prpsinfo.pr_sname = 'R';
 	strcpy(prpsinfo.pr_fname, "vmlinux");
-	return nt_init(ptr, NT_PRPSINFO, &prpsinfo, sizeof(prpsinfo),
-		       KEXEC_CORE_NOTE_NAME);
+	return nt_init(ptr, NT_PRPSINFO, &prpsinfo, sizeof(prpsinfo));
 }
 
 /*
@@ -429,17 +391,18 @@ static void *get_vmcoreinfo_old(unsigned long *size)
 	Elf64_Nhdr note;
 	void *addr;
 
-	if (copy_from_oldmem(&addr, &S390_lowcore.vmcore_info, sizeof(addr)))
+	if (copy_oldmem_kernel(&addr, &S390_lowcore.vmcore_info, sizeof(addr)))
 		return NULL;
 	memset(nt_name, 0, sizeof(nt_name));
-	if (copy_from_oldmem(&note, addr, sizeof(note)))
+	if (copy_oldmem_kernel(&note, addr, sizeof(note)))
 		return NULL;
-	if (copy_from_oldmem(nt_name, addr + sizeof(note), sizeof(nt_name) - 1))
+	if (copy_oldmem_kernel(nt_name, addr + sizeof(note),
+			       sizeof(nt_name) - 1))
 		return NULL;
 	if (strcmp(nt_name, "VMCOREINFO") != 0)
 		return NULL;
 	vmcoreinfo = kzalloc_panic(note.n_descsz);
-	if (copy_from_oldmem(vmcoreinfo, addr + 24, note.n_descsz))
+	if (copy_oldmem_kernel(vmcoreinfo, addr + 24, note.n_descsz))
 		return NULL;
 	*size = note.n_descsz;
 	return vmcoreinfo;
@@ -458,7 +421,7 @@ static void *nt_vmcoreinfo(void *ptr)
 		vmcoreinfo = get_vmcoreinfo_old(&size);
 	if (!vmcoreinfo)
 		return ptr;
-	return nt_init(ptr, 0, vmcoreinfo, size, "VMCOREINFO");
+	return nt_init_name(ptr, 0, vmcoreinfo, size, "VMCOREINFO");
 }
 
 /*
@@ -487,13 +450,12 @@ static void *ehdr_init(Elf64_Ehdr *ehdr, int mem_chunk_cnt)
  */
 static int get_cpu_cnt(void)
 {
-	int i, cpus = 0;
+	struct save_area *sa;
+	int cpus = 0;
 
-	for (i = 0; i < dump_save_areas.count; i++) {
-		if (dump_save_areas.areas[i]->sa.pref_reg == 0)
-			continue;
-		cpus++;
-	}
+	list_for_each_entry(sa, &dump_save_areas, list)
+		if (sa->prefix != 0)
+			cpus++;
 	return cpus;
 }
 
@@ -538,18 +500,16 @@ static void loads_init(Elf64_Phdr *phdr, u64 loads_offset)
  */
 static void *notes_init(Elf64_Phdr *phdr, void *ptr, u64 notes_offset)
 {
-	struct save_area_ext *sa_ext;
+	struct save_area *sa;
 	void *ptr_start = ptr;
-	int i;
+	int cpu;
 
 	ptr = nt_prpsinfo(ptr);
 
-	for (i = 0; i < dump_save_areas.count; i++) {
-		sa_ext = dump_save_areas.areas[i];
-		if (sa_ext->sa.pref_reg == 0)
-			continue;
-		ptr = fill_cpu_elf_notes(ptr, &sa_ext->sa, sa_ext->vx_regs);
-	}
+	cpu = 1;
+	list_for_each_entry(sa, &dump_save_areas, list)
+		if (sa->prefix != 0)
+			ptr = fill_cpu_elf_notes(ptr, cpu++, sa);
 	ptr = nt_vmcoreinfo(ptr);
 	memset(phdr, 0, sizeof(*phdr));
 	phdr->p_type = PT_NOTE;
@@ -573,9 +533,6 @@ int elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size)
 	/* If we are not in kdump or zfcpdump mode return */
 	if (!OLDMEM_BASE && ipl_info.type != IPL_TYPE_FCP_DUMP)
 		return 0;
-	/* If elfcorehdr= has been passed via cmdline, we use that one */
-	if (elfcorehdr_addr != ELFCORE_ADDR_MAX)
-		return 0;
 	/* If we cannot get HSA size for zfcpdump return error */
 	if (ipl_info.type == IPL_TYPE_FCP_DUMP && !sclp.hsa_size)
 		return -ENODEV;
@@ -606,7 +563,6 @@ int elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size)
 	hdr_off = PTR_DIFF(ptr, hdr);
 	loads_init(phdr_loads, hdr_off);
 	*addr = (unsigned long long) hdr;
-	elfcorehdr_newmem = hdr;
 	*size = (unsigned long long) hdr_off;
 	BUG_ON(elfcorehdr_size > alloc_size);
 	return 0;
@@ -617,8 +573,6 @@ int elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size)
  */
 void elfcorehdr_free(unsigned long long addr)
 {
-	if (!elfcorehdr_newmem)
-		return;
 	kfree((void *)(unsigned long)addr);
 }
 
@@ -629,7 +583,6 @@ ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos)
 {
 	void *src = (void *)(unsigned long)*ppos;
 
-	src = elfcorehdr_newmem ? src : src - OLDMEM_BASE;
 	memcpy(buf, src, count);
 	*ppos += count;
 	return count;
@@ -641,15 +594,8 @@ ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos)
 ssize_t elfcorehdr_read_notes(char *buf, size_t count, u64 *ppos)
 {
 	void *src = (void *)(unsigned long)*ppos;
-	int rc;
 
-	if (elfcorehdr_newmem) {
-		memcpy(buf, src, count);
-	} else {
-		rc = copy_from_oldmem(buf, src, count);
-		if (rc)
-			return rc;
-	}
+	memcpy(buf, src, count);
 	*ppos += count;
 	return count;
 }
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 6fca0e46464e..aa12de72fd47 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -699,8 +699,7 @@ debug_info_t *debug_register_mode(const char *name, int pages_per_area,
 	/* Since debugfs currently does not support uid/gid other than root, */
 	/* we do not allow gid/uid != 0 until we get support for that. */
 	if ((uid != 0) || (gid != 0))
-		pr_warning("Root becomes the owner of all s390dbf files "
-			   "in sysfs\n");
+		pr_warn("Root becomes the owner of all s390dbf files in sysfs\n");
 	BUG_ON(!initialized);
 	mutex_lock(&debug_mutex);
 
@@ -1307,8 +1306,7 @@ debug_input_level_fn(debug_info_t * id, struct debug_view *view,
 		new_level = debug_get_uint(str);
 	}
 	if(new_level < 0) {
-		pr_warning("%s is not a valid level for a debug "
-			   "feature\n", str);
+		pr_warn("%s is not a valid level for a debug feature\n", str);
 		rc = -EINVAL;
 	} else {
 		debug_set_level(id, new_level);
@@ -1470,7 +1468,7 @@ debug_dflt_header_fn(debug_info_t * id, struct debug_view *view,
 		except_str = "*";
 	else
 		except_str = "-";
-	caller = ((unsigned long) entry->caller) & PSW_ADDR_INSN;
+	caller = (unsigned long) entry->caller;
 	rc += sprintf(out_buf, "%02i %011lld:%06lu %1u %1s %02i %p  ",
 		      area, (long long)time_spec.tv_sec,
 		      time_spec.tv_nsec / 1000, level, except_str,
diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
index f98766ede4e1..48b37b8357e6 100644
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -121,14 +121,14 @@ device_initcall(show_diag_stat_init);
 void diag_stat_inc(enum diag_stat_enum nr)
 {
 	this_cpu_inc(diag_stat.counter[nr]);
-	trace_diagnose(diag_map[nr].code);
+	trace_s390_diagnose(diag_map[nr].code);
 }
 EXPORT_SYMBOL(diag_stat_inc);
 
 void diag_stat_inc_norecursion(enum diag_stat_enum nr)
 {
 	this_cpu_inc(diag_stat.counter[nr]);
-	trace_diagnose_norecursion(diag_map[nr].code);
+	trace_s390_diagnose_norecursion(diag_map[nr].code);
 }
 EXPORT_SYMBOL(diag_stat_inc_norecursion);
 
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index 8140d10c6785..8cb9bfdd3ea8 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -2015,7 +2015,7 @@ void show_code(struct pt_regs *regs)
 			*ptr++ = '\t';
 		ptr += print_insn(ptr, code + start, addr);
 		start += opsize;
-		printk(buffer);
+		printk("%s", buffer);
 		ptr = buffer;
 		ptr += sprintf(ptr, "\n          ");
 		hops++;
@@ -2042,7 +2042,7 @@ void print_fn_code(unsigned char *code, unsigned long len)
 		ptr += print_insn(ptr, code, (unsigned long) code);
 		*ptr++ = '\n';
 		*ptr++ = 0;
-		printk(buffer);
+		printk("%s", buffer);
 		code += opsize;
 		len -= opsize;
 	}
diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c
index dc8e20473484..1b6081c0aff9 100644
--- a/arch/s390/kernel/dumpstack.c
+++ b/arch/s390/kernel/dumpstack.c
@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/kdebug.h>
 #include <linux/ptrace.h>
+#include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <asm/processor.h>
@@ -19,76 +20,87 @@
 #include <asm/ipl.h>
 
 /*
- * For show_trace we have tree different stack to consider:
+ * For dump_trace we have tree different stack to consider:
  *   - the panic stack which is used if the kernel stack has overflown
  *   - the asynchronous interrupt stack (cpu related)
  *   - the synchronous kernel stack (process related)
- * The stack trace can start at any of the three stack and can potentially
+ * The stack trace can start at any of the three stacks and can potentially
  * touch all of them. The order is: panic stack, async stack, sync stack.
  */
 static unsigned long
-__show_trace(unsigned long sp, unsigned long low, unsigned long high)
+__dump_trace(dump_trace_func_t func, void *data, unsigned long sp,
+	     unsigned long low, unsigned long high)
 {
 	struct stack_frame *sf;
 	struct pt_regs *regs;
-	unsigned long addr;
 
 	while (1) {
-		sp = sp & PSW_ADDR_INSN;
 		if (sp < low || sp > high - sizeof(*sf))
 			return sp;
 		sf = (struct stack_frame *) sp;
-		addr = sf->gprs[8] & PSW_ADDR_INSN;
-		printk("([<%016lx>] %pSR)\n", addr, (void *)addr);
 		/* Follow the backchain. */
 		while (1) {
+			if (func(data, sf->gprs[8]))
+				return sp;
 			low = sp;
-			sp = sf->back_chain & PSW_ADDR_INSN;
+			sp = sf->back_chain;
 			if (!sp)
 				break;
 			if (sp <= low || sp > high - sizeof(*sf))
 				return sp;
 			sf = (struct stack_frame *) sp;
-			addr = sf->gprs[8] & PSW_ADDR_INSN;
-			printk(" [<%016lx>] %pSR\n", addr, (void *)addr);
 		}
 		/* Zero backchain detected, check for interrupt frame. */
 		sp = (unsigned long) (sf + 1);
 		if (sp <= low || sp > high - sizeof(*regs))
 			return sp;
 		regs = (struct pt_regs *) sp;
-		addr = regs->psw.addr & PSW_ADDR_INSN;
-		printk(" [<%016lx>] %pSR\n", addr, (void *)addr);
+		if (!user_mode(regs)) {
+			if (func(data, regs->psw.addr))
+				return sp;
+		}
 		low = sp;
 		sp = regs->gprs[15];
 	}
 }
 
-static void show_trace(struct task_struct *task, unsigned long *stack)
+void dump_trace(dump_trace_func_t func, void *data, struct task_struct *task,
+		unsigned long sp)
 {
-	const unsigned long frame_size =
-		STACK_FRAME_OVERHEAD + sizeof(struct pt_regs);
-	register unsigned long __r15 asm ("15");
-	unsigned long sp;
+	unsigned long frame_size;
 
-	sp = (unsigned long) stack;
-	if (!sp)
-		sp = task ? task->thread.ksp : __r15;
-	printk("Call Trace:\n");
+	frame_size = STACK_FRAME_OVERHEAD + sizeof(struct pt_regs);
 #ifdef CONFIG_CHECK_STACK
-	sp = __show_trace(sp,
+	sp = __dump_trace(func, data, sp,
 			  S390_lowcore.panic_stack + frame_size - 4096,
 			  S390_lowcore.panic_stack + frame_size);
 #endif
-	sp = __show_trace(sp,
+	sp = __dump_trace(func, data, sp,
 			  S390_lowcore.async_stack + frame_size - ASYNC_SIZE,
 			  S390_lowcore.async_stack + frame_size);
 	if (task)
-		__show_trace(sp, (unsigned long) task_stack_page(task),
-			     (unsigned long) task_stack_page(task) + THREAD_SIZE);
+		__dump_trace(func, data, sp,
+			     (unsigned long)task_stack_page(task),
+			     (unsigned long)task_stack_page(task) + THREAD_SIZE);
 	else
-		__show_trace(sp, S390_lowcore.thread_info,
+		__dump_trace(func, data, sp,
+			     S390_lowcore.thread_info,
 			     S390_lowcore.thread_info + THREAD_SIZE);
+}
+EXPORT_SYMBOL_GPL(dump_trace);
+
+static int show_address(void *data, unsigned long address)
+{
+	printk("([<%016lx>] %pSR)\n", address, (void *)address);
+	return 0;
+}
+
+static void show_trace(struct task_struct *task, unsigned long sp)
+{
+	if (!sp)
+		sp = task ? task->thread.ksp : current_stack_pointer();
+	printk("Call Trace:\n");
+	dump_trace(show_address, NULL, task, sp);
 	if (!task)
 		task = current;
 	debug_show_held_locks(task);
@@ -96,15 +108,16 @@ static void show_trace(struct task_struct *task, unsigned long *stack)
 
 void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	register unsigned long *__r15 asm ("15");
 	unsigned long *stack;
 	int i;
 
-	if (!sp)
-		stack = task ? (unsigned long *) task->thread.ksp : __r15;
-	else
-		stack = sp;
-
+	stack = sp;
+	if (!stack) {
+		if (!task)
+			stack = (unsigned long *)current_stack_pointer();
+		else
+			stack = (unsigned long *)task->thread.ksp;
+	}
 	for (i = 0; i < 20; i++) {
 		if (((addr_t) stack & (THREAD_SIZE-1)) == 0)
 			break;
@@ -113,7 +126,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 		printk("%016lx ", *stack++);
 	}
 	printk("\n");
-	show_trace(task, sp);
+	show_trace(task, (unsigned long)sp);
 }
 
 static void show_last_breaking_event(struct pt_regs *regs)
@@ -122,13 +135,9 @@ static void show_last_breaking_event(struct pt_regs *regs)
 	printk(" [<%016lx>] %pSR\n", regs->args[0], (void *)regs->args[0]);
 }
 
-static inline int mask_bits(struct pt_regs *regs, unsigned long bits)
-{
-	return (regs->psw.mask & bits) / ((~bits + 1) & bits);
-}
-
 void show_registers(struct pt_regs *regs)
 {
+	struct psw_bits *psw = &psw_bits(regs->psw);
 	char *mode;
 
 	mode = user_mode(regs) ? "User" : "Krnl";
@@ -137,13 +146,9 @@ void show_registers(struct pt_regs *regs)
 		printk(" (%pSR)", (void *)regs->psw.addr);
 	printk("\n");
 	printk("           R:%x T:%x IO:%x EX:%x Key:%x M:%x W:%x "
-	       "P:%x AS:%x CC:%x PM:%x", mask_bits(regs, PSW_MASK_PER),
-	       mask_bits(regs, PSW_MASK_DAT), mask_bits(regs, PSW_MASK_IO),
-	       mask_bits(regs, PSW_MASK_EXT), mask_bits(regs, PSW_MASK_KEY),
-	       mask_bits(regs, PSW_MASK_MCHECK), mask_bits(regs, PSW_MASK_WAIT),
-	       mask_bits(regs, PSW_MASK_PSTATE), mask_bits(regs, PSW_MASK_ASC),
-	       mask_bits(regs, PSW_MASK_CC), mask_bits(regs, PSW_MASK_PM));
-	printk(" EA:%x", mask_bits(regs, PSW_MASK_EA | PSW_MASK_BA));
+	       "P:%x AS:%x CC:%x PM:%x", psw->r, psw->t, psw->i, psw->e,
+	       psw->key, psw->m, psw->w, psw->p, psw->as, psw->cc, psw->pm);
+	printk(" RI:%x EA:%x", psw->ri, psw->eaba);
 	printk("\n%s GPRS: %016lx %016lx %016lx %016lx\n", mode,
 	       regs->gprs[0], regs->gprs[1], regs->gprs[2], regs->gprs[3]);
 	printk("           %016lx %016lx %016lx %016lx\n",
@@ -161,7 +166,7 @@ void show_regs(struct pt_regs *regs)
 	show_registers(regs);
 	/* Show stack backtrace if pt_regs is from kernel mode */
 	if (!user_mode(regs))
-		show_trace(NULL, (unsigned long *) regs->gprs[15]);
+		show_trace(NULL, regs->gprs[15]);
 	show_last_breaking_event(regs);
 }
 
@@ -185,9 +190,8 @@ void die(struct pt_regs *regs, const char *str)
 #ifdef CONFIG_SMP
 	printk("SMP ");
 #endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC");
-#endif
+	if (debug_pagealloc_enabled())
+		printk("DEBUG_PAGEALLOC");
 	printk("\n");
 	notify_die(DIE_OOPS, str, regs, 0, regs->int_code & 0xffff, SIGSEGV);
 	print_modules();
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 3c31609df959..a0684de5a93b 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -252,14 +252,14 @@ static void early_pgm_check_handler(void)
 	unsigned long addr;
 
 	addr = S390_lowcore.program_old_psw.addr;
-	fixup = search_exception_tables(addr & PSW_ADDR_INSN);
+	fixup = search_exception_tables(addr);
 	if (!fixup)
 		disabled_wait(0);
 	/* Disable low address protection before storing into lowcore. */
 	__ctl_store(cr0, 0, 0);
 	cr0_new = cr0 & ~(1UL << 28);
 	__ctl_load(cr0_new, 0, 0);
-	S390_lowcore.program_old_psw.addr = extable_fixup(fixup)|PSW_ADDR_AMODE;
+	S390_lowcore.program_old_psw.addr = extable_fixup(fixup);
 	__ctl_load(cr0, 0, 0);
 }
 
@@ -268,9 +268,9 @@ static noinline __init void setup_lowcore_early(void)
 	psw_t psw;
 
 	psw.mask = PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA;
-	psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_ext_handler;
+	psw.addr = (unsigned long) s390_base_ext_handler;
 	S390_lowcore.external_new_psw = psw;
-	psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
+	psw.addr = (unsigned long) s390_base_pgm_handler;
 	S390_lowcore.program_new_psw = psw;
 	s390_base_pgm_handler_fn = early_pgm_check_handler;
 }
@@ -335,6 +335,14 @@ static __init void detect_machine_facilities(void)
 	}
 }
 
+static inline void save_vector_registers(void)
+{
+#ifdef CONFIG_CRASH_DUMP
+	if (test_facility(129))
+		save_vx_regs(boot_cpu_vector_save_area);
+#endif
+}
+
 static int __init disable_vector_extension(char *str)
 {
 	S390_lowcore.machine_flags &= ~MACHINE_FLAG_VX;
@@ -440,7 +448,6 @@ void __init startup_init(void)
 	rescue_initrd();
 	clear_bss_section();
 	init_kernel_storage_key();
-	lockdep_init();
 	lockdep_off();
 	setup_lowcore_early();
 	setup_facility_list();
@@ -451,6 +458,7 @@ void __init startup_init(void)
 	detect_diag9c();
 	detect_diag44();
 	detect_machine_facilities();
+	save_vector_registers();
 	setup_topology();
 	sclp_early_detect();
 	lockdep_on();
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 857b6526d298..2d47f9cfcb36 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -186,6 +186,7 @@ ENTRY(__switch_to)
 	stg	%r5,__LC_THREAD_INFO		# store thread info of next
 	stg	%r15,__LC_KERNEL_STACK		# store end of kernel stack
 	lg	%r15,__THREAD_ksp(%r1)		# load kernel stack of next
+	/* c4 is used in guest detection: arch/s390/kernel/perf_cpum_sf.c */
 	lctl	%c4,%c4,__TASK_pid(%r3)		# load pid to control reg. 4
 	mvc	__LC_CURRENT_PID(4,%r0),__TASK_pid(%r3) # store pid of next
 	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
@@ -764,6 +765,7 @@ ENTRY(psw_idle)
 	.insn	rsy,0xeb0000000017,%r1,5,__SF_EMPTY+16(%r15)
 .Lpsw_idle_stcctm:
 #endif
+	oi	__LC_CPU_FLAGS+7,_CIF_ENABLED_WAIT
 	STCK	__CLOCK_IDLE_ENTER(%r2)
 	stpt	__TIMER_IDLE_ENTER(%r2)
 .Lpsw_idle_lpsw:
@@ -1146,6 +1148,7 @@ cleanup_critical:
 	.quad	.Lio_done - 4
 
 .Lcleanup_idle:
+	ni	__LC_CPU_FLAGS+7,255-_CIF_ENABLED_WAIT
 	# copy interrupt clock & cpu timer
 	mvc	__CLOCK_IDLE_EXIT(8,%r2),__LC_INT_CLOCK
 	mvc	__TIMER_IDLE_EXIT(8,%r2),__LC_ASYNC_ENTER_TIMER
@@ -1197,114 +1200,12 @@ cleanup_critical:
 	.quad	.Lpsw_idle_lpsw
 
 .Lcleanup_save_fpu_regs:
-	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
-	bor	%r14
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_done)
-	jhe	5f
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_fp)
-	jhe	4f
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_vx_high)
-	jhe	3f
-	clg	%r9,BASED(.Lcleanup_save_fpu_regs_vx_low)
-	jhe	2f
-	clg	%r9,BASED(.Lcleanup_save_fpu_fpc_end)
-	jhe	1f
-	lg	%r2,__LC_CURRENT
-	aghi	%r2,__TASK_thread
-0:	# Store floating-point controls
-	stfpc	__THREAD_FPU_fpc(%r2)
-1:	# Load register save area and check if VX is active
-	lg	%r3,__THREAD_FPU_regs(%r2)
-	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_VX
-	jz	4f			  # no VX -> store FP regs
-2:	# Store vector registers (V0-V15)
-	VSTM	%v0,%v15,0,%r3		  # vstm 0,15,0(3)
-3:	# Store vector registers (V16-V31)
-	VSTM	%v16,%v31,256,%r3	  # vstm 16,31,256(3)
-	j	5f			  # -> done, set CIF_FPU flag
-4:	# Store floating-point registers
-	std	0,0(%r3)
-	std	1,8(%r3)
-	std	2,16(%r3)
-	std	3,24(%r3)
-	std	4,32(%r3)
-	std	5,40(%r3)
-	std	6,48(%r3)
-	std	7,56(%r3)
-	std	8,64(%r3)
-	std	9,72(%r3)
-	std	10,80(%r3)
-	std	11,88(%r3)
-	std	12,96(%r3)
-	std	13,104(%r3)
-	std	14,112(%r3)
-	std	15,120(%r3)
-5:	# Set CIF_FPU flag
-	oi	__LC_CPU_FLAGS+7,_CIF_FPU
-	lg	%r9,48(%r11)		# return from save_fpu_regs
+	larl	%r9,save_fpu_regs
 	br	%r14
-.Lcleanup_save_fpu_fpc_end:
-	.quad	.Lsave_fpu_regs_fpc_end
-.Lcleanup_save_fpu_regs_vx_low:
-	.quad	.Lsave_fpu_regs_vx_low
-.Lcleanup_save_fpu_regs_vx_high:
-	.quad	.Lsave_fpu_regs_vx_high
-.Lcleanup_save_fpu_regs_fp:
-	.quad	.Lsave_fpu_regs_fp
-.Lcleanup_save_fpu_regs_done:
-	.quad	.Lsave_fpu_regs_done
 
 .Lcleanup_load_fpu_regs:
-	TSTMSK	__LC_CPU_FLAGS,_CIF_FPU
-	bnor	%r14
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_done)
-	jhe	1f
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_fp)
-	jhe	2f
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_vx_high)
-	jhe	3f
-	clg	%r9,BASED(.Lcleanup_load_fpu_regs_vx)
-	jhe	4f
-	lg	%r4,__LC_CURRENT
-	aghi	%r4,__TASK_thread
-	lfpc	__THREAD_FPU_fpc(%r4)
-	TSTMSK	__LC_MACHINE_FLAGS,MACHINE_FLAG_VX
-	lg	%r4,__THREAD_FPU_regs(%r4)	# %r4 <- reg save area
-	jz	2f				# -> no VX, load FP regs
-4:	# Load V0 ..V15 registers
-	VLM	%v0,%v15,0,%r4
-3:	# Load V16..V31 registers
-	VLM	%v16,%v31,256,%r4
-	j	1f
-2:	# Load floating-point registers
-	ld	0,0(%r4)
-	ld	1,8(%r4)
-	ld	2,16(%r4)
-	ld	3,24(%r4)
-	ld	4,32(%r4)
-	ld	5,40(%r4)
-	ld	6,48(%r4)
-	ld	7,56(%r4)
-	ld	8,64(%r4)
-	ld	9,72(%r4)
-	ld	10,80(%r4)
-	ld	11,88(%r4)
-	ld	12,96(%r4)
-	ld	13,104(%r4)
-	ld	14,112(%r4)
-	ld	15,120(%r4)
-1:	# Clear CIF_FPU bit
-	ni	__LC_CPU_FLAGS+7,255-_CIF_FPU
-	lg	%r9,48(%r11)		# return from load_fpu_regs
+	larl	%r9,load_fpu_regs
 	br	%r14
-.Lcleanup_load_fpu_regs_vx:
-	.quad	.Lload_fpu_regs_vx
-.Lcleanup_load_fpu_regs_vx_high:
-	.quad	.Lload_fpu_regs_vx_high
-.Lcleanup_load_fpu_regs_fp:
-	.quad	.Lload_fpu_regs_fp
-.Lcleanup_load_fpu_regs_done:
-	.quad	.Lload_fpu_regs_done
 
 /*
  * Integer constants
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index e0eaf11134b4..0f7bfeba6da6 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -203,7 +203,7 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
-	ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
+	ip -= MCOUNT_INSN_SIZE;
 	trace.func = ip;
 	trace.depth = current->curr_ret_stack + 1;
 	/* Only trace if the calling function expects to. */
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 1255c6c5353e..fcaefb041364 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -25,7 +25,9 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
+#include <asm/facility.h>
 #include <asm/page.h>
+#include <asm/ptrace.h>
 
 #define ARCH_OFFSET	4
 
@@ -59,19 +61,6 @@ __HEAD
 	.long	0x020006e0,0x20000050
 
 	.org	0x200
-#
-# subroutine to set architecture mode
-#
-.Lsetmode:
-	mvi	__LC_AR_MODE_ID,1	# set esame flag
-	slr	%r0,%r0 		# set cpuid to zero
-	lhi	%r1,2			# mode 2 = esame (dump)
-	sigp	%r1,%r0,0x12		# switch to esame mode
-	bras	%r13,0f
-	.fill	16,4,0x0
-0:	lmh	%r0,%r15,0(%r13)	# clear high-order half of gprs
-	sam31				# switch to 31 bit addressing mode
-	br	%r14
 
 #
 # subroutine to wait for end I/O
@@ -159,7 +148,14 @@ __HEAD
 	.long	0x02200050,0x00000000
 
 iplstart:
-	bas	%r14,.Lsetmode		# Immediately switch to 64 bit mode
+	mvi	__LC_AR_MODE_ID,1	# set esame flag
+	slr	%r0,%r0			# set cpuid to zero
+	lhi	%r1,2			# mode 2 = esame (dump)
+	sigp	%r1,%r0,0x12		# switch to esame mode
+	bras	%r13,0f
+	.fill	16,4,0x0
+0:	lmh	%r0,%r15,0(%r13)	# clear high-order half of gprs
+	sam31				# switch to 31 bit addressing mode
 	lh	%r1,0xb8		# test if subchannel number
 	bct	%r1,.Lnoload		#  is valid
 	l	%r1,0xb8		# load ipl subchannel number
@@ -269,71 +265,6 @@ iplstart:
 .Lcpuid:.fill	8,1,0
 
 #
-# SALIPL loader support. Based on a patch by Rob van der Heij.
-# This entry point is called directly from the SALIPL loader and
-# doesn't need a builtin ipl record.
-#
-	.org	0x800
-ENTRY(start)
-	stm	%r0,%r15,0x07b0		# store registers
-	bas	%r14,.Lsetmode		# Immediately switch to 64 bit mode
-	basr	%r12,%r0
-.base:
-	l	%r11,.parm
-	l	%r8,.cmd		# pointer to command buffer
-
-	ltr	%r9,%r9			# do we have SALIPL parameters?
-	bp	.sk8x8
-
-	mvc	0(64,%r8),0x00b0	# copy saved registers
-	xc	64(240-64,%r8),0(%r8)	# remainder of buffer
-	tr	0(64,%r8),.lowcase
-	b	.gotr
-.sk8x8:
-	mvc	0(240,%r8),0(%r9)	# copy iplparms into buffer
-.gotr:
-	slr	%r0,%r0
-	st	%r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
-	st	%r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
-	j	startup 		# continue with startup
-.cmd:	.long	COMMAND_LINE		# address of command line buffer
-.parm:	.long	PARMAREA
-.lowcase:
-	.byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
-	.byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
-	.byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
-	.byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
-	.byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
-	.byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
-	.byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
-	.byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
-	.byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
-	.byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
-	.byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
-	.byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
-	.byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
-	.byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
-	.byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
-	.byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
-
-	.byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
-	.byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
-	.byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
-	.byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
-	.byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
-	.byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
-	.byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
-	.byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
-	.byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87	# .abcdefg
-	.byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf	# hi
-	.byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97	# .jklmnop
-	.byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf	# qr
-	.byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7	# ..stuvwx
-	.byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef	# yz
-	.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
-	.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
-
-#
 # startup-code at 0x10000, running in absolute addressing mode
 # this is called either by the ipl loader or directly by PSW restart
 # or linload or SALIPL
@@ -364,38 +295,38 @@ ENTRY(startup_kdump)
 	bras	%r13,0f
 	.fill	16,4,0x0
 0:	lmh	%r0,%r15,0(%r13)	# clear high-order half of gprs
-	sam31				# switch to 31 bit addressing mode
+	sam64				# switch to 64 bit addressing mode
 	basr	%r13,0			# get base
 .LPG0:
 	xc	0x200(256),0x200	# partially clear lowcore
 	xc	0x300(256),0x300
 	xc	0xe00(256),0xe00
+	xc	0xf00(256),0xf00
 	lctlg	%c0,%c15,0x200(%r0)	# initialize control registers
 	stck	__LC_LAST_UPDATE_CLOCK
 	spt	6f-.LPG0(%r13)
 	mvc	__LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
-	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
-	# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
-	.insn	s,0xb2b10000,0		# store facilities @ __LC_STFL_FAC_LIST
-	tm	__LC_STFL_FAC_LIST,0x01	# stfle available ?
+	stfl	0(%r0)			# store facilities @ __LC_STFL_FAC_LIST
+	mvc	__LC_STFLE_FAC_LIST(4),__LC_STFL_FAC_LIST
+	tm	__LC_STFLE_FAC_LIST,0x01	# stfle available ?
 	jz	0f
-	la	%r0,1
-	.insn	s,0xb2b00000,__LC_STFL_FAC_LIST	# store facility list extended
+	lghi	%r0,FACILITIES_ALS_DWORDS-1
+	.insn	s,0xb2b00000,__LC_STFLE_FAC_LIST # store facility list extended
 	# verify if all required facilities are supported by the machine
-0:	la	%r1,__LC_STFL_FAC_LIST
+0:	la	%r1,__LC_STFLE_FAC_LIST
 	la	%r2,3f+8-.LPG0(%r13)
-	l	%r3,0(%r2)
-1:	l	%r0,0(%r1)
-	n	%r0,4(%r2)
-	cl	%r0,4(%r2)
+	lhi	%r3,FACILITIES_ALS_DWORDS
+1:	lg	%r0,0(%r1)
+	ng	%r0,0(%r2)
+	clg	%r0,0(%r2)
 	jne	2f
-	la	%r1,4(%r1)
-	la	%r2,4(%r2)
+	la	%r1,8(%r1)
+	la	%r2,8(%r2)
 	ahi	%r3,-1
 	jnz	1b
 	j	4f
 2:	l	%r15,.Lstack-.LPG0(%r13)
-	ahi	%r15,-96
+	ahi	%r15,-STACK_FRAME_OVERHEAD
 	la	%r2,.Lals_string-.LPG0(%r13)
 	l	%r3,.Lsclp_print-.LPG0(%r13)
 	basr	%r14,%r3
@@ -410,27 +341,12 @@ ENTRY(startup_kdump)
 3:	.long	0x000a0000,0x8badcccc
 
 # List of facilities that are required. If not all facilities are present
-# the kernel will crash. Format is number of facility words with bits set,
-# followed by the facility words.
+# the kernel will crash.
+
+	.quad FACILITIES_ALS
 
-#if defined(CONFIG_MARCH_Z13)
-	.long 2, 0xc100eff2, 0xf46cc800
-#elif defined(CONFIG_MARCH_ZEC12)
-	.long 2, 0xc100eff2, 0xf46cc800
-#elif defined(CONFIG_MARCH_Z196)
-	.long 2, 0xc100eff2, 0xf46c0000
-#elif defined(CONFIG_MARCH_Z10)
-	.long 2, 0xc100eff2, 0xf0680000
-#elif defined(CONFIG_MARCH_Z9_109)
-	.long 1, 0xc100efc2
-#elif defined(CONFIG_MARCH_Z990)
-	.long 1, 0xc0002000
-#elif defined(CONFIG_MARCH_Z900)
-	.long 1, 0xc0000000
-#endif
 4:
-	/* Continue with 64bit startup code in head64.S */
-	sam64				# switch to 64 bit mode
+	/* Continue with startup code in head64.S */
 	jg	startup_continue
 
 	.align	8
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 58b719fa8067..03c2b469c472 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -16,7 +16,7 @@
 
 __HEAD
 ENTRY(startup_continue)
-	tm	__LC_STFL_FAC_LIST+6,0x80	# LPP available ?
+	tm	__LC_STFLE_FAC_LIST+5,0x80	# LPP available ?
 	jz	0f
 	xc	__LC_LPP+1(7,0),__LC_LPP+1	# clear lpp and current_pid
 	mvi	__LC_LPP,0x80			#   and set LPP_MAGIC
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index f6d8acd7e136..f20abdb5630a 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -121,6 +121,7 @@ static char *dump_type_str(enum dump_type type)
  * Must be in data section since the bss section
  * is not cleared when these are accessed.
  */
+static u8 ipl_ssid __attribute__((__section__(".data"))) = 0;
 static u16 ipl_devno __attribute__((__section__(".data"))) = 0;
 u32 ipl_flags __attribute__((__section__(".data"))) = 0;
 
@@ -197,6 +198,33 @@ static ssize_t sys_##_prefix##_##_name##_show(struct kobject *kobj,	\
 	return snprintf(page, PAGE_SIZE, _format, ##args);		\
 }
 
+#define IPL_ATTR_CCW_STORE_FN(_prefix, _name, _ipl_blk)			\
+static ssize_t sys_##_prefix##_##_name##_store(struct kobject *kobj,	\
+		struct kobj_attribute *attr,				\
+		const char *buf, size_t len)				\
+{									\
+	unsigned long long ssid, devno;					\
+									\
+	if (sscanf(buf, "0.%llx.%llx\n", &ssid, &devno) != 2)		\
+		return -EINVAL;						\
+									\
+	if (ssid > __MAX_SSID || devno > __MAX_SUBCHANNEL)		\
+		return -EINVAL;						\
+									\
+	_ipl_blk.ssid = ssid;						\
+	_ipl_blk.devno = devno;						\
+	return len;							\
+}
+
+#define DEFINE_IPL_CCW_ATTR_RW(_prefix, _name, _ipl_blk)		\
+IPL_ATTR_SHOW_FN(_prefix, _name, "0.%x.%04x\n",				\
+		 _ipl_blk.ssid, _ipl_blk.devno);			\
+IPL_ATTR_CCW_STORE_FN(_prefix, _name, _ipl_blk);			\
+static struct kobj_attribute sys_##_prefix##_##_name##_attr =		\
+	__ATTR(_name, (S_IRUGO | S_IWUSR),				\
+	       sys_##_prefix##_##_name##_show,				\
+	       sys_##_prefix##_##_name##_store)				\
+
 #define DEFINE_IPL_ATTR_RO(_prefix, _name, _format, _value)		\
 IPL_ATTR_SHOW_FN(_prefix, _name, _format, _value)			\
 static struct kobj_attribute sys_##_prefix##_##_name##_attr =		\
@@ -395,7 +423,7 @@ static ssize_t sys_ipl_device_show(struct kobject *kobj,
 
 	switch (ipl_info.type) {
 	case IPL_TYPE_CCW:
-		return sprintf(page, "0.0.%04x\n", ipl_devno);
+		return sprintf(page, "0.%x.%04x\n", ipl_ssid, ipl_devno);
 	case IPL_TYPE_FCP:
 	case IPL_TYPE_FCP_DUMP:
 		return sprintf(page, "0.0.%04x\n", ipl->ipl_info.fcp.devno);
@@ -687,21 +715,14 @@ static ssize_t reipl_fcp_scpdata_write(struct file *filp, struct kobject *kobj,
 				       struct bin_attribute *attr,
 				       char *buf, loff_t off, size_t count)
 {
+	size_t scpdata_len = count;
 	size_t padding;
-	size_t scpdata_len;
 
-	if (off < 0)
-		return -EINVAL;
-
-	if (off >= DIAG308_SCPDATA_SIZE)
-		return -ENOSPC;
-
-	if (count > DIAG308_SCPDATA_SIZE - off)
-		count = DIAG308_SCPDATA_SIZE - off;
 
-	memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf + off, count);
-	scpdata_len = off + count;
+	if (off)
+		return -EINVAL;
 
+	memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf, count);
 	if (scpdata_len % 8) {
 		padding = 8 - (scpdata_len % 8);
 		memset(reipl_block_fcp->ipl_info.fcp.scp_data + scpdata_len,
@@ -717,7 +738,7 @@ static ssize_t reipl_fcp_scpdata_write(struct file *filp, struct kobject *kobj,
 }
 static struct bin_attribute sys_reipl_fcp_scp_data_attr =
 	__BIN_ATTR(scp_data, (S_IRUGO | S_IWUSR), reipl_fcp_scpdata_read,
-		   reipl_fcp_scpdata_write, PAGE_SIZE);
+		   reipl_fcp_scpdata_write, DIAG308_SCPDATA_SIZE);
 
 static struct bin_attribute *reipl_fcp_bin_attrs[] = {
 	&sys_reipl_fcp_scp_data_attr,
@@ -814,9 +835,7 @@ static struct attribute_group reipl_fcp_attr_group = {
 };
 
 /* CCW reipl device attributes */
-
-DEFINE_IPL_ATTR_RW(reipl_ccw, device, "0.0.%04llx\n", "0.0.%llx\n",
-	reipl_block_ccw->ipl_info.ccw.devno);
+DEFINE_IPL_CCW_ATTR_RW(reipl_ccw, device, reipl_block_ccw->ipl_info.ccw);
 
 /* NSS wrapper */
 static ssize_t reipl_nss_loadparm_show(struct kobject *kobj,
@@ -1056,8 +1075,8 @@ static void __reipl_run(void *unused)
 
 	switch (reipl_method) {
 	case REIPL_METHOD_CCW_CIO:
+		devid.ssid  = reipl_block_ccw->ipl_info.ccw.ssid;
 		devid.devno = reipl_block_ccw->ipl_info.ccw.devno;
-		devid.ssid  = 0;
 		reipl_ccw_dev(&devid);
 		break;
 	case REIPL_METHOD_CCW_VM:
@@ -1192,6 +1211,7 @@ static int __init reipl_ccw_init(void)
 
 	reipl_block_ccw_init(reipl_block_ccw);
 	if (ipl_info.type == IPL_TYPE_CCW) {
+		reipl_block_ccw->ipl_info.ccw.ssid = ipl_ssid;
 		reipl_block_ccw->ipl_info.ccw.devno = ipl_devno;
 		reipl_block_ccw_fill_parms(reipl_block_ccw);
 	}
@@ -1336,9 +1356,7 @@ static struct attribute_group dump_fcp_attr_group = {
 };
 
 /* CCW dump device attributes */
-
-DEFINE_IPL_ATTR_RW(dump_ccw, device, "0.0.%04llx\n", "0.0.%llx\n",
-		   dump_block_ccw->ipl_info.ccw.devno);
+DEFINE_IPL_CCW_ATTR_RW(dump_ccw, device, dump_block_ccw->ipl_info.ccw);
 
 static struct attribute *dump_ccw_attrs[] = {
 	&sys_dump_ccw_device_attr.attr,
@@ -1418,8 +1436,8 @@ static void __dump_run(void *unused)
 
 	switch (dump_method) {
 	case DUMP_METHOD_CCW_CIO:
+		devid.ssid  = dump_block_ccw->ipl_info.ccw.ssid;
 		devid.devno = dump_block_ccw->ipl_info.ccw.devno;
-		devid.ssid  = 0;
 		reipl_ccw_dev(&devid);
 		break;
 	case DUMP_METHOD_CCW_VM:
@@ -1939,14 +1957,14 @@ void __init setup_ipl(void)
 	ipl_info.type = get_ipl_type();
 	switch (ipl_info.type) {
 	case IPL_TYPE_CCW:
+		ipl_info.data.ccw.dev_id.ssid = ipl_ssid;
 		ipl_info.data.ccw.dev_id.devno = ipl_devno;
-		ipl_info.data.ccw.dev_id.ssid = 0;
 		break;
 	case IPL_TYPE_FCP:
 	case IPL_TYPE_FCP_DUMP:
+		ipl_info.data.fcp.dev_id.ssid = 0;
 		ipl_info.data.fcp.dev_id.devno =
 			IPL_PARMBLOCK_START->ipl_info.fcp.devno;
-		ipl_info.data.fcp.dev_id.ssid = 0;
 		ipl_info.data.fcp.wwpn = IPL_PARMBLOCK_START->ipl_info.fcp.wwpn;
 		ipl_info.data.fcp.lun = IPL_PARMBLOCK_START->ipl_info.fcp.lun;
 		break;
@@ -1978,6 +1996,7 @@ void __init ipl_save_parameters(void)
 	if (cio_get_iplinfo(&iplinfo))
 		return;
 
+	ipl_ssid = iplinfo.ssid;
 	ipl_devno = iplinfo.devno;
 	ipl_flags |= IPL_DEVNO_VALID;
 	if (!iplinfo.is_qdio)
@@ -2020,21 +2039,15 @@ static void do_reset_calls(void)
 		reset->fn();
 }
 
-u32 dump_prefix_page;
-
-void s390_reset_system(void (*fn_pre)(void),
-		       void (*fn_post)(void *), void *data)
+void s390_reset_system(void)
 {
-	struct _lowcore *lc;
+	struct lowcore *lc;
 
-	lc = (struct _lowcore *)(unsigned long) store_prefix();
+	lc = (struct lowcore *)(unsigned long) store_prefix();
 
 	/* Stack for interrupt/machine check handler */
 	lc->panic_stack = S390_lowcore.panic_stack;
 
-	/* Save prefix page address for dump case */
-	dump_prefix_page = (u32)(unsigned long) lc;
-
 	/* Disable prefixing */
 	set_prefix(0);
 
@@ -2044,12 +2057,12 @@ void s390_reset_system(void (*fn_pre)(void),
 	/* Set new machine check handler */
 	S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.mcck_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler;
+		(unsigned long) s390_base_mcck_handler;
 
 	/* Set new program check handler */
 	S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.program_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
+		(unsigned long) s390_base_pgm_handler;
 
 	/*
 	 * Clear subchannel ID and number to signal new kernel that no CCW or
@@ -2058,14 +2071,5 @@ void s390_reset_system(void (*fn_pre)(void),
 	S390_lowcore.subchannel_id = 0;
 	S390_lowcore.subchannel_nr = 0;
 
-	/* Store status at absolute zero */
-	store_status();
-
-	/* Call function before reset */
-	if (fn_pre)
-		fn_pre();
 	do_reset_calls();
-	/* Call function after reset */
-	if (fn_post)
-		fn_post(data);
 }
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index f41d5208aaf7..c373a1d41d10 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -164,8 +164,7 @@ void do_softirq_own_stack(void)
 {
 	unsigned long old, new;
 
-	/* Get current stack pointer. */
-	asm volatile("la %0,0(15)" : "=a" (old));
+	old = current_stack_pointer();
 	/* Check against async. stack address range. */
 	new = S390_lowcore.async_stack;
 	if (((new - old) >> (PAGE_SHIFT + THREAD_ORDER)) != 0) {
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 389db56a2208..250f5972536a 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -226,7 +226,7 @@ static void enable_singlestep(struct kprobe_ctlblk *kcb,
 	__ctl_load(per_kprobe, 9, 11);
 	regs->psw.mask |= PSW_MASK_PER;
 	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
-	regs->psw.addr = ip | PSW_ADDR_AMODE;
+	regs->psw.addr = ip;
 }
 NOKPROBE_SYMBOL(enable_singlestep);
 
@@ -238,7 +238,7 @@ static void disable_singlestep(struct kprobe_ctlblk *kcb,
 	__ctl_load(kcb->kprobe_saved_ctl, 9, 11);
 	regs->psw.mask &= ~PSW_MASK_PER;
 	regs->psw.mask |= kcb->kprobe_saved_imask;
-	regs->psw.addr = ip | PSW_ADDR_AMODE;
+	regs->psw.addr = ip;
 }
 NOKPROBE_SYMBOL(disable_singlestep);
 
@@ -310,7 +310,7 @@ static int kprobe_handler(struct pt_regs *regs)
 	 */
 	preempt_disable();
 	kcb = get_kprobe_ctlblk();
-	p = get_kprobe((void *)((regs->psw.addr & PSW_ADDR_INSN) - 2));
+	p = get_kprobe((void *)(regs->psw.addr - 2));
 
 	if (p) {
 		if (kprobe_running()) {
@@ -460,7 +460,7 @@ static int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 			break;
 	}
 
-	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
+	regs->psw.addr = orig_ret_address;
 
 	pop_kprobe(get_kprobe_ctlblk());
 	kretprobe_hash_unlock(current, &flags);
@@ -490,7 +490,7 @@ NOKPROBE_SYMBOL(trampoline_probe_handler);
 static void resume_execution(struct kprobe *p, struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long ip = regs->psw.addr & PSW_ADDR_INSN;
+	unsigned long ip = regs->psw.addr;
 	int fixup = probe_get_fixup_type(p->ainsn.insn);
 
 	/* Check if the kprobes location is an enabled ftrace caller */
@@ -605,9 +605,9 @@ static int kprobe_trap_handler(struct pt_regs *regs, int trapnr)
 		 * In case the user-specified fault handler returned
 		 * zero, try to fix up.
 		 */
-		entry = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
+		entry = search_exception_tables(regs->psw.addr);
 		if (entry) {
-			regs->psw.addr = extable_fixup(entry) | PSW_ADDR_AMODE;
+			regs->psw.addr = extable_fixup(entry);
 			return 1;
 		}
 
@@ -683,7 +683,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
 
 	/* setup return addr to the jprobe handler routine */
-	regs->psw.addr = (unsigned long) jp->entry | PSW_ADDR_AMODE;
+	regs->psw.addr = (unsigned long) jp->entry;
 	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
 
 	/* r15 is the stack pointer */
diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c
index fb0901ec4306..2f1b7217c25c 100644
--- a/arch/s390/kernel/machine_kexec.c
+++ b/arch/s390/kernel/machine_kexec.c
@@ -35,46 +35,6 @@ extern const unsigned long long relocate_kernel_len;
 #ifdef CONFIG_CRASH_DUMP
 
 /*
- * Create ELF notes for one CPU
- */
-static void add_elf_notes(int cpu)
-{
-	struct save_area *sa = (void *) 4608 + store_prefix();
-	void *ptr;
-
-	memcpy((void *) (4608UL + sa->pref_reg), sa, sizeof(*sa));
-	ptr = (u64 *) per_cpu_ptr(crash_notes, cpu);
-	ptr = fill_cpu_elf_notes(ptr, sa, NULL);
-	memset(ptr, 0, sizeof(struct elf_note));
-}
-
-/*
- * Initialize CPU ELF notes
- */
-static void setup_regs(void)
-{
-	unsigned long sa = S390_lowcore.prefixreg_save_area + SAVE_AREA_BASE;
-	struct _lowcore *lc;
-	int cpu, this_cpu;
-
-	/* Get lowcore pointer from store status of this CPU (absolute zero) */
-	lc = (struct _lowcore *)(unsigned long)S390_lowcore.prefixreg_save_area;
-	this_cpu = smp_find_processor_id(stap());
-	add_elf_notes(this_cpu);
-	for_each_online_cpu(cpu) {
-		if (cpu == this_cpu)
-			continue;
-		if (smp_store_status(cpu))
-			continue;
-		add_elf_notes(cpu);
-	}
-	if (MACHINE_HAS_VX)
-		save_vx_regs_safe((void *) lc->vector_save_area_addr);
-	/* Copy dump CPU store status info to absolute zero */
-	memcpy((void *) SAVE_AREA_BASE, (void *) sa, sizeof(struct save_area));
-}
-
-/*
  * PM notifier callback for kdump
  */
 static int machine_kdump_pm_cb(struct notifier_block *nb, unsigned long action,
@@ -105,14 +65,66 @@ static int __init machine_kdump_pm_init(void)
 arch_initcall(machine_kdump_pm_init);
 
 /*
- * Start kdump: We expect here that a store status has been done on our CPU
+ * Reset the system, copy boot CPU registers to absolute zero,
+ * and jump to the kdump image
  */
 static void __do_machine_kdump(void *image)
 {
-	int (*start_kdump)(int) = (void *)((struct kimage *) image)->start;
+	int (*start_kdump)(int);
+	unsigned long prefix;
+
+	/* store_status() saved the prefix register to lowcore */
+	prefix = (unsigned long) S390_lowcore.prefixreg_save_area;
+
+	/* Now do the reset  */
+	s390_reset_system();
+
+	/*
+	 * Copy dump CPU store status info to absolute zero.
+	 * This need to be done *after* s390_reset_system set the
+	 * prefix register of this CPU to zero
+	 */
+	memcpy((void *) __LC_FPREGS_SAVE_AREA,
+	       (void *)(prefix + __LC_FPREGS_SAVE_AREA), 512);
 
 	__load_psw_mask(PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA);
+	start_kdump = (void *)((struct kimage *) image)->start;
 	start_kdump(1);
+
+	/* Die if start_kdump returns */
+	disabled_wait((unsigned long) __builtin_return_address(0));
+}
+
+/*
+ * Start kdump: create a LGR log entry, store status of all CPUs and
+ * branch to __do_machine_kdump.
+ */
+static noinline void __machine_kdump(void *image)
+{
+	int this_cpu, cpu;
+
+	lgr_info_log();
+	/* Get status of the other CPUs */
+	this_cpu = smp_find_processor_id(stap());
+	for_each_online_cpu(cpu) {
+		if (cpu == this_cpu)
+			continue;
+		if (smp_store_status(cpu))
+			continue;
+	}
+	/* Store status of the boot CPU */
+	if (MACHINE_HAS_VX)
+		save_vx_regs((void *) &S390_lowcore.vector_save_area);
+	/*
+	 * To create a good backchain for this CPU in the dump store_status
+	 * is passed the address of a function. The address is saved into
+	 * the PSW save area of the boot CPU and the function is invoked as
+	 * a tail call of store_status. The backchain in the dump will look
+	 * like this:
+	 *   restart_int_handler ->  __machine_kexec -> __do_machine_kdump
+	 * The call to store_status() will not return.
+	 */
+	store_status(__do_machine_kdump, image);
 }
 #endif
 
@@ -235,10 +247,14 @@ static void __do_machine_kexec(void *data)
 	relocate_kernel_t data_mover;
 	struct kimage *image = data;
 
+	s390_reset_system();
 	data_mover = (relocate_kernel_t) page_to_phys(image->control_code_page);
 
 	/* Call the moving routine */
 	(*data_mover)(&image->head, image->start);
+
+	/* Die if kexec returns */
+	disabled_wait((unsigned long) __builtin_return_address(0));
 }
 
 /*
@@ -251,14 +267,10 @@ static void __machine_kexec(void *data)
 	tracing_off();
 	debug_locks_off();
 #ifdef CONFIG_CRASH_DUMP
-	if (((struct kimage *) data)->type == KEXEC_TYPE_CRASH) {
-
-		lgr_info_log();
-		s390_reset_system(setup_regs, __do_machine_kdump, data);
-	} else
+	if (((struct kimage *) data)->type == KEXEC_TYPE_CRASH)
+		__machine_kdump(data);
 #endif
-		s390_reset_system(NULL, __do_machine_kexec, data);
-	disabled_wait((unsigned long) __builtin_return_address(0));
+	__do_machine_kexec(data);
 }
 
 /*
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 0c1a679314dd..7873e171457c 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -159,11 +159,11 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 
 	/* Increase core size by size of got & plt and set start
 	   offsets for got and plt. */
-	me->core_size = ALIGN(me->core_size, 4);
-	me->arch.got_offset = me->core_size;
-	me->core_size += me->arch.got_size;
-	me->arch.plt_offset = me->core_size;
-	me->core_size += me->arch.plt_size;
+	me->core_layout.size = ALIGN(me->core_layout.size, 4);
+	me->arch.got_offset = me->core_layout.size;
+	me->core_layout.size += me->arch.got_size;
+	me->arch.plt_offset = me->core_layout.size;
+	me->core_layout.size += me->arch.plt_size;
 	return 0;
 }
 
@@ -279,7 +279,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 		if (info->got_initialized == 0) {
 			Elf_Addr *gotent;
 
-			gotent = me->module_core + me->arch.got_offset +
+			gotent = me->core_layout.base + me->arch.got_offset +
 				info->got_offset;
 			*gotent = val;
 			info->got_initialized = 1;
@@ -302,7 +302,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 			rc = apply_rela_bits(loc, val, 0, 64, 0);
 		else if (r_type == R_390_GOTENT ||
 			 r_type == R_390_GOTPLTENT) {
-			val += (Elf_Addr) me->module_core - loc;
+			val += (Elf_Addr) me->core_layout.base - loc;
 			rc = apply_rela_bits(loc, val, 1, 32, 1);
 		}
 		break;
@@ -315,7 +315,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 	case R_390_PLTOFF64:	/* 16 bit offset from GOT to PLT. */
 		if (info->plt_initialized == 0) {
 			unsigned int *ip;
-			ip = me->module_core + me->arch.plt_offset +
+			ip = me->core_layout.base + me->arch.plt_offset +
 				info->plt_offset;
 			ip[0] = 0x0d10e310; /* basr 1,0; lg 1,10(1); br 1 */
 			ip[1] = 0x100a0004;
@@ -334,7 +334,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 			       val - loc + 0xffffUL < 0x1ffffeUL) ||
 			      (r_type == R_390_PLT32DBL &&
 			       val - loc + 0xffffffffULL < 0x1fffffffeULL)))
-				val = (Elf_Addr) me->module_core +
+				val = (Elf_Addr) me->core_layout.base +
 					me->arch.plt_offset +
 					info->plt_offset;
 			val += rela->r_addend - loc;
@@ -356,7 +356,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 	case R_390_GOTOFF32:	/* 32 bit offset to GOT.  */
 	case R_390_GOTOFF64:	/* 64 bit offset to GOT. */
 		val = val + rela->r_addend -
-			((Elf_Addr) me->module_core + me->arch.got_offset);
+			((Elf_Addr) me->core_layout.base + me->arch.got_offset);
 		if (r_type == R_390_GOTOFF16)
 			rc = apply_rela_bits(loc, val, 0, 16, 0);
 		else if (r_type == R_390_GOTOFF32)
@@ -366,7 +366,7 @@ static int apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
 		break;
 	case R_390_GOTPC:	/* 32 bit PC relative offset to GOT. */
 	case R_390_GOTPCDBL:	/* 32 bit PC rel. off. to GOT shifted by 1. */
-		val = (Elf_Addr) me->module_core + me->arch.got_offset +
+		val = (Elf_Addr) me->core_layout.base + me->arch.got_offset +
 			rela->r_addend - loc;
 		if (r_type == R_390_GOTPC)
 			rc = apply_rela_bits(loc, val, 1, 32, 0);
diff --git a/arch/s390/kernel/os_info.c b/arch/s390/kernel/os_info.c
index d112fc66f993..87f05e475ae8 100644
--- a/arch/s390/kernel/os_info.c
+++ b/arch/s390/kernel/os_info.c
@@ -89,7 +89,7 @@ static void os_info_old_alloc(int nr, int align)
 		goto fail;
 	}
 	buf_align = PTR_ALIGN(buf, align);
-	if (copy_from_oldmem(buf_align, (void *) addr, size)) {
+	if (copy_oldmem_kernel(buf_align, (void *) addr, size)) {
 		msg = "copy failed";
 		goto fail_free;
 	}
@@ -122,14 +122,15 @@ static void os_info_old_init(void)
 		return;
 	if (!OLDMEM_BASE)
 		goto fail;
-	if (copy_from_oldmem(&addr, &S390_lowcore.os_info, sizeof(addr)))
+	if (copy_oldmem_kernel(&addr, &S390_lowcore.os_info, sizeof(addr)))
 		goto fail;
 	if (addr == 0 || addr % PAGE_SIZE)
 		goto fail;
 	os_info_old = kzalloc(sizeof(*os_info_old), GFP_KERNEL);
 	if (!os_info_old)
 		goto fail;
-	if (copy_from_oldmem(os_info_old, (void *) addr, sizeof(*os_info_old)))
+	if (copy_oldmem_kernel(os_info_old, (void *) addr,
+			       sizeof(*os_info_old)))
 		goto fail_free;
 	if (os_info_old->magic != OS_INFO_MAGIC)
 		goto fail_free;
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 929c147e07b4..62f066b5259e 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -383,7 +383,7 @@ static int __hw_perf_event_init(struct perf_event *event)
 
 	/* Validate the counter that is assigned to this event.
 	 * Because the counter facility can use numerous counters at the
-	 * same time without constraints, it is not necessary to explicity
+	 * same time without constraints, it is not necessary to explicitly
 	 * validate event groups (event->group_leader != event).
 	 */
 	err = validate_event(hwc);
@@ -670,6 +670,7 @@ static int cpumf_pmu_notifier(struct notifier_block *self, unsigned long action,
 
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
 		flags = PMC_INIT;
 		smp_call_function_single(cpu, setup_pmc_cpu, &flags, 1);
 		break;
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 3d8da1e742c2..eaab9a7cb3be 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1022,10 +1022,13 @@ static int perf_push_sample(struct perf_event *event, struct sf_raw_sample *sfr)
 	/*
 	 * A non-zero guest program parameter indicates a guest
 	 * sample.
-	 * Note that some early samples might be misaccounted to
-	 * the host.
+	 * Note that some early samples or samples from guests without
+	 * lpp usage would be misaccounted to the host. We use the asn
+	 * value as a heuristic to detect most of these guest samples.
+	 * If the value differs from the host hpp value, we assume
+	 * it to be a KVM guest.
 	 */
-	if (sfr->basic.gpp)
+	if (sfr->basic.gpp || sfr->basic.prim_asn != (u16) sfr->basic.hpp)
 		sde_regs->in_guest = 1;
 
 	overflow = 0;
@@ -1518,7 +1521,7 @@ static int cpumf_pmu_notifier(struct notifier_block *self,
 
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
+	case CPU_DOWN_FAILED:
 		flags = PMC_INIT;
 		smp_call_function_single(cpu, setup_pmc_cpu, &flags, 1);
 		break;
diff --git a/arch/s390/kernel/perf_event.c b/arch/s390/kernel/perf_event.c
index 61595c1f0a0f..c3e4099b60a5 100644
--- a/arch/s390/kernel/perf_event.c
+++ b/arch/s390/kernel/perf_event.c
@@ -74,7 +74,7 @@ static unsigned long guest_is_user_mode(struct pt_regs *regs)
 
 static unsigned long instruction_pointer_guest(struct pt_regs *regs)
 {
-	return sie_block(regs)->gpsw.addr & PSW_ADDR_INSN;
+	return sie_block(regs)->gpsw.addr;
 }
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
@@ -222,67 +222,23 @@ static int __init service_level_perf_register(void)
 }
 arch_initcall(service_level_perf_register);
 
-/* See also arch/s390/kernel/traps.c */
-static unsigned long __store_trace(struct perf_callchain_entry *entry,
-				   unsigned long sp,
-				   unsigned long low, unsigned long high)
+static int __perf_callchain_kernel(void *data, unsigned long address)
 {
-	struct stack_frame *sf;
-	struct pt_regs *regs;
-
-	while (1) {
-		sp = sp & PSW_ADDR_INSN;
-		if (sp < low || sp > high - sizeof(*sf))
-			return sp;
-		sf = (struct stack_frame *) sp;
-		perf_callchain_store(entry, sf->gprs[8] & PSW_ADDR_INSN);
-		/* Follow the backchain. */
-		while (1) {
-			low = sp;
-			sp = sf->back_chain & PSW_ADDR_INSN;
-			if (!sp)
-				break;
-			if (sp <= low || sp > high - sizeof(*sf))
-				return sp;
-			sf = (struct stack_frame *) sp;
-			perf_callchain_store(entry,
-					     sf->gprs[8] & PSW_ADDR_INSN);
-		}
-		/* Zero backchain detected, check for interrupt frame. */
-		sp = (unsigned long) (sf + 1);
-		if (sp <= low || sp > high - sizeof(*regs))
-			return sp;
-		regs = (struct pt_regs *) sp;
-		perf_callchain_store(entry, sf->gprs[8] & PSW_ADDR_INSN);
-		low = sp;
-		sp = regs->gprs[15];
-	}
+	struct perf_callchain_entry *entry = data;
+
+	perf_callchain_store(entry, address);
+	return 0;
 }
 
 void perf_callchain_kernel(struct perf_callchain_entry *entry,
 			   struct pt_regs *regs)
 {
-	unsigned long head;
-	struct stack_frame *head_sf;
-
 	if (user_mode(regs))
 		return;
-
-	head = regs->gprs[15];
-	head_sf = (struct stack_frame *) head;
-
-	if (!head_sf || !head_sf->back_chain)
-		return;
-
-	head = head_sf->back_chain;
-	head = __store_trace(entry, head, S390_lowcore.async_stack - ASYNC_SIZE,
-			     S390_lowcore.async_stack);
-
-	__store_trace(entry, head, S390_lowcore.thread_info,
-		      S390_lowcore.thread_info + THREAD_SIZE);
+	dump_trace(__perf_callchain_kernel, entry, NULL, regs->gprs[15]);
 }
 
-/* Perf defintions for PMU event attributes in sysfs */
+/* Perf definitions for PMU event attributes in sysfs */
 ssize_t cpumf_events_sysfs_show(struct device *dev,
 				struct device_attribute *attr, char *page)
 {
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 688a3aad9c79..2bba7df4ac51 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -56,10 +56,10 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 		return 0;
 	low = task_stack_page(tsk);
 	high = (struct stack_frame *) task_pt_regs(tsk);
-	sf = (struct stack_frame *) (tsk->thread.ksp & PSW_ADDR_INSN);
+	sf = (struct stack_frame *) tsk->thread.ksp;
 	if (sf <= low || sf > high)
 		return 0;
-	sf = (struct stack_frame *) (sf->back_chain & PSW_ADDR_INSN);
+	sf = (struct stack_frame *) sf->back_chain;
 	if (sf <= low || sf > high)
 		return 0;
 	return sf->gprs[8];
@@ -154,7 +154,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 		memset(&frame->childregs, 0, sizeof(struct pt_regs));
 		frame->childregs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT |
 				PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
-		frame->childregs.psw.addr = PSW_ADDR_AMODE |
+		frame->childregs.psw.addr =
 				(unsigned long) kernel_thread_starter;
 		frame->childregs.gprs[9] = new_stackp; /* function */
 		frame->childregs.gprs[10] = arg;
@@ -220,14 +220,14 @@ unsigned long get_wchan(struct task_struct *p)
 		return 0;
 	low = task_stack_page(p);
 	high = (struct stack_frame *) task_pt_regs(p);
-	sf = (struct stack_frame *) (p->thread.ksp & PSW_ADDR_INSN);
+	sf = (struct stack_frame *) p->thread.ksp;
 	if (sf <= low || sf > high)
 		return 0;
 	for (count = 0; count < 16; count++) {
-		sf = (struct stack_frame *) (sf->back_chain & PSW_ADDR_INSN);
+		sf = (struct stack_frame *) sf->back_chain;
 		if (sf <= low || sf > high)
 			return 0;
-		return_address = sf->gprs[8] & PSW_ADDR_INSN;
+		return_address = sf->gprs[8];
 		if (!in_sched_functions(return_address))
 			return return_address;
 	}
@@ -243,11 +243,7 @@ unsigned long arch_align_stack(unsigned long sp)
 
 static inline unsigned long brk_rnd(void)
 {
-	/* 8MB for 32bit, 1GB for 64bit */
-	if (is_32bit_task())
-		return (get_random_int() & 0x7ffUL) << PAGE_SHIFT;
-	else
-		return (get_random_int() & 0x3ffffUL) << PAGE_SHIFT;
+	return (get_random_int() & BRK_RND_MASK) << PAGE_SHIFT;
 }
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 7ce00e7a709a..647128d5b983 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -61,6 +61,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
 		"edat", "etf3eh", "highgprs", "te", "vx"
 	};
+	static const char * const int_hwcap_str[] = {
+		"sie"
+	};
 	unsigned long n = (unsigned long) v - 1;
 	int i;
 
@@ -75,6 +78,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		for (i = 0; i < ARRAY_SIZE(hwcap_str); i++)
 			if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
 				seq_printf(m, "%s ", hwcap_str[i]);
+		for (i = 0; i < ARRAY_SIZE(int_hwcap_str); i++)
+			if (int_hwcap_str[i] && (int_hwcap & (1UL << i)))
+				seq_printf(m, "%s ", int_hwcap_str[i]);
 		seq_puts(m, "\n");
 		show_cacheinfo(m);
 	}
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 01c37b36caf9..49b1c13bf6c9 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -84,7 +84,7 @@ void update_cr_regs(struct task_struct *task)
 		if (test_tsk_thread_flag(task, TIF_UPROBE_SINGLESTEP))
 			new.control |= PER_EVENT_IFETCH;
 		new.start = 0;
-		new.end = PSW_ADDR_INSN;
+		new.end = -1UL;
 	}
 
 	/* Take care of the PER enablement bit in the PSW. */
@@ -148,7 +148,7 @@ static inline unsigned long __peek_user_per(struct task_struct *child,
 	else if (addr == (addr_t) &dummy->cr11)
 		/* End address of the active per set. */
 		return test_thread_flag(TIF_SINGLE_STEP) ?
-			PSW_ADDR_INSN : child->thread.per_user.end;
+			-1UL : child->thread.per_user.end;
 	else if (addr == (addr_t) &dummy->bits)
 		/* Single-step bit. */
 		return test_thread_flag(TIF_SINGLE_STEP) ?
@@ -495,8 +495,6 @@ long arch_ptrace(struct task_struct *child, long request,
 		}
 		return 0;
 	default:
-		/* Removing high order bit from addr (only for 31 bit). */
-		addr &= PSW_ADDR_INSN;
 		return ptrace_request(child, request, addr, data);
 	}
 }
diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S
index 52aab0bd84f8..89ea8c213d82 100644
--- a/arch/s390/kernel/reipl.S
+++ b/arch/s390/kernel/reipl.S
@@ -9,60 +9,66 @@
 #include <asm/sigp.h>
 
 #
-# store_status
+# Issue "store status" for the current CPU to its prefix page
+# and call passed function afterwards
 #
-# Prerequisites to run this function:
-# - Prefix register is set to zero
-# - Original prefix register is stored in "dump_prefix_page"
-# - Lowcore protection is off
+# r2 = Function to be called after store status
+# r3 = Parameter for function
 #
 ENTRY(store_status)
 	/* Save register one and load save area base */
 	stg	%r1,__LC_SAVE_AREA_RESTART
-	lghi	%r1,SAVE_AREA_BASE
 	/* General purpose registers */
-	stmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	lg	%r2,__LC_SAVE_AREA_RESTART
-	stg	%r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1)
+	lghi	%r1,__LC_GPREGS_SAVE_AREA
+	stmg	%r0,%r15,0(%r1)
+	mvc	8(8,%r1),__LC_SAVE_AREA_RESTART
 	/* Control registers */
-	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	lghi	%r1,__LC_CREGS_SAVE_AREA
+	stctg	%c0,%c15,0(%r1)
 	/* Access registers */
-	stam	%a0,%a15,__LC_AREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	lghi	%r1,__LC_AREGS_SAVE_AREA
+	stam	%a0,%a15,0(%r1)
 	/* Floating point registers */
-	std	%f0, 0x00 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f1, 0x08 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f2, 0x10 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f3, 0x18 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f4, 0x20 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f5, 0x28 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f6, 0x30 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f7, 0x38 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f8, 0x40 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f9, 0x48 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f10,0x50 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f11,0x58 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f12,0x60 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f13,0x68 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f14,0x70 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	std	%f15,0x78 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	lghi	%r1,__LC_FPREGS_SAVE_AREA
+	std	%f0, 0x00(%r1)
+	std	%f1, 0x08(%r1)
+	std	%f2, 0x10(%r1)
+	std	%f3, 0x18(%r1)
+	std	%f4, 0x20(%r1)
+	std	%f5, 0x28(%r1)
+	std	%f6, 0x30(%r1)
+	std	%f7, 0x38(%r1)
+	std	%f8, 0x40(%r1)
+	std	%f9, 0x48(%r1)
+	std	%f10,0x50(%r1)
+	std	%f11,0x58(%r1)
+	std	%f12,0x60(%r1)
+	std	%f13,0x68(%r1)
+	std	%f14,0x70(%r1)
+	std	%f15,0x78(%r1)
 	/* Floating point control register */
-	stfpc	__LC_FP_CREG_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	lghi	%r1,__LC_FP_CREG_SAVE_AREA
+	stfpc	0(%r1)
 	/* CPU timer */
-	stpt	__LC_CPU_TIMER_SAVE_AREA-SAVE_AREA_BASE(%r1)
-	/* Saved prefix register */
-	larl	%r2,dump_prefix_page
-	mvc	__LC_PREFIX_SAVE_AREA-SAVE_AREA_BASE(4,%r1),0(%r2)
+	lghi	%r1,__LC_CPU_TIMER_SAVE_AREA
+	stpt	0(%r1)
+	/* Store prefix register */
+	lghi	%r1,__LC_PREFIX_SAVE_AREA
+	stpx	0(%r1)
 	/* Clock comparator - seven bytes */
-	larl	%r2,.Lclkcmp
-	stckc	0(%r2)
-	mvc	__LC_CLOCK_COMP_SAVE_AREA-SAVE_AREA_BASE + 1(7,%r1),1(%r2)
+	lghi	%r1,__LC_CLOCK_COMP_SAVE_AREA
+	larl	%r4,.Lclkcmp
+	stckc	0(%r4)
+	mvc	1(7,%r1),1(%r4)
 	/* Program status word */
-	epsw	%r2,%r3
-	st	%r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 0(%r1)
-	st	%r3,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 4(%r1)
-	larl	%r2,store_status
-	stg	%r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 8(%r1)
-	br	%r14
+	lghi	%r1,__LC_PSW_SAVE_AREA
+	epsw	%r4,%r5
+	st	%r4,0(%r1)
+	st	%r5,4(%r1)
+	stg	%r2,8(%r1)
+	lgr	%r1,%r2
+	lgr	%r2,%r3
+	br	%r1
 
 	.section .bss
 	.align	8
@@ -77,9 +83,11 @@ ENTRY(store_status)
 ENTRY(do_reipl_asm)
 		basr	%r13,0
 .Lpg0:		lpswe	.Lnewpsw-.Lpg0(%r13)
-.Lpg1:		brasl	%r14,store_status
+.Lpg1:		lgr	%r3,%r2
+		larl	%r2,.Lstatus
+		brasl	%r14,store_status
 
-		lctlg	%c6,%c6,.Lall-.Lpg0(%r13)
+.Lstatus:	lctlg	%c6,%c6,.Lall-.Lpg0(%r13)
 		lgr	%r1,%r2
 		mvc	__LC_PGM_NEW_PSW(16),.Lpcnew-.Lpg0(%r13)
 		stsch	.Lschib-.Lpg0(%r13)
diff --git a/arch/s390/kernel/sclp.c b/arch/s390/kernel/sclp.c
index fa0bdff1d413..d88db40bdf15 100644
--- a/arch/s390/kernel/sclp.c
+++ b/arch/s390/kernel/sclp.c
@@ -9,7 +9,11 @@
 #include <asm/processor.h>
 #include <asm/sclp.h>
 
+#define EVTYP_VT220MSG_MASK	0x00000040
+#define EVTYP_MSG_MASK		0x40000000
+
 static char _sclp_work_area[4096] __aligned(PAGE_SIZE);
+static bool have_vt220, have_linemode;
 
 static void _sclp_wait_int(void)
 {
@@ -21,7 +25,7 @@ static void _sclp_wait_int(void)
 	__ctl_load(cr0_new, 0, 0);
 
 	psw_ext_save = S390_lowcore.external_new_psw;
-	psw_mask = __extract_psw() & (PSW_MASK_EA | PSW_MASK_BA);
+	psw_mask = __extract_psw();
 	S390_lowcore.external_new_psw.mask = psw_mask;
 	psw_wait.mask = psw_mask | PSW_MASK_EXT | PSW_MASK_WAIT;
 	S390_lowcore.ext_int_code = 0;
@@ -68,7 +72,7 @@ static int _sclp_setup(int disable)
 		0x00, 0x1c,
 		0x00, 0x00, 0x00, 0x00,	0x00, 0x00, 0x00, 0x00,
 		0x00, 0x04,
-		0x80, 0x00, 0x00, 0x00,	0x40, 0x00, 0x00, 0x00,
+		0x80, 0x00, 0x00, 0x00,	0x40, 0x00, 0x00, 0x40,
 		0x00, 0x00, 0x00, 0x00,	0x00, 0x00, 0x00, 0x00
 	};
 	unsigned int *masks;
@@ -82,13 +86,13 @@ static int _sclp_setup(int disable)
 	rc = _sclp_servc(0x00780005, _sclp_work_area);
 	if (rc)
 		return rc;
-	if ((masks[0] & masks[3]) != masks[0] ||
-	    (masks[1] & masks[2]) != masks[1])
-		return -EIO;
+	have_vt220 = masks[2] & EVTYP_VT220MSG_MASK;
+	have_linemode = masks[2] & EVTYP_MSG_MASK;
 	return 0;
 }
 
-static int _sclp_print(const char *str)
+/* Output multi-line text using SCLP Message interface. */
+static void _sclp_print_lm(const char *str)
 {
 	static unsigned char write_head[] = {
 		/* sccb header */
@@ -143,18 +147,49 @@ static int _sclp_print(const char *str)
 	} while (ch != 0);
 
 	/* SCLP write data */
-	return _sclp_servc(0x00760005, _sclp_work_area);
+	_sclp_servc(0x00760005, _sclp_work_area);
 }
 
-int _sclp_print_early(const char *str)
+/* Output multi-line text (plus a newline) using SCLP VT220
+ * interface.
+ */
+static void _sclp_print_vt220(const char *str)
 {
-	int rc;
+	static unsigned char const write_head[] = {
+		/* sccb header */
+		0x00, 0x0e,
+		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+		/* evbuf header */
+		0x00, 0x06,
+		0x1a, 0x00, 0x00, 0x00,
+	};
+	size_t len = strlen(str);
 
-	rc = _sclp_setup(0);
-	if (rc)
-		return rc;
-	rc = _sclp_print(str);
-	if (rc)
-		return rc;
-	return _sclp_setup(1);
+	if (sizeof(write_head) + len >= sizeof(_sclp_work_area))
+		len = sizeof(_sclp_work_area) - sizeof(write_head) - 1;
+
+	memcpy(_sclp_work_area, write_head, sizeof(write_head));
+	memcpy(_sclp_work_area + sizeof(write_head), str, len);
+	_sclp_work_area[sizeof(write_head) + len] = '\n';
+
+	/* Update length fields in evbuf and sccb headers */
+	*(unsigned short *)(_sclp_work_area + 8) += len + 1;
+	*(unsigned short *)(_sclp_work_area + 0) += len + 1;
+
+	/* SCLP write data */
+	(void)_sclp_servc(0x00760005, _sclp_work_area);
+}
+
+/* Output one or more lines of text on the SCLP console (VT220 and /
+ * or line-mode). All lines get terminated; no need for a trailing LF.
+ */
+void _sclp_print_early(const char *str)
+{
+	if (_sclp_setup(0) != 0)
+		return;
+	if (have_linemode)
+		_sclp_print_lm(str);
+	if (have_vt220)
+		_sclp_print_vt220(str);
+	_sclp_setup(1);
 }
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ce0cbd6ba7ca..d3f9688f26b5 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -80,6 +80,8 @@ EXPORT_SYMBOL(console_irq);
 unsigned long elf_hwcap __read_mostly = 0;
 char elf_platform[ELF_PLATFORM_SIZE];
 
+unsigned long int_hwcap = 0;
+
 int __initdata memory_end_set;
 unsigned long __initdata memory_end;
 unsigned long __initdata max_physmem_end;
@@ -97,7 +99,7 @@ unsigned long MODULES_VADDR;
 unsigned long MODULES_END;
 
 /* An array with a pointer to the lowcore of every CPU. */
-struct _lowcore *lowcore_ptr[NR_CPUS];
+struct lowcore *lowcore_ptr[NR_CPUS];
 EXPORT_SYMBOL(lowcore_ptr);
 
 /*
@@ -291,33 +293,29 @@ void *restart_stack __attribute__((__section__(".data")));
 
 static void __init setup_lowcore(void)
 {
-	struct _lowcore *lc;
+	struct lowcore *lc;
 
 	/*
 	 * Setup lowcore for boot cpu
 	 */
-	BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096);
+	BUILD_BUG_ON(sizeof(struct lowcore) != LC_PAGES * 4096);
 	lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
 	lc->restart_psw.mask = PSW_KERNEL_BITS;
-	lc->restart_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
+	lc->restart_psw.addr = (unsigned long) restart_int_handler;
 	lc->external_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
-	lc->external_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
+	lc->external_new_psw.addr = (unsigned long) ext_int_handler;
 	lc->svc_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
-	lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
+	lc->svc_new_psw.addr = (unsigned long) system_call;
 	lc->program_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
-	lc->program_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) pgm_check_handler;
+	lc->program_new_psw.addr = (unsigned long) pgm_check_handler;
 	lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
-	lc->mcck_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
+	lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler;
 	lc->io_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
-	lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
+	lc->io_new_psw.addr = (unsigned long) io_int_handler;
 	lc->clock_comparator = -1ULL;
 	lc->kernel_stack = ((unsigned long) &init_thread_union)
 		+ THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
@@ -329,6 +327,7 @@ static void __init setup_lowcore(void)
 		+ PAGE_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);
 	lc->current_task = (unsigned long) init_thread_union.thread_info.task;
 	lc->thread_info = (unsigned long) &init_thread_union;
+	lc->lpp = LPP_MAGIC;
 	lc->machine_flags = S390_lowcore.machine_flags;
 	lc->stfl_fac_list = S390_lowcore.stfl_fac_list;
 	memcpy(lc->stfle_fac_list, S390_lowcore.stfle_fac_list,
@@ -376,17 +375,17 @@ static void __init setup_lowcore(void)
 
 static struct resource code_resource = {
 	.name  = "Kernel code",
-	.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource data_resource = {
 	.name = "Kernel data",
-	.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource bss_resource = {
 	.name = "Kernel bss",
-	.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource __initdata *standard_resources[] = {
@@ -410,7 +409,7 @@ static void __init setup_resources(void)
 
 	for_each_memblock(memory, reg) {
 		res = alloc_bootmem_low(sizeof(*res));
-		res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+		res->flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM;
 
 		res->name = "System RAM";
 		res->start = reg->base;
@@ -661,15 +660,6 @@ static void __init reserve_kernel(void)
 #endif
 }
 
-static void __init reserve_elfcorehdr(void)
-{
-#ifdef CONFIG_CRASH_DUMP
-	if (is_kdump_kernel())
-		memblock_reserve(elfcorehdr_addr - OLDMEM_BASE,
-				 PAGE_ALIGN(elfcorehdr_size));
-#endif
-}
-
 static void __init setup_memory(void)
 {
 	struct memblock_region *reg;
@@ -764,9 +754,6 @@ static int __init setup_hwcaps(void)
 	get_cpu_id(&cpu_id);
 	add_device_randomness(&cpu_id, sizeof(cpu_id));
 	switch (cpu_id.machine) {
-	case 0x9672:
-		strcpy(elf_platform, "g5");
-		break;
 	case 0x2064:
 	case 0x2066:
 	default:	/* Use "z900" as default for 64 bit kernels. */
@@ -793,9 +780,17 @@ static int __init setup_hwcaps(void)
 		strcpy(elf_platform, "zEC12");
 		break;
 	case 0x2964:
+	case 0x2965:
 		strcpy(elf_platform, "z13");
 		break;
 	}
+
+	/*
+	 * Virtualization support HWCAP_INT_SIE is bit 0.
+	 */
+	if (sclp.has_sief2)
+		int_hwcap |= HWCAP_INT_SIE;
+
 	return 0;
 }
 arch_initcall(setup_hwcaps);
@@ -844,6 +839,11 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.brk = (unsigned long) &_end;
 
 	parse_early_param();
+#ifdef CONFIG_CRASH_DUMP
+	/* Deactivate elfcorehdr= kernel parameter */
+	elfcorehdr_addr = ELFCORE_ADDR_MAX;
+#endif
+
 	os_info_init();
 	setup_ipl();
 
@@ -852,7 +852,6 @@ void __init setup_arch(char **cmdline_p)
 	reserve_oldmem();
 	reserve_kernel();
 	reserve_initrd();
-	reserve_elfcorehdr();
 	memblock_allow_resize();
 
 	/* Get information about *all* installed memory */
@@ -873,11 +872,13 @@ void __init setup_arch(char **cmdline_p)
 
 	check_initrd();
 	reserve_crashkernel();
+#ifdef CONFIG_CRASH_DUMP
 	/*
 	 * Be aware that smp_save_dump_cpus() triggers a system reset.
 	 * Therefore CPU and device initialization should be done afterwards.
 	 */
 	smp_save_dump_cpus();
+#endif
 
 	setup_resources();
 	setup_vmcoreinfo();
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 028cc46cb82a..d82562cf0a0e 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -331,13 +331,13 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		restorer = (unsigned long) ka->sa.sa_restorer | PSW_ADDR_AMODE;
+		restorer = (unsigned long) ka->sa.sa_restorer;
 	} else {
 		/* Signal frame without vector registers are short ! */
 		__u16 __user *svc = (void __user *) frame + frame_size - 2;
 		if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
 			return -EFAULT;
-		restorer = (unsigned long) svc | PSW_ADDR_AMODE;
+		restorer = (unsigned long) svc;
 	}
 
 	/* Set up registers for signal handler */
@@ -347,7 +347,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
 		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
-	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
+	regs->psw.addr = (unsigned long) ka->sa.sa_handler;
 
 	regs->gprs[2] = sig;
 	regs->gprs[3] = (unsigned long) &frame->sc;
@@ -394,13 +394,12 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
-		restorer = (unsigned long)
-			ksig->ka.sa.sa_restorer | PSW_ADDR_AMODE;
+		restorer = (unsigned long) ksig->ka.sa.sa_restorer;
 	} else {
 		__u16 __user *svc = &frame->svc_insn;
 		if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
 			return -EFAULT;
-		restorer = (unsigned long) svc | PSW_ADDR_AMODE;
+		restorer = (unsigned long) svc;
 	}
 
 	/* Create siginfo on the signal stack */
@@ -426,7 +425,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
 		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
-	regs->psw.addr = (unsigned long) ksig->ka.sa.sa_handler | PSW_ADDR_AMODE;
+	regs->psw.addr = (unsigned long) ksig->ka.sa.sa_handler;
 
 	regs->gprs[2] = ksig->sig;
 	regs->gprs[3] = (unsigned long) &frame->info;
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 9062df575afe..40a6b4f9c36c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -64,8 +64,9 @@ enum {
 static DEFINE_PER_CPU(struct cpu *, cpu_device);
 
 struct pcpu {
-	struct _lowcore *lowcore;	/* lowcore page(s) for the cpu */
+	struct lowcore *lowcore;	/* lowcore page(s) for the cpu */
 	unsigned long ec_mask;		/* bit mask for ec_xxx functions */
+	unsigned long ec_clk;		/* sigp timestamp for ec_xxx */
 	signed char state;		/* physical cpu state */
 	signed char polarization;	/* physical polarization */
 	u16 address;			/* physical cpu address */
@@ -80,6 +81,10 @@ EXPORT_SYMBOL(smp_cpu_mt_shift);
 unsigned int smp_cpu_mtid;
 EXPORT_SYMBOL(smp_cpu_mtid);
 
+#ifdef CONFIG_CRASH_DUMP
+__vector128 __initdata boot_cpu_vector_save_area[__NUM_VXRS];
+#endif
+
 static unsigned int smp_max_threads __initdata = -1U;
 
 static int __init early_nosmt(char *s)
@@ -105,8 +110,7 @@ DEFINE_MUTEX(smp_cpu_state_mutex);
 /*
  * Signal processor helper functions.
  */
-static inline int __pcpu_sigp_relax(u16 addr, u8 order, unsigned long parm,
-				    u32 *status)
+static inline int __pcpu_sigp_relax(u16 addr, u8 order, unsigned long parm)
 {
 	int cc;
 
@@ -171,6 +175,7 @@ static void pcpu_ec_call(struct pcpu *pcpu, int ec_bit)
 	if (test_and_set_bit(ec_bit, &pcpu->ec_mask))
 		return;
 	order = pcpu_running(pcpu) ? SIGP_EXTERNAL_CALL : SIGP_EMERGENCY_SIGNAL;
+	pcpu->ec_clk = get_tod_clock_fast();
 	pcpu_sigp_retry(pcpu, order, 0);
 }
 
@@ -180,10 +185,10 @@ static void pcpu_ec_call(struct pcpu *pcpu, int ec_bit)
 static int pcpu_alloc_lowcore(struct pcpu *pcpu, int cpu)
 {
 	unsigned long async_stack, panic_stack;
-	struct _lowcore *lc;
+	struct lowcore *lc;
 
 	if (pcpu != &pcpu_devices[0]) {
-		pcpu->lowcore =	(struct _lowcore *)
+		pcpu->lowcore =	(struct lowcore *)
 			__get_free_pages(GFP_KERNEL | GFP_DMA, LC_ORDER);
 		async_stack = __get_free_pages(GFP_KERNEL, ASYNC_ORDER);
 		panic_stack = __get_free_page(GFP_KERNEL);
@@ -235,7 +240,7 @@ static void pcpu_free_lowcore(struct pcpu *pcpu)
 
 static void pcpu_prepare_secondary(struct pcpu *pcpu, int cpu)
 {
-	struct _lowcore *lc = pcpu->lowcore;
+	struct lowcore *lc = pcpu->lowcore;
 
 	if (MACHINE_HAS_TLB_LC)
 		cpumask_set_cpu(cpu, &init_mm.context.cpu_attach_mask);
@@ -255,7 +260,7 @@ static void pcpu_prepare_secondary(struct pcpu *pcpu, int cpu)
 
 static void pcpu_attach_task(struct pcpu *pcpu, struct task_struct *tsk)
 {
-	struct _lowcore *lc = pcpu->lowcore;
+	struct lowcore *lc = pcpu->lowcore;
 	struct thread_info *ti = task_thread_info(tsk);
 
 	lc->kernel_stack = (unsigned long) task_stack_page(tsk)
@@ -271,7 +276,7 @@ static void pcpu_attach_task(struct pcpu *pcpu, struct task_struct *tsk)
 
 static void pcpu_start_fn(struct pcpu *pcpu, void (*func)(void *), void *data)
 {
-	struct _lowcore *lc = pcpu->lowcore;
+	struct lowcore *lc = pcpu->lowcore;
 
 	lc->restart_stack = lc->kernel_stack;
 	lc->restart_fn = (unsigned long) func;
@@ -286,7 +291,7 @@ static void pcpu_start_fn(struct pcpu *pcpu, void (*func)(void *), void *data)
 static void pcpu_delegate(struct pcpu *pcpu, void (*func)(void *),
 			  void *data, unsigned long stack)
 {
-	struct _lowcore *lc = lowcore_ptr[pcpu - pcpu_devices];
+	struct lowcore *lc = lowcore_ptr[pcpu - pcpu_devices];
 	unsigned long source_cpu = stap();
 
 	__load_psw_mask(PSW_KERNEL_BITS);
@@ -538,53 +543,24 @@ EXPORT_SYMBOL(smp_ctl_clear_bit);
 
 #ifdef CONFIG_CRASH_DUMP
 
-static void __init __smp_store_cpu_state(struct save_area_ext *sa_ext,
-					 u16 address, int is_boot_cpu)
-{
-	void *lc = (void *)(unsigned long) store_prefix();
-	unsigned long vx_sa;
-
-	if (is_boot_cpu) {
-		/* Copy the registers of the boot CPU. */
-		copy_oldmem_page(1, (void *) &sa_ext->sa, sizeof(sa_ext->sa),
-				 SAVE_AREA_BASE - PAGE_SIZE, 0);
-		if (MACHINE_HAS_VX)
-			save_vx_regs_safe(sa_ext->vx_regs);
-		return;
-	}
-	/* Get the registers of a non-boot cpu. */
-	__pcpu_sigp_relax(address, SIGP_STOP_AND_STORE_STATUS, 0, NULL);
-	memcpy_real(&sa_ext->sa, lc + SAVE_AREA_BASE, sizeof(sa_ext->sa));
-	if (!MACHINE_HAS_VX)
-		return;
-	/* Get the VX registers */
-	vx_sa = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!vx_sa)
-		panic("could not allocate memory for VX save area\n");
-	__pcpu_sigp_relax(address, SIGP_STORE_ADDITIONAL_STATUS, vx_sa, NULL);
-	memcpy(sa_ext->vx_regs, (void *) vx_sa, sizeof(sa_ext->vx_regs));
-	memblock_free(vx_sa, PAGE_SIZE);
-}
-
 int smp_store_status(int cpu)
 {
-	unsigned long vx_sa;
-	struct pcpu *pcpu;
+	struct pcpu *pcpu = pcpu_devices + cpu;
+	unsigned long pa;
 
-	pcpu = pcpu_devices + cpu;
-	if (__pcpu_sigp_relax(pcpu->address, SIGP_STOP_AND_STORE_STATUS,
-			      0, NULL) != SIGP_CC_ORDER_CODE_ACCEPTED)
+	pa = __pa(&pcpu->lowcore->floating_pt_save_area);
+	if (__pcpu_sigp_relax(pcpu->address, SIGP_STORE_STATUS_AT_ADDRESS,
+			      pa) != SIGP_CC_ORDER_CODE_ACCEPTED)
 		return -EIO;
 	if (!MACHINE_HAS_VX)
 		return 0;
-	vx_sa = __pa(pcpu->lowcore->vector_save_area_addr);
-	__pcpu_sigp_relax(pcpu->address, SIGP_STORE_ADDITIONAL_STATUS,
-			  vx_sa, NULL);
+	pa = __pa(pcpu->lowcore->vector_save_area_addr);
+	if (__pcpu_sigp_relax(pcpu->address, SIGP_STORE_ADDITIONAL_STATUS,
+			      pa) != SIGP_CC_ORDER_CODE_ACCEPTED)
+		return -EIO;
 	return 0;
 }
 
-#endif /* CONFIG_CRASH_DUMP */
-
 /*
  * Collect CPU state of the previous, crashed system.
  * There are four cases:
@@ -593,7 +569,7 @@ int smp_store_status(int cpu)
  *    The state for all CPUs except the boot CPU needs to be collected
  *    with sigp stop-and-store-status. The boot CPU state is located in
  *    the absolute lowcore of the memory stored in the HSA. The zcore code
- *    will allocate the save area and copy the boot CPU state from the HSA.
+ *    will copy the boot CPU state from the HSA.
  * 2) stand-alone kdump for SCSI (zfcp dump with swapped memory)
  *    condition: OLDMEM_BASE != NULL && ipl_info.type == IPL_TYPE_FCP_DUMP
  *    The state for all CPUs except the boot CPU needs to be collected
@@ -608,55 +584,76 @@ int smp_store_status(int cpu)
  *    stored the registers of the boot CPU in the memory of the old system.
  * 4) kdump and the old kernel stored the CPU state
  *    condition: OLDMEM_BASE != NULL && is_kdump_kernel()
- *    The state of all CPUs is stored in ELF sections in the memory of the
- *    old system. The ELF sections are picked up by the crash_dump code
- *    via elfcorehdr_addr.
+ *    This case does not exist for s390 anymore, setup_arch explicitly
+ *    deactivates the elfcorehdr= kernel parameter
  */
+static __init void smp_save_cpu_vxrs(struct save_area *sa, u16 addr,
+				     bool is_boot_cpu, unsigned long page)
+{
+	__vector128 *vxrs = (__vector128 *) page;
+
+	if (is_boot_cpu)
+		vxrs = boot_cpu_vector_save_area;
+	else
+		__pcpu_sigp_relax(addr, SIGP_STORE_ADDITIONAL_STATUS, page);
+	save_area_add_vxrs(sa, vxrs);
+}
+
+static __init void smp_save_cpu_regs(struct save_area *sa, u16 addr,
+				     bool is_boot_cpu, unsigned long page)
+{
+	void *regs = (void *) page;
+
+	if (is_boot_cpu)
+		copy_oldmem_kernel(regs, (void *) __LC_FPREGS_SAVE_AREA, 512);
+	else
+		__pcpu_sigp_relax(addr, SIGP_STORE_STATUS_AT_ADDRESS, page);
+	save_area_add_regs(sa, regs);
+}
+
 void __init smp_save_dump_cpus(void)
 {
-#ifdef CONFIG_CRASH_DUMP
-	int addr, cpu, boot_cpu_addr, max_cpu_addr;
-	struct save_area_ext *sa_ext;
+	int addr, boot_cpu_addr, max_cpu_addr;
+	struct save_area *sa;
+	unsigned long page;
 	bool is_boot_cpu;
 
-	if (is_kdump_kernel())
-		/* Previous system stored the CPU states. Nothing to do. */
-		return;
 	if (!(OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP))
 		/* No previous system present, normal boot. */
 		return;
+	/* Allocate a page as dumping area for the store status sigps */
+	page = memblock_alloc_base(PAGE_SIZE, PAGE_SIZE, 1UL << 31);
 	/* Set multi-threading state to the previous system. */
 	pcpu_set_smt(sclp.mtid_prev);
-	max_cpu_addr = SCLP_MAX_CORES << sclp.mtid_prev;
-	for (cpu = 0, addr = 0; addr <= max_cpu_addr; addr++) {
-		if (__pcpu_sigp_relax(addr, SIGP_SENSE, 0, NULL) ==
-		    SIGP_CC_NOT_OPERATIONAL)
-			continue;
-		cpu += 1;
-	}
-	dump_save_areas.areas = (void *)memblock_alloc(sizeof(void *) * cpu, 8);
-	dump_save_areas.count = cpu;
 	boot_cpu_addr = stap();
-	for (cpu = 0, addr = 0; addr <= max_cpu_addr; addr++) {
-		if (__pcpu_sigp_relax(addr, SIGP_SENSE, 0, NULL) ==
+	max_cpu_addr = SCLP_MAX_CORES << sclp.mtid_prev;
+	for (addr = 0; addr <= max_cpu_addr; addr++) {
+		if (__pcpu_sigp_relax(addr, SIGP_SENSE, 0) ==
 		    SIGP_CC_NOT_OPERATIONAL)
 			continue;
-		sa_ext = (void *) memblock_alloc(sizeof(*sa_ext), 8);
-		dump_save_areas.areas[cpu] = sa_ext;
-		if (!sa_ext)
-			panic("could not allocate memory for save area\n");
 		is_boot_cpu = (addr == boot_cpu_addr);
-		cpu += 1;
-		if (is_boot_cpu && !OLDMEM_BASE)
-			/* Skip boot CPU for standard zfcp dump. */
-			continue;
-		/* Get state for this CPU. */
-		__smp_store_cpu_state(sa_ext, addr, is_boot_cpu);
+		/* Allocate save area */
+		sa = save_area_alloc(is_boot_cpu);
+		if (!sa)
+			panic("could not allocate memory for save area\n");
+		if (MACHINE_HAS_VX)
+			/* Get the vector registers */
+			smp_save_cpu_vxrs(sa, addr, is_boot_cpu, page);
+		/*
+		 * For a zfcp dump OLDMEM_BASE == NULL and the registers
+		 * of the boot CPU are stored in the HSA. To retrieve
+		 * these registers an SCLP request is required which is
+		 * done by drivers/s390/char/zcore.c:init_cpu_info()
+		 */
+		if (!is_boot_cpu || OLDMEM_BASE)
+			/* Get the CPU registers */
+			smp_save_cpu_regs(sa, addr, is_boot_cpu, page);
 	}
+	memblock_free(page, PAGE_SIZE);
 	diag308_reset();
 	pcpu_set_smt(0);
-#endif /* CONFIG_CRASH_DUMP */
 }
+#endif /* CONFIG_CRASH_DUMP */
 
 void smp_cpu_set_polarization(int cpu, int val)
 {
@@ -680,7 +677,7 @@ static struct sclp_core_info *smp_get_core_info(void)
 		for (address = 0;
 		     address < (SCLP_MAX_CORES << smp_cpu_mt_shift);
 		     address += (1U << smp_cpu_mt_shift)) {
-			if (__pcpu_sigp_relax(address, SIGP_SENSE, 0, NULL) ==
+			if (__pcpu_sigp_relax(address, SIGP_SENSE, 0) ==
 			    SIGP_CC_NOT_OPERATIONAL)
 				continue;
 			info->core[info->configured].core_id =
@@ -801,7 +798,7 @@ static void smp_start_secondary(void *cpuvoid)
 	set_cpu_online(smp_processor_id(), true);
 	inc_irq_stat(CPU_RST);
 	local_irq_enable();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 /* Upping and downing of CPUs */
@@ -924,7 +921,7 @@ void __init smp_prepare_boot_cpu(void)
 
 	pcpu->state = CPU_STATE_CONFIGURED;
 	pcpu->address = stap();
-	pcpu->lowcore = (struct _lowcore *)(unsigned long) store_prefix();
+	pcpu->lowcore = (struct lowcore *)(unsigned long) store_prefix();
 	S390_lowcore.percpu_offset = __per_cpu_offset[0];
 	smp_cpu_set_polarization(0, POLARIZATION_UNKNOWN);
 	set_cpu_present(0, true);
diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c
index 1785cd82253c..44f84b23d4e5 100644
--- a/arch/s390/kernel/stacktrace.c
+++ b/arch/s390/kernel/stacktrace.c
@@ -10,87 +10,64 @@
 #include <linux/kallsyms.h>
 #include <linux/module.h>
 
-static unsigned long save_context_stack(struct stack_trace *trace,
-					unsigned long sp,
-					unsigned long low,
-					unsigned long high,
-					int savesched)
+static int __save_address(void *data, unsigned long address, int nosched)
 {
-	struct stack_frame *sf;
-	struct pt_regs *regs;
-	unsigned long addr;
+	struct stack_trace *trace = data;
 
-	while(1) {
-		sp &= PSW_ADDR_INSN;
-		if (sp < low || sp > high)
-			return sp;
-		sf = (struct stack_frame *)sp;
-		while(1) {
-			addr = sf->gprs[8] & PSW_ADDR_INSN;
-			if (!trace->skip)
-				trace->entries[trace->nr_entries++] = addr;
-			else
-				trace->skip--;
-			if (trace->nr_entries >= trace->max_entries)
-				return sp;
-			low = sp;
-			sp = sf->back_chain & PSW_ADDR_INSN;
-			if (!sp)
-				break;
-			if (sp <= low || sp > high - sizeof(*sf))
-				return sp;
-			sf = (struct stack_frame *)sp;
-		}
-		/* Zero backchain detected, check for interrupt frame. */
-		sp = (unsigned long)(sf + 1);
-		if (sp <= low || sp > high - sizeof(*regs))
-			return sp;
-		regs = (struct pt_regs *)sp;
-		addr = regs->psw.addr & PSW_ADDR_INSN;
-		if (savesched || !in_sched_functions(addr)) {
-			if (!trace->skip)
-				trace->entries[trace->nr_entries++] = addr;
-			else
-				trace->skip--;
-		}
-		if (trace->nr_entries >= trace->max_entries)
-			return sp;
-		low = sp;
-		sp = regs->gprs[15];
+	if (nosched && in_sched_functions(address))
+		return 0;
+	if (trace->skip > 0) {
+		trace->skip--;
+		return 0;
 	}
+	if (trace->nr_entries < trace->max_entries) {
+		trace->entries[trace->nr_entries++] = address;
+		return 0;
+	}
+	return 1;
+}
+
+static int save_address(void *data, unsigned long address)
+{
+	return __save_address(data, address, 0);
+}
+
+static int save_address_nosched(void *data, unsigned long address)
+{
+	return __save_address(data, address, 1);
 }
 
 void save_stack_trace(struct stack_trace *trace)
 {
-	register unsigned long sp asm ("15");
-	unsigned long orig_sp, new_sp;
+	unsigned long sp;
 
-	orig_sp = sp & PSW_ADDR_INSN;
-	new_sp = save_context_stack(trace, orig_sp,
-				    S390_lowcore.panic_stack - PAGE_SIZE,
-				    S390_lowcore.panic_stack, 1);
-	if (new_sp != orig_sp)
-		return;
-	new_sp = save_context_stack(trace, new_sp,
-				    S390_lowcore.async_stack - ASYNC_SIZE,
-				    S390_lowcore.async_stack, 1);
-	if (new_sp != orig_sp)
-		return;
-	save_context_stack(trace, new_sp,
-			   S390_lowcore.thread_info,
-			   S390_lowcore.thread_info + THREAD_SIZE, 1);
+	sp = current_stack_pointer();
+	dump_trace(save_address, trace, NULL, sp);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-	unsigned long sp, low, high;
+	unsigned long sp;
 
-	sp = tsk->thread.ksp & PSW_ADDR_INSN;
-	low = (unsigned long) task_stack_page(tsk);
-	high = (unsigned long) task_pt_regs(tsk);
-	save_context_stack(trace, sp, low, high, 0);
+	sp = tsk->thread.ksp;
+	if (tsk == current)
+		sp = current_stack_pointer();
+	dump_trace(save_address_nosched, trace, tsk, sp);
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
+
+void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace)
+{
+	unsigned long sp;
+
+	sp = kernel_stack_pointer(regs);
+	dump_trace(save_address, trace, NULL, sp);
+	if (trace->nr_entries < trace->max_entries)
+		trace->entries[trace->nr_entries++] = ULONG_MAX;
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_regs);
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 8c56929c8d82..9b59e6212d8f 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -382,3 +382,7 @@ SYSCALL(sys_sendmsg,compat_sys_sendmsg)			/* 370 */
 SYSCALL(sys_recvfrom,compat_sys_recvfrom)
 SYSCALL(sys_recvmsg,compat_sys_recvmsg)
 SYSCALL(sys_shutdown,sys_shutdown)
+SYSCALL(sys_mlock2,compat_sys_mlock2)
+SYSCALL(sys_copy_file_range,compat_sys_copy_file_range) /* 375 */
+SYSCALL(sys_preadv2,compat_sys_preadv2)
+SYSCALL(sys_pwritev2,compat_sys_pwritev2)
diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c
index 99babea026ca..f7dba3887a54 100644
--- a/arch/s390/kernel/sysinfo.c
+++ b/arch/s390/kernel/sysinfo.c
@@ -111,8 +111,7 @@ static void stsi_1_1_1(struct seq_file *m, struct sysinfo_1_1_1 *info)
 
 static void stsi_15_1_x(struct seq_file *m, struct sysinfo_15_1_x *info)
 {
-	static int max_mnest;
-	int i, rc;
+	int i;
 
 	seq_putc(m, '\n');
 	if (!MACHINE_HAS_TOPOLOGY)
@@ -123,7 +122,7 @@ static void stsi_15_1_x(struct seq_file *m, struct sysinfo_15_1_x *info)
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
 		seq_printf(m, " %d", info->mag[i]);
 	seq_putc(m, '\n');
-#ifdef CONFIG_SCHED_MC
+#ifdef CONFIG_SCHED_TOPOLOGY
 	store_topology(info);
 	seq_printf(m, "CPU Topology SW:     ");
 	for (i = 0; i < TOPOLOGY_NR_MAG; i++)
@@ -145,6 +144,10 @@ static void stsi_1_2_2(struct seq_file *m, struct sysinfo_1_2_2 *info)
 	seq_printf(m, "CPUs Configured:      %d\n", info->cpus_configured);
 	seq_printf(m, "CPUs Standby:         %d\n", info->cpus_standby);
 	seq_printf(m, "CPUs Reserved:        %d\n", info->cpus_reserved);
+	if (info->mt_installed) {
+		seq_printf(m, "CPUs G-MTID:          %d\n", info->mt_gtid);
+		seq_printf(m, "CPUs S-MTID:          %d\n", info->mt_stid);
+	}
 	/*
 	 * Sigh 2. According to the specification the alternate
 	 * capability field is a 32 bit floating point number
@@ -194,13 +197,10 @@ static void stsi_2_2_2(struct seq_file *m, struct sysinfo_2_2_2 *info)
 	seq_printf(m, "LPAR CPUs Reserved:   %d\n", info->cpus_reserved);
 	seq_printf(m, "LPAR CPUs Dedicated:  %d\n", info->cpus_dedicated);
 	seq_printf(m, "LPAR CPUs Shared:     %d\n", info->cpus_shared);
-	if (info->mt_installed & 0x80) {
-		seq_printf(m, "LPAR CPUs G-MTID:     %d\n",
-			   info->mt_general & 0x1f);
-		seq_printf(m, "LPAR CPUs S-MTID:     %d\n",
-			   info->mt_installed & 0x1f);
-		seq_printf(m, "LPAR CPUs PS-MTID:    %d\n",
-			   info->mt_psmtid & 0x1f);
+	if (info->mt_installed) {
+		seq_printf(m, "LPAR CPUs G-MTID:     %d\n", info->mt_gtid);
+		seq_printf(m, "LPAR CPUs S-MTID:     %d\n", info->mt_stid);
+		seq_printf(m, "LPAR CPUs PS-MTID:    %d\n", info->mt_psmtid);
 	}
 }
 
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 99f84ac31307..9409d32f285e 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -499,8 +499,7 @@ static void etr_reset(void)
 		if (etr_port0_online && etr_port1_online)
 			set_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
 	} else if (etr_port0_online || etr_port1_online) {
-		pr_warning("The real or virtual hardware system does "
-			   "not provide an ETR interface\n");
+		pr_warn("The real or virtual hardware system does not provide an ETR interface\n");
 		etr_port0_online = etr_port1_online = 0;
 	}
 }
@@ -1433,7 +1432,7 @@ device_initcall(etr_init_sysfs);
 /*
  * Server Time Protocol (STP) code.
  */
-static int stp_online;
+static bool stp_online;
 static struct stp_sstpi stp_info;
 static void *stp_page;
 
@@ -1444,11 +1443,7 @@ static struct timer_list stp_timer;
 
 static int __init early_parse_stp(char *p)
 {
-	if (strncmp(p, "off", 3) == 0)
-		stp_online = 0;
-	else if (strncmp(p, "on", 2) == 0)
-		stp_online = 1;
-	return 0;
+	return kstrtobool(p, &stp_online);
 }
 early_param("stp", early_parse_stp);
 
@@ -1464,8 +1459,7 @@ static void __init stp_reset(void)
 	if (rc == 0)
 		set_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags);
 	else if (stp_online) {
-		pr_warning("The real or virtual hardware system does "
-			   "not provide an STP interface\n");
+		pr_warn("The real or virtual hardware system does not provide an STP interface\n");
 		free_page((unsigned long) stp_page);
 		stp_page = NULL;
 		stp_online = 0;
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 40b8102fdadb..64298a867589 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -37,7 +37,7 @@ static void set_topology_timer(void);
 static void topology_work_fn(struct work_struct *work);
 static struct sysinfo_15_1_x *tl_info;
 
-static int topology_enabled = 1;
+static bool topology_enabled = true;
 static DECLARE_WORK(topology_work, topology_work_fn);
 
 /*
@@ -444,10 +444,7 @@ static const struct cpumask *cpu_book_mask(int cpu)
 
 static int __init early_parse_topology(char *p)
 {
-	if (strncmp(p, "off", 3))
-		return 0;
-	topology_enabled = 0;
-	return 0;
+	return kstrtobool(p, &topology_enabled);
 }
 early_param("topology", early_parse_topology);
 
diff --git a/arch/s390/kernel/trace.c b/arch/s390/kernel/trace.c
index 73239bb576c4..dde7654f5c68 100644
--- a/arch/s390/kernel/trace.c
+++ b/arch/s390/kernel/trace.c
@@ -9,20 +9,23 @@
 #define CREATE_TRACE_POINTS
 #include <asm/trace/diag.h>
 
-EXPORT_TRACEPOINT_SYMBOL(diagnose);
+EXPORT_TRACEPOINT_SYMBOL(s390_diagnose);
 
 static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
 
-void trace_diagnose_norecursion(int diag_nr)
+void trace_s390_diagnose_norecursion(int diag_nr)
 {
 	unsigned long flags;
 	unsigned int *depth;
 
+	/* Avoid lockdep recursion. */
+	if (IS_ENABLED(CONFIG_LOCKDEP))
+		return;
 	local_irq_save(flags);
 	depth = this_cpu_ptr(&diagnose_trace_depth);
 	if (*depth == 0) {
 		(*depth)++;
-		trace_diagnose(diag_nr);
+		trace_s390_diagnose(diag_nr);
 		(*depth)--;
 	}
 	local_irq_restore(flags);
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 1b18118bbc06..dd97a3e8a34a 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -22,8 +22,6 @@
 #include <asm/fpu/api.h>
 #include "entry.h"
 
-int show_unhandled_signals = 1;
-
 static inline void __user *get_trap_ip(struct pt_regs *regs)
 {
 	unsigned long address;
@@ -32,23 +30,7 @@ static inline void __user *get_trap_ip(struct pt_regs *regs)
 		address = *(unsigned long *)(current->thread.trap_tdb + 24);
 	else
 		address = regs->psw.addr;
-	return (void __user *)
-		((address - (regs->int_code >> 16)) & PSW_ADDR_INSN);
-}
-
-static inline void report_user_fault(struct pt_regs *regs, int signr)
-{
-	if ((task_pid_nr(current) > 1) && !show_unhandled_signals)
-		return;
-	if (!unhandled_signal(current, signr))
-		return;
-	if (!printk_ratelimit())
-		return;
-	printk("User process fault: interruption code %04x ilc:%d ",
-	       regs->int_code & 0xffff, regs->int_code >> 17);
-	print_vma_addr("in ", regs->psw.addr & PSW_ADDR_INSN);
-	printk("\n");
-	show_regs(regs);
+	return (void __user *) (address - (regs->int_code >> 16));
 }
 
 int is_valid_bugaddr(unsigned long addr)
@@ -66,16 +48,16 @@ void do_report_trap(struct pt_regs *regs, int si_signo, int si_code, char *str)
 		info.si_code = si_code;
 		info.si_addr = get_trap_ip(regs);
 		force_sig_info(si_signo, &info, current);
-		report_user_fault(regs, si_signo);
+		report_user_fault(regs, si_signo, 0);
         } else {
                 const struct exception_table_entry *fixup;
-                fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
+		fixup = search_exception_tables(regs->psw.addr);
                 if (fixup)
-			regs->psw.addr = extable_fixup(fixup) | PSW_ADDR_AMODE;
+			regs->psw.addr = extable_fixup(fixup);
 		else {
 			enum bug_trap_type btt;
 
-			btt = report_bug(regs->psw.addr & PSW_ADDR_INSN, regs);
+			btt = report_bug(regs->psw.addr, regs);
 			if (btt == BUG_TRAP_TYPE_WARN)
 				return;
 			die(regs, str);
@@ -112,7 +94,7 @@ NOKPROBE_SYMBOL(do_per_trap);
 void default_trap_handler(struct pt_regs *regs)
 {
 	if (user_mode(regs)) {
-		report_user_fault(regs, SIGSEGV);
+		report_user_fault(regs, SIGSEGV, 0);
 		do_exit(SIGSEGV);
 	} else
 		die(regs, "Unknown program exception");
@@ -260,11 +242,8 @@ void vector_exception(struct pt_regs *regs)
 
 void data_exception(struct pt_regs *regs)
 {
-	__u16 __user *location;
 	int signal = 0;
 
-	location = get_trap_ip(regs);
-
 	save_fpu_regs();
 	if (current->thread.fpu.fpc & FPC_DXC_MASK)
 		signal = SIGFPE;
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index 59eddb0e1a3e..94495cac8be3 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -80,7 +80,7 @@ struct vdso_data *vdso_data = &vdso_data_store.data;
 /*
  * Setup vdso data page.
  */
-static void vdso_init_data(struct vdso_data *vd)
+static void __init vdso_init_data(struct vdso_data *vd)
 {
 	vd->ectg_available = test_facility(31);
 }
@@ -90,9 +90,10 @@ static void vdso_init_data(struct vdso_data *vd)
  */
 #define SEGMENT_ORDER	2
 
-int vdso_alloc_per_cpu(struct _lowcore *lowcore)
+int vdso_alloc_per_cpu(struct lowcore *lowcore)
 {
 	unsigned long segment_table, page_table, page_frame;
+	struct vdso_per_cpu_data *vd;
 	u32 *psal, *aste;
 	int i;
 
@@ -107,6 +108,12 @@ int vdso_alloc_per_cpu(struct _lowcore *lowcore)
 	if (!segment_table || !page_table || !page_frame)
 		goto out;
 
+	/* Initialize per-cpu vdso data page */
+	vd = (struct vdso_per_cpu_data *) page_frame;
+	vd->cpu_nr = lowcore->cpu_nr;
+	vd->node_id = cpu_to_node(vd->cpu_nr);
+
+	/* Set up access register mode page table */
 	clear_table((unsigned long *) segment_table, _SEGMENT_ENTRY_EMPTY,
 		    PAGE_SIZE << SEGMENT_ORDER);
 	clear_table((unsigned long *) page_table, _PAGE_INVALID,
@@ -138,7 +145,7 @@ out:
 	return -ENOMEM;
 }
 
-void vdso_free_per_cpu(struct _lowcore *lowcore)
+void vdso_free_per_cpu(struct lowcore *lowcore)
 {
 	unsigned long segment_table, page_table, page_frame;
 	u32 *psal, *aste;
@@ -163,7 +170,7 @@ static void vdso_init_cr5(void)
 
 	if (!vdso_enabled)
 		return;
-	cr5 = offsetof(struct _lowcore, paste);
+	cr5 = offsetof(struct lowcore, paste);
 	__ctl_load(cr5, 5, 5);
 }
 
@@ -299,8 +306,6 @@ static int __init vdso_init(void)
 
 	get_page(virt_to_page(vdso_data));
 
-	smp_mb();
-
 	return 0;
 }
 early_initcall(vdso_init);
diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile
index ee8a18e50a25..f9c459586649 100644
--- a/arch/s390/kernel/vdso32/Makefile
+++ b/arch/s390/kernel/vdso32/Makefile
@@ -1,6 +1,6 @@
 # List of files in the vdso, has to be asm only for now
 
-obj-vdso32 = gettimeofday.o clock_getres.o clock_gettime.o note.o
+obj-vdso32 = gettimeofday.o clock_getres.o clock_gettime.o note.o getcpu.o
 
 # Build rules
 
diff --git a/arch/s390/kernel/vdso32/getcpu.S b/arch/s390/kernel/vdso32/getcpu.S
new file mode 100644
index 000000000000..c1ed0b72030f
--- /dev/null
+++ b/arch/s390/kernel/vdso32/getcpu.S
@@ -0,0 +1,43 @@
+/*
+ * Userland implementation of getcpu() for 32 bits processes in a
+ * s390 kernel for use in the vDSO
+ *
+ *  Copyright IBM Corp. 2016
+ *  Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+#include <asm/vdso.h>
+#include <asm/asm-offsets.h>
+
+	.text
+	.align 4
+	.globl __kernel_getcpu
+	.type  __kernel_getcpu,@function
+__kernel_getcpu:
+	.cfi_startproc
+	ear	%r1,%a4
+	lhi	%r4,1
+	sll	%r4,24
+	sar	%a4,%r4
+	la	%r4,0
+	epsw	%r0,0
+	sacf	512
+	l	%r5,__VDSO_CPU_NR(%r4)
+	l	%r4,__VDSO_NODE_ID(%r4)
+	tml	%r0,0x4000
+	jo	1f
+	tml	%r0,0x8000
+	jno	0f
+	sacf	256
+	j	1f
+0:	sacf	0
+1:	sar	%a4,%r1
+	ltr	%r2,%r2
+	jz	2f
+	st	%r5,0(%r2)
+2:	ltr	%r3,%r3
+	jz	3f
+	st	%r4,0(%r3)
+3:	lhi	%r2,0
+	br	%r14
+	.cfi_endproc
+	.size	__kernel_getcpu,.-__kernel_getcpu
diff --git a/arch/s390/kernel/vdso32/vdso32.lds.S b/arch/s390/kernel/vdso32/vdso32.lds.S
index a8c379fa1247..8f048c2d6d13 100644
--- a/arch/s390/kernel/vdso32/vdso32.lds.S
+++ b/arch/s390/kernel/vdso32/vdso32.lds.S
@@ -132,6 +132,7 @@ VERSION
 		__kernel_gettimeofday;
 		__kernel_clock_gettime;
 		__kernel_clock_getres;
+		__kernel_getcpu;
 
 	local: *;
 	};
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index c4b03f9ed228..058659c1b8cf 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -1,6 +1,6 @@
 # List of files in the vdso, has to be asm only for now
 
-obj-vdso64 = gettimeofday.o clock_getres.o clock_gettime.o note.o
+obj-vdso64 = gettimeofday.o clock_getres.o clock_gettime.o note.o getcpu.o
 
 # Build rules
 
diff --git a/arch/s390/kernel/vdso64/getcpu.S b/arch/s390/kernel/vdso64/getcpu.S
new file mode 100644
index 000000000000..4cbe98291931
--- /dev/null
+++ b/arch/s390/kernel/vdso64/getcpu.S
@@ -0,0 +1,42 @@
+/*
+ * Userland implementation of getcpu() for 64 bits processes in a
+ * s390 kernel for use in the vDSO
+ *
+ *  Copyright IBM Corp. 2016
+ *  Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+#include <asm/vdso.h>
+#include <asm/asm-offsets.h>
+
+	.text
+	.align 4
+	.globl __kernel_getcpu
+	.type  __kernel_getcpu,@function
+__kernel_getcpu:
+	.cfi_startproc
+	ear	%r1,%a4
+	llilh	%r4,0x0100
+	sar	%a4,%r4
+	la	%r4,0
+	epsw	%r0,0
+	sacf	512
+	l	%r5,__VDSO_CPU_NR(%r4)
+	l	%r4,__VDSO_NODE_ID(%r4)
+	tml	%r0,0x4000
+	jo	1f
+	tml	%r0,0x8000
+	jno	0f
+	sacf	256
+	j	1f
+0:	sacf	0
+1:	sar	%a4,%r1
+	ltgr	%r2,%r2
+	jz	2f
+	st	%r5,0(%r2)
+2:	ltgr	%r3,%r3
+	jz	3f
+	st	%r4,0(%r3)
+3:	lghi	%r2,0
+	br	%r14
+	.cfi_endproc
+	.size	__kernel_getcpu,.-__kernel_getcpu
diff --git a/arch/s390/kernel/vdso64/vdso64.lds.S b/arch/s390/kernel/vdso64/vdso64.lds.S
index 9f5979d102a9..f35455d497fe 100644
--- a/arch/s390/kernel/vdso64/vdso64.lds.S
+++ b/arch/s390/kernel/vdso64/vdso64.lds.S
@@ -132,6 +132,7 @@ VERSION
 		__kernel_gettimeofday;
 		__kernel_clock_gettime;
 		__kernel_clock_getres;
+		__kernel_getcpu;
 
 	local: *;
 	};
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 445657fe658c..0f41a8286378 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -28,6 +28,7 @@ SECTIONS
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0x0700
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 5fce52cf0e57..5ea5af3c7db7 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -29,6 +29,7 @@ config KVM
 	select HAVE_KVM_IRQFD
 	select HAVE_KVM_IRQ_ROUTING
 	select SRCU
+	select KVM_VFIO
 	---help---
 	  Support hosting paravirtualized guest machines using the SIE
 	  virtualization capability on the mainframe. This should work
diff --git a/arch/s390/kvm/Makefile b/arch/s390/kvm/Makefile
index b3b553469650..d42fa38c2429 100644
--- a/arch/s390/kvm/Makefile
+++ b/arch/s390/kvm/Makefile
@@ -7,7 +7,7 @@
 # as published by the Free Software Foundation.
 
 KVM := ../../../virt/kvm
-common-objs = $(KVM)/kvm_main.o $(KVM)/eventfd.o  $(KVM)/async_pf.o $(KVM)/irqchip.o
+common-objs = $(KVM)/kvm_main.o $(KVM)/eventfd.o  $(KVM)/async_pf.o $(KVM)/irqchip.o $(KVM)/vfio.o
 
 ccflags-y := -Ivirt/kvm -Iarch/s390/kvm
 
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index 5fbfb88f8477..1ea4095b67d7 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -14,6 +14,7 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include <asm/pgalloc.h>
+#include <asm/gmap.h>
 #include <asm/virtio-ccw.h>
 #include "kvm-s390.h"
 #include "trace.h"
@@ -155,10 +156,8 @@ static int __diag_time_slice_end(struct kvm_vcpu *vcpu)
 
 static int __diag_time_slice_end_directed(struct kvm_vcpu *vcpu)
 {
-	struct kvm *kvm = vcpu->kvm;
 	struct kvm_vcpu *tcpu;
 	int tid;
-	int i;
 
 	tid = vcpu->run->s.regs.gprs[(vcpu->arch.sie_block->ipa & 0xf0) >> 4];
 	vcpu->stat.diagnose_9c++;
@@ -167,12 +166,9 @@ static int __diag_time_slice_end_directed(struct kvm_vcpu *vcpu)
 	if (tid == vcpu->vcpu_id)
 		return 0;
 
-	kvm_for_each_vcpu(i, tcpu, kvm)
-		if (tcpu->vcpu_id == tid) {
-			kvm_vcpu_yield_to(tcpu);
-			break;
-		}
-
+	tcpu = kvm_get_vcpu_by_id(vcpu->kvm, tid);
+	if (tcpu)
+		kvm_vcpu_yield_to(tcpu);
 	return 0;
 }
 
diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c
index a7559f7207df..66938d283b77 100644
--- a/arch/s390/kvm/gaccess.c
+++ b/arch/s390/kvm/gaccess.c
@@ -259,10 +259,14 @@ struct aste {
 
 int ipte_lock_held(struct kvm_vcpu *vcpu)
 {
-	union ipte_control *ic = &vcpu->kvm->arch.sca->ipte_control;
+	if (vcpu->arch.sie_block->eca & 1) {
+		int rc;
 
-	if (vcpu->arch.sie_block->eca & 1)
-		return ic->kh != 0;
+		read_lock(&vcpu->kvm->arch.sca_lock);
+		rc = kvm_s390_get_ipte_control(vcpu->kvm)->kh != 0;
+		read_unlock(&vcpu->kvm->arch.sca_lock);
+		return rc;
+	}
 	return vcpu->kvm->arch.ipte_lock_count != 0;
 }
 
@@ -274,16 +278,20 @@ static void ipte_lock_simple(struct kvm_vcpu *vcpu)
 	vcpu->kvm->arch.ipte_lock_count++;
 	if (vcpu->kvm->arch.ipte_lock_count > 1)
 		goto out;
-	ic = &vcpu->kvm->arch.sca->ipte_control;
+retry:
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	ic = kvm_s390_get_ipte_control(vcpu->kvm);
 	do {
 		old = READ_ONCE(*ic);
-		while (old.k) {
+		if (old.k) {
+			read_unlock(&vcpu->kvm->arch.sca_lock);
 			cond_resched();
-			old = READ_ONCE(*ic);
+			goto retry;
 		}
 		new = old;
 		new.k = 1;
 	} while (cmpxchg(&ic->val, old.val, new.val) != old.val);
+	read_unlock(&vcpu->kvm->arch.sca_lock);
 out:
 	mutex_unlock(&vcpu->kvm->arch.ipte_mutex);
 }
@@ -296,12 +304,14 @@ static void ipte_unlock_simple(struct kvm_vcpu *vcpu)
 	vcpu->kvm->arch.ipte_lock_count--;
 	if (vcpu->kvm->arch.ipte_lock_count)
 		goto out;
-	ic = &vcpu->kvm->arch.sca->ipte_control;
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	ic = kvm_s390_get_ipte_control(vcpu->kvm);
 	do {
 		old = READ_ONCE(*ic);
 		new = old;
 		new.k = 0;
 	} while (cmpxchg(&ic->val, old.val, new.val) != old.val);
+	read_unlock(&vcpu->kvm->arch.sca_lock);
 	wake_up(&vcpu->kvm->arch.ipte_wq);
 out:
 	mutex_unlock(&vcpu->kvm->arch.ipte_mutex);
@@ -311,24 +321,29 @@ static void ipte_lock_siif(struct kvm_vcpu *vcpu)
 {
 	union ipte_control old, new, *ic;
 
-	ic = &vcpu->kvm->arch.sca->ipte_control;
+retry:
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	ic = kvm_s390_get_ipte_control(vcpu->kvm);
 	do {
 		old = READ_ONCE(*ic);
-		while (old.kg) {
+		if (old.kg) {
+			read_unlock(&vcpu->kvm->arch.sca_lock);
 			cond_resched();
-			old = READ_ONCE(*ic);
+			goto retry;
 		}
 		new = old;
 		new.k = 1;
 		new.kh++;
 	} while (cmpxchg(&ic->val, old.val, new.val) != old.val);
+	read_unlock(&vcpu->kvm->arch.sca_lock);
 }
 
 static void ipte_unlock_siif(struct kvm_vcpu *vcpu)
 {
 	union ipte_control old, new, *ic;
 
-	ic = &vcpu->kvm->arch.sca->ipte_control;
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	ic = kvm_s390_get_ipte_control(vcpu->kvm);
 	do {
 		old = READ_ONCE(*ic);
 		new = old;
@@ -336,6 +351,7 @@ static void ipte_unlock_siif(struct kvm_vcpu *vcpu)
 		if (!new.kh)
 			new.k = 0;
 	} while (cmpxchg(&ic->val, old.val, new.val) != old.val);
+	read_unlock(&vcpu->kvm->arch.sca_lock);
 	if (!new.kh)
 		wake_up(&vcpu->kvm->arch.ipte_wq);
 }
@@ -357,7 +373,7 @@ void ipte_unlock(struct kvm_vcpu *vcpu)
 }
 
 static int ar_translation(struct kvm_vcpu *vcpu, union asce *asce, ar_t ar,
-			  int write)
+			  enum gacc_mode mode)
 {
 	union alet alet;
 	struct ale ale;
@@ -438,7 +454,7 @@ static int ar_translation(struct kvm_vcpu *vcpu, union asce *asce, ar_t ar,
 		}
 	}
 
-	if (ale.fo == 1 && write)
+	if (ale.fo == 1 && mode == GACC_STORE)
 		return PGM_PROTECTION;
 
 	asce->val = aste.asce;
@@ -461,25 +477,28 @@ enum {
 };
 
 static int get_vcpu_asce(struct kvm_vcpu *vcpu, union asce *asce,
-			 ar_t ar, int write)
+			 ar_t ar, enum gacc_mode mode)
 {
 	int rc;
-	psw_t *psw = &vcpu->arch.sie_block->gpsw;
+	struct psw_bits psw = psw_bits(vcpu->arch.sie_block->gpsw);
 	struct kvm_s390_pgm_info *pgm = &vcpu->arch.pgm;
 	struct trans_exc_code_bits *tec_bits;
 
 	memset(pgm, 0, sizeof(*pgm));
 	tec_bits = (struct trans_exc_code_bits *)&pgm->trans_exc_code;
-	tec_bits->fsi = write ? FSI_STORE : FSI_FETCH;
-	tec_bits->as = psw_bits(*psw).as;
+	tec_bits->fsi = mode == GACC_STORE ? FSI_STORE : FSI_FETCH;
+	tec_bits->as = psw.as;
 
-	if (!psw_bits(*psw).t) {
+	if (!psw.t) {
 		asce->val = 0;
 		asce->r = 1;
 		return 0;
 	}
 
-	switch (psw_bits(vcpu->arch.sie_block->gpsw).as) {
+	if (mode == GACC_IFETCH)
+		psw.as = psw.as == PSW_AS_HOME ? PSW_AS_HOME : PSW_AS_PRIMARY;
+
+	switch (psw.as) {
 	case PSW_AS_PRIMARY:
 		asce->val = vcpu->arch.sie_block->gcr[1];
 		return 0;
@@ -490,7 +509,7 @@ static int get_vcpu_asce(struct kvm_vcpu *vcpu, union asce *asce,
 		asce->val = vcpu->arch.sie_block->gcr[13];
 		return 0;
 	case PSW_AS_ACCREG:
-		rc = ar_translation(vcpu, asce, ar, write);
+		rc = ar_translation(vcpu, asce, ar, mode);
 		switch (rc) {
 		case PGM_ALEN_TRANSLATION:
 		case PGM_ALE_SEQUENCE:
@@ -522,7 +541,7 @@ static int deref_table(struct kvm *kvm, unsigned long gpa, unsigned long *val)
  * @gva: guest virtual address
  * @gpa: points to where guest physical (absolute) address should be stored
  * @asce: effective asce
- * @write: indicates if access is a write access
+ * @mode: indicates the access mode to be used
  *
  * Translate a guest virtual address into a guest absolute address by means
  * of dynamic address translation as specified by the architecture.
@@ -538,7 +557,7 @@ static int deref_table(struct kvm *kvm, unsigned long gpa, unsigned long *val)
  */
 static unsigned long guest_translate(struct kvm_vcpu *vcpu, unsigned long gva,
 				     unsigned long *gpa, const union asce asce,
-				     int write)
+				     enum gacc_mode mode)
 {
 	union vaddress vaddr = {.addr = gva};
 	union raddress raddr = {.addr = gva};
@@ -683,7 +702,7 @@ static unsigned long guest_translate(struct kvm_vcpu *vcpu, unsigned long gva,
 real_address:
 	raddr.addr = kvm_s390_real_to_abs(vcpu, raddr.addr);
 absolute_address:
-	if (write && dat_protection)
+	if (mode == GACC_STORE && dat_protection)
 		return PGM_PROTECTION;
 	if (kvm_is_error_gpa(vcpu->kvm, raddr.addr))
 		return PGM_ADDRESSING;
@@ -712,7 +731,7 @@ static int low_address_protection_enabled(struct kvm_vcpu *vcpu,
 
 static int guest_page_range(struct kvm_vcpu *vcpu, unsigned long ga,
 			    unsigned long *pages, unsigned long nr_pages,
-			    const union asce asce, int write)
+			    const union asce asce, enum gacc_mode mode)
 {
 	struct kvm_s390_pgm_info *pgm = &vcpu->arch.pgm;
 	psw_t *psw = &vcpu->arch.sie_block->gpsw;
@@ -724,13 +743,13 @@ static int guest_page_range(struct kvm_vcpu *vcpu, unsigned long ga,
 	while (nr_pages) {
 		ga = kvm_s390_logical_to_effective(vcpu, ga);
 		tec_bits->addr = ga >> PAGE_SHIFT;
-		if (write && lap_enabled && is_low_address(ga)) {
+		if (mode == GACC_STORE && lap_enabled && is_low_address(ga)) {
 			pgm->code = PGM_PROTECTION;
 			return pgm->code;
 		}
 		ga &= PAGE_MASK;
 		if (psw_bits(*psw).t) {
-			rc = guest_translate(vcpu, ga, pages, asce, write);
+			rc = guest_translate(vcpu, ga, pages, asce, mode);
 			if (rc < 0)
 				return rc;
 			if (rc == PGM_PROTECTION)
@@ -752,7 +771,7 @@ static int guest_page_range(struct kvm_vcpu *vcpu, unsigned long ga,
 }
 
 int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, ar_t ar, void *data,
-		 unsigned long len, int write)
+		 unsigned long len, enum gacc_mode mode)
 {
 	psw_t *psw = &vcpu->arch.sie_block->gpsw;
 	unsigned long _len, nr_pages, gpa, idx;
@@ -764,7 +783,7 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, ar_t ar, void *data,
 
 	if (!len)
 		return 0;
-	rc = get_vcpu_asce(vcpu, &asce, ar, write);
+	rc = get_vcpu_asce(vcpu, &asce, ar, mode);
 	if (rc)
 		return rc;
 	nr_pages = (((ga & ~PAGE_MASK) + len - 1) >> PAGE_SHIFT) + 1;
@@ -776,11 +795,11 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, ar_t ar, void *data,
 	need_ipte_lock = psw_bits(*psw).t && !asce.r;
 	if (need_ipte_lock)
 		ipte_lock(vcpu);
-	rc = guest_page_range(vcpu, ga, pages, nr_pages, asce, write);
+	rc = guest_page_range(vcpu, ga, pages, nr_pages, asce, mode);
 	for (idx = 0; idx < nr_pages && !rc; idx++) {
 		gpa = *(pages + idx) + (ga & ~PAGE_MASK);
 		_len = min(PAGE_SIZE - (gpa & ~PAGE_MASK), len);
-		if (write)
+		if (mode == GACC_STORE)
 			rc = kvm_write_guest(vcpu->kvm, gpa, data, _len);
 		else
 			rc = kvm_read_guest(vcpu->kvm, gpa, data, _len);
@@ -796,7 +815,7 @@ int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, ar_t ar, void *data,
 }
 
 int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
-		      void *data, unsigned long len, int write)
+		      void *data, unsigned long len, enum gacc_mode mode)
 {
 	unsigned long _len, gpa;
 	int rc = 0;
@@ -804,7 +823,7 @@ int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
 	while (len && !rc) {
 		gpa = kvm_s390_real_to_abs(vcpu, gra);
 		_len = min(PAGE_SIZE - (gpa & ~PAGE_MASK), len);
-		if (write)
+		if (mode)
 			rc = write_guest_abs(vcpu, gpa, data, _len);
 		else
 			rc = read_guest_abs(vcpu, gpa, data, _len);
@@ -825,7 +844,7 @@ int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
  * has to take care of this.
  */
 int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, ar_t ar,
-			    unsigned long *gpa, int write)
+			    unsigned long *gpa, enum gacc_mode mode)
 {
 	struct kvm_s390_pgm_info *pgm = &vcpu->arch.pgm;
 	psw_t *psw = &vcpu->arch.sie_block->gpsw;
@@ -835,19 +854,19 @@ int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, ar_t ar,
 
 	gva = kvm_s390_logical_to_effective(vcpu, gva);
 	tec = (struct trans_exc_code_bits *)&pgm->trans_exc_code;
-	rc = get_vcpu_asce(vcpu, &asce, ar, write);
+	rc = get_vcpu_asce(vcpu, &asce, ar, mode);
 	tec->addr = gva >> PAGE_SHIFT;
 	if (rc)
 		return rc;
 	if (is_low_address(gva) && low_address_protection_enabled(vcpu, asce)) {
-		if (write) {
+		if (mode == GACC_STORE) {
 			rc = pgm->code = PGM_PROTECTION;
 			return rc;
 		}
 	}
 
 	if (psw_bits(*psw).t && !asce.r) {	/* Use DAT? */
-		rc = guest_translate(vcpu, gva, gpa, asce, write);
+		rc = guest_translate(vcpu, gva, gpa, asce, mode);
 		if (rc > 0) {
 			if (rc == PGM_PROTECTION)
 				tec->b61 = 1;
@@ -867,7 +886,7 @@ int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, ar_t ar,
  * check_gva_range - test a range of guest virtual addresses for accessibility
  */
 int check_gva_range(struct kvm_vcpu *vcpu, unsigned long gva, ar_t ar,
-		    unsigned long length, int is_write)
+		    unsigned long length, enum gacc_mode mode)
 {
 	unsigned long gpa;
 	unsigned long currlen;
@@ -876,7 +895,7 @@ int check_gva_range(struct kvm_vcpu *vcpu, unsigned long gva, ar_t ar,
 	ipte_lock(vcpu);
 	while (length > 0 && !rc) {
 		currlen = min(length, PAGE_SIZE - (gva % PAGE_SIZE));
-		rc = guest_translate_address(vcpu, gva, ar, &gpa, is_write);
+		rc = guest_translate_address(vcpu, gva, ar, &gpa, mode);
 		gva += currlen;
 		length -= currlen;
 	}
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index ef03726cc661..df0a79dd8159 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -155,16 +155,22 @@ int read_guest_lc(struct kvm_vcpu *vcpu, unsigned long gra, void *data,
 	return kvm_read_guest(vcpu->kvm, gpa, data, len);
 }
 
+enum gacc_mode {
+	GACC_FETCH,
+	GACC_STORE,
+	GACC_IFETCH,
+};
+
 int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva,
-			    ar_t ar, unsigned long *gpa, int write);
+			    ar_t ar, unsigned long *gpa, enum gacc_mode mode);
 int check_gva_range(struct kvm_vcpu *vcpu, unsigned long gva, ar_t ar,
-		    unsigned long length, int is_write);
+		    unsigned long length, enum gacc_mode mode);
 
 int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, ar_t ar, void *data,
-		 unsigned long len, int write);
+		 unsigned long len, enum gacc_mode mode);
 
 int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra,
-		      void *data, unsigned long len, int write);
+		      void *data, unsigned long len, enum gacc_mode mode);
 
 /**
  * write_guest - copy data from kernel space to guest space
@@ -215,7 +221,7 @@ static inline __must_check
 int write_guest(struct kvm_vcpu *vcpu, unsigned long ga, ar_t ar, void *data,
 		unsigned long len)
 {
-	return access_guest(vcpu, ga, ar, data, len, 1);
+	return access_guest(vcpu, ga, ar, data, len, GACC_STORE);
 }
 
 /**
@@ -235,7 +241,27 @@ static inline __must_check
 int read_guest(struct kvm_vcpu *vcpu, unsigned long ga, ar_t ar, void *data,
 	       unsigned long len)
 {
-	return access_guest(vcpu, ga, ar, data, len, 0);
+	return access_guest(vcpu, ga, ar, data, len, GACC_FETCH);
+}
+
+/**
+ * read_guest_instr - copy instruction data from guest space to kernel space
+ * @vcpu: virtual cpu
+ * @data: destination address in kernel space
+ * @len: number of bytes to copy
+ *
+ * Copy @len bytes from the current psw address (guest space) to @data (kernel
+ * space).
+ *
+ * The behaviour of read_guest_instr is identical to read_guest, except that
+ * instruction data will be read from primary space when in home-space or
+ * address-space mode.
+ */
+static inline __must_check
+int read_guest_instr(struct kvm_vcpu *vcpu, void *data, unsigned long len)
+{
+	return access_guest(vcpu, vcpu->arch.sie_block->gpsw.addr, 0, data, len,
+			    GACC_IFETCH);
 }
 
 /**
diff --git a/arch/s390/kvm/guestdbg.c b/arch/s390/kvm/guestdbg.c
index 47518a324d75..e8c6843b9600 100644
--- a/arch/s390/kvm/guestdbg.c
+++ b/arch/s390/kvm/guestdbg.c
@@ -17,7 +17,7 @@
 /*
  * Extends the address range given by *start and *stop to include the address
  * range starting with estart and the length len. Takes care of overflowing
- * intervals and tries to minimize the overall intervall size.
+ * intervals and tries to minimize the overall interval size.
  */
 static void extend_address_range(u64 *start, u64 *stop, u64 estart, int len)
 {
@@ -72,7 +72,7 @@ static void enable_all_hw_bp(struct kvm_vcpu *vcpu)
 		return;
 
 	/*
-	 * If the guest is not interrested in branching events, we can savely
+	 * If the guest is not interested in branching events, we can safely
 	 * limit them to the PER address range.
 	 */
 	if (!(*cr9 & PER_EVENT_BRANCH))
@@ -116,7 +116,7 @@ static void enable_all_hw_wp(struct kvm_vcpu *vcpu)
 	if (*cr9 & PER_EVENT_STORE && *cr9 & PER_CONTROL_ALTERATION) {
 		*cr9 &= ~PER_CONTROL_ALTERATION;
 		*cr10 = 0;
-		*cr11 = PSW_ADDR_INSN;
+		*cr11 = -1UL;
 	} else {
 		*cr9 &= ~PER_CONTROL_ALTERATION;
 		*cr9 |= PER_EVENT_STORE;
@@ -159,7 +159,7 @@ void kvm_s390_patch_guest_per_regs(struct kvm_vcpu *vcpu)
 		vcpu->arch.sie_block->gcr[0] &= ~0x800ul;
 		vcpu->arch.sie_block->gcr[9] |= PER_EVENT_IFETCH;
 		vcpu->arch.sie_block->gcr[10] = 0;
-		vcpu->arch.sie_block->gcr[11] = PSW_ADDR_INSN;
+		vcpu->arch.sie_block->gcr[11] = -1UL;
 	}
 
 	if (guestdbg_hw_bp_enabled(vcpu)) {
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index b4a5aa110cec..2e6b54e4d3f9 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -38,25 +38,37 @@ static const intercept_handler_t instruction_handlers[256] = {
 	[0xeb] = kvm_s390_handle_eb,
 };
 
-void kvm_s390_rewind_psw(struct kvm_vcpu *vcpu, int ilc)
+u8 kvm_s390_get_ilen(struct kvm_vcpu *vcpu)
 {
 	struct kvm_s390_sie_block *sie_block = vcpu->arch.sie_block;
+	u8 ilen = 0;
 
-	/* Use the length of the EXECUTE instruction if necessary */
-	if (sie_block->icptstatus & 1) {
-		ilc = (sie_block->icptstatus >> 4) & 0x6;
-		if (!ilc)
-			ilc = 4;
+	switch (vcpu->arch.sie_block->icptcode) {
+	case ICPT_INST:
+	case ICPT_INSTPROGI:
+	case ICPT_OPEREXC:
+	case ICPT_PARTEXEC:
+	case ICPT_IOINST:
+		/* instruction only stored for these icptcodes */
+		ilen = insn_length(vcpu->arch.sie_block->ipa >> 8);
+		/* Use the length of the EXECUTE instruction if necessary */
+		if (sie_block->icptstatus & 1) {
+			ilen = (sie_block->icptstatus >> 4) & 0x6;
+			if (!ilen)
+				ilen = 4;
+		}
+		break;
+	case ICPT_PROGI:
+		/* bit 1+2 of pgmilc are the ilc, so we directly get ilen */
+		ilen = vcpu->arch.sie_block->pgmilc & 0x6;
+		break;
 	}
-	sie_block->gpsw.addr = __rewind_psw(sie_block->gpsw, ilc);
+	return ilen;
 }
 
 static int handle_noop(struct kvm_vcpu *vcpu)
 {
 	switch (vcpu->arch.sie_block->icptcode) {
-	case 0x0:
-		vcpu->stat.exit_null++;
-		break;
 	case 0x10:
 		vcpu->stat.exit_external_request++;
 		break;
@@ -124,11 +136,13 @@ static int handle_instruction(struct kvm_vcpu *vcpu)
 	return -EOPNOTSUPP;
 }
 
-static void __extract_prog_irq(struct kvm_vcpu *vcpu,
-			       struct kvm_s390_pgm_info *pgm_info)
+static int inject_prog_on_prog_intercept(struct kvm_vcpu *vcpu)
 {
-	memset(pgm_info, 0, sizeof(struct kvm_s390_pgm_info));
-	pgm_info->code = vcpu->arch.sie_block->iprcc;
+	struct kvm_s390_pgm_info pgm_info = {
+		.code = vcpu->arch.sie_block->iprcc,
+		/* the PSW has already been rewound */
+		.flags = KVM_S390_PGM_FLAGS_NO_REWIND,
+	};
 
 	switch (vcpu->arch.sie_block->iprcc & ~PGM_PER) {
 	case PGM_AFX_TRANSLATION:
@@ -141,7 +155,7 @@ static void __extract_prog_irq(struct kvm_vcpu *vcpu,
 	case PGM_PRIMARY_AUTHORITY:
 	case PGM_SECONDARY_AUTHORITY:
 	case PGM_SPACE_SWITCH:
-		pgm_info->trans_exc_code = vcpu->arch.sie_block->tecmc;
+		pgm_info.trans_exc_code = vcpu->arch.sie_block->tecmc;
 		break;
 	case PGM_ALEN_TRANSLATION:
 	case PGM_ALE_SEQUENCE:
@@ -149,7 +163,7 @@ static void __extract_prog_irq(struct kvm_vcpu *vcpu,
 	case PGM_ASTE_SEQUENCE:
 	case PGM_ASTE_VALIDITY:
 	case PGM_EXTENDED_AUTHORITY:
-		pgm_info->exc_access_id = vcpu->arch.sie_block->eai;
+		pgm_info.exc_access_id = vcpu->arch.sie_block->eai;
 		break;
 	case PGM_ASCE_TYPE:
 	case PGM_PAGE_TRANSLATION:
@@ -157,32 +171,33 @@ static void __extract_prog_irq(struct kvm_vcpu *vcpu,
 	case PGM_REGION_SECOND_TRANS:
 	case PGM_REGION_THIRD_TRANS:
 	case PGM_SEGMENT_TRANSLATION:
-		pgm_info->trans_exc_code = vcpu->arch.sie_block->tecmc;
-		pgm_info->exc_access_id  = vcpu->arch.sie_block->eai;
-		pgm_info->op_access_id  = vcpu->arch.sie_block->oai;
+		pgm_info.trans_exc_code = vcpu->arch.sie_block->tecmc;
+		pgm_info.exc_access_id  = vcpu->arch.sie_block->eai;
+		pgm_info.op_access_id  = vcpu->arch.sie_block->oai;
 		break;
 	case PGM_MONITOR:
-		pgm_info->mon_class_nr = vcpu->arch.sie_block->mcn;
-		pgm_info->mon_code = vcpu->arch.sie_block->tecmc;
+		pgm_info.mon_class_nr = vcpu->arch.sie_block->mcn;
+		pgm_info.mon_code = vcpu->arch.sie_block->tecmc;
 		break;
 	case PGM_VECTOR_PROCESSING:
 	case PGM_DATA:
-		pgm_info->data_exc_code = vcpu->arch.sie_block->dxc;
+		pgm_info.data_exc_code = vcpu->arch.sie_block->dxc;
 		break;
 	case PGM_PROTECTION:
-		pgm_info->trans_exc_code = vcpu->arch.sie_block->tecmc;
-		pgm_info->exc_access_id  = vcpu->arch.sie_block->eai;
+		pgm_info.trans_exc_code = vcpu->arch.sie_block->tecmc;
+		pgm_info.exc_access_id  = vcpu->arch.sie_block->eai;
 		break;
 	default:
 		break;
 	}
 
 	if (vcpu->arch.sie_block->iprcc & PGM_PER) {
-		pgm_info->per_code = vcpu->arch.sie_block->perc;
-		pgm_info->per_atmid = vcpu->arch.sie_block->peratmid;
-		pgm_info->per_address = vcpu->arch.sie_block->peraddr;
-		pgm_info->per_access_id = vcpu->arch.sie_block->peraid;
+		pgm_info.per_code = vcpu->arch.sie_block->perc;
+		pgm_info.per_atmid = vcpu->arch.sie_block->peratmid;
+		pgm_info.per_address = vcpu->arch.sie_block->peraddr;
+		pgm_info.per_access_id = vcpu->arch.sie_block->peraid;
 	}
+	return kvm_s390_inject_prog_irq(vcpu, &pgm_info);
 }
 
 /*
@@ -211,7 +226,6 @@ static int handle_itdb(struct kvm_vcpu *vcpu)
 
 static int handle_prog(struct kvm_vcpu *vcpu)
 {
-	struct kvm_s390_pgm_info pgm_info;
 	psw_t psw;
 	int rc;
 
@@ -237,8 +251,7 @@ static int handle_prog(struct kvm_vcpu *vcpu)
 	if (rc)
 		return rc;
 
-	__extract_prog_irq(vcpu, &pgm_info);
-	return kvm_s390_inject_prog_irq(vcpu, &pgm_info);
+	return inject_prog_on_prog_intercept(vcpu);
 }
 
 /**
@@ -305,7 +318,7 @@ static int handle_mvpg_pei(struct kvm_vcpu *vcpu)
 
 	/* Make sure that the source is paged-in */
 	rc = guest_translate_address(vcpu, vcpu->run->s.regs.gprs[reg2],
-				     reg2, &srcaddr, 0);
+				     reg2, &srcaddr, GACC_FETCH);
 	if (rc)
 		return kvm_s390_inject_prog_cond(vcpu, rc);
 	rc = kvm_arch_fault_in_page(vcpu, srcaddr, 0);
@@ -314,14 +327,14 @@ static int handle_mvpg_pei(struct kvm_vcpu *vcpu)
 
 	/* Make sure that the destination is paged-in */
 	rc = guest_translate_address(vcpu, vcpu->run->s.regs.gprs[reg1],
-				     reg1, &dstaddr, 1);
+				     reg1, &dstaddr, GACC_STORE);
 	if (rc)
 		return kvm_s390_inject_prog_cond(vcpu, rc);
 	rc = kvm_arch_fault_in_page(vcpu, dstaddr, 1);
 	if (rc != 0)
 		return rc;
 
-	kvm_s390_rewind_psw(vcpu, 4);
+	kvm_s390_retry_instr(vcpu);
 
 	return 0;
 }
@@ -338,8 +351,10 @@ static int handle_partial_execution(struct kvm_vcpu *vcpu)
 
 int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu)
 {
+	if (kvm_is_ucontrol(vcpu->kvm))
+		return -EOPNOTSUPP;
+
 	switch (vcpu->arch.sie_block->icptcode) {
-	case 0x00:
 	case 0x10:
 	case 0x18:
 		return handle_noop(vcpu);
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 373e32346d68..84efc2ba6a90 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -23,6 +23,7 @@
 #include <asm/uaccess.h>
 #include <asm/sclp.h>
 #include <asm/isc.h>
+#include <asm/gmap.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 #include "trace-s390.h"
@@ -34,6 +35,106 @@
 #define PFAULT_DONE 0x0680
 #define VIRTIO_PARAM 0x0d00
 
+/* handle external calls via sigp interpretation facility */
+static int sca_ext_call_pending(struct kvm_vcpu *vcpu, int *src_id)
+{
+	int c, scn;
+
+	if (!(atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_ECALL_PEND))
+		return 0;
+
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	if (vcpu->kvm->arch.use_esca) {
+		struct esca_block *sca = vcpu->kvm->arch.sca;
+		union esca_sigp_ctrl sigp_ctrl =
+			sca->cpu[vcpu->vcpu_id].sigp_ctrl;
+
+		c = sigp_ctrl.c;
+		scn = sigp_ctrl.scn;
+	} else {
+		struct bsca_block *sca = vcpu->kvm->arch.sca;
+		union bsca_sigp_ctrl sigp_ctrl =
+			sca->cpu[vcpu->vcpu_id].sigp_ctrl;
+
+		c = sigp_ctrl.c;
+		scn = sigp_ctrl.scn;
+	}
+	read_unlock(&vcpu->kvm->arch.sca_lock);
+
+	if (src_id)
+		*src_id = scn;
+
+	return c;
+}
+
+static int sca_inject_ext_call(struct kvm_vcpu *vcpu, int src_id)
+{
+	int expect, rc;
+
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	if (vcpu->kvm->arch.use_esca) {
+		struct esca_block *sca = vcpu->kvm->arch.sca;
+		union esca_sigp_ctrl *sigp_ctrl =
+			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
+		union esca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+
+		new_val.scn = src_id;
+		new_val.c = 1;
+		old_val.c = 0;
+
+		expect = old_val.value;
+		rc = cmpxchg(&sigp_ctrl->value, old_val.value, new_val.value);
+	} else {
+		struct bsca_block *sca = vcpu->kvm->arch.sca;
+		union bsca_sigp_ctrl *sigp_ctrl =
+			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
+		union bsca_sigp_ctrl new_val = {0}, old_val = *sigp_ctrl;
+
+		new_val.scn = src_id;
+		new_val.c = 1;
+		old_val.c = 0;
+
+		expect = old_val.value;
+		rc = cmpxchg(&sigp_ctrl->value, old_val.value, new_val.value);
+	}
+	read_unlock(&vcpu->kvm->arch.sca_lock);
+
+	if (rc != expect) {
+		/* another external call is pending */
+		return -EBUSY;
+	}
+	atomic_or(CPUSTAT_ECALL_PEND, &vcpu->arch.sie_block->cpuflags);
+	return 0;
+}
+
+static void sca_clear_ext_call(struct kvm_vcpu *vcpu)
+{
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	int rc, expect;
+
+	atomic_andnot(CPUSTAT_ECALL_PEND, li->cpuflags);
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	if (vcpu->kvm->arch.use_esca) {
+		struct esca_block *sca = vcpu->kvm->arch.sca;
+		union esca_sigp_ctrl *sigp_ctrl =
+			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
+		union esca_sigp_ctrl old = *sigp_ctrl;
+
+		expect = old.value;
+		rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
+	} else {
+		struct bsca_block *sca = vcpu->kvm->arch.sca;
+		union bsca_sigp_ctrl *sigp_ctrl =
+			&(sca->cpu[vcpu->vcpu_id].sigp_ctrl);
+		union bsca_sigp_ctrl old = *sigp_ctrl;
+
+		expect = old.value;
+		rc = cmpxchg(&sigp_ctrl->value, old.value, 0);
+	}
+	read_unlock(&vcpu->kvm->arch.sca_lock);
+	WARN_ON(rc != expect); /* cannot clear? */
+}
+
 int psw_extint_disabled(struct kvm_vcpu *vcpu)
 {
 	return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_EXT);
@@ -82,8 +183,9 @@ static int cpu_timer_interrupts_enabled(struct kvm_vcpu *vcpu)
 
 static int cpu_timer_irq_pending(struct kvm_vcpu *vcpu)
 {
-	return (vcpu->arch.sie_block->cputm >> 63) &&
-	       cpu_timer_interrupts_enabled(vcpu);
+	if (!cpu_timer_interrupts_enabled(vcpu))
+		return 0;
+	return kvm_s390_get_cpu_timer(vcpu) >> 63;
 }
 
 static inline int is_ioirq(unsigned long irq_type)
@@ -235,23 +337,6 @@ static void set_intercept_indicators(struct kvm_vcpu *vcpu)
 	set_intercept_indicators_stop(vcpu);
 }
 
-static u16 get_ilc(struct kvm_vcpu *vcpu)
-{
-	switch (vcpu->arch.sie_block->icptcode) {
-	case ICPT_INST:
-	case ICPT_INSTPROGI:
-	case ICPT_OPEREXC:
-	case ICPT_PARTEXEC:
-	case ICPT_IOINST:
-		/* last instruction only stored for these icptcodes */
-		return insn_length(vcpu->arch.sie_block->ipa >> 8);
-	case ICPT_PROGI:
-		return vcpu->arch.sie_block->pgmilc;
-	default:
-		return 0;
-	}
-}
-
 static int __must_check __deliver_cpu_timer(struct kvm_vcpu *vcpu)
 {
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
@@ -399,9 +484,9 @@ static int __must_check __deliver_restart(struct kvm_vcpu *vcpu)
 	trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_RESTART, 0, 0);
 
 	rc  = write_guest_lc(vcpu,
-			     offsetof(struct _lowcore, restart_old_psw),
+			     offsetof(struct lowcore, restart_old_psw),
 			     &vcpu->arch.sie_block->gpsw, sizeof(psw_t));
-	rc |= read_guest_lc(vcpu, offsetof(struct _lowcore, restart_psw),
+	rc |= read_guest_lc(vcpu, offsetof(struct lowcore, restart_psw),
 			    &vcpu->arch.sie_block->gpsw, sizeof(psw_t));
 	clear_bit(IRQ_PEND_RESTART, &li->pending_irqs);
 	return rc ? -EFAULT : 0;
@@ -488,7 +573,7 @@ static int __must_check __deliver_prog(struct kvm_vcpu *vcpu)
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
 	struct kvm_s390_pgm_info pgm_info;
 	int rc = 0, nullifying = false;
-	u16 ilc = get_ilc(vcpu);
+	u16 ilen;
 
 	spin_lock(&li->lock);
 	pgm_info = li->irq.pgm;
@@ -496,8 +581,9 @@ static int __must_check __deliver_prog(struct kvm_vcpu *vcpu)
 	memset(&li->irq.pgm, 0, sizeof(pgm_info));
 	spin_unlock(&li->lock);
 
-	VCPU_EVENT(vcpu, 3, "deliver: program irq code 0x%x, ilc:%d",
-		   pgm_info.code, ilc);
+	ilen = pgm_info.flags & KVM_S390_PGM_FLAGS_ILC_MASK;
+	VCPU_EVENT(vcpu, 3, "deliver: program irq code 0x%x, ilen:%d",
+		   pgm_info.code, ilen);
 	vcpu->stat.deliver_program_int++;
 	trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, KVM_S390_PROGRAM_INT,
 					 pgm_info.code, 0);
@@ -581,10 +667,11 @@ static int __must_check __deliver_prog(struct kvm_vcpu *vcpu)
 				   (u8 *) __LC_PER_ACCESS_ID);
 	}
 
-	if (nullifying && vcpu->arch.sie_block->icptcode == ICPT_INST)
-		kvm_s390_rewind_psw(vcpu, ilc);
+	if (nullifying && !(pgm_info.flags & KVM_S390_PGM_FLAGS_NO_REWIND))
+		kvm_s390_rewind_psw(vcpu, ilen);
 
-	rc |= put_guest_lc(vcpu, ilc, (u16 *) __LC_PGM_ILC);
+	/* bit 1+2 of the target are the ilc, so we can directly use ilen */
+	rc |= put_guest_lc(vcpu, ilen, (u16 *) __LC_PGM_ILC);
 	rc |= put_guest_lc(vcpu, vcpu->arch.sie_block->gbea,
 				 (u64 *) __LC_LAST_BREAK);
 	rc |= put_guest_lc(vcpu, pgm_info.code,
@@ -792,13 +879,11 @@ static const deliver_irq_t deliver_irq_funcs[] = {
 int kvm_s390_ext_call_pending(struct kvm_vcpu *vcpu)
 {
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
-	uint8_t sigp_ctrl = vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sigp_ctrl;
 
 	if (!sclp.has_sigpif)
 		return test_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs);
 
-	return (sigp_ctrl & SIGP_CTRL_C) &&
-	       (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_ECALL_PEND);
+	return sca_ext_call_pending(vcpu, NULL);
 }
 
 int kvm_s390_vcpu_has_irq(struct kvm_vcpu *vcpu, int exclude_stop)
@@ -825,9 +910,35 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 	return ckc_irq_pending(vcpu) || cpu_timer_irq_pending(vcpu);
 }
 
+static u64 __calculate_sltime(struct kvm_vcpu *vcpu)
+{
+	u64 now, cputm, sltime = 0;
+
+	if (ckc_interrupts_enabled(vcpu)) {
+		now = kvm_s390_get_tod_clock_fast(vcpu->kvm);
+		sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
+		/* already expired or overflow? */
+		if (!sltime || vcpu->arch.sie_block->ckc <= now)
+			return 0;
+		if (cpu_timer_interrupts_enabled(vcpu)) {
+			cputm = kvm_s390_get_cpu_timer(vcpu);
+			/* already expired? */
+			if (cputm >> 63)
+				return 0;
+			return min(sltime, tod_to_ns(cputm));
+		}
+	} else if (cpu_timer_interrupts_enabled(vcpu)) {
+		sltime = kvm_s390_get_cpu_timer(vcpu);
+		/* already expired? */
+		if (sltime >> 63)
+			return 0;
+	}
+	return sltime;
+}
+
 int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
 {
-	u64 now, sltime;
+	u64 sltime;
 
 	vcpu->stat.exit_wait_state++;
 
@@ -840,22 +951,20 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
 		return -EOPNOTSUPP; /* disabled wait */
 	}
 
-	if (!ckc_interrupts_enabled(vcpu)) {
+	if (!ckc_interrupts_enabled(vcpu) &&
+	    !cpu_timer_interrupts_enabled(vcpu)) {
 		VCPU_EVENT(vcpu, 3, "%s", "enabled wait w/o timer");
 		__set_cpu_idle(vcpu);
 		goto no_timer;
 	}
 
-	now = kvm_s390_get_tod_clock_fast(vcpu->kvm);
-	sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
-
-	/* underflow */
-	if (vcpu->arch.sie_block->ckc < now)
+	sltime = __calculate_sltime(vcpu);
+	if (!sltime)
 		return 0;
 
 	__set_cpu_idle(vcpu);
 	hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL);
-	VCPU_EVENT(vcpu, 4, "enabled wait via clock comparator: %llu ns", sltime);
+	VCPU_EVENT(vcpu, 4, "enabled wait: %llu ns", sltime);
 no_timer:
 	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
 	kvm_vcpu_block(vcpu);
@@ -868,13 +977,13 @@ no_timer:
 
 void kvm_s390_vcpu_wakeup(struct kvm_vcpu *vcpu)
 {
-	if (waitqueue_active(&vcpu->wq)) {
+	if (swait_active(&vcpu->wq)) {
 		/*
 		 * The vcpu gave up the cpu voluntarily, mark it as a good
 		 * yield-candidate.
 		 */
 		vcpu->preempted = true;
-		wake_up_interruptible(&vcpu->wq);
+		swake_up(&vcpu->wq);
 		vcpu->stat.halt_wakeup++;
 	}
 }
@@ -882,18 +991,16 @@ void kvm_s390_vcpu_wakeup(struct kvm_vcpu *vcpu)
 enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer)
 {
 	struct kvm_vcpu *vcpu;
-	u64 now, sltime;
+	u64 sltime;
 
 	vcpu = container_of(timer, struct kvm_vcpu, arch.ckc_timer);
-	now = kvm_s390_get_tod_clock_fast(vcpu->kvm);
-	sltime = tod_to_ns(vcpu->arch.sie_block->ckc - now);
+	sltime = __calculate_sltime(vcpu);
 
 	/*
 	 * If the monotonic clock runs faster than the tod clock we might be
 	 * woken up too early and have to go back to sleep to avoid deadlocks.
 	 */
-	if (vcpu->arch.sie_block->ckc > now &&
-	    hrtimer_forward_now(timer, ns_to_ktime(sltime)))
+	if (sltime && hrtimer_forward_now(timer, ns_to_ktime(sltime)))
 		return HRTIMER_RESTART;
 	kvm_s390_vcpu_wakeup(vcpu);
 	return HRTIMER_NORESTART;
@@ -909,9 +1016,7 @@ void kvm_s390_clear_local_irqs(struct kvm_vcpu *vcpu)
 	memset(&li->irq, 0, sizeof(li->irq));
 	spin_unlock(&li->lock);
 
-	/* clear pending external calls set by sigp interpretation facility */
-	atomic_andnot(CPUSTAT_ECALL_PEND, li->cpuflags);
-	vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sigp_ctrl = 0;
+	sca_clear_ext_call(vcpu);
 }
 
 int __must_check kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
@@ -963,8 +1068,16 @@ static int __inject_prog(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
 	trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_PROGRAM_INT,
 				   irq->u.pgm.code, 0);
 
+	if (!(irq->u.pgm.flags & KVM_S390_PGM_FLAGS_ILC_VALID)) {
+		/* auto detection if no valid ILC was given */
+		irq->u.pgm.flags &= ~KVM_S390_PGM_FLAGS_ILC_MASK;
+		irq->u.pgm.flags |= kvm_s390_get_ilen(vcpu);
+		irq->u.pgm.flags |= KVM_S390_PGM_FLAGS_ILC_VALID;
+	}
+
 	if (irq->u.pgm.code == PGM_PER) {
 		li->irq.pgm.code |= PGM_PER;
+		li->irq.pgm.flags = irq->u.pgm.flags;
 		/* only modify PER related information */
 		li->irq.pgm.per_address = irq->u.pgm.per_address;
 		li->irq.pgm.per_code = irq->u.pgm.per_code;
@@ -973,6 +1086,7 @@ static int __inject_prog(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
 	} else if (!(irq->u.pgm.code & PGM_PER)) {
 		li->irq.pgm.code = (li->irq.pgm.code & PGM_PER) |
 				   irq->u.pgm.code;
+		li->irq.pgm.flags = irq->u.pgm.flags;
 		/* only modify non-PER information */
 		li->irq.pgm.trans_exc_code = irq->u.pgm.trans_exc_code;
 		li->irq.pgm.mon_code = irq->u.pgm.mon_code;
@@ -1003,21 +1117,6 @@ static int __inject_pfault_init(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
 	return 0;
 }
 
-static int __inject_extcall_sigpif(struct kvm_vcpu *vcpu, uint16_t src_id)
-{
-	unsigned char new_val, old_val;
-	uint8_t *sigp_ctrl = &vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sigp_ctrl;
-
-	new_val = SIGP_CTRL_C | (src_id & SIGP_CTRL_SCN_MASK);
-	old_val = *sigp_ctrl & ~SIGP_CTRL_C;
-	if (cmpxchg(sigp_ctrl, old_val, new_val) != old_val) {
-		/* another external call is pending */
-		return -EBUSY;
-	}
-	atomic_or(CPUSTAT_ECALL_PEND, &vcpu->arch.sie_block->cpuflags);
-	return 0;
-}
-
 static int __inject_extcall(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
 {
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
@@ -1030,12 +1129,11 @@ static int __inject_extcall(struct kvm_vcpu *vcpu, struct kvm_s390_irq *irq)
 				   src_id, 0);
 
 	/* sending vcpu invalid */
-	if (src_id >= KVM_MAX_VCPUS ||
-	    kvm_get_vcpu(vcpu->kvm, src_id) == NULL)
+	if (kvm_get_vcpu_by_id(vcpu->kvm, src_id) == NULL)
 		return -EINVAL;
 
 	if (sclp.has_sigpif)
-		return __inject_extcall_sigpif(vcpu, src_id);
+		return sca_inject_ext_call(vcpu, src_id);
 
 	if (test_and_set_bit(IRQ_PEND_EXT_EXTERNAL, &li->pending_irqs))
 		return -EBUSY;
@@ -1110,6 +1208,10 @@ static int __inject_sigp_emergency(struct kvm_vcpu *vcpu,
 	trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_INT_EMERGENCY,
 				   irq->u.emerg.code, 0);
 
+	/* sending vcpu invalid */
+	if (kvm_get_vcpu_by_id(vcpu->kvm, irq->u.emerg.code) == NULL)
+		return -EINVAL;
+
 	set_bit(irq->u.emerg.code, li->sigp_emerg_pending);
 	set_bit(IRQ_PEND_EXT_EMERGENCY, &li->pending_irqs);
 	atomic_or(CPUSTAT_EXT_INT, li->cpuflags);
@@ -2200,7 +2302,7 @@ static void store_local_irq(struct kvm_s390_local_interrupt *li,
 
 int kvm_s390_get_irq_state(struct kvm_vcpu *vcpu, __u8 __user *buf, int len)
 {
-	uint8_t sigp_ctrl = vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sigp_ctrl;
+	int scn;
 	unsigned long sigp_emerg_pending[BITS_TO_LONGS(KVM_MAX_VCPUS)];
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
 	unsigned long pending_irqs;
@@ -2240,14 +2342,12 @@ int kvm_s390_get_irq_state(struct kvm_vcpu *vcpu, __u8 __user *buf, int len)
 		}
 	}
 
-	if ((sigp_ctrl & SIGP_CTRL_C) &&
-	    (atomic_read(&vcpu->arch.sie_block->cpuflags) &
-	     CPUSTAT_ECALL_PEND)) {
+	if (sca_ext_call_pending(vcpu, &scn)) {
 		if (n + sizeof(irq) > len)
 			return -ENOBUFS;
 		memset(&irq, 0, sizeof(irq));
 		irq.type = KVM_S390_INT_EXTERNAL_CALL;
-		irq.u.extcall.code = sigp_ctrl & SIGP_CTRL_SCN_MASK;
+		irq.u.extcall.code = scn;
 		if (copy_to_user(&buf[n], &irq, sizeof(irq)))
 			return -EFAULT;
 		n += sizeof(irq);
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 8fe2f1c722dc..668c087513e5 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -30,6 +30,7 @@
 #include <asm/lowcore.h>
 #include <asm/etr.h>
 #include <asm/pgtable.h>
+#include <asm/gmap.h>
 #include <asm/nmi.h>
 #include <asm/switch_to.h>
 #include <asm/isc.h>
@@ -158,6 +159,8 @@ static int kvm_clock_sync(struct notifier_block *notifier, unsigned long val,
 		kvm->arch.epoch -= *delta;
 		kvm_for_each_vcpu(i, vcpu, kvm) {
 			vcpu->arch.sie_block->epoch -= *delta;
+			if (vcpu->arch.cputm_enabled)
+				vcpu->arch.cputm_start += *delta;
 		}
 	}
 	return NOTIFY_OK;
@@ -246,7 +249,8 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 		break;
 	case KVM_CAP_NR_VCPUS:
 	case KVM_CAP_MAX_VCPUS:
-		r = KVM_MAX_VCPUS;
+		r = sclp.has_esca ? KVM_S390_ESCA_CPU_SLOTS
+				  : KVM_S390_BSCA_CPU_SLOTS;
 		break;
 	case KVM_CAP_NR_MEMSLOTS:
 		r = KVM_USER_MEM_SLOTS;
@@ -257,6 +261,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_S390_VECTOR_REGISTERS:
 		r = MACHINE_HAS_VX;
 		break;
+	case KVM_CAP_S390_RI:
+		r = test_facility(64);
+		break;
 	default:
 		r = 0;
 	}
@@ -270,19 +277,22 @@ static void kvm_s390_sync_dirty_log(struct kvm *kvm,
 	unsigned long address;
 	struct gmap *gmap = kvm->arch.gmap;
 
-	down_read(&gmap->mm->mmap_sem);
 	/* Loop over all guest pages */
 	last_gfn = memslot->base_gfn + memslot->npages;
 	for (cur_gfn = memslot->base_gfn; cur_gfn <= last_gfn; cur_gfn++) {
 		address = gfn_to_hva_memslot(memslot, cur_gfn);
 
-		if (gmap_test_and_clear_dirty(address, gmap))
+		if (test_and_clear_guest_dirty(gmap->mm, address))
 			mark_page_dirty(kvm, cur_gfn);
+		if (fatal_signal_pending(current))
+			return;
+		cond_resched();
 	}
-	up_read(&gmap->mm->mmap_sem);
 }
 
 /* Section: vm related */
+static void sca_del_vcpu(struct kvm_vcpu *vcpu);
+
 /*
  * Get (and clear) the dirty memory log for a memory slot.
  */
@@ -342,15 +352,33 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
 		r = 0;
 		break;
 	case KVM_CAP_S390_VECTOR_REGISTERS:
-		if (MACHINE_HAS_VX) {
-			set_kvm_facility(kvm->arch.model.fac->mask, 129);
-			set_kvm_facility(kvm->arch.model.fac->list, 129);
+		mutex_lock(&kvm->lock);
+		if (atomic_read(&kvm->online_vcpus)) {
+			r = -EBUSY;
+		} else if (MACHINE_HAS_VX) {
+			set_kvm_facility(kvm->arch.model.fac_mask, 129);
+			set_kvm_facility(kvm->arch.model.fac_list, 129);
 			r = 0;
 		} else
 			r = -EINVAL;
+		mutex_unlock(&kvm->lock);
 		VM_EVENT(kvm, 3, "ENABLE: CAP_S390_VECTOR_REGISTERS %s",
 			 r ? "(not available)" : "(success)");
 		break;
+	case KVM_CAP_S390_RI:
+		r = -EINVAL;
+		mutex_lock(&kvm->lock);
+		if (atomic_read(&kvm->online_vcpus)) {
+			r = -EBUSY;
+		} else if (test_facility(64)) {
+			set_kvm_facility(kvm->arch.model.fac_mask, 64);
+			set_kvm_facility(kvm->arch.model.fac_list, 64);
+			r = 0;
+		}
+		mutex_unlock(&kvm->lock);
+		VM_EVENT(kvm, 3, "ENABLE: CAP_S390_RI %s",
+			 r ? "(not available)" : "(success)");
+		break;
 	case KVM_CAP_S390_USER_STSI:
 		VM_EVENT(kvm, 3, "%s", "ENABLE: CAP_S390_USER_STSI");
 		kvm->arch.user_stsi = 1;
@@ -371,8 +399,8 @@ static int kvm_s390_get_mem_control(struct kvm *kvm, struct kvm_device_attr *att
 	case KVM_S390_VM_MEM_LIMIT_SIZE:
 		ret = 0;
 		VM_EVENT(kvm, 3, "QUERY: max guest memory: %lu bytes",
-			 kvm->arch.gmap->asce_end);
-		if (put_user(kvm->arch.gmap->asce_end, (u64 __user *)attr->addr))
+			 kvm->arch.mem_limit);
+		if (put_user(kvm->arch.mem_limit, (u64 __user *)attr->addr))
 			ret = -EFAULT;
 		break;
 	default:
@@ -424,9 +452,17 @@ static int kvm_s390_set_mem_control(struct kvm *kvm, struct kvm_device_attr *att
 		if (get_user(new_limit, (u64 __user *)attr->addr))
 			return -EFAULT;
 
-		if (new_limit > kvm->arch.gmap->asce_end)
+		if (kvm->arch.mem_limit != KVM_S390_NO_MEM_LIMIT &&
+		    new_limit > kvm->arch.mem_limit)
 			return -E2BIG;
 
+		if (!new_limit)
+			return -EINVAL;
+
+		/* gmap_alloc takes last usable address */
+		if (new_limit != KVM_S390_NO_MEM_LIMIT)
+			new_limit -= 1;
+
 		ret = -EBUSY;
 		mutex_lock(&kvm->lock);
 		if (atomic_read(&kvm->online_vcpus) == 0) {
@@ -443,7 +479,9 @@ static int kvm_s390_set_mem_control(struct kvm *kvm, struct kvm_device_attr *att
 			}
 		}
 		mutex_unlock(&kvm->lock);
-		VM_EVENT(kvm, 3, "SET: max guest memory: %lu bytes", new_limit);
+		VM_EVENT(kvm, 3, "SET: max guest address: %lu", new_limit);
+		VM_EVENT(kvm, 3, "New guest asce: 0x%pK",
+			 (void *) kvm->arch.gmap->asce);
 		break;
 	}
 	default:
@@ -617,7 +655,7 @@ static int kvm_s390_set_processor(struct kvm *kvm, struct kvm_device_attr *attr)
 		memcpy(&kvm->arch.model.cpu_id, &proc->cpuid,
 		       sizeof(struct cpuid));
 		kvm->arch.model.ibc = proc->ibc;
-		memcpy(kvm->arch.model.fac->list, proc->fac_list,
+		memcpy(kvm->arch.model.fac_list, proc->fac_list,
 		       S390_ARCH_FAC_LIST_SIZE_BYTE);
 	} else
 		ret = -EFAULT;
@@ -651,7 +689,8 @@ static int kvm_s390_get_processor(struct kvm *kvm, struct kvm_device_attr *attr)
 	}
 	memcpy(&proc->cpuid, &kvm->arch.model.cpu_id, sizeof(struct cpuid));
 	proc->ibc = kvm->arch.model.ibc;
-	memcpy(&proc->fac_list, kvm->arch.model.fac->list, S390_ARCH_FAC_LIST_SIZE_BYTE);
+	memcpy(&proc->fac_list, kvm->arch.model.fac_list,
+	       S390_ARCH_FAC_LIST_SIZE_BYTE);
 	if (copy_to_user((void __user *)attr->addr, proc, sizeof(*proc)))
 		ret = -EFAULT;
 	kfree(proc);
@@ -671,7 +710,7 @@ static int kvm_s390_get_machine(struct kvm *kvm, struct kvm_device_attr *attr)
 	}
 	get_cpu_id((struct cpuid *) &mach->cpuid);
 	mach->ibc = sclp.ibc;
-	memcpy(&mach->fac_mask, kvm->arch.model.fac->mask,
+	memcpy(&mach->fac_mask, kvm->arch.model.fac_mask,
 	       S390_ARCH_FAC_LIST_SIZE_BYTE);
 	memcpy((unsigned long *)&mach->fac_list, S390_lowcore.stfle_fac_list,
 	       S390_ARCH_FAC_LIST_SIZE_BYTE);
@@ -1020,7 +1059,7 @@ static int kvm_s390_apxa_installed(void)
 	u8 config[128];
 	int cc;
 
-	if (test_facility(2) && test_facility(12)) {
+	if (test_facility(12)) {
 		cc = kvm_s390_query_ap_config(config);
 
 		if (cc)
@@ -1048,16 +1087,12 @@ static void kvm_s390_get_cpu_id(struct cpuid *cpu_id)
 	cpu_id->version = 0xff;
 }
 
-static int kvm_s390_crypto_init(struct kvm *kvm)
+static void kvm_s390_crypto_init(struct kvm *kvm)
 {
 	if (!test_kvm_facility(kvm, 76))
-		return 0;
-
-	kvm->arch.crypto.crycb = kzalloc(sizeof(*kvm->arch.crypto.crycb),
-					 GFP_KERNEL | GFP_DMA);
-	if (!kvm->arch.crypto.crycb)
-		return -ENOMEM;
+		return;
 
+	kvm->arch.crypto.crycb = &kvm->arch.sie_page2->crycb;
 	kvm_s390_set_crycb_format(kvm);
 
 	/* Enable AES/DEA protected key functions by default */
@@ -1067,8 +1102,15 @@ static int kvm_s390_crypto_init(struct kvm *kvm)
 			 sizeof(kvm->arch.crypto.crycb->aes_wrapping_key_mask));
 	get_random_bytes(kvm->arch.crypto.crycb->dea_wrapping_key_mask,
 			 sizeof(kvm->arch.crypto.crycb->dea_wrapping_key_mask));
+}
 
-	return 0;
+static void sca_dispose(struct kvm *kvm)
+{
+	if (kvm->arch.use_esca)
+		free_pages_exact(kvm->arch.sca, sizeof(struct esca_block));
+	else
+		free_page((unsigned long)(kvm->arch.sca));
+	kvm->arch.sca = NULL;
 }
 
 int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
@@ -1094,14 +1136,17 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 
 	rc = -ENOMEM;
 
-	kvm->arch.sca = (struct sca_block *) get_zeroed_page(GFP_KERNEL);
+	kvm->arch.use_esca = 0; /* start with basic SCA */
+	rwlock_init(&kvm->arch.sca_lock);
+	kvm->arch.sca = (struct bsca_block *) get_zeroed_page(GFP_KERNEL);
 	if (!kvm->arch.sca)
 		goto out_err;
 	spin_lock(&kvm_lock);
 	sca_offset += 16;
-	if (sca_offset + sizeof(struct sca_block) > PAGE_SIZE)
+	if (sca_offset + sizeof(struct bsca_block) > PAGE_SIZE)
 		sca_offset = 0;
-	kvm->arch.sca = (struct sca_block *) ((char *) kvm->arch.sca + sca_offset);
+	kvm->arch.sca = (struct bsca_block *)
+			((char *) kvm->arch.sca + sca_offset);
 	spin_unlock(&kvm_lock);
 
 	sprintf(debug_name, "kvm-%u", current->pid);
@@ -1110,37 +1155,30 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	if (!kvm->arch.dbf)
 		goto out_err;
 
-	/*
-	 * The architectural maximum amount of facilities is 16 kbit. To store
-	 * this amount, 2 kbyte of memory is required. Thus we need a full
-	 * page to hold the guest facility list (arch.model.fac->list) and the
-	 * facility mask (arch.model.fac->mask). Its address size has to be
-	 * 31 bits and word aligned.
-	 */
-	kvm->arch.model.fac =
-		(struct kvm_s390_fac *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
-	if (!kvm->arch.model.fac)
+	kvm->arch.sie_page2 =
+	     (struct sie_page2 *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	if (!kvm->arch.sie_page2)
 		goto out_err;
 
 	/* Populate the facility mask initially. */
-	memcpy(kvm->arch.model.fac->mask, S390_lowcore.stfle_fac_list,
+	memcpy(kvm->arch.model.fac_mask, S390_lowcore.stfle_fac_list,
 	       S390_ARCH_FAC_LIST_SIZE_BYTE);
 	for (i = 0; i < S390_ARCH_FAC_LIST_SIZE_U64; i++) {
 		if (i < kvm_s390_fac_list_mask_size())
-			kvm->arch.model.fac->mask[i] &= kvm_s390_fac_list_mask[i];
+			kvm->arch.model.fac_mask[i] &= kvm_s390_fac_list_mask[i];
 		else
-			kvm->arch.model.fac->mask[i] = 0UL;
+			kvm->arch.model.fac_mask[i] = 0UL;
 	}
 
 	/* Populate the facility list initially. */
-	memcpy(kvm->arch.model.fac->list, kvm->arch.model.fac->mask,
+	kvm->arch.model.fac_list = kvm->arch.sie_page2->fac_list;
+	memcpy(kvm->arch.model.fac_list, kvm->arch.model.fac_mask,
 	       S390_ARCH_FAC_LIST_SIZE_BYTE);
 
 	kvm_s390_get_cpu_id(&kvm->arch.model.cpu_id);
 	kvm->arch.model.ibc = sclp.ibc & 0x0fff;
 
-	if (kvm_s390_crypto_init(kvm) < 0)
-		goto out_err;
+	kvm_s390_crypto_init(kvm);
 
 	spin_lock_init(&kvm->arch.float_int.lock);
 	for (i = 0; i < FIRQ_LIST_COUNT; i++)
@@ -1153,8 +1191,14 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 
 	if (type & KVM_VM_S390_UCONTROL) {
 		kvm->arch.gmap = NULL;
+		kvm->arch.mem_limit = KVM_S390_NO_MEM_LIMIT;
 	} else {
-		kvm->arch.gmap = gmap_alloc(current->mm, (1UL << 44) - 1);
+		if (sclp.hamax == U64_MAX)
+			kvm->arch.mem_limit = TASK_MAX_SIZE;
+		else
+			kvm->arch.mem_limit = min_t(unsigned long, TASK_MAX_SIZE,
+						    sclp.hamax + 1);
+		kvm->arch.gmap = gmap_alloc(current->mm, kvm->arch.mem_limit - 1);
 		if (!kvm->arch.gmap)
 			goto out_err;
 		kvm->arch.gmap->private = kvm;
@@ -1166,14 +1210,13 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	kvm->arch.epoch = 0;
 
 	spin_lock_init(&kvm->arch.start_stop_lock);
-	KVM_EVENT(3, "vm 0x%p created by pid %u", kvm, current->pid);
+	KVM_EVENT(3, "vm 0x%pK created by pid %u", kvm, current->pid);
 
 	return 0;
 out_err:
-	kfree(kvm->arch.crypto.crycb);
-	free_page((unsigned long)kvm->arch.model.fac);
+	free_page((unsigned long)kvm->arch.sie_page2);
 	debug_unregister(kvm->arch.dbf);
-	free_page((unsigned long)(kvm->arch.sca));
+	sca_dispose(kvm);
 	KVM_EVENT(3, "creation of vm failed: %d", rc);
 	return rc;
 }
@@ -1184,14 +1227,8 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 	trace_kvm_s390_destroy_vcpu(vcpu->vcpu_id);
 	kvm_s390_clear_local_irqs(vcpu);
 	kvm_clear_async_pf_completion_queue(vcpu);
-	if (!kvm_is_ucontrol(vcpu->kvm)) {
-		clear_bit(63 - vcpu->vcpu_id,
-			  (unsigned long *) &vcpu->kvm->arch.sca->mcn);
-		if (vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda ==
-		    (__u64) vcpu->arch.sie_block)
-			vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].sda = 0;
-	}
-	smp_mb();
+	if (!kvm_is_ucontrol(vcpu->kvm))
+		sca_del_vcpu(vcpu);
 
 	if (kvm_is_ucontrol(vcpu->kvm))
 		gmap_free(vcpu->arch.gmap);
@@ -1223,15 +1260,14 @@ static void kvm_free_vcpus(struct kvm *kvm)
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	kvm_free_vcpus(kvm);
-	free_page((unsigned long)kvm->arch.model.fac);
-	free_page((unsigned long)(kvm->arch.sca));
+	sca_dispose(kvm);
 	debug_unregister(kvm->arch.dbf);
-	kfree(kvm->arch.crypto.crycb);
+	free_page((unsigned long)kvm->arch.sie_page2);
 	if (!kvm_is_ucontrol(kvm))
 		gmap_free(kvm->arch.gmap);
 	kvm_s390_destroy_adapters(kvm);
 	kvm_s390_clear_float_irqs(kvm);
-	KVM_EVENT(3, "vm 0x%p destroyed", kvm);
+	KVM_EVENT(3, "vm 0x%pK destroyed", kvm);
 }
 
 /* Section: vcpu related */
@@ -1245,6 +1281,117 @@ static int __kvm_ucontrol_vcpu_init(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+static void sca_del_vcpu(struct kvm_vcpu *vcpu)
+{
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	if (vcpu->kvm->arch.use_esca) {
+		struct esca_block *sca = vcpu->kvm->arch.sca;
+
+		clear_bit_inv(vcpu->vcpu_id, (unsigned long *) sca->mcn);
+		sca->cpu[vcpu->vcpu_id].sda = 0;
+	} else {
+		struct bsca_block *sca = vcpu->kvm->arch.sca;
+
+		clear_bit_inv(vcpu->vcpu_id, (unsigned long *) &sca->mcn);
+		sca->cpu[vcpu->vcpu_id].sda = 0;
+	}
+	read_unlock(&vcpu->kvm->arch.sca_lock);
+}
+
+static void sca_add_vcpu(struct kvm_vcpu *vcpu)
+{
+	read_lock(&vcpu->kvm->arch.sca_lock);
+	if (vcpu->kvm->arch.use_esca) {
+		struct esca_block *sca = vcpu->kvm->arch.sca;
+
+		sca->cpu[vcpu->vcpu_id].sda = (__u64) vcpu->arch.sie_block;
+		vcpu->arch.sie_block->scaoh = (__u32)(((__u64)sca) >> 32);
+		vcpu->arch.sie_block->scaol = (__u32)(__u64)sca & ~0x3fU;
+		vcpu->arch.sie_block->ecb2 |= 0x04U;
+		set_bit_inv(vcpu->vcpu_id, (unsigned long *) sca->mcn);
+	} else {
+		struct bsca_block *sca = vcpu->kvm->arch.sca;
+
+		sca->cpu[vcpu->vcpu_id].sda = (__u64) vcpu->arch.sie_block;
+		vcpu->arch.sie_block->scaoh = (__u32)(((__u64)sca) >> 32);
+		vcpu->arch.sie_block->scaol = (__u32)(__u64)sca;
+		set_bit_inv(vcpu->vcpu_id, (unsigned long *) &sca->mcn);
+	}
+	read_unlock(&vcpu->kvm->arch.sca_lock);
+}
+
+/* Basic SCA to Extended SCA data copy routines */
+static inline void sca_copy_entry(struct esca_entry *d, struct bsca_entry *s)
+{
+	d->sda = s->sda;
+	d->sigp_ctrl.c = s->sigp_ctrl.c;
+	d->sigp_ctrl.scn = s->sigp_ctrl.scn;
+}
+
+static void sca_copy_b_to_e(struct esca_block *d, struct bsca_block *s)
+{
+	int i;
+
+	d->ipte_control = s->ipte_control;
+	d->mcn[0] = s->mcn;
+	for (i = 0; i < KVM_S390_BSCA_CPU_SLOTS; i++)
+		sca_copy_entry(&d->cpu[i], &s->cpu[i]);
+}
+
+static int sca_switch_to_extended(struct kvm *kvm)
+{
+	struct bsca_block *old_sca = kvm->arch.sca;
+	struct esca_block *new_sca;
+	struct kvm_vcpu *vcpu;
+	unsigned int vcpu_idx;
+	u32 scaol, scaoh;
+
+	new_sca = alloc_pages_exact(sizeof(*new_sca), GFP_KERNEL|__GFP_ZERO);
+	if (!new_sca)
+		return -ENOMEM;
+
+	scaoh = (u32)((u64)(new_sca) >> 32);
+	scaol = (u32)(u64)(new_sca) & ~0x3fU;
+
+	kvm_s390_vcpu_block_all(kvm);
+	write_lock(&kvm->arch.sca_lock);
+
+	sca_copy_b_to_e(new_sca, old_sca);
+
+	kvm_for_each_vcpu(vcpu_idx, vcpu, kvm) {
+		vcpu->arch.sie_block->scaoh = scaoh;
+		vcpu->arch.sie_block->scaol = scaol;
+		vcpu->arch.sie_block->ecb2 |= 0x04U;
+	}
+	kvm->arch.sca = new_sca;
+	kvm->arch.use_esca = 1;
+
+	write_unlock(&kvm->arch.sca_lock);
+	kvm_s390_vcpu_unblock_all(kvm);
+
+	free_page((unsigned long)old_sca);
+
+	VM_EVENT(kvm, 2, "Switched to ESCA (0x%pK -> 0x%pK)",
+		 old_sca, kvm->arch.sca);
+	return 0;
+}
+
+static int sca_can_add_vcpu(struct kvm *kvm, unsigned int id)
+{
+	int rc;
+
+	if (id < KVM_S390_BSCA_CPU_SLOTS)
+		return true;
+	if (!sclp.has_esca)
+		return false;
+
+	mutex_lock(&kvm->lock);
+	rc = kvm->arch.use_esca ? 0 : sca_switch_to_extended(kvm);
+	mutex_unlock(&kvm->lock);
+
+	return rc == 0 && id < KVM_S390_ESCA_CPU_SLOTS;
+}
+
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
@@ -1255,8 +1402,15 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 				    KVM_SYNC_CRS |
 				    KVM_SYNC_ARCH0 |
 				    KVM_SYNC_PFAULT;
-	if (test_kvm_facility(vcpu->kvm, 129))
+	if (test_kvm_facility(vcpu->kvm, 64))
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_RICCB;
+	/* fprs can be synchronized via vrs, even if the guest has no vx. With
+	 * MACHINE_HAS_VX, (load|store)_fpu_regs() will work with vrs format.
+	 */
+	if (MACHINE_HAS_VX)
 		vcpu->run->kvm_valid_regs |= KVM_SYNC_VRS;
+	else
+		vcpu->run->kvm_valid_regs |= KVM_SYNC_FPRS;
 
 	if (kvm_is_ucontrol(vcpu->kvm))
 		return __kvm_ucontrol_vcpu_init(vcpu);
@@ -1264,44 +1418,105 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
-/*
- * Backs up the current FP/VX register save area on a particular
- * destination.  Used to switch between different register save
- * areas.
- */
-static inline void save_fpu_to(struct fpu *dst)
+/* needs disabled preemption to protect from TOD sync and vcpu_load/put */
+static void __start_cpu_timer_accounting(struct kvm_vcpu *vcpu)
 {
-	dst->fpc = current->thread.fpu.fpc;
-	dst->regs = current->thread.fpu.regs;
+	WARN_ON_ONCE(vcpu->arch.cputm_start != 0);
+	raw_write_seqcount_begin(&vcpu->arch.cputm_seqcount);
+	vcpu->arch.cputm_start = get_tod_clock_fast();
+	raw_write_seqcount_end(&vcpu->arch.cputm_seqcount);
 }
 
-/*
- * Switches the FP/VX register save area from which to lazy
- * restore register contents.
- */
-static inline void load_fpu_from(struct fpu *from)
+/* needs disabled preemption to protect from TOD sync and vcpu_load/put */
+static void __stop_cpu_timer_accounting(struct kvm_vcpu *vcpu)
 {
-	current->thread.fpu.fpc = from->fpc;
-	current->thread.fpu.regs = from->regs;
+	WARN_ON_ONCE(vcpu->arch.cputm_start == 0);
+	raw_write_seqcount_begin(&vcpu->arch.cputm_seqcount);
+	vcpu->arch.sie_block->cputm -= get_tod_clock_fast() - vcpu->arch.cputm_start;
+	vcpu->arch.cputm_start = 0;
+	raw_write_seqcount_end(&vcpu->arch.cputm_seqcount);
 }
 
-void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+/* needs disabled preemption to protect from TOD sync and vcpu_load/put */
+static void __enable_cpu_timer_accounting(struct kvm_vcpu *vcpu)
 {
-	/* Save host register state */
-	save_fpu_regs();
-	save_fpu_to(&vcpu->arch.host_fpregs);
+	WARN_ON_ONCE(vcpu->arch.cputm_enabled);
+	vcpu->arch.cputm_enabled = true;
+	__start_cpu_timer_accounting(vcpu);
+}
 
-	if (test_kvm_facility(vcpu->kvm, 129)) {
-		current->thread.fpu.fpc = vcpu->run->s.regs.fpc;
+/* needs disabled preemption to protect from TOD sync and vcpu_load/put */
+static void __disable_cpu_timer_accounting(struct kvm_vcpu *vcpu)
+{
+	WARN_ON_ONCE(!vcpu->arch.cputm_enabled);
+	__stop_cpu_timer_accounting(vcpu);
+	vcpu->arch.cputm_enabled = false;
+}
+
+static void enable_cpu_timer_accounting(struct kvm_vcpu *vcpu)
+{
+	preempt_disable(); /* protect from TOD sync and vcpu_load/put */
+	__enable_cpu_timer_accounting(vcpu);
+	preempt_enable();
+}
+
+static void disable_cpu_timer_accounting(struct kvm_vcpu *vcpu)
+{
+	preempt_disable(); /* protect from TOD sync and vcpu_load/put */
+	__disable_cpu_timer_accounting(vcpu);
+	preempt_enable();
+}
+
+/* set the cpu timer - may only be called from the VCPU thread itself */
+void kvm_s390_set_cpu_timer(struct kvm_vcpu *vcpu, __u64 cputm)
+{
+	preempt_disable(); /* protect from TOD sync and vcpu_load/put */
+	raw_write_seqcount_begin(&vcpu->arch.cputm_seqcount);
+	if (vcpu->arch.cputm_enabled)
+		vcpu->arch.cputm_start = get_tod_clock_fast();
+	vcpu->arch.sie_block->cputm = cputm;
+	raw_write_seqcount_end(&vcpu->arch.cputm_seqcount);
+	preempt_enable();
+}
+
+/* update and get the cpu timer - can also be called from other VCPU threads */
+__u64 kvm_s390_get_cpu_timer(struct kvm_vcpu *vcpu)
+{
+	unsigned int seq;
+	__u64 value;
+
+	if (unlikely(!vcpu->arch.cputm_enabled))
+		return vcpu->arch.sie_block->cputm;
+
+	preempt_disable(); /* protect from TOD sync and vcpu_load/put */
+	do {
+		seq = raw_read_seqcount(&vcpu->arch.cputm_seqcount);
 		/*
-		 * Use the register save area in the SIE-control block
-		 * for register restore and save in kvm_arch_vcpu_put()
+		 * If the writer would ever execute a read in the critical
+		 * section, e.g. in irq context, we have a deadlock.
 		 */
-		current->thread.fpu.vxrs =
-			(__vector128 *)&vcpu->run->s.regs.vrs;
-	} else
-		load_fpu_from(&vcpu->arch.guest_fpregs);
+		WARN_ON_ONCE((seq & 1) && smp_processor_id() == vcpu->cpu);
+		value = vcpu->arch.sie_block->cputm;
+		/* if cputm_start is 0, accounting is being started/stopped */
+		if (likely(vcpu->arch.cputm_start))
+			value -= get_tod_clock_fast() - vcpu->arch.cputm_start;
+	} while (read_seqcount_retry(&vcpu->arch.cputm_seqcount, seq & ~1));
+	preempt_enable();
+	return value;
+}
+
+void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+	/* Save host register state */
+	save_fpu_regs();
+	vcpu->arch.host_fpregs.fpc = current->thread.fpu.fpc;
+	vcpu->arch.host_fpregs.regs = current->thread.fpu.regs;
 
+	if (MACHINE_HAS_VX)
+		current->thread.fpu.regs = vcpu->run->s.regs.vrs;
+	else
+		current->thread.fpu.regs = vcpu->run->s.regs.fprs;
+	current->thread.fpu.fpc = vcpu->run->s.regs.fpc;
 	if (test_fp_ctl(current->thread.fpu.fpc))
 		/* User space provided an invalid FPC, let's clear it */
 		current->thread.fpu.fpc = 0;
@@ -1310,26 +1525,26 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	restore_access_regs(vcpu->run->s.regs.acrs);
 	gmap_enable(vcpu->arch.gmap);
 	atomic_or(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
+	if (vcpu->arch.cputm_enabled && !is_vcpu_idle(vcpu))
+		__start_cpu_timer_accounting(vcpu);
+	vcpu->cpu = cpu;
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	vcpu->cpu = -1;
+	if (vcpu->arch.cputm_enabled && !is_vcpu_idle(vcpu))
+		__stop_cpu_timer_accounting(vcpu);
 	atomic_andnot(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
 	gmap_disable(vcpu->arch.gmap);
 
+	/* Save guest register state */
 	save_fpu_regs();
+	vcpu->run->s.regs.fpc = current->thread.fpu.fpc;
 
-	if (test_kvm_facility(vcpu->kvm, 129))
-		/*
-		 * kvm_arch_vcpu_load() set up the register save area to
-		 * the &vcpu->run->s.regs.vrs and, thus, the vector registers
-		 * are already saved.  Only the floating-point control must be
-		 * copied.
-		 */
-		vcpu->run->s.regs.fpc = current->thread.fpu.fpc;
-	else
-		save_fpu_to(&vcpu->arch.guest_fpregs);
-	load_fpu_from(&vcpu->arch.host_fpregs);
+	/* Restore host register state */
+	current->thread.fpu.fpc = vcpu->arch.host_fpregs.fpc;
+	current->thread.fpu.regs = vcpu->arch.host_fpregs.regs;
 
 	save_access_regs(vcpu->run->s.regs.acrs);
 	restore_access_regs(vcpu->arch.host_acrs);
@@ -1341,14 +1556,15 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gpsw.mask = 0UL;
 	vcpu->arch.sie_block->gpsw.addr = 0UL;
 	kvm_s390_set_prefix(vcpu, 0);
-	vcpu->arch.sie_block->cputm     = 0UL;
+	kvm_s390_set_cpu_timer(vcpu, 0);
 	vcpu->arch.sie_block->ckc       = 0UL;
 	vcpu->arch.sie_block->todpr     = 0;
 	memset(vcpu->arch.sie_block->gcr, 0, 16 * sizeof(__u64));
 	vcpu->arch.sie_block->gcr[0]  = 0xE0UL;
 	vcpu->arch.sie_block->gcr[14] = 0xC2000000UL;
-	vcpu->arch.guest_fpregs.fpc = 0;
-	asm volatile("lfpc %0" : : "Q" (vcpu->arch.guest_fpregs.fpc));
+	/* make sure the new fpc will be lazily loaded */
+	save_fpu_regs();
+	current->thread.fpu.fpc = 0;
 	vcpu->arch.sie_block->gbea = 1;
 	vcpu->arch.sie_block->pp = 0;
 	vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID;
@@ -1365,8 +1581,11 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->epoch = vcpu->kvm->arch.epoch;
 	preempt_enable();
 	mutex_unlock(&vcpu->kvm->lock);
-	if (!kvm_is_ucontrol(vcpu->kvm))
+	if (!kvm_is_ucontrol(vcpu->kvm)) {
 		vcpu->arch.gmap = vcpu->kvm->arch.gmap;
+		sca_add_vcpu(vcpu);
+	}
+
 }
 
 static void kvm_s390_vcpu_crypto_setup(struct kvm_vcpu *vcpu)
@@ -1407,7 +1626,8 @@ static void kvm_s390_vcpu_setup_model(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.cpu_id = model->cpu_id;
 	vcpu->arch.sie_block->ibc = model->ibc;
-	vcpu->arch.sie_block->fac = (int) (long) model->fac->list;
+	if (test_kvm_facility(vcpu->kvm, 7))
+		vcpu->arch.sie_block->fac = (u32)(u64) model->fac_list;
 }
 
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
@@ -1435,10 +1655,13 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 		vcpu->arch.sie_block->eca |= 1;
 	if (sclp.has_sigpif)
 		vcpu->arch.sie_block->eca |= 0x10000000U;
+	if (test_kvm_facility(vcpu->kvm, 64))
+		vcpu->arch.sie_block->ecb3 |= 0x01;
 	if (test_kvm_facility(vcpu->kvm, 129)) {
 		vcpu->arch.sie_block->eca |= 0x00020000;
 		vcpu->arch.sie_block->ecd |= 0x20000000;
 	}
+	vcpu->arch.sie_block->riccbd = (unsigned long) &vcpu->run->s.regs.riccb;
 	vcpu->arch.sie_block->ictl |= ICTL_ISKE | ICTL_SSKE | ICTL_RRBE;
 
 	if (vcpu->kvm->arch.use_cmma) {
@@ -1461,7 +1684,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	struct sie_page *sie_page;
 	int rc = -EINVAL;
 
-	if (id >= KVM_MAX_VCPUS)
+	if (!kvm_is_ucontrol(kvm) && !sca_can_add_vcpu(kvm, id))
 		goto out;
 
 	rc = -ENOMEM;
@@ -1478,42 +1701,16 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	vcpu->arch.sie_block->itdba = (unsigned long) &sie_page->itdb;
 
 	vcpu->arch.sie_block->icpua = id;
-	if (!kvm_is_ucontrol(kvm)) {
-		if (!kvm->arch.sca) {
-			WARN_ON_ONCE(1);
-			goto out_free_cpu;
-		}
-		if (!kvm->arch.sca->cpu[id].sda)
-			kvm->arch.sca->cpu[id].sda =
-				(__u64) vcpu->arch.sie_block;
-		vcpu->arch.sie_block->scaoh =
-			(__u32)(((__u64)kvm->arch.sca) >> 32);
-		vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca;
-		set_bit(63 - id, (unsigned long *) &kvm->arch.sca->mcn);
-	}
-
 	spin_lock_init(&vcpu->arch.local_int.lock);
 	vcpu->arch.local_int.float_int = &kvm->arch.float_int;
 	vcpu->arch.local_int.wq = &vcpu->wq;
 	vcpu->arch.local_int.cpuflags = &vcpu->arch.sie_block->cpuflags;
-
-	/*
-	 * Allocate a save area for floating-point registers.  If the vector
-	 * extension is available, register contents are saved in the SIE
-	 * control block.  The allocated save area is still required in
-	 * particular places, for example, in kvm_s390_vcpu_store_status().
-	 */
-	vcpu->arch.guest_fpregs.fprs = kzalloc(sizeof(freg_t) * __NUM_FPRS,
-					       GFP_KERNEL);
-	if (!vcpu->arch.guest_fpregs.fprs) {
-		rc = -ENOMEM;
-		goto out_free_sie_block;
-	}
+	seqcount_init(&vcpu->arch.cputm_seqcount);
 
 	rc = kvm_vcpu_init(vcpu, kvm, id);
 	if (rc)
 		goto out_free_sie_block;
-	VM_EVENT(kvm, 3, "create cpu %d at %p, sie block at %p", id, vcpu,
+	VM_EVENT(kvm, 3, "create cpu %d at 0x%pK, sie block at 0x%pK", id, vcpu,
 		 vcpu->arch.sie_block);
 	trace_kvm_s390_create_vcpu(id, vcpu, vcpu->arch.sie_block);
 
@@ -1608,7 +1805,7 @@ static int kvm_arch_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu,
 			     (u64 __user *)reg->addr);
 		break;
 	case KVM_REG_S390_CPU_TIMER:
-		r = put_user(vcpu->arch.sie_block->cputm,
+		r = put_user(kvm_s390_get_cpu_timer(vcpu),
 			     (u64 __user *)reg->addr);
 		break;
 	case KVM_REG_S390_CLOCK_COMP:
@@ -1646,6 +1843,7 @@ static int kvm_arch_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu,
 					   struct kvm_one_reg *reg)
 {
 	int r = -EINVAL;
+	__u64 val;
 
 	switch (reg->id) {
 	case KVM_REG_S390_TODPR:
@@ -1657,8 +1855,9 @@ static int kvm_arch_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu,
 			     (u64 __user *)reg->addr);
 		break;
 	case KVM_REG_S390_CPU_TIMER:
-		r = get_user(vcpu->arch.sie_block->cputm,
-			     (u64 __user *)reg->addr);
+		r = get_user(val, (u64 __user *)reg->addr);
+		if (!r)
+			kvm_s390_set_cpu_timer(vcpu, val);
 		break;
 	case KVM_REG_S390_CLOCK_COMP:
 		r = get_user(vcpu->arch.sie_block->ckc,
@@ -1730,19 +1929,27 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 
 int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
+	/* make sure the new values will be lazily loaded */
+	save_fpu_regs();
 	if (test_fp_ctl(fpu->fpc))
 		return -EINVAL;
-	memcpy(vcpu->arch.guest_fpregs.fprs, &fpu->fprs, sizeof(fpu->fprs));
-	vcpu->arch.guest_fpregs.fpc = fpu->fpc;
-	save_fpu_regs();
-	load_fpu_from(&vcpu->arch.guest_fpregs);
+	current->thread.fpu.fpc = fpu->fpc;
+	if (MACHINE_HAS_VX)
+		convert_fp_to_vx(current->thread.fpu.vxrs, (freg_t *)fpu->fprs);
+	else
+		memcpy(current->thread.fpu.fprs, &fpu->fprs, sizeof(fpu->fprs));
 	return 0;
 }
 
 int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
 {
-	memcpy(&fpu->fprs, vcpu->arch.guest_fpregs.fprs, sizeof(fpu->fprs));
-	fpu->fpc = vcpu->arch.guest_fpregs.fpc;
+	/* make sure we have the latest values */
+	save_fpu_regs();
+	if (MACHINE_HAS_VX)
+		convert_vx_to_fp((freg_t *)fpu->fprs, current->thread.fpu.vxrs);
+	else
+		memcpy(fpu->fprs, current->thread.fpu.fprs, sizeof(fpu->fprs));
+	fpu->fpc = current->thread.fpu.fpc;
 	return 0;
 }
 
@@ -2009,7 +2216,8 @@ static int vcpu_pre_run(struct kvm_vcpu *vcpu)
 	 */
 	kvm_check_async_pf_completion(vcpu);
 
-	memcpy(&vcpu->arch.sie_block->gg14, &vcpu->run->s.regs.gprs[14], 16);
+	vcpu->arch.sie_block->gg14 = vcpu->run->s.regs.gprs[14];
+	vcpu->arch.sie_block->gg15 = vcpu->run->s.regs.gprs[15];
 
 	if (need_resched())
 		schedule();
@@ -2042,8 +2250,10 @@ static int vcpu_pre_run(struct kvm_vcpu *vcpu)
 
 static int vcpu_post_run_fault_in_sie(struct kvm_vcpu *vcpu)
 {
-	psw_t *psw = &vcpu->arch.sie_block->gpsw;
-	u8 opcode;
+	struct kvm_s390_pgm_info pgm_info = {
+		.code = PGM_ADDRESSING,
+	};
+	u8 opcode, ilen;
 	int rc;
 
 	VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
@@ -2057,18 +2267,25 @@ static int vcpu_post_run_fault_in_sie(struct kvm_vcpu *vcpu)
 	 * to look up the current opcode to get the length of the instruction
 	 * to be able to forward the PSW.
 	 */
-	rc = read_guest(vcpu, psw->addr, 0, &opcode, 1);
-	if (rc)
-		return kvm_s390_inject_prog_cond(vcpu, rc);
-	psw->addr = __rewind_psw(*psw, -insn_length(opcode));
-
-	return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+	rc = read_guest_instr(vcpu, &opcode, 1);
+	ilen = insn_length(opcode);
+	if (rc < 0) {
+		return rc;
+	} else if (rc) {
+		/* Instruction-Fetching Exceptions - we can't detect the ilen.
+		 * Forward by arbitrary ilc, injection will take care of
+		 * nullification if necessary.
+		 */
+		pgm_info = vcpu->arch.pgm;
+		ilen = 4;
+	}
+	pgm_info.flags = ilen | KVM_S390_PGM_FLAGS_ILC_VALID;
+	kvm_s390_forward_psw(vcpu, ilen);
+	return kvm_s390_inject_prog_irq(vcpu, &pgm_info);
 }
 
 static int vcpu_post_run(struct kvm_vcpu *vcpu, int exit_reason)
 {
-	int rc = -1;
-
 	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
 		   vcpu->arch.sie_block->icptcode);
 	trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
@@ -2076,40 +2293,36 @@ static int vcpu_post_run(struct kvm_vcpu *vcpu, int exit_reason)
 	if (guestdbg_enabled(vcpu))
 		kvm_s390_restore_guest_per_regs(vcpu);
 
-	if (exit_reason >= 0) {
-		rc = 0;
+	vcpu->run->s.regs.gprs[14] = vcpu->arch.sie_block->gg14;
+	vcpu->run->s.regs.gprs[15] = vcpu->arch.sie_block->gg15;
+
+	if (vcpu->arch.sie_block->icptcode > 0) {
+		int rc = kvm_handle_sie_intercept(vcpu);
+
+		if (rc != -EOPNOTSUPP)
+			return rc;
+		vcpu->run->exit_reason = KVM_EXIT_S390_SIEIC;
+		vcpu->run->s390_sieic.icptcode = vcpu->arch.sie_block->icptcode;
+		vcpu->run->s390_sieic.ipa = vcpu->arch.sie_block->ipa;
+		vcpu->run->s390_sieic.ipb = vcpu->arch.sie_block->ipb;
+		return -EREMOTE;
+	} else if (exit_reason != -EFAULT) {
+		vcpu->stat.exit_null++;
+		return 0;
 	} else if (kvm_is_ucontrol(vcpu->kvm)) {
 		vcpu->run->exit_reason = KVM_EXIT_S390_UCONTROL;
 		vcpu->run->s390_ucontrol.trans_exc_code =
 						current->thread.gmap_addr;
 		vcpu->run->s390_ucontrol.pgm_code = 0x10;
-		rc = -EREMOTE;
-
+		return -EREMOTE;
 	} else if (current->thread.gmap_pfault) {
 		trace_kvm_s390_major_guest_pfault(vcpu);
 		current->thread.gmap_pfault = 0;
-		if (kvm_arch_setup_async_pf(vcpu)) {
-			rc = 0;
-		} else {
-			gpa_t gpa = current->thread.gmap_addr;
-			rc = kvm_arch_fault_in_page(vcpu, gpa, 1);
-		}
+		if (kvm_arch_setup_async_pf(vcpu))
+			return 0;
+		return kvm_arch_fault_in_page(vcpu, current->thread.gmap_addr, 1);
 	}
-
-	if (rc == -1)
-		rc = vcpu_post_run_fault_in_sie(vcpu);
-
-	memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16);
-
-	if (rc == 0) {
-		if (kvm_is_ucontrol(vcpu->kvm))
-			/* Don't exit for host interrupts. */
-			rc = vcpu->arch.sie_block->icptcode ? -EOPNOTSUPP : 0;
-		else
-			rc = kvm_handle_sie_intercept(vcpu);
-	}
-
-	return rc;
+	return vcpu_post_run_fault_in_sie(vcpu);
 }
 
 static int __vcpu_run(struct kvm_vcpu *vcpu)
@@ -2134,10 +2347,12 @@ static int __vcpu_run(struct kvm_vcpu *vcpu)
 		 */
 		local_irq_disable();
 		__kvm_guest_enter();
+		__disable_cpu_timer_accounting(vcpu);
 		local_irq_enable();
 		exit_reason = sie64a(vcpu->arch.sie_block,
 				     vcpu->run->s.regs.gprs);
 		local_irq_disable();
+		__enable_cpu_timer_accounting(vcpu);
 		__kvm_guest_exit();
 		local_irq_enable();
 		vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
@@ -2161,7 +2376,7 @@ static void sync_regs(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
 	}
 	if (kvm_run->kvm_dirty_regs & KVM_SYNC_ARCH0) {
-		vcpu->arch.sie_block->cputm = kvm_run->s.regs.cputm;
+		kvm_s390_set_cpu_timer(vcpu, kvm_run->s.regs.cputm);
 		vcpu->arch.sie_block->ckc = kvm_run->s.regs.ckc;
 		vcpu->arch.sie_block->todpr = kvm_run->s.regs.todpr;
 		vcpu->arch.sie_block->pp = kvm_run->s.regs.pp;
@@ -2183,7 +2398,7 @@ static void store_regs(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	kvm_run->psw_addr = vcpu->arch.sie_block->gpsw.addr;
 	kvm_run->s.regs.prefix = kvm_s390_get_prefix(vcpu);
 	memcpy(&kvm_run->s.regs.crs, &vcpu->arch.sie_block->gcr, 128);
-	kvm_run->s.regs.cputm = vcpu->arch.sie_block->cputm;
+	kvm_run->s.regs.cputm = kvm_s390_get_cpu_timer(vcpu);
 	kvm_run->s.regs.ckc = vcpu->arch.sie_block->ckc;
 	kvm_run->s.regs.todpr = vcpu->arch.sie_block->todpr;
 	kvm_run->s.regs.pp = vcpu->arch.sie_block->pp;
@@ -2215,6 +2430,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	sync_regs(vcpu, kvm_run);
+	enable_cpu_timer_accounting(vcpu);
 
 	might_fault();
 	rc = __vcpu_run(vcpu);
@@ -2229,21 +2445,12 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		rc = 0;
 	}
 
-	if (rc == -EOPNOTSUPP) {
-		/* intercept cannot be handled in-kernel, prepare kvm-run */
-		kvm_run->exit_reason         = KVM_EXIT_S390_SIEIC;
-		kvm_run->s390_sieic.icptcode = vcpu->arch.sie_block->icptcode;
-		kvm_run->s390_sieic.ipa      = vcpu->arch.sie_block->ipa;
-		kvm_run->s390_sieic.ipb      = vcpu->arch.sie_block->ipb;
-		rc = 0;
-	}
-
 	if (rc == -EREMOTE) {
-		/* intercept was handled, but userspace support is needed
-		 * kvm_run has been prepared by the handler */
+		/* userspace support is needed, kvm_run has been prepared */
 		rc = 0;
 	}
 
+	disable_cpu_timer_accounting(vcpu);
 	store_regs(vcpu, kvm_run);
 
 	if (vcpu->sigset_active)
@@ -2262,41 +2469,51 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long gpa)
 {
 	unsigned char archmode = 1;
+	freg_t fprs[NUM_FPRS];
 	unsigned int px;
-	u64 clkcomp;
+	u64 clkcomp, cputm;
 	int rc;
 
+	px = kvm_s390_get_prefix(vcpu);
 	if (gpa == KVM_S390_STORE_STATUS_NOADDR) {
 		if (write_guest_abs(vcpu, 163, &archmode, 1))
 			return -EFAULT;
-		gpa = SAVE_AREA_BASE;
+		gpa = 0;
 	} else if (gpa == KVM_S390_STORE_STATUS_PREFIXED) {
 		if (write_guest_real(vcpu, 163, &archmode, 1))
 			return -EFAULT;
-		gpa = kvm_s390_real_to_abs(vcpu, SAVE_AREA_BASE);
+		gpa = px;
+	} else
+		gpa -= __LC_FPREGS_SAVE_AREA;
+
+	/* manually convert vector registers if necessary */
+	if (MACHINE_HAS_VX) {
+		convert_vx_to_fp(fprs, (__vector128 *) vcpu->run->s.regs.vrs);
+		rc = write_guest_abs(vcpu, gpa + __LC_FPREGS_SAVE_AREA,
+				     fprs, 128);
+	} else {
+		rc = write_guest_abs(vcpu, gpa + __LC_FPREGS_SAVE_AREA,
+				     vcpu->run->s.regs.fprs, 128);
 	}
-	rc = write_guest_abs(vcpu, gpa + offsetof(struct save_area, fp_regs),
-			     vcpu->arch.guest_fpregs.fprs, 128);
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, gp_regs),
+	rc |= write_guest_abs(vcpu, gpa + __LC_GPREGS_SAVE_AREA,
 			      vcpu->run->s.regs.gprs, 128);
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, psw),
+	rc |= write_guest_abs(vcpu, gpa + __LC_PSW_SAVE_AREA,
 			      &vcpu->arch.sie_block->gpsw, 16);
-	px = kvm_s390_get_prefix(vcpu);
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, pref_reg),
+	rc |= write_guest_abs(vcpu, gpa + __LC_PREFIX_SAVE_AREA,
 			      &px, 4);
-	rc |= write_guest_abs(vcpu,
-			      gpa + offsetof(struct save_area, fp_ctrl_reg),
-			      &vcpu->arch.guest_fpregs.fpc, 4);
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, tod_reg),
+	rc |= write_guest_abs(vcpu, gpa + __LC_FP_CREG_SAVE_AREA,
+			      &vcpu->run->s.regs.fpc, 4);
+	rc |= write_guest_abs(vcpu, gpa + __LC_TOD_PROGREG_SAVE_AREA,
 			      &vcpu->arch.sie_block->todpr, 4);
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, timer),
-			      &vcpu->arch.sie_block->cputm, 8);
+	cputm = kvm_s390_get_cpu_timer(vcpu);
+	rc |= write_guest_abs(vcpu, gpa + __LC_CPU_TIMER_SAVE_AREA,
+			      &cputm, 8);
 	clkcomp = vcpu->arch.sie_block->ckc >> 8;
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, clk_cmp),
+	rc |= write_guest_abs(vcpu, gpa + __LC_CLOCK_COMP_SAVE_AREA,
 			      &clkcomp, 8);
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, acc_regs),
+	rc |= write_guest_abs(vcpu, gpa + __LC_AREGS_SAVE_AREA,
 			      &vcpu->run->s.regs.acrs, 64);
-	rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, ctrl_regs),
+	rc |= write_guest_abs(vcpu, gpa + __LC_CREGS_SAVE_AREA,
 			      &vcpu->arch.sie_block->gcr, 128);
 	return rc ? -EFAULT : 0;
 }
@@ -2309,19 +2526,7 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr)
 	 * it into the save area
 	 */
 	save_fpu_regs();
-	if (test_kvm_facility(vcpu->kvm, 129)) {
-		/*
-		 * If the vector extension is available, the vector registers
-		 * which overlaps with floating-point registers are saved in
-		 * the SIE-control block.  Hence, extract the floating-point
-		 * registers and the FPC value and store them in the
-		 * guest_fpregs structure.
-		 */
-		vcpu->arch.guest_fpregs.fpc = current->thread.fpu.fpc;
-		convert_vx_to_fp(vcpu->arch.guest_fpregs.fprs,
-				 current->thread.fpu.vxrs);
-	} else
-		save_fpu_to(&vcpu->arch.guest_fpregs);
+	vcpu->run->s.regs.fpc = current->thread.fpu.fpc;
 	save_access_regs(vcpu->run->s.regs.acrs);
 
 	return kvm_s390_store_status_unloaded(vcpu, addr);
@@ -2508,7 +2713,8 @@ static long kvm_s390_guest_mem_op(struct kvm_vcpu *vcpu,
 	switch (mop->op) {
 	case KVM_S390_MEMOP_LOGICAL_READ:
 		if (mop->flags & KVM_S390_MEMOP_F_CHECK_ONLY) {
-			r = check_gva_range(vcpu, mop->gaddr, mop->ar, mop->size, false);
+			r = check_gva_range(vcpu, mop->gaddr, mop->ar,
+					    mop->size, GACC_FETCH);
 			break;
 		}
 		r = read_guest(vcpu, mop->gaddr, mop->ar, tmpbuf, mop->size);
@@ -2519,7 +2725,8 @@ static long kvm_s390_guest_mem_op(struct kvm_vcpu *vcpu,
 		break;
 	case KVM_S390_MEMOP_LOGICAL_WRITE:
 		if (mop->flags & KVM_S390_MEMOP_F_CHECK_ONLY) {
-			r = check_gva_range(vcpu, mop->gaddr, mop->ar, mop->size, true);
+			r = check_gva_range(vcpu, mop->gaddr, mop->ar,
+					    mop->size, GACC_STORE);
 			break;
 		}
 		if (copy_from_user(tmpbuf, uaddr, mop->size)) {
@@ -2732,6 +2939,9 @@ int kvm_arch_prepare_memory_region(struct kvm *kvm,
 	if (mem->memory_size & 0xffffful)
 		return -EINVAL;
 
+	if (mem->guest_phys_addr + mem->memory_size > kvm->arch.mem_limit)
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -2763,6 +2973,11 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 
 static int __init kvm_s390_init(void)
 {
+	if (!sclp.has_sief2) {
+		pr_info("SIE not available\n");
+		return -ENODEV;
+	}
+
 	return kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE);
 }
 
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 1e70e00d3c5e..8621ab00ec8e 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -19,6 +19,7 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 #include <asm/facility.h>
+#include <asm/processor.h>
 
 typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
@@ -53,6 +54,11 @@ static inline int is_vcpu_stopped(struct kvm_vcpu *vcpu)
 	return atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_STOPPED;
 }
 
+static inline int is_vcpu_idle(struct kvm_vcpu *vcpu)
+{
+	return atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_WAIT;
+}
+
 static inline int kvm_is_ucontrol(struct kvm *kvm)
 {
 #ifdef CONFIG_KVM_S390_UCONTROL
@@ -154,8 +160,8 @@ static inline void kvm_s390_set_psw_cc(struct kvm_vcpu *vcpu, unsigned long cc)
 /* test availability of facility in a kvm instance */
 static inline int test_kvm_facility(struct kvm *kvm, unsigned long nr)
 {
-	return __test_facility(nr, kvm->arch.model.fac->mask) &&
-		__test_facility(nr, kvm->arch.model.fac->list);
+	return __test_facility(nr, kvm->arch.model.fac_mask) &&
+		__test_facility(nr, kvm->arch.model.fac_list);
 }
 
 static inline int set_kvm_facility(u64 *fac_list, unsigned long nr)
@@ -212,8 +218,22 @@ int kvm_s390_reinject_io_int(struct kvm *kvm,
 int kvm_s390_mask_adapter(struct kvm *kvm, unsigned int id, bool masked);
 
 /* implemented in intercept.c */
-void kvm_s390_rewind_psw(struct kvm_vcpu *vcpu, int ilc);
+u8 kvm_s390_get_ilen(struct kvm_vcpu *vcpu);
 int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu);
+static inline void kvm_s390_rewind_psw(struct kvm_vcpu *vcpu, int ilen)
+{
+	struct kvm_s390_sie_block *sie_block = vcpu->arch.sie_block;
+
+	sie_block->gpsw.addr = __rewind_psw(sie_block->gpsw, ilen);
+}
+static inline void kvm_s390_forward_psw(struct kvm_vcpu *vcpu, int ilen)
+{
+	kvm_s390_rewind_psw(vcpu, -ilen);
+}
+static inline void kvm_s390_retry_instr(struct kvm_vcpu *vcpu)
+{
+	kvm_s390_rewind_psw(vcpu, kvm_s390_get_ilen(vcpu));
+}
 
 /* implemented in priv.c */
 int is_valid_psw(psw_t *psw);
@@ -248,6 +268,8 @@ int kvm_s390_vcpu_setup_cmma(struct kvm_vcpu *vcpu);
 void kvm_s390_vcpu_unsetup_cmma(struct kvm_vcpu *vcpu);
 unsigned long kvm_s390_fac_list_mask_size(void);
 extern unsigned long kvm_s390_fac_list_mask[];
+void kvm_s390_set_cpu_timer(struct kvm_vcpu *vcpu, __u64 cputm);
+__u64 kvm_s390_get_cpu_timer(struct kvm_vcpu *vcpu);
 
 /* implemented in diag.c */
 int kvm_s390_handle_diag(struct kvm_vcpu *vcpu);
@@ -340,4 +362,11 @@ void kvm_s390_clear_bp_data(struct kvm_vcpu *vcpu);
 void kvm_s390_prepare_debug_exit(struct kvm_vcpu *vcpu);
 void kvm_s390_handle_per_event(struct kvm_vcpu *vcpu);
 
+/* support for Basic/Extended SCA handling */
+static inline union ipte_control *kvm_s390_get_ipte_control(struct kvm *kvm)
+{
+	struct bsca_block *sca = kvm->arch.sca; /* SCA version doesn't matter */
+
+	return &sca->ipte_control;
+}
 #endif
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 77191b85ea7a..0a1591d3d25d 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -23,6 +23,7 @@
 #include <asm/sysinfo.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/gmap.h>
 #include <asm/io.h>
 #include <asm/ptrace.h>
 #include <asm/compat.h>
@@ -173,7 +174,7 @@ static int handle_skey(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
 		return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
 
-	kvm_s390_rewind_psw(vcpu, 4);
+	kvm_s390_retry_instr(vcpu);
 	VCPU_EVENT(vcpu, 4, "%s", "retrying storage key operation");
 	return 0;
 }
@@ -184,7 +185,7 @@ static int handle_ipte_interlock(struct kvm_vcpu *vcpu)
 	if (psw_bits(vcpu->arch.sie_block->gpsw).p)
 		return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
 	wait_event(vcpu->kvm->arch.ipte_wq, !ipte_lock_held(vcpu));
-	kvm_s390_rewind_psw(vcpu, 4);
+	kvm_s390_retry_instr(vcpu);
 	VCPU_EVENT(vcpu, 4, "%s", "retrying ipte interlock operation");
 	return 0;
 }
@@ -354,8 +355,8 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 	 * We need to shift the lower 32 facility bits (bit 0-31) from a u64
 	 * into a u32 memory representation. They will remain bits 0-31.
 	 */
-	fac = *vcpu->kvm->arch.model.fac->list >> 32;
-	rc = write_guest_lc(vcpu, offsetof(struct _lowcore, stfl_fac_list),
+	fac = *vcpu->kvm->arch.model.fac_list >> 32;
+	rc = write_guest_lc(vcpu, offsetof(struct lowcore, stfl_fac_list),
 			    &fac, sizeof(fac));
 	if (rc)
 		return rc;
@@ -660,7 +661,7 @@ static int handle_pfmf(struct kvm_vcpu *vcpu)
 
 	kvm_s390_get_regs_rre(vcpu, &reg1, &reg2);
 
-	if (!MACHINE_HAS_PFMF)
+	if (!test_kvm_facility(vcpu->kvm, 8))
 		return kvm_s390_inject_program_int(vcpu, PGM_OPERATION);
 
 	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
@@ -759,8 +760,8 @@ static int handle_essa(struct kvm_vcpu *vcpu)
 	if (((vcpu->arch.sie_block->ipb & 0xf0000000) >> 28) > 6)
 		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
 
-	/* Rewind PSW to repeat the ESSA instruction */
-	kvm_s390_rewind_psw(vcpu, 4);
+	/* Retry the ESSA instruction */
+	kvm_s390_retry_instr(vcpu);
 	vcpu->arch.sie_block->cbrlo &= PAGE_MASK;	/* reset nceo */
 	cbrlo = phys_to_virt(vcpu->arch.sie_block->cbrlo);
 	down_read(&gmap->mm->mmap_sem);
@@ -981,11 +982,12 @@ static int handle_tprot(struct kvm_vcpu *vcpu)
 		return -EOPNOTSUPP;
 	if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_DAT)
 		ipte_lock(vcpu);
-	ret = guest_translate_address(vcpu, address1, ar, &gpa, 1);
+	ret = guest_translate_address(vcpu, address1, ar, &gpa, GACC_STORE);
 	if (ret == PGM_PROTECTION) {
 		/* Write protected? Try again with read-only... */
 		cc = 1;
-		ret = guest_translate_address(vcpu, address1, ar, &gpa, 0);
+		ret = guest_translate_address(vcpu, address1, ar, &gpa,
+					      GACC_FETCH);
 	}
 	if (ret) {
 		if (ret == PGM_ADDRESSING || ret == PGM_TRANSLATION_SPEC) {
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index da690b69f9fe..77c22d685c7a 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -291,12 +291,8 @@ static int handle_sigp_dst(struct kvm_vcpu *vcpu, u8 order_code,
 			   u16 cpu_addr, u32 parameter, u64 *status_reg)
 {
 	int rc;
-	struct kvm_vcpu *dst_vcpu;
+	struct kvm_vcpu *dst_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, cpu_addr);
 
-	if (cpu_addr >= KVM_MAX_VCPUS)
-		return SIGP_CC_NOT_OPERATIONAL;
-
-	dst_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr);
 	if (!dst_vcpu)
 		return SIGP_CC_NOT_OPERATIONAL;
 
@@ -478,7 +474,7 @@ int kvm_s390_handle_sigp_pei(struct kvm_vcpu *vcpu)
 	trace_kvm_s390_handle_sigp_pei(vcpu, order_code, cpu_addr);
 
 	if (order_code == SIGP_EXTERNAL_CALL) {
-		dest_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr);
+		dest_vcpu = kvm_get_vcpu_by_id(vcpu->kvm, cpu_addr);
 		BUG_ON(dest_vcpu == NULL);
 
 		kvm_s390_vcpu_wakeup(dest_vcpu);
diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h
index cc1d6c68356f..396485bca191 100644
--- a/arch/s390/kvm/trace-s390.h
+++ b/arch/s390/kvm/trace-s390.h
@@ -55,8 +55,8 @@ TRACE_EVENT(kvm_s390_create_vcpu,
 		    __entry->sie_block = sie_block;
 		    ),
 
-	    TP_printk("create cpu %d at %p, sie block at %p", __entry->id,
-		      __entry->vcpu, __entry->sie_block)
+	    TP_printk("create cpu %d at 0x%pK, sie block at 0x%pK",
+		      __entry->id, __entry->vcpu, __entry->sie_block)
 	);
 
 TRACE_EVENT(kvm_s390_destroy_vcpu,
@@ -254,7 +254,7 @@ TRACE_EVENT(kvm_s390_enable_css,
 		    __entry->kvm = kvm;
 		    ),
 
-	    TP_printk("enabling channel I/O support (kvm @ %p)\n",
+	    TP_printk("enabling channel I/O support (kvm @ %pK)\n",
 		      __entry->kvm)
 	);
 
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 0e8fefe5b0ce..1d1af31e8354 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -3,7 +3,7 @@
 #
 
 lib-y += delay.o string.o uaccess.o find.o
-obj-y += mem.o
+obj-y += mem.o xor.o
 lib-$(CONFIG_SMP) += spinlock.o
 lib-$(CONFIG_KPROBES) += probes.o
 lib-$(CONFIG_UPROBES) += probes.o
diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c
index 427aa44b3505..d4549c964589 100644
--- a/arch/s390/lib/spinlock.c
+++ b/arch/s390/lib/spinlock.c
@@ -37,12 +37,22 @@ static inline void _raw_compare_and_delay(unsigned int *lock, unsigned int old)
 	asm(".insn rsy,0xeb0000000022,%0,0,%1" : : "d" (old), "Q" (*lock));
 }
 
+static inline int cpu_is_preempted(int cpu)
+{
+	if (test_cpu_flag_of(CIF_ENABLED_WAIT, cpu))
+		return 0;
+	if (smp_vcpu_scheduled(cpu))
+		return 0;
+	return 1;
+}
+
 void arch_spin_lock_wait(arch_spinlock_t *lp)
 {
 	unsigned int cpu = SPINLOCK_LOCKVAL;
 	unsigned int owner;
-	int count;
+	int count, first_diag;
 
+	first_diag = 1;
 	while (1) {
 		owner = ACCESS_ONCE(lp->lock);
 		/* Try to get the lock if it is free. */
@@ -51,9 +61,10 @@ void arch_spin_lock_wait(arch_spinlock_t *lp)
 				return;
 			continue;
 		}
-		/* Check if the lock owner is running. */
-		if (!smp_vcpu_scheduled(~owner)) {
+		/* First iteration: check if the lock owner is running. */
+		if (first_diag && cpu_is_preempted(~owner)) {
 			smp_yield_cpu(~owner);
+			first_diag = 0;
 			continue;
 		}
 		/* Loop for a while on the lock value. */
@@ -67,10 +78,13 @@ void arch_spin_lock_wait(arch_spinlock_t *lp)
 			continue;
 		/*
 		 * For multiple layers of hypervisors, e.g. z/VM + LPAR
-		 * yield the CPU if the lock is still unavailable.
+		 * yield the CPU unconditionally. For LPAR rely on the
+		 * sense running status.
 		 */
-		if (!MACHINE_IS_LPAR)
+		if (!MACHINE_IS_LPAR || cpu_is_preempted(~owner)) {
 			smp_yield_cpu(~owner);
+			first_diag = 0;
+		}
 	}
 }
 EXPORT_SYMBOL(arch_spin_lock_wait);
@@ -79,9 +93,10 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags)
 {
 	unsigned int cpu = SPINLOCK_LOCKVAL;
 	unsigned int owner;
-	int count;
+	int count, first_diag;
 
 	local_irq_restore(flags);
+	first_diag = 1;
 	while (1) {
 		owner = ACCESS_ONCE(lp->lock);
 		/* Try to get the lock if it is free. */
@@ -92,8 +107,9 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags)
 			local_irq_restore(flags);
 		}
 		/* Check if the lock owner is running. */
-		if (!smp_vcpu_scheduled(~owner)) {
+		if (first_diag && cpu_is_preempted(~owner)) {
 			smp_yield_cpu(~owner);
+			first_diag = 0;
 			continue;
 		}
 		/* Loop for a while on the lock value. */
@@ -107,10 +123,13 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags)
 			continue;
 		/*
 		 * For multiple layers of hypervisors, e.g. z/VM + LPAR
-		 * yield the CPU if the lock is still unavailable.
+		 * yield the CPU unconditionally. For LPAR rely on the
+		 * sense running status.
 		 */
-		if (!MACHINE_IS_LPAR)
+		if (!MACHINE_IS_LPAR || cpu_is_preempted(~owner)) {
 			smp_yield_cpu(~owner);
+			first_diag = 0;
+		}
 	}
 }
 EXPORT_SYMBOL(arch_spin_lock_wait_flags);
@@ -145,7 +164,7 @@ void _raw_read_lock_wait(arch_rwlock_t *rw)
 	owner = 0;
 	while (1) {
 		if (count-- <= 0) {
-			if (owner && !smp_vcpu_scheduled(~owner))
+			if (owner && cpu_is_preempted(~owner))
 				smp_yield_cpu(~owner);
 			count = spin_retry;
 		}
@@ -191,7 +210,7 @@ void _raw_write_lock_wait(arch_rwlock_t *rw, unsigned int prev)
 	owner = 0;
 	while (1) {
 		if (count-- <= 0) {
-			if (owner && !smp_vcpu_scheduled(~owner))
+			if (owner && cpu_is_preempted(~owner))
 				smp_yield_cpu(~owner);
 			count = spin_retry;
 		}
@@ -221,7 +240,7 @@ void _raw_write_lock_wait(arch_rwlock_t *rw)
 	owner = 0;
 	while (1) {
 		if (count-- <= 0) {
-			if (owner && !smp_vcpu_scheduled(~owner))
+			if (owner && cpu_is_preempted(~owner))
 				smp_yield_cpu(~owner);
 			count = spin_retry;
 		}
@@ -265,7 +284,7 @@ void arch_lock_relax(unsigned int cpu)
 {
 	if (!cpu)
 		return;
-	if (MACHINE_IS_LPAR && smp_vcpu_scheduled(~cpu))
+	if (MACHINE_IS_LPAR && !cpu_is_preempted(~cpu))
 		return;
 	smp_yield_cpu(~cpu);
 }
diff --git a/arch/s390/lib/xor.c b/arch/s390/lib/xor.c
new file mode 100644
index 000000000000..7d94e3ec34a9
--- /dev/null
+++ b/arch/s390/lib/xor.c
@@ -0,0 +1,134 @@
+/*
+ * Optimized xor_block operation for RAID4/5
+ *
+ * Copyright IBM Corp. 2016
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/raid/xor.h>
+
+static void xor_xc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	asm volatile(
+		"	larl	1,2f\n"
+		"	aghi	%0,-1\n"
+		"	jm	3f\n"
+		"	srlg	0,%0,8\n"
+		"	ltgr	0,0\n"
+		"	jz	1f\n"
+		"0:	xc	0(256,%1),0(%2)\n"
+		"	la	%1,256(%1)\n"
+		"	la	%2,256(%2)\n"
+		"	brctg	0,0b\n"
+		"1:	ex	%0,0(1)\n"
+		"	j	3f\n"
+		"2:	xc	0(1,%1),0(%2)\n"
+		"3:\n"
+		: : "d" (bytes), "a" (p1), "a" (p2)
+		: "0", "1", "cc", "memory");
+}
+
+static void xor_xc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		     unsigned long *p3)
+{
+	asm volatile(
+		"	larl	1,2f\n"
+		"	aghi	%0,-1\n"
+		"	jm	3f\n"
+		"	srlg	0,%0,8\n"
+		"	ltgr	0,0\n"
+		"	jz	1f\n"
+		"0:	xc	0(256,%1),0(%2)\n"
+		"	xc	0(256,%1),0(%3)\n"
+		"	la	%1,256(%1)\n"
+		"	la	%2,256(%2)\n"
+		"	la	%3,256(%3)\n"
+		"	brctg	0,0b\n"
+		"1:	ex	%0,0(1)\n"
+		"	ex	%0,6(1)\n"
+		"	j	3f\n"
+		"2:	xc	0(1,%1),0(%2)\n"
+		"	xc	0(1,%1),0(%3)\n"
+		"3:\n"
+		: "+d" (bytes), "+a" (p1), "+a" (p2), "+a" (p3)
+		: : "0", "1", "cc", "memory");
+}
+
+static void xor_xc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		     unsigned long *p3, unsigned long *p4)
+{
+	asm volatile(
+		"	larl	1,2f\n"
+		"	aghi	%0,-1\n"
+		"	jm	3f\n"
+		"	srlg	0,%0,8\n"
+		"	ltgr	0,0\n"
+		"	jz	1f\n"
+		"0:	xc	0(256,%1),0(%2)\n"
+		"	xc	0(256,%1),0(%3)\n"
+		"	xc	0(256,%1),0(%4)\n"
+		"	la	%1,256(%1)\n"
+		"	la	%2,256(%2)\n"
+		"	la	%3,256(%3)\n"
+		"	la	%4,256(%4)\n"
+		"	brctg	0,0b\n"
+		"1:	ex	%0,0(1)\n"
+		"	ex	%0,6(1)\n"
+		"	ex	%0,12(1)\n"
+		"	j	3f\n"
+		"2:	xc	0(1,%1),0(%2)\n"
+		"	xc	0(1,%1),0(%3)\n"
+		"	xc	0(1,%1),0(%4)\n"
+		"3:\n"
+		: "+d" (bytes), "+a" (p1), "+a" (p2), "+a" (p3), "+a" (p4)
+		: : "0", "1", "cc", "memory");
+}
+
+static void xor_xc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		     unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	/* Get around a gcc oddity */
+	register unsigned long *reg7 asm ("7") = p5;
+
+	asm volatile(
+		"	larl	1,2f\n"
+		"	aghi	%0,-1\n"
+		"	jm	3f\n"
+		"	srlg	0,%0,8\n"
+		"	ltgr	0,0\n"
+		"	jz	1f\n"
+		"0:	xc	0(256,%1),0(%2)\n"
+		"	xc	0(256,%1),0(%3)\n"
+		"	xc	0(256,%1),0(%4)\n"
+		"	xc	0(256,%1),0(%5)\n"
+		"	la	%1,256(%1)\n"
+		"	la	%2,256(%2)\n"
+		"	la	%3,256(%3)\n"
+		"	la	%4,256(%4)\n"
+		"	la	%5,256(%5)\n"
+		"	brctg	0,0b\n"
+		"1:	ex	%0,0(1)\n"
+		"	ex	%0,6(1)\n"
+		"	ex	%0,12(1)\n"
+		"	ex	%0,18(1)\n"
+		"	j	3f\n"
+		"2:	xc	0(1,%1),0(%2)\n"
+		"	xc	0(1,%1),0(%3)\n"
+		"	xc	0(1,%1),0(%4)\n"
+		"	xc	0(1,%1),0(%5)\n"
+		"3:\n"
+		: "+d" (bytes), "+a" (p1), "+a" (p2), "+a" (p3), "+a" (p4),
+		  "+a" (reg7)
+		: : "0", "1", "cc", "memory");
+}
+
+struct xor_block_template xor_block_xc = {
+	.name = "xc",
+	.do_2 = xor_xc_2,
+	.do_3 = xor_xc_3,
+	.do_4 = xor_xc_4,
+	.do_5 = xor_xc_5,
+};
+EXPORT_SYMBOL(xor_block_xc);
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index 839592ca265c..0aa0ad165d8b 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -2,9 +2,11 @@
 # Makefile for the linux s390-specific parts of the memory manager.
 #
 
-obj-y		:= init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
-obj-y		+= page-states.o gup.o extable.o pageattr.o mem_detect.o
+obj-y		:= init.o fault.o extmem.o mmap.o vmem.o maccess.o
+obj-y		+= page-states.o gup.o pageattr.o mem_detect.o
+obj-y		+= pgtable.o pgalloc.o
 
 obj-$(CONFIG_CMM)		+= cmm.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_S390_PTDUMP)	+= dump_pagetables.o
+obj-$(CONFIG_PGSTE)		+= gmap.o
diff --git a/arch/s390/mm/extable.c b/arch/s390/mm/extable.c
deleted file mode 100644
index 4d1ee88864e8..000000000000
--- a/arch/s390/mm/extable.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <linux/module.h>
-#include <linux/sort.h>
-#include <asm/uaccess.h>
-
-/*
- * Search one exception table for an entry corresponding to the
- * given instruction address, and return the address of the entry,
- * or NULL if none is found.
- * We use a binary search, and thus we assume that the table is
- * already sorted.
- */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-	const struct exception_table_entry *mid;
-	unsigned long addr;
-
-	while (first <= last) {
-		mid = ((last - first) >> 1) + first;
-		addr = extable_insn(mid);
-		if (addr < value)
-			first = mid + 1;
-		else if (addr > value)
-			last = mid - 1;
-		else
-			return mid;
-	}
-	return NULL;
-}
-
-/*
- * The exception table needs to be sorted so that the binary
- * search that we use to find entries in it works properly.
- * This is used both for the kernel exception table and for
- * the exception tables of modules that get loaded.
- *
- */
-static int cmp_ex(const void *a, const void *b)
-{
-	const struct exception_table_entry *x = a, *y = b;
-
-	/* This compare is only valid after normalization. */
-	return x->insn - y->insn;
-}
-
-void sort_extable(struct exception_table_entry *start,
-		  struct exception_table_entry *finish)
-{
-	struct exception_table_entry *p;
-	int i;
-
-	/* Normalize entries to being relative to the start of the section */
-	for (p = start, i = 0; p < finish; p++, i += 8)
-		p->insn += i;
-	sort(start, finish - start, sizeof(*start), cmp_ex, NULL);
-	/* Denormalize all entries */
-	for (p = start, i = 0; p < finish; p++, i += 8)
-		p->insn -= i;
-}
-
-#ifdef CONFIG_MODULES
-/*
- * If the exception table is sorted, any referring to the module init
- * will be at the beginning or the end.
- */
-void trim_init_extable(struct module *m)
-{
-	/* Trim the beginning */
-	while (m->num_exentries &&
-	       within_module_init(extable_insn(&m->extable[0]), m)) {
-		m->extable++;
-		m->num_exentries--;
-	}
-	/* Trim the end */
-	while (m->num_exentries &&
-	       within_module_init(extable_insn(&m->extable[m->num_exentries-1]), m))
-		m->num_exentries--;
-}
-#endif /* CONFIG_MODULES */
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 18fccc303db7..02042b6b66bf 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -94,7 +94,7 @@ static DEFINE_MUTEX(dcss_lock);
 static LIST_HEAD(dcss_list);
 static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC",
 					"EW/EN-MIXED" };
-static int loadshr_scode, loadnsr_scode, findseg_scode;
+static int loadshr_scode, loadnsr_scode;
 static int segext_scode, purgeseg_scode;
 static int scode_set;
 
@@ -130,7 +130,6 @@ dcss_set_subcodes(void)
 		loadshr_scode = DCSS_LOADSHRX;
 		loadnsr_scode = DCSS_LOADNSRX;
 		purgeseg_scode = DCSS_PURGESEG;
-		findseg_scode = DCSS_FINDSEGX;
 		segext_scode = DCSS_SEGEXTX;
 		return 0;
 	}
@@ -138,7 +137,6 @@ dcss_set_subcodes(void)
 	loadshr_scode = DCSS_LOADNOLY;
 	loadnsr_scode = DCSS_LOADNSR;
 	purgeseg_scode = DCSS_PURGESEG;
-	findseg_scode = DCSS_FINDSEG;
 	segext_scode = DCSS_SEGEXT;
 	return 0;
 }
@@ -267,7 +265,7 @@ query_segment_type (struct dcss_segment *seg)
 		goto out_free;
 	}
 	if (diag_cc > 1) {
-		pr_warning("Querying a DCSS type failed with rc=%ld\n", vmrc);
+		pr_warn("Querying a DCSS type failed with rc=%ld\n", vmrc);
 		rc = dcss_diag_translate_rc (vmrc);
 		goto out_free;
 	}
@@ -459,8 +457,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 		goto out_resource;
 	}
 	if (diag_cc > 1) {
-		pr_warning("Loading DCSS %s failed with rc=%ld\n", name,
-			   end_addr);
+		pr_warn("Loading DCSS %s failed with rc=%ld\n", name, end_addr);
 		rc = dcss_diag_translate_rc(end_addr);
 		dcss_diag(&purgeseg_scode, seg->dcss_name,
 				&dummy, &dummy);
@@ -576,8 +573,7 @@ segment_modify_shared (char *name, int do_nonshared)
 		goto out_unlock;
 	}
 	if (atomic_read (&seg->ref_count) != 1) {
-		pr_warning("DCSS %s is in use and cannot be reloaded\n",
-			   name);
+		pr_warn("DCSS %s is in use and cannot be reloaded\n", name);
 		rc = -EAGAIN;
 		goto out_unlock;
 	}
@@ -590,8 +586,8 @@ segment_modify_shared (char *name, int do_nonshared)
 			seg->res->flags |= IORESOURCE_READONLY;
 
 	if (request_resource(&iomem_resource, seg->res)) {
-		pr_warning("DCSS %s overlaps with used memory resources "
-			   "and cannot be reloaded\n", name);
+		pr_warn("DCSS %s overlaps with used memory resources and cannot be reloaded\n",
+			name);
 		rc = -EBUSY;
 		kfree(seg->res);
 		goto out_del_mem;
@@ -609,8 +605,8 @@ segment_modify_shared (char *name, int do_nonshared)
 		goto out_del_res;
 	}
 	if (diag_cc > 1) {
-		pr_warning("Reloading DCSS %s failed with rc=%ld\n", name,
-			   end_addr);
+		pr_warn("Reloading DCSS %s failed with rc=%ld\n",
+			name, end_addr);
 		rc = dcss_diag_translate_rc(end_addr);
 		goto out_del_res;
 	}
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index ec1a30d0d11a..cce577feab1e 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -32,6 +32,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/diag.h>
 #include <asm/pgtable.h>
+#include <asm/gmap.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/facility.h>
@@ -183,6 +184,8 @@ static void dump_fault_info(struct pt_regs *regs)
 {
 	unsigned long asce;
 
+	pr_alert("Failing address: %016lx TEID: %016lx\n",
+		 regs->int_parm_long & __FAIL_ADDR_MASK, regs->int_parm_long);
 	pr_alert("Fault in ");
 	switch (regs->int_parm_long & 3) {
 	case 3:
@@ -218,7 +221,9 @@ static void dump_fault_info(struct pt_regs *regs)
 	dump_pagetable(asce, regs->int_parm_long & __FAIL_ADDR_MASK);
 }
 
-static inline void report_user_fault(struct pt_regs *regs, long signr)
+int show_unhandled_signals = 1;
+
+void report_user_fault(struct pt_regs *regs, long signr, int is_mm_fault)
 {
 	if ((task_pid_nr(current) > 1) && !show_unhandled_signals)
 		return;
@@ -228,11 +233,10 @@ static inline void report_user_fault(struct pt_regs *regs, long signr)
 		return;
 	printk(KERN_ALERT "User process fault: interruption code %04x ilc:%d ",
 	       regs->int_code & 0xffff, regs->int_code >> 17);
-	print_vma_addr(KERN_CONT "in ", regs->psw.addr & PSW_ADDR_INSN);
+	print_vma_addr(KERN_CONT "in ", regs->psw.addr);
 	printk(KERN_CONT "\n");
-	printk(KERN_ALERT "failing address: %016lx TEID: %016lx\n",
-	       regs->int_parm_long & __FAIL_ADDR_MASK, regs->int_parm_long);
-	dump_fault_info(regs);
+	if (is_mm_fault)
+		dump_fault_info(regs);
 	show_regs(regs);
 }
 
@@ -244,7 +248,7 @@ static noinline void do_sigsegv(struct pt_regs *regs, int si_code)
 {
 	struct siginfo si;
 
-	report_user_fault(regs, SIGSEGV);
+	report_user_fault(regs, SIGSEGV, 1);
 	si.si_signo = SIGSEGV;
 	si.si_code = si_code;
 	si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK);
@@ -254,12 +258,11 @@ static noinline void do_sigsegv(struct pt_regs *regs, int si_code)
 static noinline void do_no_context(struct pt_regs *regs)
 {
 	const struct exception_table_entry *fixup;
-	unsigned long address;
 
 	/* Are we prepared to handle this kernel fault?  */
-	fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
+	fixup = search_exception_tables(regs->psw.addr);
 	if (fixup) {
-		regs->psw.addr = extable_fixup(fixup) | PSW_ADDR_AMODE;
+		regs->psw.addr = extable_fixup(fixup);
 		return;
 	}
 
@@ -267,15 +270,12 @@ static noinline void do_no_context(struct pt_regs *regs)
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice.
 	 */
-	address = regs->int_parm_long & __FAIL_ADDR_MASK;
 	if (!user_space_fault(regs))
 		printk(KERN_ALERT "Unable to handle kernel pointer dereference"
 		       " in virtual kernel address space\n");
 	else
 		printk(KERN_ALERT "Unable to handle kernel paging request"
 		       " in virtual user address space\n");
-	printk(KERN_ALERT "failing address: %016lx TEID: %016lx\n",
-	       regs->int_parm_long & __FAIL_ADDR_MASK, regs->int_parm_long);
 	dump_fault_info(regs);
 	die(regs, "Oops");
 	do_exit(SIGKILL);
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
new file mode 100644
index 000000000000..cace818d86eb
--- /dev/null
+++ b/arch/s390/mm/gmap.c
@@ -0,0 +1,774 @@
+/*
+ *  KVM guest address space mapping code
+ *
+ *    Copyright IBM Corp. 2007, 2016
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/swapops.h>
+#include <linux/ksm.h>
+#include <linux/mman.h>
+
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/gmap.h>
+#include <asm/tlb.h>
+
+/**
+ * gmap_alloc - allocate a guest address space
+ * @mm: pointer to the parent mm_struct
+ * @limit: maximum address of the gmap address space
+ *
+ * Returns a guest address space structure.
+ */
+struct gmap *gmap_alloc(struct mm_struct *mm, unsigned long limit)
+{
+	struct gmap *gmap;
+	struct page *page;
+	unsigned long *table;
+	unsigned long etype, atype;
+
+	if (limit < (1UL << 31)) {
+		limit = (1UL << 31) - 1;
+		atype = _ASCE_TYPE_SEGMENT;
+		etype = _SEGMENT_ENTRY_EMPTY;
+	} else if (limit < (1UL << 42)) {
+		limit = (1UL << 42) - 1;
+		atype = _ASCE_TYPE_REGION3;
+		etype = _REGION3_ENTRY_EMPTY;
+	} else if (limit < (1UL << 53)) {
+		limit = (1UL << 53) - 1;
+		atype = _ASCE_TYPE_REGION2;
+		etype = _REGION2_ENTRY_EMPTY;
+	} else {
+		limit = -1UL;
+		atype = _ASCE_TYPE_REGION1;
+		etype = _REGION1_ENTRY_EMPTY;
+	}
+	gmap = kzalloc(sizeof(struct gmap), GFP_KERNEL);
+	if (!gmap)
+		goto out;
+	INIT_LIST_HEAD(&gmap->crst_list);
+	INIT_RADIX_TREE(&gmap->guest_to_host, GFP_KERNEL);
+	INIT_RADIX_TREE(&gmap->host_to_guest, GFP_ATOMIC);
+	spin_lock_init(&gmap->guest_table_lock);
+	gmap->mm = mm;
+	page = alloc_pages(GFP_KERNEL, 2);
+	if (!page)
+		goto out_free;
+	page->index = 0;
+	list_add(&page->lru, &gmap->crst_list);
+	table = (unsigned long *) page_to_phys(page);
+	crst_table_init(table, etype);
+	gmap->table = table;
+	gmap->asce = atype | _ASCE_TABLE_LENGTH |
+		_ASCE_USER_BITS | __pa(table);
+	gmap->asce_end = limit;
+	down_write(&mm->mmap_sem);
+	list_add(&gmap->list, &mm->context.gmap_list);
+	up_write(&mm->mmap_sem);
+	return gmap;
+
+out_free:
+	kfree(gmap);
+out:
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(gmap_alloc);
+
+static void gmap_flush_tlb(struct gmap *gmap)
+{
+	if (MACHINE_HAS_IDTE)
+		__tlb_flush_asce(gmap->mm, gmap->asce);
+	else
+		__tlb_flush_global();
+}
+
+static void gmap_radix_tree_free(struct radix_tree_root *root)
+{
+	struct radix_tree_iter iter;
+	unsigned long indices[16];
+	unsigned long index;
+	void **slot;
+	int i, nr;
+
+	/* A radix tree is freed by deleting all of its entries */
+	index = 0;
+	do {
+		nr = 0;
+		radix_tree_for_each_slot(slot, root, &iter, index) {
+			indices[nr] = iter.index;
+			if (++nr == 16)
+				break;
+		}
+		for (i = 0; i < nr; i++) {
+			index = indices[i];
+			radix_tree_delete(root, index);
+		}
+	} while (nr > 0);
+}
+
+/**
+ * gmap_free - free a guest address space
+ * @gmap: pointer to the guest address space structure
+ */
+void gmap_free(struct gmap *gmap)
+{
+	struct page *page, *next;
+
+	/* Flush tlb. */
+	if (MACHINE_HAS_IDTE)
+		__tlb_flush_asce(gmap->mm, gmap->asce);
+	else
+		__tlb_flush_global();
+
+	/* Free all segment & region tables. */
+	list_for_each_entry_safe(page, next, &gmap->crst_list, lru)
+		__free_pages(page, 2);
+	gmap_radix_tree_free(&gmap->guest_to_host);
+	gmap_radix_tree_free(&gmap->host_to_guest);
+	down_write(&gmap->mm->mmap_sem);
+	list_del(&gmap->list);
+	up_write(&gmap->mm->mmap_sem);
+	kfree(gmap);
+}
+EXPORT_SYMBOL_GPL(gmap_free);
+
+/**
+ * gmap_enable - switch primary space to the guest address space
+ * @gmap: pointer to the guest address space structure
+ */
+void gmap_enable(struct gmap *gmap)
+{
+	S390_lowcore.gmap = (unsigned long) gmap;
+}
+EXPORT_SYMBOL_GPL(gmap_enable);
+
+/**
+ * gmap_disable - switch back to the standard primary address space
+ * @gmap: pointer to the guest address space structure
+ */
+void gmap_disable(struct gmap *gmap)
+{
+	S390_lowcore.gmap = 0UL;
+}
+EXPORT_SYMBOL_GPL(gmap_disable);
+
+/*
+ * gmap_alloc_table is assumed to be called with mmap_sem held
+ */
+static int gmap_alloc_table(struct gmap *gmap, unsigned long *table,
+			    unsigned long init, unsigned long gaddr)
+{
+	struct page *page;
+	unsigned long *new;
+
+	/* since we dont free the gmap table until gmap_free we can unlock */
+	page = alloc_pages(GFP_KERNEL, 2);
+	if (!page)
+		return -ENOMEM;
+	new = (unsigned long *) page_to_phys(page);
+	crst_table_init(new, init);
+	spin_lock(&gmap->mm->page_table_lock);
+	if (*table & _REGION_ENTRY_INVALID) {
+		list_add(&page->lru, &gmap->crst_list);
+		*table = (unsigned long) new | _REGION_ENTRY_LENGTH |
+			(*table & _REGION_ENTRY_TYPE_MASK);
+		page->index = gaddr;
+		page = NULL;
+	}
+	spin_unlock(&gmap->mm->page_table_lock);
+	if (page)
+		__free_pages(page, 2);
+	return 0;
+}
+
+/**
+ * __gmap_segment_gaddr - find virtual address from segment pointer
+ * @entry: pointer to a segment table entry in the guest address space
+ *
+ * Returns the virtual address in the guest address space for the segment
+ */
+static unsigned long __gmap_segment_gaddr(unsigned long *entry)
+{
+	struct page *page;
+	unsigned long offset, mask;
+
+	offset = (unsigned long) entry / sizeof(unsigned long);
+	offset = (offset & (PTRS_PER_PMD - 1)) * PMD_SIZE;
+	mask = ~(PTRS_PER_PMD * sizeof(pmd_t) - 1);
+	page = virt_to_page((void *)((unsigned long) entry & mask));
+	return page->index + offset;
+}
+
+/**
+ * __gmap_unlink_by_vmaddr - unlink a single segment via a host address
+ * @gmap: pointer to the guest address space structure
+ * @vmaddr: address in the host process address space
+ *
+ * Returns 1 if a TLB flush is required
+ */
+static int __gmap_unlink_by_vmaddr(struct gmap *gmap, unsigned long vmaddr)
+{
+	unsigned long *entry;
+	int flush = 0;
+
+	spin_lock(&gmap->guest_table_lock);
+	entry = radix_tree_delete(&gmap->host_to_guest, vmaddr >> PMD_SHIFT);
+	if (entry) {
+		flush = (*entry != _SEGMENT_ENTRY_INVALID);
+		*entry = _SEGMENT_ENTRY_INVALID;
+	}
+	spin_unlock(&gmap->guest_table_lock);
+	return flush;
+}
+
+/**
+ * __gmap_unmap_by_gaddr - unmap a single segment via a guest address
+ * @gmap: pointer to the guest address space structure
+ * @gaddr: address in the guest address space
+ *
+ * Returns 1 if a TLB flush is required
+ */
+static int __gmap_unmap_by_gaddr(struct gmap *gmap, unsigned long gaddr)
+{
+	unsigned long vmaddr;
+
+	vmaddr = (unsigned long) radix_tree_delete(&gmap->guest_to_host,
+						   gaddr >> PMD_SHIFT);
+	return vmaddr ? __gmap_unlink_by_vmaddr(gmap, vmaddr) : 0;
+}
+
+/**
+ * gmap_unmap_segment - unmap segment from the guest address space
+ * @gmap: pointer to the guest address space structure
+ * @to: address in the guest address space
+ * @len: length of the memory area to unmap
+ *
+ * Returns 0 if the unmap succeeded, -EINVAL if not.
+ */
+int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len)
+{
+	unsigned long off;
+	int flush;
+
+	if ((to | len) & (PMD_SIZE - 1))
+		return -EINVAL;
+	if (len == 0 || to + len < to)
+		return -EINVAL;
+
+	flush = 0;
+	down_write(&gmap->mm->mmap_sem);
+	for (off = 0; off < len; off += PMD_SIZE)
+		flush |= __gmap_unmap_by_gaddr(gmap, to + off);
+	up_write(&gmap->mm->mmap_sem);
+	if (flush)
+		gmap_flush_tlb(gmap);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gmap_unmap_segment);
+
+/**
+ * gmap_map_segment - map a segment to the guest address space
+ * @gmap: pointer to the guest address space structure
+ * @from: source address in the parent address space
+ * @to: target address in the guest address space
+ * @len: length of the memory area to map
+ *
+ * Returns 0 if the mmap succeeded, -EINVAL or -ENOMEM if not.
+ */
+int gmap_map_segment(struct gmap *gmap, unsigned long from,
+		     unsigned long to, unsigned long len)
+{
+	unsigned long off;
+	int flush;
+
+	if ((from | to | len) & (PMD_SIZE - 1))
+		return -EINVAL;
+	if (len == 0 || from + len < from || to + len < to ||
+	    from + len - 1 > TASK_MAX_SIZE || to + len - 1 > gmap->asce_end)
+		return -EINVAL;
+
+	flush = 0;
+	down_write(&gmap->mm->mmap_sem);
+	for (off = 0; off < len; off += PMD_SIZE) {
+		/* Remove old translation */
+		flush |= __gmap_unmap_by_gaddr(gmap, to + off);
+		/* Store new translation */
+		if (radix_tree_insert(&gmap->guest_to_host,
+				      (to + off) >> PMD_SHIFT,
+				      (void *) from + off))
+			break;
+	}
+	up_write(&gmap->mm->mmap_sem);
+	if (flush)
+		gmap_flush_tlb(gmap);
+	if (off >= len)
+		return 0;
+	gmap_unmap_segment(gmap, to, len);
+	return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(gmap_map_segment);
+
+/**
+ * __gmap_translate - translate a guest address to a user space address
+ * @gmap: pointer to guest mapping meta data structure
+ * @gaddr: guest address
+ *
+ * Returns user space address which corresponds to the guest address or
+ * -EFAULT if no such mapping exists.
+ * This function does not establish potentially missing page table entries.
+ * The mmap_sem of the mm that belongs to the address space must be held
+ * when this function gets called.
+ */
+unsigned long __gmap_translate(struct gmap *gmap, unsigned long gaddr)
+{
+	unsigned long vmaddr;
+
+	vmaddr = (unsigned long)
+		radix_tree_lookup(&gmap->guest_to_host, gaddr >> PMD_SHIFT);
+	return vmaddr ? (vmaddr | (gaddr & ~PMD_MASK)) : -EFAULT;
+}
+EXPORT_SYMBOL_GPL(__gmap_translate);
+
+/**
+ * gmap_translate - translate a guest address to a user space address
+ * @gmap: pointer to guest mapping meta data structure
+ * @gaddr: guest address
+ *
+ * Returns user space address which corresponds to the guest address or
+ * -EFAULT if no such mapping exists.
+ * This function does not establish potentially missing page table entries.
+ */
+unsigned long gmap_translate(struct gmap *gmap, unsigned long gaddr)
+{
+	unsigned long rc;
+
+	down_read(&gmap->mm->mmap_sem);
+	rc = __gmap_translate(gmap, gaddr);
+	up_read(&gmap->mm->mmap_sem);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(gmap_translate);
+
+/**
+ * gmap_unlink - disconnect a page table from the gmap shadow tables
+ * @gmap: pointer to guest mapping meta data structure
+ * @table: pointer to the host page table
+ * @vmaddr: vm address associated with the host page table
+ */
+void gmap_unlink(struct mm_struct *mm, unsigned long *table,
+		 unsigned long vmaddr)
+{
+	struct gmap *gmap;
+	int flush;
+
+	list_for_each_entry(gmap, &mm->context.gmap_list, list) {
+		flush = __gmap_unlink_by_vmaddr(gmap, vmaddr);
+		if (flush)
+			gmap_flush_tlb(gmap);
+	}
+}
+
+/**
+ * gmap_link - set up shadow page tables to connect a host to a guest address
+ * @gmap: pointer to guest mapping meta data structure
+ * @gaddr: guest address
+ * @vmaddr: vm address
+ *
+ * Returns 0 on success, -ENOMEM for out of memory conditions, and -EFAULT
+ * if the vm address is already mapped to a different guest segment.
+ * The mmap_sem of the mm that belongs to the address space must be held
+ * when this function gets called.
+ */
+int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr)
+{
+	struct mm_struct *mm;
+	unsigned long *table;
+	spinlock_t *ptl;
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	int rc;
+
+	/* Create higher level tables in the gmap page table */
+	table = gmap->table;
+	if ((gmap->asce & _ASCE_TYPE_MASK) >= _ASCE_TYPE_REGION1) {
+		table += (gaddr >> 53) & 0x7ff;
+		if ((*table & _REGION_ENTRY_INVALID) &&
+		    gmap_alloc_table(gmap, table, _REGION2_ENTRY_EMPTY,
+				     gaddr & 0xffe0000000000000UL))
+			return -ENOMEM;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	}
+	if ((gmap->asce & _ASCE_TYPE_MASK) >= _ASCE_TYPE_REGION2) {
+		table += (gaddr >> 42) & 0x7ff;
+		if ((*table & _REGION_ENTRY_INVALID) &&
+		    gmap_alloc_table(gmap, table, _REGION3_ENTRY_EMPTY,
+				     gaddr & 0xfffffc0000000000UL))
+			return -ENOMEM;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	}
+	if ((gmap->asce & _ASCE_TYPE_MASK) >= _ASCE_TYPE_REGION3) {
+		table += (gaddr >> 31) & 0x7ff;
+		if ((*table & _REGION_ENTRY_INVALID) &&
+		    gmap_alloc_table(gmap, table, _SEGMENT_ENTRY_EMPTY,
+				     gaddr & 0xffffffff80000000UL))
+			return -ENOMEM;
+		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
+	}
+	table += (gaddr >> 20) & 0x7ff;
+	/* Walk the parent mm page table */
+	mm = gmap->mm;
+	pgd = pgd_offset(mm, vmaddr);
+	VM_BUG_ON(pgd_none(*pgd));
+	pud = pud_offset(pgd, vmaddr);
+	VM_BUG_ON(pud_none(*pud));
+	pmd = pmd_offset(pud, vmaddr);
+	VM_BUG_ON(pmd_none(*pmd));
+	/* large pmds cannot yet be handled */
+	if (pmd_large(*pmd))
+		return -EFAULT;
+	/* Link gmap segment table entry location to page table. */
+	rc = radix_tree_preload(GFP_KERNEL);
+	if (rc)
+		return rc;
+	ptl = pmd_lock(mm, pmd);
+	spin_lock(&gmap->guest_table_lock);
+	if (*table == _SEGMENT_ENTRY_INVALID) {
+		rc = radix_tree_insert(&gmap->host_to_guest,
+				       vmaddr >> PMD_SHIFT, table);
+		if (!rc)
+			*table = pmd_val(*pmd);
+	} else
+		rc = 0;
+	spin_unlock(&gmap->guest_table_lock);
+	spin_unlock(ptl);
+	radix_tree_preload_end();
+	return rc;
+}
+
+/**
+ * gmap_fault - resolve a fault on a guest address
+ * @gmap: pointer to guest mapping meta data structure
+ * @gaddr: guest address
+ * @fault_flags: flags to pass down to handle_mm_fault()
+ *
+ * Returns 0 on success, -ENOMEM for out of memory conditions, and -EFAULT
+ * if the vm address is already mapped to a different guest segment.
+ */
+int gmap_fault(struct gmap *gmap, unsigned long gaddr,
+	       unsigned int fault_flags)
+{
+	unsigned long vmaddr;
+	int rc;
+	bool unlocked;
+
+	down_read(&gmap->mm->mmap_sem);
+
+retry:
+	unlocked = false;
+	vmaddr = __gmap_translate(gmap, gaddr);
+	if (IS_ERR_VALUE(vmaddr)) {
+		rc = vmaddr;
+		goto out_up;
+	}
+	if (fixup_user_fault(current, gmap->mm, vmaddr, fault_flags,
+			     &unlocked)) {
+		rc = -EFAULT;
+		goto out_up;
+	}
+	/*
+	 * In the case that fixup_user_fault unlocked the mmap_sem during
+	 * faultin redo __gmap_translate to not race with a map/unmap_segment.
+	 */
+	if (unlocked)
+		goto retry;
+
+	rc = __gmap_link(gmap, gaddr, vmaddr);
+out_up:
+	up_read(&gmap->mm->mmap_sem);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(gmap_fault);
+
+/*
+ * this function is assumed to be called with mmap_sem held
+ */
+void __gmap_zap(struct gmap *gmap, unsigned long gaddr)
+{
+	unsigned long vmaddr;
+	spinlock_t *ptl;
+	pte_t *ptep;
+
+	/* Find the vm address for the guest address */
+	vmaddr = (unsigned long) radix_tree_lookup(&gmap->guest_to_host,
+						   gaddr >> PMD_SHIFT);
+	if (vmaddr) {
+		vmaddr |= gaddr & ~PMD_MASK;
+		/* Get pointer to the page table entry */
+		ptep = get_locked_pte(gmap->mm, vmaddr, &ptl);
+		if (likely(ptep))
+			ptep_zap_unused(gmap->mm, vmaddr, ptep, 0);
+		pte_unmap_unlock(ptep, ptl);
+	}
+}
+EXPORT_SYMBOL_GPL(__gmap_zap);
+
+void gmap_discard(struct gmap *gmap, unsigned long from, unsigned long to)
+{
+	unsigned long gaddr, vmaddr, size;
+	struct vm_area_struct *vma;
+
+	down_read(&gmap->mm->mmap_sem);
+	for (gaddr = from; gaddr < to;
+	     gaddr = (gaddr + PMD_SIZE) & PMD_MASK) {
+		/* Find the vm address for the guest address */
+		vmaddr = (unsigned long)
+			radix_tree_lookup(&gmap->guest_to_host,
+					  gaddr >> PMD_SHIFT);
+		if (!vmaddr)
+			continue;
+		vmaddr |= gaddr & ~PMD_MASK;
+		/* Find vma in the parent mm */
+		vma = find_vma(gmap->mm, vmaddr);
+		size = min(to - gaddr, PMD_SIZE - (gaddr & ~PMD_MASK));
+		zap_page_range(vma, vmaddr, size, NULL);
+	}
+	up_read(&gmap->mm->mmap_sem);
+}
+EXPORT_SYMBOL_GPL(gmap_discard);
+
+static LIST_HEAD(gmap_notifier_list);
+static DEFINE_SPINLOCK(gmap_notifier_lock);
+
+/**
+ * gmap_register_ipte_notifier - register a pte invalidation callback
+ * @nb: pointer to the gmap notifier block
+ */
+void gmap_register_ipte_notifier(struct gmap_notifier *nb)
+{
+	spin_lock(&gmap_notifier_lock);
+	list_add(&nb->list, &gmap_notifier_list);
+	spin_unlock(&gmap_notifier_lock);
+}
+EXPORT_SYMBOL_GPL(gmap_register_ipte_notifier);
+
+/**
+ * gmap_unregister_ipte_notifier - remove a pte invalidation callback
+ * @nb: pointer to the gmap notifier block
+ */
+void gmap_unregister_ipte_notifier(struct gmap_notifier *nb)
+{
+	spin_lock(&gmap_notifier_lock);
+	list_del_init(&nb->list);
+	spin_unlock(&gmap_notifier_lock);
+}
+EXPORT_SYMBOL_GPL(gmap_unregister_ipte_notifier);
+
+/**
+ * gmap_ipte_notify - mark a range of ptes for invalidation notification
+ * @gmap: pointer to guest mapping meta data structure
+ * @gaddr: virtual address in the guest address space
+ * @len: size of area
+ *
+ * Returns 0 if for each page in the given range a gmap mapping exists and
+ * the invalidation notification could be set. If the gmap mapping is missing
+ * for one or more pages -EFAULT is returned. If no memory could be allocated
+ * -ENOMEM is returned. This function establishes missing page table entries.
+ */
+int gmap_ipte_notify(struct gmap *gmap, unsigned long gaddr, unsigned long len)
+{
+	unsigned long addr;
+	spinlock_t *ptl;
+	pte_t *ptep;
+	bool unlocked;
+	int rc = 0;
+
+	if ((gaddr & ~PAGE_MASK) || (len & ~PAGE_MASK))
+		return -EINVAL;
+	down_read(&gmap->mm->mmap_sem);
+	while (len) {
+		unlocked = false;
+		/* Convert gmap address and connect the page tables */
+		addr = __gmap_translate(gmap, gaddr);
+		if (IS_ERR_VALUE(addr)) {
+			rc = addr;
+			break;
+		}
+		/* Get the page mapped */
+		if (fixup_user_fault(current, gmap->mm, addr, FAULT_FLAG_WRITE,
+				     &unlocked)) {
+			rc = -EFAULT;
+			break;
+		}
+		/* While trying to map mmap_sem got unlocked. Let us retry */
+		if (unlocked)
+			continue;
+		rc = __gmap_link(gmap, gaddr, addr);
+		if (rc)
+			break;
+		/* Walk the process page table, lock and get pte pointer */
+		ptep = get_locked_pte(gmap->mm, addr, &ptl);
+		VM_BUG_ON(!ptep);
+		/* Set notification bit in the pgste of the pte */
+		if ((pte_val(*ptep) & (_PAGE_INVALID | _PAGE_PROTECT)) == 0) {
+			ptep_set_notify(gmap->mm, addr, ptep);
+			gaddr += PAGE_SIZE;
+			len -= PAGE_SIZE;
+		}
+		pte_unmap_unlock(ptep, ptl);
+	}
+	up_read(&gmap->mm->mmap_sem);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(gmap_ipte_notify);
+
+/**
+ * ptep_notify - call all invalidation callbacks for a specific pte.
+ * @mm: pointer to the process mm_struct
+ * @addr: virtual address in the process address space
+ * @pte: pointer to the page table entry
+ *
+ * This function is assumed to be called with the page table lock held
+ * for the pte to notify.
+ */
+void ptep_notify(struct mm_struct *mm, unsigned long vmaddr, pte_t *pte)
+{
+	unsigned long offset, gaddr;
+	unsigned long *table;
+	struct gmap_notifier *nb;
+	struct gmap *gmap;
+
+	offset = ((unsigned long) pte) & (255 * sizeof(pte_t));
+	offset = offset * (4096 / sizeof(pte_t));
+	spin_lock(&gmap_notifier_lock);
+	list_for_each_entry(gmap, &mm->context.gmap_list, list) {
+		table = radix_tree_lookup(&gmap->host_to_guest,
+					  vmaddr >> PMD_SHIFT);
+		if (!table)
+			continue;
+		gaddr = __gmap_segment_gaddr(table) + offset;
+		list_for_each_entry(nb, &gmap_notifier_list, list)
+			nb->notifier_call(gmap, gaddr);
+	}
+	spin_unlock(&gmap_notifier_lock);
+}
+EXPORT_SYMBOL_GPL(ptep_notify);
+
+static inline void thp_split_mm(struct mm_struct *mm)
+{
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	struct vm_area_struct *vma;
+	unsigned long addr;
+
+	for (vma = mm->mmap; vma != NULL; vma = vma->vm_next) {
+		for (addr = vma->vm_start;
+		     addr < vma->vm_end;
+		     addr += PAGE_SIZE)
+			follow_page(vma, addr, FOLL_SPLIT);
+		vma->vm_flags &= ~VM_HUGEPAGE;
+		vma->vm_flags |= VM_NOHUGEPAGE;
+	}
+	mm->def_flags |= VM_NOHUGEPAGE;
+#endif
+}
+
+/*
+ * switch on pgstes for its userspace process (for kvm)
+ */
+int s390_enable_sie(void)
+{
+	struct mm_struct *mm = current->mm;
+
+	/* Do we have pgstes? if yes, we are done */
+	if (mm_has_pgste(mm))
+		return 0;
+	/* Fail if the page tables are 2K */
+	if (!mm_alloc_pgste(mm))
+		return -EINVAL;
+	down_write(&mm->mmap_sem);
+	mm->context.has_pgste = 1;
+	/* split thp mappings and disable thp for future mappings */
+	thp_split_mm(mm);
+	up_write(&mm->mmap_sem);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(s390_enable_sie);
+
+/*
+ * Enable storage key handling from now on and initialize the storage
+ * keys with the default key.
+ */
+static int __s390_enable_skey(pte_t *pte, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	/*
+	 * Remove all zero page mappings,
+	 * after establishing a policy to forbid zero page mappings
+	 * following faults for that page will get fresh anonymous pages
+	 */
+	if (is_zero_pfn(pte_pfn(*pte)))
+		ptep_xchg_direct(walk->mm, addr, pte, __pte(_PAGE_INVALID));
+	/* Clear storage key */
+	ptep_zap_key(walk->mm, addr, pte);
+	return 0;
+}
+
+int s390_enable_skey(void)
+{
+	struct mm_walk walk = { .pte_entry = __s390_enable_skey };
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	int rc = 0;
+
+	down_write(&mm->mmap_sem);
+	if (mm_use_skey(mm))
+		goto out_up;
+
+	mm->context.use_skey = 1;
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		if (ksm_madvise(vma, vma->vm_start, vma->vm_end,
+				MADV_UNMERGEABLE, &vma->vm_flags)) {
+			mm->context.use_skey = 0;
+			rc = -ENOMEM;
+			goto out_up;
+		}
+	}
+	mm->def_flags &= ~VM_MERGEABLE;
+
+	walk.mm = mm;
+	walk_page_range(0, TASK_SIZE, &walk);
+
+out_up:
+	up_write(&mm->mmap_sem);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(s390_enable_skey);
+
+/*
+ * Reset CMMA state, make all pages stable again.
+ */
+static int __s390_reset_cmma(pte_t *pte, unsigned long addr,
+			     unsigned long next, struct mm_walk *walk)
+{
+	ptep_zap_unused(walk->mm, addr, pte, 1);
+	return 0;
+}
+
+void s390_reset_cmma(struct mm_struct *mm)
+{
+	struct mm_walk walk = { .pte_entry = __s390_reset_cmma };
+
+	down_write(&mm->mmap_sem);
+	walk.mm = mm;
+	walk_page_range(0, TASK_SIZE, &walk);
+	up_write(&mm->mmap_sem);
+}
+EXPORT_SYMBOL_GPL(s390_reset_cmma);
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 12bbf0e8478f..a8a6765f1a51 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -20,9 +20,9 @@
 static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
+	struct page *head, *page;
 	unsigned long mask;
 	pte_t *ptep, pte;
-	struct page *page;
 
 	mask = (write ? _PAGE_PROTECT : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
 
@@ -37,12 +37,14 @@ static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 			return 0;
 		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 		page = pte_page(pte);
-		if (!page_cache_get_speculative(page))
+		head = compound_head(page);
+		if (!page_cache_get_speculative(head))
 			return 0;
 		if (unlikely(pte_val(pte) != pte_val(*ptep))) {
-			put_page(page);
+			put_page(head);
 			return 0;
 		}
+		VM_BUG_ON_PAGE(compound_head(page) != head, page);
 		pages[*nr] = page;
 		(*nr)++;
 
@@ -55,7 +57,7 @@ static inline int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
 	unsigned long mask, result;
-	struct page *head, *page, *tail;
+	struct page *head, *page;
 	int refs;
 
 	result = write ? 0 : _SEGMENT_ENTRY_PROTECT;
@@ -67,7 +69,6 @@ static inline int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 	refs = 0;
 	head = pmd_page(pmd);
 	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
-	tail = page;
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
@@ -88,16 +89,6 @@ static inline int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 		return 0;
 	}
 
-	/*
-	 * Any tail page need their mapcount reference taken before we
-	 * return.
-	 */
-	while (refs--) {
-		if (PageTail(tail))
-			get_huge_page_tail(tail);
-		tail++;
-	}
-
 	return 1;
 }
 
@@ -116,16 +107,7 @@ static inline int gup_pmd_range(pud_t *pudp, pud_t pud, unsigned long addr,
 		pmd = *pmdp;
 		barrier();
 		next = pmd_addr_end(addr, end);
-		/*
-		 * The pmd_trans_splitting() check below explains why
-		 * pmdp_splitting_flush() has to serialize with
-		 * smp_call_function() against our disabled IRQs, to stop
-		 * this gup-fast code from running while we set the
-		 * splitting bit in the pmd. Returning zero will take
-		 * the slow path that will call wait_split_huge_page()
-		 * if the pmd is still in splitting state.
-		 */
-		if (pmd_none(pmd) || pmd_trans_splitting(pmd))
+		if (pmd_none(pmd))
 			return 0;
 		if (unlikely(pmd_large(pmd))) {
 			/*
@@ -230,9 +212,9 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
 int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 			struct page **pages)
 {
-	struct mm_struct *mm = current->mm;
 	int nr, ret;
 
+	might_sleep();
 	start &= PAGE_MASK;
 	nr = __get_user_pages_fast(start, nr_pages, write, pages);
 	if (nr == nr_pages)
@@ -241,8 +223,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	/* Try to get the remaining pages with get_user_pages */
 	start += nr << PAGE_SHIFT;
 	pages += nr;
-	ret = get_user_pages_unlocked(current, mm, start,
-			     nr_pages - nr, write, 0, pages);
+	ret = get_user_pages_unlocked(start, nr_pages - nr, write, 0, pages);
 	/* Have to be a bit careful with return values */
 	if (nr > 0)
 		ret = (ret < 0) ? nr : ret + nr;
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index f81096b6940d..1b5e8983f4f3 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -105,11 +105,10 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 			      unsigned long addr, pte_t *ptep)
 {
 	pmd_t *pmdp = (pmd_t *) ptep;
-	pte_t pte = huge_ptep_get(ptep);
+	pmd_t old;
 
-	pmdp_flush_direct(mm, addr, pmdp);
-	pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY;
-	return pte;
+	old = pmdp_xchg_direct(mm, addr, pmdp, __pmd(_SEGMENT_ENTRY_EMPTY));
+	return __pmd_to_pte(old);
 }
 
 pte_t *huge_pte_alloc(struct mm_struct *mm,
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index c3c07d3505ba..c7b0451397d6 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -48,37 +48,13 @@ EXPORT_SYMBOL(zero_page_mask);
 
 static void __init setup_zero_pages(void)
 {
-	struct cpuid cpu_id;
 	unsigned int order;
 	struct page *page;
 	int i;
 
-	get_cpu_id(&cpu_id);
-	switch (cpu_id.machine) {
-	case 0x9672:	/* g5 */
-	case 0x2064:	/* z900 */
-	case 0x2066:	/* z900 */
-	case 0x2084:	/* z990 */
-	case 0x2086:	/* z990 */
-	case 0x2094:	/* z9-109 */
-	case 0x2096:	/* z9-109 */
-		order = 0;
-		break;
-	case 0x2097:	/* z10 */
-	case 0x2098:	/* z10 */
-	case 0x2817:	/* z196 */
-	case 0x2818:	/* z196 */
-		order = 2;
-		break;
-	case 0x2827:	/* zEC12 */
-	case 0x2828:	/* zEC12 */
-		order = 5;
-		break;
-	case 0x2964:	/* z13 */
-	default:
-		order = 7;
-		break;
-	}
+	/* Latest machines require a mapping granularity of 512KB */
+	order = 7;
+
 	/* Limit number of empty zero pages for small memory sizes */
 	while (order > 2 && (totalram_pages >> 10) < (1UL << order))
 		order--;
@@ -122,7 +98,7 @@ void __init paging_init(void)
 	__ctl_load(S390_lowcore.kernel_asce, 1, 1);
 	__ctl_load(S390_lowcore.kernel_asce, 7, 7);
 	__ctl_load(S390_lowcore.kernel_asce, 13, 13);
-	arch_local_irq_restore(4UL << (BITS_PER_LONG - 8));
+	__arch_local_irq_stosm(0x04);
 
 	sparse_memory_present_with_active_regions(MAX_NUMNODES);
 	sparse_init();
@@ -132,6 +108,13 @@ void __init paging_init(void)
 	free_area_init_nodes(max_zone_pfns);
 }
 
+void mark_rodata_ro(void)
+{
+	/* Text and rodata are already protected. Nothing to do here. */
+	pr_info("Write protecting the kernel read-only data: %luk\n",
+		((unsigned long)&_eshared - (unsigned long)&_stext) >> 10);
+}
+
 void __init mem_init(void)
 {
 	if (MACHINE_HAS_TLB_LC)
@@ -150,9 +133,6 @@ void __init mem_init(void)
 	setup_zero_pages();	/* Setup zeroed pages. */
 
 	mem_init_print_info(NULL);
-	printk("Write protected kernel read-only data: %#lx - %#lx\n",
-	       (unsigned long)&_stext,
-	       PFN_ALIGN((unsigned long)&_eshared) - 1);
 }
 
 void free_initmem(void)
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 8a993a53fcd6..792f9c63fbca 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -93,15 +93,19 @@ static int __memcpy_real(void *dest, void *src, size_t count)
  */
 int memcpy_real(void *dest, void *src, size_t count)
 {
+	int irqs_disabled, rc;
 	unsigned long flags;
-	int rc;
 
 	if (!count)
 		return 0;
-	local_irq_save(flags);
-	__arch_local_irq_stnsm(0xfbUL);
+	flags = __arch_local_irq_stnsm(0xf8UL);
+	irqs_disabled = arch_irqs_disabled_flags(flags);
+	if (!irqs_disabled)
+		trace_hardirqs_off();
 	rc = __memcpy_real(dest, src, count);
-	local_irq_restore(flags);
+	if (!irqs_disabled)
+		trace_hardirqs_on();
+	__arch_local_irq_ssm(flags);
 	return rc;
 }
 
@@ -163,11 +167,11 @@ static int is_swapped(unsigned long addr)
 	unsigned long lc;
 	int cpu;
 
-	if (addr < sizeof(struct _lowcore))
+	if (addr < sizeof(struct lowcore))
 		return 1;
 	for_each_online_cpu(cpu) {
 		lc = (unsigned long) lowcore_ptr[cpu];
-		if (addr > lc + sizeof(struct _lowcore) - 1 || addr < lc)
+		if (addr > lc + sizeof(struct lowcore) - 1 || addr < lc)
 			continue;
 		return 1;
 	}
diff --git a/arch/s390/mm/mem_detect.c b/arch/s390/mm/mem_detect.c
index e00f0d5d296d..d612cc3eec6a 100644
--- a/arch/s390/mm/mem_detect.c
+++ b/arch/s390/mm/mem_detect.c
@@ -14,8 +14,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-#define ADDR2G (1ULL << 31)
-
 #define CHUNK_READ_WRITE 0
 #define CHUNK_READ_ONLY  1
 
@@ -27,15 +25,14 @@ static inline void memblock_physmem_add(phys_addr_t start, phys_addr_t size)
 
 void __init detect_memory_memblock(void)
 {
-	unsigned long long memsize, rnmax, rzm;
-	unsigned long addr, size;
+	unsigned long memsize, rnmax, rzm, addr, size;
 	int type;
 
 	rzm = sclp.rzm;
 	rnmax = sclp.rnmax;
 	memsize = rzm * rnmax;
 	if (!rzm)
-		rzm = 1ULL << 17;
+		rzm = 1UL << 17;
 	max_physmem_end = memsize;
 	addr = 0;
 	/* keep memblock lists close to the kernel */
diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c
index 6e552af08c76..45c4daa49930 100644
--- a/arch/s390/mm/mmap.c
+++ b/arch/s390/mm/mmap.c
@@ -31,9 +31,6 @@
 #include <linux/security.h>
 #include <asm/pgalloc.h>
 
-unsigned long mmap_rnd_mask;
-static unsigned long mmap_align_mask;
-
 static unsigned long stack_maxrandom_size(void)
 {
 	if (!(current->flags & PF_RANDOMIZE))
@@ -62,10 +59,7 @@ static inline int mmap_is_legacy(void)
 
 unsigned long arch_mmap_rnd(void)
 {
-	if (is_32bit_task())
-		return (get_random_int() & 0x7ff) << PAGE_SHIFT;
-	else
-		return (get_random_int() & mmap_rnd_mask) << PAGE_SHIFT;
+	return (get_random_int() & MMAP_RND_MASK) << PAGE_SHIFT;
 }
 
 static unsigned long mmap_base_legacy(unsigned long rnd)
@@ -92,7 +86,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	struct vm_unmapped_area_info info;
-	int do_color_align;
 
 	if (len > TASK_SIZE - mmap_min_addr)
 		return -ENOMEM;
@@ -108,15 +101,14 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 			return addr;
 	}
 
-	do_color_align = 0;
-	if (filp || (flags & MAP_SHARED))
-		do_color_align = !is_32bit_task();
-
 	info.flags = 0;
 	info.length = len;
 	info.low_limit = mm->mmap_base;
 	info.high_limit = TASK_SIZE;
-	info.align_mask = do_color_align ? (mmap_align_mask << PAGE_SHIFT) : 0;
+	if (filp || (flags & MAP_SHARED))
+		info.align_mask = MMAP_ALIGN_MASK << PAGE_SHIFT;
+	else
+		info.align_mask = 0;
 	info.align_offset = pgoff << PAGE_SHIFT;
 	return vm_unmapped_area(&info);
 }
@@ -130,7 +122,6 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 	struct mm_struct *mm = current->mm;
 	unsigned long addr = addr0;
 	struct vm_unmapped_area_info info;
-	int do_color_align;
 
 	/* requested length too big for entire address space */
 	if (len > TASK_SIZE - mmap_min_addr)
@@ -148,15 +139,14 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 			return addr;
 	}
 
-	do_color_align = 0;
-	if (filp || (flags & MAP_SHARED))
-		do_color_align = !is_32bit_task();
-
 	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
 	info.length = len;
 	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
 	info.high_limit = mm->mmap_base;
-	info.align_mask = do_color_align ? (mmap_align_mask << PAGE_SHIFT) : 0;
+	if (filp || (flags & MAP_SHARED))
+		info.align_mask = MMAP_ALIGN_MASK << PAGE_SHIFT;
+	else
+		info.align_mask = 0;
 	info.align_offset = pgoff << PAGE_SHIFT;
 	addr = vm_unmapped_area(&info);
 
@@ -179,12 +169,12 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 
 int s390_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
 {
-	if (is_compat_task() || (TASK_SIZE >= (1UL << 53)))
+	if (is_compat_task() || TASK_SIZE >= TASK_MAX_SIZE)
 		return 0;
 	if (!(flags & MAP_FIXED))
 		addr = 0;
 	if ((addr + len) >= TASK_SIZE)
-		return crst_table_upgrade(current->mm, 1UL << 53);
+		return crst_table_upgrade(current->mm, TASK_MAX_SIZE);
 	return 0;
 }
 
@@ -199,9 +189,9 @@ s390_get_unmapped_area(struct file *filp, unsigned long addr,
 	area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
 	if (!(area & ~PAGE_MASK))
 		return area;
-	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < (1UL << 53)) {
+	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) {
 		/* Upgrade the page table to 4 levels and retry. */
-		rc = crst_table_upgrade(mm, 1UL << 53);
+		rc = crst_table_upgrade(mm, TASK_MAX_SIZE);
 		if (rc)
 			return (unsigned long) rc;
 		area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
@@ -221,9 +211,9 @@ s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
 	area = arch_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
 	if (!(area & ~PAGE_MASK))
 		return area;
-	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < (1UL << 53)) {
+	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) {
 		/* Upgrade the page table to 4 levels and retry. */
-		rc = crst_table_upgrade(mm, 1UL << 53);
+		rc = crst_table_upgrade(mm, TASK_MAX_SIZE);
 		if (rc)
 			return (unsigned long) rc;
 		area = arch_get_unmapped_area_topdown(filp, addr, len,
@@ -254,35 +244,3 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 		mm->get_unmapped_area = s390_get_unmapped_area_topdown;
 	}
 }
-
-static int __init setup_mmap_rnd(void)
-{
-	struct cpuid cpu_id;
-
-	get_cpu_id(&cpu_id);
-	switch (cpu_id.machine) {
-	case 0x9672:
-	case 0x2064:
-	case 0x2066:
-	case 0x2084:
-	case 0x2086:
-	case 0x2094:
-	case 0x2096:
-	case 0x2097:
-	case 0x2098:
-	case 0x2817:
-	case 0x2818:
-	case 0x2827:
-	case 0x2828:
-		mmap_rnd_mask = 0x7ffUL;
-		mmap_align_mask = 0UL;
-		break;
-	case 0x2964:	/* z13 */
-	default:
-		mmap_rnd_mask = 0x3ff80UL;
-		mmap_align_mask = 0x7fUL;
-		break;
-	}
-	return 0;
-}
-early_initcall(setup_mmap_rnd);
diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c
index 749c98407b41..f2a5c29a97e9 100644
--- a/arch/s390/mm/pageattr.c
+++ b/arch/s390/mm/pageattr.c
@@ -65,19 +65,17 @@ static pte_t *walk_page_table(unsigned long addr)
 static void change_page_attr(unsigned long addr, int numpages,
 			     pte_t (*set) (pte_t))
 {
-	pte_t *ptep, pte;
+	pte_t *ptep;
 	int i;
 
 	for (i = 0; i < numpages; i++) {
 		ptep = walk_page_table(addr);
 		if (WARN_ON_ONCE(!ptep))
 			break;
-		pte = *ptep;
-		pte = set(pte);
-		__ptep_ipte(addr, ptep);
-		*ptep = pte;
+		*ptep = set(*ptep);
 		addr += PAGE_SIZE;
 	}
+	__tlb_flush_kernel();
 }
 
 int set_memory_ro(unsigned long addr, int numpages)
diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c
new file mode 100644
index 000000000000..f6c3de26cda8
--- /dev/null
+++ b/arch/s390/mm/pgalloc.c
@@ -0,0 +1,360 @@
+/*
+ *  Page table allocation functions
+ *
+ *    Copyright IBM Corp. 2016
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/sysctl.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+#include <asm/gmap.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_PGSTE
+
+static int page_table_allocate_pgste_min = 0;
+static int page_table_allocate_pgste_max = 1;
+int page_table_allocate_pgste = 0;
+EXPORT_SYMBOL(page_table_allocate_pgste);
+
+static struct ctl_table page_table_sysctl[] = {
+	{
+		.procname	= "allocate_pgste",
+		.data		= &page_table_allocate_pgste,
+		.maxlen		= sizeof(int),
+		.mode		= S_IRUGO | S_IWUSR,
+		.proc_handler	= proc_dointvec,
+		.extra1		= &page_table_allocate_pgste_min,
+		.extra2		= &page_table_allocate_pgste_max,
+	},
+	{ }
+};
+
+static struct ctl_table page_table_sysctl_dir[] = {
+	{
+		.procname	= "vm",
+		.maxlen		= 0,
+		.mode		= 0555,
+		.child		= page_table_sysctl,
+	},
+	{ }
+};
+
+static int __init page_table_register_sysctl(void)
+{
+	return register_sysctl_table(page_table_sysctl_dir) ? 0 : -ENOMEM;
+}
+__initcall(page_table_register_sysctl);
+
+#endif /* CONFIG_PGSTE */
+
+unsigned long *crst_table_alloc(struct mm_struct *mm)
+{
+	struct page *page = alloc_pages(GFP_KERNEL, 2);
+
+	if (!page)
+		return NULL;
+	return (unsigned long *) page_to_phys(page);
+}
+
+void crst_table_free(struct mm_struct *mm, unsigned long *table)
+{
+	free_pages((unsigned long) table, 2);
+}
+
+static void __crst_table_upgrade(void *arg)
+{
+	struct mm_struct *mm = arg;
+
+	if (current->active_mm == mm) {
+		clear_user_asce();
+		set_user_asce(mm);
+	}
+	__tlb_flush_local();
+}
+
+int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
+{
+	unsigned long *table, *pgd;
+	unsigned long entry;
+	int flush;
+
+	BUG_ON(limit > TASK_MAX_SIZE);
+	flush = 0;
+repeat:
+	table = crst_table_alloc(mm);
+	if (!table)
+		return -ENOMEM;
+	spin_lock_bh(&mm->page_table_lock);
+	if (mm->context.asce_limit < limit) {
+		pgd = (unsigned long *) mm->pgd;
+		if (mm->context.asce_limit <= (1UL << 31)) {
+			entry = _REGION3_ENTRY_EMPTY;
+			mm->context.asce_limit = 1UL << 42;
+			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
+						_ASCE_USER_BITS |
+						_ASCE_TYPE_REGION3;
+		} else {
+			entry = _REGION2_ENTRY_EMPTY;
+			mm->context.asce_limit = 1UL << 53;
+			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
+						_ASCE_USER_BITS |
+						_ASCE_TYPE_REGION2;
+		}
+		crst_table_init(table, entry);
+		pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
+		mm->pgd = (pgd_t *) table;
+		mm->task_size = mm->context.asce_limit;
+		table = NULL;
+		flush = 1;
+	}
+	spin_unlock_bh(&mm->page_table_lock);
+	if (table)
+		crst_table_free(mm, table);
+	if (mm->context.asce_limit < limit)
+		goto repeat;
+	if (flush)
+		on_each_cpu(__crst_table_upgrade, mm, 0);
+	return 0;
+}
+
+void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
+{
+	pgd_t *pgd;
+
+	if (current->active_mm == mm) {
+		clear_user_asce();
+		__tlb_flush_mm(mm);
+	}
+	while (mm->context.asce_limit > limit) {
+		pgd = mm->pgd;
+		switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) {
+		case _REGION_ENTRY_TYPE_R2:
+			mm->context.asce_limit = 1UL << 42;
+			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
+						_ASCE_USER_BITS |
+						_ASCE_TYPE_REGION3;
+			break;
+		case _REGION_ENTRY_TYPE_R3:
+			mm->context.asce_limit = 1UL << 31;
+			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
+						_ASCE_USER_BITS |
+						_ASCE_TYPE_SEGMENT;
+			break;
+		default:
+			BUG();
+		}
+		mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
+		mm->task_size = mm->context.asce_limit;
+		crst_table_free(mm, (unsigned long *) pgd);
+	}
+	if (current->active_mm == mm)
+		set_user_asce(mm);
+}
+
+static inline unsigned int atomic_xor_bits(atomic_t *v, unsigned int bits)
+{
+	unsigned int old, new;
+
+	do {
+		old = atomic_read(v);
+		new = old ^ bits;
+	} while (atomic_cmpxchg(v, old, new) != old);
+	return new;
+}
+
+/*
+ * page table entry allocation/free routines.
+ */
+unsigned long *page_table_alloc(struct mm_struct *mm)
+{
+	unsigned long *table;
+	struct page *page;
+	unsigned int mask, bit;
+
+	/* Try to get a fragment of a 4K page as a 2K page table */
+	if (!mm_alloc_pgste(mm)) {
+		table = NULL;
+		spin_lock_bh(&mm->context.list_lock);
+		if (!list_empty(&mm->context.pgtable_list)) {
+			page = list_first_entry(&mm->context.pgtable_list,
+						struct page, lru);
+			mask = atomic_read(&page->_mapcount);
+			mask = (mask | (mask >> 4)) & 3;
+			if (mask != 3) {
+				table = (unsigned long *) page_to_phys(page);
+				bit = mask & 1;		/* =1 -> second 2K */
+				if (bit)
+					table += PTRS_PER_PTE;
+				atomic_xor_bits(&page->_mapcount, 1U << bit);
+				list_del(&page->lru);
+			}
+		}
+		spin_unlock_bh(&mm->context.list_lock);
+		if (table)
+			return table;
+	}
+	/* Allocate a fresh page */
+	page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
+	if (!page)
+		return NULL;
+	if (!pgtable_page_ctor(page)) {
+		__free_page(page);
+		return NULL;
+	}
+	/* Initialize page table */
+	table = (unsigned long *) page_to_phys(page);
+	if (mm_alloc_pgste(mm)) {
+		/* Return 4K page table with PGSTEs */
+		atomic_set(&page->_mapcount, 3);
+		clear_table(table, _PAGE_INVALID, PAGE_SIZE/2);
+		clear_table(table + PTRS_PER_PTE, 0, PAGE_SIZE/2);
+	} else {
+		/* Return the first 2K fragment of the page */
+		atomic_set(&page->_mapcount, 1);
+		clear_table(table, _PAGE_INVALID, PAGE_SIZE);
+		spin_lock_bh(&mm->context.list_lock);
+		list_add(&page->lru, &mm->context.pgtable_list);
+		spin_unlock_bh(&mm->context.list_lock);
+	}
+	return table;
+}
+
+void page_table_free(struct mm_struct *mm, unsigned long *table)
+{
+	struct page *page;
+	unsigned int bit, mask;
+
+	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+	if (!mm_alloc_pgste(mm)) {
+		/* Free 2K page table fragment of a 4K page */
+		bit = (__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t));
+		spin_lock_bh(&mm->context.list_lock);
+		mask = atomic_xor_bits(&page->_mapcount, 1U << bit);
+		if (mask & 3)
+			list_add(&page->lru, &mm->context.pgtable_list);
+		else
+			list_del(&page->lru);
+		spin_unlock_bh(&mm->context.list_lock);
+		if (mask != 0)
+			return;
+	}
+
+	pgtable_page_dtor(page);
+	atomic_set(&page->_mapcount, -1);
+	__free_page(page);
+}
+
+void page_table_free_rcu(struct mmu_gather *tlb, unsigned long *table,
+			 unsigned long vmaddr)
+{
+	struct mm_struct *mm;
+	struct page *page;
+	unsigned int bit, mask;
+
+	mm = tlb->mm;
+	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+	if (mm_alloc_pgste(mm)) {
+		gmap_unlink(mm, table, vmaddr);
+		table = (unsigned long *) (__pa(table) | 3);
+		tlb_remove_table(tlb, table);
+		return;
+	}
+	bit = (__pa(table) & ~PAGE_MASK) / (PTRS_PER_PTE*sizeof(pte_t));
+	spin_lock_bh(&mm->context.list_lock);
+	mask = atomic_xor_bits(&page->_mapcount, 0x11U << bit);
+	if (mask & 3)
+		list_add_tail(&page->lru, &mm->context.pgtable_list);
+	else
+		list_del(&page->lru);
+	spin_unlock_bh(&mm->context.list_lock);
+	table = (unsigned long *) (__pa(table) | (1U << bit));
+	tlb_remove_table(tlb, table);
+}
+
+static void __tlb_remove_table(void *_table)
+{
+	unsigned int mask = (unsigned long) _table & 3;
+	void *table = (void *)((unsigned long) _table ^ mask);
+	struct page *page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
+
+	switch (mask) {
+	case 0:		/* pmd or pud */
+		free_pages((unsigned long) table, 2);
+		break;
+	case 1:		/* lower 2K of a 4K page table */
+	case 2:		/* higher 2K of a 4K page table */
+		if (atomic_xor_bits(&page->_mapcount, mask << 4) != 0)
+			break;
+		/* fallthrough */
+	case 3:		/* 4K page table with pgstes */
+		pgtable_page_dtor(page);
+		atomic_set(&page->_mapcount, -1);
+		__free_page(page);
+		break;
+	}
+}
+
+static void tlb_remove_table_smp_sync(void *arg)
+{
+	/* Simply deliver the interrupt */
+}
+
+static void tlb_remove_table_one(void *table)
+{
+	/*
+	 * This isn't an RCU grace period and hence the page-tables cannot be
+	 * assumed to be actually RCU-freed.
+	 *
+	 * It is however sufficient for software page-table walkers that rely
+	 * on IRQ disabling. See the comment near struct mmu_table_batch.
+	 */
+	smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
+	__tlb_remove_table(table);
+}
+
+static void tlb_remove_table_rcu(struct rcu_head *head)
+{
+	struct mmu_table_batch *batch;
+	int i;
+
+	batch = container_of(head, struct mmu_table_batch, rcu);
+
+	for (i = 0; i < batch->nr; i++)
+		__tlb_remove_table(batch->tables[i]);
+
+	free_page((unsigned long)batch);
+}
+
+void tlb_table_flush(struct mmu_gather *tlb)
+{
+	struct mmu_table_batch **batch = &tlb->batch;
+
+	if (*batch) {
+		call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu);
+		*batch = NULL;
+	}
+}
+
+void tlb_remove_table(struct mmu_gather *tlb, void *table)
+{
+	struct mmu_table_batch **batch = &tlb->batch;
+
+	tlb->mm->context.flush_mm = 1;
+	if (*batch == NULL) {
+		*batch = (struct mmu_table_batch *)
+			__get_free_page(GFP_NOWAIT | __GFP_NOWARN);
+		if (*batch == NULL) {
+			__tlb_flush_mm_lazy(tlb->mm);
+			tlb_remove_table_one(table);
+			return;
+		}
+		(*batch)->nr = 0;
+	}
+	(*batch)->tables[(*batch)->nr++] = table;
+	if ((*batch)->nr == MAX_TABLE_BATCH)
+		tlb_flush_mmu(tlb);
+}
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 54ef3bc01b43..4324b87f9398 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -24,799 +24,501 @@
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
 
-unsigned long *crst_table_alloc(struct mm_struct *mm)
-{
-	struct page *page = alloc_pages(GFP_KERNEL, 2);
-
-	if (!page)
-		return NULL;
-	return (unsigned long *) page_to_phys(page);
+static inline pte_t ptep_flush_direct(struct mm_struct *mm,
+				      unsigned long addr, pte_t *ptep)
+{
+	int active, count;
+	pte_t old;
+
+	old = *ptep;
+	if (unlikely(pte_val(old) & _PAGE_INVALID))
+		return old;
+	active = (mm == current->active_mm) ? 1 : 0;
+	count = atomic_add_return(0x10000, &mm->context.attach_count);
+	if (MACHINE_HAS_TLB_LC && (count & 0xffff) <= active &&
+	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
+		__ptep_ipte_local(addr, ptep);
+	else
+		__ptep_ipte(addr, ptep);
+	atomic_sub(0x10000, &mm->context.attach_count);
+	return old;
 }
 
-void crst_table_free(struct mm_struct *mm, unsigned long *table)
+static inline pte_t ptep_flush_lazy(struct mm_struct *mm,
+				    unsigned long addr, pte_t *ptep)
 {
-	free_pages((unsigned long) table, 2);
+	int active, count;
+	pte_t old;
+
+	old = *ptep;
+	if (unlikely(pte_val(old) & _PAGE_INVALID))
+		return old;
+	active = (mm == current->active_mm) ? 1 : 0;
+	count = atomic_add_return(0x10000, &mm->context.attach_count);
+	if ((count & 0xffff) <= active) {
+		pte_val(*ptep) |= _PAGE_INVALID;
+		mm->context.flush_mm = 1;
+	} else
+		__ptep_ipte(addr, ptep);
+	atomic_sub(0x10000, &mm->context.attach_count);
+	return old;
 }
 
-static void __crst_table_upgrade(void *arg)
+static inline pgste_t pgste_get_lock(pte_t *ptep)
 {
-	struct mm_struct *mm = arg;
+	unsigned long new = 0;
+#ifdef CONFIG_PGSTE
+	unsigned long old;
 
-	if (current->active_mm == mm) {
-		clear_user_asce();
-		set_user_asce(mm);
-	}
-	__tlb_flush_local();
+	preempt_disable();
+	asm(
+		"	lg	%0,%2\n"
+		"0:	lgr	%1,%0\n"
+		"	nihh	%0,0xff7f\n"	/* clear PCL bit in old */
+		"	oihh	%1,0x0080\n"	/* set PCL bit in new */
+		"	csg	%0,%1,%2\n"
+		"	jl	0b\n"
+		: "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE])
+		: "Q" (ptep[PTRS_PER_PTE]) : "cc", "memory");
+#endif
+	return __pgste(new);
 }
 
-int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
+static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste)
 {
-	unsigned long *table, *pgd;
-	unsigned long entry;
-	int flush;
-
-	BUG_ON(limit > (1UL << 53));
-	flush = 0;
-repeat:
-	table = crst_table_alloc(mm);
-	if (!table)
-		return -ENOMEM;
-	spin_lock_bh(&mm->page_table_lock);
-	if (mm->context.asce_limit < limit) {
-		pgd = (unsigned long *) mm->pgd;
-		if (mm->context.asce_limit <= (1UL << 31)) {
-			entry = _REGION3_ENTRY_EMPTY;
-			mm->context.asce_limit = 1UL << 42;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_REGION3;
-		} else {
-			entry = _REGION2_ENTRY_EMPTY;
-			mm->context.asce_limit = 1UL << 53;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_REGION2;
-		}
-		crst_table_init(table, entry);
-		pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
-		mm->pgd = (pgd_t *) table;
-		mm->task_size = mm->context.asce_limit;
-		table = NULL;
-		flush = 1;
-	}
-	spin_unlock_bh(&mm->page_table_lock);
-	if (table)
-		crst_table_free(mm, table);
-	if (mm->context.asce_limit < limit)
-		goto repeat;
-	if (flush)
-		on_each_cpu(__crst_table_upgrade, mm, 0);
-	return 0;
+#ifdef CONFIG_PGSTE
+	asm(
+		"	nihh	%1,0xff7f\n"	/* clear PCL bit */
+		"	stg	%1,%0\n"
+		: "=Q" (ptep[PTRS_PER_PTE])
+		: "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE])
+		: "cc", "memory");
+	preempt_enable();
+#endif
 }
 
-void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
+static inline pgste_t pgste_get(pte_t *ptep)
 {
-	pgd_t *pgd;
-
-	if (current->active_mm == mm) {
-		clear_user_asce();
-		__tlb_flush_mm(mm);
-	}
-	while (mm->context.asce_limit > limit) {
-		pgd = mm->pgd;
-		switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) {
-		case _REGION_ENTRY_TYPE_R2:
-			mm->context.asce_limit = 1UL << 42;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_REGION3;
-			break;
-		case _REGION_ENTRY_TYPE_R3:
-			mm->context.asce_limit = 1UL << 31;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_SEGMENT;
-			break;
-		default:
-			BUG();
-		}
-		mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
-		mm->task_size = mm->context.asce_limit;
-		crst_table_free(mm, (unsigned long *) pgd);
-	}
-	if (current->active_mm == mm)
-		set_user_asce(mm);
+	unsigned long pgste = 0;
+#ifdef CONFIG_PGSTE
+	pgste = *(unsigned long *)(ptep + PTRS_PER_PTE);
+#endif
+	return __pgste(pgste);
 }
 
+static inline void pgste_set(pte_t *ptep, pgste_t pgste)
+{
 #ifdef CONFIG_PGSTE
+	*(pgste_t *)(ptep + PTRS_PER_PTE) = pgste;
+#endif
+}
 
-/**
- * gmap_alloc - allocate a guest address space
- * @mm: pointer to the parent mm_struct
- * @limit: maximum size of the gmap address space
- *
- * Returns a guest address space structure.
- */
-struct gmap *gmap_alloc(struct mm_struct *mm, unsigned long limit)
+static inline pgste_t pgste_update_all(pte_t pte, pgste_t pgste,
+				       struct mm_struct *mm)
 {
-	struct gmap *gmap;
-	struct page *page;
-	unsigned long *table;
-	unsigned long etype, atype;
-
-	if (limit < (1UL << 31)) {
-		limit = (1UL << 31) - 1;
-		atype = _ASCE_TYPE_SEGMENT;
-		etype = _SEGMENT_ENTRY_EMPTY;
-	} else if (limit < (1UL << 42)) {
-		limit = (1UL << 42) - 1;
-		atype = _ASCE_TYPE_REGION3;
-		etype = _REGION3_ENTRY_EMPTY;
-	} else if (limit < (1UL << 53)) {
-		limit = (1UL << 53) - 1;
-		atype = _ASCE_TYPE_REGION2;
-		etype = _REGION2_ENTRY_EMPTY;
-	} else {
-		limit = -1UL;
-		atype = _ASCE_TYPE_REGION1;
-		etype = _REGION1_ENTRY_EMPTY;
-	}
-	gmap = kzalloc(sizeof(struct gmap), GFP_KERNEL);
-	if (!gmap)
-		goto out;
-	INIT_LIST_HEAD(&gmap->crst_list);
-	INIT_RADIX_TREE(&gmap->guest_to_host, GFP_KERNEL);
-	INIT_RADIX_TREE(&gmap->host_to_guest, GFP_ATOMIC);
-	spin_lock_init(&gmap->guest_table_lock);
-	gmap->mm = mm;
-	page = alloc_pages(GFP_KERNEL, 2);
-	if (!page)
-		goto out_free;
-	page->index = 0;
-	list_add(&page->lru, &gmap->crst_list);
-	table = (unsigned long *) page_to_phys(page);
-	crst_table_init(table, etype);
-	gmap->table = table;
-	gmap->asce = atype | _ASCE_TABLE_LENGTH |
-		_ASCE_USER_BITS | __pa(table);
-	gmap->asce_end = limit;
-	down_write(&mm->mmap_sem);
-	list_add(&gmap->list, &mm->context.gmap_list);
-	up_write(&mm->mmap_sem);
-	return gmap;
-
-out_free:
-	kfree(gmap);
-out:
-	return NULL;
+#ifdef CONFIG_PGSTE
+	unsigned long address, bits, skey;
+
+	if (!mm_use_skey(mm) || pte_val(pte) & _PAGE_INVALID)
+		return pgste;
+	address = pte_val(pte) & PAGE_MASK;
+	skey = (unsigned long) page_get_storage_key(address);
+	bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED);
+	/* Transfer page changed & referenced bit to guest bits in pgste */
+	pgste_val(pgste) |= bits << 48;		/* GR bit & GC bit */
+	/* Copy page access key and fetch protection bit to pgste */
+	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT);
+	pgste_val(pgste) |= (skey & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56;
+#endif
+	return pgste;
+
 }
-EXPORT_SYMBOL_GPL(gmap_alloc);
 
-static void gmap_flush_tlb(struct gmap *gmap)
+static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry,
+				 struct mm_struct *mm)
 {
-	if (MACHINE_HAS_IDTE)
-		__tlb_flush_asce(gmap->mm, gmap->asce);
-	else
-		__tlb_flush_global();
+#ifdef CONFIG_PGSTE
+	unsigned long address;
+	unsigned long nkey;
+
+	if (!mm_use_skey(mm) || pte_val(entry) & _PAGE_INVALID)
+		return;
+	VM_BUG_ON(!(pte_val(*ptep) & _PAGE_INVALID));
+	address = pte_val(entry) & PAGE_MASK;
+	/*
+	 * Set page access key and fetch protection bit from pgste.
+	 * The guest C/R information is still in the PGSTE, set real
+	 * key C/R to 0.
+	 */
+	nkey = (pgste_val(pgste) & (PGSTE_ACC_BITS | PGSTE_FP_BIT)) >> 56;
+	nkey |= (pgste_val(pgste) & (PGSTE_GR_BIT | PGSTE_GC_BIT)) >> 48;
+	page_set_storage_key(address, nkey, 0);
+#endif
 }
 
-static void gmap_radix_tree_free(struct radix_tree_root *root)
+static inline pgste_t pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry)
 {
-	struct radix_tree_iter iter;
-	unsigned long indices[16];
-	unsigned long index;
-	void **slot;
-	int i, nr;
-
-	/* A radix tree is freed by deleting all of its entries */
-	index = 0;
-	do {
-		nr = 0;
-		radix_tree_for_each_slot(slot, root, &iter, index) {
-			indices[nr] = iter.index;
-			if (++nr == 16)
-				break;
-		}
-		for (i = 0; i < nr; i++) {
-			index = indices[i];
-			radix_tree_delete(root, index);
+#ifdef CONFIG_PGSTE
+	if ((pte_val(entry) & _PAGE_PRESENT) &&
+	    (pte_val(entry) & _PAGE_WRITE) &&
+	    !(pte_val(entry) & _PAGE_INVALID)) {
+		if (!MACHINE_HAS_ESOP) {
+			/*
+			 * Without enhanced suppression-on-protection force
+			 * the dirty bit on for all writable ptes.
+			 */
+			pte_val(entry) |= _PAGE_DIRTY;
+			pte_val(entry) &= ~_PAGE_PROTECT;
 		}
-	} while (nr > 0);
+		if (!(pte_val(entry) & _PAGE_PROTECT))
+			/* This pte allows write access, set user-dirty */
+			pgste_val(pgste) |= PGSTE_UC_BIT;
+	}
+#endif
+	*ptep = entry;
+	return pgste;
 }
 
-/**
- * gmap_free - free a guest address space
- * @gmap: pointer to the guest address space structure
- */
-void gmap_free(struct gmap *gmap)
+static inline pgste_t pgste_ipte_notify(struct mm_struct *mm,
+					unsigned long addr,
+					pte_t *ptep, pgste_t pgste)
 {
-	struct page *page, *next;
-
-	/* Flush tlb. */
-	if (MACHINE_HAS_IDTE)
-		__tlb_flush_asce(gmap->mm, gmap->asce);
-	else
-		__tlb_flush_global();
-
-	/* Free all segment & region tables. */
-	list_for_each_entry_safe(page, next, &gmap->crst_list, lru)
-		__free_pages(page, 2);
-	gmap_radix_tree_free(&gmap->guest_to_host);
-	gmap_radix_tree_free(&gmap->host_to_guest);
-	down_write(&gmap->mm->mmap_sem);
-	list_del(&gmap->list);
-	up_write(&gmap->mm->mmap_sem);
-	kfree(gmap);
+#ifdef CONFIG_PGSTE
+	if (pgste_val(pgste) & PGSTE_IN_BIT) {
+		pgste_val(pgste) &= ~PGSTE_IN_BIT;
+		ptep_notify(mm, addr, ptep);
+	}
+#endif
+	return pgste;
 }
-EXPORT_SYMBOL_GPL(gmap_free);
 
-/**
- * gmap_enable - switch primary space to the guest address space
- * @gmap: pointer to the guest address space structure
- */
-void gmap_enable(struct gmap *gmap)
+static inline pgste_t ptep_xchg_start(struct mm_struct *mm,
+				      unsigned long addr, pte_t *ptep)
 {
-	S390_lowcore.gmap = (unsigned long) gmap;
+	pgste_t pgste = __pgste(0);
+
+	if (mm_has_pgste(mm)) {
+		pgste = pgste_get_lock(ptep);
+		pgste = pgste_ipte_notify(mm, addr, ptep, pgste);
+	}
+	return pgste;
 }
-EXPORT_SYMBOL_GPL(gmap_enable);
 
-/**
- * gmap_disable - switch back to the standard primary address space
- * @gmap: pointer to the guest address space structure
- */
-void gmap_disable(struct gmap *gmap)
+static inline void ptep_xchg_commit(struct mm_struct *mm,
+				    unsigned long addr, pte_t *ptep,
+				    pgste_t pgste, pte_t old, pte_t new)
 {
-	S390_lowcore.gmap = 0UL;
+	if (mm_has_pgste(mm)) {
+		if (pte_val(old) & _PAGE_INVALID)
+			pgste_set_key(ptep, pgste, new, mm);
+		if (pte_val(new) & _PAGE_INVALID) {
+			pgste = pgste_update_all(old, pgste, mm);
+			if ((pgste_val(pgste) & _PGSTE_GPS_USAGE_MASK) ==
+			    _PGSTE_GPS_USAGE_UNUSED)
+				pte_val(old) |= _PAGE_UNUSED;
+		}
+		pgste = pgste_set_pte(ptep, pgste, new);
+		pgste_set_unlock(ptep, pgste);
+	} else {
+		*ptep = new;
+	}
 }
-EXPORT_SYMBOL_GPL(gmap_disable);
 
-/*
- * gmap_alloc_table is assumed to be called with mmap_sem held
- */
-static int gmap_alloc_table(struct gmap *gmap, unsigned long *table,
-			    unsigned long init, unsigned long gaddr)
+pte_t ptep_xchg_direct(struct mm_struct *mm, unsigned long addr,
+		       pte_t *ptep, pte_t new)
 {
-	struct page *page;
-	unsigned long *new;
-
-	/* since we dont free the gmap table until gmap_free we can unlock */
-	page = alloc_pages(GFP_KERNEL, 2);
-	if (!page)
-		return -ENOMEM;
-	new = (unsigned long *) page_to_phys(page);
-	crst_table_init(new, init);
-	spin_lock(&gmap->mm->page_table_lock);
-	if (*table & _REGION_ENTRY_INVALID) {
-		list_add(&page->lru, &gmap->crst_list);
-		*table = (unsigned long) new | _REGION_ENTRY_LENGTH |
-			(*table & _REGION_ENTRY_TYPE_MASK);
-		page->index = gaddr;
-		page = NULL;
-	}
-	spin_unlock(&gmap->mm->page_table_lock);
-	if (page)
-		__free_pages(page, 2);
-	return 0;
+	pgste_t pgste;
+	pte_t old;
+
+	pgste = ptep_xchg_start(mm, addr, ptep);
+	old = ptep_flush_direct(mm, addr, ptep);
+	ptep_xchg_commit(mm, addr, ptep, pgste, old, new);
+	return old;
 }
+EXPORT_SYMBOL(ptep_xchg_direct);
 
-/**
- * __gmap_segment_gaddr - find virtual address from segment pointer
- * @entry: pointer to a segment table entry in the guest address space
- *
- * Returns the virtual address in the guest address space for the segment
- */
-static unsigned long __gmap_segment_gaddr(unsigned long *entry)
+pte_t ptep_xchg_lazy(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t new)
 {
-	struct page *page;
-	unsigned long offset, mask;
-
-	offset = (unsigned long) entry / sizeof(unsigned long);
-	offset = (offset & (PTRS_PER_PMD - 1)) * PMD_SIZE;
-	mask = ~(PTRS_PER_PMD * sizeof(pmd_t) - 1);
-	page = virt_to_page((void *)((unsigned long) entry & mask));
-	return page->index + offset;
+	pgste_t pgste;
+	pte_t old;
+
+	pgste = ptep_xchg_start(mm, addr, ptep);
+	old = ptep_flush_lazy(mm, addr, ptep);
+	ptep_xchg_commit(mm, addr, ptep, pgste, old, new);
+	return old;
 }
+EXPORT_SYMBOL(ptep_xchg_lazy);
 
-/**
- * __gmap_unlink_by_vmaddr - unlink a single segment via a host address
- * @gmap: pointer to the guest address space structure
- * @vmaddr: address in the host process address space
- *
- * Returns 1 if a TLB flush is required
- */
-static int __gmap_unlink_by_vmaddr(struct gmap *gmap, unsigned long vmaddr)
+pte_t ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
 {
-	unsigned long *entry;
-	int flush = 0;
-
-	spin_lock(&gmap->guest_table_lock);
-	entry = radix_tree_delete(&gmap->host_to_guest, vmaddr >> PMD_SHIFT);
-	if (entry) {
-		flush = (*entry != _SEGMENT_ENTRY_INVALID);
-		*entry = _SEGMENT_ENTRY_INVALID;
+	pgste_t pgste;
+	pte_t old;
+
+	pgste = ptep_xchg_start(mm, addr, ptep);
+	old = ptep_flush_lazy(mm, addr, ptep);
+	if (mm_has_pgste(mm)) {
+		pgste = pgste_update_all(old, pgste, mm);
+		pgste_set(ptep, pgste);
 	}
-	spin_unlock(&gmap->guest_table_lock);
-	return flush;
+	return old;
 }
+EXPORT_SYMBOL(ptep_modify_prot_start);
 
-/**
- * __gmap_unmap_by_gaddr - unmap a single segment via a guest address
- * @gmap: pointer to the guest address space structure
- * @gaddr: address in the guest address space
- *
- * Returns 1 if a TLB flush is required
- */
-static int __gmap_unmap_by_gaddr(struct gmap *gmap, unsigned long gaddr)
+void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep, pte_t pte)
 {
-	unsigned long vmaddr;
+	pgste_t pgste;
 
-	vmaddr = (unsigned long) radix_tree_delete(&gmap->guest_to_host,
-						   gaddr >> PMD_SHIFT);
-	return vmaddr ? __gmap_unlink_by_vmaddr(gmap, vmaddr) : 0;
+	if (mm_has_pgste(mm)) {
+		pgste = pgste_get(ptep);
+		pgste_set_key(ptep, pgste, pte, mm);
+		pgste = pgste_set_pte(ptep, pgste, pte);
+		pgste_set_unlock(ptep, pgste);
+	} else {
+		*ptep = pte;
+	}
 }
+EXPORT_SYMBOL(ptep_modify_prot_commit);
 
-/**
- * gmap_unmap_segment - unmap segment from the guest address space
- * @gmap: pointer to the guest address space structure
- * @to: address in the guest address space
- * @len: length of the memory area to unmap
- *
- * Returns 0 if the unmap succeeded, -EINVAL if not.
- */
-int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len)
+static inline pmd_t pmdp_flush_direct(struct mm_struct *mm,
+				      unsigned long addr, pmd_t *pmdp)
 {
-	unsigned long off;
-	int flush;
-
-	if ((to | len) & (PMD_SIZE - 1))
-		return -EINVAL;
-	if (len == 0 || to + len < to)
-		return -EINVAL;
-
-	flush = 0;
-	down_write(&gmap->mm->mmap_sem);
-	for (off = 0; off < len; off += PMD_SIZE)
-		flush |= __gmap_unmap_by_gaddr(gmap, to + off);
-	up_write(&gmap->mm->mmap_sem);
-	if (flush)
-		gmap_flush_tlb(gmap);
-	return 0;
+	int active, count;
+	pmd_t old;
+
+	old = *pmdp;
+	if (pmd_val(old) & _SEGMENT_ENTRY_INVALID)
+		return old;
+	if (!MACHINE_HAS_IDTE) {
+		__pmdp_csp(pmdp);
+		return old;
+	}
+	active = (mm == current->active_mm) ? 1 : 0;
+	count = atomic_add_return(0x10000, &mm->context.attach_count);
+	if (MACHINE_HAS_TLB_LC && (count & 0xffff) <= active &&
+	    cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id())))
+		__pmdp_idte_local(addr, pmdp);
+	else
+		__pmdp_idte(addr, pmdp);
+	atomic_sub(0x10000, &mm->context.attach_count);
+	return old;
+}
+
+static inline pmd_t pmdp_flush_lazy(struct mm_struct *mm,
+				    unsigned long addr, pmd_t *pmdp)
+{
+	int active, count;
+	pmd_t old;
+
+	old = *pmdp;
+	if (pmd_val(old) & _SEGMENT_ENTRY_INVALID)
+		return old;
+	active = (mm == current->active_mm) ? 1 : 0;
+	count = atomic_add_return(0x10000, &mm->context.attach_count);
+	if ((count & 0xffff) <= active) {
+		pmd_val(*pmdp) |= _SEGMENT_ENTRY_INVALID;
+		mm->context.flush_mm = 1;
+	} else if (MACHINE_HAS_IDTE)
+		__pmdp_idte(addr, pmdp);
+	else
+		__pmdp_csp(pmdp);
+	atomic_sub(0x10000, &mm->context.attach_count);
+	return old;
 }
-EXPORT_SYMBOL_GPL(gmap_unmap_segment);
-
-/**
- * gmap_mmap_segment - map a segment to the guest address space
- * @gmap: pointer to the guest address space structure
- * @from: source address in the parent address space
- * @to: target address in the guest address space
- * @len: length of the memory area to map
- *
- * Returns 0 if the mmap succeeded, -EINVAL or -ENOMEM if not.
- */
-int gmap_map_segment(struct gmap *gmap, unsigned long from,
-		     unsigned long to, unsigned long len)
+
+pmd_t pmdp_xchg_direct(struct mm_struct *mm, unsigned long addr,
+		       pmd_t *pmdp, pmd_t new)
 {
-	unsigned long off;
-	int flush;
-
-	if ((from | to | len) & (PMD_SIZE - 1))
-		return -EINVAL;
-	if (len == 0 || from + len < from || to + len < to ||
-	    from + len > TASK_MAX_SIZE || to + len > gmap->asce_end)
-		return -EINVAL;
-
-	flush = 0;
-	down_write(&gmap->mm->mmap_sem);
-	for (off = 0; off < len; off += PMD_SIZE) {
-		/* Remove old translation */
-		flush |= __gmap_unmap_by_gaddr(gmap, to + off);
-		/* Store new translation */
-		if (radix_tree_insert(&gmap->guest_to_host,
-				      (to + off) >> PMD_SHIFT,
-				      (void *) from + off))
-			break;
-	}
-	up_write(&gmap->mm->mmap_sem);
-	if (flush)
-		gmap_flush_tlb(gmap);
-	if (off >= len)
-		return 0;
-	gmap_unmap_segment(gmap, to, len);
-	return -ENOMEM;
+	pmd_t old;
+
+	old = pmdp_flush_direct(mm, addr, pmdp);
+	*pmdp = new;
+	return old;
 }
-EXPORT_SYMBOL_GPL(gmap_map_segment);
-
-/**
- * __gmap_translate - translate a guest address to a user space address
- * @gmap: pointer to guest mapping meta data structure
- * @gaddr: guest address
- *
- * Returns user space address which corresponds to the guest address or
- * -EFAULT if no such mapping exists.
- * This function does not establish potentially missing page table entries.
- * The mmap_sem of the mm that belongs to the address space must be held
- * when this function gets called.
- */
-unsigned long __gmap_translate(struct gmap *gmap, unsigned long gaddr)
+EXPORT_SYMBOL(pmdp_xchg_direct);
+
+pmd_t pmdp_xchg_lazy(struct mm_struct *mm, unsigned long addr,
+		     pmd_t *pmdp, pmd_t new)
 {
-	unsigned long vmaddr;
+	pmd_t old;
 
-	vmaddr = (unsigned long)
-		radix_tree_lookup(&gmap->guest_to_host, gaddr >> PMD_SHIFT);
-	return vmaddr ? (vmaddr | (gaddr & ~PMD_MASK)) : -EFAULT;
+	old = pmdp_flush_lazy(mm, addr, pmdp);
+	*pmdp = new;
+	return old;
 }
-EXPORT_SYMBOL_GPL(__gmap_translate);
-
-/**
- * gmap_translate - translate a guest address to a user space address
- * @gmap: pointer to guest mapping meta data structure
- * @gaddr: guest address
- *
- * Returns user space address which corresponds to the guest address or
- * -EFAULT if no such mapping exists.
- * This function does not establish potentially missing page table entries.
- */
-unsigned long gmap_translate(struct gmap *gmap, unsigned long gaddr)
+EXPORT_SYMBOL(pmdp_xchg_lazy);
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
+				pgtable_t pgtable)
 {
-	unsigned long rc;
+	struct list_head *lh = (struct list_head *) pgtable;
+
+	assert_spin_locked(pmd_lockptr(mm, pmdp));
 
-	down_read(&gmap->mm->mmap_sem);
-	rc = __gmap_translate(gmap, gaddr);
-	up_read(&gmap->mm->mmap_sem);
-	return rc;
+	/* FIFO */
+	if (!pmd_huge_pte(mm, pmdp))
+		INIT_LIST_HEAD(lh);
+	else
+		list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp));
+	pmd_huge_pte(mm, pmdp) = pgtable;
 }
-EXPORT_SYMBOL_GPL(gmap_translate);
 
-/**
- * gmap_unlink - disconnect a page table from the gmap shadow tables
- * @gmap: pointer to guest mapping meta data structure
- * @table: pointer to the host page table
- * @vmaddr: vm address associated with the host page table
- */
-static void gmap_unlink(struct mm_struct *mm, unsigned long *table,
-			unsigned long vmaddr)
+pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
 {
-	struct gmap *gmap;
-	int flush;
+	struct list_head *lh;
+	pgtable_t pgtable;
+	pte_t *ptep;
+
+	assert_spin_locked(pmd_lockptr(mm, pmdp));
 
-	list_for_each_entry(gmap, &mm->context.gmap_list, list) {
-		flush = __gmap_unlink_by_vmaddr(gmap, vmaddr);
-		if (flush)
-			gmap_flush_tlb(gmap);
+	/* FIFO */
+	pgtable = pmd_huge_pte(mm, pmdp);
+	lh = (struct list_head *) pgtable;
+	if (list_empty(lh))
+		pmd_huge_pte(mm, pmdp) = NULL;
+	else {
+		pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next;
+		list_del(lh);
 	}
+	ptep = (pte_t *) pgtable;
+	pte_val(*ptep) = _PAGE_INVALID;
+	ptep++;
+	pte_val(*ptep) = _PAGE_INVALID;
+	return pgtable;
 }
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
-/**
- * gmap_link - set up shadow page tables to connect a host to a guest address
- * @gmap: pointer to guest mapping meta data structure
- * @gaddr: guest address
- * @vmaddr: vm address
- *
- * Returns 0 on success, -ENOMEM for out of memory conditions, and -EFAULT
- * if the vm address is already mapped to a different guest segment.
- * The mmap_sem of the mm that belongs to the address space must be held
- * when this function gets called.
- */
-int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr)
+#ifdef CONFIG_PGSTE
+void ptep_set_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t entry)
 {
-	struct mm_struct *mm;
-	unsigned long *table;
-	spinlock_t *ptl;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	int rc;
-
-	/* Create higher level tables in the gmap page table */
-	table = gmap->table;
-	if ((gmap->asce & _ASCE_TYPE_MASK) >= _ASCE_TYPE_REGION1) {
-		table += (gaddr >> 53) & 0x7ff;
-		if ((*table & _REGION_ENTRY_INVALID) &&
-		    gmap_alloc_table(gmap, table, _REGION2_ENTRY_EMPTY,
-				     gaddr & 0xffe0000000000000UL))
-			return -ENOMEM;
-		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
-	}
-	if ((gmap->asce & _ASCE_TYPE_MASK) >= _ASCE_TYPE_REGION2) {
-		table += (gaddr >> 42) & 0x7ff;
-		if ((*table & _REGION_ENTRY_INVALID) &&
-		    gmap_alloc_table(gmap, table, _REGION3_ENTRY_EMPTY,
-				     gaddr & 0xfffffc0000000000UL))
-			return -ENOMEM;
-		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
-	}
-	if ((gmap->asce & _ASCE_TYPE_MASK) >= _ASCE_TYPE_REGION3) {
-		table += (gaddr >> 31) & 0x7ff;
-		if ((*table & _REGION_ENTRY_INVALID) &&
-		    gmap_alloc_table(gmap, table, _SEGMENT_ENTRY_EMPTY,
-				     gaddr & 0xffffffff80000000UL))
-			return -ENOMEM;
-		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
-	}
-	table += (gaddr >> 20) & 0x7ff;
-	/* Walk the parent mm page table */
-	mm = gmap->mm;
-	pgd = pgd_offset(mm, vmaddr);
-	VM_BUG_ON(pgd_none(*pgd));
-	pud = pud_offset(pgd, vmaddr);
-	VM_BUG_ON(pud_none(*pud));
-	pmd = pmd_offset(pud, vmaddr);
-	VM_BUG_ON(pmd_none(*pmd));
-	/* large pmds cannot yet be handled */
-	if (pmd_large(*pmd))
-		return -EFAULT;
-	/* Link gmap segment table entry location to page table. */
-	rc = radix_tree_preload(GFP_KERNEL);
-	if (rc)
-		return rc;
-	ptl = pmd_lock(mm, pmd);
-	spin_lock(&gmap->guest_table_lock);
-	if (*table == _SEGMENT_ENTRY_INVALID) {
-		rc = radix_tree_insert(&gmap->host_to_guest,
-				       vmaddr >> PMD_SHIFT, table);
-		if (!rc)
-			*table = pmd_val(*pmd);
-	} else
-		rc = 0;
-	spin_unlock(&gmap->guest_table_lock);
-	spin_unlock(ptl);
-	radix_tree_preload_end();
-	return rc;
+	pgste_t pgste;
+
+	/* the mm_has_pgste() check is done in set_pte_at() */
+	pgste = pgste_get_lock(ptep);
+	pgste_val(pgste) &= ~_PGSTE_GPS_ZERO;
+	pgste_set_key(ptep, pgste, entry, mm);
+	pgste = pgste_set_pte(ptep, pgste, entry);
+	pgste_set_unlock(ptep, pgste);
 }
 
-/**
- * gmap_fault - resolve a fault on a guest address
- * @gmap: pointer to guest mapping meta data structure
- * @gaddr: guest address
- * @fault_flags: flags to pass down to handle_mm_fault()
- *
- * Returns 0 on success, -ENOMEM for out of memory conditions, and -EFAULT
- * if the vm address is already mapped to a different guest segment.
- */
-int gmap_fault(struct gmap *gmap, unsigned long gaddr,
-	       unsigned int fault_flags)
+void ptep_set_notify(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
-	unsigned long vmaddr;
-	int rc;
-
-	down_read(&gmap->mm->mmap_sem);
-	vmaddr = __gmap_translate(gmap, gaddr);
-	if (IS_ERR_VALUE(vmaddr)) {
-		rc = vmaddr;
-		goto out_up;
-	}
-	if (fixup_user_fault(current, gmap->mm, vmaddr, fault_flags)) {
-		rc = -EFAULT;
-		goto out_up;
-	}
-	rc = __gmap_link(gmap, gaddr, vmaddr);
-out_up:
-	up_read(&gmap->mm->mmap_sem);
-	return rc;
+	pgste_t pgste;
+
+	pgste = pgste_get_lock(ptep);
+	pgste_val(pgste) |= PGSTE_IN_BIT;
+	pgste_set_unlock(ptep, pgste);
 }
-EXPORT_SYMBOL_GPL(gmap_fault);
 
-static void gmap_zap_swap_entry(swp_entry_t entry, struct mm_struct *mm)
+static void ptep_zap_swap_entry(struct mm_struct *mm, swp_entry_t entry)
 {
 	if (!non_swap_entry(entry))
 		dec_mm_counter(mm, MM_SWAPENTS);
 	else if (is_migration_entry(entry)) {
 		struct page *page = migration_entry_to_page(entry);
 
-		if (PageAnon(page))
-			dec_mm_counter(mm, MM_ANONPAGES);
-		else
-			dec_mm_counter(mm, MM_FILEPAGES);
+		dec_mm_counter(mm, mm_counter(page));
 	}
 	free_swap_and_cache(entry);
 }
 
-/*
- * this function is assumed to be called with mmap_sem held
- */
-void __gmap_zap(struct gmap *gmap, unsigned long gaddr)
+void ptep_zap_unused(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, int reset)
 {
-	unsigned long vmaddr, ptev, pgstev;
-	pte_t *ptep, pte;
-	spinlock_t *ptl;
+	unsigned long pgstev;
 	pgste_t pgste;
+	pte_t pte;
 
-	/* Find the vm address for the guest address */
-	vmaddr = (unsigned long) radix_tree_lookup(&gmap->guest_to_host,
-						   gaddr >> PMD_SHIFT);
-	if (!vmaddr)
-		return;
-	vmaddr |= gaddr & ~PMD_MASK;
-	/* Get pointer to the page table entry */
-	ptep = get_locked_pte(gmap->mm, vmaddr, &ptl);
-	if (unlikely(!ptep))
-		return;
-	pte = *ptep;
-	if (!pte_swap(pte))
-		goto out_pte;
 	/* Zap unused and logically-zero pages */
 	pgste = pgste_get_lock(ptep);
 	pgstev = pgste_val(pgste);
-	ptev = pte_val(pte);
-	if (((pgstev & _PGSTE_GPS_USAGE_MASK) == _PGSTE_GPS_USAGE_UNUSED) ||
-	    ((pgstev & _PGSTE_GPS_ZERO) && (ptev & _PAGE_INVALID))) {
-		gmap_zap_swap_entry(pte_to_swp_entry(pte), gmap->mm);
-		pte_clear(gmap->mm, vmaddr, ptep);
-	}
+	pte = *ptep;
+	if (pte_swap(pte) &&
+	    ((pgstev & _PGSTE_GPS_USAGE_MASK) == _PGSTE_GPS_USAGE_UNUSED ||
+	     (pgstev & _PGSTE_GPS_ZERO))) {
+		ptep_zap_swap_entry(mm, pte_to_swp_entry(pte));
+		pte_clear(mm, addr, ptep);
+	}
+	if (reset)
+		pgste_val(pgste) &= ~_PGSTE_GPS_USAGE_MASK;
 	pgste_set_unlock(ptep, pgste);
-out_pte:
-	pte_unmap_unlock(ptep, ptl);
 }
-EXPORT_SYMBOL_GPL(__gmap_zap);
 
-void gmap_discard(struct gmap *gmap, unsigned long from, unsigned long to)
+void ptep_zap_key(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
-	unsigned long gaddr, vmaddr, size;
-	struct vm_area_struct *vma;
-
-	down_read(&gmap->mm->mmap_sem);
-	for (gaddr = from; gaddr < to;
-	     gaddr = (gaddr + PMD_SIZE) & PMD_MASK) {
-		/* Find the vm address for the guest address */
-		vmaddr = (unsigned long)
-			radix_tree_lookup(&gmap->guest_to_host,
-					  gaddr >> PMD_SHIFT);
-		if (!vmaddr)
-			continue;
-		vmaddr |= gaddr & ~PMD_MASK;
-		/* Find vma in the parent mm */
-		vma = find_vma(gmap->mm, vmaddr);
-		size = min(to - gaddr, PMD_SIZE - (gaddr & ~PMD_MASK));
-		zap_page_range(vma, vmaddr, size, NULL);
-	}
-	up_read(&gmap->mm->mmap_sem);
-}
-EXPORT_SYMBOL_GPL(gmap_discard);
-
-static LIST_HEAD(gmap_notifier_list);
-static DEFINE_SPINLOCK(gmap_notifier_lock);
+	unsigned long ptev;
+	pgste_t pgste;
 
-/**
- * gmap_register_ipte_notifier - register a pte invalidation callback
- * @nb: pointer to the gmap notifier block
- */
-void gmap_register_ipte_notifier(struct gmap_notifier *nb)
-{
-	spin_lock(&gmap_notifier_lock);
-	list_add(&nb->list, &gmap_notifier_list);
-	spin_unlock(&gmap_notifier_lock);
+	/* Clear storage key */
+	pgste = pgste_get_lock(ptep);
+	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT |
+			      PGSTE_GR_BIT | PGSTE_GC_BIT);
+	ptev = pte_val(*ptep);
+	if (!(ptev & _PAGE_INVALID) && (ptev & _PAGE_WRITE))
+		page_set_storage_key(ptev & PAGE_MASK, PAGE_DEFAULT_KEY, 1);
+	pgste_set_unlock(ptep, pgste);
 }
-EXPORT_SYMBOL_GPL(gmap_register_ipte_notifier);
 
-/**
- * gmap_unregister_ipte_notifier - remove a pte invalidation callback
- * @nb: pointer to the gmap notifier block
- */
-void gmap_unregister_ipte_notifier(struct gmap_notifier *nb)
-{
-	spin_lock(&gmap_notifier_lock);
-	list_del_init(&nb->list);
-	spin_unlock(&gmap_notifier_lock);
-}
-EXPORT_SYMBOL_GPL(gmap_unregister_ipte_notifier);
-
-/**
- * gmap_ipte_notify - mark a range of ptes for invalidation notification
- * @gmap: pointer to guest mapping meta data structure
- * @gaddr: virtual address in the guest address space
- * @len: size of area
- *
- * Returns 0 if for each page in the given range a gmap mapping exists and
- * the invalidation notification could be set. If the gmap mapping is missing
- * for one or more pages -EFAULT is returned. If no memory could be allocated
- * -ENOMEM is returned. This function establishes missing page table entries.
+/*
+ * Test and reset if a guest page is dirty
  */
-int gmap_ipte_notify(struct gmap *gmap, unsigned long gaddr, unsigned long len)
+bool test_and_clear_guest_dirty(struct mm_struct *mm, unsigned long addr)
 {
-	unsigned long addr;
 	spinlock_t *ptl;
-	pte_t *ptep, entry;
 	pgste_t pgste;
-	int rc = 0;
-
-	if ((gaddr & ~PAGE_MASK) || (len & ~PAGE_MASK))
-		return -EINVAL;
-	down_read(&gmap->mm->mmap_sem);
-	while (len) {
-		/* Convert gmap address and connect the page tables */
-		addr = __gmap_translate(gmap, gaddr);
-		if (IS_ERR_VALUE(addr)) {
-			rc = addr;
-			break;
-		}
-		/* Get the page mapped */
-		if (fixup_user_fault(current, gmap->mm, addr, FAULT_FLAG_WRITE)) {
-			rc = -EFAULT;
-			break;
-		}
-		rc = __gmap_link(gmap, gaddr, addr);
-		if (rc)
-			break;
-		/* Walk the process page table, lock and get pte pointer */
-		ptep = get_locked_pte(gmap->mm, addr, &ptl);
-		VM_BUG_ON(!ptep);
-		/* Set notification bit in the pgste of the pte */
-		entry = *ptep;
-		if ((pte_val(entry) & (_PAGE_INVALID | _PAGE_PROTECT)) == 0) {
-			pgste = pgste_get_lock(ptep);
-			pgste_val(pgste) |= PGSTE_IN_BIT;
-			pgste_set_unlock(ptep, pgste);
-			gaddr += PAGE_SIZE;
-			len -= PAGE_SIZE;
-		}
-		pte_unmap_unlock(ptep, ptl);
-	}
-	up_read(&gmap->mm->mmap_sem);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(gmap_ipte_notify);
-
-/**
- * gmap_do_ipte_notify - call all invalidation callbacks for a specific pte.
- * @mm: pointer to the process mm_struct
- * @addr: virtual address in the process address space
- * @pte: pointer to the page table entry
- *
- * This function is assumed to be called with the page table lock held
- * for the pte to notify.
- */
-void gmap_do_ipte_notify(struct mm_struct *mm, unsigned long vmaddr, pte_t *pte)
-{
-	unsigned long offset, gaddr;
-	unsigned long *table;
-	struct gmap_notifier *nb;
-	struct gmap *gmap;
-
-	offset = ((unsigned long) pte) & (255 * sizeof(pte_t));
-	offset = offset * (4096 / sizeof(pte_t));
-	spin_lock(&gmap_notifier_lock);
-	list_for_each_entry(gmap, &mm->context.gmap_list, list) {
-		table = radix_tree_lookup(&gmap->host_to_guest,
-					  vmaddr >> PMD_SHIFT);
-		if (!table)
-			continue;
-		gaddr = __gmap_segment_gaddr(table) + offset;
-		list_for_each_entry(nb, &gmap_notifier_list, list)
-			nb->notifier_call(gmap, gaddr);
+	pte_t *ptep;
+	pte_t pte;
+	bool dirty;
+
+	ptep = get_locked_pte(mm, addr, &ptl);
+	if (unlikely(!ptep))
+		return false;
+
+	pgste = pgste_get_lock(ptep);
+	dirty = !!(pgste_val(pgste) & PGSTE_UC_BIT);
+	pgste_val(pgste) &= ~PGSTE_UC_BIT;
+	pte = *ptep;
+	if (dirty && (pte_val(pte) & _PAGE_PRESENT)) {
+		pgste = pgste_ipte_notify(mm, addr, ptep, pgste);
+		__ptep_ipte(addr, ptep);
+		if (MACHINE_HAS_ESOP || !(pte_val(pte) & _PAGE_WRITE))
+			pte_val(pte) |= _PAGE_PROTECT;
+		else
+			pte_val(pte) |= _PAGE_INVALID;
+		*ptep = pte;
 	}
-	spin_unlock(&gmap_notifier_lock);
+	pgste_set_unlock(ptep, pgste);
+
+	spin_unlock(ptl);
+	return dirty;
 }
-EXPORT_SYMBOL_GPL(gmap_do_ipte_notify);
+EXPORT_SYMBOL_GPL(test_and_clear_guest_dirty);
 
 int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
-			  unsigned long key, bool nq)
+			  unsigned char key, bool nq)
 {
+	unsigned long keyul;
 	spinlock_t *ptl;
 	pgste_t old, new;
 	pte_t *ptep;
 
 	down_read(&mm->mmap_sem);
-retry:
 	ptep = get_locked_pte(mm, addr, &ptl);
 	if (unlikely(!ptep)) {
 		up_read(&mm->mmap_sem);
 		return -EFAULT;
 	}
-	if (!(pte_val(*ptep) & _PAGE_INVALID) &&
-	     (pte_val(*ptep) & _PAGE_PROTECT)) {
-		pte_unmap_unlock(ptep, ptl);
-		if (fixup_user_fault(current, mm, addr, FAULT_FLAG_WRITE)) {
-			up_read(&mm->mmap_sem);
-			return -EFAULT;
-		}
-		goto retry;
-	}
 
 	new = old = pgste_get_lock(ptep);
 	pgste_val(new) &= ~(PGSTE_GR_BIT | PGSTE_GC_BIT |
 			    PGSTE_ACC_BITS | PGSTE_FP_BIT);
-	pgste_val(new) |= (key & (_PAGE_CHANGED | _PAGE_REFERENCED)) << 48;
-	pgste_val(new) |= (key & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56;
+	keyul = (unsigned long) key;
+	pgste_val(new) |= (keyul & (_PAGE_CHANGED | _PAGE_REFERENCED)) << 48;
+	pgste_val(new) |= (keyul & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56;
 	if (!(pte_val(*ptep) & _PAGE_INVALID)) {
 		unsigned long address, bits, skey;
 
@@ -841,13 +543,12 @@ retry:
 }
 EXPORT_SYMBOL(set_guest_storage_key);
 
-unsigned long get_guest_storage_key(struct mm_struct *mm, unsigned long addr)
+unsigned char get_guest_storage_key(struct mm_struct *mm, unsigned long addr)
 {
+	unsigned char key;
 	spinlock_t *ptl;
 	pgste_t pgste;
 	pte_t *ptep;
-	uint64_t physaddr;
-	unsigned long key = 0;
 
 	down_read(&mm->mmap_sem);
 	ptep = get_locked_pte(mm, addr, &ptl);
@@ -858,13 +559,12 @@ unsigned long get_guest_storage_key(struct mm_struct *mm, unsigned long addr)
 	pgste = pgste_get_lock(ptep);
 
 	if (pte_val(*ptep) & _PAGE_INVALID) {
-		key |= (pgste_val(pgste) & PGSTE_ACC_BITS) >> 56;
+		key  = (pgste_val(pgste) & PGSTE_ACC_BITS) >> 56;
 		key |= (pgste_val(pgste) & PGSTE_FP_BIT) >> 56;
 		key |= (pgste_val(pgste) & PGSTE_GR_BIT) >> 48;
 		key |= (pgste_val(pgste) & PGSTE_GC_BIT) >> 48;
 	} else {
-		physaddr = pte_val(*ptep) & PAGE_MASK;
-		key = page_get_storage_key(physaddr);
+		key = page_get_storage_key(pte_val(*ptep) & PAGE_MASK);
 
 		/* Reflect guest's logical view, not physical */
 		if (pgste_val(pgste) & PGSTE_GR_BIT)
@@ -879,487 +579,4 @@ unsigned long get_guest_storage_key(struct mm_struct *mm, unsigned long addr)
 	return key;
 }
 EXPORT_SYMBOL(get_guest_storage_key);
-
-static int page_table_allocate_pgste_min = 0;
-static int page_table_allocate_pgste_max = 1;
-int page_table_allocate_pgste = 0;
-EXPORT_SYMBOL(page_table_allocate_pgste);
-
-static struct ctl_table page_table_sysctl[] = {
-	{
-		.procname	= "allocate_pgste",
-		.data		= &page_table_allocate_pgste,
-		.maxlen		= sizeof(int),
-		.mode		= S_IRUGO | S_IWUSR,
-		.proc_handler	= proc_dointvec,
-		.extra1		= &page_table_allocate_pgste_min,
-		.extra2		= &page_table_allocate_pgste_max,
-	},
-	{ }
-};
-
-static struct ctl_table page_table_sysctl_dir[] = {
-	{
-		.procname	= "vm",
-		.maxlen		= 0,
-		.mode		= 0555,
-		.child		= page_table_sysctl,
-	},
-	{ }
-};
-
-static int __init page_table_register_sysctl(void)
-{
-	return register_sysctl_table(page_table_sysctl_dir) ? 0 : -ENOMEM;
-}
-__initcall(page_table_register_sysctl);
-
-#else /* CONFIG_PGSTE */
-
-static inline void gmap_unlink(struct mm_struct *mm, unsigned long *table,
-			unsigned long vmaddr)
-{
-}
-
-#endif /* CONFIG_PGSTE */
-
-static inline unsigned int atomic_xor_bits(atomic_t *v, unsigned int bits)
-{
-	unsigned int old, new;
-
-	do {
-		old = atomic_read(v);
-		new = old ^ bits;
-	} while (atomic_cmpxchg(v, old, new) != old);
-	return new;
-}
-
-/*
- * page table entry allocation/free routines.
- */
-unsigned long *page_table_alloc(struct mm_struct *mm)
-{
-	unsigned long *table;
-	struct page *page;
-	unsigned int mask, bit;
-
-	/* Try to get a fragment of a 4K page as a 2K page table */
-	if (!mm_alloc_pgste(mm)) {
-		table = NULL;
-		spin_lock_bh(&mm->context.list_lock);
-		if (!list_empty(&mm->context.pgtable_list)) {
-			page = list_first_entry(&mm->context.pgtable_list,
-						struct page, lru);
-			mask = atomic_read(&page->_mapcount);
-			mask = (mask | (mask >> 4)) & 3;
-			if (mask != 3) {
-				table = (unsigned long *) page_to_phys(page);
-				bit = mask & 1;		/* =1 -> second 2K */
-				if (bit)
-					table += PTRS_PER_PTE;
-				atomic_xor_bits(&page->_mapcount, 1U << bit);
-				list_del(&page->lru);
-			}
-		}
-		spin_unlock_bh(&mm->context.list_lock);
-		if (table)
-			return table;
-	}
-	/* Allocate a fresh page */
-	page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
-	if (!page)
-		return NULL;
-	if (!pgtable_page_ctor(page)) {
-		__free_page(page);
-		return NULL;
-	}
-	/* Initialize page table */
-	table = (unsigned long *) page_to_phys(page);
-	if (mm_alloc_pgste(mm)) {
-		/* Return 4K page table with PGSTEs */
-		atomic_set(&page->_mapcount, 3);
-		clear_table(table, _PAGE_INVALID, PAGE_SIZE/2);
-		clear_table(table + PTRS_PER_PTE, 0, PAGE_SIZE/2);
-	} else {
-		/* Return the first 2K fragment of the page */
-		atomic_set(&page->_mapcount, 1);
-		clear_table(table, _PAGE_INVALID, PAGE_SIZE);
-		spin_lock_bh(&mm->context.list_lock);
-		list_add(&page->lru, &mm->context.pgtable_list);
-		spin_unlock_bh(&mm->context.list_lock);
-	}
-	return table;
-}
-
-void page_table_free(struct mm_struct *mm, unsigned long *table)
-{
-	struct page *page;
-	unsigned int bit, mask;
-
-	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
-	if (!mm_alloc_pgste(mm)) {
-		/* Free 2K page table fragment of a 4K page */
-		bit = (__pa(table) & ~PAGE_MASK)/(PTRS_PER_PTE*sizeof(pte_t));
-		spin_lock_bh(&mm->context.list_lock);
-		mask = atomic_xor_bits(&page->_mapcount, 1U << bit);
-		if (mask & 3)
-			list_add(&page->lru, &mm->context.pgtable_list);
-		else
-			list_del(&page->lru);
-		spin_unlock_bh(&mm->context.list_lock);
-		if (mask != 0)
-			return;
-	}
-
-	pgtable_page_dtor(page);
-	atomic_set(&page->_mapcount, -1);
-	__free_page(page);
-}
-
-void page_table_free_rcu(struct mmu_gather *tlb, unsigned long *table,
-			 unsigned long vmaddr)
-{
-	struct mm_struct *mm;
-	struct page *page;
-	unsigned int bit, mask;
-
-	mm = tlb->mm;
-	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
-	if (mm_alloc_pgste(mm)) {
-		gmap_unlink(mm, table, vmaddr);
-		table = (unsigned long *) (__pa(table) | 3);
-		tlb_remove_table(tlb, table);
-		return;
-	}
-	bit = (__pa(table) & ~PAGE_MASK) / (PTRS_PER_PTE*sizeof(pte_t));
-	spin_lock_bh(&mm->context.list_lock);
-	mask = atomic_xor_bits(&page->_mapcount, 0x11U << bit);
-	if (mask & 3)
-		list_add_tail(&page->lru, &mm->context.pgtable_list);
-	else
-		list_del(&page->lru);
-	spin_unlock_bh(&mm->context.list_lock);
-	table = (unsigned long *) (__pa(table) | (1U << bit));
-	tlb_remove_table(tlb, table);
-}
-
-static void __tlb_remove_table(void *_table)
-{
-	unsigned int mask = (unsigned long) _table & 3;
-	void *table = (void *)((unsigned long) _table ^ mask);
-	struct page *page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
-
-	switch (mask) {
-	case 0:		/* pmd or pud */
-		free_pages((unsigned long) table, 2);
-		break;
-	case 1:		/* lower 2K of a 4K page table */
-	case 2:		/* higher 2K of a 4K page table */
-		if (atomic_xor_bits(&page->_mapcount, mask << 4) != 0)
-			break;
-		/* fallthrough */
-	case 3:		/* 4K page table with pgstes */
-		pgtable_page_dtor(page);
-		atomic_set(&page->_mapcount, -1);
-		__free_page(page);
-		break;
-	}
-}
-
-static void tlb_remove_table_smp_sync(void *arg)
-{
-	/* Simply deliver the interrupt */
-}
-
-static void tlb_remove_table_one(void *table)
-{
-	/*
-	 * This isn't an RCU grace period and hence the page-tables cannot be
-	 * assumed to be actually RCU-freed.
-	 *
-	 * It is however sufficient for software page-table walkers that rely
-	 * on IRQ disabling. See the comment near struct mmu_table_batch.
-	 */
-	smp_call_function(tlb_remove_table_smp_sync, NULL, 1);
-	__tlb_remove_table(table);
-}
-
-static void tlb_remove_table_rcu(struct rcu_head *head)
-{
-	struct mmu_table_batch *batch;
-	int i;
-
-	batch = container_of(head, struct mmu_table_batch, rcu);
-
-	for (i = 0; i < batch->nr; i++)
-		__tlb_remove_table(batch->tables[i]);
-
-	free_page((unsigned long)batch);
-}
-
-void tlb_table_flush(struct mmu_gather *tlb)
-{
-	struct mmu_table_batch **batch = &tlb->batch;
-
-	if (*batch) {
-		call_rcu_sched(&(*batch)->rcu, tlb_remove_table_rcu);
-		*batch = NULL;
-	}
-}
-
-void tlb_remove_table(struct mmu_gather *tlb, void *table)
-{
-	struct mmu_table_batch **batch = &tlb->batch;
-
-	tlb->mm->context.flush_mm = 1;
-	if (*batch == NULL) {
-		*batch = (struct mmu_table_batch *)
-			__get_free_page(GFP_NOWAIT | __GFP_NOWARN);
-		if (*batch == NULL) {
-			__tlb_flush_mm_lazy(tlb->mm);
-			tlb_remove_table_one(table);
-			return;
-		}
-		(*batch)->nr = 0;
-	}
-	(*batch)->tables[(*batch)->nr++] = table;
-	if ((*batch)->nr == MAX_TABLE_BATCH)
-		tlb_flush_mmu(tlb);
-}
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline void thp_split_vma(struct vm_area_struct *vma)
-{
-	unsigned long addr;
-
-	for (addr = vma->vm_start; addr < vma->vm_end; addr += PAGE_SIZE)
-		follow_page(vma, addr, FOLL_SPLIT);
-}
-
-static inline void thp_split_mm(struct mm_struct *mm)
-{
-	struct vm_area_struct *vma;
-
-	for (vma = mm->mmap; vma != NULL; vma = vma->vm_next) {
-		thp_split_vma(vma);
-		vma->vm_flags &= ~VM_HUGEPAGE;
-		vma->vm_flags |= VM_NOHUGEPAGE;
-	}
-	mm->def_flags |= VM_NOHUGEPAGE;
-}
-#else
-static inline void thp_split_mm(struct mm_struct *mm)
-{
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
-
-/*
- * switch on pgstes for its userspace process (for kvm)
- */
-int s390_enable_sie(void)
-{
-	struct mm_struct *mm = current->mm;
-
-	/* Do we have pgstes? if yes, we are done */
-	if (mm_has_pgste(mm))
-		return 0;
-	/* Fail if the page tables are 2K */
-	if (!mm_alloc_pgste(mm))
-		return -EINVAL;
-	down_write(&mm->mmap_sem);
-	mm->context.has_pgste = 1;
-	/* split thp mappings and disable thp for future mappings */
-	thp_split_mm(mm);
-	up_write(&mm->mmap_sem);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(s390_enable_sie);
-
-/*
- * Enable storage key handling from now on and initialize the storage
- * keys with the default key.
- */
-static int __s390_enable_skey(pte_t *pte, unsigned long addr,
-			      unsigned long next, struct mm_walk *walk)
-{
-	unsigned long ptev;
-	pgste_t pgste;
-
-	pgste = pgste_get_lock(pte);
-	/*
-	 * Remove all zero page mappings,
-	 * after establishing a policy to forbid zero page mappings
-	 * following faults for that page will get fresh anonymous pages
-	 */
-	if (is_zero_pfn(pte_pfn(*pte))) {
-		ptep_flush_direct(walk->mm, addr, pte);
-		pte_val(*pte) = _PAGE_INVALID;
-	}
-	/* Clear storage key */
-	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT |
-			      PGSTE_GR_BIT | PGSTE_GC_BIT);
-	ptev = pte_val(*pte);
-	if (!(ptev & _PAGE_INVALID) && (ptev & _PAGE_WRITE))
-		page_set_storage_key(ptev & PAGE_MASK, PAGE_DEFAULT_KEY, 1);
-	pgste_set_unlock(pte, pgste);
-	return 0;
-}
-
-int s390_enable_skey(void)
-{
-	struct mm_walk walk = { .pte_entry = __s390_enable_skey };
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	int rc = 0;
-
-	down_write(&mm->mmap_sem);
-	if (mm_use_skey(mm))
-		goto out_up;
-
-	mm->context.use_skey = 1;
-	for (vma = mm->mmap; vma; vma = vma->vm_next) {
-		if (ksm_madvise(vma, vma->vm_start, vma->vm_end,
-				MADV_UNMERGEABLE, &vma->vm_flags)) {
-			mm->context.use_skey = 0;
-			rc = -ENOMEM;
-			goto out_up;
-		}
-	}
-	mm->def_flags &= ~VM_MERGEABLE;
-
-	walk.mm = mm;
-	walk_page_range(0, TASK_SIZE, &walk);
-
-out_up:
-	up_write(&mm->mmap_sem);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(s390_enable_skey);
-
-/*
- * Reset CMMA state, make all pages stable again.
- */
-static int __s390_reset_cmma(pte_t *pte, unsigned long addr,
-			     unsigned long next, struct mm_walk *walk)
-{
-	pgste_t pgste;
-
-	pgste = pgste_get_lock(pte);
-	pgste_val(pgste) &= ~_PGSTE_GPS_USAGE_MASK;
-	pgste_set_unlock(pte, pgste);
-	return 0;
-}
-
-void s390_reset_cmma(struct mm_struct *mm)
-{
-	struct mm_walk walk = { .pte_entry = __s390_reset_cmma };
-
-	down_write(&mm->mmap_sem);
-	walk.mm = mm;
-	walk_page_range(0, TASK_SIZE, &walk);
-	up_write(&mm->mmap_sem);
-}
-EXPORT_SYMBOL_GPL(s390_reset_cmma);
-
-/*
- * Test and reset if a guest page is dirty
- */
-bool gmap_test_and_clear_dirty(unsigned long address, struct gmap *gmap)
-{
-	pte_t *pte;
-	spinlock_t *ptl;
-	bool dirty = false;
-
-	pte = get_locked_pte(gmap->mm, address, &ptl);
-	if (unlikely(!pte))
-		return false;
-
-	if (ptep_test_and_clear_user_dirty(gmap->mm, address, pte))
-		dirty = true;
-
-	spin_unlock(ptl);
-	return dirty;
-}
-EXPORT_SYMBOL_GPL(gmap_test_and_clear_dirty);
-
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-int pmdp_clear_flush_young(struct vm_area_struct *vma, unsigned long address,
-			   pmd_t *pmdp)
-{
-	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
-	/* No need to flush TLB
-	 * On s390 reference bits are in storage key and never in TLB */
-	return pmdp_test_and_clear_young(vma, address, pmdp);
-}
-
-int pmdp_set_access_flags(struct vm_area_struct *vma,
-			  unsigned long address, pmd_t *pmdp,
-			  pmd_t entry, int dirty)
-{
-	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
-
-	entry = pmd_mkyoung(entry);
-	if (dirty)
-		entry = pmd_mkdirty(entry);
-	if (pmd_same(*pmdp, entry))
-		return 0;
-	pmdp_invalidate(vma, address, pmdp);
-	set_pmd_at(vma->vm_mm, address, pmdp, entry);
-	return 1;
-}
-
-static void pmdp_splitting_flush_sync(void *arg)
-{
-	/* Simply deliver the interrupt */
-}
-
-void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
-			  pmd_t *pmdp)
-{
-	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
-	if (!test_and_set_bit(_SEGMENT_ENTRY_SPLIT_BIT,
-			      (unsigned long *) pmdp)) {
-		/* need to serialize against gup-fast (IRQ disabled) */
-		smp_call_function(pmdp_splitting_flush_sync, NULL, 1);
-	}
-}
-
-void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				pgtable_t pgtable)
-{
-	struct list_head *lh = (struct list_head *) pgtable;
-
-	assert_spin_locked(pmd_lockptr(mm, pmdp));
-
-	/* FIFO */
-	if (!pmd_huge_pte(mm, pmdp))
-		INIT_LIST_HEAD(lh);
-	else
-		list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp));
-	pmd_huge_pte(mm, pmdp) = pgtable;
-}
-
-pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
-{
-	struct list_head *lh;
-	pgtable_t pgtable;
-	pte_t *ptep;
-
-	assert_spin_locked(pmd_lockptr(mm, pmdp));
-
-	/* FIFO */
-	pgtable = pmd_huge_pte(mm, pmdp);
-	lh = (struct list_head *) pgtable;
-	if (list_empty(lh))
-		pmd_huge_pte(mm, pmdp) = NULL;
-	else {
-		pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next;
-		list_del(lh);
-	}
-	ptep = (pte_t *) pgtable;
-	pte_val(*ptep) = _PAGE_INVALID;
-	ptep++;
-	pte_val(*ptep) = _PAGE_INVALID;
-	return pgtable;
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+#endif
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index ef7d6c8fea66..d27fccbad7c1 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -94,16 +94,15 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 			pgd_populate(&init_mm, pg_dir, pu_dir);
 		}
 		pu_dir = pud_offset(pg_dir, address);
-#ifndef CONFIG_DEBUG_PAGEALLOC
 		if (MACHINE_HAS_EDAT2 && pud_none(*pu_dir) && address &&
-		    !(address & ~PUD_MASK) && (address + PUD_SIZE <= end)) {
+		    !(address & ~PUD_MASK) && (address + PUD_SIZE <= end) &&
+		     !debug_pagealloc_enabled()) {
 			pud_val(*pu_dir) = __pa(address) |
 				_REGION_ENTRY_TYPE_R3 | _REGION3_ENTRY_LARGE |
 				(ro ? _REGION_ENTRY_PROTECT : 0);
 			address += PUD_SIZE;
 			continue;
 		}
-#endif
 		if (pud_none(*pu_dir)) {
 			pm_dir = vmem_pmd_alloc();
 			if (!pm_dir)
@@ -111,9 +110,9 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 			pud_populate(&init_mm, pu_dir, pm_dir);
 		}
 		pm_dir = pmd_offset(pu_dir, address);
-#ifndef CONFIG_DEBUG_PAGEALLOC
 		if (MACHINE_HAS_EDAT1 && pmd_none(*pm_dir) && address &&
-		    !(address & ~PMD_MASK) && (address + PMD_SIZE <= end)) {
+		    !(address & ~PMD_MASK) && (address + PMD_SIZE <= end) &&
+		    !debug_pagealloc_enabled()) {
 			pmd_val(*pm_dir) = __pa(address) |
 				_SEGMENT_ENTRY | _SEGMENT_ENTRY_LARGE |
 				_SEGMENT_ENTRY_YOUNG |
@@ -121,7 +120,6 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro)
 			address += PMD_SIZE;
 			continue;
 		}
-#endif
 		if (pmd_none(*pm_dir)) {
 			pt_dir = vmem_pte_alloc(address);
 			if (!pt_dir)
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index 9a0c4c22e536..3c0bfc1f2694 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -408,7 +408,7 @@ static void emit_load_skb_data_hlen(struct bpf_jit *jit)
  * Save registers and create stack frame if necessary.
  * See stack frame layout desription in "bpf_jit.h"!
  */
-static void bpf_jit_prologue(struct bpf_jit *jit, bool is_classic)
+static void bpf_jit_prologue(struct bpf_jit *jit)
 {
 	if (jit->seen & SEEN_TAIL_CALL) {
 		/* xc STK_OFF_TCCNT(4,%r15),STK_OFF_TCCNT(%r15) */
@@ -448,15 +448,6 @@ static void bpf_jit_prologue(struct bpf_jit *jit, bool is_classic)
 		/* stg %b1,ST_OFF_SKBP(%r0,%r15) */
 		EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15,
 			      STK_OFF_SKBP);
-	/* Clear A (%b0) and X (%b7) registers for converted BPF programs */
-	if (is_classic) {
-		if (REG_SEEN(BPF_REG_A))
-			/* lghi %ba,0 */
-			EMIT4_IMM(0xa7090000, BPF_REG_A, 0);
-		if (REG_SEEN(BPF_REG_X))
-			/* lghi %bx,0 */
-			EMIT4_IMM(0xa7090000, BPF_REG_X, 0);
-	}
 }
 
 /*
@@ -1245,7 +1236,7 @@ static int bpf_jit_prog(struct bpf_jit *jit, struct bpf_prog *fp)
 	jit->lit = jit->lit_start;
 	jit->prg = 0;
 
-	bpf_jit_prologue(jit, bpf_prog_was_classic(fp));
+	bpf_jit_prologue(jit);
 	for (i = 0; i < fp->len; i += insn_count) {
 		insn_count = bpf_jit_insn(jit, fp, i);
 		if (insn_count < 0)
diff --git a/arch/s390/numa/numa.c b/arch/s390/numa/numa.c
index 43f32ce60aa3..2794845061c6 100644
--- a/arch/s390/numa/numa.c
+++ b/arch/s390/numa/numa.c
@@ -57,9 +57,7 @@ static __init pg_data_t *alloc_node_data(void)
 {
 	pg_data_t *res;
 
-	res = (pg_data_t *) memblock_alloc(sizeof(pg_data_t), 1);
-	if (!res)
-		panic("Could not allocate memory for node data!\n");
+	res = (pg_data_t *) memblock_alloc(sizeof(pg_data_t), 8);
 	memset(res, 0, sizeof(pg_data_t));
 	return res;
 }
@@ -162,7 +160,7 @@ static int __init numa_init_late(void)
 		register_one_node(nid);
 	return 0;
 }
-device_initcall(numa_init_late);
+arch_initcall(numa_init_late);
 
 static int __init parse_debug(char *parm)
 {
diff --git a/arch/s390/oprofile/Makefile b/arch/s390/oprofile/Makefile
index 1bd23017191e..496e4a7ee00e 100644
--- a/arch/s390/oprofile/Makefile
+++ b/arch/s390/oprofile/Makefile
@@ -6,5 +6,5 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
 		oprofilefs.o oprofile_stats.o  \
 		timer_int.o )
 
-oprofile-y :=	$(DRIVER_OBJS) init.o backtrace.o
+oprofile-y :=	$(DRIVER_OBJS) init.o
 oprofile-y +=	hwsampler.o
diff --git a/arch/s390/oprofile/backtrace.c b/arch/s390/oprofile/backtrace.c
deleted file mode 100644
index 8a6811b2cdb9..000000000000
--- a/arch/s390/oprofile/backtrace.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * S390 Version
- *   Copyright IBM Corp. 2005
- *   Author(s): Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
- */
-
-#include <linux/oprofile.h>
-
-#include <asm/processor.h> /* for struct stack_frame */
-
-static unsigned long
-__show_trace(unsigned int *depth, unsigned long sp,
-	     unsigned long low, unsigned long high)
-{
-	struct stack_frame *sf;
-	struct pt_regs *regs;
-
-	while (*depth) {
-		sp = sp & PSW_ADDR_INSN;
-		if (sp < low || sp > high - sizeof(*sf))
-			return sp;
-		sf = (struct stack_frame *) sp;
-		(*depth)--;
-		oprofile_add_trace(sf->gprs[8] & PSW_ADDR_INSN);
-
-		/* Follow the backchain.  */
-		while (*depth) {
-			low = sp;
-			sp = sf->back_chain & PSW_ADDR_INSN;
-			if (!sp)
-				break;
-			if (sp <= low || sp > high - sizeof(*sf))
-				return sp;
-			sf = (struct stack_frame *) sp;
-			(*depth)--;
-			oprofile_add_trace(sf->gprs[8] & PSW_ADDR_INSN);
-
-		}
-
-		if (*depth == 0)
-			break;
-
-		/* Zero backchain detected, check for interrupt frame.  */
-		sp = (unsigned long) (sf + 1);
-		if (sp <= low || sp > high - sizeof(*regs))
-			return sp;
-		regs = (struct pt_regs *) sp;
-		(*depth)--;
-		oprofile_add_trace(sf->gprs[8] & PSW_ADDR_INSN);
-		low = sp;
-		sp = regs->gprs[15];
-	}
-	return sp;
-}
-
-void s390_backtrace(struct pt_regs * const regs, unsigned int depth)
-{
-	unsigned long head;
-	struct stack_frame* head_sf;
-
-	if (user_mode(regs))
-		return;
-
-	head = regs->gprs[15];
-	head_sf = (struct stack_frame*)head;
-
-	if (!head_sf->back_chain)
-		return;
-
-	head = head_sf->back_chain;
-
-	head = __show_trace(&depth, head, S390_lowcore.async_stack - ASYNC_SIZE,
-			    S390_lowcore.async_stack);
-
-	__show_trace(&depth, head, S390_lowcore.thread_info,
-		     S390_lowcore.thread_info + THREAD_SIZE);
-}
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index 9cfa2ffaa9d6..791935a65800 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -20,8 +20,6 @@
 
 #include "../../../drivers/oprofile/oprof.h"
 
-extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth);
-
 #include "hwsampler.h"
 #include "op_counter.h"
 
@@ -456,6 +454,7 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops)
 		case 0x2097: case 0x2098: ops->cpu_type = "s390/z10"; break;
 		case 0x2817: case 0x2818: ops->cpu_type = "s390/z196"; break;
 		case 0x2827: case 0x2828: ops->cpu_type = "s390/zEC12"; break;
+		case 0x2964: case 0x2965: ops->cpu_type = "s390/z13"; break;
 		default: return -ENODEV;
 		}
 	}
@@ -494,6 +493,24 @@ static void oprofile_hwsampler_exit(void)
 	hwsampler_shutdown();
 }
 
+static int __s390_backtrace(void *data, unsigned long address)
+{
+	unsigned int *depth = data;
+
+	if (*depth == 0)
+		return 1;
+	(*depth)--;
+	oprofile_add_trace(address);
+	return 0;
+}
+
+static void s390_backtrace(struct pt_regs *regs, unsigned int depth)
+{
+	if (user_mode(regs))
+		return;
+	dump_trace(__s390_backtrace, &depth, NULL, regs->gprs[15]);
+}
+
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	ops->backtrace = s390_backtrace;
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 7ef12a3ace3a..871af75c69c2 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -68,9 +68,12 @@ static struct airq_struct zpci_airq = {
 	.isc = PCI_ISC,
 };
 
-/* I/O Map */
+#define ZPCI_IOMAP_ENTRIES						\
+	min(((unsigned long) CONFIG_PCI_NR_FUNCTIONS * PCI_BAR_COUNT),	\
+	    ZPCI_IOMAP_MAX_ENTRIES)
+
 static DEFINE_SPINLOCK(zpci_iomap_lock);
-static DECLARE_BITMAP(zpci_iomap, ZPCI_IOMAP_MAX_ENTRIES);
+static unsigned long *zpci_iomap_bitmap;
 struct zpci_iomap_entry *zpci_iomap_start;
 EXPORT_SYMBOL_GPL(zpci_iomap_start);
 
@@ -265,27 +268,20 @@ void __iomem *pci_iomap_range(struct pci_dev *pdev,
 			      unsigned long max)
 {
 	struct zpci_dev *zdev =	to_zpci(pdev);
-	u64 addr;
 	int idx;
 
-	if ((bar & 7) != bar)
+	if (!pci_resource_len(pdev, bar))
 		return NULL;
 
 	idx = zdev->bars[bar].map_idx;
 	spin_lock(&zpci_iomap_lock);
-	if (zpci_iomap_start[idx].count++) {
-		BUG_ON(zpci_iomap_start[idx].fh != zdev->fh ||
-		       zpci_iomap_start[idx].bar != bar);
-	} else {
-		zpci_iomap_start[idx].fh = zdev->fh;
-		zpci_iomap_start[idx].bar = bar;
-	}
 	/* Detect overrun */
-	BUG_ON(!zpci_iomap_start[idx].count);
+	WARN_ON(!++zpci_iomap_start[idx].count);
+	zpci_iomap_start[idx].fh = zdev->fh;
+	zpci_iomap_start[idx].bar = bar;
 	spin_unlock(&zpci_iomap_lock);
 
-	addr = ZPCI_IOMAP_ADDR_BASE | ((u64) idx << 48);
-	return (void __iomem *) addr + offset;
+	return (void __iomem *) ZPCI_ADDR(idx) + offset;
 }
 EXPORT_SYMBOL(pci_iomap_range);
 
@@ -297,12 +293,11 @@ EXPORT_SYMBOL(pci_iomap);
 
 void pci_iounmap(struct pci_dev *pdev, void __iomem *addr)
 {
-	unsigned int idx;
+	unsigned int idx = ZPCI_IDX(addr);
 
-	idx = (((__force u64) addr) & ~ZPCI_IOMAP_ADDR_BASE) >> 48;
 	spin_lock(&zpci_iomap_lock);
 	/* Detect underrun */
-	BUG_ON(!zpci_iomap_start[idx].count);
+	WARN_ON(!zpci_iomap_start[idx].count);
 	if (!--zpci_iomap_start[idx].count) {
 		zpci_iomap_start[idx].fh = 0;
 		zpci_iomap_start[idx].bar = 0;
@@ -544,15 +539,15 @@ static void zpci_irq_exit(void)
 
 static int zpci_alloc_iomap(struct zpci_dev *zdev)
 {
-	int entry;
+	unsigned long entry;
 
 	spin_lock(&zpci_iomap_lock);
-	entry = find_first_zero_bit(zpci_iomap, ZPCI_IOMAP_MAX_ENTRIES);
-	if (entry == ZPCI_IOMAP_MAX_ENTRIES) {
+	entry = find_first_zero_bit(zpci_iomap_bitmap, ZPCI_IOMAP_ENTRIES);
+	if (entry == ZPCI_IOMAP_ENTRIES) {
 		spin_unlock(&zpci_iomap_lock);
 		return -ENOSPC;
 	}
-	set_bit(entry, zpci_iomap);
+	set_bit(entry, zpci_iomap_bitmap);
 	spin_unlock(&zpci_iomap_lock);
 	return entry;
 }
@@ -561,7 +556,7 @@ static void zpci_free_iomap(struct zpci_dev *zdev, int entry)
 {
 	spin_lock(&zpci_iomap_lock);
 	memset(&zpci_iomap_start[entry], 0, sizeof(struct zpci_iomap_entry));
-	clear_bit(entry, zpci_iomap);
+	clear_bit(entry, zpci_iomap_bitmap);
 	spin_unlock(&zpci_iomap_lock);
 }
 
@@ -611,8 +606,7 @@ static int zpci_setup_bus_resources(struct zpci_dev *zdev,
 		if (zdev->bars[i].val & 4)
 			flags |= IORESOURCE_MEM_64;
 
-		addr = ZPCI_IOMAP_ADDR_BASE + ((u64) entry << 48);
-
+		addr = ZPCI_ADDR(entry);
 		size = 1UL << zdev->bars[i].size;
 
 		res = __alloc_res(zdev, addr, size, flags);
@@ -643,12 +637,11 @@ static void zpci_cleanup_bus_resources(struct zpci_dev *zdev)
 
 int pcibios_add_device(struct pci_dev *pdev)
 {
-	struct zpci_dev *zdev = to_zpci(pdev);
 	struct resource *res;
 	int i;
 
-	zdev->pdev = pdev;
 	pdev->dev.groups = zpci_attr_groups;
+	pdev->dev.archdata.dma_ops = &s390_pci_dma_ops;
 	zpci_map_resources(pdev);
 
 	for (i = 0; i < PCI_BAR_COUNT; i++) {
@@ -670,8 +663,7 @@ int pcibios_enable_device(struct pci_dev *pdev, int mask)
 {
 	struct zpci_dev *zdev = to_zpci(pdev);
 
-	zdev->pdev = pdev;
-	zpci_debug_init_device(zdev);
+	zpci_debug_init_device(zdev, dev_name(&pdev->dev));
 	zpci_fmb_enable_device(zdev);
 
 	return pci_enable_resources(pdev, mask);
@@ -683,7 +675,6 @@ void pcibios_disable_device(struct pci_dev *pdev)
 
 	zpci_fmb_disable_device(zdev);
 	zpci_debug_exit_device(zdev);
-	zdev->pdev = NULL;
 }
 
 #ifdef CONFIG_HIBERNATE_CALLBACKS
@@ -701,8 +692,7 @@ static int zpci_restore(struct device *dev)
 		goto out;
 
 	zpci_map_resources(pdev);
-	zpci_register_ioat(zdev, 0, zdev->start_dma + PAGE_OFFSET,
-			   zdev->start_dma + zdev->iommu_size - 1,
+	zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 			   (u64) zdev->dma_table);
 
 out:
@@ -871,26 +861,36 @@ static inline int barsize(u8 size)
 
 static int zpci_mem_init(void)
 {
+	BUILD_BUG_ON(!is_power_of_2(__alignof__(struct zpci_fmb)) ||
+		     __alignof__(struct zpci_fmb) < sizeof(struct zpci_fmb));
+
 	zdev_fmb_cache = kmem_cache_create("PCI_FMB_cache", sizeof(struct zpci_fmb),
-				16, 0, NULL);
+					   __alignof__(struct zpci_fmb), 0, NULL);
 	if (!zdev_fmb_cache)
-		goto error_zdev;
+		goto error_fmb;
 
-	/* TODO: use realloc */
-	zpci_iomap_start = kzalloc(ZPCI_IOMAP_MAX_ENTRIES * sizeof(*zpci_iomap_start),
-				   GFP_KERNEL);
+	zpci_iomap_start = kcalloc(ZPCI_IOMAP_ENTRIES,
+				   sizeof(*zpci_iomap_start), GFP_KERNEL);
 	if (!zpci_iomap_start)
 		goto error_iomap;
-	return 0;
 
+	zpci_iomap_bitmap = kcalloc(BITS_TO_LONGS(ZPCI_IOMAP_ENTRIES),
+				    sizeof(*zpci_iomap_bitmap), GFP_KERNEL);
+	if (!zpci_iomap_bitmap)
+		goto error_iomap_bitmap;
+
+	return 0;
+error_iomap_bitmap:
+	kfree(zpci_iomap_start);
 error_iomap:
 	kmem_cache_destroy(zdev_fmb_cache);
-error_zdev:
+error_fmb:
 	return -ENOMEM;
 }
 
 static void zpci_mem_exit(void)
 {
+	kfree(zpci_iomap_bitmap);
 	kfree(zpci_iomap_start);
 	kmem_cache_destroy(zdev_fmb_cache);
 }
diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c
index d6e411ed8b1f..1a4512c8544a 100644
--- a/arch/s390/pci/pci_clp.c
+++ b/arch/s390/pci/pci_clp.c
@@ -8,13 +8,19 @@
 #define KMSG_COMPONENT "zpci"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/compat.h>
 #include <linux/kernel.h>
+#include <linux/miscdevice.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/uaccess.h>
 #include <asm/pci_debug.h>
 #include <asm/pci_clp.h>
+#include <asm/compat.h>
+#include <asm/clp.h>
+#include <uapi/asm/clp.h>
 
 static inline void zpci_err_clp(unsigned int rsp, int rc)
 {
@@ -27,21 +33,43 @@ static inline void zpci_err_clp(unsigned int rsp, int rc)
 }
 
 /*
- * Call Logical Processor
- * Retry logic is handled by the caller.
+ * Call Logical Processor with c=1, lps=0 and command 1
+ * to get the bit mask of installed logical processors
  */
-static inline u8 clp_instr(void *data)
+static inline int clp_get_ilp(unsigned long *ilp)
+{
+	unsigned long mask;
+	int cc = 3;
+
+	asm volatile (
+		"	.insn	rrf,0xb9a00000,%[mask],%[cmd],8,0\n"
+		"0:	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		"1:\n"
+		EX_TABLE(0b, 1b)
+		: [cc] "+d" (cc), [mask] "=d" (mask) : [cmd] "a" (1)
+		: "cc");
+	*ilp = mask;
+	return cc;
+}
+
+/*
+ * Call Logical Processor with c=0, the give constant lps and an lpcb request.
+ */
+static inline int clp_req(void *data, unsigned int lps)
 {
 	struct { u8 _[CLP_BLK_SIZE]; } *req = data;
 	u64 ignored;
-	u8 cc;
+	int cc = 3;
 
 	asm volatile (
-		"	.insn	rrf,0xb9a00000,%[ign],%[req],0x0,0x2\n"
-		"	ipm	%[cc]\n"
+		"	.insn	rrf,0xb9a00000,%[ign],%[req],0,%[lps]\n"
+		"0:	ipm	%[cc]\n"
 		"	srl	%[cc],28\n"
-		: [cc] "=d" (cc), [ign] "=d" (ignored), "+m" (*req)
-		: [req] "a" (req)
+		"1:\n"
+		EX_TABLE(0b, 1b)
+		: [cc] "+d" (cc), [ign] "=d" (ignored), "+m" (*req)
+		: [req] "a" (req), [lps] "i" (lps)
 		: "cc");
 	return cc;
 }
@@ -90,7 +118,7 @@ static int clp_query_pci_fngrp(struct zpci_dev *zdev, u8 pfgid)
 	rrb->response.hdr.len = sizeof(rrb->response);
 	rrb->request.pfgid = pfgid;
 
-	rc = clp_instr(rrb);
+	rc = clp_req(rrb, CLP_LPS_PCI);
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK)
 		clp_store_query_pci_fngrp(zdev, &rrb->response);
 	else {
@@ -143,13 +171,12 @@ static int clp_query_pci_fn(struct zpci_dev *zdev, u32 fh)
 	rrb->response.hdr.len = sizeof(rrb->response);
 	rrb->request.fh = fh;
 
-	rc = clp_instr(rrb);
+	rc = clp_req(rrb, CLP_LPS_PCI);
 	if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) {
 		rc = clp_store_query_pci_fn(zdev, &rrb->response);
 		if (rc)
 			goto out;
-		if (rrb->response.pfgid)
-			rc = clp_query_pci_fngrp(zdev, rrb->response.pfgid);
+		rc = clp_query_pci_fngrp(zdev, rrb->response.pfgid);
 	} else {
 		zpci_err("Q PCI FN:\n");
 		zpci_err_clp(rrb->response.hdr.rsp, rc);
@@ -214,7 +241,7 @@ static int clp_set_pci_fn(u32 *fh, u8 nr_dma_as, u8 command)
 		rrb->request.oc = command;
 		rrb->request.ndas = nr_dma_as;
 
-		rc = clp_instr(rrb);
+		rc = clp_req(rrb, CLP_LPS_PCI);
 		if (rrb->response.hdr.rsp == CLP_RC_SETPCIFN_BUSY) {
 			retries--;
 			if (retries < 0)
@@ -280,7 +307,7 @@ static int clp_list_pci(struct clp_req_rsp_list_pci *rrb,
 		rrb->request.resume_token = resume_token;
 
 		/* Get PCI function handle list */
-		rc = clp_instr(rrb);
+		rc = clp_req(rrb, CLP_LPS_PCI);
 		if (rc || rrb->response.hdr.rsp != CLP_RC_OK) {
 			zpci_err("List PCI FN:\n");
 			zpci_err_clp(rrb->response.hdr.rsp, rc);
@@ -391,3 +418,198 @@ int clp_rescan_pci_devices_simple(void)
 	clp_free_block(rrb);
 	return rc;
 }
+
+static int clp_base_slpc(struct clp_req *req, struct clp_req_rsp_slpc *lpcb)
+{
+	unsigned long limit = PAGE_SIZE - sizeof(lpcb->request);
+
+	if (lpcb->request.hdr.len != sizeof(lpcb->request) ||
+	    lpcb->response.hdr.len > limit)
+		return -EINVAL;
+	return clp_req(lpcb, CLP_LPS_BASE) ? -EOPNOTSUPP : 0;
+}
+
+static int clp_base_command(struct clp_req *req, struct clp_req_hdr *lpcb)
+{
+	switch (lpcb->cmd) {
+	case 0x0001: /* store logical-processor characteristics */
+		return clp_base_slpc(req, (void *) lpcb);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int clp_pci_slpc(struct clp_req *req, struct clp_req_rsp_slpc *lpcb)
+{
+	unsigned long limit = PAGE_SIZE - sizeof(lpcb->request);
+
+	if (lpcb->request.hdr.len != sizeof(lpcb->request) ||
+	    lpcb->response.hdr.len > limit)
+		return -EINVAL;
+	return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0;
+}
+
+static int clp_pci_list(struct clp_req *req, struct clp_req_rsp_list_pci *lpcb)
+{
+	unsigned long limit = PAGE_SIZE - sizeof(lpcb->request);
+
+	if (lpcb->request.hdr.len != sizeof(lpcb->request) ||
+	    lpcb->response.hdr.len > limit)
+		return -EINVAL;
+	if (lpcb->request.reserved2 != 0)
+		return -EINVAL;
+	return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0;
+}
+
+static int clp_pci_query(struct clp_req *req,
+			 struct clp_req_rsp_query_pci *lpcb)
+{
+	unsigned long limit = PAGE_SIZE - sizeof(lpcb->request);
+
+	if (lpcb->request.hdr.len != sizeof(lpcb->request) ||
+	    lpcb->response.hdr.len > limit)
+		return -EINVAL;
+	if (lpcb->request.reserved2 != 0 || lpcb->request.reserved3 != 0)
+		return -EINVAL;
+	return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0;
+}
+
+static int clp_pci_query_grp(struct clp_req *req,
+			     struct clp_req_rsp_query_pci_grp *lpcb)
+{
+	unsigned long limit = PAGE_SIZE - sizeof(lpcb->request);
+
+	if (lpcb->request.hdr.len != sizeof(lpcb->request) ||
+	    lpcb->response.hdr.len > limit)
+		return -EINVAL;
+	if (lpcb->request.reserved2 != 0 || lpcb->request.reserved3 != 0 ||
+	    lpcb->request.reserved4 != 0)
+		return -EINVAL;
+	return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0;
+}
+
+static int clp_pci_command(struct clp_req *req, struct clp_req_hdr *lpcb)
+{
+	switch (lpcb->cmd) {
+	case 0x0001: /* store logical-processor characteristics */
+		return clp_pci_slpc(req, (void *) lpcb);
+	case 0x0002: /* list PCI functions */
+		return clp_pci_list(req, (void *) lpcb);
+	case 0x0003: /* query PCI function */
+		return clp_pci_query(req, (void *) lpcb);
+	case 0x0004: /* query PCI function group */
+		return clp_pci_query_grp(req, (void *) lpcb);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int clp_normal_command(struct clp_req *req)
+{
+	struct clp_req_hdr *lpcb;
+	void __user *uptr;
+	int rc;
+
+	rc = -EINVAL;
+	if (req->lps != 0 && req->lps != 2)
+		goto out;
+
+	rc = -ENOMEM;
+	lpcb = clp_alloc_block(GFP_KERNEL);
+	if (!lpcb)
+		goto out;
+
+	rc = -EFAULT;
+	uptr = (void __force __user *)(unsigned long) req->data_p;
+	if (copy_from_user(lpcb, uptr, PAGE_SIZE) != 0)
+		goto out_free;
+
+	rc = -EINVAL;
+	if (lpcb->fmt != 0 || lpcb->reserved1 != 0 || lpcb->reserved2 != 0)
+		goto out_free;
+
+	switch (req->lps) {
+	case 0:
+		rc = clp_base_command(req, lpcb);
+		break;
+	case 2:
+		rc = clp_pci_command(req, lpcb);
+		break;
+	}
+	if (rc)
+		goto out_free;
+
+	rc = -EFAULT;
+	if (copy_to_user(uptr, lpcb, PAGE_SIZE) != 0)
+		goto out_free;
+
+	rc = 0;
+
+out_free:
+	clp_free_block(lpcb);
+out:
+	return rc;
+}
+
+static int clp_immediate_command(struct clp_req *req)
+{
+	void __user *uptr;
+	unsigned long ilp;
+	int exists;
+
+	if (req->cmd > 1 || clp_get_ilp(&ilp) != 0)
+		return -EINVAL;
+
+	uptr = (void __force __user *)(unsigned long) req->data_p;
+	if (req->cmd == 0) {
+		/* Command code 0: test for a specific processor */
+		exists = test_bit_inv(req->lps, &ilp);
+		return put_user(exists, (int __user *) uptr);
+	}
+	/* Command code 1: return bit mask of installed processors */
+	return put_user(ilp, (unsigned long __user *) uptr);
+}
+
+static long clp_misc_ioctl(struct file *filp, unsigned int cmd,
+			   unsigned long arg)
+{
+	struct clp_req req;
+	void __user *argp;
+
+	if (cmd != CLP_SYNC)
+		return -EINVAL;
+
+	argp = is_compat_task() ? compat_ptr(arg) : (void __user *) arg;
+	if (copy_from_user(&req, argp, sizeof(req)))
+		return -EFAULT;
+	if (req.r != 0)
+		return -EINVAL;
+	return req.c ? clp_immediate_command(&req) : clp_normal_command(&req);
+}
+
+static int clp_misc_release(struct inode *inode, struct file *filp)
+{
+	return 0;
+}
+
+static const struct file_operations clp_misc_fops = {
+	.owner = THIS_MODULE,
+	.open = nonseekable_open,
+	.release = clp_misc_release,
+	.unlocked_ioctl = clp_misc_ioctl,
+	.compat_ioctl = clp_misc_ioctl,
+	.llseek = no_llseek,
+};
+
+static struct miscdevice clp_misc_device = {
+	.minor = MISC_DYNAMIC_MINOR,
+	.name = "clp",
+	.fops = &clp_misc_fops,
+};
+
+static int __init clp_misc_init(void)
+{
+	return misc_register(&clp_misc_device);
+}
+
+device_initcall(clp_misc_init);
diff --git a/arch/s390/pci/pci_debug.c b/arch/s390/pci/pci_debug.c
index 4129b0a5fd78..c555de3d12d6 100644
--- a/arch/s390/pci/pci_debug.c
+++ b/arch/s390/pci/pci_debug.c
@@ -128,10 +128,9 @@ static const struct file_operations debugfs_pci_perf_fops = {
 	.release = single_release,
 };
 
-void zpci_debug_init_device(struct zpci_dev *zdev)
+void zpci_debug_init_device(struct zpci_dev *zdev, const char *name)
 {
-	zdev->debugfs_dev = debugfs_create_dir(dev_name(&zdev->pdev->dev),
-					       debugfs_root);
+	zdev->debugfs_dev = debugfs_create_dir(name, debugfs_root);
 	if (IS_ERR(zdev->debugfs_dev))
 		zdev->debugfs_dev = NULL;
 
diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c
index 37d10f74425a..e595e89eac65 100644
--- a/arch/s390/pci/pci_dma.c
+++ b/arch/s390/pci/pci_dma.c
@@ -33,7 +33,7 @@ unsigned long *dma_alloc_cpu_table(void)
 		return NULL;
 
 	for (entry = table; entry < table + ZPCI_TABLE_ENTRIES; entry++)
-		*entry = ZPCI_TABLE_INVALID | ZPCI_TABLE_PROTECTED;
+		*entry = ZPCI_TABLE_INVALID;
 	return table;
 }
 
@@ -51,7 +51,7 @@ static unsigned long *dma_alloc_page_table(void)
 		return NULL;
 
 	for (entry = table; entry < table + ZPCI_PT_ENTRIES; entry++)
-		*entry = ZPCI_PTE_INVALID | ZPCI_TABLE_PROTECTED;
+		*entry = ZPCI_PTE_INVALID;
 	return table;
 }
 
@@ -95,7 +95,7 @@ static unsigned long *dma_get_page_table_origin(unsigned long *entry)
 	return pto;
 }
 
-static unsigned long *dma_walk_cpu_trans(unsigned long *rto, dma_addr_t dma_addr)
+unsigned long *dma_walk_cpu_trans(unsigned long *rto, dma_addr_t dma_addr)
 {
 	unsigned long *sto, *pto;
 	unsigned int rtx, sx, px;
@@ -114,20 +114,10 @@ static unsigned long *dma_walk_cpu_trans(unsigned long *rto, dma_addr_t dma_addr
 	return &pto[px];
 }
 
-void dma_update_cpu_trans(unsigned long *dma_table, void *page_addr,
-			  dma_addr_t dma_addr, int flags)
+void dma_update_cpu_trans(unsigned long *entry, void *page_addr, int flags)
 {
-	unsigned long *entry;
-
-	entry = dma_walk_cpu_trans(dma_table, dma_addr);
-	if (!entry) {
-		WARN_ON_ONCE(1);
-		return;
-	}
-
 	if (flags & ZPCI_PTE_INVALID) {
 		invalidate_pt_entry(entry);
-		return;
 	} else {
 		set_pt_pfaa(entry, page_addr);
 		validate_pt_entry(entry);
@@ -146,18 +136,25 @@ static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
 	u8 *page_addr = (u8 *) (pa & PAGE_MASK);
 	dma_addr_t start_dma_addr = dma_addr;
 	unsigned long irq_flags;
+	unsigned long *entry;
 	int i, rc = 0;
 
 	if (!nr_pages)
 		return -EINVAL;
 
 	spin_lock_irqsave(&zdev->dma_table_lock, irq_flags);
-	if (!zdev->dma_table)
+	if (!zdev->dma_table) {
+		rc = -EINVAL;
 		goto no_refresh;
+	}
 
 	for (i = 0; i < nr_pages; i++) {
-		dma_update_cpu_trans(zdev->dma_table, page_addr, dma_addr,
-				     flags);
+		entry = dma_walk_cpu_trans(zdev->dma_table, dma_addr);
+		if (!entry) {
+			rc = -ENOMEM;
+			goto undo_cpu_trans;
+		}
+		dma_update_cpu_trans(entry, page_addr, flags);
 		page_addr += PAGE_SIZE;
 		dma_addr += PAGE_SIZE;
 	}
@@ -176,6 +173,18 @@ static int dma_update_trans(struct zpci_dev *zdev, unsigned long pa,
 
 	rc = zpci_refresh_trans((u64) zdev->fh << 32, start_dma_addr,
 				nr_pages * PAGE_SIZE);
+undo_cpu_trans:
+	if (rc && ((flags & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID)) {
+		flags = ZPCI_PTE_INVALID;
+		while (i-- > 0) {
+			page_addr -= PAGE_SIZE;
+			dma_addr -= PAGE_SIZE;
+			entry = dma_walk_cpu_trans(zdev->dma_table, dma_addr);
+			if (!entry)
+				break;
+			dma_update_cpu_trans(entry, page_addr, flags);
+		}
+	}
 
 no_refresh:
 	spin_unlock_irqrestore(&zdev->dma_table_lock, irq_flags);
@@ -208,27 +217,29 @@ void dma_cleanup_tables(unsigned long *table)
 	dma_free_cpu_table(table);
 }
 
-static unsigned long __dma_alloc_iommu(struct zpci_dev *zdev,
+static unsigned long __dma_alloc_iommu(struct device *dev,
 				       unsigned long start, int size)
 {
+	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
 	unsigned long boundary_size;
 
-	boundary_size = ALIGN(dma_get_seg_boundary(&zdev->pdev->dev) + 1,
+	boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
 			      PAGE_SIZE) >> PAGE_SHIFT;
 	return iommu_area_alloc(zdev->iommu_bitmap, zdev->iommu_pages,
 				start, size, 0, boundary_size, 0);
 }
 
-static unsigned long dma_alloc_iommu(struct zpci_dev *zdev, int size)
+static unsigned long dma_alloc_iommu(struct device *dev, int size)
 {
+	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
 	unsigned long offset, flags;
 	int wrap = 0;
 
 	spin_lock_irqsave(&zdev->iommu_bitmap_lock, flags);
-	offset = __dma_alloc_iommu(zdev, zdev->next_bit, size);
+	offset = __dma_alloc_iommu(dev, zdev->next_bit, size);
 	if (offset == -1) {
 		/* wrap-around */
-		offset = __dma_alloc_iommu(zdev, 0, size);
+		offset = __dma_alloc_iommu(dev, 0, size);
 		wrap = 1;
 	}
 
@@ -242,8 +253,9 @@ static unsigned long dma_alloc_iommu(struct zpci_dev *zdev, int size)
 	return offset;
 }
 
-static void dma_free_iommu(struct zpci_dev *zdev, unsigned long offset, int size)
+static void dma_free_iommu(struct device *dev, unsigned long offset, int size)
 {
+	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
 	unsigned long flags;
 
 	spin_lock_irqsave(&zdev->iommu_bitmap_lock, flags);
@@ -260,6 +272,16 @@ out:
 	spin_unlock_irqrestore(&zdev->iommu_bitmap_lock, flags);
 }
 
+static inline void zpci_err_dma(unsigned long rc, unsigned long addr)
+{
+	struct {
+		unsigned long rc;
+		unsigned long addr;
+	} __packed data = {rc, addr};
+
+	zpci_err_hex(&data, sizeof(data));
+}
+
 static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
 				     unsigned long offset, size_t size,
 				     enum dma_data_direction direction,
@@ -270,33 +292,40 @@ static dma_addr_t s390_dma_map_pages(struct device *dev, struct page *page,
 	unsigned long pa = page_to_phys(page) + offset;
 	int flags = ZPCI_PTE_VALID;
 	dma_addr_t dma_addr;
+	int ret;
 
 	/* This rounds up number of pages based on size and offset */
 	nr_pages = iommu_num_pages(pa, size, PAGE_SIZE);
-	iommu_page_index = dma_alloc_iommu(zdev, nr_pages);
-	if (iommu_page_index == -1)
+	iommu_page_index = dma_alloc_iommu(dev, nr_pages);
+	if (iommu_page_index == -1) {
+		ret = -ENOSPC;
 		goto out_err;
+	}
 
 	/* Use rounded up size */
 	size = nr_pages * PAGE_SIZE;
 
 	dma_addr = zdev->start_dma + iommu_page_index * PAGE_SIZE;
-	if (dma_addr + size > zdev->end_dma)
+	if (dma_addr + size > zdev->end_dma) {
+		ret = -ERANGE;
 		goto out_free;
+	}
 
 	if (direction == DMA_NONE || direction == DMA_TO_DEVICE)
 		flags |= ZPCI_TABLE_PROTECTED;
 
-	if (!dma_update_trans(zdev, pa, dma_addr, size, flags)) {
-		atomic64_add(nr_pages, &zdev->mapped_pages);
-		return dma_addr + (offset & ~PAGE_MASK);
-	}
+	ret = dma_update_trans(zdev, pa, dma_addr, size, flags);
+	if (ret)
+		goto out_free;
+
+	atomic64_add(nr_pages, &zdev->mapped_pages);
+	return dma_addr + (offset & ~PAGE_MASK);
 
 out_free:
-	dma_free_iommu(zdev, iommu_page_index, nr_pages);
+	dma_free_iommu(dev, iommu_page_index, nr_pages);
 out_err:
 	zpci_err("map error:\n");
-	zpci_err_hex(&pa, sizeof(pa));
+	zpci_err_dma(ret, pa);
 	return DMA_ERROR_CODE;
 }
 
@@ -306,19 +335,21 @@ static void s390_dma_unmap_pages(struct device *dev, dma_addr_t dma_addr,
 {
 	struct zpci_dev *zdev = to_zpci(to_pci_dev(dev));
 	unsigned long iommu_page_index;
-	int npages;
+	int npages, ret;
 
 	npages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	dma_addr = dma_addr & PAGE_MASK;
-	if (dma_update_trans(zdev, 0, dma_addr, npages * PAGE_SIZE,
-			     ZPCI_TABLE_PROTECTED | ZPCI_PTE_INVALID)) {
+	ret = dma_update_trans(zdev, 0, dma_addr, npages * PAGE_SIZE,
+			       ZPCI_PTE_INVALID);
+	if (ret) {
 		zpci_err("unmap error:\n");
-		zpci_err_hex(&dma_addr, sizeof(dma_addr));
+		zpci_err_dma(ret, dma_addr);
+		return;
 	}
 
 	atomic64_add(npages, &zdev->unmapped_pages);
 	iommu_page_index = (dma_addr - zdev->start_dma) >> PAGE_SHIFT;
-	dma_free_iommu(zdev, iommu_page_index, npages);
+	dma_free_iommu(dev, iommu_page_index, npages);
 }
 
 static void *s390_dma_alloc(struct device *dev, size_t size,
@@ -338,8 +369,7 @@ static void *s390_dma_alloc(struct device *dev, size_t size,
 	pa = page_to_phys(page);
 	memset((void *) pa, 0, size);
 
-	map = s390_dma_map_pages(dev, page, pa % PAGE_SIZE,
-				 size, DMA_BIDIRECTIONAL, NULL);
+	map = s390_dma_map_pages(dev, page, 0, size, DMA_BIDIRECTIONAL, NULL);
 	if (dma_mapping_error(dev, map)) {
 		free_pages(pa, get_order(size));
 		return NULL;
@@ -430,7 +460,19 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
 		goto out_clean;
 	}
 
-	zdev->iommu_size = (unsigned long) high_memory - PAGE_OFFSET;
+	/*
+	 * Restrict the iommu bitmap size to the minimum of the following:
+	 * - main memory size
+	 * - 3-level pagetable address limit minus start_dma offset
+	 * - DMA address range allowed by the hardware (clp query pci fn)
+	 *
+	 * Also set zdev->end_dma to the actual end address of the usable
+	 * range, instead of the theoretical maximum as reported by hardware.
+	 */
+	zdev->iommu_size = min3((u64) high_memory,
+				ZPCI_TABLE_SIZE_RT - zdev->start_dma,
+				zdev->end_dma - zdev->start_dma + 1);
+	zdev->end_dma = zdev->start_dma + zdev->iommu_size - 1;
 	zdev->iommu_pages = zdev->iommu_size >> PAGE_SHIFT;
 	zdev->iommu_bitmap = vzalloc(zdev->iommu_pages / 8);
 	if (!zdev->iommu_bitmap) {
@@ -438,10 +480,7 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
 		goto out_reg;
 	}
 
-	rc = zpci_register_ioat(zdev,
-				0,
-				zdev->start_dma + PAGE_OFFSET,
-				zdev->start_dma + zdev->iommu_size - 1,
+	rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				(u64) zdev->dma_table);
 	if (rc)
 		goto out_reg;
@@ -508,7 +547,7 @@ static int __init dma_debug_do_init(void)
 }
 fs_initcall(dma_debug_do_init);
 
-struct dma_map_ops s390_dma_ops = {
+struct dma_map_ops s390_pci_dma_ops = {
 	.alloc		= s390_dma_alloc,
 	.free		= s390_dma_free,
 	.map_sg		= s390_dma_map_sg,
@@ -519,7 +558,7 @@ struct dma_map_ops s390_dma_ops = {
 	.is_phys	= 0,
 	/* dma_supported is unconditionally true without a callback */
 };
-EXPORT_SYMBOL_GPL(s390_dma_ops);
+EXPORT_SYMBOL_GPL(s390_pci_dma_ops);
 
 static int __init s390_iommu_setup(char *str)
 {
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index 369a3e05d468..fb2a9a560fdc 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -46,13 +46,22 @@ struct zpci_ccdf_avail {
 static void __zpci_event_error(struct zpci_ccdf_err *ccdf)
 {
 	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
-	struct pci_dev *pdev = zdev ? zdev->pdev : NULL;
+	struct pci_dev *pdev = NULL;
 
 	zpci_err("error CCDF:\n");
 	zpci_err_hex(ccdf, sizeof(*ccdf));
 
+	if (zdev)
+		pdev = pci_get_slot(zdev->bus, ZPCI_DEVFN);
+
 	pr_err("%s: Event 0x%x reports an error for PCI function 0x%x\n",
 	       pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
+
+	if (!pdev)
+		return;
+
+	pdev->error_state = pci_channel_io_perm_failure;
+	pci_dev_put(pdev);
 }
 
 void zpci_event_error(void *data)
@@ -64,9 +73,12 @@ void zpci_event_error(void *data)
 static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 {
 	struct zpci_dev *zdev = get_zdev_by_fid(ccdf->fid);
-	struct pci_dev *pdev = zdev ? zdev->pdev : NULL;
+	struct pci_dev *pdev = NULL;
 	int ret;
 
+	if (zdev)
+		pdev = pci_get_slot(zdev->bus, ZPCI_DEVFN);
+
 	pr_info("%s: Event 0x%x reconfigured PCI function 0x%x\n",
 		pdev ? pci_name(pdev) : "n/a", ccdf->pec, ccdf->fid);
 	zpci_err("avail CCDF:\n");
@@ -133,6 +145,8 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 	default:
 		break;
 	}
+	if (pdev)
+		pci_dev_put(pdev);
 }
 
 void zpci_event_availability(void *data)
diff --git a/arch/s390/tools/.gitignore b/arch/s390/tools/.gitignore
new file mode 100644
index 000000000000..72a4b2cf1365
--- /dev/null
+++ b/arch/s390/tools/.gitignore
@@ -0,0 +1 @@
+gen_facilities
diff --git a/arch/s390/tools/Makefile b/arch/s390/tools/Makefile
new file mode 100644
index 000000000000..6d9814c9df2b
--- /dev/null
+++ b/arch/s390/tools/Makefile
@@ -0,0 +1,15 @@
+#
+# Makefile for s390 specific build tools
+#
+
+hostprogs-y		    += gen_facilities
+HOSTCFLAGS_gen_facilities.o += -Wall $(LINUXINCLUDE)
+
+define filechk_facilities.h
+	$(obj)/gen_facilities
+endef
+
+$(obj)/gen_facilities.o: $(srctree)/arch/s390/tools/gen_facilities.c
+
+include/generated/facilities.h: $(obj)/gen_facilities FORCE
+	$(call filechk,facilities.h)
diff --git a/arch/s390/tools/gen_facilities.c b/arch/s390/tools/gen_facilities.c
new file mode 100644
index 000000000000..e2660d27889b
--- /dev/null
+++ b/arch/s390/tools/gen_facilities.c
@@ -0,0 +1,67 @@
+/*
+ * Simple program to generate defines out of facility lists that use the bit
+ * numbering scheme from the Princples of Operations: most significant bit
+ * has bit number 0.
+ *
+ *    Copyright IBM Corp. 2015
+ *
+ */
+
+#define S390_GEN_FACILITIES_C
+
+#include <strings.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <asm/facilities_src.h>
+
+static void print_facility_list(struct facility_def *def)
+{
+	unsigned int high, bit, dword, i;
+	unsigned long long *array;
+
+	array = calloc(1, 8);
+	if (!array)
+		exit(EXIT_FAILURE);
+	high = 0;
+	for (i = 0; def->bits[i] != -1; i++) {
+		bit = 63 - (def->bits[i] & 63);
+		dword = def->bits[i] / 64;
+		if (dword > high) {
+			array = realloc(array, (dword + 1) * 8);
+			if (!array)
+				exit(EXIT_FAILURE);
+			memset(array + high + 1, 0, (dword - high) * 8);
+			high = dword;
+		}
+		array[dword] |= 1ULL << bit;
+	}
+	printf("#define %s ", def->name);
+	for (i = 0; i <= high; i++)
+		printf("_AC(0x%016llx,UL)%c", array[i], i < high ? ',' : '\n');
+	printf("#define %s_DWORDS %d\n", def->name, high + 1);
+	free(array);
+}
+
+static void print_facility_lists(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < sizeof(facility_defs) / sizeof(facility_defs[0]); i++)
+		print_facility_list(&facility_defs[i]);
+}
+
+int main(int argc, char **argv)
+{
+	printf("#ifndef __ASM_S390_FACILITIES__\n");
+	printf("#define __ASM_S390_FACILITIES__\n");
+	printf("/*\n");
+	printf(" * DO NOT MODIFY.\n");
+	printf(" *\n");
+	printf(" * This file was generated by %s\n", __FILE__);
+	printf(" */\n\n");
+	printf("#include <linux/const.h>\n\n");
+	print_facility_lists();
+	printf("\n#endif\n");
+	return 0;
+}
diff --git a/arch/score/configs/spct6600_defconfig b/arch/score/configs/spct6600_defconfig
index df1edbf507a2..b2d8802f43b4 100644
--- a/arch/score/configs/spct6600_defconfig
+++ b/arch/score/configs/spct6600_defconfig
@@ -70,7 +70,6 @@ CONFIG_NFSD=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_CRYPTO_NULL=y
diff --git a/arch/score/include/asm/checksum.h b/arch/score/include/asm/checksum.h
index 961bd64015a8..539d9fd45d21 100644
--- a/arch/score/include/asm/checksum.h
+++ b/arch/score/include/asm/checksum.h
@@ -127,10 +127,10 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 }
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
-	unsigned long tmp = (ntohs(len) << 16) + proto * 256;
+	unsigned long tmp = (len + proto) << 8;
 	__asm__ __volatile__(
 		".set volatile\n\t"
 		"add\t%0, %0, %2\n\t"
@@ -161,8 +161,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
-		unsigned short proto, __wsum sum)
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len,
+		  __u8 proto, __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }
@@ -179,9 +179,8 @@ static inline unsigned short ip_compute_csum(const void *buff, int len)
 
 #define _HAVE_ARCH_IPV6_CSUM
 static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-				const struct in6_addr *daddr,
-				__u32 len, unsigned short proto,
-				__wsum sum)
+				      const struct in6_addr *daddr,
+				      __u32 len, __u8 proto, __wsum sum)
 {
 	__asm__ __volatile__(
 		".set\tvolatile\t\t\t# csum_ipv6_magic\n\t"
diff --git a/arch/score/kernel/setup.c b/arch/score/kernel/setup.c
index b48459afefdd..f3a0649ab521 100644
--- a/arch/score/kernel/setup.c
+++ b/arch/score/kernel/setup.c
@@ -101,7 +101,7 @@ static void __init resource_init(void)
 	res->name = "System RAM";
 	res->start = MEMORY_START;
 	res->end = MEMORY_START + MEMORY_SIZE - 1;
-	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 	request_resource(&iomem_resource, res);
 
 	request_resource(res, &code_resource);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index d514df7e04dd..7ed20fc3fc81 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -1,5 +1,6 @@
 config SUPERH
 	def_bool y
+	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_PATA_PLATFORM
 	select CLKDEV_LOOKUP
@@ -11,7 +12,6 @@ config SUPERH
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
 	select HAVE_PERF_EVENTS
 	select HAVE_DEBUG_BUGVERBOSE
 	select ARCH_HAVE_CUSTOM_GPIO_H
@@ -130,9 +130,6 @@ config STACKTRACE_SUPPORT
 config LOCKDEP_SUPPORT
 	def_bool y
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 config ARCH_HAS_ILOG2_U32
 	def_bool n
 
@@ -851,14 +848,10 @@ config PCI
 config PCI_DOMAINS
 	bool
 
-source "drivers/pci/pcie/Kconfig"
-
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
 endmenu
 
 menu "Executable file formats"
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
index 89963d13f930..5e52d5362292 100644
--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -6,6 +6,21 @@ config SOLUTION_ENGINE
 config SH_ALPHA_BOARD
 	bool
 
+config SH_DEVICE_TREE
+	bool "Board Described by Device Tree"
+	select OF
+	select OF_EARLY_FLATTREE
+	select CLKSRC_OF
+	select GENERIC_CALIBRATE_DELAY
+	help
+	  Select Board Described by Device Tree to build a kernel that
+	  does not hard-code any board-specific knowledge but instead uses
+	  a device tree blob provided by the boot-loader. You must enable
+	  drivers for any hardware you want to use separately. At this
+	  time, only boards based on the open-hardware J-Core processors
+	  have sufficient driver coverage to use this option; do not
+	  select it if you are using original SuperH hardware.
+
 config SH_SOLUTION_ENGINE
 	bool "SolutionEngine"
 	select SOLUTION_ENGINE
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 975a0f64ff20..cea300362035 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -15,3 +15,5 @@ obj-$(CONFIG_SH_TITAN)		+= board-titan.o
 obj-$(CONFIG_SH_SH7757LCR)	+= board-sh7757lcr.o
 obj-$(CONFIG_SH_APSH4A3A)	+= board-apsh4a3a.o
 obj-$(CONFIG_SH_APSH4AD0A)	+= board-apsh4ad0a.o
+
+obj-$(CONFIG_SH_DEVICE_TREE)	+= of-generic.o
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index cbd2a9f02a91..62c3b81300ed 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -27,10 +27,10 @@
 #include <linux/gpio.h>
 #include <linux/videodev2.h>
 #include <linux/sh_intc.h>
-#include <media/ov772x.h>
+#include <media/i2c/ov772x.h>
 #include <media/soc_camera.h>
-#include <media/soc_camera_platform.h>
-#include <media/sh_mobile_ceu.h>
+#include <linux/platform_data/media/soc_camera_platform.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
 #include <asm/io.h>
 #include <asm/clock.h>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index d531791f06ff..a9c0c07386fd 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -38,10 +38,10 @@
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <sound/simple_card.h>
-#include <media/sh_mobile_ceu.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <media/soc_camera.h>
-#include <media/tw9910.h>
-#include <media/mt9t112.h>
+#include <media/i2c/tw9910.h>
+#include <media/i2c/mt9t112.h>
 #include <asm/heartbeat.h>
 #include <asm/clock.h>
 #include <asm/suspend.h>
@@ -900,8 +900,8 @@ static struct platform_device irda_device = {
 	.resource       = irda_resources,
 };
 
-#include <media/ak881x.h>
-#include <media/sh_vou.h>
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
 
 static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 7d997cec09c5..6bd9230e64e3 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -27,9 +27,9 @@
 #include <linux/usb/r8a66597.h>
 #include <linux/videodev2.h>
 #include <linux/sh_intc.h>
-#include <media/rj54n1cb0c.h>
+#include <media/i2c/rj54n1cb0c.h>
 #include <media/soc_camera.h>
-#include <media/sh_mobile_ceu.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
 #include <asm/suspend.h>
 #include <asm/clock.h>
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 29b7c0dcfc51..7a04da3efce4 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -27,10 +27,10 @@
 #include <linux/videodev2.h>
 #include <linux/sh_intc.h>
 #include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/ov772x.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
+#include <media/i2c/ov772x.h>
 #include <media/soc_camera.h>
-#include <media/tw9910.h>
+#include <media/i2c/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
@@ -167,7 +167,7 @@ static struct mtd_partition migor_nand_flash_partitions[] = {
 static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
 				     unsigned int ctrl)
 {
-	struct nand_chip *chip = mtd->priv;
+	struct nand_chip *chip = mtd_to_nand(mtd);
 
 	if (cmd == NAND_CMD_NONE)
 		return;
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 4f6635a075f2..e0e1df136642 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -30,7 +30,7 @@
 #include <linux/sh_intc.h>
 #include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>
 #include <sound/simple_card.h>
 #include <asm/io.h>
@@ -534,8 +534,8 @@ static struct platform_device irda_device = {
 	.resource       = irda_resources,
 };
 
-#include <media/ak881x.h>
-#include <media/sh_vou.h>
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
 
 static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
new file mode 100644
index 000000000000..bf3a166a5407
--- /dev/null
+++ b/arch/sh/boards/of-generic.c
@@ -0,0 +1,196 @@
+/*
+ * SH generic board support, using device tree
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
+#include <linux/of_iommu.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/clk-provider.h>
+#include <asm/machvec.h>
+#include <asm/rtc.h>
+
+#ifdef CONFIG_SMP
+
+static void dummy_smp_setup(void)
+{
+}
+
+static void dummy_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+static void dummy_start_cpu(unsigned int cpu, unsigned long entry_point)
+{
+}
+
+static unsigned int dummy_smp_processor_id(void)
+{
+	return 0;
+}
+
+static void dummy_send_ipi(unsigned int cpu, unsigned int message)
+{
+}
+
+static struct plat_smp_ops dummy_smp_ops = {
+	.smp_setup		= dummy_smp_setup,
+	.prepare_cpus		= dummy_prepare_cpus,
+	.start_cpu		= dummy_start_cpu,
+	.smp_processor_id	= dummy_smp_processor_id,
+	.send_ipi		= dummy_send_ipi,
+	.cpu_die		= native_cpu_die,
+	.cpu_disable		= native_cpu_disable,
+	.play_dead		= native_play_dead,
+};
+
+extern const struct of_cpu_method __cpu_method_of_table[];
+const struct of_cpu_method __cpu_method_of_table_sentinel
+	__section(__cpu_method_of_table_end);
+
+static void sh_of_smp_probe(void)
+{
+	struct device_node *np = 0;
+	const char *method = 0;
+	const struct of_cpu_method *m = __cpu_method_of_table;
+
+	pr_info("SH generic board support: scanning for cpus\n");
+
+	init_cpu_possible(cpumask_of(0));
+
+	while ((np = of_find_node_by_type(np, "cpu"))) {
+		const __be32 *cell = of_get_property(np, "reg", NULL);
+		u64 id = -1;
+		if (cell) id = of_read_number(cell, of_n_addr_cells(np));
+		if (id < NR_CPUS) {
+			if (!method)
+				of_property_read_string(np, "enable-method", &method);
+			set_cpu_possible(id, true);
+			set_cpu_present(id, true);
+			__cpu_number_map[id] = id;
+			__cpu_logical_map[id] = id;
+		}
+	}
+	if (!method) {
+		np = of_find_node_by_name(NULL, "cpus");
+		of_property_read_string(np, "enable-method", &method);
+	}
+
+	pr_info("CPU enable method: %s\n", method);
+	if (method)
+		for (; m->method; m++)
+			if (!strcmp(m->method, method)) {
+				register_smp_ops(m->ops);
+				return;
+			}
+
+	register_smp_ops(&dummy_smp_ops);
+}
+
+#else
+
+static void sh_of_smp_probe(void)
+{
+}
+
+#endif
+
+static void noop(void)
+{
+}
+
+static int noopi(void)
+{
+	return 0;
+}
+
+static void __init sh_of_mem_reserve(void)
+{
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+}
+
+static void __init sh_of_time_init(void)
+{
+	pr_info("SH generic board support: scanning for clocksource devices\n");
+	clocksource_probe();
+}
+
+static void __init sh_of_setup(char **cmdline_p)
+{
+	unflatten_device_tree();
+
+	board_time_init = sh_of_time_init;
+
+	sh_mv.mv_name = of_flat_dt_get_machine_name();
+	if (!sh_mv.mv_name)
+		sh_mv.mv_name = "Unknown SH model";
+
+	sh_of_smp_probe();
+}
+
+static int sh_of_irq_demux(int irq)
+{
+	/* FIXME: eventually this should not be used at all;
+	 * the interrupt controller should set_handle_irq(). */
+	return irq;
+}
+
+static void __init sh_of_init_irq(void)
+{
+	pr_info("SH generic board support: scanning for interrupt controllers\n");
+	irqchip_init();
+}
+
+static int __init sh_of_clk_init(void)
+{
+#ifdef CONFIG_COMMON_CLK
+	/* Disabled pending move to COMMON_CLK framework. */
+	pr_info("SH generic board support: scanning for clk providers\n");
+	of_clk_init(NULL);
+#endif
+	return 0;
+}
+
+static struct sh_machine_vector __initmv sh_of_generic_mv = {
+	.mv_setup	= sh_of_setup,
+	.mv_name	= "devicetree", /* replaced by DT root's model */
+	.mv_irq_demux	= sh_of_irq_demux,
+	.mv_init_irq	= sh_of_init_irq,
+	.mv_clk_init	= sh_of_clk_init,
+	.mv_mode_pins	= noopi,
+	.mv_mem_init	= noop,
+	.mv_mem_reserve	= sh_of_mem_reserve,
+};
+
+struct sh_clk_ops;
+
+void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx)
+{
+}
+
+void __init plat_irq_setup(void)
+{
+}
+
+static int __init sh_of_device_init(void)
+{
+	pr_info("SH generic board support: populating platform devices\n");
+	if (of_have_populated_dt()) {
+		of_iommu_init();
+		of_platform_populate(NULL, of_default_bus_match_table,
+				     NULL, NULL);
+	} else {
+		pr_crit("Device tree not populated\n");
+	}
+	return 0;
+}
+arch_initcall_sync(sh_of_device_init);
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index 23bc849d9c64..6df826ee7316 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -48,7 +48,7 @@ ifeq ($(BITS),64)
 	lib1funcs-dir 	:= $(addsuffix $(BITS), $(lib1funcs-dir))
 endif
 
-KBUILD_CFLAGS += -I$(lib1funcs-dir)
+KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING
 
 $(addprefix $(obj)/,$(lib1funcs-y)): $(obj)/%: $(lib1funcs-dir)/% FORCE
 	$(call cmd,shipped)
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index aac452b26aa8..a319745a7b63 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -1,5 +1,6 @@
 
 generic-y += bitsperlong.h
+generic-y += clkdev.h
 generic-y += cputime.h
 generic-y += current.h
 generic-y += delay.h
diff --git a/arch/sh/include/asm/barrier.h b/arch/sh/include/asm/barrier.h
index bf91037db4e0..8a84e05adb2e 100644
--- a/arch/sh/include/asm/barrier.h
+++ b/arch/sh/include/asm/barrier.h
@@ -32,7 +32,7 @@
 #define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
 #endif
 
-#define smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
+#define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
 
 #include <asm-generic/barrier.h>
 
diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h
index 14b7ac2f0a07..9c84386d35cb 100644
--- a/arch/sh/include/asm/checksum_32.h
+++ b/arch/sh/include/asm/checksum_32.h
@@ -115,8 +115,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 }
 
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 #ifdef __LITTLE_ENDIAN__
@@ -142,8 +141,7 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
@@ -161,8 +159,7 @@ static inline __sum16 ip_compute_csum(const void *buff, int len)
 #define _HAVE_ARCH_IPV6_CSUM
 static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
+				      __u32 len, __u8 proto, __wsum sum)
 {
 	unsigned int __dummy;
 	__asm__("clrt\n\t"
diff --git a/arch/sh/include/asm/clkdev.h b/arch/sh/include/asm/clkdev.h
deleted file mode 100644
index c41901465fb0..000000000000
--- a/arch/sh/include/asm/clkdev.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  Copyright (C) 2010 Paul Mundt <lethal@linux-sh.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-
-#ifndef __CLKDEV__H_
-#define __CLKDEV__H_
-
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-
-#include <asm/clock.h>
-
-static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
-{
-	if (!slab_is_available())
-		return alloc_bootmem_low_pages(size);
-	else
-		return kzalloc(size, GFP_KERNEL);
-}
-
-#ifndef CONFIG_COMMON_CLK
-#define __clk_put(clk)
-#define __clk_get(clk) ({ 1; })
-#endif
-
-#endif /* __CLKDEV_H__ */
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
index f848dec9e483..2ed557b31bd9 100644
--- a/arch/sh/include/asm/cmpxchg-grb.h
+++ b/arch/sh/include/asm/cmpxchg-grb.h
@@ -23,6 +23,28 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
 	return retval;
 }
 
+static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN */
+		"   mov.w  @%1,   %0      \n\t" /* load  old value */
+		"   extu.w  %0,   %0      \n\t" /* extend as unsigned */
+		"   mov.w   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m),
+		  "+r"  (val)		/* inhibit r15 overloading */
+		:
+		: "memory" , "r0", "r1");
+
+	return retval;
+}
+
 static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
 {
 	unsigned long retval;
diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
index bd11f630414a..f88877257171 100644
--- a/arch/sh/include/asm/cmpxchg-irq.h
+++ b/arch/sh/include/asm/cmpxchg-irq.h
@@ -14,6 +14,17 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
 	return retval;
 }
 
+static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
 static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
 {
 	unsigned long flags, retval;
diff --git a/arch/sh/include/asm/cmpxchg-llsc.h b/arch/sh/include/asm/cmpxchg-llsc.h
index 47136661a203..fcfd32271bff 100644
--- a/arch/sh/include/asm/cmpxchg-llsc.h
+++ b/arch/sh/include/asm/cmpxchg-llsc.h
@@ -22,29 +22,8 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
 	return retval;
 }
 
-static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
-{
-	unsigned long retval;
-	unsigned long tmp;
-
-	__asm__ __volatile__ (
-		"1:					\n\t"
-		"movli.l	@%2, %0	! xchg_u8	\n\t"
-		"mov		%0, %1			\n\t"
-		"mov		%3, %0			\n\t"
-		"movco.l	%0, @%2			\n\t"
-		"bf		1b			\n\t"
-		"synco					\n\t"
-		: "=&z"(tmp), "=&r" (retval)
-		: "r" (m), "r" (val & 0xff)
-		: "t", "memory"
-	);
-
-	return retval;
-}
-
 static inline unsigned long
-__cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new)
+__cmpxchg_u32(volatile u32 *m, unsigned long old, unsigned long new)
 {
 	unsigned long retval;
 	unsigned long tmp;
@@ -68,4 +47,6 @@ __cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new)
 	return retval;
 }
 
+#include <asm/cmpxchg-xchg.h>
+
 #endif /* __ASM_SH_CMPXCHG_LLSC_H */
diff --git a/arch/sh/include/asm/cmpxchg-xchg.h b/arch/sh/include/asm/cmpxchg-xchg.h
new file mode 100644
index 000000000000..7219719c23a3
--- /dev/null
+++ b/arch/sh/include/asm/cmpxchg-xchg.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_SH_CMPXCHG_XCHG_H
+#define __ASM_SH_CMPXCHG_XCHG_H
+
+/*
+ * Copyright (C) 2016 Red Hat, Inc.
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See the
+ * file "COPYING" in the main directory of this archive for more details.
+ */
+#include <linux/bitops.h>
+#include <asm/byteorder.h>
+
+/*
+ * Portable implementations of 1 and 2 byte xchg using a 4 byte cmpxchg.
+ * Note: this header isn't self-contained: before including it, __cmpxchg_u32
+ * must be defined first.
+ */
+static inline u32 __xchg_cmpxchg(volatile void *ptr, u32 x, int size)
+{
+	int off = (unsigned long)ptr % sizeof(u32);
+	volatile u32 *p = ptr - off;
+#ifdef __BIG_ENDIAN
+	int bitoff = (sizeof(u32) - 1 - off) * BITS_PER_BYTE;
+#else
+	int bitoff = off * BITS_PER_BYTE;
+#endif
+	u32 bitmask = ((0x1 << size * BITS_PER_BYTE) - 1) << bitoff;
+	u32 oldv, newv;
+	u32 ret;
+
+	do {
+		oldv = READ_ONCE(*p);
+		ret = (oldv & bitmask) >> bitoff;
+		newv = (oldv & ~bitmask) | (x << bitoff);
+	} while (__cmpxchg_u32(p, oldv, newv) != oldv);
+
+	return ret;
+}
+
+static inline unsigned long xchg_u16(volatile u16 *m, unsigned long val)
+{
+	return __xchg_cmpxchg(m, val, sizeof *m);
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	return __xchg_cmpxchg(m, val, sizeof *m);
+}
+
+#endif /* __ASM_SH_CMPXCHG_XCHG_H */
diff --git a/arch/sh/include/asm/cmpxchg.h b/arch/sh/include/asm/cmpxchg.h
index 85c97b188d71..5225916c1057 100644
--- a/arch/sh/include/asm/cmpxchg.h
+++ b/arch/sh/include/asm/cmpxchg.h
@@ -27,6 +27,9 @@ extern void __xchg_called_with_bad_pointer(void);
 	case 4:						\
 		__xchg__res = xchg_u32(__xchg_ptr, x);	\
 		break;					\
+	case 2:						\
+		__xchg__res = xchg_u16(__xchg_ptr, x);	\
+		break;					\
 	case 1:						\
 		__xchg__res = xchg_u8(__xchg_ptr, x);	\
 		break;					\
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index a3745a3fe029..e11cf0c8206b 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -11,8 +11,6 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 
 #define DMA_ERROR_CODE 0
 
-#include <asm-generic/dma-mapping-common.h>
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction dir);
 
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index e343dbd02e41..644314f2b1ef 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -105,9 +105,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return channel ? 15 : 14;
 }
 
-/* generic DMA-mapping stuff */
-#include <asm-generic/pci-dma-compat.h>
-
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_PCI_H */
 
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
index 78b0d0f4b24b..c9f8bbdb1bf8 100644
--- a/arch/sh/include/asm/smp.h
+++ b/arch/sh/include/asm/smp.h
@@ -34,11 +34,6 @@ enum {
 DECLARE_PER_CPU(int, cpu_state);
 
 void smp_message_recv(unsigned int msg);
-void smp_timer_broadcast(const struct cpumask *mask);
-
-void local_timer_interrupt(void);
-void local_timer_setup(unsigned int cpu);
-void local_timer_stop(unsigned int cpu);
 
 void arch_send_call_function_single_ipi(int cpu);
 void arch_send_call_function_ipi_mask(const struct cpumask *mask);
@@ -69,6 +64,16 @@ static inline int hard_smp_processor_id(void)
 	return mp_ops->smp_processor_id();
 }
 
+struct of_cpu_method {
+	const char *method;
+	struct plat_smp_ops *ops;
+};
+
+#define CPU_METHOD_OF_DECLARE(name, _method, _ops)			\
+	static const struct of_cpu_method __cpu_method_of_table_##name	\
+		__used __section(__cpu_method_of_table)			\
+		= { .method = _method, .ops = _ops }
+
 #else
 
 #define hard_smp_processor_id()	(0)
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index b0a282d65f6a..358e3f516ef6 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -17,7 +17,7 @@
 
 #define mc_capable()    (1)
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+const struct cpumask *cpu_coregroup_mask(int cpu);
 
 extern cpumask_t cpu_core_map[NR_CPUS];
 
diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h
index 183a2f744251..eb0cf205176f 100644
--- a/arch/sh/include/mach-common/mach/magicpanelr2.h
+++ b/arch/sh/include/mach-common/mach/magicpanelr2.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_SH_MAGICPANELR2_H
 #define __ASM_SH_MAGICPANELR2_H
 
-#include <asm/gpio.h>
+#include <linux/gpio.h>
 
 #define __IO_PREFIX mpr2
 #include <asm/io_generic.h>
diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h
index e6820c86e8c7..47ebd5b5ed55 100644
--- a/arch/sh/include/uapi/asm/unistd_64.h
+++ b/arch/sh/include/uapi/asm/unistd_64.h
@@ -278,7 +278,7 @@
 #define __NR_fsetxattr		256
 #define __NR_getxattr		257
 #define __NR_lgetxattr		258
-#define __NR_fgetxattr		269
+#define __NR_fgetxattr		259
 #define __NR_listxattr		260
 #define __NR_llistxattr		261
 #define __NR_flistxattr		262
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 2ccf36c824c6..09040fd07d2e 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -46,6 +46,5 @@ obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
 
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
-obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
 ccflags-y := -Werror
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index 8525a671266f..786c0769b4c3 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -63,7 +63,6 @@ int __init __deprecated cpg_clk_init(void)
 	clk_add_alias("fck", "sh-mtu2", "peripheral_clk", NULL);
 	clk_add_alias("fck", "sh-cmt-16.0", "peripheral_clk", NULL);
 	clk_add_alias("fck", "sh-cmt-32.0", "peripheral_clk", NULL);
-	clk_add_alias("sci_ick", NULL, "peripheral_clk", NULL);
 
 	return ret;
 }
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index c8a4331d9b8d..a1505956ef28 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -144,9 +144,9 @@ ENTRY(exception_handler)
 	mov	#64,r8
 	cmp/hs	r8,r9
 	bt	interrupt_entry	! vec >= 64 is interrupt
-	mov	#32,r8
+	mov	#31,r8
 	cmp/hs	r8,r9
-	bt	trap_entry	! 64 > vec >= 32  is trap
+	bt	trap_entry	! 64 > vec >= 31  is trap
 
 	mov.l	4f,r8
 	mov	r9,r4
@@ -178,9 +178,9 @@ interrupt_entry:
 
 trap_entry:
 	mov	#0x30,r8
-	cmp/ge	r8,r9		! vector 0x20-0x2f is systemcall
+	cmp/ge	r8,r9		! vector 0x1f-0x2f is systemcall
 	bt	1f
-	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
+	mov     #0x1f,r9	! convert to unified SH2/3/4 trap number
 1:	
 	shll2	r9			! TRA
 	bra	system_call	! jump common systemcall entry
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c b/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
index 8638fba6cd7f..7e06e39b0958 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7264.c
@@ -115,7 +115,14 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
 
 	/* MSTP clocks */
-	CLKDEV_CON_ID("sci_ick", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP77]),
+	CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP77]),
 	CLKDEV_CON_ID("vdc3", &mstp_clks[MSTP74]),
 	CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
 	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c b/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
index f8a5c2abdfb3..663a97bed554 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7269.c
@@ -150,14 +150,14 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
 
 	/* MSTP clocks */
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP46]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP45]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP44]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP43]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP47]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP46]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP45]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP44]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP43]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP42]),
+	CLKDEV_ICK_ID("fck", "sh-sci.6", &mstp_clks[MSTP41]),
+	CLKDEV_ICK_ID("fck", "sh-sci.7", &mstp_clks[MSTP40]),
 	CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]),
 	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]),
 	CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]),
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
index 222742ddc0d6..da77a8ef4696 100644
--- a/arch/sh/kernel/cpu/sh2a/entry.S
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -109,9 +109,9 @@ ENTRY(exception_handler)
 	mov	#64,r8
 	cmp/hs	r8,r9
 	bt	interrupt_entry	! vec >= 64 is interrupt
-	mov	#32,r8
+	mov	#31,r8
 	cmp/hs	r8,r9
-	bt	trap_entry	! 64 > vec >= 32  is trap
+	bt	trap_entry	! 64 > vec >= 31  is trap
 
 	mov.l	4f,r8
 	mov	r9,r4
@@ -143,9 +143,9 @@ interrupt_entry:
 
 trap_entry:
 	mov	#0x30,r8
-	cmp/ge	r8,r9		! vector 0x20-0x2f is systemcall
+	cmp/ge	r8,r9		! vector 0x1f-0x2f is systemcall
 	bt	1f
-	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
+	mov     #0x1f,r9	! convert to unified SH2/3/4 trap number
 1:	
 	shll2	r9			! TRA
 	bra	system_call	! jump common systemcall entry
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 9edc06c02dcf..a907ee2388bf 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -232,10 +232,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
 	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
 
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP007]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP006]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP005]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP004]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP004]),
 
 	CLKDEV_CON_ID("sio0", &mstp_clks[MSTP003]),
 	CLKDEV_CON_ID("siof0", &mstp_clks[MSTP002]),
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index 955b9add7810..ac9854179dee 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -230,9 +230,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
 	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
 
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP007]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP006]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP005]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP007]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP006]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP005]),
 
 	CLKDEV_CON_ID("msiof0", &mstp_clks[MSTP002]),
 	CLKDEV_CON_ID("sbr0", &mstp_clks[MSTP001]),
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index ccbcab550df2..fe844222f3f6 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -267,12 +267,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]),
 	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]),
 
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
 
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[HWBLK_LCDC]),
 };
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
index 7f54bf2f453d..354dcac5e4cd 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c
@@ -194,12 +194,12 @@ static struct clk_lookup lookups[] = {
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh7734.0", &mstp_clks[MSTP030]),
 	CLKDEV_DEV_ID("i2c-sh7734.1", &mstp_clks[MSTP029]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP026]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP025]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP024]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP023]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP022]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP021]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP024]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP023]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP022]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP021]),
 	CLKDEV_CON_ID("hscif", &mstp_clks[MSTP019]),
 	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
 	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index e40ec2c97ad1..b10af2ae9f35 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -125,9 +125,9 @@ static struct clk_lookup lookups[] = {
 
 	CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP113]),
 	CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP114]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP112]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP111]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP110]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP112]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP111]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP110]),
 
 	CLKDEV_CON_ID("usb_fck", &mstp_clks[MSTP103]),
 	CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP102]),
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index 8eb6e62340c9..1aafd5496752 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -132,12 +132,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
 
 	/* MSTP32 clocks */
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP029]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP028]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP027]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP026]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP025]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP024]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
 
 	CLKDEV_CON_ID("ssi1_fck", &mstp_clks[MSTP021]),
 	CLKDEV_CON_ID("ssi0_fck", &mstp_clks[MSTP020]),
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index 5e50e7ebeff0..ac3dcfe5d303 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -139,12 +139,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
 
 	/* MSTP32 clocks */
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP029]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP028]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP027]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP026]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP025]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP024]),
+	CLKDEV_ICK_ID("fck", "sh-sci.5", &mstp_clks[MSTP029]),
+	CLKDEV_ICK_ID("fck", "sh-sci.4", &mstp_clks[MSTP028]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
 
 	CLKDEV_CON_ID("ssi3_fck", &mstp_clks[MSTP023]),
 	CLKDEV_CON_ID("ssi2_fck", &mstp_clks[MSTP022]),
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index 605221d1448a..b1bdbc3cbc21 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -114,10 +114,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
 
 	/* MSTP32 clocks */
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP027]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP026]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP025]),
-	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP024]),
+	CLKDEV_ICK_ID("fck", "sh-sci.3", &mstp_clks[MSTP027]),
+	CLKDEV_ICK_ID("fck", "sh-sci.2", &mstp_clks[MSTP026]),
+	CLKDEV_ICK_ID("fck", "sh-sci.1", &mstp_clks[MSTP025]),
+	CLKDEV_ICK_ID("fck", "sh-sci.0", &mstp_clks[MSTP024]),
 
 	CLKDEV_CON_ID("h8ex_fck", &mstp_clks[MSTP003]),
 	CLKDEV_CON_ID("csm_fck", &mstp_clks[MSTP002]),
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
index f617bcb734df..69b8a50310d9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
@@ -28,7 +28,7 @@ static struct plat_sci_port scif0_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.type           = PORT_SCIF,
-	.regtype        = SCIx_SH4_SCIF_REGTYPE,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
 };
 
 static struct resource scif0_resources[] = {
@@ -50,7 +50,7 @@ static struct plat_sci_port scif1_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.type           = PORT_SCIF,
-	.regtype        = SCIx_SH4_SCIF_REGTYPE,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
 };
 
 static struct resource scif1_resources[] = {
@@ -72,7 +72,7 @@ static struct plat_sci_port scif2_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.type           = PORT_SCIF,
-	.regtype        = SCIx_SH4_SCIF_REGTYPE,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
 };
 
 static struct resource scif2_resources[] = {
@@ -94,7 +94,7 @@ static struct plat_sci_port scif3_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.type           = PORT_SCIF,
-	.regtype        = SCIx_SH4_SCIF_REGTYPE,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
 };
 
 static struct resource scif3_resources[] = {
@@ -116,7 +116,7 @@ static struct plat_sci_port scif4_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.type           = PORT_SCIF,
-	.regtype        = SCIx_SH4_SCIF_REGTYPE,
+	.regtype        = SCIx_SH4_SCIF_BRG_REGTYPE,
 };
 
 static struct resource scif4_resources[] = {
@@ -138,7 +138,7 @@ static struct plat_sci_port scif5_platform_data = {
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.type           = PORT_SCIF,
-	.regtype		= SCIx_SH4_SCIF_REGTYPE,
+	.regtype	= SCIx_SH4_SCIF_BRG_REGTYPE,
 };
 
 static struct resource scif5_resources[] = {
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 4a298808789c..839612c8a0a0 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -73,8 +73,6 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
 
-	local_timer_setup(0);
-
 	BUILD_BUG_ON(SMP_MSG_NR >= 8);
 
 	for (i = 0; i < SMP_MSG_NR; i++)
diff --git a/arch/sh/kernel/cpu/sh5/unwind.c b/arch/sh/kernel/cpu/sh5/unwind.c
index 10aed41757fc..3a4fed406fc6 100644
--- a/arch/sh/kernel/cpu/sh5/unwind.c
+++ b/arch/sh/kernel/cpu/sh5/unwind.c
@@ -159,7 +159,7 @@ static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
 
 			/* Sign extend */
 			regcache[dest] =
-				((((s64)(u64)op >> 10) & 0xffff) << 54) >> 54;
+				sign_extend64((((u64)op >> 10) & 0xffff), 9);
 			break;
 		case (0xd0 >> 2): /* addi */
 		case (0xd4 >> 2): /* addi.l */
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 13047a4facd2..c001f782c5f1 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -268,20 +268,29 @@ debug_trap:
  *	Syscall #: R3
  *	Arguments #0 to #3: R4--R7
  *	Arguments #4 to #6: R0, R1, R2
- *	TRA: (number of arguments + ABI revision) x 4
+ *	TRA: See following table.
  *
- * This code also handles delegating other traps to the BIOS/gdb stub
- * according to:
- *
- * Trap number
  * (TRA>>2)	Purpose
  * --------	-------
  * 0x00-0x0f	original SH-3/4 syscall ABI (not in general use).
  * 0x10-0x1f	general SH-3/4 syscall ABI.
- * 0x20-0x2f	syscall ABI for SH-2 parts.
+ *      0x1f	unified SH-2/3/4 syscall ABI (preferred).
+ * 0x20-0x2f	original SH-2 syscall ABI.
  * 0x30-0x3f	debug traps used by the kernel.
  * 0x40-0xff	Not supported by all parts, so left unhandled.
  *
+ * For making system calls, any trap number in the range for the
+ * given cpu model may be used, but the unified trap number 0x1f is
+ * preferred for compatibility with all models.
+ *
+ * The low bits of the trap number were once documented as matching
+ * the number of arguments, but they were never actually used as such
+ * by the kernel. SH-2 originally used its own separate trap range
+ * because several hardware exceptions fell in the range used for the
+ * SH-3/4 syscall ABI.
+ *
+ * This code also handles delegating other traps to the BIOS/gdb stub.
+ *
  * Note: When we're first called, the TRA value must be shifted
  * right 2 bits in order to get the value that was used as the "trapa"
  * argument.
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 079d70e6d74b..38993e09ef03 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -212,13 +212,11 @@ static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing. We do this by using the
-	 *  probe_kernel_* functions.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine, or before SMP starts.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	/* read the text we want to modify */
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index 7db248936b60..974bc152cc84 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -66,6 +66,10 @@ ENTRY(_stext)
 	mov	#0, r0
 	ldc	r0, r6_bank
 #endif
+
+#ifdef CONFIG_OF
+	mov	r4, r12		! Store device tree blob pointer in r12
+#endif
 	
 	/*
 	 * Prefetch if possible to reduce cache miss penalty.
@@ -314,6 +318,12 @@ ENTRY(_stext)
 10:		
 #endif
 
+#ifdef CONFIG_OF
+	mov.l	8f, r0		! Make flat device tree available early.
+	jsr	@r0
+	 mov	r12, r4
+#endif
+
 	!			Additional CPU initialization
 	mov.l	6f, r0
 	jsr	@r0
@@ -339,6 +349,9 @@ ENTRY(stack_start)
 5:	.long	start_kernel
 6:	.long	cpu_init
 7:	.long	init_thread_union
+#if defined(CONFIG_OF)
+8:	.long	sh_fdt_init
+#endif
 
 #ifdef CONFIG_PMB
 .LPMB_ADDR:		.long	PMB_ADDR
diff --git a/arch/sh/kernel/localtimer.c b/arch/sh/kernel/localtimer.c
deleted file mode 100644
index cbb7d4636ec0..000000000000
--- a/arch/sh/kernel/localtimer.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Dummy local timer
- *
- * Copyright (C) 2008  Paul Mundt
- *
- * cloned from:
- *
- *  linux/arch/arm/mach-realview/localtimer.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
-#include <linux/clockchips.h>
-#include <linux/hardirq.h>
-#include <linux/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or SMP_MSG_TIMER
- */
-void local_timer_interrupt(void)
-{
-	struct clock_event_device *clk = this_cpu_ptr(&local_clockevent);
-
-	irq_enter();
-	clk->event_handler(clk);
-	irq_exit();
-}
-
-void local_timer_setup(unsigned int cpu)
-{
-	struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
-	clk->name		= "dummy_timer";
-	clk->features		= CLOCK_EVT_FEAT_ONESHOT |
-				  CLOCK_EVT_FEAT_PERIODIC |
-				  CLOCK_EVT_FEAT_DUMMY;
-	clk->rating		= 400;
-	clk->mult		= 1;
-	clk->broadcast		= smp_timer_broadcast;
-	clk->cpumask		= cpumask_of(cpu);
-
-	clockevents_register_device(clk);
-}
-
-void local_timer_stop(unsigned int cpu)
-{
-}
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 7cfd7f153966..4dca18347ee9 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -10,7 +10,7 @@
  *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
  *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
  *
  * ppc:
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index de19cfa768f2..5d34605b58b5 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -29,6 +29,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -78,17 +80,17 @@ static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
 
 static struct resource code_resource = {
 	.name = "Kernel code",
-	.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource data_resource = {
 	.name = "Kernel data",
-	.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 static struct resource bss_resource = {
 	.name	= "Kernel bss",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM,
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM,
 };
 
 unsigned long memory_start;
@@ -172,6 +174,7 @@ disable:
 #endif
 }
 
+#ifndef CONFIG_GENERIC_CALIBRATE_DELAY
 void calibrate_delay(void)
 {
 	struct clk *clk = clk_get(NULL, "cpu_clk");
@@ -187,6 +190,7 @@ void calibrate_delay(void)
 			 (loops_per_jiffy/(5000/HZ)) % 100,
 			 loops_per_jiffy);
 }
+#endif
 
 void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 						unsigned long end_pfn)
@@ -202,7 +206,7 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	res->name = "System RAM";
 	res->start = start;
 	res->end = end - 1;
-	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 	if (request_resource(&iomem_resource, res)) {
 		pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
@@ -238,6 +242,29 @@ void __init __weak plat_early_device_setup(void)
 {
 }
 
+#ifdef CONFIG_OF
+void __ref sh_fdt_init(phys_addr_t dt_phys)
+{
+	static int done = 0;
+	void *dt_virt;
+
+	/* Avoid calling an __init function on secondary cpus. */
+	if (done) return;
+
+	dt_virt = phys_to_virt(dt_phys);
+
+	if (!dt_virt || !early_init_dt_scan(dt_virt)) {
+		pr_crit("Error: invalid device tree blob"
+			" at physical address %p\n", (void *)dt_phys);
+
+		while (true)
+			cpu_relax();
+	}
+
+	done = 1;
+}
+#endif
+
 void __init setup_arch(char **cmdline_p)
 {
 	enable_mmu();
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index d77f2f6c7ff0..0b30b9dfc87f 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -34,6 +34,9 @@ DECLARE_EXPORT(__sdivsi3);
 DECLARE_EXPORT(__lshrsi3);
 DECLARE_EXPORT(__ashrsi3);
 DECLARE_EXPORT(__ashlsi3);
+DECLARE_EXPORT(__lshrsi3_r0);
+DECLARE_EXPORT(__ashrsi3_r0);
+DECLARE_EXPORT(__ashlsi3_r0);
 DECLARE_EXPORT(__ashiftrt_r4_6);
 DECLARE_EXPORT(__ashiftrt_r4_7);
 DECLARE_EXPORT(__ashiftrt_r4_8);
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index de6be008fc01..38e7860845db 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/atomic.h>
+#include <linux/clockchips.h>
 #include <asm/processor.h>
 #include <asm/mmu_context.h>
 #include <asm/smp.h>
@@ -141,16 +142,13 @@ int __cpu_disable(void)
 	migrate_irqs();
 
 	/*
-	 * Stop the local timer for this CPU.
-	 */
-	local_timer_stop(cpu);
-
-	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
 	 * from the vm mask set of all processes.
 	 */
 	flush_cache_all();
+#ifdef CONFIG_MMU
 	local_flush_tlb_all();
+#endif
 
 	clear_tasks_mm_cpumask(cpu);
 
@@ -183,8 +181,10 @@ asmlinkage void start_secondary(void)
 	atomic_inc(&mm->mm_count);
 	atomic_inc(&mm->mm_users);
 	current->active_mm = mm;
+#ifdef CONFIG_MMU
 	enter_lazy_tlb(mm, current);
 	local_flush_tlb_all();
+#endif
 
 	per_cpu_trap_init();
 
@@ -194,8 +194,6 @@ asmlinkage void start_secondary(void)
 
 	local_irq_enable();
 
-	/* Enable local timers */
-	local_timer_setup(cpu);
 	calibrate_delay();
 
 	smp_store_cpu_info(cpu);
@@ -203,7 +201,7 @@ asmlinkage void start_secondary(void)
 	set_cpu_online(cpu, true);
 	per_cpu(cpu_state, cpu) = CPU_ONLINE;
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 extern struct {
@@ -285,7 +283,8 @@ void arch_send_call_function_single_ipi(int cpu)
 	mp_ops->send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
 }
 
-void smp_timer_broadcast(const struct cpumask *mask)
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+void tick_broadcast(const struct cpumask *mask)
 {
 	int cpu;
 
@@ -296,9 +295,10 @@ void smp_timer_broadcast(const struct cpumask *mask)
 static void ipi_timer(void)
 {
 	irq_enter();
-	local_timer_interrupt();
+	tick_receive_broadcast();
 	irq_exit();
 }
+#endif
 
 void smp_message_recv(unsigned int msg)
 {
@@ -312,9 +312,11 @@ void smp_message_recv(unsigned int msg)
 	case SMP_MSG_FUNCTION_SINGLE:
 		generic_smp_call_function_single_interrupt();
 		break;
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 	case SMP_MSG_TIMER:
 		ipi_timer();
 		break;
+#endif
 	default:
 		printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n",
 		       smp_processor_id(), __func__, msg);
@@ -328,6 +330,8 @@ int setup_profiling_timer(unsigned int multiplier)
 	return 0;
 }
 
+#ifdef CONFIG_MMU
+
 static void flush_tlb_all_ipi(void *info)
 {
 	local_flush_tlb_all();
@@ -467,3 +471,5 @@ void flush_tlb_one(unsigned long asid, unsigned long vaddr)
 	smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1);
 	local_flush_tlb_one(asid, vaddr);
 }
+
+#endif
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 772caffba22f..c82912a61d74 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -21,7 +21,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 cpumask_t cpu_core_map[NR_CPUS];
 EXPORT_SYMBOL(cpu_core_map);
 
-static cpumask_t cpu_coregroup_map(unsigned int cpu)
+static cpumask_t cpu_coregroup_map(int cpu)
 {
 	/*
 	 * Presently all SH-X3 SMP cores are multi-cores, so just keep it
@@ -30,7 +30,7 @@ static cpumask_t cpu_coregroup_map(unsigned int cpu)
 	return *cpu_possible_mask;
 }
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+const struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return &cpu_core_map[cpu];
 }
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index 112ea11c030d..d208c27ccc67 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -101,7 +101,7 @@ static int generate_and_check_address(struct pt_regs *regs,
 	if (displacement_not_indexed) {
 		__s64 displacement;
 		displacement = (opcode >> 10) & 0x3ff;
-		displacement = ((displacement << 54) >> 54); /* sign extend */
+		displacement = sign_extend64(displacement, 9);
 		addr = (__u64)((__s64)base_address + (displacement << width_shift));
 	} else {
 		__u64 offset;
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index db88cbf9eafd..235a4101999f 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -39,6 +39,7 @@ SECTIONS
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 		_etext = .;		/* End of text section */
diff --git a/arch/sh/lib/ashlsi3.S b/arch/sh/lib/ashlsi3.S
index bd47e9b403a5..70a6434945ab 100644
--- a/arch/sh/lib/ashlsi3.S
+++ b/arch/sh/lib/ashlsi3.S
@@ -54,21 +54,38 @@ Boston, MA 02110-1301, USA.  */
 !
 ! (none)
 !
+! __ashlsi3_r0
+!
+! Entry:
+!
+! r4: Value to shift
+! r0: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+
+
 	.global	__ashlsi3
+	.global	__ashlsi3_r0
 	
 	.align	2
 __ashlsi3:
-	mov	#31,r0
-	and	r0,r5
+	mov	r5,r0
+	.align	2
+__ashlsi3_r0:
+	and	#31,r0
+	mov.l	r4,@-r15
+	mov	r0,r4
 	mova	ashlsi3_table,r0
-	mov.b	@(r0,r5),r5
-#ifdef __sh1__
-	add	r5,r0
+	mov.b	@(r0,r4),r4
+	add	r4,r0
 	jmp	@r0
-#else
-	braf	r5
-#endif
-	mov	r4,r0
+	mov.l	@r15+,r0
 
 	.align	2
 ashlsi3_table:
diff --git a/arch/sh/lib/ashrsi3.S b/arch/sh/lib/ashrsi3.S
index 6f3cf46b77c2..602599d80209 100644
--- a/arch/sh/lib/ashrsi3.S
+++ b/arch/sh/lib/ashrsi3.S
@@ -54,22 +54,37 @@ Boston, MA 02110-1301, USA.  */
 !
 ! (none)
 !
+! __ashrsi3_r0
+!
+! Entry:
+!
+! r4: Value to shift
+! r0: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
 
 	.global	__ashrsi3
+	.global	__ashrsi3_r0
 	
 	.align	2
 __ashrsi3:
-	mov	#31,r0
-	and	r0,r5
+	mov	r5,r0
+	.align	2
+__ashrsi3_r0:
+	and	#31,r0
+	mov.l	r4,@-r15
+	mov	r0,r4
 	mova	ashrsi3_table,r0
-	mov.b	@(r0,r5),r5
-#ifdef __sh1__
-	add	r5,r0
+	mov.b	@(r0,r4),r4
+	add	r4,r0
 	jmp	@r0
-#else
-	braf	r5
-#endif
-	mov	r4,r0
+	mov.l	@r15+,r0
 
 	.align	2
 ashrsi3_table:
diff --git a/arch/sh/lib/lshrsi3.S b/arch/sh/lib/lshrsi3.S
index 1e7aaa557130..f2a6959f526d 100644
--- a/arch/sh/lib/lshrsi3.S
+++ b/arch/sh/lib/lshrsi3.S
@@ -54,21 +54,37 @@ Boston, MA 02110-1301, USA.  */
 !
 ! (none)
 !
+! __lshrsi3_r0
+!
+! Entry:
+!
+! r0: Value to shift
+! r5: Shifts
+!
+! Exit:
+!
+! r0: Result
+!
+! Destroys:
+!
+! (none)
+!
 	.global	__lshrsi3
+	.global	__lshrsi3_r0
 	
 	.align	2
 __lshrsi3:
-	mov	#31,r0
-	and	r0,r5
+	mov	r5,r0
+	.align	2
+__lshrsi3_r0:
+	and	#31,r0
+	mov.l	r4,@-r15
+	mov	r0,r4
 	mova	lshrsi3_table,r0
-	mov.b	@(r0,r5),r5
-#ifdef __sh1__
-	add	r5,r0
+	mov.b	@(r0,r4),r4
+	add	r4,r0
 	jmp	@r0
-#else
-	braf	r5
-#endif
-	mov	r4,r0
+	mov.l	@r15+,r0
 
 	.align	2
 lshrsi3_table:
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 51d8f7f31d1d..58aaa4f33b81 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -241,7 +241,7 @@ static void sh4_flush_cache_page(void *args)
 		 */
 		map_coherent = (current_cpu_data.dcache.n_aliases &&
 			test_bit(PG_dcache_clean, &page->flags) &&
-			page_mapped(page));
+			page_mapcount(page));
 		if (map_coherent)
 			vaddr = kmap_coherent(page, address);
 		else
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index f770e3992620..e58cfbf45150 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -59,7 +59,7 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long vaddr, void *dst, const void *src,
 		       unsigned long len)
 {
-	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
 	    test_bit(PG_dcache_clean, &page->flags)) {
 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(vto, src, len);
@@ -78,7 +78,7 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 			 unsigned long vaddr, void *dst, const void *src,
 			 unsigned long len)
 {
-	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+	if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
 	    test_bit(PG_dcache_clean, &page->flags)) {
 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(dst, vfrom, len);
@@ -97,7 +97,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 
 	vto = kmap_atomic(to);
 
-	if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
+	if (boot_cpu_data.dcache.n_aliases && page_mapcount(from) &&
 	    test_bit(PG_dcache_clean, &from->flags)) {
 		vfrom = kmap_coherent(from, vaddr);
 		copy_page(vto, vfrom);
@@ -153,7 +153,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 	unsigned long addr = (unsigned long) page_address(page);
 
 	if (pages_do_alias(addr, vmaddr)) {
-		if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
+		if (boot_cpu_data.dcache.n_aliases && page_mapcount(page) &&
 		    test_bit(PG_dcache_clean, &page->flags)) {
 			void *kaddr;
 
diff --git a/arch/sh/mm/gup.c b/arch/sh/mm/gup.c
index e7af6a65baab..40fa6c8adc43 100644
--- a/arch/sh/mm/gup.c
+++ b/arch/sh/mm/gup.c
@@ -257,7 +257,7 @@ slow_irqon:
 		start += nr << PAGE_SHIFT;
 		pages += nr;
 
-		ret = get_user_pages_unlocked(current, mm, start,
+		ret = get_user_pages_unlocked(start,
 			(end - start) >> PAGE_SHIFT, write, 0, pages);
 
 		/* Have to be a bit careful with return values */
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index 6385f60209b6..cc948db74878 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -35,7 +35,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 		if (pud) {
 			pmd = pmd_alloc(mm, pud, addr);
 			if (pmd)
-				pte = pte_alloc_map(mm, NULL, pmd, addr);
+				pte = pte_alloc_map(mm, pmd, addr);
 		}
 	}
 
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index ec29e14ec5a8..bf25d7c79a2d 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -36,6 +36,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 
 	BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
 
+	preempt_disable();
 	pagefault_disable();
 
 	idx = FIX_CMAP_END -
@@ -64,4 +65,5 @@ void kunmap_coherent(void *kvaddr)
 	}
 
 	pagefault_enable();
+	preempt_enable();
 }
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 56442d2d7bbc..57ffaf285c2f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,7 +26,6 @@ config SPARC
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 	select RTC_SYSTOHC
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select HAVE_ARCH_JUMP_LABEL if SPARC64
 	select GENERIC_IRQ_SHOW
@@ -101,10 +100,6 @@ config LOCKDEP_SUPPORT
 	bool
 	default y if SPARC64
 
-config HAVE_LATENCYTOP_SUPPORT
-	bool
-	default y if SPARC64
-
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y if SPARC64
 
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index eaee14637d93..8496a074bd0e 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -24,7 +24,13 @@ LDFLAGS        := -m elf32_sparc
 export BITS    := 32
 UTS_MACHINE    := sparc
 
+# We are adding -Wa,-Av8 to KBUILD_CFLAGS to deal with a specs bug in some
+# versions of gcc.  Some gcc versions won't pass -Av8 to binutils when you
+# give -mcpu=v8.  This silently worked with older bintutils versions but
+# does not any more.
 KBUILD_CFLAGS  += -m32 -mcpu=v8 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
+KBUILD_CFLAGS  += -Wa,-Av8
+
 KBUILD_AFLAGS  += -m32 -Wa,-Av8
 
 else
diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig
index 6b68f12f29db..04920ab8e292 100644
--- a/arch/sparc/configs/sparc64_defconfig
+++ b/arch/sparc/configs/sparc64_defconfig
@@ -102,6 +102,7 @@ CONFIG_SUNLANCE=m
 CONFIG_HAPPYMEAL=m
 CONFIG_SUNGEM=m
 CONFIG_SUNVNET=m
+CONFIG_LDMVSW=m
 CONFIG_NET_PCI=y
 CONFIG_E1000=m
 CONFIG_E1000E=m
diff --git a/arch/sparc/include/asm/barrier_32.h b/arch/sparc/include/asm/barrier_32.h
index ae69eda288f4..8059130a6cee 100644
--- a/arch/sparc/include/asm/barrier_32.h
+++ b/arch/sparc/include/asm/barrier_32.h
@@ -1,7 +1,6 @@
 #ifndef __SPARC_BARRIER_H
 #define __SPARC_BARRIER_H
 
-#include <asm/processor.h> /* for nop() */
 #include <asm-generic/barrier.h>
 
 #endif /* !(__SPARC_BARRIER_H) */
diff --git a/arch/sparc/include/asm/barrier_64.h b/arch/sparc/include/asm/barrier_64.h
index 14a928601657..c9f6ee64f41d 100644
--- a/arch/sparc/include/asm/barrier_64.h
+++ b/arch/sparc/include/asm/barrier_64.h
@@ -37,33 +37,14 @@ do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
 #define rmb()	__asm__ __volatile__("":::"memory")
 #define wmb()	__asm__ __volatile__("":::"memory")
 
-#define dma_rmb()	rmb()
-#define dma_wmb()	wmb()
-
-#define smp_store_mb(__var, __value) \
-	do { WRITE_ONCE(__var, __value); membar_safe("#StoreLoad"); } while(0)
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#else
-#define smp_mb()	__asm__ __volatile__("":::"memory")
-#define smp_rmb()	__asm__ __volatile__("":::"memory")
-#define smp_wmb()	__asm__ __volatile__("":::"memory")
-#endif
-
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
-
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)						\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
 	barrier();							\
 	WRITE_ONCE(*p, v);						\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
 	typeof(*p) ___p1 = READ_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
@@ -71,7 +52,9 @@ do {									\
 	___p1;								\
 })
 
-#define smp_mb__before_atomic()	barrier()
-#define smp_mb__after_atomic()	barrier()
+#define __smp_mb__before_atomic()	barrier()
+#define __smp_mb__after_atomic()	barrier()
+
+#include <asm-generic/barrier.h>
 
 #endif /* !(__SPARC64_BARRIER_H) */
diff --git a/arch/sparc/include/asm/checksum_32.h b/arch/sparc/include/asm/checksum_32.h
index 426b2389a1c2..eff748c871ec 100644
--- a/arch/sparc/include/asm/checksum_32.h
+++ b/arch/sparc/include/asm/checksum_32.h
@@ -170,9 +170,8 @@ static inline __sum16 csum_fold(__wsum sum)
 }
 
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					       unsigned short len,
-					       unsigned short proto,
-					       __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	__asm__ __volatile__("addcc\t%1, %0, %0\n\t"
 			     "addxcc\t%2, %0, %0\n\t"
@@ -190,9 +189,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
@@ -201,8 +199,7 @@ static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
 
 static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
+				      __u32 len, __u8 proto, __wsum sum)
 {
 	__asm__ __volatile__ (
 		"addcc	%3, %4, %%g4\n\t"
diff --git a/arch/sparc/include/asm/checksum_64.h b/arch/sparc/include/asm/checksum_64.h
index b8779a6a5911..0395d75322e9 100644
--- a/arch/sparc/include/asm/checksum_64.h
+++ b/arch/sparc/include/asm/checksum_64.h
@@ -96,8 +96,7 @@ static inline __sum16 csum_fold(__wsum sum)
 }
 
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					unsigned int len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	__asm__ __volatile__(
@@ -116,8 +115,7 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
@@ -127,8 +125,7 @@ static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
 
 static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
+				      __u32 len, __u8 proto, __wsum sum)
 {
 	__asm__ __volatile__ (
 "	addcc		%3, %4, %%g7\n"
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 830502fe62b4..6f251c4d613e 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -307,4 +307,11 @@ static inline int is_compat_task(void)
 	return test_thread_flag(TIF_32BIT);
 }
 
+static inline bool in_compat_syscall(void)
+{
+	/* Vector 0x110 is LINUX_32BIT_SYSCALL_TRAP */
+	return pt_regs_trap_type(current_pt_regs()) == 0x110;
+}
+#define in_compat_syscall in_compat_syscall
+
 #endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/arch/sparc/include/asm/compat_signal.h b/arch/sparc/include/asm/compat_signal.h
index 9ed1f128b4d1..4b027b1044fa 100644
--- a/arch/sparc/include/asm/compat_signal.h
+++ b/arch/sparc/include/asm/compat_signal.h
@@ -6,17 +6,17 @@
 
 #ifdef CONFIG_COMPAT
 struct __new_sigaction32 {
-	unsigned		sa_handler;
+	unsigned int		sa_handler;
 	unsigned int    	sa_flags;
-	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+	unsigned int		sa_restorer;     /* not used by Linux/SPARC yet */
 	compat_sigset_t 	sa_mask;
 };
 
 struct __old_sigaction32 {
-	unsigned		sa_handler;
+	unsigned int		sa_handler;
 	compat_old_sigset_t  	sa_mask;
 	unsigned int    	sa_flags;
-	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+	unsigned int		sa_restorer;     /* not used by Linux/SPARC yet */
 };
 #endif
 
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index a21da597b0b5..1180ae254154 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -37,21 +37,4 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 	return dma_ops;
 }
 
-#define HAVE_ARCH_DMA_SET_MASK 1
-
-static inline int dma_set_mask(struct device *dev, u64 mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		if (!dev->dma_mask || !dma_supported(dev, mask))
-			return -EINVAL;
-		*dev->dma_mask = mask;
-		return 0;
-	}
-#endif
-	return -EINVAL;
-}
-
-#include <asm-generic/dma-mapping-common.h>
-
 #endif
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
index 370ca1e71ffb..93310837c2df 100644
--- a/arch/sparc/include/asm/elf_64.h
+++ b/arch/sparc/include/asm/elf_64.h
@@ -95,6 +95,7 @@
  * really available.  So we simply advertise only "crypto" support.
  */
 #define HWCAP_SPARC_CRYPTO	0x04000000 /* CRYPTO insns available */
+#define HWCAP_SPARC_ADI		0x08000000 /* ADI available */
 
 #define CORE_DUMP_USE_REGSET
 
diff --git a/arch/sparc/include/asm/gpio.h b/arch/sparc/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/sparc/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h
index 910c1d9af1f8..426ad75103fb 100644
--- a/arch/sparc/include/asm/obio.h
+++ b/arch/sparc/include/asm/obio.h
@@ -117,9 +117,9 @@ static inline void bw_clear_intr_mask(int sbus_level, int mask)
 			      "i" (ASI_M_CTL));
 }
 
-static inline unsigned bw_get_prof_limit(int cpu)
+static inline unsigned int bw_get_prof_limit(int cpu)
 {
-	unsigned limit;
+	unsigned int limit;
 	
 	__asm__ __volatile__ ("lda [%1] %2, %0" :
 			      "=r" (limit) :
@@ -128,7 +128,7 @@ static inline unsigned bw_get_prof_limit(int cpu)
 	return limit;
 }
 
-static inline void bw_set_prof_limit(int cpu, unsigned limit)
+static inline void bw_set_prof_limit(int cpu, unsigned int limit)
 {
 	__asm__ __volatile__ ("sta %0, [%1] %2" : :
 			      "r" (limit),
@@ -136,9 +136,9 @@ static inline void bw_set_prof_limit(int cpu, unsigned limit)
 			      "i" (ASI_M_CTL));
 }
 
-static inline unsigned bw_get_ctrl(int cpu)
+static inline unsigned int bw_get_ctrl(int cpu)
 {
-	unsigned ctrl;
+	unsigned int ctrl;
 	
 	__asm__ __volatile__ ("lda [%1] %2, %0" :
 			      "=r" (ctrl) :
@@ -147,7 +147,7 @@ static inline unsigned bw_get_ctrl(int cpu)
 	return ctrl;
 }
 
-static inline void bw_set_ctrl(int cpu, unsigned ctrl)
+static inline void bw_set_ctrl(int cpu, unsigned int ctrl)
 {
 	__asm__ __volatile__ ("sta %0, [%1] %2" : :
 			      "r" (ctrl),
@@ -155,9 +155,9 @@ static inline void bw_set_ctrl(int cpu, unsigned ctrl)
 			      "i" (ASI_M_CTL));
 }
 
-static inline unsigned cc_get_ipen(void)
+static inline unsigned int cc_get_ipen(void)
 {
-	unsigned pending;
+	unsigned int pending;
 	
 	__asm__ __volatile__ ("lduha [%1] %2, %0" :
 			      "=r" (pending) :
@@ -166,7 +166,7 @@ static inline unsigned cc_get_ipen(void)
 	return pending;
 }
 
-static inline void cc_set_iclr(unsigned clear)
+static inline void cc_set_iclr(unsigned int clear)
 {
 	__asm__ __volatile__ ("stha %0, [%1] %2" : :
 			      "r" (clear),
@@ -174,9 +174,9 @@ static inline void cc_set_iclr(unsigned clear)
 			      "i" (ASI_M_MXCC));
 }
 
-static inline unsigned cc_get_imsk(void)
+static inline unsigned int cc_get_imsk(void)
 {
-	unsigned mask;
+	unsigned int mask;
 	
 	__asm__ __volatile__ ("lduha [%1] %2, %0" :
 			      "=r" (mask) :
@@ -185,7 +185,7 @@ static inline unsigned cc_get_imsk(void)
 	return mask;
 }
 
-static inline void cc_set_imsk(unsigned mask)
+static inline void cc_set_imsk(unsigned int mask)
 {
 	__asm__ __volatile__ ("stha %0, [%1] %2" : :
 			      "r" (mask),
@@ -193,9 +193,9 @@ static inline void cc_set_imsk(unsigned mask)
 			      "i" (ASI_M_MXCC));
 }
 
-static inline unsigned cc_get_imsk_other(int cpuid)
+static inline unsigned int cc_get_imsk_other(int cpuid)
 {
-	unsigned mask;
+	unsigned int mask;
 	
 	__asm__ __volatile__ ("lduha [%1] %2, %0" :
 			      "=r" (mask) :
@@ -204,7 +204,7 @@ static inline unsigned cc_get_imsk_other(int cpuid)
 	return mask;
 }
 
-static inline void cc_set_imsk_other(int cpuid, unsigned mask)
+static inline void cc_set_imsk_other(int cpuid, unsigned int mask)
 {
 	__asm__ __volatile__ ("stha %0, [%1] %2" : :
 			      "r" (mask),
@@ -212,7 +212,7 @@ static inline void cc_set_imsk_other(int cpuid, unsigned mask)
 			      "i" (ASI_M_CTL));
 }
 
-static inline void cc_set_igen(unsigned gen)
+static inline void cc_set_igen(unsigned int gen)
 {
 	__asm__ __volatile__ ("sta %0, [%1] %2" : :
 			      "r" (gen),
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
index 47eaafad15ce..63374c4413a8 100644
--- a/arch/sparc/include/asm/openprom.h
+++ b/arch/sparc/include/asm/openprom.h
@@ -29,12 +29,12 @@ struct linux_dev_v0_funcs {
 /* V2 and later prom device operations. */
 struct linux_dev_v2_funcs {
 	phandle (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
-	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
-	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned int sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned int sz);
 
 	/* To map devices into virtual I/O space. */
-	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
-	void (*v2_dumb_munmap)(char *virta, unsigned size);
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned int paddr, unsigned int sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned int size);
 
 	int (*v2_dev_open)(char *devpath);
 	void (*v2_dev_close)(int d);
@@ -50,7 +50,7 @@ struct linux_dev_v2_funcs {
 struct linux_mlist_v0 {
 	struct linux_mlist_v0 *theres_more;
 	unsigned int start_adr;
-	unsigned num_bytes;
+	unsigned int num_bytes;
 };
 
 struct linux_mem_v0 {
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
index d9c031f9910f..6e14fd179335 100644
--- a/arch/sparc/include/asm/pci.h
+++ b/arch/sparc/include/asm/pci.h
@@ -5,7 +5,4 @@
 #else
 #include <asm/pci_32.h>
 #endif
-
-#include <asm-generic/pci-dma-compat.h>
-
 #endif
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
index 131d36fcd07a..f089cfa249f3 100644
--- a/arch/sparc/include/asm/pgtable_64.h
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -218,7 +218,7 @@ extern pgprot_t PAGE_KERNEL_LOCKED;
 extern pgprot_t PAGE_COPY;
 extern pgprot_t PAGE_SHARED;
 
-/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */
+/* XXX This ugliness is for the atyfb driver's sparc mmap() support. XXX */
 extern unsigned long _PAGE_IE;
 extern unsigned long _PAGE_E;
 extern unsigned long _PAGE_CACHE;
@@ -681,13 +681,6 @@ static inline unsigned long pmd_trans_huge(pmd_t pmd)
 	return pte_val(pte) & _PAGE_PMD_HUGE;
 }
 
-static inline unsigned long pmd_trans_splitting(pmd_t pmd)
-{
-	pte_t pte = __pte(pmd_val(pmd));
-
-	return pmd_trans_huge(pmd) && pte_special(pte);
-}
-
 #define has_transparent_hugepage() 1
 
 static inline pmd_t pmd_mkold(pmd_t pmd)
@@ -717,29 +710,29 @@ static inline pmd_t pmd_mkdirty(pmd_t pmd)
 	return __pmd(pte_val(pte));
 }
 
-static inline pmd_t pmd_mkyoung(pmd_t pmd)
+static inline pmd_t pmd_mkclean(pmd_t pmd)
 {
 	pte_t pte = __pte(pmd_val(pmd));
 
-	pte = pte_mkyoung(pte);
+	pte = pte_mkclean(pte);
 
 	return __pmd(pte_val(pte));
 }
 
-static inline pmd_t pmd_mkwrite(pmd_t pmd)
+static inline pmd_t pmd_mkyoung(pmd_t pmd)
 {
 	pte_t pte = __pte(pmd_val(pmd));
 
-	pte = pte_mkwrite(pte);
+	pte = pte_mkyoung(pte);
 
 	return __pmd(pte_val(pte));
 }
 
-static inline pmd_t pmd_mksplitting(pmd_t pmd)
+static inline pmd_t pmd_mkwrite(pmd_t pmd)
 {
 	pte_t pte = __pte(pmd_val(pmd));
 
-	pte = pte_mkspecial(pte);
+	pte = pte_mkwrite(pte);
 
 	return __pmd(pte_val(pte));
 }
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
index 2fe99e66e760..9da9646bf6c6 100644
--- a/arch/sparc/include/asm/processor.h
+++ b/arch/sparc/include/asm/processor.h
@@ -5,7 +5,4 @@
 #else
 #include <asm/processor_32.h>
 #endif
-
-#define nop() 		__asm__ __volatile__ ("nop")
-
 #endif
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
index 6924bdefe148..ce2595c89471 100644
--- a/arch/sparc/include/asm/processor_64.h
+++ b/arch/sparc/include/asm/processor_64.h
@@ -201,7 +201,7 @@ unsigned long get_wchan(struct task_struct *task);
 #define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
 
 /* Please see the commentary in asm/backoff.h for a description of
- * what these instructions are doing and how they have been choosen.
+ * what these instructions are doing and how they have been chosen.
  * To make a long story short, we are trying to yield the current cpu
  * strand during busy loops.
  */
diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h
index fc2df1e892cb..f4eb630a58ed 100644
--- a/arch/sparc/include/asm/sigcontext.h
+++ b/arch/sparc/include/asm/sigcontext.h
@@ -25,7 +25,7 @@ struct sigcontext32 {
 	int sigc_oswins;       /* outstanding windows */
 
 	/* stack ptrs for each regwin buf */
-	unsigned sigc_spbuf[__SUNOS_MAXWIN];
+	unsigned int sigc_spbuf[__SUNOS_MAXWIN];
 
 	/* Windows to restore after signal */
 	struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN];
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
index 49f71fd5b56e..1757cd6c521b 100644
--- a/arch/sparc/include/asm/syscall.h
+++ b/arch/sparc/include/asm/syscall.h
@@ -3,6 +3,7 @@
 
 #include <uapi/linux/audit.h>
 #include <linux/kernel.h>
+#include <linux/compat.h>
 #include <linux/sched.h>
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
@@ -128,7 +129,13 @@ static inline void syscall_set_arguments(struct task_struct *task,
 
 static inline int syscall_get_arch(void)
 {
-	return is_32bit_task() ? AUDIT_ARCH_SPARC : AUDIT_ARCH_SPARC64;
+#if defined(CONFIG_SPARC64) && defined(CONFIG_COMPAT)
+	return in_compat_syscall() ? AUDIT_ARCH_SPARC : AUDIT_ARCH_SPARC64;
+#elif defined(CONFIG_SPARC64)
+	return AUDIT_ARCH_SPARC64;
+#else
+	return AUDIT_ARCH_SPARC;
+#endif
 }
 
 #endif /* __ASM_SPARC_SYSCALL_H */
diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h
index ecb49cfa3be9..c6a155c3904e 100644
--- a/arch/sparc/include/asm/tsb.h
+++ b/arch/sparc/include/asm/tsb.h
@@ -149,7 +149,7 @@ extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
 	 * page size in question.  So for PMD mappings (which fall on
 	 * bit 23, for 8MB per PMD) we must propagate bit 22 for a
 	 * 4MB huge page.  For huge PUDs (which fall on bit 33, for
-	 * 8GB per PUD), we have to accomodate 256MB and 2GB huge
+	 * 8GB per PUD), we have to accommodate 256MB and 2GB huge
 	 * pages.  So for those we propagate bits 32 to 28.
 	 */
 #define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 64ee103dc29d..57aca2792d29 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -205,31 +205,6 @@ int __put_user_bad(void);
 	__gu_ret; \
 })
 
-#define __get_user_check_ret(x, addr, size, type, retval) ({ \
-	register unsigned long __gu_val __asm__ ("l1"); \
-	if (__access_ok(addr, size)) { \
-		switch (size) { \
-		case 1: \
-			__get_user_asm_ret(__gu_val, ub, addr, retval); \
-			break; \
-		case 2: \
-			__get_user_asm_ret(__gu_val, uh, addr, retval); \
-			break; \
-		case 4: \
-			__get_user_asm_ret(__gu_val, , addr, retval); \
-			break; \
-		case 8: \
-			__get_user_asm_ret(__gu_val, d, addr, retval); \
-			break; \
-		default: \
-			if (__get_user_bad()) \
-				return retval; \
-		} \
-		x = (__force type) __gu_val; \
-	} else \
-		return retval; \
-})
-
 #define __get_user_nocheck(x, addr, size, type) ({			\
 	register int __gu_ret;						\
 	register unsigned long __gu_val;				\
@@ -247,20 +222,6 @@ int __put_user_bad(void);
 	__gu_ret;							\
 })
 
-#define __get_user_nocheck_ret(x, addr, size, type, retval) ({		\
-	register unsigned long __gu_val __asm__ ("l1");			\
-	switch (size) {							\
-	case 1: __get_user_asm_ret(__gu_val, ub, addr, retval); break;	\
-	case 2: __get_user_asm_ret(__gu_val, uh, addr, retval); break;	\
-	case 4: __get_user_asm_ret(__gu_val, , addr, retval);  break;	\
-	case 8: __get_user_asm_ret(__gu_val, d, addr, retval); break;	\
-	default:							\
-		if (__get_user_bad())					\
-			return retval;					\
-	}								\
-	x = (__force type) __gu_val;					\
-})
-
 #define __get_user_asm(x, size, addr, ret)				\
 __asm__ __volatile__(							\
 		"/* Get user asm, inline. */\n"				\
@@ -281,32 +242,6 @@ __asm__ __volatile__(							\
 	       : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),		\
 		 "i" (-EFAULT))
 
-#define __get_user_asm_ret(x, size, addr, retval)			\
-if (__builtin_constant_p(retval) && retval == -EFAULT)			\
-	__asm__ __volatile__(						\
-			"/* Get user asm ret, inline. */\n"		\
-		"1:\t"	"ld"#size " %1, %0\n\n\t"			\
-			".section __ex_table,#alloc\n\t"		\
-			".align	4\n\t"					\
-			".word	1b,__ret_efault\n\n\t"			\
-			".previous\n\t"					\
-		       : "=&r" (x) : "m" (*__m(addr)));			\
-else									\
-	__asm__ __volatile__(						\
-			"/* Get user asm ret, inline. */\n"		\
-		"1:\t"	"ld"#size " %1, %0\n\n\t"			\
-			".section .fixup,#alloc,#execinstr\n\t"		\
-			".align	4\n"					\
-		"3:\n\t"						\
-			"ret\n\t"					\
-			" restore %%g0, %2, %%o0\n\n\t"			\
-			".previous\n\t"					\
-			".section __ex_table,#alloc\n\t"		\
-			".align	4\n\t"					\
-			".word	1b, 3b\n\n\t"				\
-			".previous\n\t"					\
-		       : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
-
 int __get_user_bad(void);
 
 unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index ea6e9a20f3ff..e9a51d64974d 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -179,20 +179,6 @@ int __put_user_bad(void);
 	 __gu_ret;							     \
 })
 
-#define __get_user_nocheck_ret(data, addr, size, type, retval) ({	\
-	register unsigned long __gu_val __asm__ ("l1");			\
-	switch (size) {							\
-	case 1: __get_user_asm_ret(__gu_val, ub, addr, retval); break;	\
-	case 2: __get_user_asm_ret(__gu_val, uh, addr, retval); break;	\
-	case 4: __get_user_asm_ret(__gu_val, uw, addr, retval); break;	\
-	case 8: __get_user_asm_ret(__gu_val, x, addr, retval); break;	\
-	default:							\
-		if (__get_user_bad())					\
-			return retval;					\
-	}								\
-	data = (__force type) __gu_val;					\
-})
-
 #define __get_user_asm(x, size, addr, ret)				\
 __asm__ __volatile__(							\
 		"/* Get user asm, inline. */\n"				\
@@ -214,32 +200,6 @@ __asm__ __volatile__(							\
 	       : "=r" (ret), "=r" (x) : "r" (__m(addr)),		\
 		 "i" (-EFAULT))
 
-#define __get_user_asm_ret(x, size, addr, retval)			\
-if (__builtin_constant_p(retval) && retval == -EFAULT)			\
-	__asm__ __volatile__(						\
-		"/* Get user asm ret, inline. */\n"			\
-	"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"			\
-		".section __ex_table,\"a\"\n\t"				\
-		".align	4\n\t"						\
-		".word	1b,__ret_efault\n\n\t"				\
-		".previous\n\t"						\
-	       : "=r" (x) : "r" (__m(addr)));				\
-else									\
-	__asm__ __volatile__(						\
-		"/* Get user asm ret, inline. */\n"			\
-	"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"			\
-		".section .fixup,#alloc,#execinstr\n\t"			\
-		".align	4\n"						\
-	"3:\n\t"							\
-		"ret\n\t"						\
-		" restore %%g0, %2, %%o0\n\n\t"				\
-		".previous\n\t"						\
-		".section __ex_table,\"a\"\n\t"				\
-		".align	4\n\t"						\
-		".word	1b, 3b\n\n\t"					\
-		".previous\n\t"						\
-	       : "=r" (x) : "r" (__m(addr)), "i" (retval))
-
 int __get_user_bad(void);
 
 unsigned long __must_check ___copy_from_user(void *to,
diff --git a/arch/sparc/include/uapi/asm/socket.h b/arch/sparc/include/uapi/asm/socket.h
index e6a16c40be5f..31aede3af088 100644
--- a/arch/sparc/include/uapi/asm/socket.h
+++ b/arch/sparc/include/uapi/asm/socket.h
@@ -81,6 +81,11 @@
 #define SO_ATTACH_BPF		0x0034
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	0x0035
+#define SO_ATTACH_REUSEPORT_EBPF	0x0036
+
+#define SO_CNX_ADVICE		0x0037
+
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001
 #define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
diff --git a/arch/sparc/include/uapi/asm/stat.h b/arch/sparc/include/uapi/asm/stat.h
index a232e9e1f4e5..2f0583a2c689 100644
--- a/arch/sparc/include/uapi/asm/stat.h
+++ b/arch/sparc/include/uapi/asm/stat.h
@@ -6,13 +6,13 @@
 #if defined(__sparc__) && defined(__arch64__)
 /* 64 bit sparc */
 struct stat {
-	unsigned   st_dev;
+	unsigned int st_dev;
 	ino_t   st_ino;
 	mode_t  st_mode;
 	short   st_nlink;
 	uid_t   st_uid;
 	gid_t   st_gid;
-	unsigned   st_rdev;
+	unsigned int st_rdev;
 	off_t   st_size;
 	time_t  st_atime;
 	time_t  st_mtime;
diff --git a/arch/sparc/include/uapi/asm/unistd.h b/arch/sparc/include/uapi/asm/unistd.h
index 6f35f4df17f2..b6de8b10a55b 100644
--- a/arch/sparc/include/uapi/asm/unistd.h
+++ b/arch/sparc/include/uapi/asm/unistd.h
@@ -416,8 +416,15 @@
 #define __NR_memfd_create	348
 #define __NR_bpf		349
 #define __NR_execveat		350
+#define __NR_membarrier		351
+#define __NR_userfaultfd	352
+#define __NR_bind		353
+#define __NR_listen		354
+#define __NR_setsockopt		355
+#define __NR_mlock2		356
+#define __NR_copy_file_range	357
 
-#define NR_syscalls		351
+#define NR_syscalls		358
 
 /* Bitmask values returned from kern_features system call.  */
 #define KERN_FEATURE_MIXED_MODE_STACK	0x00000001
diff --git a/arch/sparc/kernel/audit.c b/arch/sparc/kernel/audit.c
index 24361b494a93..2585c1e14bcc 100644
--- a/arch/sparc/kernel/audit.c
+++ b/arch/sparc/kernel/audit.c
@@ -5,27 +5,27 @@
 
 #include "kernel.h"
 
-static unsigned dir_class[] = {
+static unsigned int dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
 ~0U
 };
 
-static unsigned read_class[] = {
+static unsigned int read_class[] = {
 #include <asm-generic/audit_read.h>
 ~0U
 };
 
-static unsigned write_class[] = {
+static unsigned int write_class[] = {
 #include <asm-generic/audit_write.h>
 ~0U
 };
 
-static unsigned chattr_class[] = {
+static unsigned int chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
-static unsigned signal_class[] = {
+static unsigned int signal_class[] = {
 #include <asm-generic/audit_signal.h>
 ~0U
 };
@@ -39,7 +39,7 @@ int audit_classify_arch(int arch)
 	return 0;
 }
 
-int audit_classify_syscall(int abi, unsigned syscall)
+int audit_classify_syscall(int abi, unsigned int syscall)
 {
 #ifdef CONFIG_COMPAT
 	if (abi == AUDIT_ARCH_SPARC)
diff --git a/arch/sparc/kernel/compat_audit.c b/arch/sparc/kernel/compat_audit.c
index 7062263d09c1..e5611cd428f1 100644
--- a/arch/sparc/kernel/compat_audit.c
+++ b/arch/sparc/kernel/compat_audit.c
@@ -2,32 +2,32 @@
 #include <asm/unistd.h>
 #include "kernel.h"
 
-unsigned sparc32_dir_class[] = {
+unsigned int sparc32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
 ~0U
 };
 
-unsigned sparc32_chattr_class[] = {
+unsigned int sparc32_chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
-unsigned sparc32_write_class[] = {
+unsigned int sparc32_write_class[] = {
 #include <asm-generic/audit_write.h>
 ~0U
 };
 
-unsigned sparc32_read_class[] = {
+unsigned int sparc32_read_class[] = {
 #include <asm-generic/audit_read.h>
 ~0U
 };
 
-unsigned sparc32_signal_class[] = {
+unsigned int sparc32_signal_class[] = {
 #include <asm-generic/audit_signal.h>
 ~0U
 };
 
-int sparc32_classify_syscall(unsigned syscall)
+int sparc32_classify_syscall(unsigned int syscall)
 {
 	switch(syscall) {
 	case __NR_open:
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 33c02b15f478..51aa6e86a5f8 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -948,7 +948,24 @@ linux_syscall_trace:
 	cmp	%o0, 0
 	bne	3f
 	 mov	-ENOSYS, %o0
+
+	/* Syscall tracing can modify the registers.  */
+	ld	[%sp + STACKFRAME_SZ + PT_G1], %g1
+	sethi	%hi(sys_call_table), %l7
+	ld	[%sp + STACKFRAME_SZ + PT_I0], %i0
+	or	%l7, %lo(sys_call_table), %l7
+	ld	[%sp + STACKFRAME_SZ + PT_I1], %i1
+	ld	[%sp + STACKFRAME_SZ + PT_I2], %i2
+	ld	[%sp + STACKFRAME_SZ + PT_I3], %i3
+	ld	[%sp + STACKFRAME_SZ + PT_I4], %i4
+	ld	[%sp + STACKFRAME_SZ + PT_I5], %i5
+	cmp	%g1, NR_syscalls
+	bgeu	3f
+	 mov	-ENOSYS, %o0
+
+	sll	%g1, 2, %l4
 	mov	%i0, %o0
+	ld	[%l7 + %l4], %l7
 	mov	%i1, %o1
 	mov	%i2, %o2
 	mov	%i3, %o3
@@ -1238,7 +1255,7 @@ flush_patch_exception:
 kuw_patch1_7win:	sll	%o3, 6, %o3
 
 	/* No matter how much overhead this routine has in the worst
-	 * case scenerio, it is several times better than taking the
+	 * case scenario, it is several times better than taking the
 	 * traps with the old method of just doing flush_user_windows().
 	 */
 kill_user_windows:
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index 3d61fcae7ee3..cd1f592cd347 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -696,14 +696,6 @@ tlb_fixup_done:
 	call	__bzero
 	 sub	%o1, %o0, %o1
 
-#ifdef CONFIG_LOCKDEP
-	/* We have this call this super early, as even prom_init can grab
-	 * spinlocks and thus call into the lockdep code.
-	 */
-	call	lockdep_init
-	 nop
-#endif
-
 	call	prom_init
 	 mov	%l7, %o0			! OpenPROM cif handler
 
@@ -946,6 +938,12 @@ ENTRY(__retl_one)
 	 mov	1, %o0
 ENDPROC(__retl_one)
 
+ENTRY(__retl_one_fp)
+	VISExitHalf
+	retl
+	 mov	1, %o0
+ENDPROC(__retl_one_fp)
+
 ENTRY(__ret_one_asi)
 	wr	%g0, ASI_AIUS, %asi
 	ret
@@ -958,6 +956,13 @@ ENTRY(__retl_one_asi)
 	 mov	1, %o0
 ENDPROC(__retl_one_asi)
 
+ENTRY(__retl_one_asi_fp)
+	wr	%g0, ASI_AIUS, %asi
+	VISExitHalf
+	retl
+	 mov	1, %o0
+ENDPROC(__retl_one_asi_fp)
+
 ENTRY(__retl_o1)
 	retl
 	 mov	%o1, %o0
diff --git a/arch/sparc/kernel/hvcalls.S b/arch/sparc/kernel/hvcalls.S
index afbaba52d2f1..d127130bf424 100644
--- a/arch/sparc/kernel/hvcalls.S
+++ b/arch/sparc/kernel/hvcalls.S
@@ -338,8 +338,9 @@ ENTRY(sun4v_mach_set_watchdog)
 	mov	%o1, %o4
 	mov	HV_FAST_MACH_SET_WATCHDOG, %o5
 	ta	HV_FAST_TRAP
+	brnz,a,pn %o4, 0f
 	stx	%o1, [%o4]
-	retl
+0:	retl
 	 nop
 ENDPROC(sun4v_mach_set_watchdog)
 
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 6bd75012109d..f95dd11b75ea 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -9,6 +9,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/export.h>
+#include <linux/etherdevice.h>
 
 #include <asm/oplib.h>
 #include <asm/idprom.h>
@@ -60,6 +61,12 @@ static void __init display_system_type(unsigned char machtype)
 {
 }
 #endif
+
+unsigned char *arch_get_platform_mac_address(void)
+{
+	return idprom->id_ethaddr;
+}
+
 /* Calculate the IDPROM checksum (xor of the data bytes). */
 static unsigned char __init calc_idprom_cksum(struct idprom *idprom)
 {
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 28fed53b13a0..ffd5ff4678cf 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -131,7 +131,7 @@ void __iomem *ioremap(unsigned long offset, unsigned long size)
 EXPORT_SYMBOL(ioremap);
 
 /*
- * Comlimentary to ioremap().
+ * Complementary to ioremap().
  */
 void iounmap(volatile void __iomem *virtual)
 {
@@ -233,7 +233,7 @@ _sparc_ioremap(struct resource *res, u32 bus, u32 pa, int sz)
 }
 
 /*
- * Comlimentary to _sparc_ioremap().
+ * Complementary to _sparc_ioremap().
  */
 static void _sparc_free_io(struct resource *res)
 {
@@ -532,7 +532,7 @@ static void pci32_unmap_page(struct device *dev, dma_addr_t ba, size_t size,
 }
 
 /* Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
+ * mode for DMA.  This is the scatter-gather version of the
  * above pci_map_single interface.  Here the scatter gather list
  * elements are each tagged with the appropriate dma address
  * and length.  They are obtained via sg_dma_{address,length}(SG).
diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h
index e7f652be9e61..5057ec2e4af6 100644
--- a/arch/sparc/kernel/kernel.h
+++ b/arch/sparc/kernel/kernel.h
@@ -54,12 +54,12 @@ void do_signal32(struct pt_regs * regs);
 asmlinkage int do_sys32_sigstack(u32 u_ssptr, u32 u_ossptr, unsigned long sp);
 
 /* compat_audit.c */
-extern unsigned sparc32_dir_class[];
-extern unsigned sparc32_chattr_class[];
-extern unsigned sparc32_write_class[];
-extern unsigned sparc32_read_class[];
-extern unsigned sparc32_signal_class[];
-int sparc32_classify_syscall(unsigned syscall);
+extern unsigned int sparc32_dir_class[];
+extern unsigned int sparc32_chattr_class[];
+extern unsigned int sparc32_write_class[];
+extern unsigned int sparc32_read_class[];
+extern unsigned int sparc32_signal_class[];
+int sparc32_classify_syscall(unsigned int syscall);
 #endif
 
 #ifdef CONFIG_SPARC32
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 42efcf85f721..33cd171d933e 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -203,7 +203,7 @@ static struct irq_chip leon_irq = {
 
 /*
  * Build a LEON IRQ for the edge triggered LEON IRQ controller:
- *  Edge (normal) IRQ           - handle_simple_irq, ack=DONT-CARE, never ack
+ *  Edge (normal) IRQ           - handle_simple_irq, ack=DON'T-CARE, never ack
  *  Level IRQ (PCI|Level-GPIO)  - handle_fasteoi_irq, ack=1, ack after ISR
  *  Per-CPU Edge                - handle_percpu_irq, ack=0
  */
diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c
index 6f80936e0eea..11228861d9b4 100644
--- a/arch/sparc/kernel/mdesc.c
+++ b/arch/sparc/kernel/mdesc.c
@@ -1033,25 +1033,9 @@ static ssize_t mdesc_read(struct file *file, char __user *buf,
 
 static loff_t mdesc_llseek(struct file *file, loff_t offset, int whence)
 {
-	struct mdesc_handle *hp;
-
-	switch (whence) {
-	case SEEK_CUR:
-		offset += file->f_pos;
-		break;
-	case SEEK_SET:
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	hp = file->private_data;
-	if (offset > hp->handle_size)
-		return -EINVAL;
-	else
-		file->f_pos = offset;
+	struct mdesc_handle *hp = file->private_data;
 
-	return offset;
+	return no_seek_end_llseek_size(file, offset, whence, hp->handle_size);
 }
 
 /* mdesc_close() - /dev/mdesc is being closed, release the reference to
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index b0da5aedb336..6596f66ce112 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -9,7 +9,7 @@
  *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
  */
 
 #include <linux/perf_event.h>
@@ -1828,11 +1828,18 @@ static void perf_callchain_user_32(struct perf_callchain_entry *entry,
 void
 perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 {
+	u64 saved_fault_address = current_thread_info()->fault_address;
+	u8 saved_fault_code = get_thread_fault_code();
+	mm_segment_t old_fs;
+
 	perf_callchain_store(entry, regs->tpc);
 
 	if (!current->mm)
 		return;
 
+	old_fs = get_fs();
+	set_fs(USER_DS);
+
 	flushw_user();
 
 	pagefault_disable();
@@ -1843,4 +1850,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 		perf_callchain_user_64(entry, regs);
 
 	pagefault_enable();
+
+	set_fs(old_fs);
+	set_thread_fault_code(saved_fault_code);
+	current_thread_info()->fault_address = saved_fault_address;
 }
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 46a59643bb1c..c16ef1af1843 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -103,7 +103,7 @@ static void show_regwindow32(struct pt_regs *regs)
 	mm_segment_t old_fs;
 	
 	__asm__ __volatile__ ("flushw");
-	rw = compat_ptr((unsigned)regs->u_regs[14]);
+	rw = compat_ptr((unsigned int)regs->u_regs[14]);
 	old_fs = get_fs();
 	set_fs (USER_DS);
 	if (copy_from_user (&r_w, rw, sizeof(r_w))) {
diff --git a/arch/sparc/kernel/rtrap_64.S b/arch/sparc/kernel/rtrap_64.S
index 39f0c662f4c8..d08bdaffdbfc 100644
--- a/arch/sparc/kernel/rtrap_64.S
+++ b/arch/sparc/kernel/rtrap_64.S
@@ -73,7 +73,13 @@ rtrap_nmi:	ldx			[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 		andn			%l1, %l4, %l1
 		srl			%l4, 20, %l4
 		ba,pt			%xcc, rtrap_no_irq_enable
-		 wrpr			%l4, %pil
+		nop
+		/* Do not actually set the %pil here.  We will do that
+		 * below after we clear PSTATE_IE in the %pstate register.
+		 * If we re-enable interrupts here, we can recurse down
+		 * the hardirq stack potentially endlessly, causing a
+		 * stack overflow.
+		 */
 
 		.align			64
 		.globl			rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index baef495c06bd..69d75ff1c25c 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -109,7 +109,7 @@ unsigned long cmdline_memory_size __initdata = 0;
 unsigned char boot_cpu_id = 0xff; /* 0xff will make it into DATA section... */
 
 static void
-prom_console_write(struct console *con, const char *s, unsigned n)
+prom_console_write(struct console *con, const char *s, unsigned int n)
 {
 	prom_write(s, n);
 }
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index f7b261749383..26db95b54ee9 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -77,7 +77,7 @@ struct screen_info screen_info = {
 };
 
 static void
-prom_console_write(struct console *con, const char *s, unsigned n)
+prom_console_write(struct console *con, const char *s, unsigned int n)
 {
 	prom_write(s, n);
 }
@@ -380,7 +380,8 @@ static const char *hwcaps[] = {
 	 */
 	"mul32", "div32", "fsmuld", "v8plus", "popc", "vis", "vis2",
 	"ASIBlkInit", "fmaf", "vis3", "hpc", "random", "trans", "fjfmau",
-	"ima", "cspare", "pause", "cbcond",
+	"ima", "cspare", "pause", "cbcond", NULL /*reserved for crypto */,
+	"adp",
 };
 
 static const char *crypto_hwcaps[] = {
@@ -396,7 +397,7 @@ void cpucap_info(struct seq_file *m)
 	seq_puts(m, "cpucaps\t\t: ");
 	for (i = 0; i < ARRAY_SIZE(hwcaps); i++) {
 		unsigned long bit = 1UL << i;
-		if (caps & bit) {
+		if (hwcaps[i] && (caps & bit)) {
 			seq_printf(m, "%s%s",
 				   printed ? "," : "", hwcaps[i]);
 			printed++;
@@ -450,7 +451,7 @@ static void __init report_hwcaps(unsigned long caps)
 
 	for (i = 0; i < ARRAY_SIZE(hwcaps); i++) {
 		unsigned long bit = 1UL << i;
-		if (caps & bit)
+		if (hwcaps[i] && (caps & bit))
 			report_one_hwcap(&printed, hwcaps[i]);
 	}
 	if (caps & HWCAP_SPARC_CRYPTO)
@@ -485,7 +486,7 @@ static unsigned long __init mdesc_cpu_hwcap_list(void)
 		for (i = 0; i < ARRAY_SIZE(hwcaps); i++) {
 			unsigned long bit = 1UL << i;
 
-			if (!strcmp(prop, hwcaps[i])) {
+			if (hwcaps[i] && !strcmp(prop, hwcaps[i])) {
 				caps |= bit;
 				break;
 			}
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 4eed773a7735..3c25241fa5cb 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -144,7 +144,7 @@ void do_sigreturn32(struct pt_regs *regs)
 	compat_uptr_t fpu_save;
 	compat_uptr_t rwin_save;
 	unsigned int psr;
-	unsigned pc, npc;
+	unsigned int pc, npc;
 	sigset_t set;
 	compat_sigset_t seta;
 	int err, i;
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index d88beff47bab..39aaec173f66 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -52,7 +52,7 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs)
 	unsigned char fenab;
 	int err;
 
-	flush_user_windows();
+	synchronize_user_stack();
 	if (get_thread_wsaved()					||
 	    (((unsigned long)ucp) & (sizeof(unsigned long)-1))	||
 	    (!__access_ok(ucp, sizeof(*ucp))))
diff --git a/arch/sparc/kernel/smp_32.c b/arch/sparc/kernel/smp_32.c
index b3a5d81b20f0..fb30e7c6a5b1 100644
--- a/arch/sparc/kernel/smp_32.c
+++ b/arch/sparc/kernel/smp_32.c
@@ -364,7 +364,7 @@ static void sparc_start_secondary(void *arg)
 	local_irq_enable();
 
 	wmb();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 
 	/* We should never reach here! */
 	BUG();
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 19cd08d18672..8a6151a628ce 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -134,7 +134,7 @@ void smp_callin(void)
 
 	local_irq_enable();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 void cpu_panic(void)
diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index a92d5d2c46a3..9e034f29dcc5 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -37,6 +37,7 @@ EXPORT_SYMBOL(sun4v_niagara_getperf);
 EXPORT_SYMBOL(sun4v_niagara_setperf);
 EXPORT_SYMBOL(sun4v_niagara2_getperf);
 EXPORT_SYMBOL(sun4v_niagara2_setperf);
+EXPORT_SYMBOL(sun4v_mach_set_watchdog);
 
 /* from hweight.S */
 EXPORT_SYMBOL(__arch_hweight8);
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 30e7ddb27a3a..fe8b8ee8e660 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -264,7 +264,7 @@ static unsigned long mmap_rnd(void)
 	unsigned long rnd = 0UL;
 
 	if (current->flags & PF_RANDOMIZE) {
-		unsigned long val = get_random_int();
+		unsigned long val = get_random_long();
 		if (test_thread_flag(TIF_32BIT))
 			rnd = (val % (1UL << (23UL-PAGE_SHIFT)));
 		else
@@ -337,10 +337,10 @@ SYSCALL_DEFINE6(sparc_ipc, unsigned int, call, int, first, unsigned long, second
 		switch (call) {
 		case SEMOP:
 			err = sys_semtimedop(first, ptr,
-					     (unsigned)second, NULL);
+					     (unsigned int)second, NULL);
 			goto out;
 		case SEMTIMEDOP:
-			err = sys_semtimedop(first, ptr, (unsigned)second,
+			err = sys_semtimedop(first, ptr, (unsigned int)second,
 				(const struct timespec __user *)
 					     (unsigned long) fifth);
 			goto out;
@@ -413,7 +413,7 @@ out:
 
 SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality)
 {
-	int ret;
+	long ret;
 
 	if (personality(current->personality) == PER_LINUX32 &&
 	    personality(personality) == PER_LINUX)
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index bb0008927598..c4a1b5c40e4e 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -158,7 +158,25 @@ linux_syscall_trace32:
 	 add	%sp, PTREGS_OFF, %o0
 	brnz,pn	%o0, 3f
 	 mov	-ENOSYS, %o0
+
+	/* Syscall tracing can modify the registers.  */
+	ldx	[%sp + PTREGS_OFF + PT_V9_G1], %g1
+	sethi	%hi(sys_call_table32), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I0], %i0
+	or	%l7, %lo(sys_call_table32), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I1], %i1
+	ldx	[%sp + PTREGS_OFF + PT_V9_I2], %i2
+	ldx	[%sp + PTREGS_OFF + PT_V9_I3], %i3
+	ldx	[%sp + PTREGS_OFF + PT_V9_I4], %i4
+	ldx	[%sp + PTREGS_OFF + PT_V9_I5], %i5
+
+	cmp	%g1, NR_syscalls
+	bgeu,pn	%xcc, 3f
+	 mov	-ENOSYS, %o0
+
+	sll	%g1, 2, %l4
 	srl	%i0, 0, %o0
+	lduw	[%l7 + %l4], %l7
 	srl	%i4, 0, %o4
 	srl	%i1, 0, %o1
 	srl	%i2, 0, %o2
@@ -170,7 +188,25 @@ linux_syscall_trace:
 	 add	%sp, PTREGS_OFF, %o0
 	brnz,pn	%o0, 3f
 	 mov	-ENOSYS, %o0
+
+	/* Syscall tracing can modify the registers.  */
+	ldx	[%sp + PTREGS_OFF + PT_V9_G1], %g1
+	sethi	%hi(sys_call_table64), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I0], %i0
+	or	%l7, %lo(sys_call_table64), %l7
+	ldx	[%sp + PTREGS_OFF + PT_V9_I1], %i1
+	ldx	[%sp + PTREGS_OFF + PT_V9_I2], %i2
+	ldx	[%sp + PTREGS_OFF + PT_V9_I3], %i3
+	ldx	[%sp + PTREGS_OFF + PT_V9_I4], %i4
+	ldx	[%sp + PTREGS_OFF + PT_V9_I5], %i5
+
+	cmp	%g1, NR_syscalls
+	bgeu,pn	%xcc, 3f
+	 mov	-ENOSYS, %o0
+
+	sll	%g1, 2, %l4
 	mov	%i0, %o0
+	lduw	[%l7 + %l4], %l7
 	mov	%i1, %o1
 	mov	%i2, %o2
 	mov	%i3, %o3
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index 7f41d40b7e6e..fa8e21abb5e0 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -1,4 +1,4 @@
-/* sysfs.c: Toplogy sysfs support code for sparc64.
+/* sysfs.c: Topology sysfs support code for sparc64.
  *
  * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
  */
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index e31a9056a303..6c3dd6c52f8b 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -35,18 +35,18 @@ sys_call_table:
 /*80*/	.long sys_setgroups16, sys_getpgrp, sys_setgroups, sys_setitimer, sys_ftruncate64
 /*85*/	.long sys_swapon, sys_getitimer, sys_setuid, sys_sethostname, sys_setgid
 /*90*/	.long sys_dup2, sys_setfsuid, sys_fcntl, sys_select, sys_setfsgid
-/*95*/	.long sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall
+/*95*/	.long sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept
 /*100*/	.long sys_getpriority, sys_rt_sigreturn, sys_rt_sigaction, sys_rt_sigprocmask, sys_rt_sigpending
 /*105*/	.long sys_rt_sigtimedwait, sys_rt_sigqueueinfo, sys_rt_sigsuspend, sys_setresuid, sys_getresuid
-/*110*/	.long sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
-/*115*/	.long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_nis_syscall, sys_getcwd
+/*110*/	.long sys_setresgid, sys_getresgid, sys_setregid, sys_recvmsg, sys_sendmsg
+/*115*/	.long sys_getgroups, sys_gettimeofday, sys_getrusage, sys_getsockopt, sys_getcwd
 /*120*/	.long sys_readv, sys_writev, sys_settimeofday, sys_fchown16, sys_fchmod
-/*125*/	.long sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
-/*130*/	.long sys_ftruncate, sys_flock, sys_lstat64, sys_nis_syscall, sys_nis_syscall
-/*135*/	.long sys_nis_syscall, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64
-/*140*/	.long sys_sendfile64, sys_nis_syscall, sys_futex, sys_gettid, sys_getrlimit
+/*125*/	.long sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate
+/*130*/	.long sys_ftruncate, sys_flock, sys_lstat64, sys_sendto, sys_shutdown
+/*135*/	.long sys_socketpair, sys_mkdir, sys_rmdir, sys_utimes, sys_stat64
+/*140*/	.long sys_sendfile64, sys_getpeername, sys_futex, sys_gettid, sys_getrlimit
 /*145*/	.long sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write
-/*150*/	.long sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
+/*150*/	.long sys_getsockname, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
 /*155*/	.long sys_fcntl64, sys_inotify_rm_watch, sys_statfs, sys_fstatfs, sys_oldumount
 /*160*/	.long sys_sched_setaffinity, sys_sched_getaffinity, sys_getdomainname, sys_setdomainname, sys_nis_syscall
 /*165*/	.long sys_quotactl, sys_set_tid_address, sys_mount, sys_ustat, sys_setxattr
@@ -87,4 +87,5 @@ sys_call_table:
 /*335*/	.long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
 /*340*/	.long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 /*345*/	.long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
-/*350*/	.long sys_execveat
+/*350*/	.long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
+/*355*/	.long sys_setsockopt, sys_mlock2, sys_copy_file_range
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index d72f76ae70eb..12b524cfcfa0 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -37,15 +37,15 @@ sys_call_table32:
 /*80*/	.word sys_setgroups16, sys_getpgrp, sys_setgroups, compat_sys_setitimer, sys32_ftruncate64
 	.word sys_swapon, compat_sys_getitimer, sys_setuid, sys_sethostname, sys_setgid
 /*90*/	.word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid
-	.word sys_fsync, sys_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall
+	.word sys_fsync, sys_setpriority, sys_socket, sys_connect, sys_accept
 /*100*/ .word sys_getpriority, sys32_rt_sigreturn, compat_sys_rt_sigaction, compat_sys_rt_sigprocmask, compat_sys_rt_sigpending
 	.word compat_sys_rt_sigtimedwait, compat_sys_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid
-/*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall
-	.word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, sys_nis_syscall, sys_getcwd
+/*110*/	.word sys_setresgid, sys_getresgid, sys_setregid, compat_sys_recvmsg, compat_sys_sendmsg
+	.word sys_getgroups, compat_sys_gettimeofday, compat_sys_getrusage, compat_sys_getsockopt, sys_getcwd
 /*120*/	.word compat_sys_readv, compat_sys_writev, compat_sys_settimeofday, sys_fchown16, sys_fchmod
-	.word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate
-/*130*/	.word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
-	.word sys_nis_syscall, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
+	.word sys_recvfrom, sys_setreuid16, sys_setregid16, sys_rename, compat_sys_truncate
+/*130*/	.word compat_sys_ftruncate, sys_flock, compat_sys_lstat64, sys_sendto, sys_shutdown
+	.word sys_socketpair, sys_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
 /*140*/	.word sys_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
 	.word compat_sys_setrlimit, sys_pivot_root, sys_prctl, sys_pciconfig_read, sys_pciconfig_write
 /*150*/	.word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
@@ -88,7 +88,8 @@ sys_call_table32:
 	.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
 /*340*/	.word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 	.word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
-/*350*/	.word sys32_execveat
+/*350*/	.word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
+	.word compat_sys_setsockopt, sys_mlock2, sys_copy_file_range
 
 #endif /* CONFIG_COMPAT */
 
@@ -168,4 +169,5 @@ sys_call_table:
 	.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
 /*340*/	.word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
 	.word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
-/*350*/	.word sys64_execveat
+/*350*/	.word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
+	.word sys_setsockopt, sys_mlock2, sys_copy_file_range
diff --git a/arch/sparc/kernel/unaligned_64.c b/arch/sparc/kernel/unaligned_64.c
index d89e97b374cf..9aacb9159262 100644
--- a/arch/sparc/kernel/unaligned_64.c
+++ b/arch/sparc/kernel/unaligned_64.c
@@ -209,8 +209,8 @@ static inline int do_int_store(int reg_num, int size, unsigned long *dst_addr,
 	if (size == 16) {
 		size = 8;
 		zero = (((long)(reg_num ?
-		        (unsigned)fetch_reg(reg_num, regs) : 0)) << 32) |
-			(unsigned)fetch_reg(reg_num + 1, regs);
+		        (unsigned int)fetch_reg(reg_num, regs) : 0)) << 32) |
+			(unsigned int)fetch_reg(reg_num + 1, regs);
 	} else if (reg_num) {
 		src_val_p = fetch_reg_addr(reg_num, regs);
 	}
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index f1a2f688b28a..aadd321aa05d 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -48,6 +48,7 @@ SECTIONS
 		LOCK_TEXT
 		KPROBES_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.gnu.warning)
 	} = 0
 	_etext = .;
diff --git a/arch/sparc/lib/NG2copy_from_user.S b/arch/sparc/lib/NG2copy_from_user.S
index 119ccb9a54f4..d5242b8c4f94 100644
--- a/arch/sparc/lib/NG2copy_from_user.S
+++ b/arch/sparc/lib/NG2copy_from_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif
diff --git a/arch/sparc/lib/NG2copy_to_user.S b/arch/sparc/lib/NG2copy_to_user.S
index 7fe1ccefd9d0..4e962d993b10 100644
--- a/arch/sparc/lib/NG2copy_to_user.S
+++ b/arch/sparc/lib/NG2copy_to_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif
diff --git a/arch/sparc/lib/NG2memcpy.S b/arch/sparc/lib/NG2memcpy.S
index 30eee6e8a81b..d5f585df2f3f 100644
--- a/arch/sparc/lib/NG2memcpy.S
+++ b/arch/sparc/lib/NG2memcpy.S
@@ -34,10 +34,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -134,40 +140,40 @@
 	fsrc2		%x6, %f12; \
 	fsrc2		%x7, %f14;
 #define FREG_LOAD_1(base, x0) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0))
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0))
 #define FREG_LOAD_2(base, x0, x1) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1));
 #define FREG_LOAD_3(base, x0, x1, x2) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2));
 #define FREG_LOAD_4(base, x0, x1, x2, x3) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3));
 #define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
-	EX_LD(LOAD(ldd, base + 0x20, %x4));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD_FP(LOAD(ldd, base + 0x20, %x4));
 #define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
-	EX_LD(LOAD(ldd, base + 0x20, %x4)); \
-	EX_LD(LOAD(ldd, base + 0x28, %x5));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \
+	EX_LD_FP(LOAD(ldd, base + 0x28, %x5));
 #define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \
-	EX_LD(LOAD(ldd, base + 0x00, %x0)); \
-	EX_LD(LOAD(ldd, base + 0x08, %x1)); \
-	EX_LD(LOAD(ldd, base + 0x10, %x2)); \
-	EX_LD(LOAD(ldd, base + 0x18, %x3)); \
-	EX_LD(LOAD(ldd, base + 0x20, %x4)); \
-	EX_LD(LOAD(ldd, base + 0x28, %x5)); \
-	EX_LD(LOAD(ldd, base + 0x30, %x6));
+	EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \
+	EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \
+	EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \
+	EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \
+	EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \
+	EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); \
+	EX_LD_FP(LOAD(ldd, base + 0x30, %x6));
 
 	.register	%g2,#scratch
 	.register	%g3,#scratch
@@ -275,11 +281,11 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 nop
 	/* fall through for 0 < low bits < 8 */
 110:	sub		%o4, 64, %g2
-	EX_LD(LOAD_BLK(%g2, %f0))
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+	EX_LD_FP(LOAD_BLK(%g2, %f0))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -290,10 +296,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 120:	sub		%o4, 56, %g2
 	FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -304,10 +310,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 130:	sub		%o4, 48, %g2
 	FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_6(f20, f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -318,10 +324,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 140:	sub		%o4, 40, %g2
 	FREG_LOAD_5(%g2, f0, f2, f4, f6, f8)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_5(f22, f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -332,10 +338,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 150:	sub		%o4, 32, %g2
 	FREG_LOAD_4(%g2, f0, f2, f4, f6)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_4(f24, f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -346,10 +352,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 160:	sub		%o4, 24, %g2
 	FREG_LOAD_3(%g2, f0, f2, f4)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_3(f26, f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -360,10 +366,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 170:	sub		%o4, 16, %g2
 	FREG_LOAD_2(%g2, f0, f2)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_2(f28, f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -374,10 +380,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 180:	sub		%o4, 8, %g2
 	FREG_LOAD_1(%g2, f0)
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
-	EX_LD(LOAD_BLK(%o4, %f16))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f16))
 	FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30)
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	FREG_MOVE_1(f30)
 	subcc		%g1, 64, %g1
 	add		%o4, 64, %o4
@@ -387,10 +393,10 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 nop
 
 190:
-1:	EX_ST(STORE_INIT(%g0, %o4 + %g3))
+1:	EX_ST_FP(STORE_INIT(%g0, %o4 + %g3))
 	subcc		%g1, 64, %g1
-	EX_LD(LOAD_BLK(%o4, %f0))
-	EX_ST(STORE_BLK(%f0, %o4 + %g3))
+	EX_LD_FP(LOAD_BLK(%o4, %f0))
+	EX_ST_FP(STORE_BLK(%f0, %o4 + %g3))
 	add		%o4, 64, %o4
 	bne,pt		%xcc, 1b
 	 LOAD(prefetch, %o4 + 64, #one_read)
diff --git a/arch/sparc/lib/NG4copy_from_user.S b/arch/sparc/lib/NG4copy_from_user.S
index fd9f903ffa32..2e8ee7ad07a9 100644
--- a/arch/sparc/lib/NG4copy_from_user.S
+++ b/arch/sparc/lib/NG4copy_from_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif
diff --git a/arch/sparc/lib/NG4copy_to_user.S b/arch/sparc/lib/NG4copy_to_user.S
index 9744c4540a8d..be0bf4590df8 100644
--- a/arch/sparc/lib/NG4copy_to_user.S
+++ b/arch/sparc/lib/NG4copy_to_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_asi_fp;\
+	.text;			\
+	.align 4;
+
 #ifndef ASI_AIUS
 #define ASI_AIUS	0x11
 #endif
diff --git a/arch/sparc/lib/NG4memcpy.S b/arch/sparc/lib/NG4memcpy.S
index 83aeeb1dffdb..8e13ee1f4454 100644
--- a/arch/sparc/lib/NG4memcpy.S
+++ b/arch/sparc/lib/NG4memcpy.S
@@ -48,10 +48,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -210,17 +216,17 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	sub		%o2, %o4, %o2
 	alignaddr	%o1, %g0, %g1
 	add		%o1, %o4, %o1
-	EX_LD(LOAD(ldd, %g1 + 0x00, %f0))
-1:	EX_LD(LOAD(ldd, %g1 + 0x08, %f2))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x00, %f0))
+1:	EX_LD_FP(LOAD(ldd, %g1 + 0x08, %f2))
 	subcc		%o4, 0x40, %o4
-	EX_LD(LOAD(ldd, %g1 + 0x10, %f4))
-	EX_LD(LOAD(ldd, %g1 + 0x18, %f6))
-	EX_LD(LOAD(ldd, %g1 + 0x20, %f8))
-	EX_LD(LOAD(ldd, %g1 + 0x28, %f10))
-	EX_LD(LOAD(ldd, %g1 + 0x30, %f12))
-	EX_LD(LOAD(ldd, %g1 + 0x38, %f14))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x10, %f4))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x18, %f6))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x20, %f8))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x28, %f10))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x30, %f12))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x38, %f14))
 	faligndata	%f0, %f2, %f16
-	EX_LD(LOAD(ldd, %g1 + 0x40, %f0))
+	EX_LD_FP(LOAD(ldd, %g1 + 0x40, %f0))
 	faligndata	%f2, %f4, %f18
 	add		%g1, 0x40, %g1
 	faligndata	%f4, %f6, %f20
@@ -229,14 +235,14 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	faligndata	%f10, %f12, %f26
 	faligndata	%f12, %f14, %f28
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE(std, %f16, %o0 + 0x00))
-	EX_ST(STORE(std, %f18, %o0 + 0x08))
-	EX_ST(STORE(std, %f20, %o0 + 0x10))
-	EX_ST(STORE(std, %f22, %o0 + 0x18))
-	EX_ST(STORE(std, %f24, %o0 + 0x20))
-	EX_ST(STORE(std, %f26, %o0 + 0x28))
-	EX_ST(STORE(std, %f28, %o0 + 0x30))
-	EX_ST(STORE(std, %f30, %o0 + 0x38))
+	EX_ST_FP(STORE(std, %f16, %o0 + 0x00))
+	EX_ST_FP(STORE(std, %f18, %o0 + 0x08))
+	EX_ST_FP(STORE(std, %f20, %o0 + 0x10))
+	EX_ST_FP(STORE(std, %f22, %o0 + 0x18))
+	EX_ST_FP(STORE(std, %f24, %o0 + 0x20))
+	EX_ST_FP(STORE(std, %f26, %o0 + 0x28))
+	EX_ST_FP(STORE(std, %f28, %o0 + 0x30))
+	EX_ST_FP(STORE(std, %f30, %o0 + 0x38))
 	add		%o0, 0x40, %o0
 	bne,pt		%icc, 1b
 	 LOAD(prefetch, %g1 + 0x200, #n_reads_strong)
diff --git a/arch/sparc/lib/U1copy_from_user.S b/arch/sparc/lib/U1copy_from_user.S
index a6ae2ea04bf5..ecc5692fa2b4 100644
--- a/arch/sparc/lib/U1copy_from_user.S
+++ b/arch/sparc/lib/U1copy_from_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		___copy_from_user
 #define LOAD(type,addr,dest)	type##a [addr] %asi, dest
 #define LOAD_BLK(addr,dest)	ldda [addr] ASI_BLK_AIUS, dest
diff --git a/arch/sparc/lib/U1copy_to_user.S b/arch/sparc/lib/U1copy_to_user.S
index f4b970eeb485..9eea392e44d4 100644
--- a/arch/sparc/lib/U1copy_to_user.S
+++ b/arch/sparc/lib/U1copy_to_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		___copy_to_user
 #define STORE(type,src,addr)	type##a src, [addr] ASI_AIUS
 #define STORE_BLK(src,addr)	stda src, [addr] ASI_BLK_AIUS
diff --git a/arch/sparc/lib/U1memcpy.S b/arch/sparc/lib/U1memcpy.S
index b67142b7768e..3e6209ebb7d7 100644
--- a/arch/sparc/lib/U1memcpy.S
+++ b/arch/sparc/lib/U1memcpy.S
@@ -25,10 +25,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -73,8 +79,8 @@
 	faligndata		%f8, %f9, %f62;
 
 #define MAIN_LOOP_CHUNK(src, dest, fdest, fsrc, len, jmptgt)	\
-	EX_LD(LOAD_BLK(%src, %fdest));				\
-	EX_ST(STORE_BLK(%fsrc, %dest));				\
+	EX_LD_FP(LOAD_BLK(%src, %fdest));				\
+	EX_ST_FP(STORE_BLK(%fsrc, %dest));				\
 	add			%src, 0x40, %src;		\
 	subcc			%len, 0x40, %len;		\
 	be,pn			%xcc, jmptgt;			\
@@ -89,12 +95,12 @@
 
 #define DO_SYNC			membar	#Sync;
 #define STORE_SYNC(dest, fsrc)				\
-	EX_ST(STORE_BLK(%fsrc, %dest));			\
+	EX_ST_FP(STORE_BLK(%fsrc, %dest));			\
 	add			%dest, 0x40, %dest;	\
 	DO_SYNC
 
 #define STORE_JUMP(dest, fsrc, target)			\
-	EX_ST(STORE_BLK(%fsrc, %dest));			\
+	EX_ST_FP(STORE_BLK(%fsrc, %dest));			\
 	add			%dest, 0x40, %dest;	\
 	ba,pt			%xcc, target;		\
 	 nop;
@@ -103,7 +109,7 @@
 	subcc			%left, 8, %left;\
 	bl,pn			%xcc, 95f;	\
 	 faligndata		%f0, %f1, %f48;	\
-	EX_ST(STORE(std, %f48, %dest));		\
+	EX_ST_FP(STORE(std, %f48, %dest));		\
 	add			%dest, 8, %dest;
 
 #define UNEVEN_VISCHUNK_LAST(dest, f0, f1, left)	\
@@ -160,8 +166,8 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 	 and		%g2, 0x38, %g2
 
 1:	subcc		%g1, 0x1, %g1
-	EX_LD(LOAD(ldub, %o1 + 0x00, %o3))
-	EX_ST(STORE(stb, %o3, %o1 + %GLOBAL_SPARE))
+	EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3))
+	EX_ST_FP(STORE(stb, %o3, %o1 + %GLOBAL_SPARE))
 	bgu,pt		%XCC, 1b
 	 add		%o1, 0x1, %o1
 
@@ -172,20 +178,20 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 	be,pt		%icc, 3f
 	 alignaddr	%o1, %g0, %o1
 
-	EX_LD(LOAD(ldd, %o1, %f4))
-1:	EX_LD(LOAD(ldd, %o1 + 0x8, %f6))
+	EX_LD_FP(LOAD(ldd, %o1, %f4))
+1:	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f4, %f6, %f0
-	EX_ST(STORE(std, %f0, %o0))
+	EX_ST_FP(STORE(std, %f0, %o0))
 	be,pn		%icc, 3f
 	 add		%o0, 0x8, %o0
 
-	EX_LD(LOAD(ldd, %o1 + 0x8, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f6, %f4, %f0
-	EX_ST(STORE(std, %f0, %o0))
+	EX_ST_FP(STORE(std, %f0, %o0))
 	bne,pt		%icc, 1b
 	 add		%o0, 0x8, %o0
 
@@ -208,13 +214,13 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 	add		%g1, %GLOBAL_SPARE, %g1
 	subcc		%o2, %g3, %o2
 
-	EX_LD(LOAD_BLK(%o1, %f0))
+	EX_LD_FP(LOAD_BLK(%o1, %f0))
 	add		%o1, 0x40, %o1
 	add		%g1, %g3, %g1
-	EX_LD(LOAD_BLK(%o1, %f16))
+	EX_LD_FP(LOAD_BLK(%o1, %f16))
 	add		%o1, 0x40, %o1
 	sub		%GLOBAL_SPARE, 0x80, %GLOBAL_SPARE
-	EX_LD(LOAD_BLK(%o1, %f32))
+	EX_LD_FP(LOAD_BLK(%o1, %f32))
 	add		%o1, 0x40, %o1
 
 	/* There are 8 instances of the unrolled loop,
@@ -426,28 +432,28 @@ FUNC_NAME:		/* %o0=dst, %o1=src, %o2=len */
 62:	FINISH_VISCHUNK(o0, f44, f46, g3)
 63:	UNEVEN_VISCHUNK_LAST(o0, f46, f0,  g3)
 
-93:	EX_LD(LOAD(ldd, %o1, %f2))
+93:	EX_LD_FP(LOAD(ldd, %o1, %f2))
 	add		%o1, 8, %o1
 	subcc		%g3, 8, %g3
 	faligndata	%f0, %f2, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	bl,pn		%xcc, 95f
 	 add		%o0, 8, %o0
-	EX_LD(LOAD(ldd, %o1, %f0))
+	EX_LD_FP(LOAD(ldd, %o1, %f0))
 	add		%o1, 8, %o1
 	subcc		%g3, 8, %g3
 	faligndata	%f2, %f0, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	bge,pt		%xcc, 93b
 	 add		%o0, 8, %o0
 
 95:	brz,pt		%o2, 2f
 	 mov		%g1, %o1
 
-1:	EX_LD(LOAD(ldub, %o1, %o3))
+1:	EX_LD_FP(LOAD(ldub, %o1, %o3))
 	add		%o1, 1, %o1
 	subcc		%o2, 1, %o2
-	EX_ST(STORE(stb, %o3, %o0))
+	EX_ST_FP(STORE(stb, %o3, %o0))
 	bne,pt		%xcc, 1b
 	 add		%o0, 1, %o0
 
diff --git a/arch/sparc/lib/U3copy_from_user.S b/arch/sparc/lib/U3copy_from_user.S
index b1acd1331c33..88ad73d86fe4 100644
--- a/arch/sparc/lib/U3copy_from_user.S
+++ b/arch/sparc/lib/U3copy_from_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_LD_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		U3copy_from_user
 #define LOAD(type,addr,dest)	type##a [addr] %asi, dest
 #define EX_RETVAL(x)		0
diff --git a/arch/sparc/lib/U3copy_to_user.S b/arch/sparc/lib/U3copy_to_user.S
index ef1e493afdfa..845139d75537 100644
--- a/arch/sparc/lib/U3copy_to_user.S
+++ b/arch/sparc/lib/U3copy_to_user.S
@@ -11,6 +11,14 @@
 	.text;			\
 	.align 4;
 
+#define EX_ST_FP(x)		\
+98:	x;			\
+	.section __ex_table,"a";\
+	.align 4;		\
+	.word 98b, __retl_one_fp;\
+	.text;			\
+	.align 4;
+
 #define FUNC_NAME		U3copy_to_user
 #define STORE(type,src,addr)	type##a src, [addr] ASI_AIUS
 #define STORE_BLK(src,addr)	stda src, [addr] ASI_BLK_AIUS
diff --git a/arch/sparc/lib/U3memcpy.S b/arch/sparc/lib/U3memcpy.S
index 7cae9cc6a204..491ee69e4995 100644
--- a/arch/sparc/lib/U3memcpy.S
+++ b/arch/sparc/lib/U3memcpy.S
@@ -24,10 +24,16 @@
 #ifndef EX_LD
 #define EX_LD(x)	x
 #endif
+#ifndef EX_LD_FP
+#define EX_LD_FP(x)	x
+#endif
 
 #ifndef EX_ST
 #define EX_ST(x)	x
 #endif
+#ifndef EX_ST_FP
+#define EX_ST_FP(x)	x
+#endif
 
 #ifndef EX_RETVAL
 #define EX_RETVAL(x)	x
@@ -120,8 +126,8 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	 and		%g2, 0x38, %g2
 
 1:	subcc		%g1, 0x1, %g1
-	EX_LD(LOAD(ldub, %o1 + 0x00, %o3))
-	EX_ST(STORE(stb, %o3, %o1 + GLOBAL_SPARE))
+	EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3))
+	EX_ST_FP(STORE(stb, %o3, %o1 + GLOBAL_SPARE))
 	bgu,pt		%XCC, 1b
 	 add		%o1, 0x1, %o1
 
@@ -132,20 +138,20 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	be,pt		%icc, 3f
 	 alignaddr	%o1, %g0, %o1
 
-	EX_LD(LOAD(ldd, %o1, %f4))
-1:	EX_LD(LOAD(ldd, %o1 + 0x8, %f6))
+	EX_LD_FP(LOAD(ldd, %o1, %f4))
+1:	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f4, %f6, %f0
-	EX_ST(STORE(std, %f0, %o0))
+	EX_ST_FP(STORE(std, %f0, %o0))
 	be,pn		%icc, 3f
 	 add		%o0, 0x8, %o0
 
-	EX_LD(LOAD(ldd, %o1 + 0x8, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f6, %f4, %f2
-	EX_ST(STORE(std, %f2, %o0))
+	EX_ST_FP(STORE(std, %f2, %o0))
 	bne,pt		%icc, 1b
 	 add		%o0, 0x8, %o0
 
@@ -155,25 +161,25 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 	LOAD(prefetch, %o1 + 0x080, #one_read)
 	LOAD(prefetch, %o1 + 0x0c0, #one_read)
 	LOAD(prefetch, %o1 + 0x100, #one_read)
-	EX_LD(LOAD(ldd, %o1 + 0x000, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x000, %f0))
 	LOAD(prefetch, %o1 + 0x140, #one_read)
-	EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
 	LOAD(prefetch, %o1 + 0x180, #one_read)
-	EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
 	LOAD(prefetch, %o1 + 0x1c0, #one_read)
 	faligndata	%f0, %f2, %f16
-	EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
 	faligndata	%f2, %f4, %f18
-	EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
 	faligndata	%f4, %f6, %f20
-	EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
 	faligndata	%f6, %f8, %f22
 
-	EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
 	faligndata	%f8, %f10, %f24
-	EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
 	faligndata	%f10, %f12, %f26
-	EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
 
 	subcc		GLOBAL_SPARE, 0x80, GLOBAL_SPARE
 	add		%o1, 0x40, %o1
@@ -184,26 +190,26 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 	.align		64
 1:
-	EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
 	faligndata	%f12, %f14, %f28
-	EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE_BLK(%f16, %o0))
-	EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
+	EX_ST_FP(STORE_BLK(%f16, %o0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
 	faligndata	%f0, %f2, %f16
 	add		%o0, 0x40, %o0
 
-	EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
 	faligndata	%f2, %f4, %f18
-	EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
 	faligndata	%f4, %f6, %f20
-	EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
 	subcc		%o3, 0x01, %o3
 	faligndata	%f6, %f8, %f22
-	EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
 
 	faligndata	%f8, %f10, %f24
-	EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
 	LOAD(prefetch, %o1 + 0x1c0, #one_read)
 	faligndata	%f10, %f12, %f26
 	bg,pt		%XCC, 1b
@@ -211,29 +217,29 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 	/* Finally we copy the last full 64-byte block. */
 2:
-	EX_LD(LOAD(ldd, %o1 + 0x008, %f2))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2))
 	faligndata	%f12, %f14, %f28
-	EX_LD(LOAD(ldd, %o1 + 0x010, %f4))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4))
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE_BLK(%f16, %o0))
-	EX_LD(LOAD(ldd, %o1 + 0x018, %f6))
+	EX_ST_FP(STORE_BLK(%f16, %o0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6))
 	faligndata	%f0, %f2, %f16
-	EX_LD(LOAD(ldd, %o1 + 0x020, %f8))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8))
 	faligndata	%f2, %f4, %f18
-	EX_LD(LOAD(ldd, %o1 + 0x028, %f10))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10))
 	faligndata	%f4, %f6, %f20
-	EX_LD(LOAD(ldd, %o1 + 0x030, %f12))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12))
 	faligndata	%f6, %f8, %f22
-	EX_LD(LOAD(ldd, %o1 + 0x038, %f14))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14))
 	faligndata	%f8, %f10, %f24
 	cmp		%g1, 0
 	be,pt		%XCC, 1f
 	 add		%o0, 0x40, %o0
-	EX_LD(LOAD(ldd, %o1 + 0x040, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0))
 1:	faligndata	%f10, %f12, %f26
 	faligndata	%f12, %f14, %f28
 	faligndata	%f14, %f0, %f30
-	EX_ST(STORE_BLK(%f16, %o0))
+	EX_ST_FP(STORE_BLK(%f16, %o0))
 	add		%o0, 0x40, %o0
 	add		%o1, 0x40, %o1
 	membar		#Sync
@@ -253,20 +259,20 @@ FUNC_NAME:	/* %o0=dst, %o1=src, %o2=len */
 
 	sub		%o2, %g2, %o2
 	be,a,pt		%XCC, 1f
-	 EX_LD(LOAD(ldd, %o1 + 0x00, %f0))
+	 EX_LD_FP(LOAD(ldd, %o1 + 0x00, %f0))
 
-1:	EX_LD(LOAD(ldd, %o1 + 0x08, %f2))
+1:	EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f2))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f0, %f2, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	be,pn		%XCC, 2f
 	 add		%o0, 0x8, %o0
-	EX_LD(LOAD(ldd, %o1 + 0x08, %f0))
+	EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f0))
 	add		%o1, 0x8, %o1
 	subcc		%g2, 0x8, %g2
 	faligndata	%f2, %f0, %f8
-	EX_ST(STORE(std, %f8, %o0))
+	EX_ST_FP(STORE(std, %f8, %o0))
 	bne,pn		%XCC, 1b
 	 add		%o0, 0x8, %o0
 
diff --git a/arch/sparc/mm/fault_32.c b/arch/sparc/mm/fault_32.c
index c399e7b3b035..b6c559cbd64d 100644
--- a/arch/sparc/mm/fault_32.c
+++ b/arch/sparc/mm/fault_32.c
@@ -303,10 +303,10 @@ no_context:
 		fixup = search_extables_range(regs->pc, &g2);
 		/* Values below 10 are reserved for other things */
 		if (fixup > 10) {
-			extern const unsigned __memset_start[];
-			extern const unsigned __memset_end[];
-			extern const unsigned __csum_partial_copy_start[];
-			extern const unsigned __csum_partial_copy_end[];
+			extern const unsigned int __memset_start[];
+			extern const unsigned int __memset_end[];
+			extern const unsigned int __csum_partial_copy_start[];
+			extern const unsigned int __csum_partial_copy_end[];
 
 #ifdef DEBUG_EXCEPTIONS
 			printk("Exception: PC<%08lx> faddr<%08lx>\n",
diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c
index dbabe5713a15..cb841a33da59 100644
--- a/arch/sparc/mm/fault_64.c
+++ b/arch/sparc/mm/fault_64.c
@@ -113,9 +113,6 @@ static unsigned int get_user_insn(unsigned long tpc)
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	if (pmd_trans_huge(*pmdp)) {
-		if (pmd_trans_splitting(*pmdp))
-			goto out_irq_enable;
-
 		pa  = pmd_pfn(*pmdp) << PAGE_SHIFT;
 		pa += tpc & ~HPAGE_MASK;
 
diff --git a/arch/sparc/mm/gup.c b/arch/sparc/mm/gup.c
index 2e5c4fc2daa9..4e06750a5d29 100644
--- a/arch/sparc/mm/gup.c
+++ b/arch/sparc/mm/gup.c
@@ -56,8 +56,6 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 			put_page(head);
 			return 0;
 		}
-		if (head != page)
-			get_huge_page_tail(page);
 
 		pages[*nr] = page;
 		(*nr)++;
@@ -70,7 +68,7 @@ static int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 			unsigned long end, int write, struct page **pages,
 			int *nr)
 {
-	struct page *head, *page, *tail;
+	struct page *head, *page;
 	int refs;
 
 	if (!(pmd_val(pmd) & _PAGE_VALID))
@@ -82,7 +80,6 @@ static int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 	refs = 0;
 	head = pmd_page(pmd);
 	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
-	tail = page;
 	do {
 		VM_BUG_ON(compound_head(page) != head);
 		pages[*nr] = page;
@@ -103,15 +100,6 @@ static int gup_huge_pmd(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 		return 0;
 	}
 
-	/* Any tail page need their mapcount reference taken before we
-	 * return.
-	 */
-	while (refs--) {
-		if (PageTail(tail))
-			get_huge_page_tail(tail);
-		tail++;
-	}
-
 	return 1;
 }
 
@@ -126,7 +114,7 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
 		pmd_t pmd = *pmdp;
 
 		next = pmd_addr_end(addr, end);
-		if (pmd_none(pmd) || pmd_trans_splitting(pmd))
+		if (pmd_none(pmd))
 			return 0;
 		if (unlikely(pmd_large(pmd))) {
 			if (!gup_huge_pmd(pmdp, pmd, addr, next,
@@ -249,7 +237,7 @@ slow:
 		start += nr << PAGE_SHIFT;
 		pages += nr;
 
-		ret = get_user_pages_unlocked(current, mm, start,
+		ret = get_user_pages_unlocked(start,
 			(end - start) >> PAGE_SHIFT, write, 0, pages);
 
 		/* Have to be a bit careful with return values */
diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c
index 131eaf4ad7f5..4977800e9770 100644
--- a/arch/sparc/mm/hugetlbpage.c
+++ b/arch/sparc/mm/hugetlbpage.c
@@ -146,7 +146,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 	if (pud) {
 		pmd = pmd_alloc(mm, pud, addr);
 		if (pmd)
-			pte = pte_alloc_map(mm, NULL, pmd, addr);
+			pte = pte_alloc_map(mm, pmd, addr);
 	}
 	return pte;
 }
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 3025bd57f7ab..1cfe6aab7a11 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1267,13 +1267,6 @@ static int __init numa_parse_mdesc(void)
 	int i, j, err, count;
 	u64 node;
 
-	/* Some sane defaults for numa latency values */
-	for (i = 0; i < MAX_NUMNODES; i++) {
-		for (j = 0; j < MAX_NUMNODES; j++)
-			numa_latency[i][j] = (i == j) ?
-				LOCAL_DISTANCE : REMOTE_DISTANCE;
-	}
-
 	node = mdesc_node_by_name(md, MDESC_NODE_NULL, "latency-groups");
 	if (node == MDESC_NODE_NULL) {
 		mdesc_release(md);
@@ -1369,10 +1362,18 @@ static int __init numa_parse_sun4u(void)
 
 static int __init bootmem_init_numa(void)
 {
+	int i, j;
 	int err = -1;
 
 	numadbg("bootmem_init_numa()\n");
 
+	/* Some sane defaults for numa latency values */
+	for (i = 0; i < MAX_NUMNODES; i++) {
+		for (j = 0; j < MAX_NUMNODES; j++)
+			numa_latency[i][j] = (i == j) ?
+				LOCAL_DISTANCE : REMOTE_DISTANCE;
+	}
+
 	if (numa_enabled) {
 		if (tlb_type == hypervisor)
 			err = numa_parse_mdesc();
@@ -2862,17 +2863,17 @@ void hugetlb_setup(struct pt_regs *regs)
 
 static struct resource code_resource = {
 	.name	= "Kernel code",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource data_resource = {
 	.name	= "Kernel data",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource bss_resource = {
 	.name	= "Kernel bss",
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static inline resource_size_t compute_kern_paddr(void *addr)
@@ -2908,7 +2909,7 @@ static int __init report_memory(void)
 		res->name = "System RAM";
 		res->start = pavail[i].phys_addr;
 		res->end = pavail[i].phys_addr + pavail[i].reg_size - 1;
-		res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+		res->flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM;
 
 		if (insert_resource(&iomem_resource, res) < 0) {
 			pr_warn("Resource insertion failed.\n");
diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c
index 22564f5f2364..a6d9204a6a0b 100644
--- a/arch/sparc/net/bpf_jit_comp.c
+++ b/arch/sparc/net/bpf_jit_comp.c
@@ -351,7 +351,7 @@ do {	*prog++ = BR_OPC | WDISP22(OFF);		\
  *
  * Sometimes we need to emit a branch earlier in the code
  * sequence.  And in these situations we adjust "destination"
- * to accomodate this difference.  For example, if we needed
+ * to accommodate this difference.  For example, if we needed
  * to emit a branch (and it's delay slot) right before the
  * final instruction emitted for a BPF opcode, we'd use
  * "destination + 4" instead of just plain "destination" above.
@@ -420,22 +420,9 @@ void bpf_jit_compile(struct bpf_prog *fp)
 		}
 		emit_reg_move(O7, r_saved_O7);
 
-		switch (filter[0].code) {
-		case BPF_RET | BPF_K:
-		case BPF_LD | BPF_W | BPF_LEN:
-		case BPF_LD | BPF_W | BPF_ABS:
-		case BPF_LD | BPF_H | BPF_ABS:
-		case BPF_LD | BPF_B | BPF_ABS:
-			/* The first instruction sets the A register (or is
-			 * a "RET 'constant'")
-			 */
-			break;
-		default:
-			/* Make sure we dont leak kernel information to the
-			 * user.
-			 */
+		/* Make sure we dont leak kernel information to the user. */
+		if (bpf_needs_clear_a(&filter[0]))
 			emit_clear(r_A); /* A = 0 */
-		}
 
 		for (i = 0; i < flen; i++) {
 			unsigned int K = filter[i].k;
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 106c21bd7f44..81719302b056 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -5,7 +5,6 @@ config TILE
 	def_bool y
 	select HAVE_PERF_EVENTS
 	select USE_PMC if PERF_EVENTS
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select HAVE_KVM if !TILEGX
 	select GENERIC_FIND_FIRST_BIT
@@ -19,6 +18,7 @@ config TILE
 	select VIRT_TO_BUS
 	select SYS_HYPERVISOR
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_CLOCKEVENTS
 	select MODULES_USE_ELF_RELA
@@ -116,9 +116,6 @@ config ARCH_DISCONTIGMEM_DEFAULT
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
-config STRICT_DEVMEM
-	def_bool y
-
 # SMP is required for Tilera Linux.
 config SMP
 	def_bool y
@@ -143,6 +140,7 @@ config TILEGX
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_KGDB
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select HAVE_ARCH_JUMP_LABEL
 
 config TILEPRO
 	def_bool !TILEGX
@@ -176,8 +174,6 @@ config NR_CPUS
 	  smaller kernel memory footprint results from using a smaller
 	  value on chips with fewer tiles.
 
-if TILEGX
-
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_64KB
@@ -188,8 +184,11 @@ choice
 	  connections, etc., it may be better to select 16KB, which uses
 	  memory more efficiently at some cost in TLB performance.
 
-	  Note that this option is TILE-Gx specific; currently
-	  TILEPro page size is set by rebuilding the hypervisor.
+	  Note that for TILEPro, you must also rebuild the hypervisor
+	  with a matching page size.
+
+config PAGE_SIZE_4KB
+	bool "4KB" if TILEPRO
 
 config PAGE_SIZE_16KB
 	bool "16KB"
@@ -199,8 +198,6 @@ config PAGE_SIZE_64KB
 
 endchoice
 
-endif
-
 source "kernel/Kconfig.hz"
 
 config KEXEC
@@ -458,8 +455,6 @@ config TILE_PCI_IO
 
 source "drivers/pci/Kconfig"
 
-source "drivers/pci/pcie/Kconfig"
-
 config TILE_USB
 	tristate "Tilera USB host adapter support"
 	default y
@@ -470,8 +465,6 @@ config TILE_USB
 	  Provides USB host adapter support for the built-in EHCI and OHCI
 	  interfaces on TILE-Gx chips.
 
-source "drivers/pci/hotplug/Kconfig"
-
 endmenu
 
 menu "Executable file formats"
diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig
index 37dc9364c4a1..3f3dfb8b150a 100644
--- a/arch/tile/configs/tilegx_defconfig
+++ b/arch/tile/configs/tilegx_defconfig
@@ -222,7 +222,7 @@ CONFIG_TUN=y
 CONFIG_VETH=m
 CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
 CONFIG_SKY2=y
 CONFIG_PTP_1588_CLOCK_TILEGX=y
 # CONFIG_WLAN is not set
@@ -374,7 +374,6 @@ CONFIG_DEBUG_CREDENTIALS=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_KGDB=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITYFS=y
 CONFIG_SECURITY_NETWORK=y
diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig
index 76a2781dec2c..ef9e27eb2f50 100644
--- a/arch/tile/configs/tilepro_defconfig
+++ b/arch/tile/configs/tilepro_defconfig
@@ -341,7 +341,7 @@ CONFIG_TUN=y
 CONFIG_VETH=m
 CONFIG_NET_DSA_MV88E6060=y
 CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_E1000E=y
 # CONFIG_WLAN is not set
@@ -486,7 +486,6 @@ CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_CREDENTIALS=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_ASYNC_RAID6_TEST=m
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITYFS=y
 CONFIG_SECURITY_NETWORK=y
diff --git a/arch/tile/include/asm/barrier.h b/arch/tile/include/asm/barrier.h
index 96a42ae79f4d..d55222806c2f 100644
--- a/arch/tile/include/asm/barrier.h
+++ b/arch/tile/include/asm/barrier.h
@@ -79,11 +79,12 @@ mb_incoherent(void)
  * But after the word is updated, the routine issues an "mf" before returning,
  * and since it's a function call, we don't even need a compiler barrier.
  */
-#define smp_mb__before_atomic()	smp_mb()
-#define smp_mb__after_atomic()	do { } while (0)
+#define __smp_mb__before_atomic()	__smp_mb()
+#define __smp_mb__after_atomic()	do { } while (0)
+#define smp_mb__after_atomic()	__smp_mb__after_atomic()
 #else /* 64 bit */
-#define smp_mb__before_atomic()	smp_mb()
-#define smp_mb__after_atomic()	smp_mb()
+#define __smp_mb__before_atomic()	__smp_mb()
+#define __smp_mb__after_atomic()	__smp_mb()
 #endif
 
 #include <asm-generic/barrier.h>
diff --git a/arch/tile/include/asm/cmpxchg.h b/arch/tile/include/asm/cmpxchg.h
index 0ccda3c425be..25d5899497be 100644
--- a/arch/tile/include/asm/cmpxchg.h
+++ b/arch/tile/include/asm/cmpxchg.h
@@ -127,8 +127,6 @@ long long _atomic64_cmpxchg(long long *v, long long o, long long n);
 
 #endif
 
-#define tas(ptr) xchg((ptr), 1)
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_TILE_CMPXCHG_H */
diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h
index 96ac6cce4a32..01ceb4a895b0 100644
--- a/arch/tile/include/asm/dma-mapping.h
+++ b/arch/tile/include/asm/dma-mapping.h
@@ -73,37 +73,7 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 }
 
 #define HAVE_ARCH_DMA_SET_MASK 1
-
-#include <asm-generic/dma-mapping-common.h>
-
-static inline int
-dma_set_mask(struct device *dev, u64 mask)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	/*
-	 * For PCI devices with 64-bit DMA addressing capability, promote
-	 * the dma_ops to hybrid, with the consistent memory DMA space limited
-	 * to 32-bit. For 32-bit capable devices, limit the streaming DMA
-	 * address range to max_direct_dma_addr.
-	 */
-	if (dma_ops == gx_pci_dma_map_ops ||
-	    dma_ops == gx_hybrid_pci_dma_map_ops ||
-	    dma_ops == gx_legacy_pci_dma_map_ops) {
-		if (mask == DMA_BIT_MASK(64) &&
-		    dma_ops == gx_legacy_pci_dma_map_ops)
-			set_dma_ops(dev, gx_hybrid_pci_dma_map_ops);
-		else if (mask > dev->archdata.max_direct_dma_addr)
-			mask = dev->archdata.max_direct_dma_addr;
-	}
-
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-
-	*dev->dma_mask = mask;
-
-	return 0;
-}
+int dma_set_mask(struct device *dev, u64 mask);
 
 /*
  * dma_alloc_noncoherent() is #defined to return coherent memory,
diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h
index fc8429a31c85..979579b38e57 100644
--- a/arch/tile/include/asm/highmem.h
+++ b/arch/tile/include/asm/highmem.h
@@ -63,7 +63,6 @@ void *kmap_atomic(struct page *page);
 void __kunmap_atomic(void *kvaddr);
 void *kmap_atomic_pfn(unsigned long pfn);
 void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot);
-struct page *kmap_atomic_to_page(void *ptr);
 void *kmap_atomic_prot(struct page *page, pgprot_t prot);
 void kmap_atomic_fix_kpte(struct page *page, int finished);
 
diff --git a/arch/tile/include/asm/insn.h b/arch/tile/include/asm/insn.h
new file mode 100644
index 000000000000..f78ba5c16722
--- /dev/null
+++ b/arch/tile/include/asm/insn.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2015 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+#ifndef __ASM_TILE_INSN_H
+#define __ASM_TILE_INSN_H
+
+#include <arch/opcode.h>
+
+static inline tilegx_bundle_bits NOP(void)
+{
+	return create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
+		create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
+		create_Opcode_X0(RRR_0_OPCODE_X0) |
+		create_UnaryOpcodeExtension_X1(NOP_UNARY_OPCODE_X1) |
+		create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) |
+		create_Opcode_X1(RRR_0_OPCODE_X1);
+}
+
+static inline tilegx_bundle_bits tilegx_gen_branch(unsigned long pc,
+					    unsigned long addr,
+					    bool link)
+{
+	tilegx_bundle_bits opcode_x0, opcode_x1;
+	long pcrel_by_instr = (addr - pc) >> TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES;
+
+	if (link) {
+		/* opcode: jal addr */
+		opcode_x1 =
+			create_Opcode_X1(JUMP_OPCODE_X1) |
+			create_JumpOpcodeExtension_X1(JAL_JUMP_OPCODE_X1) |
+			create_JumpOff_X1(pcrel_by_instr);
+	} else {
+		/* opcode: j addr */
+		opcode_x1 =
+			create_Opcode_X1(JUMP_OPCODE_X1) |
+			create_JumpOpcodeExtension_X1(J_JUMP_OPCODE_X1) |
+			create_JumpOff_X1(pcrel_by_instr);
+	}
+
+	/* opcode: fnop */
+	opcode_x0 =
+		create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
+		create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
+		create_Opcode_X0(RRR_0_OPCODE_X0);
+
+	return opcode_x1 | opcode_x0;
+}
+
+#endif /* __ASM_TILE_INSN_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index 322b5fe94781..30f4a210d148 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -161,14 +161,14 @@ extern void _tile_writew(u16 val, unsigned long addr);
 extern void _tile_writel(u32 val, unsigned long addr);
 extern void _tile_writeq(u64 val, unsigned long addr);
 
-#define __raw_readb(addr) _tile_readb((unsigned long)addr)
-#define __raw_readw(addr) _tile_readw((unsigned long)addr)
-#define __raw_readl(addr) _tile_readl((unsigned long)addr)
-#define __raw_readq(addr) _tile_readq((unsigned long)addr)
-#define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)addr)
-#define __raw_writew(val, addr) _tile_writew(val, (unsigned long)addr)
-#define __raw_writel(val, addr) _tile_writel(val, (unsigned long)addr)
-#define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)addr)
+#define __raw_readb(addr) _tile_readb((unsigned long)(addr))
+#define __raw_readw(addr) _tile_readw((unsigned long)(addr))
+#define __raw_readl(addr) _tile_readl((unsigned long)(addr))
+#define __raw_readq(addr) _tile_readq((unsigned long)(addr))
+#define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)(addr))
+#define __raw_writew(val, addr) _tile_writew(val, (unsigned long)(addr))
+#define __raw_writel(val, addr) _tile_writel(val, (unsigned long)(addr))
+#define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)(addr))
 
 #else /* CONFIG_PCI */
 
diff --git a/arch/tile/include/asm/jump_label.h b/arch/tile/include/asm/jump_label.h
new file mode 100644
index 000000000000..cde7573f397b
--- /dev/null
+++ b/arch/tile/include/asm/jump_label.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2015 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_JUMP_LABEL_H
+#define _ASM_TILE_JUMP_LABEL_H
+
+#include <arch/opcode.h>
+
+#define JUMP_LABEL_NOP_SIZE	TILE_BUNDLE_SIZE_IN_BYTES
+
+static __always_inline bool arch_static_branch(struct static_key *key,
+					       bool branch)
+{
+	asm_volatile_goto("1:\n\t"
+		"nop" "\n\t"
+		".pushsection __jump_table,  \"aw\"\n\t"
+		".quad 1b, %l[l_yes], %0 + %1 \n\t"
+		".popsection\n\t"
+		: :  "i" (key), "i" (branch) : : l_yes);
+	return false;
+l_yes:
+	return true;
+}
+
+static __always_inline bool arch_static_branch_jump(struct static_key *key,
+						    bool branch)
+{
+	asm_volatile_goto("1:\n\t"
+		"j %l[l_yes]" "\n\t"
+		".pushsection __jump_table,  \"aw\"\n\t"
+		".quad 1b, %l[l_yes], %0 + %1 \n\t"
+		".popsection\n\t"
+		: :  "i" (key), "i" (branch) : : l_yes);
+	return false;
+l_yes:
+	return true;
+}
+
+typedef u64 jump_label_t;
+
+struct jump_entry {
+	jump_label_t code;
+	jump_label_t target;
+	jump_label_t key;
+};
+
+#endif /* _ASM_TILE_JUMP_LABEL_H */
diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h
index a213a8d84a95..498a5f71245d 100644
--- a/arch/tile/include/asm/page.h
+++ b/arch/tile/include/asm/page.h
@@ -20,15 +20,17 @@
 #include <arch/chip.h>
 
 /* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */
-#if defined(CONFIG_PAGE_SIZE_16KB)
+#if defined(CONFIG_PAGE_SIZE_4KB)  /* tilepro only */
+#define PAGE_SHIFT	12
+#define CTX_PAGE_FLAG	HV_CTX_PG_SM_4K
+#elif defined(CONFIG_PAGE_SIZE_16KB)
 #define PAGE_SHIFT	14
 #define CTX_PAGE_FLAG	HV_CTX_PG_SM_16K
 #elif defined(CONFIG_PAGE_SIZE_64KB)
 #define PAGE_SHIFT	16
 #define CTX_PAGE_FLAG	HV_CTX_PG_SM_64K
 #else
-#define PAGE_SHIFT	HV_LOG2_DEFAULT_PAGE_SIZE_SMALL
-#define CTX_PAGE_FLAG	0
+#error Page size not specified in Kconfig
 #endif
 #define HPAGE_SHIFT	HV_LOG2_DEFAULT_PAGE_SIZE_LARGE
 
@@ -319,6 +321,16 @@ static inline int pfn_valid(unsigned long pfn)
 #define virt_to_page(kaddr) pfn_to_page(kaddr_to_pfn((void *)(kaddr)))
 #define page_to_virt(page) pfn_to_kaddr(page_to_pfn(page))
 
+/*
+ * The kernel text is mapped at MEM_SV_START as read-only.  To allow
+ * modifying kernel text, it is also mapped at PAGE_OFFSET as read-write.
+ * This macro converts a kernel address to its writable kernel text mapping,
+ * which is used to modify the text code on a running kernel by kgdb,
+ * ftrace, kprobe, jump label, etc.
+ */
+#define ktext_writable_addr(kaddr) \
+	((unsigned long)(kaddr) - MEM_SV_START + PAGE_OFFSET)
+
 struct mm_struct;
 extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
 extern pte_t *virt_to_kpte(unsigned long kaddr);
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index dfedd7ac7298..fe3de505b024 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -226,7 +226,4 @@ static inline int pcibios_assign_all_busses(void)
 /* Use any cpu for PCI. */
 #define cpumask_of_pcibus(bus) cpu_online_mask
 
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
 #endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h
index 2b05ccbebed9..96cecf55522e 100644
--- a/arch/tile/include/asm/pgtable.h
+++ b/arch/tile/include/asm/pgtable.h
@@ -489,16 +489,6 @@ static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define has_transparent_hugepage() 1
 #define pmd_trans_huge pmd_huge_page
-
-static inline pmd_t pmd_mksplitting(pmd_t pmd)
-{
-	return pte_pmd(hv_pte_set_client2(pmd_pte(pmd)));
-}
-
-static inline int pmd_trans_splitting(pmd_t pmd)
-{
-	return hv_pte_get_client2(pmd_pte(pmd));
-}
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 /*
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 139dfdee0134..0684e88aacd8 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -212,7 +212,7 @@ static inline void release_thread(struct task_struct *dead_task)
 	/* Nothing for now */
 }
 
-extern int do_work_pending(struct pt_regs *regs, u32 flags);
+extern void prepare_exit_to_usermode(struct pt_regs *regs, u32 flags);
 
 
 /*
diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h
index dc1fb28d9636..4b7cef9e94e0 100644
--- a/arch/tile/include/asm/thread_info.h
+++ b/arch/tile/include/asm/thread_info.h
@@ -140,10 +140,14 @@ extern void _cpu_idle(void);
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_NOHZ		(1<<TIF_NOHZ)
 
+/* Work to do as we loop to exit to user space. */
+#define _TIF_WORK_MASK \
+	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+	 _TIF_ASYNC_TLB | _TIF_NOTIFY_RESUME)
+
 /* Work to do on any return to user space. */
 #define _TIF_ALLWORK_MASK \
-	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_SINGLESTEP | \
-	 _TIF_ASYNC_TLB | _TIF_NOTIFY_RESUME | _TIF_NOHZ)
+	(_TIF_WORK_MASK | _TIF_SINGLESTEP | _TIF_NOHZ)
 
 /* Work to do at syscall entry. */
 #define _TIF_SYSCALL_ENTRY_WORK \
diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h
index 76b0d0ebb244..b11d5fcd2c41 100644
--- a/arch/tile/include/asm/topology.h
+++ b/arch/tile/include/asm/topology.h
@@ -44,9 +44,6 @@ static inline const struct cpumask *cpumask_of_node(int node)
 /* For now, use numa node -1 for global allocation. */
 #define pcibus_to_node(bus)		((void)(bus), -1)
 
-/* By definition, we create nodes based on online memory. */
-#define node_has_online_mem(nid) 1
-
 #endif /* CONFIG_NUMA */
 
 #include <asm-generic/topology.h>
diff --git a/arch/tile/include/hv/drv_mpipe_intf.h b/arch/tile/include/hv/drv_mpipe_intf.h
index c97e416dd963..ff7f50f970a5 100644
--- a/arch/tile/include/hv/drv_mpipe_intf.h
+++ b/arch/tile/include/hv/drv_mpipe_intf.h
@@ -211,7 +211,7 @@ _gxio_mpipe_link_mac_t;
  *  request shared data permission on the same link.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA,
- *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed.
  */
 #define GXIO_MPIPE_LINK_DATA               0x00000001UL
@@ -219,7 +219,7 @@ _gxio_mpipe_link_mac_t;
 /** Do not request data permission on the specified link.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA,
- *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed.
  */
 #define GXIO_MPIPE_LINK_NO_DATA            0x00000002UL
@@ -230,7 +230,7 @@ _gxio_mpipe_link_mac_t;
  *  data permission on it, this open will fail.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA,
- *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_DATA may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed.
  */
 #define GXIO_MPIPE_LINK_EXCL_DATA          0x00000004UL
@@ -241,7 +241,7 @@ _gxio_mpipe_link_mac_t;
  *  permission on the same link.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS,
- *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed.
  */
 #define GXIO_MPIPE_LINK_STATS              0x00000008UL
@@ -249,7 +249,7 @@ _gxio_mpipe_link_mac_t;
 /** Do not request stats permission on the specified link.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS,
- *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed.
  */
 #define GXIO_MPIPE_LINK_NO_STATS           0x00000010UL
@@ -267,7 +267,7 @@ _gxio_mpipe_link_mac_t;
  *  reset by other statistics programs.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS,
- *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_STATS may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed.
  */
 #define GXIO_MPIPE_LINK_EXCL_STATS         0x00000020UL
@@ -278,7 +278,7 @@ _gxio_mpipe_link_mac_t;
  *  permission on the same link.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL,
- *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed.
  */
 #define GXIO_MPIPE_LINK_CTL                0x00000040UL
@@ -286,7 +286,7 @@ _gxio_mpipe_link_mac_t;
 /** Do not request control permission on the specified link.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL,
- *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed.
  */
 #define GXIO_MPIPE_LINK_NO_CTL             0x00000080UL
@@ -301,7 +301,7 @@ _gxio_mpipe_link_mac_t;
  *  it prevents programs like mpipe-link from configuring the link.
  *
  *  No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL,
- *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open()
+ *  or ::GXIO_MPIPE_LINK_EXCL_CTL may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed.
  */
 #define GXIO_MPIPE_LINK_EXCL_CTL           0x00000100UL
@@ -311,7 +311,7 @@ _gxio_mpipe_link_mac_t;
  *  change the desired state of the link when it is closed or the process
  *  exits.  No more than one of ::GXIO_MPIPE_LINK_AUTO_UP,
  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or
- *  ::GXIO_MPIPE_LINK_AUTO_NONE may be specifed in a gxio_mpipe_link_open()
+ *  ::GXIO_MPIPE_LINK_AUTO_NONE may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
  */
 #define GXIO_MPIPE_LINK_AUTO_UP            0x00000200UL
@@ -322,7 +322,7 @@ _gxio_mpipe_link_mac_t;
  *  open, set the desired state of the link to down.  No more than one of
  *  ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN,
  *  ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be
- *  specifed in a gxio_mpipe_link_open() call.  If none are specified,
+ *  specified in a gxio_mpipe_link_open() call.  If none are specified,
  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
  */
 #define GXIO_MPIPE_LINK_AUTO_UPDOWN        0x00000400UL
@@ -332,7 +332,7 @@ _gxio_mpipe_link_mac_t;
  *  process has the link open, set the desired state of the link to down.
  *  No more than one of ::GXIO_MPIPE_LINK_AUTO_UP,
  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or
- *  ::GXIO_MPIPE_LINK_AUTO_NONE may be specifed in a gxio_mpipe_link_open()
+ *  ::GXIO_MPIPE_LINK_AUTO_NONE may be specified in a gxio_mpipe_link_open()
  *  call.  If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
  */
 #define GXIO_MPIPE_LINK_AUTO_DOWN          0x00000800UL
@@ -342,7 +342,7 @@ _gxio_mpipe_link_mac_t;
  *  closed or the process exits.  No more than one of
  *  ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN,
  *  ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be
- *  specifed in a gxio_mpipe_link_open() call.  If none are specified,
+ *  specified in a gxio_mpipe_link_open() call.  If none are specified,
  *  ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed.
  */
 #define GXIO_MPIPE_LINK_AUTO_NONE          0x00001000UL
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 21f77bf68c69..09936d0bcb42 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -32,5 +32,6 @@ obj-$(CONFIG_TILE_HVGLUE_TRACE)	+= hvglue_trace.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= ftrace.o mcount_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
+obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
 obj-y				+= vdso/
diff --git a/arch/tile/kernel/ftrace.c b/arch/tile/kernel/ftrace.c
index 0c0996175b1e..4a572088b270 100644
--- a/arch/tile/kernel/ftrace.c
+++ b/arch/tile/kernel/ftrace.c
@@ -20,21 +20,12 @@
 #include <asm/cacheflush.h>
 #include <asm/ftrace.h>
 #include <asm/sections.h>
+#include <asm/insn.h>
 
 #include <arch/opcode.h>
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-static inline tilegx_bundle_bits NOP(void)
-{
-	return create_UnaryOpcodeExtension_X0(FNOP_UNARY_OPCODE_X0) |
-		create_RRROpcodeExtension_X0(UNARY_RRR_0_OPCODE_X0) |
-		create_Opcode_X0(RRR_0_OPCODE_X0) |
-		create_UnaryOpcodeExtension_X1(NOP_UNARY_OPCODE_X1) |
-		create_RRROpcodeExtension_X1(UNARY_RRR_0_OPCODE_X1) |
-		create_Opcode_X1(RRR_0_OPCODE_X1);
-}
-
 static int machine_stopped __read_mostly;
 
 int ftrace_arch_code_modify_prepare(void)
@@ -117,7 +108,7 @@ static int ftrace_modify_code(unsigned long pc, unsigned long old,
 		return -EINVAL;
 
 	/* Operate on writable kernel text mapping. */
-	pc_wr = pc - MEM_SV_START + PAGE_OFFSET;
+	pc_wr = ktext_writable_addr(pc);
 
 	if (probe_kernel_write((void *)pc_wr, &new, MCOUNT_INSN_SIZE))
 		return -EPERM;
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index fbbe2ea882ea..9ff75e3a318a 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -572,7 +572,7 @@ intvec_\vecname:
 	}
 	wh64    r52
 
-#ifdef CONFIG_TRACE_IRQFLAGS
+#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING)
 	.ifnc \function,handle_nmi
 	/*
 	 * We finally have enough state set up to notify the irq
@@ -588,6 +588,9 @@ intvec_\vecname:
 	{ move r32, r2; move r33, r3 }
 	.endif
 	TRACE_IRQS_OFF
+#ifdef CONFIG_CONTEXT_TRACKING
+	jal     context_tracking_user_exit
+#endif
 	.ifnc \function,handle_syscall
 	{ move r0, r30; move r1, r31 }
 	{ move r2, r32; move r3, r33 }
@@ -846,18 +849,6 @@ STD_ENTRY(interrupt_return)
 	FEEDBACK_REENTER(interrupt_return)
 
 	/*
-	 * Use r33 to hold whether we have already loaded the callee-saves
-	 * into ptregs.  We don't want to do it twice in this loop, since
-	 * then we'd clobber whatever changes are made by ptrace, etc.
-	 * Get base of stack in r32.
-	 */
-	{
-	 GET_THREAD_INFO(r32)
-	 movei  r33, 0
-	}
-
-.Lretry_work_pending:
-	/*
 	 * Disable interrupts so as to make sure we don't
 	 * miss an interrupt that sets any of the thread flags (like
 	 * need_resched or sigpending) between sampling and the iret.
@@ -867,33 +858,27 @@ STD_ENTRY(interrupt_return)
 	IRQ_DISABLE(r20, r21)
 	TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */
 
-
-	/* Check to see if there is any work to do before returning to user. */
+	/*
+	 * See if there are any work items (including single-shot items)
+	 * to do.  If so, save the callee-save registers to pt_regs
+	 * and then dispatch to C code.
+	 */
+	GET_THREAD_INFO(r21)
 	{
-	 addi   r29, r32, THREAD_INFO_FLAGS_OFFSET
-	 moveli r1, lo16(_TIF_ALLWORK_MASK)
+	 addi   r22, r21, THREAD_INFO_FLAGS_OFFSET
+	 moveli r20, lo16(_TIF_ALLWORK_MASK)
 	}
 	{
-	 lw     r29, r29
-	 auli   r1, r1, ha16(_TIF_ALLWORK_MASK)
+	 lw     r22, r22
+	 auli   r20, r20, ha16(_TIF_ALLWORK_MASK)
 	}
-	and     r1, r29, r1
-	bzt     r1, .Lrestore_all
-
-	/*
-	 * Make sure we have all the registers saved for signal
-	 * handling, notify-resume, or single-step.  Call out to C
-	 * code to figure out exactly what we need to do for each flag bit,
-	 * then if necessary, reload the flags and recheck.
-	 */
+	and     r1, r22, r20
 	{
 	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
-	 bnz    r33, 1f
+	 bzt    r1, .Lrestore_all
 	}
 	push_extra_callee_saves r0
-	movei   r33, 1
-1:	jal     do_work_pending
-	bnz     r0, .Lretry_work_pending
+	jal     prepare_exit_to_usermode
 
 	/*
 	 * In the NMI case we
@@ -1327,7 +1312,7 @@ STD_ENTRY(ret_from_kernel_thread)
 	FEEDBACK_REENTER(ret_from_kernel_thread)
 	{
 	 movei  r30, 0               /* not an NMI */
-	 j      .Lresume_userspace   /* jump into middle of interrupt_return */
+	 j      interrupt_return
 	}
 	STD_ENDPROC(ret_from_kernel_thread)
 
diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S
index 58964d209d4d..3b51bdf37d11 100644
--- a/arch/tile/kernel/intvec_64.S
+++ b/arch/tile/kernel/intvec_64.S
@@ -658,7 +658,7 @@ intvec_\vecname:
 	 */
 	mfspr   r32, SPR_EX_CONTEXT_K_1
 	{
-	 IS_KERNEL_EX1(r22, r22)
+	 IS_KERNEL_EX1(r32, r32)
 	 PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
 	}
 	beqzt   r32, 1f       /* zero if from user space */
@@ -753,7 +753,7 @@ intvec_\vecname:
 	}
 	wh64    r52
 
-#ifdef CONFIG_TRACE_IRQFLAGS
+#if defined(CONFIG_TRACE_IRQFLAGS) || defined(CONFIG_CONTEXT_TRACKING)
 	.ifnc \function,handle_nmi
 	/*
 	 * We finally have enough state set up to notify the irq
@@ -769,6 +769,9 @@ intvec_\vecname:
 	{ move r32, r2; move r33, r3 }
 	.endif
 	TRACE_IRQS_OFF
+#ifdef CONFIG_CONTEXT_TRACKING
+	jal     context_tracking_user_exit
+#endif
 	.ifnc \function,handle_syscall
 	{ move r0, r30; move r1, r31 }
 	{ move r2, r32; move r3, r33 }
@@ -879,20 +882,6 @@ STD_ENTRY(interrupt_return)
 	FEEDBACK_REENTER(interrupt_return)
 
 	/*
-	 * Use r33 to hold whether we have already loaded the callee-saves
-	 * into ptregs.  We don't want to do it twice in this loop, since
-	 * then we'd clobber whatever changes are made by ptrace, etc.
-	 */
-	{
-	 movei  r33, 0
-	 move   r32, sp
-	}
-
-	/* Get base of stack in r32. */
-	EXTRACT_THREAD_INFO(r32)
-
-.Lretry_work_pending:
-	/*
 	 * Disable interrupts so as to make sure we don't
 	 * miss an interrupt that sets any of the thread flags (like
 	 * need_resched or sigpending) between sampling and the iret.
@@ -902,33 +891,28 @@ STD_ENTRY(interrupt_return)
 	IRQ_DISABLE(r20, r21)
 	TRACE_IRQS_OFF  /* Note: clobbers registers r0-r29 */
 
-
-	/* Check to see if there is any work to do before returning to user. */
+	/*
+	 * See if there are any work items (including single-shot items)
+	 * to do.  If so, save the callee-save registers to pt_regs
+	 * and then dispatch to C code.
+	 */
+	move    r21, sp
+	EXTRACT_THREAD_INFO(r21)
 	{
-	 addi   r29, r32, THREAD_INFO_FLAGS_OFFSET
-	 moveli r1, hw1_last(_TIF_ALLWORK_MASK)
+	 addi   r22, r21, THREAD_INFO_FLAGS_OFFSET
+	 moveli r20, hw1_last(_TIF_ALLWORK_MASK)
 	}
 	{
-	 ld     r29, r29
-	 shl16insli r1, r1, hw0(_TIF_ALLWORK_MASK)
+	 ld     r22, r22
+	 shl16insli r20, r20, hw0(_TIF_ALLWORK_MASK)
 	}
-	and     r1, r29, r1
-	beqzt   r1, .Lrestore_all
-
-	/*
-	 * Make sure we have all the registers saved for signal
-	 * handling or notify-resume.  Call out to C code to figure out
-	 * exactly what we need to do for each flag bit, then if
-	 * necessary, reload the flags and recheck.
-	 */
+	and     r1, r22, r20
 	{
 	 PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
-	 bnez   r33, 1f
+	 beqzt  r1, .Lrestore_all
 	}
 	push_extra_callee_saves r0
-	movei   r33, 1
-1:	jal     do_work_pending
-	bnez    r0, .Lretry_work_pending
+	jal     prepare_exit_to_usermode
 
 	/*
 	 * In the NMI case we
@@ -1411,7 +1395,7 @@ STD_ENTRY(ret_from_kernel_thread)
 	FEEDBACK_REENTER(ret_from_kernel_thread)
 	{
 	 movei  r30, 0               /* not an NMI */
-	 j      .Lresume_userspace   /* jump into middle of interrupt_return */
+	 j      interrupt_return
 	}
 	STD_ENDPROC(ret_from_kernel_thread)
 
diff --git a/arch/tile/kernel/jump_label.c b/arch/tile/kernel/jump_label.c
new file mode 100644
index 000000000000..07802d586988
--- /dev/null
+++ b/arch/tile/kernel/jump_label.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ *
+ * jump label TILE-Gx support
+ */
+
+#include <linux/jump_label.h>
+#include <linux/memory.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/cpu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/insn.h>
+
+#ifdef HAVE_JUMP_LABEL
+
+static void __jump_label_transform(struct jump_entry *e,
+				   enum jump_label_type type)
+{
+	tilegx_bundle_bits opcode;
+	/* Operate on writable kernel text mapping. */
+	unsigned long pc_wr = ktext_writable_addr(e->code);
+
+	if (type == JUMP_LABEL_JMP)
+		opcode = tilegx_gen_branch(e->code, e->target, false);
+	else
+		opcode = NOP();
+
+	*(tilegx_bundle_bits *)pc_wr = opcode;
+	/* Make sure that above mem writes were issued towards the memory. */
+	smp_wmb();
+}
+
+void arch_jump_label_transform(struct jump_entry *e,
+				enum jump_label_type type)
+{
+	get_online_cpus();
+	mutex_lock(&text_mutex);
+
+	__jump_label_transform(e, type);
+	flush_icache_range(e->code, e->code + sizeof(tilegx_bundle_bits));
+
+	mutex_unlock(&text_mutex);
+	put_online_cpus();
+}
+
+__init_or_module void arch_jump_label_transform_static(struct jump_entry *e,
+						enum jump_label_type type)
+{
+	__jump_label_transform(e, type);
+}
+
+#endif /* HAVE_JUMP_LABEL */
diff --git a/arch/tile/kernel/kgdb.c b/arch/tile/kernel/kgdb.c
index ff5335ae050d..9247d6b562f4 100644
--- a/arch/tile/kernel/kgdb.c
+++ b/arch/tile/kernel/kgdb.c
@@ -126,15 +126,15 @@ void
 sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
 {
 	struct pt_regs *thread_regs;
+	const int NGPRS = TREG_LAST_GPR + 1;
 
 	if (task == NULL)
 		return;
 
-	/* Initialize to zero. */
-	memset(gdb_regs, 0, NUMREGBYTES);
-
 	thread_regs = task_pt_regs(task);
-	memcpy(gdb_regs, thread_regs, TREG_LAST_GPR * sizeof(unsigned long));
+	memcpy(gdb_regs, thread_regs, NGPRS * sizeof(unsigned long));
+	memset(&gdb_regs[NGPRS], 0,
+	       (TILEGX_PC_REGNUM - NGPRS) * sizeof(unsigned long));
 	gdb_regs[TILEGX_PC_REGNUM] = thread_regs->pc;
 	gdb_regs[TILEGX_FAULTNUM_REGNUM] = thread_regs->faultnum;
 }
@@ -164,7 +164,7 @@ static unsigned long writable_address(unsigned long addr)
 	unsigned long ret = 0;
 
 	if (core_kernel_text(addr))
-		ret = addr - MEM_SV_START + PAGE_OFFSET;
+		ret = ktext_writable_addr(addr);
 	else if (is_module_text_address(addr))
 		ret = addr;
 	else
@@ -433,9 +433,9 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 struct kgdb_arch arch_kgdb_ops;
 
 /*
- * kgdb_arch_init - Perform any architecture specific initalization.
+ * kgdb_arch_init - Perform any architecture specific initialization.
  *
- * This function will handle the initalization of any architecture
+ * This function will handle the initialization of any architecture
  * specific callbacks.
  */
 int kgdb_arch_init(void)
@@ -447,9 +447,9 @@ int kgdb_arch_init(void)
 }
 
 /*
- * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ * kgdb_arch_exit - Perform any architecture specific uninitialization.
  *
- * This function will handle the uninitalization of any architecture
+ * This function will handle the uninitialization of any architecture
  * specific callbacks, for dynamic registration and unregistration.
  */
 void kgdb_arch_exit(void)
diff --git a/arch/tile/kernel/kprobes.c b/arch/tile/kernel/kprobes.c
index f8a45c51e9e4..c68694bb1ad2 100644
--- a/arch/tile/kernel/kprobes.c
+++ b/arch/tile/kernel/kprobes.c
@@ -116,7 +116,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	unsigned long addr_wr;
 
 	/* Operate on writable kernel text mapping. */
-	addr_wr = (unsigned long)p->addr - MEM_SV_START + PAGE_OFFSET;
+	addr_wr = ktext_writable_addr(p->addr);
 
 	if (probe_kernel_write((void *)addr_wr, &breakpoint_insn,
 		sizeof(breakpoint_insn)))
@@ -131,7 +131,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *kp)
 	unsigned long addr_wr;
 
 	/* Operate on writable kernel text mapping. */
-	addr_wr = (unsigned long)kp->addr - MEM_SV_START + PAGE_OFFSET;
+	addr_wr = ktext_writable_addr(kp->addr);
 
 	if (probe_kernel_write((void *)addr_wr, &kp->opcode,
 		sizeof(kp->opcode)))
diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c
index 09b58703ac26..b6bc0547a4f6 100644
--- a/arch/tile/kernel/pci-dma.c
+++ b/arch/tile/kernel/pci-dma.c
@@ -583,6 +583,35 @@ struct dma_map_ops *gx_hybrid_pci_dma_map_ops;
 EXPORT_SYMBOL(gx_legacy_pci_dma_map_ops);
 EXPORT_SYMBOL(gx_hybrid_pci_dma_map_ops);
 
+int dma_set_mask(struct device *dev, u64 mask)
+{
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	/*
+	 * For PCI devices with 64-bit DMA addressing capability, promote
+	 * the dma_ops to hybrid, with the consistent memory DMA space limited
+	 * to 32-bit. For 32-bit capable devices, limit the streaming DMA
+	 * address range to max_direct_dma_addr.
+	 */
+	if (dma_ops == gx_pci_dma_map_ops ||
+	    dma_ops == gx_hybrid_pci_dma_map_ops ||
+	    dma_ops == gx_legacy_pci_dma_map_ops) {
+		if (mask == DMA_BIT_MASK(64) &&
+		    dma_ops == gx_legacy_pci_dma_map_ops)
+			set_dma_ops(dev, gx_hybrid_pci_dma_map_ops);
+		else if (mask > dev->archdata.max_direct_dma_addr)
+			mask = dev->archdata.max_direct_dma_addr;
+	}
+
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
 #ifdef CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK
 int dma_set_coherent_mask(struct device *dev, u64 mask)
 {
diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c
index 4c017d0d2de8..aa2b44cd8fd3 100644
--- a/arch/tile/kernel/pci_gx.c
+++ b/arch/tile/kernel/pci_gx.c
@@ -1326,7 +1326,7 @@ invalid_device:
 
 
 /*
- * See tile_cfg_read() for relevent comments.
+ * See tile_cfg_read() for relevant comments.
  * Note that "val" is the value to write, not a pointer to that value.
  */
 static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
diff --git a/arch/tile/kernel/perf_event.c b/arch/tile/kernel/perf_event.c
index bb509cee3b59..8767060d70fb 100644
--- a/arch/tile/kernel/perf_event.c
+++ b/arch/tile/kernel/perf_event.c
@@ -21,7 +21,7 @@
  *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
  *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
  *  Copyright (C) 2009 Google, Inc., Stephane Eranian
  */
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 7d5769310bef..b5f30d376ce1 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -462,54 +462,57 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
 
 /*
  * This routine is called on return from interrupt if any of the
- * TIF_WORK_MASK flags are set in thread_info->flags.  It is
- * entered with interrupts disabled so we don't miss an event
- * that modified the thread_info flags.  If any flag is set, we
- * handle it and return, and the calling assembly code will
- * re-disable interrupts, reload the thread flags, and call back
- * if more flags need to be handled.
- *
- * We return whether we need to check the thread_info flags again
- * or not.  Note that we don't clear TIF_SINGLESTEP here, so it's
- * important that it be tested last, and then claim that we don't
- * need to recheck the flags.
+ * TIF_ALLWORK_MASK flags are set in thread_info->flags.  It is
+ * entered with interrupts disabled so we don't miss an event that
+ * modified the thread_info flags.  We loop until all the tested flags
+ * are clear.  Note that the function is called on certain conditions
+ * that are not listed in the loop condition here (e.g. SINGLESTEP)
+ * which guarantees we will do those things once, and redo them if any
+ * of the other work items is re-done, but won't continue looping if
+ * all the other work is done.
  */
-int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
+void prepare_exit_to_usermode(struct pt_regs *regs, u32 thread_info_flags)
 {
-	/* If we enter in kernel mode, do nothing and exit the caller loop. */
-	if (!user_mode(regs))
-		return 0;
+	if (WARN_ON(!user_mode(regs)))
+		return;
 
-	user_exit();
+	do {
+		local_irq_enable();
 
-	/* Enable interrupts; they are disabled again on return to caller. */
-	local_irq_enable();
+		if (thread_info_flags & _TIF_NEED_RESCHED)
+			schedule();
 
-	if (thread_info_flags & _TIF_NEED_RESCHED) {
-		schedule();
-		return 1;
-	}
 #if CHIP_HAS_TILE_DMA()
-	if (thread_info_flags & _TIF_ASYNC_TLB) {
-		do_async_page_fault(regs);
-		return 1;
-	}
+		if (thread_info_flags & _TIF_ASYNC_TLB)
+			do_async_page_fault(regs);
 #endif
-	if (thread_info_flags & _TIF_SIGPENDING) {
-		do_signal(regs);
-		return 1;
-	}
-	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-		return 1;
-	}
-	if (thread_info_flags & _TIF_SINGLESTEP)
+
+		if (thread_info_flags & _TIF_SIGPENDING)
+			do_signal(regs);
+
+		if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+			clear_thread_flag(TIF_NOTIFY_RESUME);
+			tracehook_notify_resume(regs);
+		}
+
+		local_irq_disable();
+		thread_info_flags = READ_ONCE(current_thread_info()->flags);
+
+	} while (thread_info_flags & _TIF_WORK_MASK);
+
+	if (thread_info_flags & _TIF_SINGLESTEP) {
 		single_step_once(regs);
+#ifndef __tilegx__
+		/*
+		 * FIXME: on tilepro, since we enable interrupts in
+		 * this routine, it's possible that we miss a signal
+		 * or other asynchronous event.
+		 */
+		local_irq_disable();
+#endif
+	}
 
 	user_enter();
-
-	return 0;
 }
 
 unsigned long get_wchan(struct task_struct *p)
diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c
index bdc126faf741..54e7b723db99 100644
--- a/arch/tile/kernel/ptrace.c
+++ b/arch/tile/kernel/ptrace.c
@@ -255,13 +255,6 @@ int do_syscall_trace_enter(struct pt_regs *regs)
 {
 	u32 work = ACCESS_ONCE(current_thread_info()->flags);
 
-	/*
-	 * If TIF_NOHZ is set, we are required to call user_exit() before
-	 * doing anything that could touch RCU.
-	 */
-	if (work & _TIF_NOHZ)
-		user_exit();
-
 	if (secure_computing() == -1)
 		return -1;
 
@@ -281,12 +274,6 @@ void do_syscall_trace_exit(struct pt_regs *regs)
 	long errno;
 
 	/*
-	 * We may come here right after calling schedule_user()
-	 * in which case we can be in RCU user mode.
-	 */
-	user_exit();
-
-	/*
 	 * The standard tile calling convention returns the value (or negative
 	 * errno) in r0, and zero (or positive errno) in r1.
 	 * It saves a couple of cycles on the hot path to do this work in
@@ -322,7 +309,5 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs)
 /* Handle synthetic interrupt delivered only by the simulator. */
 void __kprobes do_breakpoint(struct pt_regs* regs, int fault_num)
 {
-	enum ctx_state prev_state = exception_enter();
 	send_sigtrap(current, regs);
-	exception_exit(prev_state);
 }
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index 6b755d125783..a992238e9b58 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -882,7 +882,7 @@ static int __init node_neighbors(int node, int cpu,
 
 static void __init setup_numa_mapping(void)
 {
-	int distance[MAX_NUMNODES][NR_CPUS];
+	u8 distance[MAX_NUMNODES][NR_CPUS];
 	HV_Coord coord;
 	int cpu, node, cpus, i, x, y;
 	int num_nodes = num_online_nodes();
@@ -1632,14 +1632,14 @@ static struct resource data_resource = {
 	.name	= "Kernel data",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource code_resource = {
 	.name	= "Kernel code",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 /*
@@ -1673,10 +1673,15 @@ insert_ram_resource(u64 start_pfn, u64 end_pfn, bool reserved)
 		kzalloc(sizeof(struct resource), GFP_ATOMIC);
 	if (!res)
 		return NULL;
-	res->name = reserved ? "Reserved" : "System RAM";
 	res->start = start_pfn << PAGE_SHIFT;
 	res->end = (end_pfn << PAGE_SHIFT) - 1;
 	res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+	if (reserved) {
+		res->name = "Reserved";
+	} else {
+		res->name = "System RAM";
+		res->flags |= IORESOURCE_SYSRAM;
+	}
 	if (insert_resource(&iomem_resource, res)) {
 		kfree(res);
 		return NULL;
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
index 53f7b9def07b..862973074bf9 100644
--- a/arch/tile/kernel/single_step.c
+++ b/arch/tile/kernel/single_step.c
@@ -23,7 +23,6 @@
 #include <linux/types.h>
 #include <linux/err.h>
 #include <linux/prctl.h>
-#include <linux/context_tracking.h>
 #include <asm/cacheflush.h>
 #include <asm/traps.h>
 #include <asm/uaccess.h>
@@ -739,7 +738,6 @@ static DEFINE_PER_CPU(unsigned long, ss_saved_pc);
 
 void gx_singlestep_handle(struct pt_regs *regs, int fault_num)
 {
-	enum ctx_state prev_state = exception_enter();
 	unsigned long *ss_pc = this_cpu_ptr(&ss_saved_pc);
 	struct thread_info *info = (void *)current_thread_info();
 	int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP);
@@ -756,7 +754,6 @@ void gx_singlestep_handle(struct pt_regs *regs, int fault_num)
 		__insn_mtspr(SPR_SINGLE_STEP_CONTROL_K, control);
 		send_sigtrap(current, regs);
 	}
-	exception_exit(prev_state);
 }
 
 
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index 20d52a98e171..6c0abaacec33 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -208,7 +208,7 @@ void online_secondary(void)
 	/* Set up tile-timer clock-event device on this cpu */
 	setup_tile_timer();
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 int __cpu_up(unsigned int cpu, struct task_struct *tidle)
diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c
index 402b9c85a894..22bbbd3ff4a3 100644
--- a/arch/tile/kernel/stack.c
+++ b/arch/tile/kernel/stack.c
@@ -78,8 +78,7 @@ static bool read_memory_func(void *result, unsigned long address,
 /* Return a pt_regs pointer for a valid fault handler frame */
 static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt)
 {
-	const char *fault = NULL;  /* happy compiler */
-	char fault_buf[64];
+	char fault[64];
 	unsigned long sp = kbt->it.sp;
 	struct pt_regs *p;
 
@@ -90,14 +89,14 @@ static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt)
 	if (!in_kernel_stack(kbt, sp + C_ABI_SAVE_AREA_SIZE + PTREGS_SIZE-1))
 		return NULL;
 	p = (struct pt_regs *)(sp + C_ABI_SAVE_AREA_SIZE);
-	if (p->faultnum == INT_SWINT_1 || p->faultnum == INT_SWINT_1_SIGRETURN)
-		fault = "syscall";
-	else {
-		if (kbt->verbose) {     /* else we aren't going to use it */
-			snprintf(fault_buf, sizeof(fault_buf),
+	if (kbt->verbose) {     /* else we aren't going to use it */
+		if (p->faultnum == INT_SWINT_1 ||
+		    p->faultnum == INT_SWINT_1_SIGRETURN)
+			snprintf(fault, sizeof(fault),
+				 "syscall %ld", p->regs[TREG_SYSCALL_NR]);
+		else
+			snprintf(fault, sizeof(fault),
 				 "interrupt %ld", p->faultnum);
-			fault = fault_buf;
-		}
 	}
 	if (EX1_PL(p->ex1) == KERNEL_PL &&
 	    __kernel_text_address(p->pc) &&
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
index 0011a9ff0525..4d9651c5b1ad 100644
--- a/arch/tile/kernel/traps.c
+++ b/arch/tile/kernel/traps.c
@@ -20,7 +20,6 @@
 #include <linux/reboot.h>
 #include <linux/uaccess.h>
 #include <linux/ptrace.h>
-#include <linux/context_tracking.h>
 #include <asm/stack.h>
 #include <asm/traps.h>
 #include <asm/setup.h>
@@ -254,7 +253,6 @@ static int do_bpt(struct pt_regs *regs)
 void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 		       unsigned long reason)
 {
-	enum ctx_state prev_state = exception_enter();
 	siginfo_t info = { 0 };
 	int signo, code;
 	unsigned long address = 0;
@@ -263,7 +261,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 
 	/* Handle breakpoints, etc. */
 	if (is_kernel && fault_num == INT_ILL && do_bpt(regs))
-		goto done;
+		return;
 
 	/* Re-enable interrupts, if they were previously enabled. */
 	if (!(regs->flags & PT_FLAGS_DISABLE_IRQ))
@@ -277,7 +275,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 		const char *name;
 		char buf[100];
 		if (fixup_exception(regs))  /* ILL_TRANS or UNALIGN_DATA */
-			goto done;
+			return;
 		if (fault_num >= 0 &&
 		    fault_num < ARRAY_SIZE(int_name) &&
 		    int_name[fault_num] != NULL)
@@ -319,7 +317,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 	case INT_GPV:
 #if CHIP_HAS_TILE_DMA()
 		if (retry_gpv(reason))
-			goto done;
+			return;
 #endif
 		/*FALLTHROUGH*/
 	case INT_UDN_ACCESS:
@@ -346,7 +344,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 			if (!state ||
 			    (void __user *)(regs->pc) != state->buffer) {
 				single_step_once(regs);
-				goto done;
+				return;
 			}
 		}
 #endif
@@ -390,9 +388,6 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num,
 	if (signo != SIGTRAP)
 		trace_unhandled_signal("trap", regs, address, signo);
 	force_sig_info(signo, &info, current);
-
-done:
-	exception_exit(prev_state);
 }
 
 void do_nmi(struct pt_regs *regs, int fault_num, unsigned long reason)
diff --git a/arch/tile/kernel/unaligned.c b/arch/tile/kernel/unaligned.c
index d075f92ccee0..0db5f7c9d9e5 100644
--- a/arch/tile/kernel/unaligned.c
+++ b/arch/tile/kernel/unaligned.c
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/compat.h>
 #include <linux/prctl.h>
-#include <linux/context_tracking.h>
 #include <asm/cacheflush.h>
 #include <asm/traps.h>
 #include <asm/uaccess.h>
@@ -1449,7 +1448,6 @@ void jit_bundle_gen(struct pt_regs *regs, tilegx_bundle_bits bundle,
 
 void do_unaligned(struct pt_regs *regs, int vecnum)
 {
-	enum ctx_state prev_state = exception_enter();
 	tilegx_bundle_bits __user  *pc;
 	tilegx_bundle_bits bundle;
 	struct thread_info *info = current_thread_info();
@@ -1503,7 +1501,7 @@ void do_unaligned(struct pt_regs *regs, int vecnum)
 				*((tilegx_bundle_bits *)(regs->pc)));
 			jit_bundle_gen(regs, bundle, align_ctl);
 		}
-		goto done;
+		return;
 	}
 
 	/*
@@ -1527,7 +1525,7 @@ void do_unaligned(struct pt_regs *regs, int vecnum)
 
 		trace_unhandled_signal("unaligned fixup trap", regs, 0, SIGBUS);
 		force_sig_info(info.si_signo, &info, current);
-		goto done;
+		return;
 	}
 
 
@@ -1544,7 +1542,7 @@ void do_unaligned(struct pt_regs *regs, int vecnum)
 		trace_unhandled_signal("segfault in unalign fixup", regs,
 				       (unsigned long)info.si_addr, SIGSEGV);
 		force_sig_info(info.si_signo, &info, current);
-		goto done;
+		return;
 	}
 
 	if (!info->unalign_jit_base) {
@@ -1579,7 +1577,7 @@ void do_unaligned(struct pt_regs *regs, int vecnum)
 
 		if (IS_ERR((void __force *)user_page)) {
 			pr_err("Out of kernel pages trying do_mmap\n");
-			goto done;
+			return;
 		}
 
 		/* Save the address in the thread_info struct */
@@ -1592,9 +1590,6 @@ void do_unaligned(struct pt_regs *regs, int vecnum)
 
 	/* Generate unalign JIT */
 	jit_bundle_gen(regs, GX_INSN_BSWAP(bundle), align_ctl);
-
-done:
-	exception_exit(prev_state);
 }
 
 #endif /* __tilegx__ */
diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S
index 0e059a0101ea..378f5d8d1ec8 100644
--- a/arch/tile/kernel/vmlinux.lds.S
+++ b/arch/tile/kernel/vmlinux.lds.S
@@ -45,6 +45,7 @@ SECTIONS
     LOCK_TEXT
     KPROBES_TEXT
     IRQENTRY_TEXT
+    SOFTIRQENTRY_TEXT
     __fix_text_end = .;   /* tile-cpack won't rearrange before this */
     ALIGN_FUNCTION();
     *(.hottext*)
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index 13eac59bf16a..26734214818c 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -35,7 +35,6 @@
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
 #include <linux/kdebug.h>
-#include <linux/context_tracking.h>
 
 #include <asm/pgalloc.h>
 #include <asm/sections.h>
@@ -845,9 +844,7 @@ static inline void __do_page_fault(struct pt_regs *regs, int fault_num,
 void do_page_fault(struct pt_regs *regs, int fault_num,
 		   unsigned long address, unsigned long write)
 {
-	enum ctx_state prev_state = exception_enter();
 	__do_page_fault(regs, fault_num, address, write);
-	exception_exit(prev_state);
 }
 
 #if CHIP_HAS_TILE_DMA()
diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c
index fcd545014e79..eca28551b22d 100644
--- a/arch/tile/mm/highmem.c
+++ b/arch/tile/mm/highmem.c
@@ -275,15 +275,3 @@ void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot)
 {
 	return kmap_atomic_prot(pfn_to_page(pfn), prot);
 }
-
-struct page *kmap_atomic_to_page(void *ptr)
-{
-	pte_t *pte;
-	unsigned long vaddr = (unsigned long)ptr;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	pte = kmap_get_pte(vaddr);
-	return pte_page(*pte);
-}
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
index c034dc3fe2d4..e212c64682c5 100644
--- a/arch/tile/mm/hugetlbpage.c
+++ b/arch/tile/mm/hugetlbpage.c
@@ -77,7 +77,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm,
 		else {
 			if (sz != PAGE_SIZE << huge_shift[HUGE_SHIFT_PAGE])
 				panic("Unexpected page size %#lx\n", sz);
-			return pte_alloc_map(mm, NULL, pmd, addr);
+			return pte_alloc_map(mm, pmd, addr);
 		}
 	}
 #else
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
index d4e1fc41d06d..a0582b7f41d3 100644
--- a/arch/tile/mm/init.c
+++ b/arch/tile/mm/init.c
@@ -896,17 +896,15 @@ void __init pgtable_cache_init(void)
 		panic("pgtable_cache_init(): Cannot create pgd cache");
 }
 
-#ifdef CONFIG_DEBUG_PAGEALLOC
-static long __write_once initfree;
-#else
 static long __write_once initfree = 1;
-#endif
+static bool __write_once set_initfree_done;
 
 /* Select whether to free (1) or mark unusable (0) the __init pages. */
 static int __init set_initfree(char *str)
 {
 	long val;
 	if (kstrtol(str, 0, &val) == 0) {
+		set_initfree_done = true;
 		initfree = val;
 		pr_info("initfree: %s free init pages\n",
 			initfree ? "will" : "won't");
@@ -919,6 +917,11 @@ static void free_init_pages(char *what, unsigned long begin, unsigned long end)
 {
 	unsigned long addr = (unsigned long) begin;
 
+	/* Prefer user request first */
+	if (!set_initfree_done) {
+		if (debug_pagealloc_enabled())
+			initfree = 0;
+	}
 	if (kdata_huge && !initfree) {
 		pr_warn("Warning: ignoring initfree=0: incompatible with kdata=huge\n");
 		initfree = 1;
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index d195a87ca542..cc0013475444 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -2,6 +2,7 @@ config UML
 	bool
 	default y
 	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_UID16
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select GENERIC_IRQ_SHOW
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index 28a9885e3a37..4b2ed5858b2e 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -104,3 +104,19 @@ config PGTABLE_LEVELS
 	int
 	default 3 if 3_LEVEL_PGTABLES
 	default 2
+
+config SECCOMP
+	def_bool y
+	prompt "Enable seccomp to safely compute untrusted bytecode"
+	---help---
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+	  and the task is only allowed to execute a few safe syscalls
+	  defined by each seccomp mode.
+
+	  If unsure, say Y.
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index f6b911cc3923..3a4b58730f5f 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -105,13 +105,9 @@ static ssize_t hostaudio_write(struct file *file, const char __user *buffer,
 	printk(KERN_DEBUG "hostaudio: write called, count = %d\n", count);
 #endif
 
-	kbuf = kmalloc(count, GFP_KERNEL);
-	if (kbuf == NULL)
-		return -ENOMEM;
-
-	err = -EFAULT;
-	if (copy_from_user(kbuf, buffer, count))
-		goto out;
+	kbuf = memdup_user(buffer, count);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
 
 	err = os_write_file(state->fd, kbuf, count);
 	if (err < 0)
diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c
index 29880c9b324e..8a6b57108ac2 100644
--- a/arch/um/drivers/mconsole_kern.c
+++ b/arch/um/drivers/mconsole_kern.c
@@ -133,7 +133,7 @@ void mconsole_proc(struct mc_request *req)
 	ptr += strlen("proc");
 	ptr = skip_spaces(ptr);
 
-	file = file_open_root(mnt->mnt_root, mnt, ptr, O_RDONLY);
+	file = file_open_root(mnt->mnt_root, mnt, ptr, O_RDONLY, 0);
 	if (IS_ERR(file)) {
 		mconsole_reply(req, "Failed to open file", 1, 0);
 		printk(KERN_ERR "open /proc/%s: %ld\n", ptr, PTR_ERR(file));
@@ -748,19 +748,11 @@ static ssize_t mconsole_proc_write(struct file *file,
 {
 	char *buf;
 
-	buf = kmalloc(count + 1, GFP_KERNEL);
-	if (buf == NULL)
-		return -ENOMEM;
-
-	if (copy_from_user(buf, buffer, count)) {
-		count = -EFAULT;
-		goto out;
-	}
-
-	buf[count] = '\0';
+	buf = memdup_user_nul(buffer, count);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
 
 	mconsole_notify(notify_socket, MCONSOLE_USER_NOTIFY, buf, count);
- out:
 	kfree(buf);
 	return count;
 }
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index f70dd540655d..9ef669d24bb2 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -388,7 +388,7 @@ static const struct net_device_ops uml_netdev_ops = {
 static int driver_registered;
 
 static void eth_configure(int n, void *init, char *mac,
-			  struct transport *transport)
+			  struct transport *transport, gfp_t gfp_mask)
 {
 	struct uml_net *device;
 	struct net_device *dev;
@@ -397,7 +397,7 @@ static void eth_configure(int n, void *init, char *mac,
 
 	size = transport->private_size + sizeof(struct uml_net_private);
 
-	device = kzalloc(sizeof(*device), GFP_KERNEL);
+	device = kzalloc(sizeof(*device), gfp_mask);
 	if (device == NULL) {
 		printk(KERN_ERR "eth_configure failed to allocate struct "
 		       "uml_net\n");
@@ -568,7 +568,7 @@ static LIST_HEAD(transports);
 static LIST_HEAD(eth_cmd_line);
 
 static int check_transport(struct transport *transport, char *eth, int n,
-			   void **init_out, char **mac_out)
+			   void **init_out, char **mac_out, gfp_t gfp_mask)
 {
 	int len;
 
@@ -582,7 +582,7 @@ static int check_transport(struct transport *transport, char *eth, int n,
 	else if (*eth != '\0')
 		return 0;
 
-	*init_out = kmalloc(transport->setup_size, GFP_KERNEL);
+	*init_out = kmalloc(transport->setup_size, gfp_mask);
 	if (*init_out == NULL)
 		return 1;
 
@@ -609,11 +609,11 @@ void register_transport(struct transport *new)
 	list_for_each_safe(ele, next, &eth_cmd_line) {
 		eth = list_entry(ele, struct eth_init, list);
 		match = check_transport(new, eth->init, eth->index, &init,
-					&mac);
+					&mac, GFP_KERNEL);
 		if (!match)
 			continue;
 		else if (init != NULL) {
-			eth_configure(eth->index, init, mac, new);
+			eth_configure(eth->index, init, mac, new, GFP_KERNEL);
 			kfree(init);
 		}
 		list_del(&eth->list);
@@ -631,10 +631,11 @@ static int eth_setup_common(char *str, int index)
 	spin_lock(&transports_lock);
 	list_for_each(ele, &transports) {
 		transport = list_entry(ele, struct transport, list);
-	        if (!check_transport(transport, str, index, &init, &mac))
+	        if (!check_transport(transport, str, index, &init,
+					&mac, GFP_ATOMIC))
 			continue;
 		if (init != NULL) {
-			eth_configure(index, init, mac, transport);
+			eth_configure(index, init, mac, transport, GFP_ATOMIC);
 			kfree(init);
 		}
 		found = 1;
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index e697a4136707..e9f8445861dc 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -249,21 +249,23 @@ void close_addr(unsigned char *addr, unsigned char *netmask, void *arg)
 
 char *split_if_spec(char *str, ...)
 {
-	char **arg, *end;
+	char **arg, *end, *ret = NULL;
 	va_list ap;
 
 	va_start(ap, str);
 	while ((arg = va_arg(ap, char **)) != NULL) {
 		if (*str == '\0')
-			return NULL;
+			goto out;
 		end = strchr(str, ',');
 		if (end != str)
 			*arg = str;
 		if (end == NULL)
-			return NULL;
+			goto out;
 		*end++ = '\0';
 		str = end;
 	}
+	ret = str;
+out:
 	va_end(ap);
-	return str;
+	return ret;
 }
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index e8ab93c3e638..39ba20755e03 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -535,11 +535,7 @@ static int read_cow_bitmap(int fd, void *buf, int offset, int len)
 {
 	int err;
 
-	err = os_seek_file(fd, offset);
-	if (err < 0)
-		return err;
-
-	err = os_read_file(fd, buf, len);
+	err = os_pread_file(fd, buf, len, offset);
 	if (err < 0)
 		return err;
 
@@ -1377,14 +1373,8 @@ static int update_bitmap(struct io_thread_req *req)
 	if(req->cow_offset == -1)
 		return 0;
 
-	n = os_seek_file(req->fds[1], req->cow_offset);
-	if(n < 0){
-		printk("do_io - bitmap lseek failed : err = %d\n", -n);
-		return 1;
-	}
-
-	n = os_write_file(req->fds[1], &req->bitmap_words,
-			  sizeof(req->bitmap_words));
+	n = os_pwrite_file(req->fds[1], &req->bitmap_words,
+			  sizeof(req->bitmap_words), req->cow_offset);
 	if(n != sizeof(req->bitmap_words)){
 		printk("do_io - bitmap update failed, err = %d fd = %d\n", -n,
 		       req->fds[1]);
@@ -1399,7 +1389,6 @@ static void do_io(struct io_thread_req *req)
 	char *buf;
 	unsigned long len;
 	int n, nsectors, start, end, bit;
-	int err;
 	__u64 off;
 
 	if (req->op == UBD_FLUSH) {
@@ -1428,18 +1417,12 @@ static void do_io(struct io_thread_req *req)
 		len = (end - start) * req->sectorsize;
 		buf = &req->buffer[start * req->sectorsize];
 
-		err = os_seek_file(req->fds[bit], off);
-		if(err < 0){
-			printk("do_io - lseek failed : err = %d\n", -err);
-			req->error = 1;
-			return;
-		}
 		if(req->op == UBD_READ){
 			n = 0;
 			do {
 				buf = &buf[n];
 				len -= n;
-				n = os_read_file(req->fds[bit], buf, len);
+				n = os_pread_file(req->fds[bit], buf, len, off);
 				if (n < 0) {
 					printk("do_io - read failed, err = %d "
 					       "fd = %d\n", -n, req->fds[bit]);
@@ -1449,7 +1432,7 @@ static void do_io(struct io_thread_req *req)
 			} while((n < len) && (n != 0));
 			if (n < len) memset(&buf[n], 0, len - n);
 		} else {
-			n = os_write_file(req->fds[bit], buf, len);
+			n = os_pwrite_file(req->fds[bit], buf, len, off);
 			if(n != len){
 				printk("do_io - write failed err = %d "
 				       "fd = %d\n", -n, req->fds[bit]);
diff --git a/arch/um/include/asm/hardirq.h b/arch/um/include/asm/hardirq.h
new file mode 100644
index 000000000000..756f0778e327
--- /dev/null
+++ b/arch/um/include/asm/hardirq.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_UM_HARDIRQ_H
+#define __ASM_UM_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+#include <linux/irq.h>
+
+#ifndef ack_bad_irq
+static inline void ack_bad_irq(unsigned int irq)
+{
+	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+}
+#endif
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED 1
+
+#endif /* __ASM_UM_HARDIRQ_H */
diff --git a/arch/um/include/asm/mmu_context.h b/arch/um/include/asm/mmu_context.h
index 941527e507f7..1a60e1328e2f 100644
--- a/arch/um/include/asm/mmu_context.h
+++ b/arch/um/include/asm/mmu_context.h
@@ -27,6 +27,20 @@ static inline void arch_bprm_mm_init(struct mm_struct *mm,
 				     struct vm_area_struct *vma)
 {
 }
+
+static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
+		bool write, bool execute, bool foreign)
+{
+	/* by default, allow everything */
+	return true;
+}
+
+static inline bool arch_pte_access_permitted(pte_t pte, bool write)
+{
+	/* by default, allow everything */
+	return true;
+}
+
 /*
  * end asm-generic/mm_hooks.h functions
  */
diff --git a/arch/um/include/asm/page.h b/arch/um/include/asm/page.h
index 71c5d132062a..f878bec23576 100644
--- a/arch/um/include/asm/page.h
+++ b/arch/um/include/asm/page.h
@@ -18,6 +18,7 @@
 
 struct page;
 
+#include <linux/pfn.h>
 #include <linux/types.h>
 #include <asm/vm-flags.h>
 
@@ -33,26 +34,22 @@ struct page;
 
 #if defined(CONFIG_3_LEVEL_PGTABLES) && !defined(CONFIG_64BIT)
 
-typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long pte; } pte_t;
 typedef struct { unsigned long pmd; } pmd_t;
 typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x) ((x).pte_low | ((unsigned long long) (x).pte_high << 32))
-
-#define pte_get_bits(pte, bits) ((pte).pte_low & (bits))
-#define pte_set_bits(pte, bits) ((pte).pte_low |= (bits))
-#define pte_clear_bits(pte, bits) ((pte).pte_low &= ~(bits))
-#define pte_copy(to, from) ({ (to).pte_high = (from).pte_high; \
-			      smp_wmb(); \
-			      (to).pte_low = (from).pte_low; })
-#define pte_is_zero(pte) (!((pte).pte_low & ~_PAGE_NEWPAGE) && !(pte).pte_high)
-#define pte_set_val(pte, phys, prot) \
-	({ (pte).pte_high = (phys) >> 32; \
-	   (pte).pte_low = (phys) | pgprot_val(prot); })
+#define pte_val(p) ((p).pte)
+
+#define pte_get_bits(p, bits) ((p).pte & (bits))
+#define pte_set_bits(p, bits) ((p).pte |= (bits))
+#define pte_clear_bits(p, bits) ((p).pte &= ~(bits))
+#define pte_copy(to, from) ({ (to).pte = (from).pte; })
+#define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE))
+#define pte_set_val(p, phys, prot) \
+	({ (p).pte = (phys) | pgprot_val(prot); })
 
 #define pmd_val(x)	((x).pmd)
 #define __pmd(x) ((pmd_t) { (x) } )
 
-typedef unsigned long long pfn_t;
 typedef unsigned long long phys_t;
 
 #else
@@ -76,7 +73,6 @@ typedef struct { unsigned long pmd; } pmd_t;
 #define pte_is_zero(p) (!((p).pte & ~_PAGE_NEWPAGE))
 #define pte_set_val(p, phys, prot) (p).pte = (phys | pgprot_val(prot))
 
-typedef unsigned long pfn_t;
 typedef unsigned long phys_t;
 
 #endif
@@ -109,8 +105,8 @@ extern unsigned long uml_physmem;
 #define __pa(virt) to_phys((void *) (unsigned long) (virt))
 #define __va(phys) to_virt((unsigned long) (phys))
 
-#define phys_to_pfn(p) ((pfn_t) ((p) >> PAGE_SHIFT))
-#define pfn_to_phys(pfn) ((phys_t) ((pfn) << PAGE_SHIFT))
+#define phys_to_pfn(p) ((p) >> PAGE_SHIFT)
+#define pfn_to_phys(pfn) PFN_PHYS(pfn)
 
 #define pfn_valid(pfn) ((pfn) < max_mapnr)
 #define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
diff --git a/arch/um/include/asm/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h
index 2b4274e7c095..bae8523a162f 100644
--- a/arch/um/include/asm/pgtable-3level.h
+++ b/arch/um/include/asm/pgtable-3level.h
@@ -98,7 +98,7 @@ static inline unsigned long pte_pfn(pte_t pte)
 	return phys_to_pfn(pte_val(pte));
 }
 
-static inline pte_t pfn_pte(pfn_t page_nr, pgprot_t pgprot)
+static inline pte_t pfn_pte(unsigned long page_nr, pgprot_t pgprot)
 {
 	pte_t pte;
 	phys_t phys = pfn_to_phys(page_nr);
@@ -107,7 +107,7 @@ static inline pte_t pfn_pte(pfn_t page_nr, pgprot_t pgprot)
 	return pte;
 }
 
-static inline pmd_t pfn_pmd(pfn_t page_nr, pgprot_t pgprot)
+static inline pmd_t pfn_pmd(unsigned long page_nr, pgprot_t pgprot)
 {
 	return __pmd((page_nr << PAGE_SHIFT) | pgprot_val(pgprot));
 }
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index 18eb9924dda3..7485398d0737 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -271,7 +271,7 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b)
 
 #define phys_to_page(phys) pfn_to_page(phys_to_pfn(phys))
 #define __virt_to_page(virt) phys_to_page(__pa(virt))
-#define page_to_phys(page) pfn_to_phys((pfn_t) page_to_pfn(page))
+#define page_to_phys(page) pfn_to_phys(page_to_pfn(page))
 #define virt_to_page(addr) __virt_to_page((const unsigned long) addr)
 
 #define mk_pte(page, pgprot) \
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 2966adbbdf6c..5ab20620fc97 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -27,6 +27,8 @@ struct pt_regs {
 
 #define instruction_pointer(regs) PT_REGS_IP(regs)
 
+#define PTRACE_OLDSETOPTIONS 21
+
 struct task_struct;
 
 extern long subarch_ptrace(struct task_struct *child, long request,
diff --git a/arch/um/include/asm/syscall-generic.h b/arch/um/include/asm/syscall-generic.h
new file mode 100644
index 000000000000..9fb9cf8cd39a
--- /dev/null
+++ b/arch/um/include/asm/syscall-generic.h
@@ -0,0 +1,138 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for function descriptions.
+ *
+ * Copyright (C) 2015 Mickaël Salaün <mic@digikod.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UM_SYSCALL_GENERIC_H
+#define __UM_SYSCALL_GENERIC_H
+
+#include <asm/ptrace.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <sysdep/ptrace.h>
+
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+
+	return PT_REGS_SYSCALL_NR(regs);
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* do nothing */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	const long error = regs_return_value(regs);
+
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs_return_value(regs);
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	PT_REGS_SET_SYSCALL_RETURN(regs, (long) error ?: val);
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	const struct uml_pt_regs *r = &regs->regs;
+
+	switch (i) {
+	case 0:
+		if (!n--)
+			break;
+		*args++ = UPT_SYSCALL_ARG1(r);
+	case 1:
+		if (!n--)
+			break;
+		*args++ = UPT_SYSCALL_ARG2(r);
+	case 2:
+		if (!n--)
+			break;
+		*args++ = UPT_SYSCALL_ARG3(r);
+	case 3:
+		if (!n--)
+			break;
+		*args++ = UPT_SYSCALL_ARG4(r);
+	case 4:
+		if (!n--)
+			break;
+		*args++ = UPT_SYSCALL_ARG5(r);
+	case 5:
+		if (!n--)
+			break;
+		*args++ = UPT_SYSCALL_ARG6(r);
+	case 6:
+		if (!n--)
+			break;
+	default:
+		BUG();
+		break;
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	struct uml_pt_regs *r = &regs->regs;
+
+	switch (i) {
+	case 0:
+		if (!n--)
+			break;
+		UPT_SYSCALL_ARG1(r) = *args++;
+	case 1:
+		if (!n--)
+			break;
+		UPT_SYSCALL_ARG2(r) = *args++;
+	case 2:
+		if (!n--)
+			break;
+		UPT_SYSCALL_ARG3(r) = *args++;
+	case 3:
+		if (!n--)
+			break;
+		UPT_SYSCALL_ARG4(r) = *args++;
+	case 4:
+		if (!n--)
+			break;
+		UPT_SYSCALL_ARG5(r) = *args++;
+	case 5:
+		if (!n--)
+			break;
+		UPT_SYSCALL_ARG6(r) = *args++;
+	case 6:
+		if (!n--)
+			break;
+	default:
+		BUG();
+		break;
+	}
+}
+
+/* See arch/x86/um/asm/syscall.h for syscall_get_arch() definition. */
+
+#endif	/* __UM_SYSCALL_GENERIC_H */
diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h
index 53968aaf76f9..053baff03674 100644
--- a/arch/um/include/asm/thread_info.h
+++ b/arch/um/include/asm/thread_info.h
@@ -62,11 +62,13 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SYSCALL_AUDIT	6
 #define TIF_RESTORE_SIGMASK	7
 #define TIF_NOTIFY_RESUME	8
+#define TIF_SECCOMP		9	/* secure computing */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
 #define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
 
 #endif
diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h
index ad3fa3ae6d34..de5d572225f3 100644
--- a/arch/um/include/shared/os.h
+++ b/arch/um/include/shared/os.h
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -144,6 +146,8 @@ extern int os_read_file(int fd, void *buf, int len);
 extern int os_write_file(int fd, const void *buf, int count);
 extern int os_sync_file(int fd);
 extern int os_file_size(const char *file, unsigned long long *size_out);
+extern int os_pread_file(int fd, void *buf, int len, unsigned long long offset);
+extern int os_pwrite_file(int fd, const void *buf, int count, unsigned long long offset);
 extern int os_file_modtime(const char *file, unsigned long *modtime);
 extern int os_pipe(int *fd, int stream, int close_on_exec);
 extern int os_set_fd_async(int fd);
@@ -183,6 +187,7 @@ extern int create_mem_file(unsigned long long len);
 /* process.c */
 extern unsigned long os_process_pc(int pid);
 extern int os_process_parent(int pid);
+extern void os_alarm_process(int pid);
 extern void os_stop_process(int pid);
 extern void os_kill_process(int pid, int reap_child);
 extern void os_kill_ptraced_process(int pid, int reap_child);
@@ -217,7 +222,7 @@ extern int set_umid(char *name);
 extern char *get_umid(void);
 
 /* signal.c */
-extern void timer_init(void);
+extern void timer_set_signal_handler(void);
 extern void set_sigstack(void *sig_stack, int size);
 extern void remove_sigstack(void);
 extern void set_handler(int sig);
@@ -227,6 +232,7 @@ extern void unblock_signals(void);
 extern int get_signals(void);
 extern int set_signals(int enable);
 extern int os_is_signal_stack(void);
+extern void deliver_alarm(void);
 
 /* util.c */
 extern void stack_protections(unsigned long address);
@@ -238,12 +244,16 @@ extern void um_early_printk(const char *s, unsigned int n);
 extern void os_fix_helper_signals(void);
 
 /* time.c */
-extern void idle_sleep(unsigned long long nsecs);
-extern int set_interval(void);
-extern int timer_one_shot(int ticks);
-extern long long disable_timer(void);
+extern void os_idle_sleep(unsigned long long nsecs);
+extern int os_timer_create(void* timer);
+extern int os_timer_set_interval(void* timer, void* its);
+extern int os_timer_one_shot(int ticks);
+extern long long os_timer_disable(void);
+extern long os_timer_remain(void* timer);
 extern void uml_idle_timer(void);
+extern long long os_persistent_clock_emulation(void);
 extern long long os_nsecs(void);
+extern long long os_vnsecs(void);
 
 /* skas/mem.c */
 extern long run_syscall_stub(struct mm_id * mm_idp,
diff --git a/arch/um/include/shared/skas/stub-data.h b/arch/um/include/shared/skas/stub-data.h
index f6ed92c3727d..a9deece956bf 100644
--- a/arch/um/include/shared/skas/stub-data.h
+++ b/arch/um/include/shared/skas/stub-data.h
@@ -1,4 +1,6 @@
 /*
+
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2005 Jeff Dike (jdike@karaya.com)
  * Licensed under the GPL
  */
@@ -6,12 +8,11 @@
 #ifndef __STUB_DATA_H
 #define __STUB_DATA_H
 
-#include <sys/time.h>
+#include <time.h>
 
 struct stub_data {
-	long offset;
+	unsigned long offset;
 	int fd;
-	struct itimerval timer;
 	long err;
 };
 
diff --git a/arch/um/include/shared/timer-internal.h b/arch/um/include/shared/timer-internal.h
new file mode 100644
index 000000000000..03e6f217f807
--- /dev/null
+++ b/arch/um/include/shared/timer-internal.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2012 - 2014 Cisco Systems
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
+#ifndef __TIMER_INTERNAL_H__
+#define __TIMER_INTERNAL_H__
+
+#define TIMER_MULTIPLIER 256
+#define TIMER_MIN_DELTA  500
+
+#endif
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index a6d922672b9f..48af59aae129 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Copyright 2003 PathScale, Inc.
  * Licensed under the GPL
@@ -27,6 +29,7 @@
 #include <kern_util.h>
 #include <os.h>
 #include <skas.h>
+#include <timer-internal.h>
 
 /*
  * This is a per-cpu array.  A processor only modifies its entry and it only
@@ -203,11 +206,8 @@ void initial_thread_cb(void (*proc)(void *), void *arg)
 
 void arch_cpu_idle(void)
 {
-	unsigned long long nsecs;
-
 	cpu_tasks[current_thread_info()->cpu].pid = os_getpid();
-	nsecs = disable_timer();
-	idle_sleep(nsecs);
+	os_idle_sleep(UM_NSEC_PER_SEC);
 	local_irq_enable();
 }
 
diff --git a/arch/um/kernel/reboot.c b/arch/um/kernel/reboot.c
index 9bdf67a092a5..b60a9f8cda75 100644
--- a/arch/um/kernel/reboot.c
+++ b/arch/um/kernel/reboot.c
@@ -12,6 +12,7 @@
 #include <skas.h>
 
 void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
 
 static void kill_off_processes(void)
 {
diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c
index 289771dadf81..0f25d41b1031 100644
--- a/arch/um/kernel/skas/clone.c
+++ b/arch/um/kernel/skas/clone.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -35,11 +36,6 @@ stub_clone_handler(void)
 	if (err)
 		goto out;
 
-	err = stub_syscall3(__NR_setitimer, ITIMER_VIRTUAL,
-			    (long) &data->timer, 0);
-	if (err)
-		goto out;
-
 	remap_stack(data->fd, data->offset);
 	goto done;
 
diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c
index fda1deba1757..3943e9d7d13d 100644
--- a/arch/um/kernel/skas/mmu.c
+++ b/arch/um/kernel/skas/mmu.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -30,7 +31,7 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc,
 	if (!pmd)
 		goto out_pmd;
 
-	pte = pte_alloc_map(mm, NULL, pmd, proc);
+	pte = pte_alloc_map(mm, pmd, proc);
 	if (!pte)
 		goto out_pte;
 
@@ -61,10 +62,12 @@ int init_new_context(struct task_struct *task, struct mm_struct *mm)
 	if (current->mm != NULL && current->mm != &init_mm)
 		from_mm = &current->mm->context;
 
+	block_signals();
 	if (from_mm)
 		to_mm->id.u.pid = copy_context_skas0(stack,
 						     from_mm->id.u.pid);
 	else to_mm->id.u.pid = start_userspace(stack);
+	unblock_signals();
 
 	if (to_mm->id.u.pid < 0) {
 		ret = to_mm->id.u.pid;
diff --git a/arch/um/kernel/skas/syscall.c b/arch/um/kernel/skas/syscall.c
index d9ec0068b623..48b0dcbd87be 100644
--- a/arch/um/kernel/skas/syscall.c
+++ b/arch/um/kernel/skas/syscall.c
@@ -5,40 +5,38 @@
 
 #include <linux/kernel.h>
 #include <linux/ptrace.h>
+#include <linux/seccomp.h>
 #include <kern_util.h>
 #include <sysdep/ptrace.h>
+#include <sysdep/ptrace_user.h>
 #include <sysdep/syscalls.h>
 
-extern int syscall_table_size;
-#define NR_SYSCALLS (syscall_table_size / sizeof(void *))
-
 void handle_syscall(struct uml_pt_regs *r)
 {
 	struct pt_regs *regs = container_of(r, struct pt_regs, regs);
-	long result;
 	int syscall;
 
-	if (syscall_trace_enter(regs)) {
-		result = -ENOSYS;
+	/* Initialize the syscall number and default return value. */
+	UPT_SYSCALL_NR(r) = PT_SYSCALL_NR(r->gp);
+	PT_REGS_SET_SYSCALL_RETURN(regs, -ENOSYS);
+
+	/* Do the secure computing check first; failures should be fast. */
+	if (secure_computing() == -1)
+		return;
+
+	if (syscall_trace_enter(regs))
 		goto out;
-	}
-
-	/*
-	 * This should go in the declaration of syscall, but when I do that,
-	 * strace -f -c bash -c 'ls ; ls' breaks, sometimes not tracing
-	 * children at all, sometimes hanging when bash doesn't see the first
-	 * ls exit.
-	 * The assembly looks functionally the same to me.  This is
-	 *     gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)
-	 * in case it's a compiler bug.
+
+	/* Update the syscall number after orig_ax has potentially been updated
+	 * with ptrace.
 	 */
+	UPT_SYSCALL_NR(r) = PT_SYSCALL_NR(r->gp);
 	syscall = UPT_SYSCALL_NR(r);
-	if ((syscall >= NR_SYSCALLS) || (syscall < 0))
-		result = -ENOSYS;
-	else result = EXECUTE_SYSCALL(syscall, regs);
 
-out:
-	PT_REGS_SET_SYSCALL_RETURN(regs, result);
+	if (syscall >= 0 && syscall <= __NR_syscall_max)
+		PT_REGS_SET_SYSCALL_RETURN(regs,
+				EXECUTE_SYSCALL(syscall, regs));
 
+out:
 	syscall_trace_leave(regs);
 }
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 5af441efb377..25c23666d592 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -1,4 +1,7 @@
 /*
+ * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
+ * Copyright (C) 2012-2014 Cisco Systems
  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -7,11 +10,15 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
 #include <linux/threads.h>
 #include <asm/irq.h>
 #include <asm/param.h>
 #include <kern_util.h>
 #include <os.h>
+#include <timer-internal.h>
 
 void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 {
@@ -24,81 +31,97 @@ void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 
 static int itimer_shutdown(struct clock_event_device *evt)
 {
-	disable_timer();
+	os_timer_disable();
 	return 0;
 }
 
 static int itimer_set_periodic(struct clock_event_device *evt)
 {
-	set_interval();
+	os_timer_set_interval(NULL, NULL);
 	return 0;
 }
 
 static int itimer_next_event(unsigned long delta,
 			     struct clock_event_device *evt)
 {
-	return timer_one_shot(delta + 1);
+	return os_timer_one_shot(delta);
 }
 
-static struct clock_event_device itimer_clockevent = {
-	.name			= "itimer",
+static int itimer_one_shot(struct clock_event_device *evt)
+{
+	os_timer_one_shot(1);
+	return 0;
+}
+
+static struct clock_event_device timer_clockevent = {
+	.name			= "posix-timer",
 	.rating			= 250,
 	.cpumask		= cpu_all_mask,
 	.features		= CLOCK_EVT_FEAT_PERIODIC |
 				  CLOCK_EVT_FEAT_ONESHOT,
 	.set_state_shutdown	= itimer_shutdown,
 	.set_state_periodic	= itimer_set_periodic,
-	.set_state_oneshot	= itimer_shutdown,
+	.set_state_oneshot	= itimer_one_shot,
 	.set_next_event		= itimer_next_event,
-	.shift			= 32,
+	.shift			= 0,
+	.max_delta_ns		= 0xffffffff,
+	.min_delta_ns		= TIMER_MIN_DELTA, //microsecond resolution should be enough for anyone, same as 640K RAM
 	.irq			= 0,
+	.mult			= 1,
 };
 
 static irqreturn_t um_timer(int irq, void *dev)
 {
-	(*itimer_clockevent.event_handler)(&itimer_clockevent);
+	if (get_current()->mm != NULL)
+	{
+        /* userspace - relay signal, results in correct userspace timers */
+		os_alarm_process(get_current()->mm->context.id.u.pid);
+	}
+
+	(*timer_clockevent.event_handler)(&timer_clockevent);
 
 	return IRQ_HANDLED;
 }
 
-static cycle_t itimer_read(struct clocksource *cs)
+static cycle_t timer_read(struct clocksource *cs)
 {
-	return os_nsecs() / 1000;
+	return os_nsecs() / TIMER_MULTIPLIER;
 }
 
-static struct clocksource itimer_clocksource = {
-	.name		= "itimer",
+static struct clocksource timer_clocksource = {
+	.name		= "timer",
 	.rating		= 300,
-	.read		= itimer_read,
+	.read		= timer_read,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init setup_itimer(void)
+static void __init timer_setup(void)
 {
 	int err;
 
-	err = request_irq(TIMER_IRQ, um_timer, 0, "timer", NULL);
+	err = request_irq(TIMER_IRQ, um_timer, IRQF_TIMER, "hr timer", NULL);
 	if (err != 0)
 		printk(KERN_ERR "register_timer : request_irq failed - "
 		       "errno = %d\n", -err);
 
-	itimer_clockevent.mult = div_sc(HZ, NSEC_PER_SEC, 32);
-	itimer_clockevent.max_delta_ns =
-		clockevent_delta2ns(60 * HZ, &itimer_clockevent);
-	itimer_clockevent.min_delta_ns =
-		clockevent_delta2ns(1, &itimer_clockevent);
-	err = clocksource_register_hz(&itimer_clocksource, USEC_PER_SEC);
+	err = os_timer_create(NULL);
+	if (err != 0) {
+		printk(KERN_ERR "creation of timer failed - errno = %d\n", -err);
+		return;
+	}
+
+	err = clocksource_register_hz(&timer_clocksource, NSEC_PER_SEC/TIMER_MULTIPLIER);
 	if (err) {
 		printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
 		return;
 	}
-	clockevents_register_device(&itimer_clockevent);
+	clockevents_register_device(&timer_clockevent);
 }
 
 void read_persistent_clock(struct timespec *ts)
 {
-	long long nsecs = os_nsecs();
+	long long nsecs = os_persistent_clock_emulation();
 
 	set_normalized_timespec(ts, nsecs / NSEC_PER_SEC,
 				nsecs % NSEC_PER_SEC);
@@ -106,6 +129,6 @@ void read_persistent_clock(struct timespec *ts)
 
 void __init time_init(void)
 {
-	timer_init();
-	late_time_init = setup_itimer;
+	timer_set_signal_handler();
+	late_time_init = timer_setup;
 }
diff --git a/arch/um/kernel/tlb.c b/arch/um/kernel/tlb.c
index 2077248e8a72..3777b82759bd 100644
--- a/arch/um/kernel/tlb.c
+++ b/arch/um/kernel/tlb.c
@@ -50,6 +50,13 @@ struct host_vm_change {
 	   .index	= 0, \
 	   .force	= force })
 
+static void report_enomem(void)
+{
+	printk(KERN_ERR "UML ran out of memory on the host side! "
+			"This can happen due to a memory limitation or "
+			"vm.max_map_count has been reached.\n");
+}
+
 static int do_ops(struct host_vm_change *hvc, int end,
 		  int finished)
 {
@@ -81,6 +88,9 @@ static int do_ops(struct host_vm_change *hvc, int end,
 		}
 	}
 
+	if (ret == -ENOMEM)
+		report_enomem();
+
 	return ret;
 }
 
@@ -433,8 +443,12 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long address)
 	else if (pte_newprot(*pte))
 		err = protect(mm_id, address, PAGE_SIZE, prot, 1, &flush);
 
-	if (err)
+	if (err) {
+		if (err == -ENOMEM)
+			report_enomem();
+
 		goto kill;
+	}
 
 	*pte = pte_mkuptodate(*pte);
 
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 26e0164895e4..2db18cbbb0ea 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -264,6 +264,15 @@ int os_read_file(int fd, void *buf, int len)
 	return n;
 }
 
+int os_pread_file(int fd, void *buf, int len, unsigned long long offset)
+{
+	int n = pread(fd, buf, len, offset);
+
+	if (n < 0)
+		return -errno;
+	return n;
+}
+
 int os_write_file(int fd, const void *buf, int len)
 {
 	int n = write(fd, (void *) buf, len);
@@ -282,6 +291,16 @@ int os_sync_file(int fd)
 	return n;
 }
 
+int os_pwrite_file(int fd, const void *buf, int len, unsigned long long offset)
+{
+	int n = pwrite(fd, (void *) buf, len, offset);
+
+	if (n < 0)
+		return -errno;
+	return n;
+}
+
+
 int os_file_size(const char *file, unsigned long long *size_out)
 {
 	struct uml_stat buf;
diff --git a/arch/um/os-Linux/internal.h b/arch/um/os-Linux/internal.h
deleted file mode 100644
index 0dc2c9f135f6..000000000000
--- a/arch/um/os-Linux/internal.h
+++ /dev/null
@@ -1 +0,0 @@
-void alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc);
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index df9191acd926..9d499de87e63 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -163,13 +164,13 @@ int __init main(int argc, char **argv, char **envp)
 
 	/*
 	 * This signal stuff used to be in the reboot case.  However,
-	 * sometimes a SIGVTALRM can come in when we're halting (reproducably
+	 * sometimes a timer signal can come in when we're halting (reproducably
 	 * when writing out gcov information, presumably because that takes
 	 * some time) and cause a segfault.
 	 */
 
-	/* stop timers and set SIGVTALRM to be ignored */
-	disable_timer();
+	/* stop timers and set timer signal to be ignored */
+	os_timer_disable();
 
 	/* disable SIGIO for the fds and set SIGIO to be ignored */
 	err = deactivate_all_fds();
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 897e9ad0c108..8b1767668515 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -106,6 +106,17 @@ static int __init make_tempfile(const char *template)
 		}
 	}
 
+#ifdef O_TMPFILE
+	fd = open(tempdir, O_CLOEXEC | O_RDWR | O_EXCL | O_TMPFILE, 0700);
+	/*
+	 * If the running system does not support O_TMPFILE flag then retry
+	 * without it.
+	 */
+	if (fd != -1 || (errno != EINVAL && errno != EISDIR &&
+			errno != EOPNOTSUPP))
+		return fd;
+#endif
+
 	tempname = malloc(strlen(tempdir) + strlen(template) + 1);
 	if (tempname == NULL)
 		return -1;
@@ -142,12 +153,6 @@ static int __init create_tmp_file(unsigned long long len)
 	if (fd < 0)
 		exit(1);
 
-	err = fchmod(fd, 0777);
-	if (err < 0) {
-		perror("fchmod");
-		exit(1);
-	}
-
 	/*
 	 * Seek to len - 1 because writing a character there will
 	 * increase the file size by one byte, to the desired length.
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 8408aba915b2..b3e0d40932e1 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -89,6 +90,11 @@ int os_process_parent(int pid)
 	return parent;
 }
 
+void os_alarm_process(int pid)
+{
+	kill(pid, SIGALRM);
+}
+
 void os_stop_process(int pid)
 {
 	kill(pid, SIGSTOP);
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 036d0dbc7b52..7801666514ed 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -1,4 +1,6 @@
 /*
+ * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2004 PathScale, Inc
  * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
@@ -13,7 +15,6 @@
 #include <kern_util.h>
 #include <os.h>
 #include <sysdep/mcontext.h>
-#include "internal.h"
 
 void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
 	[SIGTRAP]	= relay_signal,
@@ -23,7 +24,8 @@ void (*sig_info[NSIG])(int, struct siginfo *, struct uml_pt_regs *) = {
 	[SIGBUS]	= bus_handler,
 	[SIGSEGV]	= segv_handler,
 	[SIGIO]		= sigio_handler,
-	[SIGVTALRM]	= timer_handler };
+	[SIGALRM]	= timer_handler
+};
 
 static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
 {
@@ -38,7 +40,7 @@ static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
 	}
 
 	/* enable signals if sig isn't IRQ signal */
-	if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGVTALRM))
+	if ((sig != SIGIO) && (sig != SIGWINCH) && (sig != SIGALRM))
 		unblock_signals();
 
 	(*sig_info[sig])(sig, si, &r);
@@ -55,11 +57,12 @@ static void sig_handler_common(int sig, struct siginfo *si, mcontext_t *mc)
 #define SIGIO_BIT 0
 #define SIGIO_MASK (1 << SIGIO_BIT)
 
-#define SIGVTALRM_BIT 1
-#define SIGVTALRM_MASK (1 << SIGVTALRM_BIT)
+#define SIGALRM_BIT 1
+#define SIGALRM_MASK (1 << SIGALRM_BIT)
 
 static int signals_enabled;
 static unsigned int signals_pending;
+static unsigned int signals_active = 0;
 
 void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
 {
@@ -78,36 +81,43 @@ void sig_handler(int sig, struct siginfo *si, mcontext_t *mc)
 	set_signals(enabled);
 }
 
-static void real_alarm_handler(mcontext_t *mc)
+static void timer_real_alarm_handler(mcontext_t *mc)
 {
 	struct uml_pt_regs regs;
 
 	if (mc != NULL)
 		get_regs_from_mc(&regs, mc);
-	regs.is_user = 0;
-	unblock_signals();
-	timer_handler(SIGVTALRM, NULL, &regs);
+	timer_handler(SIGALRM, NULL, &regs);
 }
 
-void alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
+void timer_alarm_handler(int sig, struct siginfo *unused_si, mcontext_t *mc)
 {
 	int enabled;
 
 	enabled = signals_enabled;
 	if (!signals_enabled) {
-		signals_pending |= SIGVTALRM_MASK;
+		signals_pending |= SIGALRM_MASK;
 		return;
 	}
 
 	block_signals();
 
-	real_alarm_handler(mc);
+	signals_active |= SIGALRM_MASK;
+
+	timer_real_alarm_handler(mc);
+
+	signals_active &= ~SIGALRM_MASK;
+
 	set_signals(enabled);
 }
 
-void timer_init(void)
+void deliver_alarm(void) {
+    timer_alarm_handler(SIGALRM, NULL, NULL);
+}
+
+void timer_set_signal_handler(void)
 {
-	set_handler(SIGVTALRM);
+	set_handler(SIGALRM);
 }
 
 void set_sigstack(void *sig_stack, int size)
@@ -131,10 +141,9 @@ static void (*handlers[_NSIG])(int sig, struct siginfo *si, mcontext_t *mc) = {
 
 	[SIGIO] = sig_handler,
 	[SIGWINCH] = sig_handler,
-	[SIGVTALRM] = alarm_handler
+	[SIGALRM] = timer_alarm_handler
 };
 
-
 static void hard_handler(int sig, siginfo_t *si, void *p)
 {
 	struct ucontext *uc = p;
@@ -188,9 +197,9 @@ void set_handler(int sig)
 
 	/* block irq ones */
 	sigemptyset(&action.sa_mask);
-	sigaddset(&action.sa_mask, SIGVTALRM);
 	sigaddset(&action.sa_mask, SIGIO);
 	sigaddset(&action.sa_mask, SIGWINCH);
+	sigaddset(&action.sa_mask, SIGALRM);
 
 	if (sig == SIGSEGV)
 		flags |= SA_NODEFER;
@@ -283,8 +292,16 @@ void unblock_signals(void)
 		if (save_pending & SIGIO_MASK)
 			sig_handler_common(SIGIO, NULL, NULL);
 
-		if (save_pending & SIGVTALRM_MASK)
-			real_alarm_handler(NULL);
+		/* Do not reenter the handler */
+
+		if ((save_pending & SIGALRM_MASK) && (!(signals_active & SIGALRM_MASK)))
+			timer_real_alarm_handler(NULL);
+
+		/* Rerun the loop only if there is still pending SIGIO and not in TIMER handler */
+
+		if (!(signals_pending & SIGIO_MASK) && (signals_active & SIGALRM_MASK))
+			return;
+
 	}
 }
 
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 3dddedba3a07..23025d645160 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2002- 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -45,7 +46,7 @@ static int ptrace_dump_regs(int pid)
  * Signals that are OK to receive in the stub - we'll just continue it.
  * SIGWINCH will happen when UML is inside a detached screen.
  */
-#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
+#define STUB_SIG_MASK ((1 << SIGALRM) | (1 << SIGWINCH))
 
 /* Signals that the stub will finish with - anything else is an error */
 #define STUB_DONE_MASK (1 << SIGTRAP)
@@ -137,9 +138,6 @@ static void handle_trap(int pid, struct uml_pt_regs *regs,
 	if ((UPT_IP(regs) >= STUB_START) && (UPT_IP(regs) < STUB_END))
 		fatal_sigsegv();
 
-	/* Mark this as a syscall */
-	UPT_SYSCALL_NR(regs) = PT_SYSCALL_NR(regs->gp);
-
 	if (!local_using_sysemu)
 	{
 		err = ptrace(PTRACE_POKEUSER, pid, PT_SYSCALL_NR_OFFSET,
@@ -179,19 +177,13 @@ extern char __syscall_stub_start[];
 static int userspace_tramp(void *stack)
 {
 	void *addr;
-	int err, fd;
+	int fd;
 	unsigned long long offset;
 
 	ptrace(PTRACE_TRACEME, 0, 0, 0);
 
 	signal(SIGTERM, SIG_DFL);
 	signal(SIGWINCH, SIG_IGN);
-	err = set_interval();
-	if (err) {
-		printk(UM_KERN_ERR "userspace_tramp - setting timer failed, "
-		       "errno = %d\n", err);
-		exit(1);
-	}
 
 	/*
 	 * This has a pte, but it can't be mapped in with the usual
@@ -282,7 +274,7 @@ int start_userspace(unsigned long stub_stack)
 			       "errno = %d\n", errno);
 			goto out_kill;
 		}
-	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
+	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGALRM));
 
 	if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) {
 		err = -EINVAL;
@@ -315,8 +307,6 @@ int start_userspace(unsigned long stub_stack)
 
 void userspace(struct uml_pt_regs *regs)
 {
-	struct itimerval timer;
-	unsigned long long nsecs, now;
 	int err, status, op, pid = userspace_pid[0];
 	/* To prevent races if using_sysemu changes under us.*/
 	int local_using_sysemu;
@@ -325,13 +315,8 @@ void userspace(struct uml_pt_regs *regs)
 	/* Handle any immediate reschedules or signals */
 	interrupt_end();
 
-	if (getitimer(ITIMER_VIRTUAL, &timer))
-		printk(UM_KERN_ERR "Failed to get itimer, errno = %d\n", errno);
-	nsecs = timer.it_value.tv_sec * UM_NSEC_PER_SEC +
-		timer.it_value.tv_usec * UM_NSEC_PER_USEC;
-	nsecs += os_nsecs();
-
 	while (1) {
+
 		/*
 		 * This can legitimately fail if the process loads a
 		 * bogus value into a segment register.  It will
@@ -401,18 +386,7 @@ void userspace(struct uml_pt_regs *regs)
 			case SIGTRAP:
 				relay_signal(SIGTRAP, (struct siginfo *)&si, regs);
 				break;
-			case SIGVTALRM:
-				now = os_nsecs();
-				if (now < nsecs)
-					break;
-				block_signals();
-				(*sig_info[sig])(sig, (struct siginfo *)&si, regs);
-				unblock_signals();
-				nsecs = timer.it_value.tv_sec *
-					UM_NSEC_PER_SEC +
-					timer.it_value.tv_usec *
-					UM_NSEC_PER_USEC;
-				nsecs += os_nsecs();
+			case SIGALRM:
 				break;
 			case SIGIO:
 			case SIGILL:
@@ -460,7 +434,6 @@ __initcall(init_thread_regs);
 
 int copy_context_skas0(unsigned long new_stack, int pid)
 {
-	struct timeval tv = { .tv_sec = 0, .tv_usec = UM_USEC_PER_SEC / UM_HZ };
 	int err;
 	unsigned long current_stack = current_stub_stack();
 	struct stub_data *data = (struct stub_data *) current_stack;
@@ -472,11 +445,10 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 	 * prepare offset and fd of child's stack as argument for parent's
 	 * and child's mmap2 calls
 	 */
-	*data = ((struct stub_data) { .offset	= MMAP_OFFSET(new_offset),
-				      .fd	= new_fd,
-				      .timer    = ((struct itimerval)
-					           { .it_value = tv,
-						     .it_interval = tv }) });
+	*data = ((struct stub_data) {
+			.offset	= MMAP_OFFSET(new_offset),
+			.fd     = new_fd
+	});
 
 	err = ptrace_setregs(pid, thread_regs);
 	if (err < 0) {
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 47f1ff056a54..22a358ef1b0c 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -94,6 +94,8 @@ static int start_ptraced_child(void)
 {
 	int pid, n, status;
 
+	fflush(stdout);
+
 	pid = fork();
 	if (pid == 0)
 		ptrace_child();
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index e9824d5dd7d5..0e39b9978729 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -1,4 +1,7 @@
 /*
+ * Copyright (C) 2015 Anton Ivanov (aivanov@{brocade.com,kot-begemot.co.uk})
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
+ * Copyright (C) 2012-2014 Cisco Systems
  * Copyright (C) 2000 - 2007 Jeff Dike (jdike{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -10,177 +13,177 @@
 #include <sys/time.h>
 #include <kern_util.h>
 #include <os.h>
-#include "internal.h"
+#include <string.h>
+#include <timer-internal.h>
 
-int set_interval(void)
-{
-	int usec = UM_USEC_PER_SEC / UM_HZ;
-	struct itimerval interval = ((struct itimerval) { { 0, usec },
-							  { 0, usec } });
-
-	if (setitimer(ITIMER_VIRTUAL, &interval, NULL) == -1)
-		return -errno;
+static timer_t event_high_res_timer = 0;
 
-	return 0;
+static inline long long timeval_to_ns(const struct timeval *tv)
+{
+	return ((long long) tv->tv_sec * UM_NSEC_PER_SEC) +
+		tv->tv_usec * UM_NSEC_PER_USEC;
 }
 
-int timer_one_shot(int ticks)
+static inline long long timespec_to_ns(const struct timespec *ts)
 {
-	unsigned long usec = ticks * UM_USEC_PER_SEC / UM_HZ;
-	unsigned long sec = usec / UM_USEC_PER_SEC;
-	struct itimerval interval;
-
-	usec %= UM_USEC_PER_SEC;
-	interval = ((struct itimerval) { { 0, 0 }, { sec, usec } });
+	return ((long long) ts->tv_sec * UM_NSEC_PER_SEC) +
+		ts->tv_nsec;
+}
 
-	if (setitimer(ITIMER_VIRTUAL, &interval, NULL) == -1)
-		return -errno;
+long long os_persistent_clock_emulation (void) {
+	struct timespec realtime_tp;
 
-	return 0;
+	clock_gettime(CLOCK_REALTIME, &realtime_tp);
+	return timespec_to_ns(&realtime_tp);
 }
 
 /**
- * timeval_to_ns - Convert timeval to nanoseconds
- * @ts:		pointer to the timeval variable to be converted
- *
- * Returns the scalar nanosecond representation of the timeval
- * parameter.
- *
- * Ripped from linux/time.h because it's a kernel header, and thus
- * unusable from here.
+ * os_timer_create() - create an new posix (interval) timer
  */
-static inline long long timeval_to_ns(const struct timeval *tv)
-{
-	return ((long long) tv->tv_sec * UM_NSEC_PER_SEC) +
-		tv->tv_usec * UM_NSEC_PER_USEC;
+int os_timer_create(void* timer) {
+
+	timer_t* t = timer;
+
+	if(t == NULL) {
+		t = &event_high_res_timer;
+	}
+
+	if (timer_create(
+		CLOCK_MONOTONIC,
+		NULL,
+		t) == -1) {
+		return -1;
+	}
+	return 0;
 }
 
-long long disable_timer(void)
+int os_timer_set_interval(void* timer, void* i)
 {
-	struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } });
-	long long remain, max = UM_NSEC_PER_SEC / UM_HZ;
+	struct itimerspec its;
+	unsigned long long nsec;
+	timer_t* t = timer;
+	struct itimerspec* its_in = i;
 
-	if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
-		printk(UM_KERN_ERR "disable_timer - setitimer failed, "
-		       "errno = %d\n", errno);
+	if(t == NULL) {
+		t = &event_high_res_timer;
+	}
 
-	remain = timeval_to_ns(&time.it_value);
-	if (remain > max)
-		remain = max;
+	nsec = UM_NSEC_PER_SEC / UM_HZ;
 
-	return remain;
-}
+	if(its_in != NULL) {
+		its.it_value.tv_sec = its_in->it_value.tv_sec;
+		its.it_value.tv_nsec = its_in->it_value.tv_nsec;
+	} else {
+		its.it_value.tv_sec = 0;
+		its.it_value.tv_nsec = nsec;
+	}
 
-long long os_nsecs(void)
-{
-	struct timeval tv;
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = nsec;
 
-	gettimeofday(&tv, NULL);
-	return timeval_to_ns(&tv);
-}
+	if(timer_settime(*t, 0, &its, NULL) == -1) {
+		return -errno;
+	}
 
-#ifdef UML_CONFIG_NO_HZ_COMMON
-static int after_sleep_interval(struct timespec *ts)
-{
 	return 0;
 }
 
-static void deliver_alarm(void)
+/**
+ * os_timer_remain() - returns the remaining nano seconds of the given interval
+ *                     timer
+ * Because this is the remaining time of an interval timer, which correspondends
+ * to HZ, this value can never be bigger than one second. Just
+ * the nanosecond part of the timer is returned.
+ * The returned time is relative to the start time of the interval timer.
+ * Return an negative value in an error case.
+ */
+long os_timer_remain(void* timer)
 {
-	alarm_handler(SIGVTALRM, NULL, NULL);
-}
+	struct itimerspec its;
+	timer_t* t = timer;
 
-static unsigned long long sleep_time(unsigned long long nsecs)
-{
-	return nsecs;
-}
+	if(t == NULL) {
+		t = &event_high_res_timer;
+	}
 
-#else
-unsigned long long last_tick;
-unsigned long long skew;
+	if(timer_gettime(t, &its) == -1) {
+		return -errno;
+	}
 
-static void deliver_alarm(void)
-{
-	unsigned long long this_tick = os_nsecs();
-	int one_tick = UM_NSEC_PER_SEC / UM_HZ;
+	return its.it_value.tv_nsec;
+}
 
-	/* Protection against the host's time going backwards */
-	if ((last_tick != 0) && (this_tick < last_tick))
-		this_tick = last_tick;
+int os_timer_one_shot(int ticks)
+{
+	struct itimerspec its;
+	unsigned long long nsec;
+	unsigned long sec;
 
-	if (last_tick == 0)
-		last_tick = this_tick - one_tick;
+    nsec = (ticks + 1);
+    sec = nsec / UM_NSEC_PER_SEC;
+	nsec = nsec % UM_NSEC_PER_SEC;
 
-	skew += this_tick - last_tick;
+	its.it_value.tv_sec = nsec / UM_NSEC_PER_SEC;
+	its.it_value.tv_nsec = nsec;
 
-	while (skew >= one_tick) {
-		alarm_handler(SIGVTALRM, NULL, NULL);
-		skew -= one_tick;
-	}
+	its.it_interval.tv_sec = 0;
+	its.it_interval.tv_nsec = 0; // we cheat here
 
-	last_tick = this_tick;
+	timer_settime(event_high_res_timer, 0, &its, NULL);
+	return 0;
 }
 
-static unsigned long long sleep_time(unsigned long long nsecs)
+/**
+ * os_timer_disable() - disable the posix (interval) timer
+ * Returns the remaining interval timer time in nanoseconds
+ */
+long long os_timer_disable(void)
 {
-	return nsecs > skew ? nsecs - skew : 0;
-}
+	struct itimerspec its;
 
-static inline long long timespec_to_us(const struct timespec *ts)
-{
-	return ((long long) ts->tv_sec * UM_USEC_PER_SEC) +
-		ts->tv_nsec / UM_NSEC_PER_USEC;
+	memset(&its, 0, sizeof(struct itimerspec));
+	timer_settime(event_high_res_timer, 0, &its, &its);
+
+	return its.it_value.tv_sec * UM_NSEC_PER_SEC + its.it_value.tv_nsec;
 }
 
-static int after_sleep_interval(struct timespec *ts)
+long long os_vnsecs(void)
 {
-	int usec = UM_USEC_PER_SEC / UM_HZ;
-	long long start_usecs = timespec_to_us(ts);
-	struct timeval tv;
-	struct itimerval interval;
-
-	/*
-	 * It seems that rounding can increase the value returned from
-	 * setitimer to larger than the one passed in.  Over time,
-	 * this will cause the remaining time to be greater than the
-	 * tick interval.  If this happens, then just reduce the first
-	 * tick to the interval value.
-	 */
-	if (start_usecs > usec)
-		start_usecs = usec;
-
-	start_usecs -= skew / UM_NSEC_PER_USEC;
-	if (start_usecs < 0)
-		start_usecs = 0;
+	struct timespec ts;
 
-	tv = ((struct timeval) { .tv_sec  = start_usecs / UM_USEC_PER_SEC,
-				 .tv_usec = start_usecs % UM_USEC_PER_SEC });
-	interval = ((struct itimerval) { { 0, usec }, tv });
+	clock_gettime(CLOCK_PROCESS_CPUTIME_ID,&ts);
+	return timespec_to_ns(&ts);
+}
 
-	if (setitimer(ITIMER_VIRTUAL, &interval, NULL) == -1)
-		return -errno;
+long long os_nsecs(void)
+{
+	struct timespec ts;
 
-	return 0;
+	clock_gettime(CLOCK_MONOTONIC,&ts);
+	return timespec_to_ns(&ts);
 }
-#endif
 
-void idle_sleep(unsigned long long nsecs)
+/**
+ * os_idle_sleep() - sleep for a given time of nsecs
+ * @nsecs: nanoseconds to sleep
+ */
+void os_idle_sleep(unsigned long long nsecs)
 {
 	struct timespec ts;
 
-	/*
-	 * nsecs can come in as zero, in which case, this starts a
-	 * busy loop.  To prevent this, reset nsecs to the tick
-	 * interval if it is zero.
-	 */
-	if (nsecs == 0)
-		nsecs = UM_NSEC_PER_SEC / UM_HZ;
+	if (nsecs <= 0) {
+		return;
+	}
 
-	nsecs = sleep_time(nsecs);
-	ts = ((struct timespec) { .tv_sec	= nsecs / UM_NSEC_PER_SEC,
-				  .tv_nsec	= nsecs % UM_NSEC_PER_SEC });
+	ts = ((struct timespec) {
+			.tv_sec  = nsecs / UM_NSEC_PER_SEC,
+			.tv_nsec = nsecs % UM_NSEC_PER_SEC
+	});
 
-	if (nanosleep(&ts, &ts) == 0)
+	/*
+	 * Relay the signal if clock_nanosleep is interrupted.
+	 */
+	if (clock_nanosleep(CLOCK_MONOTONIC, 0, &ts, NULL)) {
 		deliver_alarm();
-	after_sleep_interval(&ts);
+	}
 }
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index c9faddc61100..e5602ee9c610 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -1,10 +1,10 @@
 config UNICORE32
 	def_bool y
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
 	select HAVE_MEMBLOCK
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_DMA_ATTRS
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select GENERIC_ATOMIC64
@@ -33,9 +33,6 @@ config NO_IOPORT_MAP
 config STACKTRACE_SUPPORT
 	def_bool y
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 config LOCKDEP_SUPPORT
 	def_bool y
 
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
index 1a3626239843..f075bbe1d46f 100644
--- a/arch/unicore32/Kconfig.debug
+++ b/arch/unicore32/Kconfig.debug
@@ -2,20 +2,6 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
-
-          If in doubt, say Y.
-
 config EARLY_PRINTK
 	def_bool DEBUG_OCD
 	help
diff --git a/arch/unicore32/include/asm/checksum.h b/arch/unicore32/include/asm/checksum.h
index f55c3f937c3e..23ceb9e3a89b 100644
--- a/arch/unicore32/include/asm/checksum.h
+++ b/arch/unicore32/include/asm/checksum.h
@@ -20,8 +20,8 @@
  */
 
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	__asm__(
 	"add.a	%0, %1, %2\n"
diff --git a/arch/unicore32/include/asm/dma-mapping.h b/arch/unicore32/include/asm/dma-mapping.h
index 8140e053ccd3..4749854afd03 100644
--- a/arch/unicore32/include/asm/dma-mapping.h
+++ b/arch/unicore32/include/asm/dma-mapping.h
@@ -28,8 +28,6 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 	return &swiotlb_dma_map_ops;
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
 	if (dev && dev->dma_mask)
diff --git a/arch/unicore32/include/asm/mmu_context.h b/arch/unicore32/include/asm/mmu_context.h
index 1cb5220afaf9..e35632ef23c7 100644
--- a/arch/unicore32/include/asm/mmu_context.h
+++ b/arch/unicore32/include/asm/mmu_context.h
@@ -97,4 +97,16 @@ static inline void arch_bprm_mm_init(struct mm_struct *mm,
 {
 }
 
+static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
+		bool write, bool foreign)
+{
+	/* by default, allow everything */
+	return true;
+}
+
+static inline bool arch_pte_access_permitted(pte_t pte, bool write)
+{
+	/* by default, allow everything */
+	return true;
+}
 #endif
diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h
index 38b3f3785c3c..37e55d018de5 100644
--- a/arch/unicore32/include/asm/pci.h
+++ b/arch/unicore32/include/asm/pci.h
@@ -13,8 +13,6 @@
 #define __UNICORE_PCI_H__
 
 #ifdef __KERNEL__
-#include <asm-generic/pci-dma-compat.h>
-#include <asm-generic/pci-bridge.h>
 #include <asm-generic/pci.h>
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
@@ -23,5 +21,4 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	enum pci_mmap_state mmap_state, int write_combine);
 
 #endif /* __KERNEL__ */
-
 #endif
diff --git a/arch/unicore32/include/mach/hardware.h b/arch/unicore32/include/mach/hardware.h
index 9e20b5d9ed50..25146232c7cf 100644
--- a/arch/unicore32/include/mach/hardware.h
+++ b/arch/unicore32/include/mach/hardware.h
@@ -28,11 +28,6 @@
 #define PCIBIOS_MIN_IO			0x4000 /* should lower than 64KB */
 #define PCIBIOS_MIN_MEM			io_v2p(PKUNITY_PCIMEM_BASE)
 
-/*
- * We override the standard dma-mask routines for bouncing.
- */
-#define	HAVE_ARCH_PCI_SET_DMA_MASK
-
 #define pcibios_assign_all_busses()	1
 
 #endif  /* __MACH_PUV3_HARDWARE_H__ */
diff --git a/arch/unicore32/kernel/gpio.c b/arch/unicore32/kernel/gpio.c
index cb12ec39552c..5ab23794ea17 100644
--- a/arch/unicore32/kernel/gpio.c
+++ b/arch/unicore32/kernel/gpio.c
@@ -52,7 +52,7 @@ device_initcall(puv3_gpio_leds_init);
 
 static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return readl(GPIO_GPLR) & GPIO_GPIO(offset);
+	return !!(readl(GPIO_GPLR) & GPIO_GPIO(offset));
 }
 
 static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
index 46ebfdccbc31..aab5f341dec0 100644
--- a/arch/unicore32/kernel/puv3-nb0916.c
+++ b/arch/unicore32/kernel/puv3-nb0916.c
@@ -19,6 +19,7 @@
 #include <linux/reboot.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
@@ -49,11 +50,14 @@ static struct resource puv3_i2c_resources[] = {
 	}
 };
 
+static struct pwm_lookup nb0916_pwm_lookup[] = {
+	PWM_LOOKUP("PKUnity-v3-PWM", 0, "pwm-backlight", NULL, 70 * 1024,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct platform_pwm_backlight_data nb0916_backlight_data = {
-	.pwm_id		= 0,
 	.max_brightness	= 100,
 	.dft_brightness	= 100,
-	.pwm_period_ns	= 70 * 1024,
 	.enable_gpio	= -1,
 };
 
@@ -112,6 +116,8 @@ int __init mach_nb0916_init(void)
 	platform_device_register_simple("PKUnity-v3-I2C", -1,
 			puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources));
 
+	pwm_add_table(nb0916_pwm_lookup, ARRAY_SIZE(nb0916_pwm_lookup));
+
 	platform_device_register_data(NULL, "pwm-backlight", -1,
 			&nb0916_backlight_data, sizeof(nb0916_backlight_data));
 
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 3fa317f96122..c2bffa5614a4 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -72,13 +72,13 @@ static struct resource mem_res[] = {
 		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	},
 	{
 		.name = "Kernel data",
 		.start = 0,
 		.end = 0,
-		.flags = IORESOURCE_MEM
+		.flags = IORESOURCE_SYSTEM_RAM
 	}
 };
 
@@ -211,7 +211,7 @@ request_standard_resources(struct meminfo *mi)
 		res->name  = "System RAM";
 		res->start = mi->bank[i].start;
 		res->end   = mi->bank[i].start + mi->bank[i].size - 1;
-		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
 
 		request_resource(&iomem_resource, res);
 
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
index afccef5529cc..2ec3d3adcefc 100644
--- a/arch/unicore32/mm/fault.c
+++ b/arch/unicore32/mm/fault.c
@@ -276,7 +276,7 @@ retry:
 	up_read(&mm->mmap_sem);
 
 	/*
-	 * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR
+	 * Handle the "normal" case first - VM_FAULT_MAJOR
 	 */
 	if (likely(!(fault &
 	       (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
diff --git a/arch/unicore32/mm/pgd.c b/arch/unicore32/mm/pgd.c
index 2ade20d8eab3..c572a28c76c9 100644
--- a/arch/unicore32/mm/pgd.c
+++ b/arch/unicore32/mm/pgd.c
@@ -54,7 +54,7 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 		if (!new_pmd)
 			goto no_pmd;
 
-		new_pte = pte_alloc_map(mm, NULL, new_pmd, 0);
+		new_pte = pte_alloc_map(mm, new_pmd, 0);
 		if (!new_pte)
 			goto no_pte;
 
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index 1538562cc720..eb3abf8ac44e 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -1,6 +1,7 @@
-
 obj-y += entry/
 
+obj-$(CONFIG_PERF_EVENTS) += events/
+
 obj-$(CONFIG_KVM) += kvm/
 
 # Xen paravirtualization support
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index db3622f22b61..2dc18605831f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -24,12 +24,15 @@ config X86
 	select ARCH_DISCARD_MEMBLOCK
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FAST_MULTIPLIER
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_KCOV			if X86_64
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_MMIO_FLUSH
 	select ARCH_HAS_SG_CHAIN
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_MIGHT_HAVE_ACPI_PDC		if ACPI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
@@ -82,6 +85,8 @@ config X86
 	select HAVE_ARCH_KASAN			if X86_64 && SPARSEMEM_VMEMMAP
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_KMEMCHECK
+	select HAVE_ARCH_MMAP_RND_BITS		if MMU
+	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if MMU && COMPAT
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_SOFT_DIRTY		if X86_64
 	select HAVE_ARCH_TRACEHOOK
@@ -96,7 +101,6 @@ config X86
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
@@ -152,6 +156,9 @@ config X86
 	select VIRT_TO_BUS
 	select X86_DEV_DMA_OPS			if X86_64
 	select X86_FEATURE_NAMES		if PROC_FS
+	select HAVE_STACK_VALIDATION		if X86_64
+	select ARCH_USES_HIGH_VMA_FLAGS		if X86_INTEL_MEMORY_PROTECTION_KEYS
+	select ARCH_HAS_PKEYS			if X86_INTEL_MEMORY_PROTECTION_KEYS
 
 config INSTRUCTION_DECODER
 	def_bool y
@@ -177,12 +184,23 @@ config LOCKDEP_SUPPORT
 config STACKTRACE_SUPPORT
 	def_bool y
 
-config HAVE_LATENCYTOP_SUPPORT
-	def_bool y
-
 config MMU
 	def_bool y
 
+config ARCH_MMAP_RND_BITS_MIN
+	default 28 if 64BIT
+	default 8
+
+config ARCH_MMAP_RND_BITS_MAX
+	default 32 if 64BIT
+	default 16
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+	default 8
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+	default 16
+
 config SBUS
 	bool
 
@@ -289,6 +307,9 @@ config ARCH_SUPPORTS_UPROBES
 config FIX_EARLYCON_MEM
 	def_bool y
 
+config DEBUG_RODATA
+	def_bool y
+
 config PGTABLE_LEVELS
 	int
 	default 4 if X86_64
@@ -349,6 +370,17 @@ config X86_FEATURE_NAMES
 
 	  If in doubt, say Y.
 
+config X86_FAST_FEATURE_TESTS
+	bool "Fast CPU feature tests" if EMBEDDED
+	default y
+	---help---
+	  Some fast-paths in the kernel depend on the capabilities of the CPU.
+	  Say Y here for the kernel to patch in the appropriate code at runtime
+	  based on the capabilities of the CPU. The infrastructure for patching
+	  code at runtime takes up some additional space; space-constrained
+	  embedded systems may wish to say N here to produce smaller, slightly
+	  slower code.
+
 config X86_X2APIC
 	bool "Support x2apic"
 	depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST)
@@ -450,6 +482,7 @@ config X86_UV
 	depends on X86_64
 	depends on X86_EXTENDED_PLATFORM
 	depends on NUMA
+	depends on EFI
 	depends on X86_X2APIC
 	depends on PCI
 	---help---
@@ -484,11 +517,10 @@ config X86_INTEL_CE
 
 config X86_INTEL_MID
 	bool "Intel MID platform support"
-	depends on X86_32
 	depends on X86_EXTENDED_PLATFORM
 	depends on X86_PLATFORM_DEVICES
 	depends on PCI
-	depends on PCI_GOANY
+	depends on X86_64 || (PCI_GOANY && X86_32)
 	depends on X86_IO_APIC
 	select SFI
 	select I2C
@@ -523,9 +555,10 @@ config X86_INTEL_QUARK
 
 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
-	depends on ACPI
+	depends on X86 && ACPI
 	select COMMON_CLK
 	select PINCTRL
+	select IOSF_MBI
 	---help---
 	  Select to build support for Intel Low Power Subsystem such as
 	  found on Intel Lynxpoint PCH. Selecting this option enables
@@ -687,6 +720,14 @@ config PARAVIRT_SPINLOCKS
 
 	  If you are unsure how to answer this question, answer Y.
 
+config QUEUED_LOCK_STAT
+	bool "Paravirt queued spinlock statistics"
+	depends on PARAVIRT_SPINLOCKS && DEBUG_FS && QUEUED_SPINLOCKS
+	---help---
+	  Enable the collection of statistical data on the slowpath
+	  behavior of paravirtualized queued spinlocks and report
+	  them on debugfs.
+
 source "arch/x86/xen/Kconfig"
 
 config KVM_GUEST
@@ -744,8 +785,8 @@ config HPET_TIMER
 	  HPET is the next generation timer replacing legacy 8254s.
 	  The HPET provides a stable time base on SMP
 	  systems, unlike the TSC, but it is more expensive to access,
-	  as it is off-chip.  You can find the HPET spec at
-	  <http://www.intel.com/hardwaredesign/hpetspec_1.pdf>.
+	  as it is off-chip.  The interface used is documented
+	  in the HPET spec, revision 1.
 
 	  You can safely choose Y here.  However, HPET will only be
 	  activated if the platform and the BIOS support this feature.
@@ -1126,22 +1167,23 @@ config MICROCODE
 	bool "CPU microcode loading support"
 	default y
 	depends on CPU_SUP_AMD || CPU_SUP_INTEL
-	depends on BLK_DEV_INITRD
 	select FW_LOADER
 	---help---
-
 	  If you say Y here, you will be able to update the microcode on
-	  certain Intel and AMD processors. The Intel support is for the
-	  IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4,
-	  Xeon etc. The AMD support is for families 0x10 and later. You will
-	  obviously need the actual microcode binary data itself which is not
-	  shipped with the Linux kernel.
+	  Intel and AMD processors. The Intel support is for the IA32 family,
+	  e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, Xeon etc. The
+	  AMD support is for families 0x10 and later. You will obviously need
+	  the actual microcode binary data itself which is not shipped with
+	  the Linux kernel.
 
-	  This option selects the general module only, you need to select
-	  at least one vendor specific module as well.
+	  The preferred method to load microcode from a detached initrd is described
+	  in Documentation/x86/early-microcode.txt. For that you need to enable
+	  CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the
+	  initrd for microcode blobs.
 
-	  To compile this driver as a module, choose M here: the module
-	  will be called microcode.
+	  In addition, you can build-in the microcode into the kernel. For that you
+	  need to enable FIRMWARE_IN_KERNEL and add the vendor-supplied microcode
+	  to the CONFIG_EXTRA_FIRMWARE config option.
 
 config MICROCODE_INTEL
 	bool "Intel microcode loading support"
@@ -1168,6 +1210,15 @@ config MICROCODE_OLD_INTERFACE
 	def_bool y
 	depends on MICROCODE
 
+config PERF_EVENTS_AMD_POWER
+	depends on PERF_EVENTS && CPU_SUP_AMD
+	tristate "AMD Processor Power Reporting Mechanism"
+	---help---
+	  Provide power reporting mechanism support for AMD processors.
+	  Currently, it leverages X86_FEATURE_ACC_POWER
+	  (CPUID Fn8000_0007_EDX[12]) interface to calculate the
+	  average power consumption on Family 15h processors.
+
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
 	---help---
@@ -1680,6 +1731,20 @@ config X86_INTEL_MPX
 
 	  If unsure, say N.
 
+config X86_INTEL_MEMORY_PROTECTION_KEYS
+	prompt "Intel Memory Protection Keys"
+	def_bool y
+	# Note: only available in 64-bit mode
+	depends on CPU_SUP_INTEL && X86_64
+	---help---
+	  Memory Protection Keys provides a mechanism for enforcing
+	  page-based protections, but without requiring modification of the
+	  page tables when an application changes protection domains.
+
+	  For details, see Documentation/x86/protection-keys.txt
+
+	  If unsure, say y.
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
@@ -2397,8 +2462,6 @@ config PCI_CNB20LE_QUIRK
 
 	  You should say N unless you know you need this.
 
-source "drivers/pci/pcie/Kconfig"
-
 source "drivers/pci/Kconfig"
 
 # x86_64 have no ISA slots, but can have ISA-style DMA.
@@ -2554,8 +2617,6 @@ config AMD_NB
 
 source "drivers/pcmcia/Kconfig"
 
-source "drivers/pci/hotplug/Kconfig"
-
 config RAPIDIO
 	tristate "RapidIO support"
 	depends on PCI
@@ -2665,6 +2726,19 @@ config PMC_ATOM
 	def_bool y
         depends on PCI
 
+config VMD
+	depends on PCI_MSI
+	tristate "Volume Management Device Driver"
+	default N
+	---help---
+	  Adds support for the Intel Volume Management Device (VMD). VMD is a
+	  secondary PCI host bridge that allows PCI Express root ports,
+	  and devices attached to them, to be removed from the default
+	  PCI domain and placed within the VMD domain. This provides
+	  more bus resources than are otherwise possible with a
+	  single domain. If you know your system provides one of these and
+	  has devices attached to it, say Y; if you are not sure, say N.
+
 source "net/Kconfig"
 
 source "drivers/Kconfig"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 137dfa96aa14..67eec55093a5 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -5,23 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel. Note that with PAT support
-	  enabled, even in this case there are restrictions on /dev/mem
-	  use due to the cache aliasing requirements.
-
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to PCI space and the BIOS code and data regions.
-	  This is sufficient for dosemu and X and all common users of
-	  /dev/mem.
-
-	  If in doubt, say Y.
-
 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y
@@ -69,7 +52,7 @@ config X86_PTDUMP_CORE
 	def_bool n
 
 config X86_PTDUMP
-	bool "Export kernel pagetable layout to userspace via debugfs"
+	tristate "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	select DEBUG_FS
 	select X86_PTDUMP_CORE
@@ -91,28 +74,16 @@ config EFI_PGT_DUMP
 	  issues with the mapping of the EFI runtime regions into that
 	  table.
 
-config DEBUG_RODATA
-	bool "Write protect kernel read-only data structures"
-	default y
-	depends on DEBUG_KERNEL
-	---help---
-	  Mark the kernel read-only data as write-protected in the pagetables,
-	  in order to catch accidental (and incorrect) writes to such const
-	  data. This is recommended so that we can catch kernel bugs sooner.
-	  If in doubt, say "Y".
-
 config DEBUG_RODATA_TEST
-	bool "Testcase for the DEBUG_RODATA feature"
-	depends on DEBUG_RODATA
+	bool "Testcase for the marking rodata read-only"
 	default y
 	---help---
-	  This option enables a testcase for the DEBUG_RODATA
-	  feature as well as for the change_page_attr() infrastructure.
+	  This option enables a testcase for the setting rodata read-only
+	  as well as for the change_page_attr() infrastructure.
 	  If in doubt, say "N"
 
 config DEBUG_WX
 	bool "Warn on W+X mappings at boot"
-	depends on DEBUG_RODATA
 	select X86_PTDUMP_CORE
 	---help---
 	  Generate a warning if any W+X mappings are found at boot.
@@ -367,16 +338,6 @@ config DEBUG_IMR_SELFTEST
 
 	  If unsure say N here.
 
-config X86_DEBUG_STATIC_CPU_HAS
-	bool "Debug alternatives"
-	depends on DEBUG_KERNEL
-	---help---
-	  This option causes additional code to be generated which
-	  fails if static_cpu_has() is used before alternatives have
-	  run.
-
-	  If unsure, say N.
-
 config X86_DEBUG_FPU
 	bool "Debug the x86 FPU code"
 	depends on DEBUG_KERNEL
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 2ee62dba0373..b1ef9e489084 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -9,7 +9,15 @@
 # Changed by many, many contributors over the years.
 #
 
-KASAN_SANITIZE := n
+KASAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+
+# Kernel does not boot with kcov instrumentation here.
+# One of the problems observed was insertion of __sanitizer_cov_trace_pc()
+# callback into middle of per-cpu data enabling code. Thus the callback observed
+# inconsistent state and crashed. We are interested mostly in syscall coverage,
+# so boot code is not interesting anyway.
+KCOV_INSTRUMENT		:= n
 
 # If you want to preset the SVGA mode, uncomment the next line and
 # set SVGA_MODE to whatever number you want.
@@ -60,6 +68,7 @@ clean-files += cpustr.h
 KBUILD_CFLAGS	:= $(USERINCLUDE) $(REALMODE_CFLAGS) -D_SETUP
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
 
 $(obj)/bzImage: asflags-y  := $(SVGA_MODE)
 
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index 0033e96c3f09..9011a88353de 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -23,7 +23,6 @@
 #include <stdarg.h>
 #include <linux/types.h>
 #include <linux/edd.h>
-#include <asm/boot.h>
 #include <asm/setup.h>
 #include "bitops.h"
 #include "ctype.h"
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 0a291cdfaf77..8774cb23064f 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -16,13 +16,17 @@
 #	(see scripts/Makefile.lib size_append)
 #	compressed vmlinux.bin.all + u32 size of vmlinux.bin.all
 
-KASAN_SANITIZE := n
+KASAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT		:= n
 
 targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
 	vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4
 
 KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
-KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
+KBUILD_CFLAGS += -fno-strict-aliasing $(call cc-option, -fPIE, -fPIC)
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 cflags-$(CONFIG_X86_32) := -march=i386
 cflags-$(CONFIG_X86_64) := -mcmodel=small
@@ -33,8 +37,21 @@ KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
 
 KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
 GCOV_PROFILE := n
+UBSAN_SANITIZE :=n
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
+ifeq ($(CONFIG_RELOCATABLE),y)
+# If kernel is relocatable, build compressed kernel as PIE.
+ifeq ($(CONFIG_X86_32),y)
+LDFLAGS += $(call ld-option, -pie) $(call ld-option, --no-dynamic-linker)
+else
+# To build 64-bit compressed kernel as PIE, we disable relocation
+# overflow check to avoid relocation overflow error with a new linker
+# command-line option, -z noreloc-overflow.
+LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \
+	&& echo "-z noreloc-overflow -pie --no-dynamic-linker")
+endif
+endif
 LDFLAGS_vmlinux := -T
 
 hostprogs-y	:= mkpiggy
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 8ef964ddc18e..0256064da8da 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -31,6 +31,34 @@
 #include <asm/asm-offsets.h>
 #include <asm/bootparam.h>
 
+/*
+ * The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X
+ * relocation to get the symbol address in PIC.  When the compressed x86
+ * kernel isn't built as PIC, the linker optimizes R_386_GOT32X
+ * relocations to their fixed symbol addresses.  However, when the
+ * compressed x86 kernel is loaded at a different address, it leads
+ * to the following load failure:
+ *
+ *   Failed to allocate space for phdrs
+ *
+ * during the decompression stage.
+ *
+ * If the compressed x86 kernel is relocatable at run-time, it should be
+ * compiled with -fPIE, instead of -fPIC, if possible and should be built as
+ * Position Independent Executable (PIE) so that linker won't optimize
+ * R_386_GOT32X relocation to its fixed symbol address.  Older
+ * linkers generate R_386_32 relocations against locally defined symbols,
+ * _bss, _ebss, _got and _egot, in PIE.  It isn't wrong, just less
+ * optimal than R_386_RELATIVE.  But the x86 kernel fails to properly handle
+ * R_386_32 relocations when relocating the kernel.  To generate
+ * R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
+ * hidden:
+ */
+	.hidden _bss
+	.hidden _ebss
+	.hidden _got
+	.hidden _egot
+
 	__HEAD
 ENTRY(startup_32)
 #ifdef CONFIG_EFI_STUB
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index b0c0d16ef58d..86558a199139 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -33,6 +33,14 @@
 #include <asm/asm-offsets.h>
 #include <asm/bootparam.h>
 
+/*
+ * Locally defined symbols should be marked hidden:
+ */
+	.hidden _bss
+	.hidden _ebss
+	.hidden _got
+	.hidden _egot
+
 	__HEAD
 	.code32
 ENTRY(startup_32)
diff --git a/arch/x86/boot/cpuflags.h b/arch/x86/boot/cpuflags.h
index ea97697e51e4..4cb404fd45ce 100644
--- a/arch/x86/boot/cpuflags.h
+++ b/arch/x86/boot/cpuflags.h
@@ -1,7 +1,7 @@
 #ifndef BOOT_CPUFLAGS_H
 #define BOOT_CPUFLAGS_H
 
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/processor-flags.h>
 
 struct cpu_features {
diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c
index 637097e66a62..f72498dc90d2 100644
--- a/arch/x86/boot/mkcpustr.c
+++ b/arch/x86/boot/mkcpustr.c
@@ -17,7 +17,7 @@
 
 #include "../include/asm/required-features.h"
 #include "../include/asm/disabled-features.h"
-#include "../include/asm/cpufeature.h"
+#include "../include/asm/cpufeatures.h"
 #include "../kernel/cpu/capflags.c"
 
 int main(void)
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index a7661c430cd9..0702d2531bc7 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -49,7 +49,6 @@ typedef unsigned int   u32;
 
 /* This must be large enough to hold the entire setup */
 u8 buf[SETUP_SECT_MAX*512];
-int is_big_kernel;
 
 #define PECOFF_RELOC_RESERVE 0x20
 
diff --git a/arch/x86/boot/video-mode.c b/arch/x86/boot/video-mode.c
index aa8a96b052e3..95c7a818c0ed 100644
--- a/arch/x86/boot/video-mode.c
+++ b/arch/x86/boot/video-mode.c
@@ -19,6 +19,8 @@
 #include "video.h"
 #include "vesa.h"
 
+#include <uapi/asm/boot.h>
+
 /*
  * Common variables
  */
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index 05111bb8d018..77780e386e9b 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -13,6 +13,8 @@
  * Select video mode
  */
 
+#include <uapi/asm/boot.h>
+
 #include "boot.h"
 #include "video.h"
 #include "vesa.h"
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 028be48c8839..265901a84f3f 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -288,7 +288,7 @@ CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_FRAME_WARN=2048
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
@@ -303,7 +303,6 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_BOOT_PARAMS=y
 CONFIG_OPTIMIZE_INLINING=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_SELINUX=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index cb5b3ab5beec..4f404a64681b 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -300,7 +300,6 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_BOOT_PARAMS=y
 CONFIG_OPTIMIZE_INLINING=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_SELINUX=y
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 6bd2c6c95373..383a6f84a060 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -31,6 +31,7 @@
 
 #include <linux/linkage.h>
 #include <asm/inst.h>
+#include <asm/frame.h>
 
 /*
  * The following macros are used to move an (un)aligned 16 byte value to/from
@@ -1800,11 +1801,12 @@ ENDPROC(_key_expansion_256b)
  *                   unsigned int key_len)
  */
 ENTRY(aesni_set_key)
+	FRAME_BEGIN
 #ifndef __x86_64__
 	pushl KEYP
-	movl 8(%esp), KEYP		# ctx
-	movl 12(%esp), UKEYP		# in_key
-	movl 16(%esp), %edx		# key_len
+	movl (FRAME_OFFSET+8)(%esp), KEYP	# ctx
+	movl (FRAME_OFFSET+12)(%esp), UKEYP	# in_key
+	movl (FRAME_OFFSET+16)(%esp), %edx	# key_len
 #endif
 	movups (UKEYP), %xmm0		# user key (first 16 bytes)
 	movaps %xmm0, (KEYP)
@@ -1905,6 +1907,7 @@ ENTRY(aesni_set_key)
 #ifndef __x86_64__
 	popl KEYP
 #endif
+	FRAME_END
 	ret
 ENDPROC(aesni_set_key)
 
@@ -1912,12 +1915,13 @@ ENDPROC(aesni_set_key)
  * void aesni_enc(struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src)
  */
 ENTRY(aesni_enc)
+	FRAME_BEGIN
 #ifndef __x86_64__
 	pushl KEYP
 	pushl KLEN
-	movl 12(%esp), KEYP
-	movl 16(%esp), OUTP
-	movl 20(%esp), INP
+	movl (FRAME_OFFSET+12)(%esp), KEYP	# ctx
+	movl (FRAME_OFFSET+16)(%esp), OUTP	# dst
+	movl (FRAME_OFFSET+20)(%esp), INP	# src
 #endif
 	movl 480(KEYP), KLEN		# key length
 	movups (INP), STATE		# input
@@ -1927,6 +1931,7 @@ ENTRY(aesni_enc)
 	popl KLEN
 	popl KEYP
 #endif
+	FRAME_END
 	ret
 ENDPROC(aesni_enc)
 
@@ -2101,12 +2106,13 @@ ENDPROC(_aesni_enc4)
  * void aesni_dec (struct crypto_aes_ctx *ctx, u8 *dst, const u8 *src)
  */
 ENTRY(aesni_dec)
+	FRAME_BEGIN
 #ifndef __x86_64__
 	pushl KEYP
 	pushl KLEN
-	movl 12(%esp), KEYP
-	movl 16(%esp), OUTP
-	movl 20(%esp), INP
+	movl (FRAME_OFFSET+12)(%esp), KEYP	# ctx
+	movl (FRAME_OFFSET+16)(%esp), OUTP	# dst
+	movl (FRAME_OFFSET+20)(%esp), INP	# src
 #endif
 	mov 480(KEYP), KLEN		# key length
 	add $240, KEYP
@@ -2117,6 +2123,7 @@ ENTRY(aesni_dec)
 	popl KLEN
 	popl KEYP
 #endif
+	FRAME_END
 	ret
 ENDPROC(aesni_dec)
 
@@ -2292,14 +2299,15 @@ ENDPROC(_aesni_dec4)
  *		      size_t len)
  */
 ENTRY(aesni_ecb_enc)
+	FRAME_BEGIN
 #ifndef __x86_64__
 	pushl LEN
 	pushl KEYP
 	pushl KLEN
-	movl 16(%esp), KEYP
-	movl 20(%esp), OUTP
-	movl 24(%esp), INP
-	movl 28(%esp), LEN
+	movl (FRAME_OFFSET+16)(%esp), KEYP	# ctx
+	movl (FRAME_OFFSET+20)(%esp), OUTP	# dst
+	movl (FRAME_OFFSET+24)(%esp), INP	# src
+	movl (FRAME_OFFSET+28)(%esp), LEN	# len
 #endif
 	test LEN, LEN		# check length
 	jz .Lecb_enc_ret
@@ -2342,6 +2350,7 @@ ENTRY(aesni_ecb_enc)
 	popl KEYP
 	popl LEN
 #endif
+	FRAME_END
 	ret
 ENDPROC(aesni_ecb_enc)
 
@@ -2350,14 +2359,15 @@ ENDPROC(aesni_ecb_enc)
  *		      size_t len);
  */
 ENTRY(aesni_ecb_dec)
+	FRAME_BEGIN
 #ifndef __x86_64__
 	pushl LEN
 	pushl KEYP
 	pushl KLEN
-	movl 16(%esp), KEYP
-	movl 20(%esp), OUTP
-	movl 24(%esp), INP
-	movl 28(%esp), LEN
+	movl (FRAME_OFFSET+16)(%esp), KEYP	# ctx
+	movl (FRAME_OFFSET+20)(%esp), OUTP	# dst
+	movl (FRAME_OFFSET+24)(%esp), INP	# src
+	movl (FRAME_OFFSET+28)(%esp), LEN	# len
 #endif
 	test LEN, LEN
 	jz .Lecb_dec_ret
@@ -2401,6 +2411,7 @@ ENTRY(aesni_ecb_dec)
 	popl KEYP
 	popl LEN
 #endif
+	FRAME_END
 	ret
 ENDPROC(aesni_ecb_dec)
 
@@ -2409,16 +2420,17 @@ ENDPROC(aesni_ecb_dec)
  *		      size_t len, u8 *iv)
  */
 ENTRY(aesni_cbc_enc)
+	FRAME_BEGIN
 #ifndef __x86_64__
 	pushl IVP
 	pushl LEN
 	pushl KEYP
 	pushl KLEN
-	movl 20(%esp), KEYP
-	movl 24(%esp), OUTP
-	movl 28(%esp), INP
-	movl 32(%esp), LEN
-	movl 36(%esp), IVP
+	movl (FRAME_OFFSET+20)(%esp), KEYP	# ctx
+	movl (FRAME_OFFSET+24)(%esp), OUTP	# dst
+	movl (FRAME_OFFSET+28)(%esp), INP	# src
+	movl (FRAME_OFFSET+32)(%esp), LEN	# len
+	movl (FRAME_OFFSET+36)(%esp), IVP	# iv
 #endif
 	cmp $16, LEN
 	jb .Lcbc_enc_ret
@@ -2443,6 +2455,7 @@ ENTRY(aesni_cbc_enc)
 	popl LEN
 	popl IVP
 #endif
+	FRAME_END
 	ret
 ENDPROC(aesni_cbc_enc)
 
@@ -2451,16 +2464,17 @@ ENDPROC(aesni_cbc_enc)
  *		      size_t len, u8 *iv)
  */
 ENTRY(aesni_cbc_dec)
+	FRAME_BEGIN
 #ifndef __x86_64__
 	pushl IVP
 	pushl LEN
 	pushl KEYP
 	pushl KLEN
-	movl 20(%esp), KEYP
-	movl 24(%esp), OUTP
-	movl 28(%esp), INP
-	movl 32(%esp), LEN
-	movl 36(%esp), IVP
+	movl (FRAME_OFFSET+20)(%esp), KEYP	# ctx
+	movl (FRAME_OFFSET+24)(%esp), OUTP	# dst
+	movl (FRAME_OFFSET+28)(%esp), INP	# src
+	movl (FRAME_OFFSET+32)(%esp), LEN	# len
+	movl (FRAME_OFFSET+36)(%esp), IVP	# iv
 #endif
 	cmp $16, LEN
 	jb .Lcbc_dec_just_ret
@@ -2534,13 +2548,16 @@ ENTRY(aesni_cbc_dec)
 	popl LEN
 	popl IVP
 #endif
+	FRAME_END
 	ret
 ENDPROC(aesni_cbc_dec)
 
 #ifdef __x86_64__
+.pushsection .rodata
 .align 16
 .Lbswap_mask:
 	.byte 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0
+.popsection
 
 /*
  * _aesni_inc_init:	internal ABI
@@ -2598,6 +2615,7 @@ ENDPROC(_aesni_inc)
  *		      size_t len, u8 *iv)
  */
 ENTRY(aesni_ctr_enc)
+	FRAME_BEGIN
 	cmp $16, LEN
 	jb .Lctr_enc_just_ret
 	mov 480(KEYP), KLEN
@@ -2651,6 +2669,7 @@ ENTRY(aesni_ctr_enc)
 .Lctr_enc_ret:
 	movups IV, (IVP)
 .Lctr_enc_just_ret:
+	FRAME_END
 	ret
 ENDPROC(aesni_ctr_enc)
 
@@ -2677,6 +2696,7 @@ ENDPROC(aesni_ctr_enc)
  *			 bool enc, u8 *iv)
  */
 ENTRY(aesni_xts_crypt8)
+	FRAME_BEGIN
 	cmpb $0, %cl
 	movl $0, %ecx
 	movl $240, %r10d
@@ -2777,6 +2797,7 @@ ENTRY(aesni_xts_crypt8)
 	pxor INC, STATE4
 	movdqu STATE4, 0x70(OUTP)
 
+	FRAME_END
 	ret
 ENDPROC(aesni_xts_crypt8)
 
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 3633ad6145c5..064c7e2bd7c8 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -639,16 +639,11 @@ static int xts_aesni_setkey(struct crypto_tfm *tfm, const u8 *key,
 			    unsigned int keylen)
 {
 	struct aesni_xts_ctx *ctx = crypto_tfm_ctx(tfm);
-	u32 *flags = &tfm->crt_flags;
 	int err;
 
-	/* key consists of keys of equal size concatenated, therefore
-	 * the length must be even
-	 */
-	if (keylen % 2) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	err = xts_check_key(tfm, key, keylen);
+	if (err)
+		return err;
 
 	/* first half of xts-key is for crypt */
 	err = aes_set_key_common(tfm, ctx->raw_crypt_ctx, key, keylen / 2);
diff --git a/arch/x86/crypto/camellia-aesni-avx-asm_64.S b/arch/x86/crypto/camellia-aesni-avx-asm_64.S
index ce71f9212409..aa9e8bd163f6 100644
--- a/arch/x86/crypto/camellia-aesni-avx-asm_64.S
+++ b/arch/x86/crypto/camellia-aesni-avx-asm_64.S
@@ -16,6 +16,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 
 #define CAMELLIA_TABLE_BYTE_LEN 272
 
@@ -726,6 +727,7 @@ __camellia_enc_blk16:
 	 *	%xmm0..%xmm15: 16 encrypted blocks, order swapped:
 	 *       7, 8, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8
 	 */
+	FRAME_BEGIN
 
 	leaq 8 * 16(%rax), %rcx;
 
@@ -780,6 +782,7 @@ __camellia_enc_blk16:
 		    %xmm8, %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14,
 		    %xmm15, (key_table)(CTX, %r8, 8), (%rax), 1 * 16(%rax));
 
+	FRAME_END
 	ret;
 
 .align 8
@@ -812,6 +815,7 @@ __camellia_dec_blk16:
 	 *	%xmm0..%xmm15: 16 plaintext blocks, order swapped:
 	 *       7, 8, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8
 	 */
+	FRAME_BEGIN
 
 	leaq 8 * 16(%rax), %rcx;
 
@@ -865,6 +869,7 @@ __camellia_dec_blk16:
 		    %xmm8, %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14,
 		    %xmm15, (key_table)(CTX), (%rax), 1 * 16(%rax));
 
+	FRAME_END
 	ret;
 
 .align 8
@@ -890,6 +895,7 @@ ENTRY(camellia_ecb_enc_16way)
 	 *	%rsi: dst (16 blocks)
 	 *	%rdx: src (16 blocks)
 	 */
+	 FRAME_BEGIN
 
 	inpack16_pre(%xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
 		     %xmm8, %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14,
@@ -904,6 +910,7 @@ ENTRY(camellia_ecb_enc_16way)
 		     %xmm15, %xmm14, %xmm13, %xmm12, %xmm11, %xmm10, %xmm9,
 		     %xmm8, %rsi);
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_ecb_enc_16way)
 
@@ -913,6 +920,7 @@ ENTRY(camellia_ecb_dec_16way)
 	 *	%rsi: dst (16 blocks)
 	 *	%rdx: src (16 blocks)
 	 */
+	 FRAME_BEGIN
 
 	cmpl $16, key_length(CTX);
 	movl $32, %r8d;
@@ -932,6 +940,7 @@ ENTRY(camellia_ecb_dec_16way)
 		     %xmm15, %xmm14, %xmm13, %xmm12, %xmm11, %xmm10, %xmm9,
 		     %xmm8, %rsi);
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_ecb_dec_16way)
 
@@ -941,6 +950,7 @@ ENTRY(camellia_cbc_dec_16way)
 	 *	%rsi: dst (16 blocks)
 	 *	%rdx: src (16 blocks)
 	 */
+	FRAME_BEGIN
 
 	cmpl $16, key_length(CTX);
 	movl $32, %r8d;
@@ -981,6 +991,7 @@ ENTRY(camellia_cbc_dec_16way)
 		     %xmm15, %xmm14, %xmm13, %xmm12, %xmm11, %xmm10, %xmm9,
 		     %xmm8, %rsi);
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_cbc_dec_16way)
 
@@ -997,6 +1008,7 @@ ENTRY(camellia_ctr_16way)
 	 *	%rdx: src (16 blocks)
 	 *	%rcx: iv (little endian, 128bit)
 	 */
+	FRAME_BEGIN
 
 	subq $(16 * 16), %rsp;
 	movq %rsp, %rax;
@@ -1092,6 +1104,7 @@ ENTRY(camellia_ctr_16way)
 		     %xmm15, %xmm14, %xmm13, %xmm12, %xmm11, %xmm10, %xmm9,
 		     %xmm8, %rsi);
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_ctr_16way)
 
@@ -1112,6 +1125,7 @@ camellia_xts_crypt_16way:
 	 *	%r8: index for input whitening key
 	 *	%r9: pointer to  __camellia_enc_blk16 or __camellia_dec_blk16
 	 */
+	FRAME_BEGIN
 
 	subq $(16 * 16), %rsp;
 	movq %rsp, %rax;
@@ -1234,6 +1248,7 @@ camellia_xts_crypt_16way:
 		     %xmm15, %xmm14, %xmm13, %xmm12, %xmm11, %xmm10, %xmm9,
 		     %xmm8, %rsi);
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_xts_crypt_16way)
 
diff --git a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
index 0e0b8863a34b..16186c18656d 100644
--- a/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
+++ b/arch/x86/crypto/camellia-aesni-avx2-asm_64.S
@@ -11,6 +11,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 
 #define CAMELLIA_TABLE_BYTE_LEN 272
 
@@ -766,6 +767,7 @@ __camellia_enc_blk32:
 	 *	%ymm0..%ymm15: 32 encrypted blocks, order swapped:
 	 *       7, 8, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8
 	 */
+	FRAME_BEGIN
 
 	leaq 8 * 32(%rax), %rcx;
 
@@ -820,6 +822,7 @@ __camellia_enc_blk32:
 		    %ymm8, %ymm9, %ymm10, %ymm11, %ymm12, %ymm13, %ymm14,
 		    %ymm15, (key_table)(CTX, %r8, 8), (%rax), 1 * 32(%rax));
 
+	FRAME_END
 	ret;
 
 .align 8
@@ -852,6 +855,7 @@ __camellia_dec_blk32:
 	 *	%ymm0..%ymm15: 16 plaintext blocks, order swapped:
 	 *       7, 8, 6, 5, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 10, 9, 8
 	 */
+	FRAME_BEGIN
 
 	leaq 8 * 32(%rax), %rcx;
 
@@ -905,6 +909,7 @@ __camellia_dec_blk32:
 		    %ymm8, %ymm9, %ymm10, %ymm11, %ymm12, %ymm13, %ymm14,
 		    %ymm15, (key_table)(CTX), (%rax), 1 * 32(%rax));
 
+	FRAME_END
 	ret;
 
 .align 8
@@ -930,6 +935,7 @@ ENTRY(camellia_ecb_enc_32way)
 	 *	%rsi: dst (32 blocks)
 	 *	%rdx: src (32 blocks)
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -948,6 +954,7 @@ ENTRY(camellia_ecb_enc_32way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_ecb_enc_32way)
 
@@ -957,6 +964,7 @@ ENTRY(camellia_ecb_dec_32way)
 	 *	%rsi: dst (32 blocks)
 	 *	%rdx: src (32 blocks)
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -980,6 +988,7 @@ ENTRY(camellia_ecb_dec_32way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_ecb_dec_32way)
 
@@ -989,6 +998,7 @@ ENTRY(camellia_cbc_dec_32way)
 	 *	%rsi: dst (32 blocks)
 	 *	%rdx: src (32 blocks)
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -1046,6 +1056,7 @@ ENTRY(camellia_cbc_dec_32way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_cbc_dec_32way)
 
@@ -1070,6 +1081,7 @@ ENTRY(camellia_ctr_32way)
 	 *	%rdx: src (32 blocks)
 	 *	%rcx: iv (little endian, 128bit)
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -1184,6 +1196,7 @@ ENTRY(camellia_ctr_32way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_ctr_32way)
 
@@ -1216,6 +1229,7 @@ camellia_xts_crypt_32way:
 	 *	%r8: index for input whitening key
 	 *	%r9: pointer to  __camellia_enc_blk32 or __camellia_dec_blk32
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -1349,6 +1363,7 @@ camellia_xts_crypt_32way:
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(camellia_xts_crypt_32way)
 
diff --git a/arch/x86/crypto/camellia_glue.c b/arch/x86/crypto/camellia_glue.c
index 5c8b6266a394..aa76cad9d262 100644
--- a/arch/x86/crypto/camellia_glue.c
+++ b/arch/x86/crypto/camellia_glue.c
@@ -1503,13 +1503,9 @@ int xts_camellia_setkey(struct crypto_tfm *tfm, const u8 *key,
 	u32 *flags = &tfm->crt_flags;
 	int err;
 
-	/* key consists of keys of equal size concatenated, therefore
-	 * the length must be even
-	 */
-	if (keylen % 2) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	err = xts_check_key(tfm, key, keylen);
+	if (err)
+		return err;
 
 	/* first half of xts-key is for crypt */
 	err = __camellia_setkey(&ctx->crypt_ctx, key, keylen / 2, flags);
diff --git a/arch/x86/crypto/cast5-avx-x86_64-asm_64.S b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
index c35fd5d6ecd2..14fa1966bf01 100644
--- a/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
+++ b/arch/x86/crypto/cast5-avx-x86_64-asm_64.S
@@ -24,6 +24,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 
 .file "cast5-avx-x86_64-asm_64.S"
 
@@ -365,6 +366,7 @@ ENTRY(cast5_ecb_enc_16way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -388,6 +390,7 @@ ENTRY(cast5_ecb_enc_16way)
 	vmovdqu RR4, (6*4*4)(%r11);
 	vmovdqu RL4, (7*4*4)(%r11);
 
+	FRAME_END
 	ret;
 ENDPROC(cast5_ecb_enc_16way)
 
@@ -398,6 +401,7 @@ ENTRY(cast5_ecb_dec_16way)
 	 *	%rdx: src
 	 */
 
+	FRAME_BEGIN
 	movq %rsi, %r11;
 
 	vmovdqu (0*4*4)(%rdx), RL1;
@@ -420,6 +424,7 @@ ENTRY(cast5_ecb_dec_16way)
 	vmovdqu RR4, (6*4*4)(%r11);
 	vmovdqu RL4, (7*4*4)(%r11);
 
+	FRAME_END
 	ret;
 ENDPROC(cast5_ecb_dec_16way)
 
@@ -429,6 +434,7 @@ ENTRY(cast5_cbc_dec_16way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	pushq %r12;
 
@@ -469,6 +475,7 @@ ENTRY(cast5_cbc_dec_16way)
 
 	popq %r12;
 
+	FRAME_END
 	ret;
 ENDPROC(cast5_cbc_dec_16way)
 
@@ -479,6 +486,7 @@ ENTRY(cast5_ctr_16way)
 	 *	%rdx: src
 	 *	%rcx: iv (big endian, 64bit)
 	 */
+	FRAME_BEGIN
 
 	pushq %r12;
 
@@ -542,5 +550,6 @@ ENTRY(cast5_ctr_16way)
 
 	popq %r12;
 
+	FRAME_END
 	ret;
 ENDPROC(cast5_ctr_16way)
diff --git a/arch/x86/crypto/cast6-avx-x86_64-asm_64.S b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
index e3531f833951..c419389889cd 100644
--- a/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
+++ b/arch/x86/crypto/cast6-avx-x86_64-asm_64.S
@@ -24,6 +24,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 #include "glue_helper-asm-avx.S"
 
 .file "cast6-avx-x86_64-asm_64.S"
@@ -349,6 +350,7 @@ ENTRY(cast6_ecb_enc_8way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -358,6 +360,7 @@ ENTRY(cast6_ecb_enc_8way)
 
 	store_8way(%r11, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(cast6_ecb_enc_8way)
 
@@ -367,6 +370,7 @@ ENTRY(cast6_ecb_dec_8way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -376,6 +380,7 @@ ENTRY(cast6_ecb_dec_8way)
 
 	store_8way(%r11, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(cast6_ecb_dec_8way)
 
@@ -385,6 +390,7 @@ ENTRY(cast6_cbc_dec_8way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	pushq %r12;
 
@@ -399,6 +405,7 @@ ENTRY(cast6_cbc_dec_8way)
 
 	popq %r12;
 
+	FRAME_END
 	ret;
 ENDPROC(cast6_cbc_dec_8way)
 
@@ -409,6 +416,7 @@ ENTRY(cast6_ctr_8way)
 	 *	%rdx: src
 	 *	%rcx: iv (little endian, 128bit)
 	 */
+	FRAME_BEGIN
 
 	pushq %r12;
 
@@ -424,6 +432,7 @@ ENTRY(cast6_ctr_8way)
 
 	popq %r12;
 
+	FRAME_END
 	ret;
 ENDPROC(cast6_ctr_8way)
 
@@ -434,6 +443,7 @@ ENTRY(cast6_xts_enc_8way)
 	 *	%rdx: src
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -446,6 +456,7 @@ ENTRY(cast6_xts_enc_8way)
 	/* dst <= regs xor IVs(in dst) */
 	store_xts_8way(%r11, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(cast6_xts_enc_8way)
 
@@ -456,6 +467,7 @@ ENTRY(cast6_xts_dec_8way)
 	 *	%rdx: src
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -468,5 +480,6 @@ ENTRY(cast6_xts_dec_8way)
 	/* dst <= regs xor IVs(in dst) */
 	store_xts_8way(%r11, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(cast6_xts_dec_8way)
diff --git a/arch/x86/crypto/cast6_avx_glue.c b/arch/x86/crypto/cast6_avx_glue.c
index fca459578c35..50e684768c55 100644
--- a/arch/x86/crypto/cast6_avx_glue.c
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -329,13 +329,9 @@ static int xts_cast6_setkey(struct crypto_tfm *tfm, const u8 *key,
 	u32 *flags = &tfm->crt_flags;
 	int err;
 
-	/* key consists of keys of equal size concatenated, therefore
-	 * the length must be even
-	 */
-	if (keylen % 2) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	err = xts_check_key(tfm, key, keylen);
+	if (err)
+		return err;
 
 	/* first half of xts-key is for crypt */
 	err = __cast6_setkey(&ctx->crypt_ctx, key, keylen / 2, flags);
diff --git a/arch/x86/crypto/chacha20-ssse3-x86_64.S b/arch/x86/crypto/chacha20-ssse3-x86_64.S
index 712b13047b41..3a33124e9112 100644
--- a/arch/x86/crypto/chacha20-ssse3-x86_64.S
+++ b/arch/x86/crypto/chacha20-ssse3-x86_64.S
@@ -157,7 +157,9 @@ ENTRY(chacha20_4block_xor_ssse3)
 	# done with the slightly better performing SSSE3 byte shuffling,
 	# 7/12-bit word rotation uses traditional shift+OR.
 
-	sub		$0x40,%rsp
+	mov		%rsp,%r11
+	sub		$0x80,%rsp
+	and		$~63,%rsp
 
 	# x0..15[0-3] = s0..3[0..3]
 	movq		0x00(%rdi),%xmm1
@@ -620,6 +622,6 @@ ENTRY(chacha20_4block_xor_ssse3)
 	pxor		%xmm1,%xmm15
 	movdqu		%xmm15,0xf0(%rsi)
 
-	add		$0x40,%rsp
+	mov		%r11,%rsp
 	ret
 ENDPROC(chacha20_4block_xor_ssse3)
diff --git a/arch/x86/crypto/chacha20_glue.c b/arch/x86/crypto/chacha20_glue.c
index 722bacea040e..8baaff5af0b5 100644
--- a/arch/x86/crypto/chacha20_glue.c
+++ b/arch/x86/crypto/chacha20_glue.c
@@ -125,7 +125,7 @@ static struct crypto_alg alg = {
 
 static int __init chacha20_simd_mod_init(void)
 {
-	if (!cpu_has_ssse3)
+	if (!boot_cpu_has(X86_FEATURE_SSSE3))
 		return -ENODEV;
 
 #ifdef CONFIG_AS_AVX2
diff --git a/arch/x86/crypto/crc32-pclmul_glue.c b/arch/x86/crypto/crc32-pclmul_glue.c
index 07d2c6c86a54..27226df3f7d8 100644
--- a/arch/x86/crypto/crc32-pclmul_glue.c
+++ b/arch/x86/crypto/crc32-pclmul_glue.c
@@ -33,7 +33,7 @@
 #include <linux/crc32.h>
 #include <crypto/internal/hash.h>
 
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/cpu_device_id.h>
 #include <asm/fpu/api.h>
 
diff --git a/arch/x86/crypto/crc32c-intel_glue.c b/arch/x86/crypto/crc32c-intel_glue.c
index 81a595d75cf5..0857b1a1de3b 100644
--- a/arch/x86/crypto/crc32c-intel_glue.c
+++ b/arch/x86/crypto/crc32c-intel_glue.c
@@ -30,7 +30,7 @@
 #include <linux/kernel.h>
 #include <crypto/internal/hash.h>
 
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/cpu_device_id.h>
 #include <asm/fpu/internal.h>
 
@@ -257,7 +257,7 @@ static int __init crc32c_intel_mod_init(void)
 	if (!x86_match_cpu(crc32c_cpu_id))
 		return -ENODEV;
 #ifdef CONFIG_X86_64
-	if (cpu_has_pclmulqdq) {
+	if (boot_cpu_has(X86_FEATURE_PCLMULQDQ)) {
 		alg.update = crc32c_pcl_intel_update;
 		alg.finup = crc32c_pcl_intel_finup;
 		alg.digest = crc32c_pcl_intel_digest;
diff --git a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
index 4fe27e074194..dc05f010ca9b 100644
--- a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
+++ b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
@@ -170,8 +170,8 @@ continue_block:
 	## branch into array
 	lea	jump_table(%rip), bufp
 	movzxw  (bufp, %rax, 2), len
-	offset=crc_array-jump_table
-	lea     offset(bufp, len, 1), bufp
+	lea	crc_array(%rip), bufp
+	lea     (bufp, len, 1), bufp
 	jmp     *bufp
 
 	################################################################
@@ -310,7 +310,9 @@ do_return:
 	popq    %rdi
 	popq    %rbx
         ret
+ENDPROC(crc_pcl)
 
+.section	.rodata, "a", %progbits
         ################################################################
         ## jump table        Table is 129 entries x 2 bytes each
         ################################################################
@@ -324,13 +326,11 @@ JMPTBL_ENTRY %i
 	i=i+1
 .endr
 
-ENDPROC(crc_pcl)
 
 	################################################################
 	## PCLMULQDQ tables
 	## Table is 128 entries x 2 words (8 bytes) each
 	################################################################
-.section	.rodata, "a", %progbits
 .align 8
 K_table:
 	.long 0x493c7d27, 0x00000001
diff --git a/arch/x86/crypto/crct10dif-pclmul_glue.c b/arch/x86/crypto/crct10dif-pclmul_glue.c
index a3fcfc97a311..cd4df9322501 100644
--- a/arch/x86/crypto/crct10dif-pclmul_glue.c
+++ b/arch/x86/crypto/crct10dif-pclmul_glue.c
@@ -30,7 +30,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <asm/fpu/api.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/cpu_device_id.h>
 
 asmlinkage __u16 crc_t10dif_pcl(__u16 crc, const unsigned char *buf,
diff --git a/arch/x86/crypto/ghash-clmulni-intel_asm.S b/arch/x86/crypto/ghash-clmulni-intel_asm.S
index 5d1e0075ac24..eed55c8cca4f 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_asm.S
+++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S
@@ -18,6 +18,7 @@
 
 #include <linux/linkage.h>
 #include <asm/inst.h>
+#include <asm/frame.h>
 
 .data
 
@@ -94,6 +95,7 @@ ENDPROC(__clmul_gf128mul_ble)
 
 /* void clmul_ghash_mul(char *dst, const u128 *shash) */
 ENTRY(clmul_ghash_mul)
+	FRAME_BEGIN
 	movups (%rdi), DATA
 	movups (%rsi), SHASH
 	movaps .Lbswap_mask, BSWAP
@@ -101,6 +103,7 @@ ENTRY(clmul_ghash_mul)
 	call __clmul_gf128mul_ble
 	PSHUFB_XMM BSWAP DATA
 	movups DATA, (%rdi)
+	FRAME_END
 	ret
 ENDPROC(clmul_ghash_mul)
 
@@ -109,6 +112,7 @@ ENDPROC(clmul_ghash_mul)
  *			   const u128 *shash);
  */
 ENTRY(clmul_ghash_update)
+	FRAME_BEGIN
 	cmp $16, %rdx
 	jb .Lupdate_just_ret	# check length
 	movaps .Lbswap_mask, BSWAP
@@ -128,5 +132,6 @@ ENTRY(clmul_ghash_update)
 	PSHUFB_XMM BSWAP DATA
 	movups DATA, (%rdi)
 .Lupdate_just_ret:
+	FRAME_END
 	ret
 ENDPROC(clmul_ghash_update)
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index 440df0c7a2ee..a69321a77783 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -219,6 +219,29 @@ static int ghash_async_final(struct ahash_request *req)
 	}
 }
 
+static int ghash_async_import(struct ahash_request *req, const void *in)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+	struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+
+	ghash_async_init(req);
+	memcpy(dctx, in, sizeof(*dctx));
+	return 0;
+
+}
+
+static int ghash_async_export(struct ahash_request *req, void *out)
+{
+	struct ahash_request *cryptd_req = ahash_request_ctx(req);
+	struct shash_desc *desc = cryptd_shash_desc(cryptd_req);
+	struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+
+	memcpy(out, dctx, sizeof(*dctx));
+	return 0;
+
+}
+
 static int ghash_async_digest(struct ahash_request *req)
 {
 	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
@@ -288,8 +311,11 @@ static struct ahash_alg ghash_async_alg = {
 	.final		= ghash_async_final,
 	.setkey		= ghash_async_setkey,
 	.digest		= ghash_async_digest,
+	.export		= ghash_async_export,
+	.import		= ghash_async_import,
 	.halg = {
 		.digestsize	= GHASH_DIGEST_SIZE,
+		.statesize = sizeof(struct ghash_desc_ctx),
 		.base = {
 			.cra_name		= "ghash",
 			.cra_driver_name	= "ghash-clmulni",
diff --git a/arch/x86/crypto/serpent-avx-x86_64-asm_64.S b/arch/x86/crypto/serpent-avx-x86_64-asm_64.S
index 2f202f49872b..8be571808342 100644
--- a/arch/x86/crypto/serpent-avx-x86_64-asm_64.S
+++ b/arch/x86/crypto/serpent-avx-x86_64-asm_64.S
@@ -24,6 +24,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 #include "glue_helper-asm-avx.S"
 
 .file "serpent-avx-x86_64-asm_64.S"
@@ -681,6 +682,7 @@ ENTRY(serpent_ecb_enc_8way_avx)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	load_8way(%rdx, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
@@ -688,6 +690,7 @@ ENTRY(serpent_ecb_enc_8way_avx)
 
 	store_8way(%rsi, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_ecb_enc_8way_avx)
 
@@ -697,6 +700,7 @@ ENTRY(serpent_ecb_dec_8way_avx)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	load_8way(%rdx, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
@@ -704,6 +708,7 @@ ENTRY(serpent_ecb_dec_8way_avx)
 
 	store_8way(%rsi, RC1, RD1, RB1, RE1, RC2, RD2, RB2, RE2);
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_ecb_dec_8way_avx)
 
@@ -713,6 +718,7 @@ ENTRY(serpent_cbc_dec_8way_avx)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	load_8way(%rdx, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
@@ -720,6 +726,7 @@ ENTRY(serpent_cbc_dec_8way_avx)
 
 	store_cbc_8way(%rdx, %rsi, RC1, RD1, RB1, RE1, RC2, RD2, RB2, RE2);
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_cbc_dec_8way_avx)
 
@@ -730,6 +737,7 @@ ENTRY(serpent_ctr_8way_avx)
 	 *	%rdx: src
 	 *	%rcx: iv (little endian, 128bit)
 	 */
+	FRAME_BEGIN
 
 	load_ctr_8way(%rcx, .Lbswap128_mask, RA1, RB1, RC1, RD1, RA2, RB2, RC2,
 		      RD2, RK0, RK1, RK2);
@@ -738,6 +746,7 @@ ENTRY(serpent_ctr_8way_avx)
 
 	store_ctr_8way(%rdx, %rsi, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_ctr_8way_avx)
 
@@ -748,6 +757,7 @@ ENTRY(serpent_xts_enc_8way_avx)
 	 *	%rdx: src
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	/* regs <= src, dst <= IVs, regs <= regs xor IVs */
 	load_xts_8way(%rcx, %rdx, %rsi, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2,
@@ -758,6 +768,7 @@ ENTRY(serpent_xts_enc_8way_avx)
 	/* dst <= regs xor IVs(in dst) */
 	store_xts_8way(%rsi, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_xts_enc_8way_avx)
 
@@ -768,6 +779,7 @@ ENTRY(serpent_xts_dec_8way_avx)
 	 *	%rdx: src
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	/* regs <= src, dst <= IVs, regs <= regs xor IVs */
 	load_xts_8way(%rcx, %rdx, %rsi, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2,
@@ -778,5 +790,6 @@ ENTRY(serpent_xts_dec_8way_avx)
 	/* dst <= regs xor IVs(in dst) */
 	store_xts_8way(%rsi, RC1, RD1, RB1, RE1, RC2, RD2, RB2, RE2);
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_xts_dec_8way_avx)
diff --git a/arch/x86/crypto/serpent-avx2-asm_64.S b/arch/x86/crypto/serpent-avx2-asm_64.S
index b222085cccac..97c48add33ed 100644
--- a/arch/x86/crypto/serpent-avx2-asm_64.S
+++ b/arch/x86/crypto/serpent-avx2-asm_64.S
@@ -15,6 +15,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 #include "glue_helper-asm-avx2.S"
 
 .file "serpent-avx2-asm_64.S"
@@ -673,6 +674,7 @@ ENTRY(serpent_ecb_enc_16way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -684,6 +686,7 @@ ENTRY(serpent_ecb_enc_16way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_ecb_enc_16way)
 
@@ -693,6 +696,7 @@ ENTRY(serpent_ecb_dec_16way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -704,6 +708,7 @@ ENTRY(serpent_ecb_dec_16way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_ecb_dec_16way)
 
@@ -713,6 +718,7 @@ ENTRY(serpent_cbc_dec_16way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -725,6 +731,7 @@ ENTRY(serpent_cbc_dec_16way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_cbc_dec_16way)
 
@@ -735,6 +742,7 @@ ENTRY(serpent_ctr_16way)
 	 *	%rdx: src (16 blocks)
 	 *	%rcx: iv (little endian, 128bit)
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -748,6 +756,7 @@ ENTRY(serpent_ctr_16way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_ctr_16way)
 
@@ -758,6 +767,7 @@ ENTRY(serpent_xts_enc_16way)
 	 *	%rdx: src (16 blocks)
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -772,6 +782,7 @@ ENTRY(serpent_xts_enc_16way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_xts_enc_16way)
 
@@ -782,6 +793,7 @@ ENTRY(serpent_xts_dec_16way)
 	 *	%rdx: src (16 blocks)
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	vzeroupper;
 
@@ -796,5 +808,6 @@ ENTRY(serpent_xts_dec_16way)
 
 	vzeroupper;
 
+	FRAME_END
 	ret;
 ENDPROC(serpent_xts_dec_16way)
diff --git a/arch/x86/crypto/serpent_avx_glue.c b/arch/x86/crypto/serpent_avx_glue.c
index 5dc37026c7ce..6f778d3daa22 100644
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -332,16 +332,11 @@ int xts_serpent_setkey(struct crypto_tfm *tfm, const u8 *key,
 		       unsigned int keylen)
 {
 	struct serpent_xts_ctx *ctx = crypto_tfm_ctx(tfm);
-	u32 *flags = &tfm->crt_flags;
 	int err;
 
-	/* key consists of keys of equal size concatenated, therefore
-	 * the length must be even
-	 */
-	if (keylen % 2) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	err = xts_check_key(tfm, key, keylen);
+	if (err)
+		return err;
 
 	/* first half of xts-key is for crypt */
 	err = __serpent_setkey(&ctx->crypt_ctx, key, keylen / 2);
diff --git a/arch/x86/crypto/serpent_sse2_glue.c b/arch/x86/crypto/serpent_sse2_glue.c
index 3643dd508f45..8943407e8917 100644
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -309,16 +309,11 @@ static int xts_serpent_setkey(struct crypto_tfm *tfm, const u8 *key,
 			      unsigned int keylen)
 {
 	struct serpent_xts_ctx *ctx = crypto_tfm_ctx(tfm);
-	u32 *flags = &tfm->crt_flags;
 	int err;
 
-	/* key consists of keys of equal size concatenated, therefore
-	 * the length must be even
-	 */
-	if (keylen % 2) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	err = xts_check_key(tfm, key, keylen);
+	if (err)
+		return err;
 
 	/* first half of xts-key is for crypt */
 	err = __serpent_setkey(&ctx->crypt_ctx, key, keylen / 2);
diff --git a/arch/x86/crypto/sha-mb/sha1_mb.c b/arch/x86/crypto/sha-mb/sha1_mb.c
index a841e9765bd6..a8a0224fa0f8 100644
--- a/arch/x86/crypto/sha-mb/sha1_mb.c
+++ b/arch/x86/crypto/sha-mb/sha1_mb.c
@@ -762,6 +762,38 @@ static int sha1_mb_async_digest(struct ahash_request *req)
 	return crypto_ahash_digest(mcryptd_req);
 }
 
+static int sha1_mb_async_export(struct ahash_request *req, void *out)
+{
+	struct ahash_request *mcryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm;
+
+	memcpy(mcryptd_req, req, sizeof(*req));
+	ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base);
+	return crypto_ahash_export(mcryptd_req, out);
+}
+
+static int sha1_mb_async_import(struct ahash_request *req, const void *in)
+{
+	struct ahash_request *mcryptd_req = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm);
+	struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm;
+	struct crypto_shash *child = mcryptd_ahash_child(mcryptd_tfm);
+	struct mcryptd_hash_request_ctx *rctx;
+	struct shash_desc *desc;
+
+	memcpy(mcryptd_req, req, sizeof(*req));
+	ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base);
+	rctx = ahash_request_ctx(mcryptd_req);
+	desc = &rctx->desc;
+	desc->tfm = child;
+	desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
+
+	return crypto_ahash_import(mcryptd_req, in);
+}
+
 static int sha1_mb_async_init_tfm(struct crypto_tfm *tfm)
 {
 	struct mcryptd_ahash *mcryptd_tfm;
@@ -796,8 +828,11 @@ static struct ahash_alg sha1_mb_async_alg = {
 	.final          = sha1_mb_async_final,
 	.finup          = sha1_mb_async_finup,
 	.digest         = sha1_mb_async_digest,
+	.export		= sha1_mb_async_export,
+	.import		= sha1_mb_async_import,
 	.halg = {
 		.digestsize     = SHA1_DIGEST_SIZE,
+		.statesize	= sizeof(struct sha1_hash_ctx),
 		.base = {
 			.cra_name               = "sha1",
 			.cra_driver_name        = "sha1_mb",
diff --git a/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S
index 85c4e1cf7172..96df6a39d7e2 100644
--- a/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S
+++ b/arch/x86/crypto/sha-mb/sha1_mb_mgr_flush_avx2.S
@@ -52,6 +52,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 #include <linux/linkage.h>
+#include <asm/frame.h>
 #include "sha1_mb_mgr_datastruct.S"
 
 
@@ -86,16 +87,6 @@
 #define extra_blocks    %arg2
 #define p               %arg2
 
-
-# STACK_SPACE needs to be an odd multiple of 8
-_XMM_SAVE_SIZE  = 10*16
-_GPR_SAVE_SIZE  = 8*8
-_ALIGN_SIZE     = 8
-
-_XMM_SAVE       = 0
-_GPR_SAVE       = _XMM_SAVE + _XMM_SAVE_SIZE
-STACK_SPACE     = _GPR_SAVE + _GPR_SAVE_SIZE + _ALIGN_SIZE
-
 .macro LABEL prefix n
 \prefix\n\():
 .endm
@@ -113,16 +104,8 @@ offset = \_offset
 # JOB* sha1_mb_mgr_flush_avx2(MB_MGR *state)
 # arg 1 : rcx : state
 ENTRY(sha1_mb_mgr_flush_avx2)
-	mov	%rsp, %r10
-	sub     $STACK_SPACE, %rsp
-	and     $~31, %rsp
-	mov     %rbx, _GPR_SAVE(%rsp)
-	mov     %r10, _GPR_SAVE+8*1(%rsp) #save rsp
-	mov	%rbp, _GPR_SAVE+8*3(%rsp)
-	mov	%r12, _GPR_SAVE+8*4(%rsp)
-	mov	%r13, _GPR_SAVE+8*5(%rsp)
-	mov	%r14, _GPR_SAVE+8*6(%rsp)
-	mov	%r15, _GPR_SAVE+8*7(%rsp)
+	FRAME_BEGIN
+	push	%rbx
 
 	# If bit (32+3) is set, then all lanes are empty
 	mov     _unused_lanes(state), unused_lanes
@@ -230,16 +213,8 @@ len_is_0:
 	mov     tmp2_w, offset(job_rax)
 
 return:
-
-	mov     _GPR_SAVE(%rsp), %rbx
-	mov     _GPR_SAVE+8*1(%rsp), %r10 #saved rsp
-	mov	_GPR_SAVE+8*3(%rsp), %rbp
-	mov	_GPR_SAVE+8*4(%rsp), %r12
-	mov	_GPR_SAVE+8*5(%rsp), %r13
-	mov	_GPR_SAVE+8*6(%rsp), %r14
-	mov	_GPR_SAVE+8*7(%rsp), %r15
-	mov     %r10, %rsp
-
+	pop	%rbx
+	FRAME_END
 	ret
 
 return_null:
diff --git a/arch/x86/crypto/sha-mb/sha1_mb_mgr_submit_avx2.S b/arch/x86/crypto/sha-mb/sha1_mb_mgr_submit_avx2.S
index 2ab9560b53c8..63a0d9c8e31f 100644
--- a/arch/x86/crypto/sha-mb/sha1_mb_mgr_submit_avx2.S
+++ b/arch/x86/crypto/sha-mb/sha1_mb_mgr_submit_avx2.S
@@ -53,6 +53,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 #include "sha1_mb_mgr_datastruct.S"
 
 
@@ -86,33 +87,21 @@ job_rax         = %rax
 len             = %rax
 DWORD_len	= %eax
 
-lane            = %rbp
-tmp3            = %rbp
+lane            = %r12
+tmp3            = %r12
 
 tmp             = %r9
 DWORD_tmp	= %r9d
 
 lane_data       = %r10
 
-# STACK_SPACE needs to be an odd multiple of 8
-STACK_SPACE     = 8*8 + 16*10 + 8
-
 # JOB* submit_mb_mgr_submit_avx2(MB_MGR *state, job_sha1 *job)
 # arg 1 : rcx : state
 # arg 2 : rdx : job
 ENTRY(sha1_mb_mgr_submit_avx2)
-
-	mov	%rsp, %r10
-	sub     $STACK_SPACE, %rsp
-	and	$~31, %rsp
-
-	mov     %rbx, (%rsp)
-	mov	%r10, 8*2(%rsp)	#save old rsp
-	mov     %rbp, 8*3(%rsp)
-	mov	%r12, 8*4(%rsp)
-	mov	%r13, 8*5(%rsp)
-	mov	%r14, 8*6(%rsp)
-	mov	%r15, 8*7(%rsp)
+	FRAME_BEGIN
+	push	%rbx
+	push	%r12
 
 	mov     _unused_lanes(state), unused_lanes
 	mov	unused_lanes, lane
@@ -197,22 +186,15 @@ len_is_0:
 	vpinsrd  $1, _args_digest+1*32(state , idx, 4), %xmm0, %xmm0
 	vpinsrd  $2, _args_digest+2*32(state , idx, 4), %xmm0, %xmm0
 	vpinsrd  $3, _args_digest+3*32(state , idx, 4), %xmm0, %xmm0
-	movl    4*32(state, idx, 4), DWORD_tmp
+	movl     _args_digest+4*32(state, idx, 4), DWORD_tmp
 
 	vmovdqu  %xmm0, _result_digest(job_rax)
 	movl    DWORD_tmp, _result_digest+1*16(job_rax)
 
 return:
-
-	mov     (%rsp), %rbx
-	mov	8*2(%rsp), %r10	#save old rsp
-	mov     8*3(%rsp), %rbp
-	mov	8*4(%rsp), %r12
-	mov	8*5(%rsp), %r13
-	mov	8*6(%rsp), %r14
-	mov	8*7(%rsp), %r15
-	mov     %r10, %rsp
-
+	pop	%r12
+	pop	%rbx
+	FRAME_END
 	ret
 
 return_null:
diff --git a/arch/x86/crypto/twofish-avx-x86_64-asm_64.S b/arch/x86/crypto/twofish-avx-x86_64-asm_64.S
index 05058134c443..dc66273e610d 100644
--- a/arch/x86/crypto/twofish-avx-x86_64-asm_64.S
+++ b/arch/x86/crypto/twofish-avx-x86_64-asm_64.S
@@ -24,6 +24,7 @@
  */
 
 #include <linux/linkage.h>
+#include <asm/frame.h>
 #include "glue_helper-asm-avx.S"
 
 .file "twofish-avx-x86_64-asm_64.S"
@@ -333,6 +334,7 @@ ENTRY(twofish_ecb_enc_8way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -342,6 +344,7 @@ ENTRY(twofish_ecb_enc_8way)
 
 	store_8way(%r11, RC1, RD1, RA1, RB1, RC2, RD2, RA2, RB2);
 
+	FRAME_END
 	ret;
 ENDPROC(twofish_ecb_enc_8way)
 
@@ -351,6 +354,7 @@ ENTRY(twofish_ecb_dec_8way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -360,6 +364,7 @@ ENTRY(twofish_ecb_dec_8way)
 
 	store_8way(%r11, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(twofish_ecb_dec_8way)
 
@@ -369,6 +374,7 @@ ENTRY(twofish_cbc_dec_8way)
 	 *	%rsi: dst
 	 *	%rdx: src
 	 */
+	FRAME_BEGIN
 
 	pushq %r12;
 
@@ -383,6 +389,7 @@ ENTRY(twofish_cbc_dec_8way)
 
 	popq %r12;
 
+	FRAME_END
 	ret;
 ENDPROC(twofish_cbc_dec_8way)
 
@@ -393,6 +400,7 @@ ENTRY(twofish_ctr_8way)
 	 *	%rdx: src
 	 *	%rcx: iv (little endian, 128bit)
 	 */
+	FRAME_BEGIN
 
 	pushq %r12;
 
@@ -408,6 +416,7 @@ ENTRY(twofish_ctr_8way)
 
 	popq %r12;
 
+	FRAME_END
 	ret;
 ENDPROC(twofish_ctr_8way)
 
@@ -418,6 +427,7 @@ ENTRY(twofish_xts_enc_8way)
 	 *	%rdx: src
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -430,6 +440,7 @@ ENTRY(twofish_xts_enc_8way)
 	/* dst <= regs xor IVs(in dst) */
 	store_xts_8way(%r11, RC1, RD1, RA1, RB1, RC2, RD2, RA2, RB2);
 
+	FRAME_END
 	ret;
 ENDPROC(twofish_xts_enc_8way)
 
@@ -440,6 +451,7 @@ ENTRY(twofish_xts_dec_8way)
 	 *	%rdx: src
 	 *	%rcx: iv (t ⊕ αⁿ ∈ GF(2¹²⁸))
 	 */
+	FRAME_BEGIN
 
 	movq %rsi, %r11;
 
@@ -452,5 +464,6 @@ ENTRY(twofish_xts_dec_8way)
 	/* dst <= regs xor IVs(in dst) */
 	store_xts_8way(%r11, RA1, RB1, RC1, RD1, RA2, RB2, RC2, RD2);
 
+	FRAME_END
 	ret;
 ENDPROC(twofish_xts_dec_8way)
diff --git a/arch/x86/crypto/twofish_glue_3way.c b/arch/x86/crypto/twofish_glue_3way.c
index 56d8a08ee479..2ebb5e9789f3 100644
--- a/arch/x86/crypto/twofish_glue_3way.c
+++ b/arch/x86/crypto/twofish_glue_3way.c
@@ -277,13 +277,9 @@ int xts_twofish_setkey(struct crypto_tfm *tfm, const u8 *key,
 	u32 *flags = &tfm->crt_flags;
 	int err;
 
-	/* key consists of keys of equal size concatenated, therefore
-	 * the length must be even
-	 */
-	if (keylen % 2) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
-		return -EINVAL;
-	}
+	err = xts_check_key(tfm, key, keylen);
+	if (err)
+		return err;
 
 	/* first half of xts-key is for crypt */
 	err = __twofish_setkey(&ctx->crypt_ctx, key, keylen / 2, flags);
diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile
index bd55dedd7614..fe91c25092da 100644
--- a/arch/x86/entry/Makefile
+++ b/arch/x86/entry/Makefile
@@ -1,6 +1,10 @@
 #
 # Makefile for the x86 low level entry code
 #
+
+OBJECT_FILES_NON_STANDARD_entry_$(BITS).o   := y
+OBJECT_FILES_NON_STANDARD_entry_64_compat.o := y
+
 obj-y				:= entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
 obj-y				+= common.o
 
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 3c71dd947c7b..9a9e5884066c 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -1,3 +1,5 @@
+#include <linux/jump_label.h>
+
 /*
 
  x86 function call convention, 64-bit:
@@ -199,36 +201,18 @@ For 32-bit we have the following conventions - kernel is built with
 	.byte 0xf1
 	.endm
 
-#else /* CONFIG_X86_64 */
+#endif /* CONFIG_X86_64 */
 
 /*
- * For 32bit only simplified versions of SAVE_ALL/RESTORE_ALL. These
- * are different from the entry_32.S versions in not changing the segment
- * registers. So only suitable for in kernel use, not when transitioning
- * from or to user space. The resulting stack frame is not a standard
- * pt_regs frame. The main use case is calling C code from assembler
- * when all the registers need to be preserved.
+ * This does 'call enter_from_user_mode' unless we can avoid it based on
+ * kernel config or using the static jump infrastructure.
  */
-
-	.macro SAVE_ALL
-	pushl %eax
-	pushl %ebp
-	pushl %edi
-	pushl %esi
-	pushl %edx
-	pushl %ecx
-	pushl %ebx
-	.endm
-
-	.macro RESTORE_ALL
-	popl %ebx
-	popl %ecx
-	popl %edx
-	popl %esi
-	popl %edi
-	popl %ebp
-	popl %eax
-	.endm
-
-#endif /* CONFIG_X86_64 */
-
+.macro CALL_enter_from_user_mode
+#ifdef CONFIG_CONTEXT_TRACKING
+#ifdef HAVE_JUMP_LABEL
+	STATIC_JUMP_IF_FALSE .Lafter_call_\@, context_tracking_enabled, def=0
+#endif
+	call enter_from_user_mode
+.Lafter_call_\@:
+#endif
+.endm
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index a89fdbc1f0be..e79d93d44ecd 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -26,6 +26,7 @@
 #include <asm/traps.h>
 #include <asm/vdso.h>
 #include <asm/uaccess.h>
+#include <asm/cpufeature.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
@@ -44,6 +45,8 @@ __visible void enter_from_user_mode(void)
 	CT_WARN_ON(ct_state() != CONTEXT_USER);
 	user_exit();
 }
+#else
+static inline void enter_from_user_mode(void) {}
 #endif
 
 static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch)
@@ -84,17 +87,6 @@ unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch)
 
 	work = ACCESS_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY;
 
-#ifdef CONFIG_CONTEXT_TRACKING
-	/*
-	 * If TIF_NOHZ is set, we are required to call user_exit() before
-	 * doing anything that could touch RCU.
-	 */
-	if (work & _TIF_NOHZ) {
-		enter_from_user_mode();
-		work &= ~_TIF_NOHZ;
-	}
-#endif
-
 #ifdef CONFIG_SECCOMP
 	/*
 	 * Do seccomp first -- it should minimize exposure of other
@@ -171,16 +163,6 @@ long syscall_trace_enter_phase2(struct pt_regs *regs, u32 arch,
 	if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
 		BUG_ON(regs != task_pt_regs(current));
 
-	/*
-	 * If we stepped into a sysenter/syscall insn, it trapped in
-	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
-	 * If user-mode had set TF itself, then it's still clear from
-	 * do_debug() and we need to set it again to restore the user
-	 * state.  If we entered on the slow path, TF was already set.
-	 */
-	if (work & _TIF_SINGLESTEP)
-		regs->flags |= X86_EFLAGS_TF;
-
 #ifdef CONFIG_SECCOMP
 	/*
 	 * Call seccomp_phase2 before running the other hooks so that
@@ -268,6 +250,7 @@ static void exit_to_usermode_loop(struct pt_regs *regs, u32 cached_flags)
 /* Called with IRQs disabled. */
 __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 {
+	struct thread_info *ti = pt_regs_to_thread_info(regs);
 	u32 cached_flags;
 
 	if (IS_ENABLED(CONFIG_PROVE_LOCKING) && WARN_ON(!irqs_disabled()))
@@ -275,12 +258,22 @@ __visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
 
 	lockdep_sys_exit();
 
-	cached_flags =
-		READ_ONCE(pt_regs_to_thread_info(regs)->flags);
+	cached_flags = READ_ONCE(ti->flags);
 
 	if (unlikely(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
 		exit_to_usermode_loop(regs, cached_flags);
 
+#ifdef CONFIG_COMPAT
+	/*
+	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
+	 * returning to user mode.  We need to clear it *after* signal
+	 * handling, because syscall restart has a fixup for compat
+	 * syscalls.  The fixup is exercised by the ptrace_syscall_32
+	 * selftest.
+	 */
+	ti->status &= ~TS_COMPAT;
+#endif
+
 	user_enter();
 }
 
@@ -332,33 +325,45 @@ __visible inline void syscall_return_slowpath(struct pt_regs *regs)
 	if (unlikely(cached_flags & SYSCALL_EXIT_WORK_FLAGS))
 		syscall_slow_exit_work(regs, cached_flags);
 
-#ifdef CONFIG_COMPAT
+	local_irq_disable();
+	prepare_exit_to_usermode(regs);
+}
+
+#ifdef CONFIG_X86_64
+__visible void do_syscall_64(struct pt_regs *regs)
+{
+	struct thread_info *ti = pt_regs_to_thread_info(regs);
+	unsigned long nr = regs->orig_ax;
+
+	enter_from_user_mode();
+	local_irq_enable();
+
+	if (READ_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY)
+		nr = syscall_trace_enter(regs);
+
 	/*
-	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
-	 * returning to user mode.
+	 * NB: Native and x32 syscalls are dispatched from the same
+	 * table.  The only functional difference is the x32 bit in
+	 * regs->orig_ax, which changes the behavior of some syscalls.
 	 */
-	ti->status &= ~TS_COMPAT;
-#endif
+	if (likely((nr & __SYSCALL_MASK) < NR_syscalls)) {
+		regs->ax = sys_call_table[nr & __SYSCALL_MASK](
+			regs->di, regs->si, regs->dx,
+			regs->r10, regs->r8, regs->r9);
+	}
 
-	local_irq_disable();
-	prepare_exit_to_usermode(regs);
+	syscall_return_slowpath(regs);
 }
+#endif
 
 #if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
 /*
- * Does a 32-bit syscall.  Called with IRQs on and does all entry and
- * exit work and returns with IRQs off.  This function is extremely hot
- * in workloads that use it, and it's usually called from
+ * Does a 32-bit syscall.  Called with IRQs on in CONTEXT_KERNEL.  Does
+ * all entry and exit work and returns with IRQs off.  This function is
+ * extremely hot in workloads that use it, and it's usually called from
  * do_fast_syscall_32, so forcibly inline it to improve performance.
  */
-#ifdef CONFIG_X86_32
-/* 32-bit kernels use a trap gate for INT80, and the asm code calls here. */
-__visible
-#else
-/* 64-bit kernels use do_syscall_32_irqs_off() instead. */
-static
-#endif
-__always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
+static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
 {
 	struct thread_info *ti = pt_regs_to_thread_info(regs);
 	unsigned int nr = (unsigned int)regs->orig_ax;
@@ -393,14 +398,13 @@ __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
 	syscall_return_slowpath(regs);
 }
 
-#ifdef CONFIG_X86_64
-/* Handles INT80 on 64-bit kernels */
-__visible void do_syscall_32_irqs_off(struct pt_regs *regs)
+/* Handles int $0x80 */
+__visible void do_int80_syscall_32(struct pt_regs *regs)
 {
+	enter_from_user_mode();
 	local_irq_enable();
 	do_syscall_32_irqs_on(regs);
 }
-#endif
 
 /* Returns 0 to return using IRET or 1 to return using SYSEXIT/SYSRETL. */
 __visible long do_fast_syscall_32(struct pt_regs *regs)
@@ -420,22 +424,21 @@ __visible long do_fast_syscall_32(struct pt_regs *regs)
 	 */
 	regs->ip = landing_pad;
 
-	/*
-	 * Fetch ECX from where the vDSO stashed it.
-	 *
-	 * WARNING: We are in CONTEXT_USER and RCU isn't paying attention!
-	 */
+	enter_from_user_mode();
+
 	local_irq_enable();
+
+	/* Fetch EBP from where the vDSO stashed it. */
 	if (
 #ifdef CONFIG_X86_64
 		/*
 		 * Micro-optimization: the pointer we're following is explicitly
 		 * 32 bits, so it can't be out of range.
 		 */
-		__get_user(*(u32 *)&regs->cx,
+		__get_user(*(u32 *)&regs->bp,
 			    (u32 __user __force *)(unsigned long)(u32)regs->sp)
 #else
-		get_user(*(u32 *)&regs->cx,
+		get_user(*(u32 *)&regs->bp,
 			 (u32 __user __force *)(unsigned long)(u32)regs->sp)
 #endif
 		) {
@@ -443,9 +446,6 @@ __visible long do_fast_syscall_32(struct pt_regs *regs)
 		/* User code screwed up. */
 		local_irq_disable();
 		regs->ax = -EFAULT;
-#ifdef CONFIG_CONTEXT_TRACKING
-		enter_from_user_mode();
-#endif
 		prepare_exit_to_usermode(regs);
 		return 0;	/* Keep it simple: use IRET. */
 	}
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 3eb572ed3d7a..10868aa734dc 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -40,7 +40,7 @@
 #include <asm/processor-flags.h>
 #include <asm/ftrace.h>
 #include <asm/irq_vectors.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 #include <asm/asm.h>
 #include <asm/smap.h>
@@ -287,12 +287,63 @@ need_resched:
 END(resume_kernel)
 #endif
 
-	# SYSENTER  call handler stub
+GLOBAL(__begin_SYSENTER_singlestep_region)
+/*
+ * All code from here through __end_SYSENTER_singlestep_region is subject
+ * to being single-stepped if a user program sets TF and executes SYSENTER.
+ * There is absolutely nothing that we can do to prevent this from happening
+ * (thanks Intel!).  To keep our handling of this situation as simple as
+ * possible, we handle TF just like AC and NT, except that our #DB handler
+ * will ignore all of the single-step traps generated in this range.
+ */
+
+#ifdef CONFIG_XEN
+/*
+ * Xen doesn't set %esp to be precisely what the normal SYSENTER
+ * entry point expects, so fix it up before using the normal path.
+ */
+ENTRY(xen_sysenter_target)
+	addl	$5*4, %esp			/* remove xen-provided frame */
+	jmp	sysenter_past_esp
+#endif
+
+/*
+ * 32-bit SYSENTER entry.
+ *
+ * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
+ * if X86_FEATURE_SEP is available.  This is the preferred system call
+ * entry on 32-bit systems.
+ *
+ * The SYSENTER instruction, in principle, should *only* occur in the
+ * vDSO.  In practice, a small number of Android devices were shipped
+ * with a copy of Bionic that inlined a SYSENTER instruction.  This
+ * never happened in any of Google's Bionic versions -- it only happened
+ * in a narrow range of Intel-provided versions.
+ *
+ * SYSENTER loads SS, ESP, CS, and EIP from previously programmed MSRs.
+ * IF and VM in RFLAGS are cleared (IOW: interrupts are off).
+ * SYSENTER does not save anything on the stack,
+ * and does not save old EIP (!!!), ESP, or EFLAGS.
+ *
+ * To avoid losing track of EFLAGS.VM (and thus potentially corrupting
+ * user and/or vm86 state), we explicitly disable the SYSENTER
+ * instruction in vm86 mode by reprogramming the MSRs.
+ *
+ * Arguments:
+ * eax  system call number
+ * ebx  arg1
+ * ecx  arg2
+ * edx  arg3
+ * esi  arg4
+ * edi  arg5
+ * ebp  user stack
+ * 0(%ebp) arg6
+ */
 ENTRY(entry_SYSENTER_32)
 	movl	TSS_sysenter_sp0(%esp), %esp
 sysenter_past_esp:
 	pushl	$__USER_DS		/* pt_regs->ss */
-	pushl	%ecx			/* pt_regs->cx */
+	pushl	%ebp			/* pt_regs->sp (stashed in bp) */
 	pushfl				/* pt_regs->flags (except IF = 0) */
 	orl	$X86_EFLAGS_IF, (%esp)	/* Fix IF */
 	pushl	$__USER_CS		/* pt_regs->cs */
@@ -301,6 +352,29 @@ sysenter_past_esp:
 	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest */
 
 	/*
+	 * SYSENTER doesn't filter flags, so we need to clear NT, AC
+	 * and TF ourselves.  To save a few cycles, we can check whether
+	 * either was set instead of doing an unconditional popfq.
+	 * This needs to happen before enabling interrupts so that
+	 * we don't get preempted with NT set.
+	 *
+	 * If TF is set, we will single-step all the way to here -- do_debug
+	 * will ignore all the traps.  (Yes, this is slow, but so is
+	 * single-stepping in general.  This allows us to avoid having
+	 * a more complicated code to handle the case where a user program
+	 * forces us to single-step through the SYSENTER entry code.)
+	 *
+	 * NB.: .Lsysenter_fix_flags is a label with the code under it moved
+	 * out-of-line as an optimization: NT is unlikely to be set in the
+	 * majority of the cases and instead of polluting the I$ unnecessarily,
+	 * we're keeping that code behind a branch which will predict as
+	 * not-taken and therefore its instructions won't be fetched.
+	 */
+	testl	$X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, PT_EFLAGS(%esp)
+	jnz	.Lsysenter_fix_flags
+.Lsysenter_flags_fixed:
+
+	/*
 	 * User mode is traced as though IRQs are on, and SYSENTER
 	 * turned them off.
 	 */
@@ -308,8 +382,9 @@ sysenter_past_esp:
 
 	movl	%esp, %eax
 	call	do_fast_syscall_32
-	testl	%eax, %eax
-	jz	.Lsyscall_32_done
+	/* XEN PV guests always use IRET path */
+	ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
+		    "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
 
 /* Opportunistic SYSEXIT */
 	TRACE_IRQS_ON			/* User mode traces as IRQs on. */
@@ -325,10 +400,20 @@ sysenter_past_esp:
 	popl	%eax			/* pt_regs->ax */
 
 	/*
+	 * Restore all flags except IF. (We restore IF separately because
+	 * STI gives a one-instruction window in which we won't be interrupted,
+	 * whereas POPF does not.)
+	 */
+	addl	$PT_EFLAGS-PT_DS, %esp	/* point esp at pt_regs->flags */
+	btr	$X86_EFLAGS_IF_BIT, (%esp)
+	popfl
+
+	/*
 	 * Return back to the vDSO, which will pop ecx and edx.
 	 * Don't bother with DS and ES (they already contain __USER_DS).
 	 */
-	ENABLE_INTERRUPTS_SYSEXIT
+	sti
+	sysexit
 
 .pushsection .fixup, "ax"
 2:	movl	$0, PT_FS(%esp)
@@ -336,28 +421,63 @@ sysenter_past_esp:
 .popsection
 	_ASM_EXTABLE(1b, 2b)
 	PTGS_TO_GS_EX
+
+.Lsysenter_fix_flags:
+	pushl	$X86_EFLAGS_FIXED
+	popfl
+	jmp	.Lsysenter_flags_fixed
+GLOBAL(__end_SYSENTER_singlestep_region)
 ENDPROC(entry_SYSENTER_32)
 
-	# system call handler stub
+/*
+ * 32-bit legacy system call entry.
+ *
+ * 32-bit x86 Linux system calls traditionally used the INT $0x80
+ * instruction.  INT $0x80 lands here.
+ *
+ * This entry point can be used by any 32-bit perform system calls.
+ * Instances of INT $0x80 can be found inline in various programs and
+ * libraries.  It is also used by the vDSO's __kernel_vsyscall
+ * fallback for hardware that doesn't support a faster entry method.
+ * Restarted 32-bit system calls also fall back to INT $0x80
+ * regardless of what instruction was originally used to do the system
+ * call.  (64-bit programs can use INT $0x80 as well, but they can
+ * only run on 64-bit kernels and therefore land in
+ * entry_INT80_compat.)
+ *
+ * This is considered a slow path.  It is not used by most libc
+ * implementations on modern hardware except during process startup.
+ *
+ * Arguments:
+ * eax  system call number
+ * ebx  arg1
+ * ecx  arg2
+ * edx  arg3
+ * esi  arg4
+ * edi  arg5
+ * ebp  arg6
+ */
 ENTRY(entry_INT80_32)
 	ASM_CLAC
 	pushl	%eax			/* pt_regs->orig_ax */
 	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest */
 
 	/*
-	 * User mode is traced as though IRQs are on.  Unlike the 64-bit
-	 * case, INT80 is a trap gate on 32-bit kernels, so interrupts
-	 * are already on (unless user code is messing around with iopl).
+	 * User mode is traced as though IRQs are on, and the interrupt gate
+	 * turned them off.
 	 */
+	TRACE_IRQS_OFF
 
 	movl	%esp, %eax
-	call	do_syscall_32_irqs_on
+	call	do_int80_syscall_32
 .Lsyscall_32_done:
 
 restore_all:
 	TRACE_IRQS_IRET
 restore_all_notrace:
 #ifdef CONFIG_X86_ESPFIX32
+	ALTERNATIVE	"jmp restore_nocheck", "", X86_BUG_ESPFIX
+
 	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
 	/*
 	 * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
@@ -384,19 +504,6 @@ ENTRY(iret_exc	)
 
 #ifdef CONFIG_X86_ESPFIX32
 ldt_ss:
-#ifdef CONFIG_PARAVIRT
-	/*
-	 * The kernel can't run on a non-flat stack if paravirt mode
-	 * is active.  Rather than try to fixup the high bits of
-	 * ESP, bypass this code entirely.  This may break DOSemu
-	 * and/or Wine support in a paravirt VM, although the option
-	 * is still available to implement the setting of the high
-	 * 16-bits in the INTERRUPT_RETURN paravirt-op.
-	 */
-	cmpl	$0, pv_info+PARAVIRT_enabled
-	jne	restore_nocheck
-#endif
-
 /*
  * Setup and switch to ESPFIX stack
  *
@@ -551,11 +658,6 @@ ENTRY(native_iret)
 	iret
 	_ASM_EXTABLE(native_iret, iret_exc)
 END(native_iret)
-
-ENTRY(native_irq_enable_sysexit)
-	sti
-	sysexit
-END(native_irq_enable_sysexit)
 #endif
 
 ENTRY(overflow)
@@ -634,14 +736,6 @@ ENTRY(spurious_interrupt_bug)
 END(spurious_interrupt_bug)
 
 #ifdef CONFIG_XEN
-/*
- * Xen doesn't set %esp to be precisely what the normal SYSENTER
- * entry point expects, so fix it up before using the normal path.
- */
-ENTRY(xen_sysenter_target)
-	addl	$5*4, %esp			/* remove xen-provided frame */
-	jmp	sysenter_past_esp
-
 ENTRY(xen_hypervisor_callback)
 	pushl	$-1				/* orig_ax = -1 => not a system call */
 	SAVE_ALL
@@ -941,51 +1035,48 @@ error_code:
 	jmp	ret_from_exception
 END(page_fault)
 
-/*
- * Debug traps and NMI can happen at the one SYSENTER instruction
- * that sets up the real kernel stack. Check here, since we can't
- * allow the wrong stack to be used.
- *
- * "TSS_sysenter_sp0+12" is because the NMI/debug handler will have
- * already pushed 3 words if it hits on the sysenter instruction:
- * eflags, cs and eip.
- *
- * We just load the right stack, and push the three (known) values
- * by hand onto the new stack - while updating the return eip past
- * the instruction that would have done it for sysenter.
- */
-.macro FIX_STACK offset ok label
-	cmpw	$__KERNEL_CS, 4(%esp)
-	jne	\ok
-\label:
-	movl	TSS_sysenter_sp0 + \offset(%esp), %esp
-	pushfl
-	pushl	$__KERNEL_CS
-	pushl	$sysenter_past_esp
-.endm
-
 ENTRY(debug)
+	/*
+	 * #DB can happen at the first instruction of
+	 * entry_SYSENTER_32 or in Xen's SYSENTER prologue.  If this
+	 * happens, then we will be running on a very small stack.  We
+	 * need to detect this condition and switch to the thread
+	 * stack before calling any C code at all.
+	 *
+	 * If you edit this code, keep in mind that NMIs can happen in here.
+	 */
 	ASM_CLAC
-	cmpl	$entry_SYSENTER_32, (%esp)
-	jne	debug_stack_correct
-	FIX_STACK 12, debug_stack_correct, debug_esp_fix_insn
-debug_stack_correct:
 	pushl	$-1				# mark this as an int
 	SAVE_ALL
-	TRACE_IRQS_OFF
 	xorl	%edx, %edx			# error code 0
 	movl	%esp, %eax			# pt_regs pointer
+
+	/* Are we currently on the SYSENTER stack? */
+	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */
+	cmpl	$SIZEOF_SYSENTER_stack, %ecx
+	jb	.Ldebug_from_sysenter_stack
+
+	TRACE_IRQS_OFF
 	call	do_debug
 	jmp	ret_from_exception
+
+.Ldebug_from_sysenter_stack:
+	/* We're on the SYSENTER stack.  Switch off. */
+	movl	%esp, %ebp
+	movl	PER_CPU_VAR(cpu_current_top_of_stack), %esp
+	TRACE_IRQS_OFF
+	call	do_debug
+	movl	%ebp, %esp
+	jmp	ret_from_exception
 END(debug)
 
 /*
- * NMI is doubly nasty. It can happen _while_ we're handling
- * a debug fault, and the debug fault hasn't yet been able to
- * clear up the stack. So we first check whether we got  an
- * NMI on the sysenter entry path, but after that we need to
- * check whether we got an NMI on the debug path where the debug
- * fault happened on the sysenter path.
+ * NMI is doubly nasty.  It can happen on the first instruction of
+ * entry_SYSENTER_32 (just like #DB), but it can also interrupt the beginning
+ * of the #DB handler even if that #DB in turn hit before entry_SYSENTER_32
+ * switched stacks.  We handle both conditions by simply checking whether we
+ * interrupted kernel code running on the SYSENTER stack.
  */
 ENTRY(nmi)
 	ASM_CLAC
@@ -996,41 +1087,32 @@ ENTRY(nmi)
 	popl	%eax
 	je	nmi_espfix_stack
 #endif
-	cmpl	$entry_SYSENTER_32, (%esp)
-	je	nmi_stack_fixup
-	pushl	%eax
-	movl	%esp, %eax
-	/*
-	 * Do not access memory above the end of our stack page,
-	 * it might not exist.
-	 */
-	andl	$(THREAD_SIZE-1), %eax
-	cmpl	$(THREAD_SIZE-20), %eax
-	popl	%eax
-	jae	nmi_stack_correct
-	cmpl	$entry_SYSENTER_32, 12(%esp)
-	je	nmi_debug_stack_check
-nmi_stack_correct:
-	pushl	%eax
+
+	pushl	%eax				# pt_regs->orig_ax
 	SAVE_ALL
 	xorl	%edx, %edx			# zero error code
 	movl	%esp, %eax			# pt_regs pointer
+
+	/* Are we currently on the SYSENTER stack? */
+	PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
+	subl	%eax, %ecx	/* ecx = (end of SYSENTER_stack) - esp */
+	cmpl	$SIZEOF_SYSENTER_stack, %ecx
+	jb	.Lnmi_from_sysenter_stack
+
+	/* Not on SYSENTER stack. */
 	call	do_nmi
 	jmp	restore_all_notrace
 
-nmi_stack_fixup:
-	FIX_STACK 12, nmi_stack_correct, 1
-	jmp	nmi_stack_correct
-
-nmi_debug_stack_check:
-	cmpw	$__KERNEL_CS, 16(%esp)
-	jne	nmi_stack_correct
-	cmpl	$debug, (%esp)
-	jb	nmi_stack_correct
-	cmpl	$debug_esp_fix_insn, (%esp)
-	ja	nmi_stack_correct
-	FIX_STACK 24, nmi_stack_correct, 1
-	jmp	nmi_stack_correct
+.Lnmi_from_sysenter_stack:
+	/*
+	 * We're on the SYSENTER stack.  Switch off.  No one (not even debug)
+	 * is using the thread stack right now, so it's safe for us to use it.
+	 */
+	movl	%esp, %ebp
+	movl	PER_CPU_VAR(cpu_current_top_of_stack), %esp
+	call	do_nmi
+	movl	%ebp, %esp
+	jmp	restore_all_notrace
 
 #ifdef CONFIG_X86_ESPFIX32
 nmi_espfix_stack:
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 53616ca03244..858b555e274b 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -103,6 +103,16 @@ ENDPROC(native_usergs_sysret64)
 /*
  * 64-bit SYSCALL instruction entry. Up to 6 arguments in registers.
  *
+ * This is the only entry point used for 64-bit system calls.  The
+ * hardware interface is reasonably well designed and the register to
+ * argument mapping Linux uses fits well with the registers that are
+ * available when SYSCALL is used.
+ *
+ * SYSCALL instructions can be found inlined in libc implementations as
+ * well as some other programs and libraries.  There are also a handful
+ * of SYSCALL instructions in the vDSO used, for example, as a
+ * clock_gettimeofday fallback.
+ *
  * 64-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
  * then loads new ss, cs, and rip from previously programmed MSRs.
  * rflags gets masked by a value from another MSR (so CLD and CLAC
@@ -145,17 +155,11 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
 	movq	%rsp, PER_CPU_VAR(rsp_scratch)
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
+	TRACE_IRQS_OFF
+
 	/* Construct struct pt_regs on stack */
 	pushq	$__USER_DS			/* pt_regs->ss */
 	pushq	PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
-	/*
-	 * Re-enable interrupts.
-	 * We use 'rsp_scratch' as a scratch space, hence irq-off block above
-	 * must execute atomically in the face of possible interrupt-driven
-	 * task preemption. We must enable interrupts only after we're done
-	 * with using rsp_scratch:
-	 */
-	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushq	%r11				/* pt_regs->flags */
 	pushq	$__USER_CS			/* pt_regs->cs */
 	pushq	%rcx				/* pt_regs->ip */
@@ -171,9 +175,21 @@ GLOBAL(entry_SYSCALL_64_after_swapgs)
 	pushq	%r11				/* pt_regs->r11 */
 	sub	$(6*8), %rsp			/* pt_regs->bp, bx, r12-15 not saved */
 
-	testl	$_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz	tracesys
+	/*
+	 * If we need to do entry work or if we guess we'll need to do
+	 * exit work, go straight to the slow path.
+	 */
+	testl	$_TIF_WORK_SYSCALL_ENTRY|_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
+	jnz	entry_SYSCALL64_slow_path
+
 entry_SYSCALL_64_fastpath:
+	/*
+	 * Easy case: enable interrupts and issue the syscall.  If the syscall
+	 * needs pt_regs, we'll call a stub that disables interrupts again
+	 * and jumps to the slow path.
+	 */
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_NONE)
 #if __SYSCALL_MASK == ~0
 	cmpq	$__NR_syscall_max, %rax
 #else
@@ -182,103 +198,56 @@ entry_SYSCALL_64_fastpath:
 #endif
 	ja	1f				/* return -ENOSYS (already in pt_regs->ax) */
 	movq	%r10, %rcx
+
+	/*
+	 * This call instruction is handled specially in stub_ptregs_64.
+	 * It might end up jumping to the slow path.  If it jumps, RAX
+	 * and all argument registers are clobbered.
+	 */
 	call	*sys_call_table(, %rax, 8)
+.Lentry_SYSCALL_64_after_fastpath_call:
+
 	movq	%rax, RAX(%rsp)
 1:
-/*
- * Syscall return path ending with SYSRET (fast path).
- * Has incompletely filled pt_regs.
- */
-	LOCKDEP_SYS_EXIT
-	/*
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	DISABLE_INTERRUPTS(CLBR_NONE)
 
 	/*
-	 * We must check ti flags with interrupts (or at least preemption)
-	 * off because we must *never* return to userspace without
-	 * processing exit work that is enqueued if we're preempted here.
-	 * In particular, returning to userspace with any of the one-shot
-	 * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
-	 * very bad.
+	 * If we get here, then we know that pt_regs is clean for SYSRET64.
+	 * If we see that no exit work is required (which we are required
+	 * to check with IRQs off), then we can go straight to SYSRET64.
 	 */
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
 	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz	int_ret_from_sys_call_irqs_off	/* Go to the slow path */
+	jnz	1f
 
-	RESTORE_C_REGS_EXCEPT_RCX_R11
+	LOCKDEP_SYS_EXIT
+	TRACE_IRQS_ON		/* user mode is traced as IRQs on */
 	movq	RIP(%rsp), %rcx
 	movq	EFLAGS(%rsp), %r11
+	RESTORE_C_REGS_EXCEPT_RCX_R11
 	movq	RSP(%rsp), %rsp
-	/*
-	 * 64-bit SYSRET restores rip from rcx,
-	 * rflags from r11 (but RF and VM bits are forced to 0),
-	 * cs and ss are loaded from MSRs.
-	 * Restoration of rflags re-enables interrupts.
-	 *
-	 * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
-	 * descriptor is not reinitialized.  This means that we should
-	 * avoid SYSRET with SS == NULL, which could happen if we schedule,
-	 * exit the kernel, and re-enter using an interrupt vector.  (All
-	 * interrupt entries on x86_64 set SS to NULL.)  We prevent that
-	 * from happening by reloading SS in __switch_to.  (Actually
-	 * detecting the failure in 64-bit userspace is tricky but can be
-	 * done.)
-	 */
 	USERGS_SYSRET64
 
-GLOBAL(int_ret_from_sys_call_irqs_off)
+1:
+	/*
+	 * The fast path looked good when we started, but something changed
+	 * along the way and we need to switch to the slow path.  Calling
+	 * raise(3) will trigger this, for example.  IRQs are off.
+	 */
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	jmp int_ret_from_sys_call
-
-	/* Do syscall entry tracing */
-tracesys:
-	movq	%rsp, %rdi
-	movl	$AUDIT_ARCH_X86_64, %esi
-	call	syscall_trace_enter_phase1
-	test	%rax, %rax
-	jnz	tracesys_phase2			/* if needed, run the slow path */
-	RESTORE_C_REGS_EXCEPT_RAX		/* else restore clobbered regs */
-	movq	ORIG_RAX(%rsp), %rax
-	jmp	entry_SYSCALL_64_fastpath	/* and return to the fast path */
-
-tracesys_phase2:
 	SAVE_EXTRA_REGS
 	movq	%rsp, %rdi
-	movl	$AUDIT_ARCH_X86_64, %esi
-	movq	%rax, %rdx
-	call	syscall_trace_enter_phase2
-
-	/*
-	 * Reload registers from stack in case ptrace changed them.
-	 * We don't reload %rax because syscall_trace_entry_phase2() returned
-	 * the value it wants us to use in the table lookup.
-	 */
-	RESTORE_C_REGS_EXCEPT_RAX
-	RESTORE_EXTRA_REGS
-#if __SYSCALL_MASK == ~0
-	cmpq	$__NR_syscall_max, %rax
-#else
-	andl	$__SYSCALL_MASK, %eax
-	cmpl	$__NR_syscall_max, %eax
-#endif
-	ja	1f				/* return -ENOSYS (already in pt_regs->ax) */
-	movq	%r10, %rcx			/* fixup for C */
-	call	*sys_call_table(, %rax, 8)
-	movq	%rax, RAX(%rsp)
-1:
-	/* Use IRET because user could have changed pt_regs->foo */
+	call	syscall_return_slowpath	/* returns with IRQs disabled */
+	jmp	return_from_SYSCALL_64
 
-/*
- * Syscall return path ending with IRET.
- * Has correct iret frame.
- */
-GLOBAL(int_ret_from_sys_call)
+entry_SYSCALL64_slow_path:
+	/* IRQs are off. */
 	SAVE_EXTRA_REGS
 	movq	%rsp, %rdi
-	call	syscall_return_slowpath	/* returns with IRQs disabled */
+	call	do_syscall_64		/* returns with IRQs disabled */
+
+return_from_SYSCALL_64:
 	RESTORE_EXTRA_REGS
 	TRACE_IRQS_IRETQ		/* we're about to change IF */
 
@@ -355,83 +324,45 @@ opportunistic_sysret_failed:
 	jmp	restore_c_regs_and_iret
 END(entry_SYSCALL_64)
 
+ENTRY(stub_ptregs_64)
+	/*
+	 * Syscalls marked as needing ptregs land here.
+	 * If we are on the fast path, we need to save the extra regs,
+	 * which we achieve by trying again on the slow path.  If we are on
+	 * the slow path, the extra regs are already saved.
+	 *
+	 * RAX stores a pointer to the C function implementing the syscall.
+	 * IRQs are on.
+	 */
+	cmpq	$.Lentry_SYSCALL_64_after_fastpath_call, (%rsp)
+	jne	1f
 
-	.macro FORK_LIKE func
-ENTRY(stub_\func)
-	SAVE_EXTRA_REGS 8
-	jmp	sys_\func
-END(stub_\func)
-	.endm
-
-	FORK_LIKE  clone
-	FORK_LIKE  fork
-	FORK_LIKE  vfork
-
-ENTRY(stub_execve)
-	call	sys_execve
-return_from_execve:
-	testl	%eax, %eax
-	jz	1f
-	/* exec failed, can use fast SYSRET code path in this case */
-	ret
-1:
-	/* must use IRET code path (pt_regs->cs may have changed) */
-	addq	$8, %rsp
-	ZERO_EXTRA_REGS
-	movq	%rax, RAX(%rsp)
-	jmp	int_ret_from_sys_call
-END(stub_execve)
-/*
- * Remaining execve stubs are only 7 bytes long.
- * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
- */
-	.align	8
-GLOBAL(stub_execveat)
-	call	sys_execveat
-	jmp	return_from_execve
-END(stub_execveat)
-
-#if defined(CONFIG_X86_X32_ABI)
-	.align	8
-GLOBAL(stub_x32_execve)
-	call	compat_sys_execve
-	jmp	return_from_execve
-END(stub_x32_execve)
-	.align	8
-GLOBAL(stub_x32_execveat)
-	call	compat_sys_execveat
-	jmp	return_from_execve
-END(stub_x32_execveat)
-#endif
-
-/*
- * sigreturn is special because it needs to restore all registers on return.
- * This cannot be done with SYSRET, so use the IRET return path instead.
- */
-ENTRY(stub_rt_sigreturn)
 	/*
-	 * SAVE_EXTRA_REGS result is not normally needed:
-	 * sigreturn overwrites all pt_regs->GPREGS.
-	 * But sigreturn can fail (!), and there is no easy way to detect that.
-	 * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
-	 * we SAVE_EXTRA_REGS here.
+	 * Called from fast path -- disable IRQs again, pop return address
+	 * and jump to slow path
 	 */
-	SAVE_EXTRA_REGS 8
-	call	sys_rt_sigreturn
-return_from_stub:
-	addq	$8, %rsp
-	RESTORE_EXTRA_REGS
-	movq	%rax, RAX(%rsp)
-	jmp	int_ret_from_sys_call
-END(stub_rt_sigreturn)
+	DISABLE_INTERRUPTS(CLBR_NONE)
+	TRACE_IRQS_OFF
+	popq	%rax
+	jmp	entry_SYSCALL64_slow_path
 
-#ifdef CONFIG_X86_X32_ABI
-ENTRY(stub_x32_rt_sigreturn)
-	SAVE_EXTRA_REGS 8
-	call	sys32_x32_rt_sigreturn
-	jmp	return_from_stub
-END(stub_x32_rt_sigreturn)
-#endif
+1:
+	/* Called from C */
+	jmp	*%rax				/* called from C */
+END(stub_ptregs_64)
+
+.macro ptregs_stub func
+ENTRY(ptregs_\func)
+	leaq	\func(%rip), %rax
+	jmp	stub_ptregs_64
+END(ptregs_\func)
+.endm
+
+/* Instantiate ptregs_stub for each ptregs-using syscall */
+#define __SYSCALL_64_QUAL_(sym)
+#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_stub sym
+#define __SYSCALL_64(nr, sym, qual) __SYSCALL_64_QUAL_##qual(sym)
+#include <asm/syscalls_64.h>
 
 /*
  * A newly forked process directly context switches into this address.
@@ -439,7 +370,6 @@ END(stub_x32_rt_sigreturn)
  * rdi: prev task we switched from
  */
 ENTRY(ret_from_fork)
-
 	LOCK ; btr $TIF_FORK, TI_flags(%r8)
 
 	pushq	$0x0002
@@ -447,28 +377,32 @@ ENTRY(ret_from_fork)
 
 	call	schedule_tail			/* rdi: 'prev' task parameter */
 
-	RESTORE_EXTRA_REGS
-
 	testb	$3, CS(%rsp)			/* from kernel_thread? */
+	jnz	1f
 
 	/*
-	 * By the time we get here, we have no idea whether our pt_regs,
-	 * ti flags, and ti status came from the 64-bit SYSCALL fast path,
-	 * the slow path, or one of the 32-bit compat paths.
-	 * Use IRET code path to return, since it can safely handle
-	 * all of the above.
+	 * We came from kernel_thread.  This code path is quite twisted, and
+	 * someone should clean it up.
+	 *
+	 * copy_thread_tls stashes the function pointer in RBX and the
+	 * parameter to be passed in RBP.  The called function is permitted
+	 * to call do_execve and thereby jump to user mode.
 	 */
-	jnz	int_ret_from_sys_call
+	movq	RBP(%rsp), %rdi
+	call	*RBX(%rsp)
+	movl	$0, RAX(%rsp)
 
 	/*
-	 * We came from kernel_thread
-	 * nb: we depend on RESTORE_EXTRA_REGS above
+	 * Fall through as though we're exiting a syscall.  This makes a
+	 * twisted sort of sense if we just called do_execve.
 	 */
-	movq	%rbp, %rdi
-	call	*%rbx
-	movl	$0, RAX(%rsp)
-	RESTORE_EXTRA_REGS
-	jmp	int_ret_from_sys_call
+
+1:
+	movq	%rsp, %rdi
+	call	syscall_return_slowpath	/* returns with IRQs disabled */
+	TRACE_IRQS_ON			/* user mode is traced as IRQS on */
+	SWAPGS
+	jmp	restore_regs_and_iret
 END(ret_from_fork)
 
 /*
@@ -509,9 +443,18 @@ END(irq_entries_start)
 	 * tracking that we're in kernel mode.
 	 */
 	SWAPGS
-#ifdef CONFIG_CONTEXT_TRACKING
-	call enter_from_user_mode
-#endif
+
+	/*
+	 * We need to tell lockdep that IRQs are off.  We can't do this until
+	 * we fix gsbase, and we should do it before enter_from_user_mode
+	 * (which can take locks).  Since TRACE_IRQS_OFF idempotent,
+	 * the simplest way to handle it is to just call it twice if
+	 * we enter from user mode.  There's no reason to optimize this since
+	 * TRACE_IRQS_OFF is a no-op if lockdep is off.
+	 */
+	TRACE_IRQS_OFF
+
+	CALL_enter_from_user_mode
 
 1:
 	/*
@@ -1049,12 +992,16 @@ ENTRY(error_entry)
 	SWAPGS
 
 .Lerror_entry_from_usermode_after_swapgs:
-#ifdef CONFIG_CONTEXT_TRACKING
-	call enter_from_user_mode
-#endif
+	/*
+	 * We need to tell lockdep that IRQs are off.  We can't do this until
+	 * we fix gsbase, and we should do it before enter_from_user_mode
+	 * (which can take locks).
+	 */
+	TRACE_IRQS_OFF
+	CALL_enter_from_user_mode
+	ret
 
 .Lerror_entry_done:
-
 	TRACE_IRQS_OFF
 	ret
 
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index c3201830a85e..847f2f0c31e5 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -18,20 +18,22 @@
 
 	.section .entry.text, "ax"
 
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret32)
-	swapgs
-	sysretl
-ENDPROC(native_usergs_sysret32)
-#endif
-
 /*
- * 32-bit SYSENTER instruction entry.
+ * 32-bit SYSENTER entry.
  *
- * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
- * IF and VM in rflags are cleared (IOW: interrupts are off).
+ * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
+ * on 64-bit kernels running on Intel CPUs.
+ *
+ * The SYSENTER instruction, in principle, should *only* occur in the
+ * vDSO.  In practice, a small number of Android devices were shipped
+ * with a copy of Bionic that inlined a SYSENTER instruction.  This
+ * never happened in any of Google's Bionic versions -- it only happened
+ * in a narrow range of Intel-provided versions.
+ *
+ * SYSENTER loads SS, RSP, CS, and RIP from previously programmed MSRs.
+ * IF and VM in RFLAGS are cleared (IOW: interrupts are off).
  * SYSENTER does not save anything on the stack,
- * and does not save old rip (!!!) and rflags.
+ * and does not save old RIP (!!!), RSP, or RFLAGS.
  *
  * Arguments:
  * eax  system call number
@@ -42,10 +44,6 @@ ENDPROC(native_usergs_sysret32)
  * edi  arg5
  * ebp  user stack
  * 0(%ebp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
  */
 ENTRY(entry_SYSENTER_compat)
 	/* Interrupts are off on entry. */
@@ -63,7 +61,7 @@ ENTRY(entry_SYSENTER_compat)
 
 	/* Construct struct pt_regs on stack */
 	pushq	$__USER32_DS		/* pt_regs->ss */
-	pushq	%rcx			/* pt_regs->sp */
+	pushq	%rbp			/* pt_regs->sp (stashed in bp) */
 
 	/*
 	 * Push flags.  This is nasty.  First, interrupts are currently
@@ -73,8 +71,6 @@ ENTRY(entry_SYSENTER_compat)
 	 */
 	pushfq				/* pt_regs->flags (except IF = 0) */
 	orl	$X86_EFLAGS_IF, (%rsp)	/* Fix saved flags */
-	ASM_CLAC			/* Clear AC after saving FLAGS */
-
 	pushq	$__USER32_CS		/* pt_regs->cs */
 	xorq    %r8,%r8
 	pushq	%r8			/* pt_regs->ip = 0 (placeholder) */
@@ -82,14 +78,14 @@ ENTRY(entry_SYSENTER_compat)
 	pushq	%rdi			/* pt_regs->di */
 	pushq	%rsi			/* pt_regs->si */
 	pushq	%rdx			/* pt_regs->dx */
-	pushq	%rcx			/* pt_regs->cx (will be overwritten) */
+	pushq	%rcx			/* pt_regs->cx */
 	pushq	$-ENOSYS		/* pt_regs->ax */
 	pushq   %r8                     /* pt_regs->r8  = 0 */
 	pushq   %r8                     /* pt_regs->r9  = 0 */
 	pushq   %r8                     /* pt_regs->r10 = 0 */
 	pushq   %r8                     /* pt_regs->r11 = 0 */
 	pushq   %rbx                    /* pt_regs->rbx */
-	pushq   %rbp                    /* pt_regs->rbp */
+	pushq   %rbp                    /* pt_regs->rbp (will be overwritten) */
 	pushq   %r8                     /* pt_regs->r12 = 0 */
 	pushq   %r8                     /* pt_regs->r13 = 0 */
 	pushq   %r8                     /* pt_regs->r14 = 0 */
@@ -97,21 +93,27 @@ ENTRY(entry_SYSENTER_compat)
 	cld
 
 	/*
-	 * Sysenter doesn't filter flags, so we need to clear NT
+	 * SYSENTER doesn't filter flags, so we need to clear NT and AC
 	 * ourselves.  To save a few cycles, we can check whether
-	 * NT was set instead of doing an unconditional popfq.
+	 * either was set instead of doing an unconditional popfq.
 	 * This needs to happen before enabling interrupts so that
 	 * we don't get preempted with NT set.
 	 *
-	 * NB.: sysenter_fix_flags is a label with the code under it moved
+	 * If TF is set, we will single-step all the way to here -- do_debug
+	 * will ignore all the traps.  (Yes, this is slow, but so is
+	 * single-stepping in general.  This allows us to avoid having
+	 * a more complicated code to handle the case where a user program
+	 * forces us to single-step through the SYSENTER entry code.)
+	 *
+	 * NB.: .Lsysenter_fix_flags is a label with the code under it moved
 	 * out-of-line as an optimization: NT is unlikely to be set in the
 	 * majority of the cases and instead of polluting the I$ unnecessarily,
 	 * we're keeping that code behind a branch which will predict as
 	 * not-taken and therefore its instructions won't be fetched.
 	 */
-	testl	$X86_EFLAGS_NT, EFLAGS(%rsp)
-	jnz	sysenter_fix_flags
-sysenter_flags_fixed:
+	testl	$X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, EFLAGS(%rsp)
+	jnz	.Lsysenter_fix_flags
+.Lsysenter_flags_fixed:
 
 	/*
 	 * User mode is traced as though IRQs are on, and SYSENTER
@@ -121,28 +123,51 @@ sysenter_flags_fixed:
 
 	movq	%rsp, %rdi
 	call	do_fast_syscall_32
-	testl	%eax, %eax
-	jz	.Lsyscall_32_done
+	/* XEN PV guests always use IRET path */
+	ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
+		    "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
 	jmp	sysret32_from_system_call
 
-sysenter_fix_flags:
+.Lsysenter_fix_flags:
 	pushq	$X86_EFLAGS_FIXED
 	popfq
-	jmp	sysenter_flags_fixed
+	jmp	.Lsysenter_flags_fixed
+GLOBAL(__end_entry_SYSENTER_compat)
 ENDPROC(entry_SYSENTER_compat)
 
 /*
- * 32-bit SYSCALL instruction entry.
+ * 32-bit SYSCALL entry.
+ *
+ * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
+ * on 64-bit kernels running on AMD CPUs.
+ *
+ * The SYSCALL instruction, in principle, should *only* occur in the
+ * vDSO.  In practice, it appears that this really is the case.
+ * As evidence:
  *
- * 32-bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
+ *  - The calling convention for SYSCALL has changed several times without
+ *    anyone noticing.
  *
- * Note: rflags saving+masking-with-MSR happens only in Long mode
+ *  - Prior to the in-kernel X86_BUG_SYSRET_SS_ATTRS fixup, anything
+ *    user task that did SYSCALL without immediately reloading SS
+ *    would randomly crash.
+ *
+ *  - Most programmers do not directly target AMD CPUs, and the 32-bit
+ *    SYSCALL instruction does not exist on Intel CPUs.  Even on AMD
+ *    CPUs, Linux disables the SYSCALL instruction on 32-bit kernels
+ *    because the SYSCALL instruction in legacy/native 32-bit mode (as
+ *    opposed to compat mode) is sufficiently poorly designed as to be
+ *    essentially unusable.
+ *
+ * 32-bit SYSCALL saves RIP to RCX, clears RFLAGS.RF, then saves
+ * RFLAGS to R11, then loads new SS, CS, and RIP from previously
+ * programmed MSRs.  RFLAGS gets masked by a value from another MSR
+ * (so CLD and CLAC are not needed).  SYSCALL does not save anything on
+ * the stack and does not change RSP.
+ *
+ * Note: RFLAGS saving+masking-with-MSR happens only in Long mode
  * (in legacy 32-bit mode, IF, RF and VM bits are cleared and that's it).
- * Don't get confused: rflags saving+masking depends on Long Mode Active bit
+ * Don't get confused: RFLAGS saving+masking depends on Long Mode Active bit
  * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
  * or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
  *
@@ -178,7 +203,7 @@ ENTRY(entry_SYSCALL_compat)
 	pushq	%rdi			/* pt_regs->di */
 	pushq	%rsi			/* pt_regs->si */
 	pushq	%rdx			/* pt_regs->dx */
-	pushq	%rcx			/* pt_regs->cx (will be overwritten) */
+	pushq	%rbp			/* pt_regs->cx (stashed in bp) */
 	pushq	$-ENOSYS		/* pt_regs->ax */
 	xorq    %r8,%r8
 	pushq   %r8                     /* pt_regs->r8  = 0 */
@@ -186,7 +211,7 @@ ENTRY(entry_SYSCALL_compat)
 	pushq   %r8                     /* pt_regs->r10 = 0 */
 	pushq   %r8                     /* pt_regs->r11 = 0 */
 	pushq   %rbx                    /* pt_regs->rbx */
-	pushq   %rbp                    /* pt_regs->rbp */
+	pushq   %rbp                    /* pt_regs->rbp (will be overwritten) */
 	pushq   %r8                     /* pt_regs->r12 = 0 */
 	pushq   %r8                     /* pt_regs->r13 = 0 */
 	pushq   %r8                     /* pt_regs->r14 = 0 */
@@ -200,8 +225,9 @@ ENTRY(entry_SYSCALL_compat)
 
 	movq	%rsp, %rdi
 	call	do_fast_syscall_32
-	testl	%eax, %eax
-	jz	.Lsyscall_32_done
+	/* XEN PV guests always use IRET path */
+	ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
+		    "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
 
 	/* Opportunistic SYSRET */
 sysret32_from_system_call:
@@ -236,11 +262,26 @@ sysret32_from_system_call:
 	xorq	%r9, %r9
 	xorq	%r10, %r10
 	movq	RSP-ORIG_RAX(%rsp), %rsp
-        USERGS_SYSRET32
+	swapgs
+	sysretl
 END(entry_SYSCALL_compat)
 
 /*
- * Emulated IA32 system calls via int 0x80.
+ * 32-bit legacy system call entry.
+ *
+ * 32-bit x86 Linux system calls traditionally used the INT $0x80
+ * instruction.  INT $0x80 lands here.
+ *
+ * This entry point can be used by 32-bit and 64-bit programs to perform
+ * 32-bit system calls.  Instances of INT $0x80 can be found inline in
+ * various programs and libraries.  It is also used by the vDSO's
+ * __kernel_vsyscall fallback for hardware that doesn't support a faster
+ * entry method.  Restarted 32-bit system calls also fall back to INT
+ * $0x80 regardless of what instruction was originally used to do the
+ * system call.
+ *
+ * This is considered a slow path.  It is not used by most libc
+ * implementations on modern hardware except during process startup.
  *
  * Arguments:
  * eax  system call number
@@ -249,22 +290,14 @@ END(entry_SYSCALL_compat)
  * edx  arg3
  * esi  arg4
  * edi  arg5
- * ebp  arg6	(note: not saved in the stack frame, should not be touched)
- *
- * Notes:
- * Uses the same stack frame as the x86-64 version.
- * All registers except eax must be saved (but ptrace may violate that).
- * Arguments are zero extended. For system calls that want sign extension and
- * take long arguments a wrapper is needed. Most calls can just be called
- * directly.
- * Assumes it is only called from user space and entered with interrupts off.
+ * ebp  arg6
  */
-
 ENTRY(entry_INT80_compat)
 	/*
 	 * Interrupts are off on entry.
 	 */
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
+	ASM_CLAC			/* Do this early to minimize exposure */
 	SWAPGS
 
 	/*
@@ -303,7 +336,7 @@ ENTRY(entry_INT80_compat)
 	TRACE_IRQS_OFF
 
 	movq	%rsp, %rdi
-	call	do_syscall_32_irqs_off
+	call	do_int80_syscall_32
 .Lsyscall_32_done:
 
 	/* Go back to user mode. */
diff --git a/arch/x86/entry/syscall_32.c b/arch/x86/entry/syscall_32.c
index 9a6649857106..8f895ee13a1c 100644
--- a/arch/x86/entry/syscall_32.c
+++ b/arch/x86/entry/syscall_32.c
@@ -6,17 +6,11 @@
 #include <asm/asm-offsets.h>
 #include <asm/syscall.h>
 
-#ifdef CONFIG_IA32_EMULATION
-#define SYM(sym, compat) compat
-#else
-#define SYM(sym, compat) sym
-#endif
-
-#define __SYSCALL_I386(nr, sym, compat) extern asmlinkage long SYM(sym, compat)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
+#define __SYSCALL_I386(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
 #include <asm/syscalls_32.h>
 #undef __SYSCALL_I386
 
-#define __SYSCALL_I386(nr, sym, compat) [nr] = SYM(sym, compat),
+#define __SYSCALL_I386(nr, sym, qual) [nr] = sym,
 
 extern asmlinkage long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
 
diff --git a/arch/x86/entry/syscall_64.c b/arch/x86/entry/syscall_64.c
index 41283d22be7a..9dbc5abb6162 100644
--- a/arch/x86/entry/syscall_64.c
+++ b/arch/x86/entry/syscall_64.c
@@ -6,19 +6,14 @@
 #include <asm/asm-offsets.h>
 #include <asm/syscall.h>
 
-#define __SYSCALL_COMMON(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
+#define __SYSCALL_64_QUAL_(sym) sym
+#define __SYSCALL_64_QUAL_ptregs(sym) ptregs_##sym
 
-#ifdef CONFIG_X86_X32_ABI
-# define __SYSCALL_X32(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
-#else
-# define __SYSCALL_X32(nr, sym, compat) /* nothing */
-#endif
-
-#define __SYSCALL_64(nr, sym, compat) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
+#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long __SYSCALL_64_QUAL_##qual(sym)(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
 #include <asm/syscalls_64.h>
 #undef __SYSCALL_64
 
-#define __SYSCALL_64(nr, sym, compat) [nr] = sym,
+#define __SYSCALL_64(nr, sym, qual) [nr] = __SYSCALL_64_QUAL_##qual(sym),
 
 extern long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
 
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index f17705e1332c..b30dd8154cc2 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -383,3 +383,6 @@
 374	i386	userfaultfd		sys_userfaultfd
 375	i386	membarrier		sys_membarrier
 376	i386	mlock2			sys_mlock2
+377	i386	copy_file_range		sys_copy_file_range
+378	i386	preadv2			sys_preadv2
+379	i386	pwritev2		sys_pwritev2
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 314a90bfc09c..cac6d17ce5db 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -21,7 +21,7 @@
 12	common	brk			sys_brk
 13	64	rt_sigaction		sys_rt_sigaction
 14	common	rt_sigprocmask		sys_rt_sigprocmask
-15	64	rt_sigreturn		stub_rt_sigreturn
+15	64	rt_sigreturn		sys_rt_sigreturn/ptregs
 16	64	ioctl			sys_ioctl
 17	common	pread64			sys_pread64
 18	common	pwrite64		sys_pwrite64
@@ -62,10 +62,10 @@
 53	common	socketpair		sys_socketpair
 54	64	setsockopt		sys_setsockopt
 55	64	getsockopt		sys_getsockopt
-56	common	clone			stub_clone
-57	common	fork			stub_fork
-58	common	vfork			stub_vfork
-59	64	execve			stub_execve
+56	common	clone			sys_clone/ptregs
+57	common	fork			sys_fork/ptregs
+58	common	vfork			sys_vfork/ptregs
+59	64	execve			sys_execve/ptregs
 60	common	exit			sys_exit
 61	common	wait4			sys_wait4
 62	common	kill			sys_kill
@@ -178,7 +178,7 @@
 169	common	reboot			sys_reboot
 170	common	sethostname		sys_sethostname
 171	common	setdomainname		sys_setdomainname
-172	common	iopl			sys_iopl
+172	common	iopl			sys_iopl/ptregs
 173	common	ioperm			sys_ioperm
 174	64	create_module
 175	common	init_module		sys_init_module
@@ -328,24 +328,27 @@
 319	common	memfd_create		sys_memfd_create
 320	common	kexec_file_load		sys_kexec_file_load
 321	common	bpf			sys_bpf
-322	64	execveat		stub_execveat
+322	64	execveat		sys_execveat/ptregs
 323	common	userfaultfd		sys_userfaultfd
 324	common	membarrier		sys_membarrier
 325	common	mlock2			sys_mlock2
+326	common	copy_file_range		sys_copy_file_range
+327	64	preadv2			sys_preadv2
+328	64	pwritev2		sys_pwritev2
 
 #
 # x32-specific system call numbers start at 512 to avoid cache impact
 # for native 64-bit operation.
 #
 512	x32	rt_sigaction		compat_sys_rt_sigaction
-513	x32	rt_sigreturn		stub_x32_rt_sigreturn
+513	x32	rt_sigreturn		sys32_x32_rt_sigreturn
 514	x32	ioctl			compat_sys_ioctl
 515	x32	readv			compat_sys_readv
 516	x32	writev			compat_sys_writev
 517	x32	recvfrom		compat_sys_recvfrom
 518	x32	sendmsg			compat_sys_sendmsg
 519	x32	recvmsg			compat_sys_recvmsg
-520	x32	execve			stub_x32_execve
+520	x32	execve			compat_sys_execve/ptregs
 521	x32	ptrace			compat_sys_ptrace
 522	x32	rt_sigpending		compat_sys_rt_sigpending
 523	x32	rt_sigtimedwait		compat_sys_rt_sigtimedwait
@@ -370,4 +373,4 @@
 542	x32	getsockopt		compat_sys_getsockopt
 543	x32	io_setup		compat_sys_io_setup
 544	x32	io_submit		compat_sys_io_submit
-545	x32	execveat		stub_x32_execveat
+545	x32	execveat		compat_sys_execveat/ptregs
diff --git a/arch/x86/entry/syscalls/syscalltbl.sh b/arch/x86/entry/syscalls/syscalltbl.sh
index 0e7f8ec071e7..cd3d3015d7df 100644
--- a/arch/x86/entry/syscalls/syscalltbl.sh
+++ b/arch/x86/entry/syscalls/syscalltbl.sh
@@ -3,13 +3,63 @@
 in="$1"
 out="$2"
 
+syscall_macro() {
+    abi="$1"
+    nr="$2"
+    entry="$3"
+
+    # Entry can be either just a function name or "function/qualifier"
+    real_entry="${entry%%/*}"
+    qualifier="${entry:${#real_entry}}"		# Strip the function name
+    qualifier="${qualifier:1}"			# Strip the slash, if any
+
+    echo "__SYSCALL_${abi}($nr, $real_entry, $qualifier)"
+}
+
+emit() {
+    abi="$1"
+    nr="$2"
+    entry="$3"
+    compat="$4"
+
+    if [ "$abi" == "64" -a -n "$compat" ]; then
+	echo "a compat entry for a 64-bit syscall makes no sense" >&2
+	exit 1
+    fi
+
+    if [ -z "$compat" ]; then
+	if [ -n "$entry" ]; then
+	    syscall_macro "$abi" "$nr" "$entry"
+	fi
+    else
+	echo "#ifdef CONFIG_X86_32"
+	if [ -n "$entry" ]; then
+	    syscall_macro "$abi" "$nr" "$entry"
+	fi
+	echo "#else"
+	syscall_macro "$abi" "$nr" "$compat"
+	echo "#endif"
+    fi
+}
+
 grep '^[0-9]' "$in" | sort -n | (
     while read nr abi name entry compat; do
 	abi=`echo "$abi" | tr '[a-z]' '[A-Z]'`
-	if [ -n "$compat" ]; then
-	    echo "__SYSCALL_${abi}($nr, $entry, $compat)"
-	elif [ -n "$entry" ]; then
-	    echo "__SYSCALL_${abi}($nr, $entry, $entry)"
+	if [ "$abi" == "COMMON" -o "$abi" == "64" ]; then
+	    # COMMON is the same as 64, except that we don't expect X32
+	    # programs to use it.  Our expectation has nothing to do with
+	    # any generated code, so treat them the same.
+	    emit 64 "$nr" "$entry" "$compat"
+	elif [ "$abi" == "X32" ]; then
+	    # X32 is equivalent to 64 on an X32-compatible kernel.
+	    echo "#ifdef CONFIG_X86_X32_ABI"
+	    emit 64 "$nr" "$entry" "$compat"
+	    echo "#endif"
+	elif [ "$abi" == "I386" ]; then
+	    emit "$abi" "$nr" "$entry" "$compat"
+	else
+	    echo "Unknown abi $abi" >&2
+	    exit 1
 	fi
     done
 ) > "$out"
diff --git a/arch/x86/entry/thunk_64.S b/arch/x86/entry/thunk_64.S
index efb2b932b748..98df1fa8825c 100644
--- a/arch/x86/entry/thunk_64.S
+++ b/arch/x86/entry/thunk_64.S
@@ -8,11 +8,14 @@
 #include <linux/linkage.h>
 #include "calling.h"
 #include <asm/asm.h>
+#include <asm/frame.h>
 
 	/* rdi:	arg1 ... normal C conventions. rax is saved/restored. */
 	.macro THUNK name, func, put_ret_addr_in_rdi=0
 	.globl \name
+	.type \name, @function
 \name:
+	FRAME_BEGIN
 
 	/* this one pushes 9 elems, the next one would be %rIP */
 	pushq %rdi
@@ -62,6 +65,7 @@ restore:
 	popq %rdx
 	popq %rsi
 	popq %rdi
+	FRAME_END
 	ret
 	_ASM_NOKPROBE(restore)
 #endif
diff --git a/arch/x86/entry/vdso/Makefile b/arch/x86/entry/vdso/Makefile
index 265c0ed68118..6874da5f67fc 100644
--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -3,7 +3,12 @@
 #
 
 KBUILD_CFLAGS += $(DISABLE_LTO)
-KASAN_SANITIZE := n
+KASAN_SANITIZE			:= n
+UBSAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT		:= n
 
 VDSO64-$(CONFIG_X86_64)		:= y
 VDSOX32-$(CONFIG_X86_X32_ABI)	:= y
@@ -15,6 +20,7 @@ vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o
 
 # files to link into kernel
 obj-y				+= vma.o
+OBJECT_FILES_NON_STANDARD_vma.o	:= n
 
 # vDSO images to build
 vdso_img-$(VDSO64-y)		+= 64
diff --git a/arch/x86/entry/vdso/vclock_gettime.c b/arch/x86/entry/vdso/vclock_gettime.c
index ca94fa649251..03c3eb77bfce 100644
--- a/arch/x86/entry/vdso/vclock_gettime.c
+++ b/arch/x86/entry/vdso/vclock_gettime.c
@@ -17,8 +17,10 @@
 #include <asm/vvar.h>
 #include <asm/unistd.h>
 #include <asm/msr.h>
+#include <asm/pvclock.h>
 #include <linux/math64.h>
 #include <linux/time.h>
+#include <linux/kernel.h>
 
 #define gtod (&VVAR(vsyscall_gtod_data))
 
@@ -36,12 +38,12 @@ static notrace cycle_t vread_hpet(void)
 }
 #endif
 
-#ifndef BUILD_VDSO32
+#ifdef CONFIG_PARAVIRT_CLOCK
+extern u8 pvclock_page
+	__attribute__((visibility("hidden")));
+#endif
 
-#include <linux/kernel.h>
-#include <asm/vsyscall.h>
-#include <asm/fixmap.h>
-#include <asm/pvclock.h>
+#ifndef BUILD_VDSO32
 
 notrace static long vdso_fallback_gettime(long clock, struct timespec *ts)
 {
@@ -60,75 +62,6 @@ notrace static long vdso_fallback_gtod(struct timeval *tv, struct timezone *tz)
 	return ret;
 }
 
-#ifdef CONFIG_PARAVIRT_CLOCK
-
-static notrace const struct pvclock_vsyscall_time_info *get_pvti(int cpu)
-{
-	const struct pvclock_vsyscall_time_info *pvti_base;
-	int idx = cpu / (PAGE_SIZE/PVTI_SIZE);
-	int offset = cpu % (PAGE_SIZE/PVTI_SIZE);
-
-	BUG_ON(PVCLOCK_FIXMAP_BEGIN + idx > PVCLOCK_FIXMAP_END);
-
-	pvti_base = (struct pvclock_vsyscall_time_info *)
-		    __fix_to_virt(PVCLOCK_FIXMAP_BEGIN+idx);
-
-	return &pvti_base[offset];
-}
-
-static notrace cycle_t vread_pvclock(int *mode)
-{
-	const struct pvclock_vsyscall_time_info *pvti;
-	cycle_t ret;
-	u64 last;
-	u32 version;
-	u8 flags;
-	unsigned cpu, cpu1;
-
-
-	/*
-	 * Note: hypervisor must guarantee that:
-	 * 1. cpu ID number maps 1:1 to per-CPU pvclock time info.
-	 * 2. that per-CPU pvclock time info is updated if the
-	 *    underlying CPU changes.
-	 * 3. that version is increased whenever underlying CPU
-	 *    changes.
-	 *
-	 */
-	do {
-		cpu = __getcpu() & VGETCPU_CPU_MASK;
-		/* TODO: We can put vcpu id into higher bits of pvti.version.
-		 * This will save a couple of cycles by getting rid of
-		 * __getcpu() calls (Gleb).
-		 */
-
-		pvti = get_pvti(cpu);
-
-		version = __pvclock_read_cycles(&pvti->pvti, &ret, &flags);
-
-		/*
-		 * Test we're still on the cpu as well as the version.
-		 * We could have been migrated just after the first
-		 * vgetcpu but before fetching the version, so we
-		 * wouldn't notice a version change.
-		 */
-		cpu1 = __getcpu() & VGETCPU_CPU_MASK;
-	} while (unlikely(cpu != cpu1 ||
-			  (pvti->pvti.version & 1) ||
-			  pvti->pvti.version != version));
-
-	if (unlikely(!(flags & PVCLOCK_TSC_STABLE_BIT)))
-		*mode = VCLOCK_NONE;
-
-	/* refer to tsc.c read_tsc() comment for rationale */
-	last = gtod->cycle_last;
-
-	if (likely(ret >= last))
-		return ret;
-
-	return last;
-}
-#endif
 
 #else
 
@@ -162,15 +95,77 @@ notrace static long vdso_fallback_gtod(struct timeval *tv, struct timezone *tz)
 	return ret;
 }
 
+#endif
+
 #ifdef CONFIG_PARAVIRT_CLOCK
+static notrace const struct pvclock_vsyscall_time_info *get_pvti0(void)
+{
+	return (const struct pvclock_vsyscall_time_info *)&pvclock_page;
+}
 
 static notrace cycle_t vread_pvclock(int *mode)
 {
-	*mode = VCLOCK_NONE;
-	return 0;
-}
-#endif
+	const struct pvclock_vcpu_time_info *pvti = &get_pvti0()->pvti;
+	cycle_t ret;
+	u64 tsc, pvti_tsc;
+	u64 last, delta, pvti_system_time;
+	u32 version, pvti_tsc_to_system_mul, pvti_tsc_shift;
 
+	/*
+	 * Note: The kernel and hypervisor must guarantee that cpu ID
+	 * number maps 1:1 to per-CPU pvclock time info.
+	 *
+	 * Because the hypervisor is entirely unaware of guest userspace
+	 * preemption, it cannot guarantee that per-CPU pvclock time
+	 * info is updated if the underlying CPU changes or that that
+	 * version is increased whenever underlying CPU changes.
+	 *
+	 * On KVM, we are guaranteed that pvti updates for any vCPU are
+	 * atomic as seen by *all* vCPUs.  This is an even stronger
+	 * guarantee than we get with a normal seqlock.
+	 *
+	 * On Xen, we don't appear to have that guarantee, but Xen still
+	 * supplies a valid seqlock using the version field.
+	 *
+	 * We only do pvclock vdso timing at all if
+	 * PVCLOCK_TSC_STABLE_BIT is set, and we interpret that bit to
+	 * mean that all vCPUs have matching pvti and that the TSC is
+	 * synced, so we can just look at vCPU 0's pvti.
+	 */
+
+	do {
+		version = pvti->version;
+
+		smp_rmb();
+
+		if (unlikely(!(pvti->flags & PVCLOCK_TSC_STABLE_BIT))) {
+			*mode = VCLOCK_NONE;
+			return 0;
+		}
+
+		tsc = rdtsc_ordered();
+		pvti_tsc_to_system_mul = pvti->tsc_to_system_mul;
+		pvti_tsc_shift = pvti->tsc_shift;
+		pvti_system_time = pvti->system_time;
+		pvti_tsc = pvti->tsc_timestamp;
+
+		/* Make sure that the version double-check is last. */
+		smp_rmb();
+	} while (unlikely((version & 1) || version != pvti->version));
+
+	delta = tsc - pvti_tsc;
+	ret = pvti_system_time +
+		pvclock_scale_delta(delta, pvti_tsc_to_system_mul,
+				    pvti_tsc_shift);
+
+	/* refer to vread_tsc() comment for rationale */
+	last = gtod->cycle_last;
+
+	if (likely(ret >= last))
+		return ret;
+
+	return last;
+}
 #endif
 
 notrace static cycle_t vread_tsc(void)
@@ -183,7 +178,7 @@ notrace static cycle_t vread_tsc(void)
 
 	/*
 	 * GCC likes to generate cmov here, but this branch is extremely
-	 * predictable (it's just a funciton of time and the likely is
+	 * predictable (it's just a function of time and the likely is
 	 * very likely) and there's a data dependence, so force GCC
 	 * to generate a branch instead.  I don't barrier() because
 	 * we don't actually need a barrier, and if this function
diff --git a/arch/x86/entry/vdso/vdso-layout.lds.S b/arch/x86/entry/vdso/vdso-layout.lds.S
index de2c921025f5..4158acc17df0 100644
--- a/arch/x86/entry/vdso/vdso-layout.lds.S
+++ b/arch/x86/entry/vdso/vdso-layout.lds.S
@@ -25,7 +25,7 @@ SECTIONS
 	 * segment.
 	 */
 
-	vvar_start = . - 2 * PAGE_SIZE;
+	vvar_start = . - 3 * PAGE_SIZE;
 	vvar_page = vvar_start;
 
 	/* Place all vvars at the offsets in asm/vvar.h. */
@@ -36,6 +36,7 @@ SECTIONS
 #undef EMIT_VVAR
 
 	hpet_page = vvar_start + PAGE_SIZE;
+	pvclock_page = vvar_start + 2 * PAGE_SIZE;
 
 	. = SIZEOF_HEADERS;
 
diff --git a/arch/x86/entry/vdso/vdso2c.c b/arch/x86/entry/vdso/vdso2c.c
index 785d9922b106..491020b2826d 100644
--- a/arch/x86/entry/vdso/vdso2c.c
+++ b/arch/x86/entry/vdso/vdso2c.c
@@ -73,6 +73,7 @@ enum {
 	sym_vvar_start,
 	sym_vvar_page,
 	sym_hpet_page,
+	sym_pvclock_page,
 	sym_VDSO_FAKE_SECTION_TABLE_START,
 	sym_VDSO_FAKE_SECTION_TABLE_END,
 };
@@ -80,6 +81,7 @@ enum {
 const int special_pages[] = {
 	sym_vvar_page,
 	sym_hpet_page,
+	sym_pvclock_page,
 };
 
 struct vdso_sym {
@@ -91,6 +93,7 @@ struct vdso_sym required_syms[] = {
 	[sym_vvar_start] = {"vvar_start", true},
 	[sym_vvar_page] = {"vvar_page", true},
 	[sym_hpet_page] = {"hpet_page", true},
+	[sym_pvclock_page] = {"pvclock_page", true},
 	[sym_VDSO_FAKE_SECTION_TABLE_START] = {
 		"VDSO_FAKE_SECTION_TABLE_START", false
 	},
diff --git a/arch/x86/entry/vdso/vdso2c.h b/arch/x86/entry/vdso/vdso2c.h
index 0224987556ce..63a03bb91497 100644
--- a/arch/x86/entry/vdso/vdso2c.h
+++ b/arch/x86/entry/vdso/vdso2c.h
@@ -140,7 +140,7 @@ static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
 	fprintf(outfile, "#include <asm/vdso.h>\n");
 	fprintf(outfile, "\n");
 	fprintf(outfile,
-		"static unsigned char raw_data[%lu] __page_aligned_data = {",
+		"static unsigned char raw_data[%lu] __ro_after_init __aligned(PAGE_SIZE) = {",
 		mapping_size);
 	for (j = 0; j < stripped_len; j++) {
 		if (j % 10 == 0)
@@ -150,16 +150,9 @@ static void BITSFUNC(go)(void *raw_addr, size_t raw_len,
 	}
 	fprintf(outfile, "\n};\n\n");
 
-	fprintf(outfile, "static struct page *pages[%lu];\n\n",
-		mapping_size / 4096);
-
 	fprintf(outfile, "const struct vdso_image %s = {\n", name);
 	fprintf(outfile, "\t.data = raw_data,\n");
 	fprintf(outfile, "\t.size = %lu,\n", mapping_size);
-	fprintf(outfile, "\t.text_mapping = {\n");
-	fprintf(outfile, "\t\t.name = \"[vdso]\",\n");
-	fprintf(outfile, "\t\t.pages = pages,\n");
-	fprintf(outfile, "\t},\n");
 	if (alt_sec) {
 		fprintf(outfile, "\t.alt = %lu,\n",
 			(unsigned long)GET_LE(&alt_sec->sh_offset));
diff --git a/arch/x86/entry/vdso/vdso32-setup.c b/arch/x86/entry/vdso/vdso32-setup.c
index 08a317a9ae4b..7853b53959cd 100644
--- a/arch/x86/entry/vdso/vdso32-setup.c
+++ b/arch/x86/entry/vdso/vdso32-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/mm_types.h>
 
-#include <asm/cpufeature.h>
 #include <asm/processor.h>
 #include <asm/vdso.h>
 
diff --git a/arch/x86/entry/vdso/vdso32/system_call.S b/arch/x86/entry/vdso/vdso32/system_call.S
index 93bd8452383f..0109ac6cb79c 100644
--- a/arch/x86/entry/vdso/vdso32/system_call.S
+++ b/arch/x86/entry/vdso/vdso32/system_call.S
@@ -1,9 +1,9 @@
 /*
- * Code for the vDSO.  This version uses the old int $0x80 method.
+ * AT_SYSINFO entry point
 */
 
 #include <asm/dwarf2.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 
 /*
@@ -21,35 +21,67 @@ __kernel_vsyscall:
 	/*
 	 * Reshuffle regs so that all of any of the entry instructions
 	 * will preserve enough state.
+	 *
+	 * A really nice entry sequence would be:
+	 *  pushl %edx
+	 *  pushl %ecx
+	 *  movl  %esp, %ecx
+	 *
+	 * Unfortunately, naughty Android versions between July and December
+	 * 2015 actually hardcode the traditional Linux SYSENTER entry
+	 * sequence.  That is severely broken for a number of reasons (ask
+	 * anyone with an AMD CPU, for example).  Nonetheless, we try to keep
+	 * it working approximately as well as it ever worked.
+	 *
+	 * This link may eludicate some of the history:
+	 *   https://android-review.googlesource.com/#/q/Iac3295376d61ef83e713ac9b528f3b50aa780cd7
+	 * personally, I find it hard to understand what's going on there.
+	 *
+	 * Note to future user developers: DO NOT USE SYSENTER IN YOUR CODE.
+	 * Execute an indirect call to the address in the AT_SYSINFO auxv
+	 * entry.  That is the ONLY correct way to make a fast 32-bit system
+	 * call on Linux.  (Open-coding int $0x80 is also fine, but it's
+	 * slow.)
 	 */
+	pushl	%ecx
+	CFI_ADJUST_CFA_OFFSET	4
+	CFI_REL_OFFSET		ecx, 0
 	pushl	%edx
 	CFI_ADJUST_CFA_OFFSET	4
 	CFI_REL_OFFSET		edx, 0
-	pushl	%ecx
+	pushl	%ebp
 	CFI_ADJUST_CFA_OFFSET	4
-	CFI_REL_OFFSET		ecx, 0
-	movl	%esp, %ecx
+	CFI_REL_OFFSET		ebp, 0
+
+	#define SYSENTER_SEQUENCE	"movl %esp, %ebp; sysenter"
+	#define SYSCALL_SEQUENCE	"movl %ecx, %ebp; syscall"
 
 #ifdef CONFIG_X86_64
 	/* If SYSENTER (Intel) or SYSCALL32 (AMD) is available, use it. */
-	ALTERNATIVE_2 "", "sysenter", X86_FEATURE_SYSENTER32, \
-	                  "syscall",  X86_FEATURE_SYSCALL32
+	ALTERNATIVE_2 "", SYSENTER_SEQUENCE, X86_FEATURE_SYSENTER32, \
+	                  SYSCALL_SEQUENCE,  X86_FEATURE_SYSCALL32
 #else
-	ALTERNATIVE "", "sysenter", X86_FEATURE_SEP
+	ALTERNATIVE "", SYSENTER_SEQUENCE, X86_FEATURE_SEP
 #endif
 
 	/* Enter using int $0x80 */
-	movl	(%esp), %ecx
 	int	$0x80
 GLOBAL(int80_landing_pad)
 
-	/* Restore ECX and EDX in case they were clobbered. */
-	popl	%ecx
-	CFI_RESTORE		ecx
+	/*
+	 * Restore EDX and ECX in case they were clobbered.  EBP is not
+	 * clobbered (the kernel restores it), but it's cleaner and
+	 * probably faster to pop it than to adjust ESP using addl.
+	 */
+	popl	%ebp
+	CFI_RESTORE		ebp
 	CFI_ADJUST_CFA_OFFSET	-4
 	popl	%edx
 	CFI_RESTORE		edx
 	CFI_ADJUST_CFA_OFFSET	-4
+	popl	%ecx
+	CFI_RESTORE		ecx
+	CFI_ADJUST_CFA_OFFSET	-4
 	ret
 	CFI_ENDPROC
 
diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index 64df47148160..10f704584922 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
@@ -12,6 +12,7 @@
 #include <linux/random.h>
 #include <linux/elf.h>
 #include <linux/cpu.h>
+#include <asm/pvclock.h>
 #include <asm/vgtod.h>
 #include <asm/proto.h>
 #include <asm/vdso.h>
@@ -19,6 +20,7 @@
 #include <asm/page.h>
 #include <asm/hpet.h>
 #include <asm/desc.h>
+#include <asm/cpufeature.h>
 
 #if defined(CONFIG_X86_64)
 unsigned int __read_mostly vdso64_enabled = 1;
@@ -26,13 +28,7 @@ unsigned int __read_mostly vdso64_enabled = 1;
 
 void __init init_vdso_image(const struct vdso_image *image)
 {
-	int i;
-	int npages = (image->size) / PAGE_SIZE;
-
 	BUG_ON(image->size % PAGE_SIZE != 0);
-	for (i = 0; i < npages; i++)
-		image->text_mapping.pages[i] =
-			virt_to_page(image->data + i*PAGE_SIZE);
 
 	apply_alternatives((struct alt_instr *)(image->data + image->alt),
 			   (struct alt_instr *)(image->data + image->alt +
@@ -89,16 +85,86 @@ static unsigned long vdso_addr(unsigned long start, unsigned len)
 #endif
 }
 
+static int vdso_fault(const struct vm_special_mapping *sm,
+		      struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	const struct vdso_image *image = vma->vm_mm->context.vdso_image;
+
+	if (!image || (vmf->pgoff << PAGE_SHIFT) >= image->size)
+		return VM_FAULT_SIGBUS;
+
+	vmf->page = virt_to_page(image->data + (vmf->pgoff << PAGE_SHIFT));
+	get_page(vmf->page);
+	return 0;
+}
+
+static const struct vm_special_mapping text_mapping = {
+	.name = "[vdso]",
+	.fault = vdso_fault,
+};
+
+static int vvar_fault(const struct vm_special_mapping *sm,
+		      struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	const struct vdso_image *image = vma->vm_mm->context.vdso_image;
+	long sym_offset;
+	int ret = -EFAULT;
+
+	if (!image)
+		return VM_FAULT_SIGBUS;
+
+	sym_offset = (long)(vmf->pgoff << PAGE_SHIFT) +
+		image->sym_vvar_start;
+
+	/*
+	 * Sanity check: a symbol offset of zero means that the page
+	 * does not exist for this vdso image, not that the page is at
+	 * offset zero relative to the text mapping.  This should be
+	 * impossible here, because sym_offset should only be zero for
+	 * the page past the end of the vvar mapping.
+	 */
+	if (sym_offset == 0)
+		return VM_FAULT_SIGBUS;
+
+	if (sym_offset == image->sym_vvar_page) {
+		ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address,
+				    __pa_symbol(&__vvar_page) >> PAGE_SHIFT);
+	} else if (sym_offset == image->sym_hpet_page) {
+#ifdef CONFIG_HPET_TIMER
+		if (hpet_address && vclock_was_used(VCLOCK_HPET)) {
+			ret = vm_insert_pfn_prot(
+				vma,
+				(unsigned long)vmf->virtual_address,
+				hpet_address >> PAGE_SHIFT,
+				pgprot_noncached(PAGE_READONLY));
+		}
+#endif
+	} else if (sym_offset == image->sym_pvclock_page) {
+		struct pvclock_vsyscall_time_info *pvti =
+			pvclock_pvti_cpu0_va();
+		if (pvti && vclock_was_used(VCLOCK_PVCLOCK)) {
+			ret = vm_insert_pfn(
+				vma,
+				(unsigned long)vmf->virtual_address,
+				__pa(pvti) >> PAGE_SHIFT);
+		}
+	}
+
+	if (ret == 0 || ret == -EBUSY)
+		return VM_FAULT_NOPAGE;
+
+	return VM_FAULT_SIGBUS;
+}
+
 static int map_vdso(const struct vdso_image *image, bool calculate_addr)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long addr, text_start;
 	int ret = 0;
-	static struct page *no_pages[] = {NULL};
-	static struct vm_special_mapping vvar_mapping = {
+	static const struct vm_special_mapping vvar_mapping = {
 		.name = "[vvar]",
-		.pages = no_pages,
+		.fault = vvar_fault,
 	};
 
 	if (calculate_addr) {
@@ -119,6 +185,7 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
 
 	text_start = addr - image->sym_vvar_start;
 	current->mm->context.vdso = (void __user *)text_start;
+	current->mm->context.vdso_image = image;
 
 	/*
 	 * MAYWRITE to allow gdb to COW and set breakpoints
@@ -128,7 +195,7 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
 				       image->size,
 				       VM_READ|VM_EXEC|
 				       VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
-				       &image->text_mapping);
+				       &text_mapping);
 
 	if (IS_ERR(vma)) {
 		ret = PTR_ERR(vma);
@@ -138,7 +205,8 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
 	vma = _install_special_mapping(mm,
 				       addr,
 				       -image->sym_vvar_start,
-				       VM_READ|VM_MAYREAD,
+				       VM_READ|VM_MAYREAD|VM_IO|VM_DONTDUMP|
+				       VM_PFNMAP,
 				       &vvar_mapping);
 
 	if (IS_ERR(vma)) {
@@ -146,29 +214,6 @@ static int map_vdso(const struct vdso_image *image, bool calculate_addr)
 		goto up_fail;
 	}
 
-	if (image->sym_vvar_page)
-		ret = remap_pfn_range(vma,
-				      text_start + image->sym_vvar_page,
-				      __pa_symbol(&__vvar_page) >> PAGE_SHIFT,
-				      PAGE_SIZE,
-				      PAGE_READONLY);
-
-	if (ret)
-		goto up_fail;
-
-#ifdef CONFIG_HPET_TIMER
-	if (hpet_address && image->sym_hpet_page) {
-		ret = io_remap_pfn_range(vma,
-			text_start + image->sym_hpet_page,
-			hpet_address >> PAGE_SHIFT,
-			PAGE_SIZE,
-			pgprot_noncached(PAGE_READONLY));
-
-		if (ret)
-			goto up_fail;
-	}
-#endif
-
 up_fail:
 	if (ret)
 		current->mm->context.vdso = NULL;
@@ -240,7 +285,7 @@ static void vgetcpu_cpu_init(void *arg)
 #ifdef CONFIG_NUMA
 	node = cpu_to_node(cpu);
 #endif
-	if (cpu_has(&cpu_data(cpu), X86_FEATURE_RDTSCP))
+	if (static_cpu_has(X86_FEATURE_RDTSCP))
 		write_rdtscp_aux((node << 12) | cpu);
 
 	/*
diff --git a/arch/x86/entry/vsyscall/vsyscall_gtod.c b/arch/x86/entry/vsyscall/vsyscall_gtod.c
index 51e330416995..0fb3a104ac62 100644
--- a/arch/x86/entry/vsyscall/vsyscall_gtod.c
+++ b/arch/x86/entry/vsyscall/vsyscall_gtod.c
@@ -16,6 +16,8 @@
 #include <asm/vgtod.h>
 #include <asm/vvar.h>
 
+int vclocks_used __read_mostly;
+
 DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data);
 
 void update_vsyscall_tz(void)
@@ -26,12 +28,17 @@ void update_vsyscall_tz(void)
 
 void update_vsyscall(struct timekeeper *tk)
 {
+	int vclock_mode = tk->tkr_mono.clock->archdata.vclock_mode;
 	struct vsyscall_gtod_data *vdata = &vsyscall_gtod_data;
 
+	/* Mark the new vclock used. */
+	BUILD_BUG_ON(VCLOCK_MAX >= 32);
+	WRITE_ONCE(vclocks_used, READ_ONCE(vclocks_used) | (1 << vclock_mode));
+
 	gtod_write_begin(vdata);
 
 	/* copy vsyscall data */
-	vdata->vclock_mode	= tk->tkr_mono.clock->archdata.vclock_mode;
+	vdata->vclock_mode	= vclock_mode;
 	vdata->cycle_last	= tk->tkr_mono.cycle_last;
 	vdata->mask		= tk->tkr_mono.mask;
 	vdata->mult		= tk->tkr_mono.mult;
diff --git a/arch/x86/events/Makefile b/arch/x86/events/Makefile
new file mode 100644
index 000000000000..f59618a39990
--- /dev/null
+++ b/arch/x86/events/Makefile
@@ -0,0 +1,14 @@
+obj-y			+= core.o
+
+obj-$(CONFIG_CPU_SUP_AMD)               += amd/core.o amd/uncore.o
+obj-$(CONFIG_PERF_EVENTS_AMD_POWER)	+= amd/power.o
+obj-$(CONFIG_X86_LOCAL_APIC)            += amd/ibs.o msr.o
+ifdef CONFIG_AMD_IOMMU
+obj-$(CONFIG_CPU_SUP_AMD)               += amd/iommu.o
+endif
+obj-$(CONFIG_CPU_SUP_INTEL)		+= intel/core.o intel/bts.o intel/cqm.o
+obj-$(CONFIG_CPU_SUP_INTEL)		+= intel/cstate.o intel/ds.o intel/knc.o 
+obj-$(CONFIG_CPU_SUP_INTEL)		+= intel/lbr.o intel/p4.o intel/p6.o intel/pt.o
+obj-$(CONFIG_CPU_SUP_INTEL)		+= intel/rapl.o msr.o
+obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE)	+= intel/uncore.o intel/uncore_nhmex.o
+obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE)	+= intel/uncore_snb.o intel/uncore_snbep.o
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/events/amd/core.c
index 1cee5d2d7ece..86a9bec18dab 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/events/amd/core.c
@@ -5,7 +5,7 @@
 #include <linux/slab.h>
 #include <asm/apicdef.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 static __initconst const u64 amd_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
@@ -18,7 +18,7 @@ static __initconst const u64 amd_hw_cache_event_ids
 		[ C(RESULT_MISS)   ] = 0x0141, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
+		[ C(RESULT_ACCESS) ] = 0,
 		[ C(RESULT_MISS)   ] = 0,
 	},
 	[ C(OP_PREFETCH) ] = {
@@ -160,7 +160,7 @@ static inline int amd_pmu_addr_offset(int index, bool eventsel)
 	if (offset)
 		return offset;
 
-	if (!cpu_has_perfctr_core)
+	if (!boot_cpu_has(X86_FEATURE_PERFCTR_CORE))
 		offset = index;
 	else
 		offset = index << 1;
@@ -369,7 +369,7 @@ static int amd_pmu_cpu_prepare(int cpu)
 
 	WARN_ON_ONCE(cpuc->amd_nb);
 
-	if (boot_cpu_data.x86_max_cores < 2)
+	if (!x86_pmu.amd_nb_constraints)
 		return NOTIFY_OK;
 
 	cpuc->amd_nb = amd_alloc_nb(cpu);
@@ -388,7 +388,7 @@ static void amd_pmu_cpu_starting(int cpu)
 
 	cpuc->perf_ctr_virt_mask = AMD64_EVENTSEL_HOSTONLY;
 
-	if (boot_cpu_data.x86_max_cores < 2)
+	if (!x86_pmu.amd_nb_constraints)
 		return;
 
 	nb_id = amd_get_nb_id(cpu);
@@ -414,7 +414,7 @@ static void amd_pmu_cpu_dead(int cpu)
 {
 	struct cpu_hw_events *cpuhw;
 
-	if (boot_cpu_data.x86_max_cores < 2)
+	if (!x86_pmu.amd_nb_constraints)
 		return;
 
 	cpuhw = &per_cpu(cpu_hw_events, cpu);
@@ -648,11 +648,13 @@ static __initconst const struct x86_pmu amd_pmu = {
 	.cpu_prepare		= amd_pmu_cpu_prepare,
 	.cpu_starting		= amd_pmu_cpu_starting,
 	.cpu_dead		= amd_pmu_cpu_dead,
+
+	.amd_nb_constraints	= 1,
 };
 
 static int __init amd_core_pmu_init(void)
 {
-	if (!cpu_has_perfctr_core)
+	if (!boot_cpu_has(X86_FEATURE_PERFCTR_CORE))
 		return 0;
 
 	switch (boot_cpu_data.x86) {
@@ -674,6 +676,11 @@ static int __init amd_core_pmu_init(void)
 	x86_pmu.eventsel	= MSR_F15H_PERF_CTL;
 	x86_pmu.perfctr		= MSR_F15H_PERF_CTR;
 	x86_pmu.num_counters	= AMD64_NUM_COUNTERS_CORE;
+	/*
+	 * AMD Core perfctr has separate MSRs for the NB events, see
+	 * the amd/uncore.c driver.
+	 */
+	x86_pmu.amd_nb_constraints = 0;
 
 	pr_cont("core perfctr, ");
 	return 0;
@@ -693,6 +700,14 @@ __init int amd_pmu_init(void)
 	if (ret)
 		return ret;
 
+	if (num_possible_cpus() == 1) {
+		/*
+		 * No point in allocating data structures to serialize
+		 * against other CPUs, when there is only the one CPU.
+		 */
+		x86_pmu.amd_nb_constraints = 0;
+	}
+
 	/* Events are common for all AMDs */
 	memcpy(hw_cache_event_ids, amd_hw_cache_event_ids,
 	       sizeof(hw_cache_event_ids));
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/events/amd/ibs.c
index 989d3c215d2b..feb90f6730e8 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -14,7 +14,7 @@
 
 #include <asm/apic.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 static u32 ibs_caps;
 
@@ -28,10 +28,46 @@ static u32 ibs_caps;
 #define IBS_FETCH_CONFIG_MASK	(IBS_FETCH_RAND_EN | IBS_FETCH_MAX_CNT)
 #define IBS_OP_CONFIG_MASK	IBS_OP_MAX_CNT
 
+
+/*
+ * IBS states:
+ *
+ * ENABLED; tracks the pmu::add(), pmu::del() state, when set the counter is taken
+ * and any further add()s must fail.
+ *
+ * STARTED/STOPPING/STOPPED; deal with pmu::start(), pmu::stop() state but are
+ * complicated by the fact that the IBS hardware can send late NMIs (ie. after
+ * we've cleared the EN bit).
+ *
+ * In order to consume these late NMIs we have the STOPPED state, any NMI that
+ * happens after we've cleared the EN state will clear this bit and report the
+ * NMI handled (this is fundamentally racy in the face or multiple NMI sources,
+ * someone else can consume our BIT and our NMI will go unhandled).
+ *
+ * And since we cannot set/clear this separate bit together with the EN bit,
+ * there are races; if we cleared STARTED early, an NMI could land in
+ * between clearing STARTED and clearing the EN bit (in fact multiple NMIs
+ * could happen if the period is small enough), and consume our STOPPED bit
+ * and trigger streams of unhandled NMIs.
+ *
+ * If, however, we clear STARTED late, an NMI can hit between clearing the
+ * EN bit and clearing STARTED, still see STARTED set and process the event.
+ * If this event will have the VALID bit clear, we bail properly, but this
+ * is not a given. With VALID set we can end up calling pmu::stop() again
+ * (the throttle logic) and trigger the WARNs in there.
+ *
+ * So what we do is set STOPPING before clearing EN to avoid the pmu::stop()
+ * nesting, and clear STARTED late, so that we have a well defined state over
+ * the clearing of the EN bit.
+ *
+ * XXX: we could probably be using !atomic bitops for all this.
+ */
+
 enum ibs_states {
 	IBS_ENABLED	= 0,
 	IBS_STARTED	= 1,
 	IBS_STOPPING	= 2,
+	IBS_STOPPED	= 3,
 
 	IBS_MAX_STATES,
 };
@@ -376,7 +412,12 @@ static void perf_ibs_start(struct perf_event *event, int flags)
 	hwc->state = 0;
 
 	perf_ibs_set_period(perf_ibs, hwc, &period);
-	set_bit(IBS_STARTED, pcpu->state);
+	/*
+	 * Set STARTED before enabling the hardware, such that a subsequent NMI
+	 * must observe it.
+	 */
+	set_bit(IBS_STARTED,    pcpu->state);
+	clear_bit(IBS_STOPPING, pcpu->state);
 	perf_ibs_enable_event(perf_ibs, hwc, period >> 4);
 
 	perf_event_update_userpage(event);
@@ -390,7 +431,10 @@ static void perf_ibs_stop(struct perf_event *event, int flags)
 	u64 config;
 	int stopping;
 
-	stopping = test_and_clear_bit(IBS_STARTED, pcpu->state);
+	if (test_and_set_bit(IBS_STOPPING, pcpu->state))
+		return;
+
+	stopping = test_bit(IBS_STARTED, pcpu->state);
 
 	if (!stopping && (hwc->state & PERF_HES_UPTODATE))
 		return;
@@ -398,8 +442,24 @@ static void perf_ibs_stop(struct perf_event *event, int flags)
 	rdmsrl(hwc->config_base, config);
 
 	if (stopping) {
-		set_bit(IBS_STOPPING, pcpu->state);
+		/*
+		 * Set STOPPED before disabling the hardware, such that it
+		 * must be visible to NMIs the moment we clear the EN bit,
+		 * at which point we can generate an !VALID sample which
+		 * we need to consume.
+		 */
+		set_bit(IBS_STOPPED, pcpu->state);
 		perf_ibs_disable_event(perf_ibs, hwc, config);
+		/*
+		 * Clear STARTED after disabling the hardware; if it were
+		 * cleared before an NMI hitting after the clear but before
+		 * clearing the EN bit might think it a spurious NMI and not
+		 * handle it.
+		 *
+		 * Clearing it after, however, creates the problem of the NMI
+		 * handler seeing STARTED but not having a valid sample.
+		 */
+		clear_bit(IBS_STARTED, pcpu->state);
 		WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
 		hwc->state |= PERF_HES_STOPPED;
 	}
@@ -527,20 +587,24 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
 	u64 *buf, *config, period;
 
 	if (!test_bit(IBS_STARTED, pcpu->state)) {
+fail:
 		/*
 		 * Catch spurious interrupts after stopping IBS: After
 		 * disabling IBS there could be still incoming NMIs
 		 * with samples that even have the valid bit cleared.
 		 * Mark all this NMIs as handled.
 		 */
-		return test_and_clear_bit(IBS_STOPPING, pcpu->state) ? 1 : 0;
+		if (test_and_clear_bit(IBS_STOPPED, pcpu->state))
+			return 1;
+
+		return 0;
 	}
 
 	msr = hwc->config_base;
 	buf = ibs_data.regs;
 	rdmsrl(msr, *buf);
 	if (!(*buf++ & perf_ibs->valid_mask))
-		return 0;
+		goto fail;
 
 	config = &ibs_data.regs[0];
 	perf_ibs_event_update(perf_ibs, event, config);
@@ -599,7 +663,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
 	throttle = perf_event_overflow(event, &data, &regs);
 out:
 	if (throttle)
-		perf_ibs_disable_event(perf_ibs, hwc, *config);
+		perf_ibs_stop(event, 0);
 	else
 		perf_ibs_enable_event(perf_ibs, hwc, period >> 4);
 
@@ -611,6 +675,7 @@ out:
 static int
 perf_ibs_nmi_handler(unsigned int cmd, struct pt_regs *regs)
 {
+	u64 stamp = sched_clock();
 	int handled = 0;
 
 	handled += perf_ibs_handle_irq(&perf_ibs_fetch, regs);
@@ -619,6 +684,8 @@ perf_ibs_nmi_handler(unsigned int cmd, struct pt_regs *regs)
 	if (handled)
 		inc_irq_stat(apic_perf_irqs);
 
+	perf_sample_event_took(sched_clock() - stamp);
+
 	return handled;
 }
 NOKPROBE_SYMBOL(perf_ibs_nmi_handler);
@@ -670,7 +737,7 @@ static __init int perf_event_ibs_init(void)
 	perf_ibs_pmu_init(&perf_ibs_op, "ibs_op");
 
 	register_nmi_handler(NMI_LOCAL, perf_ibs_nmi_handler, 0, "perf_ibs");
-	printk(KERN_INFO "perf: AMD IBS detected (0x%08x)\n", ibs_caps);
+	pr_info("perf: AMD IBS detected (0x%08x)\n", ibs_caps);
 
 	return 0;
 }
@@ -774,14 +841,14 @@ static int setup_ibs_ctl(int ibs_eilvt_off)
 		pci_read_config_dword(cpu_cfg, IBSCTL, &value);
 		if (value != (ibs_eilvt_off | IBSCTL_LVT_OFFSET_VALID)) {
 			pci_dev_put(cpu_cfg);
-			printk(KERN_DEBUG "Failed to setup IBS LVT offset, "
-			       "IBSCTL = 0x%08x\n", value);
+			pr_debug("Failed to setup IBS LVT offset, IBSCTL = 0x%08x\n",
+				 value);
 			return -EINVAL;
 		}
 	} while (1);
 
 	if (!nodes) {
-		printk(KERN_DEBUG "No CPU node configured for IBS\n");
+		pr_debug("No CPU node configured for IBS\n");
 		return -ENODEV;
 	}
 
@@ -810,7 +877,7 @@ static void force_ibs_eilvt_setup(void)
 	preempt_enable();
 
 	if (offset == APIC_EILVT_NR_MAX) {
-		printk(KERN_DEBUG "No EILVT entry available\n");
+		pr_debug("No EILVT entry available\n");
 		return;
 	}
 
diff --git a/arch/x86/kernel/cpu/perf_event_amd_iommu.c b/arch/x86/events/amd/iommu.c
index 97242a9242bd..40625ca7a190 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_iommu.c
+++ b/arch/x86/events/amd/iommu.c
@@ -16,8 +16,8 @@
 #include <linux/cpumask.h>
 #include <linux/slab.h>
 
-#include "perf_event.h"
-#include "perf_event_amd_iommu.h"
+#include "../perf_event.h"
+#include "iommu.h"
 
 #define COUNTER_SHIFT		16
 
@@ -118,6 +118,11 @@ static struct amd_iommu_event_desc amd_iommu_v2_event_descs[] = {
 	AMD_IOMMU_EVENT_DESC(cmd_processed,           "csource=0x11"),
 	AMD_IOMMU_EVENT_DESC(cmd_processed_inv,       "csource=0x12"),
 	AMD_IOMMU_EVENT_DESC(tlb_inv,                 "csource=0x13"),
+	AMD_IOMMU_EVENT_DESC(ign_rd_wr_mmio_1ff8h,    "csource=0x14"),
+	AMD_IOMMU_EVENT_DESC(vapic_int_non_guest,     "csource=0x15"),
+	AMD_IOMMU_EVENT_DESC(vapic_int_guest,         "csource=0x16"),
+	AMD_IOMMU_EVENT_DESC(smi_recv,                "csource=0x17"),
+	AMD_IOMMU_EVENT_DESC(smi_blk,                 "csource=0x18"),
 	{ /* end: all zeroes */ },
 };
 
diff --git a/arch/x86/kernel/cpu/perf_event_amd_iommu.h b/arch/x86/events/amd/iommu.h
index 845d173278e3..845d173278e3 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_iommu.h
+++ b/arch/x86/events/amd/iommu.h
diff --git a/arch/x86/events/amd/power.c b/arch/x86/events/amd/power.c
new file mode 100644
index 000000000000..55a3529dbf12
--- /dev/null
+++ b/arch/x86/events/amd/power.c
@@ -0,0 +1,353 @@
+/*
+ * Performance events - AMD Processor Power Reporting Mechanism
+ *
+ * Copyright (C) 2016 Advanced Micro Devices, Inc.
+ *
+ * Author: Huang Rui <ray.huang@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/perf_event.h>
+#include <asm/cpu_device_id.h>
+#include "../perf_event.h"
+
+#define MSR_F15H_CU_PWR_ACCUMULATOR     0xc001007a
+#define MSR_F15H_CU_MAX_PWR_ACCUMULATOR 0xc001007b
+#define MSR_F15H_PTSC			0xc0010280
+
+/* Event code: LSB 8 bits, passed in attr->config any other bit is reserved. */
+#define AMD_POWER_EVENT_MASK		0xFFULL
+
+/*
+ * Accumulated power status counters.
+ */
+#define AMD_POWER_EVENTSEL_PKG		1
+
+/*
+ * The ratio of compute unit power accumulator sample period to the
+ * PTSC period.
+ */
+static unsigned int cpu_pwr_sample_ratio;
+
+/* Maximum accumulated power of a compute unit. */
+static u64 max_cu_acc_power;
+
+static struct pmu pmu_class;
+
+/*
+ * Accumulated power represents the sum of each compute unit's (CU) power
+ * consumption. On any core of each CU we read the total accumulated power from
+ * MSR_F15H_CU_PWR_ACCUMULATOR. cpu_mask represents CPU bit map of all cores
+ * which are picked to measure the power for the CUs they belong to.
+ */
+static cpumask_t cpu_mask;
+
+static void event_update(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	u64 prev_pwr_acc, new_pwr_acc, prev_ptsc, new_ptsc;
+	u64 delta, tdelta;
+
+	prev_pwr_acc = hwc->pwr_acc;
+	prev_ptsc = hwc->ptsc;
+	rdmsrl(MSR_F15H_CU_PWR_ACCUMULATOR, new_pwr_acc);
+	rdmsrl(MSR_F15H_PTSC, new_ptsc);
+
+	/*
+	 * Calculate the CU power consumption over a time period, the unit of
+	 * final value (delta) is micro-Watts. Then add it to the event count.
+	 */
+	if (new_pwr_acc < prev_pwr_acc) {
+		delta = max_cu_acc_power + new_pwr_acc;
+		delta -= prev_pwr_acc;
+	} else
+		delta = new_pwr_acc - prev_pwr_acc;
+
+	delta *= cpu_pwr_sample_ratio * 1000;
+	tdelta = new_ptsc - prev_ptsc;
+
+	do_div(delta, tdelta);
+	local64_add(delta, &event->count);
+}
+
+static void __pmu_event_start(struct perf_event *event)
+{
+	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+		return;
+
+	event->hw.state = 0;
+
+	rdmsrl(MSR_F15H_PTSC, event->hw.ptsc);
+	rdmsrl(MSR_F15H_CU_PWR_ACCUMULATOR, event->hw.pwr_acc);
+}
+
+static void pmu_event_start(struct perf_event *event, int mode)
+{
+	__pmu_event_start(event);
+}
+
+static void pmu_event_stop(struct perf_event *event, int mode)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* Mark event as deactivated and stopped. */
+	if (!(hwc->state & PERF_HES_STOPPED))
+		hwc->state |= PERF_HES_STOPPED;
+
+	/* Check if software counter update is necessary. */
+	if ((mode & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
+		/*
+		 * Drain the remaining delta count out of an event
+		 * that we are disabling:
+		 */
+		event_update(event);
+		hwc->state |= PERF_HES_UPTODATE;
+	}
+}
+
+static int pmu_event_add(struct perf_event *event, int mode)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+	if (mode & PERF_EF_START)
+		__pmu_event_start(event);
+
+	return 0;
+}
+
+static void pmu_event_del(struct perf_event *event, int flags)
+{
+	pmu_event_stop(event, PERF_EF_UPDATE);
+}
+
+static int pmu_event_init(struct perf_event *event)
+{
+	u64 cfg = event->attr.config & AMD_POWER_EVENT_MASK;
+
+	/* Only look at AMD power events. */
+	if (event->attr.type != pmu_class.type)
+		return -ENOENT;
+
+	/* Unsupported modes and filters. */
+	if (event->attr.exclude_user   ||
+	    event->attr.exclude_kernel ||
+	    event->attr.exclude_hv     ||
+	    event->attr.exclude_idle   ||
+	    event->attr.exclude_host   ||
+	    event->attr.exclude_guest  ||
+	    /* no sampling */
+	    event->attr.sample_period)
+		return -EINVAL;
+
+	if (cfg != AMD_POWER_EVENTSEL_PKG)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void pmu_event_read(struct perf_event *event)
+{
+	event_update(event);
+}
+
+static ssize_t
+get_attr_cpumask(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return cpumap_print_to_pagebuf(true, buf, &cpu_mask);
+}
+
+static DEVICE_ATTR(cpumask, S_IRUGO, get_attr_cpumask, NULL);
+
+static struct attribute *pmu_attrs[] = {
+	&dev_attr_cpumask.attr,
+	NULL,
+};
+
+static struct attribute_group pmu_attr_group = {
+	.attrs = pmu_attrs,
+};
+
+/*
+ * Currently it only supports to report the power of each
+ * processor/package.
+ */
+EVENT_ATTR_STR(power-pkg, power_pkg, "event=0x01");
+
+EVENT_ATTR_STR(power-pkg.unit, power_pkg_unit, "mWatts");
+
+/* Convert the count from micro-Watts to milli-Watts. */
+EVENT_ATTR_STR(power-pkg.scale, power_pkg_scale, "1.000000e-3");
+
+static struct attribute *events_attr[] = {
+	EVENT_PTR(power_pkg),
+	EVENT_PTR(power_pkg_unit),
+	EVENT_PTR(power_pkg_scale),
+	NULL,
+};
+
+static struct attribute_group pmu_events_group = {
+	.name	= "events",
+	.attrs	= events_attr,
+};
+
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *formats_attr[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group pmu_format_group = {
+	.name	= "format",
+	.attrs	= formats_attr,
+};
+
+static const struct attribute_group *attr_groups[] = {
+	&pmu_attr_group,
+	&pmu_format_group,
+	&pmu_events_group,
+	NULL,
+};
+
+static struct pmu pmu_class = {
+	.attr_groups	= attr_groups,
+	/* system-wide only */
+	.task_ctx_nr	= perf_invalid_context,
+	.event_init	= pmu_event_init,
+	.add		= pmu_event_add,
+	.del		= pmu_event_del,
+	.start		= pmu_event_start,
+	.stop		= pmu_event_stop,
+	.read		= pmu_event_read,
+};
+
+static void power_cpu_exit(int cpu)
+{
+	int target;
+
+	if (!cpumask_test_and_clear_cpu(cpu, &cpu_mask))
+		return;
+
+	/*
+	 * Find a new CPU on the same compute unit, if was set in cpumask
+	 * and still some CPUs on compute unit. Then migrate event and
+	 * context to new CPU.
+	 */
+	target = cpumask_any_but(topology_sibling_cpumask(cpu), cpu);
+	if (target < nr_cpumask_bits) {
+		cpumask_set_cpu(target, &cpu_mask);
+		perf_pmu_migrate_context(&pmu_class, cpu, target);
+	}
+}
+
+static void power_cpu_init(int cpu)
+{
+	int target;
+
+	/*
+	 * 1) If any CPU is set at cpu_mask in the same compute unit, do
+	 * nothing.
+	 * 2) If no CPU is set at cpu_mask in the same compute unit,
+	 * set current STARTING CPU.
+	 *
+	 * Note: if there is a CPU aside of the new one already in the
+	 * sibling mask, then it is also in cpu_mask.
+	 */
+	target = cpumask_any_but(topology_sibling_cpumask(cpu), cpu);
+	if (target >= nr_cpumask_bits)
+		cpumask_set_cpu(cpu, &cpu_mask);
+}
+
+static int
+power_cpu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (long)hcpu;
+
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_DOWN_FAILED:
+	case CPU_STARTING:
+		power_cpu_init(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+		power_cpu_exit(cpu);
+		break;
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block power_cpu_notifier_nb = {
+	.notifier_call = power_cpu_notifier,
+	.priority = CPU_PRI_PERF,
+};
+
+static const struct x86_cpu_id cpu_match[] = {
+	{ .vendor = X86_VENDOR_AMD, .family = 0x15 },
+	{},
+};
+
+static int __init amd_power_pmu_init(void)
+{
+	int cpu, target, ret;
+
+	if (!x86_match_cpu(cpu_match))
+		return 0;
+
+	if (!boot_cpu_has(X86_FEATURE_ACC_POWER))
+		return -ENODEV;
+
+	cpu_pwr_sample_ratio = cpuid_ecx(0x80000007);
+
+	if (rdmsrl_safe(MSR_F15H_CU_MAX_PWR_ACCUMULATOR, &max_cu_acc_power)) {
+		pr_err("Failed to read max compute unit power accumulator MSR\n");
+		return -ENODEV;
+	}
+
+	cpu_notifier_register_begin();
+
+	/* Choose one online core of each compute unit. */
+	for_each_online_cpu(cpu) {
+		target = cpumask_first(topology_sibling_cpumask(cpu));
+		if (!cpumask_test_cpu(target, &cpu_mask))
+			cpumask_set_cpu(target, &cpu_mask);
+	}
+
+	ret = perf_pmu_register(&pmu_class, "power", -1);
+	if (WARN_ON(ret)) {
+		pr_warn("AMD Power PMU registration failed\n");
+		goto out;
+	}
+
+	__register_cpu_notifier(&power_cpu_notifier_nb);
+
+	pr_info("AMD Power PMU detected\n");
+
+out:
+	cpu_notifier_register_done();
+
+	return ret;
+}
+module_init(amd_power_pmu_init);
+
+static void __exit amd_power_pmu_exit(void)
+{
+	cpu_notifier_register_begin();
+	__unregister_cpu_notifier(&power_cpu_notifier_nb);
+	cpu_notifier_register_done();
+
+	perf_pmu_unregister(&pmu_class);
+}
+module_exit(amd_power_pmu_exit);
+
+MODULE_AUTHOR("Huang Rui <ray.huang@amd.com>");
+MODULE_DESCRIPTION("AMD Processor Power Reporting Mechanism");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/x86/kernel/cpu/perf_event_amd_uncore.c b/arch/x86/events/amd/uncore.c
index cc6cedb8f25d..3db9569e658c 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_uncore.c
+++ b/arch/x86/events/amd/uncore.c
@@ -323,6 +323,8 @@ static int amd_uncore_cpu_up_prepare(unsigned int cpu)
 	return 0;
 
 fail:
+	if (amd_uncore_nb)
+		*per_cpu_ptr(amd_uncore_nb, cpu) = NULL;
 	kfree(uncore_nb);
 	return -ENOMEM;
 }
@@ -523,10 +525,10 @@ static int __init amd_uncore_init(void)
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
 		goto fail_nodev;
 
-	if (!cpu_has_topoext)
+	if (!boot_cpu_has(X86_FEATURE_TOPOEXT))
 		goto fail_nodev;
 
-	if (cpu_has_perfctr_nb) {
+	if (boot_cpu_has(X86_FEATURE_PERFCTR_NB)) {
 		amd_uncore_nb = alloc_percpu(struct amd_uncore *);
 		if (!amd_uncore_nb) {
 			ret = -ENOMEM;
@@ -536,11 +538,11 @@ static int __init amd_uncore_init(void)
 		if (ret)
 			goto fail_nb;
 
-		printk(KERN_INFO "perf: AMD NB counters detected\n");
+		pr_info("perf: AMD NB counters detected\n");
 		ret = 0;
 	}
 
-	if (cpu_has_perfctr_l2) {
+	if (boot_cpu_has(X86_FEATURE_PERFCTR_L2)) {
 		amd_uncore_l2 = alloc_percpu(struct amd_uncore *);
 		if (!amd_uncore_l2) {
 			ret = -ENOMEM;
@@ -550,7 +552,7 @@ static int __init amd_uncore_init(void)
 		if (ret)
 			goto fail_l2;
 
-		printk(KERN_INFO "perf: AMD L2I counters detected\n");
+		pr_info("perf: AMD L2I counters detected\n");
 		ret = 0;
 	}
 
@@ -583,10 +585,11 @@ fail_online:
 
 	/* amd_uncore_nb/l2 should have been freed by cleanup_cpu_online */
 	amd_uncore_nb = amd_uncore_l2 = NULL;
-	if (cpu_has_perfctr_l2)
+
+	if (boot_cpu_has(X86_FEATURE_PERFCTR_L2))
 		perf_pmu_unregister(&amd_l2_pmu);
 fail_l2:
-	if (cpu_has_perfctr_nb)
+	if (boot_cpu_has(X86_FEATURE_PERFCTR_NB))
 		perf_pmu_unregister(&amd_nb_pmu);
 	if (amd_uncore_l2)
 		free_percpu(amd_uncore_l2);
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/events/core.c
index 4562cf070c27..041e442a3e28 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/events/core.c
@@ -5,7 +5,7 @@
  *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
  *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
  *  Copyright (C) 2009 Google, Inc., Stephane Eranian
  *
@@ -254,15 +254,16 @@ static bool check_hw_exists(void)
 	 * We still allow the PMU driver to operate:
 	 */
 	if (bios_fail) {
-		printk(KERN_CONT "Broken BIOS detected, complain to your hardware vendor.\n");
-		printk(KERN_ERR FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n", reg_fail, val_fail);
+		pr_cont("Broken BIOS detected, complain to your hardware vendor.\n");
+		pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n",
+			      reg_fail, val_fail);
 	}
 
 	return true;
 
 msr_fail:
-	printk(KERN_CONT "Broken PMU hardware detected, using software events only.\n");
-	printk("%sFailed to access perfctr msr (MSR %x is %Lx)\n",
+	pr_cont("Broken PMU hardware detected, using software events only.\n");
+	pr_info("%sFailed to access perfctr msr (MSR %x is %Lx)\n",
 		boot_cpu_has(X86_FEATURE_HYPERVISOR) ? KERN_INFO : KERN_ERR,
 		reg, val_new);
 
@@ -482,6 +483,9 @@ int x86_pmu_hw_config(struct perf_event *event)
 			/* Support for IP fixup */
 			if (x86_pmu.lbr_nr || x86_pmu.intel_cap.pebs_format >= 2)
 				precise++;
+
+			if (x86_pmu.pebs_prec_dist)
+				precise++;
 		}
 
 		if (event->attr.precise_ip > precise)
@@ -593,6 +597,19 @@ void x86_pmu_disable_all(void)
 	}
 }
 
+/*
+ * There may be PMI landing after enabled=0. The PMI hitting could be before or
+ * after disable_all.
+ *
+ * If PMI hits before disable_all, the PMU will be disabled in the NMI handler.
+ * It will not be re-enabled in the NMI handler again, because enabled=0. After
+ * handling the NMI, disable_all will be called, which will not change the
+ * state either. If PMI hits after disable_all, the PMU is already disabled
+ * before entering NMI handler. The NMI handler will not change the state
+ * either.
+ *
+ * So either situation is harmless.
+ */
 static void x86_pmu_disable(struct pmu *pmu)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
@@ -1531,6 +1548,7 @@ static void __init filter_events(struct attribute **attrs)
 {
 	struct device_attribute *d;
 	struct perf_pmu_events_attr *pmu_attr;
+	int offset = 0;
 	int i, j;
 
 	for (i = 0; attrs[i]; i++) {
@@ -1539,7 +1557,7 @@ static void __init filter_events(struct attribute **attrs)
 		/* str trumps id */
 		if (pmu_attr->event_str)
 			continue;
-		if (x86_pmu.event_map(i))
+		if (x86_pmu.event_map(i + offset))
 			continue;
 
 		for (j = i; attrs[j]; j++)
@@ -1547,6 +1565,14 @@ static void __init filter_events(struct attribute **attrs)
 
 		/* Check the shifted attr. */
 		i--;
+
+		/*
+		 * event_map() is index based, the attrs array is organized
+		 * by increasing event index. If we shift the events, then
+		 * we need to compensate for the event_map(), otherwise
+		 * we are looking up the wrong event in the map
+		 */
+		offset++;
 	}
 }
 
@@ -1576,8 +1602,7 @@ __init struct attribute **merge_attr(struct attribute **a, struct attribute **b)
 	return new;
 }
 
-ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr,
-			  char *page)
+ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr, char *page)
 {
 	struct perf_pmu_events_attr *pmu_attr = \
 		container_of(attr, struct perf_pmu_events_attr, attr);
@@ -1589,6 +1614,7 @@ ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr,
 
 	return x86_pmu.events_sysfs_show(page, config);
 }
+EXPORT_SYMBOL_GPL(events_sysfs_show);
 
 EVENT_ATTR(cpu-cycles,			CPU_CYCLES		);
 EVENT_ATTR(instructions,		INSTRUCTIONS		);
@@ -2168,11 +2194,11 @@ static int backtrace_stack(void *data, char *name)
 	return 0;
 }
 
-static void backtrace_address(void *data, unsigned long addr, int reliable)
+static int backtrace_address(void *data, unsigned long addr, int reliable)
 {
 	struct perf_callchain_entry *entry = data;
 
-	perf_callchain_store(entry, addr);
+	return perf_callchain_store(entry, addr);
 }
 
 static const struct stacktrace_ops backtrace_ops = {
@@ -2250,12 +2276,19 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 	ss_base = get_segment_base(regs->ss);
 
 	fp = compat_ptr(ss_base + regs->bp);
+	pagefault_disable();
 	while (entry->nr < PERF_MAX_STACK_DEPTH) {
 		unsigned long bytes;
 		frame.next_frame     = 0;
 		frame.return_address = 0;
 
-		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+		if (!access_ok(VERIFY_READ, fp, 8))
+			break;
+
+		bytes = __copy_from_user_nmi(&frame.next_frame, fp, 4);
+		if (bytes != 0)
+			break;
+		bytes = __copy_from_user_nmi(&frame.return_address, fp+4, 4);
 		if (bytes != 0)
 			break;
 
@@ -2265,6 +2298,7 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 		perf_callchain_store(entry, cs_base + frame.return_address);
 		fp = compat_ptr(ss_base + frame.next_frame);
 	}
+	pagefault_enable();
 	return 1;
 }
 #else
@@ -2302,12 +2336,19 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 	if (perf_callchain_user32(regs, entry))
 		return;
 
+	pagefault_disable();
 	while (entry->nr < PERF_MAX_STACK_DEPTH) {
 		unsigned long bytes;
 		frame.next_frame	     = NULL;
 		frame.return_address = 0;
 
-		bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+		if (!access_ok(VERIFY_READ, fp, 16))
+			break;
+
+		bytes = __copy_from_user_nmi(&frame.next_frame, fp, 8);
+		if (bytes != 0)
+			break;
+		bytes = __copy_from_user_nmi(&frame.return_address, fp+8, 8);
 		if (bytes != 0)
 			break;
 
@@ -2315,8 +2356,9 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 			break;
 
 		perf_callchain_store(entry, frame.return_address);
-		fp = frame.next_frame;
+		fp = (void __user *)frame.next_frame;
 	}
+	pagefault_enable();
 }
 
 /*
diff --git a/arch/x86/kernel/cpu/perf_event_intel_bts.c b/arch/x86/events/intel/bts.c
index 2cad71d1b14c..b99dc9258c0f 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_bts.c
+++ b/arch/x86/events/intel/bts.c
@@ -26,7 +26,7 @@
 #include <asm-generic/sizes.h>
 #include <asm/perf_event.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 struct bts_ctx {
 	struct perf_output_handle	handle;
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/events/intel/core.c
index f63360be2238..68fa55b4d42e 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/events/intel/core.c
@@ -18,7 +18,7 @@
 #include <asm/hardirq.h>
 #include <asm/apic.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 /*
  * Intel PerfMon, used on Core and later.
@@ -185,6 +185,14 @@ struct event_constraint intel_skl_event_constraints[] = {
 	EVENT_CONSTRAINT_END
 };
 
+static struct extra_reg intel_knl_extra_regs[] __read_mostly = {
+	INTEL_UEVENT_EXTRA_REG(0x01b7,
+			       MSR_OFFCORE_RSP_0, 0x7f9ffbffffull, RSP_0),
+	INTEL_UEVENT_EXTRA_REG(0x02b7,
+			       MSR_OFFCORE_RSP_1, 0x3f9ffbffffull, RSP_1),
+	EVENT_EXTRA_END
+};
+
 static struct extra_reg intel_snb_extra_regs[] __read_mostly = {
 	/* must define OFFCORE_RSP_X first, see intel_fixup_er() */
 	INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0),
@@ -232,7 +240,7 @@ static struct event_constraint intel_hsw_event_constraints[] = {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
 	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
 	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
-	INTEL_EVENT_CONSTRAINT(0x48, 0x4), /* L1D_PEND_MISS.* */
+	INTEL_UEVENT_CONSTRAINT(0x148, 0x4),	/* L1D_PEND_MISS.PENDING */
 	INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PREC_DIST */
 	INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.LOAD_LATENCY */
 	/* CYCLE_ACTIVITY.CYCLES_L1D_PENDING */
@@ -255,7 +263,7 @@ struct event_constraint intel_bdw_event_constraints[] = {
 	FIXED_EVENT_CONSTRAINT(0x003c, 1),	/* CPU_CLK_UNHALTED.CORE */
 	FIXED_EVENT_CONSTRAINT(0x0300, 2),	/* CPU_CLK_UNHALTED.REF */
 	INTEL_UEVENT_CONSTRAINT(0x148, 0x4),	/* L1D_PEND_MISS.PENDING */
-	INTEL_UEVENT_CONSTRAINT(0x8a3, 0x4),	/* CYCLE_ACTIVITY.CYCLES_L1D_MISS */
+	INTEL_UBIT_EVENT_CONSTRAINT(0x8a3, 0x4),	/* CYCLE_ACTIVITY.CYCLES_L1D_MISS */
 	EVENT_CONSTRAINT_END
 };
 
@@ -1457,8 +1465,52 @@ static __initconst const u64 slm_hw_cache_event_ids
  },
 };
 
+#define KNL_OT_L2_HITE		BIT_ULL(19) /* Other Tile L2 Hit */
+#define KNL_OT_L2_HITF		BIT_ULL(20) /* Other Tile L2 Hit */
+#define KNL_MCDRAM_LOCAL	BIT_ULL(21)
+#define KNL_MCDRAM_FAR		BIT_ULL(22)
+#define KNL_DDR_LOCAL		BIT_ULL(23)
+#define KNL_DDR_FAR		BIT_ULL(24)
+#define KNL_DRAM_ANY		(KNL_MCDRAM_LOCAL | KNL_MCDRAM_FAR | \
+				    KNL_DDR_LOCAL | KNL_DDR_FAR)
+#define KNL_L2_READ		SLM_DMND_READ
+#define KNL_L2_WRITE		SLM_DMND_WRITE
+#define KNL_L2_PREFETCH		SLM_DMND_PREFETCH
+#define KNL_L2_ACCESS		SLM_LLC_ACCESS
+#define KNL_L2_MISS		(KNL_OT_L2_HITE | KNL_OT_L2_HITF | \
+				   KNL_DRAM_ANY | SNB_SNP_ANY | \
+						  SNB_NON_DRAM)
+
+static __initconst const u64 knl_hw_cache_extra_regs
+				[PERF_COUNT_HW_CACHE_MAX]
+				[PERF_COUNT_HW_CACHE_OP_MAX]
+				[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = KNL_L2_READ | KNL_L2_ACCESS,
+			[C(RESULT_MISS)]   = 0,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)] = KNL_L2_WRITE | KNL_L2_ACCESS,
+			[C(RESULT_MISS)]   = KNL_L2_WRITE | KNL_L2_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)] = KNL_L2_PREFETCH | KNL_L2_ACCESS,
+			[C(RESULT_MISS)]   = KNL_L2_PREFETCH | KNL_L2_MISS,
+		},
+	},
+};
+
 /*
- * Use from PMIs where the LBRs are already disabled.
+ * Used from PMIs where the LBRs are already disabled.
+ *
+ * This function could be called consecutively. It is required to remain in
+ * disabled state if called consecutively.
+ *
+ * During consecutive calls, the same disable value will be written to related
+ * registers, so the PMU state remains unchanged. hw.state in
+ * intel_bts_disable_local will remain PERF_HES_STOPPED too in consecutive
+ * calls.
  */
 static void __intel_pmu_disable_all(void)
 {
@@ -1840,6 +1892,16 @@ again:
 	if (__test_and_clear_bit(62, (unsigned long *)&status)) {
 		handled++;
 		x86_pmu.drain_pebs(regs);
+		/*
+		 * There are cases where, even though, the PEBS ovfl bit is set
+		 * in GLOBAL_OVF_STATUS, the PEBS events may also have their
+		 * overflow bits set for their counters. We must clear them
+		 * here because they have been processed as exact samples in
+		 * the drain_pebs() routine. They must not be processed again
+		 * in the for_each_bit_set() loop for regular samples below.
+		 */
+		status &= ~cpuc->pebs_enabled;
+		status &= x86_pmu.intel_ctrl | GLOBAL_STATUS_TRACE_TOPAPMI;
 	}
 
 	/*
@@ -1885,7 +1947,10 @@ again:
 		goto again;
 
 done:
-	__intel_pmu_enable_all(0, true);
+	/* Only restore PMU state when it's active. See x86_pmu_disable(). */
+	if (cpuc->enabled)
+		__intel_pmu_enable_all(0, true);
+
 	/*
 	 * Only unmask the NMI after the overflow counters
 	 * have been reset. This avoids spurious NMIs on
@@ -1916,7 +1981,8 @@ intel_bts_constraints(struct perf_event *event)
 
 static int intel_alt_er(int idx, u64 config)
 {
-	int alt_idx;
+	int alt_idx = idx;
+
 	if (!(x86_pmu.flags & PMU_FL_HAS_RSP_1))
 		return idx;
 
@@ -2475,6 +2541,44 @@ static void intel_pebs_aliases_snb(struct perf_event *event)
 	}
 }
 
+static void intel_pebs_aliases_precdist(struct perf_event *event)
+{
+	if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+		/*
+		 * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
+		 * (0x003c) so that we can use it with PEBS.
+		 *
+		 * The regular CPU_CLK_UNHALTED.THREAD_P event (0x003c) isn't
+		 * PEBS capable. However we can use INST_RETIRED.PREC_DIST
+		 * (0x01c0), which is a PEBS capable event, to get the same
+		 * count.
+		 *
+		 * The PREC_DIST event has special support to minimize sample
+		 * shadowing effects. One drawback is that it can be
+		 * only programmed on counter 1, but that seems like an
+		 * acceptable trade off.
+		 */
+		u64 alt_config = X86_CONFIG(.event=0xc0, .umask=0x01, .inv=1, .cmask=16);
+
+		alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
+		event->hw.config = alt_config;
+	}
+}
+
+static void intel_pebs_aliases_ivb(struct perf_event *event)
+{
+	if (event->attr.precise_ip < 3)
+		return intel_pebs_aliases_snb(event);
+	return intel_pebs_aliases_precdist(event);
+}
+
+static void intel_pebs_aliases_skl(struct perf_event *event)
+{
+	if (event->attr.precise_ip < 3)
+		return intel_pebs_aliases_core2(event);
+	return intel_pebs_aliases_precdist(event);
+}
+
 static unsigned long intel_pmu_free_running_flags(struct perf_event *event)
 {
 	unsigned long flags = x86_pmu.free_running_flags;
@@ -2815,14 +2919,12 @@ static void intel_pmu_cpu_starting(int cpu)
 		return;
 
 	if (!(x86_pmu.flags & PMU_FL_NO_HT_SHARING)) {
-		void **onln = &cpuc->kfree_on_online[X86_PERF_KFREE_SHARED];
-
 		for_each_cpu(i, topology_sibling_cpumask(cpu)) {
 			struct intel_shared_regs *pc;
 
 			pc = per_cpu(cpu_hw_events, i).shared_regs;
 			if (pc && pc->core_id == core_id) {
-				*onln = cpuc->shared_regs;
+				cpuc->kfree_on_online[0] = cpuc->shared_regs;
 				cpuc->shared_regs = pc;
 				break;
 			}
@@ -3315,6 +3417,7 @@ __init int intel_pmu_init(void)
 		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] =
 			X86_CONFIG(.event=0xb1, .umask=0x3f, .inv=1, .cmask=1);
 
+		intel_pmu_pebs_data_source_nhm();
 		x86_add_quirk(intel_nehalem_quirk);
 
 		pr_cont("Nehalem events, ");
@@ -3332,6 +3435,7 @@ __init int intel_pmu_init(void)
 
 		x86_pmu.event_constraints = intel_gen_event_constraints;
 		x86_pmu.pebs_constraints = intel_atom_pebs_event_constraints;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_core2;
 		pr_cont("Atom events, ");
 		break;
 
@@ -3377,6 +3481,7 @@ __init int intel_pmu_init(void)
 		intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] =
 			X86_CONFIG(.event=0xb1, .umask=0x3f, .inv=1, .cmask=1);
 
+		intel_pmu_pebs_data_source_nhm();
 		pr_cont("Westmere events, ");
 		break;
 
@@ -3431,7 +3536,8 @@ __init int intel_pmu_init(void)
 
 		x86_pmu.event_constraints = intel_ivb_event_constraints;
 		x86_pmu.pebs_constraints = intel_ivb_pebs_event_constraints;
-		x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_ivb;
+		x86_pmu.pebs_prec_dist = true;
 		if (boot_cpu_data.x86_model == 62)
 			x86_pmu.extra_regs = intel_snbep_extra_regs;
 		else
@@ -3464,7 +3570,8 @@ __init int intel_pmu_init(void)
 		x86_pmu.event_constraints = intel_hsw_event_constraints;
 		x86_pmu.pebs_constraints = intel_hsw_pebs_event_constraints;
 		x86_pmu.extra_regs = intel_snbep_extra_regs;
-		x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_ivb;
+		x86_pmu.pebs_prec_dist = true;
 		/* all extra regs are per-cpu when HT is on */
 		x86_pmu.flags |= PMU_FL_HAS_RSP_1;
 		x86_pmu.flags |= PMU_FL_NO_HT_SHARING;
@@ -3497,9 +3604,10 @@ __init int intel_pmu_init(void)
 		intel_pmu_lbr_init_hsw();
 
 		x86_pmu.event_constraints = intel_bdw_event_constraints;
-		x86_pmu.pebs_constraints = intel_hsw_pebs_event_constraints;
+		x86_pmu.pebs_constraints = intel_bdw_pebs_event_constraints;
 		x86_pmu.extra_regs = intel_snbep_extra_regs;
-		x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_ivb;
+		x86_pmu.pebs_prec_dist = true;
 		/* all extra regs are per-cpu when HT is on */
 		x86_pmu.flags |= PMU_FL_HAS_RSP_1;
 		x86_pmu.flags |= PMU_FL_NO_HT_SHARING;
@@ -3511,6 +3619,24 @@ __init int intel_pmu_init(void)
 		pr_cont("Broadwell events, ");
 		break;
 
+	case 87: /* Knights Landing Xeon Phi */
+		memcpy(hw_cache_event_ids,
+		       slm_hw_cache_event_ids, sizeof(hw_cache_event_ids));
+		memcpy(hw_cache_extra_regs,
+		       knl_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
+		intel_pmu_lbr_init_knl();
+
+		x86_pmu.event_constraints = intel_slm_event_constraints;
+		x86_pmu.pebs_constraints = intel_slm_pebs_event_constraints;
+		x86_pmu.extra_regs = intel_knl_extra_regs;
+
+		/* all extra regs are per-cpu when HT is on */
+		x86_pmu.flags |= PMU_FL_HAS_RSP_1;
+		x86_pmu.flags |= PMU_FL_NO_HT_SHARING;
+
+		pr_cont("Knights Landing events, ");
+		break;
+
 	case 78: /* 14nm Skylake Mobile */
 	case 94: /* 14nm Skylake Desktop */
 		x86_pmu.late_ack = true;
@@ -3521,7 +3647,8 @@ __init int intel_pmu_init(void)
 		x86_pmu.event_constraints = intel_skl_event_constraints;
 		x86_pmu.pebs_constraints = intel_skl_pebs_event_constraints;
 		x86_pmu.extra_regs = intel_skl_extra_regs;
-		x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_skl;
+		x86_pmu.pebs_prec_dist = true;
 		/* all extra regs are per-cpu when HT is on */
 		x86_pmu.flags |= PMU_FL_HAS_RSP_1;
 		x86_pmu.flags |= PMU_FL_NO_HT_SHARING;
diff --git a/arch/x86/kernel/cpu/perf_event_intel_cqm.c b/arch/x86/events/intel/cqm.c
index 377e8f8ed391..7b5fd811ef45 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_cqm.c
+++ b/arch/x86/events/intel/cqm.c
@@ -7,14 +7,22 @@
 #include <linux/perf_event.h>
 #include <linux/slab.h>
 #include <asm/cpu_device_id.h>
-#include "perf_event.h"
+#include "../perf_event.h"
 
 #define MSR_IA32_PQR_ASSOC	0x0c8f
 #define MSR_IA32_QM_CTR		0x0c8e
 #define MSR_IA32_QM_EVTSEL	0x0c8d
 
+#define MBM_CNTR_WIDTH		24
+/*
+ * Guaranteed time in ms as per SDM where MBM counters will not overflow.
+ */
+#define MBM_CTR_OVERFLOW_TIME	1000
+
 static u32 cqm_max_rmid = -1;
 static unsigned int cqm_l3_scale; /* supposedly cacheline size */
+static bool cqm_enabled, mbm_enabled;
+unsigned int mbm_socket_max;
 
 /**
  * struct intel_pqr_state - State cache for the PQR MSR
@@ -42,8 +50,37 @@ struct intel_pqr_state {
  * interrupts disabled, which is sufficient for the protection.
  */
 static DEFINE_PER_CPU(struct intel_pqr_state, pqr_state);
+static struct hrtimer *mbm_timers;
+/**
+ * struct sample - mbm event's (local or total) data
+ * @total_bytes    #bytes since we began monitoring
+ * @prev_msr       previous value of MSR
+ */
+struct sample {
+	u64	total_bytes;
+	u64	prev_msr;
+};
 
 /*
+ * samples profiled for total memory bandwidth type events
+ */
+static struct sample *mbm_total;
+/*
+ * samples profiled for local memory bandwidth type events
+ */
+static struct sample *mbm_local;
+
+#define pkg_id	topology_physical_package_id(smp_processor_id())
+/*
+ * rmid_2_index returns the index for the rmid in mbm_local/mbm_total array.
+ * mbm_total[] and mbm_local[] are linearly indexed by socket# * max number of
+ * rmids per socket, an example is given below
+ * RMID1 of Socket0:  vrmid =  1
+ * RMID1 of Socket1:  vrmid =  1 * (cqm_max_rmid + 1) + 1
+ * RMID1 of Socket2:  vrmid =  2 * (cqm_max_rmid + 1) + 1
+ */
+#define rmid_2_index(rmid)  ((pkg_id * (cqm_max_rmid + 1)) + rmid)
+/*
  * Protects cache_cgroups and cqm_rmid_free_lru and cqm_rmid_limbo_lru.
  * Also protects event->hw.cqm_rmid
  *
@@ -65,9 +102,13 @@ static cpumask_t cqm_cpumask;
 #define RMID_VAL_ERROR		(1ULL << 63)
 #define RMID_VAL_UNAVAIL	(1ULL << 62)
 
-#define QOS_L3_OCCUP_EVENT_ID	(1 << 0)
-
-#define QOS_EVENT_MASK	QOS_L3_OCCUP_EVENT_ID
+/*
+ * Event IDs are used to program IA32_QM_EVTSEL before reading event
+ * counter from IA32_QM_CTR
+ */
+#define QOS_L3_OCCUP_EVENT_ID	0x01
+#define QOS_MBM_TOTAL_EVENT_ID	0x02
+#define QOS_MBM_LOCAL_EVENT_ID	0x03
 
 /*
  * This is central to the rotation algorithm in __intel_cqm_rmid_rotate().
@@ -211,6 +252,21 @@ static void __put_rmid(u32 rmid)
 	list_add_tail(&entry->list, &cqm_rmid_limbo_lru);
 }
 
+static void cqm_cleanup(void)
+{
+	int i;
+
+	if (!cqm_rmid_ptrs)
+		return;
+
+	for (i = 0; i < cqm_max_rmid; i++)
+		kfree(cqm_rmid_ptrs[i]);
+
+	kfree(cqm_rmid_ptrs);
+	cqm_rmid_ptrs = NULL;
+	cqm_enabled = false;
+}
+
 static int intel_cqm_setup_rmid_cache(void)
 {
 	struct cqm_rmid_entry *entry;
@@ -218,7 +274,7 @@ static int intel_cqm_setup_rmid_cache(void)
 	int r = 0;
 
 	nr_rmids = cqm_max_rmid + 1;
-	cqm_rmid_ptrs = kmalloc(sizeof(struct cqm_rmid_entry *) *
+	cqm_rmid_ptrs = kzalloc(sizeof(struct cqm_rmid_entry *) *
 				nr_rmids, GFP_KERNEL);
 	if (!cqm_rmid_ptrs)
 		return -ENOMEM;
@@ -249,11 +305,9 @@ static int intel_cqm_setup_rmid_cache(void)
 	mutex_unlock(&cache_mutex);
 
 	return 0;
-fail:
-	while (r--)
-		kfree(cqm_rmid_ptrs[r]);
 
-	kfree(cqm_rmid_ptrs);
+fail:
+	cqm_cleanup();
 	return -ENOMEM;
 }
 
@@ -281,9 +335,13 @@ static bool __match_event(struct perf_event *a, struct perf_event *b)
 
 	/*
 	 * Events that target same task are placed into the same cache group.
+	 * Mark it as a multi event group, so that we update ->count
+	 * for every event rather than just the group leader later.
 	 */
-	if (a->hw.target == b->hw.target)
+	if (a->hw.target == b->hw.target) {
+		b->hw.is_group_event = true;
 		return true;
+	}
 
 	/*
 	 * Are we an inherited event?
@@ -298,7 +356,7 @@ static bool __match_event(struct perf_event *a, struct perf_event *b)
 static inline struct perf_cgroup *event_to_cgroup(struct perf_event *event)
 {
 	if (event->attach_state & PERF_ATTACH_TASK)
-		return perf_cgroup_from_task(event->hw.target);
+		return perf_cgroup_from_task(event->hw.target, event->ctx);
 
 	return event->cgrp;
 }
@@ -392,10 +450,26 @@ static bool __conflict_event(struct perf_event *a, struct perf_event *b)
 
 struct rmid_read {
 	u32 rmid;
+	u32 evt_type;
 	atomic64_t value;
 };
 
 static void __intel_cqm_event_count(void *info);
+static void init_mbm_sample(u32 rmid, u32 evt_type);
+static void __intel_mbm_event_count(void *info);
+
+static bool is_mbm_event(int e)
+{
+	return (e >= QOS_MBM_TOTAL_EVENT_ID && e <= QOS_MBM_LOCAL_EVENT_ID);
+}
+
+static void cqm_mask_call(struct rmid_read *rr)
+{
+	if (is_mbm_event(rr->evt_type))
+		on_each_cpu_mask(&cqm_cpumask, __intel_mbm_event_count, rr, 1);
+	else
+		on_each_cpu_mask(&cqm_cpumask, __intel_cqm_event_count, rr, 1);
+}
 
 /*
  * Exchange the RMID of a group of events.
@@ -413,12 +487,12 @@ static u32 intel_cqm_xchg_rmid(struct perf_event *group, u32 rmid)
 	 */
 	if (__rmid_valid(old_rmid) && !__rmid_valid(rmid)) {
 		struct rmid_read rr = {
-			.value = ATOMIC64_INIT(0),
 			.rmid = old_rmid,
+			.evt_type = group->attr.config,
+			.value = ATOMIC64_INIT(0),
 		};
 
-		on_each_cpu_mask(&cqm_cpumask, __intel_cqm_event_count,
-				 &rr, 1);
+		cqm_mask_call(&rr);
 		local64_set(&group->count, atomic64_read(&rr.value));
 	}
 
@@ -430,6 +504,22 @@ static u32 intel_cqm_xchg_rmid(struct perf_event *group, u32 rmid)
 
 	raw_spin_unlock_irq(&cache_lock);
 
+	/*
+	 * If the allocation is for mbm, init the mbm stats.
+	 * Need to check if each event in the group is mbm event
+	 * because there could be multiple type of events in the same group.
+	 */
+	if (__rmid_valid(rmid)) {
+		event = group;
+		if (is_mbm_event(event->attr.config))
+			init_mbm_sample(rmid, event->attr.config);
+
+		list_for_each_entry(event, head, hw.cqm_group_entry) {
+			if (is_mbm_event(event->attr.config))
+				init_mbm_sample(rmid, event->attr.config);
+		}
+	}
+
 	return old_rmid;
 }
 
@@ -837,6 +927,72 @@ static void intel_cqm_rmid_rotate(struct work_struct *work)
 	schedule_delayed_work(&intel_cqm_rmid_work, delay);
 }
 
+static u64 update_sample(unsigned int rmid, u32 evt_type, int first)
+{
+	struct sample *mbm_current;
+	u32 vrmid = rmid_2_index(rmid);
+	u64 val, bytes, shift;
+	u32 eventid;
+
+	if (evt_type == QOS_MBM_LOCAL_EVENT_ID) {
+		mbm_current = &mbm_local[vrmid];
+		eventid     = QOS_MBM_LOCAL_EVENT_ID;
+	} else {
+		mbm_current = &mbm_total[vrmid];
+		eventid     = QOS_MBM_TOTAL_EVENT_ID;
+	}
+
+	wrmsr(MSR_IA32_QM_EVTSEL, eventid, rmid);
+	rdmsrl(MSR_IA32_QM_CTR, val);
+	if (val & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL))
+		return mbm_current->total_bytes;
+
+	if (first) {
+		mbm_current->prev_msr = val;
+		mbm_current->total_bytes = 0;
+		return mbm_current->total_bytes;
+	}
+
+	/*
+	 * The h/w guarantees that counters will not overflow
+	 * so long as we poll them at least once per second.
+	 */
+	shift = 64 - MBM_CNTR_WIDTH;
+	bytes = (val << shift) - (mbm_current->prev_msr << shift);
+	bytes >>= shift;
+
+	bytes *= cqm_l3_scale;
+
+	mbm_current->total_bytes += bytes;
+	mbm_current->prev_msr = val;
+
+	return mbm_current->total_bytes;
+}
+
+static u64 rmid_read_mbm(unsigned int rmid, u32 evt_type)
+{
+	return update_sample(rmid, evt_type, 0);
+}
+
+static void __intel_mbm_event_init(void *info)
+{
+	struct rmid_read *rr = info;
+
+	update_sample(rr->rmid, rr->evt_type, 1);
+}
+
+static void init_mbm_sample(u32 rmid, u32 evt_type)
+{
+	struct rmid_read rr = {
+		.rmid = rmid,
+		.evt_type = evt_type,
+		.value = ATOMIC64_INIT(0),
+	};
+
+	/* on each socket, init sample */
+	on_each_cpu_mask(&cqm_cpumask, __intel_mbm_event_init, &rr, 1);
+}
+
 /*
  * Find a group and setup RMID.
  *
@@ -849,6 +1005,7 @@ static void intel_cqm_setup_event(struct perf_event *event,
 	bool conflict = false;
 	u32 rmid;
 
+	event->hw.is_group_event = false;
 	list_for_each_entry(iter, &cache_groups, hw.cqm_groups_entry) {
 		rmid = iter->hw.cqm_rmid;
 
@@ -856,6 +1013,8 @@ static void intel_cqm_setup_event(struct perf_event *event,
 			/* All tasks in a group share an RMID */
 			event->hw.cqm_rmid = rmid;
 			*group = iter;
+			if (is_mbm_event(event->attr.config) && __rmid_valid(rmid))
+				init_mbm_sample(rmid, event->attr.config);
 			return;
 		}
 
@@ -872,6 +1031,9 @@ static void intel_cqm_setup_event(struct perf_event *event,
 	else
 		rmid = __get_rmid();
 
+	if (is_mbm_event(event->attr.config) && __rmid_valid(rmid))
+		init_mbm_sample(rmid, event->attr.config);
+
 	event->hw.cqm_rmid = rmid;
 }
 
@@ -893,7 +1055,10 @@ static void intel_cqm_event_read(struct perf_event *event)
 	if (!__rmid_valid(rmid))
 		goto out;
 
-	val = __rmid_read(rmid);
+	if (is_mbm_event(event->attr.config))
+		val = rmid_read_mbm(rmid, event->attr.config);
+	else
+		val = __rmid_read(rmid);
 
 	/*
 	 * Ignore this reading on error states and do not update the value.
@@ -924,10 +1089,100 @@ static inline bool cqm_group_leader(struct perf_event *event)
 	return !list_empty(&event->hw.cqm_groups_entry);
 }
 
+static void __intel_mbm_event_count(void *info)
+{
+	struct rmid_read *rr = info;
+	u64 val;
+
+	val = rmid_read_mbm(rr->rmid, rr->evt_type);
+	if (val & (RMID_VAL_ERROR | RMID_VAL_UNAVAIL))
+		return;
+	atomic64_add(val, &rr->value);
+}
+
+static enum hrtimer_restart mbm_hrtimer_handle(struct hrtimer *hrtimer)
+{
+	struct perf_event *iter, *iter1;
+	int ret = HRTIMER_RESTART;
+	struct list_head *head;
+	unsigned long flags;
+	u32 grp_rmid;
+
+	/*
+	 * Need to cache_lock as the timer Event Select MSR reads
+	 * can race with the mbm/cqm count() and mbm_init() reads.
+	 */
+	raw_spin_lock_irqsave(&cache_lock, flags);
+
+	if (list_empty(&cache_groups)) {
+		ret = HRTIMER_NORESTART;
+		goto out;
+	}
+
+	list_for_each_entry(iter, &cache_groups, hw.cqm_groups_entry) {
+		grp_rmid = iter->hw.cqm_rmid;
+		if (!__rmid_valid(grp_rmid))
+			continue;
+		if (is_mbm_event(iter->attr.config))
+			update_sample(grp_rmid, iter->attr.config, 0);
+
+		head = &iter->hw.cqm_group_entry;
+		if (list_empty(head))
+			continue;
+		list_for_each_entry(iter1, head, hw.cqm_group_entry) {
+			if (!iter1->hw.is_group_event)
+				break;
+			if (is_mbm_event(iter1->attr.config))
+				update_sample(iter1->hw.cqm_rmid,
+					      iter1->attr.config, 0);
+		}
+	}
+
+	hrtimer_forward_now(hrtimer, ms_to_ktime(MBM_CTR_OVERFLOW_TIME));
+out:
+	raw_spin_unlock_irqrestore(&cache_lock, flags);
+
+	return ret;
+}
+
+static void __mbm_start_timer(void *info)
+{
+	hrtimer_start(&mbm_timers[pkg_id], ms_to_ktime(MBM_CTR_OVERFLOW_TIME),
+			     HRTIMER_MODE_REL_PINNED);
+}
+
+static void __mbm_stop_timer(void *info)
+{
+	hrtimer_cancel(&mbm_timers[pkg_id]);
+}
+
+static void mbm_start_timers(void)
+{
+	on_each_cpu_mask(&cqm_cpumask, __mbm_start_timer, NULL, 1);
+}
+
+static void mbm_stop_timers(void)
+{
+	on_each_cpu_mask(&cqm_cpumask, __mbm_stop_timer, NULL, 1);
+}
+
+static void mbm_hrtimer_init(void)
+{
+	struct hrtimer *hr;
+	int i;
+
+	for (i = 0; i < mbm_socket_max; i++) {
+		hr = &mbm_timers[i];
+		hrtimer_init(hr, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		hr->function = mbm_hrtimer_handle;
+	}
+}
+
 static u64 intel_cqm_event_count(struct perf_event *event)
 {
 	unsigned long flags;
 	struct rmid_read rr = {
+		.evt_type = event->attr.config,
 		.value = ATOMIC64_INIT(0),
 	};
 
@@ -940,7 +1195,9 @@ static u64 intel_cqm_event_count(struct perf_event *event)
 		return __perf_event_count(event);
 
 	/*
-	 * Only the group leader gets to report values. This stops us
+	 * Only the group leader gets to report values except in case of
+	 * multiple events in the same group, we still need to read the
+	 * other events.This stops us
 	 * reporting duplicate values to userspace, and gives us a clear
 	 * rule for which task gets to report the values.
 	 *
@@ -948,7 +1205,7 @@ static u64 intel_cqm_event_count(struct perf_event *event)
 	 * specific packages - we forfeit that ability when we create
 	 * task events.
 	 */
-	if (!cqm_group_leader(event))
+	if (!cqm_group_leader(event) && !event->hw.is_group_event)
 		return 0;
 
 	/*
@@ -975,7 +1232,7 @@ static u64 intel_cqm_event_count(struct perf_event *event)
 	if (!__rmid_valid(rr.rmid))
 		goto out;
 
-	on_each_cpu_mask(&cqm_cpumask, __intel_cqm_event_count, &rr, 1);
+	cqm_mask_call(&rr);
 
 	raw_spin_lock_irqsave(&cache_lock, flags);
 	if (event->hw.cqm_rmid == rr.rmid)
@@ -1046,8 +1303,14 @@ static int intel_cqm_event_add(struct perf_event *event, int mode)
 static void intel_cqm_event_destroy(struct perf_event *event)
 {
 	struct perf_event *group_other = NULL;
+	unsigned long flags;
 
 	mutex_lock(&cache_mutex);
+	/*
+	* Hold the cache_lock as mbm timer handlers could be
+	* scanning the list of events.
+	*/
+	raw_spin_lock_irqsave(&cache_lock, flags);
 
 	/*
 	 * If there's another event in this group...
@@ -1079,6 +1342,14 @@ static void intel_cqm_event_destroy(struct perf_event *event)
 		}
 	}
 
+	raw_spin_unlock_irqrestore(&cache_lock, flags);
+
+	/*
+	 * Stop the mbm overflow timers when the last event is destroyed.
+	*/
+	if (mbm_enabled && list_empty(&cache_groups))
+		mbm_stop_timers();
+
 	mutex_unlock(&cache_mutex);
 }
 
@@ -1086,11 +1357,13 @@ static int intel_cqm_event_init(struct perf_event *event)
 {
 	struct perf_event *group = NULL;
 	bool rotate = false;
+	unsigned long flags;
 
 	if (event->attr.type != intel_cqm_pmu.type)
 		return -ENOENT;
 
-	if (event->attr.config & ~QOS_EVENT_MASK)
+	if ((event->attr.config < QOS_L3_OCCUP_EVENT_ID) ||
+	     (event->attr.config > QOS_MBM_LOCAL_EVENT_ID))
 		return -EINVAL;
 
 	/* unsupported modes and filters */
@@ -1110,9 +1383,21 @@ static int intel_cqm_event_init(struct perf_event *event)
 
 	mutex_lock(&cache_mutex);
 
+	/*
+	 * Start the mbm overflow timers when the first event is created.
+	*/
+	if (mbm_enabled && list_empty(&cache_groups))
+		mbm_start_timers();
+
 	/* Will also set rmid */
 	intel_cqm_setup_event(event, &group);
 
+	/*
+	* Hold the cache_lock as mbm timer handlers be
+	* scanning the list of events.
+	*/
+	raw_spin_lock_irqsave(&cache_lock, flags);
+
 	if (group) {
 		list_add_tail(&event->hw.cqm_group_entry,
 			      &group->hw.cqm_group_entry);
@@ -1131,6 +1416,7 @@ static int intel_cqm_event_init(struct perf_event *event)
 			rotate = true;
 	}
 
+	raw_spin_unlock_irqrestore(&cache_lock, flags);
 	mutex_unlock(&cache_mutex);
 
 	if (rotate)
@@ -1145,6 +1431,16 @@ EVENT_ATTR_STR(llc_occupancy.unit, intel_cqm_llc_unit, "Bytes");
 EVENT_ATTR_STR(llc_occupancy.scale, intel_cqm_llc_scale, NULL);
 EVENT_ATTR_STR(llc_occupancy.snapshot, intel_cqm_llc_snapshot, "1");
 
+EVENT_ATTR_STR(total_bytes, intel_cqm_total_bytes, "event=0x02");
+EVENT_ATTR_STR(total_bytes.per-pkg, intel_cqm_total_bytes_pkg, "1");
+EVENT_ATTR_STR(total_bytes.unit, intel_cqm_total_bytes_unit, "MB");
+EVENT_ATTR_STR(total_bytes.scale, intel_cqm_total_bytes_scale, "1e-6");
+
+EVENT_ATTR_STR(local_bytes, intel_cqm_local_bytes, "event=0x03");
+EVENT_ATTR_STR(local_bytes.per-pkg, intel_cqm_local_bytes_pkg, "1");
+EVENT_ATTR_STR(local_bytes.unit, intel_cqm_local_bytes_unit, "MB");
+EVENT_ATTR_STR(local_bytes.scale, intel_cqm_local_bytes_scale, "1e-6");
+
 static struct attribute *intel_cqm_events_attr[] = {
 	EVENT_PTR(intel_cqm_llc),
 	EVENT_PTR(intel_cqm_llc_pkg),
@@ -1154,9 +1450,38 @@ static struct attribute *intel_cqm_events_attr[] = {
 	NULL,
 };
 
+static struct attribute *intel_mbm_events_attr[] = {
+	EVENT_PTR(intel_cqm_total_bytes),
+	EVENT_PTR(intel_cqm_local_bytes),
+	EVENT_PTR(intel_cqm_total_bytes_pkg),
+	EVENT_PTR(intel_cqm_local_bytes_pkg),
+	EVENT_PTR(intel_cqm_total_bytes_unit),
+	EVENT_PTR(intel_cqm_local_bytes_unit),
+	EVENT_PTR(intel_cqm_total_bytes_scale),
+	EVENT_PTR(intel_cqm_local_bytes_scale),
+	NULL,
+};
+
+static struct attribute *intel_cmt_mbm_events_attr[] = {
+	EVENT_PTR(intel_cqm_llc),
+	EVENT_PTR(intel_cqm_total_bytes),
+	EVENT_PTR(intel_cqm_local_bytes),
+	EVENT_PTR(intel_cqm_llc_pkg),
+	EVENT_PTR(intel_cqm_total_bytes_pkg),
+	EVENT_PTR(intel_cqm_local_bytes_pkg),
+	EVENT_PTR(intel_cqm_llc_unit),
+	EVENT_PTR(intel_cqm_total_bytes_unit),
+	EVENT_PTR(intel_cqm_local_bytes_unit),
+	EVENT_PTR(intel_cqm_llc_scale),
+	EVENT_PTR(intel_cqm_total_bytes_scale),
+	EVENT_PTR(intel_cqm_local_bytes_scale),
+	EVENT_PTR(intel_cqm_llc_snapshot),
+	NULL,
+};
+
 static struct attribute_group intel_cqm_events_group = {
 	.name = "events",
-	.attrs = intel_cqm_events_attr,
+	.attrs = NULL,
 };
 
 PMU_FORMAT_ATTR(event, "config:0-7");
@@ -1244,15 +1569,12 @@ static struct pmu intel_cqm_pmu = {
 
 static inline void cqm_pick_event_reader(int cpu)
 {
-	int phys_id = topology_physical_package_id(cpu);
-	int i;
-
-	for_each_cpu(i, &cqm_cpumask) {
-		if (phys_id == topology_physical_package_id(i))
-			return;	/* already got reader for this socket */
-	}
+	int reader;
 
-	cpumask_set_cpu(cpu, &cqm_cpumask);
+	/* First online cpu in package becomes the reader */
+	reader = cpumask_any_and(&cqm_cpumask, topology_core_cpumask(cpu));
+	if (reader >= nr_cpu_ids)
+		cpumask_set_cpu(cpu, &cqm_cpumask);
 }
 
 static void intel_cqm_cpu_starting(unsigned int cpu)
@@ -1270,24 +1592,17 @@ static void intel_cqm_cpu_starting(unsigned int cpu)
 
 static void intel_cqm_cpu_exit(unsigned int cpu)
 {
-	int phys_id = topology_physical_package_id(cpu);
-	int i;
+	int target;
 
-	/*
-	 * Is @cpu a designated cqm reader?
-	 */
+	/* Is @cpu the current cqm reader for this package ? */
 	if (!cpumask_test_and_clear_cpu(cpu, &cqm_cpumask))
 		return;
 
-	for_each_online_cpu(i) {
-		if (i == cpu)
-			continue;
+	/* Find another online reader in this package */
+	target = cpumask_any_but(topology_core_cpumask(cpu), cpu);
 
-		if (phys_id == topology_physical_package_id(i)) {
-			cpumask_set_cpu(i, &cqm_cpumask);
-			break;
-		}
-	}
+	if (target < nr_cpu_ids)
+		cpumask_set_cpu(target, &cqm_cpumask);
 }
 
 static int intel_cqm_cpu_notifier(struct notifier_block *nb,
@@ -1313,12 +1628,70 @@ static const struct x86_cpu_id intel_cqm_match[] = {
 	{}
 };
 
+static void mbm_cleanup(void)
+{
+	if (!mbm_enabled)
+		return;
+
+	kfree(mbm_local);
+	kfree(mbm_total);
+	mbm_enabled = false;
+}
+
+static const struct x86_cpu_id intel_mbm_local_match[] = {
+	{ .vendor = X86_VENDOR_INTEL, .feature = X86_FEATURE_CQM_MBM_LOCAL },
+	{}
+};
+
+static const struct x86_cpu_id intel_mbm_total_match[] = {
+	{ .vendor = X86_VENDOR_INTEL, .feature = X86_FEATURE_CQM_MBM_TOTAL },
+	{}
+};
+
+static int intel_mbm_init(void)
+{
+	int ret = 0, array_size, maxid = cqm_max_rmid + 1;
+
+	mbm_socket_max = topology_max_packages();
+	array_size = sizeof(struct sample) * maxid * mbm_socket_max;
+	mbm_local = kmalloc(array_size, GFP_KERNEL);
+	if (!mbm_local)
+		return -ENOMEM;
+
+	mbm_total = kmalloc(array_size, GFP_KERNEL);
+	if (!mbm_total) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	array_size = sizeof(struct hrtimer) * mbm_socket_max;
+	mbm_timers = kmalloc(array_size, GFP_KERNEL);
+	if (!mbm_timers) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	mbm_hrtimer_init();
+
+out:
+	if (ret)
+		mbm_cleanup();
+
+	return ret;
+}
+
 static int __init intel_cqm_init(void)
 {
-	char *str, scale[20];
+	char *str = NULL, scale[20];
 	int i, cpu, ret;
 
-	if (!x86_match_cpu(intel_cqm_match))
+	if (x86_match_cpu(intel_cqm_match))
+		cqm_enabled = true;
+
+	if (x86_match_cpu(intel_mbm_local_match) &&
+	     x86_match_cpu(intel_mbm_total_match))
+		mbm_enabled = true;
+
+	if (!cqm_enabled && !mbm_enabled)
 		return -ENODEV;
 
 	cqm_l3_scale = boot_cpu_data.x86_cache_occ_scale;
@@ -1375,16 +1748,41 @@ static int __init intel_cqm_init(void)
 		cqm_pick_event_reader(i);
 	}
 
-	__perf_cpu_notifier(intel_cqm_cpu_notifier);
+	if (mbm_enabled)
+		ret = intel_mbm_init();
+	if (ret && !cqm_enabled)
+		goto out;
+
+	if (cqm_enabled && mbm_enabled)
+		intel_cqm_events_group.attrs = intel_cmt_mbm_events_attr;
+	else if (!cqm_enabled && mbm_enabled)
+		intel_cqm_events_group.attrs = intel_mbm_events_attr;
+	else if (cqm_enabled && !mbm_enabled)
+		intel_cqm_events_group.attrs = intel_cqm_events_attr;
 
 	ret = perf_pmu_register(&intel_cqm_pmu, "intel_cqm", -1);
-	if (ret)
+	if (ret) {
 		pr_err("Intel CQM perf registration failed: %d\n", ret);
-	else
+		goto out;
+	}
+
+	if (cqm_enabled)
 		pr_info("Intel CQM monitoring enabled\n");
+	if (mbm_enabled)
+		pr_info("Intel MBM enabled\n");
 
+	/*
+	 * Register the hot cpu notifier once we are sure cqm
+	 * is enabled to avoid notifier leak.
+	 */
+	__perf_cpu_notifier(intel_cqm_cpu_notifier);
 out:
 	cpu_notifier_register_done();
+	if (ret) {
+		kfree(str);
+		cqm_cleanup();
+		mbm_cleanup();
+	}
 
 	return ret;
 }
diff --git a/arch/x86/kernel/cpu/perf_event_intel_cstate.c b/arch/x86/events/intel/cstate.c
index 75a38b5a2e26..7946c4231169 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_cstate.c
+++ b/arch/x86/events/intel/cstate.c
@@ -89,7 +89,7 @@
 #include <linux/slab.h>
 #include <linux/perf_event.h>
 #include <asm/cpu_device_id.h>
-#include "perf_event.h"
+#include "../perf_event.h"
 
 #define DEFINE_CSTATE_FORMAT_ATTR(_var, _name, _format)		\
 static ssize_t __cstate_##_var##_show(struct kobject *kobj,	\
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/events/intel/ds.c
index 5db1c7755548..8584b90d8e0b 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -5,7 +5,7 @@
 #include <asm/perf_event.h>
 #include <asm/insn.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 /* The size of a BTS record in bytes: */
 #define BTS_RECORD_SIZE		24
@@ -51,7 +51,8 @@ union intel_x86_pebs_dse {
 #define OP_LH (P(OP, LOAD) | P(LVL, HIT))
 #define SNOOP_NONE_MISS (P(SNOOP, NONE) | P(SNOOP, MISS))
 
-static const u64 pebs_data_source[] = {
+/* Version for Sandy Bridge and later */
+static u64 pebs_data_source[] = {
 	P(OP, LOAD) | P(LVL, MISS) | P(LVL, L3) | P(SNOOP, NA),/* 0x00:ukn L3 */
 	OP_LH | P(LVL, L1)  | P(SNOOP, NONE),	/* 0x01: L1 local */
 	OP_LH | P(LVL, LFB) | P(SNOOP, NONE),	/* 0x02: LFB hit */
@@ -70,6 +71,14 @@ static const u64 pebs_data_source[] = {
 	OP_LH | P(LVL, UNC) | P(SNOOP, NONE), /* 0x0f: uncached */
 };
 
+/* Patch up minor differences in the bits */
+void __init intel_pmu_pebs_data_source_nhm(void)
+{
+	pebs_data_source[0x05] = OP_LH | P(LVL, L3)  | P(SNOOP, HIT);
+	pebs_data_source[0x06] = OP_LH | P(LVL, L3)  | P(SNOOP, HITM);
+	pebs_data_source[0x07] = OP_LH | P(LVL, L3)  | P(SNOOP, HITM);
+}
+
 static u64 precise_store_data(u64 status)
 {
 	union intel_x86_pebs_dse dse;
@@ -269,7 +278,7 @@ static int alloc_pebs_buffer(int cpu)
 	if (!x86_pmu.pebs)
 		return 0;
 
-	buffer = kzalloc_node(PEBS_BUFFER_SIZE, GFP_KERNEL, node);
+	buffer = kzalloc_node(x86_pmu.pebs_buffer_size, GFP_KERNEL, node);
 	if (unlikely(!buffer))
 		return -ENOMEM;
 
@@ -286,7 +295,7 @@ static int alloc_pebs_buffer(int cpu)
 		per_cpu(insn_buffer, cpu) = ibuffer;
 	}
 
-	max = PEBS_BUFFER_SIZE / x86_pmu.pebs_record_size;
+	max = x86_pmu.pebs_buffer_size / x86_pmu.pebs_record_size;
 
 	ds->pebs_buffer_base = (u64)(unsigned long)buffer;
 	ds->pebs_index = ds->pebs_buffer_base;
@@ -561,11 +570,12 @@ int intel_pmu_drain_bts_buffer(void)
 	 * We will overwrite the from and to address before we output
 	 * the sample.
 	 */
+	rcu_read_lock();
 	perf_prepare_sample(&header, &data, event, &regs);
 
 	if (perf_output_begin(&handle, event, header.size *
 			      (top - base - skip)))
-		return 1;
+		goto unlock;
 
 	for (at = base; at < top; at++) {
 		/* Filter out any records that contain kernel addresses. */
@@ -584,6 +594,8 @@ int intel_pmu_drain_bts_buffer(void)
 	/* There's new data available. */
 	event->hw.interrupts++;
 	event->pending_kill = POLL_IN;
+unlock:
+	rcu_read_unlock();
 	return 1;
 }
 
@@ -620,6 +632,8 @@ struct event_constraint intel_atom_pebs_event_constraints[] = {
 	INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1),    /* MEM_LOAD_RETIRED.* */
 	/* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x01),
+	/* Allow all events as PEBS with no flags */
+	INTEL_ALL_EVENT_CONSTRAINT(0, 0x1),
 	EVENT_CONSTRAINT_END
 };
 
@@ -686,6 +700,8 @@ struct event_constraint intel_ivb_pebs_event_constraints[] = {
 	INTEL_PST_CONSTRAINT(0x02cd, 0x8),    /* MEM_TRANS_RETIRED.PRECISE_STORES */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
+	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_EXCLEVT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EXCLEVT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
@@ -700,6 +716,8 @@ struct event_constraint intel_hsw_pebs_event_constraints[] = {
 	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
+	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_XLD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
@@ -716,11 +734,36 @@ struct event_constraint intel_hsw_pebs_event_constraints[] = {
 	EVENT_CONSTRAINT_END
 };
 
-struct event_constraint intel_skl_pebs_event_constraints[] = {
-	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x2),	/* INST_RETIRED.PREC_DIST */
-	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
+struct event_constraint intel_bdw_pebs_event_constraints[] = {
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
+	INTEL_PLD_CONSTRAINT(0x01cd, 0xf),    /* MEM_TRANS_RETIRED.* */
 	/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
 	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
+	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
+	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(0x01c2, 0xf), /* UOPS_RETIRED.ALL */
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_LOADS */
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x21d0, 0xf), /* MEM_UOPS_RETIRED.LOCK_LOADS */
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x41d0, 0xf), /* MEM_UOPS_RETIRED.SPLIT_LOADS */
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x81d0, 0xf), /* MEM_UOPS_RETIRED.ALL_LOADS */
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x12d0, 0xf), /* MEM_UOPS_RETIRED.STLB_MISS_STORES */
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x42d0, 0xf), /* MEM_UOPS_RETIRED.SPLIT_STORES */
+	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x82d0, 0xf), /* MEM_UOPS_RETIRED.ALL_STORES */
+	INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_LD(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
+	INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_LD(0xd2, 0xf),    /* MEM_LOAD_UOPS_L3_HIT_RETIRED.* */
+	INTEL_FLAGS_EVENT_CONSTRAINT_DATALA_LD(0xd3, 0xf),    /* MEM_LOAD_UOPS_L3_MISS_RETIRED.* */
+	/* Allow all events as PEBS with no flags */
+	INTEL_ALL_EVENT_CONSTRAINT(0, 0xf),
+	EVENT_CONSTRAINT_END
+};
+
+
+struct event_constraint intel_skl_pebs_event_constraints[] = {
+	INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x2),	/* INST_RETIRED.PREC_DIST */
+	/* INST_RETIRED.PREC_DIST, inv=1, cmask=16 (cycles:ppp). */
+	INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c0, 0x2),
+	/* INST_RETIRED.TOTAL_CYCLES_PS (inv=1, cmask=16) (cycles:p). */
+	INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x0f),
 	INTEL_PLD_CONSTRAINT(0x1cd, 0xf),		      /* MEM_TRANS_RETIRED.* */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x11d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_LOADS */
 	INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_ST(0x12d0, 0xf), /* MEM_INST_RETIRED.STLB_MISS_STORES */
@@ -1101,6 +1144,13 @@ get_next_pebs_record_by_bit(void *base, void *top, int bit)
 	void *at;
 	u64 pebs_status;
 
+	/*
+	 * fmt0 does not have a status bitfield (does not use
+	 * perf_record_nhm format)
+	 */
+	if (x86_pmu.intel_cap.pebs_format < 1)
+		return base;
+
 	if (base == NULL)
 		return NULL;
 
@@ -1186,7 +1236,7 @@ static void intel_pmu_drain_pebs_core(struct pt_regs *iregs)
 	if (!event->attr.precise_ip)
 		return;
 
-	n = (top - at) / x86_pmu.pebs_record_size;
+	n = top - at;
 	if (n <= 0)
 		return;
 
@@ -1230,12 +1280,21 @@ static void intel_pmu_drain_pebs_nhm(struct pt_regs *iregs)
 		pebs_status = p->status & cpuc->pebs_enabled;
 		pebs_status &= (1ULL << x86_pmu.max_pebs_events) - 1;
 
+		/*
+		 * On some CPUs the PEBS status can be zero when PEBS is
+		 * racing with clearing of GLOBAL_STATUS.
+		 *
+		 * Normally we would drop that record, but in the
+		 * case when there is only a single active PEBS event
+		 * we can assume it's for that event.
+		 */
+		if (!pebs_status && cpuc->pebs_enabled &&
+			!(cpuc->pebs_enabled & (cpuc->pebs_enabled-1)))
+			pebs_status = cpuc->pebs_enabled;
+
 		bit = find_first_bit((unsigned long *)&pebs_status,
 					x86_pmu.max_pebs_events);
-		if (WARN(bit >= x86_pmu.max_pebs_events,
-			 "PEBS record without PEBS event! status=%Lx pebs_enabled=%Lx active_mask=%Lx",
-			 (unsigned long long)p->status, (unsigned long long)cpuc->pebs_enabled,
-			 *(unsigned long long *)cpuc->active_mask))
+		if (bit >= x86_pmu.max_pebs_events)
 			continue;
 
 		/*
@@ -1296,19 +1355,28 @@ void __init intel_ds_init(void)
 
 	x86_pmu.bts  = boot_cpu_has(X86_FEATURE_BTS);
 	x86_pmu.pebs = boot_cpu_has(X86_FEATURE_PEBS);
+	x86_pmu.pebs_buffer_size = PEBS_BUFFER_SIZE;
 	if (x86_pmu.pebs) {
 		char pebs_type = x86_pmu.intel_cap.pebs_trap ?  '+' : '-';
 		int format = x86_pmu.intel_cap.pebs_format;
 
 		switch (format) {
 		case 0:
-			printk(KERN_CONT "PEBS fmt0%c, ", pebs_type);
+			pr_cont("PEBS fmt0%c, ", pebs_type);
 			x86_pmu.pebs_record_size = sizeof(struct pebs_record_core);
+			/*
+			 * Using >PAGE_SIZE buffers makes the WRMSR to
+			 * PERF_GLOBAL_CTRL in intel_pmu_enable_all()
+			 * mysteriously hang on Core2.
+			 *
+			 * As a workaround, we don't do this.
+			 */
+			x86_pmu.pebs_buffer_size = PAGE_SIZE;
 			x86_pmu.drain_pebs = intel_pmu_drain_pebs_core;
 			break;
 
 		case 1:
-			printk(KERN_CONT "PEBS fmt1%c, ", pebs_type);
+			pr_cont("PEBS fmt1%c, ", pebs_type);
 			x86_pmu.pebs_record_size = sizeof(struct pebs_record_nhm);
 			x86_pmu.drain_pebs = intel_pmu_drain_pebs_nhm;
 			break;
@@ -1328,7 +1396,7 @@ void __init intel_ds_init(void)
 			break;
 
 		default:
-			printk(KERN_CONT "no PEBS fmt%d%c, ", format, pebs_type);
+			pr_cont("no PEBS fmt%d%c, ", format, pebs_type);
 			x86_pmu.pebs = 0;
 		}
 	}
diff --git a/arch/x86/kernel/cpu/perf_event_knc.c b/arch/x86/events/intel/knc.c
index 5b0c232d1ee6..548d5f774b07 100644
--- a/arch/x86/kernel/cpu/perf_event_knc.c
+++ b/arch/x86/events/intel/knc.c
@@ -5,7 +5,7 @@
 
 #include <asm/hardirq.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 static const u64 knc_perfmon_event_map[] =
 {
@@ -263,7 +263,9 @@ again:
 		goto again;
 
 done:
-	knc_pmu_enable_all(0);
+	/* Only restore PMU state when it's active. See x86_pmu_disable(). */
+	if (cpuc->enabled)
+		knc_pmu_enable_all(0);
 
 	return handled;
 }
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/events/intel/lbr.c
index bfd0b717e944..6c3b7c1780c9 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -5,7 +5,7 @@
 #include <asm/msr.h>
 #include <asm/insn.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 enum {
 	LBR_FORMAT_32		= 0x00,
@@ -42,6 +42,13 @@ static enum {
 #define LBR_FAR_BIT		8 /* do not capture far branches */
 #define LBR_CALL_STACK_BIT	9 /* enable call stack */
 
+/*
+ * Following bit only exists in Linux; we mask it out before writing it to
+ * the actual MSR. But it helps the constraint perf code to understand
+ * that this is a separate configuration.
+ */
+#define LBR_NO_INFO_BIT	       63 /* don't read LBR_INFO. */
+
 #define LBR_KERNEL	(1 << LBR_KERNEL_BIT)
 #define LBR_USER	(1 << LBR_USER_BIT)
 #define LBR_JCC		(1 << LBR_JCC_BIT)
@@ -52,6 +59,7 @@ static enum {
 #define LBR_IND_JMP	(1 << LBR_IND_JMP_BIT)
 #define LBR_FAR		(1 << LBR_FAR_BIT)
 #define LBR_CALL_STACK	(1 << LBR_CALL_STACK_BIT)
+#define LBR_NO_INFO	(1ULL << LBR_NO_INFO_BIT)
 
 #define LBR_PLM (LBR_KERNEL | LBR_USER)
 
@@ -152,8 +160,8 @@ static void __intel_pmu_lbr_enable(bool pmi)
 	 * did not change.
 	 */
 	if (cpuc->lbr_sel)
-		lbr_select = cpuc->lbr_sel->config;
-	if (!pmi)
+		lbr_select = cpuc->lbr_sel->config & x86_pmu.lbr_sel_mask;
+	if (!pmi && cpuc->lbr_sel)
 		wrmsrl(MSR_LBR_SELECT, lbr_select);
 
 	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
@@ -239,7 +247,7 @@ static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx)
 	}
 
 	mask = x86_pmu.lbr_nr - 1;
-	tos = intel_pmu_lbr_tos();
+	tos = task_ctx->tos;
 	for (i = 0; i < tos; i++) {
 		lbr_idx = (tos - i) & mask;
 		wrmsrl(x86_pmu.lbr_from + lbr_idx, task_ctx->lbr_from[i]);
@@ -247,6 +255,7 @@ static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx)
 		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
 			wrmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]);
 	}
+	wrmsrl(x86_pmu.lbr_tos, tos);
 	task_ctx->lbr_stack_state = LBR_NONE;
 }
 
@@ -270,6 +279,7 @@ static void __intel_pmu_lbr_save(struct x86_perf_task_context *task_ctx)
 		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
 			rdmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]);
 	}
+	task_ctx->tos = tos;
 	task_ctx->lbr_stack_state = LBR_VALID;
 }
 
@@ -420,6 +430,7 @@ static void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)
  */
 static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 {
+	bool need_info = false;
 	unsigned long mask = x86_pmu.lbr_nr - 1;
 	int lbr_format = x86_pmu.intel_cap.lbr_format;
 	u64 tos = intel_pmu_lbr_tos();
@@ -427,8 +438,11 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 	int out = 0;
 	int num = x86_pmu.lbr_nr;
 
-	if (cpuc->lbr_sel->config & LBR_CALL_STACK)
-		num = tos;
+	if (cpuc->lbr_sel) {
+		need_info = !(cpuc->lbr_sel->config & LBR_NO_INFO);
+		if (cpuc->lbr_sel->config & LBR_CALL_STACK)
+			num = tos;
+	}
 
 	for (i = 0; i < num; i++) {
 		unsigned long lbr_idx = (tos - i) & mask;
@@ -440,7 +454,7 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 		rdmsrl(x86_pmu.lbr_from + lbr_idx, from);
 		rdmsrl(x86_pmu.lbr_to   + lbr_idx, to);
 
-		if (lbr_format == LBR_FORMAT_INFO) {
+		if (lbr_format == LBR_FORMAT_INFO && need_info) {
 			u64 info;
 
 			rdmsrl(MSR_LBR_INFO_0 + lbr_idx, info);
@@ -588,6 +602,7 @@ static int intel_pmu_setup_hw_lbr_filter(struct perf_event *event)
 		if (v != LBR_IGN)
 			mask |= v;
 	}
+
 	reg = &event->hw.branch_reg;
 	reg->idx = EXTRA_REG_LBR;
 
@@ -598,6 +613,11 @@ static int intel_pmu_setup_hw_lbr_filter(struct perf_event *event)
 	 */
 	reg->config = mask ^ x86_pmu.lbr_sel_mask;
 
+	if ((br_type & PERF_SAMPLE_BRANCH_NO_CYCLES) &&
+	    (br_type & PERF_SAMPLE_BRANCH_NO_FLAGS) &&
+	    (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO))
+		reg->config |= LBR_NO_INFO;
+
 	return 0;
 }
 
@@ -629,7 +649,7 @@ int intel_pmu_setup_lbr_filter(struct perf_event *event)
 
 /*
  * return the type of control flow change at address "from"
- * intruction is not necessarily a branch (in case of interrupt).
+ * instruction is not necessarily a branch (in case of interrupt).
  *
  * The branch type returned also includes the priv level of the
  * target of the control flow change (X86_BR_USER, X86_BR_KERNEL).
@@ -1026,3 +1046,17 @@ void __init intel_pmu_lbr_init_atom(void)
 	 */
 	pr_cont("8-deep LBR, ");
 }
+
+/* Knights Landing */
+void intel_pmu_lbr_init_knl(void)
+{
+	x86_pmu.lbr_nr	   = 8;
+	x86_pmu.lbr_tos    = MSR_LBR_TOS;
+	x86_pmu.lbr_from   = MSR_LBR_NHM_FROM;
+	x86_pmu.lbr_to     = MSR_LBR_NHM_TO;
+
+	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
+	x86_pmu.lbr_sel_map  = snb_lbr_sel_map;
+
+	pr_cont("8-deep LBR, ");
+}
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/events/intel/p4.c
index f2e56783af3d..0a5ede187d9c 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/events/intel/p4.c
@@ -13,7 +13,7 @@
 #include <asm/hardirq.h>
 #include <asm/apic.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 #define P4_CNTR_LIMIT 3
 /*
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/events/intel/p6.c
index 7c1a0c07b607..1f5c47ab4c65 100644
--- a/arch/x86/kernel/cpu/perf_event_p6.c
+++ b/arch/x86/events/intel/p6.c
@@ -1,7 +1,7 @@
 #include <linux/perf_event.h>
 #include <linux/types.h>
 
-#include "perf_event.h"
+#include "../perf_event.h"
 
 /*
  * Not sure about some of these
diff --git a/arch/x86/kernel/cpu/perf_event_intel_pt.c b/arch/x86/events/intel/pt.c
index 868e1194337f..6af7cf71d6b2 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -27,9 +27,10 @@
 #include <asm/perf_event.h>
 #include <asm/insn.h>
 #include <asm/io.h>
+#include <asm/intel_pt.h>
 
-#include "perf_event.h"
-#include "intel_pt.h"
+#include "../perf_event.h"
+#include "pt.h"
 
 static DEFINE_PER_CPU(struct pt, pt_ctx);
 
@@ -1122,6 +1123,14 @@ static int pt_event_init(struct perf_event *event)
 	return 0;
 }
 
+void cpu_emergency_stop_pt(void)
+{
+	struct pt *pt = this_cpu_ptr(&pt_ctx);
+
+	if (pt->handle.event)
+		pt_event_stop(pt->handle.event, PERF_EF_UPDATE);
+}
+
 static __init int pt_init(void)
 {
 	int ret, cpu, prior_warn = 0;
diff --git a/arch/x86/kernel/cpu/intel_pt.h b/arch/x86/events/intel/pt.h
index 336878a5d205..336878a5d205 100644
--- a/arch/x86/kernel/cpu/intel_pt.h
+++ b/arch/x86/events/intel/pt.h
diff --git a/arch/x86/kernel/cpu/perf_event_intel_rapl.c b/arch/x86/events/intel/rapl.c
index 81431c0f0614..70c93f9b03ac 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_rapl.c
+++ b/arch/x86/events/intel/rapl.c
@@ -44,11 +44,14 @@
  * the duration of the measurement. Tools may use a function such as
  * ldexp(raw_count, -32);
  */
+
+#define pr_fmt(fmt) "RAPL PMU: " fmt
+
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/perf_event.h>
 #include <asm/cpu_device_id.h>
-#include "perf_event.h"
+#include "../perf_event.h"
 
 /*
  * RAPL energy status counters
@@ -63,7 +66,7 @@
 #define INTEL_RAPL_PP1		0x4	/* pseudo-encoding */
 
 #define NR_RAPL_DOMAINS         0x4
-static const char *rapl_domain_names[NR_RAPL_DOMAINS] __initconst = {
+static const char *const rapl_domain_names[NR_RAPL_DOMAINS] __initconst = {
 	"pp0-core",
 	"package",
 	"dram",
@@ -107,39 +110,43 @@ static ssize_t __rapl_##_var##_show(struct kobject *kobj,	\
 static struct kobj_attribute format_attr_##_var =		\
 	__ATTR(_name, 0444, __rapl_##_var##_show, NULL)
 
-#define RAPL_EVENT_DESC(_name, _config)				\
-{								\
-	.attr	= __ATTR(_name, 0444, rapl_event_show, NULL),	\
-	.config	= _config,					\
-}
-
-#define RAPL_CNTR_WIDTH 32 /* 32-bit rapl counters */
+#define RAPL_CNTR_WIDTH 32
 
-#define RAPL_EVENT_ATTR_STR(_name, v, str)				\
-static struct perf_pmu_events_attr event_attr_##v = {			\
-	.attr		= __ATTR(_name, 0444, rapl_sysfs_show, NULL),	\
-	.id		= 0,						\
-	.event_str	= str,						\
+#define RAPL_EVENT_ATTR_STR(_name, v, str)					\
+static struct perf_pmu_events_attr event_attr_##v = {				\
+	.attr		= __ATTR(_name, 0444, perf_event_sysfs_show, NULL),	\
+	.id		= 0,							\
+	.event_str	= str,							\
 };
 
 struct rapl_pmu {
-	spinlock_t	 lock;
-	int		 n_active; /* number of active events */
-	struct list_head active_list;
-	struct pmu	 *pmu; /* pointer to rapl_pmu_class */
-	ktime_t		 timer_interval; /* in ktime_t unit */
-	struct hrtimer   hrtimer;
+	raw_spinlock_t		lock;
+	int			n_active;
+	int			cpu;
+	struct list_head	active_list;
+	struct pmu		*pmu;
+	ktime_t			timer_interval;
+	struct hrtimer		hrtimer;
 };
 
-static int rapl_hw_unit[NR_RAPL_DOMAINS] __read_mostly;  /* 1/2^hw_unit Joule */
-static struct pmu rapl_pmu_class;
+struct rapl_pmus {
+	struct pmu		pmu;
+	unsigned int		maxpkg;
+	struct rapl_pmu		*pmus[];
+};
+
+ /* 1/2^hw_unit Joule */
+static int rapl_hw_unit[NR_RAPL_DOMAINS] __read_mostly;
+static struct rapl_pmus *rapl_pmus;
 static cpumask_t rapl_cpu_mask;
-static int rapl_cntr_mask;
+static unsigned int rapl_cntr_mask;
+static u64 rapl_timer_ms;
 
-static DEFINE_PER_CPU(struct rapl_pmu *, rapl_pmu);
-static DEFINE_PER_CPU(struct rapl_pmu *, rapl_pmu_to_free);
+static inline struct rapl_pmu *cpu_to_rapl_pmu(unsigned int cpu)
+{
+	return rapl_pmus->pmus[topology_logical_package_id(cpu)];
+}
 
-static struct x86_pmu_quirk *rapl_quirks;
 static inline u64 rapl_read_counter(struct perf_event *event)
 {
 	u64 raw;
@@ -147,19 +154,10 @@ static inline u64 rapl_read_counter(struct perf_event *event)
 	return raw;
 }
 
-#define rapl_add_quirk(func_)						\
-do {									\
-	static struct x86_pmu_quirk __quirk __initdata = {		\
-		.func = func_,						\
-	};								\
-	__quirk.next = rapl_quirks;					\
-	rapl_quirks = &__quirk;						\
-} while (0)
-
 static inline u64 rapl_scale(u64 v, int cfg)
 {
 	if (cfg > NR_RAPL_DOMAINS) {
-		pr_warn("invalid domain %d, failed to scale data\n", cfg);
+		pr_warn("Invalid domain %d, failed to scale data\n", cfg);
 		return v;
 	}
 	/*
@@ -212,27 +210,21 @@ static void rapl_start_hrtimer(struct rapl_pmu *pmu)
 		     HRTIMER_MODE_REL_PINNED);
 }
 
-static void rapl_stop_hrtimer(struct rapl_pmu *pmu)
-{
-	hrtimer_cancel(&pmu->hrtimer);
-}
-
 static enum hrtimer_restart rapl_hrtimer_handle(struct hrtimer *hrtimer)
 {
-	struct rapl_pmu *pmu = __this_cpu_read(rapl_pmu);
+	struct rapl_pmu *pmu = container_of(hrtimer, struct rapl_pmu, hrtimer);
 	struct perf_event *event;
 	unsigned long flags;
 
 	if (!pmu->n_active)
 		return HRTIMER_NORESTART;
 
-	spin_lock_irqsave(&pmu->lock, flags);
+	raw_spin_lock_irqsave(&pmu->lock, flags);
 
-	list_for_each_entry(event, &pmu->active_list, active_entry) {
+	list_for_each_entry(event, &pmu->active_list, active_entry)
 		rapl_event_update(event);
-	}
 
-	spin_unlock_irqrestore(&pmu->lock, flags);
+	raw_spin_unlock_irqrestore(&pmu->lock, flags);
 
 	hrtimer_forward_now(hrtimer, pmu->timer_interval);
 
@@ -266,28 +258,28 @@ static void __rapl_pmu_event_start(struct rapl_pmu *pmu,
 
 static void rapl_pmu_event_start(struct perf_event *event, int mode)
 {
-	struct rapl_pmu *pmu = __this_cpu_read(rapl_pmu);
+	struct rapl_pmu *pmu = event->pmu_private;
 	unsigned long flags;
 
-	spin_lock_irqsave(&pmu->lock, flags);
+	raw_spin_lock_irqsave(&pmu->lock, flags);
 	__rapl_pmu_event_start(pmu, event);
-	spin_unlock_irqrestore(&pmu->lock, flags);
+	raw_spin_unlock_irqrestore(&pmu->lock, flags);
 }
 
 static void rapl_pmu_event_stop(struct perf_event *event, int mode)
 {
-	struct rapl_pmu *pmu = __this_cpu_read(rapl_pmu);
+	struct rapl_pmu *pmu = event->pmu_private;
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned long flags;
 
-	spin_lock_irqsave(&pmu->lock, flags);
+	raw_spin_lock_irqsave(&pmu->lock, flags);
 
 	/* mark event as deactivated and stopped */
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		WARN_ON_ONCE(pmu->n_active <= 0);
 		pmu->n_active--;
 		if (pmu->n_active == 0)
-			rapl_stop_hrtimer(pmu);
+			hrtimer_cancel(&pmu->hrtimer);
 
 		list_del(&event->active_entry);
 
@@ -305,23 +297,23 @@ static void rapl_pmu_event_stop(struct perf_event *event, int mode)
 		hwc->state |= PERF_HES_UPTODATE;
 	}
 
-	spin_unlock_irqrestore(&pmu->lock, flags);
+	raw_spin_unlock_irqrestore(&pmu->lock, flags);
 }
 
 static int rapl_pmu_event_add(struct perf_event *event, int mode)
 {
-	struct rapl_pmu *pmu = __this_cpu_read(rapl_pmu);
+	struct rapl_pmu *pmu = event->pmu_private;
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned long flags;
 
-	spin_lock_irqsave(&pmu->lock, flags);
+	raw_spin_lock_irqsave(&pmu->lock, flags);
 
 	hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
 
 	if (mode & PERF_EF_START)
 		__rapl_pmu_event_start(pmu, event);
 
-	spin_unlock_irqrestore(&pmu->lock, flags);
+	raw_spin_unlock_irqrestore(&pmu->lock, flags);
 
 	return 0;
 }
@@ -335,15 +327,19 @@ static int rapl_pmu_event_init(struct perf_event *event)
 {
 	u64 cfg = event->attr.config & RAPL_EVENT_MASK;
 	int bit, msr, ret = 0;
+	struct rapl_pmu *pmu;
 
 	/* only look at RAPL events */
-	if (event->attr.type != rapl_pmu_class.type)
+	if (event->attr.type != rapl_pmus->pmu.type)
 		return -ENOENT;
 
 	/* check only supported bits are set */
 	if (event->attr.config & ~RAPL_EVENT_MASK)
 		return -EINVAL;
 
+	if (event->cpu < 0)
+		return -EINVAL;
+
 	/*
 	 * check event is known (determines counter)
 	 */
@@ -382,6 +378,9 @@ static int rapl_pmu_event_init(struct perf_event *event)
 		return -EINVAL;
 
 	/* must be done before validate_group */
+	pmu = cpu_to_rapl_pmu(event->cpu);
+	event->cpu = pmu->cpu;
+	event->pmu_private = pmu;
 	event->hw.event_base = msr;
 	event->hw.config = cfg;
 	event->hw.idx = bit;
@@ -411,19 +410,6 @@ static struct attribute_group rapl_pmu_attr_group = {
 	.attrs = rapl_pmu_attrs,
 };
 
-static ssize_t rapl_sysfs_show(struct device *dev,
-			       struct device_attribute *attr,
-			       char *page)
-{
-	struct perf_pmu_events_attr *pmu_attr = \
-		container_of(attr, struct perf_pmu_events_attr, attr);
-
-	if (pmu_attr->event_str)
-		return sprintf(page, "%s", pmu_attr->event_str);
-
-	return 0;
-}
-
 RAPL_EVENT_ATTR_STR(energy-cores, rapl_cores, "event=0x01");
 RAPL_EVENT_ATTR_STR(energy-pkg  ,   rapl_pkg, "event=0x02");
 RAPL_EVENT_ATTR_STR(energy-ram  ,   rapl_ram, "event=0x03");
@@ -525,139 +511,62 @@ const struct attribute_group *rapl_attr_groups[] = {
 	NULL,
 };
 
-static struct pmu rapl_pmu_class = {
-	.attr_groups	= rapl_attr_groups,
-	.task_ctx_nr	= perf_invalid_context, /* system-wide only */
-	.event_init	= rapl_pmu_event_init,
-	.add		= rapl_pmu_event_add, /* must have */
-	.del		= rapl_pmu_event_del, /* must have */
-	.start		= rapl_pmu_event_start,
-	.stop		= rapl_pmu_event_stop,
-	.read		= rapl_pmu_event_read,
-};
-
 static void rapl_cpu_exit(int cpu)
 {
-	struct rapl_pmu *pmu = per_cpu(rapl_pmu, cpu);
-	int i, phys_id = topology_physical_package_id(cpu);
-	int target = -1;
+	struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
+	int target;
 
-	/* find a new cpu on same package */
-	for_each_online_cpu(i) {
-		if (i == cpu)
-			continue;
-		if (phys_id == topology_physical_package_id(i)) {
-			target = i;
-			break;
-		}
-	}
-	/*
-	 * clear cpu from cpumask
-	 * if was set in cpumask and still some cpu on package,
-	 * then move to new cpu
-	 */
-	if (cpumask_test_and_clear_cpu(cpu, &rapl_cpu_mask) && target >= 0)
-		cpumask_set_cpu(target, &rapl_cpu_mask);
+	/* Check if exiting cpu is used for collecting rapl events */
+	if (!cpumask_test_and_clear_cpu(cpu, &rapl_cpu_mask))
+		return;
 
-	WARN_ON(cpumask_empty(&rapl_cpu_mask));
-	/*
-	 * migrate events and context to new cpu
-	 */
-	if (target >= 0)
-		perf_pmu_migrate_context(pmu->pmu, cpu, target);
+	pmu->cpu = -1;
+	/* Find a new cpu to collect rapl events */
+	target = cpumask_any_but(topology_core_cpumask(cpu), cpu);
 
-	/* cancel overflow polling timer for CPU */
-	rapl_stop_hrtimer(pmu);
+	/* Migrate rapl events to the new target */
+	if (target < nr_cpu_ids) {
+		cpumask_set_cpu(target, &rapl_cpu_mask);
+		pmu->cpu = target;
+		perf_pmu_migrate_context(pmu->pmu, cpu, target);
+	}
 }
 
 static void rapl_cpu_init(int cpu)
 {
-	int i, phys_id = topology_physical_package_id(cpu);
+	struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
+	int target;
 
-	/* check if phys_is is already covered */
-	for_each_cpu(i, &rapl_cpu_mask) {
-		if (phys_id == topology_physical_package_id(i))
-			return;
-	}
-	/* was not found, so add it */
-	cpumask_set_cpu(cpu, &rapl_cpu_mask);
-}
-
-static __init void rapl_hsw_server_quirk(void)
-{
 	/*
-	 * DRAM domain on HSW server has fixed energy unit which can be
-	 * different than the unit from power unit MSR.
-	 * "Intel Xeon Processor E5-1600 and E5-2600 v3 Product Families, V2
-	 * of 2. Datasheet, September 2014, Reference Number: 330784-001 "
+	 * Check if there is an online cpu in the package which collects rapl
+	 * events already.
 	 */
-	rapl_hw_unit[RAPL_IDX_RAM_NRG_STAT] = 16;
+	target = cpumask_any_and(&rapl_cpu_mask, topology_core_cpumask(cpu));
+	if (target < nr_cpu_ids)
+		return;
+
+	cpumask_set_cpu(cpu, &rapl_cpu_mask);
+	pmu->cpu = cpu;
 }
 
 static int rapl_cpu_prepare(int cpu)
 {
-	struct rapl_pmu *pmu = per_cpu(rapl_pmu, cpu);
-	int phys_id = topology_physical_package_id(cpu);
-	u64 ms;
+	struct rapl_pmu *pmu = cpu_to_rapl_pmu(cpu);
 
 	if (pmu)
 		return 0;
 
-	if (phys_id < 0)
-		return -1;
-
 	pmu = kzalloc_node(sizeof(*pmu), GFP_KERNEL, cpu_to_node(cpu));
 	if (!pmu)
-		return -1;
-	spin_lock_init(&pmu->lock);
+		return -ENOMEM;
 
+	raw_spin_lock_init(&pmu->lock);
 	INIT_LIST_HEAD(&pmu->active_list);
-
-	pmu->pmu = &rapl_pmu_class;
-
-	/*
-	 * use reference of 200W for scaling the timeout
-	 * to avoid missing counter overflows.
-	 * 200W = 200 Joules/sec
-	 * divide interval by 2 to avoid lockstep (2 * 100)
-	 * if hw unit is 32, then we use 2 ms 1/200/2
-	 */
-	if (rapl_hw_unit[0] < 32)
-		ms = (1000 / (2 * 100)) * (1ULL << (32 - rapl_hw_unit[0] - 1));
-	else
-		ms = 2;
-
-	pmu->timer_interval = ms_to_ktime(ms);
-
+	pmu->pmu = &rapl_pmus->pmu;
+	pmu->timer_interval = ms_to_ktime(rapl_timer_ms);
+	pmu->cpu = -1;
 	rapl_hrtimer_init(pmu);
-
-	/* set RAPL pmu for this cpu for now */
-	per_cpu(rapl_pmu, cpu) = pmu;
-	per_cpu(rapl_pmu_to_free, cpu) = NULL;
-
-	return 0;
-}
-
-static void rapl_cpu_kfree(int cpu)
-{
-	struct rapl_pmu *pmu = per_cpu(rapl_pmu_to_free, cpu);
-
-	kfree(pmu);
-
-	per_cpu(rapl_pmu_to_free, cpu) = NULL;
-}
-
-static int rapl_cpu_dying(int cpu)
-{
-	struct rapl_pmu *pmu = per_cpu(rapl_pmu, cpu);
-
-	if (!pmu)
-		return 0;
-
-	per_cpu(rapl_pmu, cpu) = NULL;
-
-	per_cpu(rapl_pmu_to_free, cpu) = pmu;
-
+	rapl_pmus->pmus[topology_logical_package_id(cpu)] = pmu;
 	return 0;
 }
 
@@ -670,28 +579,20 @@ static int rapl_cpu_notifier(struct notifier_block *self,
 	case CPU_UP_PREPARE:
 		rapl_cpu_prepare(cpu);
 		break;
-	case CPU_STARTING:
-		rapl_cpu_init(cpu);
-		break;
-	case CPU_UP_CANCELED:
-	case CPU_DYING:
-		rapl_cpu_dying(cpu);
-		break;
+
+	case CPU_DOWN_FAILED:
 	case CPU_ONLINE:
-	case CPU_DEAD:
-		rapl_cpu_kfree(cpu);
+		rapl_cpu_init(cpu);
 		break;
+
 	case CPU_DOWN_PREPARE:
 		rapl_cpu_exit(cpu);
 		break;
-	default:
-		break;
 	}
-
 	return NOTIFY_OK;
 }
 
-static int rapl_check_hw_unit(void)
+static int rapl_check_hw_unit(bool apply_quirk)
 {
 	u64 msr_rapl_power_unit_bits;
 	int i;
@@ -702,28 +603,107 @@ static int rapl_check_hw_unit(void)
 	for (i = 0; i < NR_RAPL_DOMAINS; i++)
 		rapl_hw_unit[i] = (msr_rapl_power_unit_bits >> 8) & 0x1FULL;
 
+	/*
+	 * DRAM domain on HSW server and KNL has fixed energy unit which can be
+	 * different than the unit from power unit MSR. See
+	 * "Intel Xeon Processor E5-1600 and E5-2600 v3 Product Families, V2
+	 * of 2. Datasheet, September 2014, Reference Number: 330784-001 "
+	 */
+	if (apply_quirk)
+		rapl_hw_unit[RAPL_IDX_RAM_NRG_STAT] = 16;
+
+	/*
+	 * Calculate the timer rate:
+	 * Use reference of 200W for scaling the timeout to avoid counter
+	 * overflows. 200W = 200 Joules/sec
+	 * Divide interval by 2 to avoid lockstep (2 * 100)
+	 * if hw unit is 32, then we use 2 ms 1/200/2
+	 */
+	rapl_timer_ms = 2;
+	if (rapl_hw_unit[0] < 32) {
+		rapl_timer_ms = (1000 / (2 * 100));
+		rapl_timer_ms *= (1ULL << (32 - rapl_hw_unit[0] - 1));
+	}
+	return 0;
+}
+
+static void __init rapl_advertise(void)
+{
+	int i;
+
+	pr_info("API unit is 2^-32 Joules, %d fixed counters, %llu ms ovfl timer\n",
+		hweight32(rapl_cntr_mask), rapl_timer_ms);
+
+	for (i = 0; i < NR_RAPL_DOMAINS; i++) {
+		if (rapl_cntr_mask & (1 << i)) {
+			pr_info("hw unit of domain %s 2^-%d Joules\n",
+				rapl_domain_names[i], rapl_hw_unit[i]);
+		}
+	}
+}
+
+static int __init rapl_prepare_cpus(void)
+{
+	unsigned int cpu, pkg;
+	int ret;
+
+	for_each_online_cpu(cpu) {
+		pkg = topology_logical_package_id(cpu);
+		if (rapl_pmus->pmus[pkg])
+			continue;
+
+		ret = rapl_cpu_prepare(cpu);
+		if (ret)
+			return ret;
+		rapl_cpu_init(cpu);
+	}
+	return 0;
+}
+
+static void __init cleanup_rapl_pmus(void)
+{
+	int i;
+
+	for (i = 0; i < rapl_pmus->maxpkg; i++)
+		kfree(rapl_pmus->pmus + i);
+	kfree(rapl_pmus);
+}
+
+static int __init init_rapl_pmus(void)
+{
+	int maxpkg = topology_max_packages();
+	size_t size;
+
+	size = sizeof(*rapl_pmus) + maxpkg * sizeof(struct rapl_pmu *);
+	rapl_pmus = kzalloc(size, GFP_KERNEL);
+	if (!rapl_pmus)
+		return -ENOMEM;
+
+	rapl_pmus->maxpkg		= maxpkg;
+	rapl_pmus->pmu.attr_groups	= rapl_attr_groups;
+	rapl_pmus->pmu.task_ctx_nr	= perf_invalid_context;
+	rapl_pmus->pmu.event_init	= rapl_pmu_event_init;
+	rapl_pmus->pmu.add		= rapl_pmu_event_add;
+	rapl_pmus->pmu.del		= rapl_pmu_event_del;
+	rapl_pmus->pmu.start		= rapl_pmu_event_start;
+	rapl_pmus->pmu.stop		= rapl_pmu_event_stop;
+	rapl_pmus->pmu.read		= rapl_pmu_event_read;
 	return 0;
 }
 
-static const struct x86_cpu_id rapl_cpu_match[] = {
+static const struct x86_cpu_id rapl_cpu_match[] __initconst = {
 	[0] = { .vendor = X86_VENDOR_INTEL, .family = 6 },
 	[1] = {},
 };
 
 static int __init rapl_pmu_init(void)
 {
-	struct rapl_pmu *pmu;
-	int cpu, ret;
-	struct x86_pmu_quirk *quirk;
-	int i;
+	bool apply_quirk = false;
+	int ret;
 
-	/*
-	 * check for Intel processor family 6
-	 */
 	if (!x86_match_cpu(rapl_cpu_match))
-		return 0;
+		return -ENODEV;
 
-	/* check supported CPU */
 	switch (boot_cpu_data.x86_model) {
 	case 42: /* Sandy Bridge */
 	case 58: /* Ivy Bridge */
@@ -731,13 +711,15 @@ static int __init rapl_pmu_init(void)
 		rapl_pmu_events_group.attrs = rapl_events_cln_attr;
 		break;
 	case 63: /* Haswell-Server */
-		rapl_add_quirk(rapl_hsw_server_quirk);
+	case 79: /* Broadwell-Server */
+		apply_quirk = true;
 		rapl_cntr_mask = RAPL_IDX_SRV;
 		rapl_pmu_events_group.attrs = rapl_events_srv_attr;
 		break;
 	case 60: /* Haswell */
 	case 69: /* Haswell-Celeron */
 	case 61: /* Broadwell */
+	case 71: /* Broadwell-H */
 		rapl_cntr_mask = RAPL_IDX_HSW;
 		rapl_pmu_events_group.attrs = rapl_events_hsw_attr;
 		break;
@@ -747,56 +729,41 @@ static int __init rapl_pmu_init(void)
 		rapl_pmu_events_group.attrs = rapl_events_srv_attr;
 		break;
 	case 87: /* Knights Landing */
-		rapl_add_quirk(rapl_hsw_server_quirk);
+		apply_quirk = true;
 		rapl_cntr_mask = RAPL_IDX_KNL;
 		rapl_pmu_events_group.attrs = rapl_events_knl_attr;
-
+		break;
 	default:
-		/* unsupported */
-		return 0;
+		return -ENODEV;
 	}
-	ret = rapl_check_hw_unit();
+
+	ret = rapl_check_hw_unit(apply_quirk);
 	if (ret)
 		return ret;
 
-	/* run cpu model quirks */
-	for (quirk = rapl_quirks; quirk; quirk = quirk->next)
-		quirk->func();
-	cpu_notifier_register_begin();
+	ret = init_rapl_pmus();
+	if (ret)
+		return ret;
 
-	for_each_online_cpu(cpu) {
-		ret = rapl_cpu_prepare(cpu);
-		if (ret)
-			goto out;
-		rapl_cpu_init(cpu);
-	}
+	cpu_notifier_register_begin();
 
-	__perf_cpu_notifier(rapl_cpu_notifier);
+	ret = rapl_prepare_cpus();
+	if (ret)
+		goto out;
 
-	ret = perf_pmu_register(&rapl_pmu_class, "power", -1);
-	if (WARN_ON(ret)) {
-		pr_info("RAPL PMU detected, registration failed (%d), RAPL PMU disabled\n", ret);
-		cpu_notifier_register_done();
-		return -1;
-	}
+	ret = perf_pmu_register(&rapl_pmus->pmu, "power", -1);
+	if (ret)
+		goto out;
 
-	pmu = __this_cpu_read(rapl_pmu);
+	__perf_cpu_notifier(rapl_cpu_notifier);
+	cpu_notifier_register_done();
+	rapl_advertise();
+	return 0;
 
-	pr_info("RAPL PMU detected,"
-		" API unit is 2^-32 Joules,"
-		" %d fixed counters"
-		" %llu ms ovfl timer\n",
-		hweight32(rapl_cntr_mask),
-		ktime_to_ms(pmu->timer_interval));
-	for (i = 0; i < NR_RAPL_DOMAINS; i++) {
-		if (rapl_cntr_mask & (1 << i)) {
-			pr_info("hw unit of domain %s 2^-%d Joules\n",
-				rapl_domain_names[i], rapl_hw_unit[i]);
-		}
-	}
 out:
+	pr_warn("Initialization failed (%d), disabled\n", ret);
+	cleanup_rapl_pmus();
 	cpu_notifier_register_done();
-
-	return 0;
+	return ret;
 }
 device_initcall(rapl_pmu_init);
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/events/intel/uncore.c
index 61215a69b03d..7012d18bb293 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -1,4 +1,4 @@
-#include "perf_event_intel_uncore.h"
+#include "uncore.h"
 
 static struct intel_uncore_type *empty_uncore[] = { NULL, };
 struct intel_uncore_type **uncore_msr_uncores = empty_uncore;
@@ -9,9 +9,9 @@ struct pci_driver *uncore_pci_driver;
 /* pci bus to socket mapping */
 DEFINE_RAW_SPINLOCK(pci2phy_map_lock);
 struct list_head pci2phy_map_head = LIST_HEAD_INIT(pci2phy_map_head);
-struct pci_dev *uncore_extra_pci_dev[UNCORE_SOCKET_MAX][UNCORE_EXTRA_PCI_DEV_MAX];
+struct pci_extra_dev *uncore_extra_pci_dev;
+static int max_packages;
 
-static DEFINE_RAW_SPINLOCK(uncore_box_lock);
 /* mask of cpus that collect uncore events */
 static cpumask_t uncore_cpu_mask;
 
@@ -21,7 +21,7 @@ static struct event_constraint uncore_constraint_fixed =
 struct event_constraint uncore_constraint_empty =
 	EVENT_CONSTRAINT(0, 0, 0);
 
-int uncore_pcibus_to_physid(struct pci_bus *bus)
+static int uncore_pcibus_to_physid(struct pci_bus *bus)
 {
 	struct pci2phy_map *map;
 	int phys_id = -1;
@@ -38,6 +38,16 @@ int uncore_pcibus_to_physid(struct pci_bus *bus)
 	return phys_id;
 }
 
+static void uncore_free_pcibus_map(void)
+{
+	struct pci2phy_map *map, *tmp;
+
+	list_for_each_entry_safe(map, tmp, &pci2phy_map_head, list) {
+		list_del(&map->list);
+		kfree(map);
+	}
+}
+
 struct pci2phy_map *__find_pci2phy_map(int segment)
 {
 	struct pci2phy_map *map, *alloc = NULL;
@@ -82,43 +92,9 @@ ssize_t uncore_event_show(struct kobject *kobj,
 	return sprintf(buf, "%s", event->config);
 }
 
-struct intel_uncore_pmu *uncore_event_to_pmu(struct perf_event *event)
-{
-	return container_of(event->pmu, struct intel_uncore_pmu, pmu);
-}
-
 struct intel_uncore_box *uncore_pmu_to_box(struct intel_uncore_pmu *pmu, int cpu)
 {
-	struct intel_uncore_box *box;
-
-	box = *per_cpu_ptr(pmu->box, cpu);
-	if (box)
-		return box;
-
-	raw_spin_lock(&uncore_box_lock);
-	/* Recheck in lock to handle races. */
-	if (*per_cpu_ptr(pmu->box, cpu))
-		goto out;
-	list_for_each_entry(box, &pmu->box_list, list) {
-		if (box->phys_id == topology_physical_package_id(cpu)) {
-			atomic_inc(&box->refcnt);
-			*per_cpu_ptr(pmu->box, cpu) = box;
-			break;
-		}
-	}
-out:
-	raw_spin_unlock(&uncore_box_lock);
-
-	return *per_cpu_ptr(pmu->box, cpu);
-}
-
-struct intel_uncore_box *uncore_event_to_box(struct perf_event *event)
-{
-	/*
-	 * perf core schedules event on the basis of cpu, uncore events are
-	 * collected by one of the cpus inside a physical package.
-	 */
-	return uncore_pmu_to_box(uncore_event_to_pmu(event), smp_processor_id());
+	return pmu->boxes[topology_logical_package_id(cpu)];
 }
 
 u64 uncore_msr_read_counter(struct intel_uncore_box *box, struct perf_event *event)
@@ -207,7 +183,8 @@ u64 uncore_shared_reg_config(struct intel_uncore_box *box, int idx)
 	return config;
 }
 
-static void uncore_assign_hw_event(struct intel_uncore_box *box, struct perf_event *event, int idx)
+static void uncore_assign_hw_event(struct intel_uncore_box *box,
+				   struct perf_event *event, int idx)
 {
 	struct hw_perf_event *hwc = &event->hw;
 
@@ -302,24 +279,25 @@ static void uncore_pmu_init_hrtimer(struct intel_uncore_box *box)
 	box->hrtimer.function = uncore_pmu_hrtimer;
 }
 
-static struct intel_uncore_box *uncore_alloc_box(struct intel_uncore_type *type, int node)
+static struct intel_uncore_box *uncore_alloc_box(struct intel_uncore_type *type,
+						 int node)
 {
+	int i, size, numshared = type->num_shared_regs ;
 	struct intel_uncore_box *box;
-	int i, size;
 
-	size = sizeof(*box) + type->num_shared_regs * sizeof(struct intel_uncore_extra_reg);
+	size = sizeof(*box) + numshared * sizeof(struct intel_uncore_extra_reg);
 
 	box = kzalloc_node(size, GFP_KERNEL, node);
 	if (!box)
 		return NULL;
 
-	for (i = 0; i < type->num_shared_regs; i++)
+	for (i = 0; i < numshared; i++)
 		raw_spin_lock_init(&box->shared_regs[i].lock);
 
 	uncore_pmu_init_hrtimer(box);
-	atomic_set(&box->refcnt, 1);
 	box->cpu = -1;
-	box->phys_id = -1;
+	box->pci_phys_id = -1;
+	box->pkgid = -1;
 
 	/* set default hrtimer timeout */
 	box->hrtimer_duration = UNCORE_PMU_HRTIMER_INTERVAL;
@@ -341,7 +319,8 @@ static bool is_uncore_event(struct perf_event *event)
 }
 
 static int
-uncore_collect_events(struct intel_uncore_box *box, struct perf_event *leader, bool dogrp)
+uncore_collect_events(struct intel_uncore_box *box, struct perf_event *leader,
+		      bool dogrp)
 {
 	struct perf_event *event;
 	int n, max_count;
@@ -402,7 +381,8 @@ uncore_get_event_constraint(struct intel_uncore_box *box, struct perf_event *eve
 	return &type->unconstrainted;
 }
 
-static void uncore_put_event_constraint(struct intel_uncore_box *box, struct perf_event *event)
+static void uncore_put_event_constraint(struct intel_uncore_box *box,
+					struct perf_event *event)
 {
 	if (box->pmu->type->ops->put_constraint)
 		box->pmu->type->ops->put_constraint(box, event);
@@ -582,7 +562,7 @@ static void uncore_pmu_event_del(struct perf_event *event, int flags)
 		if (event == box->event_list[i]) {
 			uncore_put_event_constraint(box, event);
 
-			while (++i < box->n_events)
+			for (++i; i < box->n_events; i++)
 				box->event_list[i - 1] = box->event_list[i];
 
 			--box->n_events;
@@ -676,6 +656,7 @@ static int uncore_pmu_event_init(struct perf_event *event)
 	if (!box || box->cpu < 0)
 		return -EINVAL;
 	event->cpu = box->cpu;
+	event->pmu_private = box;
 
 	event->hw.idx = -1;
 	event->hw.last_tag = ~0ULL;
@@ -760,64 +741,110 @@ static int uncore_pmu_register(struct intel_uncore_pmu *pmu)
 	}
 
 	ret = perf_pmu_register(&pmu->pmu, pmu->name, -1);
+	if (!ret)
+		pmu->registered = true;
 	return ret;
 }
 
+static void uncore_pmu_unregister(struct intel_uncore_pmu *pmu)
+{
+	if (!pmu->registered)
+		return;
+	perf_pmu_unregister(&pmu->pmu);
+	pmu->registered = false;
+}
+
+static void __init __uncore_exit_boxes(struct intel_uncore_type *type, int cpu)
+{
+	struct intel_uncore_pmu *pmu = type->pmus;
+	struct intel_uncore_box *box;
+	int i, pkg;
+
+	if (pmu) {
+		pkg = topology_physical_package_id(cpu);
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			box = pmu->boxes[pkg];
+			if (box)
+				uncore_box_exit(box);
+		}
+	}
+}
+
+static void __init uncore_exit_boxes(void *dummy)
+{
+	struct intel_uncore_type **types;
+
+	for (types = uncore_msr_uncores; *types; types++)
+		__uncore_exit_boxes(*types++, smp_processor_id());
+}
+
+static void uncore_free_boxes(struct intel_uncore_pmu *pmu)
+{
+	int pkg;
+
+	for (pkg = 0; pkg < max_packages; pkg++)
+		kfree(pmu->boxes[pkg]);
+	kfree(pmu->boxes);
+}
+
 static void __init uncore_type_exit(struct intel_uncore_type *type)
 {
+	struct intel_uncore_pmu *pmu = type->pmus;
 	int i;
 
-	for (i = 0; i < type->num_boxes; i++)
-		free_percpu(type->pmus[i].box);
-	kfree(type->pmus);
-	type->pmus = NULL;
+	if (pmu) {
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			uncore_pmu_unregister(pmu);
+			uncore_free_boxes(pmu);
+		}
+		kfree(type->pmus);
+		type->pmus = NULL;
+	}
 	kfree(type->events_group);
 	type->events_group = NULL;
 }
 
 static void __init uncore_types_exit(struct intel_uncore_type **types)
 {
-	int i;
-	for (i = 0; types[i]; i++)
-		uncore_type_exit(types[i]);
+	for (; *types; types++)
+		uncore_type_exit(*types);
 }
 
-static int __init uncore_type_init(struct intel_uncore_type *type)
+static int __init uncore_type_init(struct intel_uncore_type *type, bool setid)
 {
 	struct intel_uncore_pmu *pmus;
 	struct attribute_group *attr_group;
 	struct attribute **attrs;
+	size_t size;
 	int i, j;
 
 	pmus = kzalloc(sizeof(*pmus) * type->num_boxes, GFP_KERNEL);
 	if (!pmus)
 		return -ENOMEM;
 
-	type->pmus = pmus;
+	size = max_packages * sizeof(struct intel_uncore_box *);
 
+	for (i = 0; i < type->num_boxes; i++) {
+		pmus[i].func_id	= setid ? i : -1;
+		pmus[i].pmu_idx	= i;
+		pmus[i].type	= type;
+		pmus[i].boxes	= kzalloc(size, GFP_KERNEL);
+		if (!pmus[i].boxes)
+			return -ENOMEM;
+	}
+
+	type->pmus = pmus;
 	type->unconstrainted = (struct event_constraint)
 		__EVENT_CONSTRAINT(0, (1ULL << type->num_counters) - 1,
 				0, type->num_counters, 0, 0);
 
-	for (i = 0; i < type->num_boxes; i++) {
-		pmus[i].func_id = -1;
-		pmus[i].pmu_idx = i;
-		pmus[i].type = type;
-		INIT_LIST_HEAD(&pmus[i].box_list);
-		pmus[i].box = alloc_percpu(struct intel_uncore_box *);
-		if (!pmus[i].box)
-			goto fail;
-	}
-
 	if (type->event_descs) {
-		i = 0;
-		while (type->event_descs[i].attr.attr.name)
-			i++;
+		for (i = 0; type->event_descs[i].attr.attr.name; i++);
 
 		attr_group = kzalloc(sizeof(struct attribute *) * (i + 1) +
 					sizeof(*attr_group), GFP_KERNEL);
 		if (!attr_group)
-			goto fail;
+			return -ENOMEM;
 
 		attrs = (struct attribute **)(attr_group + 1);
 		attr_group->name = "events";
@@ -831,25 +858,19 @@ static int __init uncore_type_init(struct intel_uncore_type *type)
 
 	type->pmu_group = &uncore_pmu_attr_group;
 	return 0;
-fail:
-	uncore_type_exit(type);
-	return -ENOMEM;
 }
 
-static int __init uncore_types_init(struct intel_uncore_type **types)
+static int __init
+uncore_types_init(struct intel_uncore_type **types, bool setid)
 {
-	int i, ret;
+	int ret;
 
-	for (i = 0; types[i]; i++) {
-		ret = uncore_type_init(types[i]);
+	for (; *types; types++) {
+		ret = uncore_type_init(*types, setid);
 		if (ret)
-			goto fail;
+			return ret;
 	}
 	return 0;
-fail:
-	while (--i >= 0)
-		uncore_type_exit(types[i]);
-	return ret;
 }
 
 /*
@@ -857,68 +878,93 @@ fail:
  */
 static int uncore_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct intel_uncore_type *type;
 	struct intel_uncore_pmu *pmu;
 	struct intel_uncore_box *box;
-	struct intel_uncore_type *type;
-	int phys_id;
-	bool first_box = false;
+	int phys_id, pkg, ret;
 
 	phys_id = uncore_pcibus_to_physid(pdev->bus);
 	if (phys_id < 0)
 		return -ENODEV;
 
+	pkg = topology_phys_to_logical_pkg(phys_id);
+	if (WARN_ON_ONCE(pkg < 0))
+		return -EINVAL;
+
 	if (UNCORE_PCI_DEV_TYPE(id->driver_data) == UNCORE_EXTRA_PCI_DEV) {
 		int idx = UNCORE_PCI_DEV_IDX(id->driver_data);
-		uncore_extra_pci_dev[phys_id][idx] = pdev;
+
+		uncore_extra_pci_dev[pkg].dev[idx] = pdev;
 		pci_set_drvdata(pdev, NULL);
 		return 0;
 	}
 
 	type = uncore_pci_uncores[UNCORE_PCI_DEV_TYPE(id->driver_data)];
-	box = uncore_alloc_box(type, NUMA_NO_NODE);
-	if (!box)
-		return -ENOMEM;
-
 	/*
 	 * for performance monitoring unit with multiple boxes,
 	 * each box has a different function id.
 	 */
 	pmu = &type->pmus[UNCORE_PCI_DEV_IDX(id->driver_data)];
+	/* Knights Landing uses a common PCI device ID for multiple instances of
+	 * an uncore PMU device type. There is only one entry per device type in
+	 * the knl_uncore_pci_ids table inspite of multiple devices present for
+	 * some device types. Hence PCI device idx would be 0 for all devices.
+	 * So increment pmu pointer to point to an unused array element.
+	 */
+	if (boot_cpu_data.x86_model == 87) {
+		while (pmu->func_id >= 0)
+			pmu++;
+	}
+
+	if (WARN_ON_ONCE(pmu->boxes[pkg] != NULL))
+		return -EINVAL;
+
+	box = uncore_alloc_box(type, NUMA_NO_NODE);
+	if (!box)
+		return -ENOMEM;
+
 	if (pmu->func_id < 0)
 		pmu->func_id = pdev->devfn;
 	else
 		WARN_ON_ONCE(pmu->func_id != pdev->devfn);
 
-	box->phys_id = phys_id;
+	atomic_inc(&box->refcnt);
+	box->pci_phys_id = phys_id;
+	box->pkgid = pkg;
 	box->pci_dev = pdev;
 	box->pmu = pmu;
 	uncore_box_init(box);
 	pci_set_drvdata(pdev, box);
 
-	raw_spin_lock(&uncore_box_lock);
-	if (list_empty(&pmu->box_list))
-		first_box = true;
-	list_add_tail(&box->list, &pmu->box_list);
-	raw_spin_unlock(&uncore_box_lock);
+	pmu->boxes[pkg] = box;
+	if (atomic_inc_return(&pmu->activeboxes) > 1)
+		return 0;
 
-	if (first_box)
-		uncore_pmu_register(pmu);
-	return 0;
+	/* First active box registers the pmu */
+	ret = uncore_pmu_register(pmu);
+	if (ret) {
+		pci_set_drvdata(pdev, NULL);
+		pmu->boxes[pkg] = NULL;
+		uncore_box_exit(box);
+		kfree(box);
+	}
+	return ret;
 }
 
 static void uncore_pci_remove(struct pci_dev *pdev)
 {
 	struct intel_uncore_box *box = pci_get_drvdata(pdev);
 	struct intel_uncore_pmu *pmu;
-	int i, cpu, phys_id;
-	bool last_box = false;
+	int i, phys_id, pkg;
 
 	phys_id = uncore_pcibus_to_physid(pdev->bus);
+	pkg = topology_phys_to_logical_pkg(phys_id);
+
 	box = pci_get_drvdata(pdev);
 	if (!box) {
 		for (i = 0; i < UNCORE_EXTRA_PCI_DEV_MAX; i++) {
-			if (uncore_extra_pci_dev[phys_id][i] == pdev) {
-				uncore_extra_pci_dev[phys_id][i] = NULL;
+			if (uncore_extra_pci_dev[pkg].dev[i] == pdev) {
+				uncore_extra_pci_dev[pkg].dev[i] = NULL;
 				break;
 			}
 		}
@@ -927,33 +973,20 @@ static void uncore_pci_remove(struct pci_dev *pdev)
 	}
 
 	pmu = box->pmu;
-	if (WARN_ON_ONCE(phys_id != box->phys_id))
+	if (WARN_ON_ONCE(phys_id != box->pci_phys_id))
 		return;
 
 	pci_set_drvdata(pdev, NULL);
-
-	raw_spin_lock(&uncore_box_lock);
-	list_del(&box->list);
-	if (list_empty(&pmu->box_list))
-		last_box = true;
-	raw_spin_unlock(&uncore_box_lock);
-
-	for_each_possible_cpu(cpu) {
-		if (*per_cpu_ptr(pmu->box, cpu) == box) {
-			*per_cpu_ptr(pmu->box, cpu) = NULL;
-			atomic_dec(&box->refcnt);
-		}
-	}
-
-	WARN_ON_ONCE(atomic_read(&box->refcnt) != 1);
+	pmu->boxes[pkg] = NULL;
+	if (atomic_dec_return(&pmu->activeboxes) == 0)
+		uncore_pmu_unregister(pmu);
+	uncore_box_exit(box);
 	kfree(box);
-
-	if (last_box)
-		perf_pmu_unregister(&pmu->pmu);
 }
 
 static int __init uncore_pci_init(void)
 {
+	size_t size;
 	int ret;
 
 	switch (boot_cpu_data.x86_model) {
@@ -966,6 +999,7 @@ static int __init uncore_pci_init(void)
 	case 63: /* Haswell-EP */
 		ret = hswep_uncore_pci_init();
 		break;
+	case 79: /* BDX-EP */
 	case 86: /* BDX-DE */
 		ret = bdx_uncore_pci_init();
 		break;
@@ -982,26 +1016,47 @@ static int __init uncore_pci_init(void)
 	case 61: /* Broadwell */
 		ret = bdw_uncore_pci_init();
 		break;
+	case 87: /* Knights Landing */
+		ret = knl_uncore_pci_init();
+		break;
+	case 94: /* SkyLake */
+		ret = skl_uncore_pci_init();
+		break;
 	default:
-		return 0;
+		return -ENODEV;
 	}
 
 	if (ret)
 		return ret;
 
-	ret = uncore_types_init(uncore_pci_uncores);
+	size = max_packages * sizeof(struct pci_extra_dev);
+	uncore_extra_pci_dev = kzalloc(size, GFP_KERNEL);
+	if (!uncore_extra_pci_dev) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ret = uncore_types_init(uncore_pci_uncores, false);
 	if (ret)
-		return ret;
+		goto errtype;
 
 	uncore_pci_driver->probe = uncore_pci_probe;
 	uncore_pci_driver->remove = uncore_pci_remove;
 
 	ret = pci_register_driver(uncore_pci_driver);
-	if (ret == 0)
-		pcidrv_registered = true;
-	else
-		uncore_types_exit(uncore_pci_uncores);
+	if (ret)
+		goto errtype;
 
+	pcidrv_registered = true;
+	return 0;
+
+errtype:
+	uncore_types_exit(uncore_pci_uncores);
+	kfree(uncore_extra_pci_dev);
+	uncore_extra_pci_dev = NULL;
+	uncore_free_pcibus_map();
+err:
+	uncore_pci_uncores = empty_uncore;
 	return ret;
 }
 
@@ -1011,173 +1066,139 @@ static void __init uncore_pci_exit(void)
 		pcidrv_registered = false;
 		pci_unregister_driver(uncore_pci_driver);
 		uncore_types_exit(uncore_pci_uncores);
-	}
-}
-
-/* CPU hot plug/unplug are serialized by cpu_add_remove_lock mutex */
-static LIST_HEAD(boxes_to_free);
-
-static void uncore_kfree_boxes(void)
-{
-	struct intel_uncore_box *box;
-
-	while (!list_empty(&boxes_to_free)) {
-		box = list_entry(boxes_to_free.next,
-				 struct intel_uncore_box, list);
-		list_del(&box->list);
-		kfree(box);
+		kfree(uncore_extra_pci_dev);
+		uncore_free_pcibus_map();
 	}
 }
 
 static void uncore_cpu_dying(int cpu)
 {
-	struct intel_uncore_type *type;
+	struct intel_uncore_type *type, **types = uncore_msr_uncores;
 	struct intel_uncore_pmu *pmu;
 	struct intel_uncore_box *box;
-	int i, j;
-
-	for (i = 0; uncore_msr_uncores[i]; i++) {
-		type = uncore_msr_uncores[i];
-		for (j = 0; j < type->num_boxes; j++) {
-			pmu = &type->pmus[j];
-			box = *per_cpu_ptr(pmu->box, cpu);
-			*per_cpu_ptr(pmu->box, cpu) = NULL;
-			if (box && atomic_dec_and_test(&box->refcnt))
-				list_add(&box->list, &boxes_to_free);
+	int i, pkg;
+
+	pkg = topology_logical_package_id(cpu);
+	for (; *types; types++) {
+		type = *types;
+		pmu = type->pmus;
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			box = pmu->boxes[pkg];
+			if (box && atomic_dec_return(&box->refcnt) == 0)
+				uncore_box_exit(box);
 		}
 	}
 }
 
-static int uncore_cpu_starting(int cpu)
+static void uncore_cpu_starting(int cpu, bool init)
 {
-	struct intel_uncore_type *type;
+	struct intel_uncore_type *type, **types = uncore_msr_uncores;
 	struct intel_uncore_pmu *pmu;
-	struct intel_uncore_box *box, *exist;
-	int i, j, k, phys_id;
-
-	phys_id = topology_physical_package_id(cpu);
-
-	for (i = 0; uncore_msr_uncores[i]; i++) {
-		type = uncore_msr_uncores[i];
-		for (j = 0; j < type->num_boxes; j++) {
-			pmu = &type->pmus[j];
-			box = *per_cpu_ptr(pmu->box, cpu);
-			/* called by uncore_cpu_init? */
-			if (box && box->phys_id >= 0) {
-				uncore_box_init(box);
-				continue;
-			}
+	struct intel_uncore_box *box;
+	int i, pkg, ncpus = 1;
 
-			for_each_online_cpu(k) {
-				exist = *per_cpu_ptr(pmu->box, k);
-				if (exist && exist->phys_id == phys_id) {
-					atomic_inc(&exist->refcnt);
-					*per_cpu_ptr(pmu->box, cpu) = exist;
-					if (box) {
-						list_add(&box->list,
-							 &boxes_to_free);
-						box = NULL;
-					}
-					break;
-				}
-			}
+	if (init) {
+		/*
+		 * On init we get the number of online cpus in the package
+		 * and set refcount for all of them.
+		 */
+		ncpus = cpumask_weight(topology_core_cpumask(cpu));
+	}
 
-			if (box) {
-				box->phys_id = phys_id;
+	pkg = topology_logical_package_id(cpu);
+	for (; *types; types++) {
+		type = *types;
+		pmu = type->pmus;
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			box = pmu->boxes[pkg];
+			if (!box)
+				continue;
+			/* The first cpu on a package activates the box */
+			if (atomic_add_return(ncpus, &box->refcnt) == ncpus)
 				uncore_box_init(box);
-			}
 		}
 	}
-	return 0;
 }
 
-static int uncore_cpu_prepare(int cpu, int phys_id)
+static int uncore_cpu_prepare(int cpu)
 {
-	struct intel_uncore_type *type;
+	struct intel_uncore_type *type, **types = uncore_msr_uncores;
 	struct intel_uncore_pmu *pmu;
 	struct intel_uncore_box *box;
-	int i, j;
-
-	for (i = 0; uncore_msr_uncores[i]; i++) {
-		type = uncore_msr_uncores[i];
-		for (j = 0; j < type->num_boxes; j++) {
-			pmu = &type->pmus[j];
-			if (pmu->func_id < 0)
-				pmu->func_id = j;
-
+	int i, pkg;
+
+	pkg = topology_logical_package_id(cpu);
+	for (; *types; types++) {
+		type = *types;
+		pmu = type->pmus;
+		for (i = 0; i < type->num_boxes; i++, pmu++) {
+			if (pmu->boxes[pkg])
+				continue;
+			/* First cpu of a package allocates the box */
 			box = uncore_alloc_box(type, cpu_to_node(cpu));
 			if (!box)
 				return -ENOMEM;
-
 			box->pmu = pmu;
-			box->phys_id = phys_id;
-			*per_cpu_ptr(pmu->box, cpu) = box;
+			box->pkgid = pkg;
+			pmu->boxes[pkg] = box;
 		}
 	}
 	return 0;
 }
 
-static void
-uncore_change_context(struct intel_uncore_type **uncores, int old_cpu, int new_cpu)
+static void uncore_change_type_ctx(struct intel_uncore_type *type, int old_cpu,
+				   int new_cpu)
 {
-	struct intel_uncore_type *type;
-	struct intel_uncore_pmu *pmu;
+	struct intel_uncore_pmu *pmu = type->pmus;
 	struct intel_uncore_box *box;
-	int i, j;
-
-	for (i = 0; uncores[i]; i++) {
-		type = uncores[i];
-		for (j = 0; j < type->num_boxes; j++) {
-			pmu = &type->pmus[j];
-			if (old_cpu < 0)
-				box = uncore_pmu_to_box(pmu, new_cpu);
-			else
-				box = uncore_pmu_to_box(pmu, old_cpu);
-			if (!box)
-				continue;
+	int i, pkg;
 
-			if (old_cpu < 0) {
-				WARN_ON_ONCE(box->cpu != -1);
-				box->cpu = new_cpu;
-				continue;
-			}
+	pkg = topology_logical_package_id(old_cpu < 0 ? new_cpu : old_cpu);
+	for (i = 0; i < type->num_boxes; i++, pmu++) {
+		box = pmu->boxes[pkg];
+		if (!box)
+			continue;
 
-			WARN_ON_ONCE(box->cpu != old_cpu);
-			if (new_cpu >= 0) {
-				uncore_pmu_cancel_hrtimer(box);
-				perf_pmu_migrate_context(&pmu->pmu,
-						old_cpu, new_cpu);
-				box->cpu = new_cpu;
-			} else {
-				box->cpu = -1;
-			}
+		if (old_cpu < 0) {
+			WARN_ON_ONCE(box->cpu != -1);
+			box->cpu = new_cpu;
+			continue;
 		}
+
+		WARN_ON_ONCE(box->cpu != old_cpu);
+		box->cpu = -1;
+		if (new_cpu < 0)
+			continue;
+
+		uncore_pmu_cancel_hrtimer(box);
+		perf_pmu_migrate_context(&pmu->pmu, old_cpu, new_cpu);
+		box->cpu = new_cpu;
 	}
 }
 
+static void uncore_change_context(struct intel_uncore_type **uncores,
+				  int old_cpu, int new_cpu)
+{
+	for (; *uncores; uncores++)
+		uncore_change_type_ctx(*uncores, old_cpu, new_cpu);
+}
+
 static void uncore_event_exit_cpu(int cpu)
 {
-	int i, phys_id, target;
+	int target;
 
-	/* if exiting cpu is used for collecting uncore events */
+	/* Check if exiting cpu is used for collecting uncore events */
 	if (!cpumask_test_and_clear_cpu(cpu, &uncore_cpu_mask))
 		return;
 
-	/* find a new cpu to collect uncore events */
-	phys_id = topology_physical_package_id(cpu);
-	target = -1;
-	for_each_online_cpu(i) {
-		if (i == cpu)
-			continue;
-		if (phys_id == topology_physical_package_id(i)) {
-			target = i;
-			break;
-		}
-	}
+	/* Find a new cpu to collect uncore events */
+	target = cpumask_any_but(topology_core_cpumask(cpu), cpu);
 
-	/* migrate uncore events to the new cpu */
-	if (target >= 0)
+	/* Migrate uncore events to the new target */
+	if (target < nr_cpu_ids)
 		cpumask_set_cpu(target, &uncore_cpu_mask);
+	else
+		target = -1;
 
 	uncore_change_context(uncore_msr_uncores, cpu, target);
 	uncore_change_context(uncore_pci_uncores, cpu, target);
@@ -1185,13 +1206,15 @@ static void uncore_event_exit_cpu(int cpu)
 
 static void uncore_event_init_cpu(int cpu)
 {
-	int i, phys_id;
+	int target;
 
-	phys_id = topology_physical_package_id(cpu);
-	for_each_cpu(i, &uncore_cpu_mask) {
-		if (phys_id == topology_physical_package_id(i))
-			return;
-	}
+	/*
+	 * Check if there is an online cpu in the package
+	 * which collects uncore events already.
+	 */
+	target = cpumask_any_and(&uncore_cpu_mask, topology_core_cpumask(cpu));
+	if (target < nr_cpu_ids)
+		return;
 
 	cpumask_set_cpu(cpu, &uncore_cpu_mask);
 
@@ -1204,39 +1227,25 @@ static int uncore_cpu_notifier(struct notifier_block *self,
 {
 	unsigned int cpu = (long)hcpu;
 
-	/* allocate/free data structure for uncore box */
 	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_UP_PREPARE:
-		uncore_cpu_prepare(cpu, -1);
-		break;
+		return notifier_from_errno(uncore_cpu_prepare(cpu));
+
 	case CPU_STARTING:
-		uncore_cpu_starting(cpu);
+		uncore_cpu_starting(cpu, false);
+	case CPU_DOWN_FAILED:
+		uncore_event_init_cpu(cpu);
 		break;
+
 	case CPU_UP_CANCELED:
 	case CPU_DYING:
 		uncore_cpu_dying(cpu);
 		break;
-	case CPU_ONLINE:
-	case CPU_DEAD:
-		uncore_kfree_boxes();
-		break;
-	default:
-		break;
-	}
 
-	/* select the cpu that collects uncore events */
-	switch (action & ~CPU_TASKS_FROZEN) {
-	case CPU_DOWN_FAILED:
-	case CPU_STARTING:
-		uncore_event_init_cpu(cpu);
-		break;
 	case CPU_DOWN_PREPARE:
 		uncore_event_exit_cpu(cpu);
 		break;
-	default:
-		break;
 	}
-
 	return NOTIFY_OK;
 }
 
@@ -1249,9 +1258,29 @@ static struct notifier_block uncore_cpu_nb = {
 	.priority	= CPU_PRI_PERF + 1,
 };
 
-static void __init uncore_cpu_setup(void *dummy)
+static int __init type_pmu_register(struct intel_uncore_type *type)
 {
-	uncore_cpu_starting(smp_processor_id());
+	int i, ret;
+
+	for (i = 0; i < type->num_boxes; i++) {
+		ret = uncore_pmu_register(&type->pmus[i]);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static int __init uncore_msr_pmus_register(void)
+{
+	struct intel_uncore_type **types = uncore_msr_uncores;
+	int ret;
+
+	for (; *types; types++) {
+		ret = type_pmu_register(*types);
+		if (ret)
+			return ret;
+	}
+	return 0;
 }
 
 static int __init uncore_cpu_init(void)
@@ -1287,75 +1316,69 @@ static int __init uncore_cpu_init(void)
 	case 63: /* Haswell-EP */
 		hswep_uncore_cpu_init();
 		break;
+	case 79: /* BDX-EP */
 	case 86: /* BDX-DE */
 		bdx_uncore_cpu_init();
 		break;
+	case 87: /* Knights Landing */
+		knl_uncore_cpu_init();
+		break;
 	default:
-		return 0;
+		return -ENODEV;
 	}
 
-	ret = uncore_types_init(uncore_msr_uncores);
+	ret = uncore_types_init(uncore_msr_uncores, true);
 	if (ret)
-		return ret;
+		goto err;
 
+	ret = uncore_msr_pmus_register();
+	if (ret)
+		goto err;
 	return 0;
+err:
+	uncore_types_exit(uncore_msr_uncores);
+	uncore_msr_uncores = empty_uncore;
+	return ret;
 }
 
-static int __init uncore_pmus_register(void)
+static void __init uncore_cpu_setup(void *dummy)
 {
-	struct intel_uncore_pmu *pmu;
-	struct intel_uncore_type *type;
-	int i, j;
-
-	for (i = 0; uncore_msr_uncores[i]; i++) {
-		type = uncore_msr_uncores[i];
-		for (j = 0; j < type->num_boxes; j++) {
-			pmu = &type->pmus[j];
-			uncore_pmu_register(pmu);
-		}
-	}
-
-	return 0;
+	uncore_cpu_starting(smp_processor_id(), true);
 }
 
-static void __init uncore_cpumask_init(void)
-{
-	int cpu;
-
-	/*
-	 * ony invoke once from msr or pci init code
-	 */
-	if (!cpumask_empty(&uncore_cpu_mask))
-		return;
+/* Lazy to avoid allocation of a few bytes for the normal case */
+static __initdata DECLARE_BITMAP(packages, MAX_LOCAL_APIC);
 
-	cpu_notifier_register_begin();
+static int __init uncore_cpumask_init(bool msr)
+{
+	unsigned int cpu;
 
 	for_each_online_cpu(cpu) {
-		int i, phys_id = topology_physical_package_id(cpu);
+		unsigned int pkg = topology_logical_package_id(cpu);
+		int ret;
 
-		for_each_cpu(i, &uncore_cpu_mask) {
-			if (phys_id == topology_physical_package_id(i)) {
-				phys_id = -1;
-				break;
-			}
-		}
-		if (phys_id < 0)
+		if (test_and_set_bit(pkg, packages))
 			continue;
-
-		uncore_cpu_prepare(cpu, phys_id);
+		/*
+		 * The first online cpu of each package allocates and takes
+		 * the refcounts for all other online cpus in that package.
+		 * If msrs are not enabled no allocation is required.
+		 */
+		if (msr) {
+			ret = uncore_cpu_prepare(cpu);
+			if (ret)
+				return ret;
+		}
 		uncore_event_init_cpu(cpu);
+		smp_call_function_single(cpu, uncore_cpu_setup, NULL, 1);
 	}
-	on_each_cpu(uncore_cpu_setup, NULL, 1);
-
 	__register_cpu_notifier(&uncore_cpu_nb);
-
-	cpu_notifier_register_done();
+	return 0;
 }
 
-
 static int __init intel_uncore_init(void)
 {
-	int ret;
+	int pret, cret, ret;
 
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
 		return -ENODEV;
@@ -1363,19 +1386,27 @@ static int __init intel_uncore_init(void)
 	if (cpu_has_hypervisor)
 		return -ENODEV;
 
-	ret = uncore_pci_init();
-	if (ret)
-		goto fail;
-	ret = uncore_cpu_init();
-	if (ret) {
-		uncore_pci_exit();
-		goto fail;
-	}
-	uncore_cpumask_init();
+	max_packages = topology_max_packages();
+
+	pret = uncore_pci_init();
+	cret = uncore_cpu_init();
 
-	uncore_pmus_register();
+	if (cret && pret)
+		return -ENODEV;
+
+	cpu_notifier_register_begin();
+	ret = uncore_cpumask_init(!cret);
+	if (ret)
+		goto err;
+	cpu_notifier_register_done();
 	return 0;
-fail:
+
+err:
+	/* Undo box->init_box() */
+	on_each_cpu_mask(&uncore_cpu_mask, uncore_exit_boxes, NULL, 1);
+	uncore_types_exit(uncore_msr_uncores);
+	uncore_pci_exit();
+	cpu_notifier_register_done();
 	return ret;
 }
 device_initcall(intel_uncore_init);
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.h b/arch/x86/events/intel/uncore.h
index 2f0a4a98e16b..79766b9a3580 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -1,8 +1,10 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <asm/apicdef.h>
+
 #include <linux/perf_event.h>
-#include "perf_event.h"
+#include "../perf_event.h"
 
 #define UNCORE_PMU_NAME_LEN		32
 #define UNCORE_PMU_HRTIMER_INTERVAL	(60LL * NSEC_PER_SEC)
@@ -19,11 +21,12 @@
 #define UNCORE_EXTRA_PCI_DEV		0xff
 #define UNCORE_EXTRA_PCI_DEV_MAX	3
 
-/* support up to 8 sockets */
-#define UNCORE_SOCKET_MAX		8
-
 #define UNCORE_EVENT_CONSTRAINT(c, n) EVENT_CONSTRAINT(c, n, 0xff)
 
+struct pci_extra_dev {
+	struct pci_dev *dev[UNCORE_EXTRA_PCI_DEV_MAX];
+};
+
 struct intel_uncore_ops;
 struct intel_uncore_pmu;
 struct intel_uncore_box;
@@ -61,6 +64,7 @@ struct intel_uncore_type {
 
 struct intel_uncore_ops {
 	void (*init_box)(struct intel_uncore_box *);
+	void (*exit_box)(struct intel_uncore_box *);
 	void (*disable_box)(struct intel_uncore_box *);
 	void (*enable_box)(struct intel_uncore_box *);
 	void (*disable_event)(struct intel_uncore_box *, struct perf_event *);
@@ -73,13 +77,14 @@ struct intel_uncore_ops {
 };
 
 struct intel_uncore_pmu {
-	struct pmu pmu;
-	char name[UNCORE_PMU_NAME_LEN];
-	int pmu_idx;
-	int func_id;
-	struct intel_uncore_type *type;
-	struct intel_uncore_box ** __percpu box;
-	struct list_head box_list;
+	struct pmu			pmu;
+	char				name[UNCORE_PMU_NAME_LEN];
+	int				pmu_idx;
+	int				func_id;
+	bool				registered;
+	atomic_t			activeboxes;
+	struct intel_uncore_type	*type;
+	struct intel_uncore_box		**boxes;
 };
 
 struct intel_uncore_extra_reg {
@@ -89,7 +94,8 @@ struct intel_uncore_extra_reg {
 };
 
 struct intel_uncore_box {
-	int phys_id;
+	int pci_phys_id;
+	int pkgid;
 	int n_active;	/* number of active events */
 	int n_events;
 	int cpu;	/* cpu to collect events */
@@ -123,7 +129,6 @@ struct pci2phy_map {
 	int pbus_to_physid[256];
 };
 
-int uncore_pcibus_to_physid(struct pci_bus *bus);
 struct pci2phy_map *__find_pci2phy_map(int segment);
 
 ssize_t uncore_event_show(struct kobject *kobj,
@@ -305,14 +310,30 @@ static inline void uncore_box_init(struct intel_uncore_box *box)
 	}
 }
 
+static inline void uncore_box_exit(struct intel_uncore_box *box)
+{
+	if (test_and_clear_bit(UNCORE_BOX_FLAG_INITIATED, &box->flags)) {
+		if (box->pmu->type->ops->exit_box)
+			box->pmu->type->ops->exit_box(box);
+	}
+}
+
 static inline bool uncore_box_is_fake(struct intel_uncore_box *box)
 {
-	return (box->phys_id < 0);
+	return (box->pkgid < 0);
+}
+
+static inline struct intel_uncore_pmu *uncore_event_to_pmu(struct perf_event *event)
+{
+	return container_of(event->pmu, struct intel_uncore_pmu, pmu);
+}
+
+static inline struct intel_uncore_box *uncore_event_to_box(struct perf_event *event)
+{
+	return event->pmu_private;
 }
 
-struct intel_uncore_pmu *uncore_event_to_pmu(struct perf_event *event);
 struct intel_uncore_box *uncore_pmu_to_box(struct intel_uncore_pmu *pmu, int cpu);
-struct intel_uncore_box *uncore_event_to_box(struct perf_event *event);
 u64 uncore_msr_read_counter(struct intel_uncore_box *box, struct perf_event *event);
 void uncore_pmu_start_hrtimer(struct intel_uncore_box *box);
 void uncore_pmu_cancel_hrtimer(struct intel_uncore_box *box);
@@ -328,7 +349,7 @@ extern struct intel_uncore_type **uncore_pci_uncores;
 extern struct pci_driver *uncore_pci_driver;
 extern raw_spinlock_t pci2phy_map_lock;
 extern struct list_head pci2phy_map_head;
-extern struct pci_dev *uncore_extra_pci_dev[UNCORE_SOCKET_MAX][UNCORE_EXTRA_PCI_DEV_MAX];
+extern struct pci_extra_dev *uncore_extra_pci_dev;
 extern struct event_constraint uncore_constraint_empty;
 
 /* perf_event_intel_uncore_snb.c */
@@ -336,8 +357,10 @@ int snb_uncore_pci_init(void);
 int ivb_uncore_pci_init(void);
 int hsw_uncore_pci_init(void);
 int bdw_uncore_pci_init(void);
+int skl_uncore_pci_init(void);
 void snb_uncore_cpu_init(void);
 void nhm_uncore_cpu_init(void);
+int snb_pci2phy_map_init(int devid);
 
 /* perf_event_intel_uncore_snbep.c */
 int snbep_uncore_pci_init(void);
@@ -348,6 +371,8 @@ int hswep_uncore_pci_init(void);
 void hswep_uncore_cpu_init(void);
 int bdx_uncore_pci_init(void);
 void bdx_uncore_cpu_init(void);
+int knl_uncore_pci_init(void);
+void knl_uncore_cpu_init(void);
 
 /* perf_event_intel_uncore_nhmex.c */
 void nhmex_uncore_cpu_init(void);
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c b/arch/x86/events/intel/uncore_nhmex.c
index 2749965afed0..cda569332005 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c
+++ b/arch/x86/events/intel/uncore_nhmex.c
@@ -1,5 +1,5 @@
 /* Nehalem-EX/Westmere-EX uncore support */
-#include "perf_event_intel_uncore.h"
+#include "uncore.h"
 
 /* NHM-EX event control */
 #define NHMEX_PMON_CTL_EV_SEL_MASK	0x000000ff
@@ -201,6 +201,11 @@ static void nhmex_uncore_msr_init_box(struct intel_uncore_box *box)
 	wrmsrl(NHMEX_U_MSR_PMON_GLOBAL_CTL, NHMEX_U_PMON_GLOBAL_EN_ALL);
 }
 
+static void nhmex_uncore_msr_exit_box(struct intel_uncore_box *box)
+{
+	wrmsrl(NHMEX_U_MSR_PMON_GLOBAL_CTL, 0);
+}
+
 static void nhmex_uncore_msr_disable_box(struct intel_uncore_box *box)
 {
 	unsigned msr = uncore_msr_box_ctl(box);
@@ -250,6 +255,7 @@ static void nhmex_uncore_msr_enable_event(struct intel_uncore_box *box, struct p
 
 #define NHMEX_UNCORE_OPS_COMMON_INIT()				\
 	.init_box	= nhmex_uncore_msr_init_box,		\
+	.exit_box	= nhmex_uncore_msr_exit_box,		\
 	.disable_box	= nhmex_uncore_msr_disable_box,		\
 	.enable_box	= nhmex_uncore_msr_enable_box,		\
 	.disable_event	= nhmex_uncore_msr_disable_event,	\
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 845256158a10..96531d2b843f 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -1,5 +1,5 @@
 /* Nehalem/SandBridge/Haswell uncore support */
-#include "perf_event_intel_uncore.h"
+#include "uncore.h"
 
 /* Uncore IMC PCI IDs */
 #define PCI_DEVICE_ID_INTEL_SNB_IMC	0x0100
@@ -8,6 +8,7 @@
 #define PCI_DEVICE_ID_INTEL_HSW_IMC	0x0c00
 #define PCI_DEVICE_ID_INTEL_HSW_U_IMC	0x0a04
 #define PCI_DEVICE_ID_INTEL_BDW_IMC	0x1604
+#define PCI_DEVICE_ID_INTEL_SKL_IMC	0x191f
 
 /* SNB event control */
 #define SNB_UNC_CTL_EV_SEL_MASK			0x000000ff
@@ -94,6 +95,12 @@ static void snb_uncore_msr_init_box(struct intel_uncore_box *box)
 	}
 }
 
+static void snb_uncore_msr_exit_box(struct intel_uncore_box *box)
+{
+	if (box->pmu->pmu_idx == 0)
+		wrmsrl(SNB_UNC_PERF_GLOBAL_CTL, 0);
+}
+
 static struct uncore_event_desc snb_uncore_events[] = {
 	INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"),
 	{ /* end: all zeroes */ },
@@ -115,6 +122,7 @@ static struct attribute_group snb_uncore_format_group = {
 
 static struct intel_uncore_ops snb_uncore_msr_ops = {
 	.init_box	= snb_uncore_msr_init_box,
+	.exit_box	= snb_uncore_msr_exit_box,
 	.disable_event	= snb_uncore_msr_disable_event,
 	.enable_event	= snb_uncore_msr_enable_event,
 	.read_counter	= uncore_msr_read_counter,
@@ -230,6 +238,11 @@ static void snb_uncore_imc_init_box(struct intel_uncore_box *box)
 	box->hrtimer_duration = UNCORE_SNB_IMC_HRTIMER_INTERVAL;
 }
 
+static void snb_uncore_imc_exit_box(struct intel_uncore_box *box)
+{
+	iounmap(box->io_addr);
+}
+
 static void snb_uncore_imc_enable_box(struct intel_uncore_box *box)
 {}
 
@@ -300,6 +313,7 @@ static int snb_uncore_imc_event_init(struct perf_event *event)
 		return -EINVAL;
 
 	event->cpu = box->cpu;
+	event->pmu_private = box;
 
 	event->hw.idx = -1;
 	event->hw.last_tag = ~0ULL;
@@ -417,7 +431,7 @@ static void snb_uncore_imc_event_del(struct perf_event *event, int flags)
 	}
 }
 
-static int snb_pci2phy_map_init(int devid)
+int snb_pci2phy_map_init(int devid)
 {
 	struct pci_dev *dev = NULL;
 	struct pci2phy_map *map;
@@ -457,6 +471,7 @@ static struct pmu snb_uncore_imc_pmu = {
 
 static struct intel_uncore_ops snb_uncore_imc_ops = {
 	.init_box	= snb_uncore_imc_init_box,
+	.exit_box	= snb_uncore_imc_exit_box,
 	.enable_box	= snb_uncore_imc_enable_box,
 	.disable_box	= snb_uncore_imc_disable_box,
 	.disable_event	= snb_uncore_imc_disable_event,
@@ -524,6 +539,14 @@ static const struct pci_device_id bdw_uncore_pci_ids[] = {
 	{ /* end: all zeroes */ },
 };
 
+static const struct pci_device_id skl_uncore_pci_ids[] = {
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* end: all zeroes */ },
+};
+
 static struct pci_driver snb_uncore_pci_driver = {
 	.name		= "snb_uncore",
 	.id_table	= snb_uncore_pci_ids,
@@ -544,6 +567,11 @@ static struct pci_driver bdw_uncore_pci_driver = {
 	.id_table	= bdw_uncore_pci_ids,
 };
 
+static struct pci_driver skl_uncore_pci_driver = {
+	.name		= "skl_uncore",
+	.id_table	= skl_uncore_pci_ids,
+};
+
 struct imc_uncore_pci_dev {
 	__u32 pci_id;
 	struct pci_driver *driver;
@@ -558,6 +586,7 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = {
 	IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver),    /* 4th Gen Core Processor */
 	IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver),  /* 4th Gen Core ULT Mobile Processor */
 	IMC_DEV(BDW_IMC, &bdw_uncore_pci_driver),    /* 5th Gen Core U */
+	IMC_DEV(SKL_IMC, &skl_uncore_pci_driver),    /* 6th Gen Core */
 	{  /* end marker */ }
 };
 
@@ -610,6 +639,11 @@ int bdw_uncore_pci_init(void)
 	return imc_uncore_pci_init();
 }
 
+int skl_uncore_pci_init(void)
+{
+	return imc_uncore_pci_init();
+}
+
 /* end of Sandy Bridge uncore support */
 
 /* Nehalem uncore support */
diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index f0f4fcba252e..ab2bcaaebe38 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -1,6 +1,5 @@
 /* SandyBridge-EP/IvyTown uncore support */
-#include "perf_event_intel_uncore.h"
-
+#include "uncore.h"
 
 /* SNB-EP Box level control */
 #define SNBEP_PMON_BOX_CTL_RST_CTRL	(1 << 0)
@@ -47,7 +46,6 @@
 				(SNBEP_PMON_CTL_EV_SEL_MASK | \
 				 SNBEP_PCU_MSR_PMON_CTL_OCC_SEL_MASK | \
 				 SNBEP_PMON_CTL_EDGE_DET | \
-				 SNBEP_PMON_CTL_EV_SEL_EXT | \
 				 SNBEP_PMON_CTL_INVERT | \
 				 SNBEP_PCU_MSR_PMON_CTL_TRESH_MASK | \
 				 SNBEP_PCU_MSR_PMON_CTL_OCC_INVERT | \
@@ -149,7 +147,6 @@
 /* IVBEP PCU */
 #define IVBEP_PCU_MSR_PMON_RAW_EVENT_MASK	\
 				(SNBEP_PMON_CTL_EV_SEL_MASK | \
-				 SNBEP_PMON_CTL_EV_SEL_EXT | \
 				 SNBEP_PCU_MSR_PMON_CTL_OCC_SEL_MASK | \
 				 SNBEP_PMON_CTL_EDGE_DET | \
 				 SNBEP_PCU_MSR_PMON_CTL_TRESH_MASK | \
@@ -209,31 +206,97 @@
 #define HSWEP_PCU_MSR_PMON_BOX_CTL		0x710
 #define HSWEP_PCU_MSR_PMON_BOX_FILTER		0x715
 
+/* KNL Ubox */
+#define KNL_U_MSR_PMON_RAW_EVENT_MASK \
+					(SNBEP_U_MSR_PMON_RAW_EVENT_MASK | \
+						SNBEP_CBO_PMON_CTL_TID_EN)
+/* KNL CHA */
+#define KNL_CHA_MSR_OFFSET			0xc
+#define KNL_CHA_MSR_PMON_CTL_QOR		(1 << 16)
+#define KNL_CHA_MSR_PMON_RAW_EVENT_MASK \
+					(SNBEP_CBO_MSR_PMON_RAW_EVENT_MASK | \
+					 KNL_CHA_MSR_PMON_CTL_QOR)
+#define KNL_CHA_MSR_PMON_BOX_FILTER_TID		0x1ff
+#define KNL_CHA_MSR_PMON_BOX_FILTER_STATE	(7 << 18)
+#define KNL_CHA_MSR_PMON_BOX_FILTER_OP		(0xfffffe2aULL << 32)
+
+/* KNL EDC/MC UCLK */
+#define KNL_UCLK_MSR_PMON_CTR0_LOW		0x400
+#define KNL_UCLK_MSR_PMON_CTL0			0x420
+#define KNL_UCLK_MSR_PMON_BOX_CTL		0x430
+#define KNL_UCLK_MSR_PMON_UCLK_FIXED_LOW	0x44c
+#define KNL_UCLK_MSR_PMON_UCLK_FIXED_CTL	0x454
+#define KNL_PMON_FIXED_CTL_EN			0x1
+
+/* KNL EDC */
+#define KNL_EDC0_ECLK_MSR_PMON_CTR0_LOW		0xa00
+#define KNL_EDC0_ECLK_MSR_PMON_CTL0		0xa20
+#define KNL_EDC0_ECLK_MSR_PMON_BOX_CTL		0xa30
+#define KNL_EDC0_ECLK_MSR_PMON_ECLK_FIXED_LOW	0xa3c
+#define KNL_EDC0_ECLK_MSR_PMON_ECLK_FIXED_CTL	0xa44
+
+/* KNL MC */
+#define KNL_MC0_CH0_MSR_PMON_CTR0_LOW		0xb00
+#define KNL_MC0_CH0_MSR_PMON_CTL0		0xb20
+#define KNL_MC0_CH0_MSR_PMON_BOX_CTL		0xb30
+#define KNL_MC0_CH0_MSR_PMON_FIXED_LOW		0xb3c
+#define KNL_MC0_CH0_MSR_PMON_FIXED_CTL		0xb44
+
+/* KNL IRP */
+#define KNL_IRP_PCI_PMON_BOX_CTL		0xf0
+#define KNL_IRP_PCI_PMON_RAW_EVENT_MASK		(SNBEP_PMON_RAW_EVENT_MASK | \
+						 KNL_CHA_MSR_PMON_CTL_QOR)
+/* KNL PCU */
+#define KNL_PCU_PMON_CTL_EV_SEL_MASK		0x0000007f
+#define KNL_PCU_PMON_CTL_USE_OCC_CTR		(1 << 7)
+#define KNL_PCU_MSR_PMON_CTL_TRESH_MASK		0x3f000000
+#define KNL_PCU_MSR_PMON_RAW_EVENT_MASK	\
+				(KNL_PCU_PMON_CTL_EV_SEL_MASK | \
+				 KNL_PCU_PMON_CTL_USE_OCC_CTR | \
+				 SNBEP_PCU_MSR_PMON_CTL_OCC_SEL_MASK | \
+				 SNBEP_PMON_CTL_EDGE_DET | \
+				 SNBEP_CBO_PMON_CTL_TID_EN | \
+				 SNBEP_PMON_CTL_INVERT | \
+				 KNL_PCU_MSR_PMON_CTL_TRESH_MASK | \
+				 SNBEP_PCU_MSR_PMON_CTL_OCC_INVERT | \
+				 SNBEP_PCU_MSR_PMON_CTL_OCC_EDGE_DET)
 
 DEFINE_UNCORE_FORMAT_ATTR(event, event, "config:0-7");
+DEFINE_UNCORE_FORMAT_ATTR(event2, event, "config:0-6");
 DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
+DEFINE_UNCORE_FORMAT_ATTR(use_occ_ctr, use_occ_ctr, "config:7");
 DEFINE_UNCORE_FORMAT_ATTR(umask, umask, "config:8-15");
+DEFINE_UNCORE_FORMAT_ATTR(qor, qor, "config:16");
 DEFINE_UNCORE_FORMAT_ATTR(edge, edge, "config:18");
 DEFINE_UNCORE_FORMAT_ATTR(tid_en, tid_en, "config:19");
 DEFINE_UNCORE_FORMAT_ATTR(inv, inv, "config:23");
 DEFINE_UNCORE_FORMAT_ATTR(thresh8, thresh, "config:24-31");
+DEFINE_UNCORE_FORMAT_ATTR(thresh6, thresh, "config:24-29");
 DEFINE_UNCORE_FORMAT_ATTR(thresh5, thresh, "config:24-28");
 DEFINE_UNCORE_FORMAT_ATTR(occ_sel, occ_sel, "config:14-15");
 DEFINE_UNCORE_FORMAT_ATTR(occ_invert, occ_invert, "config:30");
 DEFINE_UNCORE_FORMAT_ATTR(occ_edge, occ_edge, "config:14-51");
+DEFINE_UNCORE_FORMAT_ATTR(occ_edge_det, occ_edge_det, "config:31");
 DEFINE_UNCORE_FORMAT_ATTR(filter_tid, filter_tid, "config1:0-4");
 DEFINE_UNCORE_FORMAT_ATTR(filter_tid2, filter_tid, "config1:0");
 DEFINE_UNCORE_FORMAT_ATTR(filter_tid3, filter_tid, "config1:0-5");
+DEFINE_UNCORE_FORMAT_ATTR(filter_tid4, filter_tid, "config1:0-8");
 DEFINE_UNCORE_FORMAT_ATTR(filter_cid, filter_cid, "config1:5");
 DEFINE_UNCORE_FORMAT_ATTR(filter_link, filter_link, "config1:5-8");
 DEFINE_UNCORE_FORMAT_ATTR(filter_link2, filter_link, "config1:6-8");
+DEFINE_UNCORE_FORMAT_ATTR(filter_link3, filter_link, "config1:12");
 DEFINE_UNCORE_FORMAT_ATTR(filter_nid, filter_nid, "config1:10-17");
 DEFINE_UNCORE_FORMAT_ATTR(filter_nid2, filter_nid, "config1:32-47");
 DEFINE_UNCORE_FORMAT_ATTR(filter_state, filter_state, "config1:18-22");
 DEFINE_UNCORE_FORMAT_ATTR(filter_state2, filter_state, "config1:17-22");
 DEFINE_UNCORE_FORMAT_ATTR(filter_state3, filter_state, "config1:17-23");
+DEFINE_UNCORE_FORMAT_ATTR(filter_state4, filter_state, "config1:18-20");
+DEFINE_UNCORE_FORMAT_ATTR(filter_local, filter_local, "config1:33");
+DEFINE_UNCORE_FORMAT_ATTR(filter_all_op, filter_all_op, "config1:35");
+DEFINE_UNCORE_FORMAT_ATTR(filter_nnm, filter_nnm, "config1:37");
 DEFINE_UNCORE_FORMAT_ATTR(filter_opc, filter_opc, "config1:23-31");
 DEFINE_UNCORE_FORMAT_ATTR(filter_opc2, filter_opc, "config1:52-60");
+DEFINE_UNCORE_FORMAT_ATTR(filter_opc3, filter_opc, "config1:41-60");
 DEFINE_UNCORE_FORMAT_ATTR(filter_nc, filter_nc, "config1:62");
 DEFINE_UNCORE_FORMAT_ATTR(filter_c6, filter_c6, "config1:61");
 DEFINE_UNCORE_FORMAT_ATTR(filter_isoc, filter_isoc, "config1:63");
@@ -315,8 +378,9 @@ static u64 snbep_uncore_pci_read_counter(struct intel_uncore_box *box, struct pe
 static void snbep_uncore_pci_init_box(struct intel_uncore_box *box)
 {
 	struct pci_dev *pdev = box->pci_dev;
+	int box_ctl = uncore_pci_box_ctl(box);
 
-	pci_write_config_dword(pdev, SNBEP_PCI_PMON_BOX_CTL, SNBEP_PMON_BOX_CTL_INT);
+	pci_write_config_dword(pdev, box_ctl, SNBEP_PMON_BOX_CTL_INT);
 }
 
 static void snbep_uncore_msr_disable_box(struct intel_uncore_box *box)
@@ -405,7 +469,7 @@ static struct attribute *snbep_uncore_cbox_formats_attr[] = {
 };
 
 static struct attribute *snbep_uncore_pcu_formats_attr[] = {
-	&format_attr_event_ext.attr,
+	&format_attr_event.attr,
 	&format_attr_occ_sel.attr,
 	&format_attr_edge.attr,
 	&format_attr_inv.attr,
@@ -919,7 +983,9 @@ static void snbep_qpi_enable_event(struct intel_uncore_box *box, struct perf_eve
 
 	if (reg1->idx != EXTRA_REG_NONE) {
 		int idx = box->pmu->pmu_idx + SNBEP_PCI_QPI_PORT0_FILTER;
-		struct pci_dev *filter_pdev = uncore_extra_pci_dev[box->phys_id][idx];
+		int pkg = topology_phys_to_logical_pkg(box->pci_phys_id);
+		struct pci_dev *filter_pdev = uncore_extra_pci_dev[pkg].dev[idx];
+
 		if (filter_pdev) {
 			pci_write_config_dword(filter_pdev, reg1->reg,
 						(u32)reg1->config);
@@ -1244,7 +1310,7 @@ static struct attribute *ivbep_uncore_cbox_formats_attr[] = {
 };
 
 static struct attribute *ivbep_uncore_pcu_formats_attr[] = {
-	&format_attr_event_ext.attr,
+	&format_attr_event.attr,
 	&format_attr_occ_sel.attr,
 	&format_attr_edge.attr,
 	&format_attr_thresh5.attr,
@@ -1728,6 +1794,419 @@ int ivbep_uncore_pci_init(void)
 }
 /* end of IvyTown uncore support */
 
+/* KNL uncore support */
+static struct attribute *knl_uncore_ubox_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask.attr,
+	&format_attr_edge.attr,
+	&format_attr_tid_en.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh5.attr,
+	NULL,
+};
+
+static struct attribute_group knl_uncore_ubox_format_group = {
+	.name = "format",
+	.attrs = knl_uncore_ubox_formats_attr,
+};
+
+static struct intel_uncore_type knl_uncore_ubox = {
+	.name			= "ubox",
+	.num_counters		= 2,
+	.num_boxes		= 1,
+	.perf_ctr_bits		= 48,
+	.fixed_ctr_bits		= 48,
+	.perf_ctr		= HSWEP_U_MSR_PMON_CTR0,
+	.event_ctl		= HSWEP_U_MSR_PMON_CTL0,
+	.event_mask		= KNL_U_MSR_PMON_RAW_EVENT_MASK,
+	.fixed_ctr		= HSWEP_U_MSR_PMON_UCLK_FIXED_CTR,
+	.fixed_ctl		= HSWEP_U_MSR_PMON_UCLK_FIXED_CTL,
+	.ops			= &snbep_uncore_msr_ops,
+	.format_group		= &knl_uncore_ubox_format_group,
+};
+
+static struct attribute *knl_uncore_cha_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask.attr,
+	&format_attr_qor.attr,
+	&format_attr_edge.attr,
+	&format_attr_tid_en.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh8.attr,
+	&format_attr_filter_tid4.attr,
+	&format_attr_filter_link3.attr,
+	&format_attr_filter_state4.attr,
+	&format_attr_filter_local.attr,
+	&format_attr_filter_all_op.attr,
+	&format_attr_filter_nnm.attr,
+	&format_attr_filter_opc3.attr,
+	&format_attr_filter_nc.attr,
+	&format_attr_filter_isoc.attr,
+	NULL,
+};
+
+static struct attribute_group knl_uncore_cha_format_group = {
+	.name = "format",
+	.attrs = knl_uncore_cha_formats_attr,
+};
+
+static struct event_constraint knl_uncore_cha_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x11, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x1f, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x36, 0x1),
+	EVENT_CONSTRAINT_END
+};
+
+static struct extra_reg knl_uncore_cha_extra_regs[] = {
+	SNBEP_CBO_EVENT_EXTRA_REG(SNBEP_CBO_PMON_CTL_TID_EN,
+				  SNBEP_CBO_PMON_CTL_TID_EN, 0x1),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x3d, 0xff, 0x2),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x35, 0xff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x36, 0xff, 0x4),
+	EVENT_EXTRA_END
+};
+
+static u64 knl_cha_filter_mask(int fields)
+{
+	u64 mask = 0;
+
+	if (fields & 0x1)
+		mask |= KNL_CHA_MSR_PMON_BOX_FILTER_TID;
+	if (fields & 0x2)
+		mask |= KNL_CHA_MSR_PMON_BOX_FILTER_STATE;
+	if (fields & 0x4)
+		mask |= KNL_CHA_MSR_PMON_BOX_FILTER_OP;
+	return mask;
+}
+
+static struct event_constraint *
+knl_cha_get_constraint(struct intel_uncore_box *box, struct perf_event *event)
+{
+	return __snbep_cbox_get_constraint(box, event, knl_cha_filter_mask);
+}
+
+static int knl_cha_hw_config(struct intel_uncore_box *box,
+			     struct perf_event *event)
+{
+	struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
+	struct extra_reg *er;
+	int idx = 0;
+
+	for (er = knl_uncore_cha_extra_regs; er->msr; er++) {
+		if (er->event != (event->hw.config & er->config_mask))
+			continue;
+		idx |= er->idx;
+	}
+
+	if (idx) {
+		reg1->reg = HSWEP_C0_MSR_PMON_BOX_FILTER0 +
+			    KNL_CHA_MSR_OFFSET * box->pmu->pmu_idx;
+		reg1->config = event->attr.config1 & knl_cha_filter_mask(idx);
+		reg1->idx = idx;
+	}
+	return 0;
+}
+
+static void hswep_cbox_enable_event(struct intel_uncore_box *box,
+				    struct perf_event *event);
+
+static struct intel_uncore_ops knl_uncore_cha_ops = {
+	.init_box		= snbep_uncore_msr_init_box,
+	.disable_box		= snbep_uncore_msr_disable_box,
+	.enable_box		= snbep_uncore_msr_enable_box,
+	.disable_event		= snbep_uncore_msr_disable_event,
+	.enable_event		= hswep_cbox_enable_event,
+	.read_counter		= uncore_msr_read_counter,
+	.hw_config		= knl_cha_hw_config,
+	.get_constraint		= knl_cha_get_constraint,
+	.put_constraint		= snbep_cbox_put_constraint,
+};
+
+static struct intel_uncore_type knl_uncore_cha = {
+	.name			= "cha",
+	.num_counters		= 4,
+	.num_boxes		= 38,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= HSWEP_C0_MSR_PMON_CTL0,
+	.perf_ctr		= HSWEP_C0_MSR_PMON_CTR0,
+	.event_mask		= KNL_CHA_MSR_PMON_RAW_EVENT_MASK,
+	.box_ctl		= HSWEP_C0_MSR_PMON_BOX_CTL,
+	.msr_offset		= KNL_CHA_MSR_OFFSET,
+	.num_shared_regs	= 1,
+	.constraints		= knl_uncore_cha_constraints,
+	.ops			= &knl_uncore_cha_ops,
+	.format_group		= &knl_uncore_cha_format_group,
+};
+
+static struct attribute *knl_uncore_pcu_formats_attr[] = {
+	&format_attr_event2.attr,
+	&format_attr_use_occ_ctr.attr,
+	&format_attr_occ_sel.attr,
+	&format_attr_edge.attr,
+	&format_attr_tid_en.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh6.attr,
+	&format_attr_occ_invert.attr,
+	&format_attr_occ_edge_det.attr,
+	NULL,
+};
+
+static struct attribute_group knl_uncore_pcu_format_group = {
+	.name = "format",
+	.attrs = knl_uncore_pcu_formats_attr,
+};
+
+static struct intel_uncore_type knl_uncore_pcu = {
+	.name			= "pcu",
+	.num_counters		= 4,
+	.num_boxes		= 1,
+	.perf_ctr_bits		= 48,
+	.perf_ctr		= HSWEP_PCU_MSR_PMON_CTR0,
+	.event_ctl		= HSWEP_PCU_MSR_PMON_CTL0,
+	.event_mask		= KNL_PCU_MSR_PMON_RAW_EVENT_MASK,
+	.box_ctl		= HSWEP_PCU_MSR_PMON_BOX_CTL,
+	.ops			= &snbep_uncore_msr_ops,
+	.format_group		= &knl_uncore_pcu_format_group,
+};
+
+static struct intel_uncore_type *knl_msr_uncores[] = {
+	&knl_uncore_ubox,
+	&knl_uncore_cha,
+	&knl_uncore_pcu,
+	NULL,
+};
+
+void knl_uncore_cpu_init(void)
+{
+	uncore_msr_uncores = knl_msr_uncores;
+}
+
+static void knl_uncore_imc_enable_box(struct intel_uncore_box *box)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	int box_ctl = uncore_pci_box_ctl(box);
+
+	pci_write_config_dword(pdev, box_ctl, 0);
+}
+
+static void knl_uncore_imc_enable_event(struct intel_uncore_box *box,
+					struct perf_event *event)
+{
+	struct pci_dev *pdev = box->pci_dev;
+	struct hw_perf_event *hwc = &event->hw;
+
+	if ((event->attr.config & SNBEP_PMON_CTL_EV_SEL_MASK)
+							== UNCORE_FIXED_EVENT)
+		pci_write_config_dword(pdev, hwc->config_base,
+				       hwc->config | KNL_PMON_FIXED_CTL_EN);
+	else
+		pci_write_config_dword(pdev, hwc->config_base,
+				       hwc->config | SNBEP_PMON_CTL_EN);
+}
+
+static struct intel_uncore_ops knl_uncore_imc_ops = {
+	.init_box	= snbep_uncore_pci_init_box,
+	.disable_box	= snbep_uncore_pci_disable_box,
+	.enable_box	= knl_uncore_imc_enable_box,
+	.read_counter	= snbep_uncore_pci_read_counter,
+	.enable_event	= knl_uncore_imc_enable_event,
+	.disable_event	= snbep_uncore_pci_disable_event,
+};
+
+static struct intel_uncore_type knl_uncore_imc_uclk = {
+	.name			= "imc_uclk",
+	.num_counters		= 4,
+	.num_boxes		= 2,
+	.perf_ctr_bits		= 48,
+	.fixed_ctr_bits		= 48,
+	.perf_ctr		= KNL_UCLK_MSR_PMON_CTR0_LOW,
+	.event_ctl		= KNL_UCLK_MSR_PMON_CTL0,
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.fixed_ctr		= KNL_UCLK_MSR_PMON_UCLK_FIXED_LOW,
+	.fixed_ctl		= KNL_UCLK_MSR_PMON_UCLK_FIXED_CTL,
+	.box_ctl		= KNL_UCLK_MSR_PMON_BOX_CTL,
+	.ops			= &knl_uncore_imc_ops,
+	.format_group		= &snbep_uncore_format_group,
+};
+
+static struct intel_uncore_type knl_uncore_imc_dclk = {
+	.name			= "imc",
+	.num_counters		= 4,
+	.num_boxes		= 6,
+	.perf_ctr_bits		= 48,
+	.fixed_ctr_bits		= 48,
+	.perf_ctr		= KNL_MC0_CH0_MSR_PMON_CTR0_LOW,
+	.event_ctl		= KNL_MC0_CH0_MSR_PMON_CTL0,
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.fixed_ctr		= KNL_MC0_CH0_MSR_PMON_FIXED_LOW,
+	.fixed_ctl		= KNL_MC0_CH0_MSR_PMON_FIXED_CTL,
+	.box_ctl		= KNL_MC0_CH0_MSR_PMON_BOX_CTL,
+	.ops			= &knl_uncore_imc_ops,
+	.format_group		= &snbep_uncore_format_group,
+};
+
+static struct intel_uncore_type knl_uncore_edc_uclk = {
+	.name			= "edc_uclk",
+	.num_counters		= 4,
+	.num_boxes		= 8,
+	.perf_ctr_bits		= 48,
+	.fixed_ctr_bits		= 48,
+	.perf_ctr		= KNL_UCLK_MSR_PMON_CTR0_LOW,
+	.event_ctl		= KNL_UCLK_MSR_PMON_CTL0,
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.fixed_ctr		= KNL_UCLK_MSR_PMON_UCLK_FIXED_LOW,
+	.fixed_ctl		= KNL_UCLK_MSR_PMON_UCLK_FIXED_CTL,
+	.box_ctl		= KNL_UCLK_MSR_PMON_BOX_CTL,
+	.ops			= &knl_uncore_imc_ops,
+	.format_group		= &snbep_uncore_format_group,
+};
+
+static struct intel_uncore_type knl_uncore_edc_eclk = {
+	.name			= "edc_eclk",
+	.num_counters		= 4,
+	.num_boxes		= 8,
+	.perf_ctr_bits		= 48,
+	.fixed_ctr_bits		= 48,
+	.perf_ctr		= KNL_EDC0_ECLK_MSR_PMON_CTR0_LOW,
+	.event_ctl		= KNL_EDC0_ECLK_MSR_PMON_CTL0,
+	.event_mask		= SNBEP_PMON_RAW_EVENT_MASK,
+	.fixed_ctr		= KNL_EDC0_ECLK_MSR_PMON_ECLK_FIXED_LOW,
+	.fixed_ctl		= KNL_EDC0_ECLK_MSR_PMON_ECLK_FIXED_CTL,
+	.box_ctl		= KNL_EDC0_ECLK_MSR_PMON_BOX_CTL,
+	.ops			= &knl_uncore_imc_ops,
+	.format_group		= &snbep_uncore_format_group,
+};
+
+static struct event_constraint knl_uncore_m2pcie_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x23, 0x3),
+	EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type knl_uncore_m2pcie = {
+	.name		= "m2pcie",
+	.num_counters   = 4,
+	.num_boxes	= 1,
+	.perf_ctr_bits	= 48,
+	.constraints	= knl_uncore_m2pcie_constraints,
+	SNBEP_UNCORE_PCI_COMMON_INIT(),
+};
+
+static struct attribute *knl_uncore_irp_formats_attr[] = {
+	&format_attr_event.attr,
+	&format_attr_umask.attr,
+	&format_attr_qor.attr,
+	&format_attr_edge.attr,
+	&format_attr_inv.attr,
+	&format_attr_thresh8.attr,
+	NULL,
+};
+
+static struct attribute_group knl_uncore_irp_format_group = {
+	.name = "format",
+	.attrs = knl_uncore_irp_formats_attr,
+};
+
+static struct intel_uncore_type knl_uncore_irp = {
+	.name			= "irp",
+	.num_counters		= 2,
+	.num_boxes		= 1,
+	.perf_ctr_bits		= 48,
+	.perf_ctr		= SNBEP_PCI_PMON_CTR0,
+	.event_ctl		= SNBEP_PCI_PMON_CTL0,
+	.event_mask		= KNL_IRP_PCI_PMON_RAW_EVENT_MASK,
+	.box_ctl		= KNL_IRP_PCI_PMON_BOX_CTL,
+	.ops			= &snbep_uncore_pci_ops,
+	.format_group		= &knl_uncore_irp_format_group,
+};
+
+enum {
+	KNL_PCI_UNCORE_MC_UCLK,
+	KNL_PCI_UNCORE_MC_DCLK,
+	KNL_PCI_UNCORE_EDC_UCLK,
+	KNL_PCI_UNCORE_EDC_ECLK,
+	KNL_PCI_UNCORE_M2PCIE,
+	KNL_PCI_UNCORE_IRP,
+};
+
+static struct intel_uncore_type *knl_pci_uncores[] = {
+	[KNL_PCI_UNCORE_MC_UCLK]	= &knl_uncore_imc_uclk,
+	[KNL_PCI_UNCORE_MC_DCLK]	= &knl_uncore_imc_dclk,
+	[KNL_PCI_UNCORE_EDC_UCLK]	= &knl_uncore_edc_uclk,
+	[KNL_PCI_UNCORE_EDC_ECLK]	= &knl_uncore_edc_eclk,
+	[KNL_PCI_UNCORE_M2PCIE]		= &knl_uncore_m2pcie,
+	[KNL_PCI_UNCORE_IRP]		= &knl_uncore_irp,
+	NULL,
+};
+
+/*
+ * KNL uses a common PCI device ID for multiple instances of an Uncore PMU
+ * device type. prior to KNL, each instance of a PMU device type had a unique
+ * device ID.
+ *
+ *	PCI Device ID	Uncore PMU Devices
+ *	----------------------------------
+ *	0x7841		MC0 UClk, MC1 UClk
+ *	0x7843		MC0 DClk CH 0, MC0 DClk CH 1, MC0 DClk CH 2,
+ *			MC1 DClk CH 0, MC1 DClk CH 1, MC1 DClk CH 2
+ *	0x7833		EDC0 UClk, EDC1 UClk, EDC2 UClk, EDC3 UClk,
+ *			EDC4 UClk, EDC5 UClk, EDC6 UClk, EDC7 UClk
+ *	0x7835		EDC0 EClk, EDC1 EClk, EDC2 EClk, EDC3 EClk,
+ *			EDC4 EClk, EDC5 EClk, EDC6 EClk, EDC7 EClk
+ *	0x7817		M2PCIe
+ *	0x7814		IRP
+*/
+
+static const struct pci_device_id knl_uncore_pci_ids[] = {
+	{ /* MC UClk */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7841),
+		.driver_data = UNCORE_PCI_DEV_DATA(KNL_PCI_UNCORE_MC_UCLK, 0),
+	},
+	{ /* MC DClk Channel */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7843),
+		.driver_data = UNCORE_PCI_DEV_DATA(KNL_PCI_UNCORE_MC_DCLK, 0),
+	},
+	{ /* EDC UClk */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7833),
+		.driver_data = UNCORE_PCI_DEV_DATA(KNL_PCI_UNCORE_EDC_UCLK, 0),
+	},
+	{ /* EDC EClk */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7835),
+		.driver_data = UNCORE_PCI_DEV_DATA(KNL_PCI_UNCORE_EDC_ECLK, 0),
+	},
+	{ /* M2PCIe */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7817),
+		.driver_data = UNCORE_PCI_DEV_DATA(KNL_PCI_UNCORE_M2PCIE, 0),
+	},
+	{ /* IRP */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x7814),
+		.driver_data = UNCORE_PCI_DEV_DATA(KNL_PCI_UNCORE_IRP, 0),
+	},
+	{ /* end: all zeroes */ }
+};
+
+static struct pci_driver knl_uncore_pci_driver = {
+	.name		= "knl_uncore",
+	.id_table	= knl_uncore_pci_ids,
+};
+
+int knl_uncore_pci_init(void)
+{
+	int ret;
+
+	/* All KNL PCI based PMON units are on the same PCI bus except IRP */
+	ret = snb_pci2phy_map_init(0x7814); /* IRP */
+	if (ret)
+		return ret;
+	ret = snb_pci2phy_map_init(0x7817); /* M2PCIe */
+	if (ret)
+		return ret;
+	uncore_pci_uncores = knl_pci_uncores;
+	uncore_pci_driver = &knl_uncore_pci_driver;
+	return 0;
+}
+
+/* end of KNL uncore support */
+
 /* Haswell-EP uncore support */
 static struct attribute *hswep_uncore_ubox_formats_attr[] = {
 	&format_attr_event.attr,
@@ -2040,14 +2519,16 @@ static struct intel_uncore_type *hswep_msr_uncores[] = {
 
 void hswep_uncore_cpu_init(void)
 {
+	int pkg = topology_phys_to_logical_pkg(0);
+
 	if (hswep_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
 		hswep_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
 
 	/* Detect 6-8 core systems with only two SBOXes */
-	if (uncore_extra_pci_dev[0][HSWEP_PCI_PCU_3]) {
+	if (uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3]) {
 		u32 capid4;
 
-		pci_read_config_dword(uncore_extra_pci_dev[0][HSWEP_PCI_PCU_3],
+		pci_read_config_dword(uncore_extra_pci_dev[pkg].dev[HSWEP_PCI_PCU_3],
 				      0x94, &capid4);
 		if (((capid4 >> 6) & 0x3) == 0)
 			hswep_uncore_sbox.num_boxes = 2;
@@ -2338,7 +2819,7 @@ int hswep_uncore_pci_init(void)
 }
 /* end of Haswell-EP uncore support */
 
-/* BDX-DE uncore support */
+/* BDX uncore support */
 
 static struct intel_uncore_type bdx_uncore_ubox = {
 	.name			= "ubox",
@@ -2360,13 +2841,14 @@ static struct event_constraint bdx_uncore_cbox_constraints[] = {
 	UNCORE_EVENT_CONSTRAINT(0x09, 0x3),
 	UNCORE_EVENT_CONSTRAINT(0x11, 0x1),
 	UNCORE_EVENT_CONSTRAINT(0x36, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x3e, 0x1),
 	EVENT_CONSTRAINT_END
 };
 
 static struct intel_uncore_type bdx_uncore_cbox = {
 	.name			= "cbox",
 	.num_counters		= 4,
-	.num_boxes		= 8,
+	.num_boxes		= 24,
 	.perf_ctr_bits		= 48,
 	.event_ctl		= HSWEP_C0_MSR_PMON_CTL0,
 	.perf_ctr		= HSWEP_C0_MSR_PMON_CTR0,
@@ -2379,10 +2861,27 @@ static struct intel_uncore_type bdx_uncore_cbox = {
 	.format_group		= &hswep_uncore_cbox_format_group,
 };
 
+static struct intel_uncore_type bdx_uncore_sbox = {
+	.name			= "sbox",
+	.num_counters		= 4,
+	.num_boxes		= 4,
+	.perf_ctr_bits		= 48,
+	.event_ctl		= HSWEP_S0_MSR_PMON_CTL0,
+	.perf_ctr		= HSWEP_S0_MSR_PMON_CTR0,
+	.event_mask		= HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
+	.box_ctl		= HSWEP_S0_MSR_PMON_BOX_CTL,
+	.msr_offset		= HSWEP_SBOX_MSR_OFFSET,
+	.ops			= &hswep_uncore_sbox_msr_ops,
+	.format_group		= &hswep_uncore_sbox_format_group,
+};
+
+#define BDX_MSR_UNCORE_SBOX	3
+
 static struct intel_uncore_type *bdx_msr_uncores[] = {
 	&bdx_uncore_ubox,
 	&bdx_uncore_cbox,
 	&hswep_uncore_pcu,
+	&bdx_uncore_sbox,
 	NULL,
 };
 
@@ -2391,12 +2890,16 @@ void bdx_uncore_cpu_init(void)
 	if (bdx_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
 		bdx_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
 	uncore_msr_uncores = bdx_msr_uncores;
+
+	/* BDX-DE doesn't have SBOX */
+	if (boot_cpu_data.x86_model == 86)
+		uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
 }
 
 static struct intel_uncore_type bdx_uncore_ha = {
 	.name		= "ha",
 	.num_counters   = 4,
-	.num_boxes	= 1,
+	.num_boxes	= 2,
 	.perf_ctr_bits	= 48,
 	SNBEP_UNCORE_PCI_COMMON_INIT(),
 };
@@ -2404,7 +2907,7 @@ static struct intel_uncore_type bdx_uncore_ha = {
 static struct intel_uncore_type bdx_uncore_imc = {
 	.name		= "imc",
 	.num_counters   = 5,
-	.num_boxes	= 2,
+	.num_boxes	= 8,
 	.perf_ctr_bits	= 48,
 	.fixed_ctr_bits	= 48,
 	.fixed_ctr	= SNBEP_MC_CHy_PCI_PMON_FIXED_CTR,
@@ -2424,6 +2927,19 @@ static struct intel_uncore_type bdx_uncore_irp = {
 	.format_group		= &snbep_uncore_format_group,
 };
 
+static struct intel_uncore_type bdx_uncore_qpi = {
+	.name			= "qpi",
+	.num_counters		= 4,
+	.num_boxes		= 3,
+	.perf_ctr_bits		= 48,
+	.perf_ctr		= SNBEP_PCI_PMON_CTR0,
+	.event_ctl		= SNBEP_PCI_PMON_CTL0,
+	.event_mask		= SNBEP_QPI_PCI_PMON_RAW_EVENT_MASK,
+	.box_ctl		= SNBEP_PCI_PMON_BOX_CTL,
+	.num_shared_regs	= 1,
+	.ops			= &snbep_uncore_qpi_ops,
+	.format_group		= &snbep_uncore_qpi_format_group,
+};
 
 static struct event_constraint bdx_uncore_r2pcie_constraints[] = {
 	UNCORE_EVENT_CONSTRAINT(0x10, 0x3),
@@ -2432,6 +2948,8 @@ static struct event_constraint bdx_uncore_r2pcie_constraints[] = {
 	UNCORE_EVENT_CONSTRAINT(0x23, 0x1),
 	UNCORE_EVENT_CONSTRAINT(0x25, 0x1),
 	UNCORE_EVENT_CONSTRAINT(0x26, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x28, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x2c, 0x3),
 	UNCORE_EVENT_CONSTRAINT(0x2d, 0x3),
 	EVENT_CONSTRAINT_END
 };
@@ -2445,18 +2963,65 @@ static struct intel_uncore_type bdx_uncore_r2pcie = {
 	SNBEP_UNCORE_PCI_COMMON_INIT(),
 };
 
+static struct event_constraint bdx_uncore_r3qpi_constraints[] = {
+	UNCORE_EVENT_CONSTRAINT(0x01, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x07, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x08, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x09, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x0a, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x0e, 0x7),
+	UNCORE_EVENT_CONSTRAINT(0x10, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x11, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x13, 0x1),
+	UNCORE_EVENT_CONSTRAINT(0x14, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x15, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x1f, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x20, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x21, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x22, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x23, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x25, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x26, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x28, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x29, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x2c, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x2d, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x2e, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x2f, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x33, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x34, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x36, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x37, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x38, 0x3),
+	UNCORE_EVENT_CONSTRAINT(0x39, 0x3),
+	EVENT_CONSTRAINT_END
+};
+
+static struct intel_uncore_type bdx_uncore_r3qpi = {
+	.name		= "r3qpi",
+	.num_counters   = 3,
+	.num_boxes	= 3,
+	.perf_ctr_bits	= 48,
+	.constraints	= bdx_uncore_r3qpi_constraints,
+	SNBEP_UNCORE_PCI_COMMON_INIT(),
+};
+
 enum {
 	BDX_PCI_UNCORE_HA,
 	BDX_PCI_UNCORE_IMC,
 	BDX_PCI_UNCORE_IRP,
+	BDX_PCI_UNCORE_QPI,
 	BDX_PCI_UNCORE_R2PCIE,
+	BDX_PCI_UNCORE_R3QPI,
 };
 
 static struct intel_uncore_type *bdx_pci_uncores[] = {
 	[BDX_PCI_UNCORE_HA]	= &bdx_uncore_ha,
 	[BDX_PCI_UNCORE_IMC]	= &bdx_uncore_imc,
 	[BDX_PCI_UNCORE_IRP]	= &bdx_uncore_irp,
+	[BDX_PCI_UNCORE_QPI]	= &bdx_uncore_qpi,
 	[BDX_PCI_UNCORE_R2PCIE]	= &bdx_uncore_r2pcie,
+	[BDX_PCI_UNCORE_R3QPI]	= &bdx_uncore_r3qpi,
 	NULL,
 };
 
@@ -2465,6 +3030,10 @@ static const struct pci_device_id bdx_uncore_pci_ids[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f30),
 		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_HA, 0),
 	},
+	{ /* Home Agent 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f38),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_HA, 1),
+	},
 	{ /* MC0 Channel 0 */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fb0),
 		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 0),
@@ -2473,14 +3042,74 @@ static const struct pci_device_id bdx_uncore_pci_ids[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fb1),
 		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 1),
 	},
+	{ /* MC0 Channel 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fb4),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 2),
+	},
+	{ /* MC0 Channel 3 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fb5),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 3),
+	},
+	{ /* MC1 Channel 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fd0),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 4),
+	},
+	{ /* MC1 Channel 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fd1),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 5),
+	},
+	{ /* MC1 Channel 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fd4),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 6),
+	},
+	{ /* MC1 Channel 3 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fd5),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IMC, 7),
+	},
 	{ /* IRP */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f39),
 		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_IRP, 0),
 	},
+	{ /* QPI0 Port 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f32),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_QPI, 0),
+	},
+	{ /* QPI0 Port 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f33),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_QPI, 1),
+	},
+	{ /* QPI1 Port 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f3a),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_QPI, 2),
+	},
 	{ /* R2PCIe */
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f34),
 		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_R2PCIE, 0),
 	},
+	{ /* R3QPI0 Link 0 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f36),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_R3QPI, 0),
+	},
+	{ /* R3QPI0 Link 1 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f37),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_R3QPI, 1),
+	},
+	{ /* R3QPI1 Link 2 */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f3e),
+		.driver_data = UNCORE_PCI_DEV_DATA(BDX_PCI_UNCORE_R3QPI, 2),
+	},
+	{ /* QPI Port 0 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f86),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, 0),
+	},
+	{ /* QPI Port 1 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f96),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, 1),
+	},
+	{ /* QPI Port 2 filter  */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f46),
+		.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, 2),
+	},
 	{ /* end: all zeroes */ }
 };
 
@@ -2500,4 +3129,4 @@ int bdx_uncore_pci_init(void)
 	return 0;
 }
 
-/* end of BDX-DE uncore support */
+/* end of BDX uncore support */
diff --git a/arch/x86/kernel/cpu/perf_event_msr.c b/arch/x86/events/msr.c
index f32ac13934f2..ec863b9a9f78 100644
--- a/arch/x86/kernel/cpu/perf_event_msr.c
+++ b/arch/x86/events/msr.c
@@ -163,10 +163,9 @@ again:
 		goto again;
 
 	delta = now - prev;
-	if (unlikely(event->hw.event_base == MSR_SMI_COUNT)) {
-		delta <<= 32;
-		delta >>= 32; /* sign extend */
-	}
+	if (unlikely(event->hw.event_base == MSR_SMI_COUNT))
+		delta = sign_extend64(delta, 31);
+
 	local64_add(now - prev, &event->count);
 }
 
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/events/perf_event.h
index 499f533dd3cc..ad4dc7ffffb5 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -5,7 +5,7 @@
  *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
- *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra
  *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
  *  Copyright (C) 2009 Google, Inc., Stephane Eranian
  *
@@ -14,17 +14,7 @@
 
 #include <linux/perf_event.h>
 
-#if 0
-#undef wrmsrl
-#define wrmsrl(msr, val) 						\
-do {									\
-	unsigned int _msr = (msr);					\
-	u64 _val = (val);						\
-	trace_printk("wrmsrl(%x, %Lx)\n", (unsigned int)(_msr),		\
-			(unsigned long long)(_val));			\
-	native_write_msr((_msr), (u32)(_val), (u32)(_val >> 32));	\
-} while (0)
-#endif
+/* To enable MSR tracing please use the generic trace points. */
 
 /*
  *          |   NHM/WSM    |      SNB     |
@@ -282,7 +272,7 @@ struct cpu_hw_events {
  * events to select for counter rescheduling.
  *
  * Care must be taken as the rescheduling algorithm is O(n!) which
- * will increase scheduling cycles for an over-commited system
+ * will increase scheduling cycles for an over-committed system
  * dramatically.  The number of such EVENT_CONSTRAINT_OVERLAP() macros
  * and its counter masks must be kept at a minimum.
  */
@@ -318,6 +308,10 @@ struct cpu_hw_events {
 #define INTEL_UEVENT_CONSTRAINT(c, n)	\
 	EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK)
 
+/* Constraint on specific umask bit only + event */
+#define INTEL_UBIT_EVENT_CONSTRAINT(c, n)	\
+	EVENT_CONSTRAINT(c, n, ARCH_PERFMON_EVENTSEL_EVENT|(c))
+
 /* Like UEVENT_CONSTRAINT, but match flags too */
 #define INTEL_FLAGS_UEVENT_CONSTRAINT(c, n)	\
 	EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK|X86_ALL_EVENT_FLAGS)
@@ -387,7 +381,7 @@ struct cpu_hw_events {
 /* Check flags and event code/umask, and set the HSW N/A flag */
 #define INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA(code, n) \
 	__EVENT_CONSTRAINT(code, n, 			\
-			  INTEL_ARCH_EVENT_MASK|INTEL_ARCH_EVENT_MASK, \
+			  INTEL_ARCH_EVENT_MASK|X86_ALL_EVENT_FLAGS, \
 			  HWEIGHT(n), 0, PERF_X86_EVENT_PEBS_NA_HSW)
 
 
@@ -589,8 +583,10 @@ struct x86_pmu {
 			bts_active	:1,
 			pebs		:1,
 			pebs_active	:1,
-			pebs_broken	:1;
+			pebs_broken	:1,
+			pebs_prec_dist	:1;
 	int		pebs_record_size;
+	int		pebs_buffer_size;
 	void		(*drain_pebs)(struct pt_regs *regs);
 	struct event_constraint *pebs_constraints;
 	void		(*pebs_aliases)(struct perf_event *event);
@@ -612,6 +608,11 @@ struct x86_pmu {
 	atomic_t	lbr_exclusive[x86_lbr_exclusive_max];
 
 	/*
+	 * AMD bits
+	 */
+	unsigned int	amd_nb_constraints : 1;
+
+	/*
 	 * Extra registers for events
 	 */
 	struct extra_reg *extra_regs;
@@ -627,6 +628,7 @@ struct x86_perf_task_context {
 	u64 lbr_from[MAX_LBR_ENTRIES];
 	u64 lbr_to[MAX_LBR_ENTRIES];
 	u64 lbr_info[MAX_LBR_ENTRIES];
+	int tos;
 	int lbr_callstack_users;
 	int lbr_stack_state;
 };
@@ -798,6 +800,9 @@ ssize_t intel_event_sysfs_show(char *page, u64 config);
 
 struct attribute **merge_attr(struct attribute **a, struct attribute **b);
 
+ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr,
+			  char *page);
+
 #ifdef CONFIG_CPU_SUP_AMD
 
 int amd_pmu_init(void);
@@ -864,6 +869,8 @@ extern struct event_constraint intel_ivb_pebs_event_constraints[];
 
 extern struct event_constraint intel_hsw_pebs_event_constraints[];
 
+extern struct event_constraint intel_bdw_pebs_event_constraints[];
+
 extern struct event_constraint intel_skl_pebs_event_constraints[];
 
 struct event_constraint *intel_pebs_constraints(struct perf_event *event);
@@ -906,6 +913,10 @@ void intel_pmu_lbr_init_hsw(void);
 
 void intel_pmu_lbr_init_skl(void);
 
+void intel_pmu_lbr_init_knl(void);
+
+void intel_pmu_pebs_data_source_nhm(void);
+
 int intel_pmu_setup_lbr_filter(struct perf_event *event);
 
 void intel_pt_interrupt(void);
@@ -922,9 +933,6 @@ int p6_pmu_init(void);
 
 int knc_pmu_init(void);
 
-ssize_t events_sysfs_show(struct device *dev, struct device_attribute *attr,
-			  char *page);
-
 static inline int is_ht_workaround_enabled(void)
 {
 	return !!(x86_pmu.flags & PMU_FL_EXCL_ENABLED);
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 7bfc85bbb8ff..99afb665a004 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -152,12 +152,6 @@ static inline int alternatives_text_reserved(void *start, void *end)
 	".popsection"
 
 /*
- * This must be included *after* the definition of ALTERNATIVE due to
- * <asm/arch_hweight.h>
- */
-#include <asm/cpufeature.h>
-
-/*
  * Alternative instructions for different CPU types or capabilities.
  *
  * This allows to use optimized instructions even on generic binary
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index 3c56ef1ae068..5e828da2e18f 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -27,15 +27,23 @@ struct amd_l3_cache {
 };
 
 struct threshold_block {
-	unsigned int		block;
-	unsigned int		bank;
-	unsigned int		cpu;
-	u32			address;
-	u16			interrupt_enable;
-	bool			interrupt_capable;
-	u16			threshold_limit;
-	struct kobject		kobj;
-	struct list_head	miscj;
+	unsigned int	 block;			/* Number within bank */
+	unsigned int	 bank;			/* MCA bank the block belongs to */
+	unsigned int	 cpu;			/* CPU which controls MCA bank */
+	u32		 address;		/* MSR address for the block */
+	u16		 interrupt_enable;	/* Enable/Disable APIC interrupt */
+	bool		 interrupt_capable;	/* Bank can generate an interrupt. */
+
+	u16		 threshold_limit;	/*
+						 * Value upon which threshold
+						 * interrupt is generated.
+						 */
+
+	struct kobject	 kobj;			/* sysfs object */
+	struct list_head miscj;			/*
+						 * List of threshold blocks
+						 * within a bank.
+						 */
 };
 
 struct threshold_bank {
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index a30316bf801a..98f25bbafac4 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -6,7 +6,6 @@
 
 #include <asm/alternative.h>
 #include <asm/cpufeature.h>
-#include <asm/processor.h>
 #include <asm/apicdef.h>
 #include <linux/atomic.h>
 #include <asm/fixmap.h>
@@ -23,6 +22,11 @@
 #define APIC_VERBOSE 1
 #define APIC_DEBUG   2
 
+/* Macros for apic_extnmi which controls external NMI masking */
+#define APIC_EXTNMI_BSP		0 /* Default */
+#define APIC_EXTNMI_ALL		1
+#define APIC_EXTNMI_NONE	2
+
 /*
  * Define the default level of output to be very little
  * This can be turned up by using apic=verbose for more
@@ -303,6 +307,7 @@ struct apic {
 				      unsigned int *apicid);
 
 	/* ipi */
+	void (*send_IPI)(int cpu, int vector);
 	void (*send_IPI_mask)(const struct cpumask *mask, int vector);
 	void (*send_IPI_mask_allbutself)(const struct cpumask *mask,
 					 int vector);
@@ -638,8 +643,8 @@ static inline void entering_irq(void)
 
 static inline void entering_ack_irq(void)
 {
-	ack_APIC_irq();
 	entering_irq();
+	ack_APIC_irq();
 }
 
 static inline void ipi_entering_ack_irq(void)
diff --git a/arch/x86/include/asm/arch_hweight.h b/arch/x86/include/asm/arch_hweight.h
index 259a7c1ef709..02e799fa43d1 100644
--- a/arch/x86/include/asm/arch_hweight.h
+++ b/arch/x86/include/asm/arch_hweight.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_HWEIGHT_H
 #define _ASM_X86_HWEIGHT_H
 
+#include <asm/cpufeatures.h>
+
 #ifdef CONFIG_64BIT
 /* popcnt %edi, %eax -- redundant REX prefix for alignment */
 #define POPCNT32 ".byte 0xf3,0x40,0x0f,0xb8,0xc7"
diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
index 189679aba703..f5063b6659eb 100644
--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -44,19 +44,22 @@
 
 /* Exception table entry */
 #ifdef __ASSEMBLY__
-# define _ASM_EXTABLE(from,to)					\
+# define _ASM_EXTABLE_HANDLE(from, to, handler)			\
 	.pushsection "__ex_table","a" ;				\
-	.balign 8 ;						\
+	.balign 4 ;						\
 	.long (from) - . ;					\
 	.long (to) - . ;					\
+	.long (handler) - . ;					\
 	.popsection
 
-# define _ASM_EXTABLE_EX(from,to)				\
-	.pushsection "__ex_table","a" ;				\
-	.balign 8 ;						\
-	.long (from) - . ;					\
-	.long (to) - . + 0x7ffffff0 ;				\
-	.popsection
+# define _ASM_EXTABLE(from, to)					\
+	_ASM_EXTABLE_HANDLE(from, to, ex_handler_default)
+
+# define _ASM_EXTABLE_FAULT(from, to)				\
+	_ASM_EXTABLE_HANDLE(from, to, ex_handler_fault)
+
+# define _ASM_EXTABLE_EX(from, to)				\
+	_ASM_EXTABLE_HANDLE(from, to, ex_handler_ext)
 
 # define _ASM_NOKPROBE(entry)					\
 	.pushsection "_kprobe_blacklist","aw" ;			\
@@ -89,19 +92,24 @@
 	.endm
 
 #else
-# define _ASM_EXTABLE(from,to)					\
+# define _EXPAND_EXTABLE_HANDLE(x) #x
+# define _ASM_EXTABLE_HANDLE(from, to, handler)			\
 	" .pushsection \"__ex_table\",\"a\"\n"			\
-	" .balign 8\n"						\
+	" .balign 4\n"						\
 	" .long (" #from ") - .\n"				\
 	" .long (" #to ") - .\n"				\
+	" .long (" _EXPAND_EXTABLE_HANDLE(handler) ") - .\n"	\
 	" .popsection\n"
 
-# define _ASM_EXTABLE_EX(from,to)				\
-	" .pushsection \"__ex_table\",\"a\"\n"			\
-	" .balign 8\n"						\
-	" .long (" #from ") - .\n"				\
-	" .long (" #to ") - . + 0x7ffffff0\n"			\
-	" .popsection\n"
+# define _ASM_EXTABLE(from, to)					\
+	_ASM_EXTABLE_HANDLE(from, to, ex_handler_default)
+
+# define _ASM_EXTABLE_FAULT(from, to)				\
+	_ASM_EXTABLE_HANDLE(from, to, ex_handler_fault)
+
+# define _ASM_EXTABLE_EX(from, to)				\
+	_ASM_EXTABLE_HANDLE(from, to, ex_handler_ext)
+
 /* For C file, we already have NOKPROBE_SYMBOL macro */
 #endif
 
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index ae5fb83e6d91..3e8674288198 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -3,7 +3,6 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
-#include <asm/processor.h>
 #include <asm/alternative.h>
 #include <asm/cmpxchg.h>
 #include <asm/rmwcc.h>
diff --git a/arch/x86/include/asm/atomic64_32.h b/arch/x86/include/asm/atomic64_32.h
index a11c30b77fb5..a984111135b1 100644
--- a/arch/x86/include/asm/atomic64_32.h
+++ b/arch/x86/include/asm/atomic64_32.h
@@ -3,7 +3,6 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
-#include <asm/processor.h>
 //#include <asm/cmpxchg.h>
 
 /* An 64bit atomic type */
diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h
index 0681d2532527..bfb28caf97b1 100644
--- a/arch/x86/include/asm/barrier.h
+++ b/arch/x86/include/asm/barrier.h
@@ -6,18 +6,17 @@
 
 /*
  * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
+ * And yes, this might be required on UP too when we're talking
  * to devices.
  */
 
 #ifdef CONFIG_X86_32
-/*
- * Some non-Intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
+#define mb() asm volatile(ALTERNATIVE("lock; addl $0,0(%%esp)", "mfence", \
+				      X86_FEATURE_XMM2) ::: "memory", "cc")
+#define rmb() asm volatile(ALTERNATIVE("lock; addl $0,0(%%esp)", "lfence", \
+				       X86_FEATURE_XMM2) ::: "memory", "cc")
+#define wmb() asm volatile(ALTERNATIVE("lock; addl $0,0(%%esp)", "sfence", \
+				       X86_FEATURE_XMM2) ::: "memory", "cc")
 #else
 #define mb() 	asm volatile("mfence":::"memory")
 #define rmb()	asm volatile("lfence":::"memory")
@@ -31,20 +30,10 @@
 #endif
 #define dma_wmb()	barrier()
 
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	dma_rmb()
-#define smp_wmb()	barrier()
-#define smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
-#else /* !SMP */
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); barrier(); } while (0)
-#endif /* SMP */
-
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
+#define __smp_mb()	mb()
+#define __smp_rmb()	dma_rmb()
+#define __smp_wmb()	barrier()
+#define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
 
 #if defined(CONFIG_X86_PPRO_FENCE)
 
@@ -53,31 +42,31 @@
  * model and we should fall back to full barriers.
  */
 
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)					\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
+	__smp_mb();							\
 	WRITE_ONCE(*p, v);						\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
 	typeof(*p) ___p1 = READ_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
-	smp_mb();							\
+	__smp_mb();							\
 	___p1;								\
 })
 
 #else /* regular x86 TSO memory ordering */
 
-#define smp_store_release(p, v)						\
+#define __smp_store_release(p, v)					\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
 	barrier();							\
 	WRITE_ONCE(*p, v);						\
 } while (0)
 
-#define smp_load_acquire(p)						\
+#define __smp_load_acquire(p)						\
 ({									\
 	typeof(*p) ___p1 = READ_ONCE(*p);				\
 	compiletime_assert_atomic_type(*p);				\
@@ -88,7 +77,9 @@ do {									\
 #endif
 
 /* Atomic operations are already serializing on x86 */
-#define smp_mb__before_atomic()	barrier()
-#define smp_mb__after_atomic()	barrier()
+#define __smp_mb__before_atomic()	barrier()
+#define __smp_mb__after_atomic()	barrier()
+
+#include <asm-generic/barrier.h>
 
 #endif /* _ASM_X86_BARRIER_H */
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index cfe3b954d5e4..7766d1cf096e 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -91,7 +91,7 @@ set_bit(long nr, volatile unsigned long *addr)
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __set_bit(long nr, volatile unsigned long *addr)
+static __always_inline void __set_bit(long nr, volatile unsigned long *addr)
 {
 	asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory");
 }
@@ -128,13 +128,13 @@ clear_bit(long nr, volatile unsigned long *addr)
  * clear_bit() is atomic and implies release semantics before the memory
  * operation. It can be used for an unlock.
  */
-static inline void clear_bit_unlock(long nr, volatile unsigned long *addr)
+static __always_inline void clear_bit_unlock(long nr, volatile unsigned long *addr)
 {
 	barrier();
 	clear_bit(nr, addr);
 }
 
-static inline void __clear_bit(long nr, volatile unsigned long *addr)
+static __always_inline void __clear_bit(long nr, volatile unsigned long *addr)
 {
 	asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
 }
@@ -151,7 +151,7 @@ static inline void __clear_bit(long nr, volatile unsigned long *addr)
  * No memory barrier is required here, because x86 cannot reorder stores past
  * older loads. Same principle as spin_unlock.
  */
-static inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
+static __always_inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
 {
 	barrier();
 	__clear_bit(nr, addr);
@@ -166,7 +166,7 @@ static inline void __clear_bit_unlock(long nr, volatile unsigned long *addr)
  * If it's called on the same region of memory simultaneously, the effect
  * may be that only one operation succeeds.
  */
-static inline void __change_bit(long nr, volatile unsigned long *addr)
+static __always_inline void __change_bit(long nr, volatile unsigned long *addr)
 {
 	asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
 }
@@ -180,7 +180,7 @@ static inline void __change_bit(long nr, volatile unsigned long *addr)
  * Note that @nr may be almost arbitrarily large; this function is not
  * restricted to acting on a single-word quantity.
  */
-static inline void change_bit(long nr, volatile unsigned long *addr)
+static __always_inline void change_bit(long nr, volatile unsigned long *addr)
 {
 	if (IS_IMMEDIATE(nr)) {
 		asm volatile(LOCK_PREFIX "xorb %1,%0"
@@ -201,7 +201,7 @@ static inline void change_bit(long nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_set_bit(long nr, volatile unsigned long *addr)
+static __always_inline int test_and_set_bit(long nr, volatile unsigned long *addr)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, "Ir", nr, "%0", "c");
 }
@@ -228,7 +228,7 @@ test_and_set_bit_lock(long nr, volatile unsigned long *addr)
  * If two examples of this operation race, one can appear to succeed
  * but actually fail.  You must protect multiple accesses with a lock.
  */
-static inline int __test_and_set_bit(long nr, volatile unsigned long *addr)
+static __always_inline int __test_and_set_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -247,7 +247,7 @@ static inline int __test_and_set_bit(long nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
+static __always_inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, "Ir", nr, "%0", "c");
 }
@@ -268,7 +268,7 @@ static inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
  * accessed from a hypervisor on the same CPU if running in a VM: don't change
  * this without also updating arch/x86/kernel/kvm.c
  */
-static inline int __test_and_clear_bit(long nr, volatile unsigned long *addr)
+static __always_inline int __test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -280,7 +280,7 @@ static inline int __test_and_clear_bit(long nr, volatile unsigned long *addr)
 }
 
 /* WARNING: non atomic and it can be reordered! */
-static inline int __test_and_change_bit(long nr, volatile unsigned long *addr)
+static __always_inline int __test_and_change_bit(long nr, volatile unsigned long *addr)
 {
 	int oldbit;
 
@@ -300,7 +300,7 @@ static inline int __test_and_change_bit(long nr, volatile unsigned long *addr)
  * This operation is atomic and cannot be reordered.
  * It also implies a memory barrier.
  */
-static inline int test_and_change_bit(long nr, volatile unsigned long *addr)
+static __always_inline int test_and_change_bit(long nr, volatile unsigned long *addr)
 {
 	GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, "Ir", nr, "%0", "c");
 }
@@ -311,7 +311,7 @@ static __always_inline int constant_test_bit(long nr, const volatile unsigned lo
 		(addr[nr >> _BITOPS_LONG_SHIFT])) != 0;
 }
 
-static inline int variable_test_bit(long nr, volatile const unsigned long *addr)
+static __always_inline int variable_test_bit(long nr, volatile const unsigned long *addr)
 {
 	int oldbit;
 
@@ -343,7 +343,7 @@ static int test_bit(int nr, const volatile unsigned long *addr);
  *
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static inline unsigned long __ffs(unsigned long word)
+static __always_inline unsigned long __ffs(unsigned long word)
 {
 	asm("rep; bsf %1,%0"
 		: "=r" (word)
@@ -357,7 +357,7 @@ static inline unsigned long __ffs(unsigned long word)
  *
  * Undefined if no zero exists, so code should check against ~0UL first.
  */
-static inline unsigned long ffz(unsigned long word)
+static __always_inline unsigned long ffz(unsigned long word)
 {
 	asm("rep; bsf %1,%0"
 		: "=r" (word)
@@ -371,7 +371,7 @@ static inline unsigned long ffz(unsigned long word)
  *
  * Undefined if no set bit exists, so code should check against 0 first.
  */
-static inline unsigned long __fls(unsigned long word)
+static __always_inline unsigned long __fls(unsigned long word)
 {
 	asm("bsr %1,%0"
 	    : "=r" (word)
@@ -393,7 +393,7 @@ static inline unsigned long __fls(unsigned long word)
  * set bit if value is nonzero. The first (least significant) bit
  * is at position 1.
  */
-static inline int ffs(int x)
+static __always_inline int ffs(int x)
 {
 	int r;
 
@@ -434,7 +434,7 @@ static inline int ffs(int x)
  * set bit if value is nonzero. The last (most significant) bit is
  * at position 32.
  */
-static inline int fls(int x)
+static __always_inline int fls(int x)
 {
 	int r;
 
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 4fa687a47a62..6b8d6e8cd449 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -27,7 +27,7 @@
 #define BOOT_HEAP_SIZE             0x400000
 #else /* !CONFIG_KERNEL_BZIP2 */
 
-#define BOOT_HEAP_SIZE	0x8000
+#define BOOT_HEAP_SIZE	0x10000
 
 #endif /* !CONFIG_KERNEL_BZIP2 */
 
diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index e63aa38e85fb..61518cf79437 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -91,16 +91,10 @@ void clflush_cache_range(void *addr, unsigned int size);
 
 #define mmio_flush_range(addr, size) clflush_cache_range(addr, size)
 
-#ifdef CONFIG_DEBUG_RODATA
-void mark_rodata_ro(void);
 extern const int rodata_test_data;
 extern int kernel_set_to_readonly;
 void set_kernel_text_rw(void);
 void set_kernel_text_ro(void);
-#else
-static inline void set_kernel_text_rw(void) { }
-static inline void set_kernel_text_ro(void) { }
-#endif
 
 #ifdef CONFIG_DEBUG_RODATA_TEST
 int rodata_test(void);
diff --git a/arch/x86/include/asm/calgary.h b/arch/x86/include/asm/calgary.h
index 0d467b338835..a8303ebe089f 100644
--- a/arch/x86/include/asm/calgary.h
+++ b/arch/x86/include/asm/calgary.h
@@ -31,7 +31,7 @@
 #include <asm/types.h>
 
 struct iommu_table {
-	struct cal_chipset_ops *chip_ops; /* chipset specific funcs */
+	const struct cal_chipset_ops *chip_ops; /* chipset specific funcs */
 	unsigned long  it_base;      /* mapped address of tce table */
 	unsigned long  it_hint;      /* Hint for next alloc */
 	unsigned long *it_map;       /* A simple allocation bitmap for now */
diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h
index f50de6951738..532f85e6651f 100644
--- a/arch/x86/include/asm/checksum_32.h
+++ b/arch/x86/include/asm/checksum_32.h
@@ -112,8 +112,7 @@ static inline __sum16 csum_fold(__wsum sum)
 }
 
 static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	asm("addl %1, %0	;\n"
@@ -131,8 +130,7 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto,
+					__u32 len, __u8 proto,
 					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
@@ -151,8 +149,7 @@ static inline __sum16 ip_compute_csum(const void *buff, int len)
 #define _HAVE_ARCH_IPV6_CSUM
 static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 				      const struct in6_addr *daddr,
-				      __u32 len, unsigned short proto,
-				      __wsum sum)
+				      __u32 len, __u8 proto, __wsum sum)
 {
 	asm("addl 0(%1), %0	;\n"
 	    "adcl 4(%1), %0	;\n"
diff --git a/arch/x86/include/asm/checksum_64.h b/arch/x86/include/asm/checksum_64.h
index cd00e1774491..c020ee75dce7 100644
--- a/arch/x86/include/asm/checksum_64.h
+++ b/arch/x86/include/asm/checksum_64.h
@@ -84,8 +84,8 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
  * 32bit unfolded.
  */
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		   __u8 proto, __wsum sum)
 {
 	asm("  addl %1, %0\n"
 	    "  adcl %2, %0\n"
@@ -110,8 +110,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
  * complemented and ready to be filled in.
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					unsigned short len,
-					unsigned short proto, __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
 }
@@ -177,7 +177,7 @@ struct in6_addr;
 #define _HAVE_ARCH_IPV6_CSUM 1
 extern __sum16
 csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
-		__u32 len, unsigned short proto, __wsum sum);
+		__u32 len, __u8 proto, __wsum sum);
 
 static inline unsigned add32_with_carry(unsigned a, unsigned b)
 {
diff --git a/arch/x86/include/asm/clocksource.h b/arch/x86/include/asm/clocksource.h
index eda81dc0f4ae..d194266acb28 100644
--- a/arch/x86/include/asm/clocksource.h
+++ b/arch/x86/include/asm/clocksource.h
@@ -3,10 +3,11 @@
 #ifndef _ASM_X86_CLOCKSOURCE_H
 #define _ASM_X86_CLOCKSOURCE_H
 
-#define VCLOCK_NONE 0  /* No vDSO clock available.	*/
-#define VCLOCK_TSC  1  /* vDSO should use vread_tsc.	*/
-#define VCLOCK_HPET 2  /* vDSO should use vread_hpet.	*/
-#define VCLOCK_PVCLOCK 3 /* vDSO should use vread_pvclock. */
+#define VCLOCK_NONE	0  /* No vDSO clock available.	*/
+#define VCLOCK_TSC	1  /* vDSO should use vread_tsc.	*/
+#define VCLOCK_HPET	2  /* vDSO should use vread_hpet.	*/
+#define VCLOCK_PVCLOCK	3 /* vDSO should use vread_pvclock. */
+#define VCLOCK_MAX	3
 
 struct arch_clocksource_data {
 	int vclock_mode;
diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h
index ad19841eddfe..9733361fed6f 100644
--- a/arch/x86/include/asm/cmpxchg.h
+++ b/arch/x86/include/asm/cmpxchg.h
@@ -2,6 +2,7 @@
 #define ASM_X86_CMPXCHG_H
 
 #include <linux/compiler.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative.h> /* Provides LOCK_PREFIX */
 
 /*
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index f7e142926481..e4959d023af8 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -109,6 +109,6 @@ static inline u64 __cmpxchg64_local(volatile u64 *ptr, u64 old, u64 new)
 
 #endif
 
-#define system_has_cmpxchg_double() cpu_has_cx8
+#define system_has_cmpxchg_double() boot_cpu_has(X86_FEATURE_CX8)
 
 #endif /* _ASM_X86_CMPXCHG_32_H */
diff --git a/arch/x86/include/asm/cmpxchg_64.h b/arch/x86/include/asm/cmpxchg_64.h
index 1af94697aae5..caa23a34c963 100644
--- a/arch/x86/include/asm/cmpxchg_64.h
+++ b/arch/x86/include/asm/cmpxchg_64.h
@@ -18,6 +18,6 @@ static inline void set_64bit(volatile u64 *ptr, u64 val)
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#define system_has_cmpxchg_double() cpu_has_cx16
+#define system_has_cmpxchg_double() boot_cpu_has(X86_FEATURE_CX16)
 
 #endif /* _ASM_X86_CMPXCHG_64_H */
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index acdee09228b3..ebb102e1bbc7 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -316,9 +316,10 @@ static inline bool is_x32_task(void)
 	return false;
 }
 
-static inline bool is_compat_task(void)
+static inline bool in_compat_syscall(void)
 {
 	return is_ia32_task() || is_x32_task();
 }
+#define in_compat_syscall in_compat_syscall	/* override the generic impl */
 
 #endif /* _ASM_X86_COMPAT_H */
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index bf2caa1dedc5..678637ad7476 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -36,4 +36,7 @@ extern int _debug_hotplug_cpu(int cpu, int action);
 
 int mwait_usable(const struct cpuinfo_x86 *);
 
+unsigned int x86_family(unsigned int sig);
+unsigned int x86_model(unsigned int sig);
+unsigned int x86_stepping(unsigned int sig);
 #endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index e4f8010f22e0..3636ec06c887 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -1,283 +1,34 @@
-/*
- * Defines x86 CPU feature bits
- */
 #ifndef _ASM_X86_CPUFEATURE_H
 #define _ASM_X86_CPUFEATURE_H
 
-#ifndef _ASM_X86_REQUIRED_FEATURES_H
-#include <asm/required-features.h>
-#endif
-
-#ifndef _ASM_X86_DISABLED_FEATURES_H
-#include <asm/disabled-features.h>
-#endif
-
-#define NCAPINTS	14	/* N 32-bit words worth of info */
-#define NBUGINTS	1	/* N 32-bit bug flags */
-
-/*
- * Note: If the comment begins with a quoted string, that string is used
- * in /proc/cpuinfo instead of the macro name.  If the string is "",
- * this feature bit is not displayed in /proc/cpuinfo at all.
- */
-
-/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
-#define X86_FEATURE_FPU		( 0*32+ 0) /* Onboard FPU */
-#define X86_FEATURE_VME		( 0*32+ 1) /* Virtual Mode Extensions */
-#define X86_FEATURE_DE		( 0*32+ 2) /* Debugging Extensions */
-#define X86_FEATURE_PSE		( 0*32+ 3) /* Page Size Extensions */
-#define X86_FEATURE_TSC		( 0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR		( 0*32+ 5) /* Model-Specific Registers */
-#define X86_FEATURE_PAE		( 0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE		( 0*32+ 7) /* Machine Check Exception */
-#define X86_FEATURE_CX8		( 0*32+ 8) /* CMPXCHG8 instruction */
-#define X86_FEATURE_APIC	( 0*32+ 9) /* Onboard APIC */
-#define X86_FEATURE_SEP		( 0*32+11) /* SYSENTER/SYSEXIT */
-#define X86_FEATURE_MTRR	( 0*32+12) /* Memory Type Range Registers */
-#define X86_FEATURE_PGE		( 0*32+13) /* Page Global Enable */
-#define X86_FEATURE_MCA		( 0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV	( 0*32+15) /* CMOV instructions */
-					  /* (plus FCMOVcc, FCOMI with FPU) */
-#define X86_FEATURE_PAT		( 0*32+16) /* Page Attribute Table */
-#define X86_FEATURE_PSE36	( 0*32+17) /* 36-bit PSEs */
-#define X86_FEATURE_PN		( 0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLUSH	( 0*32+19) /* CLFLUSH instruction */
-#define X86_FEATURE_DS		( 0*32+21) /* "dts" Debug Store */
-#define X86_FEATURE_ACPI	( 0*32+22) /* ACPI via MSR */
-#define X86_FEATURE_MMX		( 0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR	( 0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
-#define X86_FEATURE_XMM		( 0*32+25) /* "sse" */
-#define X86_FEATURE_XMM2	( 0*32+26) /* "sse2" */
-#define X86_FEATURE_SELFSNOOP	( 0*32+27) /* "ss" CPU self snoop */
-#define X86_FEATURE_HT		( 0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC		( 0*32+29) /* "tm" Automatic clock control */
-#define X86_FEATURE_IA64	( 0*32+30) /* IA-64 processor */
-#define X86_FEATURE_PBE		( 0*32+31) /* Pending Break Enable */
-
-/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
-/* Don't duplicate feature flags which are redundant with Intel! */
-#define X86_FEATURE_SYSCALL	( 1*32+11) /* SYSCALL/SYSRET */
-#define X86_FEATURE_MP		( 1*32+19) /* MP Capable. */
-#define X86_FEATURE_NX		( 1*32+20) /* Execute Disable */
-#define X86_FEATURE_MMXEXT	( 1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_FXSR_OPT	( 1*32+25) /* FXSAVE/FXRSTOR optimizations */
-#define X86_FEATURE_GBPAGES	( 1*32+26) /* "pdpe1gb" GB pages */
-#define X86_FEATURE_RDTSCP	( 1*32+27) /* RDTSCP */
-#define X86_FEATURE_LM		( 1*32+29) /* Long Mode (x86-64) */
-#define X86_FEATURE_3DNOWEXT	( 1*32+30) /* AMD 3DNow! extensions */
-#define X86_FEATURE_3DNOW	( 1*32+31) /* 3DNow! */
-
-/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
-#define X86_FEATURE_RECOVERY	( 2*32+ 0) /* CPU in recovery mode */
-#define X86_FEATURE_LONGRUN	( 2*32+ 1) /* Longrun power control */
-#define X86_FEATURE_LRTI	( 2*32+ 3) /* LongRun table interface */
-
-/* Other features, Linux-defined mapping, word 3 */
-/* This range is used for feature bits which conflict or are synthesized */
-#define X86_FEATURE_CXMMX	( 3*32+ 0) /* Cyrix MMX extensions */
-#define X86_FEATURE_K6_MTRR	( 3*32+ 1) /* AMD K6 nonstandard MTRRs */
-#define X86_FEATURE_CYRIX_ARR	( 3*32+ 2) /* Cyrix ARRs (= MTRRs) */
-#define X86_FEATURE_CENTAUR_MCR	( 3*32+ 3) /* Centaur MCRs (= MTRRs) */
-/* cpu types for specific tunings: */
-#define X86_FEATURE_K8		( 3*32+ 4) /* "" Opteron, Athlon64 */
-#define X86_FEATURE_K7		( 3*32+ 5) /* "" Athlon */
-#define X86_FEATURE_P3		( 3*32+ 6) /* "" P3 */
-#define X86_FEATURE_P4		( 3*32+ 7) /* "" P4 */
-#define X86_FEATURE_CONSTANT_TSC ( 3*32+ 8) /* TSC ticks at a constant rate */
-#define X86_FEATURE_UP		( 3*32+ 9) /* smp kernel running on up */
-/* free, was #define X86_FEATURE_FXSAVE_LEAK ( 3*32+10) * "" FXSAVE leaks FOP/FIP/FOP */
-#define X86_FEATURE_ARCH_PERFMON ( 3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS	( 3*32+12) /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS		( 3*32+13) /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32	( 3*32+14) /* "" syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32	( 3*32+15) /* "" sysenter in ia32 userspace */
-#define X86_FEATURE_REP_GOOD	( 3*32+16) /* rep microcode works well */
-#define X86_FEATURE_MFENCE_RDTSC ( 3*32+17) /* "" Mfence synchronizes RDTSC */
-#define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) /* "" Lfence synchronizes RDTSC */
-/* free, was #define X86_FEATURE_11AP	( 3*32+19) * "" Bad local APIC aka 11AP */
-#define X86_FEATURE_NOPL	( 3*32+20) /* The NOPL (0F 1F) instructions */
-#define X86_FEATURE_ALWAYS	( 3*32+21) /* "" Always-present feature */
-#define X86_FEATURE_XTOPOLOGY	( 3*32+22) /* cpu topology enum extensions */
-#define X86_FEATURE_TSC_RELIABLE ( 3*32+23) /* TSC is known to be reliable */
-#define X86_FEATURE_NONSTOP_TSC	( 3*32+24) /* TSC does not stop in C states */
-/* free, was #define X86_FEATURE_CLFLUSH_MONITOR ( 3*32+25) * "" clflush reqd with monitor */
-#define X86_FEATURE_EXTD_APICID	( 3*32+26) /* has extended APICID (8 bits) */
-#define X86_FEATURE_AMD_DCM     ( 3*32+27) /* multi-node processor */
-#define X86_FEATURE_APERFMPERF	( 3*32+28) /* APERFMPERF */
-#define X86_FEATURE_EAGER_FPU	( 3*32+29) /* "eagerfpu" Non lazy FPU restore */
-#define X86_FEATURE_NONSTOP_TSC_S3 ( 3*32+30) /* TSC doesn't stop in S3 state */
-
-/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
-#define X86_FEATURE_XMM3	( 4*32+ 0) /* "pni" SSE-3 */
-#define X86_FEATURE_PCLMULQDQ	( 4*32+ 1) /* PCLMULQDQ instruction */
-#define X86_FEATURE_DTES64	( 4*32+ 2) /* 64-bit Debug Store */
-#define X86_FEATURE_MWAIT	( 4*32+ 3) /* "monitor" Monitor/Mwait support */
-#define X86_FEATURE_DSCPL	( 4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
-#define X86_FEATURE_VMX		( 4*32+ 5) /* Hardware virtualization */
-#define X86_FEATURE_SMX		( 4*32+ 6) /* Safer mode */
-#define X86_FEATURE_EST		( 4*32+ 7) /* Enhanced SpeedStep */
-#define X86_FEATURE_TM2		( 4*32+ 8) /* Thermal Monitor 2 */
-#define X86_FEATURE_SSSE3	( 4*32+ 9) /* Supplemental SSE-3 */
-#define X86_FEATURE_CID		( 4*32+10) /* Context ID */
-#define X86_FEATURE_SDBG	( 4*32+11) /* Silicon Debug */
-#define X86_FEATURE_FMA		( 4*32+12) /* Fused multiply-add */
-#define X86_FEATURE_CX16	( 4*32+13) /* CMPXCHG16B */
-#define X86_FEATURE_XTPR	( 4*32+14) /* Send Task Priority Messages */
-#define X86_FEATURE_PDCM	( 4*32+15) /* Performance Capabilities */
-#define X86_FEATURE_PCID	( 4*32+17) /* Process Context Identifiers */
-#define X86_FEATURE_DCA		( 4*32+18) /* Direct Cache Access */
-#define X86_FEATURE_XMM4_1	( 4*32+19) /* "sse4_1" SSE-4.1 */
-#define X86_FEATURE_XMM4_2	( 4*32+20) /* "sse4_2" SSE-4.2 */
-#define X86_FEATURE_X2APIC	( 4*32+21) /* x2APIC */
-#define X86_FEATURE_MOVBE	( 4*32+22) /* MOVBE instruction */
-#define X86_FEATURE_POPCNT      ( 4*32+23) /* POPCNT instruction */
-#define X86_FEATURE_TSC_DEADLINE_TIMER	( 4*32+24) /* Tsc deadline timer */
-#define X86_FEATURE_AES		( 4*32+25) /* AES instructions */
-#define X86_FEATURE_XSAVE	( 4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
-#define X86_FEATURE_OSXSAVE	( 4*32+27) /* "" XSAVE enabled in the OS */
-#define X86_FEATURE_AVX		( 4*32+28) /* Advanced Vector Extensions */
-#define X86_FEATURE_F16C	( 4*32+29) /* 16-bit fp conversions */
-#define X86_FEATURE_RDRAND	( 4*32+30) /* The RDRAND instruction */
-#define X86_FEATURE_HYPERVISOR	( 4*32+31) /* Running on a hypervisor */
-
-/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
-#define X86_FEATURE_XSTORE	( 5*32+ 2) /* "rng" RNG present (xstore) */
-#define X86_FEATURE_XSTORE_EN	( 5*32+ 3) /* "rng_en" RNG enabled */
-#define X86_FEATURE_XCRYPT	( 5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
-#define X86_FEATURE_XCRYPT_EN	( 5*32+ 7) /* "ace_en" on-CPU crypto enabled */
-#define X86_FEATURE_ACE2	( 5*32+ 8) /* Advanced Cryptography Engine v2 */
-#define X86_FEATURE_ACE2_EN	( 5*32+ 9) /* ACE v2 enabled */
-#define X86_FEATURE_PHE		( 5*32+10) /* PadLock Hash Engine */
-#define X86_FEATURE_PHE_EN	( 5*32+11) /* PHE enabled */
-#define X86_FEATURE_PMM		( 5*32+12) /* PadLock Montgomery Multiplier */
-#define X86_FEATURE_PMM_EN	( 5*32+13) /* PMM enabled */
-
-/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
-#define X86_FEATURE_LAHF_LM	( 6*32+ 0) /* LAHF/SAHF in long mode */
-#define X86_FEATURE_CMP_LEGACY	( 6*32+ 1) /* If yes HyperThreading not valid */
-#define X86_FEATURE_SVM		( 6*32+ 2) /* Secure virtual machine */
-#define X86_FEATURE_EXTAPIC	( 6*32+ 3) /* Extended APIC space */
-#define X86_FEATURE_CR8_LEGACY	( 6*32+ 4) /* CR8 in 32-bit mode */
-#define X86_FEATURE_ABM		( 6*32+ 5) /* Advanced bit manipulation */
-#define X86_FEATURE_SSE4A	( 6*32+ 6) /* SSE-4A */
-#define X86_FEATURE_MISALIGNSSE ( 6*32+ 7) /* Misaligned SSE mode */
-#define X86_FEATURE_3DNOWPREFETCH ( 6*32+ 8) /* 3DNow prefetch instructions */
-#define X86_FEATURE_OSVW	( 6*32+ 9) /* OS Visible Workaround */
-#define X86_FEATURE_IBS		( 6*32+10) /* Instruction Based Sampling */
-#define X86_FEATURE_XOP		( 6*32+11) /* extended AVX instructions */
-#define X86_FEATURE_SKINIT	( 6*32+12) /* SKINIT/STGI instructions */
-#define X86_FEATURE_WDT		( 6*32+13) /* Watchdog timer */
-#define X86_FEATURE_LWP		( 6*32+15) /* Light Weight Profiling */
-#define X86_FEATURE_FMA4	( 6*32+16) /* 4 operands MAC instructions */
-#define X86_FEATURE_TCE		( 6*32+17) /* translation cache extension */
-#define X86_FEATURE_NODEID_MSR	( 6*32+19) /* NodeId MSR */
-#define X86_FEATURE_TBM		( 6*32+21) /* trailing bit manipulations */
-#define X86_FEATURE_TOPOEXT	( 6*32+22) /* topology extensions CPUID leafs */
-#define X86_FEATURE_PERFCTR_CORE ( 6*32+23) /* core performance counter extensions */
-#define X86_FEATURE_PERFCTR_NB  ( 6*32+24) /* NB performance counter extensions */
-#define X86_FEATURE_BPEXT	(6*32+26) /* data breakpoint extension */
-#define X86_FEATURE_PERFCTR_L2	( 6*32+28) /* L2 performance counter extensions */
-#define X86_FEATURE_MWAITX	( 6*32+29) /* MWAIT extension (MONITORX/MWAITX) */
-
-/*
- * Auxiliary flags: Linux defined - For features scattered in various
- * CPUID levels like 0x6, 0xA etc, word 7
- */
-#define X86_FEATURE_IDA		( 7*32+ 0) /* Intel Dynamic Acceleration */
-#define X86_FEATURE_ARAT	( 7*32+ 1) /* Always Running APIC Timer */
-#define X86_FEATURE_CPB		( 7*32+ 2) /* AMD Core Performance Boost */
-#define X86_FEATURE_EPB		( 7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
-#define X86_FEATURE_PLN		( 7*32+ 5) /* Intel Power Limit Notification */
-#define X86_FEATURE_PTS		( 7*32+ 6) /* Intel Package Thermal Status */
-#define X86_FEATURE_DTHERM	( 7*32+ 7) /* Digital Thermal Sensor */
-#define X86_FEATURE_HW_PSTATE	( 7*32+ 8) /* AMD HW-PState */
-#define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
-#define X86_FEATURE_HWP		( 7*32+ 10) /* "hwp" Intel HWP */
-#define X86_FEATURE_HWP_NOTIFY	( 7*32+ 11) /* Intel HWP_NOTIFY */
-#define X86_FEATURE_HWP_ACT_WINDOW ( 7*32+ 12) /* Intel HWP_ACT_WINDOW */
-#define X86_FEATURE_HWP_EPP	( 7*32+13) /* Intel HWP_EPP */
-#define X86_FEATURE_HWP_PKG_REQ ( 7*32+14) /* Intel HWP_PKG_REQ */
-#define X86_FEATURE_INTEL_PT	( 7*32+15) /* Intel Processor Trace */
-
-/* Virtualization flags: Linux defined, word 8 */
-#define X86_FEATURE_TPR_SHADOW  ( 8*32+ 0) /* Intel TPR Shadow */
-#define X86_FEATURE_VNMI        ( 8*32+ 1) /* Intel Virtual NMI */
-#define X86_FEATURE_FLEXPRIORITY ( 8*32+ 2) /* Intel FlexPriority */
-#define X86_FEATURE_EPT         ( 8*32+ 3) /* Intel Extended Page Table */
-#define X86_FEATURE_VPID        ( 8*32+ 4) /* Intel Virtual Processor ID */
-#define X86_FEATURE_NPT		( 8*32+ 5) /* AMD Nested Page Table support */
-#define X86_FEATURE_LBRV	( 8*32+ 6) /* AMD LBR Virtualization support */
-#define X86_FEATURE_SVML	( 8*32+ 7) /* "svm_lock" AMD SVM locking MSR */
-#define X86_FEATURE_NRIPS	( 8*32+ 8) /* "nrip_save" AMD SVM next_rip save */
-#define X86_FEATURE_TSCRATEMSR  ( 8*32+ 9) /* "tsc_scale" AMD TSC scaling support */
-#define X86_FEATURE_VMCBCLEAN   ( 8*32+10) /* "vmcb_clean" AMD VMCB clean bits support */
-#define X86_FEATURE_FLUSHBYASID ( 8*32+11) /* AMD flush-by-ASID support */
-#define X86_FEATURE_DECODEASSISTS ( 8*32+12) /* AMD Decode Assists support */
-#define X86_FEATURE_PAUSEFILTER ( 8*32+13) /* AMD filtered pause intercept */
-#define X86_FEATURE_PFTHRESHOLD ( 8*32+14) /* AMD pause filter threshold */
-#define X86_FEATURE_VMMCALL     ( 8*32+15) /* Prefer vmmcall to vmcall */
-
-
-/* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
-#define X86_FEATURE_FSGSBASE	( 9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
-#define X86_FEATURE_TSC_ADJUST	( 9*32+ 1) /* TSC adjustment MSR 0x3b */
-#define X86_FEATURE_BMI1	( 9*32+ 3) /* 1st group bit manipulation extensions */
-#define X86_FEATURE_HLE		( 9*32+ 4) /* Hardware Lock Elision */
-#define X86_FEATURE_AVX2	( 9*32+ 5) /* AVX2 instructions */
-#define X86_FEATURE_SMEP	( 9*32+ 7) /* Supervisor Mode Execution Protection */
-#define X86_FEATURE_BMI2	( 9*32+ 8) /* 2nd group bit manipulation extensions */
-#define X86_FEATURE_ERMS	( 9*32+ 9) /* Enhanced REP MOVSB/STOSB */
-#define X86_FEATURE_INVPCID	( 9*32+10) /* Invalidate Processor Context ID */
-#define X86_FEATURE_RTM		( 9*32+11) /* Restricted Transactional Memory */
-#define X86_FEATURE_CQM		( 9*32+12) /* Cache QoS Monitoring */
-#define X86_FEATURE_MPX		( 9*32+14) /* Memory Protection Extension */
-#define X86_FEATURE_AVX512F	( 9*32+16) /* AVX-512 Foundation */
-#define X86_FEATURE_RDSEED	( 9*32+18) /* The RDSEED instruction */
-#define X86_FEATURE_ADX		( 9*32+19) /* The ADCX and ADOX instructions */
-#define X86_FEATURE_SMAP	( 9*32+20) /* Supervisor Mode Access Prevention */
-#define X86_FEATURE_PCOMMIT	( 9*32+22) /* PCOMMIT instruction */
-#define X86_FEATURE_CLFLUSHOPT	( 9*32+23) /* CLFLUSHOPT instruction */
-#define X86_FEATURE_CLWB	( 9*32+24) /* CLWB instruction */
-#define X86_FEATURE_AVX512PF	( 9*32+26) /* AVX-512 Prefetch */
-#define X86_FEATURE_AVX512ER	( 9*32+27) /* AVX-512 Exponential and Reciprocal */
-#define X86_FEATURE_AVX512CD	( 9*32+28) /* AVX-512 Conflict Detection */
-#define X86_FEATURE_SHA_NI	( 9*32+29) /* SHA1/SHA256 Instruction Extensions */
-
-/* Extended state features, CPUID level 0x0000000d:1 (eax), word 10 */
-#define X86_FEATURE_XSAVEOPT	(10*32+ 0) /* XSAVEOPT */
-#define X86_FEATURE_XSAVEC	(10*32+ 1) /* XSAVEC */
-#define X86_FEATURE_XGETBV1	(10*32+ 2) /* XGETBV with ECX = 1 */
-#define X86_FEATURE_XSAVES	(10*32+ 3) /* XSAVES/XRSTORS */
-
-/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:0 (edx), word 11 */
-#define X86_FEATURE_CQM_LLC	(11*32+ 1) /* LLC QoS if 1 */
-
-/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:1 (edx), word 12 */
-#define X86_FEATURE_CQM_OCCUP_LLC (12*32+ 0) /* LLC occupancy monitoring if 1 */
-
-/* AMD-defined CPU features, CPUID level 0x80000008 (ebx), word 13 */
-#define X86_FEATURE_CLZERO	(13*32+0) /* CLZERO instruction */
-
-/*
- * BUG word(s)
- */
-#define X86_BUG(x)		(NCAPINTS*32 + (x))
-
-#define X86_BUG_F00F		X86_BUG(0) /* Intel F00F */
-#define X86_BUG_FDIV		X86_BUG(1) /* FPU FDIV */
-#define X86_BUG_COMA		X86_BUG(2) /* Cyrix 6x86 coma */
-#define X86_BUG_AMD_TLB_MMATCH	X86_BUG(3) /* "tlb_mmatch" AMD Erratum 383 */
-#define X86_BUG_AMD_APIC_C1E	X86_BUG(4) /* "apic_c1e" AMD Erratum 400 */
-#define X86_BUG_11AP		X86_BUG(5) /* Bad local APIC aka 11AP */
-#define X86_BUG_FXSAVE_LEAK	X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */
-#define X86_BUG_CLFLUSH_MONITOR	X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */
-#define X86_BUG_SYSRET_SS_ATTRS	X86_BUG(8) /* SYSRET doesn't fix up SS attrs */
+#include <asm/processor.h>
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 
 #include <asm/asm.h>
 #include <linux/bitops.h>
 
+enum cpuid_leafs
+{
+	CPUID_1_EDX		= 0,
+	CPUID_8000_0001_EDX,
+	CPUID_8086_0001_EDX,
+	CPUID_LNX_1,
+	CPUID_1_ECX,
+	CPUID_C000_0001_EDX,
+	CPUID_8000_0001_ECX,
+	CPUID_LNX_2,
+	CPUID_LNX_3,
+	CPUID_7_0_EBX,
+	CPUID_D_1_EAX,
+	CPUID_F_0_EDX,
+	CPUID_F_1_EDX,
+	CPUID_8000_0008_EBX,
+	CPUID_6_EAX,
+	CPUID_8000_000A_EDX,
+	CPUID_7_ECX,
+};
+
 #ifdef CONFIG_X86_FEATURE_NAMES
 extern const char * const x86_cap_flags[NCAPINTS*32];
 extern const char * const x86_power_flags[32];
@@ -298,28 +49,42 @@ extern const char * const x86_bug_flags[NBUGINTS*32];
 	 test_bit(bit, (unsigned long *)((c)->x86_capability))
 
 #define REQUIRED_MASK_BIT_SET(bit)					\
-	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) ||	\
-	   (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) ||	\
-	   (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) ||	\
-	   (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) ||	\
-	   (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) ||	\
-	   (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) ||	\
-	   (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ||	\
-	   (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) ||	\
-	   (((bit)>>5)==8 && (1UL<<((bit)&31) & REQUIRED_MASK8)) ||	\
-	   (((bit)>>5)==9 && (1UL<<((bit)&31) & REQUIRED_MASK9)) )
+	 ( (((bit)>>5)==0  && (1UL<<((bit)&31) & REQUIRED_MASK0 )) ||	\
+	   (((bit)>>5)==1  && (1UL<<((bit)&31) & REQUIRED_MASK1 )) ||	\
+	   (((bit)>>5)==2  && (1UL<<((bit)&31) & REQUIRED_MASK2 )) ||	\
+	   (((bit)>>5)==3  && (1UL<<((bit)&31) & REQUIRED_MASK3 )) ||	\
+	   (((bit)>>5)==4  && (1UL<<((bit)&31) & REQUIRED_MASK4 )) ||	\
+	   (((bit)>>5)==5  && (1UL<<((bit)&31) & REQUIRED_MASK5 )) ||	\
+	   (((bit)>>5)==6  && (1UL<<((bit)&31) & REQUIRED_MASK6 )) ||	\
+	   (((bit)>>5)==7  && (1UL<<((bit)&31) & REQUIRED_MASK7 )) ||	\
+	   (((bit)>>5)==8  && (1UL<<((bit)&31) & REQUIRED_MASK8 )) ||	\
+	   (((bit)>>5)==9  && (1UL<<((bit)&31) & REQUIRED_MASK9 )) ||	\
+	   (((bit)>>5)==10 && (1UL<<((bit)&31) & REQUIRED_MASK10)) ||	\
+	   (((bit)>>5)==11 && (1UL<<((bit)&31) & REQUIRED_MASK11)) ||	\
+	   (((bit)>>5)==12 && (1UL<<((bit)&31) & REQUIRED_MASK12)) ||	\
+	   (((bit)>>5)==13 && (1UL<<((bit)&31) & REQUIRED_MASK13)) ||	\
+	   (((bit)>>5)==13 && (1UL<<((bit)&31) & REQUIRED_MASK14)) ||	\
+	   (((bit)>>5)==13 && (1UL<<((bit)&31) & REQUIRED_MASK15)) ||	\
+	   (((bit)>>5)==14 && (1UL<<((bit)&31) & REQUIRED_MASK16)) )
 
 #define DISABLED_MASK_BIT_SET(bit)					\
-	 ( (((bit)>>5)==0 && (1UL<<((bit)&31) & DISABLED_MASK0)) ||	\
-	   (((bit)>>5)==1 && (1UL<<((bit)&31) & DISABLED_MASK1)) ||	\
-	   (((bit)>>5)==2 && (1UL<<((bit)&31) & DISABLED_MASK2)) ||	\
-	   (((bit)>>5)==3 && (1UL<<((bit)&31) & DISABLED_MASK3)) ||	\
-	   (((bit)>>5)==4 && (1UL<<((bit)&31) & DISABLED_MASK4)) ||	\
-	   (((bit)>>5)==5 && (1UL<<((bit)&31) & DISABLED_MASK5)) ||	\
-	   (((bit)>>5)==6 && (1UL<<((bit)&31) & DISABLED_MASK6)) ||	\
-	   (((bit)>>5)==7 && (1UL<<((bit)&31) & DISABLED_MASK7)) ||	\
-	   (((bit)>>5)==8 && (1UL<<((bit)&31) & DISABLED_MASK8)) ||	\
-	   (((bit)>>5)==9 && (1UL<<((bit)&31) & DISABLED_MASK9)) )
+	 ( (((bit)>>5)==0  && (1UL<<((bit)&31) & DISABLED_MASK0 )) ||	\
+	   (((bit)>>5)==1  && (1UL<<((bit)&31) & DISABLED_MASK1 )) ||	\
+	   (((bit)>>5)==2  && (1UL<<((bit)&31) & DISABLED_MASK2 )) ||	\
+	   (((bit)>>5)==3  && (1UL<<((bit)&31) & DISABLED_MASK3 )) ||	\
+	   (((bit)>>5)==4  && (1UL<<((bit)&31) & DISABLED_MASK4 )) ||	\
+	   (((bit)>>5)==5  && (1UL<<((bit)&31) & DISABLED_MASK5 )) ||	\
+	   (((bit)>>5)==6  && (1UL<<((bit)&31) & DISABLED_MASK6 )) ||	\
+	   (((bit)>>5)==7  && (1UL<<((bit)&31) & DISABLED_MASK7 )) ||	\
+	   (((bit)>>5)==8  && (1UL<<((bit)&31) & DISABLED_MASK8 )) ||	\
+	   (((bit)>>5)==9  && (1UL<<((bit)&31) & DISABLED_MASK9 )) ||	\
+	   (((bit)>>5)==10 && (1UL<<((bit)&31) & DISABLED_MASK10)) ||	\
+	   (((bit)>>5)==11 && (1UL<<((bit)&31) & DISABLED_MASK11)) ||	\
+	   (((bit)>>5)==12 && (1UL<<((bit)&31) & DISABLED_MASK12)) ||	\
+	   (((bit)>>5)==13 && (1UL<<((bit)&31) & DISABLED_MASK13)) ||	\
+	   (((bit)>>5)==13 && (1UL<<((bit)&31) & DISABLED_MASK14)) ||	\
+	   (((bit)>>5)==13 && (1UL<<((bit)&31) & DISABLED_MASK15)) ||	\
+	   (((bit)>>5)==14 && (1UL<<((bit)&31) & DISABLED_MASK16)) )
 
 #define cpu_has(c, bit)							\
 	(__builtin_constant_p(bit) && REQUIRED_MASK_BIT_SET(bit) ? 1 :	\
@@ -338,8 +103,7 @@ extern const char * const x86_bug_flags[NBUGINTS*32];
  * is not relevant.
  */
 #define cpu_feature_enabled(bit)	\
-	(__builtin_constant_p(bit) && DISABLED_MASK_BIT_SET(bit) ? 0 :	\
-	 cpu_has(&boot_cpu_data, bit))
+	(__builtin_constant_p(bit) && DISABLED_MASK_BIT_SET(bit) ? 0 : static_cpu_has(bit))
 
 #define boot_cpu_has(bit)	cpu_has(&boot_cpu_data, bit)
 
@@ -355,155 +119,39 @@ extern const char * const x86_bug_flags[NBUGINTS*32];
 } while (0)
 
 #define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)
-#define cpu_has_de		boot_cpu_has(X86_FEATURE_DE)
 #define cpu_has_pse		boot_cpu_has(X86_FEATURE_PSE)
 #define cpu_has_tsc		boot_cpu_has(X86_FEATURE_TSC)
 #define cpu_has_pge		boot_cpu_has(X86_FEATURE_PGE)
 #define cpu_has_apic		boot_cpu_has(X86_FEATURE_APIC)
-#define cpu_has_sep		boot_cpu_has(X86_FEATURE_SEP)
-#define cpu_has_mtrr		boot_cpu_has(X86_FEATURE_MTRR)
-#define cpu_has_mmx		boot_cpu_has(X86_FEATURE_MMX)
 #define cpu_has_fxsr		boot_cpu_has(X86_FEATURE_FXSR)
 #define cpu_has_xmm		boot_cpu_has(X86_FEATURE_XMM)
 #define cpu_has_xmm2		boot_cpu_has(X86_FEATURE_XMM2)
-#define cpu_has_xmm3		boot_cpu_has(X86_FEATURE_XMM3)
-#define cpu_has_ssse3		boot_cpu_has(X86_FEATURE_SSSE3)
 #define cpu_has_aes		boot_cpu_has(X86_FEATURE_AES)
 #define cpu_has_avx		boot_cpu_has(X86_FEATURE_AVX)
 #define cpu_has_avx2		boot_cpu_has(X86_FEATURE_AVX2)
-#define cpu_has_ht		boot_cpu_has(X86_FEATURE_HT)
-#define cpu_has_nx		boot_cpu_has(X86_FEATURE_NX)
-#define cpu_has_xstore		boot_cpu_has(X86_FEATURE_XSTORE)
-#define cpu_has_xstore_enabled	boot_cpu_has(X86_FEATURE_XSTORE_EN)
-#define cpu_has_xcrypt		boot_cpu_has(X86_FEATURE_XCRYPT)
-#define cpu_has_xcrypt_enabled	boot_cpu_has(X86_FEATURE_XCRYPT_EN)
-#define cpu_has_ace2		boot_cpu_has(X86_FEATURE_ACE2)
-#define cpu_has_ace2_enabled	boot_cpu_has(X86_FEATURE_ACE2_EN)
-#define cpu_has_phe		boot_cpu_has(X86_FEATURE_PHE)
-#define cpu_has_phe_enabled	boot_cpu_has(X86_FEATURE_PHE_EN)
-#define cpu_has_pmm		boot_cpu_has(X86_FEATURE_PMM)
-#define cpu_has_pmm_enabled	boot_cpu_has(X86_FEATURE_PMM_EN)
-#define cpu_has_ds		boot_cpu_has(X86_FEATURE_DS)
-#define cpu_has_pebs		boot_cpu_has(X86_FEATURE_PEBS)
 #define cpu_has_clflush		boot_cpu_has(X86_FEATURE_CLFLUSH)
-#define cpu_has_bts		boot_cpu_has(X86_FEATURE_BTS)
 #define cpu_has_gbpages		boot_cpu_has(X86_FEATURE_GBPAGES)
 #define cpu_has_arch_perfmon	boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
 #define cpu_has_pat		boot_cpu_has(X86_FEATURE_PAT)
-#define cpu_has_xmm4_1		boot_cpu_has(X86_FEATURE_XMM4_1)
-#define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
 #define cpu_has_x2apic		boot_cpu_has(X86_FEATURE_X2APIC)
 #define cpu_has_xsave		boot_cpu_has(X86_FEATURE_XSAVE)
-#define cpu_has_xsaveopt	boot_cpu_has(X86_FEATURE_XSAVEOPT)
 #define cpu_has_xsaves		boot_cpu_has(X86_FEATURE_XSAVES)
 #define cpu_has_osxsave		boot_cpu_has(X86_FEATURE_OSXSAVE)
 #define cpu_has_hypervisor	boot_cpu_has(X86_FEATURE_HYPERVISOR)
-#define cpu_has_pclmulqdq	boot_cpu_has(X86_FEATURE_PCLMULQDQ)
-#define cpu_has_perfctr_core	boot_cpu_has(X86_FEATURE_PERFCTR_CORE)
-#define cpu_has_perfctr_nb	boot_cpu_has(X86_FEATURE_PERFCTR_NB)
-#define cpu_has_perfctr_l2	boot_cpu_has(X86_FEATURE_PERFCTR_L2)
-#define cpu_has_cx8		boot_cpu_has(X86_FEATURE_CX8)
-#define cpu_has_cx16		boot_cpu_has(X86_FEATURE_CX16)
-#define cpu_has_eager_fpu	boot_cpu_has(X86_FEATURE_EAGER_FPU)
-#define cpu_has_topoext		boot_cpu_has(X86_FEATURE_TOPOEXT)
-#define cpu_has_bpext		boot_cpu_has(X86_FEATURE_BPEXT)
-
-#if __GNUC__ >= 4
-extern void warn_pre_alternatives(void);
-extern bool __static_cpu_has_safe(u16 bit);
+/*
+ * Do not add any more of those clumsy macros - use static_cpu_has() for
+ * fast paths and boot_cpu_has() otherwise!
+ */
 
+#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_X86_FAST_FEATURE_TESTS)
 /*
  * Static testing of CPU features.  Used the same as boot_cpu_has().
- * These are only valid after alternatives have run, but will statically
- * patch the target code for additional performance.
+ * These will statically patch the target code for additional
+ * performance.
  */
-static __always_inline __pure bool __static_cpu_has(u16 bit)
+static __always_inline __pure bool _static_cpu_has(u16 bit)
 {
-#ifdef CC_HAVE_ASM_GOTO
-
-#ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
-
-		/*
-		 * Catch too early usage of this before alternatives
-		 * have run.
-		 */
-		asm_volatile_goto("1: jmp %l[t_warn]\n"
-			 "2:\n"
-			 ".section .altinstructions,\"a\"\n"
-			 " .long 1b - .\n"
-			 " .long 0\n"		/* no replacement */
-			 " .word %P0\n"		/* 1: do replace */
-			 " .byte 2b - 1b\n"	/* source len */
-			 " .byte 0\n"		/* replacement len */
-			 " .byte 0\n"		/* pad len */
-			 ".previous\n"
-			 /* skipping size check since replacement size = 0 */
-			 : : "i" (X86_FEATURE_ALWAYS) : : t_warn);
-
-#endif
-
-		asm_volatile_goto("1: jmp %l[t_no]\n"
-			 "2:\n"
-			 ".section .altinstructions,\"a\"\n"
-			 " .long 1b - .\n"
-			 " .long 0\n"		/* no replacement */
-			 " .word %P0\n"		/* feature bit */
-			 " .byte 2b - 1b\n"	/* source len */
-			 " .byte 0\n"		/* replacement len */
-			 " .byte 0\n"		/* pad len */
-			 ".previous\n"
-			 /* skipping size check since replacement size = 0 */
-			 : : "i" (bit) : : t_no);
-		return true;
-	t_no:
-		return false;
-
-#ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
-	t_warn:
-		warn_pre_alternatives();
-		return false;
-#endif
-
-#else /* CC_HAVE_ASM_GOTO */
-
-		u8 flag;
-		/* Open-coded due to __stringify() in ALTERNATIVE() */
-		asm volatile("1: movb $0,%0\n"
-			     "2:\n"
-			     ".section .altinstructions,\"a\"\n"
-			     " .long 1b - .\n"
-			     " .long 3f - .\n"
-			     " .word %P1\n"		/* feature bit */
-			     " .byte 2b - 1b\n"		/* source len */
-			     " .byte 4f - 3f\n"		/* replacement len */
-			     " .byte 0\n"		/* pad len */
-			     ".previous\n"
-			     ".section .discard,\"aw\",@progbits\n"
-			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
-			     ".previous\n"
-			     ".section .altinstr_replacement,\"ax\"\n"
-			     "3: movb $1,%0\n"
-			     "4:\n"
-			     ".previous\n"
-			     : "=qm" (flag) : "i" (bit));
-		return flag;
-
-#endif /* CC_HAVE_ASM_GOTO */
-}
-
-#define static_cpu_has(bit)					\
-(								\
-	__builtin_constant_p(boot_cpu_has(bit)) ?		\
-		boot_cpu_has(bit) :				\
-	__builtin_constant_p(bit) ?				\
-		__static_cpu_has(bit) :				\
-		boot_cpu_has(bit)				\
-)
-
-static __always_inline __pure bool _static_cpu_has_safe(u16 bit)
-{
-#ifdef CC_HAVE_ASM_GOTO
-		asm_volatile_goto("1: jmp %l[t_dynamic]\n"
+		asm_volatile_goto("1: jmp 6f\n"
 			 "2:\n"
 			 ".skip -(((5f-4f) - (2b-1b)) > 0) * "
 			         "((5f-4f) - (2b-1b)),0x90\n"
@@ -528,66 +176,34 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit)
 			 " .byte 0\n"			/* repl len */
 			 " .byte 0\n"			/* pad len */
 			 ".previous\n"
-			 : : "i" (bit), "i" (X86_FEATURE_ALWAYS)
-			 : : t_dynamic, t_no);
+			 ".section .altinstr_aux,\"ax\"\n"
+			 "6:\n"
+			 " testb %[bitnum],%[cap_byte]\n"
+			 " jnz %l[t_yes]\n"
+			 " jmp %l[t_no]\n"
+			 ".previous\n"
+			 : : "i" (bit), "i" (X86_FEATURE_ALWAYS),
+			     [bitnum] "i" (1 << (bit & 7)),
+			     [cap_byte] "m" (((const char *)boot_cpu_data.x86_capability)[bit >> 3])
+			 : : t_yes, t_no);
+	t_yes:
 		return true;
 	t_no:
 		return false;
-	t_dynamic:
-		return __static_cpu_has_safe(bit);
-#else
-		u8 flag;
-		/* Open-coded due to __stringify() in ALTERNATIVE() */
-		asm volatile("1: movb $2,%0\n"
-			     "2:\n"
-			     ".section .altinstructions,\"a\"\n"
-			     " .long 1b - .\n"		/* src offset */
-			     " .long 3f - .\n"		/* repl offset */
-			     " .word %P2\n"		/* always replace */
-			     " .byte 2b - 1b\n"		/* source len */
-			     " .byte 4f - 3f\n"		/* replacement len */
-			     " .byte 0\n"		/* pad len */
-			     ".previous\n"
-			     ".section .discard,\"aw\",@progbits\n"
-			     " .byte 0xff + (4f-3f) - (2b-1b)\n" /* size check */
-			     ".previous\n"
-			     ".section .altinstr_replacement,\"ax\"\n"
-			     "3: movb $0,%0\n"
-			     "4:\n"
-			     ".previous\n"
-			     ".section .altinstructions,\"a\"\n"
-			     " .long 1b - .\n"		/* src offset */
-			     " .long 5f - .\n"		/* repl offset */
-			     " .word %P1\n"		/* feature bit */
-			     " .byte 4b - 3b\n"		/* src len */
-			     " .byte 6f - 5f\n"		/* repl len */
-			     " .byte 0\n"		/* pad len */
-			     ".previous\n"
-			     ".section .discard,\"aw\",@progbits\n"
-			     " .byte 0xff + (6f-5f) - (4b-3b)\n" /* size check */
-			     ".previous\n"
-			     ".section .altinstr_replacement,\"ax\"\n"
-			     "5: movb $1,%0\n"
-			     "6:\n"
-			     ".previous\n"
-			     : "=qm" (flag)
-			     : "i" (bit), "i" (X86_FEATURE_ALWAYS));
-		return (flag == 2 ? __static_cpu_has_safe(bit) : flag);
-#endif /* CC_HAVE_ASM_GOTO */
 }
 
-#define static_cpu_has_safe(bit)				\
+#define static_cpu_has(bit)					\
 (								\
 	__builtin_constant_p(boot_cpu_has(bit)) ?		\
 		boot_cpu_has(bit) :				\
-		_static_cpu_has_safe(bit)			\
+		_static_cpu_has(bit)				\
 )
 #else
 /*
- * gcc 3.x is too stupid to do the static test; fall back to dynamic.
+ * Fall back to dynamic for gcc versions which don't support asm goto. Should be
+ * a minority now anyway.
  */
 #define static_cpu_has(bit)		boot_cpu_has(bit)
-#define static_cpu_has_safe(bit)	boot_cpu_has(bit)
 #endif
 
 #define cpu_has_bug(c, bit)		cpu_has(c, (bit))
@@ -595,7 +211,6 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit)
 #define clear_cpu_bug(c, bit)		clear_cpu_cap(c, (bit))
 
 #define static_cpu_has_bug(bit)		static_cpu_has((bit))
-#define static_cpu_has_bug_safe(bit)	static_cpu_has_safe((bit))
 #define boot_cpu_has_bug(bit)		cpu_has_bug(&boot_cpu_data, (bit))
 
 #define MAX_CPU_FEATURES		(NCAPINTS * 32)
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
new file mode 100644
index 000000000000..8f9afefd2dc5
--- /dev/null
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -0,0 +1,306 @@
+#ifndef _ASM_X86_CPUFEATURES_H
+#define _ASM_X86_CPUFEATURES_H
+
+#ifndef _ASM_X86_REQUIRED_FEATURES_H
+#include <asm/required-features.h>
+#endif
+
+#ifndef _ASM_X86_DISABLED_FEATURES_H
+#include <asm/disabled-features.h>
+#endif
+
+/*
+ * Defines x86 CPU feature bits
+ */
+#define NCAPINTS	17	/* N 32-bit words worth of info */
+#define NBUGINTS	1	/* N 32-bit bug flags */
+
+/*
+ * Note: If the comment begins with a quoted string, that string is used
+ * in /proc/cpuinfo instead of the macro name.  If the string is "",
+ * this feature bit is not displayed in /proc/cpuinfo at all.
+ */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
+#define X86_FEATURE_FPU		( 0*32+ 0) /* Onboard FPU */
+#define X86_FEATURE_VME		( 0*32+ 1) /* Virtual Mode Extensions */
+#define X86_FEATURE_DE		( 0*32+ 2) /* Debugging Extensions */
+#define X86_FEATURE_PSE		( 0*32+ 3) /* Page Size Extensions */
+#define X86_FEATURE_TSC		( 0*32+ 4) /* Time Stamp Counter */
+#define X86_FEATURE_MSR		( 0*32+ 5) /* Model-Specific Registers */
+#define X86_FEATURE_PAE		( 0*32+ 6) /* Physical Address Extensions */
+#define X86_FEATURE_MCE		( 0*32+ 7) /* Machine Check Exception */
+#define X86_FEATURE_CX8		( 0*32+ 8) /* CMPXCHG8 instruction */
+#define X86_FEATURE_APIC	( 0*32+ 9) /* Onboard APIC */
+#define X86_FEATURE_SEP		( 0*32+11) /* SYSENTER/SYSEXIT */
+#define X86_FEATURE_MTRR	( 0*32+12) /* Memory Type Range Registers */
+#define X86_FEATURE_PGE		( 0*32+13) /* Page Global Enable */
+#define X86_FEATURE_MCA		( 0*32+14) /* Machine Check Architecture */
+#define X86_FEATURE_CMOV	( 0*32+15) /* CMOV instructions */
+					  /* (plus FCMOVcc, FCOMI with FPU) */
+#define X86_FEATURE_PAT		( 0*32+16) /* Page Attribute Table */
+#define X86_FEATURE_PSE36	( 0*32+17) /* 36-bit PSEs */
+#define X86_FEATURE_PN		( 0*32+18) /* Processor serial number */
+#define X86_FEATURE_CLFLUSH	( 0*32+19) /* CLFLUSH instruction */
+#define X86_FEATURE_DS		( 0*32+21) /* "dts" Debug Store */
+#define X86_FEATURE_ACPI	( 0*32+22) /* ACPI via MSR */
+#define X86_FEATURE_MMX		( 0*32+23) /* Multimedia Extensions */
+#define X86_FEATURE_FXSR	( 0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
+#define X86_FEATURE_XMM		( 0*32+25) /* "sse" */
+#define X86_FEATURE_XMM2	( 0*32+26) /* "sse2" */
+#define X86_FEATURE_SELFSNOOP	( 0*32+27) /* "ss" CPU self snoop */
+#define X86_FEATURE_HT		( 0*32+28) /* Hyper-Threading */
+#define X86_FEATURE_ACC		( 0*32+29) /* "tm" Automatic clock control */
+#define X86_FEATURE_IA64	( 0*32+30) /* IA-64 processor */
+#define X86_FEATURE_PBE		( 0*32+31) /* Pending Break Enable */
+
+/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
+/* Don't duplicate feature flags which are redundant with Intel! */
+#define X86_FEATURE_SYSCALL	( 1*32+11) /* SYSCALL/SYSRET */
+#define X86_FEATURE_MP		( 1*32+19) /* MP Capable. */
+#define X86_FEATURE_NX		( 1*32+20) /* Execute Disable */
+#define X86_FEATURE_MMXEXT	( 1*32+22) /* AMD MMX extensions */
+#define X86_FEATURE_FXSR_OPT	( 1*32+25) /* FXSAVE/FXRSTOR optimizations */
+#define X86_FEATURE_GBPAGES	( 1*32+26) /* "pdpe1gb" GB pages */
+#define X86_FEATURE_RDTSCP	( 1*32+27) /* RDTSCP */
+#define X86_FEATURE_LM		( 1*32+29) /* Long Mode (x86-64) */
+#define X86_FEATURE_3DNOWEXT	( 1*32+30) /* AMD 3DNow! extensions */
+#define X86_FEATURE_3DNOW	( 1*32+31) /* 3DNow! */
+
+/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
+#define X86_FEATURE_RECOVERY	( 2*32+ 0) /* CPU in recovery mode */
+#define X86_FEATURE_LONGRUN	( 2*32+ 1) /* Longrun power control */
+#define X86_FEATURE_LRTI	( 2*32+ 3) /* LongRun table interface */
+
+/* Other features, Linux-defined mapping, word 3 */
+/* This range is used for feature bits which conflict or are synthesized */
+#define X86_FEATURE_CXMMX	( 3*32+ 0) /* Cyrix MMX extensions */
+#define X86_FEATURE_K6_MTRR	( 3*32+ 1) /* AMD K6 nonstandard MTRRs */
+#define X86_FEATURE_CYRIX_ARR	( 3*32+ 2) /* Cyrix ARRs (= MTRRs) */
+#define X86_FEATURE_CENTAUR_MCR	( 3*32+ 3) /* Centaur MCRs (= MTRRs) */
+/* cpu types for specific tunings: */
+#define X86_FEATURE_K8		( 3*32+ 4) /* "" Opteron, Athlon64 */
+#define X86_FEATURE_K7		( 3*32+ 5) /* "" Athlon */
+#define X86_FEATURE_P3		( 3*32+ 6) /* "" P3 */
+#define X86_FEATURE_P4		( 3*32+ 7) /* "" P4 */
+#define X86_FEATURE_CONSTANT_TSC ( 3*32+ 8) /* TSC ticks at a constant rate */
+#define X86_FEATURE_UP		( 3*32+ 9) /* smp kernel running on up */
+#define X86_FEATURE_ART		( 3*32+10) /* Platform has always running timer (ART) */
+#define X86_FEATURE_ARCH_PERFMON ( 3*32+11) /* Intel Architectural PerfMon */
+#define X86_FEATURE_PEBS	( 3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS		( 3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32	( 3*32+14) /* "" syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32	( 3*32+15) /* "" sysenter in ia32 userspace */
+#define X86_FEATURE_REP_GOOD	( 3*32+16) /* rep microcode works well */
+#define X86_FEATURE_MFENCE_RDTSC ( 3*32+17) /* "" Mfence synchronizes RDTSC */
+#define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) /* "" Lfence synchronizes RDTSC */
+#define X86_FEATURE_ACC_POWER	( 3*32+19) /* AMD Accumulated Power Mechanism */
+#define X86_FEATURE_NOPL	( 3*32+20) /* The NOPL (0F 1F) instructions */
+#define X86_FEATURE_ALWAYS	( 3*32+21) /* "" Always-present feature */
+#define X86_FEATURE_XTOPOLOGY	( 3*32+22) /* cpu topology enum extensions */
+#define X86_FEATURE_TSC_RELIABLE ( 3*32+23) /* TSC is known to be reliable */
+#define X86_FEATURE_NONSTOP_TSC	( 3*32+24) /* TSC does not stop in C states */
+/* free, was #define X86_FEATURE_CLFLUSH_MONITOR ( 3*32+25) * "" clflush reqd with monitor */
+#define X86_FEATURE_EXTD_APICID	( 3*32+26) /* has extended APICID (8 bits) */
+#define X86_FEATURE_AMD_DCM     ( 3*32+27) /* multi-node processor */
+#define X86_FEATURE_APERFMPERF	( 3*32+28) /* APERFMPERF */
+#define X86_FEATURE_EAGER_FPU	( 3*32+29) /* "eagerfpu" Non lazy FPU restore */
+#define X86_FEATURE_NONSTOP_TSC_S3 ( 3*32+30) /* TSC doesn't stop in S3 state */
+#define X86_FEATURE_MCE_RECOVERY ( 3*32+31) /* cpu has recoverable machine checks */
+
+/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
+#define X86_FEATURE_XMM3	( 4*32+ 0) /* "pni" SSE-3 */
+#define X86_FEATURE_PCLMULQDQ	( 4*32+ 1) /* PCLMULQDQ instruction */
+#define X86_FEATURE_DTES64	( 4*32+ 2) /* 64-bit Debug Store */
+#define X86_FEATURE_MWAIT	( 4*32+ 3) /* "monitor" Monitor/Mwait support */
+#define X86_FEATURE_DSCPL	( 4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
+#define X86_FEATURE_VMX		( 4*32+ 5) /* Hardware virtualization */
+#define X86_FEATURE_SMX		( 4*32+ 6) /* Safer mode */
+#define X86_FEATURE_EST		( 4*32+ 7) /* Enhanced SpeedStep */
+#define X86_FEATURE_TM2		( 4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_SSSE3	( 4*32+ 9) /* Supplemental SSE-3 */
+#define X86_FEATURE_CID		( 4*32+10) /* Context ID */
+#define X86_FEATURE_SDBG	( 4*32+11) /* Silicon Debug */
+#define X86_FEATURE_FMA		( 4*32+12) /* Fused multiply-add */
+#define X86_FEATURE_CX16	( 4*32+13) /* CMPXCHG16B */
+#define X86_FEATURE_XTPR	( 4*32+14) /* Send Task Priority Messages */
+#define X86_FEATURE_PDCM	( 4*32+15) /* Performance Capabilities */
+#define X86_FEATURE_PCID	( 4*32+17) /* Process Context Identifiers */
+#define X86_FEATURE_DCA		( 4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_1	( 4*32+19) /* "sse4_1" SSE-4.1 */
+#define X86_FEATURE_XMM4_2	( 4*32+20) /* "sse4_2" SSE-4.2 */
+#define X86_FEATURE_X2APIC	( 4*32+21) /* x2APIC */
+#define X86_FEATURE_MOVBE	( 4*32+22) /* MOVBE instruction */
+#define X86_FEATURE_POPCNT      ( 4*32+23) /* POPCNT instruction */
+#define X86_FEATURE_TSC_DEADLINE_TIMER	( 4*32+24) /* Tsc deadline timer */
+#define X86_FEATURE_AES		( 4*32+25) /* AES instructions */
+#define X86_FEATURE_XSAVE	( 4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
+#define X86_FEATURE_OSXSAVE	( 4*32+27) /* "" XSAVE enabled in the OS */
+#define X86_FEATURE_AVX		( 4*32+28) /* Advanced Vector Extensions */
+#define X86_FEATURE_F16C	( 4*32+29) /* 16-bit fp conversions */
+#define X86_FEATURE_RDRAND	( 4*32+30) /* The RDRAND instruction */
+#define X86_FEATURE_HYPERVISOR	( 4*32+31) /* Running on a hypervisor */
+
+/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
+#define X86_FEATURE_XSTORE	( 5*32+ 2) /* "rng" RNG present (xstore) */
+#define X86_FEATURE_XSTORE_EN	( 5*32+ 3) /* "rng_en" RNG enabled */
+#define X86_FEATURE_XCRYPT	( 5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
+#define X86_FEATURE_XCRYPT_EN	( 5*32+ 7) /* "ace_en" on-CPU crypto enabled */
+#define X86_FEATURE_ACE2	( 5*32+ 8) /* Advanced Cryptography Engine v2 */
+#define X86_FEATURE_ACE2_EN	( 5*32+ 9) /* ACE v2 enabled */
+#define X86_FEATURE_PHE		( 5*32+10) /* PadLock Hash Engine */
+#define X86_FEATURE_PHE_EN	( 5*32+11) /* PHE enabled */
+#define X86_FEATURE_PMM		( 5*32+12) /* PadLock Montgomery Multiplier */
+#define X86_FEATURE_PMM_EN	( 5*32+13) /* PMM enabled */
+
+/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
+#define X86_FEATURE_LAHF_LM	( 6*32+ 0) /* LAHF/SAHF in long mode */
+#define X86_FEATURE_CMP_LEGACY	( 6*32+ 1) /* If yes HyperThreading not valid */
+#define X86_FEATURE_SVM		( 6*32+ 2) /* Secure virtual machine */
+#define X86_FEATURE_EXTAPIC	( 6*32+ 3) /* Extended APIC space */
+#define X86_FEATURE_CR8_LEGACY	( 6*32+ 4) /* CR8 in 32-bit mode */
+#define X86_FEATURE_ABM		( 6*32+ 5) /* Advanced bit manipulation */
+#define X86_FEATURE_SSE4A	( 6*32+ 6) /* SSE-4A */
+#define X86_FEATURE_MISALIGNSSE ( 6*32+ 7) /* Misaligned SSE mode */
+#define X86_FEATURE_3DNOWPREFETCH ( 6*32+ 8) /* 3DNow prefetch instructions */
+#define X86_FEATURE_OSVW	( 6*32+ 9) /* OS Visible Workaround */
+#define X86_FEATURE_IBS		( 6*32+10) /* Instruction Based Sampling */
+#define X86_FEATURE_XOP		( 6*32+11) /* extended AVX instructions */
+#define X86_FEATURE_SKINIT	( 6*32+12) /* SKINIT/STGI instructions */
+#define X86_FEATURE_WDT		( 6*32+13) /* Watchdog timer */
+#define X86_FEATURE_LWP		( 6*32+15) /* Light Weight Profiling */
+#define X86_FEATURE_FMA4	( 6*32+16) /* 4 operands MAC instructions */
+#define X86_FEATURE_TCE		( 6*32+17) /* translation cache extension */
+#define X86_FEATURE_NODEID_MSR	( 6*32+19) /* NodeId MSR */
+#define X86_FEATURE_TBM		( 6*32+21) /* trailing bit manipulations */
+#define X86_FEATURE_TOPOEXT	( 6*32+22) /* topology extensions CPUID leafs */
+#define X86_FEATURE_PERFCTR_CORE ( 6*32+23) /* core performance counter extensions */
+#define X86_FEATURE_PERFCTR_NB  ( 6*32+24) /* NB performance counter extensions */
+#define X86_FEATURE_BPEXT	(6*32+26) /* data breakpoint extension */
+#define X86_FEATURE_PERFCTR_L2	( 6*32+28) /* L2 performance counter extensions */
+#define X86_FEATURE_MWAITX	( 6*32+29) /* MWAIT extension (MONITORX/MWAITX) */
+
+/*
+ * Auxiliary flags: Linux defined - For features scattered in various
+ * CPUID levels like 0x6, 0xA etc, word 7.
+ *
+ * Reuse free bits when adding new feature flags!
+ */
+
+#define X86_FEATURE_CPB		( 7*32+ 2) /* AMD Core Performance Boost */
+#define X86_FEATURE_EPB		( 7*32+ 3) /* IA32_ENERGY_PERF_BIAS support */
+
+#define X86_FEATURE_HW_PSTATE	( 7*32+ 8) /* AMD HW-PState */
+#define X86_FEATURE_PROC_FEEDBACK ( 7*32+ 9) /* AMD ProcFeedbackInterface */
+
+#define X86_FEATURE_INTEL_PT	( 7*32+15) /* Intel Processor Trace */
+
+/* Virtualization flags: Linux defined, word 8 */
+#define X86_FEATURE_TPR_SHADOW  ( 8*32+ 0) /* Intel TPR Shadow */
+#define X86_FEATURE_VNMI        ( 8*32+ 1) /* Intel Virtual NMI */
+#define X86_FEATURE_FLEXPRIORITY ( 8*32+ 2) /* Intel FlexPriority */
+#define X86_FEATURE_EPT         ( 8*32+ 3) /* Intel Extended Page Table */
+#define X86_FEATURE_VPID        ( 8*32+ 4) /* Intel Virtual Processor ID */
+
+#define X86_FEATURE_VMMCALL     ( 8*32+15) /* Prefer vmmcall to vmcall */
+#define X86_FEATURE_XENPV       ( 8*32+16) /* "" Xen paravirtual guest */
+
+
+/* Intel-defined CPU features, CPUID level 0x00000007:0 (ebx), word 9 */
+#define X86_FEATURE_FSGSBASE	( 9*32+ 0) /* {RD/WR}{FS/GS}BASE instructions*/
+#define X86_FEATURE_TSC_ADJUST	( 9*32+ 1) /* TSC adjustment MSR 0x3b */
+#define X86_FEATURE_BMI1	( 9*32+ 3) /* 1st group bit manipulation extensions */
+#define X86_FEATURE_HLE		( 9*32+ 4) /* Hardware Lock Elision */
+#define X86_FEATURE_AVX2	( 9*32+ 5) /* AVX2 instructions */
+#define X86_FEATURE_SMEP	( 9*32+ 7) /* Supervisor Mode Execution Protection */
+#define X86_FEATURE_BMI2	( 9*32+ 8) /* 2nd group bit manipulation extensions */
+#define X86_FEATURE_ERMS	( 9*32+ 9) /* Enhanced REP MOVSB/STOSB */
+#define X86_FEATURE_INVPCID	( 9*32+10) /* Invalidate Processor Context ID */
+#define X86_FEATURE_RTM		( 9*32+11) /* Restricted Transactional Memory */
+#define X86_FEATURE_CQM		( 9*32+12) /* Cache QoS Monitoring */
+#define X86_FEATURE_MPX		( 9*32+14) /* Memory Protection Extension */
+#define X86_FEATURE_AVX512F	( 9*32+16) /* AVX-512 Foundation */
+#define X86_FEATURE_AVX512DQ	( 9*32+17) /* AVX-512 DQ (Double/Quad granular) Instructions */
+#define X86_FEATURE_RDSEED	( 9*32+18) /* The RDSEED instruction */
+#define X86_FEATURE_ADX		( 9*32+19) /* The ADCX and ADOX instructions */
+#define X86_FEATURE_SMAP	( 9*32+20) /* Supervisor Mode Access Prevention */
+#define X86_FEATURE_PCOMMIT	( 9*32+22) /* PCOMMIT instruction */
+#define X86_FEATURE_CLFLUSHOPT	( 9*32+23) /* CLFLUSHOPT instruction */
+#define X86_FEATURE_CLWB	( 9*32+24) /* CLWB instruction */
+#define X86_FEATURE_AVX512PF	( 9*32+26) /* AVX-512 Prefetch */
+#define X86_FEATURE_AVX512ER	( 9*32+27) /* AVX-512 Exponential and Reciprocal */
+#define X86_FEATURE_AVX512CD	( 9*32+28) /* AVX-512 Conflict Detection */
+#define X86_FEATURE_SHA_NI	( 9*32+29) /* SHA1/SHA256 Instruction Extensions */
+#define X86_FEATURE_AVX512BW	( 9*32+30) /* AVX-512 BW (Byte/Word granular) Instructions */
+#define X86_FEATURE_AVX512VL	( 9*32+31) /* AVX-512 VL (128/256 Vector Length) Extensions */
+
+/* Extended state features, CPUID level 0x0000000d:1 (eax), word 10 */
+#define X86_FEATURE_XSAVEOPT	(10*32+ 0) /* XSAVEOPT */
+#define X86_FEATURE_XSAVEC	(10*32+ 1) /* XSAVEC */
+#define X86_FEATURE_XGETBV1	(10*32+ 2) /* XGETBV with ECX = 1 */
+#define X86_FEATURE_XSAVES	(10*32+ 3) /* XSAVES/XRSTORS */
+
+/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:0 (edx), word 11 */
+#define X86_FEATURE_CQM_LLC	(11*32+ 1) /* LLC QoS if 1 */
+
+/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:1 (edx), word 12 */
+#define X86_FEATURE_CQM_OCCUP_LLC (12*32+ 0) /* LLC occupancy monitoring if 1 */
+#define X86_FEATURE_CQM_MBM_TOTAL (12*32+ 1) /* LLC Total MBM monitoring */
+#define X86_FEATURE_CQM_MBM_LOCAL (12*32+ 2) /* LLC Local MBM monitoring */
+
+/* AMD-defined CPU features, CPUID level 0x80000008 (ebx), word 13 */
+#define X86_FEATURE_CLZERO	(13*32+0) /* CLZERO instruction */
+
+/* Thermal and Power Management Leaf, CPUID level 0x00000006 (eax), word 14 */
+#define X86_FEATURE_DTHERM	(14*32+ 0) /* Digital Thermal Sensor */
+#define X86_FEATURE_IDA		(14*32+ 1) /* Intel Dynamic Acceleration */
+#define X86_FEATURE_ARAT	(14*32+ 2) /* Always Running APIC Timer */
+#define X86_FEATURE_PLN		(14*32+ 4) /* Intel Power Limit Notification */
+#define X86_FEATURE_PTS		(14*32+ 6) /* Intel Package Thermal Status */
+#define X86_FEATURE_HWP		(14*32+ 7) /* Intel Hardware P-states */
+#define X86_FEATURE_HWP_NOTIFY	(14*32+ 8) /* HWP Notification */
+#define X86_FEATURE_HWP_ACT_WINDOW (14*32+ 9) /* HWP Activity Window */
+#define X86_FEATURE_HWP_EPP	(14*32+10) /* HWP Energy Perf. Preference */
+#define X86_FEATURE_HWP_PKG_REQ (14*32+11) /* HWP Package Level Request */
+
+/* AMD SVM Feature Identification, CPUID level 0x8000000a (edx), word 15 */
+#define X86_FEATURE_NPT		(15*32+ 0) /* Nested Page Table support */
+#define X86_FEATURE_LBRV	(15*32+ 1) /* LBR Virtualization support */
+#define X86_FEATURE_SVML	(15*32+ 2) /* "svm_lock" SVM locking MSR */
+#define X86_FEATURE_NRIPS	(15*32+ 3) /* "nrip_save" SVM next_rip save */
+#define X86_FEATURE_TSCRATEMSR  (15*32+ 4) /* "tsc_scale" TSC scaling support */
+#define X86_FEATURE_VMCBCLEAN   (15*32+ 5) /* "vmcb_clean" VMCB clean bits support */
+#define X86_FEATURE_FLUSHBYASID (15*32+ 6) /* flush-by-ASID support */
+#define X86_FEATURE_DECODEASSISTS (15*32+ 7) /* Decode Assists support */
+#define X86_FEATURE_PAUSEFILTER (15*32+10) /* filtered pause intercept */
+#define X86_FEATURE_PFTHRESHOLD (15*32+12) /* pause filter threshold */
+#define X86_FEATURE_AVIC	(15*32+13) /* Virtual Interrupt Controller */
+
+/* Intel-defined CPU features, CPUID level 0x00000007:0 (ecx), word 16 */
+#define X86_FEATURE_PKU		(16*32+ 3) /* Protection Keys for Userspace */
+#define X86_FEATURE_OSPKE	(16*32+ 4) /* OS Protection Keys Enable */
+
+/*
+ * BUG word(s)
+ */
+#define X86_BUG(x)		(NCAPINTS*32 + (x))
+
+#define X86_BUG_F00F		X86_BUG(0) /* Intel F00F */
+#define X86_BUG_FDIV		X86_BUG(1) /* FPU FDIV */
+#define X86_BUG_COMA		X86_BUG(2) /* Cyrix 6x86 coma */
+#define X86_BUG_AMD_TLB_MMATCH	X86_BUG(3) /* "tlb_mmatch" AMD Erratum 383 */
+#define X86_BUG_AMD_APIC_C1E	X86_BUG(4) /* "apic_c1e" AMD Erratum 400 */
+#define X86_BUG_11AP		X86_BUG(5) /* Bad local APIC aka 11AP */
+#define X86_BUG_FXSAVE_LEAK	X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */
+#define X86_BUG_CLFLUSH_MONITOR	X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */
+#define X86_BUG_SYSRET_SS_ATTRS	X86_BUG(8) /* SYSRET doesn't fix up SS attrs */
+
+#ifdef CONFIG_X86_32
+/*
+ * 64-bit kernels don't use X86_BUG_ESPFIX.  Make the define conditional
+ * to avoid confusion.
+ */
+#define X86_BUG_ESPFIX		X86_BUG(9) /* "" IRET to 16-bit SS corrupts ESP/RSP high bits */
+#endif
+
+#endif /* _ASM_X86_CPUFEATURES_H */
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index 278441f39856..eb5deb42484d 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -98,4 +98,27 @@ struct desc_ptr {
 
 #endif /* !__ASSEMBLY__ */
 
+/* Access rights as returned by LAR */
+#define AR_TYPE_RODATA		(0 * (1 << 9))
+#define AR_TYPE_RWDATA		(1 * (1 << 9))
+#define AR_TYPE_RODATA_EXPDOWN	(2 * (1 << 9))
+#define AR_TYPE_RWDATA_EXPDOWN	(3 * (1 << 9))
+#define AR_TYPE_XOCODE		(4 * (1 << 9))
+#define AR_TYPE_XRCODE		(5 * (1 << 9))
+#define AR_TYPE_XOCODE_CONF	(6 * (1 << 9))
+#define AR_TYPE_XRCODE_CONF	(7 * (1 << 9))
+#define AR_TYPE_MASK		(7 * (1 << 9))
+
+#define AR_DPL0			(0 * (1 << 13))
+#define AR_DPL3			(3 * (1 << 13))
+#define AR_DPL_MASK		(3 * (1 << 13))
+
+#define AR_A			(1 << 8)   /* "Accessed" */
+#define AR_S			(1 << 12)  /* If clear, "System" segment */
+#define AR_P			(1 << 15)  /* "Present" */
+#define AR_AVL			(1 << 20)  /* "AVaiLable" (no HW effect) */
+#define AR_L			(1 << 21)  /* "Long mode" for code segments */
+#define AR_DB			(1 << 22)  /* D/B, effect depends on type */
+#define AR_G			(1 << 23)  /* "Granularity" (limit in pages) */
+
 #endif /* _ASM_X86_DESC_DEFS_H */
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 03dd72957d2f..684ed6c3aa67 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -10,6 +10,16 @@ struct dev_archdata {
 #endif
 };
 
+#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
+struct dma_domain {
+	struct list_head node;
+	struct dma_map_ops *dma_ops;
+	int domain_nr;
+};
+void add_dma_domain(struct dma_domain *domain);
+void del_dma_domain(struct dma_domain *domain);
+#endif
+
 struct pdev_archdata {
 };
 
diff --git a/arch/x86/include/asm/disabled-features.h b/arch/x86/include/asm/disabled-features.h
index f226df064660..39343be7d4f4 100644
--- a/arch/x86/include/asm/disabled-features.h
+++ b/arch/x86/include/asm/disabled-features.h
@@ -28,6 +28,14 @@
 # define DISABLE_CENTAUR_MCR	0
 #endif /* CONFIG_X86_64 */
 
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+# define DISABLE_PKU		(1<<(X86_FEATURE_PKU))
+# define DISABLE_OSPKE		(1<<(X86_FEATURE_OSPKE))
+#else
+# define DISABLE_PKU		0
+# define DISABLE_OSPKE		0
+#endif /* CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS */
+
 /*
  * Make sure to add features to the correct mask
  */
@@ -41,5 +49,12 @@
 #define DISABLED_MASK7	0
 #define DISABLED_MASK8	0
 #define DISABLED_MASK9	(DISABLE_MPX)
+#define DISABLED_MASK10	0
+#define DISABLED_MASK11	0
+#define DISABLED_MASK12	0
+#define DISABLED_MASK13	0
+#define DISABLED_MASK14	0
+#define DISABLED_MASK15	0
+#define DISABLED_MASK16	(DISABLE_PKU|DISABLE_OSPKE)
 
 #endif /* _ASM_X86_DISABLED_FEATURES_H */
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 953b7263f844..3a27b93e6261 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -46,8 +46,6 @@ bool arch_dma_alloc_attrs(struct device **dev, gfp_t *gfp);
 #define HAVE_ARCH_DMA_SUPPORTED 1
 extern int dma_supported(struct device *hwdev, u64 mask);
 
-#include <asm-generic/dma-mapping-common.h>
-
 extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 					dma_addr_t *dma_addr, gfp_t flag,
 					struct dma_attrs *attrs);
diff --git a/arch/x86/include/asm/dmi.h b/arch/x86/include/asm/dmi.h
index 535192f6bfad..3c69fed215c5 100644
--- a/arch/x86/include/asm/dmi.h
+++ b/arch/x86/include/asm/dmi.h
@@ -15,7 +15,7 @@ static __always_inline __init void *dmi_alloc(unsigned len)
 /* Use early IO mappings for DMI because it's initialized early */
 #define dmi_early_remap		early_ioremap
 #define dmi_early_unmap		early_iounmap
-#define dmi_remap		ioremap
+#define dmi_remap		ioremap_cache
 #define dmi_unmap		iounmap
 
 #endif /* _ASM_X86_DMI_H */
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index 0010c78c4998..53748c45e488 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -3,6 +3,7 @@
 
 #include <asm/fpu/api.h>
 #include <asm/pgtable.h>
+#include <asm/tlb.h>
 
 /*
  * We map the EFI regions needed for runtime services non-contiguously,
@@ -25,6 +26,8 @@
 #define EFI32_LOADER_SIGNATURE	"EL32"
 #define EFI64_LOADER_SIGNATURE	"EL64"
 
+#define MAX_CMDLINE_ADDRESS	UINT_MAX
+
 #ifdef CONFIG_X86_32
 
 
@@ -64,6 +67,17 @@ extern u64 asmlinkage efi_call(void *fp, ...);
 
 #define efi_call_phys(f, args...)		efi_call((f), args)
 
+/*
+ * Scratch space used for switching the pagetable in the EFI stub
+ */
+struct efi_scratch {
+	u64	r15;
+	u64	prev_cr3;
+	pgd_t	*efi_pgt;
+	bool	use_pgd;
+	u64	phys_stack;
+} __packed;
+
 #define efi_call_virt(f, ...)						\
 ({									\
 	efi_status_t __s;						\
@@ -71,7 +85,20 @@ extern u64 asmlinkage efi_call(void *fp, ...);
 	efi_sync_low_kernel_mappings();					\
 	preempt_disable();						\
 	__kernel_fpu_begin();						\
+									\
+	if (efi_scratch.use_pgd) {					\
+		efi_scratch.prev_cr3 = read_cr3();			\
+		write_cr3((unsigned long)efi_scratch.efi_pgt);		\
+		__flush_tlb_all();					\
+	}								\
+									\
 	__s = efi_call((void *)efi.systab->runtime->f, __VA_ARGS__);	\
+									\
+	if (efi_scratch.use_pgd) {					\
+		write_cr3(efi_scratch.prev_cr3);			\
+		__flush_tlb_all();					\
+	}								\
+									\
 	__kernel_fpu_end();						\
 	preempt_enable();						\
 	__s;								\
@@ -111,11 +138,12 @@ extern void __init efi_memory_uc(u64 addr, unsigned long size);
 extern void __init efi_map_region(efi_memory_desc_t *md);
 extern void __init efi_map_region_fixed(efi_memory_desc_t *md);
 extern void efi_sync_low_kernel_mappings(void);
+extern int __init efi_alloc_page_tables(void);
 extern int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages);
 extern void __init efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages);
 extern void __init old_map_region(efi_memory_desc_t *md);
 extern void __init runtime_code_page_mkexec(void);
-extern void __init efi_runtime_mkexec(void);
+extern void __init efi_runtime_update_mappings(void);
 extern void __init efi_dump_pagetable(void);
 extern void __init efi_apply_memmap_quirks(void);
 extern int __init efi_reuse_config(u64 tables, int nr_tables);
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 1514753fd435..15340e36ddcb 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -256,7 +256,7 @@ extern int force_personality32;
    instruction set this CPU supports.  This could be done in user space,
    but it's not easy, and we've already done it here.  */
 
-#define ELF_HWCAP		(boot_cpu_data.x86_capability[0])
+#define ELF_HWCAP		(boot_cpu_data.x86_capability[CPUID_1_EDX])
 
 /* This yields a string that ld.so will use to load implementation
    specific libraries for optimization.  This is more specific in
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index f80d70009ff8..8554f960e21b 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -19,7 +19,6 @@
 #include <asm/acpi.h>
 #include <asm/apicdef.h>
 #include <asm/page.h>
-#include <asm/pvclock.h>
 #ifdef CONFIG_X86_32
 #include <linux/threads.h>
 #include <asm/kmap_types.h>
@@ -72,10 +71,6 @@ enum fixed_addresses {
 #ifdef CONFIG_X86_VSYSCALL_EMULATION
 	VSYSCALL_PAGE = (FIXADDR_TOP - VSYSCALL_ADDR) >> PAGE_SHIFT,
 #endif
-#ifdef CONFIG_PARAVIRT_CLOCK
-	PVCLOCK_FIXMAP_BEGIN,
-	PVCLOCK_FIXMAP_END = PVCLOCK_FIXMAP_BEGIN+PVCLOCK_VSYSCALL_NR_PAGES-1,
-#endif
 #endif
 	FIX_DBGP_BASE,
 	FIX_EARLYCON_MEM_BASE,
@@ -143,7 +138,7 @@ extern void reserve_top_address(unsigned long reserve);
 extern int fixmaps_set;
 
 extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
+#define kmap_prot PAGE_KERNEL
 extern pte_t *pkmap_page_table;
 
 void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 3c3550c3a4a3..31ac8e6d9f36 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -17,6 +17,7 @@
 #include <asm/user.h>
 #include <asm/fpu/api.h>
 #include <asm/fpu/xstate.h>
+#include <asm/cpufeature.h>
 
 /*
  * High level FPU state handling functions:
@@ -24,6 +25,8 @@
 extern void fpu__activate_curr(struct fpu *fpu);
 extern void fpu__activate_fpstate_read(struct fpu *fpu);
 extern void fpu__activate_fpstate_write(struct fpu *fpu);
+extern void fpu__current_fpstate_write_begin(void);
+extern void fpu__current_fpstate_write_end(void);
 extern void fpu__save(struct fpu *fpu);
 extern void fpu__restore(struct fpu *fpu);
 extern int  fpu__restore_sig(void __user *buf, int ia32_frame);
@@ -42,6 +45,7 @@ extern void fpu__init_cpu_xstate(void);
 extern void fpu__init_system(struct cpuinfo_x86 *c);
 extern void fpu__init_check_bugs(void);
 extern void fpu__resume_cpu(void);
+extern u64 fpu__get_supported_xfeatures_mask(void);
 
 /*
  * Debugging facility:
@@ -57,22 +61,22 @@ extern void fpu__resume_cpu(void);
  */
 static __always_inline __pure bool use_eager_fpu(void)
 {
-	return static_cpu_has_safe(X86_FEATURE_EAGER_FPU);
+	return static_cpu_has(X86_FEATURE_EAGER_FPU);
 }
 
 static __always_inline __pure bool use_xsaveopt(void)
 {
-	return static_cpu_has_safe(X86_FEATURE_XSAVEOPT);
+	return static_cpu_has(X86_FEATURE_XSAVEOPT);
 }
 
 static __always_inline __pure bool use_xsave(void)
 {
-	return static_cpu_has_safe(X86_FEATURE_XSAVE);
+	return static_cpu_has(X86_FEATURE_XSAVE);
 }
 
 static __always_inline __pure bool use_fxsr(void)
 {
-	return static_cpu_has_safe(X86_FEATURE_FXSR);
+	return static_cpu_has(X86_FEATURE_FXSR);
 }
 
 /*
@@ -224,18 +228,67 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
 #define XRSTOR		".byte " REX_PREFIX "0x0f,0xae,0x2f"
 #define XRSTORS		".byte " REX_PREFIX "0x0f,0xc7,0x1f"
 
-/* xstate instruction fault handler: */
-#define xstate_fault(__err)		\
-					\
-	".section .fixup,\"ax\"\n"	\
-					\
-	"3:  movl $-2,%[_err]\n"	\
-	"    jmp  2b\n"			\
-					\
-	".previous\n"			\
-					\
-	_ASM_EXTABLE(1b, 3b)		\
-	: [_err] "=r" (__err)
+#define XSTATE_OP(op, st, lmask, hmask, err)				\
+	asm volatile("1:" op "\n\t"					\
+		     "xor %[err], %[err]\n"				\
+		     "2:\n\t"						\
+		     ".pushsection .fixup,\"ax\"\n\t"			\
+		     "3: movl $-2,%[err]\n\t"				\
+		     "jmp 2b\n\t"					\
+		     ".popsection\n\t"					\
+		     _ASM_EXTABLE(1b, 3b)				\
+		     : [err] "=r" (err)					\
+		     : "D" (st), "m" (*st), "a" (lmask), "d" (hmask)	\
+		     : "memory")
+
+/*
+ * If XSAVES is enabled, it replaces XSAVEOPT because it supports a compact
+ * format and supervisor states in addition to modified optimization in
+ * XSAVEOPT.
+ *
+ * Otherwise, if XSAVEOPT is enabled, XSAVEOPT replaces XSAVE because XSAVEOPT
+ * supports modified optimization which is not supported by XSAVE.
+ *
+ * We use XSAVE as a fallback.
+ *
+ * The 661 label is defined in the ALTERNATIVE* macros as the address of the
+ * original instruction which gets replaced. We need to use it here as the
+ * address of the instruction where we might get an exception at.
+ */
+#define XSTATE_XSAVE(st, lmask, hmask, err)				\
+	asm volatile(ALTERNATIVE_2(XSAVE,				\
+				   XSAVEOPT, X86_FEATURE_XSAVEOPT,	\
+				   XSAVES,   X86_FEATURE_XSAVES)	\
+		     "\n"						\
+		     "xor %[err], %[err]\n"				\
+		     "3:\n"						\
+		     ".pushsection .fixup,\"ax\"\n"			\
+		     "4: movl $-2, %[err]\n"				\
+		     "jmp 3b\n"						\
+		     ".popsection\n"					\
+		     _ASM_EXTABLE(661b, 4b)				\
+		     : [err] "=r" (err)					\
+		     : "D" (st), "m" (*st), "a" (lmask), "d" (hmask)	\
+		     : "memory")
+
+/*
+ * Use XRSTORS to restore context if it is enabled. XRSTORS supports compact
+ * XSAVE area format.
+ */
+#define XSTATE_XRESTORE(st, lmask, hmask, err)				\
+	asm volatile(ALTERNATIVE(XRSTOR,				\
+				 XRSTORS, X86_FEATURE_XSAVES)		\
+		     "\n"						\
+		     "xor %[err], %[err]\n"				\
+		     "3:\n"						\
+		     ".pushsection .fixup,\"ax\"\n"			\
+		     "4: movl $-2, %[err]\n"				\
+		     "jmp 3b\n"						\
+		     ".popsection\n"					\
+		     _ASM_EXTABLE(661b, 4b)				\
+		     : [err] "=r" (err)					\
+		     : "D" (st), "m" (*st), "a" (lmask), "d" (hmask)	\
+		     : "memory")
 
 /*
  * This function is called only during boot time when x86 caps are not set
@@ -246,22 +299,14 @@ static inline void copy_xregs_to_kernel_booting(struct xregs_state *xstate)
 	u64 mask = -1;
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
-	int err = 0;
+	int err;
 
 	WARN_ON(system_state != SYSTEM_BOOTING);
 
-	if (boot_cpu_has(X86_FEATURE_XSAVES))
-		asm volatile("1:"XSAVES"\n\t"
-			"2:\n\t"
-			     xstate_fault(err)
-			: "D" (xstate), "m" (*xstate), "a" (lmask), "d" (hmask), "0" (err)
-			: "memory");
+	if (static_cpu_has(X86_FEATURE_XSAVES))
+		XSTATE_OP(XSAVES, xstate, lmask, hmask, err);
 	else
-		asm volatile("1:"XSAVE"\n\t"
-			"2:\n\t"
-			     xstate_fault(err)
-			: "D" (xstate), "m" (*xstate), "a" (lmask), "d" (hmask), "0" (err)
-			: "memory");
+		XSTATE_OP(XSAVE, xstate, lmask, hmask, err);
 
 	/* We should never fault when copying to a kernel buffer: */
 	WARN_ON_FPU(err);
@@ -276,22 +321,14 @@ static inline void copy_kernel_to_xregs_booting(struct xregs_state *xstate)
 	u64 mask = -1;
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
-	int err = 0;
+	int err;
 
 	WARN_ON(system_state != SYSTEM_BOOTING);
 
-	if (boot_cpu_has(X86_FEATURE_XSAVES))
-		asm volatile("1:"XRSTORS"\n\t"
-			"2:\n\t"
-			     xstate_fault(err)
-			: "D" (xstate), "m" (*xstate), "a" (lmask), "d" (hmask), "0" (err)
-			: "memory");
+	if (static_cpu_has(X86_FEATURE_XSAVES))
+		XSTATE_OP(XRSTORS, xstate, lmask, hmask, err);
 	else
-		asm volatile("1:"XRSTOR"\n\t"
-			"2:\n\t"
-			     xstate_fault(err)
-			: "D" (xstate), "m" (*xstate), "a" (lmask), "d" (hmask), "0" (err)
-			: "memory");
+		XSTATE_OP(XRSTOR, xstate, lmask, hmask, err);
 
 	/* We should never fault when copying from a kernel buffer: */
 	WARN_ON_FPU(err);
@@ -305,33 +342,11 @@ static inline void copy_xregs_to_kernel(struct xregs_state *xstate)
 	u64 mask = -1;
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
-	int err = 0;
+	int err;
 
 	WARN_ON(!alternatives_patched);
 
-	/*
-	 * If xsaves is enabled, xsaves replaces xsaveopt because
-	 * it supports compact format and supervisor states in addition to
-	 * modified optimization in xsaveopt.
-	 *
-	 * Otherwise, if xsaveopt is enabled, xsaveopt replaces xsave
-	 * because xsaveopt supports modified optimization which is not
-	 * supported by xsave.
-	 *
-	 * If none of xsaves and xsaveopt is enabled, use xsave.
-	 */
-	alternative_input_2(
-		"1:"XSAVE,
-		XSAVEOPT,
-		X86_FEATURE_XSAVEOPT,
-		XSAVES,
-		X86_FEATURE_XSAVES,
-		[xstate] "D" (xstate), "a" (lmask), "d" (hmask) :
-		"memory");
-	asm volatile("2:\n\t"
-		     xstate_fault(err)
-		     : "0" (err)
-		     : "memory");
+	XSTATE_XSAVE(xstate, lmask, hmask, err);
 
 	/* We should never fault when copying to a kernel buffer: */
 	WARN_ON_FPU(err);
@@ -344,23 +359,9 @@ static inline void copy_kernel_to_xregs(struct xregs_state *xstate, u64 mask)
 {
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
-	int err = 0;
+	int err;
 
-	/*
-	 * Use xrstors to restore context if it is enabled. xrstors supports
-	 * compacted format of xsave area which is not supported by xrstor.
-	 */
-	alternative_input(
-		"1: " XRSTOR,
-		XRSTORS,
-		X86_FEATURE_XSAVES,
-		"D" (xstate), "m" (*xstate), "a" (lmask), "d" (hmask)
-		: "memory");
-
-	asm volatile("2:\n"
-		     xstate_fault(err)
-		     : "0" (err)
-		     : "memory");
+	XSTATE_XRESTORE(xstate, lmask, hmask, err);
 
 	/* We should never fault when copying from a kernel buffer: */
 	WARN_ON_FPU(err);
@@ -388,12 +389,10 @@ static inline int copy_xregs_to_user(struct xregs_state __user *buf)
 	if (unlikely(err))
 		return -EFAULT;
 
-	__asm__ __volatile__(ASM_STAC "\n"
-			     "1:"XSAVE"\n"
-			     "2: " ASM_CLAC "\n"
-			     xstate_fault(err)
-			     : "D" (buf), "a" (-1), "d" (-1), "0" (err)
-			     : "memory");
+	stac();
+	XSTATE_OP(XSAVE, buf, -1, -1, err);
+	clac();
+
 	return err;
 }
 
@@ -405,14 +404,12 @@ static inline int copy_user_to_xregs(struct xregs_state __user *buf, u64 mask)
 	struct xregs_state *xstate = ((__force struct xregs_state *)buf);
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
-	int err = 0;
-
-	__asm__ __volatile__(ASM_STAC "\n"
-			     "1:"XRSTOR"\n"
-			     "2: " ASM_CLAC "\n"
-			     xstate_fault(err)
-			     : "D" (xstate), "a" (lmask), "d" (hmask), "0" (err)
-			     : "memory");	/* memory required? */
+	int err;
+
+	stac();
+	XSTATE_OP(XRSTOR, xstate, lmask, hmask, err);
+	clac();
+
 	return err;
 }
 
@@ -466,7 +463,7 @@ static inline void copy_kernel_to_fpregs(union fpregs_state *fpstate)
 	 * pending. Clear the x87 state here by setting it to fixed values.
 	 * "m" is a random variable that should be in L1.
 	 */
-	if (unlikely(static_cpu_has_bug_safe(X86_BUG_FXSAVE_LEAK))) {
+	if (unlikely(static_cpu_has_bug(X86_BUG_FXSAVE_LEAK))) {
 		asm volatile(
 			"fnclex\n\t"
 			"emms\n\t"
@@ -595,7 +592,8 @@ switch_fpu_prepare(struct fpu *old_fpu, struct fpu *new_fpu, int cpu)
 	 * If the task has used the math, pre-load the FPU on xsave processors
 	 * or if the past 5 consecutive context-switches used math.
 	 */
-	fpu.preload = new_fpu->fpstate_active &&
+	fpu.preload = static_cpu_has(X86_FEATURE_FPU) &&
+		      new_fpu->fpstate_active &&
 		      (use_eager_fpu() || new_fpu->counter > 5);
 
 	if (old_fpu->fpregs_active) {
diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h
index 1c6f6ac52ad0..36b90bbfc69f 100644
--- a/arch/x86/include/asm/fpu/types.h
+++ b/arch/x86/include/asm/fpu/types.h
@@ -108,6 +108,8 @@ enum xfeature {
 	XFEATURE_OPMASK,
 	XFEATURE_ZMM_Hi256,
 	XFEATURE_Hi16_ZMM,
+	XFEATURE_PT_UNIMPLEMENTED_SO_FAR,
+	XFEATURE_PKRU,
 
 	XFEATURE_MAX,
 };
@@ -120,6 +122,7 @@ enum xfeature {
 #define XFEATURE_MASK_OPMASK		(1 << XFEATURE_OPMASK)
 #define XFEATURE_MASK_ZMM_Hi256		(1 << XFEATURE_ZMM_Hi256)
 #define XFEATURE_MASK_Hi16_ZMM		(1 << XFEATURE_Hi16_ZMM)
+#define XFEATURE_MASK_PKRU		(1 << XFEATURE_PKRU)
 
 #define XFEATURE_MASK_FPSSE		(XFEATURE_MASK_FP | XFEATURE_MASK_SSE)
 #define XFEATURE_MASK_AVX512		(XFEATURE_MASK_OPMASK \
@@ -212,6 +215,15 @@ struct avx_512_hi16_state {
 	struct reg_512_bit		hi16_zmm[16];
 } __packed;
 
+/*
+ * State component 9: 32-bit PKRU register.  The state is
+ * 8 bytes long but only 4 bytes is used currently.
+ */
+struct pkru_state {
+	u32				pkru;
+	u32				pad;
+} __packed;
+
 struct xstate_header {
 	u64				xfeatures;
 	u64				xcomp_bv;
diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
index 3a6c89b70307..38951b0fcc5a 100644
--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -22,9 +22,10 @@
 #define XFEATURE_MASK_LAZY	(XFEATURE_MASK_FP | \
 				 XFEATURE_MASK_SSE | \
 				 XFEATURE_MASK_YMM | \
-				 XFEATURE_MASK_OPMASK |	\
+				 XFEATURE_MASK_OPMASK | \
 				 XFEATURE_MASK_ZMM_Hi256 | \
-				 XFEATURE_MASK_Hi16_ZMM)
+				 XFEATURE_MASK_Hi16_ZMM	 | \
+				 XFEATURE_MASK_PKRU)
 
 /* Supported features which require eager state saving */
 #define XFEATURE_MASK_EAGER	(XFEATURE_MASK_BNDREGS | XFEATURE_MASK_BNDCSR)
diff --git a/arch/x86/include/asm/frame.h b/arch/x86/include/asm/frame.h
index 793179cf8e21..6e4d170726b7 100644
--- a/arch/x86/include/asm/frame.h
+++ b/arch/x86/include/asm/frame.h
@@ -1,23 +1,44 @@
-#ifdef __ASSEMBLY__
+#ifndef _ASM_X86_FRAME_H
+#define _ASM_X86_FRAME_H
 
 #include <asm/asm.h>
 
-/* The annotation hides the frame from the unwinder and makes it look
-   like a ordinary ebp save/restore. This avoids some special cases for
-   frame pointer later */
+/*
+ * These are stack frame creation macros.  They should be used by every
+ * callable non-leaf asm function to make kernel stack traces more reliable.
+ */
+
 #ifdef CONFIG_FRAME_POINTER
-	.macro FRAME
-	__ASM_SIZE(push,)	%__ASM_REG(bp)
-	__ASM_SIZE(mov)		%__ASM_REG(sp), %__ASM_REG(bp)
-	.endm
-	.macro ENDFRAME
-	__ASM_SIZE(pop,)	%__ASM_REG(bp)
-	.endm
-#else
-	.macro FRAME
-	.endm
-	.macro ENDFRAME
-	.endm
-#endif
-
-#endif  /*  __ASSEMBLY__  */
+
+#ifdef __ASSEMBLY__
+
+.macro FRAME_BEGIN
+	push %_ASM_BP
+	_ASM_MOV %_ASM_SP, %_ASM_BP
+.endm
+
+.macro FRAME_END
+	pop %_ASM_BP
+.endm
+
+#else /* !__ASSEMBLY__ */
+
+#define FRAME_BEGIN				\
+	"push %" _ASM_BP "\n"			\
+	_ASM_MOV "%" _ASM_SP ", %" _ASM_BP "\n"
+
+#define FRAME_END "pop %" _ASM_BP "\n"
+
+#endif /* __ASSEMBLY__ */
+
+#define FRAME_OFFSET __ASM_SEL(4, 8)
+
+#else /* !CONFIG_FRAME_POINTER */
+
+#define FRAME_BEGIN
+#define FRAME_END
+#define FRAME_OFFSET 0
+
+#endif /* CONFIG_FRAME_POINTER */
+
+#endif /* _ASM_X86_FRAME_H */
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h
index 24938852db30..a4820d4df617 100644
--- a/arch/x86/include/asm/ftrace.h
+++ b/arch/x86/include/asm/ftrace.h
@@ -52,13 +52,13 @@ int ftrace_int3_handler(struct pt_regs *regs);
  * this screws up the trace output when tracing a ia32 task.
  * Instead of reporting bogus syscalls, just do not trace them.
  *
- * If the user realy wants these, then they should use the
+ * If the user really wants these, then they should use the
  * raw syscall tracepoints with filtering.
  */
 #define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS 1
 static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs)
 {
-	if (is_compat_task())
+	if (in_compat_syscall())
 		return true;
 	return false;
 }
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/x86/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/x86/include/asm/highmem.h b/arch/x86/include/asm/highmem.h
index 04e9d023168f..1c0b43724ce3 100644
--- a/arch/x86/include/asm/highmem.h
+++ b/arch/x86/include/asm/highmem.h
@@ -68,7 +68,6 @@ void *kmap_atomic(struct page *page);
 void __kunmap_atomic(void *kvaddr);
 void *kmap_atomic_pfn(unsigned long pfn);
 void *kmap_atomic_prot_pfn(unsigned long pfn, pgprot_t prot);
-struct page *kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	do { } while (0)
 
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 1e3408e88604..b90e1053049b 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -130,12 +130,18 @@ struct irq_alloc_info {
 			char		*uv_name;
 		};
 #endif
+#if IS_ENABLED(CONFIG_VMD)
+		struct {
+			struct msi_desc *desc;
+		};
+#endif
 	};
 };
 
 struct irq_cfg {
 	unsigned int		dest_apicid;
 	u8			vector;
+	u8			old_vector;
 };
 
 extern struct irq_cfg *irq_cfg(unsigned int irq);
@@ -163,20 +169,6 @@ extern atomic_t irq_mis_count;
 
 extern void elcr_set_level_irq(unsigned int irq);
 
-/* SMP */
-extern __visible void smp_apic_timer_interrupt(struct pt_regs *);
-extern __visible void smp_spurious_interrupt(struct pt_regs *);
-extern __visible void smp_x86_platform_ipi(struct pt_regs *);
-extern __visible void smp_error_interrupt(struct pt_regs *);
-#ifdef CONFIG_X86_IO_APIC
-extern asmlinkage void smp_irq_move_cleanup_interrupt(void);
-#endif
-#ifdef CONFIG_SMP
-extern __visible void smp_reschedule_interrupt(struct pt_regs *);
-extern __visible void smp_call_function_interrupt(struct pt_regs *);
-extern __visible void smp_call_function_single_interrupt(struct pt_regs *);
-#endif
-
 extern char irq_entries_start[];
 #ifdef CONFIG_TRACING
 #define trace_irq_entries_start irq_entries_start
diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h
index ccffa53750a8..39bcefc20de7 100644
--- a/arch/x86/include/asm/i8259.h
+++ b/arch/x86/include/asm/i8259.h
@@ -60,6 +60,7 @@ struct legacy_pic {
 	void (*mask_all)(void);
 	void (*restore_mask)(void);
 	void (*init)(int auto_eoi);
+	int (*probe)(void);
 	int (*irq_pending)(unsigned int irq);
 	void (*make_irq)(unsigned int irq);
 };
diff --git a/arch/x86/include/asm/imr.h b/arch/x86/include/asm/imr.h
index cd2ce4068441..ebea2c9d2cdc 100644
--- a/arch/x86/include/asm/imr.h
+++ b/arch/x86/include/asm/imr.h
@@ -53,7 +53,7 @@
 #define IMR_MASK		(IMR_ALIGN - 1)
 
 int imr_add_range(phys_addr_t base, size_t size,
-		  unsigned int rmask, unsigned int wmask, bool lock);
+		  unsigned int rmask, unsigned int wmask);
 
 int imr_remove_range(phys_addr_t base, size_t size);
 
diff --git a/arch/x86/include/asm/intel_pt.h b/arch/x86/include/asm/intel_pt.h
new file mode 100644
index 000000000000..e1a411786bf5
--- /dev/null
+++ b/arch/x86/include/asm/intel_pt.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_X86_INTEL_PT_H
+#define _ASM_X86_INTEL_PT_H
+
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
+void cpu_emergency_stop_pt(void);
+#else
+static inline void cpu_emergency_stop_pt(void) {}
+#endif
+
+#endif /* _ASM_X86_INTEL_PT_H */
diff --git a/arch/x86/include/asm/intel_punit_ipc.h b/arch/x86/include/asm/intel_punit_ipc.h
new file mode 100644
index 000000000000..201eb9dce595
--- /dev/null
+++ b/arch/x86/include/asm/intel_punit_ipc.h
@@ -0,0 +1,101 @@
+#ifndef _ASM_X86_INTEL_PUNIT_IPC_H_
+#define  _ASM_X86_INTEL_PUNIT_IPC_H_
+
+/*
+ * Three types of 8bit P-Unit IPC commands are supported,
+ * bit[7:6]: [00]: BIOS; [01]: GTD; [10]: ISPD.
+ */
+typedef enum {
+	BIOS_IPC = 0,
+	GTDRIVER_IPC,
+	ISPDRIVER_IPC,
+	RESERVED_IPC,
+} IPC_TYPE;
+
+#define IPC_TYPE_OFFSET			6
+#define IPC_PUNIT_BIOS_CMD_BASE		(BIOS_IPC << IPC_TYPE_OFFSET)
+#define IPC_PUNIT_GTD_CMD_BASE		(GTDDRIVER_IPC << IPC_TYPE_OFFSET)
+#define IPC_PUNIT_ISPD_CMD_BASE		(ISPDRIVER_IPC << IPC_TYPE_OFFSET)
+#define IPC_PUNIT_CMD_TYPE_MASK		(RESERVED_IPC << IPC_TYPE_OFFSET)
+
+/* BIOS => Pcode commands */
+#define IPC_PUNIT_BIOS_ZERO			(IPC_PUNIT_BIOS_CMD_BASE | 0x00)
+#define IPC_PUNIT_BIOS_VR_INTERFACE		(IPC_PUNIT_BIOS_CMD_BASE | 0x01)
+#define IPC_PUNIT_BIOS_READ_PCS			(IPC_PUNIT_BIOS_CMD_BASE | 0x02)
+#define IPC_PUNIT_BIOS_WRITE_PCS		(IPC_PUNIT_BIOS_CMD_BASE | 0x03)
+#define IPC_PUNIT_BIOS_READ_PCU_CONFIG		(IPC_PUNIT_BIOS_CMD_BASE | 0x04)
+#define IPC_PUNIT_BIOS_WRITE_PCU_CONFIG		(IPC_PUNIT_BIOS_CMD_BASE | 0x05)
+#define IPC_PUNIT_BIOS_READ_PL1_SETTING		(IPC_PUNIT_BIOS_CMD_BASE | 0x06)
+#define IPC_PUNIT_BIOS_WRITE_PL1_SETTING	(IPC_PUNIT_BIOS_CMD_BASE | 0x07)
+#define IPC_PUNIT_BIOS_TRIGGER_VDD_RAM		(IPC_PUNIT_BIOS_CMD_BASE | 0x08)
+#define IPC_PUNIT_BIOS_READ_TELE_INFO		(IPC_PUNIT_BIOS_CMD_BASE | 0x09)
+#define IPC_PUNIT_BIOS_READ_TELE_TRACE_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0a)
+#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0b)
+#define IPC_PUNIT_BIOS_READ_TELE_EVENT_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0c)
+#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT_CTRL	(IPC_PUNIT_BIOS_CMD_BASE | 0x0d)
+#define IPC_PUNIT_BIOS_READ_TELE_TRACE		(IPC_PUNIT_BIOS_CMD_BASE | 0x0e)
+#define IPC_PUNIT_BIOS_WRITE_TELE_TRACE		(IPC_PUNIT_BIOS_CMD_BASE | 0x0f)
+#define IPC_PUNIT_BIOS_READ_TELE_EVENT		(IPC_PUNIT_BIOS_CMD_BASE | 0x10)
+#define IPC_PUNIT_BIOS_WRITE_TELE_EVENT		(IPC_PUNIT_BIOS_CMD_BASE | 0x11)
+#define IPC_PUNIT_BIOS_READ_MODULE_TEMP		(IPC_PUNIT_BIOS_CMD_BASE | 0x12)
+#define IPC_PUNIT_BIOS_RESERVED			(IPC_PUNIT_BIOS_CMD_BASE | 0x13)
+#define IPC_PUNIT_BIOS_READ_VOLTAGE_OVER	(IPC_PUNIT_BIOS_CMD_BASE | 0x14)
+#define IPC_PUNIT_BIOS_WRITE_VOLTAGE_OVER	(IPC_PUNIT_BIOS_CMD_BASE | 0x15)
+#define IPC_PUNIT_BIOS_READ_RATIO_OVER		(IPC_PUNIT_BIOS_CMD_BASE | 0x16)
+#define IPC_PUNIT_BIOS_WRITE_RATIO_OVER		(IPC_PUNIT_BIOS_CMD_BASE | 0x17)
+#define IPC_PUNIT_BIOS_READ_VF_GL_CTRL		(IPC_PUNIT_BIOS_CMD_BASE | 0x18)
+#define IPC_PUNIT_BIOS_WRITE_VF_GL_CTRL		(IPC_PUNIT_BIOS_CMD_BASE | 0x19)
+#define IPC_PUNIT_BIOS_READ_FM_SOC_TEMP_THRESH	(IPC_PUNIT_BIOS_CMD_BASE | 0x1a)
+#define IPC_PUNIT_BIOS_WRITE_FM_SOC_TEMP_THRESH	(IPC_PUNIT_BIOS_CMD_BASE | 0x1b)
+
+/* GT Driver => Pcode commands */
+#define IPC_PUNIT_GTD_ZERO			(IPC_PUNIT_GTD_CMD_BASE | 0x00)
+#define IPC_PUNIT_GTD_CONFIG			(IPC_PUNIT_GTD_CMD_BASE | 0x01)
+#define IPC_PUNIT_GTD_READ_ICCP_LIC_CDYN_SCAL	(IPC_PUNIT_GTD_CMD_BASE | 0x02)
+#define IPC_PUNIT_GTD_WRITE_ICCP_LIC_CDYN_SCAL	(IPC_PUNIT_GTD_CMD_BASE | 0x03)
+#define IPC_PUNIT_GTD_GET_WM_VAL		(IPC_PUNIT_GTD_CMD_BASE | 0x06)
+#define IPC_PUNIT_GTD_WRITE_CONFIG_WISHREQ	(IPC_PUNIT_GTD_CMD_BASE | 0x07)
+#define IPC_PUNIT_GTD_READ_REQ_DUTY_CYCLE	(IPC_PUNIT_GTD_CMD_BASE | 0x16)
+#define IPC_PUNIT_GTD_DIS_VOL_FREQ_CHG_REQUEST	(IPC_PUNIT_GTD_CMD_BASE | 0x17)
+#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_CTRL	(IPC_PUNIT_GTD_CMD_BASE | 0x1a)
+#define IPC_PUNIT_GTD_DYNA_DUTY_CYCLE_TUNING	(IPC_PUNIT_GTD_CMD_BASE | 0x1c)
+
+/* ISP Driver => Pcode commands */
+#define IPC_PUNIT_ISPD_ZERO			(IPC_PUNIT_ISPD_CMD_BASE | 0x00)
+#define IPC_PUNIT_ISPD_CONFIG			(IPC_PUNIT_ISPD_CMD_BASE | 0x01)
+#define IPC_PUNIT_ISPD_GET_ISP_LTR_VAL		(IPC_PUNIT_ISPD_CMD_BASE | 0x02)
+#define IPC_PUNIT_ISPD_ACCESS_IU_FREQ_BOUNDS	(IPC_PUNIT_ISPD_CMD_BASE | 0x03)
+#define IPC_PUNIT_ISPD_READ_CDYN_LEVEL		(IPC_PUNIT_ISPD_CMD_BASE | 0x04)
+#define IPC_PUNIT_ISPD_WRITE_CDYN_LEVEL		(IPC_PUNIT_ISPD_CMD_BASE | 0x05)
+
+/* Error codes */
+#define IPC_PUNIT_ERR_SUCCESS			0
+#define IPC_PUNIT_ERR_INVALID_CMD		1
+#define IPC_PUNIT_ERR_INVALID_PARAMETER		2
+#define IPC_PUNIT_ERR_CMD_TIMEOUT		3
+#define IPC_PUNIT_ERR_CMD_LOCKED		4
+#define IPC_PUNIT_ERR_INVALID_VR_ID		5
+#define IPC_PUNIT_ERR_VR_ERR			6
+
+#if IS_ENABLED(CONFIG_INTEL_PUNIT_IPC)
+
+int intel_punit_ipc_simple_command(int cmd, int para1, int para2);
+int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out);
+
+#else
+
+static inline int intel_punit_ipc_simple_command(int cmd,
+						  int para1, int para2)
+{
+	return -ENODEV;
+}
+
+static inline int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2,
+					  u32 *in, u32 *out)
+{
+	return -ENODEV;
+}
+
+#endif /* CONFIG_INTEL_PUNIT_IPC */
+
+#endif
diff --git a/arch/x86/include/asm/intel_telemetry.h b/arch/x86/include/asm/intel_telemetry.h
new file mode 100644
index 000000000000..ed65fe701de5
--- /dev/null
+++ b/arch/x86/include/asm/intel_telemetry.h
@@ -0,0 +1,147 @@
+/*
+ * Intel SOC Telemetry Driver Header File
+ * Copyright (C) 2015, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+#ifndef INTEL_TELEMETRY_H
+#define INTEL_TELEMETRY_H
+
+#define TELEM_MAX_EVENTS_SRAM		28
+#define TELEM_MAX_OS_ALLOCATED_EVENTS	20
+
+enum telemetry_unit {
+	TELEM_PSS = 0,
+	TELEM_IOSS,
+	TELEM_UNIT_NONE
+};
+
+struct telemetry_evtlog {
+	u32 telem_evtid;
+	u64 telem_evtlog;
+};
+
+struct telemetry_evtconfig {
+	/* Array of Event-IDs to Enable */
+	u32 *evtmap;
+
+	/* Number of Events (<29) in evtmap */
+	u8 num_evts;
+
+	/* Sampling period */
+	u8 period;
+};
+
+struct telemetry_evtmap {
+	const char *name;
+	u32 evt_id;
+};
+
+struct telemetry_unit_config {
+	struct telemetry_evtmap *telem_evts;
+	void __iomem *regmap;
+	u32 ssram_base_addr;
+	u8 ssram_evts_used;
+	u8 curr_period;
+	u8 max_period;
+	u8 min_period;
+	u32 ssram_size;
+
+};
+
+struct telemetry_plt_config {
+	struct telemetry_unit_config pss_config;
+	struct telemetry_unit_config ioss_config;
+	struct mutex telem_trace_lock;
+	struct mutex telem_lock;
+	bool telem_in_use;
+};
+
+struct telemetry_core_ops {
+	int (*get_sampling_period)(u8 *pss_min_period, u8 *pss_max_period,
+				   u8 *ioss_min_period, u8 *ioss_max_period);
+
+	int (*get_eventconfig)(struct telemetry_evtconfig *pss_evtconfig,
+			       struct telemetry_evtconfig *ioss_evtconfig,
+			       int pss_len, int ioss_len);
+
+	int (*update_events)(struct telemetry_evtconfig pss_evtconfig,
+			     struct telemetry_evtconfig ioss_evtconfig);
+
+	int (*set_sampling_period)(u8 pss_period, u8 ioss_period);
+
+	int (*get_trace_verbosity)(enum telemetry_unit telem_unit,
+				   u32 *verbosity);
+
+	int (*set_trace_verbosity)(enum telemetry_unit telem_unit,
+				   u32 verbosity);
+
+	int (*raw_read_eventlog)(enum telemetry_unit telem_unit,
+				 struct telemetry_evtlog *evtlog,
+				 int len, int log_all_evts);
+
+	int (*read_eventlog)(enum telemetry_unit telem_unit,
+			     struct telemetry_evtlog *evtlog,
+			     int len, int log_all_evts);
+
+	int (*add_events)(u8 num_pss_evts, u8 num_ioss_evts,
+			  u32 *pss_evtmap, u32 *ioss_evtmap);
+
+	int (*reset_events)(void);
+};
+
+int telemetry_set_pltdata(struct telemetry_core_ops *ops,
+			  struct telemetry_plt_config *pltconfig);
+
+int telemetry_clear_pltdata(void);
+
+int telemetry_pltconfig_valid(void);
+
+int telemetry_get_evtname(enum telemetry_unit telem_unit,
+			  const char **name, int len);
+
+int telemetry_update_events(struct telemetry_evtconfig pss_evtconfig,
+			    struct telemetry_evtconfig ioss_evtconfig);
+
+int telemetry_add_events(u8 num_pss_evts, u8 num_ioss_evts,
+			 u32 *pss_evtmap, u32 *ioss_evtmap);
+
+int telemetry_reset_events(void);
+
+int telemetry_get_eventconfig(struct telemetry_evtconfig *pss_config,
+			      struct telemetry_evtconfig *ioss_config,
+			      int pss_len, int ioss_len);
+
+int telemetry_read_events(enum telemetry_unit telem_unit,
+			  struct telemetry_evtlog *evtlog, int len);
+
+int telemetry_raw_read_events(enum telemetry_unit telem_unit,
+			      struct telemetry_evtlog *evtlog, int len);
+
+int telemetry_read_eventlog(enum telemetry_unit telem_unit,
+			    struct telemetry_evtlog *evtlog, int len);
+
+int telemetry_raw_read_eventlog(enum telemetry_unit telem_unit,
+				struct telemetry_evtlog *evtlog, int len);
+
+int telemetry_get_sampling_period(u8 *pss_min_period, u8 *pss_max_period,
+				  u8 *ioss_min_period, u8 *ioss_max_period);
+
+int telemetry_set_sampling_period(u8 pss_period, u8 ioss_period);
+
+int telemetry_set_trace_verbosity(enum telemetry_unit telem_unit,
+				  u32 verbosity);
+
+int telemetry_get_trace_verbosity(enum telemetry_unit telem_unit,
+				  u32 *verbosity);
+
+#endif /* INTEL_TELEMETRY_H */
diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h
index b72ad0faa6c5..b41ee164930a 100644
--- a/arch/x86/include/asm/iosf_mbi.h
+++ b/arch/x86/include/asm/iosf_mbi.h
@@ -1,5 +1,5 @@
 /*
- * iosf_mbi.h: Intel OnChip System Fabric MailBox access support
+ * Intel OnChip System Fabric MailBox access support
  */
 
 #ifndef IOSF_MBI_SYMS_H
@@ -16,6 +16,18 @@
 #define MBI_MASK_LO		0x000000FF
 #define MBI_ENABLE		0xF0
 
+/* IOSF SB read/write opcodes */
+#define MBI_MMIO_READ		0x00
+#define MBI_MMIO_WRITE		0x01
+#define MBI_CFG_READ		0x04
+#define MBI_CFG_WRITE		0x05
+#define MBI_CR_READ		0x06
+#define MBI_CR_WRITE		0x07
+#define MBI_REG_READ		0x10
+#define MBI_REG_WRITE		0x11
+#define MBI_ESRAM_READ		0x12
+#define MBI_ESRAM_WRITE		0x13
+
 /* Baytrail available units */
 #define BT_MBI_UNIT_AUNIT	0x00
 #define BT_MBI_UNIT_SMC		0x01
@@ -28,50 +40,13 @@
 #define BT_MBI_UNIT_SATA	0xA3
 #define BT_MBI_UNIT_PCIE	0xA6
 
-/* Baytrail read/write opcodes */
-#define BT_MBI_AUNIT_READ	0x10
-#define BT_MBI_AUNIT_WRITE	0x11
-#define BT_MBI_SMC_READ		0x10
-#define BT_MBI_SMC_WRITE	0x11
-#define BT_MBI_CPU_READ		0x10
-#define BT_MBI_CPU_WRITE	0x11
-#define BT_MBI_BUNIT_READ	0x10
-#define BT_MBI_BUNIT_WRITE	0x11
-#define BT_MBI_PMC_READ		0x06
-#define BT_MBI_PMC_WRITE	0x07
-#define BT_MBI_GFX_READ		0x00
-#define BT_MBI_GFX_WRITE	0x01
-#define BT_MBI_SMIO_READ	0x06
-#define BT_MBI_SMIO_WRITE	0x07
-#define BT_MBI_USB_READ		0x06
-#define BT_MBI_USB_WRITE	0x07
-#define BT_MBI_SATA_READ	0x00
-#define BT_MBI_SATA_WRITE	0x01
-#define BT_MBI_PCIE_READ	0x00
-#define BT_MBI_PCIE_WRITE	0x01
-
 /* Quark available units */
 #define QRK_MBI_UNIT_HBA	0x00
 #define QRK_MBI_UNIT_HB		0x03
 #define QRK_MBI_UNIT_RMU	0x04
 #define QRK_MBI_UNIT_MM		0x05
-#define QRK_MBI_UNIT_MMESRAM	0x05
 #define QRK_MBI_UNIT_SOC	0x31
 
-/* Quark read/write opcodes */
-#define QRK_MBI_HBA_READ	0x10
-#define QRK_MBI_HBA_WRITE	0x11
-#define QRK_MBI_HB_READ		0x10
-#define QRK_MBI_HB_WRITE	0x11
-#define QRK_MBI_RMU_READ	0x10
-#define QRK_MBI_RMU_WRITE	0x11
-#define QRK_MBI_MM_READ		0x10
-#define QRK_MBI_MM_WRITE	0x11
-#define QRK_MBI_MMESRAM_READ	0x12
-#define QRK_MBI_MMESRAM_WRITE	0x13
-#define QRK_MBI_SOC_READ	0x06
-#define QRK_MBI_SOC_WRITE	0x07
-
 #if IS_ENABLED(CONFIG_IOSF_MBI)
 
 bool iosf_mbi_available(void);
diff --git a/arch/x86/include/asm/ipi.h b/arch/x86/include/asm/ipi.h
index 615fa9061b57..a4fe16e42b7b 100644
--- a/arch/x86/include/asm/ipi.h
+++ b/arch/x86/include/asm/ipi.h
@@ -57,68 +57,16 @@ static inline void __xapic_wait_icr_idle(void)
 		cpu_relax();
 }
 
-static inline void
-__default_send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest)
-{
-	/*
-	 * Subtle. In the case of the 'never do double writes' workaround
-	 * we have to lock out interrupts to be safe.  As we don't care
-	 * of the value read we use an atomic rmw access to avoid costly
-	 * cli/sti.  Otherwise we use an even cheaper single atomic write
-	 * to the APIC.
-	 */
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	__xapic_wait_icr_idle();
-
-	/*
-	 * No need to touch the target chip field
-	 */
-	cfg = __prepare_ICR(shortcut, vector, dest);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	native_apic_mem_write(APIC_ICR, cfg);
-}
+void __default_send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest);
 
 /*
  * This is used to send an IPI with no shorthand notation (the destination is
  * specified in bits 56 to 63 of the ICR).
  */
-static inline void
- __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest)
-{
-	unsigned long cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	if (unlikely(vector == NMI_VECTOR))
-		safe_apic_wait_icr_idle();
-	else
-		__xapic_wait_icr_idle();
-
-	/*
-	 * prepare target chip field
-	 */
-	cfg = __prepare_ICR2(mask);
-	native_apic_mem_write(APIC_ICR2, cfg);
-
-	/*
-	 * program the ICR
-	 */
-	cfg = __prepare_ICR(0, vector, dest);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	native_apic_mem_write(APIC_ICR, cfg);
-}
+void __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest);
 
+extern void default_send_IPI_single(int cpu, int vector);
+extern void default_send_IPI_single_phys(int cpu, int vector);
 extern void default_send_IPI_mask_sequence_phys(const struct cpumask *mask,
 						 int vector);
 extern void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 881b4768644a..e7de5c9a4fbd 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -23,11 +23,13 @@ extern void irq_ctx_init(int cpu);
 
 #define __ARCH_HAS_DO_SOFTIRQ
 
+struct irq_desc;
+
 #ifdef CONFIG_HOTPLUG_CPU
 #include <linux/cpumask.h>
 extern int check_irq_vectors_for_cpu_disable(void);
 extern void fixup_irqs(void);
-extern void irq_force_complete_move(int);
+extern void irq_force_complete_move(struct irq_desc *desc);
 #endif
 
 #ifdef CONFIG_HAVE_KVM
@@ -37,7 +39,6 @@ extern void kvm_set_posted_intr_wakeup_handler(void (*handler)(void));
 extern void (*x86_platform_ipi_callback)(void);
 extern void native_init_IRQ(void);
 
-struct irq_desc;
 extern bool handle_irq(struct irq_desc *desc, struct pt_regs *regs);
 
 extern __visible unsigned int do_IRQ(struct pt_regs *regs);
diff --git a/arch/x86/include/asm/irq_work.h b/arch/x86/include/asm/irq_work.h
index 78162f8e248b..d0afb05c84fc 100644
--- a/arch/x86/include/asm/irq_work.h
+++ b/arch/x86/include/asm/irq_work.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_IRQ_WORK_H
 #define _ASM_IRQ_WORK_H
 
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 
 static inline bool arch_irq_work_has_interrupt(void)
 {
diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h
index 5daeca3d0f9e..adc54c12cbd1 100644
--- a/arch/x86/include/asm/jump_label.h
+++ b/arch/x86/include/asm/jump_label.h
@@ -1,12 +1,18 @@
 #ifndef _ASM_X86_JUMP_LABEL_H
 #define _ASM_X86_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
-
-#include <linux/stringify.h>
-#include <linux/types.h>
-#include <asm/nops.h>
-#include <asm/asm.h>
+#ifndef HAVE_JUMP_LABEL
+/*
+ * For better or for worse, if jump labels (the gcc extension) are missing,
+ * then the entire static branch patching infrastructure is compiled out.
+ * If that happens, the code in here will malfunction.  Raise a compiler
+ * error instead.
+ *
+ * In theory, jump labels and the static branch patching infrastructure
+ * could be decoupled to fix this.
+ */
+#error asm/jump_label.h included on a non-jump-label kernel
+#endif
 
 #define JUMP_LABEL_NOP_SIZE 5
 
@@ -16,6 +22,14 @@
 # define STATIC_KEY_INIT_NOP GENERIC_NOP5_ATOMIC
 #endif
 
+#include <asm/asm.h>
+#include <asm/nops.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+
 static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
 {
 	asm_volatile_goto("1:"
@@ -59,5 +73,40 @@ struct jump_entry {
 	jump_label_t key;
 };
 
-#endif  /* __ASSEMBLY__ */
+#else	/* __ASSEMBLY__ */
+
+.macro STATIC_JUMP_IF_TRUE target, key, def
+.Lstatic_jump_\@:
+	.if \def
+	/* Equivalent to "jmp.d32 \target" */
+	.byte		0xe9
+	.long		\target - .Lstatic_jump_after_\@
+.Lstatic_jump_after_\@:
+	.else
+	.byte		STATIC_KEY_INIT_NOP
+	.endif
+	.pushsection __jump_table, "aw"
+	_ASM_ALIGN
+	_ASM_PTR	.Lstatic_jump_\@, \target, \key
+	.popsection
+.endm
+
+.macro STATIC_JUMP_IF_FALSE target, key, def
+.Lstatic_jump_\@:
+	.if \def
+	.byte		STATIC_KEY_INIT_NOP
+	.else
+	/* Equivalent to "jmp.d32 \target" */
+	.byte		0xe9
+	.long		\target - .Lstatic_jump_after_\@
+.Lstatic_jump_after_\@:
+	.endif
+	.pushsection __jump_table, "aw"
+	_ASM_ALIGN
+	_ASM_PTR	.Lstatic_jump_\@, \target, \key + 1
+	.popsection
+.endm
+
+#endif	/* __ASSEMBLY__ */
+
 #endif
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 9265196e877f..b7e394485a5f 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -25,12 +25,14 @@
 #include <linux/pvclock_gtod.h>
 #include <linux/clocksource.h>
 #include <linux/irqbypass.h>
+#include <linux/hyperv.h>
 
 #include <asm/pvclock-abi.h>
 #include <asm/desc.h>
 #include <asm/mtrr.h>
 #include <asm/msr-index.h>
 #include <asm/asm.h>
+#include <asm/kvm_page_track.h>
 
 #define KVM_MAX_VCPUS 255
 #define KVM_SOFT_MAX_VCPUS 160
@@ -41,10 +43,35 @@
 
 #define KVM_PIO_PAGE_OFFSET 1
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 2
-#define KVM_HALT_POLL_NS_DEFAULT 500000
+#define KVM_HALT_POLL_NS_DEFAULT 400000
 
 #define KVM_IRQCHIP_NUM_PINS  KVM_IOAPIC_NUM_PINS
 
+/* x86-specific vcpu->requests bit members */
+#define KVM_REQ_MIGRATE_TIMER      8
+#define KVM_REQ_REPORT_TPR_ACCESS  9
+#define KVM_REQ_TRIPLE_FAULT      10
+#define KVM_REQ_MMU_SYNC          11
+#define KVM_REQ_CLOCK_UPDATE      12
+#define KVM_REQ_DEACTIVATE_FPU    13
+#define KVM_REQ_EVENT             14
+#define KVM_REQ_APF_HALT          15
+#define KVM_REQ_STEAL_UPDATE      16
+#define KVM_REQ_NMI               17
+#define KVM_REQ_PMU               18
+#define KVM_REQ_PMI               19
+#define KVM_REQ_SMI               20
+#define KVM_REQ_MASTERCLOCK_UPDATE 21
+#define KVM_REQ_MCLOCK_INPROGRESS 22
+#define KVM_REQ_SCAN_IOAPIC       23
+#define KVM_REQ_GLOBAL_CLOCK_UPDATE 24
+#define KVM_REQ_APIC_PAGE_RELOAD  25
+#define KVM_REQ_HV_CRASH          26
+#define KVM_REQ_IOAPIC_EOI_EXIT   27
+#define KVM_REQ_HV_RESET          28
+#define KVM_REQ_HV_EXIT           29
+#define KVM_REQ_HV_STIMER         30
+
 #define CR0_RESERVED_BITS                                               \
 	(~(unsigned long)(X86_CR0_PE | X86_CR0_MP | X86_CR0_EM | X86_CR0_TS \
 			  | X86_CR0_ET | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM \
@@ -57,7 +84,8 @@
 			  | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_MCE     \
 			  | X86_CR4_PGE | X86_CR4_PCE | X86_CR4_OSFXSR | X86_CR4_PCIDE \
 			  | X86_CR4_OSXSAVE | X86_CR4_SMEP | X86_CR4_FSGSBASE \
-			  | X86_CR4_OSXMMEXCPT | X86_CR4_VMXE | X86_CR4_SMAP))
+			  | X86_CR4_OSXMMEXCPT | X86_CR4_VMXE | X86_CR4_SMAP \
+			  | X86_CR4_PKE))
 
 #define CR8_RESERVED_BITS (~(unsigned long)X86_CR8_TPR)
 
@@ -160,12 +188,14 @@ enum {
 #define PFERR_USER_BIT 2
 #define PFERR_RSVD_BIT 3
 #define PFERR_FETCH_BIT 4
+#define PFERR_PK_BIT 5
 
 #define PFERR_PRESENT_MASK (1U << PFERR_PRESENT_BIT)
 #define PFERR_WRITE_MASK (1U << PFERR_WRITE_BIT)
 #define PFERR_USER_MASK (1U << PFERR_USER_BIT)
 #define PFERR_RSVD_MASK (1U << PFERR_RSVD_BIT)
 #define PFERR_FETCH_MASK (1U << PFERR_FETCH_BIT)
+#define PFERR_PK_MASK (1U << PFERR_PK_BIT)
 
 /* apic attention bits */
 #define KVM_APIC_CHECK_VAPIC	0
@@ -188,6 +218,14 @@ struct kvm_mmu_memory_cache {
 	void *objects[KVM_NR_MEM_OBJS];
 };
 
+/*
+ * the pages used as guest page table on soft mmu are tracked by
+ * kvm_memory_slot.arch.gfn_track which is 16 bits, so the role bits used
+ * by indirect shadow page can not be more than 15 bits.
+ *
+ * Currently, we used 14 bits that are @level, @cr4_pae, @quadrant, @access,
+ * @nxe, @cr0_wp, @smep_andnot_wp and @smap_andnot_wp.
+ */
 union kvm_mmu_page_role {
 	unsigned word;
 	struct {
@@ -213,6 +251,10 @@ union kvm_mmu_page_role {
 	};
 };
 
+struct kvm_rmap_head {
+	unsigned long val;
+};
+
 struct kvm_mmu_page {
 	struct list_head link;
 	struct hlist_node hash_link;
@@ -230,7 +272,7 @@ struct kvm_mmu_page {
 	bool unsync;
 	int root_count;          /* Currently serving as active root */
 	unsigned int unsync_children;
-	unsigned long parent_ptes;	/* Reverse mapping for parent_pte */
+	struct kvm_rmap_head parent_ptes; /* rmap pointers to parent sptes */
 
 	/* The page is obsolete if mmu_valid_gen != kvm->arch.mmu_valid_gen.  */
 	unsigned long mmu_valid_gen;
@@ -246,7 +288,7 @@ struct kvm_mmu_page {
 #endif
 
 	/* Number of writes since the last time traversal visited this page.  */
-	int write_flooding_count;
+	atomic_t write_flooding_count;
 };
 
 struct kvm_pio_request {
@@ -296,6 +338,14 @@ struct kvm_mmu {
 	 */
 	u8 permissions[16];
 
+	/*
+	* The pkru_mask indicates if protection key checks are needed.  It
+	* consists of 16 domains indexed by page fault error code bits [4:1],
+	* with PFEC.RSVD replaced by ACC_USER_MASK from the page tables.
+	* Each domain has 2 bits which are ANDed with AD and WD from PKRU.
+	*/
+	u32 pkru_mask;
+
 	u64 *pae_root;
 	u64 *lm_root;
 
@@ -308,12 +358,8 @@ struct kvm_mmu {
 
 	struct rsvd_bits_validate guest_rsvd_check;
 
-	/*
-	 * Bitmap: bit set = last pte in walk
-	 * index[0:1]: level (zero-based)
-	 * index[2]: pte.ps
-	 */
-	u8 last_pte_bitmap;
+	/* Can have large pages at levels 2..last_nonleaf_level-1. */
+	u8 last_nonleaf_level;
 
 	bool nx;
 
@@ -374,10 +420,38 @@ struct kvm_mtrr {
 	struct list_head head;
 };
 
+/* Hyper-V SynIC timer */
+struct kvm_vcpu_hv_stimer {
+	struct hrtimer timer;
+	int index;
+	u64 config;
+	u64 count;
+	u64 exp_time;
+	struct hv_message msg;
+	bool msg_pending;
+};
+
+/* Hyper-V synthetic interrupt controller (SynIC)*/
+struct kvm_vcpu_hv_synic {
+	u64 version;
+	u64 control;
+	u64 msg_page;
+	u64 evt_page;
+	atomic64_t sint[HV_SYNIC_SINT_COUNT];
+	atomic_t sint_to_gsi[HV_SYNIC_SINT_COUNT];
+	DECLARE_BITMAP(auto_eoi_bitmap, 256);
+	DECLARE_BITMAP(vec_bitmap, 256);
+	bool active;
+};
+
 /* Hyper-V per vcpu emulation context */
 struct kvm_vcpu_hv {
 	u64 hv_vapic;
 	s64 runtime_offset;
+	struct kvm_vcpu_hv_synic synic;
+	struct kvm_hyperv_exit exit;
+	struct kvm_vcpu_hv_stimer stimer[HV_SYNIC_STIMER_COUNT];
+	DECLARE_BITMAP(stimer_pending_bitmap, HV_SYNIC_STIMER_COUNT);
 };
 
 struct kvm_vcpu_arch {
@@ -400,7 +474,8 @@ struct kvm_vcpu_arch {
 	u64 efer;
 	u64 apic_base;
 	struct kvm_lapic *apic;    /* kernel irqchip context */
-	u64 eoi_exit_bitmap[4];
+	bool apicv_active;
+	DECLARE_BITMAP(ioapic_handled_vectors, 256);
 	unsigned long apic_attention;
 	int32_t apic_arb_prio;
 	int mp_state;
@@ -439,7 +514,6 @@ struct kvm_vcpu_arch {
 	struct kvm_mmu_memory_cache mmu_page_header_cache;
 
 	struct fpu guest_fpu;
-	bool eager_fpu;
 	u64 xcr0;
 	u64 guest_supported_xcr0;
 	u32 guest_xstate_size;
@@ -505,6 +579,7 @@ struct kvm_vcpu_arch {
 	u32 virtual_tsc_mult;
 	u32 virtual_tsc_khz;
 	s64 ia32_tsc_adjust_msr;
+	u64 tsc_scaling_ratio;
 
 	atomic_t nmi_queued;  /* unprocessed asynchronous NMIs */
 	unsigned nmi_pending; /* NMI queued after currently running handler */
@@ -584,12 +659,13 @@ struct kvm_vcpu_arch {
 };
 
 struct kvm_lpage_info {
-	int write_count;
+	int disallow_lpage;
 };
 
 struct kvm_arch_memory_slot {
-	unsigned long *rmap[KVM_NR_PAGE_SIZES];
+	struct kvm_rmap_head *rmap[KVM_NR_PAGE_SIZES];
 	struct kvm_lpage_info *lpage_info[KVM_NR_PAGE_SIZES - 1];
+	unsigned short *gfn_track[KVM_PAGE_TRACK_MAX];
 };
 
 /*
@@ -634,6 +710,8 @@ struct kvm_arch {
 	 */
 	struct list_head active_mmu_pages;
 	struct list_head zapped_obsolete_pages;
+	struct kvm_page_track_notifier_node mmu_sp_tracker;
+	struct kvm_page_track_notifier_head track_notifier_head;
 
 	struct list_head assigned_dev_head;
 	struct iommu_domain *iommu_domain;
@@ -694,6 +772,8 @@ struct kvm_arch {
 
 	bool irqchip_split;
 	u8 nr_reserved_ioapic_pins;
+
+	bool disabled_lapic_found;
 };
 
 struct kvm_vm_stat {
@@ -777,7 +857,7 @@ struct kvm_x86_ops {
 	void (*vcpu_load)(struct kvm_vcpu *vcpu, int cpu);
 	void (*vcpu_put)(struct kvm_vcpu *vcpu);
 
-	void (*update_db_bp_intercept)(struct kvm_vcpu *vcpu);
+	void (*update_bp_intercept)(struct kvm_vcpu *vcpu);
 	int (*get_msr)(struct kvm_vcpu *vcpu, struct msr_data *msr);
 	int (*set_msr)(struct kvm_vcpu *vcpu, struct msr_data *msr);
 	u64 (*get_segment_base)(struct kvm_vcpu *vcpu, int seg);
@@ -805,6 +885,7 @@ struct kvm_x86_ops {
 	void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg);
 	unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
 	void (*set_rflags)(struct kvm_vcpu *vcpu, unsigned long rflags);
+	u32 (*get_pkru)(struct kvm_vcpu *vcpu);
 	void (*fpu_activate)(struct kvm_vcpu *vcpu);
 	void (*fpu_deactivate)(struct kvm_vcpu *vcpu);
 
@@ -830,10 +911,11 @@ struct kvm_x86_ops {
 	void (*enable_nmi_window)(struct kvm_vcpu *vcpu);
 	void (*enable_irq_window)(struct kvm_vcpu *vcpu);
 	void (*update_cr8_intercept)(struct kvm_vcpu *vcpu, int tpr, int irr);
-	int (*cpu_uses_apicv)(struct kvm_vcpu *vcpu);
+	bool (*get_enable_apicv)(void);
+	void (*refresh_apicv_exec_ctrl)(struct kvm_vcpu *vcpu);
 	void (*hwapic_irr_update)(struct kvm_vcpu *vcpu, int max_irr);
 	void (*hwapic_isr_update)(struct kvm *kvm, int isr);
-	void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu);
+	void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
 	void (*set_virtual_x2apic_mode)(struct kvm_vcpu *vcpu, bool set);
 	void (*set_apic_access_page_addr)(struct kvm_vcpu *vcpu, hpa_t hpa);
 	void (*deliver_posted_interrupt)(struct kvm_vcpu *vcpu, int vector);
@@ -844,7 +926,7 @@ struct kvm_x86_ops {
 	int (*get_lpage_level)(void);
 	bool (*rdtscp_supported)(void);
 	bool (*invpcid_supported)(void);
-	void (*adjust_tsc_offset)(struct kvm_vcpu *vcpu, s64 adjustment, bool host);
+	void (*adjust_tsc_offset_guest)(struct kvm_vcpu *vcpu, s64 adjustment);
 
 	void (*set_tdp_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3);
 
@@ -852,11 +934,9 @@ struct kvm_x86_ops {
 
 	bool (*has_wbinvd_exit)(void);
 
-	void (*set_tsc_khz)(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale);
 	u64 (*read_tsc_offset)(struct kvm_vcpu *vcpu);
 	void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset);
 
-	u64 (*compute_tsc_offset)(struct kvm_vcpu *vcpu, u64 target_tsc);
 	u64 (*read_l1_tsc)(struct kvm_vcpu *vcpu, u64 host_tsc);
 
 	void (*get_exit_info)(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2);
@@ -923,23 +1003,14 @@ struct kvm_arch_async_pf {
 
 extern struct kvm_x86_ops *kvm_x86_ops;
 
-static inline void adjust_tsc_offset_guest(struct kvm_vcpu *vcpu,
-					   s64 adjustment)
-{
-	kvm_x86_ops->adjust_tsc_offset(vcpu, adjustment, false);
-}
-
-static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment)
-{
-	kvm_x86_ops->adjust_tsc_offset(vcpu, adjustment, true);
-}
-
 int kvm_mmu_module_init(void);
 void kvm_mmu_module_exit(void);
 
 void kvm_mmu_destroy(struct kvm_vcpu *vcpu);
 int kvm_mmu_create(struct kvm_vcpu *vcpu);
 void kvm_mmu_setup(struct kvm_vcpu *vcpu);
+void kvm_mmu_init_vm(struct kvm *kvm);
+void kvm_mmu_uninit_vm(struct kvm *kvm);
 void kvm_mmu_set_mask_ptes(u64 user_mask, u64 accessed_mask,
 		u64 dirty_mask, u64 nx_mask, u64 x_mask);
 
@@ -986,10 +1057,12 @@ u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu);
 
 /* control of guest tsc rate supported? */
 extern bool kvm_has_tsc_control;
-/* minimum supported tsc_khz for guests */
-extern u32  kvm_min_guest_tsc_khz;
 /* maximum supported tsc_khz for guests */
 extern u32  kvm_max_guest_tsc_khz;
+/* number of bits of the fractional part of the TSC scaling ratio */
+extern u8   kvm_tsc_scaling_ratio_frac_bits;
+/* maximum allowed value of TSC scaling ratio */
+extern u64  kvm_max_tsc_scaling_ratio;
 
 enum emulation_result {
 	EMULATE_DONE,         /* no further processing */
@@ -1077,8 +1150,6 @@ void kvm_pic_clear_all(struct kvm_pic *pic, int irq_source_id);
 
 void kvm_inject_nmi(struct kvm_vcpu *vcpu);
 
-void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
-		       const u8 *new, int bytes);
 int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn);
 int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva);
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu);
@@ -1096,6 +1167,8 @@ gpa_t kvm_mmu_gva_to_gpa_write(struct kvm_vcpu *vcpu, gva_t gva,
 gpa_t kvm_mmu_gva_to_gpa_system(struct kvm_vcpu *vcpu, gva_t gva,
 				struct x86_exception *exception);
 
+void kvm_vcpu_deactivate_apicv(struct kvm_vcpu *vcpu);
+
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
 
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t gva, u32 error_code,
@@ -1235,9 +1308,15 @@ void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm,
 void kvm_define_shared_msr(unsigned index, u32 msr);
 int kvm_set_shared_msr(unsigned index, u64 val, u64 mask);
 
+u64 kvm_scale_tsc(struct kvm_vcpu *vcpu, u64 tsc);
+u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc);
+
 unsigned long kvm_get_linear_rip(struct kvm_vcpu *vcpu);
 bool kvm_is_linear_rip(struct kvm_vcpu *vcpu, unsigned long linear_rip);
 
+void kvm_make_mclock_inprogress_request(struct kvm *kvm);
+void kvm_make_scan_ioapic_request(struct kvm *kvm);
+
 void kvm_arch_async_page_not_present(struct kvm_vcpu *vcpu,
 				     struct kvm_async_pf *work);
 void kvm_arch_async_page_present(struct kvm_vcpu *vcpu,
diff --git a/arch/x86/include/asm/kvm_page_track.h b/arch/x86/include/asm/kvm_page_track.h
new file mode 100644
index 000000000000..c2b8d24a235c
--- /dev/null
+++ b/arch/x86/include/asm/kvm_page_track.h
@@ -0,0 +1,61 @@
+#ifndef _ASM_X86_KVM_PAGE_TRACK_H
+#define _ASM_X86_KVM_PAGE_TRACK_H
+
+enum kvm_page_track_mode {
+	KVM_PAGE_TRACK_WRITE,
+	KVM_PAGE_TRACK_MAX,
+};
+
+/*
+ * The notifier represented by @kvm_page_track_notifier_node is linked into
+ * the head which will be notified when guest is triggering the track event.
+ *
+ * Write access on the head is protected by kvm->mmu_lock, read access
+ * is protected by track_srcu.
+ */
+struct kvm_page_track_notifier_head {
+	struct srcu_struct track_srcu;
+	struct hlist_head track_notifier_list;
+};
+
+struct kvm_page_track_notifier_node {
+	struct hlist_node node;
+
+	/*
+	 * It is called when guest is writing the write-tracked page
+	 * and write emulation is finished at that time.
+	 *
+	 * @vcpu: the vcpu where the write access happened.
+	 * @gpa: the physical address written by guest.
+	 * @new: the data was written to the address.
+	 * @bytes: the written length.
+	 */
+	void (*track_write)(struct kvm_vcpu *vcpu, gpa_t gpa, const u8 *new,
+			    int bytes);
+};
+
+void kvm_page_track_init(struct kvm *kvm);
+
+void kvm_page_track_free_memslot(struct kvm_memory_slot *free,
+				 struct kvm_memory_slot *dont);
+int kvm_page_track_create_memslot(struct kvm_memory_slot *slot,
+				  unsigned long npages);
+
+void kvm_slot_page_track_add_page(struct kvm *kvm,
+				  struct kvm_memory_slot *slot, gfn_t gfn,
+				  enum kvm_page_track_mode mode);
+void kvm_slot_page_track_remove_page(struct kvm *kvm,
+				     struct kvm_memory_slot *slot, gfn_t gfn,
+				     enum kvm_page_track_mode mode);
+bool kvm_page_track_is_active(struct kvm_vcpu *vcpu, gfn_t gfn,
+			      enum kvm_page_track_mode mode);
+
+void
+kvm_page_track_register_notifier(struct kvm *kvm,
+				 struct kvm_page_track_notifier_node *n);
+void
+kvm_page_track_unregister_notifier(struct kvm *kvm,
+				   struct kvm_page_track_notifier_node *n);
+void kvm_page_track_write(struct kvm_vcpu *vcpu, gpa_t gpa, const u8 *new,
+			  int bytes);
+#endif
diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index c1adf33fdd0d..bc62e7cbf1b1 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -17,15 +17,8 @@ static inline bool kvm_check_and_clear_guest_paused(void)
 }
 #endif /* CONFIG_KVM_GUEST */
 
-#ifdef CONFIG_DEBUG_RODATA
 #define KVM_HYPERCALL \
         ALTERNATIVE(".byte 0x0f,0x01,0xc1", ".byte 0x0f,0x01,0xd9", X86_FEATURE_VMMCALL)
-#else
-/* On AMD processors, vmcall will generate a trap that we will
- * then rewrite to the appropriate instruction.
- */
-#define KVM_HYPERCALL ".byte 0x0f,0x01,0xc1"
-#endif
 
 /* For KVM hypercalls, a three-byte sequence of either the vmcall or the vmmcall
  * instruction.  The hypervisor may replace it with something else but only the
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 3bbc07a57a31..73d0c9b92087 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -12,7 +12,9 @@
 #define GUEST_PL 1
 
 /* Page for Switcher text itself, then two pages per cpu */
-#define TOTAL_SWITCHER_PAGES (1 + 2 * nr_cpu_ids)
+#define SWITCHER_TEXT_PAGES (1)
+#define SWITCHER_STACK_PAGES (2 * nr_cpu_ids)
+#define TOTAL_SWITCHER_PAGES (SWITCHER_TEXT_PAGES + SWITCHER_STACK_PAGES)
 
 /* Where we map the Switcher, in both Host and Guest. */
 extern unsigned long switcher_addr;
diff --git a/arch/x86/include/asm/livepatch.h b/arch/x86/include/asm/livepatch.h
index 19c099afa861..7e68f9558552 100644
--- a/arch/x86/include/asm/livepatch.h
+++ b/arch/x86/include/asm/livepatch.h
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/ftrace.h>
 
-#ifdef CONFIG_LIVEPATCH
 static inline int klp_check_compiler_support(void)
 {
 #ifndef CC_USING_FENTRY
@@ -40,8 +39,5 @@ static inline void klp_arch_set_pc(struct pt_regs *regs, unsigned long ip)
 {
 	regs->ip = ip;
 }
-#else
-#error Live patching support is disabled; check CONFIG_LIVEPATCH
-#endif
 
 #endif /* _ASM_X86_LIVEPATCH_H */
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 2ea4527e462f..92b6f651fa4f 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -40,8 +40,20 @@
 #define MCI_STATUS_AR	 (1ULL<<55)  /* Action required */
 
 /* AMD-specific bits */
-#define MCI_STATUS_DEFERRED	(1ULL<<44)  /* declare an uncorrected error */
+#define MCI_STATUS_DEFERRED	(1ULL<<44)  /* uncorrected error, deferred exception */
 #define MCI_STATUS_POISON	(1ULL<<43)  /* access poisonous data */
+#define MCI_STATUS_TCC		(1ULL<<55)  /* Task context corrupt */
+
+/*
+ * McaX field if set indicates a given bank supports MCA extensions:
+ *  - Deferred error interrupt type is specifiable by bank.
+ *  - MCx_MISC0[BlkPtr] field indicates presence of extended MISC registers,
+ *    But should not be used to determine MSR numbers.
+ *  - TCC bit is present in MCx_STATUS.
+ */
+#define MCI_CONFIG_MCAX		0x1
+#define MCI_IPID_MCATYPE	0xFFFF0000
+#define MCI_IPID_HWID		0xFFF
 
 /*
  * Note that the full MCACOD field of IA32_MCi_STATUS MSR is
@@ -91,6 +103,16 @@
 #define MCE_LOG_LEN 32
 #define MCE_LOG_SIGNATURE	"MACHINECHECK"
 
+/* AMD Scalable MCA */
+#define MSR_AMD64_SMCA_MC0_MISC0	0xc0002003
+#define MSR_AMD64_SMCA_MC0_CONFIG	0xc0002004
+#define MSR_AMD64_SMCA_MC0_IPID		0xc0002005
+#define MSR_AMD64_SMCA_MC0_MISC1	0xc000200a
+#define MSR_AMD64_SMCA_MCx_MISC(x)	(MSR_AMD64_SMCA_MC0_MISC0 + 0x10*(x))
+#define MSR_AMD64_SMCA_MCx_CONFIG(x)	(MSR_AMD64_SMCA_MC0_CONFIG + 0x10*(x))
+#define MSR_AMD64_SMCA_MCx_IPID(x)	(MSR_AMD64_SMCA_MC0_IPID + 0x10*(x))
+#define MSR_AMD64_SMCA_MCx_MISCy(x, y)	((MSR_AMD64_SMCA_MC0_MISC1 + y) + (0x10*(x)))
+
 /*
  * This structure contains all data related to the MCE log.  Also
  * carries a signature to make it easier to find from external
@@ -113,6 +135,7 @@ struct mca_config {
 	bool ignore_ce;
 	bool disabled;
 	bool ser;
+	bool recovery;
 	bool bios_cmci_threshold;
 	u8 banks;
 	s8 bootlog;
@@ -287,4 +310,49 @@ struct cper_sec_mem_err;
 extern void apei_mce_report_mem_error(int corrected,
 				      struct cper_sec_mem_err *mem_err);
 
+/*
+ * Enumerate new IP types and HWID values in AMD processors which support
+ * Scalable MCA.
+ */
+#ifdef CONFIG_X86_MCE_AMD
+enum amd_ip_types {
+	SMCA_F17H_CORE = 0,	/* Core errors */
+	SMCA_DF,		/* Data Fabric */
+	SMCA_UMC,		/* Unified Memory Controller */
+	SMCA_PB,		/* Parameter Block */
+	SMCA_PSP,		/* Platform Security Processor */
+	SMCA_SMU,		/* System Management Unit */
+	N_AMD_IP_TYPES
+};
+
+struct amd_hwid {
+	const char *name;
+	unsigned int hwid;
+};
+
+extern struct amd_hwid amd_hwids[N_AMD_IP_TYPES];
+
+enum amd_core_mca_blocks {
+	SMCA_LS = 0,	/* Load Store */
+	SMCA_IF,	/* Instruction Fetch */
+	SMCA_L2_CACHE,	/* L2 cache */
+	SMCA_DE,	/* Decoder unit */
+	RES,		/* Reserved */
+	SMCA_EX,	/* Execution unit */
+	SMCA_FP,	/* Floating Point */
+	SMCA_L3_CACHE,	/* L3 cache */
+	N_CORE_MCA_BLOCKS
+};
+
+extern const char * const amd_core_mcablock_names[N_CORE_MCA_BLOCKS];
+
+enum amd_df_mca_blocks {
+	SMCA_CS = 0,	/* Coherent Slave */
+	SMCA_PIE,	/* Power management, Interrupts, etc */
+	N_DF_BLOCKS
+};
+
+extern const char * const amd_df_mcablock_names[N_DF_BLOCKS];
+#endif
+
 #endif /* _ASM_X86_MCE_H */
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 34e62b1dcfce..9d3a96c4da78 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -1,7 +1,9 @@
 #ifndef _ASM_X86_MICROCODE_H
 #define _ASM_X86_MICROCODE_H
 
+#include <asm/cpu.h>
 #include <linux/earlycpio.h>
+#include <linux/initrd.h>
 
 #define native_rdmsr(msr, val1, val2)			\
 do {							\
@@ -95,14 +97,14 @@ static inline void __exit exit_amd_microcode(void) {}
 
 /*
  * In early loading microcode phase on BSP, boot_cpu_data is not set up yet.
- * x86_vendor() gets vendor id for BSP.
+ * x86_cpuid_vendor() gets vendor id for BSP.
  *
  * In 32 bit AP case, accessing boot_cpu_data needs linear address. To simplify
- * coding, we still use x86_vendor() to get vendor id for AP.
+ * coding, we still use x86_cpuid_vendor() to get vendor id for AP.
  *
- * x86_vendor() gets vendor information directly from CPUID.
+ * x86_cpuid_vendor() gets vendor information directly from CPUID.
  */
-static inline int x86_vendor(void)
+static inline int x86_cpuid_vendor(void)
 {
 	u32 eax = 0x00000000;
 	u32 ebx, ecx = 0, edx;
@@ -118,40 +120,14 @@ static inline int x86_vendor(void)
 	return X86_VENDOR_UNKNOWN;
 }
 
-static inline unsigned int __x86_family(unsigned int sig)
-{
-	unsigned int x86;
-
-	x86 = (sig >> 8) & 0xf;
-
-	if (x86 == 0xf)
-		x86 += (sig >> 20) & 0xff;
-
-	return x86;
-}
-
-static inline unsigned int x86_family(void)
+static inline unsigned int x86_cpuid_family(void)
 {
 	u32 eax = 0x00000001;
 	u32 ebx, ecx = 0, edx;
 
 	native_cpuid(&eax, &ebx, &ecx, &edx);
 
-	return __x86_family(eax);
-}
-
-static inline unsigned int x86_model(unsigned int sig)
-{
-	unsigned int x86, model;
-
-	x86 = __x86_family(sig);
-
-	model = (sig >> 4) & 0xf;
-
-	if (x86 == 0x6 || x86 == 0xf)
-		model += ((sig >> 16) & 0xf) << 4;
-
-	return model;
+	return x86_family(eax);
 }
 
 #ifdef CONFIG_MICROCODE
@@ -168,4 +144,29 @@ static inline void reload_early_microcode(void)			{ }
 static inline bool
 get_builtin_firmware(struct cpio_data *cd, const char *name)	{ return false; }
 #endif
+
+static inline unsigned long get_initrd_start(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	return initrd_start;
+#else
+	return 0;
+#endif
+}
+
+static inline unsigned long get_initrd_start_addr(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+#ifdef CONFIG_X86_32
+	unsigned long *initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+
+	return (unsigned long)__pa_nodebug(*initrd_start_p);
+#else
+	return get_initrd_start();
+#endif
+#else /* CONFIG_BLK_DEV_INITRD */
+	return 0;
+#endif
+}
+
 #endif /* _ASM_X86_MICROCODE_H */
diff --git a/arch/x86/include/asm/microcode_intel.h b/arch/x86/include/asm/microcode_intel.h
index 8559b0102ea1..603417f8dd6c 100644
--- a/arch/x86/include/asm/microcode_intel.h
+++ b/arch/x86/include/asm/microcode_intel.h
@@ -40,7 +40,6 @@ struct extended_sigtable {
 #define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
 #define EXT_HEADER_SIZE		(sizeof(struct extended_sigtable))
 #define EXT_SIGNATURE_SIZE	(sizeof(struct extended_signature))
-#define DWSIZE			(sizeof(u32))
 
 #define get_totalsize(mc) \
 	(((struct microcode_intel *)mc)->hdr.datasize ? \
diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h
index 55234d5e7160..1ea0baef1175 100644
--- a/arch/x86/include/asm/mmu.h
+++ b/arch/x86/include/asm/mmu.h
@@ -19,7 +19,8 @@ typedef struct {
 #endif
 
 	struct mutex lock;
-	void __user *vdso;
+	void __user *vdso;			/* vdso base address */
+	const struct vdso_image *vdso_image;	/* vdso image in use */
 
 	atomic_t perf_rdpmc_allowed;	/* nonzero if rdpmc is allowed */
 } mm_context_t;
diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h
index 379cd3658799..84280029cafd 100644
--- a/arch/x86/include/asm/mmu_context.h
+++ b/arch/x86/include/asm/mmu_context.h
@@ -52,15 +52,15 @@ struct ldt_struct {
 /*
  * Used for LDT copy/destruction.
  */
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-void destroy_context(struct mm_struct *mm);
+int init_new_context_ldt(struct task_struct *tsk, struct mm_struct *mm);
+void destroy_context_ldt(struct mm_struct *mm);
 #else	/* CONFIG_MODIFY_LDT_SYSCALL */
-static inline int init_new_context(struct task_struct *tsk,
-				   struct mm_struct *mm)
+static inline int init_new_context_ldt(struct task_struct *tsk,
+				       struct mm_struct *mm)
 {
 	return 0;
 }
-static inline void destroy_context(struct mm_struct *mm) {}
+static inline void destroy_context_ldt(struct mm_struct *mm) {}
 #endif
 
 static inline void load_mm_ldt(struct mm_struct *mm)
@@ -104,6 +104,17 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 #endif
 }
 
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	init_new_context_ldt(tsk, mm);
+	return 0;
+}
+static inline void destroy_context(struct mm_struct *mm)
+{
+	destroy_context_ldt(mm);
+}
+
 static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 			     struct task_struct *tsk)
 {
@@ -116,8 +127,36 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #endif
 		cpumask_set_cpu(cpu, mm_cpumask(next));
 
-		/* Re-load page tables */
+		/*
+		 * Re-load page tables.
+		 *
+		 * This logic has an ordering constraint:
+		 *
+		 *  CPU 0: Write to a PTE for 'next'
+		 *  CPU 0: load bit 1 in mm_cpumask.  if nonzero, send IPI.
+		 *  CPU 1: set bit 1 in next's mm_cpumask
+		 *  CPU 1: load from the PTE that CPU 0 writes (implicit)
+		 *
+		 * We need to prevent an outcome in which CPU 1 observes
+		 * the new PTE value and CPU 0 observes bit 1 clear in
+		 * mm_cpumask.  (If that occurs, then the IPI will never
+		 * be sent, and CPU 0's TLB will contain a stale entry.)
+		 *
+		 * The bad outcome can occur if either CPU's load is
+		 * reordered before that CPU's store, so both CPUs must
+		 * execute full barriers to prevent this from happening.
+		 *
+		 * Thus, switch_mm needs a full barrier between the
+		 * store to mm_cpumask and any operation that could load
+		 * from next->pgd.  TLB fills are special and can happen
+		 * due to instruction fetches or for no reason at all,
+		 * and neither LOCK nor MFENCE orders them.
+		 * Fortunately, load_cr3() is serializing and gives the
+		 * ordering guarantee we need.
+		 *
+		 */
 		load_cr3(next->pgd);
+
 		trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
 
 		/* Stop flush ipis for the previous mm */
@@ -156,10 +195,14 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 			 * schedule, protecting us from simultaneous changes.
 			 */
 			cpumask_set_cpu(cpu, mm_cpumask(next));
+
 			/*
 			 * We were in lazy tlb mode and leave_mm disabled
 			 * tlb flush IPI delivery. We must reload CR3
 			 * to make sure to use no freed page tables.
+			 *
+			 * As above, load_cr3() is serializing and orders TLB
+			 * fills with respect to the mm_cpumask write.
 			 */
 			load_cr3(next->pgd);
 			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
@@ -243,4 +286,68 @@ static inline void arch_unmap(struct mm_struct *mm, struct vm_area_struct *vma,
 		mpx_notify_unmap(mm, vma, start, end);
 }
 
+static inline int vma_pkey(struct vm_area_struct *vma)
+{
+	u16 pkey = 0;
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+	unsigned long vma_pkey_mask = VM_PKEY_BIT0 | VM_PKEY_BIT1 |
+				      VM_PKEY_BIT2 | VM_PKEY_BIT3;
+	pkey = (vma->vm_flags & vma_pkey_mask) >> VM_PKEY_SHIFT;
+#endif
+	return pkey;
+}
+
+static inline bool __pkru_allows_pkey(u16 pkey, bool write)
+{
+	u32 pkru = read_pkru();
+
+	if (!__pkru_allows_read(pkru, pkey))
+		return false;
+	if (write && !__pkru_allows_write(pkru, pkey))
+		return false;
+
+	return true;
+}
+
+/*
+ * We only want to enforce protection keys on the current process
+ * because we effectively have no access to PKRU for other
+ * processes or any way to tell *which * PKRU in a threaded
+ * process we could use.
+ *
+ * So do not enforce things if the VMA is not from the current
+ * mm, or if we are in a kernel thread.
+ */
+static inline bool vma_is_foreign(struct vm_area_struct *vma)
+{
+	if (!current->mm)
+		return true;
+	/*
+	 * Should PKRU be enforced on the access to this VMA?  If
+	 * the VMA is from another process, then PKRU has no
+	 * relevance and should not be enforced.
+	 */
+	if (current->mm != vma->vm_mm)
+		return true;
+
+	return false;
+}
+
+static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
+		bool write, bool execute, bool foreign)
+{
+	/* pkeys never affect instruction fetches */
+	if (execute)
+		return true;
+	/* allow access if the VMA is not one from this process */
+	if (foreign || vma_is_foreign(vma))
+		return true;
+	return __pkru_allows_pkey(vma_pkey(vma), write);
+}
+
+static inline bool arch_pte_access_permitted(pte_t pte, bool write)
+{
+	return __pkru_allows_pkey(pte_flags_pkey(pte_flags(pte)), write);
+}
+
 #endif /* _ASM_X86_MMU_CONTEXT_H */
diff --git a/arch/x86/include/asm/msi.h b/arch/x86/include/asm/msi.h
index 93724cc62177..eb4b09b41df5 100644
--- a/arch/x86/include/asm/msi.h
+++ b/arch/x86/include/asm/msi.h
@@ -1,7 +1,13 @@
 #ifndef _ASM_X86_MSI_H
 #define _ASM_X86_MSI_H
 #include <asm/hw_irq.h>
+#include <asm/irqdomain.h>
 
 typedef struct irq_alloc_info msi_alloc_info_t;
 
+int pci_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec,
+		    msi_alloc_info_t *arg);
+
+void pci_msi_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc);
+
 #endif /* _ASM_X86_MSI_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 9f3905697f12..5b3c9a55f51c 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -1,7 +1,12 @@
 #ifndef _ASM_X86_MSR_INDEX_H
 #define _ASM_X86_MSR_INDEX_H
 
-/* CPU model specific register (MSR) numbers */
+/*
+ * CPU model specific register (MSR) numbers.
+ *
+ * Do not add new entries to this file unless the definitions are shared
+ * between multiple compilation units.
+ */
 
 /* x86-64 specific MSRs */
 #define MSR_EFER		0xc0000080 /* extended feature register */
@@ -35,7 +40,7 @@
 #define MSR_IA32_PERFCTR0		0x000000c1
 #define MSR_IA32_PERFCTR1		0x000000c2
 #define MSR_FSB_FREQ			0x000000cd
-#define MSR_NHM_PLATFORM_INFO		0x000000ce
+#define MSR_PLATFORM_INFO		0x000000ce
 
 #define MSR_NHM_SNB_PKG_CST_CFG_CTL	0x000000e2
 #define NHM_C3_AUTO_DEMOTE		(1UL << 25)
@@ -44,7 +49,6 @@
 #define SNB_C1_AUTO_UNDEMOTE		(1UL << 27)
 #define SNB_C3_AUTO_UNDEMOTE		(1UL << 28)
 
-#define MSR_PLATFORM_INFO		0x000000ce
 #define MSR_MTRRcap			0x000000fe
 #define MSR_IA32_BBL_CR_CTL		0x00000119
 #define MSR_IA32_BBL_CR_CTL3		0x0000011e
@@ -163,6 +167,14 @@
 #define MSR_PKG_C9_RESIDENCY		0x00000631
 #define MSR_PKG_C10_RESIDENCY		0x00000632
 
+/* Interrupt Response Limit */
+#define MSR_PKGC3_IRTL			0x0000060a
+#define MSR_PKGC6_IRTL			0x0000060b
+#define MSR_PKGC7_IRTL			0x0000060c
+#define MSR_PKGC8_IRTL			0x00000633
+#define MSR_PKGC9_IRTL			0x00000634
+#define MSR_PKGC10_IRTL			0x00000635
+
 /* Run Time Average Power Limiting (RAPL) Interface */
 
 #define MSR_RAPL_POWER_UNIT		0x00000606
@@ -186,6 +198,7 @@
 #define MSR_PP1_ENERGY_STATUS		0x00000641
 #define MSR_PP1_POLICY			0x00000642
 
+/* Config TDP MSRs */
 #define MSR_CONFIG_TDP_NOMINAL		0x00000648
 #define MSR_CONFIG_TDP_LEVEL_1		0x00000649
 #define MSR_CONFIG_TDP_LEVEL_2		0x0000064A
@@ -206,13 +219,6 @@
 #define MSR_GFX_PERF_LIMIT_REASONS	0x000006B0
 #define MSR_RING_PERF_LIMIT_REASONS	0x000006B1
 
-/* Config TDP MSRs */
-#define MSR_CONFIG_TDP_NOMINAL		0x00000648
-#define MSR_CONFIG_TDP_LEVEL1		0x00000649
-#define MSR_CONFIG_TDP_LEVEL2		0x0000064A
-#define MSR_CONFIG_TDP_CONTROL		0x0000064B
-#define MSR_TURBO_ACTIVATION_RATIO	0x0000064C
-
 /* Hardware P state interface */
 #define MSR_PPERF			0x0000064e
 #define MSR_PERF_LIMIT_REASONS		0x0000064f
@@ -231,10 +237,10 @@
 #define HWP_PACKAGE_LEVEL_REQUEST_BIT	(1<<11)
 
 /* IA32_HWP_CAPABILITIES */
-#define HWP_HIGHEST_PERF(x)		(x & 0xff)
-#define HWP_GUARANTEED_PERF(x)		((x & (0xff << 8)) >>8)
-#define HWP_MOSTEFFICIENT_PERF(x)	((x & (0xff << 16)) >>16)
-#define HWP_LOWEST_PERF(x)		((x & (0xff << 24)) >>24)
+#define HWP_HIGHEST_PERF(x)		(((x) >> 0) & 0xff)
+#define HWP_GUARANTEED_PERF(x)		(((x) >> 8) & 0xff)
+#define HWP_MOSTEFFICIENT_PERF(x)	(((x) >> 16) & 0xff)
+#define HWP_LOWEST_PERF(x)		(((x) >> 24) & 0xff)
 
 /* IA32_HWP_REQUEST */
 #define HWP_MIN_PERF(x) 		(x & 0xff)
@@ -322,6 +328,7 @@
 #define MSR_F15H_PERF_CTR		0xc0010201
 #define MSR_F15H_NB_PERF_CTL		0xc0010240
 #define MSR_F15H_NB_PERF_CTR		0xc0010241
+#define MSR_F15H_IC_CFG			0xc0011021
 
 /* Fam 10h MSRs */
 #define MSR_FAM10H_MMIO_CONF_BASE	0xc0010058
diff --git a/arch/x86/include/asm/msr-trace.h b/arch/x86/include/asm/msr-trace.h
new file mode 100644
index 000000000000..7567225747d8
--- /dev/null
+++ b/arch/x86/include/asm/msr-trace.h
@@ -0,0 +1,57 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM msr
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE msr-trace
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH asm/
+
+#if !defined(_TRACE_MSR_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_MSR_H
+
+#include <linux/tracepoint.h>
+
+/*
+ * Tracing for x86 model specific registers. Directly maps to the
+ * RDMSR/WRMSR instructions.
+ */
+
+DECLARE_EVENT_CLASS(msr_trace_class,
+	    TP_PROTO(unsigned msr, u64 val, int failed),
+	    TP_ARGS(msr, val, failed),
+	    TP_STRUCT__entry(
+		    __field(	unsigned,	msr )
+		    __field(    u64,		val )
+		    __field(    int,		failed )
+	    ),
+	    TP_fast_assign(
+		    __entry->msr = msr;
+		    __entry->val = val;
+		    __entry->failed = failed;
+	    ),
+	    TP_printk("%x, value %llx%s",
+		      __entry->msr,
+		      __entry->val,
+		      __entry->failed ? " #GP" : "")
+);
+
+DEFINE_EVENT(msr_trace_class, read_msr,
+	     TP_PROTO(unsigned msr, u64 val, int failed),
+	     TP_ARGS(msr, val, failed)
+);
+
+DEFINE_EVENT(msr_trace_class, write_msr,
+	     TP_PROTO(unsigned msr, u64 val, int failed),
+	     TP_ARGS(msr, val, failed)
+);
+
+DEFINE_EVENT(msr_trace_class, rdpmc,
+	     TP_PROTO(unsigned msr, u64 val, int failed),
+	     TP_ARGS(msr, val, failed)
+);
+
+#endif /* _TRACE_MSR_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 77d8b284e4a7..7a79ee2778b3 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -32,13 +32,15 @@ struct msr_regs_info {
 	int err;
 };
 
-static inline unsigned long long native_read_tscp(unsigned int *aux)
-{
-	unsigned long low, high;
-	asm volatile(".byte 0x0f,0x01,0xf9"
-		     : "=a" (low), "=d" (high), "=c" (*aux));
-	return low | ((u64)high << 32);
-}
+struct saved_msr {
+	bool valid;
+	struct msr_info info;
+};
+
+struct saved_msrs {
+	unsigned int num;
+	struct saved_msr *array;
+};
 
 /*
  * both i386 and x86_64 returns 64-bit value in edx:eax, but gcc's "A"
@@ -57,11 +59,34 @@ static inline unsigned long long native_read_tscp(unsigned int *aux)
 #define EAX_EDX_RET(val, low, high)	"=A" (val)
 #endif
 
+#ifdef CONFIG_TRACEPOINTS
+/*
+ * Be very careful with includes. This header is prone to include loops.
+ */
+#include <asm/atomic.h>
+#include <linux/tracepoint-defs.h>
+
+extern struct tracepoint __tracepoint_read_msr;
+extern struct tracepoint __tracepoint_write_msr;
+extern struct tracepoint __tracepoint_rdpmc;
+#define msr_tracepoint_active(t) static_key_false(&(t).key)
+extern void do_trace_write_msr(unsigned msr, u64 val, int failed);
+extern void do_trace_read_msr(unsigned msr, u64 val, int failed);
+extern void do_trace_rdpmc(unsigned msr, u64 val, int failed);
+#else
+#define msr_tracepoint_active(t) false
+static inline void do_trace_write_msr(unsigned msr, u64 val, int failed) {}
+static inline void do_trace_read_msr(unsigned msr, u64 val, int failed) {}
+static inline void do_trace_rdpmc(unsigned msr, u64 val, int failed) {}
+#endif
+
 static inline unsigned long long native_read_msr(unsigned int msr)
 {
 	DECLARE_ARGS(val, low, high);
 
 	asm volatile("rdmsr" : EAX_EDX_RET(val, low, high) : "c" (msr));
+	if (msr_tracepoint_active(__tracepoint_read_msr))
+		do_trace_read_msr(msr, EAX_EDX_VAL(val, low, high), 0);
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -78,6 +103,8 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 		     _ASM_EXTABLE(2b, 3b)
 		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
 		     : "c" (msr), [fault] "i" (-EIO));
+	if (msr_tracepoint_active(__tracepoint_read_msr))
+		do_trace_read_msr(msr, EAX_EDX_VAL(val, low, high), *err);
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -85,6 +112,8 @@ static inline void native_write_msr(unsigned int msr,
 				    unsigned low, unsigned high)
 {
 	asm volatile("wrmsr" : : "c" (msr), "a"(low), "d" (high) : "memory");
+	if (msr_tracepoint_active(__tracepoint_read_msr))
+		do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
 }
 
 /* Can be uninlined because referenced by paravirt */
@@ -102,6 +131,8 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 		     : "c" (msr), "0" (low), "d" (high),
 		       [fault] "i" (-EIO)
 		     : "memory");
+	if (msr_tracepoint_active(__tracepoint_read_msr))
+		do_trace_write_msr(msr, ((u64)high << 32 | low), err);
 	return err;
 }
 
@@ -160,6 +191,8 @@ static inline unsigned long long native_read_pmc(int counter)
 	DECLARE_ARGS(val, low, high);
 
 	asm volatile("rdpmc" : EAX_EDX_RET(val, low, high) : "c" (counter));
+	if (msr_tracepoint_active(__tracepoint_rdpmc))
+		do_trace_rdpmc(counter, EAX_EDX_VAL(val, low, high), 0);
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -190,7 +223,7 @@ static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
 
 static inline void wrmsrl(unsigned msr, u64 val)
 {
-	native_write_msr(msr, (u32)val, (u32)(val >> 32));
+	native_write_msr(msr, (u32)(val & 0xffffffffULL), (u32)(val >> 32));
 }
 
 /* wrmsr with exception handling */
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index c70689b5e5aa..0deeb2d26df7 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -3,6 +3,8 @@
 
 #include <linux/sched.h>
 
+#include <asm/cpufeature.h>
+
 #define MWAIT_SUBSTATE_MASK		0xf
 #define MWAIT_CSTATE_MASK		0xf
 #define MWAIT_SUBSTATE_SIZE		4
diff --git a/arch/x86/include/asm/page_types.h b/arch/x86/include/asm/page_types.h
index c5b7fb2774d0..7bd0099384ca 100644
--- a/arch/x86/include/asm/page_types.h
+++ b/arch/x86/include/asm/page_types.h
@@ -5,23 +5,25 @@
 #include <linux/types.h>
 
 /* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	12
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
+#define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
+
+#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
+#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
 
 #define __PHYSICAL_MASK		((phys_addr_t)((1ULL << __PHYSICAL_MASK_SHIFT) - 1))
 #define __VIRTUAL_MASK		((1UL << __VIRTUAL_MASK_SHIFT) - 1)
 
-/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+/* Cast *PAGE_MASK to a signed type so that it is sign-extended if
    virtual addresses are 32-bits but physical addresses are larger
    (ie, 32-bit PAE). */
 #define PHYSICAL_PAGE_MASK	(((signed long)PAGE_MASK) & __PHYSICAL_MASK)
-
-#define PMD_PAGE_SIZE		(_AC(1, UL) << PMD_SHIFT)
-#define PMD_PAGE_MASK		(~(PMD_PAGE_SIZE-1))
-
-#define PUD_PAGE_SIZE		(_AC(1, UL) << PUD_SHIFT)
-#define PUD_PAGE_MASK		(~(PUD_PAGE_SIZE-1))
+#define PHYSICAL_PMD_PAGE_MASK	(((signed long)PMD_PAGE_MASK) & __PHYSICAL_MASK)
+#define PHYSICAL_PUD_PAGE_MASK	(((signed long)PUD_PAGE_MASK) & __PHYSICAL_MASK)
 
 #define HPAGE_SHIFT		PMD_SHIFT
 #define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 10d0596433f8..601f1b8f9961 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -13,12 +13,19 @@
 #include <linux/bug.h>
 #include <linux/types.h>
 #include <linux/cpumask.h>
+#include <asm/frame.h>
 
 static inline int paravirt_enabled(void)
 {
 	return pv_info.paravirt_enabled;
 }
 
+static inline int paravirt_has_feature(unsigned int feature)
+{
+	WARN_ON_ONCE(!pv_info.paravirt_enabled);
+	return (pv_info.features & feature);
+}
+
 static inline void load_sp0(struct tss_struct *tss,
 			     struct thread_struct *thread)
 {
@@ -285,15 +292,6 @@ static inline void slow_down_io(void)
 #endif
 }
 
-#ifdef CONFIG_SMP
-static inline void startup_ipi_hook(int phys_apicid, unsigned long start_eip,
-				    unsigned long start_esp)
-{
-	PVOP_VCALL3(pv_apic_ops.startup_ipi_hook,
-		    phys_apicid, start_eip, start_esp);
-}
-#endif
-
 static inline void paravirt_activate_mm(struct mm_struct *prev,
 					struct mm_struct *next)
 {
@@ -375,23 +373,6 @@ static inline void pte_update(struct mm_struct *mm, unsigned long addr,
 {
 	PVOP_VCALL3(pv_mmu_ops.pte_update, mm, addr, ptep);
 }
-static inline void pmd_update(struct mm_struct *mm, unsigned long addr,
-			      pmd_t *pmdp)
-{
-	PVOP_VCALL3(pv_mmu_ops.pmd_update, mm, addr, pmdp);
-}
-
-static inline void pte_update_defer(struct mm_struct *mm, unsigned long addr,
-				    pte_t *ptep)
-{
-	PVOP_VCALL3(pv_mmu_ops.pte_update_defer, mm, addr, ptep);
-}
-
-static inline void pmd_update_defer(struct mm_struct *mm, unsigned long addr,
-				    pmd_t *pmdp)
-{
-	PVOP_VCALL3(pv_mmu_ops.pmd_update_defer, mm, addr, pmdp);
-}
 
 static inline pte_t __pte(pteval_t val)
 {
@@ -776,15 +757,19 @@ static __always_inline void __ticket_unlock_kick(struct arch_spinlock *lock,
  * call. The return value in rax/eax will not be saved, even for void
  * functions.
  */
+#define PV_THUNK_NAME(func) "__raw_callee_save_" #func
 #define PV_CALLEE_SAVE_REGS_THUNK(func)					\
 	extern typeof(func) __raw_callee_save_##func;			\
 									\
 	asm(".pushsection .text;"					\
-	    ".globl __raw_callee_save_" #func " ; "			\
-	    "__raw_callee_save_" #func ": "				\
+	    ".globl " PV_THUNK_NAME(func) ";"				\
+	    ".type " PV_THUNK_NAME(func) ", @function;"			\
+	    PV_THUNK_NAME(func) ":"					\
+	    FRAME_BEGIN							\
 	    PV_SAVE_ALL_CALLER_REGS					\
 	    "call " #func ";"						\
 	    PV_RESTORE_ALL_CALLER_REGS					\
+	    FRAME_END							\
 	    "ret;"							\
 	    ".popsection")
 
@@ -922,23 +907,11 @@ extern void default_banner(void);
 		  call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable);	\
 		  PV_RESTORE_REGS(clobbers | CLBR_CALLEE_SAVE);)
 
-#define USERGS_SYSRET32							\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32),	\
-		  CLBR_NONE,						\
-		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_usergs_sysret32))
-
 #ifdef CONFIG_X86_32
 #define GET_CR0_INTO_EAX				\
 	push %ecx; push %edx;				\
 	call PARA_INDIRECT(pv_cpu_ops+PV_CPU_read_cr0);	\
 	pop %edx; pop %ecx
-
-#define ENABLE_INTERRUPTS_SYSEXIT					\
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit),	\
-		  CLBR_NONE,						\
-		  jmp PARA_INDIRECT(pv_cpu_ops+PV_CPU_irq_enable_sysexit))
-
-
 #else	/* !CONFIG_X86_32 */
 
 /*
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 31247b5bff7c..e8c2326478c8 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -70,9 +70,14 @@ struct pv_info {
 #endif
 
 	int paravirt_enabled;
+	unsigned int features;	  /* valid only if paravirt_enabled is set */
 	const char *name;
 };
 
+#define paravirt_has(x) paravirt_has_feature(PV_SUPPORTED_##x)
+/* Supported features */
+#define PV_SUPPORTED_RTC        (1<<0)
+
 struct pv_init_ops {
 	/*
 	 * Patch may replace one of the defined code sequences with
@@ -157,15 +162,6 @@ struct pv_cpu_ops {
 
 	u64 (*read_pmc)(int counter);
 
-#ifdef CONFIG_X86_32
-	/*
-	 * Atomically enable interrupts and return to userspace.  This
-	 * is only used in 32-bit kernels.  64-bit kernels use
-	 * usergs_sysret32 instead.
-	 */
-	void (*irq_enable_sysexit)(void);
-#endif
-
 	/*
 	 * Switch to usermode gs and return to 64-bit usermode using
 	 * sysret.  Only used in 64-bit kernels to return to 64-bit
@@ -174,14 +170,6 @@ struct pv_cpu_ops {
 	 */
 	void (*usergs_sysret64)(void);
 
-	/*
-	 * Switch to usermode gs and return to 32-bit usermode using
-	 * sysret.  Used to return to 32-on-64 compat processes.
-	 * Other usermode register state, including %esp, must already
-	 * be restored.
-	 */
-	void (*usergs_sysret32)(void);
-
 	/* Normal iret.  Jump to this with the standard iret stack
 	   frame set up. */
 	void (*iret)(void);
@@ -215,14 +203,6 @@ struct pv_irq_ops {
 #endif
 };
 
-struct pv_apic_ops {
-#ifdef CONFIG_X86_LOCAL_APIC
-	void (*startup_ipi_hook)(int phys_apicid,
-				 unsigned long start_eip,
-				 unsigned long start_esp);
-#endif
-};
-
 struct pv_mmu_ops {
 	unsigned long (*read_cr2)(void);
 	void (*write_cr2)(unsigned long);
@@ -274,12 +254,6 @@ struct pv_mmu_ops {
 			   pmd_t *pmdp, pmd_t pmdval);
 	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
 			   pte_t *ptep);
-	void (*pte_update_defer)(struct mm_struct *mm,
-				 unsigned long addr, pte_t *ptep);
-	void (*pmd_update)(struct mm_struct *mm, unsigned long addr,
-			   pmd_t *pmdp);
-	void (*pmd_update_defer)(struct mm_struct *mm,
-				 unsigned long addr, pmd_t *pmdp);
 
 	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
 					pte_t *ptep);
@@ -354,7 +328,6 @@ struct paravirt_patch_template {
 	struct pv_time_ops pv_time_ops;
 	struct pv_cpu_ops pv_cpu_ops;
 	struct pv_irq_ops pv_irq_ops;
-	struct pv_apic_ops pv_apic_ops;
 	struct pv_mmu_ops pv_mmu_ops;
 	struct pv_lock_ops pv_lock_ops;
 };
@@ -364,7 +337,6 @@ extern struct pv_init_ops pv_init_ops;
 extern struct pv_time_ops pv_time_ops;
 extern struct pv_cpu_ops pv_cpu_ops;
 extern struct pv_irq_ops pv_irq_ops;
-extern struct pv_apic_ops pv_apic_ops;
 extern struct pv_mmu_ops pv_mmu_ops;
 extern struct pv_lock_ops pv_lock_ops;
 
@@ -402,10 +374,8 @@ extern struct pv_lock_ops pv_lock_ops;
 	__visible extern const char start_##ops##_##name[], end_##ops##_##name[];	\
 	asm(NATIVE_LABEL("start_", ops, name) code NATIVE_LABEL("end_", ops, name))
 
-unsigned paravirt_patch_nop(void);
 unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
 unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ignore(unsigned len);
 unsigned paravirt_patch_call(void *insnbuf,
 			     const void *target, u16 tgt_clobbers,
 			     unsigned long addr, u16 site_clobbers,
@@ -496,8 +466,9 @@ int paravirt_disable_iospace(void);
  * makes sure the incoming and outgoing types are always correct.
  */
 #ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS				\
-	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
+#define PVOP_VCALL_ARGS							\
+	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx;	\
+	register void *__sp asm("esp")
 #define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
 
 #define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
@@ -515,9 +486,10 @@ int paravirt_disable_iospace(void);
 #define VEXTRA_CLOBBERS
 #else  /* CONFIG_X86_64 */
 /* [re]ax isn't an arg, but the return val */
-#define PVOP_VCALL_ARGS					\
-	unsigned long __edi = __edi, __esi = __esi,	\
-		__edx = __edx, __ecx = __ecx, __eax = __eax
+#define PVOP_VCALL_ARGS						\
+	unsigned long __edi = __edi, __esi = __esi,		\
+		__edx = __edx, __ecx = __ecx, __eax = __eax;	\
+	register void *__sp asm("rsp")
 #define PVOP_CALL_ARGS		PVOP_VCALL_ARGS
 
 #define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
@@ -556,7 +528,7 @@ int paravirt_disable_iospace(void);
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : call_clbr			\
+				     : call_clbr, "+r" (__sp)		\
 				     : paravirt_type(op),		\
 				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
@@ -566,7 +538,7 @@ int paravirt_disable_iospace(void);
 			asm volatile(pre				\
 				     paravirt_alt(PARAVIRT_CALL)	\
 				     post				\
-				     : call_clbr			\
+				     : call_clbr, "+r" (__sp)		\
 				     : paravirt_type(op),		\
 				       paravirt_clobber(clbr),		\
 				       ##__VA_ARGS__			\
@@ -593,7 +565,7 @@ int paravirt_disable_iospace(void);
 		asm volatile(pre					\
 			     paravirt_alt(PARAVIRT_CALL)		\
 			     post					\
-			     : call_clbr				\
+			     : call_clbr, "+r" (__sp)			\
 			     : paravirt_type(op),			\
 			       paravirt_clobber(clbr),			\
 			       ##__VA_ARGS__				\
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 462594320d39..9ab7507ca1c2 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -20,6 +20,9 @@ struct pci_sysdata {
 #ifdef CONFIG_X86_64
 	void		*iommu;		/* IOMMU private data */
 #endif
+#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+	void		*fwnode;	/* IRQ domain for MSI assignment */
+#endif
 };
 
 extern int pci_routeirq;
@@ -32,6 +35,7 @@ extern int noioapicreroute;
 static inline int pci_domain_nr(struct pci_bus *bus)
 {
 	struct pci_sysdata *sd = bus->sysdata;
+
 	return sd->domain;
 }
 
@@ -41,6 +45,17 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 #endif
 
+#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
+static inline void *_pci_root_bus_fwnode(struct pci_bus *bus)
+{
+	struct pci_sysdata *sd = bus->sysdata;
+
+	return sd->fwnode;
+}
+
+#define pci_root_bus_fwnode	_pci_root_bus_fwnode
+#endif
+
 /* Can be used to override the logic in pci_scan_bus for skipping
    already-configured bus numbers - to be used for buggy BIOSes
    or architectures with incomplete PCI setup by the loader */
@@ -105,9 +120,6 @@ void native_restore_msi_irqs(struct pci_dev *dev);
 #include <asm/pci_64.h>
 #endif
 
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
 /* generic pci stuff */
 #include <asm-generic/pci.h>
 
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index fa1195dae425..d08eacd298c2 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -93,6 +93,8 @@ extern raw_spinlock_t pci_config_lock;
 extern int (*pcibios_enable_irq)(struct pci_dev *dev);
 extern void (*pcibios_disable_irq)(struct pci_dev *dev);
 
+extern bool mp_should_keep_irq(struct device *dev);
+
 struct pci_raw_ops {
 	int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 *val);
@@ -151,11 +153,11 @@ extern struct list_head pci_mmcfg_list;
 #define PCI_MMCFG_BUS_OFFSET(bus)      ((bus) << 20)
 
 /*
- * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
- * on their northbrige except through the * %eax register. As such, you MUST
- * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
- * accessor functions.
- * In fact just use pci_config_*, nothing else please.
+ * On AMD Fam10h CPUs, all PCI MMIO configuration space accesses must use
+ * %eax.  No other source or target registers may be used.  The following
+ * mmio_config_* accessors enforce this.  See "BIOS and Kernel Developer's
+ * Guide (BKDG) For AMD Family 10h Processors", rev. 3.48, sec 2.11.1,
+ * "MMIO Configuration Coding Requirements".
  */
 static inline unsigned char mmio_config_readb(void __iomem *pos)
 {
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 7bcb861a04e5..5a2ed3ed2f26 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -165,6 +165,7 @@ struct x86_pmu_capability {
 #define GLOBAL_STATUS_ASIF				BIT_ULL(60)
 #define GLOBAL_STATUS_COUNTERS_FROZEN			BIT_ULL(59)
 #define GLOBAL_STATUS_LBRS_FROZEN			BIT_ULL(58)
+#define GLOBAL_STATUS_TRACE_TOPAPMI			BIT_ULL(55)
 
 /*
  * IBS cpuid feature detection
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 6ec0c8b2e9df..97f3242e133c 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -69,9 +69,6 @@ extern struct mm_struct *pgd_page_get_mm(struct page *page);
 #define pmd_clear(pmd)			native_pmd_clear(pmd)
 
 #define pte_update(mm, addr, ptep)              do { } while (0)
-#define pte_update_defer(mm, addr, ptep)        do { } while (0)
-#define pmd_update(mm, addr, ptep)              do { } while (0)
-#define pmd_update_defer(mm, addr, ptep)        do { } while (0)
 
 #define pgd_val(x)	native_pgd_val(x)
 #define __pgd(x)	native_make_pgd(x)
@@ -102,6 +99,20 @@ static inline int pte_dirty(pte_t pte)
 	return pte_flags(pte) & _PAGE_DIRTY;
 }
 
+
+static inline u32 read_pkru(void)
+{
+	if (boot_cpu_has(X86_FEATURE_OSPKE))
+		return __read_pkru();
+	return 0;
+}
+
+static inline void write_pkru(u32 pkru)
+{
+	if (boot_cpu_has(X86_FEATURE_OSPKE))
+		__write_pkru(pkru);
+}
+
 static inline int pte_young(pte_t pte)
 {
 	return pte_flags(pte) & _PAGE_ACCESSED;
@@ -165,20 +176,22 @@ static inline int pmd_large(pmd_t pte)
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline int pmd_trans_splitting(pmd_t pmd)
-{
-	return pmd_val(pmd) & _PAGE_SPLITTING;
-}
-
 static inline int pmd_trans_huge(pmd_t pmd)
 {
-	return pmd_val(pmd) & _PAGE_PSE;
+	return (pmd_val(pmd) & (_PAGE_PSE|_PAGE_DEVMAP)) == _PAGE_PSE;
 }
 
 static inline int has_transparent_hugepage(void)
 {
 	return cpu_has_pse;
 }
+
+#ifdef __HAVE_ARCH_PTE_DEVMAP
+static inline int pmd_devmap(pmd_t pmd)
+{
+	return !!(pmd_val(pmd) & _PAGE_DEVMAP);
+}
+#endif
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 static inline pte_t pte_set_flags(pte_t pte, pteval_t set)
@@ -255,6 +268,11 @@ static inline pte_t pte_mkspecial(pte_t pte)
 	return pte_set_flags(pte, _PAGE_SPECIAL);
 }
 
+static inline pte_t pte_mkdevmap(pte_t pte)
+{
+	return pte_set_flags(pte, _PAGE_SPECIAL|_PAGE_DEVMAP);
+}
+
 static inline pmd_t pmd_set_flags(pmd_t pmd, pmdval_t set)
 {
 	pmdval_t v = native_pmd_val(pmd);
@@ -274,6 +292,11 @@ static inline pmd_t pmd_mkold(pmd_t pmd)
 	return pmd_clear_flags(pmd, _PAGE_ACCESSED);
 }
 
+static inline pmd_t pmd_mkclean(pmd_t pmd)
+{
+	return pmd_clear_flags(pmd, _PAGE_DIRTY);
+}
+
 static inline pmd_t pmd_wrprotect(pmd_t pmd)
 {
 	return pmd_clear_flags(pmd, _PAGE_RW);
@@ -284,6 +307,11 @@ static inline pmd_t pmd_mkdirty(pmd_t pmd)
 	return pmd_set_flags(pmd, _PAGE_DIRTY | _PAGE_SOFT_DIRTY);
 }
 
+static inline pmd_t pmd_mkdevmap(pmd_t pmd)
+{
+	return pmd_set_flags(pmd, _PAGE_DEVMAP);
+}
+
 static inline pmd_t pmd_mkhuge(pmd_t pmd)
 {
 	return pmd_set_flags(pmd, _PAGE_PSE);
@@ -465,6 +493,13 @@ static inline int pte_present(pte_t a)
 	return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE);
 }
 
+#ifdef __HAVE_ARCH_PTE_DEVMAP
+static inline int pte_devmap(pte_t a)
+{
+	return (pte_flags(a) & _PAGE_DEVMAP) == _PAGE_DEVMAP;
+}
+#endif
+
 #define pte_accessible pte_accessible
 static inline bool pte_accessible(struct mm_struct *mm, pte_t a)
 {
@@ -731,14 +766,9 @@ static inline void native_set_pmd_at(struct mm_struct *mm, unsigned long addr,
  * updates should either be sets, clears, or set_pte_atomic for P->P
  * transitions, which means this hook should only be called for user PTEs.
  * This hook implies a P->P protection or access change has taken place, which
- * requires a subsequent TLB flush.  The notification can optionally be delayed
- * until the TLB flush event by using the pte_update_defer form of the
- * interface, but care must be taken to assure that the flush happens while
- * still holding the same page table lock so that the shadow and primary pages
- * do not become out of sync on SMP.
+ * requires a subsequent TLB flush.
  */
 #define pte_update(mm, addr, ptep)		do { } while (0)
-#define pte_update_defer(mm, addr, ptep)	do { } while (0)
 #endif
 
 /*
@@ -816,10 +846,6 @@ extern int pmdp_clear_flush_young(struct vm_area_struct *vma,
 				  unsigned long address, pmd_t *pmdp);
 
 
-#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
-extern void pmdp_splitting_flush(struct vm_area_struct *vma,
-				 unsigned long addr, pmd_t *pmdp);
-
 #define __HAVE_ARCH_PMD_WRITE
 static inline int pmd_write(pmd_t pmd)
 {
@@ -830,9 +856,7 @@ static inline int pmd_write(pmd_t pmd)
 static inline pmd_t pmdp_huge_get_and_clear(struct mm_struct *mm, unsigned long addr,
 				       pmd_t *pmdp)
 {
-	pmd_t pmd = native_pmdp_get_and_clear(pmdp);
-	pmd_update(mm, addr, pmdp);
-	return pmd;
+	return native_pmdp_get_and_clear(pmdp);
 }
 
 #define __HAVE_ARCH_PMDP_SET_WRPROTECT
@@ -840,7 +864,6 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm,
 				      unsigned long addr, pmd_t *pmdp)
 {
 	clear_bit(_PAGE_BIT_RW, (unsigned long *)pmdp);
-	pmd_update(mm, addr, pmdp);
 }
 
 /*
@@ -902,6 +925,36 @@ static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
 }
 #endif
 
+#define PKRU_AD_BIT 0x1
+#define PKRU_WD_BIT 0x2
+#define PKRU_BITS_PER_PKEY 2
+
+static inline bool __pkru_allows_read(u32 pkru, u16 pkey)
+{
+	int pkru_pkey_bits = pkey * PKRU_BITS_PER_PKEY;
+	return !(pkru & (PKRU_AD_BIT << pkru_pkey_bits));
+}
+
+static inline bool __pkru_allows_write(u32 pkru, u16 pkey)
+{
+	int pkru_pkey_bits = pkey * PKRU_BITS_PER_PKEY;
+	/*
+	 * Access-disable disables writes too so we need to check
+	 * both bits here.
+	 */
+	return !(pkru & ((PKRU_AD_BIT|PKRU_WD_BIT) << pkru_pkey_bits));
+}
+
+static inline u16 pte_flags_pkey(unsigned long pte_flags)
+{
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+	/* ifdef to avoid doing 59-bit shift on 32-bit values */
+	return (pte_flags & _PAGE_PKEY_MASK) >> _PAGE_BIT_PKEY_BIT0;
+#else
+	return 0;
+#endif
+}
+
 #include <asm-generic/pgtable.h>
 #endif	/* __ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index dd5b0aa9dd2f..7b5efe264eff 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -20,12 +20,18 @@
 #define _PAGE_BIT_SOFTW2	10	/* " */
 #define _PAGE_BIT_SOFTW3	11	/* " */
 #define _PAGE_BIT_PAT_LARGE	12	/* On 2MB or 1GB pages */
+#define _PAGE_BIT_SOFTW4	58	/* available for programmer */
+#define _PAGE_BIT_PKEY_BIT0	59	/* Protection Keys, bit 1/4 */
+#define _PAGE_BIT_PKEY_BIT1	60	/* Protection Keys, bit 2/4 */
+#define _PAGE_BIT_PKEY_BIT2	61	/* Protection Keys, bit 3/4 */
+#define _PAGE_BIT_PKEY_BIT3	62	/* Protection Keys, bit 4/4 */
+#define _PAGE_BIT_NX		63	/* No execute: only valid after cpuid check */
+
 #define _PAGE_BIT_SPECIAL	_PAGE_BIT_SOFTW1
 #define _PAGE_BIT_CPA_TEST	_PAGE_BIT_SOFTW1
-#define _PAGE_BIT_SPLITTING	_PAGE_BIT_SOFTW2 /* only valid on a PSE pmd */
 #define _PAGE_BIT_HIDDEN	_PAGE_BIT_SOFTW3 /* hidden by kmemcheck */
 #define _PAGE_BIT_SOFT_DIRTY	_PAGE_BIT_SOFTW3 /* software dirty tracking */
-#define _PAGE_BIT_NX           63       /* No execute: only valid after cpuid check */
+#define _PAGE_BIT_DEVMAP	_PAGE_BIT_SOFTW4
 
 /* If _PAGE_BIT_PRESENT is clear, we use these: */
 /* - if the user mapped it with PROT_NONE; pte_present gives true */
@@ -46,9 +52,24 @@
 #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
 #define _PAGE_SPECIAL	(_AT(pteval_t, 1) << _PAGE_BIT_SPECIAL)
 #define _PAGE_CPA_TEST	(_AT(pteval_t, 1) << _PAGE_BIT_CPA_TEST)
-#define _PAGE_SPLITTING	(_AT(pteval_t, 1) << _PAGE_BIT_SPLITTING)
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+#define _PAGE_PKEY_BIT0	(_AT(pteval_t, 1) << _PAGE_BIT_PKEY_BIT0)
+#define _PAGE_PKEY_BIT1	(_AT(pteval_t, 1) << _PAGE_BIT_PKEY_BIT1)
+#define _PAGE_PKEY_BIT2	(_AT(pteval_t, 1) << _PAGE_BIT_PKEY_BIT2)
+#define _PAGE_PKEY_BIT3	(_AT(pteval_t, 1) << _PAGE_BIT_PKEY_BIT3)
+#else
+#define _PAGE_PKEY_BIT0	(_AT(pteval_t, 0))
+#define _PAGE_PKEY_BIT1	(_AT(pteval_t, 0))
+#define _PAGE_PKEY_BIT2	(_AT(pteval_t, 0))
+#define _PAGE_PKEY_BIT3	(_AT(pteval_t, 0))
+#endif
 #define __HAVE_ARCH_PTE_SPECIAL
 
+#define _PAGE_PKEY_MASK (_PAGE_PKEY_BIT0 | \
+			 _PAGE_PKEY_BIT1 | \
+			 _PAGE_PKEY_BIT2 | \
+			 _PAGE_PKEY_BIT3)
+
 #ifdef CONFIG_KMEMCHECK
 #define _PAGE_HIDDEN	(_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
 #else
@@ -85,8 +106,11 @@
 
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 #define _PAGE_NX	(_AT(pteval_t, 1) << _PAGE_BIT_NX)
+#define _PAGE_DEVMAP	(_AT(u64, 1) << _PAGE_BIT_DEVMAP)
+#define __HAVE_ARCH_PTE_DEVMAP
 #else
 #define _PAGE_NX	(_AT(pteval_t, 0))
+#define _PAGE_DEVMAP	(_AT(pteval_t, 0))
 #endif
 
 #define _PAGE_PROTNONE	(_AT(pteval_t, 1) << _PAGE_BIT_PROTNONE)
@@ -96,7 +120,12 @@
 #define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED |	\
 			 _PAGE_DIRTY)
 
-/* Set of bits not changed in pte_modify */
+/*
+ * Set of bits not changed in pte_modify.  The pte's
+ * protection key is treated like _PAGE_RW, for
+ * instance, and is *not* included in this mask since
+ * pte_modify() does modify it.
+ */
 #define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
 			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY |	\
 			 _PAGE_SOFT_DIRTY)
@@ -212,7 +241,10 @@ enum page_cache_mode {
 /* Extracts the PFN from a (pte|pmd|pud|pgd)val_t of a 4KB page */
 #define PTE_PFN_MASK		((pteval_t)PHYSICAL_PAGE_MASK)
 
-/* Extracts the flags from a (pte|pmd|pud|pgd)val_t of a 4KB page */
+/*
+ *  Extracts the flags from a (pte|pmd|pud|pgd)val_t
+ *  This includes the protection key value.
+ */
 #define PTE_FLAGS_MASK		(~PTE_PFN_MASK)
 
 typedef struct pgprot { pgprotval_t pgprot; } pgprot_t;
@@ -279,17 +311,14 @@ static inline pmdval_t native_pmd_val(pmd_t pmd)
 static inline pudval_t pud_pfn_mask(pud_t pud)
 {
 	if (native_pud_val(pud) & _PAGE_PSE)
-		return PUD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+		return PHYSICAL_PUD_PAGE_MASK;
 	else
 		return PTE_PFN_MASK;
 }
 
 static inline pudval_t pud_flags_mask(pud_t pud)
 {
-	if (native_pud_val(pud) & _PAGE_PSE)
-		return ~(PUD_PAGE_MASK & (pudval_t)PHYSICAL_PAGE_MASK);
-	else
-		return ~PTE_PFN_MASK;
+	return ~pud_pfn_mask(pud);
 }
 
 static inline pudval_t pud_flags(pud_t pud)
@@ -300,17 +329,14 @@ static inline pudval_t pud_flags(pud_t pud)
 static inline pmdval_t pmd_pfn_mask(pmd_t pmd)
 {
 	if (native_pmd_val(pmd) & _PAGE_PSE)
-		return PMD_PAGE_MASK & PHYSICAL_PAGE_MASK;
+		return PHYSICAL_PMD_PAGE_MASK;
 	else
 		return PTE_PFN_MASK;
 }
 
 static inline pmdval_t pmd_flags_mask(pmd_t pmd)
 {
-	if (native_pmd_val(pmd) & _PAGE_PSE)
-		return ~(PMD_PAGE_MASK & (pmdval_t)PHYSICAL_PAGE_MASK);
-	else
-		return ~PTE_PFN_MASK;
+	return ~pmd_pfn_mask(pmd);
 }
 
 static inline pmdval_t pmd_flags(pmd_t pmd)
@@ -369,20 +395,18 @@ static inline enum page_cache_mode pgprot2cachemode(pgprot_t pgprot)
 }
 static inline pgprot_t pgprot_4k_2_large(pgprot_t pgprot)
 {
+	pgprotval_t val = pgprot_val(pgprot);
 	pgprot_t new;
-	unsigned long val;
 
-	val = pgprot_val(pgprot);
 	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
 		((val & _PAGE_PAT) << (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
 	return new;
 }
 static inline pgprot_t pgprot_large_2_4k(pgprot_t pgprot)
 {
+	pgprotval_t val = pgprot_val(pgprot);
 	pgprot_t new;
-	unsigned long val;
 
-	val = pgprot_val(pgprot);
 	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
 			  ((val & _PAGE_PAT_LARGE) >>
 			   (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h
new file mode 100644
index 000000000000..7b84565c916c
--- /dev/null
+++ b/arch/x86/include/asm/pkeys.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_X86_PKEYS_H
+#define _ASM_X86_PKEYS_H
+
+#define arch_max_pkey() (boot_cpu_has(X86_FEATURE_OSPKE) ? 16 : 1)
+
+extern int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
+		unsigned long init_val);
+
+/*
+ * Try to dedicate one of the protection keys to be used as an
+ * execute-only protection key.
+ */
+#define PKEY_DEDICATED_EXECUTE_ONLY 15
+extern int __execute_only_pkey(struct mm_struct *mm);
+static inline int execute_only_pkey(struct mm_struct *mm)
+{
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return 0;
+
+	return __execute_only_pkey(mm);
+}
+
+extern int __arch_override_mprotect_pkey(struct vm_area_struct *vma,
+		int prot, int pkey);
+static inline int arch_override_mprotect_pkey(struct vm_area_struct *vma,
+		int prot, int pkey)
+{
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return 0;
+
+	return __arch_override_mprotect_pkey(vma, prot, pkey);
+}
+
+#endif /*_ASM_X86_PKEYS_H */
diff --git a/arch/x86/include/asm/platform_sst_audio.h b/arch/x86/include/asm/platform_sst_audio.h
index 7249e6d0902d..5973a2f3db3d 100644
--- a/arch/x86/include/asm/platform_sst_audio.h
+++ b/arch/x86/include/asm/platform_sst_audio.h
@@ -55,6 +55,7 @@ enum sst_audio_device_id_mrfld {
 	PIPE_MEDIA0_IN = 0x8F,
 	PIPE_MEDIA1_IN = 0x90,
 	PIPE_MEDIA2_IN = 0x91,
+	PIPE_MEDIA3_IN = 0x9C,
 	PIPE_RSVD = 0xFF,
 };
 
diff --git a/arch/x86/include/asm/pmem.h b/arch/x86/include/asm/pmem.h
index d8ce3ec816ab..fbc5e92e1ecc 100644
--- a/arch/x86/include/asm/pmem.h
+++ b/arch/x86/include/asm/pmem.h
@@ -47,6 +47,15 @@ static inline void arch_memcpy_to_pmem(void __pmem *dst, const void *src,
 		BUG();
 }
 
+static inline int arch_memcpy_from_pmem(void *dst, const void __pmem *src,
+		size_t n)
+{
+	if (static_cpu_has(X86_FEATURE_MCE_RECOVERY))
+		return memcpy_mcsafe(dst, (void __force *) src, n);
+	memcpy(dst, (void __force *) src, n);
+	return 0;
+}
+
 /**
  * arch_wmb_pmem - synchronize writes to persistent memory
  *
@@ -67,18 +76,19 @@ static inline void arch_wmb_pmem(void)
 }
 
 /**
- * __arch_wb_cache_pmem - write back a cache range with CLWB
+ * arch_wb_cache_pmem - write back a cache range with CLWB
  * @vaddr:	virtual start address
  * @size:	number of bytes to write back
  *
  * Write back a cache range using the CLWB (cache line write back)
  * instruction.  This function requires explicit ordering with an
- * arch_wmb_pmem() call.  This API is internal to the x86 PMEM implementation.
+ * arch_wmb_pmem() call.
  */
-static inline void __arch_wb_cache_pmem(void *vaddr, size_t size)
+static inline void arch_wb_cache_pmem(void __pmem *addr, size_t size)
 {
 	u16 x86_clflush_size = boot_cpu_data.x86_clflush_size;
 	unsigned long clflush_mask = x86_clflush_size - 1;
+	void *vaddr = (void __force *)addr;
 	void *vend = vaddr + size;
 	void *p;
 
@@ -115,7 +125,7 @@ static inline size_t arch_copy_from_iter_pmem(void __pmem *addr, size_t bytes,
 	len = copy_from_iter_nocache(vaddr, bytes, i);
 
 	if (__iter_needs_pmem_wb(i))
-		__arch_wb_cache_pmem(vaddr, bytes);
+		arch_wb_cache_pmem(addr, bytes);
 
 	return len;
 }
@@ -132,13 +142,13 @@ static inline void arch_clear_pmem(void __pmem *addr, size_t size)
 {
 	void *vaddr = (void __force *)addr;
 
-	/* TODO: implement the zeroing via non-temporal writes */
-	if (size == PAGE_SIZE && ((unsigned long)vaddr & ~PAGE_MASK) == 0)
-		clear_page(vaddr);
-	else
-		memset(vaddr, 0, size);
+	memset(vaddr, 0, size);
+	arch_wb_cache_pmem(addr, size);
+}
 
-	__arch_wb_cache_pmem(vaddr, size);
+static inline void arch_invalidate_pmem(void __pmem *addr, size_t size)
+{
+	clflush_cache_range((void __force *) addr, size);
 }
 
 static inline bool __arch_has_wmb_pmem(void)
diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h
index 01bcde84d3e4..d397deb58146 100644
--- a/arch/x86/include/asm/preempt.h
+++ b/arch/x86/include/asm/preempt.h
@@ -94,10 +94,19 @@ static __always_inline bool should_resched(int preempt_offset)
 
 #ifdef CONFIG_PREEMPT
   extern asmlinkage void ___preempt_schedule(void);
-# define __preempt_schedule() asm ("call ___preempt_schedule")
+# define __preempt_schedule()					\
+({								\
+	register void *__sp asm(_ASM_SP);			\
+	asm volatile ("call ___preempt_schedule" : "+r"(__sp));	\
+})
+
   extern asmlinkage void preempt_schedule(void);
   extern asmlinkage void ___preempt_schedule_notrace(void);
-# define __preempt_schedule_notrace() asm ("call ___preempt_schedule_notrace")
+# define __preempt_schedule_notrace()					\
+({									\
+	register void *__sp asm(_ASM_SP);				\
+	asm volatile ("call ___preempt_schedule_notrace" : "+r"(__sp));	\
+})
   extern asmlinkage void preempt_schedule_notrace(void);
 #endif
 
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 67522256c7ff..9264476f3d57 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -13,7 +13,7 @@ struct vm86;
 #include <asm/types.h>
 #include <uapi/asm/sigcontext.h>
 #include <asm/current.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/page.h>
 #include <asm/pgtable_types.h>
 #include <asm/percpu.h>
@@ -24,7 +24,6 @@ struct vm86;
 #include <asm/fpu/types.h>
 
 #include <linux/personality.h>
-#include <linux/cpumask.h>
 #include <linux/cache.h>
 #include <linux/threads.h>
 #include <linux/math64.h>
@@ -129,10 +128,10 @@ struct cpuinfo_x86 {
 	u16			booted_cores;
 	/* Physical processor id: */
 	u16			phys_proc_id;
+	/* Logical processor id: */
+	u16			logical_proc_id;
 	/* Core id: */
 	u16			cpu_core_id;
-	/* Compute unit id */
-	u8			compute_unit_id;
 	/* Index into per_cpu list: */
 	u16			cpu_index;
 	u32			microcode;
@@ -298,10 +297,13 @@ struct tss_struct {
 	 */
 	unsigned long		io_bitmap[IO_BITMAP_LONGS + 1];
 
+#ifdef CONFIG_X86_32
 	/*
-	 * Space for the temporary SYSENTER stack:
+	 * Space for the temporary SYSENTER stack.
 	 */
+	unsigned long		SYSENTER_stack_canary;
 	unsigned long		SYSENTER_stack[64];
+#endif
 
 } ____cacheline_aligned;
 
@@ -472,6 +474,7 @@ static inline unsigned long current_top_of_stack(void)
 #else
 #define __cpuid			native_cpuid
 #define paravirt_enabled()	0
+#define paravirt_has(x) 	0
 
 static inline void load_sp0(struct tss_struct *tss,
 			    struct thread_struct *thread)
@@ -765,7 +768,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
  * Return saved PC of a blocked thread.
  * What is this good for? it will be always the scheduler or ret_from_fork.
  */
-#define thread_saved_pc(t)	(*(unsigned long *)((t)->thread.sp - 8))
+#define thread_saved_pc(t)	READ_ONCE_NOCHECK(*(unsigned long *)((t)->thread.sp - 8))
 
 #define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.sp0 - 1)
 extern unsigned long KSTK_ESP(struct task_struct *task);
diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h
index a4a77286cb1d..9b9b30b19441 100644
--- a/arch/x86/include/asm/proto.h
+++ b/arch/x86/include/asm/proto.h
@@ -7,12 +7,23 @@
 
 void syscall_init(void);
 
+#ifdef CONFIG_X86_64
 void entry_SYSCALL_64(void);
-void entry_SYSCALL_compat(void);
+#endif
+
+#ifdef CONFIG_X86_32
 void entry_INT80_32(void);
-void entry_INT80_compat(void);
 void entry_SYSENTER_32(void);
+void __begin_SYSENTER_singlestep_region(void);
+void __end_SYSENTER_singlestep_region(void);
+#endif
+
+#ifdef CONFIG_IA32_EMULATION
 void entry_SYSENTER_compat(void);
+void __end_entry_SYSENTER_compat(void);
+void entry_SYSCALL_compat(void);
+void entry_INT80_compat(void);
+#endif
 
 void x86_configure_nx(void);
 void x86_report_nx(void);
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 7a6bed5c08bc..fdcc04020636 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -4,6 +4,15 @@
 #include <linux/clocksource.h>
 #include <asm/pvclock-abi.h>
 
+#ifdef CONFIG_KVM_GUEST
+extern struct pvclock_vsyscall_time_info *pvclock_pvti_cpu0_va(void);
+#else
+static inline struct pvclock_vsyscall_time_info *pvclock_pvti_cpu0_va(void)
+{
+	return NULL;
+}
+#endif
+
 /* some helper functions for xen and kvm pv clock sources */
 cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src);
 u8 pvclock_read_flags(struct pvclock_vcpu_time_info *src);
@@ -91,10 +100,5 @@ struct pvclock_vsyscall_time_info {
 } __attribute__((__aligned__(SMP_CACHE_BYTES)));
 
 #define PVTI_SIZE sizeof(struct pvclock_vsyscall_time_info)
-#define PVCLOCK_VSYSCALL_NR_PAGES (((NR_CPUS-1)/(PAGE_SIZE/PVTI_SIZE))+1)
-
-int __init pvclock_init_vsyscall(struct pvclock_vsyscall_time_info *i,
-				 int size);
-struct pvclock_vcpu_time_info *pvclock_get_vsyscall_time_info(int cpu);
 
 #endif /* _ASM_X86_PVCLOCK_H */
diff --git a/arch/x86/include/asm/qspinlock_paravirt.h b/arch/x86/include/asm/qspinlock_paravirt.h
index b002e711ba88..9d55f9b6e167 100644
--- a/arch/x86/include/asm/qspinlock_paravirt.h
+++ b/arch/x86/include/asm/qspinlock_paravirt.h
@@ -1,6 +1,69 @@
 #ifndef __ASM_QSPINLOCK_PARAVIRT_H
 #define __ASM_QSPINLOCK_PARAVIRT_H
 
+/*
+ * For x86-64, PV_CALLEE_SAVE_REGS_THUNK() saves and restores 8 64-bit
+ * registers. For i386, however, only 1 32-bit register needs to be saved
+ * and restored. So an optimized version of __pv_queued_spin_unlock() is
+ * hand-coded for 64-bit, but it isn't worthwhile to do it for 32-bit.
+ */
+#ifdef CONFIG_64BIT
+
+PV_CALLEE_SAVE_REGS_THUNK(__pv_queued_spin_unlock_slowpath);
+#define __pv_queued_spin_unlock	__pv_queued_spin_unlock
+#define PV_UNLOCK		"__raw_callee_save___pv_queued_spin_unlock"
+#define PV_UNLOCK_SLOWPATH	"__raw_callee_save___pv_queued_spin_unlock_slowpath"
+
+/*
+ * Optimized assembly version of __raw_callee_save___pv_queued_spin_unlock
+ * which combines the registers saving trunk and the body of the following
+ * C code:
+ *
+ * void __pv_queued_spin_unlock(struct qspinlock *lock)
+ * {
+ *	struct __qspinlock *l = (void *)lock;
+ *	u8 lockval = cmpxchg(&l->locked, _Q_LOCKED_VAL, 0);
+ *
+ *	if (likely(lockval == _Q_LOCKED_VAL))
+ *		return;
+ *	pv_queued_spin_unlock_slowpath(lock, lockval);
+ * }
+ *
+ * For x86-64,
+ *   rdi = lock              (first argument)
+ *   rsi = lockval           (second argument)
+ *   rdx = internal variable (set to 0)
+ */
+asm    (".pushsection .text;"
+	".globl " PV_UNLOCK ";"
+	".type " PV_UNLOCK ", @function;"
+	".align 4,0x90;"
+	PV_UNLOCK ": "
+	FRAME_BEGIN
+	"push  %rdx;"
+	"mov   $0x1,%eax;"
+	"xor   %edx,%edx;"
+	"lock cmpxchg %dl,(%rdi);"
+	"cmp   $0x1,%al;"
+	"jne   .slowpath;"
+	"pop   %rdx;"
+	FRAME_END
+	"ret;"
+	".slowpath: "
+	"push   %rsi;"
+	"movzbl %al,%esi;"
+	"call " PV_UNLOCK_SLOWPATH ";"
+	"pop    %rsi;"
+	"pop    %rdx;"
+	FRAME_END
+	"ret;"
+	".size " PV_UNLOCK ", .-" PV_UNLOCK ";"
+	".popsection");
+
+#else /* CONFIG_64BIT */
+
+extern void __pv_queued_spin_unlock(struct qspinlock *lock);
 PV_CALLEE_SAVE_REGS_THUNK(__pv_queued_spin_unlock);
 
+#endif /* CONFIG_64BIT */
 #endif
diff --git a/arch/x86/include/asm/reboot.h b/arch/x86/include/asm/reboot.h
index a82c4f1b4d83..2cb1cc253d51 100644
--- a/arch/x86/include/asm/reboot.h
+++ b/arch/x86/include/asm/reboot.h
@@ -25,5 +25,6 @@ void __noreturn machine_real_restart(unsigned int type);
 
 typedef void (*nmi_shootdown_cb)(int, struct pt_regs*);
 void nmi_shootdown_cpus(nmi_shootdown_cb callback);
+void run_crash_ipi_callback(struct pt_regs *regs);
 
 #endif /* _ASM_X86_REBOOT_H */
diff --git a/arch/x86/include/asm/required-features.h b/arch/x86/include/asm/required-features.h
index 5c6e4fb370f5..4916144e3c42 100644
--- a/arch/x86/include/asm/required-features.h
+++ b/arch/x86/include/asm/required-features.h
@@ -92,5 +92,12 @@
 #define REQUIRED_MASK7	0
 #define REQUIRED_MASK8	0
 #define REQUIRED_MASK9	0
+#define REQUIRED_MASK10	0
+#define REQUIRED_MASK11	0
+#define REQUIRED_MASK12	0
+#define REQUIRED_MASK13	0
+#define REQUIRED_MASK14	0
+#define REQUIRED_MASK15	0
+#define REQUIRED_MASK16	0
 
 #endif /* _ASM_X86_REQUIRED_FEATURES_H */
diff --git a/arch/x86/include/asm/rwsem.h b/arch/x86/include/asm/rwsem.h
index cad82c9c2fde..ceec86eb68e9 100644
--- a/arch/x86/include/asm/rwsem.h
+++ b/arch/x86/include/asm/rwsem.h
@@ -25,7 +25,7 @@
  * This should be totally fair - if anything is waiting, a process that wants a
  * lock will go to the back of the queue. When the currently active lock is
  * released, if there's a writer at the front of the queue, then that and only
- * that will be woken up; if there's a bunch of consequtive readers at the
+ * that will be woken up; if there's a bunch of consecutive readers at the
  * front, then they'll all be woken up, but no other readers will be.
  */
 
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index 0a5242428659..13b6cdd0af57 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -7,7 +7,7 @@
 extern char __brk_base[], __brk_limit[];
 extern struct exception_table_entry __stop___ex_table[];
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+#if defined(CONFIG_X86_64)
 extern char __end_rodata_hpage_align[];
 #endif
 
diff --git a/arch/x86/include/asm/sighandling.h b/arch/x86/include/asm/sighandling.h
index 89db46752a8f..452c88b8ad06 100644
--- a/arch/x86/include/asm/sighandling.h
+++ b/arch/x86/include/asm/sighandling.h
@@ -13,7 +13,6 @@
 			 X86_EFLAGS_CF | X86_EFLAGS_RF)
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
-int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc);
 int setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 		     struct pt_regs *regs, unsigned long mask);
 
diff --git a/arch/x86/include/asm/smap.h b/arch/x86/include/asm/smap.h
index ba665ebd17bb..db333300bd4b 100644
--- a/arch/x86/include/asm/smap.h
+++ b/arch/x86/include/asm/smap.h
@@ -15,7 +15,7 @@
 
 #include <linux/stringify.h>
 #include <asm/nops.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 
 /* "Raw" instruction opcodes */
 #define __ASM_CLAC	.byte 0x0f,0x01,0xca
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 222a6a3ca2b5..66b057306f40 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -16,20 +16,10 @@
 #endif
 #include <asm/thread_info.h>
 #include <asm/cpumask.h>
-#include <asm/cpufeature.h>
 
 extern int smp_num_siblings;
 extern unsigned int num_processors;
 
-static inline bool cpu_has_ht_siblings(void)
-{
-	bool has_siblings = false;
-#ifdef CONFIG_SMP
-	has_siblings = cpu_has_ht && smp_num_siblings > 1;
-#endif
-	return has_siblings;
-}
-
 DECLARE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_map);
 DECLARE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_core_map);
 /* cpus sharing the last level cache: */
@@ -74,9 +64,6 @@ struct smp_ops {
 extern void set_cpu_sibling_map(int cpu);
 
 #ifdef CONFIG_SMP
-#ifndef CONFIG_PARAVIRT
-#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
-#endif
 extern struct smp_ops smp_ops;
 
 static inline void smp_send_stop(void)
@@ -168,6 +155,7 @@ static inline int wbinvd_on_all_cpus(void)
 	wbinvd();
 	return 0;
 }
+#define smp_num_siblings	1
 #endif /* CONFIG_SMP */
 
 extern unsigned disabled_cpus;
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index 2270e41b32fd..d96d04377765 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -98,6 +98,44 @@ static inline void native_write_cr8(unsigned long val)
 }
 #endif
 
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+static inline u32 __read_pkru(void)
+{
+	u32 ecx = 0;
+	u32 edx, pkru;
+
+	/*
+	 * "rdpkru" instruction.  Places PKRU contents in to EAX,
+	 * clears EDX and requires that ecx=0.
+	 */
+	asm volatile(".byte 0x0f,0x01,0xee\n\t"
+		     : "=a" (pkru), "=d" (edx)
+		     : "c" (ecx));
+	return pkru;
+}
+
+static inline void __write_pkru(u32 pkru)
+{
+	u32 ecx = 0, edx = 0;
+
+	/*
+	 * "wrpkru" instruction.  Loads contents in EAX to PKRU,
+	 * requires that ecx = edx = 0.
+	 */
+	asm volatile(".byte 0x0f,0x01,0xef\n\t"
+		     : : "a" (pkru), "c"(ecx), "d"(edx));
+}
+#else
+static inline u32 __read_pkru(void)
+{
+	return 0;
+}
+
+static inline void __write_pkru(u32 pkru)
+{
+}
+#endif
+
 static inline void native_wbinvd(void)
 {
 	asm volatile("wbinvd": : :"memory");
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index 70bbe39043a9..7c247e7404be 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -37,7 +37,7 @@ print_context_stack_bp(struct thread_info *tinfo,
 /* Generic stack tracer with callbacks */
 
 struct stacktrace_ops {
-	void (*address)(void *data, unsigned long address, int reliable);
+	int (*address)(void *data, unsigned long address, int reliable);
 	/* On negative return stop dumping */
 	int (*stack)(void *data, char *name);
 	walk_stack_t	walk_stack;
diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
index ff8b9a17dc4b..90dbbd9666d4 100644
--- a/arch/x86/include/asm/string_64.h
+++ b/arch/x86/include/asm/string_64.h
@@ -78,6 +78,19 @@ int strcmp(const char *cs, const char *ct);
 #define memset(s, c, n) __memset(s, c, n)
 #endif
 
+/**
+ * memcpy_mcsafe - copy memory with indication if a machine check happened
+ *
+ * @dst:	destination address
+ * @src:	source address
+ * @cnt:	number of bytes to copy
+ *
+ * Low level memory copy function that catches machine checks
+ *
+ * Return 0 for success, -EFAULT for fail
+ */
+int memcpy_mcsafe(void *dst, const void *src, size_t cnt);
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_X86_STRING_64_H */
diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h
index d1793f06854d..8e9dbe7b73a1 100644
--- a/arch/x86/include/asm/suspend_32.h
+++ b/arch/x86/include/asm/suspend_32.h
@@ -15,6 +15,7 @@ struct saved_context {
 	unsigned long cr0, cr2, cr3, cr4;
 	u64 misc_enable;
 	bool misc_enable_saved;
+	struct saved_msrs saved_msrs;
 	struct desc_ptr gdt_desc;
 	struct desc_ptr idt;
 	u16 ldt;
diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h
index 7ebf0ebe4e68..6136a18152af 100644
--- a/arch/x86/include/asm/suspend_64.h
+++ b/arch/x86/include/asm/suspend_64.h
@@ -24,6 +24,7 @@ struct saved_context {
 	unsigned long cr0, cr2, cr3, cr4, cr8;
 	u64 misc_enable;
 	bool misc_enable_saved;
+	struct saved_msrs saved_msrs;
 	unsigned long efer;
 	u16 gdt_pad; /* Unused */
 	struct desc_ptr gdt_desc;
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index c7b551028740..ffae84df8a93 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -49,7 +49,7 @@
  */
 #ifndef __ASSEMBLY__
 struct task_struct;
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <linux/atomic.h>
 
 struct thread_info {
@@ -134,10 +134,13 @@ struct thread_info {
 #define _TIF_ADDR32		(1 << TIF_ADDR32)
 #define _TIF_X32		(1 << TIF_X32)
 
-/* work to do in syscall_trace_enter() */
+/*
+ * work to do in syscall_trace_enter().  Also includes TIF_NOHZ for
+ * enter_from_user_mode()
+ */
 #define _TIF_WORK_SYSCALL_ENTRY	\
 	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |	\
-	 _TIF_SECCOMP | _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT |	\
+	 _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT |	\
 	 _TIF_NOHZ)
 
 /* work to do on any return to user space */
@@ -273,11 +276,9 @@ static inline bool is_ia32_task(void)
  */
 #define force_iret() set_thread_flag(TIF_NOTIFY_RESUME)
 
-#endif	/* !__ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
 extern void arch_task_cache_init(void);
 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
 extern void arch_release_task_struct(struct task_struct *tsk);
-#endif
+#endif	/* !__ASSEMBLY__ */
+
 #endif /* _ASM_X86_THREAD_INFO_H */
diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index 6df2029405a3..1fde8d580a5b 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -5,8 +5,57 @@
 #include <linux/sched.h>
 
 #include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <asm/special_insns.h>
 
+static inline void __invpcid(unsigned long pcid, unsigned long addr,
+			     unsigned long type)
+{
+	struct { u64 d[2]; } desc = { { pcid, addr } };
+
+	/*
+	 * The memory clobber is because the whole point is to invalidate
+	 * stale TLB entries and, especially if we're flushing global
+	 * mappings, we don't want the compiler to reorder any subsequent
+	 * memory accesses before the TLB flush.
+	 *
+	 * The hex opcode is invpcid (%ecx), %eax in 32-bit mode and
+	 * invpcid (%rcx), %rax in long mode.
+	 */
+	asm volatile (".byte 0x66, 0x0f, 0x38, 0x82, 0x01"
+		      : : "m" (desc), "a" (type), "c" (&desc) : "memory");
+}
+
+#define INVPCID_TYPE_INDIV_ADDR		0
+#define INVPCID_TYPE_SINGLE_CTXT	1
+#define INVPCID_TYPE_ALL_INCL_GLOBAL	2
+#define INVPCID_TYPE_ALL_NON_GLOBAL	3
+
+/* Flush all mappings for a given pcid and addr, not including globals. */
+static inline void invpcid_flush_one(unsigned long pcid,
+				     unsigned long addr)
+{
+	__invpcid(pcid, addr, INVPCID_TYPE_INDIV_ADDR);
+}
+
+/* Flush all mappings for a given PCID, not including globals. */
+static inline void invpcid_flush_single_context(unsigned long pcid)
+{
+	__invpcid(pcid, 0, INVPCID_TYPE_SINGLE_CTXT);
+}
+
+/* Flush all mappings, including globals, for all PCIDs. */
+static inline void invpcid_flush_all(void)
+{
+	__invpcid(0, 0, INVPCID_TYPE_ALL_INCL_GLOBAL);
+}
+
+/* Flush all mappings for all PCIDs except globals. */
+static inline void invpcid_flush_all_nonglobals(void)
+{
+	__invpcid(0, 0, INVPCID_TYPE_ALL_NON_GLOBAL);
+}
+
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
@@ -104,6 +153,15 @@ static inline void __native_flush_tlb_global(void)
 {
 	unsigned long flags;
 
+	if (static_cpu_has(X86_FEATURE_INVPCID)) {
+		/*
+		 * Using INVPCID is considerably faster than a pair of writes
+		 * to CR4 sandwiched inside an IRQ flag save/restore.
+		 */
+		invpcid_flush_all();
+		return;
+	}
+
 	/*
 	 * Read-modify-write to CR4 - protect it from preemption and
 	 * from interrupts. (Use the raw variant because this code can
@@ -261,12 +319,6 @@ static inline void reset_lazy_tlbstate(void)
 
 #endif	/* SMP */
 
-/* Not inlined due to inc_irq_stat not being defined yet */
-#define flush_tlb_local() {		\
-	inc_irq_stat(irq_tlb_count);	\
-	local_flush_tlb();		\
-}
-
 #ifndef CONFIG_PARAVIRT
 #define flush_tlb_others(mask, mm, start, end)	\
 	native_flush_tlb_others(mask, mm, start, end)
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 0fb46482dfde..7f991bd5031b 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -119,12 +119,23 @@ static inline void setup_node_to_cpumask_map(void) { }
 
 extern const struct cpumask *cpu_coregroup_mask(int cpu);
 
+#define topology_logical_package_id(cpu)	(cpu_data(cpu).logical_proc_id)
 #define topology_physical_package_id(cpu)	(cpu_data(cpu).phys_proc_id)
 #define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
 
 #ifdef ENABLE_TOPO_DEFINES
 #define topology_core_cpumask(cpu)		(per_cpu(cpu_core_map, cpu))
 #define topology_sibling_cpumask(cpu)		(per_cpu(cpu_sibling_map, cpu))
+
+extern unsigned int __max_logical_packages;
+#define topology_max_packages()			(__max_logical_packages)
+int topology_update_package_map(unsigned int apicid, unsigned int cpu);
+extern int topology_phys_to_logical_pkg(unsigned int pkg);
+#else
+#define topology_max_packages()			(1)
+static inline int
+topology_update_package_map(unsigned int apicid, unsigned int cpu) { return 0; }
+static inline int topology_phys_to_logical_pkg(unsigned int pkg) { return 0; }
 #endif
 
 static inline void arch_fix_phys_package_id(int num, u32 slot)
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 6d7c5479bcea..174c4212780a 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -29,6 +29,8 @@ static inline cycles_t get_cycles(void)
 	return rdtsc();
 }
 
+extern struct system_counterval_t convert_art_to_tsc(cycle_t art);
+
 extern void tsc_init(void);
 extern void mark_tsc_unstable(char *reason);
 extern int unsynchronized_tsc(void);
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 09b1b0ab94b7..a969ae607be8 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -90,12 +90,11 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un
 	likely(!__range_not_ok(addr, size, user_addr_max()))
 
 /*
- * The exception table consists of pairs of addresses relative to the
- * exception table enty itself: the first is the address of an
- * instruction that is allowed to fault, and the second is the address
- * at which the program should continue.  No registers are modified,
- * so it is entirely up to the continuation code to figure out what to
- * do.
+ * The exception table consists of triples of addresses relative to the
+ * exception table entry itself. The first address is of an instruction
+ * that is allowed to fault, the second is the target at which the program
+ * should continue. The third is a handler function to deal with the fault
+ * caused by the instruction in the first field.
  *
  * All the routines below use bits of fixup code that are out of line
  * with the main instruction path.  This means when everything is well,
@@ -104,13 +103,13 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un
  */
 
 struct exception_table_entry {
-	int insn, fixup;
+	int insn, fixup, handler;
 };
-/* This is not the generic standard exception_table_entry format */
-#define ARCH_HAS_SORT_EXTABLE
-#define ARCH_HAS_SEARCH_EXTABLE
 
-extern int fixup_exception(struct pt_regs *regs);
+#define ARCH_HAS_RELATIVE_EXTABLE
+
+extern int fixup_exception(struct pt_regs *regs, int trapnr);
+extern bool ex_has_fault_handler(unsigned long ip);
 extern int early_fixup_exception(unsigned long *ip);
 
 /*
@@ -134,6 +133,9 @@ extern int __get_user_4(void);
 extern int __get_user_8(void);
 extern int __get_user_bad(void);
 
+#define __uaccess_begin() stac()
+#define __uaccess_end()   clac()
+
 /*
  * This is a type: either unsigned long, if the argument fits into
  * that type, or otherwise unsigned long long.
@@ -176,10 +178,11 @@ __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
 ({									\
 	int __ret_gu;							\
 	register __inttype(*(ptr)) __val_gu asm("%"_ASM_DX);		\
+	register void *__sp asm(_ASM_SP);				\
 	__chk_user_ptr(ptr);						\
 	might_fault();							\
-	asm volatile("call __get_user_%P3"				\
-		     : "=a" (__ret_gu), "=r" (__val_gu)			\
+	asm volatile("call __get_user_%P4"				\
+		     : "=a" (__ret_gu), "=r" (__val_gu), "+r" (__sp)	\
 		     : "0" (ptr), "i" (sizeof(*(ptr))));		\
 	(x) = (__force __typeof__(*(ptr))) __val_gu;			\
 	__builtin_expect(__ret_gu, 0);					\
@@ -193,10 +196,10 @@ __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
 
 #ifdef CONFIG_X86_32
 #define __put_user_asm_u64(x, addr, err, errret)			\
-	asm volatile(ASM_STAC "\n"					\
+	asm volatile("\n"						\
 		     "1:	movl %%eax,0(%2)\n"			\
 		     "2:	movl %%edx,4(%2)\n"			\
-		     "3: " ASM_CLAC "\n"				\
+		     "3:"						\
 		     ".section .fixup,\"ax\"\n"				\
 		     "4:	movl %3,%0\n"				\
 		     "	jmp 3b\n"					\
@@ -207,10 +210,10 @@ __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL))
 		     : "A" (x), "r" (addr), "i" (errret), "0" (err))
 
 #define __put_user_asm_ex_u64(x, addr)					\
-	asm volatile(ASM_STAC "\n"					\
+	asm volatile("\n"						\
 		     "1:	movl %%eax,0(%1)\n"			\
 		     "2:	movl %%edx,4(%1)\n"			\
-		     "3: " ASM_CLAC "\n"				\
+		     "3:"						\
 		     _ASM_EXTABLE_EX(1b, 2b)				\
 		     _ASM_EXTABLE_EX(2b, 3b)				\
 		     : : "A" (x), "r" (addr))
@@ -304,6 +307,10 @@ do {									\
 	}								\
 } while (0)
 
+/*
+ * This doesn't do __uaccess_begin/end - the exception handling
+ * around it must do that.
+ */
 #define __put_user_size_ex(x, ptr, size)				\
 do {									\
 	__chk_user_ptr(ptr);						\
@@ -358,9 +365,9 @@ do {									\
 } while (0)
 
 #define __get_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
-	asm volatile(ASM_STAC "\n"					\
+	asm volatile("\n"						\
 		     "1:	mov"itype" %2,%"rtype"1\n"		\
-		     "2: " ASM_CLAC "\n"				\
+		     "2:\n"						\
 		     ".section .fixup,\"ax\"\n"				\
 		     "3:	mov %3,%0\n"				\
 		     "	xor"itype" %"rtype"1,%"rtype"1\n"		\
@@ -370,6 +377,10 @@ do {									\
 		     : "=r" (err), ltype(x)				\
 		     : "m" (__m(addr)), "i" (errret), "0" (err))
 
+/*
+ * This doesn't do __uaccess_begin/end - the exception handling
+ * around it must do that.
+ */
 #define __get_user_size_ex(x, ptr, size)				\
 do {									\
 	__chk_user_ptr(ptr);						\
@@ -400,7 +411,9 @@ do {									\
 #define __put_user_nocheck(x, ptr, size)			\
 ({								\
 	int __pu_err;						\
+	__uaccess_begin();					\
 	__put_user_size((x), (ptr), (size), __pu_err, -EFAULT);	\
+	__uaccess_end();					\
 	__builtin_expect(__pu_err, 0);				\
 })
 
@@ -408,7 +421,9 @@ do {									\
 ({									\
 	int __gu_err;							\
 	unsigned long __gu_val;						\
+	__uaccess_begin();						\
 	__get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT);	\
+	__uaccess_end();						\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
 	__builtin_expect(__gu_err, 0);					\
 })
@@ -423,9 +438,9 @@ struct __large_struct { unsigned long buf[100]; };
  * aliasing issues.
  */
 #define __put_user_asm(x, addr, err, itype, rtype, ltype, errret)	\
-	asm volatile(ASM_STAC "\n"					\
+	asm volatile("\n"						\
 		     "1:	mov"itype" %"rtype"1,%2\n"		\
-		     "2: " ASM_CLAC "\n"				\
+		     "2:\n"						\
 		     ".section .fixup,\"ax\"\n"				\
 		     "3:	mov %3,%0\n"				\
 		     "	jmp 2b\n"					\
@@ -445,11 +460,11 @@ struct __large_struct { unsigned long buf[100]; };
  */
 #define uaccess_try	do {						\
 	current_thread_info()->uaccess_err = 0;				\
-	stac();								\
+	__uaccess_begin();						\
 	barrier();
 
 #define uaccess_catch(err)						\
-	clac();								\
+	__uaccess_end();						\
 	(err) |= (current_thread_info()->uaccess_err ? -EFAULT : 0);	\
 } while (0)
 
@@ -547,12 +562,13 @@ extern void __cmpxchg_wrong_size(void)
 	__typeof__(ptr) __uval = (uval);				\
 	__typeof__(*(ptr)) __old = (old);				\
 	__typeof__(*(ptr)) __new = (new);				\
+	__uaccess_begin();						\
 	switch (size) {							\
 	case 1:								\
 	{								\
-		asm volatile("\t" ASM_STAC "\n"				\
+		asm volatile("\n"					\
 			"1:\t" LOCK_PREFIX "cmpxchgb %4, %2\n"		\
-			"2:\t" ASM_CLAC "\n"				\
+			"2:\n"						\
 			"\t.section .fixup, \"ax\"\n"			\
 			"3:\tmov     %3, %0\n"				\
 			"\tjmp     2b\n"				\
@@ -566,9 +582,9 @@ extern void __cmpxchg_wrong_size(void)
 	}								\
 	case 2:								\
 	{								\
-		asm volatile("\t" ASM_STAC "\n"				\
+		asm volatile("\n"					\
 			"1:\t" LOCK_PREFIX "cmpxchgw %4, %2\n"		\
-			"2:\t" ASM_CLAC "\n"				\
+			"2:\n"						\
 			"\t.section .fixup, \"ax\"\n"			\
 			"3:\tmov     %3, %0\n"				\
 			"\tjmp     2b\n"				\
@@ -582,9 +598,9 @@ extern void __cmpxchg_wrong_size(void)
 	}								\
 	case 4:								\
 	{								\
-		asm volatile("\t" ASM_STAC "\n"				\
+		asm volatile("\n"					\
 			"1:\t" LOCK_PREFIX "cmpxchgl %4, %2\n"		\
-			"2:\t" ASM_CLAC "\n"				\
+			"2:\n"						\
 			"\t.section .fixup, \"ax\"\n"			\
 			"3:\tmov     %3, %0\n"				\
 			"\tjmp     2b\n"				\
@@ -601,9 +617,9 @@ extern void __cmpxchg_wrong_size(void)
 		if (!IS_ENABLED(CONFIG_X86_64))				\
 			__cmpxchg_wrong_size();				\
 									\
-		asm volatile("\t" ASM_STAC "\n"				\
+		asm volatile("\n"					\
 			"1:\t" LOCK_PREFIX "cmpxchgq %4, %2\n"		\
-			"2:\t" ASM_CLAC "\n"				\
+			"2:\n"						\
 			"\t.section .fixup, \"ax\"\n"			\
 			"3:\tmov     %3, %0\n"				\
 			"\tjmp     2b\n"				\
@@ -618,6 +634,7 @@ extern void __cmpxchg_wrong_size(void)
 	default:							\
 		__cmpxchg_wrong_size();					\
 	}								\
+	__uaccess_end();						\
 	*__uval = __old;						\
 	__ret;								\
 })
@@ -745,5 +762,39 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 #undef __copy_from_user_overflow
 #undef __copy_to_user_overflow
 
+/*
+ * We rely on the nested NMI work to allow atomic faults from the NMI path; the
+ * nested NMI paths are careful to preserve CR2.
+ *
+ * Caller must use pagefault_enable/disable, or run in interrupt context,
+ * and also do a uaccess_ok() check
+ */
+#define __copy_from_user_nmi __copy_from_user_inatomic
+
+/*
+ * The "unsafe" user accesses aren't really "unsafe", but the naming
+ * is a big fat warning: you have to not only do the access_ok()
+ * checking before using them, but you have to surround them with the
+ * user_access_begin/end() pair.
+ */
+#define user_access_begin()	__uaccess_begin()
+#define user_access_end()	__uaccess_end()
+
+#define unsafe_put_user(x, ptr)						\
+({										\
+	int __pu_err;								\
+	__put_user_size((x), (ptr), sizeof(*(ptr)), __pu_err, -EFAULT);		\
+	__builtin_expect(__pu_err, 0);						\
+})
+
+#define unsafe_get_user(x, ptr)						\
+({										\
+	int __gu_err;								\
+	unsigned long __gu_val;							\
+	__get_user_size(__gu_val, (ptr), sizeof(*(ptr)), __gu_err, -EFAULT);	\
+	(x) = (__force __typeof__(*(ptr)))__gu_val;				\
+	__builtin_expect(__gu_err, 0);						\
+})
+
 #endif /* _ASM_X86_UACCESS_H */
 
diff --git a/arch/x86/include/asm/uaccess_32.h b/arch/x86/include/asm/uaccess_32.h
index f5dcb5204dcd..3fe0eac59462 100644
--- a/arch/x86/include/asm/uaccess_32.h
+++ b/arch/x86/include/asm/uaccess_32.h
@@ -48,20 +48,28 @@ __copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__put_user_size(*(u8 *)from, (u8 __user *)to,
 					1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__put_user_size(*(u16 *)from, (u16 __user *)to,
 					2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__put_user_size(*(u32 *)from, (u32 __user *)to,
 					4, ret, 4);
+			__uaccess_end();
 			return ret;
 		case 8:
+			__uaccess_begin();
 			__put_user_size(*(u64 *)from, (u64 __user *)to,
 					8, ret, 8);
+			__uaccess_end();
 			return ret;
 		}
 	}
@@ -103,13 +111,19 @@ __copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			__uaccess_end();
 			return ret;
 		}
 	}
@@ -148,13 +162,19 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			__uaccess_end();
 			return ret;
 		}
 	}
@@ -170,13 +190,19 @@ static __always_inline unsigned long __copy_from_user_nocache(void *to,
 
 		switch (n) {
 		case 1:
+			__uaccess_begin();
 			__get_user_size(*(u8 *)to, from, 1, ret, 1);
+			__uaccess_end();
 			return ret;
 		case 2:
+			__uaccess_begin();
 			__get_user_size(*(u16 *)to, from, 2, ret, 2);
+			__uaccess_end();
 			return ret;
 		case 4:
+			__uaccess_begin();
 			__get_user_size(*(u32 *)to, from, 4, ret, 4);
+			__uaccess_end();
 			return ret;
 		}
 	}
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index f2f9b39b274a..307698688fa1 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -8,7 +8,7 @@
 #include <linux/errno.h>
 #include <linux/lockdep.h>
 #include <asm/alternative.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/page.h>
 
 /*
@@ -56,35 +56,49 @@ int __copy_from_user_nocheck(void *dst, const void __user *src, unsigned size)
 	if (!__builtin_constant_p(size))
 		return copy_user_generic(dst, (__force void *)src, size);
 	switch (size) {
-	case 1:__get_user_asm(*(u8 *)dst, (u8 __user *)src,
+	case 1:
+		__uaccess_begin();
+		__get_user_asm(*(u8 *)dst, (u8 __user *)src,
 			      ret, "b", "b", "=q", 1);
+		__uaccess_end();
 		return ret;
-	case 2:__get_user_asm(*(u16 *)dst, (u16 __user *)src,
+	case 2:
+		__uaccess_begin();
+		__get_user_asm(*(u16 *)dst, (u16 __user *)src,
 			      ret, "w", "w", "=r", 2);
+		__uaccess_end();
 		return ret;
-	case 4:__get_user_asm(*(u32 *)dst, (u32 __user *)src,
+	case 4:
+		__uaccess_begin();
+		__get_user_asm(*(u32 *)dst, (u32 __user *)src,
 			      ret, "l", "k", "=r", 4);
+		__uaccess_end();
 		return ret;
-	case 8:__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+	case 8:
+		__uaccess_begin();
+		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
 			      ret, "q", "", "=r", 8);
+		__uaccess_end();
 		return ret;
 	case 10:
+		__uaccess_begin();
 		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
 			       ret, "q", "", "=r", 10);
-		if (unlikely(ret))
-			return ret;
-		__get_user_asm(*(u16 *)(8 + (char *)dst),
-			       (u16 __user *)(8 + (char __user *)src),
-			       ret, "w", "w", "=r", 2);
+		if (likely(!ret))
+			__get_user_asm(*(u16 *)(8 + (char *)dst),
+				       (u16 __user *)(8 + (char __user *)src),
+				       ret, "w", "w", "=r", 2);
+		__uaccess_end();
 		return ret;
 	case 16:
+		__uaccess_begin();
 		__get_user_asm(*(u64 *)dst, (u64 __user *)src,
 			       ret, "q", "", "=r", 16);
-		if (unlikely(ret))
-			return ret;
-		__get_user_asm(*(u64 *)(8 + (char *)dst),
-			       (u64 __user *)(8 + (char __user *)src),
-			       ret, "q", "", "=r", 8);
+		if (likely(!ret))
+			__get_user_asm(*(u64 *)(8 + (char *)dst),
+				       (u64 __user *)(8 + (char __user *)src),
+				       ret, "q", "", "=r", 8);
+		__uaccess_end();
 		return ret;
 	default:
 		return copy_user_generic(dst, (__force void *)src, size);
@@ -106,35 +120,51 @@ int __copy_to_user_nocheck(void __user *dst, const void *src, unsigned size)
 	if (!__builtin_constant_p(size))
 		return copy_user_generic((__force void *)dst, src, size);
 	switch (size) {
-	case 1:__put_user_asm(*(u8 *)src, (u8 __user *)dst,
+	case 1:
+		__uaccess_begin();
+		__put_user_asm(*(u8 *)src, (u8 __user *)dst,
 			      ret, "b", "b", "iq", 1);
+		__uaccess_end();
 		return ret;
-	case 2:__put_user_asm(*(u16 *)src, (u16 __user *)dst,
+	case 2:
+		__uaccess_begin();
+		__put_user_asm(*(u16 *)src, (u16 __user *)dst,
 			      ret, "w", "w", "ir", 2);
+		__uaccess_end();
 		return ret;
-	case 4:__put_user_asm(*(u32 *)src, (u32 __user *)dst,
+	case 4:
+		__uaccess_begin();
+		__put_user_asm(*(u32 *)src, (u32 __user *)dst,
 			      ret, "l", "k", "ir", 4);
+		__uaccess_end();
 		return ret;
-	case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+	case 8:
+		__uaccess_begin();
+		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
 			      ret, "q", "", "er", 8);
+		__uaccess_end();
 		return ret;
 	case 10:
+		__uaccess_begin();
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
 			       ret, "q", "", "er", 10);
-		if (unlikely(ret))
-			return ret;
-		asm("":::"memory");
-		__put_user_asm(4[(u16 *)src], 4 + (u16 __user *)dst,
-			       ret, "w", "w", "ir", 2);
+		if (likely(!ret)) {
+			asm("":::"memory");
+			__put_user_asm(4[(u16 *)src], 4 + (u16 __user *)dst,
+				       ret, "w", "w", "ir", 2);
+		}
+		__uaccess_end();
 		return ret;
 	case 16:
+		__uaccess_begin();
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
 			       ret, "q", "", "er", 16);
-		if (unlikely(ret))
-			return ret;
-		asm("":::"memory");
-		__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
-			       ret, "q", "", "er", 8);
+		if (likely(!ret)) {
+			asm("":::"memory");
+			__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
+				       ret, "q", "", "er", 8);
+		}
+		__uaccess_end();
 		return ret;
 	default:
 		return copy_user_generic((__force void *)dst, src, size);
@@ -160,39 +190,47 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 	switch (size) {
 	case 1: {
 		u8 tmp;
+		__uaccess_begin();
 		__get_user_asm(tmp, (u8 __user *)src,
 			       ret, "b", "b", "=q", 1);
 		if (likely(!ret))
 			__put_user_asm(tmp, (u8 __user *)dst,
 				       ret, "b", "b", "iq", 1);
+		__uaccess_end();
 		return ret;
 	}
 	case 2: {
 		u16 tmp;
+		__uaccess_begin();
 		__get_user_asm(tmp, (u16 __user *)src,
 			       ret, "w", "w", "=r", 2);
 		if (likely(!ret))
 			__put_user_asm(tmp, (u16 __user *)dst,
 				       ret, "w", "w", "ir", 2);
+		__uaccess_end();
 		return ret;
 	}
 
 	case 4: {
 		u32 tmp;
+		__uaccess_begin();
 		__get_user_asm(tmp, (u32 __user *)src,
 			       ret, "l", "k", "=r", 4);
 		if (likely(!ret))
 			__put_user_asm(tmp, (u32 __user *)dst,
 				       ret, "l", "k", "ir", 4);
+		__uaccess_end();
 		return ret;
 	}
 	case 8: {
 		u64 tmp;
+		__uaccess_begin();
 		__get_user_asm(tmp, (u64 __user *)src,
 			       ret, "q", "", "=r", 8);
 		if (likely(!ret))
 			__put_user_asm(tmp, (u64 __user *)dst,
 				       ret, "q", "", "er", 8);
+		__uaccess_end();
 		return ret;
 	}
 	default:
diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h
index 756de9190aec..43dc55be524e 100644
--- a/arch/x86/include/asm/vdso.h
+++ b/arch/x86/include/asm/vdso.h
@@ -13,15 +13,13 @@ struct vdso_image {
 	void *data;
 	unsigned long size;   /* Always a multiple of PAGE_SIZE */
 
-	/* text_mapping.pages is big enough for data/size page pointers */
-	struct vm_special_mapping text_mapping;
-
 	unsigned long alt, alt_len;
 
 	long sym_vvar_start;  /* Negative offset to the vvar area */
 
 	long sym_vvar_page;
 	long sym_hpet_page;
+	long sym_pvclock_page;
 	long sym_VDSO32_NOTE_MASK;
 	long sym___kernel_sigreturn;
 	long sym___kernel_rt_sigreturn;
diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h
index f556c4843aa1..e728699db774 100644
--- a/arch/x86/include/asm/vgtod.h
+++ b/arch/x86/include/asm/vgtod.h
@@ -37,6 +37,12 @@ struct vsyscall_gtod_data {
 };
 extern struct vsyscall_gtod_data vsyscall_gtod_data;
 
+extern int vclocks_used;
+static inline bool vclock_was_used(int vclock)
+{
+	return READ_ONCE(vclocks_used) & (1 << vclock);
+}
+
 static inline unsigned gtod_read_begin(const struct vsyscall_gtod_data *s)
 {
 	unsigned ret;
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index aa336ff3e03e..14c63c7e8337 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -73,6 +73,7 @@
 #define SECONDARY_EXEC_ENABLE_PML               0x00020000
 #define SECONDARY_EXEC_XSAVES			0x00100000
 #define SECONDARY_EXEC_PCOMMIT			0x00200000
+#define SECONDARY_EXEC_TSC_SCALING              0x02000000
 
 #define PIN_BASED_EXT_INTR_MASK                 0x00000001
 #define PIN_BASED_NMI_EXITING                   0x00000008
@@ -167,6 +168,8 @@ enum vmcs_field {
 	VMWRITE_BITMAP                  = 0x00002028,
 	XSS_EXIT_BITMAP                 = 0x0000202C,
 	XSS_EXIT_BITMAP_HIGH            = 0x0000202D,
+	TSC_MULTIPLIER                  = 0x00002032,
+	TSC_MULTIPLIER_HIGH             = 0x00002033,
 	GUEST_PHYSICAL_ADDRESS          = 0x00002400,
 	GUEST_PHYSICAL_ADDRESS_HIGH     = 0x00002401,
 	VMCS_LINK_POINTER               = 0x00002800,
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 48d34d28f5a6..1ae89a2721d6 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_PLATFORM_H
 #define _ASM_X86_PLATFORM_H
 
-#include <asm/pgtable_types.h>
 #include <asm/bootparam.h>
 
 struct mpc_bus;
@@ -83,13 +82,11 @@ struct x86_init_paging {
  * struct x86_init_timers - platform specific timer setup
  * @setup_perpcu_clockev:	set up the per cpu clock event device for the
  *				boot cpu
- * @tsc_pre_init:		platform function called before TSC init
  * @timer_init:			initialize the platform timer (default PIT/HPET)
  * @wallclock_init:		init the wallclock device
  */
 struct x86_init_timers {
 	void (*setup_percpu_clockev)(void);
-	void (*tsc_pre_init)(void);
 	void (*timer_init)(void);
 	void (*wallclock_init)(void);
 };
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index 4c20dd333412..a12a047184ee 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -110,9 +110,10 @@ extern struct { char _entry[32]; } hypercall_page[];
 	register unsigned long __arg2 asm(__HYPERCALL_ARG2REG) = __arg2; \
 	register unsigned long __arg3 asm(__HYPERCALL_ARG3REG) = __arg3; \
 	register unsigned long __arg4 asm(__HYPERCALL_ARG4REG) = __arg4; \
-	register unsigned long __arg5 asm(__HYPERCALL_ARG5REG) = __arg5;
+	register unsigned long __arg5 asm(__HYPERCALL_ARG5REG) = __arg5; \
+	register void *__sp asm(_ASM_SP);
 
-#define __HYPERCALL_0PARAM	"=r" (__res)
+#define __HYPERCALL_0PARAM	"=r" (__res), "+r" (__sp)
 #define __HYPERCALL_1PARAM	__HYPERCALL_0PARAM, "+r" (__arg1)
 #define __HYPERCALL_2PARAM	__HYPERCALL_1PARAM, "+r" (__arg2)
 #define __HYPERCALL_3PARAM	__HYPERCALL_2PARAM, "+r" (__arg3)
@@ -310,10 +311,10 @@ HYPERVISOR_mca(struct xen_mc *mc_op)
 }
 
 static inline int
-HYPERVISOR_dom0_op(struct xen_platform_op *platform_op)
+HYPERVISOR_platform_op(struct xen_platform_op *op)
 {
-	platform_op->interface_version = XENPF_INTERFACE_VERSION;
-	return _hypercall1(int, dom0_op, platform_op);
+	op->interface_version = XENPF_INTERFACE_VERSION;
+	return _hypercall1(int, platform_op, op);
 }
 
 static inline int
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
index 8b2d4bea9962..39171b3646bb 100644
--- a/arch/x86/include/asm/xen/hypervisor.h
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -62,4 +62,6 @@ void xen_arch_register_cpu(int num);
 void xen_arch_unregister_cpu(int num);
 #endif
 
+extern void xen_set_iopl_mask(unsigned mask);
+
 #endif /* _ASM_X86_XEN_HYPERVISOR_H */
diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h
index 968d57dd54c9..f320ee32d5a1 100644
--- a/arch/x86/include/asm/xen/pci.h
+++ b/arch/x86/include/asm/xen/pci.h
@@ -57,7 +57,7 @@ static inline int xen_pci_frontend_enable_msi(struct pci_dev *dev,
 {
 	if (xen_pci_frontend && xen_pci_frontend->enable_msi)
 		return xen_pci_frontend->enable_msi(dev, vectors);
-	return -ENODEV;
+	return -ENOSYS;
 }
 static inline void xen_pci_frontend_disable_msi(struct pci_dev *dev)
 {
@@ -69,7 +69,7 @@ static inline int xen_pci_frontend_enable_msix(struct pci_dev *dev,
 {
 	if (xen_pci_frontend && xen_pci_frontend->enable_msix)
 		return xen_pci_frontend->enable_msix(dev, vectors, nvec);
-	return -ENODEV;
+	return -ENOSYS;
 }
 static inline void xen_pci_frontend_disable_msix(struct pci_dev *dev)
 {
diff --git a/arch/x86/include/asm/xor_32.h b/arch/x86/include/asm/xor_32.h
index 5a08bc8bff33..c54beb44c4c1 100644
--- a/arch/x86/include/asm/xor_32.h
+++ b/arch/x86/include/asm/xor_32.h
@@ -553,7 +553,7 @@ do {							\
 	if (cpu_has_xmm) {				\
 		xor_speed(&xor_block_pIII_sse);		\
 		xor_speed(&xor_block_sse_pf64);		\
-	} else if (cpu_has_mmx) {			\
+	} else if (boot_cpu_has(X86_FEATURE_MMX)) {	\
 		xor_speed(&xor_block_pII_mmx);		\
 		xor_speed(&xor_block_p5_mmx);		\
 	} else {					\
diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
index 040d4083c24f..9b1a91834ac8 100644
--- a/arch/x86/include/uapi/asm/hyperv.h
+++ b/arch/x86/include/uapi/asm/hyperv.h
@@ -226,7 +226,9 @@
 		(~((1ull << HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT) - 1))
 
 /* Declare the various hypercall operations. */
-#define HV_X64_HV_NOTIFY_LONG_SPIN_WAIT		0x0008
+#define HVCALL_NOTIFY_LONG_SPIN_WAIT		0x0008
+#define HVCALL_POST_MESSAGE			0x005c
+#define HVCALL_SIGNAL_EVENT			0x005d
 
 #define HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE		0x00000001
 #define HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT	12
@@ -269,4 +271,96 @@ typedef struct _HV_REFERENCE_TSC_PAGE {
 #define HV_SYNIC_SINT_AUTO_EOI		(1ULL << 17)
 #define HV_SYNIC_SINT_VECTOR_MASK	(0xFF)
 
+#define HV_SYNIC_STIMER_COUNT		(4)
+
+/* Define synthetic interrupt controller message constants. */
+#define HV_MESSAGE_SIZE			(256)
+#define HV_MESSAGE_PAYLOAD_BYTE_COUNT	(240)
+#define HV_MESSAGE_PAYLOAD_QWORD_COUNT	(30)
+
+/* Define hypervisor message types. */
+enum hv_message_type {
+	HVMSG_NONE			= 0x00000000,
+
+	/* Memory access messages. */
+	HVMSG_UNMAPPED_GPA		= 0x80000000,
+	HVMSG_GPA_INTERCEPT		= 0x80000001,
+
+	/* Timer notification messages. */
+	HVMSG_TIMER_EXPIRED			= 0x80000010,
+
+	/* Error messages. */
+	HVMSG_INVALID_VP_REGISTER_VALUE	= 0x80000020,
+	HVMSG_UNRECOVERABLE_EXCEPTION	= 0x80000021,
+	HVMSG_UNSUPPORTED_FEATURE		= 0x80000022,
+
+	/* Trace buffer complete messages. */
+	HVMSG_EVENTLOG_BUFFERCOMPLETE	= 0x80000040,
+
+	/* Platform-specific processor intercept messages. */
+	HVMSG_X64_IOPORT_INTERCEPT		= 0x80010000,
+	HVMSG_X64_MSR_INTERCEPT		= 0x80010001,
+	HVMSG_X64_CPUID_INTERCEPT		= 0x80010002,
+	HVMSG_X64_EXCEPTION_INTERCEPT	= 0x80010003,
+	HVMSG_X64_APIC_EOI			= 0x80010004,
+	HVMSG_X64_LEGACY_FP_ERROR		= 0x80010005
+};
+
+/* Define synthetic interrupt controller message flags. */
+union hv_message_flags {
+	__u8 asu8;
+	struct {
+		__u8 msg_pending:1;
+		__u8 reserved:7;
+	};
+};
+
+/* Define port identifier type. */
+union hv_port_id {
+	__u32 asu32;
+	struct {
+		__u32 id:24;
+		__u32 reserved:8;
+	} u;
+};
+
+/* Define synthetic interrupt controller message header. */
+struct hv_message_header {
+	__u32 message_type;
+	__u8 payload_size;
+	union hv_message_flags message_flags;
+	__u8 reserved[2];
+	union {
+		__u64 sender;
+		union hv_port_id port;
+	};
+};
+
+/* Define synthetic interrupt controller message format. */
+struct hv_message {
+	struct hv_message_header header;
+	union {
+		__u64 payload[HV_MESSAGE_PAYLOAD_QWORD_COUNT];
+	} u;
+};
+
+/* Define the synthetic interrupt message page layout. */
+struct hv_message_page {
+	struct hv_message sint_message[HV_SYNIC_SINT_COUNT];
+};
+
+/* Define timer message payload structure. */
+struct hv_timer_message_payload {
+	__u32 timer_index;
+	__u32 reserved;
+	__u64 expiration_time;	/* When the timer expired */
+	__u64 delivery_time;	/* When the message was delivered */
+};
+
+#define HV_STIMER_ENABLE		(1ULL << 0)
+#define HV_STIMER_PERIODIC		(1ULL << 1)
+#define HV_STIMER_LAZY			(1ULL << 2)
+#define HV_STIMER_AUTOENABLE		(1ULL << 3)
+#define HV_STIMER_SINT(config)		(__u8)(((config) >> 16) & 0x0F)
+
 #endif
diff --git a/arch/x86/include/uapi/asm/mce.h b/arch/x86/include/uapi/asm/mce.h
index 03429da2fa80..2184943341bf 100644
--- a/arch/x86/include/uapi/asm/mce.h
+++ b/arch/x86/include/uapi/asm/mce.h
@@ -16,7 +16,7 @@ struct mce {
 	__u8  cpuvendor;	/* cpu vendor as encoded in system.h */
 	__u8  inject_flags;	/* software inject flags */
 	__u8  severity;
-	__u8  usable_addr;
+	__u8  pad;
 	__u32 cpuid;	/* CPUID 1 EAX */
 	__u8  cs;		/* code segment */
 	__u8  bank;	/* machine check bank */
diff --git a/arch/x86/include/uapi/asm/mman.h b/arch/x86/include/uapi/asm/mman.h
index 513b05f15bb4..39bca7fac087 100644
--- a/arch/x86/include/uapi/asm/mman.h
+++ b/arch/x86/include/uapi/asm/mman.h
@@ -6,6 +6,28 @@
 #define MAP_HUGE_2MB    (21 << MAP_HUGE_SHIFT)
 #define MAP_HUGE_1GB    (30 << MAP_HUGE_SHIFT)
 
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+/*
+ * Take the 4 protection key bits out of the vma->vm_flags
+ * value and turn them in to the bits that we can put in
+ * to a pte.
+ *
+ * Only override these if Protection Keys are available
+ * (which is only on 64-bit).
+ */
+#define arch_vm_get_page_prot(vm_flags)	__pgprot(	\
+		((vm_flags) & VM_PKEY_BIT0 ? _PAGE_PKEY_BIT0 : 0) |	\
+		((vm_flags) & VM_PKEY_BIT1 ? _PAGE_PKEY_BIT1 : 0) |	\
+		((vm_flags) & VM_PKEY_BIT2 ? _PAGE_PKEY_BIT2 : 0) |	\
+		((vm_flags) & VM_PKEY_BIT3 ? _PAGE_PKEY_BIT3 : 0))
+
+#define arch_calc_vm_prot_bits(prot, key) (		\
+		((key) & 0x1 ? VM_PKEY_BIT0 : 0) |      \
+		((key) & 0x2 ? VM_PKEY_BIT1 : 0) |      \
+		((key) & 0x4 ? VM_PKEY_BIT2 : 0) |      \
+		((key) & 0x8 ? VM_PKEY_BIT3 : 0))
+#endif
+
 #include <asm-generic/mman.h>
 
 #endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/uapi/asm/processor-flags.h b/arch/x86/include/uapi/asm/processor-flags.h
index 79887abcb5e1..567de50a4c2a 100644
--- a/arch/x86/include/uapi/asm/processor-flags.h
+++ b/arch/x86/include/uapi/asm/processor-flags.h
@@ -118,6 +118,8 @@
 #define X86_CR4_SMEP		_BITUL(X86_CR4_SMEP_BIT)
 #define X86_CR4_SMAP_BIT	21 /* enable SMAP support */
 #define X86_CR4_SMAP		_BITUL(X86_CR4_SMAP_BIT)
+#define X86_CR4_PKE_BIT		22 /* enable Protection Keys support */
+#define X86_CR4_PKE		_BITUL(X86_CR4_PKE_BIT)
 
 /*
  * x86-64 Task Priority Register, CR8
diff --git a/arch/x86/include/uapi/asm/sigcontext.h b/arch/x86/include/uapi/asm/sigcontext.h
index d485232f1e9f..62d4111c1c54 100644
--- a/arch/x86/include/uapi/asm/sigcontext.h
+++ b/arch/x86/include/uapi/asm/sigcontext.h
@@ -256,7 +256,7 @@ struct sigcontext_64 {
 	__u16				cs;
 	__u16				gs;
 	__u16				fs;
-	__u16				__pad0;
+	__u16				ss;
 	__u64				err;
 	__u64				trapno;
 	__u64				oldmask;
@@ -341,9 +341,37 @@ struct sigcontext {
 	__u64				rip;
 	__u64				eflags;		/* RFLAGS */
 	__u16				cs;
+
+	/*
+	 * Prior to 2.5.64 ("[PATCH] x86-64 updates for 2.5.64-bk3"),
+	 * Linux saved and restored fs and gs in these slots.  This
+	 * was counterproductive, as fsbase and gsbase were never
+	 * saved, so arch_prctl was presumably unreliable.
+	 *
+	 * These slots should never be reused without extreme caution:
+	 *
+	 *  - Some DOSEMU versions stash fs and gs in these slots manually,
+	 *    thus overwriting anything the kernel expects to be preserved
+	 *    in these slots.
+	 *
+	 *  - If these slots are ever needed for any other purpose,
+	 *    there is some risk that very old 64-bit binaries could get
+	 *    confused.  I doubt that many such binaries still work,
+	 *    though, since the same patch in 2.5.64 also removed the
+	 *    64-bit set_thread_area syscall, so it appears that there
+	 *    is no TLS API beyond modify_ldt that works in both pre-
+	 *    and post-2.5.64 kernels.
+	 *
+	 * If the kernel ever adds explicit fs, gs, fsbase, and gsbase
+	 * save/restore, it will most likely need to be opt-in and use
+	 * different context slots.
+	 */
 	__u16				gs;
 	__u16				fs;
-	__u16				__pad0;
+	union {
+		__u16			ss;	/* If UC_SIGCONTEXT_SS */
+		__u16			__pad0;	/* Alias name for old (!UC_SIGCONTEXT_SS) user-space */
+	};
 	__u64				err;
 	__u64				trapno;
 	__u64				oldmask;
diff --git a/arch/x86/include/uapi/asm/svm.h b/arch/x86/include/uapi/asm/svm.h
index b5d7640abc5d..8a4add8e4639 100644
--- a/arch/x86/include/uapi/asm/svm.h
+++ b/arch/x86/include/uapi/asm/svm.h
@@ -100,6 +100,7 @@
 	{ SVM_EXIT_EXCP_BASE + UD_VECTOR,       "UD excp" }, \
 	{ SVM_EXIT_EXCP_BASE + PF_VECTOR,       "PF excp" }, \
 	{ SVM_EXIT_EXCP_BASE + NM_VECTOR,       "NM excp" }, \
+	{ SVM_EXIT_EXCP_BASE + AC_VECTOR,       "AC excp" }, \
 	{ SVM_EXIT_EXCP_BASE + MC_VECTOR,       "MC excp" }, \
 	{ SVM_EXIT_INTR,        "interrupt" }, \
 	{ SVM_EXIT_NMI,         "nmi" }, \
diff --git a/arch/x86/include/uapi/asm/ucontext.h b/arch/x86/include/uapi/asm/ucontext.h
index b7c29c8017f2..e3d1ec90616e 100644
--- a/arch/x86/include/uapi/asm/ucontext.h
+++ b/arch/x86/include/uapi/asm/ucontext.h
@@ -1,11 +1,54 @@
 #ifndef _ASM_X86_UCONTEXT_H
 #define _ASM_X86_UCONTEXT_H
 
-#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
-				 * information in the memory layout pointed
-				 * by the fpstate pointer in the ucontext's
-				 * sigcontext struct (uc_mcontext).
-				 */
+/*
+ * Indicates the presence of extended state information in the memory
+ * layout pointed by the fpstate pointer in the ucontext's sigcontext
+ * struct (uc_mcontext).
+ */
+#define UC_FP_XSTATE	0x1
+
+#ifdef __x86_64__
+/*
+ * UC_SIGCONTEXT_SS will be set when delivering 64-bit or x32 signals on
+ * kernels that save SS in the sigcontext.  All kernels that set
+ * UC_SIGCONTEXT_SS will correctly restore at least the low 32 bits of esp
+ * regardless of SS (i.e. they implement espfix).
+ *
+ * Kernels that set UC_SIGCONTEXT_SS will also set UC_STRICT_RESTORE_SS
+ * when delivering a signal that came from 64-bit code.
+ *
+ * Sigreturn restores SS as follows:
+ *
+ * if (saved SS is valid || UC_STRICT_RESTORE_SS is set ||
+ *     saved CS is not 64-bit)
+ *         new SS = saved SS  (will fail IRET and signal if invalid)
+ * else
+ *         new SS = a flat 32-bit data segment
+ *
+ * This behavior serves three purposes:
+ *
+ * - Legacy programs that construct a 64-bit sigcontext from scratch
+ *   with zero or garbage in the SS slot (e.g. old CRIU) and call
+ *   sigreturn will still work.
+ *
+ * - Old DOSEMU versions sometimes catch a signal from a segmented
+ *   context, delete the old SS segment (with modify_ldt), and change
+ *   the saved CS to a 64-bit segment.  These DOSEMU versions expect
+ *   sigreturn to send them back to 64-bit mode without killing them,
+ *   despite the fact that the SS selector when the signal was raised is
+ *   no longer valid.  UC_STRICT_RESTORE_SS will be clear, so the kernel
+ *   will fix up SS for these DOSEMU versions.
+ *
+ * - Old and new programs that catch a signal and return without
+ *   modifying the saved context will end up in exactly the state they
+ *   started in, even if they were running in a segmented context when
+ *   the signal was raised..  Old kernels would lose track of the
+ *   previous SS value.
+ */
+#define UC_SIGCONTEXT_SS	0x2
+#define UC_STRICT_RESTORE_SS	0x4
+#endif
 
 #include <asm-generic/ucontext.h>
 
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index b1b78ffe01d0..616ebd22ef9a 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -16,9 +16,21 @@ CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
 endif
 
-KASAN_SANITIZE_head$(BITS).o := n
-KASAN_SANITIZE_dumpstack.o := n
-KASAN_SANITIZE_dumpstack_$(BITS).o := n
+KASAN_SANITIZE_head$(BITS).o				:= n
+KASAN_SANITIZE_dumpstack.o				:= n
+KASAN_SANITIZE_dumpstack_$(BITS).o			:= n
+KASAN_SANITIZE_stacktrace.o := n
+
+OBJECT_FILES_NON_STANDARD_head_$(BITS).o		:= y
+OBJECT_FILES_NON_STANDARD_relocate_kernel_$(BITS).o	:= y
+OBJECT_FILES_NON_STANDARD_mcount_$(BITS).o		:= y
+OBJECT_FILES_NON_STANDARD_test_nx.o			:= y
+
+# If instrumentation of this dir is enabled, boot hangs during first second.
+# Probably could be more selective here, but note that files related to irqs,
+# boot, dumpstack/stacktrace, etc are either non-interesting or can lead to
+# non-deterministic coverage.
+KCOV_INSTRUMENT		:= n
 
 CFLAGS_irq.o := -I$(src)/../include/asm/trace
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index e75907601a41..8c2f1ef6ca23 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -956,7 +956,7 @@ static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
 
 	/*
 	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
-	 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+	 * and (optionally) overridden by a LAPIC_ADDR_OVR entry (64-bit value).
 	 */
 
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
@@ -984,7 +984,7 @@ static int __init acpi_parse_madt_lapic_entries(void)
 
 	/*
 	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
-	 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+	 * and (optionally) overridden by a LAPIC_ADDR_OVR entry (64-bit value).
 	 */
 
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index d1daead5fcdd..adb3eaf8fe2a 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -16,6 +16,7 @@
 #include <asm/cacheflush.h>
 #include <asm/realmode.h>
 
+#include <linux/ftrace.h>
 #include "../../realmode/rm/wakeup.h"
 #include "sleep.h"
 
@@ -107,7 +108,13 @@ int x86_acpi_suspend_lowlevel(void)
        saved_magic = 0x123456789abcdef0L;
 #endif /* CONFIG_64BIT */
 
+	/*
+	 * Pause/unpause graph tracing around do_suspend_lowlevel as it has
+	 * inconsistent call/return info after it jumps to the wakeup vector.
+	 */
+	pause_graph_tracing();
 	do_suspend_lowlevel();
+	unpause_graph_tracing();
 	return 0;
 }
 
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 8c35df468104..169963f471bb 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -5,6 +5,7 @@
 #include <asm/page_types.h>
 #include <asm/msr.h>
 #include <asm/asm-offsets.h>
+#include <asm/frame.h>
 
 # Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
 
@@ -39,6 +40,7 @@ bogus_64_magic:
 	jmp	bogus_64_magic
 
 ENTRY(do_suspend_lowlevel)
+	FRAME_BEGIN
 	subq	$8, %rsp
 	xorl	%eax, %eax
 	call	save_processor_state
@@ -109,6 +111,7 @@ ENTRY(do_suspend_lowlevel)
 
 	xorl	%eax, %eax
 	addq	$8, %rsp
+	FRAME_END
 	jmp	restore_processor_state
 ENDPROC(do_suspend_lowlevel)
 
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 29fa475ec518..a147e676fc7b 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -170,15 +170,13 @@ int amd_get_subcaches(int cpu)
 {
 	struct pci_dev *link = node_to_amd_nb(amd_get_nb_id(cpu))->link;
 	unsigned int mask;
-	int cuid;
 
 	if (!amd_nb_has_feature(AMD_NB_L3_PARTITIONING))
 		return 0;
 
 	pci_read_config_dword(link, 0x1d4, &mask);
 
-	cuid = cpu_data(cpu).compute_unit_id;
-	return (mask >> (4 * cuid)) & 0xf;
+	return (mask >> (4 * cpu_data(cpu).cpu_core_id)) & 0xf;
 }
 
 int amd_set_subcaches(int cpu, unsigned long mask)
@@ -204,7 +202,7 @@ int amd_set_subcaches(int cpu, unsigned long mask)
 		pci_write_config_dword(nb->misc, 0x1b8, reg & ~0x180000);
 	}
 
-	cuid = cpu_data(cpu).compute_unit_id;
+	cuid = cpu_data(cpu).cpu_core_id;
 	mask <<= 4 * cuid;
 	mask |= (0xf ^ (1 << cuid)) << 26;
 
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 222a57076039..cefacbad1531 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -221,7 +221,7 @@ static int apbt_cpuhp_notify(struct notifier_block *n,
 	unsigned long cpu = (unsigned long)hcpu;
 	struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu);
 
-	switch (action & 0xf) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_DEAD:
 		dw_apb_clockevent_pause(adev->timer);
 		if (system_state == SYSTEM_RUNNING) {
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 6e85f713641d..0a2bb1f62e72 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -227,19 +227,11 @@ static u32 __init search_agp_bridge(u32 *order, int *valid_agp)
 	return 0;
 }
 
-static int gart_fix_e820 __initdata = 1;
+static bool gart_fix_e820 __initdata = true;
 
 static int __init parse_gart_mem(char *p)
 {
-	if (!p)
-		return -EINVAL;
-
-	if (!strncmp(p, "off", 3))
-		gart_fix_e820 = 0;
-	else if (!strncmp(p, "on", 2))
-		gart_fix_e820 = 1;
-
-	return 0;
+	return kstrtobool(p, &gart_fix_e820);
 }
 early_param("gart_fix_e820", parse_gart_mem);
 
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 8bb12ddc5db8..8e63ebdcbd0b 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -2,6 +2,10 @@
 # Makefile for local APIC drivers and for the IO-APIC code
 #
 
+# Leads to non-deterministic coverage that is not a function of syscall inputs.
+# In particualr, smp_apic_timer_interrupt() is called in random places.
+KCOV_INSTRUMENT		:= n
+
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o ipi.o vector.o
 obj-y				+= hw_nmi.o
 
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 2f69e3b184f6..d356987a04e9 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -82,6 +82,12 @@ physid_mask_t phys_cpu_present_map;
 static unsigned int disabled_cpu_apicid __read_mostly = BAD_APICID;
 
 /*
+ * This variable controls which CPUs receive external NMIs.  By default,
+ * external NMIs are delivered only to the BSP.
+ */
+static int apic_extnmi = APIC_EXTNMI_BSP;
+
+/*
  * Map cpu index to physical APIC ID
  */
 DEFINE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_cpu_to_apicid, BAD_APICID);
@@ -1161,6 +1167,8 @@ void __init init_bsp_APIC(void)
 	value = APIC_DM_NMI;
 	if (!lapic_is_integrated())		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
+	if (apic_extnmi == APIC_EXTNMI_NONE)
+		value |= APIC_LVT_MASKED;
 	apic_write(APIC_LVT1, value);
 }
 
@@ -1378,9 +1386,11 @@ void setup_local_APIC(void)
 	apic_write(APIC_LVT0, value);
 
 	/*
-	 * only the BP should see the LINT1 NMI signal, obviously.
+	 * Only the BSP sees the LINT1 NMI signal by default. This can be
+	 * modified by apic_extnmi= boot option.
 	 */
-	if (!cpu)
+	if ((!cpu && apic_extnmi != APIC_EXTNMI_NONE) ||
+	    apic_extnmi == APIC_EXTNMI_ALL)
 		value = APIC_DM_NMI;
 	else
 		value = APIC_DM_NMI | APIC_LVT_MASKED;
@@ -1601,7 +1611,7 @@ void __init enable_IR_x2apic(void)
 	legacy_pic->mask_all();
 	mask_ioapic_entries();
 
-	/* If irq_remapping_prepare() succeded, try to enable it */
+	/* If irq_remapping_prepare() succeeded, try to enable it */
 	if (ir_stat >= 0)
 		ir_stat = try_to_enable_IR();
 	/* ir_stat contains the remap mode or an error code */
@@ -2068,6 +2078,20 @@ int generic_processor_info(int apicid, int version)
 		cpu = cpumask_next_zero(-1, cpu_present_mask);
 
 	/*
+	 * This can happen on physical hotplug. The sanity check at boot time
+	 * is done from native_smp_prepare_cpus() after num_possible_cpus() is
+	 * established.
+	 */
+	if (topology_update_package_map(apicid, cpu) < 0) {
+		int thiscpu = max + disabled_cpus;
+
+		pr_warning("ACPI: Package limit reached. Processor %d/0x%x ignored.\n",
+			   thiscpu, apicid);
+		disabled_cpus++;
+		return -ENOSPC;
+	}
+
+	/*
 	 * Validate version
 	 */
 	if (version == 0x0) {
@@ -2270,6 +2294,7 @@ static struct {
 	unsigned int apic_tmict;
 	unsigned int apic_tdcr;
 	unsigned int apic_thmr;
+	unsigned int apic_cmci;
 } apic_pm_state;
 
 static int lapic_suspend(void)
@@ -2299,6 +2324,10 @@ static int lapic_suspend(void)
 	if (maxlvt >= 5)
 		apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
 #endif
+#ifdef CONFIG_X86_MCE_INTEL
+	if (maxlvt >= 6)
+		apic_pm_state.apic_cmci = apic_read(APIC_LVTCMCI);
+#endif
 
 	local_irq_save(flags);
 	disable_local_APIC();
@@ -2355,10 +2384,14 @@ static void lapic_resume(void)
 	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
 	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
 	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#if defined(CONFIG_X86_MCE_INTEL)
+#ifdef CONFIG_X86_THERMAL_VECTOR
 	if (maxlvt >= 5)
 		apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
 #endif
+#ifdef CONFIG_X86_MCE_INTEL
+	if (maxlvt >= 6)
+		apic_write(APIC_LVTCMCI, apic_pm_state.apic_cmci);
+#endif
 	if (maxlvt >= 4)
 		apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
 	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
@@ -2548,3 +2581,23 @@ static int __init apic_set_disabled_cpu_apicid(char *arg)
 	return 0;
 }
 early_param("disable_cpu_apicid", apic_set_disabled_cpu_apicid);
+
+static int __init apic_set_extnmi(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (!strncmp("all", arg, 3))
+		apic_extnmi = APIC_EXTNMI_ALL;
+	else if (!strncmp("none", arg, 4))
+		apic_extnmi = APIC_EXTNMI_NONE;
+	else if (!strncmp("bsp", arg, 3))
+		apic_extnmi = APIC_EXTNMI_BSP;
+	else {
+		pr_warn("Unknown external NMI delivery mode `%s' ignored\n", arg);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+early_param("apic_extnmi", apic_set_extnmi);
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index f92ab36979a2..76f89e2b245a 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -53,7 +53,7 @@ void flat_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static inline void _flat_send_IPI_mask(unsigned long mask, int vector)
+static void _flat_send_IPI_mask(unsigned long mask, int vector)
 {
 	unsigned long flags;
 
@@ -185,6 +185,7 @@ static struct apic apic_flat =  {
 
 	.cpu_mask_to_apicid_and		= flat_cpu_mask_to_apicid_and,
 
+	.send_IPI			= default_send_IPI_single,
 	.send_IPI_mask			= flat_send_IPI_mask,
 	.send_IPI_mask_allbutself	= flat_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= flat_send_IPI_allbutself,
@@ -230,17 +231,6 @@ static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return 0;
 }
 
-static void physflat_send_IPI_mask(const struct cpumask *cpumask, int vector)
-{
-	default_send_IPI_mask_sequence_phys(cpumask, vector);
-}
-
-static void physflat_send_IPI_mask_allbutself(const struct cpumask *cpumask,
-					      int vector)
-{
-	default_send_IPI_mask_allbutself_phys(cpumask, vector);
-}
-
 static void physflat_send_IPI_allbutself(int vector)
 {
 	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
@@ -248,7 +238,7 @@ static void physflat_send_IPI_allbutself(int vector)
 
 static void physflat_send_IPI_all(int vector)
 {
-	physflat_send_IPI_mask(cpu_online_mask, vector);
+	default_send_IPI_mask_sequence_phys(cpu_online_mask, vector);
 }
 
 static int physflat_probe(void)
@@ -292,8 +282,9 @@ static struct apic apic_physflat =  {
 
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= physflat_send_IPI_mask,
-	.send_IPI_mask_allbutself	= physflat_send_IPI_mask_allbutself,
+	.send_IPI			= default_send_IPI_single_phys,
+	.send_IPI_mask			= default_send_IPI_mask_sequence_phys,
+	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_phys,
 	.send_IPI_allbutself		= physflat_send_IPI_allbutself,
 	.send_IPI_all			= physflat_send_IPI_all,
 	.send_IPI_self			= apic_send_IPI_self,
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index 0d96749cfcac..331a7a07c48f 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -30,6 +30,7 @@
 #include <asm/e820.h>
 
 static void noop_init_apic_ldr(void) { }
+static void noop_send_IPI(int cpu, int vector) { }
 static void noop_send_IPI_mask(const struct cpumask *cpumask, int vector) { }
 static void noop_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector) { }
 static void noop_send_IPI_allbutself(int vector) { }
@@ -144,6 +145,7 @@ struct apic apic_noop = {
 
 	.cpu_mask_to_apicid_and		= flat_cpu_mask_to_apicid_and,
 
+	.send_IPI			= noop_send_IPI,
 	.send_IPI_mask			= noop_send_IPI_mask,
 	.send_IPI_mask_allbutself	= noop_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= noop_send_IPI_allbutself,
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 38dd5efdd04c..ab5c2c685a3c 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -30,7 +30,7 @@ static unsigned int numachip1_get_apic_id(unsigned long x)
 	unsigned long value;
 	unsigned int id = (x >> 24) & 0xff;
 
-	if (static_cpu_has_safe(X86_FEATURE_NODEID_MSR)) {
+	if (static_cpu_has(X86_FEATURE_NODEID_MSR)) {
 		rdmsrl(MSR_FAM10H_NODE_ID, value);
 		id |= (value << 2) & 0xff00;
 	}
@@ -178,7 +178,7 @@ static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
 	this_cpu_write(cpu_llc_id, node);
 
 	/* Account for nodes per socket in multi-core-module processors */
-	if (static_cpu_has_safe(X86_FEATURE_NODEID_MSR)) {
+	if (static_cpu_has(X86_FEATURE_NODEID_MSR)) {
 		rdmsrl(MSR_FAM10H_NODE_ID, val);
 		nodes = ((val >> 3) & 7) + 1;
 	}
@@ -193,20 +193,17 @@ static int __init numachip_system_init(void)
 	case 1:
 		init_extra_mapping_uc(NUMACHIP_LCSR_BASE, NUMACHIP_LCSR_SIZE);
 		numachip_apic_icr_write = numachip1_apic_icr_write;
-		x86_init.pci.arch_init = pci_numachip_init;
 		break;
 	case 2:
 		init_extra_mapping_uc(NUMACHIP2_LCSR_BASE, NUMACHIP2_LCSR_SIZE);
 		numachip_apic_icr_write = numachip2_apic_icr_write;
-
-		/* Use MCFG config cycles rather than locked CF8 cycles */
-		raw_pci_ops = &pci_mmcfg;
 		break;
 	default:
 		return 0;
 	}
 
 	x86_cpuinit.fixup_cpu_id = fixup_cpu_id;
+	x86_init.pci.arch_init = pci_numachip_init;
 
 	return 0;
 }
@@ -276,6 +273,7 @@ static const struct apic apic_numachip1 __refconst = {
 
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
+	.send_IPI			= numachip_send_IPI_one,
 	.send_IPI_mask			= numachip_send_IPI_mask,
 	.send_IPI_mask_allbutself	= numachip_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= numachip_send_IPI_allbutself,
@@ -327,6 +325,7 @@ static const struct apic apic_numachip2 __refconst = {
 
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
+	.send_IPI			= numachip_send_IPI_one,
 	.send_IPI_mask			= numachip_send_IPI_mask,
 	.send_IPI_mask_allbutself	= numachip_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= numachip_send_IPI_allbutself,
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 971cf8875939..cf9bd896c12d 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -96,11 +96,6 @@ static int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
 	return cpuid_apic >> index_msb;
 }
 
-static inline void bigsmp_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence_phys(mask, vector);
-}
-
 static void bigsmp_send_IPI_allbutself(int vector)
 {
 	default_send_IPI_mask_allbutself_phys(cpu_online_mask, vector);
@@ -108,7 +103,7 @@ static void bigsmp_send_IPI_allbutself(int vector)
 
 static void bigsmp_send_IPI_all(int vector)
 {
-	bigsmp_send_IPI_mask(cpu_online_mask, vector);
+	default_send_IPI_mask_sequence_phys(cpu_online_mask, vector);
 }
 
 static int dmi_bigsmp; /* can be set by dmi scanners */
@@ -180,7 +175,8 @@ static struct apic apic_bigsmp = {
 
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
-	.send_IPI_mask			= bigsmp_send_IPI_mask,
+	.send_IPI			= default_send_IPI_single_phys,
+	.send_IPI_mask			= default_send_IPI_mask_sequence_phys,
 	.send_IPI_mask_allbutself	= NULL,
 	.send_IPI_allbutself		= bigsmp_send_IPI_allbutself,
 	.send_IPI_all			= bigsmp_send_IPI_all,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index f25321894ad2..fdb0fbfb1197 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2521,6 +2521,7 @@ void __init setup_ioapic_dest(void)
 {
 	int pin, ioapic, irq, irq_entry;
 	const struct cpumask *mask;
+	struct irq_desc *desc;
 	struct irq_data *idata;
 	struct irq_chip *chip;
 
@@ -2536,7 +2537,9 @@ void __init setup_ioapic_dest(void)
 		if (irq < 0 || !mp_init_irq_at_boot(ioapic, irq))
 			continue;
 
-		idata = irq_get_irq_data(irq);
+		desc = irq_to_desc(irq);
+		raw_spin_lock_irq(&desc->lock);
+		idata = irq_desc_get_irq_data(desc);
 
 		/*
 		 * Honour affinities which have been set in early boot
@@ -2550,6 +2553,7 @@ void __init setup_ioapic_dest(void)
 		/* Might be lapic_chip for irq 0 */
 		if (chip->irq_set_affinity)
 			chip->irq_set_affinity(idata, mask, false);
+		raw_spin_unlock_irq(&desc->lock);
 	}
 }
 #endif
diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index 62071569bd50..28bde88b0085 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -18,6 +18,76 @@
 #include <asm/proto.h>
 #include <asm/ipi.h>
 
+void __default_send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest)
+{
+	/*
+	 * Subtle. In the case of the 'never do double writes' workaround
+	 * we have to lock out interrupts to be safe.  As we don't care
+	 * of the value read we use an atomic rmw access to avoid costly
+	 * cli/sti.  Otherwise we use an even cheaper single atomic write
+	 * to the APIC.
+	 */
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	__xapic_wait_icr_idle();
+
+	/*
+	 * No need to touch the target chip field
+	 */
+	cfg = __prepare_ICR(shortcut, vector, dest);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	native_apic_mem_write(APIC_ICR, cfg);
+}
+
+/*
+ * This is used to send an IPI with no shorthand notation (the destination is
+ * specified in bits 56 to 63 of the ICR).
+ */
+void __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest)
+{
+	unsigned long cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	if (unlikely(vector == NMI_VECTOR))
+		safe_apic_wait_icr_idle();
+	else
+		__xapic_wait_icr_idle();
+
+	/*
+	 * prepare target chip field
+	 */
+	cfg = __prepare_ICR2(mask);
+	native_apic_mem_write(APIC_ICR2, cfg);
+
+	/*
+	 * program the ICR
+	 */
+	cfg = __prepare_ICR(0, vector, dest);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	native_apic_mem_write(APIC_ICR, cfg);
+}
+
+void default_send_IPI_single_phys(int cpu, int vector)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__default_send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, cpu),
+				      vector, APIC_DEST_PHYSICAL);
+	local_irq_restore(flags);
+}
+
 void default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector)
 {
 	unsigned long query_cpu;
@@ -55,6 +125,14 @@ void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask,
 	local_irq_restore(flags);
 }
 
+/*
+ * Helper function for APICs which insist on cpumasks
+ */
+void default_send_IPI_single(int cpu, int vector)
+{
+	apic->send_IPI_mask(cpumask_of(cpu), vector);
+}
+
 #ifdef CONFIG_X86_32
 
 void default_send_IPI_mask_sequence_logical(const struct cpumask *mask,
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index 5f1feb6854af..ade25320df96 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -96,8 +96,8 @@ static irq_hw_number_t pci_msi_get_hwirq(struct msi_domain_info *info,
 	return arg->msi_hwirq;
 }
 
-static int pci_msi_prepare(struct irq_domain *domain, struct device *dev,
-			   int nvec, msi_alloc_info_t *arg)
+int pci_msi_prepare(struct irq_domain *domain, struct device *dev, int nvec,
+		    msi_alloc_info_t *arg)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct msi_desc *desc = first_pci_msi_entry(pdev);
@@ -113,11 +113,13 @@ static int pci_msi_prepare(struct irq_domain *domain, struct device *dev,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(pci_msi_prepare);
 
-static void pci_msi_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc)
+void pci_msi_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc)
 {
 	arg->msi_hwirq = pci_msi_domain_calc_hwirq(arg->msi_dev, desc);
 }
+EXPORT_SYMBOL_GPL(pci_msi_set_desc);
 
 static struct msi_domain_ops pci_msi_domain_ops = {
 	.get_hwirq	= pci_msi_get_hwirq,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 7694ae6c1199..f316e34abb42 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -105,6 +105,7 @@ static struct apic apic_default = {
 
 	.cpu_mask_to_apicid_and		= flat_cpu_mask_to_apicid_and,
 
+	.send_IPI			= default_send_IPI_single,
 	.send_IPI_mask			= default_send_IPI_mask_logical,
 	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_logical,
 	.send_IPI_allbutself		= default_send_IPI_allbutself,
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 836d11b92811..ad59d70bcb1a 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -29,8 +29,9 @@ struct apic_chip_data {
 };
 
 struct irq_domain *x86_vector_domain;
+EXPORT_SYMBOL_GPL(x86_vector_domain);
 static DEFINE_RAW_SPINLOCK(vector_lock);
-static cpumask_var_t vector_cpumask;
+static cpumask_var_t vector_cpumask, vector_searchmask, searched_cpumask;
 static struct irq_chip lapic_controller;
 #ifdef	CONFIG_X86_IO_APIC
 static struct apic_chip_data *legacy_irq_data[NR_IRQS_LEGACY];
@@ -66,6 +67,7 @@ struct irq_cfg *irqd_cfg(struct irq_data *irq_data)
 
 	return data ? &data->cfg : NULL;
 }
+EXPORT_SYMBOL_GPL(irqd_cfg);
 
 struct irq_cfg *irq_cfg(unsigned int irq)
 {
@@ -116,35 +118,47 @@ static int __assign_irq_vector(int irq, struct apic_chip_data *d,
 	 */
 	static int current_vector = FIRST_EXTERNAL_VECTOR + VECTOR_OFFSET_START;
 	static int current_offset = VECTOR_OFFSET_START % 16;
-	int cpu, err;
+	int cpu, vector;
 
-	if (d->move_in_progress)
+	/*
+	 * If there is still a move in progress or the previous move has not
+	 * been cleaned up completely, tell the caller to come back later.
+	 */
+	if (d->move_in_progress ||
+	    cpumask_intersects(d->old_domain, cpu_online_mask))
 		return -EBUSY;
 
 	/* Only try and allocate irqs on cpus that are present */
-	err = -ENOSPC;
 	cpumask_clear(d->old_domain);
+	cpumask_clear(searched_cpumask);
 	cpu = cpumask_first_and(mask, cpu_online_mask);
 	while (cpu < nr_cpu_ids) {
-		int new_cpu, vector, offset;
+		int new_cpu, offset;
 
+		/* Get the possible target cpus for @mask/@cpu from the apic */
 		apic->vector_allocation_domain(cpu, vector_cpumask, mask);
 
+		/*
+		 * Clear the offline cpus from @vector_cpumask for searching
+		 * and verify whether the result overlaps with @mask. If true,
+		 * then the call to apic->cpu_mask_to_apicid_and() will
+		 * succeed as well. If not, no point in trying to find a
+		 * vector in this mask.
+		 */
+		cpumask_and(vector_searchmask, vector_cpumask, cpu_online_mask);
+		if (!cpumask_intersects(vector_searchmask, mask))
+			goto next_cpu;
+
 		if (cpumask_subset(vector_cpumask, d->domain)) {
-			err = 0;
 			if (cpumask_equal(vector_cpumask, d->domain))
-				break;
+				goto success;
 			/*
-			 * New cpumask using the vector is a proper subset of
-			 * the current in use mask. So cleanup the vector
-			 * allocation for the members that are not used anymore.
+			 * Mark the cpus which are not longer in the mask for
+			 * cleanup.
 			 */
-			cpumask_andnot(d->old_domain, d->domain,
-				       vector_cpumask);
-			d->move_in_progress =
-			   cpumask_intersects(d->old_domain, cpu_online_mask);
-			cpumask_and(d->domain, d->domain, vector_cpumask);
-			break;
+			cpumask_andnot(d->old_domain, d->domain, vector_cpumask);
+			vector = d->cfg.vector;
+			goto update;
 		}
 
 		vector = current_vector;
@@ -156,45 +170,61 @@ next:
 			vector = FIRST_EXTERNAL_VECTOR + offset;
 		}
 
-		if (unlikely(current_vector == vector)) {
-			cpumask_or(d->old_domain, d->old_domain,
-				   vector_cpumask);
-			cpumask_andnot(vector_cpumask, mask, d->old_domain);
-			cpu = cpumask_first_and(vector_cpumask,
-						cpu_online_mask);
-			continue;
-		}
+		/* If the search wrapped around, try the next cpu */
+		if (unlikely(current_vector == vector))
+			goto next_cpu;
 
 		if (test_bit(vector, used_vectors))
 			goto next;
 
-		for_each_cpu_and(new_cpu, vector_cpumask, cpu_online_mask) {
+		for_each_cpu(new_cpu, vector_searchmask) {
 			if (!IS_ERR_OR_NULL(per_cpu(vector_irq, new_cpu)[vector]))
 				goto next;
 		}
 		/* Found one! */
 		current_vector = vector;
 		current_offset = offset;
-		if (d->cfg.vector) {
+		/* Schedule the old vector for cleanup on all cpus */
+		if (d->cfg.vector)
 			cpumask_copy(d->old_domain, d->domain);
-			d->move_in_progress =
-			   cpumask_intersects(d->old_domain, cpu_online_mask);
-		}
-		for_each_cpu_and(new_cpu, vector_cpumask, cpu_online_mask)
+		for_each_cpu(new_cpu, vector_searchmask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq_to_desc(irq);
-		d->cfg.vector = vector;
-		cpumask_copy(d->domain, vector_cpumask);
-		err = 0;
-		break;
-	}
+		goto update;
 
-	if (!err) {
-		/* cache destination APIC IDs into cfg->dest_apicid */
-		err = apic->cpu_mask_to_apicid_and(mask, d->domain,
-						   &d->cfg.dest_apicid);
+next_cpu:
+		/*
+		 * We exclude the current @vector_cpumask from the requested
+		 * @mask and try again with the next online cpu in the
+		 * result. We cannot modify @mask, so we use @vector_cpumask
+		 * as a temporary buffer here as it will be reassigned when
+		 * calling apic->vector_allocation_domain() above.
+		 */
+		cpumask_or(searched_cpumask, searched_cpumask, vector_cpumask);
+		cpumask_andnot(vector_cpumask, mask, searched_cpumask);
+		cpu = cpumask_first_and(vector_cpumask, cpu_online_mask);
+		continue;
 	}
+	return -ENOSPC;
 
-	return err;
+update:
+	/*
+	 * Exclude offline cpus from the cleanup mask and set the
+	 * move_in_progress flag when the result is not empty.
+	 */
+	cpumask_and(d->old_domain, d->old_domain, cpu_online_mask);
+	d->move_in_progress = !cpumask_empty(d->old_domain);
+	d->cfg.old_vector = d->move_in_progress ? d->cfg.vector : 0;
+	d->cfg.vector = vector;
+	cpumask_copy(d->domain, vector_cpumask);
+success:
+	/*
+	 * Cache destination APIC IDs into cfg->dest_apicid. This cannot fail
+	 * as we already established, that mask & d->domain & cpu_online_mask
+	 * is not empty.
+	 */
+	BUG_ON(apic->cpu_mask_to_apicid_and(mask, d->domain,
+					    &d->cfg.dest_apicid));
+	return 0;
 }
 
 static int assign_irq_vector(int irq, struct apic_chip_data *data,
@@ -224,10 +254,8 @@ static int assign_irq_vector_policy(int irq, int node,
 static void clear_irq_vector(int irq, struct apic_chip_data *data)
 {
 	struct irq_desc *desc;
-	unsigned long flags;
 	int cpu, vector;
 
-	raw_spin_lock_irqsave(&vector_lock, flags);
 	BUG_ON(!data->cfg.vector);
 
 	vector = data->cfg.vector;
@@ -237,10 +265,13 @@ static void clear_irq_vector(int irq, struct apic_chip_data *data)
 	data->cfg.vector = 0;
 	cpumask_clear(data->domain);
 
-	if (likely(!data->move_in_progress)) {
-		raw_spin_unlock_irqrestore(&vector_lock, flags);
+	/*
+	 * If move is in progress or the old_domain mask is not empty,
+	 * i.e. the cleanup IPI has not been processed yet, we need to remove
+	 * the old references to desc from all cpus vector tables.
+	 */
+	if (!data->move_in_progress && cpumask_empty(data->old_domain))
 		return;
-	}
 
 	desc = irq_to_desc(irq);
 	for_each_cpu_and(cpu, data->old_domain, cpu_online_mask) {
@@ -253,7 +284,6 @@ static void clear_irq_vector(int irq, struct apic_chip_data *data)
 		}
 	}
 	data->move_in_progress = 0;
-	raw_spin_unlock_irqrestore(&vector_lock, flags);
 }
 
 void init_irq_alloc_info(struct irq_alloc_info *info,
@@ -274,19 +304,24 @@ void copy_irq_alloc_info(struct irq_alloc_info *dst, struct irq_alloc_info *src)
 static void x86_vector_free_irqs(struct irq_domain *domain,
 				 unsigned int virq, unsigned int nr_irqs)
 {
+	struct apic_chip_data *apic_data;
 	struct irq_data *irq_data;
+	unsigned long flags;
 	int i;
 
 	for (i = 0; i < nr_irqs; i++) {
 		irq_data = irq_domain_get_irq_data(x86_vector_domain, virq + i);
 		if (irq_data && irq_data->chip_data) {
+			raw_spin_lock_irqsave(&vector_lock, flags);
 			clear_irq_vector(virq + i, irq_data->chip_data);
-			free_apic_chip_data(irq_data->chip_data);
+			apic_data = irq_data->chip_data;
+			irq_domain_reset_irq_data(irq_data);
+			raw_spin_unlock_irqrestore(&vector_lock, flags);
+			free_apic_chip_data(apic_data);
 #ifdef	CONFIG_X86_IO_APIC
 			if (virq + i < nr_legacy_irqs())
 				legacy_irq_data[virq + i] = NULL;
 #endif
-			irq_domain_reset_irq_data(irq_data);
 		}
 	}
 }
@@ -361,7 +396,11 @@ int __init arch_probe_nr_irqs(void)
 	if (nr < nr_irqs)
 		nr_irqs = nr;
 
-	return nr_legacy_irqs();
+	/*
+	 * We don't know if PIC is present at this point so we need to do
+	 * probe() to get the right number of legacy IRQs.
+	 */
+	return legacy_pic->probe();
 }
 
 #ifdef	CONFIG_X86_IO_APIC
@@ -400,6 +439,8 @@ int __init arch_early_irq_init(void)
 	arch_init_htirq_domain(x86_vector_domain);
 
 	BUG_ON(!alloc_cpumask_var(&vector_cpumask, GFP_KERNEL));
+	BUG_ON(!alloc_cpumask_var(&vector_searchmask, GFP_KERNEL));
+	BUG_ON(!alloc_cpumask_var(&searched_cpumask, GFP_KERNEL));
 
 	return arch_early_ioapic_init();
 }
@@ -488,14 +529,7 @@ static int apic_set_affinity(struct irq_data *irq_data,
 		return -EINVAL;
 
 	err = assign_irq_vector(irq, data, dest);
-	if (err) {
-		if (assign_irq_vector(irq, data,
-				      irq_data_get_affinity_mask(irq_data)))
-			pr_err("Failed to recover vector for irq %d\n", irq);
-		return err;
-	}
-
-	return IRQ_SET_MASK_OK;
+	return err ? err : IRQ_SET_MASK_OK;
 }
 
 static struct irq_chip lapic_controller = {
@@ -507,20 +541,12 @@ static struct irq_chip lapic_controller = {
 #ifdef CONFIG_SMP
 static void __send_cleanup_vector(struct apic_chip_data *data)
 {
-	cpumask_var_t cleanup_mask;
-
-	if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
-		unsigned int i;
-
-		for_each_cpu_and(i, data->old_domain, cpu_online_mask)
-			apic->send_IPI_mask(cpumask_of(i),
-					    IRQ_MOVE_CLEANUP_VECTOR);
-	} else {
-		cpumask_and(cleanup_mask, data->old_domain, cpu_online_mask);
-		apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
-		free_cpumask_var(cleanup_mask);
-	}
+	raw_spin_lock(&vector_lock);
+	cpumask_and(data->old_domain, data->old_domain, cpu_online_mask);
 	data->move_in_progress = 0;
+	if (!cpumask_empty(data->old_domain))
+		apic->send_IPI_mask(data->old_domain, IRQ_MOVE_CLEANUP_VECTOR);
+	raw_spin_unlock(&vector_lock);
 }
 
 void send_cleanup_vector(struct irq_cfg *cfg)
@@ -564,12 +590,25 @@ asmlinkage __visible void smp_irq_move_cleanup_interrupt(void)
 			goto unlock;
 
 		/*
-		 * Check if the irq migration is in progress. If so, we
-		 * haven't received the cleanup request yet for this irq.
+		 * Nothing to cleanup if irq migration is in progress
+		 * or this cpu is not set in the cleanup mask.
 		 */
-		if (data->move_in_progress)
+		if (data->move_in_progress ||
+		    !cpumask_test_cpu(me, data->old_domain))
 			goto unlock;
 
+		/*
+		 * We have two cases to handle here:
+		 * 1) vector is unchanged but the target mask got reduced
+		 * 2) vector and the target mask has changed
+		 *
+		 * #1 is obvious, but in #2 we have two vectors with the same
+		 * irq descriptor: the old and the new vector. So we need to
+		 * make sure that we only cleanup the old vector. The new
+		 * vector has the current @vector number in the config and
+		 * this cpu is part of the target mask. We better leave that
+		 * one alone.
+		 */
 		if (vector == data->cfg.vector &&
 		    cpumask_test_cpu(me, data->domain))
 			goto unlock;
@@ -587,6 +626,7 @@ asmlinkage __visible void smp_irq_move_cleanup_interrupt(void)
 			goto unlock;
 		}
 		__this_cpu_write(vector_irq[vector], VECTOR_UNUSED);
+		cpumask_clear_cpu(me, data->old_domain);
 unlock:
 		raw_spin_unlock(&desc->lock);
 	}
@@ -615,12 +655,99 @@ void irq_complete_move(struct irq_cfg *cfg)
 	__irq_complete_move(cfg, ~get_irq_regs()->orig_ax);
 }
 
-void irq_force_complete_move(int irq)
+/*
+ * Called from fixup_irqs() with @desc->lock held and interrupts disabled.
+ */
+void irq_force_complete_move(struct irq_desc *desc)
 {
-	struct irq_cfg *cfg = irq_cfg(irq);
+	struct irq_data *irqdata = irq_desc_get_irq_data(desc);
+	struct apic_chip_data *data = apic_chip_data(irqdata);
+	struct irq_cfg *cfg = data ? &data->cfg : NULL;
+	unsigned int cpu;
+
+	if (!cfg)
+		return;
+
+	/*
+	 * This is tricky. If the cleanup of @data->old_domain has not been
+	 * done yet, then the following setaffinity call will fail with
+	 * -EBUSY. This can leave the interrupt in a stale state.
+	 *
+	 * All CPUs are stuck in stop machine with interrupts disabled so
+	 * calling __irq_complete_move() would be completely pointless.
+	 */
+	raw_spin_lock(&vector_lock);
+	/*
+	 * Clean out all offline cpus (including the outgoing one) from the
+	 * old_domain mask.
+	 */
+	cpumask_and(data->old_domain, data->old_domain, cpu_online_mask);
 
-	if (cfg)
-		__irq_complete_move(cfg, cfg->vector);
+	/*
+	 * If move_in_progress is cleared and the old_domain mask is empty,
+	 * then there is nothing to cleanup. fixup_irqs() will take care of
+	 * the stale vectors on the outgoing cpu.
+	 */
+	if (!data->move_in_progress && cpumask_empty(data->old_domain)) {
+		raw_spin_unlock(&vector_lock);
+		return;
+	}
+
+	/*
+	 * 1) The interrupt is in move_in_progress state. That means that we
+	 *    have not seen an interrupt since the io_apic was reprogrammed to
+	 *    the new vector.
+	 *
+	 * 2) The interrupt has fired on the new vector, but the cleanup IPIs
+	 *    have not been processed yet.
+	 */
+	if (data->move_in_progress) {
+		/*
+		 * In theory there is a race:
+		 *
+		 * set_ioapic(new_vector) <-- Interrupt is raised before update
+		 *			      is effective, i.e. it's raised on
+		 *			      the old vector.
+		 *
+		 * So if the target cpu cannot handle that interrupt before
+		 * the old vector is cleaned up, we get a spurious interrupt
+		 * and in the worst case the ioapic irq line becomes stale.
+		 *
+		 * But in case of cpu hotplug this should be a non issue
+		 * because if the affinity update happens right before all
+		 * cpus rendevouz in stop machine, there is no way that the
+		 * interrupt can be blocked on the target cpu because all cpus
+		 * loops first with interrupts enabled in stop machine, so the
+		 * old vector is not yet cleaned up when the interrupt fires.
+		 *
+		 * So the only way to run into this issue is if the delivery
+		 * of the interrupt on the apic/system bus would be delayed
+		 * beyond the point where the target cpu disables interrupts
+		 * in stop machine. I doubt that it can happen, but at least
+		 * there is a theroretical chance. Virtualization might be
+		 * able to expose this, but AFAICT the IOAPIC emulation is not
+		 * as stupid as the real hardware.
+		 *
+		 * Anyway, there is nothing we can do about that at this point
+		 * w/o refactoring the whole fixup_irq() business completely.
+		 * We print at least the irq number and the old vector number,
+		 * so we have the necessary information when a problem in that
+		 * area arises.
+		 */
+		pr_warn("IRQ fixup: irq %d move in progress, old vector %d\n",
+			irqdata->irq, cfg->old_vector);
+	}
+	/*
+	 * If old_domain is not empty, then other cpus still have the irq
+	 * descriptor set in their vector array. Clean it up.
+	 */
+	for_each_cpu(cpu, data->old_domain)
+		per_cpu(vector_irq, cpu)[cfg->old_vector] = VECTOR_UNUSED;
+
+	/* Cleanup the left overs of the (half finished) move */
+	cpumask_clear(data->old_domain);
+	data->move_in_progress = 0;
+	raw_spin_unlock(&vector_lock);
 }
 #endif
 
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index cc8311c4d298..aca8b75c1552 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -23,6 +23,14 @@ static inline u32 x2apic_cluster(int cpu)
 	return per_cpu(x86_cpu_to_logical_apicid, cpu) >> 16;
 }
 
+static void x2apic_send_IPI(int cpu, int vector)
+{
+	u32 dest = per_cpu(x86_cpu_to_logical_apicid, cpu);
+
+	x2apic_wrmsr_fence();
+	__x2apic_send_IPI_dest(dest, vector, APIC_DEST_LOGICAL);
+}
+
 static void
 __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
@@ -266,6 +274,7 @@ static struct apic apic_x2apic_cluster = {
 
 	.cpu_mask_to_apicid_and		= x2apic_cpu_mask_to_apicid_and,
 
+	.send_IPI			= x2apic_send_IPI,
 	.send_IPI_mask			= x2apic_send_IPI_mask,
 	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 662e9150ea6f..a1242e2c12e6 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -36,6 +36,14 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
 }
 
+static void x2apic_send_IPI(int cpu, int vector)
+{
+	u32 dest = per_cpu(x86_cpu_to_apicid, cpu);
+
+	x2apic_wrmsr_fence();
+	__x2apic_send_IPI_dest(dest, vector, APIC_DEST_PHYSICAL);
+}
+
 static void
 __x2apic_send_IPI_mask(const struct cpumask *mask, int vector, int apic_dest)
 {
@@ -122,6 +130,7 @@ static struct apic apic_x2apic_phys = {
 
 	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
 
+	.send_IPI			= x2apic_send_IPI,
 	.send_IPI_mask			= x2apic_send_IPI_mask,
 	.send_IPI_mask_allbutself	= x2apic_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= x2apic_send_IPI_allbutself,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 4a139465f1d4..8f4942e2bcbb 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -406,6 +406,7 @@ static struct apic __refdata apic_x2apic_uv_x = {
 
 	.cpu_mask_to_apicid_and		= uv_cpu_mask_to_apicid_and,
 
+	.send_IPI			= uv_send_IPI_one,
 	.send_IPI_mask			= uv_send_IPI_mask,
 	.send_IPI_mask_allbutself	= uv_send_IPI_mask_allbutself,
 	.send_IPI_allbutself		= uv_send_IPI_allbutself,
@@ -791,7 +792,8 @@ static int uv_scir_cpu_notify(struct notifier_block *self, unsigned long action,
 {
 	long cpu = (long)hcpu;
 
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
+	case CPU_DOWN_FAILED:
 	case CPU_ONLINE:
 		uv_heartbeat_enable(cpu);
 		break;
@@ -859,7 +861,7 @@ int uv_set_vga_state(struct pci_dev *pdev, bool decode,
  */
 void uv_cpu_init(void)
 {
-	/* CPU 0 initilization will be done via uv_system_init. */
+	/* CPU 0 initialization will be done via uv_system_init. */
 	if (!uv_blade_info)
 		return;
 
@@ -888,7 +890,10 @@ void __init uv_system_init(void)
 		return;
 	}
 	pr_info("UV: Found %s hub\n", hub);
-	map_low_mmrs();
+
+	/* We now only need to map the MMRs on UV1 */
+	if (is_uv1_hub())
+		map_low_mmrs();
 
 	m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
 	m_val = m_n_config.s.m_skt;
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 052c9c3026cc..9307f182fe30 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -1088,7 +1088,7 @@ static int apm_get_battery_status(u_short which, u_short *status,
  *	@device: identity of device
  *	@enable: on/off
  *
- *	Activate or deactive power management on either a specific device
+ *	Activate or deactivate power management on either a specific device
  *	or the entire system (%APM_DEVICE_ALL).
  */
 
diff --git a/arch/x86/kernel/asm-offsets.c b/arch/x86/kernel/asm-offsets.c
index 439df975bc7a..5c042466f274 100644
--- a/arch/x86/kernel/asm-offsets.c
+++ b/arch/x86/kernel/asm-offsets.c
@@ -59,15 +59,11 @@ void common(void) {
 
 #ifdef CONFIG_PARAVIRT
 	BLANK();
-	OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled);
 	OFFSET(PARAVIRT_PATCH_pv_cpu_ops, paravirt_patch_template, pv_cpu_ops);
 	OFFSET(PARAVIRT_PATCH_pv_irq_ops, paravirt_patch_template, pv_irq_ops);
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
-#ifdef CONFIG_X86_32
-	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
-#endif
 	OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
 	OFFSET(PV_MMU_read_cr2, pv_mmu_ops, read_cr2);
 #endif
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 6ce39025f467..ecdc1d217dc0 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -7,7 +7,7 @@
 #include <linux/lguest.h>
 #include "../../../drivers/lguest/lg.h"
 
-#define __SYSCALL_I386(nr, sym, compat) [nr] = 1,
+#define __SYSCALL_I386(nr, sym, qual) [nr] = 1,
 static char syscalls[] = {
 #include <asm/syscalls_32.h>
 };
@@ -52,6 +52,11 @@ void foo(void)
 	DEFINE(TSS_sysenter_sp0, offsetof(struct tss_struct, x86_tss.sp0) -
 	       offsetofend(struct tss_struct, SYSENTER_stack));
 
+	/* Offset from cpu_tss to SYSENTER_stack */
+	OFFSET(CPU_TSS_SYSENTER_stack, tss_struct, SYSENTER_stack);
+	/* Size of SYSENTER_stack */
+	DEFINE(SIZEOF_SYSENTER_stack, sizeof(((struct tss_struct *)0)->SYSENTER_stack));
+
 #if defined(CONFIG_LGUEST) || defined(CONFIG_LGUEST_GUEST) || defined(CONFIG_LGUEST_MODULE)
 	BLANK();
 	OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled);
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index d8f42f902a0f..d875f97d4e0b 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -4,17 +4,11 @@
 
 #include <asm/ia32.h>
 
-#define __SYSCALL_64(nr, sym, compat) [nr] = 1,
-#define __SYSCALL_COMMON(nr, sym, compat) [nr] = 1,
-#ifdef CONFIG_X86_X32_ABI
-# define __SYSCALL_X32(nr, sym, compat) [nr] = 1,
-#else
-# define __SYSCALL_X32(nr, sym, compat) /* nothing */
-#endif
+#define __SYSCALL_64(nr, sym, qual) [nr] = 1,
 static char syscalls_64[] = {
 #include <asm/syscalls_64.h>
 };
-#define __SYSCALL_I386(nr, sym, compat) [nr] = 1,
+#define __SYSCALL_I386(nr, sym, qual) [nr] = 1,
 static char syscalls_ia32[] = {
 #include <asm/syscalls_32.h>
 };
@@ -23,7 +17,6 @@ int main(void)
 {
 #ifdef CONFIG_PARAVIRT
 	OFFSET(PV_IRQ_adjust_exception_frame, pv_irq_ops, adjust_exception_frame);
-	OFFSET(PV_CPU_usergs_sysret32, pv_cpu_ops, usergs_sysret32);
 	OFFSET(PV_CPU_usergs_sysret64, pv_cpu_ops, usergs_sysret64);
 	OFFSET(PV_CPU_swapgs, pv_cpu_ops, swapgs);
 	BLANK();
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 58031303e304..4a8697f7d4ef 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -8,6 +8,10 @@ CFLAGS_REMOVE_common.o = -pg
 CFLAGS_REMOVE_perf_event.o = -pg
 endif
 
+# If these files are instrumented, boot hangs during the first second.
+KCOV_INSTRUMENT_common.o := n
+KCOV_INSTRUMENT_perf_event.o := n
+
 # Make sure load_percpu_segment has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_common.o		:= $(nostackp)
@@ -30,33 +34,11 @@ obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
 obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
 obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
 
-obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
-
-ifdef CONFIG_PERF_EVENTS
-obj-$(CONFIG_CPU_SUP_AMD)		+= perf_event_amd.o perf_event_amd_uncore.o
-ifdef CONFIG_AMD_IOMMU
-obj-$(CONFIG_CPU_SUP_AMD)		+= perf_event_amd_iommu.o
-endif
-obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_p6.o perf_event_knc.o perf_event_p4.o
-obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_intel_lbr.o perf_event_intel_ds.o perf_event_intel.o
-obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_intel_rapl.o perf_event_intel_cqm.o
-obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_intel_pt.o perf_event_intel_bts.o
-obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_intel_cstate.o
-
-obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE)	+= perf_event_intel_uncore.o \
-					   perf_event_intel_uncore_snb.o \
-					   perf_event_intel_uncore_snbep.o \
-					   perf_event_intel_uncore_nhmex.o
-obj-$(CONFIG_CPU_SUP_INTEL)		+= perf_event_msr.o
-obj-$(CONFIG_CPU_SUP_AMD)		+= perf_event_msr.o
-endif
-
-
 obj-$(CONFIG_X86_MCE)			+= mcheck/
 obj-$(CONFIG_MTRR)			+= mtrr/
 obj-$(CONFIG_MICROCODE)			+= microcode/
 
-obj-$(CONFIG_X86_LOCAL_APIC)		+= perfctr-watchdog.o perf_event_amd_ibs.o
+obj-$(CONFIG_X86_LOCAL_APIC)		+= perfctr-watchdog.o
 
 obj-$(CONFIG_HYPERVISOR_GUEST)		+= vmware.o hypervisor.o mshyperv.o
 
@@ -64,7 +46,7 @@ ifdef CONFIG_X86_FEATURE_NAMES
 quiet_cmd_mkcapflags = MKCAP   $@
       cmd_mkcapflags = $(CONFIG_SHELL) $(srctree)/$(src)/mkcapflags.sh $< $@
 
-cpufeature = $(src)/../../include/asm/cpufeature.h
+cpufeature = $(src)/../../include/asm/cpufeatures.h
 
 targets += capflags.c
 $(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.sh FORCE
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 4a70fc6d400a..7b76eb67a9b3 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -75,14 +75,17 @@ static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
  */
 
 extern __visible void vide(void);
-__asm__(".globl vide\n\t.align 4\nvide: ret");
+__asm__(".globl vide\n"
+	".type vide, @function\n"
+	".align 4\n"
+	"vide: ret\n");
 
 static void init_amd_k5(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_X86_32
 /*
  * General Systems BIOSen alias the cpu frequency registers
- * of the Elan at 0x000df000. Unfortuantly, one of the Linux
+ * of the Elan at 0x000df000. Unfortunately, one of the Linux
  * drivers subsequently pokes it, and changes the CPU speed.
  * Workaround : Remove the unneeded alias.
  */
@@ -117,7 +120,7 @@ static void init_amd_k6(struct cpuinfo_x86 *c)
 		void (*f_vide)(void);
 		u64 d, d2;
 
-		printk(KERN_INFO "AMD K6 stepping B detected - ");
+		pr_info("AMD K6 stepping B detected - ");
 
 		/*
 		 * It looks like AMD fixed the 2.6.2 bug and improved indirect
@@ -133,10 +136,9 @@ static void init_amd_k6(struct cpuinfo_x86 *c)
 		d = d2-d;
 
 		if (d > 20*K6_BUG_LOOP)
-			printk(KERN_CONT
-				"system stability may be impaired when more than 32 MB are used.\n");
+			pr_cont("system stability may be impaired when more than 32 MB are used.\n");
 		else
-			printk(KERN_CONT "probably OK (after B9730xxxx).\n");
+			pr_cont("probably OK (after B9730xxxx).\n");
 	}
 
 	/* K6 with old style WHCR */
@@ -154,7 +156,7 @@ static void init_amd_k6(struct cpuinfo_x86 *c)
 			wbinvd();
 			wrmsr(MSR_K6_WHCR, l, h);
 			local_irq_restore(flags);
-			printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
+			pr_info("Enabling old style K6 write allocation for %d Mb\n",
 				mbytes);
 		}
 		return;
@@ -175,7 +177,7 @@ static void init_amd_k6(struct cpuinfo_x86 *c)
 			wbinvd();
 			wrmsr(MSR_K6_WHCR, l, h);
 			local_irq_restore(flags);
-			printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
+			pr_info("Enabling new style K6 write allocation for %d Mb\n",
 				mbytes);
 		}
 
@@ -202,7 +204,7 @@ static void init_amd_k7(struct cpuinfo_x86 *c)
 	 */
 	if (c->x86_model >= 6 && c->x86_model <= 10) {
 		if (!cpu_has(c, X86_FEATURE_XMM)) {
-			printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
+			pr_info("Enabling disabled K7/SSE Support.\n");
 			msr_clear_bit(MSR_K7_HWCR, 15);
 			set_cpu_cap(c, X86_FEATURE_XMM);
 		}
@@ -216,9 +218,8 @@ static void init_amd_k7(struct cpuinfo_x86 *c)
 	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
 		rdmsr(MSR_K7_CLK_CTL, l, h);
 		if ((l & 0xfff00000) != 0x20000000) {
-			printk(KERN_INFO
-			    "CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
-					l, ((l & 0x000fffff)|0x20000000));
+			pr_info("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
+				l, ((l & 0x000fffff)|0x20000000));
 			wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
 		}
 	}
@@ -299,46 +300,40 @@ static int nearby_node(int apicid)
 #ifdef CONFIG_SMP
 static void amd_get_topology(struct cpuinfo_x86 *c)
 {
-	u32 cores_per_cu = 1;
 	u8 node_id;
 	int cpu = smp_processor_id();
 
 	/* get information required for multi-node processors */
-	if (cpu_has_topoext) {
+	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		u32 eax, ebx, ecx, edx;
 
 		cpuid(0x8000001e, &eax, &ebx, &ecx, &edx);
-		nodes_per_socket = ((ecx >> 8) & 7) + 1;
 		node_id = ecx & 7;
 
 		/* get compute unit information */
 		smp_num_siblings = ((ebx >> 8) & 3) + 1;
-		c->compute_unit_id = ebx & 0xff;
-		cores_per_cu += ((ebx >> 8) & 3);
+		c->x86_max_cores /= smp_num_siblings;
+		c->cpu_core_id = ebx & 0xff;
 	} else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) {
 		u64 value;
 
 		rdmsrl(MSR_FAM10H_NODE_ID, value);
-		nodes_per_socket = ((value >> 3) & 7) + 1;
 		node_id = value & 7;
 	} else
 		return;
 
 	/* fixup multi-node processor information */
 	if (nodes_per_socket > 1) {
-		u32 cores_per_node;
 		u32 cus_per_node;
 
 		set_cpu_cap(c, X86_FEATURE_AMD_DCM);
-		cores_per_node = c->x86_max_cores / nodes_per_socket;
-		cus_per_node = cores_per_node / cores_per_cu;
+		cus_per_node = c->x86_max_cores / nodes_per_socket;
 
 		/* store NodeID, use llc_shared_map to store sibling info */
 		per_cpu(cpu_llc_id, cpu) = node_id;
 
 		/* core id has to be in the [0 .. cores_per_node - 1] range */
-		c->cpu_core_id %= cores_per_node;
-		c->compute_unit_id %= cus_per_node;
+		c->cpu_core_id %= cus_per_node;
 	}
 }
 #endif
@@ -352,6 +347,7 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c)
 #ifdef CONFIG_SMP
 	unsigned bits;
 	int cpu = smp_processor_id();
+	unsigned int socket_id, core_complex_id;
 
 	bits = c->x86_coreid_bits;
 	/* Low order bits define the core id (index of core in socket) */
@@ -361,6 +357,18 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c)
 	/* use socket ID also for last level cache */
 	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
 	amd_get_topology(c);
+
+	/*
+	 * Fix percpu cpu_llc_id here as LLC topology is different
+	 * for Fam17h systems.
+	 */
+	 if (c->x86 != 0x17 || !cpuid_edx(0x80000006))
+		return;
+
+	socket_id	= (c->apicid >> bits) - 1;
+	core_complex_id	= (c->apicid & ((1 << bits) - 1)) >> 3;
+
+	per_cpu(cpu_llc_id, cpu) = (socket_id << 3) | core_complex_id;
 #endif
 }
 
@@ -421,8 +429,7 @@ static void srat_detect_node(struct cpuinfo_x86 *c)
 		 */
 		int ht_nodeid = c->initial_apicid;
 
-		if (ht_nodeid >= 0 &&
-		    __apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+		if (__apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
 			node = __apicid_to_node[ht_nodeid];
 		/* Pick a nearby node */
 		if (!node_online(node))
@@ -473,7 +480,7 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
 		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
 			unsigned long pfn = tseg >> PAGE_SHIFT;
 
-			printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+			pr_debug("tseg: %010llx\n", tseg);
 			if (pfn_range_is_mapped(pfn, pfn + 1))
 				set_memory_4k((unsigned long)__va(tseg), 1);
 		}
@@ -488,8 +495,7 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
 
 			rdmsrl(MSR_K7_HWCR, val);
 			if (!(val & BIT(24)))
-				printk(KERN_WARNING FW_BUG "TSC doesn't count "
-					"with P0 frequency!\n");
+				pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");
 		}
 	}
 
@@ -510,6 +516,18 @@ static void bsp_init_amd(struct cpuinfo_x86 *c)
 
 	if (cpu_has(c, X86_FEATURE_MWAITX))
 		use_mwaitx_delay();
+
+	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
+		u32 ecx;
+
+		ecx = cpuid_ecx(0x8000001e);
+		nodes_per_socket = ((ecx >> 8) & 7) + 1;
+	} else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) {
+		u64 value;
+
+		rdmsrl(MSR_FAM10H_NODE_ID, value);
+		nodes_per_socket = ((value >> 3) & 7) + 1;
+	}
 }
 
 static void early_init_amd(struct cpuinfo_x86 *c)
@@ -527,6 +545,10 @@ static void early_init_amd(struct cpuinfo_x86 *c)
 			set_sched_clock_stable();
 	}
 
+	/* Bit 12 of 8000_0007 edx is accumulated power mechanism. */
+	if (c->x86_power & BIT(12))
+		set_cpu_cap(c, X86_FEATURE_ACC_POWER);
+
 #ifdef CONFIG_X86_64
 	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
 #else
@@ -665,9 +687,9 @@ static void init_amd_bd(struct cpuinfo_x86 *c)
 	 * Disable it on the affected CPUs.
 	 */
 	if ((c->x86_model >= 0x02) && (c->x86_model < 0x20)) {
-		if (!rdmsrl_safe(0xc0011021, &value) && !(value & 0x1E)) {
+		if (!rdmsrl_safe(MSR_F15H_IC_CFG, &value) && !(value & 0x1E)) {
 			value |= 0x1E;
-			wrmsrl_safe(0xc0011021, value);
+			wrmsrl_safe(MSR_F15H_IC_CFG, value);
 		}
 	}
 }
@@ -909,7 +931,7 @@ static bool cpu_has_amd_erratum(struct cpuinfo_x86 *cpu, const int *erratum)
 
 void set_dr_addr_mask(unsigned long mask, int dr)
 {
-	if (!cpu_has_bpext)
+	if (!boot_cpu_has(X86_FEATURE_BPEXT))
 		return;
 
 	switch (dr) {
diff --git a/arch/x86/kernel/cpu/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c
index 04f0fe5af83e..a972ac4c7e7d 100644
--- a/arch/x86/kernel/cpu/bugs_64.c
+++ b/arch/x86/kernel/cpu/bugs_64.c
@@ -15,7 +15,7 @@ void __init check_bugs(void)
 {
 	identify_boot_cpu();
 #if !defined(CONFIG_SMP)
-	printk(KERN_INFO "CPU: ");
+	pr_info("CPU: ");
 	print_cpu_info(&boot_cpu_data);
 #endif
 	alternative_instructions();
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index d8fba5c15fbd..1661d8ec9280 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -1,7 +1,7 @@
 #include <linux/bitops.h>
 #include <linux/kernel.h>
 
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <asm/e820.h>
 #include <asm/mtrr.h>
 #include <asm/msr.h>
@@ -29,7 +29,7 @@ static void init_c3(struct cpuinfo_x86 *c)
 			rdmsr(MSR_VIA_FCR, lo, hi);
 			lo |= ACE_FCR;		/* enable ACE unit */
 			wrmsr(MSR_VIA_FCR, lo, hi);
-			printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
+			pr_info("CPU: Enabled ACE h/w crypto\n");
 		}
 
 		/* enable RNG unit, if present and disabled */
@@ -37,13 +37,13 @@ static void init_c3(struct cpuinfo_x86 *c)
 			rdmsr(MSR_VIA_RNG, lo, hi);
 			lo |= RNG_ENABLE;	/* enable RNG unit */
 			wrmsr(MSR_VIA_RNG, lo, hi);
-			printk(KERN_INFO "CPU: Enabled h/w RNG\n");
+			pr_info("CPU: Enabled h/w RNG\n");
 		}
 
 		/* store Centaur Extended Feature Flags as
 		 * word 5 of the CPU capability bit array
 		 */
-		c->x86_capability[5] = cpuid_edx(0xC0000001);
+		c->x86_capability[CPUID_C000_0001_EDX] = cpuid_edx(0xC0000001);
 	}
 #ifdef CONFIG_X86_32
 	/* Cyrix III family needs CX8 & PGE explicitly enabled. */
@@ -130,7 +130,7 @@ static void init_centaur(struct cpuinfo_x86 *c)
 			name = "C6";
 			fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
 			fcr_clr = DPDC;
-			printk(KERN_NOTICE "Disabling bugged TSC.\n");
+			pr_notice("Disabling bugged TSC.\n");
 			clear_cpu_cap(c, X86_FEATURE_TSC);
 			break;
 		case 8:
@@ -163,11 +163,11 @@ static void init_centaur(struct cpuinfo_x86 *c)
 		newlo = (lo|fcr_set) & (~fcr_clr);
 
 		if (newlo != lo) {
-			printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n",
+			pr_info("Centaur FCR was 0x%X now 0x%X\n",
 				lo, newlo);
 			wrmsr(MSR_IDT_FCR1, newlo, hi);
 		} else {
-			printk(KERN_INFO "Centaur FCR is 0x%X\n", lo);
+			pr_info("Centaur FCR is 0x%X\n", lo);
 		}
 		/* Emulate MTRRs using Centaur's MCR. */
 		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4ddd780aeac9..8394b3d1f94f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -162,6 +162,22 @@ static int __init x86_mpx_setup(char *s)
 }
 __setup("nompx", x86_mpx_setup);
 
+static int __init x86_noinvpcid_setup(char *s)
+{
+	/* noinvpcid doesn't accept parameters */
+	if (s)
+		return -EINVAL;
+
+	/* do not emit a message if the feature is not present */
+	if (!boot_cpu_has(X86_FEATURE_INVPCID))
+		return 0;
+
+	setup_clear_cpu_cap(X86_FEATURE_INVPCID);
+	pr_info("noinvpcid: INVPCID feature disabled\n");
+	return 0;
+}
+early_param("noinvpcid", x86_noinvpcid_setup);
+
 #ifdef CONFIG_X86_32
 static int cachesize_override = -1;
 static int disable_x86_serial_nr = 1;
@@ -228,7 +244,7 @@ static void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 	lo |= 0x200000;
 	wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
 
-	printk(KERN_NOTICE "CPU serial number disabled.\n");
+	pr_notice("CPU serial number disabled.\n");
 	clear_cpu_cap(c, X86_FEATURE_PN);
 
 	/* Disabling the serial number may affect the cpuid level */
@@ -273,10 +289,9 @@ __setup("nosmap", setup_disable_smap);
 
 static __always_inline void setup_smap(struct cpuinfo_x86 *c)
 {
-	unsigned long eflags;
+	unsigned long eflags = native_save_fl();
 
 	/* This should have been cleared long ago */
-	raw_local_save_flags(eflags);
 	BUG_ON(eflags & X86_EFLAGS_AC);
 
 	if (cpu_has(c, X86_FEATURE_SMAP)) {
@@ -289,6 +304,48 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c)
 }
 
 /*
+ * Protection Keys are not available in 32-bit mode.
+ */
+static bool pku_disabled;
+
+static __always_inline void setup_pku(struct cpuinfo_x86 *c)
+{
+	if (!cpu_has(c, X86_FEATURE_PKU))
+		return;
+	if (pku_disabled)
+		return;
+
+	cr4_set_bits(X86_CR4_PKE);
+	/*
+	 * Seting X86_CR4_PKE will cause the X86_FEATURE_OSPKE
+	 * cpuid bit to be set.  We need to ensure that we
+	 * update that bit in this CPU's "cpu_info".
+	 */
+	get_cpu_cap(c);
+}
+
+#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
+static __init int setup_disable_pku(char *arg)
+{
+	/*
+	 * Do not clear the X86_FEATURE_PKU bit.  All of the
+	 * runtime checks are against OSPKE so clearing the
+	 * bit does nothing.
+	 *
+	 * This way, we will see "pku" in cpuinfo, but not
+	 * "ospke", which is exactly what we want.  It shows
+	 * that the CPU has PKU, but the OS has not enabled it.
+	 * This happens to be exactly how a system would look
+	 * if we disabled the config option.
+	 */
+	pr_info("x86: 'nopku' specified, disabling Memory Protection Keys\n");
+	pku_disabled = true;
+	return 1;
+}
+__setup("nopku", setup_disable_pku);
+#endif /* CONFIG_X86_64 */
+
+/*
  * Some CPU features depend on higher CPUID levels, which may not always
  * be available due to CPUID level capping or broken virtualization
  * software.  Add those features to this table to auto-disable them.
@@ -330,9 +387,8 @@ static void filter_cpuid_features(struct cpuinfo_x86 *c, bool warn)
 		if (!warn)
 			continue;
 
-		printk(KERN_WARNING
-		       "CPU: CPU feature " X86_CAP_FMT " disabled, no CPUID level 0x%x\n",
-				x86_cap_flag(df->feature), df->level);
+		pr_warn("CPU: CPU feature " X86_CAP_FMT " disabled, no CPUID level 0x%x\n",
+			x86_cap_flag(df->feature), df->level);
 	}
 }
 
@@ -511,7 +567,7 @@ void detect_ht(struct cpuinfo_x86 *c)
 	smp_num_siblings = (ebx & 0xff0000) >> 16;
 
 	if (smp_num_siblings == 1) {
-		printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n");
+		pr_info_once("CPU0: Hyper-Threading is disabled\n");
 		goto out;
 	}
 
@@ -532,10 +588,10 @@ void detect_ht(struct cpuinfo_x86 *c)
 
 out:
 	if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
-		       c->phys_proc_id);
-		printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
-		       c->cpu_core_id);
+		pr_info("CPU: Physical Processor ID: %d\n",
+			c->phys_proc_id);
+		pr_info("CPU: Processor Core ID: %d\n",
+			c->cpu_core_id);
 		printed = 1;
 	}
 #endif
@@ -560,9 +616,8 @@ static void get_cpu_vendor(struct cpuinfo_x86 *c)
 		}
 	}
 
-	printk_once(KERN_ERR
-			"CPU: vendor_id '%s' unknown, using generic init.\n" \
-			"CPU: Your system may be unstable.\n", v);
+	pr_err_once("CPU: vendor_id '%s' unknown, using generic init.\n" \
+		    "CPU: Your system may be unstable.\n", v);
 
 	c->x86_vendor = X86_VENDOR_UNKNOWN;
 	this_cpu = &default_cpu;
@@ -582,14 +637,9 @@ void cpu_detect(struct cpuinfo_x86 *c)
 		u32 junk, tfms, cap0, misc;
 
 		cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
-		c->x86 = (tfms >> 8) & 0xf;
-		c->x86_model = (tfms >> 4) & 0xf;
-		c->x86_mask = tfms & 0xf;
-
-		if (c->x86 == 0xf)
-			c->x86 += (tfms >> 20) & 0xff;
-		if (c->x86 >= 0x6)
-			c->x86_model += ((tfms >> 16) & 0xf) << 4;
+		c->x86		= x86_family(tfms);
+		c->x86_model	= x86_model(tfms);
+		c->x86_mask	= x86_stepping(tfms);
 
 		if (cap0 & (1<<19)) {
 			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
@@ -600,51 +650,51 @@ void cpu_detect(struct cpuinfo_x86 *c)
 
 void get_cpu_cap(struct cpuinfo_x86 *c)
 {
-	u32 tfms, xlvl;
-	u32 ebx;
+	u32 eax, ebx, ecx, edx;
 
 	/* Intel-defined flags: level 0x00000001 */
 	if (c->cpuid_level >= 0x00000001) {
-		u32 capability, excap;
+		cpuid(0x00000001, &eax, &ebx, &ecx, &edx);
 
-		cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
-		c->x86_capability[0] = capability;
-		c->x86_capability[4] = excap;
+		c->x86_capability[CPUID_1_ECX] = ecx;
+		c->x86_capability[CPUID_1_EDX] = edx;
 	}
 
 	/* Additional Intel-defined flags: level 0x00000007 */
 	if (c->cpuid_level >= 0x00000007) {
-		u32 eax, ebx, ecx, edx;
-
 		cpuid_count(0x00000007, 0, &eax, &ebx, &ecx, &edx);
 
-		c->x86_capability[9] = ebx;
+		c->x86_capability[CPUID_7_0_EBX] = ebx;
+
+		c->x86_capability[CPUID_6_EAX] = cpuid_eax(0x00000006);
+		c->x86_capability[CPUID_7_ECX] = ecx;
 	}
 
 	/* Extended state features: level 0x0000000d */
 	if (c->cpuid_level >= 0x0000000d) {
-		u32 eax, ebx, ecx, edx;
-
 		cpuid_count(0x0000000d, 1, &eax, &ebx, &ecx, &edx);
 
-		c->x86_capability[10] = eax;
+		c->x86_capability[CPUID_D_1_EAX] = eax;
 	}
 
 	/* Additional Intel-defined flags: level 0x0000000F */
 	if (c->cpuid_level >= 0x0000000F) {
-		u32 eax, ebx, ecx, edx;
 
 		/* QoS sub-leaf, EAX=0Fh, ECX=0 */
 		cpuid_count(0x0000000F, 0, &eax, &ebx, &ecx, &edx);
-		c->x86_capability[11] = edx;
+		c->x86_capability[CPUID_F_0_EDX] = edx;
+
 		if (cpu_has(c, X86_FEATURE_CQM_LLC)) {
 			/* will be overridden if occupancy monitoring exists */
 			c->x86_cache_max_rmid = ebx;
 
 			/* QoS sub-leaf, EAX=0Fh, ECX=1 */
 			cpuid_count(0x0000000F, 1, &eax, &ebx, &ecx, &edx);
-			c->x86_capability[12] = edx;
-			if (cpu_has(c, X86_FEATURE_CQM_OCCUP_LLC)) {
+			c->x86_capability[CPUID_F_1_EDX] = edx;
+
+			if ((cpu_has(c, X86_FEATURE_CQM_OCCUP_LLC)) ||
+			      ((cpu_has(c, X86_FEATURE_CQM_MBM_TOTAL)) ||
+			       (cpu_has(c, X86_FEATURE_CQM_MBM_LOCAL)))) {
 				c->x86_cache_max_rmid = ecx;
 				c->x86_cache_occ_scale = ebx;
 			}
@@ -655,22 +705,24 @@ void get_cpu_cap(struct cpuinfo_x86 *c)
 	}
 
 	/* AMD-defined flags: level 0x80000001 */
-	xlvl = cpuid_eax(0x80000000);
-	c->extended_cpuid_level = xlvl;
+	eax = cpuid_eax(0x80000000);
+	c->extended_cpuid_level = eax;
+
+	if ((eax & 0xffff0000) == 0x80000000) {
+		if (eax >= 0x80000001) {
+			cpuid(0x80000001, &eax, &ebx, &ecx, &edx);
 
-	if ((xlvl & 0xffff0000) == 0x80000000) {
-		if (xlvl >= 0x80000001) {
-			c->x86_capability[1] = cpuid_edx(0x80000001);
-			c->x86_capability[6] = cpuid_ecx(0x80000001);
+			c->x86_capability[CPUID_8000_0001_ECX] = ecx;
+			c->x86_capability[CPUID_8000_0001_EDX] = edx;
 		}
 	}
 
 	if (c->extended_cpuid_level >= 0x80000008) {
-		u32 eax = cpuid_eax(0x80000008);
+		cpuid(0x80000008, &eax, &ebx, &ecx, &edx);
 
 		c->x86_virt_bits = (eax >> 8) & 0xff;
 		c->x86_phys_bits = eax & 0xff;
-		c->x86_capability[13] = cpuid_ebx(0x80000008);
+		c->x86_capability[CPUID_8000_0008_EBX] = ebx;
 	}
 #ifdef CONFIG_X86_32
 	else if (cpu_has(c, X86_FEATURE_PAE) || cpu_has(c, X86_FEATURE_PSE36))
@@ -680,6 +732,9 @@ void get_cpu_cap(struct cpuinfo_x86 *c)
 	if (c->extended_cpuid_level >= 0x80000007)
 		c->x86_power = cpuid_edx(0x80000007);
 
+	if (c->extended_cpuid_level >= 0x8000000a)
+		c->x86_capability[CPUID_8000_000A_EDX] = cpuid_edx(0x8000000a);
+
 	init_scattered_cpuid_features(c);
 }
 
@@ -764,7 +819,7 @@ void __init early_cpu_init(void)
 	int count = 0;
 
 #ifdef CONFIG_PROCESSOR_SELECT
-	printk(KERN_INFO "KERNEL supported cpus:\n");
+	pr_info("KERNEL supported cpus:\n");
 #endif
 
 	for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
@@ -782,7 +837,7 @@ void __init early_cpu_init(void)
 			for (j = 0; j < 2; j++) {
 				if (!cpudev->c_ident[j])
 					continue;
-				printk(KERN_INFO "  %s %s\n", cpudev->c_vendor,
+				pr_info("  %s %s\n", cpudev->c_vendor,
 					cpudev->c_ident[j]);
 			}
 		}
@@ -807,6 +862,31 @@ static void detect_nopl(struct cpuinfo_x86 *c)
 #else
 	set_cpu_cap(c, X86_FEATURE_NOPL);
 #endif
+
+	/*
+	 * ESPFIX is a strange bug.  All real CPUs have it.  Paravirt
+	 * systems that run Linux at CPL > 0 may or may not have the
+	 * issue, but, even if they have the issue, there's absolutely
+	 * nothing we can do about it because we can't use the real IRET
+	 * instruction.
+	 *
+	 * NB: For the time being, only 32-bit kernels support
+	 * X86_BUG_ESPFIX as such.  64-bit kernels directly choose
+	 * whether to apply espfix using paravirt hooks.  If any
+	 * non-paravirt system ever shows up that does *not* have the
+	 * ESPFIX issue, we can change this.
+	 */
+#ifdef CONFIG_X86_32
+#ifdef CONFIG_PARAVIRT
+	do {
+		extern void native_iret(void);
+		if (pv_cpu_ops.iret == native_iret)
+			set_cpu_bug(c, X86_BUG_ESPFIX);
+	} while (0);
+#else
+	set_cpu_bug(c, X86_BUG_ESPFIX);
+#endif
+#endif
 }
 
 static void generic_identify(struct cpuinfo_x86 *c)
@@ -890,7 +970,7 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 	if (this_cpu->c_identify)
 		this_cpu->c_identify(c);
 
-	/* Clear/Set all flags overriden by options, after probe */
+	/* Clear/Set all flags overridden by options, after probe */
 	for (i = 0; i < NCAPINTS; i++) {
 		c->x86_capability[i] &= ~cpu_caps_cleared[i];
 		c->x86_capability[i] |= cpu_caps_set[i];
@@ -947,9 +1027,10 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 	init_hypervisor(c);
 	x86_init_rdrand(c);
 	x86_init_cache_qos(c);
+	setup_pku(c);
 
 	/*
-	 * Clear/Set all flags overriden by options, need do it
+	 * Clear/Set all flags overridden by options, need do it
 	 * before following smp all cpus cap AND.
 	 */
 	for (i = 0; i < NCAPINTS; i++) {
@@ -981,6 +1062,8 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 #ifdef CONFIG_NUMA
 	numa_add_cpu(smp_processor_id());
 #endif
+	/* The boot/hotplug time assigment got cleared, restore it */
+	c->logical_proc_id = topology_phys_to_logical_pkg(c->phys_proc_id);
 }
 
 /*
@@ -1065,7 +1148,7 @@ static void __print_cpu_msr(void)
 		for (index = index_min; index < index_max; index++) {
 			if (rdmsrl_safe(index, &val))
 				continue;
-			printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
+			pr_info(" MSR%08x: %016llx\n", index, val);
 		}
 	}
 }
@@ -1104,19 +1187,19 @@ void print_cpu_info(struct cpuinfo_x86 *c)
 	}
 
 	if (vendor && !strstr(c->x86_model_id, vendor))
-		printk(KERN_CONT "%s ", vendor);
+		pr_cont("%s ", vendor);
 
 	if (c->x86_model_id[0])
-		printk(KERN_CONT "%s", c->x86_model_id);
+		pr_cont("%s", c->x86_model_id);
 	else
-		printk(KERN_CONT "%d86", c->x86);
+		pr_cont("%d86", c->x86);
 
-	printk(KERN_CONT " (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
+	pr_cont(" (family: 0x%x, model: 0x%x", c->x86, c->x86_model);
 
 	if (c->x86_mask || c->cpuid_level >= 0)
-		printk(KERN_CONT ", stepping: 0x%x)\n", c->x86_mask);
+		pr_cont(", stepping: 0x%x)\n", c->x86_mask);
 	else
-		printk(KERN_CONT ")\n");
+		pr_cont(")\n");
 
 	print_cpu_msr(c);
 }
@@ -1186,7 +1269,7 @@ void syscall_init(void)
 	 * They both write to the same internal register. STAR allows to
 	 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
 	 */
-	wrmsrl(MSR_STAR,  ((u64)__USER32_CS)<<48  | ((u64)__KERNEL_CS)<<32);
+	wrmsr(MSR_STAR, 0, (__USER32_CS << 16) | __KERNEL_CS);
 	wrmsrl(MSR_LSTAR, (unsigned long)entry_SYSCALL_64);
 
 #ifdef CONFIG_IA32_EMULATION
@@ -1442,9 +1525,11 @@ void cpu_init(void)
 
 	show_ucode_info_early();
 
-	printk(KERN_INFO "Initializing CPU#%d\n", cpu);
+	pr_info("Initializing CPU#%d\n", cpu);
 
-	if (cpu_feature_enabled(X86_FEATURE_VME) || cpu_has_tsc || cpu_has_de)
+	if (cpu_feature_enabled(X86_FEATURE_VME) ||
+	    cpu_has_tsc ||
+	    boot_cpu_has(X86_FEATURE_DE))
 		cr4_clear_bits(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
 
 	load_current_idt();
@@ -1477,20 +1562,6 @@ void cpu_init(void)
 }
 #endif
 
-#ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
-void warn_pre_alternatives(void)
-{
-	WARN(1, "You're using static_cpu_has before alternatives have run!\n");
-}
-EXPORT_SYMBOL_GPL(warn_pre_alternatives);
-#endif
-
-inline bool __static_cpu_has_safe(u16 bit)
-{
-	return boot_cpu_has(bit);
-}
-EXPORT_SYMBOL_GPL(__static_cpu_has_safe);
-
 static void bsp_resume(void)
 {
 	if (this_cpu->c_bsp_resume)
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index aaf152e79637..6adef9cac23e 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -8,6 +8,7 @@
 #include <linux/timer.h>
 #include <asm/pci-direct.h>
 #include <asm/tsc.h>
+#include <asm/cpufeature.h>
 
 #include "cpu.h"
 
@@ -103,7 +104,7 @@ static void check_cx686_slop(struct cpuinfo_x86 *c)
 		local_irq_restore(flags);
 
 		if (ccr5 & 2) { /* possible wrong calibration done */
-			printk(KERN_INFO "Recalibrating delay loop with SLOP bit reset\n");
+			pr_info("Recalibrating delay loop with SLOP bit reset\n");
 			calibrate_delay();
 			c->loops_per_jiffy = loops_per_jiffy;
 		}
@@ -115,7 +116,7 @@ static void set_cx86_reorder(void)
 {
 	u8 ccr3;
 
-	printk(KERN_INFO "Enable Memory access reorder on Cyrix/NSC processor.\n");
+	pr_info("Enable Memory access reorder on Cyrix/NSC processor.\n");
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
 
@@ -128,7 +129,7 @@ static void set_cx86_reorder(void)
 
 static void set_cx86_memwb(void)
 {
-	printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
+	pr_info("Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
 
 	/* CCR2 bit 2: unlock NW bit */
 	setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
@@ -268,7 +269,7 @@ static void init_cyrix(struct cpuinfo_x86 *c)
 		 *  VSA1 we work around however.
 		 */
 
-		printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
+		pr_info("Working around Cyrix MediaGX virtual DMA bugs.\n");
 		isa_dma_bridge_buggy = 2;
 
 		/* We do this before the PCI layer is running. However we
@@ -426,7 +427,7 @@ static void cyrix_identify(struct cpuinfo_x86 *c)
 		if (dir0 == 5 || dir0 == 3) {
 			unsigned char ccr3;
 			unsigned long flags;
-			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
+			pr_info("Enabling CPUID on Cyrix processor.\n");
 			local_irq_save(flags);
 			ccr3 = getCx86(CX86_CCR3);
 			/* enable MAPEN  */
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index d820d8eae96b..73d391ae452f 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -56,7 +56,7 @@ detect_hypervisor_vendor(void)
 	}
 
 	if (max_pri)
-		printk(KERN_INFO "Hypervisor detected: %s\n", x86_hyper->name);
+		pr_info("Hypervisor detected: %s\n", x86_hyper->name);
 }
 
 void init_hypervisor(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 98a13db5f4be..1f7fdb91a818 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -8,7 +8,7 @@
 #include <linux/module.h>
 #include <linux/uaccess.h>
 
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <asm/pgtable.h>
 #include <asm/msr.h>
 #include <asm/bugs.h>
@@ -61,7 +61,7 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 	 */
 	if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2 &&
 	    c->microcode < 0x20e) {
-		printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
+		pr_warn("Atom PSE erratum detected, BIOS microcode update recommended\n");
 		clear_cpu_cap(c, X86_FEATURE_PSE);
 	}
 
@@ -97,6 +97,7 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 		switch (c->x86_model) {
 		case 0x27:	/* Penwell */
 		case 0x35:	/* Cloverview */
+		case 0x4a:	/* Merrifield */
 			set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC_S3);
 			break;
 		default:
@@ -139,7 +140,7 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 	if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) {
 		rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
 		if (!(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) {
-			printk(KERN_INFO "Disabled fast string operations\n");
+			pr_info("Disabled fast string operations\n");
 			setup_clear_cpu_cap(X86_FEATURE_REP_GOOD);
 			setup_clear_cpu_cap(X86_FEATURE_ERMS);
 		}
@@ -159,6 +160,19 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 		pr_info("Disabling PGE capability bit\n");
 		setup_clear_cpu_cap(X86_FEATURE_PGE);
 	}
+
+	if (c->cpuid_level >= 0x00000001) {
+		u32 eax, ebx, ecx, edx;
+
+		cpuid(0x00000001, &eax, &ebx, &ecx, &edx);
+		/*
+		 * If HTT (EDX[28]) is set EBX[16:23] contain the number of
+		 * apicids which are reserved per package. Store the resulting
+		 * shift value for the package management code.
+		 */
+		if (edx & (1U << 28))
+			c->x86_coreid_bits = get_count_order((ebx >> 16) & 0xff);
+	}
 }
 
 #ifdef CONFIG_X86_32
@@ -175,7 +189,7 @@ int ppro_with_ram_bug(void)
 	    boot_cpu_data.x86 == 6 &&
 	    boot_cpu_data.x86_model == 1 &&
 	    boot_cpu_data.x86_mask < 8) {
-		printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
+		pr_info("Pentium Pro with Errata#50 detected. Taking evasive action.\n");
 		return 1;
 	}
 	return 0;
@@ -224,7 +238,7 @@ static void intel_workarounds(struct cpuinfo_x86 *c)
 
 		set_cpu_bug(c, X86_BUG_F00F);
 		if (!f00f_workaround_enabled) {
-			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
+			pr_notice("Intel Pentium with F0 0F bug - workaround enabled.\n");
 			f00f_workaround_enabled = 1;
 		}
 	}
@@ -243,7 +257,7 @@ static void intel_workarounds(struct cpuinfo_x86 *c)
 	 * Forcefully enable PAE if kernel parameter "forcepae" is present.
 	 */
 	if (forcepae) {
-		printk(KERN_WARNING "PAE forced!\n");
+		pr_warn("PAE forced!\n");
 		set_cpu_cap(c, X86_FEATURE_PAE);
 		add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE);
 	}
@@ -444,7 +458,8 @@ static void init_intel(struct cpuinfo_x86 *c)
 
 	if (cpu_has_xmm2)
 		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
-	if (cpu_has_ds) {
+
+	if (boot_cpu_has(X86_FEATURE_DS)) {
 		unsigned int l1;
 		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
 		if (!(l1 & (1<<11)))
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index e38d338a6447..de6626c18e42 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -14,7 +14,7 @@
 #include <linux/sysfs.h>
 #include <linux/pci.h>
 
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <asm/amd_nb.h>
 #include <asm/smp.h>
 
@@ -444,7 +444,7 @@ static ssize_t store_cache_disable(struct cacheinfo *this_leaf,
 	err = amd_set_l3_disable_slot(nb, cpu, slot, val);
 	if (err) {
 		if (err == -EEXIST)
-			pr_warning("L3 slot %d in use/index already disabled!\n",
+			pr_warn("L3 slot %d in use/index already disabled!\n",
 				   slot);
 		return err;
 	}
@@ -591,7 +591,7 @@ cpuid4_cache_lookup_regs(int index, struct _cpuid4_info_regs *this_leaf)
 	unsigned		edx;
 
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
-		if (cpu_has_topoext)
+		if (boot_cpu_has(X86_FEATURE_TOPOEXT))
 			cpuid_count(0x8000001d, index, &eax.full,
 				    &ebx.full, &ecx.full, &edx);
 		else
@@ -637,7 +637,7 @@ static int find_num_cache_leaves(struct cpuinfo_x86 *c)
 void init_amd_cacheinfo(struct cpuinfo_x86 *c)
 {
 
-	if (cpu_has_topoext) {
+	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		num_cache_leaves = find_num_cache_leaves(c);
 	} else if (c->extended_cpuid_level >= 0x80000006) {
 		if (cpuid_edx(0x80000006) & 0xf000)
@@ -809,7 +809,7 @@ static int __cache_amd_cpumap_setup(unsigned int cpu, int index,
 	struct cacheinfo *this_leaf;
 	int i, sibling;
 
-	if (cpu_has_topoext) {
+	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		unsigned int apicid, nshared, first, last;
 
 		this_leaf = this_cpu_ci->info_list + index;
diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c
index afa9f0d487ea..fbb5e90557a5 100644
--- a/arch/x86/kernel/cpu/match.c
+++ b/arch/x86/kernel/cpu/match.c
@@ -1,5 +1,5 @@
 #include <asm/cpu_device_id.h>
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <linux/cpu.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/arch/x86/kernel/cpu/mcheck/mce-genpool.c b/arch/x86/kernel/cpu/mcheck/mce-genpool.c
index 0a850100c594..2658e2af74ec 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-genpool.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-genpool.c
@@ -29,7 +29,7 @@ static char gen_pool_buf[MCE_POOLSZ];
 void mce_gen_pool_process(void)
 {
 	struct llist_node *head;
-	struct mce_evt_llist *node;
+	struct mce_evt_llist *node, *tmp;
 	struct mce *mce;
 
 	head = llist_del_all(&mce_event_llist);
@@ -37,7 +37,7 @@ void mce_gen_pool_process(void)
 		return;
 
 	head = llist_reverse_order(head);
-	llist_for_each_entry(node, head, llnode) {
+	llist_for_each_entry_safe(node, tmp, head, llnode) {
 		mce = &node->mce;
 		atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
 		gen_pool_free(mce_evt_pool, (unsigned long)node, sizeof(*node));
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 4cfba4371a71..517619ea6498 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -115,7 +115,7 @@ static int raise_local(void)
 	int cpu = m->extcpu;
 
 	if (m->inject_flags & MCJ_EXCEPTION) {
-		printk(KERN_INFO "Triggering MCE exception on CPU %d\n", cpu);
+		pr_info("Triggering MCE exception on CPU %d\n", cpu);
 		switch (context) {
 		case MCJ_CTX_IRQ:
 			/*
@@ -128,15 +128,15 @@ static int raise_local(void)
 			raise_exception(m, NULL);
 			break;
 		default:
-			printk(KERN_INFO "Invalid MCE context\n");
+			pr_info("Invalid MCE context\n");
 			ret = -EINVAL;
 		}
-		printk(KERN_INFO "MCE exception done on CPU %d\n", cpu);
+		pr_info("MCE exception done on CPU %d\n", cpu);
 	} else if (m->status) {
-		printk(KERN_INFO "Starting machine check poll CPU %d\n", cpu);
+		pr_info("Starting machine check poll CPU %d\n", cpu);
 		raise_poll(m);
 		mce_notify_irq();
-		printk(KERN_INFO "Machine check poll done on CPU %d\n", cpu);
+		pr_info("Machine check poll done on CPU %d\n", cpu);
 	} else
 		m->finished = 0;
 
@@ -183,8 +183,7 @@ static void raise_mce(struct mce *m)
 		start = jiffies;
 		while (!cpumask_empty(mce_inject_cpumask)) {
 			if (!time_before(jiffies, start + 2*HZ)) {
-				printk(KERN_ERR
-				"Timeout waiting for mce inject %lx\n",
+				pr_err("Timeout waiting for mce inject %lx\n",
 					*cpumask_bits(mce_inject_cpumask));
 				break;
 			}
@@ -241,7 +240,7 @@ static int inject_init(void)
 {
 	if (!alloc_cpumask_var(&mce_inject_cpumask, GFP_KERNEL))
 		return -ENOMEM;
-	printk(KERN_INFO "Machine check injector initialized\n");
+	pr_info("Machine check injector initialized\n");
 	register_mce_write_callback(mce_write);
 	register_nmi_handler(NMI_LOCAL, mce_raise_notify, 0,
 				"mce_notify");
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index 9c682c222071..5119766d9889 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/debugfs.h>
 #include <asm/mce.h>
+#include <asm/uaccess.h>
 
 #include "mce-internal.h"
 
@@ -29,7 +30,7 @@
  * panic situations)
  */
 
-enum context { IN_KERNEL = 1, IN_USER = 2 };
+enum context { IN_KERNEL = 1, IN_USER = 2, IN_KERNEL_RECOV = 3 };
 enum ser { SER_REQUIRED = 1, NO_SER = 2 };
 enum exception { EXCP_CONTEXT = 1, NO_EXCP = 2 };
 
@@ -48,6 +49,7 @@ static struct severity {
 #define MCESEV(s, m, c...) { .sev = MCE_ ## s ## _SEVERITY, .msg = m, ## c }
 #define  KERNEL		.context = IN_KERNEL
 #define  USER		.context = IN_USER
+#define  KERNEL_RECOV	.context = IN_KERNEL_RECOV
 #define  SER		.ser = SER_REQUIRED
 #define  NOSER		.ser = NO_SER
 #define  EXCP		.excp = EXCP_CONTEXT
@@ -87,6 +89,10 @@ static struct severity {
 		EXCP, KERNEL, MCGMASK(MCG_STATUS_RIPV, 0)
 		),
 	MCESEV(
+		PANIC, "In kernel and no restart IP",
+		EXCP, KERNEL_RECOV, MCGMASK(MCG_STATUS_RIPV, 0)
+		),
+	MCESEV(
 		DEFERRED, "Deferred error",
 		NOSER, MASK(MCI_STATUS_UC|MCI_STATUS_DEFERRED|MCI_STATUS_POISON, MCI_STATUS_DEFERRED)
 		),
@@ -123,6 +129,11 @@ static struct severity {
 		MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, MCG_STATUS_RIPV)
 		),
 	MCESEV(
+		AR, "Action required: data load in error recoverable area of kernel",
+		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
+		KERNEL_RECOV
+		),
+	MCESEV(
 		AR, "Action required: data load error in a user process",
 		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
 		USER
@@ -170,6 +181,9 @@ static struct severity {
 		)	/* always matches. keep at end */
 };
 
+#define mc_recoverable(mcg) (((mcg) & (MCG_STATUS_RIPV|MCG_STATUS_EIPV)) == \
+				(MCG_STATUS_RIPV|MCG_STATUS_EIPV))
+
 /*
  * If mcgstatus indicated that ip/cs on the stack were
  * no good, then "m->cs" will be zero and we will have
@@ -183,7 +197,11 @@ static struct severity {
  */
 static int error_context(struct mce *m)
 {
-	return ((m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
+	if ((m->cs & 3) == 3)
+		return IN_USER;
+	if (mc_recoverable(m->mcgstatus) && ex_has_fault_handler(m->ip))
+		return IN_KERNEL_RECOV;
+	return IN_KERNEL;
 }
 
 /*
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index c5b0d562dbf5..f0c921b03e42 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -114,7 +114,6 @@ static struct work_struct mce_work;
 static struct irq_work mce_irq_work;
 
 static void (*quirk_no_way_out)(int bank, struct mce *m, struct pt_regs *regs);
-static int mce_usable_address(struct mce *m);
 
 /*
  * CPU/chipset specific EDAC code can register a notifier call here to print
@@ -475,6 +474,28 @@ static void mce_report_event(struct pt_regs *regs)
 	irq_work_queue(&mce_irq_work);
 }
 
+/*
+ * Check if the address reported by the CPU is in a format we can parse.
+ * It would be possible to add code for most other cases, but all would
+ * be somewhat complicated (e.g. segment offset would require an instruction
+ * parser). So only support physical addresses up to page granuality for now.
+ */
+static int mce_usable_address(struct mce *m)
+{
+	if (!(m->status & MCI_STATUS_MISCV) || !(m->status & MCI_STATUS_ADDRV))
+		return 0;
+
+	/* Checks after this one are Intel-specific: */
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+		return 1;
+
+	if (MCI_MISC_ADDR_LSB(m->misc) > PAGE_SHIFT)
+		return 0;
+	if (MCI_MISC_ADDR_MODE(m->misc) != MCI_MISC_ADDR_PHYS)
+		return 0;
+	return 1;
+}
+
 static int srao_decode_notifier(struct notifier_block *nb, unsigned long val,
 				void *data)
 {
@@ -484,7 +505,7 @@ static int srao_decode_notifier(struct notifier_block *nb, unsigned long val,
 	if (!mce)
 		return NOTIFY_DONE;
 
-	if (mce->usable_addr && (mce->severity == MCE_AO_SEVERITY)) {
+	if (mce_usable_address(mce) && (mce->severity == MCE_AO_SEVERITY)) {
 		pfn = mce->addr >> PAGE_SHIFT;
 		memory_failure(pfn, MCE_VECTOR, 0);
 	}
@@ -522,10 +543,10 @@ static bool memory_error(struct mce *m)
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
 	if (c->x86_vendor == X86_VENDOR_AMD) {
-		/*
-		 * coming soon
-		 */
-		return false;
+		/* ErrCodeExt[20:16] */
+		u8 xec = (m->status >> 16) & 0x1f;
+
+		return (xec == 0x0 || xec == 0x8);
 	} else if (c->x86_vendor == X86_VENDOR_INTEL) {
 		/*
 		 * Intel SDM Volume 3B - 15.9.2 Compound Error Codes
@@ -567,7 +588,7 @@ DEFINE_PER_CPU(unsigned, mce_poll_count);
  */
 bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 {
-	bool error_logged = false;
+	bool error_seen = false;
 	struct mce m;
 	int severity;
 	int i;
@@ -601,6 +622,8 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		    (m.status & (mca_cfg.ser ? MCI_STATUS_S : MCI_STATUS_UC)))
 			continue;
 
+		error_seen = true;
+
 		mce_read_aux(&m, i);
 
 		if (!(flags & MCP_TIMESTAMP))
@@ -608,27 +631,24 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 
 		severity = mce_severity(&m, mca_cfg.tolerant, NULL, false);
 
-		/*
-		 * In the cases where we don't have a valid address after all,
-		 * do not add it into the ring buffer.
-		 */
-		if (severity == MCE_DEFERRED_SEVERITY && memory_error(&m)) {
-			if (m.status & MCI_STATUS_ADDRV) {
+		if (severity == MCE_DEFERRED_SEVERITY && memory_error(&m))
+			if (m.status & MCI_STATUS_ADDRV)
 				m.severity = severity;
-				m.usable_addr = mce_usable_address(&m);
-
-				if (!mce_gen_pool_add(&m))
-					mce_schedule_work();
-			}
-		}
 
 		/*
 		 * Don't get the IP here because it's unlikely to
 		 * have anything to do with the actual error location.
 		 */
-		if (!(flags & MCP_DONTLOG) && !mca_cfg.dont_log_ce) {
-			error_logged = true;
+		if (!(flags & MCP_DONTLOG) && !mca_cfg.dont_log_ce)
 			mce_log(&m);
+		else if (mce_usable_address(&m)) {
+			/*
+			 * Although we skipped logging this, we still want
+			 * to take action. Add to the pool so the registered
+			 * notifiers will see it.
+			 */
+			if (!mce_gen_pool_add(&m))
+				mce_schedule_work();
 		}
 
 		/*
@@ -644,7 +664,7 @@ bool machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 
 	sync_core();
 
-	return error_logged;
+	return error_seen;
 }
 EXPORT_SYMBOL_GPL(machine_check_poll);
 
@@ -931,23 +951,6 @@ reset:
 	return ret;
 }
 
-/*
- * Check if the address reported by the CPU is in a format we can parse.
- * It would be possible to add code for most other cases, but all would
- * be somewhat complicated (e.g. segment offset would require an instruction
- * parser). So only support physical addresses up to page granuality for now.
- */
-static int mce_usable_address(struct mce *m)
-{
-	if (!(m->status & MCI_STATUS_MISCV) || !(m->status & MCI_STATUS_ADDRV))
-		return 0;
-	if (MCI_MISC_ADDR_LSB(m->misc) > PAGE_SHIFT)
-		return 0;
-	if (MCI_MISC_ADDR_MODE(m->misc) != MCI_MISC_ADDR_PHYS)
-		return 0;
-	return 1;
-}
-
 static void mce_clear_state(unsigned long *toclear)
 {
 	int i;
@@ -958,6 +961,20 @@ static void mce_clear_state(unsigned long *toclear)
 	}
 }
 
+static int do_memory_failure(struct mce *m)
+{
+	int flags = MF_ACTION_REQUIRED;
+	int ret;
+
+	pr_err("Uncorrected hardware memory error in user-access at %llx", m->addr);
+	if (!(m->mcgstatus & MCG_STATUS_RIPV))
+		flags |= MF_MUST_KILL;
+	ret = memory_failure(m->addr >> PAGE_SHIFT, MCE_VECTOR, flags);
+	if (ret)
+		pr_err("Memory error not recovered");
+	return ret;
+}
+
 /*
  * The actual machine check handler. This only handles real
  * exceptions when something got corrupted coming in through int 18.
@@ -995,10 +1012,19 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
 	DECLARE_BITMAP(valid_banks, MAX_NR_BANKS);
 	char *msg = "Unknown";
-	u64 recover_paddr = ~0ull;
-	int flags = MF_ACTION_REQUIRED;
 	int lmce = 0;
 
+	/* If this CPU is offline, just bail out. */
+	if (cpu_is_offline(smp_processor_id())) {
+		u64 mcgstatus;
+
+		mcgstatus = mce_rdmsrl(MSR_IA32_MCG_STATUS);
+		if (mcgstatus & MCG_STATUS_RIPV) {
+			mce_wrmsrl(MSR_IA32_MCG_STATUS, 0);
+			return;
+		}
+	}
+
 	ist_enter(regs);
 
 	this_cpu_inc(mce_exception_count);
@@ -1089,7 +1115,6 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 
 		/* assuming valid severity level != 0 */
 		m.severity = severity;
-		m.usable_addr = mce_usable_address(&m);
 
 		mce_log(&m);
 
@@ -1123,22 +1148,13 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	}
 
 	/*
-	 * At insane "tolerant" levels we take no action. Otherwise
-	 * we only die if we have no other choice. For less serious
-	 * issues we try to recover, or limit damage to the current
-	 * process.
+	 * If tolerant is at an insane level we drop requests to kill
+	 * processes and continue even when there is no way out.
 	 */
-	if (cfg->tolerant < 3) {
-		if (no_way_out)
-			mce_panic("Fatal machine check on current CPU", &m, msg);
-		if (worst == MCE_AR_SEVERITY) {
-			recover_paddr = m.addr;
-			if (!(m.mcgstatus & MCG_STATUS_RIPV))
-				flags |= MF_MUST_KILL;
-		} else if (kill_it) {
-			force_sig(SIGBUS, current);
-		}
-	}
+	if (cfg->tolerant == 3)
+		kill_it = 0;
+	else if (no_way_out)
+		mce_panic("Fatal machine check on current CPU", &m, msg);
 
 	if (worst > 0)
 		mce_report_event(regs);
@@ -1146,25 +1162,24 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 out:
 	sync_core();
 
-	if (recover_paddr == ~0ull)
-		goto done;
+	if (worst != MCE_AR_SEVERITY && !kill_it)
+		goto out_ist;
 
-	pr_err("Uncorrected hardware memory error in user-access at %llx",
-		 recover_paddr);
-	/*
-	 * We must call memory_failure() here even if the current process is
-	 * doomed. We still need to mark the page as poisoned and alert any
-	 * other users of the page.
-	 */
-	ist_begin_non_atomic(regs);
-	local_irq_enable();
-	if (memory_failure(recover_paddr >> PAGE_SHIFT, MCE_VECTOR, flags) < 0) {
-		pr_err("Memory error not recovered");
-		force_sig(SIGBUS, current);
+	/* Fault was in user mode and we need to take some action */
+	if ((m.cs & 3) == 3) {
+		ist_begin_non_atomic(regs);
+		local_irq_enable();
+
+		if (kill_it || do_memory_failure(&m))
+			force_sig(SIGBUS, current);
+		local_irq_disable();
+		ist_end_non_atomic();
+	} else {
+		if (!fixup_exception(regs, X86_TRAP_MC))
+			mce_panic("Failed kernel mode recovery", &m, NULL);
 	}
-	local_irq_disable();
-	ist_end_non_atomic();
-done:
+
+out_ist:
 	ist_exit(regs);
 }
 EXPORT_SYMBOL_GPL(do_machine_check);
@@ -1563,6 +1578,17 @@ static int __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 
 		if (c->x86 == 6 && c->x86_model == 45)
 			quirk_no_way_out = quirk_sandybridge_ifu;
+		/*
+		 * MCG_CAP.MCG_SER_P is necessary but not sufficient to know
+		 * whether this processor will actually generate recoverable
+		 * machine checks. Check to see if this is an E7 model Xeon.
+		 * We can't do a model number check because E5 and E7 use the
+		 * same model number. E5 doesn't support recovery, E7 does.
+		 */
+		if (mca_cfg.recovery || (mca_cfg.ser &&
+			!strncmp(c->x86_model_id,
+				 "Intel(R) Xeon(R) CPU E7-", 24)))
+			set_cpu_cap(c, X86_FEATURE_MCE_RECOVERY);
 	}
 	if (cfg->monarch_timeout < 0)
 		cfg->monarch_timeout = 0;
@@ -1604,10 +1630,10 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 	case X86_VENDOR_AMD: {
 		u32 ebx = cpuid_ebx(0x80000007);
 
-		mce_amd_feature_init(c);
 		mce_flags.overflow_recov = !!(ebx & BIT(0));
 		mce_flags.succor	 = !!(ebx & BIT(1));
 		mce_flags.smca		 = !!(ebx & BIT(3));
+		mce_amd_feature_init(c);
 
 		break;
 		}
@@ -2015,6 +2041,8 @@ static int __init mcheck_enable(char *str)
 		cfg->bootlog = (str[0] == 'b');
 	else if (!strcmp(str, "bios_cmci_threshold"))
 		cfg->bios_cmci_threshold = true;
+	else if (!strcmp(str, "recovery"))
+		cfg->recovery = true;
 	else if (isdigit(str[0])) {
 		if (get_option(&str, &cfg->tolerant) == 2)
 			get_option(&str, &(cfg->monarch_timeout));
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index e99b15077e94..9d656fd436ef 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -1,5 +1,5 @@
 /*
- *  (c) 2005-2015 Advanced Micro Devices, Inc.
+ *  (c) 2005-2016 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -28,7 +28,7 @@
 #include <asm/msr.h>
 #include <asm/trace/irq_vectors.h>
 
-#define NR_BLOCKS         9
+#define NR_BLOCKS         5
 #define THRESHOLD_MAX     0xFFF
 #define INT_TYPE_APIC     0x00020000
 #define MASK_VALID_HI     0x80000000
@@ -49,6 +49,19 @@
 #define DEF_LVT_OFF		0x2
 #define DEF_INT_TYPE_APIC	0x2
 
+/* Scalable MCA: */
+
+/* Threshold LVT offset is at MSR0xC0000410[15:12] */
+#define SMCA_THR_LVT_OFF	0xF000
+
+/*
+ * OS is required to set the MCAX bit to acknowledge that it is now using the
+ * new MSR ranges and new registers under each bank. It also means that the OS
+ * will configure deferred errors in the new MCx_CONFIG register. If the bit is
+ * not set, uncorrectable errors will cause a system panic.
+ */
+#define SMCA_MCAX_EN_OFF	0x1
+
 static const char * const th_names[] = {
 	"load_store",
 	"insn_fetch",
@@ -58,6 +71,35 @@ static const char * const th_names[] = {
 	"execution_unit",
 };
 
+/* Define HWID to IP type mappings for Scalable MCA */
+struct amd_hwid amd_hwids[] = {
+	[SMCA_F17H_CORE]	= { "f17h_core",	0xB0 },
+	[SMCA_DF]		= { "data_fabric",	0x2E },
+	[SMCA_UMC]		= { "umc",		0x96 },
+	[SMCA_PB]		= { "param_block",	0x5 },
+	[SMCA_PSP]		= { "psp",		0xFF },
+	[SMCA_SMU]		= { "smu",		0x1 },
+};
+EXPORT_SYMBOL_GPL(amd_hwids);
+
+const char * const amd_core_mcablock_names[] = {
+	[SMCA_LS]		= "load_store",
+	[SMCA_IF]		= "insn_fetch",
+	[SMCA_L2_CACHE]		= "l2_cache",
+	[SMCA_DE]		= "decode_unit",
+	[RES]			= "",
+	[SMCA_EX]		= "execution_unit",
+	[SMCA_FP]		= "floating_point",
+	[SMCA_L3_CACHE]		= "l3_cache",
+};
+EXPORT_SYMBOL_GPL(amd_core_mcablock_names);
+
+const char * const amd_df_mcablock_names[] = {
+	[SMCA_CS]		= "coherent_slave",
+	[SMCA_PIE]		= "pie",
+};
+EXPORT_SYMBOL_GPL(amd_df_mcablock_names);
+
 static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
 static DEFINE_PER_CPU(unsigned char, bank_map);	/* see which banks are on */
 
@@ -84,6 +126,13 @@ struct thresh_restart {
 
 static inline bool is_shared_bank(int bank)
 {
+	/*
+	 * Scalable MCA provides for only one core to have access to the MSRs of
+	 * a shared bank.
+	 */
+	if (mce_flags.smca)
+		return false;
+
 	/* Bank 4 is for northbridge reporting and is thus shared */
 	return (bank == 4);
 }
@@ -135,6 +184,14 @@ static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 	}
 
 	if (apic != msr) {
+		/*
+		 * On SMCA CPUs, LVT offset is programmed at a different MSR, and
+		 * the BIOS provides the value. The original field where LVT offset
+		 * was set is reserved. Return early here:
+		 */
+		if (mce_flags.smca)
+			return 0;
+
 		pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d "
 		       "for bank %d, block %d (MSR%08X=0x%x%08x)\n",
 		       b->cpu, apic, b->bank, b->block, b->address, hi, lo);
@@ -144,10 +201,7 @@ static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 	return 1;
 };
 
-/*
- * Called via smp_call_function_single(), must be called with correct
- * cpu affinity.
- */
+/* Reprogram MCx_MISC MSR behind this threshold bank. */
 static void threshold_restart_bank(void *_tr)
 {
 	struct thresh_restart *tr = _tr;
@@ -247,27 +301,116 @@ static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
 	wrmsr(MSR_CU_DEF_ERR, low, high);
 }
 
+static u32 get_block_address(u32 current_addr, u32 low, u32 high,
+			     unsigned int bank, unsigned int block)
+{
+	u32 addr = 0, offset = 0;
+
+	if (mce_flags.smca) {
+		if (!block) {
+			addr = MSR_AMD64_SMCA_MCx_MISC(bank);
+		} else {
+			/*
+			 * For SMCA enabled processors, BLKPTR field of the
+			 * first MISC register (MCx_MISC0) indicates presence of
+			 * additional MISC register set (MISC1-4).
+			 */
+			u32 low, high;
+
+			if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
+				return addr;
+
+			if (!(low & MCI_CONFIG_MCAX))
+				return addr;
+
+			if (!rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
+			    (low & MASK_BLKPTR_LO))
+				addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
+		}
+		return addr;
+	}
+
+	/* Fall back to method we used for older processors: */
+	switch (block) {
+	case 0:
+		addr = MSR_IA32_MCx_MISC(bank);
+		break;
+	case 1:
+		offset = ((low & MASK_BLKPTR_LO) >> 21);
+		if (offset)
+			addr = MCG_XBLK_ADDR + offset;
+		break;
+	default:
+		addr = ++current_addr;
+	}
+	return addr;
+}
+
+static int
+prepare_threshold_block(unsigned int bank, unsigned int block, u32 addr,
+			int offset, u32 misc_high)
+{
+	unsigned int cpu = smp_processor_id();
+	struct threshold_block b;
+	int new;
+
+	if (!block)
+		per_cpu(bank_map, cpu) |= (1 << bank);
+
+	memset(&b, 0, sizeof(b));
+	b.cpu			= cpu;
+	b.bank			= bank;
+	b.block			= block;
+	b.address		= addr;
+	b.interrupt_capable	= lvt_interrupt_supported(bank, misc_high);
+
+	if (!b.interrupt_capable)
+		goto done;
+
+	b.interrupt_enable = 1;
+
+	if (mce_flags.smca) {
+		u32 smca_low, smca_high;
+		u32 smca_addr = MSR_AMD64_SMCA_MCx_CONFIG(bank);
+
+		if (!rdmsr_safe(smca_addr, &smca_low, &smca_high)) {
+			smca_high |= SMCA_MCAX_EN_OFF;
+			wrmsr(smca_addr, smca_low, smca_high);
+		}
+
+		/* Gather LVT offset for thresholding: */
+		if (rdmsr_safe(MSR_CU_DEF_ERR, &smca_low, &smca_high))
+			goto out;
+
+		new = (smca_low & SMCA_THR_LVT_OFF) >> 12;
+	} else {
+		new = (misc_high & MASK_LVTOFF_HI) >> 20;
+	}
+
+	offset = setup_APIC_mce_threshold(offset, new);
+
+	if ((offset == new) && (mce_threshold_vector != amd_threshold_interrupt))
+		mce_threshold_vector = amd_threshold_interrupt;
+
+done:
+	mce_threshold_block_init(&b, offset);
+
+out:
+	return offset;
+}
+
 /* cpu init entry point, called from mce.c with preempt off */
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
-	struct threshold_block b;
-	unsigned int cpu = smp_processor_id();
 	u32 low = 0, high = 0, address = 0;
 	unsigned int bank, block;
-	int offset = -1, new;
+	int offset = -1;
 
 	for (bank = 0; bank < mca_cfg.banks; ++bank) {
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			if (block == 0)
-				address = MSR_IA32_MCx_MISC(bank);
-			else if (block == 1) {
-				address = (low & MASK_BLKPTR_LO) >> 21;
-				if (!address)
-					break;
-
-				address += MCG_XBLK_ADDR;
-			} else
-				++address;
+			address = get_block_address(address, low, high, bank, block);
+			if (!address)
+				break;
 
 			if (rdmsr_safe(address, &low, &high))
 				break;
@@ -279,29 +422,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 			     (high & MASK_LOCKED_HI))
 				continue;
 
-			if (!block)
-				per_cpu(bank_map, cpu) |= (1 << bank);
-
-			memset(&b, 0, sizeof(b));
-			b.cpu			= cpu;
-			b.bank			= bank;
-			b.block			= block;
-			b.address		= address;
-			b.interrupt_capable	= lvt_interrupt_supported(bank, high);
-
-			if (!b.interrupt_capable)
-				goto init;
-
-			b.interrupt_enable = 1;
-			new	= (high & MASK_LVTOFF_HI) >> 20;
-			offset  = setup_APIC_mce_threshold(offset, new);
-
-			if ((offset == new) &&
-			    (mce_threshold_vector != amd_threshold_interrupt))
-				mce_threshold_vector = amd_threshold_interrupt;
-
-init:
-			mce_threshold_block_init(&b, offset);
+			offset = prepare_threshold_block(bank, block, address, offset, high);
 		}
 	}
 
@@ -394,16 +515,9 @@ static void amd_threshold_interrupt(void)
 		if (!(per_cpu(bank_map, cpu) & (1 << bank)))
 			continue;
 		for (block = 0; block < NR_BLOCKS; ++block) {
-			if (block == 0) {
-				address = MSR_IA32_MCx_MISC(bank);
-			} else if (block == 1) {
-				address = (low & MASK_BLKPTR_LO) >> 21;
-				if (!address)
-					break;
-				address += MCG_XBLK_ADDR;
-			} else {
-				++address;
-			}
+			address = get_block_address(address, low, high, bank, block);
+			if (!address)
+				break;
 
 			if (rdmsr_safe(address, &low, &high))
 				break;
@@ -623,16 +737,11 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank,
 	if (err)
 		goto out_free;
 recurse:
-	if (!block) {
-		address = (low & MASK_BLKPTR_LO) >> 21;
-		if (!address)
-			return 0;
-		address += MCG_XBLK_ADDR;
-	} else {
-		++address;
-	}
+	address = get_block_address(address, low, high, bank, ++block);
+	if (!address)
+		return 0;
 
-	err = allocate_threshold_blocks(cpu, bank, ++block, address);
+	err = allocate_threshold_blocks(cpu, bank, block, address);
 	if (err)
 		goto out_free;
 
diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index 12402e10aeff..2a0717bf8033 100644
--- a/arch/x86/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
@@ -26,14 +26,12 @@ static void pentium_machine_check(struct pt_regs *regs, long error_code)
 	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
 	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
 
-	printk(KERN_EMERG
-		"CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n",
-		smp_processor_id(), loaddr, lotype);
+	pr_emerg("CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n",
+		 smp_processor_id(), loaddr, lotype);
 
 	if (lotype & (1<<5)) {
-		printk(KERN_EMERG
-			"CPU#%d: Possible thermal failure (CPU on fire ?).\n",
-			smp_processor_id());
+		pr_emerg("CPU#%d: Possible thermal failure (CPU on fire ?).\n",
+			 smp_processor_id());
 	}
 
 	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
@@ -61,12 +59,10 @@ void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 	/* Read registers before enabling: */
 	rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
 	rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
-	printk(KERN_INFO
-	       "Intel old style machine check architecture supported.\n");
+	pr_info("Intel old style machine check architecture supported.\n");
 
 	/* Enable MCE: */
 	cr4_set_bits(X86_CR4_MCE);
-	printk(KERN_INFO
-	       "Intel old style machine check reporting enabled on CPU#%d.\n",
-	       smp_processor_id());
+	pr_info("Intel old style machine check reporting enabled on CPU#%d.\n",
+		smp_processor_id());
 }
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 2c5aaf8c2e2f..ac780cad3b86 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -190,7 +190,7 @@ static int therm_throt_process(bool new_event, int event, int level)
 	/* if we just entered the thermal event */
 	if (new_event) {
 		if (event == THERMAL_THROTTLING_EVENT)
-			printk(KERN_CRIT "CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
+			pr_crit("CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
 				this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package",
 				state->count);
@@ -198,8 +198,7 @@ static int therm_throt_process(bool new_event, int event, int level)
 	}
 	if (old_event) {
 		if (event == THERMAL_THROTTLING_EVENT)
-			printk(KERN_INFO "CPU%d: %s temperature/speed normal\n",
-				this_cpu,
+			pr_info("CPU%d: %s temperature/speed normal\n", this_cpu,
 				level == CORE_LEVEL ? "Core" : "Package");
 		return 1;
 	}
@@ -385,6 +384,9 @@ static void intel_thermal_interrupt(void)
 {
 	__u64 msr_val;
 
+	if (static_cpu_has(X86_FEATURE_HWP))
+		wrmsrl_safe(MSR_HWP_STATUS, 0);
+
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
 
 	/* Check for violation of core thermal thresholds*/
@@ -417,8 +419,8 @@ static void intel_thermal_interrupt(void)
 
 static void unexpected_thermal_interrupt(void)
 {
-	printk(KERN_ERR "CPU%d: Unexpected LVT thermal interrupt!\n",
-			smp_processor_id());
+	pr_err("CPU%d: Unexpected LVT thermal interrupt!\n",
+		smp_processor_id());
 }
 
 static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
@@ -499,7 +501,7 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 
 	if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
 		if (system_state == SYSTEM_BOOTING)
-			printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+			pr_debug("CPU%d: Thermal monitoring handled by SMI\n", cpu);
 		return;
 	}
 
@@ -557,8 +559,8 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
 	l = apic_read(APIC_LVTTHMR);
 	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 
-	printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n",
-		       tm2 ? "TM2" : "TM1");
+	pr_info_once("CPU0: Thermal monitoring enabled (%s)\n",
+		      tm2 ? "TM2" : "TM1");
 
 	/* enable thermal throttle processing */
 	atomic_set(&therm_throt_en, 1);
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c
index 7245980186ee..fcf9ae9384f4 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -12,8 +12,8 @@
 
 static void default_threshold_interrupt(void)
 {
-	printk(KERN_ERR "Unexpected threshold interrupt at vector %x\n",
-			 THRESHOLD_APIC_VECTOR);
+	pr_err("Unexpected threshold interrupt at vector %x\n",
+		THRESHOLD_APIC_VECTOR);
 }
 
 void (*mce_threshold_vector)(void) = default_threshold_interrupt;
diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 01dd8702880b..c6a722e1d011 100644
--- a/arch/x86/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
@@ -17,7 +17,7 @@ static void winchip_machine_check(struct pt_regs *regs, long error_code)
 {
 	ist_enter(regs);
 
-	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
+	pr_emerg("CPU0: Machine Check Exception.\n");
 	add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
 
 	ist_exit(regs);
@@ -39,6 +39,5 @@ void winchip_mcheck_init(struct cpuinfo_x86 *c)
 
 	cr4_set_bits(X86_CR4_MCE);
 
-	printk(KERN_INFO
-	       "Winchip machine check reporting enabled on CPU#0.\n");
+	pr_info("Winchip machine check reporting enabled on CPU#0.\n");
 }
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 2233f8a76615..8581963894c7 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -431,10 +431,6 @@ int __init save_microcode_in_initrd_amd(void)
 	else
 		container = cont_va;
 
-	if (ucode_new_rev)
-		pr_info("microcode: updated early to new patch_level=0x%08x\n",
-			ucode_new_rev);
-
 	eax   = cpuid_eax(0x00000001);
 	eax   = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff);
 
@@ -469,8 +465,7 @@ void reload_ucode_amd(void)
 	if (mc && rev < mc->hdr.patch_id) {
 		if (!__apply_microcode_amd(mc)) {
 			ucode_new_rev = mc->hdr.patch_id;
-			pr_info("microcode: reload patch_level=0x%08x\n",
-				ucode_new_rev);
+			pr_info("reload patch_level=0x%08x\n", ucode_new_rev);
 		}
 	}
 }
@@ -793,15 +788,13 @@ static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover)
 		return -EINVAL;
 	}
 
-	patch->data = kzalloc(patch_size, GFP_KERNEL);
+	patch->data = kmemdup(fw + SECTION_HDR_SIZE, patch_size, GFP_KERNEL);
 	if (!patch->data) {
 		pr_err("Patch data allocation failure.\n");
 		kfree(patch);
 		return -EINVAL;
 	}
 
-	/* All looks ok, copy patch... */
-	memcpy(patch->data, fw + SECTION_HDR_SIZE, patch_size);
 	INIT_LIST_HEAD(&patch->plist);
 	patch->patch_id  = mc_hdr->patch_id;
 	patch->equiv_cpu = proc_id;
@@ -953,10 +946,14 @@ struct microcode_ops * __init init_amd_microcode(void)
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 
 	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
-		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
+		pr_warn("AMD CPU family 0x%x not supported\n", c->x86);
 		return NULL;
 	}
 
+	if (ucode_new_rev)
+		pr_info_once("microcode updated early to new patch_level=0x%08x\n",
+			     ucode_new_rev);
+
 	return &microcode_amd_ops;
 }
 
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 7fc27f1cca58..ac360bfbbdb6 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -43,16 +43,8 @@
 #define MICROCODE_VERSION	"2.01"
 
 static struct microcode_ops	*microcode_ops;
-
 static bool dis_ucode_ldr;
 
-static int __init disable_loader(char *str)
-{
-	dis_ucode_ldr = true;
-	return 1;
-}
-__setup("dis_ucode_ldr", disable_loader);
-
 /*
  * Synchronization.
  *
@@ -81,15 +73,16 @@ struct cpu_info_ctx {
 
 static bool __init check_loader_disabled_bsp(void)
 {
+	static const char *__dis_opt_str = "dis_ucode_ldr";
+
 #ifdef CONFIG_X86_32
 	const char *cmdline = (const char *)__pa_nodebug(boot_command_line);
-	const char *opt	    = "dis_ucode_ldr";
-	const char *option  = (const char *)__pa_nodebug(opt);
+	const char *option  = (const char *)__pa_nodebug(__dis_opt_str);
 	bool *res = (bool *)__pa_nodebug(&dis_ucode_ldr);
 
 #else /* CONFIG_X86_64 */
 	const char *cmdline = boot_command_line;
-	const char *option  = "dis_ucode_ldr";
+	const char *option  = __dis_opt_str;
 	bool *res = &dis_ucode_ldr;
 #endif
 
@@ -129,8 +122,8 @@ void __init load_ucode_bsp(void)
 	if (!have_cpuid_p())
 		return;
 
-	vendor = x86_vendor();
-	family = x86_family();
+	vendor = x86_cpuid_vendor();
+	family = x86_cpuid_family();
 
 	switch (vendor) {
 	case X86_VENDOR_INTEL:
@@ -165,8 +158,8 @@ void load_ucode_ap(void)
 	if (!have_cpuid_p())
 		return;
 
-	vendor = x86_vendor();
-	family = x86_family();
+	vendor = x86_cpuid_vendor();
+	family = x86_cpuid_family();
 
 	switch (vendor) {
 	case X86_VENDOR_INTEL:
@@ -206,8 +199,8 @@ void reload_early_microcode(void)
 {
 	int vendor, family;
 
-	vendor = x86_vendor();
-	family = x86_family();
+	vendor = x86_cpuid_vendor();
+	family = x86_cpuid_family();
 
 	switch (vendor) {
 	case X86_VENDOR_INTEL:
@@ -479,7 +472,7 @@ static enum ucode_state microcode_init_cpu(int cpu, bool refresh_fw)
 	enum ucode_state ustate;
 	struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
 
-	if (uci && uci->valid)
+	if (uci->valid)
 		return UCODE_OK;
 
 	if (collect_cpu_info(cpu))
@@ -630,7 +623,7 @@ int __init microcode_init(void)
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 	int error;
 
-	if (paravirt_enabled() || dis_ucode_ldr)
+	if (dis_ucode_ldr)
 		return -EINVAL;
 
 	if (c->x86_vendor == X86_VENDOR_INTEL)
@@ -698,3 +691,4 @@ int __init microcode_init(void)
 	return error;
 
 }
+late_initcall(microcode_init);
diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c
index ce47402eb2f9..cbb3cf09b065 100644
--- a/arch/x86/kernel/cpu/microcode/intel.c
+++ b/arch/x86/kernel/cpu/microcode/intel.c
@@ -39,9 +39,15 @@
 #include <asm/setup.h>
 #include <asm/msr.h>
 
-static unsigned long mc_saved_in_initrd[MAX_UCODE_COUNT];
+/*
+ * Temporary microcode blobs pointers storage. We note here the pointers to
+ * microcode blobs we've got from whatever storage (detached initrd, builtin).
+ * Later on, we put those into final storage mc_saved_data.mc_saved.
+ */
+static unsigned long mc_tmp_ptrs[MAX_UCODE_COUNT];
+
 static struct mc_saved_data {
-	unsigned int mc_saved_count;
+	unsigned int num_saved;
 	struct microcode_intel **mc_saved;
 } mc_saved_data;
 
@@ -78,53 +84,50 @@ load_microcode_early(struct microcode_intel **saved,
 }
 
 static inline void
-copy_initrd_ptrs(struct microcode_intel **mc_saved, unsigned long *initrd,
-		  unsigned long off, int num_saved)
+copy_ptrs(struct microcode_intel **mc_saved, unsigned long *mc_ptrs,
+	  unsigned long off, int num_saved)
 {
 	int i;
 
 	for (i = 0; i < num_saved; i++)
-		mc_saved[i] = (struct microcode_intel *)(initrd[i] + off);
+		mc_saved[i] = (struct microcode_intel *)(mc_ptrs[i] + off);
 }
 
 #ifdef CONFIG_X86_32
 static void
-microcode_phys(struct microcode_intel **mc_saved_tmp,
-	       struct mc_saved_data *mc_saved_data)
+microcode_phys(struct microcode_intel **mc_saved_tmp, struct mc_saved_data *mcs)
 {
 	int i;
 	struct microcode_intel ***mc_saved;
 
-	mc_saved = (struct microcode_intel ***)
-		   __pa_nodebug(&mc_saved_data->mc_saved);
-	for (i = 0; i < mc_saved_data->mc_saved_count; i++) {
+	mc_saved = (struct microcode_intel ***)__pa_nodebug(&mcs->mc_saved);
+
+	for (i = 0; i < mcs->num_saved; i++) {
 		struct microcode_intel *p;
 
-		p = *(struct microcode_intel **)
-			__pa_nodebug(mc_saved_data->mc_saved + i);
+		p = *(struct microcode_intel **)__pa_nodebug(mcs->mc_saved + i);
 		mc_saved_tmp[i] = (struct microcode_intel *)__pa_nodebug(p);
 	}
 }
 #endif
 
 static enum ucode_state
-load_microcode(struct mc_saved_data *mc_saved_data, unsigned long *initrd,
-	       unsigned long initrd_start, struct ucode_cpu_info *uci)
+load_microcode(struct mc_saved_data *mcs, unsigned long *mc_ptrs,
+	       unsigned long offset, struct ucode_cpu_info *uci)
 {
 	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
-	unsigned int count = mc_saved_data->mc_saved_count;
+	unsigned int count = mcs->num_saved;
 
-	if (!mc_saved_data->mc_saved) {
-		copy_initrd_ptrs(mc_saved_tmp, initrd, initrd_start, count);
+	if (!mcs->mc_saved) {
+		copy_ptrs(mc_saved_tmp, mc_ptrs, offset, count);
 
 		return load_microcode_early(mc_saved_tmp, count, uci);
 	} else {
 #ifdef CONFIG_X86_32
-		microcode_phys(mc_saved_tmp, mc_saved_data);
+		microcode_phys(mc_saved_tmp, mcs);
 		return load_microcode_early(mc_saved_tmp, count, uci);
 #else
-		return load_microcode_early(mc_saved_data->mc_saved,
-						    count, uci);
+		return load_microcode_early(mcs->mc_saved, count, uci);
 #endif
 	}
 }
@@ -145,10 +148,10 @@ matching_model_microcode(struct microcode_header_intel *mc_header,
 	int ext_sigcount, i;
 	struct extended_signature *ext_sig;
 
-	fam   = __x86_family(sig);
+	fam   = x86_family(sig);
 	model = x86_model(sig);
 
-	fam_ucode   = __x86_family(mc_header->sig);
+	fam_ucode   = x86_family(mc_header->sig);
 	model_ucode = x86_model(mc_header->sig);
 
 	if (fam == fam_ucode && model == model_ucode)
@@ -163,7 +166,7 @@ matching_model_microcode(struct microcode_header_intel *mc_header,
 	ext_sigcount = ext_header->count;
 
 	for (i = 0; i < ext_sigcount; i++) {
-		fam_ucode   = __x86_family(ext_sig->sig);
+		fam_ucode   = x86_family(ext_sig->sig);
 		model_ucode = x86_model(ext_sig->sig);
 
 		if (fam == fam_ucode && model == model_ucode)
@@ -175,25 +178,25 @@ matching_model_microcode(struct microcode_header_intel *mc_header,
 }
 
 static int
-save_microcode(struct mc_saved_data *mc_saved_data,
+save_microcode(struct mc_saved_data *mcs,
 	       struct microcode_intel **mc_saved_src,
-	       unsigned int mc_saved_count)
+	       unsigned int num_saved)
 {
 	int i, j;
 	struct microcode_intel **saved_ptr;
 	int ret;
 
-	if (!mc_saved_count)
+	if (!num_saved)
 		return -EINVAL;
 
 	/*
 	 * Copy new microcode data.
 	 */
-	saved_ptr = kcalloc(mc_saved_count, sizeof(struct microcode_intel *), GFP_KERNEL);
+	saved_ptr = kcalloc(num_saved, sizeof(struct microcode_intel *), GFP_KERNEL);
 	if (!saved_ptr)
 		return -ENOMEM;
 
-	for (i = 0; i < mc_saved_count; i++) {
+	for (i = 0; i < num_saved; i++) {
 		struct microcode_header_intel *mc_hdr;
 		struct microcode_intel *mc;
 		unsigned long size;
@@ -207,20 +210,18 @@ save_microcode(struct mc_saved_data *mc_saved_data,
 		mc_hdr = &mc->hdr;
 		size   = get_totalsize(mc_hdr);
 
-		saved_ptr[i] = kmalloc(size, GFP_KERNEL);
+		saved_ptr[i] = kmemdup(mc, size, GFP_KERNEL);
 		if (!saved_ptr[i]) {
 			ret = -ENOMEM;
 			goto err;
 		}
-
-		memcpy(saved_ptr[i], mc, size);
 	}
 
 	/*
 	 * Point to newly saved microcode.
 	 */
-	mc_saved_data->mc_saved = saved_ptr;
-	mc_saved_data->mc_saved_count = mc_saved_count;
+	mcs->mc_saved  = saved_ptr;
+	mcs->num_saved = num_saved;
 
 	return 0;
 
@@ -284,22 +285,20 @@ static unsigned int _save_mc(struct microcode_intel **mc_saved,
  * BSP can stay in the platform.
  */
 static enum ucode_state __init
-get_matching_model_microcode(int cpu, unsigned long start,
-			     void *data, size_t size,
-			     struct mc_saved_data *mc_saved_data,
-			     unsigned long *mc_saved_in_initrd,
+get_matching_model_microcode(unsigned long start, void *data, size_t size,
+			     struct mc_saved_data *mcs, unsigned long *mc_ptrs,
 			     struct ucode_cpu_info *uci)
 {
-	u8 *ucode_ptr = data;
-	unsigned int leftover = size;
+	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
+	struct microcode_header_intel *mc_header;
+	unsigned int num_saved = mcs->num_saved;
 	enum ucode_state state = UCODE_OK;
+	unsigned int leftover = size;
+	u8 *ucode_ptr = data;
 	unsigned int mc_size;
-	struct microcode_header_intel *mc_header;
-	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
-	unsigned int mc_saved_count = mc_saved_data->mc_saved_count;
 	int i;
 
-	while (leftover && mc_saved_count < ARRAY_SIZE(mc_saved_tmp)) {
+	while (leftover && num_saved < ARRAY_SIZE(mc_saved_tmp)) {
 
 		if (leftover < sizeof(mc_header))
 			break;
@@ -318,32 +317,31 @@ get_matching_model_microcode(int cpu, unsigned long start,
 		 * the platform, we need to find and save microcode patches
 		 * with the same family and model as the BSP.
 		 */
-		if (matching_model_microcode(mc_header, uci->cpu_sig.sig) !=
-			 UCODE_OK) {
+		if (matching_model_microcode(mc_header, uci->cpu_sig.sig) != UCODE_OK) {
 			ucode_ptr += mc_size;
 			continue;
 		}
 
-		mc_saved_count = _save_mc(mc_saved_tmp, ucode_ptr, mc_saved_count);
+		num_saved = _save_mc(mc_saved_tmp, ucode_ptr, num_saved);
 
 		ucode_ptr += mc_size;
 	}
 
 	if (leftover) {
 		state = UCODE_ERROR;
-		goto out;
+		return state;
 	}
 
-	if (mc_saved_count == 0) {
+	if (!num_saved) {
 		state = UCODE_NFOUND;
-		goto out;
+		return state;
 	}
 
-	for (i = 0; i < mc_saved_count; i++)
-		mc_saved_in_initrd[i] = (unsigned long)mc_saved_tmp[i] - start;
+	for (i = 0; i < num_saved; i++)
+		mc_ptrs[i] = (unsigned long)mc_saved_tmp[i] - start;
+
+	mcs->num_saved = num_saved;
 
-	mc_saved_data->mc_saved_count = mc_saved_count;
-out:
 	return state;
 }
 
@@ -365,7 +363,7 @@ static int collect_cpu_info_early(struct ucode_cpu_info *uci)
 	native_cpuid(&eax, &ebx, &ecx, &edx);
 	csig.sig = eax;
 
-	family = __x86_family(csig.sig);
+	family = x86_family(csig.sig);
 	model  = x86_model(csig.sig);
 
 	if ((model >= 5) || (family > 6)) {
@@ -373,7 +371,7 @@ static int collect_cpu_info_early(struct ucode_cpu_info *uci)
 		native_rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
 		csig.pf = 1 << ((val[1] >> 18) & 7);
 	}
-	native_wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+	native_wrmsrl(MSR_IA32_UCODE_REV, 0);
 
 	/* As documented in the SDM: Do a CPUID 1 here */
 	sync_core();
@@ -396,11 +394,11 @@ static void show_saved_mc(void)
 	unsigned int sig, pf, rev, total_size, data_size, date;
 	struct ucode_cpu_info uci;
 
-	if (mc_saved_data.mc_saved_count == 0) {
+	if (!mc_saved_data.num_saved) {
 		pr_debug("no microcode data saved.\n");
 		return;
 	}
-	pr_debug("Total microcode saved: %d\n", mc_saved_data.mc_saved_count);
+	pr_debug("Total microcode saved: %d\n", mc_saved_data.num_saved);
 
 	collect_cpu_info_early(&uci);
 
@@ -409,7 +407,7 @@ static void show_saved_mc(void)
 	rev = uci.cpu_sig.rev;
 	pr_debug("CPU: sig=0x%x, pf=0x%x, rev=0x%x\n", sig, pf, rev);
 
-	for (i = 0; i < mc_saved_data.mc_saved_count; i++) {
+	for (i = 0; i < mc_saved_data.num_saved; i++) {
 		struct microcode_header_intel *mc_saved_header;
 		struct extended_sigtable *ext_header;
 		int ext_sigcount;
@@ -465,7 +463,7 @@ int save_mc_for_early(u8 *mc)
 {
 	struct microcode_intel *mc_saved_tmp[MAX_UCODE_COUNT];
 	unsigned int mc_saved_count_init;
-	unsigned int mc_saved_count;
+	unsigned int num_saved;
 	struct microcode_intel **mc_saved;
 	int ret = 0;
 	int i;
@@ -476,23 +474,23 @@ int save_mc_for_early(u8 *mc)
 	 */
 	mutex_lock(&x86_cpu_microcode_mutex);
 
-	mc_saved_count_init = mc_saved_data.mc_saved_count;
-	mc_saved_count = mc_saved_data.mc_saved_count;
+	mc_saved_count_init = mc_saved_data.num_saved;
+	num_saved = mc_saved_data.num_saved;
 	mc_saved = mc_saved_data.mc_saved;
 
-	if (mc_saved && mc_saved_count)
+	if (mc_saved && num_saved)
 		memcpy(mc_saved_tmp, mc_saved,
-		       mc_saved_count * sizeof(struct microcode_intel *));
+		       num_saved * sizeof(struct microcode_intel *));
 	/*
 	 * Save the microcode patch mc in mc_save_tmp structure if it's a newer
 	 * version.
 	 */
-	mc_saved_count = _save_mc(mc_saved_tmp, mc, mc_saved_count);
+	num_saved = _save_mc(mc_saved_tmp, mc, num_saved);
 
 	/*
 	 * Save the mc_save_tmp in global mc_saved_data.
 	 */
-	ret = save_microcode(&mc_saved_data, mc_saved_tmp, mc_saved_count);
+	ret = save_microcode(&mc_saved_data, mc_saved_tmp, num_saved);
 	if (ret) {
 		pr_err("Cannot save microcode patch.\n");
 		goto out;
@@ -521,16 +519,12 @@ static bool __init load_builtin_intel_microcode(struct cpio_data *cp)
 {
 #ifdef CONFIG_X86_64
 	unsigned int eax = 0x00000001, ebx, ecx = 0, edx;
-	unsigned int family, model, stepping;
 	char name[30];
 
 	native_cpuid(&eax, &ebx, &ecx, &edx);
 
-	family   = __x86_family(eax);
-	model    = x86_model(eax);
-	stepping = eax & 0xf;
-
-	sprintf(name, "intel-ucode/%02x-%02x-%02x", family, model, stepping);
+	sprintf(name, "intel-ucode/%02x-%02x-%02x",
+		      x86_family(eax), x86_model(eax), x86_stepping(eax));
 
 	return get_builtin_firmware(cp, name);
 #else
@@ -540,7 +534,7 @@ static bool __init load_builtin_intel_microcode(struct cpio_data *cp)
 
 static __initdata char ucode_name[] = "kernel/x86/microcode/GenuineIntel.bin";
 static __init enum ucode_state
-scan_microcode(struct mc_saved_data *mc_saved_data, unsigned long *initrd,
+scan_microcode(struct mc_saved_data *mcs, unsigned long *mc_ptrs,
 	       unsigned long start, unsigned long size,
 	       struct ucode_cpu_info *uci)
 {
@@ -555,14 +549,18 @@ scan_microcode(struct mc_saved_data *mc_saved_data, unsigned long *initrd,
 	cd.data = NULL;
 	cd.size = 0;
 
-	cd = find_cpio_data(p, (void *)start, size, &offset);
-	if (!cd.data) {
+	/* try built-in microcode if no initrd */
+	if (!size) {
 		if (!load_builtin_intel_microcode(&cd))
 			return UCODE_ERROR;
+	} else {
+		cd = find_cpio_data(p, (void *)start, size, &offset);
+		if (!cd.data)
+			return UCODE_ERROR;
 	}
 
-	return get_matching_model_microcode(0, start, cd.data, cd.size,
-					    mc_saved_data, initrd, uci);
+	return get_matching_model_microcode(start, cd.data, cd.size,
+					    mcs, mc_ptrs, uci);
 }
 
 /*
@@ -571,14 +569,11 @@ scan_microcode(struct mc_saved_data *mc_saved_data, unsigned long *initrd,
 static void
 print_ucode_info(struct ucode_cpu_info *uci, unsigned int date)
 {
-	int cpu = smp_processor_id();
-
-	pr_info("CPU%d microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n",
-		cpu,
-		uci->cpu_sig.rev,
-		date & 0xffff,
-		date >> 24,
-		(date >> 16) & 0xff);
+	pr_info_once("microcode updated early to revision 0x%x, date = %04x-%02x-%02x\n",
+		     uci->cpu_sig.rev,
+		     date & 0xffff,
+		     date >> 24,
+		     (date >> 16) & 0xff);
 }
 
 #ifdef CONFIG_X86_32
@@ -607,19 +602,19 @@ void show_ucode_info_early(void)
  */
 static void print_ucode(struct ucode_cpu_info *uci)
 {
-	struct microcode_intel *mc_intel;
+	struct microcode_intel *mc;
 	int *delay_ucode_info_p;
 	int *current_mc_date_p;
 
-	mc_intel = uci->mc;
-	if (mc_intel == NULL)
+	mc = uci->mc;
+	if (!mc)
 		return;
 
 	delay_ucode_info_p = (int *)__pa_nodebug(&delay_ucode_info);
 	current_mc_date_p = (int *)__pa_nodebug(&current_mc_date);
 
 	*delay_ucode_info_p = 1;
-	*current_mc_date_p = mc_intel->hdr.date;
+	*current_mc_date_p = mc->hdr.date;
 }
 #else
 
@@ -634,37 +629,35 @@ static inline void flush_tlb_early(void)
 
 static inline void print_ucode(struct ucode_cpu_info *uci)
 {
-	struct microcode_intel *mc_intel;
+	struct microcode_intel *mc;
 
-	mc_intel = uci->mc;
-	if (mc_intel == NULL)
+	mc = uci->mc;
+	if (!mc)
 		return;
 
-	print_ucode_info(uci, mc_intel->hdr.date);
+	print_ucode_info(uci, mc->hdr.date);
 }
 #endif
 
 static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
 {
-	struct microcode_intel *mc_intel;
+	struct microcode_intel *mc;
 	unsigned int val[2];
 
-	mc_intel = uci->mc;
-	if (mc_intel == NULL)
+	mc = uci->mc;
+	if (!mc)
 		return 0;
 
 	/* write microcode via MSR 0x79 */
-	native_wrmsr(MSR_IA32_UCODE_WRITE,
-	      (unsigned long) mc_intel->bits,
-	      (unsigned long) mc_intel->bits >> 16 >> 16);
-	native_wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+	native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
+	native_wrmsrl(MSR_IA32_UCODE_REV, 0);
 
 	/* As documented in the SDM: Do a CPUID 1 here */
 	sync_core();
 
 	/* get the current revision from MSR 0x8B */
 	native_rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
-	if (val[1] != mc_intel->hdr.rev)
+	if (val[1] != mc->hdr.rev)
 		return -1;
 
 #ifdef CONFIG_X86_64
@@ -676,25 +669,26 @@ static int apply_microcode_early(struct ucode_cpu_info *uci, bool early)
 	if (early)
 		print_ucode(uci);
 	else
-		print_ucode_info(uci, mc_intel->hdr.date);
+		print_ucode_info(uci, mc->hdr.date);
 
 	return 0;
 }
 
 /*
  * This function converts microcode patch offsets previously stored in
- * mc_saved_in_initrd to pointers and stores the pointers in mc_saved_data.
+ * mc_tmp_ptrs to pointers and stores the pointers in mc_saved_data.
  */
 int __init save_microcode_in_initrd_intel(void)
 {
-	unsigned int count = mc_saved_data.mc_saved_count;
+	unsigned int count = mc_saved_data.num_saved;
 	struct microcode_intel *mc_saved[MAX_UCODE_COUNT];
 	int ret = 0;
 
-	if (count == 0)
+	if (!count)
 		return ret;
 
-	copy_initrd_ptrs(mc_saved, mc_saved_in_initrd, initrd_start, count);
+	copy_ptrs(mc_saved, mc_tmp_ptrs, get_initrd_start(), count);
+
 	ret = save_microcode(&mc_saved_data, mc_saved, count);
 	if (ret)
 		pr_err("Cannot save microcode patches from initrd.\n");
@@ -705,8 +699,7 @@ int __init save_microcode_in_initrd_intel(void)
 }
 
 static void __init
-_load_ucode_intel_bsp(struct mc_saved_data *mc_saved_data,
-		      unsigned long *initrd,
+_load_ucode_intel_bsp(struct mc_saved_data *mcs, unsigned long *mc_ptrs,
 		      unsigned long start, unsigned long size)
 {
 	struct ucode_cpu_info uci;
@@ -714,11 +707,11 @@ _load_ucode_intel_bsp(struct mc_saved_data *mc_saved_data,
 
 	collect_cpu_info_early(&uci);
 
-	ret = scan_microcode(mc_saved_data, initrd, start, size, &uci);
+	ret = scan_microcode(mcs, mc_ptrs, start, size, &uci);
 	if (ret != UCODE_OK)
 		return;
 
-	ret = load_microcode(mc_saved_data, initrd, start, &uci);
+	ret = load_microcode(mcs, mc_ptrs, start, &uci);
 	if (ret != UCODE_OK)
 		return;
 
@@ -732,53 +725,49 @@ void __init load_ucode_intel_bsp(void)
 	struct boot_params *p;
 
 	p	= (struct boot_params *)__pa_nodebug(&boot_params);
-	start	= p->hdr.ramdisk_image;
 	size	= p->hdr.ramdisk_size;
 
-	_load_ucode_intel_bsp(
-			(struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
-			(unsigned long *)__pa_nodebug(&mc_saved_in_initrd),
-			start, size);
+	/*
+	 * Set start only if we have an initrd image. We cannot use initrd_start
+	 * because it is not set that early yet.
+	 */
+	start	= (size ? p->hdr.ramdisk_image : 0);
+
+	_load_ucode_intel_bsp((struct mc_saved_data *)__pa_nodebug(&mc_saved_data),
+			      (unsigned long *)__pa_nodebug(&mc_tmp_ptrs),
+			      start, size);
 #else
-	start	= boot_params.hdr.ramdisk_image + PAGE_OFFSET;
 	size	= boot_params.hdr.ramdisk_size;
+	start	= (size ? boot_params.hdr.ramdisk_image + PAGE_OFFSET : 0);
 
-	_load_ucode_intel_bsp(&mc_saved_data, mc_saved_in_initrd, start, size);
+	_load_ucode_intel_bsp(&mc_saved_data, mc_tmp_ptrs, start, size);
 #endif
 }
 
 void load_ucode_intel_ap(void)
 {
-	struct mc_saved_data *mc_saved_data_p;
+	unsigned long *mcs_tmp_p;
+	struct mc_saved_data *mcs_p;
 	struct ucode_cpu_info uci;
-	unsigned long *mc_saved_in_initrd_p;
-	unsigned long initrd_start_addr;
 	enum ucode_state ret;
 #ifdef CONFIG_X86_32
-	unsigned long *initrd_start_p;
 
-	mc_saved_in_initrd_p =
-		(unsigned long *)__pa_nodebug(mc_saved_in_initrd);
-	mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
-	initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
-	initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
+	mcs_tmp_p = (unsigned long *)__pa_nodebug(mc_tmp_ptrs);
+	mcs_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
 #else
-	mc_saved_data_p = &mc_saved_data;
-	mc_saved_in_initrd_p = mc_saved_in_initrd;
-	initrd_start_addr = initrd_start;
+	mcs_tmp_p = mc_tmp_ptrs;
+	mcs_p = &mc_saved_data;
 #endif
 
 	/*
 	 * If there is no valid ucode previously saved in memory, no need to
 	 * update ucode on this AP.
 	 */
-	if (mc_saved_data_p->mc_saved_count == 0)
+	if (!mcs_p->num_saved)
 		return;
 
 	collect_cpu_info_early(&uci);
-	ret = load_microcode(mc_saved_data_p, mc_saved_in_initrd_p,
-			     initrd_start_addr, &uci);
-
+	ret = load_microcode(mcs_p, mcs_tmp_p, get_initrd_start_addr(), &uci);
 	if (ret != UCODE_OK)
 		return;
 
@@ -790,13 +779,13 @@ void reload_ucode_intel(void)
 	struct ucode_cpu_info uci;
 	enum ucode_state ret;
 
-	if (!mc_saved_data.mc_saved_count)
+	if (!mc_saved_data.num_saved)
 		return;
 
 	collect_cpu_info_early(&uci);
 
 	ret = load_microcode_early(mc_saved_data.mc_saved,
-				   mc_saved_data.mc_saved_count, &uci);
+				   mc_saved_data.num_saved, &uci);
 	if (ret != UCODE_OK)
 		return;
 
@@ -829,7 +818,7 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
  * return 0 - no update found
  * return 1 - found update
  */
-static int get_matching_mc(struct microcode_intel *mc_intel, int cpu)
+static int get_matching_mc(struct microcode_intel *mc, int cpu)
 {
 	struct cpu_signature cpu_sig;
 	unsigned int csig, cpf, crev;
@@ -840,39 +829,36 @@ static int get_matching_mc(struct microcode_intel *mc_intel, int cpu)
 	cpf = cpu_sig.pf;
 	crev = cpu_sig.rev;
 
-	return has_newer_microcode(mc_intel, csig, cpf, crev);
+	return has_newer_microcode(mc, csig, cpf, crev);
 }
 
 static int apply_microcode_intel(int cpu)
 {
-	struct microcode_intel *mc_intel;
+	struct microcode_intel *mc;
 	struct ucode_cpu_info *uci;
+	struct cpuinfo_x86 *c;
 	unsigned int val[2];
-	int cpu_num = raw_smp_processor_id();
-	struct cpuinfo_x86 *c = &cpu_data(cpu_num);
-
-	uci = ucode_cpu_info + cpu;
-	mc_intel = uci->mc;
 
 	/* We should bind the task to the CPU */
-	BUG_ON(cpu_num != cpu);
+	if (WARN_ON(raw_smp_processor_id() != cpu))
+		return -1;
 
-	if (mc_intel == NULL)
+	uci = ucode_cpu_info + cpu;
+	mc = uci->mc;
+	if (!mc)
 		return 0;
 
 	/*
 	 * Microcode on this CPU could be updated earlier. Only apply the
-	 * microcode patch in mc_intel when it is newer than the one on this
+	 * microcode patch in mc when it is newer than the one on this
 	 * CPU.
 	 */
-	if (get_matching_mc(mc_intel, cpu) == 0)
+	if (!get_matching_mc(mc, cpu))
 		return 0;
 
 	/* write microcode via MSR 0x79 */
-	wrmsr(MSR_IA32_UCODE_WRITE,
-	      (unsigned long) mc_intel->bits,
-	      (unsigned long) mc_intel->bits >> 16 >> 16);
-	wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+	wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
+	wrmsrl(MSR_IA32_UCODE_REV, 0);
 
 	/* As documented in the SDM: Do a CPUID 1 here */
 	sync_core();
@@ -880,16 +866,19 @@ static int apply_microcode_intel(int cpu)
 	/* get the current revision from MSR 0x8B */
 	rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
 
-	if (val[1] != mc_intel->hdr.rev) {
+	if (val[1] != mc->hdr.rev) {
 		pr_err("CPU%d update to revision 0x%x failed\n",
-		       cpu_num, mc_intel->hdr.rev);
+		       cpu, mc->hdr.rev);
 		return -1;
 	}
+
 	pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x\n",
-		cpu_num, val[1],
-		mc_intel->hdr.date & 0xffff,
-		mc_intel->hdr.date >> 24,
-		(mc_intel->hdr.date >> 16) & 0xff);
+		cpu, val[1],
+		mc->hdr.date & 0xffff,
+		mc->hdr.date >> 24,
+		(mc->hdr.date >> 16) & 0xff);
+
+	c = &cpu_data(cpu);
 
 	uci->cpu_sig.rev = val[1];
 	c->microcode = val[1];
diff --git a/arch/x86/kernel/cpu/microcode/intel_lib.c b/arch/x86/kernel/cpu/microcode/intel_lib.c
index b96896bcbdaf..2ce1a7dc45b7 100644
--- a/arch/x86/kernel/cpu/microcode/intel_lib.c
+++ b/arch/x86/kernel/cpu/microcode/intel_lib.c
@@ -49,7 +49,7 @@ int microcode_sanity_check(void *mc, int print_err)
 	unsigned long total_size, data_size, ext_table_size;
 	struct microcode_header_intel *mc_header = mc;
 	struct extended_sigtable *ext_header = NULL;
-	int sum, orig_sum, ext_sigcount = 0, i;
+	u32 sum, orig_sum, ext_sigcount = 0, i;
 	struct extended_signature *ext_sig;
 
 	total_size = get_totalsize(mc_header);
@@ -57,69 +57,85 @@ int microcode_sanity_check(void *mc, int print_err)
 
 	if (data_size + MC_HEADER_SIZE > total_size) {
 		if (print_err)
-			pr_err("error! Bad data size in microcode data file\n");
+			pr_err("Error: bad microcode data file size.\n");
 		return -EINVAL;
 	}
 
 	if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
 		if (print_err)
-			pr_err("error! Unknown microcode update format\n");
+			pr_err("Error: invalid/unknown microcode update format.\n");
 		return -EINVAL;
 	}
+
 	ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
 	if (ext_table_size) {
+		u32 ext_table_sum = 0;
+		u32 *ext_tablep;
+
 		if ((ext_table_size < EXT_HEADER_SIZE)
 		 || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
 			if (print_err)
-				pr_err("error! Small exttable size in microcode data file\n");
+				pr_err("Error: truncated extended signature table.\n");
 			return -EINVAL;
 		}
+
 		ext_header = mc + MC_HEADER_SIZE + data_size;
 		if (ext_table_size != exttable_size(ext_header)) {
 			if (print_err)
-				pr_err("error! Bad exttable size in microcode data file\n");
+				pr_err("Error: extended signature table size mismatch.\n");
 			return -EFAULT;
 		}
+
 		ext_sigcount = ext_header->count;
-	}
 
-	/* check extended table checksum */
-	if (ext_table_size) {
-		int ext_table_sum = 0;
-		int *ext_tablep = (int *)ext_header;
+		/*
+		 * Check extended table checksum: the sum of all dwords that
+		 * comprise a valid table must be 0.
+		 */
+		ext_tablep = (u32 *)ext_header;
 
-		i = ext_table_size / DWSIZE;
+		i = ext_table_size / sizeof(u32);
 		while (i--)
 			ext_table_sum += ext_tablep[i];
+
 		if (ext_table_sum) {
 			if (print_err)
-				pr_warn("aborting, bad extended signature table checksum\n");
+				pr_warn("Bad extended signature table checksum, aborting.\n");
 			return -EINVAL;
 		}
 	}
 
-	/* calculate the checksum */
+	/*
+	 * Calculate the checksum of update data and header. The checksum of
+	 * valid update data and header including the extended signature table
+	 * must be 0.
+	 */
 	orig_sum = 0;
-	i = (MC_HEADER_SIZE + data_size) / DWSIZE;
+	i = (MC_HEADER_SIZE + data_size) / sizeof(u32);
 	while (i--)
-		orig_sum += ((int *)mc)[i];
+		orig_sum += ((u32 *)mc)[i];
+
 	if (orig_sum) {
 		if (print_err)
-			pr_err("aborting, bad checksum\n");
+			pr_err("Bad microcode data checksum, aborting.\n");
 		return -EINVAL;
 	}
+
 	if (!ext_table_size)
 		return 0;
-	/* check extended signature checksum */
+
+	/*
+	 * Check extended signature checksum: 0 => valid.
+	 */
 	for (i = 0; i < ext_sigcount; i++) {
 		ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
 			  EXT_SIGNATURE_SIZE * i;
-		sum = orig_sum
-			- (mc_header->sig + mc_header->pf + mc_header->cksum)
-			+ (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
+
+		sum = (mc_header->sig + mc_header->pf + mc_header->cksum) -
+		      (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
 		if (sum) {
 			if (print_err)
-				pr_err("aborting, bad checksum\n");
+				pr_err("Bad extended signature checksum, aborting.\n");
 			return -EINVAL;
 		}
 	}
diff --git a/arch/x86/kernel/cpu/mkcapflags.sh b/arch/x86/kernel/cpu/mkcapflags.sh
index 3f20710a5b23..6988c74409a8 100644
--- a/arch/x86/kernel/cpu/mkcapflags.sh
+++ b/arch/x86/kernel/cpu/mkcapflags.sh
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# Generate the x86_cap/bug_flags[] arrays from include/asm/cpufeature.h
+# Generate the x86_cap/bug_flags[] arrays from include/asm/cpufeatures.h
 #
 
 IN=$1
@@ -49,8 +49,8 @@ dump_array()
 trap 'rm "$OUT"' EXIT
 
 (
-	echo "#ifndef _ASM_X86_CPUFEATURE_H"
-	echo "#include <asm/cpufeature.h>"
+	echo "#ifndef _ASM_X86_CPUFEATURES_H"
+	echo "#include <asm/cpufeatures.h>"
 	echo "#endif"
 	echo ""
 
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 20e242ea1bc4..4e7c6933691c 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -161,8 +161,8 @@ static void __init ms_hyperv_init_platform(void)
 	ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
 	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
 
-	printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
-	       ms_hyperv.features, ms_hyperv.hints);
+	pr_info("HyperV: features 0x%x, hints 0x%x\n",
+		ms_hyperv.features, ms_hyperv.hints);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (ms_hyperv.features & HV_X64_MSR_APIC_FREQUENCY_AVAILABLE) {
@@ -174,8 +174,8 @@ static void __init ms_hyperv_init_platform(void)
 		rdmsrl(HV_X64_MSR_APIC_FREQUENCY, hv_lapic_frequency);
 		hv_lapic_frequency = div_u64(hv_lapic_frequency, HZ);
 		lapic_timer_frequency = hv_lapic_frequency;
-		printk(KERN_INFO "HyperV: LAPIC Timer Frequency: %#x\n",
-				lapic_timer_frequency);
+		pr_info("HyperV: LAPIC Timer Frequency: %#x\n",
+			lapic_timer_frequency);
 	}
 #endif
 
diff --git a/arch/x86/kernel/cpu/mtrr/centaur.c b/arch/x86/kernel/cpu/mtrr/centaur.c
index 316fe3e60a97..3d689937fc1b 100644
--- a/arch/x86/kernel/cpu/mtrr/centaur.c
+++ b/arch/x86/kernel/cpu/mtrr/centaur.c
@@ -103,7 +103,7 @@ centaur_validate_add_page(unsigned long base, unsigned long size, unsigned int t
 	 */
 	if (type != MTRR_TYPE_WRCOMB &&
 	    (centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) {
-		pr_warning("mtrr: only write-combining%s supported\n",
+		pr_warn("mtrr: only write-combining%s supported\n",
 			   centaur_mcr_type ? " and uncacheable are" : " is");
 		return -EINVAL;
 	}
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 70d7c93f4550..31e951ce6dff 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -57,9 +57,9 @@ static int __initdata				nr_range;
 static struct var_mtrr_range_state __initdata	range_state[RANGE_NUM];
 
 static int __initdata debug_print;
-#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
+#define Dprintk(x...) do { if (debug_print) pr_debug(x); } while (0)
 
-#define BIOS_BUG_MSG KERN_WARNING \
+#define BIOS_BUG_MSG \
 	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
 static int __init
@@ -81,9 +81,9 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range,
 						base, base + size);
 	}
 	if (debug_print) {
-		printk(KERN_DEBUG "After WB checking\n");
+		pr_debug("After WB checking\n");
 		for (i = 0; i < nr_range; i++)
-			printk(KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n",
+			pr_debug("MTRR MAP PFN: %016llx - %016llx\n",
 				 range[i].start, range[i].end);
 	}
 
@@ -101,7 +101,7 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range,
 		    (mtrr_state.enabled & MTRR_STATE_MTRR_ENABLED) &&
 		    (mtrr_state.enabled & MTRR_STATE_MTRR_FIXED_ENABLED)) {
 			/* Var MTRR contains UC entry below 1M? Skip it: */
-			printk(BIOS_BUG_MSG, i);
+			pr_warn(BIOS_BUG_MSG, i);
 			if (base + size <= (1<<(20-PAGE_SHIFT)))
 				continue;
 			size -= (1<<(20-PAGE_SHIFT)) - base;
@@ -114,11 +114,11 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range,
 				 extra_remove_base + extra_remove_size);
 
 	if  (debug_print) {
-		printk(KERN_DEBUG "After UC checking\n");
+		pr_debug("After UC checking\n");
 		for (i = 0; i < RANGE_NUM; i++) {
 			if (!range[i].end)
 				continue;
-			printk(KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n",
+			pr_debug("MTRR MAP PFN: %016llx - %016llx\n",
 				 range[i].start, range[i].end);
 		}
 	}
@@ -126,9 +126,9 @@ x86_get_mtrr_mem_range(struct range *range, int nr_range,
 	/* sort the ranges */
 	nr_range = clean_sort_range(range, RANGE_NUM);
 	if  (debug_print) {
-		printk(KERN_DEBUG "After sorting\n");
+		pr_debug("After sorting\n");
 		for (i = 0; i < nr_range; i++)
-			printk(KERN_DEBUG "MTRR MAP PFN: %016llx - %016llx\n",
+			pr_debug("MTRR MAP PFN: %016llx - %016llx\n",
 				 range[i].start, range[i].end);
 	}
 
@@ -544,7 +544,7 @@ static void __init print_out_mtrr_range_state(void)
 		start_base = to_size_factor(start_base, &start_factor),
 		type = range_state[i].type;
 
-		printk(KERN_DEBUG "reg %d, base: %ld%cB, range: %ld%cB, type %s\n",
+		pr_debug("reg %d, base: %ld%cB, range: %ld%cB, type %s\n",
 			i, start_base, start_factor,
 			size_base, size_factor,
 			(type == MTRR_TYPE_UNCACHABLE) ? "UC" :
@@ -593,9 +593,16 @@ mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
 		      unsigned long x_remove_base,
 		      unsigned long x_remove_size, int i)
 {
-	static struct range range_new[RANGE_NUM];
+	/*
+	 * range_new should really be an automatic variable, but
+	 * putting 4096 bytes on the stack is frowned upon, to put it
+	 * mildly. It is safe to make it a static __initdata variable,
+	 * since mtrr_calc_range_state is only called during init and
+	 * there's no way it will call itself recursively.
+	 */
+	static struct range range_new[RANGE_NUM] __initdata;
 	unsigned long range_sums_new;
-	static int nr_range_new;
+	int nr_range_new;
 	int num_reg;
 
 	/* Convert ranges to var ranges state: */
@@ -706,7 +713,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 		return 0;
 
 	/* Print original var MTRRs at first, for debugging: */
-	printk(KERN_DEBUG "original variable MTRRs\n");
+	pr_debug("original variable MTRRs\n");
 	print_out_mtrr_range_state();
 
 	memset(range, 0, sizeof(range));
@@ -726,7 +733,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 					  x_remove_base, x_remove_size);
 
 	range_sums = sum_ranges(range, nr_range);
-	printk(KERN_INFO "total RAM covered: %ldM\n",
+	pr_info("total RAM covered: %ldM\n",
 	       range_sums >> (20 - PAGE_SHIFT));
 
 	if (mtrr_chunk_size && mtrr_gran_size) {
@@ -738,12 +745,11 @@ int __init mtrr_cleanup(unsigned address_bits)
 
 		if (!result[i].bad) {
 			set_var_mtrr_all(address_bits);
-			printk(KERN_DEBUG "New variable MTRRs\n");
+			pr_debug("New variable MTRRs\n");
 			print_out_mtrr_range_state();
 			return 1;
 		}
-		printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, "
-		       "will find optimal one\n");
+		pr_info("invalid mtrr_gran_size or mtrr_chunk_size, will find optimal one\n");
 	}
 
 	i = 0;
@@ -761,7 +767,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 				      x_remove_base, x_remove_size, i);
 			if (debug_print) {
 				mtrr_print_out_one_result(i);
-				printk(KERN_INFO "\n");
+				pr_info("\n");
 			}
 
 			i++;
@@ -772,7 +778,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 	index_good = mtrr_search_optimal_index();
 
 	if (index_good != -1) {
-		printk(KERN_INFO "Found optimal setting for mtrr clean up\n");
+		pr_info("Found optimal setting for mtrr clean up\n");
 		i = index_good;
 		mtrr_print_out_one_result(i);
 
@@ -783,7 +789,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 		gran_size <<= 10;
 		x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
 		set_var_mtrr_all(address_bits);
-		printk(KERN_DEBUG "New variable MTRRs\n");
+		pr_debug("New variable MTRRs\n");
 		print_out_mtrr_range_state();
 		return 1;
 	} else {
@@ -792,8 +798,8 @@ int __init mtrr_cleanup(unsigned address_bits)
 			mtrr_print_out_one_result(i);
 	}
 
-	printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n");
-	printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n");
+	pr_info("mtrr_cleanup: can not find optimal value\n");
+	pr_info("please specify mtrr_gran_size/mtrr_chunk_size\n");
 
 	return 0;
 }
@@ -911,7 +917,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* kvm/qemu doesn't have mtrr set right, don't trim them all: */
 	if (!highest_pfn) {
-		printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n");
+		pr_info("CPU MTRRs all blank - virtualized system.\n");
 		return 0;
 	}
 
@@ -966,7 +972,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 							 end_pfn);
 
 	if (total_trim_size) {
-		pr_warning("WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing %lluMB of RAM.\n", total_trim_size >> 20);
+		pr_warn("WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing %lluMB of RAM.\n",
+			total_trim_size >> 20);
 
 		if (!changed_by_mtrr_cleanup)
 			WARN_ON(1);
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 3b533cf37c74..19f57360dfd2 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -42,7 +42,7 @@ EXPORT_SYMBOL_GPL(mtrr_state);
  * "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
  * Opteron Processors" (26094 Rev. 3.30 February 2006), section
  * "13.2.1.2 SYSCFG Register": "The MtrrFixDramModEn bit should be set
- * to 1 during BIOS initalization of the fixed MTRRs, then cleared to
+ * to 1 during BIOS initialization of the fixed MTRRs, then cleared to
  * 0 for operation."
  */
 static inline void k8_check_syscfg_dram_mod_en(void)
@@ -55,7 +55,7 @@ static inline void k8_check_syscfg_dram_mod_en(void)
 
 	rdmsr(MSR_K8_SYSCFG, lo, hi);
 	if (lo & K8_MTRRFIXRANGE_DRAM_MODIFY) {
-		printk(KERN_ERR FW_WARN "MTRR: CPU %u: SYSCFG[MtrrFixDramModEn]"
+		pr_err(FW_WARN "MTRR: CPU %u: SYSCFG[MtrrFixDramModEn]"
 		       " not cleared by BIOS, clearing this bit\n",
 		       smp_processor_id());
 		lo &= ~K8_MTRRFIXRANGE_DRAM_MODIFY;
@@ -349,7 +349,7 @@ static void get_fixed_ranges(mtrr_type *frs)
 
 void mtrr_save_fixed_ranges(void *info)
 {
-	if (cpu_has_mtrr)
+	if (boot_cpu_has(X86_FEATURE_MTRR))
 		get_fixed_ranges(mtrr_state.fixed_ranges);
 }
 
@@ -501,14 +501,14 @@ void __init mtrr_state_warn(void)
 	if (!mask)
 		return;
 	if (mask & MTRR_CHANGE_MASK_FIXED)
-		pr_warning("mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+		pr_warn("mtrr: your CPUs had inconsistent fixed MTRR settings\n");
 	if (mask & MTRR_CHANGE_MASK_VARIABLE)
-		pr_warning("mtrr: your CPUs had inconsistent variable MTRR settings\n");
+		pr_warn("mtrr: your CPUs had inconsistent variable MTRR settings\n");
 	if (mask & MTRR_CHANGE_MASK_DEFTYPE)
-		pr_warning("mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+		pr_warn("mtrr: your CPUs had inconsistent MTRRdefType settings\n");
 
-	printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n");
-	printk(KERN_INFO "mtrr: corrected configuration.\n");
+	pr_info("mtrr: probably your BIOS does not setup all CPUs.\n");
+	pr_info("mtrr: corrected configuration.\n");
 }
 
 /*
@@ -519,8 +519,7 @@ void __init mtrr_state_warn(void)
 void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b)
 {
 	if (wrmsr_safe(msr, a, b) < 0) {
-		printk(KERN_ERR
-			"MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
+		pr_err("MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
 			smp_processor_id(), msr, a, b);
 	}
 }
@@ -607,7 +606,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 		tmp |= ~((1ULL<<(hi - 1)) - 1);
 
 		if (tmp != mask) {
-			printk(KERN_WARNING "mtrr: your BIOS has configured an incorrect mask, fixing it.\n");
+			pr_warn("mtrr: your BIOS has configured an incorrect mask, fixing it.\n");
 			add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
 			mask = tmp;
 		}
@@ -858,13 +857,13 @@ int generic_validate_add_page(unsigned long base, unsigned long size,
 	    boot_cpu_data.x86_model == 1 &&
 	    boot_cpu_data.x86_mask <= 7) {
 		if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
-			pr_warning("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
+			pr_warn("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
 			return -EINVAL;
 		}
 		if (!(base + size < 0x70000 || base > 0x7003F) &&
 		    (type == MTRR_TYPE_WRCOMB
 		     || type == MTRR_TYPE_WRBACK)) {
-			pr_warning("mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
+			pr_warn("mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
 			return -EINVAL;
 		}
 	}
@@ -878,7 +877,7 @@ int generic_validate_add_page(unsigned long base, unsigned long size,
 	     lbase = lbase >> 1, last = last >> 1)
 		;
 	if (lbase != last) {
-		pr_warning("mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", base, size);
+		pr_warn("mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", base, size);
 		return -EINVAL;
 	}
 	return 0;
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index f891b4750f04..10f8d4796240 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -47,7 +47,7 @@
 #include <linux/smp.h>
 #include <linux/syscore_ops.h>
 
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <asm/e820.h>
 #include <asm/mtrr.h>
 #include <asm/msr.h>
@@ -300,24 +300,24 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 		return error;
 
 	if (type >= MTRR_NUM_TYPES) {
-		pr_warning("mtrr: type: %u invalid\n", type);
+		pr_warn("mtrr: type: %u invalid\n", type);
 		return -EINVAL;
 	}
 
 	/* If the type is WC, check that this processor supports it */
 	if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
-		pr_warning("mtrr: your processor doesn't support write-combining\n");
+		pr_warn("mtrr: your processor doesn't support write-combining\n");
 		return -ENOSYS;
 	}
 
 	if (!size) {
-		pr_warning("mtrr: zero sized request\n");
+		pr_warn("mtrr: zero sized request\n");
 		return -EINVAL;
 	}
 
 	if ((base | (base + size - 1)) >>
 	    (boot_cpu_data.x86_phys_bits - PAGE_SHIFT)) {
-		pr_warning("mtrr: base or size exceeds the MTRR width\n");
+		pr_warn("mtrr: base or size exceeds the MTRR width\n");
 		return -EINVAL;
 	}
 
@@ -348,7 +348,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 				} else if (types_compatible(type, ltype))
 					continue;
 			}
-			pr_warning("mtrr: 0x%lx000,0x%lx000 overlaps existing"
+			pr_warn("mtrr: 0x%lx000,0x%lx000 overlaps existing"
 				" 0x%lx000,0x%lx000\n", base, size, lbase,
 				lsize);
 			goto out;
@@ -357,7 +357,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 		if (ltype != type) {
 			if (types_compatible(type, ltype))
 				continue;
-			pr_warning("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+			pr_warn("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
 				base, size, mtrr_attrib_to_str(ltype),
 				mtrr_attrib_to_str(type));
 			goto out;
@@ -395,7 +395,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 static int mtrr_check(unsigned long base, unsigned long size)
 {
 	if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
-		pr_warning("mtrr: size and base must be multiples of 4 kiB\n");
+		pr_warn("mtrr: size and base must be multiples of 4 kiB\n");
 		pr_debug("mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
 		dump_stack();
 		return -1;
@@ -493,16 +493,16 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 		}
 	}
 	if (reg >= max) {
-		pr_warning("mtrr: register: %d too big\n", reg);
+		pr_warn("mtrr: register: %d too big\n", reg);
 		goto out;
 	}
 	mtrr_if->get(reg, &lbase, &lsize, &ltype);
 	if (lsize < 1) {
-		pr_warning("mtrr: MTRR %d not used\n", reg);
+		pr_warn("mtrr: MTRR %d not used\n", reg);
 		goto out;
 	}
 	if (mtrr_usage_table[reg] < 1) {
-		pr_warning("mtrr: reg: %d has count=0\n", reg);
+		pr_warn("mtrr: reg: %d has count=0\n", reg);
 		goto out;
 	}
 	if (--mtrr_usage_table[reg] < 1)
@@ -682,7 +682,7 @@ void __init mtrr_bp_init(void)
 
 	phys_addr = 32;
 
-	if (cpu_has_mtrr) {
+	if (boot_cpu_has(X86_FEATURE_MTRR)) {
 		mtrr_if = &generic_mtrr_ops;
 		size_or_mask = SIZE_OR_MASK_BITS(36);
 		size_and_mask = 0x00f00000;
diff --git a/arch/x86/kernel/cpu/powerflags.c b/arch/x86/kernel/cpu/powerflags.c
index 31f0f335ed22..1dd8294fd730 100644
--- a/arch/x86/kernel/cpu/powerflags.c
+++ b/arch/x86/kernel/cpu/powerflags.c
@@ -18,4 +18,6 @@ const char *const x86_power_flags[32] = {
 	"",	/* tsc invariant mapped to constant_tsc */
 	"cpb",  /* core performance boost */
 	"eff_freq_ro", /* Readonly aperf/mperf */
+	"proc_feedback", /* processor feedback interface */
+	"acc_power", /* accumulated power mechanism */
 };
diff --git a/arch/x86/kernel/cpu/rdrand.c b/arch/x86/kernel/cpu/rdrand.c
index 136ac74dee82..f6f50c4ceaec 100644
--- a/arch/x86/kernel/cpu/rdrand.c
+++ b/arch/x86/kernel/cpu/rdrand.c
@@ -33,28 +33,27 @@ static int __init x86_rdrand_setup(char *s)
 __setup("nordrand", x86_rdrand_setup);
 
 /*
- * Force a reseed cycle; we are architecturally guaranteed a reseed
- * after no more than 512 128-bit chunks of random data.  This also
- * acts as a test of the CPU capability.
+ * RDRAND has Built-In-Self-Test (BIST) that runs on every invocation.
+ * Run the instruction a few times as a sanity check.
+ * If it fails, it is simple to disable RDRAND here.
  */
-#define RESEED_LOOP ((512*128)/sizeof(unsigned long))
+#define SANITY_CHECK_LOOPS 8
 
 void x86_init_rdrand(struct cpuinfo_x86 *c)
 {
 #ifdef CONFIG_ARCH_RANDOM
 	unsigned long tmp;
-	int i, count, ok;
+	int i;
 
 	if (!cpu_has(c, X86_FEATURE_RDRAND))
-		return;		/* Nothing to do */
+		return;
 
-	for (count = i = 0; i < RESEED_LOOP; i++) {
-		ok = rdrand_long(&tmp);
-		if (ok)
-			count++;
+	for (i = 0; i < SANITY_CHECK_LOOPS; i++) {
+		if (!rdrand_long(&tmp)) {
+			clear_cpu_cap(c, X86_FEATURE_RDRAND);
+			pr_warn_once("rdrand: disabled\n");
+			return;
+		}
 	}
-
-	if (count != RESEED_LOOP)
-		clear_cpu_cap(c, X86_FEATURE_RDRAND);
 #endif
 }
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index 608fb26c7254..8cb57df9398d 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -31,32 +31,12 @@ void init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	const struct cpuid_bit *cb;
 
 	static const struct cpuid_bit cpuid_bits[] = {
-		{ X86_FEATURE_DTHERM,		CR_EAX, 0, 0x00000006, 0 },
-		{ X86_FEATURE_IDA,		CR_EAX, 1, 0x00000006, 0 },
-		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
-		{ X86_FEATURE_PLN,		CR_EAX, 4, 0x00000006, 0 },
-		{ X86_FEATURE_PTS,		CR_EAX, 6, 0x00000006, 0 },
-		{ X86_FEATURE_HWP,		CR_EAX, 7, 0x00000006, 0 },
-		{ X86_FEATURE_HWP_NOTIFY,	CR_EAX, 8, 0x00000006, 0 },
-		{ X86_FEATURE_HWP_ACT_WINDOW,	CR_EAX, 9, 0x00000006, 0 },
-		{ X86_FEATURE_HWP_EPP,		CR_EAX,10, 0x00000006, 0 },
-		{ X86_FEATURE_HWP_PKG_REQ,	CR_EAX,11, 0x00000006, 0 },
 		{ X86_FEATURE_INTEL_PT,		CR_EBX,25, 0x00000007, 0 },
 		{ X86_FEATURE_APERFMPERF,	CR_ECX, 0, 0x00000006, 0 },
 		{ X86_FEATURE_EPB,		CR_ECX, 3, 0x00000006, 0 },
 		{ X86_FEATURE_HW_PSTATE,	CR_EDX, 7, 0x80000007, 0 },
 		{ X86_FEATURE_CPB,		CR_EDX, 9, 0x80000007, 0 },
 		{ X86_FEATURE_PROC_FEEDBACK,	CR_EDX,11, 0x80000007, 0 },
-		{ X86_FEATURE_NPT,		CR_EDX, 0, 0x8000000a, 0 },
-		{ X86_FEATURE_LBRV,		CR_EDX, 1, 0x8000000a, 0 },
-		{ X86_FEATURE_SVML,		CR_EDX, 2, 0x8000000a, 0 },
-		{ X86_FEATURE_NRIPS,		CR_EDX, 3, 0x8000000a, 0 },
-		{ X86_FEATURE_TSCRATEMSR,	CR_EDX, 4, 0x8000000a, 0 },
-		{ X86_FEATURE_VMCBCLEAN,	CR_EDX, 5, 0x8000000a, 0 },
-		{ X86_FEATURE_FLUSHBYASID,	CR_EDX, 6, 0x8000000a, 0 },
-		{ X86_FEATURE_DECODEASSISTS,	CR_EDX, 7, 0x8000000a, 0 },
-		{ X86_FEATURE_PAUSEFILTER,	CR_EDX,10, 0x8000000a, 0 },
-		{ X86_FEATURE_PFTHRESHOLD,	CR_EDX,12, 0x8000000a, 0 },
 		{ 0, 0, 0, 0, 0 }
 	};
 
diff --git a/arch/x86/kernel/cpu/topology.c b/arch/x86/kernel/cpu/topology.c
index 4c60eaf0571c..cd531355e838 100644
--- a/arch/x86/kernel/cpu/topology.c
+++ b/arch/x86/kernel/cpu/topology.c
@@ -87,10 +87,10 @@ void detect_extended_topology(struct cpuinfo_x86 *c)
 	c->x86_max_cores = (core_level_siblings / smp_num_siblings);
 
 	if (!printed) {
-		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
+		pr_info("CPU: Physical Processor ID: %d\n",
 		       c->phys_proc_id);
 		if (c->x86_max_cores > 1)
-			printk(KERN_INFO  "CPU: Processor Core ID: %d\n",
+			pr_info("CPU: Processor Core ID: %d\n",
 			       c->cpu_core_id);
 		printed = 1;
 	}
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index 3fa0e5ad86b4..34178564be2a 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -1,6 +1,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <asm/msr.h>
 #include "cpu.h"
 
@@ -12,7 +12,7 @@ static void early_init_transmeta(struct cpuinfo_x86 *c)
 	xlvl = cpuid_eax(0x80860000);
 	if ((xlvl & 0xffff0000) == 0x80860000) {
 		if (xlvl >= 0x80860001)
-			c->x86_capability[2] = cpuid_edx(0x80860001);
+			c->x86_capability[CPUID_8086_0001_EDX] = cpuid_edx(0x80860001);
 	}
 }
 
@@ -33,7 +33,7 @@ static void init_transmeta(struct cpuinfo_x86 *c)
 	if (max >= 0x80860001) {
 		cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags);
 		if (cpu_rev != 0x02000000) {
-			printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
+			pr_info("CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
 				(cpu_rev >> 24) & 0xff,
 				(cpu_rev >> 16) & 0xff,
 				(cpu_rev >> 8) & 0xff,
@@ -44,10 +44,10 @@ static void init_transmeta(struct cpuinfo_x86 *c)
 	if (max >= 0x80860002) {
 		cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy);
 		if (cpu_rev == 0x02000000) {
-			printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n",
+			pr_info("CPU: Processor revision %08X, %u MHz\n",
 				new_cpu_rev, cpu_freq);
 		}
-		printk(KERN_INFO "CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
+		pr_info("CPU: Code Morphing Software revision %u.%u.%u-%u-%u\n",
 		       (cms_rev1 >> 24) & 0xff,
 		       (cms_rev1 >> 16) & 0xff,
 		       (cms_rev1 >> 8) & 0xff,
@@ -76,13 +76,13 @@ static void init_transmeta(struct cpuinfo_x86 *c)
 		      (void *)&cpu_info[56],
 		      (void *)&cpu_info[60]);
 		cpu_info[64] = '\0';
-		printk(KERN_INFO "CPU: %s\n", cpu_info);
+		pr_info("CPU: %s\n", cpu_info);
 	}
 
 	/* Unhide possibly hidden capability flags */
 	rdmsr(0x80860004, cap_mask, uk);
 	wrmsr(0x80860004, ~0, uk);
-	c->x86_capability[0] = cpuid_edx(0x00000001);
+	c->x86_capability[CPUID_1_EDX] = cpuid_edx(0x00000001);
 	wrmsr(0x80860004, cap_mask, uk);
 
 	/* All Transmeta CPUs have a constant TSC */
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 628a059a9a06..364e58346897 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -62,7 +62,7 @@ static unsigned long vmware_get_tsc_khz(void)
 	tsc_hz = eax | (((uint64_t)ebx) << 32);
 	do_div(tsc_hz, 1000);
 	BUG_ON(tsc_hz >> 32);
-	printk(KERN_INFO "TSC freq read from hypervisor : %lu.%03lu MHz\n",
+	pr_info("TSC freq read from hypervisor : %lu.%03lu MHz\n",
 			 (unsigned long) tsc_hz / 1000,
 			 (unsigned long) tsc_hz % 1000);
 
@@ -84,8 +84,7 @@ static void __init vmware_platform_setup(void)
 	if (ebx != UINT_MAX)
 		x86_platform.calibrate_tsc = vmware_get_tsc_khz;
 	else
-		printk(KERN_WARNING
-		       "Failed to get TSC freq from the hypervisor\n");
+		pr_warn("Failed to get TSC freq from the hypervisor\n");
 }
 
 /*
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index bd3507da39f0..2836de390f95 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -58,28 +58,6 @@ static void cpuid_smp_cpuid(void *cmd_block)
 		    &cmd->eax, &cmd->ebx, &cmd->ecx, &cmd->edx);
 }
 
-static loff_t cpuid_seek(struct file *file, loff_t offset, int orig)
-{
-	loff_t ret;
-	struct inode *inode = file->f_mapping->host;
-
-	mutex_lock(&inode->i_mutex);
-	switch (orig) {
-	case 0:
-		file->f_pos = offset;
-		ret = file->f_pos;
-		break;
-	case 1:
-		file->f_pos += offset;
-		ret = file->f_pos;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	mutex_unlock(&inode->i_mutex);
-	return ret;
-}
-
 static ssize_t cpuid_read(struct file *file, char __user *buf,
 			  size_t count, loff_t *ppos)
 {
@@ -132,7 +110,7 @@ static int cpuid_open(struct inode *inode, struct file *file)
  */
 static const struct file_operations cpuid_fops = {
 	.owner = THIS_MODULE,
-	.llseek = cpuid_seek,
+	.llseek = no_seek_end_llseek,
 	.read = cpuid_read,
 	.open = cpuid_open,
 };
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 2c1910f6717e..9ef978d69c22 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -35,6 +35,7 @@
 #include <asm/cpu.h>
 #include <asm/reboot.h>
 #include <asm/virtext.h>
+#include <asm/intel_pt.h>
 
 /* Alignment required for elf header segment */
 #define ELF_CORE_HEADER_ALIGN   4096
@@ -56,10 +57,9 @@ struct crash_elf_data {
 	struct kimage *image;
 	/*
 	 * Total number of ram ranges we have after various adjustments for
-	 * GART, crash reserved region etc.
+	 * crash reserved region, etc.
 	 */
 	unsigned int max_nr_ranges;
-	unsigned long gart_start, gart_end;
 
 	/* Pointer to elf header */
 	void *ehdr;
@@ -125,6 +125,11 @@ static void kdump_nmi_callback(int cpu, struct pt_regs *regs)
 	cpu_emergency_vmxoff();
 	cpu_emergency_svm_disable();
 
+	/*
+	 * Disable Intel PT to stop its logging
+	 */
+	cpu_emergency_stop_pt();
+
 	disable_local_APIC();
 }
 
@@ -169,6 +174,11 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
 	cpu_emergency_vmxoff();
 	cpu_emergency_svm_disable();
 
+	/*
+	 * Disable Intel PT to stop its logging
+	 */
+	cpu_emergency_stop_pt();
+
 #ifdef CONFIG_X86_IO_APIC
 	/* Prevent crash_kexec() from deadlocking on ioapic_lock. */
 	ioapic_zap_locks();
@@ -190,17 +200,6 @@ static int get_nr_ram_ranges_callback(u64 start, u64 end, void *arg)
 	return 0;
 }
 
-static int get_gart_ranges_callback(u64 start, u64 end, void *arg)
-{
-	struct crash_elf_data *ced = arg;
-
-	ced->gart_start = start;
-	ced->gart_end = end;
-
-	/* Not expecting more than 1 gart aperture */
-	return 1;
-}
-
 
 /* Gather all the required information to prepare elf headers for ram regions */
 static void fill_up_crash_elf_data(struct crash_elf_data *ced,
@@ -215,22 +214,6 @@ static void fill_up_crash_elf_data(struct crash_elf_data *ced,
 
 	ced->max_nr_ranges = nr_ranges;
 
-	/*
-	 * We don't create ELF headers for GART aperture as an attempt
-	 * to dump this memory in second kernel leads to hang/crash.
-	 * If gart aperture is present, one needs to exclude that region
-	 * and that could lead to need of extra phdr.
-	 */
-	walk_iomem_res("GART", IORESOURCE_MEM, 0, -1,
-				ced, get_gart_ranges_callback);
-
-	/*
-	 * If we have gart region, excluding that could potentially split
-	 * a memory range, resulting in extra header. Account for  that.
-	 */
-	if (ced->gart_end)
-		ced->max_nr_ranges++;
-
 	/* Exclusion of crash region could split memory ranges */
 	ced->max_nr_ranges++;
 
@@ -339,13 +322,6 @@ static int elf_header_exclude_ranges(struct crash_elf_data *ced,
 			return ret;
 	}
 
-	/* Exclude GART region */
-	if (ced->gart_end) {
-		ret = exclude_mem_range(cmem, ced->gart_start, ced->gart_end);
-		if (ret)
-			return ret;
-	}
-
 	return ret;
 }
 
@@ -588,12 +564,12 @@ int crash_setup_memmap_entries(struct kimage *image, struct boot_params *params)
 	/* Add ACPI tables */
 	cmd.type = E820_ACPI;
 	flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-	walk_iomem_res("ACPI Tables", flags, 0, -1, &cmd,
+	walk_iomem_res_desc(IORES_DESC_ACPI_TABLES, flags, 0, -1, &cmd,
 		       memmap_entry_callback);
 
 	/* Add ACPI Non-volatile Storage */
 	cmd.type = E820_NVS;
-	walk_iomem_res("ACPI Non-volatile Storage", flags, 0, -1, &cmd,
+	walk_iomem_res_desc(IORES_DESC_ACPI_NV_STORAGE, flags, 0, -1, &cmd,
 			memmap_entry_callback);
 
 	/* Add crashk_low_res region */
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 9c30acfadae2..8efa57a5f29e 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -135,7 +135,8 @@ print_context_stack_bp(struct thread_info *tinfo,
 		if (!__kernel_text_address(addr))
 			break;
 
-		ops->address(data, addr, 1);
+		if (ops->address(data, addr, 1))
+			break;
 		frame = frame->next_frame;
 		ret_addr = &frame->return_address;
 		print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
@@ -154,10 +155,11 @@ static int print_trace_stack(void *data, char *name)
 /*
  * Print one address/symbol entries per line.
  */
-static void print_trace_address(void *data, unsigned long addr, int reliable)
+static int print_trace_address(void *data, unsigned long addr, int reliable)
 {
 	touch_nmi_watchdog();
 	printk_stack_address(addr, reliable, data);
+	return 0;
 }
 
 static const struct stacktrace_ops print_trace_ops = {
@@ -265,9 +267,8 @@ int __die(const char *str, struct pt_regs *regs, long err)
 #ifdef CONFIG_SMP
 	printk("SMP ");
 #endif
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk("DEBUG_PAGEALLOC ");
-#endif
+	if (debug_pagealloc_enabled())
+		printk("DEBUG_PAGEALLOC ");
 #ifdef CONFIG_KASAN
 	printk("KASAN");
 #endif
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 569c1e4f96fe..621b501f8935 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -24,6 +24,7 @@
 #include <asm/e820.h>
 #include <asm/proto.h>
 #include <asm/setup.h>
+#include <asm/cpufeature.h>
 
 /*
  * The e820 map is the map that gets modified e.g. with command line parameters
@@ -925,6 +926,41 @@ static const char *e820_type_to_string(int e820_type)
 	}
 }
 
+static unsigned long e820_type_to_iomem_type(int e820_type)
+{
+	switch (e820_type) {
+	case E820_RESERVED_KERN:
+	case E820_RAM:
+		return IORESOURCE_SYSTEM_RAM;
+	case E820_ACPI:
+	case E820_NVS:
+	case E820_UNUSABLE:
+	case E820_PRAM:
+	case E820_PMEM:
+	default:
+		return IORESOURCE_MEM;
+	}
+}
+
+static unsigned long e820_type_to_iores_desc(int e820_type)
+{
+	switch (e820_type) {
+	case E820_ACPI:
+		return IORES_DESC_ACPI_TABLES;
+	case E820_NVS:
+		return IORES_DESC_ACPI_NV_STORAGE;
+	case E820_PMEM:
+		return IORES_DESC_PERSISTENT_MEMORY;
+	case E820_PRAM:
+		return IORES_DESC_PERSISTENT_MEMORY_LEGACY;
+	case E820_RESERVED_KERN:
+	case E820_RAM:
+	case E820_UNUSABLE:
+	default:
+		return IORES_DESC_NONE;
+	}
+}
+
 static bool do_mark_busy(u32 type, struct resource *res)
 {
 	/* this is the legacy bios/dos rom-shadow + mmio region */
@@ -967,7 +1003,8 @@ void __init e820_reserve_resources(void)
 		res->start = e820.map[i].addr;
 		res->end = end;
 
-		res->flags = IORESOURCE_MEM;
+		res->flags = e820_type_to_iomem_type(e820.map[i].type);
+		res->desc = e820_type_to_iores_desc(e820.map[i].type);
 
 		/*
 		 * don't register the region that could be conflicted with
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index db9a675e751b..bca14c899137 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -547,6 +547,7 @@ static const struct pci_device_id intel_stolen_ids[] __initconst = {
 	INTEL_CHV_IDS(&chv_stolen_funcs),
 	INTEL_SKL_IDS(&gen9_stolen_funcs),
 	INTEL_BXT_IDS(&gen9_stolen_funcs),
+	INTEL_KBL_IDS(&gen9_stolen_funcs),
 };
 
 static void __init intel_graphics_stolen(int num, int slot, int func)
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 21bf92490a7b..8a121991e5ba 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -287,7 +287,7 @@ static __init void early_pci_serial_init(char *s)
 	}
 
 	/*
-	 * Lastly, initalize the hardware
+	 * Lastly, initialize the hardware
 	 */
 	if (*s) {
 		if (strcmp(s, "nocfg") == 0)
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index d25097c3fc1d..8e37cc8a539a 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -114,6 +114,10 @@ void __kernel_fpu_begin(void)
 	kernel_fpu_disable();
 
 	if (fpu->fpregs_active) {
+		/*
+		 * Ignore return value -- we don't care if reg state
+		 * is clobbered.
+		 */
 		copy_fpregs_to_fpstate(fpu);
 	} else {
 		this_cpu_write(fpu_fpregs_owner_ctx, NULL);
@@ -189,8 +193,12 @@ void fpu__save(struct fpu *fpu)
 
 	preempt_disable();
 	if (fpu->fpregs_active) {
-		if (!copy_fpregs_to_fpstate(fpu))
-			fpregs_deactivate(fpu);
+		if (!copy_fpregs_to_fpstate(fpu)) {
+			if (use_eager_fpu())
+				copy_kernel_to_fpregs(&fpu->state);
+			else
+				fpregs_deactivate(fpu);
+		}
 	}
 	preempt_enable();
 }
@@ -223,14 +231,15 @@ void fpstate_init(union fpregs_state *state)
 }
 EXPORT_SYMBOL_GPL(fpstate_init);
 
-/*
- * Copy the current task's FPU state to a new task's FPU context.
- *
- * In both the 'eager' and the 'lazy' case we save hardware registers
- * directly to the destination buffer.
- */
-static void fpu_copy(struct fpu *dst_fpu, struct fpu *src_fpu)
+int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
 {
+	dst_fpu->counter = 0;
+	dst_fpu->fpregs_active = 0;
+	dst_fpu->last_cpu = -1;
+
+	if (!src_fpu->fpstate_active || !cpu_has_fpu)
+		return 0;
+
 	WARN_ON_FPU(src_fpu != &current->thread.fpu);
 
 	/*
@@ -243,10 +252,9 @@ static void fpu_copy(struct fpu *dst_fpu, struct fpu *src_fpu)
 	/*
 	 * Save current FPU registers directly into the child
 	 * FPU context, without any memory-to-memory copying.
-	 *
-	 * If the FPU context got destroyed in the process (FNSAVE
-	 * done on old CPUs) then copy it back into the source
-	 * context and mark the current task for lazy restore.
+	 * In lazy mode, if the FPU context isn't loaded into
+	 * fpregs, CR0.TS will be set and do_device_not_available
+	 * will load the FPU context.
 	 *
 	 * We have to do all this with preemption disabled,
 	 * mostly because of the FNSAVE case, because in that
@@ -259,19 +267,13 @@ static void fpu_copy(struct fpu *dst_fpu, struct fpu *src_fpu)
 	preempt_disable();
 	if (!copy_fpregs_to_fpstate(dst_fpu)) {
 		memcpy(&src_fpu->state, &dst_fpu->state, xstate_size);
-		fpregs_deactivate(src_fpu);
+
+		if (use_eager_fpu())
+			copy_kernel_to_fpregs(&src_fpu->state);
+		else
+			fpregs_deactivate(src_fpu);
 	}
 	preempt_enable();
-}
-
-int fpu__copy(struct fpu *dst_fpu, struct fpu *src_fpu)
-{
-	dst_fpu->counter = 0;
-	dst_fpu->fpregs_active = 0;
-	dst_fpu->last_cpu = -1;
-
-	if (src_fpu->fpstate_active && cpu_has_fpu)
-		fpu_copy(dst_fpu, src_fpu);
 
 	return 0;
 }
@@ -352,6 +354,69 @@ void fpu__activate_fpstate_write(struct fpu *fpu)
 }
 
 /*
+ * This function must be called before we write the current
+ * task's fpstate.
+ *
+ * This call gets the current FPU register state and moves
+ * it in to the 'fpstate'.  Preemption is disabled so that
+ * no writes to the 'fpstate' can occur from context
+ * swiches.
+ *
+ * Must be followed by a fpu__current_fpstate_write_end().
+ */
+void fpu__current_fpstate_write_begin(void)
+{
+	struct fpu *fpu = &current->thread.fpu;
+
+	/*
+	 * Ensure that the context-switching code does not write
+	 * over the fpstate while we are doing our update.
+	 */
+	preempt_disable();
+
+	/*
+	 * Move the fpregs in to the fpu's 'fpstate'.
+	 */
+	fpu__activate_fpstate_read(fpu);
+
+	/*
+	 * The caller is about to write to 'fpu'.  Ensure that no
+	 * CPU thinks that its fpregs match the fpstate.  This
+	 * ensures we will not be lazy and skip a XRSTOR in the
+	 * future.
+	 */
+	fpu->last_cpu = -1;
+}
+
+/*
+ * This function must be paired with fpu__current_fpstate_write_begin()
+ *
+ * This will ensure that the modified fpstate gets placed back in
+ * the fpregs if necessary.
+ *
+ * Note: This function may be called whether or not an _actual_
+ * write to the fpstate occurred.
+ */
+void fpu__current_fpstate_write_end(void)
+{
+	struct fpu *fpu = &current->thread.fpu;
+
+	/*
+	 * 'fpu' now has an updated copy of the state, but the
+	 * registers may still be out of date.  Update them with
+	 * an XRSTOR if they are active.
+	 */
+	if (fpregs_active())
+		copy_kernel_to_fpregs(&fpu->state);
+
+	/*
+	 * Our update is done and the fpregs/fpstate are in sync
+	 * if necessary.  Context switches can happen again.
+	 */
+	preempt_enable();
+}
+
+/*
  * 'fpu__restore()' is called to copy FPU registers from
  * the FPU fpstate to the live hw registers and to activate
  * access to the hardware registers, so that FPU instructions
@@ -409,8 +474,10 @@ static inline void copy_init_fpstate_to_fpregs(void)
 {
 	if (use_xsave())
 		copy_kernel_to_xregs(&init_fpstate.xsave, -1);
-	else
+	else if (static_cpu_has(X86_FEATURE_FXSR))
 		copy_kernel_to_fxregs(&init_fpstate.fxsave);
+	else
+		copy_kernel_to_fregs(&init_fpstate.fsave);
 }
 
 /*
@@ -423,7 +490,7 @@ void fpu__clear(struct fpu *fpu)
 {
 	WARN_ON_FPU(fpu != &current->thread.fpu); /* Almost certainly an anomaly */
 
-	if (!use_eager_fpu()) {
+	if (!use_eager_fpu() || !static_cpu_has(X86_FEATURE_FPU)) {
 		/* FPU state will be reallocated lazily at the first use. */
 		fpu__drop(fpu);
 	} else {
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index be39b5fde4b9..54c86fffbf9f 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -3,8 +3,11 @@
  */
 #include <asm/fpu/internal.h>
 #include <asm/tlbflush.h>
+#include <asm/setup.h>
+#include <asm/cmdline.h>
 
 #include <linux/sched.h>
+#include <linux/init.h>
 
 /*
  * Initialize the TS bit in CR0 according to the style of context-switches
@@ -12,7 +15,7 @@
  */
 static void fpu__init_cpu_ctx_switch(void)
 {
-	if (!cpu_has_eager_fpu)
+	if (!boot_cpu_has(X86_FEATURE_EAGER_FPU))
 		stts();
 	else
 		clts();
@@ -75,13 +78,15 @@ static void fpu__init_system_early_generic(struct cpuinfo_x86 *c)
 	cr0 &= ~(X86_CR0_TS | X86_CR0_EM);
 	write_cr0(cr0);
 
-	asm volatile("fninit ; fnstsw %0 ; fnstcw %1"
-		     : "+m" (fsw), "+m" (fcw));
+	if (!test_bit(X86_FEATURE_FPU, (unsigned long *)cpu_caps_cleared)) {
+		asm volatile("fninit ; fnstsw %0 ; fnstcw %1"
+			     : "+m" (fsw), "+m" (fcw));
 
-	if (fsw == 0 && (fcw & 0x103f) == 0x003f)
-		set_cpu_cap(c, X86_FEATURE_FPU);
-	else
-		clear_cpu_cap(c, X86_FEATURE_FPU);
+		if (fsw == 0 && (fcw & 0x103f) == 0x003f)
+			set_cpu_cap(c, X86_FEATURE_FPU);
+		else
+			clear_cpu_cap(c, X86_FEATURE_FPU);
+	}
 
 #ifndef CONFIG_MATH_EMULATION
 	if (!cpu_has_fpu) {
@@ -129,7 +134,7 @@ static void __init fpu__init_system_generic(void)
 	 * Set up the legacy init FPU context. (xstate init might overwrite this
 	 * with a more modern format, if the CPU supports it.)
 	 */
-	fpstate_init_fxstate(&init_fpstate.fxsave);
+	fpstate_init(&init_fpstate);
 
 	fpu__init_system_mxcsr();
 }
@@ -143,9 +148,18 @@ static void __init fpu__init_system_generic(void)
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
 
-/* Enforce that 'MEMBER' is the last field of 'TYPE': */
+/* Get alignment of the TYPE. */
+#define TYPE_ALIGN(TYPE) offsetof(struct { char x; TYPE test; }, test)
+
+/*
+ * Enforce that 'MEMBER' is the last field of 'TYPE'.
+ *
+ * Align the computed size with alignment of the TYPE,
+ * because that's how C aligns structs.
+ */
 #define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
-	BUILD_BUG_ON(sizeof(TYPE) != offsetofend(TYPE, MEMBER))
+	BUILD_BUG_ON(sizeof(TYPE) != ALIGN(offsetofend(TYPE, MEMBER), \
+					   TYPE_ALIGN(TYPE)))
 
 /*
  * We append the 'struct fpu' to the task_struct:
@@ -188,7 +202,7 @@ static void __init fpu__init_task_struct_size(void)
  */
 static void __init fpu__init_system_xstate_size_legacy(void)
 {
-	static int on_boot_cpu = 1;
+	static int on_boot_cpu __initdata = 1;
 
 	WARN_ON_FPU(!on_boot_cpu);
 	on_boot_cpu = 0;
@@ -248,7 +262,10 @@ static void __init fpu__init_system_xstate_size_legacy(void)
  * not only saved the restores along the way, but we also have the
  * FPU ready to be used for the original task.
  *
- * 'eager' switching is used on modern CPUs, there we switch the FPU
+ * 'lazy' is deprecated because it's almost never a performance win
+ * and it's much more complicated than 'eager'.
+ *
+ * 'eager' switching is by default on all CPUs, there we switch the FPU
  * state during every context switch, regardless of whether the task
  * has used FPU instructions in that time slice or not. This is done
  * because modern FPU context saving instructions are able to optimize
@@ -259,26 +276,52 @@ static void __init fpu__init_system_xstate_size_legacy(void)
  *   to use 'eager' restores, if we detect that a task is using the FPU
  *   frequently. See the fpu->counter logic in fpu/internal.h for that. ]
  */
-static enum { AUTO, ENABLE, DISABLE } eagerfpu = AUTO;
+static enum { ENABLE, DISABLE } eagerfpu = ENABLE;
 
-static int __init eager_fpu_setup(char *s)
+/*
+ * Find supported xfeatures based on cpu features and command-line input.
+ * This must be called after fpu__init_parse_early_param() is called and
+ * xfeatures_mask is enumerated.
+ */
+u64 __init fpu__get_supported_xfeatures_mask(void)
 {
-	if (!strcmp(s, "on"))
-		eagerfpu = ENABLE;
-	else if (!strcmp(s, "off"))
-		eagerfpu = DISABLE;
-	else if (!strcmp(s, "auto"))
-		eagerfpu = AUTO;
-	return 1;
+	/* Support all xfeatures known to us */
+	if (eagerfpu != DISABLE)
+		return XCNTXT_MASK;
+
+	/* Warning of xfeatures being disabled for no eagerfpu mode */
+	if (xfeatures_mask & XFEATURE_MASK_EAGER) {
+		pr_err("x86/fpu: eagerfpu switching disabled, disabling the following xstate features: 0x%llx.\n",
+			xfeatures_mask & XFEATURE_MASK_EAGER);
+	}
+
+	/* Return a mask that masks out all features requiring eagerfpu mode */
+	return ~XFEATURE_MASK_EAGER;
+}
+
+/*
+ * Disable features dependent on eagerfpu.
+ */
+static void __init fpu__clear_eager_fpu_features(void)
+{
+	setup_clear_cpu_cap(X86_FEATURE_MPX);
 }
-__setup("eagerfpu=", eager_fpu_setup);
 
 /*
  * Pick the FPU context switching strategy:
+ *
+ * When eagerfpu is AUTO or ENABLE, we ensure it is ENABLE if either of
+ * the following is true:
+ *
+ * (1) the cpu has xsaveopt, as it has the optimization and doing eager
+ *     FPU switching has a relatively low cost compared to a plain xsave;
+ * (2) the cpu has xsave features (e.g. MPX) that depend on eager FPU
+ *     switching. Should the kernel boot with noxsaveopt, we support MPX
+ *     with eager FPU switching at a higher cost.
  */
 static void __init fpu__init_system_ctx_switch(void)
 {
-	static bool on_boot_cpu = 1;
+	static bool on_boot_cpu __initdata = 1;
 
 	WARN_ON_FPU(!on_boot_cpu);
 	on_boot_cpu = 0;
@@ -286,19 +329,11 @@ static void __init fpu__init_system_ctx_switch(void)
 	WARN_ON_FPU(current->thread.fpu.fpstate_active);
 	current_thread_info()->status = 0;
 
-	/* Auto enable eagerfpu for xsaveopt */
-	if (cpu_has_xsaveopt && eagerfpu != DISABLE)
+	if (boot_cpu_has(X86_FEATURE_XSAVEOPT) && eagerfpu != DISABLE)
 		eagerfpu = ENABLE;
 
-	if (xfeatures_mask & XFEATURE_MASK_EAGER) {
-		if (eagerfpu == DISABLE) {
-			pr_err("x86/fpu: eagerfpu switching disabled, disabling the following xstate features: 0x%llx.\n",
-			       xfeatures_mask & XFEATURE_MASK_EAGER);
-			xfeatures_mask &= ~XFEATURE_MASK_EAGER;
-		} else {
-			eagerfpu = ENABLE;
-		}
-	}
+	if (xfeatures_mask & XFEATURE_MASK_EAGER)
+		eagerfpu = ENABLE;
 
 	if (eagerfpu == ENABLE)
 		setup_force_cpu_cap(X86_FEATURE_EAGER_FPU);
@@ -307,11 +342,42 @@ static void __init fpu__init_system_ctx_switch(void)
 }
 
 /*
+ * We parse fpu parameters early because fpu__init_system() is executed
+ * before parse_early_param().
+ */
+static void __init fpu__init_parse_early_param(void)
+{
+	if (cmdline_find_option_bool(boot_command_line, "eagerfpu=off")) {
+		eagerfpu = DISABLE;
+		fpu__clear_eager_fpu_features();
+	}
+
+	if (cmdline_find_option_bool(boot_command_line, "no387"))
+		setup_clear_cpu_cap(X86_FEATURE_FPU);
+
+	if (cmdline_find_option_bool(boot_command_line, "nofxsr")) {
+		setup_clear_cpu_cap(X86_FEATURE_FXSR);
+		setup_clear_cpu_cap(X86_FEATURE_FXSR_OPT);
+		setup_clear_cpu_cap(X86_FEATURE_XMM);
+	}
+
+	if (cmdline_find_option_bool(boot_command_line, "noxsave"))
+		fpu__xstate_clear_all_cpu_caps();
+
+	if (cmdline_find_option_bool(boot_command_line, "noxsaveopt"))
+		setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
+
+	if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
+		setup_clear_cpu_cap(X86_FEATURE_XSAVES);
+}
+
+/*
  * Called on the boot CPU once per system bootup, to set up the initial
  * FPU state that is later cloned into all processes:
  */
 void __init fpu__init_system(struct cpuinfo_x86 *c)
 {
+	fpu__init_parse_early_param();
 	fpu__init_system_early_generic(c);
 
 	/*
@@ -335,62 +401,3 @@ void __init fpu__init_system(struct cpuinfo_x86 *c)
 
 	fpu__init_system_ctx_switch();
 }
-
-/*
- * Boot parameter to turn off FPU support and fall back to math-emu:
- */
-static int __init no_387(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_FPU);
-	return 1;
-}
-__setup("no387", no_387);
-
-/*
- * Disable all xstate CPU features:
- */
-static int __init x86_noxsave_setup(char *s)
-{
-	if (strlen(s))
-		return 0;
-
-	fpu__xstate_clear_all_cpu_caps();
-
-	return 1;
-}
-__setup("noxsave", x86_noxsave_setup);
-
-/*
- * Disable the XSAVEOPT instruction specifically:
- */
-static int __init x86_noxsaveopt_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
-
-	return 1;
-}
-__setup("noxsaveopt", x86_noxsaveopt_setup);
-
-/*
- * Disable the XSAVES instruction:
- */
-static int __init x86_noxsaves_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_XSAVES);
-
-	return 1;
-}
-__setup("noxsaves", x86_noxsaves_setup);
-
-/*
- * Disable FX save/restore and SSE support:
- */
-static int __init x86_nofxsr_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_FXSR);
-	setup_clear_cpu_cap(X86_FEATURE_FXSR_OPT);
-	setup_clear_cpu_cap(X86_FEATURE_XMM);
-
-	return 1;
-}
-__setup("nofxsr", x86_nofxsr_setup);
diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c
index 0bc3490420c5..8bd1c003942a 100644
--- a/arch/x86/kernel/fpu/regset.c
+++ b/arch/x86/kernel/fpu/regset.c
@@ -8,7 +8,7 @@
 /*
  * The xstateregs_active() routine is the same as the regset_fpregs_active() routine,
  * as the "regset->n" for the xstate regset will be updated based on the feature
- * capabilites supported by the xsave.
+ * capabilities supported by the xsave.
  */
 int regset_fpregs_active(struct task_struct *target, const struct user_regset *regset)
 {
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index ef29b742cea7..31c6a60505e6 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -385,20 +385,19 @@ fpu__alloc_mathframe(unsigned long sp, int ia32_frame,
  */
 void fpu__init_prepare_fx_sw_frame(void)
 {
-	int fsave_header_size = sizeof(struct fregs_state);
 	int size = xstate_size + FP_XSTATE_MAGIC2_SIZE;
 
-	if (config_enabled(CONFIG_X86_32))
-		size += fsave_header_size;
-
 	fx_sw_reserved.magic1 = FP_XSTATE_MAGIC1;
 	fx_sw_reserved.extended_size = size;
 	fx_sw_reserved.xfeatures = xfeatures_mask;
 	fx_sw_reserved.xstate_size = xstate_size;
 
-	if (config_enabled(CONFIG_IA32_EMULATION)) {
+	if (config_enabled(CONFIG_IA32_EMULATION) ||
+	    config_enabled(CONFIG_X86_32)) {
+		int fsave_header_size = sizeof(struct fregs_state);
+
 		fx_sw_reserved_ia32 = fx_sw_reserved;
-		fx_sw_reserved_ia32.extended_size += fsave_header_size;
+		fx_sw_reserved_ia32.extended_size = size + fsave_header_size;
 	}
 }
 
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 6454f2731b56..b48ef35b28d4 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -5,6 +5,7 @@
  */
 #include <linux/compat.h>
 #include <linux/cpu.h>
+#include <linux/pkeys.h>
 
 #include <asm/fpu/api.h>
 #include <asm/fpu/internal.h>
@@ -13,6 +14,11 @@
 
 #include <asm/tlbflush.h>
 
+/*
+ * Although we spell it out in here, the Processor Trace
+ * xfeature is completely unused.  We use other mechanisms
+ * to save/restore PT state in Linux.
+ */
 static const char *xfeature_names[] =
 {
 	"x87 floating point registers"	,
@@ -23,6 +29,8 @@ static const char *xfeature_names[] =
 	"AVX-512 opmask"		,
 	"AVX-512 Hi256"			,
 	"AVX-512 ZMM_Hi256"		,
+	"Processor Trace (unused)"	,
+	"Protection Keys User registers",
 	"unknown xstate feature"	,
 };
 
@@ -51,7 +59,12 @@ void fpu__xstate_clear_all_cpu_caps(void)
 	setup_clear_cpu_cap(X86_FEATURE_AVX512PF);
 	setup_clear_cpu_cap(X86_FEATURE_AVX512ER);
 	setup_clear_cpu_cap(X86_FEATURE_AVX512CD);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512DQ);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512BW);
+	setup_clear_cpu_cap(X86_FEATURE_AVX512VL);
 	setup_clear_cpu_cap(X86_FEATURE_MPX);
+	setup_clear_cpu_cap(X86_FEATURE_XGETBV1);
+	setup_clear_cpu_cap(X86_FEATURE_PKU);
 }
 
 /*
@@ -230,7 +243,7 @@ static void __init print_xstate_feature(u64 xstate_mask)
 	const char *feature_name;
 
 	if (cpu_has_xfeatures(xstate_mask, &feature_name))
-		pr_info("x86/fpu: Supporting XSAVE feature 0x%02Lx: '%s'\n", xstate_mask, feature_name);
+		pr_info("x86/fpu: Supporting XSAVE feature 0x%03Lx: '%s'\n", xstate_mask, feature_name);
 }
 
 /*
@@ -246,6 +259,7 @@ static void __init print_xstate_features(void)
 	print_xstate_feature(XFEATURE_MASK_OPMASK);
 	print_xstate_feature(XFEATURE_MASK_ZMM_Hi256);
 	print_xstate_feature(XFEATURE_MASK_Hi16_ZMM);
+	print_xstate_feature(XFEATURE_MASK_PKRU);
 }
 
 /*
@@ -297,7 +311,7 @@ static void __init setup_xstate_comp(void)
  */
 static void __init setup_init_fpu_buf(void)
 {
-	static int on_boot_cpu = 1;
+	static int on_boot_cpu __initdata = 1;
 
 	WARN_ON_FPU(!on_boot_cpu);
 	on_boot_cpu = 0;
@@ -462,6 +476,7 @@ static void check_xstate_against_struct(int nr)
 	XCHECK_SZ(sz, nr, XFEATURE_OPMASK,    struct avx_512_opmask_state);
 	XCHECK_SZ(sz, nr, XFEATURE_ZMM_Hi256, struct avx_512_zmm_uppers_state);
 	XCHECK_SZ(sz, nr, XFEATURE_Hi16_ZMM,  struct avx_512_hi16_state);
+	XCHECK_SZ(sz, nr, XFEATURE_PKRU,      struct pkru_state);
 
 	/*
 	 * Make *SURE* to add any feature numbers in below if
@@ -469,7 +484,8 @@ static void check_xstate_against_struct(int nr)
 	 * numbers.
 	 */
 	if ((nr < XFEATURE_YMM) ||
-	    (nr >= XFEATURE_MAX)) {
+	    (nr >= XFEATURE_MAX) ||
+	    (nr == XFEATURE_PT_UNIMPLEMENTED_SO_FAR)) {
 		WARN_ONCE(1, "no structure for xstate: %d\n", nr);
 		XSTATE_WARN_ON(1);
 	}
@@ -608,7 +624,7 @@ static void fpu__init_disable_system_xstate(void)
 void __init fpu__init_system_xstate(void)
 {
 	unsigned int eax, ebx, ecx, edx;
-	static int on_boot_cpu = 1;
+	static int on_boot_cpu __initdata = 1;
 	int err;
 
 	WARN_ON_FPU(!on_boot_cpu);
@@ -632,8 +648,7 @@ void __init fpu__init_system_xstate(void)
 		BUG();
 	}
 
-	/* Support only the state known to the OS: */
-	xfeatures_mask = xfeatures_mask & XCNTXT_MASK;
+	xfeatures_mask &= fpu__get_supported_xfeatures_mask();
 
 	/* Enable xstate instructions to be able to continue with initialization: */
 	fpu__init_cpu_xstate();
@@ -668,6 +683,19 @@ void fpu__resume_cpu(void)
 }
 
 /*
+ * Given an xstate feature mask, calculate where in the xsave
+ * buffer the state is.  Callers should ensure that the buffer
+ * is valid.
+ *
+ * Note: does not work for compacted buffers.
+ */
+void *__raw_xsave_addr(struct xregs_state *xsave, int xstate_feature_mask)
+{
+	int feature_nr = fls64(xstate_feature_mask) - 1;
+
+	return (void *)xsave + xstate_comp_offsets[feature_nr];
+}
+/*
  * Given the xsave area and a state inside, this function returns the
  * address of the state.
  *
@@ -687,14 +715,12 @@ void fpu__resume_cpu(void)
  */
 void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 {
-	int feature_nr = fls64(xstate_feature) - 1;
 	/*
 	 * Do we even *have* xsave state?
 	 */
 	if (!boot_cpu_has(X86_FEATURE_XSAVE))
 		return NULL;
 
-	xsave = &current->thread.fpu.state.xsave;
 	/*
 	 * We should not ever be requesting features that we
 	 * have not enabled.  Remember that pcntxt_mask is
@@ -716,7 +742,7 @@ void *get_xsave_addr(struct xregs_state *xsave, int xstate_feature)
 	if (!(xsave->header.xfeatures & xstate_feature))
 		return NULL;
 
-	return (void *)xsave + xstate_comp_offsets[feature_nr];
+	return __raw_xsave_addr(xsave, xstate_feature);
 }
 EXPORT_SYMBOL_GPL(get_xsave_addr);
 
@@ -751,3 +777,156 @@ const void *get_xsave_field_ptr(int xsave_state)
 
 	return get_xsave_addr(&fpu->state.xsave, xsave_state);
 }
+
+
+/*
+ * Set xfeatures (aka XSTATE_BV) bit for a feature that we want
+ * to take out of its "init state".  This will ensure that an
+ * XRSTOR actually restores the state.
+ */
+static void fpu__xfeature_set_non_init(struct xregs_state *xsave,
+		int xstate_feature_mask)
+{
+	xsave->header.xfeatures |= xstate_feature_mask;
+}
+
+/*
+ * This function is safe to call whether the FPU is in use or not.
+ *
+ * Note that this only works on the current task.
+ *
+ * Inputs:
+ *	@xsave_state: state which is defined in xsave.h (e.g. XFEATURE_MASK_FP,
+ *	XFEATURE_MASK_SSE, etc...)
+ *	@xsave_state_ptr: a pointer to a copy of the state that you would
+ *	like written in to the current task's FPU xsave state.  This pointer
+ *	must not be located in the current tasks's xsave area.
+ * Output:
+ *	address of the state in the xsave area or NULL if the state
+ *	is not present or is in its 'init state'.
+ */
+static void fpu__xfeature_set_state(int xstate_feature_mask,
+		void *xstate_feature_src, size_t len)
+{
+	struct xregs_state *xsave = &current->thread.fpu.state.xsave;
+	struct fpu *fpu = &current->thread.fpu;
+	void *dst;
+
+	if (!boot_cpu_has(X86_FEATURE_XSAVE)) {
+		WARN_ONCE(1, "%s() attempted with no xsave support", __func__);
+		return;
+	}
+
+	/*
+	 * Tell the FPU code that we need the FPU state to be in
+	 * 'fpu' (not in the registers), and that we need it to
+	 * be stable while we write to it.
+	 */
+	fpu__current_fpstate_write_begin();
+
+	/*
+	 * This method *WILL* *NOT* work for compact-format
+	 * buffers.  If the 'xstate_feature_mask' is unset in
+	 * xcomp_bv then we may need to move other feature state
+	 * "up" in the buffer.
+	 */
+	if (xsave->header.xcomp_bv & xstate_feature_mask) {
+		WARN_ON_ONCE(1);
+		goto out;
+	}
+
+	/* find the location in the xsave buffer of the desired state */
+	dst = __raw_xsave_addr(&fpu->state.xsave, xstate_feature_mask);
+
+	/*
+	 * Make sure that the pointer being passed in did not
+	 * come from the xsave buffer itself.
+	 */
+	WARN_ONCE(xstate_feature_src == dst, "set from xsave buffer itself");
+
+	/* put the caller-provided data in the location */
+	memcpy(dst, xstate_feature_src, len);
+
+	/*
+	 * Mark the xfeature so that the CPU knows there is state
+	 * in the buffer now.
+	 */
+	fpu__xfeature_set_non_init(xsave, xstate_feature_mask);
+out:
+	/*
+	 * We are done writing to the 'fpu'.  Reenable preeption
+	 * and (possibly) move the fpstate back in to the fpregs.
+	 */
+	fpu__current_fpstate_write_end();
+}
+
+#define NR_VALID_PKRU_BITS (CONFIG_NR_PROTECTION_KEYS * 2)
+#define PKRU_VALID_MASK (NR_VALID_PKRU_BITS - 1)
+
+/*
+ * This will go out and modify the XSAVE buffer so that PKRU is
+ * set to a particular state for access to 'pkey'.
+ *
+ * PKRU state does affect kernel access to user memory.  We do
+ * not modfiy PKRU *itself* here, only the XSAVE state that will
+ * be restored in to PKRU when we return back to userspace.
+ */
+int arch_set_user_pkey_access(struct task_struct *tsk, int pkey,
+		unsigned long init_val)
+{
+	struct xregs_state *xsave = &tsk->thread.fpu.state.xsave;
+	struct pkru_state *old_pkru_state;
+	struct pkru_state new_pkru_state;
+	int pkey_shift = (pkey * PKRU_BITS_PER_PKEY);
+	u32 new_pkru_bits = 0;
+
+	/*
+	 * This check implies XSAVE support.  OSPKE only gets
+	 * set if we enable XSAVE and we enable PKU in XCR0.
+	 */
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return -EINVAL;
+
+	/* Set the bits we need in PKRU  */
+	if (init_val & PKEY_DISABLE_ACCESS)
+		new_pkru_bits |= PKRU_AD_BIT;
+	if (init_val & PKEY_DISABLE_WRITE)
+		new_pkru_bits |= PKRU_WD_BIT;
+
+	/* Shift the bits in to the correct place in PKRU for pkey. */
+	new_pkru_bits <<= pkey_shift;
+
+	/* Locate old copy of the state in the xsave buffer */
+	old_pkru_state = get_xsave_addr(xsave, XFEATURE_MASK_PKRU);
+
+	/*
+	 * When state is not in the buffer, it is in the init
+	 * state, set it manually.  Otherwise, copy out the old
+	 * state.
+	 */
+	if (!old_pkru_state)
+		new_pkru_state.pkru = 0;
+	else
+		new_pkru_state.pkru = old_pkru_state->pkru;
+
+	/* mask off any old bits in place */
+	new_pkru_state.pkru &= ~((PKRU_AD_BIT|PKRU_WD_BIT) << pkey_shift);
+	/* Set the newly-requested bits */
+	new_pkru_state.pkru |= new_pkru_bits;
+
+	/*
+	 * We could theoretically live without zeroing pkru.pad.
+	 * The current XSAVE feature state definition says that
+	 * only bytes 0->3 are used.  But we do not want to
+	 * chance leaking kernel stack out to userspace in case a
+	 * memcpy() of the whole xsave buffer was done.
+	 *
+	 * They're in the same cacheline anyway.
+	 */
+	new_pkru_state.pad = 0;
+
+	fpu__xfeature_set_state(XFEATURE_MASK_PKRU, &new_pkru_state,
+			sizeof(new_pkru_state));
+
+	return 0;
+}
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 311bcf338f07..d036cfb4495d 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -1,5 +1,5 @@
 /*
- * Code for replacing ftrace calls with jumps.
+ * Dynamic function tracing support.
  *
  * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com>
  *
@@ -81,9 +81,9 @@ within(unsigned long addr, unsigned long start, unsigned long end)
 static unsigned long text_ip_addr(unsigned long ip)
 {
 	/*
-	 * On x86_64, kernel text mappings are mapped read-only with
-	 * CONFIG_DEBUG_RODATA. So we use the kernel identity mapping instead
-	 * of the kernel text mapping to modify the kernel text.
+	 * On x86_64, kernel text mappings are mapped read-only, so we use
+	 * the kernel identity mapping instead of the kernel text mapping
+	 * to modify the kernel text.
 	 *
 	 * For 32bit kernels, these mappings are same and we can use
 	 * kernel identity mapping to modify code.
@@ -105,14 +105,14 @@ ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code,
 {
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
+	ftrace_expected = old_code;
+
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing. We do this by using the
-	 *  probe_kernel_* functions.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine, or before SMP starts.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	/* read the text we want to modify */
@@ -154,6 +154,8 @@ int ftrace_make_nop(struct module *mod,
 	if (addr == MCOUNT_ADDR)
 		return ftrace_modify_code_direct(rec->ip, old, new);
 
+	ftrace_expected = NULL;
+
 	/* Normal cases use add_brk_on_nop */
 	WARN_ONCE(1, "invalid use of ftrace_make_nop");
 	return -EINVAL;
@@ -220,6 +222,7 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 				 unsigned long addr)
 {
 	WARN_ON(1);
+	ftrace_expected = NULL;
 	return -EINVAL;
 }
 
@@ -314,6 +317,8 @@ static int add_break(unsigned long ip, const char *old)
 	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
 
+	ftrace_expected = old;
+
 	/* Make sure it is what we expect it to be */
 	if (memcmp(replaced, old, MCOUNT_INSN_SIZE) != 0)
 		return -EINVAL;
@@ -413,6 +418,8 @@ static int remove_breakpoint(struct dyn_ftrace *rec)
 		ftrace_addr = ftrace_get_addr_curr(rec);
 		nop = ftrace_call_replace(ip, ftrace_addr);
 
+		ftrace_expected = nop;
+
 		if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0)
 			return -EINVAL;
 	}
@@ -690,9 +697,8 @@ static inline void tramp_free(void *tramp) { }
 #endif
 
 /* Defined as markers to the end of the ftrace default trampolines */
-extern void ftrace_caller_end(void);
 extern void ftrace_regs_caller_end(void);
-extern void ftrace_return(void);
+extern void ftrace_epilogue(void);
 extern void ftrace_caller_op_ptr(void);
 extern void ftrace_regs_caller_op_ptr(void);
 
@@ -739,7 +745,7 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 		op_offset = (unsigned long)ftrace_regs_caller_op_ptr;
 	} else {
 		start_offset = (unsigned long)ftrace_caller;
-		end_offset = (unsigned long)ftrace_caller_end;
+		end_offset = (unsigned long)ftrace_epilogue;
 		op_offset = (unsigned long)ftrace_caller_op_ptr;
 	}
 
@@ -747,7 +753,7 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 
 	/*
 	 * Allocate enough size to store the ftrace_caller code,
-	 * the jmp to ftrace_return, as well as the address of
+	 * the jmp to ftrace_epilogue, as well as the address of
 	 * the ftrace_ops this trampoline is used for.
 	 */
 	trampoline = alloc_tramp(size + MCOUNT_INSN_SIZE + sizeof(void *));
@@ -765,8 +771,8 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 
 	ip = (unsigned long)trampoline + size;
 
-	/* The trampoline ends with a jmp to ftrace_return */
-	jmp = ftrace_jmp_replace(ip, (unsigned long)ftrace_return);
+	/* The trampoline ends with a jmp to ftrace_epilogue */
+	jmp = ftrace_jmp_replace(ip, (unsigned long)ftrace_epilogue);
 	memcpy(trampoline + size, jmp, MCOUNT_INSN_SIZE);
 
 	/*
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index f129a9af6357..1f4422d5c8d0 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -40,13 +40,8 @@ pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
 /* Wipe all early page tables except for the kernel symbol map */
 static void __init reset_early_page_tables(void)
 {
-	unsigned long i;
-
-	for (i = 0; i < PTRS_PER_PGD-1; i++)
-		early_level4_pgt[i].pgd = 0;
-
+	memset(early_level4_pgt, 0, sizeof(pgd_t)*(PTRS_PER_PGD-1));
 	next_early_pgt = 0;
-
 	write_cr3(__pa_nodebug(early_level4_pgt));
 }
 
@@ -54,7 +49,6 @@ static void __init reset_early_page_tables(void)
 int __init early_make_pgtable(unsigned long address)
 {
 	unsigned long physaddr = address - __PAGE_OFFSET;
-	unsigned long i;
 	pgdval_t pgd, *pgd_p;
 	pudval_t pud, *pud_p;
 	pmdval_t pmd, *pmd_p;
@@ -81,8 +75,7 @@ again:
 		}
 
 		pud_p = (pudval_t *)early_dynamic_pgts[next_early_pgt++];
-		for (i = 0; i < PTRS_PER_PUD; i++)
-			pud_p[i] = 0;
+		memset(pud_p, 0, sizeof(*pud_p) * PTRS_PER_PUD);
 		*pgd_p = (pgdval_t)pud_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE;
 	}
 	pud_p += pud_index(address);
@@ -97,8 +90,7 @@ again:
 		}
 
 		pmd_p = (pmdval_t *)early_dynamic_pgts[next_early_pgt++];
-		for (i = 0; i < PTRS_PER_PMD; i++)
-			pmd_p[i] = 0;
+		memset(pmd_p, 0, sizeof(*pmd_p) * PTRS_PER_PMD);
 		*pud_p = (pudval_t)pmd_p - __START_KERNEL_map + phys_base + _KERNPG_TABLE;
 	}
 	pmd = (physaddr & PMD_MASK) + early_pmd_flags;
@@ -192,5 +184,13 @@ void __init x86_64_start_reservations(char *real_mode_data)
 
 	reserve_ebda_region();
 
+	switch (boot_params.hdr.hardware_subarch) {
+	case X86_SUBARCH_INTEL_MID:
+		x86_intel_mid_early_setup();
+		break;
+	default:
+		break;
+	}
+
 	start_kernel();
 }
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 6bc9ae24b6d2..54cdbd2003fe 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -19,7 +19,7 @@
 #include <asm/setup.h>
 #include <asm/processor-flags.h>
 #include <asm/msr-index.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/percpu.h>
 #include <asm/nops.h>
 #include <asm/bootparam.h>
@@ -389,6 +389,12 @@ default_entry:
 	/* Make changes effective */
 	wrmsr
 
+	/*
+	 * And make sure that all the mappings we set up have NX set from
+	 * the beginning.
+	 */
+	orl $(1 << (_PAGE_BIT_NX - 32)), pa(__supported_pte_mask + 4)
+
 enable_paging:
 
 /*
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 1d40ca8a73f2..22fbf9df61bb 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -38,7 +38,6 @@
 #define pud_index(x)	(((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
 
 L4_PAGE_OFFSET = pgd_index(__PAGE_OFFSET)
-L3_PAGE_OFFSET = pud_index(__PAGE_OFFSET)
 L4_START_KERNEL = pgd_index(__START_KERNEL_map)
 L3_START_KERNEL = pud_index(__START_KERNEL_map)
 
@@ -65,6 +64,9 @@ startup_64:
 	 * tables and then reload them.
 	 */
 
+	/* Sanitize CPU configuration */
+	call verify_cpu
+
 	/*
 	 * Compute the delta between the address I am compiled to run at and the
 	 * address I am actually running at.
@@ -73,9 +75,7 @@ startup_64:
 	subq	$_text - __START_KERNEL_map, %rbp
 
 	/* Is the address not 2M aligned? */
-	movq	%rbp, %rax
-	andl	$~PMD_PAGE_MASK, %eax
-	testl	%eax, %eax
+	testl	$~PMD_PAGE_MASK, %ebp
 	jnz	bad_address
 
 	/*
@@ -174,6 +174,9 @@ ENTRY(secondary_startup_64)
 	 * after the boot processor executes this code.
 	 */
 
+	/* Sanitize CPU configuration */
+	call verify_cpu
+
 	movq	$(init_level4_pgt - __START_KERNEL_map), %rax
 1:
 
@@ -288,6 +291,8 @@ ENTRY(secondary_startup_64)
 	pushq	%rax		# target address in negative space
 	lretq
 
+#include "verify_cpu.S"
+
 #ifdef CONFIG_HOTPLUG_CPU
 /*
  * Boot CPU0 entry point. It's called from play_dead(). Everything has been set
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index b8e6ff5cd5d0..a1f0e4a5c47e 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -12,6 +12,7 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 
+#include <asm/cpufeature.h>
 #include <asm/irqdomain.h>
 #include <asm/fixmap.h>
 #include <asm/hpet.h>
@@ -716,7 +717,7 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
 	struct hpet_work_struct work;
 	struct hpet_dev *hdev = per_cpu(cpu_hpet_dev, cpu);
 
-	switch (action & 0xf) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_ONLINE:
 		INIT_DELAYED_WORK_ONSTACK(&work.work, hpet_work);
 		init_completion(&work.complete);
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index 50a3fad5b89f..2bcfb5f2bc44 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -300,6 +300,10 @@ static int arch_build_bp_info(struct perf_event *bp)
 			return -EINVAL;
 		if (bp->attr.bp_addr & (bp->attr.bp_len - 1))
 			return -EINVAL;
+
+		if (!boot_cpu_has(X86_FEATURE_BPEXT))
+			return -EOPNOTSUPP;
+
 		/*
 		 * It's impossible to use a range breakpoint to fake out
 		 * user vs kernel detection because bp_len - 1 can't
@@ -307,8 +311,6 @@ static int arch_build_bp_info(struct perf_event *bp)
 		 * breakpoints, then we'll have to check for kprobe-blacklisted
 		 * addresses anywhere in the range.
 		 */
-		if (!cpu_has_bpext)
-			return -EOPNOTSUPP;
 		info->mask = bp->attr.bp_len - 1;
 		info->len = X86_BREAKPOINT_LEN_1;
 	}
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index 16cb827a5b27..be22f5a2192e 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -295,16 +295,11 @@ static void unmask_8259A(void)
 	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
 }
 
-static void init_8259A(int auto_eoi)
+static int probe_8259A(void)
 {
 	unsigned long flags;
 	unsigned char probe_val = ~(1 << PIC_CASCADE_IR);
 	unsigned char new_val;
-
-	i8259A_auto_eoi = auto_eoi;
-
-	raw_spin_lock_irqsave(&i8259A_lock, flags);
-
 	/*
 	 * Check to see if we have a PIC.
 	 * Mask all except the cascade and read
@@ -312,16 +307,28 @@ static void init_8259A(int auto_eoi)
 	 * have a PIC, we will read 0xff as opposed to the
 	 * value we wrote.
 	 */
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
+
 	outb(0xff, PIC_SLAVE_IMR);	/* mask all of 8259A-2 */
 	outb(probe_val, PIC_MASTER_IMR);
 	new_val = inb(PIC_MASTER_IMR);
 	if (new_val != probe_val) {
 		printk(KERN_INFO "Using NULL legacy PIC\n");
 		legacy_pic = &null_legacy_pic;
-		raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-		return;
 	}
 
+	raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+	return nr_legacy_irqs();
+}
+
+static void init_8259A(int auto_eoi)
+{
+	unsigned long flags;
+
+	i8259A_auto_eoi = auto_eoi;
+
+	raw_spin_lock_irqsave(&i8259A_lock, flags);
+
 	outb(0xff, PIC_MASTER_IMR);	/* mask all of 8259A-1 */
 
 	/*
@@ -379,6 +386,10 @@ static int legacy_pic_irq_pending_noop(unsigned int irq)
 {
 	return 0;
 }
+static int legacy_pic_probe(void)
+{
+	return 0;
+}
 
 struct legacy_pic null_legacy_pic = {
 	.nr_legacy_irqs = 0,
@@ -388,6 +399,7 @@ struct legacy_pic null_legacy_pic = {
 	.mask_all = legacy_pic_noop,
 	.restore_mask = legacy_pic_noop,
 	.init = legacy_pic_int_noop,
+	.probe = legacy_pic_probe,
 	.irq_pending = legacy_pic_irq_pending_noop,
 	.make_irq = legacy_pic_uint_noop,
 };
@@ -400,6 +412,7 @@ struct legacy_pic default_legacy_pic = {
 	.mask_all = mask_8259A,
 	.restore_mask = unmask_8259A,
 	.init = init_8259A,
+	.probe = probe_8259A,
 	.irq_pending = i8259A_irq_pending,
 	.make_irq = make_8259A_irq,
 };
diff --git a/arch/x86/kernel/ioport.c b/arch/x86/kernel/ioport.c
index 37dae792dbbe..589b3193f102 100644
--- a/arch/x86/kernel/ioport.c
+++ b/arch/x86/kernel/ioport.c
@@ -96,9 +96,14 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 SYSCALL_DEFINE1(iopl, unsigned int, level)
 {
 	struct pt_regs *regs = current_pt_regs();
-	unsigned int old = (regs->flags >> 12) & 3;
 	struct thread_struct *t = &current->thread;
 
+	/*
+	 * Careful: the IOPL bits in regs->flags are undefined under Xen PV
+	 * and changing them has no effect.
+	 */
+	unsigned int old = t->iopl >> X86_EFLAGS_IOPL_BIT;
+
 	if (level > 3)
 		return -EINVAL;
 	/* Trying to gain more privileges? */
@@ -106,8 +111,9 @@ SYSCALL_DEFINE1(iopl, unsigned int, level)
 		if (!capable(CAP_SYS_RAWIO))
 			return -EPERM;
 	}
-	regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) | (level << 12);
-	t->iopl = level << 12;
+	regs->flags = (regs->flags & ~X86_EFLAGS_IOPL) |
+		(level << X86_EFLAGS_IOPL_BIT);
+	t->iopl = level << X86_EFLAGS_IOPL_BIT;
 	set_iopl_mask(t->iopl);
 
 	return 0;
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index f8062aaf5df9..61521dc19c10 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -462,7 +462,7 @@ void fixup_irqs(void)
 		 * non intr-remapping case, we can't wait till this interrupt
 		 * arrives at this cpu before completing the irq move.
 		 */
-		irq_force_complete_move(irq);
+		irq_force_complete_move(desc);
 
 		if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
 			break_affinity = 1;
@@ -470,6 +470,15 @@ void fixup_irqs(void)
 		}
 
 		chip = irq_data_get_irq_chip(data);
+		/*
+		 * The interrupt descriptor might have been cleaned up
+		 * already, but it is not yet removed from the radix tree
+		 */
+		if (!chip) {
+			raw_spin_unlock(&desc->lock);
+			continue;
+		}
+
 		if (!irqd_can_move_in_process_context(data) && chip->irq_mask)
 			chip->irq_mask(data);
 
diff --git a/arch/x86/kernel/irq_work.c b/arch/x86/kernel/irq_work.c
index dc5fa6a1e8d6..3512ba607361 100644
--- a/arch/x86/kernel/irq_work.c
+++ b/arch/x86/kernel/irq_work.c
@@ -1,7 +1,7 @@
 /*
  * x86 specific code for irq_work
  *
- * Copyright (C) 2010 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ * Copyright (C) 2010 Red Hat, Inc., Peter Zijlstra
  */
 
 #include <linux/kernel.h>
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index 0f8a6bbaaa44..2af478e3fd4e 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -271,7 +271,7 @@ static int bzImage64_probe(const char *buf, unsigned long len)
 	int ret = -ENOEXEC;
 	struct setup_header *header;
 
-	/* kernel should be atleast two sectors long */
+	/* kernel should be at least two sectors long */
 	if (len < 2 * 512) {
 		pr_err("File is too short to be a bzImage\n");
 		return ret;
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 44256a62702b..2da6ee9ae69b 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -609,9 +609,9 @@ static struct notifier_block kgdb_notifier = {
 };
 
 /**
- *	kgdb_arch_init - Perform any architecture specific initalization.
+ *	kgdb_arch_init - Perform any architecture specific initialization.
  *
- *	This function will handle the initalization of any architecture
+ *	This function will handle the initialization of any architecture
  *	specific callbacks.
  */
 int kgdb_arch_init(void)
@@ -750,9 +750,7 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
 int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 {
 	int err;
-#ifdef CONFIG_DEBUG_RODATA
 	char opc[BREAK_INSTR_SIZE];
-#endif /* CONFIG_DEBUG_RODATA */
 
 	bpt->type = BP_BREAKPOINT;
 	err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
@@ -761,7 +759,6 @@ int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 		return err;
 	err = probe_kernel_write((char *)bpt->bpt_addr,
 				 arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
-#ifdef CONFIG_DEBUG_RODATA
 	if (!err)
 		return err;
 	/*
@@ -778,13 +775,12 @@ int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 	if (memcmp(opc, arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE))
 		return -EINVAL;
 	bpt->type = BP_POKE_BREAKPOINT;
-#endif /* CONFIG_DEBUG_RODATA */
+
 	return err;
 }
 
 int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
 {
-#ifdef CONFIG_DEBUG_RODATA
 	int err;
 	char opc[BREAK_INSTR_SIZE];
 
@@ -801,8 +797,8 @@ int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
 	if (err || memcmp(opc, bpt->saved_instr, BREAK_INSTR_SIZE))
 		goto knl_write;
 	return err;
+
 knl_write:
-#endif /* CONFIG_DEBUG_RODATA */
 	return probe_kernel_write((char *)bpt->bpt_addr,
 				  (char *)bpt->saved_instr, BREAK_INSTR_SIZE);
 }
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 1deffe6cc873..ae703acb85c1 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -49,6 +49,7 @@
 #include <linux/kdebug.h>
 #include <linux/kallsyms.h>
 #include <linux/ftrace.h>
+#include <linux/frame.h>
 
 #include <asm/cacheflush.h>
 #include <asm/desc.h>
@@ -671,39 +672,39 @@ NOKPROBE_SYMBOL(kprobe_int3_handler);
  * When a retprobed function returns, this code saves registers and
  * calls trampoline_handler() runs, which calls the kretprobe's handler.
  */
-static void __used kretprobe_trampoline_holder(void)
-{
-	asm volatile (
-			".global kretprobe_trampoline\n"
-			"kretprobe_trampoline: \n"
+asm(
+	".global kretprobe_trampoline\n"
+	".type kretprobe_trampoline, @function\n"
+	"kretprobe_trampoline:\n"
 #ifdef CONFIG_X86_64
-			/* We don't bother saving the ss register */
-			"	pushq %rsp\n"
-			"	pushfq\n"
-			SAVE_REGS_STRING
-			"	movq %rsp, %rdi\n"
-			"	call trampoline_handler\n"
-			/* Replace saved sp with true return address. */
-			"	movq %rax, 152(%rsp)\n"
-			RESTORE_REGS_STRING
-			"	popfq\n"
+	/* We don't bother saving the ss register */
+	"	pushq %rsp\n"
+	"	pushfq\n"
+	SAVE_REGS_STRING
+	"	movq %rsp, %rdi\n"
+	"	call trampoline_handler\n"
+	/* Replace saved sp with true return address. */
+	"	movq %rax, 152(%rsp)\n"
+	RESTORE_REGS_STRING
+	"	popfq\n"
 #else
-			"	pushf\n"
-			SAVE_REGS_STRING
-			"	movl %esp, %eax\n"
-			"	call trampoline_handler\n"
-			/* Move flags to cs */
-			"	movl 56(%esp), %edx\n"
-			"	movl %edx, 52(%esp)\n"
-			/* Replace saved flags with true return address. */
-			"	movl %eax, 56(%esp)\n"
-			RESTORE_REGS_STRING
-			"	popf\n"
+	"	pushf\n"
+	SAVE_REGS_STRING
+	"	movl %esp, %eax\n"
+	"	call trampoline_handler\n"
+	/* Move flags to cs */
+	"	movl 56(%esp), %edx\n"
+	"	movl %edx, 52(%esp)\n"
+	/* Replace saved flags with true return address. */
+	"	movl %eax, 56(%esp)\n"
+	RESTORE_REGS_STRING
+	"	popf\n"
 #endif
-			"	ret\n");
-}
-NOKPROBE_SYMBOL(kretprobe_trampoline_holder);
+	"	ret\n"
+	".size kretprobe_trampoline, .-kretprobe_trampoline\n"
+);
 NOKPROBE_SYMBOL(kretprobe_trampoline);
+STACK_FRAME_NON_STANDARD(kretprobe_trampoline);
 
 /*
  * Called from kretprobe_trampoline
@@ -988,7 +989,7 @@ int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		 * In case the user-specified fault handler returned
 		 * zero, try to fix up.
 		 */
-		if (fixup_exception(regs))
+		if (fixup_exception(regs, trapnr))
 			return 1;
 
 		/*
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index 47190bd399e7..807950860fb7 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -36,6 +36,7 @@
 #include <linux/kprobes.h>
 #include <linux/debugfs.h>
 #include <linux/nmi.h>
+#include <linux/swait.h>
 #include <asm/timer.h>
 #include <asm/cpu.h>
 #include <asm/traps.h>
@@ -91,14 +92,14 @@ static void kvm_io_delay(void)
 
 struct kvm_task_sleep_node {
 	struct hlist_node link;
-	wait_queue_head_t wq;
+	struct swait_queue_head wq;
 	u32 token;
 	int cpu;
 	bool halted;
 };
 
 static struct kvm_task_sleep_head {
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	struct hlist_head list;
 } async_pf_sleepers[KVM_TASK_SLEEP_HASHSIZE];
 
@@ -122,17 +123,17 @@ void kvm_async_pf_task_wait(u32 token)
 	u32 key = hash_32(token, KVM_TASK_SLEEP_HASHBITS);
 	struct kvm_task_sleep_head *b = &async_pf_sleepers[key];
 	struct kvm_task_sleep_node n, *e;
-	DEFINE_WAIT(wait);
+	DECLARE_SWAITQUEUE(wait);
 
 	rcu_irq_enter();
 
-	spin_lock(&b->lock);
+	raw_spin_lock(&b->lock);
 	e = _find_apf_task(b, token);
 	if (e) {
 		/* dummy entry exist -> wake up was delivered ahead of PF */
 		hlist_del(&e->link);
 		kfree(e);
-		spin_unlock(&b->lock);
+		raw_spin_unlock(&b->lock);
 
 		rcu_irq_exit();
 		return;
@@ -141,13 +142,13 @@ void kvm_async_pf_task_wait(u32 token)
 	n.token = token;
 	n.cpu = smp_processor_id();
 	n.halted = is_idle_task(current) || preempt_count() > 1;
-	init_waitqueue_head(&n.wq);
+	init_swait_queue_head(&n.wq);
 	hlist_add_head(&n.link, &b->list);
-	spin_unlock(&b->lock);
+	raw_spin_unlock(&b->lock);
 
 	for (;;) {
 		if (!n.halted)
-			prepare_to_wait(&n.wq, &wait, TASK_UNINTERRUPTIBLE);
+			prepare_to_swait(&n.wq, &wait, TASK_UNINTERRUPTIBLE);
 		if (hlist_unhashed(&n.link))
 			break;
 
@@ -166,7 +167,7 @@ void kvm_async_pf_task_wait(u32 token)
 		}
 	}
 	if (!n.halted)
-		finish_wait(&n.wq, &wait);
+		finish_swait(&n.wq, &wait);
 
 	rcu_irq_exit();
 	return;
@@ -178,8 +179,8 @@ static void apf_task_wake_one(struct kvm_task_sleep_node *n)
 	hlist_del_init(&n->link);
 	if (n->halted)
 		smp_send_reschedule(n->cpu);
-	else if (waitqueue_active(&n->wq))
-		wake_up(&n->wq);
+	else if (swait_active(&n->wq))
+		swake_up(&n->wq);
 }
 
 static void apf_task_wake_all(void)
@@ -189,14 +190,14 @@ static void apf_task_wake_all(void)
 	for (i = 0; i < KVM_TASK_SLEEP_HASHSIZE; i++) {
 		struct hlist_node *p, *next;
 		struct kvm_task_sleep_head *b = &async_pf_sleepers[i];
-		spin_lock(&b->lock);
+		raw_spin_lock(&b->lock);
 		hlist_for_each_safe(p, next, &b->list) {
 			struct kvm_task_sleep_node *n =
 				hlist_entry(p, typeof(*n), link);
 			if (n->cpu == smp_processor_id())
 				apf_task_wake_one(n);
 		}
-		spin_unlock(&b->lock);
+		raw_spin_unlock(&b->lock);
 	}
 }
 
@@ -212,7 +213,7 @@ void kvm_async_pf_task_wake(u32 token)
 	}
 
 again:
-	spin_lock(&b->lock);
+	raw_spin_lock(&b->lock);
 	n = _find_apf_task(b, token);
 	if (!n) {
 		/*
@@ -225,17 +226,17 @@ again:
 			 * Allocation failed! Busy wait while other cpu
 			 * handles async PF.
 			 */
-			spin_unlock(&b->lock);
+			raw_spin_unlock(&b->lock);
 			cpu_relax();
 			goto again;
 		}
 		n->token = token;
 		n->cpu = smp_processor_id();
-		init_waitqueue_head(&n->wq);
+		init_swait_queue_head(&n->wq);
 		hlist_add_head(&n->link, &b->list);
 	} else
 		apf_task_wake_one(n);
-	spin_unlock(&b->lock);
+	raw_spin_unlock(&b->lock);
 	return;
 }
 EXPORT_SYMBOL_GPL(kvm_async_pf_task_wake);
@@ -486,7 +487,7 @@ void __init kvm_guest_init(void)
 	paravirt_ops_setup();
 	register_reboot_notifier(&kvm_pv_reboot_nb);
 	for (i = 0; i < KVM_TASK_SLEEP_HASHSIZE; i++)
-		spin_lock_init(&async_pf_sleepers[i].lock);
+		raw_spin_lock_init(&async_pf_sleepers[i].lock);
 	if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF))
 		x86_init.irqs.trap_init = kvm_apf_trap_init;
 
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 2bd81e302427..1d39bfbd26bb 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -45,6 +45,11 @@ early_param("no-kvmclock", parse_no_kvmclock);
 static struct pvclock_vsyscall_time_info *hv_clock;
 static struct pvclock_wall_clock wall_clock;
 
+struct pvclock_vsyscall_time_info *pvclock_pvti_cpu0_va(void)
+{
+	return hv_clock;
+}
+
 /*
  * The wallclock is the time of day when we booted. Since then, some time may
  * have elapsed since the hypervisor wrote the data. So we try to account for
@@ -221,7 +226,7 @@ static void kvm_setup_secondary_clock(void)
  * registered memory location. If the guest happens to shutdown, this memory
  * won't be valid. In cases like kexec, in which you install a new kernel, this
  * means a random memory location will be kept being written. So before any
- * kind of shutdown from our side, we unregister the clock by writting anything
+ * kind of shutdown from our side, we unregister the clock by writing anything
  * that does not have the 'enable' bit set in the msr
  */
 #ifdef CONFIG_KEXEC_CORE
@@ -305,7 +310,6 @@ int __init kvm_setup_vsyscall_timeinfo(void)
 {
 #ifdef CONFIG_X86_64
 	int cpu;
-	int ret;
 	u8 flags;
 	struct pvclock_vcpu_time_info *vcpu_time;
 	unsigned int size;
@@ -325,11 +329,6 @@ int __init kvm_setup_vsyscall_timeinfo(void)
 		return 1;
 	}
 
-	if ((ret = pvclock_init_vsyscall(hv_clock, size))) {
-		put_cpu();
-		return ret;
-	}
-
 	put_cpu();
 
 	kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK;
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 6acc9dd91f36..6707039b9032 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -103,7 +103,7 @@ static void free_ldt_struct(struct ldt_struct *ldt)
  * we do not have to muck with descriptors here, that is
  * done in switch_mm() as needed.
  */
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+int init_new_context_ldt(struct task_struct *tsk, struct mm_struct *mm)
 {
 	struct ldt_struct *new_ldt;
 	struct mm_struct *old_mm;
@@ -144,7 +144,7 @@ out_unlock:
  *
  * 64bit: Don't touch the LDT register - we're already in the next thread.
  */
-void destroy_context(struct mm_struct *mm)
+void destroy_context_ldt(struct mm_struct *mm)
 {
 	free_ldt_struct(mm->context.ldt);
 	mm->context.ldt = NULL;
diff --git a/arch/x86/kernel/livepatch.c b/arch/x86/kernel/livepatch.c
index d1d35ccffed3..92fc1a51f994 100644
--- a/arch/x86/kernel/livepatch.c
+++ b/arch/x86/kernel/livepatch.c
@@ -20,8 +20,6 @@
 
 #include <linux/module.h>
 #include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-#include <asm/page_types.h>
 #include <asm/elf.h>
 #include <asm/livepatch.h>
 
@@ -38,11 +36,10 @@
 int klp_write_module_reloc(struct module *mod, unsigned long type,
 			   unsigned long loc, unsigned long value)
 {
-	int ret, numpages, size = 4;
-	bool readonly;
+	size_t size = 4;
 	unsigned long val;
-	unsigned long core = (unsigned long)mod->module_core;
-	unsigned long core_size = mod->core_size;
+	unsigned long core = (unsigned long)mod->core_layout.base;
+	unsigned long core_size = mod->core_layout.size;
 
 	switch (type) {
 	case R_X86_64_NONE:
@@ -69,23 +66,5 @@ int klp_write_module_reloc(struct module *mod, unsigned long type,
 		/* loc does not point to any symbol inside the module */
 		return -EINVAL;
 
-	readonly = false;
-
-#ifdef CONFIG_DEBUG_SET_MODULE_RONX
-	if (loc < core + mod->core_ro_size)
-		readonly = true;
-#endif
-
-	/* determine if the relocation spans a page boundary */
-	numpages = ((loc & PAGE_MASK) == ((loc + size) & PAGE_MASK)) ? 1 : 2;
-
-	if (readonly)
-		set_memory_rw(loc & PAGE_MASK, numpages);
-
-	ret = probe_kernel_write((void *)loc, &val, size);
-
-	if (readonly)
-		set_memory_ro(loc & PAGE_MASK, numpages);
-
-	return ret;
+	return probe_kernel_write((void *)loc, &val, size);
 }
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 819ab3f9c9c7..ba7fbba9831b 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -385,6 +385,7 @@ int arch_kimage_file_post_load_cleanup(struct kimage *image)
 	return image->fops->cleanup(image->image_loader_data);
 }
 
+#ifdef CONFIG_KEXEC_VERIFY_SIG
 int arch_kexec_kernel_verify_sig(struct kimage *image, void *kernel,
 				 unsigned long kernel_len)
 {
@@ -395,6 +396,7 @@ int arch_kexec_kernel_verify_sig(struct kimage *image, void *kernel,
 
 	return image->fops->verify_sig(kernel, kernel_len);
 }
+#endif
 
 /*
  * Apply purgatory relocations.
diff --git a/arch/x86/kernel/mcount_64.S b/arch/x86/kernel/mcount_64.S
index 94ea120fa21f..ed48a9f465f8 100644
--- a/arch/x86/kernel/mcount_64.S
+++ b/arch/x86/kernel/mcount_64.S
@@ -168,12 +168,14 @@ GLOBAL(ftrace_call)
 	restore_mcount_regs
 
 	/*
-	 * The copied trampoline must call ftrace_return as it
+	 * The copied trampoline must call ftrace_epilogue as it
 	 * still may need to call the function graph tracer.
+	 *
+	 * The code up to this label is copied into trampolines so
+	 * think twice before adding any new code or changing the
+	 * layout here.
 	 */
-GLOBAL(ftrace_caller_end)
-
-GLOBAL(ftrace_return)
+GLOBAL(ftrace_epilogue)
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 GLOBAL(ftrace_graph_call)
@@ -244,14 +246,14 @@ GLOBAL(ftrace_regs_call)
 	popfq
 
 	/*
-	 * As this jmp to ftrace_return can be a short jump
+	 * As this jmp to ftrace_epilogue can be a short jump
 	 * it must not be copied into the trampoline.
 	 * The trampoline will add the code to jump
 	 * to the return.
 	 */
 GLOBAL(ftrace_regs_caller_end)
 
-	jmp ftrace_return
+	jmp ftrace_epilogue
 
 END(ftrace_regs_caller)
 
@@ -278,6 +280,12 @@ trace:
 	/* save_mcount_regs fills in first two parameters */
 	save_mcount_regs
 
+	/*
+	 * When DYNAMIC_FTRACE is not defined, ARCH_SUPPORTS_FTRACE_OPS is not
+	 * set (see include/asm/ftrace.h and include/linux/ftrace.h).  Only the
+	 * ip and parent ip are used and the list function is called when
+	 * function tracing is enabled.
+	 */
 	call   *ftrace_trace_function
 
 	restore_mcount_regs
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 30ca7607cbbb..97340f2c437c 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -408,7 +408,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 	processor.cpuflag = CPU_ENABLED;
 	processor.cpufeature = (boot_cpu_data.x86 << 8) |
 	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
-	processor.featureflag = boot_cpu_data.x86_capability[0];
+	processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
 	processor.reserved[0] = 0;
 	processor.reserved[1] = 0;
 	for (i = 0; i < 2; i++) {
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 113e70784854..7f3550acde1b 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -40,33 +40,11 @@
 #include <linux/uaccess.h>
 #include <linux/gfp.h>
 
-#include <asm/processor.h>
+#include <asm/cpufeature.h>
 #include <asm/msr.h>
 
 static struct class *msr_class;
 
-static loff_t msr_seek(struct file *file, loff_t offset, int orig)
-{
-	loff_t ret;
-	struct inode *inode = file_inode(file);
-
-	mutex_lock(&inode->i_mutex);
-	switch (orig) {
-	case SEEK_SET:
-		file->f_pos = offset;
-		ret = file->f_pos;
-		break;
-	case SEEK_CUR:
-		file->f_pos += offset;
-		ret = file->f_pos;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-	mutex_unlock(&inode->i_mutex);
-	return ret;
-}
-
 static ssize_t msr_read(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos)
 {
@@ -194,7 +172,7 @@ static int msr_open(struct inode *inode, struct file *file)
  */
 static const struct file_operations msr_fops = {
 	.owner = THIS_MODULE,
-	.llseek = msr_seek,
+	.llseek = no_seek_end_llseek,
 	.read = msr_read,
 	.write = msr_write,
 	.open = msr_open,
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 697f90db0e37..04b132a767f1 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -29,6 +29,8 @@
 #include <asm/mach_traps.h>
 #include <asm/nmi.h>
 #include <asm/x86_init.h>
+#include <asm/reboot.h>
+#include <asm/cache.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/nmi.h>
@@ -68,7 +70,7 @@ struct nmi_stats {
 
 static DEFINE_PER_CPU(struct nmi_stats, nmi_stats);
 
-static int ignore_nmis;
+static int ignore_nmis __read_mostly;
 
 int unknown_nmi_panic;
 /*
@@ -231,7 +233,7 @@ pci_serr_error(unsigned char reason, struct pt_regs *regs)
 #endif
 
 	if (panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
+		nmi_panic(regs, "NMI: Not continuing");
 
 	pr_emerg("Dazed and confused, but trying to continue\n");
 
@@ -255,8 +257,16 @@ io_check_error(unsigned char reason, struct pt_regs *regs)
 		 reason, smp_processor_id());
 	show_regs(regs);
 
-	if (panic_on_io_nmi)
-		panic("NMI IOCK error: Not continuing");
+	if (panic_on_io_nmi) {
+		nmi_panic(regs, "NMI IOCK error: Not continuing");
+
+		/*
+		 * If we end up here, it means we have received an NMI while
+		 * processing panic(). Simply return without delaying and
+		 * re-enabling NMIs.
+		 */
+		return;
+	}
 
 	/* Re-enable the IOCK line, wait for a few seconds */
 	reason = (reason & NMI_REASON_CLEAR_MASK) | NMI_REASON_CLEAR_IOCHK;
@@ -297,7 +307,7 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 
 	pr_emerg("Do you have a strange power saving mode enabled?\n");
 	if (unknown_nmi_panic || panic_on_unrecovered_nmi)
-		panic("NMI: Not continuing");
+		nmi_panic(regs, "NMI: Not continuing");
 
 	pr_emerg("Dazed and confused, but trying to continue\n");
 }
@@ -348,8 +358,19 @@ static void default_do_nmi(struct pt_regs *regs)
 		return;
 	}
 
-	/* Non-CPU-specific NMI: NMI sources can be processed on any CPU */
-	raw_spin_lock(&nmi_reason_lock);
+	/*
+	 * Non-CPU-specific NMI: NMI sources can be processed on any CPU.
+	 *
+	 * Another CPU may be processing panic routines while holding
+	 * nmi_reason_lock. Check if the CPU issued the IPI for crash dumping,
+	 * and if so, call its callback directly.  If there is no CPU preparing
+	 * crash dump, we simply loop here.
+	 */
+	while (!raw_spin_trylock(&nmi_reason_lock)) {
+		run_crash_ipi_callback(regs);
+		cpu_relax();
+	}
+
 	reason = x86_platform.get_nmi_reason();
 
 	if (reason & NMI_REASON_MASK) {
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index c2130aef3f9d..f08ac28b8136 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -74,16 +74,6 @@ void __init default_banner(void)
 /* Undefined instruction for dealing with missing ops pointers. */
 static const unsigned char ud2a[] = { 0x0f, 0x0b };
 
-unsigned paravirt_patch_nop(void)
-{
-	return 0;
-}
-
-unsigned paravirt_patch_ignore(unsigned len)
-{
-	return len;
-}
-
 struct branch {
 	unsigned char opcode;
 	u32 delta;
@@ -133,7 +123,6 @@ static void *get_call_destination(u8 type)
 		.pv_time_ops = pv_time_ops,
 		.pv_cpu_ops = pv_cpu_ops,
 		.pv_irq_ops = pv_irq_ops,
-		.pv_apic_ops = pv_apic_ops,
 		.pv_mmu_ops = pv_mmu_ops,
 #ifdef CONFIG_PARAVIRT_SPINLOCKS
 		.pv_lock_ops = pv_lock_ops,
@@ -152,8 +141,7 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 		/* If there's no function, patch it with a ud2a (BUG) */
 		ret = paravirt_patch_insns(insnbuf, len, ud2a, ud2a+sizeof(ud2a));
 	else if (opfunc == _paravirt_nop)
-		/* If the operation is a nop, then nop the callsite */
-		ret = paravirt_patch_nop();
+		ret = 0;
 
 	/* identity functions just return their single argument */
 	else if (opfunc == _paravirt_ident_32)
@@ -162,10 +150,6 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 		ret = paravirt_patch_ident_64(insnbuf, len);
 
 	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
-#ifdef CONFIG_X86_32
-		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit) ||
-#endif
-		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret32) ||
 		 type == PARAVIRT_PATCH(pv_cpu_ops.usergs_sysret64))
 		/* If operation requires a jmp, then jmp */
 		ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len);
@@ -220,8 +204,6 @@ static u64 native_steal_clock(int cpu)
 
 /* These are in entry.S */
 extern void native_iret(void);
-extern void native_irq_enable_sysexit(void);
-extern void native_usergs_sysret32(void);
 extern void native_usergs_sysret64(void);
 
 static struct resource reserve_ioports = {
@@ -379,13 +361,7 @@ __visible struct pv_cpu_ops pv_cpu_ops = {
 
 	.load_sp0 = native_load_sp0,
 
-#if defined(CONFIG_X86_32)
-	.irq_enable_sysexit = native_irq_enable_sysexit,
-#endif
 #ifdef CONFIG_X86_64
-#ifdef CONFIG_IA32_EMULATION
-	.usergs_sysret32 = native_usergs_sysret32,
-#endif
 	.usergs_sysret64 = native_usergs_sysret64,
 #endif
 	.iret = native_iret,
@@ -403,12 +379,6 @@ NOKPROBE_SYMBOL(native_get_debugreg);
 NOKPROBE_SYMBOL(native_set_debugreg);
 NOKPROBE_SYMBOL(native_load_idt);
 
-struct pv_apic_ops pv_apic_ops = {
-#ifdef CONFIG_X86_LOCAL_APIC
-	.startup_ipi_hook = paravirt_nop,
-#endif
-};
-
 #if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE)
 /* 32-bit pagetable entries */
 #define PTE_IDENT	__PV_IS_CALLEE_SAVE(_paravirt_ident_32)
@@ -444,9 +414,6 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.set_pmd = native_set_pmd,
 	.set_pmd_at = native_set_pmd_at,
 	.pte_update = paravirt_nop,
-	.pte_update_defer = paravirt_nop,
-	.pmd_update = paravirt_nop,
-	.pmd_update_defer = paravirt_nop,
 
 	.ptep_modify_prot_start = __ptep_modify_prot_start,
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
@@ -492,6 +459,5 @@ struct pv_mmu_ops pv_mmu_ops = {
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
 EXPORT_SYMBOL    (pv_mmu_ops);
-EXPORT_SYMBOL_GPL(pv_apic_ops);
 EXPORT_SYMBOL_GPL(pv_info);
 EXPORT_SYMBOL    (pv_irq_ops);
diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
index c89f50a76e97..158dc0650d5d 100644
--- a/arch/x86/kernel/paravirt_patch_32.c
+++ b/arch/x86/kernel/paravirt_patch_32.c
@@ -5,7 +5,6 @@ DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
 DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
 DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
 DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "sti; sysexit");
 DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
 DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
 DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
@@ -46,7 +45,6 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, restore_fl);
 		PATCH_SITE(pv_irq_ops, save_fl);
 		PATCH_SITE(pv_cpu_ops, iret);
-		PATCH_SITE(pv_cpu_ops, irq_enable_sysexit);
 		PATCH_SITE(pv_mmu_ops, read_cr2);
 		PATCH_SITE(pv_mmu_ops, read_cr3);
 		PATCH_SITE(pv_mmu_ops, write_cr3);
diff --git a/arch/x86/kernel/paravirt_patch_64.c b/arch/x86/kernel/paravirt_patch_64.c
index 8aa05583bc42..e70087a04cc8 100644
--- a/arch/x86/kernel/paravirt_patch_64.c
+++ b/arch/x86/kernel/paravirt_patch_64.c
@@ -13,9 +13,7 @@ DEF_NATIVE(pv_mmu_ops, flush_tlb_single, "invlpg (%rdi)");
 DEF_NATIVE(pv_cpu_ops, clts, "clts");
 DEF_NATIVE(pv_cpu_ops, wbinvd, "wbinvd");
 
-DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "swapgs; sti; sysexit");
 DEF_NATIVE(pv_cpu_ops, usergs_sysret64, "swapgs; sysretq");
-DEF_NATIVE(pv_cpu_ops, usergs_sysret32, "swapgs; sysretl");
 DEF_NATIVE(pv_cpu_ops, swapgs, "swapgs");
 
 DEF_NATIVE(, mov32, "mov %edi, %eax");
@@ -55,7 +53,6 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 		PATCH_SITE(pv_irq_ops, save_fl);
 		PATCH_SITE(pv_irq_ops, irq_enable);
 		PATCH_SITE(pv_irq_ops, irq_disable);
-		PATCH_SITE(pv_cpu_ops, usergs_sysret32);
 		PATCH_SITE(pv_cpu_ops, usergs_sysret64);
 		PATCH_SITE(pv_cpu_ops, swapgs);
 		PATCH_SITE(pv_mmu_ops, read_cr2);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 0497f719977d..833b1d329c47 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -180,13 +180,13 @@ static void calioc2_dump_error_regs(struct iommu_table *tbl);
 static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl);
 static void get_tce_space_from_tar(void);
 
-static struct cal_chipset_ops calgary_chip_ops = {
+static const struct cal_chipset_ops calgary_chip_ops = {
 	.handle_quirks = calgary_handle_quirks,
 	.tce_cache_blast = calgary_tce_cache_blast,
 	.dump_error_regs = calgary_dump_error_regs
 };
 
-static struct cal_chipset_ops calioc2_chip_ops = {
+static const struct cal_chipset_ops calioc2_chip_ops = {
 	.handle_quirks = calioc2_handle_quirks,
 	.tce_cache_blast = calioc2_tce_cache_blast,
 	.dump_error_regs = calioc2_dump_error_regs
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index cd99433b8ba1..6ba014c61d62 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -90,7 +90,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 again:
 	page = NULL;
 	/* CMA can be used only in the context which permits sleeping */
-	if (flag & __GFP_WAIT) {
+	if (gfpflags_allow_blocking(flag)) {
 		page = dma_alloc_from_contiguous(dev, count, get_order(size));
 		if (page && page_to_phys(page) + size > dma_mask) {
 			dma_release_from_contiguous(dev, page, count);
diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index adf0392d549a..7c577a178859 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -88,7 +88,7 @@ int __init pci_swiotlb_detect_4gb(void)
 {
 	/* don't initialize swiotlb if iommu=off (no_iommu=1) */
 #ifdef CONFIG_X86_64
-	if (!no_iommu && max_pfn > MAX_DMA32_PFN)
+	if (!no_iommu && max_possible_pfn > MAX_DMA32_PFN)
 		swiotlb = 1;
 #endif
 	return swiotlb;
diff --git a/arch/x86/kernel/pmem.c b/arch/x86/kernel/pmem.c
index 4f00b63d7ff3..92f70147a9a6 100644
--- a/arch/x86/kernel/pmem.c
+++ b/arch/x86/kernel/pmem.c
@@ -4,10 +4,22 @@
  */
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/ioport.h>
+
+static int found(u64 start, u64 end, void *data)
+{
+	return 1;
+}
 
 static __init int register_e820_pmem(void)
 {
 	struct platform_device *pdev;
+	int rc;
+
+	rc = walk_iomem_res_desc(IORES_DESC_PERSISTENT_MEMORY_LEGACY,
+				 IORESOURCE_MEM, 0, -1, NULL, found);
+	if (rc <= 0)
+		return 0;
 
 	/*
 	 * See drivers/nvdimm/e820.c for the implementation, this is
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 9f7c21c22477..2915d54e9dd5 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -57,6 +57,9 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, cpu_tss) = {
 	  */
 	.io_bitmap		= { [0 ... IO_BITMAP_LONGS] = ~0 },
 #endif
+#ifdef CONFIG_X86_32
+	.SYSENTER_stack_canary	= STACK_END_MAGIC,
+#endif
 };
 EXPORT_PER_CPU_SYMBOL(cpu_tss);
 
@@ -418,9 +421,9 @@ static void mwait_idle(void)
 	if (!current_set_polling_and_test()) {
 		trace_cpu_idle_rcuidle(1, smp_processor_id());
 		if (this_cpu_has(X86_BUG_CLFLUSH_MONITOR)) {
-			smp_mb(); /* quirk */
+			mb(); /* quirk */
 			clflush((void *)&current_thread_info()->flags);
-			smp_mb(); /* quirk */
+			mb(); /* quirk */
 		}
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e835d263a33b..6cbab31ac23a 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -48,6 +48,7 @@
 #include <asm/syscalls.h>
 #include <asm/debugreg.h>
 #include <asm/switch_to.h>
+#include <asm/xen/hypervisor.h>
 
 asmlinkage extern void ret_from_fork(void);
 
@@ -116,6 +117,8 @@ void __show_regs(struct pt_regs *regs, int all)
 	printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2);
 	printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7);
 
+	if (boot_cpu_has(X86_FEATURE_OSPKE))
+		printk(KERN_DEFAULT "PKRU: %08x\n", read_pkru());
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -125,7 +128,7 @@ void release_thread(struct task_struct *dead_task)
 		if (dead_task->mm->context.ldt) {
 			pr_warn("WARNING: dead process %s still has LDT? <%p/%d>\n",
 				dead_task->comm,
-				dead_task->mm->context.ldt,
+				dead_task->mm->context.ldt->entries,
 				dead_task->mm->context.ldt->size);
 			BUG();
 		}
@@ -411,6 +414,17 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
 		__switch_to_xtra(prev_p, next_p, tss);
 
+#ifdef CONFIG_XEN
+	/*
+	 * On Xen PV, IOPL bits in pt_regs->flags have no effect, and
+	 * current_pt_regs()->flags may not match the current task's
+	 * intended IOPL.  We need to switch it manually.
+	 */
+	if (unlikely(static_cpu_has(X86_FEATURE_XENPV) &&
+		     prev->iopl != next->iopl))
+		xen_set_iopl_mask(next->iopl);
+#endif
+
 	if (static_cpu_has_bug(X86_BUG_SYSRET_SS_ATTRS)) {
 		/*
 		 * AMD CPUs have a misfeature: SYSRET sets the SS selector but
@@ -476,7 +490,7 @@ void set_personality_ia32(bool x32)
 		if (current->mm)
 			current->mm->context.ia32_compat = TIF_X32;
 		current->personality &= ~READ_IMPLIES_EXEC;
-		/* is_compat_task() uses the presence of the x32
+		/* in_compat_syscall() uses the presence of the x32
 		   syscall bit flag to determine compat status */
 		current_thread_info()->status &= ~TS_COMPAT;
 	} else {
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 558f50edebca..32e9d9cbb884 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -124,21 +124,6 @@ const char *regs_query_register_name(unsigned int offset)
 	return NULL;
 }
 
-static const int arg_offs_table[] = {
-#ifdef CONFIG_X86_32
-	[0] = offsetof(struct pt_regs, ax),
-	[1] = offsetof(struct pt_regs, dx),
-	[2] = offsetof(struct pt_regs, cx)
-#else /* CONFIG_X86_64 */
-	[0] = offsetof(struct pt_regs, di),
-	[1] = offsetof(struct pt_regs, si),
-	[2] = offsetof(struct pt_regs, dx),
-	[3] = offsetof(struct pt_regs, cx),
-	[4] = offsetof(struct pt_regs, r8),
-	[5] = offsetof(struct pt_regs, r9)
-#endif
-};
-
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index 2f355d229a58..99bfc025111d 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -140,27 +140,3 @@ void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock,
 
 	set_normalized_timespec(ts, now.tv_sec, now.tv_nsec);
 }
-
-#ifdef CONFIG_X86_64
-/*
- * Initialize the generic pvclock vsyscall state.  This will allocate
- * a/some page(s) for the per-vcpu pvclock information, set up a
- * fixmap mapping for the page(s)
- */
-
-int __init pvclock_init_vsyscall(struct pvclock_vsyscall_time_info *i,
-				 int size)
-{
-	int idx;
-
-	WARN_ON (size != PVCLOCK_VSYSCALL_NR_PAGES*PAGE_SIZE);
-
-	for (idx = 0; idx <= (PVCLOCK_FIXMAP_END-PVCLOCK_FIXMAP_BEGIN); idx++) {
-		__set_fixmap(PVCLOCK_FIXMAP_BEGIN + idx,
-			     __pa(i) + (idx*PAGE_SIZE),
-			     PAGE_KERNEL_VVAR);
-	}
-
-	return 0;
-}
-#endif
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 02693dd9a079..ab0adc0fa5db 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -182,6 +182,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
 		},
 	},
+	{	/* Handle problems with rebooting on the iMac10,1. */
+		.callback = set_pci_reboot,
+		.ident = "Apple iMac10,1",
+		.matches = {
+		    DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+		    DMI_MATCH(DMI_PRODUCT_NAME, "iMac10,1"),
+		},
+	},
 
 	/* ASRock */
 	{	/* Handle problems with rebooting on ASRock Q1900DC-ITX */
@@ -718,6 +726,7 @@ static int crashing_cpu;
 static nmi_shootdown_cb shootdown_callback;
 
 static atomic_t waiting_for_crash_ipi;
+static int crash_ipi_issued;
 
 static int crash_nmi_callback(unsigned int val, struct pt_regs *regs)
 {
@@ -780,6 +789,9 @@ void nmi_shootdown_cpus(nmi_shootdown_cb callback)
 
 	smp_send_nmi_allbutself();
 
+	/* Kick CPUs looping in NMI context. */
+	WRITE_ONCE(crash_ipi_issued, 1);
+
 	msecs = 1000; /* Wait at most a second for the other cpus to stop */
 	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
 		mdelay(1);
@@ -788,9 +800,35 @@ void nmi_shootdown_cpus(nmi_shootdown_cb callback)
 
 	/* Leave the nmi callback set */
 }
+
+/*
+ * Check if the crash dumping IPI got issued and if so, call its callback
+ * directly. This function is used when we have already been in NMI handler.
+ * It doesn't return.
+ */
+void run_crash_ipi_callback(struct pt_regs *regs)
+{
+	if (crash_ipi_issued)
+		crash_nmi_callback(0, regs);
+}
+
+/* Override the weak function in kernel/panic.c */
+void nmi_panic_self_stop(struct pt_regs *regs)
+{
+	while (1) {
+		/* If no CPU is preparing crash dump, we simply loop here. */
+		run_crash_ipi_callback(regs);
+		cpu_relax();
+	}
+}
+
 #else /* !CONFIG_SMP */
 void nmi_shootdown_cpus(nmi_shootdown_cb callback)
 {
 	/* No other CPUs to shoot down */
 }
+
+void run_crash_ipi_callback(struct pt_regs *regs)
+{
+}
 #endif
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index cd9685235df9..4af8d063fb36 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -200,6 +200,9 @@ static __init int add_rtc_cmos(void)
 	}
 #endif
 
+	if (paravirt_enabled() && !paravirt_has(RTC))
+		return -ENODEV;
+
 	platform_device_register(&rtc_device);
 	dev_info(&rtc_device.dev,
 		 "registered platform RTC device (no PNP device found)\n");
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index a1e4da98c8f0..2367ae07eb76 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -112,6 +112,7 @@
 #include <asm/alternative.h>
 #include <asm/prom.h>
 #include <asm/microcode.h>
+#include <asm/mmu_context.h>
 
 /*
  * max_low_pfn_mapped: highest direct mapped pfn under 4GB
@@ -152,21 +153,21 @@ static struct resource data_resource = {
 	.name	= "Kernel data",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource code_resource = {
 	.name	= "Kernel code",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 static struct resource bss_resource = {
 	.name	= "Kernel bss",
 	.start	= 0,
 	.end	= 0,
-	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
+	.flags	= IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM
 };
 
 
@@ -1048,6 +1049,8 @@ void __init setup_arch(char **cmdline_p)
 	if (mtrr_trim_uncached_memory(max_pfn))
 		max_pfn = e820_end_of_ram_pfn();
 
+	max_possible_pfn = max_pfn;
+
 #ifdef CONFIG_X86_32
 	/* max_low_pfn get updated here */
 	find_low_pfn_range();
@@ -1188,7 +1191,7 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	clone_pgd_range(initial_page_table,
 			swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
-			KERNEL_PGD_PTRS);
+			min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
 #endif
 
 	tboot_probe();
@@ -1250,8 +1253,6 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled(EFI_BOOT))
 		efi_apply_memmap_quirks();
 #endif
-
-	microcode_init();
 }
 
 #ifdef CONFIG_X86_32
@@ -1282,3 +1283,11 @@ static int __init register_kernel_offset_dumper(void)
 	return 0;
 }
 __initcall(register_kernel_offset_dumper);
+
+void arch_show_smap(struct seq_file *m, struct vm_area_struct *vma)
+{
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return;
+
+	seq_printf(m, "ProtectionKey:  %8u\n", vma_pkey(vma));
+}
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index b7ffb7c00075..548ddf7d6fd2 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -61,7 +61,38 @@
 	regs->seg = GET_SEG(seg) | 3;			\
 } while (0)
 
-int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+#ifdef CONFIG_X86_64
+/*
+ * If regs->ss will cause an IRET fault, change it.  Otherwise leave it
+ * alone.  Using this generally makes no sense unless
+ * user_64bit_mode(regs) would return true.
+ */
+static void force_valid_ss(struct pt_regs *regs)
+{
+	u32 ar;
+	asm volatile ("lar %[old_ss], %[ar]\n\t"
+		      "jz 1f\n\t"		/* If invalid: */
+		      "xorl %[ar], %[ar]\n\t"	/* set ar = 0 */
+		      "1:"
+		      : [ar] "=r" (ar)
+		      : [old_ss] "rm" ((u16)regs->ss));
+
+	/*
+	 * For a valid 64-bit user context, we need DPL 3, type
+	 * read-write data or read-write exp-down data, and S and P
+	 * set.  We can't use VERW because VERW doesn't check the
+	 * P bit.
+	 */
+	ar &= AR_DPL_MASK | AR_S | AR_P | AR_TYPE_MASK;
+	if (ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA) &&
+	    ar != (AR_DPL3 | AR_S | AR_P | AR_TYPE_RWDATA_EXPDOWN))
+		regs->ss = __USER_DS;
+}
+#endif
+
+static int restore_sigcontext(struct pt_regs *regs,
+			      struct sigcontext __user *sc,
+			      unsigned long uc_flags)
 {
 	unsigned long buf_val;
 	void __user *buf;
@@ -94,15 +125,18 @@ int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		COPY(r15);
 #endif /* CONFIG_X86_64 */
 
-#ifdef CONFIG_X86_32
 		COPY_SEG_CPL3(cs);
 		COPY_SEG_CPL3(ss);
-#else /* !CONFIG_X86_32 */
-		/* Kernel saves and restores only the CS segment register on signals,
-		 * which is the bare minimum needed to allow mixed 32/64-bit code.
-		 * App's signal handler can save/restore other segments if needed. */
-		COPY_SEG_CPL3(cs);
-#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_X86_64
+		/*
+		 * Fix up SS if needed for the benefit of old DOSEMU and
+		 * CRIU.
+		 */
+		if (unlikely(!(uc_flags & UC_STRICT_RESTORE_SS) &&
+			     user_64bit_mode(regs)))
+			force_valid_ss(regs);
+#endif
 
 		get_user_ex(tmpflags, &sc->flags);
 		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
@@ -165,6 +199,7 @@ int setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate,
 		put_user_ex(regs->cs, &sc->cs);
 		put_user_ex(0, &sc->gs);
 		put_user_ex(0, &sc->fs);
+		put_user_ex(regs->ss, &sc->ss);
 #endif /* CONFIG_X86_32 */
 
 		put_user_ex(fpstate, &sc->fpstate);
@@ -403,6 +438,21 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
 	return 0;
 }
 #else /* !CONFIG_X86_32 */
+static unsigned long frame_uc_flags(struct pt_regs *regs)
+{
+	unsigned long flags;
+
+	if (cpu_has_xsave)
+		flags = UC_FP_XSTATE | UC_SIGCONTEXT_SS;
+	else
+		flags = UC_SIGCONTEXT_SS;
+
+	if (likely(user_64bit_mode(regs)))
+		flags |= UC_STRICT_RESTORE_SS;
+
+	return flags;
+}
+
 static int __setup_rt_frame(int sig, struct ksignal *ksig,
 			    sigset_t *set, struct pt_regs *regs)
 {
@@ -422,10 +472,7 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
 
 	put_user_try {
 		/* Create the ucontext.  */
-		if (cpu_has_xsave)
-			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
-		else
-			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(frame_uc_flags(regs), &frame->uc.uc_flags);
 		put_user_ex(0, &frame->uc.uc_link);
 		save_altstack_ex(&frame->uc.uc_stack, regs->sp);
 
@@ -459,10 +506,28 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig,
 
 	regs->sp = (unsigned long)frame;
 
-	/* Set up the CS register to run signal handlers in 64-bit mode,
-	   even if the handler happens to be interrupting 32-bit code. */
+	/*
+	 * Set up the CS and SS registers to run signal handlers in
+	 * 64-bit mode, even if the handler happens to be interrupting
+	 * 32-bit or 16-bit code.
+	 *
+	 * SS is subtle.  In 64-bit mode, we don't need any particular
+	 * SS descriptor, but we do need SS to be valid.  It's possible
+	 * that the old SS is entirely bogus -- this can happen if the
+	 * signal we're trying to deliver is #GP or #SS caused by a bad
+	 * SS value.  We also have a compatbility issue here: DOSEMU
+	 * relies on the contents of the SS register indicating the
+	 * SS value at the time of the signal, even though that code in
+	 * DOSEMU predates sigreturn's ability to restore SS.  (DOSEMU
+	 * avoids relying on sigreturn to restore SS; instead it uses
+	 * a trampoline.)  So we do our best: if the old SS was valid,
+	 * we keep it.  Otherwise we replace it.
+	 */
 	regs->cs = __USER_CS;
 
+	if (unlikely(regs->ss != __USER_DS))
+		force_valid_ss(regs);
+
 	return 0;
 }
 #endif /* CONFIG_X86_32 */
@@ -489,10 +554,7 @@ static int x32_setup_rt_frame(struct ksignal *ksig,
 
 	put_user_try {
 		/* Create the ucontext.  */
-		if (cpu_has_xsave)
-			put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
-		else
-			put_user_ex(0, &frame->uc.uc_flags);
+		put_user_ex(frame_uc_flags(regs), &frame->uc.uc_flags);
 		put_user_ex(0, &frame->uc.uc_link);
 		compat_save_altstack_ex(&frame->uc.uc_stack, regs->sp);
 		put_user_ex(0, &frame->uc.uc__pad0);
@@ -554,7 +616,11 @@ asmlinkage unsigned long sys_sigreturn(void)
 
 	set_current_blocked(&set);
 
-	if (restore_sigcontext(regs, &frame->sc))
+	/*
+	 * x86_32 has no uc_flags bits relevant to restore_sigcontext.
+	 * Save a few cycles by skipping the __get_user.
+	 */
+	if (restore_sigcontext(regs, &frame->sc, 0))
 		goto badframe;
 	return regs->ax;
 
@@ -570,16 +636,19 @@ asmlinkage long sys_rt_sigreturn(void)
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe __user *frame;
 	sigset_t set;
+	unsigned long uc_flags;
 
 	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
+	if (__get_user(uc_flags, &frame->uc.uc_flags))
+		goto badframe;
 
 	set_current_blocked(&set);
 
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
 		goto badframe;
 
 	if (restore_altstack(&frame->uc.uc_stack))
@@ -690,12 +759,18 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	signal_setup_done(failed, ksig, stepping);
 }
 
-#ifdef CONFIG_X86_32
-#define NR_restart_syscall	__NR_restart_syscall
-#else /* !CONFIG_X86_32 */
-#define NR_restart_syscall	\
-	test_thread_flag(TIF_IA32) ? __NR_ia32_restart_syscall : __NR_restart_syscall
-#endif /* CONFIG_X86_32 */
+static inline unsigned long get_nr_restart_syscall(const struct pt_regs *regs)
+{
+#ifdef CONFIG_X86_64
+	if (is_ia32_task())
+		return __NR_ia32_restart_syscall;
+#endif
+#ifdef CONFIG_X86_X32_ABI
+	return __NR_restart_syscall | (regs->orig_ax & __X32_SYSCALL_BIT);
+#else
+	return __NR_restart_syscall;
+#endif
+}
 
 /*
  * Note that 'init' is a special process: it doesn't get signals it doesn't
@@ -724,7 +799,7 @@ void do_signal(struct pt_regs *regs)
 			break;
 
 		case -ERESTART_RESTARTBLOCK:
-			regs->ax = NR_restart_syscall;
+			regs->ax = get_nr_restart_syscall(regs);
 			regs->ip -= 2;
 			break;
 		}
@@ -760,6 +835,7 @@ asmlinkage long sys32_x32_rt_sigreturn(void)
 	struct pt_regs *regs = current_pt_regs();
 	struct rt_sigframe_x32 __user *frame;
 	sigset_t set;
+	unsigned long uc_flags;
 
 	frame = (struct rt_sigframe_x32 __user *)(regs->sp - 8);
 
@@ -767,10 +843,12 @@ asmlinkage long sys32_x32_rt_sigreturn(void)
 		goto badframe;
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
+	if (__get_user(uc_flags, &frame->uc.uc_flags))
+		goto badframe;
 
 	set_current_blocked(&set);
 
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
 		goto badframe;
 
 	if (compat_restore_altstack(&frame->uc.uc_stack))
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 12c8286206ce..658777cf3851 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -125,12 +125,12 @@ static void native_smp_send_reschedule(int cpu)
 		WARN_ON(1);
 		return;
 	}
-	apic->send_IPI_mask(cpumask_of(cpu), RESCHEDULE_VECTOR);
+	apic->send_IPI(cpu, RESCHEDULE_VECTOR);
 }
 
 void native_send_call_func_single_ipi(int cpu)
 {
-	apic->send_IPI_mask(cpumask_of(cpu), CALL_FUNCTION_SINGLE_VECTOR);
+	apic->send_IPI(cpu, CALL_FUNCTION_SINGLE_VECTOR);
 }
 
 void native_send_call_func_ipi(const struct cpumask *mask)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 892ee2e5ecbc..a2065d3b3b39 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -97,6 +97,14 @@ DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_llc_shared_map);
 DEFINE_PER_CPU_READ_MOSTLY(struct cpuinfo_x86, cpu_info);
 EXPORT_PER_CPU_SYMBOL(cpu_info);
 
+/* Logical package management. We might want to allocate that dynamically */
+static int *physical_to_logical_pkg __read_mostly;
+static unsigned long *physical_package_map __read_mostly;;
+static unsigned long *logical_package_map  __read_mostly;
+static unsigned int max_physical_pkg_id __read_mostly;
+unsigned int __max_logical_packages __read_mostly;
+EXPORT_SYMBOL(__max_logical_packages);
+
 static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
 {
 	unsigned long flags;
@@ -248,7 +256,111 @@ static void notrace start_secondary(void *unused)
 	x86_cpuinit.setup_percpu_clockev();
 
 	wmb();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
+}
+
+int topology_update_package_map(unsigned int apicid, unsigned int cpu)
+{
+	unsigned int new, pkg = apicid >> boot_cpu_data.x86_coreid_bits;
+
+	/* Called from early boot ? */
+	if (!physical_package_map)
+		return 0;
+
+	if (pkg >= max_physical_pkg_id)
+		return -EINVAL;
+
+	/* Set the logical package id */
+	if (test_and_set_bit(pkg, physical_package_map))
+		goto found;
+
+	new = find_first_zero_bit(logical_package_map, __max_logical_packages);
+	if (new >= __max_logical_packages) {
+		physical_to_logical_pkg[pkg] = -1;
+		pr_warn("APIC(%x) Package %u exceeds logical package map\n",
+			apicid, pkg);
+		return -ENOSPC;
+	}
+	set_bit(new, logical_package_map);
+	pr_info("APIC(%x) Converting physical %u to logical package %u\n",
+		apicid, pkg, new);
+	physical_to_logical_pkg[pkg] = new;
+
+found:
+	cpu_data(cpu).logical_proc_id = physical_to_logical_pkg[pkg];
+	return 0;
+}
+
+/**
+ * topology_phys_to_logical_pkg - Map a physical package id to a logical
+ *
+ * Returns logical package id or -1 if not found
+ */
+int topology_phys_to_logical_pkg(unsigned int phys_pkg)
+{
+	if (phys_pkg >= max_physical_pkg_id)
+		return -1;
+	return physical_to_logical_pkg[phys_pkg];
+}
+EXPORT_SYMBOL(topology_phys_to_logical_pkg);
+
+static void __init smp_init_package_map(void)
+{
+	unsigned int ncpus, cpu;
+	size_t size;
+
+	/*
+	 * Today neither Intel nor AMD support heterogenous systems. That
+	 * might change in the future....
+	 *
+	 * While ideally we'd want '* smp_num_siblings' in the below @ncpus
+	 * computation, this won't actually work since some Intel BIOSes
+	 * report inconsistent HT data when they disable HT.
+	 *
+	 * In particular, they reduce the APIC-IDs to only include the cores,
+	 * but leave the CPUID topology to say there are (2) siblings.
+	 * This means we don't know how many threads there will be until
+	 * after the APIC enumeration.
+	 *
+	 * By not including this we'll sometimes over-estimate the number of
+	 * logical packages by the amount of !present siblings, but this is
+	 * still better than MAX_LOCAL_APIC.
+	 *
+	 * We use total_cpus not nr_cpu_ids because nr_cpu_ids can be limited
+	 * on the command line leading to a similar issue as the HT disable
+	 * problem because the hyperthreads are usually enumerated after the
+	 * primary cores.
+	 */
+	ncpus = boot_cpu_data.x86_max_cores;
+	__max_logical_packages = DIV_ROUND_UP(total_cpus, ncpus);
+
+	/*
+	 * Possibly larger than what we need as the number of apic ids per
+	 * package can be smaller than the actual used apic ids.
+	 */
+	max_physical_pkg_id = DIV_ROUND_UP(MAX_LOCAL_APIC, ncpus);
+	size = max_physical_pkg_id * sizeof(unsigned int);
+	physical_to_logical_pkg = kmalloc(size, GFP_KERNEL);
+	memset(physical_to_logical_pkg, 0xff, size);
+	size = BITS_TO_LONGS(max_physical_pkg_id) * sizeof(unsigned long);
+	physical_package_map = kzalloc(size, GFP_KERNEL);
+	size = BITS_TO_LONGS(__max_logical_packages) * sizeof(unsigned long);
+	logical_package_map = kzalloc(size, GFP_KERNEL);
+
+	pr_info("Max logical packages: %u\n", __max_logical_packages);
+
+	for_each_present_cpu(cpu) {
+		unsigned int apicid = apic->cpu_present_to_apicid(cpu);
+
+		if (apicid == BAD_APICID || !apic->apic_id_valid(apicid))
+			continue;
+		if (!topology_update_package_map(apicid, cpu))
+			continue;
+		pr_warn("CPU %u APICId %x disabled\n", cpu, apicid);
+		per_cpu(x86_bios_cpu_apicid, cpu) = BAD_APICID;
+		set_cpu_possible(cpu, false);
+		set_cpu_present(cpu, false);
+	}
 }
 
 void __init smp_store_boot_cpu_info(void)
@@ -258,6 +370,7 @@ void __init smp_store_boot_cpu_info(void)
 
 	*c = boot_cpu_data;
 	c->cpu_index = id;
+	smp_init_package_map();
 }
 
 /*
@@ -304,12 +417,12 @@ do {									\
 
 static bool match_smt(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 {
-	if (cpu_has_topoext) {
+	if (boot_cpu_has(X86_FEATURE_TOPOEXT)) {
 		int cpu1 = c->cpu_index, cpu2 = o->cpu_index;
 
 		if (c->phys_proc_id == o->phys_proc_id &&
 		    per_cpu(cpu_llc_id, cpu1) == per_cpu(cpu_llc_id, cpu2) &&
-		    c->compute_unit_id == o->compute_unit_id)
+		    c->cpu_core_id == o->cpu_core_id)
 			return topology_sane(c, o, "smt");
 
 	} else if (c->phys_proc_id == o->phys_proc_id &&
@@ -509,7 +622,7 @@ void __inquire_remote_apic(int apicid)
  */
 #define UDELAY_10MS_DEFAULT 10000
 
-static unsigned int init_udelay = INT_MAX;
+static unsigned int init_udelay = UINT_MAX;
 
 static int __init cpu_init_udelay(char *str)
 {
@@ -522,14 +635,15 @@ early_param("cpu_init_udelay", cpu_init_udelay);
 static void __init smp_quirk_init_udelay(void)
 {
 	/* if cmdline changed it from default, leave it alone */
-	if (init_udelay != INT_MAX)
+	if (init_udelay != UINT_MAX)
 		return;
 
 	/* if modern processor, use no delay */
 	if (((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 6)) ||
-	    ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF)))
+	    ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && (boot_cpu_data.x86 >= 0xF))) {
 		init_udelay = 0;
-
+		return;
+	}
 	/* else, use legacy delay */
 	init_udelay = UDELAY_10MS_DEFAULT;
 }
@@ -629,13 +743,6 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 		num_starts = 0;
 
 	/*
-	 * Paravirt / VMI wants a startup IPI hook here to set up the
-	 * target processor state.
-	 */
-	startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
-			 stack_start);
-
-	/*
 	 * Run STARTUP IPI loop.
 	 */
 	pr_debug("#startup loops: %d\n", num_starts);
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index fdd0c6430e5a..9ee98eefc44d 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -14,30 +14,34 @@ static int save_stack_stack(void *data, char *name)
 	return 0;
 }
 
-static void
+static int
 __save_stack_address(void *data, unsigned long addr, bool reliable, bool nosched)
 {
 	struct stack_trace *trace = data;
 #ifdef CONFIG_FRAME_POINTER
 	if (!reliable)
-		return;
+		return 0;
 #endif
 	if (nosched && in_sched_functions(addr))
-		return;
+		return 0;
 	if (trace->skip > 0) {
 		trace->skip--;
-		return;
+		return 0;
 	}
-	if (trace->nr_entries < trace->max_entries)
+	if (trace->nr_entries < trace->max_entries) {
 		trace->entries[trace->nr_entries++] = addr;
+		return 0;
+	} else {
+		return -1; /* no more room, stop walking the stack */
+	}
 }
 
-static void save_stack_address(void *data, unsigned long addr, int reliable)
+static int save_stack_address(void *data, unsigned long addr, int reliable)
 {
 	return __save_stack_address(data, addr, reliable, false);
 }
 
-static void
+static int
 save_stack_address_nosched(void *data, unsigned long addr, int reliable)
 {
 	return __save_stack_address(data, addr, reliable, true);
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 91a4496db434..e72a07f20b05 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -135,7 +135,7 @@ static int map_tboot_page(unsigned long vaddr, unsigned long pfn,
 	pmd = pmd_alloc(&tboot_mm, pud, vaddr);
 	if (!pmd)
 		return -1;
-	pte = pte_alloc_map(&tboot_mm, NULL, pmd, vaddr);
+	pte = pte_alloc_map(&tboot_mm, pmd, vaddr);
 	if (!pte)
 		return -1;
 	set_pte_at(&tboot_mm, vaddr, pte, pfn_pte(pfn, prot));
diff --git a/arch/x86/kernel/test_nx.c b/arch/x86/kernel/test_nx.c
index 3f92ce07e525..27538f183c3b 100644
--- a/arch/x86/kernel/test_nx.c
+++ b/arch/x86/kernel/test_nx.c
@@ -142,7 +142,6 @@ static int test_NX(void)
 	 * by the error message
 	 */
 
-#ifdef CONFIG_DEBUG_RODATA
 	/* Test 3: Check if the .rodata section is executable */
 	if (rodata_test_data != 0xC3) {
 		printk(KERN_ERR "test_nx: .rodata marker has invalid value\n");
@@ -151,7 +150,6 @@ static int test_NX(void)
 		printk(KERN_ERR "test_nx: .rodata section is executable\n");
 		ret = -ENODEV;
 	}
-#endif
 
 #if 0
 	/* Test 4: Check if the .data section of a module is executable */
diff --git a/arch/x86/kernel/test_rodata.c b/arch/x86/kernel/test_rodata.c
index 5ecbfe5099da..cb4a01b41e27 100644
--- a/arch/x86/kernel/test_rodata.c
+++ b/arch/x86/kernel/test_rodata.c
@@ -76,5 +76,5 @@ int rodata_test(void)
 }
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Testcase for the DEBUG_RODATA infrastructure");
+MODULE_DESCRIPTION("Testcase for marking rodata as read-only");
 MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index ade185a46b1d..06cbe25861f1 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -83,30 +83,16 @@ gate_desc idt_table[NR_VECTORS] __page_aligned_bss;
 DECLARE_BITMAP(used_vectors, NR_VECTORS);
 EXPORT_SYMBOL_GPL(used_vectors);
 
-static inline void conditional_sti(struct pt_regs *regs)
+static inline void cond_local_irq_enable(struct pt_regs *regs)
 {
 	if (regs->flags & X86_EFLAGS_IF)
 		local_irq_enable();
 }
 
-static inline void preempt_conditional_sti(struct pt_regs *regs)
-{
-	preempt_count_inc();
-	if (regs->flags & X86_EFLAGS_IF)
-		local_irq_enable();
-}
-
-static inline void conditional_cli(struct pt_regs *regs)
-{
-	if (regs->flags & X86_EFLAGS_IF)
-		local_irq_disable();
-}
-
-static inline void preempt_conditional_cli(struct pt_regs *regs)
+static inline void cond_local_irq_disable(struct pt_regs *regs)
 {
 	if (regs->flags & X86_EFLAGS_IF)
 		local_irq_disable();
-	preempt_count_dec();
 }
 
 void ist_enter(struct pt_regs *regs)
@@ -199,7 +185,7 @@ do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
 	}
 
 	if (!user_mode(regs)) {
-		if (!fixup_exception(regs)) {
+		if (!fixup_exception(regs, trapnr)) {
 			tsk->thread.error_code = error_code;
 			tsk->thread.trap_nr = trapnr;
 			die(str, regs, error_code);
@@ -262,7 +248,6 @@ do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
 	tsk->thread.error_code = error_code;
 	tsk->thread.trap_nr = trapnr;
 
-#ifdef CONFIG_X86_64
 	if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
 	    printk_ratelimit()) {
 		pr_info("%s[%d] trap %s ip:%lx sp:%lx error:%lx",
@@ -271,7 +256,6 @@ do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
 		print_vma_addr(" in ", regs->ip);
 		pr_cont("\n");
 	}
-#endif
 
 	force_sig_info(signr, info ?: SEND_SIG_PRIV, tsk);
 }
@@ -286,7 +270,7 @@ static void do_error_trap(struct pt_regs *regs, long error_code, char *str,
 
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) !=
 			NOTIFY_STOP) {
-		conditional_sti(regs);
+		cond_local_irq_enable(regs);
 		do_trap(trapnr, signr, str, regs, error_code,
 			fill_trap_info(regs, signr, trapnr, &info));
 	}
@@ -368,7 +352,7 @@ dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 	if (notify_die(DIE_TRAP, "bounds", regs, error_code,
 			X86_TRAP_BR, SIGSEGV) == NOTIFY_STOP)
 		return;
-	conditional_sti(regs);
+	cond_local_irq_enable(regs);
 
 	if (!user_mode(regs))
 		die("bounds", regs, error_code);
@@ -443,7 +427,7 @@ do_general_protection(struct pt_regs *regs, long error_code)
 	struct task_struct *tsk;
 
 	RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
-	conditional_sti(regs);
+	cond_local_irq_enable(regs);
 
 	if (v8086_mode(regs)) {
 		local_irq_enable();
@@ -453,7 +437,7 @@ do_general_protection(struct pt_regs *regs, long error_code)
 
 	tsk = current;
 	if (!user_mode(regs)) {
-		if (fixup_exception(regs))
+		if (fixup_exception(regs, X86_TRAP_GP))
 			return;
 
 		tsk->thread.error_code = error_code;
@@ -517,9 +501,11 @@ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
 	 * as we may switch to the interrupt stack.
 	 */
 	debug_stack_usage_inc();
-	preempt_conditional_sti(regs);
+	preempt_disable();
+	cond_local_irq_enable(regs);
 	do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, NULL);
-	preempt_conditional_cli(regs);
+	cond_local_irq_disable(regs);
+	preempt_enable_no_resched();
 	debug_stack_usage_dec();
 exit:
 	ist_exit(regs);
@@ -571,6 +557,29 @@ struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
 NOKPROBE_SYMBOL(fixup_bad_iret);
 #endif
 
+static bool is_sysenter_singlestep(struct pt_regs *regs)
+{
+	/*
+	 * We don't try for precision here.  If we're anywhere in the region of
+	 * code that can be single-stepped in the SYSENTER entry path, then
+	 * assume that this is a useless single-step trap due to SYSENTER
+	 * being invoked with TF set.  (We don't know in advance exactly
+	 * which instructions will be hit because BTF could plausibly
+	 * be set.)
+	 */
+#ifdef CONFIG_X86_32
+	return (regs->ip - (unsigned long)__begin_SYSENTER_singlestep_region) <
+		(unsigned long)__end_SYSENTER_singlestep_region -
+		(unsigned long)__begin_SYSENTER_singlestep_region;
+#elif defined(CONFIG_IA32_EMULATION)
+	return (regs->ip - (unsigned long)entry_SYSENTER_compat) <
+		(unsigned long)__end_entry_SYSENTER_compat -
+		(unsigned long)entry_SYSENTER_compat;
+#else
+	return false;
+#endif
+}
+
 /*
  * Our handling of the processor debug registers is non-trivial.
  * We do not clear them on entry and exit from the kernel. Therefore
@@ -605,11 +614,42 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
 	ist_enter(regs);
 
 	get_debugreg(dr6, 6);
+	/*
+	 * The Intel SDM says:
+	 *
+	 *   Certain debug exceptions may clear bits 0-3. The remaining
+	 *   contents of the DR6 register are never cleared by the
+	 *   processor. To avoid confusion in identifying debug
+	 *   exceptions, debug handlers should clear the register before
+	 *   returning to the interrupted task.
+	 *
+	 * Keep it simple: clear DR6 immediately.
+	 */
+	set_debugreg(0, 6);
 
 	/* Filter out all the reserved bits which are preset to 1 */
 	dr6 &= ~DR6_RESERVED;
 
 	/*
+	 * The SDM says "The processor clears the BTF flag when it
+	 * generates a debug exception."  Clear TIF_BLOCKSTEP to keep
+	 * TIF_BLOCKSTEP in sync with the hardware BTF flag.
+	 */
+	clear_tsk_thread_flag(tsk, TIF_BLOCKSTEP);
+
+	if (unlikely(!user_mode(regs) && (dr6 & DR_STEP) &&
+		     is_sysenter_singlestep(regs))) {
+		dr6 &= ~DR_STEP;
+		if (!dr6)
+			goto exit;
+		/*
+		 * else we might have gotten a single-step trap and hit a
+		 * watchpoint at the same time, in which case we should fall
+		 * through and handle the watchpoint.
+		 */
+	}
+
+	/*
 	 * If dr6 has no reason to give us about the origin of this trap,
 	 * then it's very likely the result of an icebp/int01 trap.
 	 * User wants a sigtrap for that.
@@ -617,18 +657,10 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
 	if (!dr6 && user_mode(regs))
 		user_icebp = 1;
 
-	/* Catch kmemcheck conditions first of all! */
+	/* Catch kmemcheck conditions! */
 	if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
 		goto exit;
 
-	/* DR6 may or may not be cleared by the CPU */
-	set_debugreg(0, 6);
-
-	/*
-	 * The processor cleared BTF, so don't mark that we need it set.
-	 */
-	clear_tsk_thread_flag(tsk, TIF_BLOCKSTEP);
-
 	/* Store the virtualized DR6 value */
 	tsk->thread.debugreg6 = dr6;
 
@@ -648,24 +680,25 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
 	debug_stack_usage_inc();
 
 	/* It's safe to allow irq's after DR6 has been saved */
-	preempt_conditional_sti(regs);
+	preempt_disable();
+	cond_local_irq_enable(regs);
 
 	if (v8086_mode(regs)) {
 		handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code,
 					X86_TRAP_DB);
-		preempt_conditional_cli(regs);
+		cond_local_irq_disable(regs);
+		preempt_enable_no_resched();
 		debug_stack_usage_dec();
 		goto exit;
 	}
 
-	/*
-	 * Single-stepping through system calls: ignore any exceptions in
-	 * kernel space, but re-enable TF when returning to user mode.
-	 *
-	 * We already checked v86 mode above, so we can check for kernel mode
-	 * by just checking the CPL of CS.
-	 */
-	if ((dr6 & DR_STEP) && !user_mode(regs)) {
+	if (WARN_ON_ONCE((dr6 & DR_STEP) && !user_mode(regs))) {
+		/*
+		 * Historical junk that used to handle SYSENTER single-stepping.
+		 * This should be unreachable now.  If we survive for a while
+		 * without anyone hitting this warning, we'll turn this into
+		 * an oops.
+		 */
 		tsk->thread.debugreg6 &= ~DR_STEP;
 		set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
 		regs->flags &= ~X86_EFLAGS_TF;
@@ -673,10 +706,19 @@ dotraplinkage void do_debug(struct pt_regs *regs, long error_code)
 	si_code = get_si_code(tsk->thread.debugreg6);
 	if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS) || user_icebp)
 		send_sigtrap(tsk, regs, error_code, si_code);
-	preempt_conditional_cli(regs);
+	cond_local_irq_disable(regs);
+	preempt_enable_no_resched();
 	debug_stack_usage_dec();
 
 exit:
+#if defined(CONFIG_X86_32)
+	/*
+	 * This is the most likely code path that involves non-trivial use
+	 * of the SYSENTER stack.  Check that we haven't overrun it.
+	 */
+	WARN(this_cpu_read(cpu_tss.SYSENTER_stack_canary) != STACK_END_MAGIC,
+	     "Overran or corrupted SYSENTER stack\n");
+#endif
 	ist_exit(regs);
 }
 NOKPROBE_SYMBOL(do_debug);
@@ -696,10 +738,10 @@ static void math_error(struct pt_regs *regs, int error_code, int trapnr)
 
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, SIGFPE) == NOTIFY_STOP)
 		return;
-	conditional_sti(regs);
+	cond_local_irq_enable(regs);
 
 	if (!user_mode(regs)) {
-		if (!fixup_exception(regs)) {
+		if (!fixup_exception(regs, trapnr)) {
 			task->thread.error_code = error_code;
 			task->thread.trap_nr = trapnr;
 			die(str, regs, error_code);
@@ -743,20 +785,19 @@ do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
 dotraplinkage void
 do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
 {
-	conditional_sti(regs);
+	cond_local_irq_enable(regs);
 }
 
 dotraplinkage void
 do_device_not_available(struct pt_regs *regs, long error_code)
 {
 	RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
-	BUG_ON(use_eager_fpu());
 
 #ifdef CONFIG_MATH_EMULATION
-	if (read_cr0() & X86_CR0_EM) {
+	if (!boot_cpu_has(X86_FEATURE_FPU) && (read_cr0() & X86_CR0_EM)) {
 		struct math_emu_info info = { };
 
-		conditional_sti(regs);
+		cond_local_irq_enable(regs);
 
 		info.regs = regs;
 		math_emulate(&info);
@@ -765,7 +806,7 @@ do_device_not_available(struct pt_regs *regs, long error_code)
 #endif
 	fpu__restore(&current->thread.fpu); /* interrupts still off */
 #ifdef CONFIG_X86_32
-	conditional_sti(regs);
+	cond_local_irq_enable(regs);
 #endif
 }
 NOKPROBE_SYMBOL(do_device_not_available);
@@ -868,7 +909,7 @@ void __init trap_init(void)
 #endif
 
 #ifdef CONFIG_X86_32
-	set_system_trap_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
+	set_system_intr_gate(IA32_SYSCALL_VECTOR, entry_INT80_32);
 	set_bit(IA32_SYSCALL_VECTOR, used_vectors);
 #endif
 
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index c7c4d9c51e99..c9c4c7ce3eb2 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -43,6 +43,11 @@ static DEFINE_STATIC_KEY_FALSE(__use_tsc);
 
 int tsc_clocksource_reliable;
 
+static u32 art_to_tsc_numerator;
+static u32 art_to_tsc_denominator;
+static u64 art_to_tsc_offset;
+struct clocksource *art_related_clocksource;
+
 /*
  * Use a ring-buffer like data structure, where a writer advances the head by
  * writing a new data entry and a reader advances the tail when it observes a
@@ -876,7 +881,7 @@ void tsc_restore_sched_clock_state(void)
 	local_irq_save(flags);
 
 	/*
-	 * We're comming out of suspend, there's no concurrency yet; don't
+	 * We're coming out of suspend, there's no concurrency yet; don't
 	 * bother being nice about the RCU stuff, just write to both
 	 * data fields.
 	 */
@@ -964,6 +969,37 @@ core_initcall(cpufreq_tsc);
 
 #endif /* CONFIG_CPU_FREQ */
 
+#define ART_CPUID_LEAF (0x15)
+#define ART_MIN_DENOMINATOR (1)
+
+
+/*
+ * If ART is present detect the numerator:denominator to convert to TSC
+ */
+static void detect_art(void)
+{
+	unsigned int unused[2];
+
+	if (boot_cpu_data.cpuid_level < ART_CPUID_LEAF)
+		return;
+
+	cpuid(ART_CPUID_LEAF, &art_to_tsc_denominator,
+	      &art_to_tsc_numerator, unused, unused+1);
+
+	/* Don't enable ART in a VM, non-stop TSC required */
+	if (boot_cpu_has(X86_FEATURE_HYPERVISOR) ||
+	    !boot_cpu_has(X86_FEATURE_NONSTOP_TSC) ||
+	    art_to_tsc_denominator < ART_MIN_DENOMINATOR)
+		return;
+
+	if (rdmsrl_safe(MSR_IA32_TSC_ADJUST, &art_to_tsc_offset))
+		return;
+
+	/* Make this sticky over multiple CPU init calls */
+	setup_force_cpu_cap(X86_FEATURE_ART);
+}
+
+
 /* clocksource code */
 
 static struct clocksource clocksource_tsc;
@@ -1071,6 +1107,25 @@ int unsynchronized_tsc(void)
 	return 0;
 }
 
+/*
+ * Convert ART to TSC given numerator/denominator found in detect_art()
+ */
+struct system_counterval_t convert_art_to_tsc(cycle_t art)
+{
+	u64 tmp, res, rem;
+
+	rem = do_div(art, art_to_tsc_denominator);
+
+	res = art * art_to_tsc_numerator;
+	tmp = rem * art_to_tsc_numerator;
+
+	do_div(tmp, art_to_tsc_denominator);
+	res += tmp + art_to_tsc_offset;
+
+	return (struct system_counterval_t) {.cs = art_related_clocksource,
+			.cycles = res};
+}
+EXPORT_SYMBOL(convert_art_to_tsc);
 
 static void tsc_refine_calibration_work(struct work_struct *work);
 static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
@@ -1142,6 +1197,8 @@ static void tsc_refine_calibration_work(struct work_struct *work)
 		(unsigned long)tsc_khz % 1000);
 
 out:
+	if (boot_cpu_has(X86_FEATURE_ART))
+		art_related_clocksource = &clocksource_tsc;
 	clocksource_register_khz(&clocksource_tsc, tsc_khz);
 }
 
@@ -1185,8 +1242,6 @@ void __init tsc_init(void)
 	u64 lpj;
 	int cpu;
 
-	x86_init.timers.tsc_pre_init();
-
 	if (!cpu_has_tsc) {
 		setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
 		return;
@@ -1237,6 +1292,8 @@ void __init tsc_init(void)
 		mark_tsc_unstable("TSCs unsynchronized");
 
 	check_system_tsc_reliable();
+
+	detect_art();
 }
 
 #ifdef CONFIG_SMP
@@ -1248,14 +1305,18 @@ void __init tsc_init(void)
  */
 unsigned long calibrate_delay_is_known(void)
 {
-	int i, cpu = smp_processor_id();
+	int sibling, cpu = smp_processor_id();
+	struct cpumask *mask = topology_core_cpumask(cpu);
 
 	if (!tsc_disabled && !cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC))
 		return 0;
 
-	for_each_online_cpu(i)
-		if (cpu_data(i).phys_proc_id == cpu_data(cpu).phys_proc_id)
-			return cpu_data(i).loops_per_jiffy;
+	if (!mask)
+		return 0;
+
+	sibling = cpumask_any_but(mask, cpu);
+	if (sibling < nr_cpu_ids)
+		return cpu_data(sibling).loops_per_jiffy;
 	return 0;
 }
 #endif
diff --git a/arch/x86/kernel/verify_cpu.S b/arch/x86/kernel/verify_cpu.S
index b9242bacbe59..014ea59aa153 100644
--- a/arch/x86/kernel/verify_cpu.S
+++ b/arch/x86/kernel/verify_cpu.S
@@ -30,14 +30,15 @@
  * 	appropriately. Either display a message or halt.
  */
 
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/msr-index.h>
 
 verify_cpu:
-	pushfl				# Save caller passed flags
-	pushl	$0			# Kill any dangerous flags
-	popfl
+	pushf				# Save caller passed flags
+	push	$0			# Kill any dangerous flags
+	popf
 
+#ifndef __x86_64__
 	pushfl				# standard way to check for cpuid
 	popl	%eax
 	movl	%eax,%ebx
@@ -47,30 +48,31 @@ verify_cpu:
 	pushfl
 	popl	%eax
 	cmpl	%eax,%ebx
-	jz	verify_cpu_no_longmode	# cpu has no cpuid
+	jz	.Lverify_cpu_no_longmode	# cpu has no cpuid
+#endif
 
 	movl	$0x0,%eax		# See if cpuid 1 is implemented
 	cpuid
 	cmpl	$0x1,%eax
-	jb	verify_cpu_no_longmode	# no cpuid 1
+	jb	.Lverify_cpu_no_longmode	# no cpuid 1
 
 	xor	%di,%di
 	cmpl	$0x68747541,%ebx	# AuthenticAMD
-	jnz	verify_cpu_noamd
+	jnz	.Lverify_cpu_noamd
 	cmpl	$0x69746e65,%edx
-	jnz	verify_cpu_noamd
+	jnz	.Lverify_cpu_noamd
 	cmpl	$0x444d4163,%ecx
-	jnz	verify_cpu_noamd
+	jnz	.Lverify_cpu_noamd
 	mov	$1,%di			# cpu is from AMD
-	jmp	verify_cpu_check
+	jmp	.Lverify_cpu_check
 
-verify_cpu_noamd:
+.Lverify_cpu_noamd:
 	cmpl	$0x756e6547,%ebx        # GenuineIntel?
-	jnz	verify_cpu_check
+	jnz	.Lverify_cpu_check
 	cmpl	$0x49656e69,%edx
-	jnz	verify_cpu_check
+	jnz	.Lverify_cpu_check
 	cmpl	$0x6c65746e,%ecx
-	jnz	verify_cpu_check
+	jnz	.Lverify_cpu_check
 
 	# only call IA32_MISC_ENABLE when:
 	# family > 6 || (family == 6 && model >= 0xd)
@@ -81,59 +83,59 @@ verify_cpu_noamd:
 	andl	$0x0ff00f00, %eax	# mask family and extended family
 	shrl	$8, %eax
 	cmpl	$6, %eax
-	ja	verify_cpu_clear_xd	# family > 6, ok
-	jb	verify_cpu_check	# family < 6, skip
+	ja	.Lverify_cpu_clear_xd	# family > 6, ok
+	jb	.Lverify_cpu_check	# family < 6, skip
 
 	andl	$0x000f00f0, %ecx	# mask model and extended model
 	shrl	$4, %ecx
 	cmpl	$0xd, %ecx
-	jb	verify_cpu_check	# family == 6, model < 0xd, skip
+	jb	.Lverify_cpu_check	# family == 6, model < 0xd, skip
 
-verify_cpu_clear_xd:
+.Lverify_cpu_clear_xd:
 	movl	$MSR_IA32_MISC_ENABLE, %ecx
 	rdmsr
 	btrl	$2, %edx		# clear MSR_IA32_MISC_ENABLE_XD_DISABLE
-	jnc	verify_cpu_check	# only write MSR if bit was changed
+	jnc	.Lverify_cpu_check	# only write MSR if bit was changed
 	wrmsr
 
-verify_cpu_check:
+.Lverify_cpu_check:
 	movl    $0x1,%eax		# Does the cpu have what it takes
 	cpuid
 	andl	$REQUIRED_MASK0,%edx
 	xorl	$REQUIRED_MASK0,%edx
-	jnz	verify_cpu_no_longmode
+	jnz	.Lverify_cpu_no_longmode
 
 	movl    $0x80000000,%eax	# See if extended cpuid is implemented
 	cpuid
 	cmpl    $0x80000001,%eax
-	jb      verify_cpu_no_longmode	# no extended cpuid
+	jb      .Lverify_cpu_no_longmode	# no extended cpuid
 
 	movl    $0x80000001,%eax	# Does the cpu have what it takes
 	cpuid
 	andl    $REQUIRED_MASK1,%edx
 	xorl    $REQUIRED_MASK1,%edx
-	jnz     verify_cpu_no_longmode
+	jnz     .Lverify_cpu_no_longmode
 
-verify_cpu_sse_test:
+.Lverify_cpu_sse_test:
 	movl	$1,%eax
 	cpuid
 	andl	$SSE_MASK,%edx
 	cmpl	$SSE_MASK,%edx
-	je	verify_cpu_sse_ok
+	je	.Lverify_cpu_sse_ok
 	test	%di,%di
-	jz	verify_cpu_no_longmode	# only try to force SSE on AMD
+	jz	.Lverify_cpu_no_longmode	# only try to force SSE on AMD
 	movl	$MSR_K7_HWCR,%ecx
 	rdmsr
 	btr	$15,%eax		# enable SSE
 	wrmsr
 	xor	%di,%di			# don't loop
-	jmp	verify_cpu_sse_test	# try again
+	jmp	.Lverify_cpu_sse_test	# try again
 
-verify_cpu_no_longmode:
-	popfl				# Restore caller passed flags
+.Lverify_cpu_no_longmode:
+	popf				# Restore caller passed flags
 	movl $1,%eax
 	ret
-verify_cpu_sse_ok:
-	popfl				# Restore caller passed flags
+.Lverify_cpu_sse_ok:
+	popf				# Restore caller passed flags
 	xorl %eax, %eax
 	ret
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 524619351961..3dce1ca0a653 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -175,7 +175,11 @@ static void mark_screen_rdonly(struct mm_struct *mm)
 	if (pud_none_or_clear_bad(pud))
 		goto out;
 	pmd = pmd_offset(pud, 0xA0000);
-	split_huge_page_pmd_mm(mm, 0xA0000, pmd);
+
+	if (pmd_trans_huge(*pmd)) {
+		struct vm_area_struct *vma = find_vma(mm, 0xA0000);
+		split_huge_pmd(vma, pmd, 0xA0000);
+	}
 	if (pmd_none_or_clear_bad(pmd))
 		goto out;
 	pte = pte_offset_map_lock(mm, pmd, 0xA0000, &ptl);
@@ -357,8 +361,10 @@ static long do_sys_vm86(struct vm86plus_struct __user *user_vm86, bool plus)
 	tss = &per_cpu(cpu_tss, get_cpu());
 	/* make room for real-mode segments */
 	tsk->thread.sp0 += 16;
-	if (cpu_has_sep)
+
+	if (static_cpu_has(X86_FEATURE_SEP))
 		tsk->thread.sysenter_cs = 0;
+
 	load_sp0(tss, &tsk->thread);
 	put_cpu();
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 74e4bf11f562..4c941f88d405 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -41,29 +41,28 @@ ENTRY(phys_startup_64)
 jiffies_64 = jiffies;
 #endif
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+#if defined(CONFIG_X86_64)
 /*
- * On 64-bit, align RODATA to 2MB so that even with CONFIG_DEBUG_RODATA
- * we retain large page mappings for boundaries spanning kernel text, rodata
- * and data sections.
+ * On 64-bit, align RODATA to 2MB so we retain large page mappings for
+ * boundaries spanning kernel text, rodata and data sections.
  *
  * However, kernel identity mappings will have different RWX permissions
  * to the pages mapping to text and to the pages padding (which are freed) the
  * text section. Hence kernel identity mappings will be broken to smaller
  * pages. For 64-bit, kernel text and kernel identity mappings are different,
- * so we can enable protection checks that come with CONFIG_DEBUG_RODATA,
- * as well as retain 2MB large page mappings for kernel text.
+ * so we can enable protection checks as well as retain 2MB large page
+ * mappings for kernel text.
  */
-#define X64_ALIGN_DEBUG_RODATA_BEGIN	. = ALIGN(HPAGE_SIZE);
+#define X64_ALIGN_RODATA_BEGIN	. = ALIGN(HPAGE_SIZE);
 
-#define X64_ALIGN_DEBUG_RODATA_END				\
+#define X64_ALIGN_RODATA_END					\
 		. = ALIGN(HPAGE_SIZE);				\
 		__end_rodata_hpage_align = .;
 
 #else
 
-#define X64_ALIGN_DEBUG_RODATA_BEGIN
-#define X64_ALIGN_DEBUG_RODATA_END
+#define X64_ALIGN_RODATA_BEGIN
+#define X64_ALIGN_RODATA_END
 
 #endif
 
@@ -82,11 +81,11 @@ PHDRS {
 SECTIONS
 {
 #ifdef CONFIG_X86_32
-        . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
-        phys_startup_32 = startup_32 - LOAD_OFFSET;
+	. = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
+	phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET);
 #else
-        . = __START_KERNEL;
-        phys_startup_64 = startup_64 - LOAD_OFFSET;
+	. = __START_KERNEL;
+	phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET);
 #endif
 
 	/* Text and read-only data */
@@ -102,6 +101,7 @@ SECTIONS
 		KPROBES_TEXT
 		ENTRY_TEXT
 		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 		/* End of text section */
@@ -112,13 +112,11 @@ SECTIONS
 
 	EXCEPTION_TABLE(16) :text = 0x9090
 
-#if defined(CONFIG_DEBUG_RODATA)
 	/* .text should occupy whole number of pages */
 	. = ALIGN(PAGE_SIZE);
-#endif
-	X64_ALIGN_DEBUG_RODATA_BEGIN
+	X64_ALIGN_RODATA_BEGIN
 	RO_DATA(PAGE_SIZE)
-	X64_ALIGN_DEBUG_RODATA_END
+	X64_ALIGN_RODATA_END
 
 	/* Data */
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {
@@ -195,6 +193,17 @@ SECTIONS
 	:init
 #endif
 
+	/*
+	 * Section for code used exclusively before alternatives are run. All
+	 * references to such code must be patched out by alternatives, normally
+	 * by using X86_FEATURE_ALWAYS CPU feature bit.
+	 *
+	 * See static_cpu_has() for an example.
+	 */
+	.altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) {
+		*(.altinstr_aux)
+	}
+
 	INIT_DATA_SECTION(16)
 
 	.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
@@ -325,6 +334,7 @@ SECTIONS
 		__brk_limit = .;
 	}
 
+	. = ALIGN(PAGE_SIZE);
 	_end = .;
 
         STABS_DEBUG
@@ -332,7 +342,10 @@ SECTIONS
 
 	/* Sections to be discarded */
 	DISCARDS
-	/DISCARD/ : { *(.eh_frame) }
+	/DISCARD/ : {
+		*(.eh_frame)
+		*(__func_stack_frame_non_standard)
+	}
 }
 
 
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index a0695be19864..cd05942bc918 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -37,6 +37,8 @@ EXPORT_SYMBOL(__copy_user_nocache);
 EXPORT_SYMBOL(_copy_from_user);
 EXPORT_SYMBOL(_copy_to_user);
 
+EXPORT_SYMBOL_GPL(memcpy_mcsafe);
+
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 3839628d962e..dad5fe9633a3 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -68,7 +68,6 @@ struct x86_init_ops x86_init __initdata = {
 
 	.timers = {
 		.setup_percpu_clockev	= setup_boot_APIC_clock,
-		.tsc_pre_init		= x86_init_noop,
 		.timer_init		= hpet_time_init,
 		.wallclock_init		= x86_init_noop,
 	},
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index a1ff508bb423..464fa477afbf 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -13,9 +13,10 @@ kvm-$(CONFIG_KVM_ASYNC_PF)	+= $(KVM)/async_pf.o
 
 kvm-y			+= x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
 			   i8254.o ioapic.o irq_comm.o cpuid.o pmu.o mtrr.o \
-			   hyperv.o
+			   hyperv.o page_track.o
 
 kvm-$(CONFIG_KVM_DEVICE_ASSIGNMENT)	+= assigned-dev.o iommu.o
+
 kvm-intel-y		+= vmx.o pmu_intel.o
 kvm-amd-y		+= svm.o pmu_amd.o
 
diff --git a/arch/x86/kvm/assigned-dev.c b/arch/x86/kvm/assigned-dev.c
index 9dc091acd5fb..308b8597c691 100644
--- a/arch/x86/kvm/assigned-dev.c
+++ b/arch/x86/kvm/assigned-dev.c
@@ -51,11 +51,9 @@ struct kvm_assigned_dev_kernel {
 static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head,
 						      int assigned_dev_id)
 {
-	struct list_head *ptr;
 	struct kvm_assigned_dev_kernel *match;
 
-	list_for_each(ptr, head) {
-		match = list_entry(ptr, struct kvm_assigned_dev_kernel, list);
+	list_for_each_entry(match, head, list) {
 		if (match->assigned_dev_id == assigned_dev_id)
 			return match;
 	}
@@ -373,14 +371,10 @@ static void kvm_free_assigned_device(struct kvm *kvm,
 
 void kvm_free_all_assigned_devices(struct kvm *kvm)
 {
-	struct list_head *ptr, *ptr2;
-	struct kvm_assigned_dev_kernel *assigned_dev;
-
-	list_for_each_safe(ptr, ptr2, &kvm->arch.assigned_dev_head) {
-		assigned_dev = list_entry(ptr,
-					  struct kvm_assigned_dev_kernel,
-					  list);
+	struct kvm_assigned_dev_kernel *assigned_dev, *tmp;
 
+	list_for_each_entry_safe(assigned_dev, tmp,
+				 &kvm->arch.assigned_dev_head, list) {
 		kvm_free_assigned_device(kvm, assigned_dev);
 	}
 }
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 6525e926f566..bbbaa802d13e 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -46,11 +46,18 @@ static u32 xstate_required_size(u64 xstate_bv, bool compacted)
 	return ret;
 }
 
+bool kvm_mpx_supported(void)
+{
+	return ((host_xcr0 & (XFEATURE_MASK_BNDREGS | XFEATURE_MASK_BNDCSR))
+		 && kvm_x86_ops->mpx_supported());
+}
+EXPORT_SYMBOL_GPL(kvm_mpx_supported);
+
 u64 kvm_supported_xcr0(void)
 {
 	u64 xcr0 = KVM_SUPPORTED_XCR0 & host_xcr0;
 
-	if (!kvm_x86_ops->mpx_supported())
+	if (!kvm_mpx_supported())
 		xcr0 &= ~(XFEATURE_MASK_BNDREGS | XFEATURE_MASK_BNDCSR);
 
 	return xcr0;
@@ -81,6 +88,16 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu)
 			apic->lapic_timer.timer_mode_mask = 1 << 17;
 	}
 
+	best = kvm_find_cpuid_entry(vcpu, 7, 0);
+	if (best) {
+		/* Update OSPKE bit */
+		if (boot_cpu_has(X86_FEATURE_PKU) && best->function == 0x7) {
+			best->ecx &= ~F(OSPKE);
+			if (kvm_read_cr4_bits(vcpu, X86_CR4_PKE))
+				best->ecx |= F(OSPKE);
+		}
+	}
+
 	best = kvm_find_cpuid_entry(vcpu, 0xD, 0);
 	if (!best) {
 		vcpu->arch.guest_supported_xcr0 = 0;
@@ -97,8 +114,7 @@ int kvm_update_cpuid(struct kvm_vcpu *vcpu)
 	if (best && (best->eax & (F(XSAVES) | F(XSAVEC))))
 		best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
 
-	vcpu->arch.eager_fpu = use_eager_fpu() || guest_cpuid_has_mpx(vcpu);
-	if (vcpu->arch.eager_fpu)
+	if (use_eager_fpu())
 		kvm_x86_ops->fpu_activate(vcpu);
 
 	/*
@@ -295,11 +311,11 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 #endif
 	unsigned f_rdtscp = kvm_x86_ops->rdtscp_supported() ? F(RDTSCP) : 0;
 	unsigned f_invpcid = kvm_x86_ops->invpcid_supported() ? F(INVPCID) : 0;
-	unsigned f_mpx = kvm_x86_ops->mpx_supported() ? F(MPX) : 0;
+	unsigned f_mpx = kvm_mpx_supported() ? F(MPX) : 0;
 	unsigned f_xsaves = kvm_x86_ops->xsaves_supported() ? F(XSAVES) : 0;
 
 	/* cpuid 1.edx */
-	const u32 kvm_supported_word0_x86_features =
+	const u32 kvm_cpuid_1_edx_x86_features =
 		F(FPU) | F(VME) | F(DE) | F(PSE) |
 		F(TSC) | F(MSR) | F(PAE) | F(MCE) |
 		F(CX8) | F(APIC) | 0 /* Reserved */ | F(SEP) |
@@ -309,7 +325,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		F(FXSR) | F(XMM) | F(XMM2) | F(SELFSNOOP) |
 		0 /* HTT, TM, Reserved, PBE */;
 	/* cpuid 0x80000001.edx */
-	const u32 kvm_supported_word1_x86_features =
+	const u32 kvm_cpuid_8000_0001_edx_x86_features =
 		F(FPU) | F(VME) | F(DE) | F(PSE) |
 		F(TSC) | F(MSR) | F(PAE) | F(MCE) |
 		F(CX8) | F(APIC) | 0 /* Reserved */ | F(SYSCALL) |
@@ -319,7 +335,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		F(FXSR) | F(FXSR_OPT) | f_gbpages | f_rdtscp |
 		0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
 	/* cpuid 1.ecx */
-	const u32 kvm_supported_word4_x86_features =
+	const u32 kvm_cpuid_1_ecx_x86_features =
 		/* NOTE: MONITOR (and MWAIT) are emulated as NOP,
 		 * but *not* advertised to guests via CPUID ! */
 		F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ |
@@ -331,29 +347,32 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		0 /* Reserved*/ | F(AES) | F(XSAVE) | 0 /* OSXSAVE */ | F(AVX) |
 		F(F16C) | F(RDRAND);
 	/* cpuid 0x80000001.ecx */
-	const u32 kvm_supported_word6_x86_features =
+	const u32 kvm_cpuid_8000_0001_ecx_x86_features =
 		F(LAHF_LM) | F(CMP_LEGACY) | 0 /*SVM*/ | 0 /* ExtApicSpace */ |
 		F(CR8_LEGACY) | F(ABM) | F(SSE4A) | F(MISALIGNSSE) |
 		F(3DNOWPREFETCH) | F(OSVW) | 0 /* IBS */ | F(XOP) |
 		0 /* SKINIT, WDT, LWP */ | F(FMA4) | F(TBM);
 
 	/* cpuid 0xC0000001.edx */
-	const u32 kvm_supported_word5_x86_features =
+	const u32 kvm_cpuid_C000_0001_edx_x86_features =
 		F(XSTORE) | F(XSTORE_EN) | F(XCRYPT) | F(XCRYPT_EN) |
 		F(ACE2) | F(ACE2_EN) | F(PHE) | F(PHE_EN) |
 		F(PMM) | F(PMM_EN);
 
 	/* cpuid 7.0.ebx */
-	const u32 kvm_supported_word9_x86_features =
+	const u32 kvm_cpuid_7_0_ebx_x86_features =
 		F(FSGSBASE) | F(BMI1) | F(HLE) | F(AVX2) | F(SMEP) |
 		F(BMI2) | F(ERMS) | f_invpcid | F(RTM) | f_mpx | F(RDSEED) |
 		F(ADX) | F(SMAP) | F(AVX512F) | F(AVX512PF) | F(AVX512ER) |
 		F(AVX512CD) | F(CLFLUSHOPT) | F(CLWB) | F(PCOMMIT);
 
 	/* cpuid 0xD.1.eax */
-	const u32 kvm_supported_word10_x86_features =
+	const u32 kvm_cpuid_D_1_eax_x86_features =
 		F(XSAVEOPT) | F(XSAVEC) | F(XGETBV1) | f_xsaves;
 
+	/* cpuid 7.0.ecx*/
+	const u32 kvm_cpuid_7_0_ecx_x86_features = F(PKU) | 0 /*OSPKE*/;
+
 	/* all calls to cpuid_count() should be made on the same cpu */
 	get_cpu();
 
@@ -370,10 +389,10 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		entry->eax = min(entry->eax, (u32)0xd);
 		break;
 	case 1:
-		entry->edx &= kvm_supported_word0_x86_features;
-		cpuid_mask(&entry->edx, 0);
-		entry->ecx &= kvm_supported_word4_x86_features;
-		cpuid_mask(&entry->ecx, 4);
+		entry->edx &= kvm_cpuid_1_edx_x86_features;
+		cpuid_mask(&entry->edx, CPUID_1_EDX);
+		entry->ecx &= kvm_cpuid_1_ecx_x86_features;
+		cpuid_mask(&entry->ecx, CPUID_1_ECX);
 		/* we support x2apic emulation even if host does not support
 		 * it since we emulate x2apic in software */
 		entry->ecx |= F(X2APIC);
@@ -427,14 +446,20 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
 		/* Mask ebx against host capability word 9 */
 		if (index == 0) {
-			entry->ebx &= kvm_supported_word9_x86_features;
-			cpuid_mask(&entry->ebx, 9);
+			entry->ebx &= kvm_cpuid_7_0_ebx_x86_features;
+			cpuid_mask(&entry->ebx, CPUID_7_0_EBX);
 			// TSC_ADJUST is emulated
 			entry->ebx |= F(TSC_ADJUST);
-		} else
+			entry->ecx &= kvm_cpuid_7_0_ecx_x86_features;
+			cpuid_mask(&entry->ecx, CPUID_7_ECX);
+			/* PKU is not yet implemented for shadow paging. */
+			if (!tdp_enabled)
+				entry->ecx &= ~F(PKU);
+		} else {
 			entry->ebx = 0;
+			entry->ecx = 0;
+		}
 		entry->eax = 0;
-		entry->ecx = 0;
 		entry->edx = 0;
 		break;
 	}
@@ -508,7 +533,8 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 
 			do_cpuid_1_ent(&entry[i], function, idx);
 			if (idx == 1) {
-				entry[i].eax &= kvm_supported_word10_x86_features;
+				entry[i].eax &= kvm_cpuid_D_1_eax_x86_features;
+				cpuid_mask(&entry[i].eax, CPUID_D_1_EAX);
 				entry[i].ebx = 0;
 				if (entry[i].eax & (F(XSAVES)|F(XSAVEC)))
 					entry[i].ebx =
@@ -558,10 +584,10 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		entry->eax = min(entry->eax, 0x8000001a);
 		break;
 	case 0x80000001:
-		entry->edx &= kvm_supported_word1_x86_features;
-		cpuid_mask(&entry->edx, 1);
-		entry->ecx &= kvm_supported_word6_x86_features;
-		cpuid_mask(&entry->ecx, 6);
+		entry->edx &= kvm_cpuid_8000_0001_edx_x86_features;
+		cpuid_mask(&entry->edx, CPUID_8000_0001_EDX);
+		entry->ecx &= kvm_cpuid_8000_0001_ecx_x86_features;
+		cpuid_mask(&entry->ecx, CPUID_8000_0001_ECX);
 		break;
 	case 0x80000007: /* Advanced power management */
 		/* invariant TSC is CPUID.80000007H:EDX[8] */
@@ -594,8 +620,8 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		entry->eax = min(entry->eax, 0xC0000004);
 		break;
 	case 0xC0000001:
-		entry->edx &= kvm_supported_word5_x86_features;
-		cpuid_mask(&entry->edx, 5);
+		entry->edx &= kvm_cpuid_C000_0001_edx_x86_features;
+		cpuid_mask(&entry->edx, CPUID_C000_0001_EDX);
 		break;
 	case 3: /* Processor serial number */
 	case 5: /* MONITOR/MWAIT */
diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h
index 06332cb7e7d1..e17a74b1d852 100644
--- a/arch/x86/kvm/cpuid.h
+++ b/arch/x86/kvm/cpuid.h
@@ -2,8 +2,10 @@
 #define ARCH_X86_KVM_CPUID_H
 
 #include "x86.h"
+#include <asm/cpu.h>
 
 int kvm_update_cpuid(struct kvm_vcpu *vcpu);
+bool kvm_mpx_supported(void);
 struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
 					      u32 function, u32 index);
 int kvm_dev_ioctl_get_cpuid(struct kvm_cpuid2 *cpuid,
@@ -38,6 +40,14 @@ static inline bool guest_cpuid_has_xsave(struct kvm_vcpu *vcpu)
 	return best && (best->ecx & bit(X86_FEATURE_XSAVE));
 }
 
+static inline bool guest_cpuid_has_mtrr(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 1, 0);
+	return best && (best->edx & bit(X86_FEATURE_MTRR));
+}
+
 static inline bool guest_cpuid_has_tsc_adjust(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
@@ -70,6 +80,14 @@ static inline bool guest_cpuid_has_fsgsbase(struct kvm_vcpu *vcpu)
 	return best && (best->ebx & bit(X86_FEATURE_FSGSBASE));
 }
 
+static inline bool guest_cpuid_has_pku(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 7, 0);
+	return best && (best->ecx & bit(X86_FEATURE_PKU));
+}
+
 static inline bool guest_cpuid_has_longmode(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
@@ -126,14 +144,6 @@ static inline bool guest_cpuid_has_rtm(struct kvm_vcpu *vcpu)
 	return best && (best->ebx & bit(X86_FEATURE_RTM));
 }
 
-static inline bool guest_cpuid_has_mpx(struct kvm_vcpu *vcpu)
-{
-	struct kvm_cpuid_entry2 *best;
-
-	best = kvm_find_cpuid_entry(vcpu, 7, 0);
-	return best && (best->ebx & bit(X86_FEATURE_MPX));
-}
-
 static inline bool guest_cpuid_has_pcommit(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
@@ -170,4 +180,37 @@ static inline bool guest_cpuid_has_nrips(struct kvm_vcpu *vcpu)
 }
 #undef BIT_NRIPS
 
+static inline int guest_cpuid_family(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 0x1, 0);
+	if (!best)
+		return -1;
+
+	return x86_family(best->eax);
+}
+
+static inline int guest_cpuid_model(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 0x1, 0);
+	if (!best)
+		return -1;
+
+	return x86_model(best->eax);
+}
+
+static inline int guest_cpuid_stepping(struct kvm_vcpu *vcpu)
+{
+	struct kvm_cpuid_entry2 *best;
+
+	best = kvm_find_cpuid_entry(vcpu, 0x1, 0);
+	if (!best)
+		return -1;
+
+	return x86_stepping(best->eax);
+}
+
 #endif
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 1505587d06e9..0f6294376fbd 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -309,23 +309,29 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
 
 static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
 
-#define FOP_ALIGN ".align " __stringify(FASTOP_SIZE) " \n\t"
+#define FOP_FUNC(name) \
+	".align " __stringify(FASTOP_SIZE) " \n\t" \
+	".type " name ", @function \n\t" \
+	name ":\n\t"
+
 #define FOP_RET   "ret \n\t"
 
 #define FOP_START(op) \
 	extern void em_##op(struct fastop *fake); \
 	asm(".pushsection .text, \"ax\" \n\t" \
 	    ".global em_" #op " \n\t" \
-            FOP_ALIGN \
-	    "em_" #op ": \n\t"
+	    FOP_FUNC("em_" #op)
 
 #define FOP_END \
 	    ".popsection")
 
-#define FOPNOP() FOP_ALIGN FOP_RET
+#define FOPNOP() \
+	FOP_FUNC(__stringify(__UNIQUE_ID(nop))) \
+	FOP_RET
 
 #define FOP1E(op,  dst) \
-	FOP_ALIGN "10: " #op " %" #dst " \n\t" FOP_RET
+	FOP_FUNC(#op "_" #dst) \
+	"10: " #op " %" #dst " \n\t" FOP_RET
 
 #define FOP1EEX(op,  dst) \
 	FOP1E(op, dst) _ASM_EXTABLE(10b, kvm_fastop_exception)
@@ -357,7 +363,8 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
 	FOP_END
 
 #define FOP2E(op,  dst, src)	   \
-	FOP_ALIGN #op " %" #src ", %" #dst " \n\t" FOP_RET
+	FOP_FUNC(#op "_" #dst "_" #src) \
+	#op " %" #src ", %" #dst " \n\t" FOP_RET
 
 #define FASTOP2(op) \
 	FOP_START(op) \
@@ -395,7 +402,8 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
 	FOP_END
 
 #define FOP3E(op,  dst, src, src2) \
-	FOP_ALIGN #op " %" #src2 ", %" #src ", %" #dst " \n\t" FOP_RET
+	FOP_FUNC(#op "_" #dst "_" #src "_" #src2) \
+	#op " %" #src2 ", %" #src ", %" #dst " \n\t" FOP_RET
 
 /* 3-operand, word-only, src2=cl */
 #define FASTOP3WCL(op) \
@@ -407,7 +415,12 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
 	FOP_END
 
 /* Special case for SETcc - 1 instruction per cc */
-#define FOP_SETCC(op) ".align 4; " #op " %al; ret \n\t"
+#define FOP_SETCC(op) \
+	".align 4 \n\t" \
+	".type " #op ", @function \n\t" \
+	#op ": \n\t" \
+	#op " %al \n\t" \
+	FOP_RET
 
 asm(".global kvm_fastop_exception \n"
     "kvm_fastop_exception: xor %esi, %esi; ret");
@@ -650,10 +663,10 @@ static __always_inline int __linearize(struct x86_emulate_ctxt *ctxt,
 	u16 sel;
 
 	la = seg_base(ctxt, addr.seg) + addr.ea;
-	*linear = la;
 	*max_size = 0;
 	switch (mode) {
 	case X86EMUL_MODE_PROT64:
+		*linear = la;
 		if (is_noncanonical_address(la))
 			goto bad;
 
@@ -662,6 +675,7 @@ static __always_inline int __linearize(struct x86_emulate_ctxt *ctxt,
 			goto bad;
 		break;
 	default:
+		*linear = la = (u32)la;
 		usable = ctxt->ops->get_segment(ctxt, &sel, &desc, NULL,
 						addr.seg);
 		if (!usable)
@@ -689,7 +703,6 @@ static __always_inline int __linearize(struct x86_emulate_ctxt *ctxt,
 			if (size > *max_size)
 				goto bad;
 		}
-		la &= (u32)-1;
 		break;
 	}
 	if (insn_aligned(ctxt, size) && ((la & (size - 1)) != 0))
@@ -956,7 +969,7 @@ static int em_bsr_c(struct x86_emulate_ctxt *ctxt)
 	return fastop(ctxt, em_bsr);
 }
 
-static u8 test_cc(unsigned int condition, unsigned long flags)
+static __always_inline u8 test_cc(unsigned int condition, unsigned long flags)
 {
 	u8 rc;
 	void (*fop)(void) = (void *)em_setcc + 4 * (condition & 0xf);
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 62cf8c915e95..01bd7b7a6866 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -23,13 +23,665 @@
 
 #include "x86.h"
 #include "lapic.h"
+#include "ioapic.h"
 #include "hyperv.h"
 
 #include <linux/kvm_host.h>
+#include <linux/highmem.h>
+#include <asm/apicdef.h>
 #include <trace/events/kvm.h>
 
 #include "trace.h"
 
+static inline u64 synic_read_sint(struct kvm_vcpu_hv_synic *synic, int sint)
+{
+	return atomic64_read(&synic->sint[sint]);
+}
+
+static inline int synic_get_sint_vector(u64 sint_value)
+{
+	if (sint_value & HV_SYNIC_SINT_MASKED)
+		return -1;
+	return sint_value & HV_SYNIC_SINT_VECTOR_MASK;
+}
+
+static bool synic_has_vector_connected(struct kvm_vcpu_hv_synic *synic,
+				      int vector)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(synic->sint); i++) {
+		if (synic_get_sint_vector(synic_read_sint(synic, i)) == vector)
+			return true;
+	}
+	return false;
+}
+
+static bool synic_has_vector_auto_eoi(struct kvm_vcpu_hv_synic *synic,
+				     int vector)
+{
+	int i;
+	u64 sint_value;
+
+	for (i = 0; i < ARRAY_SIZE(synic->sint); i++) {
+		sint_value = synic_read_sint(synic, i);
+		if (synic_get_sint_vector(sint_value) == vector &&
+		    sint_value & HV_SYNIC_SINT_AUTO_EOI)
+			return true;
+	}
+	return false;
+}
+
+static int synic_set_sint(struct kvm_vcpu_hv_synic *synic, int sint,
+			  u64 data, bool host)
+{
+	int vector;
+
+	vector = data & HV_SYNIC_SINT_VECTOR_MASK;
+	if (vector < 16 && !host)
+		return 1;
+	/*
+	 * Guest may configure multiple SINTs to use the same vector, so
+	 * we maintain a bitmap of vectors handled by synic, and a
+	 * bitmap of vectors with auto-eoi behavior.  The bitmaps are
+	 * updated here, and atomically queried on fast paths.
+	 */
+
+	atomic64_set(&synic->sint[sint], data);
+
+	if (synic_has_vector_connected(synic, vector))
+		__set_bit(vector, synic->vec_bitmap);
+	else
+		__clear_bit(vector, synic->vec_bitmap);
+
+	if (synic_has_vector_auto_eoi(synic, vector))
+		__set_bit(vector, synic->auto_eoi_bitmap);
+	else
+		__clear_bit(vector, synic->auto_eoi_bitmap);
+
+	/* Load SynIC vectors into EOI exit bitmap */
+	kvm_make_request(KVM_REQ_SCAN_IOAPIC, synic_to_vcpu(synic));
+	return 0;
+}
+
+static struct kvm_vcpu_hv_synic *synic_get(struct kvm *kvm, u32 vcpu_id)
+{
+	struct kvm_vcpu *vcpu;
+	struct kvm_vcpu_hv_synic *synic;
+
+	if (vcpu_id >= atomic_read(&kvm->online_vcpus))
+		return NULL;
+	vcpu = kvm_get_vcpu(kvm, vcpu_id);
+	if (!vcpu)
+		return NULL;
+	synic = vcpu_to_synic(vcpu);
+	return (synic->active) ? synic : NULL;
+}
+
+static void synic_clear_sint_msg_pending(struct kvm_vcpu_hv_synic *synic,
+					u32 sint)
+{
+	struct kvm_vcpu *vcpu = synic_to_vcpu(synic);
+	struct page *page;
+	gpa_t gpa;
+	struct hv_message *msg;
+	struct hv_message_page *msg_page;
+
+	gpa = synic->msg_page & PAGE_MASK;
+	page = kvm_vcpu_gfn_to_page(vcpu, gpa >> PAGE_SHIFT);
+	if (is_error_page(page)) {
+		vcpu_err(vcpu, "Hyper-V SynIC can't get msg page, gpa 0x%llx\n",
+			 gpa);
+		return;
+	}
+	msg_page = kmap_atomic(page);
+
+	msg = &msg_page->sint_message[sint];
+	msg->header.message_flags.msg_pending = 0;
+
+	kunmap_atomic(msg_page);
+	kvm_release_page_dirty(page);
+	kvm_vcpu_mark_page_dirty(vcpu, gpa >> PAGE_SHIFT);
+}
+
+static void kvm_hv_notify_acked_sint(struct kvm_vcpu *vcpu, u32 sint)
+{
+	struct kvm *kvm = vcpu->kvm;
+	struct kvm_vcpu_hv_synic *synic = vcpu_to_synic(vcpu);
+	struct kvm_vcpu_hv *hv_vcpu = vcpu_to_hv_vcpu(vcpu);
+	struct kvm_vcpu_hv_stimer *stimer;
+	int gsi, idx, stimers_pending;
+
+	trace_kvm_hv_notify_acked_sint(vcpu->vcpu_id, sint);
+
+	if (synic->msg_page & HV_SYNIC_SIMP_ENABLE)
+		synic_clear_sint_msg_pending(synic, sint);
+
+	/* Try to deliver pending Hyper-V SynIC timers messages */
+	stimers_pending = 0;
+	for (idx = 0; idx < ARRAY_SIZE(hv_vcpu->stimer); idx++) {
+		stimer = &hv_vcpu->stimer[idx];
+		if (stimer->msg_pending &&
+		    (stimer->config & HV_STIMER_ENABLE) &&
+		    HV_STIMER_SINT(stimer->config) == sint) {
+			set_bit(stimer->index,
+				hv_vcpu->stimer_pending_bitmap);
+			stimers_pending++;
+		}
+	}
+	if (stimers_pending)
+		kvm_make_request(KVM_REQ_HV_STIMER, vcpu);
+
+	idx = srcu_read_lock(&kvm->irq_srcu);
+	gsi = atomic_read(&synic->sint_to_gsi[sint]);
+	if (gsi != -1)
+		kvm_notify_acked_gsi(kvm, gsi);
+	srcu_read_unlock(&kvm->irq_srcu, idx);
+}
+
+static void synic_exit(struct kvm_vcpu_hv_synic *synic, u32 msr)
+{
+	struct kvm_vcpu *vcpu = synic_to_vcpu(synic);
+	struct kvm_vcpu_hv *hv_vcpu = &vcpu->arch.hyperv;
+
+	hv_vcpu->exit.type = KVM_EXIT_HYPERV_SYNIC;
+	hv_vcpu->exit.u.synic.msr = msr;
+	hv_vcpu->exit.u.synic.control = synic->control;
+	hv_vcpu->exit.u.synic.evt_page = synic->evt_page;
+	hv_vcpu->exit.u.synic.msg_page = synic->msg_page;
+
+	kvm_make_request(KVM_REQ_HV_EXIT, vcpu);
+}
+
+static int synic_set_msr(struct kvm_vcpu_hv_synic *synic,
+			 u32 msr, u64 data, bool host)
+{
+	struct kvm_vcpu *vcpu = synic_to_vcpu(synic);
+	int ret;
+
+	if (!synic->active)
+		return 1;
+
+	trace_kvm_hv_synic_set_msr(vcpu->vcpu_id, msr, data, host);
+
+	ret = 0;
+	switch (msr) {
+	case HV_X64_MSR_SCONTROL:
+		synic->control = data;
+		if (!host)
+			synic_exit(synic, msr);
+		break;
+	case HV_X64_MSR_SVERSION:
+		if (!host) {
+			ret = 1;
+			break;
+		}
+		synic->version = data;
+		break;
+	case HV_X64_MSR_SIEFP:
+		if (data & HV_SYNIC_SIEFP_ENABLE)
+			if (kvm_clear_guest(vcpu->kvm,
+					    data & PAGE_MASK, PAGE_SIZE)) {
+				ret = 1;
+				break;
+			}
+		synic->evt_page = data;
+		if (!host)
+			synic_exit(synic, msr);
+		break;
+	case HV_X64_MSR_SIMP:
+		if (data & HV_SYNIC_SIMP_ENABLE)
+			if (kvm_clear_guest(vcpu->kvm,
+					    data & PAGE_MASK, PAGE_SIZE)) {
+				ret = 1;
+				break;
+			}
+		synic->msg_page = data;
+		if (!host)
+			synic_exit(synic, msr);
+		break;
+	case HV_X64_MSR_EOM: {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(synic->sint); i++)
+			kvm_hv_notify_acked_sint(vcpu, i);
+		break;
+	}
+	case HV_X64_MSR_SINT0 ... HV_X64_MSR_SINT15:
+		ret = synic_set_sint(synic, msr - HV_X64_MSR_SINT0, data, host);
+		break;
+	default:
+		ret = 1;
+		break;
+	}
+	return ret;
+}
+
+static int synic_get_msr(struct kvm_vcpu_hv_synic *synic, u32 msr, u64 *pdata)
+{
+	int ret;
+
+	if (!synic->active)
+		return 1;
+
+	ret = 0;
+	switch (msr) {
+	case HV_X64_MSR_SCONTROL:
+		*pdata = synic->control;
+		break;
+	case HV_X64_MSR_SVERSION:
+		*pdata = synic->version;
+		break;
+	case HV_X64_MSR_SIEFP:
+		*pdata = synic->evt_page;
+		break;
+	case HV_X64_MSR_SIMP:
+		*pdata = synic->msg_page;
+		break;
+	case HV_X64_MSR_EOM:
+		*pdata = 0;
+		break;
+	case HV_X64_MSR_SINT0 ... HV_X64_MSR_SINT15:
+		*pdata = atomic64_read(&synic->sint[msr - HV_X64_MSR_SINT0]);
+		break;
+	default:
+		ret = 1;
+		break;
+	}
+	return ret;
+}
+
+int synic_set_irq(struct kvm_vcpu_hv_synic *synic, u32 sint)
+{
+	struct kvm_vcpu *vcpu = synic_to_vcpu(synic);
+	struct kvm_lapic_irq irq;
+	int ret, vector;
+
+	if (sint >= ARRAY_SIZE(synic->sint))
+		return -EINVAL;
+
+	vector = synic_get_sint_vector(synic_read_sint(synic, sint));
+	if (vector < 0)
+		return -ENOENT;
+
+	memset(&irq, 0, sizeof(irq));
+	irq.dest_id = kvm_apic_id(vcpu->arch.apic);
+	irq.dest_mode = APIC_DEST_PHYSICAL;
+	irq.delivery_mode = APIC_DM_FIXED;
+	irq.vector = vector;
+	irq.level = 1;
+
+	ret = kvm_irq_delivery_to_apic(vcpu->kvm, NULL, &irq, NULL);
+	trace_kvm_hv_synic_set_irq(vcpu->vcpu_id, sint, irq.vector, ret);
+	return ret;
+}
+
+int kvm_hv_synic_set_irq(struct kvm *kvm, u32 vcpu_id, u32 sint)
+{
+	struct kvm_vcpu_hv_synic *synic;
+
+	synic = synic_get(kvm, vcpu_id);
+	if (!synic)
+		return -EINVAL;
+
+	return synic_set_irq(synic, sint);
+}
+
+void kvm_hv_synic_send_eoi(struct kvm_vcpu *vcpu, int vector)
+{
+	struct kvm_vcpu_hv_synic *synic = vcpu_to_synic(vcpu);
+	int i;
+
+	trace_kvm_hv_synic_send_eoi(vcpu->vcpu_id, vector);
+
+	for (i = 0; i < ARRAY_SIZE(synic->sint); i++)
+		if (synic_get_sint_vector(synic_read_sint(synic, i)) == vector)
+			kvm_hv_notify_acked_sint(vcpu, i);
+}
+
+static int kvm_hv_set_sint_gsi(struct kvm *kvm, u32 vcpu_id, u32 sint, int gsi)
+{
+	struct kvm_vcpu_hv_synic *synic;
+
+	synic = synic_get(kvm, vcpu_id);
+	if (!synic)
+		return -EINVAL;
+
+	if (sint >= ARRAY_SIZE(synic->sint_to_gsi))
+		return -EINVAL;
+
+	atomic_set(&synic->sint_to_gsi[sint], gsi);
+	return 0;
+}
+
+void kvm_hv_irq_routing_update(struct kvm *kvm)
+{
+	struct kvm_irq_routing_table *irq_rt;
+	struct kvm_kernel_irq_routing_entry *e;
+	u32 gsi;
+
+	irq_rt = srcu_dereference_check(kvm->irq_routing, &kvm->irq_srcu,
+					lockdep_is_held(&kvm->irq_lock));
+
+	for (gsi = 0; gsi < irq_rt->nr_rt_entries; gsi++) {
+		hlist_for_each_entry(e, &irq_rt->map[gsi], link) {
+			if (e->type == KVM_IRQ_ROUTING_HV_SINT)
+				kvm_hv_set_sint_gsi(kvm, e->hv_sint.vcpu,
+						    e->hv_sint.sint, gsi);
+		}
+	}
+}
+
+static void synic_init(struct kvm_vcpu_hv_synic *synic)
+{
+	int i;
+
+	memset(synic, 0, sizeof(*synic));
+	synic->version = HV_SYNIC_VERSION_1;
+	for (i = 0; i < ARRAY_SIZE(synic->sint); i++) {
+		atomic64_set(&synic->sint[i], HV_SYNIC_SINT_MASKED);
+		atomic_set(&synic->sint_to_gsi[i], -1);
+	}
+}
+
+static u64 get_time_ref_counter(struct kvm *kvm)
+{
+	return div_u64(get_kernel_ns() + kvm->arch.kvmclock_offset, 100);
+}
+
+static void stimer_mark_pending(struct kvm_vcpu_hv_stimer *stimer,
+				bool vcpu_kick)
+{
+	struct kvm_vcpu *vcpu = stimer_to_vcpu(stimer);
+
+	set_bit(stimer->index,
+		vcpu_to_hv_vcpu(vcpu)->stimer_pending_bitmap);
+	kvm_make_request(KVM_REQ_HV_STIMER, vcpu);
+	if (vcpu_kick)
+		kvm_vcpu_kick(vcpu);
+}
+
+static void stimer_cleanup(struct kvm_vcpu_hv_stimer *stimer)
+{
+	struct kvm_vcpu *vcpu = stimer_to_vcpu(stimer);
+
+	trace_kvm_hv_stimer_cleanup(stimer_to_vcpu(stimer)->vcpu_id,
+				    stimer->index);
+
+	hrtimer_cancel(&stimer->timer);
+	clear_bit(stimer->index,
+		  vcpu_to_hv_vcpu(vcpu)->stimer_pending_bitmap);
+	stimer->msg_pending = false;
+	stimer->exp_time = 0;
+}
+
+static enum hrtimer_restart stimer_timer_callback(struct hrtimer *timer)
+{
+	struct kvm_vcpu_hv_stimer *stimer;
+
+	stimer = container_of(timer, struct kvm_vcpu_hv_stimer, timer);
+	trace_kvm_hv_stimer_callback(stimer_to_vcpu(stimer)->vcpu_id,
+				     stimer->index);
+	stimer_mark_pending(stimer, true);
+
+	return HRTIMER_NORESTART;
+}
+
+/*
+ * stimer_start() assumptions:
+ * a) stimer->count is not equal to 0
+ * b) stimer->config has HV_STIMER_ENABLE flag
+ */
+static int stimer_start(struct kvm_vcpu_hv_stimer *stimer)
+{
+	u64 time_now;
+	ktime_t ktime_now;
+
+	time_now = get_time_ref_counter(stimer_to_vcpu(stimer)->kvm);
+	ktime_now = ktime_get();
+
+	if (stimer->config & HV_STIMER_PERIODIC) {
+		if (stimer->exp_time) {
+			if (time_now >= stimer->exp_time) {
+				u64 remainder;
+
+				div64_u64_rem(time_now - stimer->exp_time,
+					      stimer->count, &remainder);
+				stimer->exp_time =
+					time_now + (stimer->count - remainder);
+			}
+		} else
+			stimer->exp_time = time_now + stimer->count;
+
+		trace_kvm_hv_stimer_start_periodic(
+					stimer_to_vcpu(stimer)->vcpu_id,
+					stimer->index,
+					time_now, stimer->exp_time);
+
+		hrtimer_start(&stimer->timer,
+			      ktime_add_ns(ktime_now,
+					   100 * (stimer->exp_time - time_now)),
+			      HRTIMER_MODE_ABS);
+		return 0;
+	}
+	stimer->exp_time = stimer->count;
+	if (time_now >= stimer->count) {
+		/*
+		 * Expire timer according to Hypervisor Top-Level Functional
+		 * specification v4(15.3.1):
+		 * "If a one shot is enabled and the specified count is in
+		 * the past, it will expire immediately."
+		 */
+		stimer_mark_pending(stimer, false);
+		return 0;
+	}
+
+	trace_kvm_hv_stimer_start_one_shot(stimer_to_vcpu(stimer)->vcpu_id,
+					   stimer->index,
+					   time_now, stimer->count);
+
+	hrtimer_start(&stimer->timer,
+		      ktime_add_ns(ktime_now, 100 * (stimer->count - time_now)),
+		      HRTIMER_MODE_ABS);
+	return 0;
+}
+
+static int stimer_set_config(struct kvm_vcpu_hv_stimer *stimer, u64 config,
+			     bool host)
+{
+	trace_kvm_hv_stimer_set_config(stimer_to_vcpu(stimer)->vcpu_id,
+				       stimer->index, config, host);
+
+	stimer_cleanup(stimer);
+	if ((stimer->config & HV_STIMER_ENABLE) && HV_STIMER_SINT(config) == 0)
+		config &= ~HV_STIMER_ENABLE;
+	stimer->config = config;
+	stimer_mark_pending(stimer, false);
+	return 0;
+}
+
+static int stimer_set_count(struct kvm_vcpu_hv_stimer *stimer, u64 count,
+			    bool host)
+{
+	trace_kvm_hv_stimer_set_count(stimer_to_vcpu(stimer)->vcpu_id,
+				      stimer->index, count, host);
+
+	stimer_cleanup(stimer);
+	stimer->count = count;
+	if (stimer->count == 0)
+		stimer->config &= ~HV_STIMER_ENABLE;
+	else if (stimer->config & HV_STIMER_AUTOENABLE)
+		stimer->config |= HV_STIMER_ENABLE;
+	stimer_mark_pending(stimer, false);
+	return 0;
+}
+
+static int stimer_get_config(struct kvm_vcpu_hv_stimer *stimer, u64 *pconfig)
+{
+	*pconfig = stimer->config;
+	return 0;
+}
+
+static int stimer_get_count(struct kvm_vcpu_hv_stimer *stimer, u64 *pcount)
+{
+	*pcount = stimer->count;
+	return 0;
+}
+
+static int synic_deliver_msg(struct kvm_vcpu_hv_synic *synic, u32 sint,
+			     struct hv_message *src_msg)
+{
+	struct kvm_vcpu *vcpu = synic_to_vcpu(synic);
+	struct page *page;
+	gpa_t gpa;
+	struct hv_message *dst_msg;
+	int r;
+	struct hv_message_page *msg_page;
+
+	if (!(synic->msg_page & HV_SYNIC_SIMP_ENABLE))
+		return -ENOENT;
+
+	gpa = synic->msg_page & PAGE_MASK;
+	page = kvm_vcpu_gfn_to_page(vcpu, gpa >> PAGE_SHIFT);
+	if (is_error_page(page))
+		return -EFAULT;
+
+	msg_page = kmap_atomic(page);
+	dst_msg = &msg_page->sint_message[sint];
+	if (sync_cmpxchg(&dst_msg->header.message_type, HVMSG_NONE,
+			 src_msg->header.message_type) != HVMSG_NONE) {
+		dst_msg->header.message_flags.msg_pending = 1;
+		r = -EAGAIN;
+	} else {
+		memcpy(&dst_msg->u.payload, &src_msg->u.payload,
+		       src_msg->header.payload_size);
+		dst_msg->header.message_type = src_msg->header.message_type;
+		dst_msg->header.payload_size = src_msg->header.payload_size;
+		r = synic_set_irq(synic, sint);
+		if (r >= 1)
+			r = 0;
+		else if (r == 0)
+			r = -EFAULT;
+	}
+	kunmap_atomic(msg_page);
+	kvm_release_page_dirty(page);
+	kvm_vcpu_mark_page_dirty(vcpu, gpa >> PAGE_SHIFT);
+	return r;
+}
+
+static int stimer_send_msg(struct kvm_vcpu_hv_stimer *stimer)
+{
+	struct kvm_vcpu *vcpu = stimer_to_vcpu(stimer);
+	struct hv_message *msg = &stimer->msg;
+	struct hv_timer_message_payload *payload =
+			(struct hv_timer_message_payload *)&msg->u.payload;
+
+	payload->expiration_time = stimer->exp_time;
+	payload->delivery_time = get_time_ref_counter(vcpu->kvm);
+	return synic_deliver_msg(vcpu_to_synic(vcpu),
+				 HV_STIMER_SINT(stimer->config), msg);
+}
+
+static void stimer_expiration(struct kvm_vcpu_hv_stimer *stimer)
+{
+	int r;
+
+	stimer->msg_pending = true;
+	r = stimer_send_msg(stimer);
+	trace_kvm_hv_stimer_expiration(stimer_to_vcpu(stimer)->vcpu_id,
+				       stimer->index, r);
+	if (!r) {
+		stimer->msg_pending = false;
+		if (!(stimer->config & HV_STIMER_PERIODIC))
+			stimer->config &= ~HV_STIMER_ENABLE;
+	}
+}
+
+void kvm_hv_process_stimers(struct kvm_vcpu *vcpu)
+{
+	struct kvm_vcpu_hv *hv_vcpu = vcpu_to_hv_vcpu(vcpu);
+	struct kvm_vcpu_hv_stimer *stimer;
+	u64 time_now, exp_time;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hv_vcpu->stimer); i++)
+		if (test_and_clear_bit(i, hv_vcpu->stimer_pending_bitmap)) {
+			stimer = &hv_vcpu->stimer[i];
+			if (stimer->config & HV_STIMER_ENABLE) {
+				exp_time = stimer->exp_time;
+
+				if (exp_time) {
+					time_now =
+						get_time_ref_counter(vcpu->kvm);
+					if (time_now >= exp_time)
+						stimer_expiration(stimer);
+				}
+
+				if ((stimer->config & HV_STIMER_ENABLE) &&
+				    stimer->count)
+					stimer_start(stimer);
+				else
+					stimer_cleanup(stimer);
+			}
+		}
+}
+
+void kvm_hv_vcpu_uninit(struct kvm_vcpu *vcpu)
+{
+	struct kvm_vcpu_hv *hv_vcpu = vcpu_to_hv_vcpu(vcpu);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hv_vcpu->stimer); i++)
+		stimer_cleanup(&hv_vcpu->stimer[i]);
+}
+
+static void stimer_prepare_msg(struct kvm_vcpu_hv_stimer *stimer)
+{
+	struct hv_message *msg = &stimer->msg;
+	struct hv_timer_message_payload *payload =
+			(struct hv_timer_message_payload *)&msg->u.payload;
+
+	memset(&msg->header, 0, sizeof(msg->header));
+	msg->header.message_type = HVMSG_TIMER_EXPIRED;
+	msg->header.payload_size = sizeof(*payload);
+
+	payload->timer_index = stimer->index;
+	payload->expiration_time = 0;
+	payload->delivery_time = 0;
+}
+
+static void stimer_init(struct kvm_vcpu_hv_stimer *stimer, int timer_index)
+{
+	memset(stimer, 0, sizeof(*stimer));
+	stimer->index = timer_index;
+	hrtimer_init(&stimer->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	stimer->timer.function = stimer_timer_callback;
+	stimer_prepare_msg(stimer);
+}
+
+void kvm_hv_vcpu_init(struct kvm_vcpu *vcpu)
+{
+	struct kvm_vcpu_hv *hv_vcpu = vcpu_to_hv_vcpu(vcpu);
+	int i;
+
+	synic_init(&hv_vcpu->synic);
+
+	bitmap_zero(hv_vcpu->stimer_pending_bitmap, HV_SYNIC_STIMER_COUNT);
+	for (i = 0; i < ARRAY_SIZE(hv_vcpu->stimer); i++)
+		stimer_init(&hv_vcpu->stimer[i], i);
+}
+
+int kvm_hv_activate_synic(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Hyper-V SynIC auto EOI SINT's are
+	 * not compatible with APICV, so deactivate APICV
+	 */
+	kvm_vcpu_deactivate_apicv(vcpu);
+	vcpu_to_synic(vcpu)->active = true;
+	return 0;
+}
+
 static bool kvm_hv_msr_partition_wide(u32 msr)
 {
 	bool r = false;
@@ -226,6 +878,31 @@ static int kvm_hv_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host)
 			return 1;
 		hv->runtime_offset = data - current_task_runtime_100ns();
 		break;
+	case HV_X64_MSR_SCONTROL:
+	case HV_X64_MSR_SVERSION:
+	case HV_X64_MSR_SIEFP:
+	case HV_X64_MSR_SIMP:
+	case HV_X64_MSR_EOM:
+	case HV_X64_MSR_SINT0 ... HV_X64_MSR_SINT15:
+		return synic_set_msr(vcpu_to_synic(vcpu), msr, data, host);
+	case HV_X64_MSR_STIMER0_CONFIG:
+	case HV_X64_MSR_STIMER1_CONFIG:
+	case HV_X64_MSR_STIMER2_CONFIG:
+	case HV_X64_MSR_STIMER3_CONFIG: {
+		int timer_index = (msr - HV_X64_MSR_STIMER0_CONFIG)/2;
+
+		return stimer_set_config(vcpu_to_stimer(vcpu, timer_index),
+					 data, host);
+	}
+	case HV_X64_MSR_STIMER0_COUNT:
+	case HV_X64_MSR_STIMER1_COUNT:
+	case HV_X64_MSR_STIMER2_COUNT:
+	case HV_X64_MSR_STIMER3_COUNT: {
+		int timer_index = (msr - HV_X64_MSR_STIMER0_COUNT)/2;
+
+		return stimer_set_count(vcpu_to_stimer(vcpu, timer_index),
+					data, host);
+	}
 	default:
 		vcpu_unimpl(vcpu, "Hyper-V uhandled wrmsr: 0x%x data 0x%llx\n",
 			    msr, data);
@@ -248,11 +925,9 @@ static int kvm_hv_get_msr_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case HV_X64_MSR_HYPERCALL:
 		data = hv->hv_hypercall;
 		break;
-	case HV_X64_MSR_TIME_REF_COUNT: {
-		data =
-		     div_u64(get_kernel_ns() + kvm->arch.kvmclock_offset, 100);
+	case HV_X64_MSR_TIME_REF_COUNT:
+		data = get_time_ref_counter(kvm);
 		break;
-	}
 	case HV_X64_MSR_REFERENCE_TSC:
 		data = hv->hv_tsc_page;
 		break;
@@ -304,6 +979,31 @@ static int kvm_hv_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case HV_X64_MSR_VP_RUNTIME:
 		data = current_task_runtime_100ns() + hv->runtime_offset;
 		break;
+	case HV_X64_MSR_SCONTROL:
+	case HV_X64_MSR_SVERSION:
+	case HV_X64_MSR_SIEFP:
+	case HV_X64_MSR_SIMP:
+	case HV_X64_MSR_EOM:
+	case HV_X64_MSR_SINT0 ... HV_X64_MSR_SINT15:
+		return synic_get_msr(vcpu_to_synic(vcpu), msr, pdata);
+	case HV_X64_MSR_STIMER0_CONFIG:
+	case HV_X64_MSR_STIMER1_CONFIG:
+	case HV_X64_MSR_STIMER2_CONFIG:
+	case HV_X64_MSR_STIMER3_CONFIG: {
+		int timer_index = (msr - HV_X64_MSR_STIMER0_CONFIG)/2;
+
+		return stimer_get_config(vcpu_to_stimer(vcpu, timer_index),
+					 pdata);
+	}
+	case HV_X64_MSR_STIMER0_COUNT:
+	case HV_X64_MSR_STIMER1_COUNT:
+	case HV_X64_MSR_STIMER2_COUNT:
+	case HV_X64_MSR_STIMER3_COUNT: {
+		int timer_index = (msr - HV_X64_MSR_STIMER0_COUNT)/2;
+
+		return stimer_get_count(vcpu_to_stimer(vcpu, timer_index),
+					pdata);
+	}
 	default:
 		vcpu_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
 		return 1;
@@ -343,6 +1043,27 @@ bool kvm_hv_hypercall_enabled(struct kvm *kvm)
 	return kvm->arch.hyperv.hv_hypercall & HV_X64_MSR_HYPERCALL_ENABLE;
 }
 
+static void kvm_hv_hypercall_set_result(struct kvm_vcpu *vcpu, u64 result)
+{
+	bool longmode;
+
+	longmode = is_64_bit_mode(vcpu);
+	if (longmode)
+		kvm_register_write(vcpu, VCPU_REGS_RAX, result);
+	else {
+		kvm_register_write(vcpu, VCPU_REGS_RDX, result >> 32);
+		kvm_register_write(vcpu, VCPU_REGS_RAX, result & 0xffffffff);
+	}
+}
+
+static int kvm_hv_hypercall_complete_userspace(struct kvm_vcpu *vcpu)
+{
+	struct kvm_run *run = vcpu->run;
+
+	kvm_hv_hypercall_set_result(vcpu, run->hyperv.u.hcall.result);
+	return 1;
+}
+
 int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
 {
 	u64 param, ingpa, outgpa, ret;
@@ -355,7 +1076,7 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
 	 */
 	if (kvm_x86_ops->get_cpl(vcpu) != 0 || !is_protmode(vcpu)) {
 		kvm_queue_exception(vcpu, UD_VECTOR);
-		return 0;
+		return 1;
 	}
 
 	longmode = is_64_bit_mode(vcpu);
@@ -383,22 +1104,38 @@ int kvm_hv_hypercall(struct kvm_vcpu *vcpu)
 
 	trace_kvm_hv_hypercall(code, fast, rep_cnt, rep_idx, ingpa, outgpa);
 
+	/* Hypercall continuation is not supported yet */
+	if (rep_cnt || rep_idx) {
+		res = HV_STATUS_INVALID_HYPERCALL_CODE;
+		goto set_result;
+	}
+
 	switch (code) {
-	case HV_X64_HV_NOTIFY_LONG_SPIN_WAIT:
+	case HVCALL_NOTIFY_LONG_SPIN_WAIT:
 		kvm_vcpu_on_spin(vcpu);
 		break;
+	case HVCALL_POST_MESSAGE:
+	case HVCALL_SIGNAL_EVENT:
+		/* don't bother userspace if it has no way to handle it */
+		if (!vcpu_to_synic(vcpu)->active) {
+			res = HV_STATUS_INVALID_HYPERCALL_CODE;
+			break;
+		}
+		vcpu->run->exit_reason = KVM_EXIT_HYPERV;
+		vcpu->run->hyperv.type = KVM_EXIT_HYPERV_HCALL;
+		vcpu->run->hyperv.u.hcall.input = param;
+		vcpu->run->hyperv.u.hcall.params[0] = ingpa;
+		vcpu->run->hyperv.u.hcall.params[1] = outgpa;
+		vcpu->arch.complete_userspace_io =
+				kvm_hv_hypercall_complete_userspace;
+		return 0;
 	default:
 		res = HV_STATUS_INVALID_HYPERCALL_CODE;
 		break;
 	}
 
+set_result:
 	ret = res | (((u64)rep_done & 0xfff) << 32);
-	if (longmode) {
-		kvm_register_write(vcpu, VCPU_REGS_RAX, ret);
-	} else {
-		kvm_register_write(vcpu, VCPU_REGS_RDX, ret >> 32);
-		kvm_register_write(vcpu, VCPU_REGS_RAX, ret & 0xffffffff);
-	}
-
+	kvm_hv_hypercall_set_result(vcpu, ret);
 	return 1;
 }
diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h
index c7bce559f67b..60eccd4bd1d3 100644
--- a/arch/x86/kvm/hyperv.h
+++ b/arch/x86/kvm/hyperv.h
@@ -24,9 +24,64 @@
 #ifndef __ARCH_X86_KVM_HYPERV_H__
 #define __ARCH_X86_KVM_HYPERV_H__
 
+static inline struct kvm_vcpu_hv *vcpu_to_hv_vcpu(struct kvm_vcpu *vcpu)
+{
+	return &vcpu->arch.hyperv;
+}
+
+static inline struct kvm_vcpu *hv_vcpu_to_vcpu(struct kvm_vcpu_hv *hv_vcpu)
+{
+	struct kvm_vcpu_arch *arch;
+
+	arch = container_of(hv_vcpu, struct kvm_vcpu_arch, hyperv);
+	return container_of(arch, struct kvm_vcpu, arch);
+}
+
+static inline struct kvm_vcpu_hv_synic *vcpu_to_synic(struct kvm_vcpu *vcpu)
+{
+	return &vcpu->arch.hyperv.synic;
+}
+
+static inline struct kvm_vcpu *synic_to_vcpu(struct kvm_vcpu_hv_synic *synic)
+{
+	return hv_vcpu_to_vcpu(container_of(synic, struct kvm_vcpu_hv, synic));
+}
+
 int kvm_hv_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data, bool host);
 int kvm_hv_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
+
 bool kvm_hv_hypercall_enabled(struct kvm *kvm);
 int kvm_hv_hypercall(struct kvm_vcpu *vcpu);
 
+void kvm_hv_irq_routing_update(struct kvm *kvm);
+int kvm_hv_synic_set_irq(struct kvm *kvm, u32 vcpu_id, u32 sint);
+void kvm_hv_synic_send_eoi(struct kvm_vcpu *vcpu, int vector);
+int kvm_hv_activate_synic(struct kvm_vcpu *vcpu);
+
+void kvm_hv_vcpu_init(struct kvm_vcpu *vcpu);
+void kvm_hv_vcpu_uninit(struct kvm_vcpu *vcpu);
+
+static inline struct kvm_vcpu_hv_stimer *vcpu_to_stimer(struct kvm_vcpu *vcpu,
+							int timer_index)
+{
+	return &vcpu_to_hv_vcpu(vcpu)->stimer[timer_index];
+}
+
+static inline struct kvm_vcpu *stimer_to_vcpu(struct kvm_vcpu_hv_stimer *stimer)
+{
+	struct kvm_vcpu_hv *hv_vcpu;
+
+	hv_vcpu = container_of(stimer - stimer->index, struct kvm_vcpu_hv,
+			       stimer[0]);
+	return hv_vcpu_to_vcpu(hv_vcpu);
+}
+
+static inline bool kvm_hv_has_stimer_pending(struct kvm_vcpu *vcpu)
+{
+	return !bitmap_empty(vcpu->arch.hyperv.stimer_pending_bitmap,
+			     HV_SYNIC_STIMER_COUNT);
+}
+
+void kvm_hv_process_stimers(struct kvm_vcpu *vcpu);
+
 #endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 08116ff227cc..a4bf5b45d65a 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -51,32 +51,9 @@
 #define RW_STATE_WORD0 3
 #define RW_STATE_WORD1 4
 
-/* Compute with 96 bit intermediate result: (a*b)/c */
-static u64 muldiv64(u64 a, u32 b, u32 c)
+static void pit_set_gate(struct kvm_pit *pit, int channel, u32 val)
 {
-	union {
-		u64 ll;
-		struct {
-			u32 low, high;
-		} l;
-	} u, res;
-	u64 rl, rh;
-
-	u.ll = a;
-	rl = (u64)u.l.low * (u64)b;
-	rh = (u64)u.l.high * (u64)b;
-	rh += (rl >> 32);
-	res.l.high = div64_u64(rh, c);
-	res.l.low = div64_u64(((mod_64(rh, c) << 32) + (rl & 0xffffffff)), c);
-	return res.ll;
-}
-
-static void pit_set_gate(struct kvm *kvm, int channel, u32 val)
-{
-	struct kvm_kpit_channel_state *c =
-		&kvm->arch.vpit->pit_state.channels[channel];
-
-	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
+	struct kvm_kpit_channel_state *c = &pit->pit_state.channels[channel];
 
 	switch (c->mode) {
 	default:
@@ -97,18 +74,16 @@ static void pit_set_gate(struct kvm *kvm, int channel, u32 val)
 	c->gate = val;
 }
 
-static int pit_get_gate(struct kvm *kvm, int channel)
+static int pit_get_gate(struct kvm_pit *pit, int channel)
 {
-	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
-
-	return kvm->arch.vpit->pit_state.channels[channel].gate;
+	return pit->pit_state.channels[channel].gate;
 }
 
-static s64 __kpit_elapsed(struct kvm *kvm)
+static s64 __kpit_elapsed(struct kvm_pit *pit)
 {
 	s64 elapsed;
 	ktime_t remaining;
-	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
+	struct kvm_kpit_state *ps = &pit->pit_state;
 
 	if (!ps->period)
 		return 0;
@@ -128,26 +103,23 @@ static s64 __kpit_elapsed(struct kvm *kvm)
 	return elapsed;
 }
 
-static s64 kpit_elapsed(struct kvm *kvm, struct kvm_kpit_channel_state *c,
+static s64 kpit_elapsed(struct kvm_pit *pit, struct kvm_kpit_channel_state *c,
 			int channel)
 {
 	if (channel == 0)
-		return __kpit_elapsed(kvm);
+		return __kpit_elapsed(pit);
 
 	return ktime_to_ns(ktime_sub(ktime_get(), c->count_load_time));
 }
 
-static int pit_get_count(struct kvm *kvm, int channel)
+static int pit_get_count(struct kvm_pit *pit, int channel)
 {
-	struct kvm_kpit_channel_state *c =
-		&kvm->arch.vpit->pit_state.channels[channel];
+	struct kvm_kpit_channel_state *c = &pit->pit_state.channels[channel];
 	s64 d, t;
 	int counter;
 
-	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
-
-	t = kpit_elapsed(kvm, c, channel);
-	d = muldiv64(t, KVM_PIT_FREQ, NSEC_PER_SEC);
+	t = kpit_elapsed(pit, c, channel);
+	d = mul_u64_u32_div(t, KVM_PIT_FREQ, NSEC_PER_SEC);
 
 	switch (c->mode) {
 	case 0:
@@ -167,17 +139,14 @@ static int pit_get_count(struct kvm *kvm, int channel)
 	return counter;
 }
 
-static int pit_get_out(struct kvm *kvm, int channel)
+static int pit_get_out(struct kvm_pit *pit, int channel)
 {
-	struct kvm_kpit_channel_state *c =
-		&kvm->arch.vpit->pit_state.channels[channel];
+	struct kvm_kpit_channel_state *c = &pit->pit_state.channels[channel];
 	s64 d, t;
 	int out;
 
-	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
-
-	t = kpit_elapsed(kvm, c, channel);
-	d = muldiv64(t, KVM_PIT_FREQ, NSEC_PER_SEC);
+	t = kpit_elapsed(pit, c, channel);
+	d = mul_u64_u32_div(t, KVM_PIT_FREQ, NSEC_PER_SEC);
 
 	switch (c->mode) {
 	default:
@@ -202,29 +171,23 @@ static int pit_get_out(struct kvm *kvm, int channel)
 	return out;
 }
 
-static void pit_latch_count(struct kvm *kvm, int channel)
+static void pit_latch_count(struct kvm_pit *pit, int channel)
 {
-	struct kvm_kpit_channel_state *c =
-		&kvm->arch.vpit->pit_state.channels[channel];
-
-	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
+	struct kvm_kpit_channel_state *c = &pit->pit_state.channels[channel];
 
 	if (!c->count_latched) {
-		c->latched_count = pit_get_count(kvm, channel);
+		c->latched_count = pit_get_count(pit, channel);
 		c->count_latched = c->rw_mode;
 	}
 }
 
-static void pit_latch_status(struct kvm *kvm, int channel)
+static void pit_latch_status(struct kvm_pit *pit, int channel)
 {
-	struct kvm_kpit_channel_state *c =
-		&kvm->arch.vpit->pit_state.channels[channel];
-
-	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
+	struct kvm_kpit_channel_state *c = &pit->pit_state.channels[channel];
 
 	if (!c->status_latched) {
 		/* TODO: Return NULL COUNT (bit 6). */
-		c->status = ((pit_get_out(kvm, channel) << 7) |
+		c->status = ((pit_get_out(pit, channel) << 7) |
 				(c->rw_mode << 4) |
 				(c->mode << 1) |
 				c->bcd);
@@ -232,26 +195,24 @@ static void pit_latch_status(struct kvm *kvm, int channel)
 	}
 }
 
+static inline struct kvm_pit *pit_state_to_pit(struct kvm_kpit_state *ps)
+{
+	return container_of(ps, struct kvm_pit, pit_state);
+}
+
 static void kvm_pit_ack_irq(struct kvm_irq_ack_notifier *kian)
 {
 	struct kvm_kpit_state *ps = container_of(kian, struct kvm_kpit_state,
 						 irq_ack_notifier);
-	int value;
-
-	spin_lock(&ps->inject_lock);
-	value = atomic_dec_return(&ps->pending);
-	if (value < 0)
-		/* spurious acks can be generated if, for example, the
-		 * PIC is being reset.  Handle it gracefully here
-		 */
-		atomic_inc(&ps->pending);
-	else if (value > 0)
-		/* in this case, we had multiple outstanding pit interrupts
-		 * that we needed to inject.  Reinject
-		 */
-		queue_kthread_work(&ps->pit->worker, &ps->pit->expired);
-	ps->irq_ack = 1;
-	spin_unlock(&ps->inject_lock);
+	struct kvm_pit *pit = pit_state_to_pit(ps);
+
+	atomic_set(&ps->irq_ack, 1);
+	/* irq_ack should be set before pending is read.  Order accesses with
+	 * inc(pending) in pit_timer_fn and xchg(irq_ack, 0) in pit_do_work.
+	 */
+	smp_mb();
+	if (atomic_dec_if_positive(&ps->pending) > 0)
+		queue_kthread_work(&pit->worker, &pit->expired);
 }
 
 void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
@@ -282,45 +243,36 @@ static void pit_do_work(struct kthread_work *work)
 	struct kvm_vcpu *vcpu;
 	int i;
 	struct kvm_kpit_state *ps = &pit->pit_state;
-	int inject = 0;
 
-	/* Try to inject pending interrupts when
-	 * last one has been acked.
+	if (atomic_read(&ps->reinject) && !atomic_xchg(&ps->irq_ack, 0))
+		return;
+
+	kvm_set_irq(kvm, pit->irq_source_id, 0, 1, false);
+	kvm_set_irq(kvm, pit->irq_source_id, 0, 0, false);
+
+	/*
+	 * Provides NMI watchdog support via Virtual Wire mode.
+	 * The route is: PIT -> LVT0 in NMI mode.
+	 *
+	 * Note: Our Virtual Wire implementation does not follow
+	 * the MP specification.  We propagate a PIT interrupt to all
+	 * VCPUs and only when LVT0 is in NMI mode.  The interrupt can
+	 * also be simultaneously delivered through PIC and IOAPIC.
 	 */
-	spin_lock(&ps->inject_lock);
-	if (ps->irq_ack) {
-		ps->irq_ack = 0;
-		inject = 1;
-	}
-	spin_unlock(&ps->inject_lock);
-	if (inject) {
-		kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1, false);
-		kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0, false);
-
-		/*
-		 * Provides NMI watchdog support via Virtual Wire mode.
-		 * The route is: PIT -> PIC -> LVT0 in NMI mode.
-		 *
-		 * Note: Our Virtual Wire implementation is simplified, only
-		 * propagating PIT interrupts to all VCPUs when they have set
-		 * LVT0 to NMI delivery. Other PIC interrupts are just sent to
-		 * VCPU0, and only if its LVT0 is in EXTINT mode.
-		 */
-		if (atomic_read(&kvm->arch.vapics_in_nmi_mode) > 0)
-			kvm_for_each_vcpu(i, vcpu, kvm)
-				kvm_apic_nmi_wd_deliver(vcpu);
-	}
+	if (atomic_read(&kvm->arch.vapics_in_nmi_mode) > 0)
+		kvm_for_each_vcpu(i, vcpu, kvm)
+			kvm_apic_nmi_wd_deliver(vcpu);
 }
 
 static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 {
 	struct kvm_kpit_state *ps = container_of(data, struct kvm_kpit_state, timer);
-	struct kvm_pit *pt = ps->kvm->arch.vpit;
+	struct kvm_pit *pt = pit_state_to_pit(ps);
 
-	if (ps->reinject || !atomic_read(&ps->pending)) {
+	if (atomic_read(&ps->reinject))
 		atomic_inc(&ps->pending);
-		queue_kthread_work(&pt->worker, &pt->expired);
-	}
+
+	queue_kthread_work(&pt->worker, &pt->expired);
 
 	if (ps->is_periodic) {
 		hrtimer_add_expires_ns(&ps->timer, ps->period);
@@ -329,30 +281,54 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data)
 		return HRTIMER_NORESTART;
 }
 
-static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
+static inline void kvm_pit_reset_reinject(struct kvm_pit *pit)
 {
-	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
+	atomic_set(&pit->pit_state.pending, 0);
+	atomic_set(&pit->pit_state.irq_ack, 1);
+}
+
+void kvm_pit_set_reinject(struct kvm_pit *pit, bool reinject)
+{
+	struct kvm_kpit_state *ps = &pit->pit_state;
+	struct kvm *kvm = pit->kvm;
+
+	if (atomic_read(&ps->reinject) == reinject)
+		return;
+
+	if (reinject) {
+		/* The initial state is preserved while ps->reinject == 0. */
+		kvm_pit_reset_reinject(pit);
+		kvm_register_irq_ack_notifier(kvm, &ps->irq_ack_notifier);
+		kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
+	} else {
+		kvm_unregister_irq_ack_notifier(kvm, &ps->irq_ack_notifier);
+		kvm_unregister_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
+	}
+
+	atomic_set(&ps->reinject, reinject);
+}
+
+static void create_pit_timer(struct kvm_pit *pit, u32 val, int is_period)
+{
+	struct kvm_kpit_state *ps = &pit->pit_state;
+	struct kvm *kvm = pit->kvm;
 	s64 interval;
 
 	if (!ioapic_in_kernel(kvm) ||
 	    ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)
 		return;
 
-	interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ);
+	interval = mul_u64_u32_div(val, NSEC_PER_SEC, KVM_PIT_FREQ);
 
 	pr_debug("create pit timer, interval is %llu nsec\n", interval);
 
 	/* TODO The new value only affected after the retriggered */
 	hrtimer_cancel(&ps->timer);
-	flush_kthread_work(&ps->pit->expired);
+	flush_kthread_work(&pit->expired);
 	ps->period = interval;
 	ps->is_periodic = is_period;
 
-	ps->timer.function = pit_timer_fn;
-	ps->kvm = ps->pit->kvm;
-
-	atomic_set(&ps->pending, 0);
-	ps->irq_ack = 1;
+	kvm_pit_reset_reinject(pit);
 
 	/*
 	 * Do not allow the guest to program periodic timers with small
@@ -375,11 +351,9 @@ static void create_pit_timer(struct kvm *kvm, u32 val, int is_period)
 		      HRTIMER_MODE_ABS);
 }
 
-static void pit_load_count(struct kvm *kvm, int channel, u32 val)
+static void pit_load_count(struct kvm_pit *pit, int channel, u32 val)
 {
-	struct kvm_kpit_state *ps = &kvm->arch.vpit->pit_state;
-
-	WARN_ON(!mutex_is_locked(&ps->lock));
+	struct kvm_kpit_state *ps = &pit->pit_state;
 
 	pr_debug("load_count val is %d, channel is %d\n", val, channel);
 
@@ -404,28 +378,33 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 	case 1:
         /* FIXME: enhance mode 4 precision */
 	case 4:
-		create_pit_timer(kvm, val, 0);
+		create_pit_timer(pit, val, 0);
 		break;
 	case 2:
 	case 3:
-		create_pit_timer(kvm, val, 1);
+		create_pit_timer(pit, val, 1);
 		break;
 	default:
-		destroy_pit_timer(kvm->arch.vpit);
+		destroy_pit_timer(pit);
 	}
 }
 
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start)
+void kvm_pit_load_count(struct kvm_pit *pit, int channel, u32 val,
+		int hpet_legacy_start)
 {
 	u8 saved_mode;
+
+	WARN_ON_ONCE(!mutex_is_locked(&pit->pit_state.lock));
+
 	if (hpet_legacy_start) {
 		/* save existing mode for later reenablement */
-		saved_mode = kvm->arch.vpit->pit_state.channels[0].mode;
-		kvm->arch.vpit->pit_state.channels[0].mode = 0xff; /* disable timer */
-		pit_load_count(kvm, channel, val);
-		kvm->arch.vpit->pit_state.channels[0].mode = saved_mode;
+		WARN_ON(channel != 0);
+		saved_mode = pit->pit_state.channels[0].mode;
+		pit->pit_state.channels[0].mode = 0xff; /* disable timer */
+		pit_load_count(pit, channel, val);
+		pit->pit_state.channels[0].mode = saved_mode;
 	} else {
-		pit_load_count(kvm, channel, val);
+		pit_load_count(pit, channel, val);
 	}
 }
 
@@ -451,7 +430,6 @@ static int pit_ioport_write(struct kvm_vcpu *vcpu,
 {
 	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
-	struct kvm *kvm = pit->kvm;
 	int channel, access;
 	struct kvm_kpit_channel_state *s;
 	u32 val = *(u32 *) data;
@@ -475,9 +453,9 @@ static int pit_ioport_write(struct kvm_vcpu *vcpu,
 				s = &pit_state->channels[channel];
 				if (val & (2 << channel)) {
 					if (!(val & 0x20))
-						pit_latch_count(kvm, channel);
+						pit_latch_count(pit, channel);
 					if (!(val & 0x10))
-						pit_latch_status(kvm, channel);
+						pit_latch_status(pit, channel);
 				}
 			}
 		} else {
@@ -485,7 +463,7 @@ static int pit_ioport_write(struct kvm_vcpu *vcpu,
 			s = &pit_state->channels[channel];
 			access = (val >> 4) & KVM_PIT_CHANNEL_MASK;
 			if (access == 0) {
-				pit_latch_count(kvm, channel);
+				pit_latch_count(pit, channel);
 			} else {
 				s->rw_mode = access;
 				s->read_state = access;
@@ -502,17 +480,17 @@ static int pit_ioport_write(struct kvm_vcpu *vcpu,
 		switch (s->write_state) {
 		default:
 		case RW_STATE_LSB:
-			pit_load_count(kvm, addr, val);
+			pit_load_count(pit, addr, val);
 			break;
 		case RW_STATE_MSB:
-			pit_load_count(kvm, addr, val << 8);
+			pit_load_count(pit, addr, val << 8);
 			break;
 		case RW_STATE_WORD0:
 			s->write_latch = val;
 			s->write_state = RW_STATE_WORD1;
 			break;
 		case RW_STATE_WORD1:
-			pit_load_count(kvm, addr, s->write_latch | (val << 8));
+			pit_load_count(pit, addr, s->write_latch | (val << 8));
 			s->write_state = RW_STATE_WORD0;
 			break;
 		}
@@ -528,7 +506,6 @@ static int pit_ioport_read(struct kvm_vcpu *vcpu,
 {
 	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
-	struct kvm *kvm = pit->kvm;
 	int ret, count;
 	struct kvm_kpit_channel_state *s;
 	if (!pit_in_range(addr))
@@ -565,20 +542,20 @@ static int pit_ioport_read(struct kvm_vcpu *vcpu,
 		switch (s->read_state) {
 		default:
 		case RW_STATE_LSB:
-			count = pit_get_count(kvm, addr);
+			count = pit_get_count(pit, addr);
 			ret = count & 0xff;
 			break;
 		case RW_STATE_MSB:
-			count = pit_get_count(kvm, addr);
+			count = pit_get_count(pit, addr);
 			ret = (count >> 8) & 0xff;
 			break;
 		case RW_STATE_WORD0:
-			count = pit_get_count(kvm, addr);
+			count = pit_get_count(pit, addr);
 			ret = count & 0xff;
 			s->read_state = RW_STATE_WORD1;
 			break;
 		case RW_STATE_WORD1:
-			count = pit_get_count(kvm, addr);
+			count = pit_get_count(pit, addr);
 			ret = (count >> 8) & 0xff;
 			s->read_state = RW_STATE_WORD0;
 			break;
@@ -599,14 +576,13 @@ static int speaker_ioport_write(struct kvm_vcpu *vcpu,
 {
 	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
-	struct kvm *kvm = pit->kvm;
 	u32 val = *(u32 *) data;
 	if (addr != KVM_SPEAKER_BASE_ADDRESS)
 		return -EOPNOTSUPP;
 
 	mutex_lock(&pit_state->lock);
 	pit_state->speaker_data_on = (val >> 1) & 1;
-	pit_set_gate(kvm, 2, val & 1);
+	pit_set_gate(pit, 2, val & 1);
 	mutex_unlock(&pit_state->lock);
 	return 0;
 }
@@ -617,7 +593,6 @@ static int speaker_ioport_read(struct kvm_vcpu *vcpu,
 {
 	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
-	struct kvm *kvm = pit->kvm;
 	unsigned int refresh_clock;
 	int ret;
 	if (addr != KVM_SPEAKER_BASE_ADDRESS)
@@ -627,8 +602,8 @@ static int speaker_ioport_read(struct kvm_vcpu *vcpu,
 	refresh_clock = ((unsigned int)ktime_to_ns(ktime_get()) >> 14) & 1;
 
 	mutex_lock(&pit_state->lock);
-	ret = ((pit_state->speaker_data_on << 1) | pit_get_gate(kvm, 2) |
-		(pit_get_out(kvm, 2) << 5) | (refresh_clock << 4));
+	ret = ((pit_state->speaker_data_on << 1) | pit_get_gate(pit, 2) |
+		(pit_get_out(pit, 2) << 5) | (refresh_clock << 4));
 	if (len > sizeof(ret))
 		len = sizeof(ret);
 	memcpy(data, (char *)&ret, len);
@@ -636,33 +611,28 @@ static int speaker_ioport_read(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-void kvm_pit_reset(struct kvm_pit *pit)
+static void kvm_pit_reset(struct kvm_pit *pit)
 {
 	int i;
 	struct kvm_kpit_channel_state *c;
 
-	mutex_lock(&pit->pit_state.lock);
 	pit->pit_state.flags = 0;
 	for (i = 0; i < 3; i++) {
 		c = &pit->pit_state.channels[i];
 		c->mode = 0xff;
 		c->gate = (i != 2);
-		pit_load_count(pit->kvm, i, 0);
+		pit_load_count(pit, i, 0);
 	}
-	mutex_unlock(&pit->pit_state.lock);
 
-	atomic_set(&pit->pit_state.pending, 0);
-	pit->pit_state.irq_ack = 1;
+	kvm_pit_reset_reinject(pit);
 }
 
 static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 {
 	struct kvm_pit *pit = container_of(kimn, struct kvm_pit, mask_notifier);
 
-	if (!mask) {
-		atomic_set(&pit->pit_state.pending, 0);
-		pit->pit_state.irq_ack = 1;
-	}
+	if (!mask)
+		kvm_pit_reset_reinject(pit);
 }
 
 static const struct kvm_io_device_ops pit_dev_ops = {
@@ -689,14 +659,10 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 		return NULL;
 
 	pit->irq_source_id = kvm_request_irq_source_id(kvm);
-	if (pit->irq_source_id < 0) {
-		kfree(pit);
-		return NULL;
-	}
+	if (pit->irq_source_id < 0)
+		goto fail_request;
 
 	mutex_init(&pit->pit_state.lock);
-	mutex_lock(&pit->pit_state.lock);
-	spin_lock_init(&pit->pit_state.inject_lock);
 
 	pid = get_pid(task_tgid(current));
 	pid_nr = pid_vnr(pid);
@@ -705,36 +671,30 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	init_kthread_worker(&pit->worker);
 	pit->worker_task = kthread_run(kthread_worker_fn, &pit->worker,
 				       "kvm-pit/%d", pid_nr);
-	if (IS_ERR(pit->worker_task)) {
-		mutex_unlock(&pit->pit_state.lock);
-		kvm_free_irq_source_id(kvm, pit->irq_source_id);
-		kfree(pit);
-		return NULL;
-	}
+	if (IS_ERR(pit->worker_task))
+		goto fail_kthread;
+
 	init_kthread_work(&pit->expired, pit_do_work);
 
-	kvm->arch.vpit = pit;
 	pit->kvm = kvm;
 
 	pit_state = &pit->pit_state;
-	pit_state->pit = pit;
 	hrtimer_init(&pit_state->timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+	pit_state->timer.function = pit_timer_fn;
+
 	pit_state->irq_ack_notifier.gsi = 0;
 	pit_state->irq_ack_notifier.irq_acked = kvm_pit_ack_irq;
-	kvm_register_irq_ack_notifier(kvm, &pit_state->irq_ack_notifier);
-	pit_state->reinject = true;
-	mutex_unlock(&pit->pit_state.lock);
+	pit->mask_notifier.func = pit_mask_notifer;
 
 	kvm_pit_reset(pit);
 
-	pit->mask_notifier.func = pit_mask_notifer;
-	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
+	kvm_pit_set_reinject(pit, true);
 
 	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
 	ret = kvm_io_bus_register_dev(kvm, KVM_PIO_BUS, KVM_PIT_BASE_ADDRESS,
 				      KVM_PIT_MEM_LENGTH, &pit->dev);
 	if (ret < 0)
-		goto fail;
+		goto fail_register_pit;
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
 		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
@@ -742,42 +702,35 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 					      KVM_SPEAKER_BASE_ADDRESS, 4,
 					      &pit->speaker_dev);
 		if (ret < 0)
-			goto fail_unregister;
+			goto fail_register_speaker;
 	}
 
 	return pit;
 
-fail_unregister:
+fail_register_speaker:
 	kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->dev);
-
-fail:
-	kvm_unregister_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
-	kvm_unregister_irq_ack_notifier(kvm, &pit_state->irq_ack_notifier);
-	kvm_free_irq_source_id(kvm, pit->irq_source_id);
+fail_register_pit:
+	kvm_pit_set_reinject(pit, false);
 	kthread_stop(pit->worker_task);
+fail_kthread:
+	kvm_free_irq_source_id(kvm, pit->irq_source_id);
+fail_request:
 	kfree(pit);
 	return NULL;
 }
 
 void kvm_free_pit(struct kvm *kvm)
 {
-	struct hrtimer *timer;
-
-	if (kvm->arch.vpit) {
-		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &kvm->arch.vpit->dev);
-		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS,
-					      &kvm->arch.vpit->speaker_dev);
-		kvm_unregister_irq_mask_notifier(kvm, 0,
-					       &kvm->arch.vpit->mask_notifier);
-		kvm_unregister_irq_ack_notifier(kvm,
-				&kvm->arch.vpit->pit_state.irq_ack_notifier);
-		mutex_lock(&kvm->arch.vpit->pit_state.lock);
-		timer = &kvm->arch.vpit->pit_state.timer;
-		hrtimer_cancel(timer);
-		flush_kthread_work(&kvm->arch.vpit->expired);
-		kthread_stop(kvm->arch.vpit->worker_task);
-		kvm_free_irq_source_id(kvm, kvm->arch.vpit->irq_source_id);
-		mutex_unlock(&kvm->arch.vpit->pit_state.lock);
-		kfree(kvm->arch.vpit);
+	struct kvm_pit *pit = kvm->arch.vpit;
+
+	if (pit) {
+		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->dev);
+		kvm_io_bus_unregister_dev(kvm, KVM_PIO_BUS, &pit->speaker_dev);
+		kvm_pit_set_reinject(pit, false);
+		hrtimer_cancel(&pit->pit_state.timer);
+		flush_kthread_work(&pit->expired);
+		kthread_stop(pit->worker_task);
+		kvm_free_irq_source_id(kvm, pit->irq_source_id);
+		kfree(pit);
 	}
 }
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index c84990b42b5b..2f5af0798326 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -22,19 +22,18 @@ struct kvm_kpit_channel_state {
 };
 
 struct kvm_kpit_state {
+	/* All members before "struct mutex lock" are protected by the lock. */
 	struct kvm_kpit_channel_state channels[3];
 	u32 flags;
 	bool is_periodic;
 	s64 period; 				/* unit: ns */
 	struct hrtimer timer;
-	atomic_t pending;			/* accumulated triggered timers */
-	bool reinject;
-	struct kvm *kvm;
 	u32    speaker_data_on;
+
 	struct mutex lock;
-	struct kvm_pit *pit;
-	spinlock_t inject_lock;
-	unsigned long irq_ack;
+	atomic_t reinject;
+	atomic_t pending; /* accumulated triggered timers */
+	atomic_t irq_ack;
 	struct kvm_irq_ack_notifier irq_ack_notifier;
 };
 
@@ -57,9 +56,11 @@ struct kvm_pit {
 #define KVM_MAX_PIT_INTR_INTERVAL   HZ / 100
 #define KVM_PIT_CHANNEL_MASK	    0x3
 
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start);
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags);
 void kvm_free_pit(struct kvm *kvm);
-void kvm_pit_reset(struct kvm_pit *pit);
+
+void kvm_pit_load_count(struct kvm_pit *pit, int channel, u32 val,
+		int hpet_legacy_start);
+void kvm_pit_set_reinject(struct kvm_pit *pit, bool reinject);
 
 #endif
diff --git a/arch/x86/kvm/ioapic.c b/arch/x86/kvm/ioapic.c
index 88d0a92d3f94..9db47090ead0 100644
--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -94,7 +94,7 @@ static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic,
 static void rtc_irq_eoi_tracking_reset(struct kvm_ioapic *ioapic)
 {
 	ioapic->rtc_status.pending_eoi = 0;
-	bitmap_zero(ioapic->rtc_status.dest_map, KVM_MAX_VCPUS);
+	bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPUS);
 }
 
 static void kvm_rtc_eoi_tracking_restore_all(struct kvm_ioapic *ioapic);
@@ -117,16 +117,16 @@ static void __rtc_irq_eoi_tracking_restore_one(struct kvm_vcpu *vcpu)
 		return;
 
 	new_val = kvm_apic_pending_eoi(vcpu, e->fields.vector);
-	old_val = test_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map);
+	old_val = test_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map.map);
 
 	if (new_val == old_val)
 		return;
 
 	if (new_val) {
-		__set_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map);
+		__set_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map.map);
 		ioapic->rtc_status.pending_eoi++;
 	} else {
-		__clear_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map);
+		__clear_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map.map);
 		ioapic->rtc_status.pending_eoi--;
 		rtc_status_pending_eoi_check_valid(ioapic);
 	}
@@ -156,7 +156,8 @@ static void kvm_rtc_eoi_tracking_restore_all(struct kvm_ioapic *ioapic)
 
 static void rtc_irq_eoi(struct kvm_ioapic *ioapic, struct kvm_vcpu *vcpu)
 {
-	if (test_and_clear_bit(vcpu->vcpu_id, ioapic->rtc_status.dest_map)) {
+	if (test_and_clear_bit(vcpu->vcpu_id,
+			       ioapic->rtc_status.dest_map.map)) {
 		--ioapic->rtc_status.pending_eoi;
 		rtc_status_pending_eoi_check_valid(ioapic);
 	}
@@ -233,13 +234,20 @@ static void kvm_ioapic_inject_all(struct kvm_ioapic *ioapic, unsigned long irr)
 }
 
 
-void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
+void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, ulong *ioapic_handled_vectors)
 {
 	struct kvm_ioapic *ioapic = vcpu->kvm->arch.vioapic;
+	struct dest_map *dest_map = &ioapic->rtc_status.dest_map;
 	union kvm_ioapic_redirect_entry *e;
 	int index;
 
 	spin_lock(&ioapic->lock);
+
+	/* Make sure we see any missing RTC EOI */
+	if (test_bit(vcpu->vcpu_id, dest_map->map))
+		__set_bit(dest_map->vectors[vcpu->vcpu_id],
+			  ioapic_handled_vectors);
+
 	for (index = 0; index < IOAPIC_NUM_PINS; index++) {
 		e = &ioapic->redirtbl[index];
 		if (e->fields.trig_mode == IOAPIC_LEVEL_TRIG ||
@@ -250,7 +258,7 @@ void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
 			    (e->fields.trig_mode == IOAPIC_EDGE_TRIG &&
 			     kvm_apic_pending_eoi(vcpu, e->fields.vector)))
 				__set_bit(e->fields.vector,
-					(unsigned long *)eoi_exit_bitmap);
+					  ioapic_handled_vectors);
 		}
 	}
 	spin_unlock(&ioapic->lock);
@@ -346,7 +354,7 @@ static int ioapic_service(struct kvm_ioapic *ioapic, int irq, bool line_status)
 		 */
 		BUG_ON(ioapic->rtc_status.pending_eoi != 0);
 		ret = kvm_irq_delivery_to_apic(ioapic->kvm, NULL, &irqe,
-				ioapic->rtc_status.dest_map);
+					       &ioapic->rtc_status.dest_map);
 		ioapic->rtc_status.pending_eoi = (ret < 0 ? 0 : ret);
 	} else
 		ret = kvm_irq_delivery_to_apic(ioapic->kvm, NULL, &irqe, NULL);
@@ -407,8 +415,14 @@ static void kvm_ioapic_eoi_inject_work(struct work_struct *work)
 static void __kvm_ioapic_update_eoi(struct kvm_vcpu *vcpu,
 			struct kvm_ioapic *ioapic, int vector, int trigger_mode)
 {
-	int i;
+	struct dest_map *dest_map = &ioapic->rtc_status.dest_map;
 	struct kvm_lapic *apic = vcpu->arch.apic;
+	int i;
+
+	/* RTC special handling */
+	if (test_bit(vcpu->vcpu_id, dest_map->map) &&
+	    vector == dest_map->vectors[vcpu->vcpu_id])
+		rtc_irq_eoi(ioapic, vcpu);
 
 	for (i = 0; i < IOAPIC_NUM_PINS; i++) {
 		union kvm_ioapic_redirect_entry *ent = &ioapic->redirtbl[i];
@@ -416,8 +430,6 @@ static void __kvm_ioapic_update_eoi(struct kvm_vcpu *vcpu,
 		if (ent->fields.vector != vector)
 			continue;
 
-		if (i == RTC_GSI)
-			rtc_irq_eoi(ioapic, vcpu);
 		/*
 		 * We are dropping lock while calling ack notifiers because ack
 		 * notifier callbacks for assigned devices call into IOAPIC
diff --git a/arch/x86/kvm/ioapic.h b/arch/x86/kvm/ioapic.h
index 084617d37c74..7d2692a49657 100644
--- a/arch/x86/kvm/ioapic.h
+++ b/arch/x86/kvm/ioapic.h
@@ -40,9 +40,21 @@ struct kvm_vcpu;
 #define RTC_GSI -1U
 #endif
 
+struct dest_map {
+	/* vcpu bitmap where IRQ has been sent */
+	DECLARE_BITMAP(map, KVM_MAX_VCPUS);
+
+	/*
+	 * Vector sent to a given vcpu, only valid when
+	 * the vcpu's bit in map is set
+	 */
+	u8 vectors[KVM_MAX_VCPUS];
+};
+
+
 struct rtc_status {
 	int pending_eoi;
-	DECLARE_BITMAP(dest_map, KVM_MAX_VCPUS);
+	struct dest_map dest_map;
 };
 
 union kvm_ioapic_redirect_entry {
@@ -118,10 +130,12 @@ int kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int irq_source_id,
 		       int level, bool line_status);
 void kvm_ioapic_clear_all(struct kvm_ioapic *ioapic, int irq_source_id);
 int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
-		struct kvm_lapic_irq *irq, unsigned long *dest_map);
+			     struct kvm_lapic_irq *irq,
+			     struct dest_map *dest_map);
 int kvm_get_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state);
 int kvm_set_ioapic(struct kvm *kvm, struct kvm_ioapic_state *state);
-void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
-void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
-
+void kvm_ioapic_scan_entry(struct kvm_vcpu *vcpu,
+			   ulong *ioapic_handled_vectors);
+void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu,
+			    ulong *ioapic_handled_vectors);
 #endif
diff --git a/arch/x86/kvm/iommu.c b/arch/x86/kvm/iommu.c
index 5c520ebf6343..a22a488b4622 100644
--- a/arch/x86/kvm/iommu.c
+++ b/arch/x86/kvm/iommu.c
@@ -43,11 +43,11 @@ static int kvm_iommu_unmap_memslots(struct kvm *kvm);
 static void kvm_iommu_put_pages(struct kvm *kvm,
 				gfn_t base_gfn, unsigned long npages);
 
-static pfn_t kvm_pin_pages(struct kvm_memory_slot *slot, gfn_t gfn,
+static kvm_pfn_t kvm_pin_pages(struct kvm_memory_slot *slot, gfn_t gfn,
 			   unsigned long npages)
 {
 	gfn_t end_gfn;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 
 	pfn     = gfn_to_pfn_memslot(slot, gfn);
 	end_gfn = gfn + npages;
@@ -62,7 +62,8 @@ static pfn_t kvm_pin_pages(struct kvm_memory_slot *slot, gfn_t gfn,
 	return pfn;
 }
 
-static void kvm_unpin_pages(struct kvm *kvm, pfn_t pfn, unsigned long npages)
+static void kvm_unpin_pages(struct kvm *kvm, kvm_pfn_t pfn,
+		unsigned long npages)
 {
 	unsigned long i;
 
@@ -73,7 +74,7 @@ static void kvm_unpin_pages(struct kvm *kvm, pfn_t pfn, unsigned long npages)
 int kvm_iommu_map_pages(struct kvm *kvm, struct kvm_memory_slot *slot)
 {
 	gfn_t gfn, end_gfn;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	int r = 0;
 	struct iommu_domain *domain = kvm->arch.iommu_domain;
 	int flags;
@@ -275,7 +276,7 @@ static void kvm_iommu_put_pages(struct kvm *kvm,
 {
 	struct iommu_domain *domain;
 	gfn_t end_gfn, gfn;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	u64 phys;
 
 	domain  = kvm->arch.iommu_domain;
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index 097060e33bd6..95fcc7b13866 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -33,7 +33,10 @@
  */
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
-	return apic_has_pending_timer(vcpu);
+	if (lapic_in_kernel(vcpu))
+		return apic_has_pending_timer(vcpu);
+
+	return 0;
 }
 EXPORT_SYMBOL(kvm_cpu_has_pending_timer);
 
@@ -76,7 +79,7 @@ int kvm_cpu_has_injectable_intr(struct kvm_vcpu *v)
 	if (kvm_cpu_has_extint(v))
 		return 1;
 
-	if (kvm_vcpu_apic_vid_enabled(v))
+	if (kvm_vcpu_apicv_active(v))
 		return 0;
 
 	return kvm_apic_has_interrupt(v) != -1; /* LAPIC */
@@ -137,8 +140,8 @@ EXPORT_SYMBOL_GPL(kvm_cpu_get_interrupt);
 
 void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu)
 {
-	kvm_inject_apic_timer_irqs(vcpu);
-	/* TODO: PIT, RTC etc. */
+	if (lapic_in_kernel(vcpu))
+		kvm_inject_apic_timer_irqs(vcpu);
 }
 EXPORT_SYMBOL_GPL(kvm_inject_pending_timer_irqs);
 
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index ae5c78f2337d..61ebdc13a29a 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -109,14 +109,6 @@ static inline int irqchip_in_kernel(struct kvm *kvm)
 	return ret;
 }
 
-static inline int lapic_in_kernel(struct kvm_vcpu *vcpu)
-{
-	/* Same as irqchip_in_kernel(vcpu->kvm), but with less
-	 * pointer chasing and no unnecessary memory barriers.
-	 */
-	return vcpu->arch.apic != NULL;
-}
-
 void kvm_pic_reset(struct kvm_kpic_state *s);
 
 void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c
index 84b96d319909..54ead79e444b 100644
--- a/arch/x86/kvm/irq_comm.c
+++ b/arch/x86/kvm/irq_comm.c
@@ -33,6 +33,9 @@
 
 #include "lapic.h"
 
+#include "hyperv.h"
+#include "x86.h"
+
 static int kvm_set_pic_irq(struct kvm_kernel_irq_routing_entry *e,
 			   struct kvm *kvm, int irq_source_id, int level,
 			   bool line_status)
@@ -51,10 +54,12 @@ static int kvm_set_ioapic_irq(struct kvm_kernel_irq_routing_entry *e,
 }
 
 int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
-		struct kvm_lapic_irq *irq, unsigned long *dest_map)
+		struct kvm_lapic_irq *irq, struct dest_map *dest_map)
 {
 	int i, r = -1;
 	struct kvm_vcpu *vcpu, *lowest = NULL;
+	unsigned long dest_vcpu_bitmap[BITS_TO_LONGS(KVM_MAX_VCPUS)];
+	unsigned int dest_vcpus = 0;
 
 	if (irq->dest_mode == 0 && irq->dest_id == 0xff &&
 			kvm_lowest_prio_delivery(irq)) {
@@ -65,6 +70,8 @@ int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
 	if (kvm_irq_delivery_to_apic_fast(kvm, src, irq, &r, dest_map))
 		return r;
 
+	memset(dest_vcpu_bitmap, 0, sizeof(dest_vcpu_bitmap));
+
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		if (!kvm_apic_present(vcpu))
 			continue;
@@ -78,13 +85,25 @@ int kvm_irq_delivery_to_apic(struct kvm *kvm, struct kvm_lapic *src,
 				r = 0;
 			r += kvm_apic_set_irq(vcpu, irq, dest_map);
 		} else if (kvm_lapic_enabled(vcpu)) {
-			if (!lowest)
-				lowest = vcpu;
-			else if (kvm_apic_compare_prio(vcpu, lowest) < 0)
-				lowest = vcpu;
+			if (!kvm_vector_hashing_enabled()) {
+				if (!lowest)
+					lowest = vcpu;
+				else if (kvm_apic_compare_prio(vcpu, lowest) < 0)
+					lowest = vcpu;
+			} else {
+				__set_bit(i, dest_vcpu_bitmap);
+				dest_vcpus++;
+			}
 		}
 	}
 
+	if (dest_vcpus != 0) {
+		int idx = kvm_vector_to_index(irq->vector, dest_vcpus,
+					dest_vcpu_bitmap, KVM_MAX_VCPUS);
+
+		lowest = kvm_get_vcpu(kvm, idx);
+	}
+
 	if (lowest)
 		r = kvm_apic_set_irq(lowest, irq, dest_map);
 
@@ -219,6 +238,16 @@ void kvm_fire_mask_notifiers(struct kvm *kvm, unsigned irqchip, unsigned pin,
 	srcu_read_unlock(&kvm->irq_srcu, idx);
 }
 
+static int kvm_hv_set_sint(struct kvm_kernel_irq_routing_entry *e,
+		    struct kvm *kvm, int irq_source_id, int level,
+		    bool line_status)
+{
+	if (!level)
+		return -1;
+
+	return kvm_hv_synic_set_irq(kvm, e->hv_sint.vcpu, e->hv_sint.sint);
+}
+
 int kvm_set_routing_entry(struct kvm_kernel_irq_routing_entry *e,
 			  const struct kvm_irq_routing_entry *ue)
 {
@@ -257,6 +286,11 @@ int kvm_set_routing_entry(struct kvm_kernel_irq_routing_entry *e,
 		e->msi.address_hi = ue->u.msi.address_hi;
 		e->msi.data = ue->u.msi.data;
 		break;
+	case KVM_IRQ_ROUTING_HV_SINT:
+		e->set = kvm_hv_set_sint;
+		e->hv_sint.vcpu = ue->u.hv_sint.vcpu;
+		e->hv_sint.sint = ue->u.hv_sint.sint;
+		break;
 	default:
 		goto out;
 	}
@@ -332,14 +366,15 @@ int kvm_setup_empty_irq_routing(struct kvm *kvm)
 	return kvm_set_irq_routing(kvm, empty_routing, 0, 0);
 }
 
-void kvm_arch_irq_routing_update(struct kvm *kvm)
+void kvm_arch_post_irq_routing_update(struct kvm *kvm)
 {
 	if (ioapic_in_kernel(kvm) || !irqchip_in_kernel(kvm))
 		return;
 	kvm_make_scan_ioapic_request(kvm);
 }
 
-void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
+void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu,
+			    ulong *ioapic_handled_vectors)
 {
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_kernel_irq_routing_entry *entry;
@@ -369,9 +404,26 @@ void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
 				u32 vector = entry->msi.data & 0xff;
 
 				__set_bit(vector,
-					  (unsigned long *) eoi_exit_bitmap);
+					  ioapic_handled_vectors);
 			}
 		}
 	}
 	srcu_read_unlock(&kvm->irq_srcu, idx);
 }
+
+int kvm_arch_set_irq(struct kvm_kernel_irq_routing_entry *irq, struct kvm *kvm,
+		     int irq_source_id, int level, bool line_status)
+{
+	switch (irq->type) {
+	case KVM_IRQ_ROUTING_HV_SINT:
+		return kvm_hv_set_sint(irq, kvm, irq_source_id, level,
+				       line_status);
+	default:
+		return -EWOULDBLOCK;
+	}
+}
+
+void kvm_arch_irq_routing_update(struct kvm *kvm)
+{
+	kvm_hv_irq_routing_update(kvm);
+}
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index e1e89ee4af75..762cdf2595f9 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -84,6 +84,11 @@ static inline u64 kvm_read_edx_eax(struct kvm_vcpu *vcpu)
 		| ((u64)(kvm_register_read(vcpu, VCPU_REGS_RDX) & -1u) << 32);
 }
 
+static inline u32 kvm_read_pkru(struct kvm_vcpu *vcpu)
+{
+	return kvm_x86_ops->get_pkru(vcpu);
+}
+
 static inline void enter_guest_mode(struct kvm_vcpu *vcpu)
 {
 	vcpu->arch.hflags |= HF_GUEST_MASK;
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ecd4ea1d28a8..1a2da0e5a373 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -41,6 +41,7 @@
 #include "trace.h"
 #include "x86.h"
 #include "cpuid.h"
+#include "hyperv.h"
 
 #ifndef CONFIG_X86_64
 #define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -128,11 +129,6 @@ static inline int apic_enabled(struct kvm_lapic *apic)
 	(LVT_MASK | APIC_MODE_MASK | APIC_INPUT_POLARITY | \
 	 APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER)
 
-static inline int kvm_apic_id(struct kvm_lapic *apic)
-{
-	return (kvm_apic_get_reg(apic, APIC_ID) >> 24) & 0xff;
-}
-
 /* The logical map is definitely wrong if we have multiple
  * modes at the same time.  (Physical map is always right.)
  */
@@ -285,7 +281,7 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu)
 	struct kvm_cpuid_entry2 *feat;
 	u32 v = APIC_VERSION;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
+	if (!lapic_in_kernel(vcpu))
 		return;
 
 	feat = kvm_find_cpuid_entry(apic->vcpu, 0x1, 0);
@@ -379,7 +375,8 @@ static inline int apic_find_highest_irr(struct kvm_lapic *apic)
 	if (!apic->irr_pending)
 		return -1;
 
-	kvm_x86_ops->sync_pir_to_irr(apic->vcpu);
+	if (apic->vcpu->arch.apicv_active)
+		kvm_x86_ops->sync_pir_to_irr(apic->vcpu);
 	result = apic_search_irr(apic);
 	ASSERT(result == -1 || result >= 16);
 
@@ -392,7 +389,7 @@ static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
 
 	vcpu = apic->vcpu;
 
-	if (unlikely(kvm_vcpu_apic_vid_enabled(vcpu))) {
+	if (unlikely(vcpu->arch.apicv_active)) {
 		/* try to update RVI */
 		apic_clear_vector(vec, apic->regs + APIC_IRR);
 		kvm_make_request(KVM_REQ_EVENT, vcpu);
@@ -418,7 +415,7 @@ static inline void apic_set_isr(int vec, struct kvm_lapic *apic)
 	 * because the processor can modify ISR under the hood.  Instead
 	 * just set SVI.
 	 */
-	if (unlikely(kvm_x86_ops->hwapic_isr_update))
+	if (unlikely(vcpu->arch.apicv_active))
 		kvm_x86_ops->hwapic_isr_update(vcpu->kvm, vec);
 	else {
 		++apic->isr_count;
@@ -466,7 +463,7 @@ static inline void apic_clear_isr(int vec, struct kvm_lapic *apic)
 	 * on the other hand isr_count and highest_isr_cache are unused
 	 * and must be left alone.
 	 */
-	if (unlikely(kvm_x86_ops->hwapic_isr_update))
+	if (unlikely(vcpu->arch.apicv_active))
 		kvm_x86_ops->hwapic_isr_update(vcpu->kvm,
 					       apic_find_highest_isr(apic));
 	else {
@@ -478,26 +475,20 @@ static inline void apic_clear_isr(int vec, struct kvm_lapic *apic)
 
 int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 {
-	int highest_irr;
-
 	/* This may race with setting of irr in __apic_accept_irq() and
 	 * value returned may be wrong, but kvm_vcpu_kick() in __apic_accept_irq
 	 * will cause vmexit immediately and the value will be recalculated
 	 * on the next vmentry.
 	 */
-	if (!kvm_vcpu_has_lapic(vcpu))
-		return 0;
-	highest_irr = apic_find_highest_irr(vcpu->arch.apic);
-
-	return highest_irr;
+	return apic_find_highest_irr(vcpu->arch.apic);
 }
 
 static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			     int vector, int level, int trig_mode,
-			     unsigned long *dest_map);
+			     struct dest_map *dest_map);
 
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq,
-		unsigned long *dest_map)
+		     struct dest_map *dest_map)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
@@ -678,8 +669,33 @@ bool kvm_apic_match_dest(struct kvm_vcpu *vcpu, struct kvm_lapic *source,
 	}
 }
 
+int kvm_vector_to_index(u32 vector, u32 dest_vcpus,
+		       const unsigned long *bitmap, u32 bitmap_size)
+{
+	u32 mod;
+	int i, idx = -1;
+
+	mod = vector % dest_vcpus;
+
+	for (i = 0; i <= mod; i++) {
+		idx = find_next_bit(bitmap, bitmap_size, idx + 1);
+		BUG_ON(idx == bitmap_size);
+	}
+
+	return idx;
+}
+
+static void kvm_apic_disabled_lapic_found(struct kvm *kvm)
+{
+	if (!kvm->arch.disabled_lapic_found) {
+		kvm->arch.disabled_lapic_found = true;
+		printk(KERN_INFO
+		       "Disabled LAPIC found during irq injection\n");
+	}
+}
+
 bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
-		struct kvm_lapic_irq *irq, int *r, unsigned long *dest_map)
+		struct kvm_lapic_irq *irq, int *r, struct dest_map *dest_map)
 {
 	struct kvm_apic_map *map;
 	unsigned long bitmap = 1;
@@ -730,21 +746,42 @@ bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
 
 		dst = map->logical_map[cid];
 
-		if (kvm_lowest_prio_delivery(irq)) {
+		if (!kvm_lowest_prio_delivery(irq))
+			goto set_irq;
+
+		if (!kvm_vector_hashing_enabled()) {
 			int l = -1;
 			for_each_set_bit(i, &bitmap, 16) {
 				if (!dst[i])
 					continue;
 				if (l < 0)
 					l = i;
-				else if (kvm_apic_compare_prio(dst[i]->vcpu, dst[l]->vcpu) < 0)
+				else if (kvm_apic_compare_prio(dst[i]->vcpu,
+							dst[l]->vcpu) < 0)
 					l = i;
 			}
-
 			bitmap = (l >= 0) ? 1 << l : 0;
+		} else {
+			int idx;
+			unsigned int dest_vcpus;
+
+			dest_vcpus = hweight16(bitmap);
+			if (dest_vcpus == 0)
+				goto out;
+
+			idx = kvm_vector_to_index(irq->vector,
+				dest_vcpus, &bitmap, 16);
+
+			if (!dst[idx]) {
+				kvm_apic_disabled_lapic_found(kvm);
+				goto out;
+			}
+
+			bitmap = (idx >= 0) ? 1 << idx : 0;
 		}
 	}
 
+set_irq:
 	for_each_set_bit(i, &bitmap, 16) {
 		if (!dst[i])
 			continue;
@@ -757,6 +794,20 @@ out:
 	return ret;
 }
 
+/*
+ * This routine tries to handler interrupts in posted mode, here is how
+ * it deals with different cases:
+ * - For single-destination interrupts, handle it in posted mode
+ * - Else if vector hashing is enabled and it is a lowest-priority
+ *   interrupt, handle it in posted mode and use the following mechanism
+ *   to find the destinaiton vCPU.
+ *	1. For lowest-priority interrupts, store all the possible
+ *	   destination vCPUs in an array.
+ *	2. Use "guest vector % max number of destination vCPUs" to find
+ *	   the right destination vCPU in the array for the lowest-priority
+ *	   interrupt.
+ * - Otherwise, use remapped mode to inject the interrupt.
+ */
 bool kvm_intr_is_single_vcpu_fast(struct kvm *kvm, struct kvm_lapic_irq *irq,
 			struct kvm_vcpu **dest_vcpu)
 {
@@ -798,16 +849,37 @@ bool kvm_intr_is_single_vcpu_fast(struct kvm *kvm, struct kvm_lapic_irq *irq,
 		if (cid >= ARRAY_SIZE(map->logical_map))
 			goto out;
 
-		for_each_set_bit(i, &bitmap, 16) {
-			dst = map->logical_map[cid][i];
-			if (++r == 2)
+		if (kvm_vector_hashing_enabled() &&
+				kvm_lowest_prio_delivery(irq)) {
+			int idx;
+			unsigned int dest_vcpus;
+
+			dest_vcpus = hweight16(bitmap);
+			if (dest_vcpus == 0)
 				goto out;
-		}
 
-		if (dst && kvm_apic_present(dst->vcpu))
+			idx = kvm_vector_to_index(irq->vector, dest_vcpus,
+						  &bitmap, 16);
+
+			dst = map->logical_map[cid][idx];
+			if (!dst) {
+				kvm_apic_disabled_lapic_found(kvm);
+				goto out;
+			}
+
 			*dest_vcpu = dst->vcpu;
-		else
-			goto out;
+		} else {
+			for_each_set_bit(i, &bitmap, 16) {
+				dst = map->logical_map[cid][i];
+				if (++r == 2)
+					goto out;
+			}
+
+			if (dst && kvm_apic_present(dst->vcpu))
+				*dest_vcpu = dst->vcpu;
+			else
+				goto out;
+		}
 	}
 
 	ret = true;
@@ -822,7 +894,7 @@ out:
  */
 static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			     int vector, int level, int trig_mode,
-			     unsigned long *dest_map)
+			     struct dest_map *dest_map)
 {
 	int result = 0;
 	struct kvm_vcpu *vcpu = apic->vcpu;
@@ -842,8 +914,10 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 
 		result = 1;
 
-		if (dest_map)
-			__set_bit(vcpu->vcpu_id, dest_map);
+		if (dest_map) {
+			__set_bit(vcpu->vcpu_id, dest_map->map);
+			dest_map->vectors[vcpu->vcpu_id] = vector;
+		}
 
 		if (apic_test_vector(vector, apic->regs + APIC_TMR) != !!trig_mode) {
 			if (trig_mode)
@@ -852,7 +926,7 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 				apic_clear_vector(vector, apic->regs + APIC_TMR);
 		}
 
-		if (kvm_x86_ops->deliver_posted_interrupt)
+		if (vcpu->arch.apicv_active)
 			kvm_x86_ops->deliver_posted_interrupt(vcpu, vector);
 		else {
 			apic_set_irr(vector, apic);
@@ -932,7 +1006,7 @@ int kvm_apic_compare_prio(struct kvm_vcpu *vcpu1, struct kvm_vcpu *vcpu2)
 
 static bool kvm_ioapic_handles_vector(struct kvm_lapic *apic, int vector)
 {
-	return test_bit(vector, (ulong *)apic->vcpu->arch.eoi_exit_bitmap);
+	return test_bit(vector, apic->vcpu->arch.ioapic_handled_vectors);
 }
 
 static void kvm_ioapic_send_eoi(struct kvm_lapic *apic, int vector)
@@ -974,6 +1048,9 @@ static int apic_set_eoi(struct kvm_lapic *apic)
 	apic_clear_isr(vector, apic);
 	apic_update_ppr(apic);
 
+	if (test_bit(vector, vcpu_to_synic(apic->vcpu)->vec_bitmap))
+		kvm_hv_synic_send_eoi(apic->vcpu, vector);
+
 	kvm_ioapic_send_eoi(apic, vector);
 	kvm_make_request(KVM_REQ_EVENT, apic->vcpu);
 	return vector;
@@ -1195,7 +1272,7 @@ static void apic_update_lvtt(struct kvm_lapic *apic)
 static void apic_timer_expired(struct kvm_lapic *apic)
 {
 	struct kvm_vcpu *vcpu = apic->vcpu;
-	wait_queue_head_t *q = &vcpu->wq;
+	struct swait_queue_head *q = &vcpu->wq;
 	struct kvm_timer *ktimer = &apic->lapic_timer;
 
 	if (atomic_read(&apic->lapic_timer.pending))
@@ -1204,8 +1281,8 @@ static void apic_timer_expired(struct kvm_lapic *apic)
 	atomic_inc(&apic->lapic_timer.pending);
 	kvm_set_pending_timer(vcpu);
 
-	if (waitqueue_active(q))
-		wake_up_interruptible(q);
+	if (swait_active(q))
+		swake_up(q);
 
 	if (apic_lvtt_tscdeadline(apic))
 		ktimer->expired_tscdeadline = ktimer->tscdeadline;
@@ -1225,7 +1302,7 @@ static bool lapic_timer_int_injected(struct kvm_vcpu *vcpu)
 		int vec = reg & APIC_VECTOR_MASK;
 		void *bitmap = apic->regs + APIC_ISR;
 
-		if (kvm_x86_ops->deliver_posted_interrupt)
+		if (vcpu->arch.apicv_active)
 			bitmap = apic->regs + APIC_IRR;
 
 		if (apic_test_vector(vec, bitmap))
@@ -1239,7 +1316,7 @@ void wait_lapic_expire(struct kvm_vcpu *vcpu)
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	u64 guest_tsc, tsc_deadline;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
+	if (!lapic_in_kernel(vcpu))
 		return;
 
 	if (apic->lapic_timer.expired_tscdeadline == 0)
@@ -1250,7 +1327,7 @@ void wait_lapic_expire(struct kvm_vcpu *vcpu)
 
 	tsc_deadline = apic->lapic_timer.expired_tscdeadline;
 	apic->lapic_timer.expired_tscdeadline = 0;
-	guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu, rdtsc());
+	guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
 	trace_kvm_wait_lapic_expire(vcpu->vcpu_id, guest_tsc - tsc_deadline);
 
 	/* __delay is delay_tsc whenever the hardware has TSC, thus always.  */
@@ -1292,7 +1369,7 @@ static void start_apic_timer(struct kvm_lapic *apic)
 
 		hrtimer_start(&apic->lapic_timer.timer,
 			      ktime_add_ns(now, apic->lapic_timer.period),
-			      HRTIMER_MODE_ABS);
+			      HRTIMER_MODE_ABS_PINNED);
 
 		apic_debug("%s: bus cycle is %" PRId64 "ns, now 0x%016"
 			   PRIx64 ", "
@@ -1318,14 +1395,14 @@ static void start_apic_timer(struct kvm_lapic *apic)
 		local_irq_save(flags);
 
 		now = apic->lapic_timer.timer.base->get_time();
-		guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu, rdtsc());
+		guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
 		if (likely(tscdeadline > guest_tsc)) {
 			ns = (tscdeadline - guest_tsc) * 1000000ULL;
 			do_div(ns, this_tsc_khz);
 			expire = ktime_add_ns(now, ns);
 			expire = ktime_sub_ns(expire, lapic_timer_advance_ns);
 			hrtimer_start(&apic->lapic_timer.timer,
-				      expire, HRTIMER_MODE_ABS);
+				      expire, HRTIMER_MODE_ABS_PINNED);
 		} else
 			apic_timer_expired(apic);
 
@@ -1515,8 +1592,7 @@ static int apic_mmio_write(struct kvm_vcpu *vcpu, struct kvm_io_device *this,
 
 void kvm_lapic_set_eoi(struct kvm_vcpu *vcpu)
 {
-	if (kvm_vcpu_has_lapic(vcpu))
-		apic_reg_write(vcpu->arch.apic, APIC_EOI, 0);
+	apic_reg_write(vcpu->arch.apic, APIC_EOI, 0);
 }
 EXPORT_SYMBOL_GPL(kvm_lapic_set_eoi);
 
@@ -1566,7 +1642,7 @@ u64 kvm_get_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!kvm_vcpu_has_lapic(vcpu) || apic_lvtt_oneshot(apic) ||
+	if (!lapic_in_kernel(vcpu) || apic_lvtt_oneshot(apic) ||
 			apic_lvtt_period(apic))
 		return 0;
 
@@ -1577,7 +1653,7 @@ void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!kvm_vcpu_has_lapic(vcpu) || apic_lvtt_oneshot(apic) ||
+	if (!lapic_in_kernel(vcpu) || apic_lvtt_oneshot(apic) ||
 			apic_lvtt_period(apic))
 		return;
 
@@ -1590,9 +1666,6 @@ void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
-		return;
-
 	apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
 		     | (kvm_apic_get_reg(apic, APIC_TASKPRI) & 4));
 }
@@ -1601,9 +1674,6 @@ u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
 {
 	u64 tpr;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
-		return 0;
-
 	tpr = (u64) kvm_apic_get_reg(vcpu->arch.apic, APIC_TASKPRI);
 
 	return (tpr & 0xf0) >> 4;
@@ -1693,8 +1763,8 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 		apic_set_reg(apic, APIC_ISR + 0x10 * i, 0);
 		apic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
 	}
-	apic->irr_pending = kvm_vcpu_apic_vid_enabled(vcpu);
-	apic->isr_count = kvm_x86_ops->hwapic_isr_update ? 1 : 0;
+	apic->irr_pending = vcpu->arch.apicv_active;
+	apic->isr_count = vcpu->arch.apicv_active ? 1 : 0;
 	apic->highest_isr_cache = -1;
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
@@ -1728,8 +1798,7 @@ int apic_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (kvm_vcpu_has_lapic(vcpu) && apic_enabled(apic) &&
-			apic_lvt_enabled(apic, APIC_LVTT))
+	if (apic_enabled(apic) && apic_lvt_enabled(apic, APIC_LVTT))
 		return atomic_read(&apic->lapic_timer.pending);
 
 	return 0;
@@ -1799,7 +1868,7 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu)
 	apic->vcpu = vcpu;
 
 	hrtimer_init(&apic->lapic_timer.timer, CLOCK_MONOTONIC,
-		     HRTIMER_MODE_ABS);
+		     HRTIMER_MODE_ABS_PINNED);
 	apic->lapic_timer.timer.function = apic_timer_fn;
 
 	/*
@@ -1826,7 +1895,7 @@ int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu)
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	int highest_irr;
 
-	if (!kvm_vcpu_has_lapic(vcpu) || !apic_enabled(apic))
+	if (!apic_enabled(apic))
 		return -1;
 
 	apic_update_ppr(apic);
@@ -1854,9 +1923,6 @@ void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
-		return;
-
 	if (atomic_read(&apic->lapic_timer.pending) > 0) {
 		kvm_apic_local_deliver(apic, APIC_LVTT);
 		if (apic_lvtt_tscdeadline(apic))
@@ -1883,6 +1949,12 @@ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
 	apic_set_isr(vector, apic);
 	apic_update_ppr(apic);
 	apic_clear_irr(vector, apic);
+
+	if (test_bit(vector, vcpu_to_synic(vcpu)->auto_eoi_bitmap)) {
+		apic_clear_isr(vector, apic);
+		apic_update_ppr(apic);
+	}
+
 	return vector;
 }
 
@@ -1906,15 +1978,15 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
 	update_divide_count(apic);
 	start_apic_timer(apic);
 	apic->irr_pending = true;
-	apic->isr_count = kvm_x86_ops->hwapic_isr_update ?
+	apic->isr_count = vcpu->arch.apicv_active ?
 				1 : count_vectors(apic->regs + APIC_ISR);
 	apic->highest_isr_cache = -1;
-	if (kvm_x86_ops->hwapic_irr_update)
+	if (vcpu->arch.apicv_active) {
 		kvm_x86_ops->hwapic_irr_update(vcpu,
 				apic_find_highest_irr(apic));
-	if (unlikely(kvm_x86_ops->hwapic_isr_update))
 		kvm_x86_ops->hwapic_isr_update(vcpu->kvm,
 				apic_find_highest_isr(apic));
+	}
 	kvm_make_request(KVM_REQ_EVENT, vcpu);
 	if (ioapic_in_kernel(vcpu->kvm))
 		kvm_rtc_eoi_tracking_restore_one(vcpu);
@@ -1926,12 +1998,12 @@ void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
 {
 	struct hrtimer *timer;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
+	if (!lapic_in_kernel(vcpu))
 		return;
 
 	timer = &vcpu->arch.apic->lapic_timer.timer;
 	if (hrtimer_cancel(timer))
-		hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
+		hrtimer_start_expires(timer, HRTIMER_MODE_ABS_PINNED);
 }
 
 /*
@@ -2099,7 +2171,7 @@ int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 reg, u64 data)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
+	if (!lapic_in_kernel(vcpu))
 		return 1;
 
 	/* if this is ICR write vector before command */
@@ -2113,7 +2185,7 @@ int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 reg, u64 *data)
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	u32 low, high = 0;
 
-	if (!kvm_vcpu_has_lapic(vcpu))
+	if (!lapic_in_kernel(vcpu))
 		return 1;
 
 	if (apic_reg_read(apic, reg, 4, &low))
@@ -2145,7 +2217,7 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu)
 	u8 sipi_vector;
 	unsigned long pe;
 
-	if (!kvm_vcpu_has_lapic(vcpu) || !apic->pending_events)
+	if (!lapic_in_kernel(vcpu) || !apic->pending_events)
 		return;
 
 	/*
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index fde8e35d5850..f71183e502ee 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -42,6 +42,9 @@ struct kvm_lapic {
 	unsigned long pending_events;
 	unsigned int sipi_vector;
 };
+
+struct dest_map;
+
 int kvm_create_lapic(struct kvm_vcpu *vcpu);
 void kvm_free_lapic(struct kvm_vcpu *vcpu);
 
@@ -60,11 +63,11 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu);
 void __kvm_apic_update_irr(u32 *pir, void *regs);
 void kvm_apic_update_irr(struct kvm_vcpu *vcpu, u32 *pir);
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, struct kvm_lapic_irq *irq,
-		unsigned long *dest_map);
+		     struct dest_map *dest_map);
 int kvm_apic_local_deliver(struct kvm_lapic *apic, int lvt_type);
 
 bool kvm_irq_delivery_to_apic_fast(struct kvm *kvm, struct kvm_lapic *src,
-		struct kvm_lapic_irq *irq, int *r, unsigned long *dest_map);
+		struct kvm_lapic_irq *irq, int *r, struct dest_map *dest_map);
 
 u64 kvm_get_apic_base(struct kvm_vcpu *vcpu);
 int kvm_set_apic_base(struct kvm_vcpu *vcpu, struct msr_data *msr_info);
@@ -103,7 +106,7 @@ static inline u32 kvm_apic_get_reg(struct kvm_lapic *apic, int reg_off)
 
 extern struct static_key kvm_no_apic_vcpu;
 
-static inline bool kvm_vcpu_has_lapic(struct kvm_vcpu *vcpu)
+static inline bool lapic_in_kernel(struct kvm_vcpu *vcpu)
 {
 	if (static_key_false(&kvm_no_apic_vcpu))
 		return vcpu->arch.apic;
@@ -130,7 +133,7 @@ static inline bool kvm_apic_sw_enabled(struct kvm_lapic *apic)
 
 static inline bool kvm_apic_present(struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_has_lapic(vcpu) && kvm_apic_hw_enabled(vcpu->arch.apic);
+	return lapic_in_kernel(vcpu) && kvm_apic_hw_enabled(vcpu->arch.apic);
 }
 
 static inline int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
@@ -143,14 +146,14 @@ static inline int apic_x2apic_mode(struct kvm_lapic *apic)
 	return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
 }
 
-static inline bool kvm_vcpu_apic_vid_enabled(struct kvm_vcpu *vcpu)
+static inline bool kvm_vcpu_apicv_active(struct kvm_vcpu *vcpu)
 {
-	return kvm_x86_ops->cpu_uses_apicv(vcpu);
+	return vcpu->arch.apic && vcpu->arch.apicv_active;
 }
 
 static inline bool kvm_apic_has_events(struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_has_lapic(vcpu) && vcpu->arch.apic->pending_events;
+	return lapic_in_kernel(vcpu) && vcpu->arch.apic->pending_events;
 }
 
 static inline bool kvm_lowest_prio_delivery(struct kvm_lapic_irq *irq)
@@ -161,7 +164,12 @@ static inline bool kvm_lowest_prio_delivery(struct kvm_lapic_irq *irq)
 
 static inline int kvm_lapic_latched_init(struct kvm_vcpu *vcpu)
 {
-	return kvm_vcpu_has_lapic(vcpu) && test_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
+	return lapic_in_kernel(vcpu) && test_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
+}
+
+static inline int kvm_apic_id(struct kvm_lapic *apic)
+{
+	return (kvm_apic_get_reg(apic, APIC_ID) >> 24) & 0xff;
 }
 
 bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
@@ -170,4 +178,6 @@ void wait_lapic_expire(struct kvm_vcpu *vcpu);
 
 bool kvm_intr_is_single_vcpu_fast(struct kvm *kvm, struct kvm_lapic_irq *irq,
 			struct kvm_vcpu **dest_vcpu);
+int kvm_vector_to_index(u32 vector, u32 dest_vcpus,
+			const unsigned long *bitmap, u32 bitmap_size);
 #endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7d85bcae3332..1ff4dbb73fb7 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -41,6 +41,7 @@
 #include <asm/cmpxchg.h>
 #include <asm/io.h>
 #include <asm/vmx.h>
+#include <asm/kvm_page_track.h>
 
 /*
  * When setting this variable to true it enables Two-Dimensional-Paging
@@ -259,7 +260,7 @@ static unsigned get_mmio_spte_access(u64 spte)
 }
 
 static bool set_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, gfn_t gfn,
-			  pfn_t pfn, unsigned access)
+			  kvm_pfn_t pfn, unsigned access)
 {
 	if (unlikely(is_noslot_pfn(pfn))) {
 		mark_mmio_spte(vcpu, sptep, gfn, access);
@@ -311,11 +312,6 @@ static int is_large_pte(u64 pte)
 	return pte & PT_PAGE_SIZE_MASK;
 }
 
-static int is_rmap_spte(u64 pte)
-{
-	return is_shadow_present_pte(pte);
-}
-
 static int is_last_spte(u64 pte, int level)
 {
 	if (level == PT_PAGE_TABLE_LEVEL)
@@ -325,7 +321,7 @@ static int is_last_spte(u64 pte, int level)
 	return 0;
 }
 
-static pfn_t spte_to_pfn(u64 pte)
+static kvm_pfn_t spte_to_pfn(u64 pte)
 {
 	return (pte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 }
@@ -483,7 +479,7 @@ static bool spte_is_locklessly_modifiable(u64 spte)
 static bool spte_has_volatile_bits(u64 spte)
 {
 	/*
-	 * Always atomicly update spte if it can be updated
+	 * Always atomically update spte if it can be updated
 	 * out of mmu-lock, it can ensure dirty bit is not lost,
 	 * also, it can help us to get a stable is_writable_pte()
 	 * to ensure tlb flush is not missed.
@@ -540,7 +536,7 @@ static bool mmu_spte_update(u64 *sptep, u64 new_spte)
 	u64 old_spte = *sptep;
 	bool ret = false;
 
-	WARN_ON(!is_rmap_spte(new_spte));
+	WARN_ON(!is_shadow_present_pte(new_spte));
 
 	if (!is_shadow_present_pte(old_spte)) {
 		mmu_spte_set(sptep, new_spte);
@@ -554,15 +550,22 @@ static bool mmu_spte_update(u64 *sptep, u64 new_spte)
 
 	/*
 	 * For the spte updated out of mmu-lock is safe, since
-	 * we always atomicly update it, see the comments in
+	 * we always atomically update it, see the comments in
 	 * spte_has_volatile_bits().
 	 */
 	if (spte_is_locklessly_modifiable(old_spte) &&
 	      !is_writable_pte(new_spte))
 		ret = true;
 
-	if (!shadow_accessed_mask)
+	if (!shadow_accessed_mask) {
+		/*
+		 * We don't set page dirty when dropping non-writable spte.
+		 * So do it now if the new spte is becoming non-writable.
+		 */
+		if (ret)
+			kvm_set_pfn_dirty(spte_to_pfn(old_spte));
 		return ret;
+	}
 
 	/*
 	 * Flush TLB when accessed/dirty bits are changed in the page tables,
@@ -587,7 +590,7 @@ static bool mmu_spte_update(u64 *sptep, u64 new_spte)
  */
 static int mmu_spte_clear_track_bits(u64 *sptep)
 {
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	u64 old_spte = *sptep;
 
 	if (!spte_has_volatile_bits(old_spte))
@@ -595,7 +598,7 @@ static int mmu_spte_clear_track_bits(u64 *sptep)
 	else
 		old_spte = __update_clear_spte_slow(sptep, 0ull);
 
-	if (!is_rmap_spte(old_spte))
+	if (!is_shadow_present_pte(old_spte))
 		return 0;
 
 	pfn = spte_to_pfn(old_spte);
@@ -609,7 +612,8 @@ static int mmu_spte_clear_track_bits(u64 *sptep)
 
 	if (!shadow_accessed_mask || old_spte & shadow_accessed_mask)
 		kvm_set_pfn_accessed(pfn);
-	if (!shadow_dirty_mask || (old_spte & shadow_dirty_mask))
+	if (old_spte & (shadow_dirty_mask ? shadow_dirty_mask :
+					    PT_WRITABLE_MASK))
 		kvm_set_pfn_dirty(pfn);
 	return 1;
 }
@@ -636,12 +640,12 @@ static void walk_shadow_page_lockless_begin(struct kvm_vcpu *vcpu)
 	 * kvm_flush_remote_tlbs() IPI to all active vcpus.
 	 */
 	local_irq_disable();
-	vcpu->mode = READING_SHADOW_PAGE_TABLES;
+
 	/*
 	 * Make sure a following spte read is not reordered ahead of the write
 	 * to vcpu->mode.
 	 */
-	smp_mb();
+	smp_store_mb(vcpu->mode, READING_SHADOW_PAGE_TABLES);
 }
 
 static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
@@ -651,8 +655,7 @@ static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
 	 * reads to sptes.  If it does, kvm_commit_zap_page() can see us
 	 * OUTSIDE_GUEST_MODE and proceed to free the shadow page table.
 	 */
-	smp_mb();
-	vcpu->mode = OUTSIDE_GUEST_MODE;
+	smp_store_release(&vcpu->mode, OUTSIDE_GUEST_MODE);
 	local_irq_enable();
 }
 
@@ -781,62 +784,85 @@ static struct kvm_lpage_info *lpage_info_slot(gfn_t gfn,
 	return &slot->arch.lpage_info[level - 2][idx];
 }
 
+static void update_gfn_disallow_lpage_count(struct kvm_memory_slot *slot,
+					    gfn_t gfn, int count)
+{
+	struct kvm_lpage_info *linfo;
+	int i;
+
+	for (i = PT_DIRECTORY_LEVEL; i <= PT_MAX_HUGEPAGE_LEVEL; ++i) {
+		linfo = lpage_info_slot(gfn, slot, i);
+		linfo->disallow_lpage += count;
+		WARN_ON(linfo->disallow_lpage < 0);
+	}
+}
+
+void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn)
+{
+	update_gfn_disallow_lpage_count(slot, gfn, 1);
+}
+
+void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn)
+{
+	update_gfn_disallow_lpage_count(slot, gfn, -1);
+}
+
 static void account_shadowed(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	struct kvm_memslots *slots;
 	struct kvm_memory_slot *slot;
-	struct kvm_lpage_info *linfo;
 	gfn_t gfn;
-	int i;
 
+	kvm->arch.indirect_shadow_pages++;
 	gfn = sp->gfn;
 	slots = kvm_memslots_for_spte_role(kvm, sp->role);
 	slot = __gfn_to_memslot(slots, gfn);
-	for (i = PT_DIRECTORY_LEVEL; i <= PT_MAX_HUGEPAGE_LEVEL; ++i) {
-		linfo = lpage_info_slot(gfn, slot, i);
-		linfo->write_count += 1;
-	}
-	kvm->arch.indirect_shadow_pages++;
+
+	/* the non-leaf shadow pages are keeping readonly. */
+	if (sp->role.level > PT_PAGE_TABLE_LEVEL)
+		return kvm_slot_page_track_add_page(kvm, slot, gfn,
+						    KVM_PAGE_TRACK_WRITE);
+
+	kvm_mmu_gfn_disallow_lpage(slot, gfn);
 }
 
 static void unaccount_shadowed(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	struct kvm_memslots *slots;
 	struct kvm_memory_slot *slot;
-	struct kvm_lpage_info *linfo;
 	gfn_t gfn;
-	int i;
 
+	kvm->arch.indirect_shadow_pages--;
 	gfn = sp->gfn;
 	slots = kvm_memslots_for_spte_role(kvm, sp->role);
 	slot = __gfn_to_memslot(slots, gfn);
-	for (i = PT_DIRECTORY_LEVEL; i <= PT_MAX_HUGEPAGE_LEVEL; ++i) {
-		linfo = lpage_info_slot(gfn, slot, i);
-		linfo->write_count -= 1;
-		WARN_ON(linfo->write_count < 0);
-	}
-	kvm->arch.indirect_shadow_pages--;
+	if (sp->role.level > PT_PAGE_TABLE_LEVEL)
+		return kvm_slot_page_track_remove_page(kvm, slot, gfn,
+						       KVM_PAGE_TRACK_WRITE);
+
+	kvm_mmu_gfn_allow_lpage(slot, gfn);
 }
 
-static int __has_wrprotected_page(gfn_t gfn, int level,
-				  struct kvm_memory_slot *slot)
+static bool __mmu_gfn_lpage_is_disallowed(gfn_t gfn, int level,
+					  struct kvm_memory_slot *slot)
 {
 	struct kvm_lpage_info *linfo;
 
 	if (slot) {
 		linfo = lpage_info_slot(gfn, slot, level);
-		return linfo->write_count;
+		return !!linfo->disallow_lpage;
 	}
 
-	return 1;
+	return true;
 }
 
-static int has_wrprotected_page(struct kvm_vcpu *vcpu, gfn_t gfn, int level)
+static bool mmu_gfn_lpage_is_disallowed(struct kvm_vcpu *vcpu, gfn_t gfn,
+					int level)
 {
 	struct kvm_memory_slot *slot;
 
 	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
-	return __has_wrprotected_page(gfn, level, slot);
+	return __mmu_gfn_lpage_is_disallowed(gfn, level, slot);
 }
 
 static int host_mapping_level(struct kvm *kvm, gfn_t gfn)
@@ -902,43 +928,42 @@ static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn,
 	max_level = min(kvm_x86_ops->get_lpage_level(), host_level);
 
 	for (level = PT_DIRECTORY_LEVEL; level <= max_level; ++level)
-		if (__has_wrprotected_page(large_gfn, level, slot))
+		if (__mmu_gfn_lpage_is_disallowed(large_gfn, level, slot))
 			break;
 
 	return level - 1;
 }
 
 /*
- * Pte mapping structures:
- *
- * If pte_list bit zero is zero, then pte_list point to the spte.
+ * About rmap_head encoding:
  *
- * If pte_list bit zero is one, (then pte_list & ~1) points to a struct
+ * If the bit zero of rmap_head->val is clear, then it points to the only spte
+ * in this rmap chain. Otherwise, (rmap_head->val & ~1) points to a struct
  * pte_list_desc containing more mappings.
- *
- * Returns the number of pte entries before the spte was added or zero if
- * the spte was not added.
- *
+ */
+
+/*
+ * Returns the number of pointers in the rmap chain, not counting the new one.
  */
 static int pte_list_add(struct kvm_vcpu *vcpu, u64 *spte,
-			unsigned long *pte_list)
+			struct kvm_rmap_head *rmap_head)
 {
 	struct pte_list_desc *desc;
 	int i, count = 0;
 
-	if (!*pte_list) {
+	if (!rmap_head->val) {
 		rmap_printk("pte_list_add: %p %llx 0->1\n", spte, *spte);
-		*pte_list = (unsigned long)spte;
-	} else if (!(*pte_list & 1)) {
+		rmap_head->val = (unsigned long)spte;
+	} else if (!(rmap_head->val & 1)) {
 		rmap_printk("pte_list_add: %p %llx 1->many\n", spte, *spte);
 		desc = mmu_alloc_pte_list_desc(vcpu);
-		desc->sptes[0] = (u64 *)*pte_list;
+		desc->sptes[0] = (u64 *)rmap_head->val;
 		desc->sptes[1] = spte;
-		*pte_list = (unsigned long)desc | 1;
+		rmap_head->val = (unsigned long)desc | 1;
 		++count;
 	} else {
 		rmap_printk("pte_list_add: %p %llx many->many\n", spte, *spte);
-		desc = (struct pte_list_desc *)(*pte_list & ~1ul);
+		desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
 		while (desc->sptes[PTE_LIST_EXT-1] && desc->more) {
 			desc = desc->more;
 			count += PTE_LIST_EXT;
@@ -955,8 +980,9 @@ static int pte_list_add(struct kvm_vcpu *vcpu, u64 *spte,
 }
 
 static void
-pte_list_desc_remove_entry(unsigned long *pte_list, struct pte_list_desc *desc,
-			   int i, struct pte_list_desc *prev_desc)
+pte_list_desc_remove_entry(struct kvm_rmap_head *rmap_head,
+			   struct pte_list_desc *desc, int i,
+			   struct pte_list_desc *prev_desc)
 {
 	int j;
 
@@ -967,43 +993,43 @@ pte_list_desc_remove_entry(unsigned long *pte_list, struct pte_list_desc *desc,
 	if (j != 0)
 		return;
 	if (!prev_desc && !desc->more)
-		*pte_list = (unsigned long)desc->sptes[0];
+		rmap_head->val = (unsigned long)desc->sptes[0];
 	else
 		if (prev_desc)
 			prev_desc->more = desc->more;
 		else
-			*pte_list = (unsigned long)desc->more | 1;
+			rmap_head->val = (unsigned long)desc->more | 1;
 	mmu_free_pte_list_desc(desc);
 }
 
-static void pte_list_remove(u64 *spte, unsigned long *pte_list)
+static void pte_list_remove(u64 *spte, struct kvm_rmap_head *rmap_head)
 {
 	struct pte_list_desc *desc;
 	struct pte_list_desc *prev_desc;
 	int i;
 
-	if (!*pte_list) {
+	if (!rmap_head->val) {
 		printk(KERN_ERR "pte_list_remove: %p 0->BUG\n", spte);
 		BUG();
-	} else if (!(*pte_list & 1)) {
+	} else if (!(rmap_head->val & 1)) {
 		rmap_printk("pte_list_remove:  %p 1->0\n", spte);
-		if ((u64 *)*pte_list != spte) {
+		if ((u64 *)rmap_head->val != spte) {
 			printk(KERN_ERR "pte_list_remove:  %p 1->BUG\n", spte);
 			BUG();
 		}
-		*pte_list = 0;
+		rmap_head->val = 0;
 	} else {
 		rmap_printk("pte_list_remove:  %p many->many\n", spte);
-		desc = (struct pte_list_desc *)(*pte_list & ~1ul);
+		desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
 		prev_desc = NULL;
 		while (desc) {
-			for (i = 0; i < PTE_LIST_EXT && desc->sptes[i]; ++i)
+			for (i = 0; i < PTE_LIST_EXT && desc->sptes[i]; ++i) {
 				if (desc->sptes[i] == spte) {
-					pte_list_desc_remove_entry(pte_list,
-							       desc, i,
-							       prev_desc);
+					pte_list_desc_remove_entry(rmap_head,
+							desc, i, prev_desc);
 					return;
 				}
+			}
 			prev_desc = desc;
 			desc = desc->more;
 		}
@@ -1012,28 +1038,8 @@ static void pte_list_remove(u64 *spte, unsigned long *pte_list)
 	}
 }
 
-typedef void (*pte_list_walk_fn) (u64 *spte);
-static void pte_list_walk(unsigned long *pte_list, pte_list_walk_fn fn)
-{
-	struct pte_list_desc *desc;
-	int i;
-
-	if (!*pte_list)
-		return;
-
-	if (!(*pte_list & 1))
-		return fn((u64 *)*pte_list);
-
-	desc = (struct pte_list_desc *)(*pte_list & ~1ul);
-	while (desc) {
-		for (i = 0; i < PTE_LIST_EXT && desc->sptes[i]; ++i)
-			fn(desc->sptes[i]);
-		desc = desc->more;
-	}
-}
-
-static unsigned long *__gfn_to_rmap(gfn_t gfn, int level,
-				    struct kvm_memory_slot *slot)
+static struct kvm_rmap_head *__gfn_to_rmap(gfn_t gfn, int level,
+					   struct kvm_memory_slot *slot)
 {
 	unsigned long idx;
 
@@ -1041,10 +1047,8 @@ static unsigned long *__gfn_to_rmap(gfn_t gfn, int level,
 	return &slot->arch.rmap[level - PT_PAGE_TABLE_LEVEL][idx];
 }
 
-/*
- * Take gfn and return the reverse mapping to it.
- */
-static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, struct kvm_mmu_page *sp)
+static struct kvm_rmap_head *gfn_to_rmap(struct kvm *kvm, gfn_t gfn,
+					 struct kvm_mmu_page *sp)
 {
 	struct kvm_memslots *slots;
 	struct kvm_memory_slot *slot;
@@ -1065,24 +1069,24 @@ static bool rmap_can_add(struct kvm_vcpu *vcpu)
 static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
 	struct kvm_mmu_page *sp;
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 
 	sp = page_header(__pa(spte));
 	kvm_mmu_page_set_gfn(sp, spte - sp->spt, gfn);
-	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp);
-	return pte_list_add(vcpu, spte, rmapp);
+	rmap_head = gfn_to_rmap(vcpu->kvm, gfn, sp);
+	return pte_list_add(vcpu, spte, rmap_head);
 }
 
 static void rmap_remove(struct kvm *kvm, u64 *spte)
 {
 	struct kvm_mmu_page *sp;
 	gfn_t gfn;
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 
 	sp = page_header(__pa(spte));
 	gfn = kvm_mmu_page_get_gfn(sp, spte - sp->spt);
-	rmapp = gfn_to_rmap(kvm, gfn, sp);
-	pte_list_remove(spte, rmapp);
+	rmap_head = gfn_to_rmap(kvm, gfn, sp);
+	pte_list_remove(spte, rmap_head);
 }
 
 /*
@@ -1102,19 +1106,26 @@ struct rmap_iterator {
  *
  * Returns sptep if found, NULL otherwise.
  */
-static u64 *rmap_get_first(unsigned long rmap, struct rmap_iterator *iter)
+static u64 *rmap_get_first(struct kvm_rmap_head *rmap_head,
+			   struct rmap_iterator *iter)
 {
-	if (!rmap)
+	u64 *sptep;
+
+	if (!rmap_head->val)
 		return NULL;
 
-	if (!(rmap & 1)) {
+	if (!(rmap_head->val & 1)) {
 		iter->desc = NULL;
-		return (u64 *)rmap;
+		sptep = (u64 *)rmap_head->val;
+		goto out;
 	}
 
-	iter->desc = (struct pte_list_desc *)(rmap & ~1ul);
+	iter->desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
 	iter->pos = 0;
-	return iter->desc->sptes[iter->pos];
+	sptep = iter->desc->sptes[iter->pos];
+out:
+	BUG_ON(!is_shadow_present_pte(*sptep));
+	return sptep;
 }
 
 /*
@@ -1124,14 +1135,14 @@ static u64 *rmap_get_first(unsigned long rmap, struct rmap_iterator *iter)
  */
 static u64 *rmap_get_next(struct rmap_iterator *iter)
 {
+	u64 *sptep;
+
 	if (iter->desc) {
 		if (iter->pos < PTE_LIST_EXT - 1) {
-			u64 *sptep;
-
 			++iter->pos;
 			sptep = iter->desc->sptes[iter->pos];
 			if (sptep)
-				return sptep;
+				goto out;
 		}
 
 		iter->desc = iter->desc->more;
@@ -1139,17 +1150,20 @@ static u64 *rmap_get_next(struct rmap_iterator *iter)
 		if (iter->desc) {
 			iter->pos = 0;
 			/* desc->sptes[0] cannot be NULL */
-			return iter->desc->sptes[iter->pos];
+			sptep = iter->desc->sptes[iter->pos];
+			goto out;
 		}
 	}
 
 	return NULL;
+out:
+	BUG_ON(!is_shadow_present_pte(*sptep));
+	return sptep;
 }
 
-#define for_each_rmap_spte(_rmap_, _iter_, _spte_)			    \
-	   for (_spte_ = rmap_get_first(*_rmap_, _iter_);		    \
-		_spte_ && ({BUG_ON(!is_shadow_present_pte(*_spte_)); 1;});  \
-			_spte_ = rmap_get_next(_iter_))
+#define for_each_rmap_spte(_rmap_head_, _iter_, _spte_)			\
+	for (_spte_ = rmap_get_first(_rmap_head_, _iter_);		\
+	     _spte_; _spte_ = rmap_get_next(_iter_))
 
 static void drop_spte(struct kvm *kvm, u64 *sptep)
 {
@@ -1207,14 +1221,15 @@ static bool spte_write_protect(struct kvm *kvm, u64 *sptep, bool pt_protect)
 	return mmu_spte_update(sptep, spte);
 }
 
-static bool __rmap_write_protect(struct kvm *kvm, unsigned long *rmapp,
+static bool __rmap_write_protect(struct kvm *kvm,
+				 struct kvm_rmap_head *rmap_head,
 				 bool pt_protect)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
 	bool flush = false;
 
-	for_each_rmap_spte(rmapp, &iter, sptep)
+	for_each_rmap_spte(rmap_head, &iter, sptep)
 		flush |= spte_write_protect(kvm, sptep, pt_protect);
 
 	return flush;
@@ -1231,13 +1246,13 @@ static bool spte_clear_dirty(struct kvm *kvm, u64 *sptep)
 	return mmu_spte_update(sptep, spte);
 }
 
-static bool __rmap_clear_dirty(struct kvm *kvm, unsigned long *rmapp)
+static bool __rmap_clear_dirty(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
 	bool flush = false;
 
-	for_each_rmap_spte(rmapp, &iter, sptep)
+	for_each_rmap_spte(rmap_head, &iter, sptep)
 		flush |= spte_clear_dirty(kvm, sptep);
 
 	return flush;
@@ -1254,13 +1269,13 @@ static bool spte_set_dirty(struct kvm *kvm, u64 *sptep)
 	return mmu_spte_update(sptep, spte);
 }
 
-static bool __rmap_set_dirty(struct kvm *kvm, unsigned long *rmapp)
+static bool __rmap_set_dirty(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
 	bool flush = false;
 
-	for_each_rmap_spte(rmapp, &iter, sptep)
+	for_each_rmap_spte(rmap_head, &iter, sptep)
 		flush |= spte_set_dirty(kvm, sptep);
 
 	return flush;
@@ -1280,12 +1295,12 @@ static void kvm_mmu_write_protect_pt_masked(struct kvm *kvm,
 				     struct kvm_memory_slot *slot,
 				     gfn_t gfn_offset, unsigned long mask)
 {
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 
 	while (mask) {
-		rmapp = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
-				      PT_PAGE_TABLE_LEVEL, slot);
-		__rmap_write_protect(kvm, rmapp, false);
+		rmap_head = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
+					  PT_PAGE_TABLE_LEVEL, slot);
+		__rmap_write_protect(kvm, rmap_head, false);
 
 		/* clear the first set bit */
 		mask &= mask - 1;
@@ -1305,12 +1320,12 @@ void kvm_mmu_clear_dirty_pt_masked(struct kvm *kvm,
 				     struct kvm_memory_slot *slot,
 				     gfn_t gfn_offset, unsigned long mask)
 {
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 
 	while (mask) {
-		rmapp = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
-				      PT_PAGE_TABLE_LEVEL, slot);
-		__rmap_clear_dirty(kvm, rmapp);
+		rmap_head = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
+					  PT_PAGE_TABLE_LEVEL, slot);
+		__rmap_clear_dirty(kvm, rmap_head);
 
 		/* clear the first set bit */
 		mask &= mask - 1;
@@ -1339,31 +1354,36 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
 		kvm_mmu_write_protect_pt_masked(kvm, slot, gfn_offset, mask);
 }
 
-static bool rmap_write_protect(struct kvm_vcpu *vcpu, u64 gfn)
+bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm,
+				    struct kvm_memory_slot *slot, u64 gfn)
 {
-	struct kvm_memory_slot *slot;
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 	int i;
 	bool write_protected = false;
 
-	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
-
 	for (i = PT_PAGE_TABLE_LEVEL; i <= PT_MAX_HUGEPAGE_LEVEL; ++i) {
-		rmapp = __gfn_to_rmap(gfn, i, slot);
-		write_protected |= __rmap_write_protect(vcpu->kvm, rmapp, true);
+		rmap_head = __gfn_to_rmap(gfn, i, slot);
+		write_protected |= __rmap_write_protect(kvm, rmap_head, true);
 	}
 
 	return write_protected;
 }
 
-static bool kvm_zap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+static bool rmap_write_protect(struct kvm_vcpu *vcpu, u64 gfn)
+{
+	struct kvm_memory_slot *slot;
+
+	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
+	return kvm_mmu_slot_gfn_write_protect(vcpu->kvm, slot, gfn);
+}
+
+static bool kvm_zap_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
 	bool flush = false;
 
-	while ((sptep = rmap_get_first(*rmapp, &iter))) {
-		BUG_ON(!(*sptep & PT_PRESENT_MASK));
+	while ((sptep = rmap_get_first(rmap_head, &iter))) {
 		rmap_printk("%s: spte %p %llx.\n", __func__, sptep, *sptep);
 
 		drop_spte(kvm, sptep);
@@ -1373,14 +1393,14 @@ static bool kvm_zap_rmapp(struct kvm *kvm, unsigned long *rmapp)
 	return flush;
 }
 
-static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
+static int kvm_unmap_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
 			   struct kvm_memory_slot *slot, gfn_t gfn, int level,
 			   unsigned long data)
 {
-	return kvm_zap_rmapp(kvm, rmapp);
+	return kvm_zap_rmapp(kvm, rmap_head);
 }
 
-static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
+static int kvm_set_pte_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
 			     struct kvm_memory_slot *slot, gfn_t gfn, int level,
 			     unsigned long data)
 {
@@ -1389,13 +1409,13 @@ static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
 	int need_flush = 0;
 	u64 new_spte;
 	pte_t *ptep = (pte_t *)data;
-	pfn_t new_pfn;
+	kvm_pfn_t new_pfn;
 
 	WARN_ON(pte_huge(*ptep));
 	new_pfn = pte_pfn(*ptep);
 
 restart:
-	for_each_rmap_spte(rmapp, &iter, sptep) {
+	for_each_rmap_spte(rmap_head, &iter, sptep) {
 		rmap_printk("kvm_set_pte_rmapp: spte %p %llx gfn %llx (%d)\n",
 			     sptep, *sptep, gfn, level);
 
@@ -1433,11 +1453,11 @@ struct slot_rmap_walk_iterator {
 
 	/* output fields. */
 	gfn_t gfn;
-	unsigned long *rmap;
+	struct kvm_rmap_head *rmap;
 	int level;
 
 	/* private field. */
-	unsigned long *end_rmap;
+	struct kvm_rmap_head *end_rmap;
 };
 
 static void
@@ -1496,7 +1516,7 @@ static int kvm_handle_hva_range(struct kvm *kvm,
 				unsigned long end,
 				unsigned long data,
 				int (*handler)(struct kvm *kvm,
-					       unsigned long *rmapp,
+					       struct kvm_rmap_head *rmap_head,
 					       struct kvm_memory_slot *slot,
 					       gfn_t gfn,
 					       int level,
@@ -1540,7 +1560,8 @@ static int kvm_handle_hva_range(struct kvm *kvm,
 
 static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 			  unsigned long data,
-			  int (*handler)(struct kvm *kvm, unsigned long *rmapp,
+			  int (*handler)(struct kvm *kvm,
+					 struct kvm_rmap_head *rmap_head,
 					 struct kvm_memory_slot *slot,
 					 gfn_t gfn, int level,
 					 unsigned long data))
@@ -1563,7 +1584,7 @@ void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
 	kvm_handle_hva(kvm, hva, (unsigned long)&pte, kvm_set_pte_rmapp);
 }
 
-static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
+static int kvm_age_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
 			 struct kvm_memory_slot *slot, gfn_t gfn, int level,
 			 unsigned long data)
 {
@@ -1573,18 +1594,19 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
 
 	BUG_ON(!shadow_accessed_mask);
 
-	for_each_rmap_spte(rmapp, &iter, sptep)
+	for_each_rmap_spte(rmap_head, &iter, sptep) {
 		if (*sptep & shadow_accessed_mask) {
 			young = 1;
 			clear_bit((ffs(shadow_accessed_mask) - 1),
 				 (unsigned long *)sptep);
 		}
+	}
 
 	trace_kvm_age_page(gfn, level, slot, young);
 	return young;
 }
 
-static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
+static int kvm_test_age_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
 			      struct kvm_memory_slot *slot, gfn_t gfn,
 			      int level, unsigned long data)
 {
@@ -1600,11 +1622,12 @@ static int kvm_test_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
 	if (!shadow_accessed_mask)
 		goto out;
 
-	for_each_rmap_spte(rmapp, &iter, sptep)
+	for_each_rmap_spte(rmap_head, &iter, sptep) {
 		if (*sptep & shadow_accessed_mask) {
 			young = 1;
 			break;
 		}
+	}
 out:
 	return young;
 }
@@ -1613,14 +1636,14 @@ out:
 
 static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 	struct kvm_mmu_page *sp;
 
 	sp = page_header(__pa(spte));
 
-	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp);
+	rmap_head = gfn_to_rmap(vcpu->kvm, gfn, sp);
 
-	kvm_unmap_rmapp(vcpu->kvm, rmapp, NULL, gfn, sp->role.level, 0);
+	kvm_unmap_rmapp(vcpu->kvm, rmap_head, NULL, gfn, sp->role.level, 0);
 	kvm_flush_remote_tlbs(vcpu->kvm);
 }
 
@@ -1720,8 +1743,7 @@ static void drop_parent_pte(struct kvm_mmu_page *sp,
 	mmu_spte_clear_no_track(parent_pte);
 }
 
-static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
-					       u64 *parent_pte, int direct)
+static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu, int direct)
 {
 	struct kvm_mmu_page *sp;
 
@@ -1737,8 +1759,6 @@ static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
 	 * this feature. See the comments in kvm_zap_obsolete_pages().
 	 */
 	list_add(&sp->link, &vcpu->kvm->arch.active_mmu_pages);
-	sp->parent_ptes = 0;
-	mmu_page_add_parent_pte(vcpu, sp, parent_pte);
 	kvm_mod_used_mmu_pages(vcpu->kvm, +1);
 	return sp;
 }
@@ -1746,7 +1766,12 @@ static struct kvm_mmu_page *kvm_mmu_alloc_page(struct kvm_vcpu *vcpu,
 static void mark_unsync(u64 *spte);
 static void kvm_mmu_mark_parents_unsync(struct kvm_mmu_page *sp)
 {
-	pte_list_walk(&sp->parent_ptes, mark_unsync);
+	u64 *sptep;
+	struct rmap_iterator iter;
+
+	for_each_rmap_spte(&sp->parent_ptes, &iter, sptep) {
+		mark_unsync(sptep);
+	}
 }
 
 static void mark_unsync(u64 *spte)
@@ -1766,7 +1791,7 @@ static void mark_unsync(u64 *spte)
 static int nonpaging_sync_page(struct kvm_vcpu *vcpu,
 			       struct kvm_mmu_page *sp)
 {
-	return 1;
+	return 0;
 }
 
 static void nonpaging_invlpg(struct kvm_vcpu *vcpu, gva_t gva)
@@ -1806,6 +1831,13 @@ static int mmu_pages_add(struct kvm_mmu_pages *pvec, struct kvm_mmu_page *sp,
 	return (pvec->nr == KVM_PAGE_ARRAY_NR);
 }
 
+static inline void clear_unsync_child_bit(struct kvm_mmu_page *sp, int idx)
+{
+	--sp->unsync_children;
+	WARN_ON((int)sp->unsync_children < 0);
+	__clear_bit(idx, sp->unsync_child_bitmap);
+}
+
 static int __mmu_unsync_walk(struct kvm_mmu_page *sp,
 			   struct kvm_mmu_pages *pvec)
 {
@@ -1815,8 +1847,10 @@ static int __mmu_unsync_walk(struct kvm_mmu_page *sp,
 		struct kvm_mmu_page *child;
 		u64 ent = sp->spt[i];
 
-		if (!is_shadow_present_pte(ent) || is_large_pte(ent))
-			goto clear_child_bitmap;
+		if (!is_shadow_present_pte(ent) || is_large_pte(ent)) {
+			clear_unsync_child_bit(sp, i);
+			continue;
+		}
 
 		child = page_header(ent & PT64_BASE_ADDR_MASK);
 
@@ -1825,38 +1859,34 @@ static int __mmu_unsync_walk(struct kvm_mmu_page *sp,
 				return -ENOSPC;
 
 			ret = __mmu_unsync_walk(child, pvec);
-			if (!ret)
-				goto clear_child_bitmap;
-			else if (ret > 0)
+			if (!ret) {
+				clear_unsync_child_bit(sp, i);
+				continue;
+			} else if (ret > 0) {
 				nr_unsync_leaf += ret;
-			else
+			} else
 				return ret;
 		} else if (child->unsync) {
 			nr_unsync_leaf++;
 			if (mmu_pages_add(pvec, child, i))
 				return -ENOSPC;
 		} else
-			 goto clear_child_bitmap;
-
-		continue;
-
-clear_child_bitmap:
-		__clear_bit(i, sp->unsync_child_bitmap);
-		sp->unsync_children--;
-		WARN_ON((int)sp->unsync_children < 0);
+			clear_unsync_child_bit(sp, i);
 	}
 
-
 	return nr_unsync_leaf;
 }
 
+#define INVALID_INDEX (-1)
+
 static int mmu_unsync_walk(struct kvm_mmu_page *sp,
 			   struct kvm_mmu_pages *pvec)
 {
+	pvec->nr = 0;
 	if (!sp->unsync_children)
 		return 0;
 
-	mmu_pages_add(pvec, sp, 0);
+	mmu_pages_add(pvec, sp, INVALID_INDEX);
 	return __mmu_unsync_walk(sp, pvec);
 }
 
@@ -1893,37 +1923,35 @@ static void kvm_mmu_commit_zap_page(struct kvm *kvm,
 		if ((_sp)->role.direct || (_sp)->role.invalid) {} else
 
 /* @sp->gfn should be write-protected at the call site */
-static int __kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
-			   struct list_head *invalid_list, bool clear_unsync)
+static bool __kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
+			    struct list_head *invalid_list)
 {
 	if (sp->role.cr4_pae != !!is_pae(vcpu)) {
 		kvm_mmu_prepare_zap_page(vcpu->kvm, sp, invalid_list);
-		return 1;
+		return false;
 	}
 
-	if (clear_unsync)
-		kvm_unlink_unsync_page(vcpu->kvm, sp);
-
-	if (vcpu->arch.mmu.sync_page(vcpu, sp)) {
+	if (vcpu->arch.mmu.sync_page(vcpu, sp) == 0) {
 		kvm_mmu_prepare_zap_page(vcpu->kvm, sp, invalid_list);
-		return 1;
+		return false;
 	}
 
-	kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
-	return 0;
+	return true;
 }
 
-static int kvm_sync_page_transient(struct kvm_vcpu *vcpu,
-				   struct kvm_mmu_page *sp)
+static void kvm_mmu_flush_or_zap(struct kvm_vcpu *vcpu,
+				 struct list_head *invalid_list,
+				 bool remote_flush, bool local_flush)
 {
-	LIST_HEAD(invalid_list);
-	int ret;
-
-	ret = __kvm_sync_page(vcpu, sp, &invalid_list, false);
-	if (ret)
-		kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
+	if (!list_empty(invalid_list)) {
+		kvm_mmu_commit_zap_page(vcpu->kvm, invalid_list);
+		return;
+	}
 
-	return ret;
+	if (remote_flush)
+		kvm_flush_remote_tlbs(vcpu->kvm);
+	else if (local_flush)
+		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
 }
 
 #ifdef CONFIG_KVM_MMU_AUDIT
@@ -1933,46 +1961,38 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, int point) { }
 static void mmu_audit_disable(void) { }
 #endif
 
-static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
+static bool kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 			 struct list_head *invalid_list)
 {
-	return __kvm_sync_page(vcpu, sp, invalid_list, true);
+	kvm_unlink_unsync_page(vcpu->kvm, sp);
+	return __kvm_sync_page(vcpu, sp, invalid_list);
 }
 
 /* @gfn should be write-protected at the call site */
-static void kvm_sync_pages(struct kvm_vcpu *vcpu,  gfn_t gfn)
+static bool kvm_sync_pages(struct kvm_vcpu *vcpu, gfn_t gfn,
+			   struct list_head *invalid_list)
 {
 	struct kvm_mmu_page *s;
-	LIST_HEAD(invalid_list);
-	bool flush = false;
+	bool ret = false;
 
 	for_each_gfn_indirect_valid_sp(vcpu->kvm, s, gfn) {
 		if (!s->unsync)
 			continue;
 
 		WARN_ON(s->role.level != PT_PAGE_TABLE_LEVEL);
-		kvm_unlink_unsync_page(vcpu->kvm, s);
-		if ((s->role.cr4_pae != !!is_pae(vcpu)) ||
-			(vcpu->arch.mmu.sync_page(vcpu, s))) {
-			kvm_mmu_prepare_zap_page(vcpu->kvm, s, &invalid_list);
-			continue;
-		}
-		flush = true;
+		ret |= kvm_sync_page(vcpu, s, invalid_list);
 	}
 
-	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
-	if (flush)
-		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+	return ret;
 }
 
 struct mmu_page_path {
-	struct kvm_mmu_page *parent[PT64_ROOT_LEVEL-1];
-	unsigned int idx[PT64_ROOT_LEVEL-1];
+	struct kvm_mmu_page *parent[PT64_ROOT_LEVEL];
+	unsigned int idx[PT64_ROOT_LEVEL];
 };
 
 #define for_each_sp(pvec, sp, parents, i)			\
-		for (i = mmu_pages_next(&pvec, &parents, -1),	\
-			sp = pvec.page[i].sp;			\
+		for (i = mmu_pages_first(&pvec, &parents);	\
 			i < pvec.nr && ({ sp = pvec.page[i].sp; 1;});	\
 			i = mmu_pages_next(&pvec, &parents, i))
 
@@ -1984,19 +2004,43 @@ static int mmu_pages_next(struct kvm_mmu_pages *pvec,
 
 	for (n = i+1; n < pvec->nr; n++) {
 		struct kvm_mmu_page *sp = pvec->page[n].sp;
+		unsigned idx = pvec->page[n].idx;
+		int level = sp->role.level;
 
-		if (sp->role.level == PT_PAGE_TABLE_LEVEL) {
-			parents->idx[0] = pvec->page[n].idx;
-			return n;
-		}
+		parents->idx[level-1] = idx;
+		if (level == PT_PAGE_TABLE_LEVEL)
+			break;
 
-		parents->parent[sp->role.level-2] = sp;
-		parents->idx[sp->role.level-1] = pvec->page[n].idx;
+		parents->parent[level-2] = sp;
 	}
 
 	return n;
 }
 
+static int mmu_pages_first(struct kvm_mmu_pages *pvec,
+			   struct mmu_page_path *parents)
+{
+	struct kvm_mmu_page *sp;
+	int level;
+
+	if (pvec->nr == 0)
+		return 0;
+
+	WARN_ON(pvec->page[0].idx != INVALID_INDEX);
+
+	sp = pvec->page[0].sp;
+	level = sp->role.level;
+	WARN_ON(level == PT_PAGE_TABLE_LEVEL);
+
+	parents->parent[level-2] = sp;
+
+	/* Also set up a sentinel.  Further entries in pvec are all
+	 * children of sp, so this element is never overwritten.
+	 */
+	parents->parent[level-1] = NULL;
+	return mmu_pages_next(pvec, parents, 0);
+}
+
 static void mmu_pages_clear_parents(struct mmu_page_path *parents)
 {
 	struct kvm_mmu_page *sp;
@@ -2004,24 +2048,14 @@ static void mmu_pages_clear_parents(struct mmu_page_path *parents)
 
 	do {
 		unsigned int idx = parents->idx[level];
-
 		sp = parents->parent[level];
 		if (!sp)
 			return;
 
-		--sp->unsync_children;
-		WARN_ON((int)sp->unsync_children < 0);
-		__clear_bit(idx, sp->unsync_child_bitmap);
+		WARN_ON(idx == INVALID_INDEX);
+		clear_unsync_child_bit(sp, idx);
 		level++;
-	} while (level < PT64_ROOT_LEVEL-1 && !sp->unsync_children);
-}
-
-static void kvm_mmu_pages_init(struct kvm_mmu_page *parent,
-			       struct mmu_page_path *parents,
-			       struct kvm_mmu_pages *pvec)
-{
-	parents->parent[parent->role.level-1] = NULL;
-	pvec->nr = 0;
+	} while (!sp->unsync_children);
 }
 
 static void mmu_sync_children(struct kvm_vcpu *vcpu,
@@ -2032,38 +2066,36 @@ static void mmu_sync_children(struct kvm_vcpu *vcpu,
 	struct mmu_page_path parents;
 	struct kvm_mmu_pages pages;
 	LIST_HEAD(invalid_list);
+	bool flush = false;
 
-	kvm_mmu_pages_init(parent, &parents, &pages);
 	while (mmu_unsync_walk(parent, &pages)) {
 		bool protected = false;
 
 		for_each_sp(pages, sp, parents, i)
 			protected |= rmap_write_protect(vcpu, sp->gfn);
 
-		if (protected)
+		if (protected) {
 			kvm_flush_remote_tlbs(vcpu->kvm);
+			flush = false;
+		}
 
 		for_each_sp(pages, sp, parents, i) {
-			kvm_sync_page(vcpu, sp, &invalid_list);
+			flush |= kvm_sync_page(vcpu, sp, &invalid_list);
 			mmu_pages_clear_parents(&parents);
 		}
-		kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
-		cond_resched_lock(&vcpu->kvm->mmu_lock);
-		kvm_mmu_pages_init(parent, &parents, &pages);
+		if (need_resched() || spin_needbreak(&vcpu->kvm->mmu_lock)) {
+			kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush);
+			cond_resched_lock(&vcpu->kvm->mmu_lock);
+			flush = false;
+		}
 	}
-}
 
-static void init_shadow_page_table(struct kvm_mmu_page *sp)
-{
-	int i;
-
-	for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
-		sp->spt[i] = 0ull;
+	kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush);
 }
 
 static void __clear_sp_write_flooding_count(struct kvm_mmu_page *sp)
 {
-	sp->write_flooding_count = 0;
+	atomic_set(&sp->write_flooding_count,  0);
 }
 
 static void clear_sp_write_flooding_count(u64 *spte)
@@ -2083,13 +2115,14 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 					     gva_t gaddr,
 					     unsigned level,
 					     int direct,
-					     unsigned access,
-					     u64 *parent_pte)
+					     unsigned access)
 {
 	union kvm_mmu_page_role role;
 	unsigned quadrant;
 	struct kvm_mmu_page *sp;
 	bool need_sync = false;
+	bool flush = false;
+	LIST_HEAD(invalid_list);
 
 	role = vcpu->arch.mmu.base_role;
 	role.level = level;
@@ -2113,39 +2146,52 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 		if (sp->role.word != role.word)
 			continue;
 
-		if (sp->unsync && kvm_sync_page_transient(vcpu, sp))
-			break;
+		if (sp->unsync) {
+			/* The page is good, but __kvm_sync_page might still end
+			 * up zapping it.  If so, break in order to rebuild it.
+			 */
+			if (!__kvm_sync_page(vcpu, sp, &invalid_list))
+				break;
 
-		mmu_page_add_parent_pte(vcpu, sp, parent_pte);
-		if (sp->unsync_children) {
+			WARN_ON(!list_empty(&invalid_list));
+			kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
+		}
+
+		if (sp->unsync_children)
 			kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
-			kvm_mmu_mark_parents_unsync(sp);
-		} else if (sp->unsync)
-			kvm_mmu_mark_parents_unsync(sp);
 
 		__clear_sp_write_flooding_count(sp);
 		trace_kvm_mmu_get_page(sp, false);
 		return sp;
 	}
+
 	++vcpu->kvm->stat.mmu_cache_miss;
-	sp = kvm_mmu_alloc_page(vcpu, parent_pte, direct);
-	if (!sp)
-		return sp;
+
+	sp = kvm_mmu_alloc_page(vcpu, direct);
+
 	sp->gfn = gfn;
 	sp->role = role;
 	hlist_add_head(&sp->hash_link,
 		&vcpu->kvm->arch.mmu_page_hash[kvm_page_table_hashfn(gfn)]);
 	if (!direct) {
-		if (rmap_write_protect(vcpu, gfn))
+		/*
+		 * we should do write protection before syncing pages
+		 * otherwise the content of the synced shadow page may
+		 * be inconsistent with guest page table.
+		 */
+		account_shadowed(vcpu->kvm, sp);
+		if (level == PT_PAGE_TABLE_LEVEL &&
+		      rmap_write_protect(vcpu, gfn))
 			kvm_flush_remote_tlbs(vcpu->kvm);
-		if (level > PT_PAGE_TABLE_LEVEL && need_sync)
-			kvm_sync_pages(vcpu, gfn);
 
-		account_shadowed(vcpu->kvm, sp);
+		if (level > PT_PAGE_TABLE_LEVEL && need_sync)
+			flush |= kvm_sync_pages(vcpu, gfn, &invalid_list);
 	}
 	sp->mmu_valid_gen = vcpu->kvm->arch.mmu_valid_gen;
-	init_shadow_page_table(sp);
+	clear_page(sp->spt);
 	trace_kvm_mmu_get_page(sp, true);
+
+	kvm_mmu_flush_or_zap(vcpu, &invalid_list, false, flush);
 	return sp;
 }
 
@@ -2198,7 +2244,8 @@ static void shadow_walk_next(struct kvm_shadow_walk_iterator *iterator)
 	return __shadow_walk_next(iterator, *iterator->sptep);
 }
 
-static void link_shadow_page(u64 *sptep, struct kvm_mmu_page *sp, bool accessed)
+static void link_shadow_page(struct kvm_vcpu *vcpu, u64 *sptep,
+			     struct kvm_mmu_page *sp)
 {
 	u64 spte;
 
@@ -2206,12 +2253,14 @@ static void link_shadow_page(u64 *sptep, struct kvm_mmu_page *sp, bool accessed)
 			VMX_EPT_WRITABLE_MASK != PT_WRITABLE_MASK);
 
 	spte = __pa(sp->spt) | PT_PRESENT_MASK | PT_WRITABLE_MASK |
-	       shadow_user_mask | shadow_x_mask;
-
-	if (accessed)
-		spte |= shadow_accessed_mask;
+	       shadow_user_mask | shadow_x_mask | shadow_accessed_mask;
 
 	mmu_spte_set(sptep, spte);
+
+	mmu_page_add_parent_pte(vcpu, sp, sptep);
+
+	if (sp->unsync_children || sp->unsync)
+		mark_unsync(sptep);
 }
 
 static void validate_direct_spte(struct kvm_vcpu *vcpu, u64 *sptep,
@@ -2270,17 +2319,12 @@ static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 		mmu_page_zap_pte(kvm, sp, sp->spt + i);
 }
 
-static void kvm_mmu_put_page(struct kvm_mmu_page *sp, u64 *parent_pte)
-{
-	mmu_page_remove_parent_pte(sp, parent_pte);
-}
-
 static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
 
-	while ((sptep = rmap_get_first(sp->parent_ptes, &iter)))
+	while ((sptep = rmap_get_first(&sp->parent_ptes, &iter)))
 		drop_parent_pte(sp, sptep);
 }
 
@@ -2295,7 +2339,6 @@ static int mmu_zap_unsync_children(struct kvm *kvm,
 	if (parent->role.level == PT_PAGE_TABLE_LEVEL)
 		return 0;
 
-	kvm_mmu_pages_init(parent, &parents, &pages);
 	while (mmu_unsync_walk(parent, &pages)) {
 		struct kvm_mmu_page *sp;
 
@@ -2304,7 +2347,6 @@ static int mmu_zap_unsync_children(struct kvm *kvm,
 			mmu_pages_clear_parents(&parents);
 			zapped++;
 		}
-		kvm_mmu_pages_init(parent, &parents, &pages);
 	}
 
 	return zapped;
@@ -2355,14 +2397,13 @@ static void kvm_mmu_commit_zap_page(struct kvm *kvm,
 		return;
 
 	/*
-	 * wmb: make sure everyone sees our modifications to the page tables
-	 * rmb: make sure we see changes to vcpu->mode
-	 */
-	smp_mb();
-
-	/*
-	 * Wait for all vcpus to exit guest mode and/or lockless shadow
-	 * page table walks.
+	 * We need to make sure everyone sees our modifications to
+	 * the page tables and see changes to vcpu->mode here. The barrier
+	 * in the kvm_flush_remote_tlbs() achieves this. This pairs
+	 * with vcpu_enter_guest and walk_shadow_page_lockless_begin/end.
+	 *
+	 * In addition, kvm_flush_remote_tlbs waits for all vcpus to exit
+	 * guest mode and/or lockless shadow page table walks.
 	 */
 	kvm_flush_remote_tlbs(kvm);
 
@@ -2380,8 +2421,8 @@ static bool prepare_zap_oldest_mmu_page(struct kvm *kvm,
 	if (list_empty(&kvm->arch.active_mmu_pages))
 		return false;
 
-	sp = list_entry(kvm->arch.active_mmu_pages.prev,
-			struct kvm_mmu_page, link);
+	sp = list_last_entry(&kvm->arch.active_mmu_pages,
+			     struct kvm_mmu_page, link);
 	kvm_mmu_prepare_zap_page(kvm, sp, invalid_list);
 
 	return true;
@@ -2434,7 +2475,7 @@ int kvm_mmu_unprotect_page(struct kvm *kvm, gfn_t gfn)
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page);
 
-static void __kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
+static void kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 {
 	trace_kvm_mmu_unsync_page(sp);
 	++vcpu->kvm->stat.mmu_unsync;
@@ -2443,40 +2484,29 @@ static void __kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	kvm_mmu_mark_parents_unsync(sp);
 }
 
-static void kvm_unsync_pages(struct kvm_vcpu *vcpu,  gfn_t gfn)
+static bool mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
+				   bool can_unsync)
 {
-	struct kvm_mmu_page *s;
-
-	for_each_gfn_indirect_valid_sp(vcpu->kvm, s, gfn) {
-		if (s->unsync)
-			continue;
-		WARN_ON(s->role.level != PT_PAGE_TABLE_LEVEL);
-		__kvm_unsync_page(vcpu, s);
-	}
-}
+	struct kvm_mmu_page *sp;
 
-static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
-				  bool can_unsync)
-{
-	struct kvm_mmu_page *s;
-	bool need_unsync = false;
+	if (kvm_page_track_is_active(vcpu, gfn, KVM_PAGE_TRACK_WRITE))
+		return true;
 
-	for_each_gfn_indirect_valid_sp(vcpu->kvm, s, gfn) {
+	for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) {
 		if (!can_unsync)
-			return 1;
+			return true;
 
-		if (s->role.level != PT_PAGE_TABLE_LEVEL)
-			return 1;
+		if (sp->unsync)
+			continue;
 
-		if (!s->unsync)
-			need_unsync = true;
+		WARN_ON(sp->role.level != PT_PAGE_TABLE_LEVEL);
+		kvm_unsync_page(vcpu, sp);
 	}
-	if (need_unsync)
-		kvm_unsync_pages(vcpu, gfn);
-	return 0;
+
+	return false;
 }
 
-static bool kvm_is_mmio_pfn(pfn_t pfn)
+static bool kvm_is_mmio_pfn(kvm_pfn_t pfn)
 {
 	if (pfn_valid(pfn))
 		return !is_zero_pfn(pfn) && PageReserved(pfn_to_page(pfn));
@@ -2486,7 +2516,7 @@ static bool kvm_is_mmio_pfn(pfn_t pfn)
 
 static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int level,
-		    gfn_t gfn, pfn_t pfn, bool speculative,
+		    gfn_t gfn, kvm_pfn_t pfn, bool speculative,
 		    bool can_unsync, bool host_writable)
 {
 	u64 spte;
@@ -2529,7 +2559,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		 * be fixed if guest refault.
 		 */
 		if (level > PT_PAGE_TABLE_LEVEL &&
-		    has_wrprotected_page(vcpu, gfn, level))
+		    mmu_gfn_lpage_is_disallowed(vcpu, gfn, level))
 			goto done;
 
 		spte |= PT_WRITABLE_MASK | SPTE_MMU_WRITEABLE;
@@ -2564,18 +2594,18 @@ done:
 	return ret;
 }
 
-static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
-			 unsigned pte_access, int write_fault, int *emulate,
-			 int level, gfn_t gfn, pfn_t pfn, bool speculative,
-			 bool host_writable)
+static bool mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep, unsigned pte_access,
+			 int write_fault, int level, gfn_t gfn, kvm_pfn_t pfn,
+			 bool speculative, bool host_writable)
 {
 	int was_rmapped = 0;
 	int rmap_count;
+	bool emulate = false;
 
 	pgprintk("%s: spte %llx write_fault %d gfn %llx\n", __func__,
 		 *sptep, write_fault, gfn);
 
-	if (is_rmap_spte(*sptep)) {
+	if (is_shadow_present_pte(*sptep)) {
 		/*
 		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
 		 * the parent of the now unreachable PTE.
@@ -2600,12 +2630,12 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	if (set_spte(vcpu, sptep, pte_access, level, gfn, pfn, speculative,
 	      true, host_writable)) {
 		if (write_fault)
-			*emulate = 1;
+			emulate = true;
 		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
 	}
 
-	if (unlikely(is_mmio_spte(*sptep) && emulate))
-		*emulate = 1;
+	if (unlikely(is_mmio_spte(*sptep)))
+		emulate = true;
 
 	pgprintk("%s: setting spte %llx\n", __func__, *sptep);
 	pgprintk("instantiating %s PTE (%s) at %llx (%llx) addr %p\n",
@@ -2624,9 +2654,11 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	}
 
 	kvm_release_pfn_clean(pfn);
+
+	return emulate;
 }
 
-static pfn_t pte_prefetch_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn,
+static kvm_pfn_t pte_prefetch_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn,
 				     bool no_dirty_log)
 {
 	struct kvm_memory_slot *slot;
@@ -2658,9 +2690,8 @@ static int direct_pte_prefetch_many(struct kvm_vcpu *vcpu,
 		return -1;
 
 	for (i = 0; i < ret; i++, gfn++, start++)
-		mmu_set_spte(vcpu, start, access, 0, NULL,
-			     sp->role.level, gfn, page_to_pfn(pages[i]),
-			     true, true);
+		mmu_set_spte(vcpu, start, access, 0, sp->role.level, gfn,
+			     page_to_pfn(pages[i]), true, true);
 
 	return 0;
 }
@@ -2708,9 +2739,8 @@ static void direct_pte_prefetch(struct kvm_vcpu *vcpu, u64 *sptep)
 	__direct_pte_prefetch(vcpu, sp, sptep);
 }
 
-static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
-			int map_writable, int level, gfn_t gfn, pfn_t pfn,
-			bool prefault)
+static int __direct_map(struct kvm_vcpu *vcpu, int write, int map_writable,
+			int level, gfn_t gfn, kvm_pfn_t pfn, bool prefault)
 {
 	struct kvm_shadow_walk_iterator iterator;
 	struct kvm_mmu_page *sp;
@@ -2722,9 +2752,9 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 
 	for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) {
 		if (iterator.level == level) {
-			mmu_set_spte(vcpu, iterator.sptep, ACC_ALL,
-				     write, &emulate, level, gfn, pfn,
-				     prefault, map_writable);
+			emulate = mmu_set_spte(vcpu, iterator.sptep, ACC_ALL,
+					       write, level, gfn, pfn, prefault,
+					       map_writable);
 			direct_pte_prefetch(vcpu, iterator.sptep);
 			++vcpu->stat.pf_fixed;
 			break;
@@ -2737,10 +2767,9 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 			base_addr &= PT64_LVL_ADDR_MASK(iterator.level);
 			pseudo_gfn = base_addr >> PAGE_SHIFT;
 			sp = kvm_mmu_get_page(vcpu, pseudo_gfn, iterator.addr,
-					      iterator.level - 1,
-					      1, ACC_ALL, iterator.sptep);
+					      iterator.level - 1, 1, ACC_ALL);
 
-			link_shadow_page(iterator.sptep, sp, true);
+			link_shadow_page(vcpu, iterator.sptep, sp);
 		}
 	}
 	return emulate;
@@ -2759,7 +2788,7 @@ static void kvm_send_hwpoison_signal(unsigned long address, struct task_struct *
 	send_sig_info(SIGBUS, &info, tsk);
 }
 
-static int kvm_handle_bad_page(struct kvm_vcpu *vcpu, gfn_t gfn, pfn_t pfn)
+static int kvm_handle_bad_page(struct kvm_vcpu *vcpu, gfn_t gfn, kvm_pfn_t pfn)
 {
 	/*
 	 * Do not cache the mmio info caused by writing the readonly gfn
@@ -2779,9 +2808,10 @@ static int kvm_handle_bad_page(struct kvm_vcpu *vcpu, gfn_t gfn, pfn_t pfn)
 }
 
 static void transparent_hugepage_adjust(struct kvm_vcpu *vcpu,
-					gfn_t *gfnp, pfn_t *pfnp, int *levelp)
+					gfn_t *gfnp, kvm_pfn_t *pfnp,
+					int *levelp)
 {
-	pfn_t pfn = *pfnp;
+	kvm_pfn_t pfn = *pfnp;
 	gfn_t gfn = *gfnp;
 	int level = *levelp;
 
@@ -2794,7 +2824,7 @@ static void transparent_hugepage_adjust(struct kvm_vcpu *vcpu,
 	if (!is_error_noslot_pfn(pfn) && !kvm_is_reserved_pfn(pfn) &&
 	    level == PT_PAGE_TABLE_LEVEL &&
 	    PageTransCompound(pfn_to_page(pfn)) &&
-	    !has_wrprotected_page(vcpu, gfn, PT_DIRECTORY_LEVEL)) {
+	    !mmu_gfn_lpage_is_disallowed(vcpu, gfn, PT_DIRECTORY_LEVEL)) {
 		unsigned long mask;
 		/*
 		 * mmu_notifier_retry was successful and we hold the
@@ -2820,22 +2850,18 @@ static void transparent_hugepage_adjust(struct kvm_vcpu *vcpu,
 }
 
 static bool handle_abnormal_pfn(struct kvm_vcpu *vcpu, gva_t gva, gfn_t gfn,
-				pfn_t pfn, unsigned access, int *ret_val)
+				kvm_pfn_t pfn, unsigned access, int *ret_val)
 {
-	bool ret = true;
-
 	/* The pfn is invalid, report the error! */
 	if (unlikely(is_error_pfn(pfn))) {
 		*ret_val = kvm_handle_bad_page(vcpu, gfn, pfn);
-		goto exit;
+		return true;
 	}
 
 	if (unlikely(is_noslot_pfn(pfn)))
 		vcpu_cache_mmio_info(vcpu, gva, gfn, access);
 
-	ret = false;
-exit:
-	return ret;
+	return false;
 }
 
 static bool page_fault_can_be_fast(u32 error_code)
@@ -2919,7 +2945,7 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level,
 	 * If the mapping has been changed, let the vcpu fault on the
 	 * same address again.
 	 */
-	if (!is_rmap_spte(spte)) {
+	if (!is_shadow_present_pte(spte)) {
 		ret = true;
 		goto exit;
 	}
@@ -2974,7 +3000,7 @@ exit:
 }
 
 static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
-			 gva_t gva, pfn_t *pfn, bool write, bool *writable);
+			 gva_t gva, kvm_pfn_t *pfn, bool write, bool *writable);
 static void make_mmu_pages_available(struct kvm_vcpu *vcpu);
 
 static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, u32 error_code,
@@ -2983,7 +3009,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, u32 error_code,
 	int r;
 	int level;
 	bool force_pt_level = false;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	unsigned long mmu_seq;
 	bool map_writable, write = error_code & PFERR_WRITE_MASK;
 
@@ -3018,11 +3044,9 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, u32 error_code,
 	make_mmu_pages_available(vcpu);
 	if (likely(!force_pt_level))
 		transparent_hugepage_adjust(vcpu, &gfn, &pfn, &level);
-	r = __direct_map(vcpu, v, write, map_writable, level, gfn, pfn,
-			 prefault);
+	r = __direct_map(vcpu, write, map_writable, level, gfn, pfn, prefault);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
-
 	return r;
 
 out_unlock:
@@ -3097,8 +3121,7 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
 		spin_lock(&vcpu->kvm->mmu_lock);
 		make_mmu_pages_available(vcpu);
-		sp = kvm_mmu_get_page(vcpu, 0, 0, PT64_ROOT_LEVEL,
-				      1, ACC_ALL, NULL);
+		sp = kvm_mmu_get_page(vcpu, 0, 0, PT64_ROOT_LEVEL, 1, ACC_ALL);
 		++sp->root_count;
 		spin_unlock(&vcpu->kvm->mmu_lock);
 		vcpu->arch.mmu.root_hpa = __pa(sp->spt);
@@ -3110,9 +3133,7 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
 			spin_lock(&vcpu->kvm->mmu_lock);
 			make_mmu_pages_available(vcpu);
 			sp = kvm_mmu_get_page(vcpu, i << (30 - PAGE_SHIFT),
-					      i << 30,
-					      PT32_ROOT_LEVEL, 1, ACC_ALL,
-					      NULL);
+					i << 30, PT32_ROOT_LEVEL, 1, ACC_ALL);
 			root = __pa(sp->spt);
 			++sp->root_count;
 			spin_unlock(&vcpu->kvm->mmu_lock);
@@ -3149,7 +3170,7 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 		spin_lock(&vcpu->kvm->mmu_lock);
 		make_mmu_pages_available(vcpu);
 		sp = kvm_mmu_get_page(vcpu, root_gfn, 0, PT64_ROOT_LEVEL,
-				      0, ACC_ALL, NULL);
+				      0, ACC_ALL);
 		root = __pa(sp->spt);
 		++sp->root_count;
 		spin_unlock(&vcpu->kvm->mmu_lock);
@@ -3182,9 +3203,8 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 		}
 		spin_lock(&vcpu->kvm->mmu_lock);
 		make_mmu_pages_available(vcpu);
-		sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
-				      PT32_ROOT_LEVEL, 0,
-				      ACC_ALL, NULL);
+		sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30, PT32_ROOT_LEVEL,
+				      0, ACC_ALL);
 		root = __pa(sp->spt);
 		++sp->root_count;
 		spin_unlock(&vcpu->kvm->mmu_lock);
@@ -3305,7 +3325,7 @@ static bool is_shadow_zero_bits_set(struct kvm_mmu *mmu, u64 spte, int level)
 	return __is_rsvd_bits_set(&mmu->shadow_zero_check, spte, level);
 }
 
-static bool quickly_check_mmio_pf(struct kvm_vcpu *vcpu, u64 addr, bool direct)
+static bool mmio_info_in_cache(struct kvm_vcpu *vcpu, u64 addr, bool direct)
 {
 	if (direct)
 		return vcpu_match_mmio_gpa(vcpu, addr);
@@ -3359,16 +3379,16 @@ exit:
 	return reserved;
 }
 
-int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct)
+int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, bool direct)
 {
 	u64 spte;
 	bool reserved;
 
-	if (quickly_check_mmio_pf(vcpu, addr, direct))
+	if (mmio_info_in_cache(vcpu, addr, direct))
 		return RET_MMIO_PF_EMULATE;
 
 	reserved = walk_shadow_page_get_mmio_spte(vcpu, addr, &spte);
-	if (unlikely(reserved))
+	if (WARN_ON(reserved))
 		return RET_MMIO_PF_BUG;
 
 	if (is_mmio_spte(spte)) {
@@ -3392,32 +3412,55 @@ int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct)
 	 */
 	return RET_MMIO_PF_RETRY;
 }
-EXPORT_SYMBOL_GPL(handle_mmio_page_fault_common);
+EXPORT_SYMBOL_GPL(handle_mmio_page_fault);
 
-static int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr,
-				  u32 error_code, bool direct)
+static bool page_fault_handle_page_track(struct kvm_vcpu *vcpu,
+					 u32 error_code, gfn_t gfn)
 {
-	int ret;
+	if (unlikely(error_code & PFERR_RSVD_MASK))
+		return false;
 
-	ret = handle_mmio_page_fault_common(vcpu, addr, direct);
-	WARN_ON(ret == RET_MMIO_PF_BUG);
-	return ret;
+	if (!(error_code & PFERR_PRESENT_MASK) ||
+	      !(error_code & PFERR_WRITE_MASK))
+		return false;
+
+	/*
+	 * guest is writing the page which is write tracked which can
+	 * not be fixed by page fault handler.
+	 */
+	if (kvm_page_track_is_active(vcpu, gfn, KVM_PAGE_TRACK_WRITE))
+		return true;
+
+	return false;
+}
+
+static void shadow_page_table_clear_flood(struct kvm_vcpu *vcpu, gva_t addr)
+{
+	struct kvm_shadow_walk_iterator iterator;
+	u64 spte;
+
+	if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+		return;
+
+	walk_shadow_page_lockless_begin(vcpu);
+	for_each_shadow_entry_lockless(vcpu, addr, iterator, spte) {
+		clear_sp_write_flooding_count(iterator.sptep);
+		if (!is_shadow_present_pte(spte))
+			break;
+	}
+	walk_shadow_page_lockless_end(vcpu);
 }
 
 static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gva_t gva,
 				u32 error_code, bool prefault)
 {
-	gfn_t gfn;
+	gfn_t gfn = gva >> PAGE_SHIFT;
 	int r;
 
 	pgprintk("%s: gva %lx error %x\n", __func__, gva, error_code);
 
-	if (unlikely(error_code & PFERR_RSVD_MASK)) {
-		r = handle_mmio_page_fault(vcpu, gva, error_code, true);
-
-		if (likely(r != RET_MMIO_PF_INVALID))
-			return r;
-	}
+	if (page_fault_handle_page_track(vcpu, error_code, gfn))
+		return 1;
 
 	r = mmu_topup_memory_caches(vcpu);
 	if (r)
@@ -3425,7 +3468,6 @@ static int nonpaging_page_fault(struct kvm_vcpu *vcpu, gva_t gva,
 
 	MMU_WARN_ON(!VALID_PAGE(vcpu->arch.mmu.root_hpa));
 
-	gfn = gva >> PAGE_SHIFT;
 
 	return nonpaging_map(vcpu, gva & PAGE_MASK,
 			     error_code, gfn, prefault);
@@ -3453,7 +3495,7 @@ static bool can_do_async_pf(struct kvm_vcpu *vcpu)
 }
 
 static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
-			 gva_t gva, pfn_t *pfn, bool write, bool *writable)
+			 gva_t gva, kvm_pfn_t *pfn, bool write, bool *writable)
 {
 	struct kvm_memory_slot *slot;
 	bool async;
@@ -3491,7 +3533,7 @@ check_hugepage_cache_consistency(struct kvm_vcpu *vcpu, gfn_t gfn, int level)
 static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, u32 error_code,
 			  bool prefault)
 {
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	int r;
 	int level;
 	bool force_pt_level;
@@ -3502,12 +3544,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, u32 error_code,
 
 	MMU_WARN_ON(!VALID_PAGE(vcpu->arch.mmu.root_hpa));
 
-	if (unlikely(error_code & PFERR_RSVD_MASK)) {
-		r = handle_mmio_page_fault(vcpu, gpa, error_code, true);
-
-		if (likely(r != RET_MMIO_PF_INVALID))
-			return r;
-	}
+	if (page_fault_handle_page_track(vcpu, error_code, gfn))
+		return 1;
 
 	r = mmu_topup_memory_caches(vcpu);
 	if (r)
@@ -3541,8 +3579,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, u32 error_code,
 	make_mmu_pages_available(vcpu);
 	if (likely(!force_pt_level))
 		transparent_hugepage_adjust(vcpu, &gfn, &pfn, &level);
-	r = __direct_map(vcpu, gpa, write, map_writable,
-			 level, gfn, pfn, prefault);
+	r = __direct_map(vcpu, write, map_writable, level, gfn, pfn, prefault);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
@@ -3601,13 +3638,24 @@ static bool sync_mmio_spte(struct kvm_vcpu *vcpu, u64 *sptep, gfn_t gfn,
 	return false;
 }
 
-static inline bool is_last_gpte(struct kvm_mmu *mmu, unsigned level, unsigned gpte)
+static inline bool is_last_gpte(struct kvm_mmu *mmu,
+				unsigned level, unsigned gpte)
 {
-	unsigned index;
+	/*
+	 * PT_PAGE_TABLE_LEVEL always terminates.  The RHS has bit 7 set
+	 * iff level <= PT_PAGE_TABLE_LEVEL, which for our purpose means
+	 * level == PT_PAGE_TABLE_LEVEL; set PT_PAGE_SIZE_MASK in gpte then.
+	 */
+	gpte |= level - PT_PAGE_TABLE_LEVEL - 1;
 
-	index = level - 1;
-	index |= (gpte & PT_PAGE_SIZE_MASK) >> (PT_PAGE_SIZE_SHIFT - 2);
-	return mmu->last_pte_bitmap & (1 << index);
+	/*
+	 * The RHS has bit 7 set iff level < mmu->last_nonleaf_level.
+	 * If it is clear, there are no large pages at this level, so clear
+	 * PT_PAGE_SIZE_MASK in gpte if that is the case.
+	 */
+	gpte &= level - mmu->last_nonleaf_level;
+
+	return gpte & PT_PAGE_SIZE_MASK;
 }
 
 #define PTTYPE_EPT 18 /* arbitrary */
@@ -3764,13 +3812,15 @@ static void reset_rsvds_bits_mask_ept(struct kvm_vcpu *vcpu,
 void
 reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context)
 {
+	bool uses_nx = context->nx || context->base_role.smep_andnot_wp;
+
 	/*
 	 * Passing "true" to the last argument is okay; it adds a check
 	 * on bit 8 of the SPTEs which KVM doesn't use anyway.
 	 */
 	__reset_rsvds_bits_mask(vcpu, &context->shadow_zero_check,
 				boot_cpu_data.x86_phys_bits,
-				context->shadow_root_level, context->nx,
+				context->shadow_root_level, uses_nx,
 				guest_cpuid_has_gbpages(vcpu), is_pse(vcpu),
 				true);
 }
@@ -3879,22 +3929,88 @@ static void update_permission_bitmask(struct kvm_vcpu *vcpu,
 	}
 }
 
-static void update_last_pte_bitmap(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
-{
-	u8 map;
-	unsigned level, root_level = mmu->root_level;
-	const unsigned ps_set_index = 1 << 2;  /* bit 2 of index: ps */
-
-	if (root_level == PT32E_ROOT_LEVEL)
-		--root_level;
-	/* PT_PAGE_TABLE_LEVEL always terminates */
-	map = 1 | (1 << ps_set_index);
-	for (level = PT_DIRECTORY_LEVEL; level <= root_level; ++level) {
-		if (level <= PT_PDPE_LEVEL
-		    && (mmu->root_level >= PT32E_ROOT_LEVEL || is_pse(vcpu)))
-			map |= 1 << (ps_set_index | (level - 1));
+/*
+* PKU is an additional mechanism by which the paging controls access to
+* user-mode addresses based on the value in the PKRU register.  Protection
+* key violations are reported through a bit in the page fault error code.
+* Unlike other bits of the error code, the PK bit is not known at the
+* call site of e.g. gva_to_gpa; it must be computed directly in
+* permission_fault based on two bits of PKRU, on some machine state (CR4,
+* CR0, EFER, CPL), and on other bits of the error code and the page tables.
+*
+* In particular the following conditions come from the error code, the
+* page tables and the machine state:
+* - PK is always zero unless CR4.PKE=1 and EFER.LMA=1
+* - PK is always zero if RSVD=1 (reserved bit set) or F=1 (instruction fetch)
+* - PK is always zero if U=0 in the page tables
+* - PKRU.WD is ignored if CR0.WP=0 and the access is a supervisor access.
+*
+* The PKRU bitmask caches the result of these four conditions.  The error
+* code (minus the P bit) and the page table's U bit form an index into the
+* PKRU bitmask.  Two bits of the PKRU bitmask are then extracted and ANDed
+* with the two bits of the PKRU register corresponding to the protection key.
+* For the first three conditions above the bits will be 00, thus masking
+* away both AD and WD.  For all reads or if the last condition holds, WD
+* only will be masked away.
+*/
+static void update_pkru_bitmask(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
+				bool ept)
+{
+	unsigned bit;
+	bool wp;
+
+	if (ept) {
+		mmu->pkru_mask = 0;
+		return;
+	}
+
+	/* PKEY is enabled only if CR4.PKE and EFER.LMA are both set. */
+	if (!kvm_read_cr4_bits(vcpu, X86_CR4_PKE) || !is_long_mode(vcpu)) {
+		mmu->pkru_mask = 0;
+		return;
 	}
-	mmu->last_pte_bitmap = map;
+
+	wp = is_write_protection(vcpu);
+
+	for (bit = 0; bit < ARRAY_SIZE(mmu->permissions); ++bit) {
+		unsigned pfec, pkey_bits;
+		bool check_pkey, check_write, ff, uf, wf, pte_user;
+
+		pfec = bit << 1;
+		ff = pfec & PFERR_FETCH_MASK;
+		uf = pfec & PFERR_USER_MASK;
+		wf = pfec & PFERR_WRITE_MASK;
+
+		/* PFEC.RSVD is replaced by ACC_USER_MASK. */
+		pte_user = pfec & PFERR_RSVD_MASK;
+
+		/*
+		 * Only need to check the access which is not an
+		 * instruction fetch and is to a user page.
+		 */
+		check_pkey = (!ff && pte_user);
+		/*
+		 * write access is controlled by PKRU if it is a
+		 * user access or CR0.WP = 1.
+		 */
+		check_write = check_pkey && wf && (uf || wp);
+
+		/* PKRU.AD stops both read and write access. */
+		pkey_bits = !!check_pkey;
+		/* PKRU.WD stops write access. */
+		pkey_bits |= (!!check_write) << 1;
+
+		mmu->pkru_mask |= (pkey_bits & 3) << pfec;
+	}
+}
+
+static void update_last_nonleaf_level(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
+{
+	unsigned root_level = mmu->root_level;
+
+	mmu->last_nonleaf_level = root_level;
+	if (root_level == PT32_ROOT_LEVEL && is_pse(vcpu))
+		mmu->last_nonleaf_level++;
 }
 
 static void paging64_init_context_common(struct kvm_vcpu *vcpu,
@@ -3906,7 +4022,8 @@ static void paging64_init_context_common(struct kvm_vcpu *vcpu,
 
 	reset_rsvds_bits_mask(vcpu, context);
 	update_permission_bitmask(vcpu, context, false);
-	update_last_pte_bitmap(vcpu, context);
+	update_pkru_bitmask(vcpu, context, false);
+	update_last_nonleaf_level(vcpu, context);
 
 	MMU_WARN_ON(!is_pae(vcpu));
 	context->page_fault = paging64_page_fault;
@@ -3933,7 +4050,8 @@ static void paging32_init_context(struct kvm_vcpu *vcpu,
 
 	reset_rsvds_bits_mask(vcpu, context);
 	update_permission_bitmask(vcpu, context, false);
-	update_last_pte_bitmap(vcpu, context);
+	update_pkru_bitmask(vcpu, context, false);
+	update_last_nonleaf_level(vcpu, context);
 
 	context->page_fault = paging32_page_fault;
 	context->gva_to_gpa = paging32_gva_to_gpa;
@@ -3991,7 +4109,8 @@ static void init_kvm_tdp_mmu(struct kvm_vcpu *vcpu)
 	}
 
 	update_permission_bitmask(vcpu, context, false);
-	update_last_pte_bitmap(vcpu, context);
+	update_pkru_bitmask(vcpu, context, false);
+	update_last_nonleaf_level(vcpu, context);
 	reset_tdp_shadow_zero_bits_mask(vcpu, context);
 }
 
@@ -4043,6 +4162,7 @@ void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly)
 	context->direct_map = false;
 
 	update_permission_bitmask(vcpu, context, true);
+	update_pkru_bitmask(vcpu, context, true);
 	reset_rsvds_bits_mask_ept(vcpu, context, execonly);
 	reset_ept_shadow_zero_bits_mask(vcpu, context, execonly);
 }
@@ -4068,10 +4188,12 @@ static void init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
 	g_context->inject_page_fault = kvm_inject_page_fault;
 
 	/*
-	 * Note that arch.mmu.gva_to_gpa translates l2_gva to l1_gpa. The
-	 * translation of l2_gpa to l1_gpa addresses is done using the
-	 * arch.nested_mmu.gva_to_gpa function. Basically the gva_to_gpa
-	 * functions between mmu and nested_mmu are swapped.
+	 * Note that arch.mmu.gva_to_gpa translates l2_gpa to l1_gpa using
+	 * L1's nested page tables (e.g. EPT12). The nested translation
+	 * of l2_gva to l1_gpa is done by arch.nested_mmu.gva_to_gpa using
+	 * L2's page tables as the first level of translation and L1's
+	 * nested page tables as the second level of translation. Basically
+	 * the gva_to_gpa functions between mmu and nested_mmu are swapped.
 	 */
 	if (!is_paging(vcpu)) {
 		g_context->nx = false;
@@ -4095,7 +4217,8 @@ static void init_kvm_nested_mmu(struct kvm_vcpu *vcpu)
 	}
 
 	update_permission_bitmask(vcpu, g_context, false);
-	update_last_pte_bitmap(vcpu, g_context);
+	update_pkru_bitmask(vcpu, g_context, false);
+	update_last_nonleaf_level(vcpu, g_context);
 }
 
 static void init_kvm_mmu(struct kvm_vcpu *vcpu)
@@ -4166,18 +4289,6 @@ static bool need_remote_flush(u64 old, u64 new)
 	return (old & ~new & PT64_PERM_MASK) != 0;
 }
 
-static void mmu_pte_write_flush_tlb(struct kvm_vcpu *vcpu, bool zap_page,
-				    bool remote_flush, bool local_flush)
-{
-	if (zap_page)
-		return;
-
-	if (remote_flush)
-		kvm_flush_remote_tlbs(vcpu->kvm);
-	else if (local_flush)
-		kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu);
-}
-
 static u64 mmu_pte_write_fetch_gpte(struct kvm_vcpu *vcpu, gpa_t *gpa,
 				    const u8 *new, int *bytes)
 {
@@ -4227,7 +4338,8 @@ static bool detect_write_flooding(struct kvm_mmu_page *sp)
 	if (sp->role.level == PT_PAGE_TABLE_LEVEL)
 		return false;
 
-	return ++sp->write_flooding_count >= 3;
+	atomic_inc(&sp->write_flooding_count);
+	return atomic_read(&sp->write_flooding_count) >= 3;
 }
 
 /*
@@ -4289,15 +4401,15 @@ static u64 *get_written_sptes(struct kvm_mmu_page *sp, gpa_t gpa, int *nspte)
 	return spte;
 }
 
-void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
-		       const u8 *new, int bytes)
+static void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
+			      const u8 *new, int bytes)
 {
 	gfn_t gfn = gpa >> PAGE_SHIFT;
 	struct kvm_mmu_page *sp;
 	LIST_HEAD(invalid_list);
 	u64 entry, gentry, *spte;
 	int npte;
-	bool remote_flush, local_flush, zap_page;
+	bool remote_flush, local_flush;
 	union kvm_mmu_page_role mask = { };
 
 	mask.cr0_wp = 1;
@@ -4314,7 +4426,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	if (!ACCESS_ONCE(vcpu->kvm->arch.indirect_shadow_pages))
 		return;
 
-	zap_page = remote_flush = local_flush = false;
+	remote_flush = local_flush = false;
 
 	pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
 
@@ -4334,8 +4446,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	for_each_gfn_indirect_valid_sp(vcpu->kvm, sp, gfn) {
 		if (detect_write_misaligned(sp, gpa, bytes) ||
 		      detect_write_flooding(sp)) {
-			zap_page |= !!kvm_mmu_prepare_zap_page(vcpu->kvm, sp,
-						     &invalid_list);
+			kvm_mmu_prepare_zap_page(vcpu->kvm, sp, &invalid_list);
 			++vcpu->kvm->stat.mmu_flooded;
 			continue;
 		}
@@ -4357,8 +4468,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 			++spte;
 		}
 	}
-	mmu_pte_write_flush_tlb(vcpu, zap_page, remote_flush, local_flush);
-	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
+	kvm_mmu_flush_or_zap(vcpu, &invalid_list, remote_flush, local_flush);
 	kvm_mmu_audit(vcpu, AUDIT_POST_PTE_WRITE);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 }
@@ -4395,32 +4505,34 @@ static void make_mmu_pages_available(struct kvm_vcpu *vcpu)
 	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
 }
 
-static bool is_mmio_page_fault(struct kvm_vcpu *vcpu, gva_t addr)
-{
-	if (vcpu->arch.mmu.direct_map || mmu_is_nested(vcpu))
-		return vcpu_match_mmio_gpa(vcpu, addr);
-
-	return vcpu_match_mmio_gva(vcpu, addr);
-}
-
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code,
 		       void *insn, int insn_len)
 {
 	int r, emulation_type = EMULTYPE_RETRY;
 	enum emulation_result er;
+	bool direct = vcpu->arch.mmu.direct_map || mmu_is_nested(vcpu);
+
+	if (unlikely(error_code & PFERR_RSVD_MASK)) {
+		r = handle_mmio_page_fault(vcpu, cr2, direct);
+		if (r == RET_MMIO_PF_EMULATE) {
+			emulation_type = 0;
+			goto emulate;
+		}
+		if (r == RET_MMIO_PF_RETRY)
+			return 1;
+		if (r < 0)
+			return r;
+	}
 
 	r = vcpu->arch.mmu.page_fault(vcpu, cr2, error_code, false);
 	if (r < 0)
-		goto out;
-
-	if (!r) {
-		r = 1;
-		goto out;
-	}
+		return r;
+	if (!r)
+		return 1;
 
-	if (is_mmio_page_fault(vcpu, cr2))
+	if (mmio_info_in_cache(vcpu, cr2, direct))
 		emulation_type = 0;
-
+emulate:
 	er = x86_emulate_instruction(vcpu, cr2, emulation_type, insn, insn_len);
 
 	switch (er) {
@@ -4434,8 +4546,6 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code,
 	default:
 		BUG();
 	}
-out:
-	return r;
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_page_fault);
 
@@ -4504,8 +4614,23 @@ void kvm_mmu_setup(struct kvm_vcpu *vcpu)
 	init_kvm_mmu(vcpu);
 }
 
+void kvm_mmu_init_vm(struct kvm *kvm)
+{
+	struct kvm_page_track_notifier_node *node = &kvm->arch.mmu_sp_tracker;
+
+	node->track_write = kvm_mmu_pte_write;
+	kvm_page_track_register_notifier(kvm, node);
+}
+
+void kvm_mmu_uninit_vm(struct kvm *kvm)
+{
+	struct kvm_page_track_notifier_node *node = &kvm->arch.mmu_sp_tracker;
+
+	kvm_page_track_unregister_notifier(kvm, node);
+}
+
 /* The return value indicates if tlb flush on all vcpus is needed. */
-typedef bool (*slot_level_handler) (struct kvm *kvm, unsigned long *rmap);
+typedef bool (*slot_level_handler) (struct kvm *kvm, struct kvm_rmap_head *rmap_head);
 
 /* The caller should hold mmu-lock before calling this function. */
 static bool
@@ -4599,9 +4724,10 @@ void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
 	spin_unlock(&kvm->mmu_lock);
 }
 
-static bool slot_rmap_write_protect(struct kvm *kvm, unsigned long *rmapp)
+static bool slot_rmap_write_protect(struct kvm *kvm,
+				    struct kvm_rmap_head *rmap_head)
 {
-	return __rmap_write_protect(kvm, rmapp, false);
+	return __rmap_write_protect(kvm, rmap_head, false);
 }
 
 void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
@@ -4637,16 +4763,16 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
 }
 
 static bool kvm_mmu_zap_collapsible_spte(struct kvm *kvm,
-		unsigned long *rmapp)
+					 struct kvm_rmap_head *rmap_head)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
 	int need_tlb_flush = 0;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	struct kvm_mmu_page *sp;
 
 restart:
-	for_each_rmap_spte(rmapp, &iter, sptep) {
+	for_each_rmap_spte(rmap_head, &iter, sptep) {
 		sp = page_header(__pa(sptep));
 		pfn = spte_to_pfn(*sptep);
 
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index e4202e41d535..66b33b96a31b 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -10,10 +10,11 @@
 #define PT32_ENT_PER_PAGE (1 << PT32_PT_BITS)
 
 #define PT_WRITABLE_SHIFT 1
+#define PT_USER_SHIFT 2
 
 #define PT_PRESENT_MASK (1ULL << 0)
 #define PT_WRITABLE_MASK (1ULL << PT_WRITABLE_SHIFT)
-#define PT_USER_MASK (1ULL << 2)
+#define PT_USER_MASK (1ULL << PT_USER_SHIFT)
 #define PT_PWT_MASK (1ULL << 3)
 #define PT_PCD_MASK (1ULL << 4)
 #define PT_ACCESSED_SHIFT 5
@@ -56,13 +57,13 @@ void
 reset_shadow_zero_bits_mask(struct kvm_vcpu *vcpu, struct kvm_mmu *context);
 
 /*
- * Return values of handle_mmio_page_fault_common:
+ * Return values of handle_mmio_page_fault:
  * RET_MMIO_PF_EMULATE: it is a real mmio page fault, emulate the instruction
  *			directly.
  * RET_MMIO_PF_INVALID: invalid spte is detected then let the real page
  *			fault path update the mmio spte.
  * RET_MMIO_PF_RETRY: let CPU fault again on the address.
- * RET_MMIO_PF_BUG: bug is detected.
+ * RET_MMIO_PF_BUG: a bug was detected (and a WARN was printed).
  */
 enum {
 	RET_MMIO_PF_EMULATE = 1,
@@ -71,7 +72,7 @@ enum {
 	RET_MMIO_PF_BUG = -1
 };
 
-int handle_mmio_page_fault_common(struct kvm_vcpu *vcpu, u64 addr, bool direct);
+int handle_mmio_page_fault(struct kvm_vcpu *vcpu, u64 addr, bool direct);
 void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu);
 void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly);
 
@@ -141,11 +142,16 @@ static inline bool is_write_protection(struct kvm_vcpu *vcpu)
 }
 
 /*
- * Will a fault with a given page-fault error code (pfec) cause a permission
- * fault with the given access (in ACC_* format)?
+ * Check if a given access (described through the I/D, W/R and U/S bits of a
+ * page fault error code pfec) causes a permission fault with the given PTE
+ * access rights (in ACC_* format).
+ *
+ * Return zero if the access does not fault; return the page fault error code
+ * if the access faults.
  */
-static inline bool permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
-				    unsigned pte_access, unsigned pfec)
+static inline u8 permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
+				  unsigned pte_access, unsigned pte_pkey,
+				  unsigned pfec)
 {
 	int cpl = kvm_x86_ops->get_cpl(vcpu);
 	unsigned long rflags = kvm_x86_ops->get_rflags(vcpu);
@@ -166,12 +172,38 @@ static inline bool permission_fault(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 	unsigned long smap = (cpl - 3) & (rflags & X86_EFLAGS_AC);
 	int index = (pfec >> 1) +
 		    (smap >> (X86_EFLAGS_AC_BIT - PFERR_RSVD_BIT + 1));
-
-	WARN_ON(pfec & PFERR_RSVD_MASK);
-
-	return (mmu->permissions[index] >> pte_access) & 1;
+	bool fault = (mmu->permissions[index] >> pte_access) & 1;
+	u32 errcode = PFERR_PRESENT_MASK;
+
+	WARN_ON(pfec & (PFERR_PK_MASK | PFERR_RSVD_MASK));
+	if (unlikely(mmu->pkru_mask)) {
+		u32 pkru_bits, offset;
+
+		/*
+		* PKRU defines 32 bits, there are 16 domains and 2
+		* attribute bits per domain in pkru.  pte_pkey is the
+		* index of the protection domain, so pte_pkey * 2 is
+		* is the index of the first bit for the domain.
+		*/
+		pkru_bits = (kvm_read_pkru(vcpu) >> (pte_pkey * 2)) & 3;
+
+		/* clear present bit, replace PFEC.RSVD with ACC_USER_MASK. */
+		offset = (pfec & ~1) +
+			((pte_access & PT_USER_MASK) << (PFERR_RSVD_BIT - PT_USER_SHIFT));
+
+		pkru_bits &= mmu->pkru_mask >> offset;
+		errcode |= -pkru_bits & PFERR_PK_MASK;
+		fault |= (pkru_bits != 0);
+	}
+
+	return -(u32)fault & errcode;
 }
 
 void kvm_mmu_invalidate_zap_all_pages(struct kvm *kvm);
 void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end);
+
+void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn);
+void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn);
+bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm,
+				    struct kvm_memory_slot *slot, u64 gfn);
 #endif
diff --git a/arch/x86/kvm/mmu_audit.c b/arch/x86/kvm/mmu_audit.c
index 03d518e499a6..dcce533d420c 100644
--- a/arch/x86/kvm/mmu_audit.c
+++ b/arch/x86/kvm/mmu_audit.c
@@ -97,7 +97,7 @@ static void audit_mappings(struct kvm_vcpu *vcpu, u64 *sptep, int level)
 {
 	struct kvm_mmu_page *sp;
 	gfn_t gfn;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	hpa_t hpa;
 
 	sp = page_header(__pa(sptep));
@@ -129,7 +129,7 @@ static void audit_mappings(struct kvm_vcpu *vcpu, u64 *sptep, int level)
 static void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
 {
 	static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10);
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 	struct kvm_mmu_page *rev_sp;
 	struct kvm_memslots *slots;
 	struct kvm_memory_slot *slot;
@@ -150,8 +150,8 @@ static void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
 		return;
 	}
 
-	rmapp = __gfn_to_rmap(gfn, rev_sp->role.level, slot);
-	if (!*rmapp) {
+	rmap_head = __gfn_to_rmap(gfn, rev_sp->role.level, slot);
+	if (!rmap_head->val) {
 		if (!__ratelimit(&ratelimit_state))
 			return;
 		audit_printk(kvm, "no rmap for writable spte %llx\n",
@@ -183,7 +183,7 @@ static void check_mappings_rmap(struct kvm *kvm, struct kvm_mmu_page *sp)
 		return;
 
 	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
-		if (!is_rmap_spte(sp->spt[i]))
+		if (!is_shadow_present_pte(sp->spt[i]))
 			continue;
 
 		inspect_spte_has_rmap(kvm, sp->spt + i);
@@ -192,7 +192,7 @@ static void check_mappings_rmap(struct kvm *kvm, struct kvm_mmu_page *sp)
 
 static void audit_write_protection(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
-	unsigned long *rmapp;
+	struct kvm_rmap_head *rmap_head;
 	u64 *sptep;
 	struct rmap_iterator iter;
 	struct kvm_memslots *slots;
@@ -203,13 +203,14 @@ static void audit_write_protection(struct kvm *kvm, struct kvm_mmu_page *sp)
 
 	slots = kvm_memslots_for_spte_role(kvm, sp->role);
 	slot = __gfn_to_memslot(slots, sp->gfn);
-	rmapp = __gfn_to_rmap(sp->gfn, PT_PAGE_TABLE_LEVEL, slot);
+	rmap_head = __gfn_to_rmap(sp->gfn, PT_PAGE_TABLE_LEVEL, slot);
 
-	for_each_rmap_spte(rmapp, &iter, sptep)
+	for_each_rmap_spte(rmap_head, &iter, sptep) {
 		if (is_writable_pte(*sptep))
 			audit_printk(kvm, "shadow page has writable "
 				     "mappings: gfn %llx role %x\n",
 				     sp->gfn, sp->role.word);
+	}
 }
 
 static void audit_sp(struct kvm *kvm, struct kvm_mmu_page *sp)
diff --git a/arch/x86/kvm/mtrr.c b/arch/x86/kvm/mtrr.c
index 9e8bf13572e6..3f8c732117ec 100644
--- a/arch/x86/kvm/mtrr.c
+++ b/arch/x86/kvm/mtrr.c
@@ -120,14 +120,22 @@ static u8 mtrr_default_type(struct kvm_mtrr *mtrr_state)
 	return mtrr_state->deftype & IA32_MTRR_DEF_TYPE_TYPE_MASK;
 }
 
-static u8 mtrr_disabled_type(void)
+static u8 mtrr_disabled_type(struct kvm_vcpu *vcpu)
 {
 	/*
 	 * Intel SDM 11.11.2.2: all MTRRs are disabled when
 	 * IA32_MTRR_DEF_TYPE.E bit is cleared, and the UC
 	 * memory type is applied to all of physical memory.
+	 *
+	 * However, virtual machines can be run with CPUID such that
+	 * there are no MTRRs.  In that case, the firmware will never
+	 * enable MTRRs and it is obviously undesirable to run the
+	 * guest entirely with UC memory and we use WB.
 	 */
-	return MTRR_TYPE_UNCACHABLE;
+	if (guest_cpuid_has_mtrr(vcpu))
+		return MTRR_TYPE_UNCACHABLE;
+	else
+		return MTRR_TYPE_WRBACK;
 }
 
 /*
@@ -267,7 +275,7 @@ static int fixed_mtrr_addr_to_seg(u64 addr)
 
 	for (seg = 0; seg < seg_num; seg++) {
 		mtrr_seg = &fixed_seg_table[seg];
-		if (mtrr_seg->start >= addr && addr < mtrr_seg->end)
+		if (mtrr_seg->start <= addr && addr < mtrr_seg->end)
 			return seg;
 	}
 
@@ -300,7 +308,6 @@ static void var_mtrr_range(struct kvm_mtrr_range *range, u64 *start, u64 *end)
 	*start = range->base & PAGE_MASK;
 
 	mask = range->mask & PAGE_MASK;
-	mask |= ~0ULL << boot_cpu_data.x86_phys_bits;
 
 	/* This cannot overflow because writing to the reserved bits of
 	 * variable MTRRs causes a #GP.
@@ -356,10 +363,14 @@ static void set_var_mtrr_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	if (var_mtrr_range_is_valid(cur))
 		list_del(&mtrr_state->var_ranges[index].node);
 
+	/* Extend the mask with all 1 bits to the left, since those
+	 * bits must implicitly be 0.  The bits are then cleared
+	 * when reading them.
+	 */
 	if (!is_mtrr_mask)
 		cur->base = data;
 	else
-		cur->mask = data;
+		cur->mask = data | (-1LL << cpuid_maxphyaddr(vcpu));
 
 	/* add it to the list if it's enabled. */
 	if (var_mtrr_range_is_valid(cur)) {
@@ -426,6 +437,8 @@ int kvm_mtrr_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 			*pdata = vcpu->arch.mtrr_state.var_ranges[index].base;
 		else
 			*pdata = vcpu->arch.mtrr_state.var_ranges[index].mask;
+
+		*pdata &= (1ULL << cpuid_maxphyaddr(vcpu)) - 1;
 	}
 
 	return 0;
@@ -670,7 +683,7 @@ u8 kvm_mtrr_get_guest_memory_type(struct kvm_vcpu *vcpu, gfn_t gfn)
 	}
 
 	if (iter.mtrr_disabled)
-		return mtrr_disabled_type();
+		return mtrr_disabled_type(vcpu);
 
 	/* not contained in any MTRRs. */
 	if (type == -1)
diff --git a/arch/x86/kvm/page_track.c b/arch/x86/kvm/page_track.c
new file mode 100644
index 000000000000..b431539c3714
--- /dev/null
+++ b/arch/x86/kvm/page_track.c
@@ -0,0 +1,227 @@
+/*
+ * Support KVM gust page tracking
+ *
+ * This feature allows us to track page access in guest. Currently, only
+ * write access is tracked.
+ *
+ * Copyright(C) 2015 Intel Corporation.
+ *
+ * Author:
+ *   Xiao Guangrong <guangrong.xiao@linux.intel.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/kvm_host.h>
+#include <asm/kvm_page_track.h>
+
+#include "mmu.h"
+
+void kvm_page_track_free_memslot(struct kvm_memory_slot *free,
+				 struct kvm_memory_slot *dont)
+{
+	int i;
+
+	for (i = 0; i < KVM_PAGE_TRACK_MAX; i++)
+		if (!dont || free->arch.gfn_track[i] !=
+		      dont->arch.gfn_track[i]) {
+			kvfree(free->arch.gfn_track[i]);
+			free->arch.gfn_track[i] = NULL;
+		}
+}
+
+int kvm_page_track_create_memslot(struct kvm_memory_slot *slot,
+				  unsigned long npages)
+{
+	int  i;
+
+	for (i = 0; i < KVM_PAGE_TRACK_MAX; i++) {
+		slot->arch.gfn_track[i] = kvm_kvzalloc(npages *
+					    sizeof(*slot->arch.gfn_track[i]));
+		if (!slot->arch.gfn_track[i])
+			goto track_free;
+	}
+
+	return 0;
+
+track_free:
+	kvm_page_track_free_memslot(slot, NULL);
+	return -ENOMEM;
+}
+
+static inline bool page_track_mode_is_valid(enum kvm_page_track_mode mode)
+{
+	if (mode < 0 || mode >= KVM_PAGE_TRACK_MAX)
+		return false;
+
+	return true;
+}
+
+static void update_gfn_track(struct kvm_memory_slot *slot, gfn_t gfn,
+			     enum kvm_page_track_mode mode, short count)
+{
+	int index, val;
+
+	index = gfn_to_index(gfn, slot->base_gfn, PT_PAGE_TABLE_LEVEL);
+
+	val = slot->arch.gfn_track[mode][index];
+
+	if (WARN_ON(val + count < 0 || val + count > USHRT_MAX))
+		return;
+
+	slot->arch.gfn_track[mode][index] += count;
+}
+
+/*
+ * add guest page to the tracking pool so that corresponding access on that
+ * page will be intercepted.
+ *
+ * It should be called under the protection both of mmu-lock and kvm->srcu
+ * or kvm->slots_lock.
+ *
+ * @kvm: the guest instance we are interested in.
+ * @slot: the @gfn belongs to.
+ * @gfn: the guest page.
+ * @mode: tracking mode, currently only write track is supported.
+ */
+void kvm_slot_page_track_add_page(struct kvm *kvm,
+				  struct kvm_memory_slot *slot, gfn_t gfn,
+				  enum kvm_page_track_mode mode)
+{
+
+	if (WARN_ON(!page_track_mode_is_valid(mode)))
+		return;
+
+	update_gfn_track(slot, gfn, mode, 1);
+
+	/*
+	 * new track stops large page mapping for the
+	 * tracked page.
+	 */
+	kvm_mmu_gfn_disallow_lpage(slot, gfn);
+
+	if (mode == KVM_PAGE_TRACK_WRITE)
+		if (kvm_mmu_slot_gfn_write_protect(kvm, slot, gfn))
+			kvm_flush_remote_tlbs(kvm);
+}
+
+/*
+ * remove the guest page from the tracking pool which stops the interception
+ * of corresponding access on that page. It is the opposed operation of
+ * kvm_slot_page_track_add_page().
+ *
+ * It should be called under the protection both of mmu-lock and kvm->srcu
+ * or kvm->slots_lock.
+ *
+ * @kvm: the guest instance we are interested in.
+ * @slot: the @gfn belongs to.
+ * @gfn: the guest page.
+ * @mode: tracking mode, currently only write track is supported.
+ */
+void kvm_slot_page_track_remove_page(struct kvm *kvm,
+				     struct kvm_memory_slot *slot, gfn_t gfn,
+				     enum kvm_page_track_mode mode)
+{
+	if (WARN_ON(!page_track_mode_is_valid(mode)))
+		return;
+
+	update_gfn_track(slot, gfn, mode, -1);
+
+	/*
+	 * allow large page mapping for the tracked page
+	 * after the tracker is gone.
+	 */
+	kvm_mmu_gfn_allow_lpage(slot, gfn);
+}
+
+/*
+ * check if the corresponding access on the specified guest page is tracked.
+ */
+bool kvm_page_track_is_active(struct kvm_vcpu *vcpu, gfn_t gfn,
+			      enum kvm_page_track_mode mode)
+{
+	struct kvm_memory_slot *slot;
+	int index;
+
+	if (WARN_ON(!page_track_mode_is_valid(mode)))
+		return false;
+
+	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
+	if (!slot)
+		return false;
+
+	index = gfn_to_index(gfn, slot->base_gfn, PT_PAGE_TABLE_LEVEL);
+	return !!ACCESS_ONCE(slot->arch.gfn_track[mode][index]);
+}
+
+void kvm_page_track_init(struct kvm *kvm)
+{
+	struct kvm_page_track_notifier_head *head;
+
+	head = &kvm->arch.track_notifier_head;
+	init_srcu_struct(&head->track_srcu);
+	INIT_HLIST_HEAD(&head->track_notifier_list);
+}
+
+/*
+ * register the notifier so that event interception for the tracked guest
+ * pages can be received.
+ */
+void
+kvm_page_track_register_notifier(struct kvm *kvm,
+				 struct kvm_page_track_notifier_node *n)
+{
+	struct kvm_page_track_notifier_head *head;
+
+	head = &kvm->arch.track_notifier_head;
+
+	spin_lock(&kvm->mmu_lock);
+	hlist_add_head_rcu(&n->node, &head->track_notifier_list);
+	spin_unlock(&kvm->mmu_lock);
+}
+
+/*
+ * stop receiving the event interception. It is the opposed operation of
+ * kvm_page_track_register_notifier().
+ */
+void
+kvm_page_track_unregister_notifier(struct kvm *kvm,
+				   struct kvm_page_track_notifier_node *n)
+{
+	struct kvm_page_track_notifier_head *head;
+
+	head = &kvm->arch.track_notifier_head;
+
+	spin_lock(&kvm->mmu_lock);
+	hlist_del_rcu(&n->node);
+	spin_unlock(&kvm->mmu_lock);
+	synchronize_srcu(&head->track_srcu);
+}
+
+/*
+ * Notify the node that write access is intercepted and write emulation is
+ * finished at this time.
+ *
+ * The node should figure out if the written page is the one that node is
+ * interested in by itself.
+ */
+void kvm_page_track_write(struct kvm_vcpu *vcpu, gpa_t gpa, const u8 *new,
+			  int bytes)
+{
+	struct kvm_page_track_notifier_head *head;
+	struct kvm_page_track_notifier_node *n;
+	int idx;
+
+	head = &vcpu->kvm->arch.track_notifier_head;
+
+	if (hlist_empty(&head->track_notifier_list))
+		return;
+
+	idx = srcu_read_lock(&head->track_srcu);
+	hlist_for_each_entry_rcu(n, &head->track_notifier_list, node)
+		if (n->track_write)
+			n->track_write(vcpu, gpa, new, bytes);
+	srcu_read_unlock(&head->track_srcu, idx);
+}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index b41faa91a6f9..bc019f70e0b6 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -189,8 +189,11 @@ static inline unsigned FNAME(gpte_access)(struct kvm_vcpu *vcpu, u64 gpte)
 		((gpte & VMX_EPT_EXECUTABLE_MASK) ? ACC_EXEC_MASK : 0) |
 		ACC_USER_MASK;
 #else
-	access = (gpte & (PT_WRITABLE_MASK | PT_USER_MASK)) | ACC_EXEC_MASK;
-	access &= ~(gpte >> PT64_NX_SHIFT);
+	BUILD_BUG_ON(ACC_EXEC_MASK != PT_PRESENT_MASK);
+	BUILD_BUG_ON(ACC_EXEC_MASK != 1);
+	access = gpte & (PT_WRITABLE_MASK | PT_USER_MASK | PT_PRESENT_MASK);
+	/* Combine NX with P (which is set here) to get ACC_EXEC_MASK.  */
+	access ^= (gpte >> PT64_NX_SHIFT);
 #endif
 
 	return access;
@@ -249,11 +252,22 @@ static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu,
 			return ret;
 
 		kvm_vcpu_mark_page_dirty(vcpu, table_gfn);
-		walker->ptes[level] = pte;
+		walker->ptes[level - 1] = pte;
 	}
 	return 0;
 }
 
+static inline unsigned FNAME(gpte_pkeys)(struct kvm_vcpu *vcpu, u64 gpte)
+{
+	unsigned pkeys = 0;
+#if PTTYPE == 64
+	pte_t pte = {.pte = gpte};
+
+	pkeys = pte_flags_pkey(pte_flags(pte));
+#endif
+	return pkeys;
+}
+
 /*
  * Fetch a guest pte for a guest virtual address
  */
@@ -265,7 +279,7 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker,
 	pt_element_t pte;
 	pt_element_t __user *uninitialized_var(ptep_user);
 	gfn_t table_gfn;
-	unsigned index, pt_access, pte_access, accessed_dirty;
+	unsigned index, pt_access, pte_access, accessed_dirty, pte_pkey;
 	gpa_t pte_gpa;
 	int offset;
 	const int write_fault = access & PFERR_WRITE_MASK;
@@ -346,7 +360,7 @@ retry_walk:
 			goto error;
 
 		if (unlikely(is_rsvd_bits_set(mmu, pte, walker->level))) {
-			errcode |= PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
+			errcode = PFERR_RSVD_MASK | PFERR_PRESENT_MASK;
 			goto error;
 		}
 
@@ -356,10 +370,10 @@ retry_walk:
 		walker->ptes[walker->level - 1] = pte;
 	} while (!is_last_gpte(mmu, walker->level, pte));
 
-	if (unlikely(permission_fault(vcpu, mmu, pte_access, access))) {
-		errcode |= PFERR_PRESENT_MASK;
+	pte_pkey = FNAME(gpte_pkeys)(vcpu, pte);
+	errcode = permission_fault(vcpu, mmu, pte_access, pte_pkey, access);
+	if (unlikely(errcode))
 		goto error;
-	}
 
 	gfn = gpte_to_gfn_lvl(pte, walker->level);
 	gfn += (addr & PT_LVL_OFFSET_MASK(walker->level)) >> PAGE_SHIFT;
@@ -456,7 +470,7 @@ FNAME(prefetch_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 {
 	unsigned pte_access;
 	gfn_t gfn;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 
 	if (FNAME(prefetch_invalid_gpte)(vcpu, sp, spte, gpte))
 		return false;
@@ -475,8 +489,8 @@ FNAME(prefetch_gpte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 	 * we call mmu_set_spte() with host_writable = true because
 	 * pte_prefetch_gfn_to_pfn always gets a writable pfn.
 	 */
-	mmu_set_spte(vcpu, spte, pte_access, 0, NULL, PT_PAGE_TABLE_LEVEL,
-		     gfn, pfn, true, true);
+	mmu_set_spte(vcpu, spte, pte_access, 0, PT_PAGE_TABLE_LEVEL, gfn, pfn,
+		     true, true);
 
 	return true;
 }
@@ -551,12 +565,12 @@ static void FNAME(pte_prefetch)(struct kvm_vcpu *vcpu, struct guest_walker *gw,
 static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			 struct guest_walker *gw,
 			 int write_fault, int hlevel,
-			 pfn_t pfn, bool map_writable, bool prefault)
+			 kvm_pfn_t pfn, bool map_writable, bool prefault)
 {
 	struct kvm_mmu_page *sp = NULL;
 	struct kvm_shadow_walk_iterator it;
 	unsigned direct_access, access = gw->pt_access;
-	int top_level, emulate = 0;
+	int top_level, emulate;
 
 	direct_access = gw->pte_access;
 
@@ -587,7 +601,7 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		if (!is_shadow_present_pte(*it.sptep)) {
 			table_gfn = gw->table_gfn[it.level - 2];
 			sp = kvm_mmu_get_page(vcpu, table_gfn, addr, it.level-1,
-					      false, access, it.sptep);
+					      false, access);
 		}
 
 		/*
@@ -598,7 +612,7 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			goto out_gpte_changed;
 
 		if (sp)
-			link_shadow_page(it.sptep, sp, PT_GUEST_ACCESSED_MASK);
+			link_shadow_page(vcpu, it.sptep, sp);
 	}
 
 	for (;
@@ -617,20 +631,18 @@ static int FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		direct_gfn = gw->gfn & ~(KVM_PAGES_PER_HPAGE(it.level) - 1);
 
 		sp = kvm_mmu_get_page(vcpu, direct_gfn, addr, it.level-1,
-				      true, direct_access, it.sptep);
-		link_shadow_page(it.sptep, sp, PT_GUEST_ACCESSED_MASK);
+				      true, direct_access);
+		link_shadow_page(vcpu, it.sptep, sp);
 	}
 
 	clear_sp_write_flooding_count(it.sptep);
-	mmu_set_spte(vcpu, it.sptep, gw->pte_access, write_fault, &emulate,
-		     it.level, gw->gfn, pfn, prefault, map_writable);
+	emulate = mmu_set_spte(vcpu, it.sptep, gw->pte_access, write_fault,
+			       it.level, gw->gfn, pfn, prefault, map_writable);
 	FNAME(pte_prefetch)(vcpu, gw, it.sptep);
 
 	return emulate;
 
 out_gpte_changed:
-	if (sp)
-		kvm_mmu_put_page(sp, it.sptep);
 	kvm_release_pfn_clean(pfn);
 	return 0;
 }
@@ -696,7 +708,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code,
 	int user_fault = error_code & PFERR_USER_MASK;
 	struct guest_walker walker;
 	int r;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 	int level = PT_PAGE_TABLE_LEVEL;
 	bool force_pt_level = false;
 	unsigned long mmu_seq;
@@ -704,25 +716,17 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code,
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
 
-	if (unlikely(error_code & PFERR_RSVD_MASK)) {
-		r = handle_mmio_page_fault(vcpu, addr, error_code,
-					      mmu_is_nested(vcpu));
-		if (likely(r != RET_MMIO_PF_INVALID))
-			return r;
-
-		/*
-		 * page fault with PFEC.RSVD  = 1 is caused by shadow
-		 * page fault, should not be used to walk guest page
-		 * table.
-		 */
-		error_code &= ~PFERR_RSVD_MASK;
-	};
-
 	r = mmu_topup_memory_caches(vcpu);
 	if (r)
 		return r;
 
 	/*
+	 * If PFEC.RSVD is set, this is a shadow page fault.
+	 * The bit needs to be cleared before walking guest page tables.
+	 */
+	error_code &= ~PFERR_RSVD_MASK;
+
+	/*
 	 * Look up the guest pte for the faulting address.
 	 */
 	r = FNAME(walk_addr)(&walker, vcpu, addr, error_code);
@@ -738,6 +742,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, u32 error_code,
 		return 0;
 	}
 
+	if (page_fault_handle_page_track(vcpu, error_code, walker.gfn)) {
+		shadow_page_table_clear_flood(vcpu, addr);
+		return 1;
+	}
+
 	vcpu->arch.write_fault_to_shadow_pgtable = false;
 
 	is_self_change_mapping = FNAME(is_self_change_mapping)(vcpu,
@@ -948,9 +957,15 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 
 		if (kvm_vcpu_read_guest_atomic(vcpu, pte_gpa, &gpte,
 					       sizeof(pt_element_t)))
-			return -EINVAL;
+			return 0;
 
 		if (FNAME(prefetch_invalid_gpte)(vcpu, sp, &sp->spt[i], gpte)) {
+			/*
+			 * Update spte before increasing tlbs_dirty to make
+			 * sure no tlb flush is lost after spte is zapped; see
+			 * the comments in kvm_flush_remote_tlbs().
+			 */
+			smp_wmb();
 			vcpu->kvm->tlbs_dirty++;
 			continue;
 		}
@@ -966,6 +981,11 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 
 		if (gfn != sp->gfns[i]) {
 			drop_spte(vcpu->kvm, &sp->spt[i]);
+			/*
+			 * The same as above where we are doing
+			 * prefetch_invalid_gpte().
+			 */
+			smp_wmb();
 			vcpu->kvm->tlbs_dirty++;
 			continue;
 		}
@@ -980,7 +1000,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 			 host_writable);
 	}
 
-	return !nr_present;
+	return nr_present;
 }
 
 #undef pt_element_t
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 31aa2c85dc97..06ce377dcbc9 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -257,7 +257,7 @@ int kvm_pmu_rdpmc(struct kvm_vcpu *vcpu, unsigned idx, u64 *data)
 
 void kvm_pmu_deliver_pmi(struct kvm_vcpu *vcpu)
 {
-	if (vcpu->arch.apic)
+	if (lapic_in_kernel(vcpu))
 		kvm_apic_local_deliver(vcpu->arch.apic, APIC_LVTPC);
 }
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index f2c8e4917688..31346a3f20a5 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -86,6 +86,7 @@ static const u32 host_save_user_msrs[] = {
 	MSR_FS_BASE,
 #endif
 	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
+	MSR_TSC_AUX,
 };
 
 #define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
@@ -135,6 +136,7 @@ struct vcpu_svm {
 	uint64_t asid_generation;
 	uint64_t sysenter_esp;
 	uint64_t sysenter_eip;
+	uint64_t tsc_aux;
 
 	u64 next_rip;
 
@@ -158,8 +160,6 @@ struct vcpu_svm {
 	unsigned long int3_rip;
 	u32 apf_reason;
 
-	u64  tsc_ratio;
-
 	/* cached guest cpuid flags for faster access */
 	bool nrips_enabled	: 1;
 };
@@ -214,7 +214,6 @@ static int nested_svm_intercept(struct vcpu_svm *svm);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code);
-static u64 __scale_tsc(u64 ratio, u64 tsc);
 
 enum {
 	VMCB_INTERCEPTS, /* Intercept vectors, TSC offset,
@@ -894,20 +893,9 @@ static __init int svm_hardware_setup(void)
 		kvm_enable_efer_bits(EFER_FFXSR);
 
 	if (boot_cpu_has(X86_FEATURE_TSCRATEMSR)) {
-		u64 max;
-
 		kvm_has_tsc_control = true;
-
-		/*
-		 * Make sure the user can only configure tsc_khz values that
-		 * fit into a signed integer.
-		 * A min value is not calculated needed because it will always
-		 * be 1 on all machines and a value of 0 is used to disable
-		 * tsc-scaling for the vcpu.
-		 */
-		max = min(0x7fffffffULL, __scale_tsc(tsc_khz, TSC_RATIO_MAX));
-
-		kvm_max_guest_tsc_khz = max;
+		kvm_max_tsc_scaling_ratio = TSC_RATIO_MAX;
+		kvm_tsc_scaling_ratio_frac_bits = 32;
 	}
 
 	if (nested) {
@@ -971,68 +959,6 @@ static void init_sys_seg(struct vmcb_seg *seg, uint32_t type)
 	seg->base = 0;
 }
 
-static u64 __scale_tsc(u64 ratio, u64 tsc)
-{
-	u64 mult, frac, _tsc;
-
-	mult  = ratio >> 32;
-	frac  = ratio & ((1ULL << 32) - 1);
-
-	_tsc  = tsc;
-	_tsc *= mult;
-	_tsc += (tsc >> 32) * frac;
-	_tsc += ((tsc & ((1ULL << 32) - 1)) * frac) >> 32;
-
-	return _tsc;
-}
-
-static u64 svm_scale_tsc(struct kvm_vcpu *vcpu, u64 tsc)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-	u64 _tsc = tsc;
-
-	if (svm->tsc_ratio != TSC_RATIO_DEFAULT)
-		_tsc = __scale_tsc(svm->tsc_ratio, tsc);
-
-	return _tsc;
-}
-
-static void svm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-	u64 ratio;
-	u64 khz;
-
-	/* Guest TSC same frequency as host TSC? */
-	if (!scale) {
-		svm->tsc_ratio = TSC_RATIO_DEFAULT;
-		return;
-	}
-
-	/* TSC scaling supported? */
-	if (!boot_cpu_has(X86_FEATURE_TSCRATEMSR)) {
-		if (user_tsc_khz > tsc_khz) {
-			vcpu->arch.tsc_catchup = 1;
-			vcpu->arch.tsc_always_catchup = 1;
-		} else
-			WARN(1, "user requested TSC rate below hardware speed\n");
-		return;
-	}
-
-	khz = user_tsc_khz;
-
-	/* TSC scaling required  - calculate ratio */
-	ratio = khz << 32;
-	do_div(ratio, tsc_khz);
-
-	if (ratio == 0 || ratio & TSC_RATIO_RSVD) {
-		WARN_ONCE(1, "Invalid TSC ratio - virtual-tsc-khz=%u\n",
-				user_tsc_khz);
-		return;
-	}
-	svm->tsc_ratio             = ratio;
-}
-
 static u64 svm_read_tsc_offset(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -1059,16 +985,10 @@ static void svm_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
 	mark_dirty(svm->vmcb, VMCB_INTERCEPTS);
 }
 
-static void svm_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool host)
+static void svm_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (host) {
-		if (svm->tsc_ratio != TSC_RATIO_DEFAULT)
-			WARN_ON(adjustment < 0);
-		adjustment = svm_scale_tsc(vcpu, (u64)adjustment);
-	}
-
 	svm->vmcb->control.tsc_offset += adjustment;
 	if (is_guest_mode(vcpu))
 		svm->nested.hsave->control.tsc_offset += adjustment;
@@ -1080,15 +1000,6 @@ static void svm_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool ho
 	mark_dirty(svm->vmcb, VMCB_INTERCEPTS);
 }
 
-static u64 svm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)
-{
-	u64 tsc;
-
-	tsc = svm_scale_tsc(vcpu, rdtsc());
-
-	return target_tsc - tsc;
-}
-
 static void init_vmcb(struct vcpu_svm *svm)
 {
 	struct vmcb_control_area *control = &svm->vmcb->control;
@@ -1110,6 +1021,8 @@ static void init_vmcb(struct vcpu_svm *svm)
 	set_exception_intercept(svm, PF_VECTOR);
 	set_exception_intercept(svm, UD_VECTOR);
 	set_exception_intercept(svm, MC_VECTOR);
+	set_exception_intercept(svm, AC_VECTOR);
+	set_exception_intercept(svm, DB_VECTOR);
 
 	set_intercept(svm, INTERCEPT_INTR);
 	set_intercept(svm, INTERCEPT_NMI);
@@ -1235,8 +1148,6 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 		goto out;
 	}
 
-	svm->tsc_ratio = TSC_RATIO_DEFAULT;
-
 	err = kvm_vcpu_init(&svm->vcpu, kvm, id);
 	if (err)
 		goto free_svm;
@@ -1322,11 +1233,16 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
 		rdmsrl(host_save_user_msrs[i], svm->host_user_msrs[i]);
 
-	if (static_cpu_has(X86_FEATURE_TSCRATEMSR) &&
-	    svm->tsc_ratio != __this_cpu_read(current_tsc_ratio)) {
-		__this_cpu_write(current_tsc_ratio, svm->tsc_ratio);
-		wrmsrl(MSR_AMD64_TSC_RATIO, svm->tsc_ratio);
+	if (static_cpu_has(X86_FEATURE_TSCRATEMSR)) {
+		u64 tsc_ratio = vcpu->arch.tsc_scaling_ratio;
+		if (tsc_ratio != __this_cpu_read(current_tsc_ratio)) {
+			__this_cpu_write(current_tsc_ratio, tsc_ratio);
+			wrmsrl(MSR_AMD64_TSC_RATIO, tsc_ratio);
+		}
 	}
+	/* This assumes that the kernel never uses MSR_TSC_AUX */
+	if (static_cpu_has(X86_FEATURE_RDTSCP))
+		wrmsrl(MSR_TSC_AUX, svm->tsc_aux);
 }
 
 static void svm_vcpu_put(struct kvm_vcpu *vcpu)
@@ -1364,6 +1280,11 @@ static void svm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 	to_svm(vcpu)->vmcb->save.rflags = rflags;
 }
 
+static u32 svm_get_pkru(struct kvm_vcpu *vcpu)
+{
+	return 0;
+}
+
 static void svm_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 {
 	switch (reg) {
@@ -1644,20 +1565,13 @@ static void svm_set_segment(struct kvm_vcpu *vcpu,
 	mark_dirty(svm->vmcb, VMCB_SEG);
 }
 
-static void update_db_bp_intercept(struct kvm_vcpu *vcpu)
+static void update_bp_intercept(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	clr_exception_intercept(svm, DB_VECTOR);
 	clr_exception_intercept(svm, BP_VECTOR);
 
-	if (svm->nmi_singlestep)
-		set_exception_intercept(svm, DB_VECTOR);
-
 	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
-		if (vcpu->guest_debug &
-		    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
-			set_exception_intercept(svm, DB_VECTOR);
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
 			set_exception_intercept(svm, BP_VECTOR);
 	} else
@@ -1763,7 +1677,6 @@ static int db_interception(struct vcpu_svm *svm)
 		if (!(svm->vcpu.guest_debug & KVM_GUESTDBG_SINGLESTEP))
 			svm->vmcb->save.rflags &=
 				~(X86_EFLAGS_TF | X86_EFLAGS_RF);
-		update_db_bp_intercept(&svm->vcpu);
 	}
 
 	if (svm->vcpu.guest_debug &
@@ -1798,6 +1711,12 @@ static int ud_interception(struct vcpu_svm *svm)
 	return 1;
 }
 
+static int ac_interception(struct vcpu_svm *svm)
+{
+	kvm_queue_exception_e(&svm->vcpu, AC_VECTOR, 0);
+	return 1;
+}
+
 static void svm_fpu_activate(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -1944,8 +1863,7 @@ static int halt_interception(struct vcpu_svm *svm)
 static int vmmcall_interception(struct vcpu_svm *svm)
 {
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
-	kvm_emulate_hypercall(&svm->vcpu);
-	return 1;
+	return kvm_emulate_hypercall(&svm->vcpu);
 }
 
 static unsigned long nested_svm_get_tdp_cr3(struct kvm_vcpu *vcpu)
@@ -3075,8 +2993,7 @@ static int cr8_write_interception(struct vcpu_svm *svm)
 static u64 svm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc)
 {
 	struct vmcb *vmcb = get_host_vmcb(to_svm(vcpu));
-	return vmcb->control.tsc_offset +
-		svm_scale_tsc(vcpu, host_tsc);
+	return vmcb->control.tsc_offset + host_tsc;
 }
 
 static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
@@ -3086,7 +3003,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	switch (msr_info->index) {
 	case MSR_IA32_TSC: {
 		msr_info->data = svm->vmcb->control.tsc_offset +
-			svm_scale_tsc(vcpu, rdtsc());
+			kvm_scale_tsc(vcpu, rdtsc());
 
 		break;
 	}
@@ -3116,6 +3033,11 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_SYSENTER_ESP:
 		msr_info->data = svm->sysenter_esp;
 		break;
+	case MSR_TSC_AUX:
+		if (!boot_cpu_has(X86_FEATURE_RDTSCP))
+			return 1;
+		msr_info->data = svm->tsc_aux;
+		break;
 	/*
 	 * Nobody will change the following 5 values in the VMCB so we can
 	 * safely return them on rdmsr. They will always be 0 until LBRV is
@@ -3145,6 +3067,23 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_UCODE_REV:
 		msr_info->data = 0x01000065;
 		break;
+	case MSR_F15H_IC_CFG: {
+
+		int family, model;
+
+		family = guest_cpuid_family(vcpu);
+		model  = guest_cpuid_model(vcpu);
+
+		if (family < 0 || model < 0)
+			return kvm_get_msr_common(vcpu, msr_info);
+
+		msr_info->data = 0;
+
+		if (family == 0x15 &&
+		    (model >= 0x2 && model < 0x20))
+			msr_info->data = 0x1E;
+		}
+		break;
 	default:
 		return kvm_get_msr_common(vcpu, msr_info);
 	}
@@ -3237,6 +3176,18 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 		svm->sysenter_esp = data;
 		svm->vmcb->save.sysenter_esp = data;
 		break;
+	case MSR_TSC_AUX:
+		if (!boot_cpu_has(X86_FEATURE_RDTSCP))
+			return 1;
+
+		/*
+		 * This is rare, so we update the MSR here instead of using
+		 * direct_access_msrs.  Doing that would require a rdmsr in
+		 * svm_vcpu_put.
+		 */
+		svm->tsc_aux = data;
+		wrmsrl(MSR_TSC_AUX, svm->tsc_aux);
+		break;
 	case MSR_IA32_DEBUGCTLMSR:
 		if (!boot_cpu_has(X86_FEATURE_LBRV)) {
 			vcpu_unimpl(vcpu, "%s: MSR_IA32_DEBUGCTL 0x%llx, nop\n",
@@ -3362,6 +3313,7 @@ static int (*const svm_exit_handlers[])(struct vcpu_svm *svm) = {
 	[SVM_EXIT_EXCP_BASE + PF_VECTOR]	= pf_interception,
 	[SVM_EXIT_EXCP_BASE + NM_VECTOR]	= nm_interception,
 	[SVM_EXIT_EXCP_BASE + MC_VECTOR]	= mc_interception,
+	[SVM_EXIT_EXCP_BASE + AC_VECTOR]	= ac_interception,
 	[SVM_EXIT_INTR]				= intr_interception,
 	[SVM_EXIT_NMI]				= nmi_interception,
 	[SVM_EXIT_SMI]				= nop_on_interception,
@@ -3513,6 +3465,8 @@ static int handle_exit(struct kvm_vcpu *vcpu)
 	struct kvm_run *kvm_run = vcpu->run;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
+	trace_kvm_exit(exit_code, vcpu, KVM_ISA_SVM);
+
 	if (!is_cr_intercept(svm, INTERCEPT_CR0_WRITE))
 		vcpu->arch.cr0 = svm->vmcb->save.cr0;
 	if (npt_enabled)
@@ -3650,12 +3604,16 @@ static void svm_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
 	return;
 }
 
-static int svm_cpu_uses_apicv(struct kvm_vcpu *vcpu)
+static bool svm_get_enable_apicv(void)
+{
+	return false;
+}
+
+static void svm_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
 {
-	return 0;
 }
 
-static void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu)
+static void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
 {
 	return;
 }
@@ -3745,7 +3703,6 @@ static void enable_nmi_window(struct kvm_vcpu *vcpu)
 	 */
 	svm->nmi_singlestep = true;
 	svm->vmcb->save.rflags |= (X86_EFLAGS_TF | X86_EFLAGS_RF);
-	update_db_bp_intercept(vcpu);
 }
 
 static int svm_set_tss_addr(struct kvm *kvm, unsigned int addr)
@@ -3984,8 +3941,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
 	vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
 
-	trace_kvm_exit(svm->vmcb->control.exit_code, vcpu, KVM_ISA_SVM);
-
 	if (unlikely(svm->vmcb->control.exit_code == SVM_EXIT_NMI))
 		kvm_before_handle_nmi(&svm->vcpu);
 
@@ -4129,7 +4084,7 @@ static int svm_get_lpage_level(void)
 
 static bool svm_rdtscp_supported(void)
 {
-	return false;
+	return boot_cpu_has(X86_FEATURE_RDTSCP);
 }
 
 static bool svm_invpcid_supported(void)
@@ -4371,7 +4326,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.vcpu_load = svm_vcpu_load,
 	.vcpu_put = svm_vcpu_put,
 
-	.update_db_bp_intercept = update_db_bp_intercept,
+	.update_bp_intercept = update_bp_intercept,
 	.get_msr = svm_get_msr,
 	.set_msr = svm_set_msr,
 	.get_segment_base = svm_get_segment_base,
@@ -4397,6 +4352,9 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.cache_reg = svm_cache_reg,
 	.get_rflags = svm_get_rflags,
 	.set_rflags = svm_set_rflags,
+
+	.get_pkru = svm_get_pkru,
+
 	.fpu_activate = svm_fpu_activate,
 	.fpu_deactivate = svm_fpu_deactivate,
 
@@ -4420,7 +4378,8 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.enable_irq_window = enable_irq_window,
 	.update_cr8_intercept = update_cr8_intercept,
 	.set_virtual_x2apic_mode = svm_set_virtual_x2apic_mode,
-	.cpu_uses_apicv = svm_cpu_uses_apicv,
+	.get_enable_apicv = svm_get_enable_apicv,
+	.refresh_apicv_exec_ctrl = svm_refresh_apicv_exec_ctrl,
 	.load_eoi_exitmap = svm_load_eoi_exitmap,
 	.sync_pir_to_irr = svm_sync_pir_to_irr,
 
@@ -4443,11 +4402,9 @@ static struct kvm_x86_ops svm_x86_ops = {
 
 	.has_wbinvd_exit = svm_has_wbinvd_exit,
 
-	.set_tsc_khz = svm_set_tsc_khz,
 	.read_tsc_offset = svm_read_tsc_offset,
 	.write_tsc_offset = svm_write_tsc_offset,
-	.adjust_tsc_offset = svm_adjust_tsc_offset,
-	.compute_tsc_offset = svm_compute_tsc_offset,
+	.adjust_tsc_offset_guest = svm_adjust_tsc_offset_guest,
 	.read_l1_tsc = svm_read_l1_tsc,
 
 	.set_tdp_cr3 = set_tdp_cr3,
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 120302511802..2f1ea2f61e1f 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -268,7 +268,7 @@ TRACE_EVENT(kvm_inj_virq,
 #define kvm_trace_sym_exc						\
 	EXS(DE), EXS(DB), EXS(BP), EXS(OF), EXS(BR), EXS(UD), EXS(NM),	\
 	EXS(DF), EXS(TS), EXS(NP), EXS(SS), EXS(GP), EXS(PF),		\
-	EXS(MF), EXS(MC)
+	EXS(MF), EXS(AC), EXS(MC)
 
 /*
  * Tracepoint for kvm interrupt injection:
@@ -996,11 +996,13 @@ TRACE_EVENT(kvm_enter_smm,
  * Tracepoint for VT-d posted-interrupts.
  */
 TRACE_EVENT(kvm_pi_irte_update,
-	TP_PROTO(unsigned int vcpu_id, unsigned int gsi,
-		 unsigned int gvec, u64 pi_desc_addr, bool set),
-	TP_ARGS(vcpu_id, gsi, gvec, pi_desc_addr, set),
+	TP_PROTO(unsigned int host_irq, unsigned int vcpu_id,
+		 unsigned int gsi, unsigned int gvec,
+		 u64 pi_desc_addr, bool set),
+	TP_ARGS(host_irq, vcpu_id, gsi, gvec, pi_desc_addr, set),
 
 	TP_STRUCT__entry(
+		__field(	unsigned int,	host_irq	)
 		__field(	unsigned int,	vcpu_id		)
 		__field(	unsigned int,	gsi		)
 		__field(	unsigned int,	gvec		)
@@ -1009,6 +1011,7 @@ TRACE_EVENT(kvm_pi_irte_update,
 	),
 
 	TP_fast_assign(
+		__entry->host_irq	= host_irq;
 		__entry->vcpu_id	= vcpu_id;
 		__entry->gsi		= gsi;
 		__entry->gvec		= gvec;
@@ -1016,15 +1019,279 @@ TRACE_EVENT(kvm_pi_irte_update,
 		__entry->set		= set;
 	),
 
-	TP_printk("VT-d PI is %s for this irq, vcpu %u, gsi: 0x%x, "
+	TP_printk("VT-d PI is %s for irq %u, vcpu %u, gsi: 0x%x, "
 		  "gvec: 0x%x, pi_desc_addr: 0x%llx",
 		  __entry->set ? "enabled and being updated" : "disabled",
+		  __entry->host_irq,
 		  __entry->vcpu_id,
 		  __entry->gsi,
 		  __entry->gvec,
 		  __entry->pi_desc_addr)
 );
 
+/*
+ * Tracepoint for kvm_hv_notify_acked_sint.
+ */
+TRACE_EVENT(kvm_hv_notify_acked_sint,
+	TP_PROTO(int vcpu_id, u32 sint),
+	TP_ARGS(vcpu_id, sint),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(u32, sint)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->sint = sint;
+	),
+
+	TP_printk("vcpu_id %d sint %u", __entry->vcpu_id, __entry->sint)
+);
+
+/*
+ * Tracepoint for synic_set_irq.
+ */
+TRACE_EVENT(kvm_hv_synic_set_irq,
+	TP_PROTO(int vcpu_id, u32 sint, int vector, int ret),
+	TP_ARGS(vcpu_id, sint, vector, ret),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(u32, sint)
+		__field(int, vector)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->sint = sint;
+		__entry->vector = vector;
+		__entry->ret = ret;
+	),
+
+	TP_printk("vcpu_id %d sint %u vector %d ret %d",
+		  __entry->vcpu_id, __entry->sint, __entry->vector,
+		  __entry->ret)
+);
+
+/*
+ * Tracepoint for kvm_hv_synic_send_eoi.
+ */
+TRACE_EVENT(kvm_hv_synic_send_eoi,
+	TP_PROTO(int vcpu_id, int vector),
+	TP_ARGS(vcpu_id, vector),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(u32, sint)
+		__field(int, vector)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->vector	= vector;
+	),
+
+	TP_printk("vcpu_id %d vector %d", __entry->vcpu_id, __entry->vector)
+);
+
+/*
+ * Tracepoint for synic_set_msr.
+ */
+TRACE_EVENT(kvm_hv_synic_set_msr,
+	TP_PROTO(int vcpu_id, u32 msr, u64 data, bool host),
+	TP_ARGS(vcpu_id, msr, data, host),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(u32, msr)
+		__field(u64, data)
+		__field(bool, host)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->msr = msr;
+		__entry->data = data;
+		__entry->host = host
+	),
+
+	TP_printk("vcpu_id %d msr 0x%x data 0x%llx host %d",
+		  __entry->vcpu_id, __entry->msr, __entry->data, __entry->host)
+);
+
+/*
+ * Tracepoint for stimer_set_config.
+ */
+TRACE_EVENT(kvm_hv_stimer_set_config,
+	TP_PROTO(int vcpu_id, int timer_index, u64 config, bool host),
+	TP_ARGS(vcpu_id, timer_index, config, host),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(int, timer_index)
+		__field(u64, config)
+		__field(bool, host)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->timer_index = timer_index;
+		__entry->config = config;
+		__entry->host = host;
+	),
+
+	TP_printk("vcpu_id %d timer %d config 0x%llx host %d",
+		  __entry->vcpu_id, __entry->timer_index, __entry->config,
+		  __entry->host)
+);
+
+/*
+ * Tracepoint for stimer_set_count.
+ */
+TRACE_EVENT(kvm_hv_stimer_set_count,
+	TP_PROTO(int vcpu_id, int timer_index, u64 count, bool host),
+	TP_ARGS(vcpu_id, timer_index, count, host),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(int, timer_index)
+		__field(u64, count)
+		__field(bool, host)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->timer_index = timer_index;
+		__entry->count = count;
+		__entry->host = host;
+	),
+
+	TP_printk("vcpu_id %d timer %d count %llu host %d",
+		  __entry->vcpu_id, __entry->timer_index, __entry->count,
+		  __entry->host)
+);
+
+/*
+ * Tracepoint for stimer_start(periodic timer case).
+ */
+TRACE_EVENT(kvm_hv_stimer_start_periodic,
+	TP_PROTO(int vcpu_id, int timer_index, u64 time_now, u64 exp_time),
+	TP_ARGS(vcpu_id, timer_index, time_now, exp_time),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(int, timer_index)
+		__field(u64, time_now)
+		__field(u64, exp_time)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->timer_index = timer_index;
+		__entry->time_now = time_now;
+		__entry->exp_time = exp_time;
+	),
+
+	TP_printk("vcpu_id %d timer %d time_now %llu exp_time %llu",
+		  __entry->vcpu_id, __entry->timer_index, __entry->time_now,
+		  __entry->exp_time)
+);
+
+/*
+ * Tracepoint for stimer_start(one-shot timer case).
+ */
+TRACE_EVENT(kvm_hv_stimer_start_one_shot,
+	TP_PROTO(int vcpu_id, int timer_index, u64 time_now, u64 count),
+	TP_ARGS(vcpu_id, timer_index, time_now, count),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(int, timer_index)
+		__field(u64, time_now)
+		__field(u64, count)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->timer_index = timer_index;
+		__entry->time_now = time_now;
+		__entry->count = count;
+	),
+
+	TP_printk("vcpu_id %d timer %d time_now %llu count %llu",
+		  __entry->vcpu_id, __entry->timer_index, __entry->time_now,
+		  __entry->count)
+);
+
+/*
+ * Tracepoint for stimer_timer_callback.
+ */
+TRACE_EVENT(kvm_hv_stimer_callback,
+	TP_PROTO(int vcpu_id, int timer_index),
+	TP_ARGS(vcpu_id, timer_index),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(int, timer_index)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->timer_index = timer_index;
+	),
+
+	TP_printk("vcpu_id %d timer %d",
+		  __entry->vcpu_id, __entry->timer_index)
+);
+
+/*
+ * Tracepoint for stimer_expiration.
+ */
+TRACE_EVENT(kvm_hv_stimer_expiration,
+	TP_PROTO(int vcpu_id, int timer_index, int msg_send_result),
+	TP_ARGS(vcpu_id, timer_index, msg_send_result),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(int, timer_index)
+		__field(int, msg_send_result)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->timer_index = timer_index;
+		__entry->msg_send_result = msg_send_result;
+	),
+
+	TP_printk("vcpu_id %d timer %d msg send result %d",
+		  __entry->vcpu_id, __entry->timer_index,
+		  __entry->msg_send_result)
+);
+
+/*
+ * Tracepoint for stimer_cleanup.
+ */
+TRACE_EVENT(kvm_hv_stimer_cleanup,
+	TP_PROTO(int vcpu_id, int timer_index),
+	TP_ARGS(vcpu_id, timer_index),
+
+	TP_STRUCT__entry(
+		__field(int, vcpu_id)
+		__field(int, timer_index)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id = vcpu_id;
+		__entry->timer_index = timer_index;
+	),
+
+	TP_printk("vcpu_id %d timer %d",
+		  __entry->vcpu_id, __entry->timer_index)
+);
+
 #endif /* _TRACE_KVM_H */
 
 #undef TRACE_INCLUDE_PATH
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 5eb56ed77c1f..ee1c8a93871c 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -19,6 +19,7 @@
 #include "irq.h"
 #include "mmu.h"
 #include "cpuid.h"
+#include "lapic.h"
 
 #include <linux/kvm_host.h>
 #include <linux/module.h>
@@ -107,6 +108,8 @@ static u64 __read_mostly host_xss;
 static bool __read_mostly enable_pml = 1;
 module_param_named(pml, enable_pml, bool, S_IRUGO);
 
+#define KVM_VMX_TSC_MULTIPLIER_MAX     0xffffffffffffffffULL
+
 #define KVM_GUEST_CR0_MASK (X86_CR0_NW | X86_CR0_CD)
 #define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST (X86_CR0_WP | X86_CR0_NE)
 #define KVM_VM_CR0_ALWAYS_ON						\
@@ -593,6 +596,12 @@ struct vcpu_vmx {
 	/* Support for PML */
 #define PML_ENTITY_NUM		512
 	struct page *pml_pg;
+
+	u64 current_tsc_ratio;
+
+	bool guest_pkru_valid;
+	u32 guest_pkru;
+	u32 host_pkru;
 };
 
 enum segment_cache_field {
@@ -858,9 +867,7 @@ static unsigned long nested_ept_get_cr3(struct kvm_vcpu *vcpu);
 static u64 construct_eptp(unsigned long root_hpa);
 static void kvm_cpu_vmxon(u64 addr);
 static void kvm_cpu_vmxoff(void);
-static bool vmx_mpx_supported(void);
 static bool vmx_xsaves_supported(void);
-static int vmx_cpu_uses_apicv(struct kvm_vcpu *vcpu);
 static int vmx_set_tss_addr(struct kvm *kvm, unsigned int addr);
 static void vmx_set_segment(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg);
@@ -868,7 +875,6 @@ static void vmx_get_segment(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg);
 static bool guest_state_valid(struct kvm_vcpu *vcpu);
 static u32 vmx_segment_access_rights(struct kvm_segment *var);
-static void vmx_sync_pir_to_irr_dummy(struct kvm_vcpu *vcpu);
 static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx);
 static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx);
 static int alloc_identity_pagetable(struct kvm *kvm);
@@ -960,25 +966,36 @@ static const u32 vmx_msr_index[] = {
 	MSR_EFER, MSR_TSC_AUX, MSR_STAR,
 };
 
-static inline bool is_page_fault(u32 intr_info)
+static inline bool is_exception_n(u32 intr_info, u8 vector)
 {
 	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
 			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_HARD_EXCEPTION | PF_VECTOR | INTR_INFO_VALID_MASK);
+		(INTR_TYPE_HARD_EXCEPTION | vector | INTR_INFO_VALID_MASK);
+}
+
+static inline bool is_debug(u32 intr_info)
+{
+	return is_exception_n(intr_info, DB_VECTOR);
+}
+
+static inline bool is_breakpoint(u32 intr_info)
+{
+	return is_exception_n(intr_info, BP_VECTOR);
+}
+
+static inline bool is_page_fault(u32 intr_info)
+{
+	return is_exception_n(intr_info, PF_VECTOR);
 }
 
 static inline bool is_no_device(u32 intr_info)
 {
-	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
-			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_HARD_EXCEPTION | NM_VECTOR | INTR_INFO_VALID_MASK);
+	return is_exception_n(intr_info, NM_VECTOR);
 }
 
 static inline bool is_invalid_opcode(u32 intr_info)
 {
-	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
-			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_HARD_EXCEPTION | UD_VECTOR | INTR_INFO_VALID_MASK);
+	return is_exception_n(intr_info, UD_VECTOR);
 }
 
 static inline bool is_external_interrupt(u32 intr_info)
@@ -1172,6 +1189,12 @@ static inline bool cpu_has_vmx_pml(void)
 	return vmcs_config.cpu_based_2nd_exec_ctrl & SECONDARY_EXEC_ENABLE_PML;
 }
 
+static inline bool cpu_has_vmx_tsc_scaling(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_TSC_SCALING;
+}
+
 static inline bool report_flexpriority(void)
 {
 	return flexpriority_enabled;
@@ -1440,7 +1463,51 @@ static inline void ept_sync_context(u64 eptp)
 	}
 }
 
-static __always_inline unsigned long vmcs_readl(unsigned long field)
+static __always_inline void vmcs_check16(unsigned long field)
+{
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2000,
+			 "16-bit accessor invalid for 64-bit field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2001,
+			 "16-bit accessor invalid for 64-bit high field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x4000,
+			 "16-bit accessor invalid for 32-bit high field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x6000,
+			 "16-bit accessor invalid for natural width field");
+}
+
+static __always_inline void vmcs_check32(unsigned long field)
+{
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0,
+			 "32-bit accessor invalid for 16-bit field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x6000,
+			 "32-bit accessor invalid for natural width field");
+}
+
+static __always_inline void vmcs_check64(unsigned long field)
+{
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0,
+			 "64-bit accessor invalid for 16-bit field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2001,
+			 "64-bit accessor invalid for 64-bit high field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x4000,
+			 "64-bit accessor invalid for 32-bit field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x6000,
+			 "64-bit accessor invalid for natural width field");
+}
+
+static __always_inline void vmcs_checkl(unsigned long field)
+{
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0,
+			 "Natural width accessor invalid for 16-bit field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2000,
+			 "Natural width accessor invalid for 64-bit field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6001) == 0x2001,
+			 "Natural width accessor invalid for 64-bit high field");
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x4000,
+			 "Natural width accessor invalid for 32-bit field");
+}
+
+static __always_inline unsigned long __vmcs_readl(unsigned long field)
 {
 	unsigned long value;
 
@@ -1451,23 +1518,32 @@ static __always_inline unsigned long vmcs_readl(unsigned long field)
 
 static __always_inline u16 vmcs_read16(unsigned long field)
 {
-	return vmcs_readl(field);
+	vmcs_check16(field);
+	return __vmcs_readl(field);
 }
 
 static __always_inline u32 vmcs_read32(unsigned long field)
 {
-	return vmcs_readl(field);
+	vmcs_check32(field);
+	return __vmcs_readl(field);
 }
 
 static __always_inline u64 vmcs_read64(unsigned long field)
 {
+	vmcs_check64(field);
 #ifdef CONFIG_X86_64
-	return vmcs_readl(field);
+	return __vmcs_readl(field);
 #else
-	return vmcs_readl(field) | ((u64)vmcs_readl(field+1) << 32);
+	return __vmcs_readl(field) | ((u64)__vmcs_readl(field+1) << 32);
 #endif
 }
 
+static __always_inline unsigned long vmcs_readl(unsigned long field)
+{
+	vmcs_checkl(field);
+	return __vmcs_readl(field);
+}
+
 static noinline void vmwrite_error(unsigned long field, unsigned long value)
 {
 	printk(KERN_ERR "vmwrite error: reg %lx value %lx (err %d)\n",
@@ -1475,7 +1551,7 @@ static noinline void vmwrite_error(unsigned long field, unsigned long value)
 	dump_stack();
 }
 
-static void vmcs_writel(unsigned long field, unsigned long value)
+static __always_inline void __vmcs_writel(unsigned long field, unsigned long value)
 {
 	u8 error;
 
@@ -1485,33 +1561,46 @@ static void vmcs_writel(unsigned long field, unsigned long value)
 		vmwrite_error(field, value);
 }
 
-static void vmcs_write16(unsigned long field, u16 value)
+static __always_inline void vmcs_write16(unsigned long field, u16 value)
 {
-	vmcs_writel(field, value);
+	vmcs_check16(field);
+	__vmcs_writel(field, value);
 }
 
-static void vmcs_write32(unsigned long field, u32 value)
+static __always_inline void vmcs_write32(unsigned long field, u32 value)
 {
-	vmcs_writel(field, value);
+	vmcs_check32(field);
+	__vmcs_writel(field, value);
 }
 
-static void vmcs_write64(unsigned long field, u64 value)
+static __always_inline void vmcs_write64(unsigned long field, u64 value)
 {
-	vmcs_writel(field, value);
+	vmcs_check64(field);
+	__vmcs_writel(field, value);
 #ifndef CONFIG_X86_64
 	asm volatile ("");
-	vmcs_writel(field+1, value >> 32);
+	__vmcs_writel(field+1, value >> 32);
 #endif
 }
 
-static void vmcs_clear_bits(unsigned long field, u32 mask)
+static __always_inline void vmcs_writel(unsigned long field, unsigned long value)
+{
+	vmcs_checkl(field);
+	__vmcs_writel(field, value);
+}
+
+static __always_inline void vmcs_clear_bits(unsigned long field, u32 mask)
 {
-	vmcs_writel(field, vmcs_readl(field) & ~mask);
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x2000,
+			 "vmcs_clear_bits does not support 64-bit fields");
+	__vmcs_writel(field, __vmcs_readl(field) & ~mask);
 }
 
-static void vmcs_set_bits(unsigned long field, u32 mask)
+static __always_inline void vmcs_set_bits(unsigned long field, u32 mask)
 {
-	vmcs_writel(field, vmcs_readl(field) | mask);
+        BUILD_BUG_ON_MSG(__builtin_constant_p(field) && ((field) & 0x6000) == 0x2000,
+			 "vmcs_set_bits does not support 64-bit fields");
+	__vmcs_writel(field, __vmcs_readl(field) | mask);
 }
 
 static inline void vm_entry_controls_init(struct vcpu_vmx *vmx, u32 val)
@@ -1631,7 +1720,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 	u32 eb;
 
 	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR) |
-	     (1u << NM_VECTOR) | (1u << DB_VECTOR);
+	     (1u << NM_VECTOR) | (1u << DB_VECTOR) | (1u << AC_VECTOR);
 	if ((vcpu->guest_debug &
 	     (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)) ==
 	    (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP))
@@ -1738,6 +1827,13 @@ static void add_atomic_switch_msr(struct vcpu_vmx *vmx, unsigned msr,
 			return;
 		}
 		break;
+	case MSR_IA32_PEBS_ENABLE:
+		/* PEBS needs a quiescent period after being disabled (to write
+		 * a record).  Disabling PEBS through VMX MSR swapping doesn't
+		 * provide that period, so a CPU could write host's record into
+		 * guest's memory.
+		 */
+		wrmsrl(MSR_IA32_PEBS_ENABLE, 0);
 	}
 
 	for (i = 0; i < m->nr; ++i)
@@ -1775,26 +1871,31 @@ static void reload_tss(void)
 
 static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
 {
-	u64 guest_efer;
-	u64 ignore_bits;
+	u64 guest_efer = vmx->vcpu.arch.efer;
+	u64 ignore_bits = 0;
 
-	guest_efer = vmx->vcpu.arch.efer;
+	if (!enable_ept) {
+		/*
+		 * NX is needed to handle CR0.WP=1, CR4.SMEP=1.  Testing
+		 * host CPUID is more efficient than testing guest CPUID
+		 * or CR4.  Host SMEP is anyway a requirement for guest SMEP.
+		 */
+		if (boot_cpu_has(X86_FEATURE_SMEP))
+			guest_efer |= EFER_NX;
+		else if (!(guest_efer & EFER_NX))
+			ignore_bits |= EFER_NX;
+	}
 
 	/*
-	 * NX is emulated; LMA and LME handled by hardware; SCE meaningless
-	 * outside long mode
+	 * LMA and LME handled by hardware; SCE meaningless outside long mode.
 	 */
-	ignore_bits = EFER_NX | EFER_SCE;
+	ignore_bits |= EFER_SCE;
 #ifdef CONFIG_X86_64
 	ignore_bits |= EFER_LMA | EFER_LME;
 	/* SCE is meaningful only in long mode on Intel */
 	if (guest_efer & EFER_LMA)
 		ignore_bits &= ~(u64)EFER_SCE;
 #endif
-	guest_efer &= ~ignore_bits;
-	guest_efer |= host_efer & ignore_bits;
-	vmx->guest_msrs[efer_offset].data = guest_efer;
-	vmx->guest_msrs[efer_offset].mask = ~ignore_bits;
 
 	clear_atomic_switch_msr(vmx, MSR_EFER);
 
@@ -1805,16 +1906,21 @@ static bool update_transition_efer(struct vcpu_vmx *vmx, int efer_offset)
 	 */
 	if (cpu_has_load_ia32_efer ||
 	    (enable_ept && ((vmx->vcpu.arch.efer ^ host_efer) & EFER_NX))) {
-		guest_efer = vmx->vcpu.arch.efer;
 		if (!(guest_efer & EFER_LMA))
 			guest_efer &= ~EFER_LME;
 		if (guest_efer != host_efer)
 			add_atomic_switch_msr(vmx, MSR_EFER,
 					      guest_efer, host_efer);
 		return false;
-	}
+	} else {
+		guest_efer &= ~ignore_bits;
+		guest_efer |= host_efer & ignore_bits;
 
-	return true;
+		vmx->guest_msrs[efer_offset].data = guest_efer;
+		vmx->guest_msrs[efer_offset].mask = ~ignore_bits;
+
+		return true;
+	}
 }
 
 static unsigned long segment_base(u16 selector)
@@ -2005,6 +2111,7 @@ static void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu)
 	} while (cmpxchg(&pi_desc->control, old.control,
 			new.control) != old.control);
 }
+
 /*
  * Switches to specified vcpu, until a matching vcpu_put(), but assumes
  * vcpu mutex is already taken.
@@ -2053,10 +2160,19 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 
 		rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
 		vmcs_writel(HOST_IA32_SYSENTER_ESP, sysenter_esp); /* 22.2.3 */
+
 		vmx->loaded_vmcs->cpu = cpu;
 	}
 
+	/* Setup TSC multiplier */
+	if (kvm_has_tsc_control &&
+	    vmx->current_tsc_ratio != vcpu->arch.tsc_scaling_ratio) {
+		vmx->current_tsc_ratio = vcpu->arch.tsc_scaling_ratio;
+		vmcs_write64(TSC_MULTIPLIER, vmx->current_tsc_ratio);
+	}
+
 	vmx_vcpu_pi_load(vcpu, cpu);
+	vmx->host_pkru = read_pkru();
 }
 
 static void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu)
@@ -2176,6 +2292,11 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 	vmcs_writel(GUEST_RFLAGS, rflags);
 }
 
+static u32 vmx_get_pkru(struct kvm_vcpu *vcpu)
+{
+	return to_vmx(vcpu)->guest_pkru;
+}
+
 static u32 vmx_get_interrupt_shadow(struct kvm_vcpu *vcpu)
 {
 	u32 interruptibility = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
@@ -2357,15 +2478,16 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 
 /*
  * reads and returns guest's timestamp counter "register"
- * guest_tsc = host_tsc + tsc_offset    -- 21.3
+ * guest_tsc = (host_tsc * tsc multiplier) >> 48 + tsc_offset
+ * -- Intel TSC Scaling for Virtualization White Paper, sec 1.3
  */
-static u64 guest_read_tsc(void)
+static u64 guest_read_tsc(struct kvm_vcpu *vcpu)
 {
 	u64 host_tsc, tsc_offset;
 
 	host_tsc = rdtsc();
 	tsc_offset = vmcs_read64(TSC_OFFSET);
-	return host_tsc + tsc_offset;
+	return kvm_scale_tsc(vcpu, host_tsc) + tsc_offset;
 }
 
 /*
@@ -2382,22 +2504,6 @@ static u64 vmx_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc)
 	return host_tsc + tsc_offset;
 }
 
-/*
- * Engage any workarounds for mis-matched TSC rates.  Currently limited to
- * software catchup for faster rates on slower CPUs.
- */
-static void vmx_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale)
-{
-	if (!scale)
-		return;
-
-	if (user_tsc_khz > tsc_khz) {
-		vcpu->arch.tsc_catchup = 1;
-		vcpu->arch.tsc_always_catchup = 1;
-	} else
-		WARN(1, "user requested TSC rate below hardware speed\n");
-}
-
 static u64 vmx_read_tsc_offset(struct kvm_vcpu *vcpu)
 {
 	return vmcs_read64(TSC_OFFSET);
@@ -2429,7 +2535,7 @@ static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
 	}
 }
 
-static void vmx_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool host)
+static void vmx_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment)
 {
 	u64 offset = vmcs_read64(TSC_OFFSET);
 
@@ -2442,11 +2548,6 @@ static void vmx_adjust_tsc_offset(struct kvm_vcpu *vcpu, s64 adjustment, bool ho
 					   offset + adjustment);
 }
 
-static u64 vmx_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)
-{
-	return target_tsc - rdtsc();
-}
-
 static bool guest_cpuid_has_vmx(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best = kvm_find_cpuid_entry(vcpu, 1, 0);
@@ -2504,7 +2605,7 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 	vmx->nested.nested_vmx_pinbased_ctls_high |=
 		PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR |
 		PIN_BASED_VMX_PREEMPTION_TIMER;
-	if (vmx_cpu_uses_apicv(&vmx->vcpu))
+	if (kvm_vcpu_apicv_active(&vmx->vcpu))
 		vmx->nested.nested_vmx_pinbased_ctls_high |=
 			PIN_BASED_POSTED_INTR;
 
@@ -2525,7 +2626,7 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 		VM_EXIT_LOAD_IA32_EFER | VM_EXIT_SAVE_IA32_EFER |
 		VM_EXIT_SAVE_VMX_PREEMPTION_TIMER | VM_EXIT_ACK_INTR_ON_EXIT;
 
-	if (vmx_mpx_supported())
+	if (kvm_mpx_supported())
 		vmx->nested.nested_vmx_exit_ctls_high |= VM_EXIT_CLEAR_BNDCFGS;
 
 	/* We support free control of debug control saving. */
@@ -2546,7 +2647,7 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 		VM_ENTRY_LOAD_IA32_PAT;
 	vmx->nested.nested_vmx_entry_ctls_high |=
 		(VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR | VM_ENTRY_LOAD_IA32_EFER);
-	if (vmx_mpx_supported())
+	if (kvm_mpx_supported())
 		vmx->nested.nested_vmx_entry_ctls_high |= VM_ENTRY_LOAD_BNDCFGS;
 
 	/* We support free control of debug control loading. */
@@ -2622,8 +2723,15 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 	} else
 		vmx->nested.nested_vmx_ept_caps = 0;
 
+	/*
+	 * Old versions of KVM use the single-context version without
+	 * checking for support, so declare that it is supported even
+	 * though it is treated as global context.  The alternative is
+	 * not failing the single-context invvpid, and it is worse.
+	 */
 	if (enable_vpid)
 		vmx->nested.nested_vmx_vpid_caps = VMX_VPID_INVVPID_BIT |
+				VMX_VPID_EXTENT_SINGLE_CONTEXT_BIT |
 				VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT;
 	else
 		vmx->nested.nested_vmx_vpid_caps = 0;
@@ -2778,7 +2886,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_EFER:
 		return kvm_get_msr_common(vcpu, msr_info);
 	case MSR_IA32_TSC:
-		msr_info->data = guest_read_tsc();
+		msr_info->data = guest_read_tsc(vcpu);
 		break;
 	case MSR_IA32_SYSENTER_CS:
 		msr_info->data = vmcs_read32(GUEST_SYSENTER_CS);
@@ -2790,7 +2898,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		msr_info->data = vmcs_readl(GUEST_SYSENTER_ESP);
 		break;
 	case MSR_IA32_BNDCFGS:
-		if (!vmx_mpx_supported())
+		if (!kvm_mpx_supported())
 			return 1;
 		msr_info->data = vmcs_read64(GUEST_BNDCFGS);
 		break;
@@ -2809,7 +2917,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		msr_info->data = vcpu->arch.ia32_xss;
 		break;
 	case MSR_TSC_AUX:
-		if (!guest_cpuid_has_rdtscp(vcpu))
+		if (!guest_cpuid_has_rdtscp(vcpu) && !msr_info->host_initiated)
 			return 1;
 		/* Otherwise falls through */
 	default:
@@ -2867,7 +2975,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		vmcs_writel(GUEST_SYSENTER_ESP, data);
 		break;
 	case MSR_IA32_BNDCFGS:
-		if (!vmx_mpx_supported())
+		if (!kvm_mpx_supported())
 			return 1;
 		vmcs_write64(GUEST_BNDCFGS, data);
 		break;
@@ -2915,7 +3023,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			clear_atomic_switch_msr(vmx, MSR_IA32_XSS);
 		break;
 	case MSR_TSC_AUX:
-		if (!guest_cpuid_has_rdtscp(vcpu))
+		if (!guest_cpuid_has_rdtscp(vcpu) && !msr_info->host_initiated)
 			return 1;
 		/* Check reserved bit, higher 32 bits should be zero */
 		if ((data >> 32) != 0)
@@ -3154,7 +3262,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 			SECONDARY_EXEC_SHADOW_VMCS |
 			SECONDARY_EXEC_XSAVES |
 			SECONDARY_EXEC_ENABLE_PML |
-			SECONDARY_EXEC_PCOMMIT;
+			SECONDARY_EXEC_PCOMMIT |
+			SECONDARY_EXEC_TSC_SCALING;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
 					&_cpu_based_2nd_exec_control) < 0)
@@ -3339,7 +3448,7 @@ static void init_vmcs_shadow_fields(void)
 	for (i = j = 0; i < max_shadow_read_write_fields; i++) {
 		switch (shadow_read_write_fields[i]) {
 		case GUEST_BNDCFGS:
-			if (!vmx_mpx_supported())
+			if (!kvm_mpx_supported())
 				continue;
 			break;
 		default:
@@ -3795,13 +3904,17 @@ static int vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 
 	if (!enable_unrestricted_guest && !is_paging(vcpu))
 		/*
-		 * SMEP/SMAP is disabled if CPU is in non-paging mode in
-		 * hardware.  However KVM always uses paging mode without
-		 * unrestricted guest.
-		 * To emulate this behavior, SMEP/SMAP needs to be manually
-		 * disabled when guest switches to non-paging mode.
+		 * SMEP/SMAP/PKU is disabled if CPU is in non-paging mode in
+		 * hardware.  To emulate this behavior, SMEP/SMAP/PKU needs
+		 * to be manually disabled when guest switches to non-paging
+		 * mode.
+		 *
+		 * If !enable_unrestricted_guest, the CPU is always running
+		 * with CR0.PG=1 and CR4 needs to be modified.
+		 * If enable_unrestricted_guest, the CPU automatically
+		 * disables SMEP/SMAP/PKU when the guest sets CR0.PG=0.
 		 */
-		hw_cr4 &= ~(X86_CR4_SMEP | X86_CR4_SMAP);
+		hw_cr4 &= ~(X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE);
 
 	vmcs_writel(CR4_READ_SHADOW, cr4);
 	vmcs_writel(GUEST_CR4, hw_cr4);
@@ -4191,7 +4304,7 @@ out:
 static int init_rmode_identity_map(struct kvm *kvm)
 {
 	int i, idx, r = 0;
-	pfn_t identity_map_pfn;
+	kvm_pfn_t identity_map_pfn;
 	u32 tmp;
 
 	if (!enable_ept)
@@ -4467,9 +4580,9 @@ static void vmx_disable_intercept_msr_write_x2apic(u32 msr)
 			msr, MSR_TYPE_W);
 }
 
-static int vmx_cpu_uses_apicv(struct kvm_vcpu *vcpu)
+static bool vmx_get_enable_apicv(void)
 {
-	return enable_apicv && lapic_in_kernel(vcpu);
+	return enable_apicv;
 }
 
 static int vmx_complete_nested_posted_interrupt(struct kvm_vcpu *vcpu)
@@ -4591,11 +4704,6 @@ static void vmx_sync_pir_to_irr(struct kvm_vcpu *vcpu)
 	kvm_apic_update_irr(vcpu, vmx->pi_desc.pir);
 }
 
-static void vmx_sync_pir_to_irr_dummy(struct kvm_vcpu *vcpu)
-{
-	return;
-}
-
 /*
  * Set up the vmcs's constant host-state fields, i.e., host-state fields that
  * will not change in the lifetime of the guest.
@@ -4665,11 +4773,18 @@ static u32 vmx_pin_based_exec_ctrl(struct vcpu_vmx *vmx)
 {
 	u32 pin_based_exec_ctrl = vmcs_config.pin_based_exec_ctrl;
 
-	if (!vmx_cpu_uses_apicv(&vmx->vcpu))
+	if (!kvm_vcpu_apicv_active(&vmx->vcpu))
 		pin_based_exec_ctrl &= ~PIN_BASED_POSTED_INTR;
 	return pin_based_exec_ctrl;
 }
 
+static void vmx_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
+{
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+	vmcs_write32(PIN_BASED_VM_EXEC_CONTROL, vmx_pin_based_exec_ctrl(vmx));
+}
+
 static u32 vmx_exec_control(struct vcpu_vmx *vmx)
 {
 	u32 exec_control = vmcs_config.cpu_based_exec_ctrl;
@@ -4708,7 +4823,7 @@ static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)
 		exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
 	if (!ple_gap)
 		exec_control &= ~SECONDARY_EXEC_PAUSE_LOOP_EXITING;
-	if (!vmx_cpu_uses_apicv(&vmx->vcpu))
+	if (!kvm_vcpu_apicv_active(&vmx->vcpu))
 		exec_control &= ~(SECONDARY_EXEC_APIC_REGISTER_VIRT |
 				  SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY);
 	exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE;
@@ -4772,7 +4887,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL,
 				vmx_secondary_exec_control(vmx));
 
-	if (vmx_cpu_uses_apicv(&vmx->vcpu)) {
+	if (kvm_vcpu_apicv_active(&vmx->vcpu)) {
 		vmcs_write64(EOI_EXIT_BITMAP0, 0);
 		vmcs_write64(EOI_EXIT_BITMAP1, 0);
 		vmcs_write64(EOI_EXIT_BITMAP2, 0);
@@ -4780,7 +4895,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
 		vmcs_write16(GUEST_INTR_STATUS, 0);
 
-		vmcs_write64(POSTED_INTR_NV, POSTED_INTR_VECTOR);
+		vmcs_write16(POSTED_INTR_NV, POSTED_INTR_VECTOR);
 		vmcs_write64(POSTED_INTR_DESC_ADDR, __pa((&vmx->pi_desc)));
 	}
 
@@ -4872,7 +4987,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 
 	seg_setup(VCPU_SREG_CS);
 	vmcs_write16(GUEST_CS_SELECTOR, 0xf000);
-	vmcs_write32(GUEST_CS_BASE, 0xffff0000);
+	vmcs_writel(GUEST_CS_BASE, 0xffff0000ul);
 
 	seg_setup(VCPU_SREG_DS);
 	seg_setup(VCPU_SREG_ES);
@@ -4908,7 +5023,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 
 	vmcs_write32(GUEST_ACTIVITY_STATE, GUEST_ACTIVITY_ACTIVE);
 	vmcs_write32(GUEST_INTERRUPTIBILITY_INFO, 0);
-	vmcs_write32(GUEST_PENDING_DBG_EXCEPTIONS, 0);
+	vmcs_writel(GUEST_PENDING_DBG_EXCEPTIONS, 0);
 
 	setup_msrs(vmx);
 
@@ -4924,7 +5039,7 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 
 	kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
 
-	if (vmx_cpu_uses_apicv(vcpu))
+	if (kvm_vcpu_apicv_active(vcpu))
 		memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
 
 	if (vmx->vpid != 0)
@@ -5266,6 +5381,9 @@ static int handle_exception(struct kvm_vcpu *vcpu)
 		return handle_rmode_exception(vcpu, ex_no, error_code);
 
 	switch (ex_no) {
+	case AC_VECTOR:
+		kvm_queue_exception_e(vcpu, AC_VECTOR, error_code);
+		return 1;
 	case DB_VECTOR:
 		dr6 = vmcs_readl(EXIT_QUALIFICATION);
 		if (!(vcpu->guest_debug &
@@ -5410,7 +5528,7 @@ static int handle_set_cr4(struct kvm_vcpu *vcpu, unsigned long val)
 		return kvm_set_cr4(vcpu, val);
 }
 
-/* called to set cr0 as approriate for clts instruction exit. */
+/* called to set cr0 as appropriate for clts instruction exit. */
 static void handle_clts(struct kvm_vcpu *vcpu)
 {
 	if (is_guest_mode(vcpu)) {
@@ -5543,11 +5661,8 @@ static int handle_dr(struct kvm_vcpu *vcpu)
 	}
 
 	if (vcpu->guest_debug == 0) {
-		u32 cpu_based_vm_exec_control;
-
-		cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
-		cpu_based_vm_exec_control &= ~CPU_BASED_MOV_DR_EXITING;
-		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+		vmcs_clear_bits(CPU_BASED_VM_EXEC_CONTROL,
+				CPU_BASED_MOV_DR_EXITING);
 
 		/*
 		 * No more DR vmexits; force a reload of the debug registers
@@ -5584,8 +5699,6 @@ static void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val)
 
 static void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu)
 {
-	u32 cpu_based_vm_exec_control;
-
 	get_debugreg(vcpu->arch.db[0], 0);
 	get_debugreg(vcpu->arch.db[1], 1);
 	get_debugreg(vcpu->arch.db[2], 2);
@@ -5594,10 +5707,7 @@ static void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu)
 	vcpu->arch.dr7 = vmcs_readl(GUEST_DR7);
 
 	vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_WONT_EXIT;
-
-	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
-	cpu_based_vm_exec_control |= CPU_BASED_MOV_DR_EXITING;
-	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+	vmcs_set_bits(CPU_BASED_VM_EXEC_CONTROL, CPU_BASED_MOV_DR_EXITING);
 }
 
 static void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val)
@@ -5682,8 +5792,7 @@ static int handle_halt(struct kvm_vcpu *vcpu)
 
 static int handle_vmcall(struct kvm_vcpu *vcpu)
 {
-	kvm_emulate_hypercall(vcpu);
-	return 1;
+	return kvm_emulate_hypercall(vcpu);
 }
 
 static int handle_invd(struct kvm_vcpu *vcpu)
@@ -5908,7 +6017,7 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu)
 		return 1;
 	}
 
-	ret = handle_mmio_page_fault_common(vcpu, gpa, true);
+	ret = handle_mmio_page_fault(vcpu, gpa, true);
 	if (likely(ret == RET_MMIO_PF_EMULATE))
 		return x86_emulate_instruction(vcpu, gpa, 0, NULL, 0) ==
 					      EMULATE_DONE;
@@ -6199,13 +6308,10 @@ static __init int hardware_setup(void)
 	if (!cpu_has_vmx_apicv())
 		enable_apicv = 0;
 
-	if (enable_apicv)
-		kvm_x86_ops->update_cr8_intercept = NULL;
-	else {
-		kvm_x86_ops->hwapic_irr_update = NULL;
-		kvm_x86_ops->hwapic_isr_update = NULL;
-		kvm_x86_ops->deliver_posted_interrupt = NULL;
-		kvm_x86_ops->sync_pir_to_irr = vmx_sync_pir_to_irr_dummy;
+	if (cpu_has_vmx_tsc_scaling()) {
+		kvm_has_tsc_control = true;
+		kvm_max_tsc_scaling_ratio = KVM_VMX_TSC_MULTIPLIER_MAX;
+		kvm_tsc_scaling_ratio_frac_bits = 48;
 	}
 
 	vmx_disable_intercept_for_msr(MSR_FS_BASE, false);
@@ -6373,8 +6479,8 @@ static struct loaded_vmcs *nested_get_current_vmcs02(struct vcpu_vmx *vmx)
 
 	if (vmx->nested.vmcs02_num >= max(VMCS02_POOL_SIZE, 1)) {
 		/* Recycle the least recently used VMCS. */
-		item = list_entry(vmx->nested.vmcs02_pool.prev,
-			struct vmcs02_list, list);
+		item = list_last_entry(&vmx->nested.vmcs02_pool,
+				       struct vmcs02_list, list);
 		item->vmptr = vmx->nested.current_vmptr;
 		list_move(&item->list, &vmx->nested.vmcs02_pool);
 		return &item->vmcs02;
@@ -7161,7 +7267,7 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu)
 	/* The value to write might be 32 or 64 bits, depending on L1's long
 	 * mode, and eventually we need to write that into a field of several
 	 * possible lengths. The code below first zero-extends the value to 64
-	 * bit (field_value), and then copies only the approriate number of
+	 * bit (field_value), and then copies only the appropriate number of
 	 * bits into the vmcs12 field.
 	 */
 	u64 field_value = 0;
@@ -7315,6 +7421,7 @@ static int handle_invept(struct kvm_vcpu *vcpu)
 	if (!(types & (1UL << type))) {
 		nested_vmx_failValid(vcpu,
 				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
+		skip_emulated_instruction(vcpu);
 		return 1;
 	}
 
@@ -7373,6 +7480,7 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 	if (!(types & (1UL << type))) {
 		nested_vmx_failValid(vcpu,
 			VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
+		skip_emulated_instruction(vcpu);
 		return 1;
 	}
 
@@ -7389,17 +7497,17 @@ static int handle_invvpid(struct kvm_vcpu *vcpu)
 	}
 
 	switch (type) {
+	case VMX_VPID_EXTENT_SINGLE_CONTEXT:
+		/*
+		 * Old versions of KVM use the single-context version so we
+		 * have to support it; just treat it the same as all-context.
+		 */
 	case VMX_VPID_EXTENT_ALL_CONTEXT:
-		if (get_vmcs12(vcpu)->virtual_processor_id == 0) {
-			nested_vmx_failValid(vcpu,
-				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);
-			return 1;
-		}
 		__vmx_flush_tlb(vcpu, to_vmx(vcpu)->nested.vpid02);
 		nested_vmx_succeed(vcpu);
 		break;
 	default:
-		/* Trap single context invalidation invvpid calls */
+		/* Trap individual address invalidation invvpid calls */
 		BUG_ON(1);
 		break;
 	}
@@ -7695,6 +7803,13 @@ static bool nested_vmx_exit_handled(struct kvm_vcpu *vcpu)
 		else if (is_no_device(intr_info) &&
 			 !(vmcs12->guest_cr0 & X86_CR0_TS))
 			return false;
+		else if (is_debug(intr_info) &&
+			 vcpu->guest_debug &
+			 (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
+			return false;
+		else if (is_breakpoint(intr_info) &&
+			 vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
+			return false;
 		return vmcs12->exception_bitmap &
 				(1u << (intr_info & INTR_INFO_VECTOR_MASK));
 	case EXIT_REASON_EXTERNAL_INTERRUPT:
@@ -7902,7 +8017,7 @@ static void dump_vmcs(void)
 	u32 pin_based_exec_ctrl = vmcs_read32(PIN_BASED_VM_EXEC_CONTROL);
 	u32 secondary_exec_control = 0;
 	unsigned long cr4 = vmcs_readl(GUEST_CR4);
-	u64 efer = vmcs_readl(GUEST_IA32_EFER);
+	u64 efer = vmcs_read64(GUEST_IA32_EFER);
 	int i, n;
 
 	if (cpu_has_secondary_exec_ctrls())
@@ -7918,10 +8033,10 @@ static void dump_vmcs(void)
 	if ((secondary_exec_control & SECONDARY_EXEC_ENABLE_EPT) &&
 	    (cr4 & X86_CR4_PAE) && !(efer & EFER_LMA))
 	{
-		pr_err("PDPTR0 = 0x%016lx  PDPTR1 = 0x%016lx\n",
-		       vmcs_readl(GUEST_PDPTR0), vmcs_readl(GUEST_PDPTR1));
-		pr_err("PDPTR2 = 0x%016lx  PDPTR3 = 0x%016lx\n",
-		       vmcs_readl(GUEST_PDPTR2), vmcs_readl(GUEST_PDPTR3));
+		pr_err("PDPTR0 = 0x%016llx  PDPTR1 = 0x%016llx\n",
+		       vmcs_read64(GUEST_PDPTR0), vmcs_read64(GUEST_PDPTR1));
+		pr_err("PDPTR2 = 0x%016llx  PDPTR3 = 0x%016llx\n",
+		       vmcs_read64(GUEST_PDPTR2), vmcs_read64(GUEST_PDPTR3));
 	}
 	pr_err("RSP = 0x%016lx  RIP = 0x%016lx\n",
 	       vmcs_readl(GUEST_RSP), vmcs_readl(GUEST_RIP));
@@ -7942,16 +8057,16 @@ static void dump_vmcs(void)
 	vmx_dump_sel("TR:  ", GUEST_TR_SELECTOR);
 	if ((vmexit_ctl & (VM_EXIT_SAVE_IA32_PAT | VM_EXIT_SAVE_IA32_EFER)) ||
 	    (vmentry_ctl & (VM_ENTRY_LOAD_IA32_PAT | VM_ENTRY_LOAD_IA32_EFER)))
-		pr_err("EFER =     0x%016llx  PAT = 0x%016lx\n",
-		       efer, vmcs_readl(GUEST_IA32_PAT));
-	pr_err("DebugCtl = 0x%016lx  DebugExceptions = 0x%016lx\n",
-	       vmcs_readl(GUEST_IA32_DEBUGCTL),
+		pr_err("EFER =     0x%016llx  PAT = 0x%016llx\n",
+		       efer, vmcs_read64(GUEST_IA32_PAT));
+	pr_err("DebugCtl = 0x%016llx  DebugExceptions = 0x%016lx\n",
+	       vmcs_read64(GUEST_IA32_DEBUGCTL),
 	       vmcs_readl(GUEST_PENDING_DBG_EXCEPTIONS));
 	if (vmentry_ctl & VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL)
-		pr_err("PerfGlobCtl = 0x%016lx\n",
-		       vmcs_readl(GUEST_IA32_PERF_GLOBAL_CTRL));
+		pr_err("PerfGlobCtl = 0x%016llx\n",
+		       vmcs_read64(GUEST_IA32_PERF_GLOBAL_CTRL));
 	if (vmentry_ctl & VM_ENTRY_LOAD_BNDCFGS)
-		pr_err("BndCfgS = 0x%016lx\n", vmcs_readl(GUEST_BNDCFGS));
+		pr_err("BndCfgS = 0x%016llx\n", vmcs_read64(GUEST_BNDCFGS));
 	pr_err("Interruptibility = %08x  ActivityState = %08x\n",
 	       vmcs_read32(GUEST_INTERRUPTIBILITY_INFO),
 	       vmcs_read32(GUEST_ACTIVITY_STATE));
@@ -7980,11 +8095,12 @@ static void dump_vmcs(void)
 	       vmcs_read32(HOST_IA32_SYSENTER_CS),
 	       vmcs_readl(HOST_IA32_SYSENTER_EIP));
 	if (vmexit_ctl & (VM_EXIT_LOAD_IA32_PAT | VM_EXIT_LOAD_IA32_EFER))
-		pr_err("EFER = 0x%016lx  PAT = 0x%016lx\n",
-		       vmcs_readl(HOST_IA32_EFER), vmcs_readl(HOST_IA32_PAT));
+		pr_err("EFER = 0x%016llx  PAT = 0x%016llx\n",
+		       vmcs_read64(HOST_IA32_EFER),
+		       vmcs_read64(HOST_IA32_PAT));
 	if (vmexit_ctl & VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL)
-		pr_err("PerfGlobCtl = 0x%016lx\n",
-		       vmcs_readl(HOST_IA32_PERF_GLOBAL_CTRL));
+		pr_err("PerfGlobCtl = 0x%016llx\n",
+		       vmcs_read64(HOST_IA32_PERF_GLOBAL_CTRL));
 
 	pr_err("*** Control State ***\n");
 	pr_err("PinBased=%08x CPUBased=%08x SecondaryExec=%08x\n",
@@ -8007,13 +8123,16 @@ static void dump_vmcs(void)
 	pr_err("IDTVectoring: info=%08x errcode=%08x\n",
 	       vmcs_read32(IDT_VECTORING_INFO_FIELD),
 	       vmcs_read32(IDT_VECTORING_ERROR_CODE));
-	pr_err("TSC Offset = 0x%016lx\n", vmcs_readl(TSC_OFFSET));
+	pr_err("TSC Offset = 0x%016llx\n", vmcs_read64(TSC_OFFSET));
+	if (secondary_exec_control & SECONDARY_EXEC_TSC_SCALING)
+		pr_err("TSC Multiplier = 0x%016llx\n",
+		       vmcs_read64(TSC_MULTIPLIER));
 	if (cpu_based_exec_ctrl & CPU_BASED_TPR_SHADOW)
 		pr_err("TPR Threshold = 0x%02x\n", vmcs_read32(TPR_THRESHOLD));
 	if (pin_based_exec_ctrl & PIN_BASED_POSTED_INTR)
 		pr_err("PostedIntrVec = 0x%02x\n", vmcs_read16(POSTED_INTR_NV));
 	if ((secondary_exec_control & SECONDARY_EXEC_ENABLE_EPT))
-		pr_err("EPT pointer = 0x%016lx\n", vmcs_readl(EPT_POINTER));
+		pr_err("EPT pointer = 0x%016llx\n", vmcs_read64(EPT_POINTER));
 	n = vmcs_read32(CR3_TARGET_COUNT);
 	for (i = 0; i + 1 < n; i += 4)
 		pr_err("CR3 target%u=%016lx target%u=%016lx\n",
@@ -8040,6 +8159,8 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 	u32 exit_reason = vmx->exit_reason;
 	u32 vectoring_info = vmx->idt_vectoring_info;
 
+	trace_kvm_exit(exit_reason, vcpu, KVM_ISA_VMX);
+
 	/*
 	 * Flush logged GPAs PML buffer, this will make dirty_bitmap more
 	 * updated. Another good is, in kvm_vm_ioctl_get_dirty_log, before
@@ -8150,7 +8271,7 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
 	 * apicv
 	 */
 	if (!cpu_has_vmx_virtualize_x2apic_mode() ||
-				!vmx_cpu_uses_apicv(vcpu))
+				!kvm_vcpu_apicv_active(vcpu))
 		return;
 
 	if (!cpu_need_tpr_shadow(vcpu))
@@ -8255,10 +8376,9 @@ static void vmx_hwapic_irr_update(struct kvm_vcpu *vcpu, int max_irr)
 	}
 }
 
-static void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu)
+static void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
 {
-	u64 *eoi_exit_bitmap = vcpu->arch.eoi_exit_bitmap;
-	if (!vmx_cpu_uses_apicv(vcpu))
+	if (!kvm_vcpu_apicv_active(vcpu))
 		return;
 
 	vmcs_write64(EOI_EXIT_BITMAP0, eoi_exit_bitmap[0]);
@@ -8294,6 +8414,7 @@ static void vmx_complete_atomic_exit(struct vcpu_vmx *vmx)
 static void vmx_handle_external_intr(struct kvm_vcpu *vcpu)
 {
 	u32 exit_intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
+	register void *__sp asm(_ASM_SP);
 
 	/*
 	 * If external interrupt exists, IF bit is set in rflags/eflags on the
@@ -8326,8 +8447,9 @@ static void vmx_handle_external_intr(struct kvm_vcpu *vcpu)
 			"call *%[entry]\n\t"
 			:
 #ifdef CONFIG_X86_64
-			[sp]"=&r"(tmp)
+			[sp]"=&r"(tmp),
 #endif
+			"+r"(__sp)
 			:
 			[entry]"r"(entry),
 			[ss]"i"(__KERNEL_DS),
@@ -8528,6 +8650,9 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
 		vmx_set_interrupt_shadow(vcpu, 0);
 
+	if (vmx->guest_pkru_valid)
+		__write_pkru(vmx->guest_pkru);
+
 	atomic_switch_perf_msrs(vmx);
 	debugctlmsr = get_debugctlmsr();
 
@@ -8666,7 +8791,20 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	vmx->loaded_vmcs->launched = 1;
 
 	vmx->exit_reason = vmcs_read32(VM_EXIT_REASON);
-	trace_kvm_exit(vmx->exit_reason, vcpu, KVM_ISA_VMX);
+
+	/*
+	 * eager fpu is enabled if PKEY is supported and CR4 is switched
+	 * back on host, so it is safe to read guest PKRU from current
+	 * XSAVE.
+	 */
+	if (boot_cpu_has(X86_FEATURE_OSPKE)) {
+		vmx->guest_pkru = __read_pkru();
+		if (vmx->guest_pkru != vmx->host_pkru) {
+			vmx->guest_pkru_valid = true;
+			__write_pkru(vmx->host_pkru);
+		} else
+			vmx->guest_pkru_valid = false;
+	}
 
 	/*
 	 * the KVM_REQ_EVENT optimization bit is only on for one entry, and if
@@ -8929,7 +9067,8 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 			best->ebx &= ~bit(X86_FEATURE_INVPCID);
 	}
 
-	vmcs_set_secondary_exec_control(secondary_exec_ctl);
+	if (cpu_has_secondary_exec_ctrls())
+		vmcs_set_secondary_exec_control(secondary_exec_ctl);
 
 	if (static_cpu_has(X86_FEATURE_PCOMMIT) && nested) {
 		if (guest_cpuid_has_pcommit(vcpu))
@@ -9505,7 +9644,7 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12)
 		 */
 		vmx->nested.posted_intr_nv = vmcs12->posted_intr_nv;
 		vmx->nested.pi_pending = false;
-		vmcs_write64(POSTED_INTR_NV, POSTED_INTR_VECTOR);
+		vmcs_write16(POSTED_INTR_NV, POSTED_INTR_VECTOR);
 		vmcs_write64(POSTED_INTR_DESC_ADDR,
 			page_to_phys(vmx->nested.pi_desc_page) +
 			(unsigned long)(vmcs12->posted_intr_desc_addr &
@@ -10166,7 +10305,7 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	 * Additionally, restore L2's PDPTR to vmcs12.
 	 */
 	if (enable_ept) {
-		vmcs12->guest_cr3 = vmcs_read64(GUEST_CR3);
+		vmcs12->guest_cr3 = vmcs_readl(GUEST_CR3);
 		vmcs12->guest_pdptr0 = vmcs_read64(GUEST_PDPTR0);
 		vmcs12->guest_pdptr1 = vmcs_read64(GUEST_PDPTR1);
 		vmcs12->guest_pdptr2 = vmcs_read64(GUEST_PDPTR2);
@@ -10194,7 +10333,7 @@ static void prepare_vmcs12(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	vmcs12->guest_sysenter_cs = vmcs_read32(GUEST_SYSENTER_CS);
 	vmcs12->guest_sysenter_esp = vmcs_readl(GUEST_SYSENTER_ESP);
 	vmcs12->guest_sysenter_eip = vmcs_readl(GUEST_SYSENTER_EIP);
-	if (vmx_mpx_supported())
+	if (kvm_mpx_supported())
 		vmcs12->guest_bndcfgs = vmcs_read64(GUEST_BNDCFGS);
 	if (nested_cpu_has_xsaves(vmcs12))
 		vmcs12->xss_exit_bitmap = vmcs_read64(XSS_EXIT_BITMAP);
@@ -10702,13 +10841,26 @@ static int vmx_update_pi_irte(struct kvm *kvm, unsigned int host_irq,
 		 */
 
 		kvm_set_msi_irq(e, &irq);
-		if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu))
+		if (!kvm_intr_is_single_vcpu(kvm, &irq, &vcpu)) {
+			/*
+			 * Make sure the IRTE is in remapped mode if
+			 * we don't handle it in posted mode.
+			 */
+			ret = irq_set_vcpu_affinity(host_irq, NULL);
+			if (ret < 0) {
+				printk(KERN_INFO
+				   "failed to back to remapped mode, irq: %u\n",
+				   host_irq);
+				goto out;
+			}
+
 			continue;
+		}
 
 		vcpu_info.pi_desc_addr = __pa(vcpu_to_pi_desc(vcpu));
 		vcpu_info.vector = irq.vector;
 
-		trace_kvm_pi_irte_update(vcpu->vcpu_id, e->gsi,
+		trace_kvm_pi_irte_update(vcpu->vcpu_id, host_irq, e->gsi,
 				vcpu_info.vector, vcpu_info.pi_desc_addr, set);
 
 		if (set)
@@ -10752,7 +10904,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.vcpu_load = vmx_vcpu_load,
 	.vcpu_put = vmx_vcpu_put,
 
-	.update_db_bp_intercept = update_exception_bitmap,
+	.update_bp_intercept = update_exception_bitmap,
 	.get_msr = vmx_get_msr,
 	.set_msr = vmx_set_msr,
 	.get_segment_base = vmx_get_segment_base,
@@ -10778,6 +10930,9 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.cache_reg = vmx_cache_reg,
 	.get_rflags = vmx_get_rflags,
 	.set_rflags = vmx_set_rflags,
+
+	.get_pkru = vmx_get_pkru,
+
 	.fpu_activate = vmx_fpu_activate,
 	.fpu_deactivate = vmx_fpu_deactivate,
 
@@ -10802,7 +10957,8 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.update_cr8_intercept = update_cr8_intercept,
 	.set_virtual_x2apic_mode = vmx_set_virtual_x2apic_mode,
 	.set_apic_access_page_addr = vmx_set_apic_access_page_addr,
-	.cpu_uses_apicv = vmx_cpu_uses_apicv,
+	.get_enable_apicv = vmx_get_enable_apicv,
+	.refresh_apicv_exec_ctrl = vmx_refresh_apicv_exec_ctrl,
 	.load_eoi_exitmap = vmx_load_eoi_exitmap,
 	.hwapic_irr_update = vmx_hwapic_irr_update,
 	.hwapic_isr_update = vmx_hwapic_isr_update,
@@ -10826,11 +10982,9 @@ static struct kvm_x86_ops vmx_x86_ops = {
 
 	.has_wbinvd_exit = cpu_has_vmx_wbinvd_exit,
 
-	.set_tsc_khz = vmx_set_tsc_khz,
 	.read_tsc_offset = vmx_read_tsc_offset,
 	.write_tsc_offset = vmx_write_tsc_offset,
-	.adjust_tsc_offset = vmx_adjust_tsc_offset,
-	.compute_tsc_offset = vmx_compute_tsc_offset,
+	.adjust_tsc_offset_guest = vmx_adjust_tsc_offset_guest,
 	.read_l1_tsc = vmx_read_l1_tsc,
 
 	.set_tdp_cr3 = vmx_set_cr3,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 4a6eff166fc6..9b7798c7b210 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -93,10 +93,10 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu);
 static void process_nmi(struct kvm_vcpu *vcpu);
 static void __kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
 
-struct kvm_x86_ops *kvm_x86_ops;
+struct kvm_x86_ops *kvm_x86_ops __read_mostly;
 EXPORT_SYMBOL_GPL(kvm_x86_ops);
 
-static bool ignore_msrs = 0;
+static bool __read_mostly ignore_msrs = 0;
 module_param(ignore_msrs, bool, S_IRUGO | S_IWUSR);
 
 unsigned int min_timer_period_us = 500;
@@ -105,20 +105,28 @@ module_param(min_timer_period_us, uint, S_IRUGO | S_IWUSR);
 static bool __read_mostly kvmclock_periodic_sync = true;
 module_param(kvmclock_periodic_sync, bool, S_IRUGO);
 
-bool kvm_has_tsc_control;
+bool __read_mostly kvm_has_tsc_control;
 EXPORT_SYMBOL_GPL(kvm_has_tsc_control);
-u32  kvm_max_guest_tsc_khz;
+u32  __read_mostly kvm_max_guest_tsc_khz;
 EXPORT_SYMBOL_GPL(kvm_max_guest_tsc_khz);
+u8   __read_mostly kvm_tsc_scaling_ratio_frac_bits;
+EXPORT_SYMBOL_GPL(kvm_tsc_scaling_ratio_frac_bits);
+u64  __read_mostly kvm_max_tsc_scaling_ratio;
+EXPORT_SYMBOL_GPL(kvm_max_tsc_scaling_ratio);
+static u64 __read_mostly kvm_default_tsc_scaling_ratio;
 
 /* tsc tolerance in parts per million - default to 1/2 of the NTP threshold */
-static u32 tsc_tolerance_ppm = 250;
+static u32 __read_mostly tsc_tolerance_ppm = 250;
 module_param(tsc_tolerance_ppm, uint, S_IRUGO | S_IWUSR);
 
 /* lapic timer advance (tscdeadline mode only) in nanoseconds */
-unsigned int lapic_timer_advance_ns = 0;
+unsigned int __read_mostly lapic_timer_advance_ns = 0;
 module_param(lapic_timer_advance_ns, uint, S_IRUGO | S_IWUSR);
 
-static bool backwards_tsc_observed = false;
+static bool __read_mostly vector_hashing = true;
+module_param(vector_hashing, bool, S_IRUGO);
+
+static bool __read_mostly backwards_tsc_observed = false;
 
 #define KVM_NR_SHARED_MSRS 16
 
@@ -692,7 +700,6 @@ static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 		if ((xcr0 & XFEATURE_MASK_AVX512) != XFEATURE_MASK_AVX512)
 			return 1;
 	}
-	kvm_put_guest_xcr0(vcpu);
 	vcpu->arch.xcr0 = xcr0;
 
 	if ((xcr0 ^ old_xcr0) & XFEATURE_MASK_EXTEND)
@@ -715,7 +722,7 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
 	unsigned long old_cr4 = kvm_read_cr4(vcpu);
 	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE |
-				   X86_CR4_SMEP | X86_CR4_SMAP;
+				   X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE;
 
 	if (cr4 & CR4_RESERVED_BITS)
 		return 1;
@@ -732,6 +739,9 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 	if (!guest_cpuid_has_fsgsbase(vcpu) && (cr4 & X86_CR4_FSGSBASE))
 		return 1;
 
+	if (!guest_cpuid_has_pku(vcpu) && (cr4 & X86_CR4_PKE))
+		return 1;
+
 	if (is_long_mode(vcpu)) {
 		if (!(cr4 & X86_CR4_PAE))
 			return 1;
@@ -757,7 +767,7 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 	    (!(cr4 & X86_CR4_PCIDE) && (old_cr4 & X86_CR4_PCIDE)))
 		kvm_mmu_reset_context(vcpu);
 
-	if ((cr4 ^ old_cr4) & X86_CR4_OSXSAVE)
+	if ((cr4 ^ old_cr4) & (X86_CR4_OSXSAVE | X86_CR4_PKE))
 		kvm_update_cpuid(vcpu);
 
 	return 0;
@@ -946,7 +956,7 @@ static u32 msrs_to_save[] = {
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
 	MSR_IA32_TSC, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA,
-	MSR_IA32_FEATURE_CONTROL, MSR_IA32_BNDCFGS
+	MSR_IA32_FEATURE_CONTROL, MSR_IA32_BNDCFGS, MSR_TSC_AUX,
 };
 
 static unsigned num_msrs_to_save;
@@ -961,6 +971,8 @@ static u32 emulated_msrs[] = {
 	HV_X64_MSR_RESET,
 	HV_X64_MSR_VP_INDEX,
 	HV_X64_MSR_VP_RUNTIME,
+	HV_X64_MSR_SCONTROL,
+	HV_X64_MSR_STIMER0_CONFIG,
 	HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
 	MSR_KVM_PV_EOI_EN,
 
@@ -1162,7 +1174,8 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
 
 	++version;
 
-	kvm_write_guest(kvm, wall_clock, &version, sizeof(version));
+	if (kvm_write_guest(kvm, wall_clock, &version, sizeof(version)))
+		return;
 
 	/*
 	 * The guest calculates current wall clock time by adding
@@ -1188,17 +1201,11 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock)
 
 static uint32_t div_frac(uint32_t dividend, uint32_t divisor)
 {
-	uint32_t quotient, remainder;
-
-	/* Don't try to replace with do_div(), this one calculates
-	 * "(dividend << 32) / divisor" */
-	__asm__ ( "divl %4"
-		  : "=a" (quotient), "=d" (remainder)
-		  : "0" (0), "1" (dividend), "r" (divisor) );
-	return quotient;
+	do_shl32_div32(dividend, divisor);
+	return dividend;
 }
 
-static void kvm_get_time_scale(uint32_t scaled_khz, uint32_t base_khz,
+static void kvm_get_time_scale(uint64_t scaled_hz, uint64_t base_hz,
 			       s8 *pshift, u32 *pmultiplier)
 {
 	uint64_t scaled64;
@@ -1206,8 +1213,8 @@ static void kvm_get_time_scale(uint32_t scaled_khz, uint32_t base_khz,
 	uint64_t tps64;
 	uint32_t tps32;
 
-	tps64 = base_khz * 1000LL;
-	scaled64 = scaled_khz * 1000LL;
+	tps64 = base_hz;
+	scaled64 = scaled_hz;
 	while (tps64 > scaled64*2 || tps64 & 0xffffffff00000000ULL) {
 		tps64 >>= 1;
 		shift--;
@@ -1225,8 +1232,8 @@ static void kvm_get_time_scale(uint32_t scaled_khz, uint32_t base_khz,
 	*pshift = shift;
 	*pmultiplier = div_frac(scaled64, tps32);
 
-	pr_debug("%s: base_khz %u => %u, shift %d, mul %u\n",
-		 __func__, base_khz, scaled_khz, shift, *pmultiplier);
+	pr_debug("%s: base_hz %llu => %llu, shift %d, mul %u\n",
+		 __func__, base_hz, scaled_hz, shift, *pmultiplier);
 }
 
 #ifdef CONFIG_X86_64
@@ -1249,20 +1256,59 @@ static u32 adjust_tsc_khz(u32 khz, s32 ppm)
 	return v;
 }
 
-static void kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 this_tsc_khz)
+static int set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz, bool scale)
+{
+	u64 ratio;
+
+	/* Guest TSC same frequency as host TSC? */
+	if (!scale) {
+		vcpu->arch.tsc_scaling_ratio = kvm_default_tsc_scaling_ratio;
+		return 0;
+	}
+
+	/* TSC scaling supported? */
+	if (!kvm_has_tsc_control) {
+		if (user_tsc_khz > tsc_khz) {
+			vcpu->arch.tsc_catchup = 1;
+			vcpu->arch.tsc_always_catchup = 1;
+			return 0;
+		} else {
+			WARN(1, "user requested TSC rate below hardware speed\n");
+			return -1;
+		}
+	}
+
+	/* TSC scaling required  - calculate ratio */
+	ratio = mul_u64_u32_div(1ULL << kvm_tsc_scaling_ratio_frac_bits,
+				user_tsc_khz, tsc_khz);
+
+	if (ratio == 0 || ratio >= kvm_max_tsc_scaling_ratio) {
+		WARN_ONCE(1, "Invalid TSC scaling ratio - virtual-tsc-khz=%u\n",
+			  user_tsc_khz);
+		return -1;
+	}
+
+	vcpu->arch.tsc_scaling_ratio = ratio;
+	return 0;
+}
+
+static int kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 user_tsc_khz)
 {
 	u32 thresh_lo, thresh_hi;
 	int use_scaling = 0;
 
 	/* tsc_khz can be zero if TSC calibration fails */
-	if (this_tsc_khz == 0)
-		return;
+	if (user_tsc_khz == 0) {
+		/* set tsc_scaling_ratio to a safe value */
+		vcpu->arch.tsc_scaling_ratio = kvm_default_tsc_scaling_ratio;
+		return -1;
+	}
 
 	/* Compute a scale to convert nanoseconds in TSC cycles */
-	kvm_get_time_scale(this_tsc_khz, NSEC_PER_SEC / 1000,
+	kvm_get_time_scale(user_tsc_khz * 1000LL, NSEC_PER_SEC,
 			   &vcpu->arch.virtual_tsc_shift,
 			   &vcpu->arch.virtual_tsc_mult);
-	vcpu->arch.virtual_tsc_khz = this_tsc_khz;
+	vcpu->arch.virtual_tsc_khz = user_tsc_khz;
 
 	/*
 	 * Compute the variation in TSC rate which is acceptable
@@ -1272,11 +1318,11 @@ static void kvm_set_tsc_khz(struct kvm_vcpu *vcpu, u32 this_tsc_khz)
 	 */
 	thresh_lo = adjust_tsc_khz(tsc_khz, -tsc_tolerance_ppm);
 	thresh_hi = adjust_tsc_khz(tsc_khz, tsc_tolerance_ppm);
-	if (this_tsc_khz < thresh_lo || this_tsc_khz > thresh_hi) {
-		pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", this_tsc_khz, thresh_lo, thresh_hi);
+	if (user_tsc_khz < thresh_lo || user_tsc_khz > thresh_hi) {
+		pr_debug("kvm: requested TSC rate %u falls outside tolerance [%u,%u]\n", user_tsc_khz, thresh_lo, thresh_hi);
 		use_scaling = 1;
 	}
-	kvm_x86_ops->set_tsc_khz(vcpu, this_tsc_khz, use_scaling);
+	return set_tsc_khz(vcpu, user_tsc_khz, use_scaling);
 }
 
 static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
@@ -1322,6 +1368,48 @@ static void update_ia32_tsc_adjust_msr(struct kvm_vcpu *vcpu, s64 offset)
 	vcpu->arch.ia32_tsc_adjust_msr += offset - curr_offset;
 }
 
+/*
+ * Multiply tsc by a fixed point number represented by ratio.
+ *
+ * The most significant 64-N bits (mult) of ratio represent the
+ * integral part of the fixed point number; the remaining N bits
+ * (frac) represent the fractional part, ie. ratio represents a fixed
+ * point number (mult + frac * 2^(-N)).
+ *
+ * N equals to kvm_tsc_scaling_ratio_frac_bits.
+ */
+static inline u64 __scale_tsc(u64 ratio, u64 tsc)
+{
+	return mul_u64_u64_shr(tsc, ratio, kvm_tsc_scaling_ratio_frac_bits);
+}
+
+u64 kvm_scale_tsc(struct kvm_vcpu *vcpu, u64 tsc)
+{
+	u64 _tsc = tsc;
+	u64 ratio = vcpu->arch.tsc_scaling_ratio;
+
+	if (ratio != kvm_default_tsc_scaling_ratio)
+		_tsc = __scale_tsc(ratio, tsc);
+
+	return _tsc;
+}
+EXPORT_SYMBOL_GPL(kvm_scale_tsc);
+
+static u64 kvm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)
+{
+	u64 tsc;
+
+	tsc = kvm_scale_tsc(vcpu, rdtsc());
+
+	return target_tsc - tsc;
+}
+
+u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc)
+{
+	return kvm_x86_ops->read_l1_tsc(vcpu, kvm_scale_tsc(vcpu, host_tsc));
+}
+EXPORT_SYMBOL_GPL(kvm_read_l1_tsc);
+
 void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 {
 	struct kvm *kvm = vcpu->kvm;
@@ -1333,7 +1421,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 	u64 data = msr->data;
 
 	raw_spin_lock_irqsave(&kvm->arch.tsc_write_lock, flags);
-	offset = kvm_x86_ops->compute_tsc_offset(vcpu, data);
+	offset = kvm_compute_tsc_offset(vcpu, data);
 	ns = get_kernel_ns();
 	elapsed = ns - kvm->arch.last_tsc_nsec;
 
@@ -1390,7 +1478,7 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 		} else {
 			u64 delta = nsec_to_cycles(vcpu, elapsed);
 			data += delta;
-			offset = kvm_x86_ops->compute_tsc_offset(vcpu, data);
+			offset = kvm_compute_tsc_offset(vcpu, data);
 			pr_debug("kvm: adjusted tsc offset by %llu\n", delta);
 		}
 		matched = true;
@@ -1447,6 +1535,20 @@ void kvm_write_tsc(struct kvm_vcpu *vcpu, struct msr_data *msr)
 
 EXPORT_SYMBOL_GPL(kvm_write_tsc);
 
+static inline void adjust_tsc_offset_guest(struct kvm_vcpu *vcpu,
+					   s64 adjustment)
+{
+	kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment);
+}
+
+static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment)
+{
+	if (vcpu->arch.tsc_scaling_ratio != kvm_default_tsc_scaling_ratio)
+		WARN_ON(adjustment < 0);
+	adjustment = kvm_scale_tsc(vcpu, (u64) adjustment);
+	kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment);
+}
+
 #ifdef CONFIG_X86_64
 
 static cycle_t read_tsc(void)
@@ -1459,7 +1561,7 @@ static cycle_t read_tsc(void)
 
 	/*
 	 * GCC likes to generate cmov here, but this branch is extremely
-	 * predictable (it's just a funciton of time and the likely is
+	 * predictable (it's just a function of time and the likely is
 	 * very likely) and there's a data dependence, so force GCC
 	 * to generate a branch instead.  I don't barrier() because
 	 * we don't actually need a barrier, and if this function
@@ -1583,6 +1685,11 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm)
 #endif
 }
 
+void kvm_make_mclock_inprogress_request(struct kvm *kvm)
+{
+	kvm_make_all_cpus_request(kvm, KVM_REQ_MCLOCK_INPROGRESS);
+}
+
 static void kvm_gen_update_masterclock(struct kvm *kvm)
 {
 #ifdef CONFIG_X86_64
@@ -1608,7 +1715,7 @@ static void kvm_gen_update_masterclock(struct kvm *kvm)
 
 static int kvm_guest_time_update(struct kvm_vcpu *v)
 {
-	unsigned long flags, this_tsc_khz;
+	unsigned long flags, tgt_tsc_khz;
 	struct kvm_vcpu_arch *vcpu = &v->arch;
 	struct kvm_arch *ka = &v->kvm->arch;
 	s64 kernel_ns;
@@ -1634,8 +1741,8 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 
 	/* Keep irq disabled to prevent changes to the clock */
 	local_irq_save(flags);
-	this_tsc_khz = __this_cpu_read(cpu_tsc_khz);
-	if (unlikely(this_tsc_khz == 0)) {
+	tgt_tsc_khz = __this_cpu_read(cpu_tsc_khz);
+	if (unlikely(tgt_tsc_khz == 0)) {
 		local_irq_restore(flags);
 		kvm_make_request(KVM_REQ_CLOCK_UPDATE, v);
 		return 1;
@@ -1645,7 +1752,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 		kernel_ns = get_kernel_ns();
 	}
 
-	tsc_timestamp = kvm_x86_ops->read_l1_tsc(v, host_tsc);
+	tsc_timestamp = kvm_read_l1_tsc(v, host_tsc);
 
 	/*
 	 * We may have to catch up the TSC to match elapsed wall clock
@@ -1670,11 +1777,14 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	if (!vcpu->pv_time_enabled)
 		return 0;
 
-	if (unlikely(vcpu->hw_tsc_khz != this_tsc_khz)) {
-		kvm_get_time_scale(NSEC_PER_SEC / 1000, this_tsc_khz,
+	if (kvm_has_tsc_control)
+		tgt_tsc_khz = kvm_scale_tsc(v, tgt_tsc_khz);
+
+	if (unlikely(vcpu->hw_tsc_khz != tgt_tsc_khz)) {
+		kvm_get_time_scale(NSEC_PER_SEC, tgt_tsc_khz * 1000LL,
 				   &vcpu->hv_clock.tsc_shift,
 				   &vcpu->hv_clock.tsc_to_system_mul);
-		vcpu->hw_tsc_khz = this_tsc_khz;
+		vcpu->hw_tsc_khz = tgt_tsc_khz;
 	}
 
 	/* With all the info we got, fill in the values */
@@ -2096,6 +2206,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case HV_X64_MSR_GUEST_OS_ID ... HV_X64_MSR_SINT15:
 	case HV_X64_MSR_CRASH_P0 ... HV_X64_MSR_CRASH_P4:
 	case HV_X64_MSR_CRASH_CTL:
+	case HV_X64_MSR_STIMER0_CONFIG ... HV_X64_MSR_STIMER3_COUNT:
 		return kvm_hv_set_msr_common(vcpu, msr, data,
 					     msr_info->host_initiated);
 	case MSR_IA32_BBL_CR_CTL3:
@@ -2300,6 +2411,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case HV_X64_MSR_GUEST_OS_ID ... HV_X64_MSR_SINT15:
 	case HV_X64_MSR_CRASH_P0 ... HV_X64_MSR_CRASH_P4:
 	case HV_X64_MSR_CRASH_CTL:
+	case HV_X64_MSR_STIMER0_CONFIG ... HV_X64_MSR_STIMER3_COUNT:
 		return kvm_hv_get_msr_common(vcpu,
 					     msr_info->index, &msr_info->data);
 		break;
@@ -2439,6 +2551,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_HYPERV:
 	case KVM_CAP_HYPERV_VAPIC:
 	case KVM_CAP_HYPERV_SPIN:
+	case KVM_CAP_HYPERV_SYNIC:
 	case KVM_CAP_PCI_SEGMENT:
 	case KVM_CAP_DEBUGREGS:
 	case KVM_CAP_X86_ROBUST_SINGLESTEP:
@@ -2591,6 +2704,11 @@ static bool need_emulate_wbinvd(struct kvm_vcpu *vcpu)
 	return kvm_arch_has_noncoherent_dma(vcpu->kvm);
 }
 
+static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu)
+{
+	set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests);
+}
+
 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 	/* Address WBINVD may be executed by guest */
@@ -2617,7 +2735,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		if (tsc_delta < 0)
 			mark_tsc_unstable("KVM discovered backwards TSC");
 		if (check_tsc_unstable()) {
-			u64 offset = kvm_x86_ops->compute_tsc_offset(vcpu,
+			u64 offset = kvm_compute_tsc_offset(vcpu,
 						vcpu->arch.last_guest_tsc);
 			kvm_x86_ops->write_tsc_offset(vcpu, offset);
 			vcpu->arch.tsc_catchup = 1;
@@ -2646,7 +2764,9 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 static int kvm_vcpu_ioctl_get_lapic(struct kvm_vcpu *vcpu,
 				    struct kvm_lapic_state *s)
 {
-	kvm_x86_ops->sync_pir_to_irr(vcpu);
+	if (vcpu->arch.apicv_active)
+		kvm_x86_ops->sync_pir_to_irr(vcpu);
+
 	memcpy(s->regs, vcpu->arch.apic->regs, sizeof *s);
 
 	return 0;
@@ -2661,6 +2781,26 @@ static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static int kvm_cpu_accept_dm_intr(struct kvm_vcpu *vcpu)
+{
+	return (!lapic_in_kernel(vcpu) ||
+		kvm_apic_accept_pic_intr(vcpu));
+}
+
+/*
+ * if userspace requested an interrupt window, check that the
+ * interrupt window is open.
+ *
+ * No need to exit to userspace if we already have an interrupt queued.
+ */
+static int kvm_vcpu_ready_for_interrupt_injection(struct kvm_vcpu *vcpu)
+{
+	return kvm_arch_interrupt_allowed(vcpu) &&
+		!kvm_cpu_has_interrupt(vcpu) &&
+		!kvm_event_needs_reinjection(vcpu) &&
+		kvm_cpu_accept_dm_intr(vcpu);
+}
+
 static int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 				    struct kvm_interrupt *irq)
 {
@@ -2684,6 +2824,7 @@ static int kvm_vcpu_ioctl_interrupt(struct kvm_vcpu *vcpu,
 		return -EEXIST;
 
 	vcpu->arch.pending_external_vector = irq->irq;
+	kvm_make_request(KVM_REQ_EVENT, vcpu);
 	return 0;
 }
 
@@ -2846,7 +2987,7 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 	kvm_x86_ops->set_nmi_mask(vcpu, events->nmi.masked);
 
 	if (events->flags & KVM_VCPUEVENT_VALID_SIPI_VECTOR &&
-	    kvm_vcpu_has_lapic(vcpu))
+	    lapic_in_kernel(vcpu))
 		vcpu->arch.apic->sipi_vector = events->sipi_vector;
 
 	if (events->flags & KVM_VCPUEVENT_VALID_SMM) {
@@ -2859,7 +3000,7 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 			vcpu->arch.hflags |= HF_SMM_INSIDE_NMI_MASK;
 		else
 			vcpu->arch.hflags &= ~HF_SMM_INSIDE_NMI_MASK;
-		if (kvm_vcpu_has_lapic(vcpu)) {
+		if (lapic_in_kernel(vcpu)) {
 			if (events->smi.latched_init)
 				set_bit(KVM_APIC_INIT, &vcpu->arch.apic->pending_events);
 			else
@@ -3068,6 +3209,20 @@ static int kvm_set_guest_paused(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
+				     struct kvm_enable_cap *cap)
+{
+	if (cap->flags)
+		return -EINVAL;
+
+	switch (cap->cap) {
+	case KVM_CAP_HYPERV_SYNIC:
+		return kvm_hv_activate_synic(vcpu);
+	default:
+		return -EINVAL;
+	}
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
@@ -3085,7 +3240,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	switch (ioctl) {
 	case KVM_GET_LAPIC: {
 		r = -EINVAL;
-		if (!vcpu->arch.apic)
+		if (!lapic_in_kernel(vcpu))
 			goto out;
 		u.lapic = kzalloc(sizeof(struct kvm_lapic_state), GFP_KERNEL);
 
@@ -3103,7 +3258,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	}
 	case KVM_SET_LAPIC: {
 		r = -EINVAL;
-		if (!vcpu->arch.apic)
+		if (!lapic_in_kernel(vcpu))
 			goto out;
 		u.lapic = memdup_user(argp, sizeof(*u.lapic));
 		if (IS_ERR(u.lapic))
@@ -3319,9 +3474,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		if (user_tsc_khz == 0)
 			user_tsc_khz = tsc_khz;
 
-		kvm_set_tsc_khz(vcpu, user_tsc_khz);
+		if (!kvm_set_tsc_khz(vcpu, user_tsc_khz))
+			r = 0;
 
-		r = 0;
 		goto out;
 	}
 	case KVM_GET_TSC_KHZ: {
@@ -3332,6 +3487,15 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = kvm_set_guest_paused(vcpu);
 		goto out;
 	}
+	case KVM_ENABLE_CAP: {
+		struct kvm_enable_cap cap;
+
+		r = -EFAULT;
+		if (copy_from_user(&cap, argp, sizeof(cap)))
+			goto out;
+		r = kvm_vcpu_ioctl_enable_cap(vcpu, &cap);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -3441,18 +3605,26 @@ static int kvm_vm_ioctl_set_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 
 static int kvm_vm_ioctl_get_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
-	mutex_lock(&kvm->arch.vpit->pit_state.lock);
-	memcpy(ps, &kvm->arch.vpit->pit_state, sizeof(struct kvm_pit_state));
-	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	struct kvm_kpit_state *kps = &kvm->arch.vpit->pit_state;
+
+	BUILD_BUG_ON(sizeof(*ps) != sizeof(kps->channels));
+
+	mutex_lock(&kps->lock);
+	memcpy(ps, &kps->channels, sizeof(*ps));
+	mutex_unlock(&kps->lock);
 	return 0;
 }
 
 static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
-	mutex_lock(&kvm->arch.vpit->pit_state.lock);
-	memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
-	kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0);
-	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	int i;
+	struct kvm_pit *pit = kvm->arch.vpit;
+
+	mutex_lock(&pit->pit_state.lock);
+	memcpy(&pit->pit_state.channels, ps, sizeof(*ps));
+	for (i = 0; i < 3; i++)
+		kvm_pit_load_count(pit, i, ps->channels[i].count, 0);
+	mutex_unlock(&pit->pit_state.lock);
 	return 0;
 }
 
@@ -3470,28 +3642,41 @@ static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
 static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
 {
 	int start = 0;
+	int i;
 	u32 prev_legacy, cur_legacy;
-	mutex_lock(&kvm->arch.vpit->pit_state.lock);
-	prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY;
+	struct kvm_pit *pit = kvm->arch.vpit;
+
+	mutex_lock(&pit->pit_state.lock);
+	prev_legacy = pit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY;
 	cur_legacy = ps->flags & KVM_PIT_FLAGS_HPET_LEGACY;
 	if (!prev_legacy && cur_legacy)
 		start = 1;
-	memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels,
-	       sizeof(kvm->arch.vpit->pit_state.channels));
-	kvm->arch.vpit->pit_state.flags = ps->flags;
-	kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start);
-	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	memcpy(&pit->pit_state.channels, &ps->channels,
+	       sizeof(pit->pit_state.channels));
+	pit->pit_state.flags = ps->flags;
+	for (i = 0; i < 3; i++)
+		kvm_pit_load_count(pit, i, pit->pit_state.channels[i].count,
+				   start && i == 0);
+	mutex_unlock(&pit->pit_state.lock);
 	return 0;
 }
 
 static int kvm_vm_ioctl_reinject(struct kvm *kvm,
 				 struct kvm_reinject_control *control)
 {
-	if (!kvm->arch.vpit)
+	struct kvm_pit *pit = kvm->arch.vpit;
+
+	if (!pit)
 		return -ENXIO;
-	mutex_lock(&kvm->arch.vpit->pit_state.lock);
-	kvm->arch.vpit->pit_state.reinject = control->pit_reinject;
-	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+
+	/* pit->pit_state.lock was overloaded to prevent userspace from getting
+	 * an inconsistent state after running multiple KVM_REINJECT_CONTROL
+	 * ioctls in parallel.  Use a separate lock if that ioctl isn't rare.
+	 */
+	mutex_lock(&pit->pit_state.lock);
+	kvm_pit_set_reinject(pit, control->pit_reinject);
+	mutex_unlock(&pit->pit_state.lock);
+
 	return 0;
 }
 
@@ -3878,16 +4063,17 @@ static void kvm_init_msr_list(void)
 
 		/*
 		 * Even MSRs that are valid in the host may not be exposed
-		 * to the guests in some cases.  We could work around this
-		 * in VMX with the generic MSR save/load machinery, but it
-		 * is not really worthwhile since it will really only
-		 * happen with nested virtualization.
+		 * to the guests in some cases.
 		 */
 		switch (msrs_to_save[i]) {
 		case MSR_IA32_BNDCFGS:
 			if (!kvm_x86_ops->mpx_supported())
 				continue;
 			break;
+		case MSR_TSC_AUX:
+			if (!kvm_x86_ops->rdtscp_supported())
+				continue;
+			break;
 		default:
 			break;
 		}
@@ -3923,7 +4109,7 @@ static int vcpu_mmio_write(struct kvm_vcpu *vcpu, gpa_t addr, int len,
 
 	do {
 		n = min(len, 8);
-		if (!(vcpu->arch.apic &&
+		if (!(lapic_in_kernel(vcpu) &&
 		      !kvm_iodevice_write(vcpu, &vcpu->arch.apic->dev, addr, n, v))
 		    && kvm_io_bus_write(vcpu, KVM_MMIO_BUS, addr, n, v))
 			break;
@@ -3943,7 +4129,7 @@ static int vcpu_mmio_read(struct kvm_vcpu *vcpu, gpa_t addr, int len, void *v)
 
 	do {
 		n = min(len, 8);
-		if (!(vcpu->arch.apic &&
+		if (!(lapic_in_kernel(vcpu) &&
 		      !kvm_iodevice_read(vcpu, &vcpu->arch.apic->dev,
 					 addr, n, v))
 		    && kvm_io_bus_read(vcpu, KVM_MMIO_BUS, addr, n, v))
@@ -4142,9 +4328,14 @@ static int vcpu_mmio_gva_to_gpa(struct kvm_vcpu *vcpu, unsigned long gva,
 	u32 access = ((kvm_x86_ops->get_cpl(vcpu) == 3) ? PFERR_USER_MASK : 0)
 		| (write ? PFERR_WRITE_MASK : 0);
 
+	/*
+	 * currently PKRU is only applied to ept enabled guest so
+	 * there is no pkey in EPT page table for L1 guest or EPT
+	 * shadow page table for L2 guest.
+	 */
 	if (vcpu_match_mmio_gva(vcpu, gva)
 	    && !permission_fault(vcpu, vcpu->arch.walk_mmu,
-				 vcpu->arch.access, access)) {
+				 vcpu->arch.access, 0, access)) {
 		*gpa = vcpu->arch.mmio_gfn << PAGE_SHIFT |
 					(gva & (PAGE_SIZE - 1));
 		trace_vcpu_match_mmio(gva, *gpa, write, false);
@@ -4176,7 +4367,7 @@ int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
 	ret = kvm_vcpu_write_guest(vcpu, gpa, val, bytes);
 	if (ret < 0)
 		return 0;
-	kvm_mmu_pte_write(vcpu, gpa, val, bytes);
+	kvm_page_track_write(vcpu, gpa, val, bytes);
 	return 1;
 }
 
@@ -4434,7 +4625,7 @@ static int emulator_cmpxchg_emulated(struct x86_emulate_ctxt *ctxt,
 		return X86EMUL_CMPXCHG_FAILED;
 
 	kvm_vcpu_mark_page_dirty(vcpu, gpa >> PAGE_SHIFT);
-	kvm_mmu_pte_write(vcpu, gpa, new, bytes);
+	kvm_page_track_write(vcpu, gpa, new, bytes);
 
 	return X86EMUL_CONTINUE;
 
@@ -4978,7 +5169,7 @@ static bool reexecute_instruction(struct kvm_vcpu *vcpu, gva_t cr2,
 				  int emulation_type)
 {
 	gpa_t gpa = cr2;
-	pfn_t pfn;
+	kvm_pfn_t pfn;
 
 	if (emulation_type & EMULTYPE_NO_REEXECUTE)
 		return false;
@@ -5744,6 +5935,12 @@ static void kvm_pv_kick_cpu_op(struct kvm *kvm, unsigned long flags, int apicid)
 	kvm_irq_delivery_to_apic(kvm, NULL, &lapic_irq, NULL);
 }
 
+void kvm_vcpu_deactivate_apicv(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.apicv_active = false;
+	kvm_x86_ops->refresh_apicv_exec_ctrl(vcpu);
+}
+
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 {
 	unsigned long nr, a0, a1, a2, a3, ret;
@@ -5808,23 +6005,10 @@ static int emulator_fix_hypercall(struct x86_emulate_ctxt *ctxt)
 	return emulator_write_emulated(ctxt, rip, instruction, 3, NULL);
 }
 
-/*
- * Check if userspace requested an interrupt window, and that the
- * interrupt window is open.
- *
- * No need to exit to userspace if we already have an interrupt queued.
- */
 static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu)
 {
-	if (!vcpu->run->request_interrupt_window || pic_in_kernel(vcpu->kvm))
-		return false;
-
-	if (kvm_cpu_has_interrupt(vcpu))
-		return false;
-
-	return (irqchip_split(vcpu->kvm)
-		? kvm_apic_accept_pic_intr(vcpu)
-		: kvm_arch_interrupt_allowed(vcpu));
+	return vcpu->run->request_interrupt_window &&
+		likely(!pic_in_kernel(vcpu->kvm));
 }
 
 static void post_kvm_run_save(struct kvm_vcpu *vcpu)
@@ -5835,17 +6019,9 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu)
 	kvm_run->flags = is_smm(vcpu) ? KVM_RUN_X86_SMM : 0;
 	kvm_run->cr8 = kvm_get_cr8(vcpu);
 	kvm_run->apic_base = kvm_get_apic_base(vcpu);
-	if (!irqchip_in_kernel(vcpu->kvm))
-		kvm_run->ready_for_interrupt_injection =
-			kvm_arch_interrupt_allowed(vcpu) &&
-			!kvm_cpu_has_interrupt(vcpu) &&
-			!kvm_event_needs_reinjection(vcpu);
-	else if (!pic_in_kernel(vcpu->kvm))
-		kvm_run->ready_for_interrupt_injection =
-			kvm_apic_accept_pic_intr(vcpu) &&
-			!kvm_cpu_has_interrupt(vcpu);
-	else
-		kvm_run->ready_for_interrupt_injection = 1;
+	kvm_run->ready_for_interrupt_injection =
+		pic_in_kernel(vcpu->kvm) ||
+		kvm_vcpu_ready_for_interrupt_injection(vcpu);
 }
 
 static void update_cr8_intercept(struct kvm_vcpu *vcpu)
@@ -5855,7 +6031,10 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 	if (!kvm_x86_ops->update_cr8_intercept)
 		return;
 
-	if (!vcpu->arch.apic)
+	if (!lapic_in_kernel(vcpu))
+		return;
+
+	if (vcpu->arch.apicv_active)
 		return;
 
 	if (!vcpu->arch.apic->vapic_addr)
@@ -5915,12 +6094,10 @@ static int inject_pending_event(struct kvm_vcpu *vcpu, bool req_int_win)
 	}
 
 	/* try to inject new event if pending */
-	if (vcpu->arch.nmi_pending) {
-		if (kvm_x86_ops->nmi_allowed(vcpu)) {
-			--vcpu->arch.nmi_pending;
-			vcpu->arch.nmi_injected = true;
-			kvm_x86_ops->set_nmi(vcpu);
-		}
+	if (vcpu->arch.nmi_pending && kvm_x86_ops->nmi_allowed(vcpu)) {
+		--vcpu->arch.nmi_pending;
+		vcpu->arch.nmi_injected = true;
+		kvm_x86_ops->set_nmi(vcpu);
 	} else if (kvm_cpu_has_injectable_intr(vcpu)) {
 		/*
 		 * Because interrupts can be injected asynchronously, we are
@@ -6194,20 +6371,30 @@ static void process_smi(struct kvm_vcpu *vcpu)
 	kvm_mmu_reset_context(vcpu);
 }
 
+void kvm_make_scan_ioapic_request(struct kvm *kvm)
+{
+	kvm_make_all_cpus_request(kvm, KVM_REQ_SCAN_IOAPIC);
+}
+
 static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
 {
+	u64 eoi_exit_bitmap[4];
+
 	if (!kvm_apic_hw_enabled(vcpu->arch.apic))
 		return;
 
-	memset(vcpu->arch.eoi_exit_bitmap, 0, 256 / 8);
+	bitmap_zero(vcpu->arch.ioapic_handled_vectors, 256);
 
 	if (irqchip_split(vcpu->kvm))
-		kvm_scan_ioapic_routes(vcpu, vcpu->arch.eoi_exit_bitmap);
+		kvm_scan_ioapic_routes(vcpu, vcpu->arch.ioapic_handled_vectors);
 	else {
-		kvm_x86_ops->sync_pir_to_irr(vcpu);
-		kvm_ioapic_scan_entry(vcpu, vcpu->arch.eoi_exit_bitmap);
+		if (vcpu->arch.apicv_active)
+			kvm_x86_ops->sync_pir_to_irr(vcpu);
+		kvm_ioapic_scan_entry(vcpu, vcpu->arch.ioapic_handled_vectors);
 	}
-	kvm_x86_ops->load_eoi_exitmap(vcpu);
+	bitmap_or((ulong *)eoi_exit_bitmap, vcpu->arch.ioapic_handled_vectors,
+		  vcpu_to_synic(vcpu)->vec_bitmap, 256);
+	kvm_x86_ops->load_eoi_exitmap(vcpu, eoi_exit_bitmap);
 }
 
 static void kvm_vcpu_flush_tlb(struct kvm_vcpu *vcpu)
@@ -6258,8 +6445,10 @@ void kvm_arch_mmu_notifier_invalidate_page(struct kvm *kvm,
 static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 {
 	int r;
-	bool req_int_win = !lapic_in_kernel(vcpu) &&
-		vcpu->run->request_interrupt_window;
+	bool req_int_win =
+		dm_request_for_irq_injection(vcpu) &&
+		kvm_cpu_accept_dm_intr(vcpu);
+
 	bool req_immediate_exit = false;
 
 	if (vcpu->requests) {
@@ -6313,7 +6502,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		if (kvm_check_request(KVM_REQ_IOAPIC_EOI_EXIT, vcpu)) {
 			BUG_ON(vcpu->arch.pending_ioapic_eoi > 255);
 			if (test_bit(vcpu->arch.pending_ioapic_eoi,
-				     (void *) vcpu->arch.eoi_exit_bitmap)) {
+				     vcpu->arch.ioapic_handled_vectors)) {
 				vcpu->run->exit_reason = KVM_EXIT_IOAPIC_EOI;
 				vcpu->run->eoi.vector =
 						vcpu->arch.pending_ioapic_eoi;
@@ -6337,6 +6526,20 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 			r = 0;
 			goto out;
 		}
+		if (kvm_check_request(KVM_REQ_HV_EXIT, vcpu)) {
+			vcpu->run->exit_reason = KVM_EXIT_HYPERV;
+			vcpu->run->hyperv = vcpu->arch.hyperv.exit;
+			r = 0;
+			goto out;
+		}
+
+		/*
+		 * KVM_REQ_HV_STIMER has to be processed after
+		 * KVM_REQ_CLOCK_UPDATE, because Hyper-V SynIC timers
+		 * depend on the guest clock being up-to-date
+		 */
+		if (kvm_check_request(KVM_REQ_HV_STIMER, vcpu))
+			kvm_hv_process_stimers(vcpu);
 	}
 
 	/*
@@ -6348,7 +6551,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		 * Update architecture specific hints for APIC
 		 * virtual interrupt delivery.
 		 */
-		if (kvm_x86_ops->hwapic_irr_update)
+		if (vcpu->arch.apicv_active)
 			kvm_x86_ops->hwapic_irr_update(vcpu,
 				kvm_lapic_find_highest_irr(vcpu));
 	}
@@ -6363,10 +6566,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		if (inject_pending_event(vcpu, req_int_win) != 0)
 			req_immediate_exit = true;
 		/* enable NMI/IRQ window open exits if needed */
-		else if (vcpu->arch.nmi_pending)
-			kvm_x86_ops->enable_nmi_window(vcpu);
-		else if (kvm_cpu_has_injectable_intr(vcpu) || req_int_win)
-			kvm_x86_ops->enable_irq_window(vcpu);
+		else {
+			if (vcpu->arch.nmi_pending)
+				kvm_x86_ops->enable_nmi_window(vcpu);
+			if (kvm_cpu_has_injectable_intr(vcpu) || req_int_win)
+				kvm_x86_ops->enable_irq_window(vcpu);
+		}
 
 		if (kvm_lapic_enabled(vcpu)) {
 			update_cr8_intercept(vcpu);
@@ -6384,14 +6589,16 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	kvm_x86_ops->prepare_guest_switch(vcpu);
 	if (vcpu->fpu_active)
 		kvm_load_guest_fpu(vcpu);
-	kvm_load_guest_xcr0(vcpu);
-
 	vcpu->mode = IN_GUEST_MODE;
 
 	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
 
-	/* We should set ->mode before check ->requests,
-	 * see the comment in make_all_cpus_request.
+	/*
+	 * We should set ->mode before check ->requests,
+	 * Please see the comment in kvm_make_all_cpus_request.
+	 * This also orders the write to mode from any reads
+	 * to the page tables done while the VCPU is running.
+	 * Please see the comment in kvm_flush_remote_tlbs.
 	 */
 	smp_mb__after_srcu_read_unlock();
 
@@ -6408,9 +6615,13 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		goto cancel_injection;
 	}
 
+	kvm_load_guest_xcr0(vcpu);
+
 	if (req_immediate_exit)
 		smp_send_reschedule(vcpu->cpu);
 
+	trace_kvm_entry(vcpu->vcpu_id);
+	wait_lapic_expire(vcpu);
 	__kvm_guest_enter();
 
 	if (unlikely(vcpu->arch.switch_db_regs)) {
@@ -6423,8 +6634,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD;
 	}
 
-	trace_kvm_entry(vcpu->vcpu_id);
-	wait_lapic_expire(vcpu);
 	kvm_x86_ops->run(vcpu);
 
 	/*
@@ -6434,12 +6643,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	 * KVM_DEBUGREG_WONT_EXIT again.
 	 */
 	if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) {
-		int i;
-
 		WARN_ON(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP);
 		kvm_x86_ops->sync_dirty_debug_regs(vcpu);
-		for (i = 0; i < KVM_NR_DB_REGS; i++)
-			vcpu->arch.eff_db[i] = vcpu->arch.db[i];
+		kvm_update_dr0123(vcpu);
+		kvm_update_dr6(vcpu);
+		kvm_update_dr7(vcpu);
+		vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD;
 	}
 
 	/*
@@ -6452,12 +6661,13 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	if (hw_breakpoint_active())
 		hw_breakpoint_restore();
 
-	vcpu->arch.last_guest_tsc = kvm_x86_ops->read_l1_tsc(vcpu,
-							   rdtsc());
+	vcpu->arch.last_guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
 
 	vcpu->mode = OUTSIDE_GUEST_MODE;
 	smp_wmb();
 
+	kvm_put_guest_xcr0(vcpu);
+
 	/* Interrupt is enabled by handle_external_intr() */
 	kvm_x86_ops->handle_external_intr(vcpu);
 
@@ -6562,7 +6772,8 @@ static int vcpu_run(struct kvm_vcpu *vcpu)
 		if (kvm_cpu_has_pending_timer(vcpu))
 			kvm_inject_pending_timer_irqs(vcpu);
 
-		if (dm_request_for_irq_injection(vcpu)) {
+		if (dm_request_for_irq_injection(vcpu) &&
+			kvm_vcpu_ready_for_interrupt_injection(vcpu)) {
 			r = 0;
 			vcpu->run->exit_reason = KVM_EXIT_IRQ_WINDOW_OPEN;
 			++vcpu->stat.request_irq_exits;
@@ -6854,7 +7065,7 @@ int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
 int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 				    struct kvm_mp_state *mp_state)
 {
-	if (!kvm_vcpu_has_lapic(vcpu) &&
+	if (!lapic_in_kernel(vcpu) &&
 	    mp_state->mp_state != KVM_MP_STATE_RUNNABLE)
 		return -EINVAL;
 
@@ -6925,7 +7136,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
 	kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
-	if (sregs->cr4 & X86_CR4_OSXSAVE)
+	if (sregs->cr4 & (X86_CR4_OSXSAVE | X86_CR4_PKE))
 		kvm_update_cpuid(vcpu);
 
 	idx = srcu_read_lock(&vcpu->kvm->srcu);
@@ -7015,7 +7226,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	 */
 	kvm_set_rflags(vcpu, rflags);
 
-	kvm_x86_ops->update_db_bp_intercept(vcpu);
+	kvm_x86_ops->update_bp_intercept(vcpu);
 
 	r = 0;
 
@@ -7104,7 +7315,6 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 	 * and assume host would use all available bits.
 	 * Guest xcr0 would be loaded later.
 	 */
-	kvm_put_guest_xcr0(vcpu);
 	vcpu->guest_fpu_loaded = 1;
 	__kernel_fpu_begin();
 	__copy_kernel_to_fpregs(&vcpu->arch.guest_fpu.state);
@@ -7113,8 +7323,6 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 
 void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 {
-	kvm_put_guest_xcr0(vcpu);
-
 	if (!vcpu->guest_fpu_loaded) {
 		vcpu->fpu_counter = 0;
 		return;
@@ -7130,7 +7338,7 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 	 * Every 255 times fpu_counter rolls over to 0; a guest that uses
 	 * the FPU in bursts will revert to loading it on demand.
 	 */
-	if (!vcpu->arch.eager_fpu) {
+	if (!use_eager_fpu()) {
 		if (++vcpu->fpu_counter < 5)
 			kvm_make_request(KVM_REQ_DEACTIVATE_FPU, vcpu);
 	}
@@ -7364,6 +7572,20 @@ int kvm_arch_hardware_setup(void)
 	if (r != 0)
 		return r;
 
+	if (kvm_has_tsc_control) {
+		/*
+		 * Make sure the user can only configure tsc_khz values that
+		 * fit into a signed integer.
+		 * A min value is not calculated needed because it will always
+		 * be 1 on all machines.
+		 */
+		u64 max = min(0x7fffffffULL,
+			      __scale_tsc(kvm_max_tsc_scaling_ratio, tsc_khz));
+		kvm_max_guest_tsc_khz = max;
+
+		kvm_default_tsc_scaling_ratio = 1ULL << kvm_tsc_scaling_ratio_frac_bits;
+	}
+
 	kvm_init_msr_list();
 	return 0;
 }
@@ -7395,6 +7617,7 @@ bool kvm_vcpu_compatible(struct kvm_vcpu *vcpu)
 }
 
 struct static_key kvm_no_apic_vcpu __read_mostly;
+EXPORT_SYMBOL_GPL(kvm_no_apic_vcpu);
 
 int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 {
@@ -7405,6 +7628,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	BUG_ON(vcpu->kvm == NULL);
 	kvm = vcpu->kvm;
 
+	vcpu->arch.apicv_active = kvm_x86_ops->get_enable_apicv();
 	vcpu->arch.pv.pv_unhalted = false;
 	vcpu->arch.emulate_ctxt.ops = &emulate_ops;
 	if (!irqchip_in_kernel(kvm) || kvm_vcpu_is_reset_bsp(vcpu))
@@ -7462,6 +7686,8 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.pending_external_vector = -1;
 
+	kvm_hv_vcpu_init(vcpu);
+
 	return 0;
 
 fail_free_mce_banks:
@@ -7480,6 +7706,7 @@ void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
 {
 	int idx;
 
+	kvm_hv_vcpu_uninit(vcpu);
 	kvm_pmu_destroy(vcpu);
 	kfree(vcpu->arch.mce_banks);
 	kvm_free_lapic(vcpu);
@@ -7522,6 +7749,9 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	INIT_DELAYED_WORK(&kvm->arch.kvmclock_update_work, kvmclock_update_fn);
 	INIT_DELAYED_WORK(&kvm->arch.kvmclock_sync_work, kvmclock_sync_fn);
 
+	kvm_page_track_init(kvm);
+	kvm_mmu_init_vm(kvm);
+
 	return 0;
 }
 
@@ -7648,6 +7878,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	kfree(kvm->arch.vioapic);
 	kvm_free_vcpus(kvm);
 	kfree(rcu_dereference_check(kvm->arch.apic_map, 1));
+	kvm_mmu_uninit_vm(kvm);
 }
 
 void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
@@ -7669,6 +7900,8 @@ void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
 			free->arch.lpage_info[i - 1] = NULL;
 		}
 	}
+
+	kvm_page_track_free_memslot(free, dont);
 }
 
 int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
@@ -7677,6 +7910,7 @@ int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
 	int i;
 
 	for (i = 0; i < KVM_NR_PAGE_SIZES; ++i) {
+		struct kvm_lpage_info *linfo;
 		unsigned long ugfn;
 		int lpages;
 		int level = i + 1;
@@ -7691,15 +7925,16 @@ int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
 		if (i == 0)
 			continue;
 
-		slot->arch.lpage_info[i - 1] = kvm_kvzalloc(lpages *
-					sizeof(*slot->arch.lpage_info[i - 1]));
-		if (!slot->arch.lpage_info[i - 1])
+		linfo = kvm_kvzalloc(lpages * sizeof(*linfo));
+		if (!linfo)
 			goto out_free;
 
+		slot->arch.lpage_info[i - 1] = linfo;
+
 		if (slot->base_gfn & (KVM_PAGES_PER_HPAGE(level) - 1))
-			slot->arch.lpage_info[i - 1][0].write_count = 1;
+			linfo[0].disallow_lpage = 1;
 		if ((slot->base_gfn + npages) & (KVM_PAGES_PER_HPAGE(level) - 1))
-			slot->arch.lpage_info[i - 1][lpages - 1].write_count = 1;
+			linfo[lpages - 1].disallow_lpage = 1;
 		ugfn = slot->userspace_addr >> PAGE_SHIFT;
 		/*
 		 * If the gfn and userspace address are not aligned wrt each
@@ -7711,10 +7946,13 @@ int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot,
 			unsigned long j;
 
 			for (j = 0; j < lpages; ++j)
-				slot->arch.lpage_info[i - 1][j].write_count = 1;
+				linfo[j].disallow_lpage = 1;
 		}
 	}
 
+	if (kvm_page_track_create_memslot(slot, npages))
+		goto out_free;
+
 	return 0;
 
 out_free:
@@ -7874,6 +8112,9 @@ static inline bool kvm_vcpu_has_events(struct kvm_vcpu *vcpu)
 	    kvm_cpu_has_interrupt(vcpu))
 		return true;
 
+	if (kvm_hv_has_stimer_pending(vcpu))
+		return true;
+
 	return false;
 }
 
@@ -8165,6 +8406,12 @@ int kvm_arch_update_irqfd_routing(struct kvm *kvm, unsigned int host_irq,
 	return kvm_x86_ops->update_pi_irte(kvm, host_irq, guest_irq, set);
 }
 
+bool kvm_vector_hashing_enabled(void)
+{
+	return vector_hashing;
+}
+EXPORT_SYMBOL_GPL(kvm_vector_hashing_enabled);
+
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_fast_mmio);
 EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index f2afa5fe48a6..7ce3634ab5fe 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -179,10 +179,12 @@ int kvm_mtrr_set_msr(struct kvm_vcpu *vcpu, u32 msr, u64 data);
 int kvm_mtrr_get_msr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata);
 bool kvm_mtrr_check_gfn_range_consistency(struct kvm_vcpu *vcpu, gfn_t gfn,
 					  int page_num);
+bool kvm_vector_hashing_enabled(void);
 
 #define KVM_SUPPORTED_XCR0     (XFEATURE_MASK_FP | XFEATURE_MASK_SSE \
 				| XFEATURE_MASK_YMM | XFEATURE_MASK_BNDREGS \
-				| XFEATURE_MASK_BNDCSR | XFEATURE_MASK_AVX512)
+				| XFEATURE_MASK_BNDCSR | XFEATURE_MASK_AVX512 \
+				| XFEATURE_MASK_PKRU)
 extern u64 host_xcr0;
 
 extern u64 kvm_supported_xcr0(void);
@@ -192,4 +194,19 @@ extern unsigned int min_timer_period_us;
 extern unsigned int lapic_timer_advance_ns;
 
 extern struct static_key kvm_no_apic_vcpu;
+
+/* Same "calling convention" as do_div:
+ * - divide (n << 32) by base
+ * - put result in n
+ * - return remainder
+ */
+#define do_shl32_div32(n, base)					\
+	({							\
+	    u32 __quot, __rem;					\
+	    asm("divl %2" : "=a" (__quot), "=d" (__rem)		\
+			: "rm" (base), "0" (0), "1" ((u32) n));	\
+	    n = __quot;						\
+	    __rem;						\
+	 })
+
 #endif
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index a0d09f6c6533..fd57d3ae7e16 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -1414,6 +1414,7 @@ __init void lguest_init(void)
 	pv_info.kernel_rpl = 1;
 	/* Everyone except Xen runs with this set. */
 	pv_info.shared_kernel_pmd = 1;
+	pv_info.features = 0;
 
 	/*
 	 * We set up all the lguest overrides for sensitive operations.  These
@@ -1472,7 +1473,6 @@ __init void lguest_init(void)
 	pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mmu_mode;
 	pv_mmu_ops.lazy_mode.flush = paravirt_flush_lazy_mmu;
 	pv_mmu_ops.pte_update = lguest_pte_update;
-	pv_mmu_ops.pte_update_defer = lguest_pte_update;
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* APIC read/write intercepts */
@@ -1520,12 +1520,6 @@ __init void lguest_init(void)
 	 */
 	reserve_top_address(lguest_data.reserve_mem);
 
-	/*
-	 * If we don't initialize the lock dependency checker now, it crashes
-	 * atomic_notifier_chain_register, then paravirt_disable_iospace.
-	 */
-	lockdep_init();
-
 	/* Hook in our special panic hypercall code. */
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
@@ -1535,7 +1529,7 @@ __init void lguest_init(void)
 	 */
 	cpu_detect(&new_cpu_data);
 	/* head.S usually sets up the first capability word, so do it here. */
-	new_cpu_data.x86_capability[0] = cpuid_edx(1);
+	new_cpu_data.x86_capability[CPUID_1_EDX] = cpuid_edx(1);
 
 	/* Math is always hard! */
 	set_cpu_cap(&new_cpu_data, X86_FEATURE_FPU);
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index f2587888d987..72a576752a7e 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -2,6 +2,9 @@
 # Makefile for x86 specific library files.
 #
 
+# Produces uninteresting flaky coverage.
+KCOV_INSTRUMENT_delay.o	:= n
+
 inat_tables_script = $(srctree)/arch/x86/tools/gen-insn-attr-x86.awk
 inat_tables_maps = $(srctree)/arch/x86/lib/x86-opcode-map.txt
 quiet_cmd_inat_tables = GEN     $@
@@ -16,7 +19,7 @@ clean-files := inat-tables.c
 
 obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o
 
-lib-y := delay.o misc.o cmdline.o
+lib-y := delay.o misc.o cmdline.o cpu.o
 lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
 lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
diff --git a/arch/x86/lib/clear_page_64.S b/arch/x86/lib/clear_page_64.S
index a2fe51b00cce..65be7cfaf947 100644
--- a/arch/x86/lib/clear_page_64.S
+++ b/arch/x86/lib/clear_page_64.S
@@ -1,5 +1,5 @@
 #include <linux/linkage.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 
 /*
diff --git a/arch/x86/lib/cmdline.c b/arch/x86/lib/cmdline.c
index 422db000d727..5cc78bf57232 100644
--- a/arch/x86/lib/cmdline.c
+++ b/arch/x86/lib/cmdline.c
@@ -21,12 +21,16 @@ static inline int myisspace(u8 c)
  * @option: option string to look for
  *
  * Returns the position of that @option (starts counting with 1)
- * or 0 on not found.
+ * or 0 on not found.  @option will only be found if it is found
+ * as an entire word in @cmdline.  For instance, if @option="car"
+ * then a cmdline which contains "cart" will not match.
  */
-int cmdline_find_option_bool(const char *cmdline, const char *option)
+static int
+__cmdline_find_option_bool(const char *cmdline, int max_cmdline_size,
+			   const char *option)
 {
 	char c;
-	int len, pos = 0, wstart = 0;
+	int pos = 0, wstart = 0;
 	const char *opptr = NULL;
 	enum {
 		st_wordstart = 0,	/* Start of word/after whitespace */
@@ -37,11 +41,11 @@ int cmdline_find_option_bool(const char *cmdline, const char *option)
 	if (!cmdline)
 		return -1;      /* No command line */
 
-	len = min_t(int, strlen(cmdline), COMMAND_LINE_SIZE);
-	if (!len)
-		return 0;
-
-	while (len--) {
+	/*
+	 * This 'pos' check ensures we do not overrun
+	 * a non-NULL-terminated 'cmdline'
+	 */
+	while (pos < max_cmdline_size) {
 		c = *(char *)cmdline++;
 		pos++;
 
@@ -58,18 +62,35 @@ int cmdline_find_option_bool(const char *cmdline, const char *option)
 			/* fall through */
 
 		case st_wordcmp:
-			if (!*opptr)
+			if (!*opptr) {
+				/*
+				 * We matched all the way to the end of the
+				 * option we were looking for.  If the
+				 * command-line has a space _or_ ends, then
+				 * we matched!
+				 */
 				if (!c || myisspace(c))
 					return wstart;
-				else
-					state = st_wordskip;
-			else if (!c)
+				/*
+				 * We hit the end of the option, but _not_
+				 * the end of a word on the cmdline.  Not
+				 * a match.
+				 */
+			} else if (!c) {
+				/*
+				 * Hit the NULL terminator on the end of
+				 * cmdline.
+				 */
 				return 0;
-			else if (c != *opptr++)
-				state = st_wordskip;
-			else if (!len)		/* last word and is matching */
-				return wstart;
-			break;
+			} else if (c == *opptr++) {
+				/*
+				 * We are currently matching, so continue
+				 * to the next character on the cmdline.
+				 */
+				break;
+			}
+			state = st_wordskip;
+			/* fall through */
 
 		case st_wordskip:
 			if (!c)
@@ -82,3 +103,8 @@ int cmdline_find_option_bool(const char *cmdline, const char *option)
 
 	return 0;	/* Buffer overrun */
 }
+
+int cmdline_find_option_bool(const char *cmdline, const char *option)
+{
+	return __cmdline_find_option_bool(cmdline, COMMAND_LINE_SIZE, option);
+}
diff --git a/arch/x86/lib/copy_page_64.S b/arch/x86/lib/copy_page_64.S
index 009f98216b7e..24ef1c2104d4 100644
--- a/arch/x86/lib/copy_page_64.S
+++ b/arch/x86/lib/copy_page_64.S
@@ -1,7 +1,7 @@
 /* Written 2003 by Andi Kleen, based on a kernel by Evandro Menezes */
 
 #include <linux/linkage.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 
 /*
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index 982ce34f4a9b..2b0ef26da0bd 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -10,7 +10,7 @@
 #include <asm/current.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 #include <asm/asm.h>
 #include <asm/smap.h>
@@ -232,17 +232,31 @@ ENDPROC(copy_user_enhanced_fast_string)
 
 /*
  * copy_user_nocache - Uncached memory copy with exception handling
- * This will force destination/source out of cache for more performance.
+ * This will force destination out of cache for more performance.
+ *
+ * Note: Cached memory copy is used when destination or size is not
+ * naturally aligned. That is:
+ *  - Require 8-byte alignment when size is 8 bytes or larger.
+ *  - Require 4-byte alignment when size is 4 bytes.
  */
 ENTRY(__copy_user_nocache)
 	ASM_STAC
+
+	/* If size is less than 8 bytes, go to 4-byte copy */
 	cmpl $8,%edx
-	jb 20f		/* less then 8 bytes, go to byte copy loop */
+	jb .L_4b_nocache_copy_entry
+
+	/* If destination is not 8-byte aligned, "cache" copy to align it */
 	ALIGN_DESTINATION
+
+	/* Set 4x8-byte copy count and remainder */
 	movl %edx,%ecx
 	andl $63,%edx
 	shrl $6,%ecx
-	jz 17f
+	jz .L_8b_nocache_copy_entry	/* jump if count is 0 */
+
+	/* Perform 4x8-byte nocache loop-copy */
+.L_4x8b_nocache_copy_loop:
 1:	movq (%rsi),%r8
 2:	movq 1*8(%rsi),%r9
 3:	movq 2*8(%rsi),%r10
@@ -262,60 +276,106 @@ ENTRY(__copy_user_nocache)
 	leaq 64(%rsi),%rsi
 	leaq 64(%rdi),%rdi
 	decl %ecx
-	jnz 1b
-17:	movl %edx,%ecx
+	jnz .L_4x8b_nocache_copy_loop
+
+	/* Set 8-byte copy count and remainder */
+.L_8b_nocache_copy_entry:
+	movl %edx,%ecx
 	andl $7,%edx
 	shrl $3,%ecx
-	jz 20f
-18:	movq (%rsi),%r8
-19:	movnti %r8,(%rdi)
+	jz .L_4b_nocache_copy_entry	/* jump if count is 0 */
+
+	/* Perform 8-byte nocache loop-copy */
+.L_8b_nocache_copy_loop:
+20:	movq (%rsi),%r8
+21:	movnti %r8,(%rdi)
 	leaq 8(%rsi),%rsi
 	leaq 8(%rdi),%rdi
 	decl %ecx
-	jnz 18b
-20:	andl %edx,%edx
-	jz 23f
+	jnz .L_8b_nocache_copy_loop
+
+	/* If no byte left, we're done */
+.L_4b_nocache_copy_entry:
+	andl %edx,%edx
+	jz .L_finish_copy
+
+	/* If destination is not 4-byte aligned, go to byte copy: */
+	movl %edi,%ecx
+	andl $3,%ecx
+	jnz .L_1b_cache_copy_entry
+
+	/* Set 4-byte copy count (1 or 0) and remainder */
 	movl %edx,%ecx
-21:	movb (%rsi),%al
-22:	movb %al,(%rdi)
+	andl $3,%edx
+	shrl $2,%ecx
+	jz .L_1b_cache_copy_entry	/* jump if count is 0 */
+
+	/* Perform 4-byte nocache copy: */
+30:	movl (%rsi),%r8d
+31:	movnti %r8d,(%rdi)
+	leaq 4(%rsi),%rsi
+	leaq 4(%rdi),%rdi
+
+	/* If no bytes left, we're done: */
+	andl %edx,%edx
+	jz .L_finish_copy
+
+	/* Perform byte "cache" loop-copy for the remainder */
+.L_1b_cache_copy_entry:
+	movl %edx,%ecx
+.L_1b_cache_copy_loop:
+40:	movb (%rsi),%al
+41:	movb %al,(%rdi)
 	incq %rsi
 	incq %rdi
 	decl %ecx
-	jnz 21b
-23:	xorl %eax,%eax
+	jnz .L_1b_cache_copy_loop
+
+	/* Finished copying; fence the prior stores */
+.L_finish_copy:
+	xorl %eax,%eax
 	ASM_CLAC
 	sfence
 	ret
 
 	.section .fixup,"ax"
-30:	shll $6,%ecx
+.L_fixup_4x8b_copy:
+	shll $6,%ecx
 	addl %ecx,%edx
-	jmp 60f
-40:	lea (%rdx,%rcx,8),%rdx
-	jmp 60f
-50:	movl %ecx,%edx
-60:	sfence
+	jmp .L_fixup_handle_tail
+.L_fixup_8b_copy:
+	lea (%rdx,%rcx,8),%rdx
+	jmp .L_fixup_handle_tail
+.L_fixup_4b_copy:
+	lea (%rdx,%rcx,4),%rdx
+	jmp .L_fixup_handle_tail
+.L_fixup_1b_copy:
+	movl %ecx,%edx
+.L_fixup_handle_tail:
+	sfence
 	jmp copy_user_handle_tail
 	.previous
 
-	_ASM_EXTABLE(1b,30b)
-	_ASM_EXTABLE(2b,30b)
-	_ASM_EXTABLE(3b,30b)
-	_ASM_EXTABLE(4b,30b)
-	_ASM_EXTABLE(5b,30b)
-	_ASM_EXTABLE(6b,30b)
-	_ASM_EXTABLE(7b,30b)
-	_ASM_EXTABLE(8b,30b)
-	_ASM_EXTABLE(9b,30b)
-	_ASM_EXTABLE(10b,30b)
-	_ASM_EXTABLE(11b,30b)
-	_ASM_EXTABLE(12b,30b)
-	_ASM_EXTABLE(13b,30b)
-	_ASM_EXTABLE(14b,30b)
-	_ASM_EXTABLE(15b,30b)
-	_ASM_EXTABLE(16b,30b)
-	_ASM_EXTABLE(18b,40b)
-	_ASM_EXTABLE(19b,40b)
-	_ASM_EXTABLE(21b,50b)
-	_ASM_EXTABLE(22b,50b)
+	_ASM_EXTABLE(1b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(2b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(3b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(4b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(5b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(6b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(7b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(8b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(9b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(10b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(11b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(12b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(13b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(14b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(15b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(16b,.L_fixup_4x8b_copy)
+	_ASM_EXTABLE(20b,.L_fixup_8b_copy)
+	_ASM_EXTABLE(21b,.L_fixup_8b_copy)
+	_ASM_EXTABLE(30b,.L_fixup_4b_copy)
+	_ASM_EXTABLE(31b,.L_fixup_4b_copy)
+	_ASM_EXTABLE(40b,.L_fixup_1b_copy)
+	_ASM_EXTABLE(41b,.L_fixup_1b_copy)
 ENDPROC(__copy_user_nocache)
diff --git a/arch/x86/lib/cpu.c b/arch/x86/lib/cpu.c
new file mode 100644
index 000000000000..aa417a97511c
--- /dev/null
+++ b/arch/x86/lib/cpu.c
@@ -0,0 +1,35 @@
+#include <linux/module.h>
+
+unsigned int x86_family(unsigned int sig)
+{
+	unsigned int x86;
+
+	x86 = (sig >> 8) & 0xf;
+
+	if (x86 == 0xf)
+		x86 += (sig >> 20) & 0xff;
+
+	return x86;
+}
+EXPORT_SYMBOL_GPL(x86_family);
+
+unsigned int x86_model(unsigned int sig)
+{
+	unsigned int fam, model;
+
+	 fam = x86_family(sig);
+
+	model = (sig >> 4) & 0xf;
+
+	if (fam >= 0x6)
+		model += ((sig >> 16) & 0xf) << 4;
+
+	return model;
+}
+EXPORT_SYMBOL_GPL(x86_model);
+
+unsigned int x86_stepping(unsigned int sig)
+{
+	return sig & 0xf;
+}
+EXPORT_SYMBOL_GPL(x86_stepping);
diff --git a/arch/x86/lib/csum-wrappers_64.c b/arch/x86/lib/csum-wrappers_64.c
index 1318f75d56e4..28a6654f0d08 100644
--- a/arch/x86/lib/csum-wrappers_64.c
+++ b/arch/x86/lib/csum-wrappers_64.c
@@ -135,7 +135,7 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck);
 
 __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 			const struct in6_addr *daddr,
-			__u32 len, unsigned short proto, __wsum sum)
+			__u32 len, __u8 proto, __wsum sum)
 {
 	__u64 rest, sum64;
 
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index e912b2f6d36e..2f07c291dcc8 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -102,7 +102,7 @@ static void delay_mwaitx(unsigned long __loops)
 		 * Use cpu_tss as a cacheline-aligned, seldomly
 		 * accessed per-cpu variable as the monitor target.
 		 */
-		__monitorx(this_cpu_ptr(&cpu_tss), 0, 0);
+		__monitorx(raw_cpu_ptr(&cpu_tss), 0, 0);
 
 		/*
 		 * AMD, like Intel, supports the EAX hint and EAX=0xf
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 8f72b334aea0..1a416935bac9 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -374,7 +374,7 @@ void insn_get_displacement(struct insn *insn)
 		if (mod == 3)
 			goto out;
 		if (mod == 1) {
-			insn->displacement.value = get_next(char, insn);
+			insn->displacement.value = get_next(signed char, insn);
 			insn->displacement.nbytes = 1;
 		} else if (insn->addr_bytes == 2) {
 			if ((mod == 0 && rm == 6) || mod == 2) {
@@ -532,7 +532,7 @@ void insn_get_immediate(struct insn *insn)
 
 	switch (inat_immediate_size(insn->attr)) {
 	case INAT_IMM_BYTE:
-		insn->immediate.value = get_next(char, insn);
+		insn->immediate.value = get_next(signed char, insn);
 		insn->immediate.nbytes = 1;
 		break;
 	case INAT_IMM_WORD:
@@ -566,7 +566,7 @@ void insn_get_immediate(struct insn *insn)
 		goto err_out;
 	}
 	if (inat_has_second_immediate(insn->attr)) {
-		insn->immediate2.value = get_next(char, insn);
+		insn->immediate2.value = get_next(signed char, insn);
 		insn->immediate2.nbytes = 1;
 	}
 done:
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 16698bba87de..2ec0b0abbfaa 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -1,7 +1,8 @@
 /* Copyright 2002 Andi Kleen */
 
 #include <linux/linkage.h>
-#include <asm/cpufeature.h>
+#include <asm/errno.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 
 /*
@@ -177,3 +178,120 @@ ENTRY(memcpy_orig)
 .Lend:
 	retq
 ENDPROC(memcpy_orig)
+
+#ifndef CONFIG_UML
+/*
+ * memcpy_mcsafe - memory copy with machine check exception handling
+ * Note that we only catch machine checks when reading the source addresses.
+ * Writes to target are posted and don't generate machine checks.
+ */
+ENTRY(memcpy_mcsafe)
+	cmpl $8, %edx
+	/* Less than 8 bytes? Go to byte copy loop */
+	jb .L_no_whole_words
+
+	/* Check for bad alignment of source */
+	testl $7, %esi
+	/* Already aligned */
+	jz .L_8byte_aligned
+
+	/* Copy one byte at a time until source is 8-byte aligned */
+	movl %esi, %ecx
+	andl $7, %ecx
+	subl $8, %ecx
+	negl %ecx
+	subl %ecx, %edx
+.L_copy_leading_bytes:
+	movb (%rsi), %al
+	movb %al, (%rdi)
+	incq %rsi
+	incq %rdi
+	decl %ecx
+	jnz .L_copy_leading_bytes
+
+.L_8byte_aligned:
+	/* Figure out how many whole cache lines (64-bytes) to copy */
+	movl %edx, %ecx
+	andl $63, %edx
+	shrl $6, %ecx
+	jz .L_no_whole_cache_lines
+
+	/* Loop copying whole cache lines */
+.L_cache_w0: movq (%rsi), %r8
+.L_cache_w1: movq 1*8(%rsi), %r9
+.L_cache_w2: movq 2*8(%rsi), %r10
+.L_cache_w3: movq 3*8(%rsi), %r11
+	movq %r8, (%rdi)
+	movq %r9, 1*8(%rdi)
+	movq %r10, 2*8(%rdi)
+	movq %r11, 3*8(%rdi)
+.L_cache_w4: movq 4*8(%rsi), %r8
+.L_cache_w5: movq 5*8(%rsi), %r9
+.L_cache_w6: movq 6*8(%rsi), %r10
+.L_cache_w7: movq 7*8(%rsi), %r11
+	movq %r8, 4*8(%rdi)
+	movq %r9, 5*8(%rdi)
+	movq %r10, 6*8(%rdi)
+	movq %r11, 7*8(%rdi)
+	leaq 64(%rsi), %rsi
+	leaq 64(%rdi), %rdi
+	decl %ecx
+	jnz .L_cache_w0
+
+	/* Are there any trailing 8-byte words? */
+.L_no_whole_cache_lines:
+	movl %edx, %ecx
+	andl $7, %edx
+	shrl $3, %ecx
+	jz .L_no_whole_words
+
+	/* Copy trailing words */
+.L_copy_trailing_words:
+	movq (%rsi), %r8
+	mov %r8, (%rdi)
+	leaq 8(%rsi), %rsi
+	leaq 8(%rdi), %rdi
+	decl %ecx
+	jnz .L_copy_trailing_words
+
+	/* Any trailing bytes? */
+.L_no_whole_words:
+	andl %edx, %edx
+	jz .L_done_memcpy_trap
+
+	/* Copy trailing bytes */
+	movl %edx, %ecx
+.L_copy_trailing_bytes:
+	movb (%rsi), %al
+	movb %al, (%rdi)
+	incq %rsi
+	incq %rdi
+	decl %ecx
+	jnz .L_copy_trailing_bytes
+
+	/* Copy successful. Return zero */
+.L_done_memcpy_trap:
+	xorq %rax, %rax
+	ret
+ENDPROC(memcpy_mcsafe)
+
+	.section .fixup, "ax"
+	/* Return -EFAULT for any failure */
+.L_memcpy_mcsafe_fail:
+	mov	$-EFAULT, %rax
+	ret
+
+	.previous
+
+	_ASM_EXTABLE_FAULT(.L_copy_leading_bytes, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w0, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w1, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w3, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w3, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w4, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w5, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w6, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_cache_w7, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_copy_trailing_words, .L_memcpy_mcsafe_fail)
+	_ASM_EXTABLE_FAULT(.L_copy_trailing_bytes, .L_memcpy_mcsafe_fail)
+#endif
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index ca2afdd6d98e..90ce01bee00c 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -6,7 +6,7 @@
  *	- Copyright 2011 Fenghua Yu <fenghua.yu@intel.com>
  */
 #include <linux/linkage.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 
 #undef memmove
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index 2661fad05827..e1229ecd2a82 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -1,7 +1,7 @@
 /* Copyright 2002 Andi Kleen, SuSE Labs */
 
 #include <linux/linkage.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/alternative-asm.h>
 
 .weak memset
@@ -9,7 +9,7 @@
 /*
  * ISO C memset - set a memory block to a byte value. This function uses fast
  * string to get better performance than the original function. The code is
- * simpler and shorter than the orignal function as well.
+ * simpler and shorter than the original function as well.
  *
  * rdi   destination
  * rsi   value (char)
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index 43623739c7cf..004c861b1648 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -1,6 +1,8 @@
 #include <linux/module.h>
 #include <linux/preempt.h>
 #include <asm/msr.h>
+#define CREATE_TRACE_POINTS
+#include <asm/msr-trace.h>
 
 struct msr *msrs_alloc(void)
 {
@@ -108,3 +110,27 @@ int msr_clear_bit(u32 msr, u8 bit)
 {
 	return __flip_bit(msr, bit, false);
 }
+
+#ifdef CONFIG_TRACEPOINTS
+void do_trace_write_msr(unsigned msr, u64 val, int failed)
+{
+	trace_write_msr(msr, val, failed);
+}
+EXPORT_SYMBOL(do_trace_write_msr);
+EXPORT_TRACEPOINT_SYMBOL(write_msr);
+
+void do_trace_read_msr(unsigned msr, u64 val, int failed)
+{
+	trace_read_msr(msr, val, failed);
+}
+EXPORT_SYMBOL(do_trace_read_msr);
+EXPORT_TRACEPOINT_SYMBOL(read_msr);
+
+void do_trace_rdpmc(unsigned counter, u64 val, int failed)
+{
+	trace_rdpmc(counter, val, failed);
+}
+EXPORT_SYMBOL(do_trace_rdpmc);
+EXPORT_TRACEPOINT_SYMBOL(rdpmc);
+
+#endif
diff --git a/arch/x86/lib/rwsem.S b/arch/x86/lib/rwsem.S
index 40027db99140..be110efa0096 100644
--- a/arch/x86/lib/rwsem.S
+++ b/arch/x86/lib/rwsem.S
@@ -15,6 +15,7 @@
 
 #include <linux/linkage.h>
 #include <asm/alternative-asm.h>
+#include <asm/frame.h>
 
 #define __ASM_HALF_REG(reg)	__ASM_SEL(reg, e##reg)
 #define __ASM_HALF_SIZE(inst)	__ASM_SEL(inst##w, inst##l)
@@ -84,24 +85,29 @@
 
 /* Fix up special calling conventions */
 ENTRY(call_rwsem_down_read_failed)
+	FRAME_BEGIN
 	save_common_regs
 	__ASM_SIZE(push,) %__ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_down_read_failed
 	__ASM_SIZE(pop,) %__ASM_REG(dx)
 	restore_common_regs
+	FRAME_END
 	ret
 ENDPROC(call_rwsem_down_read_failed)
 
 ENTRY(call_rwsem_down_write_failed)
+	FRAME_BEGIN
 	save_common_regs
 	movq %rax,%rdi
 	call rwsem_down_write_failed
 	restore_common_regs
+	FRAME_END
 	ret
 ENDPROC(call_rwsem_down_write_failed)
 
 ENTRY(call_rwsem_wake)
+	FRAME_BEGIN
 	/* do nothing if still outstanding active readers */
 	__ASM_HALF_SIZE(dec) %__ASM_HALF_REG(dx)
 	jnz 1f
@@ -109,15 +115,18 @@ ENTRY(call_rwsem_wake)
 	movq %rax,%rdi
 	call rwsem_wake
 	restore_common_regs
-1:	ret
+1:	FRAME_END
+	ret
 ENDPROC(call_rwsem_wake)
 
 ENTRY(call_rwsem_downgrade_wake)
+	FRAME_BEGIN
 	save_common_regs
 	__ASM_SIZE(push,) %__ASM_REG(dx)
 	movq %rax,%rdi
 	call rwsem_downgrade_wake
 	__ASM_SIZE(pop,) %__ASM_REG(dx)
 	restore_common_regs
+	FRAME_END
 	ret
 ENDPROC(call_rwsem_downgrade_wake)
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 65c47fda26fc..f98913258c63 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,3 +1,6 @@
+# Kernel does not boot with instrumentation of tlb.c.
+KCOV_INSTRUMENT_tlb.o	:= n
+
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o physaddr.o gup.o setup_nx.o
 
@@ -15,6 +18,7 @@ obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_X86_PTDUMP_CORE)	+= dump_pagetables.o
+obj-$(CONFIG_X86_PTDUMP)	+= debug_pagetables.o
 
 obj-$(CONFIG_HIGHMEM)		+= highmem_32.o
 
@@ -33,3 +37,5 @@ obj-$(CONFIG_ACPI_NUMA)		+= srat.o
 obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
 obj-$(CONFIG_X86_INTEL_MPX)	+= mpx.o
+obj-$(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) += pkeys.o
+
diff --git a/arch/x86/mm/debug_pagetables.c b/arch/x86/mm/debug_pagetables.c
new file mode 100644
index 000000000000..bfcffdf6c577
--- /dev/null
+++ b/arch/x86/mm/debug_pagetables.c
@@ -0,0 +1,46 @@
+#include <linux/debugfs.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <asm/pgtable.h>
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+	ptdump_walk_pgd_level(m, NULL);
+	return 0;
+}
+
+static int ptdump_open(struct inode *inode, struct file *filp)
+{
+	return single_open(filp, ptdump_show, NULL);
+}
+
+static const struct file_operations ptdump_fops = {
+	.owner		= THIS_MODULE,
+	.open		= ptdump_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static struct dentry *pe;
+
+static int __init pt_dump_debug_init(void)
+{
+	pe = debugfs_create_file("kernel_page_tables", S_IRUSR, NULL, NULL,
+				 &ptdump_fops);
+	if (!pe)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static void __exit pt_dump_debug_exit(void)
+{
+	debugfs_remove_recursive(pe);
+}
+
+module_init(pt_dump_debug_init);
+module_exit(pt_dump_debug_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
+MODULE_DESCRIPTION("Kernel debugging helper that dumps pagetables");
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 1bf417e9cc13..99bfb192803f 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -89,7 +89,7 @@ static struct addr_marker address_markers[] = {
 	{ 0/* VMALLOC_START */, "vmalloc() Area" },
 	{ 0/*VMALLOC_END*/,     "vmalloc() End" },
 # ifdef CONFIG_HIGHMEM
-	{ 0/*PKMAP_BASE*/,      "Persisent kmap() Area" },
+	{ 0/*PKMAP_BASE*/,      "Persistent kmap() Area" },
 # endif
 	{ 0/*FIXADDR_START*/,   "Fixmap Area" },
 #endif
@@ -358,6 +358,20 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 #define pgd_none(a)  pud_none(__pud(pgd_val(a)))
 #endif
 
+static inline bool is_hypervisor_range(int idx)
+{
+#ifdef CONFIG_X86_64
+	/*
+	 * ffff800000000000 - ffff87ffffffffff is reserved for
+	 * the hypervisor.
+	 */
+	return	(idx >= pgd_index(__PAGE_OFFSET) - 16) &&
+		(idx <  pgd_index(__PAGE_OFFSET));
+#else
+	return false;
+#endif
+}
+
 static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
 				       bool checkwx)
 {
@@ -381,7 +395,7 @@ static void ptdump_walk_pgd_level_core(struct seq_file *m, pgd_t *pgd,
 
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
-		if (!pgd_none(*start)) {
+		if (!pgd_none(*start) && !is_hypervisor_range(i)) {
 			if (pgd_large(*start) || !pgd_present(*start)) {
 				prot = pgd_flags(*start);
 				note_page(m, &st, __pgprot(prot), 1);
@@ -411,38 +425,15 @@ void ptdump_walk_pgd_level(struct seq_file *m, pgd_t *pgd)
 {
 	ptdump_walk_pgd_level_core(m, pgd, false);
 }
+EXPORT_SYMBOL_GPL(ptdump_walk_pgd_level);
 
 void ptdump_walk_pgd_level_checkwx(void)
 {
 	ptdump_walk_pgd_level_core(NULL, NULL, true);
 }
 
-#ifdef CONFIG_X86_PTDUMP
-static int ptdump_show(struct seq_file *m, void *v)
-{
-	ptdump_walk_pgd_level(m, NULL);
-	return 0;
-}
-
-static int ptdump_open(struct inode *inode, struct file *filp)
+static int __init pt_dump_init(void)
 {
-	return single_open(filp, ptdump_show, NULL);
-}
-
-static const struct file_operations ptdump_fops = {
-	.open		= ptdump_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-#endif
-
-static int pt_dump_init(void)
-{
-#ifdef CONFIG_X86_PTDUMP
-	struct dentry *pe;
-#endif
-
 #ifdef CONFIG_X86_32
 	/* Not a compile-time constant on x86-32 */
 	address_markers[VMALLOC_START_NR].start_address = VMALLOC_START;
@@ -453,13 +444,6 @@ static int pt_dump_init(void)
 	address_markers[FIXADDR_START_NR].start_address = FIXADDR_START;
 #endif
 
-#ifdef CONFIG_X86_PTDUMP
-	pe = debugfs_create_file("kernel_page_tables", 0600, NULL, NULL,
-				 &ptdump_fops);
-	if (!pe)
-		return -ENOMEM;
-#endif
-
 	return 0;
 }
 
diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c
index 903ec1e9c326..82447b3fba38 100644
--- a/arch/x86/mm/extable.c
+++ b/arch/x86/mm/extable.c
@@ -1,23 +1,64 @@
 #include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/sort.h>
 #include <asm/uaccess.h>
 
-static inline unsigned long
-ex_insn_addr(const struct exception_table_entry *x)
-{
-	return (unsigned long)&x->insn + x->insn;
-}
+typedef bool (*ex_handler_t)(const struct exception_table_entry *,
+			    struct pt_regs *, int);
+
 static inline unsigned long
 ex_fixup_addr(const struct exception_table_entry *x)
 {
 	return (unsigned long)&x->fixup + x->fixup;
 }
+static inline ex_handler_t
+ex_fixup_handler(const struct exception_table_entry *x)
+{
+	return (ex_handler_t)((unsigned long)&x->handler + x->handler);
+}
 
-int fixup_exception(struct pt_regs *regs)
+bool ex_handler_default(const struct exception_table_entry *fixup,
+		       struct pt_regs *regs, int trapnr)
 {
-	const struct exception_table_entry *fixup;
-	unsigned long new_ip;
+	regs->ip = ex_fixup_addr(fixup);
+	return true;
+}
+EXPORT_SYMBOL(ex_handler_default);
+
+bool ex_handler_fault(const struct exception_table_entry *fixup,
+		     struct pt_regs *regs, int trapnr)
+{
+	regs->ip = ex_fixup_addr(fixup);
+	regs->ax = trapnr;
+	return true;
+}
+EXPORT_SYMBOL_GPL(ex_handler_fault);
+
+bool ex_handler_ext(const struct exception_table_entry *fixup,
+		   struct pt_regs *regs, int trapnr)
+{
+	/* Special hack for uaccess_err */
+	current_thread_info()->uaccess_err = 1;
+	regs->ip = ex_fixup_addr(fixup);
+	return true;
+}
+EXPORT_SYMBOL(ex_handler_ext);
+
+bool ex_has_fault_handler(unsigned long ip)
+{
+	const struct exception_table_entry *e;
+	ex_handler_t handler;
+
+	e = search_exception_tables(ip);
+	if (!e)
+		return false;
+	handler = ex_fixup_handler(e);
+
+	return handler == ex_handler_fault;
+}
+
+int fixup_exception(struct pt_regs *regs, int trapnr)
+{
+	const struct exception_table_entry *e;
+	ex_handler_t handler;
 
 #ifdef CONFIG_PNPBIOS
 	if (unlikely(SEGMENT_IS_PNP_CODE(regs->cs))) {
@@ -33,137 +74,32 @@ int fixup_exception(struct pt_regs *regs)
 	}
 #endif
 
-	fixup = search_exception_tables(regs->ip);
-	if (fixup) {
-		new_ip = ex_fixup_addr(fixup);
-
-		if (fixup->fixup - fixup->insn >= 0x7ffffff0 - 4) {
-			/* Special hack for uaccess_err */
-			current_thread_info()->uaccess_err = 1;
-			new_ip -= 0x7ffffff0;
-		}
-		regs->ip = new_ip;
-		return 1;
-	}
+	e = search_exception_tables(regs->ip);
+	if (!e)
+		return 0;
 
-	return 0;
+	handler = ex_fixup_handler(e);
+	return handler(e, regs, trapnr);
 }
 
 /* Restricted version used during very early boot */
 int __init early_fixup_exception(unsigned long *ip)
 {
-	const struct exception_table_entry *fixup;
+	const struct exception_table_entry *e;
 	unsigned long new_ip;
+	ex_handler_t handler;
 
-	fixup = search_exception_tables(*ip);
-	if (fixup) {
-		new_ip = ex_fixup_addr(fixup);
-
-		if (fixup->fixup - fixup->insn >= 0x7ffffff0 - 4) {
-			/* uaccess handling not supported during early boot */
-			return 0;
-		}
-
-		*ip = new_ip;
-		return 1;
-	}
-
-	return 0;
-}
-
-/*
- * Search one exception table for an entry corresponding to the
- * given instruction address, and return the address of the entry,
- * or NULL if none is found.
- * We use a binary search, and thus we assume that the table is
- * already sorted.
- */
-const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
-	       const struct exception_table_entry *last,
-	       unsigned long value)
-{
-	while (first <= last) {
-		const struct exception_table_entry *mid;
-		unsigned long addr;
-
-		mid = ((last - first) >> 1) + first;
-		addr = ex_insn_addr(mid);
-		if (addr < value)
-			first = mid + 1;
-		else if (addr > value)
-			last = mid - 1;
-		else
-			return mid;
-        }
-        return NULL;
-}
-
-/*
- * The exception table needs to be sorted so that the binary
- * search that we use to find entries in it works properly.
- * This is used both for the kernel exception table and for
- * the exception tables of modules that get loaded.
- *
- */
-static int cmp_ex(const void *a, const void *b)
-{
-	const struct exception_table_entry *x = a, *y = b;
-
-	/*
-	 * This value will always end up fittin in an int, because on
-	 * both i386 and x86-64 the kernel symbol-reachable address
-	 * space is < 2 GiB.
-	 *
-	 * This compare is only valid after normalization.
-	 */
-	return x->insn - y->insn;
-}
-
-void sort_extable(struct exception_table_entry *start,
-		  struct exception_table_entry *finish)
-{
-	struct exception_table_entry *p;
-	int i;
-
-	/* Convert all entries to being relative to the start of the section */
-	i = 0;
-	for (p = start; p < finish; p++) {
-		p->insn += i;
-		i += 4;
-		p->fixup += i;
-		i += 4;
-	}
+	e = search_exception_tables(*ip);
+	if (!e)
+		return 0;
 
-	sort(start, finish - start, sizeof(struct exception_table_entry),
-	     cmp_ex, NULL);
+	new_ip  = ex_fixup_addr(e);
+	handler = ex_fixup_handler(e);
 
-	/* Denormalize all entries */
-	i = 0;
-	for (p = start; p < finish; p++) {
-		p->insn -= i;
-		i += 4;
-		p->fixup -= i;
-		i += 4;
-	}
-}
+	/* special handling not supported during early boot */
+	if (handler != ex_handler_default)
+		return 0;
 
-#ifdef CONFIG_MODULES
-/*
- * If the exception table is sorted, any referring to the module init
- * will be at the beginning or the end.
- */
-void trim_init_extable(struct module *m)
-{
-	/*trim the beginning*/
-	while (m->num_exentries &&
-	       within_module_init(ex_insn_addr(&m->extable[0]), m)) {
-		m->extable++;
-		m->num_exentries--;
-	}
-	/*trim the end*/
-	while (m->num_exentries &&
-	       within_module_init(ex_insn_addr(&m->extable[m->num_exentries-1]), m))
-		m->num_exentries--;
+	*ip = new_ip;
+	return 1;
 }
-#endif /* CONFIG_MODULES */
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index eef44d9a3f77..5ce1ed02f7e8 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -15,12 +15,14 @@
 #include <linux/context_tracking.h>	/* exception_enter(), ...	*/
 #include <linux/uaccess.h>		/* faulthandler_disabled()	*/
 
+#include <asm/cpufeature.h>		/* boot_cpu_has, ...		*/
 #include <asm/traps.h>			/* dotraplinkage, ...		*/
 #include <asm/pgalloc.h>		/* pgd_*(), ...			*/
 #include <asm/kmemcheck.h>		/* kmemcheck_*(), ...		*/
 #include <asm/fixmap.h>			/* VSYSCALL_ADDR		*/
 #include <asm/vsyscall.h>		/* emulate_vsyscall		*/
 #include <asm/vm86.h>			/* struct vm86			*/
+#include <asm/mmu_context.h>		/* vma_pkey()			*/
 
 #define CREATE_TRACE_POINTS
 #include <asm/trace/exceptions.h>
@@ -33,6 +35,7 @@
  *   bit 2 ==	 0: kernel-mode access	1: user-mode access
  *   bit 3 ==				1: use of reserved bit detected
  *   bit 4 ==				1: fault was an instruction fetch
+ *   bit 5 ==				1: protection keys block access
  */
 enum x86_pf_error_code {
 
@@ -41,6 +44,7 @@ enum x86_pf_error_code {
 	PF_USER		=		1 << 2,
 	PF_RSVD		=		1 << 3,
 	PF_INSTR	=		1 << 4,
+	PF_PK		=		1 << 5,
 };
 
 /*
@@ -167,9 +171,60 @@ is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
 	return prefetch;
 }
 
+/*
+ * A protection key fault means that the PKRU value did not allow
+ * access to some PTE.  Userspace can figure out what PKRU was
+ * from the XSAVE state, and this function fills out a field in
+ * siginfo so userspace can discover which protection key was set
+ * on the PTE.
+ *
+ * If we get here, we know that the hardware signaled a PF_PK
+ * fault and that there was a VMA once we got in the fault
+ * handler.  It does *not* guarantee that the VMA we find here
+ * was the one that we faulted on.
+ *
+ * 1. T1   : mprotect_key(foo, PAGE_SIZE, pkey=4);
+ * 2. T1   : set PKRU to deny access to pkey=4, touches page
+ * 3. T1   : faults...
+ * 4.    T2: mprotect_key(foo, PAGE_SIZE, pkey=5);
+ * 5. T1   : enters fault handler, takes mmap_sem, etc...
+ * 6. T1   : reaches here, sees vma_pkey(vma)=5, when we really
+ *	     faulted on a pte with its pkey=4.
+ */
+static void fill_sig_info_pkey(int si_code, siginfo_t *info,
+		struct vm_area_struct *vma)
+{
+	/* This is effectively an #ifdef */
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return;
+
+	/* Fault not from Protection Keys: nothing to do */
+	if (si_code != SEGV_PKUERR)
+		return;
+	/*
+	 * force_sig_info_fault() is called from a number of
+	 * contexts, some of which have a VMA and some of which
+	 * do not.  The PF_PK handing happens after we have a
+	 * valid VMA, so we should never reach this without a
+	 * valid VMA.
+	 */
+	if (!vma) {
+		WARN_ONCE(1, "PKU fault with no VMA passed in");
+		info->si_pkey = 0;
+		return;
+	}
+	/*
+	 * si_pkey should be thought of as a strong hint, but not
+	 * absolutely guranteed to be 100% accurate because of
+	 * the race explained above.
+	 */
+	info->si_pkey = vma_pkey(vma);
+}
+
 static void
 force_sig_info_fault(int si_signo, int si_code, unsigned long address,
-		     struct task_struct *tsk, int fault)
+		     struct task_struct *tsk, struct vm_area_struct *vma,
+		     int fault)
 {
 	unsigned lsb = 0;
 	siginfo_t info;
@@ -184,6 +239,8 @@ force_sig_info_fault(int si_signo, int si_code, unsigned long address,
 		lsb = PAGE_SHIFT;
 	info.si_addr_lsb = lsb;
 
+	fill_sig_info_pkey(si_code, &info, vma);
+
 	force_sig_info(si_signo, &info, tsk);
 }
 
@@ -287,6 +344,9 @@ static noinline int vmalloc_fault(unsigned long address)
 	if (!pmd_k)
 		return -1;
 
+	if (pmd_huge(*pmd_k))
+		return 0;
+
 	pte_k = pte_offset_kernel(pmd_k, address);
 	if (!pte_present(*pte_k))
 		return -1;
@@ -360,8 +420,6 @@ void vmalloc_sync_all(void)
  * 64-bit:
  *
  *   Handle a fault on the vmalloc area
- *
- * This assumes no large pages in there.
  */
 static noinline int vmalloc_fault(unsigned long address)
 {
@@ -403,17 +461,23 @@ static noinline int vmalloc_fault(unsigned long address)
 	if (pud_none(*pud_ref))
 		return -1;
 
-	if (pud_none(*pud) || pud_page_vaddr(*pud) != pud_page_vaddr(*pud_ref))
+	if (pud_none(*pud) || pud_pfn(*pud) != pud_pfn(*pud_ref))
 		BUG();
 
+	if (pud_huge(*pud))
+		return 0;
+
 	pmd = pmd_offset(pud, address);
 	pmd_ref = pmd_offset(pud_ref, address);
 	if (pmd_none(*pmd_ref))
 		return -1;
 
-	if (pmd_none(*pmd) || pmd_page(*pmd) != pmd_page(*pmd_ref))
+	if (pmd_none(*pmd) || pmd_pfn(*pmd) != pmd_pfn(*pmd_ref))
 		BUG();
 
+	if (pmd_huge(*pmd))
+		return 0;
+
 	pte_ref = pte_offset_kernel(pmd_ref, address);
 	if (!pte_present(*pte_ref))
 		return -1;
@@ -654,9 +718,11 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 	struct task_struct *tsk = current;
 	unsigned long flags;
 	int sig;
+	/* No context means no VMA to pass down */
+	struct vm_area_struct *vma = NULL;
 
 	/* Are we prepared to handle this kernel fault? */
-	if (fixup_exception(regs)) {
+	if (fixup_exception(regs, X86_TRAP_PF)) {
 		/*
 		 * Any interrupt that takes a fault gets the fixup. This makes
 		 * the below recursive fault logic only apply to a faults from
@@ -677,7 +743,8 @@ no_context(struct pt_regs *regs, unsigned long error_code,
 			tsk->thread.cr2 = address;
 
 			/* XXX: hwpoison faults will set the wrong code. */
-			force_sig_info_fault(signal, si_code, address, tsk, 0);
+			force_sig_info_fault(signal, si_code, address,
+					     tsk, vma, 0);
 		}
 
 		/*
@@ -754,7 +821,8 @@ show_signal_msg(struct pt_regs *regs, unsigned long error_code,
 
 static void
 __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
-		       unsigned long address, int si_code)
+		       unsigned long address, struct vm_area_struct *vma,
+		       int si_code)
 {
 	struct task_struct *tsk = current;
 
@@ -797,7 +865,7 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 		tsk->thread.error_code	= error_code;
 		tsk->thread.trap_nr	= X86_TRAP_PF;
 
-		force_sig_info_fault(SIGSEGV, si_code, address, tsk, 0);
+		force_sig_info_fault(SIGSEGV, si_code, address, tsk, vma, 0);
 
 		return;
 	}
@@ -810,14 +878,14 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
 
 static noinline void
 bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
-		     unsigned long address)
+		     unsigned long address, struct vm_area_struct *vma)
 {
-	__bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR);
+	__bad_area_nosemaphore(regs, error_code, address, vma, SEGV_MAPERR);
 }
 
 static void
 __bad_area(struct pt_regs *regs, unsigned long error_code,
-	   unsigned long address, int si_code)
+	   unsigned long address,  struct vm_area_struct *vma, int si_code)
 {
 	struct mm_struct *mm = current->mm;
 
@@ -827,25 +895,50 @@ __bad_area(struct pt_regs *regs, unsigned long error_code,
 	 */
 	up_read(&mm->mmap_sem);
 
-	__bad_area_nosemaphore(regs, error_code, address, si_code);
+	__bad_area_nosemaphore(regs, error_code, address, vma, si_code);
 }
 
 static noinline void
 bad_area(struct pt_regs *regs, unsigned long error_code, unsigned long address)
 {
-	__bad_area(regs, error_code, address, SEGV_MAPERR);
+	__bad_area(regs, error_code, address, NULL, SEGV_MAPERR);
+}
+
+static inline bool bad_area_access_from_pkeys(unsigned long error_code,
+		struct vm_area_struct *vma)
+{
+	/* This code is always called on the current mm */
+	bool foreign = false;
+
+	if (!boot_cpu_has(X86_FEATURE_OSPKE))
+		return false;
+	if (error_code & PF_PK)
+		return true;
+	/* this checks permission keys on the VMA: */
+	if (!arch_vma_access_permitted(vma, (error_code & PF_WRITE),
+				(error_code & PF_INSTR), foreign))
+		return true;
+	return false;
 }
 
 static noinline void
 bad_area_access_error(struct pt_regs *regs, unsigned long error_code,
-		      unsigned long address)
+		      unsigned long address, struct vm_area_struct *vma)
 {
-	__bad_area(regs, error_code, address, SEGV_ACCERR);
+	/*
+	 * This OSPKE check is not strictly necessary at runtime.
+	 * But, doing it this way allows compiler optimizations
+	 * if pkeys are compiled out.
+	 */
+	if (bad_area_access_from_pkeys(error_code, vma))
+		__bad_area(regs, error_code, address, vma, SEGV_PKUERR);
+	else
+		__bad_area(regs, error_code, address, vma, SEGV_ACCERR);
 }
 
 static void
 do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
-	  unsigned int fault)
+	  struct vm_area_struct *vma, unsigned int fault)
 {
 	struct task_struct *tsk = current;
 	int code = BUS_ADRERR;
@@ -872,12 +965,13 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
 		code = BUS_MCEERR_AR;
 	}
 #endif
-	force_sig_info_fault(SIGBUS, code, address, tsk, fault);
+	force_sig_info_fault(SIGBUS, code, address, tsk, vma, fault);
 }
 
 static noinline void
 mm_fault_error(struct pt_regs *regs, unsigned long error_code,
-	       unsigned long address, unsigned int fault)
+	       unsigned long address, struct vm_area_struct *vma,
+	       unsigned int fault)
 {
 	if (fatal_signal_pending(current) && !(error_code & PF_USER)) {
 		no_context(regs, error_code, address, 0, 0);
@@ -901,9 +995,9 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code,
 	} else {
 		if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON|
 			     VM_FAULT_HWPOISON_LARGE))
-			do_sigbus(regs, error_code, address, fault);
+			do_sigbus(regs, error_code, address, vma, fault);
 		else if (fault & VM_FAULT_SIGSEGV)
-			bad_area_nosemaphore(regs, error_code, address);
+			bad_area_nosemaphore(regs, error_code, address, vma);
 		else
 			BUG();
 	}
@@ -916,6 +1010,12 @@ static int spurious_fault_check(unsigned long error_code, pte_t *pte)
 
 	if ((error_code & PF_INSTR) && !pte_exec(*pte))
 		return 0;
+	/*
+	 * Note: We do not do lazy flushing on protection key
+	 * changes, so no spurious fault will ever set PF_PK.
+	 */
+	if ((error_code & PF_PK))
+		return 1;
 
 	return 1;
 }
@@ -1005,6 +1105,17 @@ int show_unhandled_signals = 1;
 static inline int
 access_error(unsigned long error_code, struct vm_area_struct *vma)
 {
+	/* This is only called for the current mm, so: */
+	bool foreign = false;
+	/*
+	 * Make sure to check the VMA so that we do not perform
+	 * faults just to hit a PF_PK as soon as we fill in a
+	 * page.
+	 */
+	if (!arch_vma_access_permitted(vma, (error_code & PF_WRITE),
+				(error_code & PF_INSTR), foreign))
+		return 1;
+
 	if (error_code & PF_WRITE) {
 		/* write, present and write, not present: */
 		if (unlikely(!(vma->vm_flags & VM_WRITE)))
@@ -1111,7 +1222,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code,
 		 * Don't take the mm semaphore here. If we fixup a prefetch
 		 * fault we could otherwise deadlock:
 		 */
-		bad_area_nosemaphore(regs, error_code, address);
+		bad_area_nosemaphore(regs, error_code, address, NULL);
 
 		return;
 	}
@@ -1124,7 +1235,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code,
 		pgtable_bad(regs, error_code, address);
 
 	if (unlikely(smap_violation(error_code, regs))) {
-		bad_area_nosemaphore(regs, error_code, address);
+		bad_area_nosemaphore(regs, error_code, address, NULL);
 		return;
 	}
 
@@ -1133,7 +1244,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code,
 	 * in a region with pagefaults disabled then we must not take the fault
 	 */
 	if (unlikely(faulthandler_disabled() || !mm)) {
-		bad_area_nosemaphore(regs, error_code, address);
+		bad_area_nosemaphore(regs, error_code, address, NULL);
 		return;
 	}
 
@@ -1157,6 +1268,8 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code,
 
 	if (error_code & PF_WRITE)
 		flags |= FAULT_FLAG_WRITE;
+	if (error_code & PF_INSTR)
+		flags |= FAULT_FLAG_INSTRUCTION;
 
 	/*
 	 * When running in the kernel we expect faults to occur only to
@@ -1177,7 +1290,7 @@ __do_page_fault(struct pt_regs *regs, unsigned long error_code,
 	if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
 		if ((error_code & PF_USER) == 0 &&
 		    !search_exception_tables(regs->ip)) {
-			bad_area_nosemaphore(regs, error_code, address);
+			bad_area_nosemaphore(regs, error_code, address, NULL);
 			return;
 		}
 retry:
@@ -1225,7 +1338,7 @@ retry:
 	 */
 good_area:
 	if (unlikely(access_error(error_code, vma))) {
-		bad_area_access_error(regs, error_code, address);
+		bad_area_access_error(regs, error_code, address, vma);
 		return;
 	}
 
@@ -1263,7 +1376,7 @@ good_area:
 
 	up_read(&mm->mmap_sem);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
-		mm_fault_error(regs, error_code, address, fault);
+		mm_fault_error(regs, error_code, address, vma, fault);
 		return;
 	}
 
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
index ae9a37bf1371..b8b6a60b32cf 100644
--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -9,7 +9,9 @@
 #include <linux/vmstat.h>
 #include <linux/highmem.h>
 #include <linux/swap.h>
+#include <linux/memremap.h>
 
+#include <asm/mmu_context.h>
 #include <asm/pgtable.h>
 
 static inline pte_t gup_get_pte(pte_t *ptep)
@@ -63,6 +65,38 @@ retry:
 #endif
 }
 
+static void undo_dev_pagemap(int *nr, int nr_start, struct page **pages)
+{
+	while ((*nr) - nr_start) {
+		struct page *page = pages[--(*nr)];
+
+		ClearPageReferenced(page);
+		put_page(page);
+	}
+}
+
+/*
+ * 'pteval' can come from a pte, pmd or pud.  We only check
+ * _PAGE_PRESENT, _PAGE_USER, and _PAGE_RW in here which are the
+ * same value on all 3 types.
+ */
+static inline int pte_allows_gup(unsigned long pteval, int write)
+{
+	unsigned long need_pte_bits = _PAGE_PRESENT|_PAGE_USER;
+
+	if (write)
+		need_pte_bits |= _PAGE_RW;
+
+	if ((pteval & need_pte_bits) != need_pte_bits)
+		return 0;
+
+	/* Check memory protection keys permissions. */
+	if (!__pkru_allows_pkey(pte_flags_pkey(pteval), write))
+		return 0;
+
+	return 1;
+}
+
 /*
  * The performance critical leaf functions are made noinline otherwise gcc
  * inlines everything into a single function which results in too much
@@ -71,13 +105,10 @@ retry:
 static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
-	unsigned long mask;
+	struct dev_pagemap *pgmap = NULL;
+	int nr_start = *nr;
 	pte_t *ptep;
 
-	mask = _PAGE_PRESENT|_PAGE_USER;
-	if (write)
-		mask |= _PAGE_RW;
-
 	ptep = pte_offset_map(&pmd, addr);
 	do {
 		pte_t pte = gup_get_pte(ptep);
@@ -89,13 +120,22 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
 			return 0;
 		}
 
-		if ((pte_flags(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+		if (pte_devmap(pte)) {
+			pgmap = get_dev_pagemap(pte_pfn(pte), pgmap);
+			if (unlikely(!pgmap)) {
+				undo_dev_pagemap(nr, nr_start, pages);
+				pte_unmap(ptep);
+				return 0;
+			}
+		} else if (!pte_allows_gup(pte_val(pte), write) ||
+			   pte_special(pte)) {
 			pte_unmap(ptep);
 			return 0;
 		}
 		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 		page = pte_page(pte);
 		get_page(page);
+		put_dev_pagemap(pgmap);
 		SetPageReferenced(page);
 		pages[*nr] = page;
 		(*nr)++;
@@ -110,25 +150,51 @@ static inline void get_head_page_multiple(struct page *page, int nr)
 {
 	VM_BUG_ON_PAGE(page != compound_head(page), page);
 	VM_BUG_ON_PAGE(page_count(page) == 0, page);
-	atomic_add(nr, &page->_count);
+	page_ref_add(page, nr);
 	SetPageReferenced(page);
 }
 
+static int __gup_device_huge_pmd(pmd_t pmd, unsigned long addr,
+		unsigned long end, struct page **pages, int *nr)
+{
+	int nr_start = *nr;
+	unsigned long pfn = pmd_pfn(pmd);
+	struct dev_pagemap *pgmap = NULL;
+
+	pfn += (addr & ~PMD_MASK) >> PAGE_SHIFT;
+	do {
+		struct page *page = pfn_to_page(pfn);
+
+		pgmap = get_dev_pagemap(pfn, pgmap);
+		if (unlikely(!pgmap)) {
+			undo_dev_pagemap(nr, nr_start, pages);
+			return 0;
+		}
+		SetPageReferenced(page);
+		pages[*nr] = page;
+		get_page(page);
+		put_dev_pagemap(pgmap);
+		(*nr)++;
+		pfn++;
+	} while (addr += PAGE_SIZE, addr != end);
+	return 1;
+}
+
 static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
-	unsigned long mask;
 	struct page *head, *page;
 	int refs;
 
-	mask = _PAGE_PRESENT|_PAGE_USER;
-	if (write)
-		mask |= _PAGE_RW;
-	if ((pmd_flags(pmd) & mask) != mask)
+	if (!pte_allows_gup(pmd_val(pmd), write))
 		return 0;
+
+	VM_BUG_ON(!pfn_valid(pmd_pfn(pmd)));
+	if (pmd_devmap(pmd))
+		return __gup_device_huge_pmd(pmd, addr, end, pages, nr);
+
 	/* hugepages are never "special" */
 	VM_BUG_ON(pmd_flags(pmd) & _PAGE_SPECIAL);
-	VM_BUG_ON(!pfn_valid(pmd_pfn(pmd)));
 
 	refs = 0;
 	head = pmd_page(pmd);
@@ -136,8 +202,6 @@ static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);
 		pages[*nr] = page;
-		if (PageTail(page))
-			get_huge_page_tail(page);
 		(*nr)++;
 		page++;
 		refs++;
@@ -158,18 +222,7 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
 		pmd_t pmd = *pmdp;
 
 		next = pmd_addr_end(addr, end);
-		/*
-		 * The pmd_trans_splitting() check below explains why
-		 * pmdp_splitting_flush has to flush the tlb, to stop
-		 * this gup-fast code from running while we set the
-		 * splitting bit in the pmd. Returning zero will take
-		 * the slow path that will call wait_split_huge_page()
-		 * if the pmd is still in splitting state. gup-fast
-		 * can't because it has irq disabled and
-		 * wait_split_huge_page() would never return as the
-		 * tlb flush IPI wouldn't run.
-		 */
-		if (pmd_none(pmd) || pmd_trans_splitting(pmd))
+		if (pmd_none(pmd))
 			return 0;
 		if (unlikely(pmd_large(pmd) || !pmd_present(pmd))) {
 			/*
@@ -193,14 +246,10 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
 static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
-	unsigned long mask;
 	struct page *head, *page;
 	int refs;
 
-	mask = _PAGE_PRESENT|_PAGE_USER;
-	if (write)
-		mask |= _PAGE_RW;
-	if ((pud_flags(pud) & mask) != mask)
+	if (!pte_allows_gup(pud_val(pud), write))
 		return 0;
 	/* hugepages are never "special" */
 	VM_BUG_ON(pud_flags(pud) & _PAGE_SPECIAL);
@@ -212,8 +261,6 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
 	do {
 		VM_BUG_ON_PAGE(compound_head(page) != head, page);
 		pages[*nr] = page;
-		if (PageTail(page))
-			get_huge_page_tail(page);
 		(*nr)++;
 		page++;
 		refs++;
@@ -386,7 +433,7 @@ slow_irqon:
 		start += nr << PAGE_SHIFT;
 		pages += nr;
 
-		ret = get_user_pages_unlocked(current, mm, start,
+		ret = get_user_pages_unlocked(start,
 					      (end - start) >> PAGE_SHIFT,
 					      write, 0, pages);
 
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index eecb207a2037..a6d739258137 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -104,20 +104,6 @@ void __kunmap_atomic(void *kvaddr)
 }
 EXPORT_SYMBOL(__kunmap_atomic);
 
-struct page *kmap_atomic_to_page(void *ptr)
-{
-	unsigned long idx, vaddr = (unsigned long)ptr;
-	pte_t *pte;
-
-	if (vaddr < FIXADDR_START)
-		return virt_to_page(ptr);
-
-	idx = virt_to_fix(vaddr);
-	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
-	return pte_page(*pte);
-}
-EXPORT_SYMBOL(kmap_atomic_to_page);
-
 void __init set_highmem_pages_init(void)
 {
 	struct zone *zone;
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 42982b26e32b..740d7ac03a55 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -173,10 +173,10 @@ static __init int setup_hugepagesz(char *opt)
 }
 __setup("hugepagesz=", setup_hugepagesz);
 
-#ifdef CONFIG_CMA
+#if (defined(CONFIG_MEMORY_ISOLATION) && defined(CONFIG_COMPACTION)) || defined(CONFIG_CMA)
 static __init int gigantic_pages_init(void)
 {
-	/* With CMA we can allocate gigantic pages at runtime */
+	/* With compaction or CMA we can allocate gigantic pages at runtime */
 	if (cpu_has_gbpages && !size_to_hstate(1UL << PUD_SHIFT))
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
 	return 0;
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 1f37cb2b56a9..9d56f271d519 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -150,13 +150,14 @@ static int page_size_mask;
 
 static void __init probe_page_size_mask(void)
 {
-#if !defined(CONFIG_DEBUG_PAGEALLOC) && !defined(CONFIG_KMEMCHECK)
+#if !defined(CONFIG_KMEMCHECK)
 	/*
-	 * For CONFIG_DEBUG_PAGEALLOC, identity mapping will use small pages.
+	 * For CONFIG_KMEMCHECK or pagealloc debugging, identity mapping will
+	 * use small pages.
 	 * This will simplify cpa(), which otherwise needs to support splitting
 	 * large pages into small in interrupt context, etc.
 	 */
-	if (cpu_has_pse)
+	if (cpu_has_pse && !debug_pagealloc_enabled())
 		page_size_mask |= 1 << PG_LEVEL_2M;
 #endif
 
@@ -354,7 +355,7 @@ static int __meminit split_mem_range(struct map_range *mr, int nr_range,
 	}
 
 	for (i = 0; i < nr_range; i++)
-		printk(KERN_DEBUG " [mem %#010lx-%#010lx] page %s\n",
+		pr_debug(" [mem %#010lx-%#010lx] page %s\n",
 				mr[i].start, mr[i].end - 1,
 				page_size_string(&mr[i]));
 
@@ -401,7 +402,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 	unsigned long ret = 0;
 	int nr_range, i;
 
-	pr_info("init_memory_mapping: [mem %#010lx-%#010lx]\n",
+	pr_debug("init_memory_mapping: [mem %#010lx-%#010lx]\n",
 	       start, end - 1);
 
 	memset(mr, 0, sizeof(mr));
@@ -666,21 +667,22 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	 * mark them not present - any buggy init-section access will
 	 * create a kernel page fault:
 	 */
-#ifdef CONFIG_DEBUG_PAGEALLOC
-	printk(KERN_INFO "debug: unmapping init [mem %#010lx-%#010lx]\n",
-		begin, end - 1);
-	set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
-#else
-	/*
-	 * We just marked the kernel text read only above, now that
-	 * we are going to free part of that, we need to make that
-	 * writeable and non-executable first.
-	 */
-	set_memory_nx(begin, (end - begin) >> PAGE_SHIFT);
-	set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
+	if (debug_pagealloc_enabled()) {
+		pr_info("debug: unmapping init [mem %#010lx-%#010lx]\n",
+			begin, end - 1);
+		set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
+	} else {
+		/*
+		 * We just marked the kernel text read only above, now that
+		 * we are going to free part of that, we need to make that
+		 * writeable and non-executable first.
+		 */
+		set_memory_nx(begin, (end - begin) >> PAGE_SHIFT);
+		set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
 
-	free_reserved_area((void *)begin, (void *)end, POISON_FREE_INITMEM, what);
-#endif
+		free_reserved_area((void *)begin, (void *)end,
+				   POISON_FREE_INITMEM, what);
+	}
 }
 
 void free_initmem(void)
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index cb4ef3de61f9..bd7a9b9e2e14 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -388,7 +388,6 @@ repeat:
 }
 
 pte_t *kmap_pte;
-pgprot_t kmap_prot;
 
 static inline pte_t *kmap_get_fixmap_pte(unsigned long vaddr)
 {
@@ -405,8 +404,6 @@ static void __init kmap_init(void)
 	 */
 	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
 	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
-	kmap_prot = PAGE_KERNEL;
 }
 
 #ifdef CONFIG_HIGHMEM
@@ -871,7 +868,6 @@ static noinline int do_test_wp_bit(void)
 	return flag;
 }
 
-#ifdef CONFIG_DEBUG_RODATA
 const int rodata_test_data = 0xC3;
 EXPORT_SYMBOL_GPL(rodata_test_data);
 
@@ -960,5 +956,3 @@ void mark_rodata_ro(void)
 	if (__supported_pte_mask & _PAGE_NX)
 		debug_checkwx();
 }
-#endif
-
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 5ed62eff31bd..214afda97911 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/memory.h>
 #include <linux/memory_hotplug.h>
+#include <linux/memremap.h>
 #include <linux/nmi.h>
 #include <linux/gfp.h>
 #include <linux/kcore.h>
@@ -52,6 +53,7 @@
 #include <asm/numa.h>
 #include <asm/cacheflush.h>
 #include <asm/init.h>
+#include <asm/uv/uv.h>
 #include <asm/setup.h>
 
 #include "mm_internal.h"
@@ -714,6 +716,12 @@ static void __meminit free_pagetable(struct page *page, int order)
 {
 	unsigned long magic;
 	unsigned int nr_pages = 1 << order;
+	struct vmem_altmap *altmap = to_vmem_altmap((unsigned long) page);
+
+	if (altmap) {
+		vmem_altmap_free(altmap, nr_pages);
+		return;
+	}
 
 	/* bootmem page has reserved flag */
 	if (PageReserved(page)) {
@@ -814,8 +822,7 @@ remove_pte_table(pte_t *pte_start, unsigned long addr, unsigned long end,
 		if (phys_addr < (phys_addr_t)0x40000000)
 			return;
 
-		if (IS_ALIGNED(addr, PAGE_SIZE) &&
-		    IS_ALIGNED(next, PAGE_SIZE)) {
+		if (PAGE_ALIGNED(addr) && PAGE_ALIGNED(next)) {
 			/*
 			 * Do not free direct mapping pages since they were
 			 * freed when offlining, or simplely not in use.
@@ -1018,13 +1025,19 @@ int __ref arch_remove_memory(u64 start, u64 size)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
+	struct page *page = pfn_to_page(start_pfn);
+	struct vmem_altmap *altmap;
 	struct zone *zone;
 	int ret;
 
-	zone = page_zone(pfn_to_page(start_pfn));
-	kernel_physical_mapping_remove(start, start + size);
+	/* With altmap the first mapped page is offset from @start */
+	altmap = to_vmem_altmap((unsigned long) page);
+	if (altmap)
+		page += vmem_altmap_offset(altmap);
+	zone = page_zone(page);
 	ret = __remove_pages(zone, start_pfn, nr_pages);
 	WARN_ON_ONCE(ret);
+	kernel_physical_mapping_remove(start, start + size);
 
 	return ret;
 }
@@ -1062,7 +1075,6 @@ void __init mem_init(void)
 	mem_init_print_info(NULL);
 }
 
-#ifdef CONFIG_DEBUG_RODATA
 const int rodata_test_data = 0xC3;
 EXPORT_SYMBOL_GPL(rodata_test_data);
 
@@ -1154,8 +1166,6 @@ void mark_rodata_ro(void)
 	debug_checkwx();
 }
 
-#endif
-
 int kern_addr_valid(unsigned long addr)
 {
 	unsigned long above = ((long)addr) >> __VIRTUAL_MASK_SHIFT;
@@ -1194,26 +1204,13 @@ int kern_addr_valid(unsigned long addr)
 
 static unsigned long probe_memory_block_size(void)
 {
-	/* start from 2g */
-	unsigned long bz = 1UL<<31;
+	unsigned long bz = MIN_MEMORY_BLOCK_SIZE;
 
-	if (totalram_pages >= (64ULL << (30 - PAGE_SHIFT))) {
-		pr_info("Using 2GB memory block size for large-memory system\n");
-		return 2UL * 1024 * 1024 * 1024;
-	}
-
-	/* less than 64g installed */
-	if ((max_pfn << PAGE_SHIFT) < (16UL << 32))
-		return MIN_MEMORY_BLOCK_SIZE;
-
-	/* get the tail size */
-	while (bz > MIN_MEMORY_BLOCK_SIZE) {
-		if (!((max_pfn << PAGE_SHIFT) & (bz - 1)))
-			break;
-		bz >>= 1;
-	}
+	/* if system is UV or has 64GB of RAM or more, use large blocks */
+	if (is_uv_system() || ((max_pfn << PAGE_SHIFT) >= (64UL << 30)))
+		bz = 2UL << 30; /* 2GB */
 
-	printk(KERN_DEBUG "memory block size : %ldMB\n", bz >> 20);
+	pr_info("x86/mm: Memory block size: %ldMB\n", bz >> 20);
 
 	return bz;
 }
@@ -1236,7 +1233,7 @@ static void __meminitdata *p_start, *p_end;
 static int __meminitdata node_start;
 
 static int __meminit vmemmap_populate_hugepages(unsigned long start,
-						unsigned long end, int node)
+		unsigned long end, int node, struct vmem_altmap *altmap)
 {
 	unsigned long addr;
 	unsigned long next;
@@ -1259,7 +1256,7 @@ static int __meminit vmemmap_populate_hugepages(unsigned long start,
 		if (pmd_none(*pmd)) {
 			void *p;
 
-			p = vmemmap_alloc_block_buf(PMD_SIZE, node);
+			p = __vmemmap_alloc_block_buf(PMD_SIZE, node, altmap);
 			if (p) {
 				pte_t entry;
 
@@ -1270,7 +1267,7 @@ static int __meminit vmemmap_populate_hugepages(unsigned long start,
 				/* check to see if we have contiguous blocks */
 				if (p_end != p || node_start != node) {
 					if (p_start)
-						printk(KERN_DEBUG " [%lx-%lx] PMD -> [%p-%p] on node %d\n",
+						pr_debug(" [%lx-%lx] PMD -> [%p-%p] on node %d\n",
 						       addr_start, addr_end-1, p_start, p_end-1, node_start);
 					addr_start = addr;
 					node_start = node;
@@ -1280,7 +1277,8 @@ static int __meminit vmemmap_populate_hugepages(unsigned long start,
 				addr_end = addr + PMD_SIZE;
 				p_end = p + PMD_SIZE;
 				continue;
-			}
+			} else if (altmap)
+				return -ENOMEM; /* no fallback */
 		} else if (pmd_large(*pmd)) {
 			vmemmap_verify((pte_t *)pmd, node, addr, next);
 			continue;
@@ -1294,11 +1292,16 @@ static int __meminit vmemmap_populate_hugepages(unsigned long start,
 
 int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node)
 {
+	struct vmem_altmap *altmap = to_vmem_altmap(start);
 	int err;
 
 	if (cpu_has_pse)
-		err = vmemmap_populate_hugepages(start, end, node);
-	else
+		err = vmemmap_populate_hugepages(start, end, node, altmap);
+	else if (altmap) {
+		pr_err_once("%s: no cpu support for altmap allocations\n",
+				__func__);
+		err = -ENOMEM;
+	} else
 		err = vmemmap_populate_basepages(start, end, node);
 	if (!err)
 		sync_global_pgds(start, end - 1, 0);
@@ -1368,7 +1371,7 @@ void register_page_bootmem_memmap(unsigned long section_nr,
 void __meminit vmemmap_populate_print_last(void)
 {
 	if (p_start) {
-		printk(KERN_DEBUG " [%lx-%lx] PMD -> [%p-%p] on node %d\n",
+		pr_debug(" [%lx-%lx] PMD -> [%p-%p] on node %d\n",
 			addr_start, addr_end-1, p_start, p_end-1, node_start);
 		p_start = NULL;
 		p_end = NULL;
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index b9c78f3bcd67..0d8d53d1f5cc 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -194,8 +194,8 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	 * Check if the request spans more than any BAR in the iomem resource
 	 * tree.
 	 */
-	WARN_ONCE(iomem_map_sanity_check(unaligned_phys_addr, unaligned_size),
-		  KERN_INFO "Info: mapping multiple BARs. Your kernel is fine.");
+	if (iomem_map_sanity_check(unaligned_phys_addr, unaligned_size))
+		pr_warn("caller %pS mapping multiple BARs\n", caller);
 
 	return ret_addr;
 err_free_area:
diff --git a/arch/x86/mm/kasan_init_64.c b/arch/x86/mm/kasan_init_64.c
index d470cf219a2d..1b1110fa0057 100644
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -120,11 +120,22 @@ void __init kasan_init(void)
 	kasan_populate_zero_shadow(kasan_mem_to_shadow((void *)MODULES_END),
 			(void *)KASAN_SHADOW_END);
 
-	memset(kasan_zero_page, 0, PAGE_SIZE);
-
 	load_cr3(init_level4_pgt);
 	__flush_tlb_all();
-	init_task.kasan_depth = 0;
 
+	/*
+	 * kasan_zero_page has been used as early shadow memory, thus it may
+	 * contain some garbage. Now we can clear and write protect it, since
+	 * after the TLB flush no one should write to it.
+	 */
+	memset(kasan_zero_page, 0, PAGE_SIZE);
+	for (i = 0; i < PTRS_PER_PTE; i++) {
+		pte_t pte = __pte(__pa(kasan_zero_page) | __PAGE_KERNEL_RO);
+		set_pte(&kasan_zero_pte[i], pte);
+	}
+	/* Flush TLBs again to be sure that write protection applied. */
+	__flush_tlb_all();
+
+	init_task.kasan_depth = 0;
 	pr_info("KernelAddressSanitizer initialized\n");
 }
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 637ab34ed632..ddb2244b06a1 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -33,7 +33,7 @@
 struct kmmio_fault_page {
 	struct list_head list;
 	struct kmmio_fault_page *release_next;
-	unsigned long page; /* location of the fault page */
+	unsigned long addr; /* the requested address */
 	pteval_t old_presence; /* page presence prior to arming */
 	bool armed;
 
@@ -70,9 +70,16 @@ unsigned int kmmio_count;
 static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE];
 static LIST_HEAD(kmmio_probes);
 
-static struct list_head *kmmio_page_list(unsigned long page)
+static struct list_head *kmmio_page_list(unsigned long addr)
 {
-	return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)];
+	unsigned int l;
+	pte_t *pte = lookup_address(addr, &l);
+
+	if (!pte)
+		return NULL;
+	addr &= page_level_mask(l);
+
+	return &kmmio_page_table[hash_long(addr, KMMIO_PAGE_HASH_BITS)];
 }
 
 /* Accessed per-cpu */
@@ -98,15 +105,19 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr)
 }
 
 /* You must be holding RCU read lock. */
-static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page)
+static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long addr)
 {
 	struct list_head *head;
 	struct kmmio_fault_page *f;
+	unsigned int l;
+	pte_t *pte = lookup_address(addr, &l);
 
-	page &= PAGE_MASK;
-	head = kmmio_page_list(page);
+	if (!pte)
+		return NULL;
+	addr &= page_level_mask(l);
+	head = kmmio_page_list(addr);
 	list_for_each_entry_rcu(f, head, list) {
-		if (f->page == page)
+		if (f->addr == addr)
 			return f;
 	}
 	return NULL;
@@ -137,10 +148,10 @@ static void clear_pte_presence(pte_t *pte, bool clear, pteval_t *old)
 static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 {
 	unsigned int level;
-	pte_t *pte = lookup_address(f->page, &level);
+	pte_t *pte = lookup_address(f->addr, &level);
 
 	if (!pte) {
-		pr_err("no pte for page 0x%08lx\n", f->page);
+		pr_err("no pte for addr 0x%08lx\n", f->addr);
 		return -1;
 	}
 
@@ -156,7 +167,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 		return -1;
 	}
 
-	__flush_tlb_one(f->page);
+	__flush_tlb_one(f->addr);
 	return 0;
 }
 
@@ -176,12 +187,12 @@ static int arm_kmmio_fault_page(struct kmmio_fault_page *f)
 	int ret;
 	WARN_ONCE(f->armed, KERN_ERR pr_fmt("kmmio page already armed.\n"));
 	if (f->armed) {
-		pr_warning("double-arm: page 0x%08lx, ref %d, old %d\n",
-			   f->page, f->count, !!f->old_presence);
+		pr_warning("double-arm: addr 0x%08lx, ref %d, old %d\n",
+			   f->addr, f->count, !!f->old_presence);
 	}
 	ret = clear_page_presence(f, true);
-	WARN_ONCE(ret < 0, KERN_ERR pr_fmt("arming 0x%08lx failed.\n"),
-		  f->page);
+	WARN_ONCE(ret < 0, KERN_ERR pr_fmt("arming at 0x%08lx failed.\n"),
+		  f->addr);
 	f->armed = true;
 	return ret;
 }
@@ -191,7 +202,7 @@ static void disarm_kmmio_fault_page(struct kmmio_fault_page *f)
 {
 	int ret = clear_page_presence(f, false);
 	WARN_ONCE(ret < 0,
-			KERN_ERR "kmmio disarming 0x%08lx failed.\n", f->page);
+			KERN_ERR "kmmio disarming at 0x%08lx failed.\n", f->addr);
 	f->armed = false;
 }
 
@@ -215,6 +226,12 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 	struct kmmio_context *ctx;
 	struct kmmio_fault_page *faultpage;
 	int ret = 0; /* default to fault not handled */
+	unsigned long page_base = addr;
+	unsigned int l;
+	pte_t *pte = lookup_address(addr, &l);
+	if (!pte)
+		return -EINVAL;
+	page_base &= page_level_mask(l);
 
 	/*
 	 * Preemption is now disabled to prevent process switch during
@@ -227,7 +244,7 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 	preempt_disable();
 	rcu_read_lock();
 
-	faultpage = get_kmmio_fault_page(addr);
+	faultpage = get_kmmio_fault_page(page_base);
 	if (!faultpage) {
 		/*
 		 * Either this page fault is not caused by kmmio, or
@@ -239,7 +256,7 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 
 	ctx = &get_cpu_var(kmmio_ctx);
 	if (ctx->active) {
-		if (addr == ctx->addr) {
+		if (page_base == ctx->addr) {
 			/*
 			 * A second fault on the same page means some other
 			 * condition needs handling by do_page_fault(), the
@@ -267,9 +284,9 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr)
 	ctx->active++;
 
 	ctx->fpage = faultpage;
-	ctx->probe = get_kmmio_probe(addr);
+	ctx->probe = get_kmmio_probe(page_base);
 	ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
-	ctx->addr = addr;
+	ctx->addr = page_base;
 
 	if (ctx->probe && ctx->probe->pre_handler)
 		ctx->probe->pre_handler(ctx->probe, regs, addr);
@@ -354,12 +371,11 @@ out:
 }
 
 /* You must be holding kmmio_lock. */
-static int add_kmmio_fault_page(unsigned long page)
+static int add_kmmio_fault_page(unsigned long addr)
 {
 	struct kmmio_fault_page *f;
 
-	page &= PAGE_MASK;
-	f = get_kmmio_fault_page(page);
+	f = get_kmmio_fault_page(addr);
 	if (f) {
 		if (!f->count)
 			arm_kmmio_fault_page(f);
@@ -372,26 +388,25 @@ static int add_kmmio_fault_page(unsigned long page)
 		return -1;
 
 	f->count = 1;
-	f->page = page;
+	f->addr = addr;
 
 	if (arm_kmmio_fault_page(f)) {
 		kfree(f);
 		return -1;
 	}
 
-	list_add_rcu(&f->list, kmmio_page_list(f->page));
+	list_add_rcu(&f->list, kmmio_page_list(f->addr));
 
 	return 0;
 }
 
 /* You must be holding kmmio_lock. */
-static void release_kmmio_fault_page(unsigned long page,
+static void release_kmmio_fault_page(unsigned long addr,
 				struct kmmio_fault_page **release_list)
 {
 	struct kmmio_fault_page *f;
 
-	page &= PAGE_MASK;
-	f = get_kmmio_fault_page(page);
+	f = get_kmmio_fault_page(addr);
 	if (!f)
 		return;
 
@@ -420,18 +435,27 @@ int register_kmmio_probe(struct kmmio_probe *p)
 	int ret = 0;
 	unsigned long size = 0;
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
+	unsigned int l;
+	pte_t *pte;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
 	if (get_kmmio_probe(p->addr)) {
 		ret = -EEXIST;
 		goto out;
 	}
+
+	pte = lookup_address(p->addr, &l);
+	if (!pte) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	kmmio_count++;
 	list_add_rcu(&p->list, &kmmio_probes);
 	while (size < size_lim) {
 		if (add_kmmio_fault_page(p->addr + size))
 			pr_err("Unable to set page fault.\n");
-		size += PAGE_SIZE;
+		size += page_level_size(l);
 	}
 out:
 	spin_unlock_irqrestore(&kmmio_lock, flags);
@@ -506,11 +530,17 @@ void unregister_kmmio_probe(struct kmmio_probe *p)
 	const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK);
 	struct kmmio_fault_page *release_list = NULL;
 	struct kmmio_delayed_release *drelease;
+	unsigned int l;
+	pte_t *pte;
+
+	pte = lookup_address(p->addr, &l);
+	if (!pte)
+		return;
 
 	spin_lock_irqsave(&kmmio_lock, flags);
 	while (size < size_lim) {
 		release_kmmio_fault_page(p->addr + size, &release_list);
-		size += PAGE_SIZE;
+		size += page_level_size(l);
 	}
 	list_del_rcu(&p->list);
 	kmmio_count--;
diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c
index 844b06d67df4..d2dc0438d654 100644
--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -69,14 +69,14 @@ unsigned long arch_mmap_rnd(void)
 {
 	unsigned long rnd;
 
-	/*
-	 *  8 bits of randomness in 32bit mmaps, 20 address space bits
-	 * 28 bits of randomness in 64bit mmaps, 40 address space bits
-	 */
 	if (mmap_is_ia32())
-		rnd = (unsigned long)get_random_int() % (1<<8);
+#ifdef CONFIG_COMPAT
+		rnd = get_random_long() & ((1UL << mmap_rnd_compat_bits) - 1);
+#else
+		rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
+#endif
 	else
-		rnd = (unsigned long)get_random_int() % (1<<28);
+		rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1);
 
 	return rnd << PAGE_SHIFT;
 }
@@ -94,18 +94,6 @@ static unsigned long mmap_base(unsigned long rnd)
 }
 
 /*
- * Bottom-up (legacy) layout on X86_32 did not support randomization, X86_64
- * does, but not when emulating X86_32
- */
-static unsigned long mmap_legacy_base(unsigned long rnd)
-{
-	if (mmap_is_ia32())
-		return TASK_UNMAPPED_BASE;
-	else
-		return TASK_UNMAPPED_BASE + rnd;
-}
-
-/*
  * This function, called very early during the creation of a new
  * process VM image, sets up which VM layout function to use:
  */
@@ -116,7 +104,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm)
 	if (current->flags & PF_RANDOMIZE)
 		random_factor = arch_mmap_rnd();
 
-	mm->mmap_legacy_base = mmap_legacy_base(random_factor);
+	mm->mmap_legacy_base = TASK_UNMAPPED_BASE + random_factor;
 
 	if (mmap_is_legacy()) {
 		mm->mmap_base = mm->mmap_legacy_base;
diff --git a/arch/x86/mm/mpx.c b/arch/x86/mm/mpx.c
index b0ae85f90f10..80476878eb4c 100644
--- a/arch/x86/mm/mpx.c
+++ b/arch/x86/mm/mpx.c
@@ -101,19 +101,19 @@ static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
 	switch (type) {
 	case REG_TYPE_RM:
 		regno = X86_MODRM_RM(insn->modrm.value);
-		if (X86_REX_B(insn->rex_prefix.value) == 1)
+		if (X86_REX_B(insn->rex_prefix.value))
 			regno += 8;
 		break;
 
 	case REG_TYPE_INDEX:
 		regno = X86_SIB_INDEX(insn->sib.value);
-		if (X86_REX_X(insn->rex_prefix.value) == 1)
+		if (X86_REX_X(insn->rex_prefix.value))
 			regno += 8;
 		break;
 
 	case REG_TYPE_BASE:
 		regno = X86_SIB_BASE(insn->sib.value);
-		if (X86_REX_B(insn->rex_prefix.value) == 1)
+		if (X86_REX_B(insn->rex_prefix.value))
 			regno += 8;
 		break;
 
@@ -123,7 +123,7 @@ static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
 		break;
 	}
 
-	if (regno > nr_registers) {
+	if (regno >= nr_registers) {
 		WARN_ONCE(1, "decoded an instruction with an invalid register");
 		return -EINVAL;
 	}
@@ -546,8 +546,8 @@ static int mpx_resolve_fault(long __user *addr, int write)
 	int nr_pages = 1;
 	int force = 0;
 
-	gup_ret = get_user_pages(current, current->mm, (unsigned long)addr,
-				 nr_pages, write, force, NULL, NULL);
+	gup_ret = get_user_pages((unsigned long)addr, nr_pages, write,
+			force, NULL, NULL);
 	/*
 	 * get_user_pages() returns number of pages gotten.
 	 * 0 means we failed to fault in and get anything,
@@ -586,6 +586,29 @@ static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
 }
 
 /*
+ * We only want to do a 4-byte get_user() on 32-bit.  Otherwise,
+ * we might run off the end of the bounds table if we are on
+ * a 64-bit kernel and try to get 8 bytes.
+ */
+int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
+		long __user *bd_entry_ptr)
+{
+	u32 bd_entry_32;
+	int ret;
+
+	if (is_64bit_mm(mm))
+		return get_user(*bd_entry_ret, bd_entry_ptr);
+
+	/*
+	 * Note that get_user() uses the type of the *pointer* to
+	 * establish the size of the get, not the destination.
+	 */
+	ret = get_user(bd_entry_32, (u32 __user *)bd_entry_ptr);
+	*bd_entry_ret = bd_entry_32;
+	return ret;
+}
+
+/*
  * Get the base of bounds tables pointed by specific bounds
  * directory entry.
  */
@@ -605,7 +628,7 @@ static int get_bt_addr(struct mm_struct *mm,
 		int need_write = 0;
 
 		pagefault_disable();
-		ret = get_user(bd_entry, bd_entry_ptr);
+		ret = get_user_bd_entry(mm, &bd_entry, bd_entry_ptr);
 		pagefault_enable();
 		if (!ret)
 			break;
@@ -700,11 +723,23 @@ static unsigned long mpx_get_bt_entry_offset_bytes(struct mm_struct *mm,
  */
 static inline unsigned long bd_entry_virt_space(struct mm_struct *mm)
 {
-	unsigned long long virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
-	if (is_64bit_mm(mm))
-		return virt_space / MPX_BD_NR_ENTRIES_64;
-	else
-		return virt_space / MPX_BD_NR_ENTRIES_32;
+	unsigned long long virt_space;
+	unsigned long long GB = (1ULL << 30);
+
+	/*
+	 * This covers 32-bit emulation as well as 32-bit kernels
+	 * running on 64-bit hardware.
+	 */
+	if (!is_64bit_mm(mm))
+		return (4ULL * GB) / MPX_BD_NR_ENTRIES_32;
+
+	/*
+	 * 'x86_virt_bits' returns what the hardware is capable
+	 * of, and returns the full >32-bit address space when
+	 * running 32-bit kernels on 64-bit hardware.
+	 */
+	virt_space = (1ULL << boot_cpu_data.x86_virt_bits);
+	return virt_space / MPX_BD_NR_ENTRIES_64;
 }
 
 /*
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index c3b3f653ed0c..f70c1ff46125 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -465,46 +465,67 @@ static bool __init numa_meminfo_cover_memory(const struct numa_meminfo *mi)
 	return true;
 }
 
+/*
+ * Mark all currently memblock-reserved physical memory (which covers the
+ * kernel's own memory ranges) as hot-unswappable.
+ */
 static void __init numa_clear_kernel_node_hotplug(void)
 {
-	int i, nid;
-	nodemask_t numa_kernel_nodes = NODE_MASK_NONE;
-	unsigned long start, end;
-	struct memblock_region *r;
+	nodemask_t reserved_nodemask = NODE_MASK_NONE;
+	struct memblock_region *mb_region;
+	int i;
 
 	/*
+	 * We have to do some preprocessing of memblock regions, to
+	 * make them suitable for reservation.
+	 *
 	 * At this time, all memory regions reserved by memblock are
-	 * used by the kernel. Set the nid in memblock.reserved will
-	 * mark out all the nodes the kernel resides in.
+	 * used by the kernel, but those regions are not split up
+	 * along node boundaries yet, and don't necessarily have their
+	 * node ID set yet either.
+	 *
+	 * So iterate over all memory known to the x86 architecture,
+	 * and use those ranges to set the nid in memblock.reserved.
+	 * This will split up the memblock regions along node
+	 * boundaries and will set the node IDs as well.
 	 */
 	for (i = 0; i < numa_meminfo.nr_blks; i++) {
-		struct numa_memblk *mb = &numa_meminfo.blk[i];
+		struct numa_memblk *mb = numa_meminfo.blk + i;
+		int ret;
 
-		memblock_set_node(mb->start, mb->end - mb->start,
-				  &memblock.reserved, mb->nid);
+		ret = memblock_set_node(mb->start, mb->end - mb->start, &memblock.reserved, mb->nid);
+		WARN_ON_ONCE(ret);
 	}
 
 	/*
-	 * Mark all kernel nodes.
+	 * Now go over all reserved memblock regions, to construct a
+	 * node mask of all kernel reserved memory areas.
 	 *
-	 * When booting with mem=nn[kMG] or in a kdump kernel, numa_meminfo
-	 * may not include all the memblock.reserved memory ranges because
-	 * trim_snb_memory() reserves specific pages for Sandy Bridge graphics.
+	 * [ Note, when booting with mem=nn[kMG] or in a kdump kernel,
+	 *   numa_meminfo might not include all memblock.reserved
+	 *   memory ranges, because quirks such as trim_snb_memory()
+	 *   reserve specific pages for Sandy Bridge graphics. ]
 	 */
-	for_each_memblock(reserved, r)
-		if (r->nid != MAX_NUMNODES)
-			node_set(r->nid, numa_kernel_nodes);
+	for_each_memblock(reserved, mb_region) {
+		if (mb_region->nid != MAX_NUMNODES)
+			node_set(mb_region->nid, reserved_nodemask);
+	}
 
-	/* Clear MEMBLOCK_HOTPLUG flag for memory in kernel nodes. */
+	/*
+	 * Finally, clear the MEMBLOCK_HOTPLUG flag for all memory
+	 * belonging to the reserved node mask.
+	 *
+	 * Note that this will include memory regions that reside
+	 * on nodes that contain kernel memory - entire nodes
+	 * become hot-unpluggable:
+	 */
 	for (i = 0; i < numa_meminfo.nr_blks; i++) {
-		nid = numa_meminfo.blk[i].nid;
-		if (!node_isset(nid, numa_kernel_nodes))
-			continue;
+		struct numa_memblk *mb = numa_meminfo.blk + i;
 
-		start = numa_meminfo.blk[i].start;
-		end = numa_meminfo.blk[i].end;
+		if (!node_isset(mb->nid, reserved_nodemask))
+			continue;
 
-		memblock_clear_hotplug(start, end - start);
+		memblock_clear_hotplug(mb->start, mb->end - mb->start);
 	}
 }
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index a3137a4feed1..01be9ec3bf79 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -33,7 +33,7 @@ struct cpa_data {
 	pgd_t		*pgd;
 	pgprot_t	mask_set;
 	pgprot_t	mask_clr;
-	int		numpages;
+	unsigned long	numpages;
 	int		flags;
 	unsigned long	pfn;
 	unsigned	force_split : 1;
@@ -66,6 +66,9 @@ void update_page_count(int level, unsigned long pages)
 
 static void split_page_count(int level)
 {
+	if (direct_pages_count[level] == 0)
+		return;
+
 	direct_pages_count[level]--;
 	direct_pages_count[level - 1] += PTRS_PER_PTE;
 }
@@ -103,12 +106,6 @@ static inline unsigned long highmap_end_pfn(void)
 
 #endif
 
-#ifdef CONFIG_DEBUG_PAGEALLOC
-# define debug_pagealloc 1
-#else
-# define debug_pagealloc 0
-#endif
-
 static inline int
 within(unsigned long addr, unsigned long start, unsigned long end)
 {
@@ -129,14 +126,16 @@ within(unsigned long addr, unsigned long start, unsigned long end)
  */
 void clflush_cache_range(void *vaddr, unsigned int size)
 {
-	unsigned long clflush_mask = boot_cpu_data.x86_clflush_size - 1;
+	const unsigned long clflush_size = boot_cpu_data.x86_clflush_size;
+	void *p = (void *)((unsigned long)vaddr & ~(clflush_size - 1));
 	void *vend = vaddr + size;
-	void *p;
+
+	if (p >= vend)
+		return;
 
 	mb();
 
-	for (p = (void *)((unsigned long)vaddr & ~clflush_mask);
-	     p < vend; p += boot_cpu_data.x86_clflush_size)
+	for (; p < vend; p += clflush_size)
 		clflushopt(p);
 
 	mb();
@@ -278,7 +277,7 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 		   __pa_symbol(__end_rodata) >> PAGE_SHIFT))
 		pgprot_val(forbidden) |= _PAGE_RW;
 
-#if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
+#if defined(CONFIG_X86_64)
 	/*
 	 * Once the kernel maps the text as RO (kernel_set_to_readonly is set),
 	 * kernel text mappings for the large page aligned text, rodata sections
@@ -414,24 +413,30 @@ pmd_t *lookup_pmd_address(unsigned long address)
 phys_addr_t slow_virt_to_phys(void *__virt_addr)
 {
 	unsigned long virt_addr = (unsigned long)__virt_addr;
-	unsigned long phys_addr, offset;
+	phys_addr_t phys_addr;
+	unsigned long offset;
 	enum pg_level level;
 	pte_t *pte;
 
 	pte = lookup_address(virt_addr, &level);
 	BUG_ON(!pte);
 
+	/*
+	 * pXX_pfn() returns unsigned long, which must be cast to phys_addr_t
+	 * before being left-shifted PAGE_SHIFT bits -- this trick is to
+	 * make 32-PAE kernel work correctly.
+	 */
 	switch (level) {
 	case PG_LEVEL_1G:
-		phys_addr = pud_pfn(*(pud_t *)pte) << PAGE_SHIFT;
+		phys_addr = (phys_addr_t)pud_pfn(*(pud_t *)pte) << PAGE_SHIFT;
 		offset = virt_addr & ~PUD_PAGE_MASK;
 		break;
 	case PG_LEVEL_2M:
-		phys_addr = pmd_pfn(*(pmd_t *)pte) << PAGE_SHIFT;
+		phys_addr = (phys_addr_t)pmd_pfn(*(pmd_t *)pte) << PAGE_SHIFT;
 		offset = virt_addr & ~PMD_PAGE_MASK;
 		break;
 	default:
-		phys_addr = pte_pfn(*pte) << PAGE_SHIFT;
+		phys_addr = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
 		offset = virt_addr & ~PAGE_MASK;
 	}
 
@@ -703,10 +708,10 @@ static int split_large_page(struct cpa_data *cpa, pte_t *kpte,
 {
 	struct page *base;
 
-	if (!debug_pagealloc)
+	if (!debug_pagealloc_enabled())
 		spin_unlock(&cpa_lock);
 	base = alloc_pages(GFP_KERNEL | __GFP_NOTRACK, 0);
-	if (!debug_pagealloc)
+	if (!debug_pagealloc_enabled())
 		spin_lock(&cpa_lock);
 	if (!base)
 		return -ENOMEM;
@@ -904,16 +909,25 @@ static void populate_pte(struct cpa_data *cpa,
 
 	pte = pte_offset_kernel(pmd, start);
 
-	while (num_pages-- && start < end) {
+	/*
+	 * Set the GLOBAL flags only if the PRESENT flag is
+	 * set otherwise pte_present will return true even on
+	 * a non present pte. The canon_pgprot will clear
+	 * _PAGE_GLOBAL for the ancient hardware that doesn't
+	 * support it.
+	 */
+	if (pgprot_val(pgprot) & _PAGE_PRESENT)
+		pgprot_val(pgprot) |= _PAGE_GLOBAL;
+	else
+		pgprot_val(pgprot) &= ~_PAGE_GLOBAL;
 
-		/* deal with the NX bit */
-		if (!(pgprot_val(pgprot) & _PAGE_NX))
-			cpa->pfn &= ~_PAGE_NX;
+	pgprot = canon_pgprot(pgprot);
 
-		set_pte(pte, pfn_pte(cpa->pfn >> PAGE_SHIFT, pgprot));
+	while (num_pages-- && start < end) {
+		set_pte(pte, pfn_pte(cpa->pfn, pgprot));
 
 		start	 += PAGE_SIZE;
-		cpa->pfn += PAGE_SIZE;
+		cpa->pfn++;
 		pte++;
 	}
 }
@@ -969,11 +983,11 @@ static int populate_pmd(struct cpa_data *cpa,
 
 		pmd = pmd_offset(pud, start);
 
-		set_pmd(pmd, __pmd(cpa->pfn | _PAGE_PSE |
+		set_pmd(pmd, __pmd(cpa->pfn << PAGE_SHIFT | _PAGE_PSE |
 				   massage_pgprot(pmd_pgprot)));
 
 		start	  += PMD_SIZE;
-		cpa->pfn  += PMD_SIZE;
+		cpa->pfn  += PMD_SIZE >> PAGE_SHIFT;
 		cur_pages += PMD_SIZE >> PAGE_SHIFT;
 	}
 
@@ -1041,12 +1055,12 @@ static int populate_pud(struct cpa_data *cpa, unsigned long start, pgd_t *pgd,
 	/*
 	 * Map everything starting from the Gb boundary, possibly with 1G pages
 	 */
-	while (end - start >= PUD_SIZE) {
-		set_pud(pud, __pud(cpa->pfn | _PAGE_PSE |
+	while (cpu_has_gbpages && end - start >= PUD_SIZE) {
+		set_pud(pud, __pud(cpa->pfn << PAGE_SHIFT | _PAGE_PSE |
 				   massage_pgprot(pud_pgprot)));
 
 		start	  += PUD_SIZE;
-		cpa->pfn  += PUD_SIZE;
+		cpa->pfn  += PUD_SIZE >> PAGE_SHIFT;
 		cur_pages += PUD_SIZE >> PAGE_SHIFT;
 		pud++;
 	}
@@ -1117,8 +1131,10 @@ static int __cpa_process_fault(struct cpa_data *cpa, unsigned long vaddr,
 	/*
 	 * Ignore all non primary paths.
 	 */
-	if (!primary)
+	if (!primary) {
+		cpa->numpages = 1;
 		return 0;
+	}
 
 	/*
 	 * Ignore the NULL PTE for kernel identity mapping, as it is expected
@@ -1326,10 +1342,10 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
 		if (cpa->flags & (CPA_ARRAY | CPA_PAGES_ARRAY))
 			cpa->numpages = 1;
 
-		if (!debug_pagealloc)
+		if (!debug_pagealloc_enabled())
 			spin_lock(&cpa_lock);
 		ret = __change_page_attr(cpa, checkalias);
-		if (!debug_pagealloc)
+		if (!debug_pagealloc_enabled())
 			spin_unlock(&cpa_lock);
 		if (ret)
 			return ret;
@@ -1345,7 +1361,7 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
 		 * CPA operation. Either a large page has been
 		 * preserved or a single page update happened.
 		 */
-		BUG_ON(cpa->numpages > numpages);
+		BUG_ON(cpa->numpages > numpages || !cpa->numpages);
 		numpages -= cpa->numpages;
 		if (cpa->flags & (CPA_PAGES_ARRAY | CPA_ARRAY))
 			cpa->curpage++;
@@ -1957,6 +1973,9 @@ int kernel_map_pages_in_pgd(pgd_t *pgd, u64 pfn, unsigned long address,
 	if (!(page_flags & _PAGE_NX))
 		cpa.mask_clr = __pgprot(_PAGE_NX);
 
+	if (!(page_flags & _PAGE_RW))
+		cpa.mask_clr = __pgprot(_PAGE_RW);
+
 	cpa.mask_set = __pgprot(_PAGE_PRESENT | page_flags);
 
 	retval = __change_page_attr_set_clr(&cpa, 0);
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 188e3e07eeeb..faec01e7a17d 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -12,6 +12,7 @@
 #include <linux/debugfs.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/pfn_t.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
@@ -148,7 +149,7 @@ enum {
 	PAT_WT = 4,		/* Write Through */
 	PAT_WP = 5,		/* Write Protected */
 	PAT_WB = 6,		/* Write Back (default) */
-	PAT_UC_MINUS = 7,	/* UC, but can be overriden by MTRR */
+	PAT_UC_MINUS = 7,	/* UC, but can be overridden by MTRR */
 };
 
 #define CM(c) (_PAGE_CACHE_MODE_ ## c)
@@ -586,7 +587,7 @@ int free_memtype(u64 start, u64 end)
 	entry = rbt_memtype_erase(start, end);
 	spin_unlock(&memtype_lock);
 
-	if (!entry) {
+	if (IS_ERR(entry)) {
 		pr_info("x86/PAT: %s:%d freeing invalid memtype [mem %#010Lx-%#010Lx]\n",
 			current->comm, current->pid, start, end - 1);
 		return -EINVAL;
@@ -942,14 +943,14 @@ int track_pfn_remap(struct vm_area_struct *vma, pgprot_t *prot,
 			return -EINVAL;
 	}
 
-	*prot = __pgprot((pgprot_val(vma->vm_page_prot) & (~_PAGE_CACHE_MASK)) |
+	*prot = __pgprot((pgprot_val(*prot) & (~_PAGE_CACHE_MASK)) |
 			 cachemode2protval(pcm));
 
 	return 0;
 }
 
 int track_pfn_insert(struct vm_area_struct *vma, pgprot_t *prot,
-		     unsigned long pfn)
+		     pfn_t pfn)
 {
 	enum page_cache_mode pcm;
 
@@ -957,8 +958,8 @@ int track_pfn_insert(struct vm_area_struct *vma, pgprot_t *prot,
 		return 0;
 
 	/* Set prot based on lookup */
-	pcm = lookup_memtype((resource_size_t)pfn << PAGE_SHIFT);
-	*prot = __pgprot((pgprot_val(vma->vm_page_prot) & (~_PAGE_CACHE_MASK)) |
+	pcm = lookup_memtype(pfn_t_to_phys(pfn));
+	*prot = __pgprot((pgprot_val(*prot) & (~_PAGE_CACHE_MASK)) |
 			 cachemode2protval(pcm));
 
 	return 0;
@@ -992,6 +993,16 @@ void untrack_pfn(struct vm_area_struct *vma, unsigned long pfn,
 	vma->vm_flags &= ~VM_PAT;
 }
 
+/*
+ * untrack_pfn_moved is called, while mremapping a pfnmap for a new region,
+ * with the old vma after its pfnmap page table has been removed.  The new
+ * vma has a new pfnmap to the same pfn & cache type with VM_PAT set.
+ */
+void untrack_pfn_moved(struct vm_area_struct *vma)
+{
+	vma->vm_flags &= ~VM_PAT;
+}
+
 pgprot_t pgprot_writecombine(pgprot_t prot)
 {
 	return __pgprot(pgprot_val(prot) |
diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c
index 63931080366a..2f7702253ccf 100644
--- a/arch/x86/mm/pat_rbtree.c
+++ b/arch/x86/mm/pat_rbtree.c
@@ -98,8 +98,13 @@ static struct memtype *memtype_rb_lowest_match(struct rb_root *root,
 	return last_lower; /* Returns NULL if there is no overlap */
 }
 
-static struct memtype *memtype_rb_exact_match(struct rb_root *root,
-				u64 start, u64 end)
+enum {
+	MEMTYPE_EXACT_MATCH	= 0,
+	MEMTYPE_END_MATCH	= 1
+};
+
+static struct memtype *memtype_rb_match(struct rb_root *root,
+				u64 start, u64 end, int match_type)
 {
 	struct memtype *match;
 
@@ -107,7 +112,12 @@ static struct memtype *memtype_rb_exact_match(struct rb_root *root,
 	while (match != NULL && match->start < end) {
 		struct rb_node *node;
 
-		if (match->start == start && match->end == end)
+		if ((match_type == MEMTYPE_EXACT_MATCH) &&
+		    (match->start == start) && (match->end == end))
+			return match;
+
+		if ((match_type == MEMTYPE_END_MATCH) &&
+		    (match->start < start) && (match->end == end))
 			return match;
 
 		node = rb_next(&match->rb);
@@ -117,7 +127,7 @@ static struct memtype *memtype_rb_exact_match(struct rb_root *root,
 			match = NULL;
 	}
 
-	return NULL; /* Returns NULL if there is no exact match */
+	return NULL; /* Returns NULL if there is no match */
 }
 
 static int memtype_rb_check_conflict(struct rb_root *root,
@@ -210,12 +220,36 @@ struct memtype *rbt_memtype_erase(u64 start, u64 end)
 {
 	struct memtype *data;
 
-	data = memtype_rb_exact_match(&memtype_rbroot, start, end);
-	if (!data)
-		goto out;
+	/*
+	 * Since the memtype_rbroot tree allows overlapping ranges,
+	 * rbt_memtype_erase() checks with EXACT_MATCH first, i.e. free
+	 * a whole node for the munmap case.  If no such entry is found,
+	 * it then checks with END_MATCH, i.e. shrink the size of a node
+	 * from the end for the mremap case.
+	 */
+	data = memtype_rb_match(&memtype_rbroot, start, end,
+				MEMTYPE_EXACT_MATCH);
+	if (!data) {
+		data = memtype_rb_match(&memtype_rbroot, start, end,
+					MEMTYPE_END_MATCH);
+		if (!data)
+			return ERR_PTR(-EINVAL);
+	}
+
+	if (data->start == start) {
+		/* munmap: erase this node */
+		rb_erase_augmented(&data->rb, &memtype_rbroot,
+					&memtype_rb_augment_cb);
+	} else {
+		/* mremap: update the end value of this node */
+		rb_erase_augmented(&data->rb, &memtype_rbroot,
+					&memtype_rb_augment_cb);
+		data->end = start;
+		data->subtree_max_end = data->end;
+		memtype_rb_insert(&memtype_rbroot, data);
+		return NULL;
+	}
 
-	rb_erase_augmented(&data->rb, &memtype_rbroot, &memtype_rb_augment_cb);
-out:
 	return data;
 }
 
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index fb0a9dd1d6e4..4eb287e25043 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -414,7 +414,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma,
 
 	if (changed && dirty) {
 		*ptep = entry;
-		pte_update_defer(vma->vm_mm, address, ptep);
+		pte_update(vma->vm_mm, address, ptep);
 	}
 
 	return changed;
@@ -431,7 +431,6 @@ int pmdp_set_access_flags(struct vm_area_struct *vma,
 
 	if (changed && dirty) {
 		*pmdp = entry;
-		pmd_update_defer(vma->vm_mm, address, pmdp);
 		/*
 		 * We had a write-protection fault here and changed the pmd
 		 * to to more permissive. No need to flush the TLB for that,
@@ -469,9 +468,6 @@ int pmdp_test_and_clear_young(struct vm_area_struct *vma,
 		ret = test_and_clear_bit(_PAGE_BIT_ACCESSED,
 					 (unsigned long *)pmdp);
 
-	if (ret)
-		pmd_update(vma->vm_mm, addr, pmdp);
-
 	return ret;
 }
 #endif
@@ -509,20 +505,6 @@ int pmdp_clear_flush_young(struct vm_area_struct *vma,
 
 	return young;
 }
-
-void pmdp_splitting_flush(struct vm_area_struct *vma,
-			  unsigned long address, pmd_t *pmdp)
-{
-	int set;
-	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
-	set = !test_and_set_bit(_PAGE_BIT_SPLITTING,
-				(unsigned long *)pmdp);
-	if (set) {
-		pmd_update(vma->vm_mm, address, pmdp);
-		/* need tlb flush only to serialize against gup-fast */
-		flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
-	}
-}
 #endif
 
 /**
diff --git a/arch/x86/mm/pkeys.c b/arch/x86/mm/pkeys.c
new file mode 100644
index 000000000000..e8c474451928
--- /dev/null
+++ b/arch/x86/mm/pkeys.c
@@ -0,0 +1,101 @@
+/*
+ * Intel Memory Protection Keys management
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+#include <linux/mm_types.h>             /* mm_struct, vma, etc...       */
+#include <linux/pkeys.h>                /* PKEY_*                       */
+#include <uapi/asm-generic/mman-common.h>
+
+#include <asm/cpufeature.h>             /* boot_cpu_has, ...            */
+#include <asm/mmu_context.h>            /* vma_pkey()                   */
+#include <asm/fpu/internal.h>           /* fpregs_active()              */
+
+int __execute_only_pkey(struct mm_struct *mm)
+{
+	int ret;
+
+	/*
+	 * We do not want to go through the relatively costly
+	 * dance to set PKRU if we do not need to.  Check it
+	 * first and assume that if the execute-only pkey is
+	 * write-disabled that we do not have to set it
+	 * ourselves.  We need preempt off so that nobody
+	 * can make fpregs inactive.
+	 */
+	preempt_disable();
+	if (fpregs_active() &&
+	    !__pkru_allows_read(read_pkru(), PKEY_DEDICATED_EXECUTE_ONLY)) {
+		preempt_enable();
+		return PKEY_DEDICATED_EXECUTE_ONLY;
+	}
+	preempt_enable();
+	ret = arch_set_user_pkey_access(current, PKEY_DEDICATED_EXECUTE_ONLY,
+			PKEY_DISABLE_ACCESS);
+	/*
+	 * If the PKRU-set operation failed somehow, just return
+	 * 0 and effectively disable execute-only support.
+	 */
+	if (ret)
+		return 0;
+
+	return PKEY_DEDICATED_EXECUTE_ONLY;
+}
+
+static inline bool vma_is_pkey_exec_only(struct vm_area_struct *vma)
+{
+	/* Do this check first since the vm_flags should be hot */
+	if ((vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC)) != VM_EXEC)
+		return false;
+	if (vma_pkey(vma) != PKEY_DEDICATED_EXECUTE_ONLY)
+		return false;
+
+	return true;
+}
+
+/*
+ * This is only called for *plain* mprotect calls.
+ */
+int __arch_override_mprotect_pkey(struct vm_area_struct *vma, int prot, int pkey)
+{
+	/*
+	 * Is this an mprotect_pkey() call?  If so, never
+	 * override the value that came from the user.
+	 */
+	if (pkey != -1)
+		return pkey;
+	/*
+	 * Look for a protection-key-drive execute-only mapping
+	 * which is now being given permissions that are not
+	 * execute-only.  Move it back to the default pkey.
+	 */
+	if (vma_is_pkey_exec_only(vma) &&
+	    (prot & (PROT_READ|PROT_WRITE))) {
+		return 0;
+	}
+	/*
+	 * The mapping is execute-only.  Go try to get the
+	 * execute-only protection key.  If we fail to do that,
+	 * fall through as if we do not have execute-only
+	 * support.
+	 */
+	if (prot == PROT_EXEC) {
+		pkey = execute_only_pkey(vma->vm_mm);
+		if (pkey > 0)
+			return pkey;
+	}
+	/*
+	 * This is a vanilla, non-pkey mprotect (or we failed to
+	 * setup execute-only), inherit the pkey from the VMA we
+	 * are working on.
+	 */
+	return vma_pkey(vma);
+}
diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c
index 90555bf60aa4..8bea84724a7d 100644
--- a/arch/x86/mm/setup_nx.c
+++ b/arch/x86/mm/setup_nx.c
@@ -4,6 +4,7 @@
 
 #include <asm/pgtable.h>
 #include <asm/proto.h>
+#include <asm/cpufeature.h>
 
 static int disable_nx;
 
@@ -31,15 +32,14 @@ early_param("noexec", noexec_setup);
 
 void x86_configure_nx(void)
 {
-	if (cpu_has_nx && !disable_nx)
-		__supported_pte_mask |= _PAGE_NX;
-	else
+	/* If disable_nx is set, clear NX on all new mappings going forward. */
+	if (disable_nx)
 		__supported_pte_mask &= ~_PAGE_NX;
 }
 
 void __init x86_report_nx(void)
 {
-	if (!cpu_has_nx) {
+	if (!boot_cpu_has(X86_FEATURE_NX)) {
 		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
 		       "missing in CPU!\n");
 	} else {
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index c2aea63bee20..b5f821881465 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -203,6 +203,8 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 		pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n",
 			(unsigned long long)start, (unsigned long long)end - 1);
 
+	max_possible_pfn = max(max_possible_pfn, PFN_UP(end - 1));
+
 	return 0;
 out_err_bad_srat:
 	bad_srat();
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 8ddb5d0d66fb..fe9b9f776361 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -104,10 +104,8 @@ static void flush_tlb_func(void *info)
 
 	inc_irq_stat(irq_tlb_count);
 
-	if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
+	if (f->flush_mm && f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
 		return;
-	if (!f->flush_end)
-		f->flush_end = f->flush_start + PAGE_SIZE;
 
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
 	if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
@@ -135,12 +133,20 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 				 unsigned long end)
 {
 	struct flush_tlb_info info;
+
+	if (end == 0)
+		end = start + PAGE_SIZE;
 	info.flush_mm = mm;
 	info.flush_start = start;
 	info.flush_end = end;
 
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
-	trace_tlb_flush(TLB_REMOTE_SEND_IPI, end - start);
+	if (end == TLB_FLUSH_ALL)
+		trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL);
+	else
+		trace_tlb_flush(TLB_REMOTE_SEND_IPI,
+				(end - start) >> PAGE_SHIFT);
+
 	if (is_uv_system()) {
 		unsigned int cpu;
 
@@ -161,7 +167,10 @@ void flush_tlb_current_task(void)
 	preempt_disable();
 
 	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
+
+	/* This is an implicit full barrier that synchronizes with switch_mm. */
 	local_flush_tlb();
+
 	trace_tlb_flush(TLB_LOCAL_SHOOTDOWN, TLB_FLUSH_ALL);
 	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
 		flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
@@ -188,17 +197,29 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
 	unsigned long base_pages_to_flush = TLB_FLUSH_ALL;
 
 	preempt_disable();
-	if (current->active_mm != mm)
+	if (current->active_mm != mm) {
+		/* Synchronize with switch_mm. */
+		smp_mb();
+
 		goto out;
+	}
 
 	if (!current->mm) {
 		leave_mm(smp_processor_id());
+
+		/* Synchronize with switch_mm. */
+		smp_mb();
+
 		goto out;
 	}
 
 	if ((end != TLB_FLUSH_ALL) && !(vmflag & VM_HUGETLB))
 		base_pages_to_flush = (end - start) >> PAGE_SHIFT;
 
+	/*
+	 * Both branches below are implicit full barriers (MOV to CR or
+	 * INVLPG) that synchronize with switch_mm.
+	 */
 	if (base_pages_to_flush > tlb_single_page_flush_ceiling) {
 		base_pages_to_flush = TLB_FLUSH_ALL;
 		count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
@@ -228,10 +249,18 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long start)
 	preempt_disable();
 
 	if (current->active_mm == mm) {
-		if (current->mm)
+		if (current->mm) {
+			/*
+			 * Implicit full barrier (INVLPG) that synchronizes
+			 * with switch_mm.
+			 */
 			__flush_tlb_one(start);
-		else
+		} else {
 			leave_mm(smp_processor_id());
+
+			/* Synchronize with switch_mm. */
+			smp_mb();
+		}
 	}
 
 	if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
diff --git a/arch/x86/net/bpf_jit.S b/arch/x86/net/bpf_jit.S
index 4093216b3791..f2a7faf4706e 100644
--- a/arch/x86/net/bpf_jit.S
+++ b/arch/x86/net/bpf_jit.S
@@ -8,6 +8,7 @@
  * of the License.
  */
 #include <linux/linkage.h>
+#include <asm/frame.h>
 
 /*
  * Calling convention :
@@ -22,15 +23,16 @@
 	32 /* space for rbx,r13,r14,r15 */ + \
 	8 /* space for skb_copy_bits */)
 
-sk_load_word:
-	.globl	sk_load_word
+#define FUNC(name) \
+	.globl name; \
+	.type name, @function; \
+	name:
 
+FUNC(sk_load_word)
 	test	%esi,%esi
 	js	bpf_slow_path_word_neg
 
-sk_load_word_positive_offset:
-	.globl	sk_load_word_positive_offset
-
+FUNC(sk_load_word_positive_offset)
 	mov	%r9d,%eax		# hlen
 	sub	%esi,%eax		# hlen - offset
 	cmp	$3,%eax
@@ -39,15 +41,11 @@ sk_load_word_positive_offset:
 	bswap   %eax  			/* ntohl() */
 	ret
 
-sk_load_half:
-	.globl	sk_load_half
-
+FUNC(sk_load_half)
 	test	%esi,%esi
 	js	bpf_slow_path_half_neg
 
-sk_load_half_positive_offset:
-	.globl	sk_load_half_positive_offset
-
+FUNC(sk_load_half_positive_offset)
 	mov	%r9d,%eax
 	sub	%esi,%eax		#	hlen - offset
 	cmp	$1,%eax
@@ -56,15 +54,11 @@ sk_load_half_positive_offset:
 	rol	$8,%ax			# ntohs()
 	ret
 
-sk_load_byte:
-	.globl	sk_load_byte
-
+FUNC(sk_load_byte)
 	test	%esi,%esi
 	js	bpf_slow_path_byte_neg
 
-sk_load_byte_positive_offset:
-	.globl	sk_load_byte_positive_offset
-
+FUNC(sk_load_byte_positive_offset)
 	cmp	%esi,%r9d   /* if (offset >= hlen) goto bpf_slow_path_byte */
 	jle	bpf_slow_path_byte
 	movzbl	(SKBDATA,%rsi),%eax
@@ -72,16 +66,18 @@ sk_load_byte_positive_offset:
 
 /* rsi contains offset and can be scratched */
 #define bpf_slow_path_common(LEN)		\
+	lea	-MAX_BPF_STACK + 32(%rbp), %rdx;\
+	FRAME_BEGIN;				\
 	mov	%rbx, %rdi; /* arg1 == skb */	\
 	push	%r9;				\
 	push	SKBDATA;			\
 /* rsi already has offset */			\
 	mov	$LEN,%ecx;	/* len */	\
-	lea	- MAX_BPF_STACK + 32(%rbp),%rdx;			\
 	call	skb_copy_bits;			\
 	test    %eax,%eax;			\
 	pop	SKBDATA;			\
-	pop	%r9;
+	pop	%r9;				\
+	FRAME_END
 
 
 bpf_slow_path_word:
@@ -106,6 +102,7 @@ bpf_slow_path_byte:
 	ret
 
 #define sk_negative_common(SIZE)				\
+	FRAME_BEGIN;						\
 	mov	%rbx, %rdi; /* arg1 == skb */			\
 	push	%r9;						\
 	push	SKBDATA;					\
@@ -115,13 +112,14 @@ bpf_slow_path_byte:
 	test	%rax,%rax;					\
 	pop	SKBDATA;					\
 	pop	%r9;						\
+	FRAME_END;						\
 	jz	bpf_error
 
 bpf_slow_path_word_neg:
 	cmp	SKF_MAX_NEG_OFF, %esi	/* test range */
 	jl	bpf_error	/* offset lower -> error  */
-sk_load_word_negative_offset:
-	.globl	sk_load_word_negative_offset
+
+FUNC(sk_load_word_negative_offset)
 	sk_negative_common(4)
 	mov	(%rax), %eax
 	bswap	%eax
@@ -130,8 +128,8 @@ sk_load_word_negative_offset:
 bpf_slow_path_half_neg:
 	cmp	SKF_MAX_NEG_OFF, %esi
 	jl	bpf_error
-sk_load_half_negative_offset:
-	.globl	sk_load_half_negative_offset
+
+FUNC(sk_load_half_negative_offset)
 	sk_negative_common(2)
 	mov	(%rax),%ax
 	rol	$8,%ax
@@ -141,8 +139,8 @@ sk_load_half_negative_offset:
 bpf_slow_path_byte_neg:
 	cmp	SKF_MAX_NEG_OFF, %esi
 	jl	bpf_error
-sk_load_byte_negative_offset:
-	.globl	sk_load_byte_negative_offset
+
+FUNC(sk_load_byte_negative_offset)
 	sk_negative_common(1)
 	movzbl	(%rax), %eax
 	ret
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 75991979f667..4286f3618bd0 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -193,7 +193,7 @@ struct jit_context {
 	 32 /* space for rbx, r13, r14, r15 */ + \
 	 8 /* space for skb_copy_bits() buffer */)
 
-#define PROLOGUE_SIZE 51
+#define PROLOGUE_SIZE 48
 
 /* emit x64 prologue code for BPF program and check it's size.
  * bpf_tail_call helper will skip it while jumping into another program
@@ -229,11 +229,15 @@ static void emit_prologue(u8 **pprog)
 	/* mov qword ptr [rbp-X],r15 */
 	EMIT3_off32(0x4C, 0x89, 0xBD, -STACKSIZE + 24);
 
-	/* clear A and X registers */
-	EMIT2(0x31, 0xc0); /* xor eax, eax */
-	EMIT3(0x4D, 0x31, 0xED); /* xor r13, r13 */
+	/* Clear the tail call counter (tail_call_cnt): for eBPF tail calls
+	 * we need to reset the counter to 0. It's done in two instructions,
+	 * resetting rax register to 0 (xor on eax gets 0 extended), and
+	 * moving it to the counter location.
+	 */
 
-	/* clear tail_cnt: mov qword ptr [rbp-X], rax */
+	/* xor eax, eax */
+	EMIT2(0x31, 0xc0);
+	/* mov qword ptr [rbp-X], rax */
 	EMIT3_off32(0x48, 0x89, 0x85, -STACKSIZE + 32);
 
 	BUILD_BUG_ON(cnt != PROLOGUE_SIZE);
@@ -455,6 +459,18 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			}
 
 		case BPF_ALU | BPF_MOV | BPF_K:
+			/* optimization: if imm32 is zero, use 'xor <dst>,<dst>'
+			 * to save 3 bytes.
+			 */
+			if (imm32 == 0) {
+				if (is_ereg(dst_reg))
+					EMIT1(add_2mod(0x40, dst_reg, dst_reg));
+				b2 = 0x31; /* xor */
+				b3 = 0xC0;
+				EMIT2(b2, add_2reg(b3, dst_reg, dst_reg));
+				break;
+			}
+
 			/* mov %eax, imm32 */
 			if (is_ereg(dst_reg))
 				EMIT1(add_1mod(0x40, dst_reg));
@@ -469,6 +485,20 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 				return -EINVAL;
 			}
 
+			/* optimization: if imm64 is zero, use 'xor <dst>,<dst>'
+			 * to save 7 bytes.
+			 */
+			if (insn[0].imm == 0 && insn[1].imm == 0) {
+				b1 = add_2mod(0x48, dst_reg, dst_reg);
+				b2 = 0x31; /* xor */
+				b3 = 0xC0;
+				EMIT3(b1, b2, add_2reg(b3, dst_reg, dst_reg));
+
+				insn++;
+				i++;
+				break;
+			}
+
 			/* movabsq %rax, imm64 */
 			EMIT2(add_1mod(0x48, dst_reg), add_1reg(0xB8, dst_reg));
 			EMIT(insn[0].imm, 4);
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index 4e664bdb535a..cb31a4440e58 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -23,12 +23,13 @@ static int backtrace_stack(void *data, char *name)
 	return 0;
 }
 
-static void backtrace_address(void *data, unsigned long addr, int reliable)
+static int backtrace_address(void *data, unsigned long addr, int reliable)
 {
 	unsigned int *depth = data;
 
 	if ((*depth)--)
 		oprofile_add_trace(addr);
+	return 0;
 }
 
 static struct stacktrace_ops backtrace_ops = {
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 1d2e6392f5fa..0e07e0968c3a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -437,7 +437,8 @@ static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 				 void *data)
 {
 	int cpu = (unsigned long)data;
-	switch (action) {
+
+	switch (action & ~CPU_TASKS_FROZEN) {
 	case CPU_DOWN_FAILED:
 	case CPU_ONLINE:
 		smp_call_function_single(cpu, nmi_cpu_up, NULL, 0);
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 50d86c0e9ba4..660a83c8287b 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -24,7 +24,6 @@
 #include <asm/nmi.h>
 #include <asm/apic.h>
 #include <asm/processor.h>
-#include <asm/cpufeature.h>
 
 #include "op_x86_model.h"
 #include "op_counter.h"
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 5c6fc3577a49..97062a635b77 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -23,6 +23,8 @@ obj-y				+= bus_numa.o
 obj-$(CONFIG_AMD_NB)		+= amd_bus.o
 obj-$(CONFIG_PCI_CNB20LE_QUIRK)	+= broadcom_bus.o
 
+obj-$(CONFIG_VMD) += vmd.o
+
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
 endif
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
index 7bcf06a7cd12..6eb3c8af96e2 100644
--- a/arch/x86/pci/bus_numa.c
+++ b/arch/x86/pci/bus_numa.c
@@ -50,18 +50,9 @@ void x86_pci_root_bus_resources(int bus, struct list_head *resources)
 	if (!found)
 		pci_add_resource(resources, &info->busn);
 
-	list_for_each_entry(root_res, &info->resources, list) {
-		struct resource *res;
-		struct resource *root;
+	list_for_each_entry(root_res, &info->resources, list)
+		pci_add_resource(resources, &root_res->res);
 
-		res = &root_res->res;
-		pci_add_resource(resources, res);
-		if (res->flags & IORESOURCE_IO)
-			root = &ioport_resource;
-		else
-			root = &iomem_resource;
-		insert_resource(root, res);
-	}
 	return;
 
 default_resources:
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index eccd4d99e6a4..381a43c40bf7 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -12,7 +12,6 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 
-#include <asm-generic/pci-bridge.h>
 #include <asm/acpi.h>
 #include <asm/segment.h>
 #include <asm/io.h>
@@ -641,6 +640,43 @@ unsigned int pcibios_assign_all_busses(void)
 	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
 }
 
+#if defined(CONFIG_X86_DEV_DMA_OPS) && defined(CONFIG_PCI_DOMAINS)
+static LIST_HEAD(dma_domain_list);
+static DEFINE_SPINLOCK(dma_domain_list_lock);
+
+void add_dma_domain(struct dma_domain *domain)
+{
+	spin_lock(&dma_domain_list_lock);
+	list_add(&domain->node, &dma_domain_list);
+	spin_unlock(&dma_domain_list_lock);
+}
+EXPORT_SYMBOL_GPL(add_dma_domain);
+
+void del_dma_domain(struct dma_domain *domain)
+{
+	spin_lock(&dma_domain_list_lock);
+	list_del(&domain->node);
+	spin_unlock(&dma_domain_list_lock);
+}
+EXPORT_SYMBOL_GPL(del_dma_domain);
+
+static void set_dma_domain_ops(struct pci_dev *pdev)
+{
+	struct dma_domain *domain;
+
+	spin_lock(&dma_domain_list_lock);
+	list_for_each_entry(domain, &dma_domain_list, node) {
+		if (pci_domain_nr(pdev->bus) == domain->domain_nr) {
+			pdev->dev.archdata.dma_ops = domain->dma_ops;
+			break;
+		}
+	}
+	spin_unlock(&dma_domain_list_lock);
+}
+#else
+static void set_dma_domain_ops(struct pci_dev *pdev) {}
+#endif
+
 int pcibios_add_device(struct pci_dev *dev)
 {
 	struct setup_data *data;
@@ -670,31 +706,26 @@ int pcibios_add_device(struct pci_dev *dev)
 		pa_data = data->next;
 		iounmap(data);
 	}
+	set_dma_domain_ops(dev);
 	return 0;
 }
 
-int pcibios_alloc_irq(struct pci_dev *dev)
+int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	/*
-	 * If the PCI device was already claimed by core code and has
-	 * MSI enabled, probing of the pcibios IRQ will overwrite
-	 * dev->irq.  So bail out if MSI is already enabled.
-	 */
-	if (pci_dev_msi_enabled(dev))
-		return -EBUSY;
+	int err;
 
-	return pcibios_enable_irq(dev);
-}
+	if ((err = pci_enable_resources(dev, mask)) < 0)
+		return err;
 
-void pcibios_free_irq(struct pci_dev *dev)
-{
-	if (pcibios_disable_irq)
-		pcibios_disable_irq(dev);
+	if (!pci_dev_msi_enabled(dev))
+		return pcibios_enable_irq(dev);
+	return 0;
 }
 
-int pcibios_enable_device(struct pci_dev *dev, int mask)
+void pcibios_disable_device (struct pci_dev *dev)
 {
-	return pci_enable_resources(dev, mask);
+	if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
+		pcibios_disable_irq(dev);
 }
 
 int pci_ext_cfg_avail(void)
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index e58565556703..b7de1929714b 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -297,14 +297,14 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_MCH_PC1,	pcie_r
  *
  * The standard boot ROM sequence for an x86 machine uses the BIOS
  * to select an initial video card for boot display. This boot video
- * card will have it's BIOS copied to C0000 in system RAM.
+ * card will have its BIOS copied to 0xC0000 in system RAM.
  * IORESOURCE_ROM_SHADOW is used to associate the boot video
  * card with this copy. On laptops this copy has to be used since
  * the main ROM may be compressed or combined with another image.
  * See pci_map_rom() for use of this flag. Before marking the device
  * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
- * by either arch cde or vga-arbitration, if so only apply the fixup to this
- * already determined primary video card.
+ * by either arch code or vga-arbitration; if so only apply the fixup to this
+ * already-determined primary video card.
  */
 
 static void pci_fixup_video(struct pci_dev *pdev)
@@ -312,6 +312,7 @@ static void pci_fixup_video(struct pci_dev *pdev)
 	struct pci_dev *bridge;
 	struct pci_bus *bus;
 	u16 config;
+	struct resource *res;
 
 	/* Is VGA routed to us? */
 	bus = pdev->bus;
@@ -336,8 +337,18 @@ static void pci_fixup_video(struct pci_dev *pdev)
 	if (!vga_default_device() || pdev == vga_default_device()) {
 		pci_read_config_word(pdev, PCI_COMMAND, &config);
 		if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
-			pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-			dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n");
+			res = &pdev->resource[PCI_ROM_RESOURCE];
+
+			pci_disable_rom(pdev);
+			if (res->parent)
+				release_resource(res);
+
+			res->start = 0xC0000;
+			res->end = res->start + 0x20000 - 1;
+			res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
+				     IORESOURCE_PCI_FIXED;
+			dev_info(&pdev->dev, "Video device with shadowed ROM at %pR\n",
+				 res);
 		}
 	}
 }
@@ -540,3 +551,10 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
+
+static void pci_bdwep_bar(struct pci_dev *dev)
+{
+	dev->non_compliant_bars = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar);
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 0d24e7c10145..8b93e634af84 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -215,7 +215,7 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 	int polarity;
 	int ret;
 
-	if (pci_has_managed_irq(dev))
+	if (dev->irq_managed && dev->irq > 0)
 		return 0;
 
 	switch (intel_mid_identify_cpu()) {
@@ -256,13 +256,10 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 
 static void intel_mid_pci_irq_disable(struct pci_dev *dev)
 {
-	if (pci_has_managed_irq(dev)) {
+	if (!mp_should_keep_irq(&dev->dev) && dev->irq_managed &&
+	    dev->irq > 0) {
 		mp_unmap_irq(dev->irq);
 		dev->irq_managed = 0;
-		/*
-		 * Don't reset dev->irq here, otherwise
-		 * intel_mid_pci_irq_enable() will fail on next call.
-		 */
 	}
 }
 
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 32e70343e6fd..9bd115484745 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -1202,7 +1202,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
 			struct pci_dev *temp_dev;
 			int irq;
 
-			if (pci_has_managed_irq(dev))
+			if (dev->irq_managed && dev->irq > 0)
 				return 0;
 
 			irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
@@ -1230,7 +1230,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				pci_set_managed_irq(dev, irq);
+				dev->irq_managed = 1;
+				dev->irq = irq;
 				dev_info(&dev->dev, "PCI->APIC IRQ transform: "
 					 "INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
 				return 0;
@@ -1256,10 +1257,24 @@ static int pirq_enable_irq(struct pci_dev *dev)
 	return 0;
 }
 
+bool mp_should_keep_irq(struct device *dev)
+{
+	if (dev->power.is_prepared)
+		return true;
+#ifdef CONFIG_PM
+	if (dev->power.runtime_status == RPM_SUSPENDING)
+		return true;
+#endif
+
+	return false;
+}
+
 static void pirq_disable_irq(struct pci_dev *dev)
 {
-	if (io_apic_assign_pci_irqs && pci_has_managed_irq(dev)) {
+	if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) &&
+	    dev->irq_managed && dev->irq) {
 		mp_unmap_irq(dev->irq);
-		pci_reset_managed_irq(dev);
+		dev->irq = 0;
+		dev->irq_managed = 0;
 	}
 }
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 9b83b9051ae7..9770e55e768f 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -180,6 +180,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
 	unsigned long result = 0;
 	unsigned long flags;
 	unsigned long bx = (bus << 8) | devfn;
+	u16 number = 0, mask = 0;
 
 	WARN_ON(seg);
 	if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
@@ -189,53 +190,35 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
 
 	switch (len) {
 	case 1:
-		__asm__("lcall *(%%esi); cld\n\t"
-			"jc 1f\n\t"
-			"xor %%ah, %%ah\n"
-			"1:"
-			: "=c" (*value),
-			  "=a" (result)
-			: "1" (PCIBIOS_READ_CONFIG_BYTE),
-			  "b" (bx),
-			  "D" ((long)reg),
-			  "S" (&pci_indirect));
-		/*
-		 * Zero-extend the result beyond 8 bits, do not trust the
-		 * BIOS having done it:
-		 */
-		*value &= 0xff;
+		number = PCIBIOS_READ_CONFIG_BYTE;
+		mask = 0xff;
 		break;
 	case 2:
-		__asm__("lcall *(%%esi); cld\n\t"
-			"jc 1f\n\t"
-			"xor %%ah, %%ah\n"
-			"1:"
-			: "=c" (*value),
-			  "=a" (result)
-			: "1" (PCIBIOS_READ_CONFIG_WORD),
-			  "b" (bx),
-			  "D" ((long)reg),
-			  "S" (&pci_indirect));
-		/*
-		 * Zero-extend the result beyond 16 bits, do not trust the
-		 * BIOS having done it:
-		 */
-		*value &= 0xffff;
+		number = PCIBIOS_READ_CONFIG_WORD;
+		mask = 0xffff;
 		break;
 	case 4:
-		__asm__("lcall *(%%esi); cld\n\t"
-			"jc 1f\n\t"
-			"xor %%ah, %%ah\n"
-			"1:"
-			: "=c" (*value),
-			  "=a" (result)
-			: "1" (PCIBIOS_READ_CONFIG_DWORD),
-			  "b" (bx),
-			  "D" ((long)reg),
-			  "S" (&pci_indirect));
+		number = PCIBIOS_READ_CONFIG_DWORD;
 		break;
 	}
 
+	__asm__("lcall *(%%esi); cld\n\t"
+		"jc 1f\n\t"
+		"xor %%ah, %%ah\n"
+		"1:"
+		: "=c" (*value),
+		  "=a" (result)
+		: "1" (number),
+		  "b" (bx),
+		  "D" ((long)reg),
+		  "S" (&pci_indirect));
+	/*
+	 * Zero-extend the result beyond 8 or 16 bits, do not trust the
+	 * BIOS having done it:
+	 */
+	if (mask)
+		*value &= mask;
+
 	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return (int)((result & 0xff00) >> 8);
@@ -247,6 +230,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
 	unsigned long result = 0;
 	unsigned long flags;
 	unsigned long bx = (bus << 8) | devfn;
+	u16 number = 0;
 
 	WARN_ON(seg);
 	if ((bus > 255) || (devfn > 255) || (reg > 255)) 
@@ -256,43 +240,27 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
 
 	switch (len) {
 	case 1:
-		__asm__("lcall *(%%esi); cld\n\t"
-			"jc 1f\n\t"
-			"xor %%ah, %%ah\n"
-			"1:"
-			: "=a" (result)
-			: "0" (PCIBIOS_WRITE_CONFIG_BYTE),
-			  "c" (value),
-			  "b" (bx),
-			  "D" ((long)reg),
-			  "S" (&pci_indirect));
+		number = PCIBIOS_WRITE_CONFIG_BYTE;
 		break;
 	case 2:
-		__asm__("lcall *(%%esi); cld\n\t"
-			"jc 1f\n\t"
-			"xor %%ah, %%ah\n"
-			"1:"
-			: "=a" (result)
-			: "0" (PCIBIOS_WRITE_CONFIG_WORD),
-			  "c" (value),
-			  "b" (bx),
-			  "D" ((long)reg),
-			  "S" (&pci_indirect));
+		number = PCIBIOS_WRITE_CONFIG_WORD;
 		break;
 	case 4:
-		__asm__("lcall *(%%esi); cld\n\t"
-			"jc 1f\n\t"
-			"xor %%ah, %%ah\n"
-			"1:"
-			: "=a" (result)
-			: "0" (PCIBIOS_WRITE_CONFIG_DWORD),
-			  "c" (value),
-			  "b" (bx),
-			  "D" ((long)reg),
-			  "S" (&pci_indirect));
+		number = PCIBIOS_WRITE_CONFIG_DWORD;
 		break;
 	}
 
+	__asm__("lcall *(%%esi); cld\n\t"
+		"jc 1f\n\t"
+		"xor %%ah, %%ah\n"
+		"1:"
+		: "=a" (result)
+		: "0" (number),
+		  "c" (value),
+		  "b" (bx),
+		  "D" ((long)reg),
+		  "S" (&pci_indirect));
+
 	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	return (int)((result & 0xff00) >> 8);
diff --git a/arch/x86/pci/vmd.c b/arch/x86/pci/vmd.c
new file mode 100644
index 000000000000..7792aba266df
--- /dev/null
+++ b/arch/x86/pci/vmd.c
@@ -0,0 +1,756 @@
+/*
+ * Volume Management Device driver
+ * Copyright (c) 2015, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+
+#include <asm/irqdomain.h>
+#include <asm/device.h>
+#include <asm/msi.h>
+#include <asm/msidef.h>
+
+#define VMD_CFGBAR	0
+#define VMD_MEMBAR1	2
+#define VMD_MEMBAR2	4
+
+/*
+ * Lock for manipulating VMD IRQ lists.
+ */
+static DEFINE_RAW_SPINLOCK(list_lock);
+
+/**
+ * struct vmd_irq - private data to map driver IRQ to the VMD shared vector
+ * @node:	list item for parent traversal.
+ * @rcu:	RCU callback item for freeing.
+ * @irq:	back pointer to parent.
+ * @virq:	the virtual IRQ value provided to the requesting driver.
+ *
+ * Every MSI/MSI-X IRQ requested for a device in a VMD domain will be mapped to
+ * a VMD IRQ using this structure.
+ */
+struct vmd_irq {
+	struct list_head	node;
+	struct rcu_head		rcu;
+	struct vmd_irq_list	*irq;
+	unsigned int		virq;
+};
+
+/**
+ * struct vmd_irq_list - list of driver requested IRQs mapping to a VMD vector
+ * @irq_list:	the list of irq's the VMD one demuxes to.
+ * @vmd_vector:	the h/w IRQ assigned to the VMD.
+ * @index:	index into the VMD MSI-X table; used for message routing.
+ * @count:	number of child IRQs assigned to this vector; used to track
+ *		sharing.
+ */
+struct vmd_irq_list {
+	struct list_head	irq_list;
+	struct vmd_dev		*vmd;
+	unsigned int		vmd_vector;
+	unsigned int		index;
+	unsigned int		count;
+};
+
+struct vmd_dev {
+	struct pci_dev		*dev;
+
+	spinlock_t		cfg_lock;
+	char __iomem		*cfgbar;
+
+	int msix_count;
+	struct msix_entry	*msix_entries;
+	struct vmd_irq_list	*irqs;
+
+	struct pci_sysdata	sysdata;
+	struct resource		resources[3];
+	struct irq_domain	*irq_domain;
+	struct pci_bus		*bus;
+
+#ifdef CONFIG_X86_DEV_DMA_OPS
+	struct dma_map_ops	dma_ops;
+	struct dma_domain	dma_domain;
+#endif
+};
+
+static inline struct vmd_dev *vmd_from_bus(struct pci_bus *bus)
+{
+	return container_of(bus->sysdata, struct vmd_dev, sysdata);
+}
+
+/*
+ * Drivers managing a device in a VMD domain allocate their own IRQs as before,
+ * but the MSI entry for the hardware it's driving will be programmed with a
+ * destination ID for the VMD MSI-X table.  The VMD muxes interrupts in its
+ * domain into one of its own, and the VMD driver de-muxes these for the
+ * handlers sharing that VMD IRQ.  The vmd irq_domain provides the operations
+ * and irq_chip to set this up.
+ */
+static void vmd_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	struct vmd_irq *vmdirq = data->chip_data;
+	struct vmd_irq_list *irq = vmdirq->irq;
+
+	msg->address_hi = MSI_ADDR_BASE_HI;
+	msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_DEST_ID(irq->index);
+	msg->data = 0;
+}
+
+/*
+ * We rely on MSI_FLAG_USE_DEF_CHIP_OPS to set the IRQ mask/unmask ops.
+ */
+static void vmd_irq_enable(struct irq_data *data)
+{
+	struct vmd_irq *vmdirq = data->chip_data;
+
+	raw_spin_lock(&list_lock);
+	list_add_tail_rcu(&vmdirq->node, &vmdirq->irq->irq_list);
+	raw_spin_unlock(&list_lock);
+
+	data->chip->irq_unmask(data);
+}
+
+static void vmd_irq_disable(struct irq_data *data)
+{
+	struct vmd_irq *vmdirq = data->chip_data;
+
+	data->chip->irq_mask(data);
+
+	raw_spin_lock(&list_lock);
+	list_del_rcu(&vmdirq->node);
+	raw_spin_unlock(&list_lock);
+}
+
+/*
+ * XXX: Stubbed until we develop acceptable way to not create conflicts with
+ * other devices sharing the same vector.
+ */
+static int vmd_irq_set_affinity(struct irq_data *data,
+				const struct cpumask *dest, bool force)
+{
+	return -EINVAL;
+}
+
+static struct irq_chip vmd_msi_controller = {
+	.name			= "VMD-MSI",
+	.irq_enable		= vmd_irq_enable,
+	.irq_disable		= vmd_irq_disable,
+	.irq_compose_msi_msg	= vmd_compose_msi_msg,
+	.irq_set_affinity	= vmd_irq_set_affinity,
+};
+
+static irq_hw_number_t vmd_get_hwirq(struct msi_domain_info *info,
+				     msi_alloc_info_t *arg)
+{
+	return 0;
+}
+
+/*
+ * XXX: We can be even smarter selecting the best IRQ once we solve the
+ * affinity problem.
+ */
+static struct vmd_irq_list *vmd_next_irq(struct vmd_dev *vmd)
+{
+	int i, best = 0;
+
+	raw_spin_lock(&list_lock);
+	for (i = 1; i < vmd->msix_count; i++)
+		if (vmd->irqs[i].count < vmd->irqs[best].count)
+			best = i;
+	vmd->irqs[best].count++;
+	raw_spin_unlock(&list_lock);
+
+	return &vmd->irqs[best];
+}
+
+static int vmd_msi_init(struct irq_domain *domain, struct msi_domain_info *info,
+			unsigned int virq, irq_hw_number_t hwirq,
+			msi_alloc_info_t *arg)
+{
+	struct vmd_dev *vmd = vmd_from_bus(msi_desc_to_pci_dev(arg->desc)->bus);
+	struct vmd_irq *vmdirq = kzalloc(sizeof(*vmdirq), GFP_KERNEL);
+
+	if (!vmdirq)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&vmdirq->node);
+	vmdirq->irq = vmd_next_irq(vmd);
+	vmdirq->virq = virq;
+
+	irq_domain_set_info(domain, virq, vmdirq->irq->vmd_vector, info->chip,
+			    vmdirq, handle_simple_irq, vmd, NULL);
+	return 0;
+}
+
+static void vmd_msi_free(struct irq_domain *domain,
+			struct msi_domain_info *info, unsigned int virq)
+{
+	struct vmd_irq *vmdirq = irq_get_chip_data(virq);
+
+	/* XXX: Potential optimization to rebalance */
+	raw_spin_lock(&list_lock);
+	vmdirq->irq->count--;
+	raw_spin_unlock(&list_lock);
+
+	kfree_rcu(vmdirq, rcu);
+}
+
+static int vmd_msi_prepare(struct irq_domain *domain, struct device *dev,
+			   int nvec, msi_alloc_info_t *arg)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct vmd_dev *vmd = vmd_from_bus(pdev->bus);
+
+	if (nvec > vmd->msix_count)
+		return vmd->msix_count;
+
+	memset(arg, 0, sizeof(*arg));
+	return 0;
+}
+
+static void vmd_set_desc(msi_alloc_info_t *arg, struct msi_desc *desc)
+{
+	arg->desc = desc;
+}
+
+static struct msi_domain_ops vmd_msi_domain_ops = {
+	.get_hwirq	= vmd_get_hwirq,
+	.msi_init	= vmd_msi_init,
+	.msi_free	= vmd_msi_free,
+	.msi_prepare	= vmd_msi_prepare,
+	.set_desc	= vmd_set_desc,
+};
+
+static struct msi_domain_info vmd_msi_domain_info = {
+	.flags		= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+			  MSI_FLAG_PCI_MSIX,
+	.ops		= &vmd_msi_domain_ops,
+	.chip		= &vmd_msi_controller,
+};
+
+#ifdef CONFIG_X86_DEV_DMA_OPS
+/*
+ * VMD replaces the requester ID with its own.  DMA mappings for devices in a
+ * VMD domain need to be mapped for the VMD, not the device requiring
+ * the mapping.
+ */
+static struct device *to_vmd_dev(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct vmd_dev *vmd = vmd_from_bus(pdev->bus);
+
+	return &vmd->dev->dev;
+}
+
+static struct dma_map_ops *vmd_dma_ops(struct device *dev)
+{
+	return to_vmd_dev(dev)->archdata.dma_ops;
+}
+
+static void *vmd_alloc(struct device *dev, size_t size, dma_addr_t *addr,
+		       gfp_t flag, struct dma_attrs *attrs)
+{
+	return vmd_dma_ops(dev)->alloc(to_vmd_dev(dev), size, addr, flag,
+				       attrs);
+}
+
+static void vmd_free(struct device *dev, size_t size, void *vaddr,
+		     dma_addr_t addr, struct dma_attrs *attrs)
+{
+	return vmd_dma_ops(dev)->free(to_vmd_dev(dev), size, vaddr, addr,
+				      attrs);
+}
+
+static int vmd_mmap(struct device *dev, struct vm_area_struct *vma,
+		    void *cpu_addr, dma_addr_t addr, size_t size,
+		    struct dma_attrs *attrs)
+{
+	return vmd_dma_ops(dev)->mmap(to_vmd_dev(dev), vma, cpu_addr, addr,
+				      size, attrs);
+}
+
+static int vmd_get_sgtable(struct device *dev, struct sg_table *sgt,
+			   void *cpu_addr, dma_addr_t addr, size_t size,
+			   struct dma_attrs *attrs)
+{
+	return vmd_dma_ops(dev)->get_sgtable(to_vmd_dev(dev), sgt, cpu_addr,
+					     addr, size, attrs);
+}
+
+static dma_addr_t vmd_map_page(struct device *dev, struct page *page,
+			       unsigned long offset, size_t size,
+			       enum dma_data_direction dir,
+			       struct dma_attrs *attrs)
+{
+	return vmd_dma_ops(dev)->map_page(to_vmd_dev(dev), page, offset, size,
+					  dir, attrs);
+}
+
+static void vmd_unmap_page(struct device *dev, dma_addr_t addr, size_t size,
+			   enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	vmd_dma_ops(dev)->unmap_page(to_vmd_dev(dev), addr, size, dir, attrs);
+}
+
+static int vmd_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	return vmd_dma_ops(dev)->map_sg(to_vmd_dev(dev), sg, nents, dir, attrs);
+}
+
+static void vmd_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+			 enum dma_data_direction dir, struct dma_attrs *attrs)
+{
+	vmd_dma_ops(dev)->unmap_sg(to_vmd_dev(dev), sg, nents, dir, attrs);
+}
+
+static void vmd_sync_single_for_cpu(struct device *dev, dma_addr_t addr,
+				    size_t size, enum dma_data_direction dir)
+{
+	vmd_dma_ops(dev)->sync_single_for_cpu(to_vmd_dev(dev), addr, size, dir);
+}
+
+static void vmd_sync_single_for_device(struct device *dev, dma_addr_t addr,
+				       size_t size, enum dma_data_direction dir)
+{
+	vmd_dma_ops(dev)->sync_single_for_device(to_vmd_dev(dev), addr, size,
+						 dir);
+}
+
+static void vmd_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction dir)
+{
+	vmd_dma_ops(dev)->sync_sg_for_cpu(to_vmd_dev(dev), sg, nents, dir);
+}
+
+static void vmd_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+				   int nents, enum dma_data_direction dir)
+{
+	vmd_dma_ops(dev)->sync_sg_for_device(to_vmd_dev(dev), sg, nents, dir);
+}
+
+static int vmd_mapping_error(struct device *dev, dma_addr_t addr)
+{
+	return vmd_dma_ops(dev)->mapping_error(to_vmd_dev(dev), addr);
+}
+
+static int vmd_dma_supported(struct device *dev, u64 mask)
+{
+	return vmd_dma_ops(dev)->dma_supported(to_vmd_dev(dev), mask);
+}
+
+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
+static u64 vmd_get_required_mask(struct device *dev)
+{
+	return vmd_dma_ops(dev)->get_required_mask(to_vmd_dev(dev));
+}
+#endif
+
+static void vmd_teardown_dma_ops(struct vmd_dev *vmd)
+{
+	struct dma_domain *domain = &vmd->dma_domain;
+
+	if (vmd->dev->dev.archdata.dma_ops)
+		del_dma_domain(domain);
+}
+
+#define ASSIGN_VMD_DMA_OPS(source, dest, fn)	\
+	do {					\
+		if (source->fn)			\
+			dest->fn = vmd_##fn;	\
+	} while (0)
+
+static void vmd_setup_dma_ops(struct vmd_dev *vmd)
+{
+	const struct dma_map_ops *source = vmd->dev->dev.archdata.dma_ops;
+	struct dma_map_ops *dest = &vmd->dma_ops;
+	struct dma_domain *domain = &vmd->dma_domain;
+
+	domain->domain_nr = vmd->sysdata.domain;
+	domain->dma_ops = dest;
+
+	if (!source)
+		return;
+	ASSIGN_VMD_DMA_OPS(source, dest, alloc);
+	ASSIGN_VMD_DMA_OPS(source, dest, free);
+	ASSIGN_VMD_DMA_OPS(source, dest, mmap);
+	ASSIGN_VMD_DMA_OPS(source, dest, get_sgtable);
+	ASSIGN_VMD_DMA_OPS(source, dest, map_page);
+	ASSIGN_VMD_DMA_OPS(source, dest, unmap_page);
+	ASSIGN_VMD_DMA_OPS(source, dest, map_sg);
+	ASSIGN_VMD_DMA_OPS(source, dest, unmap_sg);
+	ASSIGN_VMD_DMA_OPS(source, dest, sync_single_for_cpu);
+	ASSIGN_VMD_DMA_OPS(source, dest, sync_single_for_device);
+	ASSIGN_VMD_DMA_OPS(source, dest, sync_sg_for_cpu);
+	ASSIGN_VMD_DMA_OPS(source, dest, sync_sg_for_device);
+	ASSIGN_VMD_DMA_OPS(source, dest, mapping_error);
+	ASSIGN_VMD_DMA_OPS(source, dest, dma_supported);
+#ifdef ARCH_HAS_DMA_GET_REQUIRED_MASK
+	ASSIGN_VMD_DMA_OPS(source, dest, get_required_mask);
+#endif
+	add_dma_domain(domain);
+}
+#undef ASSIGN_VMD_DMA_OPS
+#else
+static void vmd_teardown_dma_ops(struct vmd_dev *vmd) {}
+static void vmd_setup_dma_ops(struct vmd_dev *vmd) {}
+#endif
+
+static char __iomem *vmd_cfg_addr(struct vmd_dev *vmd, struct pci_bus *bus,
+				  unsigned int devfn, int reg, int len)
+{
+	char __iomem *addr = vmd->cfgbar +
+			     (bus->number << 20) + (devfn << 12) + reg;
+
+	if ((addr - vmd->cfgbar) + len >=
+	    resource_size(&vmd->dev->resource[VMD_CFGBAR]))
+		return NULL;
+
+	return addr;
+}
+
+/*
+ * CPU may deadlock if config space is not serialized on some versions of this
+ * hardware, so all config space access is done under a spinlock.
+ */
+static int vmd_pci_read(struct pci_bus *bus, unsigned int devfn, int reg,
+			int len, u32 *value)
+{
+	struct vmd_dev *vmd = vmd_from_bus(bus);
+	char __iomem *addr = vmd_cfg_addr(vmd, bus, devfn, reg, len);
+	unsigned long flags;
+	int ret = 0;
+
+	if (!addr)
+		return -EFAULT;
+
+	spin_lock_irqsave(&vmd->cfg_lock, flags);
+	switch (len) {
+	case 1:
+		*value = readb(addr);
+		break;
+	case 2:
+		*value = readw(addr);
+		break;
+	case 4:
+		*value = readl(addr);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	spin_unlock_irqrestore(&vmd->cfg_lock, flags);
+	return ret;
+}
+
+/*
+ * VMD h/w converts non-posted config writes to posted memory writes. The
+ * read-back in this function forces the completion so it returns only after
+ * the config space was written, as expected.
+ */
+static int vmd_pci_write(struct pci_bus *bus, unsigned int devfn, int reg,
+			 int len, u32 value)
+{
+	struct vmd_dev *vmd = vmd_from_bus(bus);
+	char __iomem *addr = vmd_cfg_addr(vmd, bus, devfn, reg, len);
+	unsigned long flags;
+	int ret = 0;
+
+	if (!addr)
+		return -EFAULT;
+
+	spin_lock_irqsave(&vmd->cfg_lock, flags);
+	switch (len) {
+	case 1:
+		writeb(value, addr);
+		readb(addr);
+		break;
+	case 2:
+		writew(value, addr);
+		readw(addr);
+		break;
+	case 4:
+		writel(value, addr);
+		readl(addr);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	spin_unlock_irqrestore(&vmd->cfg_lock, flags);
+	return ret;
+}
+
+static struct pci_ops vmd_ops = {
+	.read		= vmd_pci_read,
+	.write		= vmd_pci_write,
+};
+
+static void vmd_attach_resources(struct vmd_dev *vmd)
+{
+	vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
+	vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
+}
+
+static void vmd_detach_resources(struct vmd_dev *vmd)
+{
+	vmd->dev->resource[VMD_MEMBAR1].child = NULL;
+	vmd->dev->resource[VMD_MEMBAR2].child = NULL;
+}
+
+/*
+ * VMD domains start at 0x1000 to not clash with ACPI _SEG domains.
+ */
+static int vmd_find_free_domain(void)
+{
+	int domain = 0xffff;
+	struct pci_bus *bus = NULL;
+
+	while ((bus = pci_find_next_bus(bus)) != NULL)
+		domain = max_t(int, domain, pci_domain_nr(bus));
+	return domain + 1;
+}
+
+static int vmd_enable_domain(struct vmd_dev *vmd)
+{
+	struct pci_sysdata *sd = &vmd->sysdata;
+	struct resource *res;
+	u32 upper_bits;
+	unsigned long flags;
+	LIST_HEAD(resources);
+
+	res = &vmd->dev->resource[VMD_CFGBAR];
+	vmd->resources[0] = (struct resource) {
+		.name  = "VMD CFGBAR",
+		.start = 0,
+		.end   = (resource_size(res) >> 20) - 1,
+		.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
+	};
+
+	/*
+	 * If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
+	 * put 32-bit resources in the window.
+	 *
+	 * There's no hardware reason why a 64-bit window *couldn't*
+	 * contain a 32-bit resource, but pbus_size_mem() computes the
+	 * bridge window size assuming a 64-bit window will contain no
+	 * 32-bit resources.  __pci_assign_resource() enforces that
+	 * artificial restriction to make sure everything will fit.
+	 *
+	 * The only way we could use a 64-bit non-prefechable MEMBAR is
+	 * if its address is <4GB so that we can convert it to a 32-bit
+	 * resource.  To be visible to the host OS, all VMD endpoints must
+	 * be initially configured by platform BIOS, which includes setting
+	 * up these resources.  We can assume the device is configured
+	 * according to the platform needs.
+	 */
+	res = &vmd->dev->resource[VMD_MEMBAR1];
+	upper_bits = upper_32_bits(res->end);
+	flags = res->flags & ~IORESOURCE_SIZEALIGN;
+	if (!upper_bits)
+		flags &= ~IORESOURCE_MEM_64;
+	vmd->resources[1] = (struct resource) {
+		.name  = "VMD MEMBAR1",
+		.start = res->start,
+		.end   = res->end,
+		.flags = flags,
+		.parent = res,
+	};
+
+	res = &vmd->dev->resource[VMD_MEMBAR2];
+	upper_bits = upper_32_bits(res->end);
+	flags = res->flags & ~IORESOURCE_SIZEALIGN;
+	if (!upper_bits)
+		flags &= ~IORESOURCE_MEM_64;
+	vmd->resources[2] = (struct resource) {
+		.name  = "VMD MEMBAR2",
+		.start = res->start + 0x2000,
+		.end   = res->end,
+		.flags = flags,
+		.parent = res,
+	};
+
+	sd->domain = vmd_find_free_domain();
+	if (sd->domain < 0)
+		return sd->domain;
+
+	sd->node = pcibus_to_node(vmd->dev->bus);
+
+	vmd->irq_domain = pci_msi_create_irq_domain(NULL, &vmd_msi_domain_info,
+						    NULL);
+	if (!vmd->irq_domain)
+		return -ENODEV;
+
+	pci_add_resource(&resources, &vmd->resources[0]);
+	pci_add_resource(&resources, &vmd->resources[1]);
+	pci_add_resource(&resources, &vmd->resources[2]);
+	vmd->bus = pci_create_root_bus(&vmd->dev->dev, 0, &vmd_ops, sd,
+				       &resources);
+	if (!vmd->bus) {
+		pci_free_resource_list(&resources);
+		irq_domain_remove(vmd->irq_domain);
+		return -ENODEV;
+	}
+
+	vmd_attach_resources(vmd);
+	vmd_setup_dma_ops(vmd);
+	dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
+	pci_rescan_bus(vmd->bus);
+
+	WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
+			       "domain"), "Can't create symlink to domain\n");
+	return 0;
+}
+
+static irqreturn_t vmd_irq(int irq, void *data)
+{
+	struct vmd_irq_list *irqs = data;
+	struct vmd_irq *vmdirq;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(vmdirq, &irqs->irq_list, node)
+		generic_handle_irq(vmdirq->virq);
+	rcu_read_unlock();
+
+	return IRQ_HANDLED;
+}
+
+static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	struct vmd_dev *vmd;
+	int i, err;
+
+	if (resource_size(&dev->resource[VMD_CFGBAR]) < (1 << 20))
+		return -ENOMEM;
+
+	vmd = devm_kzalloc(&dev->dev, sizeof(*vmd), GFP_KERNEL);
+	if (!vmd)
+		return -ENOMEM;
+
+	vmd->dev = dev;
+	err = pcim_enable_device(dev);
+	if (err < 0)
+		return err;
+
+	vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0);
+	if (!vmd->cfgbar)
+		return -ENOMEM;
+
+	pci_set_master(dev);
+	if (dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(64)) &&
+	    dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)))
+		return -ENODEV;
+
+	vmd->msix_count = pci_msix_vec_count(dev);
+	if (vmd->msix_count < 0)
+		return -ENODEV;
+
+	vmd->irqs = devm_kcalloc(&dev->dev, vmd->msix_count, sizeof(*vmd->irqs),
+				 GFP_KERNEL);
+	if (!vmd->irqs)
+		return -ENOMEM;
+
+	vmd->msix_entries = devm_kcalloc(&dev->dev, vmd->msix_count,
+					 sizeof(*vmd->msix_entries),
+					 GFP_KERNEL);
+	if (!vmd->msix_entries)
+		return -ENOMEM;
+	for (i = 0; i < vmd->msix_count; i++)
+		vmd->msix_entries[i].entry = i;
+
+	vmd->msix_count = pci_enable_msix_range(vmd->dev, vmd->msix_entries, 1,
+						vmd->msix_count);
+	if (vmd->msix_count < 0)
+		return vmd->msix_count;
+
+	for (i = 0; i < vmd->msix_count; i++) {
+		INIT_LIST_HEAD(&vmd->irqs[i].irq_list);
+		vmd->irqs[i].vmd_vector = vmd->msix_entries[i].vector;
+		vmd->irqs[i].index = i;
+
+		err = devm_request_irq(&dev->dev, vmd->irqs[i].vmd_vector,
+				       vmd_irq, 0, "vmd", &vmd->irqs[i]);
+		if (err)
+			return err;
+	}
+
+	spin_lock_init(&vmd->cfg_lock);
+	pci_set_drvdata(dev, vmd);
+	err = vmd_enable_domain(vmd);
+	if (err)
+		return err;
+
+	dev_info(&vmd->dev->dev, "Bound to PCI domain %04x\n",
+		 vmd->sysdata.domain);
+	return 0;
+}
+
+static void vmd_remove(struct pci_dev *dev)
+{
+	struct vmd_dev *vmd = pci_get_drvdata(dev);
+
+	vmd_detach_resources(vmd);
+	pci_set_drvdata(dev, NULL);
+	sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
+	pci_stop_root_bus(vmd->bus);
+	pci_remove_root_bus(vmd->bus);
+	vmd_teardown_dma_ops(vmd);
+	irq_domain_remove(vmd->irq_domain);
+}
+
+#ifdef CONFIG_PM
+static int vmd_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	pci_save_state(pdev);
+	return 0;
+}
+
+static int vmd_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	pci_restore_state(pdev);
+	return 0;
+}
+#endif
+static SIMPLE_DEV_PM_OPS(vmd_dev_pm_ops, vmd_suspend, vmd_resume);
+
+static const struct pci_device_id vmd_ids[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x201d),},
+	{0,}
+};
+MODULE_DEVICE_TABLE(pci, vmd_ids);
+
+static struct pci_driver vmd_drv = {
+	.name		= "vmd",
+	.id_table	= vmd_ids,
+	.probe		= vmd_probe,
+	.remove		= vmd_remove,
+	.driver		= {
+		.pm	= &vmd_dev_pm_ops,
+	},
+};
+module_pci_driver(vmd_drv);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.6");
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index ff31ab464213..beac4dfdade6 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -196,7 +196,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	return 0;
 
 error:
-	dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
+	if (ret == -ENOSYS)
+		dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
+	else if (ret)
+		dev_err(&dev->dev, "Xen PCI frontend error: %d!\n", ret);
 free:
 	kfree(v);
 	return ret;
diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c
index 5ca8ead91579..81c769e80614 100644
--- a/arch/x86/platform/atom/punit_atom_debug.c
+++ b/arch/x86/platform/atom/punit_atom_debug.c
@@ -25,8 +25,6 @@
 #include <asm/cpu_device_id.h>
 #include <asm/iosf_mbi.h>
 
-/* Side band Interface port */
-#define PUNIT_PORT		0x04
 /* Power gate status reg */
 #define PWRGT_STATUS		0x61
 /* Subsystem config/status Video processor */
@@ -85,9 +83,8 @@ static int punit_dev_state_show(struct seq_file *seq_file, void *unused)
 
 	seq_puts(seq_file, "\n\nPUNIT NORTH COMPLEX DEVICES :\n");
 	while (punit_devp->name) {
-		status = iosf_mbi_read(PUNIT_PORT, BT_MBI_PMC_READ,
-				       punit_devp->reg,
-				       &punit_pwr_status);
+		status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+				       punit_devp->reg, &punit_pwr_status);
 		if (status) {
 			seq_printf(seq_file, "%9s : Read Failed\n",
 				   punit_devp->name);
diff --git a/arch/x86/platform/efi/Makefile b/arch/x86/platform/efi/Makefile
index 2846aaab5103..066619b0700c 100644
--- a/arch/x86/platform/efi/Makefile
+++ b/arch/x86/platform/efi/Makefile
@@ -1,3 +1,5 @@
+OBJECT_FILES_NON_STANDARD_efi_thunk_$(BITS).o := y
+
 obj-$(CONFIG_EFI) 		+= quirks.o efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_ACPI_BGRT) += efi-bgrt.o
 obj-$(CONFIG_EARLY_PRINTK_EFI)	+= early_printk.o
diff --git a/arch/x86/platform/efi/efi-bgrt.c b/arch/x86/platform/efi/efi-bgrt.c
index ea48449b2e63..a2433817c987 100644
--- a/arch/x86/platform/efi/efi-bgrt.c
+++ b/arch/x86/platform/efi/efi-bgrt.c
@@ -10,6 +10,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/acpi.h>
@@ -28,8 +31,7 @@ struct bmp_header {
 void __init efi_bgrt_init(void)
 {
 	acpi_status status;
-	void __iomem *image;
-	bool ioremapped = false;
+	void *image;
 	struct bmp_header bmp_header;
 
 	if (acpi_disabled)
@@ -55,11 +57,6 @@ void __init efi_bgrt_init(void)
 		       bgrt_tab->status);
 		return;
 	}
-	if (bgrt_tab->status != 1) {
-		pr_debug("Ignoring BGRT: invalid status %u (expected 1)\n",
-			 bgrt_tab->status);
-		return;
-	}
 	if (bgrt_tab->image_type != 0) {
 		pr_err("Ignoring BGRT: invalid image type %u (expected 0)\n",
 		       bgrt_tab->image_type);
@@ -70,20 +67,19 @@ void __init efi_bgrt_init(void)
 		return;
 	}
 
-	image = efi_lookup_mapped_addr(bgrt_tab->image_address);
+	image = memremap(bgrt_tab->image_address, sizeof(bmp_header), MEMREMAP_WB);
 	if (!image) {
-		image = early_ioremap(bgrt_tab->image_address,
-				       sizeof(bmp_header));
-		ioremapped = true;
-		if (!image) {
-			pr_err("Ignoring BGRT: failed to map image header memory\n");
-			return;
-		}
+		pr_err("Ignoring BGRT: failed to map image header memory\n");
+		return;
 	}
 
-	memcpy_fromio(&bmp_header, image, sizeof(bmp_header));
-	if (ioremapped)
-		early_iounmap(image, sizeof(bmp_header));
+	memcpy(&bmp_header, image, sizeof(bmp_header));
+	memunmap(image);
+	if (bmp_header.id != 0x4d42) {
+		pr_err("Ignoring BGRT: Incorrect BMP magic number 0x%x (expected 0x4d42)\n",
+			bmp_header.id);
+		return;
+	}
 	bgrt_image_size = bmp_header.size;
 
 	bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL | __GFP_NOWARN);
@@ -93,18 +89,14 @@ void __init efi_bgrt_init(void)
 		return;
 	}
 
-	if (ioremapped) {
-		image = early_ioremap(bgrt_tab->image_address,
-				       bmp_header.size);
-		if (!image) {
-			pr_err("Ignoring BGRT: failed to map image memory\n");
-			kfree(bgrt_image);
-			bgrt_image = NULL;
-			return;
-		}
+	image = memremap(bgrt_tab->image_address, bmp_header.size, MEMREMAP_WB);
+	if (!image) {
+		pr_err("Ignoring BGRT: failed to map image memory\n");
+		kfree(bgrt_image);
+		bgrt_image = NULL;
+		return;
 	}
 
-	memcpy_fromio(bgrt_image, image, bgrt_image_size);
-	if (ioremapped)
-		early_iounmap(image, bmp_header.size);
+	memcpy(bgrt_image, image, bgrt_image_size);
+	memunmap(image);
 }
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index ad285404ea7f..994a7df84a7b 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -235,10 +235,10 @@ void __init efi_print_memmap(void)
 		char buf[64];
 
 		md = p;
-		pr_info("mem%02u: %s range=[0x%016llx-0x%016llx) (%lluMB)\n",
+		pr_info("mem%02u: %s range=[0x%016llx-0x%016llx] (%lluMB)\n",
 			i, efi_md_typeattr_format(buf, sizeof(buf), md),
 			md->phys_addr,
-			md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
+			md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1,
 			(md->num_pages >> (20 - EFI_PAGE_SHIFT)));
 	}
 #endif  /*  EFI_DEBUG  */
@@ -815,6 +815,7 @@ static void __init kexec_enter_virtual_mode(void)
 {
 #ifdef CONFIG_KEXEC_CORE
 	efi_memory_desc_t *md;
+	unsigned int num_pages;
 	void *p;
 
 	efi.systab = NULL;
@@ -829,6 +830,12 @@ static void __init kexec_enter_virtual_mode(void)
 		return;
 	}
 
+	if (efi_alloc_page_tables()) {
+		pr_err("Failed to allocate EFI page tables\n");
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return;
+	}
+
 	/*
 	* Map efi regions which were passed via setup_data. The virt_addr is a
 	* fixed addr which was used in first kernel of a kexec boot.
@@ -843,6 +850,14 @@ static void __init kexec_enter_virtual_mode(void)
 
 	BUG_ON(!efi.systab);
 
+	num_pages = ALIGN(memmap.nr_map * memmap.desc_size, PAGE_SIZE);
+	num_pages >>= PAGE_SHIFT;
+
+	if (efi_setup_page_tables(memmap.phys_map, num_pages)) {
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return;
+	}
+
 	efi_sync_low_kernel_mappings();
 
 	/*
@@ -869,7 +884,7 @@ static void __init kexec_enter_virtual_mode(void)
  * This function will switch the EFI runtime services to virtual mode.
  * Essentially, we look through the EFI memmap and map every region that
  * has the runtime attribute bit set in its memory descriptor into the
- * ->trampoline_pgd page table using a top-down VA allocation scheme.
+ * efi_pgd page table.
  *
  * The old method which used to update that memory descriptor with the
  * virtual address obtained from ioremap() is still supported when the
@@ -879,8 +894,8 @@ static void __init kexec_enter_virtual_mode(void)
  *
  * The new method does a pagetable switch in a preemption-safe manner
  * so that we're in a different address space when calling a runtime
- * function. For function arguments passing we do copy the PGDs of the
- * kernel page table into ->trampoline_pgd prior to each call.
+ * function. For function arguments passing we do copy the PUDs of the
+ * kernel page table into efi_pgd prior to each call.
  *
  * Specially for kexec boot, efi runtime maps in previous kernel should
  * be passed in via setup_data. In that case runtime ranges will be mapped
@@ -895,6 +910,12 @@ static void __init __efi_enter_virtual_mode(void)
 
 	efi.systab = NULL;
 
+	if (efi_alloc_page_tables()) {
+		pr_err("Failed to allocate EFI page tables\n");
+		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
+		return;
+	}
+
 	efi_merge_regions();
 	new_memmap = efi_map_regions(&count, &pg_shift);
 	if (!new_memmap) {
@@ -913,7 +934,6 @@ static void __init __efi_enter_virtual_mode(void)
 	}
 
 	efi_sync_low_kernel_mappings();
-	efi_dump_pagetable();
 
 	if (efi_is_native()) {
 		status = phys_efi_set_virtual_address_map(
@@ -951,31 +971,20 @@ static void __init __efi_enter_virtual_mode(void)
 
 	efi.set_virtual_address_map = NULL;
 
-	efi_runtime_mkexec();
+	/*
+	 * Apply more restrictive page table mapping attributes now that
+	 * SVAM() has been called and the firmware has performed all
+	 * necessary relocation fixups for the new virtual addresses.
+	 */
+	efi_runtime_update_mappings();
+	efi_dump_pagetable();
 
 	/*
-	 * We mapped the descriptor array into the EFI pagetable above but we're
-	 * not unmapping it here. Here's why:
-	 *
-	 * We're copying select PGDs from the kernel page table to the EFI page
-	 * table and when we do so and make changes to those PGDs like unmapping
-	 * stuff from them, those changes appear in the kernel page table and we
-	 * go boom.
-	 *
-	 * From setup_real_mode():
-	 *
-	 * ...
-	 * trampoline_pgd[0] = init_level4_pgt[pgd_index(__PAGE_OFFSET)].pgd;
-	 *
-	 * In this particular case, our allocation is in PGD 0 of the EFI page
-	 * table but we've copied that PGD from PGD[272] of the EFI page table:
-	 *
-	 *	pgd_index(__PAGE_OFFSET = 0xffff880000000000) = 272
-	 *
-	 * where the direct memory mapping in kernel space is.
-	 *
-	 * new_memmap's VA comes from that direct mapping and thus clearing it,
-	 * it would get cleared in the kernel page table too.
+	 * We mapped the descriptor array into the EFI pagetable above
+	 * but we're not unmapping it here because if we're running in
+	 * EFI mixed mode we need all of memory to be accessible when
+	 * we pass parameters to the EFI runtime services in the
+	 * thunking code.
 	 *
 	 * efi_cleanup_page_tables(__pa(new_memmap), 1 << pg_shift);
 	 */
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index ed5b67338294..338402b91d2e 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -38,6 +38,11 @@
  * say 0 - 3G.
  */
 
+int __init efi_alloc_page_tables(void)
+{
+	return 0;
+}
+
 void efi_sync_low_kernel_mappings(void) {}
 void __init efi_dump_pagetable(void) {}
 int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
@@ -85,7 +90,7 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
 	__flush_tlb_all();
 }
 
-void __init efi_runtime_mkexec(void)
+void __init efi_runtime_update_mappings(void)
 {
 	if (__supported_pte_mask & _PAGE_NX)
 		runtime_code_page_mkexec();
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index a0ac0f9c307f..49e4dd4a1f58 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -15,6 +15,8 @@
  *
  */
 
+#define pr_fmt(fmt) "efi: " fmt
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -40,6 +42,7 @@
 #include <asm/fixmap.h>
 #include <asm/realmode.h>
 #include <asm/time.h>
+#include <asm/pgalloc.h>
 
 /*
  * We allocate runtime services regions bottom-up, starting from -4G, i.e.
@@ -47,16 +50,7 @@
  */
 static u64 efi_va = EFI_VA_START;
 
-/*
- * Scratch space used for switching the pagetable in the EFI stub
- */
-struct efi_scratch {
-	u64 r15;
-	u64 prev_cr3;
-	pgd_t *efi_pgt;
-	bool use_pgd;
-	u64 phys_stack;
-} __packed;
+struct efi_scratch efi_scratch;
 
 static void __init early_code_mapping_set_exec(int executable)
 {
@@ -83,8 +77,11 @@ pgd_t * __init efi_call_phys_prolog(void)
 	int pgd;
 	int n_pgds;
 
-	if (!efi_enabled(EFI_OLD_MEMMAP))
-		return NULL;
+	if (!efi_enabled(EFI_OLD_MEMMAP)) {
+		save_pgd = (pgd_t *)read_cr3();
+		write_cr3((unsigned long)efi_scratch.efi_pgt);
+		goto out;
+	}
 
 	early_code_mapping_set_exec(1);
 
@@ -96,6 +93,7 @@ pgd_t * __init efi_call_phys_prolog(void)
 		vaddress = (unsigned long)__va(pgd * PGDIR_SIZE);
 		set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress));
 	}
+out:
 	__flush_tlb_all();
 
 	return save_pgd;
@@ -109,8 +107,11 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
 	int pgd_idx;
 	int nr_pgds;
 
-	if (!save_pgd)
+	if (!efi_enabled(EFI_OLD_MEMMAP)) {
+		write_cr3((unsigned long)save_pgd);
+		__flush_tlb_all();
 		return;
+	}
 
 	nr_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
 
@@ -123,27 +124,98 @@ void __init efi_call_phys_epilog(pgd_t *save_pgd)
 	early_code_mapping_set_exec(0);
 }
 
+static pgd_t *efi_pgd;
+
+/*
+ * We need our own copy of the higher levels of the page tables
+ * because we want to avoid inserting EFI region mappings (EFI_VA_END
+ * to EFI_VA_START) into the standard kernel page tables. Everything
+ * else can be shared, see efi_sync_low_kernel_mappings().
+ */
+int __init efi_alloc_page_tables(void)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	gfp_t gfp_mask;
+
+	if (efi_enabled(EFI_OLD_MEMMAP))
+		return 0;
+
+	gfp_mask = GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO;
+	efi_pgd = (pgd_t *)__get_free_page(gfp_mask);
+	if (!efi_pgd)
+		return -ENOMEM;
+
+	pgd = efi_pgd + pgd_index(EFI_VA_END);
+
+	pud = pud_alloc_one(NULL, 0);
+	if (!pud) {
+		free_page((unsigned long)efi_pgd);
+		return -ENOMEM;
+	}
+
+	pgd_populate(NULL, pgd, pud);
+
+	return 0;
+}
+
 /*
  * Add low kernel mappings for passing arguments to EFI functions.
  */
 void efi_sync_low_kernel_mappings(void)
 {
-	unsigned num_pgds;
-	pgd_t *pgd = (pgd_t *)__va(real_mode_header->trampoline_pgd);
+	unsigned num_entries;
+	pgd_t *pgd_k, *pgd_efi;
+	pud_t *pud_k, *pud_efi;
 
 	if (efi_enabled(EFI_OLD_MEMMAP))
 		return;
 
-	num_pgds = pgd_index(MODULES_END - 1) - pgd_index(PAGE_OFFSET);
+	/*
+	 * We can share all PGD entries apart from the one entry that
+	 * covers the EFI runtime mapping space.
+	 *
+	 * Make sure the EFI runtime region mappings are guaranteed to
+	 * only span a single PGD entry and that the entry also maps
+	 * other important kernel regions.
+	 */
+	BUILD_BUG_ON(pgd_index(EFI_VA_END) != pgd_index(MODULES_END));
+	BUILD_BUG_ON((EFI_VA_START & PGDIR_MASK) !=
+			(EFI_VA_END & PGDIR_MASK));
+
+	pgd_efi = efi_pgd + pgd_index(PAGE_OFFSET);
+	pgd_k = pgd_offset_k(PAGE_OFFSET);
 
-	memcpy(pgd + pgd_index(PAGE_OFFSET),
-		init_mm.pgd + pgd_index(PAGE_OFFSET),
-		sizeof(pgd_t) * num_pgds);
+	num_entries = pgd_index(EFI_VA_END) - pgd_index(PAGE_OFFSET);
+	memcpy(pgd_efi, pgd_k, sizeof(pgd_t) * num_entries);
+
+	/*
+	 * We share all the PUD entries apart from those that map the
+	 * EFI regions. Copy around them.
+	 */
+	BUILD_BUG_ON((EFI_VA_START & ~PUD_MASK) != 0);
+	BUILD_BUG_ON((EFI_VA_END & ~PUD_MASK) != 0);
+
+	pgd_efi = efi_pgd + pgd_index(EFI_VA_END);
+	pud_efi = pud_offset(pgd_efi, 0);
+
+	pgd_k = pgd_offset_k(EFI_VA_END);
+	pud_k = pud_offset(pgd_k, 0);
+
+	num_entries = pud_index(EFI_VA_END);
+	memcpy(pud_efi, pud_k, sizeof(pud_t) * num_entries);
+
+	pud_efi = pud_offset(pgd_efi, EFI_VA_START);
+	pud_k = pud_offset(pgd_k, EFI_VA_START);
+
+	num_entries = PTRS_PER_PUD - pud_index(EFI_VA_START);
+	memcpy(pud_efi, pud_k, sizeof(pud_t) * num_entries);
 }
 
 int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 {
-	unsigned long text;
+	unsigned long pfn, text;
+	efi_memory_desc_t *md;
 	struct page *page;
 	unsigned npages;
 	pgd_t *pgd;
@@ -151,8 +223,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	if (efi_enabled(EFI_OLD_MEMMAP))
 		return 0;
 
-	efi_scratch.efi_pgt = (pgd_t *)(unsigned long)real_mode_header->trampoline_pgd;
-	pgd = __va(efi_scratch.efi_pgt);
+	efi_scratch.efi_pgt = (pgd_t *)__pa(efi_pgd);
+	pgd = efi_pgd;
 
 	/*
 	 * It can happen that the physical address of new_memmap lands in memory
@@ -160,7 +232,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	 * and ident-map those pages containing the map before calling
 	 * phys_efi_set_virtual_address_map().
 	 */
-	if (kernel_map_pages_in_pgd(pgd, pa_memmap, pa_memmap, num_pages, _PAGE_NX)) {
+	pfn = pa_memmap >> PAGE_SHIFT;
+	if (kernel_map_pages_in_pgd(pgd, pfn, pa_memmap, num_pages, _PAGE_NX | _PAGE_RW)) {
 		pr_err("Error ident-mapping new memmap (0x%lx)!\n", pa_memmap);
 		return 1;
 	}
@@ -176,6 +249,25 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	if (!IS_ENABLED(CONFIG_EFI_MIXED))
 		return 0;
 
+	/*
+	 * Map all of RAM so that we can access arguments in the 1:1
+	 * mapping when making EFI runtime calls.
+	 */
+	for_each_efi_memory_desc(&memmap, md) {
+		if (md->type != EFI_CONVENTIONAL_MEMORY &&
+		    md->type != EFI_LOADER_DATA &&
+		    md->type != EFI_LOADER_CODE)
+			continue;
+
+		pfn = md->phys_addr >> PAGE_SHIFT;
+		npages = md->num_pages;
+
+		if (kernel_map_pages_in_pgd(pgd, pfn, md->phys_addr, npages, _PAGE_RW)) {
+			pr_err("Failed to map 1:1 memory\n");
+			return 1;
+		}
+	}
+
 	page = alloc_page(GFP_KERNEL|__GFP_DMA32);
 	if (!page)
 		panic("Unable to allocate EFI runtime stack < 4GB\n");
@@ -183,10 +275,11 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	efi_scratch.phys_stack = virt_to_phys(page_address(page));
 	efi_scratch.phys_stack += PAGE_SIZE; /* stack grows down */
 
-	npages = (_end - _text) >> PAGE_SHIFT;
+	npages = (_etext - _text) >> PAGE_SHIFT;
 	text = __pa(_text);
+	pfn = text >> PAGE_SHIFT;
 
-	if (kernel_map_pages_in_pgd(pgd, text >> PAGE_SHIFT, text, npages, 0)) {
+	if (kernel_map_pages_in_pgd(pgd, pfn, text, npages, _PAGE_RW)) {
 		pr_err("Failed to map kernel text 1:1\n");
 		return 1;
 	}
@@ -196,20 +289,20 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 
 void __init efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 {
-	pgd_t *pgd = (pgd_t *)__va(real_mode_header->trampoline_pgd);
-
-	kernel_unmap_pages_in_pgd(pgd, pa_memmap, num_pages);
+	kernel_unmap_pages_in_pgd(efi_pgd, pa_memmap, num_pages);
 }
 
 static void __init __map_region(efi_memory_desc_t *md, u64 va)
 {
-	pgd_t *pgd = (pgd_t *)__va(real_mode_header->trampoline_pgd);
-	unsigned long pf = 0;
+	unsigned long flags = _PAGE_RW;
+	unsigned long pfn;
+	pgd_t *pgd = efi_pgd;
 
 	if (!(md->attribute & EFI_MEMORY_WB))
-		pf |= _PAGE_PCD;
+		flags |= _PAGE_PCD;
 
-	if (kernel_map_pages_in_pgd(pgd, md->phys_addr, va, md->num_pages, pf))
+	pfn = md->phys_addr >> PAGE_SHIFT;
+	if (kernel_map_pages_in_pgd(pgd, pfn, va, md->num_pages, flags))
 		pr_warn("Error mapping PA 0x%llx -> VA 0x%llx!\n",
 			   md->phys_addr, va);
 }
@@ -300,21 +393,56 @@ void __init parse_efi_setup(u64 phys_addr, u32 data_len)
 	efi_setup = phys_addr + sizeof(struct setup_data);
 }
 
-void __init efi_runtime_mkexec(void)
+void __init efi_runtime_update_mappings(void)
 {
-	if (!efi_enabled(EFI_OLD_MEMMAP))
+	unsigned long pfn;
+	pgd_t *pgd = efi_pgd;
+	efi_memory_desc_t *md;
+	void *p;
+
+	if (efi_enabled(EFI_OLD_MEMMAP)) {
+		if (__supported_pte_mask & _PAGE_NX)
+			runtime_code_page_mkexec();
 		return;
+	}
+
+	if (!efi_enabled(EFI_NX_PE_DATA))
+		return;
+
+	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
+		unsigned long pf = 0;
+		md = p;
+
+		if (!(md->attribute & EFI_MEMORY_RUNTIME))
+			continue;
 
-	if (__supported_pte_mask & _PAGE_NX)
-		runtime_code_page_mkexec();
+		if (!(md->attribute & EFI_MEMORY_WB))
+			pf |= _PAGE_PCD;
+
+		if ((md->attribute & EFI_MEMORY_XP) ||
+			(md->type == EFI_RUNTIME_SERVICES_DATA))
+			pf |= _PAGE_NX;
+
+		if (!(md->attribute & EFI_MEMORY_RO) &&
+			(md->type != EFI_RUNTIME_SERVICES_CODE))
+			pf |= _PAGE_RW;
+
+		/* Update the 1:1 mapping */
+		pfn = md->phys_addr >> PAGE_SHIFT;
+		if (kernel_map_pages_in_pgd(pgd, pfn, md->phys_addr, md->num_pages, pf))
+			pr_warn("Error mapping PA 0x%llx -> VA 0x%llx!\n",
+				   md->phys_addr, md->virt_addr);
+
+		if (kernel_map_pages_in_pgd(pgd, pfn, md->virt_addr, md->num_pages, pf))
+			pr_warn("Error mapping PA 0x%llx -> VA 0x%llx!\n",
+				   md->phys_addr, md->virt_addr);
+	}
 }
 
 void __init efi_dump_pagetable(void)
 {
 #ifdef CONFIG_EFI_PGT_DUMP
-	pgd_t *pgd = (pgd_t *)__va(real_mode_header->trampoline_pgd);
-
-	ptdump_walk_pgd_level(NULL, pgd);
+	ptdump_walk_pgd_level(NULL, efi_pgd);
 #endif
 }
 
diff --git a/arch/x86/platform/efi/efi_stub_64.S b/arch/x86/platform/efi/efi_stub_64.S
index 86d0f9e08dd9..92723aeae0f9 100644
--- a/arch/x86/platform/efi/efi_stub_64.S
+++ b/arch/x86/platform/efi/efi_stub_64.S
@@ -11,6 +11,7 @@
 #include <asm/msr.h>
 #include <asm/processor-flags.h>
 #include <asm/page_types.h>
+#include <asm/frame.h>
 
 #define SAVE_XMM			\
 	mov %rsp, %rax;			\
@@ -38,42 +39,8 @@
 	mov %rsi, %cr0;			\
 	mov (%rsp), %rsp
 
-	/* stolen from gcc */
-	.macro FLUSH_TLB_ALL
-	movq %r15, efi_scratch(%rip)
-	movq %r14, efi_scratch+8(%rip)
-	movq %cr4, %r15
-	movq %r15, %r14
-	andb $0x7f, %r14b
-	movq %r14, %cr4
-	movq %r15, %cr4
-	movq efi_scratch+8(%rip), %r14
-	movq efi_scratch(%rip), %r15
-	.endm
-
-	.macro SWITCH_PGT
-	cmpb $0, efi_scratch+24(%rip)
-	je 1f
-	movq %r15, efi_scratch(%rip)		# r15
-	# save previous CR3
-	movq %cr3, %r15
-	movq %r15, efi_scratch+8(%rip)		# prev_cr3
-	movq efi_scratch+16(%rip), %r15		# EFI pgt
-	movq %r15, %cr3
-	1:
-	.endm
-
-	.macro RESTORE_PGT
-	cmpb $0, efi_scratch+24(%rip)
-	je 2f
-	movq efi_scratch+8(%rip), %r15
-	movq %r15, %cr3
-	movq efi_scratch(%rip), %r15
-	FLUSH_TLB_ALL
-	2:
-	.endm
-
 ENTRY(efi_call)
+	FRAME_BEGIN
 	SAVE_XMM
 	mov (%rsp), %rax
 	mov 8(%rax), %rax
@@ -83,16 +50,9 @@ ENTRY(efi_call)
 	mov %r8, %r9
 	mov %rcx, %r8
 	mov %rsi, %rcx
-	SWITCH_PGT
 	call *%rdi
-	RESTORE_PGT
 	addq $48, %rsp
 	RESTORE_XMM
+	FRAME_END
 	ret
 ENDPROC(efi_call)
-
-	.data
-ENTRY(efi_scratch)
-	.fill 3,8,0
-	.byte 0
-	.quad 0
diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index 1c7380da65ff..ab50ada1d56e 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) "efi: " fmt
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -8,6 +10,7 @@
 #include <linux/memblock.h>
 #include <linux/bootmem.h>
 #include <linux/acpi.h>
+#include <linux/dmi.h>
 #include <asm/efi.h>
 #include <asm/uv/uv.h>
 
@@ -54,13 +57,41 @@ void efi_delete_dummy_variable(void)
 }
 
 /*
+ * In the nonblocking case we do not attempt to perform garbage
+ * collection if we do not have enough free space. Rather, we do the
+ * bare minimum check and give up immediately if the available space
+ * is below EFI_MIN_RESERVE.
+ *
+ * This function is intended to be small and simple because it is
+ * invoked from crash handler paths.
+ */
+static efi_status_t
+query_variable_store_nonblocking(u32 attributes, unsigned long size)
+{
+	efi_status_t status;
+	u64 storage_size, remaining_size, max_size;
+
+	status = efi.query_variable_info_nonblocking(attributes, &storage_size,
+						     &remaining_size,
+						     &max_size);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	if (remaining_size - size < EFI_MIN_RESERVE)
+		return EFI_OUT_OF_RESOURCES;
+
+	return EFI_SUCCESS;
+}
+
+/*
  * Some firmware implementations refuse to boot if there's insufficient space
  * in the variable store. Ensure that we never use more than a safe limit.
  *
  * Return EFI_SUCCESS if it is safe to write 'size' bytes to the variable
  * store.
  */
-efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
+efi_status_t efi_query_variable_store(u32 attributes, unsigned long size,
+				      bool nonblocking)
 {
 	efi_status_t status;
 	u64 storage_size, remaining_size, max_size;
@@ -68,6 +99,9 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
 	if (!(attributes & EFI_VARIABLE_NON_VOLATILE))
 		return 0;
 
+	if (nonblocking)
+		return query_variable_store_nonblocking(attributes, size);
+
 	status = efi.query_variable_info(attributes, &storage_size,
 					 &remaining_size, &max_size);
 	if (status != EFI_SUCCESS)
@@ -130,6 +164,27 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
 EXPORT_SYMBOL_GPL(efi_query_variable_store);
 
 /*
+ * Helper function for efi_reserve_boot_services() to figure out if we
+ * can free regions in efi_free_boot_services().
+ *
+ * Use this function to ensure we do not free regions owned by somebody
+ * else. We must only reserve (and then free) regions:
+ *
+ * - Not within any part of the kernel
+ * - Not the BIOS reserved area (E820_RESERVED, E820_NVS, etc)
+ */
+static bool can_free_region(u64 start, u64 size)
+{
+	if (start + size > __pa_symbol(_text) && start <= __pa_symbol(_end))
+		return false;
+
+	if (!e820_all_mapped(start, start+size, E820_RAM))
+		return false;
+
+	return true;
+}
+
+/*
  * The UEFI specification makes it clear that the operating system is free to do
  * whatever it wants with boot services code after ExitBootServices() has been
  * called. Ignoring this recommendation a significant bunch of EFI implementations 
@@ -146,26 +201,50 @@ void __init efi_reserve_boot_services(void)
 		efi_memory_desc_t *md = p;
 		u64 start = md->phys_addr;
 		u64 size = md->num_pages << EFI_PAGE_SHIFT;
+		bool already_reserved;
 
 		if (md->type != EFI_BOOT_SERVICES_CODE &&
 		    md->type != EFI_BOOT_SERVICES_DATA)
 			continue;
-		/* Only reserve where possible:
-		 * - Not within any already allocated areas
-		 * - Not over any memory area (really needed, if above?)
-		 * - Not within any part of the kernel
-		 * - Not the bios reserved area
-		*/
-		if ((start + size > __pa_symbol(_text)
-				&& start <= __pa_symbol(_end)) ||
-			!e820_all_mapped(start, start+size, E820_RAM) ||
-			memblock_is_region_reserved(start, size)) {
-			/* Could not reserve, skip it */
-			md->num_pages = 0;
-			memblock_dbg("Could not reserve boot range [0x%010llx-0x%010llx]\n",
-				     start, start+size-1);
-		} else
+
+		already_reserved = memblock_is_region_reserved(start, size);
+
+		/*
+		 * Because the following memblock_reserve() is paired
+		 * with free_bootmem_late() for this region in
+		 * efi_free_boot_services(), we must be extremely
+		 * careful not to reserve, and subsequently free,
+		 * critical regions of memory (like the kernel image) or
+		 * those regions that somebody else has already
+		 * reserved.
+		 *
+		 * A good example of a critical region that must not be
+		 * freed is page zero (first 4Kb of memory), which may
+		 * contain boot services code/data but is marked
+		 * E820_RESERVED by trim_bios_range().
+		 */
+		if (!already_reserved) {
 			memblock_reserve(start, size);
+
+			/*
+			 * If we are the first to reserve the region, no
+			 * one else cares about it. We own it and can
+			 * free it later.
+			 */
+			if (can_free_region(start, size))
+				continue;
+		}
+
+		/*
+		 * We don't own the region. We must not free it.
+		 *
+		 * Setting this bit for a boot services region really
+		 * doesn't make sense as far as the firmware is
+		 * concerned, but it does provide us with a way to tag
+		 * those regions that must not be paired with
+		 * free_bootmem_late().
+		 */
+		md->attribute |= EFI_MEMORY_RUNTIME;
 	}
 }
 
@@ -182,8 +261,8 @@ void __init efi_free_boot_services(void)
 		    md->type != EFI_BOOT_SERVICES_DATA)
 			continue;
 
-		/* Could not reserve boot area */
-		if (!size)
+		/* Do not free, someone else owns it: */
+		if (md->attribute & EFI_MEMORY_RUNTIME)
 			continue;
 
 		free_bootmem_late(start, size);
@@ -248,6 +327,16 @@ out:
 	return ret;
 }
 
+static const struct dmi_system_id sgi_uv1_dmi[] = {
+	{ NULL, "SGI UV1",
+		{	DMI_MATCH(DMI_PRODUCT_NAME,	"Stoutland Platform"),
+			DMI_MATCH(DMI_PRODUCT_VERSION,	"1.0"),
+			DMI_MATCH(DMI_BIOS_VENDOR,	"SGI.COM"),
+		}
+	},
+	{ } /* NULL entry stops DMI scanning */
+};
+
 void __init efi_apply_memmap_quirks(void)
 {
 	/*
@@ -256,14 +345,12 @@ void __init efi_apply_memmap_quirks(void)
 	 * services.
 	 */
 	if (!efi_runtime_supported()) {
-		pr_info("efi: Setup done, disabling due to 32/64-bit mismatch\n");
+		pr_info("Setup done, disabling due to 32/64-bit mismatch\n");
 		efi_unmap_memmap();
 	}
 
-	/*
-	 * UV doesn't support the new EFI pagetable mapping yet.
-	 */
-	if (is_uv_system())
+	/* UV2+ BIOS has a fix for this issue.  UV1 still needs the quirk. */
+	if (dmi_check_system(sgi_uv1_dmi))
 		set_bit(EFI_OLD_MEMMAP, &efi.flags);
 }
 
diff --git a/arch/x86/platform/geode/alix.c b/arch/x86/platform/geode/alix.c
index 76b6632d3143..1865c196f136 100644
--- a/arch/x86/platform/geode/alix.c
+++ b/arch/x86/platform/geode/alix.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/string.h>
-#include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
@@ -35,6 +35,11 @@
 #define BIOS_SIGNATURE_COREBOOT		0x500
 #define BIOS_REGION_SIZE		0x10000
 
+/*
+ * This driver is not modular, but to keep back compatibility
+ * with existing use cases, continuing with module_param is
+ * the easiest way forward.
+ */
 static bool force = 0;
 module_param(force, bool, 0444);
 /* FIXME: Award bios is not automatically detected as Alix platform */
@@ -192,9 +197,4 @@ static int __init alix_init(void)
 
 	return 0;
 }
-
-module_init(alix_init);
-
-MODULE_AUTHOR("Ed Wildgoose <kernel@wildgooses.com>");
-MODULE_DESCRIPTION("PCEngines ALIX System Setup");
-MODULE_LICENSE("GPL");
+device_initcall(alix_init);
diff --git a/arch/x86/platform/geode/geos.c b/arch/x86/platform/geode/geos.c
index aa733fba2471..4fcdb91318a0 100644
--- a/arch/x86/platform/geode/geos.c
+++ b/arch/x86/platform/geode/geos.c
@@ -19,7 +19,6 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/string.h>
-#include <linux/module.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
@@ -120,9 +119,4 @@ static int __init geos_init(void)
 
 	return 0;
 }
-
-module_init(geos_init);
-
-MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
-MODULE_DESCRIPTION("Traverse Technologies Geos System Setup");
-MODULE_LICENSE("GPL");
+device_initcall(geos_init);
diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c
index 927e38c0089f..a2f6b982a729 100644
--- a/arch/x86/platform/geode/net5501.c
+++ b/arch/x86/platform/geode/net5501.c
@@ -20,7 +20,6 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/string.h>
-#include <linux/module.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
@@ -146,9 +145,4 @@ static int __init net5501_init(void)
 
 	return 0;
 }
-
-module_init(net5501_init);
-
-MODULE_AUTHOR("Philip Prindeville <philipp@redfish-solutions.com>");
-MODULE_DESCRIPTION("Soekris net5501 System Setup");
-MODULE_LICENSE("GPL");
+device_initcall(net5501_init);
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c
index 0ae7f2ae2296..c26cf393d35a 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c
@@ -1,5 +1,5 @@
 /*
- * platform_bma023.c: bma023 platform data initilization file
+ * platform_bma023.c: bma023 platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  *
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
index 69a783689d21..c259fb6c8f4f 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c
@@ -1,5 +1,5 @@
 /*
- * platform_emc1403.c: emc1403 platform data initilization file
+ * platform_emc1403.c: emc1403 platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
index dccae6b0413f..52534ec29765 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c
@@ -1,5 +1,5 @@
 /*
- * platform_gpio_keys.c: gpio_keys platform data initilization file
+ * platform_gpio_keys.c: gpio_keys platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
index 54226de7541a..a35cf912de43 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c
@@ -1,5 +1,5 @@
 /*
- * platform_lis331.c:  lis331 platform data initilization file
+ * platform_lis331.c:  lis331 platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
index 2c8acbc1e9ad..6e075afa7877 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c
@@ -1,5 +1,5 @@
 /*
- * platform_max7315.c: max7315 platform data initilization file
+ * platform_max7315.c: max7315 platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
index cfe9a47a1e87..ee22864bbc2f 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c
@@ -1,5 +1,5 @@
 /*
- * platform_mpu3050.c: mpu3050 platform data initilization file
+ * platform_mpu3050.c: mpu3050 platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.c b/arch/x86/platform/intel-mid/device_libs/platform_msic.c
index 9f4a775a69d6..e421106c11cf 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic.c
@@ -1,5 +1,5 @@
 /*
- * platform_msic.c: MSIC platform data initilization file
+ * platform_msic.c: MSIC platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
index 29629397d2b3..cb3490ecb341 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c
@@ -1,5 +1,5 @@
 /*
- * platform_msic_audio.c: MSIC audio platform data initilization file
+ * platform_msic_audio.c: MSIC audio platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
index f446c33df1a8..4f72193939a6 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c
@@ -1,5 +1,5 @@
 /*
- * platform_msic_battery.c: MSIC battery platform data initilization file
+ * platform_msic_battery.c: MSIC battery platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
index 2a4f7b1dd917..70de5b531ba0 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c
@@ -1,5 +1,5 @@
 /*
- * platform_msic_gpio.c: MSIC GPIO platform data initilization file
+ * platform_msic_gpio.c: MSIC GPIO platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
index 6497111ddb54..3d7c2011b6cf 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c
@@ -1,5 +1,5 @@
 /*
- * platform_msic_ocd.c: MSIC OCD platform data initilization file
+ * platform_msic_ocd.c: MSIC OCD platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
index 83a3459bc337..038f618fbc52 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c
@@ -1,5 +1,5 @@
 /*
- * platform_msic_power_btn.c: MSIC power btn platform data initilization file
+ * platform_msic_power_btn.c: MSIC power btn platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
index a351878b96bc..114a5755b1e4 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c
@@ -1,5 +1,5 @@
 /*
- * platform_msic_thermal.c: msic_thermal platform data initilization file
+ * platform_msic_thermal.c: msic_thermal platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
index 65c2a9a19db4..e30cb62e3300 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_pmic_gpio.c
@@ -1,5 +1,5 @@
 /*
- * platform_pmic_gpio.c: PMIC GPIO platform data initilization file
+ * platform_pmic_gpio.c: PMIC GPIO platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
index 740fc757050c..b1526b95fd43 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c
@@ -1,5 +1,5 @@
 /*
- * platform_tc35876x.c: tc35876x platform data initilization file
+ * platform_tc35876x.c: tc35876x platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
index 33be0b3be6e1..4f41372ce400 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c
@@ -1,5 +1,5 @@
 /*
- * platform_tca6416.c: tca6416 platform data initilization file
+ * platform_tca6416.c: tca6416 platform data initialization file
  *
  * (C) Copyright 2013 Intel Corporation
  * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c
index 1bbc21e2e4ae..90bb997ed0a2 100644
--- a/arch/x86/platform/intel-mid/intel-mid.c
+++ b/arch/x86/platform/intel-mid/intel-mid.c
@@ -138,7 +138,7 @@ static void intel_mid_arch_setup(void)
 		intel_mid_ops = get_intel_mid_ops[__intel_mid_cpu_chip]();
 	else {
 		intel_mid_ops = get_intel_mid_ops[INTEL_MID_CPU_CHIP_PENWELL]();
-		pr_info("ARCH: Unknown SoC, assuming PENWELL!\n");
+		pr_info("ARCH: Unknown SoC, assuming Penwell!\n");
 	}
 
 out:
@@ -214,12 +214,10 @@ static inline int __init setup_x86_intel_mid_timer(char *arg)
 	else if (strcmp("lapic_and_apbt", arg) == 0)
 		intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT;
 	else {
-		pr_warn("X86 INTEL_MID timer option %s not recognised"
-			   " use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n",
-			   arg);
+		pr_warn("X86 INTEL_MID timer option %s not recognised use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n",
+			arg);
 		return -EINVAL;
 	}
 	return 0;
 }
 __setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer);
-
diff --git a/arch/x86/platform/intel-mid/mfld.c b/arch/x86/platform/intel-mid/mfld.c
index 23381d2174ae..1eb47b6298c2 100644
--- a/arch/x86/platform/intel-mid/mfld.c
+++ b/arch/x86/platform/intel-mid/mfld.c
@@ -52,10 +52,7 @@ static unsigned long __init mfld_calibrate_tsc(void)
 	/* mark tsc clocksource as reliable */
 	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
 
-	if (fast_calibrate)
-		return fast_calibrate;
-
-	return 0;
+	return fast_calibrate;
 }
 
 static void __init penwell_arch_setup(void)
diff --git a/arch/x86/platform/intel-mid/mrfl.c b/arch/x86/platform/intel-mid/mrfl.c
index aaca91753d32..bd1adc621781 100644
--- a/arch/x86/platform/intel-mid/mrfl.c
+++ b/arch/x86/platform/intel-mid/mrfl.c
@@ -81,10 +81,7 @@ static unsigned long __init tangier_calibrate_tsc(void)
 	/* mark tsc clocksource as reliable */
 	set_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC_RELIABLE);
 
-	if (fast_calibrate)
-		return fast_calibrate;
-
-	return 0;
+	return fast_calibrate;
 }
 
 static void __init tangier_arch_setup(void)
diff --git a/arch/x86/platform/intel-quark/imr.c b/arch/x86/platform/intel-quark/imr.c
index 0ee619f9fcb7..17d6d2296e4d 100644
--- a/arch/x86/platform/intel-quark/imr.c
+++ b/arch/x86/platform/intel-quark/imr.c
@@ -1,5 +1,5 @@
 /**
- * imr.c
+ * imr.c -- Intel Isolated Memory Region driver
  *
  * Copyright(c) 2013 Intel Corporation.
  * Copyright(c) 2015 Bryan O'Donoghue <pure.logic@nexus-software.ie>
@@ -31,7 +31,6 @@
 #include <linux/debugfs.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/types.h>
 
 struct imr_device {
@@ -111,23 +110,19 @@ static int imr_read(struct imr_device *idev, u32 imr_id, struct imr_regs *imr)
 	u32 reg = imr_id * IMR_NUM_REGS + idev->reg_base;
 	int ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->addr_lo);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->addr_lo);
 	if (ret)
 		return ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->addr_hi);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->addr_hi);
 	if (ret)
 		return ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->rmask);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->rmask);
 	if (ret)
 		return ret;
 
-	return iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->wmask);
+	return iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->wmask);
 }
 
 /**
@@ -139,11 +134,9 @@ static int imr_read(struct imr_device *idev, u32 imr_id, struct imr_regs *imr)
  * @idev:	pointer to imr_device structure.
  * @imr_id:	IMR entry to write.
  * @imr:	IMR structure representing address and access masks.
- * @lock:	indicates if the IMR lock bit should be applied.
  * @return:	0 on success or error code passed from mbi_iosf on failure.
  */
-static int imr_write(struct imr_device *idev, u32 imr_id,
-		     struct imr_regs *imr, bool lock)
+static int imr_write(struct imr_device *idev, u32 imr_id, struct imr_regs *imr)
 {
 	unsigned long flags;
 	u32 reg = imr_id * IMR_NUM_REGS + idev->reg_base;
@@ -151,35 +144,22 @@ static int imr_write(struct imr_device *idev, u32 imr_id,
 
 	local_irq_save(flags);
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE, reg++,
-				imr->addr_lo);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->addr_lo);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->addr_hi);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->addr_hi);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->rmask);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->rmask);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->wmask);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->wmask);
 	if (ret)
 		goto failed;
 
-	/* Lock bit must be set separately to addr_lo address bits. */
-	if (lock) {
-		imr->addr_lo |= IMR_LOCK;
-		ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-					reg - IMR_NUM_REGS, imr->addr_lo);
-		if (ret)
-			goto failed;
-	}
-
 	local_irq_restore(flags);
 	return 0;
 failed:
@@ -228,11 +208,12 @@ static int imr_dbgfs_state_show(struct seq_file *s, void *unused)
 		if (imr_is_enabled(&imr)) {
 			base = imr_to_phys(imr.addr_lo);
 			end = imr_to_phys(imr.addr_hi) + IMR_MASK;
+			size = end - base + 1;
 		} else {
 			base = 0;
 			end = 0;
+			size = 0;
 		}
-		size = end - base;
 		seq_printf(s, "imr%02i: base=%pa, end=%pa, size=0x%08zx "
 			   "rmask=0x%08x, wmask=0x%08x, %s, %s\n", i,
 			   &base, &end, size, imr.rmask, imr.wmask,
@@ -277,17 +258,6 @@ static int imr_debugfs_register(struct imr_device *idev)
 }
 
 /**
- * imr_debugfs_unregister - unregister debugfs hooks.
- *
- * @idev:	pointer to imr_device structure.
- * @return:
- */
-static void imr_debugfs_unregister(struct imr_device *idev)
-{
-	debugfs_remove(idev->file);
-}
-
-/**
  * imr_check_params - check passed address range IMR alignment and non-zero size
  *
  * @base:	base address of intended IMR.
@@ -341,11 +311,10 @@ static inline int imr_address_overlap(phys_addr_t addr, struct imr_regs *imr)
  * @size:	physical size of region in bytes must be aligned to 1KiB.
  * @read_mask:	read access mask.
  * @write_mask:	write access mask.
- * @lock:	indicates whether or not to permanently lock this region.
  * @return:	zero on success or negative value indicating error.
  */
 int imr_add_range(phys_addr_t base, size_t size,
-		  unsigned int rmask, unsigned int wmask, bool lock)
+		  unsigned int rmask, unsigned int wmask)
 {
 	phys_addr_t end;
 	unsigned int i;
@@ -418,7 +387,7 @@ int imr_add_range(phys_addr_t base, size_t size,
 	imr.rmask = rmask;
 	imr.wmask = wmask;
 
-	ret = imr_write(idev, reg, &imr, lock);
+	ret = imr_write(idev, reg, &imr);
 	if (ret < 0) {
 		/*
 		 * In the highly unlikely event iosf_mbi_write failed
@@ -429,7 +398,7 @@ int imr_add_range(phys_addr_t base, size_t size,
 		imr.addr_hi = 0;
 		imr.rmask = IMR_READ_ACCESS_ALL;
 		imr.wmask = IMR_WRITE_ACCESS_ALL;
-		imr_write(idev, reg, &imr, false);
+		imr_write(idev, reg, &imr);
 	}
 failed:
 	mutex_unlock(&idev->lock);
@@ -525,7 +494,7 @@ static int __imr_remove_range(int reg, phys_addr_t base, size_t size)
 	imr.rmask = IMR_READ_ACCESS_ALL;
 	imr.wmask = IMR_WRITE_ACCESS_ALL;
 
-	ret = imr_write(idev, reg, &imr, false);
+	ret = imr_write(idev, reg, &imr);
 
 failed:
 	mutex_unlock(&idev->lock);
@@ -587,6 +556,7 @@ static void __init imr_fixup_memmap(struct imr_device *idev)
 {
 	phys_addr_t base = virt_to_phys(&_text);
 	size_t size = virt_to_phys(&__end_rodata) - base;
+	unsigned long start, end;
 	int i;
 	int ret;
 
@@ -594,18 +564,24 @@ static void __init imr_fixup_memmap(struct imr_device *idev)
 	for (i = 0; i < idev->max_imr; i++)
 		imr_clear(i);
 
+	start = (unsigned long)_text;
+	end = (unsigned long)__end_rodata - 1;
+
 	/*
-	 * Setup a locked IMR around the physical extent of the kernel
+	 * Setup an unlocked IMR around the physical extent of the kernel
 	 * from the beginning of the .text secton to the end of the
 	 * .rodata section as one physically contiguous block.
+	 *
+	 * We don't round up @size since it is already PAGE_SIZE aligned.
+	 * See vmlinux.lds.S for details.
 	 */
-	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU, true);
+	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU);
 	if (ret < 0) {
-		pr_err("unable to setup IMR for kernel: (%p - %p)\n",
-			&_text, &__end_rodata);
+		pr_err("unable to setup IMR for kernel: %zu KiB (%lx - %lx)\n",
+			size / 1024, start, end);
 	} else {
-		pr_info("protecting kernel .text - .rodata: %zu KiB (%p - %p)\n",
-			size / 1024, &_text, &__end_rodata);
+		pr_info("protecting kernel .text - .rodata: %zu KiB (%lx - %lx)\n",
+			size / 1024, start, end);
 	}
 
 }
@@ -614,7 +590,6 @@ static const struct x86_cpu_id imr_ids[] __initconst = {
 	{ X86_VENDOR_INTEL, 5, 9 },	/* Intel Quark SoC X1000. */
 	{}
 };
-MODULE_DEVICE_TABLE(x86cpu, imr_ids);
 
 /**
  * imr_init - entry point for IMR driver.
@@ -640,22 +615,4 @@ static int __init imr_init(void)
 	imr_fixup_memmap(idev);
 	return 0;
 }
-
-/**
- * imr_exit - exit point for IMR code.
- *
- * Deregisters debugfs, leave IMR state as-is.
- *
- * return:
- */
-static void __exit imr_exit(void)
-{
-	imr_debugfs_unregister(&imr_dev);
-}
-
-module_init(imr_init);
-module_exit(imr_exit);
-
-MODULE_AUTHOR("Bryan O'Donoghue <pure.logic@nexus-software.ie>");
-MODULE_DESCRIPTION("Intel Isolated Memory Region driver");
-MODULE_LICENSE("Dual BSD/GPL");
+device_initcall(imr_init);
diff --git a/arch/x86/platform/intel-quark/imr_selftest.c b/arch/x86/platform/intel-quark/imr_selftest.c
index 278e4da4222f..f5bad40936ac 100644
--- a/arch/x86/platform/intel-quark/imr_selftest.c
+++ b/arch/x86/platform/intel-quark/imr_selftest.c
@@ -1,5 +1,5 @@
 /**
- * imr_selftest.c
+ * imr_selftest.c -- Intel Isolated Memory Region self-test driver
  *
  * Copyright(c) 2013 Intel Corporation.
  * Copyright(c) 2015 Bryan O'Donoghue <pure.logic@nexus-software.ie>
@@ -15,7 +15,6 @@
 #include <asm/imr.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/module.h>
 #include <linux/types.h>
 
 #define SELFTEST KBUILD_MODNAME ": "
@@ -61,30 +60,30 @@ static void __init imr_self_test(void)
 	int ret;
 
 	/* Test zero zero. */
-	ret = imr_add_range(0, 0, 0, 0, false);
+	ret = imr_add_range(0, 0, 0, 0);
 	imr_self_test_result(ret < 0, "zero sized IMR\n");
 
 	/* Test exact overlap. */
-	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU, false);
+	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU);
 	imr_self_test_result(ret < 0, fmt_over, __va(base), __va(base + size));
 
 	/* Test overlap with base inside of existing. */
 	base += size - IMR_ALIGN;
-	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU, false);
+	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU);
 	imr_self_test_result(ret < 0, fmt_over, __va(base), __va(base + size));
 
 	/* Test overlap with end inside of existing. */
 	base -= size + IMR_ALIGN * 2;
-	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU, false);
+	ret = imr_add_range(base, size, IMR_CPU, IMR_CPU);
 	imr_self_test_result(ret < 0, fmt_over, __va(base), __va(base + size));
 
 	/* Test that a 1 KiB IMR @ zero with read/write all will bomb out. */
 	ret = imr_add_range(0, IMR_ALIGN, IMR_READ_ACCESS_ALL,
-			    IMR_WRITE_ACCESS_ALL, false);
+			    IMR_WRITE_ACCESS_ALL);
 	imr_self_test_result(ret < 0, "1KiB IMR @ 0x00000000 - access-all\n");
 
 	/* Test that a 1 KiB IMR @ zero with CPU only will work. */
-	ret = imr_add_range(0, IMR_ALIGN, IMR_CPU, IMR_CPU, false);
+	ret = imr_add_range(0, IMR_ALIGN, IMR_CPU, IMR_CPU);
 	imr_self_test_result(ret >= 0, "1KiB IMR @ 0x00000000 - cpu-access\n");
 	if (ret >= 0) {
 		ret = imr_remove_range(0, IMR_ALIGN);
@@ -93,8 +92,7 @@ static void __init imr_self_test(void)
 
 	/* Test 2 KiB works. */
 	size = IMR_ALIGN * 2;
-	ret = imr_add_range(0, size, IMR_READ_ACCESS_ALL,
-			    IMR_WRITE_ACCESS_ALL, false);
+	ret = imr_add_range(0, size, IMR_READ_ACCESS_ALL, IMR_WRITE_ACCESS_ALL);
 	imr_self_test_result(ret >= 0, "2KiB IMR @ 0x00000000\n");
 	if (ret >= 0) {
 		ret = imr_remove_range(0, size);
@@ -106,7 +104,6 @@ static const struct x86_cpu_id imr_ids[] __initconst = {
 	{ X86_VENDOR_INTEL, 5, 9 },	/* Intel Quark SoC X1000. */
 	{}
 };
-MODULE_DEVICE_TABLE(x86cpu, imr_ids);
 
 /**
  * imr_self_test_init - entry point for IMR driver.
@@ -125,13 +122,4 @@ static int __init imr_self_test_init(void)
  *
  * return:
  */
-static void __exit imr_self_test_exit(void)
-{
-}
-
-module_init(imr_self_test_init);
-module_exit(imr_self_test_exit);
-
-MODULE_AUTHOR("Bryan O'Donoghue <pure.logic@nexus-software.ie>");
-MODULE_DESCRIPTION("Intel Isolated Memory Region self-test driver");
-MODULE_LICENSE("Dual BSD/GPL");
+device_initcall(imr_self_test_init);
diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c
index 327f21c3bde1..8dd80050d705 100644
--- a/arch/x86/platform/uv/uv_nmi.c
+++ b/arch/x86/platform/uv/uv_nmi.c
@@ -28,6 +28,7 @@
 #include <linux/nmi.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/clocksource.h>
 
 #include <asm/apic.h>
 #include <asm/current.h>
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 9ab52791fed5..d5f64996394a 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -23,6 +23,7 @@
 #include <asm/debugreg.h>
 #include <asm/cpu.h>
 #include <asm/mmu_context.h>
+#include <linux/dmi.h>
 
 #ifdef CONFIG_X86_32
 __visible unsigned long saved_context_ebx;
@@ -32,6 +33,29 @@ __visible unsigned long saved_context_eflags;
 #endif
 struct saved_context saved_context;
 
+static void msr_save_context(struct saved_context *ctxt)
+{
+	struct saved_msr *msr = ctxt->saved_msrs.array;
+	struct saved_msr *end = msr + ctxt->saved_msrs.num;
+
+	while (msr < end) {
+		msr->valid = !rdmsrl_safe(msr->info.msr_no, &msr->info.reg.q);
+		msr++;
+	}
+}
+
+static void msr_restore_context(struct saved_context *ctxt)
+{
+	struct saved_msr *msr = ctxt->saved_msrs.array;
+	struct saved_msr *end = msr + ctxt->saved_msrs.num;
+
+	while (msr < end) {
+		if (msr->valid)
+			wrmsrl(msr->info.msr_no, msr->info.reg.q);
+		msr++;
+	}
+}
+
 /**
  *	__save_processor_state - save CPU registers before creating a
  *		hibernation image and before restoring the memory state from it
@@ -111,6 +135,7 @@ static void __save_processor_state(struct saved_context *ctxt)
 #endif
 	ctxt->misc_enable_saved = !rdmsrl_safe(MSR_IA32_MISC_ENABLE,
 					       &ctxt->misc_enable);
+	msr_save_context(ctxt);
 }
 
 /* Needed by apm.c */
@@ -229,6 +254,7 @@ static void notrace __restore_processor_state(struct saved_context *ctxt)
 	x86_platform.restore_sched_clock_state();
 	mtrr_bp_restore();
 	perf_restore_debug_store();
+	msr_restore_context(ctxt);
 }
 
 /* Needed by apm.c */
@@ -320,3 +346,69 @@ static int __init bsp_pm_check_init(void)
 }
 
 core_initcall(bsp_pm_check_init);
+
+static int msr_init_context(const u32 *msr_id, const int total_num)
+{
+	int i = 0;
+	struct saved_msr *msr_array;
+
+	if (saved_context.saved_msrs.array || saved_context.saved_msrs.num > 0) {
+		pr_err("x86/pm: MSR quirk already applied, please check your DMI match table.\n");
+		return -EINVAL;
+	}
+
+	msr_array = kmalloc_array(total_num, sizeof(struct saved_msr), GFP_KERNEL);
+	if (!msr_array) {
+		pr_err("x86/pm: Can not allocate memory to save/restore MSRs during suspend.\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < total_num; i++) {
+		msr_array[i].info.msr_no	= msr_id[i];
+		msr_array[i].valid		= false;
+		msr_array[i].info.reg.q		= 0;
+	}
+	saved_context.saved_msrs.num	= total_num;
+	saved_context.saved_msrs.array	= msr_array;
+
+	return 0;
+}
+
+/*
+ * The following section is a quirk framework for problematic BIOSen:
+ * Sometimes MSRs are modified by the BIOSen after suspended to
+ * RAM, this might cause unexpected behavior after wakeup.
+ * Thus we save/restore these specified MSRs across suspend/resume
+ * in order to work around it.
+ *
+ * For any further problematic BIOSen/platforms,
+ * please add your own function similar to msr_initialize_bdw.
+ */
+static int msr_initialize_bdw(const struct dmi_system_id *d)
+{
+	/* Add any extra MSR ids into this array. */
+	u32 bdw_msr_id[] = { MSR_IA32_THERM_CONTROL };
+
+	pr_info("x86/pm: %s detected, MSR saving is needed during suspending.\n", d->ident);
+	return msr_init_context(bdw_msr_id, ARRAY_SIZE(bdw_msr_id));
+}
+
+static struct dmi_system_id msr_save_dmi_table[] = {
+	{
+	 .callback = msr_initialize_bdw,
+	 .ident = "BROADWELL BDX_EP",
+	 .matches = {
+		DMI_MATCH(DMI_PRODUCT_NAME, "GRANTLEY"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "E63448-400"),
+		},
+	},
+	{}
+};
+
+static int pm_check_save_msr(void)
+{
+	dmi_check_system(msr_save_dmi_table);
+	return 0;
+}
+
+device_initcall(pm_check_save_msr);
diff --git a/arch/x86/power/hibernate_asm_64.S b/arch/x86/power/hibernate_asm_64.S
index e2386cb4e0c3..4400a43b9e28 100644
--- a/arch/x86/power/hibernate_asm_64.S
+++ b/arch/x86/power/hibernate_asm_64.S
@@ -21,8 +21,10 @@
 #include <asm/page_types.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor-flags.h>
+#include <asm/frame.h>
 
 ENTRY(swsusp_arch_suspend)
+	FRAME_BEGIN
 	movq	$saved_context, %rax
 	movq	%rsp, pt_regs_sp(%rax)
 	movq	%rbp, pt_regs_bp(%rax)
@@ -50,7 +52,9 @@ ENTRY(swsusp_arch_suspend)
 	movq	%rax, restore_cr3(%rip)
 
 	call swsusp_save
+	FRAME_END
 	ret
+ENDPROC(swsusp_arch_suspend)
 
 ENTRY(restore_image)
 	/* switch to temporary page tables */
@@ -107,6 +111,7 @@ ENTRY(core_restore_code)
 	 */
 
 ENTRY(restore_registers)
+	FRAME_BEGIN
 	/* go back to the original page tables */
 	movq    %rbx, %cr3
 
@@ -147,4 +152,6 @@ ENTRY(restore_registers)
 	/* tell the hibernation core that we've just restored the memory */
 	movq	%rax, in_suspend(%rip)
 
+	FRAME_END
 	ret
+ENDPROC(restore_registers)
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 2c835e356349..92e3e1d84c1d 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -1,3 +1,5 @@
+OBJECT_FILES_NON_STANDARD := y
+
 purgatory-y := purgatory.o stack.o setup-x86_$(BITS).o sha256.o entry64.o string.o
 
 targets += $(purgatory-y)
diff --git a/arch/x86/purgatory/stack.S b/arch/x86/purgatory/stack.S
index 3cefba1fefc8..50a4147f91fb 100644
--- a/arch/x86/purgatory/stack.S
+++ b/arch/x86/purgatory/stack.S
@@ -8,7 +8,7 @@
  */
 
 	/* A stack for the loaded kernel.
-	 * Seperate and in the data section so it can be prepopulated.
+	 * Separate and in the data section so it can be prepopulated.
 	 */
 	.data
 	.balign 4096
diff --git a/arch/x86/ras/mce_amd_inj.c b/arch/x86/ras/mce_amd_inj.c
index 55d38cfa46c2..9e02dcaef683 100644
--- a/arch/x86/ras/mce_amd_inj.c
+++ b/arch/x86/ras/mce_amd_inj.c
@@ -20,6 +20,7 @@
 #include <linux/pci.h>
 
 #include <asm/mce.h>
+#include <asm/smp.h>
 #include <asm/amd_nb.h>
 #include <asm/irq_vectors.h>
 
@@ -206,7 +207,7 @@ static u32 get_nbc_for_node(int node_id)
 	struct cpuinfo_x86 *c = &boot_cpu_data;
 	u32 cores_per_node;
 
-	cores_per_node = c->x86_max_cores / amd_get_nodes_per_socket();
+	cores_per_node = (c->x86_max_cores * smp_num_siblings) / amd_get_nodes_per_socket();
 
 	return cores_per_node * node_id;
 }
diff --git a/arch/x86/realmode/Makefile b/arch/x86/realmode/Makefile
index e02c2c6c56a5..682c895753d9 100644
--- a/arch/x86/realmode/Makefile
+++ b/arch/x86/realmode/Makefile
@@ -6,7 +6,9 @@
 # for more details.
 #
 #
-KASAN_SANITIZE := n
+KASAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+
 subdir- := rm
 
 obj-y += init.o
diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile
index 2730d775ef9a..b95964610ea7 100644
--- a/arch/x86/realmode/rm/Makefile
+++ b/arch/x86/realmode/rm/Makefile
@@ -6,7 +6,11 @@
 # for more details.
 #
 #
-KASAN_SANITIZE := n
+KASAN_SANITIZE			:= n
+OBJECT_FILES_NON_STANDARD	:= y
+
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT		:= n
 
 always := realmode.bin realmode.relocs
 
@@ -70,3 +74,4 @@ KBUILD_CFLAGS	:= $(LINUXINCLUDE) $(REALMODE_CFLAGS) -D_SETUP -D_WAKEUP \
 		   -I$(srctree)/arch/x86/boot
 KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
 GCOV_PROFILE := n
+UBSAN_SANITIZE := n
diff --git a/arch/x86/um/Makefile b/arch/x86/um/Makefile
index a8fecc226946..3ee2bb6b440b 100644
--- a/arch/x86/um/Makefile
+++ b/arch/x86/um/Makefile
@@ -17,7 +17,7 @@ obj-y = bug.o bugs_$(BITS).o delay.o fault.o ksyms.o ldt.o \
 ifeq ($(CONFIG_X86_32),y)
 
 obj-y += checksum_32.o
-obj-$(CONFIG_BINFMT_ELF) += elfcore.o
+obj-$(CONFIG_ELF_CORE) += elfcore.o
 
 subarch-y = ../lib/string_32.o ../lib/atomic64_32.o ../lib/atomic64_cx8_32.o
 subarch-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += ../lib/rwsem.o
diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h
index 755481f14d90..00c319048d52 100644
--- a/arch/x86/um/asm/barrier.h
+++ b/arch/x86/um/asm/barrier.h
@@ -3,7 +3,7 @@
 
 #include <asm/asm.h>
 #include <asm/segment.h>
-#include <asm/cpufeature.h>
+#include <asm/cpufeatures.h>
 #include <asm/cmpxchg.h>
 #include <asm/nops.h>
 
@@ -36,13 +36,6 @@
 #endif /* CONFIG_X86_PPRO_FENCE */
 #define dma_wmb()	barrier()
 
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-
-#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); barrier(); } while (0)
-
-#define read_barrier_depends()		do { } while (0)
-#define smp_read_barrier_depends()	do { } while (0)
+#include <asm-generic/barrier.h>
 
 #endif
diff --git a/arch/x86/um/asm/checksum.h b/arch/x86/um/asm/checksum.h
index ee940185e89f..54d96f1e3594 100644
--- a/arch/x86/um/asm/checksum.h
+++ b/arch/x86/um/asm/checksum.h
@@ -87,8 +87,8 @@ static inline __sum16 csum_fold(__wsum sum)
  * 32bit unfolded.
  */
 static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
-		   unsigned short proto, __wsum sum)
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
+		  __u8 proto, __wsum sum)
 {
 	asm("  addl %1, %0\n"
 	    "  adcl %2, %0\n"
@@ -104,9 +104,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
  * returns a 16-bit checksum, already complemented
  */
 static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-					   unsigned short len,
-					   unsigned short proto,
-					   __wsum sum)
+					__u32 len, __u8 proto,
+					__wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
diff --git a/arch/x86/um/asm/checksum_32.h b/arch/x86/um/asm/checksum_32.h
index ab77b6f9a4bf..83a75f8a1233 100644
--- a/arch/x86/um/asm/checksum_32.h
+++ b/arch/x86/um/asm/checksum_32.h
@@ -13,7 +13,7 @@ static inline __sum16 ip_compute_csum(const void *buff, int len)
 #define _HAVE_ARCH_IPV6_CSUM
 static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 					  const struct in6_addr *daddr,
-					  __u32 len, unsigned short proto,
+					  __u32 len, __u8 proto,
 					  __wsum sum)
 {
 	__asm__(
diff --git a/arch/x86/um/asm/syscall.h b/arch/x86/um/asm/syscall.h
index 81d6562ce01d..11ab90dc5f14 100644
--- a/arch/x86/um/asm/syscall.h
+++ b/arch/x86/um/asm/syscall.h
@@ -1,6 +1,7 @@
 #ifndef __UM_ASM_SYSCALL_H
 #define __UM_ASM_SYSCALL_H
 
+#include <asm/syscall-generic.h>
 #include <uapi/linux/audit.h>
 
 typedef asmlinkage long (*sys_call_ptr_t)(unsigned long, unsigned long,
diff --git a/arch/x86/um/os-Linux/task_size.c b/arch/x86/um/os-Linux/task_size.c
index 8502ad30e61b..5adb6a2fd117 100644
--- a/arch/x86/um/os-Linux/task_size.c
+++ b/arch/x86/um/os-Linux/task_size.c
@@ -109,7 +109,7 @@ unsigned long os_get_top_address(void)
 		exit(1);
 	}
 
-	printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
+	printf("0x%lx\n", bottom << UM_KERN_PAGE_SHIFT);
 	printf("Locating the top of the address space ... ");
 	fflush(stdout);
 
@@ -134,7 +134,7 @@ out:
 		exit(1);
 	}
 	top <<= UM_KERN_PAGE_SHIFT;
-	printf("0x%x\n", top);
+	printf("0x%lx\n", top);
 
 	return top;
 }
diff --git a/arch/x86/um/ptrace_32.c b/arch/x86/um/ptrace_32.c
index a29756f2d940..47c78d5e5c32 100644
--- a/arch/x86/um/ptrace_32.c
+++ b/arch/x86/um/ptrace_32.c
@@ -68,6 +68,7 @@ static const int reg_offsets[] = {
 	[EFL] = HOST_EFLAGS,
 	[UESP] = HOST_SP,
 	[SS] = HOST_SS,
+	[ORIG_EAX] = HOST_ORIG_AX,
 };
 
 int putreg(struct task_struct *child, int regno, unsigned long value)
@@ -83,6 +84,7 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 	case EAX:
 	case EIP:
 	case UESP:
+	case ORIG_EAX:
 		break;
 	case FS:
 		if (value && (value & 3) != 3)
@@ -108,9 +110,6 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 		value &= FLAG_MASK;
 		child->thread.regs.regs.gp[HOST_EFLAGS] |= value;
 		return 0;
-	case ORIG_EAX:
-		child->thread.regs.regs.syscall = value;
-		return 0;
 	default :
 		panic("Bad register in putreg() : %d\n", regno);
 	}
@@ -143,8 +142,6 @@ unsigned long getreg(struct task_struct *child, int regno)
 
 	regno >>= 2;
 	switch (regno) {
-	case ORIG_EAX:
-		return child->thread.regs.regs.syscall;
 	case FS:
 	case GS:
 	case DS:
@@ -163,6 +160,7 @@ unsigned long getreg(struct task_struct *child, int regno)
 	case EDI:
 	case EBP:
 	case EFL:
+	case ORIG_EAX:
 		break;
 	default:
 		panic("Bad register in getreg() : %d\n", regno);
diff --git a/arch/x86/um/signal.c b/arch/x86/um/signal.c
index 06934a8a4872..14fcd01ed992 100644
--- a/arch/x86/um/signal.c
+++ b/arch/x86/um/signal.c
@@ -211,7 +211,7 @@ static int copy_sc_from_user(struct pt_regs *regs,
 		if (err)
 			return 1;
 
-		err = convert_fxsr_from_user(&fpx, sc.fpstate);
+		err = convert_fxsr_from_user(&fpx, (void *)sc.fpstate);
 		if (err)
 			return 1;
 
@@ -227,7 +227,7 @@ static int copy_sc_from_user(struct pt_regs *regs,
 	{
 		struct user_i387_struct fp;
 
-		err = copy_from_user(&fp, sc.fpstate,
+		err = copy_from_user(&fp, (void *)sc.fpstate,
 				     sizeof(struct user_i387_struct));
 		if (err)
 			return 1;
@@ -291,7 +291,7 @@ static int copy_sc_to_user(struct sigcontext __user *to,
 #endif
 #undef PUTREG
 	sc.oldmask = mask;
-	sc.fpstate = to_fp;
+	sc.fpstate = (unsigned long)to_fp;
 
 	err = copy_to_user(to, &sc, sizeof(struct sigcontext));
 	if (err)
@@ -468,12 +468,10 @@ long sys_sigreturn(void)
 	struct sigframe __user *frame = (struct sigframe __user *)(sp - 8);
 	sigset_t set;
 	struct sigcontext __user *sc = &frame->sc;
-	unsigned long __user *oldmask = &sc->oldmask;
-	unsigned long __user *extramask = frame->extramask;
 	int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long);
 
-	if (copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) ||
-	    copy_from_user(&set.sig[1], extramask, sig_size))
+	if (copy_from_user(&set.sig[0], &sc->oldmask, sizeof(set.sig[0])) ||
+	    copy_from_user(&set.sig[1], frame->extramask, sig_size))
 		goto segfault;
 
 	set_current_blocked(&set);
@@ -505,6 +503,7 @@ int setup_signal_stack_si(unsigned long stack_top, struct ksignal *ksig,
 {
 	struct rt_sigframe __user *frame;
 	int err = 0, sig = ksig->sig;
+	unsigned long fp_to;
 
 	frame = (struct rt_sigframe __user *)
 		round_down(stack_top - sizeof(struct rt_sigframe), 16);
@@ -526,7 +525,10 @@ int setup_signal_stack_si(unsigned long stack_top, struct ksignal *ksig,
 	err |= __save_altstack(&frame->uc.uc_stack, PT_REGS_SP(regs));
 	err |= copy_sc_to_user(&frame->uc.uc_mcontext, &frame->fpstate, regs,
 			       set->sig[0]);
-	err |= __put_user(&frame->fpstate, &frame->uc.uc_mcontext.fpstate);
+
+	fp_to = (unsigned long)&frame->fpstate;
+
+	err |= __put_user(fp_to, &frame->uc.uc_mcontext.fpstate);
 	if (sizeof(*set) == 16) {
 		err |= __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
 		err |= __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
diff --git a/arch/x86/um/stub_32.S b/arch/x86/um/stub_32.S
index b972649d3a18..98816804e131 100644
--- a/arch/x86/um/stub_32.S
+++ b/arch/x86/um/stub_32.S
@@ -1,6 +1,5 @@
 #include <as-layout.h>
 
-	.globl syscall_stub
 .section .__syscall_stub, "ax"
 
 	.globl batch_syscall_stub
diff --git a/arch/x86/um/stub_64.S b/arch/x86/um/stub_64.S
index 7160b20172d0..ba914b3b8cc4 100644
--- a/arch/x86/um/stub_64.S
+++ b/arch/x86/um/stub_64.S
@@ -1,25 +1,9 @@
 #include <as-layout.h>
 
-	.globl syscall_stub
 .section .__syscall_stub, "ax"
-syscall_stub:
-	syscall
-	/* We don't have 64-bit constants, so this constructs the address
-	 * we need.
-	 */
-	movq	$(STUB_DATA >> 32), %rbx
-	salq	$32, %rbx
-	movq	$(STUB_DATA & 0xffffffff), %rcx
-	or	%rcx, %rbx
-	movq	%rax, (%rbx)
-	int3
-
 	.globl batch_syscall_stub
 batch_syscall_stub:
-	mov	$(STUB_DATA >> 32), %rbx
-	sal	$32, %rbx
-	mov	$(STUB_DATA & 0xffffffff), %rax
-	or	%rax, %rbx
+	mov	$(STUB_DATA), %rbx
 	/* load pointer to first operation */
 	mov	%rbx, %rsp
 	add	$0x10, %rsp
diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c
index 439c0994b696..bfce503dffae 100644
--- a/arch/x86/um/sys_call_table_32.c
+++ b/arch/x86/um/sys_call_table_32.c
@@ -25,11 +25,11 @@
 
 #define old_mmap sys_old_mmap
 
-#define __SYSCALL_I386(nr, sym, compat) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
+#define __SYSCALL_I386(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
 #include <asm/syscalls_32.h>
 
 #undef __SYSCALL_I386
-#define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym,
+#define __SYSCALL_I386(nr, sym, qual) [ nr ] = sym,
 
 extern asmlinkage long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
 
diff --git a/arch/x86/um/sys_call_table_64.c b/arch/x86/um/sys_call_table_64.c
index b74ea6c2c0e7..f306413d3eb6 100644
--- a/arch/x86/um/sys_call_table_64.c
+++ b/arch/x86/um/sys_call_table_64.c
@@ -35,14 +35,11 @@
 #define stub_execveat sys_execveat
 #define stub_rt_sigreturn sys_rt_sigreturn
 
-#define __SYSCALL_COMMON(nr, sym, compat) __SYSCALL_64(nr, sym, compat)
-#define __SYSCALL_X32(nr, sym, compat) /* Not supported */
-
-#define __SYSCALL_64(nr, sym, compat) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
+#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long sym(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) ;
 #include <asm/syscalls_64.h>
 
 #undef __SYSCALL_64
-#define __SYSCALL_64(nr, sym, compat) [ nr ] = sym,
+#define __SYSCALL_64(nr, sym, qual) [ nr ] = sym,
 
 extern asmlinkage long sys_ni_syscall(unsigned long, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long);
 
diff --git a/arch/x86/um/user-offsets.c b/arch/x86/um/user-offsets.c
index ce7e3607a870..470564bbd08e 100644
--- a/arch/x86/um/user-offsets.c
+++ b/arch/x86/um/user-offsets.c
@@ -9,14 +9,12 @@
 #include <asm/types.h>
 
 #ifdef __i386__
-#define __SYSCALL_I386(nr, sym, compat) [nr] = 1,
+#define __SYSCALL_I386(nr, sym, qual) [nr] = 1,
 static char syscalls[] = {
 #include <asm/syscalls_32.h>
 };
 #else
-#define __SYSCALL_64(nr, sym, compat) [nr] = 1,
-#define __SYSCALL_COMMON(nr, sym, compat) [nr] = 1,
-#define __SYSCALL_X32(nr, sym, compat) /* Not supported */
+#define __SYSCALL_64(nr, sym, qual) [nr] = 1,
 static char syscalls[] = {
 #include <asm/syscalls_64.h>
 };
diff --git a/arch/x86/video/fbdev.c b/arch/x86/video/fbdev.c
index d5644bbe8cba..9fd24846d094 100644
--- a/arch/x86/video/fbdev.c
+++ b/arch/x86/video/fbdev.c
@@ -14,26 +14,24 @@
 int fb_is_primary_device(struct fb_info *info)
 {
 	struct device *device = info->device;
-	struct pci_dev *pci_dev = NULL;
 	struct pci_dev *default_device = vga_default_device();
-	struct resource *res = NULL;
+	struct pci_dev *pci_dev;
+	struct resource *res;
 
-	if (device)
-		pci_dev = to_pci_dev(device);
-
-	if (!pci_dev)
+	if (!device || !dev_is_pci(device))
 		return 0;
 
+	pci_dev = to_pci_dev(device);
+
 	if (default_device) {
 		if (pci_dev == default_device)
 			return 1;
-		else
-			return 0;
+		return 0;
 	}
 
-	res = &pci_dev->resource[PCI_ROM_RESOURCE];
+	res = pci_dev->resource + PCI_ROM_RESOURCE;
 
-	if (res && res->flags & IORESOURCE_ROM_SHADOW)
+	if (res->flags & IORESOURCE_ROM_SHADOW)
 		return 1;
 
 	return 0;
diff --git a/arch/x86/xen/apic.c b/arch/x86/xen/apic.c
index acda713ab5be..db52a7fafcc2 100644
--- a/arch/x86/xen/apic.c
+++ b/arch/x86/xen/apic.c
@@ -64,9 +64,9 @@ static u32 xen_apic_read(u32 reg)
 	if (reg != APIC_ID)
 		return 0;
 
-	ret = HYPERVISOR_dom0_op(&op);
+	ret = HYPERVISOR_platform_op(&op);
 	if (ret)
-		return 0;
+		op.u.pcpu_info.apic_id = BAD_APICID;
 
 	return op.u.pcpu_info.apic_id << 24;
 }
@@ -142,6 +142,14 @@ static void xen_silent_inquire(int apicid)
 {
 }
 
+static int xen_cpu_present_to_apicid(int cpu)
+{
+	if (cpu_present(cpu))
+		return xen_get_apic_id(xen_apic_read(APIC_ID));
+	else
+		return BAD_APICID;
+}
+
 static struct apic xen_pv_apic = {
 	.name 				= "Xen PV",
 	.probe 				= xen_apic_probe_pv,
@@ -162,7 +170,7 @@ static struct apic xen_pv_apic = {
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map, /* Used on 32-bit */
 	.setup_apic_routing		= NULL,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+	.cpu_present_to_apicid		= xen_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= physid_set_mask_of_physid, /* Used on 32-bit */
 	.check_phys_apicid_present	= default_check_phys_apicid_present, /* smp_sanity_check needs it */
 	.phys_pkg_id			= xen_phys_pkg_id, /* detect_ht */
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 5774800ff583..880862c7d9dd 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -32,6 +32,7 @@
 #include <linux/gfp.h>
 #include <linux/memblock.h>
 #include <linux/edd.h>
+#include <linux/frame.h>
 
 #ifdef CONFIG_KEXEC_CORE
 #include <linux/kexec.h>
@@ -351,8 +352,8 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 	*cx &= maskecx;
 	*cx |= setecx;
 	*dx &= maskedx;
-
 }
+STACK_FRAME_NON_STANDARD(xen_cpuid); /* XEN_EMULATE_PREFIX */
 
 static bool __init xen_check_mwait(void)
 {
@@ -415,7 +416,7 @@ static bool __init xen_check_mwait(void)
 
 	set_xen_guest_handle(op.u.set_pminfo.pdc, buf);
 
-	if ((HYPERVISOR_dom0_op(&op) == 0) &&
+	if ((HYPERVISOR_platform_op(&op) == 0) &&
 	    (buf[2] & (ACPI_PDC_C_C1_FFH | ACPI_PDC_C_C2C3_FFH))) {
 		cpuid_leaf5_ecx_val = cx;
 		cpuid_leaf5_edx_val = dx;
@@ -961,7 +962,7 @@ static void xen_load_sp0(struct tss_struct *tss,
 	tss->x86_tss.sp0 = thread->sp0;
 }
 
-static void xen_set_iopl_mask(unsigned mask)
+void xen_set_iopl_mask(unsigned mask)
 {
 	struct physdev_set_iopl set_iopl;
 
@@ -1192,7 +1193,7 @@ static const struct pv_info xen_info __initconst = {
 #ifdef CONFIG_X86_64
 	.extra_user_64bit_cs = FLAT_USER_CS64,
 #endif
-
+	.features = 0,
 	.name = "Xen",
 };
 
@@ -1229,10 +1230,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 
 	.iret = xen_iret,
 #ifdef CONFIG_X86_64
-	.usergs_sysret32 = xen_sysret32,
 	.usergs_sysret64 = xen_sysret64,
-#else
-	.irq_enable_sysexit = xen_sysexit,
 #endif
 
 	.load_tr_desc = paravirt_nop,
@@ -1265,12 +1263,6 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 	.end_context_switch = xen_end_context_switch,
 };
 
-static const struct pv_apic_ops xen_apic_ops __initconst = {
-#ifdef CONFIG_X86_LOCAL_APIC
-	.startup_ipi_hook = paravirt_nop,
-#endif
-};
-
 static void xen_reboot(int reason)
 {
 	struct sched_shutdown r = { .reason = reason };
@@ -1374,7 +1366,7 @@ static void __init xen_boot_params_init_edd(void)
 		info->params.length = sizeof(info->params);
 		set_xen_guest_handle(op.u.firmware_info.u.disk_info.edd_params,
 				     &info->params);
-		ret = HYPERVISOR_dom0_op(&op);
+		ret = HYPERVISOR_platform_op(&op);
 		if (ret)
 			break;
 
@@ -1392,7 +1384,7 @@ static void __init xen_boot_params_init_edd(void)
 	op.u.firmware_info.type = XEN_FW_DISK_MBR_SIGNATURE;
 	for (nr = 0; nr < EDD_MBR_SIG_MAX; nr++) {
 		op.u.firmware_info.index = nr;
-		ret = HYPERVISOR_dom0_op(&op);
+		ret = HYPERVISOR_platform_op(&op);
 		if (ret)
 			break;
 		mbr_signature[nr] = op.u.firmware_info.u.disk_mbr_signature.mbr_signature;
@@ -1535,8 +1527,9 @@ asmlinkage __visible void __init xen_start_kernel(void)
 
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
+	if (xen_initial_domain())
+		pv_info.features |= PV_SUPPORTED_RTC;
 	pv_init_ops = xen_init_ops;
-	pv_apic_ops = xen_apic_ops;
 	if (!xen_pvh_domain()) {
 		pv_cpu_ops = xen_cpu_ops;
 
@@ -1662,7 +1655,7 @@ asmlinkage __visible void __init xen_start_kernel(void)
 	cpu_detect(&new_cpu_data);
 	set_cpu_cap(&new_cpu_data, X86_FEATURE_FPU);
 	new_cpu_data.wp_works_ok = 1;
-	new_cpu_data.x86_capability[0] = cpuid_edx(1);
+	new_cpu_data.x86_capability[CPUID_1_EDX] = cpuid_edx(1);
 #endif
 
 	if (xen_start_info->mod_start) {
@@ -1698,7 +1691,7 @@ asmlinkage __visible void __init xen_start_kernel(void)
 		xen_start_info->console.domU.mfn = 0;
 		xen_start_info->console.domU.evtchn = 0;
 
-		if (HYPERVISOR_dom0_op(&op) == 0)
+		if (HYPERVISOR_platform_op(&op) == 0)
 			boot_params.kbd_status = op.u.firmware_info.u.kbd_shift_flags;
 
 		/* Make sure ACS will be enabled */
@@ -1886,8 +1879,10 @@ EXPORT_SYMBOL_GPL(xen_hvm_need_lapic);
 
 static void xen_set_cpu_features(struct cpuinfo_x86 *c)
 {
-	if (xen_pv_domain())
+	if (xen_pv_domain()) {
 		clear_cpu_bug(c, X86_BUG_SYSRET_SS_ATTRS);
+		set_cpu_cap(c, X86_FEATURE_XENPV);
+	}
 }
 
 const struct hypervisor_x86 x86_hyper_xen = {
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index ac161db63388..478a2de543a5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1256,7 +1256,7 @@ static void __init xen_pagetable_cleanhighmap(void)
 	xen_cleanhighmap(addr, addr + size);
 	xen_start_info->pt_base = (unsigned long)__va(__pa(xen_start_info->pt_base));
 #ifdef DEBUG
-	/* This is superflous and is not neccessary, but you know what
+	/* This is superfluous and is not necessary, but you know what
 	 * lets do it. The MODULES_VADDR -> MODULES_END should be clear of
 	 * anything at this stage. */
 	xen_cleanhighmap(MODULES_VADDR, roundup(MODULES_VADDR, PUD_SIZE) - 1);
@@ -1474,7 +1474,7 @@ static void xen_write_cr3(unsigned long cr3)
 /*
  * At the start of the day - when Xen launches a guest, it has already
  * built pagetables for the guest. We diligently look over them
- * in xen_setup_kernel_pagetable and graft as appropiate them in the
+ * in xen_setup_kernel_pagetable and graft as appropriate them in the
  * init_level4_pgt and its friends. Then when we are happy we load
  * the new init_level4_pgt - and continue on.
  *
@@ -2436,7 +2436,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initconst = {
 	.flush_tlb_others = xen_flush_tlb_others,
 
 	.pte_update = paravirt_nop,
-	.pte_update_defer = paravirt_nop,
 
 	.pgd_alloc = xen_pgd_alloc,
 	.pgd_free = xen_pgd_free,
@@ -2495,14 +2494,9 @@ void __init xen_init_mmu_ops(void)
 {
 	x86_init.paging.pagetable_init = xen_pagetable_init;
 
-	/* Optimization - we can use the HVM one but it has no idea which
-	 * VCPUs are descheduled - which means that it will needlessly IPI
-	 * them. Xen knows so let it do the job.
-	 */
-	if (xen_feature(XENFEAT_auto_translated_physmap)) {
-		pv_mmu_ops.flush_tlb_others = xen_flush_tlb_others;
+	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return;
-	}
+
 	pv_mmu_ops = xen_mmu_ops;
 
 	memset(dummy_mapping, 0xff, PAGE_SIZE);
@@ -2798,7 +2792,7 @@ static int remap_area_mfn_pte_fn(pte_t *ptep, pgtable_t token,
 	struct remap_data *rmd = data;
 	pte_t pte = pte_mkspecial(mfn_pte(*rmd->mfn, rmd->prot));
 
-	/* If we have a contigious range, just update the mfn itself,
+	/* If we have a contiguous range, just update the mfn itself,
 	   else update pointer to be "next mfn". */
 	if (rmd->contiguous)
 		(*rmd->mfn)++;
@@ -2839,7 +2833,7 @@ static int do_remap_gfn(struct vm_area_struct *vma,
 
 	rmd.mfn = gfn;
 	rmd.prot = prot;
-	/* We use the err_ptr to indicate if there we are doing a contigious
+	/* We use the err_ptr to indicate if there we are doing a contiguous
 	 * mapping or a discontigious mapping. */
 	rmd.contiguous = !err_ptr;
 
diff --git a/arch/x86/xen/pmu.c b/arch/x86/xen/pmu.c
index 724a08740a04..9466354d3e49 100644
--- a/arch/x86/xen/pmu.c
+++ b/arch/x86/xen/pmu.c
@@ -11,7 +11,7 @@
 #include "pmu.h"
 
 /* x86_pmu.handle_irq definition */
-#include "../kernel/cpu/perf_event.h"
+#include "../events/perf_event.h"
 
 #define XENPMU_IRQ_PROCESSING    1
 struct xenpmu {
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 3f4ebf0261f2..719cf291dcdf 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -112,7 +112,7 @@ asmlinkage __visible void cpu_bringup_and_idle(int cpu)
 		xen_pvh_secondary_vcpu_init(cpu);
 #endif
 	cpu_bringup();
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 static void xen_smp_intr_free(unsigned int cpu)
@@ -545,6 +545,8 @@ static void xen_play_dead(void) /* used only with HOTPLUG_CPU */
 	 * data back is to call:
 	 */
 	tick_nohz_idle_enter();
+
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 #else /* !CONFIG_HOTPLUG_CPU */
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index feddabdab448..7f664c416faf 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -1,6 +1,7 @@
 #include <linux/types.h>
 #include <linux/tick.h>
 
+#include <xen/xen.h>
 #include <xen/interface/xen.h>
 #include <xen/grant_table.h>
 #include <xen/events.h>
@@ -33,7 +34,8 @@ static void xen_hvm_post_suspend(int suspend_cancelled)
 {
 #ifdef CONFIG_XEN_PVHVM
 	int cpu;
-	xen_hvm_init_shared_info();
+	if (!suspend_cancelled)
+	    xen_hvm_init_shared_info();
 	xen_callback_vector();
 	xen_unplug_emulated_devices();
 	if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
@@ -68,26 +70,16 @@ static void xen_pv_post_suspend(int suspend_cancelled)
 
 void xen_arch_pre_suspend(void)
 {
-	int cpu;
-
-	for_each_online_cpu(cpu)
-		xen_pmu_finish(cpu);
-
 	if (xen_pv_domain())
 		xen_pv_pre_suspend();
 }
 
 void xen_arch_post_suspend(int cancelled)
 {
-	int cpu;
-
 	if (xen_pv_domain())
 		xen_pv_post_suspend(cancelled);
 	else
 		xen_hvm_post_suspend(cancelled);
-
-	for_each_online_cpu(cpu)
-		xen_pmu_init(cpu);
 }
 
 static void xen_vcpu_notify_restore(void *data)
@@ -106,10 +98,20 @@ static void xen_vcpu_notify_suspend(void *data)
 
 void xen_arch_resume(void)
 {
+	int cpu;
+
 	on_each_cpu(xen_vcpu_notify_restore, NULL, 1);
+
+	for_each_online_cpu(cpu)
+		xen_pmu_init(cpu);
 }
 
 void xen_arch_suspend(void)
 {
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		xen_pmu_finish(cpu);
+
 	on_each_cpu(xen_vcpu_notify_suspend, NULL, 1);
 }
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index f1ba6a092854..a0a4e554c6f1 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -16,6 +16,7 @@
 #include <linux/gfp.h>
 #include <linux/slab.h>
 #include <linux/pvclock_gtod.h>
+#include <linux/timekeeper_internal.h>
 
 #include <asm/pvclock.h>
 #include <asm/xen/hypervisor.h>
@@ -32,86 +33,12 @@
 #define TIMER_SLOP	100000
 #define NS_PER_TICK	(1000000000LL / HZ)
 
-/* runstate info updated by Xen */
-static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate);
-
 /* snapshots of runstate info */
 static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate_snapshot);
 
 /* unused ns of stolen time */
 static DEFINE_PER_CPU(u64, xen_residual_stolen);
 
-/* return an consistent snapshot of 64-bit time/counter value */
-static u64 get64(const u64 *p)
-{
-	u64 ret;
-
-	if (BITS_PER_LONG < 64) {
-		u32 *p32 = (u32 *)p;
-		u32 h, l;
-
-		/*
-		 * Read high then low, and then make sure high is
-		 * still the same; this will only loop if low wraps
-		 * and carries into high.
-		 * XXX some clean way to make this endian-proof?
-		 */
-		do {
-			h = p32[1];
-			barrier();
-			l = p32[0];
-			barrier();
-		} while (p32[1] != h);
-
-		ret = (((u64)h) << 32) | l;
-	} else
-		ret = *p;
-
-	return ret;
-}
-
-/*
- * Runstate accounting
- */
-static void get_runstate_snapshot(struct vcpu_runstate_info *res)
-{
-	u64 state_time;
-	struct vcpu_runstate_info *state;
-
-	BUG_ON(preemptible());
-
-	state = this_cpu_ptr(&xen_runstate);
-
-	/*
-	 * The runstate info is always updated by the hypervisor on
-	 * the current CPU, so there's no need to use anything
-	 * stronger than a compiler barrier when fetching it.
-	 */
-	do {
-		state_time = get64(&state->state_entry_time);
-		barrier();
-		*res = *state;
-		barrier();
-	} while (get64(&state->state_entry_time) != state_time);
-}
-
-/* return true when a vcpu could run but has no real cpu to run on */
-bool xen_vcpu_stolen(int vcpu)
-{
-	return per_cpu(xen_runstate, vcpu).state == RUNSTATE_runnable;
-}
-
-void xen_setup_runstate_info(int cpu)
-{
-	struct vcpu_register_runstate_memory_area area;
-
-	area.addr.v = &per_cpu(xen_runstate, cpu);
-
-	if (HYPERVISOR_vcpu_op(VCPUOP_register_runstate_memory_area,
-			       cpu, &area))
-		BUG();
-}
-
 static void do_stolen_accounting(void)
 {
 	struct vcpu_runstate_info state;
@@ -119,7 +46,7 @@ static void do_stolen_accounting(void)
 	s64 runnable, offline, stolen;
 	cputime_t ticks;
 
-	get_runstate_snapshot(&state);
+	xen_get_runstate_snapshot(&state);
 
 	WARN_ON(state.state != RUNSTATE_running);
 
@@ -194,26 +121,46 @@ static int xen_pvclock_gtod_notify(struct notifier_block *nb,
 				   unsigned long was_set, void *priv)
 {
 	/* Protected by the calling core code serialization */
-	static struct timespec next_sync;
+	static struct timespec64 next_sync;
 
 	struct xen_platform_op op;
-	struct timespec now;
+	struct timespec64 now;
+	struct timekeeper *tk = priv;
+	static bool settime64_supported = true;
+	int ret;
 
-	now = __current_kernel_time();
+	now.tv_sec = tk->xtime_sec;
+	now.tv_nsec = (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift);
 
 	/*
 	 * We only take the expensive HV call when the clock was set
 	 * or when the 11 minutes RTC synchronization time elapsed.
 	 */
-	if (!was_set && timespec_compare(&now, &next_sync) < 0)
+	if (!was_set && timespec64_compare(&now, &next_sync) < 0)
 		return NOTIFY_OK;
 
-	op.cmd = XENPF_settime;
-	op.u.settime.secs = now.tv_sec;
-	op.u.settime.nsecs = now.tv_nsec;
-	op.u.settime.system_time = xen_clocksource_read();
+again:
+	if (settime64_supported) {
+		op.cmd = XENPF_settime64;
+		op.u.settime64.mbz = 0;
+		op.u.settime64.secs = now.tv_sec;
+		op.u.settime64.nsecs = now.tv_nsec;
+		op.u.settime64.system_time = xen_clocksource_read();
+	} else {
+		op.cmd = XENPF_settime32;
+		op.u.settime32.secs = now.tv_sec;
+		op.u.settime32.nsecs = now.tv_nsec;
+		op.u.settime32.system_time = xen_clocksource_read();
+	}
+
+	ret = HYPERVISOR_platform_op(&op);
 
-	(void)HYPERVISOR_dom0_op(&op);
+	if (ret == -ENOSYS && settime64_supported) {
+		settime64_supported = false;
+		goto again;
+	}
+	if (ret < 0)
+		return NOTIFY_BAD;
 
 	/*
 	 * Move the next drift compensation time 11 minutes
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 3e45aa000718..eff224df813f 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -14,6 +14,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/percpu.h>
 #include <asm/processor-flags.h>
+#include <asm/frame.h>
 
 #include "xen-asm.h"
 
@@ -23,6 +24,7 @@
  * then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
+	FRAME_BEGIN
 	/* Unmask events */
 	movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
 
@@ -39,6 +41,7 @@ ENTRY(xen_irq_enable_direct)
 2:	call check_events
 1:
 ENDPATCH(xen_irq_enable_direct)
+	FRAME_END
 	ret
 	ENDPROC(xen_irq_enable_direct)
 	RELOC(xen_irq_enable_direct, 2b+1)
@@ -82,6 +85,7 @@ ENDPATCH(xen_save_fl_direct)
  * enters the hypervisor to get them delivered if so.
  */
 ENTRY(xen_restore_fl_direct)
+	FRAME_BEGIN
 #ifdef CONFIG_X86_64
 	testw $X86_EFLAGS_IF, %di
 #else
@@ -100,6 +104,7 @@ ENTRY(xen_restore_fl_direct)
 2:	call check_events
 1:
 ENDPATCH(xen_restore_fl_direct)
+	FRAME_END
 	ret
 	ENDPROC(xen_restore_fl_direct)
 	RELOC(xen_restore_fl_direct, 2b+1)
@@ -109,7 +114,8 @@ ENDPATCH(xen_restore_fl_direct)
  * Force an event check by making a hypercall, but preserve regs
  * before making the call.
  */
-check_events:
+ENTRY(check_events)
+	FRAME_BEGIN
 #ifdef CONFIG_X86_32
 	push %eax
 	push %ecx
@@ -139,4 +145,6 @@ check_events:
 	pop %rcx
 	pop %rax
 #endif
+	FRAME_END
 	ret
+ENDPROC(check_events)
diff --git a/arch/x86/xen/xen-asm_32.S b/arch/x86/xen/xen-asm_32.S
index fd92a64d748e..feb6d40a0860 100644
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -35,20 +35,6 @@ check_events:
 	ret
 
 /*
- * We can't use sysexit directly, because we're not running in ring0.
- * But we can easily fake it up using iret.  Assuming xen_sysexit is
- * jumped to with a standard stack frame, we can just strip it back to
- * a standard iret frame and use iret.
- */
-ENTRY(xen_sysexit)
-	movl PT_EAX(%esp), %eax			/* Shouldn't be necessary? */
-	orl $X86_EFLAGS_IF, PT_EFLAGS(%esp)
-	lea PT_EIP(%esp), %esp
-
-	jmp xen_iret
-ENDPROC(xen_sysexit)
-
-/*
  * This is run where a normal iret would be run, with the same stack setup:
  *	8: eflags
  *	4: cs
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index f22667abf7b9..c3df43141e70 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -26,6 +26,7 @@ ENTRY(xen_adjust_exception_frame)
 	mov 8+0(%rsp), %rcx
 	mov 8+8(%rsp), %r11
 	ret $16
+ENDPROC(xen_adjust_exception_frame)
 
 hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
 /*
@@ -68,25 +69,6 @@ ENTRY(xen_sysret64)
 ENDPATCH(xen_sysret64)
 RELOC(xen_sysret64, 1b+1)
 
-ENTRY(xen_sysret32)
-	/*
-	 * We're already on the usermode stack at this point, but
-	 * still with the kernel gs, so we can easily switch back
-	 */
-	movq %rsp, PER_CPU_VAR(rsp_scratch)
-	movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
-
-	pushq $__USER32_DS
-	pushq PER_CPU_VAR(rsp_scratch)
-	pushq %r11
-	pushq $__USER32_CS
-	pushq %rcx
-
-	pushq $0
-1:	jmp hypercall_iret
-ENDPATCH(xen_sysret32)
-RELOC(xen_sysret32, 1b+1)
-
 /*
  * Xen handles syscall callbacks much like ordinary exceptions, which
  * means we have:
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index b65f59a358a2..7f8d8abf4c1a 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -26,7 +26,7 @@
 		      (1 << XENFEAT_auto_translated_physmap) | \
 		      (1 << XENFEAT_supervisor_mode_kernel) | \
 		      (1 << XENFEAT_hvm_callback_vector))
-/* The XENFEAT_writable_page_tables is not stricly neccessary as we set that
+/* The XENFEAT_writable_page_tables is not stricly necessary as we set that
  * up regardless whether this CONFIG option is enabled or not, but it
  * clarifies what the right flags need to be.
  */
@@ -38,13 +38,18 @@
 	__INIT
 ENTRY(startup_xen)
 	cld
-#ifdef CONFIG_X86_32
-	mov %esi,xen_start_info
-	mov $init_thread_union+THREAD_SIZE,%esp
-#else
-	mov %rsi,xen_start_info
-	mov $init_thread_union+THREAD_SIZE,%rsp
-#endif
+
+	/* Clear .bss */
+	xor %eax,%eax
+	mov $__bss_start, %_ASM_DI
+	mov $__bss_stop, %_ASM_CX
+	sub %_ASM_DI, %_ASM_CX
+	shr $__ASM_SEL(2, 3), %_ASM_CX
+	rep __ASM_SIZE(stos)
+
+	mov %_ASM_SI, xen_start_info
+	mov $init_thread_union+THREAD_SIZE, %_ASM_SP
+
 	jmp xen_start_kernel
 
 	__FINIT
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 1399423f3418..4140b070f2e9 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -139,9 +139,6 @@ DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
 /* These are not functions, and cannot be called normally */
 __visible void xen_iret(void);
-#ifdef CONFIG_X86_32
-__visible void xen_sysexit(void);
-#endif
 __visible void xen_sysret32(void);
 __visible void xen_sysret64(void);
 __visible void xen_adjust_exception_frame(void);
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 3bd3504a6cc7..e832d3e9835e 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -15,8 +15,9 @@ config XTENSA
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
 	select HAVE_FUNCTION_TRACER
+	select HAVE_FUTEX_CMPXCHG if !MMU
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
@@ -138,6 +139,22 @@ config XTENSA_VARIANT_HAVE_PERF_EVENTS
 
 	  If unsure, say N.
 
+config XTENSA_FAKE_NMI
+	bool "Treat PMM IRQ as NMI"
+	depends on XTENSA_VARIANT_HAVE_PERF_EVENTS
+	default n
+	help
+	  If PMM IRQ is the only IRQ at EXCM level it is safe to
+	  treat it as NMI, which improves accuracy of profiling.
+
+	  If there are other interrupts at or above PMM IRQ priority level
+	  but not above the EXCM level, PMM IRQ still may be treated as NMI,
+	  but only if these IRQs are not used. There will be a build warning
+	  saying that this is not safe, and a bugcheck if one of these IRQs
+	  actually fire.
+
+	  If unsure, say N.
+
 config XTENSA_UNALIGNED_USER
 	bool "Unaligned memory access in use space"
 	help
@@ -397,9 +414,21 @@ config SIMDISK1_FILENAME
 
 source "mm/Kconfig"
 
-source "drivers/pcmcia/Kconfig"
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
 
-source "drivers/pci/hotplug/Kconfig"
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+source "drivers/pcmcia/Kconfig"
 
 config PLATFORM_WANT_DEFAULT_MEM
 	def_bool n
@@ -408,7 +437,7 @@ config DEFAULT_MEM_START
 	hex "Physical address of the default memory area start"
 	depends on PLATFORM_WANT_DEFAULT_MEM
 	default 0x00000000 if MMU
-	default 0x40000000 if !MMU
+	default 0x60000000 if !MMU
 	help
 	  This is a fallback start address of the default memory area, it is
 	  used when no physical memory size is passed through DTB or through
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
index 709b5748a2d7..e54189427b31 100644
--- a/arch/xtensa/Makefile
+++ b/arch/xtensa/Makefile
@@ -53,9 +53,11 @@ endif
 
 ifeq ($(shell echo __XTENSA_EB__ | $(CC) -E - | grep -v "\#"),1)
 CHECKFLAGS += -D__XTENSA_EB__
+KBUILD_CPPFLAGS += -DCONFIG_CPU_BIG_ENDIAN
 endif
 ifeq ($(shell echo __XTENSA_EL__ | $(CC) -E - | grep -v "\#"),1)
 CHECKFLAGS += -D__XTENSA_EL__
+KBUILD_CPPFLAGS += -DCONFIG_CPU_LITTLE_ENDIAN
 endif
 
 vardirs := $(patsubst %,arch/xtensa/variants/%/,$(variant-y))
diff --git a/arch/xtensa/boot/boot-elf/boot.lds.S b/arch/xtensa/boot/boot-elf/boot.lds.S
index 958b33af96b7..e54f2c9df63a 100644
--- a/arch/xtensa/boot/boot-elf/boot.lds.S
+++ b/arch/xtensa/boot/boot-elf/boot.lds.S
@@ -40,17 +40,4 @@ SECTIONS
 		*(.bss)
 		__bss_end = .;
 	}
-
-#ifdef CONFIG_MMU
-	/*
-	 * This is a remapped copy of the Reset Vector Code.
-	 * It keeps gdb in sync with the PC after switching
-	 * to the temporary mapping used while setting up
-	 * the V2 MMU mappings for Linux.
-	 */
-	.ResetVector.remapped_text 0x46000000 (INFO):
-	{
-		*(.ResetVector.remapped_text)
-	}
-#endif
 }
diff --git a/arch/xtensa/boot/boot-elf/bootstrap.S b/arch/xtensa/boot/boot-elf/bootstrap.S
index 9341a5750694..e6bf313613cf 100644
--- a/arch/xtensa/boot/boot-elf/bootstrap.S
+++ b/arch/xtensa/boot/boot-elf/bootstrap.S
@@ -58,8 +58,6 @@ _SetupMMU:
 	wsr	a0, ps
 	rsync
 
-	Offset = _SetupMMU - _ResetVector
-
 #ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 	initialize_mmu
 #endif
@@ -74,29 +72,3 @@ reset:
 	movi	a3, 0
 	movi	a4, 0
 	jx      a0
-
-#ifdef CONFIG_MMU
-	.align 4
-
-	.section	.ResetVector.remapped_text, "x"
-	.global         _RemappedResetVector
-
-	/* Do org before literals */
-	.org 0
-
-_RemappedResetVector:
-	.begin  no-absolute-literals
-	.literal_position
-
-	_j	_RemappedSetupMMU
-
-	/* Position Remapped code at the same location as the original code */
-	. = _RemappedResetVector + Offset
-
-_RemappedSetupMMU:
-#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
-	initialize_mmu
-#endif
-
-	.end    no-absolute-literals
-#endif
diff --git a/arch/xtensa/boot/dts/kc705.dts b/arch/xtensa/boot/dts/kc705.dts
index c4d17a34ab86..b1f4ee8c9a22 100644
--- a/arch/xtensa/boot/dts/kc705.dts
+++ b/arch/xtensa/boot/dts/kc705.dts
@@ -5,7 +5,7 @@
 / {
 	compatible = "cdns,xtensa-kc705";
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000";
+		bootargs = "earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug memmap=0x38000000";
 	};
 	memory@0 {
 		device_type = "memory";
diff --git a/arch/xtensa/boot/dts/kc705_nommu.dts b/arch/xtensa/boot/dts/kc705_nommu.dts
new file mode 100644
index 000000000000..65f3d741b964
--- /dev/null
+++ b/arch/xtensa/boot/dts/kc705_nommu.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-128m.dtsi"
+
+/ {
+	compatible = "cdns,xtensa-kc705";
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
+	};
+	memory@0 {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+	soc {
+		ranges = <0x00000000 0x90000000 0x10000000>;
+	};
+};
diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi
index cd0b9e34adc8..cd45f9c2c448 100644
--- a/arch/xtensa/boot/dts/xtfpga.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga.dtsi
@@ -5,7 +5,7 @@
 	interrupt-parent = <&pic>;
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
+		bootargs = "earlycon=uart8250,mmio32native,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
 	};
 
 	memory@0 {
@@ -60,6 +60,8 @@
 			no-loopback-test;
 			reg = <0x0d050020 0x20>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
+			native-endian;
 			interrupts = <0 1>; /* external irq 0 */
 			clocks = <&osc>;
 		};
@@ -67,6 +69,7 @@
 		enet0: ethoc@0d030000 {
 			compatible = "opencores,ethoc";
 			reg = <0x0d030000 0x4000 0x0d800000 0x4000>;
+			native-endian;
 			interrupts = <1 1>; /* external irq 1 */
 			local-mac-address = [00 50 c2 13 6f 00];
 			clocks = <&osc>;
@@ -86,7 +89,8 @@
 			#size-cells = <0>;
 			reg = <0x0d090000 0x20>;
 			reg-shift = <2>;
-			reg-io-width = <1>;
+			reg-io-width = <4>;
+			native-endian;
 			interrupts = <4 1>;
 			clocks = <&osc>;
 
diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig
index f3dfe0d921c2..44c6764d9146 100644
--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -169,7 +169,6 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
diff --git a/arch/xtensa/configs/nommu_kc705_defconfig b/arch/xtensa/configs/nommu_kc705_defconfig
new file mode 100644
index 000000000000..337d5ba2d285
--- /dev/null
+++ b/arch/xtensa/configs/nommu_kc705_defconfig
@@ -0,0 +1,131 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212"
+# CONFIG_XTENSA_VARIANT_MMU is not set
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="kc705_nommu"
+CONFIG_DEFAULT_MEM_SIZE=0x10000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FRAME_POINTER is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_NOMMU_REGIONS=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+# CONFIG_RCU_CPU_STALL_INFO is not set
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_LD_NO_RELAX is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
diff --git a/arch/xtensa/include/asm/asmmacro.h b/arch/xtensa/include/asm/asmmacro.h
index 755320f6e0bc..746dcc8b5abc 100644
--- a/arch/xtensa/include/asm/asmmacro.h
+++ b/arch/xtensa/include/asm/asmmacro.h
@@ -35,9 +35,10 @@
  * __loop  as
  *	   restart loop. 'as' register must not have been modified!
  *
- * __endla ar, at, incr
+ * __endla ar, as, incr
  *	   ar	start address (modified)
- *	   as	scratch register used by macro
+ *	   as	scratch register used by __loops/__loopi macros or
+ *		end address used by __loopt macro
  *	   inc	increment
  */
 
@@ -97,7 +98,7 @@
 	.endm
 
 /*
- * loop from ar to ax
+ * loop from ar to as
  */
 
 	.macro	__loopt	ar, as, at, incr_log2
diff --git a/arch/xtensa/include/asm/barrier.h b/arch/xtensa/include/asm/barrier.h
index 5b88774c75ab..956596e4d437 100644
--- a/arch/xtensa/include/asm/barrier.h
+++ b/arch/xtensa/include/asm/barrier.h
@@ -13,8 +13,8 @@
 #define rmb() barrier()
 #define wmb() mb()
 
-#define smp_mb__before_atomic()		barrier()
-#define smp_mb__after_atomic()		barrier()
+#define __smp_mb__before_atomic()		barrier()
+#define __smp_mb__after_atomic()		barrier()
 
 #include <asm-generic/barrier.h>
 
diff --git a/arch/xtensa/include/asm/cacheasm.h b/arch/xtensa/include/asm/cacheasm.h
index 60e18773ecb8..e0f9e1109c83 100644
--- a/arch/xtensa/include/asm/cacheasm.h
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -73,7 +73,9 @@
 
 	.macro	___unlock_dcache_all ar at
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
@@ -90,30 +92,38 @@
 
 	.macro	___flush_invalidate_dcache_all ar at
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___flush_dcache_all ar at
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___invalidate_dcache_all ar at
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
 			 XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___invalidate_icache_all ar at
 
+#if XCHAL_ICACHE_SIZE
 	__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
 			 XCHAL_ICACHE_LINEWIDTH
+#endif
 
 	.endm
 
@@ -121,28 +131,36 @@
 
 	.macro	___flush_invalidate_dcache_range ar as at
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___flush_dcache_range ar as at
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___invalidate_dcache_range ar as at
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___invalidate_icache_range ar as at
 
+#if XCHAL_ICACHE_SIZE
 	__loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH
+#endif
 
 	.endm
 
@@ -150,27 +168,35 @@
 
 	.macro	___flush_invalidate_dcache_page ar as
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro ___flush_dcache_page ar as
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___invalidate_dcache_page ar as
 
+#if XCHAL_DCACHE_SIZE
 	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
+#endif
 
 	.endm
 
 
 	.macro	___invalidate_icache_page ar as
 
+#if XCHAL_ICACHE_SIZE
 	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
+#endif
 
 	.endm
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index 5f67ace97b32..397d6a1a4224 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -55,9 +55,14 @@ extern void __flush_dcache_range(unsigned long, unsigned long);
 extern void __flush_invalidate_dcache_page(unsigned long);
 extern void __flush_invalidate_dcache_range(unsigned long, unsigned long);
 #else
-# define __flush_dcache_range(p,s)		do { } while(0)
-# define __flush_dcache_page(p)			do { } while(0)
-# define __flush_invalidate_dcache_page(p) 	__invalidate_dcache_page(p)
+static inline void __flush_dcache_page(unsigned long va)
+{
+}
+static inline void __flush_dcache_range(unsigned long va, unsigned long sz)
+{
+}
+# define __flush_invalidate_dcache_all()	__invalidate_dcache_all()
+# define __flush_invalidate_dcache_page(p)	__invalidate_dcache_page(p)
 # define __flush_invalidate_dcache_range(p,s)	__invalidate_dcache_range(p,s)
 #endif
 
@@ -174,99 +179,4 @@ extern void copy_from_user_page(struct vm_area_struct*, struct page*,
 
 #endif
 
-#define XTENSA_CACHEBLK_LOG2	29
-#define XTENSA_CACHEBLK_SIZE	(1 << XTENSA_CACHEBLK_LOG2)
-#define XTENSA_CACHEBLK_MASK	(7 << XTENSA_CACHEBLK_LOG2)
-
-#if XCHAL_HAVE_CACHEATTR
-static inline u32 xtensa_get_cacheattr(void)
-{
-	u32 r;
-	asm volatile("	rsr %0, cacheattr" : "=a"(r));
-	return r;
-}
-
-static inline u32 xtensa_get_dtlb1(u32 addr)
-{
-	u32 r = addr & XTENSA_CACHEBLK_MASK;
-	return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2)))
-			& 0xF);
-}
-#else
-static inline u32 xtensa_get_dtlb1(u32 addr)
-{
-	u32 r;
-	asm volatile("	rdtlb1 %0, %1" : "=a"(r) : "a"(addr));
-	asm volatile("	dsync");
-	return r;
-}
-
-static inline u32 xtensa_get_cacheattr(void)
-{
-	u32 r = 0;
-	u32 a = 0;
-	do {
-		a -= XTENSA_CACHEBLK_SIZE;
-		r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF);
-	} while (a);
-	return r;
-}
-#endif
-
-static inline int xtensa_need_flush_dma_source(u32 addr)
-{
-	return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4;
-}
-
-static inline int xtensa_need_invalidate_dma_destination(u32 addr)
-{
-	return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2;
-}
-
-static inline void flush_dcache_unaligned(u32 addr, u32 size)
-{
-	u32 cnt;
-	if (size) {
-		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
-			+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
-		while (cnt--) {
-			asm volatile("	dhwb %0, 0" : : "a"(addr));
-			addr += XCHAL_DCACHE_LINESIZE;
-		}
-		asm volatile("	dsync");
-	}
-}
-
-static inline void invalidate_dcache_unaligned(u32 addr, u32 size)
-{
-	int cnt;
-	if (size) {
-		asm volatile("	dhwbi %0, 0 ;" : : "a"(addr));
-		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
-			- XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
-		while (cnt-- > 0) {
-			asm volatile("	dhi %0, %1" : : "a"(addr),
-						"n"(XCHAL_DCACHE_LINESIZE));
-			addr += XCHAL_DCACHE_LINESIZE;
-		}
-		asm volatile("	dhwbi %0, %1" : : "a"(addr),
-						"n"(XCHAL_DCACHE_LINESIZE));
-		asm volatile("	dsync");
-	}
-}
-
-static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size)
-{
-	u32 cnt;
-	if (size) {
-		cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
-			+ XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
-		while (cnt--) {
-			asm volatile("	dhwbi %0, 0" : : "a"(addr));
-			addr += XCHAL_DCACHE_LINESIZE;
-		}
-		asm volatile("	dsync");
-	}
-}
-
 #endif /* _XTENSA_CACHEFLUSH_H */
diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index 0593de689b56..ec35074fcb03 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -123,9 +123,8 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 }
 
 static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
-						   unsigned short len,
-						   unsigned short proto,
-						   __wsum sum)
+					    __u32 len, __u8 proto,
+					    __wsum sum)
 {
 
 #ifdef __XTENSA_EL__
@@ -157,9 +156,8 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
  * returns a 16-bit checksum, already complemented
  */
 static __inline__ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
-						       unsigned short len,
-						       unsigned short proto,
-						       __wsum sum)
+					    __u32 len, __u8 proto,
+					    __wsum sum)
 {
 	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
 }
@@ -177,7 +175,7 @@ static __inline__ __sum16 ip_compute_csum(const void *buff, int len)
 #define _HAVE_ARCH_IPV6_CSUM
 static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
 					  const struct in6_addr *daddr,
-					  __u32 len, unsigned short proto,
+					  __u32 len, __u8 proto,
 					  __wsum sum)
 {
 	unsigned int __dummy;
diff --git a/arch/xtensa/include/asm/dma-mapping.h b/arch/xtensa/include/asm/dma-mapping.h
index 4427f38b634e..3fc1170a6488 100644
--- a/arch/xtensa/include/asm/dma-mapping.h
+++ b/arch/xtensa/include/asm/dma-mapping.h
@@ -13,8 +13,6 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 
-#include <asm-generic/dma-coherent.h>
-
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
 
@@ -30,9 +28,17 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 		return &xtensa_dma_map_ops;
 }
 
-#include <asm-generic/dma-mapping-common.h>
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction direction);
 
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return (dma_addr_t)paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return (phys_addr_t)daddr;
+}
+
 #endif	/* _XTENSA_DMA_MAPPING_H */
diff --git a/arch/xtensa/include/asm/gpio.h b/arch/xtensa/include/asm/gpio.h
deleted file mode 100644
index b3799d88ffcf..000000000000
--- a/arch/xtensa/include/asm/gpio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __LINUX_GPIO_H
-#warning Include linux/gpio.h instead of asm/gpio.h
-#include <linux/gpio.h>
-#endif
diff --git a/arch/xtensa/include/asm/hw_breakpoint.h b/arch/xtensa/include/asm/hw_breakpoint.h
new file mode 100644
index 000000000000..dbe3053b284a
--- /dev/null
+++ b/arch/xtensa/include/asm/hw_breakpoint.h
@@ -0,0 +1,58 @@
+/*
+ * Xtensa hardware breakpoints/watchpoints handling functions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2016 Cadence Design Systems Inc.
+ */
+
+#ifndef __ASM_XTENSA_HW_BREAKPOINT_H
+#define __ASM_XTENSA_HW_BREAKPOINT_H
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+
+#include <linux/kdebug.h>
+#include <linux/types.h>
+#include <uapi/linux/hw_breakpoint.h>
+
+/* Breakpoint */
+#define XTENSA_BREAKPOINT_EXECUTE	0
+
+/* Watchpoints */
+#define XTENSA_BREAKPOINT_LOAD		1
+#define XTENSA_BREAKPOINT_STORE		2
+
+struct arch_hw_breakpoint {
+	unsigned long address;
+	u16 len;
+	u16 type;
+};
+
+struct perf_event;
+struct pt_regs;
+struct task_struct;
+
+int hw_breakpoint_slots(int type);
+int arch_check_bp_in_kernelspace(struct perf_event *bp);
+int arch_validate_hwbkpt_settings(struct perf_event *bp);
+int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+				    unsigned long val, void *data);
+
+int arch_install_hw_breakpoint(struct perf_event *bp);
+void arch_uninstall_hw_breakpoint(struct perf_event *bp);
+void hw_breakpoint_pmu_read(struct perf_event *bp);
+int check_hw_breakpoint(struct pt_regs *regs);
+void clear_ptrace_hw_breakpoint(struct task_struct *tsk);
+
+#else
+
+struct task_struct;
+
+static inline void clear_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+}
+
+#endif /* CONFIG_HAVE_HW_BREAKPOINT */
+#endif /* __ASM_XTENSA_HW_BREAKPOINT_H */
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index e256f2270ec9..7a1e075969a3 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -161,7 +161,8 @@
 #endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
 	  XCHAL_HAVE_SPANNING_WAY */
 
-#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS
+#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \
+		(XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE)
 	/* Enable data and instruction cache in the DEFAULT_MEMORY region
 	 * if the processor has DTLB and ITLB.
 	 */
@@ -175,14 +176,18 @@
 1:
 	sub	a9, a9, a8
 2:
+#if XCHAL_DCACHE_SIZE
 	rdtlb1	a3, a5
-	ritlb1	a4, a5
 	and	a3, a3, a6
-	and	a4, a4, a6
 	or	a3, a3, a7
-	or	a4, a4, a7
 	wdtlb	a3, a5
+#endif
+#if XCHAL_ICACHE_SIZE
+	ritlb1	a4, a5
+	and	a4, a4, a6
+	or	a4, a4, a7
 	witlb	a4, a5
+#endif
 	add	a5, a5, a8
 	bltu	a8, a9, 1b
 
diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h
index 867840f5400f..c38e5a732d86 100644
--- a/arch/xtensa/include/asm/io.h
+++ b/arch/xtensa/include/asm/io.h
@@ -25,18 +25,12 @@
 
 #ifdef CONFIG_MMU
 
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
-extern unsigned long xtensa_kio_paddr;
-
-static inline unsigned long xtensa_get_kio_paddr(void)
-{
-	return xtensa_kio_paddr;
-}
-#endif
+void __iomem *xtensa_ioremap_nocache(unsigned long addr, unsigned long size);
+void __iomem *xtensa_ioremap_cache(unsigned long addr, unsigned long size);
+void xtensa_iounmap(volatile void __iomem *addr);
 
 /*
  * Return the virtual address for the specified bus memory.
- * Note that we currently don't support any address outside the KIO segment.
  */
 static inline void __iomem *ioremap_nocache(unsigned long offset,
 		unsigned long size)
@@ -45,7 +39,7 @@ static inline void __iomem *ioremap_nocache(unsigned long offset,
 	    && offset - XCHAL_KIO_PADDR < XCHAL_KIO_SIZE)
 		return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR);
 	else
-		BUG();
+		return xtensa_ioremap_nocache(offset, size);
 }
 
 static inline void __iomem *ioremap_cache(unsigned long offset,
@@ -55,7 +49,7 @@ static inline void __iomem *ioremap_cache(unsigned long offset,
 	    && offset - XCHAL_KIO_PADDR < XCHAL_KIO_SIZE)
 		return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR);
 	else
-		BUG();
+		return xtensa_ioremap_cache(offset, size);
 }
 #define ioremap_cache ioremap_cache
 
@@ -69,6 +63,13 @@ static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
 
 static inline void iounmap(volatile void __iomem *addr)
 {
+	unsigned long va = (unsigned long) addr;
+
+	if (!(va >= XCHAL_KIO_CACHED_VADDR &&
+	      va - XCHAL_KIO_CACHED_VADDR < XCHAL_KIO_SIZE) &&
+	    !(va >= XCHAL_KIO_BYPASS_VADDR &&
+	      va - XCHAL_KIO_BYPASS_VADDR < XCHAL_KIO_SIZE))
+		xtensa_iounmap(addr);
 }
 
 #define virt_to_bus     virt_to_phys
diff --git a/arch/xtensa/include/asm/irqflags.h b/arch/xtensa/include/asm/irqflags.h
index 8e090c709046..407606e576f8 100644
--- a/arch/xtensa/include/asm/irqflags.h
+++ b/arch/xtensa/include/asm/irqflags.h
@@ -13,6 +13,7 @@
 #define _XTENSA_IRQFLAGS_H
 
 #include <linux/types.h>
+#include <asm/processor.h>
 
 static inline unsigned long arch_local_save_flags(void)
 {
diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h
index e438a00fbd63..5d6bd932ba4e 100644
--- a/arch/xtensa/include/asm/pci.h
+++ b/arch/xtensa/include/asm/pci.h
@@ -55,9 +55,6 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
 
 #endif /* __KERNEL__ */
 
-/* Implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
 /* Generic PCI */
 #include <asm-generic/pci.h>
 
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index a5e929a10c20..fb02fdc5ecee 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -18,7 +18,11 @@
  * We only use two ring levels, user and kernel space.
  */
 
+#ifdef CONFIG_MMU
 #define USER_RING		1	/* user ring level */
+#else
+#define USER_RING		0
+#endif
 #define KERNEL_RING		0	/* kernel ring level */
 
 /*
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index 83e2e4bc01ba..d2e40d39c615 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -78,22 +78,20 @@
 #define XTENSA_INTLEVEL_MASK(level) _XTENSA_INTLEVEL_MASK(level)
 #define _XTENSA_INTLEVEL_MASK(level) (XCHAL_INTLEVEL##level##_MASK)
 
-#define IS_POW2(v) (((v) & ((v) - 1)) == 0)
+#define XTENSA_INTLEVEL_ANDBELOW_MASK(l) _XTENSA_INTLEVEL_ANDBELOW_MASK(l)
+#define _XTENSA_INTLEVEL_ANDBELOW_MASK(l) (XCHAL_INTLEVEL##l##_ANDBELOW_MASK)
 
 #define PROFILING_INTLEVEL XTENSA_INT_LEVEL(XCHAL_PROFILING_INTERRUPT)
 
 /* LOCKLEVEL defines the interrupt level that masks all
  * general-purpose interrupts.
  */
-#if defined(CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS) && \
-	defined(XCHAL_PROFILING_INTERRUPT) && \
-	PROFILING_INTLEVEL == XCHAL_EXCM_LEVEL && \
-	XCHAL_EXCM_LEVEL > 1 && \
-	IS_POW2(XTENSA_INTLEVEL_MASK(PROFILING_INTLEVEL))
-#define LOCKLEVEL (XCHAL_EXCM_LEVEL - 1)
+#if defined(CONFIG_XTENSA_FAKE_NMI) && defined(XCHAL_PROFILING_INTERRUPT)
+#define LOCKLEVEL (PROFILING_INTLEVEL - 1)
 #else
 #define LOCKLEVEL XCHAL_EXCM_LEVEL
 #endif
+
 #define TOPLEVEL XCHAL_EXCM_LEVEL
 #define XTENSA_FAKE_NMI (LOCKLEVEL < TOPLEVEL)
 
@@ -132,11 +130,10 @@ struct thread_struct {
 	unsigned long bad_vaddr; /* last user fault */
 	unsigned long bad_uaddr; /* last kernel fault accessing user space */
 	unsigned long error_code;
-
-	unsigned long ibreak[XCHAL_NUM_IBREAK];
-	unsigned long dbreaka[XCHAL_NUM_DBREAK];
-	unsigned long dbreakc[XCHAL_NUM_DBREAK];
-
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	struct perf_event *ptrace_bp[XCHAL_NUM_IBREAK];
+	struct perf_event *ptrace_wp[XCHAL_NUM_DBREAK];
+#endif
 	/* Make structure 16 bytes aligned. */
 	int align[0] __attribute__ ((aligned(16)));
 };
diff --git a/arch/xtensa/include/asm/regs.h b/arch/xtensa/include/asm/regs.h
index 4ba9f516b0e2..881a1134a4b4 100644
--- a/arch/xtensa/include/asm/regs.h
+++ b/arch/xtensa/include/asm/regs.h
@@ -28,6 +28,7 @@
 /*  Special registers.  */
 
 #define SREG_MR			32
+#define SREG_IBREAKENABLE	96
 #define SREG_IBREAKA		128
 #define SREG_DBREAKA		144
 #define SREG_DBREAKC		160
@@ -103,6 +104,8 @@
 
 /*  DEBUGCAUSE register fields.  */
 
+#define DEBUGCAUSE_DBNUM_MASK		0xf00
+#define DEBUGCAUSE_DBNUM_SHIFT		8	/* First bit of DBNUM field */
 #define DEBUGCAUSE_DEBUGINT_BIT		5	/* External debug interrupt */
 #define DEBUGCAUSE_BREAKN_BIT		4	/* BREAK.N instruction */
 #define DEBUGCAUSE_BREAK_BIT		3	/* BREAK instruction */
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index 9ad12c617184..7be2400f745a 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -111,6 +111,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		5	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	6	/* restore signal mask in do_signal() */
 #define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
+#define TIF_DB_DISABLED		8	/* debug trap disabled for syscall */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index ca929e6a38b5..f9b389d4e973 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -12,19 +12,16 @@
 #include <asm/processor.h>
 #include <linux/stringify.h>
 
-#define _INTLEVEL(x)	XCHAL_INT ## x ## _LEVEL
-#define INTLEVEL(x)	_INTLEVEL(x)
-
 #if XCHAL_NUM_TIMERS > 0 && \
-	INTLEVEL(XCHAL_TIMER0_INTERRUPT) <= XCHAL_EXCM_LEVEL
+	XTENSA_INT_LEVEL(XCHAL_TIMER0_INTERRUPT) <= XCHAL_EXCM_LEVEL
 # define LINUX_TIMER     0
 # define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT
 #elif XCHAL_NUM_TIMERS > 1 && \
-	INTLEVEL(XCHAL_TIMER1_INTERRUPT) <= XCHAL_EXCM_LEVEL
+	XTENSA_INT_LEVEL(XCHAL_TIMER1_INTERRUPT) <= XCHAL_EXCM_LEVEL
 # define LINUX_TIMER     1
 # define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT
 #elif XCHAL_NUM_TIMERS > 2 && \
-	INTLEVEL(XCHAL_TIMER2_INTERRUPT) <= XCHAL_EXCM_LEVEL
+	XTENSA_INT_LEVEL(XCHAL_TIMER2_INTERRUPT) <= XCHAL_EXCM_LEVEL
 # define LINUX_TIMER     2
 # define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT
 #else
diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h
index 28f33a8b7f5f..2e69aa4b843f 100644
--- a/arch/xtensa/include/asm/traps.h
+++ b/arch/xtensa/include/asm/traps.h
@@ -65,4 +65,21 @@ static inline void spill_registers(void)
 #endif
 }
 
+struct debug_table {
+	/* Pointer to debug exception handler */
+	void (*debug_exception)(void);
+	/* Temporary register save area */
+	unsigned long debug_save[1];
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	/* Save area for DBREAKC registers */
+	unsigned long dbreakc_save[XCHAL_NUM_DBREAK];
+	/* Saved ICOUNT register */
+	unsigned long icount_save;
+	/* Saved ICOUNTLEVEL register */
+	unsigned long icount_level_save;
+#endif
+};
+
+void debug_exception(void);
+
 #endif /* _XTENSA_TRAPS_H */
diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h
index a46c53f36113..288c776736d3 100644
--- a/arch/xtensa/include/asm/vectors.h
+++ b/arch/xtensa/include/asm/vectors.h
@@ -21,13 +21,26 @@
 #include <variant/core.h>
 #include <platform/hardware.h>
 
+#if XCHAL_HAVE_PTP_MMU
 #define XCHAL_KIO_CACHED_VADDR		0xe0000000
 #define XCHAL_KIO_BYPASS_VADDR		0xf0000000
 #define XCHAL_KIO_DEFAULT_PADDR		0xf0000000
+#else
+#define XCHAL_KIO_BYPASS_VADDR		XCHAL_KIO_PADDR
+#define XCHAL_KIO_DEFAULT_PADDR		0x90000000
+#endif
 #define XCHAL_KIO_SIZE			0x10000000
 
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
+#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF)
 #define XCHAL_KIO_PADDR			xtensa_get_kio_paddr()
+#ifndef __ASSEMBLY__
+extern unsigned long xtensa_kio_paddr;
+
+static inline unsigned long xtensa_get_kio_paddr(void)
+{
+	return xtensa_kio_paddr;
+}
+#endif
 #else
 #define XCHAL_KIO_PADDR			XCHAL_KIO_DEFAULT_PADDR
 #endif
@@ -48,6 +61,9 @@
   #define LOAD_MEMORY_ADDRESS		0xD0003000
 #endif
 
+#define RESET_VECTOR1_VADDR		(VIRTUAL_MEMORY_ADDRESS + \
+					 XCHAL_RESET_VECTOR1_PADDR)
+
 #else /* !defined(CONFIG_MMU) */
   /* MMU Not being used - Virtual == Physical */
 
@@ -60,6 +76,8 @@
   /* Loaded just above possibly live vectors */
   #define LOAD_MEMORY_ADDRESS		(PLATFORM_DEFAULT_MEM_START + 0x3000)
 
+#define RESET_VECTOR1_VADDR		(XCHAL_RESET_VECTOR1_VADDR)
+
 #endif /* CONFIG_MMU */
 
 #define XC_VADDR(offset)		(VIRTUAL_MEMORY_ADDRESS  + offset)
@@ -67,14 +85,6 @@
 /* Used to set VECBASE register */
 #define VECBASE_RESET_VADDR		VIRTUAL_MEMORY_ADDRESS
 
-#define RESET_VECTOR_VECOFS		(XCHAL_RESET_VECTOR_VADDR - \
-						VECBASE_RESET_VADDR)
-#define RESET_VECTOR_VADDR		XC_VADDR(RESET_VECTOR_VECOFS)
-
-#define RESET_VECTOR1_VECOFS		(XCHAL_RESET_VECTOR1_VADDR - \
-						VECBASE_RESET_VADDR)
-#define RESET_VECTOR1_VADDR		XC_VADDR(RESET_VECTOR1_VECOFS)
-
 #if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE
 
 #define USER_VECTOR_VADDR		XC_VADDR(XCHAL_USER_VECOFS)
diff --git a/arch/xtensa/include/uapi/asm/mman.h b/arch/xtensa/include/uapi/asm/mman.h
index 360944e1da52..9e079d49e7f2 100644
--- a/arch/xtensa/include/uapi/asm/mman.h
+++ b/arch/xtensa/include/uapi/asm/mman.h
@@ -88,6 +88,7 @@
 #define MADV_DONTNEED	4		/* don't need these pages */
 
 /* common parameters: try to keep these consistent across architectures */
+#define MADV_FREE	8		/* free pages only if memory pressure */
 #define MADV_REMOVE	9		/* remove these pages & resources */
 #define MADV_DONTFORK	10		/* don't inherit across fork */
 #define MADV_DOFORK	11		/* do inherit across fork */
diff --git a/arch/xtensa/include/uapi/asm/ptrace.h b/arch/xtensa/include/uapi/asm/ptrace.h
index ee17aa842fdf..6ccbd9e38e35 100644
--- a/arch/xtensa/include/uapi/asm/ptrace.h
+++ b/arch/xtensa/include/uapi/asm/ptrace.h
@@ -72,6 +72,8 @@
 #define PTRACE_SETREGS		13
 #define PTRACE_GETXTREGS	18
 #define PTRACE_SETXTREGS	19
+#define PTRACE_GETHBPREGS	20
+#define PTRACE_SETHBPREGS	21
 
 
 #endif /* _UAPI_XTENSA_PTRACE_H */
diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h
index 4120af086160..81435d995e11 100644
--- a/arch/xtensa/include/uapi/asm/socket.h
+++ b/arch/xtensa/include/uapi/asm/socket.h
@@ -96,4 +96,9 @@
 #define SO_ATTACH_BPF		50
 #define SO_DETACH_BPF		SO_DETACH_FILTER
 
+#define SO_ATTACH_REUSEPORT_CBPF	51
+#define SO_ATTACH_REUSEPORT_EBPF	52
+
+#define SO_CNX_ADVICE		53
+
 #endif	/* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 50137bc9e150..c31f5d5afc7d 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -8,14 +8,15 @@ obj-y := align.o coprocessor.o entry.o irq.o pci-dma.o platform.o process.o \
 	 ptrace.o setup.o signal.o stacktrace.o syscall.o time.o traps.o \
 	 vectors.o
 
-obj-$(CONFIG_KGDB) += xtensa-stub.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
 obj-$(CONFIG_FUNCTION_TRACER) += mcount.o
 obj-$(CONFIG_SMP) += smp.o mxhead.o
 obj-$(CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS) += perf_event.o
+obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
 
 AFLAGS_head.o += -mtext-section-literals
+AFLAGS_mxhead.o += -mtext-section-literals
 
 # In the Xtensa architecture, assembly generates literals which must always
 # precede the L32R instruction with a relative offset less than 256 kB.
diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c
index b123ace3b67c..8e10e357ee32 100644
--- a/arch/xtensa/kernel/asm-offsets.c
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -23,6 +23,7 @@
 #include <linux/kbuild.h>
 
 #include <asm/ptrace.h>
+#include <asm/traps.h>
 #include <asm/uaccess.h>
 
 int main(void)
@@ -117,5 +118,16 @@ int main(void)
 	DEFINE(_CLONE_UNTRACED, CLONE_UNTRACED);
 	DEFINE(PG_ARCH_1, PG_arch_1);
 
+	/* struct debug_table */
+	DEFINE(DT_DEBUG_EXCEPTION,
+	       offsetof(struct debug_table, debug_exception));
+	DEFINE(DT_DEBUG_SAVE, offsetof(struct debug_table, debug_save));
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	DEFINE(DT_DBREAKC_SAVE, offsetof(struct debug_table, dbreakc_save));
+	DEFINE(DT_ICOUNT_SAVE, offsetof(struct debug_table, icount_save));
+	DEFINE(DT_ICOUNT_LEVEL_SAVE,
+	       offsetof(struct debug_table, icount_level_save));
+#endif
+
 	return 0;
 }
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 504130357597..fe8f7e7efb9d 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -367,8 +367,10 @@ common_exception:
 	s32i	a2, a1, PT_SYSCALL
 	movi	a2, 0
 	s32i	a3, a1, PT_EXCVADDR
+#if XCHAL_HAVE_LOOPS
 	xsr	a2, lcount
 	s32i	a2, a1, PT_LCOUNT
+#endif
 
 	/* It is now save to restore the EXC_TABLE_FIXUP variable. */
 
@@ -429,11 +431,12 @@ common_exception:
 	rsync				# PS.WOE => rsync => overflow
 
 	/* Save lbeg, lend */
-
+#if XCHAL_HAVE_LOOPS
 	rsr	a4, lbeg
 	rsr	a3, lend
 	s32i	a4, a1, PT_LBEG
 	s32i	a3, a1, PT_LEND
+#endif
 
 	/* Save SCOMPARE1 */
 
@@ -540,6 +543,12 @@ common_exception_return:
 #endif
 
 5:
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	_bbci.l	a4, TIF_DB_DISABLED, 7f
+	movi	a4, restore_dbreak
+	callx4	a4
+7:
+#endif
 #ifdef CONFIG_DEBUG_TLB_SANITY
 	l32i	a4, a1, PT_DEPC
 	bgeui	a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f
@@ -724,13 +733,14 @@ common_exception_exit:
 	wsr	a3, sar
 
 	/* Restore LBEG, LEND, LCOUNT */
-
+#if XCHAL_HAVE_LOOPS
 	l32i	a2, a1, PT_LBEG
 	l32i	a3, a1, PT_LEND
 	wsr	a2, lbeg
 	l32i	a2, a1, PT_LCOUNT
 	wsr	a3, lend
 	wsr	a2, lcount
+#endif
 
 	/* We control single stepping through the ICOUNTLEVEL register. */
 
@@ -785,39 +795,99 @@ ENTRY(debug_exception)
 
 	movi	a2, 1 << PS_EXCM_BIT
 	or	a2, a0, a2
-	movi	a0, debug_exception	# restore a3, debug jump vector
 	wsr	a2, ps
-	xsr	a0, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
 
 	/* Switch to kernel/user stack, restore jump vector, and save a0 */
 
 	bbsi.l	a2, PS_UM_BIT, 2f	# jump if user mode
 
 	addi	a2, a1, -16-PT_SIZE	# assume kernel stack
+3:
+	l32i	a0, a3, DT_DEBUG_SAVE
+	s32i	a1, a2, PT_AREG1
 	s32i	a0, a2, PT_AREG0
 	movi	a0, 0
-	s32i	a1, a2, PT_AREG1
 	s32i	a0, a2, PT_DEPC		# mark it as a regular exception
+	xsr	a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
 	xsr	a0, depc
 	s32i	a3, a2, PT_AREG3
 	s32i	a0, a2, PT_AREG2
 	mov	a1, a2
+
+	/* Debug exception is handled as an exception, so interrupts will
+	 * likely be enabled in the common exception handler. Disable
+	 * preemption if we have HW breakpoints to preserve DEBUGCAUSE.DBNUM
+	 * meaning.
+	 */
+#if defined(CONFIG_PREEMPT_COUNT) && defined(CONFIG_HAVE_HW_BREAKPOINT)
+	GET_THREAD_INFO(a2, a1)
+	l32i	a3, a2, TI_PRE_COUNT
+	addi	a3, a3, 1
+	s32i	a3, a2, TI_PRE_COUNT
+#endif
+
+	rsr	a2, ps
+	bbsi.l	a2, PS_UM_BIT, _user_exception
 	j	_kernel_exception
 
 2:	rsr	a2, excsave1
 	l32i	a2, a2, EXC_TABLE_KSTK	# load kernel stack pointer
-	s32i	a0, a2, PT_AREG0
+	j	3b
+
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	/* Debug exception while in exception mode. This may happen when
+	 * window overflow/underflow handler or fast exception handler hits
+	 * data breakpoint, in which case save and disable all data
+	 * breakpoints, single-step faulting instruction and restore data
+	 * breakpoints.
+	 */
+1:
+	bbci.l	a0, PS_UM_BIT, 1b	# jump if kernel mode
+
+	rsr	a0, debugcause
+	bbsi.l	a0, DEBUGCAUSE_DBREAK_BIT, .Ldebug_save_dbreak
+
+	.set	_index, 0
+	.rept	XCHAL_NUM_DBREAK
+	l32i	a0, a3, DT_DBREAKC_SAVE + _index * 4
+	wsr	a0, SREG_DBREAKC + _index
+	.set	_index, _index + 1
+	.endr
+
+	l32i	a0, a3, DT_ICOUNT_LEVEL_SAVE
+	wsr	a0, icountlevel
+
+	l32i	a0, a3, DT_ICOUNT_SAVE
+	xsr	a0, icount
+
+	l32i	a0, a3, DT_DEBUG_SAVE
+	xsr	a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
+	rfi	XCHAL_DEBUGLEVEL
+
+.Ldebug_save_dbreak:
+	.set	_index, 0
+	.rept	XCHAL_NUM_DBREAK
 	movi	a0, 0
-	s32i	a1, a2, PT_AREG1
-	s32i	a0, a2, PT_DEPC
-	xsr	a0, depc
-	s32i	a3, a2, PT_AREG3
-	s32i	a0, a2, PT_AREG2
-	mov	a1, a2
-	j	_user_exception
+	xsr	a0, SREG_DBREAKC + _index
+	s32i	a0, a3, DT_DBREAKC_SAVE + _index * 4
+	.set	_index, _index + 1
+	.endr
 
-	/* Debug exception while in exception mode. */
+	movi	a0, XCHAL_EXCM_LEVEL + 1
+	xsr	a0, icountlevel
+	s32i	a0, a3, DT_ICOUNT_LEVEL_SAVE
+
+	movi	a0, 0xfffffffe
+	xsr	a0, icount
+	s32i	a0, a3, DT_ICOUNT_SAVE
+
+	l32i	a0, a3, DT_DEBUG_SAVE
+	xsr	a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
+	rfi	XCHAL_DEBUGLEVEL
+#else
+	/* Debug exception while in exception mode. Should not happen. */
 1:	j	1b	// FIXME!!
+#endif
 
 ENDPROC(debug_exception)
 
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
index 15a461e2a0ed..bc4f4bf05099 100644
--- a/arch/xtensa/kernel/head.S
+++ b/arch/xtensa/kernel/head.S
@@ -128,7 +128,7 @@ ENTRY(_startup)
 	wsr	a0, icountlevel
 
 	.set	_index, 0
-	.rept	XCHAL_NUM_DBREAK - 1
+	.rept	XCHAL_NUM_DBREAK
 	wsr	a0, SREG_DBREAKC + _index
 	.set	_index, _index + 1
 	.endr
@@ -197,11 +197,6 @@ ENTRY(_startup)
 	wsr	a2, ps			# (enable reg-windows; progmode stack)
 	rsync
 
-	/* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/
-
-	movi	a2, debug_exception
-	wsr	a2, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
-
 #ifdef CONFIG_SMP
 	/*
 	 * Notice that we assume with SMP that cores have PRID
@@ -249,7 +244,7 @@ ENTRY(_startup)
 
 	__loopt	a2, a3, a4, 2
 	s32i	a0, a2, 0
-	__endla	a2, a4, 4
+	__endla	a2, a3, 4
 
 #if XCHAL_DCACHE_IS_WRITEBACK
 
diff --git a/arch/xtensa/kernel/hw_breakpoint.c b/arch/xtensa/kernel/hw_breakpoint.c
new file mode 100644
index 000000000000..b35656ab7dbd
--- /dev/null
+++ b/arch/xtensa/kernel/hw_breakpoint.c
@@ -0,0 +1,317 @@
+/*
+ * Xtensa hardware breakpoints/watchpoints handling functions
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2016 Cadence Design Systems Inc.
+ */
+
+#include <linux/hw_breakpoint.h>
+#include <linux/log2.h>
+#include <linux/percpu.h>
+#include <linux/perf_event.h>
+#include <variant/core.h>
+
+/* Breakpoint currently in use for each IBREAKA. */
+static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[XCHAL_NUM_IBREAK]);
+
+/* Watchpoint currently in use for each DBREAKA. */
+static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[XCHAL_NUM_DBREAK]);
+
+int hw_breakpoint_slots(int type)
+{
+	switch (type) {
+	case TYPE_INST:
+		return XCHAL_NUM_IBREAK;
+	case TYPE_DATA:
+		return XCHAL_NUM_DBREAK;
+	default:
+		pr_warn("unknown slot type: %d\n", type);
+		return 0;
+	}
+}
+
+int arch_check_bp_in_kernelspace(struct perf_event *bp)
+{
+	unsigned int len;
+	unsigned long va;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	va = info->address;
+	len = bp->attr.bp_len;
+
+	return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
+}
+
+/*
+ * Construct an arch_hw_breakpoint from a perf_event.
+ */
+static int arch_build_bp_info(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+
+	/* Type */
+	switch (bp->attr.bp_type) {
+	case HW_BREAKPOINT_X:
+		info->type = XTENSA_BREAKPOINT_EXECUTE;
+		break;
+	case HW_BREAKPOINT_R:
+		info->type = XTENSA_BREAKPOINT_LOAD;
+		break;
+	case HW_BREAKPOINT_W:
+		info->type = XTENSA_BREAKPOINT_STORE;
+		break;
+	case HW_BREAKPOINT_RW:
+		info->type = XTENSA_BREAKPOINT_LOAD | XTENSA_BREAKPOINT_STORE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Len */
+	info->len = bp->attr.bp_len;
+	if (info->len < 1 || info->len > 64 || !is_power_of_2(info->len))
+		return -EINVAL;
+
+	/* Address */
+	info->address = bp->attr.bp_addr;
+	if (info->address & (info->len - 1))
+		return -EINVAL;
+
+	return 0;
+}
+
+int arch_validate_hwbkpt_settings(struct perf_event *bp)
+{
+	int ret;
+
+	/* Build the arch_hw_breakpoint. */
+	ret = arch_build_bp_info(bp);
+	return ret;
+}
+
+int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
+				    unsigned long val, void *data)
+{
+	return NOTIFY_DONE;
+}
+
+static void xtensa_wsr(unsigned long v, u8 sr)
+{
+	/* We don't have indexed wsr and creating instruction dynamically
+	 * doesn't seem worth it given how small XCHAL_NUM_IBREAK and
+	 * XCHAL_NUM_DBREAK are. Thus the switch. In case build breaks here
+	 * the switch below needs to be extended.
+	 */
+	BUILD_BUG_ON(XCHAL_NUM_IBREAK > 2);
+	BUILD_BUG_ON(XCHAL_NUM_DBREAK > 2);
+
+	switch (sr) {
+#if XCHAL_NUM_IBREAK > 0
+	case SREG_IBREAKA + 0:
+		WSR(v, SREG_IBREAKA + 0);
+		break;
+#endif
+#if XCHAL_NUM_IBREAK > 1
+	case SREG_IBREAKA + 1:
+		WSR(v, SREG_IBREAKA + 1);
+		break;
+#endif
+
+#if XCHAL_NUM_DBREAK > 0
+	case SREG_DBREAKA + 0:
+		WSR(v, SREG_DBREAKA + 0);
+		break;
+	case SREG_DBREAKC + 0:
+		WSR(v, SREG_DBREAKC + 0);
+		break;
+#endif
+#if XCHAL_NUM_DBREAK > 1
+	case SREG_DBREAKA + 1:
+		WSR(v, SREG_DBREAKA + 1);
+		break;
+
+	case SREG_DBREAKC + 1:
+		WSR(v, SREG_DBREAKC + 1);
+		break;
+#endif
+	}
+}
+
+static int alloc_slot(struct perf_event **slot, size_t n,
+		      struct perf_event *bp)
+{
+	size_t i;
+
+	for (i = 0; i < n; ++i) {
+		if (!slot[i]) {
+			slot[i] = bp;
+			return i;
+		}
+	}
+	return -EBUSY;
+}
+
+static void set_ibreak_regs(int reg, struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned long ibreakenable;
+
+	xtensa_wsr(info->address, SREG_IBREAKA + reg);
+	RSR(ibreakenable, SREG_IBREAKENABLE);
+	WSR(ibreakenable | (1 << reg), SREG_IBREAKENABLE);
+}
+
+static void set_dbreak_regs(int reg, struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	unsigned long dbreakc = DBREAKC_MASK_MASK & -info->len;
+
+	if (info->type & XTENSA_BREAKPOINT_LOAD)
+		dbreakc |= DBREAKC_LOAD_MASK;
+	if (info->type & XTENSA_BREAKPOINT_STORE)
+		dbreakc |= DBREAKC_STOR_MASK;
+
+	xtensa_wsr(info->address, SREG_DBREAKA + reg);
+	xtensa_wsr(dbreakc, SREG_DBREAKC + reg);
+}
+
+int arch_install_hw_breakpoint(struct perf_event *bp)
+{
+	int i;
+
+	if (counter_arch_bp(bp)->type == XTENSA_BREAKPOINT_EXECUTE) {
+		/* Breakpoint */
+		i = alloc_slot(this_cpu_ptr(bp_on_reg), XCHAL_NUM_IBREAK, bp);
+		if (i < 0)
+			return i;
+		set_ibreak_regs(i, bp);
+
+	} else {
+		/* Watchpoint */
+		i = alloc_slot(this_cpu_ptr(wp_on_reg), XCHAL_NUM_DBREAK, bp);
+		if (i < 0)
+			return i;
+		set_dbreak_regs(i, bp);
+	}
+	return 0;
+}
+
+static int free_slot(struct perf_event **slot, size_t n,
+		     struct perf_event *bp)
+{
+	size_t i;
+
+	for (i = 0; i < n; ++i) {
+		if (slot[i] == bp) {
+			slot[i] = NULL;
+			return i;
+		}
+	}
+	return -EBUSY;
+}
+
+void arch_uninstall_hw_breakpoint(struct perf_event *bp)
+{
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
+	int i;
+
+	if (info->type == XTENSA_BREAKPOINT_EXECUTE) {
+		unsigned long ibreakenable;
+
+		/* Breakpoint */
+		i = free_slot(this_cpu_ptr(bp_on_reg), XCHAL_NUM_IBREAK, bp);
+		if (i >= 0) {
+			RSR(ibreakenable, SREG_IBREAKENABLE);
+			WSR(ibreakenable & ~(1 << i), SREG_IBREAKENABLE);
+		}
+	} else {
+		/* Watchpoint */
+		i = free_slot(this_cpu_ptr(wp_on_reg), XCHAL_NUM_DBREAK, bp);
+		if (i >= 0)
+			xtensa_wsr(0, SREG_DBREAKC + i);
+	}
+}
+
+void hw_breakpoint_pmu_read(struct perf_event *bp)
+{
+}
+
+void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	int i;
+	struct thread_struct *t = &tsk->thread;
+
+	for (i = 0; i < XCHAL_NUM_IBREAK; ++i) {
+		if (t->ptrace_bp[i]) {
+			unregister_hw_breakpoint(t->ptrace_bp[i]);
+			t->ptrace_bp[i] = NULL;
+		}
+	}
+	for (i = 0; i < XCHAL_NUM_DBREAK; ++i) {
+		if (t->ptrace_wp[i]) {
+			unregister_hw_breakpoint(t->ptrace_wp[i]);
+			t->ptrace_wp[i] = NULL;
+		}
+	}
+}
+
+/*
+ * Set ptrace breakpoint pointers to zero for this task.
+ * This is required in order to prevent child processes from unregistering
+ * breakpoints held by their parent.
+ */
+void clear_ptrace_hw_breakpoint(struct task_struct *tsk)
+{
+	memset(tsk->thread.ptrace_bp, 0, sizeof(tsk->thread.ptrace_bp));
+	memset(tsk->thread.ptrace_wp, 0, sizeof(tsk->thread.ptrace_wp));
+}
+
+void restore_dbreak(void)
+{
+	int i;
+
+	for (i = 0; i < XCHAL_NUM_DBREAK; ++i) {
+		struct perf_event *bp = this_cpu_ptr(wp_on_reg)[i];
+
+		if (bp)
+			set_dbreak_regs(i, bp);
+	}
+	clear_thread_flag(TIF_DB_DISABLED);
+}
+
+int check_hw_breakpoint(struct pt_regs *regs)
+{
+	if (regs->debugcause & BIT(DEBUGCAUSE_IBREAK_BIT)) {
+		int i;
+		struct perf_event **bp = this_cpu_ptr(bp_on_reg);
+
+		for (i = 0; i < XCHAL_NUM_IBREAK; ++i) {
+			if (bp[i] && !bp[i]->attr.disabled &&
+			    regs->pc == bp[i]->attr.bp_addr)
+				perf_bp_event(bp[i], regs);
+		}
+		return 0;
+	} else if (regs->debugcause & BIT(DEBUGCAUSE_DBREAK_BIT)) {
+		struct perf_event **bp = this_cpu_ptr(wp_on_reg);
+		int dbnum = (regs->debugcause & DEBUGCAUSE_DBNUM_MASK) >>
+			DEBUGCAUSE_DBNUM_SHIFT;
+
+		if (dbnum < XCHAL_NUM_DBREAK && bp[dbnum]) {
+			if (user_mode(regs)) {
+				perf_bp_event(bp[dbnum], regs);
+			} else {
+				set_thread_flag(TIF_DB_DISABLED);
+				xtensa_wsr(0, SREG_DBREAKC + dbnum);
+			}
+		} else {
+			WARN_ONCE(1,
+				  "Wrong/unconfigured DBNUM reported in DEBUGCAUSE: %d\n",
+				  dbnum);
+		}
+		return 0;
+	}
+	return -ENOENT;
+}
diff --git a/arch/xtensa/kernel/mxhead.S b/arch/xtensa/kernel/mxhead.S
index 77a161a112c5..9f3843742726 100644
--- a/arch/xtensa/kernel/mxhead.S
+++ b/arch/xtensa/kernel/mxhead.S
@@ -48,8 +48,6 @@ _SetupOCD:
 	rsync
 
 _SetupMMU:
-	Offset = _SetupMMU - _SecondaryResetVector
-
 #ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
 	initialize_mmu
 #endif
@@ -62,24 +60,3 @@ _SetupMMU:
 	jx	a3
 
 	.end    no-absolute-literals
-
-
-	.section 	.SecondaryResetVector.remapped_text, "ax"
-	.global         _RemappedSecondaryResetVector
-
-	.org 0                                  # Need to do org before literals
-
-_RemappedSecondaryResetVector:
-	.begin  no-absolute-literals
-	.literal_position
-
-	_j      _RemappedSetupMMU
-	. = _RemappedSecondaryResetVector + Offset
-
-_RemappedSetupMMU:
-
-#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
-	initialize_mmu
-#endif
-
-	.end    no-absolute-literals
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index fb75ebf1463a..cd66698348ca 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -15,14 +15,15 @@
  * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
  */
 
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
 #include <linux/gfp.h>
+#include <linux/highmem.h>
+#include <linux/mm.h>
 #include <linux/module.h>
-#include <asm/io.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/types.h>
 #include <asm/cacheflush.h>
+#include <asm/io.h>
 
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction dir)
@@ -47,17 +48,36 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 }
 EXPORT_SYMBOL(dma_cache_sync);
 
+static void do_cache_op(dma_addr_t dma_handle, size_t size,
+			void (*fn)(unsigned long, unsigned long))
+{
+	unsigned long off = dma_handle & (PAGE_SIZE - 1);
+	unsigned long pfn = PFN_DOWN(dma_handle);
+	struct page *page = pfn_to_page(pfn);
+
+	if (!PageHighMem(page))
+		fn((unsigned long)bus_to_virt(dma_handle), size);
+	else
+		while (size > 0) {
+			size_t sz = min_t(size_t, size, PAGE_SIZE - off);
+			void *vaddr = kmap_atomic(page);
+
+			fn((unsigned long)vaddr + off, sz);
+			kunmap_atomic(vaddr);
+			off = 0;
+			++page;
+			size -= sz;
+		}
+}
+
 static void xtensa_sync_single_for_cpu(struct device *dev,
 				       dma_addr_t dma_handle, size_t size,
 				       enum dma_data_direction dir)
 {
-	void *vaddr;
-
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
 	case DMA_FROM_DEVICE:
-		vaddr = bus_to_virt(dma_handle);
-		__invalidate_dcache_range((unsigned long)vaddr, size);
+		do_cache_op(dma_handle, size, __invalidate_dcache_range);
 		break;
 
 	case DMA_NONE:
@@ -73,13 +93,11 @@ static void xtensa_sync_single_for_device(struct device *dev,
 					  dma_addr_t dma_handle, size_t size,
 					  enum dma_data_direction dir)
 {
-	void *vaddr;
-
 	switch (dir) {
 	case DMA_BIDIRECTIONAL:
 	case DMA_TO_DEVICE:
-		vaddr = bus_to_virt(dma_handle);
-		__flush_dcache_range((unsigned long)vaddr, size);
+		if (XCHAL_DCACHE_IS_WRITEBACK)
+			do_cache_op(dma_handle, size, __flush_dcache_range);
 		break;
 
 	case DMA_NONE:
@@ -171,7 +189,6 @@ static dma_addr_t xtensa_map_page(struct device *dev, struct page *page,
 {
 	dma_addr_t dma_handle = page_to_phys(page) + offset;
 
-	BUG_ON(PageHighMem(page));
 	xtensa_sync_single_for_device(dev, dma_handle, size, dir);
 	return dma_handle;
 }
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 1c85323f01d7..5bbfed81c97b 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -24,6 +24,7 @@
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
 #include <linux/elf.h>
+#include <linux/hw_breakpoint.h>
 #include <linux/init.h>
 #include <linux/prctl.h>
 #include <linux/init_task.h>
@@ -43,6 +44,7 @@
 #include <linux/atomic.h>
 #include <asm/asm-offsets.h>
 #include <asm/regs.h>
+#include <asm/hw_breakpoint.h>
 
 extern void ret_from_fork(void);
 extern void ret_from_kernel_thread(void);
@@ -131,6 +133,7 @@ void flush_thread(void)
 	coprocessor_flush_all(ti);
 	coprocessor_release_all(ti);
 #endif
+	flush_ptrace_hw_breakpoint(current);
 }
 
 /*
@@ -273,6 +276,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
 	ti->cpenable = 0;
 #endif
 
+	clear_ptrace_hw_breakpoint(p);
+
 	return 0;
 }
 
diff --git a/arch/xtensa/kernel/ptrace.c b/arch/xtensa/kernel/ptrace.c
index 4d54b481123b..a651f3a628ee 100644
--- a/arch/xtensa/kernel/ptrace.c
+++ b/arch/xtensa/kernel/ptrace.c
@@ -13,21 +13,23 @@
  * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
  */
 
+#include <linux/errno.h>
+#include <linux/hw_breakpoint.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/mm.h>
-#include <linux/errno.h>
+#include <linux/perf_event.h>
 #include <linux/ptrace.h>
-#include <linux/smp.h>
+#include <linux/sched.h>
 #include <linux/security.h>
 #include <linux/signal.h>
+#include <linux/smp.h>
 
-#include <asm/pgtable.h>
+#include <asm/coprocessor.h>
+#include <asm/elf.h>
 #include <asm/page.h>
-#include <asm/uaccess.h>
+#include <asm/pgtable.h>
 #include <asm/ptrace.h>
-#include <asm/elf.h>
-#include <asm/coprocessor.h>
+#include <asm/uaccess.h>
 
 
 void user_enable_single_step(struct task_struct *child)
@@ -267,6 +269,146 @@ int ptrace_pokeusr(struct task_struct *child, long regno, long val)
 	return 0;
 }
 
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+static void ptrace_hbptriggered(struct perf_event *bp,
+				struct perf_sample_data *data,
+				struct pt_regs *regs)
+{
+	int i;
+	siginfo_t info;
+	struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
+
+	if (bp->attr.bp_type & HW_BREAKPOINT_X) {
+		for (i = 0; i < XCHAL_NUM_IBREAK; ++i)
+			if (current->thread.ptrace_bp[i] == bp)
+				break;
+		i <<= 1;
+	} else {
+		for (i = 0; i < XCHAL_NUM_DBREAK; ++i)
+			if (current->thread.ptrace_wp[i] == bp)
+				break;
+		i = (i << 1) | 1;
+	}
+
+	info.si_signo = SIGTRAP;
+	info.si_errno = i;
+	info.si_code = TRAP_HWBKPT;
+	info.si_addr = (void __user *)bkpt->address;
+
+	force_sig_info(SIGTRAP, &info, current);
+}
+
+static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type)
+{
+	struct perf_event_attr attr;
+
+	ptrace_breakpoint_init(&attr);
+
+	/* Initialise fields to sane defaults. */
+	attr.bp_addr	= 0;
+	attr.bp_len	= 1;
+	attr.bp_type	= type;
+	attr.disabled	= 1;
+
+	return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, NULL,
+					   tsk);
+}
+
+/*
+ * Address bit 0 choose instruction (0) or data (1) break register, bits
+ * 31..1 are the register number.
+ * Both PTRACE_GETHBPREGS and PTRACE_SETHBPREGS transfer two 32-bit words:
+ * address (0) and control (1).
+ * Instruction breakpoint contorl word is 0 to clear breakpoint, 1 to set.
+ * Data breakpoint control word bit 31 is 'trigger on store', bit 30 is
+ * 'trigger on load, bits 29..0 are length. Length 0 is used to clear a
+ * breakpoint. To set a breakpoint length must be a power of 2 in the range
+ * 1..64 and the address must be length-aligned.
+ */
+
+static long ptrace_gethbpregs(struct task_struct *child, long addr,
+			      long __user *datap)
+{
+	struct perf_event *bp;
+	u32 user_data[2] = {0};
+	bool dbreak = addr & 1;
+	unsigned idx = addr >> 1;
+
+	if ((!dbreak && idx >= XCHAL_NUM_IBREAK) ||
+	    (dbreak && idx >= XCHAL_NUM_DBREAK))
+		return -EINVAL;
+
+	if (dbreak)
+		bp = child->thread.ptrace_wp[idx];
+	else
+		bp = child->thread.ptrace_bp[idx];
+
+	if (bp) {
+		user_data[0] = bp->attr.bp_addr;
+		user_data[1] = bp->attr.disabled ? 0 : bp->attr.bp_len;
+		if (dbreak) {
+			if (bp->attr.bp_type & HW_BREAKPOINT_R)
+				user_data[1] |= DBREAKC_LOAD_MASK;
+			if (bp->attr.bp_type & HW_BREAKPOINT_W)
+				user_data[1] |= DBREAKC_STOR_MASK;
+		}
+	}
+
+	if (copy_to_user(datap, user_data, sizeof(user_data)))
+		return -EFAULT;
+
+	return 0;
+}
+
+static long ptrace_sethbpregs(struct task_struct *child, long addr,
+			      long __user *datap)
+{
+	struct perf_event *bp;
+	struct perf_event_attr attr;
+	u32 user_data[2];
+	bool dbreak = addr & 1;
+	unsigned idx = addr >> 1;
+	int bp_type = 0;
+
+	if ((!dbreak && idx >= XCHAL_NUM_IBREAK) ||
+	    (dbreak && idx >= XCHAL_NUM_DBREAK))
+		return -EINVAL;
+
+	if (copy_from_user(user_data, datap, sizeof(user_data)))
+		return -EFAULT;
+
+	if (dbreak) {
+		bp = child->thread.ptrace_wp[idx];
+		if (user_data[1] & DBREAKC_LOAD_MASK)
+			bp_type |= HW_BREAKPOINT_R;
+		if (user_data[1] & DBREAKC_STOR_MASK)
+			bp_type |= HW_BREAKPOINT_W;
+	} else {
+		bp = child->thread.ptrace_bp[idx];
+		bp_type = HW_BREAKPOINT_X;
+	}
+
+	if (!bp) {
+		bp = ptrace_hbp_create(child,
+				       bp_type ? bp_type : HW_BREAKPOINT_RW);
+		if (IS_ERR(bp))
+			return PTR_ERR(bp);
+		if (dbreak)
+			child->thread.ptrace_wp[idx] = bp;
+		else
+			child->thread.ptrace_bp[idx] = bp;
+	}
+
+	attr = bp->attr;
+	attr.bp_addr = user_data[0];
+	attr.bp_len = user_data[1] & ~(DBREAKC_LOAD_MASK | DBREAKC_STOR_MASK);
+	attr.bp_type = bp_type;
+	attr.disabled = !attr.bp_len;
+
+	return modify_user_hw_breakpoint(bp, &attr);
+}
+#endif
+
 long arch_ptrace(struct task_struct *child, long request,
 		 unsigned long addr, unsigned long data)
 {
@@ -307,7 +449,15 @@ long arch_ptrace(struct task_struct *child, long request,
 	case PTRACE_SETXTREGS:
 		ret = ptrace_setxregs(child, datap);
 		break;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	case PTRACE_GETHBPREGS:
+		ret = ptrace_gethbpregs(child, addr, datap);
+		break;
 
+	case PTRACE_SETHBPREGS:
+		ret = ptrace_sethbpregs(child, addr, datap);
+		break;
+#endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 28fc57ef5b86..9735691f37f1 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -190,7 +190,7 @@ static int __init parse_bootparam(const bp_tag_t* tag)
 #ifdef CONFIG_OF
 bool __initdata dt_memory_scan = false;
 
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+#if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
 EXPORT_SYMBOL(xtensa_kio_paddr);
 
@@ -334,7 +334,10 @@ extern char _Level5InterruptVector_text_end;
 extern char _Level6InterruptVector_text_start;
 extern char _Level6InterruptVector_text_end;
 #endif
-
+#ifdef CONFIG_SMP
+extern char _SecondaryResetVector_text_start;
+extern char _SecondaryResetVector_text_end;
+#endif
 
 
 #ifdef CONFIG_S32C1I_SELFTEST
@@ -506,6 +509,10 @@ void __init setup_arch(char **cmdline_p)
 		    __pa(&_Level6InterruptVector_text_end), 0);
 #endif
 
+#ifdef CONFIG_SMP
+	mem_reserve(__pa(&_SecondaryResetVector_text_start),
+		    __pa(&_SecondaryResetVector_text_end), 0);
+#endif
 	parse_early_param();
 	bootmem_init();
 
diff --git a/arch/xtensa/kernel/smp.c b/arch/xtensa/kernel/smp.c
index 4d02e38514f5..fc4ad21a5ed4 100644
--- a/arch/xtensa/kernel/smp.c
+++ b/arch/xtensa/kernel/smp.c
@@ -157,7 +157,7 @@ void secondary_start_kernel(void)
 
 	complete(&cpu_running);
 
-	cpu_startup_entry(CPUHP_ONLINE);
+	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
 static void mx_cpu_start(void *p)
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 42d441f7898b..d02fc304b31c 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -39,11 +39,7 @@
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/traps.h>
-
-#ifdef CONFIG_KGDB
-extern int gdb_enter;
-extern int return_from_debug_flag;
-#endif
+#include <asm/hw_breakpoint.h>
 
 /*
  * Machine specific interrupt handlers
@@ -162,6 +158,8 @@ COPROCESSOR(7),
 
 DEFINE_PER_CPU(unsigned long, exc_table[EXC_TABLE_SIZE/4]);
 
+DEFINE_PER_CPU(struct debug_table, debug_table);
+
 void die(const char*, struct pt_regs*, long);
 
 static inline void
@@ -205,6 +203,32 @@ extern void do_IRQ(int, struct pt_regs *);
 
 #if XTENSA_FAKE_NMI
 
+#define IS_POW2(v) (((v) & ((v) - 1)) == 0)
+
+#if !(PROFILING_INTLEVEL == XCHAL_EXCM_LEVEL && \
+      IS_POW2(XTENSA_INTLEVEL_MASK(PROFILING_INTLEVEL)))
+#warning "Fake NMI is requested for PMM, but there are other IRQs at or above its level."
+#warning "Fake NMI will be used, but there will be a bugcheck if one of those IRQs fire."
+
+static inline void check_valid_nmi(void)
+{
+	unsigned intread = get_sr(interrupt);
+	unsigned intenable = get_sr(intenable);
+
+	BUG_ON(intread & intenable &
+	       ~(XTENSA_INTLEVEL_ANDBELOW_MASK(PROFILING_INTLEVEL) ^
+		 XTENSA_INTLEVEL_MASK(PROFILING_INTLEVEL) ^
+		 BIT(XCHAL_PROFILING_INTERRUPT)));
+}
+
+#else
+
+static inline void check_valid_nmi(void)
+{
+}
+
+#endif
+
 irqreturn_t xtensa_pmu_irq_handler(int irq, void *dev_id);
 
 DEFINE_PER_CPU(unsigned long, nmi_count);
@@ -219,6 +243,7 @@ void do_nmi(struct pt_regs *regs)
 	old_regs = set_irq_regs(regs);
 	nmi_enter();
 	++*this_cpu_ptr(&nmi_count);
+	check_valid_nmi();
 	xtensa_pmu_irq_handler(0, NULL);
 	nmi_exit();
 	set_irq_regs(old_regs);
@@ -314,23 +339,22 @@ do_unaligned_user (struct pt_regs *regs)
 }
 #endif
 
+/* Handle debug events.
+ * When CONFIG_HAVE_HW_BREAKPOINT is on this handler is called with
+ * preemption disabled to avoid rescheduling and keep mapping of hardware
+ * breakpoint structures to debug registers intact, so that
+ * DEBUGCAUSE.DBNUM could be used in case of data breakpoint hit.
+ */
 void
 do_debug(struct pt_regs *regs)
 {
-#ifdef CONFIG_KGDB
-	/* If remote debugging is configured AND enabled, we give control to
-	 * kgdb.  Otherwise, we fall through, perhaps giving control to the
-	 * native debugger.
-	 */
-
-	if (gdb_enter) {
-		extern void gdb_handle_exception(struct pt_regs *);
-		gdb_handle_exception(regs);
-		return_from_debug_flag = 1;
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+	int ret = check_hw_breakpoint(regs);
+
+	preempt_enable();
+	if (ret == 0)
 		return;
-	}
 #endif
-
 	__die_if_kernel("Breakpoint in kernel", regs, SIGKILL);
 
 	/* If in user mode, send SIGTRAP signal to current process */
@@ -364,6 +388,15 @@ static void trap_init_excsave(void)
 	__asm__ __volatile__("wsr  %0, excsave1\n" : : "a" (excsave1));
 }
 
+static void trap_init_debug(void)
+{
+	unsigned long debugsave = (unsigned long)this_cpu_ptr(&debug_table);
+
+	this_cpu_ptr(&debug_table)->debug_exception = debug_exception;
+	__asm__ __volatile__("wsr %0, excsave" __stringify(XCHAL_DEBUGLEVEL)
+			     :: "a"(debugsave));
+}
+
 /*
  * Initialize dispatch tables.
  *
@@ -407,12 +440,14 @@ void __init trap_init(void)
 
 	/* Initialize EXCSAVE_1 to hold the address of the exception table. */
 	trap_init_excsave();
+	trap_init_debug();
 }
 
 #ifdef CONFIG_SMP
 void secondary_trap_init(void)
 {
 	trap_init_excsave();
+	trap_init_debug();
 }
 #endif
 
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index abcdb527f18a..332e9d635fb6 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -478,6 +478,9 @@ _DoubleExceptionVector_handle_exception:
 
 ENDPROC(_DoubleExceptionVector)
 
+	.end literal_prefix
+
+	.text
 /*
  * Fixup handler for TLB miss in double exception handler for window owerflow.
  * We get here with windowbase set to the window that was being spilled and
@@ -587,7 +590,6 @@ ENTRY(window_overflow_restore_a0_fixup)
 
 ENDPROC(window_overflow_restore_a0_fixup)
 
-	.end literal_prefix
 /*
  * Debug interrupt vector
  *
@@ -599,7 +601,9 @@ ENDPROC(window_overflow_restore_a0_fixup)
 
 ENTRY(_DebugInterruptVector)
 
-	xsr	a0, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
+	xsr	a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
+	s32i	a0, a3, DT_DEBUG_SAVE
+	l32i	a0, a3, DT_DEBUG_EXCEPTION
 	jx	a0
 
 ENDPROC(_DebugInterruptVector)
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index fc1bc2ba8d5d..c417cbe4ec87 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -166,8 +166,6 @@ SECTIONS
     RELOCATE_ENTRY(_DebugInterruptVector_text,
 		   .DebugInterruptVector.text);
 #if defined(CONFIG_SMP)
-    RELOCATE_ENTRY(_SecondaryResetVector_literal,
-		   .SecondaryResetVector.literal);
     RELOCATE_ENTRY(_SecondaryResetVector_text,
 		   .SecondaryResetVector.text);
 #endif
@@ -282,17 +280,11 @@ SECTIONS
 
 #if defined(CONFIG_SMP)
 
-  SECTION_VECTOR (_SecondaryResetVector_literal,
-		  .SecondaryResetVector.literal,
-		  RESET_VECTOR1_VADDR - 4,
-		  SIZEOF(.DoubleExceptionVector.text),
-		  .DoubleExceptionVector.text)
-
   SECTION_VECTOR (_SecondaryResetVector_text,
 		  .SecondaryResetVector.text,
 		  RESET_VECTOR1_VADDR,
-		  4,
-		  .SecondaryResetVector.literal)
+		  SIZEOF(.DoubleExceptionVector.text),
+		  .DoubleExceptionVector.text)
 
   . = LOADADDR(.SecondaryResetVector.text)+SIZEOF(.SecondaryResetVector.text);
 
@@ -306,31 +298,6 @@ SECTIONS
 
   _end = .;
 
-  /* only used by the boot loader  */
-
-  . = ALIGN(0x10);
-  .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) }
-
-  .ResetVector.text RESET_VECTOR_VADDR :
-  {
-    *(.ResetVector.text)
-  }
-
-
-  /*
-   * This is a remapped copy of the Secondary Reset Vector Code.
-   * It keeps gdb in sync with the PC after switching
-   * to the temporary mapping used while setting up
-   * the V2 MMU mappings for Linux.
-   *
-   * Only debug information about this section is put in the kernel image.
-   */
-  .SecondaryResetVector.remapped_text 0x46000000 (INFO):
-  {
-	*(.SecondaryResetVector.remapped_text)
-  }
-
-
   .xt.lit : { *(.xt.lit) }
   .xt.prop : { *(.xt.prop) }
 
diff --git a/arch/xtensa/lib/usercopy.S b/arch/xtensa/lib/usercopy.S
index ace1892a875e..7ea4dd68893e 100644
--- a/arch/xtensa/lib/usercopy.S
+++ b/arch/xtensa/lib/usercopy.S
@@ -222,8 +222,8 @@ __xtensa_copy_user:
 	loopnez	a7, .Loop2done
 #else /* !XCHAL_HAVE_LOOPS */
 	beqz	a7, .Loop2done
-	slli	a10, a7, 4
-	add	a10, a10, a3	# a10 = end of last 16B source chunk
+	slli	a12, a7, 4
+	add	a12, a12, a3	# a12 = end of last 16B source chunk
 #endif /* !XCHAL_HAVE_LOOPS */
 .Loop2:
 	EX(l32i, a7, a3,  4, l_fixup)
@@ -241,7 +241,7 @@ __xtensa_copy_user:
 	EX(s32i, a9, a5, 12, s_fixup)
 	addi	a5, a5, 16
 #if !XCHAL_HAVE_LOOPS
-	blt	a3, a10, .Loop2
+	blt	a3, a12, .Loop2
 #endif /* !XCHAL_HAVE_LOOPS */
 .Loop2done:
 	bbci.l	a4, 3, .L12
diff --git a/arch/xtensa/mm/Makefile b/arch/xtensa/mm/Makefile
index e601e2fbe8e6..0b3d296a016a 100644
--- a/arch/xtensa/mm/Makefile
+++ b/arch/xtensa/mm/Makefile
@@ -3,5 +3,5 @@
 #
 
 obj-y			:= init.o misc.o
-obj-$(CONFIG_MMU)	+= cache.o fault.o mmu.o tlb.o
+obj-$(CONFIG_MMU)	+= cache.o fault.o ioremap.o mmu.o tlb.o
 obj-$(CONFIG_HIGHMEM)	+= highmem.o
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index d75aa1476da7..1a804a2f9a5b 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -97,11 +97,11 @@ void clear_user_highpage(struct page *page, unsigned long vaddr)
 	unsigned long paddr;
 	void *kvaddr = coherent_kvaddr(page, TLBTEMP_BASE_1, vaddr, &paddr);
 
-	pagefault_disable();
+	preempt_disable();
 	kmap_invalidate_coherent(page, vaddr);
 	set_bit(PG_arch_1, &page->flags);
 	clear_page_alias(kvaddr, paddr);
-	pagefault_enable();
+	preempt_enable();
 }
 
 void copy_user_highpage(struct page *dst, struct page *src,
@@ -113,11 +113,11 @@ void copy_user_highpage(struct page *dst, struct page *src,
 	void *src_vaddr = coherent_kvaddr(src, TLBTEMP_BASE_2, vaddr,
 					  &src_paddr);
 
-	pagefault_disable();
+	preempt_disable();
 	kmap_invalidate_coherent(dst, vaddr);
 	set_bit(PG_arch_1, &dst->flags);
 	copy_page_alias(dst_vaddr, src_vaddr, dst_paddr, src_paddr);
-	pagefault_enable();
+	preempt_enable();
 }
 
 #endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index c9784c1b18d8..7f4a1fdb1502 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -146,7 +146,7 @@ good_area:
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	if (flags & VM_FAULT_MAJOR)
 		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-	else if (flags & VM_FAULT_MINOR)
+	else
 		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
 
 	return;
diff --git a/arch/xtensa/mm/ioremap.c b/arch/xtensa/mm/ioremap.c
new file mode 100644
index 000000000000..d89c3c5fd962
--- /dev/null
+++ b/arch/xtensa/mm/ioremap.c
@@ -0,0 +1,68 @@
+/*
+ * ioremap implementation.
+ *
+ * Copyright (C) 2015 Cadence Design Systems Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+
+static void __iomem *xtensa_ioremap(unsigned long paddr, unsigned long size,
+				    pgprot_t prot)
+{
+	unsigned long offset = paddr & ~PAGE_MASK;
+	unsigned long pfn = __phys_to_pfn(paddr);
+	struct vm_struct *area;
+	unsigned long vaddr;
+	int err;
+
+	paddr &= PAGE_MASK;
+
+	WARN_ON(pfn_valid(pfn));
+
+	size = PAGE_ALIGN(offset + size);
+
+	area = get_vm_area(size, VM_IOREMAP);
+	if (!area)
+		return NULL;
+
+	vaddr = (unsigned long)area->addr;
+	area->phys_addr = paddr;
+
+	err = ioremap_page_range(vaddr, vaddr + size, paddr, prot);
+
+	if (err) {
+		vunmap((void *)vaddr);
+		return NULL;
+	}
+
+	flush_cache_vmap(vaddr, vaddr + size);
+	return (void __iomem *)(offset + vaddr);
+}
+
+void __iomem *xtensa_ioremap_nocache(unsigned long addr, unsigned long size)
+{
+	return xtensa_ioremap(addr, size, pgprot_noncached(PAGE_KERNEL));
+}
+EXPORT_SYMBOL(xtensa_ioremap_nocache);
+
+void __iomem *xtensa_ioremap_cache(unsigned long addr, unsigned long size)
+{
+	return xtensa_ioremap(addr, size, PAGE_KERNEL);
+}
+EXPORT_SYMBOL(xtensa_ioremap_cache);
+
+void xtensa_iounmap(volatile void __iomem *io_addr)
+{
+	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
+
+	vunmap(addr);
+}
+EXPORT_SYMBOL(xtensa_iounmap);
diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c
index 5ece856c5725..35c822286bbe 100644
--- a/arch/xtensa/mm/tlb.c
+++ b/arch/xtensa/mm/tlb.c
@@ -245,7 +245,7 @@ static int check_tlb_entry(unsigned w, unsigned e, bool dtlb)
 						page_mapcount(p));
 				if (!page_count(p))
 					rc |= TLB_INSANE;
-				else if (page_mapped(p))
+				else if (page_mapcount(p))
 					rc |= TLB_SUSPICIOUS;
 			} else {
 				rc |= TLB_INSANE;
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 70cb408bc20d..c68f1e6158aa 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -28,10 +28,6 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 
-#ifdef SERIAL_INLINE
-#define _INLINE_ inline
-#endif
-
 #define SERIAL_MAX_NUM_LINES 1
 #define SERIAL_TIMER_VALUE (HZ / 10)
 
@@ -100,21 +96,23 @@ static void rs_poll(unsigned long priv)
 {
 	struct tty_port *port = (struct tty_port *)priv;
 	int i = 0;
+	int rd = 1;
 	unsigned char c;
 
 	spin_lock(&timer_lock);
 
 	while (simc_poll(0)) {
-		simc_read(0, &c, 1);
+		rd = simc_read(0, &c, 1);
+		if (rd <= 0)
+			break;
 		tty_insert_flip_char(port, c, TTY_NORMAL);
 		i++;
 	}
 
 	if (i)
 		tty_flip_buffer_push(port);
-
-
-	mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
+	if (rd)
+		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
 	spin_unlock(&timer_lock);
 }
 
diff --git a/arch/xtensa/platforms/iss/setup.c b/arch/xtensa/platforms/iss/setup.c
index da7d18240866..391820539f0a 100644
--- a/arch/xtensa/platforms/iss/setup.c
+++ b/arch/xtensa/platforms/iss/setup.c
@@ -61,7 +61,9 @@ void platform_restart(void)
 #if XCHAL_NUM_IBREAK > 0
 			     "wsr	a2, ibreakenable\n\t"
 #endif
+#if XCHAL_HAVE_LOOPS
 			     "wsr	a2, lcount\n\t"
+#endif
 			     "movi	a2, 0x1f\n\t"
 			     "wsr	a2, ps\n\t"
 			     "isync\n\t"
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
index fa84ca990caa..f58a4e6472cb 100644
--- a/arch/xtensa/platforms/iss/simdisk.c
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -101,7 +101,7 @@ static void simdisk_transfer(struct simdisk *dev, unsigned long sector,
 	spin_unlock(&dev->lock);
 }
 
-static void simdisk_make_request(struct request_queue *q, struct bio *bio)
+static blk_qc_t simdisk_make_request(struct request_queue *q, struct bio *bio)
 {
 	struct simdisk *dev = q->queuedata;
 	struct bio_vec bvec;
@@ -119,6 +119,7 @@ static void simdisk_make_request(struct request_queue *q, struct bio *bio)
 	}
 
 	bio_endio(bio);
+	return BLK_QC_T_NONE;
 }
 
 static int simdisk_open(struct block_device *bdev, fmode_t mode)
@@ -226,16 +227,12 @@ static ssize_t proc_read_simdisk(struct file *file, char __user *buf,
 static ssize_t proc_write_simdisk(struct file *file, const char __user *buf,
 			size_t count, loff_t *ppos)
 {
-	char *tmp = kmalloc(count + 1, GFP_KERNEL);
+	char *tmp = memdup_user_nul(buf, count);
 	struct simdisk *dev = PDE_DATA(file_inode(file));
 	int err;
 
-	if (tmp == NULL)
-		return -ENOMEM;
-	if (copy_from_user(tmp, buf, count)) {
-		err = -EFAULT;
-		goto out_free;
-	}
+	if (IS_ERR(tmp))
+		return PTR_ERR(tmp);
 
 	err = simdisk_detach(dev);
 	if (err != 0)
@@ -243,8 +240,6 @@ static ssize_t proc_write_simdisk(struct file *file, const char __user *buf,
 
 	if (count > 0 && tmp[count - 1] == '\n')
 		tmp[count - 1] = 0;
-	else
-		tmp[count] = 0;
 
 	if (tmp[0])
 		err = simdisk_attach(dev, tmp);
diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c
index b90555cb8089..5f4bd71971d6 100644
--- a/arch/xtensa/platforms/xt2000/setup.c
+++ b/arch/xtensa/platforms/xt2000/setup.c
@@ -72,7 +72,9 @@ void platform_restart(void)
 #if XCHAL_NUM_IBREAK > 0
 			      "wsr	a2, ibreakenable\n\t"
 #endif
+#if XCHAL_HAVE_LOOPS
 			      "wsr	a2, lcount\n\t"
+#endif
 			      "movi	a2, 0x1f\n\t"
 			      "wsr	a2, ps\n\t"
 			      "isync\n\t"
@@ -111,7 +113,7 @@ void platform_heartbeat(void)
 }
 
 //#define RS_TABLE_SIZE 2
-//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
+//#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF|UPF_SKIP_TEST)
 
 #define _SERIAL_PORT(_base,_irq)					\
 {									\
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
index 0a55bb9c5420..dbeea2b440a1 100644
--- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
+++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
@@ -12,13 +12,15 @@
  * This file contains the hardware configuration of the XTAVNET boards.
  */
 
+#include <asm/types.h>
+
 #ifndef __XTENSA_XTAVNET_HARDWARE_H
 #define __XTENSA_XTAVNET_HARDWARE_H
 
 /* Memory configuration. */
 
-#define PLATFORM_DEFAULT_MEM_START CONFIG_DEFAULT_MEM_START
-#define PLATFORM_DEFAULT_MEM_SIZE  CONFIG_DEFAULT_MEM_SIZE
+#define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START)
+#define PLATFORM_DEFAULT_MEM_SIZE  __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE)
 
 /* Interrupt configuration. */
 
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index b4cf70e535ab..b509d1f55ed5 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -63,7 +63,9 @@ void platform_restart(void)
 #if XCHAL_NUM_IBREAK > 0
 			      "wsr	a2, ibreakenable\n\t"
 #endif
+#if XCHAL_HAVE_LOOPS
 			      "wsr	a2, lcount\n\t"
+#endif
 			      "movi	a2, 0x1f\n\t"
 			      "wsr	a2, ps\n\t"
 			      "isync\n\t"
@@ -221,6 +223,7 @@ static struct ethoc_platform_data ethoc_pdata = {
 	 */
 	.hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 },
 	.phy_id = -1,
+	.big_endian = XCHAL_HAVE_BE,
 };
 
 static struct platform_device ethoc_device = {
@@ -281,7 +284,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.irq		= DUART16552_INTNUM,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
 				  UPF_IOREMAP,
-		.iotype		= UPIO_MEM32,
+		.iotype		= XCHAL_HAVE_BE ? UPIO_MEM32BE : UPIO_MEM32,
 		.regshift	= 2,
 		.uartclk	= 0,    /* set in xtavnet_init() */
 	},
diff --git a/arch/xtensa/variants/de212/include/variant/core.h b/arch/xtensa/variants/de212/include/variant/core.h
new file mode 100644
index 000000000000..59e91e47ef3c
--- /dev/null
+++ b/arch/xtensa/variants/de212/include/variant/core.h
@@ -0,0 +1,594 @@
+/* 
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ *				processor CORE configuration
+ *
+ *  See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+   Copyright (c) 1999-2015 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	3	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_LOOP_BUFFER_SIZE		0	/* zero-ov. loop instr buffer size */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_DEPBITS		0	/* DEPBITS instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		0	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	0	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS		1	/* WER/RER instructions */
+#define XCHAL_HAVE_MX			0	/* MX core (Tensilica internal) */
+#define XCHAL_HAVE_MP_INTERRUPTS	0	/* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL		0	/* core RunStall control port */
+#define XCHAL_HAVE_PSO			0	/* Power Shut-Off */
+#define XCHAL_HAVE_PSO_CDM		0	/* core/debug/mem pwr domains */
+#define XCHAL_HAVE_PSO_FULL_RETENTION	0	/* all regs preserved on PSO */
+#define XCHAL_HAVE_THREADPTR		0	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		0	/* boolean registers */
+#define XCHAL_HAVE_CP			0	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			0	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+
+#define XCHAL_HAVE_FUSION		 0	/* Fusion*/
+#define XCHAL_HAVE_FUSION_FP	 0	        /* Fusion FP option */
+#define XCHAL_HAVE_FUSION_LOW_POWER 0	/* Fusion Low Power option */
+#define XCHAL_HAVE_FUSION_AES	 0	        /* Fusion BLE/Wifi AES-128 CCM option */
+#define XCHAL_HAVE_FUSION_CONVENC	 0       /* Fusion Conv Encode option */
+#define XCHAL_HAVE_FUSION_LFSR_CRC	 0	/* Fusion LFSR-CRC option */
+#define XCHAL_HAVE_FUSION_BITOPS	 0	/* Fusion Bit Operations Support option */
+#define XCHAL_HAVE_FUSION_AVS	 0	/* Fusion AVS option */
+#define XCHAL_HAVE_FUSION_16BIT_BASEBAND	 0	/* Fusion 16-bit Baseband option */
+#define XCHAL_HAVE_HIFIPRO		0	/* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4		0	/* HiFi4 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4_VFPU		0	/* HiFi4 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI3		0	/* HiFi3 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3_VFPU		0	/* HiFi3 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2EP		0	/* HiFi2EP */
+#define XCHAL_HAVE_HIFI_MINI		0	
+
+
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector or user floating-point pkg */
+#define XCHAL_HAVE_USER_DPFPU         0       /* user DP floating-point pkg */
+#define XCHAL_HAVE_USER_SPFPU         0       /* user DP floating-point pkg */
+#define XCHAL_HAVE_FP                 0      /* single prec floating point */
+#define XCHAL_HAVE_FP_DIV             0  /* FP with DIV instructions */
+#define XCHAL_HAVE_FP_RECIP           0        /* FP with RECIP instructions */
+#define XCHAL_HAVE_FP_SQRT            0 /* FP with SQRT instructions */
+#define XCHAL_HAVE_FP_RSQRT           0        /* FP with RSQRT instructions */
+#define XCHAL_HAVE_DFP                        0     /* double precision FP pkg */
+#define XCHAL_HAVE_DFP_DIV            0 /* DFP with DIV instructions */
+#define XCHAL_HAVE_DFP_RECIP          0       /* DFP with RECIP instructions*/
+#define XCHAL_HAVE_DFP_SQRT           0        /* DFP with SQRT instructions */
+#define XCHAL_HAVE_DFP_RSQRT          0       /* DFP with RSQRT instructions*/
+#define XCHAL_HAVE_DFP_ACCEL		0	/* double precision FP acceleration pkg */
+#define XCHAL_HAVE_DFP_accel		XCHAL_HAVE_DFP_ACCEL				/* for backward compatibility */
+
+#define XCHAL_HAVE_DFPU_SINGLE_ONLY    0                 	/* DFPU Coprocessor, single precision only */
+#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE  0               	/* DFPU Coprocessor, single and double precision */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_PDX4		        0	/* PDX4 */
+#define XCHAL_HAVE_CONNXD2		0	/* ConnX D2 pkg */
+#define XCHAL_HAVE_CONNXD2_DUALLSFLIX   0	/* ConnX D2 & Dual LoadStore Flix */
+#define XCHAL_HAVE_BBE16		0	/* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT		0	/* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV		0	/* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD	0	/* BBE16 & despread */
+#define XCHAL_HAVE_BBENEP		0	/* ConnX BBENEP pkgs */
+#define XCHAL_HAVE_BSP3			0	/* ConnX BSP3 pkg */
+#define XCHAL_HAVE_BSP3_TRANSPOSE	0	/* BSP3 & transpose32x32 */
+#define XCHAL_HAVE_SSP16		0	/* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI	0	/* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16		0	/* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16		0	/* ConnX BBP16 pkg */
+#define XCHAL_HAVE_FLIX3		0	/* basic 3-way FLIX option */
+#define XCHAL_HAVE_GRIVPEP              0   /*  GRIVPEP is General Release of IVPEP */
+#define XCHAL_HAVE_GRIVPEP_HISTOGRAM    0   /* Histogram option on GRIVPEP */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_LOADSTORE_UNITS	1	/* load/store units */
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		4	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		4	/* data width in bytes */
+#define XCHAL_DATA_PIPE_DELAY		1	/* d-side pipeline delay
+						   (1 = 5-stage, 2 = 7-stage) */
+#define XCHAL_CLOCK_GATING_GLOBAL	0	/* global clock gating */
+#define XCHAL_CLOCK_GATING_FUNCUNIT	0	/* funct. unit clock gating */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW		0	/* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW	0	/* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION		1100002	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"de212"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x0005A985	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC283DFFE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x1C85A985	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX6.0.2"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2600	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		2	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		260002	/* major*100+minor */
+#define XCHAL_HW_REL_LX6		1
+#define XCHAL_HW_REL_LX6_0		1
+#define XCHAL_HW_REL_LX6_0_2		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2600	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	2	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		260002	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2600	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	2	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		260002	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		8192	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		8192	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT	0	/* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH		0	/* PREFCTL register */
+#define XCHAL_HAVE_PREFETCH_L1		0	/* prefetch to L1 dcache */
+#define XCHAL_PREFETCH_CASTOUT_LINES	0	/* dcache pref. castout bufsz */
+#define XCHAL_PREFETCH_ENTRIES		0	/* cache prefetch entries */
+#define XCHAL_PREFETCH_BLOCK_ENTRIES	0	/* prefetch block streams */
+#define XCHAL_HAVE_CACHE_BLOCKOPS	0	/* block prefetch for caches */
+#define XCHAL_HAVE_ICACHE_TEST		1	/* Icache test instructions */
+#define XCHAL_HAVE_DCACHE_TEST		1	/* Dcache test instructions */
+#define XCHAL_HAVE_ICACHE_DYN_WAYS	0	/* Icache dynamic way support */
+#define XCHAL_HAVE_DCACHE_DYN_WAYS	0	/* Dcache dynamic way support */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		7
+#define XCHAL_DCACHE_SETWIDTH		7
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		2
+#define XCHAL_DCACHE_WAYS		2
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Cache access size in bytes (affects operation of SICW instruction):  */
+#define XCHAL_ICACHE_ACCESS_SIZE	4
+#define XCHAL_DCACHE_ACCESS_SIZE	4
+
+#define XCHAL_DCACHE_BANKS		1	/* number of banks */
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+/*  Whether MEMCTL register has anything useful  */
+#define XCHAL_USE_MEMCTL		(((XCHAL_LOOP_BUFFER_SIZE > 0)	||	\
+					   XCHAL_DCACHE_IS_COHERENT	||	\
+					   XCHAL_HAVE_ICACHE_DYN_WAYS	||	\
+					   XCHAL_HAVE_DCACHE_DYN_WAYS)	&&	\
+					   (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0))
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		1	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		1	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			1	/* number of core XLMI ports */
+
+/*  Instruction RAM 0:  */
+#define XCHAL_INSTRAM0_VADDR		0x40000000	/* virtual address */
+#define XCHAL_INSTRAM0_PADDR		0x40000000	/* physical address */
+#define XCHAL_INSTRAM0_SIZE		131072	/* size in bytes */
+#define XCHAL_INSTRAM0_ECC_PARITY	0	/* ECC/parity type, 0=none */
+
+/*  Data RAM 0:  */
+#define XCHAL_DATARAM0_VADDR		0x3FFE0000	/* virtual address */
+#define XCHAL_DATARAM0_PADDR		0x3FFE0000	/* physical address */
+#define XCHAL_DATARAM0_SIZE		131072	/* size in bytes */
+#define XCHAL_DATARAM0_ECC_PARITY	0	/* ECC/parity type, 0=none */
+#define XCHAL_DATARAM0_BANKS		1	/* number of banks */
+
+/*  XLMI Port 0:  */
+#define XCHAL_XLMI0_VADDR		0x3FFC0000	/* virtual address */
+#define XCHAL_XLMI0_PADDR		0x3FFC0000	/* physical address */
+#define XCHAL_XLMI0_SIZE		131072	/* size in bytes */
+#define XCHAL_XLMI0_ECC_PARITY	0	/* ECC/parity type, 0=none */
+
+#define XCHAL_HAVE_IMEM_LOADSTORE	1	/* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		17	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		3	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F80FF
+#define XCHAL_INTLEVEL2_MASK		0x00000100
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00001000
+#define XCHAL_INTLEVEL5_MASK		0x00002000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F80FF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F81FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F8FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		4
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		1
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F8000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+#define XCHAL_INTTYPE_MASK_PROFILING	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL2_NUM		8
+#define XCHAL_INTLEVEL4_NUM		12
+#define XCHAL_INTLEVEL5_NUM		13
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 3.)  */
+
+
+/*
+ *  External interrupt mapping.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		15	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT16_NUM		21	/* (intlevel 3) */
+/*  EXTERNAL BInterrupt pin numbers mapped to each core interrupt number:  */
+#define XCHAL_INT0_EXTNUM		0	/* (intlevel 1) */
+#define XCHAL_INT1_EXTNUM		1	/* (intlevel 1) */
+#define XCHAL_INT2_EXTNUM		2	/* (intlevel 1) */
+#define XCHAL_INT3_EXTNUM		3	/* (intlevel 1) */
+#define XCHAL_INT4_EXTNUM		4	/* (intlevel 1) */
+#define XCHAL_INT5_EXTNUM		5	/* (intlevel 1) */
+#define XCHAL_INT8_EXTNUM		6	/* (intlevel 2) */
+#define XCHAL_INT9_EXTNUM		7	/* (intlevel 3) */
+#define XCHAL_INT12_EXTNUM		8	/* (intlevel 4) */
+#define XCHAL_INT14_EXTNUM		9	/* (intlevel 7) */
+#define XCHAL_INT15_EXTNUM		10	/* (intlevel 1) */
+#define XCHAL_INT16_EXTNUM		11	/* (intlevel 1) */
+#define XCHAL_INT17_EXTNUM		12	/* (intlevel 1) */
+#define XCHAL_INT18_EXTNUM		13	/* (intlevel 1) */
+#define XCHAL_INT19_EXTNUM		14	/* (intlevel 1) */
+#define XCHAL_INT20_EXTNUM		15	/* (intlevel 1) */
+#define XCHAL_INT21_EXTNUM		16	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_HALT			0	/* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER		0	/* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0x60000000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x60000000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0x50000000
+#define XCHAL_RESET_VECTOR0_PADDR	0x50000000
+#define XCHAL_RESET_VECTOR1_VADDR	0x40000400
+#define XCHAL_RESET_VECTOR1_PADDR	0x40000400
+#define XCHAL_RESET_VECTOR_VADDR	0x50000000
+#define XCHAL_RESET_VECTOR_PADDR	0x50000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0x60000340
+#define XCHAL_USER_VECTOR_PADDR		0x60000340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0x60000300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x60000300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x600003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x600003C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0x60000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x60000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x60000180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x60000180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x600001C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x600001C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x60000200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x60000200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0x60000240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x60000240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0x60000280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x60000280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0x600002C0
+#define XCHAL_NMI_VECTOR_PADDR		0x600002C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG MODULE
+  ----------------------------------------------------------------------*/
+
+/*  Misc  */
+#define XCHAL_HAVE_DEBUG_ERI		1	/* ERI to debug module */
+#define XCHAL_HAVE_DEBUG_APB		0	/* APB to debug module */
+#define XCHAL_HAVE_DEBUG_JTAG		1	/* JTAG to debug module */
+
+/*  On-Chip Debug (OCD)  */
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	0	/* faster OCD option (to LX4) */
+#define XCHAL_HAVE_OCD_LS32DDR		1	/* L32DDR/S32DDR (faster OCD) */
+
+/*  TRAX (in core)  */
+#define XCHAL_HAVE_TRAX			1	/* TRAX in debug module */
+#define XCHAL_TRAX_MEM_SIZE		262144	/* TRAX memory size in bytes */
+#define XCHAL_TRAX_MEM_SHAREABLE	0	/* start/end regs; ready sig. */
+#define XCHAL_TRAX_ATB_WIDTH		0	/* ATB width (bits), 0=no ATB */
+#define XCHAL_TRAX_TIME_WIDTH		0	/* timestamp bitwidth, 0=none */
+
+/*  Perf counters  */
+#define XCHAL_NUM_PERF_COUNTERS		0	/* performance counters */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY		0	/* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP		1	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	1	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		0	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+
+#define XCHAL_MMU_ASID_BITS		0	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			1	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		0	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
diff --git a/arch/xtensa/variants/de212/include/variant/tie-asm.h b/arch/xtensa/variants/de212/include/variant/tie-asm.h
new file mode 100644
index 000000000000..77755354f571
--- /dev/null
+++ b/arch/xtensa/variants/de212/include/variant/tie-asm.h
@@ -0,0 +1,170 @@
+/* 
+ * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file contains assembly-language definitions (assembly
+   macros, etc.) for this specific Xtensa processor's TIE extensions
+   and options.  It is customized to this Xtensa processor configuration.
+
+   Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+#define XTHAL_SAS_ANYOT	0x0003	/* both of the above */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+#define XTHAL_SAS_ANYCC	0x000C	/* both of the above */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+#define XTHAL_SAS_ANYABI	0x0070	/* all of the above three */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+#define XTHAL_SAS3(optie,ccuse,abi)	( ((optie) & XTHAL_SAS_ANYOT)  \
+					| ((ccuse) & XTHAL_SAS_ANYCC)  \
+					| ((abi)   & XTHAL_SAS_ANYABI) )
+
+
+    /*
+      *  Macro to store all non-coprocessor (extra) custom TIE and optional state
+      *  (not including zero-overhead loop registers).
+      *  Required parameters:
+      *      ptr         Save area pointer address register (clobbered)
+      *                  (register must contain a 4 byte aligned address).
+      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+      *                  registers are clobbered, the remaining are unused).
+      *  Optional parameters:
+      *      continue    If macro invoked as part of a larger store sequence, set to 1
+      *                  if this is not the first in the sequence.  Defaults to 0.
+      *      ofs         Offset from start of larger sequence (from value of first ptr
+      *                  in sequence) at which to store.  Defaults to next available space
+      *                  (or 0 if <continue> is 0).
+      *      select      Select what category(ies) of registers to store, as a bitmask
+      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
+      *      alloc       Select what category(ies) of registers to allocate; if any
+      *                  category is selected here that is not in <select>, space for
+      *                  the corresponding registers is skipped without doing any store.
+      */
+    .macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	rsr.ACCLO	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.ACCHI	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1004, 4, 4
+	rsr.SCOMPARE1	\at1		// conditional store option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.M0	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	rsr.M1	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+8
+	rsr.M2	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+12
+	rsr.M3	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+16
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 20
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1004, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 20
+	.endif
+    .endm	// xchal_ncp_store
+
+    /*
+      *  Macro to load all non-coprocessor (extra) custom TIE and optional state
+      *  (not including zero-overhead loop registers).
+      *  Required parameters:
+      *      ptr         Save area pointer address register (clobbered)
+      *                  (register must contain a 4 byte aligned address).
+      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+      *                  registers are clobbered, the remaining are unused).
+      *  Optional parameters:
+      *      continue    If macro invoked as part of a larger load sequence, set to 1
+      *                  if this is not the first in the sequence.  Defaults to 0.
+      *      ofs         Offset from start of larger sequence (from value of first ptr
+      *                  in sequence) at which to load.  Defaults to next available space
+      *                  (or 0 if <continue> is 0).
+      *      select      Select what category(ies) of registers to load, as a bitmask
+      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
+      *      alloc       Select what category(ies) of registers to allocate; if any
+      *                  category is selected here that is not in <select>, space for
+      *                  the corresponding registers is skipped without doing any load.
+      */
+    .macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.ACCLO	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.ACCHI	\at1		// MAC16 option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1004, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.SCOMPARE1	\at1		// conditional store option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.M0	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+8
+	wsr.M1	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+12
+	wsr.M2	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+16
+	wsr.M3	\at1		// MAC16 option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 20
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1004, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 20
+	.endif
+    .endm	// xchal_ncp_load
+
+
+#define XCHAL_NCP_NUM_ATMPS	1
+
+#define XCHAL_SA_NUM_ATMPS	1
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
diff --git a/arch/xtensa/variants/de212/include/variant/tie.h b/arch/xtensa/variants/de212/include/variant/tie.h
new file mode 100644
index 000000000000..b8a061a3fa10
--- /dev/null
+++ b/arch/xtensa/variants/de212/include/variant/tie.h
@@ -0,0 +1,136 @@
+/* 
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+   that extend basic Xtensa core functionality.  It is customized to this
+   Xtensa processor configuration.
+
+   Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			0	/* number of coprocessors */
+#define XCHAL_CP_MAX			0	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x00	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x00	/* bitmask of only port CPs */
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		28
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		32	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		4	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	7
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	0
+#define XCHAL_CP1_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+/* Byte length of instruction from its first byte, per FLIX.  */
+#define XCHAL_BYTE0_FORMAT_LENGTHS	\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+
+#endif /*_XTENSA_CORE_TIE_H*/
+
diff --git a/arch/xtensa/variants/test_kc705_hifi/include/variant/core.h b/arch/xtensa/variants/test_kc705_hifi/include/variant/core.h
new file mode 100644
index 000000000000..4a2222979f86
--- /dev/null
+++ b/arch/xtensa/variants/test_kc705_hifi/include/variant/core.h
@@ -0,0 +1,531 @@
+/* 
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ *				processor CORE configuration
+ *
+ *  See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+   Copyright (c) 1999-2014 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_LOOP_BUFFER_SIZE		0	/* zero-ov. loop instr buffer size */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		1	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		1	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	0	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS		1	/* WER/RER instructions */
+#define XCHAL_HAVE_MX			0	/* MX core (Tensilica internal) */
+#define XCHAL_HAVE_MP_INTERRUPTS	0	/* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL		0	/* core RunStall control port */
+#define XCHAL_HAVE_PSO			0	/* Power Shut-Off */
+#define XCHAL_HAVE_PSO_CDM		0	/* core/debug/mem pwr domains */
+#define XCHAL_HAVE_PSO_FULL_RETENTION	0	/* all regs preserved on PSO */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			8	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		1	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* single prec floating point */
+#define XCHAL_HAVE_FP_DIV		0	/* FP with DIV instructions */
+#define XCHAL_HAVE_FP_RECIP		0	/* FP with RECIP instructions */
+#define XCHAL_HAVE_FP_SQRT		0	/* FP with SQRT instructions */
+#define XCHAL_HAVE_FP_RSQRT		0	/* FP with RSQRT instructions */
+#define XCHAL_HAVE_DFP			0	/* double precision FP pkg */
+#define XCHAL_HAVE_DFP_DIV		0	/* DFP with DIV instructions */
+#define XCHAL_HAVE_DFP_RECIP		0	/* DFP with RECIP instructions*/
+#define XCHAL_HAVE_DFP_SQRT		0	/* DFP with SQRT instructions */
+#define XCHAL_HAVE_DFP_RSQRT		0	/* DFP with RSQRT instructions*/
+#define XCHAL_HAVE_DFP_accel		0	/* double precision FP acceleration pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFIPRO		0	/* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3		1	/* HiFi3 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2		0	/* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2EP		0	/* HiFi2EP */
+#define XCHAL_HAVE_HIFI_MINI		0	
+#define XCHAL_HAVE_CONNXD2		0	/* ConnX D2 pkg */
+#define XCHAL_HAVE_BBE16		0	/* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT		0	/* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV		0	/* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD	0	/* BBE16 & despread */
+#define XCHAL_HAVE_BBENEP		0	/* ConnX BBENEP pkgs */
+#define XCHAL_HAVE_BSP3			0	/* ConnX BSP3 pkg */
+#define XCHAL_HAVE_BSP3_TRANSPOSE	0	/* BSP3 & transpose32x32 */
+#define XCHAL_HAVE_SSP16		0	/* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI	0	/* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16		0	/* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16		0	/* ConnX BBP16 pkg */
+#define XCHAL_HAVE_FLIX3		0	/* basic 3-way FLIX option */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_LOADSTORE_UNITS	1	/* load/store units */
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		8	/* data width in bytes */
+#define XCHAL_DATA_PIPE_DELAY		1	/* d-side pipeline delay
+						   (1 = 5-stage, 2 = 7-stage) */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW		0	/* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW	0	/* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION		1000004	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"test_kc705_hifi"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID		0x0004983D	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC1B3FFFE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x1904983D	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX5.0.4"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2500	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		4	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		250004	/* major*100+minor */
+#define XCHAL_HW_REL_LX5		1
+#define XCHAL_HW_REL_LX5_0		1
+#define XCHAL_HW_REL_LX5_0_4		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2500	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	4	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		250004	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2500	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	4	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		250004	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT	0	/* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH		1	/* PREFCTL register */
+#define XCHAL_HAVE_PREFETCH_L1		0	/* prefetch to L1 dcache */
+#define XCHAL_PREFETCH_CASTOUT_LINES	1	/* dcache pref. castout bufsz */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		7
+#define XCHAL_DCACHE_SETWIDTH		7
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		4
+#define XCHAL_DCACHE_WAYS		4
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	1
+#define XCHAL_DCACHE_LINE_LOCKABLE	1
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Cache access size in bytes (affects operation of SICW instruction):  */
+#define XCHAL_ICACHE_ACCESS_SIZE	8
+#define XCHAL_DCACHE_ACCESS_SIZE	8
+
+#define XCHAL_DCACHE_BANKS		1	/* number of banks */
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+#define XCHAL_HAVE_IMEM_LOADSTORE	1	/* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			1	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		3	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		22	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	5	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		16	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		6	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		3	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x001F00BF
+#define XCHAL_INTLEVEL2_MASK		0x00000140
+#define XCHAL_INTLEVEL3_MASK		0x00200E00
+#define XCHAL_INTLEVEL4_MASK		0x00009000
+#define XCHAL_INTLEVEL5_MASK		0x00002000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00004000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x001F00BF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x001F01FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x003F0FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x003FFFFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		2
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		2
+#define XCHAL_INT9_LEVEL		3
+#define XCHAL_INT10_LEVEL		3
+#define XCHAL_INT11_LEVEL		3
+#define XCHAL_INT12_LEVEL		4
+#define XCHAL_INT13_LEVEL		5
+#define XCHAL_INT14_LEVEL		7
+#define XCHAL_INT15_LEVEL		4
+#define XCHAL_INT16_LEVEL		1
+#define XCHAL_INT17_LEVEL		1
+#define XCHAL_INT18_LEVEL		1
+#define XCHAL_INT19_LEVEL		1
+#define XCHAL_INT20_LEVEL		1
+#define XCHAL_INT21_LEVEL		3
+#define XCHAL_DEBUGLEVEL		6	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+#define XCHAL_NMILEVEL			7	/* NMI "level" (for use with
+						   EXCSAVE/EPS/EPC_n, RFI n) */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE 	XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE 	XTHAL_INTTYPE_PROFILING
+#define XCHAL_INT16_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x003F0000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER	0x00002440
+#define XCHAL_INTTYPE_MASK_NMI		0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+#define XCHAL_INTTYPE_MASK_PROFILING	0x00008000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		10	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		13	/* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT		14	/* non-maskable interrupt */
+#define XCHAL_PROFILING_INTERRUPT	15	/* profiling interrupt */
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+#define XCHAL_INTLEVEL5_NUM		13
+#define XCHAL_INTLEVEL7_NUM		14
+/*  (There are many interrupts each at level(s) 1, 2, 3, 4.)  */
+
+
+/*
+ *  External interrupt mapping.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		8	/* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM		9	/* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM		12	/* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM		14	/* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM		16	/* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM		17	/* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM		18	/* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM		19	/* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM		20	/* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM		21	/* (intlevel 3) */
+/*  EXTERNAL BInterrupt pin numbers mapped to each core interrupt number:  */
+#define XCHAL_INT0_EXTNUM		0	/* (intlevel 1) */
+#define XCHAL_INT1_EXTNUM		1	/* (intlevel 1) */
+#define XCHAL_INT2_EXTNUM		2	/* (intlevel 1) */
+#define XCHAL_INT3_EXTNUM		3	/* (intlevel 1) */
+#define XCHAL_INT4_EXTNUM		4	/* (intlevel 1) */
+#define XCHAL_INT5_EXTNUM		5	/* (intlevel 1) */
+#define XCHAL_INT8_EXTNUM		6	/* (intlevel 2) */
+#define XCHAL_INT9_EXTNUM		7	/* (intlevel 3) */
+#define XCHAL_INT12_EXTNUM		8	/* (intlevel 4) */
+#define XCHAL_INT14_EXTNUM		9	/* (intlevel 7) */
+#define XCHAL_INT16_EXTNUM		10	/* (intlevel 1) */
+#define XCHAL_INT17_EXTNUM		11	/* (intlevel 1) */
+#define XCHAL_INT18_EXTNUM		12	/* (intlevel 1) */
+#define XCHAL_INT19_EXTNUM		13	/* (intlevel 1) */
+#define XCHAL_INT20_EXTNUM		14	/* (intlevel 1) */
+#define XCHAL_INT21_EXTNUM		15	/* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_HALT			0	/* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER		0	/* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0x00002000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00002000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0x00001000
+#define XCHAL_RESET_VECTOR1_PADDR	0x00001000
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0x00002340
+#define XCHAL_USER_VECTOR_PADDR		0x00002340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0x00002300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00002300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0x000023C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000023C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0x00002000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00002000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0x00002180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00002180
+#define XCHAL_INTLEVEL3_VECOFS		0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR	0x000021C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR	0x000021C0
+#define XCHAL_INTLEVEL4_VECOFS		0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR	0x00002200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR	0x00002200
+#define XCHAL_INTLEVEL5_VECOFS		0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR	0x00002240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR	0x00002240
+#define XCHAL_INTLEVEL6_VECOFS		0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR	0x00002280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR	0x00002280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS		0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR		0x000022C0
+#define XCHAL_NMI_VECTOR_PADDR		0x000022C0
+#define XCHAL_INTLEVEL7_VECOFS		XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR	XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR	XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG MODULE
+  ----------------------------------------------------------------------*/
+
+/*  Misc  */
+#define XCHAL_HAVE_DEBUG_ERI		1	/* ERI to debug module */
+#define XCHAL_HAVE_DEBUG_APB		0	/* APB to debug module */
+#define XCHAL_HAVE_DEBUG_JTAG		1	/* JTAG to debug module */
+
+/*  On-Chip Debug (OCD)  */
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		2	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		2	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	0	/* faster OCD option (to LX4) */
+#define XCHAL_HAVE_OCD_LS32DDR		1	/* L32DDR/S32DDR (faster OCD) */
+
+/*  TRAX (in core)  */
+#define XCHAL_HAVE_TRAX			1	/* TRAX in debug module */
+#define XCHAL_TRAX_MEM_SIZE		262144	/* TRAX memory size in bytes */
+#define XCHAL_TRAX_MEM_SHAREABLE	1	/* start/end regs; ready sig. */
+#define XCHAL_TRAX_ATB_WIDTH		0	/* ATB width (bits), 0=no ATB */
+#define XCHAL_TRAX_TIME_WIDTH		0	/* timestamp bitwidth, 0=none */
+
+/*  Perf counters  */
+#define XCHAL_NUM_PERF_COUNTERS		8	/* performance counters */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		1	/* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY		6	/* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
diff --git a/arch/xtensa/variants/test_kc705_hifi/include/variant/tie-asm.h b/arch/xtensa/variants/test_kc705_hifi/include/variant/tie-asm.h
new file mode 100644
index 000000000000..378163c0a7ad
--- /dev/null
+++ b/arch/xtensa/variants/test_kc705_hifi/include/variant/tie-asm.h
@@ -0,0 +1,328 @@
+/* 
+ * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file contains assembly-language definitions (assembly
+   macros, etc.) for this specific Xtensa processor's TIE extensions
+   and options.  It is customized to this Xtensa processor configuration.
+
+   Copyright (c) 1999-2014 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+#define XTHAL_SAS_ANYOT	0x0003	/* both of the above */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+#define XTHAL_SAS_ANYCC	0x000C	/* both of the above */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+#define XTHAL_SAS_ANYABI 0x0070	/* all of the above three */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+#define XTHAL_SAS3(optie,ccuse,abi)	( ((optie) & XTHAL_SAS_ANYOT)  \
+					| ((ccuse) & XTHAL_SAS_ANYCC)  \
+					| ((abi)   & XTHAL_SAS_ANYABI) )
+
+
+
+    /*
+     *  Macro to save all non-coprocessor (extra) custom TIE and optional state
+     *  (not including zero-overhead loop registers).
+     *  Required parameters:
+     *      ptr		Save area pointer address register (clobbered)
+     *			(register must contain a 4 byte aligned address).
+     *      at1..at4	Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+     *			registers are clobbered, the remaining are unused).
+     *  Optional parameters:
+     *      continue	If macro invoked as part of a larger store sequence, set to 1
+     *			if this is not the first in the sequence.  Defaults to 0.
+     *      ofs		Offset from start of larger sequence (from value of first ptr
+     *			in sequence) at which to store.  Defaults to next available space
+     *			(or 0 if <continue> is 0).
+     *      select	Select what category(ies) of registers to store, as a bitmask
+     *			(see XTHAL_SAS_xxx constants).  Defaults to all registers.
+     *      alloc	Select what category(ies) of registers to allocate; if any
+     *			category is selected here that is not in <select>, space for
+     *			the corresponding registers is skipped without doing any store.
+     */
+    .macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional global register used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	rur.THREADPTR	\at1		// threadptr option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	rsr.ACCLO	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.ACCHI	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	rsr.M0	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rsr.M1	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	rsr.M2	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+8
+	rsr.M3	\at1		// MAC16 option
+	s32i	\at1, \ptr, .Lxchal_ofs_+12
+	rsr.BR	\at1		// boolean option
+	s32i	\at1, \ptr, .Lxchal_ofs_+16
+	rsr.SCOMPARE1	\at1		// conditional store option
+	s32i	\at1, \ptr, .Lxchal_ofs_+20
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.endif
+    .endm	// xchal_ncp_store
+
+    /*
+     *  Macro to restore all non-coprocessor (extra) custom TIE and optional state
+     *  (not including zero-overhead loop registers).
+     *  Required parameters:
+     *      ptr		Save area pointer address register (clobbered)
+     *			(register must contain a 4 byte aligned address).
+     *      at1..at4	Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+     *			registers are clobbered, the remaining are unused).
+     *  Optional parameters:
+     *      continue	If macro invoked as part of a larger load sequence, set to 1
+     *			if this is not the first in the sequence.  Defaults to 0.
+     *      ofs		Offset from start of larger sequence (from value of first ptr
+     *			in sequence) at which to load.  Defaults to next available space
+     *			(or 0 if <continue> is 0).
+     *      select	Select what category(ies) of registers to load, as a bitmask
+     *			(see XTHAL_SAS_xxx constants).  Defaults to all registers.
+     *      alloc	Select what category(ies) of registers to allocate; if any
+     *			category is selected here that is not in <select>, space for
+     *			the corresponding registers is skipped without doing any load.
+     */
+    .macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start	\continue, \ofs
+	// Optional global register used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wur.THREADPTR	\at1		// threadptr option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1020, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	// Optional caller-saved registers used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.ACCLO	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.ACCHI	\at1		// MAC16 option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1016, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
+	.endif
+	// Optional caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wsr.M0	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wsr.M1	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+8
+	wsr.M2	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+12
+	wsr.M3	\at1		// MAC16 option
+	l32i	\at1, \ptr, .Lxchal_ofs_+16
+	wsr.BR	\at1		// boolean option
+	l32i	\at1, \ptr, .Lxchal_ofs_+20
+	wsr.SCOMPARE1	\at1		// conditional store option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 1000, 4, 4
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
+	.endif
+    .endm	// xchal_ncp_load
+
+
+#define XCHAL_NCP_NUM_ATMPS	1
+
+
+
+
+    /*
+     *  Macro to save the state of TIE coprocessor AudioEngineLX.
+     *  Required parameters:
+     *      ptr		Save area pointer address register (clobbered)
+     *			(register must contain a 8 byte aligned address).
+     *      at1..at4	Four temporary address registers (first XCHAL_CP1_NUM_ATMPS
+     *			registers are clobbered, the remaining are unused).
+     *  Optional parameters are the same as for xchal_ncp_store.
+     */
+#define xchal_cp_AudioEngineLX_store	xchal_cp1_store
+    .macro	xchal_cp1_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start \continue, \ofs
+	// Custom caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	rur.AE_OVF_SAR	\at1		// ureg 240
+	s32i	\at1, \ptr, .Lxchal_ofs_+0
+	rur.AE_BITHEAD	\at1		// ureg 241
+	s32i	\at1, \ptr, .Lxchal_ofs_+4
+	rur.AE_TS_FTS_BU_BP	\at1		// ureg 242
+	s32i	\at1, \ptr, .Lxchal_ofs_+8
+	rur.AE_CW_SD_NO	\at1		// ureg 243
+	s32i	\at1, \ptr, .Lxchal_ofs_+12
+	rur.AE_CBEGIN0	\at1		// ureg 246
+	s32i	\at1, \ptr, .Lxchal_ofs_+16
+	rur.AE_CEND0	\at1		// ureg 247
+	s32i	\at1, \ptr, .Lxchal_ofs_+20
+	AE_S64.I	aed0, \ptr, .Lxchal_ofs_+24
+	AE_S64.I	aed1, \ptr, .Lxchal_ofs_+32
+	AE_S64.I	aed2, \ptr, .Lxchal_ofs_+40
+	AE_S64.I	aed3, \ptr, .Lxchal_ofs_+48
+	AE_S64.I	aed4, \ptr, .Lxchal_ofs_+56
+	addi	\ptr, \ptr, 64
+	AE_S64.I	aed5, \ptr, .Lxchal_ofs_+0
+	AE_S64.I	aed6, \ptr, .Lxchal_ofs_+8
+	AE_S64.I	aed7, \ptr, .Lxchal_ofs_+16
+	AE_S64.I	aed8, \ptr, .Lxchal_ofs_+24
+	AE_S64.I	aed9, \ptr, .Lxchal_ofs_+32
+	AE_S64.I	aed10, \ptr, .Lxchal_ofs_+40
+	AE_S64.I	aed11, \ptr, .Lxchal_ofs_+48
+	AE_S64.I	aed12, \ptr, .Lxchal_ofs_+56
+	addi	\ptr, \ptr, 64
+	AE_S64.I	aed13, \ptr, .Lxchal_ofs_+0
+	AE_S64.I	aed14, \ptr, .Lxchal_ofs_+8
+	AE_S64.I	aed15, \ptr, .Lxchal_ofs_+16
+	AE_SALIGN64.I	u0, \ptr, .Lxchal_ofs_+24
+	AE_SALIGN64.I	u1, \ptr, .Lxchal_ofs_+32
+	AE_SALIGN64.I	u2, \ptr, .Lxchal_ofs_+40
+	AE_SALIGN64.I	u3, \ptr, .Lxchal_ofs_+48
+	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 128
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 56
+	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 184
+	.endif
+    .endm	// xchal_cp1_store
+
+    /*
+     *  Macro to restore the state of TIE coprocessor AudioEngineLX.
+     *  Required parameters:
+     *      ptr		Save area pointer address register (clobbered)
+     *			(register must contain a 8 byte aligned address).
+     *      at1..at4	Four temporary address registers (first XCHAL_CP1_NUM_ATMPS
+     *			registers are clobbered, the remaining are unused).
+     *  Optional parameters are the same as for xchal_ncp_load.
+     */
+#define xchal_cp_AudioEngineLX_load	xchal_cp1_load
+    .macro	xchal_cp1_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+	xchal_sa_start \continue, \ofs
+	// Custom caller-saved registers not used by default by the compiler:
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	l32i	\at1, \ptr, .Lxchal_ofs_+0
+	wur.AE_OVF_SAR	\at1		// ureg 240
+	l32i	\at1, \ptr, .Lxchal_ofs_+4
+	wur.AE_BITHEAD	\at1		// ureg 241
+	l32i	\at1, \ptr, .Lxchal_ofs_+8
+	wur.AE_TS_FTS_BU_BP	\at1		// ureg 242
+	l32i	\at1, \ptr, .Lxchal_ofs_+12
+	wur.AE_CW_SD_NO	\at1		// ureg 243
+	l32i	\at1, \ptr, .Lxchal_ofs_+16
+	wur.AE_CBEGIN0	\at1		// ureg 246
+	l32i	\at1, \ptr, .Lxchal_ofs_+20
+	wur.AE_CEND0	\at1		// ureg 247
+	AE_L64.I	aed0, \ptr, .Lxchal_ofs_+24
+	AE_L64.I	aed1, \ptr, .Lxchal_ofs_+32
+	AE_L64.I	aed2, \ptr, .Lxchal_ofs_+40
+	AE_L64.I	aed3, \ptr, .Lxchal_ofs_+48
+	AE_L64.I	aed4, \ptr, .Lxchal_ofs_+56
+	addi	\ptr, \ptr, 64
+	AE_L64.I	aed5, \ptr, .Lxchal_ofs_+0
+	AE_L64.I	aed6, \ptr, .Lxchal_ofs_+8
+	AE_L64.I	aed7, \ptr, .Lxchal_ofs_+16
+	AE_L64.I	aed8, \ptr, .Lxchal_ofs_+24
+	AE_L64.I	aed9, \ptr, .Lxchal_ofs_+32
+	AE_L64.I	aed10, \ptr, .Lxchal_ofs_+40
+	AE_L64.I	aed11, \ptr, .Lxchal_ofs_+48
+	AE_L64.I	aed12, \ptr, .Lxchal_ofs_+56
+	addi	\ptr, \ptr, 64
+	AE_L64.I	aed13, \ptr, .Lxchal_ofs_+0
+	AE_L64.I	aed14, \ptr, .Lxchal_ofs_+8
+	AE_L64.I	aed15, \ptr, .Lxchal_ofs_+16
+	AE_LALIGN64.I	u0, \ptr, .Lxchal_ofs_+24
+	AE_LALIGN64.I	u1, \ptr, .Lxchal_ofs_+32
+	AE_LALIGN64.I	u2, \ptr, .Lxchal_ofs_+40
+	AE_LALIGN64.I	u3, \ptr, .Lxchal_ofs_+48
+	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 128
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 56
+	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+	xchal_sa_align	\ptr, 0, 0, 8, 8
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 184
+	.endif
+    .endm	// xchal_cp1_load
+
+#define XCHAL_CP1_NUM_ATMPS	1
+#define XCHAL_SA_NUM_ATMPS	1
+
+	/*  Empty macros for unconfigured coprocessors:  */
+	.macro xchal_cp0_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp0_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp6_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp6_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
diff --git a/arch/xtensa/variants/test_kc705_hifi/include/variant/tie.h b/arch/xtensa/variants/test_kc705_hifi/include/variant/tie.h
new file mode 100644
index 000000000000..e39fea64391e
--- /dev/null
+++ b/arch/xtensa/variants/test_kc705_hifi/include/variant/tie.h
@@ -0,0 +1,189 @@
+/* 
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ *  NOTE:  This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+   that extend basic Xtensa core functionality.  It is customized to this
+   Xtensa processor configuration.
+
+   Copyright (c) 1999-2014 Tensilica Inc.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   "Software"), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+   EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+   CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+   TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			2	/* number of coprocessors */
+#define XCHAL_CP_MAX			8	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x82	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x80	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP1_NAME			"AudioEngineLX"
+#define XCHAL_CP1_IDENT			AudioEngineLX
+#define XCHAL_CP1_SA_SIZE		184	/* size of state save area */
+#define XCHAL_CP1_SA_ALIGN		8	/* min alignment of save area */
+#define XCHAL_CP_ID_AUDIOENGINELX	1	/* coprocessor ID (0..7) */
+#define XCHAL_CP7_NAME			"XTIOP"
+#define XCHAL_CP7_IDENT			XTIOP
+#define XCHAL_CP7_SA_SIZE		0	/* size of state save area */
+#define XCHAL_CP7_SA_ALIGN		1	/* min alignment of save area */
+#define XCHAL_CP_ID_XTIOP		7	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		36
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		240	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		8	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	9
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acclo, 4, 4, 4,0x0210,  sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1,          acchi, 4, 4, 4,0x0211,  sr,17 ,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m0, 4, 4, 4,0x0220,  sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m1, 4, 4, 4,0x0221,  sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m2, 4, 4, 4,0x0222,  sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             m3, 4, 4, 4,0x0223,  sr,35 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	26
+#define XCHAL_CP1_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,1,0,     ae_ovf_sar, 8, 4, 4,0x03F0,  ur,240,  8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_bithead, 4, 4, 4,0x03F1,  ur,241, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2,  ur,242, 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,    ae_cw_sd_no, 4, 4, 4,0x03F3,  ur,243, 29,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_cbegin0, 4, 4, 4,0x03F6,  ur,246, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ae_cend0, 4, 4, 4,0x03F7,  ur,247, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed0, 8, 8, 8,0x1010, aed,0  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed1, 8, 8, 8,0x1011, aed,1  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed2, 8, 8, 8,0x1012, aed,2  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed3, 8, 8, 8,0x1013, aed,3  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed4, 8, 8, 8,0x1014, aed,4  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed5, 8, 8, 8,0x1015, aed,5  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed6, 8, 8, 8,0x1016, aed,6  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed7, 8, 8, 8,0x1017, aed,7  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed8, 8, 8, 8,0x1018, aed,8  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aed9, 8, 8, 8,0x1019, aed,9  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed10, 8, 8, 8,0x101A, aed,10 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed11, 8, 8, 8,0x101B, aed,11 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed12, 8, 8, 8,0x101C, aed,12 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed13, 8, 8, 8,0x101D, aed,13 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed14, 8, 8, 8,0x101E, aed,14 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,          aed15, 8, 8, 8,0x101F, aed,15 , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u0, 8, 8, 8,0x1020,   u,0  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u1, 8, 8, 8,0x1021,   u,1  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u2, 8, 8, 8,0x1022,   u,2  , 64,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,             u3, 8, 8, 8,0x1023,   u,3  , 64,0,0,0)
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8
+/* Byte length of instruction from its first byte, per FLIX.  */
+#define XCHAL_BYTE0_FORMAT_LENGTHS	\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8,\
+	3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,8,8
+
+#endif /*_XTENSA_CORE_TIE_H*/
diff --git a/arch/xtensa/variants/test_mmuhifi_c3/include/variant/core.h b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/core.h
new file mode 100644
index 000000000000..7c5d3a22da12
--- /dev/null
+++ b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/core.h
@@ -0,0 +1,383 @@
+/*
+ * Xtensa processor core configuration information.
+ *
+ * This file is subject to the terms and conditions of version 2.1 of the GNU
+ * Lesser General Public License as published by the Free Software Foundation.
+ *
+ * Copyright (c) 1999-2009 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+	    Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ *  Note:  Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ *  configured, and a value of 0 otherwise.  These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+				ISA
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE			0	/* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED		1	/* windowed registers option */
+#define XCHAL_NUM_AREGS			32	/* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2		5	/* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE	8	/* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG		1	/* debug option */
+#define XCHAL_HAVE_DENSITY		1	/* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS		1	/* zero-overhead loops */
+#define XCHAL_HAVE_NSA			1	/* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX		1	/* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT			1	/* SEXT instruction */
+#define XCHAL_HAVE_CLAMPS		1	/* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16		1	/* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32		1	/* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH		0	/* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32		0	/* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R			1	/* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS	1	/* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16		0	/* CONST16 instruction */
+#define XCHAL_HAVE_ADDX			1	/* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES	0	/* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES	0	/* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12		1	/* (obsolete option) */
+#define XCHAL_HAVE_ABS			1	/* ABS instruction */
+/*#define XCHAL_HAVE_POPC		0*/	/* POPC instruction */
+/*#define XCHAL_HAVE_CRC		0*/	/* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC		1	/* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I		1	/* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION		0	/* speculation */
+#define XCHAL_HAVE_FULL_RESET		1	/* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS		1	/* */
+#define XCHAL_NUM_MISC_REGS		2	/* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER		0	/* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID			1	/* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS		1	/* WER/RER instructions */
+#define XCHAL_HAVE_MP_INTERRUPTS	1	/* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL		1	/* core RunStall control port */
+#define XCHAL_HAVE_THREADPTR		1	/* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS		1	/* boolean registers */
+#define XCHAL_HAVE_CP			1	/* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG			2	/* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16		0	/* MAC16 package */
+#define XCHAL_HAVE_VECTORFPU2005	0	/* vector floating-point pkg */
+#define XCHAL_HAVE_FP			0	/* floating point pkg */
+#define XCHAL_HAVE_DFP			0	/* double precision FP pkg */
+#define XCHAL_HAVE_DFP_accel		0	/* double precision FP acceleration pkg */
+#define XCHAL_HAVE_VECTRA1		0	/* Vectra I  pkg */
+#define XCHAL_HAVE_VECTRALX		0	/* Vectra LX pkg */
+#define XCHAL_HAVE_HIFIPRO		0	/* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2		1	/* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_CONNXD2		0	/* ConnX D2 pkg */
+
+
+/*----------------------------------------------------------------------
+				MISC
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES	8	/* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH		8	/* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH		8	/* data width in bytes */
+/*  In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION	1	/* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION	1	/* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW		0	/* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW	0	/* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION		800000	/* sw version of this header */
+
+#define XCHAL_CORE_ID			"test_mmuhifi_c3"	/* alphanum core name
+						   (CoreID) set in the Xtensa
+						   Processor Generator */
+
+#define XCHAL_CORE_DESCRIPTION		"test_mmuhifi_c3"
+#define XCHAL_BUILD_UNIQUE_ID		0x00005A6A	/* 22-bit sw build ID */
+
+/*
+ *  These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0		0xC1B3CBFE	/* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1		0x10405A6A	/* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME		"LX3.0.0"	/* full version name */
+#define XCHAL_HW_VERSION_MAJOR		2300	/* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR		0	/* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION		230000	/* major*100+minor */
+#define XCHAL_HW_REL_LX3		1
+#define XCHAL_HW_REL_LX3_0		1
+#define XCHAL_HW_REL_LX3_0_0		1
+#define XCHAL_HW_CONFIGID_RELIABLE	1
+/*  If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR	2300	/* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR	0	/* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION		230000	/* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR	2300	/* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR	0	/* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION		230000	/* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE		32	/* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE		32	/* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH		5	/* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH		5	/* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE		16384	/* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE		16384	/* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK	1	/* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT	1	/* MP coherence feature */
+
+
+
+
+/****************************************************************************
+    Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+				CACHE
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF			1	/* any outbound PIF present */
+
+/*  If present, cache size in bytes == (ways * 2^(linewidth + setwidth)).  */
+
+/*  Number of cache sets in log2(lines per way):  */
+#define XCHAL_ICACHE_SETWIDTH		8
+#define XCHAL_DCACHE_SETWIDTH		8
+
+/*  Cache set associativity (number of ways):  */
+#define XCHAL_ICACHE_WAYS		2
+#define XCHAL_DCACHE_WAYS		2
+
+/*  Cache features:  */
+#define XCHAL_ICACHE_LINE_LOCKABLE	0
+#define XCHAL_DCACHE_LINE_LOCKABLE	0
+#define XCHAL_ICACHE_ECC_PARITY		0
+#define XCHAL_DCACHE_ECC_PARITY		0
+
+/*  Cache access size in bytes (affects operation of SICW instruction):  */
+#define XCHAL_ICACHE_ACCESS_SIZE	8
+#define XCHAL_DCACHE_ACCESS_SIZE	8
+
+/*  Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits):  */
+#define XCHAL_CA_BITS			4
+
+
+/*----------------------------------------------------------------------
+			INTERNAL I/D RAM/ROMs and XLMI
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM		0	/* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM		0	/* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM		0	/* number of core data ROMs */
+#define XCHAL_NUM_DATARAM		0	/* number of core data RAMs */
+#define XCHAL_NUM_URAM			0	/* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI			0	/* number of core XLMI ports */
+
+
+/*----------------------------------------------------------------------
+			INTERRUPTS and TIMERS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS		1	/* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS	1	/* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI			0	/* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT		1	/* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS		2	/* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS		12	/* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2	4	/* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS		9	/* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS		2	/* number of interrupt levels
+						   (not including level zero) */
+#define XCHAL_EXCM_LEVEL		1	/* level masked by PS.EXCM */
+	/* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/*  Masks of interrupts at each interrupt level:  */
+#define XCHAL_INTLEVEL1_MASK		0x00000FFF
+#define XCHAL_INTLEVEL2_MASK		0x00000000
+#define XCHAL_INTLEVEL3_MASK		0x00000000
+#define XCHAL_INTLEVEL4_MASK		0x00000000
+#define XCHAL_INTLEVEL5_MASK		0x00000000
+#define XCHAL_INTLEVEL6_MASK		0x00000000
+#define XCHAL_INTLEVEL7_MASK		0x00000000
+
+/*  Masks of interrupts at each range 1..n of interrupt levels:  */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK	0x00000FFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK	0x00000FFF
+
+/*  Level of each interrupt:  */
+#define XCHAL_INT0_LEVEL		1
+#define XCHAL_INT1_LEVEL		1
+#define XCHAL_INT2_LEVEL		1
+#define XCHAL_INT3_LEVEL		1
+#define XCHAL_INT4_LEVEL		1
+#define XCHAL_INT5_LEVEL		1
+#define XCHAL_INT6_LEVEL		1
+#define XCHAL_INT7_LEVEL		1
+#define XCHAL_INT8_LEVEL		1
+#define XCHAL_INT9_LEVEL		1
+#define XCHAL_INT10_LEVEL		1
+#define XCHAL_INT11_LEVEL		1
+#define XCHAL_DEBUGLEVEL		2	/* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT	1	/* OCD external db interrupt */
+
+/*  Type of each interrupt:  */
+#define XCHAL_INT0_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE 	XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT3_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE 	XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE 	XTHAL_INTTYPE_TIMER
+#define XCHAL_INT9_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT11_TYPE 	XTHAL_INTTYPE_EXTERN_LEVEL
+
+/*  Masks of interrupts for each type of interrupt:  */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED	0xFFFFF000
+#define XCHAL_INTTYPE_MASK_SOFTWARE	0x00000080
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE	0x00000004
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL	0x00000E3B
+#define XCHAL_INTTYPE_MASK_TIMER	0x00000140
+#define XCHAL_INTTYPE_MASK_NMI		0x00000000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR	0x00000000
+
+/*  Interrupt numbers assigned to specific interrupt sources:  */
+#define XCHAL_TIMER0_INTERRUPT		6	/* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT		8	/* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_TIMER3_INTERRUPT		XTHAL_TIMER_UNCONFIGURED
+
+/*  Interrupt numbers for levels at which only one interrupt is configured:  */
+/*  (There are many interrupts each at level(s) 1.)  */
+
+
+/*
+ *  External interrupt vectors/levels.
+ *  These macros describe how Xtensa processor interrupt numbers
+ *  (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ *  map to external BInterrupt<n> pins, for those interrupts
+ *  configured as external (level-triggered, edge-triggered, or NMI).
+ *  See the Xtensa processor databook for more details.
+ */
+
+/*  Core interrupt numbers mapped to each EXTERNAL interrupt number:  */
+#define XCHAL_EXTINT0_NUM		0	/* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM		1	/* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM		2	/* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM		3	/* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM		4	/* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM		5	/* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM		9	/* (intlevel 1) */
+#define XCHAL_EXTINT7_NUM		10	/* (intlevel 1) */
+#define XCHAL_EXTINT8_NUM		11	/* (intlevel 1) */
+
+
+/*----------------------------------------------------------------------
+			EXCEPTIONS and VECTORS
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION		2	/* Xtensa Exception Architecture
+						   number: 1 == XEA1 (old)
+							   2 == XEA2 (new)
+							   0 == XEAX (extern) */
+#define XCHAL_HAVE_XEA1			0	/* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2			1	/* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX			0	/* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS		1	/* exception option */
+#define XCHAL_HAVE_MEM_ECC_PARITY	0	/* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT	1	/* relocatable vectors */
+#define XCHAL_HAVE_VECBASE		1	/* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR	0xD0000000  /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR	0x00000000
+#define XCHAL_RESET_VECBASE_OVERLAP	0
+
+#define XCHAL_RESET_VECTOR0_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR0_PADDR	0xFE000000
+#define XCHAL_RESET_VECTOR1_VADDR	0xD8000500
+#define XCHAL_RESET_VECTOR1_PADDR	0x00000500
+#define XCHAL_RESET_VECTOR_VADDR	0xFE000000
+#define XCHAL_RESET_VECTOR_PADDR	0xFE000000
+#define XCHAL_USER_VECOFS		0x00000340
+#define XCHAL_USER_VECTOR_VADDR		0xD0000340
+#define XCHAL_USER_VECTOR_PADDR		0x00000340
+#define XCHAL_KERNEL_VECOFS		0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR	0xD0000300
+#define XCHAL_KERNEL_VECTOR_PADDR	0x00000300
+#define XCHAL_DOUBLEEXC_VECOFS		0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR	0xD00003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR	0x000003C0
+#define XCHAL_WINDOW_OF4_VECOFS		0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS		0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS		0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS		0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS	0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS	0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR	0xD0000000
+#define XCHAL_WINDOW_VECTORS_PADDR	0x00000000
+#define XCHAL_INTLEVEL2_VECOFS		0x00000280
+#define XCHAL_INTLEVEL2_VECTOR_VADDR	0xD0000280
+#define XCHAL_INTLEVEL2_VECTOR_PADDR	0x00000280
+#define XCHAL_DEBUG_VECOFS		XCHAL_INTLEVEL2_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR	XCHAL_INTLEVEL2_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR	XCHAL_INTLEVEL2_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+				DEBUG
+  ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_OCD			1	/* OnChipDebug option */
+#define XCHAL_NUM_IBREAK		0	/* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK		0	/* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY	0	/* faster OCD option */
+
+
+/*----------------------------------------------------------------------
+				MMU
+  ----------------------------------------------------------------------*/
+
+/*  See core-matmap.h header file for more details.  */
+
+#define XCHAL_HAVE_TLBS			1	/* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY		0	/* one way maps I+D 4GB vaddr */
+#define XCHAL_HAVE_IDENTITY_MAP		0	/* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR		0	/* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR	0	/* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR	0	/* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU		1	/* full MMU (with page table
+						   [autorefill] and protection)
+						   usable for an MMU-based OS */
+/*  If none of the above last 4 are set, it's a custom TLB configuration.  */
+#define XCHAL_ITLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+#define XCHAL_DTLB_ARF_ENTRIES_LOG2	2	/* log2(autorefill way size) */
+
+#define XCHAL_MMU_ASID_BITS		8	/* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS			4	/* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS		2	/* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
diff --git a/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie-asm.h b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie-asm.h
new file mode 100644
index 000000000000..6e9d69caf7e6
--- /dev/null
+++ b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie-asm.h
@@ -0,0 +1,182 @@
+/*
+ * This header file contains assembly-language definitions (assembly
+ * macros, etc.) for this specific Xtensa processor's TIE extensions
+ * and options.  It is customized to this Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of version 2.1 of the GNU
+ * Lesser General Public License as published by the Free Software Foundation.
+ *
+ * Copyright (C) 1999-2009 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/*  Selection parameter values for save-area save/restore macros:  */
+/*  Option vs. TIE:  */
+#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
+#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
+/*  Whether used automatically by compiler:  */
+#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
+/*  ABI handling across function calls:  */
+#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
+#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
+#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
+/*  Misc  */
+#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
+
+
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (8 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rsr	\at1, BR		// boolean option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rsr	\at1, SCOMPARE1		// conditional store option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	rur	\at1, THREADPTR		// threadptr option
+	s32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_store
+
+/* Macro to save all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Save area ptr (clobbered):  ptr  (8 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_NCP_NUM_ATMPS needed)
+ */
+	.macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start	\continue, \ofs
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wsr	\at1, BR		// boolean option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wsr	\at1, SCOMPARE1		// conditional store option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select
+	xchal_sa_align	\ptr, 0, 1024-4, 4, 4
+	l32i	\at1, \ptr, .Lxchal_ofs_ + 0
+	wur	\at1, THREADPTR		// threadptr option
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
+	.endif
+	.endm	// xchal_ncp_load
+
+
+
+#define XCHAL_NCP_NUM_ATMPS	1
+
+
+
+/* Macro to save the state of TIE coprocessor AudioEngineLX.
+ * Save area ptr (clobbered):  ptr  (8 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP1_NUM_ATMPS needed)
+ */
+#define xchal_cp_AudioEngineLX_store	xchal_cp1_store
+/* #define xchal_cp_AudioEngineLX_store_a2	xchal_cp1_store a2 a3 a4 a5 a6 */
+	.macro	xchal_cp1_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start \continue, \ofs
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 0, 1, 8
+	rur240	\at1		// AE_OVF_SAR
+	s32i	\at1, \ptr, 0
+	rur241	\at1		// AE_BITHEAD
+	s32i	\at1, \ptr, 4
+	rur242	\at1		// AE_TS_FTS_BU_BP
+	s32i	\at1, \ptr, 8
+	rur243	\at1		// AE_SD_NO
+	s32i	\at1, \ptr, 12
+	AE_SP24X2S.I aep0, \ptr,  16
+	AE_SP24X2S.I aep1, \ptr,  24
+	AE_SP24X2S.I aep2, \ptr,  32
+	AE_SP24X2S.I aep3, \ptr,  40
+	AE_SP24X2S.I aep4, \ptr,  48
+	AE_SP24X2S.I aep5, \ptr,  56
+	addi	\ptr, \ptr, 64
+	AE_SP24X2S.I aep6, \ptr,  0
+	AE_SP24X2S.I aep7, \ptr,  8
+	AE_SQ56S.I aeq0, \ptr,  16
+	AE_SQ56S.I aeq1, \ptr,  24
+	AE_SQ56S.I aeq2, \ptr,  32
+	AE_SQ56S.I aeq3, \ptr,  40
+	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 64
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 112
+	.endif
+	.endm	// xchal_cp1_store
+
+/* Macro to restore the state of TIE coprocessor AudioEngineLX.
+ * Save area ptr (clobbered):  ptr  (8 byte aligned)
+ * Scratch regs  (clobbered):  at1..at4  (only first XCHAL_CP1_NUM_ATMPS needed)
+ */
+#define xchal_cp_AudioEngineLX_load	xchal_cp1_load
+/* #define xchal_cp_AudioEngineLX_load_a2	xchal_cp1_load a2 a3 a4 a5 a6 */
+	.macro	xchal_cp1_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL
+	xchal_sa_start \continue, \ofs
+	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select
+	xchal_sa_align	\ptr, 0, 0, 1, 8
+	l32i	\at1, \ptr, 0
+	wur240	\at1		// AE_OVF_SAR
+	l32i	\at1, \ptr, 4
+	wur241	\at1		// AE_BITHEAD
+	l32i	\at1, \ptr, 8
+	wur242	\at1		// AE_TS_FTS_BU_BP
+	l32i	\at1, \ptr, 12
+	wur243	\at1		// AE_SD_NO
+	addi	\ptr, \ptr, 80
+	AE_LQ56.I aeq0, \ptr,  0
+	AE_LQ56.I aeq1, \ptr,  8
+	AE_LQ56.I aeq2, \ptr,  16
+	AE_LQ56.I aeq3, \ptr,  24
+	AE_LP24X2.I aep0, \ptr,  -64
+	AE_LP24X2.I aep1, \ptr,  -56
+	AE_LP24X2.I aep2, \ptr,  -48
+	AE_LP24X2.I aep3, \ptr,  -40
+	AE_LP24X2.I aep4, \ptr,  -32
+	AE_LP24X2.I aep5, \ptr,  -24
+	AE_LP24X2.I aep6, \ptr,  -16
+	AE_LP24X2.I aep7, \ptr,  -8
+	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 80
+	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 112
+	.endif
+	.endm	// xchal_cp1_load
+
+#define XCHAL_CP1_NUM_ATMPS	1
+#define XCHAL_SA_NUM_ATMPS	1
+
+	/*  Empty macros for unconfigured coprocessors:  */
+	.macro xchal_cp0_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp0_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp2_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp3_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp4_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp5_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp6_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp6_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+	.macro xchal_cp7_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
diff --git a/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie.h b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie.h
new file mode 100644
index 000000000000..fb1f5f004c92
--- /dev/null
+++ b/arch/xtensa/variants/test_mmuhifi_c3/include/variant/tie.h
@@ -0,0 +1,140 @@
+/*
+ * This header file describes this specific Xtensa processor's TIE extensions
+ * that extend basic Xtensa core functionality.  It is customized to this
+ * Xtensa processor configuration.
+ *
+ * This file is subject to the terms and conditions of version 2.1 of the GNU
+ * Lesser General Public License as published by the Free Software Foundation.
+ *
+ * Copyright (C) 1999-2009 Tensilica Inc.
+ */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM			1	/* number of coprocessors */
+#define XCHAL_CP_MAX			2	/* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK			0x02	/* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK		0x00	/* bitmask of only port CPs */
+
+/*  Basic parameters of each coprocessor:  */
+#define XCHAL_CP1_NAME			"AudioEngineLX"
+#define XCHAL_CP1_IDENT			AudioEngineLX
+#define XCHAL_CP1_SA_SIZE		112	/* size of state save area */
+#define XCHAL_CP1_SA_ALIGN		8	/* min alignment of save area */
+#define XCHAL_CP_ID_AUDIOENGINELX	1	/* coprocessor ID (0..7) */
+
+/*  Filler info for unassigned coprocessors, to simplify arrays etc:  */
+#define XCHAL_CP0_SA_SIZE		0
+#define XCHAL_CP0_SA_ALIGN		1
+#define XCHAL_CP2_SA_SIZE		0
+#define XCHAL_CP2_SA_ALIGN		1
+#define XCHAL_CP3_SA_SIZE		0
+#define XCHAL_CP3_SA_ALIGN		1
+#define XCHAL_CP4_SA_SIZE		0
+#define XCHAL_CP4_SA_ALIGN		1
+#define XCHAL_CP5_SA_SIZE		0
+#define XCHAL_CP5_SA_ALIGN		1
+#define XCHAL_CP6_SA_SIZE		0
+#define XCHAL_CP6_SA_ALIGN		1
+#define XCHAL_CP7_SA_SIZE		0
+#define XCHAL_CP7_SA_ALIGN		1
+
+/*  Save area for non-coprocessor optional and custom (TIE) state:  */
+#define XCHAL_NCP_SA_SIZE		12
+#define XCHAL_NCP_SA_ALIGN		4
+
+/*  Total save area for optional and custom state (NCP + CPn):  */
+#define XCHAL_TOTAL_SA_SIZE		128	/* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN		8	/* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE:  caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ *		dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ *	s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ *	ccused = set if used by compiler without special options or code
+ *	abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ *	kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ *	opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ *	name = lowercase reg name (no quotes)
+ *	galign = group byte alignment (power of 2) (galign >= align)
+ *	align = register byte alignment (power of 2)
+ *	asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ *	  (not including any pad bytes required to galign this or next reg)
+ *	dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ *	base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ *	regnum = reg index in regfile, or special/TIE-user reg number
+ *	bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ *	gapsz = intervening bits, if bitsz bits not stored contiguously
+ *	(padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ *	reset = register reset value (or 0 if undefined at reset)
+ *	x = reserved for future use (0 until then)
+ *
+ *  To filter out certain registers, e.g. to expand only the non-global
+ *  registers used by the compiler, you can do something like this:
+ *
+ *  #define XCHAL_SA_REG(s,ccused,p...)	SELCC##ccused(p)
+ *  #define SELCC0(p...)
+ *  #define SELCC1(abikind,p...)	SELAK##abikind(p)
+ *  #define SELAK0(p...)		REG(p)
+ *  #define SELAK1(p...)		REG(p)
+ *  #define SELAK2(p...)
+ *  #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ *		...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM	3
+#define XCHAL_NCP_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,0,1,             br, 4, 4, 4,0x0204,  sr,4  , 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1,      scompare1, 4, 4, 4,0x020C,  sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,2,1,1,      threadptr, 4, 4, 4,0x03E7,  ur,231, 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM	0
+#define XCHAL_CP0_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP1_SA_NUM	16
+#define XCHAL_CP1_SA_LIST(s)	\
+ XCHAL_SA_REG(s,0,0,1,0,     ae_ovf_sar, 8, 4, 4,0x03F0,  ur,240,  7,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,     ae_bithead, 4, 4, 4,0x03F1,  ur,241, 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,ae_ts_fts_bu_bp, 4, 4, 4,0x03F2,  ur,242, 16,0,0,0) \
+ XCHAL_SA_REG(s,0,0,1,0,       ae_sd_no, 4, 4, 4,0x03F3,  ur,243, 28,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep0, 8, 8, 8,0x0060, aep,0  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep1, 8, 8, 8,0x0061, aep,1  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep2, 8, 8, 8,0x0062, aep,2  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep3, 8, 8, 8,0x0063, aep,3  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep4, 8, 8, 8,0x0064, aep,4  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep5, 8, 8, 8,0x0065, aep,5  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep6, 8, 8, 8,0x0066, aep,6  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aep7, 8, 8, 8,0x0067, aep,7  , 48,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq0, 8, 8, 8,0x0068, aeq,0  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq1, 8, 8, 8,0x0069, aeq,1  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq2, 8, 8, 8,0x006A, aeq,2  , 56,0,0,0) \
+ XCHAL_SA_REG(s,0,0,2,0,           aeq3, 8, 8, 8,0x006B, aeq,3  , 56,0,0,0)
+
+#define XCHAL_CP2_SA_NUM	0
+#define XCHAL_CP2_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP3_SA_NUM	0
+#define XCHAL_CP3_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP4_SA_NUM	0
+#define XCHAL_CP4_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP5_SA_NUM	0
+#define XCHAL_CP5_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP6_SA_NUM	0
+#define XCHAL_CP6_SA_LIST(s)	/* empty */
+
+#define XCHAL_CP7_SA_NUM	0
+#define XCHAL_CP7_SA_LIST(s)	/* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX.  */
+#define XCHAL_OP0_FORMAT_LENGTHS	3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,8
+
+#endif /*_XTENSA_CORE_TIE_H*/